Efficient heuristics for maximum common substructure search.

Science.gov (United States)

Englert, Péter; Kovács, Péter

2015-05-26

Maximum common substructure search is a computationally hard optimization problem with diverse applications in the field of cheminformatics, including similarity search, lead optimization, molecule alignment, and clustering. Most of these applications have strict constraints on running time, so heuristic methods are often preferred. However, the development of an algorithm that is both fast enough and accurate enough for most practical purposes is still a challenge. Moreover, in some applications, the quality of a common substructure depends not only on its size but also on various topological features of the one-to-one atom correspondence it defines. Two state-of-the-art heuristic algorithms for finding maximum common substructures have been implemented at ChemAxon Ltd., and effective heuristics have been developed to improve both their efficiency and the relevance of the atom mappings they provide. The implementations have been thoroughly evaluated and compared with existing solutions (KCOMBU and Indigo). The heuristics have been found to greatly improve the performance and applicability of the algorithms. The purpose of this paper is to introduce the applied methods and present the experimental results.

ECONOMIC REASONING MAXIMUM SLOPE IN DESIGN HIGH-SPEED LINES

Directory of Open Access Journals (Sweden)

CHERNYSHOVA O. S.

2016-04-01

Full Text Available Raising of problem The worldwide design standards high-speed lines are somewhat different. This is due to several reasons: different levels of design speed, differences of characteristics of rolling stock and, in particular, the features of the design plan and longitudinal profile, that are associated primarily with the conditions of the relief. In the design of high-speed railways in Ukraine should take into account these features and determine what the maximum slope values can be used in difficult conditions, as well as how it will affect the operational and capital costs. Purpose. To determine the optimal design parameters of the longitudinal profile. Conclusion. The results are based not only on technical, but also economic indicators and allow the assessment of the necessary capital expenditures and expected cost of the railway in the future. Analytical dependences, to predict the expected operating costs of the railway, depending on the maximum slope, its length and the total length of the section.

Maximum Efficiency per Torque Control of Permanent-Magnet Synchronous Machines

Directory of Open Access Journals (Sweden)

Qingbo Guo

2016-12-01

Full Text Available High-efficiency permanent-magnet synchronous machine (PMSM drive systems need not only optimally designed motors but also efficiency-oriented control strategies. However, the existing control strategies only focus on partial loss optimization. This paper proposes a novel analytic loss model of PMSM in either sine-wave pulse-width modulation (SPWM or space vector pulse width modulation (SVPWM which can take into account both the fundamental loss and harmonic loss. The fundamental loss is divided into fundamental copper loss and fundamental iron loss which is estimated by the average flux density in the stator tooth and yoke. In addition, the harmonic loss is obtained from the Bertotti iron loss formula by the harmonic voltages of the three-phase inverter in either SPWM or SVPWM which are calculated by double Fourier integral analysis. Based on the analytic loss model, this paper proposes a maximum efficiency per torque (MEPT control strategy which can minimize the electromagnetic loss of PMSM in the whole operation range. As the loss model of PMSM is too complicated to obtain the analytical solution of optimal loss, a golden section method is applied to achieve the optimal operation point accurately, which can make PMSM work at maximum efficiency. The optimized results between SPWM and SVPWM show that the MEPT in SVPWM has a better effect on the optimization performance. Both the theory analysis and experiment results show that the MEPT control can significantly improve the efficiency performance of the PMSM in each operation condition with a satisfied dynamic performance.

Measurement of energy efficiency based on economic foundations

International Nuclear Information System (INIS)

Filippini, Massimo; Hunt, Lester C.

2015-01-01

Energy efficiency policy is seen as a very important activity by almost all policy makers. In practical energy policy analysis, the typical indicator used as a proxy for energy efficiency is energy intensity. However, this simple indicator is not necessarily an accurate measure given changes in energy intensity are a function of changes in several factors as well as ‘true’ energy efficiency; hence, it is difficult to make conclusions for energy policy based upon simple energy intensity measures. Related to this, some published academic papers over the last few years have attempted to use empirical methods to measure the efficient use of energy based on the economic theory of production. However, these studies do not generally provide a systematic discussion of the theoretical basis nor the possible parametric empirical approaches that are available for estimating the level of energy efficiency. The objective of this paper, therefore, is to sketch out and explain from an economic perspective the theoretical framework as well as the empirical methods for measuring the level of energy efficiency. Additionally, in the second part of the paper, some of the empirical studies that have attempted to measure energy efficiency using such an economics approach are summarized and discussed.

Frontiers in the economics of energy efficiency

International Nuclear Information System (INIS)

Miguel, Carlos de; Labandeira, Xavier; Löschel, Andreas

2015-01-01

Energy efficiency has become an essential instrument to obtain effective greenhouse gas mitigation and reduced energy dependence. This introductory article contextualizes the contributions of the supplemental issue by showing the new setting for energy efficiency economics and policy; discussing the role of price instruments to promote energy savings; presenting new approaches for energy efficiency policies; and placing energy efficiency within a wider energy and environmental framework.

The Measurement and Determinants of Economic Efficiency of ...

African Journals Online (AJOL)

The Measurement and Determinants of Economic Efficiency of Microfinance Institutions ... players in socio-economic development especially in developing countries. ... savings products to improve on portfolio quality and ensure sustainability; ...

ON THE ECONOMIC EFFICIENCY OF ORGANIZATIONS: TOWARD A SOLUTION OF THE EFFICIENT GOVERNMENT ENTERPRISE PARADOX

Directory of Open Access Journals (Sweden)

Robert E. Wright

2007-01-01

Full Text Available The modern widely-held joint-stock corporation appears to epitomize the economically efficient large-scale organization. Some scholars observe, however, that other types of organizations, including government-owned enterprises, have also achieved high degrees of efficiency and that some joint stock corporations have been inefficient. It is here argued that the economic efficiency of organizations is largely a function of two major variables—markets tructure and incentives within the organization—and not organizational form or ownership structure per se. Case studies of two business firms: a mutual life insurer and a family-controlled publisher, and two industries: higher education and custom construction, demonstrate the importance of internal incentives and market structures to organizational economic efficiency.

Economic-efficiency considerations in restructuring electric markets

Energy Technology Data Exchange (ETDEWEB)

Hill, L.J.

1996-12-01

In response to the Energy Policy Act of 1992 and the Federal Energy Regulatory Commission`s subsequent rulemaking on transmission access, many states are exploring options to restructure their electric industries. In their deliberations on restructuring, policymakers should consider (1) the reliability of the electric system; (2) income-distribution effects on ratepayers and utilities; (3) social consequences such as effects on energy conservation, renewable energy, and the environment; and (4) economic efficiency. We address economic-efficiency considerations in this study. Economic efficiency is important because it is one of the primary reasons that policymakers should consider restructuring in the first place: improving the electric-industry`s efficiency lowers costs and, hence, electric prices. In this study, we look at the sources of (in)efficiency in existing and proposed electric markets with the objective of guiding policymakers to design efficient electric markets. The advantages of a competitive market are well known: it leads to lower costs for the utility, lower prices for consumers, more product choices, better customer service, and often the need for less regulation by federal and state agencies. In the short run, firms who cannot produce at the market-clearing price are forced to leave the industry, ensuring that customers have the lowest price possible. In the long run, competition promotes innovation and lower costs. The physical and institutional characteristics of the U.S. electric industry, however, could be impediments to attaining efficiently run, competitive markets. Because of these characteristics, there are multiple sources of efficiencies and inefficiencies in existing electric markets, and there will be multiple sources in restructured ones. The objective of policymakers should not be to trade one set of inefficiencies in existing electric markets for another set in restructured markets.

Economic-efficiency considerations in restructuring electric markets

International Nuclear Information System (INIS)

Hill, L.J.

1996-12-01

In response to the Energy Policy Act of 1992 and the Federal Energy Regulatory Commission's subsequent rulemaking on transmission access, many states are exploring options to restructure their electric industries. In their deliberations on restructuring, policymakers should consider (1) the reliability of the electric system; (2) income-distribution effects on ratepayers and utilities; (3) social consequences such as effects on energy conservation, renewable energy, and the environment; and (4) economic efficiency. We address economic-efficiency considerations in this study. Economic efficiency is important because it is one of the primary reasons that policymakers should consider restructuring in the first place: improving the electric-industry's efficiency lowers costs and, hence, electric prices. In this study, we look at the sources of (in)efficiency in existing and proposed electric markets with the objective of guiding policymakers to design efficient electric markets. The advantages of a competitive market are well known: it leads to lower costs for the utility, lower prices for consumers, more product choices, better customer service, and often the need for less regulation by federal and state agencies. In the short run, firms who cannot produce at the market-clearing price are forced to leave the industry, ensuring that customers have the lowest price possible. In the long run, competition promotes innovation and lower costs. The physical and institutional characteristics of the U.S. electric industry, however, could be impediments to attaining efficiently run, competitive markets. Because of these characteristics, there are multiple sources of efficiencies and inefficiencies in existing electric markets, and there will be multiple sources in restructured ones. The objective of policymakers should not be to trade one set of inefficiencies in existing electric markets for another set in restructured markets

Relations between the efficiency, power and dissipation for linear irreversible heat engine at maximum trade-off figure of merit

Science.gov (United States)

Iyyappan, I.; Ponmurugan, M.

2018-03-01

A trade of figure of merit (\\dotΩ ) criterion accounts the best compromise between the useful input energy and the lost input energy of the heat devices. When the heat engine is working at maximum \\dotΩ criterion its efficiency increases significantly from the efficiency at maximum power. We derive the general relations between the power, efficiency at maximum \\dotΩ criterion and minimum dissipation for the linear irreversible heat engine. The efficiency at maximum \\dotΩ criterion has the lower bound \

A critique of non-parametric efficiency analysis in energy economics studies

International Nuclear Information System (INIS)

Chen, Chien-Ming

2013-01-01

The paper reexamines non-additive environmental efficiency models with weakly-disposable undesirable outputs appeared in the literature of energy economics. These efficiency models are used in numerous studies published in this journal and other energy-related outlets. Recent studies, however, have found key limitations of the weak-disposability assumption in its application to environmental efficiency analysis. It is found that efficiency scores obtained from non-additive efficiency models can be non-monotonic in pollution quantities under the weak-disposability assumption — which is against common intuition and the principle of environmental economics. In this paper, I present taxonomy of efficiency models found in the energy economics literature and illustrate the above limitations and discuss implications of monotonicity from a practical viewpoint. Finally, I review the formulations for a variable returns-to-scale technology with weakly-disposable undesirable outputs, which has been misused in a number of papers in the energy economics literature. An application to evaluating the energy efficiencies of 23 European Union states is presented to illustrate the problem. - Highlights: • Review different environmental efficiency model used in energy economics studies • Highlight limitations of these environmental efficiency models • These limitations have not been recognized in the existing energy economics literature. • Data from 23 European Union states are used to illustrate the methodological consequences

ECONOMIC AND SOCIAL EFFICIENCY OF PROPERTY INVESTMENTS

Directory of Open Access Journals (Sweden)

Florina Oana Virlanuta

2014-03-01

Full Text Available Investments play a key part within the goods and services industry, consumerism and community as well. The effects generated by any investment project substantiate this statement, regardless the sector of activity in which they are implemented. In the current market economy, economic efficiency indicators are playing an important role in assessing and analyzing an investment project since due to these indicators, the investor can become aware of the most important aspects they need to respond promptly. In this respect, we conducted a market analysis of real estate investments in Romania, highlighting economic and social efficiency of property investments.

The Institutional Component of the Efficient Economic Policy of the State

Directory of Open Access Journals (Sweden)

Mykytas Viktoriia V

2016-01-01

Full Text Available The article substantiates the necessity of institutional accompanying the economic policy of the State, establishing an efficient system of institutions. Challenges of the contemporary globalization require changes in the State influence on economy, redefining quality parameters and principles of an efficient economic policy. Complexity of the State policy in a global environment is determined not only by importance of the tasks of establishing an efficient market against the background of increasing influences of exogenous uncertainty, but also by seeking ways of entering the global space, thus implementing the best interests of national economic development. The article deduces parameters of the concept of «efficient institution». The author believes that institutions precisely should act as the link through which social and economic development would become unseparated in order to form a stable efficient socio-economic development

Energy efficiency and economic feasibility of CCHP driven by stirling engine

International Nuclear Information System (INIS)

Kong, X.Q.; Wang, R.Z.; Huang, X.H.

2004-01-01

This paper deals with the problem of energy efficiency evaluation and economic feasibility analysis of a small scale trigeneration system for combined cooling, heating and power generation (CCHP) with an available Stirling engine. Trigeneration systems have a large potential of energy saving and economical efficiency. The decisive values for energetic efficiency evaluation of such systems are the primary energy rate and comparative primary energy saving (Δq), while the economic feasibility analysis of such systems relates the avoided cost, the total annual saving and payback period. The investigation calculates and compares the energy saving and economic efficiency of trigeneration system with Stirling engine against contemporary conventional independent cooling, heating and power, showing that a CCHP system saves fuel resources and has the assurance of economic benefits

Economic efficiency analysis of electron accelerator for irradiation processing

International Nuclear Information System (INIS)

Shi Huidong; Chen Ronghui

2003-01-01

The fixed assets, running cost and economic efficiency were discussed in this paper. For building electron accelerator of 10 MeV and 3 kW, the running cost is one time higher than building cobalt source at 2.22 x 10 15 Bq, but economic efficiency of building a electron accelerator is much higher than building a cobalt source

HE CONVERSION OF THE EFFICIENCY OF LABOR, RESPECTIVELY OF LABOR PRODUCTIVITY IN THE ECONOMIC AND COMMERCIAL RATE OF RETURN

Directory of Open Access Journals (Sweden)

Constantin CĂRUNTU

2010-12-01

Full Text Available Generally, an activity is considered to be efficient if the production implies low costs or if the revenues from selling the products on the market outweigh the expenditures that were made to achieve them. Labor productivity as an efficiency indicator of a production process represents an expression of the relationship between effect (products, services and effort (work means, labor force, work items. Through the labor productivity conversion in rates of return (economic and commercial is determined an evolution and an influence on these rates, driving the company’s own efforts to innovate, produce and harness goods, works and services with maximum utility, efficiency and competitiveness services. The aim of this paper is to highlight the work efficiency, respectively the labor productivity detached from the factorial context in the trade and economic rates of return. The introduction presents some general aspects referring to labor productivity, then it will be presented and discussed the analytical methods used in the process of reflecting the labor productivity in the rates of return, the results analysis, and at the end of this paper it will be presented some conclusions based on the study case. The expected results consist in identifying the mechanisms by which labor efficiency is converted into the company’s economic and financial performance.

The economic impacts of energy efficiency

International Nuclear Information System (INIS)

Jean, R.

1990-01-01

Energy efficiency programs add to the costs incurred by electricity users in the short term and generate significant economic benefits in the medium and long term. Using the example of programs in development at Hydro-Quebec, it is shown that the net economic benefits surpass, in present value terms, the sums invested by the electric utility and the customer, corresponding to yields of over 100%. This benefit is the principal impact of energy conservation programs which also provide employment, for every dollar invested, of the same order as that provided by hydroelectric production (i.e. costs associated with construction of generating plants, transmission lines, and distribution facilities). This evaluation takes account of the structure of purchases of goods and services brought about by energy efficiency programs and their large import component. This result may be surprising since the hydroelectric industry is strongly integrated into the Quebec economy, but it is understandable when one takes into account the importance of distribution costs to small-scale users, which causes significant local activity even when imported products are involved, and the very intensive labor requirement for certain energy efficiency measures. In addition, the employment generated by energy efficiency investments is very diversified in terms of the range of skills used and its geographic dispersion. 2 figs., 4 tabs

Economic total maximum daily load for watershed-based pollutant trading.

Science.gov (United States)

Zaidi, A Z; deMonsabert, S M

2015-04-01

Water quality trading (WQT) is supported by the US Environmental Protection Agency (USEPA) under the framework of its total maximum daily load (TMDL) program. An innovative approach is presented in this paper that proposes post-TMDL trade by calculating pollutant rights for each pollutant source within a watershed. Several water quality trading programs are currently operating in the USA with an objective to achieve overall pollutant reduction impacts that are equivalent or better than TMDL scenarios. These programs use trading ratios for establishing water quality equivalence among pollutant reductions. The inbuilt uncertainty in modeling the effects of pollutants in a watershed from both the point and nonpoint sources on receiving waterbodies makes WQT very difficult. A higher trading ratio carries with it increased mitigation costs, but cannot ensure the attainment of the required water quality with certainty. The selection of an applicable trading ratio, therefore, is not a simple process. The proposed approach uses an Economic TMDL optimization model that determines an economic pollutant reduction scenario that can be compared with actual TMDL allocations to calculate selling/purchasing rights for each contributing source. The methodology is presented using the established TMDLs for the bacteria (fecal coliform) impaired Muddy Creek subwatershed WAR1 in Rockingham County, Virginia, USA. Case study results show that an environmentally and economically superior trading scenario can be realized by using Economic TMDL model or any similar model that considers the cost of TMDL allocations.

Air conditioning with methane: Efficiency and economics optimization parameters

International Nuclear Information System (INIS)

Mastrullo, R.; Sasso, M.; Sibilio, S.; Vanoli, R.

1992-01-01

This paper presents an efficiency and economics evaluation method for methane fired cooling systems. Focus is on direct flame two staged absorption systems and alternative engine driven compressor sets. Comparisons are made with conventional vapour compression plants powered by electricity supplied by the national grid. A first and second law based thermodynamics analysis is made in which fuel use coefficients and exergy yields are determined. The economics analysis establishes annual energy savings, unit cooling energy production costs, payback periods and economics/efficiency optimization curves useful for preliminary feasibility studies

Continuity and boundary conditions in thermodynamics: From Carnot's efficiency to efficiencies at maximum power

Science.gov (United States)

Ouerdane, H.; Apertet, Y.; Goupil, C.; Lecoeur, Ph.

2015-07-01

Classical equilibrium thermodynamics is a theory of principles, which was built from empirical knowledge and debates on the nature and the use of heat as a means to produce motive power. By the beginning of the 20th century, the principles of thermodynamics were summarized into the so-called four laws, which were, as it turns out, definitive negative answers to the doomed quests for perpetual motion machines. As a matter of fact, one result of Sadi Carnot's work was precisely that the heat-to-work conversion process is fundamentally limited; as such, it is considered as a first version of the second law of thermodynamics. Although it was derived from Carnot's unrealistic model, the upper bound on the thermodynamic conversion efficiency, known as the Carnot efficiency, became a paradigm as the next target after the failure of the perpetual motion ideal. In the 1950's, Jacques Yvon published a conference paper containing the necessary ingredients for a new class of models, and even a formula, not so different from that of Carnot's efficiency, which later would become the new efficiency reference. Yvon's first analysis of a model of engine producing power, connected to heat source and sink through heat exchangers, went fairly unnoticed for twenty years, until Frank Curzon and Boye Ahlborn published their pedagogical paper about the effect of finite heat transfer on output power limitation and their derivation of the efficiency at maximum power, now mostly known as the Curzon-Ahlborn (CA) efficiency. The notion of finite rate explicitly introduced time in thermodynamics, and its significance cannot be overlooked as shown by the wealth of works devoted to what is now known as finite-time thermodynamics since the end of the 1970's. The favorable comparison of the CA efficiency to actual values led many to consider it as a universal upper bound for real heat engines, but things are not so straightforward that a simple formula may account for a variety of situations. The

Economic and environmental efficiency using a social accounting matrix

International Nuclear Information System (INIS)

Morilla, Carmen Rodriguez; Diaz-Salazar, Gaspar Llanes; Cardenete, M. Alejandro

2007-01-01

This paper aims to show the utility of the so-called Social Accounting Matrix and Environmental Accounts (SAMEA) for economic and environmental efficiency analysis. The article uses the SAMEA for Spain in 2000, applied to water resources and greenhouse gas emissions. This matrix is used as a central core of a multisectorial model of economic and environmental performance, and it calculates the denominated 'domestics SAMEA multipliers' and their decomposition into characteristic, direct, indirect and induced effects. These multipliers show some evaluation of economic and environmental efficiency. Also, we present an application of these multipliers that demonstrates that there is no causal interrelation between those sectors with higher economic backward linkages and those with higher environmental deterioration backward linkages. (author)

Quantum entanglement helps in improving economic efficiency

International Nuclear Information System (INIS)

Du Jiangfeng; Ju Chenyong; Li Hui

2005-01-01

We propose an economic regulation approach based on quantum game theory for the government to reduce the abuses of oligopolistic competition. Theoretical analysis shows that this approach can help government improve the economic efficiency of the oligopolistic market, and help prevent monopoly due to incorrect information. These advantages are completely attributed to the quantum entanglement, a unique quantum mechanical character

Quantum entanglement helps in improving economic efficiency

Science.gov (United States)

Du, Jiangfeng; Ju, Chenyong; Li, Hui

2005-02-01

We propose an economic regulation approach based on quantum game theory for the government to reduce the abuses of oligopolistic competition. Theoretical analysis shows that this approach can help government improve the economic efficiency of the oligopolistic market, and help prevent monopoly due to incorrect information. These advantages are completely attributed to the quantum entanglement, a unique quantum mechanical character.

Energy efficiency and economic fallacies: a reply; and reply

International Nuclear Information System (INIS)

Brookes, L.G.; Grubb, M.

1992-01-01

The claim that a programme of energy efficiency improvements has nothing to offer to the solution of any problem of global warming is discussed. Some very important points not previously conceded by supporters of energy efficiency solutions to economic and environmental problems are considered, namely: first that when energy supply/price is the constraint on the level of economic activity, using energy more efficiently does not help to reduce total energy demand; and, second, that it has in practice been true that when energy supply/price is not the macroeconomic constraint, once again demand for energy is not reduced by more efficient use. (author)

Economic efficiency of brownfield regeneration: study of South Moravian projects

Directory of Open Access Journals (Sweden)

Jana Korytárová

2017-06-01

Full Text Available The objective of brownfield regeneration is to increase the attractiveness and value of individual sites to a level where they can compete directly with the construction of a greenfi eld project. The aim of this paper is to examine the economic efficiency of brownfield regeneration. By using CBA outputs, the contribution of socio-economic efficiency to the total efficiency of individual projects based on EBCR was investigated on the basis of a sample of 14 projects located in the South Moravian Region. Furthermore, the expected value of EBCR was simulated by using the Monte Carlo method. The results reveal that socio-economic efficiency contributes significantly to the overall efficiency of these projects and therefore cannot be neglected during their evaluation. At the end of the paper, future research directions in this area are outlined.

Energy technologies and energy efficiency in economic modelling

DEFF Research Database (Denmark)

Klinge Jacobsen, Henrik

1998-01-01

This paper discusses different approaches to incorporating energy technologies and technological development in energy-economic models. Technological development is a very important issue in long-term energy demand projections and in environmental analyses. Different assumptions on technological ...... of renewable energy and especially wind power will increase the rate of efficiency improvement. A technologically based model in this case indirectly makes the energy efficiency endogenous in the aggregate energy-economy model....... technological development. This paper examines the effect on aggregate energy efficiency of using technological models to describe a number of specific technologies and of incorporating these models in an economic model. Different effects from the technology representation are illustrated. Vintage effects...... illustrates the dependence of average efficiencies and productivity on capacity utilisation rates. In the long run regulation induced by environmental policies are also very important for the improvement of aggregate energy efficiency in the energy supply sector. A Danish policy to increase the share...

An Efficient Algorithm for the Maximum Distance Problem

Directory of Open Access Journals (Sweden)

Gabrielle Assunta Grün

2001-12-01

Full Text Available Efficient algorithms for temporal reasoning are essential in knowledge-based systems. This is central in many areas of Artificial Intelligence including scheduling, planning, plan recognition, and natural language understanding. As such, scalability is a crucial consideration in temporal reasoning. While reasoning in the interval algebra is NP-complete, reasoning in the less expressive point algebra is tractable. In this paper, we explore an extension to the work of Gerevini and Schubert which is based on the point algebra. In their seminal framework, temporal relations are expressed as a directed acyclic graph partitioned into chains and supported by a metagraph data structure, where time points or events are represented by vertices, and directed edges are labelled with < or ≤. They are interested in fast algorithms for determining the strongest relation between two events. They begin by developing fast algorithms for the case where all points lie on a chain. In this paper, we are interested in a generalization of this, namely we consider the problem of finding the maximum ``distance'' between two vertices in a chain ; this problem arises in real world applications such as in process control and crew scheduling. We describe an O(n time preprocessing algorithm for the maximum distance problem on chains. It allows queries for the maximum number of < edges between two vertices to be answered in O(1 time. This matches the performance of the algorithm of Gerevini and Schubert for determining the strongest relation holding between two vertices in a chain.

ECONOMIC EFFICIENCY OF DIFFERENT PROTECTION TREATMENTS IN APPLE PRODUCTION

Directory of Open Access Journals (Sweden)

Vesna Tomaš

2015-06-01

Full Text Available Apple is the most represented fruit species in Croatia. Codling moth, Cydia pomonella L, is one of the most important apple pests whose population is growing from year to year. The aim of this study was to determine the economic effectiveness of four treatments against codling moth (1 - based on baculovirus; 2 - based on the group of synthetic pyrethroid; 3 - based on kaolin, 4 - control treatment, on the three apple varieties. The experiment was performed at the Agricultural Institute Osijek, Croatia, during three years (2012-2014. In order to analyze the results of apple production it was necessary to calculate production efficiency, labor productivity, and profitability of production. The results of the research of economic efficiency according to market prices treatment 1 and treatment 2 had economic coefficient above 1 with tendency of significant growth, while treatment 3 and 4 were uneconomical. The treatment 1showed advantage over the treatment 2 because of its positive effects on human health and biodiversity, as well as satisfactory economic efficiency.

Methodical Approach to Diagnostics of Efficiency of Production Economic Activity of an Enterprise

Directory of Open Access Journals (Sweden)

Zhukov Andrii V.

2014-03-01

Full Text Available The article offers developments of a methodical approach to diagnostics of efficiency of production economic activity of an enterprise, which, unlike the existing ones, is realised through the following stages: analysis of the enterprise external environment; analysis of the enterprise internal environment; identification of components of efficiency of production economic activity for carrying out complex diagnostics by the following directions: efficiency of subsystems of the enterprise production economic activity, efficiency of use of separate types of resources and socio-economic efficiency; scorecard formation; study of tendencies of change of indicators; identification of cause-effect dependencies between the main components of efficiency for diagnosing reasons of its level; diagnosing deviations of indicator values from their optimal values; development of a managerial decision on preserving and increasing efficiency of production economic activity of the enterprise.

The Efficiency of Improvement of the Economic Security System of Ukraine

Directory of Open Access Journals (Sweden)

Klunko Nataliya S.

2017-09-01

Full Text Available An analysis of approaches to the formation of efficiency of ensuring economic security was carried out. The essence of economic security has been defined and its material base has been described. Threats to the economic security of Ukraine have been systematized and their structure analyzed. Both internal and external measures to prevent threats to the economic security of Ukraine have been allocated. Dynamics of the factors on which the economic security of Ukraine depends has been considered. It has been determined that the socio-economic development strategy formulated makes the country’s economic security system efficient. Two approaches to the strategic development of the Ukrainian economy have been allocated: enhancing competitiveness and integration into the international economic associations.

Selected Banks Economic Efficiency Indicators

Directory of Open Access Journals (Sweden)

Adam Szafarczyk

2007-04-01

Full Text Available There are a lot of economic efficiency indicators in theory. It is necessary to choice some of them for concrete purposes. ROA, ROE and C/I play important role due to last experience of polish banks.Cost to Income Ratio plays very important role affecting not only efficiency monitoring process in the banks but also becoming a very important target in strategy or finance plan. There are several methodological approaches to construct this index in detail. Results are differing due to implementing methodology. This article describes trends C/I concerning both polish and foreign banks. It is difficult to compare banks in emerging country and real giants in finance mature economies.

Life cycle and economic efficiency analysis: durable pavement markings.

Science.gov (United States)

2009-07-01

This project examined the life cycle and economic efficiency of two pavement marking : materials inlaid tape and thermoplastic to find the most economical product for specific : traffic and weather conditions. Six locations in the state of Ma...

Analysis of the influence of external factors on efficiency of use of resource potential and economic growth of the region

Directory of Open Access Journals (Sweden)

M. P. Vasiliev

2017-01-01

in the regional economy. At the end of the article summarizing the opportunities and consequences of the impact of internal factors in the distribution and efficiency of the use of the potential of the resource economic complex. In addition, recommendations are made to determine the maximum number of these factors, the features of their objectification and significance, while making managerial decisions on ensuring economic growth.

DYNAMIC ECONOMIC EFFICIENCY IN THE SOUTH-WEST OLTENIA REGION

Directory of Open Access Journals (Sweden)

Laura Mariana Cismaş

2012-03-01

Full Text Available The structure of an economy is not and has never been permanent, it does not have a static character, but only a moment of stability of a system whose internal organization is, is therefore a dynamic process. In this sense, the ultimate goal of the analysis of structural changes is to highlight the phenomenon of economic efficiency in the complex process of economic growth during the cross in our country since 1990.Lisbon agenda have targeted the European Union to become the most competitive region until 2010.Ulterior this target strategy was complemented by growth and job creation, becoming the main way of creating a European competitiveness . In this context, public policy challenges identified in the national economies have become energy market liberalization, efficiency and diversification, regulation of the economic environment, innovation and technology transfer policies that contribute to a strategy of market leadership.Besides gross value added, labor productivity is also the medium of efficient use of labor.Growth achieved both national and regional level, may be related, in terms of human resource, or increase the number of employees, or a better use of existing employees work. That aecest aspect of a better use of existing staff employee makes labor productivity is a key element in the expression efficiency of economic performance. Understanding the forces governing labor productivity, and especially the accumulation of fixed capital, improving the institutional infrastructure to generate new technologies, is objectively necessary for the formulation of policies for economic growth.

Vacuum boilers developed heating surfaces technic and economic efficiency evaluation

Science.gov (United States)

Slobodina, E. N.; Mikhailov, A. G.; Semenov, B. A.

2018-01-01

The vacuum boilers as manufacturing proto types application analysis was carried out, the possible directions for the heating surfaces development are identified with a view to improving the energy efficiency. Economic characteristics to evaluate the vacuum boilers application efficiency (Net Discounted Income (NDI), Internal Rate of Return (IRR), Profitability Index (PI) and Payback Period) are represented. The given type boilers application technic and economic efficiency criteria were established. NDI changing curves depending on the finning coefficient and operating pressure were obtained as a result of the conducted calculation studies.

Measuring energy efficiency in economics: Shadow value approach

Science.gov (United States)

Khademvatani, Asgar

For decades, academic scholars and policy makers have commonly applied a simple average measure, energy intensity, for studying energy efficiency. In contrast, we introduce a distinctive marginal measure called energy shadow value (SV) for modeling energy efficiency drawn on economic theory. This thesis demonstrates energy SV advantages, conceptually and empirically, over the average measure recognizing marginal technical energy efficiency and unveiling allocative energy efficiency (energy SV to energy price). Using a dual profit function, the study illustrates how treating energy as quasi-fixed factor called quasi-fixed approach offers modeling advantages and is appropriate in developing an explicit model for energy efficiency. We address fallacies and misleading results using average measure and demonstrate energy SV advantage in inter- and intra-country energy efficiency comparison. Energy efficiency dynamics and determination of efficient allocation of energy use are shown through factors impacting energy SV: capital, technology, and environmental obligations. To validate the energy SV, we applied a dual restricted cost model using KLEM dataset for the 35 US sectors stretching from 1958 to 2000 and selected a sample of the four sectors. Following the empirical results, predicted wedges between energy price and the SV growth indicate a misallocation of energy use in stone, clay and glass (SCG) and communications (Com) sectors with more evidence in the SCG compared to the Com sector, showing overshoot in energy use relative to optimal paths and cost increases from sub-optimal energy use. The results show that energy productivity is a measure of technical efficiency and is void of information on the economic efficiency of energy use. Decomposing energy SV reveals that energy, capital and technology played key roles in energy SV increases helping to consider and analyze policy implications of energy efficiency improvement. Applying the marginal measure, we also

Energy-Efficient Algorithm for Sensor Networks with Non-Uniform Maximum Transmission Range

Directory of Open Access Journals (Sweden)

Yimin Yu

2011-06-01

Full Text Available In wireless sensor networks (WSNs, the energy hole problem is a key factor affecting the network lifetime. In a circular multi-hop sensor network (modeled as concentric coronas, the optimal transmission ranges of all coronas can effectively improve network lifetime. In this paper, we investigate WSNs with non-uniform maximum transmission ranges, where sensor nodes deployed in different regions may differ in their maximum transmission range. Then, we propose an Energy-efficient algorithm for Non-uniform Maximum Transmission range (ENMT, which can search approximate optimal transmission ranges of all coronas in order to prolong network lifetime. Furthermore, the simulation results indicate that ENMT performs better than other algorithms.

Interaction between Financial Intermediation Efficiency and Economic Growth

Directory of Open Access Journals (Sweden)

Milka Grbic

2016-12-01

Full Text Available Financial intermediaries have the key role in making a connection between savings and investments. Given the fact that an efficient transfer of savings into investments is made more difficult by transaction and information costs, financial intermediaries are specialized in minimizing the said costs per unit of invested capital. They are also trained to identify productive and innovative investment endeavors which contribute to the growth of real output. Real output growth is the basis for increasing the financial potential, which creates the basis for the development of financial intermediaries. In connection with that, apart from the analysis of the relevant factors making the process of the mobilization and transfer of savings more difficult, the theoretical models that put an emphasis on the relationship between the efficiency of financial intermediation and economic growth are discussed in the paper. The research results are indicative of the fact that the improvement in financial intermediaries’ business doing enables faster economic growth. Simultaneously, the growth of the economic activity increases the scope of the business operations conducted by financial intermediaries. Thanks to the effects of the economies of scale that contribute to a reduction in transaction and information costs, the efficiency of financial intermediations grows.

Breaking out of the economic box: energy efficiency, social rationality and non-economic drivers of behavioral change

Energy Technology Data Exchange (ETDEWEB)

Ehrhardt-Martinez, Karen; Laitner, John A. ' Skip' (ACEEE, American Council for an Energy-Efficient Economy, Washington, D.C. (United States))

2009-07-01

Energy concerns are increasingly on people's minds. According to a recent Gallup poll, nearly 30 percent of American's reported that energy prices were the most important financial problem facing their families today. But are these new concerns likely to translate into long-term behavioral changes and more energy-efficient behavior? Research suggests that it will take more than high prices to achieve maximum energy savings. People may like to think of themselves as rational economic actors, but a variety of studies by social-psychologists and behavioral economists reveal that people often act in ways that may be better described as 'socially-rational' and 'predictably irrational'. Despite these findings, many residential energy programs and most policy assessments continue to model potential energy savings as a function of existing technologies and the cost of those energy resources. This paper explores the ways in which individual behavior is shaped by the social context within which people operate and presents an alternative framework for modeling efficiency behavior. The alternative model recognizes that while individuals may not always behave in economically-rational ways, their behavior may be entirely rational from other vantage points. In fact, individuals often behave as rational social actors, determining what is and isn't 'appropriate' behavior by gleaning information from their own observations, from their peers, and from interactions within their sphere of social influence. As such, this paper explores the ways in which social rules, resources and context shape individual patterns of energy consumption. This alternative approach has important implications for program designs and policy recommendations.

Performance characteristics and parametric choices of a solar thermophotovoltaic cell at the maximum efficiency

International Nuclear Information System (INIS)

Dong, Qingchun; Liao, Tianjun; Yang, Zhimin; Chen, Xiaohang; Chen, Jincan

2017-01-01

Graphical abstract: The overall model of the solar thermophotovoltaic cell (STPVC) composed of an optical lens, an absorber, an emitter, and a photovoltaic (PV) cell with an integrated back-side reflector is updated to include various irreversible losses. - Highlights: • A new model of the irreversible solar thermophotovoltaic system is proposed. • The material and structure parameters of the system are considered. • The performance characteristics at the maximum efficiency are revealed. • The optimal values of key parameters are determined. • The system can obtain a large efficiency under a relative low concentration ratio. - Abstract: The overall model of the solar thermophotovoltaic cell (STPVC) composed of an optical lens, an absorber, an emitter, and a photovoltaic (PV) cell with an integrated back-side reflector is updated to include various irreversible losses. The power output and efficiency of the cell are analytically derived. The performance characteristics of the STPVC at the maximum efficiency are revealed. The optimum values of several important parameters, such as the voltage output of the PV cell, the area ratio of the absorber to the emitter, and the band-gap of the semiconductor material, are determined. It is found that under the condition of a relative low concentration ratio, the optimally designed STPVC can obtain a relative large efficiency.

Economic Efficiency of Selected Financial System Institutions of Local Government

Directory of Open Access Journals (Sweden)

Urszula Rabiej

2014-03-01

Full Text Available Functioning of local government units, as for as the economic sphere is concerned, is based on the financial law regulations. Those regulations aim at solving economic and social problems. The analysis of economic efficiency concerning implemented regulations is of particular importance for changing the EU’s attitude towards the influence, which EU has on functioning of the local governments. Implementing the local budgets, based on regulations which economic efficiency hasn’t been evaluated on the stage of legislation, may have a negative impact on local community and the economic situation of the country. Frequent changes of financial law cause actions, which financial effects cannot be predicted. What is more, those unstable regulations make it impossible to plan essential parts of a budget in a right way. That has a great importance in terms of correctness of long-term financial perspectives of the local government units.

Design of a wind turbine rotor for maximum aerodynamic efficiency

DEFF Research Database (Denmark)

Johansen, Jeppe; Aagaard Madsen, Helge; Gaunaa, Mac

2009-01-01

The design of a three-bladed wind turbine rotor is described, where the main focus has been highest possible mechanical power coefficient, CP, at a single operational condition. Structural, as well as off-design, issues are not considered, leading to a purely theoretical design for investigating...... maximum aerodynamic efficiency. The rotor is designed assuming constant induction for most of the blade span, but near the tip region, a constant load is assumed instead. The rotor design is obtained using an actuator disc model, and is subsequently verified using both a free-wake lifting line method...

THE MAIN APPROACHES TO THE DEFINITION OF ECONOMIC EFFICIENCY OF ENTERPRISES OF CONSTRUCTION INDUSTRY

Directory of Open Access Journals (Sweden)

A. V. Dolgova

2015-01-01

Full Text Available The problem of ambiguous interpretation of the category of "efficiency". Taking into account the fact that economic efficiency is quite complex and multifaceted category, coupled with the economic laws and applies to all activities of the enterprise this figure is one of the essential characteristics of the processes occurring in industrial organizations. The lack of a generally accepted view among domestic and foreign economists regarding the essential part of the index of efficiency of activity of the industrial enterprise leads to the impossibility of its use for the management of processes. In the conditions of market economy, the task of economic evaluation res ults of the economic entity remains an important element of the research aspects of the company. Each new refinement of recorded knowledge acts as a stimulus for the development of fundamental knowledge categories. One of the Central in the system of economic categories, in our opinion, is indicated for the effective functioning of the enterprise." Precise formulation of the conceptual framework, criteria-based composition have important theoretical value to justify the subject of any research conducted in the conditions of modern economic development of the global space. The definition of criteria and performance indicators, as well as developing sound economic policies of improving the economic mechanism of enterprise depend on a comprehensive study of the essence of economic efficiency of industrial enterprises of the industry. The article examines the main approaches to the definition of economic efficiency, as well as identify the degree of relation of the category of "efficiency" with other economic categories. The author suggested that the characteristics of the essence of economic efficiency, adequate to the task of functioning and development of enterprises in the construction industry.

Hierarchical Load Tracking Control of a Grid-Connected Solid Oxide Fuel Cell for Maximum Electrical Efficiency Operation

Directory of Open Access Journals (Sweden)

Yonghui Li

2015-03-01

Full Text Available Based on the benchmark solid oxide fuel cell (SOFC dynamic model for power system studies and the analysis of the SOFC operating conditions, the nonlinear programming (NLP optimization method was used to determine the maximum electrical efficiency of the grid-connected SOFC subject to the constraints of fuel utilization factor, stack temperature and output active power. The optimal operating conditions of the grid-connected SOFC were obtained by solving the NLP problem considering the power consumed by the air compressor. With the optimal operating conditions of the SOFC for the maximum efficiency operation obtained at different active power output levels, a hierarchical load tracking control scheme for the grid-connected SOFC was proposed to realize the maximum electrical efficiency operation with the stack temperature bounded. The hierarchical control scheme consists of a fast active power control and a slower stack temperature control. The active power control was developed by using a decentralized control method. The efficiency of the proposed hierarchical control scheme was demonstrated by case studies using the benchmark SOFC dynamic model.

The Essence and Efficiency Criteria of the Contemporary Economic Systems

Directory of Open Access Journals (Sweden)

Demydiuk Olga O

2017-02-01

Full Text Available The article generalizes and systematizes the basic scientific approaches to the definition of the category of «economic system». The author’s own definition of the contemporary economic systems as highly complex dynamic structures, characterized by the organizational heterogeneous integrity, ability to selforganization and self-development, which occur under the influence of both external and internal factors, has been proposed. The basic efficiency criteria of functioning and development of the contemporary economic systems were generalized and systematized. Some practical recommendations for improving efficiency of the economic system of Ukraine have been elaborated. In particular, the emphasis was made on the need to pay special attention to countering corruption, the illegal economic manifestations of the shadow economy, overcoming resistance by the special interest groups, which are not interested in any radical market-oriented transformations, since they lose their quasi-rent received as a result of activities of the inefficient institutions.

The Waldo County project: A partnership for energy efficient economic development

International Nuclear Information System (INIS)

Baston, D.C.

1990-01-01

In April 1988, the state of Maine designated four economically disadvantaged areas as Job Opportunity Zones. An interministerial initiative was put into place to improve the economic situation of these regions and to attract high quality jobs. One of these, Waldo County, formed part of the service territory of Central Maine Power. In May 1988, that utility asked the Alliance to Save Energy to recommend means for aligning its energy efficiency program with the state's economic improvement program in order to bring about effective economic growth in Waldo County. The utility is in the process of adopting all of the energy efficiency measures recommended by the Alliance. The utility's program in this respect is focused on support for existing small businesses in the county. In most of these businesses, the largest component of their electric bill is for lighting. A pilot program to retrofit modern energy-efficient lighting will install state-of-the-art equipment such as electronic ballasts and compact fluorescents without cost to the customer. This program will provide substantial savings to existing businesses and provide efficiency savings to the utility. Marketing of commercial and residential energy management programs is also being intensified. Energy management assistance is also given to new businesses; this assistance includes financial incentives to install energy efficient equipment

Efficiency of Photovoltaic Maximum Power Point Tracking Controller Based on a Fuzzy Logic

Directory of Open Access Journals (Sweden)

Ammar Al-Gizi

2017-07-01

Full Text Available This paper examines the efficiency of a fuzzy logic control (FLC based maximum power point tracking (MPPT of a photovoltaic (PV system under variable climate conditions and connected load requirements. The PV system including a PV module BP SX150S, buck-boost DC-DC converter, MPPT, and a resistive load is modeled and simulated using Matlab/Simulink package. In order to compare the performance of FLC-based MPPT controller with the conventional perturb and observe (P&O method at different irradiation (G, temperature (T and connected load (RL variations – rising time (tr, recovering time, total average power and MPPT efficiency topics are calculated. The simulation results show that the FLC-based MPPT method can quickly track the maximum power point (MPP of the PV module at the transient state and effectively eliminates the power oscillation around the MPP of the PV module at steady state, hence more average power can be extracted, in comparison with the conventional P&O method.

Hierarchical Load Tracking Control of a Grid-connected Solid Oxide Fuel Cell for Maximum Electrical Efficiency Operation

DEFF Research Database (Denmark)

Li, Yonghui; Wu, Qiuwei; Zhu, Haiyu

2015-01-01

efficiency operation obtained at different active power output levels, a hierarchical load tracking control scheme for the grid-connected SOFC was proposed to realize the maximum electrical efficiency operation with the stack temperature bounded. The hierarchical control scheme consists of a fast active...... power control and a slower stack temperature control. The active power control was developed by using a decentralized control method. The efficiency of the proposed hierarchical control scheme was demonstrated by case studies using the benchmark SOFC dynamic model......Based on the benchmark solid oxide fuel cell (SOFC) dynamic model for power system studies and the analysis of the SOFC operating conditions, the nonlinear programming (NLP) optimization method was used to determine the maximum electrical efficiency of the grid-connected SOFC subject...

Economic efficiency of application of solar window

Science.gov (United States)

Shapoval, Stepan

2017-12-01

Priority and qualitatively new direction in the fuel and energy sector is renewable energy. This paper describes a feasibility study of using solar window in the system of solar heat supply. The article presents literature data about the effectiveness of the use of solar systems in other countries. The results confirm a sufficient efficiency of solar heat supply with using solar Windows. Insights based on practical experience and mathematical calculations, which are aimed at a detailed explanation of economic efficiency of the proposed construction.

Economic and environmental impacts of community-based residential building energy efficiency investment

International Nuclear Information System (INIS)

Choi, Jun-Ki; Morrison, Drew; Hallinan, Kevin P.; Brecha, Robert J.

2014-01-01

A systematic framework for evaluating the local economic and environmental impacts of investment in building energy efficiency is developed. Historical residential building energy data, community-wide economic input–output data, and emission intensity data are utilized. The aim of this study is to show the comprehensive insights and connection among achieving variable target reductions for a residential building energy use, economic and environmental impacts. Central to this approach for the building energy reduction goal is the creation of individual energy models for each building based upon historical energy data and available building data. From these models, savings estimates and cost implications can be estimated for various conservation measures. A ‘worst to first’ (WF) energy efficient investment strategy is adopted to optimize the level of various direct, indirect, and induced economic impacts on the local community. This evaluation helps to illumine opportunities to establish specific energy reduction targets having greatest economic impact in the community. From an environmental perspective, short term economy-wide CO 2 emissions increase because of the increased community-wide economic activities spurred by the production and installation of energy efficiency measures, however the resulting energy savings provide continuous CO 2 reduction for various target savings. - Highlights: • WF energy efficient strategy helps to optimize various level of economic impacts. • Greatest community benefits are achieved from specific energy reduction targets. • Community-wide economic impacts vary for different energy conservation measures

Does energy efficiency improve technological change and economic growth in developing countries?

International Nuclear Information System (INIS)

Cantore, Nicola; Calì, Massimiliano; Velde, Dirk Willem te

2016-01-01

Does a trade-off exist between energy efficiency and economic growth? This question underlies some of the tensions between economic and environmental policies, especially in developing countries that often need to expand their industrial base to grow. This paper contributes to the debate by analyzing the relationship between energy efficiency and economic performance at the micro- (total factor productivity) and macro-level (countries' economic growth). It uses data on a large sample of manufacturing firms across 29 developing countries to find that lower levels of energy intensity are associated with higher total factor productivity for the majority of these countries. The results are robust to a variety of checks. Suggestive cross-country evidence points towards the same relation measured at the macro-level as well. - Highlights: •Total factor productivity is an accurate proxy of technological change. •Energy efficiency triggers total factor productivity especially in manufacturing. •Technological change via energy efficiency in manufacturing is an engine of growth.

Emf, maximum power and efficiency of fuel cells

International Nuclear Information System (INIS)

Gaggioli, R.A.; Dunbar, W.R.

1990-01-01

This paper discusses the ideal voltage of steady-flow fuel cells usually expressed by Emf = -ΔG/nF where ΔG is the Gibbs free energy of reaction for the oxidation of the fuel at the supposed temperature of operation of the cell. Furthermore, the ideal power of the cell is expressed as the product of the fuel flow rate with this emf, and the efficiency of a real fuel cell, sometimes called the Gibbs efficiency, is defined as the ratio of the actual power output to this ideal power. Such viewpoints are flawed in several respects. While it is true that if a cell operates isothermally the maximum conceivable work output is equal to the difference between the Gibbs free energy of the incoming reactants and that of the leaving products, nevertheless, even if the cell operates isothermally, the use of the conventional ΔG of reaction assumes that the products of reaction leave separately from one another (and from any unused fuel), and when ΔS of reaction is positive it assumes that a free heat source exists at the operating temperature, whereas if ΔS is negative it neglects the potential power which theoretically could be obtained form the heat released during oxidation. Moreover, the usual cell does not operate isothermally but (virtually) adiabatically

Urban liveability versus economic efficiency

DEFF Research Database (Denmark)

Farné Fratini, Chiara; Jensen, Jens Stissing

2013-01-01

development. Against this agenda a national strategy is currently being enforced which addresses water as a context-independent functional sector. This agenda operates with a narrow definition of economic efficiency in service provision through a benchmarking system focusing only on technical performances...... addresses the infrastructure as a discrete system - thus pushing for one-way influence of the infrastructure to the cityscape - the place based innovation agenda has traditionally been more inclusive towards the context specific priorities of urban planners. In this paper we apply the arena of development...

Toward Improved Rotor-Only Axial Fans—Part II: Design Optimization for Maximum Efficiency

DEFF Research Database (Denmark)

Sørensen, Dan Nørtoft; Thompson, M. C.; Sørensen, Jens Nørkær

2000-01-01

Numerical design optimization of the aerodynamic performance of axial fans is carried out, maximizing the efficiency in a designinterval of flow rates. Tip radius, number of blades, and angular velocity of the rotor are fixed, whereas the hub radius andspanwise distributions of chord length......, stagger angle, and camber angle are varied to find the optimum rotor geometry.Constraints ensure a pressure rise above a specified target and an angle of attack on the blades below stall. The optimizationscheme is used to investigate the dependence of maximum efficiency on the width of the design interval...

Dependence of US hurricane economic loss on maximum wind speed and storm size

International Nuclear Information System (INIS)

Zhai, Alice R; Jiang, Jonathan H

2014-01-01

Many empirical hurricane economic loss models consider only wind speed and neglect storm size. These models may be inadequate in accurately predicting the losses of super-sized storms, such as Hurricane Sandy in 2012. In this study, we examined the dependences of normalized US hurricane loss on both wind speed and storm size for 73 tropical cyclones that made landfall in the US from 1988 through 2012. A multi-variate least squares regression is used to construct a hurricane loss model using both wind speed and size as predictors. Using maximum wind speed and size together captures more variance of losses than using wind speed or size alone. It is found that normalized hurricane loss (L) approximately follows a power law relation with maximum wind speed (V max ) and size (R), L = 10 c V max a R b , with c determining an overall scaling factor and the exponents a and b generally ranging between 4–12 and 2–4 respectively. Both a and b tend to increase with stronger wind speed. Hurricane Sandy’s size was about three times of the average size of all hurricanes analyzed. Based on the bi-variate regression model that explains the most variance for hurricanes, Hurricane Sandy’s loss would be approximately 20 times smaller if its size were of the average size with maximum wind speed unchanged. It is important to revise conventional empirical hurricane loss models that are only dependent on maximum wind speed to include both maximum wind speed and size as predictors. (letters)

Industrial policy, production efficiency improvement and the Chinese county economic growth

Directory of Open Access Journals (Sweden)

Wang Zhenhua

2016-12-01

Full Text Available This study aims at analyzing the difference in the level of economic development between China’s counties from the two perspectives of industrial policy and production efficiency. Based on panel data of 1830 Chinese counties, this study employs the new classical economic growth theory framework to analyze the counties’ economic growth by the perpetual inventory method, Malmquist index, among others. The results show that the economy of the counties exhibits δ convergence since 2004, and the absolute differences in the different counties are expanding. Industrial policy ensures the additional deepening of the level of capital in the county. Additionally, a substantial difference was observed between the agricultural sector and the non-agricultural sector, whereby the total factor productivity and the technical efficiency are on the rise, resulting in the phenomenon of dual paths of technological progress. In summary, the capital deepening difference between the sectors, production efficiency, and dual paths of technological progress owing to the counties’ industrial policy are the basic reasons for the regional differences in the level of economic development in China.

The economic impacts of energy efficiency

International Nuclear Information System (INIS)

Jean, R.

1990-01-01

Hydro Quebec's energy efficiency initiatives are reviewed and the economic benefits it expects to garner from such programs are described. Energy efficiency programs affect the cost of supplying electricity, and rates usually rise during the early years and are subsequently offset by the benefits the program generates. Energy efficiency programs should allow Hydro Quebec to avoid $6 billion in expenditures for electricity supply, while entailing contributions of $1.4 billion for the efficiency measures. Evaluation of the potential for efficiency has allowed Hydro Quebec to set a target of 12.9 TWh/y in 1999 on a potential estimated at 18% of regular sales in Quebec in 1989, namely 23.3 TWh. Customers, who contribute $1.4 billion of their own funds to efficiency programs will realize savings of $3.2 billion. Hydro Quebec programs insist strongly on replacement of appliances and motors of all sorts, and in the residential sector, purchases of slightly less than $0.5 billion will consist of electric lamps (3%), water heaters (2.4%), insulation products (32%), hardware (2.5%), and various electric appliances (33%). In the commercial sector, expenditures will be higher, reaching ca $650 million. These are allocated to purchases of electric lamps (18%), heating equipment (12%), insulation products (24%), street lighting (4%), and various electric devices such as controls (39%). 2 figs., 4 tabs

Efficiency and economics of hydrogen delivery

International Nuclear Information System (INIS)

Liu, Y.; Bharadwaj, R.; Balan, C.; Garces, L.; Smith, D.

2003-01-01

The viability and penetration of fuel cell based electricity production will be mainly determined by the efficient, cost effective production and delivery of hydrogen. This study focuses on the transportation efficiency and cost of hydrogen delivery for both centrally produced hydrogen as well as electricity scenarios. The efficiency and economics of energy delivery depend on the quantity of energy to be transported and transportation distance. Energy delivery models were developed for Hydrogen delivery as compressed gas or cryogenic liquid using truck or pipeline. For comparison, models were also developed for high voltage AC electricity transmission. Major parameters that influence the performance of the energy transmission systems under normal operating conditions were modeled. The models use energy transported and delivery distance as independent variables. The results were validated against similar reports, government surveys and other publications. Energy delivery efficiency and costs were used to compare and evaluate the different delivery options. Effect of uncertainty and sensitivity of parameters on modeling results were also studied. The systems were compared on an equivalent basis. The analysis also identifies the trade-offs for electricity transmission and electrolysis application at the point of use for Hydrogen delivery. These results provide a consistent framework for evaluation of delivery options on energy efficiency basis. (author)

Government expenditure, efficiency and economic growth: a panel ...

African Journals Online (AJOL)

Finally Generalized Methods of Moments (GMM) is applied to answer the two research questions. The results demonstrate that increasing government expenditure accelerates economic growth of low income countries in Sub Saharan Africa. However, when government expenditure is interacted with government efficiency ...

Economic efficiency among small scale poultry farmers in Imo State ...

African Journals Online (AJOL)

... household size and extension, were found to be the significant factors that account for the observed variation in efficiency among the small scale poultry farmers. Keywords: economic efficiency, small scale poultry farmers, stochastic frontier production model. International Journal of Agriculture and Rural Development Vol.

Energy efficiency, sustainability and economic growth

International Nuclear Information System (INIS)

Ayres, Robert U.; Turton, Hal; Casten, Tom

2007-01-01

This paper explores two linked theses related to the role energy in economic development, and potential sources of increased energy efficiency for continued growth with reduced greenhouse gas (GHG) emissions. The first thesis is that, while reduced GHG emissions are essential for long-term global sustainability, the usual policy recommendation of increasing energy costs by introducing a carbon tax may be relatively ineffective under current market structures and have an unnecessarily adverse impact on economic growth. Our second thesis is that there exists a practical near-term strategy for reducing GHG emissions while simultaneously encouraging continued technology-driven economic growth. Moreover, this strategy does not require radical new technologies, but rather improved regulation or-more precisely-better deregulation of the electric power sector. In respect to the first of our two theses, this paper addresses a deficiency in neoclassical economic growth theory, in which growth is assumed to be automatic, inevitable and cost-free. We challenge both the assumption that growth will continue in the future at essentially the same rate ('the trend') as it has in the past, and the corollary that our children's children will inevitably be richer and better able to afford the cost of repairing the environmental damages caused by current generations [Simon et al., The state of humanity. Cambridge MA: Blackwell Publishers Ltd.; 1995

Unitary assessment of economical efficiency of the energy resources for electricity production in Romania

International Nuclear Information System (INIS)

Luca, Gheorghe

2004-01-01

In our country, within the studies, on which the development strategies of power output are based on, the assessment of the economical efficiency of the use of two main energetic resources, the fuel used in cogeneration thermal power plants and the water used in hydropower plants respectively, was made in compliance with non-unitary specific norms. In contradiction with the degree of utilization of hydroelectric resources, realized all over the world in the developed countries (80-90%) resulted that in our country, where the degree of utilization is only 40%, the use of hydroelectric potential is not yet justified from technical-economical point of view. This anomaly was determined by the cause of non-unitary assessment of the economic efficiency for the cogeneration thermo-power plants and hydropower plants. This paper presents comparatively the elements, which were to the basis of the assessment of the economic efficiency for two types of electrical power plants, and one presents a proposal in the aim to perform a unitary assessment of the economical efficiency by applying efficiently the laws in force. (author)

Defining the economic essence of definition «providing efficiency»

OpenAIRE

Kovalchyk, Olena Arnoldivna

2011-01-01

In paper the main approaches to defining the economic essence of the category of «efficiency» is analyzed. The existing conceptual approach to the term «providing» is investigated. The own point of view on the interpretation of definition «providing efficiency» is given.

Effects of irreversibility and economics on the performance of a heat engine

International Nuclear Information System (INIS)

Ibrahim, O.M.; Klein, S.A.; Mitchell, J.W.

1992-01-01

In this paper, optimization of the power output of an internally irreversible heat engine is considered for finite capacitance rates of the external fluid streams. The method of Lagrange multipliers is used to solve for working fluid temperatures which yield maximum power. Analytical expressions for the maximum power and the cycle efficiency at miximum power are obtained. The effects of irreversibility and economics on the performance of a heat engine are investigated. A relationship between the maximum power point and economically optimum design is identified. It is demonstrated that, with certain reasonable economic assumptions, the maximum power point of a heat engine corresponds to a point of minimum life-cycle costs

CONTRIBUTIONS OF MICROFINANCE INSTITUTIONS TO ECONOMIC EFFICIENCY OF CASSAVA FARMERS IN ABIA STATE, NIGERIA

Directory of Open Access Journals (Sweden)

Kingsley Chukwuemeka OBIKE

2014-10-01

Full Text Available The study examined contributions of microfinance institutions to economic efficiency of cassava farmers in Abia state, Nigeria. A multistage random sampling technique was adopted in collecting cross sectional data on a sample size of 240 respondents (120 MFI beneficiaries and 120 non beneficiaries. Primary Data was collected by administering questionnaire on cassava farmers. The result showed that economic efficiency of MFI beneficiaries was influenced by wage rate, price of fertilizer and adjusted Y (output, while wage rate, price of fertilizer and price of cassava cutting s are variables that influenced economic efficiency of non beneficiaries. The t – test analysis confirmed that MFI beneficiaries had higher economic efficiency advantage compared with non beneficiaries. It is recommended that government agricultural policy should take positive steps to reduce interest rate to encourage MFI efforts in providing the necessary platform to encourage higher efficiency in cassava production in Abia state, Nigeria.

Expansion of environmental impact assessment for eco-efficiency evaluation of China's economic sectors: An economic input-output based frontier approach.

Science.gov (United States)

Xing, Zhencheng; Wang, Jigan; Zhang, Jie

2018-09-01

Due to the increasing environmental burdens caused by dramatic economic expansion, eco-efficiency indicating how efficient the economic activity is with respect to its environmental impacts has become a topic of considerable interest in China. In this context, Economic Input-output Life Cycle Assessment (EIO-LCA) and Data Envelopment Analysis (DEA) are combined to assess the environmental impacts and eco-efficiency of China's 26 economic sectors. The EIO-LCA results indicate that Electricity Production and Supply sector is the largest net exporter in energy usage, CO 2 emission and exhaust emission categories, while Construction sector is the largest net importer for five impact categories except for water withdrawal. Moreover, Construction sector is found to be the destination of the largest sector-to-sector environmental impact flows for the five impact categories and make the most contributions to the total environmental impacts. Another key finding is that Agriculture sector is both the largest net exporter and the greatest contributor for water withdrawal category. DEA results indicate that seven sectors are eco-efficient while over 70% of China's economic sectors are inefficient and require significant improvements. The average target improvements range between 23.30% and 35.06% depending on the impact category. Further sensitivity analysis reveals that the average sensitivity ratios vary from 7.7% to 15.7% among the six impact categories, which are found to be negatively correlated with their improvement potentials. Finally, several policy recommendations are made to mitigate environmental impacts of China's economic sectors and improve their eco-efficiency levels. Copyright © 2018 Elsevier B.V. All rights reserved.

Economic efficiency in fish farming: hope for agro-allied industries in Niagara

Science.gov (United States)

Kareem, R. O.; Dipeolu, A. O.; Aromolaran, A. B.; Williams, S. B.

2008-02-01

The challenge to increase the efficiency in food production level in Nigeria appears to be more urgent now than it has ever been in the history of the country. This is in view of the rapidly increasing population, the imminent decline in international economic and food aid and the need to conserve foreign exchange earnings through the production of raw materials to feed the growing industrial sector calls for urgent attention. The study was carried out in Ogun State. The descriptive statistics was used to determine the socio-economic characteristics of the respondents. The stochastic frontiers production analysis was applied to estimate the technical, allocative efficiency and economic efficiency among the fish farmers in the state. The results of economic efficiency revealed that fish farming is economically efficient with a range of between 55% and 84% efficiency level suggesting a favourable hope for the agro-allied industry such as poultry and cottage industries etc in the state. The result of hypothesis of inefficiency sources models showed that years of experience of fish farmers is significant at 1% probability level indicating the factor contributing to the fish farming experience in the state. Thus, the efficiency is due to the fact that farmers are experienced and fairly educated. On the basis of findings, policy is suggested to be directed towards the encouragement of entrepreneurs in fish farming in the state by providing enabling environment like credit facilities, public enlightenment programme and provision of social amenities like feeder roads, pipe-born water etc and given the fact that an increase in the level of formal education variable leads to less inefficiency, government policy should be focused on adopting the best technology (e.g. fast growing species and equipment) so as to improve the level of efficiency and investment which shall eventually lead to growth in output of fish farming and a lead to the establishment of agro

Life cycle and economic efficiency analysis phase II : durable pavement markings.

Science.gov (United States)

2011-04-01

This report details the Phase II analysis of the life cycle and economic efficiency of inlaid tape : and thermoplastic. Waterborne paint was included as a non-durable for comparison purposes : only. In order to find the most economical product for sp...

Determining Factors for Economic Efficiency in the Organic Olive Oil Sector

Directory of Open Access Journals (Sweden)

Enrique Bernal Jurado

2017-05-01

Full Text Available Spain looms large worldwide in organic olive oil production. However, this productive potential contrasts with the low internal consumption of the product. This situation makes Spain a world leader in its export. Companies in this sector have clear deficiencies, which must be corrected to ensure their survival over time. In this context, the aim of this study is to analyse the level of efficiency, in economic terms, of organic olive oil producers and to identify the factors explaining the best organizational practices. To do so, Data Envelopment Analysis (DEA and Qualitative Comparative Analysis (QCA have been used. The results reveal low levels of economic efficiency and the variables determining said efficiency.

Efficient Photovoltaic System Maximum Power Point Tracking Using a New Technique

Directory of Open Access Journals (Sweden)

Mehdi Seyedmahmoudian

2016-03-01

Full Text Available Partial shading is an unavoidable condition which significantly reduces the efficiency and stability of a photovoltaic (PV system. When partial shading occurs the system has multiple-peak output power characteristics. In order to track the global maximum power point (GMPP within an appropriate period a reliable technique is required. Conventional techniques such as hill climbing and perturbation and observation (P&O are inadequate in tracking the GMPP subject to this condition resulting in a dramatic reduction in the efficiency of the PV system. Recent artificial intelligence methods have been proposed, however they have a higher computational cost, slower processing time and increased oscillations which results in further instability at the output of the PV system. This paper proposes a fast and efficient technique based on Radial Movement Optimization (RMO for detecting the GMPP under partial shading conditions. The paper begins with a brief description of the behavior of PV systems under partial shading conditions followed by the introduction of the new RMO-based technique for GMPP tracking. Finally, results are presented to demonstration the performance of the proposed technique under different partial shading conditions. The results are compared with those of the PSO method, one of the most widely used methods in the literature. Four factors, namely convergence speed, efficiency (power loss reduction, stability (oscillation reduction and computational cost, are considered in the comparison with the PSO technique.

The Economics of Ecosystems: Efficiency, Sustainability and Equity in Ecosystem Management

NARCIS (Netherlands)

Hein, L.G.

2010-01-01

The Economics of Ecosystems demonstrates how the concepts of economic efficiency, sustainability and equity can be applied in ecosystem management. The book presents an overview of these three key concepts, a framework for their analysis and modelling and three case studies. Specific attention is

Novel high efficient speed sensorless controller for maximum power extraction from wind energy conversion systems

International Nuclear Information System (INIS)

Fathabadi, Hassan

2016-01-01

Highlights: • Novel sensorless MPPT technique without drawbacks of other sensor/sensorless methods. • Tracking the actual MPP of WECSs, no tracking the MPP of their wind turbines. • Actually extracting the highest output power from WECSs. • Novel MPPT technique having the MPPT efficiency more than 98.5% for WECSs. • Novel MPPT technique having short convergence time for WECSs. - Abstract: In this study, a novel high accurate sensorless maximum power point tracking (MPPT) method is proposed. The technique tracks the actual maximum power point of a wind energy conversion system (WECS) at which maximum output power is extracted from the system, not the maximum power point of its wind turbine at which maximum mechanical power is obtained from the turbine, so it actually extracts the highest output power from the system. The technique only uses input voltage and current of the converter used in the system, and neither needs any speed sensors (anemometer and tachometer) nor has the drawbacks of other sensor/sensorless based MPPT methods. The technique has been implemented as a MPPT controller by constructing a WECS. Theoretical results, the technique performance, and its advantages are validated by presenting real experimental results. The real static-dynamic response of the MPPT controller is experimentally obtained that verifies the proposed MPPT technique high accurately extracts the highest instant power from wind energy conversion systems with the MPPT efficiency of more than 98.5% and a short convergence time that is only 25 s for the constructed system having a total inertia and friction coefficient of 3.93 kg m 2 and 0.014 N m s, respectively.

Technical Efficiency and Port Competition: Revisiting the Bohai Economic Rim, China

Directory of Open Access Journals (Sweden)

Grace Wang

2012-12-01

Full Text Available The Bohai Economic Rim plays an important role in supporting China’s economic growth. For this research, we selected nine main ports in the region to study whether intra-port competition or corporatization would improve efficiency. Using a panel fixed effect model and stochastic frontier model, we found that the technical efficiency of selected ports is significantly influenced by the time of the initial public offering than by regional competition. The results are supportive and encouraging for policy makers to move toward the decentralized port governance in China.

Economic innovation and efficiency gains as the driving force for accelerating carbon dioxide emissions

Science.gov (United States)

Garrett, T. J.

2012-12-01

It is normally assumed that gains in energy efficiency are one of the best routes that society has available to it for stabilizing future carbon dioxide emissions. For a given degree of economic productivity less energy is consumed and a smaller quantity of fossil fuels is required. While certainly this observation is true in the instant, it ignores feedbacks in the economic system such that efficiency gains ultimately lead to greater energy consumption: taken as a global whole, they permit civilization to accelerate its expansion into the energy reserves that sustain it. Here this argument is formalized from a general thermodynamic perspective. The core result is that there exists a fixed, time-independent link between a very general representation of global inflation-adjusted economic wealth (units currency) and civilization's total capacity to consume power (units energy per time). Based on 40 years of available statistics covering more than a tripling of global GDP and a doubling of wealth, this constant has a value of 7.1 +/- 0.01 Watts per one thousand 2005 US dollars. Essentially, wealth is power. Civilization grows by dissipating power in order to sustain all its current activities and to incorporate more raw material into its existing structure. Growth of its structure is related to economic production, so more energy efficient economic production facilitates growth. Growth is into the reserves that sustain civilization, in which case there is a positive feedback in the economic system whereby energy efficiency gains ultimately "backfire" if their intended purpose is to reduce energy consumption and carbon dioxide emissions. The analogy that can be made is to a growing child: a healthy child who efficiently incorporates food into her structure grows quickly and is able to consume more in following years. Economically, an argument is made that, for a range of reasons, there are good reasons to refer to efficiency gains as economic "innovation", both for

Energy efficiency: Key to solving economic, environmental problems

International Nuclear Information System (INIS)

Flanigan, T.

1991-01-01

Energy efficiency can boost economic development and competitiveness, maximize capital productivity, improve environmental quality, and guarantee lasting energy security. Each of these benefits is reason enough, but collectively they form an imperative for action. The energy future must be based on cultural development, not the wanton growth that has served as an indicator of success in the past. Energy efficiency provides not only technical fixes, regulatory innovation, and a host of new financing methods, it also provides a template - a model - for a resource-efficiency ethic congruent with the notion of respecting the rights of future citizens. The good news is that the authors now know how to check environmental despoliation caused by an unquenchable thirst for energy resources. Existing energy-efficiency opportunities allow them to redefine the national energy strategy and take account of the environment and the future

Economic efficiency of solar hot water policy in New Zealand

International Nuclear Information System (INIS)

Gillingham, Kenneth

2009-01-01

New Zealand has recently followed the path of several other countries in promoting solar hot water (SHW) systems in the effort to reduce greenhouse gas emissions, yet the economic efficiency of large-scale policies to encourage SHW remains a pressing question for policymakers. This paper develops an economic framework to examine policies to promote SHW in New Zealand, including the current information, training, and subsidy policy. The economic framework points to environmental, energy security, and average-cost electricity retail pricing market failures as motivation for SHW policy, with the global climate change externality the most important of these. The results indicate that domestic SHW systems are close to being financially attractive from a consumer perspective, but a more substantial subsidy policy would be necessary for SHW to appeal to a wider audience. Such a policy is far more likely to have positive net benefits than a policy of mandating SHW on all homes or all new homes in New Zealand, and could be justified on economic efficiency grounds under reasonable assumptions. However, this result reverses under an economy-wide carbon trading system that internalizes the environmental externality.

Efficient Use of Terrestrial Economic Services: A Case Study in South Korea

Science.gov (United States)

Nguyen, T. T.; Tenhunen, J.; Hoang, V. N.; Koellner, T.; Shin, H.; Pham, V. D.; Seo, B.

2012-04-01

Understanding the linkages between social and ecological systems is crucial for managing potential responses to global change. Agricultural production requires resources, is determined by ecological processes, and results in economic goods and services for society. However, production leads at the same time to both positive and negative externalities. The externalities can be enhanced or mitigated by human behavior in management, which is mainly driven by expectations related to economic gains and losses. Ecological and economic processes are interrelated, and continuously interact in a complex manner. Therefore, understanding potential economic gains and losses in response to global change is a fundamental consideration in order to carry out well-informed decision-making. The International Research and Training Group TERRECO at the University of Bayreuth has intensively investigated ecological systems and processes in forested and agricultural landscapes as well as at regional scale in South Korea. These ongoing efforts provide a unique opportunity to examine the economic gains, losses and trade-offs that may occur with future climate and land-use change. Within this framework, we first investigated the environmental and economic efficiency of rice farms in Kangwon Province of South Korea, since rice is the most important food crop in this country. We then expanded our analysis to include dry farm highland vegetable crops in an intensively farmed region of the country, Haean Catchment. Our main objectives are (1) to categorize different types of farms, (2) determine their economic and environmental efficiency, and (3) to determine the trade-offs that occur in economic and environmental efficiencies under alternative management schemes and alternative climate regimes. Our preliminary analysis for rice farms yielded several important findings. First, both the production cost and environmental pollution by rice farms could be reduced significantly. Improvements in

Operational safety performance and economical efficiency evaluation for nuclear power plants

International Nuclear Information System (INIS)

Liu Yachun; Zou Shuliang

2012-01-01

The economical efficiency of nuclear power includes a series of environmental parameters, for example, cleanliness. Nuclear security is the precondition and guarantee for its economy, and both are the direct embodiment of the social benefits of nuclear power. Through analyzing the supervision and management system on the effective operation of nuclear power plants, which has been put forward by the International Atomic Energy Agency (IAEA), the World Association of Nuclear Operators (WANO), the U.S. Nuclear Regulatory Commission (NRC), and other organizations, a set of indexs on the safety performance and economical efficiency of nuclear power are explored and established; Based on data envelopment analysis, a DEA approach is employed to evaluate the efficiency of the operation performance of several nuclear power plants, Some primary conclusion are achieved on the basis of analyzing the threshold parameter's sensitivity and relativity which affected operational performance. To address the conflicts between certain security and economical indicators, a multi-objective programming model is established, where top priority is given to nuclear safety, and the investment behavior of nuclear power plant is thereby optimized. (authors)

Efficiency improvement of the maximum power point tracking for PV systems using support vector machine technique

International Nuclear Information System (INIS)

Kareim, Ameer A; Mansor, Muhamad Bin

2013-01-01

The aim of this paper is to improve efficiency of maximum power point tracking (MPPT) for PV systems. The Support Vector Machine (SVM) was proposed to achieve the MPPT controller. The theoretical, the perturbation and observation (P and O), and incremental conductance (IC) algorithms were used to compare with proposed SVM algorithm. MATLAB models for PV module, theoretical, SVM, P and O, and IC algorithms are implemented. The improved MPPT uses the SVM method to predict the optimum voltage of the PV system in order to extract the maximum power point (MPP). The SVM technique used two inputs which are solar radiation and ambient temperature of the modeled PV module. The results show that the proposed SVM technique has less Root Mean Square Error (RMSE) and higher efficiency than P and O and IC methods.

The assessment of risk management system’s economic efficiency in retail banking

OpenAIRE

Cvilikas, Aurelijus; Paužuolis, Vaidas

2014-01-01

The banking risk management is always a relevant topic in financial sector’s academic literature, but the detailed analysis of current studies showed that there is a lack of studies in risk management’s economic efficiency assessment in retail banking, where the risk management system’s administration cost may be a significant part of total credit institution’s cost. The scientific problem of this article is: how the economic efficiency of retail banking risk management system could be ...

ECONOMIC EFFICIENCY IN TOMATOES PRODUCTION IN GREENHOUSES

Directory of Open Access Journals (Sweden)

A POPESCU

2003-07-01

Full Text Available This study aimed to appreciate the evolution of economic efficiency in tomatoes production in greenhouses within a private firm situated next to the capital. The firm owns 4 ha greenhouses and the weight of tomatoes crop in the cultivated area is just 38.75 %. In fact, during the last three years, the tomatoes cultivated surface has been diminished in favour of flowers production which, like tomatoes production is an important income source for any producer. The reduction of the tomatoes cultivated area was compensated by the increase of intensification grade using new high performance hybrids and modern technologies. Thus, the scientific production management has been looking for maintaining the total production at the same level from a year to another by an increased average tomatoes yield by 53.33 % . The continuous increase of farm input price has doubled the cost per surface unit and increased the cost per tomatoes kilogram by 33 %. The increase of tomatoes demand and of market price by 31 % have had a positive influence on the farm incomes which has doubled during the last three years. In the year 2000, the company has obtained USD 41,818 income/ha of which subtracting the related production cost we can easily get USD 4,815 profit/ha. The average profit rate recorded by the firm is 13 % in the period 2000-2002, when the study was made. As a conclusion, tomatoes production in greenhouses is a good deal. To keep a high economic efficiency, under the diminishing of the cultivated area, the producers have to increase average tomatoes production by using high performance technology based on high economic value hybrids.

Energy efficiency / economic in agroecosystems; Eficiencia energetica/economica em agroecossistemas

Energy Technology Data Exchange (ETDEWEB)

Almeida, Luis Carlos Ferreira de; Bueno, Osmar de Carvalho; Esperancini, Maura Seiko Tsutui [Universidade Estadual Paulista Julio de Mesquita Filho (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas

2010-07-01

The energy and economic evaluation of agroecosystems is important in the sense of appraise as maintainable these can be so much of the point of view energy as economic. The objective of the present paper was to show, starting from a case study, the construction of an indicator of energy/economic efficiency, whose results for four existent systems of corn production in the study area presented indexes that varied between 22.4 and 31.6. Of the reading of those values was possible to evaluate that all of the appraised systems show sustainability of long and short term. The proposed indicator if it shows solid in the agroecosystems appreciation concerning the analysis of your energy/economic sustainability. (author)

Practical Validation of Economic Efficiency Modelling Method for Multi-Boiler Heating System

Directory of Open Access Journals (Sweden)

Aleksejs Jurenoks

2017-12-01

Full Text Available In up-to-date conditions information technology is frequently associated with the modelling process, using computer technology as well as information networks. Statistical modelling is one of the most widespread methods of research of economic systems. The selection of methods of modelling of the economic systems depends on a great number of conditions of the researched system. Modelling is frequently associated with the factor of uncertainty (or risk, who’s description goes outside the confines of the traditional statistical modelling, which, in its turn, complicates the modelling which, in its turn, complicates the modelling process. This article describes the modelling process of assessing the economic efficiency of a multi-boiler adaptive heating system in real-time systems which allows for dynamic change in the operation scenarios of system service installations while enhancing the economic efficiency of the system in consideration.

On the economics of technology diffusion and energy efficiency

International Nuclear Information System (INIS)

Mulder, P.

2003-01-01

Energy is an essential factor that fuels economic growth and serves human well-being. World energy use has grown enormously since the middle of the 19th century. This increase in the scale of energy demand comes at a certain price, including environmental externalities, such as the enhanced greenhouse effect. Notwithstanding the need for renewable energy sources, these environmental problems also necessitate further improvements in energy efficiency. Technological change plays a crucial role in realizing energy efficiency improvements and, hence, in ameliorating the conflict between economic growth and environmental quality. At the same time, it is known that not only innovation, but also diffusion of new technologies is a costly and lengthy process, and that many firms do not invest in best-practice technologies. This study aims to contribute to a better understanding of the inter. play between economic growth, energy use and technological change, with much emphasis on the adoption and diffusion of energy-saving technologies. The thesis presents a mix of theoretical and empirical analyses inspired by recent developments in economic theorizing on technological change that stress the role of accumulation and distribution of knowledge (learning), uncertainty, path dependency and irreversibility. The theoretical part of the study examines how several characteristics of technological change as well as environmental policy affect the dynamics of technology choice. The empirical part of the study explores long-run trends in energy- and labour productivity performance across a range of OECD countries at a detailed sectoral level

The tolerance efficiency of Panicum maximum and Helianthus annuus in TNT-contaminated soil and nZVI-contaminated soil.

Science.gov (United States)

Jiamjitrpanich, Waraporn; Parkpian, Preeda; Polprasert, Chongrak; Laurent, François; Kosanlavit, Rachain

2012-01-01

This study was designed to compare the initial method for phytoremediation involving germination and transplantation. The study was also to determine the tolerance efficiency of Panicum maximum (Purple guinea grass) and Helianthus annuus (Sunflower) in TNT-contaminated soil and nZVI-contaminated soil. It was found that the transplantation of Panicum maximum and Helianthus annuus was more suitable than germination as the initiate method of nano-phytoremediation potting test. The study also showed that Panicum maximum was more tolerance than Helianthus annuus in TNT and nZVI-contaminated soil. Therefore, Panicum maximum in the transplantation method should be selected as a hyperaccumulated plant for nano-phytoremediation potting tests. Maximum tolerance dosage of Panicum maximum to TNT-concentration soil was 320 mg/kg and nZVI-contaminated soil was 1000 mg/kg in the transplantation method.

An Efficient UD-Based Algorithm for the Computation of Maximum Likelihood Sensitivity of Continuous-Discrete Systems

DEFF Research Database (Denmark)

Boiroux, Dimitri; Juhl, Rune; Madsen, Henrik

2016-01-01

This paper addresses maximum likelihood parameter estimation of continuous-time nonlinear systems with discrete-time measurements. We derive an efficient algorithm for the computation of the log-likelihood function and its gradient, which can be used in gradient-based optimization algorithms....... This algorithm uses UD decomposition of symmetric matrices and the array algorithm for covariance update and gradient computation. We test our algorithm on the Lotka-Volterra equations. Compared to the maximum likelihood estimation based on finite difference gradient computation, we get a significant speedup...

Economic efficiency of e-learning in higher education: An industrial approach

Directory of Open Access Journals (Sweden)

Jordi Vilaseca

2008-07-01

Full Text Available Little work has been yet done to analyse if e-learning is an efficiency way in economic terms to produce higher education, especially because there are not available data in official statistics. Despite of these important constrains, this paper aims to contribute to the study of economic efficiency of e-learning through the analysis of a sample of e-learning universities during a period of time (1997-2002. We have wanted to obtain some empirical evidence to understand if e-learning is a feasible model of providing education for universities and which are the variables that allow for feasibility attainment. The main findings are: 1 that the rise of the number of students enrolled is consistent with increasing labour productivity rates; 2 that cost labour savings are explained by the improvement of universities’ economic efficiency (or total factor productivity; and 3 that improvement of total factor productivity in e-learning production is due to the attainment of scale economies, but also to two organisational innovations: outsourcing processes that leads to the increase of variable costs consistent with decreasing marginal costs, and the sharing of assets’ control and use that allow for a rise in assets rotation.

Studies Concerning the Economic Efficiency and Quality of the Vegetal Sausages

Directory of Open Access Journals (Sweden)

Claudiu Dan Salagean

2014-05-01

Full Text Available The purpose of performed research aimed to establish the influence of protein supplements on the quality and economic efficiency in the processing of a certain semi-smoked sausage assortment using two experimental processing technologies: with 3% soy protein derivatives as supplements and 100% soy protein derivatives as vegetal raw materials. The results revealed that, from an economical point of view, the vegetal processing technology (with exclusively vegetal raw materials was more efficiently than the supplemented processing technology (with protein derivatives as supplements and from qualitatively point of view, the obtained values have been in accordance with the in force STAS-es.

Economic analysis of Brazilian policies for energy efficient electric motors

International Nuclear Information System (INIS)

Andrade, Cássio Tersandro de Castro; Pontes, Ricardo Silva Thé

2017-01-01

Brazil is leading several energy efficiency initiatives and has ambitious goals for 2030, according to the Brazilian National Energy Plan 2030. One of the main initiatives is the minimum efficiency performance standards (MEPS) program for energy-driven equipment and the electric motors appear as the most significant one (49% share of the total electricity consumption). The MEPS levels set new grades for efficiency, and then manufacturers and consumers have to conform to the new products and costs. Policy makers have to economically assess the effects of these MEPS in order to maintain the market stability. Since the benefits of this program come from future energy savings, this cost-effective analysis has to consider the parameters uncertainty and the results should reinforce the market players’ confidence. Thus, the goal of this work is, first, to analyze the economic viability of the MEPS transitions in Brazil considering the uncertainty of the parameters involved and then, to estimate the effects of this program on the energy savings goals for 2030. At the end, we also verify whether this investment in energy efficiency is competitive with other forms of investments in energy. - Highlights: • A cost-effectiveness method with uncertainty for efficiency program is presented. • Savings from electric motors MEPS program makes the 2030 Brazilian goals possible. • Electric motors MEPS program cost-effectiveness in Brazil is confirmed. • Saved energy cost from efficiency improvement is a competitive energy investment.

A data envelope analysis to assess factors affecting technical and economic efficiency of individual broiler breeder hens.

Science.gov (United States)

Romero, L F; Zuidhof, M J; Jeffrey, S R; Naeima, A; Renema, R A; Robinson, F E

2010-08-01

This study evaluated the effect of feed allocation and energetic efficiency on technical and economic efficiency of broiler breeder hens using the data envelope analysis methodology and quantified the effect of variables affecting technical efficiency. A total of 288 Ross 708 pullets were placed in individual cages at 16 wk of age and assigned to 1 of 4 feed allocation groups. Three of them had feed allocated on a group basis with divergent BW targets: standard, high (standard x 1.1), and low (standard x 0.9). The fourth group had feed allocated on an individual bird basis following the standard BW target. Birds were classified in 3 energetic efficiency categories: low, average, and high, based on estimated maintenance requirements. Technical efficiency considered saleable chicks as output and cumulative ME intake and time as inputs. Economic efficiency of feed allocation treatments was analyzed under different cost scenarios. Birds with low feed allocation exhibited a lower technical efficiency (69.4%) than standard (72.1%), which reflected a reduced egg production rate. Feed allocation of the high treatment could have been reduced by 10% with the same chick production as the standard treatment. The low treatment exhibited reduced economic efficiency at greater capital costs, whereas high had reduced economic efficiency at greater feed costs. The average energetic efficiency hens had a lower technical efficiency in the low compared with the standard feed allocation. A 1% increment in estimated maintenance requirement changed technical efficiency by -0.23%, whereas a 1% increment in ME intake had a -0.47% effect. The negative relationship between technical efficiency and ME intake was counterbalanced by a positive correlation of ME intake and egg production. The negative relationship of technical efficiency and maintenance requirements was synergized by a negative correlation of hen maintenance and egg production. Economic efficiency methodologies are effective

Economic efficiency of extensive livestock production in the European Union

Directory of Open Access Journals (Sweden)

Nastić Lana

2017-01-01

Full Text Available Various types of extensive livestock production are present worldwide, primarily in regions where natural resources such as pastures and meadows could be used. Extensive livestock production is common in the EU, as well. Therefore the goal of this research was to establish economic efficiency of extensive livestock production types and to compare their efficiency with some intensive livestock production types. In order to achieve that goal FADN (Farm Accountancy Data Network methodology was used. Source of information was FADN database as well as appropriate sector analysis and publications of European commission. It has been determined that sheep and goat production is competitive with intensive production types (dairy and granivores - pigs and poultry. Cattle production (other than dairy production proved to be economically inefficient due to low output level.

An efficient implementation of maximum likelihood identification of LTI state-space models by local gradient search

NARCIS (Netherlands)

Bergboer, N.H.; Verdult, V.; Verhaegen, M.H.G.

2002-01-01

We present a numerically efficient implementation of the nonlinear least squares and maximum likelihood identification of multivariable linear time-invariant (LTI) state-space models. This implementation is based on a local parameterization of the system and a gradient search in the resulting

Efficiency improvement for a sustainable agriculture : the integration of agronomic and farm economics approaches

NARCIS (Netherlands)

Koeijer, de T.J.

2002-01-01

Keywords: Sustainable farming systems, Agronomic efficiency, Economic efficiency, Environmental efficiency, Sustainability index, Interdisciplinary analysis.

The objective of the research described in this thesis was to determine what role improved agronomic efficiency can play in

ECONOMIC EFFICIENCY OF VARIOUS QUEEN BEES MAINTENANCE SYSTEMS

Directory of Open Access Journals (Sweden)

A POPESCU

2003-10-01

Full Text Available The modern queens maintenance systems are based on the use of artificial insemination, queens’ maintenance in the so called „queens bank” , in this way assuring an increased economic efficiency in beekeeping. This study aimed to compare the economic efficiency of the implementation of A.I. to various queen bees maintenance systems. Three alternatives have been taken into account: V1-a queen bee in a cage together with her bees, V2- a queen bank system and V3 – a queen bee in a nucleus. For each queen bee maintenance alternative have been evaluated the most important indicators such as: expenses, incomes, profit, number of marketable inseminated and selected queen bees, honey production, cost/queen, revenue/queen, profit/queen, profit rate. The most effective alternative was the queen bank system assuring 2,400 marketable queen bees and 20 kg honey delivered yearly, USD 12,442 incomes, USD 3,400 expenses, USD 9,042 profit, that is USD 3.77/queen bee and 265.72 % profit rate under the condition as A.I. costs are just USD 1,058, representing 31.1 % of total queen bees maintenance costs.

Implementing energy efficient pavements: A socio-economic analysis of the development and implementation of energy efficient pavements with low rolling resistance

DEFF Research Database (Denmark)

Axelsen, Christian; Pettinari, Matteo; Schmidt, Bjarne

2017-01-01

for the transportation sector is to make road networks more energy efficient by implementing pavements with low rolling resistance, leading to lower fuel consumption. Through a series of projects focusing on reducing rolling resistance conducted since 2010, the Danish Road Directorate (DRD) has developed a durable......, energy-efficient asphalt pavement. Socio-economic analyses conducted to quantify the benefit to society associated with implementing these asphalt pavements have demonstrated very high benefits. The demonstrated results in terms of durability, energy efficiency and socio-economics have resulted...... in substantial government funding being provided for demonstration trials on 50 kilometers of energy-efficient pavement in 2018. The implementation of energy-efficient pavements will enable Denmark to contribute to the out-of-quota 2030-emission cuts in line with EU regulations....

Increasing the Economical Efficiency and Sustainability of Indoor Fish Farming by Means of Aquaponics - Review

Directory of Open Access Journals (Sweden)

Flavius Blidariu

2011-10-01

Full Text Available This review focuses on increasing economical efficiency and sustainability of indoor fish farming. Aspects like sustainability and economical efficiency were reviewed. In order to improve man`s health we must reconsider the agricultural sciences, by this we understand that we must develop technologies friendly for the environment. Sustainable indoor fish farming is the farming of the new millennium. Combining aquaculture with hydroponics we obtain a new innovation named aquaponics which respects principles of sustainable agriculture (wastewater biofiltration by plants and gives us the possibility to increase economical efficiency with an additional production (organic vegetables.

Economic Efficiency, Allen / Uzama and Morishima Elasticities of Smallholder Agriculture In Dedza District, Malawi

Directory of Open Access Journals (Sweden)

Assa MAGANGA

2013-06-01

Full Text Available This paper is an attempt to measure the economic efficiency of Dedza smallholder Irish potato (Solanum tuberosum farmers in Malawi using a translog cost frontier, inefficiency effect model and input Elasticities from Seeming Unrelated Regression Model for asystem of cost share equations for labour, fertilizer, seed and land. A sample of 200 farmers has been considered from Dedza district in Malawi. Results indicate that the mean economic efficiency of Irish potato production in Dedza District is 0.61 with scores ranging between 0.12 and 0.94. The economic efficiency differences are significantly explained by non-farm employment, education, credit access, farm experience, degree of specialization, household size and frequency of weeding. The highest input substitution existed between labour and fertilizer, followed by seedfertilizer.

Build, renovate and invest economically - Efficiency and economic viability in harmony

International Nuclear Information System (INIS)

Meier, R.; Beck, M.; Previdoli, P.

2002-01-01

This book presents 13 papers that provide the latest know-how on energy economics in the building area. The authors show the importance of information and knowledge transfer when using new energy technologies. The topics covered include the role of the Swiss research programme on energy economy fundamentals, indicator systems for sustainability factors and energy characteristics of buildings. Also a discussion of the question 'rebuild or renovate', as well a series of articles about low-flow mechanical ventilation and the marketing of low-energy consumption building concepts are presented. Further articles cover the marketing of thermal solar systems as well as technology dissemination and monitoring. Also, the marginal costs of energy efficiency measures and the potential for energy savings and environmental management in trade and industry are discussed. Finally, two papers deal with the application of Swiss SIA building standards as well as technical developments and energy efficiency in the building and renovation areas

EXPRESSION OF THE TRANSPORT SECTOR OPERATIONAL EFFICIENCY EVALUATION METHODOLOGY (TRENDS AT DIFFERENT STAGES OF THE ECONOMIC CYCLE

Directory of Open Access Journals (Sweden)

Deimena KIYAK

2017-12-01

Full Text Available It is important to evaluate the impact of economic fluctuations on the transport sector operational efficiency, since such an analysis is a source of economic information which contributes to the identification of the sector's potential and advantages, the establishment of the risky areas of activity, and the exploration of the opportunities to increase its effectiveness. The aim of the study was to apply mathematical evaluation methods to the exploration of the operational efficiency of the Lithuanian transport sector companies and, based on the outcomes, to validate the opportunity of predicting a potential change of the economic cycle. The operational efficiency of the Lithuanian transport sector was analysed in the context of the cyclical national economy, and not in individual economic boom or recession periods, as that allowed for more detailed evaluation of the specific activities of the sector and its impact on Lithuanian economy. To achieve the aim, three different stages of the economic cycle in Lithuania were identified, and calculations were made during them. Based on the aggregate financial data, four different economic efficiency indicators were developed that reflected the efficiency level of the entire transport sector, and the sensitivity of the transport sector to economic fluctuations was identified. The comparison of the changes in the transport sector and in Lithuanian economy made it obvious that the level of the sector's operational efficiency could be regarded as a leading indicator of the economic cycle.

Spatio-Temporal Convergence of Maximum Daily Light-Use Efficiency Based on Radiation Absorption by Canopy Chlorophyll

Science.gov (United States)

Zhang, Yao; Xiao, Xiangming; Wolf, Sebastian; Wu, Jin; Wu, Xiaocui; Gioli, Beniamino; Wohlfahrt, Georg; Cescatti, Alessandro; van der Tol, Christiaan; Zhou, Sha; Gough, Christopher M.; Gentine, Pierre; Zhang, Yongguang; Steinbrecher, Rainer; Ardö, Jonas

2018-04-01

Light-use efficiency (LUE), which quantifies the plants' efficiency in utilizing solar radiation for photosynthetic carbon fixation, is an important factor for gross primary production estimation. Here we use satellite-based solar-induced chlorophyll fluorescence as a proxy for photosynthetically active radiation absorbed by chlorophyll (APARchl) and derive an estimation of the fraction of APARchl (fPARchl) from four remotely sensed vegetation indicators. By comparing maximum LUE estimated at different scales from 127 eddy flux sites, we found that the maximum daily LUE based on PAR absorption by canopy chlorophyll (ɛmaxchl), unlike other expressions of LUE, tends to converge across biome types. The photosynthetic seasonality in tropical forests can also be tracked by the change of fPARchl, suggesting the corresponding ɛmaxchl to have less seasonal variation. This spatio-temporal convergence of LUE derived from fPARchl can be used to build simple but robust gross primary production models and to better constrain process-based models.

Analysis of economic efficiency in cocoa production in Ghana ...

African Journals Online (AJOL)

The main purpose of this study was to analyze the economic efficiency of resource utilization in cocoa production of the cocoa farmers in Ghana to provide information for effective application and management of farm inputs on cocoa farms and policy recommendation. A random sample of 300 farmers in the Eastern, Ashanti ...

Economic efficiency of cocoa production in Ghana | Aneani | Journal ...

African Journals Online (AJOL)

The main purpose of this study was to analyze the economic efficiency of resource utilization in cocoa production among cocoa farmers in Ghana to provide information for effective application and management of farm input on cocoa farms. A random sample of 300 farmers was selected in six cocoa growing districts in ...

Discussion on Boiler Efficiency Correction Method with Low Temperature Economizer-Air Heater System

Science.gov (United States)

Ke, Liu; Xing-sen, Yang; Fan-jun, Hou; Zhi-hong, Hu

2017-05-01

This paper pointed out that it is wrong to take the outlet flue gas temperature of low temperature economizer as exhaust gas temperature in boiler efficiency calculation based on GB10184-1988. What’s more, this paper proposed a new correction method, which decomposed low temperature economizer-air heater system into two hypothetical parts of air preheater and pre condensed water heater and take the outlet equivalent gas temperature of air preheater as exhaust gas temperature in boiler efficiency calculation. This method makes the boiler efficiency calculation more concise, with no air heater correction. It has a positive reference value to deal with this kind of problem correctly.

The economic efficiency of allowing longer combination vehicles in Texas.

Science.gov (United States)

2011-08-01

This paper shows the economic efficiency of allowing longer combination vehicles in Texas. First, an : overview of the truck size and weight policies is explained, with an emphasis on those that affect : Texas. Next, LCV operations in other countries...

Energy, exergy, economic and environmental (4E) analysis of a solar desalination system with humidification-dehumidification

International Nuclear Information System (INIS)

Deniz, Emrah; Çınar, Serkan

2016-01-01

Highlights: • Possibility of suppling all energy consumption from solar energy was tested. • Air and water-heated humidification-dehumidification desalination system was proposed. • Energy, exergy, economic and environmental analysis were performed. • Productivity and performance of the desalination system was analyzed. • Various operational parameters were investigated. - Abstract: A novel humidification-dehumidification (HDH) solar desalination system is designed and tested with actual conditions and solar energy was used to provide both thermal and electrical energy. Energy-exergy analyses of the system are made and economic and enviro-economic properties are investigated using data obtained from experimental studies. In this way, economic and environmental impacts of the HDH solar desalination systems have also been determined. The maximum daily energy efficiency of the system was calculated as 31.54% and the maximum exergy efficiency was found as 1.87%. The maximum fresh water production rate is obtained as 1117.3 g/h. The estimated cost of fresh water produced through the designed HDH system is 0.0981 USD/L and enviro-economic parameter is 2.4041 USD/annum.

ANALYSIS OF ECONOMIC EFFICIENCY IN BROILERS FATTENING

Directory of Open Access Journals (Sweden)

L. SABAU

2009-05-01

Full Text Available The paper aimed to analyze economic efficiency in broilers fattening . In this purpose , the study was carried out at Breading Prod Commercial Company, Giarmata, Timis County . The economic and financial results of two series of broilers fattening have been comparatively analyzed based on the following specific indicators variable costs ( one day chicken supply , medicines, disinfectants , veterinary services , straw bed, feeding, fuels, electricity , watering , labor force , fixed costs ( rent, interest, fixed assets depreciation , communication and other taxes , total production costs , cost per marketed broiler, cost per square meter , cost per kg live weight , gross margin , incomes ( incomes coming from marketed broilers and subsidies , profit, profit rate , profit per marketed broiler, profit per square meter, profit per kg live weight , costs to 1,000 incomes and incomes to 1,000 costs. This comparison proved that the higher the chickens series size , the higher costs and incomes . The both fatenning series have profitable but the series S2 registered lower financial performances .

Efficiency, equity or disagreement? The economics of international carbon abatement negotiations

International Nuclear Information System (INIS)

Mabey, N.; Smith, C.

1995-01-01

The current international effort to reduce greenhouse gas emissions, as embodied in the Framework Convention on Climate Change, is often criticized as inefficient by economists because it uses uniform targets instead of more theoretically efficient instruments such as international taxes. However, the effectiveness of any international treaty in producing environmental benefits is not wholly dependent on its economic efficiency but also on its political stability and the ability to accurately monitor and enforce its conditions. Stability depends on the magnitude and distribution of costs and benefits between countries which have heterogeneous economies, environmental damages, trading partners and abatement costs. The distribution of costs between countries will also depend on the type of policy instrument used to coordinate international abatement efforts. This paper analyses trade-offs that must be made when negotiating international agreements in order to balance the need for administrative convenience and economic efficiency with the realization that any agreement is better than no agreement

The economics of energy efficiency for the poor--a South African case study

International Nuclear Information System (INIS)

Spalding-Fecher, Randall; Clark, Alix; Davis, Mark; Simmonds, Gillian

2002-01-01

South Africa's Reconstruction and Development Programme set ambitious goals for providing basic services to all, including housing and electrification. More efficient use of energy has the potential to socially and politically support these goals, particularly when it is targeted at low-income communities lacking adequate energy services. This paper examines the economics of energy efficiency for the urban poor from the perspective of society, utilities and poor consumers, using five example programmes. While the five energy efficiency programmes generally have significant economic and environmental benefits from a social perspective, they may not be as attractive to utilities and consumers. Also examined are the policy options for overcoming the significant barriers to energy efficiency, and ways government can bridge the gap between what is good for society and what is good for the electricity industry

Economic analysis

Energy Technology Data Exchange (ETDEWEB)

None

1980-06-01

The Energy Policy and Conservation Act (EPCA) mandated that minimum energy efficiency standards be established for classes of refrigerators and refrigerator-freezers, freezers, clothes dryers, water heaters, room air conditioners, home heating equipment, kitchen ranges and ovens, central air conditioners, and furnaces. EPCA requires that standards be designed to achieve the maximum improvement in energy efficiency that is technologically feasible and economically justified. Following the introductory chapter, Chapter Two describes the methodology used in the economic analysis and its relationship to legislative criteria for consumer product efficiency assessment; details how the CPES Value Model systematically compared and evaluated the economic impacts of regulation on the consumer, manufacturer and Nation. Chapter Three briefly displays the results of the analysis and lists the proposed performance standards by product class. Chapter Four describes the reasons for developing a baseline forecast, characterizes the baseline scenario from which regulatory impacts were calculated and summarizes the primary models, data sources and assumptions used in the baseline formulations. Chapter Five summarizes the methodology used to calculate regulatory impacts; describes the impacts of energy performance standards relative to the baseline discussed in Chapter Four. Also discussed are regional standards and other program alternatives to performance standards. Chapter Six describes the procedure for balancing consumer, manufacturer, and national impacts to select standard levels. Details of models and data bases used in the analysis are included in Appendices A through K.

Economic Reforms and Cost Efficiency of Coffee Farmers in Central ...

African Journals Online (AJOL)

We, therefore, conclude that small-holder-based agricultural development policy is still relevant and an efficient mode of organising production in Kenya, even after the major institutional and economic changes brought about market liberalisation. The pursuit of small-holder-based agricultural development, however, calls ...

Economic Efficiency Assessment of Autonomous Wind/Diesel/Hydrogen Systems in Russia

Directory of Open Access Journals (Sweden)

O. V. Marchenko

2013-01-01

Full Text Available The economic efficiency of harnessing wind energy in the autonomous power systems of Russia is analyzed. Wind turbines are shown to be competitive for many considered variants (groups of consumers, placement areas, and climatic and meteorological conditions. The authors study the possibility of storing energy in the form of hydrogen in the autonomous wind/diesel/hydrogen power systems that include wind turbines, diesel generator, electrolyzer, hydrogen tank, and fuel cells. The paper presents the zones of economic efficiency of the system (set of parameters that provide its competitiveness depending on load, fuel price, and long-term average annual wind speed. At low wind speed and low price of fuel, it is reasonable to use only diesel generator to supply power to consumers. When the fuel price and wind speed increase, first it becomes more economical to use a wind-diesel system and then wind turbines with a hydrogen system. In the latter case, according to the optimization results, diesel generator is excluded from the system.

Tracking the maximum efficiency point for the FC system based on extremum seeking scheme to control the air flow

International Nuclear Information System (INIS)

Bizon, Nicu

2014-01-01

Highlights: • The Maximum Efficiency Point (MEP) is tracked based on air flow rate. • The proposed Extremum Seeking (ES) control assures high performances. • About 10 kW/s search speed and 99.99% stationary accuracy can be obtained. • The energy efficiency increases with 3–12%, according to the power losses. • The control strategy is robust based on self-optimizing ES scheme proposed. - Abstract: An advanced control of the air compressor for the Proton Exchange Membrane Fuel Cell (PEMFC) system is proposed in this paper based on Extremum Seeking (ES) control scheme. The FC net power is mainly depended on the air and hydrogen flow rate and pressure, and heat and water management. This paper proposes to compute the optimal value for the air flow rate based on the advanced ES control scheme in order to maximize the FC net power. In this way, the Maximum Efficiency Point (MEP) will be tracked in real time, with about 10 kW/s search speed and a stationary accuracy of 0.99. Thus, energy efficiency will be close to the maximum value that can be obtained for a given PEMFC stack and compressor group under dynamic load. It is shown that the MEP tracking allows an increasing of the FC net power with 3–12%, depending on the percentage of the FC power supplied to the compressor and the level of the load power. Simulations shows that the performances mentioned above are effective

Analysis of remote working practice AND CALCULATION OF ECONOMIC EFFICIENCY

Directory of Open Access Journals (Sweden)

K. S. Ermakov

2015-01-01

Full Text Available The article is devoted to description of working from home practice at Allianz Insurance UK и Ernst & Young, UK & Ireland. It fulfilled the analysis of the best practices in the use of new forms of social and labor relations - remote work. The characteristics of using types of distance work, the policy of implementation and realization of such work in the company, the criteria for the transfer of employees to work remotely, the possibility of a flexible approach to workflow are given. The calculation of the economic efficiency of technology telecommuting at an aviation company of the Russian Federation is done. The method of calculating the cost-effectiveness based on several factors, such as costs for the organization and content of the workplace, change in labor productivity and others, was proposed by the authors. The calculation of economic efficiency by using the number of working hours, the impact on capital inputs and the impact on quit rates is considered.

Efficiency improvement for a sustainable agriculture : the integration of agronomic and farm economics approaches

OpenAIRE

Koeijer, de, T.J.

2002-01-01

Keywords: Sustainable farming systems, Agronomic efficiency, Economic efficiency, Environmental efficiency, Sustainability index, Interdisciplinary analysis.

The objective of the research described in this thesis was to determine what role improved agronomic efficiency can play in the transition towards more sustainable production systems. Agronomic efficiency measures the technical performance. If it could be improved, environmental damage could be reduced while, at the sam...

Economic efficiency and risk character of fire management programs, Northern Rocky Mountains

Science.gov (United States)

Thomas J. Mills; Frederick W. Bratten

1988-01-01

Economic efficiency and risk have long been considered during the selection of fire management programs and the design of fire management polices. The risk considerations was largely subjective, however, and efficiency has only recently been calculated for selected portions of the fire management program. The highly stochastic behavior of the fire system and the high...

Hydraulic limits on maximum plant transpiration and the emergence of the safety-efficiency trade-off.

Science.gov (United States)

Manzoni, Stefano; Vico, Giulia; Katul, Gabriel; Palmroth, Sari; Jackson, Robert B; Porporato, Amilcare

2013-04-01

Soil and plant hydraulics constrain ecosystem productivity by setting physical limits to water transport and hence carbon uptake by leaves. While more negative xylem water potentials provide a larger driving force for water transport, they also cause cavitation that limits hydraulic conductivity. An optimum balance between driving force and cavitation occurs at intermediate water potentials, thus defining the maximum transpiration rate the xylem can sustain (denoted as E(max)). The presence of this maximum raises the question as to whether plants regulate transpiration through stomata to function near E(max). To address this question, we calculated E(max) across plant functional types and climates using a hydraulic model and a global database of plant hydraulic traits. The predicted E(max) compared well with measured peak transpiration across plant sizes and growth conditions (R = 0.86, P efficiency trade-off in plant xylem. Stomatal conductance allows maximum transpiration rates despite partial cavitation in the xylem thereby suggesting coordination between stomatal regulation and xylem hydraulic characteristics. © 2013 The Authors. New Phytologist © 2013 New Phytologist Trust.

Energy efficiency, human behavior, and economic growth: Challenges to cutting energy demand to sustainable levels

Science.gov (United States)

Santarius, Tilman

2015-03-01

Increasing energy efficiency in households, transportation, industries, and services is an important strategy to reduce energy service demand to levels that allow the steep reduction of greenhouse gases, and a full fledged switch of energy systems to a renewable basis. Yet, technological efficiency improvements may generate so-called rebound effects, which may `eat up' parts of the technical savings potential. This article provides a comprehensive review of existing research on these effects, raises critiques, and points out open questions. It introduces micro-economic rebound effect and suggests extending consumer-side analysis to incorporate potential `psychological rebound effects.' It then discusses meso-economic rebound effects, i.e. producer-side and market-level rebounds, which so far have achieved little attention in the literature. Finally, the article critically reviews evidence for macro-economic rebound effects as energy efficiency-induced economic growth impacts. For all three categories, the article summarizes assessments of their potential quantitative scope, while pointing out remaining methodological weaknesses and open questions. As a rough "rule of thumb", in the long term and on gross average, only half the technical savings potential of across-the-board efficiency improvements may actually be achieved in the real world. Policies that aim at cutting energy service demand to sustainable levels are well advised to take due note of detrimental behavioral and economic growth impacts, and should foster policies and measures that can contain them.

Modelling of Efficiency Change as a Source of Economic Growth in Agriculture

Directory of Open Access Journals (Sweden)

Bezat-Jarzębowska Agnieszka

2016-12-01

Full Text Available In the paper, the subject of economic growth in agriculture was raised. One of the determinants of this process, namely an efficiency change was under the assessment. The aim of the paper was to evaluate the changes of efficiency in the Polish agriculture. In the study, a stochastic parametric production function was used.

Water Market-scale Agricultural Planning: Promoting Competing Water Resource Use Efficiency Through Agro-Economics

Science.gov (United States)

Delorit, J. D.; Block, P. J.

2017-12-01

Where strong water rights law and corresponding markets exist as a coupled econo-legal mechanism, water rights holders are permitted to trade allocations to promote economic water resource use efficiency. In locations where hydrologic uncertainty drives the assignment of annual per-water right allocation values by water resource managers, collaborative water resource decision making by water rights holders, specifically those involved in agricultural production, can result in both resource and economic Pareto efficiency. Such is the case in semi-arid North Chile, where interactions between representative farmer groups, treated as competitive bilateral monopolies, and modeled at water market-scale, can provide both price and water right allocation distribution signals for unregulated, temporary water right leasing markets. For the range of feasible per-water right allocation values, a coupled agricultural-economic model is developed to describe the equilibrium distribution of water, the corresponding market price of water rights and the net surplus generated by collaboration between competing agricultural uses. Further, this research describes a per-water right inflection point for allocations where economic efficiency is not possible, and where price negotiation among competing agricultural uses is required. An investigation of the effects of water right supply and demand inequality at the market-scale is completed to characterize optimal market performance under existing water rights law. The broader insights of this research suggest that water rights holders engaged in agriculture can achieve economic benefits from forming crop-type cooperatives and by accurately assessing the economic value of allocation.

The Efficiency Opportunity Impact of Information Systems in an Organizational Economics Framework of Informatics

OpenAIRE

Kühn Pedersen, Mogens; Holm Larsen, Michael

2004-01-01

Information systems (IS) have a record of raising efficiency and effectiveness in business operations. In the modern economy, ongoing efficiency improvements through innovation play a decisive role. A new theory of distributed relations refocuses innovations comptence from core to distributed competence, raising new efficiency opportunities. The paper suggest an economic model of the efficiency op-portunities of information processing revealing the efficiency form of distributed relations, a ...

Problems of Development and Increase of Economic Efficiency of Sugar Beet Production

Directory of Open Access Journals (Sweden)

Tomashevska Olga A.

2017-06-01

Full Text Available The aim of the article is the studying of the trends of development and economic efficiency of sugar beet production (using the example of agricultural enterprises of Rokytne district of Kyiv region and an attempt to outline the directions for improvement of the situation in the sugar beet industry. As a result of the research, the dynamics of development and economic efficiency of sugar beet production at farms of Rokytne district of Kyiv region is analyzed, and the break-even volume of sugar beet production by agrarian enterprises of Kiev region and an individual enterprise of Rokytne district is determined. Particular attention is paid to the dynamics of profitability of sugar beet production in the period from 2011 to 2015. The main problems hindering the development of sugar beet production are identified, namely, the lack of sales channels and high production costs. Prospects for further research in this area are to increase the economic efficiency of sugar beet production and find ways to develop this sector, provided that the production is properly organized, the manufacturing process is followed, the fertilizers are properly used, the seeds are chosen correctly, advanced technologies and high-performance equipment are applied, etc.

Economic efficiency of application of innovative materials and structures in high-rise construction

Science.gov (United States)

Golov, Roman; Dikareva, Varvara; Gorshkov, Roman; Agarkov, Anatoly

2018-03-01

The article is devoted to the analysis of technical and economic efficiency of application of tube confined concrete structures in high-rise construction. The study of comparative costs of materials with the use of different supporting columns was carried out. The main design, operational, technological and economic advantages of the tube confined concrete technology were evaluated, conclusions were drawn about the high strength and deformation properties of axial compression of steel tubes filled with high-strength concrete. The efficiency of the tube confined concrete use is substantiated, which depends mainly on the scale factor and percentage of reinforcement affecting its load-bearing capacity.

International Comparison of Water Resources Utilization Efficiency in the Silk Road Economic Belt

Science.gov (United States)

Yan, Long; Ma, Jing; Deng, Wei; Wang, Yong

2018-03-01

In order to get knowledge of the standard of water utilization of the Silk Road Economic Belt from international point of view, the paper analyzes the annual variation of water resources utilization in the Silk Road Economic Belt, and compares with other typical countries. The study shows that Water resources utilization efficiency has been greatly improved in recent 20 years and the water consumption per USD 10000 of GDP has been declined 87.97%. the improvement of industrial water consumption efficiency is the key driving factors for substantial decrease in water consumption.The comparison of water utilization and human development shows that the higher HDI the country is, the more efficient water utilization the country has. water consumption per USD 10000 of GDP in country with HDI>0.9 is 194m³, being 8.5% of that in country with HDI from 0.5 to 0.6. On the premise of maintaining the stable economic and social development of the Silk Road Economic Belt, the realization of the control target of total water consumption must depend on the strict control over the disorderly expansion of irrigated area, the change in the mode of economic growth, the implementation of the development strategy for new industrialization and urbanization, vigorous development of the processing industry with low water consumption as well as the high-tech and high value-added industry. Only in this way, the control target of total water consumption can be realized in the process of completing the industrialization task.

Influences of economic development in the Brazilian energy efficiency projects

Directory of Open Access Journals (Sweden)

Javier Cárcel Carrasco

2012-09-01

Full Text Available This work has as main goal to present some of the issues regarding the effects of the Brazilian economy in the effectiveness of national energy efficiency projects in order to provide some guidelines for optimizing the energy saving actions. The replacement of traditional electric motors with high efficiency motors has been considered, or that brings innovation and increases the need to search for new technologies for Brazilian industries. We must consider whether this new paradigm requires a strong federal government's investment in Brazil in order to allow the implementation of energy efficiency programs, mainly in small and medium industries. This document is divided into three main parts. The first part deals with some aspects of the economic crisis. The second presents the most important data of the National Electricity Conservation (PROCEL and Energy Efficiency Program of the ANEEL (National Electric Energy Agency. The third shows data on Small and Medium Industries and how their energy efficiency programs were affected.

Gender and Relative Economic Efficiency in Sweet Potato Farms of ...

African Journals Online (AJOL)

This study employed the stochastic frontier cost function to measure the level of economic efficiency and its determinants in small-scale sweet potato production in Imo State, Nigeria on gender basis. A multi-stage random sampling technique was used to select 120 sweet potato farmers (64 females and 56 males) in the ...

Finance-economical indexes of efficiency of development of railway transport

Directory of Open Access Journals (Sweden)

M. Chekhovska

2012-12-01

Full Text Available Because of formation of public joint-stock company of railway transport of the common use, by an author it is suggested to carry out the analysis of efficiency of subsequent development of railway transport, leaning against indexes which represent the finance-economical constituent of results of activity of corporate enterprises.

The Rethinking of the Economic Activity Based on Principles of Eco-Efficiency

Directory of Open Access Journals (Sweden)

Daniela VÎRJAN

2011-07-01

Full Text Available Drought, floods, damaging storms, heat waves, acid rain, climate changes are but a few of the consequences of human action upon the environment. Can we possibly live against the environment? The answer is NO, and as such we must run an economy which respects the principles of eco-efficiency because only so can economic progress go on. Green economy is a great opportunity for all of the world’s countries, and is a real economy which keeps the resource-needs and environment relation in balance, aims towards quality and not quantity, lays emphasis on regeneration, recycling, reuse and creativity. Eco-efficiency implies both innovation towards a high degree of product dematerialization, services and systems, alongside with greatly changing current production and consumption practices. If we produce based on the principle of eco-efficiency we can reduce the effects of the profound economic, ecological, socio-political and cultural-spiritual crisis which marks our planet and countries.

Theoretical Grounds of Formation of the Efficient State Economic Policy

Directory of Open Access Journals (Sweden)

Semyrak Oksana S.

2013-12-01

Full Text Available The article conducts historical and analytical analysis of views on the role of state administration in the sphere of economic relations by various economic directions in order to allocate traditional and newest essential reference points of the modern theory of state regulation of economy. It identifies specific features of modern models of economic policy that envisage setting goals by the state, selection of relevant efficient tools and mathematic function, which would describe dependencies between them. It considers the concept of the basic theory of economic policy of Jan Tinbergen, its advantages and shortcomings. It studies prerequisites and conducts analysis of the modern concept of the role of state in economy as a subject of the market. It considers the modern concept of economic socio-dynamics, pursuant to which the main task of the state is maximisation of social usefulness and permanent improvement of the Pareto-optimal. It considers the “socio-dynamic multiplicator” notion, which envisages availability of three main components: social effect from activity of the state, yearning of individuals for creation of something new and availability of formal and informal institutions that united first two elements.

India's economic growth and energy consumption: scope for efficiency and conservation

International Nuclear Information System (INIS)

Yadav, S.S.

2000-01-01

Like all developing countries in general, India has very low per capita consumption of energy. But the consumption pattern per unit of economic output is high. There is a need to make efforts and evolve mechanism so that energy consumption growth rate decelerates while the desired economic growth takes place. In case of India, large imports of petroleum products impact very adversely on trade balance and consequently on economic growth itself. This paper enumerates various ways - legal, financial and technological - that should be adopted to increase energy efficiency and conservation effort. No single method or tool in isolation may be effective but an integrated approach involving several tools and mechanisms is sure to yield desired results. (author)

The Economic Efficiency of European Football Clubs--Data Envelopment Analysis (DEA) Approach

Science.gov (United States)

Pyatunin, Aleksey V.; Vishnyakova, Angelina B.; Sherstneva, Natalia L.; Mironova, Svetlana P.; Dneprov, Sergey A.; Grabozdin, Yuriy P.

2016-01-01

The relevance of this paper lies in the fact that football business has grown significantly in the past 20 years and football clubs have become large companies, which in an effort to be profitable and successful on the field need to improve the efficiency of their business. The aim of this article is to measure economic efficiency of 48 big…

Nuclear liability, nuclear safety, and economic efficiency

International Nuclear Information System (INIS)

Wood, W.C.

1980-01-01

This dissertation applies the methods of economic analysis to nuclear liability and Price-Anderson. First the legislative history is reviewed; in that history the economic role of liability in affecting safety and allocating risk was virtually ignored. Succeeding chapters reformulate issues from the policy debate and subject them to economic analysis. A persistent issue is whether nuclear utilities respond to their limited liability by allowing a higher probability of serious accident. Comparative-static analysis shows that limited liability does lead to a higher chance of accidents, though the effect may be small. The analysis also shows that safety is achieved in a more capital-intensive manner than is cost-minimizing and that limited liability causes reactor owners to favor more heavily populated sites for plants. Therefore, the siting decision makes potential loss greater even if there is no change in the probability of an accident. Citizens' preferences on nuclear liability are examined next, starting with the nature of coverage that would be just in the sense of contraction theories such as John Rawls' Theory of Justice. Citizens behind Rawls' veil of ignorance, forced to be fair because of their ignorance of whether they will be harmed, unanimously choose a high level of coverage. The just level of coverage is greater than the existing $560 million. Second, the nature of economically efficient liability coverage is determined and contrasted with coverage that would emerge from a democratic system of public choice. Population and expected damage profiles indicate that majorities could easily be formed among groups of citizens expecting to suffer little of the damage of a nuclear accident. Thus, majority voting on liability arrangements is likely to produce an inefficiently low level of coverage

Triple Helix Model as an Efficient Mechanism of Food Security Provision in Regional Economic Entities and the Economic System as a Whole

Directory of Open Access Journals (Sweden)

Mihail N. Dudin

2014-08-01

Full Text Available The leading countries of the world consider food security the important condition of internal political and social-economic stability of the state and its external independence. The topic of the article is crucial due to the fact that the problem of food security is rather complicated and multilevel and should be considered at different interrelated hierarchical levels. In this context the efficient model of food security is the result of the permanent dialogue between the representatives of the state government, business entities, social organizations and scientific institutions. The article justifies the fact that the model of innovation development, known as ‘the triple helix model’ should be applied at the modern stage of economic development as an efficient tool for the food security provision, which can be implemented in the activity of regional economic entities and the whole economic system of the Russian Federation.

Highly efficient maximum power point tracking using DC-DC coupled inductor single-ended primary inductance converter for photovoltaic power systems

Science.gov (United States)

Quamruzzaman, M.; Mohammad, Nur; Matin, M. A.; Alam, M. R.

2016-10-01

Solar photovoltaics (PVs) have nonlinear voltage-current characteristics, with a distinct maximum power point (MPP) depending on factors such as solar irradiance and operating temperature. To extract maximum power from the PV array at any environmental condition, DC-DC converters are usually used as MPP trackers. This paper presents the performance analysis of a coupled inductor single-ended primary inductance converter for maximum power point tracking (MPPT) in a PV system. A detailed model of the system has been designed and developed in MATLAB/Simulink. The performance evaluation has been conducted on the basis of stability, current ripple reduction and efficiency at different operating conditions. Simulation results show considerable ripple reduction in the input and output currents of the converter. Both the MPPT and converter efficiencies are significantly improved. The obtained simulation results validate the effectiveness and suitability of the converter model in MPPT and show reasonable agreement with the theoretical analysis.

Resource values in analyzing fire management programs for economic efficiency

Science.gov (United States)

Irene A. Althaus; Thomas J. Mills

1982-01-01

In analyzing fire management programs for their economic efficiency, it is necessary to assign monetary values to the changes in resource outputs caused by, fire. The derivation of resource values is complicated by imperfect or nonexistent commercial market structures. The valuation concept recommended for fire program analyses is willingness-to-pay because it permits...

Energy efficiency, human behavior, and economic growth: Challenges to cutting energy demand to sustainable levels

Energy Technology Data Exchange (ETDEWEB)

Santarius, Tilman, E-mail: tilman@santarius.de [Visiting Scholar, Institute of European Studies and Energy and Resources Group, University of California, Berkeley, 310 Barrows Hall, Berkeley, CA 94720-3050 (United States)

2015-03-30

Increasing energy efficiency in households, transportation, industries, and services is an important strategy to reduce energy service demand to levels that allow the steep reduction of greenhouse gases, and a full fledged switch of energy systems to a renewable basis. Yet, technological efficiency improvements may generate so-called rebound effects, which may ‘eat up’ parts of the technical savings potential. This article provides a comprehensive review of existing research on these effects, raises critiques, and points out open questions. It introduces micro-economic rebound effect and suggests extending consumer-side analysis to incorporate potential ‘psychological rebound effects.’ It then discusses meso-economic rebound effects, i.e. producer-side and market-level rebounds, which so far have achieved little attention in the literature. Finally, the article critically reviews evidence for macro-economic rebound effects as energy efficiency-induced economic growth impacts. For all three categories, the article summarizes assessments of their potential quantitative scope, while pointing out remaining methodological weaknesses and open questions. As a rough “rule of thumb”, in the long term and on gross average, only half the technical savings potential of across-the-board efficiency improvements may actually be achieved in the real world. Policies that aim at cutting energy service demand to sustainable levels are well advised to take due note of detrimental behavioral and economic growth impacts, and should foster policies and measures that can contain them.

The technical and economic efficiency in the mineral processing for lead-zinc and copper ores by Microsoft excel

OpenAIRE

Krstev, Aleksandar; Krstev, Boris; Krstev, Dejan; Vuckovski, Zoran

2012-01-01

The comparisons between economical and technical efficiency for lead flotation indicators, zinc flotation indicators in Sasa mine, Toranica and Zletovo mine. The comparisons for economic and technical efficiency for copper flotation indicators in Bucim mine. The possibility of equaled between both efficiencies for flotation indicators from mentioned mines using Microsoft Excel 2010.

Analysis of extreme values of the economic efficiency indicators of transport infrastructure projects

Science.gov (United States)

Korytárová, J.; Vaňková, L.

2017-10-01

Paper builds on previous research of the authors into the evaluation of economic efficiency of transport infrastructure projects evaluated by the economic efficiency ratio - NPV, IRR and BCR. Values of indicators and subsequent outputs of the sensitivity analysis show extremely favourable values in some cases. The authors dealt with the analysis of these indicators down to the level of the input variables and examined which inputs have a larger share of these extreme values. NCF for the calculation of above mentioned ratios is created by benefits that arise as the difference between zero and investment options of the project (savings in travel and operating costs, savings in travel time costs, reduction in accident costs and savings in exogenous costs) as well as total agency costs. Savings in travel time costs which contribute to the overall utility of projects by more than 70% appear to be the most important benefits in the long term horizon. This is the reason why this benefit emphasized. The outcome of the article has resulted how the particular basic variables contributed to the total robustness of economic efficiency of these project.

TRENDS IN TAX DEVELOPMENT - EFFICIENCY AND ECONOMIC GROWTH

Directory of Open Access Journals (Sweden)

Tanya Todorova

2017-12-01

Full Text Available The discussion on the role of the state and the amount of public revenue to maintain a balance between economic stability and social justice lasts for decades. The need for active state participation in the economy and the use of public revenue as a fiscal instrument is tangible. Delayed economic growth rates on global, regional and national level are a challenge to budget stability. In this article, the object of research is taxation, the subject - the trends and challenges to its effectiveness. The aim is to clarify whether there is a clear strategy on the marginal and implicit tax rate on the income of the population by comparing Bulgaria and other newly admitted countries in the EU (Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Slovakia, Slovenia and Romania. The main task is to justify the need to build a long-term strategy to increase the efficiency of labor taxation in order to achieve optimal distribution and redistribution of income.

Effects of steam pretreatment and co-production with ethanol on the energy efficiency and process economics of combined biogas, heat and electricity production from industrial hemp

Science.gov (United States)

2013-01-01

Background The study presented here has used the commercial flow sheeting program Aspen Plus™ to evaluate techno-economic aspects of large-scale hemp-based processes for producing transportation fuels. The co-production of biogas, district heat and power from chopped and steam-pretreated hemp, and the co-production of ethanol, biogas, heat and power from steam-pretreated hemp were analysed. The analyses include assessments of heat demand, energy efficiency and process economics in terms of annual cash flows and minimum biogas and ethanol selling prices (MBSP and MESP). Results Producing biogas, heat and power from chopped hemp has the highest overall energy efficiency, 84% of the theoretical maximum (based on lower heating values), providing that the maximum capacity of district heat is delivered. The combined production of ethanol, biogas, heat and power has the highest energy efficiency (49%) if district heat is not produced. Neither the inclusion of steam pretreatment nor co-production with ethanol has a large impact on the MBSP. Ethanol is more expensive to produce than biogas is, but this is compensated for by its higher market price. None of the scenarios examined are economically viable, since the MBSP (EUR 103–128 per MWh) is higher than the market price of biogas (EUR 67 per MWh). The largest contribution to the cost is the cost of feedstock. Decreasing the retention time in the biogas process for low solids streams by partly replacing continuous stirred tank reactors by high-rate bioreactors decreases the MBSP. Also, recycling part of the liquid from the effluent from anaerobic digestion decreases the MBSP. The production and prices of methane and ethanol influence the process economics more than the production and prices of electricity and district heat. Conclusions To reduce the production cost of ethanol and biogas from biomass, the use of feedstocks that are cheaper than hemp, give higher output of ethanol and biogas, or combined production with

Environmental efficiency among corn ethanol plants

International Nuclear Information System (INIS)

Sesmero, Juan P.; Perrin, Richard K.; Fulginiti, Lilyan E.

2012-01-01

Economic viability of the US corn ethanol industry depends on prices, technical and economic efficiency of plants and the extent of policy support. Public policy support is tied to the environmental efficiency of plants measured as their impact on emissions of greenhouse gases. This study evaluates the environmental efficiency of seven recently constructed ethanol plants in the North Central region of the US, using nonparametric data envelopment analysis (DEA). The minimum feasible level of GHG emissions per unit of ethanol is calculated for each plant and this level is decomposed into its technical and allocative sources. Results show that, on average, plants in our sample may be able to reduce GHG emissions by a maximum of 6% or by 2.94 Gg per quarter. Input and output allocations that maximize returns over operating costs (ROOC) are also found based on observed prices. The environmentally efficient allocation, the ROOC-maximizing allocation, and the observed allocation for each plant are combined to calculate economic (shadow) cost of reducing greenhouse gas emissions. These shadow costs gauge the extent to which there is a trade off or a complementarity between environmental and economic targets. Results reveal that, at current activity levels, plants may have room for simultaneous improvement of environmental efficiency and economic profitability. -- Highlights: ► Environmental efficiency of ethanol plants in the North Central US is evaluated. ► Economic (shadow) cost of reducing greenhouse gas emissions is calculated. ► Feasible changes in the mix of inputs and byproducts can reduce GHG emissions. ► On average plants may be able to reduce GHG emissions by 2.94 Gg per quarter. ► GHG reductions may be achieved at a moderate or zero operating cost.

Policies and measures for economic efficiency, energy security and environment protection in India

International Nuclear Information System (INIS)

Venkaiah, M.; Kaushik, S.C.; Dewangan, M.L.

2007-01-01

India needs to sustain 8-10% economic growth to meet energy needs of people below poverty line. India would, at least, need to grow its primary energy supply (3-4 times) of present consumption to deliver a sustained growth of 8% by 2031. This paper discusses India's policies and measures for economic efficiency, environment protection and energy security (3-E). (author)

The economical efficiency of private investments in higher education in Russia

Directory of Open Access Journals (Sweden)

Elena Maksyutina

2011-12-01

Full Text Available The article investigates the economical efficiency of investments in higher education in modern conditions of Russia. The beginning of the article includes a characteristic of the existing empiric research concerning the efficiency of investments in human capital assets. Further the author of the article introduces the results of pay off calculation of private investments in higher education. The result of the research was that in modern conditions of Russia investments in higher education are exceedingly advantageous. High norms of higher education feedback and short period of pay off of these investments explain the reasons of continuously growing demand for it on the part of the population, especially young people. The article proves that the level of population education in Russia is quite high, however accumulated human capital asset is used insufficiently effective. Many people with higher education are forced to take jobs not requiring higher education.  Sharp shift in educational behavior of Russian people raises new demands to labor market. Graduates of higher educational institutions, appearing on a labor market, form qualitatively different demands towards it. But tempo of Russian economics development today can not provide job positions for all graduates of higher educational institutions. That is why structural change of economics is needed.

Classic maximum entropy recovery of the average joint distribution of apparent FRET efficiency and fluorescence photons for single-molecule burst measurements.

Science.gov (United States)

DeVore, Matthew S; Gull, Stephen F; Johnson, Carey K

2012-04-05

We describe a method for analysis of single-molecule Förster resonance energy transfer (FRET) burst measurements using classic maximum entropy. Classic maximum entropy determines the Bayesian inference for the joint probability describing the total fluorescence photons and the apparent FRET efficiency. The method was tested with simulated data and then with DNA labeled with fluorescent dyes. The most probable joint distribution can be marginalized to obtain both the overall distribution of fluorescence photons and the apparent FRET efficiency distribution. This method proves to be ideal for determining the distance distribution of FRET-labeled biomolecules, and it successfully predicts the shape of the recovered distributions.

ECONOMIC THEORY OF LOBBYING: EVALUATION OF ECONOMIC EFFICIENCY

Directory of Open Access Journals (Sweden)

Tolstyh Pavel Aleksandrovich

2013-01-01

Full Text Available In this article the author continues to analyze lobbying with regards to economic paradigm. [The author has started discussing lobbying in terms of economic theory in the article Politico-economic theory of lobbying / / Historical, philosophical, political and legal sciences, culture and art. Theory and practice. Tambov: Gramota, 2013. No 1. Part 2. p. 177-189.] Researcher evaluates the cost effectiveness of the lobbying function. Lobbying is understood as activity of specifically authorized employees of corporations and lobbying firms representing their interests, trade associations. This activity is aimed at improving the profitability of integrated and sustainable business development by representing long-term, comfortable, predictable system of relationships with the relevant field-specific political stakeholders of the federal and regional levels. The article presents an in-depth analysis of economic concepts of lobbying function.

EFFICIENCY OF CREDIT PORTFOLIO MANAGEMENT IN CONDITIONS OF ECONOMIC INSTABILITY

Directory of Open Access Journals (Sweden)

Koshel H.

2018-01-01

Full Text Available Introduction. The active development of integration processes causes the necessity of applying high-level approaches to management of the banking system, which is an essential part of the financial sector. Due to the importance of credit operations in the portfolio of banking assets, development of efficient and flexible credit management system is the basis for financial and market stability of banks. Purpose. Analyze the condition of the credit portfolio of banking institutions under the influence of economic processes and make conclusions and recommendations about the effectiveness of managing the bank’s credit portfolio and generalize ways of improving the structure and quality of the bank’s credit portfolio. Results. Over the last six years, the quality of the credit portfolio has become worse because of the bad debts growing and, as a result, decreasing in revenues. The calculated coefficient of management efficiency of a credit portfolio shows the dependence of this indicator on the value of risk and yield. In order to confirm the dependence and determine the degree of influence of these indicators on the efficiency of management of a loan portfolio, an economic-mathematical model was constructed on the example of both individual banks and the banking system as a whole. Detected dependence of factors is quite logical, therefore, the model can be recommended for practical use. Conclusion. Using this method of determining the management efficiency of a credit portfolio will allow the management of the bank to make reasonable decisions. It will allow the possibility of forming a more justified credit portfolio, taking into account not only the profitability, but also the real level of risk of credit operations.

Maximum mutual information vector quantization of log-likelihood ratios for memory efficient HARQ implementations

DEFF Research Database (Denmark)

Danieli, Matteo; Forchhammer, Søren; Andersen, Jakob Dahl

2010-01-01

analysis leads to using maximum mutual information (MMI) as optimality criterion and in turn Kullback-Leibler (KL) divergence as distortion measure. Simulations run based on an LTE-like system have proven that VQ can be implemented in a computationally simple way at low rates of 2-3 bits per LLR value......Modern mobile telecommunication systems, such as 3GPP LTE, make use of Hybrid Automatic Repeat reQuest (HARQ) for efficient and reliable communication between base stations and mobile terminals. To this purpose, marginal posterior probabilities of the received bits are stored in the form of log...

ECONOMIC THEORY OF LOBBYING: EVALUATION OF ECONOMIC EFFICIENCY

Directory of Open Access Journals (Sweden)

Павел Александрович Толстых

2013-04-01

Full Text Available In this article the author continues to analyze lobbying with regards to economic paradigm. [The author has started discussing lobbying in terms of economic theory in the article Politico-economic theory of lobbying / / Historical, philosophical, political and legal sciences, culture and art. Theory and practice. Tambov: Gramota, 2013. No 1. Part 2. p. 177-189.] Researcher evaluates the cost effectiveness of the lobbying function. Lobbying is understood as activity of specifically authorized employees of corporations and lobbying firms representing their interests, trade associations. This activity is aimed at improving the profitability of integrated and sustainable business development by representing  long-term, comfortable, predictable system of relationships with the relevant field-specific political stakeholders of the federal and regional levels. The article presents an in-depth analysis of economic concepts of lobbying function.DOI: http://dx.doi.org/10.12731/2218-7405-2013-1-3

Standardization and Green Economic Change - the Case of Energy Efficiency in Buildings

DEFF Research Database (Denmark)

Andersen, Maj Munch; Faria, Lourenco

2015-01-01

This paper investigates the role of standardization for green economic change using energy efficiency in buildings as a case. Innovation research on standards tends to focus on the competition between competing emerging standards as well as the economic impacts of these. The idea pursued here...... energy efficiency becomes an issue in standardization work using buildings as a case. The paper seeks more specifically to investigate the rise of building related standards generally over time as well as in different technical areas and geographic regions. The hypothesis pursued in this paper...... is that the rise of the green economy can only take place accompanied by considerable institution formation in the form of standards. In this sense, the presence of standards may be seen as an important indicator on the maturity of the greening of the economy. The paper presents early empirical work...

Improving the ecohydrological and economic efficiency of Small Hydropower Plants with water diversion

Science.gov (United States)

Razurel, Pierre; Gorla, Lorenzo; Tron, Stefania; Niayifar, Amin; Crouzy, Benoît; Perona, Paolo

2018-03-01

Water exploitation for energy production from Small Hydropower Plant (SHP) is increasing despite human pressure on freshwater already being very intense in several countries. Preserving natural rivers thus requires deeper understanding of the global (i.e., ecological and economic) efficiency of flow-diversion practice. In this work, we show that the global efficiency of SHP river intakes can be improved by non-proportional flow-redistribution policies. This innovative dynamic water allocation defines the fraction of water released to the river as a nonlinear function of river runoff. Three swiss SHP case studies are considered to systematically test the global performance of such policies, under both present and future hydroclimatic regimes. The environmental efficiency is plotted versus the economic efficiency showing that efficient solutions align along a (Pareto) frontier, which is entirely formed by non-proportional policies. On the contrary, other commonly used distribution policies generally lie below the Pareto frontier. This confirms the existence of better policies based on non-proportional redistribution, which should be considered in relation to implementation and operational costs. Our results recommend abandoning static (e.g., constant-minimal-flow) policies in favour of non-proportional dynamic ones towards a more sustainable use of the water resource, also considering changing hydroclimatic scenarios.

State policy as a driver of innovation to support economic growth: California energy-efficiency policy (1975-2005)

Science.gov (United States)

Klementich, Eloisa Y.

2011-12-01

Purpose. The purpose of this research was to identify whether a relationship exists between state energy-efficiency policy and innovation in the State of California and to shed light on the impact that energy-efficiency policy can have on supporting statewide economic development goals. Theoretical Framework. The theoretical framework drew from foundations in neoclassical economic theory, technology change theory, and new growth theory. Together these theories formed the basis to describe the impacts caused by the innovations within the market economy. Under this framework, policy-generated innovations are viewed to be translated into efficiency and productivity that propel economic benefits. Methodological Considerations. This study examined various economic indices and efficiency attainment indices affecting four home appliances regulated under Title 20's energy-efficiency standard established by the California Energy Commission, Warren Alquist Act. The multiple regression analysis performed provided an understanding of the relationship between the products regulated, the regulation standard, and the policy as it relates to energy-efficiency regulation. Findings. There is enough evidence to show that strategies embedded in the Warren Alquist Act, Title 20 do drive innovation. Three of the four product categories tested showed statistical significance in the policy standard resulting in an industry efficiency improvement. Conclusively, the consumption of electricity per capita in California has positively diverged over a 35-year period from national trends, even though California had mirrored the nation in income and family size during the same period, the only clear case of divergence is the state's action toward a different energy policy. Conclusions and Recommendations. California's regulations propelled manufacturers to reach higher efficiency levels not otherwise pursued by market forces. The California effort included alliances all working together to make

Production System of Peranakan Etawah Goat under Application of Feed Technology: Productivity and Economic Efficiency

Directory of Open Access Journals (Sweden)

Akhmad Sodiq

2009-09-01

Full Text Available Feed resources are the major constraint in increasing goat production in the village. The main constraints to goat raising are related to feeds (i the high cost of transport of crop residues and grass to the homesteads, (ii the low nutritive value of feeds used, particularly in the dry period. This research was design to evaluate goat productivity and economic efficiency of goat farming under application of feed technology production system in Peranakan Etawah goat farmer group of Gumelar Banyumas Central Java. All farmers were taken as respondents using census methods. On farm research with participative focused group discussion, indepth interview, and farm observation. Descriptive analysis and independent t test methods were used to analyze the data. Results of this study showed that there was a significant improvement goat productivity on production system with the application of feed technology. Body weight at weaning, survival rate till weaning, and doe productivity were increased 7%, 2% and 5%, respectively. There was no evidence of significant different of farmers income and economic efficiency before and after the applied feed technology (P>0.05. The calculation was based on cash flow. Before application, farmers income per year and economic efficiency were Rp14.404.520,00 and 1.21, then insignificantly improve into Rp16.487.100,00 and 1.27, respectively. (Animal Production 11(3: 202-208 (2009 Key Words: Livestock production system, Peranakan Etawah goat, feed technology aplication, productivity and economic efficiency

On the complex analysis of the reliability, safety, and economic efficiency of atomic electric power stations

International Nuclear Information System (INIS)

Emel'yanov, I.Ya.; Klemin, A.I.; Polyakov, E.F.

1977-01-01

The problem is posed of effectively increasing the engineering performance of nuclear electric power stations (APS). The principal components of the engineering performance of modern large APS are considered: economic efficiency, radiation safety, reliability, and their interrelationship. A nomenclature is proposed for the quantitative indices which most completely characterize the enumerated properties and are convenient for the analysis of the engineering performance. The urgent problem of developing a methodology for the complex analysis and optimization of the principal performance components is considered; this methodology is designed to increase the efficiency of the work on high-performance competitive APS. The principle of complex optimization of the reliability, safety, and economic-efficiency indices is formulated; specific recommendations are made for the practical realization of this principle. The structure of the complex quantiative analysis of the enumerated performance components is given. The urgency and promise of the complex approach to solving the problem of APS optimization is demonstrated, i.e., the solution of the problem of creating optimally reliable, fairly safe, and maximally economically efficient stations

Reviewing the economic efficiency of disaster risk management

Science.gov (United States)

Mechler, Reinhard

2013-04-01

There is a lot of rhetoric suggesting that disaster risk management (DRM) pays, yet surprisingly little in the way of hard facts. Cost-benefit analysis (CBA) is one major tool that can provide quantitative information about the prioritization of disaster risk management (DRM) (and climate adaptation) based on economic principles. Yet, on a global scale, there has been surprisingly little robust evidence on the economic efficiency and benefits of risk management measures. This review shows that for the limited evidence reported the economic case for DRM across a range of hazards is strong and that the benefits of investing in DRM outweigh the costs of doing so, on average, by about four times the cost in terms of avoided and reduced losses. Most studies using a CBA approach focus on structural DRM and most information has been made available on physical flood prevention. There have been some limited studies on preparedness and risk financing. The global evidence base is limited and estimates appear not very solid, and overall, in line with the conclusion of the recent IPCC SREX report, there is limited evidence and medium agreement across the literature. Some of the factors behind the limited robustness are inherent to CBA more widely: these challenges comprise the inability to price intangibles, evaluating strategies rather than single projects, difficulties in assessing softer rather than infrastructure-related options, choices regarding a proper discount rate, lack of accounting for the distribution of benefits and costs and difficulties with assessing nonmarket values such as those related to health, the environment, or public goods. Although techniques exist to address some of these challenges, they are not very likely to easily go away. Other challenges associated specifically with DRM, such as the need and difficulty to undertake risk -based analysis can be overcome, and there have been manuals and reports providing a way forward. In an age of austerity, cost

An efficient genetic algorithm for maximum coverage deployment in wireless sensor networks.

Science.gov (United States)

Yoon, Yourim; Kim, Yong-Hyuk

2013-10-01

Sensor networks have a lot of applications such as battlefield surveillance, environmental monitoring, and industrial diagnostics. Coverage is one of the most important performance metrics for sensor networks since it reflects how well a sensor field is monitored. In this paper, we introduce the maximum coverage deployment problem in wireless sensor networks and analyze the properties of the problem and its solution space. Random deployment is the simplest way to deploy sensor nodes but may cause unbalanced deployment and therefore, we need a more intelligent way for sensor deployment. We found that the phenotype space of the problem is a quotient space of the genotype space in a mathematical view. Based on this property, we propose an efficient genetic algorithm using a novel normalization method. A Monte Carlo method is adopted to design an efficient evaluation function, and its computation time is decreased without loss of solution quality using a method that starts from a small number of random samples and gradually increases the number for subsequent generations. The proposed genetic algorithms could be further improved by combining with a well-designed local search. The performance of the proposed genetic algorithm is shown by a comparative experimental study. When compared with random deployment and existing methods, our genetic algorithm was not only about twice faster, but also showed significant performance improvement in quality.

Economic effects of energy efficiency improvements in the Finnish building stock

International Nuclear Information System (INIS)

Tuominen, Pekka; Forsström, Juha; Honkatukia, Juha

2013-01-01

This study estimates the economic effects of investing in energy efficiency in buildings on a national level. First conservation potentials in space heating for two different scenarios with different levels of investment in energy efficiency are quantified. This was done relying on statistical data and future projections of the development of the building stock. Then economic modeling was used to estimate the effects on energy sector and the economy at large. The results show that a rather modest increase resulting in a few percent rise in annual construction and renovation investments can decrease total primary energy consumption 3.8–5.3% by 2020 and 4.7–6.8% by 2050 compared to a baseline scenario. On the short term a slight decrease in the level of GDP and employment is expected. On the medium to long term, however, the effects on both would be positive. Furthermore, a significant drop in harmful emissions and hence external costs is anticipated. Overall, a clear net benefit is expected from improving energy efficiency. - Highlights: ► The possible cut in energy consumption: 3.8–5.3% by 2020 and 4.7–6.8% by 2050. ► Short term negative effects to GDP and long term positive effects are expected. ► A significant drop in harmful emissions and hence external costs is anticipated.

RESEARCHES CONCERNING THE ECONOMIC EFFICIENCY ACHIEVED SUCCESSIVE TO THE APPLICATION OF BIOLOGICALLY-ACTIVE PRODUCTS IN SMOOTH BROME CROP

Directory of Open Access Journals (Sweden)

ELENA PEł

2008-05-01

Full Text Available Within any branch of material production, the supervision of the economic effects caused by the applied technologies is an essential requirement. Not only related to the productive activity, but also related to scientific research, designing and other fields of activity, the final goal is represented by the achievement of immediate or far off economic effects. The introduction and generalization into production of the newest technologies of forage production must rely upon calculations of economic efficiency, too. The objective of these calculations is to offer to any producer the possibility to choose among the optimal technologic variants, with great productions per surface unit, of high quality and low costs. The calculations of economic efficiency were carried out during the three years of experimentation. The economic efficiency obtained after the application of biostimulants in smooth brome during the first year of production is expressed through the achievement of a profit per surface unit of 75.85 – 127.00 €/ha. Successive to the calculations of economic efficiency, during the second year of production, the profit per surface unit recorded values between 79.10 – 153.10 €/ha depending upon the applied biostimulant, and during the third year of production the profit obtained per surface unit was 211.05 – 270.70 €/ha.

Essays in economics of energy efficiency in residential buildings - An empirical analysis[Dissertation 17157

Energy Technology Data Exchange (ETDEWEB)

Jakob, M.

2007-07-01

Energy efficiency in the building sector is a key element of cost-effective climate change and energy policies in most countries throughout the world. (...) However, a gap between the cost-effectiveness of energy efficiency measures, their benefits, the necessities from a societal point of view on the one hand and the actual investments in the building stock - particularly in the moment of re-investment and refurbishing - on the other hand became more and more evident. The research questions that arose against this background were whether this gap and the low energy efficiency levels and rates could be confirmed empirically and if yes, how the gap could be explained and how it could be overcome by adequate policy measures. To address these questions, the multi-functional character of buildings (i.e. well conditioned and quiet living rooms and working space) had to be considered. Associated benefits arise on the societal level (ancillary benefits) and on the private level (co-benefits), the latter being increasingly addressed by different building labels such as 'Minergie', 'Passive House', and others. It was assumed that these co-benefits are of economic relevance, but empirical evidence regarding their economic value was missing. Thus, putting these benefits into an appropriate economic appraisal framework was at stake to make use of them in market information and policy instruments, preventing uninformed and biased cost benefit analyses and decisions on the private and on the societal level. The research presented in this PhD thesis had the goal to provide a sound empirical basis about costs and benefits of energy efficiency investments in residential buildings, with a special emphasis on the economic valuation of their co-benefits from a building user perspective (owner-occupiers, purchasers and tenants). In view of long time-horizons in the building sector, the techno-economic dynamics should also be addressed. The results should be useful

ERWIN2: User's manual for a computer model to calculate the economic efficiency of wind energy systems

International Nuclear Information System (INIS)

Van Wees, F.G.H.

1992-01-01

During the last few years the Business Unit ESC-Energy Studies of the Netherlands Energy Research Foundation (ECN) developed calculation programs to determine the economic efficiency of energy technologies, which programs support several studies for the Dutch Ministry of Economic Affairs. All these programs form the so-called BRET programs. One of these programs is ERWIN (Economische Rentabiliteit WINdenergiesystemen or in English: Economic Efficiency of Wind Energy Systems) of which an updated manual (ERWIN2) is presented in this report. An outline is given of the possibilities and limitations to carry out calculations with the model

EVALUATION OF ECOLOGICAL AND ECONOMIC EFFICIENCY OF STEEL-MAKING SLAG IN ROAD CONSTRUCTION

Directory of Open Access Journals (Sweden)

A. K. Коstenkо

2008-01-01

Full Text Available The paper provides an estimation of ecological and economic efficiency of utilization of the electric steel-melting slag of the Belarussian Steel Works in the road construction. The obtained results  give us a reason to consider that involvement of this type of industrial waste into economic turnover is an economically expedient and ecologically justified measure that will allow road-construction enterprises to reduce the cost of installation and construction works and enlarge their resource potential as well as to help the producer of wastes to release funds for innovation development and solve the problem of waste accumulation in the near future.

Implementation of energy efficiency standards of household refrigerator/freezer in China: Potential environmental and economic impacts

International Nuclear Information System (INIS)

Tao, Jing; Yu, Suiran

2011-01-01

Due to the rapid economic development, living standards in China are improving fast. Chinese families are having more household electrical appliances, among which refrigerators are indispensable. Energy consumption of refrigerators is huge in China and causes environmental concerns. China has issued the national energy efficiency standards of household refrigerators, GB12021.2-2003 and GB12021.2-2008 to promote high-efficiency refrigerator production and use. This study evaluated the impacts of the standards on the environment, manufacturers and consumers over a long-term period of 2003-2023. It first evaluated the potential electricity conservation and GHG emission reduction resulting from energy efficiency improvements driven by the standards. Next, manufacturers' technological and economic concerns about complying with the standards were discussed. Some efficiency improving design options were considered and the resulting increases in manufacturing cost and retail price were estimated. The return of consumers from invest in efficiency was analyzed based on lifecycle cost saving of the improved models. The economical viability of the standards was then evaluated by national consumer costs and benefits. Results showed that the considered efficiency standards will potentially save a cumulative total of 588-1180 TWh electricity, and reduce emission of 629-1260 million tons of CO 2 , 4.00-8.04 million tons of SO x and 2.37-4.76 million tons of NO x by 2023, depending on sale share of models by efficiency. In a more environmentally optimal case (75% sale share of high-efficiency models), the national consumer benefits are 121 billion RMB (discounted), with the benefit/cost ratio of consumer's expenditure being 1.45:1. However, the preference to high-efficiency models is substantial influenced by consumer's expectation on return from the additional cost on efficiency.

How to measure the economic impacts of changes in growth, feed efficiency and survival in aquaculture

NARCIS (Netherlands)

Kankainen, M.; Setala, J.; Berrill, I.K.; Ruohonen, K.; Noble, C.; Schneider, O.

2012-01-01

In this article we introduce a variety of bio-economic models that can be used to calculate the economic benefits associated with improved productivity in aquaculture. In the aquaculture industry, three important biological productivity factors are growth, survival and feed efficiency. The

Emission Trading and the Kyoto protocol: Are they efficient economic instruments?

International Nuclear Information System (INIS)

Ibanez Londono, Ana Maria

1998-02-01

The Kyoto Protocol establishes a tradeable permits market for green house gases -GHG- emissions to reduce the costs of meeting the Protocol obligations. Economic theory provides the arguments to support the creation of GHG tradeable permits. Several economic researches have shown that vis-a-vis command and control regulations, tradeable permits induce economic agents to achieve environmental goals at a minimum cost. However, the conditions to minimize costs through tradeable permits are stringent. Tradeable permits require well functioning markets, e.g. perfect competition and perfect information. The tradeable permits market created by the Kyoto Protocol hardly meet these necessary conditions. Some countries like Japan, Great Britain and the United Stated are large emitters and thus may exert market power. Price manipulation may have implications over the static and dynamic efficiency of the permits. This paper takes a first look to the consequences of imperfect markets on the tradeable permit system of the Kyoto Protocol

Efficient STEP (solar thermal electrochemical photo) production of hydrogen - an economic assessment

Energy Technology Data Exchange (ETDEWEB)

Licht, Stuart [Department of Chemistry, George Washington University, Ashburn, VA 20147 (United States); Solar Institute, George Washington University, Washington, DC 20052 (United States); Chitayat, Olivia; Bergmann, Harry; Dick, Andrew; Ayub, Hina [Solar Institute, George Washington University, Washington, DC 20052 (United States); Ghosh, Susanta [Department of Chemistry, George Washington University, Ashburn, VA 20147 (United States); Department of Chemistry, Visva-Bharati, Santiniketan (India)

2010-10-15

A consideration of the economic viability of hydrogen fuel production is important in the STEP (Solar Thermal Electrochemical Photo) production of hydrogen fuel. STEP is an innovative way to decrease costs and increase the efficiency of hydrogen fuel production, which is a synergistic process that can use concentrating photovoltaics (CPV) and solar thermal energy to drive a high temperature, low voltage, electrolysis (water-splitting), resulting in H{sub 2} at decreased energy and higher solar efficiency. This study provides evidence that the STEP system is an economically viable solution for the production of hydrogen. STEP occurs at both higher electrolysis and solar conversion efficiencies than conventional room temperature photovoltaic (PV) generation of hydrogen. This paper probes the economic viability of this process, by comparing four different systems: (1) 10% or (2) 14% flat plate PV driven aqueous alkaline electrolysis H{sub 2} production, (3) 25% CPV driven molten electrolysis H{sub 2} production, and (4) 35% CPV driven solid oxide electrolysis H{sub 2} production. The molten and solid oxide electrolysers are high temperature systems that can make use of light, normally discarded, for heating. This significantly increases system efficiency. Using levelized cost analysis, this study shows significant cost reduction using the STEP system. The total price per kg of hydrogen is shown to decrease from 5.74 to 4.96 to 3.01 to 2.61 with the four alternative systems. The advanced STEP plant requires less than one seventh of the land area of the 10% flat cell plant. To generate the 216 million kg H{sub 2}/year required by 1 million fuel cell vehicles, the 35% CPV driven solid oxide electrolysis requires a plant only 9.6 mi{sup 2} in area. While PV and electrolysis components dominate the cost of conventional PV generated hydrogen, they do not dominate the cost of the STEP-generated hydrogen. The lower cost of STEP hydrogen is driven by residual distribution and

Economic feasibility of a novel energy efficient middle vessel batch distillation to reduce energy use

International Nuclear Information System (INIS)

Babu, G. Uday Bhaskar; Aditya, R.; Jana, Amiya K.

2012-01-01

It has long been recognized that the highly irreversible operation of batch distillation involves more wastage of energy compared to continuous flow distillation. For boosting its energy efficiency, the middle vessel batch distillation (MVBD) column has been invented. In this paper, a rigorous model for an MVBD process for the separation of a ternary hydrocarbon system is developed to simulate its transient behavior. In order to obtain the products at their maximum achievable purities, we device the two operating policies for the representative configuration. This contribution introduces a heat pumping system in the MVBD aiming to further improve its energetic and economic potentials. This novel heat integration technique is operated with a variable speed compressor for pressurizing the overhead vapor before thermally coupling it with the reboiler liquid. Interestingly, along with the compression ratio (CR), the other two manipulated variables are the inflow rate of overhead vapor to the compressor and that of an external medium (here, steam) that provides makeup heat to the reboiler. The operation of this adaptive heat pump assisted column originally involves the simultaneous adaptation of two variables throughout the entire batch processing. The simulation results show that a cost savings predicted in the heat integrated MVBD scheme can be achieved along with a substantial reduction in energy consumption. -- Highlights: ► The two operating policies have been derived for middle vessel batch distillation operation. ► This contribution introduces an adaptive heat pumping system for the middle vessel column. ► The heat integrated column shows better energetic and economic potentials over its conventional counterpart.

Evaluating the Economic Performance of High-Technology Industry and Energy Efficiency: A Case Study of Science Parks in Taiwan

Directory of Open Access Journals (Sweden)

Min-Ren Yan

2013-02-01

Full Text Available High-technology industries provide opportunities for economic growth, but also raise concerns because of their energy-demanding nature. This paper provides an integrated evaluation of both economic benefits and energy efficiency of high-technology industries based on the real data from one of the globally recognized high-technology industrial clusters, the national science parks in Taiwan. A nation-wide industrial Input-Output Analysis is conducted to demonstrate the positive effects of science parks on national economic developments and industrial upgrades. The concept of energy intensity and an energy-efficient economy index are applied to an integrated assessment of the relationship between economic growth and energy consumption. The proposed case study suggests that economic and energy efficiency objectives can be simultaneously achieved by the development of high-technology industries, while three energy policy implications are considered. First, a nation-wide macro viewpoint is needed and high-technology industries should be considered as parts of the national/regional economies by governmental agencies. Second, a proper industrial clustering mechanism and the shared environmental facilities supported by the government, such as planned land and road usage, electricity and water supply, telecommunications system, sewerage system and wastewater treatments, can improve energy efficiency of high-technology industries. Third, the governmental policies on the taxing and management system in science parks would also direct energy-efficient economy of high-technology industries.

Economic efficiency of environmental management system operation in industrial companies

Science.gov (United States)

Dukmasova, N.; Ershova, I.; Plastinina, I.; Boyarinov, A.

2017-06-01

The article examines the issue of the efficiency of the environmental management system (EMS) implementation in the Russian machine-building companies. The analysis showed that Russia clearly lags behind other developed and developing countries in terms of the number of ISO 14001 certified companies. According to the authors, the main cause of weak system implementation activity is attributed to the lack of interest in ISO 14001 certification on the Russian market. Five-year primary (field) research aimed at the analysis of the environmental priorities of the civilians suggests that the image component of the economic benefits ensures the increase in economic and financial performance of the company due to the increase in customers’ loyalty to the products of the EMS adopter. To quantify economic benefits obtained from EMS implementation, a methodological approach with regard to the image component and the decrease in semi-fixed costs due to the increase in the production scale has been developed. This approach has been tested in a machine-building electrical equipment manufacturer in Ekaterinburg. This approach applied to data processing yields the conclusion that EMS gives a good additional competitive advantage to its adopters.

Environmental policy and economic efficiency: tradable permits versus regulatory instrument to control air pollution: a comparative approach USA/France

International Nuclear Information System (INIS)

Cros, Ch.

1998-12-01

The key issue of the thesis paradox of the weak implementation of economic instruments whereas 1) they are theoretically and also empirically considered as efficient; 2) the market imposes itself as the central reference to modem economies; and 3) economic efficiency is nowadays a legitimacy measure of public policies. Two different answers can be given: either theoretical analysis does not enable to explain the real economic efficiency of a political instrument, or environmental policies do not have economic efficiency as their main objective. The analysis take place in a context of a limited rationality and an inter-temporal consistency of public policies. The purpose is to understand the role of economic efficiency criteria during the adoption, building, and evolution of an environmental policy with an analytical point of view, and not a normative one. The institutional analysis of the American and the French pollution control policies, representative of the implementation of a trading permit system for the first, and of a regulatory instrument for the second, prove that the theoretical analysis of an instrument can not explain a real coordination, but only one organizational form among others. An institutional trajectory is the interpretation of policy instruments of policy instruments from 5 fundamental elements: the nature of the legitimacy of the policy; the nature of the regulator hypothesis on the information; the nature of the decision-making basis; the nature of the collective action. A coordination changes when the occurrence of an event moves one of the fundamental elements, and disorganizes the satisfying equilibrium of the agents. Then, the economic efficiency becomes a negotiation point. A political instrument is adopted for its own ability to solve a dysfunction without disrupting the coordination. (author)

Is the Economic andTesting the Efficient Markets Hypothesis on the Romanian Capital Market

Directory of Open Access Journals (Sweden)

Dragoș Mînjină

2013-11-01

Full Text Available Informational efficiency of capital markets has been the subject of numerous empirical studies. Intensive research of the field is justified by the important implications of the knowledge of the of informational efficiency level in the financial practice. Empirical studies that have tested the efficient markets hypothesis on the Romanian capital market revealed mostly that this market is not characterised by the weak form of the efficient markets hypothesis. However, recent empirical studies have obtained results for the weak form of the efficient markets hypothesis. The present decline period of the Romanian capital market, recorded on the background of adverse economic developments internally and externally, will be an important test for the continuation of recent positive developments, manifested the level of informational efficiency too.

ECONOMIC AND SOCIAL OPERATIONAL EFFICIENCY OF MARKET DISTRIBUTION OF INCOME: APPROACHES TO EVALUATION

Directory of Open Access Journals (Sweden)

Z. Halushka

2015-03-01

Full Text Available This article provides a comparison between scientific approaches to understanding the economic and social efficiency of market income distribution. Based on multidisciplinary approaches the essence of the concepts of fairness and efficiency in the distribution; explored approaches to combining efficiency and equity used in policy income distribution at different levels of management; the possible social and economic consequences of ineffective regulation of income in today’s economy. The analysis is based on comparing the four concepts of justice that are considered socially efficient. Considered: utilitarian, formulated by J. Bentham; egalitarian, which provides for equal distribution; market (liberal approach – to polar egalitarian and roulzianskyy that treats justice as fairness, approaches. Based on the generalization of existing approaches analyzed method of estimating social justice in the distribution and the possibility of its application. The structure of the article includes the following sections: 1.Views on terms of efficiency and equity in the distribution of resources and income; 2. Classical and modern approaches to combining efficiency and equity in the distribution; 3. Conflicts combination of the principles of fairness and efficiency in the distribution of incomes policy. The authors also noted that the uneven distribution of income acts as an objective reality, and the question is to prevent dangerous indicators of this unevenness. Market income distribution does not guarantee every person an acceptable level of income. The causes of irregularity are: differences in abilities, mental as well as physical; differences in possession of the property, in the educational level and group reasons associated with luck, chance, surprise win more. This is a definite social injustice market. State, taking a significant share of responsibility for maintaining a basic human right to a dignified life, organizes redistribution.

Chewing efficiency and maximum bite force with different attachment systems of implant overdentures: a crossover study.

Science.gov (United States)

Elsyad, Moustafa Abdou; Khairallah, Ahmed Samir

2017-06-01

This crossover study aimed to evaluate and compare chewing efficiency and maximum bite force (MBF) with resilient telescopic and bar attachment systems of implant overdentures in patients with atrophied mandibles. Ten participants with severely resorbed mandibles and persistent denture problems received new maxillary and mandibular conventional dentures (control, CD). After 3 months of adaptation, two implants were inserted in canine region of the mandible. In a quasi-random method, overdentures were connected to the implants with either bar overdentures (BOD) or resilient telescopic overdentures (TOD) attachment systems. Chewing efficiency in terms of unmixed fraction (UF) was measured using chewing gum (after 5, 10, 20, 30 and 50 strokes), and MBF was measured using a bite force transducer. Measurements were performed 3 months after using each of the following prostheses: CD, BOD and TOD. Chewing efficiency and MBF increased significantly with BOD and TOD compared to CD. As the number of chewing cycles increased, the UF decreased. TOD recorded significant higher chewing efficiency and MBF than BOD. Resilient telescopic attachments are associated with increased chewing efficiency and MBF compared bar attachments when used to retain overdentures to the implants in patients with atrophied mandibles. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Influence of cable losses on the economic analysis of efficient and sustainable electrical equipment

International Nuclear Information System (INIS)

Lobão, J.A.; Devezas, T.; Catalão, J.P.S.

2014-01-01

Increasing energy needs are accompanied by environmental responsibilities, since nowadays electricity companies operate in a competitive and sustainable energy framework. In this context, any proposal for action on energy efficiency becomes important for consumers to minimize operational costs. In electrical installations, electricity consumption can be decreased by reducing losses in the cables, associated with the overall efficiency of the equipment, allowing a better use of the installed power. The losses must be analysed in conjunction with all loads that contribute to the currents in the sections of an electrical installation. When replacing equipment in output distribution boxes with more efficient ones, the current in those sections is reduced in association with the decrease in power losses. This decrease, often forgotten, is taken into account in this work for the economic analysis of efficiency and sustainable electrical equipment. This paper presents a new software application that compares and chooses the best investment in the acquisition of electrical equipment. Simulation results obtained with the new software application are provided and are then validated with experimental results from a real electrical installation. - Highlights: • Any proposal for action on energy efficiency is important for consumers. • Electricity consumption can be decreased by reducing losses in the cables. • A new software application that compares and chooses the best investment is provided. • The economic analysis of efficiency and sustainable electrical equipment is carried out. • Simulation results are validated with experimental results from a real electrical installation

Neutron spectra unfolding with maximum entropy and maximum likelihood

International Nuclear Information System (INIS)

Itoh, Shikoh; Tsunoda, Toshiharu

1989-01-01

A new unfolding theory has been established on the basis of the maximum entropy principle and the maximum likelihood method. This theory correctly embodies the Poisson statistics of neutron detection, and always brings a positive solution over the whole energy range. Moreover, the theory unifies both problems of overdetermined and of underdetermined. For the latter, the ambiguity in assigning a prior probability, i.e. the initial guess in the Bayesian sense, has become extinct by virtue of the principle. An approximate expression of the covariance matrix for the resultant spectra is also presented. An efficient algorithm to solve the nonlinear system, which appears in the present study, has been established. Results of computer simulation showed the effectiveness of the present theory. (author)

Regional and global exergy and energy efficiencies

Energy Technology Data Exchange (ETDEWEB)

Nakicenovic, N; Kurz, R [International Inst. for Applied Systems Analysis, Laxenburg (Austria). Environmentally Compatible Energy Strategies (Ecuador) Project; Gilli, P V [Graz Univ. of Technology (Austria)

1996-03-01

We present estimates of global energy efficiency by applying second-law (exergy) analysis to regional and global energy balances. We use a uniform analysis of national and regional energy balances and aggregate these balances first for three main economic regions and subsequently into world totals. The procedure involves assessment of energy and exergy efficiencies at each step of energy conversion, from primary exergy to final and useful exergy. Ideally, the analysis should be extended to include actual delivered energy services; unfortunately, data are scarce and only rough estimates can be given for this last stage of energy conversion. The overall result is that the current global primary to useful exergy efficiency is about one-tenth of the theoretical maximum and the service efficiency is even lower. (Author)

Economic rationalism and the cost efficiency of hospital chaplaincy: an Australian study.

Science.gov (United States)

Newell, C; Carey, L B

2000-01-01

Health care reform is also occurring in Australia and effects hospital chaplaincy programs. "Economic rationalism" is the philosophic foundation of this effort and its contrast with the values inherit in hospital chaplaincy are highlighted. Selected research results from the Australian system are described and the authors offer a perspective on the cost efficiency of hospital chaplaincy.

Factors that are influencing the economical efficiency of the CHP plants

International Nuclear Information System (INIS)

Ruieneanu, Liviu; Ion, Mircea

2004-01-01

This paper presents some factors that might influence the economical efficiency of a cogeneration plant. These factors are: the understanding of the fuel economy at consumers; - the influence of the electricity production efficiency; - the influence of exergy losses. The statistical data for different countries of Europe show that under the conditions of a deregulated liberalized market of energy the cogeneration plants have numerous financial difficulties. Even if the use of cogeneration ensures a fuel saving, if this economy it is not obvious for the consumers, those consumers might prefer for the production of heat the use of a heat only generating plant. This trend might spread rapidly if the increase of the electricity will not be present immediately in the bill of the consumers that renounce to the heat produced by the CHP plant. The method used for cost allocation on both types of energy has also a great importance, because it might facilitate the rehabilitation measures and doing so it might allow lower prices for both types of energy. Perhaps the most important factor for the economical efficiency of the plant are the exergy losses. The analysis presented above shows two things, namely: - that the electricity production has a very high price, and this cost might be lowered down by some rehabilitation measures (for example repowering); - and that the heat only plants (boilers) are not affected by the exergy losses and that's why if we analyse only the heat production, the use of cogeneration might seem inappropriate

Simulation of maximum light use efficiency for some typical vegetation types in China

Institute of Scientific and Technical Information of China (English)

无

2006-01-01

Maximum light use efficiency (εmax) is a key parameter for the estimation of net primary productivity (NPP) derived from remote sensing data. There are still many divergences about its value for each vegetation type. The εmax for some typical vegetation types in China is simulated using a modified least squares function based on NOAA/AVHRR remote sensing data and field-observed NPP data. The vegetation classification accuracy is introduced to the process. The sensitivity analysis of εmax to vegetation classification accuracy is also conducted. The results show that the simulated values of εmax are greater than the value used in CASA model, and less than the values simulated with BIOME-BGC model. This is consistent with some other studies. The relative error of εmax resulting from classification accuracy is -5.5%―8.0%. This indicates that the simulated values of εmax are reliable and stable.

Comprehensive performance analyses and optimization of the irreversible thermodynamic cycle engines (TCE) under maximum power (MP) and maximum power density (MPD) conditions

International Nuclear Information System (INIS)

Gonca, Guven; Sahin, Bahri; Ust, Yasin; Parlak, Adnan

2015-01-01

This paper presents comprehensive performance analyses and comparisons for air-standard irreversible thermodynamic cycle engines (TCE) based on the power output, power density, thermal efficiency, maximum dimensionless power output (MP), maximum dimensionless power density (MPD) and maximum thermal efficiency (MEF) criteria. Internal irreversibility of the cycles occurred during the irreversible-adiabatic processes is considered by using isentropic efficiencies of compression and expansion processes. The performances of the cycles are obtained by using engine design parameters such as isentropic temperature ratio of the compression process, pressure ratio, stroke ratio, cut-off ratio, Miller cycle ratio, exhaust temperature ratio, cycle temperature ratio and cycle pressure ratio. The effects of engine design parameters on the maximum and optimal performances are investigated. - Highlights: • Performance analyses are conducted for irreversible thermodynamic cycle engines. • Comprehensive computations are performed. • Maximum and optimum performances of the engines are shown. • The effects of design parameters on performance and power density are examined. • The results obtained may be guidelines to the engine designers

The Measurement of Technical Efficiency and Effective Factors in Cucumber Greenhouse (Case Study: Eastern Azarbayjan Province

Directory of Open Access Journals (Sweden)

B. Abdollahi

2010-10-01

Full Text Available The purpose of this study was to estimate technical efficiency of cucumber greenhouses in Eastern Azarbayjan. In economic literature, it means the ratio of maximum output to the inputs. The objective of this research was to determinate the effective factors influencing it's inefficiency. The method of determination of deterministic and stochastic technical efficiency is corrected ordinary least squares (COLS and maximum likelihood (ML respectively. The average of technical efficiency in province’s cucumber greenhouse is approximately about 57 and 93 percent for deterministic and stochastic frontier method respectively. Production types had positive influence on technical inefficiency whereas experience of manager have negative influence on technical inefficiency.

Political and Economic Decisions and Competition – What is the Efficient Antimonopoly Policy?

Directory of Open Access Journals (Sweden)

Irakli Lekvinadze

2014-03-01

Full Text Available This article discusses the influence of economic decisions which affect the antitrust and competition support policies. Many countries provide governmental initiatives for improving antirust legislation. There is an effort to develop efficient legislation, to define market boundaries, to identify dominating companies, and to prevent cartel development. A review of the literature has shown that refined legislation does not work. Qualified and non-politicized economic decisions are required to provide fair and equitable competition in the marketplace. The discussions of various researchers are profiled on the economic issues. This article analyzes The Republic of Georgia’s 20 year unique market experiences in Eastern Europe. Recommendations have been proposed to increase the effectiveness of an anti-monopoly policy. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4

Relationship among performance, carcass, and feed efficiency characteristics, and their ability to predict economic value in the feedlot.

Science.gov (United States)

Retallick, K M; Faulkner, D B; Rodriguez-Zas, S L; Nkrumah, J D; Shike, D W

2013-12-01

A 4-yr study was conducted using 736 steers of known Angus, Simmental, or Simmental × Angus genetics to determine performance, carcass, and feed efficiency factors that explained variation in economic performance. Steers were pen fed and individual DMI was recorded using a GrowSafe automated feeding system (GrowSafe Systems Ltd., Airdrie, Alberta, Canada). Steers consumed a similar diet and received similar management each year. The objectives of this study were to: 1) determine current economic value of feed efficiency and 2) identify performance, carcass, and feed efficiency characteristics that predict: carcass value, profit, cost of gain, and feed costs. Economic data used were from 2011 values. Feed efficiency values investigated were: feed conversion ratio (FCR; feed to gain), residual feed intake (RFI), residual BW gain (RG), and residual intake and BW gain (RIG). Dependent variables were carcass value ($/steer), profit ($/steer), feed costs ($/steer • d(-1)), and cost of gain ($/kg). Independent variables were year, DMI, ADG, HCW, LM area, marbling, yield grade, dam breed, and sire breed. A 10% improvement in RG (P Profit increased with a 10% improvement in feed efficiency (P profit. Eighty-five percent of the variation in cost of gain was explained by ADG, DMI, HCW, and year. Prediction equations were developed that excluded ADG and DMI, and included feed efficiency values. Using these equations, cost of gain was explained primarily by FCR (R(2) = 0.71). Seventy-three percent of profitability was explained, with 55% being accounted for by RG and marbling. These prediction equations represent the relative importance of factors contributing to economic success in feedlot cattle based on current prices.

Energy production, distribution, and pollution controls: Combining engineering and economic analysis to enhance efficiency and policy design

Science.gov (United States)

Perkis, David F.

Three published articles are presented which focus on enhancing various aspects of the energy supply chain. While each paper adopts a different methodology, all three combine engineering data and/or techniques with economic analysis to improve efficiency or policy design within energy markets. The first paper combines a chemical engineering plant design model with an economic assessment of product enhancements within an ethanol production facility. While a new chemical process is shown to achieve greater ethanol yields, the animal feed by-products are denatured and decrease in value due to the degradation of a key nutritional amino acid. Overall, yield increases outweigh any costs, providing additional value to firms adopting this process. The second paper uses a mixed integer linear model to assess the optimal location of cellulosic ethanol production facilities within the state of Indiana. Desired locations with low costs are linked to regions with high yield corn growth, as these areas provide an abundance of corn stover, a by-product of corn and a cellulosic source of ethanol. The third paper implements experimental economic methods to assess the effectiveness of policies intended to control prices in emissions permit markets. When utilizing reserve permit auctions as an alternative to setting explicit maximum prices, prices are elevated beyond the theoretical predictions of the model within the conditions of the experiment. The most likely cause of higher prices is the negotiating power provided to sellers by grandfathering permits as evidenced by higher than expected welfare gains to sellers. Before presenting the articles, a discussion is introduced regarding the role of assumptions used by economists. For each article, a key assumption is highlighted and the consequences of making a different assumption are provided. Whether the consequences are large or small, the benefits of elucidating our models with assumptions based on real world behaviors are clearly

The effect of economic factors and energy efficiency programs on residential electricity consumption

Science.gov (United States)

Sakai, Mihoko

Many countries have implemented policies to correct market and behavioral failures that lead to inefficient energy use. It is important to know what factors and policies can effectively overcome such failures and improve energy efficiency; however, a comprehensive analysis has been difficult because of data limitations. Using state scores compiled by American organizations recently, and adopting fixed-effects regression models, I analyze the joint impacts of relevant factors and policy programs on residential electricity consumption in each U.S. state. The empirical results reveal that increases in electricity price have small and negative effects, and increases in personal income have positive effects on residential electricity sales per capita (a measure of energy efficiency). The results suggest that it may take time for economic factors to affect electricity sales. The effects of personal income suggest the difficulty of controlling residential electricity consumption; however, they also imply that there is some room in households to reduce electricity use. The study also finds that programs and budgets of several policies seem to be associated with electricity sales. The estimates from a model including interaction terms suggest the importance of including multiple policies when analyzing and designing policies to address electricity efficiency. The results also imply the possibility of rebound effects of some policies, whereby improvements in energy efficiency lead to increases in energy consumption due to the associated lower per unit cost. Future studies should analyze both short-term and long-term effects of economic factors and policies, based on improved and accumulated time series and panel data, in order to design more effective policies for improving residential electricity efficiency.

Economic Efficiency of Innovative Materials for Sectors of Economy

Directory of Open Access Journals (Sweden)

Miroshnikova Tatyana

2016-01-01

Full Text Available The paper proposes an approach to the assessment of the economic efficiency of innovative anti-corrosion coatings for sectors of the national economy of the Russia on the basis of a synthesis of strategic sectoral and cost analysis. According to the authors, a comparative analysis of composite polymeric anticorrosion protecting coatings with similar products, estimating of direct and indirect economic effect and prognosis of implementation, forms a deeper understanding of the role of innovative technologies in the Russian state development of import substitution, the investment attractiveness of Russian industries in the new part technologies, applied research activities of private companies. Metal consumption sectors of the economy were chosen as an object of research, as they are characterized by the use of the following products: industrial construction and reconstruction, nuclear and thermal power, chemical, oil and gas, utilities, food processing, automotive, shipbuilding, aviation and rocket science, other industry. Basic modeling of implementation of anticorrosion protecting coatings in industrial enterprises was carried out on the basis of generating energy enterprises as one of the main end-users of anti-corrosive materials that also issue accurate statements.

Health economics, equity, and efficiency: are we almost there?

Directory of Open Access Journals (Sweden)

Ferraz MB

2015-02-01

Full Text Available Marcos Bosi Ferraz1,21Department of Medicine, Escola Paulista de Medicina, Federal University of São Paulo, São Paulo, Brazil; 2São Paulo Center for Health Economics (GRIDES, Escola Paulista de Medicina, Federal University of São Paulo, São Paulo, Brazil Abstract: Health care is a highly complex, dynamic, and creative sector of the economy. While health economics has to continue its efforts to improve its methods and tools to better inform decisions, the application needs to be aligned with the insights and models of other social sciences disciplines. Decisions may be guided by four concept models based on ethical and distributive justice: libertarian, communitarian, egalitarian, and utilitarian. The societal agreement on one model or a defined mix of models is critical to avoid inequity and unfair decisions in a public and/or private insurance-based health care system. The excess use of methods and tools without fully defining the basic goals and philosophical principles of the health care system and without evaluating the fitness of these measures to reaching these goals may not contribute to an efficient improvement of population health. Keywords: health care, health care system, population health

After-installation service, a contribution to enhanced economic efficiency of reactors

International Nuclear Information System (INIS)

Bilger, H.

1996-01-01

After-installation service agreements are concluded in general for the following plant systems or tasks: power operation, inspection and repair during outages, plant enhancements (retrofitting), instrumentation and control (software). The paper gives various examples selected from power plant practice in Germany, showing that service contracts are a major factor contributing to maintaining economic efficiency, or enhancing it. Examples of nuclear power plant management abroad relying on service contracts are also given (USA, France, Japan). (orig./HP) [de

Development of an efficient and economic small scale management scheme for low-and intermediate level radioactive waste and its impact on the environment

International Nuclear Information System (INIS)

Salomon, A.Ph.; Panem, J.A.; Manalastas, H.C.; Cortez, S.L.; Paredes, C.H.; Bartolome, Z.M.

1976-05-01

This paper is a preliminary report on the evolution of a pilot-scale management system for low-and intermediate level radioactive wastes to provide adequate protection to the public as well as maintain the equilibrium in the human environment. Discussions on the waste management and disposal scheme proposals, assessment of waste treatment requirements of the Atomic Research Center, Philippine Atomic Energy Commission, previous experiences in the handling and management of radioactive wastes, current practices and alternatives to meet waste management problems and research studies on waste treatment are presented. In the selection of a chemical treatment process for ARC, comparative studies on the different waste processing methods or combination of processes that will be most suitable for the waste requirements of the Center are now in progress. The decontamination efficiency and economy of the lime-soda, ferrocyanide phosphate and ferric hydroxide methods are being compared. Jar experiments were conducted in the Lime-Soda Process to establish the optima conditions for certain parameter required in order to achieve an efficient and economical treatment system applicable to the local conditions for attaining maximum removal of contamination; maximum settling time - 5 hours after treatment, optimum pH-11, 2:3 ppm ratio of Ca +2 to Co 3 -2 concentration, concentration of dosing reagents can further be increased beyond 160 ppm Ca +2 and 240 ppm Co 3 -2 . Cobalt contamination can be removed with lime-soda treatment aside from strontium

Study on degrading graphene oxide in wastewater under different conditions for developing an efficient and economical degradation method.

Science.gov (United States)

Li, Ting; Zhang, Chao-Zhi; Gu, Chengyue

2017-12-01

With popular application of graphene and graphene oxide (GO), they have been discharged into water. Graphene and GO harm organisms. However, an efficient and economical method for removing graphene and GO in wastewater has seldom been reported. Graphene can be oxidized by hydrogen peroxide to give GO; therefore, degradation of graphene oxide is an important step in the procedure of removal of graphene from water. In this paper, GO degradation via photo-Fenton reaction under different conditions was carried out. Experimental results suggested that GO in wastewater can be efficiently and economically degraded into carbon dioxide and H 2 O when pH value is 3, concentration of H 2 O 2 and FeCl 3 are 35 mM and 5 ppm, respectively. Degradation mechanism of GO was suggested based on UV-vis absorption spectra, scanning electron microscopy, X-ray diffraction and liquid chromatography-mass spectra data of degradation intermediates. This paper suggests an efficient and economical degradation way of GO in wastewater.

Thermodynamic and economic analysis and optimization of power cycles for a medium temperature geothermal resource

International Nuclear Information System (INIS)

Coskun, Ahmet; Bolatturk, Ali; Kanoglu, Mehmet

2014-01-01

Highlights: • We conduct the thermodynamic and economic analysis of various geothermal power cycles. • The optimization process was performed to minimize the exergy losses. • Kalina cycle is a new technology compared to flash and binary cycles. • It is shown that Kalina cycle presents a viable choice for both thermodynamically and economically. - Abstract: Geothermal power generation technologies are well established and there are numerous power plants operating worldwide. Turkey is rich in geothermal resources while most resources are not exploited for power production. In this study, we consider geothermal resources in Kutahya–Simav region having geothermal water at a temperature suitable for power generation. The study is aimed to yield the method of the most effective use of the geothermal resource and a rational thermodynamic and economic comparison of various cycles for a given resource. The cycles considered include double-flash, binary, combined flash/binary, and Kalina cycle. The selected cycles are optimized for the turbine inlet pressure that would generate maximum power output and energy and exergy efficiencies. The distribution of exergy in plant components and processes are shown using tables. Maximum first law efficiencies vary between 6.9% and 10.6% while the second law efficiencies vary between 38.5% and 59.3% depending on the cycle considered. The maximum power output, the first law, and the second law efficiencies are obtained for Kalina cycle followed by combined cycle and binary cycle. An economic analysis of four cycles considered indicates that the cost of producing a unit amount of electricity is 0.0116 $/kW h for double flash and Kalina cycles, 0.0165 $/kW h for combined cycle and 0.0202 $/kW h for binary cycle. Consequently, the payback period is 5.8 years for double flash and Kalina cycles while it is 8.3 years for combined cycle and 9 years for binary cycle

EFFICIENCY OF EDUCATIONAL INNOVATIVE TECHNIQUES IN TEACHING FINANCIAL AND ECONOMIC DISCIPLINES (BASED ON SOCIAL RESEARCH

Directory of Open Access Journals (Sweden)

Irina Konstantinovna Bitkina

2013-11-01

Full Text Available Importance of the presented study consists in need of the introduction innovation educational technology when teaching in high educational institutions. Objectivity specified need you-is the Russian system of the higher education called by turning on standards within the framework of Bolognaagreement. Existing in persisting time scientific studies and practical developments in incomplete measure touch in-ask, concerning using educational innovation technology in the field of teaching social-humanitarian sciences, including coursesfinancial-economic profile. Considering aforesaid, purpose persisting studies is a development of the methodical approach to estimation of efficiency of the using educational innovation and proving of the directions on improvement of their use in high school thrifty persons of the profile when learning student discipline to specialization. In the course of undertaking the study were used methods of the collection and processing statistical and sociological information, summeries and groups got data, quantitative estimation to efficiency applicable technology. The Results of the study touch the methodical questions of the estimation to efficiency educational innovation in high school financial-economic profile and practical aspects of their use when teaching of discipline to specialization beside student.Purpose: development methodical approach educational innovation estimation and proving ways of improving using educational innovation in the economical universities.Methodology: statistical summary, statistical grouping, sociological questioning, effectivity estimation, comparative analyses.Results:1 ways of effectivity estimation educational innovation using were revealed;2 the practical recommendation for improving using educational innovation  were proved.Practical implications: educational activity in the socio-economical higher institutions.DOI: http://dx.doi.org/10.12731/2218-7405-2013-8-37

OPTICAL FIBER SENSOR TECHNOLOGIES FOR EFFICIENT AND ECONOMICAL OIL RECOVERY

Energy Technology Data Exchange (ETDEWEB)

Anbo Wang; Kristie L. Cooper; Gary R. Pickrell

2003-06-01

Efficient recovery of petroleum reserves from existing oil wells has been proven to be difficult due to the lack of robust instrumentation that can accurately and reliably monitor processes in the downhole environment. Commercially available sensors for measurement of pressure, temperature, and fluid flow exhibit shortened lifetimes in the harsh downhole conditions, which are characterized by high pressures (up to 20 kpsi), temperatures up to 250 C, and exposure to chemically reactive fluids. Development of robust sensors that deliver continuous, real-time data on reservoir performance and petroleum flow pathways will facilitate application of advanced recovery technologies, including horizontal and multilateral wells. This is the final report for the four-year program ''Optical Fiber Sensor Technologies for Efficient and Economical Oil Recovery'', funded by the National Petroleum Technology Office of the U.S. Department of Energy, and performed by the Center for Photonics Technology of the Bradley Department of Electrical and Computer Engineering at Virginia Tech from October 1, 1999 to March 31, 2003. The main objective of this research program was to develop cost-effective, reliable optical fiber sensor instrumentation for real-time monitoring of various key parameters crucial to efficient and economical oil production. During the program, optical fiber sensors were demonstrated for the measurement of temperature, pressure, flow, and acoustic waves, including three successful field tests in the Chevron/Texaco oil fields in Coalinga, California, and at the world-class oil flow simulation facilities in Tulsa, Oklahoma. Research efforts included the design and fabrication of sensor probes, development of signal processing algorithms, construction of test systems, development and testing of strategies for the protection of optical fibers and sensors in the downhole environment, development of remote monitoring capabilities allowing real

A Methodology for the Estimation of the Wind Generator Economic Efficiency

Science.gov (United States)

Zaleskis, G.

2017-12-01

Integration of renewable energy sources and the improvement of the technological base may not only reduce the consumption of fossil fuel and environmental load, but also ensure the power supply in regions with difficult fuel delivery or power failures. The main goal of the research is to develop the methodology of evaluation of the wind turbine economic efficiency. The research has demonstrated that the electricity produced from renewable sources may be much more expensive than the electricity purchased from the conventional grid.

Universal Expression of Efficiency at Maximum Power: A Quantum-Mechanical Brayton Engine Working with a Single Particle Confined in a Power-Law Trap

International Nuclear Information System (INIS)

Ye Zhuo-Lin; Li Wei-Sheng; Lai Yi-Ming; He Ji-Zhou; Wang Jian-Hui

2015-01-01

We propose a quantum-mechanical Brayton engine model that works between two superposed states, employing a single particle confined in an arbitrary power-law trap as the working substance. Applying the superposition principle, we obtain the explicit expressions of the power and efficiency, and find that the efficiency at maximum power is bounded from above by the function: η_+ = θ/(θ + 1), with θ being a potential-dependent exponent. (paper)

The impact of economic growth on environmental efficiency of the electricity sector: A hybrid window DEA methodology for the USA.

Science.gov (United States)

Halkos, George E; Polemis, Michael L

2018-04-01

This paper estimates the efficiency of the power generation sector in the USA by using Window Data Envelopment Analysis (W-DEA). We integrate radial and non-radial efficiency measurements in DEA using the hybrid measure while we extend the proposed model by considering good and undesirable outputs as separable and non separable. Then in the second stage, we perform parametric and non-parametric econometric techniques in order to model the relationship between the calculated environmental efficiencies and economic growth in attaining sustainability. Our empirical findings indicate a stable N-shape relationship between environmental efficiency and regional economic growth in the case of global and total pollutants but an inverted N-shape in the case of local pollutants. This implies that attention is required when considering local and global pollutants and the extracted environmental efficiency scores. A clear message to policy makers and government officials is that climate change which calls for economic, environmental and social concern should be analyzed according to its dispersion and regional dimension. Copyright © 2018 Elsevier Ltd. All rights reserved.

Industrial energy efficiency: Interdisciplinary perspectives on the thermodynamic, technical and economic constraints

OpenAIRE

McKenna, Russell

2009-01-01

Overreliance on energy from fossil fuels is unsustainable because of their regional depletion and associated environmental impacts. The British industrial sector accounts for around one fifth of final energy demand and one third of carbon emissions nationally. This thesis attempts to quantify the potential for industrial energy efficiency from the current baseline, by adopting thermodynamic and economic perspectives. The methodology involves a top-down analysis of energy trends within the man...

ANALYSIS OF INFLUENCE FACTORS OF ECONOMIC EFFICIENCY ON THE ECONOMY OF THE INTEGRATED STRUCTURES

Directory of Open Access Journals (Sweden)

I. P. Bogomolova

2014-01-01

Full Text Available Currently in Russia, special attention is paid to the food industry, providing a key influence on the state's economy and food security of the country. The food industry not only creates substantial part of the gross domestic product, which is one of the main sources of fillings budgets of all levels, and contributes to the strengthening of the state in world markets. These circum-stances make it necessary to increase the efficiency of industrial structures by mobilizing factors affecting the economy of enterprises, including by shifting emphasis on the integration of food industry enterprises in General competitiveness of the goods produced, the stability of the entire industry, its leading industries and organizations. The article substantiates the expediency of application of integrated structures, discusses the methods and tools of analysis of influence factors of economic efficiency on the economy of inte-grated structures. Evaluation is recommended in two key areas: assessment of the financial condition and evaluation of training and development of staff, taking into account the strategic objectives of integrated structures. The analysis makes it possible to correctly allocate financial resources and to achieve balanced economic performance management through more effective use of credit re-sources, the rational management of economic parameters optimization of the number of employees and production capacity.

The efficiency and budgeting of public hospitals: case study of iran.

Science.gov (United States)

Yusefzadeh, Hasan; Ghaderi, Hossein; Bagherzade, Rafat; Barouni, Mohsen

2013-05-01

Hospitals are the most costly and important components of any health care system, so it is important to know their economic values, pay attention to their efficiency and consider factors affecting them. The aim of this study was to assess the technical scale and economic efficiency of hospitals in the West Azerbaijan province of Iran, for which Data Envelopment Analysis (DEA) was used to propose a model for operational budgeting. This study was a descriptive-analysis that was conducted in 2009 and had three inputs and two outputs. Deap2, 1 software was used for data analysis. Slack and radial movements and surplus of inputs were calculated for selected hospitals. Finally, a model was proposed for performance-based budgeting of hospitals and health sectors using the DEA technique. The average scores of technical efficiency, pure technical efficiency (managerial efficiency) and scale efficiency of hospitals were 0.584, 0.782 and 0.771, respectively. In other words the capacity of efficiency promotion in hospitals without any increase in costs and with the same amount of inputs was about 41.5%. Only four hospitals among all hospitals had the maximum level of technical efficiency. Moreover, surplus production factors were evident in these hospitals. Reduction of surplus production factors through comprehensive planning based on the results of the Data Envelopment Analysis can play a major role in cost reduction of hospitals and health sectors. In hospitals with a technical efficiency score of less than one, the original and projected values of inputs were different; resulting in a surplus. Hence, these hospitals should reduce their values of inputs to achieve maximum efficiency and optimal performance. The results of this method was applied to hospitals a benchmark for making decisions about resource allocation; linking budgets to performance results; and controlling and improving hospitals performance.

Efficiency and economic benefits of skipjack pole and line (huhate) in central Moluccas, Indonesia

Science.gov (United States)

Siahainenia, Stevanus M.; Hiariey, Johanis; Baskoro, Mulyono S.; Waeleruny, Wellem

2017-10-01

Excess fishing capacity is a crucial problem in marine capture fisheries. This phenomenon needed to be investigated regarding sustainability and development of the fishery. This research was aimed at analyzing technical efficiency (TE) and computing financial aspects of the skipjack pole and line. Primary data were collected from the owners of the fishing units at the different size of gross boat tonnage (GT), while secondary data were gathered from official publications relating to this research. Data envelopment analysis (DEA) approach was applied to estimate technical efficiency whereas a selected financial analysis was utilized to calculate economic benefits of the skipjack pole and line business. The fishing units with a size of 26-30 GT provided a higher TE value, and also achieved larger economic benefit values than that of the other fishing units. The empirical results indicate that skipjack pole and line in the size of 26-30 GT is a good fishing gear for the business development in central Moluccas.

[Grounding public health policies in ethics and economic efficiency. SESPAS report 2010].

Science.gov (United States)

Ramiro Avilés, Miguel A; Lobo, Félix

2010-12-01

In recent times, various voices in Spain have questioned public health policies as an assault to personal freedom. The present article aims to respond to these voices with ethical and economic arguments. The scope and characteristics of this current of opinion are described. Then, starting with John Stuart Mill, the ethical principles of non-maleficence, beneficence, personal autonomy and justice, as well as related concepts taken from economic efficiency, such as externalities, monopoly, incomplete and asymmetric information, agency relationship, public goods and adverse selection, are discussed. A short mention is made of equity in economics, the welfare state and public health systems. The justification for paternalist actions by the state, as well as limits to these actions, are briefly discussed. Respect for individual freedom does not exclude the implementation of public health actions but rather demands the adoption of such policies. If these actions comply with certain conditions, they do not limit individual freedom but rather serve to protect it. Copyright © 2010 SESPAS. Published by Elsevier Espana. All rights reserved.

Ecological and economical efficiency of monitoring systems for oil and gas production on the shelf

Science.gov (United States)

Kurakin, A. L.; Lobkovsky, L. I.

2014-02-01

Requirements for signals' reliability of monitoring systems (with respect to the errors of the 1st and 2nd kinds, i.e., false alarms and skipping of danger) are deduced from the ratio of expenditures of different kinds (of exploitation expenses and losses due to accidents). The expressions obtained in the research may be used for economic foundations (and optimization) of specifications for monitoring systems. In cases when optimal parameters are not available, the sufficient condition of monitoring systems economical efficiency is presented.

Nitrogen efficiency in oats on grain yield with stability

Directory of Open Access Journals (Sweden)

José A. G. da Silva

Full Text Available ABSTRACT Nitrogen (N is the nutrient most absorbed by the oat crop. Unfavorable climate conditions decrease its efficiency, generating instability and reduction in yield. The objective of this study was to improve N use efficiency in oat grain yield by the economic value of the product and of the input and by models that scale the stability, considering systems of succession of high and reduced residual-N release in favorable and unfavorable years for cultivation. The study was conducted in the years 2013, 2014 and 2015 in two systems of succession (soybean/oat, maize/oat in randomized blocks with eight replicates, using the N-fertilizer doses of 0, 30, 60 and 120 kg ha-1. The N-fertilizer dose for maximum economic efficiency in oats should be considered based on the meteorological trends of the cultivation year. N use optimization by models that determine the stability is an innovative proposal to increase fertilization efficiency on the yield. The N-fertilizer dose of 60 kg ha-1 promotes greater efficiency with predictability and yield, regardless of the agricultural year and the system of succession.

Evaluation of economic and technical efficiency of diesel engines operation on the basis of volume combustion rate

Directory of Open Access Journals (Sweden)

І. О. Берестовой

2016-11-01

Full Text Available The article deals with a new approach to evaluation of complex efficiency of diesel engines. Traditionally, cylinder’s capacity, rotation frequency, average efficient pressure inside cylinder, piston’s stroke, average piston’s velocity, fuel specific consumption and other indices are used as generalizing criteria, characterizing diesel engine’s efficiency, but they do not reflect interrelation between engine’s complex efficiency and a set of economic, mass-dimensional, operational and ecological efficiency. The approach applied in the article makes it possible to reveal the existing and modify the existing methods of solving the problem of improving diesel engine’s efficiency with due regard to interrelation of the parameters, characterizing efficiency of their operation. Statistic analyses were carried out, on the basis of which an assumption regarding the existence of interrelation between specific fuel consumption and the analyzed engine’s parameters was made. Processing of statistical data for various analyzed functions of diesel engines helped offer a function, illustrating the link between volume combustion rate, piston’s area and nominal theoretical specific fuel consumption. Interrelation between volume combustion rate, nominal parameters of diesel operation and efficiency indices, obtained by processing statistical data of more than 500 models of diesels of different series was evaluated, the main feature of it being a mathematical trend. The analysis of the obtained function makes it possible to establish an interrelation between economic efficiency of a diesel, its main index being specific fuel consumption and volume combustion rate and design peculiarities

Economic efficiency versus social equality? The U.S. liberal model versus the European social model.

Science.gov (United States)

Navarro, Vicente; Schmitt, John

2005-01-01

This article begins by challenging the widely held view in neoliberal discourse that there is a necessary trade-off between higher efficiency and lower reduction of inequalities: the article empirically shows that the liberal, U.S. model has been less efficient economically (slower economic growth, higher unemployment) than the social model in existence in the European Union and in the majority of its member states. Based on the data presented, the authors criticize the adoption of features of the liberal model (such as deregulation of their labor markets, reduction of public social expenditures) by some European governments. The second section analyzes the causes for the slowdown of economic growth and the increase of unemployment in the European Union--that is, the application of monetarist and neoliberal policies in the institutional frame of the European Union, including the Stability Pact, the objectives and modus operandi of the European Central Bank, and the very limited resources available to the European Commission for stimulating and distributive functions. The third section details the reasons for these developments, including (besides historical considerations) the enormous influence of financial capital in the E.U. institutions and the very limited democracy. Proposals for change are included.

Efficiency Assessment of Economic International Cooperation in Development of Arctic Offshore Oil and Gas Resources

Directory of Open Access Journals (Sweden)

Polina V. Beresneva

2015-01-01

Full Text Available The research is focused on efficiency assessment of economic cooperation in development of Arctic offshore oil and gas resources. The author developed an economic model based on cost-benefit analysis (CBA. CBA is used in some countries (EU, USA, Australia as an analytic tool to make public policy decisions. CBA is based on the method of discounting cash flows associated with costs and benefits of public policy. It is assumed that all public goals are equally important inter alia, hence public bodies should opt for those initiatives that maximize public benefits for every dollar spent from the state budget. There are five stages of economic modeling: 1 the definition of public benefits and costs associated with the public initiative; 2 monetary valuation of costs and benefits; 3 the definition of discounting period and discounting rate; 4 the calculation of net present value of cash flows; 5 the comparison of initiatives' net present values. The model is built with a number of hypotheses assumed. It allows making evaluation of investments into the technology to decrease the cost of Arctic offshore oil and gas development. Moreover, the model has two scenarios describing a public policy to support technology development with international economic cooperation and without it. Under given hypotheses both scenarios return positive net present value of policies which proves that governmental initiative to support Arctic technology development is economically justified. Also the model sows that the scenario with international cooperation is more efficient from economic point of view. It is explained by two factors: the higher speed of technology transfer (due W international cooperation and the opportunity to use financial leverage (attracting the funds from foreign partners. The model allows closing the existing scientific gap between the theory of CBA method and its practical use in public decision making.

Performance and economic analysis of a plug and play regenerative brake for improving energy efficiency for traction elevators

Science.gov (United States)

Jeraputra, Chuttchaval; Tiptipakorn, Supun

2017-05-01

This paper presents performance and economic analysis of a plug and play regenerative brake for improving energy efficiency for traction elevators. The proposed regenerative brake recycles the energy loss of a dynamic brake and feeds into the grid while an elevator inverter is operating in the braking mode. According to field measurement of energy consumption, it reveals that the efficiency can be improved as much as 18%. The prototype of a regenerative brake 12 kW, 400V, 3ϕ is developed and tested on an elevator simulator. It is shown that it can transfer energy out of a DC capacitor before the dynamic brake kicks in. Further, an economic analysis is provided to carry out the payback period and the present worth equivalent to confirm economic feasibility.

Plug-in hybrid electric vehicles: Economic efficiency and market chances of different business models; Plug-in Hybridfahrzeuge: Wirtschaftlichkeit und Marktchancen verschiedener Geschaeftsmodelle

Energy Technology Data Exchange (ETDEWEB)

Hackbarth, Andre; Schuermann, Gregor [RWTH Aachen (Germany). Lehrstuhl fuer Wirtschaftswissenschaften insb. Energieoekonomik,; RWTH Aachen (DE). E.ON Energy Research Center, Institut fuer Future Energy Consumer Needs and Behavior (FCN); Madlener, Reinhard [Technische Hochschule Aachen (DE). Lehrstuhl fuer Verbrennungskraftmaschinen (VKA)

2009-07-15

The German traffic sector is strongly dependent on fossil fuels. Electric vehicles could reduce this dependence and also help to keep CO2 emissions low. Plug-in hybrid electric vehicles (PHEV) are a technology option that may facilitate the transition to electromobility. The authors investigate the economic efficiencies and amortisation periods of PHEV on the basis of two different business models, i.e. passenger cars (compact and medium-sized) and light vans. It is shown that under the assumed boundary conditions PHEV are not economically efficient at present. The influence of various parameters on economic efficiency and amortisation period is investigated by means of a sensitivity analysis. (orig.)

Modelling efficient innovative work: integration of economic and social psychological approaches

Directory of Open Access Journals (Sweden)

Babanova Yulia

2017-01-01

Full Text Available The article deals with the relevance of integration of economic and social psychological approaches to the solution of enhancing the efficiency of innovation management. The content, features and specifics of the modelling methods within each of approaches are unfolded and options of integration are considered. The economic approach lies in the generation of the integrated matrix concept of management of innovative development of an enterprise in line with the stages of innovative work and the use of the integrated vector method for the evaluation of the innovative enterprise development level. The social psychological approach lies in the development of a system of psychodiagnostic indexes of activity resources within the scope of psychological innovative audit of enterprise management and development of modelling methods for the balance of activity trends. Modelling the activity resources is based on the system of equations accounting for the interaction type of psychodiagnostic indexes. Integration of two approaches includes a methodological level, a level of empirical studies and modelling methods. There are suggested options of integrating the economic and psychological approaches to analyze available material and non-material resources of the enterprises’ innovative work and to forecast an optimal option of development based on the implemented modelling methods.

Performance analysis and comparison of an Atkinson cycle coupled to variable temperature heat reservoirs under maximum power and maximum power density conditions

International Nuclear Information System (INIS)

Wang, P.-Y.; Hou, S.-S.

2005-01-01

In this paper, performance analysis and comparison based on the maximum power and maximum power density conditions have been conducted for an Atkinson cycle coupled to variable temperature heat reservoirs. The Atkinson cycle is internally reversible but externally irreversible, since there is external irreversibility of heat transfer during the processes of constant volume heat addition and constant pressure heat rejection. This study is based purely on classical thermodynamic analysis methodology. It should be especially emphasized that all the results and conclusions are based on classical thermodynamics. The power density, defined as the ratio of power output to maximum specific volume in the cycle, is taken as the optimization objective because it considers the effects of engine size as related to investment cost. The results show that an engine design based on maximum power density with constant effectiveness of the hot and cold side heat exchangers or constant inlet temperature ratio of the heat reservoirs will have smaller size but higher efficiency, compression ratio, expansion ratio and maximum temperature than one based on maximum power. From the view points of engine size and thermal efficiency, an engine design based on maximum power density is better than one based on maximum power conditions. However, due to the higher compression ratio and maximum temperature in the cycle, an engine design based on maximum power density conditions requires tougher materials for engine construction than one based on maximum power conditions

INTEGRAL ASSESSMENT OF EFFICIENCY OF A FLEET OF AGRICULTURAL MACHINERY AND TRACTORS

Directory of Open Access Journals (Sweden)

V. M. Korotchenya

2015-01-01

Full Text Available An indicator for an integral assessment of efficiency of a fleet of agricultural machinery and tractors is proposed. Its calculating consists in multiplying partial efficiencies together: technical and price efficiency of agricultural production, and eco-efficiency of a fleet of agricultural machinery and tractors. Using an axiomatic method, the concept of efficiency of fleet was studied within broader category of productivity and in wider scales - within agriculture. The most general and obvious statements according to which efficiency of machine and tractor fleet is considered as indirectly settlement size counted proceeding from efficiency of agricultural production, were accepted as axioms. In general, efficiency is a ratio between productivity of an object in question and that of the theoretical ideal or an object with maximum productivity efficiency of which is accepted equal to unity or 100%. Technical efficiency of agricultural production characterizes the ability of an agricultural sector to produce the technically maximum output of agricultural produce obtained from the available resources (land, labor, machines, etc.. Price efficiency evaluates the ability of an agricultural sector to produce output of agricultural produce with regard to employing the optimal mix of resources given their prices. Because the theoretical ideal does not exist, efficiency of an agricultural sector, e.g. in Russia and of its fleet of agricultural machinery and tractors, is measured against agriculture of another country with maximum productivity efficiency of which is accepted as equal to unity or 100 percent. The calculation can be made on the basis of the Data Envelopment Analysis method. It is possible to calculate price and economic efficiency of Russian agriculture (fleet of agricultural machinery and tractors due to use its domestic prices.

Economic efficiency of the use of the bush vegetation from slopes of the ameliorative canals

International Nuclear Information System (INIS)

Titov, V.N.

2009-01-01

The results of calculations of the economic efficiency of the use of the bush vegetation from slopes of the ameliorative canals for fuel and energy purposes has been presented. The two variants of disposal of bushes are considered burning and conversion into fuel chips. (authors)

ICF reactor economics: identifying the high leverage design features

International Nuclear Information System (INIS)

Meier, W.R.; Hogan, W.J.

1985-01-01

Parametric studies were carried out for a heavy ion beam (HIB) fusion electric power plant to investigate the effects on the cost of electricity (COE) of variations in several design parameters. In particular, we examined the effects of maximum achievable chamber pulse rate, driver cost, target gain, electric conversion efficiency, and net electric power. We find that with a combination of improvements over our base case, HIB fusion can be economically competitive with other future power sources

Efficient method for computing the maximum-likelihood quantum state from measurements with additive Gaussian noise.

Science.gov (United States)

Smolin, John A; Gambetta, Jay M; Smith, Graeme

2012-02-17

We provide an efficient method for computing the maximum-likelihood mixed quantum state (with density matrix ρ) given a set of measurement outcomes in a complete orthonormal operator basis subject to Gaussian noise. Our method works by first changing basis yielding a candidate density matrix μ which may have nonphysical (negative) eigenvalues, and then finding the nearest physical state under the 2-norm. Our algorithm takes at worst O(d(4)) for the basis change plus O(d(3)) for finding ρ where d is the dimension of the quantum state. In the special case where the measurement basis is strings of Pauli operators, the basis change takes only O(d(3)) as well. The workhorse of the algorithm is a new linear-time method for finding the closest probability distribution (in Euclidean distance) to a set of real numbers summing to one.

Is Municipal Solid Waste Recycling Economically Efficient?

Science.gov (United States)

Lavee, Doron

2007-12-01

It has traditionally been argued that recycling municipal solid waste (MSW) is usually not economically viable and that only when externalities, long-term dynamic considerations, and/or the entire product life cycle are taken into account, recycling becomes worthwhile from a social point of view. This article explores the results of a wide study conducted in Israel in the years 2000 2004. Our results reveal that recycling is optimal more often than usually claimed, even when externality considerations are ignored. The study is unique in the tools it uses to explore the efficiency of recycling: a computer-based simulation applied to an extensive database. We developed a simulation for assessing the costs of handling and treating MSW under different waste-management systems and used this simulation to explore possible cost reductions obtained by designating some of the waste (otherwise sent to landfill) to recycling. We ran the simulation on data from 79 municipalities in Israel that produce over 60% of MSW in Israel. For each municipality, we were able to arrive at an optimal method of waste management and compare the costs associated with 100% landfilling to the costs born by the municipality when some of the waste is recycled. Our results indicate that for 51% of the municipalities, it would be efficient to adopt recycling, even without accounting for externality costs. We found that by adopting recycling, municipalities would be able to reduce direct costs by an average of 11%. Through interviews conducted with representatives of municipalities, we were also able to identify obstacles to the utilization of recycling, answering in part the question of why actual recycling levels in Israel are lower than our model predicts they should be.

Economic efficiency, independent power producers and wheeling

International Nuclear Information System (INIS)

Fytche, E.L.

1991-01-01

Traditionally, electric utilities have sought to decrease the cost of production by such means as merit order running of machines, by improving equipment efficiency, by fuel mix, by interconnection and exchange of cheap energy, and by unit participation and firm purchase and sale contracts for long term savings. In the ''new look'', it was suggested that financial and technical competition is not enough, and that economic gains could be achieved through fostering independent power producers, i.e., non-utility generators (NUG's), greater exchanges of economy energy, unrestricted access to the transmission network for moving cheap energy through facilities of third parties, and by bidding to supply energy to non-generators, etc. Naturally, the proposals to change the comfortable and time-hallowed practices by which utility business had been carried out in the past has created an ongoing debate both pro and con, much of it acrimonious, and, unfortunately, some of it ill-informed. The turmoil in the political context impacts on a utility's technical and financial planners, and on their managements, all of whom contribute to justifying and maintaining the flow of capital to the industry and energy to the customer. They must now seek new ways to implement both short- and long-term planning of power supply. Some of the factors that were neglected in the past will demand more attention in the future. This paper discusses some of the costs that, under the anticipated modus operandi, must be integrated into the planning process while meeting the new challenges. The costs are those relating to third-parties, costs of transmission constraints, and costs of wheeling. The opinion is ventured that much of the efficiency improvement anticipated during the debate has already been achieved by conscientious utility managements. (author)

Impact of energy efficiency measures on the economic value of buildings

International Nuclear Information System (INIS)

Popescu, Daniela; Bienert, Sven; Schuetzenhofer, Christian; Boazu, Rodica

2012-01-01

Highlights: → Market driven reasons can strengthen implementation of energy policies in buildings. → Methods that quantify the added value due to energy performance are developed. → Recommendations on how they can be incorporated in the financial analysis are presented. → Case studies on some existing condominiums from Romania are analyzed. → The market sensitivity to energy efficiency measures is also in the focus. -- Abstract: A main objective of energy policies is to make all levels of the society, from governments to citizen, interested in increasing the energy efficiency of buildings. One of the most important barriers in implementation of energy policies is that the cost of potential energy savings, typically considered being the only financial benefit, does not sufficiently motivate investments. The target is therefore to identify further possible drivers pushing positive reaction according to energy saving action. The paper discusses whether a market-based instrument, capturing the increase of the economic value of energy efficient buildings, can be also used. Methods that quantify the added value due to energy performance, including recommendations on how they can be incorporated in the financial analysis of investments in weatherization, are developed. By applying the proposed methods, the payback period of investments in energy efficiency measures depends on two factors: potential energy savings and the added value to the property. Case studies on some existing condominiums from Romania are analyzed and provide evidence to the research question. The market sensitivity to energy efficiency measures, the possibility of an intangible added value as well as the impact to financial investment decisions is subsequently in the focus.

Economic values for health and feed efficiency traits of dual-purpose cattle in marginal areas.

Science.gov (United States)

Krupová, Z; Krupa, E; Michaličková, M; Wolfová, M; Kasarda, R

2016-01-01

Economic values of clinical mastitis, claw disease, and feed efficiency traits along with 16 additional production and functional traits were estimated for the dairy population of the Slovak Pinzgau breed using a bioeconomic approach. In the cow-calf population (suckler cow population) of the same breed, the economic values of feed efficiency traits along with 15 further production and functional traits were calculated. The marginal economic values of clinical mastitis and claw disease incidence in the dairy system were -€ 70.65 and -€ 26.73 per case per cow and year, respectively. The marginal economic values for residual feed intake were -€ 55.15 and -€ 54.64/kg of dry matter per day for cows and breeding heifers in the dairy system and -€ 20.45, -€ 11.30, and -€ 6.04/kg of dry matter per day for cows, breeding heifers, and fattened animals in the cow-calf system, respectively, all expressed per cow and year. The sums of the relative economic values for the 2 new health traits in the dairy system and for residual feed intake across all cattle categories in both systems were 1.4 and 8%, respectively. Within the dairy production system, the highest relative economic values were for milk yield (20%), daily gain of calves (20%), productive lifetime (10%), and cow conception rate (8%). In the cow-calf system, the most important traits were weight gain of calves from 120 to 210 d and from birth to 120 d (19 and 14%, respectively), productive lifetime (17%), and cow conception rate (13%). Based on the calculation of economic values for traits in the dual-purpose Pinzgau breed, milk production and growth traits remain highly important in the breeding goal, but their relative importance should be adapted to new production and economic conditions. The economic importance of functional traits (especially of cow productive lifetime and fertility) was sufficiently high to make the inclusion of these traits into the breeding goal necessary. An increased interest

Production of biosolid fuels from municipal sewage sludge: Technical and economic optimisation.

Science.gov (United States)

Wzorek, Małgorzata; Tańczuk, Mariusz

2015-08-01

The article presents the technical and economic analysis of the production of fuels from municipal sewage sludge. The analysis involved the production of two types of fuel compositions: sewage sludge with sawdust (PBT fuel) and sewage sludge with meat and bone meal (PBM fuel). The technology of the production line of these sewage fuels was proposed and analysed. The main objective of the study is to find the optimal production capacity. The optimisation analysis was performed for the adopted technical and economic parameters under Polish conditions. The objective function was set as a maximum of the net present value index and the optimisation procedure was carried out for the fuel production line input capacity from 0.5 to 3 t h(-1), using the search step 0.5 t h(-1). On the basis of technical and economic assumptions, economic efficiency indexes of the investment were determined for the case of optimal line productivity. The results of the optimisation analysis show that under appropriate conditions, such as prices of components and prices of produced fuels, the production of fuels from sewage sludge can be profitable. In the case of PBT fuel, calculated economic indexes show the best profitability for the capacity of a plant over 1.5 t h(-1) output, while production of PBM fuel is beneficial for a plant with the maximum of searched capacities: 3.0 t h(-1). Sensitivity analyses carried out during the investigation show that influence of both technical and economic assessments on the location of maximum of objective function (net present value) is significant. © The Author(s) 2015.

An Efficient Meta Heuristic Algorithm to Solve Economic Load Dispatch Problems

Directory of Open Access Journals (Sweden)

R Subramanian

2013-12-01

Full Text Available The Economic Load Dispatch (ELD problems in power generation systems are to reduce the fuel cost by reducing the total cost for the generation of electric power. This paper presents an efficient Modified Firefly Algorithm (MFA, for solving ELD Problem. The main objective of the problems is to minimize the total fuel cost of the generating units having quadratic cost functions subjected to limits on generator true power output and transmission losses. The MFA is a stochastic, Meta heuristic approach based on the idealized behaviour of the flashing characteristics of fireflies. This paper presents an application of MFA to ELD for six generator test case system. MFA is applied to ELD problem and compared its solution quality and computation efficiency to Genetic algorithm (GA, Differential Evolution (DE, Particle swarm optimization (PSO, Artificial Bee Colony optimization (ABC, Biogeography-Based Optimization (BBO, Bacterial Foraging optimization (BFO, Firefly Algorithm (FA techniques. The simulation result shows that the proposed algorithm outperforms previous optimization methods.

Economic feasibility of an energy efficiency project for a steam distribution system in a chemical industry

Directory of Open Access Journals (Sweden)

Flavia Melo Menezes

2017-12-01

Full Text Available The burning of fossil fuels majorly contributes to the increase in global warming, and it represents 93% of greenhouse gases emissions in the chemical industry. Most of the energy demand in this sector is associated with steam systems, where 1/3 of the energy efficiency opportunities are located in its distribution system. However, most of the literature focuses on the design of new systems. Those that deal with existing systems, not always use simple and available methods. Furthermore, they address energy losses of steam systems only due to thermal insulation, ignoring those due to leakages of traps. Given this context, the purpose of this paper is to determine the economic feasibility of an energy efficiency project for a steam distribution system in a chemical industry, located in the metropolitan region of Salvador, Brazil. First, the energy lost in the steam distribution system through heat insulation and steam traps was estimated by applying thermodynamic principles, and technic consulting, respectively. Then, investments were estimated using commercial prices for new thermal insulation and steam traps. Finally, an economic evaluation of the improvement project was made, through the construction of a cash flow, and calculation of economic indicators: payback time, net present value (NPV, and internal rate of return (IRR. Economic indicators showed that the project is economically viable. The NPV and IRR reached approximately 5 million reais, and 66% per year, respectively. Additionally, this project also had social and environmental benefits, such as a reduction in greenhouse gases emissions, and increased local water availability.

Health economics, equity, and efficiency: are we almost there?

Science.gov (United States)

Ferraz, Marcos Bosi

2015-01-01

Health care is a highly complex, dynamic, and creative sector of the economy. While health economics has to continue its efforts to improve its methods and tools to better inform decisions, the application needs to be aligned with the insights and models of other social sciences disciplines. Decisions may be guided by four concept models based on ethical and distributive justice: libertarian, communitarian, egalitarian, and utilitarian. The societal agreement on one model or a defined mix of models is critical to avoid inequity and unfair decisions in a public and/or private insurance-based health care system. The excess use of methods and tools without fully defining the basic goals and philosophical principles of the health care system and without evaluating the fitness of these measures to reaching these goals may not contribute to an efficient improvement of population health.

Maximum Power Tracking by VSAS approach for Wind Turbine, Renewable Energy Sources

Directory of Open Access Journals (Sweden)

Nacer Kouider Msirdi

2015-08-01

Full Text Available This paper gives a review of the most efficient algorithms designed to track the maximum power point (MPP for catching the maximum wind power by a variable speed wind turbine (VSWT. We then design a new maximum power point tracking (MPPT algorithm using the Variable Structure Automatic Systems approach (VSAS. The proposed approachleads efficient algorithms as shown in this paper by the analysis and simulations.

Economics of appliance efficiency

International Nuclear Information System (INIS)

Tiedemann, K.H.

2009-01-01

Several significant developments occurred in 2001 that affect the impact of market transformation programs. This paper presented and applied an econometric approach to the identification and estimation of market models for refrigerators, clothes washers, dishwashers and room air conditioners. The purpose of the paper was to understand the impact of energy conservation policy developments on sales of energy efficient appliances. The paper discussed the approach with particular reference to building a database of sales and drivers of sales using publicly available information; estimation of the determinants of sales using econometric models; and estimation of the individual impacts of prices, gross domestic product (GDP) and energy conservation policies on sales using regression results. Market and policy developments were also presented, such as change a light, save the world promotion; the California energy crisis; and the Pacific Northwest drought induced hydro power shortage. It was concluded that an increase in GDP increased the sales of both more efficient and less efficient refrigerators, clothes washers, dishwashers, and room air conditioners. An increase in electricity price increased sales of Energy Star refrigerators, clothes washers, dishwashers, and room air conditioners. 4 refs., 8 tabs.

Particle Swarm Optimization Based of the Maximum Photovoltaic ...

African Journals Online (AJOL)

Photovoltaic electricity is seen as an important source of renewable energy. The photovoltaic array is an unstable source of power since the peak power point depends on the temperature and the irradiation level. A maximum peak power point tracking is then necessary for maximum efficiency. In this work, a Particle Swarm ...

Maximum Water Hammer Sensitivity Analysis

OpenAIRE

Jalil Emadi; Abbas Solemani

2011-01-01

Pressure waves and Water Hammer occur in a pumping system when valves are closed or opened suddenly or in the case of sudden failure of pumps. Determination of maximum water hammer is considered one of the most important technical and economical items of which engineers and designers of pumping stations and conveyance pipelines should take care. Hammer Software is a recent application used to simulate water hammer. The present study focuses on determining significance of ...

Maximum entropy prior uncertainty and correlation of statistical economic data

NARCIS (Netherlands)

Dias, Rodriques J.F.

2016-01-01

Empirical estimates of source statistical economic data such as trade flows, greenhouse gas emissions or employment figures are always subject to uncertainty (stemming from measurement errors or confidentiality) but information concerning that uncertainty is often missing. This paper uses concepts

Evaluation of the influence of economic groups on the efficiency and quality of service of water companies: an empirical approach for Chile.

Science.gov (United States)

Molinos-Senante, María; Farías, Rodrigo

2018-06-04

The privatization of water and sewerage services (WSS) has led to the foundation of water economic groups, which integrate several water companies and have gained notable importance at the global level. In the framework of benchmarking studies, there are no prior studies exploring the impact that economic groups have on the efficiency and quality of service provided by water companies. This study investigates, for the first time, whether the membership of water companies in an economic group influences their performance. Quantity- and quality-adjusted efficiency scores were computed using data envelopment analysis models. An empirical application was developed for the Chilean water industry since most of their water companies are private and belong to an economic group. The results show that independent water companies provide WSS with better quality than do water companies that belong to an economic group. From a statistical point of view, it was evident that membership in an economic group impacts both the quantity- and quality-adjusted efficiency scores of water companies. The results of this study illustrate that applying the model-firm regulation to the Chilean water industry has significant drawbacks that should be addressed by the water regulator to promote the long-term sustainability of the water industry.

Estimation of the economical and ecological efficiency of the solar heat supply in Russia

International Nuclear Information System (INIS)

Marchenko, O.V.; Solomin, S.V.

2001-01-01

One carried out numerical study of application efficiency of solar heat supply systems in the climatic conditions of Russia with regard to their economical competitiveness with organic fuel heat conventional sources and role in reduction of greenhouse gas releases. One defined the regions where (under certain conditions) application of solar energy to generate low-potential heat may be reasonable [ru

Improved efficiency of maximum likelihood analysis of time series with temporally correlated errors

Science.gov (United States)

Langbein, John

2017-08-01

Most time series of geophysical phenomena have temporally correlated errors. From these measurements, various parameters are estimated. For instance, from geodetic measurements of positions, the rates and changes in rates are often estimated and are used to model tectonic processes. Along with the estimates of the size of the parameters, the error in these parameters needs to be assessed. If temporal correlations are not taken into account, or each observation is assumed to be independent, it is likely that any estimate of the error of these parameters will be too low and the estimated value of the parameter will be biased. Inclusion of better estimates of uncertainties is limited by several factors, including selection of the correct model for the background noise and the computational requirements to estimate the parameters of the selected noise model for cases where there are numerous observations. Here, I address the second problem of computational efficiency using maximum likelihood estimates (MLE). Most geophysical time series have background noise processes that can be represented as a combination of white and power-law noise, 1/f^{α } with frequency, f. With missing data, standard spectral techniques involving FFTs are not appropriate. Instead, time domain techniques involving construction and inversion of large data covariance matrices are employed. Bos et al. (J Geod, 2013. doi: 10.1007/s00190-012-0605-0) demonstrate one technique that substantially increases the efficiency of the MLE methods, yet is only an approximate solution for power-law indices >1.0 since they require the data covariance matrix to be Toeplitz. That restriction can be removed by simply forming a data filter that adds noise processes rather than combining them in quadrature. Consequently, the inversion of the data covariance matrix is simplified yet provides robust results for a wider range of power-law indices.

Identifying heavy-ion-beam fusion design and system features with high economic leverage

International Nuclear Information System (INIS)

Meier, W.R.; Hogan, W.J.

1985-01-01

We have conducted parametric economic studies for heavy-ion-beam fusion electric power plants. We examined the effects on the cost of electricity of several design parameters: maximum achievable chamber pulse rate, driver cost, target gain, and electric conversion efficiency, and net electric power. We found with reasonable assumptions on driver cost, target gain, and electric conversion efficiency, a 2 to 3 GWe heavy-ion-beam fusion power plant, with a chamber pulse rate of 5 to 10 Hz, can be competitive with nuclear and coal power plants

ECONOMIC EFFICIENCY ANALYSIS OF ORGANIC CROP AND ANIMAL FARMS IN ROMANIA. COMPARATIVE EVOLUTIONS

Directory of Open Access Journals (Sweden)

Alexandra MUSCĂNESCU

2013-10-01

Full Text Available The organic sector in our country, although as shown in continuous development, faces a multitude of problems: the climatic conditions of our country, characterized by periods of drought in many parts of the country, high input prices, the majority of which are imported; difficulties in identifying markets for products, reduced subsidies, standardized conditions difficult to meet, etc. The problems the sector is facing reflect in the organization of the production activity and hence the economic performance of farm production. Accordingly, the aim of this paper was to analyze on the basis of annual financial and accounting information collected in the two vegetable farms and the two animal breeding farms, their efficiency / inefficiency, and the results were compared to identify the causes of the differences obtained in the efficiency at a farm level. The results obtained reveal a higher level of return on integrated vegetable farm in a joint recovery and a high efficiency for chain integrated animal farms.

Optimization model for school transportation design based on economic and social efficiency

Energy Technology Data Exchange (ETDEWEB)

Heddebaut, O.; Ciommo, F. di

2016-07-01

The purpose of this paper is to design a model that allows to suggest new planning proposals on school transport, so that greater efficiency operational will be achieved. It is a multi-objective optimization problem including the minimization of the cost of busing and minimizes the total travel time of all students. The foundation of the model is the planning routes made by bus due to changes in the starting time in schools, so the buses are able to perform more than one route. The methodology is based on the School Bus Routing Problem, so that routes from different schools within a given time window are connected, and within the restrictions of the problem, the system costs are minimized. The proposed model is programmed to be applied in any generic case. This is a multi-objective problem, in which there will be several possible solutions, depending on the weight to be assigned to each of the variables involved, economic point of view versus social point of view. Therefore, the proposed model is helpful for policy planning school transportation, supporting the decision making under conditions of economic and social efficiency. The model has been applied in some schools located in an area of Cantabria (Spain), resulting in 71 possible optimal options that minimize the cost of school transport between 2,7% and 35,1% regarding to the current routes of school transport, with different school start time and minimum travel time for students. (Author)

The Economic Aspects of Improving the Efficiency of Activities of Ukrainian Enterprises

Directory of Open Access Journals (Sweden)

Naboka Serhii O.

2017-12-01

Full Text Available The only possibility to ensure a high rate of growth of economic efficiency of production is a result of transition to a predominantly intensive type of development, especially for domestic enterprises in current conditions. The article considers, which concrete factors of the external environment of enterprise impact its activity in the present time and on the territory of Ukraine, and also substantiates the necessity of transition to the mode of «intensification». Scientific novelty consists in approbation of the method of research of the degree of intensification of activity on the example of one of the enterprises of Kharkiv, carrying out foreign economic activity. The system of the scientific and special methods was used: system approach; methods of analysis and synthesis of grouping; economic-mathematical method – the method of analysis of production intensification – to determine the degree of intensity/extensiveness of production at the researched enterprise. The calculations allowed to determine that the relative saving of the aggregate resources at the researched enterprise, using this method, amounted to more than 16 million UAH. Thus, it is possible to speak about expediency of use of the presented method in practice, especially in view of the current condition of enterprises of Ukraine.

Economic potentials of CHP connected to district heat systems in Germany. Implementation of the EU Efficiency Directive

International Nuclear Information System (INIS)

Eikmeier, Bernd

2015-01-01

The EU Efficiency Directive (2012/27/EU) is requiring all member states to carry out an evaluation of the potential for highly efficient CHP and the efficient use of district heating and cooling by December 2015. The German Federal Ministry of Economic Affairs and Energy appointed this task to the Fraunhofer Institute for Manufacturing and Advanced Materials, division for Energy Systems Analysis (formerly Bremer Energie Institut) in conjunction with other partners. The results for the sector district- and communal heating with CHP, sub-sectors private households, trade and services industry, are presented in this article.

Energy efficiency

International Nuclear Information System (INIS)

2010-01-01

After a speech of the CEA's (Commissariat a l'Energie Atomique) general administrator about energy efficiency as a first rank challenge for the planet and for France, this publications proposes several contributions: a discussion of the efficiency of nuclear energy, an economic analysis of R and D's value in the field of fourth generation fast reactors, discussions about biofuels and the relationship between energy efficiency and economic competitiveness, and a discussion about solar photovoltaic efficiency

A Flexible Maximum Power Point Tracking Control Strategy Considering Both Conversion Efficiency and Power Fluctuation for Large-inertia Wind Turbines

Directory of Open Access Journals (Sweden)

Hongmin Meng

2017-07-01

Full Text Available In wind turbine control, maximum power point tracking (MPPT control is the main control mode for partial-load regimes. Efficiency potentiation of energy conversion and power smoothing are both two important control objectives in partial-load regime. However, on the one hand, low power fluctuation signifies inefficiency of energy conversion. On the other hand, enhancing efficiency may increase output power fluctuation as well. Thus the two objectives are contradictory and difficult to balance. This paper proposes a flexible MPPT control framework to improve the performance of both conversion efficiency and power smoothing, by adaptively compensating the torque reference value. The compensation was determined by a proposed model predictive control (MPC method with dynamic weights in the cost function, which improved control performance. The computational burden of the MPC solver was reduced by transforming the cost function representation. Theoretical analysis proved the good stability and robustness. Simulation results showed that the proposed method not only kept efficiency at a high level, but also reduced power fluctuations as much as possible. Therefore, the proposed method could improve wind farm profits and power grid reliability.

Thermo-economic optimization of Regenerative Organic Rankine Cycle for waste heat recovery applications

International Nuclear Information System (INIS)

Imran, Muhammad; Park, Byung Sik; Kim, Hyouck Ju; Lee, Dong Hyun; Usman, Muhammad; Heo, Manki

2014-01-01

Highlights: • Thermo-economic optimization of regenerative ORC is performed. • Optimization is performed using multi objective genetic algorithm. • Objective function is maximum cycle efficiency and minimum specific investment. • Evaporation pressure, pinch point and superheat are decision variables. • Sensitivity analysis is performed to investigate effect of decision variables. - Abstract: Organic Rankine Cycle (ORC) is low grade and waste heat conversion technology. The current article deal with the thermo-economic optimization of basic ORC and regenerative ORC for waste heat recovery applications under constant heat source condition. Thermal efficiency and specific investment cost of basic ORC, single stage regenerative and double stage regenerative ORC has been optimized by using Non-dominated Sorting Genetic Algorithm-II (NSGA-II). Maximum thermal efficiency and minimum specific investment cost were selected as objective functions and relative increase in thermal efficiency and cost has been analyzed taking the basic ORC as base case. The constraint set consist of evaporation pressure, superheat, pinch point temperature difference in evaporator and condenser. The optimization was performed for five different working fluids. The optimization result show that R245fa is best working under considered conditions and basic ORC has low specific investment cost and thermal efficiency compared to regenerative ORC. R245fa is low boiling organic fluid, which has high degree of thermal stability and compatible with common construction materials of ORC. The average increase in thermal efficiency from basic ORC to single stage regenerative ORC was 1.01% with an additional cost of 187 $/kW while from basic ORC to double stage regenerative ORC was 1.45% with an average increase in cost of 297 $/kW. The sensitivity analysis was also performed to investigate the effect of operating conditions which show that evaporation pressure has promising effect on thermal

Efficiency assessment of wastewater treatment plants: A data envelopment analysis approach integrating technical, economic, and environmental issues.

Science.gov (United States)

Castellet, Lledó; Molinos-Senante, María

2016-02-01

The assessment of the efficiency of wastewater treatment plants (WWTPs) is essential to compare their performance and consequently to identify the best operational practices that can contribute to the reduction of operational costs. Previous studies have evaluated the efficiency of WWTPs using conventional data envelopment analysis (DEA) models. Most of these studies have considered the operational costs of the WWTPs as inputs, while the pollutants removed from wastewater are treated as outputs. However, they have ignored the fact that each pollutant removed by a WWTP involves a different environmental impact. To overcome this limitation, this paper evaluates for the first time the efficiency of a sample of WWTPs by applying the weighted slacks-based measure model. It is a non-radial DEA model which allows assigning weights to the inputs and outputs according their importance. Thus, the assessment carried out integrates environmental issues with the traditional "techno-economic" efficiency assessment of WWTPs. Moreover, the potential economic savings for each cost item have been quantified at a plant level. It is illustrated that the WWTPs analyzed have significant room to save staff and energy costs. Several managerial implications to help WWTPs' operators make informed decisions were drawn from the methodology and empirical application carried out. Copyright © 2015 Elsevier Ltd. All rights reserved.

THE ROLE OF ECONOMIC EFFICIENCY OF ACCOMMODATION UNITS IN DETERMINATION OF PURCHASE INTENTIONS OF TOURIST SERVICES

Directory of Open Access Journals (Sweden)

Simona Cristina Martin

2014-10-01

Full Text Available The indicators of demand distribution for various types of accommodation provide information regarding changing tourist preferences for different ways of tourist accommodation. Appreciation of economic efficiency for hotels activity is done through quantitative results obtained in accommodation units. For this purpose it uses, currently, a partial or synthetic indicators system. Taking into account the fact that, in appreciation of hotel business, it must start from the premise that it may not be fully reflected only in terms of economic results, but also through social results, appear obvious the need to maintain costs at a level that satisfies both requirements at the same time. Achieving superior social-financial indicators, remains one of the main goals also in hotel activities, but do not be overlooked the fact that it is necessary that these indicators must be obtained by ensuring a higher level of satisfaction of consumers requirements. Only simultaneous achievement of these two objectives can provide raising efficiency in accommodation sector.

Efficient reliability analysis of structures with the rotational quasi-symmetric point- and the maximum entropy methods

Science.gov (United States)

Xu, Jun; Dang, Chao; Kong, Fan

2017-10-01

This paper presents a new method for efficient structural reliability analysis. In this method, a rotational quasi-symmetric point method (RQ-SPM) is proposed for evaluating the fractional moments of the performance function. Then, the derivation of the performance function's probability density function (PDF) is carried out based on the maximum entropy method in which constraints are specified in terms of fractional moments. In this regard, the probability of failure can be obtained by a simple integral over the performance function's PDF. Six examples, including a finite element-based reliability analysis and a dynamic system with strong nonlinearity, are used to illustrate the efficacy of the proposed method. All the computed results are compared with those by Monte Carlo simulation (MCS). It is found that the proposed method can provide very accurate results with low computational effort.

Methodological approach to simulation and choice of ecologically efficient and energetically economic wind turbines (WT)

Science.gov (United States)

Bespalov, Vadim; Udina, Natalya; Samarskaya, Natalya

2017-10-01

Use of wind energy is related to one of the prospective directions among renewed energy sources. A methodological approach is reviewed in the article to simulation and choice of ecologically efficient and energetically economic wind turbines on the designing stage taking into account characteristics of natural-territorial complex and peculiarities of anthropogenic load in the territory of WT location.

Thermodynamic, economic and thermo-economic optimization of a new proposed organic Rankine cycle for energy production from geothermal resources

International Nuclear Information System (INIS)

Kazemi, Neda; Samadi, Fereshteh

2016-01-01

Highlights: • A new cycle was designed to improve basic organic Rankine cycle performance. • Peng Robinson equation of state was used to obtain properties of working fluids. • Operating parameters were optimized with three different objective functions. • Efficiency of new organic Rankine cycle is higher than other considered cycles. • Return on investment of new cycle for Iran is more than France and America. - Abstract: The main goal of this study is to propose and investigate a new organic Rankine cycle based on three considered configurations: basic organic Rankine cycle, regenerative organic Rankine cycle and two-stage evaporator organic Rankine cycle in order to increase electricity generation from geothermal sources. To analyze the considered cycles’ performance, thermodynamic (energy and exergy based on the first and second laws of thermodynamics) and economic (specific investment cost) models are investigated. Also, a comparison of cycles modeling results is carried out in optimum conditions according to different optimization which consist thermodynamic, economic and thermo-economic objective functions for maximizing exergy efficiency, minimizing specific investment cost and applying a multi-objective function in order to maximize exergy efficiency and minimize specific investment cost, respectively. Optimized operating parameters of cycles include evaporators and regenerative temperatures, pinch point temperature difference of evaporators and degree of superheat. Furthermore, Peng Robinson equation of state is used to obtain thermodynamic properties of isobutane and R123 which are selected as dry and isentropic working fluids, respectively. The results of optimization indicate that, thermal and exergy efficiencies increase and exergy destruction decrease especially in evaporators for both working fluids in new proposed organic Rankine cycle compared to the basic organic Rankine cycle. Moreover, the amount of specific investment cost in new

Economic efficiency substantiation of information products practical online promotion on the mechanical engineering plants

OpenAIRE

Roman Oksentyuk

2015-01-01

The profitability ratio ROI and its adaptation to calculate the economic efficiency of online advertising campaign has been analyzed. Investment profitability factor enables to estimate to what extent the advertising costs in the global network are justified and profitable for your business. The ratio use on the Ternopil mechanical engineering plants websites as a case study has been investigated by the author of the article. Such indices as the number...

Assessing efficiency and economic viability of rainwater harvesting systems for meeting non-potable water demands in four climatic zones of China

Science.gov (United States)

Zhang, S.; Jing, X.

2017-12-01

Rainwater harvesting is now increasingly used to manage urban flood and alleviate water scarcity crisis. In this study, a computational tool based on water balance equation is developed to assess stormwater capture and water saving efficiency and economic viability of rainwater harvesting systems (RHS) in eight cities across four climatic zones of China. It requires daily rainfall, contributing area, runoff losses, first flush volume, storage capacity, daily water demand and economic parameters as inputs. Three non-potable water demand scenarios (i.e., toilet flushing, lawn irrigation, and combination of them) are considered. The water demand for lawn irrigation is estimated using the Cropwat 8.0 and Climwat 2.0. Results indicate that higher water saving efficiency and water supply time reliability can be achieved for RHS with larger storage capacities, for lower water demand scenarios and located in more humid regions, while higher stormwater capture efficiency is associated with larger storage capacity, higher water demand scenarios and less rainfall. For instance, a 40 m3 RHS in Shanghai (humid climate) for lawn irrigation can capture 17% of stormwater, while its water saving efficiency and time reliability can reach 96 % and 98%, respectively. The water saving efficiency and time reliability of a 20 m3 RHS in Xining (semi-arid climate) for toilet flushing are 19% and 16%, respectively, but it can capture 63% of stormwater. With the current values of economic parameters, economic viability of RHS can be achieved in humid and semi-humid regions for reasonably designed RHS; however, it is not financially viable to install RHS in arid regions as the benefit-cost ratio is much smaller than 1.0.

MAXIMUM POWEWR POINT TRACKING SYSTEM FOR PHOTOVOLTAIC STATION: A REVIEW

Directory of Open Access Journals (Sweden)

I. Elzein

2015-01-01

Full Text Available In recent years there has been a growing attention towards the use of renewable energy sources. Among them solar energy is one of the most promising green energy resources due to its environment sustainability and inexhaustibility. However photovoltaic systems (PhV suffer from big cost of equipment and low efficiency. Moreover, the solar cell V-I characteristic is nonlinear and varies with irradiation and temperature. In general, there is a unique point of PhV operation, called the Maximum Power Point (MPP, in which the PV system operates with maximum efficiency and produces its maximum output power. The location of the MPP is not known in advance, but can be located, either through calculation models or by search algorithms. Therefore MPPT techniques are important to maintain the PV array’s high efficiency. Many different techniques for MPPT are discussed. This review paper hopefully will serve as a convenient tool for future work in PhV power conversion.

[Analysis of grey correlation between energy consumption and economic growth in Liaoning Province, China.

Science.gov (United States)

Wang, Li; Xi, Feng Ming; Wang, Jiao Yue

2016-03-01

The contradiction between energy consumption and economic growth is increasingly prominent in China. Liaoning Province as one of Chinese heavy industrial bases, consumes a large amount of energy. Its economic development has a strong dependence on energy consumption, but the energy in short supply become more apparent. In order to further understand the relationship between energy consumption and economic growth and put forward scientific suggestions on low carbon development, we used the grey correlation analysis method to separately examine the relevance of economic growth with energy consumption industries and energy consumption varieties through analy sis of energy consumption and economic growth data in Liaoning Province from 2000 to 2012. The results showed that the wholesale and retail sector and hotel and restaurant sector were in the minimum energy consumption in all kinds of sectors, but they presented the closest connection with the economic growth. Although industry energy consumption was the maximum, the degree of connection between industry energy consumption and economic growth was weak. In all types of energy consumption, oil and hydro-power consumption had a significant connection with economic growth. However, the degree of connection of coal consumption with economic growth was not significant, which meant that coal utilization efficiency was low. In order to achieve low carbon and sustainable development, Liaoning Province should transform the economic growth mode, adjust industry structure, optimize energy structure, and improve energy utilization efficiency, especially promote producer services and develop clean and renewable energy.

Evaluation method of economic efficiency of industrial scale research based on an example of coking blend pre-drying technology

Directory of Open Access Journals (Sweden)

Żarczyński Piotr

2017-01-01

Full Text Available The research on new and innovative solutions, technologies and products carried out on an industrial scale is the most reliable method of verifying the validity of their implementation. The results obtained in this research method give almost one hundred percent certainty although, at the same time, the research on an industrial scale requires the expenditure of the highest amount of money. Therefore, this method is not commonly applied in the industrial practices. In the case of the decision to implement new and innovative technologies, it is reasonable to carry out industrial research, both because of the cognitive values and its economic efficiency. Research on an industrial scale may prevent investment failure as well as lead to an improvement of technologies, which is the source of economic efficiency. In this paper, an evaluation model of economic efficiency of the industrial scale research has been presented. This model is based on the discount method and the decision tree model. A practical application of this proposed evaluation model has been presented based on an example of the coal charge pre-drying technology before coke making in a coke oven battery, which may be preceded by industrial scale research on a new type of coal charge dryer.

Economics of Agroforestry

Science.gov (United States)

D. Evan Mercer; Frederick W. Cubbage; Gregory E. Frey

2014-01-01

This chapter provides principles, literature and a case study about the economics of agroforestry. We examine necessary conditions for achieving efficiency in agroforestry system design and economic analysis tools for assessing efficiency and adoptability of agroforestry. The tools presented here (capital budgeting, linear progranuning, production frontier analysis...

Measurement of the Maximum Frequency of Electroglottographic Fluctuations in the Expiration Phase of Volitional Cough as a Functional Test for Cough Efficiency.

Science.gov (United States)

Iwahashi, Toshihiko; Ogawa, Makoto; Hosokawa, Kiyohito; Kato, Chieri; Inohara, Hidenori

2017-10-01

The hypotheses of the present study were that the maximum frequency of fluctuation of electroglottographic (EGG) signals in the expiration phase of volitional cough (VC) reflects the cough efficiency and that this EGG parameter is affected by impaired laryngeal closure, expiratory effort strength, and gender. For 20 normal healthy adults and 20 patients diagnosed with unilateral vocal fold paralysis (UVFP), each participant was fitted with EGG electrodes on the neck, had a transnasal laryngo-fiberscope inserted, and was asked to perform weak/strong VC tasks while EGG signals and a high-speed digital image of the larynx were recorded. The maximum frequency was calculated in the EGG fluctuation region coinciding with vigorous vocal fold vibration in the laryngeal HSDIs. In addition, each participant underwent spirometry for measurement of three aerodynamic parameters, including peak expiratory air flow (PEAF), during weak/strong VC tasks. Significant differences were found for both maximum EGG frequency and PEAF between the healthy and UVFP groups and between the weak and strong VC tasks. Among the three cough aerodynamic parameters, PEAF showed the highest positive correlation with the maximum EGG frequency. The correlation coefficients between the maximum EGG frequency and PEAF recorded simultaneously were 0.574 for the whole group, and 0.782/0.717/0.823/0.688 for the male/female/male-healthy/male-UVFP subgroups, respectively. Consequently, the maximum EGG frequency measured in the expiration phase of VC was shown to reflect the velocity of expiratory airflow to some extent and was suggested to be affected by vocal fold physical properties, glottal closure condition, and the expiratory function.

Economic effects of corruption in judiciary

Directory of Open Access Journals (Sweden)

Begović Boris

2005-01-01

Full Text Available The aim of the paper was to explore economic effects of corruption in judiciary. The examination included the analysis of economic features of judiciary and economic mechanisms of corruption in judiciary within the theoretical framework of Backer's model of criminal behavior. The analysis demonstrates that corruption in judiciary violates the rule of law, hence undermines the fundaments of market economy and specialization, i.e. social division of labor as the ground for improving economic efficiency. As to the static economic efficiency, the most important effect of corruption in judiciary is transaction costs that are generated and the consequent allocative inefficiency. As to the dynamic economic efficiency, corruption decreases economic growth rates and reallocates recourses from productive to distributive activities. The effects of corruption in judiciary to economic inequality are not significant, particularly not comparing with the already identified effects to the economic efficiency.

Maximum power point tracking

International Nuclear Information System (INIS)

Enslin, J.H.R.

1990-01-01

A well engineered renewable remote energy system, utilizing the principal of Maximum Power Point Tracking can be m ore cost effective, has a higher reliability and can improve the quality of life in remote areas. This paper reports that a high-efficient power electronic converter, for converting the output voltage of a solar panel, or wind generator, to the required DC battery bus voltage has been realized. The converter is controlled to track the maximum power point of the input source under varying input and output parameters. Maximum power point tracking for relative small systems is achieved by maximization of the output current in a battery charging regulator, using an optimized hill-climbing, inexpensive microprocessor based algorithm. Through practical field measurements it is shown that a minimum input source saving of 15% on 3-5 kWh/day systems can easily be achieved. A total cost saving of at least 10-15% on the capital cost of these systems are achievable for relative small rating Remote Area Power Supply systems. The advantages at larger temperature variations and larger power rated systems are much higher. Other advantages include optimal sizing and system monitor and control

Direct maximum parsimony phylogeny reconstruction from genotype data

OpenAIRE

Sridhar, Srinath; Lam, Fumei; Blelloch, Guy E; Ravi, R; Schwartz, Russell

2007-01-01

Abstract Background Maximum parsimony phylogenetic tree reconstruction from genetic variation data is a fundamental problem in computational genetics with many practical applications in population genetics, whole genome analysis, and the search for genetic predictors of disease. Efficient methods are available for reconstruction of maximum parsimony trees from haplotype data, but such data are difficult to determine directly for autosomal DNA. Data more commonly is available in the form of ge...

Efficiency, sustainability and global warming

International Nuclear Information System (INIS)

Woodward, Richard T.; Bishop, Richard C.

1995-01-01

Economic analyses of global warming have typically been grounded in the theory of economic efficiency. Such analyses may be inappropriate because many of the underlying concerns about climate change are rooted not in efficiency, but in the intergenerational allocation of economic endowments. A simple economic model is developed which demonstrates that an efficient economy is not necessarily a sustainable economy. This result leads directly to questions about the policy relevance of several economic studies of the issue. We then consider policy alternatives to address global warming in the context of economies with the dual objectives of efficiency and sustainability, with particular attention to carbon-based taxes

On the economic analysis of problems in energy efficiency: Market barriers, market failures, and policy implications

International Nuclear Information System (INIS)

Sanstad, A.H.; Koomey, J.G.; Levine, M.D.

1993-01-01

In his recent paper in The Energy Journal, Ronald Sutherland argues that several so-called ''market barriers'' to energy efficiency frequently cited in the literature are not market failures in the conventional sense and are thus irrelevant for energy policy. We argue that Sutherland has inadequately analyzed the idea of market barrier and misrepresented the policy implications of microeconomics. We find that economic theory, correctly interpreted, does not provide for the categorical dismissal of market barriers. We explore important methodological issues underlying the debate over market barriers, and discuss the importance of reconciling the findings of non-economic social sciences with the economic analysis of energy demand and consumer decision-making. We also scrutinize Sutherland's attempt to apply finance theory to rationalize high implicit discount rates observed in energy-related choices, and find this use of finance theory to be inappropriate

On the economic analysis of problems in energy efficiency: Market barriers, market failures, and policy implications

Energy Technology Data Exchange (ETDEWEB)

Sanstad, A.H.; Koomey, J.G.; Levine, M.D.

1993-01-01

In his recent paper in The Energy Journal, Ronald Sutherland argues that several so-called ``market barriers`` to energy efficiency frequently cited in the literature are not market failures in the conventional sense and are thus irrelevant for energy policy. We argue that Sutherland has inadequately analyzed the idea of market barrier and misrepresented the policy implications of microeconomics. We find that economic theory, correctly interpreted, does not provide for the categorical dismissal of market barriers. We explore important methodological issues underlying the debate over market barriers, and discuss the importance of reconciling the findings of non-economic social sciences with the economic analysis of energy demand and consumer decision-making. We also scrutinize Sutherland`s attempt to apply finance theory to rationalize high implicit discount rates observed in energy-related choices, and find this use of finance theory to be inappropriate.

Dividing wall column: Improving thermal efficiency, energy savings and economic performance

International Nuclear Information System (INIS)

Aurangzeb, Md; Jana, Amiya K.

2016-01-01

Highlights: • A rigorous model is developed for a dividing wall column. • Heat transfer model for metal wall is proposed. • Performance improvement is quantified for a ternary system. • Thermal efficiency, energy savings and cost are three used indices. - Abstract: This work aims at investigating the performance improvement of a dividing wall column (DWC) for the separation of a ternary system. It is true that for fractionating a ternary mixture, at least a sequence of two conventional distillation columns is required. To improve energetic and economic potential, and reduce space requirement, two columns are proposed to merge into one shell with a dividing wall. For developing the mathematical model of a distillation column, we consider the effect of heat transfer through the metal wall placed at an intermediated position inside the cylindrical column. The simulated DWC model is verified using the Aspen Plus flowsheet simulator with a wide variety of phase equilibrium models. The superiority of this proposed heat integrated configuration is shown for a ternary hydrocarbon system over a conventional distillation sequence (CDS) in terms of mainly three performance indexes, namely thermal efficiency, energy savings and total annual cost (TAC). It is investigated that the dividing wall distillation scheme can secure a 37.5% energy efficiency, and a 22.6% savings in energy consumption and 23.23% in TAC. The promising performance can also be quantified in terms of a reasonably low payback period of 2.11 years.

Hygienic efficiency of radioisotope instruments application in motor-car industry

International Nuclear Information System (INIS)

Tolokonnikov, M.I.; Lev, M.Ya.; Liberman, A.N.; Chictov, E.D.

1978-01-01

At the Moscow Automobile Works named after I.A. Likhachev, an analysis was made of the hygienic and technologic-economic benefits from use of radioisotope instruments. Radioisotopic sources of radiation are used for research and measuring purposes in various automatic control and monitoring systems, and in evaluating the effectiveness of cleaning facilities. The application of radioisotopic instruments contributes to achieving the maximum possible efficiency of the equipment, to the improvement of working conditions, and to the prevention of environmental pollution

EVALUATION OF ECONOMIC EFFICIENCY PERTAINING TO USAGE OF AUTOMOTIVE TRANSPORT FACILITIES WHILE EXECUTING INTERNATIONAL CARGO TRANSPORTATION

Directory of Open Access Journals (Sweden)

R. B. Ivut

2010-01-01

Full Text Available The paper presents a methodology for evaluation of economic efficiency pertaining to usage of automotive transport facilities while executing international cargo transportation on the basis of average internal norm calculation of automotive operational profitability of a specific model under conditions which are typical for the given market by an average carrier.

OPTICAL FIBER SENSOR TECHNOLOGIES FOR EFFICIENT AND ECONOMICAL OIL RECOVERY

Energy Technology Data Exchange (ETDEWEB)

A. Wang; H. Xiao; R. May

1999-10-29

Efficient and complete recovery of petroleum reserves from existing oil wells has proven difficult due to a lack of robust instrumentation that can monitor processes in the downhole environment. Commercially available sensors for measurement of pressure, temperature, and fluid flow exhibit shortened lifetimes in the harsh downhole conditions, which are characterized by high pressures (up to 20 kpsi), temperatures up to 250 C, and exposure to chemically reactive fluids. Development of robust sensors that deliver continuous, real-time data on reservoir performance and petroleum flow pathways will facilitate application of advanced recovery technologies, including horizontal and multi-lateral wells. The main objective of the research program is to develop cost-effective, reliable fiber sensor instrumentation for real-time monitoring and /or control of various key parameters crucial to efficient and economical oil production. This report presents the detailed research work and technical progress from October 1, 1998 to September 30, 1999. The research performed over the first year of the program has followed the schedule as proposed, and solid research progress has been made in specification of the technical requirements, design and fabrication of the SCIIB sensor probes, development of the sensor systems, development of DSP-based signal processing techniques, and construction of the test systems. These technical achievements will significantly help to advance continued research on sensor tests and evaluation during the second year of the program.

Technical and economic assessment of design efficiency of information and measuring systems

Science.gov (United States)

Yurov, V. M.; Eremin, E. N.; Baisagov, Ya Zh; Arkhipov, V. V.

2018-01-01

A thermodynamic approach to the analysis of information-measuring systems (IMS) is developed in the work. Expressions for efficiency of IMS are obtained. The connection between the amount of processor memory and the amount of incoming information and the accuracy of the IMS is obtained. It is shown that the probability of information loss in IMS decreases with the increase in the amount of information from the object. Using the analogy method, economic aspects of IMS design are considered. The innate ability of IMS and Moore’s law are considered. The proposed approach and the resulting formulas will be useful in the design of new IMS.

Economically compatible climate protection for Germany as a major site of industry

International Nuclear Information System (INIS)

Fahl, U.; Laege, E.; Schaumann, P.; Voss, A.

1996-01-01

National climate protection policy must be designed in such a way as to ensure its compatibility with the economy and full employment. In this context, cost-efficient measures for reducing greenhouse gas emissions which achieve a maximum cut in greenhouse gases for each Mark that is spent are of paramount importance. Climate protection, the strengthening of Germany as a major site of industry and a sphere of life, sustainable development and the safeguarding of power supply are all one. Political and economic action must have this fact in mind. This is the background against which the possibilities for economically compatible and climate-friendly reduction of energy-related greenhouse gas emissions in Germany are discussed. (orig.) [de

Economic Efficiency of Artisanal Fishing Households under Oil Pollution Environment in the Niger Delta Region of Nigeria

Directory of Open Access Journals (Sweden)

Gbigbi, TM.

2014-01-01

Full Text Available Fish supplies more than 87% of the animal protein in Nigeria, and more than 90% of coastal communities depend solely on fishing and fisheries related activities for their survival. Available information however, shows that Nigeria's inland water bodies are producing less than 13% of their estimated fishery potential. And domestic demand for fish has never been met by dependence on output from available aquatic sources. Nigeria therefore imports over US$ 200 million worth of frozen fish per annum. The capacity of artisanal fisheries to play its role of bridging this food gap, providing employment and generating income, particularly for the coastal communities in Nigeria, will largely depend on the adoption of appropriate management strategies that will ensure efficiency and sustainability given their debilitating oil pollution environment. This study employed a Cobb- Douglas stochastic frontier cost function to measure the level of economic efficiency and its determinants among these households. A multi-stage random sampling technique was used to select 160 respondents from whom input-output data, prices and socioeconomic characteristics were obtained. The results of the analysis showed that individual levels of economic efficiency ranged from 0.10 - 0.96 with a mean of 0.68. While age, household size and number of fishing trips made in a week decreased, access to credit, membership of co-operative society, and oil spill increased, significantly, the respondents' level of economic inefficiency. These observations particularly suggest that the farmers were yet to harness the potentials of farm credit and membership of cooperative societies in their farm business, perhaps as a result of poverty. We recommend training workshops and seminars to remedy this. There is also the need for policies that could compel oil companies to minimize oil spill within the farmers' fishing environment. The adverse effects of oil spill on the environment and the

Thermodynamic and economic studies of two new high efficient power-cooling cogeneration systems based on Kalina and absorption refrigeration cycles

International Nuclear Information System (INIS)

Rashidi, Jouan; Ifaei, Pouya; Esfahani, Iman Janghorban; Ataei, Abtin; Yoo, Chang Kyoo

2016-01-01

Highlights: • Proposing two new power and cooling cogeneration systems based on absorption chillers and Kalina cycles. • Model-based comparison through thermodynamic and economic standpoints. • Investigating sensitivity of system performance and costs to the key parameters. • Reducing total annual costs of the base system up to 8% by cogeneration. • Increasing thermal efficiency up to 4.9% despite of cooling generation. - Abstract: Two new power and cooling cogeneration systems based on Kalina cycle (KC) and absorption refrigeration cycle (AC) are proposed and studied from thermodynamic and economic viewpoints. The first proposed system, Kalina power-cooling cycle (KPCC), combines the refrigerant loop of the water-ammonia absorption chiller, consisting of an evaporator and two throttling valves with the KC. A portion of the KC mass flow enters the evaporator to generate cooling after being condensed in the KPCC system. KPCC is a flexible system adapting power and cooling cogeneration to the demand. The second proposed system, Kalina lithium bromide absorption chiller cycle (KLACC), consists of the KC and a single effect lithium bromide-water absorption chiller (AC_L_i_B_r_-_w_a_t_e_r). The KC subsystem discharges heat to the AC_L_i_B_r_-_w_a_t_e_r desorber before condensing in the condenser. The performance and economic aspects of both proposed systems are analyzed and compared with the stand alone KC. A parametric analysis is conducted to evaluate the sensitivity of efficiencies and the generated power and cooling quantities to the key operating variables. The results showed that, thermal efficiency and total annual costs decreased by 5.6% and 8% for KPCC system but increased 4.9% and 58% for KLACC system, respectively. Since the power-cooling efficiency of KLACC is 42% higher than KPCC it can be applied where the aim is cooling generation without considering economic aspects.

METHOD OF DETERMINING ECONOMICAL EFFICIENCY OF HOUSING STOCK RECONSTRUCTION IN A CITY

Directory of Open Access Journals (Sweden)

Petreneva Ol’ga Vladimirovna

2016-03-01

Full Text Available RECONSTRUCTION IN A CITY The demand in comfortable housing has always been very high. The building density is not the same in different regions and sometimes there is no land for new housing construction, especially in the central regions of cities. Moreover, in many cities cultural and historical centers remain, which create the historical appearance of the city, that’s why new construction is impossible in these regions. Though taking into account the depreciation and obsolescence, the operation life of many buildings come to an end, they fall into disrepair. In these cases there arises a question on the reconstruction of the existing residential, public and industrial buildings. The aim of the reconstruction is bringing the existing worn-out building stock into correspondence with technical, social and sanitary requirements and living standards and conditions. The authors consider the currency and reasons for reconstruction of residential buildings. They attempt to answer the question, what is more economical efficient: new construction or reconstruction of residential buildings. The article offers a method to calculate the efficiency of residential buildings reconstruction.

On the economic analysis of problems in energy efficiency: Market barriers, market failures, and policy implications

Energy Technology Data Exchange (ETDEWEB)

Sanstad, A.H.; Koomey, J.G.; Levine, M.D.

1993-01-01

In his recent paper in The Energy Journal, Ronald Sutherland argues that several so-called market barriers'' to energy efficiency frequently cited in the literature are not market failures in the conventional sense and are thus irrelevant for energy policy. We argue that Sutherland has inadequately analyzed the idea of market barrier and misrepresented the policy implications of microeconomics. We find that economic theory, correctly interpreted, does not provide for the categorical dismissal of market barriers. We explore important methodological issues underlying the debate over market barriers, and discuss the importance of reconciling the findings of non-economic social sciences with the economic analysis of energy demand and consumer decision-making. We also scrutinize Sutherland's attempt to apply finance theory to rationalize high implicit discount rates observed in energy-related choices, and find this use of finance theory to be inappropriate.

Maximum non-extensive entropy block bootstrap for non-stationary processes

Czech Academy of Sciences Publication Activity Database

Bergamelli, M.; Novotný, Jan; Urga, G.

2015-01-01

Roč. 91, 1/2 (2015), s. 115-139 ISSN 0001-771X R&D Projects: GA ČR(CZ) GA14-27047S Institutional support: RVO:67985998 Keywords : maximum entropy * bootstrap * Monte Carlo simulations Subject RIV: AH - Economics

IMPROVED METHOD OF DETERMINATION OF ECONOMIC EFFICIENCY OF CONSTRUCTION AND OPERATION OF HIGH SPEED MAINLINE IN UKRAINE

Directory of Open Access Journals (Sweden)

YU. S. Barash

2014-01-01

Full Text Available Purpose. To develop an advanced methodology and formulate the measures concerning the definition of economic efficiency of high-speed movement organization taking into account the operating experience of rapid transportations in Ukraine, travel time, number of stops on the route, schedule and the demand for these transportations. Methodology. The economic feasibility for appropriateness of high-speed movement organization in Ukraine is an investment project, which involves step-by-step money investment to the construction. To solve such problems one uses net present value, which UZ or newly created companies can get during the project realization and after its completion. Findings. On the basis of obtained studies one can state that the methodology of complex determination of construction efficiency and high-speed passenger trains operation taking into account the cost of infrastructure, rolling stock, impact of environmental factors, etc. was developed in the article. Originality. We propose a scientific approach to determine the economic efficiency of the construction and high-speed main lines operation. This approach, unlike the existing one, includes the improved principles of determining the passenger traffic, the cost of high-speed mainline construction, the number of rolling stock; optimizes income and expenditure calculations in the context of competitive advantages and impact of the external factors on the company. For the first time it was taken into account the transit flow of passengers departing from CIS countries to the vacation in the Crimea, the Carpathians, Odessa and Lviv regions. The account of these factors increases the feasibility of administrative decisions concerning ensuring the efficiency of high-speed traffic functioning. Practical value. The proposed methodology and the research results allowed determining the construction reasonability of high-speed mainline for the passenger trains with a speed at least250 km/h in

efficience technico-economique

African Journals Online (AJOL)

USER

ABSTRACT. TECHNICO-ECONOMIC EFFICIENCY : CASE OF THE PRODUCERS OF ONION AND POTATO IN KNOW IN MOROCCO. In the new context ... Key words : Technico-economic efficiency, stochastic frontier, potato production, onion production, Morocco ..... sont le labour, le cover-cropage et le traçage. 82 % des ...

A performance analysis for MHD power cycles operating at maximum power density

International Nuclear Information System (INIS)

Sahin, Bahri; Kodal, Ali; Yavuz, Hasbi

1996-01-01

An analysis of the thermal efficiency of a magnetohydrodynamic (MHD) power cycle at maximum power density for a constant velocity type MHD generator has been carried out. The irreversibilities at the compressor and the MHD generator are taken into account. The results obtained from power density analysis were compared with those of maximum power analysis. It is shown that by using the power density criteria the MHD cycle efficiency can be increased effectively. (author)

EVALUATION OF ECONOMIC EFFICIENCY OF INVESTMENT IN THE INDUSTRIAL LOGISTICS PARK OF THE NOVOSIBIRSK REGION

Directory of Open Access Journals (Sweden)

Kogan A. B.

2016-03-01

Full Text Available The author describes a method for estimation the economic efficiency, based on the input-output model. The proposed method develops the author of well-known methods of cost-benefits analysis. The method is used to assess the effectiveness of budget financing the establishment of Industrial logistics Park (PLP in the Novosibirsk region (NSO. The estimation is based on the input-output model developed for the NSO. Economic benefits are assessed on the basis of growth in gross value added (GVA. This takes into account a number of losses GVA, for example, losses due to the displacement of existing producers, losses due to the purchase of imported resources, etc. Economiccosts is estimated as a fulloutput of the economy, necessary for the establishment and operation of the investment project.

Higher renewable energy integration into the existing energy system of Finland – Is there any maximum limit?

International Nuclear Information System (INIS)

Zakeri, Behnam; Syri, Sanna; Rinne, Samuli

2015-01-01

Finland is to increase the share of RES (renewable energy sources) up to 38% in final energy consumption by 2020. While benefiting from local biomass resources Finnish energy system is deemed to achieve this goal, increasing the share of other intermittent renewables is under development, namely wind power and solar energy. Yet the maximum flexibility of the existing energy system in integration of renewable energy is not investigated, which is an important step before undertaking new renewable energy obligations. This study aims at filling this gap by hourly analysis and comprehensive modeling of the energy system including electricity, heat, and transportation, by employing EnergyPLAN tool. Focusing on technical and economic implications, we assess the maximum potential of different RESs separately (including bioenergy, hydropower, wind power, solar heating and PV, and heat pumps), as well as an optimal mix of different technologies. Furthermore, we propose a new index for assessing the maximum flexibility of energy systems in absorbing variable renewable energy. The results demonstrate that wind energy can be harvested at maximum levels of 18–19% of annual power demand (approx. 16 TWh/a), without major enhancements in the flexibility of energy infrastructure. With today's energy demand, the maximum feasible renewable energy for Finland is around 44–50% by an optimal mix of different technologies, which promises 35% reduction in carbon emissions from 2012's level. Moreover, Finnish energy system is flexible to augment the share of renewables in gross electricity consumption up to 69–72%, at maximum. Higher shares of RES calls for lower energy consumption (energy efficiency) and more flexibility in balancing energy supply and consumption (e.g. by energy storage). - Highlights: • By hourly analysis, we model the whole energy system of Finland. • With existing energy infrastructure, RES (renewable energy sources) in primary energy cannot go beyond 50%. �

[Introductory concepts of health economics and the social impact of alcohol abuse].

Science.gov (United States)

Moraes, Edilaine; Campos, Geraldo M; Figlie, Neliana B; Laranjeira, Ronaldo R; Ferraz, Marcos B

2006-12-01

Brazilian society bears high economic costs in view of the problems resulting from the alcohol consumption. There is a lack of economic studies into alcohol misuse or dependence in Brazil due to the limited financial resources, despite the huge health problems the country has been facing. This paper aims to introduce basic concepts of Heath Economics to health care practitioners, such as: Complete and Incomplete Economic Evaluation, Disease Costs, Cost Comparison, Types of Evaluation (cost-minimisation, cost-effectiveness, cost-utility, and cost-benefice), Point of View Analysis (from patient, health institution, Ministry of Health, or society), Types of Costs (direct, indirect and intangible), and other ones. In addition, research data on the impact of the alcohol consumption on the Brazilian society is described. We do not intend to exhaust the subjects addressed in this paper, but emphasise the need for more national researches that link the economic evaluation to the alcohol addiction issue in order to seek maximum efficiency by maximising the health care and minimising the scarce health system resources.

A manual for the economic evaluation of energy efficiency and renewable energy technologies

Energy Technology Data Exchange (ETDEWEB)

Short, W.; Packey, D.J.; Holt, T.

1995-03-01

This manual is a guide for analyzing the economics of energy efficiency and renewable energy (EE) technologies and projects. It is intended (1) to help analysts determine the appropriate approach or type of analysis and the appropriate level of detail and (2) to assist EE analysts in completing consistent analyses using standard assumptions and bases, when appropriate. Included are analytical techniques that are commonly required for the economic analysis of EE technologies and projects. The manual consists of six sections: Introduction, Fundamentals, Selection Criteria Guide, Economic Measures, Special Considerations for Conservation and Renewable Energy Systems, and References. A glossary and eight appendices are also included. Each section has a brief introductory statement, a presentation of necessary formulae, a discussion, and when appropriate, examples and descriptions of data and data availability. The objective of an economic analysis is to provide the information needed to make a judgment or a decision. The most complete analysis of an investment in a technology or a project requires the analysis of each year of the life of the investment, taking into account relevant direct costs, indirect and overhead costs, taxes, and returns on investment, plus any externalities, such as environmental impacts, that are relevant to the decision to be made. However, it is important to consider the purpose and scope of a particular analysis at the outset because this will prescribe the course to follow. The perspective of the analysis is important, often dictating the approach to be used. Also, the ultimate use of the results of an analysis will influence the level of detail undertaken. The decision-making criteria of the potential investor must also be considered.

How technological potentials are undermined by economic and behavioural responses. The treatment effect of endogenous energy efficiency measures

International Nuclear Information System (INIS)

Meier, Helena; Tode, Christian; Koeln Univ.

2015-01-01

Governments worldwide spend increasing amounts of money on policy schemes to reduce energy consumption and related carbon emissions. We investigate the actual treatment effect of energy efficiency measures and therein compare actual demand responses to technological potentials. Based on a demand system analysis of household data and by approximating unobserved energy awareness, we find economic and behavioural responses that counteract expected savings from energy efficiency. Results show strong rebound and even back ring effects but also suggest heterogeneity of the effectiveness driven by behavioural concepts, such as sunk cost fallacy or habit formation. Understanding these can contribute to target-oriented policy designs and increased effectiveness and efficiency of policies.

How technological potentials are undermined by economic and behavioural responses. The treatment effect of endogenous energy efficiency measures

Energy Technology Data Exchange (ETDEWEB)

Meier, Helena; Tode, Christian [Koeln Univ. (Germany). Energiewirtschaftliches Inst.; Koeln Univ. (Germany). Dept. of Economics

2015-06-15

Governments worldwide spend increasing amounts of money on policy schemes to reduce energy consumption and related carbon emissions. We investigate the actual treatment effect of energy efficiency measures and therein compare actual demand responses to technological potentials. Based on a demand system analysis of household data and by approximating unobserved energy awareness, we find economic and behavioural responses that counteract expected savings from energy efficiency. Results show strong rebound and even back ring effects but also suggest heterogeneity of the effectiveness driven by behavioural concepts, such as sunk cost fallacy or habit formation. Understanding these can contribute to target-oriented policy designs and increased effectiveness and efficiency of policies.

CO2 taxes as economic tool for energy efficiency analysis of CO2 tax impact on energy efficiency projects in Latvia

International Nuclear Information System (INIS)

Blumberga, D.; Blumberga, M.; Veidenbergs, I.

2005-01-01

The intended purpose of the carbon tax is to reduce CO 2 emissions. This tax can play a significant role in the implementation of energy saving projects. The paper evaluates three market mechanisms for reducing greenhouse gas emissions: joint implementation, emissions trading and CO 2 taxes. The first market mechanism - pilot phase of joint implementation (Activities Implemented Jointly) opened the minds of specialists to the GHG emission reduction potential of energy efficiency projects. The second mechanism was implemented after Latvia had accepted the National Allocation Plan to start emission trading. The third mechanism is based on the introduction of a carbon tax, which will come into force in Latvia in July 2005. This paper describes the potential impact of this tax that could promote development of energy efficiency projects. The authors worked out an evaluation methodology to calculate the impact of CO 2 taxes on emissions levels and the potential value of such taxes. The proposed methodology is applicable to district heating companies and governmental institutions, defining links between the energy efficiency and CO 2 taxes and showing ways of justifying these taxes both economically and environmentally. (authors)

The economic value of corporate eco-efficiency

NARCIS (Netherlands)

Guenster, N.; Bauer, R.; Derwall, J.M.M.; Koedijk, C.G.

2011-01-01

This study adds new insights to the long-running corporate environmental-financial performance debate by focusing on the concept of eco-efficiency. Using a new database of eco-efficiency scores, we analyse the relation between eco-efficiency and financial performance from 1997 to 2004. We report

Fast breeder reactor expected to soon overtake LWRs in terms of economic efficiency

International Nuclear Information System (INIS)

Eitz, A.W.; Theisen, G.; Wolff, U.; Riethmueller, R.

1986-01-01

On the basis of current knowledge, the authors try to comparatively assess the fuel cycle costs of the SNR and the LWR, and to establish a prognosis of the competibility of the SNR in terms of fuel expenditure. The result is that already today, the fast breeder would achieve the economic efficiency of the LWR-type reactor, and in future would offer clear advantages. For their assessments, the authors made a few cost estimates, as e.g. with regard to the fuel reprocessing plant, which deserve close attention, and power discussion. As to the next project to follow, a large-scale European fast breeder reactor power plant, the authors state that the fuel cycle cost will not present a special economic risk, if an option for interim fuel storage is ensured. Determination of the right and adequate time to start construction of a commercial fuel reprocessing plant is no point in current discussions, and should anyhow be made with great care and the least time pressure possible. Cooperation among European states, however, is indispensable for this project. (orig.) [de

Methods of assessing functioning of organizational and economic mechanism during innovation process implementation

Directory of Open Access Journals (Sweden)

Blinkov Maksim

2017-01-01

Full Text Available This paper proposes methods of assessing the efficiency of organizational and economic mechanism of an industrial enterprise when implementing innovation processes. These methods allow continuous monitoring at all stages of innovation process implementation, lead to reduction in costs of innovation activity and enable maximum use of the creative potential of enterprise personnel. The significance and attractiveness of this method is ensured by the fact that it can be applied by industrial companies in any market fields regardless of the lifecycle stage applicable to the studied goods, company and/or innovative process because the composition and the number of specific indicators can be adjusted by the work group both before the study and in the course of the company’s innovative activities (at any stage of their implementation. The multi-sided approach proposed for assessing the efficiency of organizational and economic mechanism of the industrial enterprise when implementing innovation processes ensures full and accurate assessment of the impact of certain factors on the final result.

Efficient ecologic and economic operational rules for dammed systems by means of nondominated sorting genetic algorithm II

Science.gov (United States)

Niayifar, A.; Perona, P.

2015-12-01

River impoundment by dams is known to strongly affect the natural flow regime and in turn the river attributes and the related ecosystem biodiversity. Making hydropower sustainable implies to seek for innovative operational policies able to generate dynamic environmental flows while maintaining economic efficiency. For dammed systems, we build the ecological and economical efficiency plot for non-proportional flow redistribution operational rules compared to minimal flow operational. As for the case of small hydropower plants (e.g., see the companion paper by Gorla et al., this session), we use a four parameters Fermi-Dirac statistical distribution to mathematically formulate non-proportional redistribution rules. These rules allocate a fraction of water to the riverine environment depending on current reservoir inflows and storage. Riverine ecological benefits associated to dynamic environmental flows are computed by integrating the Weighted Usable Area (WUA) for fishes with Richter's hydrological indicators. Then, we apply nondominated sorting genetic algorithm II (NSGA-II) to an ensemble of non-proportional and minimal flow redistribution rules in order to generate the Pareto frontier showing the system performances in the ecologic and economic space. This fast and elitist multiobjective optimization method is eventually applied to a case study. It is found that non-proportional dynamic flow releases ensure maximal power production on the one hand, while conciliating ecological sustainability on the other hand. Much of the improvement in the environmental indicator is seen to arise from a better use of the reservoir storage dynamics, which allows to capture, and laminate flood events while recovering part of them for energy production. In conclusion, adopting such new operational policies would unravel a spectrum of globally-efficient performances of the dammed system when compared with those resulting from policies based on constant minimum flow releases.

An eco-efficient and economical optimum evaluation technique for the forest road networks: the case of the mountainous forest of Metsovo, Greece.

Science.gov (United States)

Tampekis, Stergios; Samara, Fani; Sakellariou, Stavros; Sfougaris, Athanassios; Christopoulou, Olga

2018-02-12

The sustainable forest management can be achieved only through environmentally sound and economically efficient and feasible forest road networks and transportation systems that can potentially improve the multi-functional use of forest resources. However, road network planning and construction suggest long-term finance that require a capital investment (cash outflow), which would be equal to the value of the total revenue flow (cash inflow) over the whole lifecycle project. This paper emphasizes in an eco-efficient and economical optimum evaluation method for the forest road networks in the mountainous forest of Metsovo, Greece. More specifically, with the use of this technique, we evaluated the forest roads' (a) total construction costs, (b) annual maintenance cost, and (c) log skidding cost. In addition, we estimated the total economic value of forest goods and services that are lost from the forest roads' construction. Finally, we assessed the optimum eco-efficient and economical forest roads densities based on linear equations that stem from the internal rate of return method (IRR) and have been presented graphically. Data analysis and its presentation are achieved with the contribution of geographic information systems (GIS). The technique which is described in this study can be for the decision makers an attractive and useful implement in order to select the most eco-friendly and economical optimum solution to plan forest road network or to evaluate the existing forest transportation systems. Hence, with the use of this method, we can combine not only the multi-objective utilization of natural resources but also the environmental protection of forest ecosystems.

The economic production of alcohol fuels from coal-derived synthesis gas

Energy Technology Data Exchange (ETDEWEB)

Kugler, E.L.; Dadyburjor, D.B.; Yang, R.Y.K. [West Virginia Univ., Morgantown, WV (United States)] [and others

1995-12-31

The objectives of this project are to discover, (1) study and evaluate novel heterogeneous catalytic systems for the production of oxygenated fuel enhancers from synthesis gas. Specifically, alternative methods of preparing catalysts are to be investigated, and novel catalysts, including sulfur-tolerant ones, are to be pursued. (Task 1); (2) explore, analytically and on the bench scale, novel reactor and process concepts for use in converting syngas to liquid fuel products. (Task 1); (3) simulate by computer the most energy efficient and economically efficient process for converting coal to energy, with primary focus on converting syngas to fuel alcohols. (Task 2); (4) develop on the bench scale the best holistic combination of chemistry, catalyst, reactor and total process configuration integrated with the overall coal conversion process to achieve economic optimization for the conversion of syngas to liquid products within the framework of achieving the maximum cost effective transformation of coal to energy equivalents. (Tasks 1 and 2); and (5) evaluate the combustion, emission and performance characteristics of fuel alcohols and blends of alcohols with petroleum-based fuels. (Task 2)

Strategies for carbon dioxide emissions reductions: Residential natural gas efficiency, economic, and ancillary health impacts in Maryland

International Nuclear Information System (INIS)

Ruth, Matthias; Blohm, Andrew; Mauer, Joanna; Gabriel, Steven A.; Kesana, Vijay G.; Chen Yihsu; Hobbs, Benjamin F.; Irani, Daraius

2010-01-01

As part of its commitments to the Regional Greenhouse Gas Initiative (RGGI), the State of Maryland, USA, auctions emission permits to electric utilities, creating revenue that can be used to benefit consumers and the environment. This paper explores the CO 2 emissions reductions that may be possible by allocating some of that revenue to foster efficiency improvements in the residential sector's use of natural gas. Since these improvements will require changes to the capital stock of houses and end use equipment, efficiency improvements may be accompanied by economic and ancillary health impacts, both of which are quantified in this paper.

Technical efficiency of economic systems of EU-15 countries based on energy consumption

International Nuclear Information System (INIS)

Bampatsou, Christina; Papadopoulos, Savas; Zervas, Efthimios

2013-01-01

In the present study, Data Envelopment Analysis is used to determine the Technical Efficiency index of EU-15 countries from 1980 to 2008, using cross-country comparison. Technical Efficiency index represents the capacity of an economy to produce a higher level of Gross Domestic Product for a given level of total energy input. The level of the Technical Efficiency index is determined from the energy mix (fossil fuels, non-fossil fuels, nuclear energy) of each country and depends on the maximization level of the production of the Gross Domestic Product of the economic system, without waste of energy resources. The current study is applied in the case of the EU15 countries. Its scope is to highlight the differentiations of country classifications before and after the integration of nuclear energy in the energy mix of each country. The main result is that the integration of nuclear energy as an additional input in the energy mixture affects negatively the Technical Efficiency of countries. Also, when an economy achieves a decrease of the energy consumption produced from fossil fuels, and a better exploitation of renewable energy sources, clearly improves its capacity to produce more output with the given levels of inputs. - Highlights: ► Technical efficiency index of EU-15 countries is determined through the DEA method. ► Level of the TE index is determined from the energy mix used in each country. ► TE level depends on the maximization level of GDP without waste of energy resources. ► Capacity of an economy to produce more GDP for a given energy input is determined. ► TE differentiation before and after the integration of nuclear energy is performed

Efficient stocks administration in the frame of the present economic crisis

Directory of Open Access Journals (Sweden)

Mihai Deju

2010-12-01

Full Text Available The economic-financial crisis made its presence felt through more or less shy signals. All companies from the international and national market started to feel the crisis’s negative effects, several declaring bankruptcy, or diminishing temporary their activity. The consequences are multiples: the unemployment’s rate increase, the decreasing of the purchase power and reducing the goods demand from the luxury ones up to the one for consumption etc. Under these circumstances, companies have to avoid the immobilization of financial resources in products stocks that cannot be sold in the near future period, because otherwise would attract the danger of costs increasing, cashing decrease and generation of loses that may endanger the companies capacity of surpassing the present crisis. Therefore, all companies, no matter their size, should find during this period means of efficient stocks administration.

Economic and Environmental Assessment of a 1 MW Grid Connected Rooftop Solar PV System for Energy Efficient Building in Bangladesh

Science.gov (United States)

Chakraborty, Sanjib; Hosain, Rubayet; Rahman, Toufiqur; Rabbi, Ahmead Fazle

This paper evaluates the potentiality of a 1 MW grid connected rooftop solar PV system for an Energy Efficient Building in Bangladesh, which was estimated by utilizing NASA SSE solar radiation data, PVsyst simulation software and RETScreen simulation software. Economic and environmental viability for a ten-storied building with roof area of 6,500 m2 in the Capital City of Bangladesh, Dhaka was assessed by using the RETScreen simulation software. The yearly electricity production of the proposed system was 1,581 MWh estimated by PVsyst where the technical prospective of gird-connected solar PV in Bangladesh was calculated as about 50,174 MW. The economic assessments were determined the simple payback in such a way that the generated electricity first fulfills the demand of the building, and then the rest of the energy is supplied to the grid. The result indicates that the roof top solar PV system for an Energy efficient building in Dhaka city has a favorable condition for development both in economic and environmental point of view.

Efficient Levenberg-Marquardt minimization of the maximum likelihood estimator for Poisson deviates

International Nuclear Information System (INIS)

Laurence, T.; Chromy, B.

2010-01-01

Histograms of counted events are Poisson distributed, but are typically fitted without justification using nonlinear least squares fitting. The more appropriate maximum likelihood estimator (MLE) for Poisson distributed data is seldom used. We extend the use of the Levenberg-Marquardt algorithm commonly used for nonlinear least squares minimization for use with the MLE for Poisson distributed data. In so doing, we remove any excuse for not using this more appropriate MLE. We demonstrate the use of the algorithm and the superior performance of the MLE using simulations and experiments in the context of fluorescence lifetime imaging. Scientists commonly form histograms of counted events from their data, and extract parameters by fitting to a specified model. Assuming that the probability of occurrence for each bin is small, event counts in the histogram bins will be distributed according to the Poisson distribution. We develop here an efficient algorithm for fitting event counting histograms using the maximum likelihood estimator (MLE) for Poisson distributed data, rather than the non-linear least squares measure. This algorithm is a simple extension of the common Levenberg-Marquardt (L-M) algorithm, is simple to implement, quick and robust. Fitting using a least squares measure is most common, but it is the maximum likelihood estimator only for Gaussian-distributed data. Non-linear least squares methods may be applied to event counting histograms in cases where the number of events is very large, so that the Poisson distribution is well approximated by a Gaussian. However, it is not easy to satisfy this criterion in practice - which requires a large number of events. It has been well-known for years that least squares procedures lead to biased results when applied to Poisson-distributed data; a recent paper providing extensive characterization of these biases in exponential fitting is given. The more appropriate measure based on the maximum likelihood estimator (MLE

Mobilising Investment in Energy Efficiency

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

Taxes, loans and grants, trading schemes and white certificates, public procurement and investment in R&D or infrastructure: known collectively as 'economic instruments', these tools can be powerful means of mobilising the finances needed to achieve policy goals by implementing energy efficiency measures. The role of economic instruments is to kick-start the private financial markets and to motivate private investors to fund EE measures. They should reinforce and promote energy performance regulations. This IEA analysis addresses the fact that, to date, relatively little effort has been directed toward evaluating how well economic instruments work. Using the buildings sector to illustrate how such measures can support energy efficiency, this paper can help policy makers better select and design economic instruments appropriate to their policy objectives and national contexts. This report’s three main aims are to: 1) Examine how economic instruments are currently used in energy efficiency policy; 2) Consider how economic instruments can be more effective and efficient in supporting low-energy buildings; and 3) Assess how economic instruments should be funded, where public outlay is needed. Detailed case studies in this report assess examples of economic instruments for energy efficiency in the buildings sector in Canada (grants), France (tax relief and loans), Germany (loans and grants), Ireland (grants) and Italy (white certificates and tax relief).

Zipf's law, power laws and maximum entropy

International Nuclear Information System (INIS)

Visser, Matt

2013-01-01

Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines—from astronomy to demographics to software structure to economics to linguistics to zoology, and even warfare. A recent model of random group formation (RGF) attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present paper I argue that the specific cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified. (paper)

The Economic Value of Corporate Eco-Efficiency

International Nuclear Information System (INIS)

Guenster, N.; Derwall, J.; Bauer, R.; Koedijk, K.

2006-08-01

This study adds new insights to the long-running corporate environmental-financial performance debate by focusing on the concept of eco-efficiency. Using a new database of eco-efficiency ratings, we analyze the relation between eco-efficiency and financial performance from 1997 to 2004. We report that eco-efficiency relates positively to operating performance and market value. Moreover, our results suggest that the market's valuation of environmental performance has been time variant, which may indicate that the market incorporates environmental information with a drift. Although environmental leaders initially did not sell at a premium relative to laggards, the valuation differential increased significantly over time. Our results have implications for company managers, who evidently do not have to overcome a tradeoff between eco-efficiency and financial performance, and for investors, who can exploit environmental information for investment decisions

Examining carbon emissions economic growth nexus for India: A multivariate cointegration approach

International Nuclear Information System (INIS)

Ghosh, Sajal

2010-01-01

The study probes cointegration and causality between carbon emissions and economic growth for India using ARDL bounds testing approach complemented by Johansen-Juselius maximum likelihood procedure in a multivariate framework by incorporating energy supply, investment and employment for time span 1971-2006. The study fails to establish long-run equilibrium relationship and long term causality between carbon emissions and economic growth; however, there exists a bi-directional short-run causality between the two. Hence, in the short-run, any effort to reduce carbon emissions could lead to a fall in the national income. This study also establishes unidirectional short-run causality running from economic growth to energy supply and energy supply to carbon emissions. The absence of causality running from energy supply to economic growth implies that in India, energy conservation and energy efficiency measures can be implemented to minimize the wastage of energy across value chain. Such measures would narrow energy demand-supply gap. Absence of long-run causality between carbon emissions and economic growth implies that in the long-run, focus should be given on harnessing energy from clean sources to curb carbon emissions, which would not affect the country's economic growth.

Agroforestry versus farm mosaic systems - Comparing land-use efficiency, economic returns and risks under climate change effects.

Science.gov (United States)

Paul, Carola; Weber, Michael; Knoke, Thomas

2017-06-01

Increasing land-use conflicts call for the development of land-use systems that reconcile agricultural production with the provisioning of multiple ecosystem services, including climate change mitigation. Agroforestry has been suggested as a global solution to increase land-use efficiency, while reducing environmental impacts and economic risks for farmers. Past research has often focused on comparing tree-crop combinations with agricultural monocultures, but agroforestry has seldom been systematically compared to other forms of land-use diversification, including a farm mosaic. This form of diversification mixes separate parcels of different land uses within the farm. The objective of this study was to develop a modelling approach to compare the performance of the agroforestry and farm mosaic diversification strategies, accounting for tree-crop interaction effects and economic and climate uncertainty. For this purpose, Modern Portfolio Theory and risk simulation were coupled with the process-based biophysical simulation model WaNuLCAS 4.0. For an example application, we used data from a field trial in Panama. The results show that the simulated agroforestry systems (Taungya, alley cropping and border planting) could outperform a farm mosaic approach in terms of cumulative production and return. Considering market and climate uncertainty, agroforestry showed an up to 21% higher economic return at the same risk level (i.e. standard deviation of economic returns). Farm compositions with large shares of land allocated to maize cultivation were also more severely affected by an increasing drought frequency in terms of both risks and returns. Our study demonstrates that agroforestry can be an economically efficient diversification strategy, but only if the design allows for economies of scope, beneficial interactions between trees and crops and higher income diversification compared to a farm mosaic. The modelling approach can make an important contribution to support

Implications Of Foreign Direct Investment, Financial Development And Real Exchange Rate For Economic Growth In Cameroon

Directory of Open Access Journals (Sweden)

Victalice Ngimanang Achamoh

2016-05-01

Full Text Available This paper assesses the effects of foreign direct investment (FDI, financial development and real exchange rate (RER on economic growth in Cameroon using Cameroon’s annual time series data spanning the period 1977 - 2010. To address these objectives, residual based Engle-Granger test, the OLS based Autoregressive Distributive Lag (ARDL bound testing and maximum likelihood based Johansen cointegration techniques are employed. Results of Unit roots tests show that all the series possessed unit roots at level or first difference form. The ARDL model and VECM results reveal that the RER has a significant negative effect on economic growth, while FDI and Financial Development relate positively to economic growth. These findings have implications for stimulating economic growth by increasing efficiency of the financial sector in allocating credit to the private sector and preventing real exchange rate appreciation in the shortrun.

Environmental assessment for the Consumer Products Efficiency Standards program

Energy Technology Data Exchange (ETDEWEB)

1980-05-23

The Energy Policy and Conservation Act of 1975 as amended by the National Energy Conservation Policy Act of 1978, requires the DOE to prescribe energy efficiency standards for thirteen consumer products. The Consumer Products Efficiency Standards (CPES) program covers the following products: refrigerators and refrigerator-freezers; freezers;clothes dryers;water heaters; room air conditioners; home heating equipment (not including furnaces); kitchen ranges and ovens; central air conditioners (cooling and heat pumps); furnaces; dishwashers; television sets; clothes washers; and humidifiers and dehumidifiers. DOE is proposing two sets of standards for all thirteen consumer products: intermediate standards to become effective in 1981 for the first nine products and in 1982 for the second four products, and final standards to become effective in 1986 and 1987, respectively. The final standards are more restrictive than the intermediate standards and will provide manufacturers with the maximum time permitted under the Act to plan and develop extensive new lines of efficient consumer products. The final standards proposed by DOE require the maximum improvements in efficiency which are technologically feasible and economically justified, as required by Section 325(c) of EPCA. The thirteen consumer products account for approximately 90% of all the energy consumed in the nation's residences, or more than 20% of the nation's energy needs. Increases in the energy efficiency of these consumer products can help to narrow the gap between the nation's increasing demand for energy and decreasing supplies of domestic oil and natural gas. Improvements in the efficiency of consumer products can thus help to solve the nation's energy crisis.

Accuracy, precision, and economic efficiency for three methods of thrips (Thysanoptera: Thripidae) population density assessment.

Science.gov (United States)

Sutherland, Andrew M; Parrella, Michael P

2011-08-01

Western flower thrips, Frankliniella occidentalis (Pergande) (Thysanoptera: Thripidae), is a major horticultural pest and an important vector of plant viruses in many parts of the world. Methods for assessing thrips population density for pest management decision support are often inaccurate or imprecise due to thrips' positive thigmotaxis, small size, and naturally aggregated populations. Two established methods, flower tapping and an alcohol wash, were compared with a novel method, plant desiccation coupled with passive trapping, using accuracy, precision and economic efficiency as comparative variables. Observed accuracy was statistically similar and low (37.8-53.6%) for all three methods. Flower tapping was the least expensive method, in terms of person-hours, whereas the alcohol wash method was the most expensive. Precision, expressed by relative variation, depended on location within the greenhouse, location on greenhouse benches, and the sampling week, but it was generally highest for the flower tapping and desiccation methods. Economic efficiency, expressed by relative net precision, was highest for the flower tapping method and lowest for the alcohol wash method. Advantages and disadvantages are discussed for all three methods used. If relative density assessment methods such as these can all be assumed to accurately estimate a constant proportion of absolute density, then high precision becomes the methodological goal in terms of measuring insect population density, decision making for pest management, and pesticide efficacy assessments.

Towards a more efficient environmental policy. A socio-economic analysis of four persistent environmental problems

International Nuclear Information System (INIS)

2000-11-01

For the benefit of the National Environmental Policy Plan that will be published in 2001, the Netherlands Bureau for Economic Policy Analysis analysed four persistent environmental problems. These problems are the environmental effects of the manure surplus in the agricultural sector; the climate problem; the acidification by traffic and the air traffic noise around the airport Schiphol. This study not only looks ahead, but also looks back on 30 years of environmental policy. From a welfare economic perspective an analysis is made of the efficiency and effectiveness of that policy. Several questions are answered,e.g.: how could the manure problem of such a small sector as the livestock breeding persist for so many years?; how effective were the agreements with the industry and other sectors on energy efficiency improvement?; what made the acidification policy directed on traffic so successful?; why is the noise production of air traffic still a problem whereas the number of seriously bothered houses is decreased? The answers on these questions provide information which can be useful for the formulation of the future environmental policy. This information refers to the conditions for formulating adequate policy goals, the relation between those goals and policy instruments and the differences between direct versus indirect steering. This report also gives some points of interest for tackling complex international environmental problems. refs

Artificial Neural Network In Maximum Power Point Tracking Algorithm Of Photovoltaic Systems

Directory of Open Access Journals (Sweden)

Modestas Pikutis

2014-05-01

Full Text Available Scientists are looking for ways to improve the efficiency of solar cells all the time. The efficiency of solar cells which are available to the general public is up to 20%. Part of the solar energy is unused and a capacity of solar power plant is significantly reduced – if slow controller or controller which cannot stay at maximum power point of solar modules is used. Various algorithms of maximum power point tracking were created, but mostly algorithms are slow or make mistakes. In the literature more and more oftenartificial neural networks (ANN in maximum power point tracking process are mentioned, in order to improve performance of the controller. Self-learner artificial neural network and IncCond algorithm were used for maximum power point tracking in created solar power plant model. The algorithm for control was created. Solar power plant model is implemented in Matlab/Simulink environment.

Efficiency of Emission Control Measures on Particulate Matter-Related Health Impacts and Economic Cost during the 2014 Asia-Pacific Economic Cooperation Meeting in Beijing

Directory of Open Access Journals (Sweden)

Qichen Liu

2016-12-01

Full Text Available Background: The Asia-Pacific Economic Cooperation (APEC meeting was held from 5 November to 11 November 2014 in Beijing, and comprehensive emission control measures were implemented. The efficiency of these measures on particulate matter-related health impacts and economic cost need to be evaluated. Methods: The influences of emission control measures during APEC on particulate matter were evaluated, and health economic effects were assessed. Results: Average concentrations of PM2.5 and PM10 during APEC were reduced by 57.0%, and 50.6% respectively, compared with pre-APEC period. However, the concentrations of particulate matter rebounded after APEC. Compared with the pre-APEC and post-APEC periods, the estimated number of deaths caused by non-accidental, cardiovascular and respiratory diseases that could be attributed to PM2.5 and PM10 during the APEC were the lowest. The economic cost associated with mortality caused by PM2.5 and PM10 during the APEC were reduced by (61.3% and 66.6% and (50.3% and 60.8% respectively, compared with pre-APEC and post-APEC. Conclusions: The emission control measures were effective in improving short term air quality and reducing health risks and medical expenses during 2014 APEC, but more efforts is needed for long term and continuous air quality improvement and health protection.

Efficiency of Emission Control Measures on Particulate Matter-Related Health Impacts and Economic Cost during the 2014 Asia-Pacific Economic Cooperation Meeting in Beijing.

Science.gov (United States)

Liu, Qichen; Huang, Jing; Guo, Bin; Guo, Xinbiao

2016-12-28

Background : The Asia-Pacific Economic Cooperation (APEC) meeting was held from 5 November to 11 November 2014 in Beijing, and comprehensive emission control measures were implemented. The efficiency of these measures on particulate matter-related health impacts and economic cost need to be evaluated. Methods : The influences of emission control measures during APEC on particulate matter were evaluated, and health economic effects were assessed. Results : Average concentrations of PM 2.5 and PM 10 during APEC were reduced by 57.0%, and 50.6% respectively, compared with pre-APEC period. However, the concentrations of particulate matter rebounded after APEC. Compared with the pre-APEC and post-APEC periods, the estimated number of deaths caused by non-accidental, cardiovascular and respiratory diseases that could be attributed to PM 2.5 and PM 10 during the APEC were the lowest. The economic cost associated with mortality caused by PM 2.5 and PM 10 during the APEC were reduced by (61.3% and 66.6%) and (50.3% and 60.8%) respectively, compared with pre-APEC and post-APEC. Conclusions : The emission control measures were effective in improving short term air quality and reducing health risks and medical expenses during 2014 APEC, but more efforts is needed for long term and continuous air quality improvement and health protection.

Microprocessor-controlled step-down maximum-power-point tracker for photovoltaic systems

Science.gov (United States)

Mazmuder, R. K.; Haidar, S.

1992-12-01

An efficient maximum power point tracker (MPPT) has been developed and can be used with a photovoltaic (PV) array and a load which requires lower voltage than the PV array voltage to be operated. The MPPT makes the PV array to operate at maximum power point (MPP) under all insolation and temperature, which ensures the maximum amount of available PV power to be delivered to the load. The performance of the MPPT has been studied under different insolation levels.

Economic Efficiency of Maize Production in Yola North Local ...

African Journals Online (AJOL)

user

should include the basic nutrients necessary to meet the needs of the ... economic production and home production, often have damaging ..... economic citizens in Nigeria (Ankroyd and. Doughty, 1984). ... Nutritional Guide. University of.

Thermo-economic optimization of an endoreversible four-heat-reservoir absorption-refrigerator

International Nuclear Information System (INIS)

Qin Xiaoyong; Chen Lingen; Sun Fengrui; Wu Chih

2005-01-01

Based on an endoreversible four-heat-reservoir absorption-refrigeration-cycle model, the optimal thermo-economic performance of an absorption-refrigerator is analyzed and optimized assuming a linear (Newtonian) heat-transfer law applies. The optimal relation between the thermo-economic criterion and the coefficient of performance (COP), the maximum thermo-economic criterion, and the COP and specific cooling load for the maximum thermo-economic criterion of the cycle are derived using finite-time thermodynamics. Moreover, the effects of the cycle parameters on the thermo-economic performance of the cycle are studied by numerical examples

Can market oriented economic reforms contribute to energy efficiency improvement? Evidence from China

International Nuclear Information System (INIS)

Fan Ying; Liao Hua; Wei Yiming

2007-01-01

Since China accelerated its market oriented economic reforms at the end of 1992, its energy intensity has declined 3.6% annually over 1993-2005. However, its energy intensity declined 4.2% annually during its first reform period 1979-1992. Therefore, can we conclude that the accelerated marketization since the end of 1992 has made no contribution to its energy efficiency improvement? In order to answer this challenging question, we examine the changes of energy own-price elasticity, as well as the elasticities of substitution between energy and non-energy (capital and labor) in China during the periods of 1979-1992 and 1993-2003. Generally, in transition or developing economies, holding the technology and output level fixed, if the energy own-price elasticity (algebraic value) declines or the substitution elasticity between factors rises, they will contribute to energy efficiency improvement. Our empirical study finds that: (1) during 1979-1992, the energy own-price elasticity is positive (0.285), and capital-energy, labor-energy are both Morishima complementary; which indicates a distorted energy price and inefficient allocation; and (2) during 1993-2003, the own-price elasticity for energy is negative (-1.236), and capital-energy and labor-energy are both Morishima substitute. All factor demands become more elastic, and all elasticities of substitution increase. The implication is that the accelerated marketization contributes substantially to energy efficiency improvement since 1993

Maximum herd efficiency in meat production II. The influence of ...

African Journals Online (AJOL)

surface in terms of plots of total efficiency against percentages of mature body .... Dickerson (1978) shows that, for cattle and sheep, the energy .... protein metabolism. ... metric slope b is a scale-free parameter is convenient and .... Simulation.

Application and importance of cost-benefit analysis in energy efficiency projects implemented in public buildings: The case of Serbia

Directory of Open Access Journals (Sweden)

Đurovic Dejan M.

2012-01-01

Full Text Available The main objective of this paper is to present the advantages of using Cost-Benefit analysis in energy efficiency projects implemented in public buildings, and to prove the hypothesis that Cost-Benefit analysis boosts the effectiveness and efficiency of the said type of projects. The paper offers theoretical and practical explanation of the implementation of Cost-Benefit analysis in the relevant area. Since energy efficiency projects in public buildings usually represent a part of a broader portfolio of similar projects and their implementation demands allocation of substantial financial resources, communities are often be interested in achieving maximal economic and non-economic benefits. This paper aims to demonstrate that Cost-Benefit analysis can represent an excellent contribution when attempting to select the projects for implementation within a broader portfolio of energy efficiency projects in public buildings. This hypothesis was demonstrated by putting a greater emphasis on non-economic benefits and the costs arising from implementation of the aforementioned types of projects. In addition, a practical test of this hypothesis was performed through the implementation of an energy efficiency portfolio in public buildings, worth several tens of millions of dollars - the Serbian Energy Efficiency Project. The paper concludes that the use of Cost-Benefit analysis can help us to effectively evaluate and manage projects of this type aimed at achieving maximum benefits for the community in question.

Maximum Work of Free-Piston Stirling Engine Generators

Science.gov (United States)

Kojima, Shinji

2017-04-01

Using the method of adjoint equations described in Ref. [1], we have calculated the maximum thermal efficiencies that are theoretically attainable by free-piston Stirling and Carnot engine generators by considering the work loss due to friction and Joule heat. The net work done by the Carnot cycle is negative even when the duration of heat addition is optimized to give the maximum amount of heat addition, which is the same situation for the Brayton cycle described in our previous paper. For the Stirling cycle, the net work done is positive, and the thermal efficiency is greater than that of the Otto cycle described in our previous paper by a factor of about 2.7-1.4 for compression ratios of 5-30. The Stirling cycle is much better than the Otto, Brayton, and Carnot cycles. We have found that the optimized piston trajectories of the isothermal, isobaric, and adiabatic processes are the same when the compression ratio and the maximum volume of the same working fluid of the three processes are the same, which has facilitated the present analysis because the optimized piston trajectories of the Carnot and Stirling cycles are the same as those of the Brayton and Otto cycles, respectively.

Assessing Cross-disciplinary Efficiency of Soil Amendments for Agro-biologically, Economically, and Ecologically Integrated Soil Health Management

Science.gov (United States)

2010-01-01

Preventive and/or manipulative practices will be needed to maintain soil's biological, physiochemical, nutritional, and structural health in natural, managed, and disturbed ecosystems as a foundation for food security and global ecosystem sustainability. While there is a substantial body of interdisciplinary science on understanding function and structure of soil ecosystems, key gaps must be bridged in assessing integrated agro-biological, ecological, economical, and environmental efficiency of soil manipulation practices in time and space across ecosystems. This presentation discusses the application of a fertilizer use efficiency (FUE) model for assessing agronomic, economic, ecological, environmental, and nematode (pest) management efficiency of soil amendments. FUE is defined as increase in host productivity and/or decrease in plant-parasitic nematode population density in response to a given fertilizer treatment. Using the effects of nutrient amendment on Heterodera glycines population density and normalized difference vegetative index (indicator of physiological activities) of a soybean cultivar ‘CX 252’, how the FUE model recognizes variable responses and separates nutrient deficiency and toxicity from nematode parasitism as well as suitability of treatments designed to achieve desired biological and physiochemical soil health conditions is demonstrated. As part of bridging gaps between agricultural and ecological approaches to integrated understanding and management of soil health, modifications of the FUE model for analyzing the relationships amongst nematode community structure, soil parameters (eg. pH, nutrients, %OM), and plant response to soil amendment is discussed. PMID:22736840

A rapid, efficient, and economic device and method for the isolation and purification of mouse islet cells.

Directory of Open Access Journals (Sweden)

Yin Zongyi

Full Text Available Rapid, efficient, and economic method for the isolation and purification of islets has been pursued by numerous islet-related researchers. In this study, we compared the advantages and disadvantages of our developed patented method with those of commonly used conventional methods (Ficoll-400, 1077, and handpicking methods. Cell viability was assayed using Trypan blue, cell purity and yield were assayed using diphenylthiocarbazone, and islet function was assayed using acridine orange/ethidium bromide staining and enzyme-linked immunosorbent assay-glucose stimulation testing 4 days after cultivation. The results showed that our islet isolation and purification method required 12 ± 3 min, which was significantly shorter than the time required in Ficoll-400, 1077, and HPU groups (34 ± 3, 41 ± 4, and 30 ± 4 min, respectively; P 1000 islets. In summary, the MCT method is a rapid, efficient, and economic method for isolating and purifying murine islet cell clumps. This method overcomes some of the shortcomings of conventional methods, showing a relatively higher quality and yield of islets within a shorter duration at a lower cost. Therefore, the current method provides researchers with an alternative option for islet isolation and should be widely generalized.

INVESTIGATE TECHNO-ECONOMICAL ASPECTS OF PRESSURE BOOSTING STATIONS TO ENHANCE OIL EXTRACTION IN GACHSARAN

Directory of Open Access Journals (Sweden)

MAHMOOD EGHTESADIFARD

2017-10-01

Full Text Available The purpose of this study is to consider strategies and options for improving the efficiency of the pressure boosting station No. 4 in Gachsaran oil reserve (which is located in south-western of Iran. In order to achieve these objectives, the four rational options from technical and operational views were proposed and then these options went through an economic assessment. Next, by onsidering the other important criteria based on technical conditions (due to the necessity of evaluating other criteria beside economic criterion, decisionmaking techniques were employed. The results of economic evaluation show that the present value of the costs of option 1 is lower than other options and option 2 provides poorer economic status and is ranked last among the recommended options. Therefore, option 1 is 30.5 percent better than option 2. In addition, employing MCDM Technique allocated maximum weight (0.320 to economic evaluation criterion and again option 1 -with the highest weight (0.354- was the best possible option. Regards to purpose of this study, using techno-economical approach leads practitioners to decide based on technical and economic facts simultaneously.

Energy efficiency and economic value in affordable housing

International Nuclear Information System (INIS)

Chegut, Andrea; Eichholtz, Piet; Holtermans, Rogier

2016-01-01

Strong rental protection in the affordable housing market often prohibits landlords from charging rental premiums for energy-efficient dwellings. This may impede (re)development of energy efficient affordable housing. In the Netherlands, affordable housing institutions regularly sell dwellings from their housing stock to individual households. If they can sell energy efficient dwellings at a premium, this may stimulate investments in the environmental performance of homes. We analyze the value effects of energy efficiency in the affordable housing market, by using a sample of 17,835 homes sold by Dutch affordable housing institutions in the period between 2008 and 2013. We use Energy Performance Certificates to determine the value of energy efficiency in these transactions. We document that dwellings with high energy efficiency sell for 2.0–6.3% more compared to otherwise similar dwellings with low energy efficiency. This implies a premium of some EUR 3,000 to EUR 9,700 for highly energy efficient affordable housing. - Highlights: • Dutch affordable housing suppliers recoup sustainability investment by selling dwellings. • Energy-efficient affordable dwellings sell at a premium. • A-labeled dwellings are 6.3% – 9,300 euros – more valuable than C-labeled ones. • The combined value effect of refurbishing an affordable housing dwelling, including improving the energy efficiency, of 20% would more than pay for the retrofit.

Determining the Efficiency of Adaptation of Foreign Economic Activity of Machine-Building Enterprises in Conditions of Deepening the European Integration Process of Ukraine

Directory of Open Access Journals (Sweden)

Semeniuk Iryna Yu.

2018-02-01

Full Text Available The article determines that introduction and implementation of the mechanism for foreign economic adaptation of machine-building enterprises to the conditions of the European integration processes requires constant monitoring of the processes of export-import operations and the adaptation activities to identify current problems and avoid risks. It has been found that one of the monitoring instruments is the system of indicators, which provides to evaluate the efficiency of use of the mechanism for foreign economic adaptation of a machine-building enterprise by comparing the values of the obtained indicators after accomplishing adaptation changes with the values of the indicators of previous periods. It is suggested to determine efficiency of adaptation of foreign economic activity of machine-building enterprises to conditions of deepening of the European integration process of Ukraine by means of: index of change of volume of exported production of a machine-building enterprise to the EU countries; weighted average of the change in the share of the European market, which is covered by the enterprise’s products; indicator of efficiency of exports of production of a machine-building enterprise to the European Union countries; indicator of the index of changes in the volume of permanent orders from European partners; integral indicator of efficiency of use of adaptive potential of a machine-building enterprise in conditions of integration processes.

The Betz-Joukowsky limit for the maximum power coefficient of wind turbines

DEFF Research Database (Denmark)

Okulov, Valery; van Kuik, G.A.M.

2009-01-01

The article addresses to a history of an important scientific result in wind energy. The maximum efficiency of an ideal wind turbine rotor is well known as the ‘Betz limit’, named after the German scientist that formulated this maximum in 1920. Also Lanchester, a British scientist, is associated...

The economic efficiency of conservation measures for amphibians in organic farming--results from bio-economic modelling.

Science.gov (United States)

Schuler, Johannes; Sattler, Claudia; Helmecke, Angela; Zander, Peter; Uthes, Sandra; Bachinger, Johann; Stein-Bachinger, Karin

2013-01-15

This paper presents a whole farm bio-economic modelling approach for the assessment and optimisation of amphibian conservation conditions applied at the example of a large scale organic farm in North-Eastern Germany. The assessment focuses mainly on the habitat quality as affected by conservation measures such as through specific adapted crop production activities (CPA) and in-field buffer strips for the European tree frog (Hyla arborea), considering also interrelations with other amphibian species (i.e. common spadefoot toad (Pelobates fuscus), fire-bellied toad (Bombina bombina)). The aim of the approach is to understand, analyse and optimize the relationships between the ecological and economic performance of an organic farming system, based on the expectation that amphibians are differently impacted by different CPAs. The modelling system consists of a set of different sub-models that generate a farm model on the basis of environmentally evaluated CPAs. A crop-rotation sub-model provides a set of agronomically sustainable crop rotations that ensures overall sufficient nitrogen supply and controls weed, pest and disease infestations. An economic sub-model calculates the gross margins for each possible CPA including costs of inputs such as labour and machinery. The conservation effects of the CPAs are assessed with an ecological sub-model evaluates the potential negative or positive effect that each work step of a CPA has on amphibians. A mathematical programming sub-model calculates the optimal farm organization taking into account the limited factors of the farm (e.g. labour, land) as well as ecological improvements. In sequential model runs, the habitat quality is to be improved by the model, while the highest possible gross margin is still to be achieved. The results indicate that the model can be used to show the scope of action that a farmer has to improve habitat quality by reducing damage to amphibian population on its land during agricultural activities

Application of Maximum Entropy Distribution to the Statistical Properties of Wave Groups

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

The new distributions of the statistics of wave groups based on the maximum entropy principle are presented. The maximum entropy distributions appear to be superior to conventional distributions when applied to a limited amount of information. Its applications to the wave group properties show the effectiveness of the maximum entropy distribution. FFT filtering method is employed to obtain the wave envelope fast and efficiently. Comparisons of both the maximum entropy distribution and the distribution of Longuet-Higgins (1984) with the laboratory wind-wave data show that the former gives a better fit.

Economic efficiency of legume-cereal intercrops in conditions of organic farming

Directory of Open Access Journals (Sweden)

Jaroslav Jánský

2010-01-01

Full Text Available The paper presents economic analysis of growing of legume-cereal intercropping in conditions of organic farming. Results of the analysis are based on data monitoring in chosen organic farms that grow LCI. In the paper there is also compared economic efficiency of LCI grown in organic and conventional farming system. Methodological solution results from costingness and earnings monitoring of LCI production in five chosen organic farms in the period 2007–2008.When evaluating costs existing in individual variants of LCI growing it is necessary to say that the selection of individual machines and machine aggregations represents the most important factor of influencing direct costs, namely with regard to the size of organic farms and to the area of individual field blocks. Under conditions of organic farms, the LCI production is also significantly influenced also by agrotechnical (tillage operations. As compared with conventional farms, the final yield of both green fodder and grain is lower by 14–38%. Total direct costs per hectare of harvested LCI acreage ranged in case of fodder production from 9.249 CZK to 11.620 CZK per hectare. In case of grain production, the corresponding costs ranged from 8.848 to 9.970 CZK per hectare. In case of LCI, the direct costs of organic farms per unit of production of both fodder and grain consist mainly of material costs, which represent 63–76% and 61–68% of total expenses associated with production of fodder and grain, respectively. These direct costs are influenced also by higher prices of inputs.

Fuel cell-based CHP system modelling using Artificial Neural Networks aimed at developing techno-economic efficiency maximization control systems

International Nuclear Information System (INIS)

Asensio, F.J.; San Martín, J.I.; Zamora, I.; Garcia-Villalobos, J.

2017-01-01

This paper focuses on the modelling of the performance of a Polymer Electrolyte Membrane Fuel Cell (PEMFC)-based cogeneration system to integrate it in hybrid and/or connected to grid systems and enable the optimization of the techno-economic efficiency of the system in which it is integrated. To this end, experimental tests on a PEMFC-based cogeneration system of 600 W of electrical power have been performed to train an Artificial Neural Network (ANN). Once the learning of the ANN, it has been able to emulate real operating conditions, such as the cooling water out temperature and the hydrogen consumption of the PEMFC depending on several variables, such as the electric power demanded, temperature of the inlet water flow to the cooling circuit, cooling water flow and the heat demanded to the CHP system. After analysing the results, it is concluded that the presented model reproduces with enough accuracy and precision the performance of the experimented PEMFC, thus enabling the use of the model and the ANN learning methodology to model other PEMFC-based cogeneration systems and integrate them in techno-economic efficiency optimization control systems. - Highlights: • The effect of the energy demand variation on the PEMFC's efficiency is predicted. • The model relies on experimental data obtained from a 600 W PEMFC. • It provides the temperature and the hydrogen consumption with good accuracy. • The range in which the global energy efficiency could be improved is provided.

Economic efficiency of high-rise construction in the Moscow program of renovation of housing stock

Science.gov (United States)

Misailovov, Andrey

2018-03-01

The article considers a new initiative of the regional authorities of updating the housing stock designated as the renovation of housing. Its main aspects are analyzed, including the nature of program, economic efficiency of its implementation due to high-rise construction and the regulatory and legislative framework, the procedure for implementing the program, and the time frame for its implementation. The role of the program for regions in which high depreciation of the housing stock is combined with a limited number of sites for a new housing construction is disclosed. The high-rise construction in the renovation program is presented as a variant of a successful solution not only of the tasks of renovating the housing stock, but also of filling the regional budget. The social and economic orientation of the high-rise construction and the involvement of residents in the process of making town-planning decisions in the field of high-rise construction at all stages of implementing the program are shown.

[Ethics versus economics in public health? On the integration of economic rationality in a discourse of public health ethics].

Science.gov (United States)

Rothgang, H; Staber, J

2009-05-01

In the course of establishing the discourse of public health ethics in Germany, we discuss whether economic efficiency should be part of public health ethics and, if necessary, how efficiency should be conceptualized. Based on the welfare economics theory, we build a theoretical framework that demands an integration of economic rationality in public health ethics. Furthermore, we consider the possible implementation of welfare efficiency against the background of current practice in an economic evaluation of health care in Germany. The indifference of the welfare efficiency criterion with respect to distribution leads to the conclusion that efficiency must not be the only criteria of public health ethics. Therefore, an ethical approach of principles should be chosen for public health ethics. Possible conflicts between principles of such an approach are outlined.

Maximum herd efficiency in meat production I. Optima for slaughter ...

African Journals Online (AJOL)

Profit rate for a meat production enterprise can be decomposedinto the unit price for meat and herd ... supply and demand, whereas breeding improvement is gen- ... Herd efficiency is total live mass for slaughter divided by costs .... tenance and above-maintenance components by Dickerson, and ..... Growth and productivity.

The influence of population on the economic efficiency of the metropolitan governance

Directory of Open Access Journals (Sweden)

Yuriy V. Pavlov

2017-01-01

the expected value when implementing different metropolitan governance model. If the comparison showed the non-optimality of the implemented model for some index of the economic growth, then the values of the economic growth in the metropolitan area and the national average were compared. As a result, a recommendationwas given for the metropolitan area on the degree of need for the management reform and an optimal metropolitan governance model was selected.Results. Based on the revealed regularities, we have created a methodical approach to choose the optimal model of metropolitan governance according to the population size. It can be used as a tool to justify metropolitan governance reform. The advantage of the approach is the use of real quantitative data that reduces the degree of subjectivity in decision-making Conclusion. The methodical approach is tested on the example of eightmetropolitan areas (Lublin, Palermo, Krakow, Paris, Stuttgart, Madrid, Geneva, and Linz. It was revealed that there is no metropolitan governance model, which is always more efficient for all objects. As the result of the analysis for Geneva, the degree of need for management reforms was described as “high” with a recommendation for a transition to a decentralized metropolitan governance model. For Linz, Stuttgart and Madrid, the degree of need for reform is characterized as “low” with a recommendation for a transition to decentralization (Stuttgart and centralization (Linz and Madrid. The rest of the metropolitan areas of the sample do not need reforms.

Parametric optimization of thermoelectric elements footprint for maximum power generation

DEFF Research Database (Denmark)

Rezania, A.; Rosendahl, Lasse; Yin, Hao

2014-01-01

The development studies in thermoelectric generator (TEG) systems are mostly disconnected to parametric optimization of the module components. In this study, optimum footprint ratio of n- and p-type thermoelectric (TE) elements is explored to achieve maximum power generation, maximum cost......-performance, and variation of efficiency in the uni-couple over a wide range of the heat transfer coefficient on the cold junction. The three-dimensional (3D) governing equations of the thermoelectricity and the heat transfer are solved using the finite element method (FEM) for temperature dependent properties of TE...... materials. The results, which are in good agreement with the previous computational studies, show that the maximum power generation and the maximum cost-performance in the module occur at An/Ap

Maximum efficiency of wind turbine rotors using Joukowsky and Betz approaches

DEFF Research Database (Denmark)

Okulov, Valery; Sørensen, Jens Nørkær

2010-01-01

On the basis of the concepts outlined by Joukowsky nearly a century ago, an analytical aerodynamic optimization model is developed for rotors with a finite number of blades and constant circulation distribution. In the paper, we show the basics of the new model and compare its efficiency with res......On the basis of the concepts outlined by Joukowsky nearly a century ago, an analytical aerodynamic optimization model is developed for rotors with a finite number of blades and constant circulation distribution. In the paper, we show the basics of the new model and compare its efficiency...

The economic and environmental consequences of implementing nitrogen-efficient technologies and management practices in agriculture.

Science.gov (United States)

Zhang, Xin; Mauzerall, Denise L; Davidson, Eric A; Kanter, David R; Cai, Ruohong

2015-03-01

Technologies and management practices (TMPs) that reduce the application of nitrogen (N) fertilizer while maintaining crop yields can improve N use efficiency (NUE) and are important tools for meeting the dual challenges of increasing food production and reducing N pollution. However, because farmers operate to maximize their profits, incentives to implement TMPs are limited, and TMP implementation will not always reduce N pollution. Therefore, we have developed the NUE Economic and Environmental impact analytical framework (NUE) to examine the economic and environmental consequences of implementing TMPs in agriculture, with a specific focus on farmer profits, N fertilizer consumption, N losses, and cropland demand. Our analytical analyses show that impact of TMPs on farmers' economic decision-making and the environment is affected by how TMPs change the yield ceiling and the N fertilization rate at the ceiling and by how the prices of TMPs, fertilizer, and crops vary. Technologies and management practices that increase the yield ceiling appear to create a greater economic incentive for farmers than TMPs that do not but may result in higher N application rates and excess N losses. Nevertheless, the negative environmental impacts of certain TMPs could be avoided if their price stays within a range determined by TMP yield response, fertilizer price, and crop price. We use a case study on corn production in the midwestern United States to demonstrate how NUE can be applied to farmers' economic decision-making and policy analysis. Our NUE framework provides an important tool for policymakers to understand how combinations of fertilizer, crop, and TMP prices affect the possibility of achieving win-win outcomes for farmers and the environment. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Economical Efficiency of Combined Cooling Heating and Power Systems Based on an Enthalpy Method

Directory of Open Access Journals (Sweden)

Yan Xu

2017-11-01

Full Text Available As the living standards of Chinese people have been improving, the energy demand for cooling and heating, mainly in the form of electricity, has also expanded. Since an integrated cooling, heating and power supply system (CCHP will serve this demand better, the government is now attaching more importance to the application of CCHP energy systems. Based on the characteristics of the combined cooling heating and power supply system, and the method of levelized cost of energy, two calculation methods for the evaluation of the economical efficiency of the system are employed when the energy production in the system is dealt with from the perspective of exergy. According to the first method, fuel costs account for about 75% of the total cost. In the second method, the profits from heating and cooling are converted to fuel costs, resulting in a significant reduction of fuel costs, accounting for 60% of the total cost. Then the heating and cooling parameters of gas turbine exhaust, heat recovery boiler, lithium-bromide heat-cooler and commercial tariff of provincial capitals were set as benchmark based on geographic differences among provinces, and the economical efficiency of combined cooling heating and power systems in each province were evaluated. The results shows that the combined cooling heating and power system is economical in the developed areas of central and eastern China, especially in Hubei and Zhejiang provinces, while in other regions it is not. The sensitivity analysis was also made on related influencing factors of fuel cost, demand intensity in heating and cooling energy, and bank loans ratio. The analysis shows that the levelized cost of energy of combined cooling heating and power systems is very sensitive to exergy consumption and fuel costs. When the consumption of heating and cooling energy increases, the unit cost decreases by 0.1 yuan/kWh, and when the on-grid power ratio decreases by 20%, the cost may increase by 0.1 yuan

Chapter 4. Economic Considerations: Cost-Effective and Efficient Climate Policies

Directory of Open Access Journals (Sweden)

Maximilian Auffhammer

2016-12-01

Full Text Available In this chapter we discuss the economics of climate change. We begin with a discussion of economic considerations that are important to take into account when designing and evaluating climate policy, including cost effectiveness and efficiency. We then discuss specific policies at the state, national, and international level in light of these economic considerations.  We have several recommendations for the path forward for climate policy. First, the goal of climate policy should be to reduce the damages caused by greenhouse gases. In addition to mitigation policy to reduce greenhouse gas concentrations in the atmosphere, one can also reduce the damages causes by greenhouse gases by adaptation measures that reduce our vulnerability to climate change impacts.  Second, policy-makers should use incentive- (or market- based instruments as opposed to command and control policies (including quantity-based mandates whenever possible. Whenever unpriced emissions are the sole market failure, incentive-based instruments such as a carbon tax or cap and trade program are more likely to achieve the social optimum and maximize social net benefits [1, 2]. Lin and Prince [3] calculate that the optimal gasoline tax for the state of California is $1.37 per gallon.  Our third recommendation is to address the risk of emissions leakage, which arises when only one jurisdiction (e.g., California imposes climate policy, but not the entire world. One way to reduce emissions leakage is to use the strategic distribution of emissions allowances to local producers. This method, known as “output-based allocation” or benchmarking, effectively subsidizes local producers and at least partially offsets the increase in their costs caused by an emissions cap [4]. Importantly, only local production is eligible for an allocation of valuable allowances, providing a counterweight to the incentive for emission leakage. Our fourth recommendation is that if they are used instead

An evaluation of energy-environment-economic efficiency for EU, APEC and ASEAN countries: Design of a Target-Oriented DFM model with fixed factors in Data Envelopment Analysis

International Nuclear Information System (INIS)

Suzuki, Soushi; Nijkamp, Peter

2016-01-01

This paper aims to offer an advanced assessment methodology for sustainable national energy-environment-economic efficiency strategies, based on an extended Data Envelopment Analysis (DEA). The use of novel efficiency-improving approaches based on DEA originates from the so-called Distance Friction Minimisation (DFM) method. To design a feasible improvement strategy for low-efficiency DMUs, we develop here a Target-Oriented (TO) DFM model. However, in many real-world cases input factors may not be flexibly adjusted in the short run. In this study, we integrate the TO-DFM model with a fixed (inflexible) factor (FF) approach to cope with such more realistic circumstances. Super-efficiency DEA is next used in our comparative study on the efficiency assessment of energy-environment-economic targets for the EU, APEC and ASEAN (A&A) countries, employing appropriate data sets from the years 2003 to 2012. We consider two inputs (primary energy consumption and population) and two outputs (CO 2 and GDP), including a fixed input factor (viz. population). On the basis of our DEA analysis results, EU countries appear to exhibit generally a higher efficiency than A&A countries. The above-mentioned TO-DFM-FF projection model is able to address realistic circumstances and requirements in an operational sustainability strategy for efficiency improvement in inefficient countries in the A&A region. - Highlights: • We examine energy-environment-economic efficiency in European and A&A countries. • We present an operational efficiency improvement strategy using DEA. • European countries tend to have higher energy efficiency than A&A countries. • The study provides efficiency-enhancing strategic paths for inefficient countries.

Technical-economic study of energy efficiency in offshore industrial electrical systems; Estudio tecnico economico de eficiencia energetica en sistemas electricos industriales costa afuera

Energy Technology Data Exchange (ETDEWEB)

Fiscal Escalante, Raul [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2001-07-01

In this work the methodology of analysis and the results obtained are presented in an technical-economic study for the application of power efficiency measures for a marine platform. The methodology is considered in the following steps: 1) Technical evaluation of the installation 2) Technical analyses of the optimization alternatives 3) Economic evaluation of the selected optimization alternatives graphs of the thermal regime of the variation with respect to the generation, variation of the efficiency with respect to the generation, efficiency curve of the motor and the designed curve of the pump are presented. A table of general reference parameters and another one of particular reference is given. Also a table of the economic evaluation when changing the electrical motor by one more efficient is presented. It is concluded that a potential of energy saving exists in their processes, generating an opportunity to perform a technical-economic feasibility study in these facilities. [Spanish] En este trabajo se presenta la metodologia de analisis y los resultados obtenidos en un estudio tecnico-economico para la aplicacion de medidas de eficiencia energetica para una plataforma marina. Se plantea la metodologia en los siguientes pasos: 1) Evaluacion tecnica de la instalacion 2) Analisis tecnico de las alternativas de optimizacion 3) Evaluacion economica de las alternativas de optimizacion seleccionadas. Se muestran graficas de la variacion del regimen termico respecto a la generacion, variacion de la eficiencia respecto a la generacion, curva de eficiencia del motor y curva de diseno de la bomba. Se da una tabla de parametros de referencia generales y otra de referencia particulares. Tambien se presenta una tabla de la evaluacion economica al cambiar el motor electrico por uno mas eficiente. Se concluye que existe un potencial de ahorro de energia en sus procesos, generando una oportunidad para realizar estudios de factibilidad tecnica economica en dichas instalaciones.

An efficient technique to solve combined economic and emission ...

Indian Academy of Sciences (India)

2016-08-26

Aug 26, 2016 ... Economic load dispatch is one of the vital purposes in electrical power system operation, management and planning. Economic dispatch problem is one of the most important problems in electric power system operation. In large scale system, the problem is more complex and difficult to find out optimal ...

Minimum Wage and Maximum Hours Standards Under the Fair Labor Standards Act. Economic Effects Studies.

Science.gov (United States)

Wage and Labor Standards Administration (DOL), Washington, DC.

This report describes the 1966 amendments to the Fair Labor Standards Act and summarizes the findings of three 1969 studies of the economic effects of these amendments. The studies found that economic growth continued through the third phase of the amendments, beginning February 1, 1969, despite increased wage and hours restrictions for recently…

Evaluation of economical efficiency of the Osaki large hydroponic facilities; Osaki ogata suiko shisetsu no keizaisei hyoka

Energy Technology Data Exchange (ETDEWEB)

Yonezawa, K [Chugoku Electric Power Co. Inc., Hiroshima (Japan)

1996-03-25

A demonstrative test was conducted to verify economical efficiency of practical scale hydroponic horticulture under structure making use of a part of the Osaki thermal power plant to be constructed. In the test, the hydroponic culture of leek and tomatoes was carried out for six years starting 1989 to study its economical efficiency. Using the M-type hydroponic culture facilities, the structures are 1200m wide, 29m long, and 21 tons in the culture liquid level in case of leek, and 350m wide, 29m long, and 10 tons in the culture liquid level in case of tomatoes. The evaluation was made estimating the crop amount of leek as about 35 tons and that of tomatoes as about 60 tons and regarding that the sales amount is equal to the crop amount. The sales amount of leek is 28 million yen, and when seeking income/expenditure from expenses, deficit of 1 million yen per 30 a cannot be avoided excluding the equipment depreciation cost. As to tomatoes, the shipment cost is approximately 14 million yen without the equipment depreciation cost, but the sales amount is approximately 13-19 million yen largely affected by the unit price. A study on the sale method is needed. 7 figs., 11 tabs.

A welfare study into capture fisheries in cirata reservoir: a bio-economic model

Science.gov (United States)

Anna, Z.; Hindayani, P.

2018-04-01

Capture fishery in inland such as reservoirs can be a source of food security and even the economy and public welfare of the surrounding community. This research was conducted on Cirata reservoir fishery in West Java, to see how far reservoir capture fishery can contribute economically in the form of resource rents. The method used is the bioeconomic model Copes, which can analyze the demand and supply functions to calculate the optimization of stakeholders’ welfare in various management regimes. The results showed that the management of capture fishery using Maximum Economic Yield regime (MEY) gave the most efficient result, where fewer inputs would produce maximum profit. In the MEY management, the producer surplus obtained is IDR 2,610.203.099, - per quarter and IDR 273.885.400,- of consumer surplus per quarter. Furthermore, researches showed that sustainable management regime policy MEY result in the government rent/surplus ofIDR 217.891,345, - per quarter with the average price of fish per kg being IDR 13.929. In open access fishery, it was shown that the producer surplus becomesIDR 0. Thus the implementation of the MEY-based instrument policy becomes a necessity for Cirata reservoir capture fishery.

Effect of simplified feeding based only on wheat bran and brewer’s grain on rabbit performance and economic efficiency

Directory of Open Access Journals (Sweden)

Zakia Cherifi

2018-03-01

Full Text Available Simplified diets are based on maximum incorporation of fodder and/or by-products into animal feed, thus minimizing the formulation and the costs. This study aimed to evaluate the possibility of feeding fattening rabbits with a simplified diet composed of only two agro-industrial by-products inexpensive and locally available: brewer’s grain and wheat bran. At weaning (35 days, 68 rabbits were divided into two identical groups (mean weight = 833 g and housed in individual cages until slaughter (77 days. Each of the two groups (B0 and SF was fed ad libitum either a commercial pelleted feed (control, or a simplified pelleted  experimental diet "SF" containing 72% wheat bran and 27% brewer’s grain. The feed conversion was within the standards and similar in the two groups (3.55 on average. The growth rate and feed intake of B0 group were 12% higher (P <0.001 than that of the SF group (35.2g vs 31.2 and 128.3 vs 113 g/d. The cold carcass yield and the carcass weight were respectively higher (P <0.001 by 4 units and by 9% in the control group. The carcass of SF group was less fatty (perirenal fat: -23%, inguinal fat: -41% and scapular fat:-14%. The economic efficiency was 40% better for SF diet with almost 50 Algerian Dinar more benefit (/kg of meat.

An efficient and economical way to enhance the performance of present HTS Maglev systems by utilizing the anisotropy property of bulk superconductors

International Nuclear Information System (INIS)

Deng Zigang; Wang Jiasu; Zheng Jun; Zhang Ya; Wang Suyu

2013-01-01

We report a simple, efficient and economical way to enhance the levitation or guidance performance of present high-temperature superconducting (HTS) Maglev systems by exploring the anisotropic properties of the critical current density in the a–b plane and along the c-axis of bulk superconductors. In the method, the bulk laying mode with different c-axis directions is designed to match with the magnetic field configuration of the applied permanent magnet guideway (PMG). Experimental results indicate that more than a factor of two improvement in the levitation force or guidance force is achieved when changing the laying mode of bulk superconductors from the traditional fashion of keeping the c-axis vertical to the PMG surface to the studied one of keeping the c-axis parallel to the PMG surface, at the maximum horizontal and vertical magnetic field positions of the PMG, respectively. These phenomena resulted from the physical nature of the generated levitation force and guidance force (electromagnetic forces) and the fact that there are different critical current densities in the a–b plane and along the c axis. Based on the experimental results, new HTS Maglev systems can be designed to meet the requirements of practical heavy-load or curved-route applications. (paper)

An efficient and economical way to enhance the performance of present HTS Maglev systems by utilizing the anisotropy property of bulk superconductors

Science.gov (United States)

Deng, Zigang; Wang, Jiasu; Zheng, Jun; Zhang, Ya; Wang, Suyu

2013-02-01

We report a simple, efficient and economical way to enhance the levitation or guidance performance of present high-temperature superconducting (HTS) Maglev systems by exploring the anisotropic properties of the critical current density in the a-b plane and along the c-axis of bulk superconductors. In the method, the bulk laying mode with different c-axis directions is designed to match with the magnetic field configuration of the applied permanent magnet guideway (PMG). Experimental results indicate that more than a factor of two improvement in the levitation force or guidance force is achieved when changing the laying mode of bulk superconductors from the traditional fashion of keeping the c-axis vertical to the PMG surface to the studied one of keeping the c-axis parallel to the PMG surface, at the maximum horizontal and vertical magnetic field positions of the PMG, respectively. These phenomena resulted from the physical nature of the generated levitation force and guidance force (electromagnetic forces) and the fact that there are different critical current densities in the a-b plane and along the c axis. Based on the experimental results, new HTS Maglev systems can be designed to meet the requirements of practical heavy-load or curved-route applications.

Maximum Efficiency of Thermoelectric Heat Conversion in High-Temperature Power Devices

Directory of Open Access Journals (Sweden)

V. I. Khvesyuk

2016-01-01

Full Text Available Modern trends in development of aircraft engineering go with development of vehicles of the fifth generation. The features of aircrafts of the fifth generation are motivation to use new high-performance systems of onboard power supply. The operating temperature of the outer walls of engines is of 800–1000 K. This corresponds to radiation heat flux of 10 kW/m2 . The thermal energy including radiation of the engine wall may potentially be converted into electricity. The main objective of this paper is to analyze if it is possible to use a high efficiency thermoelectric conversion of heat into electricity. The paper considers issues such as working processes, choice of materials, and optimization of thermoelectric conversion. It presents the analysis results of operating conditions of thermoelectric generator (TEG used in advanced hightemperature power devices. A high-temperature heat source is a favorable factor for the thermoelectric conversion of heat. It is shown that for existing thermoelectric materials a theoretical conversion efficiency can reach the level of 15–20% at temperatures up to 1500 K and available values of Ioffe parameter being ZT = 2–3 (Z is figure of merit, T is temperature. To ensure temperature regime and high efficiency thermoelectric conversion simultaneously it is necessary to have a certain match between TEG power, temperature of hot and cold surfaces, and heat transfer coefficient of the cooling system. The paper discusses a concept of radiation absorber on the TEG hot surface. The analysis has demonstrated a number of potentialities for highly efficient conversion through using the TEG in high-temperature power devices. This work has been implemented under support of the Ministry of Education and Science of the Russian Federation; project No. 1145 (the programme “Organization of Research Engineering Activities”.

Energy expenditure, economic growth, and the minimum EROI of society

International Nuclear Information System (INIS)

Fizaine, Florian; Court, Victor

2016-01-01

We estimate energy expenditure for the US and world economies from 1850 to 2012. Periods of high energy expenditure relative to GDP (from 1850 to 1945), or spikes (1973–74 and 1978–79) are associated with low economic growth rates, and periods of low or falling energy expenditure are associated with high and rising economic growth rates (e.g. 1945–1973). Over the period 1960–2010 for which we have continuous year-to-year data for control variables (capital formation, population, and unemployment rate) we estimate that, statistically, in order to enjoy positive growth, the US economy cannot afford to spend more than 11% of its GDP on energy. Given the current energy intensity of the US economy, this translates in a minimum societal EROI of approximately 11:1 (or a maximum tolerable average price of energy of twice the current level). Granger tests consistently reveal a one way causality running from the level of energy expenditure (as a fraction of GDP) to economic growth in the US between 1960 and 2010. A coherent economic policy should be founded on improving net energy efficiency. This would yield a “double dividend”: increased societal EROI (through decreased energy intensity of capital investment), and decreased sensitivity to energy price volatility. - Highlights: •We estimate energy expenditures as a fraction of GDP for the US, the world (1850–2012), and the UK (1300–2008). •Statistically speaking, the US economy cannot afford to allocate more than 11% of its GDP to energy expenditures in order to have a positive growth rate. •This corresponds to a maximum tolerable average price of energy of twice the current level. •In the same way, US growth is only possible if its primary energy system has at least a minimum EROI of approximately 11:1.

Economic incentives for evidence generation: promoting an efficient path to personalized medicine.

Science.gov (United States)

Towse, Adrian; Garrison, Louis P

2013-01-01

The preceding articles in this volume have identified and discussed a wide range of methodological and practical issues in the development of personalized medicine. This concluding article uses the resulting insights to identify implications for the economic incentives for evidence generation. It argues that promoting an efficient path to personalized medicine is going to require appropriate incentives for evidence generation including: 1) a greater willingness on the part of payers to accept prices that reflect value; 2) consideration of some form of intellectual property protection (e.g., data exclusivity) for diagnostics to incentivize generation of evidence of clinical utility; 3) realistic expectations around the standards for evidence; and 4) public investment in evidence collection to complement the efforts of payers and manufacturers. It concludes that such incentives could build and maintain a balance among: 1) realistic thresholds for evidence and the need for payers to have confidence in the clinical utility of the drugs and tests they use; 2) payment for value, with prices that ensure cost-effectiveness for health systems; and 3) levels of intellectual property protection for evidence generation that provide a return for those financing research and development, while encouraging competition to produce both better and more efficient tests. Copyright © 2013, International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc.

Efficiency limits of rehabilitation of the Thermal Power Plant Turceni units

International Nuclear Information System (INIS)

Gheorghiu, D.; Stoenescu, R.; Balcan, I.; Panait, L.; Pressel, S.; Ghioca, L.

1996-01-01

The paper analyses the efficiency limits of the programs A 2 and A 3 of rehabilitation of the TPP Turceni units considering the current economic situation and the power and energy balances in the Romania's National Power System. Starting from the current net income and also, taking into account the performances which can be reached by the units to be rehabilitated, according to the guarantee figures provided by the German Consortium ABB-DBE, one is determined the maximum investment for rehabilitation so that the adjusted net income to be equal to the expenses and adjusted investments (reverse method). (author). 1 fig., 1 tab

Spatial-Temporal Dynamics of the Economic Efficiency of Construction Land in the Pearl River Delta Megalopolis from 1998 to 2012

Directory of Open Access Journals (Sweden)

Yuyao Ye

2017-12-01

Full Text Available Since the 1980s, the rapid, extensive, and dispersed urban expansion in the Pearl River Delta megalopolis (PRDM has led to landscape fragmentation and the inefficient use of construction land. Like other developed regions in China that are subject to the dual challenges of shortages of construction land and deterioration of the ecological environment, it is becoming increasingly important in the PRDM to improve the land-use efficiency of urban construction. However, current methods for assessing land-use efficiency do not meet the emerging needs of land-use planning and policymaking. Therefore, using the American Defense Meteorological Satellite Program (DMSP/Operational Linescan System (OLS nighttime light imagery and Landsat TM data, this study aims to develop a timely and efficient approach to model the high-resolution economic efficiency of construction land (EECL. With this approach, we mapped the reliable EECL of the PRDM at township level and with a one-kilometer grid. Next, the study compared the temporal changes and revealed the spatial-temporal dynamics in order to provide a scientific reference for informed land-use planning and policymaking. The results show that since 1998, the economic efficiency of construction land in the PRDM increased in general but varied significantly throughout the area. Further, these disparities widened from 1998 to 2012 between the PRDM’s inner and peripheral circles. Only one-fifth of the towns and subdistricts were categorized as fast-growth or ultrafast-growth, with the majority located in the most developed areas of the PRDM’s inner circle. In order to improve the efficiency of construction land in the PRDM and realize sustainable development, differentiated land-use policies for the inner and peripheral circles were proposed. The inner circle should focus on promoting the efficiency of existing construction land and encourage urban renewal, while the peripheral circle should enhance the control

Economic Analysis of Nuclear Energy

International Nuclear Information System (INIS)

Lee, Man Ki; Moon, K. H.; Kim, S. S.; Lim, C. Y.; Oh, K. B.

2006-12-01

It has been well recognized that securing economic viabilities along with technologies are very important elements in the successful implementation of nuclear R and D projects. The objective of the Project is to help nuclear energy to be utilized in an efficient way by analyzing major issues related with nuclear economics. The study covers following subjects: the role of nuclear in the future electric supply system, economic analysis of nuclear R and D project, contribution to the regional economy from nuclear power. In addition, the study introduces the international cooperation in the methodological area of efficient use of nuclear energy by surveying the international activities related with nuclear economics

Economic Analysis of Nuclear Energy

Energy Technology Data Exchange (ETDEWEB)

Lee, Man Ki; Moon, K. H.; Kim, S. S.; Lim, C. Y.; Oh, K. B

2006-12-15

It has been well recognized that securing economic viabilities along with technologies are very important elements in the successful implementation of nuclear R and D projects. The objective of the Project is to help nuclear energy to be utilized in an efficient way by analyzing major issues related with nuclear economics. The study covers following subjects: the role of nuclear in the future electric supply system, economic analysis of nuclear R and D project, contribution to the regional economy from nuclear power. In addition, the study introduces the international cooperation in the methodological area of efficient use of nuclear energy by surveying the international activities related with nuclear economics.

Dimensions of energy efficiency

International Nuclear Information System (INIS)

Ramani, K.V.

1992-01-01

In this address the author describes three dimensions of energy efficiency in order of increasing costs: conservation, resource and technology substitution, and changes in economic structure. He emphasizes the importance of economic rather than environmental rationales for energy efficiency improvements in developing countries. These countries do not place high priority on the problems of global climate change. Opportunities for new technologies may exist in resource transfer, new fuels and, possibly, small reactors. More research on economic and social impacts of technologies with greater sensitivity to user preferences is needed

Assessment of gender differentials in economic and technical efficiency of poultry egg, a case study in Lagos State, Nigeria.

Directory of Open Access Journals (Sweden)

Hafis Odunlami

2016-03-01

Full Text Available Gender has been seen as an important factor in the distribution and utilization of productive resources worldwide. In the agricultural sector, gender differential could influence the sourcing and efficient utilization of factors of production, particularly in the livestock sub-sector of the economy. This study assessed the gender differentials in economic and technical efficiency of poultry eggs production in Lagos State, Nigeria. Multistage sampling technique was used to select respondent poultry farmers. The first and second stages were the purposive selection of five Local Government Areas (LGAs reputed for poultry production and farm settlements in the state. The third stage involved a simple random sampling of 150 poultry farms consisting of 75 farms each managed by a male and a female Stochastic Frontier Analysis (SFA. The SFA revealed that for male management of poultry egg farms, labour input (p<0.01 and cost of medications (p<0.05 increased the poultry egg output. On the other hand, for female management, stock of birds (p<0.01, labour input (p<0.01 and feed cost (p<0.01 were the factors that increased poultry eggs output. The inefficiency model revealed that male farmers were more technically efficient (p<0.01 than female counterparts. Female managed poultry farms had less productivity (0.90 compared to males(1.22. However, 88.1% of male farms compared to 86.7% of female farms had economic efficiency ratios between 0.29 and 0.79. The study concluded that gender had impact on poultry farmers’ efficiency in the study area. The study therefore recommended that training should be organised for female managed farms while male managed farms should utilize less of cost intensive capital input.

Maximum power point tracking for photovoltaic solar pump based on ANFIS tuning system

Directory of Open Access Journals (Sweden)

S. Shabaan

2018-05-01

Full Text Available Solar photovoltaic (PV systems are a clean and naturally replenished energy source. PV panels have a unique point which represents the maximum available power and this point depend on the environmental conditions such as temperature and irradiance. A maximum power point tracking (MPPT is therefore necessary for maximum efficiency. In this paper, a study of MPPT for PV water pumping system based on adaptive neuro-fuzzy inference system (ANFIS is discussed. A comparison between the performance of the system with and without MPPT is carried out under varying irradiation and temperature conditions. ANFIS based controller shows fast response with high efficiency at all irradiance and temperature levels making it a powerful technique for non-linear systems as PV modules. Keywords: MPPT, ANFIS, Boost converter, PMDC pump

Efficiency of lead removal from drinking water using cationic resin Purolite

Directory of Open Access Journals (Sweden)

Ashour Mohammad Merganpour

2015-01-01

Full Text Available Background: Today, issues such as water shortage, difficulties and costs related to supplying safe water, and anomalous concentrations of heavy metals in groundwater and surface water resources, doubled the necessity of access to technical methods on removing these pollutants from water resources. Methods: In this lab study, cationic resin Purolite S-930 (with co-polymer styrene di-vinyl benzene structure was used for lead removal from drinking water containing up to 22 μg/L. Using statistical analysis and designing a full factorial experiment are the most important effective parameters on lead removal obtained through ion exchange process. Results: Analysis of response and interaction parameters of ion exchange showed that the resin column height has maximum and pH value has minimum effect on the efficiency of lead removal from aquatic environment. Trinary interaction of “effective size, flow rate, resin column high” has the most important for lead removal efficiency in this system. So the maximum efficiency was obtained at the mesh = 40, bed height =1.6 meter, and pH= 6.5. At the best operation conditions, ability to remove 95.42% of lead concentration can be achieved. Conclusion: Using the resin Purolite S-930 during 21-day service with 91.12% of mean lead removal ratio from drinking water is an economic and technical feasibility.

Power grid operation in a market environment economic efficiency and risk mitigation

CERN Document Server

2017-01-01

This book examines both system operation and market operation perspectives, focusing on the interaction between the two. It incorporates up-to-date field experiences, presents challenges, and summarizes the latest theoretic advancements to address those challenges. The book is divided into four parts. The first part deals with the fundamentals of integrated system and market operations, including market power mitigation, market efficiency evaluation, and the implications of operation practices in energy markets. The second part discusses developing technologies to strengthen the use of the grid in energy markets. System volatility and economic impact introduced by the intermittency of wind and solar generation are also addressed. The third part focuses on stochastic applications, exploring new approaches of handling uncerta nty in Security Constrained Unit Commitment (SCUC) as well as the reserves needed for power system operation. The fourth part provides ongoing efforts of utilizing transmission facilities ...

Petroleum production at Maximum Efficient Rate Naval Petroleum Reserve No. 1 (Elk Hills), Kern County, California

International Nuclear Information System (INIS)

1993-07-01

This document provides an analysis of the potential impacts associated with the proposed action, which is continued operation of Naval Petroleum Reserve No. I (NPR-1) at the Maximum Efficient Rate (MER) as authorized by Public law 94-258, the Naval Petroleum Reserves Production Act of 1976 (Act). The document also provides a similar analysis of alternatives to the proposed action, which also involve continued operations, but under lower development scenarios and lower rates of production. NPR-1 is a large oil and gas field jointly owned and operated by the federal government and Chevron U.SA Inc. (CUSA) pursuant to a Unit Plan Contract that became effective in 1944; the government's interest is approximately 78% and CUSA's interest is approximately 22%. The government's interest is under the jurisdiction of the United States Department of Energy (DOE). The facility is approximately 17,409 acres (74 square miles), and it is located in Kern County, California, about 25 miles southwest of Bakersfield and 100 miles north of Los Angeles in the south central portion of the state. The environmental analysis presented herein is a supplement to the NPR-1 Final Environmental Impact Statement of that was issued by DOE in 1979 (1979 EIS). As such, this document is a Supplemental Environmental Impact Statement (SEIS)

Estimation of Financial Agent-Based Models with Simulated Maximum Likelihood

Czech Academy of Sciences Publication Activity Database

Kukačka, Jiří; Baruník, Jozef

2017-01-01

Roč. 85, č. 1 (2017), s. 21-45 ISSN 0165-1889 R&D Projects: GA ČR(CZ) GBP402/12/G097 Institutional support: RVO:67985556 Keywords : heterogeneous agent model, * simulated maximum likelihood * switching Subject RIV: AH - Economics OBOR OECD: Finance Impact factor: 1.000, year: 2016 http://library.utia.cas.cz/separaty/2017/E/kukacka-0478481.pdf

ECONOMIC AND ACCOUNTING INFORMATION AND STOCK MARKET EFFICIENCY

Directory of Open Access Journals (Sweden)

Simona – Florina SĂLIȘTEANU

2014-05-01

Full Text Available The purpose of this paper is to explore and to analyse the relations between financial accounting information and stock market efficiency. As we know, accounting contributes to the efficiency of the stock market by producing primordial information for the investors. On the other side, an efficient market facilitates the role of accounting by providing a reliable estimate of the value of many assets that needs to be evaluated. This article examines the importance of the financial accounting information for the efficiency of stock market, and also analyses whether and how the structure, the characteristics and publication of the information, impacts the prices and transactions volumes.

Low-capacity wind power systems. Technology, legal aspects, economic efficiency; Kleine Windenergieanlagen. Technik - Recht - Wirtschaftlichkeit

Energy Technology Data Exchange (ETDEWEB)

Eggersgluess, Walter [Landwirtschaftskammer Schleswig-Holstein, Rendsburg (Germany); Eckel, Henning; Hartmann, Stefan [Kuratorium fuer Technik und Bauwesen in der Landwirtschaft e.V. (KTBL), Darmstadt (Germany)

2012-07-01

In what conditions will investments in a low-capacity wind power plant be profitable? This leaflet intends to provide a decision aid for farmers and other land owners interested in thes subject. It outlines the technology of low-capacity wind power systems, goes into site selection, expected yields and legal boundary conditions. The most important economic data are defined, and the economic efficiency of wind power plants of 7.5 to 25 kW is discussed. The text is supplemented by useful internet links. [German] Unter welchen Bedingungen rechnet sich die Investition in eine kleine Windenergieanlage? Das Heft hilft Landwirten sowie allen anderen investitionswilligen Grundstueckseigentuemern fuer sich Antworten auf diese Fragen zu finden und die richtigen Entscheidungen zu treffen. Es gibt einen Ueberblick ueber die Technik kleiner Windenergieanlagen, beschreibt was den richtigen Standort auszeichnet, mit welchen Energieertraegen gerechnet werden kann und welchen rechtlichen Rahmenbedingungen Bau und Betrieb der Anlagen unterliegen. Die wichtigsten wirtschaftlichen Kenngroessen werden definiert und die Wirtschaftlichkeit kleiner Windenergieanlagen anhand von Beispielanlagen im Leistungsbereich von 7,5 bis 25 kW diskutiert. Nuetzliche Internetadressen zum Thema Windenergie runden das Informationsangebot ab.

A Rapid, Highly Efficient and Economical Method of Agrobacterium-Mediated In planta Transient Transformation in Living Onion Epidermis

Science.gov (United States)

Xu, Kedong; Huang, Xiaohui; Wu, Manman; Wang, Yan; Chang, Yunxia; Liu, Kun; Zhang, Ju; Zhang, Yi; Zhang, Fuli; Yi, Liming; Li, Tingting; Wang, Ruiyue; Tan, Guangxuan; Li, Chengwei

2014-01-01

Transient transformation is simpler, more efficient and economical in analyzing protein subcellular localization than stable transformation. Fluorescent fusion proteins were often used in transient transformation to follow the in vivo behavior of proteins. Onion epidermis, which has large, living and transparent cells in a monolayer, is suitable to visualize fluorescent fusion proteins. The often used transient transformation methods included particle bombardment, protoplast transfection and Agrobacterium-mediated transformation. Particle bombardment in onion epidermis was successfully established, however, it was expensive, biolistic equipment dependent and with low transformation efficiency. We developed a highly efficient in planta transient transformation method in onion epidermis by using a special agroinfiltration method, which could be fulfilled within 5 days from the pretreatment of onion bulb to the best time-point for analyzing gene expression. The transformation conditions were optimized to achieve 43.87% transformation efficiency in living onion epidermis. The developed method has advantages in cost, time-consuming, equipment dependency and transformation efficiency in contrast with those methods of particle bombardment in onion epidermal cells, protoplast transfection and Agrobacterium-mediated transient transformation in leaf epidermal cells of other plants. It will facilitate the analysis of protein subcellular localization on a large scale. PMID:24416168

Economical utilization of hot water - an important precondition for an efficient utilization of waste heat in milk cooling

Energy Technology Data Exchange (ETDEWEB)

Kaiser, E; Pflug, C

1985-01-01

Indispensable both in the field of hydroecological and energy policies is the economical utilization of hot water. Hydroecological process analyses in specialized dairy cattle plants have shown that the specific mean annual abstraction of hot water (50/sup 0/C) may be reduced to 14 l per cow and per day. The proportionate contribution of different operational sectors and methods to arrive at the standards are pointed out. Economizing dairy cattly plants reducing hot water consumption as indicated and reaching average milking outputs of >= 1 l per cow and per day may thus bridge the summer season by heat recovery processes producing a sufficient quantity of hot water and allowing a shutdown of all heating units. At present the majority of dairy cattle plants cannot yet dispense with supplementary water during the remaining months. The hot water consumption rate is highest at the end of shifts. In double-shifted dairy cattle plants the estimated maximum hourly consumption amounts to 12 per cent of the average daily consumption. (orig.).

Maximum Likelihood, Consistency and Data Envelopment Analysis: A Statistical Foundation

OpenAIRE

Rajiv D. Banker

1993-01-01

This paper provides a formal statistical basis for the efficiency evaluation techniques of data envelopment analysis (DEA). DEA estimators of the best practice monotone increasing and concave production function are shown to be also maximum likelihood estimators if the deviation of actual output from the efficient output is regarded as a stochastic variable with a monotone decreasing probability density function. While the best practice frontier estimator is biased below the theoretical front...

Maximum power point tracker for photovoltaic power plants

Science.gov (United States)

Arcidiacono, V.; Corsi, S.; Lambri, L.

The paper describes two different closed-loop control criteria for the maximum power point tracking of the voltage-current characteristic of a photovoltaic generator. The two criteria are discussed and compared, inter alia, with regard to the setting-up problems that they pose. Although a detailed analysis is not embarked upon, the paper also provides some quantitative information on the energy advantages obtained by using electronic maximum power point tracking systems, as compared with the situation in which the point of operation of the photovoltaic generator is not controlled at all. Lastly, the paper presents two high-efficiency MPPT converters for experimental photovoltaic plants of the stand-alone and the grid-interconnected type.

The use of efficiency frontiers to evaluate the optimal land cover and irrigation practices for economic returns and ecosystem services

Science.gov (United States)

Kovacs, Kent; West, Grant; Xu, Ying

2017-04-01

Efficiency frontiers are a useful tool for governmental agencies that balance the protection of ecosystem services with the economic returns from an agricultural landscape because the tool illustrates that a compromise of objectives generates greater value to society than optimizing a sole objective. Policy makers facing the problem of groundwater overdraft on an agricultural landscape want to know if regulations or irrigation technology adoption will enhance both economic and ecosystem service benefits. Conjunctive water management with on-farm reservoirs and tail water recovery system is frequently suggested to alleviate groundwater and surface water quality problems in the Lower Mississippi River Basin of the United States, and this study evaluates the consequence of the adoption of this technology for the balance of ecosystem service and economic objectives. A compromise of objectives that maximizes the value to society provides 76% more value to society without reservoirs and 66% more value to society with reservoirs than the sole objective of economic returns. The reservoirs help an agricultural landscape maximizing economic returns to align more closely with a landscape maximizing the value to society, although there are still significant gains possible from finding a landscape that directly compromises on the objectives.

CANDU fuel cycle economic efficiency assessments using the IAEA-MESSAGE-V code

International Nuclear Information System (INIS)

Prodea, Iosif; Margeanu, Cristina Alice; Aioanei, Corina; Prisecaru, Ilie; Danila, Nicolae

2007-01-01

The main goal of the paper is to evaluate different electricity generation costs in a CANDU Nuclear Power Plant (NPP) using different nuclear fuel cycles. The IAEA-MESSAGE code (Model for Energy Supply Strategy Alternatives and their General Environmental Impacts) will be used to accomplish these assessments. This complex tool was supplied by International Atomic Energy Agency (IAEA) in 2002 at 'IAEA-Regional Training Course on Development and Evaluation of Alternative Energy Strategies in Support of Sustainable Development' held in Institute for Nuclear Research Pitesti. It is worthy to remind that the sustainable development requires satisfying the energy demand of present generations without compromising the possibility of future generations to meet their own needs. Based on the latest public information in the next 10-15 years four CANDU-6 based NPP could be in operation in Romania. Two of them will have some enhancements not clearly specified, yet. Therefore we consider being necessary to investigate possibility to enhance the economic efficiency of existing in-service CANDU-6 power reactors. The MESSAGE program can satisfy these requirements if appropriate input models will be built. As it is mentioned in the dedicated issues, a major inherent feature of CANDU is its fuel cycle flexibility. Keeping this in mind, some proposed CANDU fuel cycles will be analyzed in the paper: Natural Uranium (NU), Slightly Enriched Uranium (SEU), Recovered Uranium (RU) with and without reprocessing. Finally, based on optimization of the MESSAGE objective function an economic hierarchy of CANDU fuel cycles will be proposed. The authors used mainly public information on different costs required by analysis. (authors)

The economic crisis and the energy efficiency programs

International Nuclear Information System (INIS)

Naturesa, Jim Silva; Mariotoni, Carlos Alberto

2010-01-01

This paper presents some data from the Brazilian economy (2009 and 2010) and their impact on energy efficiency programs. It is also shown the main results of the National Electricity Conservation Program (PROCEL) and PROCEL INFO, which aims to gather and make available information on the rational and efficient use of energy. At the end, we present information showing that MSMEs (Micro, Small and Medium Companies) should be the main focus of the technological innovation programs aimed to energy efficiency. (author)

The Economic Problem: Can Islam Play an Effective Role in Solving it Efficiently as well as Equitably?

OpenAIRE

Chapra, M. Umer

2015-01-01

The generally recognized economic problem of mankind is how best to satisfy the basic needs of all people around the world in spite of the prevailing scarcity of resources. Since this is not happening, the paper argues that the primary reason is the secular worldview which has weakened the social and ethical foundations of human life and placed primary reliance on the market mechanism to ensure efficiency as well as justice in the use of resources. This has inadvertently ended up providing sa...

Solar water splitting by photovoltaic-electrolysis with a solar-to-hydrogen efficiency over 30%

Science.gov (United States)

Jia, Jieyang; Seitz, Linsey C.; Benck, Jesse D.; Huo, Yijie; Chen, Yusi; Ng, Jia Wei Desmond; Bilir, Taner; Harris, James S.; Jaramillo, Thomas F.

2016-01-01

Hydrogen production via electrochemical water splitting is a promising approach for storing solar energy. For this technology to be economically competitive, it is critical to develop water splitting systems with high solar-to-hydrogen (STH) efficiencies. Here we report a photovoltaic-electrolysis system with the highest STH efficiency for any water splitting technology to date, to the best of our knowledge. Our system consists of two polymer electrolyte membrane electrolysers in series with one InGaP/GaAs/GaInNAsSb triple-junction solar cell, which produces a large-enough voltage to drive both electrolysers with no additional energy input. The solar concentration is adjusted such that the maximum power point of the photovoltaic is well matched to the operating capacity of the electrolysers to optimize the system efficiency. The system achieves a 48-h average STH efficiency of 30%. These results demonstrate the potential of photovoltaic-electrolysis systems for cost-effective solar energy storage. PMID:27796309

Investigation of the radiative efficiency and threshold in InGaN laser diodes under the influence of efficiency droop

International Nuclear Information System (INIS)

Ryu, Han-Youl

2012-01-01

Based on the rate equation model of semiconductor lasers, the radiative efficiency and threshold current density of InGaN-based blue laser diodes (LDs) are theoretically investigated, including the effect of efficiency droop in the InGaN quantum wells. The peak point of the radiative efficiency versus current density relation is used as the parameter of the rate equation analysis. The threshold current density of InGaN blue LDs is found to depend strongly on the maximum radiative efficiency at low current density, implying that improving the maximum efficiency is important to maintain a high radiative efficiency at a large current density and to achieve a low-threshold lasing action under the influence of efficiency droop.

Analysis of economic and environmental benefits of a new heat pump air conditioning system with a heat recovery device

Science.gov (United States)

Li, lingxue

2017-08-01

The paper designs a new wind-water cooling and heating water conditioner system, connects cooling tower with heat recovery device, which uses cooling water to completely remove the heat that does not need heat recollection, in order to ensure that the system can work efficiently with higher performance coefficient. After the test actual engineering operation, the system’s maximum cooling coefficient of performance can reach 3.5. Its maximum comprehensive coefficient of performance can reach 6.5. After the analysis of its economic and environmental, we conclude that the new system can save 89822 kw per year. It reflects energy-saving and environmental benefits of the cold and hot water air conditioning system.

INVESTIGATION OF VEHICLE WHEEL ROLLING WITH MAXIMUM EFFICIENCY IN THE BRAKE MODE

Directory of Open Access Journals (Sweden)

D. Leontev

2011-01-01

Full Text Available Up-to-date vehicles are equipped by various systems of braking effort automatic control theparameters calculation of which do not as a rule have a rational solution. In order to increase theworking efficiency of such systems it is necessary to have the data concerning the impact of variousoperational factors on processes occurring at braking of the object of adjustment (vehicle wheel.Data availability concerning the impact of operational factors allows to decrease geometricalparameters of adjustment devices (modulators and maintain their efficient operation under variousexploitation conditions of vehicle’s motion.

Maximum super angle optimization method for array antenna pattern synthesis

DEFF Research Database (Denmark)

Wu, Ji; Roederer, A. G

1991-01-01

Different optimization criteria related to antenna pattern synthesis are discussed. Based on the maximum criteria and vector space representation, a simple and efficient optimization method is presented for array and array fed reflector power pattern synthesis. A sector pattern synthesized by a 2...

Maximum Profit Configurations of Commercial Engines

Directory of Open Access Journals (Sweden)

Yiran Chen

2011-06-01

Full Text Available An investigation of commercial engines with finite capacity low- and high-price economic subsystems and a generalized commodity transfer law [n ∝ Δ (P m] in commodity flow processes, in which effects of the price elasticities of supply and demand are introduced, is presented in this paper. Optimal cycle configurations of commercial engines for maximum profit are obtained by applying optimal control theory. In some special cases, the eventual state—market equilibrium—is solely determined by the initial conditions and the inherent characteristics of two subsystems; while the different ways of transfer affect the model in respects of the specific forms of the paths of prices and the instantaneous commodity flow, i.e., the optimal configuration.

Economic efficiency of Nuclear Cell Mars with reference to different regions with the account cogenerating production

International Nuclear Information System (INIS)

Alekseev, P. N.; Kucharkin, N. E.; Udjanskiy, Y. N.; Schepetina, T. D.; Subbotin, S. A.

2004-01-01

The popular belief in a low economic efficiency NPP with nuclear reactors of small capacity (SNPP) is stipulated by the stereotyped approach to their role as a power source (PS) and absence of a system approach to an estimation of their role and place in economy of regions. Actually, the specific expenses of installed capacity for SNPP can be some times higher than those for ones with high-power reactors. As a rule, pay back of the SNPP projects is justified proceeding from only the income of sale produced electric power and heat. Poor economic efficiency of such variant of use forces the developers to consider variants cogeneration of useful production, for example, power-desalination complexes. But thus it is not taken into account, that only nuclear power source (NPS), due to quality of long-term autonomy can ensure in hard-to-reach regions ecologically safe, practically unbounded on time, reliable energy provision of unique production manufacture, which can be yielded only in a sectional place and due to presence of reliable and ecologically acceptable power supply. Examples of such exclusive symbiosis of technologies can be enough, especially taking into account the factor of an ecological acceptability, which acquires the increasing weight at definition of competitiveness of the projects. The factor of uniqueness at technologies combination in a sectional context does not contradict the strategy of seriality small capacity NPS application, as they are irreplaceable for long-time and reliable power supply of the independent removed or hard-to-reach consumers. In this their special applicability and their specific energy niche, which not busy while by any another PS. On land their role is similar nuclear submarines, which thanking NPS have got completely other quality of autonomy in the discharge of underwater kettles.The territory of Russia on the area both variety of resources and manufactures allows to implement different variants and combinations of

Comparison of economic activity leading U.S. sports leagues

Directory of Open Access Journals (Sweden)

E.A. Strikalenko

2013-03-01

Full Text Available The main activities of the leading sports leagues were described. Sources of revenue and expenditure were identified. The economic performance of professional sports leagues of the United States of America was compared. In the course of the study of economic efficiency of the leading American sports leagues are defined payroll (expense commands on the salaries of players for each team, the total payroll in the League and the average payroll, respectively, for each of the American League. The largest estimates on wages, both in the League and in teams - in the National football League, the largest player's contract - in the Highest League baseball, the minimum wage in the National hockey League; the highest average wages, a greater percentage of athletes with a salary of more than 1 million. $ (82,85 % in the National basketball Association were showed. This difference in the maximum income of the League and of average wages is due to several factors: the number of players in the team, the number of games in a season, and expenses on carrying out of competition and training activities.

Economic evaluation of CISM : a pilot study

DEFF Research Database (Denmark)

Vogt, Joachim

2004-01-01

air traffic controllers, critical incident stress management, CISM, critical incidents, critical incident stress, cost-benefit-analysis, economic evaluation, efficiency, return on investment......air traffic controllers, critical incident stress management, CISM, critical incidents, critical incident stress, cost-benefit-analysis, economic evaluation, efficiency, return on investment...

Analysis of Economic Efficiency of Production of Low-Concentrated Sodium Hypochlorite by Direct Electrolysis of Natural Waters

Science.gov (United States)

Fesenko, L. N.; Pchelnikov, I. V.; Fedotov, R. V.

2017-11-01

The study presents the economic efficiency of direct electrolysis of natural waters in comparison with the waters artificially prepared by electrolysis of the 3% sodium salt solution. The study used sea water (Black sea water); mineral water (underground water of the Melikhovskaya station, “Ognennaya” hole); brackish water (underground water from the Grushevskaya station of the Aksai district); 3% solution of sodium salt. As a result, the dependences characterizing the direct electrolysis of natural waters with different mineralization, economic, and energy parties are shown. The rational area of the electrolysis for each of the investigated solution is determined. The cost of a kilogram of active chlorine obtained by the direct water electrolysis: Black sea from 17.2 to 18.3 RUB/kg; the Melikhovskaya station “Ognennaya” hole - 14.3 to 15.0 Rubles/kg; 3% solution of NaCl - 30 Rubles./kg; Grushevskogo St. - 63,0-73,0 Rubles/kg.

Evaluating the potential economic effectiveness of scientific research in the area of geological exploration for oil and gas

Energy Technology Data Exchange (ETDEWEB)

Vaynbaum, S Ya

1979-01-01

The category of ''potential effect'' is inherent to scientific developments in oil geology. This effect is associated with a quantity of labor in the sphere of scientific research which is embodied in the extracted information and stored until its complete use in production. The potential effect can be predicted. It is an indicator of economic effectiveness of scientific research. Distribution of the coefficient of creativity (innovation) for scientific research for geological exploration is suggested. The system of calculating the economic effect contains real stimuli for increasing economic efficiency. The most important of them are: establishment of the most promising trends for geological exploration which guarantee maximum increase in hydrocarbon reserves; decrease in net cost which will guarantee the obtaining of great profit; conducting of research on a higher level, in a large quantity of stages of work. This results in an increase in the percentage of participation of science in the production process, and this means, an increase in its economic effectiveness.

Biomass for energy production. Economic evaluation, efficiency comparison and optimal utilization of biomass; Biomasse zur Energiegewinnung. Oekonomische Bewertung, Effizienzvergleich und optimale Biomassenutzung

Energy Technology Data Exchange (ETDEWEB)

Zeddies, Juergen [Hohenheim Univ., Stuttgart (Germany). Inst. fuer Landwirtschaftliche Betriebslehre; Schoenleber, Nicole

2015-07-01

An optimized and/or goal-oriented use of available biomass feedstock for energetic conversion requires a detailed analysis of bioenergy production lines according to technical and economic efficiency indicators. Accordingly, relevant parameters of selected production lines supplying heat, electricity and fuel have been studied and used as data base for an optimization model. Most favorable combination of bioenergy lines considering political and economic objectives are analyzed by applying a specifically designed linear optimization model. Modeling results shall allow evaluation of political courses of action.

Circulation economics

DEFF Research Database (Denmark)

Ingebrigtsen, Stig; Jakobsen, Ove

2006-01-01

Purpose - This paper is an attempt to advance the critical discussion regarding environmental and societal responsibility in economics and business. Design/methodology/approach - The paper presents and discusses as a holistic, organic perspective enabling innovative solutions to challenges...... concerning the responsible and efficient use of natural resources and the constructive interplay with culture. To reach the goal of sustainable development, the paper argues that it is necessary to make changes in several dimensions in mainstream economics. This change of perspective is called a turn towards...... sustainability. To illustrate the theoretical discussion, the paper gives some practical examples from the reprocessing industry in Norway. Findings - The paper finds, first, effective and efficient use of natural resources is necessary to implement circular value chains. Second, sustainable development...

Search for the maximum efficiency of a ribbed-surfaces device, providing a tight seal

International Nuclear Information System (INIS)

Boutin, Jeanne.

1977-04-01

The purpose of this experiment was to determine the geometrical characteristics of ribbed surfaces used to equip devices in translation or slow rotation motion and having to form an acceptable seal between slightly viscous fluids. It systematically studies the pressure loss coefficient lambda in function of the different parameters setting the form of ribs and their relative position on the opposite sides. It shows that the passages with two ribbed surfaces lead to highly better results than those with only one, the maximum value of lambda, equal to 0.5, being obtained with the ratios: pitch/clearance = 5, depth of groove/clearance = 1,2, and with their teeth face to face on the two opposite ribbed surfaces. With certain shapes, alternate position of ribs can lead to the maximum of lambda yet lower than 0.5 [fr

Maximum Exergetic Efficiency Operation of a Solar Powered H2O-LiBr Absorption Cooling System

Directory of Open Access Journals (Sweden)

Camelia Stanciu

2017-12-01

Full Text Available A solar driven cooling system consisting of a single effect H2O-LiBr absorbtion cooling module (ACS, a parabolic trough collector (PTC, and a storage tank (ST module is analyzed during one full day operation. The pressurized water is used to transfer heat from PTC to ST and to feed the ACS desorber. The system is constrained to operate at the maximum ACS exergetic efficiency, under a time dependent cooling load computed on 15 July for a one storey house located near Bucharest, Romania. To set up the solar assembly, two commercial PTCs were selected, namely PT1-IST and PTC 1800 Solitem, and a single unit ST was initially considered. The mathematical model, relying on the energy balance equations, was coded under Engineering Equation Solver (EES environment. The solar data were obtained from the Meteonorm database. The numerical simulations proved that the system cannot cover the imposed cooling load all day long, due to the large variation of water temperature inside the ST. By splitting the ST into two units, the results revealed that the PT1-IST collector only drives the ACS between 9 am and 4:30 pm, while the PTC 1800 one covers the entire cooling period (9 am–6 pm for optimum ST capacities of 90 kg/90 kg and 90 kg/140 kg, respectively.

Maximum-performance fiber-optic irradiation with nonimaging designs.

Science.gov (United States)

Fang, Y; Feuermann, D; Gordon, J M

1997-10-01

A range of practical nonimaging designs for optical fiber applications is presented. Rays emerging from a fiber over a restricted angular range (small numerical aperture) are needed to illuminate a small near-field detector at maximum radiative efficiency. These designs range from pure reflector (all-mirror), to pure dielectric (refractive and based on total internal reflection) to lens-mirror combinations. Sample designs are shown for a specific infrared fiber-optic irradiation problem of practical interest. Optical performance is checked with computer three-dimensional ray tracing. Compared with conventional imaging solutions, nonimaging units offer considerable practical advantages in compactness and ease of alignment as well as noticeably superior radiative efficiency.

An Evolutionary Efficiency Alternative to the Notion of Pareto Efficiency

NARCIS (Netherlands)

I.P. van Staveren (Irene)

2012-01-01

textabstractThe paper argues that the notion of Pareto efficiency builds on two normative assumptions: the more general consequentialist norm of any efficiency criterion, and the strong no-harm principle of the prohibition of any redistribution during the economic process that hurts at least one

Government Expenditure, Efficiency and Economic Growth: A Panel ...

African Journals Online (AJOL)

Choong Chee Keong. 6 and Lau Lin Sea. 7 ... Corresponding Author, Department of Economics, Faculty of Business and Finance, UTAR, Malaysia. .... the taxation system and assert that if country's government expenditure is greater than.

A risk explicit interval linear programming model for uncertainty-based environmental economic optimization in the Lake Fuxian watershed, China.

Science.gov (United States)

Zhang, Xiaoling; Huang, Kai; Zou, Rui; Liu, Yong; Yu, Yajuan

2013-01-01

The conflict of water environment protection and economic development has brought severe water pollution and restricted the sustainable development in the watershed. A risk explicit interval linear programming (REILP) method was used to solve integrated watershed environmental-economic optimization problem. Interval linear programming (ILP) and REILP models for uncertainty-based environmental economic optimization at the watershed scale were developed for the management of Lake Fuxian watershed, China. Scenario analysis was introduced into model solution process to ensure the practicality and operability of optimization schemes. Decision makers' preferences for risk levels can be expressed through inputting different discrete aspiration level values into the REILP model in three periods under two scenarios. Through balancing the optimal system returns and corresponding system risks, decision makers can develop an efficient industrial restructuring scheme based directly on the window of "low risk and high return efficiency" in the trade-off curve. The representative schemes at the turning points of two scenarios were interpreted and compared to identify a preferable planning alternative, which has the relatively low risks and nearly maximum benefits. This study provides new insights and proposes a tool, which was REILP, for decision makers to develop an effectively environmental economic optimization scheme in integrated watershed management.

Applicability and economic efficiency of earthquake retrofit measures on existing buildings in Bucharest, Romania

Science.gov (United States)

Bostenaru, M.

2009-04-01

The research discussed in this contribution contains two aspects: on one side the economic efficiency of seismic retrofit measures, and on the other their applicability. The research was limited to housing buildings. Bucharest, the capital of Romania, was the object of the research. Strong earthquakes affect Bucharest about three times in a century, the damaging earthquakes of the 20th century being in 1940 and 1977. Other strong earthquakes occurred in 1986 and 1990. Since it is a broad topic, first the building type was determined, which should serve further research. For this scope the building types of the 20th century, which are common in Bucharest, Romania, were investigated. For each building type reports have been written, which comprised the earthquake resilient features, the seismic defficiencies, the damage patterns and the retrofit measures. Each of these features was listed for elements of the building. A first result of the research was an integrated system in order to include latter aspects in the planning in the first steps. So already at the building survey attention has to be paid on how a building is subdivided in order to be able to determine the economic efficiency of the planned action. So were defined the `retrofit elements`. In a first step the characteristics were defined, through which these retrofit elements (for example column, wall part between two windows) can be recognised in the building survey. In a further one, which retrofit measures can be connected to these. Diagrams were built, in order to visualise these findings. For each retrofit element and the corresponding measure the costs were calculated. Also, these retrofit elements and the measures connected to them were modelled for the simulation with the structural software, so that the benefit of the measures could be determined. In the part which regarded the economic efficiency, benefits and costs of retrofit measures had to be compared, so the improvement in the rigidity

THE IMPORTANCE OF LAW AND ECONOMICS IN THE CONTEMPORARY ECONOMIC REALITY

OpenAIRE

Pomaskow, Joanna

2015-01-01

The law and economics movement can improve the functioning of companies doing business in the contemporary, rapidly changing, reality. The tensions between the idea of efficiency and the idea of justice cause difficulties in the application of tools which are proposed by the representatives of the law and economics movement in legal solutions. Economics proposes a new, fresh look at the law, which makes it easier to assess and influence the growth of its transparency. Perspective can therefor...

Low-level radwaste engineering economics

International Nuclear Information System (INIS)

Jacobs, M.H.; Miller, C.C.; Young, L.G.

1984-07-01

This topical report on engineering economics for low-level radwaste systems details the methodologies used for economic analyses of radwaste treatment systems and provides examples of radwaste economic evaluations. All of the parameters and cost items used in an evaluation are defined. Examples of the present-value-of-revenue-requirements method, levelized-revenue-requirements method, and the equivalent-capital-investment method are provided. Also, the calculation to determine the maximum justifiable capital expenditure for a radwaste system is illustrated. The report also provides examples of economic evaluations for many current radwaste treatment options. These options include evaporation versus demineralization, dewatering resins versus solidification of resins, and several volume reduction systems. 15 figures, 6 tables

Thermodynamic and economic performances optimization of an organic Rankine cycle system utilizing exhaust gas of a large marine diesel engine

International Nuclear Information System (INIS)

Yang, Min-Hsiung; Yeh, Rong-Hua

2015-01-01

Highlights: • A new parameter is proposed for optimizing economic performance of the ORC system. • Maximal thermodynamic and economic performances of an ORC system are presented. • The corresponding operating pressures in turbine of optimum thermodynamic and economic performances are investigated. • An optimal effectiveness of pre-heater is obtained for the ORC system. - Abstract: The aim of this study is to investigate the thermodynamic and economic performances optimization for an ORC system recovering the waste heat of exhaust gas from a large marine diesel engine of the merchant ship. Parameters of net power output index and thermal efficiency are used to represent the economic and thermodynamic performances, respectively. The maximum net power output index and thermal efficiency are obtained and the corresponding turbine inlet pressure, turbine outlet pressure, and effectiveness of pre-heater of the ORC system are also evaluated using R1234ze, R245fa, R600, and R600a. Furthermore, the analyses of the effects of turbine inlet temperature and cooling water temperature on the optimal economic and thermodynamic performances of the ORC system are carried out. The results show that R245fa performs the most satisfactorily followed by R600, R600a, and R1234ze under optimal economic performance. However, in the optimal thermodynamic performance evaluations, R1234ze has the largest thermal efficiency followed by R600a, R245fa, and R600. The payback periods will decrease from 0.5 year for R245fa to 0.65 year for R1234ze respectively as the system is equipped with a pre-heater. In addition, compared with conventional diesel oil feeding, the proposed ORC system can reduce 76% CO 2 emission per kilowatt-hour

Theoretical assessment of the maximum power point tracking efficiency of photovoltaic facilities with different converter topologies

Energy Technology Data Exchange (ETDEWEB)

Enrique, J.M.; Duran, E.; Andujar, J.M. [Departamento de Ingenieria Electronica, de Sistemas Informaticos y Automatica, Universidad de Huelva (Spain); Sidrach-de-Cardona, M. [Departamento de Fisica Aplicada, II, Universidad de Malaga (Spain)

2007-01-15

The operating point of a photovoltaic generator that is connected to a load is determined by the intersection point of its characteristic curves. In general, this point is not the same as the generator's maximum power point. This difference means losses in the system performance. DC/DC converters together with maximum power point tracking systems (MPPT) are used to avoid these losses. Different algorithms have been proposed for maximum power point tracking. Nevertheless, the choice of the configuration of the right converter has not been studied so widely, although this choice, as demonstrated in this work, has an important influence in the optimum performance of the photovoltaic system. In this article, we conduct a study of the three basic topologies of DC/DC converters with resistive load connected to photovoltaic modules. This article demonstrates that there is a limitation in the system's performance according to the type of converter used. Two fundamental conclusions are derived from this study: (1) the buck-boost DC/DC converter topology is the only one which allows the follow-up of the PV module maximum power point regardless of temperature, irradiance and connected load and (2) the connection of a buck-boost DC/DC converter in a photovoltaic facility to the panel output could be a good practice to improve performance. (author)

Current control of PMSM based on maximum torque control reference frame

Science.gov (United States)

Ohnuma, Takumi

2017-07-01

This study presents a new method of current controls of PMSMs (Permanent Magnet Synchronous Motors) based on a maximum torque control reference frame, which is suitable for high-performance controls of the PMSMs. As the issues of environment and energy increase seriously, PMSMs, one of the AC motors, are becoming popular because of their high-efficiency and high-torque density in various applications, such as electric vehicles, trains, industrial machines, and home appliances. To use the PMSMs efficiently, a proper current control of the PMSMs is necessary. In general, a rotational coordinate system synchronizing with the rotor is used for the current control of PMSMs. In the rotating reference frame, the current control is easier because the currents on the rotating reference frame can be expressed as a direct current in the controller. On the other hand, the torque characteristics of PMSMs are non-linear and complex; the PMSMs are efficient and high-density though. Therefore, a complicated control system is required to involve the relation between the torque and the current, even though the rotating reference frame is adopted. The maximum torque control reference frame provides a simpler way to control efficiently the currents taking the torque characteristics of the PMSMs into consideration.

Research on the Sensorial Quality and Economic Efficiency in Obtaining of a certain Raw Meat Product - Mici Paste

OpenAIRE

Claudiu-Dan Salagean; Dorin Tibulca; Radu Marin

2013-01-01

Research aimed the sensorial quality connected with the economic efficiency to obtain a certain raw meat product (mici paste) in 4 experimental variants: 1 and 3 variants, with animal raw materials (meat + bacon) and mix of natural spices - fine grinding variant (1) and coarse grinding variant (3) - chopping at the volf through the sieve of 3-4 mm; 2 and 4 variants, with animal raw materials (meat + bacon) + vegetable protein supplements (textured soy protein) + binder (protein + fiber) + add...

Efficient harvesting of marine Chlorella vulgaris microalgae utilizing cationic starch nanoparticles by response surface methodology.

Science.gov (United States)

Bayat Tork, Mahya; Khalilzadeh, Rasoul; Kouchakzadeh, Hasan

2017-11-01

Harvesting involves nearly thirty percent of total production cost of microalgae that needs to be done efficiently. Utilizing inexpensive and highly available biopolymer-based flocculants can be a solution for reducing the harvest costs. Herein, flocculation process of Chlorella vulgaris microalgae using cationic starch nanoparticles (CSNPs) was evaluated and optimized through the response surface methodology (RSM). pH, microalgae and CSNPs concentrations were considered as the main independent variables. Under the optimum conditions of microalgae concentration 0.75gdry weight/L, CSNPs concentration 7.1mgdry weight/L and pH 11.8, the maximum flocculation efficiency (90%) achieved. Twenty percent increase in flocculation efficiency observed with the use of CSNPs instead of the non-particulate starch which can be due to the more electrostatic interactions between the cationic nanoparticles and the microalgae. Therefore, the synthesized CSNPs can be employed as a convenient and economical flocculants for efficient harvest of Chlorella vulgaris microalgae at large scale. Copyright © 2017 Elsevier Ltd. All rights reserved.

Higher energy efficiency in administrative and office buildings. Optimisation of primary energy consumption and economic efficiency; Energieeffiziente Buero- und Verwaltungsgebaeude. Hinweise zur primaerenergetischen und wirtschaftlichen Optimierung

Energy Technology Data Exchange (ETDEWEB)

Knissel, J.

1999-12-15

The study investigates measures to reduce primary energy consumption in administrative and office buildings and their effects in terms of economic efficiency. An exemplary office building is modernised step by step while recording the changes in the primary energy consumption coefficient. [German] In der vorliegenden Studie wird untersucht, wie weit und mit welchen Massnahmen der Primaerenergiebedarf von Buero- und Verwaltungsgebaeuden gesenkt werden kann und welche Auswirkungen dies auf die Wirtschaftlichkeit hat. Hierzu wird die energetische Ausfuehrungsqualitaet eines einfachen Beispielgebaeudes schrittweise verbessert und die Veraenderung des Primaerenergiekennwertes ermittelt. (orig.)

Evaluating the impact of the carbon dioxide capturing process on the indices of economic efficiency in thermal power plants

International Nuclear Information System (INIS)

Marukhyan, V.Z.; Elbakyan, S.H.

2017-01-01

Taking into account the input of carbon dioxide as a greenhouse gas in the global warming process, the technological solutions of its capturing, and the implementation possibilities in environmentally safe thermal power plants are considered. In power plants equipped with effective systems for cleaning the fuel gas and the coal gasification, the influence of the CO 2 reduction and realization of quotes on the indices of economic efficiency is estimated

Greenhouse gas emission measurement and economic analysis of Iran natural gas fired power plants

International Nuclear Information System (INIS)

Shahsavari Alavijeh, H.; Kiyoumarsioskouei, A.; Asheri, M.H.; Naemi, S.; Shahsavari Alavije, H.; Basirat Tabrizi, H.

2013-01-01

This study attempts to examine the natural gas fired power plants in Iran. The required data from natural gas fired power plants were gathered during 2008. The characteristics of thirty two gas turbine power plants and twenty steam power plants have been measured. Their emission factor values were then compared with the standards of Energy Protection Agency, Euro Union and World Bank. Emission factors of gas turbine and steam power plants show that gas turbine power plants have a better performance than steam power plants. For economic analysis, fuel consumption and environmental damages caused by the emitted pollutants are considered as cost functions; and electricity sales revenue are taken as benefit functions. All of these functions have been obtained according to the capacity factor. Total revenue functions show that gas turbine and steam power plants are economically efficient at 98.15% and 90.89% of capacity factor, respectively; this indicates that long operating years of power plants leads to reduction of optimum capacity factor. The stated method could be implemented to assess the economic status of a country’s power plants where as efficient capacity factor close to one means that power plant works in much better condition. - Highlights: • CO 2 and NO x emissions of Iran natural gas fired power plants have been studied. • CO 2 and NO x emission factors are compared with EPA, EU and World Bank standards. • Costs and benefit as economic functions are obtained according to capacity factor. • Maximum economic profit is obtained for gas turbine and steam power plants. • Investment in CO 2 reduction is recommended instead of investment in NO x reduction

A maximum power point tracking algorithm for buoy-rope-drum wave energy converters

Science.gov (United States)

Wang, J. Q.; Zhang, X. C.; Zhou, Y.; Cui, Z. C.; Zhu, L. S.

2016-08-01

The maximum power point tracking control is the key link to improve the energy conversion efficiency of wave energy converters (WEC). This paper presents a novel variable step size Perturb and Observe maximum power point tracking algorithm with a power classification standard for control of a buoy-rope-drum WEC. The algorithm and simulation model of the buoy-rope-drum WEC are presented in details, as well as simulation experiment results. The results show that the algorithm tracks the maximum power point of the WEC fast and accurately.

On economic efficiency of nuclear power unit life extension using steam-gas topping plant

International Nuclear Information System (INIS)

Kuznetsov, Y.N.; Lisitsa, F.D.; Smirnov, V.G.

2001-01-01

The different options for life extension of the operating nuclear power units have been analyzed in the report with regard for their economic efficiency. A particular attention is given to the option envisaging the reduction of reactor power output and its subsequent compensation with a steam-gas topping plant. Steam generated at its heat-recovery boilers is proposed to be used for the additional loading of the nuclear plant turbine so as to reach its nominal output. It would be demonstrated that the implementation of this option allows to reduce total costs in the period of power plant life extension by 24-29% as compared with the alternative use of the replacing steam-gas unit and the saved resources could be directed, for instance, for decommissioning of a reactor facility. (authors)

Growth indices and economic implications of weaned rabbits fed ...

African Journals Online (AJOL)

The better relative cost benefit (18.88%), economic efficiency and relative economic efficiency of 0.35 and 194.44%, respectively indicated the optimal level and economic benefit of LLPC inclusion at 10% (representing 2.40g/100g in the gross feed composition) replacement level for soybean meal in rabbit diets. Keywords: ...

Assessment of maximum available work of a hydrogen fueled compression ignition engine using exergy analysis

International Nuclear Information System (INIS)

Chintala, Venkateswarlu; Subramanian, K.A.

2014-01-01

This work is aimed at study of maximum available work and irreversibility (mixing, combustion, unburned, and friction) of a dual-fuel diesel engine (H 2 (hydrogen)–diesel) using exergy analysis. The maximum available work increased with H 2 addition due to reduction in irreversibility of combustion because of less entropy generation. The irreversibility of unburned fuel with the H 2 fuel also decreased due to the engine combustion with high temperature whereas there is no effect of H 2 on mixing and friction irreversibility. The maximum available work of the diesel engine at rated load increased from 29% with conventional base mode (without H 2 ) to 31.7% with dual-fuel mode (18% H 2 energy share) whereas total irreversibility of the engine decreased drastically from 41.2% to 39.3%. The energy efficiency of the engine with H 2 increased about 10% with 36% reduction in CO 2 emission. The developed methodology could also be applicable to find the effect and scope of different technologies including exhaust gas recirculation and turbo charging on maximum available work and energy efficiency of diesel engines. - Highlights: • Energy efficiency of diesel engine increases with hydrogen under dual-fuel mode. • Maximum available work of the engine increases significantly with hydrogen. • Combustion and unburned fuel irreversibility decrease with hydrogen. • No significant effect of hydrogen on mixing and friction irreversibility. • Reduction in CO 2 emission along with HC, CO and smoke emissions

THEORETICAL FOUNDATIONS EFFICIENT MASS VALUATION

Directory of Open Access Journals (Sweden)

Koshel A.

2016-08-01

Full Text Available In the article the theoretical basis for determining the effectiveness of mass valuation of land in present-day conditions are described. The concept defenitsy effect and effectiveness as economic categories and their classification values for mass valuation of land are presented. The effectiveness of mass valuation of land in the settlements defines the structure of local budget and economic activities undertaken by local authorities on the basis of the results of the mass appraisal of real estate. Mass valuation is regular and it is characterized by high degree of standardization of procedures and a significant increase in the role of statistical methods for processing data related to the use of the most significant factors influencing the parameters of the object to its cost, as well as the need to determine the value of the objective laws change equivalent, which is only possible when using economic and mathematical methods and statistical analysis. Quality control results of mass valuation carried out principally in other ways, as obtained by applying statistical machine results can be checked as soon statistical methods. This shows the relevance of research topic and lack of elaboration for Ukraine problems of efficiency of mass land valuation. Scientific research conducted through the use of the dialectical method and techniques of abstraction, comparative analysis and synthesis, the article various models and methods of valuation of land for taxation purposes are analyzed. In addition, the group explored methods used, comparisons, and more. In economic theory and practice problems and determine the effect of efficiency aimed at profit is quite relevant. Economists consider cost-effectiveness, such as economic efficiency. In this case, the production can be attributed to the activities to conduct and organization of mass valuation of land. This pushes many different positions on criteria and indicators of economic efficiency, the

Maximum power operation of interacting molecular motors

DEFF Research Database (Denmark)

Golubeva, Natalia; Imparato, Alberto

2013-01-01

, as compared to the non-interacting system, in a wide range of biologically compatible scenarios. We furthermore consider the case where the motor-motor interaction directly affects the internal chemical cycle and investigate the effect on the system dynamics and thermodynamics.......We study the mechanical and thermodynamic properties of different traffic models for kinesin which are relevant in biological and experimental contexts. We find that motor-motor interactions play a fundamental role by enhancing the thermodynamic efficiency at maximum power of the motors...

Determinants of energy efficiency across countries

Science.gov (United States)

Yao, Guolin

With economic development, environmental concerns become more important. Economies cannot be developed without energy consumption, which is the major source of greenhouse gas emissions. Higher energy efficiency is one means of reducing emissions, but what determines energy efficiency? In this research we attempt to find answers to this question by using cross-sectional country data; that is, we examine a wide range of possible determinants of energy efficiency at the country level in an attempt to find the most important causal factors. All countries are divided into three income groups: high-income countries, middle-income countries, and low-income countries. Energy intensity is used as a measurement of energy efficiency. All independent variables belong to two categories: quantitative and qualitative. Quantitative variables are measures of the economic conditions, development indicators and energy usage situations. Qualitative variables mainly measure political, societal and economic strengths of a country. The three income groups have different economic and energy attributes. Each group has different sets of variables to explain energy efficiency. Energy prices and winter temperature are both important in high-income and middle-income countries. No qualitative variables appear in the model of high-income countries. Basic economic factors, such as institutions, political stability, urbanization level, population density, are important in low-income countries. Besides similar variables, such as macroeconomic stability and index of rule of law, the hydroelectricity share in total electric generation is also a driver of energy efficiency in middle-income countries. These variables have different policy implications for each group of countries.

Economic and health efficiency of education funding policy.

Science.gov (United States)

Curtin, T R; Nelson, E A

1999-06-01

Public spending programmes to reduce poverty, expand primary education and improve the economic status of women are recommended priorities of aid agencies and are now gradually being reflected in third world governments' policies, in response to aid conditions imposed by the World Bank and OECD countries. However outcomes fall short of aspiration. This paper shows that donors' lending policies, especially those restricting public spending on education to the primary level, (1) perpetuate poverty, (2) minimise socio-economic impact of public health programmes and (3) prevent significant improvement in the economic status of women. These effects are the result of fundamental flaws in donors' education policy model. Evidence is presented to show that health status in developing countries will be significantly enhanced by increasing the proportion of the population which has at least post-primary education. Heads of households with just primary education have much the same probability of experiencing poverty and high mortality of their children as those with no education at all. Aid donors' policies, which require governments of developing countries to limit public funding of education to the primary level, have their roots in what is contended here to be an erroneous interpretation of human capital theory. This interpretation focuses only on the declining marginal internal rates of return on public investments in successive levels of schooling and ignores the opposite message of the increasing marginal net present values of those investments. Cars do not travel fastest in their lowest gear despite its fastest acceleration, life's long journey is not most comfortable for those with only primary schooling.

Use of efficient lamps in Brazil and the energetic and environmental gains; Emprego de lampadas eficientes no Brasil e os ganhos energeticos e ambientais

Energy Technology Data Exchange (ETDEWEB)

Haddad, Jamil; Nogueira, Luiz Augusto Horta; Cardoso, Rafael Balbino; Souza, Edson Palhares de [Universidade Federal de Itajuba (EXCEN/UNIFEI), MG (Brazil). Centro de Excelencia em Eficiencia Energetica], emails: jamil@unifei.edu.br, horta@unifei.edu.br, cardosorb@unifei.edu.br, palharess@unifei.edu.br

2010-07-01

This study esteem the energy, environmental and economical impacts the use of compact fluorescent lamps - CFL's in the Brazilian residential sector, considering data of the illumination systems ownership and use habits research in the sector, accomplished by PROCEL. According to evaluation the introduction of more efficient lamps in the sector resulted in 12.2 thousand GWh of energy saving (14.5% of the sector consumption) and in 4.4 GW of reduction in the pick demand (7% annual maximum demand registered) in 2005. The study also indicates positive impacts of the environmental and economical view point. (author)

Efficient algorithms for maximum likelihood decoding in the surface code

Science.gov (United States)

Bravyi, Sergey; Suchara, Martin; Vargo, Alexander

2014-09-01

We describe two implementations of the optimal error correction algorithm known as the maximum likelihood decoder (MLD) for the two-dimensional surface code with a noiseless syndrome extraction. First, we show how to implement MLD exactly in time O (n2), where n is the number of code qubits. Our implementation uses a reduction from MLD to simulation of matchgate quantum circuits. This reduction however requires a special noise model with independent bit-flip and phase-flip errors. Secondly, we show how to implement MLD approximately for more general noise models using matrix product states (MPS). Our implementation has running time O (nχ3), where χ is a parameter that controls the approximation precision. The key step of our algorithm, borrowed from the density matrix renormalization-group method, is a subroutine for contracting a tensor network on the two-dimensional grid. The subroutine uses MPS with a bond dimension χ to approximate the sequence of tensors arising in the course of contraction. We benchmark the MPS-based decoder against the standard minimum weight matching decoder observing a significant reduction of the logical error probability for χ ≥4.

Is the maximum permissible radiation burden for the population indeed permissible

International Nuclear Information System (INIS)

Renesse, R.L. van.

1975-01-01

It is argued that legislation based on the ICRP doses will, under economical influences, lead to a situation where the population is exposed to radiation doses near the maximum permissible dose. Due to cumulative radiation effects, this will introduce unacceptable health risks. Therefore, it will be necessary to lower the legal dose limit of 170 millrem per year per person by a factor 10 to 20

Energy efficiency potential study for New Brunswick

International Nuclear Information System (INIS)

1992-05-01

The economic and environmental impacts associated with economically attractive energy savings identified in each of four sectors in New Brunswick are analyzed. The results are derived through a comparison of two potential future scenarios. The frozen efficiency scenario projects what future energy expenditures would be if no new energy efficiency initiatives are introduced. The economic potential scenario projects what those expenditures would be if all economically attractive energy efficiency improvements were gradually implemented over the next 20 years. Energy related emissions are estimated under scenarios with and without fuel switching. The results show, for example, that New Brunswick's energy related CO 2 emissions would be reduced by ca 5 million tonnes in the year 2000 under the economic potential scenario. If fuel switching is adopted, an additional 1 million tonnes of CO 2 emissions could be saved in the year 2000 and 1.6 million tonnes in 2010. The economic impact analysis is restricted to efficiency options only and does not consider fuel switching. Results show the effect of the economic potential scenario on employment, government revenues, and intra-industry distribution of employment gains and losses. The employment impact is estimated as the equivalent of the creation of 2,424 jobs annually over 1991-2010. Government revenues would increase by ca $24 million annually. The industries benefitting most from energy efficiency improvements would be those related to construction, retail trade, finance, real estate, and food/beverages. Industries adversely affected would be the electric power, oil, and coal sectors. 2 figs., 37 tabs

Scintillation counter, maximum gamma aspect

International Nuclear Information System (INIS)

Thumim, A.D.

1975-01-01

A scintillation counter, particularly for counting gamma ray photons, includes a massive lead radiation shield surrounding a sample-receiving zone. The shield is disassembleable into a plurality of segments to allow facile installation and removal of a photomultiplier tube assembly, the segments being so constructed as to prevent straight-line access of external radiation through the shield into radiation-responsive areas. Provisions are made for accurately aligning the photomultiplier tube with respect to one or more sample-transmitting bores extending through the shield to the sample receiving zone. A sample elevator, used in transporting samples into the zone, is designed to provide a maximum gamma-receiving aspect to maximize the gamma detecting efficiency. (U.S.)

Comparing the efficiency of fixed solar cell panels in a tropical location

Energy Technology Data Exchange (ETDEWEB)

Jumrusprasert, Pattanapong; Smith, Geoff; Kirkup, Leslie [University of Technology, Sydney, NSW (Australia). Physics and Advanced Materials Department, Faculty of Science

2008-07-01

Monocrystalline, polycrystalline and amorphous silicon solar cell panels were installed side-by-side on the same fixed rig to determine the relative performance in a tropical location. This study was conducted at Nakhon Ratchasima Rajabhat University, Thailand. The fixed panel rig was positioned at a tilt angle of 30 , facing south. Overall performance of the solar cell panels is given via both annual output and an average conversion efficiency over one whole year. The results show that for a fixed orientation the monocrystalline, polycrystalline and amorphous panels, had average conversion efficiencies of 6.8%{+-}2.4%, 5.7%{+-}2.0% and 4.2%{+-}1.5% respectively in terms of total incident solar energies on the plane of cells which were 809.4 kW . a/m2, 860.8 kW . a/m2 and 820.6 kW.year/m{sup 2} respectively. The uncertainties shown represent the standard deviation in the conversion efficiencies determined over the 12 month period of the study. These conversion efficiencies are lower than expected but are in part due to local conditions and their significant impact on movements in the maximum power point, which was not tracked in these fixed load experiments. This study also examined the effects of ambient air temperature and wind speed close to the panels which in this locale had very little impact on conversion efficiency. A detailed economic analysis was then carried out including relative maintenance costs. In terms of return on investment the panels ranked in their performance order; fixed monocrystalline, then polycrystalline and finally amorphous but the overall economics was not attractive and significant system cost reductions are needed. (orig.)

Maximum power point tracker based on fuzzy logic

International Nuclear Information System (INIS)

Daoud, A.; Midoun, A.

2006-01-01

The solar energy is used as power source in photovoltaic power systems and the need for an intelligent power management system is important to obtain the maximum power from the limited solar panels. With the changing of the sun illumination due to variation of angle of incidence of sun radiation and of the temperature of the panels, Maximum Power Point Tracker (MPPT) enables optimization of solar power generation. The MPPT is a sub-system designed to extract the maximum power from a power source. In the case of solar panels power source. the maximum power point varies as a result of changes in its electrical characteristics which in turn are functions of radiation dose, temperature, ageing and other effects. The MPPT maximum the power output from panels for a given set of conditions by detecting the best working point of the power characteristic and then controls the current through the panels or the voltage across them. Many MPPT methods have been reported in literature. These techniques of MPPT can be classified into three main categories that include: lookup table methods, hill climbing methods and computational methods. The techniques vary according to the degree of sophistication, processing time and memory requirements. The perturbation and observation algorithm (hill climbing technique) is commonly used due to its ease of implementation, and relative tracking efficiency. However, it has been shown that when the insolation changes rapidly, the perturbation and observation method is slow to track the maximum power point. In recent years, the fuzzy controllers are used for maximum power point tracking. This method only requires the linguistic control rules for maximum power point, the mathematical model is not required and therefore the implementation of this control method is easy to real control system. In this paper, we we present a simple robust MPPT using fuzzy set theory where the hardware consists of the microchip's microcontroller unit control card and

Reconsidering energy efficiency

International Nuclear Information System (INIS)

Goldoni, Giovanni

2007-01-01

Energy and environmental policies are reconsidering energy efficiency. In a perfect market, rational and well informed consumers reach economic efficiency which, at the given prices of energy and capital, corresponds to physical efficiency. In the real world, market failures and cognitive frictions distort the consumers from perfectly rational and informed choices. Green incentive schemes aim at balancing market failures and directing consumers toward more efficient goods and services. The problem is to fine tune the incentive schemes [it

The Factors Influencing Economic Efficiency of the Hospital Bed Care in Terms of the Regional Allowance Organizations

Directory of Open Access Journals (Sweden)

Vaňková Ivana

2014-09-01

Full Text Available This paper aims to provide an efficiency evaluation of selected hospital bed care providers during years 2010 -2012 with respect to selected factors: The size of the hospital establishment according to number of beds, number of hospitalized patients, the average length of stay per a patient in care, total staff cost calculated per bed, total revenues calculated per bed, and total costs calculated per bed. For this purpose, hospitals providing primarily acute bed care were chosen. From the legal point of view, they are allowance organizations of a particular region. The evaluation concerns both allocative efficiency and technical efficiency. The allocative efficiency is treated from the proper algorithm point of view and it compares total costs calculated per bed with total revenues calculated per bed. A method denominated Data Envelopment Analysis was applied for the calculation of the technical efficiency of units. To be more specific, it was input-oriented model with constant returns to scale (CCR. The input parameters involve the number of beds, the average length of stay and costs per day of stay. Output parameters were as follows: Bed occupancy in days and the number of hospitalized patients. The data published by the Institute of Health Information and Statistic of the Czech Republic and by ÚFIS system (the Data Base of Ministry of Finance of the Czech Republic were used as the source of data. The evaluation implies that only three hospitals were economically-effective: Silesian Hospital in Opava, Hospital Jihlava, and TGM Hospital Hodonín. The most significant factor influencing the efficiency was determined - the average length of stay.

Global Harmonization of Maximum Residue Limits for Pesticides.

Science.gov (United States)

Ambrus, Árpád; Yang, Yong Zhen

2016-01-13

International trade plays an important role in national economics. The Codex Alimentarius Commission develops harmonized international food standards, guidelines, and codes of practice to protect the health of consumers and to ensure fair practices in the food trade. The Codex maximum residue limits (MRLs) elaborated by the Codex Committee on Pesticide Residues are based on the recommendations of the FAO/WHO Joint Meeting on Pesticides (JMPR). The basic principles applied currently by the JMPR for the evaluation of experimental data and related information are described together with some of the areas in which further developments are needed.

The Financial Regulation of the Country’s Economic Development

Directory of Open Access Journals (Sweden)

Davydova Irina I.

2017-12-01

Full Text Available The article is aimed at disclosing the essence of the system of financial regulation of economic development of the country, defining institutional foundations in the process of development of financial mechanism. Approaches to strengthening the efficiency of financial policy as an important economic institution, which should significantly influence economic growth, have been developed. The directions of increase of efficiency of budget policy in conditions of institutional changes have been defined. Currently, financial regulation of the country is being formed in the context of socio-economic policy, which is resulting from the need for the State participation in the world economic and financial relations, for improving the quality of public services on the part of the State, which requires the implementation of a strategy of economic growth at a qualitatively new institutional level. The State financial policy should ultimately focus on the appropriate endogenous factors of economic growth. In modern conditions it is expedient to strengthen the role of financial policy as a significant macro-economic instrument, which provides an effective influence on achievement of financial and economic balance, efficiency of economic transformations.

CHARACTERISTICS OF MANAGEMENT AND LEADERSHIP IN ORDER TO EFFICIENTLY ACHIEVE THE ORGANIZATIONAL CHANGES PRODUCED BY THE ECONOMIC CRISIS

Directory of Open Access Journals (Sweden)

Iuliana Talmaciu

2015-05-01

Full Text Available Change has become the watchword of the present times. The dynamism of economic, social and political life is becoming more pronounced and it determines numerous organizational changes. In times of crisis and during the following periods, companies face major challenges, changes becoming even harder to anticipate and plan. The economic difficulties encountered by the business environment can be a decisive test for the leaders of companies. The main purpose of this article is to analyze the leadership characteristics which are necessary to efficiently manage and implement organizational changes during crisis. The research method used in this paper was based on the content analysis of works by both Romanian and foreign authors and on some studies conducted by different specialized companies. This paper is structured as follows: introduction, aspects regarding managers' role in change management, characteristics needed by the leaders involved in the change process, conclusions and biography.

Experimental Determination of Operating and Maximum Power Transfer Efficiencies at Resonant Frequency in a Wireless Power Transfer System using PP Network Topology with Top Coupling

Science.gov (United States)

Ramachandran, Hema; Pillai, K. P. P.; Bindu, G. R.

2017-08-01

A two-port network model for a wireless power transfer system taking into account the distributed capacitances using PP network topology with top coupling is developed in this work. The operating and maximum power transfer efficiencies are determined analytically in terms of S-parameters. The system performance predicted by the model is verified with an experiment consisting of a high power home light load of 230 V, 100 W and is tested for two forced resonant frequencies namely, 600 kHz and 1.2 MHz. The experimental results are in close agreement with the proposed model.

Productivity and efficiency of economic activity of the Lower Silesia's large area farms in comparison with other large area farms in Poland

Directory of Open Access Journals (Sweden)

Stanisław Minta

2009-01-01

Full Text Available The paper shows economical and financial situation of the agricultural companies which have most of the grounds in lease. Analysed objects were settled on Lower Silesia (the province in the south – west Poland. The main part of the results of research was about productivity and efficiency of economic resources in these objects. The research was made in years 2000-2002. The results of research in analyzed Lower Silesia’s companies were compared with the best Polish large area farms in order of law and organisation forms: leased farms, private farms and partnerships of Polish public agency AWRSP.

Estimation of Maximum Allowable PV Connection to LV Residential Power Networks

DEFF Research Database (Denmark)

Demirok, Erhan; Sera, Dezso; Teodorescu, Remus

2011-01-01

Maximum photovoltaic (PV) hosting capacity of low voltage (LV) power networks is mainly restricted by either thermal limits of network components or grid voltage quality resulted from high penetration of distributed PV systems. This maximum hosting capacity may be lower than the available solar...... potential of geographic area due to power network limitations even though all rooftops are fully occupied with PV modules. Therefore, it becomes more of an issue to know what exactly limits higher PV penetration level and which solutions should be engaged efficiently such as over sizing distribution...

Saving, efficiency and management of electric sector demand

International Nuclear Information System (INIS)

Sanchez de Tembleque, L. J.

2007-01-01

Spanish economic model of development is based on energy consumption, and its main source is imported fossil fuels, which have some environmental and scarcity consequences in the mid term, among others. These problems could be reduced in two ways: economic activity reduction or energy efficiency improvement. In the presence of these possibilities, It may be desirable to bet for saving and energy efficiency, to maintain the economic development. This assignment analyzes the main available regulatory and social mechanisms to promote saving and energy efficiency in the power sector, like systems to internalize social costs in the electricity price, efficiency standards, and encourage the new saving culture. (Author) 15 refs

Maximum Power Point Tracking Control of Photovoltaic Systems: A Polynomial Fuzzy Model-Based Approach

DEFF Research Database (Denmark)

Rakhshan, Mohsen; Vafamand, Navid; Khooban, Mohammad Hassan

2018-01-01

This paper introduces a polynomial fuzzy model (PFM)-based maximum power point tracking (MPPT) control approach to increase the performance and efficiency of the solar photovoltaic (PV) electricity generation. The proposed method relies on a polynomial fuzzy modeling, a polynomial parallel......, a direct maximum power (DMP)-based control structure is considered for MPPT. Using the PFM representation, the DMP-based control structure is formulated in terms of SOS conditions. Unlike the conventional approaches, the proposed approach does not require exploring the maximum power operational point...

A conrparison of optirnunl and maximum reproduction using the rat ...

African Journals Online (AJOL)

of pigs to increase reproduction rate of sows (te Brake,. 1978; Walker et at., 1979; Kemm et at., 1980). However, no experimental evidence exists that this strategy would in fact improve biological efficiency. In this pilot experiment, an attempt was made to compare systems of optimum or maximum reproduction using the rat.

Navigating the Impact of Globalization on Bank Efficiency in China%Navigating the Impact of Globalization on Bank Efficiency in China

Institute of Scientific and Technical Information of China (English)

Fadzlan Sufian; Muzafar Shah Habibullah

2011-01-01

The paper provides for the first time empirical evidence on the impact of economic globalization on bank efficiency in a developing economy. Using the data envelopment analysis method, we compute the efficiency of the Chinese banking sector during 2000- 2002 The empirical findings suggest that the inefficiency of the Chinese banking sector stems largely from scale rather than pure technical inefficiencies. Examining different components of economic globalization, we find that greater economic integration through higher trade flows, cultural proximity and political globalization have significant andpositive influence on bank efficiency levels. The empirical findings suggest that liberalization （restrictions） of the capital account exerts a negative （positive） influence on bank efficiency levels in China.

Loads of green washing—can behavioural economics increase willingness-to-pay for efficient washing machines in the UK?

International Nuclear Information System (INIS)

Bull, Joe

2012-01-01

The EU energy efficiency labelling scheme has successfully increased demand for efficient appliances by providing a prominent letter rating to consumers during their product search. Behavioural economics (BE) suggests the adoption of efficient appliances could be accelerated further by: (i) monetising efficiency, (ii) directly communicating the link between efficiency and carbon emissions, (iii) communicating the long-term (e.g., operational life) financial and environmental impact of product choices, and, (iv) framing the information as avoided losses (‘extra’) rather than gains (‘savings’). This study tested these hypotheses via an online, stated preference survey of 465 UK residents using actual market pricing and efficiency data for washing machines. The provision of information about either running costs or running emissions did encourage selection of more expensive and efficient products (strongly correlated variables in the choice set and actual market) (p<.001, r=.30–.41) with no statistically significant difference between their impact. Providing lifetime running cost information also nudged respondents towards more expensive, efficient products than annual information (p=.006–.027, r=.15–.18). Finally, loss-framed running emissions information encouraged selection of more expensive, efficient products than gain-framed information (p<.05, r=.13–.16). The EU label is an impracticable means of communication, but digital communication channels (e.g., price comparison websites) may offer potential for inexpensive localisation and personalisation of the information. The results suggest that successful communication could benefit the private sector whilst making a contribution to reducing carbon emissions. - Highlights: ► 465 UK residents made a hypothetical washing machine purchase via an online survey. ► Respondents were exposed to either running cost or running emissions information. ► Running cost information increased willingness

Synthesis of dye-sensitized solar cells. Efficiency cells as a thickness of titanium dioxide

Directory of Open Access Journals (Sweden)

Szura Dominika

2017-01-01

Full Text Available Defying the influence of the thickness of TiO2 efficiency of dye-sensitized solar cell. It was confirmed that the compatibility of printed layers with the parameters closely related with the DSSC. It was found that the increase in thickness of the titanium dioxide layer, increases the distance between the electrodes, determined by the thickness of the Surlyn foil. With the rise of thickness of dyed layer of TiO2 established decrease in the value of its transmittance. Greatest transparency and aesthetic value obtained for photovoltaic modules with a single layer of titanium dioxide. The improved performance efficiency and preferred yields maximum power were noticed and exhibited by the cells covered with three layers of TiO2. It was established that the behaviour of economic efficiency in the production process, provides a range of cells with two layers of oxide, showing a similar performance and greater transparency.

The Texas space flight liability act and efficient regulation for the private commercial space flight era

Science.gov (United States)

Johnson, Christopher D.

2013-12-01

In the spring of 2011, the American state of Texas passed into law an act limiting the liability of commercial space flight entities. Under it, those companies would not be liable for space flight participant injuries, except in cases of intentional injury or injury proximately caused by the company's gross negligence. An analysis within the framework of international and national space law, but especially informed by the academic discipline of law and economics, discusses the incentives of all relevant parties and attempts to understand whether the law is economically "efficient" (allocating resources so as to yield maximum utility), and suited to further the development of the fledgling commercial suborbital tourism industry. Insights into the Texas law are applicable to other states hoping to foster commercial space tourism and considering space tourism related legislation.

Process configuration of Liquid-nitrogen Energy Storage System (LESS) for maximum turnaround efficiency

Science.gov (United States)

Dutta, Rohan; Ghosh, Parthasarathi; Chowdhury, Kanchan

2017-12-01

Diverse power generation sector requires energy storage due to penetration of variable renewable energy sources and use of CO2 capture plants with fossil fuel based power plants. Cryogenic energy storage being large-scale, decoupled system with capability of producing large power in the range of MWs is one of the options. The drawback of these systems is low turnaround efficiencies due to liquefaction processes being highly energy intensive. In this paper, the scopes of improving the turnaround efficiency of such a plant based on liquid Nitrogen were identified and some of them were addressed. A method using multiple stages of reheat and expansion was proposed for improved turnaround efficiency from 22% to 47% using four such stages in the cycle. The novelty here is the application of reheating in a cryogenic system and utilization of waste heat for that purpose. Based on the study, process conditions for a laboratory-scale setup were determined and presented here.