Application of an enriched FEM technique in thermo-mechanical contact problems

Science.gov (United States)

Khoei, A. R.; Bahmani, B.

2018-02-01

In this paper, an enriched FEM technique is employed for thermo-mechanical contact problem based on the extended finite element method. A fully coupled thermo-mechanical contact formulation is presented in the framework of X-FEM technique that takes into account the deformable continuum mechanics and the transient heat transfer analysis. The Coulomb frictional law is applied for the mechanical contact problem and a pressure dependent thermal contact model is employed through an explicit formulation in the weak form of X-FEM method. The equilibrium equations are discretized by the Newmark time splitting method and the final set of non-linear equations are solved based on the Newton-Raphson method using a staggered algorithm. Finally, in order to illustrate the capability of the proposed computational model several numerical examples are solved and the results are compared with those reported in literature.

Tool use and mechanical problem solving in apraxia.

Science.gov (United States)

Goldenberg, G; Hagmann, S

1998-07-01

Moorlaas (1928) proposed that apraxic patients can identify objects and can remember the purpose they have been made for but do not know the way in which they must be used to achieve that purpose. Knowledge about the use of objects and tools can have two sources: It can be based on retrieval of instructions of use from semantic memory or on a direct inference of function from structure. The ability to infer function from structure enables subjects to use unfamiliar tools and to detect alternative uses of familiar tools. It is the basis of mechanical problem solving. The purpose of the present study was to analyze retrieval of instruction of use, mechanical problem solving, and actual tool use in patients with apraxia due to circumscribed lesions of the left hemisphere. For assessing mechanical problem solving we developed a test of selection and application of novel tools. Access to instruction of use was tested by pantomime of tool use. Actual tool use was examined for the same familiar tools. Forty two patients with left brain damage (LBD) and aphasia, 22 patients with right brain damage (RBD) and 22 controls were examined. Only LBD patients differed from controls on all tests. RBD patients had difficulties with the use but not with the selection of novel tools. In LBD patients there was a significant correlation between pantomime of tool use and novel tool selection but there were single cases who scored in the defective range on one of these tests and normally on the other. Analysis of LBD patients' lesions suggested that frontal lobe damage does not disturb novel tool selection. Only LBD patients who failed on pantomime of object use and on novel tool selection committed errors in actual use of familiar tools. The finding that mechanical problem solving is invariably defective in apraxic patients who commit errors with familiar tools is in good accord with clinical observations, as the gravity of their errors goes beyond what one would expect as a mere sequel

Skeletal muscle mechanics: questions, problems and possible solutions.

Science.gov (United States)

Herzog, Walter

2017-09-16

Skeletal muscle mechanics have been studied ever since people have shown an interest in human movement. However, our understanding of muscle contraction and muscle mechanical properties has changed fundamentally with the discovery of the sliding filament theory in 1954 and associated cross-bridge theory in 1957. Nevertheless, experimental evidence suggests that our knowledge of the mechanisms of contraction is far from complete, and muscle properties and muscle function in human movement remain largely unknown.In this manuscript, I am trying to identify some of the crucial challenges we are faced with in muscle mechanics, offer possible solutions to questions, and identify problems that might be worthwhile exploring in the future. Since it is impossible to tackle all (worthwhile) problems in a single manuscript, I identified three problems that are controversial, important, and close to my heart. They may be identified as follows: (i) mechanisms of muscle contraction, (ii) in vivo whole muscle mechanics and properties, and (iii) force-sharing among synergistic muscles. These topics are fundamental to our understanding of human movement and movement control, and they contain a series of unknowns and challenges to be explored in the future.It is my hope that this paper may serve as an inspiration for some, may challenge current beliefs in selected areas, tackle important problems in the area of muscle mechanics, physiology and movement control, and may guide and focus some of the thinking of future muscle mechanics research.

Categorization of Quantum Mechanics Problems by Professors and Students

Science.gov (United States)

Lin, Shih-Yin; Singh, Chandralekha

2010-01-01

We discuss the categorization of 20 quantum mechanics problems by physics professors and undergraduate students from two honours-level quantum mechanics courses. Professors and students were asked to categorize the problems based upon similarity of solution. We also had individual discussions with professors who categorized the problems. Faculty…

Mechanics of materials formulas and problems : engineering mechanics 2

CERN Document Server

Gross, Dietmar; Wriggers, Peter; Schröder, Jörg; Müller, Ralf

2017-01-01

This book contains the most important formulas and more than 140 completely solved problems from Mechanics of Materials and Hydrostatics. It provides engineering students material to improve their skills and helps to gain experience in solving engineering problems. Particular emphasis is placed on finding the solution path and formulating the basic equations. Topics include: - Stress - Strain - Hooke’s Law - Tension and Compression in Bars - Bending of Beams - Torsion - Energy Methods - Buckling of Bars - Hydrostatics .

Radioactive wastes: present problems and future prospects

International Nuclear Information System (INIS)

Gauvenet, Andre

1975-01-01

The main characteristics of radioactive wastes are described and the present problems arising from liquid or gas effluents are considered. It is concluded that nuclear power stations are considerably less pollutant, at equal capacity, than conventional power stations. Programs of investigation are now being developed to meet with the foreseeable increase of activity. The problem is: first, to maintain absorbed doses at their present level and second, to study the problem of long-lived elements the storage of which would, in the long run create a nuisance on a world scale. The different waste storage techniques now in use are described and current investigations and works are exposed some of which, like vitrification, have already begun to be put into application. After having noted that the problem of wastes constitutes doubtless a difficulty in the technical field and, maybe even more so in the psychological field, the conditions are defined which will have to be met in order that this problem should not hinder the short- and long-term development of nuclear energy [fr

Lectures on quantum mechanics with problems, exercises and their solutions

CERN Document Server

Basdevant, Jean-Louis

2016-01-01

The new edition of this remarkable text offers the reader a conceptually strong introduction to quantum mechanics, but goes beyond this to present a fascinating tour of modern theoretical physics. Beautifully illustrated and engagingly written, it starts with a brief overview of diverse topics across physics including nanotechnology, statistical physics, materials science, astrophysics, and cosmology. The core of the book covers both established and emerging aspects of quantum mechanics. A concise introduction to traditional quantum mechanics covers the Schrödinger equation, Hilbert space, the algebra of observables, hydrogen atom, spin and Pauli principle. Modern features of the field are presented by exploring entangled states, Bell's inequality, quantum cryptography, quantum teleportation and quantum mechanics in the universe. This new edition has been enchanced through the addition of numerous problems with detailed solutions, an introduction to the mathematical tools needed and expanded discussion of th...

Theoretical physics 3. Quantum mechanics 1 with problems in MAPLE

International Nuclear Information System (INIS)

Reineker, P.; Schulz, M.; Schulz, B.M.

2007-01-01

The following topics are dealt with: Historically heuristic introduction to quantum mechanics, the Schroedinger equation, foundations of quantum mechanics, the linear harmonic oscillator, quantum-mechanical motion in the central field, approximation methods for the solution of quantum mechanical problems, motion of particles in the electromagnetic field, spin and magnetic moment of the electron, many-particle systems, conceptional problems of quantum mechanics

Game Theoretic Problems in Network Economics and Mechanism Design Solutions

CERN Document Server

Narahari, Y; Narayanam, Ramasuri; Prakash, Hastagiri

2009-01-01

Explores game theoretic modeling and mechanism design for problem solving in Internet and network economics. This monograph contains an exposition of representative game theoretic problems in three different network economics situations and a systematic exploration of mechanism design solutions to these problems.

Problem solving and inference mechanisms

Energy Technology Data Exchange (ETDEWEB)

Furukawa, K; Nakajima, R; Yonezawa, A; Goto, S; Aoyama, A

1982-01-01

The heart of the fifth generation computer will be powerful mechanisms for problem solving and inference. A deduction-oriented language is to be designed, which will form the core of the whole computing system. The language is based on predicate logic with the extended features of structuring facilities, meta structures and relational data base interfaces. Parallel computation mechanisms and specialized hardware architectures are being investigated to make possible efficient realization of the language features. The project includes research into an intelligent programming system, a knowledge representation language and system, and a meta inference system to be built on the core. 30 references.

Students' Epistemological Framing in Quantum Mechanics Problem Solving

Science.gov (United States)

Modir, Bahar; Thompson, John D.; Sayre, Eleanor C.

2017-01-01

Students' difficulties in quantum mechanics may be the result of unproductive framing and not a fundamental inability to solve the problems or misconceptions about physics content. We observed groups of students solving quantum mechanics problems in an upper-division physics course. Using the lens of epistemological framing, we investigated four…

EDF analysis of hydrogen problem on present NPPs

International Nuclear Information System (INIS)

Guieu, S.

1997-01-01

By letter dated March 1995, Electricite de France (EDF) has sent to the French Safety Authority (called DSIN, depending jointly from Industry and Environment Ministries) its position, for Present NPPs, regarding three main topics concerning severe accidents pointed by DSIN: hydrogen problem; high pressure core melt risk; and instrumentation. Concerning 'hydrogen problem', EDF answer is not only a state-of-the art analysis but intend to answer the question of the need (or not) for implementation of countermeasures in Present French NPPs. This position is presently under review by DSIN and its Technical Supports. (author)

Direct methods of solution for problems in mechanics from invariance principles

International Nuclear Information System (INIS)

Rajan, M.

1986-01-01

Direct solutions to problems in mechanics are developed from variational statements derived from the principle of invariance of the action integral under a one-parameter family of infinitesimal transformations. Exact, direct solution procedures for linear systems are developed by a careful choice of the arbitrary functions used to generate the infinitesimal transformations. It is demonstrated that the well-known methods for the solution of differential equations can be directly adapted to the required variational statements. Examples in particle and continuum mechanics are presented

Exploring quantum mechanics a collection of 700+ solved problems for students, lecturers, and researchers

CERN Document Server

Galitski, Victor; Kogan, Vladimir; Galitski, Victor Jr

2013-01-01

A series of seminal technological revolutions has led to a new generation of electronic devices miniaturized to such tiny scales where the strange laws of quantum physics come into play. There is no doubt that, unlike scientists and engineers of the past, technology leaders of the future will have to rely on quantum mechanics in their everyday work. This makes teaching and learning the subject of paramount importance for further progress. Mastering quantum physics is a very non-trivial task and its deep understanding can only be achieved through working out real-life problems and examples. It is notoriously difficult to come up with new quantum-mechanical problems that would be solvable with a pencil and paper, and within a finite amount of time. This book remarkably presents some 700+ original problems in quantum mechanics together with detailed solutions covering nearly 1000 pages on all aspects of quantum science. The material is largely new to the English-speaking audience. The problems have been collect...

The two-capacitor problem revisited: a mechanical harmonic oscillator model approach

International Nuclear Information System (INIS)

Lee, Keeyung

2009-01-01

The well-known two-capacitor problem, in which exactly half the stored energy disappears when a charged capacitor is connected to an identical capacitor, is discussed based on the mechanical harmonic oscillator model approach. In the mechanical harmonic oscillator model, it is shown first that exactly half the work done by a constant applied force is dissipated irrespective of the form of dissipation mechanism when the system comes to a new equilibrium after a constant force is abruptly applied. This model is then applied to the energy loss mechanism in the capacitor charging problem or the two-capacitor problem. This approach allows a simple explanation of the energy dissipation mechanism in these problems and shows that the dissipated energy should always be exactly half the supplied energy whether that is caused by the Joule heat or by the radiation. This paper, which provides a simple treatment of the energy dissipation mechanism in the two-capacitor problem, is suitable for all undergraduate levels

Neighbourhood generation mechanism applied in simulated annealing to job shop scheduling problems

Science.gov (United States)

Cruz-Chávez, Marco Antonio

2015-11-01

This paper presents a neighbourhood generation mechanism for the job shop scheduling problems (JSSPs). In order to obtain a feasible neighbour with the generation mechanism, it is only necessary to generate a permutation of an adjacent pair of operations in a scheduling of the JSSP. If there is no slack time between the adjacent pair of operations that is permuted, then it is proven, through theory and experimentation, that the new neighbour (schedule) generated is feasible. It is demonstrated that the neighbourhood generation mechanism is very efficient and effective in a simulated annealing.

Mechanical problem-solving strategies in Alzheimer's disease and semantic dementia.

Science.gov (United States)

Lesourd, Mathieu; Baumard, Josselin; Jarry, Christophe; Etcharry-Bouyx, Frédérique; Belliard, Serge; Moreaud, Olivier; Croisile, Bernard; Chauviré, Valérie; Granjon, Marine; Le Gall, Didier; Osiurak, François

2016-07-01

The goal of this study was to explore whether the tool-use disorders observed in Alzheimer's disease (AD) and semantic dementia (SD) are of the same nature as those observed in left brain-damaged (LBD) patients. Recent evidence indicates that LBD patients with apraxia of tool use encounter difficulties in solving mechanical problems, characterized by the absence of specific strategies. This pattern may show the presence of impaired mechanical knowledge, critical for both familiar and novel tool use. So, we explored the strategies followed by AD and SD patients in mechanical problem-solving tasks in order to determine whether mechanical knowledge is also impaired in these patients. We used a mechanical problem-solving task in both choice (i.e., several tools were proposed) and no-choice (i.e., only 1 tool was proposed) conditions. We analyzed quantitative data and strategy profiles. AD patients but not SD patients met difficulties in solving mechanical problem-solving tasks. However, the key finding is that AD patients, despite their difficulties, showed strategy profiles that are similar to that of SD patients or controls. Moreover, AD patients exhibited a strategy profile distinct from the one previously observed in LBD patients. Those observations lead us to consider that difficulties met by AD patients to solve mechanical problems or even to use familiar tools may not be caused by mechanical knowledge impairment per se. In broad terms, what we call apraxia of tool use in AD is certainly not the same as apraxia of tool use observed in LBD patients. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Radiology and radiation protection. Present-day problems

International Nuclear Information System (INIS)

Andrieu, L.

1978-01-01

With the development of nuclear energy the present-day problems of radioprotection are studied in the light of new radiobiological knowledge. The following points are analysed in turn: radioprotection norms, the notion of acceptable risk; influence of dose rate and fractionation; the low-dose problem; relative biological effectiveness (RBE) and quality factor (Q.F.); the biological problem of long-term effects. The genetic risk due to accepted radioprotection norms is estimated. The part played by radioprotection organisations is underlined, with emphasis on the fact that radioactivity is the most strictly and effectively regulated of all industrial inconveniences. It is pointed out that medical irradiation is not subject to the legislations and regulations listed [fr

Substantiating problems of quantum mechanics

International Nuclear Information System (INIS)

Gottlieb, J.

1978-05-01

Some basic problems, related to the spaces and the operators necessary to describe quantum-mechanical phenomena, are entered upon from a new axiomatic standpoint. Some generalizations are operated, required by convergence criteria, concerning the Fourier transform, the Fourier product and the equation of eigen-values. Physical arguments are brought to support such generalizations and an analysis in view of organizing the structure of the proposed spaces is undertaken. (author)

Application of symbolic and algebraic manipulation software in solving applied mechanics problems

Science.gov (United States)

Tsai, Wen-Lang; Kikuchi, Noboru

1993-01-01

As its name implies, symbolic and algebraic manipulation is an operational tool which not only can retain symbols throughout computations but also can express results in terms of symbols. This report starts with a history of symbolic and algebraic manipulators and a review of the literatures. With the help of selected examples, the capabilities of symbolic and algebraic manipulators are demonstrated. These applications to problems of applied mechanics are then presented. They are the application of automatic formulation to applied mechanics problems, application to a materially nonlinear problem (rigid-plastic ring compression) by finite element method (FEM) and application to plate problems by FEM. The advantages and difficulties, contributions, education, and perspectives of symbolic and algebraic manipulation are discussed. It is well known that there exist some fundamental difficulties in symbolic and algebraic manipulation, such as internal swelling and mathematical limitation. A remedy for these difficulties is proposed, and the three applications mentioned are solved successfully. For example, the closed from solution of stiffness matrix of four-node isoparametrical quadrilateral element for 2-D elasticity problem was not available before. Due to the work presented, the automatic construction of it becomes feasible. In addition, a new advantage of the application of symbolic and algebraic manipulation found is believed to be crucial in improving the efficiency of program execution in the future. This will substantially shorten the response time of a system. It is very significant for certain systems, such as missile and high speed aircraft systems, in which time plays an important role.

Computational performance of Free Mesh Method applied to continuum mechanics problems

Science.gov (United States)

YAGAWA, Genki

2011-01-01

The free mesh method (FMM) is a kind of the meshless methods intended for particle-like finite element analysis of problems that are difficult to handle using global mesh generation, or a node-based finite element method that employs a local mesh generation technique and a node-by-node algorithm. The aim of the present paper is to review some unique numerical solutions of fluid and solid mechanics by employing FMM as well as the Enriched Free Mesh Method (EFMM), which is a new version of FMM, including compressible flow and sounding mechanism in air-reed instruments as applications to fluid mechanics, and automatic remeshing for slow crack growth, dynamic behavior of solid as well as large-scale Eigen-frequency of engine block as applications to solid mechanics. PMID:21558753

Problems in Quantum Mechanics with Solutions

CERN Document Server

d'Emilio, Emilio

2011-01-01

242 solved problems of several degrees of difficulty in nonrelativistic Quantum Mechanics, ranging from the themes of the crisis of classical physics, through the achievements in the framework of modern atomic physics, down to the still alive, more intriguing aspects connected e.g. with the EPR paradox, the Aharonov--Bohm effect, quantum teleportation.

On the problem of time in quantum mechanics

Science.gov (United States)

Bauer, M.

2017-05-01

The problem of time in quantum mechanics (QM) concerns the fact that in the Schrödinger equation time is a parameter, not an operator. Pauli's objection to a time-energy uncertainty relation analogue to the position-momentum one, conjectured by Heisenberg early on, seemed to exclude the existence of such an operator. However Dirac's formulation of an electron's relativistic QM does allow the introduction of a dynamical time operator that is self-adjoint. Consequently, it can be considered as the generator of a unitary transformation of the system, as well as an additional system observable subject to uncertainty. In the present paper these aspects are examined within the standard framework of relativistic QM.

Present problems of the solar interior

International Nuclear Information System (INIS)

Roxburgh, I.W.

1986-01-01

The standard model of solar evolution is reviewed and a number of problems highlighted. A fundamental question is whether there is any mixing of matter in the central regions, since such mixing could radically alter the model of the present Sun and modify our understanding of the evolution of other stars. Standard models of solar evolution become unstable to /sup 3/He driven global oscillations at an age of 3 x 10/sup 8/ years and this may drive some mixing, even if this is not the case the finite amptitude limit of these oscillations is likely to produce modifications in the standard model. Convective overshooting at the bottom of the outer convective zone leads to an increased depth of this zone and small changes in the interior. It is pointed out that the young Sun had a /sup 12/C driven convective core whose extent and duration depends on the extend of overshooting. Such a core is likely to produce a magnetic field which will affect the internal dynamics. The internal rotation of the sun remains an enigma and absence of knowledge of any internal magnetic field makes it difficult to study the problem. Rotationally driven instabilities are ineffective in the central chemically inhomogeneous regions but may contribute to the inward diffusion of lithium from the convective zone. These and other problems are considered, but few solutions are proposed

Two-body quantum mechanical problem on spheres

OpenAIRE

Shchepetilov, Alexey V.

2005-01-01

The quantum mechanical two-body problem with a central interaction on the sphere ${\\bf S}^{n}$ is considered. Using recent results in representation theory an ordinary differential equation for some energy levels is found. For several interactive potentials these energy levels are calculated in explicit form.

Impedance model for quantum-mechanical barrier problems

International Nuclear Information System (INIS)

Nelin, Evgenii A

2007-01-01

Application of the impedance model to typical quantum-mechanical barrier problems, including those for structures with resonant electron tunneling, is discussed. The efficiency of the approach is illustrated. The physical transparency and compactness of the model and its potential as a teaching and learning tool are discussed. (methodological notes)

Video-based problems in introductory mechanics physics courses

International Nuclear Information System (INIS)

Gröber, Sebastian; Klein, Pascal; Kuhn, Jochen

2014-01-01

Introductory mechanics physics courses at the transition from school to university are a challenge for students. They are faced with an abrupt and necessary increase of theoretical content and requirements on their conceptual understanding of phyiscs. In order to support this transition we replaced part of the mandatory weekly theory-based paper-and-pencil problems with video analysis problems of equal content and level of difficulty. Video-based problems (VBP) are a new problem format for teaching physics from a linked sequence of theoretical and video-based experimental tasks. Experimental tasks are related to the well-known concept of video motion analysis. This introduction of an experimental part in recitations allows the establishment of theory–experiment interplay as well as connections between physical content and context fields such as nature, technique, everyday life and applied physics by conducting model-and context-related experiments. Furthermore, laws and formulas as predominantly representative forms are extended by the use of diagrams and vectors. In this paper we give general reasons for this approach, describe the structure and added values of VBP, and show that they cover a relevant part of mechanics courses at university. Emphasis is put on theory–experiment interplay as a structural added value of VBP to promote students' construction of knowledge and conceptual understanding. (paper)

Counting in Lattices: Combinatorial Problems from Statistical Mechanics.

Science.gov (United States)

Randall, Dana Jill

In this thesis we consider two classical combinatorial problems arising in statistical mechanics: counting matchings and self-avoiding walks in lattice graphs. The first problem arises in the study of the thermodynamical properties of monomers and dimers (diatomic molecules) in crystals. Fisher, Kasteleyn and Temperley discovered an elegant technique to exactly count the number of perfect matchings in two dimensional lattices, but it is not applicable for matchings of arbitrary size, or in higher dimensional lattices. We present the first efficient approximation algorithm for computing the number of matchings of any size in any periodic lattice in arbitrary dimension. The algorithm is based on Monte Carlo simulation of a suitable Markov chain and has rigorously derived performance guarantees that do not rely on any assumptions. In addition, we show that these results generalize to counting matchings in any graph which is the Cayley graph of a finite group. The second problem is counting self-avoiding walks in lattices. This problem arises in the study of the thermodynamics of long polymer chains in dilute solution. While there are a number of Monte Carlo algorithms used to count self -avoiding walks in practice, these are heuristic and their correctness relies on unproven conjectures. In contrast, we present an efficient algorithm which relies on a single, widely-believed conjecture that is simpler than preceding assumptions and, more importantly, is one which the algorithm itself can test. Thus our algorithm is reliable, in the sense that it either outputs answers that are guaranteed, with high probability, to be correct, or finds a counterexample to the conjecture. In either case we know we can trust our results and the algorithm is guaranteed to run in polynomial time. This is the first algorithm for counting self-avoiding walks in which the error bounds are rigorously controlled. This work was supported in part by an AT&T graduate fellowship, a University of

The Brandeis Dice Problem and Statistical Mechanics

Science.gov (United States)

van Enk, Steven J.

2014-11-01

Jaynes invented the Brandeis Dice Problem as a simple illustration of the MaxEnt (Maximum Entropy) procedure that he had demonstrated to work so well in Statistical Mechanics. I construct here two alternative solutions to his toy problem. One, like Jaynes' solution, uses MaxEnt and yields an analog of the canonical ensemble, but at a different level of description. The other uses Bayesian updating and yields an analog of the micro-canonical ensemble. Both, unlike Jaynes' solution, yield error bars, whose operational merits I discuss. These two alternative solutions are not equivalent for the original Brandeis Dice Problem, but become so in what must, therefore, count as the analog of the thermodynamic limit, M-sided dice with M → ∞. Whereas the mathematical analogies between the dice problem and Stat Mech are quite close, there are physical properties that the former lacks but that are crucial to the workings of the latter. Stat Mech is more than just MaxEnt.

Students' Conceptual Difficulties in Quantum Mechanics: Potential Well Problems

Science.gov (United States)

Ozcan, Ozgur; Didis, Nilufer; Tasar, Mehmet Fatih

2009-01-01

In this study, students' conceptual difficulties about some basic concepts in quantum mechanics like one-dimensional potential well problems and probability density of tunneling particles were identified. For this aim, a multiple choice instrument named Quantum Mechanics Conceptual Test has been developed by one of the researchers of this study…

Statistical mechanics of the vertex-cover problem

Science.gov (United States)

Hartmann, Alexander K.; Weigt, Martin

2003-10-01

We review recent progress in the study of the vertex-cover problem (VC). The VC belongs to the class of NP-complete graph theoretical problems, which plays a central role in theoretical computer science. On ensembles of random graphs, VC exhibits a coverable-uncoverable phase transition. Very close to this transition, depending on the solution algorithm, easy-hard transitions in the typical running time of the algorithms occur. We explain a statistical mechanics approach, which works by mapping the VC to a hard-core lattice gas, and then applying techniques such as the replica trick or the cavity approach. Using these methods, the phase diagram of the VC could be obtained exactly for connectivities c e, the solution of the VC exhibits full replica symmetry breaking. The statistical mechanics approach can also be used to study analytically the typical running time of simple complete and incomplete algorithms for the VC. Finally, we describe recent results for the VC when studied on other ensembles of finite- and infinite-dimensional graphs.

Statistical mechanics of the vertex-cover problem

International Nuclear Information System (INIS)

Hartmann, Alexander K; Weigt, Martin

2003-01-01

We review recent progress in the study of the vertex-cover problem (VC). The VC belongs to the class of NP-complete graph theoretical problems, which plays a central role in theoretical computer science. On ensembles of random graphs, VC exhibits a coverable-uncoverable phase transition. Very close to this transition, depending on the solution algorithm, easy-hard transitions in the typical running time of the algorithms occur. We explain a statistical mechanics approach, which works by mapping the VC to a hard-core lattice gas, and then applying techniques such as the replica trick or the cavity approach. Using these methods, the phase diagram of the VC could be obtained exactly for connectivities c e, the solution of the VC exhibits full replica symmetry breaking. The statistical mechanics approach can also be used to study analytically the typical running time of simple complete and incomplete algorithms for the VC. Finally, we describe recent results for the VC when studied on other ensembles of finite- and infinite-dimensional graphs

Element Verification and Comparison in Sierra/Solid Mechanics Problems

Energy Technology Data Exchange (ETDEWEB)

Ohashi, Yuki; Roth, William

2016-05-01

The goal of this project was to study the effects of element selection on the Sierra/SM solutions to five common solid mechanics problems. A total of nine element formulations were used for each problem. The models were run multiple times with varying spatial and temporal discretization in order to ensure convergence. The first four problems have been compared to analytical solutions, and all numerical results were found to be sufficiently accurate. The penetration problem was found to have a high mesh dependence in terms of element type, mesh discretization, and meshing scheme. Also, the time to solution is shown for each problem in order to facilitate element selection when computer resources are limited.

The effects of presenting multidigit mathematics problems in a realistic context on sixth graders' problem solving

NARCIS (Netherlands)

Hickendorff, M.

2013-01-01

Mathematics education and assessments increasingly involve arithmetic problems presented in context: a realistic situation that requires mathematical modeling. This study assessed the effects of such typical school mathematics contexts on two aspects of problem solving: performance and strategy use.

The Application of Problem-Based Learning in Mechanical Engineering

Science.gov (United States)

Putra, Z. A.; Dewi, M.

2018-02-01

The course of Technology and Material Testing prepare students with the ability to do a variety of material testing in the study of mechanical engineering. Students find it difficult to understand the materials to make them unable to carry out the material testing in accordance with the purpose of study. This happens because they knowledge is not adequately supported by the competence to find and construct learning experience. In this study, quasy experiment research method with pre-post-test with control group design was used. The subjects of the study were students divided in two groups; control and experiment with twenty-two students in each group. Study result: their grades showed no difference in between the pre-test or post-test in control group, but the difference in grade existed between the pre-test and post-test in experiment group. Yet, there is no significant difference in the study result on both groups. The researcher recommend that it is necessary to develop Problem-Based Learning that suits need analysis on D3 Program for Mechanical Engineering Department at the State University of Padang, to ensure the compatibility between Model of Study and problems and need. This study aims to analyze how Problem-Based Learning effects on the course of Technology and Material Testing for the students of D3 Program of Mechanical Engineering of the State University of Padang.

Substitution Relationship Between The Agency Problem Control Mechanisms in Malaysia: Simultaneous Equation Analysis

Directory of Open Access Journals (Sweden)

D. Agus Harjito

2009-05-01

Full Text Available This study investigates the substitution relationship (substitutability between debt policy, insider ownership, and dividend policy as the agency problem control mechanism in Malaysia. If the substitution relationship exists between the agency control mechanisms, the agency problem can be reduced through this relationship. Reducing the agency problem as a result can increase the firm value proxied by Tobin’s Q. This study employs 396 firms sample listed on Malaysian Bourse from 2001 to 2004. To achieves the objectives, this study uses two-stage least square method. The results of this study indicate that the substitutability between debt policy, insider ownership, and dividend policy as agency problem control mechanism does not fully exist in Malaysia. Apparently the substitutability only exists for debt policy and dividend. There is no substitution between debt policy and insider ownership as well as between dividend policy and insider ownership. Key words: debt policy, insider ownership, dividend policy, agency problem, firm value

Physics. Examples and problems. Mechanics, heat, electricity and magnetism, oscillations and waves, atomic and nuclear physics

International Nuclear Information System (INIS)

Stroppe, Heribert; Streitenberger, Peter; Specht, Eckard; Zeitler, Juergen; Langer, Heinz

2017-01-01

The present book is the unification of the proved problem collections for the basic physical training of studyings of especially engineering courses at technical colleges and universities. The book contains - didactically prepared and structured in the style of a textbook as well as with increasing difficulty - a total of 960 exemplary and additional tasks from the fields mechanics, heat, electricity and magnetism, oscillations and waves, as well as atomic and nuclear physics. For the exemplary problems the whole solution path and the complete calculation process with explanation of the relevant physical laws are extensively presented, for the additional problems for the self-control only the solutions and, if necessary, intermediate calculations are given. The examples and problems with mostly practice-oriented content are selected in such a way that they largely cover the matter treated in courses and exercises and make by their didactical preparation an effective repetition and optimal examination-preparation possible.

Component simulation in problems of calculated model formation of automatic machine mechanisms

OpenAIRE

Telegin Igor; Kozlov Alexander; Zhirkov Alexander

2017-01-01

The paper deals with the problems of the component simulation method application in the problems of the automation of the mechanical system model formation with the further possibility of their CAD-realization. The purpose of the investigations mentioned consists in the automation of the CAD-model formation of high-speed mechanisms in automatic machines and in the analysis of dynamic processes occurred in their units taking into account their elasto-inertial properties, power dissipation, gap...

Solid mechanics theory, modeling, and problems

CERN Document Server

Bertram, Albrecht

2015-01-01

This textbook offers an introduction to modeling the mechanical behavior of solids within continuum mechanics and thermodynamics. To illustrate the fundamental principles, the book starts with an overview of the most important models in one dimension. Tensor calculus, which is called for in three-dimensional modeling, is concisely presented in the second part of the book. Once the reader is equipped with these essential mathematical tools, the third part of the book develops the foundations of continuum mechanics right from the beginning. Lastly, the book’s fourth part focuses on modeling the mechanics of materials and in particular elasticity, viscoelasticity and plasticity. Intended as an introductory textbook for students and for professionals interested in self-study, it also features numerous worked-out examples to aid in understanding.

Economic disadvantage and young children's emotional and behavioral problems: mechanisms of risk.

Science.gov (United States)

Rijlaarsdam, Jolien; Stevens, Gonneke W J M; van der Ende, Jan; Hofman, Albert; Jaddoe, Vincent W V; Mackenbach, Johan P; Verhulst, Frank C; Tiemeier, Henning

2013-01-01

This study aimed to establish potential mechanisms through which economic disadvantage contributes to the development of young children's internalizing and externalizing problems. Prospective data from fetal life to age 3 years were collected in a total of 2,169 families participating in the Generation R Study. The observed physical home environment, the provision of learning materials in the home, maternal depressive symptoms, parenting stress, and harsh disciplining practices were all analyzed as potential mediators of the association between economic disadvantage and children's internalizing and externalizing problem scores. Findings from structural equation modeling showed that for both internalizing and externalizing problems, the mechanisms underlying the effect of economic disadvantage included maternal depressive symptoms, along with parenting stress and harsh disciplining. For internalizing but not for externalizing problem scores, the lack of provision of learning materials in the home was an additional mechanism explaining the effect of economic disadvantage. The current results suggest that interventions that focus solely on raising income levels may not adequately address problems in the family processes that emerge as a result of economic disadvantage. Policies to improve the mental health of mothers with young children but also their home environments are needed to change the economic gradient in child behavior.

Present status and problems of marine reactor

International Nuclear Information System (INIS)

1987-01-01

The activities of the Research Committee on Marine Reactors are summarized, and the present status of marine reactors on the world is reviewed. The characteristics of marine reactors are discussed, and the prospect and problems of the research and development of an advanced marine reactor in Japan are reported. This Committee was established in fiscal year 1983, when the 'Mutsu' project was going to be on the right track, and the project of developing an advanced marine reactor was advanced. During four years since then, it has carried out the investigation and exchanged opinion about the activities and results of the research in foreign countries and Japan and the problems peculiar to marine reactors, that is, making small size and light weight reactors, the rolling and pitching, vibration and impact of ship hulls, the competitive power against conventional ships and so on. The idea of utilizing atomic energy for ship propulsion preceded that of electricity generation, and it was materialized in 1955 by the submarine 'Nautilus'. Now more than 300 nuclear war ships have been commissioned. Also nuclear merchant ships have been built, but the research and development were interrupted because of their economical efficiency. (Kako, I.)

Present-day Problems and Methods of Optimization in Mechatronics

Directory of Open Access Journals (Sweden)

Tarnowski Wojciech

2017-06-01

Full Text Available It is justified that design is an inverse problem, and the optimization is a paradigm. Classes of design problems are proposed and typical obstacles are recognized. Peculiarities of the mechatronic designing are specified as a proof of a particle importance of optimization in the mechatronic design. Two main obstacles of optimization are discussed: a complexity of mathematical models and an uncertainty of the value system, in concrete case. Then a set of non-standard approaches and methods are presented and discussed, illustrated by examples: a fuzzy description, a constraint-based iterative optimization, AHP ranking method and a few MADM functions in Matlab.

Mechanical engineering problems in the TFTR neutral beam system

International Nuclear Information System (INIS)

Cannon, D.D.; Bryant, E.H.; Johnson, R.L.; Kim, J.; Queen, C.C.; Schilling, G.

1975-01-01

A conceptual design of a prototype beam line for the TFTR Neutral Beam System has been developed. The basic components have been defined, cost estimates prepared, and the necessary development programs identified. Four major mechanical engineering problems, potential solutions and the required development programs are discussed

Statistical and stochastic aspects of the delocalization problem in quantum mechanics

International Nuclear Information System (INIS)

Claverie, P.; Diner, S.

1976-01-01

The space-time behaviour of electrons in atoms and molecules is reviewed. The wave conception of the electron is criticized and the poverty of the non-reductionist attitude is underlined. Further, the two main interpretations of quantum mechanics are recalled: the Copenhagen and the Statistical Interpretations. The meaning and the successes of the Statistical Interpretation are explained and it is shown that it does not solve all problems because quantum mechanics is irreducible to a classical statistical theory. The fluctuation of the particle number and its relationship to loge theory, delocalization and correlation is studied. Finally, different stochastic models for microphysics are reviewed. The markovian Fenyes-Nelson process allows an interpretation of the original heuristic considerations of Schroedinger. Non-markov processes with Schroedinger time evolution are shown to be equivalent to the base state analysis of Feynmann but they are unsatisfactory from a probabilistic point of view. Stochastic electrodynamics is presented as the most satisfactory conception nowadays

The measurement problem in quantum mechanics: A phenomenological investigation

Science.gov (United States)

Hunter, Joel Brooks

2008-10-01

This dissertation is a phenomenological investigation of the measurement problem in quantum mechanics. The primary subject matter for description and analysis is scientific instruments and their use in experiments which elicit the measurement problem. A methodological critique is mounted against the ontological commitments taken for granted in the canonical interpretations of quantum theory and the scientific activity of measurement as the necessary interface between theoretical interest and perceptual results. I argue that an aesthetic dimension of reality functions as aproto-scientific establishment of sense-making that constantly operates to set integratively all other cognitively neat determinations, including scientifically rendered objects that are intrinsically non-visualizable. The way in which data "key in" to the original and originative register of the sensible in observation is clarified by examining prostheses, measuring apparatuses and instruments that are sense-conveying and -integrative with the human sensorium. Experiments, technology and instrumentation are examined in order to understand how knowing and that which is known is bonded by praxis-aisthesis. Quantum measurement is a praxic-dynamie activity and homologically structured and structur ing functional engagement in terms of instantiation, quantifiability, and spatiotemporal differentiation. The distinctions between a beauty-aesthetic and praxis-aisthesis are delineated. It is argued that a beauty-aesthetic is a construal of the economic dimension of scientific objects and work, and is not the primary manner in which the aesthetic dimension is disclosed. The economic dimension of abstractions reduces to an austere aesthetic of calculative economy. Nature itself, however, is not stingy; it is intrinsically capacious, extravagant, full of surprise, nuance, ambiguity and allusiveness. The capaciousness of Nature and the way in which we are integratively set within Nature in a materiality

Effect of Computer-Presented Organizational/Memory Aids on Problem Solving Behavior.

Science.gov (United States)

Steinberg, Esther R.; And Others

This research studied the effects of computer-presented organizational/memory aids on problem solving behavior. The aids were either matrix or verbal charts shown on the display screen next to the problem. The 104 college student subjects were randomly assigned to one of the four conditions: type of chart (matrix or verbal chart) and use of charts…

Enhancing Students' Communication Skills through Problem Posing and Presentation

Science.gov (United States)

Sugito; E. S., Sri Mulyani; Hartono; Supartono

2017-01-01

This study was to explore how enhance communication skill through problem posing and presentation method. The subjects of this research were the seven grade students Junior High School, including 20 male and 14 female. This research was conducted in two cycles and each cycle consisted of four steps, they were: planning, action, observation, and…

The Two-Capacitor Problem Revisited: A Mechanical Harmonic Oscillator Model Approach

Science.gov (United States)

Lee, Keeyung

2009-01-01

The well-known two-capacitor problem, in which exactly half the stored energy disappears when a charged capacitor is connected to an identical capacitor, is discussed based on the mechanical harmonic oscillator model approach. In the mechanical harmonic oscillator model, it is shown first that "exactly half" the work done by a constant applied…

Solving problems in fluid mechanics. Vol. 1

International Nuclear Information System (INIS)

Douglas, J.F.

1986-01-01

Fluid mechanics is that part of applied mechanics concerned with the statics and dynamics of liquids and gases. The presentation is in a pedagogically sound question-and-answer format, which includes many worked examples preceding the exercises. This book which assumes only an elementary knowledge of mathematics and mechanics, offers a clear exposition of topics including hydrostatics, fluid pressure and the stability of floating bodies, fluid motion, flow measurement, pipelines, open channel flow, and fluid friction

Modeling nonlinear problems in the mechanics of strings and rods the role of the balance laws

CERN Document Server

O'Reilly, Oliver M

2017-01-01

This book presents theories of deformable elastic strings and rods and their application to broad classes of problems. Readers will gain insights into the formulation and analysis of models for mechanical and biological systems. Emphasis is placed on how the balance laws interplay with constitutive relations to form a set of governing equations. For certain classes of problems, it is shown how a balance of material momentum can play a key role in forming the equations of motion. The first half of the book is devoted to the purely mechanical theory of a string and its applications. The second half of the book is devoted to rod theories, including Euler’s theory of the elastica, Kirchhoff ’s theory of an elastic rod, and a range of Cosserat rod theories. A variety of classic and recent applications of these rod theories are examined. Two supplemental chapters, the first on continuum mechanics of three-dimensional continua and the second on methods from variational calculus, are included to provide relevant ...

Innovation and problem solving: a review of common mechanisms.

Science.gov (United States)

Griffin, Andrea S; Guez, David

2014-11-01

Behavioural innovations have become central to our thinking about how animals adjust to changing environments. It is now well established that animals vary in their ability to innovate, but understanding why remains a challenge. This is because innovations are rare, so studying innovation requires alternative experimental assays that create opportunities for animals to express their ability to invent new behaviours, or use pre-existing ones in new contexts. Problem solving of extractive foraging tasks has been put forward as a suitable experimental assay. We review the rapidly expanding literature on problem solving of extractive foraging tasks in order to better understand to what extent the processes underpinning problem solving, and the factors influencing problem solving, are in line with those predicted, and found, to underpin and influence innovation in the wild. Our aim is to determine whether problem solving can be used as an experimental proxy of innovation. We find that in most respects, problem solving is determined by the same underpinning mechanisms, and is influenced by the same factors, as those predicted to underpin, and to influence, innovation. We conclude that problem solving is a valid experimental assay for studying innovation, propose a conceptual model of problem solving in which motor diversity plays a more central role than has been considered to date, and provide recommendations for future research using problem solving to investigate innovation. This article is part of a Special Issue entitled: Cognition in the wild. Copyright © 2014 Elsevier B.V. All rights reserved.

Mechanical structure and problem of thorium molten salt reactor

International Nuclear Information System (INIS)

Kamei, Takashi

2011-01-01

After Fukushima Daiichi accident, there became great interest in Thorium Molten Salt Reactor (MSR) for the safety as station blackout leading to auto drainage of molten salts with freeze valve. This article described mechanical structure of MSR and problems of materials and pipes. Material corrosion problem by molten salts would be solved using modified Hastelloy N with Ti and Nb added, which should be confirmed by operation of an experimental reactor. Trends in international activities of MSR were also referred including China declaring MSR development in January 2011 to solve thorium contamination issues at rare earth production and India rich in thorium resources. (T. Tanaka)

Component simulation in problems of calculated model formation of automatic machine mechanisms

Directory of Open Access Journals (Sweden)

Telegin Igor

2017-01-01

Full Text Available The paper deals with the problems of the component simulation method application in the problems of the automation of the mechanical system model formation with the further possibility of their CAD-realization. The purpose of the investigations mentioned consists in the automation of the CAD-model formation of high-speed mechanisms in automatic machines and in the analysis of dynamic processes occurred in their units taking into account their elasto-inertial properties, power dissipation, gaps in kinematic pairs, friction forces, design and technological loads. As an example in the paper there are considered a formalization of stages in the computer model formation of the cutting mechanism in cold stamping automatic machine AV1818 and methods of for the computation of their parameters on the basis of its solid-state model.

Fracture Mechanics Analyses for Interface Crack Problems - A Review

Science.gov (United States)

Krueger, Ronald; Shivakumar, Kunigal; Raju, Ivatury S.

2013-01-01

Recent developments in fracture mechanics analyses of the interfacial crack problem are reviewed. The intent of the review is to renew the awareness of the oscillatory singularity at the crack tip of a bimaterial interface and the problems that occur when calculating mode mixity using numerical methods such as the finite element method in conjunction with the virtual crack closure technique. Established approaches to overcome the nonconvergence issue of the individual mode strain energy release rates are reviewed. In the recent literature many attempts to overcome the nonconvergence issue have been developed. Among the many approaches found only a few methods hold the promise of providing practical solutions. These are the resin interlayer method, the method that chooses the crack tip element size greater than the oscillation zone, the crack tip element method that is based on plate theory and the crack surface displacement extrapolation method. Each of the methods is validated on a very limited set of simple interface crack problems. However, their utility for a wide range of interfacial crack problems is yet to be established.

Bayesian inverse problems for functions and applications to fluid mechanics

International Nuclear Information System (INIS)

Cotter, S L; Dashti, M; Robinson, J C; Stuart, A M

2009-01-01

In this paper we establish a mathematical framework for a range of inverse problems for functions, given a finite set of noisy observations. The problems are hence underdetermined and are often ill-posed. We study these problems from the viewpoint of Bayesian statistics, with the resulting posterior probability measure being defined on a space of functions. We develop an abstract framework for such problems which facilitates application of an infinite-dimensional version of Bayes theorem, leads to a well-posedness result for the posterior measure (continuity in a suitable probability metric with respect to changes in data), and also leads to a theory for the existence of maximizing the posterior probability (MAP) estimators for such Bayesian inverse problems on function space. A central idea underlying these results is that continuity properties and bounds on the forward model guide the choice of the prior measure for the inverse problem, leading to the desired results on well-posedness and MAP estimators; the PDE analysis and probability theory required are thus clearly dileneated, allowing a straightforward derivation of results. We show that the abstract theory applies to some concrete applications of interest by studying problems arising from data assimilation in fluid mechanics. The objective is to make inference about the underlying velocity field, on the basis of either Eulerian or Lagrangian observations. We study problems without model error, in which case the inference is on the initial condition, and problems with model error in which case the inference is on the initial condition and on the driving noise process or, equivalently, on the entire time-dependent velocity field. In order to undertake a relatively uncluttered mathematical analysis we consider the two-dimensional Navier–Stokes equation on a torus. The case of Eulerian observations—direct observations of the velocity field itself—is then a model for weather forecasting. The case of

Thoracic vasculitis presenting as surgical problems.

LENUS (Irish Health Repository)

Jansen, Michael

2010-01-01

We present four patients with vasculitis manifesting with unusual clinical or pathological features, generating surgical problems. Two cases presented with pulmonary hypertension, with investigations and radiological evidence prompting clinical suspicion of pulmonary thrombo-embolic disease. First case, with an antecedant history of Wegener\\'s granulomatosis (WG), demonstrated following "embolectomy", WG involving the large pulmonary elastic arteries. The second case of inoperable "pulmonary thrombo-embolic disease" was subsequently found at limited post mortem to have giant cell arteritis, which affected widespread small peripheral pulmonary arterial vessels. The other two cases were of aortitis occurring in the background of immune-mediated disease, which had been treated with aggressive immunosuppression regimens. The first of these was a case of Cogan\\'s syndrome complicated by descending aortitis, a rarely reported phenomenon, with co-existent acute endocarditis of the aortic valve leaflets. Most cases of endocarditis in this context occur secondary to and in continuity with ascending aortitis. That this case, and a case of ascending aortitis occurring in the context of relapsing polychondritis occurred in the face of aggressive immunosuppression with an apparent clinical response, underscores the need to not accept a clinical picture at face value. This has implications for clinical management, particularly in the follow-up of surgical prosthetic devices such as grafts which may be used in these cases. All four cases emphasise the continued importance of histology and the post-mortem examination in elucidating previously undetected or unsuspected disease.

Mechanism Design for Single Leader Stackelberg Problems and Application to Procurement Auction Design

OpenAIRE

Garg, Dinesh; Narahari, Y

2008-01-01

In this paper, we focus on mechanism design for single leader Stackelberg problems, which are a special case of hierarchical decision making problems in which a distinguished agent, known as the leader, makes the first move and this action is followed by the actions of the remaining agents, which are known as the followers. These problems are also known as single leader rest follower (SLRF) problems. There are many examples of such problems in the areas of electronic commerce, supply chain ma...

Statistical mechanical analysis of linear programming relaxation for combinatorial optimization problems

Science.gov (United States)

Takabe, Satoshi; Hukushima, Koji

2016-05-01

Typical behavior of the linear programming (LP) problem is studied as a relaxation of the minimum vertex cover (min-VC), a type of integer programming (IP) problem. A lattice-gas model on the Erdös-Rényi random graphs of α -uniform hyperedges is proposed to express both the LP and IP problems of the min-VC in the common statistical mechanical model with a one-parameter family. Statistical mechanical analyses reveal for α =2 that the LP optimal solution is typically equal to that given by the IP below the critical average degree c =e in the thermodynamic limit. The critical threshold for good accuracy of the relaxation extends the mathematical result c =1 and coincides with the replica symmetry-breaking threshold of the IP. The LP relaxation for the minimum hitting sets with α ≥3 , minimum vertex covers on α -uniform random graphs, is also studied. Analytic and numerical results strongly suggest that the LP relaxation fails to estimate optimal values above the critical average degree c =e /(α -1 ) where the replica symmetry is broken.

Statistical mechanical analysis of linear programming relaxation for combinatorial optimization problems.

Science.gov (United States)

Takabe, Satoshi; Hukushima, Koji

2016-05-01

Typical behavior of the linear programming (LP) problem is studied as a relaxation of the minimum vertex cover (min-VC), a type of integer programming (IP) problem. A lattice-gas model on the Erdös-Rényi random graphs of α-uniform hyperedges is proposed to express both the LP and IP problems of the min-VC in the common statistical mechanical model with a one-parameter family. Statistical mechanical analyses reveal for α=2 that the LP optimal solution is typically equal to that given by the IP below the critical average degree c=e in the thermodynamic limit. The critical threshold for good accuracy of the relaxation extends the mathematical result c=1 and coincides with the replica symmetry-breaking threshold of the IP. The LP relaxation for the minimum hitting sets with α≥3, minimum vertex covers on α-uniform random graphs, is also studied. Analytic and numerical results strongly suggest that the LP relaxation fails to estimate optimal values above the critical average degree c=e/(α-1) where the replica symmetry is broken.

Theoretical physics IV. Quantum mechanics with problems in MAPLE

International Nuclear Information System (INIS)

Reinecker, Peter; Schulz, Michael; Schulz, Beatrix M.

2008-01-01

Quantum mechanics 2 is the fourth volume of the new and unique series for theoretical physics with Maple applications. This from basics newly concipated series mediates theoretical physics from contemporary view and in a way referring to a comprehensive lecture experience. Extensively and completely in five consecutively appearing volumes classical mechanics, electrodynamics, quantum mechanics 1 and 2, as well as statistical physics and thermodynamics are presented. Additionally for the elegant and extensive presentation on an each added CP applications for MAPLE trademark are contained, the software, which at more and more university is already applied in the lecture. They allow the experimenting with theory - and facilitate the understanding essentially. The present volume mediates extending, more complex contents of quantum mechanics, which are based on volume III of the series

A Direct Kinematics Problem Solution for the Three-degree-of-freedom Parallel Structure Manipulator Based on Crank Mechanism

Directory of Open Access Journals (Sweden)

V. N. Paschenko

2015-01-01

Full Text Available The paper describes a mechanism representing a kind of mechanisms of parallel kinematics with three degrees of freedom based on the crank mechanism. This mechanism consists of two platforms, namely: the lower fixed and the upper movable. The upper platform is connected to the lower one by six movable elements, three of which are rods attached to the bases by means of spherical joints, and another three have a crank structure.The paper shows an approach to the solution of a direct task of kinematics based on mathematical modeling. The inverse problem of kinematics is formulated as follows: at specified angles of rotation drive (the values of generalized coordinates to determine the position of the top mobile platform.To solve this problem has been used a mathematical model describing the proposed system. On the basis of the constructed model were made the necessary calculations that allowed us using the values of crank angles connected with the engines to determine the position of the platform in space. To solve the problem we used the method of virtual points to reduce the number of equations and unknowns, which determine the position of the upper platform in space, at a crucial system from eighteen to nine, thus simplifying the solution.To check the solution correctness was carried out numerical experiment. Each generalized coordinate took on values in the range from -30 ° to 30 °; for them a direct positional problem was solved, and its result was inserted, as initial data, in the previous solved and proven inverse problem on the position of the platform under study.The paper presents comparative results of measurements with the calculated values of the generalized coordinates and draws the appropriate conclusions, that this model is in good compliance with the results observed in practice. One of the distinctive features of the proposed approach is that rotation angles of engines are used as the generalized coordinates. This allowed us

Micronutrient problems in Thailand - extent, past and present research

International Nuclear Information System (INIS)

Snitwongse, P.

1975-01-01

Micronutrient problems in Thailand are briefly discussed, particularly with reference to rice. At present, the relative amounts of zinc in rice-growing areas (soils) are being analyzed for total and available zinc. Fertilizer (N, P, K) uptake by rice is being studied in the field by means of zinc-65. Observations on the relative uptake of P by rice associated with different zinc levels are made on pot cultures, using phosphorus-32

Mathematical Model and Algorithm for the Reefer Mechanic Scheduling Problem at Seaports

Directory of Open Access Journals (Sweden)

Jiantong Zhang

2017-01-01

Full Text Available With the development of seaborne logistics, the international trade of goods transported in refrigerated containers is growing fast. Refrigerated containers, also known as reefers, are used in transportation of temperature sensitive cargo, such as perishable fruits. This trend brings new challenges to terminal managers, that is, how to efficiently arrange mechanics to plug and unplug power for the reefers (i.e., tasks at yards. This work investigates the reefer mechanics scheduling problem at container ports. To minimize the sum of the total tardiness of all tasks and the total working distance of all mechanics, we formulate a mathematical model. For the resolution of this problem, we propose a DE algorithm which is combined with efficient heuristics, local search strategies, and parameter adaption scheme. The proposed algorithm is tested and validated through numerical experiments. Computational results demonstrate the effectiveness and efficiency of the proposed algorithm.

An adaptive singular ES-FEM for mechanics problems with singular field of arbitrary order

OpenAIRE

Nguyen-Xuan, H.; Liu, G. R.; Bordas, Stéphane; Natarajan, S.; Rabczuk, T.

2013-01-01

This paper presents a singular edge-based smoothed finite element method (sES-FEM) for mechanics problems with singular stress fields of arbitrary order. The sES-FEM uses a basic mesh of three-noded linear triangular (T3) elements and a special layer of five-noded singular triangular elements (sT5) connected to the singular-point of the stress field. The sT5 element has an additional node on each of the two edges connected to the singular-point. It allows us to represent simple and efficient ...

Problems in Microgravity Fluid Mechanics: G-Jitter Convection

Science.gov (United States)

Homsy, G. M.

2005-01-01

This is the final report on our NASA grant, Problems in Microgravity Fluid Mechanics NAG3-2513: 12/14/2000 - 11/30/2003, extended through 11/30/2004. This grant was made to Stanford University and then transferred to the University of California at Santa Barbara when the PI relocated there in January 2001. Our main activity has been to conduct both experimental and theoretical studies of instabilities in fluids that are relevant to the microgravity environment, i.e. those that do not involve the action of buoyancy due to a steady gravitational field. Full details of the work accomplished under this grant are given below. Our work has focused on: (i) Theoretical and computational studies of the effect of g-jitter on instabilities of convective states where the convection is driven by forces other than buoyancy (ii) Experimental studies of instabilities during displacements of miscible fluid pairs in tubes, with a focus on the degree to which these mimic those found in immiscible fluids. (iii) Theoretical and experimental studies of the effect of time dependent electrohydrodynamic forces on chaotic advection in drops immersed in a second dielectric liquid. Our objectives are to acquire insight and understanding into microgravity fluid mechanics problems that bear on either fundamental issues or applications in fluid physics. We are interested in the response of fluids to either a fluctuating acceleration environment or to forces other than gravity that cause fluid mixing and convection. We have been active in several general areas.

Computational problems in engineering

CERN Document Server

Mladenov, Valeri

2014-01-01

This book provides readers with modern computational techniques for solving variety of problems from electrical, mechanical, civil and chemical engineering. Mathematical methods are presented in a unified manner, so they can be applied consistently to problems in applied electromagnetics, strength of materials, fluid mechanics, heat and mass transfer, environmental engineering, biomedical engineering, signal processing, automatic control and more.   • Features contributions from distinguished researchers on significant aspects of current numerical methods and computational mathematics; • Presents actual results and innovative methods that provide numerical solutions, while minimizing computing times; • Includes new and advanced methods and modern variations of known techniques that can solve difficult scientific problems efficiently.  

Caring for children with learning disabilities who present problem behaviours: a maternal perspective.

Science.gov (United States)

Johnson, Robert F; O'Reilly, Michelle; Vostanis, Panos

2006-09-01

The theoretical cognitive model of stress and coping provides a structure to obtain and analyse maternal perceptions of caring for children with learning disabilities who present severe problem behaviours. The Family Fund database identified 18 families who met the sample criteria of children aged five years to 15 years with severe to moderate learning disability presenting severe problem behaviour. Physical aggression was reported to be the primary behavioural problem for 13 of the children. Interviews undertaken with the main carer of the child at their home were taped and transcribed. The data were analysed using grounded theory techniques which identified 'secondary stressors' for the parent. These were social isolation, conflict, limitation of lifestyle and self-blame. It is proposed that the amalgamated impact of these can weaken parents' coping resources and, therefore, may prove to be as significant to the negative association with maternal wellbeing as the problem behaviour.

Cracking Problems and Mechanical Characteristics of PME and BME Ceramic Capacitors

Science.gov (United States)

Teverovsky, Alexander

2018-01-01

Most failures in MLCCs are caused by cracking that create shorts between opposite electrodes of the parts. A use of manual soldering makes this problem especially serious for space industry. Experience shows that different lots of ceramic capacitors might have different susceptibility to cracking under manual soldering conditions. This simulates a search of techniques that would allow revealing capacitors that are most robust to soldering-induced stresses. Currently, base metal electrode (BME) capacitors are introduced to high-reliability applications as a replacement of precious metal electrode (PME) parts. Understanding the difference in the susceptibility to cracking between PME and BME capacitors would facilitate this process. This presentation gives a review of mechanical characteristics measured in-situ on MLCCs that includes flexural strength, Vickers hardness, indentation fracture toughness, and the board flex testing and compare characteristics of BME and PME capacitors. A history case related to cracking in PME capacitors that caused flight system malfunctions and mechanisms of failure are considered. Possible qualification tests that would allow evaluation of the resistance of MLCCs to manual soldering are suggested and perspectives related to introduction of BME capacitors discussed.

Variational Multiscale error estimator for anisotropic adaptive fluid mechanic simulations: application to convection-diffusion problems

OpenAIRE

Bazile , Alban; Hachem , Elie; Larroya-Huguet , Juan-Carlos; Mesri , Youssef

2018-01-01

International audience; In this work, we present a new a posteriori error estimator based on the Variational Multiscale method for anisotropic adaptive fluid mechanics problems. The general idea is to combine the large scale error based on the solved part of the solution with the sub-mesh scale error based on the unresolved part of the solution. We compute the latter with two different methods: one using the stabilizing parameters and the other using bubble functions. We propose two different...

Wrong capital? Problems with recognition of knowledge presented by non-native students in international education

DEFF Research Database (Denmark)

Wilken, Lisanne

This paper presents research on problems of knowledge recognition among students of various nationalities at an international organisation......This paper presents research on problems of knowledge recognition among students of various nationalities at an international organisation...

Mechanical design problems associated with turbopump fluid film bearings

Science.gov (United States)

Evces, Charles R.

1990-01-01

Most high speed cryogenic turbopumps for liquid propulsion rocket engines currently use ball or roller contact bearings for rotor support. The operating speeds, loads, clearances, and environments of these pumps combine to make bearing wear a limiting factor on turbopump life. An example is the high pressure oxygen turbopump (HPOTP) used in the Space Shuttle Main Engine (SSME). Although the HPOTP design life is 27,000 seconds at 30,000 rpms, or approximately 50 missions, bearings must currently be replaced after 2 missions. One solution to the bearing wear problem in the HPOTP, as well as in future turbopump designs, is the utilization of fluid film bearings in lieu of continuous contact bearings. Hydrostatic, hydrodynamic, and damping seal bearings are all replacement candidates for contact bearings in rocket engine high speed turbomachinery. These three types of fluid film bearings have different operating characteristics, but they share a common set of mechanical design opportunities and difficulties. Results of research to define some of the mechanical design issues are given. Problems considered include transient strat/stop rub, non-operational rotor support, bearing wear inspection and measurement, and bearing fluid supply route. Emphasis is given to the HPOTP preburner pump (PBP) bearing, but the results are pertinent to high-speed cryogenic turbomachinery in general.

Does parent-child agreement vary based on presenting problems? Results from a UK clinical sample.

Science.gov (United States)

Cleridou, Kalia; Patalay, Praveetha; Martin, Peter

2017-01-01

Discrepancies are often found between child and parent reports of child psychopathology, nevertheless the role of the child's presenting difficulties in relation to these is underexplored. This study investigates whether parent-child agreement on the conduct and emotional scales of the Strengths and Difficulties Questionnaire (SDQ) varied as a result of certain child characteristics, including the child's presenting problems to clinical services, age and gender. The UK-based sample consisted of 16,754 clinical records of children aged 11-17, the majority of which were female (57%) and White (76%). The dataset was provided by the Child Outcomes Research Consortium , which collects outcome measures from child services across the UK. Clinicians reported the child's presenting difficulties, and parents and children completed the SDQ. Using correlation analysis, the main findings indicated that agreement varied as a result of the child's difficulties for reports of conduct problems, and this seemed to be related to the presence or absence of externalising difficulties in the child's presentation. This was not the case for reports of emotional difficulties. In addition, agreement was higher when reporting problems not consistent with the child's presentation; for instance, agreement on conduct problems was greater for children presenting with internalising problems. Lastly, the children's age and gender did not seem to have an impact on agreement. These findings demonstrate that certain child presenting difficulties, and in particular conduct problems, may be related to informant agreement and need to be considered in clinical practice and research. Trial Registration This study was observational and as such did not require trial registration.

Advances in quantum mechanics contemporary trends and open problems

CERN Document Server

Dell'Antonio, Gianfausto

2017-01-01

This volume collects recent contributions on the contemporary trends in the mathematics of quantum mechanics, and more specifically in mathematical problems arising in quantum many-body dynamics, quantum graph theory, cold atoms, unitary gases, with particular emphasis on the developments of the specific mathematical tools needed, including: linear and non-linear Schrödinger equations, topological invariants, non-commutative geometry, resonances and operator extension theory, among others. Most of contributors are international leading experts or respected young researchers in mathematical physics, PDE, and operator theory. All their material is the fruit of recent studies that have already become a reference in the community. Offering a unified perspective of the mathematics of quantum mechanics, it is a valuable resource for researchers in the field.

Investigation of balancing problem for a planar mechanism using genetic algorithm

International Nuclear Information System (INIS)

Erkaya, Selcuk

2013-01-01

In this study, optimal balancing of a planar articulated mechanism is investigated to minimize the shaking force and moment fluctuations. Balancing of a four-bar mechanism is formulated as an optimization problem. On the other hand, an objective function based on the sub-components of shaking force and moment is constituted, and design variables consisting of kinematic and dynamic parameters are defined. Genetic algorithm is used to solve the optimization problem under the appropriate constraints. By using commercial simulation software, optimized values of design variables are also tested to evaluate the effectiveness of the proposed optimization process. This work provides a practical method for reducing the shaking force and moment fluctuations. The results show that both the structure of objective function and particularly the selection of weighting factors have a crucial role to obtain the optimum values of design parameters. By adjusting the value of weighting factor according to the relative sensitivity of the related term, there is a certain decrease at the shaking force and moment fluctuations. Moreover, these arrangements also decrease the initiative of mechanism designer on choosing the values of weighting factors.

A general formulation of discrete-time quantum mechanics: Restrictions on the action and the relation of unitarity to the existence theorem for initial-value problems

International Nuclear Information System (INIS)

Khorrami, M.

1995-01-01

A general formulation for discrete-time quantum mechanics, based on Feynman's method in ordinary quantum mechanics, is presented. It is shown that the ambiguities present in ordinary quantum mechanics (due to noncommutativity of the operators), are no longer present here. Then the criteria for the unitarity of the evolution operator are examined. It is shown that the unitarity of the evolution operator puts restrictions on the form of the action, and also implies the existence of a solution for the classical initial-value problem. 13 refs

Computer-Presented Organizational/Memory Aids as Instruction for Solving Pico-Fomi Problems.

Science.gov (United States)

Steinberg, Esther R.; And Others

1985-01-01

Describes investigation of effectiveness of computer-presented organizational/memory aids (matrix and verbal charts controlled by computer or learner) as instructional technique for solving Pico-Fomi problems, and the acquisition of deductive inference rules when such aids are present. Results indicate chart use control should be adapted to…

Nodal methods for problems in fluid mechanics and neutron transport

International Nuclear Information System (INIS)

Azmy, Y.Y.

1985-01-01

A new high-accuracy, coarse-mesh, nodal integral approach is developed for the efficient numerical solution of linear partial differential equations. It is shown that various special cases of this general nodal integral approach correspond to several high efficiency nodal methods developed recently for the numerical solution of neutron diffusion and neutron transport problems. The new approach is extended to the nonlinear Navier-Stokes equations of fluid mechanics; its extension to these equations leads to a new computational method, the nodal integral method which is implemented for the numerical solution of these equations. Application to several test problems demonstrates the superior computational efficiency of this new method over previously developed methods. The solutions obtained for several driven cavity problems are compared with the available experimental data and are shown to be in very good agreement with experiment. Additional comparisons also show that the coarse-mesh, nodal integral method results agree very well with the results of definitive ultra-fine-mesh, finite-difference calculations for the driven cavity problem up to fairly high Reynolds numbers

Novel Problem Solving - The NASA Solution Mechanism Guide

Science.gov (United States)

Keeton, Kathryn E.; Richard, Elizabeth E.; Davis, Jeffrey R.

2014-01-01

Over the past five years, the Human Health and Performance (HH&P) Directorate at the NASA Johnson Space Center (JSC) has conducted a number of pilot and ongoing projects in collaboration and open innovation. These projects involved the use of novel open innovation competitions that sought solutions from "the crowd", non-traditional problem solvers. The projects expanded to include virtual collaboration centers such as the NASA Human Health and Performance Center (NHHPC) and more recently a collaborative research project between NASA and the National Science Foundation (NSF). These novel problem-solving tools produced effective results and the HH&P wanted to capture the knowledge from these new tools, to teach the results to the directorate, and to implement new project management tools and coursework. The need to capture and teach the results of these novel problem solving tools, the HH&P decided to create a web-based tool to capture best practices and case studies, to teach novice users how to use new problem solving tools and to change project management training/. This web-based tool was developed with a small, multi-disciplinary group and named the Solution Mechanism Guide (SMG). An alpha version was developed that was tested against several sessions of user groups to get feedback on the SMG and determine a future course for development. The feedback was very positive and the HH&P decided to move to the beta-phase of development. To develop the web-based tool, the HH&P utilized the NASA Tournament Lab (NTL) to develop the software with TopCoder under an existing contract. In this way, the HH&P is using one new tool (the NTL and TopCoder) to develop the next generation tool, the SMG. The beta-phase of the SMG is planed for release in the spring of 2014 and results of the beta-phase testing will be available for the IAC meeting in September. The SMG is intended to disrupt the way problem solvers and project managers approach problem solving and to increase the

The mechanism distinguishability problem in biochemical kinetics: the single-enzyme, single-substrate reaction as a case study.

Science.gov (United States)

Schnell, Santiago; Chappell, Michael J; Evans, Neil D; Roussel, Marc R

2006-01-01

A theoretical analysis of the distinguishability problem of two rival models of the single enzyme-single substrate reaction, the Michaelis-Menten and Henri mechanisms, is presented. We also outline a general approach for analysing the structural indistinguishability between two mechanisms. The approach involves constructing, if possible, a smooth mapping between the two candidate models. Evans et al. [N.D. Evans, M.J. Chappell, M.J. Chapman, K.R. Godfrey, Structural indistinguishability between uncontrolled (autonomous) nonlinear analytic systems, Automatica 40 (2004) 1947-1953] have shown that if, in addition, either of the mechanisms satisfies a particular criterion then such a transformation always exists when the models are indistinguishable from their experimentally observable outputs. The approach is applied to the single enzyme-single substrate reaction mechanism. In principle, mechanisms can be distinguished using this analysis, but we show that our ability to distinguish mechanistic models depends both on the precise measurements made, and on our knowledge of the system prior to performing the kinetics experiments.

Psychological factors, sociodemographic characteristics, and coping mechanisms associated with the self-stigma of problem gambling.

Science.gov (United States)

Hing, Nerilee; Russell, Alex M T

2017-09-01

Background and aims Few studies have examined the stigma of problem gambling and little is known about those who internalize this prejudice as damaging self-stigma. This paper aimed to identify psychological factors, sociodemographic characteristics, and coping mechanisms associated with the self-stigma of problem gambling. Methods An online survey was conducted on 177 Australian adults with a current gambling problem to measure self-stigma, self-esteem, social anxiety, self-consciousness, psychological distress, symptom severity, most problematic gambling form, stigma coping mechanisms, and sociodemographic characteristics. Results All variables significantly correlated with self-stigma were considered for inclusion in a regression model. A multivariate linear regression indicated that higher levels of self-stigma were associated with: being female, being older, lower self-esteem, higher problem gambling severity score, and greater use of secrecy (standardized coefficients: 0.16, 0.14, -0.33, 0.23, and 0.15, respectively). Strongest predictors in the model were self-esteem, followed by symptom severity score. Together, predictors in the model accounted for 38.9% of the variance in self-stigma. Discussion and conclusions These results suggest that the self-stigma of problem gambling may be driven by similar mechanisms as the self-stigma of other mental health disorders, and impact similarly on self-esteem and coping. Thus, self-stigma reduction initiatives used for other mental health conditions may be effective for problem gambling. In contrast, however, the self-stigma of problem gambling increased with female gender and older age, which are associated with gaming machine problems. This group should, therefore, be a target population for efforts to reduce or better cope with the self-stigma of problem gambling.

Numerical Solutions of Mechanical Turbulent Filtration Equation Used in Mechatronics and Micro Mechanic

OpenAIRE

Hassan Fathabadi

2013-01-01

In this study, several novel numerical solutions are presented to solve the turbulent filtration equation and its special case called “Non-Newtonian mechanical filtration equation”. The turbulent filtration equation in porous media is a very important equation which has many applications to solve the problems appearing especially in mechatronics, micro mechanic and fluid mechanic. Many applied mechanical problems can be solved using this equation. For example, non-Newtonian mechanical filtrat...

Presentation of an approach for the analysis of the mechanical response of propellant under a large spectrum of loadings: numerical and mechanical issues

Science.gov (United States)

Fanget, Alain

2009-06-01

Many authors claim that to understand the response of a propellant, specifically under quasi static and dynamic loading, the mesostructural morphology and the mechanical behaviour of each of its components have to be known. However the scale of the mechanical description of the behaviour of a propellant is relative to its heterogeneities and the wavelength of loading. The shorter it is, the more important the topological description of the material is. In our problems, involving the safety of energetic materials, the propellant can be subjected to a large spectrum of loadings. This presentation is divided into five parts. The first part describes the processes used to extract the information about the morphology of the meso-structure of the material and presents some results. The results, the difficulties and the perspectives for this part will be recalled. The second part determines the physical processes involved at this scale from experimental results. Taking into account the knowledge of the morphology, two ways have been chosen to describe the response of the material. One concerns the quasi static loading, the object of the third part, in which we show how we use the mesoscopic scale as a base of development to build constitutive models. The fourth part presents for low but dynamic loading the comparison between numerical analysis and experiments.

Visual, Algebraic and Mixed Strategies in Visually Presented Linear Programming Problems.

Science.gov (United States)

Shama, Gilli; Dreyfus, Tommy

1994-01-01

Identified and classified solution strategies of (n=49) 10th-grade students who were presented with linear programming problems in a predominantly visual setting in the form of a computerized game. Visual strategies were developed more frequently than either algebraic or mixed strategies. Appendix includes questionnaires. (Contains 11 references.)…

Reputation mechanism: From resolution for truthful online auctions to the model of optimal one-gambler problem

Energy Technology Data Exchange (ETDEWEB)

Bradonjic, Milan [Los Alamos National Laboratory

2009-01-01

In this paper we study reputation mechanisms, and show how the notion of reputation can help us in building truthful online auction mechanisms. From the mechanism design prospective, we derive the conditions on and design a truthful online auction mechanism. Moreover, in the case when some agents may lay or cannot have the real knowledge about the other agents reputations, we derive the resolution of the auction, such that the mechanism is truthful. Consequently, we move forward to the optimal one-gambler/one-seller problem, and explain how that problem is refinement of the previously discussed online auction design in the presence of reputation mechanism. In the setting of the optimal one-gambler problem, we naturally rise and solve the specific question: What is an agent's optimal strategy, in order to maximize his revenue? We would like to stress that our analysis goes beyond the scope, which game theory usually discusses under the notion of reputation. We model one-player games, by introducing a new parameter (reputation), which helps us in predicting the agent's behavior, in real-world situations, such as, behavior of a gambler, real-estate dealer, etc.

Spectral methods and their implementation to solution of aerodynamic and fluid mechanic problems

Science.gov (United States)

Streett, C. L.

1987-01-01

Fundamental concepts underlying spectral collocation methods, especially pertaining to their use in the solution of partial differential equations, are outlined. Theoretical accuracy results are reviewed and compared with results from test problems. A number of practical aspects of the construction and use of spectral methods are detailed, along with several solution schemes which have found utility in applications of spectral methods to practical problems. Results from a few of the successful applications of spectral methods to problems of aerodynamic and fluid mechanic interest are then outlined, followed by a discussion of the problem areas in spectral methods and the current research under way to overcome these difficulties.

Some problems in mechanics of growing solids with applications to AM technologies

Science.gov (United States)

Manzhirov, A. V.

2018-04-01

Additive Manufacturing (AM) technologies are an exciting area of the modern industrial revolution and have applications in engineering, medicine, electronics, aerospace industry, etc. AM enables cost-effective production of customized geometry and parts by direct fabrication from 3D data and mathematical models. Despite much progress in AM technologies, problems of mechanical analysis for AM fabricated parts yet remain to be solved. This paper deals with three main mechanical problems: the onset of residual stresses, which occur in the AM process and can lead to failure of the parts, the distortion of the final shape of AM fabricated parts, and the development of technological solutions aimed at improving existing AM technologies and creating new ones. An approach proposed deals with the construction of adequate analytical model and effective methods for the simulation of AM processes for fabricated solid parts.

General presentation of projects mechanisms

International Nuclear Information System (INIS)

2003-01-01

This guide provides recommendations and tools to implement projects mechanisms, in the framework of the kyoto protocol. It precises the place of the projects mechanisms in the display of tools involved in the climatic change fight policies, at the national as international scale. It recalls the main characteristics and the rules of utilization and illustrates the corresponding interests. (A.L.B.)

Problems in classical and quantum mechanics extracting the underlying concepts

CERN Document Server

Kelley, J Daniel

2017-01-01

This book is a collection of problems intended to aid students in their graduate courses in physics and in preparing for the PhD qualifying exam. Thus, the included problems are of the type that could be on a qualifying exam or are problems that are meant to elucidate a principle that is important for the exam. Unlike other compilations of problems, the problems in this text are placed in the broader context of the subject. The goal of the book is to develop the problem solving skills of the reader to insure a complete understanding of the physics. Problems and solutions are presented in detail, and, additionally, their significance is discussed within the context of the physical principle(s) that they illustrate. The solution of the problem is only the beginning of the learning process--it is in manipulating the solution and changing the parameters that a great deal of insight can be gleaned. This technique is referred to by the authors as "massaging the problem," and it is a technique that the authors have ...

The difference between the classical and quantum mechanical definitions of scattering cross sections and the problem of the classical limit

International Nuclear Information System (INIS)

Sen, D.; Basu, A.N.; Sengupta, S.

1994-01-01

A critical analysis of the difference between the classical and quantum mechanical definitions of scattering cross sections for particles is presented. This leads to a clarification of the classical limit problem and suggests precise criteria for its validity. In particular these criteria are derived for both finite and infinite range potentials. (orig.)

Computational problems in science and engineering

CERN Document Server

Bulucea, Aida; Tsekouras, George

2015-01-01

This book provides readers with modern computational techniques for solving variety of problems from electrical, mechanical, civil and chemical engineering. Mathematical methods are presented in a unified manner, so they can be applied consistently to problems in applied electromagnetics, strength of materials, fluid mechanics, heat and mass transfer, environmental engineering, biomedical engineering, signal processing, automatic control and more.

Problems and the present status of radiation educational curriculum

International Nuclear Information System (INIS)

Hiroi, Tadashi; Muraishi, Yukimasa; Mikado, Shogo; Watanabe, Tomohiro

1999-01-01

To examine teaching curriculum for radiation education requires a collective and extensive consideration on various subjects from many fields. The present study has been made from 4 points of view, namely 'physics', physics experiment', 'chemistry', and 'general science'. In 'physics', a curriculum in which learning about radiation followed by learning Newtonian mechanics was examined. Some group experiments taking radiation as the subject, a curriculum including radiation and radioactivity in high school chemistry course and general science are proposed and discussed briefly. (S. Ohno)

Application of computational fluid mechanics to atmospheric pollution problems

Science.gov (United States)

Hung, R. J.; Liaw, G. S.; Smith, R. E.

1986-01-01

One of the most noticeable effects of air pollution on the properties of the atmosphere is the reduction in visibility. This paper reports the results of investigations of the fluid dynamical and microphysical processes involved in the formation of advection fog on aerosols from combustion-related pollutants, as condensation nuclei. The effects of a polydisperse aerosol distribution, on the condensation/nucleation processes which cause the reduction in visibility are studied. This study demonstrates how computational fluid mechanics and heat transfer modeling can be applied to simulate the life cycle of the atmosphereic pollution problems.

Economic disadvantage and young children's emotional and behavioral problems: Mechanisms of risk

NARCIS (Netherlands)

J. Rijlaarsdam (Jolien); G. Stevens (Gonneke); J. van der Ende (Jan); A. Hofman (Albert); V.W.V. Jaddoe (Vincent); J.P. Mackenbach (Johan); F.C. Verhulst (Frank); H.W. Tiemeier (Henning)

2013-01-01

textabstractThis study aimed to establish potential mechanisms through which economic disadvantage contributes to the development of young children's internalizing and externalizing problems. Prospective data from fetal life to age 3 years were collected in a total of 2,169 families participating in

The problem of time quantum mechanics versus general relativity

CERN Document Server

Anderson, Edward

2017-01-01

This book is a treatise on time and on background independence in physics. It first considers how time is conceived of in each accepted paradigm of physics: Newtonian, special relativity, quantum mechanics (QM) and general relativity (GR). Substantial differences are moreover uncovered between what is meant by time in QM and in GR. These differences jointly source the Problem of Time: Nine interlinked facets which arise upon attempting concurrent treatment of the QM and GR paradigms, as is required in particular for a background independent theory of quantum gravity. A sizeable proportion of current quantum gravity programs - e.g. geometrodynamical and loop quantum gravity approaches to quantum GR, quantum cosmology, supergravity and M-theory - are background independent in this sense. This book's foundational topic is thus furthermore of practical relevance in the ongoing development of quantum gravity programs. This book shows moreover that eight of the nine facets of the Problem of Time already occur upon ...

Phase imaging of mechanical properties of live cells (Conference Presentation)

Science.gov (United States)

Wax, Adam

2017-02-01

The mechanisms by which cells respond to mechanical stimuli are essential for cell function yet not well understood. Many rheological tools have been developed to characterize cellular viscoelastic properties but these typically require direct mechanical contact, limiting their throughput. We have developed a new approach for characterizing the organization of subcellular structures using a label free, noncontact, single-shot phase imaging method that correlates to measured cellular mechanical stiffness. The new analysis approach measures refractive index variance and relates it to disorder strength. These measurements are compared to cellular stiffness, measured using the same imaging tool to visualize nanoscale responses to flow shear stimulus. The utility of the technique is shown by comparing shear stiffness and phase disorder strength across five cellular populations with varying mechanical properties. An inverse relationship between disorder strength and shear stiffness is shown, suggesting that cell mechanical properties can be assessed in a format amenable to high throughput studies using this novel, non-contact technique. Further studies will be presented which include examination of mechanical stiffness in early carcinogenic events and investigation of the role of specific cellular structural proteins in mechanotransduction.

Mechanically equivalent elastic-plastic deformations and the problem of plastic spin

Directory of Open Access Journals (Sweden)

Steigmann David J.

2011-01-01

Full Text Available The problem of plastic spin is phrased in terms of a notion of mechanical equivalence among local intermediate configurations of an elastic/ plastic crystalline solid. This idea is used to show that, without further qualification, the plastic spin may be suppressed at the constitutive level. However, the spin is closely tied to an underlying undistorted crystal lattice which, once specified, eliminates the freedom afforded by mechanical equivalence. As a practical matter a constitutive specification of plastic spin is therefore required. Suppression of plastic spin thus emerges as merely one such specification among many. Restrictions on these are derived in the case of rate-independent response.

Analysis and presentation of experimental results with examples, problems and programs

CERN Document Server

Christodoulides, Costas

2017-01-01

This book is intended as a guide to the analysis and presentation of experimental results. It develops various techniques for the numerical processing of experimental data, using basic statistical methods and the theory of errors. After presenting basic theoretical concepts, the book describes the methods by which the results can be presented, both numerically and graphically. The book is divided into three parts, of roughly equal length, addressing the theory, the analysis of data, and the presentation of results. Examples are given and problems are solved using the Excel, Origin, Python and R software packages. In addition, programs in all four languages are made available to readers, allowing them to use them in analyzing and presenting the results of their own experiments. Subjects are treated at a level appropriate for undergraduate students in the natural sciences, but this book should also appeal to anyone whose work involves dealing with experimental results.

Finite element program ARKAS: verification for IAEA benchmark problem analysis on core-wide mechanical analysis of LMFBR cores

International Nuclear Information System (INIS)

Nakagawa, M.; Tsuboi, Y.

1990-01-01

''ARKAS'' code verification, with the problems set in the International Working Group on Fast Reactors (IWGFR) Coordinated Research Programme (CRP) on the inter-comparison between liquid metal cooled fast breeder reactor (LMFBR) Core Mechanics Codes, is discussed. The CRP was co-ordinated by the IWGFR around problems set by Dr. R.G. Anderson (UKAEA) and arose from the IWGFR specialists' meeting on The Predictions and Experience of Core Distortion Behaviour (ref. 2). The problems for the verification (''code against code'') and validation (''code against experiment'') were set and calculated by eleven core mechanics codes from nine countries. All the problems have been completed and were solved with the core structural mechanics code ARKAS. Predictions by ARKAS agreed very well with other solutions for the well-defined verification problems. For the validation problems based on Japanese ex-reactor 2-D thermo-elastic experiments, the agreements between measured and calculated values were fairly good. This paper briefly describes the numerical model of the ARKAS code, and discusses some typical results. (author)

The three-body problem

International Nuclear Information System (INIS)

Musielak, Z E; Quarles, B

2014-01-01

The three-body problem, which describes three masses interacting through Newtonian gravity without any restrictions imposed on the initial positions and velocities of these masses, has attracted the attention of many scientists for more than 300 years. In this paper, we present a review of the three-body problem in the context of both historical and modern developments. We describe the general and restricted (circular and elliptic) three-body problems, different analytical and numerical methods of finding solutions, methods for performing stability analysis and searching for periodic orbits and resonances. We apply the results to some interesting problems of celestial mechanics. We also provide a brief presentation of the general and restricted relativistic three-body problems, and discuss their astronomical applications. (review article)

A geometrical multi-scale numerical method for coupled hygro-thermo-mechanical problems in photovoltaic laminates.

Science.gov (United States)

Lenarda, P; Paggi, M

A comprehensive computational framework based on the finite element method for the simulation of coupled hygro-thermo-mechanical problems in photovoltaic laminates is herein proposed. While the thermo-mechanical problem takes place in the three-dimensional space of the laminate, moisture diffusion occurs in a two-dimensional domain represented by the polymeric layers and by the vertical channel cracks in the solar cells. Therefore, a geometrical multi-scale solution strategy is pursued by solving the partial differential equations governing heat transfer and thermo-elasticity in the three-dimensional space, and the partial differential equation for moisture diffusion in the two dimensional domains. By exploiting a staggered scheme, the thermo-mechanical problem is solved first via a fully implicit solution scheme in space and time, with a specific treatment of the polymeric layers as zero-thickness interfaces whose constitutive response is governed by a novel thermo-visco-elastic cohesive zone model based on fractional calculus. Temperature and relative displacements along the domains where moisture diffusion takes place are then projected to the finite element model of diffusion, coupled with the thermo-mechanical problem by the temperature and crack opening dependent diffusion coefficient. The application of the proposed method to photovoltaic modules pinpoints two important physical aspects: (i) moisture diffusion in humidity freeze tests with a temperature dependent diffusivity is a much slower process than in the case of a constant diffusion coefficient; (ii) channel cracks through Silicon solar cells significantly enhance moisture diffusion and electric degradation, as confirmed by experimental tests.

Developmental transitions in presentations of externalizing problems among boys and girls at risk for child maltreatment.

Science.gov (United States)

Villodas, Miguel T; Litrownik, Alan J; Thompson, Richard; Jones, Deborah; Roesch, Scott C; Hussey, Jon M; Block, Stephanie; English, Diana J; Dubowitz, Howard

2015-02-01

The present study examined the impact of children's maltreatment experiences on the emergence of externalizing problem presentations among children during different developmental periods. The sample included 788 youth and their caregivers who participated in a multisite, prospective study of youth at-risk for maltreatment. Externalizing problems were assessed at ages 4, 8, and 12, and symptoms and diagnoses of attention-deficit/hyperactivity disorder, oppositional defiant disorder, and conduct disorder were assessed at age 14, during interviews with youth and caregivers. Information about maltreatment allegations was coded from official records. Latent transition analysis identified three groups of youth with similar presentations of externalizing problems ("well adjusted," "hyperactive/oppositional," and "aggressive/rule-breaking") and transitions between groups from ages 4, 8, and 12. A "defiant/deceitful" group also emerged at age 12. Girls were generally more likely to present as well adjusted than boys. Children with recent physical abuse allegations had an increased risk for aggressive/rule-breaking presentations during the preschool and preadolescent years, while children with sexual abuse or neglect allegations had lower probabilities of having well-adjusted presentations during middle childhood. These findings indicate that persistently severe aggressive conduct problems, which are related to the most concerning outcomes, can be identified early, particularly among neglected and physically and sexually abused children.

Conjugate problems in convective heat transfer

CERN Document Server

Dorfman, Abram S

2009-01-01

The conjugate heat transfer (CHT) problem takes into account the thermal interaction between a body and fluid flowing over or through it, a key consideration in both mechanical and aerospace engineering. Presenting more than 100 solutions of non-isothermal and CHT problems, this title considers the approximate solutions of CHT problems.

Economic Disadvantage and Young Children's Emotional and Behavioral Problems: Mechanisms of Risk

Science.gov (United States)

Rijlaarsdam, Jolien; Stevens, Gonneke W. J. M.; van der Ende, Jan; Hofman, Albert; Jaddoe, Vincent W. V.; Mackenbach, Johan P.; Verhulst, Frank C.; Tiemeier, Henning

2013-01-01

This study aimed to establish potential mechanisms through which economic disadvantage contributes to the development of young children's internalizing and externalizing problems. Prospective data from fetal life to age 3 years were collected in a total of 2,169 families participating in the Generation R Study. The observed physical home…

Capturing Students' Abstraction While Solving Organic Reaction Mechanism Problems across a Semester

Science.gov (United States)

Weinrich, M. L.; Sevian, H.

2017-01-01

Students often struggle with solving mechanism problems in organic chemistry courses. They frequently focus on surface features, have difficulty attributing meaning to symbols, and do not recognize tasks that are different from the exact tasks practiced. To be more successful, students need to be able to extract salient features, map similarities…

Psychological factors, sociodemographic characteristics, and coping mechanisms associated with the self-stigma of problem gambling

OpenAIRE

Hing, Nerilee; Russell, Alex M. T.

2017-01-01

Background and aims Few studies have examined the stigma of problem gambling and little is known about those who internalize this prejudice as damaging self-stigma. This paper aimed to identify psychological factors, sociodemographic characteristics, and coping mechanisms associated with the self-stigma of problem gambling. Methods An online survey was conducted on 177 Australian adults with a current gambling problem to measure self-stigma, self-esteem, social anxiety, self-consciousness, ps...

Present status and problems of remote systems technology in nuclear industry

Energy Technology Data Exchange (ETDEWEB)

1989-02-01

This reports the activities of Special Committee on Remote Systems Technology, Atomic Energy Society of Japan, during the period from Oct. 1984 to Sep. 1988. The Committee studied and reviewed the present status and problems of remote operation and maintenance in various fields of nuclear industry. Reported items are; reactor operation, reprocessing, nuclear fusion and decommissioning. It also reviews robotics and remote systems tehcnology applied to space and marine development.

Present status and problems of remote systems technology in nuclear industry

International Nuclear Information System (INIS)

1989-01-01

This reports the activities of Special Committee on Remote Systems Technology, Atomic Energy Society of Japan, during the period from Oct. 1984 to Sep. 1988. The Committee studied and reviewed the present status and problems of remote operation and maintenance in various fields of nuclear industry. Reported items are; reactor operation, reprocessing, nuclear fusion and decommissioning. It also reviews robotics and remote systems tehcnology applied to space and marine development. (author)

Intrinsic nonlinearity and method of disturbed observations in inverse problems of celestial mechanics

Science.gov (United States)

Avdyushev, Victor A.

2017-12-01

Orbit determination from a small sample of observations over a very short observed orbital arc is a strongly nonlinear inverse problem. In such problems an evaluation of orbital uncertainty due to random observation errors is greatly complicated, since linear estimations conventionally used are no longer acceptable for describing the uncertainty even as a rough approximation. Nevertheless, if an inverse problem is weakly intrinsically nonlinear, then one can resort to the so-called method of disturbed observations (aka observational Monte Carlo). Previously, we showed that the weaker the intrinsic nonlinearity, the more efficient the method, i.e. the more accurate it enables one to simulate stochastically the orbital uncertainty, while it is strictly exact only when the problem is intrinsically linear. However, as we ascertained experimentally, its efficiency was found to be higher than that of other stochastic methods widely applied in practice. In the present paper we investigate the intrinsic nonlinearity in complicated inverse problems of Celestial Mechanics when orbits are determined from little informative samples of observations, which typically occurs for recently discovered asteroids. To inquire into the question, we introduce an index of intrinsic nonlinearity. In asteroid problems it evinces that the intrinsic nonlinearity can be strong enough to affect appreciably probabilistic estimates, especially at the very short observed orbital arcs that the asteroids travel on for about a hundredth of their orbital periods and less. As it is known from regression analysis, the source of intrinsic nonlinearity is the nonflatness of the estimation subspace specified by a dynamical model in the observation space. Our numerical results indicate that when determining asteroid orbits it is actually very slight. However, in the parametric space the effect of intrinsic nonlinearity is exaggerated mainly by the ill-conditioning of the inverse problem. Even so, as for the

Quenching rate for a nonlocal problem arising in the micro-electro mechanical system

Science.gov (United States)

Guo, Jong-Shenq; Hu, Bei

2018-03-01

In this paper, we study the quenching rate of the solution for a nonlocal parabolic problem which arises in the study of the micro-electro mechanical system. This question is equivalent to the stabilization of the solution to the transformed problem in self-similar variables. First, some a priori estimates are provided. In order to construct a Lyapunov function, due to the lack of time monotonicity property, we then derive some very useful and challenging estimates by a delicate analysis. Finally, with this Lyapunov function, we prove that the quenching rate is self-similar which is the same as the problem without the nonlocal term, except the constant limit depends on the solution itself.

Engineering mechanics

CERN Document Server

Gross, Dietmar; Schröder, Jörg; Wall, Wolfgang A; Rajapakse, Nimal

Statics is the first volume of a three-volume textbook on Engineering Mechanics. The authors, using a time-honoured straightforward and flexible approach, present the basic concepts and principles of mechanics in the clearest and simplest form possible to advanced undergraduate engineering students of various disciplines and different educational backgrounds. An important objective of this book is to develop problem solving skills in a systematic manner. Another aim of this volume is to provide engineering students as well as practising engineers with a solid foundation to help them bridge the gap between undergraduate studies on the one hand and advanced courses on mechanics and/or practical engineering problems on the other. The book contains numerous examples, along with their complete solutions. Emphasis is placed upon student participation in problem solving. The contents of the book correspond to the topics normally covered in courses on basic engineering mechanics at universities and colleges. Now in i...

The Elder Problem

Directory of Open Access Journals (Sweden)

John W. Elder

2017-03-01

Full Text Available This paper presents an autobiographical and biographical historical account of the genesis, evolution and resolution of the Elder Problem. It begins with John W. Elder and his autobiographical story leading to his groundbreaking work on natural convection at Cambridge in the 1960’s. His seminal work published in the Journal of Fluid Mechanics in 1967 became the basis for the modern benchmark of variable density flow simulators that we know today as “The Elder Problem”. There have been well known and major challenges with the Elder Problem model benchmark—notably the multiple solutions that were ultimately uncovered using different numerical models. Most recently, it has been shown that the multiple solutions are indeed physically realistic bifurcation solutions to the Elder Problem and not numerically spurious artefacts. The quandary of the Elder Problem has now been solved—a major scientific breakthrough for fluid mechanics and for numerical modelling. This paper—records, reflections, reminiscences, stories and anecdotes—is an historical autobiographical and biographical memoir. It is the personal story of the Elder Problem told by some of the key scientists who established and solved the Elder Problem. 2017 marks the 50 year anniversary of the classical work by John W. Elder published in Journal of Fluid Mechanics in 1967. This set the stage for this scientific story over some five decades. This paper is a celebration and commemoration of the life and times of John W. Elder, the problem named in his honour, and some of the key scientists who worked on, and ultimately solved, it.

General presentation of the core mechanical behaviour approach in France

International Nuclear Information System (INIS)

Bernard, A.; Dorsselaere, J.P. van

1984-01-01

This French review paper presents the evolution along time of the FBR core mechanical behaviour approach, from RAPSODIE to SPX2, through PHENIX and SPX1: core designs, knowledge of the irradiation laws, project criterias, calculation codes, and R and D fields. (author)

Continuum damage mechanics: Present state and future trends

International Nuclear Information System (INIS)

Chaboche, J.L.

1987-01-01

Continuum Damage Mechanics (CDM) has developed since the initial works of Kachanov and Rabotnov. The paper gives a review of its main features, of the present possibilities and of further developments. Several aspects are considered successively: damage definitions and measures, damage growth equations and anisotropy effects, and use of CDM for local approaches of fracture. Various materials, loading conditions and damaging processes are incorporated in the same general framework. Particular attention is given to the possible connections between different definitions of damage, especially between the CDM definition and the information obtained from material science. (orig.)

Portfolio optimization problem with nonidentical variances of asset returns using statistical mechanical informatics

Science.gov (United States)

Shinzato, Takashi

2016-12-01

The portfolio optimization problem in which the variances of the return rates of assets are not identical is analyzed in this paper using the methodology of statistical mechanical informatics, specifically, replica analysis. We defined two characteristic quantities of an optimal portfolio, namely, minimal investment risk and investment concentration, in order to solve the portfolio optimization problem and analytically determined their asymptotical behaviors using replica analysis. Numerical experiments were also performed, and a comparison between the results of our simulation and those obtained via replica analysis validated our proposed method.

Pre-service teachers’ challenges in presenting mathematical problems

Science.gov (United States)

Desfitri, R.

2018-01-01

The purpose of this study was to analyzed how pre-service teachers prepare and assigned tasks or assignments in teaching practice situations. This study was also intended to discuss about kind of tasks or assignments they gave to students. Participants of this study were 15 selected pre-service mathematics teachers from mathematics education department who took part on microteaching class as part of teaching preparation program. Based on data obtained, it was occasionally found that there were hidden errors on questions or tasks assigned by pre-service teachers which might lead their students not to be able to reach a logical or correct answer. Although some answers might seem to be true, they were illogical or unfavourable. It is strongly recommended that pre-service teachers be more careful when posing mathematical problems so that students do not misunderstand the problems or the concepts, since both teachers and students were sometimes unaware of errors in problems being worked on.

Present status of the radiative neutron capture mechanisms -nonstatistical effects

International Nuclear Information System (INIS)

Brzosko, J.S.

1976-01-01

The present status of our knowledge about neutron radiative capture mechanisms is described. In the first section there are given a review on mathematical description of the neutron capture cross section and possible sources of correlation effects. The point of lecture is the explanation of connections between the intermediate structures and correlation effects. In one of the sections the explanation of the bump in γ-ray spectra is discussed. The typical experimental results are presented. (author)

Linear differential equations to solve nonlinear mechanical problems: A novel approach

OpenAIRE

Nair, C. Radhakrishnan

2004-01-01

Often a non-linear mechanical problem is formulated as a non-linear differential equation. A new method is introduced to find out new solutions of non-linear differential equations if one of the solutions of a given non-linear differential equation is known. Using the known solution of the non-linear differential equation, linear differential equations are set up. The solutions of these linear differential equations are found using standard techniques. Then the solutions of the linear differe...

Variational problems arising in classical mechanics and nonlinear elasticity

International Nuclear Information System (INIS)

Spencer, P.

1999-01-01

In this thesis we consider two different classes of variational problems. First, one-dimensional problems arising from classical mechanics where the problem is to determine whether there is a unique function η 0 (x) which minimises the energy functional of the form I(η) = ∫ a b L(x,η(x), η'(x)) dx. We will investigate uniqueness by making a change of dependent and independent variables and showing that for a class of integrands L with a particular kind of scaling invariance the resulting integrand is completely convex. The change of variables arises by applying results from Lie group theory as applied in the study of differential equations and this work is motivated by [60] and [68]. Second, the problem of minimising energy functionals of the form E(u) = ∫ A W(∇u(x)) dx in the case of a nonlinear elastic body occupying an annular region A contains R 2 with u : A-bar → A-bar. This work is motivated by [57] (in particular the example of paragraph 4). We will consider rotationally symmetric deformations satisfying prescribed boundary conditions. We will show the existence of minimisers for stored energy functions of the form W(F) = g-tilde(vertical bar-F-vertical bar, det(F)) in a class of general rotationally symmetric deformations of a compressible annulus and for stored energy functions of the form W(F) = g-bar(vertical bar-F-vertical bar) in a class of rotationally symmetric deformations of an incompressible annulus. We will also show that in each case the minimisers are solutions of the full equilibrium equations. A model problem will be considered where the energy functional is the Dirichlet integral and it will be shown that the rotationally symmetric solution obtained is a minimiser among admissible non-rotationally symmetric deformations. In the case of an incompressible annulus, we will consider the Dirichlet integral as the energy functional and show that the rotationally symmetric equilibrium solutions in this case are weak local minimisers in

Few-body problem in celestial mechanics

Energy Technology Data Exchange (ETDEWEB)

Dermott, S F [Cornell Univ., Ithaca, NY (USA). Center for Radiophysics and Space Research

1984-03-26

The approaches taken by solar system dynamicists to various outstanding problems has changed considerably in recent years. Some problems for which few-body approaches have been tried in the past are now thought to involve collective phenomena. Observed features in Saturn's rings associated with resonances are examples. On the other hand, the problem of the origin of the Kirkwood gaps in the asteroid belt, for which a number of a many-body approaches (involving collisions or gas friction) have been tried, probably has a few-body solution and may involve chaos.

Corrosion problems of materials for mechanical, power and chemical engineering

International Nuclear Information System (INIS)

Bouska, P.; Cihal, V.; Malik, K.; Vyklicky, M.; Stefec, R.

1988-01-01

The proceedings contain 47 contributions, out of which 8 have been inputted in INIS. These are concerned with various corrosion problems of WWER primary circuit components and their testing. The factors affecting the corrosion resistance are analyzed, the simultaneous corrosion action of decontamination of steels is assessed, and the corrosion cracking of special steels is dealt with. The effects of deformation on the corrosion characteristics are examined for steel to be used in fast reactors. The corrosion potentials were measured for various steels. A testing facility for corrosion-mechanical tests is briefly described. (M.D.). 5 figs., 5 tabs., 25 refs

The present problems of hygienic supervising of workplaces with ionizing radiation sources

International Nuclear Information System (INIS)

Husar, J.

1995-01-01

This paper deals with the problems of hygienic supervising of workplaces with ionizing radiation sources in Bratislava. Most problems consist in present economic transformation of State Corporations. Abolishing of previous State Corporations and arising of new organizations means new field of their activities. It often happens, that previously used ionizing radiation sources, X-ray tubes, or radioactive sources, are not longer to use and it is necessary to remove corresponding workplaces.The big State Corporation with series of subsidiaries in whole Slovakia was divided to many new smaller Joint-stock Corporations. A subsidiary possessed workplace with X-ray tube and sealed radioactive source of medium radioactivity. During a routine hygienic inspection was found, that the original establishment was abolished, all personal dismissed and another organization is going to move at this place. New organization personnel has not known,that the previous workplace was such one with radiation sources. The situation was complicated by the fact, that new management had no connection to previous personnel and had not sufficient information about abolished establishment. The problem of supervising workplaces with ionizing radiation sources is described. (J.K.)

The present problems of hygienic supervising of workplaces with ionizing radiation sources

Energy Technology Data Exchange (ETDEWEB)

Husar, J [State Health Institute of Slovak Republic, Bratislava (Czech Republic)

1996-12-31

This paper deals with the problems of hygienic supervising of workplaces with ionizing radiation sources in Bratislava. Most problems consist in present economic transformation of State Corporations. Abolishing of previous State Corporations and arising of new organizations means new field of their activities. It often happens, that previously used ionizing radiation sources, X-ray tubes, or radioactive sources, are not longer to use and it is necessary to remove corresponding workplaces.The big State Corporation with series of subsidiaries in whole Slovakia was divided to many new smaller Joint-stock Corporations. A subsidiary possessed workplace with X-ray tube and sealed radioactive source of medium radioactivity. During a routine hygienic inspection was found, that the original establishment was abolished, all personal dismissed and another organization is going to move at this place. New organization personnel has not known,that the previous workplace was such one with radiation sources. The situation was complicated by the fact, that new management had no connection to previous personnel and had not sufficient information about abolished establishment. The problem of supervising workplaces with ionizing radiation sources is described. (J.K.).

Asymmetrically Dominated Choice Problems, the Isolation Hypothesis and Random Incentive Mechanisms

OpenAIRE

Cox, James C.; Sadiraj, Vjollca; Schmidt, Ulrich

2014-01-01

This paper presents an experimental study of the random incentive mechanisms which are a standard procedure in economic and psychological experiments. Random incentive mechanisms have several advantages but are incentive-compatible only if responses to the single tasks are independent. This is true if either the independence axiom of expected utility theory or the isolation hypothesis of prospect theory holds. We present a simple test of this in the context of choice under risk. In the baseli...

The mechanism of lightning attraction and the problem of lightning initiation by lasers

International Nuclear Information System (INIS)

Bazelyan, E M; Raizer, Yurii P

2000-01-01

Physical processes determining the ability of lightning to change its trajectory by choosing high constructions to strike are discussed. The leader mechanism of lightning propagation is explained. The criterion for a viable ascending (upward) leader to originate from a construction is established. The mechanism of the weak long-distance interaction between the ascending counter leader originating from a grounded construction and the descending (downward) leader from a cloud is analyzed. Current problems concerning lightning protection and lightning triggering by a laser spark are discussed, the latter being of special interest owing to a recent successful experiment along this line. (physics of our days)

Fracture mechanics

CERN Document Server

Perez, Nestor

2017-01-01

The second edition of this textbook includes a refined presentation of concepts in each chapter, additional examples; new problems and sections, such as conformal mapping and mechanical behavior of wood; while retaining all the features of the original book. The material included in this book is based upon the development of analytical and numerical procedures pertinent to particular fields of linear elastic fracture mechanics (LEFM) and plastic fracture mechanics (PFM), including mixed-mode-loading interaction. The mathematical approach undertaken herein is coupled with a brief review of several fracture theories available in cited references, along with many color images and figures. Dynamic fracture mechanics is included through the field of fatigue and Charpy impact testing. Explains computational and engineering approaches for solving crack-related problems using straightforward mathematics that facilitate comprehension of the physical meaning of crack growth processes; Expands computational understandin...

Enriching Elementary Quantum Mechanics with the Computer: Self-Consistent Field Problems in One Dimension

Science.gov (United States)

Bolemon, Jay S.; Etzold, David J.

1974-01-01

Discusses the use of a small computer to solve self-consistent field problems of one-dimensional systems of two or more interacting particles in an elementary quantum mechanics course. Indicates that the calculation can serve as a useful introduction to the iterative technique. (CC)

Cytogenetical effects of low doses: results obtained by N.N.Luchik and present-day problems

International Nuclear Information System (INIS)

Geras'kin, S.A.; Sevan'kaev, A.V.

1996-01-01

The analysis of present status of the problem of quantitative assessment of cytogenetic effects low is presented. The importance of works of N.V. Luchik is demonstrated for the development of this field of radiobiology. The results of the author's own experimental and theoretical research on the regularities of induction of cytogenetical damage by low doses of ionising radiation are presented

Discontinuous Petrov–Galerkin method with optimal test functions for thin-body problems in solid mechanics

KAUST Repository

Niemi, Antti H.; Bramwell, Jamie A.; Demkowicz, Leszek F.

2011-01-01

We study the applicability of the discontinuous Petrov-Galerkin (DPG) variational framework for thin-body problems in structural mechanics. Our numerical approach is based on discontinuous piecewise polynomial finite element spaces for the trial

Dynamical systems in classical mechanics

CERN Document Server

Kozlov, V V

1995-01-01

This book shows that the phenomenon of integrability is related not only to Hamiltonian systems, but also to a wider variety of systems having invariant measures that often arise in nonholonomic mechanics. Each paper presents unique ideas and original approaches to various mathematical problems related to integrability, stability, and chaos in classical dynamics. Topics include… the inverse Lyapunov theorem on stability of equilibria geometrical aspects of Hamiltonian mechanics from a hydrodynamic perspective current unsolved problems in the dynamical systems approach to classical mechanics

Mechanics for materials and technologies

CERN Document Server

Goldstein, Robert; Murashkin, Evgenii

2017-01-01

This book shows impressively how complex mathematical modeling of materials can be applied to technological problems. Top-class researchers present the theoretical approaches in modern mechanics and apply them to real-world problems in solid mechanics, creep, plasticity, fracture, impact, and friction. They show how they can be applied to technological challenges in various fields like aerospace technology, biological sciences and modern engineering materials.

Nucleon many-body problem using quantum-mechanical few-body technique

International Nuclear Information System (INIS)

Horiuchi, Wataru

2016-01-01

A nucleus is treated as a quantum-mechanical many-body system consisting of protons and neutrons that interact with each other by nuclear force. This paper explains the variational calculation using the correlated basis function as a powerful technique for obtaining the precise solution of Schroedinger equation of many-body, and tries to understand the nucleon many-body system from the viewpoint of a few-body through the application cases of various nuclear systems. It describes the important correlation that characterizes the nucleon many-body system such as the mean field, cluster, and tensor of bound state, and shows that non-bound state is also describable. Since such precise theory is mantic, it is essential for explaining the nature of unknown unstable nuclei, and for determining the nuclear reaction rate under the environment of the stars difficult for experiment. The method is general and flexible, and can be applied to various quantum-mechanical many-body problems. For example, the multi-body calculation of atoms and molecules, hypernuclei, and hadron spectroscopy can be carried out only by changing the potential and particles. (A.O.)

Exploring the Connection Between Sampling Problems in Bayesian Inference and Statistical Mechanics

Science.gov (United States)

Pohorille, Andrew

2006-01-01

The Bayesian and statistical mechanical communities often share the same objective in their work - estimating and integrating probability distribution functions (pdfs) describing stochastic systems, models or processes. Frequently, these pdfs are complex functions of random variables exhibiting multiple, well separated local minima. Conventional strategies for sampling such pdfs are inefficient, sometimes leading to an apparent non-ergodic behavior. Several recently developed techniques for handling this problem have been successfully applied in statistical mechanics. In the multicanonical and Wang-Landau Monte Carlo (MC) methods, the correct pdfs are recovered from uniform sampling of the parameter space by iteratively establishing proper weighting factors connecting these distributions. Trivial generalizations allow for sampling from any chosen pdf. The closely related transition matrix method relies on estimating transition probabilities between different states. All these methods proved to generate estimates of pdfs with high statistical accuracy. In another MC technique, parallel tempering, several random walks, each corresponding to a different value of a parameter (e.g. "temperature"), are generated and occasionally exchanged using the Metropolis criterion. This method can be considered as a statistically correct version of simulated annealing. An alternative approach is to represent the set of independent variables as a Hamiltonian system. Considerab!e progress has been made in understanding how to ensure that the system obeys the equipartition theorem or, equivalently, that coupling between the variables is correctly described. Then a host of techniques developed for dynamical systems can be used. Among them, probably the most powerful is the Adaptive Biasing Force method, in which thermodynamic integration and biased sampling are combined to yield very efficient estimates of pdfs. The third class of methods deals with transitions between states described

Statistical-mechanics analysis of Gaussian labeled-unlabeled classification problems

International Nuclear Information System (INIS)

Tanaka, Toshiyuki

2013-01-01

The labeled-unlabeled classification problem in semi-supervised learning is studied via statistical-mechanics approach. We analytically investigate performance of a learner with an equal-weight mixture of two symmetrically-located Gaussians, performing posterior mean estimation of the parameter vector on the basis of a dataset consisting of labeled and unlabeled data generated from the same probability model as that assumed by the learner. Under the assumption of replica symmetry, we have analytically obtained a set of saddle-point equations, which allows us to numerically evaluate performance of the learner. On the basis of the analytical result we have observed interesting phenomena, in particular the coexistence of good and bad solutions, which may happen when the number of unlabeled data is relatively large compared with that of labeled data

Finite elements methods in mechanics

CERN Document Server

Eslami, M Reza

2014-01-01

This book covers all basic areas of mechanical engineering, such as fluid mechanics, heat conduction, beams, and elasticity with detailed derivations for the mass, stiffness, and force matrices. It is especially designed to give physical feeling to the reader for finite element approximation by the introduction of finite elements to the elevation of elastic membrane. A detailed treatment of computer methods with numerical examples are provided. In the fluid mechanics chapter, the conventional and vorticity transport formulations for viscous incompressible fluid flow with discussion on the method of solution are presented. The variational and Galerkin formulations of the heat conduction, beams, and elasticity problems are also discussed in detail. Three computer codes are provided to solve the elastic membrane problem. One of them solves the Poisson’s equation. The second computer program handles the two dimensional elasticity problems, and the third one presents the three dimensional transient heat conducti...

Two cases of rickets presenting with poor growth, hypotonia, and respiratory problems.

Science.gov (United States)

Wouters, E; Wojciechowski, M; de Vries, E

2015-06-01

Rickets is a rare disease in developed countries. In children, it is a disease which affects growing bone. Depending on the severity, it can present with a wide variety of symptoms. Because it is such a rare disease in developed countries, symptoms suggesting rickets are often not easily recognized. This can cause a delay in diagnosing and treating rickets. Often unnecessary and sometimes invasive investigations are performed. First leading clues to rickets on physical examination are poor growth, especially length, thickening of wrists, bow legs, and craniotabes. At further examination, special attention should be paid to osteopenia and cupping and fraying at the metaphyses on X-rays. Laboratory results suggestive for rickets are elevated alkaline phosphatase and disturbances in calcium and phosphate homeostasis. In this report, we present two cases presenting with poor growth, severe pain, and respiratory problems secondary to calcipenic rickets.

On the problem of measurement in quantum mechanics

International Nuclear Information System (INIS)

He Zuoxiu

1993-01-01

Some new developments in the theory of measurement in quantum mechanics are presented. The theory of measurement given by Von Neumann is shown to be incorrect, since the process of measurement is one of increasing entropy and cannot be derived within the scope of Schroedinger's equation. The new theory developed by Daneri, Loinger and Prosperi can avoid the difficulties previously encountered and, furthermore, can explain the EPR paradox

Continuum Mechanics

CERN Document Server

Romano, Antonio

2010-01-01

This book offers a broad overview of the potential of continuum mechanics to describe a wide range of macroscopic phenomena in real-world problems. Building on the fundamentals presented in the authors' previous book, Continuum Mechanics using Mathematica(R), this new work explores interesting models of continuum mechanics, with an emphasis on exploring the flexibility of their applications in a wide variety of fields.Specific topics, which have been chosen to show the power of continuum mechanics to characterize the experimental behavior of real phenomena, include: * various aspects of nonlin

The vexing problem of thrombosis in long-term mechanical circulatory support.

Science.gov (United States)

Mehra, Mandeep R; Stewart, Garrick C; Uber, Patricia A

2014-01-01

Durable left ventricular assist devices (LVADs) have not only enhanced longevity but also conferred sustained improvements in quality of life, symptom control, and functional capacity in patients with medically refractory advanced heart failure. Problems with device-related infection, bleeding, neurologic events, right-sided heart failure, and device malfunction have dominated the clinical care of patients living on mechanical support. Even as adoption of durable LVADs accelerated globally, we began to encounter a growing dilemma of pump malfunction caused by thrombosis. In early 2011, clinicians began to notice a spike in the incidence of pump thrombosis with the HeartMate II (Thoratec Corp, Pleasanton, CA) LVAD. By 2012, the problem of thrombosis in LVADs began to consume most of the scientific direction as centers and collaborative groups began to dissect this nascent phenomenon. In this perspective, we describe the magnitude and implications of pump thrombosis, discuss secular and management trends in this unique population, attempt to dissect the problem at its root, offer guidance on surveillance and therapeutic principles, and outline issues that deserve our immediate and collaborative attention. © 2014 International Society for Heart and Lung Transplantation Published by International Society for the Heart and Lung Transplantation All rights reserved.

Overview on collision processes of highly charged ions with atoms present status and problems

International Nuclear Information System (INIS)

Janev, R.K.

1983-05-01

This paper provides a brief discussion on the present status of the collision physics of highly charged ions with atoms. The emphasis is on the main achievements in understanding and describing the most important collision processes, and as charge transfer, ionization and Auger-type processes, and even more on those open problems which, due either to their scientific or practical importance, represent challenges to current research in this field. The paper concentrates on general ideas and problems whose development and solutions have advanced or will advance our basic understanding of the collision dynamics of multiply charged ions with atoms

Organic radiation chemistry--the present state and problems

International Nuclear Information System (INIS)

Sareava, V.V.; Kalyazin, E.P.

1985-01-01

The authors pose the principal problems to be solved in organic radiation chemistry: 1) to derive from the structural formula of a given organic compound the composition of the products from its radiolysis under standard conditions; 2) to use a number of physicochemical properties of a given compound at the molecular and material levels to predict the variation in composition and fraction of products from the radiolysis of the compounds with a change in irradiation conditions, i.e., the parameters of the acting radiation and the state of the substance, to indicate the direction of the principal radiation chemical processes in complex mixtures of natural or technical origin. Having stated the problems, the authors attempt to show the level of understanding of the radiolysis of organic compounds, using aliphatic hydrocarbons as principal discussion subjects

Random number generators and the Metropolis algorithm: application to various problems in physics and mechanics as an introduction to computational physics

International Nuclear Information System (INIS)

Calvayrac, Florent

2005-01-01

We present known and new applications of pseudo random numbers and of the Metropolis algorithm to phenomena of physical and mechanical interest, such as the search of simple clusters isomers with interactive visualization, or vehicle motion planning. The progression towards complicated problems was used with first-year graduate students who wrote most of the programs presented here. We argue that the use of pseudo random numbers in simulation and extrema research programs in teaching numerical methods in physics allows one to get quick programs and physically meaningful and demonstrative results without recurring to the advanced numerical analysis methods

Demonstrativeness of using energy rather than mass as the unit of measure for a number of problems in physics, mechanics, and geophysics

International Nuclear Information System (INIS)

Golitsyn, G S

2008-01-01

Changing from the mass - length - time to the energy - length - time system of units is suggested as a means by which a number of problems in physics, mechanics, and geophysics can be more easily and conveniently solved using similarity analysis and dimensional methods. Eight examples are presented, with the derivations of the Stefan - Boltzmann radiation law, total kinetic energy of a hurricane, cosmic ray energy spectrum, etc. (methodological notes)

INTERCONNECTING NETWORKS WITH DIFFERENT LEVELS OF SECURITY – A PRESENT NATO PROBLEM

Directory of Open Access Journals (Sweden)

LIVIU TATOMIR

2016-07-01

Full Text Available A situation often met in the Romanian Armed Forces in recent years is the need for interconnecting two networks (domains with different levels of classification. Considering that the Romanian armed troops are involved in numerous missions with NATO partners, solutions, already implemented across the organization, are considered to be applied in domestic systems, also. This paper presents the solutions adopted by NATO in order to solve the problem of cross -domains interconnections. We present the maturity level reached by these solutions and the possibility of implementing these solutions in the Romanian Armed Forces, with or without specific adaptation to our own rules and regulations. The goal is to use a NATO already proved solution to our national classified networks.

Topics in three body problems

International Nuclear Information System (INIS)

Amado, R.D.

1975-01-01

An overview of the formal theory of the three-body problem as it has developed in the past twelve years is given. The formal structure of the theory, some of the techniques that have developed for handling the theory, and some results on how general quantum mechanical principles structure the results, are presented. The discussion is held entirely in the context of non-relativistic quantum mechanics with short-range forces. In this presentation the main outline of the theory is stressed, often at the expense of mathematical rigour [pt

Extended quantum mechanics

International Nuclear Information System (INIS)

Pavel Bona

2000-01-01

The work can be considered as an essay on mathematical and conceptual structure of nonrelativistic quantum mechanics which is related here to some other (more general, but also to more special and 'approximative') theories. Quantum mechanics is here primarily reformulated in an equivalent form of a Poisson system on the phase space consisting of density matrices, where the 'observables', as well as 'symmetry generators' are represented by a specific type of real valued (densely defined) functions, namely the usual quantum expectations of corresponding selfjoint operators. It is shown in this paper that inclusion of additional ('nonlinear') symmetry generators (i. e. 'Hamiltonians') into this reformulation of (linear) quantum mechanics leads to a considerable extension of the theory: two kinds of quantum 'mixed states' should be distinguished, and operator - valued functions of density matrices should be used in the role of 'nonlinear observables'. A general framework for physical theories is obtained in this way: By different choices of the sets of 'nonlinear observables' we obtain, as special cases, e.g. classical mechanics on homogeneous spaces of kinematical symmetry groups, standard (linear) quantum mechanics, or nonlinear extensions of quantum mechanics; also various 'quasiclassical approximations' to quantum mechanics are all sub theories of the presented extension of quantum mechanics - a version of the extended quantum mechanics. A general interpretation scheme of extended quantum mechanics extending the usual statistical interpretation of quantum mechanics is also proposed. Eventually, extended quantum mechanics is shown to be (included into) a C * -algebraic (hence linear) quantum theory. Mathematical formulation of these theories is presented. The presentation includes an analysis of problems connected with differentiation on infinite-dimensional manifolds, as well as a solution of some problems connected with the work with only densely defined unbounded

Presentation on mechanisms and applications of chalcopyrite and pyrite bioleaching in biohydrometallurgy - a presentation.

Science.gov (United States)

Tao, Huang; Dongwei, Li

2014-12-01

This review outlines classic and current research, scientific documents and research achievements in bioleaching, particularly in respect of the bioleaching of chalcopyrite and pyrite. The diversity and commonality of the microbial leaching process can be easily studied through comparing the bioleaching mechanism and the application of these two metal sulfides. The crystal, electronic and surface structures of chalcopyrite and pyrite are summarized in detail in this paper. It determines the specific and complicated interaction pathways, kinetics of the atmospheric/aqueous oxidation, and the control process of bioleaching of the minerals as the precondition. Bioleaching of metal sulfides is performed by a diverse group of microorganisms and microbial communities. The species of the bacteria which have a significant effect on leaching ores are miraculously diverse. The newly identified acidophilic microorganisms with unique characteristics for efficient bioleaching of sulfidic minerals are increasing sharply. The cell-to-cell communication mechanisms, which are still implicit, elusive and intangible at present day, have gradually become a research hotspot. The different mineralogy characteristics and the acid solubility of the metal sulfides (e.g., chalcopyrite and pyrite) cause two different dissolution pathways, the thiosulfate and the polysulfide pathways. The bioleaching mechanisms are categorized by contact (an electrostatic attachment) and noncontact (planktonic) process, with emphasis on the produce of extracellular polymeric substances and formation of biofilm on the surface of the metal sulfides in this paper. The division of the direct and indirect effect are not adopted due to the redox chain, the reduction of the ferric iron and oxidation of the ferrous iron. The molecular oxygen is reduced by the electrons extracted from the specific metal sulfide, via a redox chain forming a supercomplex spanning the periplasmic space and connecting both outer and inner

Mechanical problem-solving strategies in left-brain damaged patients and apraxia of tool use.

Science.gov (United States)

Osiurak, François; Jarry, Christophe; Lesourd, Mathieu; Baumard, Josselin; Le Gall, Didier

2013-08-01

Left brain damage (LBD) can impair the ability to use familiar tools (apraxia of tool use) as well as novel tools to solve mechanical problems. Thus far, the emphasis has been placed on quantitative analyses of patients' performance. Nevertheless, the question still to be answered is, what are the strategies employed by those patients when confronted with tool use situations? To answer it, we asked 16 LBD patients and 43 healthy controls to solve mechanical problems by means of several potential tools. To specify the strategies, we recorded the time spent in performing four kinds of action (no manipulation, tool manipulation, box manipulation, and tool-box manipulation) as well as the number of relevant and irrelevant tools grasped. We compared LBD patients' performance with that of controls who encountered difficulties with the task (controls-) or not (controls+). Our results indicated that LBD patients grasped a higher number of irrelevant tools than controls+ and controls-. Concerning time allocation, controls+ and controls- spent significantly more time in performing tool-box manipulation than LBD patients. These results are inconsistent with the possibility that LBD patients could engage in trial-and-error strategies and, rather, suggest that they tend to be perplexed. These findings seem to indicate that the inability to reason about the objects' physical properties might prevent LBD patients from following any problem-solving strategy. Copyright © 2013 Elsevier Ltd. All rights reserved.

Study on the mechanism and efficiency of simulated annealing using an LP optimization benchmark problem - 113

International Nuclear Information System (INIS)

Qianqian, Li; Xiaofeng, Jiang; Shaohong, Zhang

2010-01-01

Simulated Annealing Algorithm (SAA) for solving combinatorial optimization problems is a popular method for loading pattern optimization. The main purpose of this paper is to understand the underlying search mechanism of SAA and to study its efficiency. In this study, a general SAA that employs random pair exchange of fuel assemblies to search for the optimum fuel Loading Pattern (LP) is applied to an exhaustively searched LP optimization benchmark problem. All the possible LPs of the benchmark problem have been enumerated and evaluated via the use of the very fast and accurate Hybrid Harmonics and Linear Perturbation (HHLP) method, such that the mechanism of SA for LP optimization can be explicitly analyzed and its search efficiency evaluated. The generic core geometry itself dictates that only a small number LPs can be generated by performing random single pair exchanges and that the LPs are necessarily mostly similar to the initial LP. This phase space effect turns out to be the basic mechanism in SAA that can explain its efficiency and good local search ability. A measure of search efficiency is introduced which shows that the stochastic nature of SAA greatly influences the variability of its search efficiency. It is also found that using fuel assembly k-infinity distribution as a technique to filter the LPs can significantly enhance the SAA search efficiency. (authors)

Geometry of surfaces a practical guide for mechanical engineers

CERN Document Server

Radzevich, Stephen P

2012-01-01

Presents an in-depth analysis of geometry of part surfaces and provides the tools for solving complex engineering problems Geometry of Surfaces: A Practical Guide for Mechanical Engineers is a comprehensive guide to applied geometry of surfaces with focus on practical applications in various areas of mechanical engineering. The book is divided into three parts on Part Surfaces, Geometry of Contact of Part Surfaces and Mapping of the Contacting Part Surfaces. Geometry of Surfaces: A Practical Guide for Mechanical Engineers combines differential geometry and gearing theory and presents new developments in the elementary theory of enveloping surfaces. Written by a leading expert of the field, this book also provides the reader with the tools for solving complex engineering problems in the field of mechanical engineering. Presents an in-depth analysis of geometry of part surfaces Provides tools for solving complex engineering problems in the field of mechanical engineering Combines differential geometry an...

Present problems concerning pneumoconiosis in French collieries

Energy Technology Data Exchange (ETDEWEB)

Amoudru, C. (Charbonnages de France, 75 - Paris)

A report -876 cases in 1980, 46,899 annuities running and 22,330 entitled, 1400 MF for pensions and allowances for temporary incapacity- shows eloquently that pneumoconiosis remains the first problem in underground mines. A general table gives the distribution by age between the holders of annuities and, statistics show that the situations are extremely different from one coalfield to another. We are thus obliged to distinguish between coalfield with a natural handicap. Notes on the therapeutic aspects are given.

A two-dimensional finite element method for analysis of solid body contact problems in fuel rod mechanics

International Nuclear Information System (INIS)

Nissen, K.L.

1988-06-01

Two computer codes for the analysis of fuel rod behavior have been developed. Fuel rod mechanics is treated by a two-dimensional, axisymmetric finite element method. The program KONTAKT is used for detailed examinations on fuel rod sections, whereas the second program METHOD2D allows instationary calculations of whole fuel rods. The mechanical contact of fuel and cladding during heating of the fuel rod is very important for it's integrity. Both computer codes use a Newton-Raphson iteration for the solution of the nonlinear solid body contact problem. A constitutive equation is applied for the dependency of contact pressure on normal approach of the surfaces which are assumed to be rough. If friction is present on the contacting surfaces, Coulomb's friction law is used. Code validation is done by comparison with known analytical solutions for special problems. Results of the contact algorithm for an elastic ball pressing against a rigid surface are confronted with Hertzian theory. Influences of fuel-pellet geometry as well as influences of discretisation of displacements and stresses of a single fuel pellet are studied. Contact of fuel and cladding is calculated for a fuel rod section with two fuel pellets. The influence of friction forces between fuel and cladding on their axial expansion is demonstrated. By calculation of deformations and temperatures during an instationary fuel rod experiment of the CABRI-series the feasibility of two-dimensional finite element analysis of whole fuel rods is shown. (orig.) [de

Development of a problem solving evaluation instrument; untangling of specific problem solving assets

Science.gov (United States)

Adams, Wendy Kristine

The purpose of my research was to produce a problem solving evaluation tool for physics. To do this it was necessary to gain a thorough understanding of how students solve problems. Although physics educators highly value problem solving and have put extensive effort into understanding successful problem solving, there is currently no efficient way to evaluate problem solving skill. Attempts have been made in the past; however, knowledge of the principles required to solve the subject problem are so absolutely critical that they completely overshadow any other skills students may use when solving a problem. The work presented here is unique because the evaluation tool removes the requirement that the student already have a grasp of physics concepts. It is also unique because I picked a wide range of people and picked a wide range of tasks for evaluation. This is an important design feature that helps make things emerge more clearly. This dissertation includes an extensive literature review of problem solving in physics, math, education and cognitive science as well as descriptions of studies involving student use of interactive computer simulations, the design and validation of a beliefs about physics survey and finally the design of the problem solving evaluation tool. I have successfully developed and validated a problem solving evaluation tool that identifies 44 separate assets (skills) necessary for solving problems. Rigorous validation studies, including work with an independent interviewer, show these assets identified by this content-free evaluation tool are the same assets that students use to solve problems in mechanics and quantum mechanics. Understanding this set of component assets will help teachers and researchers address problem solving within the classroom.

Presenting a Multi-level Superstructure Optimization Approach for Mechatronic System Design

DEFF Research Database (Denmark)

Pedersen, Henrik C.; Andersen, Torben Ole; Bech, Michael Møller

2010-01-01

Synergism and integration in the design process is what sets apart a Mechatronic System from a traditional, multidisciplinary system. However the typical design approach has been to divide the design problem into sub problems for each technology area (mechanics, electronics and control) and descr......Synergism and integration in the design process is what sets apart a Mechatronic System from a traditional, multidisciplinary system. However the typical design approach has been to divide the design problem into sub problems for each technology area (mechanics, electronics and control......) and describe the interface between the technologies, whereas the lack of well-established, systematic engineering methods to form the basic set-off in analysis and design of complete mechatronic systems has been obvious. The focus of the current paper is therefore to present an integrated design approach...... for mechatronic system design, utilizing a multi-level superstructure optimization based approach. Finally two design examples are presented and the possibilities and limitations of the approach are outlined....

Present state and problems of mutation breeding

Energy Technology Data Exchange (ETDEWEB)

Balint, A. (Agrartudomanyi Egyetem, Goedoelloe (Hungary))

1983-09-01

The major achievements and problems of mutation breeding are discussed according to recent international references. Examples for the production of microorganism resistant tobacco, maize, cabbage, disease resistant sugar cane and some freeze resistant plants are listed. Special opportunities offered by mutation to increase photosynthesis and to improve yields are discussed. The significance of the new techniques to produce induced mutants by means of tissue cultures, to fix N/sub 2/ for leguminosae and to affect the activities of N/sub 2/ fixing microorganisms is emphasized.

The Problems of Realizing the Innovative Potential of Science and Mechanisms for their Solution

Directory of Open Access Journals (Sweden)

Ianchenko Zinayida B.

2017-06-01

Full Text Available The aim of the article is revealing reasons for the low payoff of science in terms of the effectiveness of the research activity and demand for its results in economic spheres, identifying problems in the innovation activity of research institutions and reasons for their arising, searching for fundamental approaches to the development of a strategy and mechanisms for realization of the innovative potential of science to strengthen its position in the real sector. The study used general scientific methods, including: systems approach — to systematize the problems of the innovation activity of research institutions; methods of theoretical generalization — to study the theoretical principles of the scientific and innovation activity; methods of analysis and synthesis — to search for fundamental approaches to the development of mechanisms for realization of the innovative potential of science. The used concepts of scientific activity and innovations are generalized. The author’s definition of the term “innovation” is proposed. The main reasons of the minor impact of science on the economy are systematized, the mechanisms for their elimination are offered. Based on the comprehensive analysis of the reasons for losing by science its impact on the economy, the ways of realizing the innovative potential of science are improved. The results of the research can be used in reforming domestic scientific research institutions.

The realism problem of quantum mechanics in view of the decoherence interpretation

International Nuclear Information System (INIS)

Messer, Joachim August

2007-01-01

Quantum mechanics in the conception, as it is today present, contains - what concerns its conceivable understanding and its interpretation - numerous paradoxa. The best known Copenhagen interpretation is critized and other interpretations, as the many-world interpretation and the modern, today mostly attended decoherence interpretation are put to this describingly on side. Axiomatic explanation attempts, like those from Mackey, Jauch, and Piron are analyzed and the measurement problem discussed from three ways of view: the introduction of a cut by Georg Suessmann, the scaling formalism from Klaus Hepp, and the philosophy from Bernulf Kanitschneider. Especially the critique given by Albert Einstein on the Bohr-Heisenberg Copenhagen interpretation and the completeness of a realistic quantum theory by the EPR thought experiment (called from Einstein, Podolsky, and Rosen) is more detailedly studied and extended to a holomorphic realism, in which the measurement quantities become visible as boundary values of a holomorphic function. This analytic continuation throws a new light on the body-soul parallelism, which exceeds the positions of Platon and Feigl. Beside the decoherence also the superselection rules, which are extensively discussed, are an example for a realistic state reduction - however the nonlocality of realistic quantum mechanics forces to a dualism of Higgs' symmetry breaking with local decoherence in the terrestrial laboratory. The position of a holomorphic barycentric realism is worked out by regress to the quantum field theory of Lehmann, Symanzik, and Zimmermann (LSZ) with its reduction formula. Quantum-cosmological implications, non-commutative geometry, K theory, and background field are also discussed. The newly designed knowledge theory of the holomorphic, barycentric realism - which in the classical limit goes over in a critical realism - forms also a bridge to a deepened humanism, which cannot be constructed from purely classical physics. As

Noncanonical Hamiltonian mechanics

International Nuclear Information System (INIS)

Litteljohn, R.G.

1986-01-01

Noncanonical variables in Hamiltonian mechanics were first used by Lagrange in 1808. In spite of this, most work in Hamiltonian mechanics has been carried out in canonical variables, up to this day. One reason for this is that noncanonical coordinates are seldom needed for mechanical problems based on Lagrangians of the form L = T - V, where T is the kinetic energy and V is the potential energy. Of course, such Lagrangians arise naturally in celestial mechanics, and as a result they form the paradigms of nineteenth-century mechanics and have become enshrined in all the mechanics textbooks. Certain features of modern problems, however, lead to the use of noncanonical coordinates. Among these are issues of gauge invariance and singular Lagrange a Poisson structures. In addition, certain problems, like the flow of magnetic-field lines in physical space, are naturally formulated in terms of noncanonical coordinates. None of these features is present in the nineteenth-century paradigms of mechanics, but they do arise in problems involving particle motion in the presence of magnetic fields. For example, the motion of a particle in an electromagnetic wave is an important one in plasma physics, but the usual Hamiltonian formulation is gauge dependent. For this problem, noncanonical approaches based on Lagrangians in phase space lead to powerful computational techniques which are gauge invariant. In the limit of strong magnetic fields, particle motion becomes 'guiding-center motion'. Guiding-center motion is also best understood in terms of noncanonical coordinates. Finally the flow of magnetic-field lines through physical space is a Hamiltonian system which is best understood with noncanonical coordinates. No doubt many more systems will arise in the future for which these noncanonical techniques can be applied. (author)

Present state and problems of radiological protection monitoring for high energy electron accelerator facilities in SPring-8

International Nuclear Information System (INIS)

Miyamoto, Yukihiro; Harada, Yasunori; Ueda, Hisao

1998-09-01

The present state and problems of the radiological protection monitoring for the high-energy electron accelerator are summarized. In the radiological protection monitoring for SPring-8, a third generation synchrotron radiation facility, there are many problems specific to the high-energy electron accelerator. This report describes the monitoring technique of pulsed radiation, high-energy radiation and low-energy radiation, and their problems. The management of induced radioactivity and the effects of electro-magnetic noise to monitoring instruments are also discussed. (author)

Incentive compatibility in kidney exchange problems.

Science.gov (United States)

Villa, Silvia; Patrone, Fioravante

2009-12-01

The problem of kidney exchanges shares common features with the classical problem of exchange of indivisible goods studied in the mechanism design literature, while presenting additional constraints on the size of feasible exchanges. The solution of a kidney exchange problem can be summarized in a mapping from the relevant underlying characteristics of the players (patients and their donors) to the set of matchings. The goal is to select only matchings maximizing a chosen welfare function. Since the final outcome heavily depends on the private information in possess of the players, a basic requirement in order to reach efficiency is the truthful revelation of this information. We show that for the kidney exchange problem, a class of (in principle) efficient mechanisms does not enjoy the incentive compatibility property and therefore is subject to possible manipulations made by the players in order to profit of the misrepresentation of their private information.

Hydro-mechanical foundation for blood swirling vortex flows formation in the cardio-vascular system and the problem of artificial heart creation

Directory of Open Access Journals (Sweden)

Sergey G. Chefranov

2013-11-01

Full Text Available Leonardo da Vinci perhaps was the first who paid attention to the energetic efficiency of existence of vortices emerging near sines of Valsalva and defining normal functioning (opening of aortal valve. However up to now a fundamental problem of defining of mechanisms of mysterious energetic efficiency of functioning of cardio-vascular system (CVS of blood feeding of the organism is still remaining significantly not solved and this is, for example, one of the main restriction for the creation of artificial heart and corresponding valve systems. In the present paper, results witnessing possible important role of the very hydro-mechanical mechanism in the realization of the noted energetic efficiency of CVS due to formation in the CVS of spiral structural organization of the arterial blood flow observed by methods of MRT and color Doppler-measuring in the left ventricular of the heart and in aorta.

Generalization of Abel's mechanical problem: The extended isochronicity condition and the superposition principle

Energy Technology Data Exchange (ETDEWEB)

Kinugawa, Tohru, E-mail: kinugawa@phoenix.kobe-u.ac.jp [Institute for Promotion of Higher Education, Kobe University, Kobe 657-8501 (Japan)

2014-02-15

This paper presents a simple but nontrivial generalization of Abel's mechanical problem, based on the extended isochronicity condition and the superposition principle. There are two primary aims. The first one is to reveal the linear relation between the transit-time T and the travel-length X hidden behind the isochronicity problem that is usually discussed in terms of the nonlinear equation of motion (d{sup 2}X)/(dt{sup 2}) +(dU)/(dX) =0 with U(X) being an unknown potential. Second, the isochronicity condition is extended for the possible Abel-transform approach to designing the isochronous trajectories of charged particles in spectrometers and/or accelerators for time-resolving experiments. Our approach is based on the integral formula for the oscillatory motion by Landau and Lifshitz [Mechanics (Pergamon, Oxford, 1976), pp. 27–29]. The same formula is used to treat the non-periodic motion that is driven by U(X). Specifically, this unknown potential is determined by the (linear) Abel transform X(U) ∝ A[T(E)], where X(U) is the inverse function of U(X), A=(1/√(π))∫{sub 0}{sup E}dU/√(E−U) is the so-called Abel operator, and T(E) is the prescribed transit-time for a particle with energy E to spend in the region of interest. Based on this Abel-transform approach, we have introduced the extended isochronicity condition: typically, τ = T{sub A}(E) + T{sub N}(E) where τ is a constant period, T{sub A}(E) is the transit-time in the Abel type [A-type] region spanning X > 0 and T{sub N}(E) is that in the Non-Abel type [N-type] region covering X < 0. As for the A-type region in X > 0, the unknown inverse function X{sub A}(U) is determined from T{sub A}(E) via the Abel-transform relation X{sub A}(U) ∝ A[T{sub A}(E)]. In contrast, the N-type region in X < 0 does not ensure this linear relation: the region is covered with a predetermined potential U{sub N}(X) of some arbitrary choice, not necessarily obeying the Abel-transform relation. In

Portfolio selection problem with liquidity constraints under non-extensive statistical mechanics

International Nuclear Information System (INIS)

Zhao, Pan; Xiao, Qingxian

2016-01-01

In this study, we consider the optimal portfolio selection problem with liquidity limits. A portfolio selection model is proposed in which the risky asset price is driven by the process based on non-extensive statistical mechanics instead of the classic Wiener process. Using dynamic programming and Lagrange multiplier methods, we obtain the optimal policy and value function. Moreover, the numerical results indicate that this model is considerably different from the model based on the classic Wiener process, the optimal strategy is affected by the non-extensive parameter q, the increase in the investment in the risky asset is faster at a larger parameter q and the increase in wealth is similar.

Three-body problem in quantum mechanics: Hyperspherical elliptic coordinates and harmonic basis sets

International Nuclear Information System (INIS)

Aquilanti, Vincenzo; Tonzani, Stefano

2004-01-01

Elliptic coordinates within the hyperspherical formalism for three-body problems were proposed some time ago [V. Aquilanti, S. Cavalli, and G. Grossi, J. Chem. Phys. 85, 1362 (1986)] and recently have also found application, for example, in chemical reaction theory [see O. I. Tolstikhin and H. Nakamura, J. Chem. Phys. 108, 8899 (1998)]. Here we consider their role in providing a smooth transition between the known 'symmetric' and 'asymmetric' parametrizations, and focus on the corresponding hyperspherical harmonics. These harmonics, which will be called hyperspherical elliptic, involve products of two associated Lame polynomials. We will provide an expansion of these new sets in a finite series of standard hyperspherical harmonics, producing a powerful tool for future applications in the field of scattering and bound-state quantum-mechanical three-body problems

Higgs, moduli problem, baryogenesis and large volume compactifications

Energy Technology Data Exchange (ETDEWEB)

Higaki, Tetsutaro [RIKEN Nishina Center, Saitama (Japan). Mathematical Physics Lab.; Kamada, Kohei [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Takahashi, Fuminobu [Tohoku Univ., Sendai (Japan). Dept. of Physics

2012-07-15

We consider the cosmological moduli problem in the context of high-scale supersymmetry breaking suggested by the recent discovery of the standard-model like Higgs boson. In order to solve the notorious moduli-induced gravitino problem, we focus on the LARGE volume scenario, in which the modulus decay into gravitinos can be kinematically forbidden. We then consider the Affleck-Dine mechanism with or without an enhanced coupling with the inflaton, taking account of possible Q-ball formation. We show that the baryon asymmetry of the present Universe can be generated by the Affleck-Dine mechanism in LARGE volume scenario, solving the moduli and gravitino problems.

Higgs, moduli problem, baryogenesis and large volume compactifications

International Nuclear Information System (INIS)

Higaki, Tetsutaro; Takahashi, Fuminobu

2012-07-01

We consider the cosmological moduli problem in the context of high-scale supersymmetry breaking suggested by the recent discovery of the standard-model like Higgs boson. In order to solve the notorious moduli-induced gravitino problem, we focus on the LARGE volume scenario, in which the modulus decay into gravitinos can be kinematically forbidden. We then consider the Affleck-Dine mechanism with or without an enhanced coupling with the inflaton, taking account of possible Q-ball formation. We show that the baryon asymmetry of the present Universe can be generated by the Affleck-Dine mechanism in LARGE volume scenario, solving the moduli and gravitino problems.

Technical diagnostics functioning machines and mechanisms

Science.gov (United States)

Kiselev, M. I.; Pronyakin, V. I.; Tulekbaeva, A. K.

2018-02-01

Article discusses the machines and mechanisms technical state monitoring problem. Approaches for estimating mechanical systems current technical state, defects detection and evaluation of mechanical elements degradation levels are considered. The paper analyzes the traditional methods offered in international and national standards, especially vibrodiagnostics. An advanced phase method is presented which is based on registration the kinematic parameters of the mechanism running cycle. The result of coupling the phase method and mathematical modeling is shown, and simulation comparison with the experimental data is presented.

Numerical multistep methods for the efficient solution of quantum mechanics and related problems

International Nuclear Information System (INIS)

Anastassi, Z.A.; Simos, T.E.

2009-01-01

In this paper we present the recent development in the numerical integration of the Schroedinger equation and related systems of ordinary differential equations with oscillatory solutions, such as the N-body problem. We examine several types of multistep methods (explicit, implicit, predictor-corrector, hybrid) and several properties (P-stability, trigonometric fitting of various orders, phase fitting, high phase-lag order, algebraic order). We analyze the local truncation error and the stability of the methods. The error for the Schroedinger equation is also presented, which reveals the relation of the error to the energy. The efficiency of the methods is evaluated through the integration of five problems. Figures are presented and analyzed and some general conclusions are made. Code written in Maple is given for the development of all methods analyzed in this paper. Also the subroutines written in Matlab, that concern the integration of the methods, are presented.

The limit passage of space curvature in problems of celestial mechanics with the generalized Kepler and Hooke potentials

Science.gov (United States)

Vozmishcheva, Tatiana

2016-09-01

The connection between the problems of celestial mechanics: the Kepler problem, the two-center problem and the two body problem in spaces of constant curvature with the generalized Kepler and Hooke potentials is investigated. The limit passage in the two-center and two body problems in the Lobachevsky space and on a sphere is carried out as λto0 (λ is the curvature of the corresponding space) for the two potentials. The potentials and metrics in spaces under study are written in the gnomonic coordinates. It is shown that as the curvature radius tends to infinity, the generalized gravitational and elastic potentials transform to the Kepler and Hooke forms in the Euclidean space.

Maternal Childhood Maltreatment and Offspring Emotional and Behavioral Problems:Maternal and Paternal Mechanisms of Risk Transmission

NARCIS (Netherlands)

Rijlaarsdam, J; Stevens, Gonneke|info:eu-repo/dai/nl/269103775; Jansen, P.; Ringoot, A.P.; Jaddoe, V.W.V.; Hofman, A.; Verhulst, F.; Hudziak, J.J.; Tiemeier, H.

2014-01-01

This study examined hostility and harsh discipline of both mothers and fathers as potential mechanisms explaining the association between a maternal maltreatment history and her offspring's internalizing and externalizing problems. Prospective data from fetal life to age 6 were collected from a

Quantum mechanics for pedestrians

CERN Document Server

Pade, Jochen

2014-01-01

This book provides an introduction into the fundamentals of non-relativistic quantum mechanics. In Part 1, the essential principles are developed. Applications and extensions of the formalism can be found in Part 2. The book includes not only material that is presented in traditional textbooks on quantum mechanics, but also discusses in detail current issues such as interaction-free quantum measurements, neutrino oscillations, various topics in the field of quantum information as well as fundamental problems and epistemological questions, such as the measurement problem, entanglement, Bell's inequality, decoherence, and the realism debate. A chapter on current interpretations of quantum mechanics concludes the book. To develop quickly and clearly the main principles of quantum mechanics and its mathematical formulation, there is a systematic change between wave mechanics and algebraic representation in the first chapters. The required mathematical tools are introduced step by step. Moreover, the appendix coll...

The presentation of the mind-brain problem in leading psychiatry journals

Directory of Open Access Journals (Sweden)

Alexander Moreira-Almeida

2018-02-01

Full Text Available Objective: The mind-brain problem (MBP has marked implications for psychiatry, but has been poorly discussed in the psychiatric literature. This paper evaluates the presentation of the MBP in the three leading general psychiatry journals during the last 20 years. Methods: Systematic review of articles on the MBP published in the three general psychiatry journals with the highest impact factor from 1995 to 2015. The content of these articles was analyzed and discussed in the light of contemporary debates on the MBP. Results: Twenty-three papers, usually written by prestigious authors, explicitly discussed the MBP and received many citations (mean = 130. The two main categories were critiques of dualism and defenses of physicalism (mind as a brain product. These papers revealed several misrepresentations of theoretical positions and lacked relevant contemporary literature. Without further discussion or evidence, they presented the MBP as solved, dualism as an old-fashioned or superstitious idea, and physicalism as the only rational and empirically confirmed option. Conclusion: The MBP has not been properly presented and discussed in the three leading psychiatric journals in the last 20 years. The few articles on the topic have been highly cited, but reveal misrepresentations and lack of careful philosophical discussion, as well as a strong bias against dualism and toward a materialist/physicalist approach to psychiatry.

A Finite-Volume computational mechanics framework for multi-physics coupled fluid-stress problems

International Nuclear Information System (INIS)

Bailey, C; Cross, M.; Pericleous, K.

1998-01-01

Where there is a strong interaction between fluid flow, heat transfer and stress induced deformation, it may not be sufficient to solve each problem separately (i.e. fluid vs. stress, using different techniques or even different computer codes). This may be acceptable where the interaction is static, but less so, if it is dynamic. It is desirable for this reason to develop software that can accommodate both requirements (i.e. that of fluid flow and that of solid mechanics) in a seamless environment. This is accomplished in the University of Greenwich code PHYSICA, which solves both the fluid flow problem and the stress-strain equations in a unified Finite-Volume environment, using an unstructured computational mesh that can deform dynamically. Example applications are given of the work of the group in the metals casting process (where thermal stresses cause elasto- visco-plastic distortion)

SEACAS Theory Manuals: Part 1. Problem Formulation in Nonlinear Solid Mechancis

Energy Technology Data Exchange (ETDEWEB)

Attaway, S.W.; Laursen, T.A.; Zadoks, R.I.

1998-08-01

This report gives an introduction to the basic concepts and principles involved in the formulation of nonlinear problems in solid mechanics. By way of motivation, the discussion begins with a survey of some of the important sources of nonlinearity in solid mechanics applications, using wherever possible simple one dimensional idealizations to demonstrate the physical concepts. This discussion is then generalized by presenting generic statements of initial/boundary value problems in solid mechanics, using linear elasticity as a template and encompassing such ideas as strong and weak forms of boundary value problems, boundary and initial conditions, and dynamic and quasistatic idealizations. The notational framework used for the linearized problem is then extended to account for finite deformation of possibly inelastic solids, providing the context for the descriptions of nonlinear continuum mechanics, constitutive modeling, and finite element technology given in three companion reports.

Comparison of some evolutionary algorithms for optimization of the path synthesis problem

Science.gov (United States)

Grabski, Jakub Krzysztof; Walczak, Tomasz; Buśkiewicz, Jacek; Michałowska, Martyna

2018-01-01

The paper presents comparison of the results obtained in a mechanism synthesis by means of some selected evolutionary algorithms. The optimization problem considered in the paper as an example is the dimensional synthesis of the path generating four-bar mechanism. In order to solve this problem, three different artificial intelligence algorithms are employed in this study.

Sleep problems and daily functioning in children with ADHD: An investigation of the role of impairment, ADHD presentations, and psychiatric comorbidity

DEFF Research Database (Denmark)

Virring, Anne; Lambek, Rikke; Jennum, Poul Jørgen

2017-01-01

, the Weiss Functional Impairment Rating Scale, and the ADHD Rating Scale. RESULTS: We found a moderate, positive correlation between sleep problems and impaired functioning in both children with ADHD and in typically developed children. ADHD presentations did not differ significantly with respect to sleep......OBJECTIVE: Little systematic information is available regarding how sleep problems influence daytime functioning in children with ADHD, as the role of ADHD presentations and comorbidity is unclear. METHOD: In total, 397 children were assessed with the Children's Sleep Habits Questionnaire...... problem profile, but having a comorbid internalizing or autistic disorder lead to higher sleep problem score. CONCLUSION: Sleep problems and impaired daily functioning were more common in children with ADHD, but the overall association between sleep problems and impaired daily functioning was similar...

Applications of a constrained mechanics methodology in economics

International Nuclear Information System (INIS)

Janova, Jitka

2011-01-01

This paper presents instructive interdisciplinary applications of constrained mechanics calculus in economics on a level appropriate for undergraduate physics education. The aim of the paper is (i) to meet the demand for illustrative examples suitable for presenting the background of the highly expanding research field of econophysics even at the undergraduate level and (ii) to enable the students to gain a deeper understanding of the principles and methods routinely used in mechanics by looking at the well-known methodology from the different perspective of economics. Two constrained dynamic economic problems are presented using the economic terminology in an intuitive way. First, the Phillips model of the business cycle is presented as a system of forced oscillations and the general problem of two interacting economies is solved by the nonholonomic dynamics approach. Second, the Cass-Koopmans-Ramsey model of economical growth is solved as a variational problem with a velocity-dependent constraint using the vakonomic approach. The specifics of the solution interpretation in economics compared to mechanics is discussed in detail, a discussion of the nonholonomic and vakonomic approaches to constrained problems in mechanics and economics is provided and an economic interpretation of the Lagrange multipliers (possibly surprising for the students of physics) is carefully explained. This paper can be used by the undergraduate students of physics interested in interdisciplinary physics applications to gain an understanding of the current scientific approach to economics based on a physical background, or by university teachers as an attractive supplement to classical mechanics lessons.

Applications of a constrained mechanics methodology in economics

Science.gov (United States)

Janová, Jitka

2011-11-01

This paper presents instructive interdisciplinary applications of constrained mechanics calculus in economics on a level appropriate for undergraduate physics education. The aim of the paper is (i) to meet the demand for illustrative examples suitable for presenting the background of the highly expanding research field of econophysics even at the undergraduate level and (ii) to enable the students to gain a deeper understanding of the principles and methods routinely used in mechanics by looking at the well-known methodology from the different perspective of economics. Two constrained dynamic economic problems are presented using the economic terminology in an intuitive way. First, the Phillips model of the business cycle is presented as a system of forced oscillations and the general problem of two interacting economies is solved by the nonholonomic dynamics approach. Second, the Cass-Koopmans-Ramsey model of economical growth is solved as a variational problem with a velocity-dependent constraint using the vakonomic approach. The specifics of the solution interpretation in economics compared to mechanics is discussed in detail, a discussion of the nonholonomic and vakonomic approaches to constrained problems in mechanics and economics is provided and an economic interpretation of the Lagrange multipliers (possibly surprising for the students of physics) is carefully explained. This paper can be used by the undergraduate students of physics interested in interdisciplinary physics applications to gain an understanding of the current scientific approach to economics based on a physical background, or by university teachers as an attractive supplement to classical mechanics lessons.

Applications of a constrained mechanics methodology in economics

Energy Technology Data Exchange (ETDEWEB)

Janova, Jitka, E-mail: janova@mendelu.cz [Department of Theoretical Physics and Astrophysics, Faculty of Science, Masaryk University, Kotlarska 2, 611 37 Brno (Czech Republic); Department of Statistics and Operation Analysis, Faculty of Business and Economics, Mendel University in Brno, Zemedelska 1, 613 00 Brno (Czech Republic)

2011-11-15

This paper presents instructive interdisciplinary applications of constrained mechanics calculus in economics on a level appropriate for undergraduate physics education. The aim of the paper is (i) to meet the demand for illustrative examples suitable for presenting the background of the highly expanding research field of econophysics even at the undergraduate level and (ii) to enable the students to gain a deeper understanding of the principles and methods routinely used in mechanics by looking at the well-known methodology from the different perspective of economics. Two constrained dynamic economic problems are presented using the economic terminology in an intuitive way. First, the Phillips model of the business cycle is presented as a system of forced oscillations and the general problem of two interacting economies is solved by the nonholonomic dynamics approach. Second, the Cass-Koopmans-Ramsey model of economical growth is solved as a variational problem with a velocity-dependent constraint using the vakonomic approach. The specifics of the solution interpretation in economics compared to mechanics is discussed in detail, a discussion of the nonholonomic and vakonomic approaches to constrained problems in mechanics and economics is provided and an economic interpretation of the Lagrange multipliers (possibly surprising for the students of physics) is carefully explained. This paper can be used by the undergraduate students of physics interested in interdisciplinary physics applications to gain an understanding of the current scientific approach to economics based on a physical background, or by university teachers as an attractive supplement to classical mechanics lessons.

Coping in the World of Work. Practice in Problem Solving. Presentation Scripts. Filmstrip No. 1: Problems on the Job; and Filmstrip No. 2: Work Entry and Job Adjustment Problems.

Science.gov (United States)

Ohio State Univ., Columbus. Center for Vocational Education.

Presentation scripts for two sound filmstrips are contained in this document, which accompanies a career development unit on coping in the world of work designed to assist students in developing coping strategies to deal with work entry and job adjustment problems. (Other components of the unit--instructor's handbook, student guide, and…

Schrödinger problem, Lévy processes, and noise in relativistic quantum mechanics

Science.gov (United States)

Garbaczewski, Piotr; Klauder, John R.; Olkiewicz, Robert

1995-05-01

The main purpose of the paper is an essentially probabilistic analysis of relativistic quantum mechanics. It is based on the assumption that whenever probability distributions arise, there exists a stochastic process that is either responsible for the temporal evolution of a given measure or preserves the measure in the stationary case. Our departure point is the so-called Schrödinger problem of probabilistic evolution, which provides for a unique Markov stochastic interpolation between any given pair of boundary probability densities for a process covering a fixed, finite duration of time, provided we have decided a priori what kind of primordial dynamical semigroup transition mechanism is involved. In the nonrelativistic theory, including quantum mechanics, Feynman-Kac-like kernels are the building blocks for suitable transition probability densities of the process. In the standard ``free'' case (Feynman-Kac potential equal to zero) the familiar Wiener noise is recovered. In the framework of the Schrödinger problem, the ``free noise'' can also be extended to any infinitely divisible probability law, as covered by the Lévy-Khintchine formula. Since the relativistic Hamiltonians ||∇|| and √-Δ+m2 -m are known to generate such laws, we focus on them for the analysis of probabilistic phenomena, which are shown to be associated with the relativistic wave (D'Alembert) and matter-wave (Klein-Gordon) equations, respectively. We show that such stochastic processes exist and are spatial jump processes. In general, in the presence of external potentials, they do not share the Markov property, except for stationary situations. A concrete example of the pseudodifferential Cauchy-Schrödinger evolution is analyzed in detail. The relativistic covariance of related wave equations is exploited to demonstrate how the associated stochastic jump processes comply with the principles of special relativity.

Design and optimization of a bend-and-sweep compliant mechanism

International Nuclear Information System (INIS)

Tummala, Y; Frecker, M I; Wissa, A A; Hubbard Jr, J E

2013-01-01

A novel contact aided compliant mechanism called bend-and-sweep compliant mechanism is presented in this paper. This mechanism has nonlinear stiffness properties in two orthogonal directions. An angled compliant joint (ACJ) is the fundamental element of this mechanism. Geometric parameters of ACJs determine the stiffness of the compliant mechanism. This paper presents the design and optimization of bend-and-sweep compliant mechanism. A multi-objective optimization problem was formulated for design optimization of the bend-and-sweep compliant mechanism. The objectives of the optimization problem were to maximize or minimize the bending and sweep displacements, depending on the situation, while minimizing the von Mises stress and mass of each mechanism. This optimization problem was solved using NSGA-II (a genetic algorithm). The results of this optimization for a single ACJ during upstroke and downstroke are presented in this paper. Results of two different loading conditions used during optimization of a single ACJ for upstroke are presented. Finally, optimization results comparing the performance of compliant mechanisms with one and two ACJs are also presented. It can be inferred from these results that the number of ACJs and the design of each ACJ determines the stiffness of the bend-and-sweep compliant mechanism. These mechanisms can be used in various applications. The goal of this research is to improve the performance of ornithopters by passively morphing their wings. In order to achieve a bio-inspired wing gait called continuous vortex gait, the wings of the ornithopter need to bend, and sweep simultaneously. This can be achieved by inserting the bend-and-sweep compliant mechanism into the leading edge wing spar of the ornithopters. (paper)

Optimal Control of Mechanical Systems

Directory of Open Access Journals (Sweden)

Vadim Azhmyakov

2007-01-01

Full Text Available In the present work, we consider a class of nonlinear optimal control problems, which can be called “optimal control problems in mechanics.” We deal with control systems whose dynamics can be described by a system of Euler-Lagrange or Hamilton equations. Using the variational structure of the solution of the corresponding boundary-value problems, we reduce the initial optimal control problem to an auxiliary problem of multiobjective programming. This technique makes it possible to apply some consistent numerical approximations of a multiobjective optimization problem to the initial optimal control problem. For solving the auxiliary problem, we propose an implementable numerical algorithm.

[The theory of mechanical activity of lungs--a creation history, the present and development prospects].

Science.gov (United States)

Tetenev, F F; Tetenev, K F

2014-01-01

In article the history of creation of the doctrine about respiratory movements of lungs, history of classical mechanics of breathing is stated. Supervision of the paradoxical facts which became a basis for hypothesis creation, then the theory of mechanical activity of lungs are presented. The facts proving mechanical activity of lungs on an inspiration and an expiration are given. Options of interaction of intra pulmonary and extra pulmonary sources of mechanical energy are considered. Theoretical justification for development of the new direction of studying of physiology of mechanical movements of the internal which does not have own skeleton is stated.

Mechanics

CERN Document Server

Hartog, J P Den

1961-01-01

First published over 40 years ago, this work has achieved the status of a classic among introductory texts on mechanics. Den Hartog is known for his lively, discursive and often witty presentations of all the fundamental material of both statics and dynamics (and considerable more advanced material) in new, original ways that provide students with insights into mechanical relationships that other books do not always succeed in conveying. On the other hand, the work is so replete with engineering applications and actual design problems that it is as valuable as a reference to the practicing e

Solving-Problems and Hypermedia Systems

Directory of Open Access Journals (Sweden)

Ricardo LÓPEZ FERNÁNDEZ

2009-06-01

Full Text Available The solving problems like the transfer constitute two nuclei, related, essential in the cognitive investigation and in the mathematical education. No is in and of itself casual that, from the first moment, in the investigations on the application gives the computer science to the teaching the mathematics, cybernetic models were developed that simulated processes problem solving and transfer cotexts (GPS, 1969 and IDEA (Interactive Decision Envisioning Aid, Pea, BrunerCohen, Webster & Mellen, 1987. The present articulates it analyzes, that can contribute to the development in this respect the new technologies hypermedias, give applications that are good to implement processes of learning the heuristic thought and give the capacity of «transfer». From our perspective and from the experience that we have developed in this field, to carry out a function gives analysis and the theories on the problem solving, it requires that we exercise a previous of interpretation the central aspsects over the theories gives the solving problem and transfer starting from the classic theories on the prosecution of the information. In this sense, so much the theory gives the dual memory as the most recent, J. Anderson (1993 based on the mechanisms activation nodes information they allow to establish an interpretation suggester over the mental mechanism that you/they operate in the heuristic processes. On this analysis, the present articulates it develops a theoritical interpretation over the function gives the supports based on technology hypermedia advancing in the definition of a necessary theoretical body, having in it counts that on the other hand the practical experimentation is permanent concluding in the efficiency and effectiveness gives the support hypermedia like mechanism of comunication in the processes heuristic learning.

Prevalence, putative mechanisms, and current management of sleep problems during chemotherapy for cancer

Directory of Open Access Journals (Sweden)

Palesh O

2012-12-01

Full Text Available Oxana Palesh,1 Luke Peppone,2 Pasquale F Innominato,3–5 Michelle Janelsins,2 Monica Jeong,1 Lisa Sprod,7 Josee Savard,6 Max Rotatori,1 Shelli Kesler,1 Melinda Telli,1 Karen Mustian21Stanford University School of Medicine, Stanford, CA, USA; 2University of Rochester School of Medicine and Dentistry, Rochester, NY, USA; 3INSERM, UMRS 776, Biological Rhythms and Cancers, Villejuif, France; 4Faculty of Medicine, Universite Paris Sud, le Kremlin-Bicêtre, France; 5APHP, Chronotherapy Unit, Department of Oncology, Paul Brousse Hospital, Villejuif, France; 6Laval University, Quebec, Canada; 7University of North Carolina, Wilmington, NC, USAAbstract: Sleep problems are highly prevalent in cancer patients undergoing chemotherapy. This article reviews existing evidence on etiology, associated symptoms, and management of sleep problems associated with chemotherapy treatment during cancer. It also discusses limitations and methodological issues of current research. The existing literature suggests that subjectively and objectively measured sleep problems are the highest during the chemotherapy phase of cancer treatments. A possibly involved mechanism reviewed here includes the rise in the circulating proinflammatory cytokines and the associated disruption in circadian rhythm in the development and maintenance of sleep dysregulation in cancer patients during chemotherapy. Various approaches to the management of sleep problems during chemotherapy are discussed with behavioral intervention showing promise. Exercise, including yoga, also appear to be effective and safe at least for subclinical levels of sleep problems in cancer patients. Numerous challenges are associated with conducting research on sleep in cancer patients during chemotherapy treatments and they are discussed in this review. Dedicated intervention trials, methodologically sound and sufficiently powered, are needed to test current and novel treatments of sleep problems in cancer patients

The effects of students' reasoning abilities on conceptual understandings and problem-solving skills in introductory mechanics

International Nuclear Information System (INIS)

Ates, S; Cataloglu, E

2007-01-01

The purpose of this study was to determine if there are relationships among freshmen/first year students' reasoning abilities, conceptual understandings and problem-solving skills in introductory mechanics. The sample consisted of 165 freshmen science education prospective teachers (female = 86, male = 79; age range 17-21) who were enrolled in an introductory physics course. Data collection was done during the fall semesters in two successive years. At the beginning of each semester, the force concept inventory (FCI) and the classroom test of scientific reasoning (CTSR) were administered to assess students' initial understanding of basic concepts in mechanics and reasoning levels. After completing the course, the FCI and the mechanics baseline test (MBT) were administered. The results indicated that there was a significant difference in problem-solving skill test mean scores, as measured by the MBT, among concrete, formal and postformal reasoners. There were no significant differences in conceptual understanding levels of pre- and post-test mean scores, as measured by FCI, among the groups. The Benferroni post hoc comparison test revealed which set of reasoning levels showed significant difference for the MBT scores. No statistical difference between formal and postformal reasoners' mean scores was observed, while the mean scores between concrete and formal reasoners and concrete and postformal reasoners were statistically significantly different

Problems associated with accelerated thermal aging of electrical equipment

International Nuclear Information System (INIS)

Isgro, J.R.

1984-01-01

This paper discusses the potential problems that may be experienced when accounting for aging mechanisms in organic polymers when utilizing accelerated thermal aging techniques for electrical equipment qualification. Included are discussions of actual experiences and problems encountered in the qualification of electrical and electronic equipment for a complete nuclear power plant. The wide variety of approaches to thermal accelerated aging by various manufacturers of diverse equipment types provides depth to the discussion. A description of how to account for aging mechanisms is also presented

Present state and problems of uranium fuel fabrication businesses

International Nuclear Information System (INIS)

Yuki, Akio

1981-01-01

The businesses of uranium fuel fabrication converting uranium hexafluoride to uranium dioxide powder and forming fuel assemblies are the field of most advanced industrialization among nuclear fuel cycle industries in Japan. At present, five plants of four companies engage in this business, and their yearly sales exceeded 20 billion yen. All companies are planning the augmentation of installation capacity to meet the growth of nuclear power generation. The companies of uranium fuel fabrication make the nuclear fuel of the specifications specified by reactor manufacturers as the subcontractors. In addition to initially loaded fuel, the fuel for replacement is required, therefore the demand of uranium fuel is relatively stable. As for the safety of enriched uranium flowing through the farbicating processes, the prevention of inhaling uranium powder by workers and the precaution against criticality are necessary. Also the safeguard measures are imposed so as not to convert enriched uranium to other purposes than peacefull ones. The strict quality control and many times of inspections are carried out to insure the soundness of nuclear fuel. The growth of the business of uranium fuel fabrication and the regulation of the businesses by laws are described. As the problems for the future, the reduction of fabrication cost, the promotion of research and development and others are pointed out. (Kako, I.)

Introduction to continuum mechanics

CERN Document Server

Rubin, David; Lai, W Michael

1994-01-01

Continuum mechanics studies the response of materials to different loading conditions. The concept of tensors is introduced through the idea of linear transformation in a self-contained chapter, and the interrelation of direct notation, indicial notation and matrix operations is clearly presented. A wide range of idealized materials are considered through simple static and dynamic problems, and the book contains an abundance of illustrative examples and problems, many with solutions. Through the addition of more advanced material (solution of classical elasticity problems, constitutive e

Applied mechanics of solids

CERN Document Server

Bower, Allan F

2009-01-01

Modern computer simulations make stress analysis easy. As they continue to replace classical mathematical methods of analysis, these software programs require users to have a solid understanding of the fundamental principles on which they are based. Develop Intuitive Ability to Identify and Avoid Physically Meaningless Predictions Applied Mechanics of Solids is a powerful tool for understanding how to take advantage of these revolutionary computer advances in the field of solid mechanics. Beginning with a description of the physical and mathematical laws that govern deformation in solids, the text presents modern constitutive equations, as well as analytical and computational methods of stress analysis and fracture mechanics. It also addresses the nonlinear theory of deformable rods, membranes, plates, and shells, and solutions to important boundary and initial value problems in solid mechanics. The author uses the step-by-step manner of a blackboard lecture to explain problem solving methods, often providing...

Statics formulas and problems : engineering mechanics 1

CERN Document Server

Gross, Dietmar; Wriggers, Peter; Schröder, Jörg; Müller, Ralf

2017-01-01

This book contains the most important formulas and more than 160 completely solved problems from Statics. It provides engineering students material to improve their skills and helps to gain experience in solving engineering problems. Particular emphasis is placed on finding the solution path and formulating the basic equations. Topics include: - Equilibrium - Center of Gravity, Center of Mass, Centroids - Support Reactions - Trusses - Beams, Frames, Arches - Cables - Work and Potential Energy - Static and Kinetic Friction - Moments of Inertia.

Quantum mechanics

CERN Document Server

Ghosh, P K

2014-01-01

Quantum mechanics, designed for advanced undergraduate and graduate students of physics, mathematics and chemistry, provides a concise yet self-contained introduction to the formal framework of quantum mechanics, its application to physical problems and the interpretation of the theory. Starting with a review of some of the necessary mathematics, the basic concepts are carefully developed in the text. After building a general formalism, detailed treatment of the standard material - the harmonic oscillator, the hydrogen atom, angular momentum theory, symmetry transformations, approximation methods, identical particle and many-particle systems, and scattering theory - is presented. The concluding chapter discusses the interpretation of quantum mechanics. Some of the important topics discussed in the book are the rigged Hilbert space, deformation quantization, path integrals, coherent states, geometric phases, decoherene, etc. This book is characterized by clarity and coherence of presentation.

Modern problems in applied analysis

CERN Document Server

Rogosin, Sergei

2018-01-01

This book features a collection of recent findings in Applied Real and Complex Analysis that were presented at the 3rd International Conference “Boundary Value Problems, Functional Equations and Applications” (BAF-3), held in Rzeszow, Poland on 20-23 April 2016. The contributions presented here develop a technique related to the scope of the workshop and touching on the fields of differential and functional equations, complex and real analysis, with a special emphasis on topics related to boundary value problems. Further, the papers discuss various applications of the technique, mainly in solid mechanics (crack propagation, conductivity of composite materials), biomechanics (viscoelastic behavior of the periodontal ligament, modeling of swarms) and fluid dynamics (Stokes and Brinkman type flows, Hele-Shaw type flows). The book is addressed to all readers who are interested in the development and application of innovative research results that can help solve theoretical and real-world problems.

Dynamics formulas and problems : engineering mechanics 3

CERN Document Server

Gross, Dietmar; Wriggers, Peter; Schröder, Jörg; Müller, Ralf

2017-01-01

This book contains the most important formulas and more than 190 completely solved problems from Kinetics and Hydrodynamics. It provides engineering students material to improve their skills and helps to gain experience in solving engineering problems. Particular emphasis is placed on finding the solution path and formulating the basic equations. Topics include: - Kinematics of a Point - Kinetics of a Point Mass- Dynamics of a System of Point Masses - Kinematics of Rigid Bodies - Kinetics of Rigid Bodies - Impact - Vibrations - Non-Inertial Reference Frames - Hydrodynamics .

Open problems in mathematics

CERN Document Server

Nash, Jr, John Forbes

2016-01-01

The goal in putting together this unique compilation was to present the current status of the solutions to some of the most essential open problems in pure and applied mathematics. Emphasis is also given to problems in interdisciplinary research for which mathematics plays a key role. This volume comprises highly selected contributions by some of the most eminent mathematicians in the international mathematical community on longstanding problems in very active domains of mathematical research. A joint preface by the two volume editors is followed by a personal farewell to John F. Nash, Jr. written by Michael Th. Rassias. An introduction by Mikhail Gromov highlights some of Nash’s legendary mathematical achievements. The treatment in this book includes open problems in the following fields: algebraic geometry, number theory, analysis, discrete mathematics, PDEs, differential geometry, topology, K-theory, game theory, fluid mechanics, dynamical systems and ergodic theory, cryptography, theoretical computer sc...

On some boundary value problems in quantum statistical mechanics

International Nuclear Information System (INIS)

Angelescu, N.

1978-01-01

The following two topics of equilibrium quantum statistical mechanics are discussed in this thesis: (i) the independence of the thermodynamic limit of grand-canonical pressure on the boundary conditions; (ii) the magnetic properties of free quantum gases. Problem (i) is handled with a functional integration technique. Wiener-type conditional measures are constructed for a given domain and a general class of mixed conditions on its boundary, these measures are used to write down Feynman-Kac formulae for the kernels of exp(-βH), where H is the Hamiltonian of N interacting particles in the given domain. These measures share the property that they assign the same mass as the usual Wiener measure to any set of trajectories not intersecting the boundary. Local estimates on the kernels of exp(-βH) are derived, which imply independence of the pressure on the boundary conditions in the thermodynamic limit. Problem (ii) has a historical development: since Landau's work (1930), much discussion has been devoted to the influence of the finite size on the susceptibility. In finite volume, Dirichlet boundary conditions are imposed, on the ground that they ensure gauge invariance. The thermodynamic limit of the pressure is proved, using again functional integration. The functional measure is now complex but absolutely continuous with respect to Wiener measure, so the usual local estimates hold true. The controversy in the literature was concentrated on the commutativity of the operations of H-derivation and thermodynamic limit, so the existence of this limit for the zero-field susceptibility and its surface term are proved separately, demonstrating this commutativity. The proof relies on the following result of independent interest: the perturbation theory of self-adjoint trace-class semigroups is trace-class convergent and analytic. (author)

Lavine method applied to three body problems

International Nuclear Information System (INIS)

Mourre, Eric.

1975-09-01

The methods presently proposed for the three body problem in quantum mechanics, using the Faddeev approach for proving the asymptotic completeness, come up against the presence of new singularities when the potentials considered v(α)(x(α)) for two-particle interactions decay less rapidly than /x(α)/ -2 ; and also when trials are made for solving the problem with a representation space whose dimension for a particle is lower than three. A method is given that allows the mathematical approach to be extended to three body problem, in spite of singularities. Applications are given [fr

Tube problems: worldwide statistics reviewed

International Nuclear Information System (INIS)

Anon.

1994-01-01

EPRI's Steam Generator Strategic Management Project issues an annual report on the progress being made in tackling steam generator problems worldwide, containing a wealth of detailed statistics on the status of operating units and degradation mechanisms encountered. A few highlights are presented from the latest report, issued in October 1993, which covers the period to 31 December 1992. (Author)

Enhanced Cognitive Walkthrough: Development of the Cognitive Walkthrough Method to Better Predict, Identify, and Present Usability Problems

Directory of Open Access Journals (Sweden)

Lars-Ola Bligård

2013-01-01

Full Text Available To avoid use errors when handling medical equipment, it is important to develop products with a high degree of usability. This can be achieved by performing usability evaluations in the product development process to detect and mitigate potential usability problems. A commonly used method is cognitive walkthrough (CW, but this method shows three weaknesses: poor high-level perspective, insufficient categorisation of detected usability problems, and difficulties in overviewing the analytical results. This paper presents a further development of CW with the aim of overcoming its weaknesses. The new method is called enhanced cognitive walkthrough (ECW. ECW is a proactive analytical method for analysis of potential usability problems. The ECW method has been employed to evaluate user interface designs of medical equipment such as home-care ventilators, infusion pumps, dialysis machines, and insulin pumps. The method has proved capable of identifying several potential use problems in designs.

The present state and problems of mutation breeding

International Nuclear Information System (INIS)

Balint, Andor

1983-01-01

The major achievements and problems of mutation breeding are discussed according to recent international references. Examples for the production of microorganism resistant tobacco, maize, cabbage, disease resistant sugar cane and some freeze resistant plants are listed. Special opportunities offered by mutation to increase photosynthesis and to improve yields are discussed. The significance of the new techniques to produce induced mutants by means of tissue cultures, to fix N 2 for leguminosae and to affect the activities of N 2 fixing microorganisms is emphasized. (V.N.)

Present day problems concerning the energy industry

International Nuclear Information System (INIS)

Hecker, G.

1978-01-01

Problems of the regional energy supply industry touching directly the energy supply utilities (e.g. territorial reform, power prices) are discussed. In a survey on the overall energy situation in the FRG as seen by energy supply utilities, the following conclusions are drawn: 1) The electricity supply industry is in the favourite position to make the required structural changes by utilizing primary energy for generating electric power. It offers - via electric energy - an effective opportunity for substituting oil. 2) The electricity supply industry alone will be in a position to use nuclear energy during the next few decades. A decision in favour of nuclear energy must not be at disposal to make oneself momentarily politically popular. This indispensable decision results exclusively from our responsibility for the future of our national economy and thus our society. (orig./HP) [de

Certain problems about radon. Pt.1

International Nuclear Information System (INIS)

Wu Huishan

2005-01-01

Discussion has been made on certain pointed out problems which presently influence the work and development of radon survey, and certain specific problems have been put forward which should be paid much attention and taken measures. Among the problems, some come from cognition, i.e. two kinds of balance and examination about radon, chief culprit of radon's daughter, multiply control and migration, the significance of radon in the water and soil, important standards for designing and evaluating the sites of construction projects, thoughts on the mechanism of the harm of radon and its daughters, diseases causing of both high and low radon, difficulty of emanation of indoor radon, normal low radon from natural marble; and others must be resolved specifically, i.e. establishment of national radon standards as quickly as possible, improvement of on-the-spot examination technique, national-wide radon survey with multiple disciplines and technology, the research on the mechanism of radon's harm and the establishment national radon study center. (authors)

Gender Differences in the Presentation of Observable Risk Indicators of Problem Gambling.

Science.gov (United States)

Delfabbro, Paul; Thomas, Anna; Armstrong, Andrew

2018-03-01

In many countries where gambling is legalised, there has been a strong public policy focus on the need for strategies to reduce gambling related harm. These have often included policies requiring staff in gambling venues to identify and/or assist people who might be experiencing gambling-related harm. To facilitate this process, researchers have developed visible behavioural indicators that might be used to profile potentially problematic gambling. Few of these studies have, however, examined whether such indicators or 'warning signs' might differ between men and women. In this study, we describe the results of an analysis of data drawn from 1185 fortnightly gamblers that included 338 problem gamblers as classified by the Problem Gambling Severity Index. Indicators of problem gambling were similar between males and females with a few key exceptions. Indicators reflecting emotional distress were more commonly reported by females with gambling problems, whereas problem gambling males were more likely to display aggressive behaviour towards gambling devices and others in the venue. Amongst males, signs of emotional distress as well as attempts to conceal their presence in venues from others most strongly differentiated between problem and non-problem gamblers. Amongst females, signs of anger, a decline in grooming and those attempts to access credit were the most distinguishing indicators. These findings have implications for the refinement of identification policies and practices.

Quantum information and the problem of mechanisms of biological evolution.

Science.gov (United States)

Melkikh, Alexey V

2014-01-01

One of the most important conditions for replication in early evolution is the de facto elimination of the conformational degrees of freedom of the replicators, the mechanisms of which remain unclear. In addition, realistic evolutionary timescales can be established based only on partially directed evolution, further complicating this issue. A division of the various evolutionary theories into two classes has been proposed based on the presence or absence of a priori information about the evolving system. A priori information plays a key role in solving problems in evolution. Here, a model of partially directed evolution, based on the learning automata theory, which includes a priori information about the fitness space, is proposed. A potential repository of such prior information is the states of biologically important molecules. Thus, the need for extended evolutionary synthesis is discussed. Experiments to test the hypothesis of partially directed evolution are proposed. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Quantum mechanics.Text and exercise book. 2. upd. ed.

International Nuclear Information System (INIS)

Griffiths, David J.

2012-01-01

The modern life would be without quantum mechanics no more imaginable - on their laws are founded transistors, computer chips, mobile telephones, flat displays, and numerous other things of daily life. An understanding of this theory is indispensable in order to be able to settle a matter with questions of temporary physics. Griffith's ''Intorduction to Quantum Mechanics'' presents the fundamental laws of quantum mechanics, puts carefully the mathematical foundations of the theory, and presents essential applications of quantum mechanics from the hydrogen atom until Schroedinger's cat. This book applies to studyings of natural sciences, especially of physics. It is concipated for studyings of bachelor courses at universities and throws a bridge between the conceptual core of quantum mechanics and the mathematically often expensive application to real problems. For this numerous problems are completely worked out in order to fill the matter with life. Rounded off are all chapters by a manifold of problems of all degrees of difficulty, which allow the studyings to deepen their knowledge and apply immediately. Beside a course accompanying the ''Introduction to Quantum Mechanics'' is therefore also suited for the self-study.

Scattering in relativistic particle mechanics

International Nuclear Information System (INIS)

De Bievre, S.

1986-01-01

The problem of direct interaction in relativistic particle mechanics has been extensively studied and a variety of models has been proposed avoiding the conclusions of the so-called no-interaction theorems. In this thesis the authors studied scattering in the relativistic two-body problem. He uses the results to analyze gauge invariance in Hamiltonian constraint models and the uniqueness of the symplectic structure in manifestly covariant relativistic particle mechanics. A general geometric framework that underlies approaches to relativistic particle mechanics is presented and the kinematic properties of the scattering transformation, i.e., those properties that arise solely from the invariance of the theory under the Poincare group are studied. The second part of the analysis of the relativistic two-body scattering problem is devoted to the dynamical properties of the scattering process. Using general geometric arguments, gauge invariance of the scattering transformation in the Todorov-Komar Hamiltonian constraint model is proved. Finally, quantization of the models is discussed

Fluid mechanics

International Nuclear Information System (INIS)

Granger, R.A.

1985-01-01

This text offers the most comprehensive approach available to fluid mechanics. The author takes great care to insure a physical understanding of concepts grounded in applied mathematics. The presentation of theory is followed by engineering applications, helping students develop problem-solving skills from the perspective of a professional engineer. Extensive use of detailed examples reinforces the understanding of theoretical concepts

On Conservation Forms and Invariant Solutions for Classical Mechanics Problems of Liénard Type

Directory of Open Access Journals (Sweden)

Gülden Gün Polat

2014-01-01

Full Text Available In this study we apply partial Noether and λ-symmetry approaches to a second-order nonlinear autonomous equation of the form y′′+fyy′+g(y=0, called Liénard equation corresponding to some important problems in classical mechanics field with respect to f(y and g(y functions. As a first approach we utilize partial Lagrangians and partial Noether operators to obtain conserved forms of Liénard equation. Then, as a second approach, based on the λ-symmetry method, we analyze λ-symmetries for the case that λ-function is in the form of λ(x,y,y′=λ1(x,yy′+λ2(x,y. Finally, a classification problem for the conservation forms and invariant solutions are considered.

Biased lineups: sequential presentation reduces the problem.

Science.gov (United States)

Lindsay, R C; Lea, J A; Nosworthy, G J; Fulford, J A; Hector, J; LeVan, V; Seabrook, C

1991-12-01

Biased lineups have been shown to increase significantly false, but not correct, identification rates (Lindsay, Wallbridge, & Drennan, 1987; Lindsay & Wells, 1980; Malpass & Devine, 1981). Lindsay and Wells (1985) found that sequential lineup presentation reduced false identification rates, presumably by reducing reliance on relative judgment processes. Five staged-crime experiments were conducted to examine the effect of lineup biases and sequential presentation on eyewitness recognition accuracy. Sequential lineup presentation significantly reduced false identification rates from fair lineups as well as from lineups biased with regard to foil similarity, instructions, or witness attire, and from lineups biased in all of these ways. The results support recommendations that police present lineups sequentially.

On the relation between the Einstein-Podolsky-Rosen paradox and the problem of nonlocality in quantum mechanics

International Nuclear Information System (INIS)

de Muynck, W.M.

1986-01-01

The EPR problem is studied both from an instrumentalistic and from a realistic point of view. Bohr's reply to the EPR paper is analyzed and demonstrated to be not completely representative of Bohr's general views on the possibility of defining properties of a microscopic object. A more faithful Bohrian answer would not have led Einstein to the conclusion that Bohr's completeness claim of quantum mechanics implies nonlocality. The projection postulate, already denounced in 1936 by Margenau as the source of the EPR paradox, is found to be also at the origin of the nonlocality conundrum. Its unobservability in EPR-like experiments is demonstrated, thus showing the redundancy of the idea of nonlocality in the instrumentalist interpretation of quantum mechanics. It is argued that also from a realist point of view there is no reason to assume nonlocality. The relevance of Bohm's quantum potential and of Bells inequalities with respect to the (non) locality problem is discussed

Social Goals and Conflict Strategies of Individuals with Mild to Moderate Intellectual Disabilities Who Present Problems of Aggression

Science.gov (United States)

Pert, C.; Jahoda, A.

2008-01-01

Background: A few recent studies have adopted a social cognitive perspective to explore how individuals with intellectual disabilities (IDs), who present problems of aggression, view their social world. The focus has mainly been on participants' perceptions of others' behaviour within conflict situations. The present exploratory study aims to…

Schrodinger's mechanics interpretation

CERN Document Server

Cook, David B

2018-01-01

The interpretation of quantum mechanics has been in dispute for nearly a century with no sign of a resolution. Using a careful examination of the relationship between the final form of classical particle mechanics (the Hamilton–Jacobi Equation) and Schrödinger's mechanics, this book presents a coherent way of addressing the problems and paradoxes that emerge through conventional interpretations.Schrödinger's Mechanics critiques the popular way of giving physical interpretation to the various terms in perturbation theory and other technologies and places an emphasis on development of the theory and not on an axiomatic approach. When this interpretation is made, the extension of Schrödinger's mechanics in relation to other areas, including spin, relativity and fields, is investigated and new conclusions are reached.

Time-dependent problems in quantum-mechanical state reconstruction

International Nuclear Information System (INIS)

Leonhardt, U.; Bardroff, P. J.

1997-01-01

We study the state reconstruction of wave packets that travel in time-dependent potentials. We solve the problem for explicitly time-dependent potentials. We solve the problem for explicitly time-dependent harmonic oscillators and sketch a general adaptive technique for finding the wave function that matches and observed evolution. (authors)

The problem of the motion of bodies a historical view of the development of classical mechanics

CERN Document Server

Capecchi, Danilo

2014-01-01

This book focuses on the way in which the problem of the motion of bodies has been viewed and approached over the course of human history. It is not another traditional history of mechanics but rather aims to enable the reader to fully understand the deeper ideas that inspired men, first in attempting to understand the mechanisms of motion and then in formulating theories with predictive as well as explanatory value. Given this objective, certain parts of the history of mechanics are neglected, such as fluid mechanics, statics, and astronomy after Newton. On the other hand, due attention is paid, for example, to the history of thermodynamics, which has its own particular point of view on motion. Inspired in part by historical epistemology, the book examines the various views and theories of a given historical period (synchronic analysis) and then makes comparisons between different periods (diachronic analysis). In each period, one or two of the most meaningful contributions are selected for particular attent...

Technical report on micro-mechanical versus conventional modelling in non-linear fracture mechanics

International Nuclear Information System (INIS)

2001-07-01

While conventional fracture mechanics is capable of predicting crack growth behaviour if sufficient experimental observations are available, micro-mechanical modelling can both increase the accuracy of these predictions and model phenomena that are inaccessible by the conventional theory such as the ductile-cleavage temperature transition. A common argument against micro-mechanical modelling is that it is too complicated for use in routine engineering applications. This is both a computational and an educational problem. That micro-mechanical modelling is unnecessarily complicated is certainly true in many situations. The on-going development of micro-mechanical models, computational algorithms and computer speed will however most probably diminish the computational problem rather rapidly. Compare for instance the rate of development of computational methods for structural analysis. Meanwhile micro-mechanical modelling may serve as a tool by which more simplified engineering methods can be validated. The process of receiving a wide acceptance of the new methods is probably much slower. This involves many steps. First the research community must be in reasonable agreement on the methods and their use. Then the methods have to be implemented into computer software and into code procedures. The development and acceptance of conventional fracture mechanics may serve as an historical example of the time required before a new methodology has received a wide usage. The CSNI Working Group on Integrity and Ageing (IAGE) decided to carry out a report on micro-mechanical modeling to promote this promising and valuable technique. The report presents a comparison with non-linear fracture mechanics and highlights key aspects that could lead to a better knowledge and accurate predictions. Content: - 1. Introduction; - 2. Concepts of non-linear fracture mechanics with point crack tip modelling; - 3. Micro-mechanical models for cleavage fracture; - 4, Micro-mechanical modelling of

the present state of swahili literature as an artistic and social

African Journals Online (AJOL)

Frederick Iraki

In addressing the urgent problems of present-day world (not on- ... Swahili fiction, 6 of which were written by Tanzanians; by the year 2007, the ... there are additional mechanisms of stimulation – for example, the annual Jomo Kenyatta Prize,.

Problems and solutions in thermoelasticity and magneto-thermoelasticity

CERN Document Server

Das, B

2017-01-01

This book presents problems and solutions of the mathematical theories of thermoelasticity and magnetothermoelasticity. The classical, coupled and generalized theories are solved using the eigenvalue methodology. Different methods of numerical inversion of the Laplace transform are presented and their direct applications are illustrated. The book is very useful to those interested in continuum mechanics.

Topology optimization for transient heat transfer problems

DEFF Research Database (Denmark)

Zeidan, Said; Sigmund, Ole; Lazarov, Boyan Stefanov

The focus of this work is on passive control of transient heat transfer problems using the topology optimization (TopOpt) method [1]. The goal is to find distributions of a limited amount of phase change material (PCM), within a given design domain, which optimizes the heat energy storage [2]. Our......, TopOpt has later been extended to transient problems in mechanics and photonics (e.g. [5], [6] and [7]). In the presented approach, the optimization is gradient-based, where in each iteration the non-steady heat conduction equation is solved,using the finite element method and an appropriate time......-stepping scheme. A PCM can efficiently absorb heat while keeping its temperature nearly unchanged [8]. The use of PCM ine.g. electronics [9] and mechanics [10], yields improved performance and lower costs depending on a.o., the spatial distribution of PCM.The considered problem consists in optimizing...

Introduction to quantum mechanics

CERN Document Server

Phillips, A C

2003-01-01

Introduction to Quantum Mechanics is an introduction to the power and elegance of quantum mechanics. Assuming little in the way of prior knowledge, quantum concepts are carefully and precisely presented, and explored through numerous applications and problems. Some of the more challenging aspects that are essential for a modern appreciation of the subject have been included, but are introduced and developed in the simplest way possible.Undergraduates taking a first course on quantum mechanics will find this text an invaluable introduction to the field and help prepare them for more adv

Boundary-value problems with free boundaries for elliptic systems of equations

CERN Document Server

Monakhov, V N

1983-01-01

This book is concerned with certain classes of nonlinear problems for elliptic systems of partial differential equations: boundary-value problems with free boundaries. The first part has to do with the general theory of boundary-value problems for analytic functions and its applications to hydrodynamics. The second presents the theory of quasiconformal mappings, along with the theory of boundary-value problems for elliptic systems of equations and applications of it to problems in the mechanics of continuous media with free boundaries: problems in subsonic gas dynamics, filtration theory, and problems in elastico-plasticity.

Mechanics from Newton's laws to deterministic chaos

CERN Document Server

Scheck, Florian

2018-01-01

This book covers all topics in mechanics from elementary Newtonian mechanics, the principles of canonical mechanics and rigid body mechanics to relativistic mechanics and nonlinear dynamics. It was among the first textbooks to include dynamical systems and deterministic chaos in due detail. As compared to the previous editions the present 6th edition is updated and revised with more explanations, additional examples and problems with solutions, together with new sections on applications in science.   Symmetries and invariance principles, the basic geometric aspects of mechanics as well as elements of continuum mechanics also play an important role. The book will enable the reader to develop general principles from which equations of motion follow, to understand the importance of canonical mechanics and of symmetries as a basis for quantum mechanics, and to get practice in using general theoretical concepts and tools that are essential for all branches of physics.   The book contains more than 150 problems ...

Recent experiences and problems in conducting pressure vessel surveillance examinations

International Nuclear Information System (INIS)

Perrin, J.S.

1979-01-01

Each of the commercial power reactors in the U.S.A. has a pressure vessel surveillance program. The purpose of the programs is to monitor the effects of radiation on the mechanical properties on the steel pressure vessels. A program for a given reactor includes a series of irradiation capsules containing neutron dosimeters and mechanical property specimens. The capsules are periodically removed during the life of the reactor and evaluated. The surveillance capsule examinations conducted to date have been valuable in assessing the effects of radiation on pressure vessels. However, a number of problems have been observed in the course of capsule examinations which potentially could reduce the maximum value of the data obtained. These problems are related to specimen design and preparation, capsule design and preparation, capsule installation and removal, capsule disassembly, specimen testing and evaluation, program documentation, and quality assurance. Examples of problems encountered in the preceding areas are presented in the present paper, and recommendations are made for minimization or prevention of these problems in future programs. Included in the recommendations is that appropriate ASTM standards, ASME Boiler and Pressure Vessel Code sections, and NRC regulations provide the appropriate framework for prevention of problems

Analysis of the status and problems of mechanical module manufacturing schedule of nuclear power plant

International Nuclear Information System (INIS)

Zhao Shuyu; Lu Qinwu; Li Yi

2014-01-01

An important feature of the 3rd generation nuclear power projects of AP1000 is the scale application of the modular design and construction technology. The world's first AP1000 project has been started in 2008 in our country, some problems existing in project construction process, such as the mechanical module manufacturing progress can't well meet the needs of the practical engineering. In this article, through investigating and analyzing the main cause of affecting plant mechanical module manufacturing progress, according to our country's actual situation in design, procurement and construction, explore the measures to improve module building progress in the process of AP1000 modular construction project at this stage, provide suggestions for project smooth implementation. (authors)

Nonextensive statistical mechanics: a brief review of its present status

Directory of Open Access Journals (Sweden)

CONSTANTINO TSALLIS

2002-09-01

Full Text Available We briefly review the present status of nonextensive statistical mechanics. We focus on (i the central equations of the formalism, (ii the most recent applications in physics and other sciences, (iii the a priori determination (from microscopic dynamics of the entropic index q for two important classes of physical systems, namely low-dimensional maps (both dissipative and conservative and long-range interacting many-body hamiltonian classical systems.Revisamos sumariamente o estado presente da mecânica estatística não-extensiva. Focalizamos em (i as equacões centrais do formalismo; (ii as aplicações mais recentes na física e em outras ciências, (iii a determinação a priori (da dinâmica microscópica do índice entrópico q para duas classes importantes de sistemas físicos, a saber, mapas de baixa dimensão (tanto dissipativos quanto conservativos e sistemas clássicos hamiltonianos de muitos corpos com interações de longo alcance.

gamma. -ray. Present status and problems

Energy Technology Data Exchange (ETDEWEB)

Okudaira, K [Rikkyo Univ., Tokyo (Japan). Faculty of Science

1975-01-01

As ..gamma..-ray advances straightly through space, the study on cosmic ..gamma..-ray will give the information concerning the origin directly. However, the intensity is weak, and the avoidance of background is a serious problem. The wide-spread components were studied by OSO-3. The intensity of the galactic disc component around 100 MeV was reported as (3.4+-1.0)x10/sup -5/ photons (cm/sup 2/, radian, sec)/sup -1/ by OSO-3 and 0.2x10/sup -4/ photons (cm/sup 2/, radian sec)/sup -1/ by SAS-2, and corresponds to the calculated ..gamma.. yield from ..pi../sup 0/. The strong disc component, so-called galactic center region, has been observed, and is due to the mixture of ..gamma..-ray from ..pi../sup 0/ and inverse Compton ..gamma..-ray. A peak at 476+-24 KeV was found as well as the continuous component. Special care must be taken for the observation of isotropic component, since it is hardly distinguished from the background. It is considered that the isotropic component is due to the inverse Compton scattering of 3/sup 0/K radiation in super-galactic space and the contribution from outer galaxy. The nearest point source of ..gamma..-ray is the sun. Among the other point sources, the crab nebula is the most reliable one. The energy flux of pulse component showed the spectrum of E/sup -1/. ..gamma..-ray bursts were observed by man-made satellites Vela-5 and 6. Theoretical explanation is still incomplete regarding the bursts. (Kato, T.).

Discontinuous Petrov–Galerkin method with optimal test functions for thin-body problems in solid mechanics

KAUST Repository

Niemi, Antti H.

2011-02-01

We study the applicability of the discontinuous Petrov-Galerkin (DPG) variational framework for thin-body problems in structural mechanics. Our numerical approach is based on discontinuous piecewise polynomial finite element spaces for the trial functions and approximate, local computation of the corresponding \\'optimal\\' test functions. In the Timoshenko beam problem, the proposed method is shown to provide the best approximation in an energy-type norm which is equivalent to the L2-norm for all the unknowns, uniformly with respect to the thickness parameter. The same formulation remains valid also for the asymptotic Euler-Bernoulli solution. As another one-dimensional model problem we consider the modelling of the so called basic edge effect in shell deformations. In particular, we derive a special norm for the test space which leads to a robust method in terms of the shell thickness. Finally, we demonstrate how a posteriori error estimator arising directly from the discontinuous variational framework can be utilized to generate an optimal hp-mesh for resolving the boundary layer. © 2010 Elsevier B.V.

Solutions Stability of Initial Boundary Problem, Modeling of Dynamics of Some Discrete Continuum Mechanical System

Directory of Open Access Journals (Sweden)

D. A. Eliseev

2015-01-01

Full Text Available The solution stability of an initial boundary problem for a linear hybrid system of differential equations, which models the rotation of a rigid body with two elastic rods located in the same plane is studied in the paper. To an axis passing through the mass center of the rigid body perpendicularly to the rods location plane is applied the stabilizing moment proportional to the angle of the system rotation, derivative of the angle, integral of the angle. The external moment provides a feedback. A method of studying the behavior of solutions of the initial boundary problem is proposed. This method allows to exclude from the hybrid system of differential equations partial differential equations, which describe the dynamics of distributed elements of a mechanical system. It allows us to build one equation for an angle of the system rotation. Its characteristic equation defines the stability of solutions of all the system. In the space of feedback-coefficients the areas that provide the asymptotic stability of solutions of the initial boundary problem are built up.

Self-adjoint extensions and spectral analysis in the Calogero problem

International Nuclear Information System (INIS)

Gitman, D M; Tyutin, I V; Voronov, B L

2010-01-01

In this paper, we present a mathematically rigorous quantum-mechanical treatment of a one-dimensional motion of a particle in the Calogero potential αx -2 . Although the problem is quite old and well studied, we believe that our consideration based on a uniform approach to constructing a correct quantum-mechanical description for systems with singular potentials and/or boundaries, proposed in our previous works, adds some new points to its solution. To demonstrate that a consideration of the Calogero problem requires mathematical accuracy, we discuss some 'paradoxes' inherent in the 'naive' quantum-mechanical treatment. Using a self-adjoint extension method, we construct and study all possible self-adjoint operators (self-adjoint Hamiltonians) associated with a formal differential expression for the Calogero Hamiltonian. In particular, we discuss a spontaneous scale-symmetry breaking associated with self-adjoint extensions. A complete spectral analysis of all self-adjoint Hamiltonians is presented.

Problems and chances for probabilistic fracture mechanics in the analysis of steel pressure boundary reliability

Energy Technology Data Exchange (ETDEWEB)

Staat, M [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Sicherheitsforschung und Reaktortechnik

1996-12-01

It is shown that the difficulty for probabilistic fracture mechanics (PFM) is the general problem of the high reliability of a small population. There is no way around the problem as yet. Therefore what PFM can contribute to the reliability of steel pressure boundaries is demonstrated with the example of a typical reactor pressure vessel and critically discussed. Although no method is distinguishable that could give exact failure probabilities, PFM has several additional chances. Upper limits for failure probability may be obtained together with trends for design and operating conditions. Further, PFM can identify the most sensitive parameters, improved control of which would increase reliability. Thus PFM should play a vital role in the analysis of steel pressure boundaries despite all shortcomings. (author). 19 refs, 7 figs, 1 tab.

Problems and chances for probabilistic fracture mechanics in the analysis of steel pressure boundary reliability

International Nuclear Information System (INIS)

Staat, M.

1996-01-01

It is shown that the difficulty for probabilistic fracture mechanics (PFM) is the general problem of the high reliability of a small population. There is no way around the problem as yet. Therefore what PFM can contribute to the reliability of steel pressure boundaries is demonstrated with the example of a typical reactor pressure vessel and critically discussed. Although no method is distinguishable that could give exact failure probabilities, PFM has several additional chances. Upper limits for failure probability may be obtained together with trends for design and operating conditions. Further, PFM can identify the most sensitive parameters, improved control of which would increase reliability. Thus PFM should play a vital role in the analysis of steel pressure boundaries despite all shortcomings. (author). 19 refs, 7 figs, 1 tab

Refining of raw materials, lignite present economic problems

Energy Technology Data Exchange (ETDEWEB)

Schirmer, G.

1985-06-01

East Germany seeks an economic intensification program that involves refining raw materials to a higher level. Lignite briquetting prior to liquefaction and gasification illustrates both the theoretical and practical aspects of that goal and also introduces questions of secure supplies. The author describes the special labor processes, use of technology, recycling of waste materials, and other new problems that the approach entails as the refined raw materials become new materials or energy sources. Economics based on the value of the refined product and the cost of the materials determine the degree of refinement. The concept also involves the relationship of producer and user as profits increase.

Physics. Examples and problems. Mechanics, heat, electricity and magnetism, oscillations and waves, atomic and nuclear physics; Physik. Beispiele und Aufgaben. Mechanik, Waermelehre, Elektrizitaet und Magnetismus, Schwingungen und Wellen, Atom- und Kernphysik

Energy Technology Data Exchange (ETDEWEB)

Stroppe, Heribert; Streitenberger, Peter; Specht, Eckard; Zeitler, Juergen; Langer, Heinz

2017-07-01

The present book is the unification of the proved problem collections for the basic physical training of studyings of especially engineering courses at technical colleges and universities. The book contains - didactically prepared and structured in the style of a textbook as well as with increasing difficulty - a total of 960 exemplary and additional tasks from the fields mechanics, heat, electricity and magnetism, oscillations and waves, as well as atomic and nuclear physics. For the exemplary problems the whole solution path and the complete calculation process with explanation of the relevant physical laws are extensively presented, for the additional problems for the self-control only the solutions and, if necessary, intermediate calculations are given. The examples and problems with mostly practice-oriented content are selected in such a way that they largely cover the matter treated in courses and exercises and make by their didactical preparation an effective repetition and optimal examination-preparation possible.

Mechanisms of Coronal Heating S. R. Verma

Indian Academy of Sciences (India)

Abstract. The Sun is a mysterious star. The high temperature of the chromosphere and corona present one of the most puzzling problems of solar physics. Observations show that the solar coronal heating problem is highly complex with many different facts. It is likely that different heating mechanisms are at work in solar ...

New Directions in Mathematical Fluid Mechanics

CERN Document Server

Fursikov, Andrei V

2010-01-01

The scientific interests of Professor A.V. Kazhikhov were fundamentally devoted to Mathematical Fluid Mechanics, where he achieved outstanding results that had, and still have, a significant influence on this field. This volume, dedicated to the memory of A.V. Kazhikhov, presents the latest contributions from renowned world specialists in a number of new important directions of Mathematical Physics, mostly of Mathematical Fluid Mechanics, and, more generally, in the field of nonlinear partial differential equations. These results are mostly related to boundary value problems and to control problems for the Navier-Stokes equations, and for equations of heat convection. Other important topics include non-equilibrium processes, Poisson-Boltzmann equations, dynamics of elastic body, and related problems of function theory and nonlinear analysis.

Foundations of mechanics

International Nuclear Information System (INIS)

Zorski, Henryk; Bazanski, Stanislaw; Gutowski, Roman; Slawianowski, Jan; Wilmanski, Krysztof; Wozniak, Czeslaw

1992-01-01

In the last 3 decades the field of mechanics has seen spectacular progress due to the demand for applications in problems of cosmology, thermonuclear fusion, metallurgy, etc. This book provides a broad and thorough overview on the foundations of mechanics. It discusses theoretical mechanics and continuum mechanics, as well as phenomenological thermodynamics, quantum mechanics and relativistic mechanics. Each chapter presents the basic physical facts of interest without going into details and derivations and without using advanced mathematical formalism. The first part constitutes a classical exposition of Lagrange's and Hamiltonian's analytical mechanics on which most of the continuum theory is based. The section on continuum mechanics focuses mainly on the axiomatic foundations, with many pointers for further research in this area. Special attention is given to modern continuum thermodynamics, both for the foundations and applications. A section on quantum mechanics is also included, since the phenomenological description of various quantum phenomena is becoming of increasing importance. refs.; figs.; tabs

DORT and TORT workshop -- Outline for presentation for performance issues for large problems

International Nuclear Information System (INIS)

Barnett, A.

1998-04-01

This paper addresses the problem of running large TORT programs. The problem being a limited amount of time per job and limited amount of memory and disk space. The solution that the author outlines here is to break up the TORT run in time and space. For the time problem run multiple, sequential, dependent jobs. For the space problem use TORT internal memory conservation features. TORT is a three-dimensional discrete ordinates neutron/photon transport code

Canonical transformations method in the potential scattering problem

International Nuclear Information System (INIS)

Pavlenko, Yu.G.

1984-01-01

Canonical formalism of the first order is used in the present paper to solve the problem of scattering and other problems of quantum mechanics. The theory of canonical transformations (CT) being the basis of hamiltonian approach permits to develop several methods of integration being beyond the scope of the standard theory of perturbations. In this case it is essential for numerical counting that the theory permits to obtain algorithm for plotting highest approximations

Problems in differential equations

CERN Document Server

Brenner, J L

2013-01-01

More than 900 problems and answers explore applications of differential equations to vibrations, electrical engineering, mechanics, and physics. Problem types include both routine and nonroutine, and stars indicate advanced problems. 1963 edition.

The mechanical problems on additive manufacturing of viscoelastic solids with integral conditions on a surface increasing in the growth process

Science.gov (United States)

Parshin, D. A.; Manzhirov, A. V.

2018-04-01

Quasistatic mechanical problems on additive manufacturing aging viscoelastic solids are investigated. The processes of piecewise-continuous accretion of such solids are considered. The consideration is carried out in the framework of linear mechanics of growing solids. A theorem about commutativity of the integration over an arbitrary surface increasing in the solid growing process and the time-derived integral operator of viscoelasticity with a limit depending on the solid point is proved. This theorem provides an efficient way to construct on the basis of Saint-Venant principle solutions of nonclassical boundary-value problems for describing the mechanical behaviour of additively formed solids with integral satisfaction of boundary conditions on the surfaces expanding due to the additional material influx to the formed solid. The constructed solutions will retrace the evolution of the stress-strain state of the solids under consideration during and after the processes of their additive formation. An example of applying the proved theorem is given.

Topological approximation methods for evolutionary problem of nonlinear hydrodynamics

CERN Document Server

Zvyagin, Victor

2008-01-01

The authors present functional analytical methods for solving a class of partial differential equations. The results have important applications to the numerical treatment of rheology (specific examples are the behaviour of blood or print colours) and to other applications in fluid mechanics. A class of methods for solving problems in hydrodynamics is presented.

Solid state mechanics

International Nuclear Information System (INIS)

Habib, P.

1988-01-01

The 1988 progress report of the Solid State Mechanics laboratory (Polytechnic School, France) is presented. The research program domains are the following: investigations concerning the stability and bifurcation of the reversible or irreversible mechanical systems, the problems related to the theoretical and experimental determination of the materials rheological properties, the fatigue crack formation and propagation in multiple-axial stress conditions, the expert systems, and the software applied in the reinforced earth structures dimensioning. Moreover, the published papers, the books, the congress communications, the thesis, and the patents are listed [fr

Local supersymmetry and the problem of the mass scales

International Nuclear Information System (INIS)

Nilles, H.P.

1983-02-01

Spontaneously broken supergravity might help us to understand the puzzle of the mass scales in grand unified models. We describe the general mechanism and point out the remaining problems. Some new results on local supercolor are presented

A Meshfree Cell-based Smoothed Point Interpolation Method for Solid Mechanics Problems

International Nuclear Information System (INIS)

Zhang Guiyong; Liu Guirong

2010-01-01

In the framework of a weakened weak (W 2 ) formulation using a generalized gradient smoothing operation, this paper introduces a novel meshfree cell-based smoothed point interpolation method (CS-PIM) for solid mechanics problems. The W 2 formulation seeks solutions from a normed G space which includes both continuous and discontinuous functions and allows the use of much more types of methods to create shape functions for numerical methods. When PIM shape functions are used, the functions constructed are in general not continuous over the entire problem domain and hence are not compatible. Such an interpolation is not in a traditional H 1 space, but in a G 1 space. By introducing the generalized gradient smoothing operation properly, the requirement on function is now further weakened upon the already weakened requirement for functions in a H 1 space and G 1 space can be viewed as a space of functions with weakened weak (W 2 ) requirement on continuity. The cell-based smoothed point interpolation method (CS-PIM) is formulated based on the W 2 formulation, in which displacement field is approximated using the PIM shape functions, which possess the Kronecker delta property facilitating the enforcement of essential boundary conditions [3]. The gradient (strain) field is constructed by the generalized gradient smoothing operation within the cell-based smoothing domains, which are exactly the triangular background cells. A W 2 formulation of generalized smoothed Galerkin (GS-Galerkin) weak form is used to derive the discretized system equations. It was found that the CS-PIM possesses the following attractive properties: (1) It is very easy to implement and works well with the simplest linear triangular mesh without introducing additional degrees of freedom; (2) it is at least linearly conforming; (3) this method is temporally stable and works well for dynamic analysis; (4) it possesses a close-to-exact stiffness, which is much softer than the overly-stiff FEM model and

Present status of seawater desalination and problems of nuclear utilization. Aiming at coping with global shortage of water

International Nuclear Information System (INIS)

2006-07-01

With recent global population increase and economic and life level improvement, water demand increases tremendously and in 2025 water scarcity will occur in almost the half of countries and regions in the world. Nuclear desalination is highly expected to cope with this issue. The Japan Atomic Industrial Forum (JAIF) established special committee on seawater desalination problems to discuss possibilities of nuclear desalination introduction. Present status of seawater desalination and problems of nuclear utilization were reviewed and the committee recommended the necessity of establishing medium and long-term plan on international business development of nuclear desalination and also the start of basic research on problems of nuclear utilization such as technical and institutional limits and efficient applicability of nuclear energy. (T. Tanaka)

Solution of certain problems in quantum mechanics

CERN Document Server

Bolotin, A; Raudeliunas, A

2018-01-01

Intended for advanced undergraduates and graduate students in mathematics, physics, and chemistry, this concise treatment demonstrates the theory of special functions' use and application to problems in atomic and molecular physics. 2017 edition.

Self-adjoint extensions and spectral analysis in the Calogero problem

Energy Technology Data Exchange (ETDEWEB)

Gitman, D M [Institute of Physics, University of Sao Paulo (Brazil); Tyutin, I V; Voronov, B L [Lebedev Physical Institute, Moscow (Russian Federation)], E-mail: gitman@dfn.if.usp.br, E-mail: tyutin@lpi.ru, E-mail: voronov@lpi.ru

2010-04-09

In this paper, we present a mathematically rigorous quantum-mechanical treatment of a one-dimensional motion of a particle in the Calogero potential {alpha}x{sup -2}. Although the problem is quite old and well studied, we believe that our consideration based on a uniform approach to constructing a correct quantum-mechanical description for systems with singular potentials and/or boundaries, proposed in our previous works, adds some new points to its solution. To demonstrate that a consideration of the Calogero problem requires mathematical accuracy, we discuss some 'paradoxes' inherent in the 'naive' quantum-mechanical treatment. Using a self-adjoint extension method, we construct and study all possible self-adjoint operators (self-adjoint Hamiltonians) associated with a formal differential expression for the Calogero Hamiltonian. In particular, we discuss a spontaneous scale-symmetry breaking associated with self-adjoint extensions. A complete spectral analysis of all self-adjoint Hamiltonians is presented.

Quantum mechanics II advanced topics

CERN Document Server

Rajasekar, S

2015-01-01

Quantum Mechanics II: Advanced Topics uses more than a decade of research and the authors’ own teaching experience to expound on some of the more advanced topics and current research in quantum mechanics. A follow-up to the authors introductory book Quantum Mechanics I: The Fundamentals, this book begins with a chapter on quantum field theory, and goes on to present basic principles, key features, and applications. It outlines recent quantum technologies and phenomena, and introduces growing topics of interest in quantum mechanics. The authors describe promising applications that include ghost imaging, detection of weak amplitude objects, entangled two-photon microscopy, detection of small displacements, lithography, metrology, and teleportation of optical images. They also present worked-out examples and provide numerous problems at the end of each chapter.

Topology optimization of vibration and wave propagation problems

DEFF Research Database (Denmark)

Jensen, Jakob Søndergaard

2007-01-01

The method of topology optimization is a versatile method to determine optimal material layouts in mechanical structures. The method relies on, in principle, unlimited design freedom that can be used to design materials, structures and devices with significantly improved performance and sometimes...... novel functionality. This paper addresses basic issues in simulation and topology design of vibration and wave propagation problems. Steady-state and transient wave propagation problems are addressed and application examples for both cases are presented....

Present status and problems of radionuclide studies in emergency cases

International Nuclear Information System (INIS)

Ogawa, Kiyoshi

1983-01-01

Scintigraphy is just right for diagnosing emergency cases due to its noninvasive and simple method, but emergency radionuclide studies have not become practical as a result of difficulty problems. Recently, nuclear medical devices have become easier to use in operations. It is become of this, that I have submitted this report regarding the problems of radionuclide studies in emergency cases. There were 101 cases (1.4 %) out of 7,310 cases for the year period Sept. 1981 - Aug. 1982. The studies consisted of 12 brain imaging cases, 9 plumonary imaging cases, 22 cardiac study cases (cardio-angiography cases 8, 99m-Tc-PYP myocardium imaging cases 12, 201-Tl myocardium imaging cases 2), 12 renal study cases, 11 G.I. blood loss cases, 35 peripheral angiography cases. In the near future, we will have to be ready to perform emergency radionuclide studies if the need arises. (author)

Emotion Oriented Programming: Computational Abstractions for AI Problem Solving

OpenAIRE

Darty , Kevin; Sabouret , Nicolas

2012-01-01

International audience; In this paper, we present a programming paradigm for AI problem solving based on computational concepts drawn from Affective Computing. It is believed that emotions participate in human adaptability and reactivity, in behaviour selection and in complex and dynamic environments. We propose to define a mechanism inspired from this observation for general AI problem solving. To this purpose, we synthesize emotions as programming abstractions that represent the perception ...

Youth Versus Adult “Weightlifting” Injuries Presenting to United States Emergency Rooms: Accidental Versus Nonaccidental Injury Mechanisms

OpenAIRE

Myer, Gregory D.; Quatman, Carmen E.; Khoury, Jane; Wall, Eric J.; Hewett, Timothy E.

2009-01-01

Myer, GD, Quatman, CE, Khoury, J, Wall, EJ, and Hewett, TE. Youth versus adult “weightlifting” injuries presenting to united states emergency rooms: accidental versus nonaccidental injury mechanisms. J Strength Cond Res 23(7): 2054–2060, 2009—Resistance training has previously been purported to be unsafe and ineffective in children. The purpose of this investigation was to evaluate resistance training-related injuries presenting to U.S. emergency rooms by age, type, and mechanism of injury. W...

An Autograding (Student) Problem Management System for the Compeuwtir Ilittur8

Science.gov (United States)

Kohne, Glenn S.

1996-01-01

In order to develop analysis skills necessary in engineering disciplines, students need practice solving problems using specified analytical techniques. Unless homework is collected and graded, students tend not to spend much time or effort in performing it. Teachers do not, realistically, have the time to grade large numbers of homework problems on a regular basis. This paper presents and makes available a miracle cure. The Autograding Problem Management System (APMS) provides a discipline-independent mechanism for teachers to create (quickly and easily) sets of homework problems. The APMS system provides CRT and/or printed summaries of the graded student responses. This presentation will demonstrate both the speed and the drag-and-drop simplicity of using the APMS to create self-grading homework problem sets comprised of traditional types of problems and of problems which would not be possible without the use of computers.

Performance of mixed formulations for the particle finite element method in soil mechanics problems

Science.gov (United States)

Monforte, Lluís; Carbonell, Josep Maria; Arroyo, Marcos; Gens, Antonio

2017-07-01

This paper presents a computational framework for the numerical analysis of fluid-saturated porous media at large strains. The proposal relies, on one hand, on the particle finite element method (PFEM), known for its capability to tackle large deformations and rapid changing boundaries, and, on the other hand, on constitutive descriptions well established in current geotechnical analyses (Darcy's law; Modified Cam Clay; Houlsby hyperelasticity). An important feature of this kind of problem is that incompressibility may arise either from undrained conditions or as a consequence of material behaviour; incompressibility may lead to volumetric locking of the low-order elements that are typically used in PFEM. In this work, two different three-field mixed formulations for the coupled hydromechanical problem are presented, in which either the effective pressure or the Jacobian are considered as nodal variables, in addition to the solid skeleton displacement and water pressure. Additionally, several mixed formulations are described for the simplified single-phase problem due to its formal similitude to the poromechanical case and its relevance in geotechnics, since it may approximate the saturated soil behaviour under undrained conditions. In order to use equal-order interpolants in displacements and scalar fields, stabilization techniques are used in the mass conservation equation of the biphasic medium and in the rest of scalar equations. Finally, all mixed formulations are assessed in some benchmark problems and their performances are compared. It is found that mixed formulations that have the Jacobian as a nodal variable perform better.

The mathematics and mechanics of biological growth

CERN Document Server

Goriely, Alain

2017-01-01

This monograph presents a general mechanical theory for biological growth. It provides both a conceptual and a technical foundation for the understanding and analysis of problems arising in biology and physiology. The theory and methods is illustrated on a wide range of examples and applications. A process of extreme complexity, growth plays a fundamental role in many biological processes and is considered to be the hallmark of life itself. Its description has been one of the fundamental problems of life sciences, but until recently, it has not attracted much attention from mathematicians, physicists, and engineers. The author herein presents the first major technical monograph on the problem of growth since D’Arcy Wentworth Thompson’s 1917 book On Growth and Form. The emphasis of the book is on the proper mathematical formulation of growth kinematics and mechanics. Accordingly, the discussion proceeds in order of complexity and the book is divided into five parts. First, a general introduction on the pro...

Physics of continuous media problems and solutions in electromagnetism, fluid mechanics and MHD

CERN Document Server

Vekstein, Grigory

2013-01-01

This book presents an excellent and exemplary collection of up-to-date exercises and their solutions on continuous media, covering a wide range of topics from electro-, magnetohydro- and fluid dynamics, and from the theory of elasticity. The author is an international expert with many years of research and teaching experience in the field. Each chapter begins with a comprehensive summary of definitions and the mathematical description of the physical laws necessary to understand and solve the series of problems that follow. The problems and exercises are a gradual built up in each of the topics and they introduce the reader step by step into the principles of the subject. The solutions are well explained and detailed with additional readings when necessary. This exercise book is written in a true scholarly manner that allows the reader to understand the basic principles and physical laws of continuous media. This problem-solving book is highly recommended to graduate and postgraduate students, postdoctoral re...

Are parental ADHD problems associated with a more severe clinical presentation and greater family adversity in children with ADHD?

OpenAIRE

Agha, Sharifah Shameem; Zammit, Stanley; Thapar, Anita; Langley, Kate

2013-01-01

Although Attention Deficit Hyperactivity Disorder (ADHD) is recognised to be a familial and heritable disorder, little is known about the broader family characteristics of having a parent with ADHD problems. The main aim of this study was to investigate the relationship between parent ADHD problems, child clinical presentation and family functioning in a sample of children with ADHD. The sample consisted of 570 children with ADHD. Child psychopathology was assessed using a semi-structured dia...

Continuum mechanics using Mathematica fundamentals, methods, and applications

CERN Document Server

Romano, Antonio

2014-01-01

This textbook's methodological approach familiarizes readers with the mathematical tools required to correctly define and solve problems in continuum mechanics. Covering essential principles and fundamental applications, this second edition of Continuum Mechanics using Mathematica® provides a solid basis for a deeper study of more challenging and specialized problems related to nonlinear elasticity, polar continua, mixtures, piezoelectricity, ferroelectricity, magneto-fluid mechanics, and state changes (see A. Romano, A. Marasco, Continuum Mechanics: Advanced Topics and Research Trends, Springer (Birkhäuser), 2010, ISBN 978-0-8176-4869-5). Key topics and features: * Concise presentation strikes a balance between fundamentals and applications * Requisite mathematical background carefully collected in two introductory chapters and one appendix * Recent developments highlighted through coverage of more significant applications to areas such as wave propagation, fluid mechanics, porous media, linear elasticity....

On Wigner's problem, computability theory, and the definition of life

International Nuclear Information System (INIS)

Swain, J.

1998-01-01

In 1961, Eugene Wigner presented a clever argument that in a world which is adequately described by quantum mechanics, self-reproducing systems in general, and perhaps life in particular, would be incredibly improbable. The problem and some attempts at its solution are examined, and a new solution is presented based on computability theory. In particular, it is shown that computability theory provides limits on what can be known about a system in addition to those which arise from quantum mechanics. (author)

Contact geometry and quantum mechanics

Science.gov (United States)

Herczeg, Gabriel; Waldron, Andrew

2018-06-01

We present a generally covariant approach to quantum mechanics in which generalized positions, momenta and time variables are treated as coordinates on a fundamental "phase-spacetime". We show that this covariant starting point makes quantization into a purely geometric flatness condition. This makes quantum mechanics purely geometric, and possibly even topological. Our approach is especially useful for time-dependent problems and systems subject to ambiguities in choices of clock or observer. As a byproduct, we give a derivation and generalization of the Wigner functions of standard quantum mechanics.

A statistical mechanics approach to mixing in stratified fluids

OpenAIRE

Venaille , Antoine; Gostiaux , Louis; Sommeria , Joël

2016-01-01

Accepted for the Journal of Fluid Mechanics; Predicting how much mixing occurs when a given amount of energy is injected into a Boussinesq fluid is a longstanding problem in stratified turbulence. The huge number of degrees of freedom involved in these processes renders extremely difficult a deterministic approach to the problem. Here we present a statistical mechanics approach yielding a prediction for a cumulative, global mixing efficiency as a function of a global Richard-son number and th...

Wormholes and the cosmological constant problem.

Science.gov (United States)

Klebanov, I.

The author reviews the cosmological constant problem and the recently proposed wormhole mechanism for its solution. Summation over wormholes in the Euclidean path integral for gravity turns all the coupling parameters into dynamical variables, sampled from a probability distribution. A formal saddle point analysis results in a distribution with a sharp peak at the cosmological constant equal to zero, which appears to solve the cosmological constant problem. He discusses the instabilities of the gravitational Euclidean path integral and the difficulties with its interpretation. He presents an alternate formalism for baby universes, based on the "third quantization" of the Wheeler-De Witt equation. This approach is analyzed in a minisuperspace model for quantum gravity, where it reduces to simple quantum mechanics. Once again, the coupling parameters become dynamical. Unfortunately, the a priori probability distribution for the cosmological constant and other parameters is typically a smooth function, with no sharp peaks.

Network Analysis of Students' Use of Representations in Problem Solving

Science.gov (United States)

McPadden, Daryl; Brewe, Eric

2016-03-01

We present the preliminary results of a study on student use of representations in problem solving within the Modeling Instruction - Electricity and Magnetism (MI-E&M) course. Representational competence is a critical skill needed for students to develop a sophisticated understanding of college science topics and to succeed in their science courses. In this study, 70 students from the MI-E&M, calculus-based course were given a survey of 25 physics problem statements both pre- and post- instruction, covering both Newtonian Mechanics and Electricity and Magnetism (E&M). For each problem statement, students were asked which representations they would use in that given situation. We analyze the survey results through network analysis, identifying which representations are linked together in which contexts. We also compare the representation networks for those students who had already taken the first-semester Modeling Instruction Mechanics course and those students who had taken a non-Modeling Mechanics course.

Could HPS Improve Problem-Solving?

Science.gov (United States)

Coelho, Ricardo Lopes

2013-05-01

It is generally accepted nowadays that History and Philosophy of Science (HPS) is useful in understanding scientific concepts, theories and even some experiments. Problem-solving strategies are a significant topic, since students' careers depend on their skill to solve problems. These are the reasons for addressing the question of whether problem solving could be improved by means of HPS. Three typical problems in introductory courses of mechanics—the inclined plane, the simple pendulum and the Atwood machine—are taken as the object of the present study. The solving strategies of these problems in the eighteenth and nineteenth century constitute the historical component of the study. Its philosophical component stems from the foundations of mechanics research literature. The use of HPS leads us to see those problems in a different way. These different ways can be tested, for which experiments are proposed. The traditional solving strategies for the incline and pendulum problems are adequate for some situations but not in general. The recourse to apparent weights in the Atwood machine problem leads us to a new insight and a solving strategy for composed Atwood machines. Educational implications also concern the development of logical thinking by means of the variety of lines of thought provided by HPS.

Mechanics and thermodynamics

CERN Document Server

Demtröder, Wolfgang

2017-01-01

This introduction to classical mechanics and thermodynamics provides an accessible and clear treatment of the fundamentals. Starting with particle mechanics and an early introduction to special relativity this textbooks enables the reader to understand the basics in mechanics. The text is written from the experimental physics point of view, giving numerous real life examples and applications of classical mechanics in technology. This highly motivating presentation deepens the knowledge in a very accessible way. The second part of the text gives a concise introduction to rotational motion, an expansion to rigid bodies, fluids and gases. Finally, an extensive chapter on thermodynamics and a short introduction to nonlinear dynamics with some instructive examples intensify the knowledge of more advanced topics. Numerous problems with detailed solutions are perfect for self study.

The characteristics of mechanical engineering systems

CERN Document Server

Holmes, R

1977-01-01

The Characteristics of Mechanical Engineering Systems focuses on the characteristics that must be considered when designing a mechanical engineering system. Mechanical systems are presented on the basis of component input-output relationships, paying particular attention to lumped-parameter problems and the interrelationships between lumped components or """"black-boxes"""" in an engineering system. Electric motors and generators are treated in an elementary manner, and the principles involved are explained as far as possible from physical and qualitative reasoning. This book is comprised of

TRANSITION OF BULGARIAN AGRICULTURE: PRESENT SITUATION, PROBLEMS AND PERSPECTIVES FOR DEVELOPMENT

Directory of Open Access Journals (Sweden)

Nelly BENCHEVA

2006-07-01

Full Text Available The characteristics of the agrarian reform, the problems and results of the restructuring of Bulgarian agriculture during the transition period, also the impact of the European Common Agricultural Policy (CAP on overall policies in the period of preparation for accession to the EU have been reviewed in this article. The analysis demonstrates that the problems of restructuring of agriculture in Bulgaria are more specifi c compared to those of the other Central and West European countries. They can be solved through a sound comprehensive analysis of the economic, fi nancial, organizational, demographic, psychological and political factors in the context of CAP.

Introduction to continuum mechanics

CERN Document Server

Lai, W Michael; Rubin, David

1996-01-01

Introduction to Continuum Mechanics is a recently updated and revised text which is perfect for either introductory courses in an undergraduate engineering curriculum or for a beginning graduate course.Continuum Mechanics studies the response of materials to different loading conditions. The concept of tensors is introduced through the idea of linear transformation in a self-contained chapter, and the interrelation of direct notation, indicial notation, and matrix operations is clearly presented. A wide range of idealized materials are considered through simple static and dynamic problems, a

Impact Mechanics

Science.gov (United States)

Stronge, W. J.

2004-03-01

Impact mechanics is concerned with the reaction forces that develop during a collision and the dynamic response of structures to these reaction forces. The subject has a wide range of engineering applications, from designing sports equipment to improving the crashworthiness of automobiles. This book develops several different methodologies for analysing collisions between structures. These range from rigid body theory for structures that are stiff and compact, to vibration and wave analyses for flexible structures. The emphasis is on low-speed impact where damage is local to the small region of contact between the colliding bodies. The analytical methods presented give results that are more robust or less sensitive to initial conditions than have been achieved hitherto. As a text, Impact Mechanics builds upon foundation courses in dynamics and strength of materials. It includes numerous industrially relevant examples and end-of-chapter homework problems drawn from industry and sports. Practising engineers will also find the methods presented in this book useful in calculating the response of a mechanical system to impact.

Organization and diffusion in biological and material fabrication problems

OpenAIRE

Mangan, Niall Mari

2013-01-01

This thesis is composed of two problems. The first is a systems level analysis of the carbon concentrating mechanism in cyanobacteria. The second presents a theoretical analysis of femtosecond laser melting for the purpose of hyperdoping silicon with sulfur. While these systems are very distant, they are both relevant to the development of alternative energy (production of biofuels and methods for fabricating photovoltaics respectively). Both problems are approached through analysis of the un...

Chaotic mechanics in systems with impacts and friction

CERN Document Server

Blazejczyk-Okolewska, Barbara; Kapitaniak, Tomasz; Wojewoda, Jerzy

1999-01-01

This book is devoted to the theory of chaotic oscillations in mechanical systems. Detailed descriptions of the basic types of nonlinearity - impacts and dry friction - are presented. The properties of such behavior are discussed, and the numerical and experimental results obtained by the authors are presented.The dynamic properties of systems described here can be useful in the proper design and use of mechanics where such behavior still creates problems.This book will be very useful for anyone with a fundamental knowledge of nonlinear mechanics who is beginning research in the field.

Mechanism of indictment. Problems, theory and practice

Directory of Open Access Journals (Sweden)

Timur A. Gumerov

2017-03-01

Full Text Available Objective to determine the stages of the mechanism of pretrial adoption of indictment to identify the main mistakes made when making an indictment and offer ways of their elimination. Methods logical comparativelegal normativelogical and statistical as well as the method of complex study of phenomena and processes of legal reality. Results within the framework of the proposed mechanism of prejudicial indictment adoption and basing on the analysis of 45 indictments and their receipts in various categories of cases the common errors were identified of the subjects of criminal procedural law involved in the mechanism of indictment preparation and adoption. These include the presence of smudges underlined places and erasures in the text of the indictment the discrepancy between the indictment and the charges set out in the resolution on impleading of a defendant confusion referred to the approval of the indictment by the head of the investigative body etc. Therefore it is proposed to supplement Part 1 of Article 39 of the Russian CriminalProcedural Code with paragraph 9.1. quotTo agree on the indictment after its signing by the investigatorquot to extend the term of preliminary investigation and to assign additional days for the indictment approval to put into practice the meeting of all actors of the criminal process involved in the mechanism of the indictment adoption in order to analyze the quality and completeness of the investigation typical investigation errors and violations of criminalprocedural legislation. Scientific novelty as a result of the study frequent errors arising from the adoption of the indictment were identified occurring since the end of the preliminary investigation with indictment till the adoption of the criminal case with the indictment by the court suggestions on avoiding them were formulated. Practical significance the main provisions and conclusions of the article can be used in scientific and teaching activities in

A relational solution to the problem of time in quantum mechanics and quantum gravity: a fundamental mechanism for quantum decoherence

International Nuclear Information System (INIS)

Gambini, Rodolfo; Porto, Rafael A; Pullin, Jorge

2004-01-01

The use of a relational time in quantum mechanics is a framework in which one promotes to quantum operators all variables in a system, and later chooses one of the variables to operate like a 'clock'. Conditional probabilities are computed for variables of the system to take certain values when the 'clock' specifies a certain time. This framework is attractive in contexts where the assumption of usual quantum mechanics of the existence of an external, perfectly classical clock, appears unnatural, as in quantum cosmology. Until recently, there were problems with such constructions in ordinary quantum mechanics with additional difficulties in the context of constrained theories like general relativity. A scheme we recently introduced to consistently discretize general relativity removed such obstacles. Since the clock is now an object subject to quantum fluctuations, the resulting evolution in time is not exactly unitary and pure states decohere into mixed states. Here we work out in detail the type of decoherence generated, and we find it to be of Lindblad type. This is attractive since it implies that one can have loss of coherence without violating the conservation of energy. We apply the framework to a simple cosmological model to illustrate how a quantitative estimate of the effect could be computed. For most quantum systems it appears to be too small to be observed, although certain macroscopic quantum systems could in the future provide a testing ground for experimental observation

Finite approximations in fluid mechanics

International Nuclear Information System (INIS)

Hirschel, E.H.

1986-01-01

This book contains twenty papers on work which was conducted between 1983 and 1985 in the Priority Research Program ''Finite Approximations in Fluid Mechanics'' of the German Research Society (Deutsche Forschungsgemeinschaft). Scientists from numerical mathematics, fluid mechanics, and aerodynamics present their research on boundary-element methods, factorization methods, higher-order panel methods, multigrid methods for elliptical and parabolic problems, two-step schemes for the Euler equations, etc. Applications are made to channel flows, gas dynamical problems, large eddy simulation of turbulence, non-Newtonian flow, turbomachine flow, zonal solutions for viscous flow problems, etc. The contents include: multigrid methods for problems from fluid dynamics, development of a 2D-Transonic Potential Flow Solver; a boundary element spectral method for nonstationary viscous flows in 3 dimensions; navier-stokes computations of two-dimensional laminar flows in a channel with a backward facing step; calculations and experimental investigations of the laminar unsteady flow in a pipe expansion; calculation of the flow-field caused by shock wave and deflagration interaction; a multi-level discretization and solution method for potential flow problems in three dimensions; solutions of the conservation equations with the approximate factorization method; inviscid and viscous flow through rotating meridional contours; zonal solutions for viscous flow problems

Some critical considerations on the present epistemological and scientific debate on quantum mechanics

International Nuclear Information System (INIS)

Ghirardi, G.C.

1985-09-01

Some general methodological considerations aimed to guarantee the necessary logical rigor to the present debate on quantum mechanics are presented. In particular some misunderstandings about the implications of the critical analysis put forward by Einstein, Podolsky and Rosen (EPR) which can be found in the literature, are discussed. These misunderstandings are shown to arise from possible underestimates, overestimates and misinterpretations of the EPR argument. It is argued that the difficulties pointed out by EPR are, in a sense that will be defined precisely, unavoidable. A model which tries to solve the difficulties arising from quantum non separability effects when macroscopic systems are involved, is briefly sketched. (author)

Drawing helps children to talk about their presenting problems during a mental health assessment.

Science.gov (United States)

Woolford, Junie; Patterson, Tess; Macleod, Emily; Hobbs, Linda; Hayne, Harlene

2015-01-01

When children require mental health services, clinicians need to conduct assessments that are developmentally sensitive and that include the child's point of view. Drawing is a popular tool that is commonly used in clinical settings. Research on drawing in experimental settings has confirmed that the opportunity to draw while talking increases the amount of verbal information that children report during an interview. The present research examined whether drawing also facilitates children's self reports during a mental health assessment. A total of 33 5-12-year-old children were asked either to draw and tell about their presenting problem or to tell only. Children who drew and told provided twice as much verbal information as children who told only. Further, interviewers in the draw and tell condition used a greater number of minimal responses than did interviewers in the tell only condition. These data have important implications for clinical practice. © The Author(s) 2013.

Quality of Work Life: Theoretical and Methodological Problems, and Presentation of a New Model and Measuring Instrument

Science.gov (United States)

Martel, Jean-Pierre; Dupuis, Gilles

2006-01-01

Purpose: Ever since the concept of Quality of Work Life (QWL) was first used over 30 years ago, a range of definitions and theoretical constructs have succeeded each other with the aim of mitigating the many problems facing the concept. A historical overview of the concept of QWL is presented here. Given the lack of consensus concerning the…

The reality problem in quantum mechanics

International Nuclear Information System (INIS)

Flamm, D.

1988-01-01

A series of 12 lectures on quantum mechanics and its inter-pretations: The more specific part begins with chapter 8: spin and polarization measurements; the Einstein-Podolski-Rosen paradoxon; Bell's inequations; interpretations of quantum theory; the role of the observer and the wave function of the world. 40 refs., 11 figs. (qui)

Temporal shifts in clinical presentation and underlying mechanisms of atherosclerotic disease.

Science.gov (United States)

Pasterkamp, Gerard; den Ruijter, Hester M; Libby, Peter

2017-01-01

The concept of the 'vulnerable plaque' originated from pathological observations in patients who died from acute coronary syndrome. This recognition spawned a generation of research that led to greater understanding of how complicated atherosclerotic plaques form and precipitate thrombotic events. In current practice, an increasing number of patients who survive their first event present with non-ST-segment elevation myocardial infarction (NSTEMI) rather than myocardial infarction (MI) with ST-segment elevation (STEMI). The culprit lesions that provide the pathological substrate for NSTEMI can vary considerably from the so-called 'vulnerable plaque'. The shift in clinical presentation of MI and stroke corresponds temporally to a progressive change in the characteristics of human plaques away from the supposed characteristics of vulnerability. These alterations in the structure and function of human atherosclerotic lesions might mirror the modifications that are produced in experimental plaques by lipid lowering, inspired by the vulnerable plaque construct. The shift in the clinical presentations of the acute coronary syndromes mandates a critical reassessment of the underlying mechanisms, proposed risk scores, the results and interpretation of preclinical experiments, as well as recognition of the limitations of the use of population data and samples collected before the application of current preventive interventions.

The genesis of fluid mechanics, 1640-1780

CERN Document Server

Calero, Julián Simón

2008-01-01

Fluid Mechanics, as a scientific discipline in a modern sense, was established between the last third of the 17th century and the first half of the 18th one. This book analyses its genesis, following its evolution along two basic lines of research, which have been named the "problem of resistance" and the "problem of discharge". This approach highlights the existence of a remarkable experimental aspect in the aforementioned research lines, together with their link with problems of a practical nature, such as ballistics, hydraulics, fluid-using machines or naval theory. On the other hand, although previous studies usually present fluid mechanics from the point of view of mathematics, this is complemented here by an engineering viewpoint; gathering attempts made in the beginnings of fluid mechanics to see if the theory was capable of productive application in practical terms. This is nothing unusual in a time where the quality of knowledge and skill is measured largely by its usefulness. (c) Universidad Naciona...

Mechanical Design of Spacecraft

Science.gov (United States)

1962-01-01

In the spring of 1962, engineers from the Engineering Mechanics Division of the Jet Propulsion Laboratory gave a series of lectures on spacecraft design at the Engineering Design seminars conducted at the California Institute of Technology. Several of these lectures were subsequently given at Stanford University as part of the Space Technology seminar series sponsored by the Department of Aeronautics and Astronautics. Presented here are notes taken from these lectures. The lectures were conceived with the intent of providing the audience with a glimpse of the activities of a few mechanical engineers who are involved in designing, building, and testing spacecraft. Engineering courses generally consist of heavily idealized problems in order to allow the more efficient teaching of mathematical technique. Students, therefore, receive a somewhat limited exposure to actual engineering problems, which are typified by more unknowns than equations. For this reason it was considered valuable to demonstrate some of the problems faced by spacecraft designers, the processes used to arrive at solutions, and the interactions between the engineer and the remainder of the organization in which he is constrained to operate. These lecture notes are not so much a compilation of sophisticated techniques of analysis as they are a collection of examples of spacecraft hardware and associated problems. They will be of interest not so much to the experienced spacecraft designer as to those who wonder what part the mechanical engineer plays in an effort such as the exploration of space.

Maytenus erythroxylon Reissek (Celastraceae) ethanol extract presents antidiarrheal activity via antimotility and antisecretory mechanisms.

Science.gov (United States)

Formiga, Rodrigo de Oliveira; Quirino, Zelma Glebya Maciel; Diniz, Margareth de Fátima Formiga Melo; Marinho, Alexsandro Fernandes; Tavares, Josean Fechine; Batista, Leônia Maria

2017-06-28

To investigate the acute toxicity, phytochemical profile, antidiarrheal activity and mechanisms of action of Maytenus erythroxylon ( M. erythroxylon ) ethanol extract. A castor oil-induced diarrhea model was used to evaluate antidiarrheal activity. Intestinal transit and gastric emptying protocols were used to evaluate a possible antimotility effect. K ATP channels, nitric oxide, presynaptic α2-adrenergic and tissue adrenergic receptors were investigated to uncover antimotility mechanisms of action and castor oil-induced enteropooling to elucidate antisecretory mechanisms. All tested doses of the extract (62.5, 125, 250 and 500 mg/kg) possessed antidiarrheal activity, with a significant decrease of the evacuation index. This activity is possibly related to a reduced gastric emptying (125, 250 and 500 mg/kg) and to a decreased percentage of intestinal transit for all tested doses. That last effect seems to be modulated by nitric oxide, K ATP channels and tissue adrenergic receptors. Besides, the extract also presented antisecretory effect due to a decrease of intestinal fluid accumulation. The antidiarrheal effect of M. erythroxylon found in this study involves antimotility and antisecretory mechanisms that may be attributed to the chemical compounds found in this species: saponins, flavonoids, tannins, triterpenes and steroids.

Maytenus erythroxylon Reissek (Celastraceae) ethanol extract presents antidiarrheal activity via antimotility and antisecretory mechanisms

Science.gov (United States)

Formiga, Rodrigo de Oliveira; Quirino, Zelma Glebya Maciel; Diniz, Margareth de Fátima Formiga Melo; Marinho, Alexsandro Fernandes; Tavares, Josean Fechine; Batista, Leônia Maria

2017-01-01

AIM To investigate the acute toxicity, phytochemical profile, antidiarrheal activity and mechanisms of action of Maytenus erythroxylon (M. erythroxylon) ethanol extract. METHODS A castor oil-induced diarrhea model was used to evaluate antidiarrheal activity. Intestinal transit and gastric emptying protocols were used to evaluate a possible antimotility effect. KATP channels, nitric oxide, presynaptic α2-adrenergic and tissue adrenergic receptors were investigated to uncover antimotility mechanisms of action and castor oil-induced enteropooling to elucidate antisecretory mechanisms. RESULTS All tested doses of the extract (62.5, 125, 250 and 500 mg/kg) possessed antidiarrheal activity, with a significant decrease of the evacuation index. This activity is possibly related to a reduced gastric emptying (125, 250 and 500 mg/kg) and to a decreased percentage of intestinal transit for all tested doses. That last effect seems to be modulated by nitric oxide, KATP channels and tissue adrenergic receptors. Besides, the extract also presented antisecretory effect due to a decrease of intestinal fluid accumulation. CONCLUSION The antidiarrheal effect of M. erythroxylon found in this study involves antimotility and antisecretory mechanisms that may be attributed to the chemical compounds found in this species: saponins, flavonoids, tannins, triterpenes and steroids. PMID:28706420

Type D personality in the general population: a systematic review of health status, mechanisms of disease, and work-related problems

Directory of Open Access Journals (Sweden)

Denollet Johan

2010-01-01

Full Text Available Abstract Background The objective was to review all available literature concerning Type D (distressed personality among the general population and to discuss its implications for research on health status, disease-promoting mechanisms and work-related problems in non-clinical populations. Methods A computerized search of the literature was performed independently and in duplicate by both investigators on December 21st, 2009. Published research reports were included if they studied Type D personality among the general population. Nineteen articles were selected and they were subjected to an 11-item standardised quality checklist by both investigators. Results The methodological quality of the selected studies was adequate to high. The studies included in this review showed that the presence of Type D characteristics had a negative impact on mental health status (more symptoms of depression, anxiety, post-traumatic stress disorder, mental distress, passive coping, and less social support and physical health status (more somatic complaints, lower health status, more influenza-like illness reporting. Other studies reported on behavioral and biological mechanisms of disease in apparently healthy individuals with a Type D personality. Finally, some studies also showed a negative effect of Type D personality on work-related problems (higher absence-leave, higher levels of vital exhaustion and burnout, and more work-related stress. Conclusions Type D personality is a vulnerability factor for general psychological distress that affects mental and physical health status and is associated with disease-promoting mechanisms and work-related problems in apparently healthy individuals.

Disgust and sexual problems : Theoretical conceptualization and case illustrations

NARCIS (Netherlands)

de Jong, Peter J.; van Lankveld, Jacques; Elgersma, Hermien J.; Borg, Charmaine

There is increasing consensus that the present DSM IV-TR (2000) sexual disorders classification, of desire, arousal, orgasm, and pain is unsatisfactory. This differentiation seems neither adequate as a lead for understanding the mechanisms involved in these sexual problems nor appropriate as a guide

A problem with problem solving: motivational traits, but not cognition, predict success on novel operant foraging tasks.

Science.gov (United States)

van Horik, Jayden O; Madden, Joah R

2016-04-01

Rates of innovative foraging behaviours and success on problem-solving tasks are often used to assay differences in cognition, both within and across species. Yet the cognitive features of some problem-solving tasks can be unclear. As such, explanations that attribute cognitive mechanisms to individual variation in problem-solving performance have revealed conflicting results. We investigated individual consistency in problem-solving performances in captive-reared pheasant chicks, Phasianus colchicus , and addressed whether success depends on cognitive processes, such as trial-and-error associative learning, or whether performances may be driven solely via noncognitive motivational mechanisms, revealed through subjects' willingness to approach, engage with and persist in their interactions with an apparatus, or via physiological traits such as body condition. While subjects' participation and success were consistent within the same problems and across similar tasks, their performances were inconsistent across different types of task. Moreover, subjects' latencies to approach each test apparatus and their attempts to access the reward were not repeatable across trials. Successful individuals did not improve their performances with experience, nor were they consistent in their techniques in repeated presentations of a task. However, individuals that were highly motivated to enter the experimental chamber were more likely to participate. Successful individuals were also faster to approach each test apparatus and more persistent in their attempts to solve the tasks than unsuccessful individuals. Our findings therefore suggest that individual differences in problem-solving success can arise from inherent motivational differences alone and hence be achieved without inferring more complex cognitive processes.

A primer of analytical mechanics

CERN Document Server

Strocchi, Franco

2018-01-01

This book presents the basic elements of Analytical Mechanics, starting from the physical motivations that favor it with respect to the Newtonian Mechanics in Cartesian coordinates. Rather than presenting Analytical Mechanics mainly as a formal development of Newtonian Mechanics, it highlights its effectiveness due to the following five important achievements: 1) the most economical description of time evolution in terms of the minimal set of coordinates, so that there are no constraint forces in their evolution equations; 2) the form invariance of the evolution equations, which automatically solves the problem of fictitious forces; 3) only one scalar function encodes the formulation of the dynamics, rather than the full set of vectors which describe the forces in Cartesian Newtonian Mechanics; 4) in the Hamiltonian formulation, the corresponding evolution equations are of first order in time and are fully governed by the Hamiltonian function (usually corresponding to the energy); 5) the emergence of the Hami...

Mechanical Systems, Classical Models

CERN Document Server

Teodorescu, Petre P

2009-01-01

This third volume completes the Work Mechanical Systems, Classical Models. The first two volumes dealt with particle dynamics and with discrete and continuous mechanical systems. The present volume studies analytical mechanics. Topics like Lagrangian and Hamiltonian mechanics, the Hamilton-Jacobi method, and a study of systems with separate variables are thoroughly discussed. Also included are variational principles and canonical transformations, integral invariants and exterior differential calculus, and particular attention is given to non-holonomic mechanical systems. The author explains in detail all important aspects of the science of mechanics, regarded as a natural science, and shows how they are useful in understanding important natural phenomena and solving problems of interest in applied and engineering sciences. Professor Teodorescu has spent more than fifty years as a Professor of Mechanics at the University of Bucharest and this book relies on the extensive literature on the subject as well as th...

Three-dimensional problems in the theory of cracks

International Nuclear Information System (INIS)

Panasyuk, V.V.; Andrejkiv, A.E.; Stadnik, M.M.

1979-01-01

Review of the main mechanical conceptions and mathematic methods, used in solving of spatial problems of the theory of cracks is given. At that, cases of effects upon a body of force static and cyclic and geometrically variable temperature fields are considered. The main calculation models of the theory of cracks are characterized in detail. Other models, derived from these ones and used in solving the above problems are also mentioned. Analysis and synthesis of the most general mathematic methods of solving three-dimensional problems of the theory of cracks are made. Besides precise methods, approximate ones are also presented, being efficient enough in engineering practice

Annotations to quantum statistical mechanics

CERN Document Server

Kim, In-Gee

2018-01-01

This book is a rewritten and annotated version of Leo P. Kadanoff and Gordon Baym’s lectures that were presented in the book Quantum Statistical Mechanics: Green’s Function Methods in Equilibrium and Nonequilibrium Problems. The lectures were devoted to a discussion on the use of thermodynamic Green’s functions in describing the properties of many-particle systems. The functions provided a method for discussing finite-temperature problems with no more conceptual difficulty than ground-state problems, and the method was equally applicable to boson and fermion systems and equilibrium and nonequilibrium problems. The lectures also explained nonequilibrium statistical physics in a systematic way and contained essential concepts on statistical physics in terms of Green’s functions with sufficient and rigorous details. In-Gee Kim thoroughly studied the lectures during one of his research projects but found that the unspecialized method used to present them in the form of a book reduced their readability. He st...

Numerical methods in dynamic fracture mechanics

International Nuclear Information System (INIS)

Beskos, D.E.

1987-01-01

A review of numerical methods for the solution of dynamic problems of fracture mechanics is presented. Finite difference, finite element and boundary element methods as applied to linear elastic or viscoelastic and non-linear elastoplastic or elastoviscoplastic dynamic fracture mechanics problems are described and critically evaluated. Both cases of stationary cracks and rapidly propagating cracks of simple I, II, III or mixed modes are considered. Harmonically varying with time or general transient dynamic disturbances in the form of external loading or incident waves are taken into account. Determination of the dynamic stress intensity factor for stationary cracks or moving cracks with known velocity history as well as determination of the crack-tip propagation history for given dynamic fracture toughness versus crack velocity relation are described and illustrated by means of certain representative examples. Finally, a brief assessment of the present state of knowledge is made and research needs are identified

Structuring Mathematical Context by Means of Problems: A Mechanism for Achieving Effective Knowledge in Higher Educatio

Directory of Open Access Journals (Sweden)

Eloy Guerrero Seide

2004-11-01

Full Text Available This article summarizes the results obtained in an exploratory and comparative study of two ways of structuring the mathematical content of a B.S. program in Agronomic Engineering at Guantanamo University, Cuba: the formal systematization of the presentation of the knowledge, and an organization through problems. The sign test is used in the proof of the hypothesis. In a preliminary form, at least, it was demonstrated that the variant of systemic structuring of knowledge through problems is more conducive to the efficiency of the knowledge acquired by students than the structure presented by means of the logical exposition of achieved knowledge.

Mechanisms in environmental control

International Nuclear Information System (INIS)

Lindeneg, K.

1994-01-01

The theory of implementation provides methods for decentralization of decisions in societies. By using mechanisms (game forms) it is possible (in theory) to implement attractive states in different economic environments. As an example the market mechanisms can implement Pareto-efficient and individual rational allocations in an Arrow-Debreu economic environment without market failures. And even when there exists externalities the market mechanism sometime can be used if it is possible to make a market for the goods not allocated on a market already - examples are marketable emission permits, and deposit refund systems. But environmental problems can often be explained by the existence of other market failures (e.g. asymmetric information), and then the market mechanism do not work properly. And instead of using regulation or traditional economic instruments (subsidies, charges, fees, liability insurance, marketable emission permits, or deposit refund systems) to correct the problems caused by market failures, some other methods can be used to deal with these problems. This paper contains a survey of mechanisms that can be used in environmental control when the problems are caused by the existence of public goods, externalities, asymmetric information, and indivisible goods in the economy. By examples it will be demonstrated how the Clarke-Groves mechanism, the Cournot-Lindahl mechanism, and other mechanisms can be used to solve specific environmental problems. This is only theory and examples, but a recent field study have used the Cournot-Lindahl mechanism to solve the problem of lake liming in Sweden. So this subject may be of some interests for environmental policy in the future. (au) 23 refs

Problems and criteria of quality improvement in end face mechanical seal rings through technological methods

Science.gov (United States)

Tarelnik, V.; Belous, A.; Antoszewski, B.; Zukov, A.

2017-08-01

In this paper are presented the recommendations for material’s selections of the mechanical seals rings and basic productive and operating requirements. The system of a directional selection of technology that ensures the required quality of working surfaces of the mechanical seals rings covers their entire life cycle. The mathematical frictional model is proposed as an instrument for calculating a linear and weighing abrasion of the mechanical seals rings and helps to improve selection’s criteria and the most rational method of strengthening.

Mechanical design of machine components

CERN Document Server

Ugural, Ansel C

2015-01-01

Mechanical Design of Machine Components, Second Edition strikes a balance between theory and application, and prepares students for more advanced study or professional practice. It outlines the basic concepts in the design and analysis of machine elements using traditional methods, based on the principles of mechanics of materials. The text combines the theory needed to gain insight into mechanics with numerical methods in design. It presents real-world engineering applications, and reveals the link between basic mechanics and the specific design of machine components and machines. Divided into three parts, this revised text presents basic background topics, deals with failure prevention in a variety of machine elements and covers applications in design of machine components as well as entire machines. Optional sections treating special and advanced topics are also included.Key Features of the Second Edition:Incorporates material that has been completely updated with new chapters, problems, practical examples...

Mathematica for Theoretical Physics Classical Mechanics and Nonlinear Dynamics

CERN Document Server

Baumann, Gerd

2005-01-01

Mathematica for Theoretical Physics: Classical Mechanics and Nonlinear Dynamics This second edition of Baumann's Mathematica® in Theoretical Physics shows readers how to solve physical problems and deal with their underlying theoretical concepts while using Mathematica® to derive numeric and symbolic solutions. Each example and calculation can be evaluated by the reader, and the reader can change the example calculations and adopt the given code to related or similar problems. The second edition has been completely revised and expanded into two volumes: The first volume covers classical mechanics and nonlinear dynamics. Both topics are the basis of a regular mechanics course. The second volume covers electrodynamics, quantum mechanics, relativity, and fractals and fractional calculus. New examples have been added and the representation has been reworked to provide a more interactive problem-solving presentation. This book can be used as a textbook or as a reference work, by students and researchers alike. A...

A solution to the decompactification problem in chiral heterotic strings

Directory of Open Access Journals (Sweden)

Ioannis Florakis

2017-08-01

Full Text Available We present a solution to the decompactification problem of gauge thresholds in chiral heterotic string theories with two large extra dimensions, where supersymmetry is spontaneously broken by the Scherk–Schwarz mechanism. Whenever the Kaluza–Klein scale that controls supersymmetry breaking is much lower than the string scale, the infinite towers of heavy states contribute non-trivially to the renormalisation of gauge couplings, which typically grow linearly with the large volume of the internal space and invalidate perturbation theory. We trace the origin of the decompactification problem to properties of the six dimensional theory obtained in the infinite volume limit and show that thresholds may instead exhibit logarithmic volume dependence and we provide the conditions for this to occur. We illustrate this mechanism with explicit string constructions where the decompactification problem does not occur.

Hidden solution to the μ/Bμ problem in gauge mediation

International Nuclear Information System (INIS)

Roy, Tuhin S.; Schmaltz, Martin

2008-01-01

We propose a solution to the μ/B μ problem in gauge mediation. The novel feature of our solution is that it uses dynamics of the hidden sector, which is often present in models with dynamical supersymmetry breaking. We give an explicit example model of gauge mediation where a very simple messenger sector generates both μ and B μ at one loop. The usual problem, that B μ is then too large, is solved by strong renormalization effects from the hidden sector which suppress B μ relative to μ. Our mechanism relies on an assumption about the signs of certain incalculable anomalous dimensions in the hidden sector. Making these assumptions not only allows us to solve the μ/B μ problem but also leads to a characteristic superpartner spectrum which would be a smoking gun signal for our mechanism.

Mathematical modelling in solid mechanics

CERN Document Server

Sofonea, Mircea; Steigmann, David

2017-01-01

This book presents new research results in multidisciplinary fields of mathematical and numerical modelling in mechanics. The chapters treat the topics: mathematical modelling in solid, fluid and contact mechanics nonconvex variational analysis with emphasis to nonlinear solid and structural mechanics numerical modelling of problems with non-smooth constitutive laws, approximation of variational and hemivariational inequalities, numerical analysis of discrete schemes, numerical methods and the corresponding algorithms, applications to mechanical engineering numerical aspects of non-smooth mechanics, with emphasis on developing accurate and reliable computational tools mechanics of fibre-reinforced materials behaviour of elasto-plastic materials accounting for the microstructural defects definition of structural defects based on the differential geometry concepts or on the atomistic basis interaction between phase transformation and dislocations at nano-scale energetic arguments bifurcation and post-buckling a...

Quantum-mechanical transport equation for atomic systems.

Science.gov (United States)

Berman, P. R.

1972-01-01

A quantum-mechanical transport equation (QMTE) is derived which should be applicable to a wide range of problems involving the interaction of radiation with atoms or molecules which are also subject to collisions with perturber atoms. The equation follows the time evolution of the macroscopic atomic density matrix elements of atoms located at classical position R and moving with classical velocity v. It is quantum mechanical in the sense that all collision kernels or rates which appear have been obtained from a quantum-mechanical theory and, as such, properly take into account the energy-level variations and velocity changes of the active (emitting or absorbing) atom produced in collisions with perturber atoms. The present formulation is better suited to problems involving high-intensity external fields, such as those encountered in laser physics.

Replica analysis for the duality of the portfolio optimization problem.

Science.gov (United States)

Shinzato, Takashi

2016-11-01

In the present paper, the primal-dual problem consisting of the investment risk minimization problem and the expected return maximization problem in the mean-variance model is discussed using replica analysis. As a natural extension of the investment risk minimization problem under only a budget constraint that we analyzed in a previous study, we herein consider a primal-dual problem in which the investment risk minimization problem with budget and expected return constraints is regarded as the primal problem, and the expected return maximization problem with budget and investment risk constraints is regarded as the dual problem. With respect to these optimal problems, we analyze a quenched disordered system involving both of these optimization problems using the approach developed in statistical mechanical informatics and confirm that both optimal portfolios can possess the primal-dual structure. Finally, the results of numerical simulations are shown to validate the effectiveness of the proposed method.

Replica analysis for the duality of the portfolio optimization problem

Science.gov (United States)

Shinzato, Takashi

2016-11-01

In the present paper, the primal-dual problem consisting of the investment risk minimization problem and the expected return maximization problem in the mean-variance model is discussed using replica analysis. As a natural extension of the investment risk minimization problem under only a budget constraint that we analyzed in a previous study, we herein consider a primal-dual problem in which the investment risk minimization problem with budget and expected return constraints is regarded as the primal problem, and the expected return maximization problem with budget and investment risk constraints is regarded as the dual problem. With respect to these optimal problems, we analyze a quenched disordered system involving both of these optimization problems using the approach developed in statistical mechanical informatics and confirm that both optimal portfolios can possess the primal-dual structure. Finally, the results of numerical simulations are shown to validate the effectiveness of the proposed method.

Quantum mechanics

International Nuclear Information System (INIS)

Anon.

1990-01-01

The book is on quantum mechanics. The emphasis is on the basic concepts and the methodology. The chapters include: Breakdown of classical concepts; Quantum mechanical concepts; Basic postulates of quantum mechanics; solution of problems in quantum mechanics; Simple harmonic oscillator; and Angular Momentum

COUGH IN CHILDREN: NEW DECISION OF OLD PROBLEM

Directory of Open Access Journals (Sweden)

T.V. Spichak

2008-01-01

Full Text Available Cough in children: new decision of old problem the mechanism of development of cough, classification of its types and main reasons of it are described in this article. Special attention was given to the problem of diagnostics of chronic cough, to peculiarities of modern instrumental diagnostic methods and to principles of therapeutic tactics. The results of treatment with anti inflammatory medication fenspiride (eurespal are presented. Russian and foreign literature data and information from american guideline in cough treatment was used in this article.Key words: cough, children, fenspiride.

Quantum mechanics - a key to understanding magnetism

International Nuclear Information System (INIS)

Van Vleck, J.H.

1978-01-01

A translation is presented of J.H. van Vleck's lecture read at the 1977 Nobel Prize avarding ceremony. The basic results obtained using quantum mechanics in solving the problems of magnetism and especially paramagnetism are chronologically arranged. (Z.J.)

Non-linear finite element analysis in structural mechanics

CERN Document Server

Rust, Wilhelm

2015-01-01

This monograph describes the numerical analysis of non-linearities in structural mechanics, i.e. large rotations, large strain (geometric non-linearities), non-linear material behaviour, in particular elasto-plasticity as well as time-dependent behaviour, and contact. Based on that, the book treats stability problems and limit-load analyses, as well as non-linear equations of a large number of variables. Moreover, the author presents a wide range of problem sets and their solutions. The target audience primarily comprises advanced undergraduate and graduate students of mechanical and civil engineering, but the book may also be beneficial for practising engineers in industry.

A compliant mechanism for inspecting extremely confined spaces

Science.gov (United States)

Mascareñas, David; Moreu, Fernando; Cantu, Precious; Shields, Daniel; Wadden, Jack; El Hadedy, Mohamed; Farrar, Charles

2017-11-01

We present a novel, compliant mechanism that provides the capability to navigate extremely confined spaces for the purpose of infrastructure inspection. Extremely confined spaces are commonly encountered during infrastructure inspection. Examples of such spaces can include pipes, conduits, and ventilation ducts. Often these infrastructure features go uninspected simply because there is no viable way to access their interior. In addition, it is not uncommon for extremely confined spaces to possess a maze-like architecture that must be selectively navigated in order to properly perform an inspection. Efforts by the imaging sensor community have resulted in the development of imaging sensors on the millimeter length scale. Due to their compact size, they are able to inspect many extremely confined spaces of interest, however, the means to deliver these sensors to the proper location to obtain the desired images are lacking. To address this problem, we draw inspiration from the field of endoscopic surgery. Specifically we consider the work that has already been done to create long flexible needles that are capable of being steered through the human body. These devices are typically referred to as ‘steerable needles.’ Steerable needle technology is not directly applicable to the problem of navigating maze-like arrangements of extremely confined spaces, but it does provide guidance on how this problem should be approached. Specifically, the super-elastic nitinol tubing material that allows steerable needles to operate is also appropriate for the problem of navigating maze-like arrangements of extremely confined spaces. Furthermore, the portion of the mechanism that enters the extremely confined space is completely mechanical in nature. The mechanical nature of the device is an advantage when the extremely confined space features environmental hazards such as radiation that could degrade an electromechanically operated mechanism. Here, we present a compliant mechanism

Emergence of classical theories from quantum mechanics

International Nuclear Information System (INIS)

Hájícek, P

2012-01-01

Three problems stand in the way of deriving classical theories from quantum mechanics: those of realist interpretation, of classical properties and of quantum measurement. Recently, we have identified some tacit assumptions that lie at the roots of these problems. Thus, a realist interpretation is hindered by the assumption that the only properties of quantum systems are values of observables. If one simply postulates the properties to be objective that are uniquely defined by preparation then all difficulties disappear. As for classical properties, the wrong assumption is that there are arbitrarily sharp classical trajectories. It turns out that fuzzy classical trajectories can be obtained from quantum mechanics by taking the limit of high entropy. Finally, standard quantum mechanics implies that any registration on a quantum system is disturbed by all quantum systems of the same kind existing somewhere in the universe. If one works out systematically how quantum mechanics must be corrected so that there is no such disturbance, one finds a new interpretation of von Neumann's 'first kind of dynamics', and so a new way to a solution of the quantum measurement problem. The present paper gives a very short review of this work.

Coupled rolling motion: a student project in non-holonomic mechanics

International Nuclear Information System (INIS)

Janova, Jitka; Musilova, Jana; Bartos, JirI

2009-01-01

This paper presents an original undergraduate student project in theoretical mechanics: a demonstration of theory and experiment agreement inspired by a recently theoretically treated mechanical problem of coupled rolling motion of two cylinders. The problem of a mechanical system subjected to non-holonomic constraints is theoretically and numerically solved. Subsequently, the solution is quantitatively verified by a simple and inexpensive experiment, originally proposed and constructed by the authors. The comparison of results of the theoretical study with experimental output shows that there are instruments to directly verify rather abstract mathematical theories even on the undergraduate level. Moreover, combining the theoretical description of the problem with an appropriate laboratory experiment and computational procedures gives students a more complex view of the physical problem as a whole. This paper can be used by physics teachers on the undergraduate university level as an inspiration for an interesting student project. Moreover, the theoretical part of this paper itself can be used by interested intermediate students themselves as a good exercise in theoretical mechanics.

An atypical presentation of mechanical failure of eruption of a mandibular permanent molar: diagnosis and treatment case report.

LENUS (Irish Health Repository)

Smith, C P

2012-06-01

Failure of eruption of mandibular permanent molars occurs infrequently but is a difficult clinical problem. It can be due to local or systemic factors or failure of the eruption process. Primary failure of eruption (PFE) is a rare condition that can result in severe posterior open bite, requires complex treatment strategies and has unfavourable outcomes. Mechanical failure of eruption (MFE) is more unusual but can respond positively to treatment. Differentiating between the two is crucial in making the correct diagnosis and managing the case successfully.

Relativistic quantum mechanics of leptons and fields

International Nuclear Information System (INIS)

Grandy, W.T. Jr.

1991-01-01

This book serves as an advanced text on the Dirac theory, and provides a monograph summarizing the description of relativistic quantum mechanics and quantum electrodynamics as classical field theories. It presents a broad, detailed, and up-to-date exposition of relativistic quantum mechanics, including the two-body problem. It also demonstrates the extent to which the behavior of stable particles and their interactions can be understood without introducing operator (second-quantized) fields. The subsequent difficulties are studied in detail and possible resolutions are presented through quantum field theory

Rooting the biggest problems in physics

DEFF Research Database (Denmark)

Javadi, Hossein; Forouzbakhsh, Farshid

2016-01-01

to combine these three theories of classical mechanics, quantum mechanics and relativity in order to reach to a unique physics. Eventually, by answering the unanswered questions, the physics problems will be solved. In this paper, the stems of physics problems are expressed and the solution of them...

Profile of respiratory problems in patients presenting to a referral pulmonary clinic

Directory of Open Access Journals (Sweden)

Dasgupta Angira

2008-01-01

Full Text Available Analysis of OPD data of 2012 patients in a referral pulmonary clinic at Kolkata was done following a protocol-based approach. Obstructive airway diseases (COPD and asthma were the most common (43% problem followed by infective lung diseases (15% including tuberculosis, bronchogenic carcinoma (8%, ILD (4%, haemopty-sis of undiagnosed etiology (4.5%, chronic cough of undiagnosed etiology (6.5% and pleural diseases (4.6%. Other diseases like obstructive sleep apnoea, sarcoid-osis, systemic diseases with lung involvements etc., and non respiratory problems formed the rest (14.4%.

Nonlocal quantum field theory and stochastic quantum mechanics

International Nuclear Information System (INIS)

Namsrai, K.

1986-01-01

This volume presents a systematic development of the implications to both quantum mechanics and quantum field theory of the hypothesis of a stochastic structure of space-time. Some applications to elementary particle physics are also considered. Part 1 is concerned with nonlocal quantum field theory and, among other topics, deals with quantized fields, electromagnetic and weak processes, the Schroedinger equation, and functional methods and their applications. Part 2 presents an introduction to stochastic mechanics and many specific problems of interest are discussed. (Auth.)

Quality-Aware Incentive Mechanism for Mobile Crowd Sensing

Directory of Open Access Journals (Sweden)

Ling-Yun Jiang

2017-01-01

Full Text Available Mobile crowd sensing (MCS is a novel sensing paradigm which can sense human-centered daily activities and the surrounding environment. The impact of mobility and selfishness of participants on the data reliability cannot be ignored in most mobile crowd sensing systems. To address this issue, we present a universal system model based on the reverse auction framework and formulate the problem as the Multiple Quality Multiple User Selection (MQMUS problem. The quality-aware incentive mechanism (QAIM is proposed to meet the quality requirement of data reliability. We demonstrate that the proposed incentive mechanism achieves the properties of computational efficiency, individual rationality, and truthfulness. And meanwhile, we evaluate the performance and validate the theoretical properties of our incentive mechanism through extensive simulation experiments.

Thermostructural and mechanical aspects of the TFTR plasma limiter design

International Nuclear Information System (INIS)

Condolff, R.; Fixler, S.

1977-01-01

This paper presents the preliminary mechanical and thermostructural aspects of the TFTR (TOKAMAK Fusion Test Reactor) plasma limiter design. The evolution of the limiter design is traced through the various stages from conceptual design to the present state. Results of parametric limiter blade studies are presented. Design criteria, requirements, design loads (mechanical and thermal), material considerations, and remote handling problems are described. The design approach used to achieve a satisfactory plasma limiter and blade is discussed

Thermostructural and mechanical aspects of the TFTR plasma limiter design

International Nuclear Information System (INIS)

Condolff, R.; Fixler, S.

1978-01-01

This paper presents the preliminary mechanical and thermostructural aspects of the TFTR (TOKAMAK Fusion Test Reactor) plasma limiter design. The evolution of the limiter design is traced through the various stages from conceptual design to the present state. Results of parametric limiter blade studies are presented. Design criteria, requirements, design loads (mechanical and thermal), material considerations, and remote handling problems are described. The design approach used to achieve a satisfactory plasma limiter and blade is discussed

Integrating Social-Contextual and Intrapersonal Mechanisms of "Maturing Out": Joint Influences of Familial-Role Transitions and Personality Maturation on Problem-Drinking Reductions.

Science.gov (United States)

Lee, Matthew R; Ellingson, Jarrod M; Sher, Kenneth J

2015-09-01

"Maturing out" of problem drinking is associated with both role transitions (e.g., getting married) and personality development. However, little is known concerning how these 2 mechanisms jointly influence problem-drinking desistance. This study investigated whether salutary effects of role transitions and personality occur at different points in young-adult development and whether they mediate one another's effects. Participants were initially recruited as first-year undergraduates, with family history of alcoholism overrepresented by design (N = 489). Using 4 waves of data at roughly ages 21, 25, 29, and 34, cross-lagged panel models estimated prospective relations among familial-role transitions (marriage or parenthood), personality (disinhibition, conscientiousness, and neuroticism), and problem drinking. Mixed support was found for the prediction of roles being more strongly associated with earlier maturing out of problem drinking and personality being more strongly associated with later maturing out. Regarding mediation, no evidence was found for the expectation that role effects would be mediated by personality. However, results did support mediation of personality effects by role transitions. Specifically, lower disinhibition and higher conscientiousness in emerging adulthood predicted role adoption, which, in turn, predicted later problem-drinking reductions. Family history of alcoholism also distally influenced these mediation processes. The differential timing of role and personality effects is consistent with the notion of decreasing contextual influences and increasing intrapersonal influences across development. In light of role incompatibility theory, results suggest that, over the course of development, the association of familial roles with problem drinking may increasingly reflect problem-drinking effects on role entry (i.e., role selection) and decreasingly reflect role entry effects on problem drinking (i.e., role socialization). As emerging

Quantum mechanics

International Nuclear Information System (INIS)

Rae, A.I.M.

1981-01-01

This book, based on a thirty lecture course given to students at the beginning of their second year, covers the quantum mechanics required by physics undergraduates. Early chapters deal with wave mechanics, including a discussion of the energy states of the hydrogen atom. These are followed by a more formal development of the theory, leading to a discussion of some advanced applications and an introduction to the conceptual problems associated with quantum measurement theory. Emphasis is placed on the fundamentals of quantum mechanics. Problems are included at the end of each chapter. (U.K.)

Fracture mechanics of piezoelectric and ferroelectric solids

CERN Document Server

Fang, Daining

2013-01-01

Fracture Mechanics of Piezoelectric and Ferroelectric Solids presents a systematic and comprehensive coverage of the fracture mechanics of piezoelectric/ferroelectric materials, which includes the theoretical analysis, numerical computations and experimental observations. The main emphasis is placed on the mechanics description of various crack problems such static, dynamic and interface fractures as well as the physical explanations for the mechanism of electrically induced fracture. The book is intended for postgraduate students, researchers and engineers in the fields of solid mechanics, applied physics, material science and mechanical engineering. Dr. Daining Fang is a professor at the School of Aerospace, Tsinghua University, China; Dr. Jinxi Liu is a professor at the Department of Engineering Mechanics, Shijiazhuang Railway Institute, China.

Complications of otitis media - a potentially lethal problem still present

Directory of Open Access Journals (Sweden)

Norma de Oliveira Penido

Full Text Available ABSTRACT INTRODUCTION: It is an erroneous but commonly held belief that intracranial complications (ICCs of chronic and acute otitis media (COM and AOM are past diseases or from developing countries. These problems remain, despite improvements in antibiotic care. OBJECTIVE: This paper analyzes the occurrence and clinical characteristics and course of the main ICCs of otitis media (OM. METHODS: Retrospective cohort study of 51 patients with ICCs from OM, drawn from all patients presenting with OM to the emergency room of a large inner-city tertiary care hospital over a 22-year period. RESULTS: 80% of cases were secondary to COM of which the incidence of ICC was 0.8%; 20% were due to AOM. The death occurrence was 7.8%, hearing loss in 90%, and permanent neurological sequelae in 29%. Patients were 61% male. In the majority, onset of ear disease had occurred during childhood. Delay of diagnosis of both the initial infection as well as the secondary ICC was significant. ICCs included brain abscess and meningitis in 78%, and lateral sinus thrombosis, empyema and otitic hydrocephalus in 13%, 8% and 1% of cases, respectively. Twenty-seven neurosurgical procedures and 43 otologic surgery procedures were performed. Two patients were too ill for surgical intervention. CONCLUSION: ICCs of OM, although uncommon, still occur. These cases require expensive, complex and long-term inpatient treatment and frequently result in hearing loss, neurological sequelae and mortality. It is important to be aware of this potentiality in children with COM, especially, and maintain a high index of suspicion in order to refer for otologic specialty care before such complications occur.

Study of a few problems concerning plasma physics and fluid mechanics

International Nuclear Information System (INIS)

Colin, M.

2011-01-01

The works presented in this thesis deal with solving partial differential equations concerning the laser-plasma interaction and some issues in fluid mechanics. All these works involve significant research in the modelization field: the approximation of oscillating hyperbolic systems, the simulation of Zakharov-type systems involving the Raman effect, Hele-Shaw models and gigantic micelles models. They also tackles theoretical issues like the existence and the uniqueness of solutions, the stability or instability of solitary waves, the optimal control, error estimation and model convergency

Problems and solutions in quantum chemistry and physics

CERN Document Server

Johnson, Charles S

1988-01-01

Unusually varied problems, with detailed solutions, cover quantum mechanics, wave mechanics, angular momentum, molecular spectroscopy, scattering theory, more. 280 problems, plus 139 supplementary exercises.

Recent advances in celestial and space mechanics

CERN Document Server

Chyba, Monique

2016-01-01

This book presents recent advances in space and celestial mechanics, with a focus on the N-body problem and astrodynamics, and explores the development and application of computational techniques in both areas. It highlights the design of space transfers with various modes of propulsion, like solar sailing and low-thrust transfers between libration point orbits, as well as a broad range of targets and applications, like rendezvous with near Earth objects. Additionally, it includes contributions on the non-integrability properties of the collinear three- and four-body problem, and on general conditions for the existence of stable, minimum energy configurations in the full N-body problem. A valuable resource for physicists and mathematicians with research interests in celestial mechanics, astrodynamics and optimal control as applied to space transfers, as well as for professionals and companies in the industry.

Mechanical Engineering Senior Design Project Final Presentations | College

Science.gov (United States)

Engineering Research Computational Mechanics Laboratory Environmental Engineering Laboratory Geotechnical of Engineering & Applied Science A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L Programs Concentration in Biomedical Engineering Concentration on Ergonomics M.S. Program in Computer

Floral phenology, secondary pollen presentation and pollination mechanism in Inula racemosa (Angiosperms: Asteraceae

Directory of Open Access Journals (Sweden)

P.A. Shabir

2013-06-01

Full Text Available Inula racemosa Hook. f. is protandrous, discharges pollen grains inside the anther tube and presents pollen secondarily onto the sweeping hairs of the style. The style and stigmatic branches present the yellow clumped pollen grains for pollination. This study describes floral functional morphology and phenology, anther dehiscence and pollen presentation, growth and behaviour of style during anthesis and pollination mechanism of I. racemosa. The species is entomophilous and is characterized by a highly asynchronous sexual phase. A large degree of asynchrony from floret to floret in a capitulum, and capitulum to capitulum in a plant, keeps the pollen dispersed for a longer duration. Two insect families were represented in the pollinator survey: Hymenoptera and Diptera. A significant correlation was observed between the number of capitula visited per bout and foraging time. We discuss morphological features of the ?owers which may enhance the pollen removal rate per bee visit and consequently cause a high visitation and pollination rate.

Few-body problem in terms of correlated Gaussians

Science.gov (United States)

Silvestre-Brac, Bernard; Mathieu, Vincent

2007-10-01

In their textbook, Suzuki and Varga [Stochastic Variational Approach to Quantum-Mechanical Few-Body Problems (Springer, Berlin, 1998)] present the stochastic variational method with the correlated Gaussian basis in a very exhaustive way. However, the Fourier transform of these functions and their application to the management of a relativistic kinetic energy operator are missing and cannot be found in the literature. In this paper we present these interesting formulas. We also give a derivation for formulations concerning central potentials.

Predictive information processing is a fundamental learning mechanism present in early development: evidence from infants.

Science.gov (United States)

Trainor, Laurel J

2012-02-01

Evidence is presented that predictive coding is fundamental to brain function and present in early infancy. Indeed, mismatch responses to unexpected auditory stimuli are among the earliest robust cortical event-related potential responses, and have been measured in young infants in response to many types of deviation, including in pitch, timing, and melodic pattern. Furthermore, mismatch responses change quickly with specific experience, suggesting that predictive coding reflects a powerful, early-developing learning mechanism. Copyright © 2011 Elsevier B.V. All rights reserved.

The issue of gauge choice in the Landau problem and the physics of canonical and mechanical orbital angular momenta

Science.gov (United States)

Wakamatsu, M.; Kitadono, Y.; Zhang, P.-M.

2018-05-01

One intriguing issue in the nucleon spin decomposition problem is the existence of two types of decompositions, which are representably characterized by two different orbital angular momenta (OAMs) of quarks. The one is the mechanical OAM, while the other is the so-called gauge-invariant canonical (g.i.c.) OAM, the concept of which was introduced by Chen et al. An especially delicate quantity is the g.i.c. OAM, which must be distinguished from the ordinary (gauge-variant) canonical OAM. We find that, owing to its analytically solvable nature, the famous Landau problem offers an ideal tool to understand the difference and the physical meaning of the above three OAMs, i.e. the standard canonical OAM, g.i.c. OAM, and the mechanical OAM. We analyze these three OAMs in two different formulations of the Landau problem, first in the standard (gauge-fixed) formulation and second in the gauge-invariant (but path-dependent) formulation of DeWitt. Especially interesting is the latter formalism. It is shown that the choice of path has an intimate connection with the choice of gauge, but they are not necessarily equivalent. Then, we answer the question about what is the consequence of a particular choice of path in DeWitt's formalism. This analysis also clarifies the implication of the gauge symmetry hidden in the concept of g.i.c. OAM. Finally, we show that the finding above offers a clear understanding about the uniqueness or non-uniqueness problem of the nucleon spin decomposition, which arises from the arbitrariness in the definition of the so-called physical component of the gauge field.

Hybrid-finite-element analysis of some nonlinear and 3-dimensional problems of engineering fracture mechanics

Science.gov (United States)

Atluri, S. N.; Nakagaki, M.; Kathiresan, K.

1980-01-01

In this paper, efficient numerical methods for the analysis of crack-closure effects on fatigue-crack-growth-rates, in plane stress situations, and for the solution of stress-intensity factors for arbitrary shaped surface flaws in pressure vessels, are presented. For the former problem, an elastic-plastic finite element procedure valid for the case of finite deformation gradients is developed and crack growth is simulated by the translation of near-crack-tip elements with embedded plastic singularities. For the latter problem, an embedded-elastic-singularity hybrid finite element method, which leads to a direct evaluation of K-factors, is employed.

Present opto-mechanical design status of NFIRAOS

Science.gov (United States)

Byrnes, Peter W. G.; Atwood, Jenny; Boucher, Marc-André; Fitzsimmons, Joeleff; Hill, Alexis; Herriot, Glen; Spanò, Paolo; Szeto, Kei; Wevers, Ivan

2014-07-01

This paper describes the current opto-mechanical design of NFIRAOS (Narrow Field InfraRed Adaptive Optics System) for the Thirty Meter Telescope (TMT). The preliminary design update review for NFIRAOS was successfully held in December 2011, and incremental design progress has since occurred on several fronts. The majority of NFIRAOS is housed within an insulated and cooled enclosure, and operates at -30 C to reduce background emissivity. The cold optomechanics are attached to a space-frame structure, kinematically supported by bipods that penetrate the insulated enclosure. The bipods are attached to an exo-structure at ambient temperature, which also supports up to three client science instruments and a science calibration unit.

Present and future environmental ''problems'' with SF6 and other fluorinated gases

International Nuclear Information System (INIS)

Brunt, R.J. Van

1996-01-01

Sulfur hexafluoride (SF 6 ) is widely used as an insulating and arc interrupting gas in high-voltage systems and has found application in plasma processing of materials. However, SF 6 is known to decompose in electrical discharges to form toxic and corrosive gaseous compounds such as SOF 4 , SOF 2 , SO 2 F 2 , and HF. Of particular concern are the species S 2 F 10 and S 2 O 2 F 10 that are known to be highly toxic and to be formed in corona, spark, and arc discharges in high-pressure SF 6 . The conditions under which these byproducts are formed, the methods for removal, and the possible hazards that they present are reviewed. Sulfur hexafluoride is also an efficient absorber of infrared radiation and is estimated to have a global warning potential that is 2.5 x 10 4 times greater than that of CO 2 . Methods that have been proposed to control the use of SF 6 and reduce the rate of its release into the atmosphere will be examined. The advantages, disadvantages, and likely problems with finding technically feasible and environmentally acceptable replacements for SF 6 will be discussed

Research Projects in Physics: A Mechanism for Teaching Ill-Structured Problem Solving

Science.gov (United States)

Milbourne, Jeff; Bennett, Jonathan

2017-10-01

Physics education research has a tradition of studying problem solving, exploring themes such as physical intuition and differences between expert and novice problem solvers. However, most of this work has focused on traditional, or well-structured, problems, similar to what might appear in a textbook. Less work has been done with open-ended, or ill-structured, problems, similar to the types of problems students might face in their professional lives. Given the national discourse on educational system reform aligned with 21st century skills, including problem solving, it is critical to provide educational experiences that help students learn to solve all types of problems, including ill-structured problems.

Introduction to the Yang-Baxter Equation with Open Problems

Directory of Open Access Journals (Sweden)

Florin Nichita

2012-04-01

Full Text Available The Yang-Baxter equation first appeared in theoretical physics, in a paper by the Nobel laureate C. N. Yang, and in statistical mechanics, in R. J. Baxter’s work. Later, it turned out that this equation plays a crucial role in: quantum groups, knot theory, braided categories, analysis of integrable systems, quantum mechanics, non-commutative descent theory, quantum computing, non-commutative geometry, etc. Many scientists have found solutions for the Yang-Baxter equation, obtaining qualitative results (using the axioms of various algebraic structures or quantitative results (usually using computer calculations. However, the full classification of its solutions remains an open problem. In this paper, we present the (set-theoretical Yang-Baxter equation, we sketch the proof of a new theorem, we state some problems, and discuss about directions for future research.

Artificial intelligence and design: Opportunities, research problems and directions

Science.gov (United States)

Amarel, Saul

1990-01-01

The issues of industrial productivity and economic competitiveness are of major significance in the U.S. at present. By advancing the science of design, and by creating a broad computer-based methodology for automating the design of artifacts and of industrial processes, we can attain dramatic improvements in productivity. It is our thesis that developments in computer science, especially in Artificial Intelligence (AI) and in related areas of advanced computing, provide us with a unique opportunity to push beyond the present level of computer aided automation technology and to attain substantial advances in the understanding and mechanization of design processes. To attain these goals, we need to build on top of the present state of AI, and to accelerate research and development in areas that are especially relevant to design problems of realistic complexity. We propose an approach to the special challenges in this area, which combines 'core work' in AI with the development of systems for handling significant design tasks. We discuss the general nature of design problems, the scientific issues involved in studying them with the help of AI approaches, and the methodological/technical issues that one must face in developing AI systems for handling advanced design tasks. Looking at basic work in AI from the perspective of design automation, we identify a number of research problems that need special attention. These include finding solution methods for handling multiple interacting goals, formation problems, problem decompositions, and redesign problems; choosing representations for design problems with emphasis on the concept of a design record; and developing approaches for the acquisition and structuring of domain knowledge with emphasis on finding useful approximations to domain theories. Progress in handling these research problems will have major impact both on our understanding of design processes and their automation, and also on several fundamental questions

Pseudo-Hermitian Representation of Quantum Mechanics

International Nuclear Information System (INIS)

Mustafazade, A.

2008-01-01

I will outline a formulation of quantum mechanics in which the inner product on the Hilbert space of a quantum system is treated as a degree of freedom. I will outline some of the basic mathematical and conceptual features of the resulting theory and discuss some of its applications. In particular, I will present a quantum mechanical analogue of Einstein's field equations that links the inner product of the Hilbert space and the Hamiltonian of the system and discuss how the resulting theory can be used to address a variety of problems in classical electrodynamics, relativistic quantum mechanics, and quantum computation

Concepts for benchmark problem development for fracture mechanics application in safety evaluation of nuclear piping in subcreep service

International Nuclear Information System (INIS)

Reich, M.; Esztergar, E.P.; Erdogan, F.; Gray, T.G.F.; Spence, J.

1979-01-01

This report provides basic concepts and a review of the problem areas associated with the development of analytical and experimental programs for a systematic evaluation and comparison of the currently available fracture mechanics theories. The basis for such an evaluation is conceived as a series of benchmark problems which are accurately specified examples of geometry, loading, and environmental conditions, characteristic of large diameter thin wall piping systems in nuclear service. Starting from the simplest test coupons for cracked plate specimens, the program is to be designed in such a way that the range of validity and relative merit of the competing assessment methods can be evaluated and the results applied to increasingly more complex test configurations and ultimately to real piping systems. (Auth.)

Applications of statistical mechanics to some problems in physics and astrophysics (Homi Jehangir Bhabha Medal Lecture-1981)

International Nuclear Information System (INIS)

Auluck, F.C.

1982-01-01

There is a deep connection between problems in statistical mechanics and problems in the partition theory of numbers. The number-theoretic methods are elegant and also more powerful. The theory of pressure ionization leads to a mass-radius relation for white dwarf stars and planets. There is a shift in the energy levels of an atom surrounded by an electromagnetic radiation, which is dependent on the intensity of the radiation field. The Thomas-Fermi theory with exchange and correlation can be used to explain the observed properties of atoms, their periodic features and their behaviour under high pressures. A gravitating fluid sphere becomes spheroidal under the influence of magnetic field and rotation and exhibits various modes of oscillation. The theory of random fragmentation can be used to explain the mass function for stars and galaxies. (author)

On quantization, the generalised Schroedinger equation and classical mechanics

International Nuclear Information System (INIS)

Jones, K.R.W.

1991-01-01

A ψ-dependent linear functional operator, was defined, which solves the problem of quantization in non-relativistic quantum mechanics. Weyl ordering is implemented automatically and permits derivation of many of the quantum to classical correspondences. The parameter λ presents a natural C ∞ deformation of the dynamical structure of quantum mechanics via a non-linear integro-differential 'Generalised Schroedinger Equation', admitting an infinite family of soliton solutions. All these solutions are presented and it is shown that this equation gives an exact dynamic and energetic reproduction of classical mechanics with the correct measurement theoretic limit. 23 refs

How Cognitive Style and Problem Complexity Affect Preservice Agricultural Education Teachers' Abilities to Solve Problems in Agricultural Mechanics

Science.gov (United States)

Blackburn, J. Joey; Robinson, J. Shane; Lamm, Alexa J.

2014-01-01

The purpose of this experimental study was to determine the effects of cognitive style and problem complexity on Oklahoma State University preservice agriculture teachers' (N = 56) ability to solve problems in small gasoline engines. Time to solution was operationalized as problem solving ability. Kirton's Adaption-Innovation Inventory was…

Analytical and Numerical Studies of Several Fluid Mechanical Problems

Science.gov (United States)

Kong, D. L.

2014-03-01

In this thesis, three parts, each with several chapters, are respectively devoted to hydrostatic, viscous, and inertial fluids theories and applications. Involved topics include planetary, biological fluid systems, and high performance computing technology. In the hydrostatics part, the classical Maclaurin spheroids theory is generalized, for the first time, to a more realistic multi-layer model, establishing geometries of both the outer surface and the interfaces. For one of its astrophysical applications, the theory explicitly predicts physical shapes of surface and core-mantle-boundary for layered terrestrial planets, which enables the studies of some gravity problems, and the direct numerical simulations of dynamo flows in rotating planetary cores. As another application of the figure theory, the zonal flow in the deep atmosphere of Jupiter is investigated for a better understanding of the Jovian gravity field. An upper bound of gravity field distortions, especially in higher-order zonal gravitational coefficients, induced by deep zonal winds is estimated firstly. The oblate spheroidal shape of an undistorted Jupiter resulting from its fast solid body rotation is fully taken into account, which marks the most significant improvement from previous approximation based Jovian wind theories. High viscosity flows, for example Stokes flows, occur in a lot of processes involving low-speed motions in fluids. Microorganism swimming is such a typical case. A fully three dimensional analytic solution of incompressible Stokes equation is derived in the exterior domain of an arbitrarily translating and rotating prolate spheroid, which models a large family of microorganisms such as cocci bacteria. The solution is then applied to the magnetotactic bacteria swimming problem, and good consistency has been found between theoretical predictions and laboratory observations of the moving patterns of such bacteria under magnetic fields. In the analysis of dynamics of planetary

A Weak Solution of a Stochastic Nonlinear Problem

Directory of Open Access Journals (Sweden)

M. L. Hadji

2015-01-01

Full Text Available We consider a problem modeling a porous medium with a random perturbation. This model occurs in many applications such as biology, medical sciences, oil exploitation, and chemical engineering. Many authors focused their study mostly on the deterministic case. The more classical one was due to Biot in the 50s, where he suggested to ignore everything that happens at the microscopic level, to apply the principles of the continuum mechanics at the macroscopic level. Here we consider a stochastic problem, that is, a problem with a random perturbation. First we prove a result on the existence and uniqueness of the solution, by making use of the weak formulation. Furthermore, we use a numerical scheme based on finite differences to present numerical results.

A concept for global optimization of topology design problems

DEFF Research Database (Denmark)

Stolpe, Mathias; Achtziger, Wolfgang; Kawamoto, Atsushi

2006-01-01

We present a concept for solving topology design problems to proven global optimality. We propose that the problems are modeled using the approach of simultaneous analysis and design with discrete design variables and solved with convergent branch and bound type methods. This concept is illustrated...... on two applications. The first application is the design of stiff truss structures where the bar areas are chosen from a finite set of available areas. The second considered application is simultaneous topology and geometry design of planar articulated mechanisms. For each application we outline...

The two-body-problem in quantized, inertia-free mechanics

International Nuclear Information System (INIS)

Kreisel, E.

1984-01-01

There do not exist bound states of the two-particle-system in Riemann-Machian quantum mechanics. The spectrum of the energy is necessarily positively semidefinite and continuous, in analogy to the free particle of quantum mechanics. (author)

Celestial mechanics and astrodynamics theory and practice

CERN Document Server

Gurfil, Pini

2016-01-01

This volume is designed as an introductory text and reference book for graduate students, researchers and practitioners in the fields of astronomy, astrodynamics, satellite systems, space sciences and astrophysics. The purpose of the book is to emphasize the similarities between celestial mechanics and astrodynamics, and to present recent advances in these two fields so that the reader can understand the inter-relations and mutual influences. The juxtaposition of celestial mechanics and astrodynamics is a unique approach that is expected to be a refreshing attempt to discuss both the mechanics of space flight and the dynamics of celestial objects. “Celestial Mechanics and Astrodynamics: Theory and Practice” also presents the main challenges and future prospects for the two fields in an elaborate, comprehensive and rigorous manner. The book presents homogenous and fluent discussions of the key problems, rendering a portrayal of recent advances in the field together with some basic concepts and essential in...

Research on a Unique Instructional Framework for Elevating Students’ Quantitative Problem Solving Abilities

Science.gov (United States)

Prather, Edward E.; Wallace, Colin Scott

2018-06-01

We present an instructional framework that allowed a first time physics instructor to improve students quantitative problem solving abilities by more than a letter grade over what was achieved by students in an experienced instructor’s course. This instructional framework uses a Think-Pair-Share approach to foster collaborative quantitative problem solving during the lecture portion of a large enrollment introductory calculus-based mechanics course. Through the development of carefully crafted and sequenced TPS questions, we engage students in rich discussions on key problem solving issues that we typically only hear about when a student comes for help during office hours. Current work in the sophomore E&M course illustrates that this framework is generalizable to classes beyond the introductory level and for topics beyond mechanics.

Classicality in quantum mechanics

Energy Technology Data Exchange (ETDEWEB)

Dreyer, Olaf [Theoretical Physics, Blackett Laboratory, Imperial College London, London, SW7 2AZ (United Kingdom)

2007-05-15

In this article we propose a solution to the measurement problem in quantum mechanics. We point out that the measurement problem can be traced to an a priori notion of classicality in the formulation of quantum mechanics. If this notion of classicality is dropped and instead classicality is defined in purely quantum mechanical terms the measurement problem can be avoided. We give such a definition of classicality. It identifies classicality as a property of large quantum system. We show how the probabilistic nature of quantum mechanics is a result of this notion of classicality. We also comment on what the implications of this view are for the search of a quantum theory of gravity.

Classicality in quantum mechanics

International Nuclear Information System (INIS)

Dreyer, Olaf

2007-01-01

In this article we propose a solution to the measurement problem in quantum mechanics. We point out that the measurement problem can be traced to an a priori notion of classicality in the formulation of quantum mechanics. If this notion of classicality is dropped and instead classicality is defined in purely quantum mechanical terms the measurement problem can be avoided. We give such a definition of classicality. It identifies classicality as a property of large quantum system. We show how the probabilistic nature of quantum mechanics is a result of this notion of classicality. We also comment on what the implications of this view are for the search of a quantum theory of gravity

Modern Olympic sport: economic mechanism of self-development

Directory of Open Access Journals (Sweden)

Bubka S.N.

2011-12-01

Full Text Available The paper presents characteristics of the Olympic movement as a real self-sufficient socio-economic phenomenon, with its inherent internal mechanism of self-development. There are identified the main problems of improving the mechanism of self-development, the modernization of the distribution of income from the sale of commercial programs between the participants of Olympic sports and enhance the fight against "piracy" marketing. The objectives of the NOC assistance program implemented by "Olympic Solidarity" fund are defined, the structure of expenditures on the IOC "Olympic Solidarity" program implementation are presented.

Solution mechanism guide: implementing innovation within a research & development organization.

Science.gov (United States)

Keeton, Kathryn E; Richard, Elizabeth E; Davis, Jeffrey R

2014-10-01

In order to create a culture more open to novel problem-solving mechanisms, NASA's Human Health and Performance Directorate (HH&P) created a strategic knowledge management tool that educates employees about innovative problem-solving techniques, the Solution Mechanism Guide (SMG). The SMG is a web-based, interactive guide that leverages existing and innovative problem-solving methods and presents this information as a unique user experience so that the employee is empowered to make the best decision about which problem-solving tool best meets their needs. By integrating new and innovative methods with existing problem solving tools, the SMG seamlessly introduces open innovation and collaboration concepts within HH&P to more effectively address human health and performance risks. This commentary reviews the path of creating a more open and innovative culture within HH&P and the process and development steps that were taken to develop the SMG.

Diminished alternative reinforcement as a mechanism linking conduct problems and substance use in adolescence: a longitudinal examination.

Science.gov (United States)

Khoddam, Rubin; Cho, Junhan; Jackson, Nicholas J; Leventhal, Adam M

2018-06-01

To determine whether diminished alternative reinforcement (i.e. engagement and enjoyment from substance-free activities) mediated the longitudinal association of conduct problems with substance use in early-mid-adolescence. Structural equation modeling tested whether the association between wave 1 (baseline) conduct problems and wave 3 (24-month follow-up) substance use outcomes was mediated by diminished alternative reinforcement at wave 2 (12-month follow-up). Additional analyses tested whether sex and socio-economic status moderated this association. Ten high schools in Los Angeles, CA, USA, 2013-15. Students (n = 3396, 53.5% female, mean [standard deviation (SD)] age at wave 1 baseline = 14.1 (0.42) years). Self-reported conduct problems (11-item questionnaire), alternative reinforcement (44-item questionnaire) and use of alcohol, marijuana and combustible cigarettes during the past 6 months (yes/no) and the past 30 days (nine-level ordinal response based on days used in past 30 days). Significant associations of wave 1 conduct problems with wave 3 marijuana use during the past 6 months (β = 0.25) and past 30 days (β = 0.26) were mediated by wave 2 diminished alternative reinforcement (β indirect effect : 6 months = 0.013, 30 days = 0.017, Ps alternative reinforcement. All associations did not differ by sex and socio-economic status. Diminished alternative reinforcement may be a modifiable mechanism linking early adolescent conduct problems and subsequent marijuana use that could be targeted in prevention programs to offset the adverse health and social sequelae associated with comorbid conduct problems and marijuana use in early-mid adolescence. © 2018 Society for the Study of Addiction.

Computational modelling in fluid mechanics

International Nuclear Information System (INIS)

Hauguel, A.

1985-01-01

The modelling of the greatest part of environmental or industrial flow problems gives very similar types of equations. The considerable increase in computing capacity over the last ten years consequently allowed numerical models of growing complexity to be processed. The varied group of computer codes presented are now a complementary tool of experimental facilities to achieve studies in the field of fluid mechanics. Several codes applied in the nuclear field (reactors, cooling towers, exchangers, plumes...) are presented among others [fr

Resettable binary latch mechanism for use with paraffin linear motors

Science.gov (United States)

Maus, Daryl; Tibbitts, Scott

1991-01-01

A new resettable Binary Latch Mechanism was developed utilizing a paraffin actuator as the motor. This linear actuator alternately latches between extended and retracted positions, maintaining either position with zero power consumption. The design evolution and kinematics of the latch mechanism are presented, as well as the development problems and lessons that were learned.

Continuum Mechanics using Mathematica® Fundamentals, Applications and Scientific Computing

CERN Document Server

Romano, Antonio; Marasco, Addolorata

2006-01-01

This book's methodological approach familiarizes readers with the mathematical tools required to correctly define and solve problems in continuum mechanics. The book covers essential principles and fundamental applications, and provides a solid basis for a deeper study of more challenging and specialized problems related to elasticity, fluid mechanics, plasticity, materials with memory, piezoelectricity, ferroelectricity, magneto-fluid mechanics, and state changes. Key topics and features: * Concise presentation strikes a balance between fundamentals and applications * Requisite mathematical background carefully collected in two introductory chapters and two appendices * Recent developments highlighted through coverage of more significant applications to areas such as porous media, electromagnetic fields, and phase transitions Continuum Mechanics using Mathematica® is aimed at advanced undergraduates, graduate students, and researchers in applied mathematics, mathematical physics, and engineering. It may ser...

Computation of disordered system from the first principles of classical mechanics and ℕℙ hard problem

Energy Technology Data Exchange (ETDEWEB)

Gevorkyan, A. S., E-mail: g-ashot@sci.am; Sahakyan, V. V. [National Academy of Sciences of the Republic of Armenia, Institute for Informatics and Automation Problems (Armenia)

2017-03-15

We study the classical 1D Heisenberg spin glasses in the framework of nearest-neighboring model. Based on the Hamilton equations we obtained the system of recurrence equations which allows to perform node-by-node calculations of a spin-chain. It is shown that calculations from the first principles of classical mechanics lead to ℕℙ hard problem, that however in the limit of the statistical equilibrium can be calculated by ℙ algorithm. For the partition function of the ensemble a new representation is offered in the form of one-dimensional integral of spin-chains’ energy distribution.

The measurement problem in quantum mechanics: approximation to the phenomenon of decoherence by operational identities

International Nuclear Information System (INIS)

Usera, J.I.

1996-01-01

An approach based on bits and pieces of standard wisdom plus and operational quantum mechanical identity deduced by the author is presented here in order to convey arguments concerning the quantum theory of measurement and which betray a flavor against completive claims for quantum mechanics. Special emphasis is put on the phenomenon of decoherence. This phenomenon (which is experimentally verifiable) finds natural room within the formalism while the wave function collapse (which is not) is precluded. (Author)

Analytical Solutions to Non-linear Mechanical Oscillation Problems

DEFF Research Database (Denmark)

Kaliji, H. D.; Ghadimi, M.; Barari, Amin

2011-01-01

In this paper, the Max-Min Method is utilized for solving the nonlinear oscillation problems. The proposed approach is applied to three systems with complex nonlinear terms in their motion equations. By means of this method, the dynamic behavior of oscillation systems can be easily approximated u...

Review of nuclear and non-nuclear applications of membrane processes - present problems and future R and D work

International Nuclear Information System (INIS)

Gutman, R.G.; Knibbs, R.H.

1989-01-01

This paper describes membrane processes that are of industrial significance in the fluid phase separations. The review covers pressure driven, cross-flow processes (reverse osmosis, ultrafiltration and microfiltration) and electrically driven membrane processes (electro-dialysis and electro-osmosis). A brief description of the mechanism of each of the different types of membrane process is given. The most common types of module design, spiral wound, hollow fibre and tubular are illustrated and compared and the operating limitations of temperature, pressure and pH are discussed. A review of membrane processes already finding large scale industrial applications is given and the paper concludes with a brief discussion of possible avenues of future R and D that might help to alleviate the problems of concentration polarisation and fouling of membranes. (author)

[Amebiasis and amebic liver abscess in Mexico: a present-day public health problem].

Science.gov (United States)

Escandón Romero, C; García Manzo, N T; Escobedo de la Peña, J; Hernández Ramos, J M; Olvera Alvarez, J; Cabral Soto, J

1996-01-01

Amebiasis still remains as a major public health problem in the world. It is one of the most common reasons for medical consult. There are more than half a million cases of amebiasis just at the Mexican Institute of the Social Security. There is still a lack of epidemiologic information on amebiasis in Mexico. To describe the secular trend fro amebiasis and for amebic liver abscess in the Mexican population, as well as in those covered by IMSS Solidaridad. An ecologic trend study was carried on. Incidence rate of amebiasis in all of its forms of presentation, and of amebic liver abscess, were plotted against each year for the 1986-1994 period. Amebiasis incidence in all of its forms of presentation showed a stable trend in this period, as it was seen with amebic liver abscess. Amebiasis is more common in the first years of life. On the contrary, amebic liver abscess showed an inverted 'J' pattern; its occurrence is higher in the extreme years of life. Fatality rates have shown a descendent trend. Amebiasis reflects socioeconomic conditions in Mexico and the fact that Mexican is still an endless culture. There is a need to promote health education, better diagnostic procedures and detection of asymptomatic carriers. Health policies for mothers that are asymptomatic carriers should be reviewed, due to the high rates of amebiasis and amebic liver abscess in children under one year of age.

An Agent for the Prospect Presentation Problem

Science.gov (United States)

2014-05-01

Economics, 12:133–158. [18] Daniel Kahneman . Thinking , fast and slow . Allen Lane, London, 2011. [19] Daniel Kahneman and Amos Tversky. Prospect theory...u(X) = log(X) (2) 2.2 Prospect Theory The Prospect Theory was presented by Kahneman and Tversky in [19] and later refined to the Cumulative Prospect...fully rationally, but rather use their own de- cision weights when deciding whether to reject or accept a gamble. In his book, Kahneman [18] (p.314

Problems and prospects of mechanical rice-transplanting in Pakistan

International Nuclear Information System (INIS)

Majid, A.; Rehman, A.; Akram, M.; Zafar, A.W.; Ahmed, M.

2003-01-01

Among the many factors, low plant-population is the fundamental reason for poor rice-yield, despite advancements in rice-culture technology. The contracted manual transplanting of paddy seedlings is considered to be one of the key factors responsible for poor stand-establishment of rice in the field. The labourers transplant rice-seedlings at considerably wider distance than the recommended one, resulting in poor establishment of crop-stand and, ultimately, lower yield. The mechanized rice-culture is thought to be a viable substitute for manual rice-culture in Pakistan. Over the years, a lot of effort has been made in this regard, but could not popularize mechanical transplantation of paddy, for a number of reasons. The popularization of mechanical rice-culture in the country needs significant reforms in nursery raising, water management, improvement of soil organic-matter and land-preparation, along with emphasis on local manufacturing of the cost-effective simple mechanical rice transplanter. (author)

Proceedings of the CISDEN meeting on present problems in Community and international law in the nuclear field

International Nuclear Information System (INIS)

1981-06-01

These proceedings of the meeting of the Italian Nuclear Law Study Centre reproduce in full the three papers presented, together with the ensuing discussions. The papers respectively deal with the recent Constitutional Court Decision opposing a referendum on nuclear power plant site selection; international contracts -private autonomy and State law- and the incidence of recent trends on nuclear contracts; problems in relation to the entry into force of the 1980 Euratom radiation protection directive and the revision of relevant Italian regulations. (NEA) [fr

An adaptive quantum mechanics/molecular mechanics method for the infrared spectrum of water: incorporation of the quantum effect between solute and solvent.

Science.gov (United States)

Watanabe, Hiroshi C; Banno, Misa; Sakurai, Minoru

2016-03-14

Quantum effects in solute-solvent interactions, such as the many-body effect and the dipole-induced dipole, are known to be critical factors influencing the infrared spectra of species in the liquid phase. For accurate spectrum evaluation, the surrounding solvent molecules, in addition to the solute of interest, should be treated using a quantum mechanical method. However, conventional quantum mechanics/molecular mechanics (QM/MM) methods cannot handle free QM solvent molecules during molecular dynamics (MD) simulation because of the diffusion problem. To deal with this problem, we have previously proposed an adaptive QM/MM "size-consistent multipartitioning (SCMP) method". In the present study, as the first application of the SCMP method, we demonstrate the reproduction of the infrared spectrum of liquid-phase water, and evaluate the quantum effect in comparison with conventional QM/MM simulations.

Mechanics, analysis and geometry 200 years after Lagrange

CERN Document Server

1991-01-01

Providing a logically balanced and authoritative account of the different branches and problems of mathematical physics that Lagrange studied and developed, this volume presents up-to-date developments in differential goemetry, dynamical systems, the calculus of variations, and celestial and analytical mechanics.

Dynamic balancing of planar mechanisms using toric geometry

OpenAIRE

Moore, Brian; Schicho, Josef; Gosselin, Clement M.

2007-01-01

In this paper, a new method to determine the complete set of dynamically balanced planar four-bar mechanims is presented. Using complex variables to model the kinematics of the mechanism, the dynamic balancing constraints are written as algebraic equations over complex variables and joint angular velocities. After elimination of the joint angular velocity variables, the problem is formulated as a problem of factorization of Laurent polynomials. Using toric polynomial division, necessary and s...

Fractional calculus with applications in mechanics vibrations and diffusion processes

CERN Document Server

Atanackovic, T; Stankovic, Bogoljub; Zorica , Dusan

2014-01-01

This book contains mathematical preliminaries in which basic definitions of fractional derivatives and spaces are presented. The central part of the book contains various applications in classical mechanics including fields such as: viscoelasticity, heat conduction, wave propagation and variational Hamilton-type principles. Mathematical rigor will be observed in the applications. The authors provide some problems formulated in the classical setting and some in the distributional setting. The solutions to these problems are presented in analytical form and these solutions are then analyzed num

Cooperated Bayesian algorithm for distributed scheduling problem

Institute of Scientific and Technical Information of China (English)

QIANG Lei; XIAO Tian-yuan

2006-01-01

This paper presents a new distributed Bayesian optimization algorithm (BOA) to overcome the efficiency problem when solving NP scheduling problems.The proposed approach integrates BOA into the co-evolutionary schema,which builds up a concurrent computing environment.A new search strategy is also introduced for local optimization process.It integrates the reinforcement learning(RL) mechanism into the BOA search processes,and then uses the mixed probability information from BOA (post-probability) and RL (pre-probability) to enhance the cooperation between different local controllers,which improves the optimization ability of the algorithm.The experiment shows that the new algorithm does better in both optimization (2.2%) and convergence (11.7%),compared with classic BOA.

Mathematica® for Theoretical Physics Electrodynamics, Quantum Mechanics, General Relativity and Fractals

CERN Document Server

Baumann, Gerd

2005-01-01

Mathematica for Theoretical Physics: Electrodynamics, Quantum Mechanics, General Relativity, and Fractals This second edition of Baumann's Mathematica® in Theoretical Physics shows readers how to solve physical problems and deal with their underlying theoretical concepts while using Mathematica® to derive numeric and symbolic solutions. Each example and calculation can be evaluated by the reader, and the reader can change the example calculations and adopt the given code to related or similar problems. The second edition has been completely revised and expanded into two volumes: The first volume covers classical mechanics and nonlinear dynamics. Both topics are the basis of a regular mechanics course. The second volume covers electrodynamics, quantum mechanics, relativity, and fractals and fractional calculus. New examples have been added and the representation has been reworked to provide a more interactive problem-solving presentation. This book can be used as a textbook or as a reference work, by student...

Perspectives of ukrainian mechanical engineering development

OpenAIRE

Dyrda, E.; Schepetkova, A.; Galushko, O.

2013-01-01

Theses are devoted to problems and perspectives of Ukrainian mechanical engineering development. Role of mechanical engineering in national economy is described. Problems of mechanical engineering, such as losing the cometetive advantages, production decreasing, debts growing, ineffective assets structure, are investigated. Influence of European integration process on mechanical engineering enterprises is discussed.

Physics and Mechanics of New Materials and Their Applications

CERN Document Server

Chang, Shun-Hsyung; Gupta, Vijay

2018-01-01

This book presents selected peer-reviewed contributions from the 2017 International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2017 (Jabalpur, India, 14–16 October, 2017), which is devoted to processing techniques, physics, mechanics, and applications of advanced materials. The book focuses on a wide spectrum of nanostructures, ferroelectric crystals, materials and composites as well as promising materials with special properties. It presents nanotechnology approaches, modern environmentally friendly piezoelectric and ferromagnetic techniques and physical and mechanical studies of the structural and physical–mechanical properties of materials. Various original mathematical and numerical methods are applied to the solution of different technological, mechanical and physical problems that are interesting from theoretical, modeling and experimental points of view. Further, the book highlights novel devices with high accuracy, longevity and extended capabilities ...

Mechanism for Self-Reacted Friction Stir Welding

Science.gov (United States)

Venable, Richard; Bucher, Joseph

2004-01-01

A mechanism has been designed to apply the loads (the stirring and the resection forces and torques) in self-reacted friction stir welding. This mechanism differs somewhat from mechanisms used in conventional friction stir welding, as described below. The tooling needed to apply the large reaction loads in conventional friction stir welding can be complex. Self-reacted friction stir welding has become popular in the solid-state welding community as a means of reducing the complexity of tooling and to reduce costs. The main problems inherent in self-reacted friction stir welding originate in the high stresses encountered by the pin-and-shoulder assembly that produces the weld. The design of the present mechanism solves the problems. The mechanism includes a redesigned pin-and-shoulder assembly. The welding torque is transmitted into the welding pin by a square pin that fits into a square bushing with set-screws. The opposite or back shoulder is held in place by a Woodruff key and high-strength nut on a threaded shaft. The Woodruff key reacts the torque, while the nut reacts the tensile load on the shaft.

Quantum N-body problem with a minimal length

International Nuclear Information System (INIS)

Buisseret, Fabien

2010-01-01

The quantum N-body problem is studied in the context of nonrelativistic quantum mechanics with a one-dimensional deformed Heisenberg algebra of the form [x,p]=i(1+βp 2 ), leading to the existence of a minimal observable length √(β). For a generic pairwise interaction potential, analytical formulas are obtained that allow estimation of the ground-state energy of the N-body system by finding the ground-state energy of a corresponding two-body problem. It is first shown that in the harmonic oscillator case, the β-dependent term grows faster with increasing N than the β-independent term. Then, it is argued that such a behavior should also be observed with generic potentials and for D-dimensional systems. Consequently, quantum N-body bound states might be interesting places to look at nontrivial manifestations of a minimal length, since the more particles that are present, the more the system deviates from standard quantum-mechanical predictions.

Assessment of vertical transfer in problem solving: Mapping the problem design space

Science.gov (United States)

Von Korff, Joshua; Hu, Dehui; Rebello, N. Sanjay

2012-02-01

In schema-based theories of cognition, vertical transfer occurs when a learner constructs a new schema to solve a transfer task or chooses between several possible schemas. Vertical transfer is interesting to study, but difficult to measure. Did the student solve the problem using the desired schema or by an alternative method? Perhaps the problem cued the student to use certain resources without knowing why? In this paper, we consider some of the threats to validity in problem design. We provide a theoretical framework to explain the challenges faced in designing vertical transfer problems, and we contrast these challenges with horizontal transfer problem design. We have developed this framework from a set of problems that we tested on introductory mechanics students, and we illustrate the framework using one of the problems.

Retrieval of LAI and leaf chlorophyll content from remote sensing data by agronomy mechanism knowledge to solve the ill-posed inverse problem

Science.gov (United States)

Li, Zhenhai; Nie, Chenwei; Yang, Guijun; Xu, Xingang; Jin, Xiuliang; Gu, Xiaohe

2014-10-01

Leaf area index (LAI) and LCC, as the two most important crop growth variables, are major considerations in management decisions, agricultural planning and policy making. Estimation of canopy biophysical variables from remote sensing data was investigated using a radiative transfer model. However, the ill-posed problem is unavoidable for the unique solution of the inverse problem and the uncertainty of measurements and model assumptions. This study focused on the use of agronomy mechanism knowledge to restrict and remove the ill-posed inversion results. For this purpose, the inversion results obtained using the PROSAIL model alone (NAMK) and linked with agronomic mechanism knowledge (AMK) were compared. The results showed that AMK did not significantly improve the accuracy of LAI inversion. LAI was estimated with high accuracy, and there was no significant improvement after considering AMK. The validation results of the determination coefficient (R2) and the corresponding root mean square error (RMSE) between measured LAI and estimated LAI were 0.635 and 1.022 for NAMK, and 0.637 and 0.999 for AMK, respectively. LCC estimation was significantly improved with agronomy mechanism knowledge; the R2 and RMSE values were 0.377 and 14.495 μg cm-2 for NAMK, and 0.503 and 10.661 μg cm-2 for AMK, respectively. Results of the comparison demonstrated the need for agronomy mechanism knowledge in radiative transfer model inversion.

Examination of the relationship between preservice science teachers' scientific reasoning and problem solving skills on basic mechanics

Science.gov (United States)

Yuksel, Ibrahim; Ates, Salih

2018-02-01

The purpose of this study is to determine relationship between scientific reasoning and mechanics problem solving skills of students in science education program. Scientific Reasoning Skills Test (SRST) and Basic Mechanics Knowledge Test (BMKT) were applied to 90 second, third and fourth grade students who took Scientific Reasoning Skills course at science teaching program of Gazi Faculty of Education for three successive fall semesters of 2014, 2015 and 2016 academic years. It was found a statistically significant positive (p = 0.038 <0.05) but a low correlation (r = 0.219) between SRST and BMKT. There were no significant relationship among Conservation Laws, Proportional Thinking, Combinational Thinking, Correlational Thinking, Probabilistic Thinking subskills of reasoning and BMKT. There were significant and positive correlation among Hypothetical Thinking and Identifying and Controlling Variables subskills of reasoning and BMKT. The findings of the study were compared with other studies in the field and discussed.

ITEM-QM solutions for EM problems in image reconstruction exemplary for the Compton Camera

CERN Document Server

Pauli, Josef; Anton, G

2002-01-01

Imaginary time expectation maximation (ITEM), a new algorithm for expectation maximization problems based on the quantum mechanics energy minimalization via imaginary (euclidian) time evolution is presented. Both (the algorithm as well as the implementation (http://www.johannes-pauli.de/item/index.html) are published under the terms of General GNU public License (http://www.gnu.org/copyleft/gpl.html). Due to its generality ITEM is applicable to various image reconstruction problems like CT, PET, SPECT, NMR, Compton Camera, tomosynthesis as well as any other energy minimization problem. The choice of the optimal ITEM Hamiltonian is discussed and numerical results are presented for the Compton Camera.

Binary Bees Algorithm - bioinspiration from the foraging mechanism of honeybees to optimize a multiobjective multidimensional assignment problem

Science.gov (United States)

Xu, Shuo; Ji, Ze; Truong Pham, Duc; Yu, Fan

2011-11-01

The simultaneous mission assignment and home allocation for hospital service robots studied is a Multidimensional Assignment Problem (MAP) with multiobjectives and multiconstraints. A population-based metaheuristic, the Binary Bees Algorithm (BBA), is proposed to optimize this NP-hard problem. Inspired by the foraging mechanism of honeybees, the BBA's most important feature is an explicit functional partitioning between global search and local search for exploration and exploitation, respectively. Its key parts consist of adaptive global search, three-step elitism selection (constraint handling, non-dominated solutions selection, and diversity preservation), and elites-centred local search within a Hamming neighbourhood. Two comparative experiments were conducted to investigate its single objective optimization, optimization effectiveness (indexed by the S-metric and C-metric) and optimization efficiency (indexed by computational burden and CPU time) in detail. The BBA outperformed its competitors in almost all the quantitative indices. Hence, the above overall scheme, and particularly the searching history-adapted global search strategy was validated.

Structural mechanics in nuclear power plant

International Nuclear Information System (INIS)

Han Liangbi

1998-01-01

The main research works in structural mechanics in reactor technology are emphatically introduced. It is completed by structural mechanics engineers at Shanghai Nuclear Research and Design Institute associated with the design and construction problems for Qinshan NPP Unit 1 and Pakistani CHASNUPP. About structural mechanics problem for the containment, the rock and soft soil two different bases are considered. For the later the interaction between soil and structure is carefully studied. About the structural mechanics problem for the equipment and pipings, the three dimensional stress and fracture analyses are studied. For the structural dynamics problem, including flow induced vibration, the response analyses under earthquake and loss coolant accident loadings are studied. For pipings, the leak before break technique has been emphatically introduced. A lot of mathematical models, the used computer codes, analytical calculations and experimental results are also introduced. This is a comprehensive description about structural mechanics problem in pressurized water reactor nuclear power plant

Implementation of heaters on thermally actuated spacecraft mechanisms

Science.gov (United States)

Busch, John D.; Bokaie, Michael D.

1994-01-01

This paper presents general insight into the design and implementation of heaters as used in actuating mechanisms for spacecraft. Problems and considerations that were encountered during development of the Deep Space Probe and Science Experiment (DSPSE) solar array release mechanism are discussed. Obstacles included large expected fluctuations in ambient temperature, variations in voltage supply levels outgassing concerns, heater circuit design, materials selection, and power control options. Successful resolution of these issues helped to establish a methodology which can be applied to many of the heater design challenges found in thermally actuated mechanisms.

Antisocial Traits, Distress Tolerance, and Alcohol Problems as Predictors of Intimate Partner Violence in Men Arrested for Domestic Violence.

Science.gov (United States)

Brem, Meagan J; Florimbio, Autumn Rae; Elmquist, JoAnna; Shorey, Ryan C; Stuart, Gregory L

2018-01-01

Men with antisocial personality disorder (ASPD) traits are at an increased risk for consuming alcohol and perpetrating intimate partner violence (IPV). However, previous research has neglected malleable mechanisms potentially responsible for the link between ASPD traits, alcohol problems, and IPV perpetration. Efforts to improve the efficacy of batterer intervention programs (BIPs) would benefit from exploration of such malleable mechanisms. The present study is the first to examine distress tolerance as one such mechanism linking men's ASPD traits to their alcohol problems and IPV perpetration. Using a cross-sectional sample of 331 men arrested for domestic violence and court-referred to BIPs, the present study used structural equation modeling to examine pathways from men's ASPD traits to IPV perpetration directly and indirectly through distress tolerance and alcohol problems. Results supported a two-chain partial mediational model. ASPD traits were related to psychological aggression perpetration directly and indirectly via distress tolerance and alcohol problems. A second pathway emerged by which ASPD traits related to higher levels of alcohol problems, which related to psychological aggression perpetration. Controlling for psychological aggression perpetration, neither distress tolerance nor alcohol problems explained the relation between ASPD traits and physical assault perpetration. These results support and extend existing conceptual models of IPV perpetration. Findings suggest intervention efforts for IPV should target both distress tolerance and alcohol problems.

Effects of Worked Examples, Example-Problem Pairs, and Problem-Example Pairs Compared to Problem Solving

NARCIS (Netherlands)

Van Gog, Tamara; Kester, Liesbeth; Paas, Fred

2010-01-01

Van Gog, T., Kester, L., & Paas, F. (2010, August). Effects of worked examples, example-problem pairs, and problem-example pairs compared to problem solving. Paper presented at the Biannual EARLI SIG meeting of Instructional design and Learning and instruction with computers, Ulm, Germany.

The fuel element of the first charge for EL 4; presentation, main problems arising in the research, production problems; L'element combustible du 1. jeu de EL 4; presentation, problemes essentiels poses par l'etude, problemes de fabrication

Energy Technology Data Exchange (ETDEWEB)

Ringot, C; Bailly, H; Bujas, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

The fuel element making up the first charge for EL-4 is made of slightly enriched uranium oxide canned in stainless steel. This fuel element makes it possible to operate the reactor in the safest conditions awaiting the development of the fuel which will be finally adopted; this will have a low absorption can: beryllium, or a zirconium copper alloy. The 500 mm assembly is made up of 19 small rods placed on 3 rings, inside a graphite jacket. The solution adopted was a solution using completely independent small rods. This report deals with possible problems resulting from their study and production. (authors) [French] L'element combustible du 1er jeu EL-4 est un element combustible a oxyde d'uranium legerement enrichi gaine d'acier inoxydable. C'est un element combustible permettant de faire fonctionner le reacteur EL 4 dans des conditions aussi sures que possible avant de mettre au point le combustible definitif qui sera a gaine peu absorbante: beryllium, ou alliage zirconium-cuivre. L'assemblage de longueur 500 mm est constitue de 19 crayons places sur 3 couronnes, a l'interieur d'une chemise de graphite. La solution adoptee a ete une solution a crayons independants les uns des autres. Ce rapport traite des problemes eventuels poses par leur etude et leur fabrication. (auteurs)

Finite elements in fracture mechanics theory, numerics, applications

CERN Document Server

Kuna, Meinhard

2013-01-01

Fracture mechanics has established itself as an important discipline of growing interest to those working to assess the safety, reliability and service life of engineering structures and materials. In order to calculate the loading situation at cracks and defects, nowadays numerical techniques like finite element method (FEM) have become indispensable tools for a broad range of applications. The present monograph provides an introduction to the essential concepts of fracture mechanics, its main goal being to procure the special techniques for FEM analysis of crack problems, which have to date only been mastered by experts. All kinds of static, dynamic and fatigue fracture problems are treated in two- and three-dimensional elastic and plastic structural components. The usage of the various solution techniques is demonstrated by means of sample problems selected from practical engineering case studies. The primary target group includes graduate students, researchers in academia and engineers in practice.

The quantum mechanics solver. How to apply quantum theory to modern physics. 2. ed.

International Nuclear Information System (INIS)

Basdevant, J.L.; Dalibard, J.

2006-01-01

The Quantum Mechanics Solver uniquely illustrates the application of quantum mechanical concepts to various fields of modern physics. It aims at encouraging the reader to apply quantum mechanics to research problems in fields such as molecular physics, condensed matter physics or laser physics. Advanced undergraduates and graduate students will find a rich and challenging source of material for further exploration. This book consists of a series of problems concerning present-day experimental or theoretical questions on quantum mechanics. All of these problems are based on actual physical examples, even if sometimes the mathematical structure of the models under consideration is simplified intentionally in order to get hold of the physics more rapidly. The new edition features new themes, such as the progress in measuring neutrino oscillations, quantum boxes, the quantum thermometer etc. Secondly, it includes a brief summary on the basics of quantum mechanics and the formalism we use. Finally, the problems under three main themes: Elementary Particles, Nuclei and Atoms; Quantum Entanglement and Measurement; and Complex Systems. (orig.)

Quantum mechanics on space with SU(2) fuzziness

Energy Technology Data Exchange (ETDEWEB)

Fatollahi, Amir H.; Shariati, Ahmad; Khorrami, Mohammad [Alzahra University, Department of Physics, Tehran (Iran)

2009-04-15

Quantum mechanics of models is considered which are constructed in spaces with Lie algebra type commutation relations between spatial coordinates. The case is specialized to that of the group SU(2), for which the formulation of the problem via the Euler parameterization is also presented. SU(2)-invariant systems are discussed, and the corresponding eigenvalue problem for the Hamiltonian is reduced to an ordinary differential equation, as is the case with such models on commutative spaces. (orig.)

Quantum mechanics on space with SU(2) fuzziness

International Nuclear Information System (INIS)

Fatollahi, Amir H.; Shariati, Ahmad; Khorrami, Mohammad

2009-01-01

Quantum mechanics of models is considered which are constructed in spaces with Lie algebra type commutation relations between spatial coordinates. The case is specialized to that of the group SU(2), for which the formulation of the problem via the Euler parameterization is also presented. SU(2)-invariant systems are discussed, and the corresponding eigenvalue problem for the Hamiltonian is reduced to an ordinary differential equation, as is the case with such models on commutative spaces. (orig.)

Present situation, problems and solutions of China's biomass power generation industry

International Nuclear Information System (INIS)

Liu, Jicheng; Wang, Sijia; Wei, Qiushuang; Yan, Suli

2014-01-01

With the reduction of global oil reserves, developing renewable energy has become an important issue for each country. Biomass power is an important kind of clean energy, as it has abundant resource and is environmental friendly. In the past few years, China biomass power industry has developed rapidly accompanied with some problems. This paper analyzes the current situation of China biomass power generation from several aspects such as power structure, resource distribution, investment strength, and policy environment, etc. We focus on the problems existed in practical operation and analyze the outstanding problems. At last, this paper offers several suggestions for future development on the relevant fields, such as cost, strategic planning and policy. - Highlights: • Review and analyze the internal and external environment of biomass power in China. • Summarize and classify policies of China biomass power according to time sequence. • Describe the distribution of biomass resources in China accurately on the map. • Use data to draw a picture for grasping current situation. • Provide valuable suggestions for practitioners to improve their business strategies

Quantum mechanics by walking 1. Foundations

International Nuclear Information System (INIS)

Pade, Jochen

2012-01-01

Quantum mechanics by walking introduces to the foundations of non-relativistic quantum mechanics. This book applies to studyings of teaching physics as well as all studyings of physics, who look for an appropriate, easy, fresh, and modern approach to the field. In the present first volume the essential principles of quantum mechanics are worked out. in order to be able to develop their mathematical formulation as fastly and clearly as possible, systematically between wave mechanics and algebraic presentation is changed. Beside themes, which are traditionally in textbooks of quantum mechanics, extensively actual aspects like interaction-free quantum measurement, neutrino oscillations, or quantum cryptography are considered as well as fundamental problems and epistemological questions discussed, as they occur in connection with the measurement process. The list of the postulates of quantum mechanics closes this volume; they form the framework for the extensions and applications, which are discussed in the second volume. The required mathematical aids are introduced step by step. In the appendix the most important mathematical tools are compactly collected, so that supplementing literature can be far reachingly abandoned. Furthermore in the appendix supplementing themes are deepened as for instance the Quantum Zeno effect or delayed-choice experiments.

Present status and problems of nuclear power generation

International Nuclear Information System (INIS)

Harada, Hiroshi.

1984-01-01

The nuclear power generation in Japan began in 1963 with the successful power generation in the JPDR of the Japan Atomic Energy Research Institute, and since then, more than 20 years have elapsed. The Japan Atomic Power Co. started the operation of an imported Calder Hall type gas-cooled reactor with 166,000 kWe output in Tokai Nuclear Power Station in July, 1966. In 1983, the quantity of nuclear power generation was 113.1 billion kWh, which was equivalent to 21.4 % of the total power generation in Japan. As of April 1, 1984, 25 nuclear power plants with 18.28 million kW output were in operation, 12 plants of 11.8 million kW were under construction, and 7 plants of 6.05 million kW were in preparation phase. Besides, the ATR ''Fugen'' with 165,000 kW output has been in operation, and the FBR ''Monju'' with 280,000 kW output is under construction. The capacity ratio of Japanese nuclear power stations attained 71.5 % in 1983. According to the ''Long term energy demand and supply outlook'' revised in November, 1983, the nuclear power generation in 2000 will be about 62 million kW to cater for about 16 % of primary energy supply. The problems are the improvement of economy, the establishment of independent nuclear fuel cycle, the decommissioning of nuclear reactors and so on. (Kako, I.)

Mechatronics: the future of mechanical engineering; past, present, and a vision for the future

Science.gov (United States)

Ramasubramanian, M. K.

2001-08-01

Mechatronics is the synergistic integration of precision mechanical engineering, electronics, computational hardware and software in the design of products and processes. Mechatronics, the term coined in Japan in the '70s, has evolved to symbolize what mechanical design engineers do today worldwide. The revolutionary introduction of the microprocessor (or microcontroller) in the early '80s and ever increasing performance-cost ratio has changed the paradigm of mechanical design forever, and has broadened the original definition of mechatronics to include intelligent control and autonomous decision-making. Today, increasing number of new products is being developed at the intersection between traditional disciplines of Engineering, and Computer and Material Sciences. New developments in these traditional disciplines are being absorbed into mechatronics design at an ever-increasing pace. In this paper, a brief history of mechatronics, and several examples of this rapid adaptation of technologies into product design is presented. With the ongoing information technology revolution, especially in wireless communication, smart sensors design (enabled by MEMS technology), and embedded systems engineering, mechatronics design is going through another step change in capabilities and scope. The implications of these developments in mechatronics design in the near future are discussed. Finally, deficiencies in our engineering curriculum to address the needs of the industry to cope up with these rapid changes, and proposed remedies, will also be discussed.

Identifying links between origami and compliant mechanisms

Directory of Open Access Journals (Sweden)

H. C. Greenberg

2011-12-01

Full Text Available Origami is the art of folding paper. In the context of engineering, orimimetics is the application of folding to solve problems. Kinetic origami behavior can be modeled with the pseudo-rigid-body model since the origami are compliant mechanisms. These compliant mechanisms, when having a flat initial state and motion emerging out of the fabrication plane, are classified as lamina emergent mechanisms (LEMs. To demonstrate the feasibility of identifying links between origami and compliant mechanism analysis and design methods, four flat folding paper mechanisms are presented with their corresponding kinematic and graph models. Principles from graph theory are used to abstract the mechanisms to show them as coupled, or inter-connected, mechanisms. It is anticipated that this work lays a foundation for exploring methods for LEM synthesis based on the analogy between flat-folding origami models and linkage assembly.

Selection of software for mechanical engineering undergraduates

International Nuclear Information System (INIS)

Cheah, C. T.; Yin, C. S.; Halim, T.; Naser, J.; Blicblau, A. S.

2016-01-01

A major problem with the undergraduate mechanical course is the limited exposure of students to software packages coupled with the long learning curve on the existing software packages. This work proposes the use of appropriate software packages for the entire mechanical engineering curriculum to ensure students get sufficient exposure real life design problems. A variety of software packages are highlighted as being suitable for undergraduate work in mechanical engineering, e.g. simultaneous non-linear equations; uncertainty analysis; 3-D modeling software with the FEA; analysis tools for the solution of problems in thermodynamics, fluid mechanics, mechanical system design, and solid mechanics.

Selection of software for mechanical engineering undergraduates

Energy Technology Data Exchange (ETDEWEB)

Cheah, C. T.; Yin, C. S.; Halim, T.; Naser, J.; Blicblau, A. S., E-mail: ablicblau@swin.edu.au [Swinburne University of Technology, Faculty of Science Engineering and Technology, PO Box 218 Hawthorn, Victoria, Australia, 3122 (Australia)

2016-07-12

A major problem with the undergraduate mechanical course is the limited exposure of students to software packages coupled with the long learning curve on the existing software packages. This work proposes the use of appropriate software packages for the entire mechanical engineering curriculum to ensure students get sufficient exposure real life design problems. A variety of software packages are highlighted as being suitable for undergraduate work in mechanical engineering, e.g. simultaneous non-linear equations; uncertainty analysis; 3-D modeling software with the FEA; analysis tools for the solution of problems in thermodynamics, fluid mechanics, mechanical system design, and solid mechanics.

Modelling of crustal rock mechanics for radioactive waste storage in Fennoscandia - problem definition

International Nuclear Information System (INIS)

Stephansson, O.

1987-05-01

Existing knowledge of crustal stresses for Fennoscandia is presented. Generic, two-dimensional models are proposed for vertical and planar sections of a traverse having a direction NW-SE in Northern Fennoscandia. The proposed traverse will include the major neotectonic structures at Lansjaerv and Paervie, respectively, and also the study site for storage of spent nuclear fuel at Kamlunge. The influence of glaciation, deglaciation, glacial rebound on crustal rock mechanics and stability is studied for the modelling work. Global models, with a length of roughly 100 km, will increase our over all understanding of the change in stresses and deformations. These can provide boundary conditions for regional and near-field models. Properties of strength and stiffness of intact granitic rock masses, faults and joints are considered in the modelling of the crustal rock mechanics for any of the three models described. (orig./HP)

Mechanism design visual and programmable approaches

CERN Document Server

Russell, Kevin; Sodhi, Raj S

2013-01-01

"… the book provides a lot of MATLAB® and SimMechanics examples. Students could benefit from the experience of solving the complex spatial synthesis problems using computer tools. The mathematics software tools are very efficient to do the displacement analysis, too."-Wen-Tzong Lee, National Pingtung University of Science and Technology, Neipu, Taiwan"The book covers a vast range of mechanism kinematics and design. The algorithm covering the topics presented is useful for mechanism design in class and homework assignments. The book provides an alternative modern tool, as compared to kinematics analysis methods based on Fortran or QuickBasic algorithms, covering all topics for mechanism design."-Thomas G. Chondros, University of Patras, Greece"… well elaborated for students at their first approach to the subject of mechanism design and its computation with MATLAB®."-Marco Ceccarelli, University of Cassino and South Latium, Italy.

Lectures on mathematical theory of extremum problems

CERN Document Server

1972-01-01

The author of this book, Igor' Vladimirovich Girsanov, was one of the first mathematicians to study general extremum problems and to realize the feasibility and desirability of a unified theory of extremal problems, based on a functional­ analytic approach. He actively advocated this view, and his special course, given at the Faculty of Mechanics and Mathematics of the Moscow State University in 1963 and 1964, was apparently the first systematic exposition of a unified approach to the theory of extremal problems. This approach was based on the ideas of Dubovitskii and Milyutin [1]. The general theory of extremal problems has developed so intensely during the past few years that its basic concepts may now be considered finalized. Nevertheless, as yet the basic results of this new field of mathematics have not been presented in a form accessible to a wide range of readers. (The profound paper of Dubovitskii and Milyutin [2] can hardly be recommended for a first study of the theory, since, in particular, it doe...

Piecewise-linear and bilinear approaches to nonlinear differential equations approximation problem of computational structural mechanics

OpenAIRE

Leibov Roman

2017-01-01

This paper presents a bilinear approach to nonlinear differential equations system approximation problem. Sometimes the nonlinear differential equations right-hand sides linearization is extremely difficult or even impossible. Then piecewise-linear approximation of nonlinear differential equations can be used. The bilinear differential equations allow to improve piecewise-linear differential equations behavior and reduce errors on the border of different linear differential equations systems ...

Variational and quasi-variational inequalities in mechanics

CERN Document Server

Kravchuk, Alexander S

2007-01-01

The essential aim of the present book is to consider a wide set of problems arising in the mathematical modelling of mechanical systems under unilateral constraints. In these investigations elastic and non-elastic deformations, friction and adhesion phenomena are taken into account. All the necessary mathematical tools are given: local boundary value problem formulations, construction of variational equations and inequalities, and the transition to minimization problems, existence and uniqueness theorems, and variational transformations (Friedrichs and Young-Fenchel-Moreau) to dual and saddle-point search problems. Important new results concern contact problems with friction. The Coulomb friction law and some others are considered, in which relative sliding velocities appear. The corresponding quasi-variational inequality is constructed, as well as the appropriate iterative method for its solution. Outlines of the variational approach to non-stationary and dissipative systems and to the construction of the go...

The generation problem

International Nuclear Information System (INIS)

Ecker, G.

1983-01-01

Evidence for the generation structure of quarks and leptons is reviewed. The two main aspects of the generation problem are emphasized. The concept and possible problems of horizontal symmetries are discussed. Two different mechanisms for horizontal symmetries are considered leading to a generalized permutation symmetry in SU(2)sub(L) x u(1) in one case. The second mechanism uses the discrete unbroken subgroup of an axial U(1) with hypercolour anomalies in composite models. A concrete realization in the rishon model is investigated. The two different approaches produce almost identical quark mass matrices for three generations. In addition to a correct prediction for the Cabibbo angle the models yield a very small Kobayashi-Maskawa mixing angle Theta 3 and thus provide for a natural explanation of the smallness of CP violation. (Author)

Mechanics

CERN Document Server

Chester, W

1979-01-01

When I began to write this book, I originally had in mind the needs of university students in their first year. May aim was to keep the mathematics simple. No advanced techniques are used and there are no complicated applications. The emphasis is on an understanding of the basic ideas and problems which require expertise but do not contribute to this understanding are not discussed. How­ ever, the presentation is more sophisticated than might be considered appropri­ ate for someone with no previous knowledge of the subject so that, although it is developed from the beginning, some previous acquaintance with the elements of the subject would be an advantage. In addition, some familiarity with element­ ary calculus is assumed but not with the elementary theory of differential equations, although knowledge of the latter would again be an advantage. It is my opinion that mechanics is best introduced through the motion of a particle, with rigid body problems left until the subject is more fully developed. Howev...

Alarm filtering and presentation

International Nuclear Information System (INIS)

Bray, M.A.

1989-01-01

This paper discusses alarm filtering and presentation in the control room of nuclear and other process control plants. Alarm generation and presentation is widely recognized as a general process control problem. Alarm systems often fail to provide meaningful alarms to operators. Alarm generation and presentation is an area in which computer aiding is feasible and provides clear benefits. Therefore, researchers have developed several computerized alarm filtering and presentation approaches. This paper discusses problems associated with alarm generation and presentation. Approaches to improving the alarm situation and installation issues of alarm system improvements are discussed. The impact of artificial intelligence (AI) technology on alarm system improvements is assessed. (orig.)

Solid mechanics a variational approach

CERN Document Server

Dym, Clive L

2013-01-01

Solid Mechanics: A Variational Approach, Augmented Edition presents a lucid and thoroughly developed approach to solid mechanics for students engaged in the study of elastic structures not seen in other texts currently on the market. This work offers a clear and carefully prepared exposition of variational techniques as they are applied to solid mechanics. Unlike other books in this field, Dym and Shames treat all the necessary theory needed for the study of solid mechanics and include extensive applications. Of particular note is the variational approach used in developing consistent structural theories and in obtaining exact and approximate solutions for many problems.  Based on both semester and year-long courses taught to undergraduate seniors and graduate students, this text is geared for programs in aeronautical, civil, and mechanical engineering, and in engineering science. The authors’ objective is two-fold: first, to introduce the student to the theory of structures (one- and two-dimensional) as ...

Beyond Gamification:From Problem-solving to Problem-making

OpenAIRE

Ruffino, Paolo

2014-01-01

The problem I would like to highlight in this contribution is that gamification has been thought about too much as a tool for problem solving, and not enough as a tool for problem making. The idea of gamification as a tool for problem making could be more useful – although maybe paradoxically. As long as a technique is presented as a method for the solution of problems it can too easily become an authoritative proposal, which takes one solution and vision as necessarily better than the others...

Statistical mechanics

CERN Document Server

Schwabl, Franz

2006-01-01

The completely revised new edition of the classical book on Statistical Mechanics covers the basic concepts of equilibrium and non-equilibrium statistical physics. In addition to a deductive approach to equilibrium statistics and thermodynamics based on a single hypothesis - the form of the microcanonical density matrix - this book treats the most important elements of non-equilibrium phenomena. Intermediate calculations are presented in complete detail. Problems at the end of each chapter help students to consolidate their understanding of the material. Beyond the fundamentals, this text demonstrates the breadth of the field and its great variety of applications. Modern areas such as renormalization group theory, percolation, stochastic equations of motion and their applications to critical dynamics, kinetic theories, as well as fundamental considerations of irreversibility, are discussed. The text will be useful for advanced students of physics and other natural sciences; a basic knowledge of quantum mechan...

The three-body problem in quantum mechanics

International Nuclear Information System (INIS)

Antunes, A.C.B.

1973-01-01

Different methods used in the analysis of the scattering of an elementary particle by a system of two bound particles are compared. All particles are considered spinless and distinguishable from each other. Two approaches are used in the treatment of the problem. In the first method we build an effective - potential which accounts for the interaction of the incident particle with the bound system. The second approach consists in treating the target as a system of two particles, whose momentum distribution is given by the bound state wavefunction. The three body system is then treated by the techniques of the multiple scattering series and of Glauber theory. (author)

Hardware and software and machine-tool simulation with parallel structures mechanisms

Directory of Open Access Journals (Sweden)

Keba P.V.

2016-12-01

Full Text Available The usage spectrum of mechanisms with parallel structure is spreading all the time. The mechanisms of machine-tools and manipulators become more complicated and it is necessary to improve the program-controlled modules. Closed circuit mechanisms are mostly spread in robotic complexes, where manipulator performs complicated spatial movements by the given trajectory. The usage spectrum is very wide and the most popular are sorting, welding, assembling and others. However, the problem of designing the operating programs is still present even today. It is just because the developed post-processors are created for the equipment that we have for now. But new machine tool constructions appear every day and there is a necessity to control them. The problems associated with using of hardware and software of mechanisms with parallel structure in computer-aided simulation are considered. The program for inverse problem kinematics solving is designed. New method of designing the control programs is found. The kinematic analysis methods options and calculated data obtained by computer mathematics systems are shown with «Tools Glide» software taken as an example.

Many-body problem in quantum mechanics and quantum statistical mechanics

International Nuclear Information System (INIS)

Lee, T.D.; Yang, C.N.

1983-01-01

This is a progress report on some work concerning the quantum mechanical calculation of the fugacity coefficients b/sub l/ (which correspond to the classical cluster integrals) of a Bose, a Fermi, and a Boltzmann gas at low temperatures. A binary collision expansion method is developed which allows for the systematic calculation of b/sub l/ as expansions in powers of a/λ, where a represents the parameters of the dimensions of length that characterize the low-energy two-body collision and λ is the thermal wavelength. To any power of (a/λ) the calculation of any specific b/sub l/ is reduced to a finite number of quadratures. The method, therefore, is the low-temperature counterpart of the high-temperature expansion of b/sub l/

3-D Modelling of Electromagnetic, Thermal, Mechanical and Metallurgical Couplings in Metal Forming Processes

International Nuclear Information System (INIS)

Chenot, Jean-Loup; Bay, Francois

2007-01-01

The different stages of metal forming processes often involve - beyond the mechanical deformations processes - other physical coupled problems, such as heat transfer, electromagnetism or metallurgy. The purpose of this paper is to focus on problems involving electromagnetic couplings. After a brief recall on electromagnetic modeling, we shall then focus on induction heating processes and present some results regarding heat transfer, as well as mechanical couplings. A case showing coupling for metallurgic microstructure evolution will conclude this paper

A textbook of quantum mechanics

International Nuclear Information System (INIS)

Mathews, P.M.; Venkatesan, K.

1977-01-01

After briefly surveying the inadequacy of the classical ideas and elementary older quantum theory, the ideas of wave mechanics, the postulates of quantum mechanics, exactly soluble problems, approximation techniques, scattering theory, angular momentum, time dependent problems and the basic ideas of relativistic quantum mechanics are discussed. The book is meant for the Master of Science degree course students of Indian Universities. (M.G.B.)

A centralized audio presentation manager

Energy Technology Data Exchange (ETDEWEB)

Papp, A.L. III; Blattner, M.M.

1994-05-16

The centralized audio presentation manager addresses the problems which occur when multiple programs running simultaneously attempt to use the audio output of a computer system. Time dependence of sound means that certain auditory messages must be scheduled simultaneously, which can lead to perceptual problems due to psychoacoustic phenomena. Furthermore, the combination of speech and nonspeech audio is examined; each presents its own problems of perceptibility in an acoustic environment composed of multiple auditory streams. The centralized audio presentation manager receives abstract parameterized message requests from the currently running programs, and attempts to create and present a sonic representation in the most perceptible manner through the use of a theoretically and empirically designed rule set.

The cellular automaton interpretation of quantum mechanics

CERN Document Server

't Hooft, Gerard

2016-01-01

This book presents the deterministic view of quantum mechanics developed by Nobel Laureate Gerard 't Hooft. Dissatisfied with the uncomfortable gaps in the way conventional quantum mechanics meshes with the classical world, 't Hooft has revived the old hidden variable ideas, but now in a much more systematic way than usual. In this, quantum mechanics is viewed as a tool rather than a theory. The book presents examples of models that are classical in essence, but can be analysed by the use of quantum techniques, and argues that even the Standard Model, together with gravitational interactions, might be viewed as a quantum mechanical approach to analysing a system that could be classical at its core. He shows how this approach, even though it is based on hidden variables, can be plausibly reconciled with Bell's theorem, and how the usual objections voiced against the idea of ‘superdeterminism' can be overcome, at least in principle. This framework elegantly explains - and automatically cures - the problems of...

Thermal-mechanical analysis for a viscoelastoplastic model by finite element method

International Nuclear Information System (INIS)

Vaz, L.E.; Vaz, R.O.E.

1989-01-01

The aim of this work is to present a formulation and a computer program which permits the study of problems involving the influence of the temperature on the mechanical behavior of a viscoelastoplastic material. The thermo-mechanical analysis is carried out in two steps. The first step performs the transient thermal analysis. The second step uses the time-history of the temperature distribution that results on the first step, for the transient stress analysis. The program treat plane and axi-symmetrical problems. As an application of the formulation the quenching of a cylinder of metal is examined. (author)

Asymptotic methods in mechanics of solids

CERN Document Server

Bauer, Svetlana M; Smirnov, Andrei L; Tovstik, Petr E; Vaillancourt, Rémi

2015-01-01

The construction of solutions of singularly perturbed systems of equations and boundary value problems that are characteristic for the mechanics of thin-walled structures are the main focus of the book. The theoretical results are supplemented by the analysis of problems and exercises. Some of the topics are rarely discussed in the textbooks, for example, the Newton polyhedron, which is a generalization of the Newton polygon for equations with two or more parameters. After introducing the important concept of the index of variation for functions special attention is devoted to eigenvalue problems containing a small parameter. The main part of the book deals with methods of asymptotic solutions of linear singularly perturbed boundary and boundary value problems without or with turning points, respectively. As examples, one-dimensional equilibrium, dynamics and stability problems for rigid bodies and solids are presented in detail. Numerous exercises and examples as well as vast references to the relevant Russi...

Scalable Domain Decomposition Preconditioners for Heterogeneous Elliptic Problems

Directory of Open Access Journals (Sweden)

Pierre Jolivet

2014-01-01

Full Text Available Domain decomposition methods are, alongside multigrid methods, one of the dominant paradigms in contemporary large-scale partial differential equation simulation. In this paper, a lightweight implementation of a theoretically and numerically scalable preconditioner is presented in the context of overlapping methods. The performance of this work is assessed by numerical simulations executed on thousands of cores, for solving various highly heterogeneous elliptic problems in both 2D and 3D with billions of degrees of freedom. Such problems arise in computational science and engineering, in solid and fluid mechanics. While focusing on overlapping domain decomposition methods might seem too restrictive, it will be shown how this work can be applied to a variety of other methods, such as non-overlapping methods and abstract deflation based preconditioners. It is also presented how multilevel preconditioners can be used to avoid communication during an iterative process such as a Krylov method.

Primer: Fracture mechanics in the nuclear power industry

International Nuclear Information System (INIS)

Wessel, E.T.; Server, W.L.; Kennedy, E.L.

1990-01-01

This Primer is intended to familiarize utility engineers with the fracture mechanics technology and to provide the basis for a working knowledge of the subject. It is directed towards all the engineering disciplines that are involved either directly or indirectly with the structural reliability of electrical power generation equipment and systems. These engineering disciplines include such areas as: design and stress analysis, metallurgy and materials, nondestructive inspection and quality control, structural analysis and reliability engineering, chemical engineering and water chemistry control, and architectural engineering. This Primer does not provide a comprehensive, in-depth treatment of all the detailed aspects involved in fracture mechanics. It does, however, provide sufficient information and a common vocabulary that should enable engineers to: read and converse intelligently about the subject, understand and utilize ASME Codes and Regulatory Guides involving fracture mechanics, absorb technical information presented and discussed at various technical meetings, and begin to apply this technology towards actual engineering problems encountered in the course of their work. Example problems are provided to further enhance an understanding of fracture mechanics. Also, Appendix A describes fracture mechanics computer codes available through EPRI to analyze rotors, reactor pressure vessels and piping

Research Projects in Physics: A Mechanism for Teaching Ill-Structured Problem Solving

Science.gov (United States)

Milbourne, Jeff; Bennett, Jonathan

2017-01-01

Physics education research has a tradition of studying problem solving, exploring themes such as physical intuition and differences between expert and novice problem solvers. However, most of this work has focused on traditional, or well-structured, problems, similar to what might appear in a textbook. Less work has been done with open-ended, or…

The High School Principal's Role with Respect to the Present Marihuana Problem.

Science.gov (United States)

Nostrand, Peter F.

This report indicates to principals that their schools probably have a marihuana problem; outlines measures necessary to the establishment of an effective marihuana prevention program; and suggests ways to handle the marihuana smoker once he has been identified. To help the principal focus upon, understand, and take constructive action with…

Ecological and Economic Problems of Environmental Security

Directory of Open Access Journals (Sweden)

Mashchenko Maryna A.

2018-03-01

Full Text Available The article is aimed at defining a common mechanism for assessing the ecological and economic threats and ecological losses on the basis of a long-term study to ensure the environmental security of the State. The necessity of a new approach to the State regulation through achievement of environmental security is displayed, that will allow to reduce tensions of the ecological-economic problems in Ukraine. For implementation of this approach, a general mechanism for estimation of ecological-economic threats and ecological losses is provided, which is carried out through formation of an integral costs system. The costs system is presented in the article in the form of an in-depth mechanism for estimating the ecological-economic threats on the example of ecological impacts. Structuring and preparation of the costs system for applied researches is the next stage of this prolonged research.

2012 Annual Conference on Experimental and Applied Mechanics

CERN Document Server

Crone, Wendy; Jin, Helena; Sciammarella, Cesar; Furlong, Cosme; Furlong, Cosme; Chalivendra, Vijay; Song, Bo; Casem, Daniel; Antoun, Bonnie; Qi, H; Hall, Richard; Tandon, GP; Lu, Hongbing; Lu, Charles; Yoshida, Sanichiro; Shaw, Gordon; Prorok, Barton; Barthelat, François; Korach, Chad; Grande-Allen, K; Lipke, Elizabeth; Lykofatitits, George; Zavattieri, Pablo; Starman, LaVern; Patterson, Eann; Backman, David; Cloud, Gary; Vol.1 Dynamic Behavior of Materials; Vol.2 Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; Vol.3 Imaging Methods for Novel Materials and Challenging Applications; Vol.4 Experimental and Applied Mechanics; Vol.5 Mechanics of Biological Systems and Materials; Vol.6 MEMS and Nanotechnology; Vol.7 Composite Materials and Joining Technologies for Composites

2013-01-01

Experimental and Applied Mechanics, Volume 4: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics, the fourth volume of seven from the Conference, brings together 54 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental and Applied Mechanics, including papers on:  Fracture & Fatigue Microscale & Microstructural Effects in Fatigue & Fracture Material Applications Composite Characterization Using Digital Image Correlation Techniques Multi-Scale Simulation and Testing of Composites Residual Stress Inverse Problems/Hybrid Methods Nano-Composites Microstructure Material Characterization Modeling and Uncertainty Quantification Impact Behavior of Composites.

Algorithmic Mechanism Design of Evolutionary Computation.

Science.gov (United States)

Pei, Yan

2015-01-01

We consider algorithmic design, enhancement, and improvement of evolutionary computation as a mechanism design problem. All individuals or several groups of individuals can be considered as self-interested agents. The individuals in evolutionary computation can manipulate parameter settings and operations by satisfying their own preferences, which are defined by an evolutionary computation algorithm designer, rather than by following a fixed algorithm rule. Evolutionary computation algorithm designers or self-adaptive methods should construct proper rules and mechanisms for all agents (individuals) to conduct their evolution behaviour correctly in order to definitely achieve the desired and preset objective(s). As a case study, we propose a formal framework on parameter setting, strategy selection, and algorithmic design of evolutionary computation by considering the Nash strategy equilibrium of a mechanism design in the search process. The evaluation results present the efficiency of the framework. This primary principle can be implemented in any evolutionary computation algorithm that needs to consider strategy selection issues in its optimization process. The final objective of our work is to solve evolutionary computation design as an algorithmic mechanism design problem and establish its fundamental aspect by taking this perspective. This paper is the first step towards achieving this objective by implementing a strategy equilibrium solution (such as Nash equilibrium) in evolutionary computation algorithm.

Applications in solid mechanics

DEFF Research Database (Denmark)

Ølgaard, Kristian Breum; Wells, Garth N.

2012-01-01

Problems in solid mechanics constitute perhaps the largest field of application of finite element methods. The vast majority of solid mechanics problems involve the standard momentum balance equation, posed in a Lagrangian setting, with different models distinguished by the choice of nonlinear...... or linearized kinematics, and the constitutive model for determining the stress. For some common models, the constitutive relationships are rather complex. This chapter addresses a number of canonical solid mechanics models in the context of automated modeling, and focuses on some pertinent issues that arise...

Quantum mechanical facets of chemical bonds

International Nuclear Information System (INIS)

Daudel, R.

1976-01-01

To define the concept of bond is both a central problem of quantum chemistry and a difficult one. The concept of bond appeared little by little in the mind of chemists from empirical observations. From the wave-mechanical viewpoint it is not an observable. Therefore there is no precise operator associated with that concept. As a consequence there is not a unique approach to the idea of chemical bond. This is why it is preferred to present various quantum mechanical facets, e.g. the energetic facet, the density facet, the partitioning facet and the functional facet, of that important concept. (Auth.)

Project Physics Tests 3, The Triumph of Mechanics.

Science.gov (United States)

Harvard Univ., Cambridge, MA. Harvard Project Physics.

Test items relating to Project Physics Unit 3 are presented in this booklet. Included are 70 multiple-choice and 20 problem-and-essay questions. Concepts of mechanics are examined on energy, momentum, kinetic theory of gases, pulse analyses, "heat death," water waves, power, conservation laws, normal distribution, thermodynamic laws, and…

General problems

International Nuclear Information System (INIS)

2005-01-01

This article presents the general problems as natural disasters, consequences of global climate change, public health, the danger of criminal actions, the availability to information about problems of environment

Are diagrams always helpful tools? developmental and individual differences in the effect of presentation format on student problem solving.

Science.gov (United States)

Booth, Julie L; Koedinger, Kenneth R

2012-09-01

High school and college students demonstrate a verbal, or textual, advantage whereby beginning algebra problems in story format are easier to solve than matched equations (Koedinger & Nathan, 2004). Adding diagrams to the stories may further facilitate solution (Hembree, 1992; Koedinger & Terao, 2002). However, diagrams may not be universally beneficial (Ainsworth, 2006; Larkin & Simon, 1987). To identify developmental and individual differences in the use of diagrams, story, and equation representations in problem solving. When do diagrams begin to aid problem-solving performance? Does the verbal advantage replicate for younger students? Three hundred and seventy-three students (121 sixth, 117 seventh, 135 eighth grade) from an ethnically diverse middle school in the American Midwest participated in Experiment 1. In Experiment 2, 84 sixth graders who had participated in Experiment 1 were followed up in seventh and eighth grades. In both experiments, students solved algebra problems in three matched presentation formats (equation, story, story + diagram). The textual advantage was replicated for all groups. While diagrams enhance performance of older and higher ability students, younger and lower-ability students do not benefit, and may even be hindered by a diagram's presence. The textual advantage is in place by sixth grade. Diagrams are not inherently helpful aids to student understanding and should be used cautiously in the middle school years, as students are developing competency for diagram comprehension during this time. ©2011 The British Psychological Society.

Design of planar articulated mechanisms using branch and bound

DEFF Research Database (Denmark)

Stolpe, Mathias; Kawamoto, Atsushi

2004-01-01

This paper considers an optimization model and a solution method for the design of two-dimensional mechanical mechanisms. The mechanism design problem is modeled as a nonconvex mixed integer program which allows the optimal topology and geometry of the mechanism to be determined simultaneously...... and that buckling is prevented. The feasible set of the design problem is described by nonlinear differentiable and non-differentiable constraints as well as nonlinear matrix inequalities. To solve the mechanism design problem a branch and bound method based on convex relaxations is developed. To guarantee...... mechanism design problems of realistic size to global optimality....

(Re)Constructing the Wicked Problem Through the Visual and the Verbal

DEFF Research Database (Denmark)

Holm Jacobsen, Peter; Harty, Chris; Tryggestad, Kjell

2016-01-01

Wicked problems are open ended and complex societal problems. There is a lack of empirical research into the dynamics and mechanisms that (re) construct problems to become wicked. This paper builds on an ethnographic study of a dialogue-based architect competition to do just that. The competition...... processes creates new knowledge and insights, but at the same time present new problems related to the ongoing verbal feedback. The design problem being (re) constructed appears as Heracles' fight with Hydra: Every time Heracles cut of a head, two new heads grow back. The paper contributes to understanding...... the relationship between the visual and the verbal (dialogue) in complex design processes in the early phases of large construction projects, and how the dynamic interplay between the design visualization and verbal dialogue develops before the competition produces, or negotiates, “a "winning design”....