WorldWideScience

Sample records for materials relatorio anual

  1. Annual report 1996; Relatorio anual 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The most important achievements that took place in 1996, year of the fortieth anniversary`s celebration of IPEN, summarized in this report, will demonstrate the vitality and the excellency reached by the Institute, on this period. Tough-out this forty years, the most encouraging points is the conviction to have preserved all the guidelines of the Institutional Founders, searching to be the best, to reach better standards, to become a new reference, being aware of the world changes and accepting the challenge of it. With this reality in mind, we will be assertive in prognosticate and to accomplish strategic, economic and social values for the IPEN`s future. Many achievements such as: the increasing of the quality radiopharmaceuticals production, in order to permit a milion of medical procedures for the diagnostic and therapy for many illness; the maintenance of the concept A (attributed by CAPES - Coordenadoria de Aperfeicoamento de Pessoal de Nivel Superior) for the Postgraduate Course of IPEN, in association with the University of Sao Paulo; among the 300 students, forty of them took their MSc or PhD title, on this period; the Particulated Materials Processing Center that will enable the Materials Area to perform high quality works in association with private and public organizations; the most important undertaking project at IPEN this year is the modernization of the Nuclear Research Reactor - IEA-R1, that will allow the continuous operation in 5MW; the ongoing foundation on IPEN`s campus, of the Technological Enterprises Incubation Center - CITEC, an initiative of this Institute in association with IPT (Instituto de Pesquisas Tecnologicas), USP, Universidade de Sao Paulo, with the support of SEBRAE-SP (Servico de Apoio as Micro e Pequenas Empresas de Sao Paulo), SCTDE (Secretaria da Ciencia, Tecnologia e Desenvolvimento Economico) and CNEN (Comissao Nacional de Energia Nuclear), will provide a link between the know-how producers and the market. For these above

  2. Annual report 1996; Relatorio anual 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The most important achievements that took place in 1996, year of the fortieth anniversary`s celebration of IPEN, summarized in this report, will demonstrate the vitality and the excellency reached by the Institute, on this period. Tough-out this forty years, the most encouraging points is the conviction to have preserved all the guidelines of the Institutional Founders, searching to be the best, to reach better standards, to become a new reference, being aware of the world changes and accepting the challenge of it. With this reality in mind, we will be assertive in prognosticate and to accomplish strategic, economic and social values for the IPEN`s future. Many achievements such as: the increasing of the quality radiopharmaceuticals production, in order to permit a milion of medical procedures for the diagnostic and therapy for many illness; the maintenance of the concept A (attributed by CAPES - Coordenadoria de Aperfeicoamento de Pessoal de Nivel Superior) for the Postgraduate Course of IPEN, in association with the University of Sao Paulo; among the 300 students, forty of them took their MSc or PhD title, on this period; the Particulated Materials Processing Center that will enable the Materials Area to perform high quality works in association with private and public organizations; the most important undertaking project at IPEN this year is the modernization of the Nuclear Research Reactor - IEA-R1, that will allow the continuous operation in 5MW; the ongoing foundation on IPEN`s campus, of the Technological Enterprises Incubation Center - CITEC, an initiative of this Institute in association with IPT (Instituto de Pesquisas Tecnologicas), USP, Universidade de Sao Paulo, with the support of SEBRAE-SP (Servico de Apoio as Micro e Pequenas Empresas de Sao Paulo), SCTDE (Secretaria da Ciencia, Tecnologia e Desenvolvimento Economico) and CNEN (Comissao Nacional de Energia Nuclear), will provide a link between the know-how producers and the market. For these above

  3. Annual report of the Brazilian Directory of R and D - 1995; Relatorio anual da Diretoria de P e D 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The Directory of Research and Development of the Brazilian CNEN (National Nuclear Energy Commission) presents the report for 1995. The publication describes and cover activities carried out in the following areas: nuclear reactors, nuclear fuel cycle, control and instrumentation, application of nuclear techniques, radioisotope production, materials of nuclear interest, radioactive wastes and irradiated materials. Three institutes accomplish Directory`s Programme: Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/MG); Instituto de Engenharia Nuclear (IEN/RJ); and Instituto de Pesquisas Energeticas e Nucleares (IPEN/SP). It is important to mention that the Institutes carry out a numberless of activities in cooperation with others institutions such as: universities, industries, private and government organizations. This cooperation is administrated through research contracts and agreements. 28 figs., 11 tabs.

  4. Annual report - ENERSUL - 1999; Relatorio anual - ENERSUL - 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The annual report of ENERSUL - Brazilian electric power distribution company - introduces the following main topics: Outlook for the State of Mato Grosso do Sul; strategic focus; financial performance; relation with investors; energy sold; capacity increases; customers; customers; energy balance; performance and quality; electric system; investments; people; human resources; synergies; awards; workplace safety; social balance; and patrimonial balance.

  5. Annual report 2008: ELETROBRAS; Relatorio anual 2008: ELETROBRAS

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    This document reports the actives of the ELETROBRAS during the year 2008 related to: electricity market, international activities, strategic planning, financial indicators, business analysis, relationship with investors, energy marketing, operational research, technological development, financial statements, social responsibility and environment

  6. ELETRONUCLEAR - Annual report - 1997; ELETRONUCLEAR - Relatorio anual - 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The annual activities report of 1997 of ELETRONUCLEAR - Brazilian company responsible by the electric power generation from the nuclear technology - introduces the next main topics: company vision and mission; energy production and commercialization; investments in the electric power generation; economic and financial situation; social balancing; and patrimonial balancing.

  7. Annual report - ESCELSA - 1999; Relatorio anual - ESCELSA - 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The annual report of 1999 of ESCELSA - Brazilian electric power company - introduces the next main topics: state of Espirito Santo; strategic focus; financial performance; relation with investors; energy sales; customers; quality; electric system; investments; people; resources; synergies; awards; outlook; social balancing; and patrimonial balancing.

  8. Boletina Anual

    OpenAIRE

    2011-01-01

    Con esta Boletina impresa iniciamos una serie anual de publicaciones de opinión de la Escuela de Estudios de Género cuyo objetivo es generar reflexiones alrededor de artículos cortos, escritos en un lenguaje sencillo y accesible a todo tipo de público, que intenten dar cuenta de las discusiones tanto políticas como teóricas que suscita un evento relevante de cada año para las mujeres o los grupos sexuales minorizados. En este espacio se pretende reunir opiniones diversas sobre un tema de actu...

  9. Annual report 2013 - ABACC - Brazilian-Argentina agency for accounting and control of nuclear materials; Relatorio anual 2013 - ABACC - Agencia Brasileiro-Argentina de Contabilidade e Controle de Materiais Nucleares

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-07-01

    The document reports the activities of the commission and all technical activities. Shows the presence of ABACC at events; the strengthening technical capability; technical cooperation, institutional and administrative and financial activities; an outlook for 2014. Gives a list of the ABACC inspectors and presents the facilities under the Quadripartite Agreement.

  10. Annual report and accounting statements 2007: ELETROBRAS; Relatorio anual e demonstracoes contabeis 2007: ELETROBRAS

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    This document reports the actives of the ELETROBRAS during the year 2007 related to: electricity market, international activities, strategic planning, financial indicators, business analysis, relationship with investors, energy marketing, operational research, technological development, financial statements, social responsibility and environment

  11. Activities report of Instituto de Pesquisas Energeticas e Nucleares -IPEN - 1993; Relatorio anual de atividades 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-08-01

    This is an activity report of 1993 year from Instituto de Pesquisas Energeticas Nucleares - IPEN, one brazilian organization that form personnel actuate in radioprotection at the man and environment. Their works in social and environmental applications of nuclear energy, developing of reactors, alternative technologies to energy generation, advanced technologies and infra-structure activities are presented. (C.M.).

  12. Annual activities report of Brazilian Aerospace Technical Center -CTA/IEAv - 1989; Relatorio anual de atividades - CTA/IEAv - 1989

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-12-31

    This document reports the research activities on nuclear physics and reactors physics and engineering in the Brazilian Aerospace Technical Center/Advanced Studies Institute, Sao Paulo State, in the year of 1989.

  13. Annual report - Industrias Nucleares do Brasil S A - 1998; Relatorio anual - Industrias Nucleares do Brasil S A - 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    The annual report of 1998 of Industrias Nucleares do Brasil S A - Brazilian company responsible for the industrial activities of the nuclear fuel cycle - introduces the next main topics: mineral resource directory main actions; industrial directory main actions; finance and administration directory main actions; transparency; environment, safety and quality; the company; and financial statements.

  14. Annual report 1999 - Brazil Nuclear Industry (INB); Relatorio anual 1999 - Industrias Nucleares do Brasil S.A

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    This document presents the 1999 annual report covering the following activities: nuclear fuel, resources and application, ISO 9001, environment social activities, personnel, financial indicators, and countability.

  15. Annual activities report of Brazilian Aerospace Technical Center -CTA/IEAv - 1989; Relatorio anual de atividades - CTA/IEAv - 1989

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-12-31

    This document reports the research activities on nuclear physics and reactors physics and engineering in the Brazilian Aerospace Technical Center/Advanced Studies Institute, Sao Paulo State, in the year of 1989.

  16. Activities report - 1995; Relatorio de atividades - 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    The annual report of the Brazilian Institute of Nuclear Engineering (IEN) for 1995 is presented. IEN carries out research and services in the following areas: nuclear reactor engineering and safety, nuclear reactor instrumentation and control, radioisotope production, nuclear physics; chemical analysis and processes, materials technology and radioprotection. 7 figs., 8 tabs.

  17. Relatorio do Censo Brasileiro de Dialise Cronica 2012

    Directory of Open Access Journals (Sweden)

    Ricardo Cintra Sesso

    2014-03-01

    Full Text Available Introdução: Dados nacionais sobre diálise crônica são fundamentais para o conhecimento e planejamento do tratamento. Objetivo: Apresentar dados do censo da Sociedade Brasileira de Nefrologia sobre os pacientes com doença renal crônica em diálise em julho de 2012. Métodos: Levantamento de dados de unidades de diálise de todo o país. A coleta de dados foi feita utilizando questionário preenchido on-line pelas unidades de diálise do Brasil. Resultados: 255 (39,1% unidades responderam ao censo. Em julho de 2012, o número total estimado de pacientes em diálise no país foi de 97.586. As estimativas nacionais das taxas de prevalência e de incidência de doença renal crônica em tratamento dialítico foram de 503 e 177 pacientes por milhão da população, respectivamente. O número de pacientes que iniciaram tratamento em 2012 foi 34.366. A taxa anual de mortalidade bruta foi de 18,8%. Dos pacientes prevalentes, 31,9% tinham idade ≥ 65 anos, 91,6% estavam em hemodiálise e 8,4% em diálise peritoneal, 30.447 (31,2% estavam em fila de espera para transplante, 28,5% tinham diabetes, 36,6% tinham fósforo sérico > 5,5 mg/dl e 34,4% hemoglobina < 11 g/dl. Cateter venoso era usado como acesso em 14,5% dos pacientes em hemodiálise. Conclusão: As taxas de prevalência e incidência de pacientes em diálise aumentaram, e a taxa de mortalidade tendeu a diminuir em relação a 2011. Os dados de indicadores da qualidade da diálise de manutenção encontram-se estáveis com tendência à queda nos níveis de anemia; e mostram a relevância do censo anual para o planejamento da assistência dialítica.

  18. Annual report 2006 - CPFL Energy - Light and Power Company from Sao Paulo, SP; Relatorio anual 2006 - CPFL Energia - Companhia Paulista de Forca e Luz

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This document reports the activities during 2006 of the Sao Paulo Light and Power (CPFL) as follows: society evolution, corporative and ethic management; economic and financial performance; operational performance, sustainability management and corporative responsibility.

  19. Annual Report 2000; Informe Anual 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The Annual Report 2000 of the Technological Research Direction at the National Institute of Nuclear Research (ININ) of Mexico presents its activities during year 2000. It is described a work plan and budget for the exercise in 2001. The projects, services and work programs of those different management offices adscripted to this Direction were revised and evaluated. The Technological Innovation Management office is formed by two departments, the one of Control and the one Evaluation and Linking. The projects which form the Management office comprise: Neutron activation analysis, Environmental radiation surveillance, gamma spectroscopy, archaeometry, nuclear application studies and support to priority projects. The Radiological Safety management office provides internal and external services in matter of radiation protection and radioactive waste negotiation to fulfil with the applicable standardization. This management office realizes the link function with the National Commission of Nuclear Safety and Safeguards (CNSNS) as for the licenses, authorizations and permissions for nuclear and radioactive facilities and for those activities which are involucrated with the use of radioactive material and devices generators of ionizing radiation in the National Institute of Nuclear Research. The Nuclear Technology management office is composed of two departments: Chemical Analysis wherever analytical studies are realized to fulfil with national standards and international codes to providing services at different enterprises and the Reactor wherever an aging negotiation program is established for him (thirty operation years) which allows to mitigate or to correct those effects by aging in facilities. The Health Nuclear applications management office consists of two departments: Metrology which obtains the authorization from the Commerce and Industrial Fomentation Secretary (SECOFI) of the national standards of beta particles, neutrons and coincidences, as well as the

  20. 1999 Annual Report; 1999 Informe Anual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    This annual report presents information on the main activities carried out by the Nuclear Regulatory Authority (ARN) of Argentina during 1999, on radiation protection and nuclear safety. The work is developed in 9 chapters, 1 summary and 2 appendixes, where a description of the following activities and the bases of the Argentina Regulatory Systems are given: 1. Evolution of the nuclear regulatory activities in Argentina. Organic structures, tasks and budget. 2. Regulatory system, laws, transport of radioactive materials, safety at the management of radioactive wastes, regulatory documents issued. 3. Institutional relations with national and international organizations. 4. Inspection and evaluations of nuclear installations. Safeguards and physical protection. 5. Occupational and environmental surveillance. 6. Radiological emergencies. 7. Scientific and technological activities. Nuclear Regulatory Authority's laboratories. 8. Training, technical information and software development. 9. Radioactive facilities inspections.

  1. 1998 Annual report; 1998 Informe anual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    This annual report presents information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 1998. The activities are developed in 11 chapters and 2 appendixes, where are describing the activities and the bases of the Argentine Regulatory System. The following chapters and the appendixes are: 1.-Evolution of the nuclear regulatory activities in the Argentina. 2.-Regulatory system, laws, transport of radioactive materials, safety at the management of radioactive wastes, regulatory documents issued. 3.-Institutional relations with national and international organizations. 4.-Inspections and evaluations of the radiological and nuclear safety. 5.-Inspections and evaluations of safeguards and physical protection. 6.-Occupational surveillance. 7.-Environmental surveillance. 8.-Radiological emergencies. 9.-Scientific and technological activities. 10.-Training and technical information. 11.-Human and economic resources. Appendix 1.-Documents and regulatory licensings. Appendix 2.-Inspections to radioactive facilities.

  2. Seguimiento de objetivos fiscales anuales:una aplicación con datos regionales

    Directory of Open Access Journals (Sweden)

    Teresa Leal

    2005-11-01

    Full Text Available En este artículo evaluamos el grado de ajuste a los objetivos presupuestarios establecidos de un conjunto de datos de recaudación tributaria de la Comunidad Autónoma de Andalucía. Usamos la metodología de Kanda (2002, que permite evaluar la probabilidad de alcanzar el objetivo anual prefijado cuando se dispone de información mensual de una parte del año.Los perfiles mensuales estudiados se ajustaron a una senda compatible con el objetivo anual en casi todos los casos estudiados. Además se aprecia una tendencia en los Impuestos directos y Tasas,precios públicos y otros ingresos a mostrar un sesgo a la baja respecto al objetivo anual, mientras que el capítulo de Impuestos indirectos tiende a presentar errores positivos respecto al objetivo anual.

  3. Annual report 2005[International Atomic Energy Agency]; Informe anual 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The Annual Report reviews the results of the Agency's programme according to the three 'pillars' of technology, safety and verification. The main part of the report, starting on page 13, generally follows the programme structure as it applied in 2005. The introductory chapter, 'The Year in Review', seeks to provide a thematic analysis, based on the three pillars, of the Agency's activities within the overall context of notable developments during the year. Information on specific issues can be found in the latest editions of the Agency's Nuclear Safety Review, Nuclear Technology Review and Technical Cooperation Report. For the convenience of readers, these documents are available on the CD-ROM attached to the inside back cover of this report. Additional information covering various aspects of the Agency's programme is also provided on the attached CD-ROM, and is also available on the Agency?s iaea.org web site (http://www.iaea.org/Worldatom/Documents/Anrep/Anrep2005/). All sums of money are expressed in United States dollars. The designations employed and the presentation of material in this document do not imply the expression of any opinion whatsoever on the part of the Secretariat concerning the legal status of any country or territory or of its authorities, or concerning the delimitation of its frontiers. The topics covered in the chapter related to Technology are: Nuclear Power; Nuclear Fuel Cycle and Materials Technologies; Capacity Building and Nuclear Knowledge Maintenance for Sustainable Energy Development; Nuclear Science; Food and Agriculture; Human Health; Water Resources; Protection of the Marine and Terrestrial Environment; Physical and Chemical Applications. Topics related to Safety and Security discussed in this report are: Safety of Nuclear Installations; Radiation and Transport Safety; Management of Radioactive Waste; Nuclear Security. Topics related to Verification are Safeguards and Verification in Iraq Pursuant to UNSC Resolutions. A separate

  4. Avances en la evaluación de leguminosas anuales distintas del T. subterraneum L.

    OpenAIRE

    Moreno Cruz, V.; Gallardo Martínez, D.

    2011-01-01

    Dado los problemas actuales de persistencia del T. subterraneum en muchas áreas, debidas en general, al estrecho margen de adaptacóin de las variedades disponibles actualmente, se indican en el presente trabajo otras especies de leguminosas anuales que pueden ser una alternativa, en los pastos del S-O, al referido Trifolium subterraneum. Se incluye, entre las evaluaciones realizadas, las especies Medicago polymorpha, Trifolium glomeratum y Ornithopus compressus, todas ellas presentes en los s...

  5. Efecto Impositivo y Tributario de la Reforma Contable. Especial Referencia a las Cuentas Anuales Consolidadas

    OpenAIRE

    Enrique Corona Romero

    2004-01-01

    El modelo contable español será un modelo dual como consecuencia de la aplicación de las normas internacionales de contabilidad adoptadas por la Unión Europea a ciertas cuentas anuales consolidadas. No obstante, el método del afecto impositivo de la NIC 12 es muy similar al regulado por las normas españolas, sin perjuicio de la necesidad de complementar éstas con una serie de precisiones y reglas adicionales en materia valorativa y de representación. El proceso de consolidación y las magnitud...

  6. Muhlenbergia monandra (Poaceae: Eragrostideae, nueva especie anual endémica del Perú

    Directory of Open Access Journals (Sweden)

    J. José Alegría Olivera

    2001-01-01

    Full Text Available Se describe e ilustra Muhlenbergia monandra, endémica de Perú. La nueva especie se caracteriza por sus glumas mayores que el antecio, por tener inflorescencias espiciformes y las flores cleistógamas con un estambre. La anatomía foliar se describe e ilustra y se detallan sus caracteres diferenciales. Se incluyen observaciones sobre la epidermis de la lemma y las glumas realizadas con el Microscopio Electrónico de Barrido. Se discute la posición taxonómica de la nueva entidad y las diferencias con las especies anuales relacionadas que habitan en América del Sur

  7. Efecto Impositivo y Tributario de la Reforma Contable. Especial Referencia a las Cuentas Anuales Consolidadas

    Directory of Open Access Journals (Sweden)

    Enrique Corona Romero

    2004-01-01

    Full Text Available El modelo contable español será un modelo dual como consecuencia de la aplicación de las normas internacionales de contabilidad adoptadas por la Unión Europea a ciertas cuentas anuales consolidadas. No obstante, el método del afecto impositivo de la NIC 12 es muy similar al regulado por las normas españolas, sin perjuicio de la necesidad de complementar éstas con una serie de precisiones y reglas adicionales en materia valorativa y de representación. El proceso de consolidación y las magnitudes consolidadas pueden modificarse (en determinadas cuentas consolidadas como consecuencia de la aplicación del indicado modelo dual. La modificación de las normas contables aplicables a las cuentas anuales individuales, utilizando el valor razonable y una nueva determinación de ingresos y gastos, puede tener incidencia tributaria, alterando el gravamen por Impuesto sobre Sociedades, salvo que se introduzcan nuevas normas fiscales que "compensen" los efectos que se producen en el vigente modelo de fijación de la base imponible. Las novedades que se introduzcan en las normas aplicables a las cuentas anuales consolidadas tendrían, en principio, un efecto tributario limitado. Palabras clave: método del efecto impositivo, normas internacionales de contabilidad, cuentas anuales consolidadas, Impuesto sobre Sociedades, diferencias temporales, diferencias temporarias, base fiscal. The Spanish accounting model will be dual as a result of the application to certain consolidated annual accounts of international accounting standards adopted by the European Union. However, the procedure for determining tax liability set forth in the IAS 12 is very similar to that regulated by Spanish standards, although these must be complemented by a series of specific provisions and additional rules on assessment and representation matters. The consolidation process and the consolidated amounts may be amended (for certain consolidated accounts as a result of the

  8. Preparación anual para baloncesto (Traducción

    Directory of Open Access Journals (Sweden)

    Gammal Abdel Zambrano

    2015-06-01

    Full Text Available El presente artículo es ana colaboración del Licenciado Zambrano. Fue elaborado ronzo trabajo de clase durante su formación en traducción, pero tanto por la calidad como por el contenido se ha considerado de interés para la comunidad de educadores físicos. Debe aclararse que ha sido condensado por razones de espacio. La preparación anual específicamente diseñada para baloncesto alcanzó un nivel alto de sofisticación durante las décadas pasadas. Cada día surgen indicios que demuestran que este programa puede contribuir al mejoramiento del rendimiento y a reducir el potencial de lesión. Entre los principales componentes de preparación para este deporte se puede destacar la potencia anaeróbica (etapas I y II, potencia aeróbica, fuerza y potencia muscular, resistencia y por último la flexibilidad. El concepto de preparación anual emplea los principios de periodización sobre el trabajo y descanso necesarios para alcanzar un máximo desempeño y evitar lesiones. Aún así, existen algunos problemas particulares asociados a los varios niveles de competición que requieren monitoreo continuo por parte del entrenador con miras a maximizar la condición física y evitar el sobreentrenamiento.

  9. Incremento anual do Pau-rosa (Aniba duckei Kostermans) Lauraceae, em floresta tropical úmida primária. ()

    OpenAIRE

    Alencar, Jurandyr da Cruz; Araujo, Vivaldo Campbell de

    1981-01-01

    Resumo Os autores analisam o incremento periódico anual do diâmetro (D.A.P.) de vinte árvores de "Pau-rosa" (Aniba duckei Kostermans) durante o período de 12,5 anos em floresta tropical primária na Reserva Ducke, na Amazônia Central. O incremento periódico anual variou de 0,16 cm a 0.74 cm/ano sendo a média 0.38 cm/ano. O incremento periódico médio, para as árvores tomadas em conjunto, cresce a partir de janeiro, época de chuvas, atinge o máximo em julho e decresce durante a estação seca. Tes...

  10. Efecto de cihalofop-butilo en el control de malezas gramíneas anuales en arroz de temporal

    Directory of Open Access Journals (Sweden)

    Valent\\u00EDn A. Esqueda

    2004-01-01

    Full Text Available Efecto de cihalofop-butilo para el control de malezas gramíneas anuales en arroz de temporal. Con objeto de evaluar la efectividad del herbicida cihalofop-butilo en el control de malezas gramíneas anuales en el arroz de temporal cv Milagro Filipino, durante 2002, se condujeron dos experimentos en el municipio de Tres Valles, Ver., México. En ambos experimentos se utilizó el diseño experimental de bloques al azar con siete tratamientos y cuatro repeticiones: cihalofop-butilo a 180, 225, 270, 315 y 360 g/ha, propanil a 4.320 g/ha y un testigo sin aplicar. Los tratamientos se aplicaron cuando el arroz tenía una altura de aproximadamente 25 cm. Las malezas gram íneas presentes fueron el zacate de agua y el zacate frente de toro [Digitaria ciliaris (Retz. Koeler]. El control de malezas gramíneas anuales y la toxicidad del herbicida al arroz se evaluaron a los 15, 30 y 45 días después de la aplicación. Los mejores controles de los zacates de agua y frente de toro se obtuvieron cuando cihalofop-butilo se aplicó a 315 y 360 g/ha. Las diferentes dosis de este herbicida, no ocasionaron toxicidad al arroz. El efecto en el control de las malezas gramíneas por el propanil fue similar al de cihalofop-butilo en dosis de 360 g/ha durante los primeros 15 días después de su aplicación.

  11. ANÁLISE ESPACIAL DA TEMPERATURA E DA PRECIPITAÇÃO MEDIA ANUAL NO ESTADO DE SÃO PAULO / SPATIAL ANALYSIS OF MEAN ANNUAL TEMPERATURE AND RAINFALL FOR THE SÃO PAULO STATE

    Directory of Open Access Journals (Sweden)

    SIDNEY R. VIEIRA

    2009-11-01

    Full Text Available O objetivo deste trabalho foi analisar a variabilidade espacial da temperatura e da precipitação média anual no Estado de São Paulo. Foram utilizados dados de 416 estações climatológicas, referente ao período de 1936 a 1992 e analisados dois parâmetros climatológicos (temperatura média anual e precipitação pluvial média anual. Os dados foram analisados por meio da estatística descritiva e dageoestatística, para posterior construção de mapas de variabilidade espacial. Os resultados evidenciam que a altitude (m e a temperatura média anual (ºC apresentaram baixos valores de efeito pepita enquanto que a precipitação pluvial média anual (mm apresentou um maior pra esseparâmetro. A temperatura média anual (ºC e a precipitação pluvial média anual (mm apresentaram periodicidade detectada por meio do semivariograma experimental. Os mapas de distribuição espacial evidenciam a influencia da altitude sobre os valores estimados por krigagem para temperatura médiaanual (ºC e precipitação pluvial média anual (mm.

  12. Annual Report 1995. Direccion de Servicios Tecnologicos; Informe Anual 1995. Direccion de Servicios Tecnologicos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The main results for projects, academic studies, services and departmental activities belonging to the Direccion de Servicios Tecnologicos of the Instituto Nacional de Investigaciones Nucleares (ININ), during 1995 are shown. It includes results in the different areas of Design, Promotion and Diffusion, Information Center, Professional development, Electronic Engineering, Information Department, Radiological security, Radioactive wastes, Ionizing radiation measurement, Radioactive materials, Chemical analysis and Technical assistance to the nuclear electrical central station of Laguna Verde. Among its activities, it includes information concerning the infrastructure, budgetary expenses and publications. (Author).

  13. Ciclo anual de la clorofila-α satelital en el archipiélago de Juan Fernández (33°S, Chile

    Directory of Open Access Journals (Sweden)

    Isabel Andrade

    2012-09-01

    Full Text Available La variabilidad espacial y temporal del ciclo anual de la clorofila-α en el archipiélago de Juan Fernández se analiza usando ocho anos de datos satelitales de clorofila-α, viento, corrientes y nivel del mar. Este archipiélago está conformado por tres islas: Robinson Crusoe-Santa Clara (RC-SC y Alejandro Selkirk (AS. Las islas RC-SC se encuentran en una región de alta energía cinética y mayores concentraciones de clorofila-α definida como Zona de Transición Costera, en cambio la isla AS se encuentra en una región de baja energía cinética y menores concentraciones de clorofila-α denominada Zona Oceánica. RC-SC posee un incremento de las concentraciones de clorofila-a en el lado suroeste, mientras que AS posee sus mayores concentraciones en el lado oeste, indicando la presencia de procesos forzantes diferentes. En ambas islas el ciclo anual de la clorofila es significativo y comienza a incrementar en abril, alcanzando valores relativamente altos entre junio y noviembre, disminuyendo hacia diciembre, hasta alcanzar un mínimo hacia fines de marzo. Este ciclo anual aparece desacoplado con el viento y acoplado con la energía cinética. Incrementos invernales de clorofila-a aparecen vinculados con remolinos de mesoescala provenientes de la zona continental, mientras que incrementos primaverales se podrían asociar a procesos locales vinculados al "efecto masa de isla". En ambas islas existen incrementos significativos de la clorofila-a en la banda anual y cuasi-bianual, pero sólo en AS se encontró una fluctuación significativa en la banda interanual vinculada con el Nino y la Oscilación del Sur.

  14. International Atomic Energy Agency Annual Report 2009; Informe Anual para 2009

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    The Annual Report 2009 aims to summarize only the significant activities of the Agency during the year in question. The main part of the report generally follows the programme structure as given in The Agency's Programme and Budget 2008-2009 (GC(51)/2). The introductory chapter, '2009 in Perspective', seeks to provide a thematic analysis of the Agency's activities within the context of notable developments during the year. More detailed information can be found in the latest editions of the Agency's Nuclear Safety Review, Nuclear Technology Review, Technical Cooperation Report and the Safeguards Statement for 2009 and Background to the Safeguards Statement. For the convenience of readers, these documents are available on the CD-ROM attached to the inside back cover of this report. Additional infomation covering various aspects of the Agency's programme is provided on the attached CD-ROM, and is also available on the Agency's web site at http://www.iaea.org/Publications/Reports/Anrep2009/index.html. Except where indicated, all sums of money are expressed in United States dollars. The designations employed and the presentation of material in this document do not imply the expression of any opinion whatsoever on the part of the Secretariat concerning the legal status of any country or territory or of its authorities, or concerning the delimitation of its frontiers. The mention of names of specific companies or products (whether or not indicated as registered) does not imply any intention to infringe proprietary rights, nor should it be construed as an endorsement or recommendation on the part of the Agency. The term 'non-nuclear-weapon State' is used as in the Final Document of the 1968 Conference of Non-Nuclear-Weapon States (United Natinos document A/7277) and in the Treaty on the Non-Proliferation of Nuclear Weapons (NPT). The term 'nuclear weapon State' is as used in the NPT

  15. International Atomic Energy Agency Annual Report 2010 [Spanish Version]; Informe Anual del OIEA para 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The Annual Report 2010 aims to summarize only the significant activities of the Agency during the year in question The main part of the report, starting on page 17, generally follows the programme structure as given in The Agency's Programme and Budget 2010-2011 (GC(53)/5). The introductory chapter, 'Overview', seeks to provide a thematic analysis of the Agency's activities within the context of notable developments during the year More detailed information can be found in the latest editions of the Agency's Nuclear Safety Review, Nuclear Technology Review, Technical Cooperation Report and the Safeguards Statement and Background to the Safeguards Statement and Summary. For the convenience of readers, these documents are available on the CD-ROM attached to the inside back cover of this report. Additional information covering various aspects of the Agency's programme is provided on the attached CD-ROM and is also available on the Agency's web site at http://www.iaea.org./Publications/ Reports/index.html. Except where indicated, all sums of money are expressed in United States dollars. The designations employed and the presentation of material in this report do not imply the expression of any opinion whatsoever on the part of the Secretariat concerning the legal status of any country or territory or of its authorities, or concerning the delimitation of its frontiers. The mention of names of specific companies or products (whether or not indicated as registered) does not imply any intention to infringe proprietary rights, nor should it be construed as an endorsement or recommendation on the part of the Agency. The term 'non-nuclear-weapon State' is used as in the Final Document of the 1968 Conference of Non-Nuclear-Weapon States (United Nations document A/7277) and in the Treaty on the Non-Proliferation of Nuclear Weapons (NPT) The term 'nuclear weapon State' is as used in the NPT.

  16. Información de los recursos intangibles ocultos: ¿memorias de sostenibilidad o informe anual?

    Directory of Open Access Journals (Sweden)

    Francisca Tejedo Romero

    2016-05-01

    Full Text Available Los recursos de naturaleza intangible se han convertido en los principales generadores de valor de manera sostenible en las empresas. En concreto, aquellos que permanecen ocultos en los balances debido a las dificultades que plantea su reconocimiento y medición (es decir, lo que se denomina capital intelectual. Si bien, el suministro por parte de las empresas de información voluntaria sobre estos recursos puede ayudar a reducir las posibles asimetrías de información y mejorar la transparencia informativa entre sus grupos de interés (stakeholders. En este sentido, los informes anuales son los principales medios de divulgación que tienen las empresas para suministrar información voluntaria. Sin embargo, en los últimos años, las memorias de sostenibilidad se han convertido en la principal vía de comunicación como mecanismo para legitimar las actuaciones de las empresas ante sus stakeholders. Así, nuestro objetivo es explorar y analizar el medio de comunicación que están empleando las empresas para suministrar información voluntaria sobre sus recursos intangibles ocultos. Los resultados obtenidos permiten concluir que se ha producido un cambio en la política de información empresarial y las memorias de sostenibilidad se han convertido en el principal soporte para suministrar información voluntaria a los stakeholders, además de ser un buen medio para suministrar información de los recursos intangibles.

  17. Memoria Anual 2015

    OpenAIRE

    Autoridad Nacional del Agua

    2016-01-01

    Presenta la Memoria Institucional 2015 de la Autoridad Nacional del Agua - ANA, destacando las principales actividades y logros alcanzados compatibles con los objetivos institucionales y su misión. La publicación está estructurada en cuatro partes: nuestra entidad, nuestros logros, estados financieros y principales desafíos.

  18. Aplicación de modelo ARIMA para el análisis de series de volúmenes anuales en el río Magdalena

    OpenAIRE

    Amaris, Gloria; Ávila, Humberto; Guerrero, Thomas

    2017-01-01

    Resumen Contexto: Los efectos del cambio climático, intervenciones humanas y características de los ríos, son factores que incrementan el riesgo en la población y de los recursos hídricos. Sin embargo, impactos negativos como inundaciones y desecación de ríos pueden ser identificados previamente mediante el uso de herramientas de modelación adecuadas. Objetivos: Se estima un modelo ARIMA para el análisis de series de tiempo de volúmenes anuales (millones de m³/año) en el río Magdalena usando ...

  19. Ciclo anual de la clorofila-α satelital en el archipiélago de Juan Fernández (33°S), Chile

    OpenAIRE

    Andrade,Isabel; Hormazabal,Samuel E; Correa-Ramirez,Marco A

    2012-01-01

    La variabilidad espacial y temporal del ciclo anual de la clorofila-α en el archipiélago de Juan Fernández se analiza usando ocho anos de datos satelitales de clorofila-α, viento, corrientes y nivel del mar. Este archipiélago está conformado por tres islas: Robinson Crusoe-Santa Clara (RC-SC) y Alejandro Selkirk (AS). Las islas RC-SC se encuentran en una región de alta energía cinética y mayores concentraciones de clorofila-α definida como Zona de Transición Costera, en cambio ...

  20. Aspectos hidro-limnológicos en las ciénagas de Chucuri y Aguas Negras (Magdalena Medio, Colombia) durante un ciclo anual

    OpenAIRE

    García Lozano Luis Carlos; Márquez Calle Germán; Pedraza Gilma Estella

    1989-01-01

    El presente estudio analiza características hrdrológicas-limnológicas de la estructura y funcionamiento de las ciénagas de Chucuri y Aguas Negras localizadas en la planicie aluvial del Valle Medio del rio Magdalena. Se basa en seguimientos bimensuales en diez estaciones de muestreo, durante el ciclo anual: abril de 1983 a marzo de 1984. Se resalta la presencia de dos estadios definidos asociados al régimen de inundación y sequia con rasgos característicos en la comunidad fitoplanctón...

  1. Materialism.

    Science.gov (United States)

    Melnyk, Andrew

    2012-05-01

    Materialism is nearly universally assumed by cognitive scientists. Intuitively, materialism says that a person's mental states are nothing over and above his or her material states, while dualism denies this. Philosophers have introduced concepts (e.g., realization and supervenience) to assist in formulating the theses of materialism and dualism with more precision, and distinguished among importantly different versions of each view (e.g., eliminative materialism, substance dualism, and emergentism). They have also clarified the logic of arguments that use empirical findings to support materialism. Finally, they have devised various objections to materialism, objections that therefore serve also as arguments for dualism. These objections typically center around two features of mental states that materialism has had trouble in accommodating. The first feature is intentionality, the property of representing, or being about, objects, properties, and states of affairs external to the mental states. The second feature is phenomenal consciousness, the property possessed by many mental states of there being something it is like for the subject of the mental state to be in that mental state. WIREs Cogn Sci 2012, 3:281-292. doi: 10.1002/wcs.1174 For further resources related to this article, please visit the WIREs website. Copyright © 2012 John Wiley & Sons, Ltd.

  2. Materials

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2009-02-01

    Full Text Available . It is generally included as part of a structurally insulated panel (SIP) where the foam is sandwiched between external skins of steel, wood or cement. Cement composites Cement bonded composites are an important class of building materials. These products... for their stone buildings, including the Egyptians, Aztecs and Inca’s. As stone is a very dense material it requires intensive heating to become warm. Rocks were generally stacked dry but mud, and later cement, can be used as a mortar to hold the rocks...

  3. Variación anual de la biomasa de Nymphoides fallax Ornduff (Menyanthaceae en la Laguna de Tecocomulco, Hidalgo, México

    Directory of Open Access Journals (Sweden)

    Agustin Quiroz-Flores

    2015-07-01

    Full Text Available Durante un ciclo anual se cuantificó la variación en la estratifi cación vertical de la biomasa deNymphoides fallaxy se analizaron las variables físicas y químicas del agua y sedimentos de la laguna de Tecocomulco, Hidalgo. La producción anual neta de N. fallax fue de 3 070.1 g PS m2. En el mes de junio la biomasa alcanzó su máximo (958.4 g PS m2 . La contribución de biomasa foliar de N. fallax a la proporción total de biomasa representa el 10%, la de peciolos alcanza el 40% y la contribución de biomasa subterránea equivale en ocasiones a más del 50%. El nivel de fósforo en los sedimentos se encuentra por arriba de la cantidad necesaria para sostener la producción vegetal (= 0.04%. Por los resultados obtenidos en este estudio, se puede señalar que en aquellas zonas ribereñas de la laguna en donde los agricultores han construido bordos, se propicia que durante la época de lluvias la columna de agua cambie bruscamente sus dimensiones pasando de 10 cm hasta alcanzar los 75 cm de profundidad y se eleven los niveles de fósforo en agua y sedimentos, lo que a su vez induce queNymphoides fallaxse vea estresada, y en un caso extremo, temporalmente sea sustituida por aquellas especies mejor adaptadas a las nuevas condiciones físicas y químicas del medio.

  4. Variação do incremento anual ao longo do fuste de Pinus taeda L. em diferentes idades e densidades populacionais.

    Directory of Open Access Journals (Sweden)

    César Martins Andrade

    2010-08-01

    Full Text Available A variação do crescimento anual em diferentes alturas do fuste de Pinus taeda L. foi estudada por meio da análise de tronco em árvores do estrato dominante e médio. Foram coletadas secções transversais ao longo do fuste de 9 árvores-amostra, tomadas na base, à altura do peito (DAP, e após, a cada metro. A amostragem foi constituída de 4 árvores provenientes de Canela, Rio Grande do Sul, em floresta com 17 anos de idade, submetida a um desbaste, e 5 árvores de Ponte Alta do Norte, Santa Catarina, em floresta com 34 anos, submetida a cinco desbastes. Os resultados, expressos na forma percentual do incremento em área basal na posição "i", sobre o incremento em área basal ao nível do DAP, mostraram a forte variação na deposição anual de lenho ao longo do fuste em função da densidade populacional, caracterizando os efeitos da competição e da liberação pela execução do desbaste. Árvores sujeitas à competição mostraram maior crescimento nas partes superiores do fuste, enquanto que árvores sob menor concorrência apresentaram maior crescimento em posições inferiores, facilmente identificadas pela forma e inclinação das curvas de incremento.

  5. Recria de borregas sob diferentes métodos de pastoreio em azevém anual em sucessão a lavoura

    Directory of Open Access Journals (Sweden)

    Stefani Macari

    2011-10-01

    Full Text Available O objetivo deste trabalho foi avaliar a recria de borregas em pastagem de azevém anual (Lolium multiflorum em sucessão a lavouras de milho ou soja, manejadas em intensidades de pastejo moderada ou baixa, com métodos de pastoreio rotativo ou contínuo. Utilizou-se o delineamento experimental de blocos ao acaso em arranjo fatorial 2 intensidades x 2 métodos de pastoreio, com quatro repetições. Não houve interação entre os métodos e as intensidades de pastejo. A intensidade de pastejo baixa determinou maior massa média de forragem e altura do pasto. A altura e a massa de forragem foram maiores no pastoreio rotativo. Não houve diferença para ganho médio diário. Houve diferença significativa para carga animal para o método rotativo e a intensidade de pastejo moderada. O ganho de peso por hectare foi maior para intensidade de pastejo moderada. A intensidade de pastejo e o método de pastoreio empregados não afetaram a produtividade de soja ou milho em sucessão. A forragem disponível é a principal determinante da produtividade do sistema integrado, independentemente do método de pastoreio.

  6. Variáveis morfogênicas e estruturais de azevém anual (Lolium multiflorum Lam. manejado em diferentes alturas

    Directory of Open Access Journals (Sweden)

    Pontes Laíse da Silveira

    2003-01-01

    Full Text Available Variáveis morfogênicas e estruturais foram quantificadas a partir da técnica de "perfilhos marcados" no período de agosto a outubro de 1999 numa pastagem de azevém anual, mantida em quatro diferentes alturas (5, 10, 15 e 20 cm através de lotação contínua em carga variável com ovinos. O delineamento experimental foi o de blocos completos casualizados com três repetições. Utilizaram-se 50 perfilhos marcados por unidade experimental, distribuídos ao longo de transectas. As observações foram efetuadas em dois períodos: no primeiro, da entrada dos animais até a obtenção das alturas pretendidas, não se observaram diferenças entre os tratamentos. No segundo (fase de estabilização das alturas pretendidas, a taxa de elongação foliar, o comprimento da lâmina verde total por perfilho e o tamanho das folhas apresentaram resposta positiva frente a maiores alturas de manejo, enquanto o tempo de elongação da lâmina foliar diminui com a altura. As variáveis taxa de surgimento de folhas, tempo de vida das folhas, densidade populacional de perfilhos e número de folhas vivas por perfilho não foram afetadas pelos tratamentos.

  7. Estudio de Aplicación del Análisis Regional de Frecuencias Basado en L-Momentos al Caso de las Precipitaciones Anuales en la Provincia de Camagüey, Cuba

    Directory of Open Access Journals (Sweden)

    Raidel Báez Prieto

    Full Text Available Resumen En esta investigación se presenta un caso de estudio de aplicación del procedimiento conocido como Análisis Regional de Frecuencias basado en L-momentos, al estudio de las precipitaciones anuales en la provincia de Camagüey, Cuba. Se ha adoptado la mencionada metodología por ser un procedimiento estadísticamente robusto para compensar la carencia de registros históricos de larga data por su abundancia en el área de estudio. La aplicación de la metodología permitió la estimación de las probabilidades y períodos de retornos de las precipitaciones anuales (cuantil de interés así como la obtención de mapas de frecuencia.

  8. Tendências na variabilidade climática sazonal e anual das temperaturas máxima e mínima do ar no Estado do Paraná

    OpenAIRE

    Minuzzi,Rosandro Boligon; Caramori,Paulo Henrique; Borrozino,Edmirson

    2011-01-01

    O presente trabalho teve por objetivo analisar a variabilidade sazonal e anual das temperaturas máxima e mínima do ar no Estado do Paraná. A Análise de Regressão e o teste de Kendall foram utilizados para testar a tendência das médias de temperatura máxima e mínima, do número de dias com registros de temperatura inferior a 3 °C, dos eventos extremos e valores absolutos diários da temperatura máxima e mínima nas escalas sazonal (verão, outono, inverno e primavera) e anual. Os pontos de descont...

  9. Relatorio: Reforma universitaria (Report: University Reform).

    Science.gov (United States)

    Ministerio da Educacao e Cultura, Rio de Janeiro (Brazil).

    This document is an English-language abstract (approximately 1,500 words) of a report by 11 experts invited by the Ministry of Education and Culture to give their views on Brazilian university reforms. The introduction to the report states the principles underlying the proposals for reform adapted to the current social transformation in Brazil.…

  10. Tendências na variabilidade climática sazonal e anual das temperaturas máxima e mínima do ar no Estado do Paraná

    Directory of Open Access Journals (Sweden)

    Rosandro Boligon Minuzzi

    2011-01-01

    Full Text Available O presente trabalho teve por objetivo analisar a variabilidade sazonal e anual das temperaturas máxima e mínima do ar no Estado do Paraná. A Análise de Regressão e o teste de Kendall foram utilizados para testar a tendência das médias de temperatura máxima e mínima, do número de dias com registros de temperatura inferior a 3 °C, dos eventos extremos e valores absolutos diários da temperatura máxima e mínima nas escalas sazonal (verão, outono, inverno e primavera e anual. Os pontos de descontinuidade obtidos pelo Teste de Homogeneidade Normal Padrão mostram resultados mais expressivos para a temperatura máxima anual e no outono. Para esta variável meteorológica os pontos foram obtidos predominantemente no início da década de 2000. Na temperatura máxima anual e, principalmente na temperatura mínima, em todas as escalas de tempo, houve tendência de aumento. Esse aumento relativamente maior da temperatura mínima sugere uma diminuição na amplitude térmica no Paraná. Os valores dos extremos diários da temperatura mínima estão sendo maiores, porém, menos freqüentes. Por outro lado, as temperaturas máximas têm sido mais intensas e freqüentes, especialmente na primavera.

  11. Sequías en el sur de la península de Yucatán: análisis de la variabilidad anual y estacional de la precipitación

    Directory of Open Access Journals (Sweden)

    Sofía Márdero

    2012-07-01

    Full Text Available Este estudio analiza la variabilidad espacial y temporal de la precipitación en el sur de la península de Yucatán, a través de anomalías y tendencias de la precipitación anual y estacional y la ocurrencia de sequías meteorológicas, empleando datos de lluvia de nueve estaciones meteorológicas para el periodo de 1953-2007. Utilizando tendencias de regresión lineal anuales y estacionales se analizó el aumento o la disminución de las precipitaciones durante este periodo. Las anomalías de precipitación permitieron evaluar la estabilidad, el déficit o superávit de precipitación para cada año, y el método quintil permitió la clasificación de la intensidad de las sequías meteorológicas. Los resultados muestran una considerable variabilidad espacial y temporal, con mayores valores de precipitación y anomalías en la costa, que van disminuyendo gradualmente hacia el Centro-Oeste del área en estudio. Durante este periodo hay una disminución de la precipitación anual y de la estación húmeda, en gran parte de la zona la cual alcanza una disminución de 12 mm anuales (estación Chachobben. Estaciones como Zoh Laguna Campeche muestran claramente un aumento en los años de sequía (desde leve hasta extrema a partir de 1985 principalmente. Este estudio contribuye a un major conocimiento de la variación regional de la precipitación y sus posibles vínculos con el Cambio Climático a escala regional y global.

  12. Costo anual per cápita en primer nivel de atención por género Cost per capita in outpatients by gender

    Directory of Open Access Journals (Sweden)

    Enrique Villarreal-Ríos

    2011-03-01

    Full Text Available El objetivo de este artículo es estimar el costo per cápita anual por género en primer nivel de atención. MÉTODOS: estudio de costo realizado en Unidades de Medicina Familiar en México. La información correspondió al año 2004 y el estudio se dividió en perfil de uso y costo de la atención. PERFIL DE USO DE LO SERVICIOS: se estudiaron los registros clínicos de 1,585 pacientes adscritos a unidades de medicina familiar. El perfil de uso se definió mediante el promedio y los motivos de atención por departamento, género y grupo de edad. COSTO DE LA ATENCIÓN: estimado en dólares estadounidenses incluyó costo unitario fijo (departamentalización ajustada por productividad, el costo unitario variable (técnica de microcosteo, costo unitario por departamento y motivo de atención, y costo unitario por departamento, quinquenio y género. La esperanza de vida fue de 73 años para los hombres y 78 para las mujeres. Se identificaron tres escenarios. RESULTADOS: el costo anual per capita es superior en la mujer US $73.24 (IC 95% $11.38 - $197.49 que en el hombre $ 53.11 (IC 95% 2.51 - 207.71. CONCLUSIÓN: en primer nivel de atención el costo per cápita en las mujeres es mayor que en los hombres, información valiosa en el proceso de planeación de los servicios de salud.The objective of this study is to identify the annual cost per capita by gender in first level of attention. It is a cost study in Family Physician Units in Mexico. The information corresponded to the year of 2004 and the study divided in the use profile and cost attention. USE PROFILE OF SERVICES: it was studied 1,585 clinical registries of patients, use profile defined by average and attention reasons by department, gender and age group. COST ATTENTION: considered in American dollars it included fixed unit cost (departmentalization adjusted by productivity, variable unit cost (micro cost technical, department unite cost by type attention, and department unit cost by age

  13. Estimated annual cost of arterial hypertension treatment in Brazil Costo estimado anual del tratamiento de la hipertensión arterial en Brasil

    Directory of Open Access Journals (Sweden)

    Murilo W. Dib

    2010-02-01

    Full Text Available OBJECTIVES: To estimate the direct annual cost of systemic arterial hypertension (SAH treatment in Brazil's public and private health care systems, assess its economic impact on the total health care budget, and determine its proportion of the 2005 gross domestic product (GDP. METHODS: A decision tree model was used to determine direct costs based on estimated use of various resources in SAH diagnosis and care, including treatment (medication and non-medication, complementary exams, doctor visits, nutritional assessments, and emergency room visits. RESULTS: Estimated direct annual cost of SAH treatment was approximately US$ 398.9 million for the public health care system and US$ 272.7 million for the private system, representing 0.08% of the 2005 GDP (ranging from 0.05% to 0.16%. With total health care expenses comprising about 7.6% of Brazil's GDP, this cost represented 1.11% of overall health care costs (0.62% to 2.06%-1.43% of total expenses for the Unified Healthcare System (Sistema Único de Saúde, SUS (0.79% to 2.75% and 0.83% of expenses for the private health care system (0.47% to 1.48%. Conclusion. To guarantee public or private health care based on the principles of universality and equality, with limited available resources, efforts must be focused on educating the population on prevention and treatment compliance in diseases such as SAH that require significant health resources.OBJETIVOS: Estimar el costo directo anual del tratamiento de la hipertensión arterial sistémica (HAS en los sistemas sanitarios público y privado de Brasil, evaluar su impacto económico en el presupuesto total de salud y determinar la proporción del producto interno bruto (PIB que ocupó en 2005. MÉTODOS: Se empleó un modelo de árbol de decisión para determinar los costos directos según el uso estimado de varios recursos en el diagnóstico y la atención de la HAS, incluidos el tratamiento (con medicamentos y sin ellos, los exámenes complementarios

  14. Información del conocimiento organizacional a través de los informes anuales publicados en las páginas web de las empresas

    Directory of Open Access Journals (Sweden)

    Tejedo Romero, Francisca

    2014-03-01

    Full Text Available Internet is a means of communication and transmission of information that has led companies to develop their business activities in knowledge-based economies. Knowledge has become the most important resource for creating competitive advantages, specifically the knowledge incorporated by companies into their processes, systems, culture, R&D, i.e., their organizational knowledge (Structural Capital. Therefore, Structural Capital disclosures by companies can improve their reputation. Thus, the objective of our work has focused on analysing the information on organizational knowledge supplied by companies in annual reports posted on their websites, as well as on its evolution over the years studied.Internet es un medio de comunicación y transmisión de información que ha dado lugar a que las empresas desarrollen su actividad en economías basadas en el conocimiento. El conocimiento se ha convertido en el recurso más importante para la creación de ventajas competitivas, en particular el conocimiento que las empresas han incorporado en sus procesos, sistemas, cultura, I+D, es decir, su conocimiento organizacional (Capital Estructural. Por ello, la publicación de información por parte de las empresas sobre su Capital Estructural puede mejorar la reputación de las mismas. Así, el objetivo de este trabajo se ha centrado en analizar la cantidad de información sobre el conocimiento organizacional que suministran las empresas en los informes anuales obtenidos de sus páginas web, así como la evolución sufrida en los años objeto de estudio.

  15. Use of correlation and linear regression to increase annual stream flow records; Uso de la correlacion y la regresion lineal para ampliar registros de volumenes escurridos anuales

    Energy Technology Data Exchange (ETDEWEB)

    Campos-Aranda, D.F. [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    1999-03-01

    Firstly, the estimates of standard deviation and arithmetic mean as basic statistical parameters are emphasised, which point out the variability and magnitude of annual streamflow records in the hydrological studies of planning water-resource developments inside a region. Then the equations for quantitative evaluations of statistical convenience of extending a short stream flow record are described in detail. The previous makes use of additional and common data in one or two closer hydrometric stations, with this the short observed record has a certain correlation (dependence or association). Later two numerical applications to real problems are given, the first one for the two dimensional model, which uses a closed hydrometric station in order to extend the short record, and the second application for the three dimensional model which makes use of two auxiliary hydrometric stations. Lastly, three general observations about the paper are cited. [Spanish] Inicialmente se destaca la importancia de las estimaciones de la medida y la desviacion estandar como parametros estadisticos basicos, los cuales caracterizan la magnitud y la variabilidad de los volumenes escurridos anuales en los estudios hidrologicos de planeacion del aprovechamiento de los recursos hidraulicos de una region. Enseguida, se describen con detalle las ecuaciones que permiten evaluar cuantitativamente si es conveniente o no, desde un punto de vista estadistico, ampliar el registro corto de escurrimientos, con base en datos comunes, adicionales y disponibles; esto en una o dos estaciones hidrometricas cercanas, con las cuales, el registro reducido guarda cierta correlacion (dependencia o asociacion). Lo anterior, significa evaluar si con base en el registro ampliado, las estimaciones de la medida y la variancia mejoran estadisticamente. Posteriormente, se realizan dos aplicaciones numericas a casos reales; una, para el modelo bidimensional que utiliza una estacion hidrometrica cercana para ampliar el

  16. Prevalencia anual de trastornos y uso de servicios de salud mental en el Perú: Resultados del estudio mundial de salud mental, 2005

    Directory of Open Access Journals (Sweden)

    Marina Piazza

    Full Text Available Objetivos: Estimar la prevalencia anual de 18 trastornos mentales según, sus correlatos sociodemográficos y la frecuencia de utilización de servicios de salud mental de la población de 18 a 65 años de edad, residente en áreas urbanas de cinco ciudades del Perú. Materiales y métodos. El Estudio Mundial de Salud Mental (EMSM en Perú utilizó la Entrevista Diagnóstica Internacional Compuesta, que proporciona diagnósticos de acuerdo con el DSMIV y el CIE-10. Se realizó con una muestra probabilística multietápica en Lima, Arequipa, Huancayo, Iquitos y Chiclayo entre julio del 2004 y diciembre del 2005. Resultados. La prevalencia de trastornos mentales en los últimos doce meses, fue de 13,5% siendo más frecuentes los de ansiedad (7,9%, estado de ánimo (3,5%, control de impulsos (3,5% y uso de sustancias (1,7%. Las personas viudas, separadas y divorciadas evidenciaron mayor riesgo de presentar un trastorno en el último año que los casados o convivientes. Solo 32,8% de quienes presentaron trastornos severos de salud mental en los últimos 12 meses recibieron algún tipo de tratamiento; entre quienes presentaron trastornos moderados 18,1%; y entre quienes presentaron trastornos leves, 15,4%. Conclusiones. Más de 13 de 100 peruanos han presentado un trastorno de salud mental en el último año. La magnitud de los trastornos de salud mental y la brecha de atención pone en evidencia la urgente necesidad de dirigir atención y recursos hacia la detección y tratamiento oportuno de las enfermedades mentales en el Perú

  17. La retribución a la Residencia Anual de los Canónigos en la Iglesia de Toledo (S. XVI

    Directory of Open Access Journals (Sweden)

    Susana Villaluenga de Gracia

    2010-06-01

    Full Text Available Este artículo pretende continuar con el estudio del sistema retributivo del clero catedralicio de Toledo, ahondado esta vez en el vestuario de los canónigos.En la catedral de Toledo, al igual que en otras catedrales, una parte de las rentas eclesiásticas se destinaba al clero catedralicio para cubrir el alimento (refitor y el vestido (vestuario. El primero concernía a la consunción y el segundo a la perfección.El vestuario era la principal renta que recibía un canónigo de la Iglesia de Toledo, haciéndolo en orden a la dignidad conferida. Procedía de los diezmos de pan y vino que se recogían en el arzobispado y remuneraba la residencia anual. Se complementaba con otros recursos como las rentas procedentes del préstamo de Baza y el de Hita.The purpose of this paper is to continue studying the compensation system cathedral clergy of Toledo in the sixteenth century, this time on the vestuario of the canons.In this cathedral, as in one other, a part of the income was allocated to the cathedral clergy to cover the food (refitor and clothing (vestuario. The first one was concerning the consumption and the second one to the perfection.The vestuario was the main income that was receiving a canon of the Church of Toledo, so in order to dignity conferred. It was coming from the tithes of wheat and wine which were collected in the archbishopric of Toledo. Each canon received, together with income from refitor, the vestuario as an incentive for annual residency, along with other additional income from various loans as of Baza and de Hita.

  18. Comparação de métodos de medida indireta de massa de forragem em pasto de azevém anual (Lolium multiflorum Lam.

    Directory of Open Access Journals (Sweden)

    Cauduro Guilherme Fernandes

    2006-01-01

    Full Text Available Este trabalho foi realizado de maio a outubro de 2003, na Estação Experimental da Universidade Federal do Rio Grande do Sul (EEA-UFRGS, tendo como objetivo avaliar e comparar a precisão do disco medidor de forragem, do bastão graduado e do medidor de capacitância em predizer a massa de forragem de pastagens de azevém anual. O trabalho constou de dois experimentos: o experimento 1 no qual foram avaliados os três métodos numa situação em que o azevém apresentava-se em fase de estabelecimento num delineamento completamente casualizado, com 32 repetições e três tratamentos; e o experimento 2, no qual foi avaliada a massa de forragem pré e pós-pastejo pelo bastão graduado e pelo disco medidor em potreiros sob lotação rotacionada. O delineamento experimental do experimento 2 foi o de blocos completamente casualizados, com quatro repetições; os tratamentos constaram de duas intensidades de pastejo (baixa e moderada definidas por ofertas de forragem de 2,5 ou 5,0 vezes o potencial de consumo dos cordeiros que foram utilizados. No experimento 1, o bastão graduado apresentou o melhor coeficiente de determinação com a massa de forragem (r²=0,65. No experimento 2, os melhores coeficientes de determinação foram obtidos quando o pasto, sob lotação rotacionada, foi avaliado com o bastão graduado.

  19. Variación anual de las propiedades insecticidas de Peumus boldus sobre Sitophilus zeamais Annual variation of insecticide properties of Peumus boldus on Sitophilus zeamais

    Directory of Open Access Journals (Sweden)

    Felipe Pérez

    2007-05-01

    Full Text Available El objetivo del presente trabajo fue determinar la variación anual en las propiedades insecticidas de Peumus boldus Molina, en el control de Sitophilus zeamais Motschulsky, bajo condiciones de laboratorio. El polvo de hojas de P. boldus se evaluó durante 12 meses, en concentraciones de 0,5, 1 y 2% (p/p. Se evaluaron 36 tratamientos con tres repeticiones, en un diseño experimental completamente al azar, con un arreglo factorial. Se determinó el porcentaje de mortalidad y emergencia de insectos adultos e inmaduros y pérdida de peso y germinación del grano. La mayor mortalidad se obtuvo en los meses de agosto y septiembre de 2003, para las tres concentraciones con un 100%, mientras que la menor fue en mayo de 2003, cuando solo la concentración de 2% fue próxima a 100% de mortalidad. La menor emergencia de insectos adultos y pérdida de peso se obtuvieron en los mismos tratamientos. El efecto sobre estados inmaduros fue menor que contra adultos, y la germinación de los granos de maíz fue afectada por los polvos de P. boldus. Las propiedades insecticidas del polvo de hojas de P. boldus no son estables durante el año, Mayo es el mes con la menor eficacia insecticida, y la germinación de las semillas se ve afectada por el polvo.The objective of this work was to determine the annual variation of Peumus boldus Molina insecticidal properties for the control of Sitophilus zeamais Motschulsky, under laboratory conditions. The powder of P. boldus leaves was evaluated, during 12 months, in 0.5, 1, and 2% (w/w concentrations. Thirty-six treatments, with three replications, were evaluated in a completely randomized experimental design, with a factorial arrangement. Evaluations were made for adult and immature insect percentage mortality and emergence, grain weight loss and seed germination. The greatest mortality was obtained in August and September 2003, in the three concentrations with 100%, and the lowest mortality was registered in May 2003

  20. Proceedings of the 9 annual conference of the Mexican association for the energy economy. The energy security; 7. Conferencia anual de la asociacion mexicana para la economia energetica. seguridad energetica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The Asociacion Mexicana para la Economia Energetica (Mexican Association for the Energy Economy) summoned by the ninth occasion to its annual congress under the subject Power Assurance with the objective of analyzing the Power Assurance of Mexico in terms of general accessibility to power resources, of reliable and total availability of these, and their acceptability in relation to the environment; analysis from which recommendations of power policy will be derived. Six panels were constituted around the following analysis points: The geopolitical surroundings, certainties and uncertainties - where the irruption of new Asian demanding countries is analyzed, the uncertain continuity of provisions in Europe and the new power Latin American nationalism as tension centers and new areas of stressfulness are also analyzed -, energy Balances and markets in the American continent - focused on the type of anticipated evolution of the availability of oil and natural gas in Mexico along with its processing capacity -, Assurance of raw materials for the electrical generation - in direct relation with the present and future availability of own conventional resources, the characteristics and behavior of energy international markets of primary energy sources and of the access to technologies such as nuclear power stations-. Assurance of raw materials for the transport and the industry - focused on the resolution of the bottle necks that sometimes its availability is put under -. The energy assurance and the medium and long term development - knowing that the energy sector in Mexico is co-dependent and the decision making with respect to its financing must be based on realities and not in fantasies -, Policies for the power assurance - where a summary is presented, conclusions and recommendations of energy policy; the medium and long term attention requires to be initiated now. [Spanish] La Asociacion Mexicana para la Economia Energetica convoco por novena ocasion a su congreso

  1. Cambios histomorfológicos en el ovario del pez capitán, Eremophilus mutisii Humboldt 1805 (Pisces: Trichomyteridae, durante el ciclo reproductivo anual,en la laguna del Muña, sistema río Bogotá, Colombia

    Directory of Open Access Journals (Sweden)

    Plutarco Cala Cala

    1982-01-01

    Full Text Available The principal aim of this investigation was to study the anual morpho-histological changes in the ovary of the fish capitan, Eremophilus mutisii, in the Rio Bogota basin in Colombia, with regard to the reproductive cycle, size of the mature fishes and seasonal changes in the environment. The fibs material was collected monthly. The gonads were fixed in Bouin's fixative. Subsequently they were washed several times in 70% ethanol. Transversal sections of about 5 cm in length, each of which produced 10 slides with 10 or so sections per slide, were taken from the center to the anterior portion of the right ovary of each fish, since no macroscopic significant differencie was observed in the oogenic process in the anterior, central and posterior portion of the ovary. The sections were dehydrated in tetrahydrofuran and embedded in paraffin. Sections were cut at 6 microns and stained with haematoxylin and eosin (H & E. The gonosomatic index (GSI or maturity index (MIl was calculated.

  2. El ciclo anual de la hidrología de Colombia en relación con el ENSO y la NAO

    Directory of Open Access Journals (Sweden)

    1998-01-01

    Full Text Available INFLUENCE DE L’ENSO ET DE LA NAO SUR LE CYCLE ANNUEL DE L’HYDROLOGIE DE COLOMBIE. On évalue l’impact de El Niño-Oscillation du Sud (ENSO et de l’Oscillation de l’Atlantique Nord (NAO sur le cycle annuel hydrologique colombien. Les résultats du Projet de Réanalyse Climatologique NCEP/NCAR ont été utilisés pour identifier les mécanismes de la circulation atmosphérique qui interviennent dans cette région au cours des phases extrêmes de l’ENSO. En particulier, l’affaiblissement du courant jet inférieur d’ouest, qui se propage du Pacifique vers l’intérieur de la Colombie, est l’un des principaux mécanismes de circulation susceptible de nous aider à expliquer les anomalies hydrologiques en situation El Niño. Les résultats confirment l’importance de l’influence de l’ENSO et de la NAO sur les précipitations et les débits de Colombie, en particulier au cours des trimestres de septembre-octobre-novembre et de décembre-janvier-février. Se cuantifica la dependencia del ciclo anual de la hidroclimatología de Colombia con respecto del fenómeno El Niño-Oscilación del Sur (ENSO y la Oscilación del Atlántico Norte (NAO. Se usan los resultados del Proyecto de Reanálisis Climático de NCEP/NCAR para identificar los mecanismos de la circulación involucrados en las anomalías climáticas en la región de Suramérica tropical durante las fases extremas del ENSO (El Niño y La Niña. De particular importancia, el debilitamiento, durante El Niño, de la corriente de chorro superficial del oeste que penetra desde el Océano Pacífico hacia el interior de Colombia es un mecanismo de la circulación que coadyuva para explicar las anomalías hidrológicas. Los resultados confirman la fuerte influencia del ENSO y la NAO sobre las lluvias y los caudales de Colombia, en particular durante los trimestres septiembre-octubre-noviembre y diciembre-enero-febrero. THE ANNUAL CYCLE OF THE HYDROLOGY IN COLOMBIA IN RELATION TO THE ENSO AND NAO

  3. Evidencias de cambio climático en Colombia: tendencias y cambios de fase y amplitud de los ciclos anual y semianual

    Directory of Open Access Journals (Sweden)

    1998-01-01

    Full Text Available ÉVIDENCES DE CHANGEMENT CLIMATIQUE EN COLOMBIE : TENDANCES, CHANGEMENTS DE PHASE ET AMPLITUDE DES CYCLES ANNUELS ET SEMI-ANNUELS. On a utilisé plusieurs techniques d’analyse pour mettre en évidence des changements climatiques en Colombie. On a montré une nette tendance au réchauffement des températures minimales et moyennes. Les chroniques de points de rosée et de pression de vapeur d’eau indiquent une augmentation de l’humidité de l’atmosphère qui va de pair avec un réchauffement. Par contre les séries de précipitations ne montrent pas de tendance bien définie. Les débits des principaux bassins ont tendance à diminuer, ce qui pourrait être relié aux variations de l’évapotranspiration. Une analyse par démodulation complexe confirme ces tendances dans plusieurs parties de la Colombie. Ces résultats pourraient être d’une grande utilité pour l’estimation des ressources hydriques, la planification et la gestion des systèmes hydrauliques. Se implementan varias técnicas estadísticas de análisis para identificar señales de cambio climático en registros hidrológicos y climáticos de Colombia. Hay clara tendencia de calentamiento que se observa en las series de temperaturas mínimas y que concuerda con las series de temperaturas medias. Las series de punto de rocío y presión de vapor indican un aumento en la humedad atmosférica. Esta tendencia coincide con el calentamiento. Las series de precipitación no muestran señal clara de cambio climático. Las principales cuencas presentan tendencia decreciente en los caudales. Los resultados de Demodulación Compleja ratifican los resultados descritos anteriormente y permiten establecer corrimientos en las fases de los ciclos anual y semianual de diversas variables climáticas en Colombia. Estos resultados tienen implicaciones fundamentales para la disponibilidad del recurso hídrico y para el planeamiento y manejo de sistemas hidráulicos. EVIDENCES OF CLIMATE CHANGE IN

  4. Aplicabilidade da distribuição GEV ao estudo da precipitação máxima diária anual na região sul de Minas Gerais

    Directory of Open Access Journals (Sweden)

    Alisson Souza de Oliveira

    2014-03-01

    Full Text Available A precipitação é um dos elementos climáticos de grande influência nas atividades humanas, sendo o estudo de eventos extremos de grande importância no dimensionamento de obras hidráulicas. A distribuição de probabilidades Generalized Extreme Value (GEV tem sido aplicada à hidrologia para estimativa de eventos de precipitação máxima diária anual, associados a frequências extremas (elevados tempos de retorno. Neste estudo, objetivou-se analisar a distribuição GEV, ajustada pelos métodos dos Momentos (MM, Máxima Verossimilhança (MMV e Momentos-L (ML, a séries históricas de precipitação máxima diária anual de oito estações pluviométricas na região Sul do estado de Minas Gerais. Os resultados mostraram que o método ML proporcionou melhor ajuste da distribuição GEV, sendo o único que proporcionou adequação estatística das oito séries históricas, segundo teste de Filliben. As precipitações máximas diárias anuais para as estações de Poços de Caldas e Silvanópolis, que apresentaram as situações mais críticas, variaram entre 167 mm e 297 mm, entre os tempos de retorno de cinquenta e quinhentos anos, demonstrando a potencialidade de tragédias relacionadas a eventos extremos de precipitação nestas áreas. Já as menores precipitações ocorreram nas estações de Camanducaia e Monte Sião, variando entre 103 mm e 174 mm, para o mesmo intervalo de tempos de retorno. De maneira geral, a distribuição GEV ajustada pelos métodos MV e, principalmente, ML, apresentam-se como alternativa para estimativa da precipitação máxima diária anual para diferentes tempos de retorno.

  5. Genetic structure of annual ryegrass (Lolium multiflorum populations estimated by RAPD Estrutura genética de populações de azevém anual (Lolium multiflorum estimada por RAPD

    Directory of Open Access Journals (Sweden)

    Eduardo Alano Vieira

    2004-01-01

    Full Text Available Annual ryegrass is a temperate climate annual foraging grass, grown mostly in the South of Brazil, especially in the state of Rio Grande do Sul. Despite its importance, little is known about its genetic diversity, both within and among the populations cultivated. This knowledge is of fundamental importance for developing breeding and conservation strategies. The aim of this study was to characterize the genetic diversity and structure of four populations of annual ryegrass. Three of the populations were located in Rio Grande do Sul and the fourth in Uruguay. RAPD markers were used to study the genetic diversity and structure of these populations. Analysis of 375 individuals sampled from the populations, using six RAPD primers, generated a total of 82 amplified bands. They included 73 polymorphic bands (89,02%. The value of the total genetic diversity index obtained, (0,71 was high, indicating the presence of wide genetic diversity in the four populations. Genetic structure analysis revealed that 98% of total diversity is intrapopulational, whereas interpopulational genetic diversity was only 2%. These results suggest that before these populations separated, they had gone through a period of gene exchange and, even after the separation event, gene frequency stayed at levels similar to the original levels, with no differential selection for these genes in the different cultivation areas.O azevém anual é a gramínea anual forrageira de clima temperado de maior utilização no sul do Brasil, particularmente no Estado do Rio Grande do Sul. Apesar de toda a importância que a espécie apresenta, pouco se conhece a respeito da diversidade genética presente entre e dentro das populações cultivadas. Este conhecimento é de fundamental importância para o estabelecimento das estratégias de melhoramento genético e de conservação destes materiais. O objetivo deste estudo foi caracterizar a diversidade genética e a estrutura genética de quatro

  6. Chemometrics Study of the PM2.5 Annual Organic Composition in Chapineria; Estudio Quimiometrico de la Composicion Organica Anual del PM2.5 en Chapineria

    Energy Technology Data Exchange (ETDEWEB)

    Pindado, O.; Perez, R. M.; Garcia, S.

    2013-05-01

    Due to the huge number of data obtained from a annual study of atmospheric particulate matter, designing a statistics study in order to reveal all information it must be indispensable. Present study has led us to identify several sources of particulate matter among them crustal material, wax plants, fossil fuel combustion, microbial activity and secondary organic aerosol. Moreover, these sources have been able to relate to physical phenomenon such as temperature and atmospheric stability. (Author) 15 refs.

  7. Revisão Geral e Anual da Remuneração dos Servidores Públicos: Subsídios Hermenêuticos para sua Redenção

    Directory of Open Access Journals (Sweden)

    Gustavo Terra Elias

    2011-12-01

    Full Text Available Previsto de forma clara na Constituição Federal, em seu art. 37, XI, a revisão geral e anual de vencimentos e direito que os servidores públicos pouco desfrutaram, embora a obrigação de seu pagamento já tenha sido reconhecida em decisão do STF já nos idos de 2001, na ADI 2.061-DF. Entretanto, tem prevalecido a inercia das autoridades em tomar providências para sua efetividade. Em que pese o quadro acima exposto, procuraremos desvendar a correta interpretação que se deve dispensar a este instituto jurídico, com a finalidade de demonstrar que sua adoção, nas poucas ocasiões em que teve vez, foi mal formulada. A partir das conclusões extraídas, procuraremos formular novas veredas para aplicação do instituto, especialmente demonstrar que a valorização da função publica demanda sua aplicabilidade imediata, pois seu escopo – de assegurar correção monetária dos vencimentos – tem sido sistematicamente esquecido, em prejuízo da parcela considerável dos servidores públicos.

  8. Revelation of the voluntary information about Human Capital in the Annual Reports Revelación de la información voluntaria sobre el capital humano en los informes anuales

    Directory of Open Access Journals (Sweden)

    Miguel Angel Villacorta

    2007-07-01

    Full Text Available The Financial Accounting impedes the registration on behalf of the information on the intangible of the different companies. To attenuate this situation, many companies offer voluntary data on them in the accounting documentation. This work analyzes the voluntary information of the Spanish companies about the intangible, impacting in the place that they occupy inside the Annual Report. The main conclusion of the investigation is that the companies offer the voluntary information that more it interests them for their own motivations and, however, the users of the Financial Accounting need a wider and more comparable information on the Human Capital.La normalización contable actual impide el registro de parte de la información sobre los intangibles de las diferentes empresas. Para atenuar esta situación, muchas empresas ofrecen datos voluntarios sobre ellos en la documentación contable que ofrecen a terceros. Este trabajo analiza la información voluntaria que exponen las empresas españolas cotizadas sobre los intangibles no reconocidos en el Balance, incidiendo en el lugar que ocupan dentro del Informe Anual. La principal conclusión de la investigación es que las empresas ofrecen la información voluntaria que más les interesa para sus propias motivaciones y, sin embargo, los usuarios de la Contabilidad Financiera necesitan una información más amplia y comparable sobre el Capital Humano.

  9. Transactions of the Second Annual Congress of the Sociedad Nuclear Mexicana A.C.; Memorias del Segundo Congreso Anual de la Sociedad Nuclear Mexicana A.C.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-11-01

    With no doubt, 1991 has been a good year for Nuclear Energy in Mexico. The record imposed by Laguna Verde Nuclear Power Plant, the first in his type in the world, operating without interruption in its first operating cycle, represents a splendid incentive for we all the nuclear workers. This fact is reflected in the percentage of papers presented in this congress, dealing with several aspects of Laguna Verde Central. This achievement should serve as an impulse for the development of other areas of application of nuclear energy in the country and at the same time be a reflection of the participation of the members of our society with good quality papers. In this Second Congress of Sociedad Nuclear Mexicana A.C., around thirty papers were presented in the technical sessions, in areas as: fuel management, radiation protection, reactor physics, transients analysis, nuclear materials and others. A special section is dedicated to present the experiences of the first fuel reload of Unit 1 in Laguna Verde Nuclear Power Plant,as well as different plenary meetings dedicated to subjects of general interest as advanced reactors, waste disposal and others. It is the wish of all the members of Sociedad Nuclear Mexicana A.C., that this annual meetings will be enriched with the enthusiastic participation of the scholars of nuclear field and that they represent the forum that we all need for the exchange of knowledge and experiences. (Author).

  10. Custo anual do manejo da cardiopatia isquêmica crônica no Brasil: perspectiva pública e privada Annual cost of ischemic heart disease in Brazil: public and private perspective

    Directory of Open Access Journals (Sweden)

    Rodrigo A. Ribeiro

    2005-07-01

    Full Text Available OBJETIVO: Estimar o custo anual do manejo da doença arterial coronária (DAC em valores do SUS e convênios. MÉTODOS: Estudo de coorte, incluindo pacientes ambulatoriais com DAC comprovada. Considerou-se para estimar custos diretos: consultas, exames, procedimentos, internações e medicamentos. Valores de consultas e exames foram obtidos da tabela SUS e da Lista de Procedimentos Médicos (LPM. Valores de eventos cardiovasculares foram obtidos de internações em hospital público e privado com estas classificações diagnósticas em 2002. O preço dos fármacos utilizado foi o de menor custo no mercado. RESULTADOS: Os 147 pacientes (65±12 anos, 63% homens, 69% hipertensos, 35% diabéticos e 59% com IAM prévio tiveram acompanhamento médio de 24±8 meses. O custo anual médio estimado por paciente foi de R$ 2.733,00, pelo SUS, e R$ 6.788,00, para convênios. O gasto com medicamentos ($ 1.154,00 representou 80% e 55% dos custos ambulatoriais, e 41% e 17% dos gastos totais, pelo SUS e para convênios, respectivamente. A ocorrência de evento cardiovascular teve grande impacto (R$ 4.626,00 vs. R$ 1.312,00, pelo SUS, e R$ 13.453,00 vs. R$ 1.789,00, para convênios, pOBJECTIVE: To estimate the annual cost of coronary artery disease (CAD management in Public Health Care System (SUS and HMOs values in Brazil. METHODS: Cohort study, including ambulatory patients with proven CAD. Clinic visits, exams, procedures, hospitalizations and medications were considered to estimate direct costs. Values of appointments and exams were obtained from the SUS and the Medical Procedure List (LPM 1999 reimbursement tables. Costs of cardiovascular events were obtained from admissions in public and private hospitals with similar diagnoses-related group classifications in 2002. The price of medications used was the lowest found in the market. RESULTS: The 147 patients (65±12 years old, 63% men, 69% hypertensive, 35% diabetic and 59% with previous AMI had an average

  11. Variação anual na abertura do dossel, temperatura e umidade do ar no sub-bosque de três ambientes florestais no sul da Bahia, Brasil

    Directory of Open Access Journals (Sweden)

    Marayana Prado Pinheiro

    2013-03-01

    Full Text Available http://dx.doi.org/10.5902/198050988445Visando contribuir para o conhecimento dos fatores físicos que afetam a estrutura da comunidade vegetal em remanescentes de mata atlântica do sul da Bahia foi analisada a variação anual do microclima do sub-bosque num fragmento de floresta de encosta na Reserva Particular do Patrimônio Natural Serra do Teimoso (RST e num sistema agroflorestal rústico utilizado para o cultivo do cacau (Cabruca, localizado nas proximidades da RST. Dados da abertura do dossel (CO, da temperatura do ar (Ta, da umidade relativa do ar (RH e do déficit de pressão de vapor (VPD foram coletados entre abril de 2005 e abril de 2006 na base (RSTB, 340 m e no topo (RSTT, 640 m da RST e na Cabruca (CB, 250 m. Dados de precipitação pluvial, Ta, RH e VPD foram também coletados numa área aberta (OA, 270 m. As maiores precipitações (> 100 mm ocorreram em Novembro de 2005 e Abril de 2006, enquanto outubro de 2005 foi o mês mais seco (< 20 mm. CO variou entre 2,5% na CB (Abril, 2006 e 7,7% na RST (Outubro, 2005. Os baixos valores de pluviosidade registrados em Outubro de 2005 afetaram VPDmax em todos os ambientes. Estes efeitos foram mais pronunciados em OA, seguido de CB, RSTB e RSTT. Os valores de Ta, RH e VPD em CB foram mais próximos aos valores observados em OA do que aos valores observados no interior da floresta.

  12. Respuesta de la regeneración natural en manglares del Golfo de Urabá (Colombia a la variabilidad ambiental y climática intra-anual

    Directory of Open Access Journals (Sweden)

    Róssalyn Hoyos G.

    2013-09-01

    Full Text Available En los bosques de mangle, tanto factores biológicos como físicos, afectan el establecimiento y los estados tempranos de desarrollo de los árboles y determinan la distribución espacial de las especies. Se evaluó la respuesta de la regeneración natural de los manglares del delta del río Turbo y la bahía El Uno a la variabilidad ambiental y climática intra-anual. Se cuantificaron la mortalidad, la sobrevivencia y el reclutamiento de las plántulas de tres especies, estacionalmente durante un año. Avicennia germinans dominó la regeneración natural, Rhizophora mangle presentó la mayor la supervivencia y Laguncularia racemosa la mayor mortalidad. Estos procesos se asociaron principalmente con el aporte de sedimentos aluviales, la disponibilidad de luz, la herbivoría, la distancia al río, a las lagunas internas y a la línea de costa, las cuales explicaron el 43% de la variación en la regeneración. La sedimentación fue la variable más importante para el reclutamiento de A. germinans, mientras la luz fue muy representativa para la supervivencia de R. mangle. Con base en registros históricos de precipitación, caudales y carga de sedimentos, se estableció que en la época con mayor precipitación se presenta un descenso en la supervivencia, y en la época seca se favorece el balance entre el reclutamiento y la mortalidad. Los resultados indicaron que la precipitación, el aporte de sedimentos y la luz desempeñan un papel importante en el proceso de la regeneración de las especies evaluadas.

  13. Relatorio: Exposicao de motivos (Report: Outline of Proposals).

    Science.gov (United States)

    Ministerio da Educacao e Cultura, Rio de Janeiro (Brazil).

    This document is an English-language abstract (approximately 1,500 words) of an outline of proposals to improve education in Brazil, both administratively and content-wise. Various administrative changes are recommended to overcome the lack of coordination existing at that point between the various services of the Ministry, precluding any coherent…

  14. 1996 Annual report; 1996 Informe anual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This annual report present information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 1996. The activities are developed in 10 chapters and 2 appendices, were are described the activities and the bases of the Argentine Regulatory System. The followings chapters and appendices are: 1.-Evolution of the nuclear regulatory activities in the Argentina since the beginnings in the CNEA. 2.-Regulatory system, laws and regulations. 3.-Institutional relations with national and international organizations. 4. and 5.-Safeguards and inspections of the nuclear installations. 6.-Radiation control of the occupational and public doses. 7.-Radiological emergencies. 8.-Projects and tasks scientific-technological. 9.-Training courses and meetings. 10.-Economic and human recourses. Appendix I.-Regulatory documentation. Appendix II.- Inspections of nuclear installations.

  15. 1997 Annual report; 1997 Informe anual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This annual report present information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 1997. The activities are developed in 11 chapters and 1 appendix, were are descripting the activities and the bases of the Argentine Regulatory System. The following chapters and the appendix are: 1.-Evolution of the nuclear regulatory activities in the Argentina. 2.-Regulatory system, laws and regulations. 3.-Institutional relations with national and international organizations. 4.-Inspections and evaluations of the nuclear reactors. 5.-Inspections and evaluations of the radioactive facilities. 6.-Inspections and evaluations of safeguards and physical protection. 7.-Radiation control of the occupational and public doses. 8.-Radiological emergencies. 9.-Projects and tasks scientific-technological. 10.-Training courses and meetings. 11.-Economic and human recourses. Appendix.- Inspections of radioactive facilities figs., tabs.

  16. 2000 Annual report; 2000 Informe anual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This annual report presents information of the main activities on the scope of radiation protection and nuclear safety of the Nuclear Regulatory Authority (NRA) of the Argentina during 2000. The following activities and developed topic in this report describe: the Argentine regulatory system; the evolution of the nuclear regulatory activities in the Argentina since the beginnings in the National Atomic Energy Commission (NAEC) of Argentina; the nuclear regulatory laws and standards; the safeguards and inspection of the nuclear facilities and nuclear power plants; the radiological emergency systems; the environmental monitoring; the institutional relations with national and international organizations; the biological and physics dosimetry; the training courses and meetings; the economic and human recourses.

  17. Variação anual de hormônios tireoideanos e características termorreguladoras de vacas leiteiras em ambiente quente Annual thyroid hormone variation and thermo regulators traits of milk cows in hot environment

    Directory of Open Access Journals (Sweden)

    Débora Andréa Evangelista Façanha Morais

    2008-03-01

    Full Text Available Este trabalho foi conduzido com o objetivo de estudar o comportamento anual de características termorreguladoras de 200 vacas leiteiras. Durante dois anos consecutivos, foram registradas a freqüência respiratória (FR e a temperatura retal (TR, bem como coletada uma amostra de sangue para dosagens de triiodotironina (T3 e tiroxina (T4. Foram também registradas a temperatura e a umidade do ar e calculados o índice de temperatura de globo e umidade (ITGU e a carga térmica radiante (CTR, nos mesmos dias de coleta. Houve efeito significativo do ano para a maioria das variáveis estudadas, no entanto, os efeitos do mês de coleta e do rebanho foram significativos para todas. Todos os valores de TR estiveram dentro da amplitude de normalidade, indicando homeotermia. A FR foi alterada em todas as épocas do ano e rebanhos, confirmando a necessidade constante de termólise. No rebanho de maior TR e a FR, houve redução da secreção de T3 e T4. Nas épocas de maiores ITGU e CTR, houve aumento da TR, seguido de maiores FR e menores concentrações plasmáticas de T3 e T4.This work was carried out with the objective to study the annual behavior of thermo regulators traits in dairy cows. Two hundred cows were used during two consecutive years and the respiratory rate (RR, rectal temperature (RT, as well as a blood sample was collected for triiodothyronin (T3 and thyroxin (T4 dosages, were recorded. Air temperature and humidity were also recorded and the black globe humidity index (BGHI and radiant heat load (RHL were calculated in the same days of data collection. There was no significative effect of the year for the majority of studied variables, however, the effects of month of collection and herd were significative for all variables. All values of RT were inside of the amplitude of normality, indicating homoeothermic condition. The RR was altered in every seasons of the year and herds, showing a constant necessity of thermolisys. In herds with

  18. Aplicação do modelo de avaliação integrado ao planejamento anual na Faculdade da Serra Gaúcha (FSG: um estudo de caso

    Directory of Open Access Journals (Sweden)

    Cláudia Medianeira Cruz Rodrigues

    2011-05-01

    Full Text Available Este artigo possui como objetivo verificar a funcionalidade do modelo de avaliação integrado ao planejamento anual proposto por Rodrigues (2003 em uma instituição privada de ensino superior, como forma de observar o desempenho dos elementos que compõem os pilares propostos pelo modelo, ou seja: (i integração entre os elementos de avaliação e planejamento; (ii uso de indicadores orientados ao planejamento; (iii seqüenciamento das atividades anuais de avaliação e planejamento; (iv estabelecimento do ciclo integrado de avaliação e planejamento; e (v integração dos recursos humanos nos processos de avaliação e planejamento. A coleta de dados envolveu duas etapas: (1 estudo de caso realizado na Faculdade da Serra Gaúcha/ Caxias do Sul-RS, no período 2004-2006; (2 entrevistas semi-estruturadas com a Comissão Própria de Avaliação, envolvendo representantes docentes, discentes e técnico-administrativos. Os resultados apontam a validade do modelo para este segmento de IES, necessitando de pequenos ajustes em termos operacionais. Verificou-se que o pilar (vda proposta aplicada foi um dos que mais interferiu na condução dos processos, ou seja, o pilar relacionado a gestão de pessoas, onde houve dificuldade principalmente na compreensão do que seja de fato uma ‘avaliação institucional’ e na importância da conscientização dos setores em relação a fornecer informações no tempo solicitado pela comissão. Desta forma, outros pilares da proposta ficaram prejudicados exatamente pela falta de cultura da instituição em perceber que o ciclo avaliação-planejamento é algo contínuo, em constante aprimoramento.

  19. Modelo matemático del riesgo anual de infección tuberculosa en Cali A mathematical model of the annual risk of tuberculosis infection in Cali, Colombia

    Directory of Open Access Journals (Sweden)

    Elmer de la Pava

    2002-03-01

    Full Text Available Objetivo. El riesgo anual de infección tuberculosa (RAI es la probabilidad de infectarse que tiene una persona sin contacto previo con el bacilo tuberculoso en el curso de un período de un año. El RAI es el indicador más apropiado para estimar la fuerza de la infección tuberculosa en una población. El objetivo de este trabajo consiste en estimar el RAI y su tendencia temporal en la ciudad de Cali, con datos proporcionados por la Secretaría Municipal de Salud. Métodos. Hemos usado un modelo determinístico para describir la dinámica de la tuberculosis pulmonar. Los flujos entre los subgrupos de población están basados en la historia natural de la enfermedad y se tienen en cuenta también los vacunados. Las condiciones iniciales y los valores de los parámetros fueron estimados a partir de los datos obtenidos. Resultados. Los valores medios del RAI en las décadas de los setenta, de los ochenta y de los noventa fueron del 1,24, 0,93 y 0,85%, respectivamente. Para evaluar la tendencia temporal, se intentó predecir el riesgo anual aplicando un ajuste por mínimos cuadrados no lineal a los datos de los porcentajes agregados de cada año. Con el polinomio que ajusta estos datos se obtuvo la tendencia hasta el año 2003, con un RAI previsto del 1,3%, que confirma un regreso al comportamiento observado en la década de los setenta. Conclusiones. El RAI estimado en Cali durante las décadas de los setenta, de los ochenta y de los noventa es muy alto si se compara con el de países como Holanda (0,012% en 1985, pero no si se compara con el de los países de Sudamérica, que van del 0,5 al 1,5%. El modelo y la simulación empleados demuestran una tendencia al aumento del RAI en la ciudad de Cali, y esa tendencia continuará si no se mejoran las medidas de control.Objective. The annual risk of infection (ARI for tuberculosis is the probability that an individual without previous contact with the tubercle bacillus has of being infected during the

  20. FLUJO DE MATERIAL PORNOGRÁFICO INFANTIL ONLINE: ESTUDIO EXPLORATORIO EN 10 PAÍSES DE AMÉRICA LATINA CON FOCO EN URUGUAY

    OpenAIRE

    Delgado Coto, Sergio; França Tarragó, Omar

    2014-01-01

    Se exploró el estado del flujo de material pornográfico infantil online en 10 países latinoamericanos, con especial atención a Uruguay, en el período anual 2011 y primeros ochos meses 2012. A partir del software especializado “Florencio”, se emprendió el rastreo de la descarga de archivos identificados con contenido pornográfico infantil en la plataforma de intercambio de tipo “punto a punto” (p2p) Ares Galaxy (Ares). A su vez, se discriminaron todas las direcciones de Internet (IP) geo-refer...

  1. Microalloyed HSLA (High Strength Low Alloy) Steels: Proceedings of Microalloying 󈨜 Held in Conjunction with the 1988 World Materials Congress, Chicago, Illinois, USA, 24-30 September 1988

    Science.gov (United States)

    1988-01-01

    strongly with other building construction materials particularly in situ , or reinforced concrete. A number Solid Hot 930-338 370-520 0.10-0.20 Mn up to of...e Agua In: XXXIX Oliveira, E.Q.. Experience in The Metallurgical Congresso Anual - ABM. Proceedings, Belo Design and Production of HSLA Steels in a...frac- these dual-phase steels. ture was observed by Im situ techniques under a HITACHI S-570 scanning electron microscope EXP REIIENTAL XfATERIALS

  2. Modelagem estatística da precipitação mensal e anual e no período seco para o estado de Minas Gerais Statistical modeling of monthly, annual and dry season mean precipitation for the State of Minas Gerais

    OpenAIRE

    Carlos R. de Mello; Antônio M. da Silva

    2009-01-01

    Objetivou-se, com o presente estudo, ajustar modelos lineares para predição da precipitação média mensal (no período úmido) e anual e no período seco, baseados nas coordenadas geográficas (latitude e longitude) e altitude para o Estado de Minas Gerais. Aplicaram-se dados diários de precipitação, provenientes da Agência Nacional de Águas (ANA) de 209 estações meteorológicas, das quais 197 foram usadas para ajuste dos modelos e 12 para sua validação final. O coeficiente de determinação ajustado...

  3. Ciclo anual de la clorofila-α satelital en el archipiélago de Juan Fernández (33°S, Chile Annual cycle of the satellite chlorophyll-a in the Juan Fernandez archipelago (33°S, Chile

    Directory of Open Access Journals (Sweden)

    Isabel Andrade

    2012-09-01

    Full Text Available La variabilidad espacial y temporal del ciclo anual de la clorofila-α en el archipiélago de Juan Fernández se analiza usando ocho anos de datos satelitales de clorofila-α, viento, corrientes y nivel del mar. Este archipiélago está conformado por tres islas: Robinson Crusoe-Santa Clara (RC-SC y Alejandro Selkirk (AS. Las islas RC-SC se encuentran en una región de alta energía cinética y mayores concentraciones de clorofila-α definida como Zona de Transición Costera, en cambio la isla AS se encuentra en una región de baja energía cinética y menores concentraciones de clorofila-α denominada Zona Oceánica. RC-SC posee un incremento de las concentraciones de clorofila-a en el lado suroeste, mientras que AS posee sus mayores concentraciones en el lado oeste, indicando la presencia de procesos forzantes diferentes. En ambas islas el ciclo anual de la clorofila es significativo y comienza a incrementar en abril, alcanzando valores relativamente altos entre junio y noviembre, disminuyendo hacia diciembre, hasta alcanzar un mínimo hacia fines de marzo. Este ciclo anual aparece desacoplado con el viento y acoplado con la energía cinética. Incrementos invernales de clorofila-a aparecen vinculados con remolinos de mesoescala provenientes de la zona continental, mientras que incrementos primaverales se podrían asociar a procesos locales vinculados al "efecto masa de isla". En ambas islas existen incrementos significativos de la clorofila-a en la banda anual y cuasi-bianual, pero sólo en AS se encontró una fluctuación significativa en la banda interanual vinculada con el Nino y la Oscilación del Sur.The spatial and temporal variability of the annual cycle of chlorophyll-a in the Juan Fernandez archipelago is analyzed through eight years of satellite data of chlorophyll-a, wind, currents and sea level. This archipelago consists of three islands: Robinson Crusoe-Santa Clara (RC-SC and Alexander Selkirk (AS. The RC-SC islands are in a

  4. Dictionary materials engineering, materials testing

    International Nuclear Information System (INIS)

    1994-01-01

    This dictionary contains about 9,500 entries in each part of the following fields: 1) Materials using and selection; 2) Mechanical engineering materials -Metallic materials - Non-metallic inorganic materials - Plastics - Composites -Materials damage and protection; 3) Electrical and electronics materials -Conductor materials - Semiconductors - magnetic materials - Dielectric materials - non-conducting materials; 4) Materials testing - Mechanical methods - Analytical methods - Structure investigation - Complex methods - Measurement of physical properties - Non-destructive testing. (orig.) [de

  5. Material Science

    Energy Technology Data Exchange (ETDEWEB)

    Won, Dong Yeon; Kim, Heung

    1987-08-15

    This book introduces material science, which includes key of a high-tech industry, new materials of dream like new metal material and semiconductor, classification of materials, microstructure of materials and characteristic. It mentions magic new materials such as shape memory alloy, fine ceramics, engineering fine ceramics, electronic ceramics, engineering plastic, glass, silicone conductor, optical fiber mixed materials and integrated circuit, challenge for new material and development of new materials.

  6. Material Science

    International Nuclear Information System (INIS)

    Won, Dong Yeon; Kim, Heung

    1987-08-01

    This book introduces material science, which includes key of a high-tech industry, new materials of dream like new metal material and semiconductor, classification of materials, microstructure of materials and characteristic. It mentions magic new materials such as shape memory alloy, fine ceramics, engineering fine ceramics, electronic ceramics, engineering plastic, glass, silicone conductor, optical fiber mixed materials and integrated circuit, challenge for new material and development of new materials.

  7. Materials and material testing

    International Nuclear Information System (INIS)

    Joergens, H.

    1978-01-01

    A review based on 105 literature quotations is given on the latest state of development in the steel sector and in the field of non-ferrous metals and plastics. The works quoted also include, preparation, working, welding including simulation methods, improvement of weldability, material mechanics (explanation of defects mechanisms by means of fracture mechanics), defect causes (corrosion, erosion, hydrogen influence), mechanical-technological and non-destructive material testing. Examples from the field of reactor building are also given within there topics. (IHOE) [de

  8. Proceedings of the 20. RAU: Annual meeting of the LNLS users. Abstracts of scientific papers; Anais da 20. RAU: Reuniao anual de usuarios do LNLS. Resumos de trabalhos cientificos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    Theoretical and experimental papers are presented in these proceedings covering the following subjects: structural biology, protein chemistry, atomic and molecular science, geoscience, environmental media, application on biological materials, soft matter, complex fluids, industrial application, structural, electronic and magnetic properties, surfaces and interfaces, and nano systems.

  9. Proceedings of the 21. RAU: Annual meeting of the LNLS users. Abstracts of scientific papers; Anais da 21. RAU: Reuniao anual de usuarios do LNLS. Resumos de trabalhos cientificos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Theoretical and experimental papers are presented in these proceedings covering the following subjects: structural biology, protein chemistry, atomic and molecular science, geoscience, environmental media, application on biological materials, soft matter, complex fluids, industrial application, structural, electronic and magnetic properties, surfaces and interfaces, and nano systems

  10. 7. Annual seminar of the scientific initiation of the Center for Development of Nuclear Technology. Abstracts; 7. Seminario anual de iniciacao cientifica do Centro de Desenvolvimento da Tecnologia Nuclear. Resumos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    This seminar presents the Scientific Initiation Program developed at the CDTN - Brazilian Center for the Development of Nuclear Technology and focuses on activities of the sectors of: radiopharmaceutical production; radiation applied to health; waste management; structural integrity; environment; nanotechnology and nuclear materials; reactor technology; mineral technology; reactor and analytical techniques.

  11. Optical materials

    International Nuclear Information System (INIS)

    Poker, D.B.; Ortiz, C.

    1989-01-01

    This book reports on: Diamond films, Synthesis of optical materials, Structure related optical properties, Radiation effects in optical materials, Characterization of optical materials, Deposition of optical thin films, and Optical fibers and waveguides

  12. Strategic Materials

    National Research Council Canada - National Science Library

    Buhler, Carl; Burke, Adrian; Davis, Kirk; Gerhard, Michelle; Heil, Valerie; Hulse, Richard; Kwong, Ralph; Mahoney, Michael; Moran, Scott; Peek, Michael

    2006-01-01

    Some materials possess greater value than others. Materials that provide essential support for the nation's economic viability or enable critical military capabilities warrant special attention in security studies...

  13. Proceedings of the 7 Annual conference of the Mexican association for the energy economy. The energy sector in Mexico: challenges and solutions. [Selected papers]; 7. Conferencia anual de la asociacion mexicana para la economia energetica. El sector energia en Mexico: retos y soluciones

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The Mexican Association for the Energy Economy (AMEE) had its VII annual conference, The energy sector in Mexico: challenges and solutions, in October, 2004. Some of the expounded topics are: technical and environmental aspects of the combined cycle power stations; analysis of the generation of electric power across biogas from sanitary landfills in Mexico; cogeneration in large power plants; methodologies for the calculation of relative efficiency: description and application of natural gas distributors in Latin American and others. [Spanish] La Asociacion Mexicana para la Economia Energetica A. C. (AMEE), llevo acabo su VII conferencia anual El sector energia en Mexico: retos y soluciones, en octubre del 2004. Algunos de los temas tratados son: Aspectos tecnicos y medioambientales de las centrales de ciclo combinado con gasificacion integrada; Analisis de la generacion de energia electrica a traves de biogas procedente de rellenos sanitarios en Mexico; Cogeneracion en grandes centrales de proceso; Metodologias para el calculo de eficiencia relativa: descripcion y aplicacion para distribuidores de gas natural en Latinoamerica y otros.

  14. Materials Chemistry

    CERN Document Server

    Fahlman, Bradley D

    2011-01-01

    The 2nd edition of Materials Chemistry builds on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field. The 2nd edition continues to offer innovative coverage and practical perspective throughout. After briefly defining materials chemistry and its history, seven chapters discuss solid-state chemistry, metals, semiconducting materials, organic "soft" materials, nanomaterials, and materials characterization. All chapters have been thoroughly updated and expanded with, for example, new sections on ‘soft lithographic’ patterning, ‘click chemistry’ polymerization, nanotoxicity, graphene, as well as many biomaterials applications. The polymer and ‘soft’ materials chapter represents the largest expansion for the 2nd edition. Each ch...

  15. Contrast Materials

    Science.gov (United States)

    ... is mixed with water before administration liquid paste tablet When iodine-based and barium-sulfate contrast materials ... for patients with kidney failure or allergies to MRI and/or computed tomography (CT) contrast material. Microbubble ...

  16. Dirac materials

    OpenAIRE

    Wehling, T. O.; Black-Schaffer, A. M.; Balatsky, A. V.

    2014-01-01

    A wide range of materials, like d-wave superconductors, graphene, and topological insulators, share a fundamental similarity: their low-energy fermionic excitations behave as massless Dirac particles rather than fermions obeying the usual Schrodinger Hamiltonian. This emergent behavior of Dirac fermions in condensed matter systems defines the unifying framework for a class of materials we call "Dirac materials''. In order to establish this class of materials, we illustrate how Dirac fermions ...

  17. Magnetic Materials

    Science.gov (United States)

    Spaldin, Nicola A.

    2003-04-01

    Magnetic materials are the foundation of multi-billion dollar industries and the focus of intensive research across many disciplines. This book covers the fundamentals, basic theories and applications of magnetism and conventional magnetic materials. Based on a lecture course given by Nicola Spaldin in the Materials Department at University of California, Santa Barbara, the book is ideal for a one- semester course in magnetic materials. It contains numerous homework problems and solutions.

  18. Composite materials

    International Nuclear Information System (INIS)

    Sambrook, D.J.

    1976-01-01

    A superconductor composite is described comprising at least one longitudinally extending superconductor filament or bundle of sub-filaments, each filament or bundle of sub-filaments being surrounded by and in good electrical contact with a matrix material, the matrix material comprising a plurality of longitudinally extending cells of a metal of high electrical conductivity surrounded by a material of lower electrical conductivity. The high electrical conductivity material surrounding the superconducting filament or bundle of sub-filaments is interrupted by a radially extending wall of the material of the lower electrical conductivity, the arrangement being such that at least two superconductor filaments or sub-filaments are circumferentially circumscribed by a single annulus of the material of high electrical conductivity. The annulus is electrically interrupted by a radially extending wall of the material of low electrical conductivity

  19. Arrowleaf Clover (Trifolium vesiculosum Savi: A New Species of Annual Legumes for High Rainfall Areas of the Mediterranean Climate Zone of Chile Trébol Vesiculoso (Trifolium vesiculosum Savi: Una Nueva Especie de Leguminosa Anual para Áreas de Alta Precipitación en la Zona Mediterránea de Chile

    Directory of Open Access Journals (Sweden)

    Carlos Ovalle M

    2010-03-01

    Full Text Available The present review examines the main attributes and agronomic characteristics of arrowleaf clover (Trifolium vesiculosum Savi and its incorporation into production systems in dryland areas of the Andean foothills of the humid Mediterranean climate zone of Chile. It is a new species of annual legume in Chile for light and medium textured soils. The root system can reach a depth of 1.5 m and its seeds have a high percentage of hardseedness (99.8%. It is an upright plant, with purplish-white flowers. The mature plant has large arrow-shaped leaves up to 50 mm long, often marked with a large white “V”. Dry matter and seed production in the Andean foothills is high (3.9-8.8 t DM ha-1 and 700-900 kg ha-1, respectively, surpassing the productivity of sub clover (Trifolium subterraneum L. cv. Mount Barker and crimson clover (Trifolium incarnatum L.. However, DM production in the second year was lower, possibly because the high percentage of hardseedness inhibited plant emergence. The phenological records and productive performance suggest that arrowleaf clover could contribute to improving pastoral production in dryland areas with annual rainfall levels of more than 800 mm, such as the Andean foothills in the central-southern region of Chile.En la presente revisión se examinan los principales atributos y características agronómicas del trébol vesiculoso (Trifolium vesiculosum Savi y su eventual incorporación a sistemas de producción en la precordillera andina de la zona de clima mediterráneo húmedo de Chile. Se trata de una nueva especie de leguminosa forrajera anual para suelos de textura liviana y media. El sistema radical puede alcanzar 1,5 m de profundidad y las semillas tienen un alto porcentaje de dureza seminal (99,8%. Es una planta de crecimiento erecto, flores de color blanco con una leve coloración púrpura. Las plantas adultas tienen grandes hojas con forma de flecha de más de 50 mm de largo, a menudo muestran una marca blanca en

  20. Precipitação média anual e vazão específica média de longa duração, na Bacia do São Francisco Specific yield discharge and mean precipitation in São Francisco Basin

    Directory of Open Access Journals (Sweden)

    Fernando F. Pruski

    2004-12-01

    Full Text Available O Rio São Francisco abrange uma área de drenagem da ordem de 640.000 km² e é responsável pela sustentabilidade de 503 municípios situados na bacia, onde vivem cerca de 14 milhões de pessoas. Neste trabalho analisou-se a variação da precipitação média anual e da vazão específica média de longa duração na Bacia do São Francisco. Foram analisados os dados hidrológicos de 178 estações pluviométricas e 77 estações fluviométricas, sendo a vazão específica média de longa duração obtida dividindo-se a vazão média anual pela área de drenagem da estação fluviométrica considerada e a precipitação média em cada área de drenagem, calculada pelo método do Polígono de Thiessen. Os resultados obtidos permitiram as seguintes conclusões: as precipitações diminuem da nascente para a foz do São Francisco, e as vazões específicas médias de longa duração diminuem ao longo do Rio São Francisco, sendo a máxima vazão específica igual a 22,61 L s-1 km-2, em Iguatama, primeira estação situada neste, e a mínima, igual a 4,22 L s-1 km-2, em Traipu, última estação desse rio.The São Francisco River drains an area of 640,000 km² and is responsible for the sustainability of the 503 municipalities in the basin where 14 million people live. This study was undertaken to investigate the mean precipitation and the specific yield discharge in the São Francisco Basin. The analysis was made considering 178 rain-gauge stations and 77 stations to measure stream flow. The specific yield discharge was obtained by dividing the mean annual discharge by the drainage area upstream from the station, and the mean precipitation in the upstream area from each station was obtained by the Thiessen polygon method. The results indicated that the mean precipitation decreased from the Upper São Francisco to Lower São Francisco, and the specific yield discharge decreases along the river, the maximum specific discharge was 22.6 L s-1 km-2

  1. Annual evolution of global, direct and diffuse radiation and fractions in tilted surfaces Evolução anual das radiações e fraç��es global, direta e difusa em superfícies inclinadas

    Directory of Open Access Journals (Sweden)

    Adilson P. de Souza

    2012-04-01

    Full Text Available It was evaluated the annual evolution of global, direct and diffuse components of incident solar radiation on tilted surfaces to 12.85, 22.85 and 32.85º, facing north, in Botucatu, state of São Paulo, Brazil. The radiometric fractions were obtained for each component of the radiation in the aforementioned surfaces, through the ratio with the global and top of the atmosphere radiations. Seasonality was evaluated based on monthly averages of daily values. The measures occurred between 04/1998 and 07/2001 at 22.85º; 08/2001 and 02/2003 at 12.85º; and from 03/2003 to 12/2007 at 32.85º, with concomitant measures in the horizontal surface (reference. The levels of global and direct radiation on tilted surfaces were lower in summer and higher in the equinoxes when compared with the horizontal. The diffuse radiation on tilted surfaces was lower in most months, with losses of up to 65%. A trend of increasing differences occurred between horizontal and tilted surfaces with the increase of the angle in all the components and fractions of incident radiation. The annual evolution of rainfall and cloud cover ratio directly affected the atmospheric transmissivity of direct and diffuse components in the region.Avaliou-se a evolução anual das componentes global, direta e difusa da radiação solar incidente em superfícies inclinadas a 12,85; 22,85 e 32,85º, com face voltada ao Norte, em Botucatu-SP. Foram obtidas frações radiométricas para cada componente da radiação nas superfícies supracitadas, através de razões com a radiação global e a do topo da atmosfera. A sazonalidade foi avaliada através das médias mensais dos valores diários. As medidas ocorreram entre 04/1998 e 07/2001, em 22,85º; 08/2001 e 02/2003, em 12,85º; e de 03/2003 a 12/2007, em 32,85º, com medidas concomitantes no plano horizontal (referência. Os níveis das radiações global e direta nos planos inclinados foram inferiores no período de verão e superiores entre os

  2. Aerospace materials and material technologies

    CERN Document Server

    Wanhill, R

    2017-01-01

    This book is a comprehensive compilation of chapters on materials (both established and evolving) and material technologies that are important for aerospace systems. It considers aerospace materials in three Parts. Part I covers Metallic Materials (Mg, Al, Al-Li, Ti, aero steels, Ni, intermetallics, bronzes and Nb alloys); Part II deals with Composites (GLARE, PMCs, CMCs and Carbon based CMCs); and Part III considers Special Materials. This compilation has ensured that no important aerospace material system is ignored. Emphasis is laid in each chapter on the underlying scientific principles as well as basic and fundamental mechanisms leading to processing, characterization, property evaluation and applications. A considerable amount of materials data is compiled and presented in appendices at the end of the book. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.

  3. Materials Discovery | Materials Science | NREL

    Science.gov (United States)

    Discovery Materials Discovery Images of red and yellow particles NREL's research in materials characterization of sample by incoming beam and measuring outgoing particles, with data being stored and analyzed Staff Scientist Dr. Zakutayev specializes in design of novel semiconductor materials for energy

  4. Nano Materials

    International Nuclear Information System (INIS)

    Jin, In Ju; Lee, Ik Mo; Kwon, Yeung Gu

    2006-02-01

    This book introduces background of nano science such as summary, plenty room at the bottom, access way to nano technique, nanoparticles using bottom-up method which are a marvel of nature, and modern alchemy : chemical synthesis of artificial nano structure, understanding of quantum mechanics, STM/AFM, nano metal powder, ceramic nanoparticles, nano structure film, manufacture of nanoparticles using reverse micelle method, carbon nano tube, sol-gel material, nano energy material, nano catalyst nano bio material technology and spintronics.

  5. Material Systems

    DEFF Research Database (Denmark)

    Jensen, Mads Brath; Mortensen, Henrik Rubæk; Mullins, Michael

    2009-01-01

    This paper describes and reflects upon the results of an investigative project which explores the setting up of a material system - a parametric and generative assembly consisting of and taking into consideration material properties, manufacturing constraints and geometric behavior. The project...... approaches the subject through the construction of a logic-driven system aiming to explore the possibilities of a material system that fulfills spatial, structural and performative requirements concurrently and how these are negotiated in situations where they might be conflicting....

  6. Material focus

    DEFF Research Database (Denmark)

    Sokoler, Tomas; Vallgårda, Anna K. A.

    2009-01-01

    In this paper we build on the notion of computational composites, which hold a material perspective on computational technology. We argue that a focus on the material aspects of the technology could be a fruitful approach to achieve new expressions and to gain a new view on the technology's role...... in design. We study two of the computer's material properties: computed causality and connectability and through developing two computational composites that utilize these properties we begin to explore their potential expressions....

  7. Materializing Ethnography

    OpenAIRE

    Geismar, H.; Horst, H. A.

    2004-01-01

    The articles in this volume were originally presented in a panel entitled ‘Material Methodologies’ at the American Anthropological Association meeting in New Orleans (November 2002). The panel was devised to tie together theoretical advances in the study of the material with the creative possibilities of fieldwork practices. Through detailed ethnographic discussion, we highlighted the ways in which a focus on a specifically material world enabled us to discover new perspecti...

  8. Materials characterisation

    International Nuclear Information System (INIS)

    Azali Muhammad

    2005-01-01

    Various nuclear techniques have been developed and employed by technologies and scientists worldwide to physically and chemically characterise the material particularly those that have applications in industry. These include small angle neutron scattering (SANS), x-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM) for the internal structural study of material, whereas, the x-ray fluorescence (XRF) for the chemical analysis, while the Moessbauer spectroscopy for the study on the magnetic properties and structural identity of material. Basic principle and instrumentations of the techniques are discussed in this chapter. Example of their applications in various disciplines particularly in characterisation of industrial materials also described

  9. New materials

    International Nuclear Information System (INIS)

    Joshi, S.K.; Rao, C.N.R.; Tsuruta, T.

    1992-01-01

    The book contains the state-of-the art lectures delivered at the discussion meeting on new materials, a field in which rapid advances are taking place. The main objective of the meeting was to bring active scientists in this area from Japan and India together. The topics covered diverse aspects of modern materials including high temperature superconducting compounds. (M.G.B.)

  10. Materials science

    International Nuclear Information System (INIS)

    2002-01-01

    the document is a collection of papers on different aspects of materials science. It discusses many items such as semiconductors, surface properties and interfaces, construction and civil engineering, metallic materials, polymers and composites, biology and biomaterials, metallurgy etc.. - 1 - Document1 Document1

  11. Material Programming

    DEFF Research Database (Denmark)

    Vallgårda, Anna; Boer, Laurens; Tsaknaki, Vasiliki

    2017-01-01

    . Consequently we ask what the practice of programming and giving form to such materials would be like? How would we be able to familiarize ourselves with the dynamics of these materials and their different combinations of cause and effect? Which tools would we need and what would they look like? Will we program......, and color, but additionally being capable of sensing, actuating, and computing. Indeed, computers will not be things in and by themselves, but embedded into the materials that make up our surroundings. This also means that the way we interact with computers and the way we program them, will change...... these computational composites through external computers and then transfer the code them, or will the programming happen closer to the materials? In this feature we outline a new research program that floats between imagined futures and the development of a material programming practice....

  12. Composite material

    Science.gov (United States)

    Hutchens, Stacy A [Knoxville, TN; Woodward, Jonathan [Solihull, GB; Evans, Barbara R [Oak Ridge, TN; O'Neill, Hugh M [Knoxville, TN

    2012-02-07

    A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

  13. Materials science

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    The Materials Science Division is engaged in research on physical properties of materials and the effects of radiation upon them. This involves solid state materials undergoing phase transitions, energy storing materials, and biomaterials. The Division also offers research facilities for M.S. and Ph.D. thesis work in the fields of physics, chemistry, materials, and radiation sciences in cooperation with the various colleges and departments of the UPR Mayaguez Campus. It is anticipated that it will serve as a catalyst in starting energy-related research programs in cooperation with UPR faculty, especially programs involving solar energy. To encourage and promote cooperative efforts, contact is maintained with former graduate students and with visiting scientists from Latin American research institutions

  14. Touching Materiality

    DEFF Research Database (Denmark)

    Rasmussen, Lisa Rosén

    2012-01-01

    Dripping ink pens, colourful paint on skin, vegetables pots on a school roof. In interviews with three generations of former school pupils, memories of material objects bore a relation to everyday school life in the past. Interwoven, these objects entered the memorising processes, taking...... the interviewer and interviewee beyond an exclusively linguistic understanding of memory. This article analyses how the shifting objects of materiality in personal and generational school memories connects to material as well as sensuous experiences of everyday school life and its complex processes of learning....... Drawing on anthropological writings, the article argues that the objects of materiality are part of important but non-verbalised memories of schooling. The Dutch philosopher Eelco Runia’s notions of presence and metonymy are incorporated as tools for approaching objects of materiality in memory studies....

  15. CTBTO Annual Report 2011 (Spanish Edition); CTBTO Informe Anual 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-06-15

    The Preparatory Commission in 2010 succeeded in taking further significant steps in fulfilment of its mandate and promotion of the Treaty and the buildup of the verification system. As the international support for the entry into force of the Treaty grew larger, Trinidad and Tobago and the Central African Republic ratified the Treaty, bringing the number of ratifications to 153. Among the States that have ratified are 35 of the 44 States listed in Annex 2 to the Treaty, whose ratification is required for it to enter into force. Also, Indonesia, Iraq, Guatemala, Papua New Guinea and Thailand expressed their commitment to ratify the Treaty. As of 31 December 2010, the CTBT had been signed by 182 States. While maintenance support and technical assistance continued to be provided at International Monitoring System (IMS) facilities around the globe, the momentum to complete the IMS network was maintained in 2010. Progress towards the completion of the IMS was made in all four technologies (seismic, hydroacoustic, infrasound and radionuclide). Four new stations were installed. Thus by the end of 2010, 272 IMS facilities were installed, representing 85% of the entire network. With 10 stations certified in 2010, the total number of certified IMS stations and laboratories, which was zero in early 2000, reached 264 at the end of the year. In addition, the first three noble gas systems were certified in 2010. This increase in the number of certified facilities has been a source of improvement for coverage and network resilience. The Provisional Technical Secretariat (PTS) of the Commission started the largest IMS station repair/ reconstruction so far in terms of financial investment at the joint site of hydroacoustic station HA3 and infrasound station IS14 in the Juan Fernandez Islands (Chile), which were partly destroyed by a tsunami in 2010. This multimillion dollar project, which entails substantial technical challenges, is planned to be completed in 2013. Infrasound monitoring, which is an important verification technology for detecting and locating an atmospheric nuclear explosion, was introduced into operations at the International Data Centre (IDC) in February 2010. During 2010, additional noble gas systems were transferred into IDC operations. At the end of the year, a total of 27 noble gas systems were in provisional operation at IMS radionuclide stations. Efforts were also made to further enhance the capabilities to perform atmospheric transport modelling and to deliver high quality products to States Signatories. Now, atmospheric backtracking calculations are performed daily for each of the IMS radionuclide stations with near real time meteorological data obtained from the European Centre for Medium-Range Weather Forecasts. The state of health system was deployed in the IDC Operations Centre. The system software facilitates the tasks of monitoring and detecting incidents and problems in the IMS network (stations, links in the Global Communications Infrastructure, servers, databases, hardware, software, etc.). Also, IDC application software was converted and updated to run on open source systems. In 2009, an on-site inspection (OSI) action plan, resulting from the review and follow-up of the lessons learned from the 2008 Integrated Field Exercise (IFE), was prepared. This was further developed to provide a framework for furthering the OSI regime in a project oriented manner. The action plan outlines various projects in five main areas of development, namely policy planning and operations, operations support and logistics, techniques and equipment, training, and procedures and documentation. The projects are intended to steer the build-up of OSI operational capability and assist in the preparation and conduct of the next IFE. OSI policies and operational procedures were developed further and advances were made in, inter alia, the implementation of an Integrated Inspection Support System. Training focused on the preparations for the second training cycle for surrogate inspectors, based on thorough analysis of training needs after the 2008 IFE. In this context, a series of training planning meetings were held which brought together the various stakeholders in OSI training. A major event in 2010 related to OSI methodology development was directed exercise DE10, which was devoted to ground based visual observation and OSI communication and conducted in the area of the Dead Sea in Jordan. The Commission also launched a new capacity development initiative that aims to build the necessary capacity in States Signatories to effectively meet political, legal, technical and scientific challenges that face the Treaty and its verification regime. As part of this initiative, it has started to develop a series of introductory as well as enhanced courses dealing with various aspects of the Treaty and the verification regime. The Commission continued to streamline its activities and to promote synergies and efficiencies. It also fostered results based management, accountability and oversight. To finance the reconstruction of IMS stations HA3 and IS14 and the implementation of an Enterprise Resource Planning system which is compliant with International Public Sector Accounting Standards, the Commission appropriated US$23.9 million. It also approved the creation of 10 additional new posts at the PTS in order to enhance the capacity of the PTS to fulfil its growing responsibilities. These achievements certainly promise stronger support for the work of the Commission in 2011.

  16. El crecimiento de cuatro plantas ornamentales anuales en diferentes sustratos.

    Directory of Open Access Journals (Sweden)

    Adalberto Di Benedetto

    2003-06-01

    Full Text Available Usando un sustrato base compuesto por turba de Sphagnum, perlita y vermiculita (Sustrato Van Leeuwen®, se evaluaron las siguientes mezclas de cultivo: (1 Sustrato Van Leeuwen® (100%; (2 Suelo (100%; (3 Suelo (50%; (4 Resaca de río (100% y (5 Resaca de río (50%. Se encontró una disminución de la porosidad total durante las primeras semanas de cultivo y un aumento, que no llegó a compensar la caída inicial, durante las fases finales de crecimiento para las cuatro plantas utilizadas en todas las mezclas evaluadas. De las cuatro plantas estudiadas: Begonia x semperflorens (“flor de azúcar”, Gerbera x jamensonii, Impatiens x walleriana (“alegría del hogar” y Viola x wittrockiana (“pensamiento”, todas presentaron una curva de crecimiento típica en función del tiempo con variaciones significativas entre las cinco mezclas de crecimiento utilizadas. Nuestros resultados indican que la resaca de río podría ser una alternativa potencial para la sustitución parcial o total de la turba de Sphagnum aunque la proporción exacta se halla asociada con los requerimientos de cada planta en particular.

  17. El crecimiento de cuatro plantas ornamentales anuales en diferentes sustratos.

    OpenAIRE

    Adalberto Di Benedetto; Carlos Boschi; Rolando Klasman y Jorge Molinari

    2003-01-01

    Usando un sustrato base compuesto por turba de Sphagnum, perlita y vermiculita (Sustrato Van Leeuwen®), se evaluaron las siguientes mezclas de cultivo: (1) Sustrato Van Leeuwen® (100%); (2) Suelo (100%); (3) Suelo (50%); (4) Resaca de río (100%) y (5) Resaca de río (50%). Se encontró una disminución de la porosidad total durante las primeras semanas de cultivo y un aumento, que no llegó a compensar la caída inicial, durante las fases finales de crecimiento para las cuatro plantas utilizadas e...

  18. CTBTO Annual Report 2011 (Spanish Edition); CTBTO Informe Anual 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-06-15

    Despite various challenges, the Preparatory Commission in 2011 managed to build on its efforts in promoting the Treaty and expanding the capabilities of its verification regime. The Commission continued to enjoy strong political support and registered notable progress in universalization of the Treaty. With ratification of the Treaty by Ghana and Guinea, the number of ratifying States reached 155. The approval of the ratification of the Treaty by the Parliament of Indonesia in December 2011 was another key development that received worldwide media attention. In 2011, as a result of coordinated efforts of the States hosting facilities of the International Monitoring System (IMS), local operators, States Signatories and the Provisional Technical Secretariat (PTS), further progress was made in expanding the coverage and data availability in all IMS technologies. The number of certified IMS stations and radionuclide laboratories reached 270, representing 80% of the total foreseen by the Treaty. The number of certified IMS noble gas systems increased to 8, which is 20% of the planned network. Moreover, with the certification of an auxiliary seismic station in Bangladesh (AS7), the number of such stations reached 100. This achievement marks an increase in the data available from the verification regime, especially from radionuclide and auxiliary seismic stations. The major project to repair IMS hydroacoustic station HA3 and infrasound station IS14 (Chile), which were destroyed by a tsunami in 2010, continued to proceed well. The procurement process for HA3 was started. Efforts were being made to return IS14 to full operation in 2012. The PTS succeeded in further consolidating infrasound and noble gas systems into the operations of the International Data Centre (IDC). At the end of the year, 47 infrasound and 8 noble gas systems were in provisional operation. Efforts were also made to further enhance the atmospheric transport modelling capabilities and to continue delivering high quality products to States Signatories. Atmospheric backtracking calculations are performed daily for each of the IMS radionuclide stations with near real time meteorological data obtained from the European Centre for Medium-Range Weather Forecasts. The state of health system deployed in the IDC Operations Centre was developed further. In addition, a wide range of activities were focused on IDC software development. The Fukushima nuclear accident presented an unexpected major challenge to the Commission. Over and above its regular activities, it took exceptional measures to ensure data collection from its IMS facilities and processing of the data to produce various high quality products, which had to be analysed and provided to States Signatories and international organizations in the shortest possible time. The Commission also served as a reliable source of information for the public and the media. The performance of the verification regime was beyond expectations. It proved its capabilities and demonstrated its vast potential in verification as well as in the support of early warning and disaster management systems. In this regard, important lessons were drawn that are being used for further improvement in equipment development, atmospheric transport modelling, seismic monitoring, radionuclide monitoring, health and safety procedures and the delivery of data and products to users. Promoting the operational capabilities of the organization in the area of on-site inspection (OSI) was a major priority in 2011. Further progress was made on a range of equipment related issues. These included the definition of the technical specifications and draft list of equipment to be used during the initial period of an OSI. The second cycle of OSI training continued as planned. Over fifty participants from 43 States Signatories attended an advanced course, which included a four day field exercise in Hungary. As part of the training cycle, two tabletop exercises were conducted for the groups in the inspection team responsible for radionuclide monitoring and the application of continuation period techniques. In addition, several OSI technical expert meetings were organized. The meeting addressed communications, use of a geographical information system and noble gas monitoring technology for OSI purposes. They also covered multispectral and infrared imaging, as well as active seismic survey techniques and drilling. An OSI Equipment Storage and Maintenance Facility in a warehouse near Vienna was inaugurated in March 2011. The facility was used for a number of training courses, tabletop exercises, expert meetings, equipment demonstrations and technical visits by delegations from States Signatories. The 'Science and Technology 2011' conference, held in Vienna in June, was a major initiative to foster further interaction with the scientific community and to seek cost effective technological improvements. The conference was attended by around seven hundred and fifty scientists, experts and government officials from over one hundred countries, and nearly three hundred oral and poster presentations were given. Discussions were organized around five themes: the earth as a complex system; understanding the nuclear explosion source; advances in sensors, networks and observational technologies; advances in computing, processing and visualization for verification applications; and creating knowledge through partnerships, training and information/communication technology. The Commission continued to expand its Capacity Development Initiative, whose aim is to build the necessary capacity in States Signatories so that they can more effectively meet their Treaty obligations and contribute to the verification regime.

  19. Anual Report of Groundwater Monitoring at Centralia, Kansas, in 2015

    Energy Technology Data Exchange (ETDEWEB)

    LaFreniere, Lorraine M. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-10-01

    The KDHE (2012) agreed to annual sampling at all locations, beginning with the 2013 monitoring documented previously (Argonne 2014a). This present report documents the results of the annual sampling of the approved monitoring well network on September 27-30, 2015.

  20. Annual statistical information 1996; Informe estatistico anual 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This annual statistical report aims to propagate the information about the generation, transmission and distribution systems evolution and about the electric power market from the Parana State, Brazil, in 1996. The electric power consumption in the distribution area of the Parana Power Company (COPEL) presented a growth about 6,7%. The electric power production in the the COPEL plants increased 42,2% higher than 1995, due to the outflows verified in the Iguacu river and to the long period of the affluence reduction that the Southern region tanks coursed during this year. This report presents statistical data about the following topics: a) electric power energy balance from the Parana State; b) electric power energy balance from the COPEL - own generation, certain interchange, electric power requirement, direct distribution and the electric system 6 graphs, 3 maps, 61 tabs.; e-mail: splcnmr at mail.copel.br

  1. Nuclear materials

    International Nuclear Information System (INIS)

    1996-01-01

    In 1998, Nuclear Regulatory Authority of the Slovak Republic (NRA SR) performed 38 inspections, 25 of them were performed in co-operation with IAEA inspectors. There is no fresh nuclear fuel at Bohunice A-1 NPP at present. Fresh fuel of Bohunice V-1 and V-2 NPPs is inspected in the fresh fuel storage.There are 327 fresh fuel assemblies in Mochovce NPP fresh fuel storage. In addition to that, are also 71 small users of nuclear materials in Slovakia. In most cases they use: covers made of depleted uranium for non-destructive works, detection of level in production plants, covers for therapeutical sources at medical facilities. In. 1995, NRA SR issued 4 new licences for nuclear material withdrawal. In the next part manipulation with nuclear materials, spent fuel stores and illegal trafficking in nuclear materials are reported

  2. Composite Materials

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    This book deals with the mechanical and physical behavior of composites as influenced by composite geometry. "Composite Materials" provides a comprehensive introduction for researchers and students to modern composite materials research with a special emphasis on the significance of phase geometry......, viscoelastic behavior, and internal stress states. Other physical properties considered are thermal and electrical conductivities, diffusion coefficients, dielectric constants and magnetic permeability. Special attention is given to the effect of pore shape on the mechanical and physical behavior of porous....... The book enables the reader to a better understanding of the behavior of natural composites, improvement of such materials, and design of new materials with prescribed properties. A number of examples are presented: Special composite properties considered are stiffness, shrinkage, hygro-thermal behavior...

  3. Hazardous materials

    Science.gov (United States)

    ... substances that could harm human health or the environment. Hazardous means dangerous, so these materials must be ... M. is also a founding member of Hi-Ethics and subscribes to the principles of the Health ...

  4. Utopian Materialities

    DEFF Research Database (Denmark)

    Elgaard-Jensen, Torben

    2004-01-01

    In various ways, this paper makes the counter-intuitive claim that the utopian and the material are thoroughlyinterdependent, rather than worlds apart. First, through a reading of Thomas More's Utopia, it is argued thatUtopia is the product of particular kinds of relations, rather than merely...... a detachment from the known world.Second, the utopianism of a new economy firm is examined. It is argued that the physical set-up of the firm -in particular the distribution of tables and chairs - evoke a number of alternatives to ordinary work practice.In this way the materialities of the firm are crucial...... to its persuasive image of being the office of the future.The notion that utopia is achieved through material arrangements is finally related to the analysis of facts andfictions in ANT. It is argued, that even though Utopias are neither fact nor fiction, they are both material andeffective...

  5. Propulsion materials

    Energy Technology Data Exchange (ETDEWEB)

    Wall, Edward J. [U.S. Dept. of Energy, Washington, D.C. (United States); Sullivan, Rogelio A. [U.S. Dept. of Energy, Washington, D.C. (United States); Gibbs, Jerry L. [U.S. Dept. of Energy, Washington, D.C. (United States)

    2008-01-01

    The Department of Energy’s (DOE’s) Office of Vehicle Technologies (OVT) is pleased to introduce the FY 2007 Annual Progress Report for the Propulsion Materials Research and Development Program. Together with DOE national laboratories and in partnership with private industry and universities across the United States, the program continues to engage in research and development (R&D) that provides enabling materials technology for fuel-efficient and environmentally friendly commercial and passenger vehicles.

  6. Encountering Materiality

    DEFF Research Database (Denmark)

    Svabo, Connie

    2016-01-01

    DHT researcher Connie Svabo and artist Charlotte Grum did a joint performance presentation titled Becoming Sheep, Becoming Animal at the international conference Encountering Materiality – Transdisciplinary Conversations, held in Geneve, Schwitzerland, June 23-25 2016.......DHT researcher Connie Svabo and artist Charlotte Grum did a joint performance presentation titled Becoming Sheep, Becoming Animal at the international conference Encountering Materiality – Transdisciplinary Conversations, held in Geneve, Schwitzerland, June 23-25 2016....

  7. Background Material

    DEFF Research Database (Denmark)

    Zandersen, Marianne; Hyytiäinen, Kari; Saraiva, Sofia

    This document serves as a background material to the BONUS Pilot Scenario Workshop, which aims to develop harmonised regional storylines of socio-ecological futures in the Baltic Sea region in a collaborative effort together with other BONUS projects and stakeholders.......This document serves as a background material to the BONUS Pilot Scenario Workshop, which aims to develop harmonised regional storylines of socio-ecological futures in the Baltic Sea region in a collaborative effort together with other BONUS projects and stakeholders....

  8. Sistema de integração lavoura-pecuária: efeito do manejo da altura em pastagem de aveia preta e azevém anual sobre o rendimento da cultura da soja Crop-livestock integration system: effect of oat and italian ryegrass sward height management on soybean yield

    Directory of Open Access Journals (Sweden)

    Marília Lazzarotto Terra Lopes

    2009-08-01

    Full Text Available O objetivo deste trabalho foi avaliar os efeitos da altura de manejo em pastagem de aveia preta e azevém anual sobre o estabelecimento e o rendimento de grãos da cultura de soja. Os tratamentos utilizados foram quatro alturas de manejo do pasto: 10, 20, 30 e 40cm e um tratamento sem pastejo. Foram avaliados atributos referentes à pastagem (altura do pasto, oferta de forragem, massa de forragem, taxa de acúmulo, taxa de lotação animal e palhada residual e à cultura da soja (estande inicial de plantas e rendimento de grãos. As alturas reais do pasto ficaram próximas daquelas pretendidas, havendo um aumento linear da oferta de forragem e da massa de forragem quando foi observado aumento das alturas de manejo do pasto. A taxa de acúmulo não foi afetada pelos tratamentos. A taxa de lotação apresentou resposta linear decrescente com o aumento da altura do pasto. A massa de forragem remanescente aumentou na medida em que houve incremento na altura de manejo do pasto. Foi observada diferença entre os tratamentos para palhada residual e estande inicial de plantas de soja, porém essas diferenças não afetaram o rendimento de grãos da cultura. Os resultados sugerem que a presença dos animais não prejudica o cultivo subsequente, possibilitando aumento da renda do produtor pela oportunidade de utilização das áreas durante a entressafra da soja.This trial aimed to evaluate the effects of sward height management of pastures composed by black oat and Italian ryegrass upon soybean establishment and yield. The treatments were four sward management heights: 10, 20, 30 and 40cm; and no grazing control. Pasture (sward height, herbage allowance, herbage mass, stocking rate and post grazing herbage mass and soybean (initial stand of plants and yield attributes were evaluated. The observed sward heights were very similar to those previously intended. There was a linear increase in herbage allowance and herbage mass with increasing sward height

  9. Modelagem estatística da precipitação mensal e anual e no período seco para o estado de Minas Gerais Statistical modeling of monthly, annual and dry season mean precipitation for the State of Minas Gerais

    Directory of Open Access Journals (Sweden)

    Carlos R. de Mello

    2009-02-01

    Full Text Available Objetivou-se, com o presente estudo, ajustar modelos lineares para predição da precipitação média mensal (no período úmido e anual e no período seco, baseados nas coordenadas geográficas (latitude e longitude e altitude para o Estado de Minas Gerais. Aplicaram-se dados diários de precipitação, provenientes da Agência Nacional de Águas (ANA de 209 estações meteorológicas, das quais 197 foram usadas para ajuste dos modelos e 12 para sua validação final. O coeficiente de determinação ajustado (r², o erro médio absoluto (%, a tendência das estimativas (% e significância dos parâmetros, foram considerados na avaliação dos modelos. De maneira geral, os modelos apresentaram bons parâmetros estatísticos de validação, com r² maior que 0,70, erro médio menor que 10% e tendência não significativa (This study aimed at adjusting statistical linear models for prediction of total mean precipitation associated to monthly (in the wet season, annual and dry season periods, based on geographical coordinates (latitude and longitude and altitude for the State of Minas Gerais, Brazil. Daily precipitation data from the "Agência Nacional de Águas" (ANA for 209 pluviometric stations were applied, 197 for modeling adjustment and 12 for final validation. Coefficient of determination adjusted (r², mean absolute error (%, prediction bias (% and estimated parameters significance were considered for evaluation of models. The monthly and annual precipitation models presented good statistical validation coefficients, with r² greater than 0.70, mean error smaller than 10% and bias not significant (< 2% in relation to mean value. However, the dry season model presented an overestimation of precipitation, showing that more variables associated to topographic characteristics would be necessary to produce a more accurate model. Nevertheless, the adjusted models present good conditions for practical applications, forming an important tool for

  10. Comportamento agronômico de populações de azevém anual (Lolium multiflorum L. para cultivo invernal na região sudeste Agronomic behaviour of annual ryegrass (Lolium multiflorum L. populations for winter cropping in Southeast Region of Brazil

    Directory of Open Access Journals (Sweden)

    Antonio Vander Pereira

    2008-04-01

    Full Text Available Na Região Sudeste o período do inverno é caracterizado pela escassez e perda de qualidade das pastagens, sendo o azevém anual uma das forrageiras invernais mais recomendadas para suplementação da dieta dos rebanhos leiteiros nesta época do ano. Com este trabalho, buscou-se avaliar o comportamento de populações de azevém resultantes de coleta de germoplasma. Foram avaliadas 30 populações, sendo 22 resultantes de coletas recentes realizadas na Região Sul e oito pertencentes à coleção da Embrapa. Foi utilizado o delineamento experimental de blocos ao acaso com três repetições, sendo realizados sete cortes. Foram avaliados: altura da planta, porcentagem e produção de matéria seca, rebrota, número de dias até o florescimento e produção de sementes. Observou-se variação entre as populações para todas as características avaliadas. A estimativa da produção total de matéria seca variou de 3654 kg/ha (população LE 284 a 8544 kg/ha (CNPGL 164. Os resultados demonstraram elevado potencial de produção de forragem entre as populações de azevém coletadas, sendo que algumas delas podem ser recomendadas para cultivo invernal na Região Sudeste.In the Southeast Region of Brazil, the winter season is characterized by poor quality and low availability of the pastures. In that region the annual ryegrass is one of the most recommended winter forage to be used for dairy cattle diets. The objective of this study was to evaluate the behavior of ryegrass populations under the Mata Atlantica environment. From the 30 evaluated populations, 22 were collected and eight belong to Embrapa's collection. A randomized blocks design with three replications was used, and seven cuts were done. Plant height, percent and dry matter production, regrowth, days to flowering and seed production were recorded. For all these parameters there were differences between populations. Total dry matter production varied from 3654 kg/ha (LE 284 to 8544 kg

  11. Incidência cumulativa anual de doenças musculoesqueléticas incapacitantes relacionadas ao trabalho em uma área urbana do Brasil Cumulative annual incidence of disabling work-related musculoskeletal disorders in an urban area of Brazil

    Directory of Open Access Journals (Sweden)

    Norma Suely Souto Souza

    2011-11-01

    Full Text Available Estimou-se a incidência cumulativa anual (ICA das doenças musculoesqueléticas incapacitantes que acometem a região cervical e/ou membros superiores (DMEMS relacionadas ao trabalho, entre trabalhadores do Regime Geral da Previdência Social (RGPS de Salvador, Bahia, Brasil. Trabalhadores que receberam benefícios por incapacidade temporária por DMEMS relacionadas ao trabalho foram considerados casos, em 2008. Os dados provêm dos sistemas administrativos do Instituto Nacional do Seguro Social (INSS e do Ministério do Trabalho e Emprego (MTE. A ICA foi de 15 por dez mil trabalhadores. Mulheres, os de menor renda e aqueles que trabalhavam no ramo de atividades financeiras e indústria de transformação tinham maior ICA-DMEMS do que os seus referentes. Mulheres com o menor rendimento (um salário mínimo: R$ 415,00 tiveram a maior ICA-DMEMS, de 123 casos por dez mil. Isso sugere desigualdade na ocorrência dessas enfermidades, indicando a necessidade de priorizar não só ações de prevenção, com foco na ergonomia e organização do trabalho, como também o diagnóstico precoce, tratamento e reabilitação profissional.This study focused on the annual cumulative incidence (ACI of disabling work-related musculoskeletal disorders affecting the neck and/or upper limbs (ULMSD among workers covered by the National Social Insurance System in the city of Salvador, Bahia State, Brazil. Cases were workers who received disability compensation benefits when unable to work due to ULMSD, during the year 2008. The data were obtained from the administrative systems of the National Social Insurance Institute and Ministry of Labor and Employment. ACI was 15 per 10,000 workers. Increased ACI of ULMSD was associated with female gender, lower income, and work in financial activities or manufacturing. Women earning the minimum wage (US$ 64.00 per month or less had the highest ACI of ULMSD (123 per 10,000, suggesting inequalities in the occurrence of these

  12. Layered materials

    Science.gov (United States)

    Johnson, David; Clarke, Simon; Wiley, John; Koumoto, Kunihito

    2014-06-01

    Layered compounds, materials with a large anisotropy to their bonding, electrical and/or magnetic properties, have been important in the development of solid state chemistry, physics and engineering applications. Layered materials were the initial test bed where chemists developed intercalation chemistry that evolved into the field of topochemical reactions where researchers are able to perform sequential steps to arrive at kinetically stable products that cannot be directly prepared by other approaches. Physicists have used layered compounds to discover and understand novel phenomena made more apparent through reduced dimensionality. The discovery of charge and spin density waves and more recently the remarkable discovery in condensed matter physics of the two-dimensional topological insulating state were discovered in two-dimensional materials. The understanding developed in two-dimensional materials enabled subsequent extension of these and other phenomena into three-dimensional materials. Layered compounds have also been used in many technologies as engineers and scientists used their unique properties to solve challenging technical problems (low temperature ion conduction for batteries, easy shear planes for lubrication in vacuum, edge decorated catalyst sites for catalytic removal of sulfur from oil, etc). The articles that are published in this issue provide an excellent overview of the spectrum of activities that are being pursued, as well as an introduction to some of the most established achievements in the field. Clusters of papers discussing thermoelectric properties, electronic structure and transport properties, growth of single two-dimensional layers, intercalation and more extensive topochemical reactions and the interleaving of two structures to form new materials highlight the breadth of current research in this area. These papers will hopefully serve as a useful guideline for the interested reader to different important aspects in this field and

  13. Electronic materials

    CERN Document Server

    Kwok, H L

    2010-01-01

    The electronic properties of solids have become of increasing importance in the age of information technology. The study of solids and materials, while having originated from the disciplines of physics and chemistry, has evolved independently over the past few decades. The classical treatment of solid-state physics, which emphasized classifications, theories and fundamental physical principles, is no longer able to bridge the gap between materials advances and applications. In particular, the more recent developments in device physics and technology have not necessarily been driven by new conc

  14. Supplementary Material

    Indian Academy of Sciences (India)

    mraga

    1. Supplementary Material. A soluble-lead Redox Flow Battery with corrugated graphite sheet and reticulated vitreous carbon as positive and negative current collectors by A Banerjee et al (pp 163-. 170). Figure S1. SEM images for bare substrates: (a) graphite sheet, (b) 20 ppi RVC, (c) 30 ppi. RVC and (d) 45 ppi RVC.

  15. Emerging Materiality

    DEFF Research Database (Denmark)

    Bertelsen, Olav Wedege; Breinbjerg, Morten; Pold, Søren

    2009-01-01

    The authors examine how materiality emerges from complex chains of mediation in creative software use. The primarily theoretical argument is inspired and illustrated by interviews with two composers of electronic music. The authors argue that computer mediated activity should not primarily be und...

  16. Atmospheric materiality

    DEFF Research Database (Denmark)

    Wieczorek, Izabela

    2016-01-01

    experience and, consequently, to the conceptual and methodological shifts in the production of space, and hence in the way we think about materiality. In this context, architectural space is understood as a contingent construction – a space of engagement that appears to us as a result of continuous...

  17. Absorbant materials

    International Nuclear Information System (INIS)

    Quetier, Monique.

    1978-11-01

    Absorbants play a very important part in the nuclear industry. They serve for the control, shut-down and neutron shielding of reactors and increase the capacity of spent fuel storage pools and of special transport containers. This paper surveys the usual absorbant materials, means of obtainment, their essential characteristics relating to their use and their behaviour under neutron irradiation [fr

  18. Friction Material Composites Materials Perspective

    CERN Document Server

    Sundarkrishnaa, K L

    2012-01-01

    Friction Material Composites is the first of the five volumes which strongly educates and updates engineers and other professionals in braking industries, research and test labs. It explains besides the formulation of design processes and its complete manufacturing input. This book gives an idea of mechanisms of friction and how to control them by designing .The book is  useful for designers  of automotive, rail and aero industries for designing the brake systems effectively with the integration of friction material composite design which is critical. It clearly  emphasizes the driving  safety and how serious designers should  select the design input. The significance of friction material component like brake pad or a liner as an integral part of the brake system of vehicles is explained. AFM pictures at nanolevel illustrate broadly the explanations given.

  19. Materials Science

    Science.gov (United States)

    2003-01-01

    The Materials Science Program is structured so that NASA s headquarters is responsible for the program content and selection, through the Enterprise Scientist, and MSFC provides for implementation of ground and flight programs with a Discipline Scientist and Discipline Manager. The Discipline Working Group of eminent scientists from outside of NASA acts in an advisory capacity and writes the Discipline Document from which the NRA content is derived. The program is reviewed approximately every three years by groups such as the Committee on Microgravity Research, the National Materials Advisory Board, and the OBPR Maximization and Prioritization (ReMaP) Task Force. The flight program has had as many as twenty-six principal investigators (PIs) in flight or flight definition stage, with the numbers of PIs in the future dependent on the results of the ReMaP Task Force and internal reviews. Each project has a NASA-appointed Project Scientist, considered a half-time job, who assists the PI in understanding and preparing for internal reviews such as the Science Concept Review and Requirements Definition Review. The Project Scientist also insures that the PI gets the maximum science support from MSFC, represents the PI to the MSFC community, and collaborates with the Project Manager to insure the project is well-supported and remains vital. Currently available flight equipment includes the Materials Science Research Rack (MSRR-1) and Microgravity Science Glovebox. Ground based projects fall into one or more of several categories. Intellectual Underpinning of Flight Program projects include theoretical studies backed by modeling and computer simulations; bring to maturity new research, often by young researchers, and may include preliminary short duration low gravity experiments in the KC-135 aircraft or drop tube; enable characterization of data sets from previous flights; and provide thermophysical property determinations to aid PIs. Radiation Shielding and preliminary In

  20. Magnetocaloric materials

    Energy Technology Data Exchange (ETDEWEB)

    Jeppesen, Stinus

    2008-10-15

    New and improved magnetocaloric materials are one of the cornerstones in the development of room temperature magnetic refrigeration. Magnetic refrigeration has been used since the 1930ies in cryogenic applications, but has since the discovery of room temperature refrigerants received enormous attention. This Ph.D. work has been mainly concerned with developing a new technique to characterize the magnetocaloric effect (MCE) and using this technique in the investigations on new and improved magnetocaloric materials. For this purpose a novel differential scanning calorimeter (DSC) with applied magnetic fields was developed for measuring heat capacity as function of magnetic field. Measurements using the developed DSC demonstrate a very high sensitivity, fast measurements and good agreement with results obtained by other techniques. Furthermore, two material systems have been described in this work. Both systems take basis in the mixed-valence manganite system La{sub 1-x}Ca{sub x}MnO{sub 3} well known from research on colossal magnetoresistance (CMR). The mixed-valence manganite crystallizes in the perovskite structure of general formula ABO{sub 3}. The first material system is designed to investigate the influence of low level Cu doping on the B-site. Six different samples were prepared with over-stoichiometric compositions La{sub 0.67}Ca{sub 0.33}Mn{sub 1.05}Cu{sub x}O{sub 3}, x=0, 1, 2, 3, 4 and 5%. All compositions crystallized well in the same perovskite structure, but the morphology of the samples changed drastically with doping. Investigation on the magnetocaloric properties revealed that small levels of Cu up to around 3% could improve the magnetocaloric performance of the materials. Furthermore, Cu could be used to tune the temperature interval without deteriorating the MCE, which is a much desired characteristic for potential use in magnetic refrigerators. A less comprehensive part of the work has been concerned with the investigation of doping on the A

  1. Materializing Superghosts

    OpenAIRE

    Alexandrov, Victor; Krotov, Dmitry; Losev, Andrei; Lysov, Vyacheslav

    2007-01-01

    We construct the off-shell BV realization of N=1, d=10 SYM with 7 auxillary fields. This becomes possible due to materialized ghost phenomenon. Namely, supersymmetry ghosts are coordinates on a manifold B of 10-dimensional spinors with pure spinors cut out. Auxillary fields are sections of a bundle over B, and supersymmetry transformations are nonlinear in ghosts. By integrating out axillary fields we obtain on-shell supersymmetric BV action with terms quadratic in antifields. Exactly this on...

  2. Material monitoring

    International Nuclear Information System (INIS)

    Kotter, W.; Zirker, L.; Hancock, J.A.

    1995-01-01

    Waste Reduction Operations Complex (WROC) facilities are located at the Idaho National Engineering Laboratory (INEL). The overall goal for the Pollution Prevention/Waste Minimization Unit is to identify and establish the correct amount of waste generated so that it can be reduced. Quarterly, the INEL Pollution Prevention (P2) Unit compares the projected amount of waste generated per process with the actual amount generated. Examples of waste streams that would be addresses for our facility would include be are not limited to: Maintenance, Upgrades, Office and Scrap Metal. There are three potential sources of this variance: inaccurate identification of those who generate the waste; inaccurate identification of the process that generates the waste; and inaccurate measurement of the actual amount generated. The Materials Monitoring Program was proposed to identify the sources of variance and reduce the variance to an acceptable level. Prior to the implementation of the Material Monitoring Program, all information that was gathered and recorded was done so through an informal estimation of waste generated by various personnel concerned with each processes. Due to the inaccuracy of the prior information gathering system, the Material Monitoring Program was established. The heart of this program consists of two main parts. In the first part potential waste generators provide information on projected waste generation process. In the second part, Maintenance, Office, Scrap Metal and Facility Upgrade wastes from given processes is disposed within the appropriate bin dedicated to that process. The Material Monitoring Program allows for the more accurate gathering of information on the various waste types that are being generated quarterly

  3. Thermoelectric Materials

    Science.gov (United States)

    Gao, Peng; Berkun, Isil; Schmidt, Robert D.; Luzenski, Matthew F.; Lu, Xu; Bordon Sarac, Patricia; Case, Eldon D.; Hogan, Timothy P.

    2014-06-01

    Mg2(Si,Sn) compounds are promising candidate low-cost, lightweight, nontoxic thermoelectric materials made from abundant elements and are suited for power generation applications in the intermediate temperature range of 600 K to 800 K. Knowledge on the transport and mechanical properties of Mg2(Si,Sn) compounds is essential to the design of Mg2(Si,Sn)-based thermoelectric devices. In this work, such materials were synthesized using the molten-salt sealing method and were powder processed, followed by pulsed electric sintering densification. A set of Mg2.08Si0.4- x Sn0.6Sb x (0 ≤ x ≤ 0.072) compounds were investigated, and a peak ZT of 1.50 was obtained at 716 K in Mg2.08Si0.364Sn0.6Sb0.036. The high ZT is attributed to a high electrical conductivity in these samples, possibly caused by a magnesium deficiency in the final product. The mechanical response of the material to stresses is a function of the elastic moduli. The temperature-dependent Young's modulus, shear modulus, bulk modulus, Poisson's ratio, acoustic wave speeds, and acoustic Debye temperature of the undoped Mg2(Si,Sn) compounds were measured using resonant ultrasound spectroscopy from 295 K to 603 K. In addition, the hardness and fracture toughness were measured at room temperature.

  4. Energy of the future: final report; Energias do futuro: relatorio final

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This report presents the analysis of the main factors that may restrict the future energy demand and preferences for technology choices and types of fuels. The work is based on a literature review on the state of the art of leading energy technologies. In addition, information is gathered to assist the characterization of amounts and forms of energy that will be important in the period 2030-2050, as well as major consuming sectors. At the end of a presentation is made a summary diagram that indicates the degree of effort in R and D that may be necessary taking into consideration the state of the art technologies, an array of challenges and demand and future energy matrix.

  5. FOREWORD: Materials metrology Materials metrology

    Science.gov (United States)

    Bennett, Seton; Valdés, Joaquin

    2010-04-01

    It seems that so much of modern life is defined by the materials we use. From aircraft to architecture, from cars to communications, from microelectronics to medicine, the development of new materials and the innovative application of existing ones have underpinned the technological advances that have transformed the way we live, work and play. Recognizing the need for a sound technical basis for drafting codes of practice and specifications for advanced materials, the governments of countries of the Economic Summit (G7) and the European Commission signed a Memorandum of Understanding in 1982 to establish the Versailles Project on Advanced Materials and Standards (VAMAS). This project supports international trade by enabling scientific collaboration as a precursor to the drafting of standards. The VAMAS participants recognized the importance of agreeing a reliable, universally accepted basis for the traceability of the measurements on which standards depend for their preparation and implementation. Seeing the need to involve the wider metrology community, VAMAS approached the Comité International des Poids et Mesures (CIPM). Following discussions with NMI Directors and a workshop at the BIPM in February 2005, the CIPM decided to establish an ad hoc Working Group on the metrology applicable to the measurement of material properties. The Working Group presented its conclusions to the CIPM in October 2007 and published its final report in 2008, leading to the signature of a Memorandum of Understanding between VAMAS and the BIPM. This MoU recognizes the work that is already going on in VAMAS as well as in the Consultative Committees of the CIPM and establishes a framework for an ongoing dialogue on issues of materials metrology. The question of what is meant by traceability in the metrology of the properties of materials is particularly vexed when the measurement results depend on a specified procedure. In these cases, confidence in results requires not only traceable

  6. Variação anual dos débitos expiratórios em trabalhadores da indústria têxtil. Relação com a exposição a endotoxinas bacterianas

    Directory of Open Access Journals (Sweden)

    J. Torres da Costa

    1998-05-01

    Full Text Available RESUMO: Os trabalhadores da industría textil estāo expostos. puluentes ocupacionais que frequentemente são causa de doençã respiratória. Entre as patologias descritas, a bissinose, a tosse crónica e a asma são as mais comuns. parecendo a sua lncidência depender dos nivels de empoeiramento e endotoxinas a que os trabalhadores estão expostos.Neste estudo foi nosso objectivo avaliar a relação entre as caracteristicas do local de trabalho (empoeiramento e endotoxinas com a variaçã do VEMS, anual e ao longo do turno de trabalho, e a hiperreactrividade brônquica inespecifica (HRB.Assim, avaliámos 417 trabalhadores têxteis, 231 (fiação e 186 (tecelagem. Os trabalhadores da fiação estavam expostos a 0,68 mg/m3 de empoeiramento, e 14.2 ng/m3 de endotoxinas. Na tecelagem os trabalhadores estavam expostos a um empoeiramento de 0,42 mg/m3 não se tendo encontrado niveis mensuráveis de endotoxinas. Para os trabalhadores da fiação, os níveis de endotoxinal estavam relacionados com a HRB (r=0,32 p0001. The endotoxine levels were also superior among the workers who presented FEV1 variations through the shift≥5% or>200 ml (25.6±19.4 ng/m3 /6.8+0.7 ng/m3 p<0,0001. Dust levels were not related with BHR nor to the variation of FEVI during the shift.The annual FEV1 variation was studied for 3 years (D-FEV1 year, was higher in the spinning workers (-50.2±34 ml/-32.0±12 ml p<0.00001, and was related to endotoxine levels (r=0.48 p<0.001 and with BHR (r=-0.72 p<0.001. There was no relation with dust level. The workers who presented a positive FEV1 variation during the shift, also presented a higher D-FEV1 year, (-75.5±32.7 ml/-34.3±25.1 ml p<0.001.Among the spinning workers, 28.2% have respiratory symptoms. Byssinose was found in 7.7% and asthma in 13.4%, and among them the asthmatics have higher BHR (5.7±7.3 mg/ml/10.5±7.3 mg/ml p<0

  7. Desempenho e características de carcaça de novilhos terminados em pastagem de aveia preta e azevém anual com diferentes níveis de suplementação energética Performance and carcass characteristics of steers supplemented with corn in an oats and annual ryegrass pasture

    Directory of Open Access Journals (Sweden)

    Fábio Schuler Medeiros

    2010-02-01

    Full Text Available Foi avaliado o efeito da suplementação energética sobre o desempenho e as características de carcaça de 24 novilhos cruza Aberdeen Angus x Charolês terminados aos 24 meses em pastagem de azevém anual (Lollium multiflorum L. e aveia (Avena strigosa Schreb manejada em condições de oferta de forragem não limitante ao desempenho animal. Os tratamentos foram níveis de 0; 0,4; 0,8 e 1,2% PV de oferta de concentrado à base de milho moído e minerais. Os animais foram abatidos à medida que atingiram um mínimo de 4,5mm de espessura de gordura na garupa (P8, avaliado por meio de ultrassonografia. Não foram observadas diferenças significativas sobre a deposição de gordura, avaliada in vivo por ultrassonografia ao final da etapa de desempenho, e sobre o ganho médio diário, que apresentaram valores médios de 3,9mm e 1,54kg d-1, respectivamente. A avaliação dos parâmetros bioquímicos séricos evidenciou redução linear dos níveis de ureia e aumento linear para os níveis de colesterol, sem que diferenças significativas fossem observadas sobre os níveis de glicose e triglicerídios. A suplementação produziu incremento linear no rendimento de carcaça e no ganho médio diário de carcaça. Entretanto, não foram observadas diferenças significativas sobre a área de olho de lombo, o peso de abate e o peso de carcaça quente, que apresentaram valores médios de 67,85cm², 438,95kg e 227,75kg. Os níveis crescentes de suplementação utilizados produziram incremento no rendimento e ganho médio diário de carcaça, sem alterações significativas sobre os demais parâmetros de desempenho e carcaça avaliados.The impact of energy supplementation on the performance and carcass caracteristics of 24 Aberdeen Angus x Charolais steers grazing an annual ryegrass (Lollium multiflorum L. and Oats (Avena strigosa Schreb pasture managed in order to avoid constrains to animal performance was evaluated. Treatments were levels of supplementation

  8. Variabilidade genética da produção anual da seringueira: estimativas de parâmetros genéticos e estudo de interação genótipo x ambiente Genetic variability of rubber tree annual yielding: estimates of genetic parameters and study of genotype x environment interaction

    Directory of Open Access Journals (Sweden)

    Paulo de Souza Gonçalves

    1990-01-01

    Full Text Available Selecionaram-se dezenove genótipos de seringueira (Hevea brasiliensis Muell. Arg. considerados como os melhores em vigor e produção em uma população de pés francos estabelecidos no campo de ensaios da Estação Experimental de Pindorama, com o objetivo de estudar a variabilidade genética e ambiental e a interação genótipo x ambiente sobre a produção durante cinco anos. Com base na análise da variância anual e conjunta, estimaram-se parâmetros genéticos para produção, na tentativa de quantificar o ganho genético com a seleção, e as correlações genéticas e fenotfpicas das produções ano a ano. Os resultados das análises da variância dentro de anos mostraram efeitos significativos para genótipos, sendo os efeitos da interação genótipo x ambiente altamente significativos. As estimativas de herdabilídade, no sentido amplo, ao nível de médias de parcelas, foram altas, com amplitude de 0,57 a 0,77, respectivamente, para o segundo e quinto ano de produção. As maiores percentagens de ganho genético foram obtidas no primeiro e quinto ano de produção, 39,03 e 27,57 respectivamente. Correlações genéticas e fenotípicas entre anos de sangria foram altas e significativas. Os altos valores de herdabilidade e ganho genético para o primeiro ano de sangria indicam que a seleção massal conduzida nesta fase proporciona, efetivamente, maior ganho na seleção.Nineteen rubber trees (Hevea brasiliensis Muell. Arg. considered as the best in growth and yield performance, were selected from a mature seedling population in the experimental field at the Pindorama Experiment Station of the "Instituto Agronômico de Campinas", São Paulo State, Brazil. Studies were carried out aiming to assess the annual environmental influence on genetic variation in five years of yielding. Components of variance were estimated from these analyses in an attempt to quantify genotype x environment interactions. The results of the analysis of

  9. Comportamento ingestivo de ovinos no período diurno em pastagem de azevém anual em diferentes estádios fenológicos Diurnal ingestive behavior of sheep grazing annual ryegrass at different phenological growth stages

    Directory of Open Access Journals (Sweden)

    Renato Borges de Medeiros

    2007-02-01

    Full Text Available Este trabalho foi realizado com o objetivo de avaliar o comportamento ingestivo no período diurno de ovelhas Corriedale em final de gestação e início de lactação sob pastejo em uma área de 1,3 ha de azevém anual (Lolium multiflorum Lam. nos estádios vegetativo, pré-florescimento e de florescimento. Foram determinados o tempo de pastejo, a taxa de bocado, o tamanho de bocado, o teor de PB da forragem e os consumos de MS e PB. Os maiores tempos de pastejo e de consumo de MS e PB, para os três estádios do azevém, foram observados ao final da tarde. Nos estádios vegetativo e pré-florescimento, os tempos de pastejo e os consumos de MS e PB registrados no início da manhã (7 às 7h50 foram semelhantes aos verificados no final da tarde. No estádio pré-florescimento, registraram-se ainda nestes horários de pico de pastejo as maiores taxas de bocado e peso de bocado, as quais, associadas ao maior tempo de pastejo, determinaram os maiores consumos de forragem ao longo do dia. Os menores tempos de pastejo ocorreram das 8 às 9h50 durante o estádio vegetativo; das 8 às 8h50 e das 12 às 12h50 durante o pré-florescimento; e das 7 às 8h50 durante o florescimento. Conseqüentemente, nesses mesmos horários foram verificados os menores consumos de MS e PB para os três estádios fenológicos estudados.The objective of this trial was to evaluate the diurnal ingestive behavior of late pregnant-early lactating Corriedale ewes grazing annual ryegrass (Lolium multiflorum Lam. at different phenological growth stages (vegetative, pre-flowering and flowering. Animals were maintained in paddocks of 1.3 ha from July 21 to November 11 of 2000. Grazing time, bite rate, bite weight, crude protein (CP content per bite, and forage dry matter (DM and CP intakes were measured. The longest grazing time and the greatest forage DM and CP intakes were observed at late afternoon on all three phenological growth stages of annual ryegrass. Grazing time and

  10. Alloy materials

    Energy Technology Data Exchange (ETDEWEB)

    Hans Thieme, Cornelis Leo (Westborough, MA); Thompson, Elliott D. (Coventry, RI); Fritzemeier, Leslie G. (Acton, MA); Cameron, Robert D. (Franklin, MA); Siegal, Edward J. (Malden, MA)

    2002-01-01

    An alloy that contains at least two metals and can be used as a substrate for a superconductor is disclosed. The alloy can contain an oxide former. The alloy can have a biaxial or cube texture. The substrate can be used in a multilayer superconductor, which can further include one or more buffer layers disposed between the substrate and the superconductor material. The alloys can be made a by process that involves first rolling the alloy then annealing the alloy. A relatively large volume percentage of the alloy can be formed of grains having a biaxial or cube texture.

  11. Casting materials

    Science.gov (United States)

    Chaudhry, Anil R [Xenia, OH; Dzugan, Robert [Cincinnati, OH; Harrington, Richard M [Cincinnati, OH; Neece, Faurice D [Lyndurst, OH; Singh, Nipendra P [Pepper Pike, OH

    2011-06-14

    A foam material comprises a liquid polymer and a liquid isocyanate which is mixed to make a solution that is poured, injected or otherwise deposited into a corresponding mold. A reaction from the mixture of the liquid polymer and liquid isocyanate inside the mold forms a thermally collapsible foam structure having a shape that corresponds to the inside surface configuration of the mold and a skin that is continuous and unbroken. Once the reaction is complete, the foam pattern is removed from the mold and may be used as a pattern in any number of conventional casting processes.

  12. Energy materials

    CERN Document Server

    Bruce, Duncan W; Walton, Richard I

    2011-01-01

    In an age of global industrialisation and population growth, the area of energy is one that is very much in the public consciousness. Fundamental scientific research is recognised as being crucial to delivering solutions to these issues, particularly to yield novel means of providing efficient, ideally recyclable, ways of converting, transporting and delivering energy. This volume considers a selection of the state-of-the-art materials that are being designed to meet some of the energy challenges we face today. Topics are carefully chosen that show how the skill of the synthetic chemist can

  13. Construction material

    Science.gov (United States)

    Wagh, Arun S [Orland Park, IL; Antink, Allison L [Bolingbrook, IL

    2008-07-22

    A structural material of a polystyrene base and the reaction product of the polystyrene base and a solid phosphate ceramic is applied as a slurry which includes one or more of a metal oxide or a metal hydroxide with a source of phosphate to produce a phosphate ceramic and a poly (acrylic acid or acrylate) or combinations or salts thereof and polystyrene or MgO applied to the polystyrene base and allowed to cure so that the dried aqueous slurry chemically bonds to the polystyrene base. A method is also disclosed of applying the slurry to the polystyrene base.

  14. Photographic materials

    International Nuclear Information System (INIS)

    Jamieson, P.B.

    1980-01-01

    Radiographic films based on silver halides are normally handled under red or orange safelights to prevent fogging due to their sensitivity to white light. The present invention relates to ultraviolet radiation sensitive material which can be handled under virtually white light without significant fogging. The film material is comprised of a base having at least one layer of a photographic silver halide emulsion and a yellow filter dye screening the emulsion from visible radiation. The silver halide emulsion contains 50-100 mole % of silver chloride, the higher the silver chloride content, the lower the visible light sensitivity. The nature and properties of the yellow filter dye are described. When recording an X-ray image, the film is loaded into the camera under white safelight conditions from which light of wavelength shorter than 400 nm is excluded. The film is in contact with one or more phosphor screens capable when struck by X-rays of emitting ultraviolet radiation, the screens having a peak ultraviolet emission within the wavelength range of 250-380 nm. After X-ray exposure, the film is removed and developed. Two examples illustrating the invention are given. (U.K.)

  15. Coating materials

    International Nuclear Information System (INIS)

    Ozeki, Takao; Kimura, Tadashi; Kobayashi, Juichi; Maeda, Yutaka; Nakamoto, Hideo.

    1969-01-01

    A non-solvent type coating material composition having properties as good as thermosetting acrylic or amino alkid resins is provided by employing active energy irradiation, particularly electron beams, using a radically polymerizable low molecular compound (A) (hereafter called an oligomer) containing at least two vinyl radicals in one molecule. This oligomer is produced by reacting an epoxy-containing vinyl monomer with alpha-, beta-ethylene unsaturated carboxylic acids or their anhydrides. The composition (I) contains 10% - 100% of this oligomer. In embodiments, an oligomer having a fiberous trivinyl construction is produced by reacting 180 parts by weight of glycidyl methacrylate ester with 130 parts of itaconic acid in the presence of a polymerization-inhibitor and an addition reaction catalyst at 90 0 C for 6 hours. In practice, the coating material compositions (1), consist of the whole oligomer [I-1]; (2), consist of 10-90% of (A) component and 90%-10% of vinyl monomers containing at least 30% (meth) acrylic monomer [I-2]; (3), 10%-90% of component (A) and 90%-10% of other monomers containing at least two vinyl radicals [I-3]; (4), a mixture of (I-2) and (I-3), [I-4]; and (5), consist of 50% or less unsaturated polyester of 500-5,000 molecular weight range or drying oil, or alkyd resin of 500-5,000 molecular weight range modified by drying oil, [I-5]. As a catalyst a tertiary amino vinyl compound is preferred. Five examples are given. (Iwakiri, K.)

  16. Functional materials

    International Nuclear Information System (INIS)

    Park, J. Y.; Hong, G. W.; Lee, H. J.

    2002-05-01

    Development of fabrication process of functional ceramic materials, evaluation of characteristics and experiments for understanding of irradiation behavior of ceramics were carried out for application of ceramics to the nuclear industry. The developed processes were the SiC surface coating technology with large area for improvement of wear resistance and corrosion resistance, the fabrication technology of SiC composites for excellent irradiation resistance, performance improvement technology of SiC fiber and nano-sized powder processing by combustion ignition and spray. Typical results were CVD SiC coating with diameter of 25cm and thickness of 100μm, highly dense SiC composite by F-CVI, heat-treating technology of SiC fiber using B4C power, and nano-sized powders of ODS-Cu, Li-based breeding materials, Ni-based metal powders with primary particle diameter of 20∼50nm. Furthermore, test equipment, data productions and damage evaluations were performed to understand corrosion resistance and wear resistance of alumina, silicon carbide and silicon nitride under PWR or PHWR operation conditions. Experimental procedures and basic technologies for evaluation of irradiation behavior were also established. Additionally, highly reactive precursor powders were developed by various technologies and the powders were applied to the fabrication of 100 m long Ag/Bi-2223 multi-filamentary wires. High Tc magnets and fly wheel for energy storage were developed, as well

  17. Virtual materiality

    DEFF Research Database (Denmark)

    Søndergaard, Dorte Marie

    as their recounts of them and 3. the consumption of other media products like movies, reality shows, YouTube videos etc. How do we theorize ‘matter’ in such dimensions? Is it possible to theorize virtual matter as ‘materiality’ in line with any real life materiality? What conceptualization will help us understand......? These questions become crucial when we follow matter in and across real life, virtual experience, recounted imagery, night dreams, YouTube videos and even further. Some may already have recognized Phillip’s skeleton army as a transport/transformation from Lord of the Rings, DVD 3, the army which Aragon calls out....... Butler, J. (1993) Bodies that Matter. On the Discursive Limits of “Sex”. London: Routledge. Durkin, K. et al. (1998) Children, Media and Agression. Current Research in Australia and New Zealand. In: Carlson, U. & von Feilitzen, C. (red): Children and Media Violence. Yearbook from the UNESCO International...

  18. Photographic materials

    International Nuclear Information System (INIS)

    1980-01-01

    Radiographic films based on silver halides are normally handled under red or orange safelights to prevent fogging due to their sensitivity to white light. The present invention relates to ultraviolet radiation sensitive material which can be handled under virtually white light without significant fogging. A photographic, chemically sensitised silver halide emulsion is described, containing 50-100 mole % of silver chloride, the higher the silver chloride content, the lower the visible light sensitivity. The remaining silver halide, if any, is silver bromide and/or silver iodide. The silver halide grains are grown in the presence of ammonia, an excess of chloride ions and tetraazaindene growth controller. Examples illustrating the invention are given. (U.K.)

  19. Photovoltaic Materials

    Energy Technology Data Exchange (ETDEWEB)

    Duty, C.; Angelini, J.; Armstrong, B.; Bennett, C.; Evans, B.; Jellison, G. E.; Joshi, P.; List, F.; Paranthaman, P.; Parish, C.; Wereszczak, A.

    2012-10-15

    The goal of the current project was to help make the US solar industry a world leader in the manufacture of thin film photovoltaics. The overall approach was to leverage ORNL’s unique characterization and processing technologies to gain a better understanding of the fundamental challenges for solar cell processing and apply that knowledge to targeted projects with industry members. ORNL has the capabilities in place and the expertise required to understand how basic material properties including defects, impurities, and grain boundaries affect the solar cell performance. ORNL also has unique processing capabilities to optimize the manufacturing process for fabrication of high efficiency and low cost solar cells. ORNL recently established the Center for Advanced Thin-film Systems (CATS), which contains a suite of optical and electrical characterization equipment specifically focused on solar cell research. Under this project, ORNL made these facilities available to industrial partners who were interested in pursuing collaborative research toward the improvement of their product or manufacturing process. Four specific projects were pursued with industrial partners: Global Solar Energy is a solar industry leader in full scale production manufacturing highly-efficient Copper Indium Gallium diSelenide (CIGS) thin film solar material, cells and products. ORNL worked with GSE to develop a scalable, non-vacuum, solution technique to deposit amorphous or nanocrystalline conducting barrier layers on untextured stainless steel substrates for fabricating high efficiency flexible CIGS PV. Ferro Corporation’s Electronic, Color and Glass Materials (“ECGM”) business unit is currently the world’s largest supplier of metallic contact materials in the crystalline solar cell marketplace. Ferro’s ECGM business unit has been the world's leading supplier of thick film metal pastes to the crystalline silicon PV industry for more than 30 years, and has had operational

  20. Biointegrating Materials

    Science.gov (United States)

    Amédée, J.; Bordenave, L.; Durrieu, M.-C.; Fricain, J.-C.; Pothuaud, L.

    The extraordinary increase in human longevity explains the growing need for replacement organs. The remarkable successes of conventional transplants (associated with the development of effective antirejection drugs and improved control of their administration) are also accompanied by certain drawbacks. First on the list is an inadequate supply of replacement organs: the number of candidates for transplants grows larger, opposition to the removal of organs increases, and the number of transplants has reached a ceiling. Furthermore, it has come to light over the past few years that organ transplants carry a significant risk of transmitting pathogens. Finally, the main drawback lies in the need to pursue an immunosuppression treatment. Scientists and doctors have long been in search of alternatives to human organ transplants. According to the definition drawn up in Chester in 1986 at the Consensus Conference organised under the aegis of the European Society for Biomaterials, biomaterials are non-viable materials used in a medical device and destined to interact with biological systems, whether they contribute to the constitution of a diagnostic device, a tissue or organ substitute, or a device designed to provide functional assistance or replacement.

  1. Coating materials

    International Nuclear Information System (INIS)

    Ozeki, Takao; Kimura, Tadashi; Kobayashi, Juichi; Maeda, Yutaka; Nakamoto, Hideo.

    1969-01-01

    A non-solvent type coating material composition is provided which can be hardened by irradiation with active energy, particularly electron beams, using a composition which contains 10%-100% of a radically polymerizable low molecular compound (A), (hereafter called an oligomer), having at least two vinyl radicals in one molecule. These compositions have a high degree of polymerization and characteristics equivalent to thermosetting acrylic or amino alkyd resin. The oligomer (A) is produced by reacting an epoxy-containing vinyl monomer with saturated polycarboxylic acids or anhydrides. In one embodiment, 146 parts by weight of adipic acid and 280 parts of glycidyl methacrylate ester undergo addition reaction in the presence of a polymerization-inhibitor and a catalyst at 90 0 C for 6 hours to produce an oligomer having a fiberous divinyl construction. The coating composition utilizes this oligomer in the forms of (I-1), a whole oligomer; (I-2), 0%-90% of this oligomer and 90%-10% of a vinyl monomer containing at least 30% of (meth) acrylic monomer; (I-3), 10%-90% of such oligomer and 90%-10% of other monomers containing at least two vinyl radicals in one molecule; (I-4), a mixture of (I-2) and (I-3) in proportion of 1/9 to 9/1, and (I-5), above four compositions each containing 50% or less unsaturated polyester or drying oil having 500-5,000 molecules or a drying oil-modified alkyd resin having 500-5,000 molecules. Four examples are given. (Iwakiri, K.)

  2. The Newest Machine Material

    International Nuclear Information System (INIS)

    Seo, Yeong Seop; Choe, Byeong Do; Bang, Meong Sung

    2005-08-01

    This book gives descriptions of machine material with classification of machine material and selection of machine material, structure and connection of material, coagulation of metal and crystal structure, equilibrium diagram, properties of metal material, elasticity and plasticity, biopsy of metal, material test and nondestructive test. It also explains steel material such as heat treatment of steel, cast iron and cast steel, nonferrous metal materials, non metallic materials, and new materials.

  3. Geopolymer resin materials, geopolymer materials, and materials produced thereby

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Dong-Kyun; Medpelli, Dinesh; Ladd, Danielle; Mesgar, Milad

    2018-01-09

    A product formed from a first material including a geopolymer resin material, a geopolymer material, or a combination thereof by contacting the first material with a fluid and removing at least some of the fluid to yield a product. The first material may be formed by heating and/or aging an initial geopolymer resin material to yield the first material before contacting the first material with the fluid. In some cases, contacting the first material with the fluid breaks up or disintegrates the first material (e.g., in response to contact with the fluid and in the absence of external mechanical stress), thereby forming particles having an external dimension in a range between 1 nm and 2 cm.

  4. Gas storage materials, including hydrogen storage materials

    Science.gov (United States)

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2013-02-19

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  5. Geopolymer resin materials, geopolymer materials, and materials produced thereby

    Science.gov (United States)

    Seo, Dong-Kyun; Medpelli, Dinesh; Ladd, Danielle; Mesgar, Milad

    2016-03-29

    A product formed from a first material including a geopolymer resin material, a geopolymer resin, or a combination thereof by contacting the first material with a fluid and removing at least some of the fluid to yield a product. The first material may be formed by heating and/or aging an initial geopolymer resin material to yield the first material before contacting the first material with the fluid. In some cases, contacting the first material with the fluid breaks up or disintegrates the first material (e.g., in response to contact with the fluid and in the absence of external mechanical stress), thereby forming particles having an external dimension in a range between 1 nm and 2 cm.

  6. Towards Materials Sustainability through Materials Stewardship

    Directory of Open Access Journals (Sweden)

    Christopher D. Taylor

    2016-10-01

    Full Text Available Materials sustainability requires a concerted change in philosophy across the entire materials lifecycle, orienting around the theme of materials stewardship. In this paper, we address the opportunities for improved materials conservation through dematerialization, durability, design for second life, and diversion of waste streams through industrial symbiosis.

  7. Computational Materials Science | Materials Science | NREL

    Science.gov (United States)

    Computational Materials Science Computational Materials Science An image of interconnecting, sphere science capabilities span many research fields and interests. Electronic, Optical, and Transport Properties of Photovoltaic Materials Material properties and defect physics of Si, CdTe, III-V, CIGS, CZTS

  8. Establecimiento de un material de referencia de trabajo para interleucina-2 recombinante

    Directory of Open Access Journals (Sweden)

    Maribel Vega

    2005-08-01

    Full Text Available Resumen La interleucina-2 es una glicoproteína humana de 133 aminoácidos que resulta vital para obtener una respuesta inmunológica efectiva. En el Centro de Ingeniería Genética y Biotecnología ha podido obtenerse por vía recombinante a partir de una cepa de Escherichia coli. Para el control de la calidad de cada lote producido se hizo necesaria la elaboración de un material de referencia de trabajo. En esta publicación se describen los pasos seguidos en la obtención del lote candidato y la preparación del material de referencia como tal. Se demostró que el patrón de trabajo preparado es homogéneo para el uso en las técnicas analíticas de control de calidad de la interleucina-2 y se predijo una pérdida de actividad inferior al 5 % anual mediante un estudio de estabilidad acelerada. Se obtuvieron valores adecuados para la pureza del material de referencia, evaluada por electroforesis y para la actividad biológica, que se estableció con trazabilidad al material de referencia internacional para este producto.Establishment of a working reference material for recombinant interleukin-2 Interleukin-2 is a human glycoprotein with 133 aminoacids that is crucial for attaining an effective immunological reaction. In the Center of Genetic Engineering and Biotechnology this protein has been obtained as a recombinant product from Eschericia coli bacteria. For the quality control of every batch produced, it was necessary to establish a working reference material. In this paper we describe the steps taken to obtain a candidate batch and the preparation of the working material as such. It was proved that the working pattern obtained.is homogenous for its use in the analytical techniques of quality control of interleukin-2. A loss of activity lower than an annual 5 % was predicted by an accelerated stability study. Adequate values were attained for the purity of the reference material, evaluated by electrophoresis, and for the biological

  9. The materials physics companion

    CERN Document Server

    Fischer-Cripps, Anthony C

    2014-01-01

    Introduction to Materials Physics: Structure of matter. Solid state physics. Dynamic properties of solids. Dielectric Properties of Materials: Dielectric properties. Ferroelectric and piezoelectric materials. Dielectric breakdown. Applications of dielectrics. Magnetic Properties of Materials: Magnetic properties. Magnetic moment. Spontaneous magnetization. Superconductivity.

  10. Metallic composite materials

    International Nuclear Information System (INIS)

    Frommeyer, G.

    1987-01-01

    The structure and properties of metallic composite materials and composite materials with metallic matrix are considered. In agreement with the morphology of constituent phases the following types of composite materials are described: dispersion-strengthened composite materials; particle-reinforced composite materials; fibrous composite materials; laminar composite materials. Data on strength and electric properties of the above-mentioned materials, as well as effect of the amount, location and geometric shape of the second phase on them, are presented

  11. Composite material dosimeters

    Science.gov (United States)

    Miller, Steven D.

    1996-01-01

    The present invention is a composite material containing a mix of dosimeter material powder and a polymer powder wherein the polymer is transparent to the photon emission of the dosimeter material powder. By mixing dosimeter material powder with polymer powder, less dosimeter material is needed compared to a monolithic dosimeter material chip. Interrogation is done with excitation by visible light.

  12. Method for forming materials

    Science.gov (United States)

    Tolle, Charles R [Idaho Falls, ID; Clark, Denis E [Idaho Falls, ID; Smartt, Herschel B [Idaho Falls, ID; Miller, Karen S [Idaho Falls, ID

    2009-10-06

    A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

  13. Photorefractive Materials and Their Applications 2 Materials

    CERN Document Server

    Günter, Peter

    2007-01-01

    Photorefractive Materials and Their Applications 2: Materials is the second of three volumes within the Springer Series in Optical Sciences. The book gives a comprehensive review of the most important photorefractive materials and discusses the physical properties of organic and inorganic crystals as well as poled polymers. In this volume, photorefractive effects have been investigated at wavelengths covering the UV, visible and near infrared. Researchers in the field and graduate students of solid-state physics and engineering will gain a thorough understanding of the properties of materials in photorefractive applications. The other two volumes are: Photorefractive Materials and Their Applications 1: Basic Effects. Photorefractive Materials and Their Applications 3: Applications.

  14. Mechanical Material Engineering

    International Nuclear Information System (INIS)

    Kim, Mun Il

    1993-01-01

    This book introduced mechanical material with introduction, basic problems about metal ingredient of machine of metal and alloy, property of metal material mechanical metal material such as categorization of metal material and high tensile structure steel, mechanic design and steel material with three important points on using of steel materials, selection and directions machine structural steel, selection and directions of steel for tool, selection and instruction of special steel like stainless steel and spring steel, nonferrous metal materials and plastic.

  15. Materials with structural hierarchy

    Science.gov (United States)

    Lakes, Roderic

    1993-01-01

    The role of structural hierarchy in determining bulk material properties is examined. Dense hierarchical materials are discussed, including composites and polycrystals, polymers, and biological materials. Hierarchical cellular materials are considered, including cellular solids and the prediction of strength and stiffness in hierarchical cellular materials.

  16. Coated electroactive materials

    Science.gov (United States)

    Amine, Khalil; Abouimrane, Ali

    2016-08-30

    A process includes suspending an electroactive material in a solvent, suspending or dissolving a carbon precursor in the solvent; and depositing the carbon precursor on the electroactive material to form a carbon-coated electroactive material. Compositions include a graphene-coated electroactive material prepared from a solution phase mixture or suspension of an electroactive material and graphene, graphene oxide, or a mixture thereof.

  17. Aerogel / Polymer Composite Materials

    Science.gov (United States)

    Williams, Martha K. (Inventor); Smith, Trent M. (Inventor); Fesmire, James E. (Inventor); Roberson, Luke B. (Inventor); Clayton, LaNetra M. (Inventor)

    2017-01-01

    The invention provides new composite materials containing aerogels blended with thermoplastic polymer materials at a weight ratio of aerogel to thermoplastic polymer of less than 20:100. The composite materials have improved thermal insulation ability. The composite materials also have better flexibility and less brittleness at low temperatures than the parent thermoplastic polymer materials.

  18. Nanocrystalline ceramic materials

    Science.gov (United States)

    Siegel, Richard W.; Nieman, G. William; Weertman, Julia R.

    1994-01-01

    A method for preparing a treated nanocrystalline metallic material. The method of preparation includes providing a starting nanocrystalline metallic material with a grain size less than about 35 nm, compacting the starting nanocrystalline metallic material in an inert atmosphere and annealing the compacted metallic material at a temperature less than about one-half the melting point of the metallic material.

  19. Materials Informatics: Statistical Modeling in Material Science.

    Science.gov (United States)

    Yosipof, Abraham; Shimanovich, Klimentiy; Senderowitz, Hanoch

    2016-12-01

    Material informatics is engaged with the application of informatic principles to materials science in order to assist in the discovery and development of new materials. Central to the field is the application of data mining techniques and in particular machine learning approaches, often referred to as Quantitative Structure Activity Relationship (QSAR) modeling, to derive predictive models for a variety of materials-related "activities". Such models can accelerate the development of new materials with favorable properties and provide insight into the factors governing these properties. Here we provide a comparison between medicinal chemistry/drug design and materials-related QSAR modeling and highlight the importance of developing new, materials-specific descriptors. We survey some of the most recent QSAR models developed in materials science with focus on energetic materials and on solar cells. Finally we present new examples of material-informatic analyses of solar cells libraries produced from metal oxides using combinatorial material synthesis. Different analyses lead to interesting physical insights as well as to the design of new cells with potentially improved photovoltaic parameters. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Material efficiency: providing material services with less material production.

    Science.gov (United States)

    Allwood, Julian M; Ashby, Michael F; Gutowski, Timothy G; Worrell, Ernst

    2013-03-13

    Material efficiency, as discussed in this Meeting Issue, entails the pursuit of the technical strategies, business models, consumer preferences and policy instruments that would lead to a substantial reduction in the production of high-volume energy-intensive materials required to deliver human well-being. This paper, which introduces a Discussion Meeting Issue on the topic of material efficiency, aims to give an overview of current thinking on the topic, spanning environmental, engineering, economics, sociology and policy issues. The motivations for material efficiency include reducing energy demand, reducing the emissions and other environmental impacts of industry, and increasing national resource security. There are many technical strategies that might bring it about, and these could mainly be implemented today if preferred by customers or producers. However, current economic structures favour the substitution of material for labour, and consumer preferences for material consumption appear to continue even beyond the point at which increased consumption provides any increase in well-being. Therefore, policy will be required to stimulate material efficiency. A theoretically ideal policy measure, such as a carbon price, would internalize the externality of emissions associated with material production, and thus motivate change directly. However, implementation of such a measure has proved elusive, and instead the adjustment of existing government purchasing policies or existing regulations-- for instance to do with building design, planning or vehicle standards--is likely to have a more immediate effect.

  1. Conducting Polymeric Materials

    DEFF Research Database (Denmark)

    Hvilsted, Søren

    2016-01-01

    The overall objective of this collection is to provide the most recent developments within the various areas of conducting polymeric materials. The conductivity of polymeric materials is caused by electrically charged particles, ions, protons and electrons. Materials in which electrons...

  2. Multifunctional materials and composites

    Science.gov (United States)

    Seo, Dong-Kyun; Jeon, Ki-Wan

    2017-08-22

    Forming multifunctional materials and composites thereof includes contacting a first material having a plurality of oxygen-containing functional groups with a chalcogenide compound, and initiating a chemical reaction between the first material and the chalcogenide compound, thereby replacing oxygen in some of the oxygen-containing functional groups with chalcogen from the chalcogen-containing compound to yield a second material having chalcogen-containing functional groups and oxygen-containing functional groups. The first material is a carbonaceous material or a macromolecular material. A product including the second material is collected and may be processed further to yield a modified product or a composite.

  3. Sea materials experimental plans

    International Nuclear Information System (INIS)

    1987-07-01

    This Seal Materials Performance Test Plan describes the plan for testing materials that will be used to seal a high-level nuclear waste repository in salt at a proposed site in Deaf Smith County, Texas. The need for sealing and backfilling the repository and the use of various sealing materials are described. The seal materials include mined salt backfills, cementitious bulkheads and plugs, and earthen backfills. The laboratory testing program for characterizing the behavior and performance of these materials is described. This report includes plans for screening materials, evaluating candidate materials to be tested, and testing a representative set of materials

  4. Nanoscale materials in chemistry

    National Research Council Canada - National Science Library

    Klabunde, Kenneth J; Richards, Ryan

    2009-01-01

    ...: Disordered, Porous Nanostructures Stephanie L. Brock 209 9 Ordered Microporous and Mesoporous Materials Freddy Kleitz 243 10 Applications of Microporous and Mesoporous Materials Anirban Ghosh,...

  5. Physically Functional Materials

    DEFF Research Database (Denmark)

    2002-01-01

    acids or peptides having azobenzenes or other physicially functional groups, e.g., photoresponsive groups, as side chains. These compounds may be synthesized using solid phase peptide synthesis techniques. Materials, e.g., thin films, comprising such compounds may be used for optical storage...... of information (holographic data storage), nonlinear optics (NLO), as photoconductors, photonic band-gap materials, electrically conducting materials, electroluminescent materials, piezo-electric materials, pyroelectric materials, magnetic materials, ferromagnetic materials, ferroelectric materials......, photorefractive materials, or materials in which light-induced conformational changes can be produced. Optical anisotropy may reversibly be generated with polarized laser light whereby a hologram is formed. First order diffraction efficiencies of up to around 80% have been obtained....

  6. Tritium breeding materials

    International Nuclear Information System (INIS)

    Hollenberg, G.W.; Johnson, C.E.; Abdou, M.

    1984-03-01

    Tritium breeding materials are essential to the operation of D-T fusion facilities. Both of the present options - solid ceramic breeding materials and liquid metal materials are reviewed with emphasis not only on their attractive features but also on critical materials issues which must be resolved

  7. Tritium breeding materials

    International Nuclear Information System (INIS)

    Hollenberg, G.W.; Johnson, C.E.; Abdou, M.A.

    1984-01-01

    Tritium breeding materials are essential to the operation of D-T fusion facilities. Both of the present options - solid ceramic breeding materials and liquid metal materials are reviewed with emphasis not only on their attractive features but also on critical materials issues which must be resolved

  8. Materials Science | NREL

    Science.gov (United States)

    microscopy and imaging science, interfacial and surface science, materials discovery, and thin-film material Science Materials Science Illustration with bottom row showing a ball-and-stick model and top row dense black band. State-of-the-art advances in materials science come from a combination of experiments

  9. Coated ceramic breeder materials

    Science.gov (United States)

    Tam, Shiu-Wing; Johnson, Carl E.

    1987-01-01

    A breeder material for use in a breeder blanket of a nuclear reactor is disclosed. The breeder material comprises a core material of lithium containing ceramic particles which has been coated with a neutron multiplier such as Be or BeO, which coating has a higher thermal conductivity than the core material.

  10. Materials Analysis and Modeling of Underfill Materials.

    Energy Technology Data Exchange (ETDEWEB)

    Wyatt, Nicholas B [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chambers, Robert S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-08-01

    The thermal-mechanical properties of three potential underfill candidate materials for PBGA applications are characterized and reported. Two of the materials are a formulations developed at Sandia for underfill applications while the third is a commercial product that utilizes a snap-cure chemistry to drastically reduce cure time. Viscoelastic models were calibrated and fit using the property data collected for one of the Sandia formulated materials. Along with the thermal-mechanical analyses performed, a series of simple bi-material strip tests were conducted to comparatively analyze the relative effects of cure and thermal shrinkage amongst the materials under consideration. Finally, current knowledge gaps as well as questions arising from the present study are identified and a path forward presented.

  11. Trends in building materials

    CSIR Research Space (South Africa)

    Mapiravana, Joseph

    2012-07-01

    Full Text Available , steel and composites research. Analysis of the building materials market situation in South Africa identified the major building material cost drivers as cement and concrete and steel. For South Africa, research and development focus has been... in South Africa be cement and concrete, light-weight steel construction, smart tiles and composite materials. Nanotechnology materials should be used for property enhancement. The building materials developed should be modularised and/or panelised...

  12. Plasma-material interactions

    International Nuclear Information System (INIS)

    Wilson, K.L.

    1984-01-01

    Plasma-interactive components must be resistant to erosion processes, efficient in heat removal, and effective in minimizing tritium inventory and permeation. As long as plasma edge temperatures are 50 eV, no one material can satisfy the diverse requirements imposed by these plasma materials interactions. The only solution is the design of duplex, or even more complicated, structures. The material that faces the plasma should be low atomic number, with acceptable erosion and evaporation characteristics. The substrate material must have high thermal conductivity for heat removal. Finally, materials must be selected judiciously for tritium compatibility. In conclusion, materials play a critical role in the achievement of safe and economical magnetic fusion energy. Improvements in materials have already led to many advances in present day device operation, but additional innovative materials solutions are required for the critical plasma materials interaction issues in future power reactors

  13. Lodos de esgoto alcalinizados em solos do estado do Paraná: taxa de aplicação máxima anual e comparação entre métodos para recomendação agrícola Alkaline sewage sludge on soils of Paraná state: maximum annual application rate and comparison between methods for agricultural recommendation

    Directory of Open Access Journals (Sweden)

    Giovana Clarice Poggere

    2012-12-01

    Full Text Available Para o uso agrícola do lodo de esgoto higienizado por processo de estabilização alcalina prolongada (lodo EAP, além de estabelecer limites de aplicação máxima conforme a legislação, é necessário estudar atributos dos lodos e dos solos que favoreçam as metodologias de sua recomendação. Objetivou-se determinar a taxa de aplicação máxima anual (TAMA de lodo EAP pelo critério de elevação do pH para 20 lodos e solos do estado do Paraná; determinar a influência dos atributos desses solos nos valores da TAMA de lodo EAP; avaliar o uso dos métodos de saturação por bases (V% e pH referência (SMP, utilizando como padrão o método da incubação. Empregou-se o ensaio de incubação para lodo EAP aplicado ao solo, conforme metodologia oficial. Os resultados indicam que as TAMA de lodo EAP variaram de 10 a >80 Mg.ha-1 para as 20 regionais estudadas; Os atributos químicos (capacidade de troca de cátions, H+Al e carbono e físico (argila são os que melhor definem a determinação da TAMA, apresentando relação diretamente proporcional. Os métodos do V% e do pH referência (SMP para pH H2O 5,5 mostraram-se seguros quanto à recomendação agrícola.For agricultural use of alkalinized sludge (AS, beyond to establish the maximum application limits to comply with the legislation, it is necessary to study the attributes of sludges and soils that favor the methodologies of its recommendation. The objectives of this study were to determine the maximum annual application rate (MAAR of alkalinized sludge (AS according to the pH elevation criterion for 20 sludge origins and soils of the Paraná state; to determine the influence of soil attributes over the MAAR of AS; to evaluate two methods rate calculation for AS, the base saturation (V% and pH reference (SMP by comparing with the standard incubation methodology for AS sludge application. It was used incubation test for AS applied to soil, following official methodology. The results

  14. Advancing materials research

    International Nuclear Information System (INIS)

    Langford, H.D.; Psaras, P.A.

    1987-01-01

    The topics discussed in this volume include historical perspectives in the fields of materials research and development, the status of selected scientific and technical areas, and current topics in materials research. Papers are presentd on progress and prospects in metallurgical research, microstructure and mechanical properties of metals, condensed-matter physics and materials research, quasi-periodic crystals, and new and artifically structured electronic and magnetic materials. Consideration is also given to materials research in catalysis, advanced ceramics, organic polymers, new ways of looking at surfaces, and materials synthesis and processing

  15. Advanced energy materials

    CERN Document Server

    Tiwari, Ashutosh

    2014-01-01

    An essential resource for scientists designing new energy materials for the vast landscape of solar energy conversion as well as materials processing and characterization Based on the new and fundamental research on novel energy materials with tailor-made photonic properties, the role of materials engineering has been to provide much needed support in the development of photovoltaic devices. Advanced Energy Materials offers a unique, state-of-the-art look at the new world of novel energy materials science, shedding light on the subject's vast multi-disciplinary approach The book focuses p

  16. Materials science and engineering

    Energy Technology Data Exchange (ETDEWEB)

    Lesuer, D.R.

    1997-02-01

    During FY-96, work within the Materials Science and Engineering Thrust Area was focused on material modeling. Our motivation for this work is to develop the capability to study the structural response of materials as well as material processing. These capabilities have been applied to a broad range of problems, in support of many programs at Lawrence Livermore National Laboratory. These studies are described in (1) Strength and Fracture Toughness of Material Interfaces; (2) Damage Evolution in Fiber Composite Materials; (3) Flashlamp Envelope Optical Properties and Failure Analysis; (4) Synthesis and Processing of Nanocrystalline Hydroxyapatite; and (5) Room Temperature Creep Compliance of Bulk Kel-E.

  17. Materials for breeding blankets

    International Nuclear Information System (INIS)

    Mattas, R.F.; Billone, M.C.

    1995-09-01

    There are several candidate concepts for tritium breeding blankets that make use of a number of special materials. These materials can be classified as Primary Blanket Materials, which have the greatest influence in determining the overall design and performance, and Secondary Blanket Materials, which have key functions in the operation of the blanket but are less important in establishing the overall design and performance. The issues associated with the blanket materials are specified and several examples of materials performance are given. Critical data needs are identified

  18. Materials for breeding blankets

    International Nuclear Information System (INIS)

    Mattas, R.F.; Billone, M.C.

    1996-01-01

    There are several candidate concepts for tritium breeding blankets that make use of a number of special materials. These materials can be classified as primary blanket materials, which have the greatest influence in determining the overall design and performance, and secondary blanket materials, which have key functions in the operation of the blanket but are less important in establishing the overall design and performance. The issues associated with the blanket materials are specified and several examples of materials performance are given. Critical data needs are identified. (orig.)

  19. Materials by design

    International Nuclear Information System (INIS)

    Eberhardt, J.; Hay, P.J.; Carpenter, J.A. Jr.

    1986-01-01

    Major developments in materials characterization instrumentation over the past decade have helped significantly to elucidate complex processes and phenomena connected with the microstructure of materials and interfacial interactions. Equally remarkable advances in theoretical models and computer technology also have been taking place during this period. These latter now permit, for example, in selected cases the computation of material structures and bonding and the prediction of some material properties. Two assessments of the state of the art of instrumental techniques and theoretical methods for the study of material structures and properties have recently been conducted. This paper discusses aspects from these assessments of computational theoretical methods apply to materials

  20. Development of Positive Matrix Factorization Model (PMF) to Annual Study of the PM2.5 Organic Composition in ChapinerIa; Desarrollo del Modelo de Factorizacion de la Matriz Positiva (PMF) al Estudio Anual de la Composicion Organica del PM2.5 en Chapineria

    Energy Technology Data Exchange (ETDEWEB)

    Pindado, O.; Perez, R. M.; Garcia, S.

    2013-05-01

    The Positive Matrix Factorization (PMF) application to a set of PM2.5 data collected in a rural area of Madrid for a period of 1 year has been developed. Results has let describing the particulate faction of atmospheric aerosol collected in Chapineria according to 7 factor, among them fossil fuel combustion by traffic, wax plants, primary emissions of organic carbon, crustal material, and secondary organic aerosol. Five of these factors are related to primary particles; meanwhile only one factor has been associated to secondary particles. Finally, a factor has not been associated to any known source of particulate matter. (Author)

  1. Distribution of K, eU and Th and evaluation of annual radiation dose in the region of the Serra do Carambei Granite - PR; Distribuicao de K, eU e eTh e avaliacao da dose anual de radiacao na regiao do Granito Serra do Carambei - PR

    Energy Technology Data Exchange (ETDEWEB)

    Godoy, Luiz C., E-mail: luizcgodoy@brturbo.com.br [Departamento de Geociencias, Universidade Estadual de Ponta Grossa, PR (Brazil); Bittencourt, Andre V.L., E-mail: andre@ufpr.br [Laboratorio de Pesquisas Hidrogeologicas - LPH, Departamento de Geologia, Universidade Federal do Parana, Centro Politecnico, Curitiba, PR (Brazil); Santos, Leonardo J.C., E-mail: santos@ufpr.br [Laboratorio de Biogeografia e Solos - LABS, Departamento de Geografia, Universidade Federal do Parana, Centro Politecnico, Curitiba, PR (Brazil); Ferreira, Francisco J.F., E-mail: francisco.ferreira@ufpr.br [Laboratorio de Pesquisas em Geofisica Aplicada - LPGA, Departamento de Geologia, Universidade Federal do Parana, Centro Politecnico, Curitiba, PR (Brazil)

    2011-04-15

    is study was conducted in an area of 14 km in length oriented in the NNE direction by 7.3 km wide, covering the totality of the Serra do Carambei Granite and adjacent units. Located in the northern region of the Alagados dam, Parana State, this granite contains relatively high concentrations of K, eU and eTh, known since the 1970s through airborne and terrestrial gamma-ray spectrometry surveys. Recent radiochemical tests conducted on 61 samples of geological materials such as rocks (17 samples) and material of the weathering mantle and alluvial deposits (44 samples), confirmed the occurrence of radioactive anomalies in this granite, especially in thorium and uranium. The contents of K, eU and eTh obtained in gamma-ray spectrometry survey and radiochemical tests, converted to annual radiation dose (ARD), allowed to evaluate the intensity of natural radiation, whose levels relatively high in certain regions of the study area, can offer hazard to the local populations. The analysis and interpretation of data, as well the preparation of contour maps of K, eU and eTh were fundamental to understand the behavior and mobility of radionuclides in different environmental compartments of the area. (author)

  2. Materials risk analysis.

    Science.gov (United States)

    2010-02-01

    State highway authorities routinely examine the quality of the materials used to build highway construction projects. Some : materials are tested, some are accepted through a manufacturers certification of quality or compliance, some are physicall...

  3. Smart hydrogel functional materials

    CERN Document Server

    Chu, Liang-Yin; Ju, Xiao-Jie

    2014-01-01

    This book systematically introduces smart hydrogel functional materials with the configurations ranging from hydrogels to microgels. It serves as an excellent reference for designing and fabricating artificial smart hydrogel functional materials.

  4. Practical materials characterization

    CERN Document Server

    2014-01-01

    Presents cross-comparison between materials characterization techniquesIncludes clear specifications of strengths and limitations of each technique for specific materials characterization problemFocuses on applications and clear data interpretation without extensive mathematics

  5. Bridged graphite oxide materials

    Science.gov (United States)

    Herrera-Alonso, Margarita (Inventor); McAllister, Michael J. (Inventor); Aksay, Ilhan A. (Inventor); Prud'homme, Robert K. (Inventor)

    2010-01-01

    Bridged graphite oxide material comprising graphite sheets bridged by at least one diamine bridging group. The bridged graphite oxide material may be incorporated in polymer composites or used in adsorption media.

  6. Sustainable Materials Management

    Science.gov (United States)

    To introduce businesses, NGOs, and government officials to the concept of Sustainable Materials Management (SMM). To provide tools to allow stakeholders to take a lifecycle approach managing their materials, & to encourage them to join a SMM challenge.

  7. Injection Laryngoplasty Materials

    OpenAIRE

    Haldun Oðuz

    2013-01-01

    Injection laryngoplasty is one of the treatment options for voice problems. In the recent years, more safe and more biocompatible injection materials are available on the market. Long and short term injection materials are discussed in this review.

  8. Materials Science and Engineering |

    Science.gov (United States)

    Engineering? What Is Materials Science and Engineering? MSE combines engineering, physics and chemistry to solve problems in nanotechnology, biotechnology, information technology, energy, manufacturing, and more ,' which could replace steel. Materials Science and Mechanical Engineering Professors work together to

  9. Molecules to Materials

    Indian Academy of Sciences (India)

    the School of Chemistry, ... Design and fabrication of molecular materials combines ... insights into materials gained through condensed matter ... The most important characteristic of liquid crystals is that they exhibit fluid nature and at the same.

  10. Nanostructured composite reinforced material

    Science.gov (United States)

    Seals, Roland D [Oak Ridge, TN; Ripley, Edward B [Knoxville, TN; Ludtka, Gerard M [Oak Ridge, TN

    2012-07-31

    A family of materials wherein nanostructures and/or nanotubes are incorporated into a multi-component material arrangement, such as a metallic or ceramic alloy or composite/aggregate, producing a new material or metallic/ceramic alloy. The new material has significantly increased strength, up to several thousands of times normal and perhaps substantially more, as well as significantly decreased weight. The new materials may be manufactured into a component where the nanostructure or nanostructure reinforcement is incorporated into the bulk and/or matrix material, or as a coating where the nanostructure or nanostructure reinforcement is incorporated into the coating or surface of a "normal" substrate material. The nanostructures are incorporated into the material structure either randomly or aligned, within grains, or along or across grain boundaries.

  11. Supplements to Textbook Materials.

    Science.gov (United States)

    Holmes, Ken

    1994-01-01

    Describes the many kinds of materials that English teachers can draw upon to enrich and expand students' experiences with literature. Outlines ancillary materials used to supplement the study of William Shakespeare's "Julius Caesar." (HB)

  12. Bulletin of Materials Science

    Indian Academy of Sciences (India)

    Low temperature preparation of some perovskites La2MM'O6 (M,M'=Cr,Mn,Fe ... Inorganic materials for optical data storage -- S K Date ... Dielectric and polarization studies on some organic materials -- B jagannadh and Lalitha Sirdeshmukh.

  13. Erodibility of cemented materials

    CSIR Research Space (South Africa)

    Gass, BG

    1993-03-01

    Full Text Available The use of stabilised layers is cost effective in road construction in South Africa. Some stabilised materials have however been found to be susceptible to erosion. To identify erodible materials the Erosion Test was developed in 1989...

  14. Contact materials for nanoelectronics

    KAUST Repository

    Alshareef, Husam N.; Quevedo-Ló pez, Manuel Angel Quevedo; Majhi, Prashant

    2011-01-01

    In this article, we review current research activities in contact material development for electronic and nanoelectronic devices. A fundamental issue in contact materials research is to understand and control interfacial reactions and phenomena

  15. Materials Genome Initiative

    Science.gov (United States)

    Vickers, John

    2015-01-01

    The Materials Genome Initiative (MGI) project element is a cross-Center effort that is focused on the integration of computational tools to simulate manufacturing processes and materials behavior. These computational simulations will be utilized to gain understanding of processes and materials behavior to accelerate process development and certification to more efficiently integrate new materials in existing NASA projects and to lead to the design of new materials for improved performance. This NASA effort looks to collaborate with efforts at other government agencies and universities working under the national MGI. MGI plans to develop integrated computational/experimental/ processing methodologies for accelerating discovery and insertion of materials to satisfy NASA's unique mission demands. The challenges include validated design tools that incorporate materials properties, processes, and design requirements; and materials process control to rapidly mature emerging manufacturing methods and develop certified manufacturing processes

  16. Analysis of irradiated materials

    International Nuclear Information System (INIS)

    Bellamy, B.A.

    1988-01-01

    Papers presented at the UKAEA Conference on Materials Analysis by Physical Techniques (1987) covered a wide range of techniques as applied to the analysis of irradiated materials. These varied from reactor component materials, materials associated with the Authority's radwaste disposal programme, fission products and products associated with the decommissioning of nuclear reactors. An invited paper giving a very comprehensive review of Laser Ablation Microprobe Mass Spectroscopy (LAMMS) was included in the programme. (author)

  17. Fuels and auxiliary materials

    International Nuclear Information System (INIS)

    Svab, V.

    A brief survey is given of the problems of fuels, fuel cans, absorption and moderator materials proceeding from the papers presented at the 1971 4th Geneva Conference on the Peaceful Uses of Nuclear Energy and the 1970 IAEA Conference in New York. Attention is focused on the behaviour of fuel and fuel can materials for thermal and fast reactors during irradiation, radiation stability of absorption materials and the effects of radiation on concrete and on moderator materials. (Z.M.)

  18. Contributions to materials science

    International Nuclear Information System (INIS)

    Asbeck, O.W.; Matucha, K.H.

    1989-01-01

    The ten papers presented at a festive colloquium held on November 14, 1988 in Frankfurt to honour Prof. Peter Wincierz deal with the texture and mechanical anisotropy of zirconium alloys (by E. Tenckhoff), materials for cladding tubes (H. Boehm), aluminium materials achieved by near technology (W. Bunk), dispersion-strengthened materials (H. Fischmeister), materials for plain bearings (K.H. Matucha), and the archeometallurgy of copper (H.-G. Bachmann). (MM) [de

  19. Modern electronic materials

    CERN Document Server

    Watkins, John B

    2013-01-01

    Modern Electronic Materials focuses on the development of electronic components. The book first discusses the history of electronic components, including early developments up to 1900, developments up to World War II, post-war developments, and a comparison of present microelectric techniques. The text takes a look at resistive materials. Topics include resistor requirements, basic properties, evaporated film resistors, thick film resistors, and special resistors. The text examines dielectric materials. Considerations include basic properties, evaporated dielectric materials, ceramic dielectri

  20. Machinability of advanced materials

    CERN Document Server

    Davim, J Paulo

    2014-01-01

    Machinability of Advanced Materials addresses the level of difficulty involved in machining a material, or multiple materials, with the appropriate tooling and cutting parameters.  A variety of factors determine a material's machinability, including tool life rate, cutting forces and power consumption, surface integrity, limiting rate of metal removal, and chip shape. These topics, among others, and multiple examples comprise this research resource for engineering students, academics, and practitioners.

  1. Materials Genome Initiative Element

    Science.gov (United States)

    Vickers, John

    2015-01-01

    NASA is committed to developing new materials and manufacturing methods that can enable new missions with ever increasing mission demands. Typically, the development and certification of new materials and manufacturing methods in the aerospace industry has required more than 20 years of development time with a costly testing and certification program. To reduce the cost and time to mature these emerging technologies, NASA is developing computational materials tools to improve understanding of the material and guide the certification process.

  2. Advanced energy materials (Preface)

    Science.gov (United States)

    Titus, Elby; Ventura, João; Araújo, João Pedro; Campos Gil, João

    2017-12-01

    Advances in material science make it possible to fabricate the building blocks of an entirely new generation of hierarchical energy materials. Recent developments were focused on functionality and areas connecting macroscopic to atomic and nanoscale properties, where surfaces, defects, interfaces and metastable state of the materials played crucial roles. The idea is to combine both, the top-down and bottom-up approach as well as shape future materials with a blend of both the paradigms.

  3. Computing and Material

    DEFF Research Database (Denmark)

    Ramsgaard Thomsen, Mette; Tamke, Martin

    2013-01-01

    The digital is often said to bring us away from material. The adverse is true: digital design and fabrication grants new interfaces towards material and allows architectural design to engage with material on architectural scale in a way that is further reaching than ever before....

  4. Advances in dental materials.

    Science.gov (United States)

    Fleming, Garry J P

    2014-05-01

    The dental market is replete with new resorative materials marketed on the basis of novel technological advances in materials chemistry, bonding capability or reduced operator time and/or technique sensitivity. This paper aims to consider advances in current materials, with an emphasis on their role in supporting contemporary clinical practice.

  5. Transport of radioactive materials

    International Nuclear Information System (INIS)

    2013-01-01

    This ninth chapter presents de CNEN-NE--5.01 norm 'Transport of radioactive material'; the specifications of the radioactive materials for transport; the tests of the packages; the requests for controlling the transport and the responsibilities during the transport of radioactive material

  6. Materials for Space Exploration

    Science.gov (United States)

    Robertson, Luke B.; Williams, Martha

    2010-01-01

    Topics include a lab overview, testing and processing equipment, hemochromic hydrogen sensors, antimicrobial materials, wire system materials, CNT ink formulations, CNT ink dust screens, CNT ink printed circuitry, cryogenic materials development, fire and polymers, the importance of lighting, electric lighting systems, LED for plant growth, and carbon nanotube fiber filaments.

  7. Fusion reactor materials

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1989-01-01

    This paper discuses the following topics on fusion reactor materials: irradiation, facilities, test matrices, and experimental methods; dosimetry, damage parameters, and activation calculations; materials engineering and design requirements; fundamental mechanical behavior; radiation effects; development of structural alloys; solid breeding materials; and ceramics.

  8. Isotope research materials

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Preparation of research isotope materials is described. Topics covered include: separation of tritium from aqueous effluents by bipolar electrolysis; stable isotope targets and research materials; radioisotope targets and research materials; preparation of an 241 Am metallurgical specimen; reactor dosimeters; ceramic and cermet development; fission-fragment-generating targets of 235 UO 2 ; and wire dosimeters for Westinghouse--Bettis

  9. Fusion reactor materials

    International Nuclear Information System (INIS)

    1989-01-01

    This paper discuses the following topics on fusion reactor materials: irradiation, facilities, test matrices, and experimental methods; dosimetry, damage parameters, and activation calculations; materials engineering and design requirements; fundamental mechanical behavior; radiation effects; development of structural alloys; solid breeding materials; and ceramics

  10. Optimal Super Dielectric Material

    Science.gov (United States)

    2015-09-01

    plate capacitor will reduce the net field to an unprecedented extent. This family of materials can form materials with dielectric values orders of... Capacitor -Increase Area (A)............8 b. Multi-layer Ceramic Capacitor -Decrease Thickness (d) .......10 c. Super Dielectric Material-Increase...circuit modeling, from [44], and B) SDM capacitor charge and discharge ...................................................22 Figure 15. Dielectric

  11. Raw material versus processing

    International Nuclear Information System (INIS)

    Berg, E.A.T.

    1989-01-01

    Some brazilian aspects related with the obtainment of raw materials for advanced ceramic products are described. The necessity of import raw materials by the advanced ceramic industries is mentioned, generating dangerous depedence for the country. The brazilian mineral reserves for using in raw materials of advanced ceramic are also cited. (C.G.C.) [pt

  12. Chemicals in material cycles

    DEFF Research Database (Denmark)

    Pivnenko, Kostyantyn; Eriksson, Eva; Astrup, Thomas Fruergaard

    2015-01-01

    Material recycling has been found beneficial in terms of resource and energy performance and is greatly promoted throughout the world. A variety of chemicals is used in materials as additives and data on their presence is sparse. The present work dealt with paper as recyclable material and diisob...

  13. Materials science and architecture

    Science.gov (United States)

    Bechthold, Martin; Weaver, James C.

    2017-12-01

    Materiality — the use of various materials in architecture — has been fundamental to the design and construction of buildings, and materials science has traditionally responded to needs formulated by design, engineering and construction professionals. Material properties and processes are shaping buildings and influencing how they perform. The advent of technologies such as digital fabrication, robotics and 3D printing have not only accelerated the development of new construction solutions, but have also led to a renewed interest in materials as a catalyst for novel architectural design. In parallel, materials science has transformed from a field that explains materials to one that designs materials from the bottom up. The conflation of these two trends is giving rise to materials-based design research in which architects, engineers and materials scientists work as partners in the conception of new materials systems and their applications. This Review surveys this development for different material classes (wood, ceramics, metals, concrete, glass, synthetic composites and polymers), with an emphasis on recent trends and innovations.

  14. Cathodoluminescence | Materials Science | NREL

    Science.gov (United States)

    shown on a computer screen; the image of a sample semiconductor material appears as a striated oval material sample shown above; the image is a high-contrast light and dark oval on a dark background and was top left of copper indium gallium selenide semiconductor material sample; the image is shown on a

  15. Tailored Porous Materials

    Energy Technology Data Exchange (ETDEWEB)

    BARTON,THOMAS J.; BULL,LUCY M.; KLEMPERER,WALTER G.; LOY,DOUGLAS A.; MCENANEY,BRIAN; MISONO,MAKOTO; MONSON,PETER A.; PEZ,GUIDO; SCHERER,GEORGE W.; VARTULI,JAMES C.; YAGHI,OMAR M.

    1999-11-09

    Tailoring of porous materials involves not only chemical synthetic techniques for tailoring microscopic properties such as pore size, pore shape, pore connectivity, and pore surface reactivity, but also materials processing techniques for tailoring the meso- and the macroscopic properties of bulk materials in the form of fibers, thin films and monoliths. These issues are addressed in the context of five specific classes of porous materials: oxide molecular sieves, porous coordination solids, porous carbons, sol-gel derived oxides, and porous heteropolyanion salts. Reviews of these specific areas are preceded by a presentation of background material and review of current theoretical approaches to adsorption phenomena. A concluding section outlines current research needs and opportunities.

  16. Fusion Reactor Materials

    International Nuclear Information System (INIS)

    Decreton, M.

    2002-01-01

    The objective of SCK-CEN's programme on fusion reactor materials is to contribute to the knowledge on the radiation-induced behaviour of fusion reactor materials and components as well as to help the international community in building the scientific and technical basis needed for the construction of the future reactor. Ongoing projects include: the study of the mechanical and chemical (corrosion) behaviour of structural materials under neutron irradiation and water coolant environment; the investigation of the characteristics of irradiated first wall material such as beryllium; investigations on the management of materials resulting from the dismantling of fusion reactors including waste disposal. Progress and achievements in these areas in 2001 are discussed

  17. Advances in electronic materials

    CERN Document Server

    Kasper, Erich; Grimmeiss, Hermann G

    2008-01-01

    This special-topic volume, Advances in Electronic Materials, covers various fields of materials research such as silicon, silicon-germanium hetero-structures, high-k materials, III-V semiconductor alloys and organic materials, as well as nano-structures for spintronics and photovoltaics. It begins with a brief summary of the formative years of microelectronics; now the keystone of information technology. The latter remains one of the most important global technologies, and is an extremely complex subject-area. Although electronic materials are primarily associated with computers, the internet

  18. New materials in defence

    International Nuclear Information System (INIS)

    Khan, Sikandar S.; Khan, Shahid A.; Butt, N.M.

    1992-01-01

    National defence is very important and always needs new such materials which have technological and socio-economic development of human society. The types of materials used by a society reflect its level of sophistication. These modern materials are basically the same conventional materials but with a greater knowledge content which include superalloys, modern polymers, engineering ceramics and the advanced composite. The production and use of new materials is playing and important role in the recent development in the defence industry. (A.B.)

  19. Advanced Industrial Materials Program

    Science.gov (United States)

    Stooksbury, F.

    1994-06-01

    The mission of the Advanced Industrial Materials (AIM) program is to commercialize new/improved materials and materials processing methods that will improve energy efficiency, productivity, and competitiveness. Program investigators in the DOE national laboratories are working with about 100 companies, including 15 partners in CRDA's. Work is being done on intermetallic alloys, ceramic composites, metal composites, polymers, engineered porous materials, and surface modification. The program supports other efforts in the Office of Industrial Technologies to assist the energy-consuming process industries. The aim of the AIM program is to bring materials from basic research to industrial application to strengthen the competitive position of US industry and save energy.

  20. Methods of materiality

    DEFF Research Database (Denmark)

    Aagaard, Jesper; Matthiesen, Noomi Christine Linde

    2016-01-01

    that researchers should start paying attention to the material world (consisting of both human bodies and material objects) and what it means for how people live their lives. It is argued that this can be done by incorporating the concept of material presence to capture embodied and material layers of existence......This article challenges the hegemonic status of “language” as the primary substance of qualitative research in psychology, whether through interviews or recordings of naturally occurring talk. It thereby questions the overt focus on analyzing linguistic “meaning.” Instead, it is suggested...... practical guidelines for incorporating attention to materiality in qualitative research....

  1. Modelling of thermoelectric materials

    DEFF Research Database (Denmark)

    Bjerg, Lasse

    In order to discover new good thermoelectric materials, there are essentially two ways. One way is to go to the laboratory, synthesise a new material, and measure the thermoelectric properties. The amount of compounds, which can be investigated this way is limited because the process is time...... consuming. Another approach is to model the thermoelectric properties of a material on a computer. Several crystal structures can be investigated this way without use of much man power. I have chosen the latter approach. Using density functional theory I am able to calculate the band structure of a material....... This band structure I can then use to calculate the thermoelectric properties of the material. With these results I have investigated several materials and found the optimum theoretical doping concentration. If materials with these doping concentrations be synthesised, considerably better thermoelectric...

  2. IAEA biological reference materials

    International Nuclear Information System (INIS)

    Parr, R.M.; Schelenz, R.; Ballestra, S.

    1988-01-01

    The Analytical Quality Control Services programme of the IAEA encompasses a wide variety of intercomparisons and reference materials. This paper reviews only those aspects of the subject having to do with biological reference materials. The 1988 programme foresees 13 new intercomparison exercises, one for major, minor and trace elements, five for radionuclides, and seven for stable isotopes. Twenty-two natural matrix biological reference materials are available: twelve for major, minor and trace elements, six for radionuclides, and four for chlorinated hydrocarbons. Seven new intercomparisons and reference materials are in preparation or under active consideration. Guidelines on the correct use of reference materials are being prepared for publication in 1989 in consultation with other major international producers and users of biological reference materials. The IAEA database on available reference materials is being updated and expanded in scope, and a new publication is planned for 1989. (orig.)

  3. Articulating Material Criteria

    DEFF Research Database (Denmark)

    Hasling, Karen Marie

    2013-01-01

    , imitate and articulate the students’ inclusion of materials. This paper particularly discusses the experiences made and ideas generated after the execution of a material science course for second year students, with emphasis on the concept of the material selection matrix as an educational tool......This paper discusses the experiences and potentials with materials teaching at the Institute for Product Design at Kolding School of Design, using materials teaching as experiments in my PhD project. The project intents to create a stronger material awareness among product design students...... with emphasis on sustainability. The experiments aim to develop an understanding of, how product design students include materials in their design practice and how tools can be developed that further enhance this. Hence experiments are essential for the progress of the PhD project as they help to observe...

  4. Contact materials for nanoelectronics

    KAUST Repository

    Alshareef, Husam N.

    2011-02-01

    In this article, we review current research activities in contact material development for electronic and nanoelectronic devices. A fundamental issue in contact materials research is to understand and control interfacial reactions and phenomena that modify the expected device performance. These reactions have become more challenging and more difficult to control as new materials have been introduced and as device sizes have entered the deep nanoscale. To provide an overview of this field of inquiry, this issue of MRS Bulletin includes articles on gate and contact materials for Si-based devices, junction contact materials for Si-based devices, and contact materials for alternate channel substrates (Ge and III-V), nanodevices. © 2011 Materials Research Society.

  5. Comprehensive hard materials

    CERN Document Server

    2014-01-01

    Comprehensive Hard Materials deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds. Articles include the technologies of powder production (including their precursor materials), milling, granulation, cold and hot compaction, sintering, hot isostatic pressing, hot-pressing, injection moulding, as well as on the coating technologies for refractory metals, hard metals and hard materials. The characterization, testing, quality assurance and applications are also covered. Comprehensive Hard Materials provides meaningful insights on materials at the leading edge of technology. It aids continued research and development of these materials and as such it is a critical information resource to academics and industry professionals facing the technological challenges of the future. Hard materials operate at the leading edge of technology, and continued res...

  6. Multicomponent polymeric materials

    CERN Document Server

    Thomas, Sabu; Saha, Prosenjit

    2016-01-01

    The book offers an in-depth review of the materials design and manufacturing processes employed in the development of multi-component or multiphase polymer material systems. This field has seen rapid growth in both academic and industrial research, as multiphase materials are increasingly replacing traditional single-component materials in commercial applications. Many obstacles can be overcome by processing and using multiphase materials in automobile, construction, aerospace, food processing, and other chemical industry applications. The comprehensive description of the processing, characterization, and application of multiphase materials presented in this book offers a world of new ideas and potential technological advantages for academics, researchers, students, and industrial manufacturers from diverse fields including rubber engineering, polymer chemistry, materials processing and chemical science. From the commercial point of view it will be of great value to those involved in processing, optimizing an...

  7. Matter and materials

    International Nuclear Information System (INIS)

    Lefevre, J.

    1997-01-01

    This paper is an introduction to the materials used in nuclear engineering from the uranium (extraction, processing, ultimate use) to all radioactive products encountered in nuclear processes and more particularly those having particular applications or presenting particular risks in their ultimate disposal. This introduction gives a general presentation of the different topics which are developed in other chapters: nuclear materials and fuel cycle (fuel fabrication, actinides and recycling, direct storage and reprocessing of spent fuels, management of radioactive wastes, transport of radioactive materials, production and use of radioelements in the industry and medicine), moderators and coolants, other materials used in reactors (fuel cladding materials, special steels, zircaloy, neutron absorbent materials), and the mechanical behaviour of materials (steels, concretes). (J.S.)

  8. Superconductors and electrotechnical materials

    Energy Technology Data Exchange (ETDEWEB)

    Stanculescu, V

    1975-07-01

    A description is given of the properties of superconducting materials and of other materials which will be used in low temperature electrical engineering. The electrical and magnetic properties of type 1 or soft and type 2 or hard superconducting materials are analyzed. Electroinsulating and magnetic materials at low temperatures are also surveyed. Emphasis is placed on gaseous and fluid dielectric substances which retain their condition of physical aggregation at low temperatures and provide a cryogenic medium. These include helium, hydrogen, and nitrogen. As for solid dielectrics, satisfactory electroinsulating materials in terms of mechanical and electrical properties include the category of thermoplastic organic materials such as mylar, teflon, kapton, and nylon. It is also emphasized that cryoelectrical engineering requires magnetic materials with high magnetic induction at low temperatures, coercive field and low magnetic loss.

  9. Comprehensive nuclear materials

    CERN Document Server

    Allen, Todd; Stoller, Roger; Yamanaka, Shinsuke

    2012-01-01

    Comprehensive Nuclear Materials encapsulates a panorama of fundamental information on the vast variety of materials employed in the broad field of nuclear technology. The work addresses, in five volumes, 3,400 pages and over 120 chapter-length articles, the full panorama of historical and contemporary international research in nuclear materials, from Actinides to Zirconium alloys, from the worlds' leading scientists and engineers. It synthesizes the most pertinent research to support the selection, assessment, validation and engineering of materials in extreme nuclear environments. The work discusses the major classes of materials suitable for usage in nuclear fission, fusion reactors and high power accelerators, and for diverse functions in fuels, cladding, moderator and control materials, structural, functional, and waste materials.

  10. Biological materials: a materials science approach.

    Science.gov (United States)

    Meyers, Marc A; Chen, Po-Yu; Lopez, Maria I; Seki, Yasuaki; Lin, Albert Y M

    2011-07-01

    The approach used by Materials Science and Engineering is revealing new aspects in the structure and properties of biological materials. The integration of advanced characterization, mechanical testing, and modeling methods can rationalize heretofore unexplained aspects of these structures. As an illustration of the power of this methodology, we apply it to biomineralized shells, avian beaks and feathers, and fish scales. We also present a few selected bioinspired applications: Velcro, an Al2O3-PMMA composite inspired by the abalone shell, and synthetic attachment devices inspired by gecko. Copyright © 2010 Elsevier Ltd. All rights reserved.

  11. Management report 2007 CNEN - Brazilian Nuclear Energy Commission; Relatorio de gestao 2007 CNEN - Comissao Nacional de Energia Nuclear

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    This document reports the general activity management of the Comissao Nacional de Energia Nuclear - CNEN - Brazil during the year of 2007, involving the CNEN role in the public policy execution, the Brazilian program of nuclear activities in the areas of nuclear safety, research and development, radiopharmaceutical production, teaching, administration in general and miscellaneous.

  12. Brazilian energy balance 2011 - year 2010. Final report; Balanco energetico nacional 2011 - ano base 2010. Relatorio final

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The Brazilian energy balance - BEB - is divided into eight chapters and ten annexes, whose contents are as follow: chapter 1 - Energy Analysis and Aggregated Data - presents energy highlights per source in 2010 and analyses the evolution of the internal offer of energy and its relationship with economic growth in 2010; chapter 2 - Energy Supply and Demand by Source - has the accountancy, per primary and secondary energy sources, of the production, import, export, variation of stocks, losses, adjustments, desegregated total per socioeconomic sector in the country; chapter 3 - Energy Consumption by Sector - presents the final energy consumption classified by primary and secondary source for each sector of the economy; chapter 4 - Energy Imports and Exports - presents the evolution of the data on the import and export of energy and the dependence on external energy; chapter 5 - Balance of Transformation Centers - presents the energy balances for the energy transformation centers including their losses; chapter 6 - Energy Resources and Reserves - has the basic concepts use in the survey of resources and reserves of primary energy sources, with the evolution of the data from 1974 to 2010, through graphs and tables; chapter 7 - Energy and Socioeconomics - contains a comparison of energy, economic and population parameters, specific consumption, energy intensities, average prices and spending on petroleum imports; chapter 8 - State Energy Data - presents energy data for the states by Federal Unit, main energy source production, energy installations, reserves and hydraulic potential. (author)

  13. Study renewable energy - sugarcane ethanol. Traditional areas. Final report; Estudo energias renovaveis - etanol de cana. Areas tradicionais. Relatorio final

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This report presents the mapping of areas with potential for ethanol production in traditional areas of the Brazil. In the traditional areas, with clear emphasis in the Northeast region of Brazil, was selected ten areas in the states of Bahia, Sergipe, Alagoas, Pernambuco, Paraiba, Rio Grande do Norte and Ceara. In the Southeast region two areas, between the Norte Fluminense, Southern of the Espirito Santo and eastern of the Minas Gerais.

  14. Management report 2004 CNEN - Brazilian Nuclear Energy Commission; Relatorio de gestao 2004 CNEN - Comissao Nacional de Energia Nuclear

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-03-15

    This document reports the results of the activity management of the Comissao Nacional de Energia Nuclear - CNEN - Brazil during the year of 2004, involving the Brazilian program of nuclear activities in the areas of nuclear safety, research and development, radiopharmaceutical production, institutional management, teaching, administration in general and miscellaneous.

  15. Management report 2003 CNEN - Brazilian Nuclear Energy Commission; Relatorio de gestao 2003 CNEN - Comissao Nacional de Energia Nuclear

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-03-15

    This document reports the general activity management of the Comissao Nacional de Energia Nuclear - CNEN - Brazil during the year of 2003, involving the government programs in the areas of nuclear safety, medicine application, technological development, administration and miscellaneous.

  16. Brazilian energy balance 2014 - calendar year 2013: final report; Balanco energetico nacional 2014 - ano base 2013: relatorio final

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-08-01

    The BEB is divided into eight chapters and ten annexes, whose contents are as follow: Chapter 1- Energy analysis and aggregated data- presents energy highlights per source in 2012 and analyses the evolution of the domestic energy supply and its relationship with economic growth in 2013; Chapter 2- Energy supply and demand by source- has the accountancy, per primary and secondary energy sources, of the production, import, export, variation of stocks, losses, adjustments, disaggregated total per socioeconomic sector in the country; Chapter 3- Energy consumption by sector- presents the final energy consumption classified by primary and secondary source for each sector of the economy; Chapter 4- Energy imports and exports- presents the evolution of the data on the import and export of energy and the dependence on external energy; Chapter 5- Balance of transformation centers- presents the energy balances for the energy transformation centers including their losses; Chapter 6- Energy resources and reserves- has the basic concepts use in the survey of resources and reserves of primary energy sources; Chapter 7- Energy and socioeconomics- contains a comparison of energy, economic and population parameters, specific consumption, energy intensities, average prices and spending on petroleum imports; Chapter 8- State energy data- presents energy data for the states by Federal Unit, main energy source production, energy installations, reserves and hydraulic potential; Relating to annexes the current structure is presented bellow: Annex 1- Installed capacity- shows the installed capacity of electricity generation, the installed capacity of Itaipu hydro plant and the installed capacity for oil refining.; Annex 2- Self-production of electricity- presents disaggregated data of self-production, considering sources and sectors. Annex 3- World energy data- presents the main indicators for the production, import, export and consumption per energy source and region; Annex 4- Useful energy balance- presents energy assessments related to useful energy, relevant concept for energy efficiency evolution; Annex 5- General structure of the BEB- espouses the conception and the composition of the National Energy Balance; Annex 6-Treatment of information- lists the sources of data for the BEB and methodological particularities in their treatment; Annex 7- Units- gives the conception for the measurement units of BEB data; Annex 8- Conversion factors- presents the factors used in BEB and conditions for their utilization; Annex 9- Consolidated energy balances- contains the BEB consolidation matrixes with energy flows for primary and secondary sources expressed in tons oil equivalent (toe); Annex 10- Energy balance 2014- presents the detailed energy accounting for Brazil in 2013, expressed in usual units.

  17. Brazilian energy balance 2015: year 2014 - final report; Balanco energetico nacional 2015: ano base 2014 - relatorio final

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-07-01

    The Balance (BEB) contains the accounting relative to energy supply and consumption, as well the conversion processes and foreign trade. It presents in a single document the historical series of these operations and information about reserves, installed capacities and Federal States data. The BEB is divided into eight chapters and ten annexes, whose contents are as follow. Chapters' content can be described as follows: Chapter 1 - Energy Analysis and Aggregated Data - presents energy highlights per source in 2014 and analyses the evolution of the domestic energy supply and its relationship with economic growth. Chapter 2 - Energy Supply and Demand by Source - has the accountancy, per primary and secondary energy sources, of the production, import, export, variation of stocks, losses, adjustments, disaggregated total per socioeconomic sector in the country. Chapter 3 - Energy Consumption by Sector - presents the final energy consumption classified by primary and secondary source for each sector of the economy. Chapter 4 - Energy Imports and Exports - presents the evolution of the data on the import and export of energy and the dependence on external energy. Chapter 5 - Balance of Transformation Centers - presents the energy balances for the energy transformation centers including their losses. Chapter 6 - Energy Resources and Reserves - has the basic concepts use in the survey of resources and reserves of primary energy sources. Chapter 7 - Energy and Socio economics - contains a comparison of energy, economic and population parameters, specific consumption, energy intensities, average prices and spending on petroleum imports. Chapter 8 - State Energy Data - presents energy data for the states by Federal Unit, main energy source production, energy installations, reserves and hydraulic potential. Relating to annexes the current structure is presented bellow: Annex I - Installed Capacity - shows the installed capacity of electricity generation, the installed capacity of Itaipu hydro plant and the installed capacity for oil refining. Annex II - Self-production of Electricity - presents disaggregated data of self-production, considering sources and sectors. Annex III - World Energy Data - presents the main indicators for the production, import, export and consumption per energy source and region. Annex IV - Useful Energy Balance - presents energy assessments related to useful energy, relevant concept for energy efficiency evolution. (author)

  18. Applied nuclear physics group - activities report. 1977-1997; Grupo de fisica nuclear aplicada - relatorio de atividades. 1977-1997

    Energy Technology Data Exchange (ETDEWEB)

    Appoloni, Carlos Roberto

    1998-06-01

    This report presents the activities conducted by the Applied Nuclear Physics group of the Londrina State University - Applied Nuclear Physics Laboratory - Brazil, from the activities beginning (1977) up to the end of the year 1997.

  19. Brazilian energy balance 2013 - calendar year 2012: final report; Balanco energetico nacional 2013 - ano base 2012: relatorio final

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-07-01

    The BEB is divided into eight chapters and ten annexes, whose contents are as follow: Chapter 1- Energy analysis and aggregated data- presents energy highlights per source in 2012 and analyses the evolution of the domestic energy supply and its relationship with economic growth in 2012; Chapter 2- Energy supply and demand by source- has the accountancy, per primary and secondary energy sources, of the production, import, export, variation of stocks, losses, adjustments, disaggregated total per socioeconomic sector in the country; Chapter 3- Energy consumption by sector- presents the final energy consumption classified by primary and secondary source for each sector of the economy; Chapter 4- Energy imports and exports- presents the evolution of the data on the import and export of energy and the dependence on external energy; Chapter 5- Balance of transformation centers- presents the energy balances for the energy transformation centers including their losses; Chapter 6- Energy resources and reserves- has the basic concepts use in the survey of resources and reserves of primary energy sources; Chapter 7- Energy and socioeconomics- contains a comparison of energy, economic and population parameters, specific consumption, energy intensities, average prices and spending on petroleum imports; Chapter 8- State energy data- presents energy data for the states by Federal Unit, main energy source production, energy installations, reserves and hydraulic potential; Relating to annexes the current structure is presented bellow: Annex 1- Installed capacity- shows the installed capacity of electricity generation, the installed capacity of Itaipu hydro plant and the installed capacity for oil refining; Annex 2- Self-production of electricity- presents disaggregated data of self-production, considering sources and sectors. Annex 3- World energy data- presents the main indicators for the production, import, export and consumption per energy source and region; Annex 4- Useful energy balance- presents energy assessments related to useful energy, relevant concept for energy efficiency evolution; Annex 5- General structure of the BEB- espouses the conception and the composition of the National Energy Balance; Annex 6-Treatment of information- lists the sources of data for the BEB and methodological particularities in their treatment; Annex 7- Units- gives the conception for the measurement units of BEB data; Annex 8- Conversion factors- presents the factors used in BEB and conditions for their utilization; Annex 9- Consolidated energy balances- contains the BEB consolidation matrixes with energy flows for primary and secondary sources expressed in tons oil equivalent (toe); Annex 10- Energy balance 2013- presents the detailed energy accounting for Brazil in 2012, expressed in usual units.

  20. Management report 2005 CNEN - Brazilian Nuclear Energy Commission; Relatorio de gestao 2005 CNEN - Comissao Nacional de Energia Nuclear

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-03-15

    This document reports the results of the activity management of the Comissao Nacional de Energia Nuclear - CNEN - Brazil during the year of 2005, involving the Brazilian program of nuclear activities in the areas of nuclear safety, research and development, radiopharmaceutical production, institutional management, teaching, administration in general and miscellaneous.

  1. Management report 2006 CNEN - Brazilian Nuclear Energy Commission; Relatorio de gestao 2006 CNEN - Comissao Nacional de Energia Nuclear

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-03-15

    This document reports the results of the activity management of the Comissao Nacional de Energia Nuclear - CNEN - Brazil during the year of 2005, involving the Brazilian program of nuclear activities in the areas of nuclear safety, research and development, radiopharmaceutical production, institutional management, teaching, administration in general and miscellaneous.

  2. Materials 2014: a great success for materials sector

    International Nuclear Information System (INIS)

    Isnard, Olivier; Crepin, Jerome

    2014-01-01

    In this work are presented the summaries of the 19 symposiums presented at the conference: 'Materials 2014' and whose topics were: eco-materials, materials for energy storage and conversion, strategic materials, rare elements and recycling, surfaces functionalization and physico-chemical characterization, interfaces and coatings, corrosion, aging, durability, damage mechanical behaviours, disordered materials, glasses and their functionalization, materials and health, functional materials, porous, granular and with a high surface area materials, nano-materials, nano-structured systems, assembling processes, carbonaceous materials, great instruments and studies of materials, materials in severe conditions, powder forming processes, metallic materials and structures lightening. (O.M.)

  3. The Time of Materiality

    Directory of Open Access Journals (Sweden)

    Estrid Sørensen

    2007-01-01

    Full Text Available While time and space form a classic duality in social science, this article demonstrates a perspective on time, space and materiality as a core trinity. As a prominent figure in contemporary discussions on materiality in the social sciences Science and Technology Studies (STS emphasizes relational approaches. STS however lacks a clear relational definition of materiality and tends instead to focus on the agency of entities, on for instance material agency. The article suggests a relational definition of materiality and notes that this move implies turning the question of the time of materiality into an empirical question. It is argued that relational materiality must be studied spatially, and thus a spatial approach describing patterns of relations is presented. Based on field work in a primary school classroom and computer lab, three materials are analyzed: the blackboard, a bed-loft and an online 3D virtual environment. The empirical descriptions depict three different materialities, and it is shown how time is formed differently in each of them. Time, it is argued, is an emergent and characterizing aspect of materialities as spatial formations. URN: urn:nbn:de:0114-fqs070122

  4. Ceramic piezoelectric materials

    International Nuclear Information System (INIS)

    Kaszuwara, W.

    2004-01-01

    Ceramic piezoelectric materials conert reversibility electric energy into mechanical energy. In the presence of electric field piezoelectric materials exhibit deformations up to 0.15% (for single crystals up to 1.7%). The deformation energy is in the range of 10 2 - 10 3 J/m 3 and working frequency can reach 10 5 Hz. Ceramic piezoelectric materials find applications in many modern disciplines such as: automatics, micromanipulation, measuring techniques, medical diagnostics and many others. Among the variety of ceramic piezoelectric materials the most important appear to be ferroelectric materials such as lead zirconate titanate so called PZT ceramics. Ceramic piezoelectric materials can be processed by methods widely applied for standard ceramics, i.e. starting from simple precursors e.g. oxides. Application of sol-gel method has also been reported. Substantial drawback for many applications of piezoelectric ceramics is their brittleness, thus much effort is currently being put in the development of piezoelectric composite materials. Other important research directions in the field of ceramic piezoelectric materials composite development of lead free materials, which can exhibit properties similar to the PZT ceramics. Among other directions one has to state processing of single crystals and materials having texture or gradient structure. (author)

  5. Uranium reference materials

    International Nuclear Information System (INIS)

    Donivan, S.; Chessmore, R.

    1987-07-01

    The Technical Measurements Center has prepared uranium mill tailings reference materials for use by remedial action contractors and cognizant federal and state agencies. Four materials were prepared with varying concentrations of radionuclides, using three tailings materials and a river-bottom soil diluent. All materials were ground, dried, and blended thoroughly to ensure homogeneity. The analyses on which the recommended values for nuclides in the reference materials are based were performed, using independent methods, by the UNC Geotech (UNC) Chemistry Laboratory, Grand Junction, Colorado, and by C.W. Sill (Sill), Idaho National Engineering Laboratory, Idaho Falls, Idaho. Several statistical tests were performed on the analytical data to characterize the reference materials. Results of these tests reveal that the four reference materials are homogeneous and that no large systematic bias exists between the analytical methods used by Sill and those used by TMC. The average values for radionuclides of the two data sets, representing an unbiased estimate, were used as the recommended values for concentrations of nuclides in the reference materials. The recommended concentrations of radionuclides in the four reference materials are provided. Use of these reference materials will aid in providing uniform standardization among measurements made by remedial action contractors. 11 refs., 9 tabs

  6. Computational materials design

    International Nuclear Information System (INIS)

    Snyder, R.L.

    1999-01-01

    Full text: Trial and error experimentation is an extremely expensive route to the development of new materials. The coming age of reduced defense funding will dramatically alter the way in which advanced materials have developed. In the absence of large funding we must concentrate on reducing the time and expense that the R and D of a new material consumes. This may be accomplished through the development of computational materials science. Materials are selected today by comparing the technical requirements to the materials databases. When existing materials cannot meet the requirements we explore new systems to develop a new material using experimental databases like the PDF. After proof of concept, the scaling of the new material to manufacture requires evaluating millions of parameter combinations to optimize the performance of the new device. Historically this process takes 10 to 20 years and requires hundreds of millions of dollars. The development of a focused set of computational tools to predict the final properties of new materials will permit the exploration of new materials systems with only a limited amount of materials characterization. However, to bound computational extrapolations, the experimental formulations and characterization will need to be tightly coupled to the computational tasks. The required experimental data must be obtained by dynamic, in-situ, very rapid characterization. Finally, to evaluate the optimization matrix required to manufacture the new material, very rapid in situ analysis techniques will be essential to intelligently monitor and optimize the formation of a desired microstructure. Techniques and examples for the rapid real-time application of XRPD and optical microscopy will be shown. Recent developments in the cross linking of the world's structural and diffraction databases will be presented as the basis for the future Total Pattern Analysis by XRPD. Copyright (1999) Australian X-ray Analytical Association Inc

  7. Heterogeneous Materials I and Heterogeneous Materials II

    International Nuclear Information System (INIS)

    Knowles, K M

    2004-01-01

    In these two volumes the author provides a comprehensive survey of the various mathematically-based models used in the research literature to predict the mechanical, thermal and electrical properties of hetereogeneous materials, i.e., materials containing two or more phases such as fibre-reinforced polymers, cast iron and porous ceramic kiln furniture. Volume I covers linear properties such as linear dielectric constant, effective electrical conductivity and elastic moduli, while Volume II covers nonlinear properties, fracture and atomistic and multiscale modelling. Where appropriate, particular attention is paid to the use of fractal geometry and percolation theory in describing the structure and properties of these materials. The books are advanced level texts reflecting the research interests of the author which will be of significant interest to research scientists working at the forefront of the areas covered by the books. Others working more generally in the field of materials science interested in comparing predictions of properties with experimental results may well find the mathematical level quite daunting initially, as it is apparent that the author assumes a level of mathematics consistent with that taught in final year undergraduate and graduate theoretical physics courses. However, for such readers it is well worth persevering because of the in-depth coverage to which the various models are subjected, and also because of the extensive reference lists at the back of both volumes which direct readers to the various source references in the scientific literature. Thus, for the wider materials science scientific community the two volumes will be a valuable library resource. While I would have liked to see more comparison with experimental data on both ideal and 'real' heterogeneous materials than is provided by the author and a discussion of how to model strong nonlinear current--voltage behaviour in systems such as zinc oxide varistors, my overall

  8. Micromechanics of hierarchical materials

    DEFF Research Database (Denmark)

    Mishnaevsky, Leon, Jr.

    2012-01-01

    A short overview of micromechanical models of hierarchical materials (hybrid composites, biomaterials, fractal materials, etc.) is given. Several examples of the modeling of strength and damage in hierarchical materials are summarized, among them, 3D FE model of hybrid composites...... with nanoengineered matrix, fiber bundle model of UD composites with hierarchically clustered fibers and 3D multilevel model of wood considered as a gradient, cellular material with layered composite cell walls. The main areas of research in micromechanics of hierarchical materials are identified, among them......, the investigations of the effects of load redistribution between reinforcing elements at different scale levels, of the possibilities to control different material properties and to ensure synergy of strengthening effects at different scale levels and using the nanoreinforcement effects. The main future directions...

  9. Radiation protecting clothing materials

    International Nuclear Information System (INIS)

    Mio, Kotaro; Ijiri, Yasuo.

    1986-01-01

    Purpose: To provide radiation protecting clothing materials excellent in mechanical strength, corrosion resistance, flexibility and flexing strength. Constitution: The radiation protecting clothing materials according to this invention has pure lead sheets comprising a thin pure lead foil of 50 to 150 μm and radiation resistant organic materials, for example, polyethylene with high neutron shielding effect disposed to one or both surfaces thereof. The material are excellent in the repeating bending fatigue and mechanical strength, corrosion resistance and flexibility and, accordingly, radiation protecting clothings prepared by using them along or laminating them also possess these excellent characteristics. Further, they are excellent in the handlability, particularly, durability to the repeated holding and extension, as well as are preferable in the physical movability and feeling upon putting. The clothing materials may be cut into an appropriate size, or stitched into clothings made by radiation-resistant materials. In this case, pure lead sheets are used in lamination. (Horiuchi, T.)

  10. Ultrasonic nondestructive materials characterization

    Science.gov (United States)

    Green, R. E., Jr.

    1986-01-01

    A brief review of ultrasonic wave propagation in solid materials is presented with consideration of the altered behavior in anisotropic and nonlinear elastic materials in comparison with isotropic and linear elastic materials. Some experimental results are described in which ultrasonic velocity and attenuation measurements give insight into materials microstructure and associated mechanical properties. Recent developments with laser beam non-contact generation and detection of ultrasound are presented. The results of several years of experimental measurements using high-power ultrasound are discussed, which provide substantial evidence of the inability of presently accepted theories to fully explain the interaction of ultrasound with solid materials. Finally, a special synchrotron X-ray topographic system is described which affords the possibility of observing direct interaction of ultrasonic waves with the microstructural features of real crystalline solid materials for the first time.

  11. Hysteresis in Magnetocaloric Materials

    DEFF Research Database (Denmark)

    von Moos, Lars

    , obtained at the initial low and final high field. However, in first order materials thermal entropy hysteresis loops are obtained through characterization, corresponding to measurements done in an increasing and a decreasing temperature mode. Indirectly determining the MCE through the use of the Maxwell...... order materials, taking the magnetic and thermal history dependence of material properties into account, as well as the heat production due to hysteretic losses. MnFe(P,As) and Gd5Si2Ge2 compounds are modelled and it is found that the Preisach approach is suitable to reproduce material behavior in both......In this thesis the effects of hysteresis on magnetocaloric material properties and their performance in magnetic refrigeration devices are investigated. This is done through an experimental and model study of first order magnetocaloric materials MnFe(P,As) and Gd5Si2Ge2. The experimental...

  12. Fusion reactor materials

    International Nuclear Information System (INIS)

    Rowcliffe, A.F.; Burn, G.L.; Knee', S.S.; Dowker, C.L.

    1994-02-01

    This is the fifteenth in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following progress reports: Alloy Development for Irradiation Performance; Damage Analysis and Fundamental Studies; Special purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the U.S. Department of Energy. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide

  13. Skateboard deck materials selection

    Science.gov (United States)

    Liu, Haoyu; Coote, Tasha; Aiolos; Charlie

    2018-03-01

    The goal of this project was to identify the ideal material for a skateboard deck under 200 in price, minimizing the weight. The material must have a fracture toughness of 5 MPa/m2, have a minimum lifetime of 10, 000 cycles and must not experience brittle fracture. Both single material and hybrid solutions were explored. When further selecting to minimize weight, woods were found to be the best material. Titanium alloy-wood composites were explored to determine the optimal percentage composition of each material.A sandwich panel hybrid of 50% titanium alloy and 50% wood (Ti-Wood) was found to be the optimum material, performing better than the currently used plywood.

  14. Characterization of dielectric materials

    Energy Technology Data Exchange (ETDEWEB)

    King, Danny J.; Babinec, Susan; Hagans, Patrick L.; Maxey, Lonnie C.; Payzant, Edward A.; Daniel, Claus; Sabau, Adrian S.; Dinwiddie, Ralph B.; Armstrong, Beth L.; Howe, Jane Y.; Wood, III, David L.; Nembhard, Nicole S.

    2017-06-27

    A system and a method for characterizing a dielectric material are provided. The system and method generally include applying an excitation signal to electrodes on opposing sides of the dielectric material to evaluate a property of the dielectric material. The method can further include measuring the capacitive impedance across the dielectric material, and determining a variation in the capacitive impedance with respect to either or both of a time domain and a frequency domain. The measured property can include pore size and surface imperfections. The method can still further include modifying a processing parameter as the dielectric material is formed in response to the detected variations in the capacitive impedance, which can correspond to a non-uniformity in the dielectric material.

  15. Auditing nuclear materials statements

    International Nuclear Information System (INIS)

    Anon.

    1973-01-01

    A standard that may be used as a guide for persons making independent examinations of nuclear materials statements or reports regarding inventory quantities on hand, receipts, production, shipment, losses, etc. is presented. The objective of the examination of nuclear materials statements by the independent auditor is the expression of an opinion on the fairness with which the statements present the nuclear materials position of a nuclear materials facility and the movement of such inventory materials for the period under review. The opinion is based upon an examination made in accordance with auditing criteria, including an evaluation of internal control, a test of recorded transactions, and a review of measured discards and materials unaccounted for (MUF). The standard draws heavily upon financial auditing standards and procedures published by the American Institute of Certified Public Accountants

  16. Basic Electromagnetism and Materials

    CERN Document Server

    Moliton, André

    2007-01-01

    Basic Electromagnetism and Materials is the product of many years of teaching basic and applied electromagnetism. This textbook can be used to teach electromagnetism to a wide range of undergraduate science majors in physics, electrical engineering or materials science. However, by making lesser demands on mathematical knowledge than competing texts, and by emphasizing electromagnetic properties of materials and their applications, this textbook is uniquely suited to students of materials science. Many competing texts focus on the study of propagation waves either in the microwave or optical domain, whereas Basic Electromagnetism and Materials covers the entire electromagnetic domain and the physical response of materials to these waves. Professor André Moliton is Director of the Unité de Microélectronique, Optoélectronique et Polymères (Université de Limoges, France), which brings together three groups studying the optoelectronics of molecular and polymer layers, micro-optoelectronic systems for teleco...

  17. Characterization of Nanophase Materials

    Science.gov (United States)

    Wang, Zhong Lin

    2000-01-01

    Engineering of nanophase materials and devices is of vital interest in electronics, semiconductors and optics, catalysis, ceramics and magnetism. Research associated with nanoparticles has widely spread and diffused into every field of scientific research, forming a trend of nanocrystal engineered materials. The unique properties of nanophase materials are entirely determined by their atomic scale structures, particularly the structures of interfaces and surfaces. Development of nanotechnology involves several steps, of which characterization of nanoparticles is indespensable to understand the behavior and properties of nanoparticles, aiming at implementing nanotechnolgy, controlling their behavior and designing new nanomaterials systems with super performance. The book will focus on structural and property characterization of nanocrystals and their assemblies, with an emphasis on basic physical approach, detailed techniques, data interpretation and applications. Intended readers of this comprehensive reference work are advanced graduate students and researchers in the field, who are specialized in materials chemistry, materials physics and materials science.

  18. Estimativa da produção anual de serapilheira dos bosques de mangue no Furo Grande, Bragança-Pará Estimates of the annual litter production in mangrove stands in Furo Grande, Bragança-Pará

    Directory of Open Access Journals (Sweden)

    Marcus Emanuel Barroncas Fernandes

    2007-10-01

    Full Text Available As condições ambientais de determinado local podem influenciar a produtividade dos manguezais. Assim, este estudo estimou a produção total e dos componentes da serapilheira no Furo Grande, Bragança, PA. Este estudo compreendeu quatro ciclos anuais (julho/2000 a agosto/2004 em três sítios. Foram instaladas sete cestas em cada sítio ao longo de uma transecção de 140 m, com intervalos de 20 m. Cada cesta possuía uma área útil de 1 m², com tela de 1 mm², suspensa acima do nível das marés de sizígia. O material acumulado nas cestas foi coletado mensalmente, separado em folha, flor, fruto, estípula, galho e miscelânea, sendo posteriormente secado a 70 ºC até alcançar peso constante. A produção média dos quatro anos foi de 9,85 t.ha-1.ano-1 no sítio 1, 6,41 t.ha-1.ano-1 no sítio 2 e 5,99 t.ha-1.ano-1 no sítio 3, cuja comparação apresenta diferença significativa entre os sítios 1 e 3 (H=7,53; gl=2; pIt is well known that environmental conditions of a determined place can influence the productivity of mangroves. So, the present study estimated the total and components litter production in Furo Grande, Bragança-PA. This study comprised four annual cycles (July/2000 to August/2004 at three sites. Seven traps were placed at each site along a 140 m transect, with 20 m intervals. Each trap had a useful area of 1 m², with 1 mm² mesh, suspended above the spring tide level. Accumulated material in the traps was collected on a monthly basis, sorted manually into leaves, flowers, fruits, stipules, twigs, and miscellaneous and then oven-dried to constant weight at 70ºC. The mean production of four years was 9.85 t.ha-1.year-1 at site 1, 6.41 t.ha-1. year-1 at site 2, and 5.99 t.ha-1. year-1 at site 3, with significant difference between sites 1 and 3 (H=7.53; df=2; p<0.05. Overall, the results showed that leaf was the most productive component, and together with flower, had peak in the dry season, which seems to favor energy

  19. Frontiers in Superconducting Materials

    CERN Document Server

    Narlikar, Anant V

    2005-01-01

    Frontiers in Superconducting Materials gives a state-of-the-art report of the most important topics of the current research in superconductive materials and related phenomena. It comprises 30 chapters written by renowned international experts in the field. It is of central interest to researchers and specialists in Physics and Materials Science, both in academic and industrial research, as well as advanced students. It also addresses electronic and electrical engineers. Even non-specialists interested in superconductivity might find some useful answers.

  20. Joining of advanced materials

    CERN Document Server

    Messler, Robert W

    1993-01-01

    Provides an unusually complete and readable compilation of the primary and secondary options for joining conventional materials in non-conventional ways. Provides unique coverage of adhesive bonding using both organic and inorganic adhesives, cements and mortars. Focuses on materials issues without ignoring issues related to joint design, production processing, quality assurance, process economics, and joining performance in service.Joining of advanced materials is a unique treatment of joining of both conventional and advanced metals andalloys, intermetallics, ceramics, glasses, polymers, a

  1. Leaching materials from cavities

    International Nuclear Information System (INIS)

    Hodgson, T.D.; Jordan, T.W.J.

    1980-01-01

    A material is leached from a cavity by contacting the material with a liquid and subjecting the liquid to a number of pressure cycles, each pressure cycle involving a decrease in pressure to cause boiling of the liquid, followed by a rise in pressure to inhibit the boiling. The method may include the step of heating the liquid to a temperature near to its boiling point. The material may be nuclear fuel pellets or calcium carbonate pellets. (author)

  2. Micromechanics of heterogeneous materials

    CERN Document Server

    Buryachenko, Valeriy

    2007-01-01

    Here is an accurate and timely account of micromechanics, which spans materials science, mechanical engineering, applied mathematics, technical physics, geophysics, and biology. The book features rigorous and unified theoretical methods of applied mathematics and statistical physics in the material science of microheterogeneous media. Uniquely, it offers a useful demonstration of the systematic and fundamental research of the microstructure of the wide class of heterogeneous materials of natural and synthetic nature.

  3. Alloy catalyst material

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention relates to a novel alloy catalyst material for use in the synthesis of hydrogen peroxide from oxygen and hydrogen, or from oxygen and water. The present invention also relates to a cathode and an electrochemical cell comprising the novel catalyst material, and the process use...... of the novel catalyst material for synthesising hydrogen peroxide from oxygen and hydrogen, or from oxygen and water....

  4. Functionally graded materials

    CERN Document Server

    Mahamood, Rasheedat Modupe

    2017-01-01

    This book presents the concept of functionally graded materials as well as their use and different fabrication processes. The authors describe the use of additive manufacturing technology for the production of very complex parts directly from the three dimension computer aided design of the part by adding material layer after layer. A case study is also presented in the book on the experimental analysis of functionally graded material using laser metal deposition process.

  5. Absolute nuclear material assay

    Science.gov (United States)

    Prasad, Manoj K [Pleasanton, CA; Snyderman, Neal J [Berkeley, CA; Rowland, Mark S [Alamo, CA

    2010-07-13

    A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

  6. Superconducting composites materials

    International Nuclear Information System (INIS)

    Kerjouan, P.; Boterel, F.; Lostec, J.; Bertot, J.P.; Haussonne, J.M.

    1991-01-01

    The new superconductor materials with a high critical current own a large importance as well in the electronic components or in the electrotechnical devices fields. The deposit of such materials with the thick films technology is to be more and more developed in the years to come. Therefore, we tried to realize such thick films screen printed on alumina, and composed mainly of the YBa 2 Cu 3 O 7-δ material. We first realized a composite material glass/YBa 2 Cu 3 O 7-δ , by analogy with the classical screen-printed inks where the glass ensures the bonding with the substrate. We thus realized different materials by using some different classes of glass. These materials owned a superconducting transition close to the one of the pure YBa 2 Cu 3 O 7-δ material. We made a slurry with the most significant composite materials and binders, and screen-printed them on an alumina substrate preliminary or not coated with a diffusion barrier layer. After firing, we studied the thick films adhesion, the alumina/glass/composite material interfaces, and their superconducting properties. 8 refs.; 14 figs.; 9 tabs [fr

  7. Materials Science Laboratory

    Science.gov (United States)

    Jackson, Dionne

    2005-01-01

    The NASA Materials Science Laboratory (MSL) provides science and engineering services to NASA and Contractor customers at KSC, including those working for the Space Shuttle. International Space Station. and Launch Services Programs. These services include: (1) Independent/unbiased failure analysis (2) Support to Accident/Mishap Investigation Boards (3) Materials testing and evaluation (4) Materials and Processes (M&P) engineering consultation (5) Metrology (6) Chemical analysis (including ID of unknown materials) (7) Mechanical design and fabrication We provide unique solutions to unusual and urgent problems associated with aerospace flight hardware, ground support equipment and related facilities.

  8. Materials characterization techniques

    National Research Council Canada - National Science Library

    Zhang, Sam; Li, L; Kumar, Ashok

    2009-01-01

    "With an emphasis on practical applications and real-world case studies, Materials Characterization Techniques presents the principles of widely used advanced surface and structural characterization...

  9. Materials Characterization Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Materials Characterization Facility enables detailed measurements of the properties of ceramics, polymers, glasses, and composites. It features instrumentation...

  10. Smuggling special nuclear materials

    International Nuclear Information System (INIS)

    Lazaroiu, Gheorghe

    1999-01-01

    Ever since the collapse of the former Soviet Union reports have circulated with increasing frequency concerning attempts to smuggle materials from that country's civil and military nuclear programs. Such an increase obviously raises a number of concerns (outlined in the author's introduction), chief among which is the possibility that these materials might eventually fall into the hands of proliferant states or terrorist groups. The following issues are presented: significance of materials being smuggled; sources and smuggling routes; potential customers; international efforts to reduce nuclear smuggling; long-term disposition of fissile materials. (author)

  11. Materials development for TESOL

    CERN Document Server

    Mishan, Freda

    2015-01-01

    Materials development has become much more important in the field of TESOL in the last twenty years: modules on materials development are now commonplace on MA TESOL courses around the world. The overall aim of the book is to introduce readers to a wide range of theoretical and practical issues in materials development to enable them to make informed and principled choices in the selection, evaluation, adaptation and production of materials. The book aims to show how these choices need to be informed by an awareness of culture, context and purpose.

  12. Materials information data bank

    International Nuclear Information System (INIS)

    Mead, K.E.

    1978-03-01

    A major concern in the design of weapons systems is compatibility of materials with each other and with the enclosed environment. Usually these systems require long-term storage and must have high reliability at the end of this storage period. Materials selection is thus based on past experience and on laboratory-accelerated testing to assure this long-term reliability. To assist in materials selection, a computerized materials data bank has been established. In addition to references on personnel and documents, this data bank provides annotated information on materials so that the designer and materials engineer can draw on it for guidance in selecting materials. The primary purpose of the data bank is to provide materials compatibility data. However, the structure of the system permits the data bank to be used for storage and retrieval of general materials information. The data bank storage and information retrieval philosophy is discussed and procedures for information gathering are outlined. Examples of data entries and a list of search routines are presented to demonstrate the usefulness and versatility of the system

  13. Reactor Materials Research

    Energy Technology Data Exchange (ETDEWEB)

    Van Walle, E

    2002-04-01

    The activities of SCK-CEN's Reactor Materials Research Department for 2001 are summarised. The objectives of the department are: (1) to evaluate the integrity and behaviour of structural materials used in nuclear power industry; (2) to conduct research to unravel and understand the parameters that determine the material behaviour under or after irradiation; (3) to contribute to the interpretation, the modelling of the material behaviour and to develop and assess strategies for optimum life management of nuclear power plant components. The programmes within the department are focussed on studies concerning (1) Irradiation Assisted Stress Corrosion Cracking (IASCC); (2) nuclear fuel; and (3) Reactor Pressure Vessel Steel.

  14. Reactor Materials Research

    International Nuclear Information System (INIS)

    Van Walle, E.

    2002-01-01

    The activities of SCK-CEN's Reactor Materials Research Department for 2001 are summarised. The objectives of the department are: (1) to evaluate the integrity and behaviour of structural materials used in nuclear power industry; (2) to conduct research to unravel and understand the parameters that determine the material behaviour under or after irradiation; (3) to contribute to the interpretation, the modelling of the material behaviour and to develop and assess strategies for optimum life management of nuclear power plant components. The programmes within the department are focussed on studies concerning (1) Irradiation Assisted Stress Corrosion Cracking (IASCC); (2) nuclear fuel; and (3) Reactor Pressure Vessel Steel

  15. Soft-Material Robotics

    OpenAIRE

    Wang, L; Nurzaman, SG; Iida, Fumiya

    2017-01-01

    There has been a boost of research activities in robotics using soft materials in the past ten years. It is expected that the use and control of soft materials can help realize robotic systems that are safer, cheaper, and more adaptable than the level that the conventional rigid-material robots can achieve. Contrary to a number of existing review and position papers on soft-material robotics, which mostly present case studies and/or discuss trends and challenges, the review focuses on the fun...

  16. Material for radioactive protection

    Science.gov (United States)

    Taylor, R.S.; Boyer, N.W.

    A boron containing burn resistant, low-level radiation protection material useful, for example, as a liner for radioactive waste disposal and storage, a component for neutron absorber, and a shield for a neutron source is described. The material is basically composed of borax in the range of 25 to 50%, coal tar in the range of 25 to 37.5%, with the remainder being an epoxy resin mix. A preferred composition is 50% borax, 25% coal tar and 25% epoxy resin. The material is not susceptible to burning and is about 1/5 the cost of existing radiation protection material utilized in similar applications.

  17. Materials Behavior Research Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The purpose is to evaluate mechanical properties of materials including metals, intermetallics, metal-matrix composites, and ceramic-matrix composites under typical...

  18. Fusion Reactor Materials

    International Nuclear Information System (INIS)

    Decreton, M.

    2001-01-01

    The objective of SCK-CEN's programme on fusion reactor materials is to contribute to the knowledge on the behaviour of fusion reactor materials and components during and after irradiation. Ongoing projects include: the study of the mechanical behaviour of structural materials under neutron irradiation; the investigation of the characteristics of irradiated first wall material such as beryllium; the detection of abrupt electrical degradation of insulating ceramics under high temperature and neutron irradiation; and the study of dismantling and waste disposal strategy for fusion reactors. Progress and achievements in these areas in 2000 are discussed

  19. Thermoelectric materials having porosity

    Science.gov (United States)

    Heremans, Joseph P.; Jaworski, Christopher M.; Jovovic, Vladimir; Harris, Fred

    2014-08-05

    A thermoelectric material and a method of making a thermoelectric material are provided. In certain embodiments, the thermoelectric material comprises at least 10 volume percent porosity. In some embodiments, the thermoelectric material has a zT greater than about 1.2 at a temperature of about 375 K. In some embodiments, the thermoelectric material comprises a topological thermoelectric material. In some embodiments, the thermoelectric material comprises a general composition of (Bi.sub.1-xSb.sub.x).sub.u(Te.sub.1-ySe.sub.y).sub.w, wherein 0.ltoreq.x.ltoreq.1, 0.ltoreq.y.ltoreq.1, 1.8.ltoreq.u.ltoreq.2.2, 2.8.ltoreq.w.ltoreq.3.2. In further embodiments, the thermoelectric material includes a compound having at least one group IV element and at least one group VI element. In certain embodiments, the method includes providing a powder comprising a thermoelectric composition, pressing the powder, and sintering the powder to form the thermoelectric material.

  20. Materials for Slack Diaphragms

    Science.gov (United States)

    Puschmann, Traute

    1940-01-01

    This report deals with systematic experiments carried out on five diaphragm materials with different pretreatment, for the purpose of ascertaining the suitability of such materials for slack diaphragms. The relationship of deflection and load, temperature and moisture, was recorded. Of the explored materials, synthetic leather, balloon cloth, goldbeaters skin, Igelit and Buna, synthetic leather treated with castor oil is the most suitable material for the small pressure range required. Balloon cloth is nearly as good, while goldbeaters skin, Igelit and Buna were found to be below the required standards.

  1. Frontiers in Magnetic Materials

    CERN Document Server

    Narlikar, Anant V

    2005-01-01

    Frontiers in Magnetic Materials focuses on the current achievements and state-of-the-art advancements in magnetic materials. Several lines of development- High-Tc Superconductivity, Nanotechnology and refined experimental techniques among them – raised knowledge and interest in magnetic materials remarkably. The book comprises 24 chapters on the most relevant topics written by renowned international experts in the field. It is of central interest to researchers and specialists in Physics and Materials Science, both in academic and industrial research, as well as advanced students.

  2. The materialization of fear

    DEFF Research Database (Denmark)

    Jensen, Martin Trandberg

    to matter in ways not simply reducible to security optimization, risk management and symbolic politics? To reach this aim, I draw on material studies, mobilities design and non-representational theories to provide a rich socio-material tale of how granite stones, bollards and other counter......-terrorist materials contribute to the construction and ‘feel’ of contemporary urban tourism. How do such prominent material designs influence, both affectively, practically and emotionally, tourists? How are they re-appropriated and imbued with (inter)subjective meanings, and how may a richer understanding of how...

  3. Advanced thermal management materials

    CERN Document Server

    Jiang, Guosheng; Kuang, Ken

    2012-01-01

    ""Advanced Thermal Management Materials"" provides a comprehensive and hands-on treatise on the importance of thermal packaging in high performance systems. These systems, ranging from active electronically-scanned radar arrays to web servers, require components that can dissipate heat efficiently. This requires materials capable of dissipating heat and maintaining compatibility with the packaging and dye. Its coverage includes all aspects of thermal management materials, both traditional and non-traditional, with an emphasis on metal based materials. An in-depth discussion of properties and m

  4. Development of magnetic materials

    International Nuclear Information System (INIS)

    Bar'yakhtar, V.

    2000-01-01

    In the paper are presented both experimental and theoretical basic results of physics of magnetic materials. The special attention is given to a problem of creation of magnetic materials for recording and reproduction of the information. The influence of fundamental scientific results on process of creation of materials with the given properties and constriction of devices and facilities of new generation, and return influence of financing of scientific researches on process of discovering of new unknown fundamental properties of magnetic materials is considered. (author)

  5. [Materials for construction sector].

    Science.gov (United States)

    Macchia, C

    2012-01-01

    The construction sector is characterized by high complexity due to several factors. There are a lot of processes within the building sites and they need the use of different materials with the help of appropriate technologies. Traditional materials have evolved and diversified, meanwhile new products and materials appeared and still appear, offering services which meet user needs, but that often involve risks to the health of workers. Research in the field of materials, promoted and carried out at various levels, has led to interesting results, encoded in the form of rules and laws.

  6. Materials on the brink: unprecedented transforming materials

    Science.gov (United States)

    2013-09-10

    2013 56.00 Shenqiang Ren\\, Manfred Wuttig. Spinodal synthesis of PZT /NFO magnetoelectric, Applied Physics Letters, (08 2007): 83501. doi: 02/06/2013... PZT . This material was discovered through a combinatorial search. Rabe et al. have used first principles methods to show that this morphotropic...temperature. James et al. have suggested a new strategy for energy recovery from waste heat using this alloy. • Discovery of a new fatigue -free shape

  7. Is the materialization of architecture necessarily material?

    Directory of Open Access Journals (Sweden)

    Čarapić Ana

    2008-01-01

    Full Text Available Architectural dematerialization process has started in the first half of the previous century, and has intensively developed at the beginning of this one. Architectural form decomposition on homo­geneous envelope and dependent internal structure, affect on façade materials to liberate from the ballast of supported role, and to gain the privilege to be the main holder of symbolic and sensual dimension. Therefore, on semantic level, they became primary driving force of dematerialization of form, and architecture in the whole. With new technological development, continuity in 'relieving' of matter has been brought to the extreme. Striving for complete liberty of conventional firmness and stability (in functional and phenomenal mode architecture take over the efemer 'week' substances from nature: water, air light, sound, and turn them in it's proper frame. Therefore, the general thesis of this paper is the absurd of architectural materialization with it's on demateriality. Being brought to the turning point, this absurd transforms both architecture (as artificial matter as well as nature itself. The goal of this paper is to predicate principles of material, formal and architectural genesis, in relation to the theoretical sources, as well as by examples of two developed constructions (pavilion 'Blur building' by Diller & Skofidio, and 'Tower of sound' by Toyo Ito.

  8. Between material and ideas

    DEFF Research Database (Denmark)

    Dahlstedt, Palle

    2012-01-01

    between a dynamic concept and the changing material form of the work. Combining ideas, tools, material and memory, creativity is described as a coherent, dynamic, and iterative process that navigates the space of the chosen medium, guided by the tools at hand, and by the continuously revised ideas...

  9. Designing with residual materials

    NARCIS (Netherlands)

    Walhout, W.; Wever, R.; Blom, E.; Addink-Dölle, L.; Tempelman, E.

    2013-01-01

    Many entrepreneurial businesses have attempted to create value based on the residual material streams of third parties. Based on ‘waste’ materials they designed products, around which they built their company. Such activities have the potential to yield sustainable products. Many of such companies

  10. Materials modified by irradiation

    International Nuclear Information System (INIS)

    Chmielewski, A.G.

    2007-01-01

    Application of radiation in pharmaceutical sciences and cosmetology, polymer materials, food industry, environment, health camre products and packing production is described. Nano-technology is described more detailed, because it is less known as irradiation using technology. Economic influence of the irradiation on the materials value addition is shown

  11. Transport of Radioactive Materials

    International Nuclear Information System (INIS)

    2001-01-01

    This address overviews the following aspects: concepts on transport of radioactive materials, quantities used to limit the transport, packages, types of packages, labeling, index transport calculation, tags, labeling, vehicle's requirements and documents required to authorize transportation. These requirements are considered in the regulation of transport of radioactive material that is in drafting step

  12. Social character of materialism.

    Science.gov (United States)

    Chatterjee, A; Hunt, J M; Kernan, J B

    2000-06-01

    Scores for 170 undergraduates on Richins and Dawson's Materialism scale were correlated with scores on Kassarjian's Social Preference Scale, designed to measure individuals' character structure. A correlation of .26 between materialism and other-directed social character suggested that an externally oriented reference system guides materialists' perceptions, judgments, acquisitions, and possessions.

  13. Materials testing 1985

    International Nuclear Information System (INIS)

    1985-01-01

    The following subjects were dealt with at the meeting: Testing with vibration loads; Hardness testing; Calibration of test devices and equipment; Test technique for compound materials; Vibration strength testing and expense of experiments; Solving problems in introducing forces into samples and components and process of ambulant materials testing. There are 17 separate abstracts from among 43 lectures. (orig./PW) [de

  14. Light as experiential material

    DEFF Research Database (Denmark)

    Petersen, Kjell Yngve; Søndergaard, Karin

    2013-01-01

    'Light as experiential material' is concerned with the development of a psychophysical method of investigation, by which the experience and design of architectural lighting can be approached in research and education......'Light as experiential material' is concerned with the development of a psychophysical method of investigation, by which the experience and design of architectural lighting can be approached in research and education...

  15. Light as experiential material

    DEFF Research Database (Denmark)

    Søndergaard, Karin; Petersen, Kjell Yngve

    2013-01-01

    'Light as experiential material' is concerned with the development of a psychophysical method of investigation, by which we can approach the experience and design of architectural lighting in research and education.......'Light as experiential material' is concerned with the development of a psychophysical method of investigation, by which we can approach the experience and design of architectural lighting in research and education....

  16. Contemporary dielectric materials

    CERN Document Server

    Saravanan, R

    2016-01-01

    This book deals with experimental results of the physical characterization of several important, dielectric materials of great current interest. The experimental tools used for the analysis of these materials include X-ray diffraction, dielectric measurements, magnetic measurements using a vibrating sample magnetometer, optical measurements using a UV-Visible spectrometer etc.

  17. Designing through Material

    DEFF Research Database (Denmark)

    Kruse Aagaard, Anders

    2014-01-01

    as an opportunity to connect the digital environment with the reality of materials – and use realisation and materialisation to generate architectural developments and findings through an iterative mode of thinking about the dialogue between drawing, materials and fabrication. Consequently the interest and mind...

  18. Gravitation in Material Media

    Science.gov (United States)

    Ridgely, Charles T.

    2011-01-01

    When two gravitating bodies reside in a material medium, Newton's law of universal gravitation must be modified to account for the presence of the medium. A modified expression of Newton's law is known in the literature, but lacks a clear connection with existing gravitational theory. Newton's law in the presence of a homogeneous material medium…

  19. Structural and Material Instability

    DEFF Research Database (Denmark)

    Cifuentes, Gustavo Cifuentes

    This work is a small contribution to the general problem of structural and material instability. In this work, the main subject is the analysis of cracking and failure of structural elements made from quasi-brittle materials like concrete. The analysis is made using the finite element method. Three...

  20. Mechanical meta-materials

    NARCIS (Netherlands)

    Zadpoor, A.A.

    2016-01-01

    The emerging concept of mechanical meta-materials has received increasing attention during the last few years partially due to the advances in additive manufacturing techniques that have enabled fabricating materials with arbitrarily complex micro/nano-architectures. The rationally designed

  1. Impacted material placement plans

    International Nuclear Information System (INIS)

    Hickey, M.J.

    1997-01-01

    Impacted material placement plans (IMPP) are documents identifying the essential elements in placing remediation wastes into disposal facilities. Remediation wastes or impacted material(s) are those components used in the construction of the disposal facility exclusive of the liners and caps. The components might include soils, concrete, rubble, debris, and other regulatory approved materials. The IMPP provides the details necessary for interested parties to understand the management and construction practices at the disposal facility. The IMPP should identify the regulatory requirements from applicable DOE Orders, the ROD(s) (where a part of a CERCLA remedy), closure plans, or any other relevant agreements or regulations. Also, how the impacted material will be tracked should be described. Finally, detailed descriptions of what will be placed and how it will be placed should be included. The placement of impacted material into approved on-site disposal facilities (OSDF) is an integral part of gaining regulatory approval. To obtain this approval, a detailed plan (Impacted Material Placement Plan [IMPP]) was developed for the Fernald OSDF. The IMPP provides detailed information for the DOE, site generators, the stakeholders, regulatory community, and the construction subcontractor placing various types of impacted material within the disposal facility

  2. Radioactivity in building materials

    International Nuclear Information System (INIS)

    1985-01-01

    The present report, drawn up at the request of the former Minister of Public Health and Environmental Affairs of the Netherlands, discusses the potential radiological consequences for the population of the Netherlands of using waste materials as building materials in housing construction. (Auth.)

  3. Environmental materials and interfaces

    International Nuclear Information System (INIS)

    1991-11-01

    A workshop that explored materials and interfaces research needs relevant to national environmental concerns was conducted at Pacific Northwest Laboratory. The purposes of the workshop were to refine the scientific research directions being planned for the Materials and Interface Program in the Molecular Science Research Center (MSRC) and further define the research and user equipment to the included as part of the proposed Environmental and Molecular Science Laboratory (EMSL). Three plenary information sessions served to outline the background, objectives, and status of the MSRC and EMSL initiatives; selected specific areas with environmentally related materials; and the status of capabilities and facilities planned for the EMSL. Attention was directed to four areas where materials and interface science can have a significant impact on prevention and remediation of environmental problems: in situ detection and characterization of hazardous wastes (sensors), minimization of hazardous waste (separation membranes, ion exchange materials, catalysts), waste containment (encapsulation and barrier materials), and fundamental understanding of contaminant transport mechanisms. During all other sessions, the participants were divided into three working groups for detailed discussion and the preparation of a written report. The working groups focused on the areas of interface structure and chemistry, materials and interface stability, and materials synthesis. These recommendations and suggestions for needed research will be useful for other researchers in proposing projects and for suggesting collaborative work with MSRC researchers. 1 fig

  4. Fusion reactor materials

    International Nuclear Information System (INIS)

    Sethi, V.K.; Scholz, R.; Nolfi, F.V. Jr.; Turner, A.P.L.

    1980-01-01

    Data are given for each of the following areas: (1) effects of irradiation on fusion reactor materials, (2) hydrogen permeation and materials behavior in alloys, (3) carbon coatings for fusion applications, (4) surface damage of TiB 2 coatings under energetic D + and 4 He + irradiations, and (5) neutron dosimetry

  5. Sex Education Materials.

    Science.gov (United States)

    Singer-Magdoff, Laura

    1969-01-01

    After briefly discussing the philosophy of sex education and appraising generally the nature of the instructional methods and materials currently in use in the schools, the author provides brief but incisive reviews of a number of films, filmstrips, and other instructional materials dealing with sex. The reviews are continued in the succeeding…

  6. Scintillator material. Szintillatormaterial

    Energy Technology Data Exchange (ETDEWEB)

    Siegmund, M; Bendig, J; Regenstein, W

    1987-11-25

    A scintillator material for detection and quantitative determination of ionizing radiation is discussed consisting of an acridone dissolved in a fluid or solid medium. Solvent mixtures with at least one protogenic component or polymers and copolymers are used. The scintillator material is distinguished by an excellent stability at high energy doses.

  7. Detecting Illicit Nuclear Materials

    International Nuclear Information System (INIS)

    Kouzes, Richard T.

    2005-01-01

    The threat that weapons of mass destruction might enter the United States has led to a number of efforts for the detection and interdiction of nuclear, radiological, chemical, and biological weapons at our borders. There have been multiple deployments of instrumentation to detect radiation signatures to interdict radiological material, including weapons and weapons material worldwide

  8. The Materiality of Research

    DEFF Research Database (Denmark)

    Meier, Ninna

    2016-01-01

    In this feature essay, Ninna Meier reflects on the materiality of the writing – and re-writing – process in academic research. She explores the ways in which our ever-accummulating thoughts come to form layers on the material objects in which we write our notes and discusses the pleasures of co-authorship....

  9. Chemical Absorption Materials

    DEFF Research Database (Denmark)

    Thomsen, Kaj

    2011-01-01

    Chemical absorption materials that potentially can be used for post combustion carbon dioxide capture are discussed. They fall into five groups, alkanolamines, alkali carbonates, ammonia, amino acid salts, and ionic liquids. The chemistry of the materials is discussed and advantages and drawbacks...

  10. Material Tracking Using LANMAS

    International Nuclear Information System (INIS)

    Armstrong, F.

    2010-01-01

    LANMAS is a transaction-based nuclear material accountability software product developed to replace outdated and legacy accountability systems throughout the DOE. The core underlying purpose of LANMAS is to track nuclear materials inventory and report transactions (movement, mixing, splitting, decay, etc.) to the Nuclear Materials Management and Safeguards System (NMMSS). While LANMAS performs those functions well, there are many additional functions provided by the software product. As a material is received onto a site or created at a site, its entire lifecycle can be tracked in LANMAS complete to its termination of safeguards. There are separate functions to track material movements between and within material balance areas (MBAs). The level of detail for movements within a MBA is configurable by each site and can be as high as a site designation or as detailed as building/room/rack/row/position. Functionality exists to track the processing of materials, either as individual items or by modeling a bulk process as an individual item to track inputs and outputs from the process. In cases where sites have specialized needs, the system is designed to be flexible so that site specific functionality can be integrated into the product. This paper will demonstrate how the software can be used to input material into an account and track it to its termination of safeguards.

  11. The Computational Materials Repository

    DEFF Research Database (Denmark)

    Landis, David D.; Hummelshøj, Jens S.; Nestorov, Svetlozar

    2012-01-01

    The possibilities for designing new materials based on quantum physics calculations are rapidly growing, but these design efforts lead to a significant increase in the amount of computational data created. The Computational Materials Repository (CMR) addresses this data challenge and provides...

  12. The nuclear materials contraband

    International Nuclear Information System (INIS)

    Williams, P.; Woessner, P.

    1996-01-01

    Several seizures of nuclear materials carried by contraband have been achieved. Some countries or criminal organizations could manufacture atomic bombs and use them. This alarming situation is described into details. Only 40% of drugs are seized by the American police and probably less in western Europe. The nuclear materials market is smaller than the drugs'one but the customs has also less experience to intercept the uranium dispatch for instance more especially as the peddlers are well organized. A severe control of the international transports would certainly allow to seize a large part of nuclear contraband materials but some dangerous isotopes as uranium 235 or plutonium 239 are little radioactive and which prevents their detection by the Geiger-Mueller counters. In France, some regulations allow to control the materials used to manufacture the nuclear weapons, and diminish thus the risk of a nuclear materials contraband. (O.L.). 4 refs., 2 figs

  13. Negative thermal expansion materials

    International Nuclear Information System (INIS)

    Evans, J.S.O.

    1997-01-01

    The recent discovery of negative thermal expansion over an unprecedented temperature range in ZrW 2 O 8 (which contracts continuously on warming from below 2 K to above 1000 K) has stimulated considerable interest in this unusual phenomenon. Negative and low thermal expansion materials have a number of important potential uses in ceramic, optical and electronic applications. We have now found negative thermal expansion in a large new family of materials with the general formula A 2 (MO 4 ) 3 . Chemical substitution dramatically influences the thermal expansion properties of these materials allowing the production of ceramics with negative, positive or zero coefficients of thermal expansion, with the potential to control other important materials properties such as refractive index and dielectric constant. The mechanism of negative thermal expansion and the phase transitions exhibited by this important new class of low-expansion materials will be discussed. (orig.)

  14. Recycling fusion materials

    International Nuclear Information System (INIS)

    Ooms, L.

    2005-01-01

    The inherent safety and environmental advantages of fusion power in comparison with other energy sources play an important role in the public acceptance. No waste burden for future generations is therefore one of the main arguments to decide for fusion power. The waste issue has thus been studied in several documents and the final conclusion of which it is stated that there is no permanent disposal waste needed if recycling is applied. But recycling of fusion reactor materials is far to be obvious regarding mostly the very high specific activity of the materials to be handled, the types of materials and the presence of tritium. The main objective of research performed by SCK-CEN is to study the possible ways of recycling fusion materials and analyse the challenges of the materials management from fusion reactors, based on current practices used in fission reactors and the requirements for the manufacture of fusion equipment

  15. Fusion Reactor Materials

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2002-04-01

    The objective of SCK-CEN's programme on fusion reactor materials is to contribute to the knowledge on the radiation-induced behaviour of fusion reactor materials and components as well as to help the international community in building the scientific and technical basis needed for the construction of the future reactor. Ongoing projects include: the study of the mechanical and chemical (corrosion) behaviour of structural materials under neutron irradiation and water coolant environment; the investigation of the characteristics of irradiated first wall material such as beryllium; investigations on the management of materials resulting from the dismantling of fusion reactors including waste disposal. Progress and achievements in these areas in 2001 are discussed.

  16. Materials and nanotechnology

    International Nuclear Information System (INIS)

    2014-01-01

    The focus of the Materials and Nanotechnology Program is technology development related to processing, analysis, testing and characterization of materials in general. These are achieved through execution of R&D projects in engineering and materials science, cooperative projects with private and public sector companies, universities and other research institutes. Besides technology development, this Program also fosters training and human resource development in association with the University of São Paulo and many industrial sectors. This Program is divided into sub-programs in broad areas such as ceramic, composite and metallic materials as well as characterization of physical and chemical properties of materials. The sub-programs are further divided into general topics and within each topic, R&D projects. A brief description of progress in each topic during the last three years follows. (author)

  17. Materials for advanced packaging

    CERN Document Server

    Wong, CP

    2017-01-01

    This second edition continues to be the most comprehensive review on the developments in advanced electronic packaging technologies, with a focus on materials and processing. Recognized experts in the field contribute to 22 updated and new chapters that provide comprehensive coverage on various 3D package architectures, novel bonding and joining techniques, wire bonding, wafer thinning techniques, organic substrates, and novel approaches to make electrical interconnects between integrated circuit and substrates. Various chapters also address advances in several key packaging materials, including: Lead-free solders Flip chip underfills Epoxy molding compounds Conductive adhesives Die attach adhesives/films Thermal interface materials (TIMS) Materials for fabricating embedded passives including capacitors, inductors, and resistors Materials and processing aspects on wafer-level chip scale package (CSP) and MicroElectroMechanical system (MEMS) Contributors also review new and emerging technologies such as Light ...

  18. Lasers in materials science

    CERN Document Server

    Ossi, Paolo; Zhigilei, Leonid

    2014-01-01

    This book covers various aspects of lasers in materials science, including a comprehensive overview on basic principles of laser-materials interactions and applications enabled by pulsed laser systems.  The material is organized in a coherent way, providing the reader with a harmonic architecture. While systematically covering the major current and emerging areas of lasers processing applications, the Volume provides examples of targeted modification of material properties achieved through careful control of the processing conditions and laser irradiation parameters. Special emphasis is placed on specific strategies aimed at nanoscale control of material structure and properties to match the stringent requirements of modern applications.  Laser fabrication of novel nanomaterials, which expands to the domains of photonics, photovoltaics, sensing, and biomedical applications, is also discussed in the Volume. This book assembles chapters based on lectures delivered at the Venice International School on Lasers...

  19. Of 'other' materialities

    DEFF Research Database (Denmark)

    Jensen, Ole B.

    2016-01-01

    within the ‘new materiality’ literature in philosophy as well as in cultural theory. Important lessons are drawn in from across different positions such as non-representational theory, the nonhuman turn, Object-Oriented-Ontology to mention a few. It is argued that to create the necessary materially......In this article, the notion of materialities is rearticulated as an important field for the future of mobilities research. We focus on the intersection between situational mobilities research and design/architecture. The vocabulary and material imaginary developed within the latter are an important...... sensitive imaginary, mobilities research should be looking to architecture and design, as well as it may profit from engaging with these new materially sensitive thinkers. The article ends with some concrete themes for future research inspired by these intersections and identifies ‘material pragmatism...

  20. Reactor pressure boundary materials

    International Nuclear Information System (INIS)

    Hong, Jun Hwa; Chi, S. H.; Lee, B. S.

    2002-04-01

    With a long-term operation of nuclear power plants, the component materials are degraded under severe reactor conditions such as neutron irradiation, high temperature, high pressure and corrosive environment. It is necessary to establish the reliable and practical technologies for improving and developing the component materials and for evaluating the mechanical properties. Especially, it is very important to investigate the technologies for reactor pressure boundary materials such as reactor vessel and pipings in accordance with their critical roles. Therefore, this study was focused on developing and advancing the microstructural/micro-mechanical evaluation technologies, and on evaluating the neutron irradiation characteristics and radiation effects analysis technology of the reactor pressure boundary materials, and also on establishing a basis of nuclear material property database

  1. Articulating Material Criteria

    DEFF Research Database (Denmark)

    Hasling, Karen Marie

    2013-01-01

    This paper discusses the experiences and potentials with materials teaching at the Institute for Product Design at Kolding School of Design, using materials teaching as experiments in my PhD project. The project intents to create a stronger material awareness among product design students...... with emphasis on sustainability. The experiments aim to develop an understanding of, how product design students include materials in their design practice and how tools can be developed that further enhance this. Hence experiments are essential for the progress of the PhD project as they help to observe....... Furthermore the purpose is to initiate a discussion on, how to create educational tools for material awareness creation in the design education e.g. by applying objective and quantitative methods in an otherwise often subjective design process....

  2. Security of material

    International Nuclear Information System (INIS)

    Nilsson, A.

    2001-01-01

    Full text: From the early days of discovery and experimentation with nuclear science, nuclear and radioactive materials have held extraordinary potential for being of great benefit to humankind, as well as for causing significant harm. For the past forty years, the IAEA has played an important role in ensuring that nuclear technologies and materials are used only for peaceful purposes. The Agency's safeguards programme has been providing assurances that States honour their undertakings to use nuclear facilities and materials for peaceful purposes only. The potential of nuclear materials and other radioactive materials being used in subversive activities, such as theft, illicit trafficking, sabotage and threats thereof, has been recognized by the international community. The tragic events in New York have given new light to and increased concern for this potential. No target may be considered immune from terrorism. Since 1993, States have confirmed over 370 cases of illicit trafficking. Information is also available on potential attempts of and actual acts of sabotage. For any State, the first step in ensuring the security of their materials is an effective national system. Such a system must contain multiple elements, including physical protection measures, material accountability arrangements, reliable detection capabilities, and plans for rapid and effective response when material is found to be lost, stolen or otherwise not under proper control. The system must also cover illegal waste dumping and other activities that would result in the release of radioactive material into the environment. All these measures should be based on well founded legal and regulatory structures. In many cases, the responsibility for these various elements lies with different bodies, and co-operation between them is vital to the success of the national system. The Agency's programme Security of Material aims at being of service to States in their efforts to upgrade their security

  3. Thermodynamics of nuclear materials

    International Nuclear Information System (INIS)

    1979-01-01

    Full text: The science of chemical thermodynamics has substantially contributed to the understanding of the many problems encountered in nuclear and reactor technology. These problems include reaction of materials with their surroundings and chemical and physical changes of fuels. Modern reactor technology, by its very nature, has offered new fields of investigations for the scientists and engineers concerned with the design of nuclear fuel elements. Moreover, thermodynamics has been vital in predicting the behaviour of new materials for fission as well as fusion reactors. In this regard, the Symposium was organized to provide a mechanism for review and discussion of recent thermodynamic investigations of nuclear materials. The Symposium was held in the Juelich Nuclear Research Centre, at the invitation of the Government of the Federal Republic of Germany. The International Atomic Energy Agency has given much attention to the thermodynamics of nuclear materials, as is evidenced by its sponsorship of four international symposia in 1962, 1965, 1967, and 1974. The first three meetings were primarily concerned with the fundamental thermodynamics of nuclear materials; as with the 1974 meeting, this last Symposium was primarily aimed at the thermodynamic behaviour of nuclear materials in actual practice, i.e., applied thermodynamics. Many advances have been made since the 1974 meeting, both in fundamental and applied thermodynamics of nuclear materials, and this meeting provided opportunities for an exchange of new information on this topic. The Symposium dealt in part with the thermodynamic analysis of nuclear materials under conditions of high temperatures and a severe radiation environment. Several sessions were devoted to the thermodynamic studies of nuclear fuels and fission and fusion reactor materials under adverse conditions. These papers and ensuing discussions provided a better understanding of the chemical behaviour of fuels and materials under these

  4. Materials at LANL

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Antoinette J [Los Alamos National Laboratory

    2010-01-01

    Exploring the physics, chemistry, and metallurgy of materials has been a primary focus of Los Alamos National Laboratory since its inception. In the early 1940s, very little was known or understood about plutonium, uranium, or their alloys. In addition, several new ionic, polymeric, and energetic materials with unique properties were needed in the development of nuclear weapons. As the Laboratory has evolved, and as missions in threat reduction, defense, energy, and meeting other emerging national challenges have been added, the role of materials science has expanded with the need for continued improvement in our understanding of the structure and properties of materials and in our ability to synthesize and process materials with unique characteristics. Materials science and engineering continues to be central to this Laboratory's success, and the materials capability truly spans the entire laboratory - touching upon numerous divisions and directorates and estimated to include >1/3 of the lab's technical staff. In 2006, Los Alamos and LANS LLC began to redefine our future, building upon the laboratory's established strengths and promoted by strongly interdependent science, technology and engineering capabilities. Eight Grand Challenges for Science were set forth as a technical framework for bridging across capabilities. Two of these grand challenges, Fundamental Understanding of Materials and Superconductivity and Actinide Science. were clearly materials-centric and were led out of our organizations. The complexity of these scientific thrusts was fleshed out through workshops involving cross-disciplinary teams. These teams refined the grand challenge concepts into actionable descriptions to be used as guidance for decisions like our LDRD strategic investment strategies and as the organizing basis for our external review process. In 2008, the Laboratory published 'Building the Future of Los Alamos. The Premier National Security Science Laboratory

  5. Radioactive waste solidifying material

    International Nuclear Information System (INIS)

    Ono, Keiichi; Sakai, Etsuro.

    1989-01-01

    The solidifying material according to this invention comprises cement material, superfine powder, highly water reducing agent, Al-containing rapid curing material and coagulation controller. As the cement material, various kinds of quickly hardening, super quickly hardening and white portland cement, etc. are usually used. As the superfine powder, those having average grain size smaller by one order than that of the cement material are desirable and silica dusts, etc. by-produced upon preparing silicon, etc. are used. As the highly water reducing agent, surface active agents of high decomposing performance and comprising naphthalene sulfonate, etc. as the main ingredient are used. As the Al-containing rapidly curing material, calcium aluminate, etc. is used in an amount of less than 10 parts by weight based on 100 parts by weight of the powdery body. As the coagulation controller, boric acid etc. usually employed as a retarder is used. This can prevent dissolution or collaption of pellets and reduce the leaching of radioactive material. (T.M.)

  6. NSUF Irradiated Materials Library

    Energy Technology Data Exchange (ETDEWEB)

    Cole, James Irvin [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    The Nuclear Science User Facilities has been in the process of establishing an innovative Irradiated Materials Library concept for maximizing the value of previous and on-going materials and nuclear fuels irradiation test campaigns, including utilization of real-world components retrieved from current and decommissioned reactors. When the ATR national scientific user facility was established in 2007 one of the goals of the program was to establish a library of irradiated samples for users to access and conduct research through competitively reviewed proposal process. As part of the initial effort, staff at the user facility identified legacy materials from previous programs that are still being stored in laboratories and hot-cell facilities at the INL. In addition other materials of interest were identified that are being stored outside the INL that the current owners have volunteered to enter into the library. Finally, over the course of the last several years, the ATR NSUF has irradiated more than 3500 specimens as part of NSUF competitively awarded research projects. The Logistics of managing this large inventory of highly radioactive poses unique challenges. This document will describe materials in the library, outline the policy for accessing these materials and put forth a strategy for making new additions to the library as well as establishing guidelines for minimum pedigree needed to be included in the library to limit the amount of material stored indefinitely without identified value.

  7. Hydrophilic nanoporous materials

    DEFF Research Database (Denmark)

    2010-01-01

    The present application discloses a method for preparing and rendering hydrophilic a nanoporous material of a polymer matrix which has a porosity of 0.1-90 percent (v/v), such that the ratio between the final water absorption (percent (w/w)) and the porosity (percent (v/v)) is at least 0.05, the ......The present application discloses a method for preparing and rendering hydrophilic a nanoporous material of a polymer matrix which has a porosity of 0.1-90 percent (v/v), such that the ratio between the final water absorption (percent (w/w)) and the porosity (percent (v/v)) is at least 0.......05, the method comprising the steps of: (a) preparing a precursor material comprising at least one polymeric component and having a first phase and a second phase; (b) removal of at least a part of the first phase of the precursor material prepared in step (a) so as to leave behind a nanoporous material...... of the polymer matrix; (c) irradiating at least a part of said nanoporous material with light of a wave length of in the range of 250-400 nm (or 200-700 nm) in the presence of oxygen and/or ozone. Corresponding hydrophilic nanoporous materials are also disclosed. L...

  8. Safeguards for special nuclear materials

    International Nuclear Information System (INIS)

    Carlson, R.L.

    1979-12-01

    Safeguards, accountability, and nuclear materials are defined. The accuracy of measuring nuclear materials is discussed. The use of computers in nuclear materials accounting is described. Measures taken to physically protect nuclear materials are described

  9. Professional Nuclear Materials Management

    International Nuclear Information System (INIS)

    Forcella, A.A.; O'Leary, W.J.

    1966-01-01

    This paper describes the scope of nuclear materials management for a typical power reactor in the United States of America. Since this power reactor is financed by private capital, one of the principal obligations of the reactor operator is to ensure that the investment is protected and will furnish an adequate financial return. Because of the high intrinsic value of nuclear materials, appropriate security and accountability must be continually exercised to minimize losses beyond security and accountability for the nuclear materials. Intelligent forethought and planning must be employed to ensure that additional capital is not lost as avoidable additional costs or loss of revenue in a number of areas. The nuclear materials manager must therefore provide in advance against the following contingencies and maintain constant control or liaison against deviations from planning during (a) pre-reactor acquisition of fuel and fuel elements, (b) in-reactor utilization of the fuel elements, and (c) post-reactor recovery of fuel values. During pre-reactor planning and operations, it is important that the fuel element be designed for economy in manufacture, handling, shipping, and replaceability. The time schedule for manufacturing operations must minimize losses of revenue from unproductive dead storage of high cost materials. For in-reactor operations, the maximum achievable burn-up of the fissionable material must be obtained by means of appropriate fuel rearrangement schemes. Concurrently the unproductive down-time of the reactor for fuel rearrangement, inspections, and the like must be minimized. In the post-reactor period, when the fuel has reached a predetermined depletion of fissionable material, the nuclear materials manager must provide for the most economical reprocessing and recovery of fissionable values and by-products. Nuclear materials management is consequently an essential factor in achieving competitive fuel cycle and unit energy costs with power reactors

  10. High temperature materials

    International Nuclear Information System (INIS)

    2003-01-01

    The aim of this workshop is to share the needs of high temperature and nuclear fuel materials for future nuclear systems, to take stock of the status of researches in this domain and to propose some cooperation works between the different research organisations. The future nuclear systems are the very high temperature (850 to 1200 deg. C) gas cooled reactors (GCR) and the molten salt reactors (MSR). These systems include not only the reactor but also the fabrication and reprocessing of the spent fuel. This document brings together the transparencies of 13 communications among the 25 given at the workshop: 1) characteristics and needs of future systems: specifications, materials and fuel needs for fast spectrum GCR and very high temperature GCR; 2) high temperature materials out of neutron flux: thermal barriers: materials, resistance, lifetimes; nickel-base metal alloys: status of knowledge, mechanical behaviour, possible applications; corrosion linked with the gas coolant: knowledge and problems to be solved; super-alloys for turbines: alloys for blades and discs; corrosion linked with MSR: knowledge and problems to be solved; 3) materials for reactor core structure: nuclear graphite and carbon; fuel assembly structure materials of the GCR with fast neutron spectrum: status of knowledge and ceramics and cermets needs; silicon carbide as fuel confinement material, study of irradiation induced defects; migration of fission products, I and Cs in SiC; 4) materials for hydrogen production: status of the knowledge and needs for the thermochemical cycle; 5) technologies: GCR components and the associated material needs: compact exchangers, pumps, turbines; MSR components: valves, exchangers, pumps. (J.S.)

  11. Thermal fatigue. Materials modelling

    International Nuclear Information System (INIS)

    Siegele, D.; Fingerhuth, J.; Mrovec, M.

    2012-01-01

    In the framework of the ongoing joint research project 'Thermal Fatigue - Basics of the system-, outflow- and material-characteristics of piping under thermal fatigue' funded by the German Federal Ministry of Education and Research (BMBF) fundamental numerical and experimental investigations on the material behavior under transient thermal-mechanical stress conditions (high cycle fatigue V HCF and low cycle fatigue - LCF) are carried out. The primary objective of the research is the further development of simulation methods applied in safety evaluations of nuclear power plant components. In this context the modeling of crack initiation and growth inside the material structure induced by varying thermal loads are of particular interest. Therefore, three scientific working groups organized in three sub-projects of the joint research project are dealing with numerical modeling and simulation at different levels ranging from atomistic to micromechanics and continuum mechanics, and in addition corresponding experimental data for the validation of the numerical results and identification of the parameters of the associated material models are provided. The present contribution is focused on the development and experimental validation of material models and methods to characterize the damage evolution and the life cycle assessment as a result of thermal cyclic loading. The individual purposes of the subprojects are as following: - Material characterization, Influence of temperature and surface roughness on fatigue endurances, biaxial thermo-mechanical behavior, experiments on structural behavior of cruciform specimens and scatter band analysis (IfW Darmstadt) - Life cycle assessment with micromechanical material models (MPA Stuttgart) - Life cycle assessment with atomistic and damage-mechanical material models associated with material tests under thermal fatigue (Fraunhofer IWM, Freiburg) - Simulation of fatigue crack growth, opening and closure of a short crack under

  12. Photopolymer holographic recording material

    Science.gov (United States)

    Lawrence, J. R.; O'Neill, F. T.; Sheridan, J. T.

    Photopolymers are promising materials for use in holography. They have many advantages, such as ease of preparation, and are capable of efficiencies of up to 100%. A disadvantage of these materials is their inability to record high spatial frequency gratings when compared to other materials such as dichromated gelatin and silver halide photographic emulsion. Until recently, the drop off at high spatial frequencies of the material response was not predicted by any of the diffusion based models available. It has recently been proposed that this effect is due to polymer chains growing away from their initiation point and causing a smeared profile to be recorded. This is termed a non-local material response. Simple analytic expressions have been derived using this model and fits to experimental data have allowed values to be estimated for material parameters such as the diffusion coefficient of monomer, the ratio of polymerisation rate to diffusion rate and the distance that the polymer chains spread during holographic recording. The model predicts that the spatial frequency response might be improved by decreasing the mean polymer chain lengths and/or by increasing the mobility of the molecules used in the material. The experimental work carried out to investigate these predictions is reported here. This work involved (a) the changing of the molecular weights of chemical components within the material (dyes and binders) and (b) the addition of a chemical retarder in order to shorten the polymer chains, thereby decreasing the extent of the non-local effect. Although no significant improvement in spatial frequency response was observed the model appears to offer an improved understanding of the operation of the material.

  13. Material control evaluation

    International Nuclear Information System (INIS)

    Waddoups, I.G.; Anspach, D.A.; Abbott, J.A.

    1993-01-01

    Changes in the Department of Energy's (DOE) scope of work have stimulated several laboratories and commercial companies to develop and apply technology to enhance nuclear material control. Accountability, inventory, radiation exposure, and insider protection concerns increase as many DOE facilities require increased storage. This paper summarizes a study of the existing material control technologies. The goal of the study is to identify, characterize, and quantify the trade-offs associated with using these technologies to provide real-time information on stored nuclear material that in turn supports decreasing the frequency of inventories conducted by site personnel

  14. Fusion Reactor Materials

    International Nuclear Information System (INIS)

    Decreton, M.

    2000-01-01

    SCK-CEN's research and development programme on fusion reactor materials includes: (1) the study of the mechanical behaviour of structural materials under neutron irradiation (including steels, inconel, molybdenum, chromium); (2) the determination and modelling of the characteristics of irradiated first wall materials such as beryllium; (3) the detection of abrupt electrical degradation of insulating ceramics under high temperature and neutron irradiation; (4) the study of the dismantling and waste disposal strategy for fusion reactors.; (5) a feasibility study for the testing of blanket modules under neutron radiation. Main achievements in these topical areas in the year 1999 are summarised

  15. Hydrogen bonded supramolecular materials

    CERN Document Server

    Li, Zhan-Ting

    2015-01-01

    This book is an up-to-date text covering topics in utilizing hydrogen bonding for constructing functional architectures and supramolecular materials. The first chapter addresses the control of photo-induced electron and energy transfer. The second chapter summarizes the formation of nano-porous materials. The following two chapters introduce self-assembled gels, many of which exhibit unique functions. Other chapters cover the advances in supramolecular liquid crystals and the versatility of hydrogen bonding in tuning/improving the properties and performance of materials. This book is designed

  16. Reliability of construction materials

    International Nuclear Information System (INIS)

    Merz, H.

    1976-01-01

    One can also speak of reliability with respect to materials. While for reliability of components the MTBF (mean time between failures) is regarded as the main criterium, this is replaced with regard to materials by possible failure mechanisms like physical/chemical reaction mechanisms, disturbances of physical or chemical equilibrium, or other interactions or changes of system. The main tasks of the reliability analysis of materials therefore is the prediction of the various failure reasons, the identification of interactions, and the development of nondestructive testing methods. (RW) [de

  17. Electro photographic materials

    International Nuclear Information System (INIS)

    Buzdugan, A.; Andries, A.; Iovu, M.

    2000-01-01

    The invention relates to the creation of electro photographic materials . The invention allows to extend the material photosensitivity into the infrared range of the spectrum. An electro photographic materials contains an electro conducting base, including a dielectric base 1, for example glass, an electro conducting layer 2, for example of Al, Ni, Cr, an injecting layer 3, consisting of amorphous indium phosphide, a vitreous layer 4 of the arsenic sulphide - antimony sulphide system and a transporting layer 5 of the arsenic sulphide or arsenic selenide

  18. 'Material unaccounted for' (MUF)

    International Nuclear Information System (INIS)

    1977-01-01

    MUF is an item of importance in materials accounting measures now embodied in international safeguard arrangements, and in recent public debates requests have been made that the figures for MUF appearing in the Atomic Energy Authority and British Nuclear Fuels Ltd. records should be published. Joint statements issued by the UKAEA and BNFL in July 1977 are here published. These statements describe the procedures for nuclear materials accounting at AEA and BNFL sites and the nature of the inventory differences (MUF) that arise in all nuclear materials accounting operations. Figures for highly enriched U and Pu are included. (U.K.)

  19. RADIOACTIVE MATERIALS SENSORS

    International Nuclear Information System (INIS)

    Mayo, Robert M.; Stephens, Daniel L.

    2009-01-01

    Providing technical means to detect, prevent, and reverse the threat of potential illicit use of radiological or nuclear materials is among the greatest challenges facing contemporary science and technology. In this short article, we provide brief description and overview of the state-of-the-art in sensor development for the detection of radioactive materials, as well as an identification of the technical needs and challenges faced by the detection community. We begin with a discussion of gamma-ray and neutron detectors and spectrometers, followed by a description of imaging sensors, active interrogation, and materials development, before closing with a brief discussion of the unique challenges posed in fielding sensor systems.

  20. Treating carbonaceous materials

    Energy Technology Data Exchange (ETDEWEB)

    Pier, M

    1929-08-26

    To separate the constituents or conversion products, which are liquid or which liquefy when heated, from solid distillable carbonaceous materials such as coals, oil shales, or other bituminous substances, the initial materials are subjected to a destructive hydrogenation under mild conditions so that the formation of benzines is substantially avoided, after which the material is subjected to an extraction treatment with solvents. The constituents of high boiling point range, suitable for the production of lubricating oils and solid paraffins, obtained by the said destructive hydrogenation are separated off before or/and after the said extraction treatment.

  1. Mechanics of soft materials

    CERN Document Server

    Volokh, Konstantin

    2016-01-01

    This book provides a concise introduction to soft matter modelling. It offers an up-to-date review of continuum mechanical description of soft and biological materials from the basics to the latest scientific materials. It includes multi-physics descriptions, such as chemo-, thermo-, electro- mechanical coupling. It derives from a graduate course at Technion that has been established in recent years. It presents original explanations for some standard materials and features elaborated examples on all topics throughout the text. PowerPoint lecture notes can be provided to instructors. .

  2. Electrically conductive composite material

    Science.gov (United States)

    Clough, Roger L.; Sylwester, Alan P.

    1989-01-01

    An electrically conductive composite material is disclosed which comprises a conductive open-celled, low density, microcellular carbon foam filled with a non-conductive polymer or resin. The composite material is prepared in a two-step process consisting of first preparing the microcellular carbon foam from a carbonizable polymer or copolymer using a phase separation process, then filling the carbon foam with the desired non-conductive polymer or resin. The electrically conductive composites of the present invention has a uniform and consistant pattern of filler distribution, and as a result is superior over prior art materials when used in battery components, electrodes, and the like.

  3. Fusion Reactor Materials

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2000-07-01

    SCK-CEN's research and development programme on fusion reactor materials includes: (1) the study of the mechanical behaviour of structural materials under neutron irradiation (including steels, inconel, molybdenum, chromium); (2) the determination and modelling of the characteristics of irradiated first wall materials such as beryllium; (3) the detection of abrupt electrical degradation of insulating ceramics under high temperature and neutron irradiation; (4) the study of the dismantling and waste disposal strategy for fusion reactors.; (5) a feasibility study for the testing of blanket modules under neutron radiation. Main achievements in these topical areas in the year 1999 are summarised.

  4. Multifunctional materials and modeling

    CERN Document Server

    Korepanov, M A; Zaikov, Gennady E; Haghi, A K

    2015-01-01

    This important book presents a valuable collection of new research and new trends in nanomaterials, mesoscopy, quantum chemistry, and chemical physics processes. It highlights the development of nanomaterials as well as investigation of combustion and explosion processes. It highlights new trends in processes and methods of the treatment of polymeric materials and also covers material modification, including super small quantities of metal/carbon nanocomposites as well as new information on the modeling of processes and quantum calculations. Nonlinear kinetic appearances and their applications are highlighted as well. The chapters are divided into three major sections: computational modeling, surface and interface investigations, and nanochemistry, nanomaterials, and nanostructured materials.

  5. Materials science symposium 'materials science using accelerators'

    International Nuclear Information System (INIS)

    Ishii, Tetsuro; Asai, Masato; Chimi, Yasuhiro

    2005-07-01

    The facility of the JAERI-Tokai tandem accelerator and its booster has been contributing to advancing heavy-ion sciences in the fields of nuclear physics, nuclear chemistry, atomic and solid-state physics and materials science, taking advantage of its prominent performance of heavy-ion acceleration. This facility was recently upgraded by changing the acceleration tubes and installing an ECR ion-source at the terminal. The radioactive nuclear beam facility (Tokai Radioactive Ion Accelerator Complex, TRIAC) was also installed by the JAERI-KEK joint project. On this occasion, this meeting was held in order to provide a new step for the advancement of heavy-ion science, and to exchange information on recent activities and future plans using the tandem facility as well as on promising new experimental techniques. This meeting was held at Tokai site of JAERI on January 6th and 7th in 2005, having 24 oral presentations, and was successfully carried out with as many as 90 participants and lively discussions among scientists from all the fields of heavy-ion science, including solid-sate physics, nuclear physics and chemistry, and accelerator physics. This summary is the proceedings of this meeting. We would like to thank all the staffs of the accelerators section, participants and office workers in the Department of Materials Science for their support. The 24 of the presented papers are indexed individually. (J.P.N.)

  6. Phase-change materials handbook

    Science.gov (United States)

    Hale, D. V.; Hoover, M. J.; Oneill, M. J.

    1972-01-01

    Handbook describes relationship between phase-change materials and more conventional thermal control techniques and discusses materials' space and terrestrial applications. Material properties of most promising phase-change materials and purposes and uses of metallic filler materials in phase-change material composites are provided.

  7. Electrically conductive material

    Science.gov (United States)

    Singh, J.P.; Bosak, A.L.; McPheeters, C.C.; Dees, D.W.

    1993-09-07

    An electrically conductive material is described for use in solid oxide fuel cells, electrochemical sensors for combustion exhaust, and various other applications possesses increased fracture toughness over available materials, while affording the same electrical conductivity. One embodiment of the sintered electrically conductive material consists essentially of cubic ZrO[sub 2] as a matrix and 6-19 wt. % monoclinic ZrO[sub 2] formed from particles having an average size equal to or greater than about 0.23 microns. Another embodiment of the electrically conductive material consists essentially at cubic ZrO[sub 2] as a matrix and 10-30 wt. % partially stabilized zirconia (PSZ) formed from particles having an average size of approximately 3 microns. 8 figures.

  8. Transport of radioactive materials

    International Nuclear Information System (INIS)

    1988-07-01

    The norm which establishes the requirements of radiation protection and safety related to the transport of radioactive materials, aiming to keep a suitable control level of eventual exposure of personnels, materials and environment of ionizing radiation, including: specifications on radioactive materials for transport, selection of package type; specification of requirements of the design and assays of acceptance of packages; disposal related to the transport; and liability and administrative requirements, are presented. This norm is applied to: truckage, water carriage and air service; design, fabrication, assays and mantenaince of packages; preparation, despatching, handling, loading storage in transition and reception in the ultimate storage of packages; and transport of void packages which have been contained radioactive materials. (M.C.K.) [pt

  9. Materials Test Station

    Data.gov (United States)

    Federal Laboratory Consortium — When completed, the Materials Test Station at the Los Alamos Neutron Science Center will meet mission need. MTS will provide the only fast-reactor-like irradiation...

  10. Guest Editorial - Smart materials

    Czech Academy of Sciences Publication Activity Database

    Barber, Z. H.; Clyne, T. W.; Šittner, Petr

    2014-01-01

    Roč. 30, 13a (2014), s. 1515-1516 ISSN 0267-0836 Institutional support: RVO:68378271 Keywords : smart materials * shape memory effect (SME) Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.995, year: 2014

  11. Molecules to Materials

    Indian Academy of Sciences (India)

    clay and wood and the technology consisted' in reshaping and restructuring physically these ... are completely and drastically modified. Though not known ... application of these materials was based primarily on their electrical, magnetic ...

  12. Laser material processing

    CERN Document Server

    Steen, William

    2010-01-01

    This text moves from the basics of laser physics to detailed treatments of all major materials processing techniques for which lasers are now essential. New chapters cover laser physics, drilling, micro- and nanomanufacturing and biomedical laser processing.

  13. New Materials Design

    National Research Council Canada - National Science Library

    Voth, Gregory

    1999-01-01

    Progress has been made on several projects under the Challenge Project award. In the area of high energy density materials, calculations are under way on Al atoms embedded in clusters of H2 molecule...

  14. Radioactive Material Containment Bags

    National Research Council Canada - National Science Library

    2000-01-01

    The audit was requested by Senator Joseph I. Lieberman based on allegations made by a contractor, Defense Apparel Services, about the Navy's actions on three contracts for radioactive material containment bags...

  15. Testing of abrasion materials

    International Nuclear Information System (INIS)

    Hummert, G.

    1983-01-01

    A method of abrasion testing according to ASTM C 704-76 a is presented for steel fibre concrete mortar, fusion-cast basalt and a surface coating material and results of practical interest are mentioned. Due to the high technical demands on these materials and their specific fields of application, the very first test already supplied interesting findings. From the user's point of view, the method is an interesting alternative to the common test methods, e.g. according to DIN 52 108 (wheel test according to Boehme). In English-speaking countries, testing according to ASTM is often mandatory in the refractory industry in order to assure constant quality of refractory materials after setting. The method is characterized by good comparability and high accuracy of measurement. Only the test piece is exchanged while the test conditions remain constant, so that accurate information on the material studied is obtained. (orig.) [de

  16. Photoconductivity in Dirac materials

    International Nuclear Information System (INIS)

    Shao, J. M.; Yang, G. W.

    2015-01-01

    Two-dimensional (2D) Dirac materials including graphene and the surface of a three-dimensional (3D) topological insulator, and 3D Dirac materials including 3D Dirac semimetal and Weyl semimetal have attracted great attention due to their linear Dirac nodes and exotic properties. Here, we use the Fermi’s golden rule and Boltzmann equation within the relaxation time approximation to study and compare the photoconductivity of Dirac materials under different far- or mid-infrared irradiation. Theoretical results show that the photoconductivity exhibits the anisotropic property under the polarized irradiation, but the anisotropic strength is different between 2D and 3D Dirac materials. The photoconductivity depends strongly on the relaxation time for different scattering mechanism, just like the dark conductivity

  17. Reversible hydrogen storage materials

    Science.gov (United States)

    Ritter, James A [Lexington, SC; Wang, Tao [Columbia, SC; Ebner, Armin D [Lexington, SC; Holland, Charles E [Cayce, SC

    2012-04-10

    In accordance with the present disclosure, a process for synthesis of a complex hydride material for hydrogen storage is provided. The process includes mixing a borohydride with at least one additive agent and at least one catalyst and heating the mixture at a temperature of less than about 600.degree. C. and a pressure of H.sub.2 gas to form a complex hydride material. The complex hydride material comprises MAl.sub.xB.sub.yH.sub.z, wherein M is an alkali metal or group IIA metal, Al is the element aluminum, x is any number from 0 to 1, B is the element boron, y is a number from 0 to 13, and z is a number from 4 to 57 with the additive agent and catalyst still being present. The complex hydride material is capable of cyclic dehydrogenation and rehydrogenation and has a hydrogen capacity of at least about 4 weight percent.

  18. Nuclear material operations manual

    International Nuclear Information System (INIS)

    Tyler, R.P.

    1981-02-01

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  19. Materials Genome Initiative

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop computational tools to assist in the manufacture, design and certification of new materials and processes. These tools will reduce the time and costs to...

  20. Advanced EDL Materials (AEDLM)

    Data.gov (United States)

    National Aeronautics and Space Administration — Via the exploration of alternate resins and substrate materials for ablative TPS, and the development of new high heat flux resistant flexible TPS systems, we intend...

  1. Ceramic breeder materials

    International Nuclear Information System (INIS)

    Johnson, C.E.

    1990-01-01

    The breeding blanket is a key component of the fusion reactor because it directly involves tritium breeding and energy extraction, both of which are critical to development of fusion power. The lithium ceramics continue to show promise as candidate breeder materials. This promise was recognized by the International Thermonuclear Reactor (ITER) design team in its selection of ceramics as the first option for the ITER breeder material. Blanket design studies have indicated properties in the candidate materials data base that need further investigation. Current studies are focusing on tritium release behavior at high burnup, changes in thermophysical properties with burnup, compatibility between the ceramic breeder and beryllium multiplier, and phase changes with burnup. Laboratory and in-reactor tests, some as part of an international collaboration for development of ceramic breeder materials, are underway. 32 refs., 1 fig., 1 tab

  2. Fissile material proliferation risk

    International Nuclear Information System (INIS)

    Dreicer, J.S.; Rutherford, D.A.

    1996-01-01

    The proliferation risk of a facility depends on the material attractiveness, level of safeguards, and physical protection applied to the material in conjunction with an assessment of the impact of the socioeconomic circumstances and threat environment. Proliferation risk is a complementary extension of proliferation resistance. The authors believe a better determination of nuclear proliferation can be achieved by establishing the proliferation risk for facilities that contain nuclear material. Developing a method that incorporates the socioeconomic circumstances and threat environment inherent to each country enables a global proliferation assessment. To effectively reduce the nuclear danger, a broadly based set of criteria is needed that provides the capability to relatively assess a wide range of nuclear related sites and facilities in different countries and still ensure a global decrease in proliferation risk for fissile material (plutonium and highly enriched uranium)

  3. Nuclear fuel cladding material

    International Nuclear Information System (INIS)

    Nakahigashi, Shigeo.

    1982-01-01

    Purpose: To largely improve the durability and the safety of fuel cladding material. Constitution: Diffusion preventive layers, e.g., aluminum or the like are covered on both sides of a zirconium alloy base layer of thin material, and corrosion resistant layers, e.g., copper or the like are covered thereon. This thin plate material is intimately wound in a circularly tubular shape in a plurality of layers to form a fuel cladding tube. With such construction, corrosion of the tube due to fuel and impurity can be prevented by the corrosion resistant layers, and the diffusion of the corrosion resistant material to the zirconium alloy can be prevented by the diffusion preventive layers. Since a plurality of layers are cladded, even if the corrosion resistant layers are damaged or cracked due to stress corrosion, only one layer is damaged or cracked, but the other layers are not affected. (Sekiya, K.)

  4. Materials research at CMAM

    International Nuclear Information System (INIS)

    Zucchiatti, Alessandro

    2013-01-01

    The Centro de Micro Analisis de Materiales (CMAM) is a research centre of the Universidad Autónoma de Madrid dedicated to the modification and analysis of materials using ion beam techniques. The infrastructure, based on a HVEE 5MV tandem accelerator, provided with a coaxial Cockcroft Walton charging system, is fully open to research groups of the UAM, to other public research institutions and to private enterprises. The CMAM research covers a few important lines such as advanced materials, surface science, biomedical materials, cultural heritage, materials for energy production. The Centre gives as well support to university teaching and technical training. A detail description of the research infrastructures and their use statistics will be given. Some of the main research results will be presented to show the progress of research in the Centre in the past few years and to motivate the strategic plans for the forthcoming

  5. Materials Sciences Programs

    International Nuclear Information System (INIS)

    1977-01-01

    A compilation and index of the ERDA materials sciences program is presented. This compilation is intended for use by administrators, managers, and scientists to help coordinate research and as an aid in selecting new programs

  6. Nuclear material operations manuals

    International Nuclear Information System (INIS)

    Tyler, R.P.

    1979-06-01

    This manual is intended to provide a concise and comprehensive documentation of the operating procedures currently practiced at Sandia Laboratories with regard to the management, control, and accountability of radioactive and nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  7. Treating carbonaceous materials

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, T D

    1927-07-29

    Coal, lignite, shale, peat, or like carbonaceous material is heated at 70 to 300/sup 0/C with an alkaline solution of sodium, potassium, or ammonium oleate and aluminum sulfate is added in order to solidify the oleate. The solid material is separated and molded or shaped or disintegrated for use as a pigment or mixed with rubber or similar compounds such as solidified, oxidized or polymerized oils in making building blocks or tiles, tires, footwear, or other resilient material. It may be distilled with water or steam in a retort to make gas, or in porous condition can be burnt. The liquid products may be subjected to fractional distillation or mixed with bitumen, resin or oils or materials such as clay, red oxide, or barytes to give colour or body in the manufacture of waterproof heatproof dressings which may be made quick-drying by the addition of ammonia, or for mixing with or spreading over stones or on roads or concrete.

  8. Rapidly processable radiographic material

    International Nuclear Information System (INIS)

    Brabandere, L.A. de; Borginon, H.A.; Pattyn, H.A.; Pollet, R.J.

    1981-01-01

    A new rapidly processable radiographic silver halide material is described for use in mammography and non-destructive testing of industrial materials. The radiographic material is used for direct exposure to penetrating radiation without the use of fluorescent-intensifying screens. It consists of a transparent support with a layer of hydrophilic colloid silver halide emulsion on one or both sides. Examples of the preparation of three different silver halide emulsions are given including the use of different chemical sensitizers. These new radiographic materials have good resistance to the formation of pressure marks in rapid processing apparatus and they have improved sensitivity for direct exposure to penetrating radiation compared to conventional radiographic emulsions. (U.K.)

  9. Materials research at CMAM

    Science.gov (United States)

    Zucchiatti, Alessandro

    2013-07-01

    The Centro de Micro Analisis de Materiales (CMAM) is a research centre of the Universidad Autónoma de Madrid dedicated to the modification and analysis of materials using ion beam techniques. The infrastructure, based on a HVEE 5MV tandem accelerator, provided with a coaxial Cockcroft Walton charging system, is fully open to research groups of the UAM, to other public research institutions and to private enterprises. The CMAM research covers a few important lines such as advanced materials, surface science, biomedical materials, cultural heritage, materials for energy production. The Centre gives as well support to university teaching and technical training. A detail description of the research infrastructures and their use statistics will be given. Some of the main research results will be presented to show the progress of research in the Centre in the past few years and to motivate the strategic plans for the forthcoming.

  10. Materials engineering data base

    Science.gov (United States)

    1995-01-01

    The various types of materials related data that exist at the NASA Marshall Space Flight Center and compiled into databases which could be accessed by all the NASA centers and by other contractors, are presented.

  11. Educational Materials - Burn Wise

    Science.gov (United States)

    Burn Wise outreach material. Burn Wise is a partnership program of that emphasizes the importance of burning the right wood, the right way, in the right wood-burning appliance to protect your home, health, and the air we breathe.

  12. Biological Responses to Materials

    Science.gov (United States)

    Anderson, James M.

    2001-08-01

    All materials intended for application in humans as biomaterials, medical devices, or prostheses undergo tissue responses when implanted into living tissue. This review first describes fundamental aspects of tissue responses to materials, which are commonly described as the tissue response continuum. These actions involve fundamental aspects of tissue responses including injury, inflammatory and wound healing responses, foreign body reactions, and fibrous encapsulation of the biomaterial, medical device, or prosthesis. The second part of this review describes the in vivo evaluation of tissue responses to biomaterials, medical devices, and prostheses to determine intended performance characteristics and safety or biocompatibility considerations. While fundamental aspects of tissue responses to materials are important from research and development perspectives, the in vivo evaluation of tissue responses to these materials is important for performance, safety, and regulatory reasons.

  13. Material Religion - Hinduism

    DEFF Research Database (Denmark)

    Aktor, Mikael

    2017-01-01

    Comprehensive bibliography on material religion in Hinduism. Monographs, anthologies, anthology chapters, journal articles, web articles, documentation on cultic elements of the landscape (mountains, rivers, trees, stones), three- and two-dimensional cultic artefacts, textiles, ritual accessories...

  14. Optimized manufacturable porous materials

    DEFF Research Database (Denmark)

    Andreassen, Erik; Andreasen, Casper Schousboe; Jensen, Jakob Søndergaard

    Topology optimization has been used to design two-dimensional material structures with specific elastic properties, but optimized designs of three-dimensional material structures are more scarsely seen. Partly because it requires more computational power, and partly because it is a major challenge...... to include manufacturing constraints in the optimization. This work focuses on incorporating the manufacturability into the optimization procedure, allowing the resulting material structure to be manufactured directly using rapid manufacturing techniques, such as selective laser melting/sintering (SLM....../S). The available manufacturing methods are best suited for porous materials (one constituent and void), but the optimization procedure can easily include more constituents. The elasticity tensor is found from one unit cell using the homogenization method together with a standard finite element (FE) discretization...

  15. Fracture in Soft Materials

    DEFF Research Database (Denmark)

    Hassager, Ole

    Fracture is a phenomenon that is generally associated with solids. A key element in fracture theory is the so-called weakest link idea that fracture initiates from the largest pre-existing material imperfection. However, recent work has demonstrated that fracture can also happen in liquids, where...... surface tension will act to suppress such imperfections. Therefore, the weakest link idea does not seem immediately applicable to fracture in liquids. This presentation will review fracture in liquids and argue that fracture in soft liquids is a material property independent of pre-existing imperfections....... The following questions then emerge: What is the material description needed to predict crack initiation, crack speed and crack shape in soft materials and liquids....

  16. Evaluation of learning materials

    DEFF Research Database (Denmark)

    Bundsgaard, Jeppe; Hansen, Thomas Illum

    2011-01-01

    This paper presents a holistic framework for evaluating learning materials and designs for learning. A holistic evaluation comprises investigations of the potential learning potential, the actualized learning potential, and the actual learning. Each aspect is explained and exemplified through...

  17. Objects, materiality and meaning

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Lindegaard, Hanne

    2008-01-01

    The present research work investigates the relation between physical objects, their materiality, understood as the physical substances they are made from, and the communication from the objects. In product design of physical objects the communicative aspects are just as important as the function...... of the object, and the designers aim is therefore to tune both in order to achieve a desired goal. To do so the designer basically has 2 options: Alteration of the physical shape of the object and the selection of materials. Through the manipulation of shape and materials can symbolic and sensory information...... be written into the object. The materials are therefore carriers of communication, even though this is dependent of the cultural context and the environment which the object will be part of. However the designer has only minor influence on those....

  18. Spacecraft Material Outgassing Data

    Data.gov (United States)

    National Aeronautics and Space Administration — This compilation of outgassing data of materials intended for spacecraft use were obtained at the Goddard Space Flight Center (GSFC), utilizing equipment developed...

  19. Relativistic theories of materials

    CERN Document Server

    Bressan, Aldo

    1978-01-01

    The theory of relativity was created in 1905 to solve a problem concerning electromagnetic fields. That solution was reached by means of profound changes in fundamental concepts and ideas that considerably affected the whole of physics. Moreover, when Einstein took gravitation into account, he was forced to develop radical changes also in our space-time concepts (1916). Relativistic works on heat, thermodynamics, and elasticity appeared as early as 1911. However, general theories having a thermodynamic basis, including heat conduction and constitutive equations, did not appear in general relativity until about 1955 for fluids and appeared only after 1960 for elastic or more general finitely deformed materials. These theories dealt with materials with memory, and in this connection some relativistic versions of the principle of material indifference were considered. Even more recently, relativistic theories incorporating finite deformations for polarizable and magnetizable materials and those in which couple s...

  20. Moldable cork ablation material

    Science.gov (United States)

    1977-01-01

    A successful thermal ablative material was manufactured. Moldable cork sheets were tested for density, tensile strength, tensile elongation, thermal conductivity, compression set, and specific heat. A moldable cork sheet, therefore, was established as a realistic product.

  1. Fission reactors and materials

    International Nuclear Information System (INIS)

    Frost, B.R.T.

    1981-12-01

    The American-designed boiling water reactor and pressurized water reactor dominate the designs currently in use and under construction worldwide. As in all energy systems, materials problems have appeared during service; these include stress-corrosion of stainless steel pipes and heat exchangers and questions regarding crack behavior in pressure vessels. To obtain the maximum potential energy from our limited uranium supplies is is essential to develop the fast breeder reactor. The materials in these reactors are subjected to higher temperatures and neutron fluxes but lower pressures than in the water reactors. The performance required of the fuel elements is more arduous in the breeder than in water reactors. Extensive materials programs are in progress in test reactors and in large test rigs to ensure that materials will be available to meet these conditions

  2. Foreign material exclusion program

    International Nuclear Information System (INIS)

    Perez Moreno, J.; Folguera Mateo, M.

    2015-01-01

    Foreign material is any element that is not part of the system as it has been designed. For example dirt, loose parts, wires, chips, etc. that may affect the operation of the system or component. (Author)

  3. Nuclear material operations manual

    International Nuclear Information System (INIS)

    Tyler, R.P.; Gassman, L.D.

    1978-04-01

    This manual is intended to provide a concise and comprehensive documentation of the operating procedures currently practiced at Sandia Laboratories with regard to the management, control, and accountability of radioactive and nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations--management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of ''play-scripts'' in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  4. Mechanics of moving materials

    CERN Document Server

    Banichuk, Nikolay; Neittaanmäki, Pekka; Saksa, Tytti; Tuovinen, Tero

    2014-01-01

    This book deals with theoretical aspects of modelling the mechanical behaviour of manufacturing, processing, transportation or other systems in which the processed or supporting material is travelling through the system. Examples of such applications include paper making, transmission cables, band saws, printing presses, manufacturing of plastic films and sheets, and extrusion of aluminium foil, textiles and other materials.   The work focuses on out-of-plane dynamics and stability analysis for isotropic and orthotropic travelling elastic and viscoelastic materials, with and without fluid-structure interaction, using analytical and semi-analytical approaches.  Also topics such as fracturing and fatigue are discussed in the context of moving materials. The last part of the book deals with optimization problems involving physical constraints arising from the stability and fatigue analyses, including uncertainties in the parameters.   The book is intended for researchers and specialists in the field, providin...

  5. Radioactivity of building materials

    International Nuclear Information System (INIS)

    Terpakova, E.

    2000-01-01

    In this paper the gamma-spectrometric determination of natural radioactivity in the different building materials and wares applied in Slovakia was performed. The specific activities for potassium-40, thorium, radium as well as the equivalent specific activities are presented

  6. Construction and material specification

    Science.gov (United States)

    2002-01-01

    These Construction and Material Specifications are written to the Bidder before award of the : Contract and to the Contractor after award of the Contract. The sentences that direct the Contractor to perform Work are written as commands. For example, ...

  7. The Materiality of Learning

    DEFF Research Database (Denmark)

    Sørensen, Estrid

    or postgraduate students interested in a variety of fields, including educational studies, educational psychology, social anthropology, and STS. Original ethnographic descriptions showing the fine details of how materials influence the learning process Introduces the advanced and complex Actor-Network Theory......The field of educational research lacks a methodology for the study of learning that does not begin with humans, their aims, and their interests. The Materiality of Learning seeks to overcome this human-centered mentality by developing a novel spatial approach to the materiality of learning....... Drawing on science and technology studies (STS), Estrid Sørensen compares an Internet-based 3D virtual environment project in a fourth-grade class with the class's work with traditional learning materials, including blackboards, textbooks, notebooks, pencils, and rulers. Taking into account pupils...

  8. 2002 materials report

    International Nuclear Information System (INIS)

    2003-01-01

    This report is the very first devoted to the researches carried out in all centres of the French atomic energy commission (CEA) in the domain of materials. Each material, technology or process is presented with some explanations. The report is divided in three chapters dealing with: 1 - the nano-materials and the engineering of surfaces: surface functionalization (new coatings for cutting tools, new CVD process for the deposition of carbon nano-tubes, nano-structured metallic films, polymerization by gaseous phase deposition, electro-chromium systems, functional coatings by sol-gel process, sol-gel processing of optical fibers, modeling of the plasma projection process); nano-particulates and emerging materials (synthesis of SiCN nano-particulates by laser pyrolysis, hot-forming of Si/C/N/O nano-metric powders by isostatic compression, synthesis of aligned carbon nano-tubes by pyrolysis of mixed aerosols, elaboration and characterization of new oxide-type materials in supercritical CO 2 phase, fluorescent semiconductor nano-crystals for labelling, fibrillary proteins and their behaviour at interfaces); 2 - materials engineering and numerical materials (simulation of the welding process by YAG laser pulses, welded joints reliability, control of precipitation microstructures by the addition of nucleating agents, optimization of pressing cycles for the forming of industrial parts by matrix compaction, mechanical and thermal pre-dimensioning of thermo-structural composites, modeling of the behaviour of thermo-structural composites, joints follow up system for innovative welding control process); joining technologies (feasibility study for the fabrication by diffusion welding of the first wall panels of ITER reactor, welding of spent fuel containers for long lasting storage, electron beam welding of aluminium 6061 and hot cracking risk, hybrid welding technology, heat source model for TIG welding, cladding of the amplifying plates of the Megajoule laser facility

  9. Transport of radioactive materials

    International Nuclear Information System (INIS)

    1991-07-01

    The purpose of this Norm is to establish, relating to the TRANSPORT OF RADIOACTIVE MATERIALS, safety and radiological protection requirements to ensure an adequate control level of the eventual exposure of persons, properties and environment to the ionizing radiation comprising: specifications on radioactive materials for transport; package type selection; specification of the package design and acceptance test requirements; arrangements relating to the transport itself; administrative requirements and responsibilities. (author)

  10. Mycotoxins in building materials

    DEFF Research Database (Denmark)

    Nielsen, Kristian Fog; Frisvad, Jens Christian

    2011-01-01

    as in future energy efficient buildings. It brings together different disciplinary points of view on indoor mold, ranging from physics and material science to microbiology and health sciences. The contents have been outlined according to three main issues: Fundamentals, particularly addressing the crucial...... roles of water and materials, Health, including a state-of-the-art description of the health-related effects of indoor molds, and Strategies, integrating remediation, prevention and policies....

  11. Nuclear materials management procedures

    International Nuclear Information System (INIS)

    Veevers, K.; Silver, J.M.; Quealy, K.J.; Steege, E. van der.

    1987-10-01

    This manual describes the procedures for the management of nuclear materials and associated materials at the Lucas Heights Research Laboratories. The procedures are designed to comply with Australia's nuclear non-proliferation obligations to the International Atomic Energy Agency (IAEA), bilateral agreements with other countries and ANSTO's responsibilities under the Nuclear Non-Proliferation (Safeguards) Act, 1987. The manual replaces those issued by the Australian Atomic Energy Commission in 1959, 1960 and 1969

  12. Architects and Materials

    DEFF Research Database (Denmark)

    Kruse Aagaard, Anders

    2015-01-01

    . One of the reasons the digital drawing has become essential is clearly because of the level of interchange and versatility it provides. However, this is also where much capacity is still left unexplored and unused. Digital material has enormous potential to intermingle with the world, in which we live...... and for which architecture is created. Through the interface of digital drawing, data can feed into digital production, linking the architect directly to the materials. Drawing can morph directly into materialisation instead of representation....

  13. Nano semiconducting materials

    CERN Document Server

    Saravanan, R

    2016-01-01

    The main focus of the present book is the characterization of a number of nano-semiconducting materials, using such techniques as powder X-ray diffraction, UV-visible spectrophotometry, Raman spectrometry, scanning electron microscopy, transmission electron microscopy and vibrating sample magnetometry. The materials studied include ZnS, TiO2, NiO, Ga doped ZnO, Mn doped SnO2, Mn doped CeO2 and Mn doped ZrO2.

  14. Supramolecular fluorene based materials

    OpenAIRE

    Abbel, R.J.

    2008-01-01

    This thesis describes the use of noncovalent interactions in order to manipulate and control the self-assembly and morphology of electroactive fluorene-based materials. The supramolecular arrangement of p-conjugated polymers and oligomers can strongly influence their electronic and photophysical properties. Therefore, a detailed understanding of such organisation processes is essential for the optimisation of the performance of these materials as applied in optoelectronic devices. In order to...

  15. Nano-composite materials

    Science.gov (United States)

    Lee, Se-Hee; Tracy, C. Edwin; Pitts, J. Roland

    2010-05-25

    Nano-composite materials are disclosed. An exemplary method of producing a nano-composite material may comprise co-sputtering a transition metal and a refractory metal in a reactive atmosphere. The method may also comprise co-depositing a transition metal and a refractory metal composite structure on a substrate. The method may further comprise thermally annealing the deposited transition metal and refractory metal composite structure in a reactive atmosphere.

  16. Radioactive materials transport

    International Nuclear Information System (INIS)

    Talbi, B.

    1996-01-01

    The development of peaceful applications of nuclear energy results in the increase of transport operations of radioactive materials. Therefore strong regulations on transport of radioactive materials turns out to be a necessity in Tunisia. This report presents the different axes of regulations which include the means of transport involved, the radiation protection of the carriers, the technical criteria of security in transport, the emergency measures in case of accidents and penalties in case of infringement. (TEC). 12 refs., 1 fig

  17. Raw material uranium

    International Nuclear Information System (INIS)

    Arnold, O.

    1975-01-01

    In this paper some aspects are being considered, in as far as they can contribute to a better understanding of uranium as a raw material and an energy carrier, and as they can indicate the possible ways and means open to the German Federal Republic for securing this highly desirable raw material, without becoming even more dependent on the economic and political views of the producing countries, than it is the case in respect of oil. (orig.) [de

  18. Designing Material Materialising Design

    DEFF Research Database (Denmark)

    Nicholas, Paul

    2013-01-01

    Designing Material Materialising Design documents five projects developed at the Centre for Information Technology and Architecture (CITA) at the Royal Danish Academy of Fine Arts, School of Architecture. These projects explore the idea that new designed materials might require new design methods....... Focusing on fibre reinforced composites, this book sustains an exploration into the design and making of elastically tailored architectural structures that rely on the use of computational design to predict sensitive interdependencies between geometry and behaviour. Developing novel concepts...

  19. Teaching materials physics

    International Nuclear Information System (INIS)

    Quere, Y.

    1997-01-01

    The important role of materials and their behaviour under radiation exposure, for nuclear research and industry, is pointed out, and the development of nuclear applied metallurgy research at the Cea and in French Universities is reviewed. The teaching policy at the Cea in the field of materials science involved four action types: laboratory courses and theses, teaching outside and inside the Cea, summer schools, which allowed for a synergetic cooperation between the Cea, Universities and research centers, since the 50's

  20. Beam-Material Interaction

    CERN Document Server

    Mokhov, N.V.

    2016-01-01

    Th is paper is motivated by the growing importance of better understanding of the phenomena and consequences of high- intensity energetic particle beam interactions with accelerator, generic target , and detector components. It reviews the principal physical processes of fast-particle interactions with matter, effects in materials under irradiation, materials response, related to component lifetime and performance, simulation techniques, and methods of mitigating the impact of radiation on the components and envir onment in challenging current and future application

  1. Material Response Characterization

    Science.gov (United States)

    1977-08-01

    models fit to vertical UX and TX data and a mean stress tension cutoff criterion. Because tests on the Kayenta sands one materials had revealed a definite...parameters. 9 This data characterizing the anisotropic response of the upper 30 feet of Kayenta material should not just be filed away; it should be used...9. Johnson, J. N., et al, "Anisotropic Mechanical Properties of Kayenta Sandstone (MIXED COMPANY Site) for Ground Motion Calculations," Terra Tek TR

  2. Fusion reactor materials

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Data are given for each of the following areas: (1) depth distribution of bubbles in 20-keV 4 He + irradiated nickel, (2) surface damage of Al irradiated with 4 He + to high doses, (3) secondary photon emission from ion bombarded surfaces, (4) dosimetry and damage analysis work in support of the MFE materials program, (5) hydrogen permeation and materials behavior in alloys, (6) radiation damage of diagnostic windows in TFTR, and (7) fast neutron irradiations of superconducting Nb 3 Sn

  3. Food Packaging Materials

    Science.gov (United States)

    1978-01-01

    The photos show a few of the food products packaged in Alure, a metallized plastic material developed and manufactured by St. Regis Paper Company's Flexible Packaging Division, Dallas, Texas. The material incorporates a metallized film originally developed for space applications. Among the suppliers of the film to St. Regis is King-Seeley Thermos Company, Winchester, Ma'ssachusetts. Initially used by NASA as a signal-bouncing reflective coating for the Echo 1 communications satellite, the film was developed by a company later absorbed by King-Seeley. The metallized film was also used as insulating material for components of a number of other spacecraft. St. Regis developed Alure to meet a multiple packaging material need: good eye appeal, product protection for long periods and the ability to be used successfully on a wide variety of food packaging equipment. When the cost of aluminum foil skyrocketed, packagers sought substitute metallized materials but experiments with a number of them uncovered problems; some were too expensive, some did not adequately protect the product, some were difficult for the machinery to handle. Alure offers a solution. St. Regis created Alure by sandwiching the metallized film between layers of plastics. The resulting laminated metallized material has the superior eye appeal of foil but is less expensive and more easily machined. Alure effectively blocks out light, moisture and oxygen and therefore gives the packaged food long shelf life. A major packaging firm conducted its own tests of the material and confirmed the advantages of machinability and shelf life, adding that it runs faster on machines than materials used in the past and it decreases product waste; the net effect is increased productivity.

  4. Preparation of thermoluminescent materials

    International Nuclear Information System (INIS)

    1976-01-01

    Thermoluminescent materials have been found to be suitable for measuring long term exposures to low level ionizing radiation. Oxyhalides of lanthanum, gadolinium and yttrium, including the oxychlorides and oxybromides are activated with terbium and have been found to be most efficient oxygendominated phosphors having thermoradiant efficiencies with excitation by low level ionizing radiation. Thermoluminescence response increases when the previous materials have hafnium and zirconium additives

  5. Modeling multiphase materials processes

    CERN Document Server

    Iguchi, Manabu

    2010-01-01

    ""Modeling Multiphase Materials Processes: Gas-Liquid Systems"" describes the methodology and application of physical and mathematical modeling to multi-phase flow phenomena in materials processing. The book focuses on systems involving gas-liquid interaction, the most prevalent in current metallurgical processes. The performance characteristics of these processes are largely dependent on transport phenomena. This volume covers the inherent characteristics that complicate the modeling of transport phenomena in such systems, including complex multiphase structure, intense turbulence, opacity of

  6. Calibration of thermoluminiscent materials

    International Nuclear Information System (INIS)

    Bos, A.J.J.

    1989-07-01

    In this report the relation between exposure and absorbed radiation dose in various materials is represented, on the base of recent data. With the help of this a calibration procedure for thermoluminescent materials, adapted to the IRI radiation standard is still the exposure in rontgen. In switching to the air kerma standard the calibration procedure will have to be adapted. (author). 6 refs.; 4 tabs

  7. Beam-Material Interaction

    Energy Technology Data Exchange (ETDEWEB)

    Mokhov, N. V. [Fermilab; Cerutti, F. [CERN

    2016-01-01

    Th is paper is motivated by the growing importance of better understanding of the phenomena and consequences of high-intensity energetic particle beam interactions with accelerator, generic target, and detector components. It reviews the principal physical processes of fast-particle interactions with matter, effects in materials under irradiation, materials response, related to component lifetime and performance, simulation techniques, and methods of mitigating the impact of radiation on the components and environment in challenging current and future applications.

  8. Biomimetic hydrogel materials

    Science.gov (United States)

    Bertozzi, Carolyn; Mukkamala, Ravindranath; Chen, Qing; Hu, Hopin; Baude, Dominique

    2000-01-01

    Novel biomimetic hydrogel materials and methods for their preparation. Hydrogels containing acrylamide-functionalized carbohydrate, sulfoxide, sulfide or sulfone copolymerized with a hydrophilic or hydrophobic copolymerizing material selected from the group consisting of an acrylamide, methacrylamide, acrylate, methacrylate, vinyl and a derivative thereof present in concentration from about 1 to about 99 wt %. and methods for their preparation. The method of use of the new hydrogels for fabrication of soft contact lenses and biomedical implants.

  9. Radioactive certified reference materials

    International Nuclear Information System (INIS)

    Watanabe, Kazuo

    2010-01-01

    Outline of radioactive certified reference materials (CRM) for the analysis of nuclear materials and radioactive nuclides were described. The nuclear fuel CRMs are supplied by the three institutes: NBL in the US, CETAMA in France and IRMM in Belgium. For the RI CRMs, the Japan Radioisotope Association is engaged in activities concerning supply. The natural-matrix CRMs for the analysis of trace levels of radio-nuclides are prepared and supplied by NIST in the US and the IAEA. (author)

  10. Nanostructured Materials for Magnetoelectronics

    CERN Document Server

    Mikailzade, Faik

    2013-01-01

    This book provides an up-to-date review of nanometer-scale magnetism and focuses on the investigation of the basic properties of magnetic nanostructures. It describes a wide range of physical aspects together with theoretical and experimental methods. A broad overview of the latest developments in this emerging and fascinating field of nanostructured materials is given with emphasis on the practical understanding and operation of submicron devices based on nanostructured magnetic materials.

  11. Distilling carbonaceous materials

    Energy Technology Data Exchange (ETDEWEB)

    Griffiths, C A

    1924-04-15

    In apparatus of the kind set forth for distilling solid carbonaceous materials, a rotary retort in the form of a tubular, hollow cylindrical, or other similar hollow body, of small diameter, having a thin wall is provided to which the heat is applied externally, with means operative within it adapted, not only for cleaning the internal wall of the retort but also for distributing the heat throughout the mass of materials under treatment, substantially as described.

  12. Materials in machine, plant, and apparatus construction

    International Nuclear Information System (INIS)

    Blumenauer, H.; Hampe, E.; Hoehne, D.

    1983-01-01

    The subject is covered under the following headings: principles of materials economy and selection, designation of materials, general construction materials; materials for tools, materials for low temperatures, materials for high temperatures, materials for corrosive stress, materials with high wear resistance and friction materials, sliding and bearing materials, materials for spring load, materials for joints, and materials for nuclear reactors

  13. Distilling carbonaceous materials

    Energy Technology Data Exchange (ETDEWEB)

    Ironside, T G

    1921-09-01

    In the distillation of carbonaceous material such as shale, coal, lignite, wood or liquid hydrocarbons, the material is mixed with a heated granular substance such as sand which supplies the necessary heat. The shale or the like, which may be preheated, is fed from a hopper by a worm conveyer to a tube leading into a retort, and the heated granular material such as sand is supplied from a jacketed container through a tube. On the lower end of a rotary shaft are radial arms to which are fixed angularly disposed blades which serve to mix the shale and hot sand and deliver the residue to a central discharge pipe closed at the bottom by a conical valve which opens when the weight of the superimposed material is sufficient. The distillates are taken off by an outlet. Steam vapor or gas may be supplied to the retort, preferably through a hollow shaft leading to hollow stirrers perforated to permit of the gas passing into the material. The retort may be externally heated by hot gases in the space surrounding the retort, and the latter may be divided by horizontal floors so that the material is caused to funnel from the periphery to the center of the floor, then through a central opening on to the floor next below, and from the center to the periphery of this floor, and so on.

  14. Shape memory materials

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Compared with piezoelectric ceramics and magnetostrictive materials, the shape memory materials possess larger recoverable strain and recovery stress but slower response to external field. It is expected that the magneto-shape memory materials may develop considerable strain as well as rapid and precise shape control. Pseudoelasticity and shape memory effect (SME) resulted from martensitic transformation and its reverse transformation in shape memory materials were generally described. The requirements of appearing the shape memory effect in materials and the criteria for thermoelastic martensitic transformation were given. Some aspects concerning characteristics of martensitic transformation, and factors affecting SME in Ni-Ti, Cu-Zn-Al and Fe-Mn-Si based alloys as well as ZrO2 containing ceramics were briefly reviewed. Thermodynamic calculation of Ms temperature as function of grain size and parent ordering in Cu-Zn-Al was presented. The works on prediction of Ms in Fe-Mn-Si based alloys and in ZrO2-CeO2 were mentioned. Magnetic shape memory materials were briefly introduced.

  15. LDEF materials data bases

    Science.gov (United States)

    Funk, Joan G.; Strickland, John W.; Davis, John M.

    1993-01-01

    The Long Duration Exposure Facility (LDEF) and the accompanying experiments were composed of and contained a wide variety of materials representing the largest collection of materials flown in low Earth orbit (LEO) and retrieved for ground based analysis to date. The results and implications of the mechanical, thermal, optical, and electrical data from these materials are the foundation on which future LEO space missions will be built. The LDEF Materials Special Investigation Group (MSIG) has been charged with establishing and developing data bases to document these materials and their performance to assure not only that the data are archived for future generations but also that the data are available to the spacecraft user community in an easily accessed, user-friendly form. This paper discusses the format and content of the three data bases developed or being developed to accomplish this task. The hardware and software requirements for each of these three data bases are discussed along with current availability of the data bases. This paper also serves as a user's guide to the MAPTIS LDEF Materials Data Base.

  16. Electronic Materials Science

    Science.gov (United States)

    Irene, Eugene A.

    2005-02-01

    A thorough introduction to fundamental principles and applications From its beginnings in metallurgy and ceramics, materials science now encompasses such high- tech fields as microelectronics, polymers, biomaterials, and nanotechnology. Electronic Materials Science presents the fundamentals of the subject in a detailed fashion for a multidisciplinary audience. Offering a higher-level treatment than an undergraduate textbook provides, this text benefits students and practitioners not only in electronics and optical materials science, but also in additional cutting-edge fields like polymers and biomaterials. Readers with a basic understanding of physical chemistry or physics will appreciate the text's sophisticated presentation of today's materials science. Instructive derivations of important formulae, usually omitted in an introductory text, are included here. This feature offers a useful glimpse into the foundations of how the discipline understands such topics as defects, phase equilibria, and mechanical properties. Additionally, concepts such as reciprocal space, electron energy band theory, and thermodynamics enter the discussion earlier and in a more robust fashion than in other texts. Electronic Materials Science also features: An orientation towards industry and academia drawn from the author's experience in both arenas Information on applications in semiconductors, optoelectronics, photocells, and nanoelectronics Problem sets and important references throughout Flexibility for various pedagogical needs Treating the subject with more depth than any other introductory text, Electronic Materials Science prepares graduate and upper-level undergraduate students for advanced topics in the discipline and gives scientists in associated disciplines a clear review of the field and its leading technologies.

  17. Material for desulphurisation. [German patent

    Energy Technology Data Exchange (ETDEWEB)

    Kruse, F; Maus, W

    1979-07-19

    The invention concerns a material in pellet formm for desulphurisation of gases with a high CO/sub 2/ content, particularly sewer gas, where the material consists mainly of iron oxide hydrate, to which a loosening material, binding material and additional materials such as calcium carbonate and furnace slack are added, and which contains combined water. Chemically active iron oxide hydrate material such as material which occurs as remnant in pyrogenic bauxite treatment in aluminium manufacture, bog iron ore, material from water works and similar materials can be used as iron oxide hydrate. Sawdust or turf can be used as loosening material to increase the open porosity.

  18. Visualizing Earth Materials

    Science.gov (United States)

    Cashman, K. V.; Rust, A.; Stibbon, E.; Harris, R.

    2016-12-01

    Earth materials are fundamental to art. They are pigments, they are clay, they provide form and color. Earth scientists, however, rarely attempt to make the physical properties of Earth materials visible through art, and similarly many artists use Earth materials without fully understanding their physical and chemical properties. Here we explore the intersection between art and science through study of the physical properties of Earth materials as characterized in the laboratory, and as transferred to paper using different techniques and suspending media. One focus of this collaboration is volcanic ash. Ash is interesting scientifically because its form provides information on the fundamental processes that drive volcanic eruptions, and determines its transport properties, and thus its potential to affect populations far downwind of the volcano. Ash properties also affect its behavior as an art material. From an aesthetic point of view, ash lends a granular surface to the image; it is also uncontrollable, and thus requires engagement between artist and medium. More fundamentally, using ash in art creates an exchange between the medium and the subject matter, and imparts something of the physical, visceral experience of volcanic landscapes to the viewer. Another component of this work uses powdered rock as a printing medium for geologic maps. Because different types of rock create powders with different properties (grain size distributions and shapes), the geology is communicated not only as color, but also by the physical characteristics of the material as it interacts with the paper. More importantly, the use of actual rocks samples as printing material for geologic maps not only makes a direct connection between the map and the material it represents, but also provides an emotional connection between the map, the viewer and the landscape, its colors, textures and geological juxtapositions. Both case studies provide examples not only of ways in which artists can

  19. Tribological comparison of materials

    Science.gov (United States)

    Shi, Bing

    Approximately 600,000 total joint replacement surgeries are performed each year in the United States. Current artificial joint implants are mainly metal-on-plastic. The synthetic biomaterials undergo degradation through fatigue and corrosive wear from load-bearing and the aqueous ionic environment of the human body. Deposits of inorganic salts can scratch weight-bearing surfaces, making artificial joints stiff and awkward. The excessive wear debris from polyethylene leads to osteolysis and potential loosening of the prosthesis. The lifetime for well-designed artificial joints is at most 10 to 15 years. A patient can usually have two total joint replacements during her/his lifetime. Durability is limited by the body's reaction to wear debris of the artificial joints. Wear of the artificial joints should be reduced. A focus of this thesis is the tribological performance of bearing materials for Total Replacement Artificial Joints (TRAJ). An additional focus is the scaffolds for cell growth from both a tissue engineering and tribological perspective. The tribological properties of materials including Diamond-like Carbon (DLC) coated materials were tested for TRAJ implants. The DLC coatings are chemically inert, impervious to acid and saline media, and are mechanically hard. Carbon-based materials are highly biocompatible. A new alternative to total joints implantation is tissue engineering. Tissue engineering is the replacement of living tissue with tissue that is designed and constructed to meet the needs of the individual patient. Cells were cultured onto the artificial materials, including metals, ceramics, and polymers, and the frictional properties of these materials were investigated to develop a synthetic alternative to orthopedic transplants. Results showed that DLC coated materials had low friction and wear, which are desirable tribological properties for artificial joint material. Cells grew on some of the artificial matrix materials, depending on the

  20. Supply of nuclear materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1959-07-15

    Any large-scale atomic energy programme is inherently dependent on the availability of materials that can be used as fuel in reactors, and the International Atomic Energy Agency, at its inception, was intended to act as a bank for the flow of materials between Member States. According to its Statute, one of its primary functions is to provide materials 'to meet the needs of research on, and development and practical application of, atomic energy for peaceful purposes, including the production of electric power, with due consideration for the needs of the under-developed areas of the world'. If the Agency is to fulfil its Statutory function, it would be essential for it to have not only some ready sources of supply, but also an established framework of general terms and conditions on which it could secure the supplies. The latter would eliminate the need for going through elaborate procedural formalities whenever the Agency receives a new request for materials. Such a framework has now been established with the signing of broad agreements with three countries which had offered to supply various quantities of special fissionable materials to the Agency. These agreements, signed in Vienna on 11 May 1959, with the USSR, the UK and the USA, lay down the basic terms and conditions on which these three countries will make nuclear materials available when needed by the Agency. The USSR has agreed to make available to the Agency 50 kg of uranium-235, the UK 20 kg and the USA 5 000 kg. The material will be supplied in the form of enriched uranium in any concentration up to 20 per cent; the amounts mentioned relate to the 235-isotope content of the materials. The UK and the USA have agreed that the parties to a particular supply agreement may decide on higher enrichment of uranium to be used for research reactors, material testing reactors or for other research purposes. The USA has also agreed to make available to the Agency such additional supplies as would match in amount

  1. BUILDING MATERIALS RECLAMATION PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    David C. Weggel; Shen-En Chen; Helene Hilger; Fabien Besnard; Tara Cavalline; Brett Tempest; Adam Alvey; Madeleine Grimmer; Rebecca Turner

    2010-08-31

    This report describes work conducted on the Building Materials Reclamation Program for the period of September 2008 to August 2010. The goals of the project included selecting materials from the local construction and demolition (C&D) waste stream and developing economically viable reprocessing, reuse or recycling schemes to divert them from landfill storage. Educational resources as well as conceptual designs and engineering feasibility demonstrations were provided for various aspects of the work. The project was divided into two distinct phases: Research and Engineering Feasibility and Dissemination. In the Research Phase, a literature review was initiated and data collection commenced, an advisory panel was organized, and research was conducted to evaluate high volume C&D materials for nontraditional use; five materials were selected for more detailed investigations. In the Engineering Feasibility and Dissemination Phase, a conceptual study for a regional (Mecklenburg and surrounding counties) collection and sorting facility was performed, an engineering feasibility project to demonstrate the viability of recycling or reuse schemes was created, the literature review was extended and completed, and pedagogical materials were developed. Over the two-year duration of the project, all of the tasks and subtasks outlined in the original project proposal have been completed. The Final Progress Report, which briefly describes actual project accomplishments versus the tasks/subtasks of the original project proposal, is included in Appendix A of this report. This report describes the scientific/technical aspects (hypotheses, research/testing, and findings) of six subprojects that investigated five common C&D materials. Table 1 summarizes the six subprojects, including the C&D material studied and the graduate student and the faculty advisor on each subproject.

  2. Building Materials Reclamation Program

    International Nuclear Information System (INIS)

    Weggel, David C.; Chen, Shen-En; Hilger, Helene; Besnard, Fabien; Cavalline, Tara; Tempest, Brett; Alvey, Adam; Grimmer, Madeleine; Turner, Rebecca

    2011-01-01

    This report describes work conducted on the Building Materials Reclamation Program for the period of September 2008 to August 2010. The goals of the project included selecting materials from the local construction and demolition (C and D) waste stream and developing economically viable reprocessing, reuse or recycling schemes to divert them from landfill storage. Educational resources as well as conceptual designs and engineering feasibility demonstrations were provided for various aspects of the work. The project was divided into two distinct phases: Research and Engineering Feasibility and Dissemination. In the Research Phase, a literature review was initiated and data collection commenced, an advisory panel was organized, and research was conducted to evaluate high volume C and D materials for nontraditional use; five materials were selected for more detailed investigations. In the Engineering Feasibility and Dissemination Phase, a conceptual study for a regional (Mecklenburg and surrounding counties) collection and sorting facility was performed, an engineering feasibility project to demonstrate the viability of recycling or reuse schemes was created, the literature review was extended and completed, and pedagogical materials were developed. Over the two-year duration of the project, all of the tasks and subtasks outlined in the original project proposal have been completed. The Final Progress Report, which briefly describes actual project accomplishments versus the tasks/subtasks of the original project proposal, is included in Appendix A of this report. This report describes the scientific/technical aspects (hypotheses, research/testing, and findings) of six subprojects that investigated five common C and D materials. Table 1 summarizes the six subprojects, including the C and D material studied and the graduate student and the faculty advisor on each subproject.

  3. Modeling Non-Linear Material Properties in Composite Materials

    Science.gov (United States)

    2016-06-28

    Technical Report ARWSB-TR-16013 MODELING NON-LINEAR MATERIAL PROPERTIES IN COMPOSITE MATERIALS Michael F. Macri Andrew G...REPORT TYPE Technical 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE MODELING NON-LINEAR MATERIAL PROPERTIES IN COMPOSITE MATERIALS ...systems are increasingly incorporating composite materials into their design. Many of these systems subject the composites to environmental conditions

  4. Distilling solid carbonaceous materials

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, H; Laing, B

    1926-12-04

    In a process of distilling solid carbonaceous materials with by-product recovery, the time factor and the temperature gradient during the distillation period are so controlled that a temperature difference exceeding 150/sup 0/C is avoided between the temperatures at the center and periphery of any suitable size of material or thickness of fuel bed. The material is heated by direct contact with an inert gas, such as water gas, producer gas, or combustion gases, which is passed in counterflow to the material and whose volume is such as to lower the vapor tension or partial pressure of the volatilizable oils and to withdraw the oils without cracking of the oil vapors. The material may be subjected to a preliminary heat treatment by gases containing 2 to 3 percent of free oxygen to reduce its coking properties, and free oxygen may be added either to the heating gases during the heat treatment, or to the retort and heating gases and vapors to polymerize resinous bodies prior to condensation or during condensation and while the oils are still wholly or partially in the vapor state.

  5. Neutron shielding material

    International Nuclear Information System (INIS)

    Nodaka, M.; Iida, T.; Taniuchi, H.; Yosimura, K.; Nagahama, H.

    1993-01-01

    From among the neutron shielding materials of the 'kobesh' series developed by Kobe Steel, Ltd. for transport and storage packagings, silicon rubber base type material has been tested for several items with a view to practical application and official authorization, and in order to determine its adaptability to actual vessels. Silicon rubber base type 'kobesh SR-T01' is a material in which, from among the silicone rubber based neutron shielding materials, the hydrogen content is highest and the boron content is most optimized. Its neutron shielding capability has been already described in the previous report (Taniuchi, 1986). The following tests were carried out to determine suitability for practical application; 1) Long-term thermal stability test 2) Pouring test on an actual-scale model 3) Fire test The experimental results showed that the silicone rubber based neutron shielding material has good neutron shielding capability and high long-term fire resistance, and that it can be applied to the advanced transport packaging. (author)

  6. Thermodynamics of nuclear materials

    International Nuclear Information System (INIS)

    1962-01-01

    The first session of the symposium discussed in general the thermodynamic properties of actinides, including thorium, uranium and Plutonium which provide reactor fuel. The second session was devoted to applications of thermodynamic theory to the study of nuclear materials, while the experimental techniques for the determination of thermodynamic data were examined at the next session. The thermodynamic properties of alloys were considered at a separate session, and another session was concerned with solids other than alloys. Vaporization processes, which are of special interest in the development of high-temperature reactors, were discussed at a separate session. The discussions on the methods of developing the data and ascertaining their accuracy were especially useful in highlighting the importance of determining whether any given data are reliable before they can be put to practical application. Many alloys and refractory materials (i. e. materials which evaporate only at very high temperatures) are of great importance in nuclear technology, and some of these substances are extremely complex in their chemical composition. For example, until recently the phase composition of the oxides of thorium, uranium and plutonium had been only very imperfectly understood, and the same was true of the carbides of these elements. Recent developments in experimental techniques have made it possible to investigate the phase composition of these complex materials as well as the chemical species of these materials in the gaseous phase. Recent developments in measuring techniques, such as fluorine bomb calorimetry and Knudsen effusion technique, have greatly increased the accuracy of thermodynamic data

  7. Materials Science Programs

    International Nuclear Information System (INIS)

    1990-03-01

    The Division of Materials Sciences is located within the Department of Energy in the Office of Basic Energy Sciences. The Office of Basic Energy Sciences reports to the Director of the Office of Energy Research. The Director of this office is appointed by the President with Senate consent. The Director advises the Secretary on the physical research program; monitors the Department's R ampersand D programs; advises the Secretary on management of the laboratories under the jurisdiction of the Department, excluding those that constitute part of the nuclear weapon complex; and advises the Secretary on basic and applied research activities of the Department. The research covers a spectrum of scientific and engineering areas of interest to the Department of Energy and is conducted generally by personnel trained in the disciplines of Solid State Physics, Metallurgy, Ceramics, Chemistry, Polymers and Materials Science. The Materials Sciences Division supports basic research on materials properties and phenomena important to all energy systems. The aim is to provide the necessary base of materials knowledge required to advance the nation's energy programs. This report contains a listing of research underway in FY 1989 together with a convenient index to the Division's programs

  8. Alternative geochemical barrier materials

    International Nuclear Information System (INIS)

    1991-07-01

    Previous investigations of the effects of neutralization and reduction on uranium mill tailings pore fluids by the Technical Support Contractor indicated that arsenic, selenium, and molybdenum continue to remain in solution in all but reducing conditions. These hazardous constituents are present in groundwaters as oxyanions and, therefore, are not expected to be removed by adsorption into clays and most other soil constituents. It was decided to investigate the attenuation capacity of two commonly available crystalline iron oxides, taconite and scoria, and a zeolite, a network aluminosilicate with a cage structure. Columns of the candidate materials were exposed to solutions of individual constituents, including arsenic, molybdenum, selenium, and, uranium, and to the spiked tailings pore fluid from the Bodo Canyon disposal cell near Durango, Colorado. In addition to the single material columns, a homogeneous blend of the three materials and layers of the materials were exposed to spiked tailings pore fluids. The results of these experiments indicate that with the exception of molybdenum, the constituents of concern are attenuated by the taconite; however, they are not sufficiently attenuated to meet the groundwater protection standards applicable to the UMTRA Project. Therefore, the candidate barrier materials did not prove to be useful to the UMTRA Project for the cleanup of groundwaters

  9. EDITORIAL: Electroactive polymer materials

    Science.gov (United States)

    Bar-Cohen, Yoseph; Kim, Kwang J.; Ryeol Choi, Hyouk; Madden, John D. W.

    2007-04-01

    Imitating nature's mechanisms offers enormous potential for the improvement of our lives and the tools we use. This field of the study and imitation of, and inspiration from, nature's methods, designs and processes is known as biomimetics. Artificial muscles, i.e. electroactive polymers (EAPs), are one of the emerging technologies enabling biomimetics. Polymers that can be stimulated to change shape or size have been known for many years. The activation mechanisms of such polymers include electrical, chemical, pneumatic, optical and magnetic. Electrical excitation is one of the most attractive stimulators able to produce elastic deformation in polymers. The convenience and practicality of electrical stimulation and the continual improvement in capabilities make EAP materials some of the most attractive among activatable polymers (Bar-Cohen Y (ed) 2004 Electroactive Polymer (EAP) Actuators as Artificial Muscles—Reality, Potential and Challenges 2nd edn, vol PM136 (Bellingham, WA: SPIE Press) pp 1-765). As polymers, EAP materials offer many appealing characteristics that include low weight, fracture tolerance and pliability. Furthermore, they can be configured into almost any conceivable shape and their properties can be tailored to suit a broad range of requirements. These capabilities and the significant change of shape or size under electrical stimulation while being able to endure many cycles of actuation are inspiring many potential possibilities for EAP materials among engineers and scientists in many different disciplines. Practitioners in biomimetics are particularly excited about these materials since they can be used to mimic the movements of animals and insects. Potentially, mechanisms actuated by EAPs will enable engineers to create devices previously imaginable only in science fiction. For many years EAP materials received relatively little attention due to their poor actuation capability and the small number of available materials. In the last fifteen

  10. Applied bioactive polymeric materials

    CERN Document Server

    Carraher, Charles; Foster, Van

    1988-01-01

    The biological and biomedical applications of polymeric materials have increased greatly in the past few years. This book will detail some, but not all, of these recent developments. There would not be enough space in this book to cover, even lightly, all of the major advances that have occurred. Some earlier books and summaries are available by two of this book's Editors (Gebelein & Carraher) and these should be consul ted for additional information. The books are: "Bioactive Polymeric Systems" (Plenum, 1985); "Polymeric Materials In Medication" (Plenum, 1985); "Biological Acti vi ties of Polymers" (American Chemical Society, 1982). Of these three, "Bioacti ve Polymeric Systems" should be the most useful to a person who is new to this field because it only contains review articles written at an introductory level. The present book primarily consists of recent research results and applications, with only a few review or summary articles. Bioactive polymeric materials have existed from the creation of life...

  11. Fire Resistant Materials

    Science.gov (United States)

    1982-01-01

    Fire hazard is greater in atmospheres containing a high percentage of oxygen under pressure. NASA intensified its fire safety research after a 1967 Apollo fire. A chemically treated fabric called Durette developed by Monsanto Company, which will not burn or produce noxious fumes, was selected as a material for Apollo astronaut garments. Monsanto sold production rights for this material to Fire Safe Products (FSP). Durette is now used for a wide range of applications such as: sheets, attendants' uniforms in hyperbaric chambers; crew's clothing, furniture and interior walls of diving chambers operated by the U.S. Navy and other oceanographic companies and research organizations. Pyrotect Safety Equipment, Minneapolis, MN produces Durette suits for auto racers, refuelers and crew chiefs from material supplied by FSP. FSP also manufactures Durette bags for filtering gases and dust from boilers, electric generators and similar systems. Durette bags are an alternative to other felted fiber capable of operating at high temperature that cost twice as much.

  12. Macrocyclic fragrance materials

    DEFF Research Database (Denmark)

    Salvito, Daniel; Lapczynski, Aurelia; Sachse-Vasquez, Christen

    2011-01-01

    A screening-level aquatic environmental risk assessment for macrocyclic fragrance materials using a “group approach” is presented using data for 30 macrocyclic fragrance ingredients. In this group approach, conservative estimates of environmental exposure and ecotoxicological effects thresholds....../L and for macrocyclic lactones/lactides is 2.7 μg/L. The results of this screening-level aquatic ecological risk assessment indicate that at their current tonnage, often referred to as volumes of use, macrocyclic fragrance materials in Europe and North America, pose a negligible risk to aquatic biota; with no PEC...... for compounds within two subgroups (15 macrocyclic ketones and 15 macrocyclic lactones/lactides) were used to estimate the aquatic ecological risk potential for these subgroups. It is reasonable to separate these fragrance materials into the two subgroups based on the likely metabolic pathway required...

  13. Nuclear material accounting handbook

    International Nuclear Information System (INIS)

    2008-01-01

    The handbook documents existing best practices and methods used to account for nuclear material and to prepare the required nuclear material accounting reports for submission to the IAEA. It provides a description of the processes and steps necessary for the establishment, implementation and maintenance of nuclear material accounting and control at the material balance area, facility and State levels, and defines the relevant terms. This handbook serves the needs of State personnel at various levels, including State authorities, facility operators and participants in training programmes. It can assist in developing and maintaining accounting systems which will support a State's ability to account for its nuclear material such that the IAEA can verify State declarations, and at the same time support the State's ability to ensure its nuclear security. In addition, the handbook is useful for IAEA staff, who is closely involved with nuclear material accounting. The handbook includes the steps and procedures a State needs to set up and maintain to provide assurance that it can account for its nuclear material and submit the prescribed nuclear material accounting reports defined in Section 1 and described in Sections 3 and 4 in terms of the relevant agreement(s), thereby enabling the IAEA to discharge its verification function as defined in Section 1 and described in Sections 3 and 4. The contents of the handbook are based on the model safeguards agreement and, where applicable, there will also be reference to the model additional protocol. As a State using The handbook consists of five sections. In Section 1, definitions or descriptions of terms used are provided in relation to where the IAEA applies safeguards or, for that matter, accounting for and control of nuclear material in a State. The IAEA's approach in applying safeguards in a State is also defined and briefly described, with special emphasis on verification. In Section 2, the obligations of the State

  14. Optimized nanoporous materials.

    Energy Technology Data Exchange (ETDEWEB)

    Braun, Paul V. (University of Illinois at Urbana-Champaign, Urbana, IL); Langham, Mary Elizabeth; Jacobs, Benjamin W.; Ong, Markus D.; Narayan, Roger J. (North Carolina State University, Raleigh, NC); Pierson, Bonnie E. (North Carolina State University, Raleigh, NC); Gittard, Shaun D. (North Carolina State University, Raleigh, NC); Robinson, David B.; Ham, Sung-Kyoung (Korea Basic Science Institute, Gangneung, South Korea); Chae, Weon-Sik (Korea Basic Science Institute, Gangneung, South Korea); Gough, Dara V. (University of Illinois at Urbana-Champaign, Urbana, IL); Wu, Chung-An Max; Ha, Cindy M.; Tran, Kim L.

    2009-09-01

    Nanoporous materials have maximum practical surface areas for electrical charge storage; every point in an electrode is within a few atoms of an interface at which charge can be stored. Metal-electrolyte interfaces make best use of surface area in porous materials. However, ion transport through long, narrow pores is slow. We seek to understand and optimize the tradeoff between capacity and transport. Modeling and measurements of nanoporous gold electrodes has allowed us to determine design principles, including the fact that these materials can deplete salt from the electrolyte, increasing resistance. We have developed fabrication techniques to demonstrate architectures inspired by these principles that may overcome identified obstacles. A key concept is that electrodes should be as close together as possible; this is likely to involve an interpenetrating pore structure. However, this may prove extremely challenging to fabricate at the finest scales; a hierarchically porous structure can be a worthy compromise.

  15. Heat-resistant materials

    CERN Document Server

    1997-01-01

    This handbook covers the complete spectrum of technology dealing with heat-resistant materials, including high-temperature characteristics, effects of processing and microstructure on high-temperature properties, materials selection guidelines for industrial applications, and life-assessment methods. Also included is information on comparative properties that allows the ranking of alloy performance, effects of processing and microstructure on high-temperature properties, high-temperature oxidation and corrosion-resistant coatings for superalloys, and design guidelines for applications involving creep and/or oxidation. Contents: General introduction (high-temperature materials characteristics, and mechanical and corrosion properties, and industrial applications); Properties of Ferrous Heat-Resistant Alloys (carbon, alloy, and stainless steels; alloy cast irons; and high alloy cast steels); Properties of superalloys (metallurgy and processing, mechanical and corrosion properties, degradation, and protective coa...

  16. Inflammable materials stores

    International Nuclear Information System (INIS)

    Nandagopan, V.

    2017-01-01

    A new Inflammable Materials Stores has been constructed by A and SED, BARC near Gamma Field for storage of inflammable materials falling into Petroleum Class ‘A’ ‘B’ and “C” mainly comprising of oils and lubricants, Chemicals like Acetone, Petroleum Ether etc. which are regularly procured by Central Stores Unit (CSU) for issue to the various divisions of BARC. The design of the shed done by A and SED, BARC was duly got approved from Petroleum and Explosive Safety Organization (PESO) which is a mandatory requirement before commencement of the construction. The design had taken into account various safety factors which is ideally required for an inflammable materials stores

  17. Radiation shielding material

    International Nuclear Information System (INIS)

    Matsumoto, Akio; Isobe, Eiji.

    1976-01-01

    Purpose: To increase the shielding capacity of the radiation shielding material having an abundant flexibility. Constitution: A mat consisting of a lead or lead alloy fibrous material is covered with a cloth, and the two are made integral by sewing in a kilted fashion by using a yarn. Thereafter, the system is covered with a gas-tight film or sheet. The shielding material obtained in this way has, in addition to the above merits, advantages in that (1) it is free from restoration due to elasticity so that it can readily seal contaminants, (2) it can be used in a state consisting of a number of overlapped layers, (3) it fits the shoulder well and is readily portable and (4) it permits attachment of fasteners or the like. (Ikeda, J.)

  18. Nanoscale Ionic Materials

    KAUST Repository

    Rodriguez, Robert; Herrera, Rafael; Archer, Lynden A.; Giannelis, Emmanuel P.

    2008-01-01

    Polymer nanocomposites (nanoparticles dispersed in a polymer matrix) have been the subject of intense research for almost two decades in both academic and industrial settings. This interest has been fueled by the ability of nanocomposites to not only improve the performance of polymers, but also by their ability to introduce new properties. Yet, there are still challenges that polymer nanocomposites must overcome to reach their full potential. In this Research News article we discuss a new class of hybrids termed nanoparticle ionic materials (NIMS). NIMS are organic-inorganic hybrid materials comprising a nanoparticle core functionalized with a covalently tethered ionic corona. They are facilely engineered to display flow properties that span the range from glassy solids to free flowing liquids. These new systems have unique properties that can overcome some of the challenges facing nanocomosite materials. © 2008 WILEY-VCH Verlag GmbH & Co. KGaA.

  19. Material and Virtuality

    DEFF Research Database (Denmark)

    Kruse Aagaard, Anders

    2015-01-01

    Through tangible experiments this paper discusses the dialogues between digital architectural drawing and the process of materialisation. The paper sets op the spans between virtual and actual and control and uncertainty making these oppositions a combined spaces where information between a digital...... world and a physical world can interchange. The paper suggest an approach where an overlapping of virtuality and the tangible material output from digital fabrication machines create a method of using materialisation tools as instruments to connect the reality of materials and to an exploring process...... through these experiments is both tangible and directly connected to real actions in digital drawing or material processing but also the base for theoretical contemplations of the relation between virtual and actual and control and uncertainty....

  20. Micromechanics of Composite Materials

    CERN Document Server

    Dvorak, George

    2013-01-01

    This book presents a broad exposition of analytical and numerical methods for modeling composite materials, laminates, polycrystals and other heterogeneous solids, with emphasis on connections between material properties and responses on several length scales, ranging from the nano and microscales to the macroscale. Many new results and methods developed by the author are incorporated into a rich fabric of the subject, which has been explored by several researchers over the last 40 years.   The first  part of the book reviews anisotropic elasticity theory, and then it describes the frequently used procedures and theorems for bounding and estimating overall properties, local fields and energy changes in elastic inhomogeneities, heterogeneous media, fiber composites and functionally graded materials.  Those are caused by mechanical loads and by phase eigenstrains, such as thermal, transformation and inelastic strains, and also by cavities and cracks.    Worked examples show that the eigendeformations may...

  1. Insulating materials for optoelectronics

    International Nuclear Information System (INIS)

    Agullo-Lopez, F.

    1990-01-01

    Optoelectronics is an interdisciplinary field. Basic functions of an optoelectronic system include the generator of the optical signal, its transmission and handling and, finally, its detection, storage and display. A large variety of semiconductor and insulating materials are used or are being considered to perform those functions. The authors focus on insulating materials, mostly oxides. For signal generation, tunable solid state lasers, either vibronic or those based oon colour centres are briefly described, and their main operating parameters summarized. Reference is made to some developments on fiber and waveguide lasers. Relevant physical features of the silica fibres used for low-loss, long-band, optical transmission are reviewed, as well as present efforts to further reduce attenuation in the mid-infrared range. Particular attention is paid to photorefractive materials (LiNbO 3 , BGO, BSO, etc.), which are being investigated

  2. Diffusion in reactor materials

    International Nuclear Information System (INIS)

    Fedorov, G.B.; Smirnov, E.A.

    1984-01-01

    The monograph contains a brief description of the principles underlying the theory of diffusion, as well as modern methods of studying diffusion. Data on self-diffusion and diffusion of impurities in a nuclear fuel and fissionable materials (uranium, plutonium, thorium, zirconium, titanium, hafnium, niobium, molybdenum, tungsten, beryllium, etc.) is presented. Anomalous diffusion, diffusion of components, and interdiffusion in binary and ternary alloys were examined. The monograph presents the most recent reference material on diffusion. It is intended for a wide range of researchers working in the field of diffusion in metals and alloys and attempting to discover new materials for application in nuclear engineering. It will also be useful for teachers, research scholars and students of physical metallurgy

  3. A new material practice

    DEFF Research Database (Denmark)

    Tamke, Martin; Nicholas, Paul; Ramsgaard Thomsen, Mette

    2012-01-01

    The first generation of digital architecture was fascinated with the extension of digital possibilities into the physical world. Today, we are seeing the emergence of a new material practice. This practice is focusing on a design and production process that is seeking an understanding of the aggr......The first generation of digital architecture was fascinated with the extension of digital possibilities into the physical world. Today, we are seeing the emergence of a new material practice. This practice is focusing on a design and production process that is seeking an understanding...... of the aggregated behavior of matter in an environment. Advances in material science and in computational tools are creating new opportunities within architectural design. However, these approaches are challenging the current practices of design and representation....

  4. Building materials. Stichwort Baustoff

    Energy Technology Data Exchange (ETDEWEB)

    Rohwer, W

    1981-01-01

    To handle building materials properly, one must know about their characteristics. This pocket book will be of help: structured like a glossary, it gives brief descriptions of the most common building materials. It is small and handy enough to be a constant companion to resident engineers, foremen, gangers, building tradesmen, and construction workers and an aid in their training. The following groups of building materials are discussed: Natural stone; units for brick walls, floors, and roofs; mortar and concrete (definitions, binders, aggregates, additives, admixtures, mixing water); special types of plaster and rendering; light-weight building boards and wood wool basis; multilayer light-weight building boards; gypsum plasterboards; chimney construction; sewers; thermal insulation and sound section; structural steels; plastics.

  5. Materials and test methods

    International Nuclear Information System (INIS)

    Kasen, M.B.

    1984-01-01

    The industrial specification for production of the G-10CR grade of cryogenic high-pressure laminate has been revised and accepted by US manufacturers. The objective was to make the specification as generic as possible without adversely affecting performance and to add a material performance criteria to the specification. G-10CR and G-11CR products have been produced by five US industrial laminating forms. No significant differences in cryogenic mechanical properties were found among G-10CR material produced by these manufacturers. This indicates that the specifications are fulfilling their intended purpose. An efficient system for producing research materials for systematic screening of the parameters influencing cryogenic radiation resistance was devised. Laboratories in Japan and England have agreed to actively cooperate with NBS in further development of this system

  6. Porous material neutron detector

    Science.gov (United States)

    Diawara, Yacouba [Oak Ridge, TN; Kocsis, Menyhert [Venon, FR

    2012-04-10

    A neutron detector employs a porous material layer including pores between nanoparticles. The composition of the nanoparticles is selected to cause emission of electrons upon detection of a neutron. The nanoparticles have a maximum dimension that is in the range from 0.1 micron to 1 millimeter, and can be sintered with pores thereamongst. A passing radiation generates electrons at one or more nanoparticles, some of which are scattered into a pore and directed toward a direction opposite to the applied electrical field. These electrons travel through the pore and collide with additional nanoparticles, which generate more electrons. The electrons are amplified in a cascade reaction that occurs along the pores behind the initial detection point. An electron amplification device may be placed behind the porous material layer to further amplify the electrons exiting the porous material layer.

  7. Organic optoelectronic materials

    CERN Document Server

    Li, Yongfang

    2015-01-01

    This volume reviews the latest trends in organic optoelectronic materials. Each comprehensive chapter allows graduate students and newcomers to the field to grasp the basics, whilst also ensuring that they have the most up-to-date overview of the latest research. Topics include: organic conductors and semiconductors; conducting polymers and conjugated polymer semiconductors, as well as their applications in organic field-effect-transistors; organic light-emitting diodes; and organic photovoltaics and transparent conducting electrodes. The molecular structures, synthesis methods, physicochemical and optoelectronic properties of the organic optoelectronic materials are also introduced and described in detail. The authors also elucidate the structures and working mechanisms of organic optoelectronic devices and outline fundamental scientific problems and future research directions. This volume is invaluable to all those interested in organic optoelectronic materials.

  8. Edible packaging materials.

    Science.gov (United States)

    Janjarasskul, Theeranun; Krochta, John M

    2010-01-01

    Research groups and the food and pharmaceutical industries recognize edible packaging as a useful alternative or addition to conventional packaging to reduce waste and to create novel applications for improving product stability, quality, safety, variety, and convenience for consumers. Recent studies have explored the ability of biopolymer-based food packaging materials to carry and control-release active compounds. As diverse edible packaging materials derived from various by-products or waste from food industry are being developed, the dry thermoplastic process is advancing rapidly as a feasible commercial edible packaging manufacturing process. The employment of nanocomposite concepts to edible packaging materials promises to improve barrier and mechanical properties and facilitate effective incorporation of bioactive ingredients and other designed functions. In addition to the need for a more fundamental understanding to enable design to desired specifications, edible packaging has to overcome challenges such as regulatory requirements, consumer acceptance, and scaling-up research concepts to commercial applications.

  9. Photoactive energetic materials

    Science.gov (United States)

    Chavez, David E.; Hanson, Susan Kloek; Scharff, Robert Jason; Veauthier, Jacqueline Marie; Myers, Thomas Winfield

    2018-02-27

    Energetic materials that are photoactive or believed to be photoactive may include a conventional explosive (e.g. PETN, nitroglycerine) derivatized with an energetic UV-absorbing and/or VIS-absorbing chromophore such as 1,2,4,5-tetrazine or 1,3,5-triazine. Absorption of laser light having a suitably chosen wavelength may result in photodissociation, decomposition, and explosive release of energy. These materials may be used as ligands to form complexes. Coordination compounds include such complexes with counterions. Some having the formula M(L).sub.n.sup.2+ were synthesized, wherein M is a transition metal and L is a ligand and n is 2 or 3. These may be photoactive upon exposure to a laser light beam having an appropriate wavelength of UV light, near-IR and/or visible light. Photoactive materials also include coordination compounds bearing non-energetic ligands; in this case, the counterion may be an oxidant such as perchlorate.

  10. Nanoscale Ionic Materials

    KAUST Repository

    Rodriguez, Robert

    2008-11-18

    Polymer nanocomposites (nanoparticles dispersed in a polymer matrix) have been the subject of intense research for almost two decades in both academic and industrial settings. This interest has been fueled by the ability of nanocomposites to not only improve the performance of polymers, but also by their ability to introduce new properties. Yet, there are still challenges that polymer nanocomposites must overcome to reach their full potential. In this Research News article we discuss a new class of hybrids termed nanoparticle ionic materials (NIMS). NIMS are organic-inorganic hybrid materials comprising a nanoparticle core functionalized with a covalently tethered ionic corona. They are facilely engineered to display flow properties that span the range from glassy solids to free flowing liquids. These new systems have unique properties that can overcome some of the challenges facing nanocomosite materials. © 2008 WILEY-VCH Verlag GmbH & Co. KGaA.

  11. Annual Report 2007. Nuclear Regulatory Authority; Informe Anual 2007. Autoridad Regulatoria Nuclear

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across tree parts and seven annexes the activities developed by the organism during 2007. The main topic are: the organization and the activity of the ARN; the regulatory standards; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the occupational surveillance; the environmental monitoring; improved organizational. Also, this publication have annexes with the following content: regulatory documents; inspections to medical, industrial and training installations; regulatory guides; measurement and evaluation of the drinking water of Ezeiza.

  12. Annual Report 2008. Nuclear Regulatory Authority; Informe Anual 2008. Autoridad Regulatoria Nuclear

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across four parts and seven annexes the activities developed by the organism during 2008. The main topic are: the organization and the activity of the ARN; the regulatory standards; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the occupational surveillance; the environmental monitoring; improved organizational and budgetary developments. Also, this publication have annexes with the following content: regulatory documents; regulatory guides; measurement and evaluation of the drinking water of Ezeiza.

  13. Annual Research Technical Report 2004; Informe Tecnico de Investigacion Anual del 2004

    Energy Technology Data Exchange (ETDEWEB)

    Alonso V, G.; Viais J, J.; Mendoza G, G.; Ramirez S, J. R.; Castillo M, J. A. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2005-09-15

    In this work it plans to be carried out the Probabilistic Safety Analysis level 1 for the Modified Design of the IRIS Reactor. To generate computational tools of calculation of the analysis of the reactors of IV Generation and to optimize the use of nuclear fuel. To elaborate the economic analysis of the IRIS Reactor. (Author)

  14. Simulación del balance anual en sistemas de pastoreo bovino

    Directory of Open Access Journals (Sweden)

    Verena Torres Cárdenas

    2002-07-01

    Full Text Available Este estudio parte de una abstracción de los sistemas de pastoreo vacuno en Cuba en cuanto a la dinámica del N, P y K, determinando los procesos relevantes para el modelo de simulación. Para  tales procesos se define cómo estimar la cuantía de su contribución como fuente de entrada o salida de los nutrientes por tres posibles métodos: modelos de ajustes, procedimientos descriptivos (fórmulas de cálculos o con valores informados en la literatura. Las componentes del modelo de simulación fueron: estimación del N, P y K aportado por  bostas,  orina,  hojarasca de los árboles,  hojarasca de los pastos, removilización y contenido en la suplementación utilizada.  Estimación del N aportado por la lluvia  y  volatilizado por bostas y orina.  Estimación del N, P y K en la leche producida,  en la ganancia de peso vivo, en los animales que salen del sistema y el  extraído por los pastos. El soporte informático del modelo se programó en Borland Delphi versión 4.0 utilizando el método de Prototipo Orientado a Objeto y el mismo garantiza la rapidez, exactitud y precisión en las estimaciones que se hacen, lo que se comprobó mediante una adecuada estrategia de validación efectuada hasta la introducción del software en la investigación, la docencia y la producción con resultados muy positivos.

  15. Nuevos campos de precipitación media anual para Colombia

    OpenAIRE

    Álvarez Villa, Oscar David; Vélez Upegui, Jaime Ignacio; Poveda Jaramillo, Germán

    2008-01-01

    Se obtiene un campo de intensidad de precipitación promedio para el territorio colombiano mediante el análisis de los datos proporcionados de forma gratuita por la mision TRMM, el cual se ha empleado como información secundaria para la estimación de nuevos campos de precipitación para Colombia. Se comprobo que dicha información secundaria manifiesta muchas de las características físicas del fenómeno de precipitación. Además se mostro que presenta una fuerte correlación con los promedios d...

  16. Annual Research Technical Report 2003; Informe Tecnico de Investigacion Anual del 2003

    Energy Technology Data Exchange (ETDEWEB)

    Alonso V, G.; Viais J, J.; Mendoza G, G.; Ramirez S, J.R.; Castillo M, J.A. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2005-09-15

    This report has among its objectives to carry out the Probabilistic Safety Analysis Level 1 for the IRIS inside the project of development of reactors of IV Generation. To generate computational calculation tools for the analysis of the reactors of IV Generation. To generate computational tools to optimize the use of the nuclear fuel. (Author)

  17. Annual Report 1995. Direccion de Investigacion y Desarrollo; Informe Anual 1995. Direccion de Investigacion y Desarrollo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    In this report, the main results of the projects, studies, services and departmental activities of the Direccion de Investigacion y Desarrollo of the Instituto Nacional de Investigaciones Nucleares (ININ), during 1995, are shown. It includes the results of different areas such as Nuclear Chemistry and Physics, Environmental Science and Genetics, Radiobiology, Nuclear Technology, Nuclear Fuel and Technical Assistance, as well as their main objectives, stage of development and publications. (Author).

  18. Annual Research Technical Report 2002; Informe Tecnico de Investigacion Anual del 2002

    Energy Technology Data Exchange (ETDEWEB)

    Alonso V, G. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2005-09-15

    To study the principles of reactors design of Light Water of IV generation, to look for collaborations to participate in the development of some of them and to generate computational tools that allow us the appropriate analysis of these reactors. (Author)

  19. Grupos económicos y productividad en Colombia, una mirada a la encuesta anual manufacturera

    Directory of Open Access Journals (Sweden)

    María Fernanda Murcia-Sandoval

    2011-06-01

    Full Text Available Este trabajo muestra las diferencias en la productividad entre los establecimientos industriales que pertenecen a empresas de grupos económicos colombianos y los establecimientos de empresas independientes para el periodo 1995-2006. Si bien la productividad es más alta para los establecimientos de grupos que para los individuales, esto se debe a que las empresas de los grupos se encuentran en sectores con mayor productividad y no al efecto de pertenencia a grupo que, de hecho, resulta negativo en un análisis de datos panel. De otro lado, los establecimientos de grupos tienden a invertir más en activos fijos que los independientes.

  20. Think Tanks: en Marcha – la Iniciativa Think Tank Informe Anual ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    24 Nov 2011 ... Rethinking El Salvador's public transit trouble. Riding a public bus in El Salvador can be a treacherous and even deadly experience. View moreRethinking El Salvador's public transit trouble ...

  1. 1997 Annual report. Technological Research Direction; Informe Anual 1997. Direccion de Investigacion Tecnologica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    This document describes the results for one year of work. Here is presented the goals of the Technological Research Direction of the National Institute of Nuclear Research in Mexico, which is promoting and developing the production of high technologies in the nuclear sciences and related disciplines as well as to generate the technologies, products, quality insume for academic organizations, health, industrial and commercial that are required. (Author)

  2. Bernard van Leer Foundation Annual Review 1993 = Fundacion Bernard van Leer Revista Anual 1993.

    Science.gov (United States)

    Bernard Van Leer Foundation, The Hague (Netherlands).

    This report, in both English and Spanish versions, aims to highlight the Bernard van Leer Foundation's identity, objectives, and major activities, as well as the work undertaken by the projects the foundation supports. The review features articles on the Foundation's work on advocacy, supporting families living in disadvantaged circumstances,…

  3. Annual Report 2009. Nuclear Regulatory Authority; Informe Anual 2009. Autoridad Regulatoria Nuclear

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across four parts and seven annexes the activities developed by the organism during 2009. The main topic are: the organization and the activity of the ARN; the regulatory standards; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the environmental monitoring; the occupational surveillance; the training and the public information; improved organizational and budgetary developments. Also, this publication have annexes with the following content: regulatory documents; inspections to medical, industrial and training installations; regulatory guides; measurement and evaluation of the drinking water of Ezeiza.

  4. 1993 Annual Report ININ; Informe Anual 1993 ININ. Direccion de Servicios Tecnologicos

    Energy Technology Data Exchange (ETDEWEB)

    Technological Services Division [Instituto Nacional de Investigaciones Nucleares, Mexico City (Mexico)

    1994-12-31

    The Direction of Technical Services and the Control Unit of Technological Services worked in two complementary directions. One of them to follow the operating programs of the manager`s offices (Managership), taking care of the observance of the scheduled commitments, In the other direction, the general direction through the technical secretary were supported, to accomplish the scheduled requirements in routine reports. Special attention were given to the next aspects: (a) The high quality of the services given to Laguna Verde Nuclear Power Plant. (b) The commercial irradiation services were improved. (c) Resolution to the problems of two important projects: (1) Molybdenum 99 Project. (2) Remodeling of the old facilities of the radioisotopes production plant. In the case of Molybdenum 99 Project, financial adjustment with CONACYT was scheduled, and the works for the design and construction of the basement for Hot Cells, as well as the cells, were started. The works for the basement should be start in September 1994 and in the same date, the International bid for the Hot Cells should be made. In the case of remodeling, a work plan consisting in the design of the future utilities was made. The Hot Cells and the complementary systems as ventilation and extraction will be improved with the addition of the filtering elements necessary for a safe operation. The works will start in 1994 and for this time the old facilities should be dismantled.

  5. 1993 Annual Report ININ; Informe Anual 1993 ININ. Direccion de Investigacion y Desarrollo

    Energy Technology Data Exchange (ETDEWEB)

    Research and Development Division [Instituto Nacional de Investigaciones Nucleares, Mexico City (Mexico)

    1994-12-31

    Six are the working areas included in this division; namely: Basic Research, Applied Research, Nuclear Fuel, Nuclear Systems; Control Projects Unit and Safeguards. Each working area has its own projects and departmental activities. Derived from this activities, arise thesis of the different academic degrees and in several subjects of physics, chemistry and nuclear sciences, as well as technological developments and achievements as the recent manufacture of nuclear fuel assemblies to be tested in Laguna Verde Nuclear Power Plant. For each project and departmental activity, aspects as objectives, advance percentage, personnel staff, activities, publications and presentation in congresses are detailed.

  6. MATERIAL CONTROL ACCOUNTING INMM

    Energy Technology Data Exchange (ETDEWEB)

    Hasty, T.

    2009-06-14

    Since 1996, the Mining and Chemical Combine (MCC - formerly known as K-26), and the United States Department of Energy (DOE) have been cooperating under the cooperative Nuclear Material Protection, Control and Accounting (MPC&A) Program between the Russian Federation and the U.S. Governments. Since MCC continues to operate a reactor for steam and electricity production for the site and city of Zheleznogorsk which results in production of the weapons grade plutonium, one of the goals of the MPC&A program is to support implementation of an expanded comprehensive nuclear material control and accounting (MC&A) program. To date MCC has completed upgrades identified in the initial gap analysis and documented in the site MC&A Plan and is implementing additional upgrades identified during an update to the gap analysis. The scope of these upgrades includes implementation of MCC organization structure relating to MC&A, establishing material balance area structure for special nuclear materials (SNM) storage and bulk processing areas, and material control functions including SNM portal monitors at target locations. Material accounting function upgrades include enhancements in the conduct of physical inventories, limit of error inventory difference procedure enhancements, implementation of basic computerized accounting system for four SNM storage areas, implementation of measurement equipment for improved accountability reporting, and both new and revised site-level MC&A procedures. This paper will discuss the implementation of MC&A upgrades at MCC based on the requirements established in the comprehensive MC&A plan developed by the Mining and Chemical Combine as part of the MPC&A Program.

  7. Materials for nuclear reactors

    International Nuclear Information System (INIS)

    Banerjee, S.; Kamath, H.S.

    2005-01-01

    The improved performance of present generation nuclear reactors and the realization of advanced reactor concepts, both, require development of better materials. Physical metallurgy/materials science principles which have been exploited in meeting the exacting requirements of nuclear reactor materials (fuels and structural materials), are outlined citing a few specific examples. While the incentive for improvement of traditional fuels (e.g., UO 2 fuel) is primarily for increasing the average core burn up, the development of advanced fuels (e.g., MOX, mixed carbide, nitride, silicide and dispersion fuels) are directed towards better utilization of fissile and fertile inventories through adaptation of innovative fuel cycles. As the burn up of UO 2 fuel reaches higher levels, a more detailed and quantitative understanding of the phenomena such as fission gas release, fuel restructuring induced by radiation and thermal gradients and pellet-clad interaction is being achieved. Development of zirconium based alloys for both cladding and pressure tube applications is discussed with reference to their physical metallurgy, fabrication techniques and in-reactor degradation mechanisms. The issue of radiation embrittlement of reactor pressure vessels (RPVs) is covered drawing a comparison between the western and eastern specifications of RPV steels. The search for new materials which can stand higher rates of atomic displacement due to radiation has led to the development of swelling resistant austenitic and ferritic stainless steels for fast reactor applications as exemplified by the development of the D-9 steel for Indian fast breeder reactor. The presentation will conclude by listing various materials related phenomena, which have a strong bearing on the successful development of future nuclear energy systems. (author)

  8. Correlation monitor materials

    International Nuclear Information System (INIS)

    Corwin, W.R.

    1995-01-01

    This task has been established with the explicit purpose of ensuring the continued availability of the pedigreed and extremely well-characterized material now required for inclusion in all additional and future surveillance capsules in commercial light-water reactors. During this reporting period, concrete was poured and pallets storage racks were installed to provide adequate room for the storage of the correlation monitor material being transferred from its location at the Y-12 Plant to its archival storage location at ORNL. The racks came from surplus material storage at ORNL and hence were obtained at no cost to the HSSI Program. Inquiries into cost-effective means of sheltering the blocks of correlation monitor materials from further weather-related deteriorization were initiated. The most likely approach would be to procure a turn-key sheet metal building installed over the storage racks by an outside contractor to minimize costs. Most of the material has now been transferred from Y-12 to the ORNL storage area. It has been repositioned on new storage pallets and placed into the storage racks, An update of the detailed material inventory was initiated to ascertain the revised location of all blocks. Pieces of HSST plate O3 were distributed to participants in the ASTM cross-comparison exercise on subsize specimen testing technology. The use of the HSST O3 will provide for data from the many varieties of tests to be performed to be compared with the standardized data previously developed. The testing techniques will focus on ways to measure transition temperature and fracture toughness

  9. Material characterization models and test methods for historic building materials

    DEFF Research Database (Denmark)

    Hansen, Tessa Kvist; Peuhkuri, Ruut Hannele; Møller, Eva B.

    2017-01-01

    Predictions of long term hygrothermal performance can be assessed by dynamic hygrothermal simulations, in which material parameters are crucial input. Material parameters for especially historic materials are often unknown; therefore, there is a need to determine important parameters, and simple...

  10. Gravitation in material media

    International Nuclear Information System (INIS)

    Ridgely, Charles T

    2011-01-01

    When two gravitating bodies reside in a material medium, Newton's law of universal gravitation must be modified to account for the presence of the medium. A modified expression of Newton's law is known in the literature, but lacks a clear connection with existing gravitational theory. Newton's law in the presence of a homogeneous material medium is herein derived on the basis of classical, Newtonian gravitational theory and by a general relativistic use of Archimedes' principle. It is envisioned that the techniques presented herein will be most useful to graduate students and those undergraduate students having prior experience with vector analysis and potential theory.

  11. Materials for superconducting cavities

    International Nuclear Information System (INIS)

    Bonin, B.

    1996-01-01

    The ideal material for superconducting cavities should exhibit a high critical temperature, a high critical field, and, above all, a low surface resistance. Unfortunately, these requirements can be conflicting and a compromise has to be found. To date, most superconducting cavities for accelerators are made of niobium. The reasons for this choice are discussed. Thin films of other materials such as NbN, Nb 3 Sn, or even YBCO compounds can also be envisaged and are presently investigated in various laboratories. It is shown that their success will depend critically on the crystalline perfection of these films. (author)

  12. Transport of radioactive materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1960-04-15

    The increasing use of radioactive substances, not only in reactor operations but also in medicine, industry and other fields, is making the movement of these materials progressively wider, more frequent and larger in volume. Although regulations for the safe transport of radioactive materials have been in existence for many years, it has now become necessary to modify or supplement the existing provisions on an international basis. It is essential that the regulations should be applied uniformly by all countries. It is also desirable that the basic regulations should be uniform for all modes of transport so as to simplify the procedures to be complied with by shippers and carriers

  13. Lasers in materials processing

    International Nuclear Information System (INIS)

    Davis, J.I.; Rockower, E.B.

    1981-01-01

    A status report on the uranium Laser Isotope Separation (LIS) Program at the Lawrence Livermore National Laboratory is presented. Prior to this status report, process economic analysis is presented so as to understand how the unique properties of laser photons can be best utilized in the production of materials and components despite the high cost of laser energy. The characteristics of potential applications that are necessary for success are identified, and those factors that have up to now frustrated attempts to find commercially viable laser induced chemical and physical process for the production of new or existing materials are pointed out

  14. Heavy fermion materials

    International Nuclear Information System (INIS)

    Smith, J.L.; Cooke, D.W.

    1986-01-01

    The heavy-fermion ground state occurs in a few select metallic compounds as a result of interactions between f-electron and conduction-electron spins. A characteristically large electronic heat capacity at low temperature indicates that the effective electron mass of these materials is more than two orders of magnitude greater than that expected for a free-electron metal. This heavy-fermion ground state can become superconducting or antiferromagnetic, exhibiting very unusual properties. These materials and the role of muon spin rotation in their study are briefly discussed

  15. Adhesive dental materials

    International Nuclear Information System (INIS)

    Unlu, N.

    2005-01-01

    Two main classes of material are involved, the glass-ionomer cements and the composite resins. This investigation describes the way they are bonded to the tooth and highlights their differences. Glass ionomers develop a zone of interaction with the tooth as they age which ultimately gives an extremely strong bond, and results in excellent retention rates. By contrast, bonding of composite resins is more complicated and possibly less effective, though these materials have better wear resistance and better aesthetics than glass ionomers. Assessment of bond durability is difficult. This is because a dental restorative can fail by a number of mechanisms apart from de bonding: for example, through wear or fracture

  16. Losses in Ferroelectric Materials

    Science.gov (United States)

    Liu, Gang; Zhang, Shujun; Jiang, Wenhua; Cao, Wenwu

    2015-01-01

    Ferroelectric materials are the best dielectric and piezoelectric materials known today. Since the discovery of barium titanate in the 1940s, lead zirconate titanate ceramics in the 1950s and relaxor-PT single crystals (such as lead magnesium niobate-lead titanate and lead zinc niobate-lead titanate) in the 1980s and 1990s, perovskite ferroelectric materials have been the dominating piezoelectric materials for electromechanical devices, and are widely used in sensors, actuators and ultrasonic transducers. Energy losses (or energy dissipation) in ferroelectrics are one of the most critical issues for high power devices, such as therapeutic ultrasonic transducers, large displacement actuators, SONAR projectors, and high frequency medical imaging transducers. The losses of ferroelectric materials have three distinct types, i.e., elastic, piezoelectric and dielectric losses. People have been investigating the mechanisms of these losses and are trying hard to control and minimize them so as to reduce performance degradation in electromechanical devices. There are impressive progresses made in the past several decades on this topic, but some confusions still exist. Therefore, a systematic review to define related concepts and clear up confusions is urgently in need. With this objective in mind, we provide here a comprehensive review on the energy losses in ferroelectrics, including related mechanisms, characterization techniques and collections of published data on many ferroelectric materials to provide a useful resource for interested scientists and engineers to design electromechanical devices and to gain a global perspective on the complex physical phenomena involved. More importantly, based on the analysis of available information, we proposed a general theoretical model to describe the inherent relationships among elastic, dielectric, piezoelectric and mechanical losses. For multi-domain ferroelectric single crystals and ceramics, intrinsic and extrinsic energy

  17. Corrosion of reactor materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1963-01-15

    Much operational experience and many experimental results have accumulated in recent years regarding corrosion of reactor materials, particularly since the 1958 Geneva Conference on the Peaceful Uses of Atomic Energy, where these problems were also discussed. It was, felt that a survey and critical appraisal of the results obtained during this period had become necessary and, in response to this need, IAEA organized a Conference on the Corrosion of Reactor Materials at Salzburg, Austria (4-9 June 1962). It covered many of the theoretical, experimental and engineering problems relating to the corrosion phenomena which occur in nuclear reactors as well as in the adjacent circuits

  18. Distilling carbonaceous materials

    Energy Technology Data Exchange (ETDEWEB)

    Trumble, M J

    1925-06-29

    Carbonaceous materials such as coal, oil shale, peat, or wood are destructively distilled while being subjected to the action of superheated steam and hydrogen, the latter being provided by dissociating a part of the superheated steam. The materials are charged into a retort heated by a burner and superheated steam and hydrogen are passed in by a pipe and nozzles. The distillates enter a dust extractor through openings and escape through openings shielded by cones into an outlet pipe leading to condensers. The dust which settles in the bottom of the apparatus is periodically removed.

  19. Radioactive material generator

    International Nuclear Information System (INIS)

    Czaplinski, T.V.; Bolter, B.J.; Heyer, R.E.; Bruno, G.A.

    1975-01-01

    A radioactive material generator includes radioactive material in a column, which column is connected to inlet and outlet conduits, the generator being embedded in a lead casing. The inlet and outlet conduits extend through the casing and are topped by pierceable closure caps. A fitting, containing means to connect an eluent supply and an eluate container, is adapted to pierce the closure caps. The lead casing and the fitting are compatibly contoured such that they will fit only if properly aligned with respect to each other

  20. Automated nuclear materials accounting

    International Nuclear Information System (INIS)

    Pacak, P.; Moravec, J.

    1982-01-01

    An automated state system of accounting for nuclear materials data was established in Czechoslovakia in 1979. A file was compiled of 12 programs in the PL/1 language. The file is divided into four groups according to logical associations, namely programs for data input and checking, programs for handling the basic data file, programs for report outputs in the form of worksheets and magnetic tape records, and programs for book inventory listing, document inventory handling and materials balance listing. A similar automated system of nuclear fuel inventory for a light water reactor was introduced for internal purposes in the Institute of Nuclear Research (UJV). (H.S.)