WorldWideScience

Sample records for maximum certificated operating

  1. Maximum power operation of interacting molecular motors

    DEFF Research Database (Denmark)

    Golubeva, Natalia; Imparato, Alberto

    2013-01-01

    , as compared to the non-interacting system, in a wide range of biologically compatible scenarios. We furthermore consider the case where the motor-motor interaction directly affects the internal chemical cycle and investigate the effect on the system dynamics and thermodynamics.......We study the mechanical and thermodynamic properties of different traffic models for kinesin which are relevant in biological and experimental contexts. We find that motor-motor interactions play a fundamental role by enhancing the thermodynamic efficiency at maximum power of the motors...

  2. 49 CFR 195.406 - Maximum operating pressure.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Maximum operating pressure. 195.406 Section 195.406 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS... HAZARDOUS LIQUIDS BY PIPELINE Operation and Maintenance § 195.406 Maximum operating pressure. (a) Except for...

  3. 76 FR 54528 - Standard Operating Procedures (SOP) of the Aircraft Certification Service (AIR) Process for the...

    Science.gov (United States)

    2011-09-01

    ...) of the Aircraft Certification Service (AIR) Process for the Sequencing of Certification and... on the Aircraft Certification Service (AIR) standard operating procedure (SOP) describing the process... comments on the SOP : AIR-100-001; Standard Operating Procedure--Aircraft Certification Service Project...

  4. Extending the maximum operation time of the MNSR reactor.

    Science.gov (United States)

    Dawahra, S; Khattab, K; Saba, G

    2016-09-01

    An effective modification to extend the maximum operation time of the Miniature Neutron Source Reactor (MNSR) to enhance the utilization of the reactor has been tested using the MCNP4C code. This modification consisted of inserting manually in each of the reactor inner irradiation tube a chain of three polyethylene-connected containers filled of water. The total height of the chain was 11.5cm. The replacement of the actual cadmium absorber with B(10) absorber was needed as well. The rest of the core structure materials and dimensions remained unchanged. A 3-D neutronic model with the new modifications was developed to compare the neutronic parameters of the old and modified cores. The results of the old and modified core excess reactivities (ρex) were: 3.954, 6.241 mk respectively. The maximum reactor operation times were: 428, 1025min and the safety reactivity factors were: 1.654 and 1.595 respectively. Therefore, a 139% increase in the maximum reactor operation time was noticed for the modified core. This increase enhanced the utilization of the MNSR reactor to conduct a long time irradiation of the unknown samples using the NAA technique and increase the amount of radioisotope production in the reactor. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Pipeline operators training and certification using thermohydraulic simulators

    Energy Technology Data Exchange (ETDEWEB)

    Barreto, Claudio V.; Plasencia C, Jose [Pontificia Universidade Catolica (PUC-Rio), Rio de Janeiro, RJ (Brazil). Nucleo de Simulacao Termohidraulica de Dutos (SIMDUT); Montalvao, Filipe; Costa, Luciano [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil)

    2009-07-01

    The continuous pipeline operators training and certification of the TRANSPETRO's Pipeline National Operations Control Center (CNCO) is an essential task aiming the efficiency and safety of the oil and derivatives transport operations through the Brazilian pipeline network. For this objective, a hydraulic simulator is considered an excellent tool that allows the creation of different operational scenarios for training the pipeline hydraulic behavior as well as for testing the operator's responses to normal and abnormal real time operational conditions. The hydraulic simulator is developed based on a pipeline simulation software that supplies the hydraulic responses normally acquired from the pipeline remote units in the field. The pipeline simulation software has a communication interface system that sends and receives data to the SCADA supervisory system database. Using the SCADA graphical interface to create and to customize human machine interfaces (HMI) from which the operator/instructor has total control of the pipeline/system and instrumentation by sending commands. Therefore, it is possible to have realistic training outside of the real production systems, while acquiring experience during training hours with the operation of a real pipeline. A pilot Project was initiated at TRANSPETRO - CNCO targeting to evaluate the hydraulic simulators advantages in pipeline operators training and certification programs. The first part of the project was the development of three simulators for different pipelines. The excellent results permitted the project expansion for a total of twenty different pipelines, being implemented in training programs for pipelines presently operated by CNCO as well as for the new ones that are being migrated. The main objective of this paper is to present an overview of the implementation process and the development of a training environment through a pipe simulation environment using commercial software. This paper also presents

  6. Maximum principles for boundary-degenerate linear parabolic differential operators

    OpenAIRE

    Feehan, Paul M. N.

    2013-01-01

    We develop weak and strong maximum principles for boundary-degenerate, linear, parabolic, second-order partial differential operators, $Lu := -u_t-\\tr(aD^2u)-\\langle b, Du\\rangle + cu$, with \\emph{partial} Dirichlet boundary conditions. The coefficient, $a(t,x)$, is assumed to vanish along a non-empty open subset, $\\mydirac_0!\\sQ$, called the \\emph{degenerate boundary portion}, of the parabolic boundary, $\\mydirac!\\sQ$, of the domain $\\sQ\\subset\\RR^{d+1}$, while $a(t,x)$ may be non-zero at po...

  7. Organizing and operating the green certificates market in Romania

    International Nuclear Information System (INIS)

    Jisa, Mihaela; Sandulescu, Alexandru; Stanciulescu, Georgeta; Stanciu, Nadina

    2006-01-01

    The promotion of electricity produced from renewable energy sources, RES, represents an imperative of the present period of time justified by the environment protection, the increasing of energy independence against the imports - through the diversification of energy supply sources - as well as economic and social reasons. The Directive 2001/77/EC of the European Parliament and the Council on the promotion of electricity produced from renewable energy sources in the internal electricity market represents the first step of European Union in complying with the Kyoto targets of reducing the greenhouse gases. Romania was one of the first EU candidate countries transposing the Directive 2001/77/EC provisions into its own legislation (see Governmental Decision - GD no. 443/2003 amended by GD no.958/2005). The indicative target for 2010 was fixed at 33%, representing the share of E-RES in the gross national electricity consumption. The contents of the paper is as follows: 1. Introduction; 2. Legal Framework; 2.1. Primary legislation on RES; 2.2. Secondary legislation on RES; 3. The E-RES Promotion system in Romania; 4. The Operation of green certificates market; 4.1. Setting up the mandatory quotas; 4.2. Qualify the E-RES; 4.3. Issuing the green certificates; 4.4. Trading the green certificates; 4.5. Competencies and attributions regarding the organisation and operation of the green certificates market; 4.6. The allocation of the money obtained from suppliers for non-purchased green certificates to fulfil the imposed mandatory quota; 5. The results of the GCs transactions on the centralized market; 6. Conclusion. The paper concludes by underlining that: - the legal framework of regulation is complete and it ensures the operating of promotion system of E-RES; - eighteen suppliers did not comply with their annual mandatory quota (752 green certificates); - the Romanian indicative target for 2010 regarding the share of E-RES in the gross national electricity consumption was

  8. Projection Operator: A Step Towards Certification of Adaptive Controllers

    Science.gov (United States)

    Larchev, Gregory V.; Campbell, Stefan F.; Kaneshige, John T.

    2010-01-01

    One of the major barriers to wider use of adaptive controllers in commercial aviation is the lack of appropriate certification procedures. In order to be certified by the Federal Aviation Administration (FAA), an aircraft controller is expected to meet a set of guidelines on functionality and reliability while not negatively impacting other systems or safety of aircraft operations. Due to their inherent time-variant and non-linear behavior, adaptive controllers cannot be certified via the metrics used for linear conventional controllers, such as gain and phase margin. Projection Operator is a robustness augmentation technique that bounds the output of a non-linear adaptive controller while conforming to the Lyapunov stability rules. It can also be used to limit the control authority of the adaptive component so that the said control authority can be arbitrarily close to that of a linear controller. In this paper we will present the results of applying the Projection Operator to a Model-Reference Adaptive Controller (MRAC), varying the amount of control authority, and comparing controller s performance and stability characteristics with those of a linear controller. We will also show how adjusting Projection Operator parameters can make it easier for the controller to satisfy the certification guidelines by enabling a tradeoff between controller s performance and robustness.

  9. Optimal operating conditions for maximum biogas production in anaerobic bioreactors

    International Nuclear Information System (INIS)

    Balmant, W.; Oliveira, B.H.; Mitchell, D.A.; Vargas, J.V.C.; Ordonez, J.C.

    2014-01-01

    The objective of this paper is to demonstrate the existence of optimal residence time and substrate inlet mass flow rate for maximum methane production through numerical simulations performed with a general transient mathematical model of an anaerobic biodigester introduced in this study. It is herein suggested a simplified model with only the most important reaction steps which are carried out by a single type of microorganisms following Monod kinetics. The mathematical model was developed for a well mixed reactor (CSTR – Continuous Stirred-Tank Reactor), considering three main reaction steps: acidogenesis, with a μ max of 8.64 day −1 and a K S of 250 mg/L, acetogenesis, with a μ max of 2.64 day −1 and a K S of 32 mg/L, and methanogenesis, with a μ max of 1.392 day −1 and a K S of 100 mg/L. The yield coefficients were 0.1-g-dry-cells/g-pollymeric compound for acidogenesis, 0.1-g-dry-cells/g-propionic acid and 0.1-g-dry-cells/g-butyric acid for acetogenesis and 0.1 g-dry-cells/g-acetic acid for methanogenesis. The model describes both the transient and the steady-state regime for several different biodigester design and operating conditions. After model experimental validation, a parametric analysis was performed. It was found that biogas production is strongly dependent on the input polymeric substrate and fermentable monomer concentrations, but fairly independent of the input propionic, acetic and butyric acid concentrations. An optimisation study was then conducted and optimal residence time and substrate inlet mass flow rate were found for maximum methane production. The optima found were very sharp, showing a sudden drop of methane mass flow rate variation from the observed maximum to zero, within a 20% range around the optimal operating parameters, which stresses the importance of their identification, no matter how complex the actual bioreactor design may be. The model is therefore expected to be a useful tool for simulation, design, control and

  10. 75 FR 6164 - New Pilot Certification Requirements for Air Carrier Operations

    Science.gov (United States)

    2010-02-08

    .... FAA-2010-0100; Notice No. 10-02] RIN 2120-AJ67 New Pilot Certification Requirements for Air Carrier... to regulations relating to the certification of pilots conducting domestic, flag, and supplemental... qualification requirements for commercial pilot certification are adequate for engaging in such operations. The...

  11. 78 FR 53025 - Pilot Certification and Qualification Requirements for Air Carrier Operations; Correction

    Science.gov (United States)

    2013-08-28

    ...-0100; Amdt. No. 141-17A] RIN 2120-AJ67 Pilot Certification and Qualification Requirements for Air... regulations to create new certification and qualification requirements for pilots in air carrier operations..., the FAA published a final rule entitled, ``Pilot Certification and Qualification Requirements for Air...

  12. 75 FR 39036 - Public Housing Assessment System (PHAS): Management Operations Certification

    Science.gov (United States)

    2010-07-07

    ... System (PHAS): Management Operations Certification AGENCY: Office of the Chief Information Officer, HUD... management operations. The information is used to assess the management performance of PHAs. DATES: Comments... following information: Title of Proposal: Public Housing Assessment System (PHAS): Management Operations...

  13. 78 FR 59981 - Proposed Revision to Physical Security-Standard Design Certification and Operating Reactors

    Science.gov (United States)

    2013-09-30

    ... Design Certification and Operating Reactors AGENCY: Nuclear Regulatory Commission. ACTION: Standard... Design Certification and Operating Reactors.'' The NRC seeks comments on the proposed revised section of... subject): Federal Rulemaking Web site: Go to http://www.regulations.gov and search for Docket ID NRC-2013...

  14. Maximum Flexibility: Enhancing the Operational Employment of High Speed Sealift

    National Research Council Canada - National Science Library

    Mulcahy, Francis S

    2004-01-01

    .... Already, the performance of the HSV-1X Joint Venture and similar ships during Operation Iraqi Freedom has made many stand up and take notice of the capabilities these vessels bring to the warfighter...

  15. 49 CFR 192.619 - Maximum allowable operating pressure: Steel or plastic pipelines.

    Science.gov (United States)

    2010-10-01

    ... plastic pipelines. 192.619 Section 192.619 Transportation Other Regulations Relating to Transportation... Operations § 192.619 Maximum allowable operating pressure: Steel or plastic pipelines. (a) No person may operate a segment of steel or plastic pipeline at a pressure that exceeds a maximum allowable operating...

  16. 78 FR 44873 - Pilot Certification and Qualification Requirements for Air Carrier Operations; Correction

    Science.gov (United States)

    2013-07-25

    ...-0100; Amdt. Nos. 61-130A] RIN 2120-AJ67 Pilot Certification and Qualification Requirements for Air... to create new certification and qualification requirements for pilots in air carrier operations. This... . SUPPLEMENTARY INFORMATION: Background On July 15, 2013, the FAA published a final rule entitled, ``Pilot...

  17. LANDFILL OPERATION FOR CARBON SEQUESTRATION AND MAXIMUM METHANE EMISSION CONTROL

    Energy Technology Data Exchange (ETDEWEB)

    Don Augenstein

    1999-01-11

    ''Conventional'' waste landfills emit methane, a potent greenhouse gas, in quantities such that landfill methane is a major factor in global climate change. Controlled landfilling is a novel approach to manage landfills for rapid completion of total gas generation, maximizing gas capture and minimizing emissions of methane to the atmosphere. With controlled landfilling, methane generation is accelerated and brought to much earlier completion by improving conditions for biological processes (principally moisture levels) in the landfill. Gas recovery efficiency approaches 100% through use of surface membrane cover over porous gas recovery layers operated at slight vacuum. A field demonstration project's results at the Yolo County Central Landfill near Davis, California are, to date, highly encouraging. Two major controlled landfilling benefits would be the reduction of landfill methane emissions to minuscule levels, and the recovery of greater amounts of landfill methane energy in much shorter times than with conventional landfill practice. With the large amount of US landfill methane generated, and greenhouse potency of methane, better landfill methane control can play a substantial role in reduction of US greenhouse gas emissions.

  18. Development, testing, and certification of Calmac Mfg. Corp. solar collector and solar operated pump

    Science.gov (United States)

    Parker, J. C.

    1979-01-01

    Development of a rubber tube solar collector and solar operated pump for use with solar heating and cooling systems is discussed. The development hardware, problems encountered during fabrication and testing, and certification statements of performance are included.

  19. 49 CFR 192.621 - Maximum allowable operating pressure: High-pressure distribution systems.

    Science.gov (United States)

    2010-10-01

    ... STANDARDS Operations § 192.621 Maximum allowable operating pressure: High-pressure distribution systems. (a) No person may operate a segment of a high pressure distribution system at a pressure that exceeds the... segment of a distribution system otherwise designed to operate at over 60 p.s.i. (414 kPa) gage, unless...

  20. Certificates.

    Science.gov (United States)

    Fry, F

    1994-06-01

    The Concise Oxford English Dictionary defines 'dilemma' as "an argument forcing one to choose one of two alternatives both unfavourable to him (or her)". This is situation that frequently confronts the general practitioner. In this article a personal solution to the problem of 'certificates' is presented. Not every one will necessarily agree with the solutions presented and some may find them unacceptable, or have better solutions. The author warmly welcomes correspondence, either personal, or in the form of Letters to the Editor, as this is a subject in which consensus decisions are important.

  1. 49 CFR 192.623 - Maximum and minimum allowable operating pressure; Low-pressure distribution systems.

    Science.gov (United States)

    2010-10-01

    ... distribution systems. (a) No person may operate a low-pressure distribution system at a pressure high enough to...) No person may operate a low pressure distribution system at a pressure lower than the minimum... 49 Transportation 3 2010-10-01 2010-10-01 false Maximum and minimum allowable operating pressure...

  2. 78 FR 69139 - Physical Security-Design Certification and Operating Reactors

    Science.gov (United States)

    2013-11-18

    ... Operating Reactors AGENCY: Nuclear Regulatory Commission. ACTION: Standard review plan--draft section..., ``Physical Security--Design Certification and Operating Reactors.'' The public comment period was originally....regulations.gov and search for Docket ID NRC-2013-0225. Address questions about NRC dockets to Carol Gallagher...

  3. Maximum principles for boundary-degenerate second-order linear elliptic differential operators

    OpenAIRE

    Feehan, Paul M. N.

    2012-01-01

    We prove weak and strong maximum principles, including a Hopf lemma, for smooth subsolutions to equations defined by linear, second-order, partial differential operators whose principal symbols vanish along a portion of the domain boundary. The boundary regularity property of the smooth subsolutions along this boundary vanishing locus ensures that these maximum principles hold irrespective of the sign of the Fichera function. Boundary conditions need only be prescribed on the complement in th...

  4. 75 FR 48329 - Tribal Drinking Water Operator Certification Program

    Science.gov (United States)

    2010-08-10

    ... operator has the skills, knowledge, education and experience necessary to deliver safe water supporting... demonstrates the operator has the skills, knowledge, education and experience necessary to deliver safe water... this program can be found at http://www.epa.gov/safewater/tribal.html . 2. Hard Copies. Hard copies of...

  5. Staffing, recruitment, training, qualification and certification of operating personnel of nuclear power plants

    International Nuclear Information System (INIS)

    1999-10-01

    Safety of public, occupational workers and the protection of environment should be assured while activities for economic and social progress are pursued. These activities include the establishment and utilisation of nuclear facilities and the use of radioactive sources. This safety guide provides guidance on the aspects of staffing, recruitment, training, qualification and certification of operating personnel of nuclear power plants

  6. 47 CFR 25.133 - Period of construction; certification of commencement of operation.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Period of construction; certification of commencement of operation. 25.133 Section 25.133 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS Applications and Licenses Earth Stations § 25.133 Period...

  7. Real time estimation of photovoltaic modules characteristics and its application to maximum power point operation

    Energy Technology Data Exchange (ETDEWEB)

    Garrigos, Ausias; Blanes, Jose M.; Carrasco, Jose A. [Area de Tecnologia Electronica, Universidad Miguel Hernandez de Elche, Avda. de la Universidad s/n, 03202 Elche, Alicante (Spain); Ejea, Juan B. [Departamento de Ingenieria Electronica, Universidad de Valencia, Avda. Dr Moliner 50, 46100 Valencia, Valencia (Spain)

    2007-05-15

    In this paper, an approximate curve fitting method for photovoltaic modules is presented. The operation is based on solving a simple solar cell electrical model by a microcontroller in real time. Only four voltage and current coordinates are needed to obtain the solar module parameters and set its operation at maximum power in any conditions of illumination and temperature. Despite its simplicity, this method is suitable for low cost real time applications, as control loop reference generator in photovoltaic maximum power point circuits. The theory that supports the estimator together with simulations and experimental results are presented. (author)

  8. Determining Maximum Photovoltaic Penetration in a Distribution Grid considering Grid Operation Limits

    DEFF Research Database (Denmark)

    Kordheili, Reza Ahmadi; Bak-Jensen, Birgitte; Pillai, Jayakrishnan Radhakrishna

    2014-01-01

    High penetration of photovoltaic panels in distribution grid can bring the grid to its operation limits. The main focus of the paper is to determine maximum photovoltaic penetration level in the grid. Three main criteria were investigated for determining maximum penetration level of PV panels...... for this grid: even distribution of PV panels, aggregation of panels at the beginning of each feeder, and aggregation of panels at the end of each feeder. Load modeling is done using Velander formula. Since PV generation is highest in the summer due to irradiation, a summer day was chosen to determine maximum......; maximum voltage deviation of customers, cables current limits, and transformer nominal value. Voltage deviation of different buses was investigated for different penetration levels. The proposed model was simulated on a Danish distribution grid. Three different PV location scenarios were investigated...

  9. 78 FR 26103 - Proposed Standard Operating Procedure (SOP) of the Aircraft Certification Service (AIR) Project...

    Science.gov (United States)

    2013-05-03

    ... data, views, or arguments to the above listed address. Please identify ``SOP: AIR-100-001 Standard... Certification Offices (ACOs). The certification programs include: Type certificate (TC), Amended Type Certificate (ATC), Supplemental Type Certificated ATC), Amended Supplemental Type Certificate (ASTC), and...

  10. 14 CFR 63.23 - Special purpose flight engineer and flight navigator certificates: Operation of U.S.-registered...

    Science.gov (United States)

    2010-01-01

    ... purpose flight engineer and flight navigator certificates: Operation of U.S.-registered civil airplanes... flight engineer or flight navigator duties on a civil airplane of U.S. registry, leased to a person not a... certificate holder is performing flight engineer or flight navigator duties on the U.S.-registered civil...

  11. Determination of the wind power systems load to achieve operation in the maximum energy area

    Science.gov (United States)

    Chioncel, C. P.; Tirian, G. O.; Spunei, E.; Gillich, N.

    2018-01-01

    This paper analyses the operation of the wind turbine, WT, in the maximum power point, MPP, by linking the load of the Permanent Magnet Synchronous Generator, PMSG, with the wind speed value. The load control methods at wind power systems aiming an optimum performance in terms of energy are based on the fact that the energy captured by the wind turbine significantly depends on the mechanical angular speed of the wind turbine. The presented control method consists in determining the optimal mechanical angular speed, ωOPTIM, using an auxiliary low power wind turbine, WTAUX, operating without load, at maximum angular velocity, ωMAX. The method relies on the fact that the ratio ωOPTIM/ωMAX has a constant value for a given wind turbine and does not depend on the time variation of the wind speed values.

  12. THE ACTIVITIES OF THE NATIONAL BANK OF UKRAINE ON THE OPEN MARKET: OPERATION WITH CERTIFICATES OF DEPOSITS

    Directory of Open Access Journals (Sweden)

    Yuliia Harkusha

    2016-06-01

    Full Text Available In the article investigated the activities of the National Bank of Ukraine on the open market. The analysis of operations of the National Bank of Ukraine banks to raise funds placing deposit certificates. Defined impact operations of the central bank's own debt securities to trading volumes deposit certificates of the National Bank of Ukraine on the stock market and the credit activity of banks. Identified problems interest rate policy and the ways to overcome them. Key words: National Bank of Ukraine, certificates of deposits, open market, interest rate policy, banks, stock exchange. JEL: E 58

  13. THE ACTIVITIES OF THE NATIONAL BANK OF UKRAINE ON THE OPEN MARKET: OPERATION WITH CERTIFICATES OF DEPOSITS

    OpenAIRE

    Yuliia Harkusha

    2016-01-01

    In the article investigated the activities of the National Bank of Ukraine on the open market. The analysis of operations of the National Bank of Ukraine banks to raise funds placing deposit certificates. Defined impact operations of the central bank's own debt securities to trading volumes deposit certificates of the National Bank of Ukraine on the stock market and the credit activity of banks. Identified problems interest rate policy and the ways to overcome them. Key words: National Bank o...

  14. 49 CFR 192.112 - Additional design requirements for steel pipe using alternative maximum allowable operating...

    Science.gov (United States)

    2010-10-01

    ... (incorporated by reference, see § 192.7); or (ii) American Society of Mechanical Engineers (ASME) B31.8.... Certification must address material properties such as chemistry, minimum yield strength and minimum wall...

  15. Operational forecasting of daily temperatures in the Valencia Region. Part I: maximum temperatures in summer.

    Science.gov (United States)

    Gómez, I.; Estrela, M.

    2009-09-01

    Extreme temperature events have a great impact on human society. Knowledge of summer maximum temperatures is very useful for both the general public and organisations whose workers have to operate in the open, e.g. railways, roadways, tourism, etc. Moreover, summer maximum daily temperatures are considered a parameter of interest and concern since persistent heat-waves can affect areas as diverse as public health, energy consumption, etc. Thus, an accurate forecasting of these temperatures could help to predict heat-wave conditions and permit the implementation of strategies aimed at minimizing the negative effects that high temperatures have on human health. The aim of this work is to evaluate the skill of the RAMS model in determining daily maximum temperatures during summer over the Valencia Region. For this, we have used the real-time configuration of this model currently running at the CEAM Foundation. To carry out the model verification process, we have analysed not only the global behaviour of the model for the whole Valencia Region, but also its behaviour for the individual stations distributed within this area. The study has been performed for the summer forecast period of 1 June - 30 September, 2007. The results obtained are encouraging and indicate a good agreement between the observed and simulated maximum temperatures. Moreover, the model captures quite well the temperatures in the extreme heat episodes. Acknowledgement. This work was supported by "GRACCIE" (CSD2007-00067, Programa Consolider-Ingenio 2010), by the Spanish Ministerio de Educación y Ciencia, contract number CGL2005-03386/CLI, and by the Regional Government of Valencia Conselleria de Sanitat, contract "Simulación de las olas de calor e invasiones de frío y su regionalización en la Comunidad Valenciana" ("Heat wave and cold invasion simulation and their regionalization at Valencia Region"). The CEAM Foundation is supported by the Generalitat Valenciana and BANCAIXA (Valencia, Spain).

  16. Near-maximum-power-point-operation (nMPPO) design of photovoltaic power generation system

    Energy Technology Data Exchange (ETDEWEB)

    Huang, B.J.; Sun, F.S.; Ho, R.W. [Department of Mechanical Engineering, National Taiwan University, Taipei 106, Taiwan (China)

    2006-08-15

    The present study proposes a PV system design, called 'near-maximum power-point-operation' (nMPPO) that can maintain the performance very close to PV system with MPPT (maximum-power-point tracking) but eliminate hardware of the MPPT. The concept of nMPPO is to match the design of battery bank voltage V{sub set} with the MPP (maximum-power point) of the PV module based on an analysis using meteorological data. Three design methods are used in the present study to determine the optimal V{sub set}. The analytical results show that nMPPO is feasible and the optimal V{sub set} falls in the range 13.2-15.0V for MSX60 PV module. The long-term performance simulation shows that the overall nMPPO efficiency {eta}{sub nMPPO} is higher than 94%. Two outdoor field tests were carried out in the present study to verify the design of nMPPO. The test results for a single PV module (60Wp) indicate that the nMPPO efficiency {eta}{sub nMPPO} is mostly higher than 93% at various PV temperature T{sub pv}. Another long-term field test of 1kWp PV array using nMPPO shows that the power generation using nMPPO is almost identical with MPPT at various weather conditions and T{sub pv} variation from 24{sup o}C to 70{sup o}C. (author)

  17. Maximum Potential Score (MPS: An operating model for a successful customer-focused strategy.

    Directory of Open Access Journals (Sweden)

    Cabello González, José Manuel

    2015-12-01

    Full Text Available One of marketers’ chief objectives is to achieve customer loyalty, which is a key factor for profitable growth. Therefore, they need to develop a strategy that attracts and maintains customers, giving them adequate motives, both tangible (prices and promotions and intangible (personalized service and treatment, to satisfy a customer and make him loyal to the company. Finding a way to accurately measure satisfaction and customer loyalty is very important. With regard to typical Relationship Marketing measures, we can consider listening to customers, which can help to achieve a competitive sustainable advantage. Customer satisfaction surveys are essential tools for listening to customers. Short questionnaires have gained considerable acceptance among marketers as a means to achieve a customer satisfaction measure. Our research provides an indication of the benefits of a short questionnaire (one/three questions. We find that the number of questions survey is significantly related to the participation in the survey (Net Promoter Score or NPS. We also prove that a the three question survey is more likely to have more participants than a traditional survey (Maximum Potential Score or MPS . Our main goal is to analyse one method as a potential predictor of customer loyalty. Using surveys, we attempt to empirically establish the causal factors in determining the satisfaction of customers. This paper describes a maximum potential operating model that captures with a three questions survey, important elements for a successful customer-focused strategy. MPS may give us lower participation rates than NPS but important information that helps to convert unhappy customers or just satisfied customers, into loyal customers.

  18. Increasing the maximum daily operation time of MNSR reactor by modifying its cooling system

    International Nuclear Information System (INIS)

    Khamis, I.; Hainoun, A.; Al Halbi, W.; Al Isa, S.

    2006-08-01

    thermal-hydraulic natural convection correlations have been formulated based on a thorough analysis and modeling of the MNSR reactor. The model considers detailed description of the thermal and hydraulic aspects of cooling in the core and vessel. In addition, determination of pressure drop was made through an elaborate balancing of the overall pressure drop in the core against the sum of all individual channel pressure drops employing an iterative scheme. Using this model, an accurate estimation of various timely core-averaged hydraulic parameters such as generated power, hydraulic diameters, flow cross area, ... etc. for each one of the ten-fuel circles in the core can be made. Furthermore, distribution of coolant and fuel temperatures, including maximum fuel temperature and its location in the core, can now be determined. Correlation among core-coolant average temperature, reactor power, and core-coolant inlet temperature, during both steady and transient cases, have been established and verified against experimental data. Simulating various operating condition of MNSR, good agreement is obtained for at different power levels. Various schemes of cooling have been investigated for the purpose of assessing potential benefits on the operational characteristics of the syrian MNSR reactor. A detailed thermal hydraulic model for the analysis of MNSR has been developed. The analysis shows that an auxiliary cooling system, for the reactor vessel or installed in the pool which surrounds the lower section of the reactor vessel, will significantly offset the consumption of excess reactivity due to the negative reactivity temperature coefficient. Hence, the maximum operating time of the reactor is extended. The model considers detailed description of the thermal and hydraulic aspects of cooling the core and its surrounding vessel. Natural convection correlations have been formulated based on a thorough analysis and modeling of the MNSR reactor. The suggested 'micro model

  19. Determination Of Maximum Power Of The RSG-Gas At Power Operation Mode Using One Line Cooling System

    International Nuclear Information System (INIS)

    Hastuti, Endiah Puji; Kuntoro, Iman; Darwis Isnaini, M.

    2000-01-01

    In the frame of minimizing the operation-cost, operation mode using one line cooling system is being evaluated. Maximum reactor power shall be determined to assure that the existing safety criteria are not violated. The analysis was done by means of a core thermal hydraulic code, COOLOD-N. The code solves core thermal hydraulic equation at steady state conditions. By varying the reactor power as the input, thermal hydraulic parameters such as fuel cladding and fuel meat temperatures as well as safety margin against flow instability were calculated. Imposing the safety criteria to the results, maximum permissible power for this operation was obtained as much as 17.1 MW. Nevertheless, for operation the maximum power is limited to 15MW

  20. 75 FR 41986 - Certification of Aircraft and Airmen for the Operation of Light-Sport Aircraft; Modifications to...

    Science.gov (United States)

    2010-07-20

    ...- Sport Aircraft; Modifications to Rules for Sport Pilots and Flight Instructors With a Sport Pilot Rating... rule; OMB approval of information collection. SUMMARY: This document announces the Office of Management... rule, ``Certification of Aircraft and Airmen for the Operation of Light-Sport Aircraft; Modifications...

  1. A Fire Safety Certification System for Board and Care Operators and Staff. SBIR Phase I: Final Report.

    Science.gov (United States)

    Walker, Bonnie L.

    This report describes the development and pilot testing of a fire safety certification system for board and care operators and staff who serve clients with developmental disabilities. During Phase 1, training materials were developed, including a trainer's manual, a participant's coursebook a videotape, an audiotape, and a pre-/post test which was…

  2. A performance analysis for MHD power cycles operating at maximum power density

    International Nuclear Information System (INIS)

    Sahin, Bahri; Kodal, Ali; Yavuz, Hasbi

    1996-01-01

    An analysis of the thermal efficiency of a magnetohydrodynamic (MHD) power cycle at maximum power density for a constant velocity type MHD generator has been carried out. The irreversibilities at the compressor and the MHD generator are taken into account. The results obtained from power density analysis were compared with those of maximum power analysis. It is shown that by using the power density criteria the MHD cycle efficiency can be increased effectively. (author)

  3. LANDFILL OPERATION FOR CARBON SEQUESTRATION AND MAXIMUM METHANE EMISSION CONTROL; FINAL

    International Nuclear Information System (INIS)

    Don Augenstein; Ramin Yazdani; Rick Moore; Michelle Byars; Jeff Kieffer; Professor Morton Barlaz; Rinav Mehta

    2000-01-01

    Controlled landfilling is an approach to manage solid waste landfills, so as to rapidly complete methane generation, while maximizing gas capture and minimizing the usual emissions of methane to the atmosphere. With controlled landfilling, methane generation is accelerated to more rapid and earlier completion to full potential by improving conditions (principally moisture, but also temperature) to optimize biological processes occurring within the landfill. Gas is contained through use of surface membrane cover. Gas is captured via porous layers, under the cover, operated at slight vacuum. A field demonstration project has been ongoing under NETL sponsorship for the past several years near Davis, CA. Results have been extremely encouraging. Two major benefits of the technology are reduction of landfill methane emissions to minuscule levels, and the recovery of greater amounts of landfill methane energy in much shorter times, more predictably, than with conventional landfill practice. With the large amount of US landfill methane generated, and greenhouse potency of methane, better landfill methane control can play a substantial role both in reduction of US greenhouse gas emissions and in US renewable energy. The work described in this report, to demonstrate and advance this technology, has used two demonstration-scale cells of size (8000 metric tons[tonnes]), sufficient to replicate many heat and compaction characteristics of larger ''full-scale'' landfills. An enhanced demonstration cell has received moisture supplementation to field capacity. This is the maximum moisture waste can hold while still limiting liquid drainage rate to minimal and safely manageable levels. The enhanced landfill module was compared to a parallel control landfill module receiving no moisture additions. Gas recovery has continued for a period of over 4 years. It is quite encouraging that the enhanced cell methane recovery has been close to 10-fold that experienced with conventional

  4. 78 FR 19164 - Amendments to Compliance Certification Content Requirements for State and Federal Operating...

    Science.gov (United States)

    2013-03-29

    ... sources to use credible evidence in compliance certifications. A review of a sample of recent part 71... title V contexts, the EPA has not previously devoted its limited resources to correcting the inadvertent..., representation, or certification in, or omits material information from, * * * any notice, application, record...

  5. 78 FR 45055 - Pilot Certification and Qualification Requirements for Air Carrier Operations

    Science.gov (United States)

    2013-07-26

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Parts 61, 121, 135, 141, and 142 [Docket No.: FAA-2010-0100; Amdt. Nos. 61-130; 121-365; 135-127; 141-1; 142-9] RIN 2120-AJ67 Pilot... a commercial pilot (1) An ATP certificate with certificate with an appropriate appropriate aircraft...

  6. A New Technique for Tracking the Global Maximum Power Point of PV Arrays Operating Under Partial-Shading Conditions

    DEFF Research Database (Denmark)

    Koutroulis, Eftichios; Blaabjerg, Frede

    2012-01-01

    The power-voltage characteristic of photovoltaic (PV) arrays operating under partial-shading conditions exhibits multiple local maximum power points (MPPs). In this paper, a new method to track the global MPP is presented, which is based on controlling a dc/dc converter connected at the PV array...

  7. Modeling and operation optimization of a proton exchange membrane fuel cell system for maximum efficiency

    International Nuclear Information System (INIS)

    Han, In-Su; Park, Sang-Kyun; Chung, Chang-Bock

    2016-01-01

    Highlights: • A proton exchange membrane fuel cell system is operationally optimized. • A constrained optimization problem is formulated to maximize fuel cell efficiency. • Empirical and semi-empirical models for most system components are developed. • Sensitivity analysis is performed to elucidate the effects of major operating variables. • The optimization results are verified by comparison with actual operation data. - Abstract: This paper presents an operation optimization method and demonstrates its application to a proton exchange membrane fuel cell system. A constrained optimization problem was formulated to maximize the efficiency of a fuel cell system by incorporating practical models derived from actual operations of the system. Empirical and semi-empirical models for most of the system components were developed based on artificial neural networks and semi-empirical equations. Prior to system optimizations, the developed models were validated by comparing simulation results with the measured ones. Moreover, sensitivity analyses were performed to elucidate the effects of major operating variables on the system efficiency under practical operating constraints. Then, the optimal operating conditions were sought at various system power loads. The optimization results revealed that the efficiency gaps between the worst and best operation conditions of the system could reach 1.2–5.5% depending on the power output range. To verify the optimization results, the optimal operating conditions were applied to the fuel cell system, and the measured results were compared with the expected optimal values. The discrepancies between the measured and expected values were found to be trivial, indicating that the proposed operation optimization method was quite successful for a substantial increase in the efficiency of the fuel cell system.

  8. Hierarchical Load Tracking Control of a Grid-Connected Solid Oxide Fuel Cell for Maximum Electrical Efficiency Operation

    Directory of Open Access Journals (Sweden)

    Yonghui Li

    2015-03-01

    Full Text Available Based on the benchmark solid oxide fuel cell (SOFC dynamic model for power system studies and the analysis of the SOFC operating conditions, the nonlinear programming (NLP optimization method was used to determine the maximum electrical efficiency of the grid-connected SOFC subject to the constraints of fuel utilization factor, stack temperature and output active power. The optimal operating conditions of the grid-connected SOFC were obtained by solving the NLP problem considering the power consumed by the air compressor. With the optimal operating conditions of the SOFC for the maximum efficiency operation obtained at different active power output levels, a hierarchical load tracking control scheme for the grid-connected SOFC was proposed to realize the maximum electrical efficiency operation with the stack temperature bounded. The hierarchical control scheme consists of a fast active power control and a slower stack temperature control. The active power control was developed by using a decentralized control method. The efficiency of the proposed hierarchical control scheme was demonstrated by case studies using the benchmark SOFC dynamic model.

  9. On Integrating Unmanned Aircraft Systems into the National Airspace System Issues, Challenges, Operational Restrictions, Certification, and Recommendations

    CERN Document Server

    Dalamagkidis, Konstantinos; Piegl, Les A

    2012-01-01

    This book presents, in a comprehensive way, current unmanned aviation regulation, airworthiness certification, special aircraft categories, pilot certification, federal aviation requirements, operation rules, airspace classes and regulation development models. It discusses unmanned aircraft systems levels of safety derived mathematically based on the corresponding levels for manned aviation. It provides an overview of the history and current status of UAS airworthiness and operational regulation worldwide. Existing regulations have been developed considering the need for a complete regulatory framework for UAS. It focuses on UAS safety assessment and functional requirements, achieved in terms of defining an “Equivalent Level of Safety”, or ELOS, with that of manned aviation, specifying what the ELOS requirement entails for UAS regulations. To accomplish this, the safety performance of manned aviation is first evaluated, followed by a novel model to derive reliability requirements for achieving target lev...

  10. Hierarchical Load Tracking Control of a Grid-connected Solid Oxide Fuel Cell for Maximum Electrical Efficiency Operation

    DEFF Research Database (Denmark)

    Li, Yonghui; Wu, Qiuwei; Zhu, Haiyu

    2015-01-01

    efficiency operation obtained at different active power output levels, a hierarchical load tracking control scheme for the grid-connected SOFC was proposed to realize the maximum electrical efficiency operation with the stack temperature bounded. The hierarchical control scheme consists of a fast active...... power control and a slower stack temperature control. The active power control was developed by using a decentralized control method. The efficiency of the proposed hierarchical control scheme was demonstrated by case studies using the benchmark SOFC dynamic model......Based on the benchmark solid oxide fuel cell (SOFC) dynamic model for power system studies and the analysis of the SOFC operating conditions, the nonlinear programming (NLP) optimization method was used to determine the maximum electrical efficiency of the grid-connected SOFC subject...

  11. Safety analysis of RA reactor operation, I-III, Part III - Environmental effect of the maximum credible accident

    International Nuclear Information System (INIS)

    Raisic, N.

    1963-02-01

    Maximum credible accident at the RA reactor would consider release of fission products into the environment. This would result from fuel elements failure or meltdown due to loss of coolant. The analysis presented in this report assumes that the reactor was operating at nominal power at the moment of maximum possible accident. The report includes calculations of fission products activity at the moment of accident, total activity release during the accident, concentration of radioactive material in the air in the reactor neighbourhood, and the analysis of accident environmental effects

  12. 49 CFR 192.620 - Alternative maximum allowable operating pressure for certain steel pipelines.

    Science.gov (United States)

    2010-10-01

    ... (SCADA) system, other leak detection system, or an alternative method of control. (iii) Remote valve... outs, leakage, or other activities or conditions affecting the safety operation of the pipeline. (ii... requirements of § 192.707(d) except in agricultural areas, large water crossings or swamp, steep terrain, or...

  13. Multicore PSO Operation for Maximum Power Point Tracking of a Distributed Photovoltaic System under Partially Shading Condition

    Directory of Open Access Journals (Sweden)

    Ru-Min Chao

    2016-01-01

    Full Text Available This paper identifies the partial shading problem of a PV module using the one-diode model and simulating the characteristics exhibiting multiple-peak power output condition that is similar to a PV array. A modified particle swarm optimization (PSO algorithm based on the suggested search-agent deployment, retracking condition, and multicore operation is proposed in order to continuously locate the global maximum power point for the PV system. Partial shading simulation results for up to 16 modules in series/parallel formats are presented. A distributed PV system consisting of up to 8 a-silicon thin film PV panels and also having a dedicated DC/DC buck converter on each of the modules is tested. The converter reaches its steady state voltage output in 10 ms. However for MPPT operation, voltage, and current measurement interval is set to 20 ms to avoid unnecessary noise from the entire electric circuit. Based on the simulation and experiment results, each core of the proposed PSO operation should control no more than 4 PV modules in order to have the maximum tracking accuracy and minimum overall tracking time. Tracking for the global maximum power point of a distributed PV system under various partial shading conditions can be done within 1.3 seconds.

  14. Climate certificates

    International Nuclear Information System (INIS)

    1998-10-01

    Reduced emissions of climate gases at the lowest cost require international cooperation in order to ensure that the most cost-efficient measures are taken. A market for emission rights is one way of achieving this. However, creating the right conditions for such a market to operate requires an unambiguous definition of the product to be traded. In this PM, the Swedish Power Association sketches out how such a product could be defined, and how a market for the resulting unambiguously defined product could be operated internationally, in parallel with other markets for energy products. Trade in climate certificates could become a joint EU approach to achieving common results within the field of climate policy. The main features of the proposal are as follows: Electricity producers would be allowed to issue climate certificates for electricity produced without climate-affecting emissions, e.g. in wind power plants. 1 kWh of electricity produced without emissions would entitle the utility to issue a climate certificate for 1 kWh. Electricity from power stations having low emissions, e.g. modern natural gas-fired plants, would entitle the utility to issue certificates in proportion to how much lower their emissions were in comparison with those from conventional coal-fired power stations. The number of certificates would be reduced by an individual coefficient, related directly to the quantity of climate-affecting emissions from the plant concerned. They would be traded and noted on markets in the various member countries. The certificates would not be nationally restricted, but could be traded across borders. Exchanges would be authorised by national authorities, in accordance with overall EU directives. These authorised exchanges would act as certification bodies, checking that certificates had been properly issued in accordance with a corresponding volume of electricity production. Electricity and certificates could be purchased from different suppliers. The

  15. Cavern disposal concepts for HLW/SF: assuring operational practicality and safety with maximum programme flexibility

    International Nuclear Information System (INIS)

    McKinley, Ian G.; Apted, Mick; Umeki, Hiroyuki; Kawamura, Hideki

    2008-01-01

    Most conventional engineered barrier system (EBS) designs for HLW/SF repositories are based on concepts developed in the 1970s and 1980s that assured feasibility with high margins of safety, in order to convince national decision makers to proceed with geological disposal despite technological uncertainties. In the interval since the advent of such 'feasibility designs', significant progress has been made in reducing technological uncertainties, which has lead to a growing awareness of other, equally important uncertainties in operational implementation and challenges regarding social acceptance in many new, emerging national repository programs. As indicated by the NUMO repository concept catalogue study (NUMO, 2004), there are advantages in reassessing how previous designs can be modified and optimised in the light of improved system understanding, allowing a robust EBS to be flexibly implemented to meet nation-specific and site-specific conditions. Full-scale emplacement demonstrations, particularly those carried out underground, have highlighted many of the practical issues to be addressed; e.g., handling of compacted bentonite in humid conditions, use of concrete for support infrastructure, remote handling of heavy radioactive packages in confined conditions, quality inspection, monitoring / ease of retrieval of emplaced packages and institutional control. The CAvern REtrievable (CARE) concept reduces or avoids such issues by emplacement of HLW or SF within multi-purpose transportation / storage / disposal casks in large ventilated caverns at a depth of several hundred metres. The facility allows the caverns to serve as inspectable stores for an extended period of time (up to a few hundred years) until a decision is made to close them. At this point the caverns are backfilled and sealed as a final repository, effectively with the same safety case components as conventional 'feasibility designs'. In terms of operational practicality an d safety, the CARE

  16. DOE/RL Hanford Site Air Operating Permit Annual Compliance Certification Report for the Period July 2 2001 through December 31 2001 [SEC 1 & 2

    Energy Technology Data Exchange (ETDEWEB)

    GREEN, W.E.

    2002-05-22

    The Hanford Site Air Operating Permit (AOP), Number 00-05-006, became effective on July 2, 2001. The AOP, Section 4.3.4, ''Annual Compliance Certification'', requires submittal of an annual compliance certification report no later than 12 months following the effective date of the permit. This report is to be certified for truth, accuracy, and completeness by a Responsible Official. This first annual compliance certification report contains information for the period from July 2, 2001 through December 31, 2001. Hereafter, the annual compliance certification report will contain information for the period from January 1 through December 31, as required by the AOP Section 4.3, ''Submittals''. Copies of the annual compliance certification reports are transmitted to the Washington State Department of Ecology (Ecology), the Washington State Department of Health (WDOH), the Benton Clean Air Authority (BCAA), and the U.S. Environmental Protection Agency (EPA), Region 10. For the applicable reporting period, Section 4.3.3, ''Annual Compliance Certification'', requires the following content for the annual compliance certification report: (1) The identification of each term or condition of the permit that is the basis of the certification; (2) The compliance status; (3) Whether compliance was continuous or intermittent; (4) The method(s) used to determine the compliance status of the source over the reporting period consistent with Washington Administrative Code (WAC) 173401 -61 5(3)(a); and (5) Such other facts as Ecology, WDOH, or BCAA might be required to determine the compliance status of the source. According to WAC 173-401-630(5), no certification is required for insignificant emission units. The specific terms and conditions for this annual compliance certification report consist of all emission point specific terms and conditions contained in the AOP Attachment 1 and Attachment 2 tables, plus Attachment 3 for

  17. DOE/RL Hanford Site Air Operating Permit Annual Compliance Certification Report for the Period July 2 2001 through December 31 2001 [SEC 1 and 2

    International Nuclear Information System (INIS)

    GREEN, W.E.

    2002-01-01

    The Hanford Site Air Operating Permit (AOP), Number 00-05-006, became effective on July 2, 2001. The AOP, Section 4.3.4, ''Annual Compliance Certification'', requires submittal of an annual compliance certification report no later than 12 months following the effective date of the permit. This report is to be certified for truth, accuracy, and completeness by a Responsible Official. This first annual compliance certification report contains information for the period from July 2, 2001 through December 31, 2001. Hereafter, the annual compliance certification report will contain information for the period from January 1 through December 31, as required by the AOP Section 4.3, ''Submittals''. Copies of the annual compliance certification reports are transmitted to the Washington State Department of Ecology (Ecology), the Washington State Department of Health (WDOH), the Benton Clean Air Authority (BCAA), and the U.S. Environmental Protection Agency (EPA), Region 10. For the applicable reporting period, Section 4.3.3, ''Annual Compliance Certification'', requires the following content for the annual compliance certification report: (1) The identification of each term or condition of the permit that is the basis of the certification; (2) The compliance status; (3) Whether compliance was continuous or intermittent; (4) The method(s) used to determine the compliance status of the source over the reporting period consistent with Washington Administrative Code (WAC) 173401 -61 5(3)(a); and (5) Such other facts as Ecology, WDOH, or BCAA might be required to determine the compliance status of the source. According to WAC 173-401-630(5), no certification is required for insignificant emission units. The specific terms and conditions for this annual compliance certification report consist of all emission point specific terms and conditions contained in the AOP Attachment 1 and Attachment 2 tables, plus Attachment 3 for asbestos and open burning

  18. Training and certification program of the operating staff for a 90-day test of a regenerative life support system

    Science.gov (United States)

    1972-01-01

    Prior to beginning a 90-day test of a regenerative life support system, a need was identified for a training and certification program to qualify an operating staff for conducting the test. The staff was responsible for operating and maintaining the test facility, monitoring and ensuring crew safety, and implementing procedures to ensure effective mission performance with good data collection and analysis. The training program was designed to ensure that each operating staff member was capable of performing his assigned function and was sufficiently cross-trained to serve at certain other positions on a contingency basis. Complicating the training program were budget and schedule limitations, and the high level of sophistication of test systems.

  19. Royal Order of 13 May 1980 fixing the maximum amount of liability of the operator for damage caused by a nuclear incident

    International Nuclear Information System (INIS)

    1980-01-01

    The purpose of this Order is to raise the maximum liability of the nuclear operator to one milliard Belgium francs per nuclear incident. This measure was taken with a view to keeping the operator's maximum liability at least at a constant value. (NEA) [fr

  20. 7 CFR 205.404 - Granting certification.

    Science.gov (United States)

    2010-01-01

    ... PROVISIONS NATIONAL ORGANIC PROGRAM Certification § 205.404 Granting certification. (a) Within a reasonable... certified operation; (2) Effective date of certification; (3) Categories of organic operation, including... operation's organic certification continues in effect until surrendered by the organic operation or...

  1. Maximum likelihood estimation of dose-response parameters for therapeutic operating characteristic (TOC) analysis of carcinoma of the nasopharynx

    International Nuclear Information System (INIS)

    Metz, C.E.; Tokars, R.P.; Kronman, H.B.; Griem, M.L.

    1982-01-01

    A Therapeutic Operating Characteristic (TOC) curve for radiation therapy plots, for all possible treatment doses, the probability of tumor ablation as a function of the probability of radiation-induced complication. Application of this analysis to actual therapeutic situation requires that dose-response curves for ablation and for complication be estimated from clinical data. We describe an approach in which ''maximum likelihood estimates'' of these dose-response curves are made, and we apply this approach to data collected on responses to radiotherapy for carcinoma of the nasopharynx. TOC curves constructed from the estimated dose-response curves are subject to moderately large uncertainties because of the limitations of available data.These TOC curves suggest, however, that treatment doses greater than 1800 rem may substantially increase the probability of tumor ablation with little increase in the risk of radiation-induced cervical myelopathy, especially for T1 and T2 tumors

  2. Modeling of a green certificate market

    International Nuclear Information System (INIS)

    Marchenko, O.V.

    2008-01-01

    The paper considers one of the economic mechanisms, stimulating the introduction of renewable energy sources (RES) - a green certificate market. A mathematical model was developed to describe a supply and demand balance in the electricity and green certificate markets simultaneously. The sellers of certificates are RES owners, who obtain certificates for each unit of electricity produced, and the buyers are consumers, who are obliged by law to buy a certain share of this electricity. Equilibrium structures of the power system including RES with stochastic operation conditions are calculated. The prices of electricity and certificates, as well as the total economic effect of the system are determined taking into account external costs (environmental damages). The paper shows that a mechanism of green certificates is not an ideal means for minimizing the impact of energy on the environment: the economic effect turns out to be smaller than the maximum possible one. However, this deviation is relatively small, therefore the green certificate market allows the external effects to be partially taken into account. Such a market creates incentives for investors, electricity producers and consumers to make power sources mix, modes of electricity production and consumption closer to the optimum ones in terms of the economy as a whole. (author)

  3. Flying Fast and High: Operational Flight Planning for Maximum Data Return for Airborne Snow Observatory Mountain Surveys

    Science.gov (United States)

    Berisford, D. F.; Painter, T. H.; Richardson, M.; Wallach, A.; Deems, J. S.; Bormann, K. J.

    2017-12-01

    The Airborne Snow Observatory (ASO - http://aso.jpl.nasa.gov) uses an airborne laser scanner to map snow depth, and imaging spectroscopy to map snow albedo in order to estimate snow water equivalent and melt rate over mountainous, hydrologic basin-scale areas. Optimization of planned flight lines requires the balancing of many competing factors, including flying altitude and speed, bank angle limitation, laser pulse rate and power level, flightline orientation relative to terrain, surface optical properties, and data output requirements. These variables generally distill down to cost vs. higher resolution data. The large terrain elevation variation encountered in mountainous terrain introduces the challenge of narrow swath widths over the ridgetops, which drive tight flightline spacing and possible dropouts over the valleys due to maximum laser range. Many of the basins flown by ASO exceed 3,000m of elevation relief, exacerbating this problem. Additionally, sun angle may drive flightline orientations for higher-quality spectrometer data, which may change depending on time of day. Here we present data from several ASO missions, both operational and experimental, showing the lidar performance and accuracy limitations for a variety of operating parameters. We also discuss flightline planning strategies to maximize data density return per dollar, and a brief analysis on the effect of short turn times/steep bank angles on GPS position accuracy.

  4. Maximum Exergetic Efficiency Operation of a Solar Powered H2O-LiBr Absorption Cooling System

    Directory of Open Access Journals (Sweden)

    Camelia Stanciu

    2017-12-01

    Full Text Available A solar driven cooling system consisting of a single effect H2O-LiBr absorbtion cooling module (ACS, a parabolic trough collector (PTC, and a storage tank (ST module is analyzed during one full day operation. The pressurized water is used to transfer heat from PTC to ST and to feed the ACS desorber. The system is constrained to operate at the maximum ACS exergetic efficiency, under a time dependent cooling load computed on 15 July for a one storey house located near Bucharest, Romania. To set up the solar assembly, two commercial PTCs were selected, namely PT1-IST and PTC 1800 Solitem, and a single unit ST was initially considered. The mathematical model, relying on the energy balance equations, was coded under Engineering Equation Solver (EES environment. The solar data were obtained from the Meteonorm database. The numerical simulations proved that the system cannot cover the imposed cooling load all day long, due to the large variation of water temperature inside the ST. By splitting the ST into two units, the results revealed that the PT1-IST collector only drives the ACS between 9 am and 4:30 pm, while the PTC 1800 one covers the entire cooling period (9 am–6 pm for optimum ST capacities of 90 kg/90 kg and 90 kg/140 kg, respectively.

  5. Guide to the selection, training, and licensing or certification of reprocessing plant operators. Volume I

    International Nuclear Information System (INIS)

    1976-06-01

    The Code of Federal Regulations, Title 10, Part 55, establishes procedures and criteria for the licensing of operators, including senior operators, in ''Production and Utilization Facilities'', which includes plants for reprocessing irradiated fuel. A training guide is presented which will facilitate the licensing of operators for nuclear reprocessing plants by offering generalized descriptions of the basic principles (theory) and the unit operations (mechanics) employed in reprocessing spent fuels. In the present volume, details about the portions of a training program that are of major interest to management are presented

  6. Guide to the selection, training, and licensing or certification of reprocessing plant operators. Volume I

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-06-01

    The Code of Federal Regulations, Title 10, Part 55, establishes procedures and criteria for the licensing of operators, including senior operators, in ''Production and Utilization Facilities'', which includes plants for reprocessing irradiated fuel. A training guide is presented which will facilitate the licensing of operators for nuclear reprocessing plants by offering generalized descriptions of the basic principles (theory) and the unit operations (mechanics) employed in reprocessing spent fuels. In the present volume, details about the portions of a training program that are of major interest to management are presented. (JSR)

  7. An Improved Surface Simplification Method for Facial Expression Animation Based on Homogeneous Coordinate Transformation Matrix and Maximum Shape Operator

    Directory of Open Access Journals (Sweden)

    Juin-Ling Tseng

    2016-01-01

    Full Text Available Facial animation is one of the most popular 3D animation topics researched in recent years. However, when using facial animation, a 3D facial animation model has to be stored. This 3D facial animation model requires many triangles to accurately describe and demonstrate facial expression animation because the face often presents a number of different expressions. Consequently, the costs associated with facial animation have increased rapidly. In an effort to reduce storage costs, researchers have sought to simplify 3D animation models using techniques such as Deformation Sensitive Decimation and Feature Edge Quadric. The studies conducted have examined the problems in the homogeneity of the local coordinate system between different expression models and in the retainment of simplified model characteristics. This paper proposes a method that applies Homogeneous Coordinate Transformation Matrix to solve the problem of homogeneity of the local coordinate system and Maximum Shape Operator to detect shape changes in facial animation so as to properly preserve the features of facial expressions. Further, root mean square error and perceived quality error are used to compare the errors generated by different simplification methods in experiments. Experimental results show that, compared with Deformation Sensitive Decimation and Feature Edge Quadric, our method can not only reduce the errors caused by simplification of facial animation, but also retain more facial features.

  8. ROC [Receiver Operating Characteristics] study of maximum likelihood estimator human brain image reconstructions in PET [Positron Emission Tomography] clinical practice

    International Nuclear Information System (INIS)

    Llacer, J.; Veklerov, E.; Nolan, D.; Grafton, S.T.; Mazziotta, J.C.; Hawkins, R.A.; Hoh, C.K.; Hoffman, E.J.

    1990-10-01

    This paper will report on the progress to date in carrying out Receiver Operating Characteristics (ROC) studies comparing Maximum Likelihood Estimator (MLE) and Filtered Backprojection (FBP) reconstructions of normal and abnormal human brain PET data in a clinical setting. A previous statistical study of reconstructions of the Hoffman brain phantom with real data indicated that the pixel-to-pixel standard deviation in feasible MLE images is approximately proportional to the square root of the number of counts in a region, as opposed to a standard deviation which is high and largely independent of the number of counts in FBP. A preliminary ROC study carried out with 10 non-medical observers performing a relatively simple detectability task indicates that, for the majority of observers, lower standard deviation translates itself into a statistically significant detectability advantage in MLE reconstructions. The initial results of ongoing tests with four experienced neurologists/nuclear medicine physicians are presented. Normal cases of 18 F -- fluorodeoxyglucose (FDG) cerebral metabolism studies and abnormal cases in which a variety of lesions have been introduced into normal data sets have been evaluated. We report on the results of reading the reconstructions of 90 data sets, each corresponding to a single brain slice. It has become apparent that the design of the study based on reading single brain slices is too insensitive and we propose a variation based on reading three consecutive slices at a time, rating only the center slice. 9 refs., 2 figs., 1 tab

  9. 78 FR 42323 - Pilot Certification and Qualification Requirements for Air Carrier Operations

    Science.gov (United States)

    2013-07-15

    ... leadership, professionalism, and mentoring skills, stabilized approaches, and operations in icing conditions... leadership, professionalism, and first officer assertiveness (Recommendation A-10- 15 and A-11-39); Require... fundamentals of instruction. [[Page 42331

  10. SFO Certification: Recognizing High Standards for Managers of School Business Operations Today

    Science.gov (United States)

    Statz, Bambi; Weber, Pam

    2010-01-01

    These are challenging times for schools across the United States and Canada, and the ability of those providing the fiscal leadership of these multi-million dollar organizations has never been more critical. There is no better time to identify the specific skills and knowledge needed by those managing the business operations of schools today, and…

  11. 77 FR 12373 - Pilot Certification and Qualification Requirements for Air Carrier Operations

    Science.gov (United States)

    2012-02-29

    ... techniques, high speed and high altitude programming of automatic flight control systems, transport aircraft... in an air multiengine time). carrier operational environment. (216). Aircraft type rating for the... rating exposes the pilot to an advanced multiengine aircraft and a multicrew environment. The FAA...

  12. Professional Certification

    Science.gov (United States)

    WaterSense recognizes certification programs for irrigation professionals that meet the specification criteria. Certification programs cover three areas: irrigation system design, installation and maintenance, and system auditing.

  13. Certification of the PSI request for the renewal of the operation license for the Hot Laboratory

    International Nuclear Information System (INIS)

    2014-03-01

    At the Paul Scherrer Institute (PSI), the Hot Laboratory was built in the years 1961 to 1963 in the former EIR in order to make scientific material analyses on highly radioactive material samples and to prepare diagnostic and therapeutically useful radioisotopes. The 1964 safety report with the request for the granting of the operational warrant was revised for the first time in 2004. Further safety reports and radiation protection plans were produced and accepted by the surveying authorities. The operational regulations were revised and approved on a yearly basis by the PSI direction. The regulations reflect the experience gained in 40 years of safe operation and take new regulations in nuclear energy legislation into account. In the years 2000-2002 the Hot Lab was refitted especially with respect to the fields of radiation and fire protection. Presently, the Hot Lab is used for applied material research on highly radioactive samples which mainly come from nuclear power plants, research reactors and the target stations of the PSI accelerator facilities. The investigations on highly radioactive samples and the handling of large quantities of radioisotopes include the possibility of incidents. The analysis of such incidents shows that the legal safety requirements are satisfied. The Swiss Federal Nuclear Safety Inspectorate (ENSI) requirements concerning the protection of personnel, population and environment, as well as the protection against fire, are fulfilled. In the Hot Lab the principle of barriers for the containment of radioactive materials is applied. Open radioactive sources are manipulated in depressurized cells. The air extracted from the cells is filtered before being released to the environment. In the building, the total amount of radioactive materials is limited in order to reduce the exposition of the population in normal operation as well as in case of incidents, and to avoid criticality accidents. Possible weaknesses in this concept can be shown

  14. Test Operations Procedure (TOP) 05-2-543 Enhanced Flight Termination Receiver (EFTR) Range Certification Testing

    Science.gov (United States)

    2011-07-25

    35 5.10 Signal Strength Telemetry Output ( SSTO ) (Test Number 10) ............ 38 5.11 Operational...All command outputs and monitor outputs shall respond properly. TOP 05-2-543 25 July 2011 38 5.10 Signal Strength Telemetry Output ( SSTO ...Test Number 10). a. Purpose. This test verifies that the signal strength telemetry output ( SSTO ) voltage is monotonic and directly related to the

  15. Energy saving certificates

    International Nuclear Information System (INIS)

    2005-11-01

    The French ministry of economy, finances and industry and the French agency of environment and energy mastery (Ademe) have organized on November 8, 2005, a colloquium for the presentation of the energy saving certificates, a new tool to oblige the energy suppliers to encourage their clients to make energy savings. This document gathers the transparencies presented at this colloquium about the following topics: state-of-the-art and presentation of the energy saving certificates system: presentation of the EEC system, presentation of the EEC standard operations; the energy saving certificates in Europe today: energy efficiency commitment in UK, Italian white certificate scheme, perspectives of the different European systems. (J.S.)

  16. 36 CFR 3.15 - What is the maximum noise level for the operation of a vessel?

    Science.gov (United States)

    2010-07-01

    ... level for the operation of a vessel? 3.15 Section 3.15 Parks, Forests, and Public Property NATIONAL PARK... level for the operation of a vessel? (a) A person may not operate a vessel at a noise level exceeding... vessel is being operated in excess of the noise levels established in paragraph (a) of this section may...

  17. Simulation and analysis of an isolated full-bridge DC/DC boost converter operating with a modified perturb and observe maximum power point tracking algorithm

    Directory of Open Access Journals (Sweden)

    Calebe A. Matias

    2017-07-01

    Full Text Available The purpose of the present study is to simulate and analyze an isolated full-bridge DC/DC boost converter, for photovoltaic panels, running a modified perturb and observe maximum power point tracking method. The zero voltage switching technique was used in order to minimize the losses of the converter for a wide range of solar operation. The efficiency of the power transfer is higher than 90% for large solar operating points. The panel enhancement due to the maximum power point tracking algorithm is 5.06%.

  18. FAA aircraft certification human factors and operations checklist for standalone GPS receivers (TSO C129 Class A)

    Science.gov (United States)

    1995-04-01

    This document is a checklist designed to assist Federal Aviation Administration(FAA) certification personnel and global : positioning system (GPS) receiver manufacturers in the evaluation of the pilot-system interface characteristlcs of GPS : recieve...

  19. Influence of phase separation on the anaerobic digestion of glucose: maximum COD turnover rate during continuous operation

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, A; Van Andel, J G; Breure, A M; Van Deursen, A

    1980-01-01

    A mineral medium containing 1% of glucose as the main carbon source was subjected to one-phase and two-phase anaerobic digestion processes under comparable conditions. The one-phase system combined acidogenic and methanogenic populations allowing a complete conversion of the carbon source into gaseous end products and biomass. The two-phase system consists of an acid reactor and a methane reactor connected in series allowing sequential acidogenesis and methanogenesis. Performance of the one-phase system is compared with that of the two-phase system. Maximum turnover of COD was determined for each system. Maximum specific sludge loading of the two-phase system was more than three times higher than that of the one-phase system. Effects of overloading each system were determined. The eco-physiological significance of phase separation is discussed briefly. (2 diagrams, 5 graphs, 41 references, 5 tables)

  20. Diluted Operation of a Heavy-Duty Natural Gas Engine - Aiming at Improved Effciency, Emission and Maximum Load

    OpenAIRE

    Kaiadi, Mehrzad

    2011-01-01

    Most heavy-duty engines are diesel operated. Severe emission regulations, high fuel prices, high technology costs (e.g. catalysts, fuel injection systems) and unsustainably in supplying fuel are enough reasons to convenience engine developers to explore alternative technologies or fuels. Using natural gas/biogas can be a very good alternative due to the attractive fuel properties regarding emission reduction and engine operation. Heavy-duty diesel engines can be easily converted for natur...

  1. 14 CFR 125.221 - Icing conditions: Operating limitations.

    Science.gov (United States)

    2010-01-01

    ... appendix C of this part or those for transport category airplane type certification, no pilot may fly— (1... pilot may fly an airplane into known or forecast severe icing conditions. (e) If current weather reports... CERTIFICATION AND OPERATIONS: AIRPLANES HAVING A SEATING CAPACITY OF 20 OR MORE PASSENGERS OR A MAXIMUM PAYLOAD...

  2. Random Forest-Based Approach for Maximum Power Point Tracking of Photovoltaic Systems Operating under Actual Environmental Conditions

    Directory of Open Access Journals (Sweden)

    Hussain Shareef

    2017-01-01

    Full Text Available Many maximum power point tracking (MPPT algorithms have been developed in recent years to maximize the produced PV energy. These algorithms are not sufficiently robust because of fast-changing environmental conditions, efficiency, accuracy at steady-state value, and dynamics of the tracking algorithm. Thus, this paper proposes a new random forest (RF model to improve MPPT performance. The RF model has the ability to capture the nonlinear association of patterns between predictors, such as irradiance and temperature, to determine accurate maximum power point. A RF-based tracker is designed for 25 SolarTIFSTF-120P6 PV modules, with the capacity of 3 kW peak using two high-speed sensors. For this purpose, a complete PV system is modeled using 300,000 data samples and simulated using the MATLAB/SIMULINK package. The proposed RF-based MPPT is then tested under actual environmental conditions for 24 days to validate the accuracy and dynamic response. The response of the RF-based MPPT model is also compared with that of the artificial neural network and adaptive neurofuzzy inference system algorithms for further validation. The results show that the proposed MPPT technique gives significant improvement compared with that of other techniques. In addition, the RF model passes the Bland–Altman test, with more than 95 percent acceptability.

  3. Random Forest-Based Approach for Maximum Power Point Tracking of Photovoltaic Systems Operating under Actual Environmental Conditions.

    Science.gov (United States)

    Shareef, Hussain; Mutlag, Ammar Hussein; Mohamed, Azah

    2017-01-01

    Many maximum power point tracking (MPPT) algorithms have been developed in recent years to maximize the produced PV energy. These algorithms are not sufficiently robust because of fast-changing environmental conditions, efficiency, accuracy at steady-state value, and dynamics of the tracking algorithm. Thus, this paper proposes a new random forest (RF) model to improve MPPT performance. The RF model has the ability to capture the nonlinear association of patterns between predictors, such as irradiance and temperature, to determine accurate maximum power point. A RF-based tracker is designed for 25 SolarTIFSTF-120P6 PV modules, with the capacity of 3 kW peak using two high-speed sensors. For this purpose, a complete PV system is modeled using 300,000 data samples and simulated using the MATLAB/SIMULINK package. The proposed RF-based MPPT is then tested under actual environmental conditions for 24 days to validate the accuracy and dynamic response. The response of the RF-based MPPT model is also compared with that of the artificial neural network and adaptive neurofuzzy inference system algorithms for further validation. The results show that the proposed MPPT technique gives significant improvement compared with that of other techniques. In addition, the RF model passes the Bland-Altman test, with more than 95 percent acceptability.

  4. Certification trails for data structures

    Science.gov (United States)

    Sullivan, Gregory F.; Masson, Gerald M.

    1993-01-01

    Certification trails are a recently introduced and promising approach to fault detection and fault tolerance. The applicability of the certification trail technique is significantly generalized. Previously, certification trails had to be customized to each algorithm application; trails appropriate to wide classes of algorithms were developed. These certification trails are based on common data-structure operations such as those carried out using these sets of operations such as those carried out using balanced binary trees and heaps. Any algorithms using these sets of operations can therefore employ the certification trail method to achieve software fault tolerance. To exemplify the scope of the generalization of the certification trail technique provided, constructions of trails for abstract data types such as priority queues and union-find structures are given. These trails are applicable to any data-structure implementation of the abstract data type. It is also shown that these ideals lead naturally to monitors for data-structure operations.

  5. A bottom-up approach to identifying the maximum operational adaptive capacity of water resource systems to a changing climate

    Science.gov (United States)

    Culley, S.; Noble, S.; Yates, A.; Timbs, M.; Westra, S.; Maier, H. R.; Giuliani, M.; Castelletti, A.

    2016-09-01

    Many water resource systems have been designed assuming that the statistical characteristics of future inflows are similar to those of the historical record. This assumption is no longer valid due to large-scale changes in the global climate, potentially causing declines in water resource system performance, or even complete system failure. Upgrading system infrastructure to cope with climate change can require substantial financial outlay, so it might be preferable to optimize existing system performance when possible. This paper builds on decision scaling theory by proposing a bottom-up approach to designing optimal feedback control policies for a water system exposed to a changing climate. This approach not only describes optimal operational policies for a range of potential climatic changes but also enables an assessment of a system's upper limit of its operational adaptive capacity, beyond which upgrades to infrastructure become unavoidable. The approach is illustrated using the Lake Como system in Northern Italy—a regulated system with a complex relationship between climate and system performance. By optimizing system operation under different hydrometeorological states, it is shown that the system can continue to meet its minimum performance requirements for more than three times as many states as it can under current operations. Importantly, a single management policy, no matter how robust, cannot fully utilize existing infrastructure as effectively as an ensemble of flexible management policies that are updated as the climate changes.

  6. Experimental Determination of Operating and Maximum Power Transfer Efficiencies at Resonant Frequency in a Wireless Power Transfer System using PP Network Topology with Top Coupling

    Science.gov (United States)

    Ramachandran, Hema; Pillai, K. P. P.; Bindu, G. R.

    2017-08-01

    A two-port network model for a wireless power transfer system taking into account the distributed capacitances using PP network topology with top coupling is developed in this work. The operating and maximum power transfer efficiencies are determined analytically in terms of S-parameters. The system performance predicted by the model is verified with an experiment consisting of a high power home light load of 230 V, 100 W and is tested for two forced resonant frequencies namely, 600 kHz and 1.2 MHz. The experimental results are in close agreement with the proposed model.

  7. Effect of a manager training and certification program on food safety and hygiene in food service operations.

    Science.gov (United States)

    Kassa, Hailu; Silverman, Gary S; Baroudi, Karim

    2010-05-06

    Food safety is an important public health issue in the U.S. Eating at restaurants and other food service facilities increasingly has been associated with food borne disease outbreaks. Food safety training and certification of food mangers has been used as a method for reducing food safety violations at food service facilities. However, the literature is inconclusive about the effectiveness of such training programs for improving food safety and protecting consumer health. The purpose of this study was to examine the effect of food manger training on reducing food safety violations. We examined food inspection reports from the Toledo/Lucas County Health Department (Ohio) from March 2005 through February 2006 and compared food hygiene violations between food service facilities with certified and without certified food managers. We also examined the impact on food safety of a food service facility being part of a larger group of facilities.Restaurants with trained and certified food managers had significantly fewer critical food safety violations but more non-critical violations than restaurants without certified personnel. Institutional food service facilities had significantly fewer violations than restaurants, and the number of violations did not differ as a function of certification. Similarly, restaurants with many outlets had significantly fewer violations than restaurants with fewer outlets, and training was not associated with lower numbers of violations from restaurants with many outlets. The value of having certified personnel was only observed in independent restaurants and those with few branches. This information may be useful in indicating where food safety problems are most likely to occur. Furthermore, we recommend that those characteristics of institutional and chain restaurants that result in fewer violations should be identified in future research, and efforts made to apply this knowledge at the level of individual restaurants.

  8. Trainer certification

    International Nuclear Information System (INIS)

    Couser, S.; Moore, J.

    1988-01-01

    A DOE Technical Safety Appraisal in October 1986 found that training at the Portsmouth Gaseous Diffusion Plant was fragmented and lacked uniformity. Training was localized in departments and was more often handled by line supervisors, etc. - with no certification. The Trainer Certification Program has provided the means for applying standard guidelines to ensure that training is designed, applied, and evaluated in a consistent, effective, and efficient manner. The program is in a state of substantial change and a target date for compliance is set for 1989. Trainer certification will provide both current and future resources to ensure consistent and effective training. 22 figures

  9. 14 CFR 204.6 - Certificated and commuter air carriers proposing a change in operations, ownership, or management...

    Science.gov (United States)

    2010-01-01

    ... proposing a change in operations, ownership, or management which is not substantial. 204.6 Section 204.6... carriers proposing a change in operations, ownership, or management which is not substantial. Carriers proposing to make a change which would not substantially affect their operations, management, or ownership...

  10. ENVIRONMENTAL MANAGEMENT SYSTEMS CERTIFICATION

    Directory of Open Access Journals (Sweden)

    Aniko Miler-Virc

    2012-12-01

    Full Text Available ISO 14001 prescribes the requirements for a system, not environmental performance itself. Similarly, certification is of the management system itself, not environmental performance. An audit is not conducted to ascertain whether your flue gas emissions are less than X part per million nitrous oxide or that your wastewater effluent contains less that Y milligrams of bacteria per litre. Consequently, the procces of auditing the system for compliance to the standard entails checking to see that all of the necessary components of a functioning system are present and working properly.           A company can have a complete and fully functional EMS as prescribed by ISO 14001 without being certified. As certification can add to the time and expense of EMS development, it is important for you to establish, in advance, whether certification is of net benefit to you. Although most companies that develop an EMS do in fact certify, there are cases where certification does not add immediate value. Certification is not always beneficial to small and medium sized companies. Certification is not always necessary for companies with one or two large clients with environmental demands who are satisfied that you have a functional EMS (second-party declaration. Whatever decision you make, it is important to remember that just as a driver′s licence does not automatically make you a good driver, ISO 14001 certification does not automatically make your company environmentally benign or ensure that you will continually improve environmental performance. The system is only as good as the people who operate it.

  11. 14 CFR 147.39 - Display of certificate.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Display of certificate. 147.39 Section 147...) SCHOOLS AND OTHER CERTIFICATED AGENCIES AVIATION MAINTENANCE TECHNICIAN SCHOOLS Operating Rules § 147.39 Display of certificate. Each holder of an aviation maintenance technician school certificate and ratings...

  12. Green certificates and greenhouse gas emissions certificates - Instruments of the liberalized electricity market in Romania

    International Nuclear Information System (INIS)

    Matei, Magdalena; Salisteanu, Cornel; Enescu, Diana; Ene, Simona; Matei, Lucian; Marinescu, Mihai

    2006-01-01

    Governmental Decision No. 443/2003 and GD 1892 / 2004 aimed to the harmonization of the Romanian legislative framework with EU Directive 2001/77/EC which purposes to promote an increasing in the contribution of RES to electricity production in the internal market for electricity. In Romania's case green certificate system was adopted with mandatory quotas for suppliers as a national target for 2010 of 33 % of total consumption to be covered by electricity produced from renewable energy sources. The annual maximum and minimum value for Green Certificates trading is 24 Euro/certificate and 42 Euro/certificate, respectively. Suppliers are obliged to buy yearly a number of Green certificates equal with the mandatory quota multiplied with the amount of electricity sold yearly to their final consumers. The additional price received for the Green Certificates sold is determined on a parallel market, separated from the electricity market, where the environmental benefits of the 'clean' electricity production are traded. The regulator can modify these quotas established by Government Decision when the installed capacity in the power plants which use RES cannot secure the demand of Green Certificates; This system was introduced in November 2005. The number of issued green certificates in 2005 was only 345, so by ANRE Order no. 46 / 2005, the mandatory quota for 2005 was reduced at 2.6% from legal quota established for 2005. In the first month of 2006 5997 Green Certificates were sold at the price of 146 RON. Emissions trading is the most compatible flexible mechanisms of Kyoto Protocol with deregulated electricity markets. The Directive 2003/87/CE referring at CO 2 emission trading within Europe came into force and till 31 March 2004 all the countries had to present to the Commission their national plan to comply with Directive's rules. There is great uncertainty worldwide on how GHG emissions reduction and trading schemes will develop. Previous visions of a single (Kyoto

  13. A user-operated audiometry method based on the maximum likelihood principle and the two-alternative forced-choice paradigm

    DEFF Research Database (Denmark)

    Schmidt, Jesper Hvass; Brandt, Christian; Pedersen, Ellen Raben

    2014-01-01

    with standard deviation of differences from 3.9 dB to 5.2 dB in the frequency range of 250-8000 Hz. User-operated 2AFC audiometrygave thresholds 1-2 dB lower at most frequencies compared to traditional audiometry. Conclusions: User-operated 2AFC audiometry does not require specific operating skills...

  14. EFEKTIVITAS PENGOPERASIAN INSTALASI PENGOLAH AIR LIMBAH (IPAL PERUSAHAAN PERAIH SERTIFIKASI ISO 14001 DI KAWASAN SIMONGAN KOTA SEMARANG (The Effectivity of Waste Water Treatment Plan Operated by Industrial Companies Holding ISO 14001 Certificate

    Directory of Open Access Journals (Sweden)

    Zaenuri Zaenuri

    2012-07-01

    Full Text Available ABSTRAK Penelitian ini bertujuan untuk menganalisis efektivitas pengoperasian instalasi pengolah air limbah (IPAL perusahaan peraih sel1ifikasi ISO 14001 di Kawasan Simongan Kota Semarang. Data yang diperoleh dianalisis secara deskriptif-komparatif dan inferensial dengan menggunakan uji-t. Hasil penelitian menunjukkan, pada perusahaan farmasi, rata-rata konsentrasi TSS, BOD, dan COD periode 1989-1998 (sebelum memperoleh ISO 14001 masing-masing sebesar 92,3229 mg/I, 45,5022 mg/I, dan 87,3691 mg/I, sedangkan rata-rata pH sebesar 7,2388. Parameter BOD dan COD memenuhi baku mutu, pH dalam interval baku mutu yang ditetapkan, sedangkan TSS berada di atas baku mutu. ABSTRACT This research was intended to analyze the effectivity of  waste water treatment plan operated by industrial companies holding ISO 14001 certificates in Simongan Area of SemarangCity. The data were analyzed descriptively, comparatively and inferentially using t-tests. The analyses showed that prior to obtaining ISO 14001 certificate (1989-1998, the pharmaeutical company had its average concentrations of TSS, BOD, and COD of 92.3229, 45.5022 and 87.3691 mg/l respectively, with an average pH of 7.2388. These parameters of BOD and COD had already met the prevailing standard qualities, the TSS parameter was above the standard quality, and the pH was within the prevailing standard quality interval. After obtaining the ISO 14001 certificate (2005-2008, this pharmaeutical company was able to maintain all of the key parameters to meet the prevailing stadard qualities. In case of the galvanizing company prior to obtaining ISO 14001 certificate (1989-1998, its average concentrations of TSS and CN were 256.3469 and 0.25575 mg/l respectively (above the prevailing standard qualities, those for total Cr, C+6, Cu, Zn, Ni, and Pb were 0.0510, 0.0036, 0.236060, 0.7242, 0.01790 and 0.0286 mg/l respectively (still under the prevailing standard qualities, while the an average pH was within the

  15. 47 CFR 76.1502 - Certification.

    Science.gov (United States)

    2010-10-01

    ... sufficient time to comply with the Commission's notification requirements. (b) Certifications must be... certification in its cable franchise area, a statement that the applicant is qualified to operate an open video... that the applicant will comply with the Commission's notice and enrollment requirements for...

  16. Safety analysis of RA reactor operation, I-III, Part III - Environmental effect of the maximum credible accident; Analiza sigurnosti rada reaktora RA - I-III, III deo - Posledica maksimalno moguceg akcidenta na okolinu reaktora

    Energy Technology Data Exchange (ETDEWEB)

    Raisic, N [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

    1963-02-15

    Maximum credible accident at the RA reactor would consider release of fission products into the environment. This would result from fuel elements failure or meltdown due to loss of coolant. The analysis presented in this report assumes that the reactor was operating at nominal power at the moment of maximum possible accident. The report includes calculations of fission products activity at the moment of accident, total activity release during the accident, concentration of radioactive material in the air in the reactor neighbourhood, and the analysis of accident environmental effects.

  17. 12 CFR 563.74 - Mutual capital certificates.

    Science.gov (United States)

    2010-01-01

    ... the funds for redemption are raised by the issuance of mutual capital certificates approved pursuant... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Mutual capital certificates. 563.74 Section 563...-OPERATIONS Securities and Borrowings § 563.74 Mutual capital certificates. (a) General. No savings...

  18. No certificate, no chocolate

    CERN Multimedia

    Computer Security Team

    2013-01-01

    Are you already ready to use “certificates” to log into CERN or to connect to the global “eduroam” wireless network? No, I am not talking about your birth certificate, medical certificates or academic certificates. I am referring to “certificates” used for authentication where you would usually use a password.   These digital certificates are a valid alternative to cumbersome passwords. Like the aforementioned personal certificates, a digital certificate is an official document that proves who you are or your qualifications. Your personal digital CERN certificate is tied to your digital identity at CERN. In that respect, a digital certificate is like a password. It is a credential that you must not share with anybody else! With your digital certificate, I can impersonate you and take over your mailbox, your web sessions and more… Digital certificates bind your digital identity to a public/private-key infrastructu...

  19. Development of new NDT certification scheme in Singapore

    International Nuclear Information System (INIS)

    Wong, B.S.; Prabhakaran, K.G.; Babu, S.K.; Kuppuswamy, N.

    2009-01-01

    Nondestructive testing plays a vital role in Singapore Industry either it is construction or it it oil and gas. To cope up with the future demands for nondestructive testing personnel and cater to the local industry needs for qualified and certified NDT operators, Nondestructive Testing Society (Singapore)-NDTSS launched the SGNDT Certification Scheme. The aim of the organization is to promote and standardize the quality of NDT through education and training based on a scheme that is on par with internationally recognized 3rd party certifications. The certification also provides a greater confidence to the clients and end users who utilize the NDT test results provided by the certified operators. NDE certification in Singapore varies from industries and currently relies on the in-house certification scheme based on SNT-TC-1A where organizations find it difficult to standardize the skill and reliability of operators. NDE Certification system varies globally from countries to countries. A proper certification system is required to produce successful NDT Practitioners to suit the local industry. This paper outlines the development of Singapore NDT Certification Scheme (SGNDT), the operations, levels of qualification, the method of operation and control measures. The Training and Certification committee, Quality Management system within the certification scheme and the current system practiced in Singapore are discussed in this paper. The paper also highlights the importance of third party certification scheme. (author)

  20. Is Halal Certification Process “Green”?

    Directory of Open Access Journals (Sweden)

    Mohd Rizal Razalli

    2012-09-01

    Full Text Available These days, the environmental perspective on operations is becoming more common. In fact, any effort in improving efficiency in the organization is closely related to sustainability of our environment. The Environmental Management System (EMS certification such as ISO 14001 has been accepted as the world standard. In addition to these ISO standards, there are other certifications such as Halal certification. There is no research that investigates the relationship between Halal Certification process and its effect on our environment. Hence, our main research question is that is Halal Certification process can be considered as environmental friendly? In this paper, we argue that Halal Certification also contributes towards green initiatives. We used EDC-UUM as our case study. EDC-UUM is actively seeking the Halal certification from Malaysian authority agency or JAKIM. In this study, we assessed the perception of the EDC-UUM staff on the issue of going green. The findings and implications are discussed in the paper. Keywords: halal certification, hotel operations, sustainability, green

  1. 49 CFR 605.17 - Certification in lieu of notice.

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SCHOOL BUS OPERATIONS School Bus Agreements § 605.17 Certification in lieu of notice. If there are no private school bus operators operating in the applicant's urban.... This certification shall be accompanied by a statement that the applicant has published, in a newspaper...

  2. 38 CFR 21.9720 - Certification of enrollment.

    Science.gov (United States)

    2010-07-01

    ... standard college degree, the institution of higher learning's certification will include— (i) The... learning has no prescribed maximum time for completion, the certification must include an ending date based...), 3684) (Approved by the Office of Management and Budget under control number 2900-0073) ...

  3. Transit management certificate program.

    Science.gov (United States)

    2012-07-01

    TTI worked closely with the Landscape Architecture and Urban Planning Department : (LAUP) of Texas A&M University (TAMU) to develop a transit management certificate : focus for the current Graduate Certificate in Transportation Planning (CTP) housed ...

  4. Approximate maximum parsimony and ancestral maximum likelihood.

    Science.gov (United States)

    Alon, Noga; Chor, Benny; Pardi, Fabio; Rapoport, Anat

    2010-01-01

    We explore the maximum parsimony (MP) and ancestral maximum likelihood (AML) criteria in phylogenetic tree reconstruction. Both problems are NP-hard, so we seek approximate solutions. We formulate the two problems as Steiner tree problems under appropriate distances. The gist of our approach is the succinct characterization of Steiner trees for a small number of leaves for the two distances. This enables the use of known Steiner tree approximation algorithms. The approach leads to a 16/9 approximation ratio for AML and asymptotically to a 1.55 approximation ratio for MP.

  5. Maximum permissible dose

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    This chapter presents a historic overview of the establishment of radiation guidelines by various national and international agencies. The use of maximum permissible dose and maximum permissible body burden limits to derive working standards is discussed

  6. Deconstructing Teacher Certification

    Science.gov (United States)

    Baines, Lawrence A.

    2006-01-01

    In this article, the author takes a close look at alternative certification programs and is convinced that, because they vary so extremely in their requirements, all of them cannot possibly be producing highly qualified teachers. Here, he talks about Non-University Certification Programs (NUCPs). These are alternative certification programs that…

  7. Solid low-level waste certification strategy

    International Nuclear Information System (INIS)

    Smith, M.A.

    1991-08-01

    The purpose of the Solid Low-Level Waste (SLLW) Certification Program is to provide assurance that SLLW generated at the ORNL meets the applicable waste acceptance criteria for those facilities to which the waste is sent for treatment, handling, storage, or disposal. This document describes the strategy to be used for certification of SLLW or ORNL. The SLLW Certification Program applies to all ORNL operations involving the generation, shipment, handling, treatment, storage and disposal of SLLW. Mixed wastes, containing both hazardous and radioactive constituents, and transuranic wastes are not included in the scope of this document. 13 refs., 3 figs

  8. Linking Halal Food Certification and Business Performance

    DEFF Research Database (Denmark)

    Ab Talib, Mohamed Syazwan; Chin, Thoo Ai; Fischer, Johan

    2017-01-01

    , operational performance mediates the relationship between HFC and financial performance. Altogether, this signifies that Halal food certificate implementation positively influences business performance. Practical implications By linking HFC and business performance, managers may be aware of the significant......Purpose The purpose of this paper is to explore the relationship between Halal food certification (HFC) and business performance. This study argues that Halal food certificate implementation positively influences business performance. Design/methodology/approach A total of 210 Halal certified food...... role of HFC in influencing operational and financial performance. It would entice more food companies to become Halal certified that opens up an opportunity to a lucrative Halal food industry. It also empirically justifies that a religion-based food certification has the ability to influence business...

  9. Task 9. Deployment of photovoltaic technologies: co-operation with developing countries. The role of quality management, hardware certification and accredited training in PV programmes in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Fitzgerald, M. C. [Institute for Sustainable Power, Highlands Ranch, CO (United States); Oldach, R.; Bates, J. [IT Power Ltd, The Manor house, Chineham (United Kingdom)

    2003-09-15

    This report for the International Energy Agency (IEA) made by Task 9 of the Photovoltaic Power Systems (PVPS) programme takes a look at the role of quality management, hardware certification and accredited training in PV programmes in developing countries. The objective of this document is to provide assistance to those project developers that are interested in implementing or improving support programmes for the deployment of PV systems for rural electrification. It is to enable them to address and implement quality assurance measures, with an emphasis on management, technical and training issues and other factors that should be considered for the sustainable implementation of rural electrification programmes. It is considered important that quality also addresses the socio-economic and the socio-technical aspects of a programme concept. The authors summarise that, for a PV programme, there are three important areas of quality control to be implemented: quality management, technical standards and quality of training.

  10. 49 CFR 1150.23 - Modified certificate of public convenience and necessity.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Modified certificate of public convenience and..., ACQUIRE, OR OPERATE RAILROAD LINES Modified Certificate of Public Convenience and Necessity § 1150.23 Modified certificate of public convenience and necessity. (a) The operator must file a notice with the...

  11. Comparison of Certification Authority Roles in Windows Server 2003 and Windows Server 2008

    Directory of Open Access Journals (Sweden)

    A. I. Luchnik

    2011-03-01

    Full Text Available An analysis of Certification Authority components of Microsoft server operating systems was conducted. Based on the results main directions of development of certification authorities and PKI were highlighted.

  12. 46 CFR 115.120 - Certificate of Inspection amendment.

    Science.gov (United States)

    2010-10-01

    ... Certificate of Inspection may be issued to authorize and record a change in the dimensions, gross tonnage, owner, managing operator, manning, persons permitted, route permitted, conditions of operations, or...

  13. Certificate Transparency with Privacy

    Directory of Open Access Journals (Sweden)

    Eskandarian Saba

    2017-10-01

    Full Text Available Certificate transparency (CT is an elegant mechanism designed to detect when a certificate authority (CA has issued a certificate incorrectly. Many CAs now support CT and it is being actively deployed in browsers. However, a number of privacy-related challenges remain. In this paper we propose practical solutions to two issues. First, we develop a mechanism that enables web browsers to audit a CT log without violating user privacy. Second, we extend CT to support non-public subdomains.

  14. Certification of Canadian nuclear power plant personnel

    International Nuclear Information System (INIS)

    Newbury, F.

    2014-01-01

    The Canadian Nuclear Safety Commission (CNSC) regulates the use of nuclear energy and materials to protect health, safety, security of Canadians and the environment, and to implement Canada's international commitments on the peaceful use of nuclear energy. As part of its mandate, the CNSC requires certification of those who work in positions with direct impact on the safety of Canadian nuclear power plants (NPPs) and research reactors. Other positions, such as exposure device operators and radiation safety officers at other nuclear facilities, also require CNSC certification. In this paper, the certification process of Canadian NPP personnel will be examined. In keeping with the CNSC's regulatory philosophy and international practice, licensees bear the primary responsibility for the safe operation of their NPPs. They are therefore held entirely responsible for training and testing their workers, in accordance with applicable regulatory requirements, to ensure they are fully qualified to perform their duties. The CNSC obtains assurance that all persons it certifies are qualified to carry out their respective duties. It achieves this by overseeing a regime of licensee training programs and certification examinations, which are based on a combination of appropriate regulatory guidance and compliance activities. Reviews of the knowledge-based certification examination methodology and of lessons learned from Fukushima have generated initiatives to further strengthen the CNSC's certification programs for NPP workers. Two of those initiatives are discussed in this paper. (author)

  15. Section 608 Technician Certification

    Science.gov (United States)

    Certifications for technicians who maintain, service, repair, or dispose of equipment that could release ozone depleting refrigerants or, after January 1, 2018, substitute refrigerants into the atmosphere.

  16. Medical Certification System -

    Data.gov (United States)

    Department of Transportation — Provides automated risk-based decision making capability in support of medical certification and clearances processing associated fees and supporting surveillance of...

  17. Maximum Acceleration Recording Circuit

    Science.gov (United States)

    Bozeman, Richard J., Jr.

    1995-01-01

    Coarsely digitized maximum levels recorded in blown fuses. Circuit feeds power to accelerometer and makes nonvolatile record of maximum level to which output of accelerometer rises during measurement interval. In comparison with inertia-type single-preset-trip-point mechanical maximum-acceleration-recording devices, circuit weighs less, occupies less space, and records accelerations within narrower bands of uncertainty. In comparison with prior electronic data-acquisition systems designed for same purpose, circuit simpler, less bulky, consumes less power, costs and analysis of data recorded in magnetic or electronic memory devices. Circuit used, for example, to record accelerations to which commodities subjected during transportation on trucks.

  18. Maximum Quantum Entropy Method

    OpenAIRE

    Sim, Jae-Hoon; Han, Myung Joon

    2018-01-01

    Maximum entropy method for analytic continuation is extended by introducing quantum relative entropy. This new method is formulated in terms of matrix-valued functions and therefore invariant under arbitrary unitary transformation of input matrix. As a result, the continuation of off-diagonal elements becomes straightforward. Without introducing any further ambiguity, the Bayesian probabilistic interpretation is maintained just as in the conventional maximum entropy method. The applications o...

  19. Maximum power demand cost

    International Nuclear Information System (INIS)

    Biondi, L.

    1998-01-01

    The charging for a service is a supplier's remuneration for the expenses incurred in providing it. There are currently two charges for electricity: consumption and maximum demand. While no problem arises about the former, the issue is more complicated for the latter and the analysis in this article tends to show that the annual charge for maximum demand arbitrarily discriminates among consumer groups, to the disadvantage of some [it

  20. EAS Telecommunications Certification Bodies (TCB)

    Data.gov (United States)

    Federal Communications Commission — EAS (Equipment Authorization System). A Telecommunication Certification Body (TCB) is an accredited product certification body with the authority to issue Grants of...

  1. Converse Barrier Certificate Theorems

    DEFF Research Database (Denmark)

    Wisniewski, Rafael; Sloth, Christoffer

    2016-01-01

    This paper shows that a barrier certificate exists for any safe dynamical system. Specifically, we prove converse barrier certificate theorems for a class of structurally stable dynamical systems. Other authors have developed a related result by assuming that the dynamical system has neither...

  2. Status of system 80+ design certification

    International Nuclear Information System (INIS)

    Matzie, R.A.

    1992-01-01

    This paper reports that 1991 was a year of great progress in the design certification process for ABB Combustion Engineering Nuclear Power's 1300 MWe evolutionary advanced light water reactor (ALWR) plant, System 80+. As the next generation of nuclear power plants move toward final design approval by the U.S. Nuclear Regulatory Commission (NRC), elements of the design process that emphasize operation and maintenance have become the focus. For System 80+, licensing under the new design certification process is now concentrated on operational support, human engineering, plant layout, and computer-aided engineering

  3. 46 CFR 14.307 - Entries on certificate of discharge.

    Science.gov (United States)

    2010-10-01

    ... operating company, official number of the vessel, class of the vessel, and the nature of the voyage. (b... to the mariner. (d) Except as directed by § 14.313, the shipping company shall keep both copies of the certificate. (e) The company shall provide copies of certificates of discharge to the mariner and...

  4. The CEFRI and radiological protection certification of French companies

    International Nuclear Information System (INIS)

    Marillier, J.C.

    1992-01-01

    In 1990, French nuclear operators and the nuclear industry set up a system for certifying the companies involved in industrial work with exposure to ionizing radiation and the concerned training organizations. Inspectors have been recruited and trained. The first certificates were issued during the past few months. The extension of this certification to cover all work on nuclear sites is being envisaged. (author)

  5. 47 CFR 76.911 - Petition for reconsideration of certification.

    Science.gov (United States)

    2010-10-01

    ... reconsideration of certification. (a) A cable operator (or other interested party) may challenge a franchising... under this section. (2) The franchising authority does not meet the certification standards set forth in... pursuant to paragraph (a)(2) of this section, the Commission will notify the franchising authority of the...

  6. Tradable green certificates in Flanders (Belgium)

    International Nuclear Information System (INIS)

    Verbruggen, Aviel

    2004-01-01

    The paper provides details on green certificate systems in Belgium. The Flemish region has established a system and the Walloon region is preparing a slightly different one. The lack of uniformity and consequently of transparency in one country emphasises the need for more EU leadership in the field. The main part of the article analyses the established Flemish system. Green certificates are complementary to other instruments that promote renewable electricity, e.g. direct subventions on the feed-in price of green electricity or direct subventions on capital investments. Certificates execute a forcing effect on the actual development of green power if the imposed shares of green power in total sales are significant and if the fine level is at the height to enforce the quota. If the fine is too low the incentive effect turns into a financing tax effect. When the green certificate system does the job it is designed for, i.e. operating at the edge of the RES-E development and organise the transition from a non-sustainable to a sustainable power system, certificate prices will be high and reduce end-use consumption of electricity. A segmentation of the RES-E sector along the various RES-E technologies is a necessity to keep any certificate system affordable, effective and efficient. One can segment the tradable certificate market or one can assign a different number of certificates to a different RES-E technology project. Both solutions require an intensive follow-up of cost structures and of other policy measures (subventions), but given the infant state of understanding and experience segmenting markets may be best in the nearby years. (Author)

  7. Perceived Benefits of National Recreation and Park Association Certifications. A Case Study of Certification Holders in Ohio

    Science.gov (United States)

    Xie, Philip F.; Yeatts, Emily; Lee, Bob

    2013-01-01

    The aim of this study is to assess the perceived benefits of National Recreation and Park Association (NRPA) certifications. The NRPA offered three certifications in 2010: Certified Park and Recreation Professional (CPRP), Aquatic Facility Operator (AFO), and Certified Playground Safety Inspector (CPS). The electronic survey sent from authors…

  8. Maximum likely scale estimation

    DEFF Research Database (Denmark)

    Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo

    2005-01-01

    A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and/or ...

  9. Robust Maximum Association Estimators

    NARCIS (Netherlands)

    A. Alfons (Andreas); C. Croux (Christophe); P. Filzmoser (Peter)

    2017-01-01

    textabstractThe maximum association between two multivariate variables X and Y is defined as the maximal value that a bivariate association measure between one-dimensional projections αX and αY can attain. Taking the Pearson correlation as projection index results in the first canonical correlation

  10. WASTE CERTIFICATION PROGRAM PLAN - REVISION 7

    International Nuclear Information System (INIS)

    MORGAN, LK

    2002-01-01

    The primary changes that have been made to this revision reflect the relocation of the Waste Certification Official (WCO) organizationally from the Quality Services Division (QSD) into the Laboratory Waste Services (LWS) Organization. Additionally, the responsibilities for program oversight have been differentiated between the QSD and LWS. The intent of this effort is to ensure that those oversight functions, which properly belonged to the WCO, moved with that function; but retain an independent oversight function outside of the LWS Organization ensuring the potential for introduction of organizational bias, regarding programmatic and technical issues, is minimized. The Waste Certification Program (WCP) itself has been modified to allow the waste certification function to be performed by any of the personnel within the LWS Waste Acceptance/Certification functional area. However, a single individual may not perform both the technical waste acceptance review and the final certification review on the same 2109 data package. Those reviews must be performed by separate individuals in a peer review process. There will continue to be a designated WCO who will have lead programmatic responsibility for the WCP and will exercise overall program operational oversite as well as determine the overall requirements of the certification program. The quality assurance organization will perform independent, outside oversight to ensure that any organizational bias does not degrade the integrity of the waste certification process. The core elements of the previous WCP have been retained, however, the terms and process structure have been modified.. There are now two ''control points,'' (1) the data package enters the waste certification process with the signature of the Generator Interface/Generator Interface Equivalent (GI/GIE), (2) the package is ''certified'', thus exiting the process. The WCP contains three steps, (1) the technical review for waste acceptance, (2) a review of the

  11. Employment certificates on HRT

    CERN Multimedia

    HR Department

    2008-01-01

    As part of the ongoing drive to simplify and streamline administrative procedures and processes, the IT and HR Departments have made employment certificates available on a self-service basis on the HRT application, in the main menu under "My self services". All members of the personnel can thus obtain a certificate of employment or association, in French or in English, for the present or past contractual period. The HR Department’s Records Office remains responsible for issuing any special certificates that might be required. IT-AIS (Administrative Information Services) HR-SPS (Services, Procedures & Social) Records Office – Tel. 73700

  12. Converse Barrier Certificate Theorem

    DEFF Research Database (Denmark)

    Wisniewski, Rafael; Sloth, Christoffer

    2013-01-01

    This paper presents a converse barrier certificate theorem for a generic dynamical system.We show that a barrier certificate exists for any safe dynamical system defined on a compact manifold. Other authors have developed a related result, by assuming that the dynamical system has no singular...... points in the considered subset of the state space. In this paper, we redefine the standard notion of safety to comply with generic dynamical systems with multiple singularities. Afterwards, we prove the converse barrier certificate theorem and illustrate the differences between ours and previous work...

  13. Processos operacionais e resultados de empresas brasileiras após a certificação ambiental ISO 14001 Operation process and results of Brazilian companies according to the ISO 14001 environmental certification

    Directory of Open Access Journals (Sweden)

    Gilberto Jesus Avila

    2006-12-01

    Full Text Available Este trabalho teve como objetivo analisar os resultados operacionais obtidos pelas empresas brasileiras certificadas na Norma ISO 1400. Para alcançar este objetivo, procurou-se identificar os fatores relacionados aos processos de operação e ao desempenho das operações após a certificação ambiental. O método de pesquisa se orientou pela busca de integração entre a análise quantitativa e a análise qualitativa. A análise quantitativa foi baseada no tratamento estatístico de dados atuais resultantes da participação de empresas brasileiras no projeto DEVISO (Developing Countries and ISO 14000. A análise qualitativa, por sua vez, utilizou como mecanismo para coleta de dados a técnica de entrevista pessoal a Gerentes do Sistema de Gestão Ambiental de duas empresas participantes do projeto. A análise quantitativa fundamentou-se na análise fatorial (Análise de Componentes Principais - PCA e na comparação entre médias dos fatores resultantes por meio do teste t de médias emparelhadas. Esta análise possibilitou elaborar uma hierarquia para o desempenho destes fatores quando comparados a um limite máximo. Posteriormente, os fatores identificados foram aprofundados em dois casos. Os fatores identificados para os processos de operação foram: Gerenciamento Ambiental, Fornecedores, Reciclagem e Cooperação. Para o desempenho das operações resultaram os fatores Imagem, Cumprimento de Padrões, Resíduos Tóxicos e Uso Eficiente.The aim of this work was to analyze the operational results achieved for ISO 14001 certificated Brazilian companies. In order to achieve this objective, the factors related to the operation process and the performance of operations according to the certification were identified. The research method integrated qualitative and quantitative analyses. The quantitative step was based on the analysis of the database created by the DEVISO project (Developing Countries and ISO 14000. The qualitative analysis was

  14. Certification Considerations for Adaptive Systems

    Science.gov (United States)

    Bhattacharyya, Siddhartha; Cofer, Darren; Musliner, David J.; Mueller, Joseph; Engstrom, Eric

    2015-01-01

    Advanced capabilities planned for the next generation of aircraft, including those that will operate within the Next Generation Air Transportation System (NextGen), will necessarily include complex new algorithms and non-traditional software elements. These aircraft will likely incorporate adaptive control algorithms that will provide enhanced safety, autonomy, and robustness during adverse conditions. Unmanned aircraft will operate alongside manned aircraft in the National Airspace (NAS), with intelligent software performing the high-level decision-making functions normally performed by human pilots. Even human-piloted aircraft will necessarily include more autonomy. However, there are serious barriers to the deployment of new capabilities, especially for those based upon software including adaptive control (AC) and artificial intelligence (AI) algorithms. Current civil aviation certification processes are based on the idea that the correct behavior of a system must be completely specified and verified prior to operation. This report by Rockwell Collins and SIFT documents our comprehensive study of the state of the art in intelligent and adaptive algorithms for the civil aviation domain, categorizing the approaches used and identifying gaps and challenges associated with certification of each approach.

  15. Maximum power point tracking

    International Nuclear Information System (INIS)

    Enslin, J.H.R.

    1990-01-01

    A well engineered renewable remote energy system, utilizing the principal of Maximum Power Point Tracking can be m ore cost effective, has a higher reliability and can improve the quality of life in remote areas. This paper reports that a high-efficient power electronic converter, for converting the output voltage of a solar panel, or wind generator, to the required DC battery bus voltage has been realized. The converter is controlled to track the maximum power point of the input source under varying input and output parameters. Maximum power point tracking for relative small systems is achieved by maximization of the output current in a battery charging regulator, using an optimized hill-climbing, inexpensive microprocessor based algorithm. Through practical field measurements it is shown that a minimum input source saving of 15% on 3-5 kWh/day systems can easily be achieved. A total cost saving of at least 10-15% on the capital cost of these systems are achievable for relative small rating Remote Area Power Supply systems. The advantages at larger temperature variations and larger power rated systems are much higher. Other advantages include optimal sizing and system monitor and control

  16. THE THIRD PARTY CERTIFICATION SYSTEM FOR ORGANIC PRODUCTS

    Directory of Open Access Journals (Sweden)

    Adina-Roxana MUNTEANU

    2015-12-01

    Full Text Available In the context of an increasing organic trade worldwide, the organic standards and the certification of the organic practices are ever more important and relevant for both business and consumers. The certification by third parties of the organic operators is meant to ensure the application of an organic standard. However, the documented fraud cases are proof that the current system can undergo further improvement. The current paper gives an overview of the mechanisms of certification and inspection worldwide and discusses the issues raised by third party certification of the organic operators in the European context. Moreover, the paper reviews the major arguments for the effectiveness of the third party certification and also points to the improvement possibilities of the systems.

  17. Green certificates causing inconvenience?

    International Nuclear Information System (INIS)

    Torgersen, Lasse

    2002-01-01

    From early 2002, producers of green energy in selected countries have been able to benefit from generous financial support in the Netherlands. Thus, there has been increased sale of green certificates from Norway and Sweden. But the condition that physical energy delivery should accompany the certificates has caused a marked rise in the price of energy in transit through Germany to the Netherlands. This article discusses the green certificate concept and the experience gained from the Netherlands. One conclusion is that if large-scale trade with green certificates is introduced in Europe without the condition of accompanying energy delivery, then producers of hydro-electric power in Norway and Sweden may be the losers

  18. Energetic certification in Europe

    International Nuclear Information System (INIS)

    1998-01-01

    At community level the problem of energy quality control in a building was introduced by EEC recommendation n. 93/76 in 1993. In this item are reported some notes on energetic certification in European countries [it

  19. Certification of support services

    International Nuclear Information System (INIS)

    Hroch, A.; Osusky, V.

    2006-01-01

    In this paper the process of certification of support services in the Slovenske elektrarne, a. s. is described. The nuclear power plants are also included into support services. Provisions and economic aspects of support services are discussed

  20. Renewable Energy Certificates (RECs)

    Science.gov (United States)

    Renewable Energy Certificates (RECs), are tradable, non-tangible energy commodities in the United States that represent proof that 1 megawatt-hour (MWh) of electricity was generated from an eligible renewable energy resource.

  1. Automatic optimization of constants and special mathematic ensuring algorithms SKALA-micro system of RBMK-1000 reactor self-certification in operation

    International Nuclear Information System (INIS)

    Aleksandrov, S.I.; Dmitrenko, V.V.; Postnikov, V.V.; Sviridenkov, A.N.; Yurkin, G.V.; Yakunin, I.S.

    2007-01-01

    Paper dwells upon problems dealing with accuracy improvement of the energy release distribution and the safety margin of the RBMK-1000 operation. The accuracy is improved through the automatic optimization of some constants used in the SKALA-micro system special mathematic ensuring program and the regular self-validation of the algorithm to determine the energy release distribution calculation error. The validation based on the regular scanning of the reactor core by a calibrating detector and through the sequence disabling of the internal detectors is shown to give the close results [ru

  2. 47 CFR 90.203 - Certification required.

    Science.gov (United States)

    2010-10-01

    ... certificated for use under this part. (1) Effective October 16, 2002, except in the 1427-1432 MHz band, an equipment approval may no longer be obtained for in-hospital medical telemetry equipment operating under the provisions of this part. The requirements for obtaining an approval for medical telemetry equipment after...

  3. Tiebreaker: Certification and Multiple Credit Ratings

    NARCIS (Netherlands)

    D.G.J. Bongaerts (Dion); K.J.M. Cremers (Martijn); W.N. Goetzmann (William)

    2008-01-01

    textabstractAbstract: This paper explores the role played by multiple credit rating agencies (CRAs) in the market for corporate bonds. Moody’s, S&P and Fitch operate in a competitive setting with market demand for both credit information and the certification value of a high rating. We

  4. Tiebreaker: Certification and multiple credit ratings

    NARCIS (Netherlands)

    Bongaerts, D.; Cremers, K.J.M.; Goetzmann, W.

    2009-01-01

    This paper explores the role played by multiple credit rating agencies (CRAs) in the market for corporate bonds. Moody’s, S&P and Fitch operate in a competitive setting with market demand for both credit information and the certification value of a high rating. We empirically document the outcome of

  5. Maximum entropy methods

    International Nuclear Information System (INIS)

    Ponman, T.J.

    1984-01-01

    For some years now two different expressions have been in use for maximum entropy image restoration and there has been some controversy over which one is appropriate for a given problem. Here two further entropies are presented and it is argued that there is no single correct algorithm. The properties of the four different methods are compared using simple 1D simulations with a view to showing how they can be used together to gain as much information as possible about the original object. (orig.)

  6. 76 FR 1504 - Pipeline Safety: Establishing Maximum Allowable Operating Pressure or Maximum Operating Pressure...

    Science.gov (United States)

    2011-01-10

    ... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Mitigation AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. ACTION: Notice... system. To that end, the Hazardous Liquid and Gas Transmission Pipeline Integrity Management (IM...

  7. The last glacial maximum

    Science.gov (United States)

    Clark, P.U.; Dyke, A.S.; Shakun, J.D.; Carlson, A.E.; Clark, J.; Wohlfarth, B.; Mitrovica, J.X.; Hostetler, S.W.; McCabe, A.M.

    2009-01-01

    We used 5704 14C, 10Be, and 3He ages that span the interval from 10,000 to 50,000 years ago (10 to 50 ka) to constrain the timing of the Last Glacial Maximum (LGM) in terms of global ice-sheet and mountain-glacier extent. Growth of the ice sheets to their maximum positions occurred between 33.0 and 26.5 ka in response to climate forcing from decreases in northern summer insolation, tropical Pacific sea surface temperatures, and atmospheric CO2. Nearly all ice sheets were at their LGM positions from 26.5 ka to 19 to 20 ka, corresponding to minima in these forcings. The onset of Northern Hemisphere deglaciation 19 to 20 ka was induced by an increase in northern summer insolation, providing the source for an abrupt rise in sea level. The onset of deglaciation of the West Antarctic Ice Sheet occurred between 14 and 15 ka, consistent with evidence that this was the primary source for an abrupt rise in sea level ???14.5 ka.

  8. Example Owner/Operator Certification for Painter Training Under National Emission Standards for Hazardous Air Pollutant (NESHAP): Area Source Standards for Nine Metal Fabrication and Finishing Source Categories 40 CFR 60 Subpart XXXXXX

    Science.gov (United States)

    This example training certification format and any attached training documentation may be used to demonstrate, document and certify successful completion of required training topics under 40 CFR 63.11515(d)(6) for personnel, who spray apply surface coating

  9. Maximum Entropy Fundamentals

    Directory of Open Access Journals (Sweden)

    F. Topsøe

    2001-09-01

    Full Text Available Abstract: In its modern formulation, the Maximum Entropy Principle was promoted by E.T. Jaynes, starting in the mid-fifties. The principle dictates that one should look for a distribution, consistent with available information, which maximizes the entropy. However, this principle focuses only on distributions and it appears advantageous to bring information theoretical thinking more prominently into play by also focusing on the "observer" and on coding. This view was brought forward by the second named author in the late seventies and is the view we will follow-up on here. It leads to the consideration of a certain game, the Code Length Game and, via standard game theoretical thinking, to a principle of Game Theoretical Equilibrium. This principle is more basic than the Maximum Entropy Principle in the sense that the search for one type of optimal strategies in the Code Length Game translates directly into the search for distributions with maximum entropy. In the present paper we offer a self-contained and comprehensive treatment of fundamentals of both principles mentioned, based on a study of the Code Length Game. Though new concepts and results are presented, the reading should be instructional and accessible to a rather wide audience, at least if certain mathematical details are left aside at a rst reading. The most frequently studied instance of entropy maximization pertains to the Mean Energy Model which involves a moment constraint related to a given function, here taken to represent "energy". This type of application is very well known from the literature with hundreds of applications pertaining to several different elds and will also here serve as important illustration of the theory. But our approach reaches further, especially regarding the study of continuity properties of the entropy function, and this leads to new results which allow a discussion of models with so-called entropy loss. These results have tempted us to speculate over

  10. Probable maximum flood control

    International Nuclear Information System (INIS)

    DeGabriele, C.E.; Wu, C.L.

    1991-11-01

    This study proposes preliminary design concepts to protect the waste-handling facilities and all shaft and ramp entries to the underground from the probable maximum flood (PMF) in the current design configuration for the proposed Nevada Nuclear Waste Storage Investigation (NNWSI) repository protection provisions were furnished by the United States Bureau of Reclamation (USSR) or developed from USSR data. Proposed flood protection provisions include site grading, drainage channels, and diversion dikes. Figures are provided to show these proposed flood protection provisions at each area investigated. These areas are the central surface facilities (including the waste-handling building and waste treatment building), tuff ramp portal, waste ramp portal, men-and-materials shaft, emplacement exhaust shaft, and exploratory shafts facility

  11. Introduction to maximum entropy

    International Nuclear Information System (INIS)

    Sivia, D.S.

    1988-01-01

    The maximum entropy (MaxEnt) principle has been successfully used in image reconstruction in a wide variety of fields. We review the need for such methods in data analysis and show, by use of a very simple example, why MaxEnt is to be preferred over other regularizing functions. This leads to a more general interpretation of the MaxEnt method, and its use is illustrated with several different examples. Practical difficulties with non-linear problems still remain, this being highlighted by the notorious phase problem in crystallography. We conclude with an example from neutron scattering, using data from a filter difference spectrometer to contrast MaxEnt with a conventional deconvolution. 12 refs., 8 figs., 1 tab

  12. Solar maximum observatory

    International Nuclear Information System (INIS)

    Rust, D.M.

    1984-01-01

    The successful retrieval and repair of the Solar Maximum Mission (SMM) satellite by Shuttle astronauts in April 1984 permitted continuance of solar flare observations that began in 1980. The SMM carries a soft X ray polychromator, gamma ray, UV and hard X ray imaging spectrometers, a coronagraph/polarimeter and particle counters. The data gathered thus far indicated that electrical potentials of 25 MeV develop in flares within 2 sec of onset. X ray data show that flares are composed of compressed magnetic loops that have come too close together. Other data have been taken on mass ejection, impacts of electron beams and conduction fronts with the chromosphere and changes in the solar radiant flux due to sunspots. 13 references

  13. Introduction to maximum entropy

    International Nuclear Information System (INIS)

    Sivia, D.S.

    1989-01-01

    The maximum entropy (MaxEnt) principle has been successfully used in image reconstruction in a wide variety of fields. The author reviews the need for such methods in data analysis and shows, by use of a very simple example, why MaxEnt is to be preferred over other regularizing functions. This leads to a more general interpretation of the MaxEnt method, and its use is illustrated with several different examples. Practical difficulties with non-linear problems still remain, this being highlighted by the notorious phase problem in crystallography. He concludes with an example from neutron scattering, using data from a filter difference spectrometer to contrast MaxEnt with a conventional deconvolution. 12 refs., 8 figs., 1 tab

  14. Functional Maximum Autocorrelation Factors

    DEFF Research Database (Denmark)

    Larsen, Rasmus; Nielsen, Allan Aasbjerg

    2005-01-01

    MAF outperforms the functional PCA in concentrating the interesting' spectra/shape variation in one end of the eigenvalue spectrum and allows for easier interpretation of effects. Conclusions. Functional MAF analysis is a useful methods for extracting low dimensional models of temporally or spatially......Purpose. We aim at data where samples of an underlying function are observed in a spatial or temporal layout. Examples of underlying functions are reflectance spectra and biological shapes. We apply functional models based on smoothing splines and generalize the functional PCA in......\\verb+~+\\$\\backslash\\$cite{ramsay97} to functional maximum autocorrelation factors (MAF)\\verb+~+\\$\\backslash\\$cite{switzer85,larsen2001d}. We apply the method to biological shapes as well as reflectance spectra. {\\$\\backslash\\$bf Methods}. MAF seeks linear combination of the original variables that maximize autocorrelation between...

  15. Regularized maximum correntropy machine

    KAUST Repository

    Wang, Jim Jing-Yan; Wang, Yunji; Jing, Bing-Yi; Gao, Xin

    2015-01-01

    In this paper we investigate the usage of regularized correntropy framework for learning of classifiers from noisy labels. The class label predictors learned by minimizing transitional loss functions are sensitive to the noisy and outlying labels of training samples, because the transitional loss functions are equally applied to all the samples. To solve this problem, we propose to learn the class label predictors by maximizing the correntropy between the predicted labels and the true labels of the training samples, under the regularized Maximum Correntropy Criteria (MCC) framework. Moreover, we regularize the predictor parameter to control the complexity of the predictor. The learning problem is formulated by an objective function considering the parameter regularization and MCC simultaneously. By optimizing the objective function alternately, we develop a novel predictor learning algorithm. The experiments on two challenging pattern classification tasks show that it significantly outperforms the machines with transitional loss functions.

  16. Regularized maximum correntropy machine

    KAUST Repository

    Wang, Jim Jing-Yan

    2015-02-12

    In this paper we investigate the usage of regularized correntropy framework for learning of classifiers from noisy labels. The class label predictors learned by minimizing transitional loss functions are sensitive to the noisy and outlying labels of training samples, because the transitional loss functions are equally applied to all the samples. To solve this problem, we propose to learn the class label predictors by maximizing the correntropy between the predicted labels and the true labels of the training samples, under the regularized Maximum Correntropy Criteria (MCC) framework. Moreover, we regularize the predictor parameter to control the complexity of the predictor. The learning problem is formulated by an objective function considering the parameter regularization and MCC simultaneously. By optimizing the objective function alternately, we develop a novel predictor learning algorithm. The experiments on two challenging pattern classification tasks show that it significantly outperforms the machines with transitional loss functions.

  17. Product-based Safety Certification for Medical Devices Embedded Software.

    Science.gov (United States)

    Neto, José Augusto; Figueiredo Damásio, Jemerson; Monthaler, Paul; Morais, Misael

    2015-01-01

    Worldwide medical device embedded software certification practices are currently focused on manufacturing best practices. In Brazil, the national regulatory agency does not hold a local certification process for software-intensive medical devices and admits international certification (e.g. FDA and CE) from local and international industry to operate in the Brazilian health care market. We present here a product-based certification process as a candidate process to support the Brazilian regulatory agency ANVISA in medical device software regulation. Center of Strategic Technology for Healthcare (NUTES) medical device embedded software certification is based on a solid safety quality model and has been tested with reasonable success against the Class I risk device Generic Infusion Pump (GIP).

  18. Implementation procedures for design certification

    International Nuclear Information System (INIS)

    Ritterbusch, S. E.; Brinkman, C. B.; Crump, M. W.

    1995-01-01

    The desire for safer plants arose primarily as the result of the Three Mile Island accident and the realization that plant safety could be impacted by complex plant systems interactions that are not easily identified through the traditional 'system-by-system' design process. Hence, it became apparent that the ALWR designs would have to be addressed through plant-wide Probabilistic Safety Assessments (PSAs) that addressed both accident-prevention and accident-mitigation design features. Prior to Design Certification the 'two-step' licensing process in the United States was not efficient. Utilities had to commit large amounts of capital to plant construction without confidence that an operating license would be issued when construction permit was issued often required design changes that resulted in significant construction delays. The 55 utilities operating nuclear plants in the U. S. each had their own design and operating preferences, resulting in many customized plants with a minimum of economic benefit from standardization. This was addressed by the U. S. Nuclear Regulatory Commission (NRC) in a new regulation (Title 10 of the Code of Federal Regulations, Part 52 or '10 CFR 52') which provides certification of a design that can later be referenced by an applicant for a Combined Operating License (COL). Identifying an ALWR solution for previously unanalyzed severe accident scenarios appeared difficult, at best, since severe accident research had to be performed and since there was no regulatory precedent. This meant that complex technical issues and licensing review policies had to be developed without the benefit of licensing standards or experience. As a result, a system of iterative interactions between the regulator and the industry was established, wherein a design or safety requirement would be proposed, then discussed along with development of the corresponding design feature, and finally revised and documented via NRC 'guidance'

  19. DGNB Building Certification Companion

    DEFF Research Database (Denmark)

    Møller, Renate Skovgaard; Rhodes, Michael K.; Larsen, Tine Steen

    2017-01-01

    for sustainable buildings. The literature describes several barriers of entry preventing actors in the industry from seeking sustainability certifications and prioritizing design methods, supporting sustainability in greater numbers. In the newly developed tool, “DGNB building certification companion: Sustainable......-language, easily digestible summaries of various topics regarding sustainability and the DGNB certification scheme. The identified barriers are described in the tool followed by a solution to overcome them. The tool, tested at multiple stages of development and moulded by many individuals both within and outside...... was that this is a desired product on the market. This new approach is expected to dramatically reduce misunderstandings, conflicts, and mistakes during a sustainable design process, helping the design team plan a project to possibly obtain the highest DGNB score if desired and properly documented....

  20. DGNB BUILDING CERTIFICATION COMPANION

    DEFF Research Database (Denmark)

    Møller, Renate Skovgaard; Rhodes, Michael K.; Larsen, Tine Steen

    2018-01-01

    for sustainable buildings. The literature describes several barriers of entry preventing actors in the industry from seeking sustainability certifications and prioritizing design methods, supporting sustainability in greater numbers. In the newly developed tool, “DGNB building certification companion: Sustainable......-language, easily digestible summaries of various topics regarding sustainability and the DGNB certification scheme. The identified barriers are described in the tool followed by a solution to overcome them. The tool, tested at multiple stages of development and moulded by many individuals both within and outside...... was that this is a desired product on the market. This new approach is expected to dramatically reduce misunderstandings, conflicts, and mistakes during a sustainable design process, helping the design team plan a project to possibly obtain the highest DGNB score if desired and properly documented....

  1. Soy production and certification

    DEFF Research Database (Denmark)

    Tomei, Julia; Semino, Stella Maris; Paul, Helena

    2010-01-01

    With the rising emphasis on biofuels as a potential solution to climate change, this paper asks whether certification schemes, developed to promote sustainable feedstock production, are able to deliver genuine sustainability benefits. The Round Table on Responsible Soy (RTRS) is a certification...... the social and environmental impacts of soybean production can be mitigated by the RTRS. It concludes that at present certification schemes are unlikely to be able to address either the institutional challenges associated with their implementation or the detrimental impacts of the additional demand generated...... scheme that aims to promote responsible soy production through the development of principles and criteria. However, can and does this initiative address the negative impacts associated with the intensive production of soy? Taking the example of soy biodiesel produced in Argentina, this paper asks whether...

  2. Solar maximum mission

    International Nuclear Information System (INIS)

    Ryan, J.

    1981-01-01

    By understanding the sun, astrophysicists hope to expand this knowledge to understanding other stars. To study the sun, NASA launched a satellite on February 14, 1980. The project is named the Solar Maximum Mission (SMM). The satellite conducted detailed observations of the sun in collaboration with other satellites and ground-based optical and radio observations until its failure 10 months into the mission. The main objective of the SMM was to investigate one aspect of solar activity: solar flares. A brief description of the flare mechanism is given. The SMM satellite was valuable in providing information on where and how a solar flare occurs. A sequence of photographs of a solar flare taken from SMM satellite shows how a solar flare develops in a particular layer of the solar atmosphere. Two flares especially suitable for detailed observations by a joint effort occurred on April 30 and May 21 of 1980. These flares and observations of the flares are discussed. Also discussed are significant discoveries made by individual experiments

  3. Maximum power per VA control of vector controlled interior ...

    Indian Academy of Sciences (India)

    Thakur Sumeet Singh

    2018-04-11

    Apr 11, 2018 ... Department of Electrical Engineering, Indian Institute of Technology Delhi, New ... The MPVA operation allows maximum-utilization of the drive-system. ... Permanent magnet motor; unity power factor; maximum VA utilization; ...

  4. A software product certification model

    NARCIS (Netherlands)

    Heck, P.M.; Klabbers, M.D.; van Eekelen, Marko

    2010-01-01

    Certification of software artifacts offers organizations more certainty and confidence about software. Certification of software helps software sales, acquisition, and can be used to certify legislative compliance or to achieve acceptable deliverables in outsourcing. In this article, we present a

  5. Linking Halal Food Certification and Business Performance

    DEFF Research Database (Denmark)

    Ab Talib, Mohamed Syazwan; Chin, Thoo Ai; Fischer, Johan

    2017-01-01

    role of HFC in influencing operational and financial performance. It would entice more food companies to become Halal certified that opens up an opportunity to a lucrative Halal food industry. It also empirically justifies that a religion-based food certification has the ability to influence business...... manufacturing companies in Malaysia participated in the study. Data were gathered through a structured questionnaire and were analysed using partial least squares structural equation modelling technique. Findings The study proved that HFC has a positive relationship with operational performance. Additionally......, operational performance mediates the relationship between HFC and financial performance. Altogether, this signifies that Halal food certificate implementation positively influences business performance. Practical implications By linking HFC and business performance, managers may be aware of the significant...

  6. Training and Certification of Research Reactor Personnel

    International Nuclear Information System (INIS)

    Zarina Masood

    2011-01-01

    The safe operation of a research reactor requires that reactor personnel be fully trained and certified by the relevant authorities. Reactor operators at PUSPATI TRIGA Reactor underwent extensive training and are certified, ever since the reactor first started its operation in 1982. With the emphasis on enhancing reactor safety in recent years, reactor operator training and certification have also evolved. This paper discusses the changes that have to be implemented and the challenges encountered in developing a new training programme to be in line with the national standards. (author)

  7. System certification: An alternative to package certification?

    International Nuclear Information System (INIS)

    Luna, R.E.; Jefferson, R.J.

    1992-01-01

    One precept of the current radioactive material transportation regulations is that the package is the primary protection for the public. A packaging is chosen to provide containment, shielding, and criticality control suitable to the quantity and characteristics of the radionuclide being transported. Occasionally, radioactive materials requiring transport are not of a mass or size that would allow the materials to be shipped in an appropriate packaging. This is a particular problem for materials that should be shipped in a Type B package, but because such packages are designed and certified for specific contents, the package is usually fairly expensive, available in relatively small numbers, and often requires a fairly long period to achieve certification or amended certification for new contents. Where the shipment to be made is relatively infrequent, there may be economic and time penalties that may hamper shipment or force the shipper into uneconomic or high risk options. However, there is recognition of such situations in the International Atomic Energy Agency (IAEA) regulations under the provisions for Special Arrangement

  8. Review of utility staff training and certification

    International Nuclear Information System (INIS)

    1999-04-01

    The Advisory Committee on Nuclear Safety (ACNS) has reviewed the nuclear utility training programs in Canada and the Atomic Energy Control Board (AECB) certification program, to determine their effectiveness in meeting current and future needs. It has also looked briefly at the practices in other countries and in the aviation industry in Canada, by way of comparison. While a quantitative measure of effectiveness was beyond the scope of this review, on a purely qualitative basis the ACNS concludes that the current training and certification regime produces qualified operators, but not necessarily in the most effective way. The report makes five recommendations. The thrust of these recommendations is towards a more effective and streamlined training and certification regime based on strict adherence to the Systematic Approach to Training (SAT) methodology combined with independent verification through a peer review and accreditation process. The Committee believes that training and qualification of nuclear power plant operating staff is the complete responsibility of the utilities and that the role of the AECB is to audit the process to ensure that the utilities discharge their responsibility appropriately. In other words, the AECB should deal with operator training and certification in the same way that it deals with other aspects of nuclear power plant operation that are important to health, safety, security and the environment - by inspections and audits. The Committee believes that the proposed regulatory requirement for recertification of certain nuclear power plant operating staff, which would come into effect when the new Regulations are promulgated, is not consistent with the government's thrust and with how the AECB regulates other aspects of nuclear power plant operations. (author)

  9. Board Certification in Counseling Psychology

    Science.gov (United States)

    Crowley, Susan L.; Lichtenberg, James W.; Pollard, Jeffrey W.

    2012-01-01

    Although specialty board certification by the American Board of Professional Psychology (ABPP) has been a valued standard for decades, the vast majority of counseling psychologists do not pursue board certification in the specialty. The present article provides a brief history of board certification in general and some historical information about…

  10. Tradable Earthquake Certificates

    NARCIS (Netherlands)

    Woerdman, Edwin; Dulleman, Minne

    2018-01-01

    This article presents a market-based idea to compensate for earthquake damage caused by the extraction of natural gas and applies it to the case of Groningen in the Netherlands. Earthquake certificates give homeowners a right to yearly compensation for both property damage and degradation of living

  11. Status of Forest Certification

    Science.gov (United States)

    Omar Espinoza; Urs Buehlmann; Michael Dockry

    2013-01-01

    Forest certification systems are voluntary, market-based initiatives to promote the sustainable use of forests. These standards assume that consumers prefer products made from materials grown in an environmentally sustainable fashion, and this in turn creates incentives for companies to adopt responsible environmental practices. One of the major reasons for the...

  12. Use of Balance Calibration Certificate to Calculate the Errors of Indication and Measurement Uncertainty in Mass Determinations Performed in Medical Laboratories

    Directory of Open Access Journals (Sweden)

    Adriana VÂLCU

    2011-09-01

    Full Text Available Based on the reference document, the article proposes the way to calculate the errors of indication and associated measurement uncertainties, by resorting to the general information provided by the calibration certificate of a balance (non-automatic weighing instruments, shortly NAWI used in medical field. The paper may be also considered a useful guideline for: operators working in laboratories accredited in medical (or other various fields where the weighing operations are part of their testing activities; test houses, laboratories, or manufacturers using calibrated non-automatic weighing instruments for measurements relevant for the quality of production subject to QM requirements (e.g. ISO 9000 series, ISO 10012, ISO/IEC 17025; bodies accrediting laboratories; accredited laboratories for the calibration of NAWI. Article refers only to electronic weighing instruments having maximum capacity up to 30 kg. Starting from the results provided by a calibration certificate it is presented an example of calculation.

  13. 14 CFR 120.11 - Refusal to submit to a drug or alcohol test by a Part 61 certificate holder.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Refusal to submit to a drug or alcohol test...: CERTIFICATION AND OPERATIONS DRUG AND ALCOHOL TESTING PROGRAM Individuals Certificated Under Parts 61, 63, and 65 § 120.11 Refusal to submit to a drug or alcohol test by a Part 61 certificate holder. (a) This...

  14. 14 CFR 120.15 - Refusal to submit to a drug or alcohol test by a Part 65 certificate holder.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Refusal to submit to a drug or alcohol test...: CERTIFICATION AND OPERATIONS DRUG AND ALCOHOL TESTING PROGRAM Individuals Certificated Under Parts 61, 63, and 65 § 120.15 Refusal to submit to a drug or alcohol test by a Part 65 certificate holder. (a) This...

  15. 14 CFR 120.13 - Refusal to submit to a drug or alcohol test by a Part 63 certificate holder.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Refusal to submit to a drug or alcohol test...: CERTIFICATION AND OPERATIONS DRUG AND ALCOHOL TESTING PROGRAM Individuals Certificated Under Parts 61, 63, and 65 § 120.13 Refusal to submit to a drug or alcohol test by a Part 63 certificate holder. (a) This...

  16. 14 CFR 63.42 - Flight engineer certificate issued on basis of a foreign flight engineer license.

    Science.gov (United States)

    2010-01-01

    ... section, may have a flight engineer certificate issued to him for the operation of civil aircraft of U.S... engineer certificate issued under this section may act as a flight engineer of a civil aircraft of U.S... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Flight engineer certificate issued on basis...

  17. 76 FR 9376 - Proposed Extension of Existing Information Collection on Qualification/Certification Program and...

    Science.gov (United States)

    2011-02-17

    ... Extension of Existing Information Collection on Qualification/Certification Program and Man Hoist Operators... 77.107-1 on Qualification/Certification Program and Man Hoist Operators Physical Fitness. DATES: All... Labor or Secretary of Health and Human Services must make frequent inspections and investigations in...

  18. Certification plan for safety and PRA codes

    International Nuclear Information System (INIS)

    Toffer, H.; Crowe, R.D.; Ades, M.J.

    1990-05-01

    A certification plan for computer codes used in Safety Analyses and Probabilistic Risk Assessment (PRA) for the operation of the Savannah River Site (SRS) reactors has been prepared. An action matrix, checklists, and a time schedule have been included in the plan. These items identify what is required to achieve certification of the codes. A list of Safety Analysis and Probabilistic Risk Assessment (SA ampersand PRA) computer codes covered by the certification plan has been assembled. A description of each of the codes was provided in Reference 4. The action matrix for the configuration control plan identifies code specific requirements that need to be met to achieve the certification plan's objectives. The checklist covers the specific procedures that are required to support the configuration control effort and supplement the software life cycle procedures based on QAP 20-1 (Reference 7). A qualification checklist for users establishes the minimum prerequisites and training for achieving levels of proficiency in using configuration controlled codes for critical parameter calculations

  19. Low-level waste certification plan

    International Nuclear Information System (INIS)

    Greenhalph, W.O.

    1995-01-01

    This plan describes the organization and methodology for the certification of solid low-level waste (LLW) and mixed-waste (MW) generated at any of the facilities or major work activities of the Engineered Process Application (EPA) organization. The primary LLW and MW waste generating facility operated by EPA is the 377 Building. This plan does not cover the handling of hazardous or non-regulated waste, though they are mentioned at times for completeness

  20. Certification/enforcement analysis

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-06-01

    Industry compliance with minimum energy efficiency standards will be assured through a two-part program approach of certification and enforcement activities. The technical support document (TSD) presents the analyses upon which the proposed rule for assuring that consumer product comply with applicable energy efficiency standards is based. Much of the TSD is based upon support provided DOE by Vitro Laboratories. The OAO Corporation provided additional support in the development of the sampling plan incorporated in the proposed rule. Vitro's recommended approach to appliance certification and enforcement, developed after consideration of various program options, benefits, and impacts, establishes the C/E program framework, general criteria, and procedures for assuring a specified level of energy efficiency performance of covered consumer products. The results of the OAO analysis are given in Volume II of the TSD.

  1. 40 CFR 745.90 - Renovator certification and dust sampling technician certification.

    Science.gov (United States)

    2010-07-01

    ... sampling technician certification. 745.90 Section 745.90 Protection of Environment ENVIRONMENTAL PROTECTION... technician certification. (a) Renovator certification and dust sampling technician certification. (1) To become a certified renovator or certified dust sampling technician, an individual must successfully...

  2. 78 FR 64153 - Direct Certification and Certification of Homeless, Migrant and Runaway Children for Free School...

    Science.gov (United States)

    2013-10-28

    ...-0001] RIN 0584-AD60 Direct Certification and Certification of Homeless, Migrant and Runaway Children... interim rule entitled Direct Certification and Certification of Homeless, Migrant and Runaway Children for...

  3. Nursing Informatics Certification Worldwide: History, Pathway, Roles, and Motivation

    Science.gov (United States)

    Cummins, M. R.; Gundlapalli, A. V.; Murray, P.; Park, H.-A.; Lehmann, C. U.

    2016-01-01

    numbers of informatics nurses are pursuing certification. Conclusions The pathway to certification is clear and well-established for U.S. based informatics nurses. The motivation for obtaining and maintaining nursing informatics certification appears to be stronger for nurses who do not have an advanced informatics degree. The primary difference between nursing and physician certification pathways relates to the requirement of formal training and level of informatics practice. Nurse informatics certification requires no formal education or training and verifies knowledge and skill at a more basic level. Physician informatics certification validates informatics knowledge and skill at a more advanced level; currently this requires documentation of practice and experience in clinical informatics and in the future will require successful completion of an accredited two-year fellowship in clinical informatics. For the profession of nursing, a graduate degree in nursing or biomedical informatics validates specialty knowledge at a level more comparable to the physician certification. As the field of informatics and its professional organization structures mature, a common certification pathway may be appropriate. Nurses, physicians, and other healthcare professionals with informatics training and certification are needed to contribute their expertise in clinical operations, teaching, research, and executive leadership. PMID:27830261

  4. Credal Networks under Maximum Entropy

    OpenAIRE

    Lukasiewicz, Thomas

    2013-01-01

    We apply the principle of maximum entropy to select a unique joint probability distribution from the set of all joint probability distributions specified by a credal network. In detail, we start by showing that the unique joint distribution of a Bayesian tree coincides with the maximum entropy model of its conditional distributions. This result, however, does not hold anymore for general Bayesian networks. We thus present a new kind of maximum entropy models, which are computed sequentially. ...

  5. Density estimation by maximum quantum entropy

    International Nuclear Information System (INIS)

    Silver, R.N.; Wallstrom, T.; Martz, H.F.

    1993-01-01

    A new Bayesian method for non-parametric density estimation is proposed, based on a mathematical analogy to quantum statistical physics. The mathematical procedure is related to maximum entropy methods for inverse problems and image reconstruction. The information divergence enforces global smoothing toward default models, convexity, positivity, extensivity and normalization. The novel feature is the replacement of classical entropy by quantum entropy, so that local smoothing is enforced by constraints on differential operators. The linear response of the estimate is proportional to the covariance. The hyperparameters are estimated by type-II maximum likelihood (evidence). The method is demonstrated on textbook data sets

  6. COSPAS-SARSAT Beacon Certification Facility

    Data.gov (United States)

    Federal Laboratory Consortium — EPG's COSPAS-SARSAT Beacon Certification Facility is one of five certification facilities in the world. Formal certifications are available for all beacon types and...

  7. The Whys and Hows of Certification. Public Librarian Certification Law.

    Science.gov (United States)

    Wisconsin State Dept. of Public Instruction, Madison. Div. of Library Services.

    Under Wisconsin state law (Administrative Code P1-6.03) any librarian employed in a public library system or any municipal public library, except in a city of the first class, supported in whole or in part by public funds, must hold state certification. Qualifications are delineated for three grades of certification: grade 1, for public libraries…

  8. PULSE Pilot Certification Results

    Directory of Open Access Journals (Sweden)

    Pamela Pape-Lindstrom

    2015-08-01

    Full Text Available The pilot certification process is an ambitious, nationwide endeavor designed to motivate important changes in life sciences education that are in line with the recommendations of the 2011 Vision and Change Report: A Call to Action (American Association for the Advancement of Science [AAAS], 2011.  It is the goal of the certification process to acknowledge departments that have progressed towards full implementation of the tenets of Vision and Change and to motivate departments that have not begun to adopt the recommendations to consider doing so.  More than 70 life science departments applied to be part of the pilot certification process, funded by a National Science Foundation grant, and eight were selected based on initial evidence of transformed and innovative educational practices.  The programs chosen represent a wide variety of schools, including two-year colleges, liberal-arts institutions, regional comprehensive colleges, research universities and minority serving institutions.  Outcomes from this pilot were released June 1, 2015 (www.pulsecommunity.org, with all eight programs being recognized as having progressed along a continuum of change.  Five levels of achievement were defined as PULSE Pilot Progression Levels.  Of the eight departments in the pilot, one achieved “PULSE Progression Level III: Accomplished”.  Six departments achieved “PULSE Progression Level II: Developing” and one pilot department achieved “PULSE Progression Level I: Beginning”.  All of the schools have made significant movement towards the recommendations of Vision and Change relative to a traditional life sciences curriculum.  Overall, the response from the eight pilot schools has been positive. 

  9. Emergency Teacher Certification. ERIC Digest.

    Science.gov (United States)

    Ashburn, Elizabeth A.

    Emergency certification involves the issuance of teaching licenses to individuals who have not completed a traditional college or university teacher education program. This two-page information review examines the problems arising from emergency certification and its relationship to student achievement. Some alternatives to emergency certification…

  10. Personnel training and certification

    International Nuclear Information System (INIS)

    Whittemore, W.L.

    1976-01-01

    In order to make the full benefits of neutron radiography available in the nondestructive test (NDT) field, it has been necessary to formalize its application. A group under the Penetrating Radiation Committee of the American Society for Nondestructive Testing (ASNT) was organized to prepare a recommended practice for neutron radiography. The recommended practices require the establishment of an appropriate certification program. The requirements on the employer to establish and maintain a qualification and certification program are outlined. To conduct a program of nondestructive testing using neutron radiography requires the usual three levels of qualified and certified personnel. The program is administered by a Level III person. Routine exposure, reviews, and reporting of test results are the responsibilities of Level I and Level II personnal. The amount of training and nature of the required practical examination are also specified. The recommended practices document assures users that NDT work in the field of neutron radiography is performed by qualified personnel. Although no training courses are available to provide experience in the depth required by the recommended practices document, SNT-TC-1A, short courses are provided at a number of locations to familarize user's representatives with the interpretation of neutron radiographs and capabilities and limitations of the technique

  11. A Maximum Radius for Habitable Planets.

    Science.gov (United States)

    Alibert, Yann

    2015-09-01

    We compute the maximum radius a planet can have in order to fulfill two constraints that are likely necessary conditions for habitability: 1- surface temperature and pressure compatible with the existence of liquid water, and 2- no ice layer at the bottom of a putative global ocean, that would prevent the operation of the geologic carbon cycle to operate. We demonstrate that, above a given radius, these two constraints cannot be met: in the Super-Earth mass range (1-12 Mearth), the overall maximum that a planet can have varies between 1.8 and 2.3 Rearth. This radius is reduced when considering planets with higher Fe/Si ratios, and taking into account irradiation effects on the structure of the gas envelope.

  12. NASA's EOSDIS, Trust and Certification

    Science.gov (United States)

    Ramapriyan, H. K.

    2017-01-01

    NASA's Earth Observing System Data and Information System (EOSDIS) has been in operation since August 1994, managing most of NASA's Earth science data from satellites, airborne sensors, filed campaigns and other activities. Having been designated by the Federal Government as a project responsible for production, archiving and distribution of these data through its Distributed Active Archive Centers (DAACs), the Earth Science Data and Information System Project (ESDIS) is responsible for EOSDIS, and is legally bound by the Office of Management and Budgets circular A-130, the Federal Records Act. It must follow the regulations of the National Institute of Standards and Technologies (NIST) and National Archive and Records Administration (NARA). It must also follow the NASA Procedural Requirement 7120.5 (NASA Space Flight Program and Project Management). All these ensure that the data centers managed by ESDIS are trustworthy from the point of view of efficient and effective operations as well as preservation of valuable data from NASA's missions. Additional factors contributing to this trust are an extensive set of internal and external reviews throughout the history of EOSDIS starting in the early 1990s. Many of these reviews have involved external groups of scientific and technological experts. Also, independent annual surveys of user satisfaction that measure and publish the American Customer Satisfaction Index (ACSI), where EOSDIS has scored consistently high marks since 2004, provide an additional measure of trustworthiness. In addition, through an effort initiated in 2012 at the request of NASA HQ, the ESDIS Project and 10 of 12 DAACs have been certified by the International Council for Science (ICSU) World Data System (WDS) and are members of the ICSUWDS. This presentation addresses questions such as pros and cons of the certification process, key outcomes and next steps regarding certification. Recently, the ICSUWDS and Data Seal of Approval (DSA) organizations

  13. Energy saving certificates; Les certificats d'economies d'energie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-11-15

    The French ministry of economy, finances and industry and the French agency of environment and energy mastery (Ademe) have organized on November 8, 2005, a colloquium for the presentation of the energy saving certificates, a new tool to oblige the energy suppliers to encourage their clients to make energy savings. This document gathers the transparencies presented at this colloquium about the following topics: state-of-the-art and presentation of the energy saving certificates system: presentation of the EEC system, presentation of the EEC standard operations; the energy saving certificates in Europe today: energy efficiency commitment in UK, Italian white certificate scheme, perspectives of the different European systems. (J.S.)

  14. Oil spill sorbents: Testing protocol and certification listing program

    International Nuclear Information System (INIS)

    Cooper, D.; Gausemel, I.

    1993-01-01

    Environment Canada's Emergencies Engineering Division is spearheading a program in conjunction with the Canadian General Standards Board that would see the development of a certification and listing program in addition to a national standard for the testing of sorbent materials. Funding for this program is provided by Environment Canada (EC), Canadian Coast Guard (CCG), Marine Spill Response Corporation (MSRC), US Coast Guard (USCG), and US Minerals Management Service (MMS). The test methods are based upon those defined by the American Society for Testing and Materials and previous test methods developed by Environment Canada for our series of reports entitled Selection Criteria and Laboratory Evaluation of Oil Spill Sorbents. This series, which was started in 1975, encompasses a number of commercially available oil spill sorbents tested with different petroleum products and hydrocarbon solvents. The testing program will categorize the sorbents according to their operating characteristics. The main categories are oil spills on water, oil spills on land, and industrial use. The characteristics to be evaluated with the new test protocols include initial and maximum sorption capacities, water pickup, buoyancy, reuse potential, retention profile, disintegration (material integrity), and ease of application and retrieval. In the near future are plans to incorporate changes to the test that would involve increasing the list of test liquids to encompass spills in an industrial setting, in addition to testing sorbent booms and addressing the disposal problem

  15. 77 FR 61721 - Pilot, Flight Instructor, and Pilot School Certification; Technical Amendment

    Science.gov (United States)

    2012-10-11

    ...-26661; Amdt. No. 61-129A] RIN 2120-AI86 Pilot, Flight Instructor, and Pilot School Certification... revise the training, qualification, certification, and operating requirements for pilots, flight instructors, ground instructors, and pilot schools. A portion of the codified text was inadvertently deleted...

  16. Absence from work and the medical sickness certificate.

    Science.gov (United States)

    Massoni, F; Salesi, M; Sarra, M V; Ricci, S

    2013-03-01

    Internet and dematerialization have greatly facilitated the medical profession. Contractual physicians and national health service doctors now have efficient tools for the electronic management of their routine administrative workload. A recent innovation is the medical sickness certificate issued by primary care providers and national health service physicians. Following postponements and uncertainties, procedures for the electronic completion and online transmission of the sickness certificate are now complete. The changes introduced by the so-called "Brunetta decree", however, have made its application difficult and continuous improvement to the system is needed, considering also the severe penalties imposed for violations. In the light of serious legal repercussions for health care professionals, this article examines various critical issues, highlighting the pitfalls and the network's enormous potential for ascertaining evidence of irregularities. The overheated debate on absenteeism due to illness, the diverse roles of national health physicians and self-employed doctors responsible for issuing a sickness certificate, and problems related to circumstances in which a doctor operates, are the key topics in this discussion. Computerization is an effective tool for optimizing public resources; however, it also seeks to ferret out, through the traceability of certification, abuse of medical certification, with severe penalties applied if certificates are discovered to contain misleading or untrue information.

  17. Performance or marketing benefits? The case of LEED certification.

    Science.gov (United States)

    Matisoff, Daniel C; Noonan, Douglas S; Mazzolini, Anna M

    2014-01-01

    Green building adoption is driven by both performance-based benefits and marketing based benefits. Performance based benefits are those that improve performance or lower operating costs of the building or of building users. Marketing benefits stem from the consumer response to green certification. This study illustrates the relative importance of the marketing based benefits that accrue to Leadership in Energy and Environmental Design (LEED) buildings due to green signaling mechanisms, specifically related to the certification itself are identified. Of course, all participants in the LEED certification scheme seek marketing benefits. But even among LEED participants, the interest in green signaling is pronounced. The green signaling mechanism that occurs at the certification thresholds shifts building patterns from just below to just above the threshold level, and motivates builders to cluster buildings just above each threshold. Results are consistent across subsamples, though nonprofit organizations appear to build greener buildings and engage in more green signaling than for-profit entities. Using nonparametric regression discontinuity, signaling across different building types is observed. Marketing benefits due to LEED certification drives organizations to build "greener" buildings by upgrading buildings at the thresholds to reach certification levels.

  18. 76 FR 11286 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

    Science.gov (United States)

    2011-03-01

    ... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: 2011 Adverse Effect Wage Rates, Allowable Charges for Agricultural Workers' Meals, and Maximum Travel Subsistence Reimbursement AGENCY...

  19. Certification and beyond DINI open access activities in Germany

    CERN Multimedia

    CERN. Geneva; Scholze, Frank

    2005-01-01

    Local publication servers are common and at the same time highly fragmented in Germany. To bring them to greater success it is necessary to standardize further developments. DINI with its publication "Electronic Publishing in Higher Education" laid a foundation for a widespread introduction of general regulations and standards concerning electronic publishing and archiving of scientific documents in institutional repositories. The DINI-Certificate "Document and Publication Repositories" takes this a step further by clearly describing criteria, that will guarantee repositories to be set up and operated according to national standards and international developments. Repositories fulfilling these criteria may be awarded a certificate, testifying to their quality. The DINI certificate may also help their operators to market the institutional repository as a reliable service to support electronic publishing as well as self- archiving at their institution. In parallel to this quality of service activities DINI star...

  20. Renewable Energy Certificate Program

    Energy Technology Data Exchange (ETDEWEB)

    Gwendolyn S. Andersen

    2012-07-17

    This project was primarily to develop and implement a curriculum which will train undergraduate and graduate students at the University seeking a degree as well as training for enrollees in a special certification program to prepare individuals to be employed in a broad range of occupations in the field of renewable energy and energy conservation. Curriculum development was by teams of Saint Francis University Faculty in the Business Administration and Science Departments and industry experts. Students seeking undergraduate and graduate degrees are able to enroll in courses offered within these departments which will combine theory and hands-on training in the various elements of wind power development. For example, the business department curriculum areas include economic modeling, finance, contracting, etc. The science areas include meteorology, energy conversion and projection, species identification, habitat protection, field data collection and analysis, etc.

  1. U.S. licensing process and ABWR certification

    International Nuclear Information System (INIS)

    Quirk, J.F.; Williams, W.A.

    1996-01-01

    Part 50 of Title 10 of the Code of Federal Regulation (CFR) establishes a two-step licensing process by which the U.S. Nuclear Regulatory Committee (NRC) authorizes nuclear reactor plant construction through issuance of a construction permit and authorizes operation by issuance of an operating license. At each stage, the NRC Staff conducts technical reviews and there is potential for public hearings. In 1989, the NRC issued a new, simplified licensing process: Part 52. The purpose of the Part 52 licensing process is to provide a regulatory framework that brings about earlier resolution of licensing issues. Because issues are not resolved early in the Part 50 licensing process, approval of an operating license is not assured until after a significant investment has been made in the plant. Part 52 increases the stability and certainty of the licensing process by providing for the early resolution of safety and environmental issues. The Part 52 licensing process features (1) early site permits, (2) design certification, and (3) combined construction permit and operating licenses. As part of the U.S. Advanced Light Water Reactor (ALWR) Program to revitalize the nuclear option through the integration of government/utility/industry efforts, GE undertook the role of applying for certification for its latest product line, the Advanced Boiling Water Reactor (ABWR), under the U.S. ABWR certification program. The ABWR design is an essentially complete plant. Initial application for design certification was in 1987 under Part 50. GE reapplied in late 1991 under the newly promulgated Part 52. Following seven years of intensive interactions with the NRC and ACRS, GE was awarded the first Final Design Approval (FDA) under Part 52. The Commission initiated rulemaking by publishing the proposed ABWR Certification Rule in the Federal Register in early 1995. Certification is anticipated mid-1996. (J.P.N.)

  2. 40 CFR 745.89 - Firm certification.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Firm certification. 745.89 Section 745... § 745.89 Firm certification. (a) Initial certification. (1) Firms that perform renovations for compensation must apply to EPA for certification to perform renovations or dust sampling. To apply, a firm must...

  3. Maximum Entropy in Drug Discovery

    Directory of Open Access Journals (Sweden)

    Chih-Yuan Tseng

    2014-07-01

    Full Text Available Drug discovery applies multidisciplinary approaches either experimentally, computationally or both ways to identify lead compounds to treat various diseases. While conventional approaches have yielded many US Food and Drug Administration (FDA-approved drugs, researchers continue investigating and designing better approaches to increase the success rate in the discovery process. In this article, we provide an overview of the current strategies and point out where and how the method of maximum entropy has been introduced in this area. The maximum entropy principle has its root in thermodynamics, yet since Jaynes’ pioneering work in the 1950s, the maximum entropy principle has not only been used as a physics law, but also as a reasoning tool that allows us to process information in hand with the least bias. Its applicability in various disciplines has been abundantly demonstrated. We give several examples of applications of maximum entropy in different stages of drug discovery. Finally, we discuss a promising new direction in drug discovery that is likely to hinge on the ways of utilizing maximum entropy.

  4. Verifying generator waste certification: NTS waste characterization QA requirements

    International Nuclear Information System (INIS)

    Williams, R.E.; Brich, R.F.

    1988-01-01

    Waste management activities managed by the US Department of Energy (DOE) at the Nevada Test Site (NTS) include the disposal of low-level wastes (LLW) and mixed waste (MW), waste which is both radioactive and hazardous. A majority of the packaged LLW is received from offsite DOE generators. Interim status for receipt of MW at the NTS Area 5 Radioactive Waste Management Site (RWMS) was received from the state of Nevada in 1987. The RWMS Mixed Waste Management Facility (MWMF) is expected to be operational in 1988 for approved DOE MW generators. The Nevada Test Site Defense Waste Acceptance Criteria and Certification Requirements (NVO-185, Revision 5) delineates waste acceptance criteria for waste disposal at the NTS. Regulation of the hazardous component of mixed waste requires the implementation of US Environmental Protection Agency (EPA) requirements pursuant to the Resource Conservation and Recovery Act (RCRA). Waste generators must implement a waste certification program to provide assurance that the disposal site waste acceptance criteria are met. The DOE/Nevada Operations Office (NV) developed guidance for generator waste certification program plans. Periodic technical audits are conducted by DOE/NV to assess performance of the waste certification programs. The audit scope is patterned from the waste certification program plan guidance as it integrates and provides a common format for the applicable criteria. The criteria focus on items and activities critical to processing, characterizing, packaging, certifying, and shipping waste

  5. Tiebreaker: Certification and Multiple Credit Ratings

    OpenAIRE

    Dion Bongaerts; K.J. Martijn Cremers; William N. Goetzmann

    2009-01-01

    textabstract Abstract: This paper explores the role played by multiple credit rating agencies (CRAs) in the market for corporate bonds. Moody’s, S&P and Fitch operate in a competitive setting with market demand for both credit information and the certification value of a high rating. We empirically document the outcome of this competitive interaction over the period 2002 to 2007. Virtually all bonds in our sample are rated by both Moody’s and Standard and Poors (S&P), and between 40% and 60% ...

  6. The NTE and Teacher Certification

    Science.gov (United States)

    McDaniel, Thomas R.

    1977-01-01

    Although in U.S. v. State of South Carolina the Court has established important guidelines legitimating the use of validated National Teacher Examination scores in the certification of teachers, some problems and questions remain. (Author/IRT)

  7. 12 CFR 908.23 - Good faith certification.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Good faith certification. 908.23 Section 908.23... OPERATIONS RULES OF PRACTICE AND PROCEDURE IN HEARINGS ON THE RECORD General Rules § 908.23 Good faith... filing or submission of record is well-grounded in fact and is warranted by existing law or a good faith...

  8. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80 + trademark Standard Design. This volume 11 discusses Radiation Protection, Conduct of Operations, and the Initial Test Program

  9. 75 FR 56857 - Pilot, Flight Instructor, and Pilot School Certification

    Science.gov (United States)

    2010-09-17

    ...-2006-26661; Amendment No., 141-14] RIN 2120-AI86 Pilot, Flight Instructor, and Pilot School..., certification, and operating requirements for pilots, flight instructors, ground instructors, and pilot schools...: Background On August 21, 2009, the FAA published the ``Pilot, Flight Instructor, and Pilot School...

  10. 47 CFR 80.953 - Inspection and certification.

    Science.gov (United States)

    2010-10-01

    ... date on which it is placed in service. (b) An inspection and certification of a ship subject to the... must be recorded in the ship's radiotelephone log and include: (1) The date the inspection was... part and has successfully passed the inspection. (c) The vessel owner, operator, or ship's master must...

  11. 78 FR 3311 - Safety Enhancements, Certification of Airports

    Science.gov (United States)

    2013-01-16

    ...-airport employees such as Fixed-Base Operators (FBO) or airline mechanics.\\2\\ The FAA intended to propose.... The existing level of training indicates that as a group certificated airports are willing to conduct...) What constitutes acceptable friction levels; (iv) What is an acceptable testing frequency; (v) Are...

  12. Assuring the Quality of Licensing and Certification Programs.

    Science.gov (United States)

    Shimberg, Benjamin

    When one considers the importance and social significance of licensing and certification examinations, it is amazing that the enterprise operates with virtually no societal oversight. The "Standards for Educational and Psychological Testing" and the "Code of Fair Testing Practices in Education" of the American Psychological…

  13. 47 CFR 76.914 - Revocation of certification.

    Science.gov (United States)

    2010-10-01

    ...) A franchising authority's certification shall be revoked if: (1) After the franchising authority has... regulations governing cable rates. (2) After being given an opportunity to cure the defect, a franchising... the franchising authority regarding the corrective action that may be taken. (c) A cable operator may...

  14. 76 FR 5510 - Safety Enhancements Part 139, Certification of Airports

    Science.gov (United States)

    2011-02-01

    ... Control System (SMGCS) is a system of lighting, signs, and markings that allows an aircraft to operate to... also require a Surface Movement Guidance Control System (SMGCS) plan if the certificate holder conducts... time pressure, creates an environment for injuries and aircraft damage. Errors occur because of...

  15. 14 CFR 139.203 - Contents of Airport Certification Manual.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Contents of Airport Certification Manual. 139.203 Section 139.203 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... succession of airport operational responsibility X X X X 2. Each current exemption issued to the airport from...

  16. 9 CFR 2.78 - Health certification and identification.

    Science.gov (United States)

    2010-01-01

    ... instrumentality of the United States or of any State or local government shall deliver to any intermediate handler..., operator of an auction sale, or department, agency, or instrumentality of the United States or any State or... for Small Animals (APHIS Form 7001) may be used for health certification by a licensed veterinarian as...

  17. System certification: An alternative to package certification?

    International Nuclear Information System (INIS)

    Luna, R.E.; Jefferson, R.J.

    1991-01-01

    One precept of the current radioactive material transportation regulations is that the package is the primary protection for the public. A packaging is chosen to provide containment, shielding, and criticality control suitable to the quantity and characteristics of the radionuclide being transported. Occasionally, radioactive materials requiring transport are not of a mass or size that would allow the materials to be shipped in an appropriate packaging. Where the shipment to be made is relatively infrequent, there may be economic and time penalties that may hamper shipment or force the shipper into uneconomic or high risk options. However, there is recognition of such situations in the International Atomic Energy Agency (IAEA) regulations under the provisions for Special Arrangement. The principal paragraphs defining Special Arrangement in Regulations for the Safe of Radioactive Material; Safety Series 6 (SS6) [IAEA, 1990a] are 141, 211, 720, and 727. In the US regulations the applicable term is ''Exemption.'' An exemption is obtained from either the United States Department of Transportation (USDOT) or the United States Nuclear Regulatory Commission (USNRC) depending on the character of the needed exemption. The essential concept is that some requirements of the regulations that apply in a given situation are not required if the shipment is subjected to other operational controls that provide an equivalent level of risk to that attained if the regulations were observed fully. This paper deals primarily with changing of packaging requirements in Special Arrangements, but it is also true that operational requirements also may be changed as a result of an Exemption or Special Arrangement approval by a regulatory authority

  18. Maximum stellar iron core mass

    Indian Academy of Sciences (India)

    60, No. 3. — journal of. March 2003 physics pp. 415–422. Maximum stellar iron core mass. F W GIACOBBE. Chicago Research Center/American Air Liquide ... iron core compression due to the weight of non-ferrous matter overlying the iron cores within large .... thermal equilibrium velocities will tend to be non-relativistic.

  19. Maximum entropy beam diagnostic tomography

    International Nuclear Information System (INIS)

    Mottershead, C.T.

    1985-01-01

    This paper reviews the formalism of maximum entropy beam diagnostic tomography as applied to the Fusion Materials Irradiation Test (FMIT) prototype accelerator. The same formalism has also been used with streak camera data to produce an ultrahigh speed movie of the beam profile of the Experimental Test Accelerator (ETA) at Livermore. 11 refs., 4 figs

  20. Maximum entropy beam diagnostic tomography

    International Nuclear Information System (INIS)

    Mottershead, C.T.

    1985-01-01

    This paper reviews the formalism of maximum entropy beam diagnostic tomography as applied to the Fusion Materials Irradiation Test (FMIT) prototype accelerator. The same formalism has also been used with streak camera data to produce an ultrahigh speed movie of the beam profile of the Experimental Test Accelerator (ETA) at Livermore

  1. A portable storage maximum thermometer

    International Nuclear Information System (INIS)

    Fayart, Gerard.

    1976-01-01

    A clinical thermometer storing the voltage corresponding to the maximum temperature in an analog memory is described. End of the measurement is shown by a lamp switch out. The measurement time is shortened by means of a low thermal inertia platinum probe. This portable thermometer is fitted with cell test and calibration system [fr

  2. Neutron spectra unfolding with maximum entropy and maximum likelihood

    International Nuclear Information System (INIS)

    Itoh, Shikoh; Tsunoda, Toshiharu

    1989-01-01

    A new unfolding theory has been established on the basis of the maximum entropy principle and the maximum likelihood method. This theory correctly embodies the Poisson statistics of neutron detection, and always brings a positive solution over the whole energy range. Moreover, the theory unifies both problems of overdetermined and of underdetermined. For the latter, the ambiguity in assigning a prior probability, i.e. the initial guess in the Bayesian sense, has become extinct by virtue of the principle. An approximate expression of the covariance matrix for the resultant spectra is also presented. An efficient algorithm to solve the nonlinear system, which appears in the present study, has been established. Results of computer simulation showed the effectiveness of the present theory. (author)

  3. Developing an interdisciplinary certificate program in transportation planning, phase 2 : the eCertificate.

    Science.gov (United States)

    2011-11-01

    This proposal extends the delivery of the recently developed graduate Certificate in Transportation : Planning to a wider audience through the establishment of an Executive Certificate Program by distance : (eCertificate). While the need for an inter...

  4. Ethylene Production Maximum Achievable Control Technology (MACT) Compliance Manual

    Science.gov (United States)

    This July 2006 document is intended to help owners and operators of ethylene processes understand and comply with EPA's maximum achievable control technology standards promulgated on July 12, 2002, as amended on April 13, 2005 and April 20, 2006.

  5. System certification progress in concept recognition in IAEA regulation

    International Nuclear Information System (INIS)

    Luna, R.E.; Pollog, T.

    1995-01-01

    System Certification is a regulatory concept which is intended to expand the scope of radioactive material transport regulations by allowing alternative means for proving compliance with the requisite standards of safety set out in transport regulations. In practice it may allow more stringent requirements in one aspect of the regulations to be substituted for less stringent application in other areas so long as the safety standard provided by regulation is preserved. The concept is widely perceived as the imposition of operational controls in exchange for relaxation of packaging standards, but that is only one possibility in the spectrum of potential actions under a System Certification provision in IAEA or national regulations

  6. User-Driven Quality Certification of Workplace Software, the UsersAward Experience

    National Research Council Canada - National Science Library

    Walldius, Ake; Sundblad, Yngve; Bengtsson, Lars; Lind, Torbjorn; Sandblad, Bengt

    2004-01-01

    This paper summarizes activities and results from the quality assessment project ITQ, "Quality certification of IT support at work", which was performed by Swedish researchers in close co-operation...

  7. 40 CFR 91.112 - Requirement of certification-adjustable parameters.

    Science.gov (United States)

    2010-07-01

    ... adjustment in the physically available range. (b) An operating parameter is not considered adjustable if it... adjustable range during certification, production line testing, selective enforcement auditing or any in-use...

  8. Year 2000 Certification of Mission-Critical DoD Information Technology Systems

    National Research Council Canada - National Science Library

    1998-01-01

    Our objective was to determine whether the year 2000 certification process is adequate to ensure that mission critical DoD information technology systems will continue to operate properly after the year 2000...

  9. 45 CFR 170.457 - Authorized testing and certification methods.

    Science.gov (United States)

    2010-10-01

    ... TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT...

  10. The electricity certificate system, 2008

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    The electricity certificate system is now in its sixth year. Since the start, both the system and the market have developed, and have undergone a number of changes. In January 2007, the Swedish Energy Agency published a report on the system, 'The electricity certificate system, 2006', to provide easily accessible information on the development of the system and to improve general understanding of it. With the passing of another year, it is now time for the third edition, 'The electricity certificate system, 2008', describing the market status of the electricity certificate system, with statistics from 2003 to 2007. This year's special theme chapter describes current support systems for renewable electricity production throughout the EU. The report also contains expanded information and statistics on biofuels, together with a new chapter that describes planned expansion of renewable electricity production up to 2012. The chapter on consumers' contribution to renewable electricity production has also been updated. A new feature this year is provided in the form of a number of tables at the end of the report, complementing the text. Through annual publication of the report, we hope to create a means of continuously developing the statistical material and analyses, in order to assist those involved in the market, and all other interested persons, to follow achievement of the objectives set out in the Government's Bill No. 205/06:154, 'Renewable electricity with green certificates'. We welcome views on the content and presentation of the report in order further to improve it. The target for the certificate system is to increase, by 2016, the annual production of electricity from renewable sources by 17 TWh relative to its production in 2002. So far, the actual production of renewable electricity is less than the indicative stage target for 2007. Nevertheless, progress is regarded as good, as there are many planned projects

  11. Framework for Certification of Fish Propagation, Protection and Monitoring Facilities. Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Carlson, Thomas J.; Costello, Ronald J.

    1997-06-01

    A conceptual framework for certification of fish production and monitoring facilities including software templates to expedite implementation of the framework are presented. The framework is based on well established and widely utilized project management techniques. The implementation templates are overlays for Microsoft Professional Office software products: Excel, Word, and Project. Use of the software templates requires Microsoft Professional Office. The certification framework integrates two classical project management processes with a third process for facility certification. These processes are: (1) organization and definition of the project, (2) acquisition and organization of project documentation, and (3) facility certification. The certification process consists of systematic review of the production processes and the characteristics of the produced product. The criteria for certification review are the plans and specifications for the products and production processes that guided development of the facility. The facility is certified when the production processes are operating as designed and the product produced meets specifications. Within this framework, certification is a performance based process, not dissimilar from that practiced in many professions and required for many process, or a product meets professional/industry standards of performance. In the case of fish production facilities, the certifying authority may be diffuse, consisting of many entities acting through a process such as NEPA. A cornerstone of certification is accountability, over the long term, for the operation and products of a facility. This is particularly important for fish production facilities where the overall goal of the facility may require decades to accomplish.

  12. On Maximum Entropy and Inference

    Directory of Open Access Journals (Sweden)

    Luigi Gresele

    2017-11-01

    Full Text Available Maximum entropy is a powerful concept that entails a sharp separation between relevant and irrelevant variables. It is typically invoked in inference, once an assumption is made on what the relevant variables are, in order to estimate a model from data, that affords predictions on all other (dependent variables. Conversely, maximum entropy can be invoked to retrieve the relevant variables (sufficient statistics directly from the data, once a model is identified by Bayesian model selection. We explore this approach in the case of spin models with interactions of arbitrary order, and we discuss how relevant interactions can be inferred. In this perspective, the dimensionality of the inference problem is not set by the number of parameters in the model, but by the frequency distribution of the data. We illustrate the method showing its ability to recover the correct model in a few prototype cases and discuss its application on a real dataset.

  13. Maximum Water Hammer Sensitivity Analysis

    OpenAIRE

    Jalil Emadi; Abbas Solemani

    2011-01-01

    Pressure waves and Water Hammer occur in a pumping system when valves are closed or opened suddenly or in the case of sudden failure of pumps. Determination of maximum water hammer is considered one of the most important technical and economical items of which engineers and designers of pumping stations and conveyance pipelines should take care. Hammer Software is a recent application used to simulate water hammer. The present study focuses on determining significance of ...

  14. Maximum Gene-Support Tree

    Directory of Open Access Journals (Sweden)

    Yunfeng Shan

    2008-01-01

    Full Text Available Genomes and genes diversify during evolution; however, it is unclear to what extent genes still retain the relationship among species. Model species for molecular phylogenetic studies include yeasts and viruses whose genomes were sequenced as well as plants that have the fossil-supported true phylogenetic trees available. In this study, we generated single gene trees of seven yeast species as well as single gene trees of nine baculovirus species using all the orthologous genes among the species compared. Homologous genes among seven known plants were used for validation of the finding. Four algorithms—maximum parsimony (MP, minimum evolution (ME, maximum likelihood (ML, and neighbor-joining (NJ—were used. Trees were reconstructed before and after weighting the DNA and protein sequence lengths among genes. Rarely a gene can always generate the “true tree” by all the four algorithms. However, the most frequent gene tree, termed “maximum gene-support tree” (MGS tree, or WMGS tree for the weighted one, in yeasts, baculoviruses, or plants was consistently found to be the “true tree” among the species. The results provide insights into the overall degree of divergence of orthologous genes of the genomes analyzed and suggest the following: 1 The true tree relationship among the species studied is still maintained by the largest group of orthologous genes; 2 There are usually more orthologous genes with higher similarities between genetically closer species than between genetically more distant ones; and 3 The maximum gene-support tree reflects the phylogenetic relationship among species in comparison.

  15. LCLS Maximum Credible Beam Power

    International Nuclear Information System (INIS)

    Clendenin, J.

    2005-01-01

    The maximum credible beam power is defined as the highest credible average beam power that the accelerator can deliver to the point in question, given the laws of physics, the beam line design, and assuming all protection devices have failed. For a new accelerator project, the official maximum credible beam power is determined by project staff in consultation with the Radiation Physics Department, after examining the arguments and evidence presented by the appropriate accelerator physicist(s) and beam line engineers. The definitive parameter becomes part of the project's safety envelope. This technical note will first review the studies that were done for the Gun Test Facility (GTF) at SSRL, where a photoinjector similar to the one proposed for the LCLS is being tested. In Section 3 the maximum charge out of the gun for a single rf pulse is calculated. In Section 4, PARMELA simulations are used to track the beam from the gun to the end of the photoinjector. Finally in Section 5 the beam through the matching section and injected into Linac-1 is discussed

  16. Current experience concerning Romanian green certificates market functioning

    International Nuclear Information System (INIS)

    Vladescu, Gherghina; Lupului, Luminita; Vasilevschi, Constantin; Ghinea, Smaranda

    2006-01-01

    The renewable energy sources are promoted by their beneficial use, namely: - diversification of energy sources for producing electric power; - reduction of pollution produced by fossil fuel burning; - reduction of gas releases producing the greenhouse effects, etc. Currently, most of the renewable energy sources cannot concur on electric power free market because of the high costs of implied investments. To ensure an efficient use of renewable energy sources in electricity production and to maintain the installations implied on the electric power market, it is necessary to implement a system able to produce an output greater than that obtained from electric energy selling. The Romanian Government chose to promote the electric energy production by renewable energy sources by using the green certificate trading system. This system ensures the progress in developing the technologies employed in electric energy production from renewable energy sources and, at the same time the costs implied by their promotion can be adjusted by market mechanisms what will reduce the effects upon the electric energy consumers. The paper presents the legislation frame existing in Romania for promoting the electric energy produced from renewable energy sources, the green certificate trading system applied in Romania, as well as, the role shared by the entities implied in operation and development of the system. In November 2005, a first transaction with green certificates on controlled green certificate market in Romania took place. Analyzed is the evolution of the green certificate market registered so far from its inception, as well as, the lessons learned so far from the experience acquired

  17. Certification of Corporate Social Responsibility in EU and China

    Directory of Open Access Journals (Sweden)

    Eva Abramuszkinová Pavlíková

    2015-01-01

    Full Text Available Corporate social responsibility is reflected in environmental, social, economic, stakeholder and voluntariness dimensions. It had become an important topic for European agenda where CSR is considered as a concept whereby companies integrate social and environmental concerns in their business operations and interact with stakeholders on a voluntary basis. In general, it is the responsibility of enterprises for their impact on society. CSR and its certification is important not only for EU but also for out-European business partners such as China. This paper is focused on EU agenda related to CSR, certification, SA8000 standard and the case study of China in relation to SA8000. The results show that the interest in obtaining of SA8000 certificate has risen up to 3231 companies in 2013. European certified companies are represented by 1583 in 2013. The most developing regions in terms of SA8000 certification are Europe and Central Asia, resp. Europe, South Asia and East Asia and the Pacific. In Europe, the most SA8000 certified country is Italy with one third of certifications from the whole world. From out- European countries leading role is taken by India and China. China is the world biggest exporter in the apparel branch which has also the highest number of SA8000 certified companies.

  18. Waste certification review program at the Savannah River Site

    International Nuclear Information System (INIS)

    Faulk, G.W.; Kinney, J.C.; Knapp, D.C.; Burdette, T.E.

    1996-01-01

    After approving the waste certification programs for 45 generators of low-level radioactive and mixed waste, Westinghouse Savannah River Company (WSRC) moved forward to implement a performance-based approach for assuring that approved waste generators maintain their waste certification programs. WSRC implemented the Waste Certification Review Program, which is comprised of two sitewide programs, waste generator self-assessments and Facility Evaluation Board reviews, integrated with the WSRC Solid Waste Management Department Waste Verification Program Evaluations. The waste generator self-assessments ensure compliance with waste certification requirements, and Facility Evaluation Board reviews provide independent oversight of generators' waste certification programs. Waste verification evaluations by the TSD facilities serve as the foundation of the program by confirming that waste contents and generator performance continue to meet waste acceptance criteria (WSRC 1994) prior to shipment to treatment, storage, and disposal facilities. Construction of the Savannah River Site (SRS) was started by the US Government in 1950. The site covers approximately 300 square miles located along the Savannah River near Aiken, South Carolina. It is operated by the US Department of Energy (DOE). Operations are conducted by managing and operating contractors, including the Westinghouse Savannah River Company (WSRC). Historically, the primary purpose of the SRS was to produce special nuclear materials, primarily plutonium and tritium. In general, low-level radioactive and mixed waste is generated through activities in operations. Presently, 47 SRS facilities generate low-level radioactive and mixed waste. The policies, guidelines, and requirements for managing these wastes are determined by DOE and are reflected in DOE Order 5820.2A (US DOE 1988)

  19. The electricity certificate system, 2007

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    The electricity certificate system is a market based support system to assist the expansion of electricity production in Sweden from renewable energy sources and peat. Its objective is to increase the production of electricity from such sources by 17 TWh by 2016 relative to the production level in 2002. It is part of the country's overall objective of moving Sweden towards a more ecologically sustainable energy system. This report describes the market status of the electricity certificate system, and includes statistics from 2003 to 2006. It is our aim to create a forum for continuously developing the statistical material and analyses, in order to assist those involved in the market, and all other interested persons, to follow achievement of the objectives set out in the Government's Bill No. 2005/06:154, Renewable Electricity with Green Certificates. It is also our aim that, in future, each issue of the report should include a more in depth theme article on some particular subject. This year the report provides expanded information and statistics on wind power. Electricity certificates are issued to those who produce electricity from various renewable energy sources, and from peat, and who have had their production plants approved by the Swedish Energy Agency. To date, certificates have been issued to producers of electricity from biofuels and peat, wind power, hydro power and solar energy. Production from the renewable sources amounted to 11.6 TWh in 2006, which is 5.1 TWh more than corresponding production in 2002

  20. AutoCAD 2014 review for certification official certification preparation

    CERN Document Server

    ASCENT center for technical knowledge

    2014-01-01

    The AutoCAD® 2014 Review for Certification book is intended for users of AutoCAD® preparing to complete the AutoCAD 2014 Certified Professional exam. This book contains a collection of relevant instructional topics, practice exercises, and review questions from the Autodesk Official Training Guides (AOTG) from ASCENT - Center for Technical Knowledge pertaining specifically to the Certified Professional exam topics and objectives. This book is intended for experienced users of AutoCAD in preparation for certification. New users of AutoCAD should refer to the AOTG training guides from ASCENT, such as AutoCAD/AutoCAD LT 2014 Fundamentals, for more comprehensive instruction.

  1. Generic maximum likely scale selection

    DEFF Research Database (Denmark)

    Pedersen, Kim Steenstrup; Loog, Marco; Markussen, Bo

    2007-01-01

    in this work is on applying this selection principle under a Brownian image model. This image model provides a simple scale invariant prior for natural images and we provide illustrative examples of the behavior of our scale estimation on such images. In these illustrative examples, estimation is based......The fundamental problem of local scale selection is addressed by means of a novel principle, which is based on maximum likelihood estimation. The principle is generally applicable to a broad variety of image models and descriptors, and provides a generic scale estimation methodology. The focus...

  2. Validity of parental work information on the birth certificate

    Directory of Open Access Journals (Sweden)

    Langlois Peter H

    2008-03-01

    business or financial operations (0% and highest for occupations in food preparation and serving (30%. Conclusion Sensitivity of occupation/industry information on birth certificates varies although the specificity of such information may exceed 95%. Quality of this information also varies by maternal and paternal occupation with misclassification as homemaker a limiting factor among maternal and missing information a limiting factor among paternal work information.

  3. Online Information Technologies Certificate Program

    Directory of Open Access Journals (Sweden)

    Erman YUKSELTURK

    2005-01-01

    Full Text Available Online Information Technologies Certificate Program Res. Ass. Erman YUKSELTURK Middle East Technical University Department of Computer Education and Instructional Technology, Faculty of Education, Ankara, TURKEY ABSTRACT In this study, Information Technologies Certificate Program which is based on synchronous and asynchronous communication methods over the Internet offered by cooperation of Middle East Technical University, Computer Engineering Department and Continuing Education Center were examined. This online certificate program started in May 1998 and it is still active. The program includes eight fundamental courses of Computer Engineering Department and comprised of four semesters lasting totally nine months. The main aim of this program is to train the participants in IT field to meet demand in the field of computer technologies in Turkey. As a conclusion, the properties of this program were discussed in a detailed way.

  4. Extreme Maximum Land Surface Temperatures.

    Science.gov (United States)

    Garratt, J. R.

    1992-09-01

    There are numerous reports in the literature of observations of land surface temperatures. Some of these, almost all made in situ, reveal maximum values in the 50°-70°C range, with a few, made in desert regions, near 80°C. Consideration of a simplified form of the surface energy balance equation, utilizing likely upper values of absorbed shortwave flux (1000 W m2) and screen air temperature (55°C), that surface temperatures in the vicinity of 90°-100°C may occur for dry, darkish soils of low thermal conductivity (0.1-0.2 W m1 K1). Numerical simulations confirm this and suggest that temperature gradients in the first few centimeters of soil may reach 0.5°-1°C mm1 under these extreme conditions. The study bears upon the intrinsic interest of identifying extreme maximum temperatures and yields interesting information regarding the comfort zone of animals (including man).

  5. Open source systems security certification

    CERN Document Server

    Damiani, Ernesto; El Ioini, Nabil

    2009-01-01

    Open Source Advances in Computer Applications book series provides timely technological and business information for: Enabling Open Source Systems (OSS) to become an integral part of systems and devices produced by technology companies; Inserting OSS in the critical path of complex network development and embedded products, including methodologies and tools for domain-specific OSS testing (lab code available), plus certification of security, dependability and safety properties for complex systems; Ensuring integrated systems, including OSS, meet performance and security requirements as well as achieving the necessary certifications, according to the overall strategy of OSS usage on the part of the adopter

  6. An exploratory assessment of the attitudes of Chinese wood products manufacturers towards forest certification.

    Science.gov (United States)

    Chen, Juan; Innes, John L; Kozak, Robert A

    2011-11-01

    Interviews with Chinese forest products manufacturers were conducted to explore their attitudes towards forest certification and related issues. Participants comprised owners, CEOs, and managers in 20 Chinese wood products companies, including producers of furniture, doors, flooring, and various engineered wood products. The interviews were used to analyze the extent to which participants were considering adopting forest certification and what might motivate such a decision. This was done by assessing their awareness and knowledge of certification. The results indicated that participants' understanding of forest certification was extremely low, despite major efforts in China to raise awareness of the issue. Potential economic benefits were the most frequently cited reason to adopt certification, including gaining or maintaining competitive advantage over their industry counterparts, improved access to both domestic and export markets, better customer recognition, and enhanced corporate responsibility practices. Some interviewees (3 out of 20) considered that certification would become a mandatory requirement or industry standard, and that this would be the only viable motivation for certification given that the financial benefits were potentially limited. According to the participants, the main differences between certified and uncertified wood products operations related to improved market access and public image. Interviewees felt that cooperation between and support from governments and the forest industry would enable the enhanced awareness of certification amongst manufacturers and the general public. This, in turn, could serve to stimulate demand for certified products. Copyright © 2011 Elsevier Ltd. All rights reserved.

  7. 14 CFR 141.25 - Business office and operations base.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Business office and operations base. 141.25... operations base. (a) Each holder of a pilot school or a provisional pilot school certificate must maintain a... or the operations base, each certificate holder must notify the FAA Flight Standards District Office...

  8. Modelling maximum likelihood estimation of availability

    International Nuclear Information System (INIS)

    Waller, R.A.; Tietjen, G.L.; Rock, G.W.

    1975-01-01

    Suppose the performance of a nuclear powered electrical generating power plant is continuously monitored to record the sequence of failure and repairs during sustained operation. The purpose of this study is to assess one method of estimating the performance of the power plant when the measure of performance is availability. That is, we determine the probability that the plant is operational at time t. To study the availability of a power plant, we first assume statistical models for the variables, X and Y, which denote the time-to-failure and the time-to-repair variables, respectively. Once those statistical models are specified, the availability, A(t), can be expressed as a function of some or all of their parameters. Usually those parameters are unknown in practice and so A(t) is unknown. This paper discusses the maximum likelihood estimator of A(t) when the time-to-failure model for X is an exponential density with parameter, lambda, and the time-to-repair model for Y is an exponential density with parameter, theta. Under the assumption of exponential models for X and Y, it follows that the instantaneous availability at time t is A(t)=lambda/(lambda+theta)+theta/(lambda+theta)exp[-[(1/lambda)+(1/theta)]t] with t>0. Also, the steady-state availability is A(infinity)=lambda/(lambda+theta). We use the observations from n failure-repair cycles of the power plant, say X 1 , X 2 , ..., Xsub(n), Y 1 , Y 2 , ..., Ysub(n) to present the maximum likelihood estimators of A(t) and A(infinity). The exact sampling distributions for those estimators and some statistical properties are discussed before a simulation model is used to determine 95% simulation intervals for A(t). The methodology is applied to two examples which approximate the operating history of two nuclear power plants. (author)

  9. System for memorizing maximum values

    Science.gov (United States)

    Bozeman, Richard J., Jr.

    1992-08-01

    The invention discloses a system capable of memorizing maximum sensed values. The system includes conditioning circuitry which receives the analog output signal from a sensor transducer. The conditioning circuitry rectifies and filters the analog signal and provides an input signal to a digital driver, which may be either linear or logarithmic. The driver converts the analog signal to discrete digital values, which in turn triggers an output signal on one of a plurality of driver output lines n. The particular output lines selected is dependent on the converted digital value. A microfuse memory device connects across the driver output lines, with n segments. Each segment is associated with one driver output line, and includes a microfuse that is blown when a signal appears on the associated driver output line.

  10. Remarks on the maximum luminosity

    Science.gov (United States)

    Cardoso, Vitor; Ikeda, Taishi; Moore, Christopher J.; Yoo, Chul-Moon

    2018-04-01

    The quest for fundamental limitations on physical processes is old and venerable. Here, we investigate the maximum possible power, or luminosity, that any event can produce. We show, via full nonlinear simulations of Einstein's equations, that there exist initial conditions which give rise to arbitrarily large luminosities. However, the requirement that there is no past horizon in the spacetime seems to limit the luminosity to below the Planck value, LP=c5/G . Numerical relativity simulations of critical collapse yield the largest luminosities observed to date, ≈ 0.2 LP . We also present an analytic solution to the Einstein equations which seems to give an unboundedly large luminosity; this will guide future numerical efforts to investigate super-Planckian luminosities.

  11. Maximum mutual information regularized classification

    KAUST Repository

    Wang, Jim Jing-Yan

    2014-09-07

    In this paper, a novel pattern classification approach is proposed by regularizing the classifier learning to maximize mutual information between the classification response and the true class label. We argue that, with the learned classifier, the uncertainty of the true class label of a data sample should be reduced by knowing its classification response as much as possible. The reduced uncertainty is measured by the mutual information between the classification response and the true class label. To this end, when learning a linear classifier, we propose to maximize the mutual information between classification responses and true class labels of training samples, besides minimizing the classification error and reducing the classifier complexity. An objective function is constructed by modeling mutual information with entropy estimation, and it is optimized by a gradient descend method in an iterative algorithm. Experiments on two real world pattern classification problems show the significant improvements achieved by maximum mutual information regularization.

  12. Scintillation counter, maximum gamma aspect

    International Nuclear Information System (INIS)

    Thumim, A.D.

    1975-01-01

    A scintillation counter, particularly for counting gamma ray photons, includes a massive lead radiation shield surrounding a sample-receiving zone. The shield is disassembleable into a plurality of segments to allow facile installation and removal of a photomultiplier tube assembly, the segments being so constructed as to prevent straight-line access of external radiation through the shield into radiation-responsive areas. Provisions are made for accurately aligning the photomultiplier tube with respect to one or more sample-transmitting bores extending through the shield to the sample receiving zone. A sample elevator, used in transporting samples into the zone, is designed to provide a maximum gamma-receiving aspect to maximize the gamma detecting efficiency. (U.S.)

  13. Maximum mutual information regularized classification

    KAUST Repository

    Wang, Jim Jing-Yan; Wang, Yi; Zhao, Shiguang; Gao, Xin

    2014-01-01

    In this paper, a novel pattern classification approach is proposed by regularizing the classifier learning to maximize mutual information between the classification response and the true class label. We argue that, with the learned classifier, the uncertainty of the true class label of a data sample should be reduced by knowing its classification response as much as possible. The reduced uncertainty is measured by the mutual information between the classification response and the true class label. To this end, when learning a linear classifier, we propose to maximize the mutual information between classification responses and true class labels of training samples, besides minimizing the classification error and reducing the classifier complexity. An objective function is constructed by modeling mutual information with entropy estimation, and it is optimized by a gradient descend method in an iterative algorithm. Experiments on two real world pattern classification problems show the significant improvements achieved by maximum mutual information regularization.

  14. Quality management certification for the nuclear industry

    International Nuclear Information System (INIS)

    Wilmer, T.J.

    1993-01-01

    Historically for safety critical items, the United Kingdom nuclear companies either conducted their own inspection and audit of suppliers or sub-contracted staff to do so on their behalf. However, it is becoming unrealistic for these services to be undertaken in-house for economic reasons. The power industry is looking outside its own immediate expertise to that of 3rd Party Certification Bodies. There is a danger of introducing an element of risk unless the Certification Body really does understand the industry and its requirements. The Nuclear Installations Inspectorate (NII) makes it mandatory for nuclear installations to have in place Quality management systems that meet the requirements of BS 5882. This standard requires the use of quality assurance programmes and a greater degree of understanding of nuclear regulations and codes of practice than is required by BS 5750. This is a very significant factor, recognising as it does the need to harmonise the management interface between an operator of a nuclear installation and suppliers to that same installation. (author)

  15. 16 CFR 1207.9 - Product certification.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Product certification. 1207.9 Section 1207.9 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR SWIMMING POOL SLIDES § 1207.9 Product certification. (a) Certification shall be in accordance...

  16. 40 CFR 82.161 - Technician certification.

    Science.gov (United States)

    2010-07-01

    ... shall address the subject areas listed in appendix D. (c) Program Approval. Persons may seek approval of... the closed-book certification exam, within 30 days. Programs providing Type I certification using the... percent or higher on the certification exam, no later than 30 days after the program has received the exam...

  17. Modeling landowner behavior regarding forest certification

    Science.gov (United States)

    David C. Mercker; Donald G. Hodges

    2008-01-01

    Nonindustrial private forest owners in western Tennessee were surveyed to assess their awareness, acceptance, and perceived benefits of forest certification. More than 80 percent of the landowners indicated a willingness to consider certification for their lands. A model was created to explain landowner behavior regarding their willingness to consider certification....

  18. Certification and the Branding of HRD

    Science.gov (United States)

    Carliner, Saul

    2012-01-01

    Although calls continue to establish certification, several certifications for human resource development (HRD) practitioners already exist, although none use the name HRD. This Forum explores what those certification programs are and what their availability means to the development of the HRD "brand" (the impressions of the service derived from…

  19. 48 CFR 33.207 - Contractor certification.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Contractor certification... CONTRACTING REQUIREMENTS PROTESTS, DISPUTES, AND APPEALS Disputes and Appeals 33.207 Contractor certification. (a) Contractors shall provide the certification specified in paragraph (c) of this section when...

  20. Alternative Certification Pathways: Filling a Gap?

    Science.gov (United States)

    Ludlow, Carlyn

    2013-01-01

    The purpose of this article is to examine the proliferation of alternative certification pathways through an analysis of the role and history of teacher certification and supply followed by a synthesis of national, regional, and state research studies on alternative routes to certification programs and a review of studies conducted on well-known…

  1. 40 CFR 85.1406 - Certification.

    Science.gov (United States)

    2010-07-01

    ... POLLUTION FROM MOBILE SOURCES Urban Bus Rebuild Requirements § 85.1406 Certification. (a) Certification... provide some level of particulate emission reduction, and will not cause the urban bus engine to fail to... urban bus engines. (c) Test equipment selection. Certification shall be based upon tests utilizing...

  2. Converse Theorems for Safety and Barrier Certificates

    OpenAIRE

    Ratschan, Stefan

    2017-01-01

    An important tool for proving safety of dynamical systems is the notion of a barrier certificate. In this paper we prove that every robustly safe ordinary differential equation has a barrier certificate. Moreover, we show a construction of such a barrier certificate based on a set of states that is reachable in finite time.

  3. 42 CFR 493.638 - Certificate fees.

    Science.gov (United States)

    2010-10-01

    ... for quality control, quality assurance, and proficiency testing purposes) and specialties tested, with... collected by HHS under the laboratory program must be sufficient to cover the general costs of administering... certificates and certificates of compliance, the costs include issuing the certificates, collecting the fees...

  4. 46 CFR 308.526 - Certificate for repayment of decrease of collateral deposit fund, Form MA-306.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Certificate for repayment of decrease of collateral... TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Cargo Insurance Ii-Open Policy War Risk Cargo Insurance § 308.526 Certificate for repayment of decrease of collateral deposit fund, Form MA-306. The...

  5. Professional Certification in Counseling Psychology.

    Science.gov (United States)

    Fretz, Bruce R.; And Others

    1980-01-01

    Certification procedures protect consumers, but when licensing institutions become monopolistic, alternative paths to credentialing need to be considered. A series of articles examine third party payments, a changing job market and consumer protection concerns, all of which have had an impact on credentialing problems. (JAC)

  6. How to price imperfect certification

    Czech Academy of Sciences Publication Activity Database

    Mysliveček, Jan

    -, č. 364 (2008), s. 1-37 ISSN 1211-3298 R&D Projects: GA MŠk LC542 Grant - others:Univerzita Karlova(CZ) 7743/2007 Institutional research plan: CEZ:AV0Z70850503 Keywords : certification * imperfect testing * competition Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp364.pdf

  7. Probabilistic maximum-value wind prediction for offshore environments

    DEFF Research Database (Denmark)

    Staid, Andrea; Pinson, Pierre; Guikema, Seth D.

    2015-01-01

    statistical models to predict the full distribution of the maximum-value wind speeds in a 3 h interval. We take a detailed look at the performance of linear models, generalized additive models and multivariate adaptive regression splines models using meteorological covariates such as gust speed, wind speed......, convective available potential energy, Charnock, mean sea-level pressure and temperature, as given by the European Center for Medium-Range Weather Forecasts forecasts. The models are trained to predict the mean value of maximum wind speed, and the residuals from training the models are used to develop...... the full probabilistic distribution of maximum wind speed. Knowledge of the maximum wind speed for an offshore location within a given period can inform decision-making regarding turbine operations, planned maintenance operations and power grid scheduling in order to improve safety and reliability...

  8. Maximum entropy and Bayesian methods

    International Nuclear Information System (INIS)

    Smith, C.R.; Erickson, G.J.; Neudorfer, P.O.

    1992-01-01

    Bayesian probability theory and Maximum Entropy methods are at the core of a new view of scientific inference. These 'new' ideas, along with the revolution in computational methods afforded by modern computers allow astronomers, electrical engineers, image processors of any type, NMR chemists and physicists, and anyone at all who has to deal with incomplete and noisy data, to take advantage of methods that, in the past, have been applied only in some areas of theoretical physics. The title workshops have been the focus of a group of researchers from many different fields, and this diversity is evident in this book. There are tutorial and theoretical papers, and applications in a very wide variety of fields. Almost any instance of dealing with incomplete and noisy data can be usefully treated by these methods, and many areas of theoretical research are being enhanced by the thoughtful application of Bayes' theorem. Contributions contained in this volume present a state-of-the-art overview that will be influential and useful for many years to come

  9. 29 CFR 1952.92 - Completion of developmental steps and certification.

    Science.gov (United States)

    2010-07-01

    ... Carolina § 1952.92 Completion of developmental steps and certification. (a) In accordance with § 1952.91(a) legislative amendments were introduced into the 1973 South Carolina General Assembly and were enacted... variances to a maximum of two years, inclusive of any renewals. (b) In accordance with § 1952.91(b) the...

  10. Energy saving certificates: an improved instrument

    International Nuclear Information System (INIS)

    2016-02-01

    This report first presents Energy Saving Certificates as one of among other instruments aimed at reducing energy consumption, and indicates how the French consumer is concerned. The benefits of this instrument are outlined: low cost, autonomy, awareness-raising, quantitative assessment of achieved energy savings. Its objectives and results since its creation in 2006 are commented, and the report outlines that this type of instrument is spreading over Europe. The authors show that its efficiency has been improved along the years due to a periodic review of standardised operation sheets, a simplification of the declaration, and an optimization of related programmes. Besides, targets have been better identified. The report outlines that assessment and controls must however be strengthened in order to reduce financial risks and potential drifts. Answers to this report by the concerned minister and ADEME are provided

  11. Maximum entropy principal for transportation

    International Nuclear Information System (INIS)

    Bilich, F.; Da Silva, R.

    2008-01-01

    In this work we deal with modeling of the transportation phenomenon for use in the transportation planning process and policy-impact studies. The model developed is based on the dependence concept, i.e., the notion that the probability of a trip starting at origin i is dependent on the probability of a trip ending at destination j given that the factors (such as travel time, cost, etc.) which affect travel between origin i and destination j assume some specific values. The derivation of the solution of the model employs the maximum entropy principle combining a priori multinomial distribution with a trip utility concept. This model is utilized to forecast trip distributions under a variety of policy changes and scenarios. The dependence coefficients are obtained from a regression equation where the functional form is derived based on conditional probability and perception of factors from experimental psychology. The dependence coefficients encode all the information that was previously encoded in the form of constraints. In addition, the dependence coefficients encode information that cannot be expressed in the form of constraints for practical reasons, namely, computational tractability. The equivalence between the standard formulation (i.e., objective function with constraints) and the dependence formulation (i.e., without constraints) is demonstrated. The parameters of the dependence-based trip-distribution model are estimated, and the model is also validated using commercial air travel data in the U.S. In addition, policy impact analyses (such as allowance of supersonic flights inside the U.S. and user surcharge at noise-impacted airports) on air travel are performed.

  12. Autodesk Revit Architecture 2014 review for certification official certification preparation

    CERN Document Server

    ASCENT center for technical knowledge

    2014-01-01

    The Autodesk® Revit® Architecture 2014 Review for Certification guide is intended for users of the Autodesk Revit Architecture software who are preparing to complete the Autodesk Revit Architecture 2014 Certified Professional exam. This guide contains a collection of relevant instructional topics, practices, and review questions from the Autodesk Official Training Guides (AOTG) training guides created by ASCENT - Center for Technical Knowledge® and pertaining specifically to the Certified Professional exam topics and objectives. This training guide is intended for experienced users of the Autodesk Revit Architecture software in preparation for certification. New users of the software should refer to the AOTG training guides from ASCENT, such as Autodesk Revit Architecture 2014 Fundamentals, for more comprehensive instruction.

  13. Site operations

    International Nuclear Information System (INIS)

    House, W.B.; Ebenhack, D.G.

    1989-01-01

    This chapter is a discussion of the management and operations practices used at the Barnwell Waste Management Facility in Barnwell, SC. The following topics are discussed: (1) Waste receiving and inspection, including manifest and certificates of compliance, radiological surveys, disposition of nonconforming items, and decontamination and disposition of secondary waste streams; (2) Waste disposal, including Title 10 CFR 61 requirements, disposal area evaluations, shipment offloading, container emplacement, and radiation protection; (3) Trench closure, including trench backfilling, trench capping, and permanent markers; (4) Site maintenance and stabilization, including trench maintenance, surface water management, and site closure activities; (5) Site monitoring programs, including operational monitoring, and environmental monitoring program; (6) Personnel training and qualifications, including basic training program, safety training program, special skills training, and physical qualifications; (7) Records management, including waste records, personnel training records, personnel dosimetry records, site monitoring records, trench qualification and construction records, and site drawings and stabilization records; (8) Site security; (9) Emergency response plans; and (10) Quality assurance

  14. The effectiveness of market-based conservation in the tropics: forest certification in Ecuador and Bolivia.

    Science.gov (United States)

    Ebeling, Johannes; Yasué, Maï

    2009-02-01

    During the last decade, forest certification has gained momentum as a market-based conservation strategy in tropical forest countries. Certification has been promoted to enhance forest management in countries where governance capacities are insufficient to adequately manage natural resources and enforce pertinent regulations, given that certification relies largely on non-governmental organisations and private businesses. However, at present there are few tropical countries with large areas of certified forests. In this study, we conducted semi-structured stakeholder interviews in Ecuador and Bolivia to identify key framework conditions that influence the costs and benefits for companies to switch from conventional to certified forestry operations. Bolivia has a much greater relative area under certified forest management than Ecuador and also significantly more certified producers. The difference in the success of certification between both countries is particularly notable because Bolivia is a poorer country with more widespread corruption, and is landlocked with less access to export routes. Despite these factors, several characteristics of the Bolivian forest industry contribute to lower additional costs of certified forest management compared to Ecuador. Bolivia has stronger government enforcement of forestry regulations a fact that increases the cost of illegal logging, management units are larger, and vertical integration in the process chain from timber extraction to markets is higher. Moreover, forestry laws in Bolivia are highly compatible with certification requirements, and the government provides significant tax benefits to certified producers. Results from this study suggest that certification can be successful in countries where governments have limited governance capacity. However, the economic incentives for certification do not only arise from favourable market conditions. Certification is likely to be more successful where governments enforce

  15. Ministerial Decree of 26 October 1966 concerning Regulations governing the procedure for granting of the clearance certificate prescribed by Section 34 of the Decree of the President of the Republic No. 185 of 13 February 1964 for category B commercial operations concerning ores, source materials and radioactive materials within the meaning of Section 4 of Act No. 1860 of 31 December 1962

    International Nuclear Information System (INIS)

    1966-01-01

    This Decree was made in implementation of DPR No. 185 which prescribes that a clearance certificate will be required from the Ministry of Industry within 30 days of the conclusion of the enquiry concerning the application for such a certificate. (NEA) [fr

  16. The electricity certificate system, 2009

    Energy Technology Data Exchange (ETDEWEB)

    Joehnemark, Maria; Oestberg, Roger; Johansson, Martin

    2009-07-01

    Over the years, the electricity certificate system has been maturing and consolidating, so that it is today an effective and functional policy measure that has won wide acceptance from all parties concerned. The long term approach and security of the system are attracting an increasing number of investors, which is described more fully in this report. This year's special theme chapter, Investing in Renewable Energy, presents the status of the system from an investment point of view. In addition to this chapter, the report includes, as always, an introduction to how the certificate system works, together with an updating with the latest statistics. A quick glance at external factors that can affect the system indicates that there are several that may do so in the future. Just the fact that the climate problem is still high on the political agenda, despite strong competition from economic crises, shows that there is a need for more renewable energy. The EU Renewable Energy Directive, which was adopted at the end of 2008, requires the Swedish energy system to deliver 49 % of its output from renewable sources by 2020. In addition, the Energy Bill adopted by the Swedish Parliament identifies the electricity certificate system as one of the most important means of achieving the country's objectives. Taken together, this indicates that there are many factors that will further strengthen the role of the certificate system in the next few years. If we look at the system itself, we can see that a number of important changes have been made since the previous report. With effect from 1st January 2009, the definition of electricity-intensive industries has changed, bringing it more closely in line with the definition used in energy taxation. Since 1st May, the rules have changed concerning entitlement to a new allocation period of certificates after a plant has been substantially modified. In addition, certificates can now be allocated for increases in output from

  17. Aspects Regarding Quality Assurance, Acreditation and Certification of Romanian Universities

    OpenAIRE

    Condrea Elena; Sârbu Roxana; Rizea Raluca Daniela

    2013-01-01

    It can be said that quality assurance of education has become a major concern of those in charge of educational institutions, but also those responsible for quality assurance of education within the competent ministry (especially in higher education) since the 80s, but especially after 1990. Accreditation and certification have become major objectives of all universities, no matter where they operate, the number of teachers and support staff, students and respectively graduates, geographical ...

  18. Contribution Index Based on Green Building Certification Systems

    OpenAIRE

    Yuting Sun; Bee Hua Goh

    2015-01-01

    Green Building Certification Systems (GBCS) are carried out in many countries due to the rising awareness of the importance of sustainability in the building industry. The intention should have motivated participants to construct and operate buildings sustainably, however, there is not yet a method developed to investigate the motivation of the participants. Based on the GBCS, this paper proposes the contribution index as a standard global method to analyze the performance of participants in ...

  19. Last Glacial Maximum Salinity Reconstruction

    Science.gov (United States)

    Homola, K.; Spivack, A. J.

    2016-12-01

    It has been previously demonstrated that salinity can be reconstructed from sediment porewater. The goal of our study is to reconstruct high precision salinity during the Last Glacial Maximum (LGM). Salinity is usually determined at high precision via conductivity, which requires a larger volume of water than can be extracted from a sediment core, or via chloride titration, which yields lower than ideal precision. It has been demonstrated for water column samples that high precision density measurements can be used to determine salinity at the precision of a conductivity measurement using the equation of state of seawater. However, water column seawater has a relatively constant composition, in contrast to porewater, where variations from standard seawater composition occur. These deviations, which affect the equation of state, must be corrected for through precise measurements of each ion's concentration and knowledge of apparent partial molar density in seawater. We have developed a density-based method for determining porewater salinity that requires only 5 mL of sample, achieving density precisions of 10-6 g/mL. We have applied this method to porewater samples extracted from long cores collected along a N-S transect across the western North Atlantic (R/V Knorr cruise KN223). Density was determined to a precision of 2.3x10-6 g/mL, which translates to salinity uncertainty of 0.002 gms/kg if the effect of differences in composition is well constrained. Concentrations of anions (Cl-, and SO4-2) and cations (Na+, Mg+, Ca+2, and K+) were measured. To correct salinities at the precision required to unravel LGM Meridional Overturning Circulation, our ion precisions must be better than 0.1% for SO4-/Cl- and Mg+/Na+, and 0.4% for Ca+/Na+, and K+/Na+. Alkalinity, pH and Dissolved Inorganic Carbon of the porewater were determined to precisions better than 4% when ratioed to Cl-, and used to calculate HCO3-, and CO3-2. Apparent partial molar densities in seawater were

  20. Maximum Parsimony on Phylogenetic networks

    Science.gov (United States)

    2012-01-01

    Background Phylogenetic networks are generalizations of phylogenetic trees, that are used to model evolutionary events in various contexts. Several different methods and criteria have been introduced for reconstructing phylogenetic trees. Maximum Parsimony is a character-based approach that infers a phylogenetic tree by minimizing the total number of evolutionary steps required to explain a given set of data assigned on the leaves. Exact solutions for optimizing parsimony scores on phylogenetic trees have been introduced in the past. Results In this paper, we define the parsimony score on networks as the sum of the substitution costs along all the edges of the network; and show that certain well-known algorithms that calculate the optimum parsimony score on trees, such as Sankoff and Fitch algorithms extend naturally for networks, barring conflicting assignments at the reticulate vertices. We provide heuristics for finding the optimum parsimony scores on networks. Our algorithms can be applied for any cost matrix that may contain unequal substitution costs of transforming between different characters along different edges of the network. We analyzed this for experimental data on 10 leaves or fewer with at most 2 reticulations and found that for almost all networks, the bounds returned by the heuristics matched with the exhaustively determined optimum parsimony scores. Conclusion The parsimony score we define here does not directly reflect the cost of the best tree in the network that displays the evolution of the character. However, when searching for the most parsimonious network that describes a collection of characters, it becomes necessary to add additional cost considerations to prefer simpler structures, such as trees over networks. The parsimony score on a network that we describe here takes into account the substitution costs along the additional edges incident on each reticulate vertex, in addition to the substitution costs along the other edges which are

  1. Certification of the PSI request for the renewal of the operation license for the Hot Laboratory; Gutachten zum Gesuch des Paul Scherrer Instituts um Erneuerung der Betriebsbewilligung für das Hotlabor

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-03-15

    At the Paul Scherrer Institute (PSI), the Hot Laboratory was built in the years 1961 to 1963 in the former EIR in order to make scientific material analyses on highly radioactive material samples and to prepare diagnostic and therapeutically useful radioisotopes. The 1964 safety report with the request for the granting of the operational warrant was revised for the first time in 2004. Further safety reports and radiation protection plans were produced and accepted by the surveying authorities. The operational regulations were revised and approved on a yearly basis by the PSI direction. The regulations reflect the experience gained in 40 years of safe operation and take new regulations in nuclear energy legislation into account. In the years 2000-2002 the Hot Lab was refitted especially with respect to the fields of radiation and fire protection. Presently, the Hot Lab is used for applied material research on highly radioactive samples which mainly come from nuclear power plants, research reactors and the target stations of the PSI accelerator facilities. The investigations on highly radioactive samples and the handling of large quantities of radioisotopes include the possibility of incidents. The analysis of such incidents shows that the legal safety requirements are satisfied. The Swiss Federal Nuclear Safety Inspectorate (ENSI) requirements concerning the protection of personnel, population and environment, as well as the protection against fire, are fulfilled. In the Hot Lab the principle of barriers for the containment of radioactive materials is applied. Open radioactive sources are manipulated in depressurized cells. The air extracted from the cells is filtered before being released to the environment. In the building, the total amount of radioactive materials is limited in order to reduce the exposition of the population in normal operation as well as in case of incidents, and to avoid criticality accidents. Possible weaknesses in this concept can be shown

  2. In Brief: Science teaching certificate

    Science.gov (United States)

    Showstack, Randy

    2008-11-01

    More than 200 educators will receive fellowships over the next 5 years to participate in NASA's Endeavor Science Teaching Certificate Project, the agency announced on 14 November. Through workshops, online and on-site graduate courses, and NASA educational materials, the project will expose educators to NASA science and engineering and support them in translating the information for use in classrooms. ``Through the program, educators will learn to deliver cutting-edge science into the classroom, promoting science, technology, engineering, and mathematics education,'' according to Joyce Winterton, assistant administrator for education at NASA Headquarters, in Washington, D. C. Project fellows will earn a certificate from Teachers College Innovations at Teachers College, Columbia University, New York, and graduate credit from other institutional partners. For more information, visit http://education.nasa.gov/home/index.html.

  3. Fairtrade certification, conventions and labor

    DEFF Research Database (Denmark)

    Riisgaard, Lone

    2015-01-01

    This chapter explores the potential of Fairtrade in hired labour situations in terms of improving conditions for agricultural workers. The chapter will address various aspects including the contentious issue of Fairtrade and trade union organisation as well as on issues of worker empowerment....... At a local level, analysis focuses on the implications of Fairtrade certification for large enterprises and workers, drawing on a field-based studies of certified flower farms in Ecuador and Kenya....

  4. Two-dimensional maximum entropy image restoration

    International Nuclear Information System (INIS)

    Brolley, J.E.; Lazarus, R.B.; Suydam, B.R.; Trussell, H.J.

    1977-07-01

    An optical check problem was constructed to test P LOG P maximum entropy restoration of an extremely distorted image. Useful recovery of the original image was obtained. Comparison with maximum a posteriori restoration is made. 7 figures

  5. 46 CFR 91.60-40 - Duration of Convention certificates.

    Science.gov (United States)

    2010-10-01

    ... VESSELS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea... period of not more than 60 months. (1) A Cargo Ship Safety Construction Certificate. (2) A Cargo Ship Safety Equipment Certificate. (3) A Safety Management Certificate. (4) A Cargo Ship Safety Radio...

  6. Certification Manual for Wisconsin Public Librarians. Bulletin No. 94111.

    Science.gov (United States)

    Lamb, Donald K.

    This manual contains the guidelines and procedures for public librarian certification and certification renewal in Wisconsin. Certification is not required for library personnel other than administrators, but nonadministrators may apply for certification at the level for which they are eligible. Requirements for voluntary library certification are…

  7. 46 CFR 107.211 - Original Certificate of Inspection.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Original Certificate of Inspection. 107.211 Section 107... INSPECTION AND CERTIFICATION Inspection and Certification § 107.211 Original Certificate of Inspection. (a) The owner or builder of a unit applies for an inspection for an original Certificate of Inspection by...

  8. Certification of Markets, Markets of Certificates: Tracing Sustainability in Global Agro-Food Value Chains

    NARCIS (Netherlands)

    Mol, A.P.J.; Oosterveer, P.J.M.

    2015-01-01

    There is a blossoming of voluntary certification initiatives for sustainable agro-food products and production processes. With these certification initiatives come traceability in supply chains, to guarantee the sustainability of the products consumed. No systematic analysis exists of traceability

  9. Determing and monitoring of maximum permissible power for HWRR-3

    International Nuclear Information System (INIS)

    Jia Zhanli; Xiao Shigang; Jin Huajin; Lu Changshen

    1987-01-01

    The operating power of a reactor is an important parameter to be monitored. This report briefly describes the determining and monitoring of maximum permissiable power for HWRR-3. The calculating method is described, and the result of calculation and analysis of error are also given. On-line calculation and real time monitoring have been realized at the heavy water reactor. It provides the reactor with a real time and reliable supervision. This makes operation convenient and increases reliability

  10. The new international certification and design principles

    International Nuclear Information System (INIS)

    Heijnen, W.H.P.M.; Heineman, H.

    1995-01-01

    ISO/TC 67 deals with standardization of Equipment for the Petroleum and Natural Gas Industries at a global level. The paper will provide the reader with insight in the Certification system as well as its link with Design. It will explain how the total process fits in the business structure of the Petroleum and Natural Gas Industry, with the focus on the emerging concepts such as partnering, turn key contracts, the developments in the EC and the need to reduce costs at a global basis. The paper will also address the topic of Design Principles based on the results of the study performed for ISO/TC 67. The paper will provide a framework that can be used by the industry in how to deal with issues such as, there shall the activity of the Operator be focused on when ordering equipment or services and how the manufacturer or service provider should prepare himself to become an equal partner with regard to the required equipment, service and its associated technology now and in the future. In the changing world with ever increasing focus on Health, Safety and Environment (HSE), the topic efficiency, technology, equipment performance and functionality should not be overlooked or been given less attention. The Certification and Design principles, implemented in standards, aim predominantly at Fitness for Purpose of equipment and/or services to regain the balance. A further aim is to limit consequential costs due to deficiencies in the broadest sense, allowing the Petroleum and Natural Gas Industry to produce oil and gas in a cost effective manner with the highest possible HSE targets

  11. 14 CFR 302.211 - Procedures in certificate cases involving initial or continuing fitness.

    Science.gov (United States)

    2010-01-01

    ... initial or continuing fitness. 302.211 Section 302.211 Aeronautics and Space OFFICE OF THE SECRETARY... Disposition of Applications § 302.211 Procedures in certificate cases involving initial or continuing fitness... applicant's fitness to operate. Where such applications propose the operation of scheduled service in...

  12. The effect of EUSOMA certification on quality of breast cancer care.

    Science.gov (United States)

    van Dam, P A; Tomatis, M; Marotti, L; Heil, J; Wilson, R; Rosselli Del Turco, M; Mayr, C; Costa, A; Danei, M; Denk, A; Emons, G; Friedrichs, K; Harbeck, N; Kiechle, M; Koheler, U; Kuemmel, S; Maass, N; Marth, C; Prové, A; Kimmig, R; Rageth, C; Regolo, L; Salehi, L; Sarlos, D; Singer, C; Sohn, C; Staelens, G; Tinterri, C; Ponti, A

    2015-10-01

    The European Society of Breast Cancer Specialists (EUSOMA) has fostered a voluntary certification process for breast units to establish minimum standards and ensure specialist multidisciplinary care. In the present study we assess the impact of EUSOMA certification for all breast units for which sufficient information was available before and after certification. For 22 EUSOMA certified breast units data of 30,444 patients could be extracted from the EUSOMA database on the evolution of QI's before and after certification. On the average of all units, the minimum standard of care was achieved for 12/13 QI's before and after EUSOMA certification (not met for DCIS receiving just one operation). There was a significant improvement of 5 QI's after certification. The proportion of patients with invasive cancer undergoing an axillary clearance containing >9 lymph nodes (91.5% vs 89.4%, p 0.003) and patients with invasive cancer having just 1 operation (83.1% vs 80.4%, p importance as complete adherence to guidelines is difficult to achieve. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Multilevel maximum likelihood estimation with application to covariance matrices

    Czech Academy of Sciences Publication Activity Database

    Turčičová, Marie; Mandel, J.; Eben, Kryštof

    Published online: 23 January ( 2018 ) ISSN 0361-0926 R&D Projects: GA ČR GA13-34856S Institutional support: RVO:67985807 Keywords : Fisher information * High dimension * Hierarchical maximum likelihood * Nested parameter spaces * Spectral diagonal covariance model * Sparse inverse covariance model Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 0.311, year: 2016

  14. Analysis of the green certificate market

    International Nuclear Information System (INIS)

    Storeboe, Inger Oeydis

    2001-04-01

    This report studies the advantages and disadvantages of a separate financial market for the environmental advantages in the production of electricity from renewable energy sources. This market solution is evaluated against other financial systems used to promote the production of green electricity. By starting from a general equilibrium model for the green certificate market, the report discusses how the adaptation in the certificate market is influenced by changes in the market conditions. The certificate market is combined with a quota market for carbon dioxide, with and without international trade with electricity and certificate and market power in the production of electricity from renewable energy sources

  15. Investigating weaknesses in Android certificate security

    Science.gov (United States)

    Krych, Daniel E.; Lange-Maney, Stephen; McDaniel, Patrick; Glodek, William

    2015-05-01

    Android's application market relies on secure certificate generation to establish trust between applications and their users; yet, cryptography is often not a priority for application developers and many fail to take the necessary security precautions. Indeed, there is cause for concern: several recent high-profile studies have observed a pervasive lack of entropy on Web-systems leading to the factorization of private keys.1 Sufficient entropy, or randomness, is essential to generate secure key pairs and combat predictable key generation. In this paper, we analyze the security of Android certificates. We investigate the entropy present in 550,000 Android application certificates using the Quasilinear GCD finding algorithm.1 Our results show that while the lack of entropy does not appear to be as ubiquitous in the mobile markets as on Web-systems, there is substantial reuse of certificates only one third of the certificates in our dataset were unique. In other words, we find that organizations frequently reuse certificates for different applications. While such a practice is acceptable under Google's specifications for a single developer, we find that in some cases the same certificates are used for a myriad of developers, potentially compromising Android's intended trust relationships. Further, we observed duplicate certificates being used by both malicious and non-malicious applications. The top 3 repeated certificates present in our dataset accounted for a total of 11,438 separate APKs. Of these applications, 451, or roughly 4%, were identified as malicious by antivirus services.

  16. General practitioners' use of sickness certificates.

    Science.gov (United States)

    Roope, Richard; Parker, Gordon; Turner, Susan

    2009-12-01

    At present, sickness certification is largely undertaken by general practitioners (GPs). Guidance from the Department of Work and Pensions (DWP) is available to help with this task; however, there has been little formal evaluation of the DWP's guidance in relation to day-to-day general practice. To assess GPs' training, knowledge and application of the DWP's sickness certification guidelines. A structured questionnaire was sent to GPs within a (former) primary care trust (PCT). It probed demographics, training and knowledge of sickness certification guidelines. Case histories and structured questions were used to assess current practice. In this group of 113 GPs, there was a low awareness and use of the DWP's guidelines and Website relating to sickness certification. The majority of the GPs (63%) had received no training in sickness certification, and the mean length of time for those who had received training was 4.1 h. Most GPs also felt that patients and GPs have equal influence on the duration of sickness certification. This evidence of variable practice indicates that GPs should have more guidance and education in sickness certification. Closer sickness certification monitoring through existing GP computer systems may facilitate an improvement in practice that benefits patients and employers. The DWP, medical educators and PCTs may all have an additional role in further improving sickness certification practice.

  17. Radiation protection supervisors certification in Brazil

    International Nuclear Information System (INIS)

    Mendonca Costa, Eduardo; Arraes Monteiro, Iara

    2008-01-01

    In order to accomplish its legal assignments CNEN certifies the qualification of radiation protection supervisors. The current certification process is presented and discussed in this paper. This paper discusses the main points of the certification process including: knowledge tests, stake holder's communication, standards, supervisor responsibilities and profiles. The importance of safety certification of nuclear facilities and radiation protection of public individuals and workers are also discussed. Taking into account the characteristics of the Brazilian Nuclear program, the future improvements and goals in the certification process is also presented. (author)

  18. Accounting Changes on Green Certificates in Romania

    Directory of Open Access Journals (Sweden)

    Sava Raluca

    2017-01-01

    Full Text Available The purpose of green certificates is to get more renewable electric energy into the energy market at the expense of traditional energy, which in most countries is based on fossil fuel. These renewable technologies are too expensive to enter the market on commercial terms. A key feature of the scheme is that producers of energy based on new renewable energy sources receive certificates from the authorities, proportional to their output. The users of electric energy are required to buy a certain amount of these certificates when they buy electricity. Green certificates may in principle contribute to a reduction of the production of traditional energy.

  19. Criteria and Processes for the Certification of Non-Radioactive Hazardous and Non-Hazardous Wastes

    International Nuclear Information System (INIS)

    Dominick, J.

    2008-01-01

    This document details Lawrence Livermore National Laboratory's (LLNL) criteria and processes for determining if potentially volumetrically contaminated or potentially surface contaminated wastes are to be managed as material containing residual radioactivity or as non-radioactive. This document updates and replaces UCRL-AR-109662, Criteria and Procedures for the Certification of Nonradioactive Hazardous Waste (Reference 1), also known as 'The Moratorium', and follows the guidance found in the U.S. Department of Energy (DOE) document, Performance Objective for Certification of Non-Radioactive Hazardous Waste (Reference 2). The 1992 Moratorium document (UCRL-AR-109662) is three volumes and 703 pages. The first volume provides an overview of the certification process and lists the key radioanalytical methods and their associated Limits of Sensitivities. Volumes Two and Three contain supporting documents and include over 30 operating procedures, QA plans, training documents and organizational charts that describe the hazardous and radioactive waste management system in place in 1992. This current document is intended to update the previous Moratorium documents and to serve as the top-tier LLNL institutional Moratorium document. The 1992 Moratorium document was restricted to certification of Resource Conservation and Recovery Act (RCRA), State and Toxic Substances Control Act (TSCA) hazardous waste from Radioactive Material Management Areas (RMMA). This still remains the primary focus of the Moratorium; however, this document increases the scope to allow use of this methodology to certify other LLNL wastes and materials destined for off-site disposal, transfer, and re-use including non-hazardous wastes and wastes generated outside of RMMAs with the potential for DOE added radioactivity. The LLNL organization that authorizes off-site transfer/disposal of a material or waste stream is responsible for implementing the requirements of this document. The LLNL Radioactive and

  20. The influence of trade associations and group certification programs on the hardwood certification movement

    Science.gov (United States)

    Iris B. Montague

    2013-01-01

    Forest certification has gained momentum around the world over the past two decades. Although there are advantages to being certified, many forest landowners and forest products manufacturers consider forest certification of U.S. forest and forest products unnecessary. Many believe that U.S. forests are already sustainably managed, the current certification systems are...

  1. 76 FR 22785 - Direct Certification and Certification of Homeless, Migrant and Runaway Children for Free School...

    Science.gov (United States)

    2011-04-25

    ... [FNS-2008-0001] RIN 0584-AD60 Direct Certification and Certification of Homeless, Migrant and Runaway... concerning the certification of certain children who are homeless, runaway, or migratory. This rule affects... children who are homeless, runaway, or migratory, as determined by the homeless coordinator for homeless or...

  2. Receiver function estimated by maximum entropy deconvolution

    Institute of Scientific and Technical Information of China (English)

    吴庆举; 田小波; 张乃铃; 李卫平; 曾融生

    2003-01-01

    Maximum entropy deconvolution is presented to estimate receiver function, with the maximum entropy as the rule to determine auto-correlation and cross-correlation functions. The Toeplitz equation and Levinson algorithm are used to calculate the iterative formula of error-predicting filter, and receiver function is then estimated. During extrapolation, reflective coefficient is always less than 1, which keeps maximum entropy deconvolution stable. The maximum entropy of the data outside window increases the resolution of receiver function. Both synthetic and real seismograms show that maximum entropy deconvolution is an effective method to measure receiver function in time-domain.

  3. Maximum Power from a Solar Panel

    Directory of Open Access Journals (Sweden)

    Michael Miller

    2010-01-01

    Full Text Available Solar energy has become a promising alternative to conventional fossil fuel sources. Solar panels are used to collect solar radiation and convert it into electricity. One of the techniques used to maximize the effectiveness of this energy alternative is to maximize the power output of the solar collector. In this project the maximum power is calculated by determining the voltage and the current of maximum power. These quantities are determined by finding the maximum value for the equation for power using differentiation. After the maximum values are found for each time of day, each individual quantity, voltage of maximum power, current of maximum power, and maximum power is plotted as a function of the time of day.

  4. 45 CFR 170.445 - Complete EHR testing and certification.

    Science.gov (United States)

    2010-10-01

    ... Section 170.445 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.445...

  5. Environmental aspects of the forest management certification process

    CSIR Research Space (South Africa)

    Scott, DF

    2000-01-01

    Full Text Available Certification has been responsible for a very large improvement in the standard of forest management in South Africa. The reasons for the positive role of certification are set out briefly below. Firstly, and most importantly, certification has...

  6. Certification of ICTs in Elections

    DEFF Research Database (Denmark)

    Schürmann, Carsten; Barrat, Jordi; Bolo, Eden

    2015-01-01

    Information and communication technologies play a critical role in the administration and organization of modern elections. Any breakdown of an election technology, security breach or programming error can incur tremendous cost for the electoral management body (EMB)—and may undermine voters’ trust......, starting during the feasibility study, and especially if it is bound by law to provide such a certification. The evaluation reports and related documents can also be used to increase the transparency of the election, improve the dialogue between EMBs and voters, and increase the EMB’s credibility....

  7. Harmonisation of wind turbine certification in Europe JOULE project EWTC

    Energy Technology Data Exchange (ETDEWEB)

    Nath, C [Germanischer Lloyd, Hamburg (Germany); Eriksson, C [Det Norske Veritas, Hellerup (Denmark); Hulle, F van [Frans van Hulle, Petten (Netherlands); Skamris, C [Risoe National Lab., Roskilde (Denmark); Stam, W [CIWI Holland, Arnheim (Netherlands); Vionis, P [CRES, Attki (Greece)

    1999-03-01

    Wind turbine certification requirements are currently fairly divers within Europe. Therefore the leading European certification bodies initiated a JOULE project to harmonise the certification procedure on the basis of the current set of IEC/EN 61400 series standards. The paper presents a review of the state of the art of wind turbine certification in European countries and an outline of the sturcture of the project. The main steps of the project are (a) the collection of differences in certification practices by round robin certification of three wind turbine types; (b) assessment of the different certification results and (c) the development of a harmonised certification procedure. (au) EU-JOULE-3. 19 refs.

  8. 21 CFR 900.22 - Standards for certification agencies.

    Science.gov (United States)

    2010-04-01

    ... accreditation bodies for issues related to mammography image quality and clinical practice. The certification... interest. The certification agency shall establish and implement measures that FDA has approved in...

  9. Maximum Safety Regenerative Power Tracking for DC Traction Power Systems

    Directory of Open Access Journals (Sweden)

    Guifu Du

    2017-02-01

    Full Text Available Direct current (DC traction power systems are widely used in metro transport systems, with running rails usually being used as return conductors. When traction current flows through the running rails, a potential voltage known as “rail potential” is generated between the rails and ground. Currently, abnormal rises of rail potential exist in many railway lines during the operation of railway systems. Excessively high rail potentials pose a threat to human life and to devices connected to the rails. In this paper, the effect of regenerative power distribution on rail potential is analyzed. Maximum safety regenerative power tracking is proposed for the control of maximum absolute rail potential and energy consumption during the operation of DC traction power systems. The dwell time of multiple trains at each station and the trigger voltage of the regenerative energy absorbing device (READ are optimized based on an improved particle swarm optimization (PSO algorithm to manage the distribution of regenerative power. In this way, the maximum absolute rail potential and energy consumption of DC traction power systems can be reduced. The operation data of Guangzhou Metro Line 2 are used in the simulations, and the results show that the scheme can reduce the maximum absolute rail potential and energy consumption effectively and guarantee the safety in energy saving of DC traction power systems.

  10. 40 CFR 86.007-30 - Certification.

    Science.gov (United States)

    2010-07-01

    ... of its franchise agreement with the manufacturer and the dealer certification requirements of § 85... contrary to the terms of its franchise agreement with the manufacturer and the dealer certification... part because a manufacturer has located its facility in a foreign jurisdiction where local law...

  11. 9 CFR 156.6 - Certificates.

    Science.gov (United States)

    2010-01-01

    ... products, if the inspector finds that the requirements as stated in the certification have been met. The... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Certificates. 156.6 Section 156.6 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE...

  12. 49 CFR 179.11 - Welding certification.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Welding certification. 179.11 Section 179.11 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... Design Requirements § 179.11 Welding certification. (a) Welding procedures, welders and fabricators shall...

  13. 12 CFR 4.65 - Certification.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Certification. 4.65 Section 4.65 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY ORGANIZATION AND FUNCTIONS, AVAILABILITY...; Contracting for Goods and Services § 4.65 Certification. (a) Objective. To preserve the integrity and foster...

  14. 40 CFR 92.208 - Certification.

    Science.gov (United States)

    2010-07-01

    ... the construction of a locomotive or locomotive engine, where such step may reasonably be expected to... POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Certification Provisions § 92.208 Certification. (a) This paragraph (a) applies to manufacturers of new locomotives and new locomotive engines. If, after a review of...

  15. 5 CFR 430.404 - Certification criteria.

    Science.gov (United States)

    2010-01-01

    ... MANAGEMENT Performance Appraisal Certification for Pay Purposes § 430.404 Certification criteria. (a) To be... system(s) must provide for the following: (1) Alignment, so that the performance expectations for... that the performance expectations for senior employees meet the requirements of 5 CFR part 430...

  16. 34 CFR 34.21 - Employer certification.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Employer certification. 34.21 Section 34.21 Education Office of the Secretary, Department of Education ADMINISTRATIVE WAGE GARNISHMENT § 34.21 Employer... by the Secretary of the Treasury. (b) The employer must complete and return the certification to us...

  17. General certification procedure of formation organizations

    CERN Document Server

    Int. At. Energy Agency, Wien

    2002-01-01

    This document presents the procedure dealing with the certification of formation organizations dispensing the formation and the risks prevention to the personnel of A or B category in nuclear facilities. This certification proves the organization ability to satisfy the ''F'' specification of the CEFRI. (A.L.B.)

  18. 20 CFR 655.163 - Certification fee.

    Science.gov (United States)

    2010-04-01

    ... States Department of Labor. In the case of an agricultural association acting as a joint employer... determination by the CO to grant an Application for Temporary Employment Certification in whole or in part will include a bill for the required certification fees. Each employer of H-2A workers under the Application...

  19. 40 CFR 68.185 - Certification.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Certification. 68.185 Section 68.185 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... certification that, to the best of the signer's knowledge, information, and belief formed after reasonable...

  20. 49 CFR 172.204 - Shipper's certification.

    Science.gov (United States)

    2010-10-01

    ... the certification the words “herein-named” may be substituted for the words “above-named”. (2) “I... respects in proper condition for transport according to applicable international and national governmental... national governmental regulations. Note to paragraph (c)(1): In the certification, the word “packed” may be...

  1. 40 CFR 86.094-30 - Certification.

    Science.gov (United States)

    2010-07-01

    ... of its franchise agreement with the manufacturer and the dealer certification requirements of § 85... test vehicle(s) (or test engine(s)) meets the requirements of the Act and of this subpart, he will... requirements of the Act and this subpart have been met, he will issue one certificate of conformity per...

  2. 40 CFR 86.1848-10 - Certification.

    Science.gov (United States)

    2010-07-01

    ... be covered by the certificate(s). (ii) Failure to comply fully with the prohibition against selling... selling credits that are not generated or that are not available, as specified in § 86.1864-10, will be... paragraph (c)(9), effective July 6, 2010. For the convenience of the user, the added text is set forth as...

  3. 29 CFR 570.121 - Age certificates.

    Science.gov (United States)

    2010-07-01

    ... certificate furnishes protection to the employer as provided by the act only if it shows the minor to be above the minimum age applicable thereunder to the occupation in which he is employed. Thus, a State.... Pursuant to the regulations of the Secretary, State employment or age certificates are accepted as proof of...

  4. 10 CFR 431.36 - Compliance Certification.

    Science.gov (United States)

    2010-01-01

    ... number”) for any brand name, trademark or other label name under which the manufacturer or private... Certification, the Department will determine whether the document contains all of the elements required by this... Certification is acceptable, it will provide a unique CC number for any brand name, trademark or other name when...

  5. 48 CFR 1609.471 - Contractor certification.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Contractor certification... EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS Debarment, Suspension, and Ineligibility 1609.471 Contractor certification. All FEHBP carriers and applicant carriers...

  6. School Library Media Certification Requirements: 1990 Update.

    Science.gov (United States)

    Perritt, Patsy H.

    1990-01-01

    Presents a compilation of school library media certification requirements taken from responses to a national survey. For each state, existing certificates or endorsements are listed, along with credit hours and/or experience required, whether it is an accredited or approved program, and required subject areas or competencies. A directory of…

  7. Generic Certificates. Agricultural Economic Report Number 594.

    Science.gov (United States)

    Glauber, Joseph W.

    The Food Security Act of 1985 authorizes the U.S. Department of Agriculture to issue generic certificates in lieu of cash payments due to program participants and merchants of agricultural products under provisions of several programs. The certificates may be used to acquire stocks held as collateral on government loans or owned by the Commodity…

  8. 19 CFR 191.76 - Landing certificate.

    Science.gov (United States)

    2010-04-01

    ... landing certificate shall be waived by the requiring Customs authority if the claimant demonstrates... 19 Customs Duties 2 2010-04-01 2010-04-01 false Landing certificate. 191.76 Section 191.76 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY...

  9. White certificates: 14 concerned countries in Europe

    International Nuclear Information System (INIS)

    Signoret, Stephane

    2017-01-01

    Under the constraint of the European directive on energy efficiency, several countries have created or strengthened their white-certificate-type (or certificate of energy saving) obligation system. This article proposes brief overviews of the situation and implemented systems in Austria, Bulgaria, Croatia, Denmark, Greece, Ireland, Italy, Luxembourg, Poland, Slovenia, Spain, and United Kingdom

  10. 28 CFR 26.23 - Certification process.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Certification process. 26.23 Section 26.23 Judicial Administration DEPARTMENT OF JUSTICE DEATH SENTENCES PROCEDURES Certification Process for... mechanism for providing legal representation to indigent prisoners in state postconviction proceedings in...

  11. 9 CFR 93.913 - Health certificate.

    Science.gov (United States)

    2010-01-01

    ... who issues the health certificate. (2) Cleaning and disinfection must be sufficient to neutralize any VHS virus to which shipping containers may have been exposed. (3) The cleaning and disinfection protocols used must be referenced in the health certificate or in a separate cleaning and disinfection...

  12. 29 CFR 1926.29 - Acceptable certifications.

    Science.gov (United States)

    2010-07-01

    ... Acceptable certifications. (a) Pressure vessels. Current and valid certification by an insurance company or... by an insurance company or regulatory authority attesting to the safe installation, inspection, and... types of pressure vessels and similar equipment are contained in subparts F and O of this part. ...

  13. How the CEA sorts out its certifications

    International Nuclear Information System (INIS)

    Lembezat, C.

    2011-01-01

    In order to better manage its numerous certifications, the French CEA decided to implement an integrated management system. It aims at simplifying these certifications, at sharing best practices, and at obtaining a better efficiency. For this project, i.e. the management of quality, safety and environment, the CEA asked for the support of experts in integrated complex system management

  14. The costs and benefits of getting the ISO 9000 certification in the manufacturing sector in Saudi Arabia.

    Science.gov (United States)

    Mezher, T; Ramadan, H

    1998-01-01

    Many Saudi companies, in their journey to improve quality, efficiency and competitiveness, are pursuing and obtaining the ISO 9000 certificate. Many studies have evaluated how to implement ISO 9000 in different sectors, but none have analyzed the effectiveness of ISO 9000 certification (costs and benefits) on improving the overall quality and on meeting expectations. This study addressed these issues by investigating manufacturing organizations in Saudi Arabia that have the ISO 9000 certification. A survey questionnaire was distributed to firms throughout the kingdom. Thirty-two firms participated in the study. Results indicate that increased consistency of operations, improved service, and product quality are among the top motivators for pursuing the ISO certificate. The benefits most often experienced were improved awareness of procedural problems, better management control, keeping existing customers, increased customer satisfaction, and improved customer service. Difficulties experienced during the certification process involved time and cost, but these were not considered to be major problems. A high volume of paperwork was the main problem experienced following initial certification. Respondents in general said that the ISO 9000 certification met their expectations and that their level of satisfaction regarding the impact of ISO 9000 was high. Most recommended that other organizations pursue the certificate.

  15. Maximum permissible voltage of YBCO coated conductors

    Energy Technology Data Exchange (ETDEWEB)

    Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z. [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Hong, Z., E-mail: zhiyong.hong@sjtu.edu.cn [Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China); Wang, D.; Zhou, H.; Shen, X.; Shen, C. [Qingpu Power Supply Company, State Grid Shanghai Municipal Electric Power Company, Shanghai (China)

    2014-06-15

    Highlights: • We examine three kinds of tapes’ maximum permissible voltage. • We examine the relationship between quenching duration and maximum permissible voltage. • Continuous I{sub c} degradations under repetitive quenching where tapes reaching maximum permissible voltage. • The relationship between maximum permissible voltage and resistance, temperature. - Abstract: Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (I{sub c}) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the I{sub c} degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.

  16. Microprocessor-controlled step-down maximum-power-point tracker for photovoltaic systems

    Science.gov (United States)

    Mazmuder, R. K.; Haidar, S.

    1992-12-01

    An efficient maximum power point tracker (MPPT) has been developed and can be used with a photovoltaic (PV) array and a load which requires lower voltage than the PV array voltage to be operated. The MPPT makes the PV array to operate at maximum power point (MPP) under all insolation and temperature, which ensures the maximum amount of available PV power to be delivered to the load. The performance of the MPPT has been studied under different insolation levels.

  17. Solar Maximum Mission Experiment - Ultraviolet Spectroscopy and Polarimetry on the Solar Maximum Mission

    Science.gov (United States)

    Tandberg-Hanssen, E.; Cheng, C. C.; Woodgate, B. E.; Brandt, J. C.; Chapman, R. D.; Athay, R. G.; Beckers, J. M.; Bruner, E. C.; Gurman, J. B.; Hyder, C. L.

    1981-01-01

    The Ultraviolet Spectrometer and Polarimeter on the Solar Maximum Mission spacecraft is described. It is pointed out that the instrument, which operates in the wavelength range 1150-3600 A, has a spatial resolution of 2-3 arcsec and a spectral resolution of 0.02 A FWHM in second order. A Gregorian telescope, with a focal length of 1.8 m, feeds a 1 m Ebert-Fastie spectrometer. A polarimeter comprising rotating Mg F2 waveplates can be inserted behind the spectrometer entrance slit; it permits all four Stokes parameters to be determined. Among the observing modes are rasters, spectral scans, velocity measurements, and polarimetry. Examples of initial observations made since launch are presented.

  18. National Certification Methodology for the Nuclear Weapons Stockpile

    International Nuclear Information System (INIS)

    Goodwin, B T; Juzaitis, R J

    2006-01-01

    and December of 2001 and continued in 2002 have proven useful in developing the methodology, and future workshops should prove useful in further refining this framework. Each laboratory developed an approach to certification with some differences in detailed implementation. The general methodology introduces specific quantitative indicators for assessing confidence in our nuclear weapon stockpile. The quantitative indicators are based upon performance margins for key operating characteristics and components of the system, and these are compared to uncertainties in these factors. These criteria can be summarized in a quantitative metric (for each such characteristic) expressed as: (i.e., confidence in warhead performance depends upon CR significantly exceeding unity for all these characteristics). These Confidence Ratios are proposed as a basis for guiding technical and programmatic decisions on stockpile actions. This methodology already has been deployed in certifying weapons undergoing current life extension programs or component remanufacture. The overall approach is an adaptation of standard engineering practice and lends itself to rigorous, quantitative, and explicit criteria for judging the robustness of weapon system and component performance at a detailed level. There are, of course, a number of approaches for assessing these Confidence Ratios. The general certification methodology was publicly presented for the first time to a meeting of Strategic Command SAG in January 2002 and met with general approval. At that meeting, the Laboratories committed to further refine and develop the methodology through the implementation process. This paper reflects the refinement and additional development to date. There will be even further refinement at a joint laboratory workshop later in FY03. A common certification methodology enables us to engage in peer reviews and evaluate nuclear weapon systems on the basis of explicit and objective metrics. The clarity provided by

  19. Savannah River Certification Plan for newly generated, contact-handled transuranic waste

    International Nuclear Information System (INIS)

    Wierzbicki, K.S.

    1986-01-01

    This Certification Plan document describes the necessary processes and methods for certifying unclassified, newly generated, contact-handled solid transuranic (TRU) waste at the Savannah River Plant and Laboratory (SRP, SRL) to comply with the Waste Isolation Pilot Plant Waste Acceptance Criteria (WIPP-WAC). Section 2 contains the organizational structure as related to waste certification including a summary of functional responsibilities, levels of authority, and lines of communication of the various organizations involved in certification activities. Section 3 describes general plant operations and TRU waste generation. Included is a description of the TRU Waste classification system. Section 4 contains the SR site TRU Waste Quality Assurance Program Plan. Section 5 describes waste container procurement, inspection, and certification prior to being loaded with TRU waste. Certification of waste packages, after package closure in the waste generating areas, is described in Section 6. The packaging and certification of individual waste forms is described in Attachments 1-5. Included in each attachment is a description of controls used to ensure that waste packages meet all applicable waste form compliance requirements for shipment to the WIPP. 3 figs., 3 tabs

  20. National Certification Standard for Ground Source Heat Pump Personnel

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, John [Geothermal Heat Pump Consortium, Washington, DC (United States)

    2013-07-31

    The National Certification Standard for the Geothermal Heat Pump Industry adds to the understanding of the barriers to rapid growth of the geothermal heat pump (GHP) industry by bringing together for the first time an analysis of the roles and responsibilities of each of the individual job tasks involved in the design and installation of GHP systems. The standard addresses applicable qualifications for all primary personnel involved in the design, installation, commissioning, operation and maintenance of GHP systems, including their knowledge, skills and abilities. The resulting standard serves as a foundation for subsequent development of curriculum, training and certification programs, which are not included in the scope of this project, but are briefly addressed in the standard to describe ways in which the standard developed in this project may form a foundation to support further progress in accomplishing those other efforts. Follow-on efforts may use the standard developed in this project to improve the technical effectiveness and economic feasibility of curriculum development and training programs for GHP industry personnel, by providing a more complete and objective assessment of the individual job tasks necessary for successful implementation of GHP systems. When incorporated into future certification programs for GHP personnel, the standard will facilitate increased consumer confidence in GHP technology, reduce the potential for improperly installed GHP systems, and assure GHP system quality and performance, all of which benefit the public through improved energy efficiency and mitigated environmental impacts of the heating and cooling of homes and businesses.

  1. Revealing the Maximum Strength in Nanotwinned Copper

    DEFF Research Database (Denmark)

    Lu, L.; Chen, X.; Huang, Xiaoxu

    2009-01-01

    boundary–related processes. We investigated the maximum strength of nanotwinned copper samples with different twin thicknesses. We found that the strength increases with decreasing twin thickness, reaching a maximum at 15 nanometers, followed by a softening at smaller values that is accompanied by enhanced...

  2. Modelling maximum canopy conductance and transpiration in ...

    African Journals Online (AJOL)

    There is much current interest in predicting the maximum amount of water that can be transpired by Eucalyptus trees. It is possible that industrial waste water may be applied as irrigation water to eucalypts and it is important to predict the maximum transpiration rates of these plantations in an attempt to dispose of this ...

  3. Modeling multisite streamflow dependence with maximum entropy copula

    Science.gov (United States)

    Hao, Z.; Singh, V. P.

    2013-10-01

    Synthetic streamflows at different sites in a river basin are needed for planning, operation, and management of water resources projects. Modeling the temporal and spatial dependence structure of monthly streamflow at different sites is generally required. In this study, the maximum entropy copula method is proposed for multisite monthly streamflow simulation, in which the temporal and spatial dependence structure is imposed as constraints to derive the maximum entropy copula. The monthly streamflows at different sites are then generated by sampling from the conditional distribution. A case study for the generation of monthly streamflow at three sites in the Colorado River basin illustrates the application of the proposed method. Simulated streamflow from the maximum entropy copula is in satisfactory agreement with observed streamflow.

  4. Estimating the maximum potential revenue for grid connected electricity storage :

    Energy Technology Data Exchange (ETDEWEB)

    Byrne, Raymond Harry; Silva Monroy, Cesar Augusto.

    2012-12-01

    The valuation of an electricity storage device is based on the expected future cash flow generated by the device. Two potential sources of income for an electricity storage system are energy arbitrage and participation in the frequency regulation market. Energy arbitrage refers to purchasing (stor- ing) energy when electricity prices are low, and selling (discharging) energy when electricity prices are high. Frequency regulation is an ancillary service geared towards maintaining system frequency, and is typically procured by the independent system operator in some type of market. This paper outlines the calculations required to estimate the maximum potential revenue from participating in these two activities. First, a mathematical model is presented for the state of charge as a function of the storage device parameters and the quantities of electricity purchased/sold as well as the quantities o ered into the regulation market. Using this mathematical model, we present a linear programming optimization approach to calculating the maximum potential revenue from an elec- tricity storage device. The calculation of the maximum potential revenue is critical in developing an upper bound on the value of storage, as a benchmark for evaluating potential trading strate- gies, and a tool for capital nance risk assessment. Then, we use historical California Independent System Operator (CAISO) data from 2010-2011 to evaluate the maximum potential revenue from the Tehachapi wind energy storage project, an American Recovery and Reinvestment Act of 2009 (ARRA) energy storage demonstration project. We investigate the maximum potential revenue from two di erent scenarios: arbitrage only and arbitrage combined with the regulation market. Our analysis shows that participation in the regulation market produces four times the revenue compared to arbitrage in the CAISO market using 2010 and 2011 data. Then we evaluate several trading strategies to illustrate how they compare to the

  5. Simultaneous Authentication and Certification of Arms-Control Measurement Systems

    International Nuclear Information System (INIS)

    MacArthur, Duncan W.; Hauck, Danielle K.; Thron, Jonathan L.

    2012-01-01

    Most arms-control-treaty-monitoring scenarios involve a host party that makes a declaration regarding its nuclear material or items and a monitoring party that verifies that declaration. A verification system developed for such a use needs to be trusted by both parties. The first concern, primarily from the host party's point of view, is that any sensitive information that is collected must be protected without interfering in the efficient operation of the facility being monitored. This concern is addressed in what can be termed a 'certification' process. The second concern, of particular interest to the monitoring party, is that it must be possible to confirm the veracity of both the measurement system and the data produced by this measurement system. The monitoring party addresses these issues during an 'authentication' process. Addressing either one of these concerns independently is relatively straightforward. However, it is more difficult to simultaneously satisfy host party certification concerns and monitoring party authentication concerns. Typically, both parties will want the final access to the measurement system. We will describe an alternative approach that allows both parties to gain confidence simultaneously. This approach starts with (1) joint development of the measurement system followed by (2) host certification of several copies of the system and (3) random selection by the inspecting party of one copy to be use during the monitoring visit and one (or more) copy(s) to be returned to the inspecting party's facilities for (4) further hardware authentication; any remaining copies are stored under joint seal for use as spares. Following this process, the parties will jointly (5) perform functional testing on the selected measurement system and then (6) use this system during the monitoring visit. Steps (1) and (2) assure the host party as to the certification of whichever system is eventually used in the monitoring visit. Steps (1), (3), (4), and (5

  6. Certification of building thermographers: experiences after three courses

    Science.gov (United States)

    Kauppinen, Timo; Hekkanen, Martti; Paloniitty, Sauli; Krankka, Juha

    2006-04-01

    The certification procedure of building thermographers was started in 2003, even though thermography has been used in Finland in building survey since late 70's. There has been about a 25 years' unorganized and more or less wild period, without any generally accepted rules for interpretation, as well as how to order thermography services, how to report the results, how to do the practical work in the buildings etc. The service was provided by consultants with varied backgrounds. More operators have come into the market and building developers and contractors have begun to use thermography for quality control in new building and in renovation planning. In the year 2004 various organizations in building trade launched a pilot project to certificate building thermographers. The structure and the topics of the course were introduced in Thermosense 2005. By the end of the year 2005 the third course was completed. From the beginning of the procedure to the end of the third course about 40 persons have received a certificate. During the certification process, two guidelines have been published, as part of RT (Building Information) - files: instructions for ordering, for practical field work and for reporting of thermography survey in buildings. The guidelines also contain basics for interpretation. The interpretation is consistent with the other existing directions (building codes etc). At the turn of 2005 - 2006 a new book of building thermography was published. There is still lack of comprehensive as well as unambiguous rules for interpretation. In the paper we will present experiences on the courses, the main problems posed to the participants and findings during the last two - three years' field work. We will also introduce briefly the structure and content of the guidelines and an example how to use thermography as a tool of quality control in new building. The case studies are new one-family houses in a housing fair and exhibition area in the city of Oulu.

  7. Qualification and certification in NDT

    International Nuclear Information System (INIS)

    Hassan Kavarodi Maracair

    2003-01-01

    Ruane-TATI Sdn Bhd was the first accredited training centre in Asia approved by The British Institute of Non Destructive Testing (BINDT) as per EN 473, ISO 9712 and EN 45013 requirements. Meanwhile, Ruane-TATI is also accredited by National Vocational Training Center ( MLVK ).This mean that Ruane-TATI is the first training and examination center that accredited by both international and national bodies in providing quality , qualification and certification for comprehensive training and examination in Inspection and Non Destructive Testing (NDT). There are several NDT examinations scheme available in Malaysia due to differences requirement from the industrials. This has put the difficulties to services company in upgrading their NDT technician qualifications. The intention of this paper is to discuss the basic different among the NDT examinations scheme used in Malaysia ( mostly offered by Ruane-TATI ) and the development of certain schemes in covering their schemes to more sectors and NDT methods. (Author)

  8. Life after oral English certification

    DEFF Research Database (Denmark)

    Dimova, Slobodanka

    2017-01-01

    , this study discusses the consequences resulting from score and feedback interpretations and uses as part of the validation process of TOEPAS (Test of Oral English Proficiency for Academic Staff), which is a performance-based test used for oral English certification of lecturers at the University......Internationalization of higher education has resulted in rapid developments of English-medium instruction (EMI) courses in non-Anglophone countries in Europe and Asia. Due to the growing concerns about lecturers' ability to teach in English, several European universities have implemented policies...... for internal assessment of lecturers' English proficiency to ensure the quality of teaching in EMI programs. However, research on the measured construct and the reliability and the validity of these assessments remains scarce. Based on interviews with tested university lecturers and formative feedback analysis...

  9. Maintenance of Certification for Radiation Oncology

    International Nuclear Information System (INIS)

    Kun, Larry E.; Ang, Kian; Erickson, Beth; Harris, Jay; Hoppe, Richard; Leibel, Steve; Davis, Larry; Hattery, Robert

    2005-01-01

    Maintenance of Certification (MOC) recognizes that in addition to medical knowledge, several essential elements involved in delivering quality care must be developed and maintained throughout one's career. The MOC process is designed to facilitate and document professional development of American Board of Radiology (ABR) diplomates in the essential elements of quality care in Radiation Oncology and Radiologic Physics. ABR MOC has been developed in accord with guidelines of the American Board of Medical Specialties. All Radiation Oncology certificates issued since 1995 are 10-year, time-limited certificates; diplomates with time-limited certificates who wish to maintain specialty certification must complete specific requirements of the American Board of Radiology MOC program. Diplomates with lifelong certificates are not required to participate but are strongly encouraged to do so. Maintenance of Certification is based on documentation of participation in the four components of MOC: (1) professional standing, (2) lifelong learning and self-assessment, (3) cognitive expertise, and (4) performance in practice. Through these components, MOC addresses six competencies-medical knowledge, patient care, interpersonal and communication skills, professionalism, practice-based learning and improvement, and systems-based practice. Details of requirements for components 1, 2, and 3 of MOC are outlined along with aspects of the fourth component currently under development

  10. Size dependence of efficiency at maximum power of heat engine

    KAUST Repository

    Izumida, Y.; Ito, N.

    2013-01-01

    We perform a molecular dynamics computer simulation of a heat engine model to study how the engine size difference affects its performance. Upon tactically increasing the size of the model anisotropically, we determine that there exists an optimum size at which the model attains the maximum power for the shortest working period. This optimum size locates between the ballistic heat transport region and the diffusive heat transport one. We also study the size dependence of the efficiency at the maximum power. Interestingly, we find that the efficiency at the maximum power around the optimum size attains a value that has been proposed as a universal upper bound, and it even begins to exceed the bound as the size further increases. We explain this behavior of the efficiency at maximum power by using a linear response theory for the heat engine operating under a finite working period, which naturally extends the low-dissipation Carnot cycle model [M. Esposito, R. Kawai, K. Lindenberg, C. Van den Broeck, Phys. Rev. Lett. 105, 150603 (2010)]. The theory also shows that the efficiency at the maximum power under an extreme condition may reach the Carnot efficiency in principle.© EDP Sciences Società Italiana di Fisica Springer-Verlag 2013.

  11. Size dependence of efficiency at maximum power of heat engine

    KAUST Repository

    Izumida, Y.

    2013-10-01

    We perform a molecular dynamics computer simulation of a heat engine model to study how the engine size difference affects its performance. Upon tactically increasing the size of the model anisotropically, we determine that there exists an optimum size at which the model attains the maximum power for the shortest working period. This optimum size locates between the ballistic heat transport region and the diffusive heat transport one. We also study the size dependence of the efficiency at the maximum power. Interestingly, we find that the efficiency at the maximum power around the optimum size attains a value that has been proposed as a universal upper bound, and it even begins to exceed the bound as the size further increases. We explain this behavior of the efficiency at maximum power by using a linear response theory for the heat engine operating under a finite working period, which naturally extends the low-dissipation Carnot cycle model [M. Esposito, R. Kawai, K. Lindenberg, C. Van den Broeck, Phys. Rev. Lett. 105, 150603 (2010)]. The theory also shows that the efficiency at the maximum power under an extreme condition may reach the Carnot efficiency in principle.© EDP Sciences Società Italiana di Fisica Springer-Verlag 2013.

  12. On the maximum Q in feedback controlled subignited plasmas

    International Nuclear Information System (INIS)

    Anderson, D.; Hamnen, H.; Lisak, M.

    1990-01-01

    High Q operation in feedback controlled subignited fusion plasma requires the operating temperature to be close to the ignition temperature. In the present work we discuss technological and physical effects which may restrict this temperature difference. The investigation is based on a simplified, but still accurate, 0=D analytical analysis of the maximum Q of a subignited system. Particular emphasis is given to sawtooth ocsillations which complicate the interpretation of diagnostic neutron emission data into plasma temperatures and may imply an inherent lower bound on the temperature deviation from the ignition point. The estimated maximum Q is found to be marginal (Q = 10-20) from the point of view of a fusion reactor. (authors)

  13. Maximum field capability of energy saver superconducting magnets

    International Nuclear Information System (INIS)

    Turkot, F.; Cooper, W.E.; Hanft, R.; McInturff, A.

    1983-01-01

    At an energy of 1 TeV the superconducting cable in the Energy Saver dipole magnets will be operating at ca. 96% of its nominal short sample limit; the corresponding number in the quadrupole magnets will be 81%. All magnets for the Saver are individually tested for maximum current capability under two modes of operation; some 900 dipoles and 275 quadrupoles have now been measured. The dipole winding is composed of four individually wound coils which in general come from four different reels of cable. As part of the magnet fabrication quality control a short piece of cable from both ends of each reel has its critical current measured at 5T and 4.3K. In this paper the authors describe and present the statistical results of the maximum field tests (including quench and cycle) on Saver dipole and quadrupole magnets and explore the correlation of these tests with cable critical current

  14. 78 FR 16779 - Type Certification Procedures for Changed Products

    Science.gov (United States)

    2013-03-19

    ...-8994; Amdt. No. 21-96] RIN 2120-AK19 Type Certification Procedures for Changed Products AGENCY: Federal... requirements for the certification of changes to type-certificated products. The revision required the... entitled, ``Type Certification Procedures for Changed Products'' (December 4, 2012, 77 FR 71691). The 2000...

  15. 77 FR 71691 - Type Certification Procedures for Changed Products

    Science.gov (United States)

    2012-12-04

    ...-8994; Amdt. No. 21-96] RIN 2120-AK19 Type Certification Procedures for Changed Products AGENCY: Federal... regulations for the certification of changes to type-certificated products. That amendment was to enhance... (certification) of the entire changed product. Therefore, Sec. 21.101 is amended to replace ``changed product...

  16. 13 CFR 120.612 - Loans eligible to back Certificates.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Loans eligible to back Certificates. 120.612 Section 120.612 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Secondary Market Certificates § 120.612 Loans eligible to back Certificates. (a) Pool Certificates...

  17. 7 CFR 205.405 - Denial of certification.

    Science.gov (United States)

    2010-01-01

    ... PROVISIONS NATIONAL ORGANIC PROGRAM Certification § 205.405 Denial of certification. (a) When the certifying... organic program. (e) An applicant for certification who has received a written notification of... 7 Agriculture 3 2010-01-01 2010-01-01 false Denial of certification. 205.405 Section 205.405...

  18. 7 CFR 205.400 - General requirements for certification.

    Science.gov (United States)

    2010-01-01

    ...) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Certification § 205.400 General requirements for certification. A person seeking to receive or maintain organic certification under the... 7 Agriculture 3 2010-01-01 2010-01-01 false General requirements for certification. 205.400...

  19. 7 CFR 205.401 - Application for certification.

    Science.gov (United States)

    2010-01-01

    ... PROVISIONS NATIONAL ORGANIC PROGRAM Certification § 205.401 Application for certification. A person seeking... certification to a certifying agent. The application must include the following information: (a) An organic... 7 Agriculture 3 2010-01-01 2010-01-01 false Application for certification. 205.401 Section 205.401...

  20. 21 CFR 80.37 - Treatment of batch pending certification.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Treatment of batch pending certification. 80.37 Section 80.37 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL COLOR ADDITIVE CERTIFICATION Certification Procedures § 80.37 Treatment of batch pending certification...

  1. 77 FR 12562 - Export Trade Certificate of Review

    Science.gov (United States)

    2012-03-01

    ... DEPARTMENT OF COMMERCE International Trade Administration [Application No. 10-2A001] Export Trade Certificate of Review ACTION: Notice of Application (10-2A001) to Amend the Export Trade Certificate of Review..., has received an application to amend an Export Trade Certificate of Review (``Certificate''). This...

  2. 78 FR 30273 - Export Trade Certificate of Review

    Science.gov (United States)

    2013-05-22

    ... DEPARTMENT OF COMMERCE International Trade Administration [Application No. 84-24A12] Export Trade Certificate of Review ACTION: Notice of Application to Amend the Export Trade Certificate of Review Issued to... application to amend an Export Trade Certificate of Review (``Certificate''). This notice summarizes the...

  3. 14 CFR 125.7 - Display of certificate.

    Science.gov (United States)

    2010-01-01

    ... OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT General § 125.7 Display of certificate. (a) The certificate holder must display a true copy of the certificate in each of its aircraft. (b... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Display of certificate. 125.7 Section 125.7...

  4. 40 CFR 89.105 - Certificate of conformity.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Certificate of conformity. 89.105... and Certification Provisions § 89.105 Certificate of conformity. Every manufacturer of a new nonroad compression-ignition engine must obtain a certificate of conformity covering the engine family, as described...

  5. 40 CFR 90.106 - Certificate of conformity.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Certificate of conformity. 90.106... Standards and Certification Provisions § 90.106 Certificate of conformity. (a)(1) Except as provided in § 90... certificate of conformity covering such engines; however, engines manufactured during an annual production...

  6. 40 CFR 91.106 - Certificate of conformity.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Certificate of conformity. 91.106... Provisions § 91.106 Certificate of conformity. (a) Every manufacturer of a new marine SI engine produced... obtain a certificate of conformity covering each engine family. The certificate of conformity must be...

  7. 78 FR 62585 - Export Trade Certificate of Review

    Science.gov (United States)

    2013-10-22

    ... DEPARTMENT OF COMMERCE International Trade Administration [Application No. 89-5A018] Export Trade Certificate of Review ACTION: Notice of Application to amend the Export Trade Certificate of Review Issued to... received an application to amend an Export Trade Certificate of Review (``Certificate''). This notice...

  8. 78 FR 36747 - Export Trade Certificate of Review

    Science.gov (United States)

    2013-06-19

    ... DEPARTMENT OF COMMERCE International Trade Administration [Application No. 89-4A018] Export Trade Certificate of Review ACTION: Notice of Application to amend the Export Trade Certificate of Review Issued to... received an application to amend an Export Trade Certificate of Review (``Certificate''). This notice...

  9. 78 FR 72865 - Export Trade Certificate of Review

    Science.gov (United States)

    2013-12-04

    ... DEPARTMENT OF COMMERCE International Trade Administration [Application No. 92-12A001] Export Trade Certificate of Review ACTION: Notice of application to amend the Export Trade Certificate of Review issued to..., has received an application to amend an Export Trade Certificate of Review (``Certificate''). This...

  10. 78 FR 36745 - Export Trade Certificate of Review

    Science.gov (United States)

    2013-06-19

    ... DEPARTMENT OF COMMERCE International Trade Administration [Application No. 87-9A001] Export Trade Certificate of Review ACTION: Notice of Application to amend the Export Trade Certificate of Review Issued to..., has received an application to amend an Export Trade Certificate of Review (``Certificate''). This...

  11. Certification of a weld produced by friction stir welding

    Science.gov (United States)

    Obaditch, Chris; Grant, Glenn J

    2013-10-01

    Methods, devices, and systems for providing certification of friction stir welds are disclosed. A sensor is used to collect information related to a friction stir weld. Data from the sensor is compared to threshold values provided by an extrinsic standard setting organizations using a certification engine. The certification engine subsequently produces a report on the certification status of the weld.

  12. ECOTOURISM CERTIFICATION PROGRAMS: STANDARDS AND BENEFITS

    Directory of Open Access Journals (Sweden)

    Mariia Holub

    2015-11-01

    Full Text Available The problem of researching the ecotourism certification processes in the world is very up-to-date nowadays. The relevance of the research is stipulated by current state of environ-mental pollutants, the development of sustainable politics implementation and the fact that now people aware of real danger of environmental catastrophe that threatens the survival of civilization. That’s why the purpose of the article is conducting a complex analysis of foreign ecotourism certi-fication programs. Moreover, it is necessary to study the evolution of ecotourism development to understand the key issues of this problem. The object of this article is the analysis of ecotourism certification worldwide. The subject of the article is the detection of theoretical, methodological and practical aspects of implementation of effective ecotourism certification programs in Ukraine. To clarify all aspects of studying this issue it is necessary to use such theoretical and methodological basis as: modern theories of the genesis and evolution of ecological tourism, logical and analogy analysis, historical method, hypothetical method, classification and graphical method. Using such methods it was found that the development of ecotourism formation has taking three evolutionary steps, which affected the creation of its definition. This fact reveals the classification of different types of sustainable tourism and provides an impetus of ecotourism certification studies. Moreover, it was identified that there is a logical regularity in ecotourism certification programs all over the world. As the result, it was found that practically all the ecotourism certification processes are functioning successfully nowadays. By the way, it can be observed the rapid increase in the amount of ecocertified companies. Moreover, the programs which were analyzed in this article were divided into several steps (depends on the ecotourism certification program following which a company can

  13. White certificate: how to launch the system?

    International Nuclear Information System (INIS)

    2005-01-01

    White certificates are a supple and suitable economical system for the quest of diffuse energy saving. It relies on the energy distribution networks and is complementary to other existing system (fiscality, regulation, etc). It is an open system, based on a market logics in order to make energy savings where they are the less costly. This document gathers the synthesis of the conference about white certificates, held in Paris in October 2005, the presentations (transparencies) given by J. Percebois (Creden) about the French system of energy savings and by P. Guyonnet (ATEE) about the way to launch the system of white certificates. The debate with the audience is also reported. (J.S.)

  14. Continuous Certification Within Residency: An Educational Model.

    Science.gov (United States)

    Rachlin, Susan; Schonberger, Alison; Nocera, Nicole; Acharya, Jay; Shah, Nidhi; Henkel, Jacqueline

    2015-10-01

    Given that maintaining compliance with Maintenance of Certification is necessary for maintaining licensure to practice as a radiologist and provide quality patient care, it is important for radiology residents to practice fulfilling each part of the program during their training not only to prepare for success after graduation but also to adequately learn best practices from the beginning of their professional careers. This article discusses ways to implement continuous certification (called Continuous Residency Certification) as an educational model within the residency training program. Copyright © 2015 AUR. Published by Elsevier Inc. All rights reserved.

  15. MXLKID: a maximum likelihood parameter identifier

    International Nuclear Information System (INIS)

    Gavel, D.T.

    1980-07-01

    MXLKID (MaXimum LiKelihood IDentifier) is a computer program designed to identify unknown parameters in a nonlinear dynamic system. Using noisy measurement data from the system, the maximum likelihood identifier computes a likelihood function (LF). Identification of system parameters is accomplished by maximizing the LF with respect to the parameters. The main body of this report briefly summarizes the maximum likelihood technique and gives instructions and examples for running the MXLKID program. MXLKID is implemented LRLTRAN on the CDC7600 computer at LLNL. A detailed mathematical description of the algorithm is given in the appendices. 24 figures, 6 tables

  16. Maximum likelihood convolutional decoding (MCD) performance due to system losses

    Science.gov (United States)

    Webster, L.

    1976-01-01

    A model for predicting the computational performance of a maximum likelihood convolutional decoder (MCD) operating in a noisy carrier reference environment is described. This model is used to develop a subroutine that will be utilized by the Telemetry Analysis Program to compute the MCD bit error rate. When this computational model is averaged over noisy reference phase errors using a high-rate interpolation scheme, the results are found to agree quite favorably with experimental measurements.

  17. Europe's Common Market: Natural gas sector normatives and certification

    International Nuclear Information System (INIS)

    Musazzi, V.

    1992-01-01

    Europe's Common Market offers an interesting challenge to its member countries' natural gas distribution system operators in that which regards the creation of a European-wide natural gas control board, and European standardization and regulatory committees contemporaneously guaranteeing a free market for suppliers, as well as, consumer protection. Relative legislation and normatives activities will be deemed the responsibility of the European administrative structure and the the European Normatives Committee respectively. This paper briefly illustrates the progress that has been accomplished thus far in the standardization of technical aspects. Focus is on the certification of natural gas distribution system constructors

  18. Green certificates and market power in the Nordic power market

    DEFF Research Database (Denmark)

    Amundsen, Eirik S; Bergman, Lars

    2012-01-01

    principles and a numerical model based on that to investigate the Swedish TGC market operating in a setting of a common Nordic electricity market. The analysis shows that Swedish producers may exercise market power using the TGC-market but that this problem will be eliminated by opening the TGC-market......The purpose of this study is to elucidate under which circumstances, how, and to what extent market power on a Tradable Green Certificates (TGC) market can be used to affect an entire electricity market. There are basically two reasons for being concerned with this. One is that a small number...

  19. 14 CFR 91.527 - Operating in icing conditions.

    Science.gov (United States)

    2010-01-01

    ... Aviation Regulation No. 23, or those for transport category airplane type certification, no pilot may fly... for transport category airplane type certification, no pilot may fly an airplane into known or...-Powered Multiengine Airplanes and Fractional Ownership Program Aircraft § 91.527 Operating in icing...

  20. Guidelines for developing certification programs for newly generated TRU waste

    International Nuclear Information System (INIS)

    Whitty, W.J.; Ostenak, C.A.; Pillay, K.K.S.; Geoffrion, R.R.

    1983-05-01

    These guidelines were prepared with direction from the US Department of Energy (DOE) Transuranic (TRU) Waste Management Program in support of the DOE effort to certify that newly generated TRU wastes meet the Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria. The guidelines provide instructions for generic Certification Program preparation for TRU-waste generators preparing site-specific Certification Programs in response to WIPP requirements. The guidelines address all major aspects of a Certification Program that are necessary to satisfy the WIPP Waste Acceptance Criteria and their associated Compliance Requirements and Certification Quality Assurance Requirements. The details of the major element of a Certification Program, namely, the Certification Plan, are described. The Certification Plan relies on supporting data and control documentation to provide a traceable, auditable account of certification activities. Examples of specific parts of the Certification Plan illustrate the recommended degree of detail. Also, a brief description of generic waste processes related to certification activities is included

  1. The Ultraviolet Spectrometer and Polarimeter on the Solar Maximum Mission

    Science.gov (United States)

    Woodgate, B. E.; Brandt, J. C.; Kalet, M. W.; Kenny, P. J.; Tandberg-Hanssen, E. A.; Bruner, E. C.; Beckers, J. M.; Henze, W.; Knox, E. D.; Hyder, C. L.

    1980-01-01

    The Ultraviolet Spectrometer and Polarimeter (UVSP) on the Solar Maximum Mission spacecraft is described, including the experiment objectives, system design, performance, and modes of operation. The instrument operates in the wavelength range 1150-3600 A with better than 2 arcsec spatial resolution, raster range 256 x 256 sq arcsec, and 20 mA spectral resolution in second order. Observations can be made with specific sets of four lines simultaneously, or with both sides of two lines simultaneously for velocity and polarization. A rotatable retarder can be inserted into the spectrometer beam for measurement of Zeeman splitting and linear polarization in the transition region and chromosphere.

  2. The ultraviolet spectrometer and polarimeter on the solar maximum mission

    International Nuclear Information System (INIS)

    Woodgate, B.E.; Brandt, J.C.; Kalet, M.W.; Kenny, P.J.; Beckers, J.M.; Henze, W.; Hyder, C.L.; Knox, E.D.

    1980-01-01

    The Ultraviolet Spectrometer and Polarimeter (UVSP) on the Solar Maximum Mission spacecraft is described, including the experiment objectives, system design. performance, and modes of operation. The instrument operates in the wavelength range 1150-3600 Angstreom with better than 2 arc sec spatial resolution, raster range 256 x 256 arc sec 2 , and 20 m Angstroem spectral resolution in second order. Observations can be made with specific sets of 4 lines simultaneously, or with both sides of 2 lines simultaneously for velocity and polarization. A rotatable retarder can be inserted into the spectrometer beam for measurement of Zeeman splitting and linear polarization in the transition region and chromosphere. (orig.)

  3. A simple maximum power point tracker for thermoelectric generators

    International Nuclear Information System (INIS)

    Paraskevas, Alexandros; Koutroulis, Eftichios

    2016-01-01

    Highlights: • A Maximum Power Point Tracking (MPPT) method for thermoelectric generators is proposed. • A power converter is controlled to operate on a pre-programmed locus. • The proposed MPPT technique has the advantage of operational and design simplicity. • The experimental average deviation from the MPP power of the TEG source is 1.87%. - Abstract: ThermoElectric Generators (TEGs) are capable to harvest the ambient thermal energy for power-supplying sensors, actuators, biomedical devices etc. in the μW up to several hundreds of Watts range. In this paper, a Maximum Power Point Tracking (MPPT) method for TEG elements is proposed, which is based on controlling a power converter such that it operates on a pre-programmed locus of operating points close to the MPPs of the power–voltage curves of the TEG power source. Compared to the past-proposed MPPT methods for TEGs, the technique presented in this paper has the advantage of operational and design simplicity. Thus, its implementation using off-the-shelf microelectronic components with low-power consumption characteristics is enabled, without being required to employ specialized integrated circuits or signal processing units of high development cost. Experimental results are presented, which demonstrate that for MPP power levels of the TEG source in the range of 1–17 mW, the average deviation of the power produced by the proposed system from the MPP power of the TEG source is 1.87%.

  4. Maximum neutron flux in thermal reactors

    International Nuclear Information System (INIS)

    Strugar, P.V.

    1968-12-01

    Direct approach to the problem is to calculate spatial distribution of fuel concentration if the reactor core directly using the condition of maximum neutron flux and comply with thermal limitations. This paper proved that the problem can be solved by applying the variational calculus, i.e. by using the maximum principle of Pontryagin. Mathematical model of reactor core is based on the two-group neutron diffusion theory with some simplifications which make it appropriate from maximum principle point of view. Here applied theory of maximum principle are suitable for application. The solution of optimum distribution of fuel concentration in the reactor core is obtained in explicit analytical form. The reactor critical dimensions are roots of a system of nonlinear equations and verification of optimum conditions can be done only for specific examples

  5. Maximum allowable load on wheeled mobile manipulators

    International Nuclear Information System (INIS)

    Habibnejad Korayem, M.; Ghariblu, H.

    2003-01-01

    This paper develops a computational technique for finding the maximum allowable load of mobile manipulator during a given trajectory. The maximum allowable loads which can be achieved by a mobile manipulator during a given trajectory are limited by the number of factors; probably the dynamic properties of mobile base and mounted manipulator, their actuator limitations and additional constraints applied to resolving the redundancy are the most important factors. To resolve extra D.O.F introduced by the base mobility, additional constraint functions are proposed directly in the task space of mobile manipulator. Finally, in two numerical examples involving a two-link planar manipulator mounted on a differentially driven mobile base, application of the method to determining maximum allowable load is verified. The simulation results demonstrates the maximum allowable load on a desired trajectory has not a unique value and directly depends on the additional constraint functions which applies to resolve the motion redundancy

  6. Maximum phytoplankton concentrations in the sea

    DEFF Research Database (Denmark)

    Jackson, G.A.; Kiørboe, Thomas

    2008-01-01

    A simplification of plankton dynamics using coagulation theory provides predictions of the maximum algal concentration sustainable in aquatic systems. These predictions have previously been tested successfully against results from iron fertilization experiments. We extend the test to data collect...

  7. Maximum-Likelihood Detection Of Noncoherent CPM

    Science.gov (United States)

    Divsalar, Dariush; Simon, Marvin K.

    1993-01-01

    Simplified detectors proposed for use in maximum-likelihood-sequence detection of symbols in alphabet of size M transmitted by uncoded, full-response continuous phase modulation over radio channel with additive white Gaussian noise. Structures of receivers derived from particular interpretation of maximum-likelihood metrics. Receivers include front ends, structures of which depends only on M, analogous to those in receivers of coherent CPM. Parts of receivers following front ends have structures, complexity of which would depend on N.

  8. Trade in electricity certificates: a new means for stimulating electricity from renewable energy sources: final report from the electricity certificate inquiry

    International Nuclear Information System (INIS)

    2001-01-01

    We recommend the introduction of a quota-based Swedish certificate system to promote production of electricity from renewable energy sources commencing on 1 January 2003. We recommend that the certificate system should be based on the following principles: The quota obligation should be set for the years 2003 to 2010 and for all intervening years. The quota is expressed as a share of the total amount of electricity used. It is proposed that as a guideline, a target of an increase in electricity production from renewable energy sources of 10 TWh, in a period from 2003 to 2010 inclusive, is adopted. It is estimated that approximately half of this increase can come from expansion of existing production and half from new plants. The following electricity production plants are to be entitled to certificates provided they comply with the requirement that electricity is to be produced from renewable energy sources and that they meet the environmental criteria set, including fuel requirements, where electricity is produced with the aid of: 1. wind power, 2. solar energy, 3. geothermal energy, 4. certain types of biofuel, 5. wave energy, 6. hydroelectric power at existing plants which, at the time of the Electricity Certificate law coming into effect, have a capacity not exceeding 1 500 kilowatt, 7. hydroelectric power at plants which have not been in operation after 1 July 2001 but which were commissioned after the coming into effect of the Electricity Certificate law, 8. increased installed capacity at existing hydroelectric power plants to the extent that capacity is increased by measures undertaken after 1 July 2002, and 9. hydroelectric power produced at plants, which started operation for the first time after 1 July 2002. The quota period is defined as one calendar year. Certificates may be 'banked' by those subject to quota should they have more certificates at the end of the quota period than need to be submitted. A certificate is valid for an unlimited period of

  9. Hanford Site Transuranic (TRU) Waste Certification Plan

    International Nuclear Information System (INIS)

    GREAGER, T.M.

    1999-01-01

    The Hanford Site Transuranic Waste Certification Plan establishes the programmatic framework and criteria with in which the Hanford Site ensures that contract-handled TRU wastes can be certified as compliant with the WIPP WAC and TRUPACT-II SARP

  10. Pesticide Applicator Certification in Indian Country

    Science.gov (United States)

    This website provides information about the EPA Plan for the Federal Certification of Applicators of Restricted Use Pesticides within Indian Country, including plan requirements, how to become certified, how to register for training, and who is certified.

  11. Hanford Site Transuranic (TRU) Waste Certification Plan

    Energy Technology Data Exchange (ETDEWEB)

    GREAGER, T.M.

    1999-09-09

    The Hanford Site Transuranic Waste Certification Plan establishes the programmatic framework and criteria within which the Hanford Site ensures that contract-handled TRU wastes can be certified as compliant with the WIPP WAC and TRUPACT-II SARP.

  12. Environmental certification for more sustainable imports

    International Nuclear Information System (INIS)

    Henry, Lucile; Monnoyer-Smith, Laurence; Demeulenaere, Laurence

    2017-12-01

    As France imports high quantities of products which have environmental impacts abroad due to extraction, transformations, and transports of used materials, and which are not visible for consumers, environmental certification could be a mean to reduce these impacts as it would allow consumers to identify the less polluting products, and incite producers to put such products on the market. After having discussed these issues, the author outlines key factors of success for such a certification, briefly identifies required adjustments at the technical level (requirement level, cost anticipation), and at the social and political level. She also evokes accompanying measures, and outlines that environmental certification is only a tool among others such as partnership agreements currently being negotiated between the European Union and other countries, or a combination of certification and cooperation with extracting countries (as practiced by Germany)

  13. FAA Certificated Maintenance Agencies Directory (1997)

    Science.gov (United States)

    1997-05-06

    This advisory circular (AC) transmits a consolidated directory of all : certificated Federal Aviation Administration (FAA) repair stations and : manufacturer's maintenance facilities. The repair stations and manufacturer's : maintenance facilities we...

  14. 5 CFR 1330.404 - Certification criteria.

    Science.gov (United States)

    2010-01-01

    ... PERSONNEL MANAGEMENT HUMAN RESOURCES MANAGEMENT Performance Appraisal Certification for Pay Purposes § 1330... the performance expectations for individual senior employees derive from, and clearly link to, the... and budget priorities; (2) Consultation, so that the performance expectations for senior employees...

  15. Anthropomorphic Test Drive (ATD) Certification Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The ATD Certification Laboratory consists of several test fixtures to ensure ATDs are functioning correctly and within specifications prior to use in any OP testing....

  16. Section 608 Technician Certification Test Topics

    Science.gov (United States)

    Identifies some of the topics covered on Section 608 Technician Certification tests such as ozone depletion, the Clean Air Act and Montreal Protocol, Substitute Refrigerants and oils, Refrigeration and Recovery Techniques.

  17. Lesson 3: Attorney General (AG) Certification

    Science.gov (United States)

    The AG Certification is a letter confirming legal authority to implement the electronic reporting covered by the application and enforce the affected programs using the electronic documents received under those programs.

  18. Recommendations on European data protection certification

    NARCIS (Netherlands)

    Kamara, Irene; Burnik, Jelena

    2017-01-01

    The objective of this report is to identify and analyse challenges and opportunities of data protection certification mechanisms, including seals and marks, as introduced by the GDPR, focusing also on existing initiatives and voluntary schemes.

  19. 2012 aerospace medical certification statistical handbook.

    Science.gov (United States)

    2013-12-01

    The annual Aerospace Medical Certification Statistical Handbook reports descriptive : characteristics of all active U.S. civil aviation airmen and the aviation medical examiners (AMEs) that : perform the required medical examinations. The 2012 annual...

  20. 2011 aerospace medical certification statistical handbook.

    Science.gov (United States)

    2013-01-01

    The annual Aerospace Medical Certification Statistical Handbook reports descriptive characteristics of all active U.S. civil aviation airmen and the aviation medical examiners (AMEs) that perform the required medical examinations. The 2011 annual han...

  1. Methodologies for certification of transuranic waste packages

    International Nuclear Information System (INIS)

    Christensen, R.N.; Kok, K.D.

    1980-10-01

    The objective of this study was to postulate methodologies for certification that a waste package is acceptable for disposal in a licensed geologic repository. Within the context of this report, certification means the overall process which verifies that a waste package meets the criteria or specifications established for acceptance for disposal in a repository. The overall methodology for certification will include (1) certifying authorities, (2) tests and procedures, and (3) documentation and quality assurance programs. Each criterion will require a methodology that is specific to that criterion. In some cases, different waste forms will require a different methodology. The purpose of predicting certification methodologies is to provide additional information as to what changes, if any, are needed for the TRU waste in storage

  2. Mochovce NPP experience in the certification and the use of full scope simulator

    International Nuclear Information System (INIS)

    Krenicky, L.

    1999-01-01

    The paper presents some of the Mochovce NPP experience in the full-scope simulator certification process, simulator training programs development, implementation and evaluation, the use of simulator in the all-plant emergency exercises as well as the experience in validation of plant operational procedures.(author)

  3. 40 CFR 86.095-14 - Small-volume manufacturers certification procedures.

    Science.gov (United States)

    2010-07-01

    ... General Provisions for Emission Regulations for 1977 and Later Model Year New Light-Duty Vehicles, Light... light-duty vehicles and light-duty trucks covered by a certificate of conformity conform to the regulations while being operated at any altitude locations, and a statement of the altitude at which the...

  4. System 80+{trademark} Standard Design: CESSAR design certification. Volume 11: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 11 discusses Radiation Protection, Conduct of Operations, and the Initial Test Program.

  5. Maximum entropy production rate in quantum thermodynamics

    Energy Technology Data Exchange (ETDEWEB)

    Beretta, Gian Paolo, E-mail: beretta@ing.unibs.i [Universita di Brescia, via Branze 38, 25123 Brescia (Italy)

    2010-06-01

    In the framework of the recent quest for well-behaved nonlinear extensions of the traditional Schroedinger-von Neumann unitary dynamics that could provide fundamental explanations of recent experimental evidence of loss of quantum coherence at the microscopic level, a recent paper [Gheorghiu-Svirschevski 2001 Phys. Rev. A 63 054102] reproposes the nonlinear equation of motion proposed by the present author [see Beretta G P 1987 Found. Phys. 17 365 and references therein] for quantum (thermo)dynamics of a single isolated indivisible constituent system, such as a single particle, qubit, qudit, spin or atomic system, or a Bose-Einstein or Fermi-Dirac field. As already proved, such nonlinear dynamics entails a fundamental unifying microscopic proof and extension of Onsager's reciprocity and Callen's fluctuation-dissipation relations to all nonequilibrium states, close and far from thermodynamic equilibrium. In this paper we propose a brief but self-contained review of the main results already proved, including the explicit geometrical construction of the equation of motion from the steepest-entropy-ascent ansatz and its exact mathematical and conceptual equivalence with the maximal-entropy-generation variational-principle formulation presented in Gheorghiu-Svirschevski S 2001 Phys. Rev. A 63 022105. Moreover, we show how it can be extended to the case of a composite system to obtain the general form of the equation of motion, consistent with the demanding requirements of strong separability and of compatibility with general thermodynamics principles. The irreversible term in the equation of motion describes the spontaneous attraction of the state operator in the direction of steepest entropy ascent, thus implementing the maximum entropy production principle in quantum theory. The time rate at which the path of steepest entropy ascent is followed has so far been left unspecified. As a step towards the identification of such rate, here we propose a possible

  6. Towards a certification process for tsunami early warning systems

    Science.gov (United States)

    Löwe, Peter; Wächter, Jochen; Hammitzsch, Martin

    2013-04-01

    ). TRIDEC focuses on real-time intelligent information management in Earth management and its long-term application: The technical development is based on mature system architecture models and industry standards. The use of standards already applies to the operation of individual TRIDEC reference installations and their interlinking into an integrated service infrastructure for supranational warning services. This is a first step towards best practices and service lifecycles for Early Warning Centre IT service management, including Service Level Agreements (SLA) and Service Certification. While on a global scale the integration of TEWS progresses towards Systems of Systems (SoS), there is still an absence of accredited and reliable certifications for national TEWS or regional Tsunami Early Warning Systems of Systems (TEWSoS). Concepts for TEWS operations have already been published under the guidance of the IOC, and can now be complemented by the recent research advances concerning SoS architecture. Combined with feedback from the real world, such as the NEAMwave 2012 Tsunami exercise in the Mediterranean, this can serve as a starting point to formulate initial requirements for TEWS and TEWSoS certification: Certification activities will cover the establishment of new TEWS and TEWSoS, and also both maintenance and enhancement of existing TEWS/TEWSoS. While the IOC is expected to take a central role in the development of the certification strategy, it remains to be defined which bodies will actually conduct the certification process. Certification requirements and results are likely to become a valuable information source for various target groups, ranging from national policy decision makers, government agency planners, national and local government preparedness officials, TWC staff members, Disaster Responders, the media and the insurance industry.

  7. 2012 Aerospace Medical Certification Statistical Handbook

    Science.gov (United States)

    2013-12-01

    2012 Aerospace Medical Certification Statistical Handbook Valerie J. Skaggs Ann I. Norris Civil Aerospace Medical Institute Federal Aviation...Certification Statistical Handbook December 2013 6. Performing Organization Code 7. Author(s) 8. Performing Organization Report No. Skaggs VJ, Norris AI 9...2.57 Hayfever 14,477 2.49 Asthma 12,558 2.16 Other general heart pathology (abnormal ECG, open heart surgery, etc.). Wolff-Parkinson-White syndrome

  8. [Certification assessment and quality and risk management].

    Science.gov (United States)

    Papin-Morardet, Maud

    2018-03-01

    Organised by the French National Health Authority (HAS), certification is an external assessment process which is obligatory for all public and private health facilities, whatever their size or activity. The aim is to independently evaluate the quality of the health care provision of hospitals and clinics in France. This article looks at the investigation methods and the procedure used during the certification assessment of Henri Mondor University Hospitals in 2016. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

  9. Architect’s Certification: A Problem?

    Directory of Open Access Journals (Sweden)

    Yong Kum Weng

    2015-01-01

    Full Text Available Currently the problems of some architects issuing fraudulent progress certificates for Malaysia’s housing projects result in many house buyers losing their life savings. Unfortunately, these house buyers still remain contractually responsible for all the associated, present and future financial obligations such as their bank loans. Fraudulent certification is the most frequent incident of complaints amongst the range of problems complained about to the Board of Architects, Malaysia or Lembaga Arkitek Malaysia (LAM. This paper highlights the underlying pertinent issues such as when an architect does not fully understand the ramifications, or exercise due care when performing the certifier’s role with its inherent responsibilities under the Housing Development Act (HDA and Housing Development Regulations (HDR. Also at what stage the architect is legally required to issue progressive work completion certificates, particularly the scope ranging from the inception stage through to the completion stage. This includes the relevant housing laws and regulations that enshrine the architects’ professional status and confers legal certification duties. This is designed to protect the public interest, yet many architects fail to perform this duty inde-pendently, or impartially and fairly to the new house buyers and the public at-large. Recognizing the systemic weakness, the elements that contribute to the fraudulent certification and illustrates how the fraudulent certification exploits the trust of house buyers. In the analysis, a quantitative framework was used to measure, quantify and discuss the best all round outcomes.

  10. Software Quality Certification: identifying the real obstacles

    Directory of Open Access Journals (Sweden)

    Megan Baker

    1996-05-01

    Full Text Available A case study of software certification reveals the real difficulty of certifying quality beyond superficial assessment - readers are invited to form their own conclusions. AS 3563 Software Quality Management System is the Australian version of ISO 9001, developed specifically for the software industry. For many Australian software houses, gaining certification with AS 3563 is a priority since certification has become a prerequisite to doing business with government departments and major corporations. However, the process of achieving registration with this standard is a lengthy and resource intensive process, and may have little impact on actual software quality. This case study recounts the experience of the consulting arm of one of Australia's accounting firms in its quest for certification. By using a number of specific management strategies this company was able to successfully implement AS 3563 in less than half the time usually taken to achieve certification - a feat for which its management should be congratulated. However, because the focus of the project was on gaining certification, few internal benefits have been realised despite the successful implementation of the standard.

  11. CAUSES OF VISUAL DISABILITY IN PATIENTS WITH VISUAL DISABILITY CERTIFICATES OBTAINED IN A TERTIARY CARE HOSPITAL IN MUMBAI

    Directory of Open Access Journals (Sweden)

    Vikas Vijaykumar Kamat

    2016-12-01

    Full Text Available BACKGROUND Visual disability is a major public health problem in developing countries. Ocular diseases cause partial or total blindness. Causes can be treatable or non-treatable. Non-treatable causes lead to permanent visual disability. Persons with disabilities are given certificates mentioning percentage of disability after they demand certificates for various benefits. MATERIALS AND METHODS Records of the individuals who had been issued visual disability certificates during the period of 1 st March 2011 to 30 th June 2013 were obtained from Medical Records Office of the hospital and the information was analysed. RESULTS Out of 132 individuals with visual disability certificates, 97 were males and 35 were females. Avoidable causes of visual impairment were found in 43.18% individuals who were with corneal opacity, diabetic retinopathy, glaucoma, traumatic retinal detachment and postoperative retinal detachment. Unavoidable causes were found in 56.82% individuals who were with congenital diseases, optic nerve atrophy, hereditary causes, retinitis pigmentosa and age-related macular degeneration. Maximum numbers of individuals were issued certificates of 40% visual disability and least being 20% visual disability. Maximum number of individuals (48.49% demanded disability certificates for benefit in jobs. CONCLUSION High number of congenital diseases of eye explains the need of genetic counselling. Gender-based inequality for getting visual disability certificates should be minimised through awareness and education of people. Avoiding trauma to eyes can reduce the visual disability due to corneal scarring and infections in large extent. Early diagnosis and treatment is necessary to prevent blindness from avoidable causes like diabetic retinopathy, glaucoma and retinopathy of prematurity.

  12. GPON networks certification, standard ITU G.984.x

    Directory of Open Access Journals (Sweden)

    Edison Quisnancela

    2016-12-01

    Full Text Available This article describes the methodology to certify a FTTH GPON network, in order to minimize the errors that tend to show up during the execution of this process within an optical network. The work is based on national and international technical standards, ensuring optimal performance of the network. Empirical methods are used in the field through processes characterization, measurement and analysis of results, which will identify the factors allowing that measurements are within the range set with the use of tools and equipment properly configured and updated. The need for an effective regulation is established in the certification of a FTTH GPON network to bring maximum benefits for companies providing service in the country and meeting the demand for bandwidth of the end customer, ensuring the application of new technologies helping to optimize the use of convergence oriented service, the implementation of Next Generation Networks and towards infrastructure investment in strategic sectors.

  13. LPIC-2 Linux Professional Institute Certification Study Guide Exams 201 and 202

    CERN Document Server

    Smith, Roderick W

    2011-01-01

    The first book to cover the LPIC-2 certification Linux allows developers to update source code freely, making it an excellent, low-cost, secure alternative to alternate, more expensive operating systems. It is for this reason that the demand for IT professionals to have an LPI certification is so strong. This study guide provides unparalleled coverage of the LPIC-2 objectives for exams 201 and 202. Clear and concise coverage examines all Linux administration topics while practical, real-world examples enhance your learning process. On the CD, you'll find the Sybex Test Engine, electronic flash

  14. 45 CFR 170.490 - Sunset of the temporary certification program.

    Science.gov (United States)

    2010-10-01

    ... TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT...

  15. Overview of the DOE-EM Packaging Certification Program

    International Nuclear Information System (INIS)

    Feldman, M.R.; Bennett, M.E.; Shuler, J.M.

    2009-01-01

    The U.S. Department of Transportation, in 49 CFR 173.7(d) grants the U.S. Department of Energy (DOE) the power to use 'packagings made by or under the direction of the U.S. Department of Energy... for the transportation of Class 7 materials when evaluated, approved and certified by the Department of Energy against packaging standards equivalent to those specified in 10 CFR part 71'. Via DOE Order 460.1B, DOE has established the DOE Packaging Certification Program (PCP) within the Department of Environmental Management for purposes including the certification of radioactive materials packages for DOE use. This paper will provide an overview of the programs and activities currently undertaken by the PCP in support of the safe transport of radioactive materials, including technical review of Safety Analysis Reports for Packaging, development of guidance documents and training courses, a quality assurance audit and field assessment program, database and docket management, and testing and test methodology development. The paper will also highlight the various organizations currently utilized by the PCP to meet the requirements of DOE O 460.1B, as well as some creative and effective methods that are being used to meet program objectives. The DOE Package Certification Program's primary function is to perform technical reviews of SARPs in support of the packaging certification process to ensure that the maximum protection is afforded to the public, all federal regulations are met, and the process is as time-effective and cost-effective as possible. Five additional specific functions are also supported by the PCP: development of guidance documents, training courses, a QA audit and field assessment program, database and docket management, and testing methods development. Each of these functions individually contributes to the overall mission of the PCP as defined in DOE O 460.1B. Taken as a whole, these functions represent a robust program to ensure the safety of workers

  16. Maximum gravitational redshift of white dwarfs

    International Nuclear Information System (INIS)

    Shapiro, S.L.; Teukolsky, S.A.

    1976-01-01

    The stability of uniformly rotating, cold white dwarfs is examined in the framework of the Parametrized Post-Newtonian (PPN) formalism of Will and Nordtvedt. The maximum central density and gravitational redshift of a white dwarf are determined as functions of five of the nine PPN parameters (γ, β, zeta 2 , zeta 3 , and zeta 4 ), the total angular momentum J, and the composition of the star. General relativity predicts that the maximum redshifts is 571 km s -1 for nonrotating carbon and helium dwarfs, but is lower for stars composed of heavier nuclei. Uniform rotation can increase the maximum redshift to 647 km s -1 for carbon stars (the neutronization limit) and to 893 km s -1 for helium stars (the uniform rotation limit). The redshift distribution of a larger sample of white dwarfs may help determine the composition of their cores

  17. Enacting Third-Party Certification: A Case Study of Science and Politics in Organic Shrimp Certification

    Science.gov (United States)

    Konefal, Jason; Hatanaka, Maki

    2011-01-01

    As third-party certification has become a prominent governance mechanism, conflicting understandings of it have emerged. Proponents advance third-party certification as a technical and objective governance mechanism, while critics argue that politics and relations of power characterize it. We reject this dichotomization both in terms of how TPC is…

  18. Certification of thermal solar systems in the Netherlands and monitoring the results of certification

    NARCIS (Netherlands)

    Ree, B.G.C. van der

    1996-01-01

    Due to the rapid growth of the solar energy market in the Netherlands, quality control of solar systems is well under way. An important tool to improve the infrastructure of the solar market is certification of solar energy systems. Certification in the Netherlands is being developed in two projects

  19. MAXIMUM POWEWR POINT TRACKING SYSTEM FOR PHOTOVOLTAIC STATION: A REVIEW

    Directory of Open Access Journals (Sweden)

    I. Elzein

    2015-01-01

    Full Text Available In recent years there has been a growing attention towards the use of renewable energy sources. Among them solar energy is one of the most promising green energy resources due to its environment sustainability and inexhaustibility. However photovoltaic systems (PhV suffer from big cost of equipment and low efficiency. Moreover, the solar cell V-I characteristic is nonlinear and varies with irradiation and temperature. In general, there is a unique point of PhV operation, called the Maximum Power Point (MPP, in which the PV system operates with maximum efficiency and produces its maximum output power. The location of the MPP is not known in advance, but can be located, either through calculation models or by search algorithms. Therefore MPPT techniques are important to maintain the PV array’s high efficiency. Many different techniques for MPPT are discussed. This review paper hopefully will serve as a convenient tool for future work in PhV power conversion.

  20. Maximum entropy analysis of EGRET data

    DEFF Research Database (Denmark)

    Pohl, M.; Strong, A.W.

    1997-01-01

    EGRET data are usually analysed on the basis of the Maximum-Likelihood method \\cite{ma96} in a search for point sources in excess to a model for the background radiation (e.g. \\cite{hu97}). This method depends strongly on the quality of the background model, and thus may have high systematic unce...... uncertainties in region of strong and uncertain background like the Galactic Center region. Here we show images of such regions obtained by the quantified Maximum-Entropy method. We also discuss a possible further use of MEM in the analysis of problematic regions of the sky....

  1. The Maximum Resource Bin Packing Problem

    DEFF Research Database (Denmark)

    Boyar, J.; Epstein, L.; Favrholdt, L.M.

    2006-01-01

    Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find...

  2. Shower maximum detector for SDC calorimetry

    International Nuclear Information System (INIS)

    Ernwein, J.

    1994-01-01

    A prototype for the SDC end-cap (EM) calorimeter complete with a pre-shower and a shower maximum detector was tested in beams of electrons and Π's at CERN by an SDC subsystem group. The prototype was manufactured from scintillator tiles and strips read out with 1 mm diameter wave-length shifting fibers. The design and construction of the shower maximum detector is described, and results of laboratory tests on light yield and performance of the scintillator-fiber system are given. Preliminary results on energy and position measurements with the shower max detector in the test beam are shown. (authors). 4 refs., 5 figs

  3. Topics in Bayesian statistics and maximum entropy

    International Nuclear Information System (INIS)

    Mutihac, R.; Cicuttin, A.; Cerdeira, A.; Stanciulescu, C.

    1998-12-01

    Notions of Bayesian decision theory and maximum entropy methods are reviewed with particular emphasis on probabilistic inference and Bayesian modeling. The axiomatic approach is considered as the best justification of Bayesian analysis and maximum entropy principle applied in natural sciences. Particular emphasis is put on solving the inverse problem in digital image restoration and Bayesian modeling of neural networks. Further topics addressed briefly include language modeling, neutron scattering, multiuser detection and channel equalization in digital communications, genetic information, and Bayesian court decision-making. (author)

  4. Fuzzy Controller Design Using FPGA for Photovoltaic Maximum Power Point Tracking

    OpenAIRE

    Basil M Hamed; Mohammed S. El-Moghany

    2012-01-01

    The cell has optimum operating point to be able to get maximum power. To obtain Maximum Power from photovoltaic array, photovoltaic power system usually requires Maximum Power Point Tracking (MPPT) controller. This paper provides a small power photovoltaic control system based on fuzzy control with FPGA technology design and implementation for MPPT. The system composed of photovoltaic module, buck converter and the fuzzy logic controller implemented on FPGA for controlling on/off time of MOSF...

  5. AutoBayes/CC: Combining Program Synthesis with Automatic Code Certification: System Description

    Science.gov (United States)

    Whalen, Michael; Schumann, Johann; Fischer, Bernd; Clancy, Daniel (Technical Monitor)

    2002-01-01

    Code certification is a lightweight approach to formally demonstrate software quality. It concentrates on aspects of software quality that can be defined and formalized via properties, e.g., operator safety or memory safety. Its basic idea is to require code producers to provide formal proofs that their code satisfies these quality properties. The proofs serve as certificates which can be checked independently, by the code consumer or by certification authorities, e.g., the FAA. It is the idea underlying such approaches as proof-carrying code [6]. Code certification can be viewed as a more practical version of traditional Hoare-style program verification. The properties to be verified are fairly simple and regular so that it is often possible to use an automated theorem prover to automatically discharge all emerging proof obligations. Usually, however, the programmer must still splice auxiliary annotations (e.g., loop invariants) into the program to facilitate the proofs. For complex properties or larger programs this quickly becomes the limiting factor for the applicability of current certification approaches.

  6. Limited Awareness of the Essences of Certification or Compliance Markings on Medical Devices.

    Science.gov (United States)

    Foo, Jong Yong Abdiel; Tan, Xin Ji Alan

    2017-06-01

    Medical devices have been long used for odiagnostic, therapeutic or rehabilitation purposes. Currently, they can range from a low-cost portable device that is often used for personal health monitoring to high-end sophisticated equipment that can only be operated by trained professionals. Depending on the functional purposes, there are different certification or compliance markings on the device when it is sold. One common certification marking is the Conformité Européenne affixation but this has a range of certification mark numbering for a variety of functional purposes. While the regulators and medical device manufacturers understand the associated significance and clinical implications, these may not be apparent to the professionals (using or maintaining the device) and the general public. With portable healthcare devices and mobile applications gaining popularity, better awareness of certification marking will be needed. Particularly, there are differences in the allowed functional purposes and the associated cost derivations of devices with a seemingly similar nature. A preferred approach such as an easy-to-understand notation next to any certification marking on a device can aid in differentiation without the need to digest mountainous regulatory details.

  7. Novel TPPO Based Maximum Power Point Method for Photovoltaic System

    Directory of Open Access Journals (Sweden)

    ABBASI, M. A.

    2017-08-01

    Full Text Available Photovoltaic (PV system has a great potential and it is installed more when compared with other renewable energy sources nowadays. However, the PV system cannot perform optimally due to its solid reliance on climate conditions. Due to this dependency, PV system does not operate at its maximum power point (MPP. Many MPP tracking methods have been proposed for this purpose. One of these is the Perturb and Observe Method (P&O which is the most famous due to its simplicity, less cost and fast track. But it deviates from MPP in continuously changing weather conditions, especially in rapidly changing irradiance conditions. A new Maximum Power Point Tracking (MPPT method, Tetra Point Perturb and Observe (TPPO, has been proposed to improve PV system performance in changing irradiance conditions and the effects on characteristic curves of PV array module due to varying irradiance are delineated. The Proposed MPPT method has shown better results in increasing the efficiency of a PV system.

  8. Maximum power point tracker for photovoltaic power plants

    Science.gov (United States)

    Arcidiacono, V.; Corsi, S.; Lambri, L.

    The paper describes two different closed-loop control criteria for the maximum power point tracking of the voltage-current characteristic of a photovoltaic generator. The two criteria are discussed and compared, inter alia, with regard to the setting-up problems that they pose. Although a detailed analysis is not embarked upon, the paper also provides some quantitative information on the energy advantages obtained by using electronic maximum power point tracking systems, as compared with the situation in which the point of operation of the photovoltaic generator is not controlled at all. Lastly, the paper presents two high-efficiency MPPT converters for experimental photovoltaic plants of the stand-alone and the grid-interconnected type.

  9. Nonsymmetric entropy and maximum nonsymmetric entropy principle

    International Nuclear Information System (INIS)

    Liu Chengshi

    2009-01-01

    Under the frame of a statistical model, the concept of nonsymmetric entropy which generalizes the concepts of Boltzmann's entropy and Shannon's entropy, is defined. Maximum nonsymmetric entropy principle is proved. Some important distribution laws such as power law, can be derived from this principle naturally. Especially, nonsymmetric entropy is more convenient than other entropy such as Tsallis's entropy in deriving power laws.

  10. Maximum speed of dewetting on a fiber

    NARCIS (Netherlands)

    Chan, Tak Shing; Gueudre, Thomas; Snoeijer, Jacobus Hendrikus

    2011-01-01

    A solid object can be coated by a nonwetting liquid since a receding contact line cannot exceed a critical speed. We theoretically investigate this forced wetting transition for axisymmetric menisci on fibers of varying radii. First, we use a matched asymptotic expansion and derive the maximum speed

  11. Maximum potential preventive effect of hip protectors

    NARCIS (Netherlands)

    van Schoor, N.M.; Smit, J.H.; Bouter, L.M.; Veenings, B.; Asma, G.B.; Lips, P.T.A.M.

    2007-01-01

    OBJECTIVES: To estimate the maximum potential preventive effect of hip protectors in older persons living in the community or homes for the elderly. DESIGN: Observational cohort study. SETTING: Emergency departments in the Netherlands. PARTICIPANTS: Hip fracture patients aged 70 and older who

  12. Maximum gain of Yagi-Uda arrays

    DEFF Research Database (Denmark)

    Bojsen, J.H.; Schjær-Jacobsen, Hans; Nilsson, E.

    1971-01-01

    Numerical optimisation techniques have been used to find the maximum gain of some specific parasitic arrays. The gain of an array of infinitely thin, equispaced dipoles loaded with arbitrary reactances has been optimised. The results show that standard travelling-wave design methods are not optimum....... Yagi–Uda arrays with equal and unequal spacing have also been optimised with experimental verification....

  13. correlation between maximum dry density and cohesion

    African Journals Online (AJOL)

    HOD

    represents maximum dry density, signifies plastic limit and is liquid limit. Researchers [6, 7] estimate compaction parameters. Aside from the correlation existing between compaction parameters and other physical quantities there are some other correlations that have been investigated by other researchers. The well-known.

  14. Weak scale from the maximum entropy principle

    Science.gov (United States)

    Hamada, Yuta; Kawai, Hikaru; Kawana, Kiyoharu

    2015-03-01

    The theory of the multiverse and wormholes suggests that the parameters of the Standard Model (SM) are fixed in such a way that the radiation of the S3 universe at the final stage S_rad becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the SM, we can check whether S_rad actually becomes maximum at the observed values. In this paper, we regard S_rad at the final stage as a function of the weak scale (the Higgs expectation value) vh, and show that it becomes maximum around vh = {{O}} (300 GeV) when the dimensionless couplings in the SM, i.e., the Higgs self-coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by vh ˜ T_{BBN}2 / (M_{pl}ye5), where ye is the Yukawa coupling of electron, T_BBN is the temperature at which the Big Bang nucleosynthesis starts, and M_pl is the Planck mass.

  15. The maximum-entropy method in superspace

    Czech Academy of Sciences Publication Activity Database

    van Smaalen, S.; Palatinus, Lukáš; Schneider, M.

    2003-01-01

    Roč. 59, - (2003), s. 459-469 ISSN 0108-7673 Grant - others:DFG(DE) XX Institutional research plan: CEZ:AV0Z1010914 Keywords : maximum-entropy method, * aperiodic crystals * electron density Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.558, year: 2003

  16. Achieving maximum sustainable yield in mixed fisheries

    NARCIS (Netherlands)

    Ulrich, Clara; Vermard, Youen; Dolder, Paul J.; Brunel, Thomas; Jardim, Ernesto; Holmes, Steven J.; Kempf, Alexander; Mortensen, Lars O.; Poos, Jan Jaap; Rindorf, Anna

    2017-01-01

    Achieving single species maximum sustainable yield (MSY) in complex and dynamic fisheries targeting multiple species (mixed fisheries) is challenging because achieving the objective for one species may mean missing the objective for another. The North Sea mixed fisheries are a representative example

  17. 5 CFR 534.203 - Maximum stipends.

    Science.gov (United States)

    2010-01-01

    ... maximum stipend established under this section. (e) A trainee at a non-Federal hospital, clinic, or medical or dental laboratory who is assigned to a Federal hospital, clinic, or medical or dental... Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY UNDER OTHER SYSTEMS Student...

  18. Minimal length, Friedmann equations and maximum density

    Energy Technology Data Exchange (ETDEWEB)

    Awad, Adel [Center for Theoretical Physics, British University of Egypt,Sherouk City 11837, P.O. Box 43 (Egypt); Department of Physics, Faculty of Science, Ain Shams University,Cairo, 11566 (Egypt); Ali, Ahmed Farag [Centre for Fundamental Physics, Zewail City of Science and Technology,Sheikh Zayed, 12588, Giza (Egypt); Department of Physics, Faculty of Science, Benha University,Benha, 13518 (Egypt)

    2014-06-16

    Inspired by Jacobson’s thermodynamic approach, Cai et al. have shown the emergence of Friedmann equations from the first law of thermodynamics. We extend Akbar-Cai derivation http://dx.doi.org/10.1103/PhysRevD.75.084003 of Friedmann equations to accommodate a general entropy-area law. Studying the resulted Friedmann equations using a specific entropy-area law, which is motivated by the generalized uncertainty principle (GUP), reveals the existence of a maximum energy density closed to Planck density. Allowing for a general continuous pressure p(ρ,a) leads to bounded curvature invariants and a general nonsingular evolution. In this case, the maximum energy density is reached in a finite time and there is no cosmological evolution beyond this point which leaves the big bang singularity inaccessible from a spacetime prospective. The existence of maximum energy density and a general nonsingular evolution is independent of the equation of state and the spacial curvature k. As an example we study the evolution of the equation of state p=ωρ through its phase-space diagram to show the existence of a maximum energy which is reachable in a finite time.

  19. Implementation of thermographers' certification in Brazil

    Science.gov (United States)

    dos Santos, Laerte; Alves, Luiz M.; da Costa Bortoni, Edson

    2011-05-01

    In recent years Brazil has experienced extraordinary growth despite the recent economic global crisis. The demand for infrared thermography products and services has accompanied this growth. Like other non-destructive testing and inspection, the results obtained by thermography are highly dependent on the skills of thermographer. Therefore, it is very important to establish a serious and recognized process of certification to assess thermographers' qualifications and help services suppliers to establish credibility with their customers and increase the confidence of these costumers on the quality of these services. The Brazilian Society of Non-Destructive Testing and Inspection, ABENDI, a non-profitable, private technical-scientific entity, recognized nationally and internationally, has observed the necessity of starting a process for certification of thermographers in Brazil. With support of a work group composed by experts from oil and energy industries, transportation, universities and manufactures, the activities started in 2005. This paper describes the economic background required for installation of the certification process, its initial steps, the main characteristics of the Brazilian certification and the expectation for initiating the certification process.

  20. Combating pharmacist shortage through labor certification.

    Science.gov (United States)

    Maswoswe, J J; Stewart, K R; Enigbokan, M; Egbunike, I; Jackson, D M

    1994-06-01

    Several solutions, ranging from increased technician duties to salary raises, automation, and increasing job satisfaction, have been presented in the literature as methods of assuaging the pharmacist shortage. Although a significant portion of pharmacy graduates from American pharmacy colleges are foreign nationals, no marketing strategies have been elucidated in the retention and recruitment of foreign nationals through labor certification. Labor certifications are generally approved by the Secretary of Labor if the following factors have been verified: 1) there are not sufficient United States workers who are able, willing, qualified, and available for employment; and 2) the employment of the foreign national will not adversely affect the wages and working conditions of U.S. workers similarly employed. When properly understood, the labor certification process is a test of the job market where foreigners, by virtue of their skills and qualifications, attain certification which subsequently leads to permanent residency (green card). The objective of this report is to elucidate the tedious yet effective method of retaining American-educated foreign nationals through labor certification.

  1. Overview of the DOE packaging certification process

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Y.Y.; Carlson, R.D. [Argonne National Lab., IL (United States); Carlson, R.W. [Lawrence Livermore National Lab., CA (United States); Kapoor, A. [USDOE, Washington, DC (United States)

    1995-12-31

    This paper gives an overview of the DOE packaging certification process, which is implemented by the Office of Facility Safety Analysis, under the Assistance Secretary for Environment, Safety and Health, for packagings that are not used for weapons and weapons components, nor for naval nuclear propulsion. The overview will emphasize Type B packagings and the Safety Analysis Report for Packaging (SARP) review that parallels the NRC packaging review. Other important elements in the DOE packaging certification program, such as training, methods development, data bases, and technical assistance, are also emphasized, because they have contributed significantly to the improvement of the certification process since DOE consolidated its packaging certification function in 1985. The paper finishes with a discussion of the roles and functions of the DOE Packaging Safety Review Steering Committee, which is chartered to address issues and concerns of interest to the DOE packaging and transportation safety community. Two articles related to DOE packaging certification were published earlier on the SARP review procedures and the DOE Packaging Review Guide. These articles may be consulted for additional information.

  2. Obtaining your annual internal taxation certificate

    CERN Document Server

    2006-01-01

    (cf. Article R IV 2.04 of the Staff Regulations) Your annual internal taxation certificate will state the taxable amount of your CERN remuneration, payments and other financial benefits and the amount of tax levied by the Organization during the previous financial year. In France, your tax return must be accompanied by this certificate. Current Members of the Personnel (including Members of the Personnel participating in a pre-retirement programme): - You will receive an e-mail containing a link to your printable annual certificate, which will be stored together with your pay and leave statements (e-Payslips). - You can also access your annual certificate via https://hrt.cern.ch (open 'My Payslips' at the bottom of the main menu.) - If you experience any technical difficulties in accessing your annual certificate (e.g. invalid AIS login or password), please contact CERN's AIS support team at ais.support@cern.ch. Former Members of the Personnel:- If you remember your AIS login and password, you can acc...

  3. Experience gained with certification of instruments for the system for nuclear material physical protection, accounting, and control

    International Nuclear Information System (INIS)

    Gus'kov, O.M.; Egorov, V.V.; Morozov, O.S.; Novikov, V.M.

    1999-01-01

    Results of the tests have confirmed the expedience of certification of the equipment, especially imported items. For the use of imported equipment at Russian facilities, it is justified to accommodate the accompanying documents thereto for the Russian standards. Equipment items shipped to Russia should be prepared for the certification tests and/or operation. When taking decision on the certification of imported equipment, it is expedient to preliminarily estimate the instrument's parameters and its operation in Russia. To solve the question whether the imported equipment is usable for Russia and what engineering support and maintenance is needed for its operation, it would be justified to create the Center for engineering support of instruments to be used for nuclear material protection, control and accounting on the basis of one of institutes dealing with the development of instruments for these application [ru

  4. Maximum surface level and temperature histories for Hanford waste tanks

    International Nuclear Information System (INIS)

    Flanagan, B.D.; Ha, N.D.; Huisingh, J.S.

    1994-01-01

    Radioactive defense waste resulting from the chemical processing of spent nuclear fuel has been accumulating at the Hanford Site since 1944. This waste is stored in underground waste-storage tanks. The Hanford Site Tank Farm Facilities Interim Safety Basis (ISB) provides a ready reference to the safety envelope for applicable tank farm facilities and installations. During preparation of the ISB, tank structural integrity concerns were identified as a key element in defining the safety envelope. These concerns, along with several deficiencies in the technical bases associated with the structural integrity issues and the corresponding operational limits/controls specified for conduct of normal tank farm operations are documented in the ISB. Consequently, a plan was initiated to upgrade the safety envelope technical bases by conducting Accelerated Safety Analyses-Phase 1 (ASA-Phase 1) sensitivity studies and additional structural evaluations. The purpose of this report is to facilitate the ASA-Phase 1 studies and future analyses of the single-shell tanks (SSTs) and double-shell tanks (DSTs) by compiling a quantitative summary of some of the past operating conditions the tanks have experienced during their existence. This report documents the available summaries of recorded maximum surface levels and maximum waste temperatures and references other sources for more specific data

  5. 45 CFR 170.455 - Testing and certification to newer versions of certain standards.

    Science.gov (United States)

    2010-10-01

    ... INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.455 Testing and certification to newer versions of certain standards. (a) ONC-ATCBs...

  6. 45 CFR 170.465 - Revocation of authorized testing and certification body status.

    Science.gov (United States)

    2010-10-01

    ... INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.465 Revocation of authorized testing and certification body status. (a) Type-1...

  7. ISO and software quality assurance - licensing and certification of software professionals

    Energy Technology Data Exchange (ETDEWEB)

    Hare, J.; Rodin, L.

    1997-11-01

    This report contains viewgraphs on licensing and certifing of software professionals. Discussed in this report are: certification programs; licensing programs; why became certified; certification as a condition of empolyment; certification requirements; and examination structures.

  8. Maximum Principles and Boundary Value Problems for First-Order Neutral Functional Differential Equations

    Directory of Open Access Journals (Sweden)

    Domoshnitsky Alexander

    2009-01-01

    Full Text Available We obtain the maximum principles for the first-order neutral functional differential equation where , and are linear continuous operators, and are positive operators, is the space of continuous functions, and is the space of essentially bounded functions defined on . New tests on positivity of the Cauchy function and its derivative are proposed. Results on existence and uniqueness of solutions for various boundary value problems are obtained on the basis of the maximum principles.

  9. Facility certification program for coal miners pneumoconiosis

    International Nuclear Information System (INIS)

    Trout, E.D.; Kelley, J.P.; Larson, V.L.; Herbert, G.L.

    1976-01-01

    Public Law 91-173, often referred to as the Black Lung Law, called for a chest radiograph of all active coal miners at stated intervals. The National Institute for Occupational Safety and Health was responsible for carrying out the provisions of the law. Among other requirements was a provision for certification of radiological facilities where radiological examinations would be provide. A test object to be radiographed by each such facility was designed and sent to those facilities applying for certification. To date, 284 facilities have applied for certification of which 215 have been approved. A record has been kept of the number of times any approved facility submitted radiographs before approval. A complete listing of the types of equipment used, personnel qualifications and other pertinent data will be reported

  10. Certification of power generation from sewage gas

    International Nuclear Information System (INIS)

    Ronchetti, C.

    2004-01-01

    This article discusses the certification of power generated from sewage gas in packaged co-generation units in Switzerland. Since 2003, such electricity can be sold as 'green power' to consumers, who pay an additional charge for this ecologically generated power. Since the eco-balance of this electricity generated in wastewater treatment plant is considered as being excellent, the prestigious 'Naturemade Star' label has been awarded to it. This label sets most stringent requirements. The Canius wastewater treatment plant in the 'Lenzerheide' in eastern Switzerland is taken as an example to illustrate the procedure that has to be gone through to receive certification. This certification is carried out by independent auditors and guarantees that the 'green' electricity offered by the utility meets the high ecological criteria set by the label

  11. Sustainability, certification, and regulation of biochar

    Directory of Open Access Journals (Sweden)

    Frank G. A. Verheijen

    2012-05-01

    Full Text Available Biochar has a relatively long half-life in soil and can fundamentally alter soil properties, processes, and ecosystem services. The prospect of global-scale biochar application to soils highlights the importance of a sophisticated and rigorous certification procedure. The objective of this work was to discuss the concept of integrating biochar properties with environmental and socioeconomic factors, in a sustainable biochar certification procedure that optimizes complementarity and compatibility between these factors over relevant time periods. Biochar effects and behavior should also be modelled at temporal scales similar to its expected functional lifetime in soils. Finally, when existing soil data are insufficient, soil sampling and analysis procedures need to be described as part of a biochar certification procedure.

  12. Compositional Safety Analysis using Barrier Certificates

    DEFF Research Database (Denmark)

    Sloth, Christoffer; Pappas, George J.; Wisniewski, Rafael

    2012-01-01

    This paper proposes a compositional method for verifying the safety of a dynamical system, given as an interconnection of subsystems. The safety verification is conducted by the use of the barrier certificate method; hence, the contribution of this paper is to show how to obtain compositional...... conditions for safety verification. We show how to formulate the verification problem, as a composition of coupled subproblems, each given for one subsystem. Furthermore, we show how to find the compositional barrier certificates via linear and sum of squares programming problems. The proposed method makes...... it possible to verify the safety of higher dimensional systems, than the method for centrally computed barrier certificates. This is demonstrated by verifying the safety of an emergency shutdown of a wind turbine....

  13. Justification of working out of combine harvesters technological certificate

    Directory of Open Access Journals (Sweden)

    G. E. Chepurin

    2016-01-01

    Full Text Available Dynamics of grain crops productivity in the main grain growing regions of Siberian Federal District is presented. Major factors shoud be considered at justification of a class of combine harvesters for their effective operation in various climatic and working conditions. loading efficiency of a combine thresher depends on productivity and operating width of windrowers or headers at straight-cutting and windrowing. A tailings maintenance in the threshed grain heap influences on the harvester capacity. Certificate capacity of combines of a class of 5-12 kg/s at the 1.5 percent admissible level of losses behind a combine thresher is depending on the tailings maintenance in the threshed grain heap. In accordance to analysis the capacity of combines of any class of the classical design increases by 1.45 times at reduction of a straw content from 1.5 to 0.7 relative to standard indicators, and decreases by 1.16 times at increase of this parameter to 2.3. The combine of a class of 7 kg/s is completely loaded when pickup threshing by harvesters with a operating width of 20; 16 and 12 m at a speed of movement 7.2; 9.0 and 12.0 km/h respectively. The combine of a class of 10 kg/s at crop productivity of 1.8 t/ha will be completely loaded when pickup threshing if the operating width is 20 m and the speed equals 12 km/h, and at the width of 16 m speed has to make 13 km/h. The content of the technological certificate by the example of use of combines of a class of 7 kg/s (GS-07 and 10 kg/s (GS-10 is proved. The algorithm of determination of the movement speed is presented. Its use provides certificate loading of a thresher when threshing of grain crops with different productivity at straight-cutting and windrowing.

  14. Neurosurgery certification in member societies of the World Federation of Neurosurgical Societies: Asia.

    Science.gov (United States)

    Gasco, Jaime; Braun, Jonathan D; McCutcheon, Ian E; Black, Peter M

    2011-01-01

    To objectively compare the complexity and diversity of the certification process in neurological surgery in member societies of the World Federation of Neurosurgical Societies. This study centers in continental Asia. We provide here an analysis based on the responses provided to a 13-item survey. The data received were analyzed, and three Regional Complexity Scores (RCS) were designed. To compare national board experience, eligibility requirements for access to the certification process, and the obligatory nature of the examinations, an RCS-Organizational score was created (20 points maximum). To analyze the complexity of the examination, an RCS-Components score was designed (20 points maximum). The sum of both is presented in a Global RCS score. Only those countries that responded to the survey and presented nationwide homogeneity in the conduction of neurosurgery examinations could be included within the scoring system. In addition, a descriptive summary of the certification process per responding society is also provided. On the basis of the data provided by our RCS system, the highest global RCS was achieved by South Korea and Malaysia (21/40 points) followed by the joint examination of Singapore and Hong-Kong (FRCS-Ed) (20/40 points), Japan (17/40 points), the Philippines (15/40 points), and Taiwan (13 points). The experience from these leading countries should be of value to all countries within Asia. Copyright © 2011 Elsevier Inc. All rights reserved.

  15. Maximum concentrations at work and maximum biologically tolerable concentration for working materials 1991

    International Nuclear Information System (INIS)

    1991-01-01

    The meaning of the term 'maximum concentration at work' in regard of various pollutants is discussed. Specifically, a number of dusts and smokes are dealt with. The valuation criteria for maximum biologically tolerable concentrations for working materials are indicated. The working materials in question are corcinogeneous substances or substances liable to cause allergies or mutate the genome. (VT) [de

  16. 75 FR 43840 - Inflation Adjustment of the Ordinary Maximum and Aggravated Maximum Civil Monetary Penalties for...

    Science.gov (United States)

    2010-07-27

    ...-17530; Notice No. 2] RIN 2130-ZA03 Inflation Adjustment of the Ordinary Maximum and Aggravated Maximum... remains at $250. These adjustments are required by the Federal Civil Penalties Inflation Adjustment Act [email protected] . SUPPLEMENTARY INFORMATION: The Federal Civil Penalties Inflation Adjustment Act of 1990...

  17. Twenty-five years of maximum-entropy principle

    Science.gov (United States)

    Kapur, J. N.

    1983-04-01

    The strengths and weaknesses of the maximum entropy principle (MEP) are examined and some challenging problems that remain outstanding at the end of the first quarter century of the principle are discussed. The original formalism of the MEP is presented and its relationship to statistical mechanics is set forth. The use of MEP for characterizing statistical distributions, in statistical inference, nonlinear spectral analysis, transportation models, population density models, models for brand-switching in marketing and vote-switching in elections is discussed. Its application to finance, insurance, image reconstruction, pattern recognition, operations research and engineering, biology and medicine, and nonparametric density estimation is considered.

  18. Distributed maximum power point tracking in wind micro-grids

    Directory of Open Access Journals (Sweden)

    Carlos Andrés Ramos-Paja

    2012-06-01

    Full Text Available With the aim of reducing the hardware requirements in micro-grids based on wind generators, a distributed maximum power point tracking algorithm is proposed. Such a solution reduces the amount of current sensors and processing devices to maximize the power extracted from the micro-grid, reducing the application cost. The analysis of the optimal operating points of the wind generator was performed experimentally, which in addition provides realistic model parameters. Finally, the proposed solution was validated by means of detailed simulations performed in the power electronics software PSIM, contrasting the achieved performance with traditional solutions.

  19. Maximum allowable heat flux for a submerged horizontal tube bundle

    International Nuclear Information System (INIS)

    McEligot, D.M.

    1995-01-01

    For application to industrial heating of large pools by immersed heat exchangers, the socalled maximum allowable (or open-quotes criticalclose quotes) heat flux is studied for unconfined tube bundles aligned horizontally in a pool without forced flow. In general, we are considering boiling after the pool reaches its saturation temperature rather than sub-cooled pool boiling which should occur during early stages of transient operation. A combination of literature review and simple approximate analysis has been used. To date our main conclusion is that estimates of q inch chf are highly uncertain for this configuration

  20. Design of a wind turbine rotor for maximum aerodynamic efficiency

    DEFF Research Database (Denmark)

    Johansen, Jeppe; Aagaard Madsen, Helge; Gaunaa, Mac

    2009-01-01

    The design of a three-bladed wind turbine rotor is described, where the main focus has been highest possible mechanical power coefficient, CP, at a single operational condition. Structural, as well as off-design, issues are not considered, leading to a purely theoretical design for investigating...... maximum aerodynamic efficiency. The rotor is designed assuming constant induction for most of the blade span, but near the tip region, a constant load is assumed instead. The rotor design is obtained using an actuator disc model, and is subsequently verified using both a free-wake lifting line method...

  1. Zipf's law, power laws and maximum entropy

    International Nuclear Information System (INIS)

    Visser, Matt

    2013-01-01

    Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines—from astronomy to demographics to software structure to economics to linguistics to zoology, and even warfare. A recent model of random group formation (RGF) attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present paper I argue that the specific cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified. (paper)

  2. Maximum-entropy description of animal movement.

    Science.gov (United States)

    Fleming, Chris H; Subaşı, Yiğit; Calabrese, Justin M

    2015-03-01

    We introduce a class of maximum-entropy states that naturally includes within it all of the major continuous-time stochastic processes that have been applied to animal movement, including Brownian motion, Ornstein-Uhlenbeck motion, integrated Ornstein-Uhlenbeck motion, a recently discovered hybrid of the previous models, and a new model that describes central-place foraging. We are also able to predict a further hierarchy of new models that will emerge as data quality improves to better resolve the underlying continuity of animal movement. Finally, we also show that Langevin equations must obey a fluctuation-dissipation theorem to generate processes that fall from this class of maximum-entropy distributions when the constraints are purely kinematic.

  3. Pareto versus lognormal: a maximum entropy test.

    Science.gov (United States)

    Bee, Marco; Riccaboni, Massimo; Schiavo, Stefano

    2011-08-01

    It is commonly found that distributions that seem to be lognormal over a broad range change to a power-law (Pareto) distribution for the last few percentiles. The distributions of many physical, natural, and social events (earthquake size, species abundance, income and wealth, as well as file, city, and firm sizes) display this structure. We present a test for the occurrence of power-law tails in statistical distributions based on maximum entropy. This methodology allows one to identify the true data-generating processes even in the case when it is neither lognormal nor Pareto. The maximum entropy approach is then compared with other widely used methods and applied to different levels of aggregation of complex systems. Our results provide support for the theory that distributions with lognormal body and Pareto tail can be generated as mixtures of lognormally distributed units.

  4. Maximum likelihood estimation for integrated diffusion processes

    DEFF Research Database (Denmark)

    Baltazar-Larios, Fernando; Sørensen, Michael

    We propose a method for obtaining maximum likelihood estimates of parameters in diffusion models when the data is a discrete time sample of the integral of the process, while no direct observations of the process itself are available. The data are, moreover, assumed to be contaminated...... EM-algorithm to obtain maximum likelihood estimates of the parameters in the diffusion model. As part of the algorithm, we use a recent simple method for approximate simulation of diffusion bridges. In simulation studies for the Ornstein-Uhlenbeck process and the CIR process the proposed method works...... by measurement errors. Integrated volatility is an example of this type of observations. Another example is ice-core data on oxygen isotopes used to investigate paleo-temperatures. The data can be viewed as incomplete observations of a model with a tractable likelihood function. Therefore we propose a simulated...

  5. Maximum parsimony on subsets of taxa.

    Science.gov (United States)

    Fischer, Mareike; Thatte, Bhalchandra D

    2009-09-21

    In this paper we investigate mathematical questions concerning the reliability (reconstruction accuracy) of Fitch's maximum parsimony algorithm for reconstructing the ancestral state given a phylogenetic tree and a character. In particular, we consider the question whether the maximum parsimony method applied to a subset of taxa can reconstruct the ancestral state of the root more accurately than when applied to all taxa, and we give an example showing that this indeed is possible. A surprising feature of our example is that ignoring a taxon closer to the root improves the reliability of the method. On the other hand, in the case of the two-state symmetric substitution model, we answer affirmatively a conjecture of Li, Steel and Zhang which states that under a molecular clock the probability that the state at a single taxon is a correct guess of the ancestral state is a lower bound on the reconstruction accuracy of Fitch's method applied to all taxa.

  6. 15 CFR 50.60 - Request for certification.

    Science.gov (United States)

    2010-01-01

    ... set cost of the product (one certificate). Certification fees may increase somewhat if the customer.... These governmental units include a variety of legally defined general- and special-purpose governmental...

  7. 77 FR 72324 - Export Trade Certificate of Review

    Science.gov (United States)

    2012-12-05

    ... DEPARTMENT OF COMMERCE International Trade Administration [Application No. 85-17A18] Export Trade Certificate of Review ACTION: Notice of Application to Amend the Export Trade Certificate of Review Issued to... to amend an Export [[Page 72325

  8. 27 CFR 5.55 - Certificates of label approval.

    Science.gov (United States)

    2010-04-01

    ..., DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF DISTILLED SPIRITS Requirements for Approval of... certificates of label approval and certificates of exemption from label approval, as well as appeal procedures...

  9. An eCertificate Program in Transportation Planning

    Science.gov (United States)

    2012-08-01

    In this project, researchers developed a proposal to extend the delivery of the recently developed : Graduate Certificate in Transportation Planning at Texas A&M University (TAMU) to a wider audience via : distance education (online or eCertificate)....

  10. Maximum entropy analysis of liquid diffraction data

    International Nuclear Information System (INIS)

    Root, J.H.; Egelstaff, P.A.; Nickel, B.G.

    1986-01-01

    A maximum entropy method for reducing truncation effects in the inverse Fourier transform of structure factor, S(q), to pair correlation function, g(r), is described. The advantages and limitations of the method are explored with the PY hard sphere structure factor as model input data. An example using real data on liquid chlorine, is then presented. It is seen that spurious structure is greatly reduced in comparison to traditional Fourier transform methods. (author)

  11. A Maximum Resonant Set of Polyomino Graphs

    Directory of Open Access Journals (Sweden)

    Zhang Heping

    2016-05-01

    Full Text Available A polyomino graph P is a connected finite subgraph of the infinite plane grid such that each finite face is surrounded by a regular square of side length one and each edge belongs to at least one square. A dimer covering of P corresponds to a perfect matching. Different dimer coverings can interact via an alternating cycle (or square with respect to them. A set of disjoint squares of P is a resonant set if P has a perfect matching M so that each one of those squares is M-alternating. In this paper, we show that if K is a maximum resonant set of P, then P − K has a unique perfect matching. We further prove that the maximum forcing number of a polyomino graph is equal to the cardinality of a maximum resonant set. This confirms a conjecture of Xu et al. [26]. We also show that if K is a maximal alternating set of P, then P − K has a unique perfect matching.

  12. Automatic maximum entropy spectral reconstruction in NMR

    International Nuclear Information System (INIS)

    Mobli, Mehdi; Maciejewski, Mark W.; Gryk, Michael R.; Hoch, Jeffrey C.

    2007-01-01

    Developments in superconducting magnets, cryogenic probes, isotope labeling strategies, and sophisticated pulse sequences together have enabled the application, in principle, of high-resolution NMR spectroscopy to biomolecular systems approaching 1 megadalton. In practice, however, conventional approaches to NMR that utilize the fast Fourier transform, which require data collected at uniform time intervals, result in prohibitively lengthy data collection times in order to achieve the full resolution afforded by high field magnets. A variety of approaches that involve nonuniform sampling have been proposed, each utilizing a non-Fourier method of spectrum analysis. A very general non-Fourier method that is capable of utilizing data collected using any of the proposed nonuniform sampling strategies is maximum entropy reconstruction. A limiting factor in the adoption of maximum entropy reconstruction in NMR has been the need to specify non-intuitive parameters. Here we describe a fully automated system for maximum entropy reconstruction that requires no user-specified parameters. A web-accessible script generator provides the user interface to the system

  13. maximum neutron flux at thermal nuclear reactors

    International Nuclear Information System (INIS)

    Strugar, P.

    1968-10-01

    Since actual research reactors are technically complicated and expensive facilities it is important to achieve savings by appropriate reactor lattice configurations. There is a number of papers, and practical examples of reactors with central reflector, dealing with spatial distribution of fuel elements which would result in higher neutron flux. Common disadvantage of all the solutions is that the choice of best solution is done starting from the anticipated spatial distributions of fuel elements. The weakness of these approaches is lack of defined optimization criteria. Direct approach is defined as follows: determine the spatial distribution of fuel concentration starting from the condition of maximum neutron flux by fulfilling the thermal constraints. Thus the problem of determining the maximum neutron flux is solving a variational problem which is beyond the possibilities of classical variational calculation. This variational problem has been successfully solved by applying the maximum principle of Pontrjagin. Optimum distribution of fuel concentration was obtained in explicit analytical form. Thus, spatial distribution of the neutron flux and critical dimensions of quite complex reactor system are calculated in a relatively simple way. In addition to the fact that the results are innovative this approach is interesting because of the optimization procedure itself [sr

  14. A West Valley Demonstration Project Milestone - Achieving Certification to Ship Waste to the Nevada Test Site

    International Nuclear Information System (INIS)

    Jackson, J. P.; Pastor, R. S.

    2002-01-01

    The West Valley Demonstration Project (WVDP) has successfully pretreated and vitrified nearly all of the 600,000 gallons of liquid high-level radioactive waste that was generated at the site of the only commercial nuclear fuel reprocessing plant to have operated in the United States. Low-level waste (LLW) generated during the course of the cleanup effort now requires disposal. Currently the WVDP only ships Class A LLW for off-site disposal. It has been shipping Class A wastes to Envirocare of Utah, Inc. since 1997. However, the WVDP may also have a future need to ship Class B and Class C waste, which Envirocare is not currently authorized to accept. The Nevada Test Site (NTS), a U.S. Department of Energy (DOE) facility, can accept all three waste classifications. The WVDP set a goal to receive certification to begin shipping Class A wastes to NTS by 2001. Formal certification/approval was granted by the DOE Nevada Operations Office on July 12, 2001. This paper discusses how the WVDP contractor, West Valley Nuclear Services Company (WVNSCO), completed the activities required to achieve NTS certification in 2001 to ship waste to its facility. The information and lessons learned provided are significant because the WVDP is the only new generator receiving certification based on an NTS audit in January 2001 that resulted in no findings and only two observations--a rating that is unparalleled in the DOE Complex

  15. Accurate Maximum Power Tracking in Photovoltaic Systems Affected by Partial Shading

    Directory of Open Access Journals (Sweden)

    Pierluigi Guerriero

    2015-01-01

    Full Text Available A maximum power tracking algorithm exploiting operating point information gained on individual solar panels is presented. The proposed algorithm recognizes the presence of multiple local maxima in the power voltage curve of a shaded solar field and evaluates the coordinated of the absolute maximum. The effectiveness of the proposed approach is evidenced by means of circuit level simulation and experimental results. Experiments evidenced that, in comparison with a standard perturb and observe algorithm, we achieve faster convergence in normal operating conditions (when the solar field is uniformly illuminated and we accurately locate the absolute maximum power point in partial shading conditions, thus avoiding the convergence on local maxima.

  16. 14 CFR Appendix J to Part 36 - Alternative Noise Certification Procedure for Helicopters Under Subpart H Having a Maximum...

    Science.gov (United States)

    2010-01-01

    ... this appendix. (b) A test series must consist of at least six flights. The number of level flights made... account for any variation in the calibration value. (iii) A performance calibration analysis of each piece... insertion devices, must have been made during the six calendar months proceeding the beginning of the...

  17. Undergraduates' Intentions to Take Examinations for Professional Certification: Examinations of Four Competing Models

    Science.gov (United States)

    Cheng, Pi-Yueh; Hsu, Ping-Kun; Chiou, Wen-Bin

    2012-01-01

    Previous research on professional certification has primarily focused on graduate certificates in intensive care nursing, writing certificates for practitioners, maintenance of certification in radiation oncology, and the certification of teachers and surgeons. Research on certification in the domain of business and management from an…

  18. Introduction of China's Compulsory Product Certification System (Ⅰ)

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ Why does China establish a new Compulso-ry Product Certification System? For a long time, our compulsory product certification system has had problems such as lack of a unified management department, repeated assessments,repeated charging and no separation between certification activities and behaviors of law enforcement.The most obvious problem is that two certification management systems exist respectively for domestic products and imported products.

  19. Emf, maximum power and efficiency of fuel cells

    International Nuclear Information System (INIS)

    Gaggioli, R.A.; Dunbar, W.R.

    1990-01-01

    This paper discusses the ideal voltage of steady-flow fuel cells usually expressed by Emf = -ΔG/nF where ΔG is the Gibbs free energy of reaction for the oxidation of the fuel at the supposed temperature of operation of the cell. Furthermore, the ideal power of the cell is expressed as the product of the fuel flow rate with this emf, and the efficiency of a real fuel cell, sometimes called the Gibbs efficiency, is defined as the ratio of the actual power output to this ideal power. Such viewpoints are flawed in several respects. While it is true that if a cell operates isothermally the maximum conceivable work output is equal to the difference between the Gibbs free energy of the incoming reactants and that of the leaving products, nevertheless, even if the cell operates isothermally, the use of the conventional ΔG of reaction assumes that the products of reaction leave separately from one another (and from any unused fuel), and when ΔS of reaction is positive it assumes that a free heat source exists at the operating temperature, whereas if ΔS is negative it neglects the potential power which theoretically could be obtained form the heat released during oxidation. Moreover, the usual cell does not operate isothermally but (virtually) adiabatically

  20. Federal Aviation Administration (FAA airworthiness certification for ceramic matrix composite components in civil aircraft systems

    Directory of Open Access Journals (Sweden)

    Gonczy Stephen T.

    2015-01-01

    Full Text Available Ceramic matrix composites (CMCs are being designed and developed for engine and exhaust components in commercial aviation, because they offer higher temperature capabilities, weight savings, and improved durability compared to metals. The United States Federal Aviation Administration (FAA issues and enforces regulations and minimum standards covering the safe manufacture, operation, and maintenance of civil aircraft. As new materials, these ceramic composite components will have to meet the certification regulations of the FAA for “airworthiness”. The FAA certification process is defined in the Federal Aviation Regulations (Title 14 of the Code of Federal Regulations, FAA policy statements, orders, advisory circulars, technical standard orders, and FAA airworthiness directives. These regulations and documents provide the fundamental requirements and guidelines for design, testing, manufacture, quality assurance, registration, operation, inspection, maintenance, and repair of aircraft systems and parts. For metallic parts in aircraft, the FAA certification and compliance process is well-established for type and airworthiness certification, using ASTM and SAE standards, the MMPDS data handbook, and FAA advisory circulars. In a similar manner for polymer matrix composites (PMC, the PMC industry and the FAA have jointly developed and are refining parallel guidelines for polymer matrix composites (PMCs, using guidance in FAA circulars and the CMH-17 PMC handbook. These documents discuss design methods and codes, material testing, property data development, life/durability assessment, production processes, QA procedures, inspection methods, operational limits, and repairs for PMCs. For ceramic composites, the FAA and the CMC and aerospace community are working together (primarily through the CMH-17 CMC handbook to define and codify key design, production, and regulatory issues that have to be addressed in the certification of CMC components in

  1. Simultaneous Authentication and Certification of Arms-Control Measurement Systems

    Energy Technology Data Exchange (ETDEWEB)

    MacArthur, Duncan W. [Los Alamos National Laboratory; Hauck, Danielle K. [Los Alamos National Laboratory; Thron, Jonathan L. [Los Alamos National Laboratory

    2012-07-09

    Most arms-control-treaty-monitoring scenarios involve a host party that makes a declaration regarding its nuclear material or items and a monitoring party that verifies that declaration. A verification system developed for such a use needs to be trusted by both parties. The first concern, primarily from the host party's point of view, is that any sensitive information that is collected must be protected without interfering in the efficient operation of the facility being monitored. This concern is addressed in what can be termed a 'certification' process. The second concern, of particular interest to the monitoring party, is that it must be possible to confirm the veracity of both the measurement system and the data produced by this measurement system. The monitoring party addresses these issues during an 'authentication' process. Addressing either one of these concerns independently is relatively straightforward. However, it is more difficult to simultaneously satisfy host party certification concerns and monitoring party authentication concerns. Typically, both parties will want the final access to the measurement system. We will describe an alternative approach that allows both parties to gain confidence simultaneously. This approach starts with (1) joint development of the measurement system followed by (2) host certification of several copies of the system and (3) random selection by the inspecting party of one copy to be use during the monitoring visit and one (or more) copy(s) to be returned to the inspecting party's facilities for (4) further hardware authentication; any remaining copies are stored under joint seal for use as spares. Following this process, the parties will jointly (5) perform functional testing on the selected measurement system and then (6) use this system during the monitoring visit. Steps (1) and (2) assure the host party as to the certification of whichever system is eventually used in the monitoring visit

  2. Maximum-confidence discrimination among symmetric qudit states

    International Nuclear Information System (INIS)

    Jimenez, O.; Solis-Prosser, M. A.; Delgado, A.; Neves, L.

    2011-01-01

    We study the maximum-confidence (MC) measurement strategy for discriminating among nonorthogonal symmetric qudit states. Restricting to linearly dependent and equally likely pure states, we find the optimal positive operator valued measure (POVM) that maximizes our confidence in identifying each state in the set and minimizes the probability of obtaining inconclusive results. The physical realization of this POVM is completely determined and it is shown that after an inconclusive outcome, the input states may be mapped into a new set of equiprobable symmetric states, restricted, however, to a subspace of the original qudit Hilbert space. By applying the MC measurement again onto this new set, we can still gain some information about the input states, although with less confidence than before. This leads us to introduce the concept of sequential maximum-confidence (SMC) measurements, where the optimized MC strategy is iterated in as many stages as allowed by the input set, until no further information can be extracted from an inconclusive result. Within each stage of this measurement our confidence in identifying the input states is the highest possible, although it decreases from one stage to the next. In addition, the more stages we accomplish within the maximum allowed, the higher will be the probability of correct identification. We will discuss an explicit example of the optimal SMC measurement applied in the discrimination among four symmetric qutrit states and propose an optical network to implement it.

  3. User type certification for advanced flight control systems

    Science.gov (United States)

    Gilson, Richard D.; Abbott, David W.

    1994-01-01

    Advanced avionics through flight management systems (FMS) coupled with autopilots can now precisely control aircraft from takeoff to landing. Clearly, this has been the most important improvement in aircraft since the jet engine. Regardless of the eventual capabilities of this technology, it is doubtful that society will soon accept pilotless airliners with the same aplomb they accept driverless passenger trains. Flight crews are still needed to deal with inputing clearances, taxiing, in-flight rerouting, unexpected weather decisions, and emergencies; yet it is well known that the contribution of human errors far exceed those of current hardware or software systems. Thus human errors remain, and are even increasing in percentage as the largest contributor to total system error. Currently, the flight crew is regulated by a layered system of certification: by operation, e.g., airline transport pilot versus private pilot; by category, e.g., airplane versus helicopter; by class, e.g., single engine land versus multi-engine land; and by type (for larger aircraft and jet powered aircraft), e.g., Boeing 767 or Airbus A320. Nothing in the certification process now requires an in-depth proficiency with specific types of avionics systems despite their prominent role in aircraft control and guidance.

  4. Los Alamos Plutonium Facility newly generated TRU waste certification

    International Nuclear Information System (INIS)

    Gruetzmacher, K.; Montoya, A.; Sinkule, B.; Maez, M.

    1997-01-01

    This paper presents an overview of the activities being planned and implemented to certify newly generated contact handled transuranic (TRU) waste produced by Los Alamos National Laboratory's (LANL's) Plutonium Facility. Certifying waste at the point of generation is the most important cost and labor saving step in the WIPP certification process. The pedigree of a waste item is best known by the originator of the waste and frees a site from expensive characterization activities such as those associated with legacy waste. Through a cooperative agreement with LANLs Waste Management Facility and under the umbrella of LANLs WIPP-related certification and quality assurance documents, the Plutonium Facility will be certifying its own newly generated waste. Some of the challenges faced by the Plutonium Facility in preparing to certify TRU waste include the modification and addition of procedures to meet WIPP requirements, standardizing packaging for TRU waste, collecting processing documentation from operations which produce TRU waste, and developing ways to modify waste streams which are not certifiable in their present form

  5. Certification testing of the MOX Fresh Fuel Package (MFFP)

    International Nuclear Information System (INIS)

    Nichols, J.C. III; Yapuncich, F.L.

    2004-01-01

    Packaging Technology, Inc. (PacTec) is designing the MFFP as part of the Duke, COGEMA, Stone and Webster (DCS) consortium. DCS is tasked with providing the Department of Energy (DOE) with domestic MOX fuel fabrication and reactor irradiation services for the purpose of disposing of surplus weapons usable plutonium. This paper will discuss the development of the MFFP certification test program. The MFFP was subjected to a total of eleven free and puncture drops of the course of the certification testing. Because of the plutonium content, the design must be a Type BF, which among other things requires a containment boundary with a tested leakage rate of 1 x 10 -7 cm 3 /s air at 1 atm absolute and 25 C, or less. Both economics (desire for maximized payload) and operational (conveyance mode restricts size and weight) constraints lead to a highly optimized design. The optimized package design led to a significant test program which needed to address the containment boundary stability, puncture resistance of the package and lid end impact limiter, structural performance of the light weight lid structure, and stability of the internal structures. The test program efficiently balanced the test objectives while minimizing the number of costly hardware items used during this destructive testing. This balance achieved by strategic replacement of mock and prototypic payloads, impact limiters, and by careful test order considerations. The paper will conclude with a selected summary of the testing and an assessment of the test programs thoroughness

  6. Waste Receiving and Processing Module 2A waste certification strategy

    International Nuclear Information System (INIS)

    LeClair, M.D.; Pottmeyer, J.A.; Hyre, R.A.

    1994-01-01

    This document addresses the certification of Mixed Low Level Waste (MLLW) that will be treated in the Waste Receiving and Processing Facility Module 2A (WRAP 2A) and is destined for disposal in the MLLW trench of the Low Level Burial Grounds (LLBG). The MLLW that will be treated in WRAP 2A contains land disposal restricted and radioactive constituents. Certification of the treated waste is dependent on numerous waste management activities conducted throughout the WRAP 2A operation. These activities range from waste treatability testing conducted prior to WRAP 2A waste acceptance to overchecking final waste form quality prior to transferring waste to disposal. This document addresses the high level strategies and methodologies for certifying the final waste form. Integration among all design and verification activities that support final waste form quality assurance is also discussed. The information generated from this effort may directly support other ongoing activities including the WRAP 2A Waste Characterization Study, WRAP 2A Waste Analysis Plan development, Sample Plan development, and the WRAP 2A Data Management System functional requirements definition

  7. 75 FR 28335 - Testing and Labeling Pertaining to Product Certification

    Science.gov (United States)

    2010-05-20

    ... Product Certification; Proposed Rule #0;#0;Federal Register / Vol. 75, No. 97 / Thursday, May 20, 2010.... CPSC-2010-0038] RIN 3041-AC71 Testing and Labeling Pertaining to Product Certification AGENCY: Consumer... also address labeling of consumer products to show that the product complies with certification...

  8. 75 FR 48933 - 2010 Russian Export Certification for Fishery Products

    Science.gov (United States)

    2010-08-12

    ... Export Certification for Fishery Products AGENCY: Seafood Inspection Program (SIP), National Marine... certification of seafood products exported from the United States to the Russian Federation. The purpose of the... regarding certification of the safety and sanitary condition of fish and fishery products for export to the...

  9. Certification. Tool for quality? Market and client for radiation experts

    International Nuclear Information System (INIS)

    Zwaard, W.

    1999-01-01

    The role and impact of certification in the advisory work of radiation experts is briefly outlined. Certification is a guarantee for quality of the advice or a product in case there is a client and a market. In cases where there is not a client or a market certification will lead to 'window-dressing and a bureaucratic system

  10. 76 FR 69481 - Testing and Labeling Pertaining to Product Certification

    Science.gov (United States)

    2011-11-08

    ... 1107 Testing and Labeling Pertaining to Product Certification; Final Rule #0;#0;Federal Register / Vol... Pertaining to Product Certification AGENCY: Consumer Product Safety Commission. ACTION: Final rule. SUMMARY... that the product complies with the certification requirements under section 14(a) of the Consumer...

  11. 14 CFR 21.273 - Airworthiness certificates other than experimental.

    Science.gov (United States)

    2010-01-01

    ... TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Delegation Option Authorization... airworthiness certificate for aircraft manufactured under a delegation option authorization if he finds, on the... authorize any employee to sign airworthiness certificates if that employee— (1) Performs, or is in direct...

  12. 45 CFR 170.410 - Types of testing and certification.

    Science.gov (United States)

    2010-10-01

    ... Section 170.410 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.410 Types...

  13. 45 CFR 170.450 - EHR module testing and certification.

    Science.gov (United States)

    2010-10-01

    ... Section 170.450 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.450 EHR...

  14. 47 CFR 2.1043 - Changes in certificated equipment.

    Science.gov (United States)

    2010-10-01

    ... certificated or formerly type accepted AM broadcast stereophonic exciter-generator with a certificated or... interconnection of a multiplexing exciter with a certificated or formerly type accepted AM broadcast transmitter... generators to a type accepted FM broadcast transmitter, provided the transmitter exciter is designed for...

  15. Status of the safety certification process of the TRANSRAPID system

    Energy Technology Data Exchange (ETDEWEB)

    Blomerius, J [TUEV Rheinland, Koeln (Germany). Inst. fuer Software, Elektronik, Bahntechnik

    1996-12-31

    Since 20 years TUeV Rheinland is involved in safety certification of maglev technology of the TRANSRAPID type. The process applied is called PASC (Programm Accompanying Safety Certification). The paper reports on safety assessment of relevant subsystems and components (TR07, OCS, guideway components) as well as safety certification in the final program. (HW)

  16. 20 CFR 656.24 - Labor certification determinations.

    Science.gov (United States)

    2010-04-01

    ... certification applications. (2) If the labor certification presents a special or unique problem, the Director of... opportunity as a college or university teacher, the U.S. worker must be at least as qualified as the alien. (3... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Labor certification determinations. 656.24...

  17. 14 CFR 121.437 - Pilot qualification: Certificates required.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Pilot qualification: Certificates required... Pilot qualification: Certificates required. (a) No pilot may act as pilot in command of an aircraft (or... pilots) unless he holds an airline transport pilot certificate and an appropriate type rating for that...

  18. 29 CFR 102.115 - Certification of papers and documents.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 2 2010-07-01 2010-07-01 false Certification of papers and documents. 102.115 Section 102... Certification and Signature of Documents § 102.115 Certification of papers and documents. The executive... Board in his place and stead shall certify copies of all papers and documents which are a part of any of...

  19. 7 CFR 946.60 - Inspection and certification.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Inspection and certification. 946.60 Section 946.60... WASHINGTON Order Regulating Handling Inspection and Certification § 946.60 Inspection and certification. (a... this subpart, each handler who first ships potatoes shall, prior to making shipment, cause each...

  20. 46 CFR 176.910 - Passenger Ship Safety Certificate.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Passenger Ship Safety Certificate. 176.910 Section 176... 100 GROSS TONS) INSPECTION AND CERTIFICATION International Convention for Safety of Life at Sea, 1974, as Amended (SOLAS) § 176.910 Passenger Ship Safety Certificate. (a) A vessel, which carries more than...