Türkiye’de Vergi Gelirleri ile Ekonomik Kalkınma Arasındaki İlişki: Frekans Alanı Nedensellik Analizi

Directory of Open Access Journals (Sweden)

Mehmet Vahit EREN

2018-01-01

Full Text Available Çalışmanın amacı, Türkiye’de 1975-2013 dönemine ait yıllık verilerle vergi gelirleri ile kalkınma arasındaki ilişkinin varlığını araştırmakla beraber söz konusu ilişkinin yönünü farklı ekonometrik testlerle analiz etmektir. Hacker ve Hatemi nedensellik testi bulgularına göre, dolaylı vergi gelirlerinden kalkınmaya doğru tek yönlü; Breitung ve Caldelon frekans alanı nedensellik testi ise toplam vergi gelirlerinden kalkınmaya, dolaysız vergi gelirlerinden kalkınmaya ve kalkınmadan dolaylı vergi gelirlerine doğru tek yönlü ilişkiler tespit edilmiştir.

Vision on Scarcity of Transportation. Policy with regard to scarcity of transportation capacity in the electricity grid

International Nuclear Information System (INIS)

Bruin, K.; Fransen, M.; Kranenburg, J.

2009-01-01

The Dutch Competitive Authority NMa established increasing problems that are related to the (possible future) scarcity in transportation capacity in the electricity grid. This vision document aims to inform market parties about the general vision of NMa in relation to the scarcity issue. This document first addresses the problems related to scarcity in transport capacity in the electricity grid. Next policy developments in this area are discussed and NMa's vision is elaborated and explained [nl

Report of a study on the profits of energy companies; Onderzoeksrapport inzake de winsten van energiebedrijven

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-05-02

As an independent supervisor of the energy market the Netherlands Competition Authority (NMa) examined the profits of the four largest regional energy companies in the Netherlands: Eneco, Essent, Nuon and Delta. The primary objective of the study is to determine if the profit from regulated monopolistic activities corresponds to the output that is considered reasonable by the NMa. [mk]. [Dutch] Vanuit haar rol als onafhankelijk toezichthouder op de energiemarkt heeft de NMa onderzoek verricht naar de winsten van de vier grootste regionale energiebedrijven: Eneco, Essent, Nuon en Delta. Het primaire doel van het onderzoek is te bepalen of de winst uit gereguleerde, monopolistische activiteiten overeenkomt met het rendement dat de NMa redelijk acht.

A Bayesian network meta-analysis for binary outcome: how to do it.

Science.gov (United States)

Greco, Teresa; Landoni, Giovanni; Biondi-Zoccai, Giuseppe; D'Ascenzo, Fabrizio; Zangrillo, Alberto

2016-10-01

This study presents an overview of conceptual and practical issues of a network meta-analysis (NMA), particularly focusing on its application to randomised controlled trials with a binary outcome of interest. We start from general considerations on NMA to specifically appraise how to collect study data, structure the analytical network and specify the requirements for different models and parameter interpretations, with the ultimate goal of providing physicians and clinician-investigators a practical tool to understand pros and cons of NMA. Specifically, we outline the key steps, from the literature search to sensitivity analysis, necessary to perform a valid NMA of binomial data, exploiting Markov Chain Monte Carlo approaches. We also apply this analytical approach to a case study on the beneficial effects of volatile agents compared to total intravenous anaesthetics for surgery to further clarify the statistical details of the models, diagnostics and computations. Finally, datasets and models for the freeware WinBUGS package are presented for the anaesthetic agent example. © The Author(s) 2013.

Let's Not Stick Together: Anticipation of Cartel and Merger Control in The Netherlands

NARCIS (Netherlands)

Baarsma, B.; Kemp, R.G.M.; Noll, van der R.; Seldeslachts, J.

2012-01-01

Does enforcement action by the Netherlands Competition Authority (NMa) in the case of cartels and mergers produce an anticipatory effect? We use surveys among firms and their advisers to test whether merger plans that may fail to gain clearance from the NMa are not notified and whether the

The signaling pathway of dopamine D2 receptor (D2R) activation using normal mode analysis (NMA) and the construction of pharmacophore models for D2R ligands.

Science.gov (United States)

Salmas, Ramin Ekhteiari; Stein, Matthias; Yurtsever, Mine; Seeman, Philip; Erol, Ismail; Mestanoglu, Mert; Durdagi, Serdar

2017-07-01

G-protein-coupled receptors (GPCRs) are targets of more than 30% of marketed drugs. Investigation on the GPCRs may shed light on upcoming drug design studies. In the present study, we performed a combination of receptor- and ligand-based analysis targeting the dopamine D2 receptor (D2R). The signaling pathway of D2R activation and the construction of universal pharmacophore models for D2R ligands were also studied. The key amino acids, which contributed to the regular activation of the D2R, were in detail investigated by means of normal mode analysis (NMA). A derived cross-correlation matrix provided us an understanding of the degree of pair residue correlations. Although negative correlations were not observed in the case of the inactive D2R state, a high degree of correlation appeared between the residues in the active state. NMA results showed that the cytoplasmic side of the TM5 plays a significant role in promoting of residue-residue correlations in the active state of D2R. Tracing motions of the amino acids Arg219, Arg220, Val223, Asn224, Lys226, and Ser228 in the position of the TM5 are found to be critical in signal transduction. Complementing the receptor-based modeling, ligand-based modeling was also performed using known D2R ligands. The top-scored pharmacophore models were found as 5-sited (AADPR.671, AADRR.1398, AAPRR.3900, and ADHRR.2864) hypotheses from PHASE modeling from a pool consisting of more than 100 initial candidates. The constructed models using 38 D2R ligands (in the training set) were validated with 15 additional test set compounds. The resulting model correctly predicted the pIC 50 values of an additional test set compounds as true unknowns.

A New Approach to Authoring Interactive Curricular Material

Science.gov (United States)

Christian, Wolfgang

1999-11-01

A persistent problem facing educational software authors is that programming has no top. In other words, the moment a program is finished a potential user will ask for an enhancement or modification to use the program in a new context. Scriptable general-purpose applets, such as Physlets, provide a partial solution since the user can specify the applet's behavior provided that the applet author has anticipated the need. But this is not enough. Curriculum authors usually want to process the data and to present it in various formats. Over the past year the functionality of Physlets has been greatly extended through the use of inter-applet communication. This makes it possible to use a modular object-oriented approach for the design of interactive curricular material. Many Physlets, including Animator, EField, BField, and Faraday, are now capable of generating data in response to an internal clock or in response to user actions. This data can then be passed to a bar graph, a table of numeric values, or an x-y graph using one line of JavaScript to establish the communication link. This technique is very flexible since the code to process and present the data is written in an interpreted runtime environment. Furthermore, web servers can customize the code as the document is being delivered for applications such as testing and online homework. Examples of interactive curricular material that makes use of these techniques will be presented.

Performance evaluation of PRIDE UNDA system with feed material of pyroprocessing

Energy Technology Data Exchange (ETDEWEB)

An, Su Jung; Seo, Hee; Lee, Chae Hun; Ahn, Seong Kyu; Park, Se Hwan; Ku, Jeong Hoe [Nonproliferation System Research Division, KAERI, Daejeon (Korea, Republic of)

2016-12-15

The PRIDE (PyRoprocessing Integrated inactive DEmonstration facility) provides unique opportunities not only to develop process technologies but also to test various types of safeguards equipment for nuclear material accountancy (NMA), containment and surveillance (C/S), as well as process monitoring. In this regard, we developed a UNDA (Unified Non-Destructive Assay) system by incorporating three different non-destructive assay (NDA) techniques, i.e., neutron, gamma-ray, and mass measurements, for the testing of NMA of PRIDE. One of the main advantages of the UNDA is reducing measurement time and systematic error related to sample handling and placement by integrating the NDA techniques. The {sup 235}U mass can be determined from the {sup 238}U mass and uranium enrichment ({sup 235}U/{sup 238}U). The {sup 238}U mass is acquired from total neutron counting using neutron detection module of UNDA, with the information on the spontaneous fission neutron yield of {sup 238}U and neutron detection efficiency of the system. Total sample mass is measured by using the mass balance. In our previous studies, the UNDA was developed and characterized for a calibration source. In this study, the UNDA was installed in PRIDE facility, and the performance of the UNDA was evaluated with feed material of oxide reduction process. In this study, the performance of the UNDA was evaluated with feed material of oxide reduction process: UO2 porous pellets made of DU. The neutron net count rate was obtained as functions of 238U mass. The measured net count rate fitted by linear regression showed good linearity. In addition, the 238U mass of unknown source was determined using the information of the detection efficiency and count rate obtained from the UNDA.

Consultation document Energy Market Concentrations

International Nuclear Information System (INIS)

De Maa, J.; Van Gemert, M.; Karel, A.; La Bastide, G.; Giesbertz, P.; Buijs, F.; Vermeulen, M.; Beusmans, P.

2006-06-01

This the second consultation document of the Netherlands Competition Authority (NMa) on the title subject (the first was in 2002). The purpose of the consultation is to involve all the relevant and interested parties in the development of the energy market in the Netherlands and to consult those parties on studies that have been carried out by the NMa so far: (1) defining (possible) relevant markets in the electricity sector, and (2) the vision and opinion of the NMa with respect to mergers and take-overs. Also, the consultation document is a contribution to the response of the letter from the Dutch Minister of Economic Affairs of May 2005 in which the NMa was requested to give an overview of the preconditions with regard to competition and it's legal aspects [nl

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1994 ed

International Nuclear Information System (INIS)

1994-08-01

This is the fifth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last two complete calendar years. The 1985 Edition of IAEA Safety Series No. 6, the ''Regulations for the Safe Transport of Radioactive Material'' highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1995 edition

International Nuclear Information System (INIS)

1995-09-01

This is the sixth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last complete calendar year. The 1985 Edition of IAEA Safety Series No. 6, the ''Regulations for the Safe Transport of Radioactive Material'' highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1993 ed

International Nuclear Information System (INIS)

1993-10-01

This is the fourth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM, whose memberships consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last two complete calendar years. The 1985 Edition of IAEA Safety Series No. 6, the 'Regulations for the Safe Transport of Radioactive Material'' highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs

Directory of national competent authorities` approval certificates for package design, special form material and shipment of radioactive material. 1995 edition

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

This is the sixth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA`s transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last complete calendar year. The 1985 Edition of IAEA Safety Series No. 6, the ``Regulations for the Safe Transport of Radioactive Material`` highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs.

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1999 Edition

International Nuclear Information System (INIS)

1999-08-01

This is the tenth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Transport Safety Standards Advisory Committee (TRANSSAC), formerly known as the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The reporting format was established at consecutive meetings of SAGSTRAM and endorsed by TRANSSAC, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last complete calendar year. The 1985 Edition of IAEA Safety Series No. 6, the 'Regulations for the Safe Transport of Radioactive Material' highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material

High-authority smart material integrated electric actuator

Science.gov (United States)

Weisensel, G. N.; Pierce, Thomas D.; Zunkel, Gary

1997-05-01

For many current applications, hydraulic power is still the preferred method of gaining mechanical advantage. However, in many of these applications, this power comes with the penalties of high weight, size, cost, and maintenance due to the system's distributed nature and redundancy requirements. A high authority smart material Integrated Electric Actuator (IEA) is a modular, self-contained linear motion device that is capable of producing dynamic output strokes similar to those of hydraulic actuators yet at significantly reduced weight and volume. It provides system simplification and miniaturization. This actuator concept has many innovative features, including a TERFENOL-D-based pump, TERFENOL-D- based active valves, control algorithms, a displacement amplification unit and integrated, unitized packaging. The IEA needs only electrical power and a control command signal as inputs to provide high authority, high response rate actuation. This approach is directly compatible with distributed control strategies. Aircraft control, automotive brakes and fuel injection, and fluid power delivery are just some examples of the IEA's pervasive applications in aerospace, defense and commercial systems.

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2003 ed

International Nuclear Information System (INIS)

2003-10-01

This is the fourteenth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Transport Safety Standards Committee (TRANSSC). It supersedes IAEA-TECDOC-1302 'Directory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 2002 Edition'. Through the database, the Secretariat collects administrative and technical information provided by the issuing competent authority about package approval certificates. Such data are used mainly by national competent authorities and port and customs officials to assist in regulating radioactive material movements in their country, and also by manufacturers and shippers of radioactive material. The database carries information on extant certificates and those that expired within the last complete calendar year. The PACKTRAM database only contains information that has been provided to the IAEA. The data are not complete nor guaranteed to be accurate. If detailed information is required, the original package approval certificates must be consulted. If information is required about package approval certificates that are not contained in the database, the issuing competent authority must be consulted

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2003 ed

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-10-01

This is the fourteenth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Transport Safety Standards Committee (TRANSSC). It supersedes IAEA-TECDOC-1302 'Directory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 2002 Edition'. Through the database, the Secretariat collects administrative and technical information provided by the issuing competent authority about package approval certificates. Such data are used mainly by national competent authorities and port and customs officials to assist in regulating radioactive material movements in their country, and also by manufacturers and shippers of radioactive material. The database carries information on extant certificates and those that expired within the last complete calendar year. The PACKTRAM database only contains information that has been provided to the IAEA. The data are not complete nor guaranteed to be accurate. If detailed information is required, the original package approval certificates must be consulted. If information is required about package approval certificates that are not contained in the database, the issuing competent authority must be consulted.

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1996 edition

International Nuclear Information System (INIS)

1996-09-01

This is the seventh annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificated (PACKTRAM) at the recommendation of the then Standing Advisory Group on the Sate Transport of Radioactive Material (SAGSTRAM). The functions of SAGSTRAM were taken over in 1996 by the Transport Safety Standards Advisory Committee (TRANSSAC). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consists of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who have shown a keen interest in the IAEA's transport safety programme. Through the PACKTRAM database, the Secretariat collects administrative and technical information on package approval certificates to assist national competent authorities in regulating radioactive material movements in their country. The database carries information on extant certificates and those that expired within the last complete calendar year. The 1985 Edition of IAEA Safety Series No. 6, the ''Regulations for the Safe Transport of Radioactive Material'', highlights the role of competent authorities in assuring regulatory compliance in their own countries. Package approval certificates are an important aspect of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2004 ed

International Nuclear Information System (INIS)

2004-10-01

The PACKTRAM database contains administrative and technical information provided annually by the issuing competent authority about package approval certificates. Such data are used mainly by national competent authorities and port and customs officials to assist in regulating radioactive material movements in their country, and also by manufacturers and shippers of radioactive material. The database carries information on extant certificates and those that expired within the last complete calendar year. This is the fifteenth PACKTRAM annual report to being published by the IAEA. It is distributed worldwide mainly to designated competent authorities, as well as to registered interested parties. The database itself is maintained at www.packtram.org and can be accessed by the general public

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1997 Edition

International Nuclear Information System (INIS)

1997-08-01

This is the eighth annual report being published by the Secretariat of the International Atomic Energy Agency since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the then Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM). The functions of SAGSTRAM were taken over in 1996 by the Transport Safety Standards Advisory Committee (TRANSSAC). The reporting format was established at consecutive meetings of SAGSTRAM, whose membership consisted of national competent authorities responsible for the transport of radioactive material from those Member States who have a nuclear industry and others who showed a keen interest in the IAEA's transport safety programme. TRANSSAC underscores the importance of data collecting activities and recommends the continued publication of this annual report. The 1985 Edition of Safety Series No. 6, the ''Regulations for the Safe Transport of Radioactive Material'', highlights the role of competent authorities in assuring regulatory compliance in their own countries. The issuance of package approval certificates is an important aspects of that function. This document aims to be a useful reference for competent authorities as well as for manufacturers and shippers of radioactive material. 6 tabs

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 33. 2002 edition

International Nuclear Information System (INIS)

2002-01-01

The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 32. 2001 edition

International Nuclear Information System (INIS)

2001-01-01

The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 32. 2001 edition

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-01-01

The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 34. 2003 edition

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-01-01

The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 34. 2003 edition

International Nuclear Information System (INIS)

2003-01-01

The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 35. 2004 edition

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-01-01

The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 33. 2002 edition

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-01-01

The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 35. 2004 edition

International Nuclear Information System (INIS)

2004-01-01

The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

Vision document Energy Market Concentrations

International Nuclear Information System (INIS)

De Maa, J.; Van Gemert, M.; Giesbertz, P.; Vermeulen, M.; Beusmans, P.; Te Velthuis, M.; Drahos, M.

2006-11-01

June 2006 the second consultation document of the Netherlands Competition Authority (NMa) on the title subject (the first was in 2002) was published. The purpose of the consultation is to involve all the relevant and interested parties in the development of the energy market in the Netherlands and to consult those parties on studies that have been carried out by the NMa so far: (1) defining (possible) relevant markets in the electricity sector, and (2) the vision and opinion of the NMa with respect to mergers and take-overs. Also, the consultation document is a contribution to the response of the letter from the Dutch Minister of Economic Affairs of May 2005 in which the NMa was requested to give an overview of the preconditions with regard to competition and it's legal aspects. In this vision document all the relevant parties and stakeholders are informed about the development of energy markets in the Netherlands and abroad. Also an overview is given of the reactions from many stakeholders, involved and interested parties. [nl

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no 28. 1997 edition

International Nuclear Information System (INIS)

1997-01-01

To assist Member States in implementing IAEA's Regulations for the Safe Transport of Radioactive Material and carrying out responsibility for compliance assurance, the IAEA maintains an updated list of national competent authorities designated for this purpose

The effect of substituents in the aromatic ring on carcinogenicity of N-nitrosomethylaniline in F344 rats.

Science.gov (United States)

Kroeger-Koepke, M B; Reuber, M D; Iype, P T; Lijinsky, W; Michejda, C J

1983-01-01

N-Nitroso-N-methylaniline (NMA) and N-nitroso-N-methyl-4-fluoroaniline (p-F-NMA), both non-mutagenic in Salmonella typhimurium and N-nitroso-N-methyl-4-nitroaniline (p-NO2-NMA), a potent mutagen, were tested for carcinogenicity in F344 rats. NMA was shown to induce a high level of tumors in the upper gastrointestinal tract, particularly in the esophagus. Male rats treated with NMA died with tumors at a slightly higher rate than females, although the final tumor yield was the same. Most of the rats treated with p-F-NMA also developed tumors of the esophagus, but they died less rapidly than the NMA treated rats, indicating that p-F-NMA is a slightly weaker carcinogen than NMA. The powerful, directly acting mutagen, p-NO2-NMA did not appear to induce tumors at all since its tumor spectrum was essentially identical to that of the untreated control rats. Thus, the carcinogenic activities of NMA and its substituted analogs do not appear to correlate with bacterial mutagenesis assays. Additionally, NMA, p-F-NMA and N-nitroso-N-methyl-4-bromoaniline, the last a strong mutagen in S. typhimurium, were shown not to induce sister chromatid exchanges in CHO cells and in a clone of a CHO:liver cell hybrid which had previously been shown to be sensitive to chemical agents which require metabolic activation.

Chronicle of administrative law enforcement in the energy market. Part 2; Kroniek bestuursrechtelijke handhaving op de energiemarkt. Deel 2

Energy Technology Data Exchange (ETDEWEB)

Van Leeuwen, E.W.T.M. [Juridische Dienst, Nederlandse Mededingingsautoriteit NMa, Den Haag (Netherlands); De Rijke, M. [Bird and Bird LLP, Den Haag (Netherlands)

2013-01-15

In addition to the Netherlands Competition Authority (NMa), the Netherlands Consumer Authority (CA) also regulates the energy market in the area of consumer rights. Both organizations will merge into the Consumer and Market Authority (ACM). This article provides an overview of the powers of the NMA and CA in relation to law enforcement as shaped by the various laws and law amendments. By means of settlement practices and the administration of justice, an overview is given of the main developments in law enforcement. In part 1, attention was paid to the enforcement instruments of both regulators with one instrument examined in more detail: the injunction. Part two addresses the order for penalty payment, the civil penalty and the modification and revocation of licenses and exemptions [Dutch] Naast de Nederlandse Mededingingsautoriteit (NMa) houdt ook de Consumentenautoriteit (CA) toezicht op de energiemarkt, voor zover het de belangen van consumenten betreft. Beide zullen per 1 januari 2013 opgaan in een nieuwe toezichthouder: de Autoriteit Consument en Markt (ACM). In dit artikel wordt een overzicht gegeven van de bevoegdheden NMa en CA met betrekking tot handhaving, zoals die door verschillende wetten en wetswijzigingen vorm hebben gekregen. Verder worden aan de hand van de beschikkingenpraktijk en de rechtspraak de belangrijkste ontwikkelingen en lijnen in de handhaving inzichtelijk gemaakt. In het tweede deel werd aandacht besteed aan het handhavingsinstrumentarium van beide toezichthouders en wordt ingegaan op 1 van de instrumenten: de bindende aanwijzing. In dit tweede deel zullen de last onder dwangsom, de bestuurlijke boete en de wijziging en intrekking van vergunningen en ontheffingen aan de orde komen.

Segregation, civil rights, and health disparities: the legacy of African American physicians and organized medicine, 1910-1968.

Science.gov (United States)

Washington, Harriet A; Baker, Robert B; Olakanmi, Ololade; Savitt, Todd L; Jacobs, Elizabeth A; Hoover, Eddie; Wynia, Matthew K; Blanchard, Janice; Boulware, L Ebony; Braddock, Clarence; Corbie-Smith, Giselle; Crawley, LaVera; LaVeist, Thomas A; Maxey, Randall; Mills, Charles; Moseley, Kathryn L; Williams, David R

2009-06-01

Between 1910 and 1968, the National Medical Association (NMA) repeatedly clashed with the American Medical Association (AMA) over the latter organization's racial bars to membership and other health policy issues. The NMA, founded in 1895 as a nonexclusionary medical society to provide a voice for disenfranchised black physicians and patients, struggled in its early years, during which AMA leadership took scant notice of it. But skirmishes ensued over such actions as stigmatizing racial labels in the AMA's American Medical Directory, which, beginning in 1906, listed all U.S. physicians but designated African Americans with the notation col. The NMA also repeatedly asked the AMA to take action against overt racial bars on blacks' membership in its constituent state and county societies. During the civil rights era, African American physicians received no AMA support in seeking legal remedies to hospital segregation. And the NMA and AMA found themselves opposed on other policy issues, including Medicaid and Medicare. These differences eventually catalyzed a series of direct confrontations. The 1965 AMA meeting in New York City, for example, was protested by about 200 NMA-led picketers. The NMA's quest for racial equality in medicine was supported by some other medical organizations, such as the Medical Committee for Human Rights. In 1966, the AMA House voted to amend the AMA Constitution and Bylaws, giving its Judicial Council (now the Council on Ethical and Judicial Affairs) the authority to investigate allegations of discrimination. This paved the way for a subsequent era of increasing cooperation and understanding.

Chronicle of administrative law enforcement in the energy market. Part 1

International Nuclear Information System (INIS)

Van Leeuwen, E.W.T.M.; De Rijke, M.

2012-01-01

In addition to the Netherlands Competition Authority (NMa), the Netherlands Consumer Authority (CA) also regulates the energy market in the area of consumer rights. Both organizations will merge into the Consumer and Market Authority (ACM). This article provides an overview of the powers of the NMA and CA in relation to law enforcement as shaped by the various laws and law amendments. By means of settlement practices and the administration of justice, an overview is given of the main developments in law enforcement. In this first part, attention is paid to the enforcement instruments of both regulators and one instrument is examined in more detail: the injunction. Part two addresses the order for penalty payment, the civil penalty and the modification and revocation of licenses and exemptions. [nl

Circulation of authorizations - Authority as a material and processuel configuration

DEFF Research Database (Denmark)

Benjaminsen, Nana

Despret's (2004) notion ‘making available' will be used to unfold new propositions and boundaries of authority in the fluid movable landscape of computer enhanced learning. In the second part of the paper, I will advocate that circulations of authorizations occur. When expectations are fulfilled...... the possibility of building objects with Lego bricks in combinations with engines and sensors, and to control their creation through a computer program.   In the example, this paper addresses, children and lego boxes were distributed to different computer workstations in two connected rooms. Electronic devises......, children, half build robots and teachers were more or less constantly moving, and circulating in the two classrooms. I argue that this is challenging what in common practise would be called the teacher's authority. Through the empirical example provided, and in line with the sociomaterial engagement...

Directory of national competent authorities' approval certificates for package design and shipment of radioactive material

International Nuclear Information System (INIS)

1990-04-01

The authorization of packages and shipments of radioactive materials are issued in the form of certificates by the national competent authority of the IAEA Member State in which the package is designed or from which a shipment originates, and may be validated or endorsed by the corresponding authority of other Member States as the need arises. This directory summarizes in tabular form the key information on existing package approval certificates contained in PACKTRAM database. 5 tabs

Directory of national competent authorities' approval certificates for packages, shipments, special arrangements and special form radioactive material

International Nuclear Information System (INIS)

1987-11-01

The Agency's transport regulations prescribe various requirements for the authorization of packages and shipments in respect of both national and international movement of radioactive material. These authorizations are issued by the relevant competent authority of the country concerned; they take the form of package approval and/or shipment approval certificates. At the request of the Standing Advisory Group of the Safe Transport of Radioactive Material (SAGSTRAM), the Agency has established a programme to maintain a file of those certificates for packages and shipments which are either transported internationally or used outside the country of origin. The purpose of this directory is to facilitate the transfer of information to competent authorities and any other person wishing details on the packaging, authorized contents or special conditions pertinent to any package or shipment. The directory enables competent authorities to be aware of the status of any certificate submitted for validation. It also indicates any change in status of any certificate already validated

Detecting un-authorized genetically modified organisms (GMOs) and derived materials.

Science.gov (United States)

Holst-Jensen, Arne; Bertheau, Yves; de Loose, Marc; Grohmann, Lutz; Hamels, Sandrine; Hougs, Lotte; Morisset, Dany; Pecoraro, Sven; Pla, Maria; Van den Bulcke, Marc; Wulff, Doerte

2012-01-01

Genetically modified plants, in the following referred to as genetically modified organisms or GMOs, have been commercially grown for almost two decades. In 2010 approximately 10% of the total global crop acreage was planted with GMOs (James, 2011). More than 30 countries have been growing commercial GMOs, and many more have performed field trials. Although the majority of commercial GMOs both in terms of acreage and specific events belong to the four species: soybean, maize, cotton and rapeseed, there are another 20+ species where GMOs are commercialized or in the pipeline for commercialization. The number of GMOs cultivated in field trials or for commercial production has constantly increased during this time period. So have the number of species, the number of countries involved, the diversity of novel (added) genetic elements and the global trade. All of these factors contribute to the increasing complexity of detecting and correctly identifying GMO derived material. Many jurisdictions, including the European Union (EU), legally distinguish between authorized (and therefore legal) and un-authorized (and therefore illegal) GMOs. Information about the developments, field trials, authorizations, cultivation, trade and observations made in the official GMO control laboratories in different countries around the world is often limited, despite several attempts such as the OECD BioTrack for voluntary dissemination of data. This lack of information inevitably makes it challenging to detect and identify GMOs, especially the un-authorized GMOs. The present paper reviews the state of the art technologies and approaches in light of coverage, practicability, sensitivity and limitations. Emphasis is put on exemplifying practical detection of un-authorized GMOs. Although this paper has a European (EU) bias when examples are given, the contents have global relevance. Copyright © 2012 Elsevier Inc. All rights reserved.

27 CFR 24.242 - Authority to use greater quantities of decolorizing material in juice or wine.

Science.gov (United States)

2010-04-01

... quantities of decolorizing material in juice or wine. 24.242 Section 24.242 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Storage, Treatment and Finishing of Wine § 24.242 Authority to use greater quantities of decolorizing material in...

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1992 ed

International Nuclear Information System (INIS)

1992-08-01

Being in a unique position to facilitate information exchange, the Secretariat of the International Atomic Energy Agency was requested by its Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM) to collate package approval data and publish periodical reports thereon. A database was implemented on the mainframe computer in the mid-1980s but this was soon adapted for use on a personal computer. A fully menu-driven system programme was designed that allows both contributing Member States and the Secretariat more flexibility in data processing and reporting. Complete documentation is available in the form of a user guide. The cut-off date used for this report is 31 August 1992. This report supersedes IAEA-TECDOC-617 ''Directory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 1991 Edition''. The information contained in this report is given in six tables. In each of these, information is presented in alphabetical order based on the certificate number. The certificate number is identical with the competent authority identification mark. It is composed of the issuing Member State's international vehicle registration identification (VRI) code, followed by a slash, then a unique number specific to a particular design or shipment that is assigned by the competent authority, another slash and finally a code identifying the type of package involved. ''-85'' is appended to those certificates that were approved on the basis of the 1985 Edition of Safety Series No. 6. Tables 1 to 4 present administrative data including issue and expiry dates, package identification, package serial numbers, modes for which the package/shipment is approved and the edition of Safety Series No. 6 on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table 5. Table 6

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1991 edition

International Nuclear Information System (INIS)

1991-08-01

The format of this report is a result of recommendations made by the Standing Advisory Group on the Safe Transport of Radioactive Material (SAGSTRAM) at its 6th meeting in November 1987. The database was at that time maintained on the main frame and it was felt that adapting it for use on a personal computer would allow more flexibility in data processing and reporting. This document supersedes TECDOC-552 ''Directory of National Competent Authorities' Approval Certificates for Package Design and Shipment of Radioactive Material 1990 Edition''. Since publication of TECDOC-552, some modifications affecting the structure of the database and reporting formats were undertaken. These are fully described in ''Working Material: The PACKTRAM Database National Competent Authority Package Approval Certificates, User Guide Rev. 1'', which was released in early 1991. The present report is contained in five tables. In each of these, information is presented in alphabetical order based on the certificate number. This is composed of the issuing Member State's VRI code, followed by a slash, then a three- or four-digit number, another slash and finally a code identifying the type of package involved. ''-85'' is appended to those certificates that were approved on the basis of the 1985 Edition of Safety Series No. 6. Tables 1 to 4 present administrative data including issue and expire, dates, package identification, package serial numbers, modes for which the package/shipment is approved and the edition of Safety Series No. 6 on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table. 5

Factors affecting geographic market definition and merger control for the Dutch electricity sector. Final report. Non-confidential version

International Nuclear Information System (INIS)

Moselle, B.; Newbery, D.; Harris, D.

2006-06-01

The NMA (Netherlands Competition Authority NMa) asked The Brattle Group to analyse: (1) Factors that would affect geographic market definition for the purpose of merger control in the Dutch electric power industry; and (2) The competitive effects of some specific (hypothetical) mergers in that industry. This study does not refer to any actual merger proceedings, and the NMa have not asked to analyse any mergers of which they have been notified. All mergers analysed are hypothetical. This study is performed using both statistical analysis of historical data, and results from a comprehensive model of the European power market, the Brattle Annual Model (BAM). Standard tools of competitive analysis are used, including the so-called SSNIP test (Small but Significant and Non-transitory Increase in Price) for geographic market definition, and measures of concentration (market shares, Hirschmann-Herfindahl Indices (HHIs), which are used to examine horizontal issues in competitive analysis, and Pivotal Supply Index) for merger analysis, as well as more sophisticated economic modelling (e.g., Cournot model)

Directory of national competent authorities' approval certificates for packages, shipments, special arrangements and special form radioactive material

International Nuclear Information System (INIS)

1986-09-01

The Agency's transport regulations prescribe various requirements for the authorization of packages and shipments in respect of both national and international movement of radioactive materials. These authorizations are issued by the relevant competent authority of the country concerned; they take the form of package approval and/or shipment approval certificates. At the request of the Standing Advisory Group of the Safe Transport of Radioactive Material (SAGSTRAM), the Agency has established a programme to maintain a file of those certificates for packages and shipments which are either transported internationally or used outside the country of origin. The purpose of this directory is to facilitate the transfer of information to competent authorities and any other person wishing details on the packaging, authorized contents or special conditions pertinent to any package or shipment. The directory enables competent authorities to be aware of the status of any certificate submitted for validation. It also indicates any change in status of any certificate already validated. Future updates of the complete data will be distributed annually in a TECDOC form and, in addition, summary listings of the certificates will be issued every six months thereafter

Transport of radioactive materials on public roads - with regard to the authorizations granted to the Nuclear Center

International Nuclear Information System (INIS)

Berger, H.U.

1992-10-01

This report shall be a help for scientific and technical personal of the nuclear research center in the choice of the modalities of the transport of radioactive materials on public roads in accordance to regulations and authorizations. Not only the atomic law, the radiation protection ordinance and the ordinance on dangerous goods on roads, which are binding in any case, are regarded in this report but also as the scope and the impositions of the transport authorization of the nuclear research center as the internal instructions of the nuclear research center. With regard to the transport of nuclear fuel material only the cases of transport exempted of authorization and transport of such kinds waste containing nuclear fuel material treated where the waste has a density at most of 15g/cm 3 or where the package contains at most 15g of nuclear fuel material. The reader is guided by dialogue (pretty much as a book for' programmed learning') to the solution of his special problem of transport. In order to narrow down the size of this report, all technical or administrative details are treated in 11 brochures, which are published as technical supplements of this report. These supplements are available on request. (orig.) [de

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2000 edition

International Nuclear Information System (INIS)

2000-08-01

Safety in the transport of radioactive material is dependent on packaging appropriate for the contents being shipped, rather than on operational and/or administrative actions required on the package. The grater the radiological risk posed by the material being moved, the more stringent become the performance for the packaging that can be authorised to contain it. These principles have been expanded since 1061 into a set of regulations that are responsible for safety moving the ever-growing number and complexity of radioactive material shipments throughout the world. The IAEA Regulations for the Safe Transport of Radioactive Material are incorporated into UN regulations, as well as the requirements of other international transport organizations. This is the eleventh report published by the IAEA since implementing its database on package approval certificates (PACKTRAM) at the recommendation of the Transport safety Standards Advisory Committee (TRANSSAC). Through the PACKTRAM database, the IAEA collects administrative and technical information provided by the issuing competent authority about package approval certificates

Effect of pressure on the solution structure and hydrogen bond properties of aqueous N-methylacetamide

International Nuclear Information System (INIS)

Sarma, Rahul; Paul, Sandip

2012-01-01

Highlights: ► NMA molecules are associated mostly through their hydrophobic methyl groups. ► High pressure reduces association propensity causing dispersion of these moieties. ► Orientational polarization of vicinal water molecules near O and H atoms of NMA. ► NMA prefers to be a H-bond acceptor rather than a donor in interaction with water. ► Energy of these hydrogen bonds reduces slightly at high pressure. -- Abstract: Effects of high pressure on hydrophobic and hydrogen bonding interactions are investigated by employing molecular dynamics (MD) simulations of aqueous N-methylacetamide (NMA) solutions. Such systems are of interest mainly because high pressure causes protein denaturation and NMA is a computationally effective model to understand the atomic-level picture of pressure-induced structural transitions of protein. Simulations are performed for five different pressure values ranging from 1 atm to 8000 atm. We find that NMA molecules are associated mostly through their hydrophobic methyl groups and high pressure reduces this association propensity, causing dispersion of these moieties. At high pressure, structural void decreases and the packing efficiency of water molecules around NMA molecules increases. Hydrogen bond properties calculations show favorable NMA–NMA hydrogen bonds as compared to those of NMA–water hydrogen bonds and preference of NMA to be a hydrogen bond acceptor rather than a donor in interaction with water.

Regulations for the transport of radioactive material in Italy: the role of the Italian Competent Authority (ANPA)

International Nuclear Information System (INIS)

Orsini, A.; Trivelloni, S.

1995-01-01

In Italy four Ministries, Industry, Transport, Marine Merchandise and Interior, have the legal responsibility to issue and apply the transport safety regulations for radioactive material. ANPA, the National Agency for Environmental Protection, has the technical duty to issue the approval certificates and to support the various Ministries in authorizing carriers for all modes of transport, in updating the regulations and advising in the case of emergency conditions. ANPA is monitoring the quantity of radioactive material transported in Italy, the radiation doses of workers and public, and verifying the implementation of transport regulations through inspections of the carriers and during storage in transit and handling. (Author)

Advances in the GRADE approach to rate the certainty in estimates from a network meta-analysis.

Science.gov (United States)

Brignardello-Petersen, Romina; Bonner, Ashley; Alexander, Paul E; Siemieniuk, Reed A; Furukawa, Toshi A; Rochwerg, Bram; Hazlewood, Glen S; Alhazzani, Waleed; Mustafa, Reem A; Murad, M Hassan; Puhan, Milo A; Schünemann, Holger J; Guyatt, Gordon H

2018-01-01

This article describes conceptual advances of the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) working group guidance to evaluate the certainty of evidence (confidence in evidence, quality of evidence) from network meta-analysis (NMA). Application of the original GRADE guidance, published in 2014, in a number of NMAs has resulted in advances that strengthen its conceptual basis and make the process more efficient. This guidance will be useful for systematic review authors who aim to assess the certainty of all pairwise comparisons from an NMA and who are familiar with the basic concepts of NMA and the traditional GRADE approach for pairwise meta-analysis. Two principles of the original GRADE NMA guidance are that we need to rate the certainty of the evidence for each pairwise comparison within a network separately and that in doing so we need to consider both the direct and indirect evidence. We present, discuss, and illustrate four conceptual advances: (1) consideration of imprecision is not necessary when rating the direct and indirect estimates to inform the rating of NMA estimates, (2) there is no need to rate the indirect evidence when the certainty of the direct evidence is high and the contribution of the direct evidence to the network estimate is at least as great as that of the indirect evidence, (3) we should not trust a statistical test of global incoherence of the network to assess incoherence at the pairwise comparison level, and (4) in the presence of incoherence between direct and indirect evidence, the certainty of the evidence of each estimate can help decide which estimate to believe. Copyright © 2017 Elsevier Inc. All rights reserved.

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2002 ed

International Nuclear Information System (INIS)

2002-08-01

The current edition of the transport Regulations was published in 1996 and is more commonly referred to as 'ST-1'. Earlier Editions were known as Safety Series No. 6. The latest English reprint (2000) is now identified as TS-R-1 (ST-1, Revised). The transport Regulations elaborate requirements for the design, fabrication and maintenance of packaging as well as those for preparation, consigning, handling, carriage, storage in transit and receipt of the packages at final destination. Approval issued in the form of certificates is required for the design or shipment of packages. This report supersedes IAEA-TECDOC-1237 Directory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 2001 Edition. It is distributed worldwide to the IAEA Member States' competent authorities for transport, and other entities who have requested copies. Electronic copies of the main data file are provided to registered users of the PACKTRAM database. The information contained in this report is given in six tables. In each of these, information is presented in alphabetical order based on the certificate number. Tables 1 to 4 present administrative data including issue and expiry dates, package identification, package serial numbers, modes for which the package/shipment is approved and the edition of the IAEA Transport Safety Regulations on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table 5. Table 6 shows the certificates reported to the Secretariat by each participating Member State

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 2001 edition

International Nuclear Information System (INIS)

2001-08-01

The current edition of the transport Regulations was published in 1996 and is more commonly referred to as 'ST-1'. Earlier Editions were known as Safety Series No. 6. The latest English reprint (2000) is now identified as TS-R-1 (ST-1, Revised). The transport Regulations elaborate requirements for the design, fabrication and maintenance of packaging as well as those for preparation, consigning, handling, carriage, storage in transit and receipt of the packages at final destination. Approval issued in the form of certificates is required for the design or shipment of packages. This report supersedes IAEA-TECDOC-1171 D irectory of National Competent Authorities' Approval Certificates for Package Design, Special Form Material and Shipment of Radioactive Material, 2000 Edition . It is distributed worldwide to the IAEA Member States' competent authorities for transport, and other entities who have requested copies. Electronic copies of the main data file are provided to registered users of the PACKTRAM database. The information contained in this report is given in six tables. In each of these, information is presented in alphabetical order based on the certificate number. Tables 1 to 4 present administrative data including issue and expiry dates, package identification, package serial numbers, modes for which the package/shipment is approved and the edition of the IAEA Transport Safety Regulations on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table 5. Table 6 shows the certificates reported to the Secretariat by each participating Member State

Ensemble of Transition State Structures for the Cis-Trans Isomerization of N-Methylacetamide

Energy Technology Data Exchange (ETDEWEB)

Mantz, Yves A. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Branduardi, Davide [Italian Inst. of Technology, Genoa (Italy); Bussi, Giovanni [Univ. of Modena and Reggio Emilia and INFM-CNR (Italy); Parrinello, Michele [ETH Zurich, Lugano (Switzerland). Dept. of Chemistry and Applied Biosciences

2009-09-17

The cis-trans isomerization of N-methylacetamide (NMA), a model peptidic fragment, is studied theoretically in vacuo and in explicit water solvent at 300 K using the metadynamics technique. The computed cis-trans free energy difference is very similar for NMA(g) and NMA(aq), in agreement with experimental measurements of population ratios and theoretical studies at 0 K. By exploiting the flexibility in the definition of a pair of recently introduced collective variables (Branduardi, D.; Gervasio, F. L.; Parrinello, M. J. Chem. Phys. 2007, 126, 054103), an ensemble of transition state structures is generated at finite temperature for both NMA(g) and NMA(aq), as verified by computing committor distribution functions. Ensemble members of NMA(g) are shown to have correlated values of the backbone dihedral angle and a second dihedral angle involving the amide hydrogen atom. The dynamical character of these structures is preserved in the presence of solvent, whose influence on the committor functions can be modeled using effective friction/noise terms.

A network meta-analysis of atomoxetine and osmotic release oral system methylphenidate in the treatment of attention-deficit/hyperactivity disorder in adult patients.

Science.gov (United States)

Bushe, Chris; Day, Kathleen; Reed, Victoria; Karlsdotter, Kristina; Berggren, Lovisa; Pitcher, Ashley; Televantou, Foula; Haynes, Virginia

2016-05-01

The lack of head-to-head clinical studies powered to compare atomoxetine and osmotic release oral system (OROS) methylphenidate necessitates treatment comparison by methods that include indirect evidence such as network meta-analysis (NMA). A NMA assessing the relative treatment effects of atomoxetine and OROS methylphenidate in adults with attention-deficit/hyperactivity disorder (ADHD) was conducted. Studies were identified by systematic literature review. Analyses summarised improvements in efficacy, measured by ADHD-specific scales, using Cohen'sdto calculate the standardised mean difference (SMD), and all cause discontinuations. Results showed effect sizes (SMD, 95% credible interval (CrI)) relative to placebo that did not differ significantly between atomoxetine (0.46, 0.36-0.56) and OROS methylphenidate (0.51, 0.40-0.63) in clinical studies of up to 12 weeks' duration (SMD, 95% CrI for atomoxetine versus OROS methylphenidate: -0.05, -0.18-0.08). Patients treated with these medications responded better than those given placebo across all analyses. There was also no significant difference in discontinuation rates between atomoxetine and OROS methylphenidate (odds ratio, 95% CrI: 0.85, 0.53-1.35). Between-study heterogeneity was low overall. Results of this NMA suggest that the efficacy of atomoxetine and OROS methylphenidate in adults does not differ significantly. Clinical guidelines may require amendment to reflect these recent data. © The Author(s) 2016.

Multi-scaled normal mode analysis method for dynamics simulation of protein-membrane complexes: A case study of potassium channel gating motion correlations

Energy Technology Data Exchange (ETDEWEB)

Wu, Xiaokun; Han, Min; Ming, Dengming, E-mail: dming@fudan.edu.cn [Department of Physiology and Biophysics, School of Life Sciences, Fudan University, Shanghai (China)

2015-10-07

Membrane proteins play critically important roles in many cellular activities such as ions and small molecule transportation, signal recognition, and transduction. In order to fulfill their functions, these proteins must be placed in different membrane environments and a variety of protein-lipid interactions may affect the behavior of these proteins. One of the key effects of protein-lipid interactions is their ability to change the dynamics status of membrane proteins, thus adjusting their functions. Here, we present a multi-scaled normal mode analysis (mNMA) method to study the dynamics perturbation to the membrane proteins imposed by lipid bi-layer membrane fluctuations. In mNMA, channel proteins are simulated at all-atom level while the membrane is described with a coarse-grained model. mNMA calculations clearly show that channel gating motion can tightly couple with a variety of membrane deformations, including bending and twisting. We then examined bi-channel systems where two channels were separated with different distances. From mNMA calculations, we observed both positive and negative gating correlations between two neighboring channels, and the correlation has a maximum as the channel center-to-center distance is close to 2.5 times of their diameter. This distance is larger than recently found maximum attraction distance between two proteins embedded in membrane which is 1.5 times of the protein size, indicating that membrane fluctuation might impose collective motions among proteins within a larger area. The hybrid resolution feature in mNMA provides atomic dynamics information for key components in the system without costing much computer resource. We expect it to be a conventional simulation tool for ordinary laboratories to study the dynamics of very complicated biological assemblies. The source code is available upon request to the authors.

NL-Netherlands: No permit required for Fox Entertainment Group’s Acquisition of Dutch Soccer Broadcasting Rights

NARCIS (Netherlands)

Breemen, K.

2013-01-01

On 29 November 2012, the Raad van Bestuur (Board of Directors) of the Nederlandse Mededingingsautoriteit (Competition Authority - NMa) decided that the acquisition of Eredivisie Media & Marketing (EMM), exploiter of the Dutch premier league soccer broadcasting rights on behalf of the top league

36 CFR 228.40 - Authority.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Authority. 228.40 Section 228.40 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE MINERALS Disposal of Mineral Materials § 228.40 Authority. Authority for the disposal of mineral materials is provided by the...

Assessment of Quality Assurance Measures for Radioactive Material Transport Packages not Requiring Competent Authority Design Approval - 13282

International Nuclear Information System (INIS)

Komann, Steffen; Groeke, Carsten; Droste, Bernhard

2013-01-01

The majority of transports of radioactive materials are carried out in packages which don't need a package design approval by a competent authority. Low-active radioactive materials are transported in such packages e.g. in the medical and pharmaceutical industry and in the nuclear industry as well. Decommissioning of NPP's leads to a strong demand for packages to transport low and middle active radioactive waste. According to IAEA regulations the 'non-competent authority approved package types' are the Excepted Packages and the Industrial Packages of Type IP-1, IP-2 and IP-3 and packages of Type A. For these types of packages an assessment by the competent authority is required for the quality assurance measures for the design, manufacture, testing, documentation, use, maintenance and inspection (IAEA SSR 6, Chap. 306). In general a compliance audit of the manufacturer of the packaging is required during this assessment procedure. Their regulatory level in the IAEA regulations is not comparable with the 'regulatory density' for packages requiring competent authority package design approval. Practices in different countries lead to different approaches within the assessment of the quality assurance measures in the management system as well as in the quality assurance program of a special package design. To use the package or packaging in a safe manner and in compliance with the regulations a management system for each phase of the life of the package or packaging is necessary. The relevant IAEA-SSR6 chap. 801 requires documentary verification by the consignor concerning package compliance with the requirements. (authors)

Assessment of Quality Assurance Measures for Radioactive Material Transport Packages not Requiring Competent Authority Design Approval - 13282

Energy Technology Data Exchange (ETDEWEB)

Komann, Steffen; Groeke, Carsten; Droste, Bernhard [BAM Federal Institute for Materials Research and Testing, Unter den Eichen 44-46, 12203 Berlin (Germany)

2013-07-01

The majority of transports of radioactive materials are carried out in packages which don't need a package design approval by a competent authority. Low-active radioactive materials are transported in such packages e.g. in the medical and pharmaceutical industry and in the nuclear industry as well. Decommissioning of NPP's leads to a strong demand for packages to transport low and middle active radioactive waste. According to IAEA regulations the 'non-competent authority approved package types' are the Excepted Packages and the Industrial Packages of Type IP-1, IP-2 and IP-3 and packages of Type A. For these types of packages an assessment by the competent authority is required for the quality assurance measures for the design, manufacture, testing, documentation, use, maintenance and inspection (IAEA SSR 6, Chap. 306). In general a compliance audit of the manufacturer of the packaging is required during this assessment procedure. Their regulatory level in the IAEA regulations is not comparable with the 'regulatory density' for packages requiring competent authority package design approval. Practices in different countries lead to different approaches within the assessment of the quality assurance measures in the management system as well as in the quality assurance program of a special package design. To use the package or packaging in a safe manner and in compliance with the regulations a management system for each phase of the life of the package or packaging is necessary. The relevant IAEA-SSR6 chap. 801 requires documentary verification by the consignor concerning package compliance with the requirements. (authors)

Cutback for grid operators; Netbeheerders energie gekort

Energy Technology Data Exchange (ETDEWEB)

Meulmeester, P. [GEN Nederland, Rotterdam (Netherlands); De Laat, J. [NRE Netwerk, Eindhoven (Netherlands)

2006-02-24

The Netherlands Competition Authority (NMa), in which the Office of Energy Regulation (DTe) is included plan to decrease the capital cost compensation (or weighted average cost of capital or WACC) for grid operators. In this article it is explained how the compensation is calculated, why this measure will be taken and what the effects of this cutback are. [Dutch] De NMa/DTe wil de vermogenskostenvergoeding voor netbeheerders naar beneden bijstellen. In dit stuk worden de effecten van deze verlaging besproken door eerst uitleg te geven over maatstafconcurrentie als reguleringssystematiek en de rol van de vermogenskostenvergoeding in deze systematiek. Hierna wordt verklaard hoe de vermogenskostenvergoeding wordt berekend en waarom deze wordt veranderd. Tot slot bekijken we het effect van deze verlaging.

Author Details

African Journals Online (AJOL)

Samad, H. A.. Vol 9, No 6S (2017) - Articles Characterization study of industrial waste glass as starting material in development of bioactive materials. Abstract PDF. ISSN: 1112-9867. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

Signal estimation and change detection in tank data for nuclear safeguards

International Nuclear Information System (INIS)

Burr, Tom; Suzuki, Mitsutoshi; Howell, John; Longo, Claire E.; Hamada, Michael S.

2011-01-01

Process monitoring (PM) is increasingly important in nuclear safeguards as a complement to mass-balance based nuclear materials accounting (NMA). Typically, PM involves more frequent but lower quality measurements than NMA. While NMA estimates special nuclear material (SNM) mass balances and uncertainties, PM often tracks SNM attributes qualitatively or in the case of solution monitoring (SM) tracks bulk mass and volume. Automatic event marking is used in several nuclear safeguards PM systems. The aims are to locate the start and stop times and signal changes associated with key events. This paper describes results using both real and simulated SM data to quantify the errors associated with imperfect marking of start and stop times of tank events such as receipts and shipments. In the context of safeguards, one can look both forward and backward in modest time intervals to recognize events. Event marking methods evaluated include differencing, multi-scale principal component analysis using wavelets, and piecewise linear regression (PLR). All methods are evaluated on both raw and smoothed data, and several smoothing options are compared, including standard filters, hybrid filters, and local kernel smoothing. The main finding for real and simulated examples considered is that a two-step strategy is most effective. First, any reasonably effective initial smoother is used to provide a good initial guess at change point locations. Second, PLR is applied, looking for one change point at a time. In contrast, PLR that allows for multiple change points simultaneously has worse performance.

Public Notice of Nuclear Regulatory Authority of the Slovak Republic No. 46/2006 Coll. on specific material and facilities that are under supervision of the Nuclear Regulatory Authority of the Slovak Republic

International Nuclear Information System (INIS)

Vaclav, J.

2006-01-01

The Public Notice defines the list of specific material and facilities which are under supervision of the Nuclear Regulatory Authority of the Slovak Republic with taking into consideration the requirements in accordance with the new atomic Act and other material. The national competence's have been practically divided in the Public Notice. These competence's concern the execution of directly binding EU rule and the Public Notice gives the details about the dividing of specific materials

Recent advances in nuclear forensic science - The identification of unknown nuclear materials and co-operation with the legal authorities

International Nuclear Information System (INIS)

Ray, I.L.F.; Schubert, A.; Schenkel, R.

2001-01-01

Full text: Nuclear Forensic Science is a new branch of forensic science, which has arisen out of necessity following the dissolution of the former Soviet Union and East Block countries. One result of this break up was the emergence of a new form of smuggling, involving nuclear materials, radioactive sources and scrap metal contaminated with radioactive substances. Since 1994 the Institute for Transuranium Elements of the European Commission Joint Research Centre has played a major role in combating the illicit trafficking in nuclear materials and contaminated scrap metals. The Institute has the advantages of extensive experience in handling these materials, which require sophisticated instruments mounted in glove boxes. As part of the European Commission Joint Research Centre the Institute is also independent of national interests within the European Union and abroad. Some twenty-five cases of illicit trafficking have been examined so far. Some of the latest cases will be described and the methods developed at the Institute for isotopic and microstructural fingerprinting of nuclear materials will be illustrated. The microstructural fingerprint is a new technique developed here, which complements the isotopic analysis of the samples, and is highly characteristic of the production process and subsequent history of the materials involved. Furthermore, the microstructural fingerprint cannot be disguised by, for example, the addition of other substances or isotopes to the sample. An extensive database on commercial nuclear materials is maintained by the Institute, and this is being enlarged to include microstructural information such as porosity, grain size, precipitation, dislocation structures, pellet surface roughness, etc. The database can be used for comparison when samples of unknown provenance are seized. The Institute places emphasis on developing close co-operation with the legal authorities to optimize the side-by-side working of law enforcement officers and

Kamu Yönetiminde Bir Yönetişim Hedefi Olarak Kaynak Optimizasyonu: Kalkınma Ajanslarında COBIT-5 Çerçevesinde Bir Analiz

Directory of Open Access Journals (Sweden)

Ahmet Efe

2016-01-01

Full Text Available Kurumsal kaynak planlaması (ERP ve insan kaynakları yönetimi (HRM sistemleri sayesinde fiziki, beşeri, fikri ve mali kaynakların yönetimi gibi kavramlar, standartlar ve gerektirdikleri uygulamalar işletmecilik ve kamu yönetimi alanına girmiştir. Ancak kaynak optimizasyonu yaklaşımı ise ilk defa bir yönetişim hedefi ve süreci olarak yapılandırılması olarak COBİT-5 ile ortaya atılmıştır. Bu çalışmada kaynak optimizasyonu ile ilgili olarak Türkiye’de kalkınma ajansları (KA ve bölgesel gelişme dinamiklerinde yapılandırılmış bir yaklaşımın mevcut olmadığından dolayı Devlet Denetleme Kurulu (DDK tarafından belirlenmiş olan kurumsal sorunların çekirdek nedenleri araştırma problemi olarak ele alınmaktadır. COBIT-5 kaynak optimizasyonu ile ilgili modellemesinin KA dinamiklerine uyabilecek ve ilişkili kurumsal sorunları çözebilecek bir modellemenin olanaklı olduğu araştırmamızda iddia edilmektedir. Bu çerçevede yapılan analizler sonucunda kaynak optimizasyonu sürecinin KA dinamiklerinde nasıl işletilebileceği, kilit performans göstergeleri, kriter faaliyetler ile süreçlerde sorumlu, mesul, danışılan ve bilgilendirilen rollerin neler olduğu tespit edilmeye çalışılmaktadır.

A New Approach to Authoring Interactive Curricular Material

Science.gov (United States)

Christian, Wolfgang

2001-10-01

It is still not common to find computer-based interactive material incorporated into mainstream teaching. Learning the intricacies of a software package is a poor investment of time if the half-life of the textbook is longer than the half-life of the computer technology. Internet technologies are likely to change this situation. This talk describes a set of Java applets, known as Physlets, which make use of these technologies. Physlets are designed to communicate with browsers by employing a scripting language such as JavaScript, thereby allowing one applet to be used in many different contexts. This approach makes it possible to use a modular object-oriented approach for the design of material. But this is not enough. Effective curriculum development must couple our software design philosophy with research into the effectiveness of computer-based instruction. Examples of Physlet-based curricular material will be presented.

Report on Concepts & Approaches for SSBD for eCHEM

Energy Technology Data Exchange (ETDEWEB)

Murphy, Chantell Lynne-Marie [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-09-29

The verification of special nuclear material (SNM) in spent fuel pyroprocessing is an important safeguards challenge. The detection of spontaneous fission (SF) neutrons from curium is an accepted, non-destructive technique that has been applied to verify special nuclear material (SNM) content in used fuel and other materials in the fuel cycle. The nuclear material accounting (NMA) technique at the Korea Atomic Energy Research Institute’s Reference Engineering-scale Pyroprocessing Facility (REPF) is based on the Cm balance technique. Several publications have demonstrated the safeguards benefit from using process monitoring (PM) on nuclear facilities as a complementary measure to NMA. More recently, this concept was expanded and preliminarily demonstrated for pyroprocessing. The concept of Signature Based Safeguards (SBS) is part of this expansion, and is built around the interpretation of input from various sensors in a declared facility coupled with complementary NMA methods to increase confidence and lower standard error inventory differences (SEID). The SBS methodology was conceptually developed and relies on near real time analysis of process monitoring data to detect material diversion complemented by robust containment and surveillance (C/S) measures. This work demonstrates one example of how the SBS framework can be used in the electrorefiner. In this SBS application, a combination of cyclic voltammetry (CV) and neutron counting is applied to track and monitor Pu mass balance. The main purpose of this experiment is to determine if meaningful information can be gained from CV measurements with regard to the Mg/Gd ratio. This data will be coupled with ICP-MS to verify Gd concentrations and analyzed for statistical significance. It is expected the CV data will register a significant change under the off-normal operating conditions. Knowing how to identify and interpret those changes may help inform how to target more traditional neutron counting methods

Regulations for the transport of radioactive material in Italy: the role of the Italian Competent Authority (ANPA)

International Nuclear Information System (INIS)

Orsini, A.; Trivelloni, S.

1995-01-01

In Italy four Ministries, Industry, Transport, Marine Merchandise and Interior, have the legal responsibility to issue and apply the transport safety regulations for radioactive material. ANPA, the National Agency for Environmental Protection, has the technical duty to issue the approval certificates and to support the various Ministries in authorising carriers for all modes of transport, in updating the regulations and advising in the case of emergency conditions. ANPA is monitoring the quantity of radioactive material transported in Italy, the radiation doses of workers and public, and verifying the implementation of transport regulations through inspection of the carriers and during storage in transit and handling. (author)

The PACKTRAM database on national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. User's guide for compiled system program

International Nuclear Information System (INIS)

1995-01-01

The PACKTRAM system program enables Member States to prepare data diskettes on national competent authorities' approval certificates for package design, special form material and shipment of radioactive material, for submission to the IAEA, and facilitates data manipulation and report preparation for the IAEA. The system program is provided as a 424 kbyte executable file, for which this document is the User Guide. The system is fully menu-driven and requires an IBM-compatible personal computer with a minimum of 640 kbyte random access memory, a hard drive and one 3-1/2 inch diskette drive. 3 refs, 6 tabs

Diagnostics for generalized linear hierarchical models in network meta-analysis.

Science.gov (United States)

Zhao, Hong; Hodges, James S; Carlin, Bradley P

2017-09-01

Network meta-analysis (NMA) combines direct and indirect evidence comparing more than 2 treatments. Inconsistency arises when these 2 information sources differ. Previous work focuses on inconsistency detection, but little has been done on how to proceed after identifying inconsistency. The key issue is whether inconsistency changes an NMA's substantive conclusions. In this paper, we examine such discrepancies from a diagnostic point of view. Our methods seek to detect influential and outlying observations in NMA at a trial-by-arm level. These observations may have a large effect on the parameter estimates in NMA, or they may deviate markedly from other observations. We develop formal diagnostics for a Bayesian hierarchical model to check the effect of deleting any observation. Diagnostics are specified for generalized linear hierarchical NMA models and investigated for both published and simulated datasets. Results from our example dataset using either contrast- or arm-based models and from the simulated datasets indicate that the sources of inconsistency in NMA tend not to be influential, though results from the example dataset suggest that they are likely to be outliers. This mimics a familiar result from linear model theory, in which outliers with low leverage are not influential. Future extensions include incorporating baseline covariates and individual-level patient data. Copyright © 2017 John Wiley & Sons, Ltd.

Ocean Dredged Material Disposal Site (ODMDS) Authorization and Short-Term FATE (STFATE) Model Analysis: 2014-2015 Working Group Findings Report

Science.gov (United States)

2016-03-01

fractions A grain size or sieve analysis typically yields the mass fraction of each particle size class after dispersing all of the material. However...ER D C TR -1 6- 2 Ocean Dredged Material Disposal Site (ODMDS) Authorization and Short-Term FATE (STFATE) Model Analysis 2014 – 2015...Term FATE (STFATE) Model Analysis 2014 – 2015 Working Group Findings Report Jase D. Ousley Coastal and Hydraulics Laboratory U.S. Army Engineer

Regulatory authority infrastructure for Namibia

International Nuclear Information System (INIS)

Shangula, K.

2001-01-01

The Republic of Namibia is participating in the International Atomic Energy Agency's Model Project for the Improvement of National Regulatory Authority Infrastructures in Member States. The paper illustrates our experience in solving problems and difficulties confronted in establishing an effective regulatory authority operating within the existing national infrastructure that should be supported by the Government. An effective regulatory authority is seen as part of the wider administrative scope of our Government through ministerial mandates given by the State from time to time, guaranteeing its independence when implementing legal provisions under statutes. Sections of the report illustrate our experience in the following areas: 1. National radiation protection policy 2. Structure of our national regulatory authority 3. Laws and regulations 4. Provisions for notification, authorization and registration 5. In-depth security measures for radiation sources and radioactive material 6. Systems for the inspection of radiation sources, radioactive materials, enforcement of legal provisions 7. Extent of the applications of radiation sources and radioactive materials in the country. The paper provides information regarding existing Government policy on radiation protection; structure and legal aspects of the national regulatory, including statutes and regulations; the extent of application and uses of radiation sources and security of radioactive materials; human resources: strengths and constraints; management practices and financing of regulatory authority; and plans for emergency recovery of orphan sources. National plans for management of disused sources, recovery of orphan sources, abnormal emergencies, communication of information to affected persons on exposure effects, and the safety training of persons using these applications are discussed. the paper provides a summary and some suggestions of the way forward for Namibia. (author)

Cutback for grid operators

International Nuclear Information System (INIS)

Meulmeester, P.; De Laat, J.

2006-01-01

The Netherlands Competition Authority (NMa), in which the Office of Energy Regulation (DTe) is included plan to decrease the capital cost compensation (or weighted average cost of capital or WACC) for grid operators. In this article it is explained how the compensation is calculated, why this measure will be taken and what the effects of this cutback are [nl

Relation of glypican-3 and E-cadherin expressions to clinicopathological features and prognosis of mucinous and non-mucinous colorectal adenocarcinoma.

Science.gov (United States)

Foda, Abd Al-Rahman Mohammad; Mohammad, Mie Ali; Abdel-Aziz, Azza; El-Hawary, Amira Kamal

2015-06-01

Glypican-3 (GPC3) is a member of the membrane-bound heparin sulfate proteoglycans. E-cadherin is an adhesive receptor that is believed to act as a tumor suppressor gene. Many studies had investigated E-cadherin expressions in colorectal carcinoma (CRC) while only one study had investigated GPC3 expression in CRC. This study aims to investigate expression of GCP3 and E-cadherin in colorectal mucinous carcinoma (MA) and non-mucinous adenocarcinoma (NMA) using manual tissue microarray technique. Tumor tissue specimens are collected from 75 cases of MC and 75 cases of NMA who underwent radical surgery from Jan 2007 to Jan 2012 at the Gastroenterology Centre, Mansoura University, Egypt. Their clinicopathological parameters and survival data were revised and analyzed using established statistical methodologies. High-density manual tissue microarrays were constructed using modified mechanical pencil tip technique and immunohistochemistry for GPC3 and E-cadherin was done. NMA showed higher expression of GPC3 than MA with no statistically significant relation. NMA showed a significantly higher E-cadherin expression than MA. GPC3 and E-cadherin positivity rates were significantly interrelated in NMA, but not in MA, group. In NMA group, there was no significant relation between either GPC3 or E-cadherin expression and the clinicopathological features. In a univariate analysis, neither GPC3 nor E-cadherin expression showed a significant impact on disease-free survival (DFS) or overall survival (OS). GPC3 and E-cadherin expressions are not independent prognostic factors in CRC. However, expressions of both are significantly interrelated in NMA patients, suggesting an excellent interplay between both, in contrast to MA. Further molecular studies are needed to further explore the relationship between GCP3 and E-cadherin in colorectal carcinogenesis.

Decree-Law No. 375/90 of 10 November 1990 designating the competent national authority for the physical protection of nuclear material

International Nuclear Information System (INIS)

1990-01-01

This Decree-Law designates, in accordance with the Convention on the Physical Protection of Nuclear Material, the Protection and Nuclear Safety Bureau (GPSN) of the Ministry of the Environment and Natural Resources as the national competent authority in relation to physical protection matters. Accordingly, the import, manufacture, possession, purchase, sale or transfer of nuclear material, as well as its transport, are subject to prior authorisation by the GPSN [fr

33 CFR 335.2 - Authority.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Authority. 335.2 Section 335.2 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE OPERATION... FILL MATERIAL INTO WATERS OF THE U.S. OR OCEAN WATERS § 335.2 Authority. Under authority delegated from...

The Author as Scribe. Materiality and Textuality in the Trecento

OpenAIRE

Aresu, Francesco Marco

2015-01-01

In my dissertation, I explore the relationship between the material aspects of an editorial artifact and their literary implications for the texts it contains. I show how the interpretation of a text needs to be accompanied by an inquiry into the material conditions of its production, circulation and reception. This study is intended as both an investigation of the material foundations of institutions of literary study and a reflection on some often neglected sides of contemporary theorizatio...

Author Details

African Journals Online (AJOL)

Ubani, EC. Vol 3, No 1 (2008) - Articles Network-Based Material Requirements Planning (NBMRP) in Product Development Project Abstract PDF · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use ...

Author Details

African Journals Online (AJOL)

Gwarzo, SM. Vol 12, No 1 (2015) - Articles Material, compressional and mechanical properties of Borassus aethiopum (African fan palm) starches. Abstract. ISSN: 0189-8442. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms ...

Author Details

African Journals Online (AJOL)

Farahbakhsh, M. Vol 5, No 4 (2013) - Articles Optimum material gradient composition for the functionally graded piezoelectric beams. Abstract PDF. ISSN: 2141-2839. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and ...

Author Details

African Journals Online (AJOL)

Taskin, A.V.. Vol 9, No 2S (2017): Special Issue - Articles An experimental study on gold precipitation from leach solutions of technogenic gold-bearing raw materials. Abstract PDF. ISSN: 1112-9867. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL ...

Author Details

African Journals Online (AJOL)

Lartey, KS. Vol 5, No 1 (2007) - Articles Evaluation Of A Multipurpose Tile Body Developed From Ghanaian Raw Materials Abstract · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL ...

Author Details

African Journals Online (AJOL)

Ejuh, Geh Wilson. Vol 20 (2012) - Articles Linearity and Non-linearity of Photorefractive effect in Materials using the Band transport Model Abstract. ISSN: 1116-4336. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and ...

Author Details

African Journals Online (AJOL)

Okou, R. Vol 23 (2011): Series C - Articles Phase change material selection for small scale solar energy storage systems. Abstract PDF. ISSN: 2305-2678. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of ...

Author Details

African Journals Online (AJOL)

Ekosse, Georges-Ivo E. Vol 5, No 2 (2005) - Articles Diagnostic evaluation of bentonitic and kaolinitic clayey materials for ceramic applications. Abstract PDF · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions ...

A polarizable QM/MM approach to the molecular dynamics of amide groups solvated in water

Energy Technology Data Exchange (ETDEWEB)

Schwörer, Magnus; Wichmann, Christoph; Tavan, Paul, E-mail: tavan@physik.uni-muenchen.de [Lehrstuhl für BioMolekulare Optik, Ludwig-Maximilians Universität München, Oettingenstr. 67, 80538 München (Germany)

2016-03-21

The infrared (IR) spectra of polypeptides are dominated by the so-called amide bands. Because they originate from the strongly polar and polarizable amide groups (AGs) making up the backbone, their spectral positions sensitively depend on the local electric fields. Aiming at accurate computations of these IR spectra by molecular dynamics (MD) simulations, which derive atomic forces from a hybrid quantum and molecular mechanics (QM/MM) Hamiltonian, here we consider the effects of solvation in bulk liquid water on the amide bands of the AG model compound N-methyl-acetamide (NMA). As QM approach to NMA we choose grid-based density functional theory (DFT). For the surrounding MM water, we develop, largely based on computations, a polarizable molecular mechanics (PMM) model potential called GP6P, which features six Gaussian electrostatic sources (one induced dipole, five static partial charge distributions) and, therefore, avoids spurious distortions of the DFT electron density in hybrid DFT/PMM simulations. Bulk liquid GP6P is shown to have favorable properties at the thermodynamic conditions of the parameterization and beyond. Lennard-Jones (LJ) parameters of the DFT fragment NMA are optimized by comparing radial distribution functions in the surrounding GP6P liquid with reference data obtained from a “first-principles” DFT-MD simulation. Finally, IR spectra of NMA in GP6P water are calculated from extended DFT/PMM-MD trajectories, in which the NMA is treated by three different DFT functionals (BP, BLYP, B3LYP). Method-specific frequency scaling factors are derived from DFT-MD simulations of isolated NMA. The DFT/PMM-MD simulations with GP6P and with the optimized LJ parameters then excellently predict the effects of aqueous solvation and deuteration observed in the IR spectra of NMA. As a result, the methods required to accurately compute such spectra by DFT/PMM-MD also for larger peptides in aqueous solution are now at hand.

Türkiye'de Kadınla İlgili Kalkınma Politikalarının ve Projelerinin Eleştirel Bir Değerlendirmesi A Critical Evaluation of Gender Related Development Policy and Projects in Turkey

Directory of Open Access Journals (Sweden)

Gökhan GÖKULU

2013-09-01

Full Text Available In this study, how women are included in development policy,program and projects and the content of the gender equality policies ofpublic institutions will tried analyzed in relation with the theoriesregarding relationship of development and women and theinternationally accepted (by UN and EU gender values. The problem ofwomen’s development and ensuring gender equality in Turkey is onlybecome a issue after the agreement of CEDAW with UN and theintegration process of Turkey to EU. Even if the principles of increasingthe women’s socio-economic status, enhancing the gender equality andelimination of all discriminations against women are stated andpromised by the development plans and Genel Directorate of Women’sStatus, there are problems and ambiguities in the execution of theseprinciples. The primary reason for this is that the related principleswere not accepted yet by the related public institutions (central andlocal and their personal but only became an issue because of thecommitments of the state to EU and UN and the lack of long termpolicies to be designed to alter the socially accepted judgements thatprevent the equality of men and women. Instead of this, as it isobserved both in the projects of public institutions, and in the nongovermentalinstitutions, the activities carried out for sustainingwomen’s development and equal status with men is oriented topreparing and implying projects to increase women’s economic activitiesand contribute to family’s subsistence. In addition, for sustaining thesucesss of policies aiming gender equality and acceptance of thesepolicies by the targeted social groups, the participation of these targetedsocial groups to the policy making process as decision makers arerequired. Bu çalışma, Türkiye’deki kadınların kalkınma politika, program ve projelerine nasıl ve hangi biçimde dâhil olduklarını ve toplumsal cinsiyet eşitliğine dayalı kamusal politikaların içeriğini, kadınların kalkınma

Mucinous Colorectal Adenocarcinoma: Influence of EGFR and E-Cadherin Expression on Clinicopathologic Features and Prognosis.

Science.gov (United States)

Foda, Abd AlRahman M; AbdelAziz, Azza; El-Hawary, Amira K; Hosni, Ali; Zalata, Khalid R; Gado, Asmaa I

2015-08-01

Previous studies have shown conflicting results on epidermal growth factor receptor (EGFR) and E-cadherin expression in colorectal carcinoma and their prognostic significance. To the best of our knowledge, this study is the first to investigate EGFR and E-cadherin expression, interrelation and relation to clinicopathologic, histologic parameters, and survival in rare colorectal mucinous adenocarcinoma (MA). In this study, we studied tumor tissue specimens from 150 patients with colorectal MA and nonmucinous adenocarcinoma (NMA). High-density manual tissue microarrays were constructed using modified mechanical pencil tips technique, and immunohistochemistry for EGFR and E-cadherin was performed. All relations were analyzed using established statistical methodologies. NMA expressed EGFR and E-cadherin in significantly higher rates with significant heterogenous pattern than MA. EGFR and E-cadherin positivity rates were significantly interrelated in both NMA and MA groups. In the NMA group, high EGFR expression was associated with old age, male sex, multiplicity of tumors, lack of mucinous component, and association with schistosomiasis. However, in the MA group, high EGFR expression was associated only with old age and MA subtype rather than signet ring carcinoma subtype. Conversely, high E-cadherin expression in MA cases was associated with old age, fungating tumor configuration, MA subtype, and negative intratumoral lymphocytic response. However, in the NMA cases, none of these factors was statistically significant. In a univariate analysis, neither EGFR nor E-cadherin expression showed a significant impact on disease-free or overall survival. Targeted therapy against EGFR and E-cadherin may not be useful in patients with MA. Neither EGFR nor E-cadherin is an independent prognostic factor in NMA or MA.

A process for assessing the feasibility of a network meta-analysis: a case study of everolimus in combination with hormonal therapy versus chemotherapy for advanced breast cancer.

Science.gov (United States)

Cope, Shannon; Zhang, Jie; Saletan, Stephen; Smiechowski, Brielan; Jansen, Jeroen P; Schmid, Peter

2014-06-05

The aim of this study is to outline a general process for assessing the feasibility of performing a valid network meta-analysis (NMA) of randomized controlled trials (RCTs) to synthesize direct and indirect evidence for alternative treatments for a specific disease population. Several steps to assess the feasibility of an NMA are proposed based on existing recommendations. Next, a case study is used to illustrate this NMA feasibility assessment process in order to compare everolimus in combination with hormonal therapy to alternative chemotherapies in terms of progression-free survival for women with advanced breast cancer. A general process for assessing the feasibility of an NMA is outlined that incorporates explicit steps to visualize the heterogeneity in terms of treatment and outcome characteristics (Part A) as well as the study and patient characteristics (Part B). Additionally, steps are performed to illustrate differences within and across different types of direct comparisons in terms of baseline risk (Part C) and observed treatment effects (Part D) since there is a risk that the treatment effect modifiers identified may not explain the observed heterogeneity or inconsistency in the results due to unexpected, unreported or unmeasured differences. Depending on the data available, alternative approaches are suggested: list assumptions, perform a meta-regression analysis, subgroup analysis, sensitivity analyses, or summarize why an NMA is not feasible. The process outlined to assess the feasibility of an NMA provides a stepwise framework that will help to ensure that the underlying assumptions are systematically explored and that the risks (and benefits) of pooling and indirectly comparing treatment effects from RCTs for a particular research question are transparent.

76 FR 11569 - Hazardous Materials: Enhanced Enforcement Authority Procedures

Science.gov (United States)

2011-03-02

..., providing the industry a greater sense of the parameters within which agents may exercise this authority... be expanded to include packages consigned for medical use because the urgency of these deliveries is...

Network meta-analysis using R: a review of currently available automated packages.

Directory of Open Access Journals (Sweden)

Binod Neupane

Full Text Available Network meta-analysis (NMA--a statistical technique that allows comparison of multiple treatments in the same meta-analysis simultaneously--has become increasingly popular in the medical literature in recent years. The statistical methodology underpinning this technique and software tools for implementing the methods are evolving. Both commercial and freely available statistical software packages have been developed to facilitate the statistical computations using NMA with varying degrees of functionality and ease of use. This paper aims to introduce the reader to three R packages, namely, gemtc, pcnetmeta, and netmeta, which are freely available software tools implemented in R. Each automates the process of performing NMA so that users can perform the analysis with minimal computational effort. We present, compare and contrast the availability and functionality of different important features of NMA in these three packages so that clinical investigators and researchers can determine which R packages to implement depending on their analysis needs. Four summary tables detailing (i data input and network plotting, (ii modeling options, (iii assumption checking and diagnostic testing, and (iv inference and reporting tools, are provided, along with an analysis of a previously published dataset to illustrate the outputs available from each package. We demonstrate that each of the three packages provides a useful set of tools, and combined provide users with nearly all functionality that might be desired when conducting a NMA.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 20

International Nuclear Information System (INIS)

1989-03-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 24

International Nuclear Information System (INIS)

1993-01-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 20

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-03-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 25

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-01-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 19

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-01-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 18

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-12-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 19

International Nuclear Information System (INIS)

1988-01-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 25

International Nuclear Information System (INIS)

1994-01-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 18

International Nuclear Information System (INIS)

1986-12-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 21

International Nuclear Information System (INIS)

1990-02-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 23

International Nuclear Information System (INIS)

1992-01-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 22

International Nuclear Information System (INIS)

1991-01-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 23

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-01-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 24

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-01-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 22

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-01-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 21

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-02-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

Three-dimensional evidence network plot system: covariate imbalances and effects in network meta-analysis explored using a new software tool.

Science.gov (United States)

Batson, Sarah; Score, Robert; Sutton, Alex J

2017-06-01

The aim of the study was to develop the three-dimensional (3D) evidence network plot system-a novel web-based interactive 3D tool to facilitate the visualization and exploration of covariate distributions and imbalances across evidence networks for network meta-analysis (NMA). We developed the 3D evidence network plot system within an AngularJS environment using a third party JavaScript library (Three.js) to create the 3D element of the application. Data used to enable the creation of the 3D element for a particular topic are inputted via a Microsoft Excel template spreadsheet that has been specifically formatted to hold these data. We display and discuss the findings of applying the tool to two NMA examples considering multiple covariates. These two examples have been previously identified as having potentially important covariate effects and allow us to document the various features of the tool while illustrating how it can be used. The 3D evidence network plot system provides an immediate, intuitive, and accessible way to assess the similarity and differences between the values of covariates for individual studies within and between each treatment contrast in an evidence network. In this way, differences between the studies, which may invalidate the usual assumptions of an NMA, can be identified for further scrutiny. Hence, the tool facilitates NMA feasibility/validity assessments and aids in the interpretation of NMA results. The 3D evidence network plot system is the first tool designed specifically to visualize covariate distributions and imbalances across evidence networks in 3D. This will be of primary interest to systematic review and meta-analysis researchers and, more generally, those assessing the validity and robustness of an NMA to inform reimbursement decisions. Copyright © 2017 Elsevier Inc. All rights reserved.

Aberrant Expression of Calretinin, D2-40 and Mesothelin in Mucinous and Non-Mucinous Colorectal Carcinomas and Relation to Clinicopathological Features and Prognosis.

Science.gov (United States)

Foda, Abd AlRahman Mohammad; El-Hawary, Amira Kamal; Hamed, Hazem

2016-10-01

CRC is a heterogeneous disease in terms of morphology, invasive behavior, metastatic capacity, and clinical outcome. Recently, many so-called mesothelial markers, including calretinin, D2-40, WT1, thrombomodulin, mesothelin, and others, have been certified. The aim of this study was to assess the immunohistochemical expression of calretinin and other mesothelial markers (D2-40 and mesothelin) in colorectal mucinous adenocarcinoma (MA) and non mucinous adenocarcinoma (NMA) specimens and relation to clinicopathological features and prognosis using manual tissue microarray technique. We studied tumor tissue specimens from 150 patients with colorectal MA and NMA who underwent radical surgery from January 2007 to January 2012. High-density manual tissue microarrays were constructed using a modified mechanical pencil tip technique, and paraffin sections were submitted for immunohistochemistry using Calretinin, D2-40 and mesothelin expressions. We found that NMA showed significantly more calretinin and D2-40 expression than MA In contrast, no statistically significant difference between NMA and MA was detected in mesothelin expression. There were no statistically significant relations between any of the clinicopathological or histological parameters and any of the three markers. In a univariate analysis, neither calretinin nor D2-40 expressions showed any significant relations to DFS or OS. However, mesothelin luminal expression was significantly associated with worse DFS. Multivariate Cox regression analysis proved that luminal mesothelin expression was an independent negative prognostic factor in NMA. In conclusion, Calretinin, D2-40 and mesothelin are aberrantly expressed in a proportion of CRC cases with more expression in NMA than MA. Aberrant expression of these mesothelial markers was not associated with clinicopathological or histological features of CRCs. Only mesothelin expression appears to be a strong predictor of adverse prognosis.

The procedure for amendment of the technical conditions for electricity and natural gas. An essay on certain generally binding regulations

International Nuclear Information System (INIS)

Janssen, J.J.

2009-01-01

The energy law for the regulated Electricity and gas market has a stratified structure. The tariff structures and conditions that are established by the executive board of the Netherlands Competition Authority (NMa), based on article 36 of the Electricity Act 1998 and article 12f of the Gas Act, are in a way the tailpiece. This article focuses mainly on the procedure for amendment of these conditions. [nl

Genotoxicity testing approaches for the safety assessment of substances used in food contact materials prior to their authorization in the European Union.

Science.gov (United States)

Bolognesi, Claudia; Castoldi, Anna F; Crebelli, Riccardo; Barthélémy, Eric; Maurici, Daniela; Wölfle, Detlef; Volk, Katharina; Castle, Laurence

2017-06-01

Food contact materials are all materials and articles intended to come directly or indirectly into contact with food. Before being included in the positive European "Union list" of authorized substances (monomers, other starting substances and additives) for plastic food contact materials, the European Food Safety Authority (EFSA) must assess their safety "in use". If relevant for risk, the safety of the main impurities, reaction and degradation products originating from the manufacturing process is also evaluated. Information on genotoxicity is always required irrespective of the extent of migration and the resulting human exposure, in view of the theoretical lack of threshold for genotoxic events. The 2008 EFSA approach, requiring the testing of food contact materials in three in vitro mutagenicity tests, though still acceptable, is now superseded by the 2011 EFSA Scientific Committee's recommendation for only two complementary tests including a bacterial gene mutation test and an in vitro micronucleus test, to detect two main genetic endpoints (i.e., gene mutations and chromosome aberrations). Follow-up of in vitro positive results depends on the type of genetic effect and on the substance's systemic availability. In this study, we provide an analysis of the data on genotoxicity testing gathered by EFSA on food contact materials for the period 1992-2015. We also illustrate practical examples of the approaches that EFSA took when evaluating "non standard" food contact chemicals (e.g., polymeric additives, oligomer or other reaction mixtures, and nanosubstances). Additionally, EFSA's experience gained from using non testing methods and/or future possibilities in this area are discussed. Environ. Mol. Mutagen. 58:361-374, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Materials And Processes Technical Information System (MAPTIS) LDEF materials data base

Science.gov (United States)

Funk, Joan G.; Strickland, John W.; Davis, John M.

1993-01-01

A preliminary Long Duration Exposure Facility (LDEF) Materials Data Base was developed by the LDEF Materials Special Investigation Group (MSIG). The LDEF Materials Data Base is envisioned to eventually contain the wide variety and vast quantity of materials data generated from LDEF. The data is searchable by optical, thermal, and mechanical properties, exposure parameters (such as atomic oxygen flux) and author(s) or principal investigator(s). Tne LDEF Materials Data Base was incorporated into the Materials and Processes Technical Information System (MAPTIS). MAPTIS is a collection of materials data which has been computerized and is available to engineers, designers, and researchers in the aerospace community involved in the design and development of spacecraft and related hardware. The LDEF Materials Data Base is described and step-by-step example searches using the data base are included. Information on how to become an authorized user of the system is included.

Deliberate opinion of the Environmental Authority on the national plan for the management of radioactive materials and wastes (2016-2018)

International Nuclear Information System (INIS)

2016-01-01

In its first part, this document presents the context of national plans for the management of radioactive materials and wastes or PNGMDR (legal general principles, modalities of elaboration, framework), the project of PNGMDR for 2016-2018, its associated procedures, and the main environmental challenges noticed by the Environmental Authority. The second part proposes an analysis of the environmental assessment and notably explains the choice of this PNGMDR in terms of objectives for the environment, and with respect to other envisaged solutions. The third part describes how the PNGMDR takes the environment into account in terms of prevention, and of transverse environmental stakes. It also proposes an analysis in terms of material type and of wastes per sector (radioactive materials, wastes of different activity levels and life, residues, wastes with high natural radioactivity, management of historical sites). Two documents published by the IRSN, respectively on the environmental assessment of the PNGMDR and on a project of storage of low level and long life wastes are provided in appendix

The rank-heat plot is a novel way to present the results from a network meta-analysis including multiple outcomes.

Science.gov (United States)

Veroniki, Areti Angeliki; Straus, Sharon E; Fyraridis, Alexandros; Tricco, Andrea C

2016-08-01

To present a novel and simple graphical approach to improve the presentation of the treatment ranking in a network meta-analysis (NMA) including multiple outcomes. NMA simultaneously compares many relevant interventions for a clinical condition from a network of trials, and allows ranking of the effectiveness and/or safety of each intervention. There are numerous ways to present the NMA results, which can challenge their interpretation by research users. The rank-heat plot is a novel graph that can be used to quickly recognize which interventions are most likely the best or worst interventions with respect to their effectiveness and/or safety for a single or multiple outcome(s) and may increase interpretability. Using empirical NMAs, we show that the need for a concise and informative presentation of results is imperative, particularly as the number of competing treatments and outcomes in an NMA increases. The rank-heat plot is an efficient way to present the results of ranking statistics, particularly when a large amount of data is available, and it is targeted to users from various backgrounds. Copyright © 2016 Elsevier Inc. All rights reserved.

Effectiveness of fenugreek as a galactagogue: A network meta-analysis.

Science.gov (United States)

Khan, Tahir Mehmood; Wu, David Bin-Chia; Dolzhenko, Anton V

2018-03-01

A systematic review and network-meta analysis (NMA) were performed to test significance of the galactagogue effect of fenugreek administrated to lactating women versus other comparators (i.e., placebo/control/other galactagogues). A pairwise comparison for the treatment effect was carried out to generate the forest plot for the NMA. League tables were generated using treatment effect, weighted mean difference (WMD; 95% confidence interval, CI) for all pairwise comparisons, where WMD > 0 favors the column-defining treatment. Five studies were identified with 122 participants receiving treatment with fenugreek. The NMA results of 4 studies indicated that consumption of fenugreek significantly increased amount of the produced breast milk [11.11, CI 95% 6.77, 15.46] versus placebo. The pairwise comparison revealed that fenugreek was effective as a galactagogue compared to placebo, control, and reference groups WMD 17.79 [CI 11.71, 23.88]. However, the effect of fenugreek was substantially inferior to Coleus amboinicus Lour and palm date. The NMA using pairwise comparison demonstrated the effect of C. amboinicus and palm date in the stimulation of the breast milk production was comparable and superior to all comparators. Copyright © 2017 John Wiley & Sons, Ltd.

The performance of fine-grained and coarse-grained elastic network models and its dependence on various factors.

Science.gov (United States)

Na, Hyuntae; Song, Guang

2015-07-01

In a recent work we developed a method for deriving accurate simplified models that capture the essentials of conventional all-atom NMA and identified two best simplified models: ssNMA and eANM, both of which have a significantly higher correlation with NMA in mean square fluctuation calculations than existing elastic network models such as ANM and ANMr2, a variant of ANM that uses the inverse of the squared separation distances as spring constants. Here, we examine closely how the performance of these elastic network models depends on various factors, namely, the presence of hydrogen atoms in the model, the quality of input structures, and the effect of crystal packing. The study reveals the strengths and limitations of these models. Our results indicate that ssNMA and eANM are the best fine-grained elastic network models but their performance is sensitive to the quality of input structures. When the quality of input structures is poor, ANMr2 is a good alternative for computing mean-square fluctuations while ANM model is a good alternative for obtaining normal modes. © 2015 Wiley Periodicals, Inc.

The role of national regulatory authority in monitoring of radioactivity and in case of seizure of radioactive or nuclear material

International Nuclear Information System (INIS)

Morkunas, G.

2002-01-01

Full text: The Radiation Protection Centre is a regulatory authority in radiation protection in Lithuania. Its main tasks are licensing of practices, supervision, control and enforcement of radiation protection requirements, dosimetric, radiometric and spectrometric measurements, evaluation of exposure and its sources, expertise and advice on optimization of radiation protection. Its activities may be divided into two main parts -- regulatory and analytical ones. Food, drinking water, environmental, wipe and other samples are monitored, the appropriate evaluation of doses is done. The data on concentrations of artificial radionuclides in different bodies are available. The laboratory is to be accredited according to the ISO 17025 standard in the framework of Phare Twinning Project. In case of seized radioactive or nuclear material the Radiation Protection Centre has to identify the necessary radiation protection means for members of public and emergency workers, perform measurements of dose rate and radioactive contamination, and, if necessary, evaluate doses received due to the seized radioactive or nuclear material. Since the Radiation Protection Centre has its departments in the largest cities of Lithuania the above mentioned measures can be taken very urgently, especially the ones connected with primary evaluation of situation and identification of optimized radiation protection measures. The Radiation Protection Centre has its own possibilities of identification of radionuclides in the seized material. Such installations as HpGe spectrometers (Oxford and Canberra), equipment for radiochemical separation of U, Pu and actinides, alpha spectrometer, liquid scintillation spectrometer and neutron rem counter are available. There were a few cases when seized material had to be analyzed also. Different sources were found in different places of Lithuania, and it was necessary to define the activity and isotopic content of these sources. The following scheme is used in

Authoring Systems Delivering Reusable Learning Objects

Directory of Open Access Journals (Sweden)

George Nicola Sammour

2009-10-01

Full Text Available A three layer e-learning course development model has been defined based on a conceptual model of learning content object. It starts by decomposing the learning content into small chunks which are initially placed in a hierarchic structure of units and blocks. The raw content components, being the atomic learning objects (ALO, were linked to the blocks and are structured in the database. We set forward a dynamic generation of LO's using re-usable e-learning raw materials or ALO’s In that view we need a LO authoring/ assembling system fitting the requirements of interoperability and reusability and starting from selecting the raw learning content from the learning materials content database. In practice authoring systems are used to develop e-learning courses. The company EDUWEST has developed an authoring system that is database based and will be SCORM compliant in the near future.

49 CFR 173.23 - Previously authorized packaging.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Previously authorized packaging. 173.23 Section... REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Preparation of Hazardous Materials for Transportation § 173.23 Previously authorized packaging. (a) When the regulations specify a packaging with a specification marking...

ASME factory authorization system and the situation in Japan

International Nuclear Information System (INIS)

Futagawa, Kiyoshi

1978-01-01

Since about three or four years ago, the enterprises of machinery, iron and steel and welding materials in Japan are paying much attention to the acquisition of ASME (American Society of Mechanical Engineers) certificates or authorization to stamp the code symbols. That is, over 70 factories in Japan have undergone ASME examination, and consequently acquired the authorization or certificates. Such authorization is divided into over 20 kinds, of which about 7 are possessed by the companies in Japan. In nuclear field, the kinds of authorization are N (nuclear vessel), NPT (nuclear vessel parts), NV (nuclear vessel safety valve), and MM (material manufacturing). In non-nuclear fields, they are S (power boilers), U (pressure vessels, in Div. 1), and U2 (pressure vessels in Div. 2). The following matters are described: ASME setup, authorization procedures of ASME for factories, the kinds of authorization, factories in Japan holding the authorization or certificates, and renewal of the authorization. (Mori, K.)

Thresholds to access the market for small-scale energy consumers

International Nuclear Information System (INIS)

Baarsma, B.; Bremer, S.; De Nooij, M.; Poort, J.

2007-10-01

Entry of and options for expansion are import aspects for a well-functioning free market. The Netherlands Competition Authority (NMa)/The Office of Energy Regulation (DTe/Energiekamer) received signals that there are barriers for entering or further growth on the small consumer market. The regulator has asked SEO Economic Research to examine which entry barriers are significant and require further monitoring. For this purpose, more than 20 interviews were held with market parties and stakeholders. [mk] [nl

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 27. 1996 edition

International Nuclear Information System (INIS)

1996-01-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 30. 1999 edition

International Nuclear Information System (INIS)

1999-02-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 31. 2000 edition

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-02-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 29. 1998 edition

International Nuclear Information System (INIS)

1998-02-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 30. 1999 edition

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-02-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 26. 1995 edition

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-01-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 29. 1998 edition

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-02-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 26. 1995 edition

International Nuclear Information System (INIS)

1995-01-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 31. 2000 edition

International Nuclear Information System (INIS)

2000-02-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

Comparison of the efficacy and safety of thrombectomy devices in acute stroke : a network meta-analysis of randomized trials.

Science.gov (United States)

Saber, Hamidreza; Rajah, Gary B; Kherallah, Riyad Y; Jadhav, Ashutosh P; Narayanan, Sandra

2017-12-15

Mechanical thrombectomy (MT) is increasingly used for large-vessel occlusions (LVO), but randomized clinical trial (RCT) level data with regard to differences in clinical outcomes of MT devices are limited. We conducted a network meta-analysis (NMA) that enables comparison of modern MT devices (Trevo, Solitaire, Aspiration) and strategies (stent retriever vs aspiration) across trials. Relevant RCTs were identified by a systematic review. The efficacy outcome was 90-day functional independence (modified Rankin Scale (mRS) score 0-2). Safety outcomes were 90-day catastrophic outcome (mRS 5-6) and symptomatic intracranial hemorrhage (sICH). Fixed-effect Bayesian NMA was performed to calculate risk estimates and the rank probabilities. In a NMA of six relevant RCTs (SWIFT, TREVO2, EXTEND-IA, SWIFT-PRIME, REVASCAT, THERAPY; total of 871 patients, 472 Solitaire vs medical-only, 108 Aspiration vs medical-only, 178 Trevo vs Merci, and 113 Solitaire vs Merci) with medical-only arm as the reference, Trevo had the greatest functional independence (OR 4.14, 95% credible interval (CrI) 1.41-11.80; top rank probability 92%) followed by Solitaire (OR 2.55, 95% CrI 1.75-3.74; top rank probability 72%). Solitaire and Aspiration devices had the greatest top rank probability with respect to low sICH and catastrophic outcomes (76% and 91%, respectively), but without significant differences between each other. In a separate network of seven RCTs (MR-CLEAN, ESCAPE, EXTEND-IA, SWIFT-PRIME, REVASCAT, THERAPY, ASTER; 1737 patients), first-line stent retriever was associated with a higher top rank probability of functional independence than aspiration (95% vs 54%), with comparable safety outcomes. These findings suggest that Trevo and Solitaire devices are associated with a greater likelihood of functional independence whereas Solitaire and Aspiration devices appear to be safer. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights

Node-making process in network meta-analysis of nonpharmacological treatment are poorly reported.

Science.gov (United States)

James, Arthur; Yavchitz, Amélie; Ravaud, Philippe; Boutron, Isabelle

2018-05-01

To identify methods to support the node-making process in network meta-analyses (NMAs) of nonpharmacological treatments. We proceeded in two stages. First, we conducted a literature review of guidelines and methodological articles about NMAs to identify methods proposed to lump interventions into nodes. Second, we conducted a systematic review of NMAs of nonpharmacological treatments to extract methods used by authors to support their node-making process. MEDLINE and Google Scholar were searched to identify articles assessing NMA guidelines or methodology intended for NMA authors. MEDLINE, CENTRAL, and EMBASE were searched to identify reports of NMAs including at least one nonpharmacological treatment. Both searches involved articles available from database inception to March 2016. From the methodological review, we identified and extracted methods proposed to lump interventions into nodes. From the systematic review, the reporting of the network was assessed as long as the method described supported the node-making process. Among the 116 articles retrieved in the literature review, 12 (10%) discussed the concept of lumping or splitting interventions in NMAs. No consensual method was identified during the methodological review, and expert consensus was the only method proposed to support the node-making process. Among 5187 references for the systematic review, we included 110 reports of NMAs published between 2007 and 2016. The nodes were described in the introduction section of 88 reports (80%), which suggested that the node content might have been a priori decided before the systematic review. Nine reports (8.1%) described a specific process or justification to build nodes for the network. Two methods were identified: (1) fit a previously published classification and (2) expert consensus. Despite the importance of NMA in the delivery of evidence when several interventions are available for a single indication, recommendations on the reporting of the node

Heterogeneous Materials I and Heterogeneous Materials II

International Nuclear Information System (INIS)

Knowles, K M

2004-01-01

In these two volumes the author provides a comprehensive survey of the various mathematically-based models used in the research literature to predict the mechanical, thermal and electrical properties of hetereogeneous materials, i.e., materials containing two or more phases such as fibre-reinforced polymers, cast iron and porous ceramic kiln furniture. Volume I covers linear properties such as linear dielectric constant, effective electrical conductivity and elastic moduli, while Volume II covers nonlinear properties, fracture and atomistic and multiscale modelling. Where appropriate, particular attention is paid to the use of fractal geometry and percolation theory in describing the structure and properties of these materials. The books are advanced level texts reflecting the research interests of the author which will be of significant interest to research scientists working at the forefront of the areas covered by the books. Others working more generally in the field of materials science interested in comparing predictions of properties with experimental results may well find the mathematical level quite daunting initially, as it is apparent that the author assumes a level of mathematics consistent with that taught in final year undergraduate and graduate theoretical physics courses. However, for such readers it is well worth persevering because of the in-depth coverage to which the various models are subjected, and also because of the extensive reference lists at the back of both volumes which direct readers to the various source references in the scientific literature. Thus, for the wider materials science scientific community the two volumes will be a valuable library resource. While I would have liked to see more comparison with experimental data on both ideal and 'real' heterogeneous materials than is provided by the author and a discussion of how to model strong nonlinear current--voltage behaviour in systems such as zinc oxide varistors, my overall

Yeast Interacting Proteins Database: YLR328W, YGR010W [Yeast Interacting Proteins Database

Lifescience Database Archive (English)

Full Text Available YLR328W NMA1 Nicotinic acid mononucleotide adenylyltransferase, involved in pathways... of NAD biosynthesis, including the de novo, NAD(+) salvage, and nicotinamide riboside salvage pathways Row... ORF YLR328W Bait gene name NMA1 Bait description Nicotinic acid mononucleotide adenylyltransferase, involved in pathways...otinamide riboside salvage pathways Rows with this bait as bait Rows with this bait as bait (2) Rows with th

Analysis of irradiated materials

International Nuclear Information System (INIS)

Bellamy, B.A.

1988-01-01

Papers presented at the UKAEA Conference on Materials Analysis by Physical Techniques (1987) covered a wide range of techniques as applied to the analysis of irradiated materials. These varied from reactor component materials, materials associated with the Authority's radwaste disposal programme, fission products and products associated with the decommissioning of nuclear reactors. An invited paper giving a very comprehensive review of Laser Ablation Microprobe Mass Spectroscopy (LAMMS) was included in the programme. (author)

Testing moderation in network meta-analysis with individual participant data.

Science.gov (United States)

Dagne, Getachew A; Brown, C Hendricks; Howe, George; Kellam, Sheppard G; Liu, Lei

2016-07-10

Meta-analytic methods for combining data from multiple intervention trials are commonly used to estimate the effectiveness of an intervention. They can also be extended to study comparative effectiveness, testing which of several alternative interventions is expected to have the strongest effect. This often requires network meta-analysis (NMA), which combines trials involving direct comparison of two interventions within the same trial and indirect comparisons across trials. In this paper, we extend existing network methods for main effects to examining moderator effects, allowing for tests of whether intervention effects vary for different populations or when employed in different contexts. In addition, we study how the use of individual participant data may increase the sensitivity of NMA for detecting moderator effects, as compared with aggregate data NMA that employs study-level effect sizes in a meta-regression framework. A new NMA diagram is proposed. We also develop a generalized multilevel model for NMA that takes into account within-trial and between-trial heterogeneity and can include participant-level covariates. Within this framework, we present definitions of homogeneity and consistency across trials. A simulation study based on this model is used to assess effects on power to detect both main and moderator effects. Results show that power to detect moderation is substantially greater when applied to individual participant data as compared with study-level effects. We illustrate the use of this method by applying it to data from a classroom-based randomized study that involved two sub-trials, each comparing interventions that were contrasted with separate control groups. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Energy Price Comparisons. Study on the quality of comparison sites for electricity and natural gas on the Internet; Energieprijsvergelijkers. Onderzoek naar de kwaliteit van vergelijkingssites voor elektriciteit en gas op het internet

Energy Technology Data Exchange (ETDEWEB)

Boezaard, P.M.; Van Liere, M.M.; Van Steenpaal, D.F.J.M.

2007-06-15

Internet sites with comparisons of prices for electricity and natural gas appear to be important tools for consumers. On a regular basis the Dutch Office of Energy Regulation (DTe) carries out a study on the quality of such price comparison sites. In this report the results of the June 2007 study are summarized. [Dutch] Voor een goedwerkende markt is een goed geinformeerde consument van belang. Uit de Consumentenmonitor, kwalitatief onderzoek dat de NMa in 2006 heeft laten uitvoeren, is gebleken dat de consument bij een overstap vaak gebruik maakt van prijsvergelijkingssites. Het belang van dergelijke sites neemt alleen maar toe. Door een grotere differentiatie aan producten en meer variatie in prijsstelling wordt een goede vergelijking van energieleveranciers voor de gemiddelde consument steeds lastiger. Ook voor de prijsvergelijkingssites neemt de complexiteit toe. De Directie Toezicht Energie (DTe) van de Nederlandse Mededingingsautoriteit (NMa) onderzoekt sinds 2004 jaarlijks de kwaliteit van (prijs)vergelijkingssites voor elektriciteit en gas. Gezien de groeiende complexiteit van de prijsvergelijkingen is het van belang dat de NMa dit onderzoek ook in 2007 uitvoert. In dit rapport worden de resultaten van dit jaar gepresenteerd. Daarnaast heeft de NMa voor het eerst een handleiding met tips voor de consument als bijlage bij dit rapport opgenomen.

Rudolf Steiner as a religious authority

Directory of Open Access Journals (Sweden)

Tore Ahlbäck

2008-01-01

Full Text Available The aim of this article is to clarify what Rudolf Steiner’s followers thought of him at the time of his demise. How can we explain the rapid spread of the Anthroposophical Society in Europe and the United States during the inter-war period? Can it be explained by referring to Rudolf Steiner’s own authority? What kind of authority did he possess? Did the members of the Anthroposophical Society regard him as a divine being, a prophet, or an ordinary religious teacher? The material for this article consists of a selection of the obitu­aries published in the anthroposophical press after Rudolf Steiner’s death on 30 March 1925. Needless to say, obituaries are usually tendentious, and therefore controversial as source material. For the purpose of the present article, however, this kind of material is suitable, since the aim here is to study the tendency itself. The restraint that followers might be assumed to practice in publishing their opinion on Steiner in commonly available writings is minimised in the type of material chosen here. The primary interest is to find out whether his followers portray Steiner as a human being, or as a divine, or semi-divine being.

The Lure of Authority: Motivation and Incentive Effects of Power

OpenAIRE

Fehr, Ernst; Herz, Holger; Wilkening, Tom

2012-01-01

Authority and power permeate political, social, and economic life, but empirical knowledge about the motivational origins and consequences of authority is limited. We study the motivation and incentive effects of authority experimentally in an authority delegation game. Individuals often retain authority even when its delegation is in their material interest—suggesting that authority has nonpecuniary consequences for utility. Authority also leads to over provision of effort by the controlling...

Smuggling special nuclear materials

International Nuclear Information System (INIS)

Lazaroiu, Gheorghe

1999-01-01

Ever since the collapse of the former Soviet Union reports have circulated with increasing frequency concerning attempts to smuggle materials from that country's civil and military nuclear programs. Such an increase obviously raises a number of concerns (outlined in the author's introduction), chief among which is the possibility that these materials might eventually fall into the hands of proliferant states or terrorist groups. The following issues are presented: significance of materials being smuggled; sources and smuggling routes; potential customers; international efforts to reduce nuclear smuggling; long-term disposition of fissile materials. (author)

49 CFR 173.418 - Authorized packages-pyrophoric Class 7 (radioactive) materials.

Science.gov (United States)

2010-10-01

... must not be fissile unless excepted by § 173.453; (b) Contained in sealed and corrosion resistant receptacles with positive closures (friction or slip-fit covers or stoppers are not authorized); (c) Free of...

Thermodynamic properties of LiCl solutions in N-methylacetamide at 308.15-328.15 K

Science.gov (United States)

Manin, N. G.; Kolker, A. M.

2017-12-01

Enthalpies of dissolution of crystalline LiCl and enthalpies of dilution of LiCl solutions in N-methylacetamide (NMA) with electrolyte concentrations no greater than 0.32 m are measured on an isoperibolic calorimeter at 308.15, 318.15, and 328.5 K. Standard enthalpies of the dissolution of LiCl in NMA are calculated at different temperatures. The thermodynamic properties of the solution and its components are calculated and analyzed in the investigated range of concentrations and temperatures.

BRONZ KATKILI POLİ-TETRA-FLOR-ETİLEN (PTFE) KOMPOZİTLERİN PASLANMAZ ÇELİK MALZEMEYE KARŞI AŞINMA VE SÜRTÜNME DAVRANIŞLARI

OpenAIRE

Ünal, Hüseyin; Yetkin, Salih Hakan; Poyraz, Bayram

2018-01-01

Bu deneysel çalışmada, katkısızpoli-tetra-flor-etilen (PTFE) polimeri ile %25 bronz katkılı PTFE kompoziti ve%40 bronz katkılı PTFE kompozitlerin, kuru kayma şartları altında paslanmazçelik malzemeye karşı tribolojik performansları incelenmiştir. Tribolojiktestler, pim-disk aşınma cihazında ve oda sıcaklığında gerçekleştirilmiştir.Aşınma ve sürtünme testleri, 50N, 100N ve 150N yüklerde ve 1.0, 1.5 ve 2.0m/skayma hızlarında yapılmıştır. Aşınma test sonuçlarına göre, %40 bronz katkılıPTFE kompo...

Focal and optional ergative marking in Warrwa (Kimberley, Western Australia)

DEFF Research Database (Denmark)

McGregor, William

2006-01-01

Warrwa is a morphologically ergative language with three ergative markers, -na, -ma, and-nma. Intriguingly, while -ma is almost in complementary distribution with both -na and -nma, the latter pair are in "free variation'', and either can replace the other anywhere. When it is used, however, -nma...... accords prominence to an Agent (i.e. transitive subject), singling it out asboth unexpected and highly agentive; accordingly it can be considered to be a focal ergative marker.By contrast, -na is an ordinary ergative marker, with no pragmatic components to its meaning; the situation for -ma is uncertain....... The story is complicated further by the fact that ergative markers are occasionally omitted from Agent NPs. This ‘"optional'' ergative marking is not random: it defocusses the Agent, indicating that it is both expected and low in agentivity. Much of the paper is taken up by presentation of evidence for...

WEBnm@ v2.0: Web server and services for comparing protein flexibility.

Science.gov (United States)

Tiwari, Sandhya P; Fuglebakk, Edvin; Hollup, Siv M; Skjærven, Lars; Cragnolini, Tristan; Grindhaug, Svenn H; Tekle, Kidane M; Reuter, Nathalie

2014-12-30

Normal mode analysis (NMA) using elastic network models is a reliable and cost-effective computational method to characterise protein flexibility and by extension, their dynamics. Further insight into the dynamics-function relationship can be gained by comparing protein motions between protein homologs and functional classifications. This can be achieved by comparing normal modes obtained from sets of evolutionary related proteins. We have developed an automated tool for comparative NMA of a set of pre-aligned protein structures. The user can submit a sequence alignment in the FASTA format and the corresponding coordinate files in the Protein Data Bank (PDB) format. The computed normalised squared atomic fluctuations and atomic deformation energies of the submitted structures can be easily compared on graphs provided by the web user interface. The web server provides pairwise comparison of the dynamics of all proteins included in the submitted set using two measures: the Root Mean Squared Inner Product and the Bhattacharyya Coefficient. The Comparative Analysis has been implemented on our web server for NMA, WEBnm@, which also provides recently upgraded functionality for NMA of single protein structures. This includes new visualisations of protein motion, visualisation of inter-residue correlations and the analysis of conformational change using the overlap analysis. In addition, programmatic access to WEBnm@ is now available through a SOAP-based web service. Webnm@ is available at http://apps.cbu.uib.no/webnma . WEBnm@ v2.0 is an online tool offering unique capability for comparative NMA on multiple protein structures. Along with a convenient web interface, powerful computing resources, and several methods for mode analyses, WEBnm@ facilitates the assessment of protein flexibility within protein families and superfamilies. These analyses can give a good view of how the structures move and how the flexibility is conserved over the different structures.

A coarse-grained elastic network atom contact model and its use in the simulation of protein dynamics and the prediction of the effect of mutations.

Directory of Open Access Journals (Sweden)

Vincent Frappier

2014-04-01

Full Text Available Normal mode analysis (NMA methods are widely used to study dynamic aspects of protein structures. Two critical components of NMA methods are coarse-graining in the level of simplification used to represent protein structures and the choice of potential energy functional form. There is a trade-off between speed and accuracy in different choices. In one extreme one finds accurate but slow molecular-dynamics based methods with all-atom representations and detailed atom potentials. On the other extreme, fast elastic network model (ENM methods with Cα-only representations and simplified potentials that based on geometry alone, thus oblivious to protein sequence. Here we present ENCoM, an Elastic Network Contact Model that employs a potential energy function that includes a pairwise atom-type non-bonded interaction term and thus makes it possible to consider the effect of the specific nature of amino-acids on dynamics within the context of NMA. ENCoM is as fast as existing ENM methods and outperforms such methods in the generation of conformational ensembles. Here we introduce a new application for NMA methods with the use of ENCoM in the prediction of the effect of mutations on protein stability. While existing methods are based on machine learning or enthalpic considerations, the use of ENCoM, based on vibrational normal modes, is based on entropic considerations. This represents a novel area of application for NMA methods and a novel approach for the prediction of the effect of mutations. We compare ENCoM to a large number of methods in terms of accuracy and self-consistency. We show that the accuracy of ENCoM is comparable to that of the best existing methods. We show that existing methods are biased towards the prediction of destabilizing mutations and that ENCoM is less biased at predicting stabilizing mutations.

Genetic rhetoric: Science, authority, and genes

Science.gov (United States)

Shea, Elizabeth Parthenia

This dissertation is an analysis of how the cultural authority of genetics works through language. An analysis of the rhetorical construction of knowledge and authority in cultural contexts, the study is intended to contribute to a larger discussion aimed at keeping the intersections of science and culture within the realm of rhetoric, that is within the realm of communication and dialogue. Of special concern is the influence of genetic rhetoric on the cultural momentum of biological determinism to explain away social organization, class inequalities, racial differences, gender differences, and stigmatized behaviors by rooting them in the construct of the biological individual. This study separates questions of legitimacy from questions of authority and focuses on the way that authority of genetics works through language. With authority defined as the function of resisting challenges to legitimacy and/or power, the study consists of three parts. First, a historical analysis of the terms science, genetics, and gene, shows how these words came to refer not only to areas and objects of study but also to sources of epistemological legitimacy outside culture and language. The relationships between these words and their referents are examined in socio-historical context to illustrate how the function of signaling authority was inscribed in the literal definition of these terms. Second, introductory chapters of contemporary Genetics textbooks are examined. In these texts the foundations of legitimacy associated with genetics and science are maintained as the authors articulate idealized views of science and genetics in relation to society. Finally, articles in the popular press reporting on and discussing recent research correlating genetics and homosexuality are examined. The popular press reports of "gay gene" research serve as textual examples of figurative representations of genetics concepts shaping discourse about social issues. I argue that the cultural authority

Consejo de Seguridad Nuclear: the Spanish safety authority

International Nuclear Information System (INIS)

Gonzalez, E.

1993-01-01

The Spanish Authority in Nuclear Safety and Radiological Protection was created by special law in 1981. The Consejo de Seguridad Nuclear (CNS) was established independent of the Government and reporting direct to Congress. This five-member commission is responsible for assisting the Government and other institutions in safety matters, with the the authority to impose safety conditions on all activities related to radioactive materials, and particularly on the nuclear power plants. (author) 1 fig

18 CFR 3a.12 - Authority to classify official information.

Science.gov (United States)

2010-04-01

... efficient administration. (b) The authority to classify information or material originally as Top Secret is... classify information or material originally as Secret is exercised only by: (1) Officials who have Top... information or material originally as Confidential is exercised by officials who have Top Secret or Secret...

Emerging Materiality

DEFF Research Database (Denmark)

Bertelsen, Olav Wedege; Breinbjerg, Morten; Pold, Søren

2009-01-01

The authors examine how materiality emerges from complex chains of mediation in creative software use. The primarily theoretical argument is inspired and illustrated by interviews with two composers of electronic music. The authors argue that computer mediated activity should not primarily be und...

Carbono orgânico e Nitrogênio em agregados de um Latossolo Vermelho distrófico sob duas coberturas vegetais Organic carbon and Nitrogen in aggregates of a Dystrophic Red Latosol under two vegetation covers

Directory of Open Access Journals (Sweden)

Renato Ribeiro Passos

2007-10-01

Full Text Available A matéria orgânica do solo apresenta constituição variada, incluindo desde frações ativas a mais estáveis, com diferentes taxas de ciclagem. Práticas de manejo alteram os teores de carbono orgânico e N, a qualidade da matéria orgânica e a agregação dos solos. Este trabalho foi realizado com o objetivo de caracterizar o carbono orgânico e o N em agregados de um Latossolo Vermelho distrófico de Minas Gerais sob vegetação natural de Cerradão e sob cultivo com milho durante 30 anos. Para isso, retiraram-se amostras do solo em quatro pontos diferentes nas profundidades de 5-10 e 15-20 cm, que foram fracionadas, por via seca, nas classes de agregados de: 4,75-2,0; 2,0-1,0; 1,0-0,5; 0,5-0,25; 0,25-0,105; e Soil organic matter is constituted by a vast array of compounds that include active and more stable fractions, with different cycling rates. Management practices affect organic carbon and nitrogen contents, organic matter quality, and soil aggregation. The present study aimed to characterize organic carbon and nitrogen in aggregates of a Dystrophic Red Latosol of Minas Gerais State, Brazil, in an area of native vegetation (Cerradão and another one that has been for 30 years under conventional corn cultivation. Soil samples were collected at depths of 5-10 and 15-20 cm at four different sites. The dried samples were fractioned in the following aggregate classes: diameter 4.75-2.0; 2.0-1.0; 1.0-0.5; 0.5-0.25; 0.25-0.105; and less than 0.105 mm. Total organic carbon (COT, water soluble organic carbon (COS, total nitrogen (NT and anaerobically-mineralized nitrogen (NMA were determined for each sample. On average, the COT contents of soil aggregates under conventional tillage were higher, while NT contents were greater in the aggregates of the Cerradão surface layer. The COS and NMA contents, that correspond to more active fractions of organic matter, were significantly higher in aggregates of Cerradão soil. Aggregates of smaller size

Instruction of 7 september 1989 on measures to be taken by the public authorities in case of an accident during the maritime transport of radioactive materials (Nucmar Plan)

International Nuclear Information System (INIS)

1989-09-01

This Instruction of the Prime Minister called Plan Nucmar, defines the general principles for the organisation of measures to be taken by the authorities in case of an accident occurring during a civilian maritime transport of radioactive materials entailing or possibly entailing damage which would affect the health of man or the marine environment. The Plan applies to any accident occurring within French territorial waters and beyond them when the coast and related interests are endangered and concerns the transport of Class 7 materials (radioactive materials with a specific activity exceeding 70 Bq/kg) under the International Maritime Dangerous Goods Code [fr

Materials risk analysis.

Science.gov (United States)

2010-02-01

State highway authorities routinely examine the quality of the materials used to build highway construction projects. Some : materials are tested, some are accepted through a manufacturers certification of quality or compliance, some are physicall...

Neutron shielding material

International Nuclear Information System (INIS)

Nodaka, M.; Iida, T.; Taniuchi, H.; Yosimura, K.; Nagahama, H.

1993-01-01

From among the neutron shielding materials of the 'kobesh' series developed by Kobe Steel, Ltd. for transport and storage packagings, silicon rubber base type material has been tested for several items with a view to practical application and official authorization, and in order to determine its adaptability to actual vessels. Silicon rubber base type 'kobesh SR-T01' is a material in which, from among the silicone rubber based neutron shielding materials, the hydrogen content is highest and the boron content is most optimized. Its neutron shielding capability has been already described in the previous report (Taniuchi, 1986). The following tests were carried out to determine suitability for practical application; 1) Long-term thermal stability test 2) Pouring test on an actual-scale model 3) Fire test The experimental results showed that the silicone rubber based neutron shielding material has good neutron shielding capability and high long-term fire resistance, and that it can be applied to the advanced transport packaging. (author)

75 FR 39664 - Grant of Authority For Subzone Status Materials Science Technology, Inc. (Specialty Elastomers...

Science.gov (United States)

2010-07-12

... Status Materials Science Technology, Inc. (Specialty Elastomers and Fire Retardant Chemicals) Conroe... specialty elastomer manufacturing and distribution facility of Materials Science Technology, Inc., located... and distribution of specialty elastomers and fire retardant chemicals at the facility of Materials...

Security of material: Preventing criminal activities involving nuclear and other radioactive materials

International Nuclear Information System (INIS)

Nilsson, A.

2001-01-01

The report emphasizes the need for national regulatory authorities to include in the regulatory systems, measures to control and protect nuclear materials from being used in illegal activities, as well as aspects of relevance for detecting and responding to illegal activities involving nuclear and other radioactive materials. The report will give an overview of the international treaties and agreements that underpin the establishment of a regulatory structure necessary for States to meet their non-proliferation policy and undertakings. Ongoing work to strengthen the protection of nuclear material and to detect and respond to illegal activities involving nuclear and other radioactive material will be included. The focus of the paper is on the need for standards and national regulation in the nuclear security area. (author)

Pressure effect on the amide I frequency of the solvated α-helical structure in water

International Nuclear Information System (INIS)

Takekiyo, T; Yoshimura, Y; Shimizu, A; Koizumi, T; Kato, M; Taniguchi, Y

2007-01-01

As a model system of the pressure dependence of the amide I mode of the solvated α-helical structure in a helical peptide, we have calculated the frequency shifts of the amide I modes as a function of the distance between trans-N-methylacetamide (t-NMA) dimer and a water molecule (d C=O···H-O ) by the density-functional theory (DFT) method at the B3LYP/6-31G++(d,p) level. Two amide I frequencies at 1652 and 1700 cm -1 were observed under this calculation. The former is ascribed to the amide I mode forming the intermolecular hydrogen bond (H-bond) between t-NMA and H 2 O in addition to the intermolecular H-bond in the t-NMA dimer. The latter is due to the amide I mode forming only the intermolecular H-bond in the t-NMA dimer. We have found that the amide I frequency at 1652 cm -1 shifts to a lower frequency with decreasing d C=O···H-O ) (i.e., increasing pressure), whereas that at 1700 cm -1 shifts to a higher frequency. The amide I frequency shift of 1652 cm -1 is larger than that of 1700 cm -1 by the intermolecular H-bond. Thus, our results clearly indicate that the pressure-induced amide I frequency shift of the solvated α-helical structure correlates with the change in d C=O···H-O )

Beyond Author-Centricity in Scholarly Editing

Directory of Open Access Journals (Sweden)

Hans Walter Gabler

2012-03-01

Full Text Available Authorship – authority – authorisation – the author – the author’s will – the author’s intention: these form a cluster of notions whose validity for scholarly editing I fundamentally question. Taking measure from a historical survey of the discipline’s principles and practice from their institution under the dominance of stemmatics up to their main present-day ‘author orientation’ (Shillingsburg 1996, I see the need to split the terms ‘author’ and ‘authorship’ into a pragmatic versus a conceptual aspect. What textual scholarship engages with, directly and tangibly, is not authors but texts (and equally not works but texts, materially inscribed in transmissions. In the materiality and artifice of texts, ‘authoriality’ is accessible conceptually only, in a manner analog-ous to the Foucauldian ‘author function’. Under such premises, as well, ‘authority’, ‘authorisation’ and ‘authorial intention’ become recognisable as exogenous to texts, not integral to them. Consequently, I propose to abandon ‘authority’, ‘authorisation’ and ‘authorial intention’ as overriding principles and arbiters in editorial scholarship. Scholarly editing instead should re-situate itself in relation to texts, to textual criticism, to literary criticism and to literary theory alike, and do so by re-focussing the method-ology of its own practice. It should relinquish the external props termed ‘authorised document’, ‘textual authority’, or ‘authorial intention’ hitherto deferred to. Instead, it should revitalise skills fundamental to inherited editorial scholarship, namely those of critically assessing, and of editorially realising, textual validity. To re-embed editorial scholarship in literary criticism and theory, moreover, the interpretative and hermeneutic dimensions of textual criticism and scholarly editing will need to be freshly mapped.

University of Maryland annual progress report

International Nuclear Information System (INIS)

Mignerey, A.C.

1995-02-01

The two main areas of research of intermediate energy heavy-ion reactions and ultrarelativistic heavy-ion reactions are presented in this report. Among the intermediate energy research topics were 129 Xe reactions, calibration of the plastic elements in the Maryland Forward Array, and a cluster recognition model for treating BUU-generated distributions. The ultrarelativistic energy research program included the LED system for the NMA (New Multiplicity Array) in E866 at BNL AGS, the E866 collaboration (antiprotons and NMA), and PHOBOS magnet work. 139 La reactions were also studied

University of Maryland annual progress report

Energy Technology Data Exchange (ETDEWEB)

Mignerey, A.C.

1995-02-01

The two main areas of research of intermediate energy heavy-ion reactions and ultrarelativistic heavy-ion reactions are presented in this report. Among the intermediate energy research topics were {sup 129}Xe reactions, calibration of the plastic elements in the Maryland Forward Array, and a cluster recognition model for treating BUU-generated distributions. The ultrarelativistic energy research program included the LED system for the NMA (New Multiplicity Array) in E866 at BNL AGS, the E866 collaboration (antiprotons and NMA), and PHOBOS magnet work. {sup 139}La reactions were also studied.

Author's capabilities in author indexing

International Nuclear Information System (INIS)

Ooi, Shoichi

1988-01-01

The purpose of this paper is to provide a author capability of current author indexing practices in journal literature indexing practices in 'Journal of Nuclear Science and Technology of Japan'. This Journal employed keywords freely assigned by author and not taken from INIS Thesaurus or other vocabulary list. Author examined 413 literatures, comparing keywords assigned by the literatures' authors with descriptor's (ATOMINDEX) assigned by an experienced professional indexer. The results of the comparisons showed that the average set of terms assigned by author included about 70% of all the terms assigned to the same literature by the professional indexer. Authors eventually would contribute, for the most effective point to create reference to information is at the time of its generation. Consequently, it may be possible to transfer them easily to descriptors in every secondary information system. (author)

Recommendations for a coordinated approach to regulating the uranium recovery industry

International Nuclear Information System (INIS)

Sweeney, K.; Thompson, A.J.; Lehrenbaum, W.U.; Gormley, P.; Kim, D.H.

2001-01-01

about the effectiveness of the current regulatory system at controlling uranium mill tailings and related wastes in a manner that optimizes protection of public health, safety and the environment. In addition, the patchwork of sometimes outdated and sometimes erroneous policies and positions that have been developed over the past 20 years has led to increasing confusion within the uranium recovery industry, which has been exacerbated by the inconsistent and sometimes ill - considered manner in which NRC staff have, in some of their policies and positions, deviated from the definitions of key terms set out in the statute and the relevant regulations. These terms, particularly 'source material' and 'byproduct material', have jurisdictional significance for NRC and for uranium recovery licensees. While the Commission certainly has flexibility in interpreting these statutory terms, it must do so in a way that is carefully thought out and legally supportable, and in a way that does not jeopardize the consistent implementation of the overall regulatory programme created in the AEA, as amended by UMTRCA. In this White Paper, NMA examines several of the more important policies and positions that have been adopted by NRC staff over the past two decades pertaining to uranium recovery activities. Through this examination, NMA hopes to provide the Commission with a fresh perspective on the implications that these staff policies and positions carry for regulatory policy under the AEA in general, and for the uranium recovery industry in particular. The White Paper focuses on staff policies and positions in the following areas: (i) the concurrent jurisdiction of non-Agreement states to regulate non-radiological aspects of 11e.(2) byproduct material; (ii) NRC's jurisdiction over in-situ leach (ISL) uranium recovery facilities; (iii) the disposal of non-11e.(2) byproduct material in uranium mill tailings piles; and (iv) NRC's alternate feed policy. It is NMA's hope that the fresh

75 FR 27185 - Revisions to the Authorization for Validated End-User Applied Materials China, Ltd.

Science.gov (United States)

2010-05-14

... Service Center, No. 1 North Di Sheng Street, BDA, Beijing, China 100176. Applied Materials South East Asia..., Shanghai, China 201203. Applied Materials (China), Inc.--Beijing Depot, No. 1 North Di Sheng Street, BDA... Di Sheng Street, BDA Beijing, China 100176. Applied Materials South East Asia Pte. Ltd.-- Wuxi Depot...

Analgesic efficacy of tramadol in cats with naturally occurring osteoarthritis.

Directory of Open Access Journals (Sweden)

Beatriz P Monteiro

Full Text Available This study aimed to (1 compare outcome assessments in normal and osteoarthritic cats and (2 evaluate the analgesic efficacy of tramadol in feline osteoarthritis (OA, in a prospective, randomised, blinded, placebo-controlled, crossover design.Twenty cats were included after clinical examination, blood work and full body radiographs were performed. In Phase 1, outcome assessments aimed to differentiate normal (n = 5; i.e. exempt of any radiographic and clinical sign of OA from OA (n = 15 cats. In Phase 2, OA cats were treated twice daily with a placebo (PG: cornstarch 15 mg or tramadol (TG: 3 mg/kg orally for 19 days, with a 3-month washout period between treatments. Evaluations were performed in normal and OA cats at baseline and consisted of: 1 peak vertical force (PVF after staircase exercise; 2 telemetered night-time motor activity (NMA; and 3 response to mechanical temporal summation (RMTS. After treatment, PVF, NMA and RMTS evaluations were repeated in OA cats. Data were analysed with mixed model methods with an alpha-threshold of 5%.Phase 1: 1 PVF (% of body weight; mean ± SD was higher in normal (59 ± 10.5 than in OA cats (50.6 ± 5.7 (p = 0.005; 2 NMA (no unit was not different between groups; 3 RMTS (number of stimuli; median (range was higher in normal [29.5 (23.5-30] than in OA cats [14 (8.5-28] (p < 0.0001. Phase 2: PVF, NMA and RMTS presented a treatment effect (p = 0.024, p = 0.008 and p = 0.018, respectively. No clinically important adverse-effects were observed.Outcome assessments such as kinetics (PVF and evaluation of central sensitisation (RMTS are discriminant of OA status. Mobility measured by NMA was not discriminant of OA status, however it increased in OA cats with tramadol treatment. Nociceptive hypersensitivity quantified by RMTS was evident in OA cats and was responsive to tramadol treatment.

Structure and experiences of the Australian National Authority

International Nuclear Information System (INIS)

Bett, F.L.

1989-01-01

A detailed account is given of the history, structure and functions of the Australian Safeguards Office (ASO). Its nuclear materials accounting and control procedures and its research and development programs are discussed. Australia's physical protection policy and the ASO's role in this field are described. The Australian views on State Systems of Accounting for and Control of Nuclear Materials and the establishment of National Authorities such as the ASO are outlined

Materials Chemistry

CERN Document Server

Fahlman, Bradley D

2011-01-01

The 2nd edition of Materials Chemistry builds on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field. The 2nd edition continues to offer innovative coverage and practical perspective throughout. After briefly defining materials chemistry and its history, seven chapters discuss solid-state chemistry, metals, semiconducting materials, organic "soft" materials, nanomaterials, and materials characterization. All chapters have been thoroughly updated and expanded with, for example, new sections on ‘soft lithographic’ patterning, ‘click chemistry’ polymerization, nanotoxicity, graphene, as well as many biomaterials applications. The polymer and ‘soft’ materials chapter represents the largest expansion for the 2nd edition. Each ch...

NBS SRM 1569 Brewer's Yeast: Is it an adequate standard reference material for testing a chromium determination in biological materials tion in biological materials

International Nuclear Information System (INIS)

Goeij, J.J.M. de; Volkers, K.J.; Tjioe, P.S.; Kroon, J.J.

1978-01-01

Some analytical experiences with NBS SRM 1569 Brewer's Yeast are presented. Against this background the adequacy of this standard reference material for the determination of chromium in biological materials is discussed. Authors have three main objections. Due to its high content of insoluble chromium-containing particles, SRM 1569 is not typical for biological materials, possibly not even for Brewer's Yeast. The chromium level of SRM 1569 is not typical for the chromium levels normally encountered in pure biological materials. The major fraction (69 +- 3 percent) of the chromium is present in a form which is insoluble under the conditions used in Author's analysis. (T.I.)

ORCID: Author Identifiers for Librarians

Directory of Open Access Journals (Sweden)

Robyn B. Reed

2017-10-01

Full Text Available Generating accurate publication lists by researchers can be challenging when faced with scholars who have common names or who have published under name variations. This article describes ORCID and the goal of generating author identifiers for scholars to connect their research outputs. Included are the reasons for having author identifiers as well as the types of information within individual profiles. This article includes information on how academic libraries are playing a role with ORCID initiatives as well as describing how publishers, institutions, and funders are employing ORCID in their workflows. Highlighted is material on academic institutions in Pennsylvania using ORCID. The purpose of the article is to provide an overview of ORCID and its uses to inform librarians about this important initiative.

BOOK REVIEW: Heterogeneous Materials I and Heterogeneous Materials II

Science.gov (United States)

Knowles, K. M.

2004-02-01

In these two volumes the author provides a comprehensive survey of the various mathematically-based models used in the research literature to predict the mechanical, thermal and electrical properties of hetereogeneous materials, i.e., materials containing two or more phases such as fibre-reinforced polymers, cast iron and porous ceramic kiln furniture. Volume I covers linear properties such as linear dielectric constant, effective electrical conductivity and elastic moduli, while Volume II covers nonlinear properties, fracture and atomistic and multiscale modelling. Where appropriate, particular attention is paid to the use of fractal geometry and percolation theory in describing the structure and properties of these materials. The books are advanced level texts reflecting the research interests of the author which will be of significant interest to research scientists working at the forefront of the areas covered by the books. Others working more generally in the field\

NLM Evidence-based Information At Your Fingertips - NMA

Energy Technology Data Exchange (ETDEWEB)

McMurray, L.

2010-08-02

The National Library of Medicine: Evidenced-Based Information at Your Fingertips workshop is designed specifically for physicians attending the Community Medicine and Public Health Section portion of the National Medical Association 2010 Annual Convention and Scientific Assembly. This course seeks to address the digital divide issue by teaching participants to use the NLM resources and to improve their ability to use health information echnology to treat their patients and develop strategies to eliminate race-based disparities in health.

Spectral response of crystalline acetanilide and N -methylacetamide: Vibrational self-trapping in hydrogen-bonded crystals

Science.gov (United States)

Edler, Julian; Hamm, Peter

2004-06-01

Femtosecond pump-probe and Fourier transform infrared spectroscopy is applied to compare the spectral response of the amide I band and the NH-stretching band of acetanilide (ACN) and N -methylacetamide (NMA), as well as their deuterated derivatives. Both molecules form hydrogen-bonded molecular crystals that are regarded to be model systems for polypeptides and proteins. The amide I bands of both ACN and NMA show a temperature-dependent sideband, while the NH bands are accompanied by a sequence of equidistantly spaced satellite peaks. These spectral anomalies are interpreted as a signature of vibrational self-trapping. Two different types of states can be identified in both crystals in the pump-probe signal: a delocalized free-exciton state and a set of localized self-trapped states. The phonons that mediate self-trapping in ACN and deuterated ACN are identified by their temperature dependence, confirming our previous results. The study shows that the substructure of the NH band in NMA (amide A and amide B bands) originates, at least partly, from vibrational self-trapping and not, as often assumed, from a Fermi resonance.

Author Neomythonyms and Mythappellatives

OpenAIRE

Vlada V. Belousova

2017-01-01

It has been carried out an analysis of the author neomythonyms ans mythappelatives. It is given examples of Russian and foreign onyms and appellatives and also enumerated some mythonyms in literature of the 20th century. The material for this work are fiction genres, namely: novel by D.A. Emets “Methodius Buslaev. Magician of the midnight”, novel by S. Antonov “Dark tunnels”, novel by A.D. Glukhovsky “Metro 2033” and a collection of Max Frei “Russian foreign fairy tale – 1”. Language units we...

The safe transport of radioactive material in South Africa

International Nuclear Information System (INIS)

Jutle, K.K.

1997-01-01

An overview is presented of the activities related to the transport of radioactive material in South Africa. In particular, the applicable legislation, the scope of authority and regulatory functions of the Competent Authority are discussed. The categories of radioactive materials transported and the packaging requirements for the safe transport of these radioactive materials are also described. (Author)

The safe transport of radioactive material in South Africa

International Nuclear Information System (INIS)

Jutle, K.K.

2000-01-01

An overview is presented of the activities related to the transport of radioactive material in South Africa. In particular, the applicable legislation, the scope of authority and the regulatory functions of the Competent Authority are discussed. The categories of radioactive materials transported and the packaging requirements for the safe transport of these radioactive materials are also described. (author)

Transport of radioactive material in Bangladesh: a regulatory perspective

International Nuclear Information System (INIS)

Mollah, A.S.

2004-01-01

Radioactive material is transported in Bangladesh in various types of packages and by different modes of transport. The transport of radioactive materials involves a risk both for the workers and members of the public. The safe transport of radioactive material is ensured in Bangladesh by compliance with Nuclear Safety and Radiation Control (NSRC) Act-93 and NSRC Rules-97. The Bangladesh Atomic Energy Commission (BAEC) is the competent authority for the enforcement of the NSRC act and rules. The competent authority has established regulatory control at each stage to ensure radiation safety to transport workers, members of general public and the environment. An overview is presented of the activities related to the transport of radioactive material in Bangladesh. In particular, the applicable legislation, the scope of authority and the regulatory functions of the competent authority are discussed. The categories of radioactive materials transported and the packaging requirements for the safe transport of these radioactive materials are also described. (author)

Auditors of safety in hazardous materials transportation

International Nuclear Information System (INIS)

Manas Lahoz, J.L.

1993-01-01

The author describes the methodology for safety auditory and control, prevention, risks of hazardous materials transport through ship, airplane, rail, etc. In this way, The author presents the classification of damage materials transport, characteristic damage and different transport methods

Testing moderation in network meta-analysis with individual participant data

Science.gov (United States)

Dagne, Getachew A.; Brown, C. Hendricks; Howe, George; Kellam, Sheppard G.; Liu, Lei

2016-01-01

Summary Meta-analytic methods for combining data from multiple intervention trials are commonly used to estimate the effectiveness of an intervention. They can also be extended to study comparative effectiveness, testing which of several alternative interventions is expected to have the strongest effect. This often requires network meta-analysis (NMA), which combines trials involving direct comparison of two interventions within the same trial and indirect comparisons across trials. In this paper, we extend existing network methods for main effects to examining moderator effects, allowing for tests of whether intervention effects vary for different populations or when employed in different contexts. In addition, we study how the use of individual participant data (IPD) may increase the sensitivity of NMA for detecting moderator effects, as compared to aggregate data NMA that employs study-level effect sizes in a meta-regression framework. A new network meta-analysis diagram is proposed. We also develop a generalized multilevel model for NMA that takes into account within- and between-trial heterogeneity, and can include participant-level covariates. Within this framework we present definitions of homogeneity and consistency across trials. A simulation study based on this model is used to assess effects on power to detect both main and moderator effects. Results show that power to detect moderation is substantially greater when applied to IPD as compared to study-level effects. We illustrate the use of this method by applying it to data from a classroom-based randomized study that involved two sub-trials, each comparing interventions that were contrasted with separate control groups. PMID:26841367

Author Neomythonyms and Mythappellatives

Directory of Open Access Journals (Sweden)

Vlada V. Belousova

2017-03-01

Full Text Available It has been carried out an analysis of the author neomythonyms ans mythappelatives. It is given examples of Russian and foreign onyms and appellatives and also enumerated some mythonyms in literature of the 20th century. The material for this work are fiction genres, namely: novel by D.A. Emets “Methodius Buslaev. Magician of the midnight”, novel by S. Antonov “Dark tunnels”, novel by A.D. Glukhovsky “Metro 2033” and a collection of Max Frei “Russian foreign fairy tale – 1”. Language units were selected by continuous sampling. The paper also considers such notions as neologisms, potebtial words and occasionalisms. Differences between neomythonyms and author neomythonyms, as well as between appellatives and mythappelatives are distinguished. The language of national fantasy and science fiction of 2021 centuries is marked by the criteria for determining author neomythonyms and mythappelatives: by the method of formation and functioning. According to the analysis of new lexical units it has been found an active expand of the vocabulary of the Russian language due to the appearance of new and onyms and appellatives that went beyond the occasional units and are widely used among fans of fantasy and science fiction. The emergence of such a large number of author units is due to the great creative potential of contemporary writers, and the active development of Russian science fiction and fantasy of 20-21 centuries.

Ocean Disposal of Dredged Material

Science.gov (United States)

Permits and authorizations for the ocean dumping of dredged material is issued by U.S. Army Corps of Engineers. Information is provided about where to dispose dredged material and the process for obtaining an ocean dumping permit for dredged material.

77 FR 49167 - Hazardous Materials: Harmonization with International Standards (RRR)

Science.gov (United States)

2012-08-15

..., but are not limited to, the authorization to allow wood as a material of package construction for... to the regulated community with respect to the material of construction authorized for such packages... amendments include, but are not limited to, the authorization to use wood as a material of package...

Exclusion and authorization

International Nuclear Information System (INIS)

Cooper, J.R.

2003-01-01

'Everyone in the world is exposed to radiation from natural and artificial sources. Any realistic system of radiological protection must have a clearly defined scope if it is not to apply to the whole of mankind's activities'. This quote, from ICRP Publication 60 (ICRP, 1991), remains apposite. The main tool for defining scope is the concept of exclusion: situations, sources or exposures that are excluded from the system of radiological protection are, to all intents and purposes, ignored. Sources and exposures that are not excluded are within the scope of the system of protection and by inference within regulatory systems implementing ICRP recommendations. These sources and exposures should be subject to appropriate authorization by the relevant regulatory authority. In order to avoid excessive regulatory procedures, however, provisions should be made for granting an exemption in cases where it is clear that regulatory provisions are unnecessary. Exemption is a regulatory tool intended to facilitate efficient use of regulatory resources. Nevertheless, the regulatory act of granting exemptions is, in itself, a form of authorization and the material or situation so exempted remains within the regulatory system. This distinction between exclusion and exemption is an important one. Historically, the concept of exclusion has been applied to sources or exposures that are essentially unamenable to control because of their widespread nature. The usually quoted examples are cosmic radiation at ground level and 40 K in the body. Clearly, many exposures from natural sources could fall into this category. The challenges are firstly to establish a sound basis for deciding which should be excluded and which should be controlled, and secondly to see if the concept could or should be applied to artificial sources and exposures. These two questions are the subject of this paper. (author)

Glass melter materials technical options for the French vitrification process and operations experience authors

International Nuclear Information System (INIS)

Bonniaud, R.; Roznad, L.; Demay, R.

1986-09-01

The French vitrification process for solidifying high-level radioactive waste which has been under industrial application since 1978, is mentioned briefly. This technique involves glass melting at 1,150 deg.C, using an induction heated metallic vessel. The molten glass pouring is controlled by a thermal gate, which is also heated by induction. Two types of vessel are in use. Both are remotely removable and disposable to permit replacement at regular intervals. The technical criteria (the materials used have to meet) are described. The behaviour of the materials has been investigated using the industrial experience gained in the AVM facility during 8 years of operation, as well as with operation of a prototype for the new vitrification facilities under construction at La Hague. A short description of the use of these materials is also presented

Titanium alloys as alternative material for the supercontainer shell in the KBS-3H concept. A preliminary Ti-clay interaction study

Energy Technology Data Exchange (ETDEWEB)

Wersin, Paul (Gruner Ltd (Switzerland)); Grolimund, Daniel (Paul Scherrer Institute (Switzerland)); Kumpulainen, Sirpa; Kiviranta, Leena (BandTech Oy (Finland)); Brendle, Jocelyne (University of Mulhouse (France)); Snellman, Margit (Saanio and Riekkola Oy (Finland))

2010-12-15

Ti alloys have been proposed as alternative materials to steel for the supercontainer shell surrounding the bentonite buffer in the KBS-3H disposal concept. Ti-based materials display high strength and are known to behave chemically inert under a variety of conditions. This preliminary study addresses the suitability of titanium as supercontainer material with regard to the performance of the clay buffer. Thus, possible titanium-bentonite interactions which may adversely affect the buffer's safety functions are evaluated by means of a literature and a preliminary experimental assessment. Titanium metals display very low corrosion rates (< 1 nm/a) over a large range of pH and Eh conditions. The corrosion behaviour is governed by the low solubility of tetravalent TiO{sub 2} which forms a passive surface corrosion layer under both oxic and reducing conditions. The interactions between titanium and clay have been barely studied so far. Preliminary long-term data obtained by Prof. Olefjord and co-workers from Chalmers (S) in the 1980s (as part of SKB's canister program) suggests similar corrosion rates in compacted bentonite compared to those measured in water, i.e. <1 nm/a. So far, no work on reaction products from this interaction process has been carried out. Even the speciation of Ti in natural clays is uncertain. In principle, four possible reaction products resulting from Ti-clay interactions are possible: (i) Ti sorbed to the clay surface via cation exchange or specific adsorption, (ii) Ti incorporated in the octahedral or tetrahedral clay structure, (iii) Ti precipitated as separate TiO{sub 2} or mixed (Fe, Ti) oxide, (iv) Ti precipitated as separate silicate phase and (v) polymerized as cross-linked TiO{sub 2} units in the interlayer (Ti pillared clay). The latter two transformation products would have the strongest impact on the buffer, but are improbable on the basis of current knowledge. A preliminary batch-type investigation has been carried out

Titanium alloys as alternative material for the supercontainer shell in the KBS-3H concept: A preliminary Ti-clay interaction study

Energy Technology Data Exchange (ETDEWEB)

Wersin, P. [Gruner Ltd, Basel (Switzerland); Grolimund, D. [Paul Scherrer Inst., Villigen (Switzerland); Kumpulainen, S.; Kiviranta, L. [B and Tech Oy, Helsinki (Finland); Brendle, J. [Mulhouse Univ. (France); Snellman, M. [Saanio and Riekkola Oy, Helsinki (Finland)

2011-12-15

Ti alloys have been proposed as alternative materials to steel for the supercontainer shell surrounding the bentonite buffer in the KBS-3H disposal concept. Ti-based materials display high strength and are known to behave chemically inert under a variety of conditions. This preliminary study addresses the suitability of titanium as supercontainer material with regard to the performance of the clay buffer. Thus, possible titanium-bentonite interactions which may adversely affect the buffer's safety functions are evaluated by means of a literature and a preliminary experimental assessment. Titanium metals display very low corrosion rates (< 1 nm/a) over a large range of pH and Eh conditions. The corrosion behaviour is governed by the low solubility of tetravalent TiO{sub 2} which forms a passive surface corrosion layer under both oxic and reducing conditions. The interactions between titanium and clay have been barely studied so far. Preliminary long-term data obtained by Prof. Olefjord and co-workers from Chalmers (S) in the 1980ies (as part of SKB's canister program) suggests similar corrosion rates in compacted bentonite compared to those measured in water, i.e. 1 nm/a. So far, no work on reaction products from this interaction process has been carried out. Even the speciation of Ti in natural clays is uncertain. In principle, four possible reaction products resulting from Ti-clay interactions are possible: (i) Ti sorbed to the clay surface via cation exchange or specific adsorption, (ii) Ti incorporated in the octahedral or tetrahedral clay structure, (iii) Ti precipitated as separate TiO{sub 2} or mixed (Fe, Ti) oxide, (iv) Ti precipitated as separate silicate phase and (v) polymerized as cross-linked TiO{sub 2} units in the interlayer (Ti pillared clay). The latter two transformation products would have the strongest impact on the buffer, but are improbable on the basis of current knowledge. A preliminary batch-type investigation has been carried out

Titanium alloys as alternative material for the supercontainer shell in the KBS-3H concept. A preliminary Ti-clay interaction study

Energy Technology Data Exchange (ETDEWEB)

Wersin, Paul [Gruner Ltd (Switzerland); Grolimund, Daniel [Paul Scherrer Institute (Switzerland); Kumpulainen, Sirpa; Kiviranta, Leena [BandTech Oy (Finland); Brendle, Jocelyne [University of Mulhouse (France); Snellman, Margit [Saanio and Riekkola Oy (Finland)

2010-12-15

Ti alloys have been proposed as alternative materials to steel for the supercontainer shell surrounding the bentonite buffer in the KBS-3H disposal concept. Ti-based materials display high strength and are known to behave chemically inert under a variety of conditions. This preliminary study addresses the suitability of titanium as supercontainer material with regard to the performance of the clay buffer. Thus, possible titanium-bentonite interactions which may adversely affect the buffer's safety functions are evaluated by means of a literature and a preliminary experimental assessment. Titanium metals display very low corrosion rates (< 1 nm/a) over a large range of pH and Eh conditions. The corrosion behaviour is governed by the low solubility of tetravalent TiO{sub 2} which forms a passive surface corrosion layer under both oxic and reducing conditions. The interactions between titanium and clay have been barely studied so far. Preliminary long-term data obtained by Prof. Olefjord and co-workers from Chalmers (S) in the 1980s (as part of SKB's canister program) suggests similar corrosion rates in compacted bentonite compared to those measured in water, i.e. <1 nm/a. So far, no work on reaction products from this interaction process has been carried out. Even the speciation of Ti in natural clays is uncertain. In principle, four possible reaction products resulting from Ti-clay interactions are possible: (i) Ti sorbed to the clay surface via cation exchange or specific adsorption, (ii) Ti incorporated in the octahedral or tetrahedral clay structure, (iii) Ti precipitated as separate TiO{sub 2} or mixed (Fe, Ti) oxide, (iv) Ti precipitated as separate silicate phase and (v) polymerized as cross-linked TiO{sub 2} units in the interlayer (Ti pillared clay). The latter two transformation products would have the strongest impact on the buffer, but are improbable on the basis of current knowledge. A preliminary batch-type investigation has been carried out to shed

Sex Education Materials.

Science.gov (United States)

Singer-Magdoff, Laura

1969-01-01

After briefly discussing the philosophy of sex education and appraising generally the nature of the instructional methods and materials currently in use in the schools, the author provides brief but incisive reviews of a number of films, filmstrips, and other instructional materials dealing with sex. The reviews are continued in the succeeding…

Functionally graded materials

CERN Document Server

Mahamood, Rasheedat Modupe

2017-01-01

This book presents the concept of functionally graded materials as well as their use and different fabrication processes. The authors describe the use of additive manufacturing technology for the production of very complex parts directly from the three dimension computer aided design of the part by adding material layer after layer. A case study is also presented in the book on the experimental analysis of functionally graded material using laser metal deposition process.

Authorized limits for Fernald copper ingots

Energy Technology Data Exchange (ETDEWEB)

Frink, N.; Kamboj, S.; Hensley, J.; Chen, S. Y.

1997-09-01

This development document contains data and analysis to support the approval of authorized limits for the unrestricted release of 59 t of copper ingots containing residual radioactive material from the U.S. Department of Energy (DOE) Fernald Environmental Management Project (FEMP). The analysis presented in this document comply with the requirements of DOE Order 5400.5, {open_quotes}Radiation Protection of the Public and the Environment,{close_quotes} as well as the requirements of the proposed promulgation of this order as 10 CFR Part 834. The document was developed following the step-by-step process described in the Draft Handbook for Controlling Release for Reuse or Recycle Property Containing Residual Radioactive Material.

Authorized limits for Fernald copper ingots

International Nuclear Information System (INIS)

Frink, N.; Kamboj, S.; Hensley, J.; Chen, S.Y.

1997-09-01

This development document contains data and analysis to support the approval of authorized limits for the unrestricted release of 59 t of copper ingots containing residual radioactive material from the U.S. Department of Energy (DOE) Fernald Environmental Management Project (FEMP). The analysis presented in this document comply with the requirements of DOE Order 5400.5, open-quotes Radiation Protection of the Public and the Environment,close quotes as well as the requirements of the proposed promulgation of this order as 10 CFR Part 834. The document was developed following the step-by-step process described in the Draft Handbook for Controlling Release for Reuse or Recycle Property Containing Residual Radioactive Material

20-Year Subject and Author Index, Volume 1, 1997-Volume 20, 1996; Subject and Author Index, Volume 21, 1997.

Science.gov (United States)

Weiler, Robert M.; Pealer, Lisa N.

1997-01-01

This index provides readers interested in health behavior, health education, and health promotion ordered access to materials published in Health Values and the American Journal of Health Behavior, 1977-1997. The index includes 115 subject headings and 5 department headings, classifying 918 entries by 1,319 authors and coauthors. (SM)

Nuclear Regulatory Authority of the Slovak Republic. Annual Report 2015

International Nuclear Information System (INIS)

2016-01-01

A brief account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic (UJD SR) in 2015 is presented. These activities are reported under the headings: Foreword by the Chairperson; (1) Legislative activities; (2) Regulatory Activities; (3) Safety of nuclear installations; (4) Nuclear Materials; (5) Competence of the building authority; (6) Emergency planning and preparedness; (7) International activities; (8) Public relations; (9) Nuclear Regulatory Authority of the Slovak Republic; (10) Annexes; (11) Abbreviations.

Nuclear Regulatory Authority of the Slovak Republic. Annual Report 2016

International Nuclear Information System (INIS)

2017-01-01

A brief account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic (UJD SR) in 2016 is presented. These activities are reported under the headings: Foreword by the Chairperson; (1) Legislative activities; (2) Regulatory Activities; (3) Nuclear safety of nuclear installations; (4) Nuclear Materials; (5) Competence of the building authority; (6) Emergency planning and preparedness; (7) International activities; (8) Public relations; (9) Nuclear Regulatory Authority of the Slovak Republic; (10) Annexes; (11) Abbreviations.

Nuclear Regulatory Authority of the Slovak Republic. Annual Report 2013

International Nuclear Information System (INIS)

2014-04-01

A brief account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic (UJD SR) in 2013 is presented. These activities are reported under the headings: Foreword by the Chairperson; (1) Legislative activities; (2) Regulatory Activities; (3) Nuclear safety of nuclear power plants; (4) Nuclear Materials in SR; (5) Building Authority; (6) Emergency planning and preparedness; (7) International activities; (8) Public communication; (9) Nuclear Regulatory Authority of the Slovak Republic; (10) Annexes; (11) (12) Abbreviations.

Financial markets regulation in the energy sector. A few financial aspects of energy transactions

International Nuclear Information System (INIS)

Simonetti, S.

2007-01-01

In addition to energy legislation, financial markets legislation and regulation (FMR) are becoming increasingly important for the energy sector. Consequently, parties on the energy market not only have to deal with the energy and competition authorities (the Dte and NMa respectively), but may also face supervision by The Netherlands Authority for the Financial Markets (AFM). Energy transactions may trigger certain prohibitions and obligations under financial and securities law, the most relevant of which are discussed in this article. Both the recent changes as a result of the Financial Markets Supervision Act ('Wet op het financieel toezicht', Wft) entering into force as per 1 January 2007 and the anticipated future amendments following the implementation of the Markets in Financial Instruments Directive (MiFID) are examined [nl

10 CFR 74.33 - Nuclear material control and accounting for uranium enrichment facilities authorized to produce...

Science.gov (United States)

2010-01-01

... and special nuclear material in the accounting records are based on measured values; (3) A measurement... 10 Energy 2 2010-01-01 2010-01-01 false Nuclear material control and accounting for uranium... Section 74.33 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) MATERIAL CONTROL AND ACCOUNTING OF SPECIAL...

Efficiency analysis system of material management

Directory of Open Access Journals (Sweden)

Bogusław Śliwczyński

2012-12-01

Full Text Available Background: Significant scope of enterprise's efficiency management is improving of material management process both the strategic and operational level. The complexity of material flow processes can lead to a threat such as distraction and disintegration of analysis focusing on many different factors influenced on effective sourcing and procurement management, transport and warehousing processes, inventory management, working capital and cash flow management. Material and methods: The presented article focuses on multidimensional and multi-criteria analysis of material management efficiency that is considered as decision support system. Authors have presented results of the research regarding ineffective material management confirm insufficient analytical supporting in various decisions of procurement operations. Results and conclusions: Based on research results authors presented in the article model of efficiency analysis system of material management.

The tradition of intertextuality in the author's tale of the material of the Italian language

Directory of Open Access Journals (Sweden)

Маргарита Евгеньевна Каскова

2012-03-01

Full Text Available The article discussed the problem of drawing and interpretation of folklore stories by Italian authors. The tradition of intertextuality in the author's tale can be traced to ancient times and is regarded as an example of works by writers Fedro, S. Venni, C. Collodi, G. Rodari.

Method of treating radioactive waste material

International Nuclear Information System (INIS)

Allison, W.

1980-01-01

A method of treating radioactive waste material, particularly a radioactive sludge, is described comprising separating solid material from liquid material, compressing the solid material and encapsulating the solid material in a hardenable composition such as cement, bitumen or a synthetic resin. The separation and compaction stages are conveniently effected in a tube press. (author)

Normal mode analysis as a method to derive protein dynamics information from the Protein Data Bank.

Science.gov (United States)

Wako, Hiroshi; Endo, Shigeru

2017-12-01

Normal mode analysis (NMA) can facilitate quick and systematic investigation of protein dynamics using data from the Protein Data Bank (PDB). We developed an elastic network model-based NMA program using dihedral angles as independent variables. Compared to the NMA programs that use Cartesian coordinates as independent variables, key attributes of the proposed program are as follows: (1) chain connectivity related to the folding pattern of a polypeptide chain is naturally embedded in the model; (2) the full-atom system is acceptable, and owing to a considerably smaller number of independent variables, the PDB data can be used without further manipulation; (3) the number of variables can be easily reduced by some of the rotatable dihedral angles; (4) the PDB data for any molecule besides proteins can be considered without coarse-graining; and (5) individual motions of constituent subunits and ligand molecules can be easily decomposed into external and internal motions to examine their mutual and intrinsic motions. Its performance is illustrated with an example of a DNA-binding allosteric protein, a catabolite activator protein. In particular, the focus is on the conformational change upon cAMP and DNA binding, and on the communication between their binding sites remotely located from each other. In this illustration, NMA creates a vivid picture of the protein dynamics at various levels of the structures, i.e., atoms, residues, secondary structures, domains, subunits, and the complete system, including DNA and cAMP. Comparative studies of the specific protein in different states, e.g., apo- and holo-conformations, and free and complexed configurations, provide useful information for studying structurally and functionally important aspects of the protein.

Network meta-analysis of randomized trials in multiple myeloma: efficacy and safety in relapsed/refractory patients.

Science.gov (United States)

Botta, Cirino; Ciliberto, Domenico; Rossi, Marco; Staropoli, Nicoletta; Cucè, Maria; Galeano, Teresa; Tagliaferri, Pierosandro; Tassone, Pierfrancesco

2017-02-28

Despite major therapeutic advancements, multiple myeloma (MM) is still incurable and relapsed/refractory multiple myeloma (RRMM) remains a challenge; the rational choice of the most appropriate regimen in this setting is currently undefined. We performed a systematic review and 2 standard pairwise meta-analyses to evaluate the efficacy of regimens that have been directly compared with bortezomib or immunomodulatory imide drugs (IMiDs) in head-to-head clinical trials and a network meta-analysis (NMA) to determine the relevance of each regimen on the basis of all the available direct and indirect evidence. Sixteen trials were included in the pairwise meta-analyses, and 18 trials were included in the NMA. Pairwise meta-analyses showed that a 3-drug regimen (bortezomib- or IMiD-based) was superior to a 2-drug regimen in progression-free-survival (PFS) and overall response rate (ORR). NMA showed that an IMiD backbone associated with anti-MM monoclonal antibodies (mAbs) (preferably) or proteasome inhibitors had the highest probability of being the most effective regimen with the lowest toxicity. The combination of daratumumab, lenalidomide, and dexamethasone ranked as the first regimen in terms of activity, efficacy, and tolerability according to the average value between surface under the cumulative ranking curve of PFS, overall survival, ORR, complete response rate, and safety. This is the first NMA comparing all currently available regimens evaluated in published randomized trials for the treatment of RRMM, but our results need to be interpreted taking into account differences in their patient populations. Our analysis suggests that IMiDs plus new anti-MM mAb-containing regimens are the most active therapeutic option in RRMM.

Xenon spatial oscillation in nuclear power reactors:an analytical approach through non linear modal analysis

International Nuclear Information System (INIS)

Suarez Antola, R.

2005-01-01

It was proponed recently to apply an extension of Lyapunov's first method to the non-linear regime, known as non-linear modal analysis (NMA), to the study of space-time problems in nuclear reactor kinetics, nuclear power plant dynamics and nuclear power plant instrumentation and control(1). The present communication shows how to apply NMA to the study of Xenon spatial oscillations in large nuclear reactors. The set of non-linear modal equations derived by J. Lewins(2) for neutron flux, Xenon concentration and Iodine concentration are discussed, and a modified version of these equations is taken as a starting point. Using the methods of singular perturbation theory a slow manifold is constructed in the space of mode amplitudes. This allows the reduction of the original high dimensional dynamics to a low dimensional one. It is shown how the amplitudes of the first mode for neutron flux field, temperature field and concentrations of Xenon and Iodine fields can have a stable steady state value while the corresponding amplitudes of the second mode oscillates in a stable limit cycle. The extrapolated dimensions of the reactor's core are used as bifurcation parameters. Approximate analytical formulae are obtained for the critical values of this parameters( below which the onset of oscillations is produced), for the period and for the amplitudes of the above mentioned oscillations. These results are applied to the discussion of neutron flux and temperature excursions in critical locations of the reactor's core. The results of NMA can be validated from the results obtained applying suitable computer codes, using homogenization theory(3) to link the complex heterogeneous model of the codes with the simplified mathematical model used for NMA

Normal mode analysis based on an elastic network model for biomolecules in the Protein Data Bank, which uses dihedral angles as independent variables.

Science.gov (United States)

Wako, Hiroshi; Endo, Shigeru

2013-06-01

We have developed a computer program, named PDBETA, that performs normal mode analysis (NMA) based on an elastic network model that uses dihedral angles as independent variables. Taking advantage of the relatively small number of degrees of freedom required to describe a molecular structure in dihedral angle space and a simple potential-energy function independent of atom types, we aimed to develop a program applicable to a full-atom system of any molecule in the Protein Data Bank (PDB). The algorithm for NMA used in PDBETA is the same as the computer program FEDER/2, developed previously. Therefore, the main challenge in developing PDBETA was to find a method that can automatically convert PDB data into molecular structure information in dihedral angle space. Here, we illustrate the performance of PDBETA with a protein-DNA complex, a protein-tRNA complex, and some non-protein small molecules, and show that the atomic fluctuations calculated by PDBETA reproduce the temperature factor data of these molecules in the PDB. A comparison was also made with elastic-network-model based NMA in a Cartesian-coordinate system. Copyright © 2013 Elsevier Ltd. All rights reserved.

Investigation of fretting corrosion of vacuum-chrome-plated vt3-1 titanium alloy in pair with unprotected vt3-1 alloy and 40khnma steel

International Nuclear Information System (INIS)

Rojkh, I.L.; Koltunova, L.N.; Vejtsman, M.G.; Birman, Ya.N.; Skosarev, A.V.; Kogan, I.S.

1978-01-01

The character of destruction of contacting surfaces in the process of fretting corrosion of titanium alloy VT3-1 chromized in vacuum in pair with unprotected alloy VT3-1 and steel 40KhNMA has been studied by scanning electron microscopy, electronography, and recording the surface profile. The specific load was 200 kg/cm 2 , vibration amplitude 50 mkm and frequency 500 Hz. It has been established that pairs unprotected with coating are subjected to intensive fretting corrosion especially when they are made of titanium alloy. For the pair chromized alloy VT3-1 - unprotected alloy VT3-1 no destruction of a chromized surface is observed. Vacuum chromium coating in the pair with steel 40KhNMA reveals similar properties as in pair with a titanium alloy. The surface of a steel sample is destroyed because of fretting corrosion, though the intensity of corrosion is lower than in the case of unprotected pairs. Vacuum chromium coating is recommended for protection of titanium alloy VT3-1 from fretting corrosion in pair with steel 40KhNMA or an alloy VT3-1 especially in those cases when various organic coatings are unsuitable

Prognostic factors and outcome in relapsed multiple myeloma after nonmyeloablative allo-SCT: a single center experience.

Science.gov (United States)

Minnema, M C; van Dorp, S; van de Donk, N W C J; Schouten, F; Kersten, M J; Coenen, J L L M; Schouten, H; Zweegman, S; Schaafsma, R; Lokhorst, H M

2011-02-01

For relapsed multiple myeloma (MM) patients, allo-SCT is a possible treatment option, but recent data obtained using a nonmyeloablative (NMA) conditioning regimen are scarce. We retrospectively collected data from 38 relapsed MM patients who received a NMA allo-SCT from October 2001 to January 2008. In total, 18 patients (48%) were transplanted using a matched unrelated donor. The median follow-up is 2.3 years. In 16 patients (42%) the response improved and eight patients (21%) were rapidly progressive within 6 months after allo-SCT. In total, 15 patients (39%) were in CR after allo-SCT. The median PFS was 1.4 years (range, 0.1-4.9), and having a CR after allo-SCT or having chronic GVHD resulted in longer PFS. Median OS was 3.1 years (range, 0.2-7.2) and again having a CR after allo-SCT or chronic GVHD was associated with a better OS. Six patients (16%) have died from treatment-related diseases. These results indicate that NMA allo-SCT is a treatment option in relapsed MM patients and that results may be improved by strategies that enhance the CR rate after allo-SCT.

Survey of currently available reference materials for use in connection with the determination of trace elements in biological materials

International Nuclear Information System (INIS)

Parr, R.M.

1983-09-01

Elemental analysis of biological materials is at present the subject of intensive study by many different research groups throughout the world, in view of the importance of these trace elements in health and medical diagnosis. IAEA and other organizations are now making a variety of suitable reference materials available for use in connection with the determination of trace elements in biological materials. To help analysts in making a selection from among these various materials, the present report provides a brief survey of data for all such biological reference materials known to the author. These data are compiled by the author from January 1982 to June 1983

Comparative efficacy and acceptability of antidepressants, psychological interventions, and their combination for depressive disorder in children and adolescents: protocol for a network meta-analysis.

Science.gov (United States)

Zhou, Xinyu; Cipriani, Andrea; Zhang, Yuqing; Cuijpers, Pim; Hetrick, Sarah E; Weisz, John R; Pu, Juncai; Giovane, Cinzia Del; Furukawa, Toshiaki A; Barth, Jürgen; Coghill, David; Leucht, Stefan; Yang, Lining; Ravindran, Arun V; Xie, Peng

2017-08-11

sensitivity analyses will be conducted to assess the robustness of the findings. This NMA will provide the most up to date and clinically useful information about the comparative efficacy and acceptability of antidepressants, psychological intervention and their combination in the acute treatment of children and adolescents with depressive disorder. This is the newest NMA and therefore these results are very important in terms of evidence-based medicine. The results will be disseminated through peer-reviewed publication. PROSPERO CRD42015020841. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Friction material composites copper-metal-free material design perspective

CERN Document Server

Sundarkrishnaa, K L

2015-01-01

This book examines material composites used in connection with brake friction, their design and safety. To aid in understanding, the essentials of friction are explained. This second edition was extended to include friction material composites without copper, as they offer an environmentally friendlier option. The second edition is intended to support beginners by offering insights into the essentials of friction material composites, helping them to develop a broader understanding of brake friction materials. Friction materials find wide-ranging applications in household and industrial appliances, brake pads for automotive applications, rail brake friction pads and composition brake blocks. This second edition is an introductory volume to a set of related books, and is based on the author’s experience and expertise with various material manufacturers, brake manufacturers, vehicle manufacturers, researchers and testing labs around the world with which the author has been associated for the past 28 years.

Light-material interactions in laser material processing

International Nuclear Information System (INIS)

Chiang, S.; Albright, C.E.

1989-01-01

The authors discusses how light interactions with materials in laser material processing operations occur by a variety of mechanisms depending on the material being processed, the wavelength of the laser light, the gaseous environment, and the physical state of the material surface. The high reflectivity of metals limits the fraction of the beam power absorbed by the solid metal surface. For metals in the solid state, reflectivity increases as the wavelength of the laser light and the electrical conductivity of the metal increase. The reflectivity of metals is reduced upon heating to the melting point, and further reduced upon melting. At high power densities the liquid metal surface is heated so quickly that very rapid vaporization occurs. The recoil force produced by the evaporation causes a depression in the liquid/vapor interface. The keyhole resulting from this depression allows for multiple reflections and thus increases beam absorption in the liquid

Competent authority approval of package designs in the United Kingdom

International Nuclear Information System (INIS)

Morgan-Warren, E.J.

1999-01-01

Type B packages and all packages containing fissile material, as well as special form radioactive materials, special arrangements and certain shipments, are required to be approved by the competent authority. In the United Kingdom competent authority approval is carried out on behalf of the Secretary of State by the Radioactive Materials Transport Division (RMTD) of the Department of the Environment, Transport and the Regions (DETR). Competent authority approval of a package design is given only after a detailed assessment of the design by the specialist staff of RMTD. There are three facets to the assessment procedure, namely engineering, criticality and radiation protection, and quality assurance. The engineering assessor ensures that the designer has demonstrated the integrity of the containment and shielding systems under the regulatory conditions. The criticality assessor examines criticality safety and radiation protection measures, and together with the engineering assessor, decides whether this is maintained under regulatory conditions. The quality assurance assessor verifies that the applicant has established the necessary controls to ensure that the design requirements are met. The applicant is responsible for making the case for approval, but the assessment is facilitated if the competent authority is involved with the designer at an early stage in development and during the construction of any test prototype. When a regulatory test programme is required, it is designed and carried out by the applicant, but agreed and witnessed by representatives of RMTD. Following the test programme, the applicant submits a formal application, supported by a design safety report (DSR). The DSR provides a full analysis of the design and the test results, including the behaviour of the package under normal and accident conditions of transport, the manufacturing and maintenance procedures, quality assurance and the emergency provisions for the operation of the package

Functional materials in amperometric sensing polymeric, inorganic, and nanocomposite materials for modified electrodes

CERN Document Server

Seeber, Renato; Zanardi, Chiara

2014-01-01

Amperometric sensors, biosensors included, particularly rely on suitable electrode materials. Progress in material science has led to a wide variety of options that are available today. For the first time, these novel functional electrode coating materials are reviewed in this monograph, written by and for electroanalytical chemists. This includes intrinsically conducting, redox and ion-exchange polymers, metal and carbon nanostructures, silica based materials. Monolayers and relatively thick films are considered. The authors critically discuss preparation methods, in addition to chemical and

Use of alpha spectrometry for analysis of U-isotopes in some granite samples

International Nuclear Information System (INIS)

El-Galy, M.M.; Desouky, O.A.; Khattab, M.R.; Issa, F.A.

2011-01-01

The present study aims to use the α-spectrometry, at NMA. A radiochemical technique for analysis of U-isotopes was carried out for some granite samples from Gabal Gattar and El Missikat localities and also for some reference soil samples of IAEA. Several steps of sample preparation, radiochemical separation, and source preparation were performed before analysis. The concerned sample was leached by HNO 3 , HF and H 2 O 2 acids after ashing. The ashed sample was spiked with uranium tracer ( 232 U) for chemical yield and activity calculation. Then uranium was extracted from the matrix elements with trioctylphosphine oxide (TOPO) and stripped with 1 M NH 4 F/0.1 M HCl solution. The uranium fraction was purified by co-precipitation with LaF 3 to ensure complete removal of thorium and traces of resolution degrading elements. This was followed by a final clean-up step using an anion exchange. The pure uranium fraction was electrodeposited on a stainless steel disc from HCl/oxalate solution. The obtained results from the soil reference samples indicate general similarities between the techniques of α-spectrometers of NMA, EAEA and IAEA for analysis of U-isotopes. The U-isotopes in the granite samples of high radioactivity levels need more attempts after dilution process to be in the limit detection of α-spectrometry. (author)

Computer-Aided Authoring of Programmed Instruction for Teaching Symbol Recognition. Final Report.

Science.gov (United States)

Braby, Richard; And Others

This description of AUTHOR, a computer program for the automated authoring of programmed texts designed to teach symbol recognition, includes discussions of the learning strategies incorporated in the design of the instructional materials, hardware description and the algorithm for the software, and current and future developments. Appendices…

Development of magnetic materials

International Nuclear Information System (INIS)

Bar'yakhtar, V.

2000-01-01

In the paper are presented both experimental and theoretical basic results of physics of magnetic materials. The special attention is given to a problem of creation of magnetic materials for recording and reproduction of the information. The influence of fundamental scientific results on process of creation of materials with the given properties and constriction of devices and facilities of new generation, and return influence of financing of scientific researches on process of discovering of new unknown fundamental properties of magnetic materials is considered. (author)

Nanophase materials produced by physical methods

International Nuclear Information System (INIS)

Noda, Shoji

1992-01-01

A nanophase material is mainly characterized by the component's size and the large interface area. Some nanophase materials are briefly described. Ion implantation and oblique vapor deposition are taken as the methods to provide nanophase materials, and their features are described. These physical methods are non-equilibrium material processes, and the unique nanophase materials are demonstrated to be provided by these methods with little thermodynamic restriction. (author)

Transport of Radioactive Materials

International Nuclear Information System (INIS)

2001-01-01

This address overviews the following aspects: concepts on transport of radioactive materials, quantities used to limit the transport, packages, types of packages, labeling, index transport calculation, tags, labeling, vehicle's requirements and documents required to authorize transportation. These requirements are considered in the regulation of transport of radioactive material that is in drafting step

Inventory of nuclear materials in case of emergency

International Nuclear Information System (INIS)

Portugal, J.L.; Zanetti, S.

2001-01-01

The crisis situations for nuclear materials in nuclear facilities are provided for in the French regulation, as the decree of 12 May 1981 specifies that 'In any circumstance, the Ministry of Industry can order a physical inventory of the materials and its comparison with the accountancy records'. Such an inventory can be ordered in facilities holding category I nuclear materials, in case of a theft for example. The operators must be able to establish quickly if the stolen materials come from their facility. To test the organization set at the operators and competent authority levels respectively, five exercises of increasing complexity have already been carried out. These exercises have permitted the validation of procedures, composition of the various crisis centers, methodology for such an inventory and use of protected communication means. The authority crisis center includes members of the competent Authority and it's technical support body: staff members of the IPSN. It is in charge of the national managing of the operations, in relation with one or several site crisis centers. The site crisis center is the interface between the authorities and the facility crisis center. The operations of inventory are carried out from the roughest checking to the finest ones. To be efficient during the first hours of the crisis, the authority crisis center must have data bases at the disposal of its experts, containing information about physical protection and accountancy of the nuclear materials detained by the site and the relevant facilities. (authors)

Combine material against electromagnetic pulse disturbance

International Nuclear Information System (INIS)

Liu Yan

2004-01-01

A novel combined material is introduced, which is hard against electromagnetic pulse disturbance, The attenuation characteristics and the penetration probability of the combine material is discussed in detail. The penetration probability of electromagnetic wave is calculated approximately and the characteristic curve is measured for this material. (authors)

Choose of standard materials in the method of β-testing new materials' mass thickness

International Nuclear Information System (INIS)

Chen Zhong

2007-01-01

To make sure of the standard mass thickness in beta radials testing mass thickness, this paper calculate using M. C. method and get the result of the relations between the beta radials' transmission rate of different energies and mass thickness in different materials. This result prove that in method of beta test mass thickness choosing materials whose elements are close as standard materials are viable. (authors)

Molecular Engineering of dosimetric materials

International Nuclear Information System (INIS)

Salas, P.; Castano, V.M.; Mendoza, D.; Gonzalez, P.

1999-01-01

It was studied the thermoluminescent response to the gamma radiation of a new family of solid materials of zircon-silica. In this study some materials have been prepared by the sol-gel method with different stoichiometric relations, finding that it is possible to control, at least, partially, the thermoluminescent behavior starting from the Molecular Engineering of those materials, since the mixture of both ceramics allows to produce materials with different spatial structures. (Author)

The preliminary Long Duration Exposure Facility (LDEF) materials data base

International Nuclear Information System (INIS)

Funk, J.G.; Strickland, J.W.; Davis, J.M.

1992-10-01

A preliminary Long Duration Exposure Facility (LDEF) Materials Data Base was developed by the LDEF Materials Special Investigation Group (MSIG). The LDEF Materials Data Base is envisioned to eventually contain the wide variety and vast quantity of materials data generated for LDEF. The data is searchable by optical, thermal, and mechanical properties, exposure parameters (such as atomic oxygen flux), and author(s) or principal investigator(s). The LDEF Materials Data Base was incorporated into the Materials and Processes Technical Information System (MAPTIS). MAPTIS is a collection of materials data which was computerized and is available to engineers, designers, and researchers in the aerospace community involved in the design and development of spacecraft and related hardware. This paper describes the LDEF Materials Data Base and includes step-by-step example searches using the data base. Information on how to become an authorized user of the system is included

The preliminary Long Duration Exposure Facility (LDEF) materials data base

Science.gov (United States)

Funk, Joan G.; Strickland, John W.; Davis, John M.

1992-01-01

A preliminary Long Duration Exposure Facility (LDEF) Materials Data Base was developed by the LDEF Materials Special Investigation Group (MSIG). The LDEF Materials Data Base is envisioned to eventually contain the wide variety and vast quantity of materials data generated for LDEF. The data is searchable by optical, thermal, and mechanical properties, exposure parameters (such as atomic oxygen flux), and author(s) or principal investigator(s). The LDEF Materials Data Base was incorporated into the Materials and Processes Technical Information System (MAPTIS). MAPTIS is a collection of materials data which was computerized and is available to engineers, designers, and researchers in the aerospace community involved in the design and development of spacecraft and related hardware. This paper describes the LDEF Materials Data Base and includes step-by-step example searches using the data base. Information on how to become an authorized user of the system is included.

Buildings materials and raw materials as a source of exposition of population of the Slovak Republic

International Nuclear Information System (INIS)

Cabanekova, H.

2005-01-01

In this presentation author presents specific activities of potassium-40, radium-226, thorium-232 and equivalent of specific activity in some building materials and raw materials used at building-up of flats in the Slovak Republic

Leaching materials from cavities

International Nuclear Information System (INIS)

Hodgson, T.D.; Jordan, T.W.J.

1980-01-01

A material is leached from a cavity by contacting the material with a liquid and subjecting the liquid to a number of pressure cycles, each pressure cycle involving a decrease in pressure to cause boiling of the liquid, followed by a rise in pressure to inhibit the boiling. The method may include the step of heating the liquid to a temperature near to its boiling point. The material may be nuclear fuel pellets or calcium carbonate pellets. (author)

Technical Memory 2010. Nuclear Regulatory Authority

International Nuclear Information System (INIS)

2010-01-01

The technical memory 2010 of the Nuclear Regulatory Authority of Argentine Republic, compile the papers published in the subject on radiation protection and nuclear safety presented in journals, technical reports, congress or meetings of these subjects by the ARN personnel during 2010. In this edition the documents are presented on: environmental protection; safety transport of radioactive materials; regulations; licensing of medical installations; biological radiation effects; therapeutic uses of ionizing radiation and radioprotection of patients; internal dosimetry; radioactive waste management [es

Technical Memory 2011. Nuclear Regulatory Authority

International Nuclear Information System (INIS)

2011-01-01

The technical memory 2011 of the Nuclear Regulatory Authority of Argentine Republic, compile the papers published in the subject on radiation protection and nuclear safety presented in journals, technical reports, congress or meetings of these subjects by the ARN personnel during 2011. In this edition the documents are presented on: environmental protection; safety transport of radioactive materials; regulations; licensing of medical installations; biological radiation effects; therapeutic uses of ionizing radiation and radioprotection of patients; internal dosimetry; radioactive waste management [es

MEVSİMLİK TARIM İŞÇİLERİNİN BARINMA KOŞULLARININ DEĞERLENDİRİLMESİ: YENİCE, TARSUS, SİLİFKE ÖRNEKLERİ

Directory of Open Access Journals (Sweden)

Mehmet AKALIN

2018-03-01

Full Text Available Bu çalışmada Mersin il sınırları içerisinde çalışan mevsimlik tarım işçilerinin barınma koşulları değerlendirilmiştir. Çalışmanın amacı, siyasi karar alma mekanizmalarının ve sivil toplum kuruluşlarının, mevsimlik tarım işçilerinin barınma koşullarına ilişkin olarak yapacakları hukuki düzenlemeler ve eylem planları için bir rehber oluşturmaktır. Çalışmada niteliksel araştırma yöntemi olarak; derinlemesine görüşme, katılımlı gözlem ve fotoğraf analizi kullanılmıştır. Alan araştırması kapsamında, Mart/2017- Eylül/2017 döneminde, 120 kişi ile derinlemesine görüşmeler gerçekleştirilmiş; çekilen resimlerle, barınakların fiziksel ve çevresel özellikleri hakkında okuyucuların fikir edinebilmeleri sağlanmıştır. Sonuç olarak mevsimlik tarım işçilerinin barınma şartlarının elverişsiz ve sağlıksız olduğu; barınakların insan onuruna yakışır düzeyde olmadığı tespit edilmiş; mevsimlik tarım işçilerinin barınma şartlarının iyileştirilmesi için önerilerde bulunulmuştur.

Object Lessons: Thinking about Material Culture

Science.gov (United States)

Burkhart, Anne

2006-01-01

This article describes why art educators might consider studying material forms from everyday life, presents suggestions for exploring them in an art classroom, and includes an example to illustrate teaching about an object of material culture. The author presents reasons for studying material culture in the art classroom and offers suggestions…

Nuclear materials

International Nuclear Information System (INIS)

1996-01-01

In 1998, Nuclear Regulatory Authority of the Slovak Republic (NRA SR) performed 38 inspections, 25 of them were performed in co-operation with IAEA inspectors. There is no fresh nuclear fuel at Bohunice A-1 NPP at present. Fresh fuel of Bohunice V-1 and V-2 NPPs is inspected in the fresh fuel storage.There are 327 fresh fuel assemblies in Mochovce NPP fresh fuel storage. In addition to that, are also 71 small users of nuclear materials in Slovakia. In most cases they use: covers made of depleted uranium for non-destructive works, detection of level in production plants, covers for therapeutical sources at medical facilities. In. 1995, NRA SR issued 4 new licences for nuclear material withdrawal. In the next part manipulation with nuclear materials, spent fuel stores and illegal trafficking in nuclear materials are reported

Materials Department. Annual report 1990

International Nuclear Information System (INIS)

Horsewell, A.; Hansen, N.

1991-07-01

Selected activities of the Materials Department at Risoe National Laboratory during 1990 are described. The work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given of the Department's participation in international collaboration and of its activities within education and training. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists, publications, lectures and poster presentations are included. (author) 91 refs., 46 ills

Materials and nanotechnology

International Nuclear Information System (INIS)

2014-01-01

The focus of the Materials and Nanotechnology Program is technology development related to processing, analysis, testing and characterization of materials in general. These are achieved through execution of R&D projects in engineering and materials science, cooperative projects with private and public sector companies, universities and other research institutes. Besides technology development, this Program also fosters training and human resource development in association with the University of São Paulo and many industrial sectors. This Program is divided into sub-programs in broad areas such as ceramic, composite and metallic materials as well as characterization of physical and chemical properties of materials. The sub-programs are further divided into general topics and within each topic, R&D projects. A brief description of progress in each topic during the last three years follows. (author)

Status report on Texas Low-Level Radioactive Waste Disposal Authority activities

International Nuclear Information System (INIS)

Avant, R.V. Jr.

1990-01-01

In 1981, the Texas Low-Level Radioactive Waste Disposal Authority was created by Article 4590f-1 to site, develop, operate, decommission, and close a low-level radioactive waste disposal facility for Texas generated waste. In 1989, the Authority's act was recodified by the Texas legislature in the Health and Safety Code., Title 5. Sanitation and Environmental Quality, Subtitle D. Nuclear and Radioactive Materials, Chapter 402. The Authority is governed by a Board of Directors appointed by the Governor, composed of a certified health physicist, geologist, attorney, medical doctor, and two private citizens. Under the statute, low-level radioactive waste is defined as any radioactive material with a half-life of 35 years or less or having less than 10 nanocuries per gram of transuranics. Materials with half-lives of greater than 35 years may be classed as low-level waste if special criteria are established by the Texas Department of Health Bureau of Radiation Control. Subsequent sessions of the legislature have amended the act to revise siting criteria, require consideration of state land, create a Citizen's Advisory Committee, incorporate alternative designs, and establish a special low-level radioactive waste account in the state treasury. The Authority began its activities in 1982. The Authority has proposed a site in far West Texas near Fort Hancock, but El Paso County, the neighboring county to the west, has instituted three separate lawsuits to slow or stop the site selection process. Particular attention was paid early in the site selection process to items which could be fatal flaws from a licensing standpoint. This paper discusses the Fort Hancock site description, site evaluation studies, siting issues, waste volume projections, facility design, license application, cost and schedule

Mycological Research: instructions and guidelines for authors.

Science.gov (United States)

Hawksworth, David L

2007-01-01

Instructions and guidelines for authors submitting papers to Mycological Research are provided. The journal is international and covers all fields of mycology, both fundamental and applied. It publishes news items, reviews, original papers, and book reviews. Contributions should be of interest to a wide spectrum of mycologists or make significant novel contributions. Papers with particularly exciting results are fast-tracked and prioritized for publication. Submission must be made online via the Elsevier Editorial System (ees.elsevier.com/mycres); hard copy submissions are no longer accepted. Information is provided on: scope and timeliness; submission of articles; manuscript preparation; tables; illustrations; spellings, numbers, chemical symbols, and abbreviations; voucher material; molecular data; taxonomic data; references; the decision-making process; copyright; author's copies; proofs; and further questions.

The first word in material control is material

International Nuclear Information System (INIS)

Martin, H.R.; Wilkey, D.D.

1989-01-01

Material control has tended to rely on containment and access control, augmented by physical inventories, to meet the material control and accounting (MC ampersand A) goals of detecting theft/diversion and providing assurance that all nuclear material (NM) is present. Such systems have significant deficiencies. Material containment strategies are generally based on protection provided at boundaries around the NM and rely on alarms at the boundary for detection of theft/diversion. Assurance that all NM is present requires a negative inference based on the absence of alarms. Additionally, design of effective boundary protection systems requires that the designer be able to anticipate and provide protection for all scenarios that the insider adversary might utilize in removing material from the facility. Access control is an administrative system that cannot protect against malevolent actions by insiders authorized to access the material. Inventories may not provide timely detection of theft/diversion, and the sensitivity of detection depends on the magnitude of the variance of the inventory difference. More effective material control is provided for both material in storage and in process by a material-oriented system designed to detect abnormal events involving NM. Abnormal events are defined as any unauthorized activity involving NM, whether accidental or deliberate, and are assessed to determine the cause of the discrepancy. The designs of material-oriented control systems vary greatly, depending on the operations involved; however, a model system would include the use of process monitoring data for material control and automated surveillance of material in storage

75 FR 35660 - Massachusetts: Final Authorization of State Hazardous Waste Management Program Revisions

Science.gov (United States)

2010-06-23

... copyrighted material, is not placed on the Internet and will be publicly available only in hard copy form... hard copy at the following two locations: (i) Massachusetts Department of Environmental Protection...: dredged material exemption at 40 CFR 261.4(g)--State: formatting corrections to previously authorized...

Factsheet 2010. Quality Regional Management for Electricity and Natural Gas Networks. Expert version; Factsheet 2010. Kwaliteit Regionaal Netbeheer Elektriciteitsnetten en Gasnetten. Expert versie

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-12-15

Regional grid operators take care of distribution of electricity and gas for households and small and medium-sized businesses. Moreover, they are responsible for monitoring and maintaining their grids. The Dutch Office of Energy Regulation supervises the quality of the grids of the grid operators. The Dutch Office of Energy Regulation considers quality to consist of four aspects: security of transport, safety, product quality and services quality. The Factsheets offer insight in how a grid operator has performed in recent years. By publishing the Factsheets on Quality, the Dutch Office of Energy Regulation aims to offer an objective, broad view on the realized quality by the grid operators [Dutch] Regionale netbeheerders verzorgen het transport van elektriciteit en gas voor onder andere huishoudens en het midden- en kleinbedrijf. Ze zijn daarnaast verantwoordelijk voor het onderhoud en de instandhouding van hun netten. De Energiekamer NMa houdt toezicht op de kwaliteit van de netten van netbeheerders. Onder kwaliteit verstaat de Energiekamer NMa vier aspecten: transportzekerheid, veiligheid, productkwaliteit en kwaliteit van dienstverlening. De Factsheets geven inzicht in hoe een netbeheerder gedurende de afgelopen jaren gepresteerd heeft. Met het publiceren van de Factsheets Kwaliteit beoogt de Energiekamer NMa een objectief en breed beeld van de gerealiseerde kwaliteit door netbeheerders te geven.

Factsheet 2011. Quality Regional Management for Electricity and Natural Gas Transport Networks; Factsheet 2011. Kwaliteit Regionaal Netbeheer Elektriciteitsnetten en Gastransportnetten

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-15

Regional grid operators take care of distribution of electricity and gas for households and small and medium-sized businesses. Moreover, they are responsible for monitoring and maintaining their grids. The Dutch Office of Energy Regulation supervises the quality of the grids of the grid operators. The Dutch Office of Energy Regulation considers quality to consist of four aspects: security of transport, safety, product quality and services quality. The Factsheets offer insight in how a grid operator has performed in recent years. By publishing the Factsheets on Quality, the Dutch Office of Energy Regulation aims to offer an objective, broad view on the realized quality by the grid operators [Dutch] Regionale netbeheerders verzorgen het transport van elektriciteit en gas voor onder andere huishoudens en het midden- en kleinbedrijf. Ze zijn daarnaast verantwoordelijk voor het onderhoud en de instandhouding van hun netten. De Energiekamer NMa houdt toezicht op de kwaliteit van de netten van netbeheerders. Onder kwaliteit verstaat de Energiekamer NMa vier aspecten: transportzekerheid, veiligheid, productkwaliteit en kwaliteit van dienstverlening. De Factsheets geven inzicht in hoe een netbeheerder gedurende de afgelopen jaren gepresteerd heeft. Met het publiceren van de Factsheets Kwaliteit beoogt de Energiekamer NMa een objectief en breed beeld van de gerealiseerde kwaliteit door netbeheerders te geven.

Software and package applicating for network meta-analysis: A usage-based comparative study.

Science.gov (United States)

Xu, Chang; Niu, Yuming; Wu, Junyi; Gu, Huiyun; Zhang, Chao

2017-12-21

To compare and analyze the characteristics and functions of software applications for network meta-analysis (NMA). PubMed, EMbase, The Cochrane Library, the official websites of Bayesian inference Using Gibbs Sampling (BUGS), Stata and R, and Google were searched to collect the software and packages for performing NMA; software and packages published up to March 2016 were included. After collecting the software, packages, and their user guides, we used the software and packages to calculate a typical example. All characteristics, functions, and computed results were compared and analyzed. Ten types of software were included, including programming and non-programming software. They were developed mainly based on Bayesian or frequentist theory. Most types of software have the characteristics of easy operation, easy mastery, exact calculation, or excellent graphing. However, there was no single software that performed accurate calculations with superior graphing; this could only be achieved through the combination of two or more types of software. This study suggests that the user should choose the appropriate software according to personal programming basis, operational habits, and financial ability. Then, the choice of the combination of BUGS and R (or Stata) software to perform the NMA is considered. © 2017 Chinese Cochrane Center, West China Hospital of Sichuan University and John Wiley & Sons Australia, Ltd.

Fundamentals of materials accounting for nuclear safeguards

Energy Technology Data Exchange (ETDEWEB)

Pillay, K.K.S. (comp.)

1989-04-01

Materials accounting is essential to providing the necessary assurance for verifying the effectiveness of a safeguards system. The use of measurements, analyses, records, and reports to maintain knowledge of the quantities of nuclear material present in a defined area of a facility and the use of physical inventories and materials balances to verify the presence of special nuclear materials are collectively known as materials accounting for nuclear safeguards. This manual, prepared as part of the resource materials for the Safeguards Technology Training Program of the US Department of Energy, addresses fundamental aspects of materials accounting, enriching and complementing them with the first-hand experiences of authors from varied disciplines. The topics range from highly technical subjects to site-specific system designs and policy discussions. This collection of papers is prepared by more than 25 professionals from the nuclear safeguards field. Representing research institutions, industries, and regulatory agencies, the authors create a unique resource for the annual course titled ''Materials Accounting for Nuclear Safeguards,'' which is offered at the Los Alamos National Laboratory.

Physics and Chemistry of Earth Materials

Science.gov (United States)

Navrotsky, Alexandra

1994-11-01

Stressing the fundamental solid state behavior of minerals, and emphasizing both theory and experiment, this text surveys the physics and chemistry of earth materials. The author begins with a systematic tour of crystal chemistry of both simple and complex structures (with completely new structural drawings) and discusses how to obtain structural and thermodynamic information experimentally. Dr. Navrotsky also reviews the quantitative concepts of chemical bonding--band theory, molecular orbit and ionic models. She then covers physical properties and relates microscopic features to macroscopic thermodynamic behavior and treats high pressure phase transitions, amorphous materials and solid state reactions. The author concludes with a look at the interface between mineral physics and materials science. Highly illustrated throughout, this book fills the gap between undergraduate texts and specialized review volumes and is appropriate for students and researchers in earth science and materials science.

Nuclear Regulatory Authority Act, 2015 (Act 895)

International Nuclear Information System (INIS)

2015-04-01

An Act to establish a Nuclear Regulatory Authority in Ghana. This Act provides for the regulation and management of activities and practices for the peaceful use of nuclear material or energy, and to provide for the protection of persons and the environment against the harmful effects of radiation; and to ensure the effective implementation of the country’s international obligations and for related matters. This Act replaced the Radiation Protection Instrument, of 1993 (LI 1559).

76 FR 6594 - North Carolina: Final Authorization of State Hazardous Waste Management Program Revisions

Science.gov (United States)

2011-02-07

... Carolina: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental... authorization of the changes to its hazardous waste program under the Resource Conservation and Recovery Act... Section, RCRA Programs and Materials Management Branch, RCRA Division, U.S. Environmental Protection...

Material properties of Bohunice 1 and 2 reactor pressure vessel materials before and after annealing

International Nuclear Information System (INIS)

Brumovsky, M.; Novosad, P.; Vacek, M.

1994-01-01

Six types of experimental RPV materials were studied before and after irradiation in host nuclear power and research reactors. Recovery of RPV materials from radiation hardening and embrittlement after annealing was evaluated including a rate of radiation damage after reirradiation used. (author). 3 refs, 4 figs, 2 tabs

Ceramic piezoelectric materials

International Nuclear Information System (INIS)

Kaszuwara, W.

2004-01-01

Ceramic piezoelectric materials conert reversibility electric energy into mechanical energy. In the presence of electric field piezoelectric materials exhibit deformations up to 0.15% (for single crystals up to 1.7%). The deformation energy is in the range of 10 2 - 10 3 J/m 3 and working frequency can reach 10 5 Hz. Ceramic piezoelectric materials find applications in many modern disciplines such as: automatics, micromanipulation, measuring techniques, medical diagnostics and many others. Among the variety of ceramic piezoelectric materials the most important appear to be ferroelectric materials such as lead zirconate titanate so called PZT ceramics. Ceramic piezoelectric materials can be processed by methods widely applied for standard ceramics, i.e. starting from simple precursors e.g. oxides. Application of sol-gel method has also been reported. Substantial drawback for many applications of piezoelectric ceramics is their brittleness, thus much effort is currently being put in the development of piezoelectric composite materials. Other important research directions in the field of ceramic piezoelectric materials composite development of lead free materials, which can exhibit properties similar to the PZT ceramics. Among other directions one has to state processing of single crystals and materials having texture or gradient structure. (author)

FOREWORD: Materials metrology Materials metrology

Science.gov (United States)

Bennett, Seton; Valdés, Joaquin

2010-04-01

calibration of the various instruments and standards used but also the reliable application of an accepted measurement procedure. Nowhere is this more evident than in the use of hardness scales, which are not directly traceable to the SI. This special issue of Metrologia includes a summary of the findings and conclusions of the Working Group and a further 14 papers covering the full range of properties of interest in science, engineering and standards making. It includes papers by authors at eight national measurement institutes and four other research centres. In addition to mechanical properties, there are papers addressing issues associated with the measurement of electromagnetic, acoustic and optical properties as well as those arising from the specific structural features of many new materials. As guest editors, we are extremely grateful to all the authors who have contributed to this special issue on the measurement of the properties of materials. We hope it will contribute to a wider appreciation of many of the associated issues and foster a growing understanding of the importance of ensuring that all such measurements are performed in accordance with accepted standards and procedures, with proper attention to the need to establish the traceability of the results. Only in this way can the performance, safety and fitness for purpose of products be guaranteed.

Electrogelation of Biopolymers for New Functional Materials

Science.gov (United States)

2013-08-31

TERMS silk , materials, electrogelation, egeJ.. biopolymers , tropoelastin 1.8. SECURITY CLASSIFICATION OF: 17. UMITATION OF a. REPORT b. ABSTRACT c...additional biopolymers with utility to exploit the egel process. We have focused on the silk and tropoelastin systems due to our ability to genetically...of Biopolymers for New Functional Materials 5b. GRANT NUMBER FA9550-10-1-0172 Sc. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER Kaplan

SCRUTINIZING TRUST IN AUTHORITIES AND POWER OF AUTHORITIES AS FACETS SHAPING THE MEDITERRANEAN TAX CLIMATE

Directory of Open Access Journals (Sweden)

LARISSA BǍTRÂNCEA

2014-06-01

Full Text Available Tax literature acknowledges that trust in authorities and power of authorities, as grassroots dimensions of the “slippery slope framework”, influence compliance behavior. The present material assesses the framework’s main dimensions in the case of the Mediterranean tax climate (i.e., Cyprus, Greece, Italy, Portugal and Spain by a manifold of economic, financial and psychological variables. The proposed rationale, including World Bank governance indicators (government effectiveness, rule of law, regulatory quality, control for corruption as proxies for the framework’s dimensions, analyses of chain base indexes with respect to economic performance (calculations involving GDP per capita, quantitative evaluation of tax compliance burden and cost of taxation (calculations involving Paying Taxes reports, aims at raising awareness among policy makers and citizens about relevance of trust and power for compliance behavior within the Mediterranean tax climate. Multidisciplinary estimations of trust and power may constitute a benchmark for decision makers in appraising the effects generated by the measures countervailing crises and in designing strategies to hinder future undesirable economic bouts.

Technical Memory 2008. Nuclear Regulatory Authority

International Nuclear Information System (INIS)

2011-01-01

The technical memory 2008 of the Nuclear Regulatory Authority of Argentine Republic, compile the papers published in the subject on radiation protection and nuclear safety, and presented in journals, technical reports, congress or meetings of these specialties by personnel of the mentioned institution during 2008. In this edition the documents are presented on: environmental protection; transport of radioactive materials; regulations; research reactors and nuclear power plants; biological radiation effects; therapeutic uses of ionizing radiation and radioprotection of patients; internal dosimetry; physical dosimetry; knowledge management; radioactive waste management. [es

The preventing of illicit trafficking of radioactive materials in Estonia

International Nuclear Information System (INIS)

Velbri, T.; Aasmann, L.

1998-01-01

This paper explains the situation of legislation, practical border-control and equipment of different relevant authorities dealing with the control of radioactive materials in Estonia. The overview of legislation concerning radiation and radiation protection is given. The roles of Estonian Customs Authority, Estonian border Guard, National Rescue Board and Police Authority in the preventing of illicit trafficking of radioactive materials are shown. The incidents of illicit trafficking of radioactive materials are listed. Also the most important border-crossing points and the types of equipment used there are shown. Finally the problems of controlling the borders in Estonia and the future plans in order to make the controlling system more efficient are discussed. (author)

New materials options for nuclear systems

International Nuclear Information System (INIS)

Jones, R.H.; Garner, F.A.; Bruemmer, S.M.; Gelles, D.S.

1989-01-01

Development of new materials for nuclear reactor systems is continuing to produce options for improved reactor designs. Materials with reduced environment-induced crack growth is a key materials issue for the light water reactor (LWR) industry while the development of low activation ferritic, austenitic and vanadium alloys has been an active area for materials development for fusion reactor structural applications. Development of advanced materials such as metal matrix and ceramic matrix composites for reactor systems have received a limited amount of attention. (author)

Calibration of thermoluminiscent materials

International Nuclear Information System (INIS)

Bos, A.J.J.

1989-07-01

In this report the relation between exposure and absorbed radiation dose in various materials is represented, on the base of recent data. With the help of this a calibration procedure for thermoluminescent materials, adapted to the IRI radiation standard is still the exposure in rontgen. In switching to the air kerma standard the calibration procedure will have to be adapted. (author). 6 refs.; 4 tabs

Hybrid and hierarchical composite materials

CERN Document Server

Kim, Chang-Soo; Sano, Tomoko

2015-01-01

This book addresses a broad spectrum of areas in both hybrid materials and hierarchical composites, including recent development of processing technologies, structural designs, modern computer simulation techniques, and the relationships between the processing-structure-property-performance. Each topic is introduced at length with numerous  and detailed examples and over 150 illustrations.   In addition, the authors present a method of categorizing these materials, so that representative examples of all material classes are discussed.

Variation of radon exhalation on building materials

International Nuclear Information System (INIS)

Liu Fudong; Liu Senlin; Wang Chunhong; Pan Ziqiang; Zhang Yonggui; Ji Dong

2009-01-01

The 19 samples from different building material factories were collected for four kinds of building materials. The activity concentration and radon exhalation of building materials were measured. The radon exhalations of building materials are not obviously different if the component is same and the processes of building materials are similar. However, the radon exhalations of same kind of building material are greatly different if the components are different and the processes of building material are varied even if the activity concentrations of building material are similar. (authors)

Material physical properties of 11Cr-ferritic/martensitic steel (PNC-FMS) wrapper tube materials

International Nuclear Information System (INIS)

Yano, Yasuhide; Kaito, Takeji; Ohtsuka, Satoshi; Tanno, Takashi; Uwaba, Tomoyuki; Koyama, Shinichi

2012-09-01

It is necessary to develop core materials for fast reactors in order to achieve high-burnup. Ferritic steels are expected to be good candidate core materials to achieve this objective because of their excellent void swelling resistance. Therefore, oxide dispersion strengthened (ODS) ferritic steel and 11Cr-ferritic/martensitic steel (PNC-FMS) have been respectively developed for cladding and wrapper tube materials in Japan Atomic Energy Agency. In this study, various physical properties of PNC-FMS wrapper materials were measured and equations and future standard measurement technique of physical properties for the design and evaluation were conducted. (author)

Continuum mechanics of anisotropic materials

CERN Document Server

Cowin, Stephen C

2013-01-01

Continuum Mechanics of Anisotropic Materials(CMAM) presents an entirely new and unique development of material anisotropy in the context of an appropriate selection and organization of continuum mechanics topics. These features will distinguish this continuum mechanics book from other books on this subject. Textbooks on continuum mechanics are widely employed in engineering education, however, none of them deal specifically with anisotropy in materials. For the audience of Biomedical, Chemical and Civil Engineering students, these materials will be dealt with more frequently and greater accuracy in their analysis will be desired. Continuum Mechanics of Anisotropic Materials' author has been a leader in the field of developing new approaches for the understanding of anisotropic materials.

Effects of Students' Participation in Authoring of Multimedia Materials on Student Acquisition of Vocabulary.

Science.gov (United States)

Nikolova, Ofelia R.

2002-01-01

Investigated the effects on vocabulary acquisition of student participation in authoring a multimedia institutional module. Sixty-two subjects were randomly assigned to two groups, and each group was randomly assigned to one of two treatments. Showed evidence that students learn vocabulary significantly better when they participate in the creation…

International conventions for measuring radioactivity of building materials

International Nuclear Information System (INIS)

Tan Chenglong

2004-01-01

In buildings, whether civil or industrial, natural radioactivity always occurs at different degrees in the materials (main building materials, decorative materials). Concerns on radioactivity from building materials is unavoidable for human living and developing. As a member of WTO, China's measuring method of radioactivity for building materials, including radionuclides limitation for building materials, hazard evaluation system etc, should keep accordance with the international rules and conventions. (author)

Transport of radioactive materials

International Nuclear Information System (INIS)

1991-07-01

The purpose of this Norm is to establish, relating to the TRANSPORT OF RADIOACTIVE MATERIALS, safety and radiological protection requirements to ensure an adequate control level of the eventual exposure of persons, properties and environment to the ionizing radiation comprising: specifications on radioactive materials for transport; package type selection; specification of the package design and acceptance test requirements; arrangements relating to the transport itself; administrative requirements and responsibilities. (author)

Thermoluminescence dosimetry materials: properties and uses

International Nuclear Information System (INIS)

McKeever, S.W.S.; Moscovitch, M.; Townsend, P.D.

1995-01-01

This book selects a range of the most popular thermoluminescence dosemeter (TLD) materials in use today and provides a critical account of their thermoluminescence (TL) and dosimetric properties. The information provided includes in-depth discussions of TL mechanisms, including an account of luminescence properties, and relevant information regarding dosimetric characteristics. The book is intended for those involved in TLD materials research, and for technicians and workers involved in the practical application of these materials in TL dosimetry. The advent of modern spectroscopic methods for measuring TL emission spectra (the so-called ''3-D'' presentation) seemed to the authors to be an invitation to compile such spectra for all the major TLD materials. Further consideration led to an expansion of the initial idea to include a compilation of dosimetric properties. One intention is to provide a synopsis of the TL and dosimetric properties of the most widely used TLD materials currently available and to form a link between the solid state defect properties of these materials and their actual dosimetric properties. A second intention is to provide a solid framework from which future studies of TLD materials could be launched. Too often in the past research into TLD materials has been haphazard, to say the least. By illustrating the links between solid state physics and the radiation dosimetry properties of these materials the book points to the future and to the pressing need for enhanced research on TLD materials. (Author)

Structural materials for fusion reactors

International Nuclear Information System (INIS)

Victoria, M.; Baluc, N.; Spaetig, P.

2001-01-01

In order to preserve the condition of an environmentally safe machine, present selection of materials for structural components of a fusion reactor is made not only on the basis of adequate mechanical properties, behavior under irradiation and compatibility with other materials and cooling media, but also on their radiological properties, i.e. activity, decay heat, radiotoxicity. These conditions strongly limit the number of materials available to a few families of alloys, generically known as low activation materials. We discuss the criteria for deciding on such materials, the alloys resulting from the application of the concept and the main issues and problems of their use in a fusion environment. (author)

Transport of radioactive materials

International Nuclear Information System (INIS)

Huck, W.

1992-01-01

The book presents a systematic survey of the legal provisions governing the transport of radioactive materials, placing emphasis on the nuclear licensing provisions of sections 4, 4b of the Atomic Energy, Act (AtG) and sections 8-10 of the Radiation Protection Ordinance (StrlSchV), also considering the provisions of the traffic law governing the carriage of hazardous goods. The author's goal is to establish a systematic basis by comparative analysis of the licensing regulations under atomic energy law, for the purpose of formulating a proposed amendment to the law, for the sake of clarity. The author furthermore looks for and develops criteria that can be of help in distinguishing the regulations governing the carriage of hazardous goods from the nuclear regulatory provisions. He also examines whether such a differentiation is detectable, particularly in those amendments to the StrlSchV which came after the Act on Carriage of Hazardous Goods. The regulations governing the transport of radioactive materials under the AtG meet with the problem of different classification systems being applied, to radioactive materials in the supervisory regulations on the one hand, and to nuclear materials in Annex 1 to the AtG on the other hand. A classification of natural, non-nuclear grade uranium e.g. by the financial security provisions is difficult as a result of these differences in the laws. The author shows that the transport regulations of the StrlSchV represent an isolated supervisory instrument that has no connecting factor to the sections 28 ff StrlSchV, as radiation protection is provided for by the regulations of the Act on Carriage of Hazardous Goods. The author suggests an amendment of existing law incorporating the legal intent of sections 8-10 StrlSchV and of sections 4, 4b AtG into two sections, and abolishing the supervisory provisions of the StrlSchV altogether. (orig./HP) [de

Hydrogen storage by carbon materials synthesized from oil seeds and fibrous plant materials

Energy Technology Data Exchange (ETDEWEB)

Sharon, Maheshwar; Bhardwaj, Sunil; Jaybhaye, Sandesh [Nanotechnology Research Center, Birla College, Kalyan 421304 (India); Soga, T.; Afre, Rakesh [Graduate School of Engineering, Nagoya Institute of Technology, Nagoya (Japan); Sathiyamoorthy, D.; Dasgupta, K. [Powder Metallurgy Division, BARC, Trombay 400 085 (India); Sharon, Madhuri [Monad Nanotech Pvt. Ltd., A702 Bhawani Tower, Powai, Mumbai 400 076 (India)

2007-12-15

Carbon materials of various morphologies have been synthesized by pyrolysis of various oil-seeds and plant's fibrous materials. These materials are characterized by SEM and Raman. Surface areas of these materials are determined by methylene blue method. These carbon porous materials are used for hydrogen storage. Carbon fibers with channel type structure are obtained from baggas and coconut fibers. It is reported that amongst the different plant based precursors studied, carbon from soyabean (1.09 wt%) and baggas (2.05 wt%) gave the better capacity to store hydrogen at 11kg/m{sup 2} pressure of hydrogen at room temperature. Efforts are made to correlate the hydrogen adsorption capacity with intensities and peak positions of G- and D-band obtained with carbon materials synthesized from plant based precursors. It is suggested that carbon materials whose G-band is around 1575cm{sup -1} and the intensity of D-band is less compared to G-band, may be useful material for hydrogen adsorption study. (author)

Nuclear Regulatory Authority of the Slovak Republic. Annual Report 1999

International Nuclear Information System (INIS)

Seliga, M.

2000-01-01

A brief account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic in 1999 is presented. These activities are reported under the headings: (1) Foreword; (2) Mission of the Nuclear Regulatory Authority; (3) Legislation; (4) Assessment and inspection of safety at nuclear installations; (4) Safety analyses; (5) Nuclear materials; (6) Radioactive waste; (7) Quality assurance; (8) Personnel qualification and training; (9) Emergency preparedness; (10) International co-operation; (11) Public information; (12) Conclusions; (13) Appendices: Economic and personnel data; Abbreviations; The International nuclear event scales - INES

Concepts of IAEA nuclear materials accounting

International Nuclear Information System (INIS)

Oakberg, John A.

2001-01-01

The paper describes nuclear material accounting from the standpoint of IAEA Safeguards and how this accounting is applied by the Agency. The basic concepts of nuclear material accounting are defined and the way these apply to States with INFCIRC/153-type safeguards agreements is presented. (author)

The ecology of primate material culture.

Science.gov (United States)

Koops, Kathelijne; Visalberghi, Elisabetta; van Schaik, Carel P

2014-11-01

Tool use in extant primates may inform our understanding of the conditions that favoured the expansion of hominin technology and material culture. The 'method of exclusion' has, arguably, confirmed the presence of culture in wild animal populations by excluding ecological and genetic explanations for geographical variation in behaviour. However, this method neglects ecological influences on culture, which, ironically, may be critical for understanding technology and thus material culture. We review all the current evidence for the role of ecology in shaping material culture in three habitual tool-using non-human primates: chimpanzees, orangutans and capuchin monkeys. We show that environmental opportunity, rather than necessity, is the main driver. We argue that a better understanding of primate technology requires explicit investigation of the role of ecological conditions. We propose a model in which three sets of factors, namely environment, sociality and cognition, influence invention, transmission and retention of material culture. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Emergency group of the Commisariat a l'energie atomique for supplying help demanded by state authorities

International Nuclear Information System (INIS)

Penneroux, J.

1998-01-01

In the frame of its obligations required by the state authority, the CEA has set up an organisation and intervention means for any needed assistance to responsible authority in case of radiological emergency. In order to be able to answer to any assistance demand of a custom-house officer an agreement has also been found and signed between the French customs and the CEA for the control of radioactive materials and contaminated substances. This paper presents the organisation set up by CEA to face critical conditions out of his own nuclear centers and specially in case of detection by the customs of unauthorized illicit domestic movement of radioactive materials. (author)

Objectives and actions of Public Health Authorities in external radiological emergency

International Nuclear Information System (INIS)

Herrera V, L.; Aguilar P, M.C.

1991-01-01

Here are discussed actions and objectives that the public health authorities could think about uncontrolled liberation of radioactive materials. The approaches on the more convenient actions to continue are established upon assimilating the Chernobyl experience. We will enumerate problems that, they could arise with the foregone actions in order to diminish the population detriment. In the face of the uncontrolled liberation of radioactive material in the Nuclear power plant of Laguna Verde, Veracruz, classified like external radiological emergency, the objective of these serious authorities reduce the deleterious effect to the health of the inhabitants around the CNLV, due to the radioactive material liberated to the atmosphere. In consequence, it is necessary carry out actions of protection for the population affected directly by the external irradiation, for the contamination deposited on inhabited areas, cultivation zones, shepherding, manufacturing and farms. The early actions or immediate are in order to limit deterministic damages to the population and give attendance to people with radio lesions. And the intermediate or they of recuperation are in order to maintain for under an acceptable value the risk to the population due to radiation stochastic effects. In the recuperation phase the plan of water and foods control should consider: foods destined to the self consume in the affected region for the liberation and foods processed for the sale or exportation. We will discuss the stage in a mediate phase after the evacuation of the population. The general tasks could be: 1. Actions in order to impede the contamination propagation. 2. Sampling of waters and foods, contamination situation and its quantification. And acceptance quality in elaborated foods. 3. Safeguard of the material and polluted areas. 4. Election of the actions to continue in function of the reference levels and the comparison of the risk of several alternatives. (Author)

New ceramic materials

International Nuclear Information System (INIS)

Moreno, R.; Dominguez-Rodriguez, A.

2010-01-01

This article is to provide a new ceramic materials in which, with a control of their processing and thus their microstructural properties, you can get ceramic approaching ever closer to a metal, both in its structural behavior at low as at high temperatures. (Author) 30 refs.

Author Guidelines

Directory of Open Access Journals (Sweden)

Chief Editor

2016-06-01

-only material should be submitted and sent for peer review simultaneously with the primary manuscript. 2. Reporting GuidelinesReporting guidelines have been developed for different study designs; examples include CONSORT for randomized trials, STROBE for observational studies, PRISMA for systematic reviews and meta-analyses, and STARD for studies of diagnostic accuracy. Journals are encouraged to ask authors to follow these guidelines because they help authors describe the study in enough detail for it to be evaluated by editors, reviewers, readers, and other researchers evaluating the medical literature. Authors of review manuscripts are encouraged to describe the methods used for locating, selecting, extracting, and synthesizing data; this is mandatory for systematic reviews. Good sources for reporting guidelines are the EQUATOR Network and the NLM's Research Reporting Guidelines and Initiatives. 3. Manuscript SectionsThe following are general requirements for reporting within sections of all study designs and manuscript formats. a. Title Page General information about an article and its authors is presented on a manuscript title page and usually includes the article title, author information, any disclaimers, sources of support, word count, and sometimes the number of tables and figures. Article title. The title provides a distilled description of the complete article and should include information that, along with the Abstract, will make electronic retrieval of the article sensitive and specific. Reporting guidelines recommend and some journals require that information about the study design be a part of the title (particularly important for randomized trials and systematic reviews and meta-analyses. Some journals require a short title, usually no more than 40 characters (including letters and spaces on the title page or as a separate entry in an electronic submission system. Electronic submission systems may restrict the number of characters in the title. Author

Sürdürülebilir Kalkınma İçin Türkiye’de Düşük Karbon Ekonomisi ve Kyoto Protokolü’nün Finansman Kaynakları / Low Carbon Economy and Financial Sources of The Kyoto Protocol for Sustainable Development In Turkey

Directory of Open Access Journals (Sweden)

Mehmet Ragıp BAYRAK

2012-12-01

Full Text Available Dünya kamuoyu bugünlerde uluslararası iklim değişimi rejiminin, sera gazlarının salımına kısıtlamalar getiren Kyoto Protokolü’nün sona ereceği 2012 yılı sonrasını ve emisyon azaltımı adına net hedefler ortaya koymayan Kopenhag Uzlaşması’nın sonuçlarını tartışmaktadır. Düşük karbon ekonomisi modelinin temellerini oluşturan ve serbest piyasa ekonomisi mekanizması içerisinde çözüm arayan Temiz Kalkınma Mekanizması (CDM, Ortak Uygulama (JI ve Emisyon Ticareti (ET gibi Kyoto Protokolü uygulamalarının 2012 sonrasındaki durumu da belirsizdir. Kyoto Protokolü, iklim değişimi ile mücadelenin ve düşük karbon ekonomisine geçişin yollarını devlet müdahaleciliğinden çok serbest piyasa ekonomisi mekanizması içerisinde aramaktadır ve sorunun global boyutuna vurgu yapmaktadır. Sürdürülebilir ekonomik kalkınma sürecinin sağlıklı bir şekilde geliştirilmesi ve yürütülmesi gelişmekte olan ülkeler arasında yer alan Türkiye için de önem arz etmektedir ancak ülkemizin bu konuda yeterli gelişmeyi gösterdiği söylenemez. Bu çalışmada Kyoto Protokolü’nün piyasa temelli finansman kaynakları incelenmiş ve Türkiye’de düşük karbon ekonomisi modeline geçiş sürecinin durumu ve bu süreçte ilgili finansman kaynaklarının yeri araştırılmıştır. Ayrıca iklim değişikliği rejiminin 2012 yılında sona erecek ilk yükümlülük dönemi sonrası alacağı şekle ilişkin işleyen süreçte gelişmekte olan ülkelerin de emisyon indiriminden sorumlu tutulması gerektiğine ve bu yolla karbon piyasalarında işlem hacminin artması gerektiği sonucuna ulaşılmıştır. Low Carbon Economy and Financial Sources of The Kyoto Protocol for Sustainable Development In Turkey The World public opinion currently discusses uncertainty of the Post - Kyoto negotiations because The Copenhagen Summit held to talk about Post-Kyoto period on December 2009 still has no clear targets

'Material unaccounted for' (MUF)

International Nuclear Information System (INIS)

1977-01-01

MUF is an item of importance in materials accounting measures now embodied in international safeguard arrangements, and in recent public debates requests have been made that the figures for MUF appearing in the Atomic Energy Authority and British Nuclear Fuels Ltd. records should be published. Joint statements issued by the UKAEA and BNFL in July 1977 are here published. These statements describe the procedures for nuclear materials accounting at AEA and BNFL sites and the nature of the inventory differences (MUF) that arise in all nuclear materials accounting operations. Figures for highly enriched U and Pu are included. (U.K.)

Developments related to the National Nuclear Safety Authority of Romania

International Nuclear Information System (INIS)

Baciu, Florin

1998-01-01

The contribution presents the status of the National Commission for Nuclear Activity Control (CNCAN) as indicated by the provisions of a Romanian Government Decision of May 1998. As specified in the art.3 the main tasks of the Commission are the following: to issue authorization and exercise permits of activities in nuclear field; to supervise the applications of the provisions stipulated by the law concerning development in safety conditions of nuclear activities; to develop instructions as well as nuclear safety regulations to ensure the quality assurance and functioning in safety conditions of the nuclear facilities and plants, the protection against nuclear radiation of the professionally exposed personnel, of the population, of the environment and of the material goods, the physical protection, the records, preservation and transport of radioactive material and of fissionable materials as well as the management of radioactive waste; organizes expert and is responsible for the state control concerning the integrated application of the law provisions in the field of quality constructions in which nuclear installations of national interest are located, during all the phases and for all the components of the quality system in this field; issues specialty and information documentation specific to its own activity, provides the information of the public through official publication, official statements to the press and other specific form of information; carries out any other tasks provided by law in the field of regulations and control of nuclear activity. Author presents also the CNCAN staff number evolution, the new structure, the staff distribution at headquarters, local agencies and national radiation monitoring network. Finally, the author discusses the legal provisions related to management manual procedures

Carbon/carbon composite materials

International Nuclear Information System (INIS)

Thebault, J.; Orly, P.

2006-01-01

Carbon/carbon composites are singular materials from their components, their manufacturing process as well as their characteristics. This paper gives a global overview of these particularities and applications which make them now daily used composites. (authors)

Foreign material exclusion program

International Nuclear Information System (INIS)

Perez Moreno, J.; Folguera Mateo, M.

2015-01-01

Foreign material is any element that is not part of the system as it has been designed. For example dirt, loose parts, wires, chips, etc. that may affect the operation of the system or component. (Author)

The French nuclear safety authority's experience with radioactive transport inspection

International Nuclear Information System (INIS)

Jacob, E.; Aguilar, J.

2004-01-01

About 300,000 radioactive material packages are transported annually in France. Most consist of radioisotopes for medical, pharmaceutical or industrial use. On the other hand, the nuclear industry deals with the transport of fuel cycle materials (uranium, fuel assemblies, etc.) and waste from power plants, reprocessing plants and research centers. France is also a transit country for shipments such as spent fuel packages from Switzerland or Germany, which are bound for Sellafield in Great Britain. The French nuclear safety authority (DGSNR: Directorate General for Nuclear Safety and Radioprotection) has been responsible since 1997 for the safety of radioactive material transport. This paper presents DGNSR's experience with transport inspection: a feedback of key points based on 300 inspections achieved during the past five years is given

Acupuncture and related therapies used as add-on or alternative to prokinetics for functional dyspepsia: overview of systematic reviews and network meta-analysis.

Science.gov (United States)

Ho, Robin S T; Chung, Vincent C H; Wong, Charlene H L; Wu, Justin C Y; Wong, Samuel Y S; Wu, Irene X Y

2017-09-04

Prokinetics for functional dyspepsia (FD) have relatively higher number needed to treat values. Acupuncture and related therapies could be used as add-on or alternative. An overview of systematic reviews (SRs) and network meta-analyses (NMA) were performed to evaluate the comparative effectiveness of different acupuncture and related therapies. We conducted a comprehensive literature search for SRs of randomized controlled trials (RCTs) in eight international and Chinese databases. Data from eligible RCTs were extracted for random effect pairwise meta-analyses. NMA was used to explore the most effective treatment among acupuncture and related therapies used alone or as add-on to prokinetics, compared to prokinetics alone. From five SRs, 22 RCTs assessing various acupuncture and related therapies were included. No serious adverse events were reported. Two pairwise meta-analyses showed manual acupuncture has marginally stronger effect in alleviating global FD symptoms, compared to domperidone or itopride. Results from NMA showed combination of manual acupuncture and clebopride has the highest probability in alleviating patient reported global FD symptom. Combination of manual acupuncture and clebopride has the highest probability of being the most effective treatment for FD symptoms. Patients who are contraindicated for prokinetics may use manual acupuncture or moxibustion as alternative. Future confirmatory comparative effectiveness trials should compare clebopride add-on manual acupuncture with domperidone add-on manual acupuncture and moxibustion.

Verifying the Relative Efficacy between Continuous Positive Airway Pressure Therapy and Its Alternatives for Obstructive Sleep Apnea: A Network Meta-analysis

Directory of Open Access Journals (Sweden)

Tingwei Liu

2017-06-01

Full Text Available Obstructive sleep apnea (OSA is a common breathing disorder, and continuous positive airway pressure (CPAP therapy together with its alternatives has been developed to treat this disease. This network meta-analysis (NMA was aimed to compare the efficacy of treatments for OSA. Cochrane Library, MEDLINE, and Embase were searched for eligible studies. A conventional and NMA was carried out to compare all therapies. Sleeping characteristics, including Apnea–Hypopnea Index (AHI, Epworth Sleepiness Scale (ESS, arterial oxygen saturation, and arousal index (AI, and changes of blood pressure were selected as outcomes. A total of 84 studies were finally included after rigorous screenings. For the primary outcomes of AHI and ESS, the value of auto-adjusting positive airway pressure (APAP, CPAP, and oral appliance (OA all showed statistically reduction compared with inactive control (IC. Similar observation was obtained in AI, with treatments of the three active interventions. A lower effect of IC in SaO2 was exhibited when compared with APAP, CPAP, and OA. Similar statistically significant results were presented in 24 h systolic blood pressure and 24 h DBP when comparing with CPAP. Our NMA identified CPAP as the most efficacious treatment for OSA patients after the evaluation of sleeping characteristics and blood pressures. In addition, more clinical trials are needed for further investigation due to the existence of inconsistency observed in this study.

Incidence and Pattern of Graft-versus-Host Disease in Patients Undergoing Allogeneic Transplantation after Nonmyeloablative Conditioning with Total Lymphoid Irradiation and Antithymocyte Globulin

Directory of Open Access Journals (Sweden)

Lauren Veltri

2013-01-01

Full Text Available Nonmyeloablative (NMA conditioning with total lymphoid irradiation and antithymocyte globulin (TLI/ATG has been shown to protect against acute graft-versus-host disease (GVHD. We report here our institutional experience with allogeneic transplantation following NMA conditioning with TLI/ATG (. GVHD prophylaxis consisted of a combination of a calcineurin inhibitor and mycophenolate mofetil. Median patient age was 59 years. The median followup of surviving patients is 545 days. One patient experienced primary graft rejection. The median time to neutrophil engraftment was 18 days and platelet engraftment was 9.5 days. The cumulative incidence (CI of grade II–IV acute GVHD at day +100 was 28.6% and 38.1% at day +180. The CI for grade III-IV acute GVHD was 28.6% at day +180. CI of chronic GVHD was 45.2% at 1 year. The CI of disease relapse was 9.5% at 1 year. The rate of nonrelapse mortality (NRM was 0% at day +100 and only 9.5% at 1 year. The overall and progression free survival at 1 year was 81% and 80.4%, respectively. Our limited, retrospective data show encouraging relapse and NRM rates with TLI/ATG-based NMA conditioning, but with higher than previously reported rates of acute and chronic GVHD, underscoring the need for novel strategies designed to effectively prevent GVHD.

Current investigations of packaging materials used for food irradiation

International Nuclear Information System (INIS)

Fiszer, W.

1996-01-01

The article reviews current investigations of packaging materials applied for food irradiation. The increasing role of various synthetic materials is described. Author reviews radiation-induced damages in these materials. The article includes the list of materials accepted for food packaging and subsequent irradiation with different doses

Anthropogenic materials and products containing natural radionuclides. Pt. 1a. Radiation properties of raw materials and waste materials. A literature study

International Nuclear Information System (INIS)

Reichelt, A.; Roehrer, J.; Lehmann, K.H.

1995-12-01

Cased on the literature study, the publication presents relevant data on raw materials and wastes containing natural radionuclides. The study is part 1a of the project on ''Anthropogenic materials and waste materials containing natural radionuclides''. Part 1 of the project gives data and information on about 100 different materials and wastes or products for household or industrial applications which contain significant amounts of natural radioactivity. In addition, part 1 presents for some of these materials information on their applications, consumption, radioactivity and resulting radiation doses. The raw materials and waste materials on the list in part 1 are characterised in this 1a report. Wherever appropriate, two or more materials are dealt with in one chapter, as e.g. felspar and felspar sands (pegmatite), talcum, and soapstone. The wastes are dealt with in the chapters discussing the relevant raw materials. The information given is as derived from the literature and does not include comments or evaluation by the authors of this report. Whenever the literature study did not yield information on radiological aspects of a material on the list, an appropriate notice is given. (Orig./DG) [de

Physical foundations of materials science

CERN Document Server

Gottstein, Günter

2004-01-01

In this vivid and comprehensible introduction to materials science, the author expands the modern concepts of metal physics to formulate basic theory applicable to other engineering materials, such as ceramics and polymers. Written for engineering students and working engineers with little previous knowledge of solid-state physics, this textbook enables the reader to study more specialized and fundamental literature of materials science. Dozens of illustrative photographs, many of them Transmission Electron Microscopy images, plus line drawings, aid developing a firm appreciation of this complex topic. Hard-to-grasp terms such as "textures" are lucidly explained - not only the phenomenon itself, but also its consequences for the material properties. This excellent book makes materials science more transparent.

Authoring Tools

Science.gov (United States)

Treviranus, Jutta

Authoring tools that are accessible and that enable authors to produce accessible Web content play a critical role in web accessibility. Widespread use of authoring tools that comply to the W3C Authoring Tool Accessibility Guidelines (ATAG) would ensure that even authors who are neither knowledgeable about nor particularly motivated to produce accessible content do so by default. The principles and techniques of ATAG are discussed. Some examples of accessible authoring tools are described including authoring tool content management components such as TinyMCE. Considerations for creating an accessible collaborative environment are also covered. As part of providing accessible content, the debate between system-based personal optimization and one universally accessible site configuration is presented. The issues and potential solutions to address the accessibility crisis presented by the advent of rich internet applications are outlined. This challenge must be met to ensure that a large segment of the population is able to participate in the move toward the web as a two-way communication mechanism.

Becoming Co-Authors: Toward Sharing Authority in Religious Education

Science.gov (United States)

Kim, Hyun-Sook

2009-01-01

This article offers an alternative model, the model of shared authority, to the traditional, authoritarian model for authority and obedience for Religious Education. This model moves away from the authoritarian model of a teacher as the authority and the students as obedient listeners in the direction of a shared authority model in which teachers…

Magnetic materials. Properties and applications

International Nuclear Information System (INIS)

Bar'yakhtar, V.

1998-01-01

Main theoretical and experimental results of physics of magnetic materials have been stated. Special attention was paid to the problem of creation of magnetic materials for information recording and presentation. The results of fundamental researches have been considered for their effect on creation of magnetic materials with the properties required for production as well as the reverse effect of production financing on the development of fundamental investigations. The relations between the development of high technologies and the society requirements, financing volumes and the level of NIKOR. (author)

Security of radioactive sources and materials

International Nuclear Information System (INIS)

Rodriguez, C.; D'Amato, E.; Fernandez Moreno, S.

1998-01-01

The activities involving the use of radiation sources and radioactive materials are subject to the control of the national bodies dedicated to the nuclear regulation. The main objective of this control is to assure an appropriate level of radiological protection and nuclear safety. In Argentina, this function is carried out by the 'Nuclear Regulatory Authority' (ARN) whose regulatory system for radiation sources and radioactive materials comprises a registration, licensing and inspection scheme. The system is designed to keep track of such materials and to allow taking immediate corrective actions in case some incident occurs. Due to the appearance of a considerable number of illicit traffic events involving radiation sources and radioactive materials, the specialized national and international community has begun to evaluate the adoption of supplementary measures to those of 'safety' guided to its prevention and detection (i.e. 'security measures'). This paper presents a view on when the adoption of complementary 'security' measures to those of 'safety' would be advisable and which they would be. This will be done through the analysis of two hypothesis of illicit traffic, the first one with sources and radioactive materials considered as 'registered' and the second, with the same materials designated as 'not registered'. It will also describe succinctly the measures adopted by the ARN or under its analysis regarding the 'security' measures to sources and radioactive materials. (author)

Radioactive certified reference materials

International Nuclear Information System (INIS)

Watanabe, Kazuo

2010-01-01

Outline of radioactive certified reference materials (CRM) for the analysis of nuclear materials and radioactive nuclides were described. The nuclear fuel CRMs are supplied by the three institutes: NBL in the US, CETAMA in France and IRMM in Belgium. For the RI CRMs, the Japan Radioisotope Association is engaged in activities concerning supply. The natural-matrix CRMs for the analysis of trace levels of radio-nuclides are prepared and supplied by NIST in the US and the IAEA. (author)

Classification of scrap material from nuclear power plants as acceptable for recirculation

International Nuclear Information System (INIS)

Bergman, C.

1983-06-01

The Swedish National Institute of Radiation Protection has in a principal decision accepted that scrap material from nuclear power plants, that contains or may contain radioactive material, can be recirculated. The document is an English translation of the background material for the Board meeting decision and gives some guide-lines for the authority when dealing with this questions. (author)

A Network Meta-Analysis of the Relative Efficacy of Treatments for Actinic Keratosis of the Face or Scalp in Europe

Science.gov (United States)

Vegter, Stefan; Tolley, Keith

2014-01-01

Background Several treatments are available for actinic keratosis (AK) on the face and scalp. Most treatment modalities were compared to placebo and therefore little is known on their relative efficacy. Objectives To compare the different treatments for mild to moderate AK on the face and scalp available in clinical practice in Europe. Methods A network meta-analysis (NMA) was performed on the outcome “complete patient clearance”. Ten treatment modalities were included: two 5-aminolaevulinic acid photodynamic therapies (ALA-PDT), applied as gel (BF-200 ALA) or patch; methyl-aminolevulinate photodynamic therapy (MAL-PDT); three modalities with imiquimod (IMI), applied as a 4-week or 16-week course with 5% imiquimod, or a 2–3 week course with 3.75% imiquimod; cryotherapy; diclofenac 3% in 2.5% hyaluronic acid; 0.5% 5-fluorouracil (5-FU); and ingenol mebutate (IMB). The only data available for 5% 5-FU was from one small study and was determined to be too limited to be reliably included in the analysis. For BF-200 ALA and MAL-PDT, data from illumination with narrow-band lights were selected as these are typically used in clinical practice. The NMA was performed with a random-effects Bayesian model. Results 25 trials on 5,562 patients were included in the NMA. All active treatments were significantly better than placebo. BF-200 ALA showed the highest efficacy compared to placebo to achieve total patient clearance. BF-200 ALA had the highest probability to be the best treatment and the highest SUCRA score (64.8% and 92.1%), followed by IMI 5% 4 weeks (10.1% and 74.2%) and 5-FU 0.5% (7.2% and 66.8%). Conclusions This NMA showed that BF-200 ALA, using narrow-band lights, was the most efficacious treatment for mild to moderate AK on the face and scalp. This analysis is relevant for clinical decision making and health technology assessment, assisting the improved management of AK. PMID:24892649

Solvent Effects on Oxygen-17 Chemical Shifts in Amides. Quantitative Linear Solvation Shift Relationships

Science.gov (United States)

Díez, Ernesto; Fabián, Jesús San; Gerothanassis, Ioannis P.; Esteban, Angel L.; Abboud, José-Luis M.; Contreras, Ruben H.; de Kowalewski, Dora G.

1997-01-01

A multiple-linear-regression analysis (MLRA) has been carried out using the Kamlet-Abboud-Taft (KAT) solvatochromic parameters in order to elucidate and quantify the solvent effects on the17O chemical shifts ofN-methylformamide (NMF),N,N-dimethylformamide (DMF),N-methylacetamide (NMA), andN,N-dimethylacetamide (DMA). The chemical shifts of the four molecules show the same dependence (in ppm) on the solvent polarity-polarizability, i.e., -22π*. The influence of the solvent hydrogen-bond-donor (HBD) acidities is slightly larger for the acetamides NMA and DMA, i.e., -48α, than for the formamides NMF and DMF, i.e., -42α. The influence of the solvent hydrogen-bond-acceptor (HBA) basicities is negligible for the nonprotic molecules DMF and DMA but significant for the protic molecules NMF and NMA, i.e., -9β. The effect of substituting the N-H hydrogen by a methyl group amounts to -5.9 ppm in NMF and 5.4 ppm in NMA. The effect of substituting the O=C-H hydrogen amounts to 5.5 ppm in NMF and 16.8 ppm in DMF. The model of specific hydration sites of amides by I. P. Gerothanassis and C. Vakka [J. Org. Chem.59,2341 (1994)] is settled in a more quantitative basis and the model by M. I. Burgar, T. E. St. Amour, and D. Fiat [J. Phys. Chem.85,502 (1981)] is critically evaluated.17O hydration shifts have been calculated for formamide (FOR) by the ab initio LORG method at the 6-31G* level. For a formamide surrounded by the four in-plane molecules of water in the first hydration shell, the calculated17O shift change due to the four hydrogen bonds, -83.2 ppm, is smaller than the empirical hydration shift, -100 ppm. The17O shift change from each out-of-plane water molecule hydrogen-bonded to the amide oxygen is -18.0 ppm. These LORG results support the conclusion that no more than four water molecules are hydrogen-bonded to the amide oxygen in formamide.

Interaction between thorium and potential clad materials

International Nuclear Information System (INIS)

Kale, G.B.; Gawde, P.S.; Sengupta, Pranesh

2005-01-01

Thorium based fuels are being used for nuclear reactors. The structural stability of fuel-clad assemblies in reactor systems depend upon the nature of interdiffusion reaction between fuel-cladding materials. Interdiffusion reaction thorium and various cladding materials is presented in this paper. (author)

Nuclear Regulatory Authority of the Slovak Republic. Annual Report 2000

International Nuclear Information System (INIS)

Seliga, M.

2001-01-01

A brief account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic in 2000 is presented. These activities are reported under the headings: (1) Foreword and organisation structure; (2) Mission of the Nuclear Regulatory Authority; (3) Legislation; (4) Assessment and inspection of nuclear installations; (5) Safety analyses; (6) Nuclear materials and physical protection of nuclear installations; (7) Radioactive waste; (8) Quality assurance; (9) Personnel qualification and training; (10) Emergency preparedness; (11) International co-operation; (12) Public information; (13) Personnel and economic data of the UJD; (14) Conclusion; (15) Attachments: Abbreviations; Radiation safety

Materials selection for cutting tools

International Nuclear Information System (INIS)

Burkhis, Adel M.

2008-01-01

The selection of proper tool steel for a given application is a difficult task. So; the most important selection factors in choosing cutting tool materials are based on their tool material requirements, cutting tool design and service conditions which is mainly considered as functional requirements. The processability requirements concerns in heat treat ability of the material tool. The classification of these tool materials were discussed with their properties requirement and percent of alloying element which is added to give best properties with a little increase in cost that highly appear in comparison of the selection. The cutting tool materials were evaluated based on two cases; The first was in case of rough surface; the high speed steels is the best material and the other was the ceramic material is the highest performance in cutting of soft or high rate of metal removal. (author)

Establishing exemption and clearance criteria by the regulatory authority

International Nuclear Information System (INIS)

Salih, A.E.A.

2012-04-01

This Project work discusses the relationship between the concepts of exemption and clearance, and their practical use in the overall scheme of regulatory control of practices. It also discusses how exemptions and clearance is established and the scope of its applications for regulatory control. The concept of general clearance levels for any type of material and any possible pathway of disposal is also introduced in this work. Guidance of the Group of Experts establishing scenarios for general clearance, parameter values, and a nuclide-specific list of calculated clearance levels is also presented. Regulatory authorities are required to develop guidance on exemption and clearance levels to assist licensees and registrants to know which practices and sources within practices are exempted from regulatory control and those to be cleared from further controls. Exemption and clearance levels are tools for assisting the Regulatory Authority to optimize the use of resources. (author)

Silicon based light-emitting materials and devices

International Nuclear Information System (INIS)

Chen Weide

1999-01-01

Silicon based light-emitting materials and devices are the key to optoelectronic integration. Recently, there has been significant progress in materials engineering methods. The author reviews the latest developments in this area including erbium doped silicon, porous silicon, nanocrystalline silicon and Si/SiO 2 superlattice structures. The incorporation of these different materials into devices is described and future device prospects are assessed

Author Guidelines

Directory of Open Access Journals (Sweden)

Chief Editor

2015-12-01

Full Text Available Author GuidelinesIJCH strictly adheres on the recommendations for the Conduct, Reporting, Editing and Publication of Scholarly Work in Medical Journals as per the standard universal guidelines given by International Committee of Medical Journal Editors (ICMJE - Recommendations for Uniform Requirements for Manuscripts. Authors are requested to visit http://www.icmje.org/index.html before making online submission of their manuscript(s.  http://www.icmje.org/recommendations/browse/manuscript-preparation/preparing-for-submission.html Preparing for SubmissionPAGE CONTENTSGeneral PrinciplesReporting GuidelinesManuscript SectionsTitle PageAbstractIntroductionMethodsResultsDiscussionReferencesTablesIllustrations (FiguresUnits of MeasurementAbbreviations and Symbols1. General PrinciplesThe text of articles reporting original research is usually divided into Introduction, Methods, Results, and Discussion sections. This so-called “IMRAD” structure is not an arbitrary publication format but a reflection of the process of scientific discovery. Articles often need subheadings within these sections to further organize their content. Other types of articles, such as meta-analyses, may require different formats, while case reports, narrative reviews, and editorials may have less structured or unstructured formats.Electronic formats have created opportunities for adding details or sections, layering information, cross-linking, or extracting portions of articles in electronic versions. Supplementary electronic-only material should be submitted and sent for peer review simultaneously with the primary manuscript.2. Reporting GuidelinesReporting guidelines have been developed for different study designs; examples include CONSORT for randomized trials, STROBE for observational studies, PRISMA for systematic reviews and meta-analyses, and STARD for studies of diagnostic accuracy. Journals are encouraged to ask authors to follow these guidelines because

Sea transport of radioactive materials in Egypt (invited paper)

International Nuclear Information System (INIS)

El-Shinawy, R.M.K.; Gomaa, M.A.

1998-01-01

In Egypt the national regulations for safe transport of radioactive materials (RAM) are based on the International Atomic Energy Agency (IAEA) regulations. In addition, regulations for the safe transport of these materials through the Suez Canal (SC) were laid down by the Egyptian Atomic Energy Authority (EAEA) and the Suez Canal Authority (SCA). They are continuously updated to meet the increased knowledge and the experience gained. The technical and protective measures taken during transport of RAM through SC are mentioned. Assessment of the impact of transporting radioactive materials through the Suez Canal using the INTERTRAN computer code was carried out in cooperation with IAEA. The transported activities and empty containers, the number of vessels carrying RAM through the Canal from 1963 to 1996 and their nationalities are also discussed. The protective measures are mentioned. (author)

Materials for Molybdenum 99 purification

International Nuclear Information System (INIS)

Wilkinson, M. Victoria; Mondino, Angel V.; Manzini, Alberto C.

2003-01-01

The National Atomic Energy Commission (CNEA) produces fission Mo 99, an isotope of wide use in nuclear medicine. In order to simplify the current Mo 99 production process, to shorten its duration and reduce impurities in the final product, alternative methods for purification steps were looked for. In this work a variety of new materials for the purification columns were designed, all of them with carbon. These materials were studied and a material which contribute with the best results for molybdenum retention, was selected. The preparation procedure and the working conditions were determined. (author)

Synthesis of material microporous using raw materials alternative as a source of silica and alumina

International Nuclear Information System (INIS)

Santos, E.A.; Silva, T.L.

2014-01-01

Synthetic zeolites have important properties of a technological viewpoint. Thus, this work aims at the use of natural raw materials such as kaolin waste and wood ash in order to produce these microporous materials. The starting materials were characterized by X-ray diffraction (XRD) and spectroscopy, X-ray fluorescence (XRF); the phases formed as synthesis products were identified by XRD and gravimetric and differential thermal analysis (DTA/TG). Hydrothermal synthesis took place by mixing the raw materials in stoichiometrically calculated batches with NaOH (3M) at 90 °C and time of 6, 20, 24 and 48 hours. The results show the formation of phases of type zeolite A and sodalite, demonstrating the raw materials be an efficient and low cost alternative to producing microporous materials. (author)

A direct Eulerian method for the simulation of multi-material compressible flows with material sliding

International Nuclear Information System (INIS)

Motte, R.; Braeunig, J.P.; Peybernes, M.

2012-01-01

As the simulation of compressible flows with several materials is essential for applications studied within the CEA-DAM, the authors propose an approach based on finite volumes with centred variables for the resolution of compressible Euler equations. Moreover, they allow materials to slide with respect to each other as it is the case for water and air, for example. A conservation law is written for each material in a hybrid grid, and a condition of contact between materials under the form of fluxes is expressed. It is illustrated by the case of an intense shock propagating in water and interacting with an air bubble which will be strongly deformed and compressed

Resistance to ionizing radiations of materials installed at the CERN accelerators

International Nuclear Information System (INIS)

Schoenbacher, H.

1982-01-01

All materials installed in high energy accelerators along the lines of primary and secondary beams are exposed to ionizing radiation. This can in certain cases cause a degradation of the properties of these materials and consequently affect the good function of the installation. The author has taken at CERN large number of samples of materials in order to determine their radioresistance. Generally the organic materials and the electronic components are more sensitive to ionizing radiation. The author presents the results of these studies which concern the isolations of the cables (polyethylene, polyvinyl chloride, caoutchouc ethylene propylene, etc.), the isolations for the magnets on the base of epoxy resins, as well as other thermoresistant and thermoplastic products. The author equally presents a choice of materials and components which are used at CERN and which are resistant to radiations above an integral dose of 10 7 -10 8 Gy. (orig.)

Applying modular concepts to process and authorization basis issues for plutonium residue stabilization

International Nuclear Information System (INIS)

Hildner, R.A.; Zygmunt, S.J.

1996-01-01

A recent study completed for the Rocky Flats Environmental Technology Site proved that it is feasible to use modular, skid-mounted processes for disposition of Category 1 quantities of nuclear materials. This would allow personnel to assemble, test, and authorize the processes outside of the nuclear material management area. Besides having cost and schedule advantages, this technology reduces the uncertainty and risk in applications involving disposition of materials and facilities. This paper explains the previous research into modular skid-mounted processes and suggests various future applications of the technology

Safe transport of radioactive materials in Egypt

International Nuclear Information System (INIS)

El-Shinawy, R.M.K.

1994-01-01

In Egypt the national regulations for safe transport of radioactive materials (RAM) are based on the International Atomic Energy Agency (IAEA) regulations. In addition, regulations for the safe transport of these materials through the Suez Canal (SC) were laid down by the Egyptian Atomic Energy Authority (EAEA) and the Suez Canal Authority (SCA). They are continuously updated to meet the increased knowledge and the gained experience. The technical and protective measures taken during transport of RAM through SC are mentioned. Assessment of the impact of transporting radioactive materials through the Suez Canal using the INTERTRAN computer code was carried out in cooperation with IAEA. The transported activities and empty containers, the number of vessels carrying RAM through the canal from 1963 and 1991 and their nationalities are also discussed. The protective measures are mentioned. A review of the present situation of the radioactive wastes storage facilities at the Atomic Energy site at Inshas is given along with the regulation for safe transportation and disposal of radioactive wastes. (Author)

Directory of national competent authorities' approval certificates for package design, special form material and shipment of radioactive material. 1998 edition

International Nuclear Information System (INIS)

1998-08-01

The information contained in this report is given in six tables. Tables 1 to 4 present administrative data including issue and expiration dates, package identification, package serial numbers, modes for which the package/shipments approved and the edition of Safety Series No. 6 on which the approval has been based. The technical information on package mass, authorized contents, and detailed and general description of the package are contained in Table 5. Table 6 shows the certificates reported to the IAEA Secretariat by each participating Member State

Comments on the Brattle Report on Energy Mergers. A Report for Nuon

International Nuclear Information System (INIS)

Hofer, P.; Gammons, S.; Smith, P.

2006-08-01

NERA Economic Consulting has been asked by the Dutch energy company Nuon to review the report Factors Affecting Geographic Market Definition and Merger Control for the Dutch Electricity Sector' (June 2006), authored by the Brattle Group, and issued in the context of the consultation by the Netherlands competition authority (NMa) on mergers on the energy markets in the Netherlands and a possible North-West European market. The consultancy was asked to focus primarily on the criteria that the Brattle Report proposes for assessing energy mergers. They do not comment on aspects of market definition, and instead proceed, in broad terms, on the assumption of the market definitions contained in the Brattle Report. Section 2 provides comments that relate to horizontal issues in electricity wholesale/generation. Section 3 discusses horizontal issues in electricity retail. Section 4 provides an analysis of vertical issues that might arise

Exploring Material Culture in the Barrenlands

Science.gov (United States)

MacEachren, Zabe

2012-01-01

Although the author loves winter camping and holds the Inuit culture in great regard, thinking about material culture in a northern landscape referred to as barren constitutes a daunting lesson. She wondered, when a landscape is barren is it possible at all for someone to find material, make useful items and survive? So it was she joined the Mara…

Materials in energy conversion, harvesting, and storage

CERN Document Server

Lu, Kathy

2014-01-01

First authored book to address materials' role in the quest for the next generation of energy materials Energy balance, efficiency, sustainability, and so on, are some of many facets of energy challenges covered in current research. However, there has not been a monograph that directly covers a spectrum of materials issues in the context of energy conversion, harvesting and storage. Addressing one of the most pressing problems of our time, Materials in Energy Conversion, Harvesting, and Storage illuminates the roles and performance requirements of materials in energy an

Research projects on life management: materials ageing

International Nuclear Information System (INIS)

Gomez Briceno, D.

1997-01-01

Materials ageing is a time-dependent process, that involves the loss of availability of nuclear plants. Radiation embrittlement, stress corrosion cracking, irradiation assisted stress corrosion cracking, and thermal ageing are the most relevant time-dependent material degradation mechanisms that can be identified in the materials ageing process. The Materials Programme of Nuclear Energy Institute at CIEMAT carries out research projects and metallurgical examinations of failed components to gain some insight into the mechanisms of materials degradation with a direct impact on the life management of nuclear plants. (Author)

Effects of dental materials on MR images

International Nuclear Information System (INIS)

Hinshaw, D.B. Jr.; Hoishouser, B.; Engstrom, H.

1986-01-01

As MR imaging of the head and neck area becomes increasingly important in evaluating pathologic conditions of the brain, mid-face, and pharynx, it is becoming apparent that artifacts due to certain dental materials can obscure the findings. Although this fact has been known for some time, a study to identify which materials produce artifacts has not been performed. The authors examined the degree of artifact production caused by various materials commonly used in dental restorations. Since not all dental materials produce artifacts during MR imaging, these materials are described also

Paving materials for heat island mitigation

Energy Technology Data Exchange (ETDEWEB)

Pomerantz, M.; Akbari, H.; Chen, A.; Taha, H. [Lawrence Berkeley National Lab., CA (United States); Rosenfeld, A.H. [Dept. of Energy, Washington, DC (United States)

1997-11-01

This report summarizes paving materials suitable for urban streets, driveways, parking lots and walkways. The authors evaluate materials for their abilities to reflect sunlight, which will reduce their temperatures. This in turn reduces the excess air temperature of cities (the heat island effect). The report presents the compositions of the materials, their suitability for particular applications, and their approximate costs (in 1996). Both new and resurfacing are described. They conclude that, although light-colored materials may be more expensive than conventional black materials, a thin layer of light-colored pavement may produce energy savings and smog reductions whose long-term worth is greater than the extra cost.

Small-angle neutron scattering in materials science - an introduction

International Nuclear Information System (INIS)

Fratzl, P.

1996-01-01

The basic principles of the application of small-angle neutron scattering to materials research are summarized. The text focusses on the classical methods of data evaluation for isotropic and for anisotropic materials. Some examples of applications to the study of alloys, porous materials, composites and other complex materials are given. (author) 9 figs., 38 refs

Radiation-sensitive material and method of recording information upon radiation-sensitive material

International Nuclear Information System (INIS)

Petrov, V.V.; Krjuchin, A.A.

1981-01-01

The invention can be employed for recording binary information in memory units of electronic computers, in video-recording equipment, laser recording devices and other recording means. The proposed radiation-sensitive material comprises a metallic layer made of silver, or copper, or nickel, or thallium, or alloy thereof, an inorganic material layer made of arsenic chalcogenide, or antimony chalcogenide, or bismuth chalcogenide, and a separation layer disposed between the metallic layer and the inorganic material layer made of a material which is inert relative to said layers, which separation layer has a thickness sufficient for preventing interaction between the metallic layer and the inorganic material layer when the radiation-sensitive materials is exposed to electromagnetic or corpuscular radiation having a power density lower than a threshold value required for the breakdown of the separation layer in the area exposed to radiation. The separation layer can be made from As, Sb, Si or Ge or their oxides, metallic oxides of e.g. Al, Ti, V or Fe, or from polyorganosiloxane films. (author)

Organic optoelectronic materials

CERN Document Server

Li, Yongfang

2015-01-01

This volume reviews the latest trends in organic optoelectronic materials. Each comprehensive chapter allows graduate students and newcomers to the field to grasp the basics, whilst also ensuring that they have the most up-to-date overview of the latest research. Topics include: organic conductors and semiconductors; conducting polymers and conjugated polymer semiconductors, as well as their applications in organic field-effect-transistors; organic light-emitting diodes; and organic photovoltaics and transparent conducting electrodes. The molecular structures, synthesis methods, physicochemical and optoelectronic properties of the organic optoelectronic materials are also introduced and described in detail. The authors also elucidate the structures and working mechanisms of organic optoelectronic devices and outline fundamental scientific problems and future research directions. This volume is invaluable to all those interested in organic optoelectronic materials.

Material machining with pseudo-spark electron beams

International Nuclear Information System (INIS)

Benker, W.; Christiansen, J.; Frank, K.; Gundel, H.; Redel, T.; Stetter, M.

1989-01-01

The authors give a brief description of the production of pseudo-spark (low pressure gas discharge) electron beams. They illustrate the use of these electron beams for machining not only conducting, semiconducting and insulating materials, but also thin layers of such materials as high temperature superconducting ceramics

77 FR 65351 - Missouri: Authorization of State Hazardous Waste Management Program Revisions

Science.gov (United States)

2012-10-26

...: Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental Protection Agency (EPA... Jackson-Johnson, Environmental Protection Agency, Waste Enforcement & Materials Management Branch, 11201... its hazardous waste program under the Resource Conservation and Recovery Act (RCRA). EPA proposes to...

Thermal transfer in multilayer materials

Energy Technology Data Exchange (ETDEWEB)

Bouayad, H.; Mokhtari, A.; Martin, C.; Fauchais, P. [Laboratoire de Materiaux Ceramiques et Traitements de Surface, 87 - Limoges (France)

1993-12-31

It is easier to measure the thermal diffusivity (a) of material rather than its thermal conductivity (k), a simple relationship (k=a cp) allowing to calculate k provided and cp are measured. However this relationship applies only if the considered material is homogenous. For composite materials, especially for multilayers ones, we have developed an analytical model and a numerical one. The first one allows to determine the thermal diffusivity and conductivity of a two-layer material. The second one allows to determine the thermal diffusivity of one of the layers provided the values of (a) are known for the two other layers (for a two or three-layer material). The use of the two models to calculate the apparent diffusivity of a two layer material results in values in fairly good agreement. (Authors). 4 refs., 3 figs., 3 tabs.

Safe transport of radioactive material. 4. ed

International Nuclear Information System (INIS)

2006-01-01

The IAEA has been publishing Regulations for the Safe Transport of Radioactive Material since 1961. Meeting its statutory obligation to foster the exchange and training of scientists and experts in the field of peaceful uses of atomic energy, the IAEA has developed a standardized approach to transport safety training. This training manual is an anchor of the standardized approach to training. It is a compendium of training modules for courses related to the different aspects of safety of transport of radioactive material. Keeping in view the specific needs of the potential users, the manual includes material that can be used for a variety of training programmes of duration ranging from half-a-day to ten days, for specific audiences such as competent authority personnel, public authorities, emergency response personnel and cargo handlers

Primary expatiation on micro material evidence and authentication

International Nuclear Information System (INIS)

Yang Mingtai; Wang Wen; Wu Lunqiang; Dai Changsong

2012-01-01

The micro material evidence is the impersonal and concrete material evidences, and the quantity and volume is small, but it plays an important role in judicature litigation. In the paper, the basic character, type and form mechanism of the micro material evidence have been analyzed and discussed, and the gist of the micro material evidence has been summarized. It must play a helpful role in the micro material evidence to correlative workers for cognizance and application. (authors)

Opening of new field in material science and technology by materials irradiation research

Energy Technology Data Exchange (ETDEWEB)

Kurishita, Hiroaki [Tohoku Univ., Sendai (Japan). Inst. for Materials Research

1998-03-01

It is believed that high energy particle irradiation causes severe degradation of materials, and great efforts have been made to reveal the underlying mechanism of such degradation. However, recent progress of the developments of irradiation rigs performed in the Japan Materials Testing Reactor (JMTR) and materials fabrication techniques has enabled to change our understanding of radiation effects on materials from the above pessimistic one to the very challenging one, i.e., irradiation has the beneficial effect of producing new phenomena and/or innovative materials that will not be available without irradiation. An example to be noted is that irradiation with neutrons in JMTR greatly improved the ductility of less ductile metals. This ductility improvement due to irradiation is directly opposite to irradiation embrittlement and is called radiation induced ductilization (RIDU). In this presentation the significance of RIDU and its mechanism will be stated. (author)

Challenges for INAA in studies of materials from advanced material research including rare earth concentrates and carbon based ceramics

International Nuclear Information System (INIS)

Bode, P.; Van Meerten, Th.G.

2000-01-01

Rare-earth elements are increasingly applied in advanced materials to be used, e.g., in electronic industry, automobile catalysts, or lamps and optical devices. Trace element analysis of these materials might be an interesting niche for NAA because of the intrinsic high accuracy of this technique, and the shortage of matrix matching reference materials with other methods for elemental analysis. The carbon composite materials form another category of advanced materials, where sometimes a very high degree of purity is required. Also for these materials, NAA has favorable analytical characteristics. Examples are given of the use of NAA in the analysis of both categories of materials. (author)

Small-angle neutron scattering in materials science

International Nuclear Information System (INIS)

Fratzl, P.

1999-01-01

Small-angle scattering (SAS) in an ideal tool for studying the structure of materials in the mesoscopic size range between 1 and about 100 nanometers. The basic principles of the method are reviewed, with particular emphasis on data evaluation and interpretation for isotropic as well as oriented or single-crystalline materials. Examples include metal alloys, composites and porous materials. The last section gives a comparison between the use of neutrons and (synchrotron) x-rays for small-angle scattering in materials physics. (author)

Radiation protection education of executive authorities in Austria

International Nuclear Information System (INIS)

Timal, Guenter

2000-01-01

Legal basis and the self-protection of the own action forces are the reasons, why the executive authorities (Federal Police and Federal Gendarmerie) in Austria are engaged with radiation protection. The main task of education and training is delegated to the Civil Protection School, which belongs to the Department for Civil Protection in the Federal Ministry of the Interior. The possible missions range from control of transports with dangerous goods, accidents with radioactive materials, measurements after accidents in nuclear power plants, preventing illicit trafficking up to satellite crashes. The education is split in three sections, one week each, with two examinations. For preserving the standard of education and readiness for duty a regular further education and obligatory advanced training is a basic premise. The aim of the education is to educate autonomous and self dependent action-forces, which are under compliance of self-protection in a position, to detect radioactive sources or contamination, to measure them and to secure the dangerous zone. The programs of the education and training include theoretical instructions and practical exercises. The programs are currently evaluated and updated according to the latest standards to pedagogics, didactics and technology. This radiation protection education is offered in a modified form also to other action forces and authorities who were entrusted with tasks in radiation protection (e.g. fire brigade, red cross, telecommunications, customs, citizens of municipalities, provinces and ministries) to guarantee a most preferable basic training. The programs are supplemented by special courses, as for example radiation detection with helicopters supported with a GPS-airborne monitoring system or special instruction courses in connection with border protection monitors to prevent the illicit trafficking of radioactive sources or nuclear material. (author)

Radiation protection education of executive authorities in Austria

Energy Technology Data Exchange (ETDEWEB)

Timal, Guenter [Federal Ministry of the Interior, Department for Civil Protection, Civil Protection School, Vienna (Austria)

2000-05-01

Legal basis and the self-protection of the own action forces are the reasons, why the executive authorities (Federal Police and Federal Gendarmerie) in Austria are engaged with radiation protection. The main task of education and training is delegated to the Civil Protection School, which belongs to the Department for Civil Protection in the Federal Ministry of the Interior. The possible missions range from control of transports with dangerous goods, accidents with radioactive materials, measurements after accidents in nuclear power plants, preventing illicit trafficking up to satellite crashes. The education is split in three sections, one week each, with two examinations. For preserving the standard of education and readiness for duty a regular further education and obligatory advanced training is a basic premise. The aim of the education is to educate autonomous and self dependent action-forces, which are under compliance of self-protection in a position, to detect radioactive sources or contamination, to measure them and to secure the dangerous zone. The programs of the education and training include theoretical instructions and practical exercises. The programs are currently evaluated and updated according to the latest standards to pedagogics, didactics and technology. This radiation protection education is offered in a modified form also to other action forces and authorities who were entrusted with tasks in radiation protection (e.g. fire brigade, red cross, telecommunications, customs, citizens of municipalities, provinces and ministries) to guarantee a most preferable basic training. The programs are supplemented by special courses, as for example radiation detection with helicopters supported with a GPS-airborne monitoring system or special instruction courses in connection with border protection monitors to prevent the illicit trafficking of radioactive sources or nuclear material. (author)

Enhancing Author Information for CERN Document Server: Creating an Author Collection and Using Author Disambiguation Methods

CERN Document Server

AUTHOR|(CDS)2096274; Witowski, Sebastian

Authors are a substantial part of queries in digital libraries, where the results are reflecting the service quality and success. Ambiguous author names can confuse users and cause an inaccurate relation between authorships and individual researchers. Providing a set of disambiguated authors is challenging and related to data integration, since this is done in several ways and by different systems, both manually and automatically. Many disambiguation algorithms have been proposed in the literature, where the most solutions are solving the ambiguities by applying machine learning techniques. However, such problems cannot be solved with an accuracy of 100%. Our contributions to the CERN Document Server presented in this work consists of two parts: first, we create and deploy an author knowledge data base (collection) and second, we link authors of bibliographic records back to their authority records. For the latter, we use a library providing machine learning tools for clustering (where we use trained data fro...

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Author Affiliations. M Sen1 R Balasubramaniam1 A V Ramesh Kumar2. Department of Materials and Metallurgical Engineering, Indian Institute of Technology, Kanpur 208 016, India; Defence Materials Stores and Research Development Establishment, Kanpur 208 013, India ...

Methods for the measurement of micro material evidence

International Nuclear Information System (INIS)

Yang Mingtai; Wang Wen; Wu Lunqiang; Dai Changsong

2012-01-01

The micro material evidence has been used in judicature litigation successfully, that must base on impersonal authentication with the advanced and proper methods. The basic principle, main trait, applicable range, analysis minimum and sensitive limit of twelve type instruments used in micro material evidence analysis have been related. Those could supply optional proper methods for micro material evidence. (authors)

Controlling the discharge of molten material

International Nuclear Information System (INIS)

Geel, J. van; Dobbels, F.; Theunissen, W.

1980-01-01

A method and device are described for controlling the discharge of molten material from a melter or an intermediate vessel, in which a primary outflow is fed to an overflow system, the working level of which is regulated by means of pneumatic pressure on a communicating chamber pertaining to the overflow system. Molten material may be led into a primary overflow by means of a pneumatic lift. The material melted may be a glass used for disposing of radioactive liquid wastes. (author)

Order for execution of the law concerning regulations of nuclear source materials, nuclear fuel materials and reactors

International Nuclear Information System (INIS)

1978-01-01

Under the above mentioned law this order prescribes the procedures of controls given to the persons who wish to conduct refining and fabricating businesses, to construct and operate reactors, and to use nuclear source materials, nuclear fuel materials and internationally controlled materials. The common controlling principle prescribed is that the permission or authorization necessary for above listed businesses should be applied for at each factory or each place of business. Based on the principle, the order prescribes: the procedures to apply for the authorization of the refining business, the permission of the change thereof, and the permission of the fabricating business and the change, thereof (the 1st chapter); the procedures to apply for the permission of the construction of reactors and of the change of the construction, as well as the procedure to do periodic inspections of reactor facilities (the 2nd chapter); the procedures to apply for the permission to use nuclear fuel materials and to change the use thereof, the submission of the report to use nuclear source materials, as well as the procedure to apply for the permission to use internationally controlled materials. In the 4th chapter the order lists up the items on which the competent Ministers may require reports from the person who carries on the relevant business. (Matsushima, A.)

Composites materials: the technology of future

International Nuclear Information System (INIS)

Ahmed, M.N.; Memon, I.R.; Ahmad, F.; Zafar, N.

2001-01-01

Composite materials have a long history of usage. Their precise beginnings are not known; however all recorded history contains references to some form of composite material. e.g. straw was used by man to strengthen mud bricks thousands of years ago. This article presents the use of advanced composites materials in aircraft and space industry. Its brief history, use in military and civil aviation, use in space program, future usage, advantages in terms of cost, weight and strength. Use of composites in unmanned aerial vehicles and problems associated with usage of composites materials are also discussed. (author)

Safety of radiation sources and other radioactive materials in Jordan

International Nuclear Information System (INIS)

Majali, M.M.

2001-01-01

Since joining the IAEA Model Project for upgrading radiation protection infrastructure in countries of West Asia, Jordan has amended its radiation safety legislation. The Regulatory Authority is improving its inventory system for radiation sources and other radioactive materials and also its notification, registration, licensing, inspection and enforcement systems. It has established national provisions for the management of orphan sources after they have been found. The system for the control of the radiation sources and other radioactive materials entering the country has been improved by the Regulatory Authority. (author)

[Parasite eggs identified in material from archaeological excavations in Ribe (the viking age) (author's transl)].

Science.gov (United States)

Nansen, P; Jorgensen, R J

1977-06-01

Eggs of Fasciola hepatica, Ascaris sp., Taenia sp., and Trichuris sp. have been demonstrated in archaeological excavations from the early viking period (750--800 A.D.) in Ribe, the oldest urban society of Denmark. The origin of the faecal material is discussed. The parasitological examinations are continued and extended.

48 CFR 1325.204 - Evaluating offers of foreign construction material.

Science.gov (United States)

2010-10-01

... foreign construction material. 1325.204 Section 1325.204 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE SOCIOECONOMIC PROGRAMS FOREIGN ACQUISITION Buy American Act-Construction Materials 1325.204 Evaluating offers of foreign construction material. The designee authorized to specify a...

Evaluation of Terminated Nuclear Material Licenses

International Nuclear Information System (INIS)

Spencer, K.M.; Zeighami, E.A.

1999-01-01

This report presents the results of a six-year project that reviewed material licenses that had been terminated during the period from inception of licensing until approximately late-1994. The material licenses covered in the review project were Part 30, byproduct material licenses; Part 40, source material licenses; and Part 70, special nuclear material licenses. This report describes the methodology developed for the project, summarizes the findings of the license file inventory process, and describes the findings of the reviews or evaluations of the license files. The evaluation identified nuclear material use sites that need review of the licensing material or more direct follow-up of some type. The review process also identified licenses authorized to possess sealed sources for which there was incomplete or missing documentation of the fate of the sources

Tie-down assessment of radioactive material packages on conveyances approach to competent authority approval applications in accordance with TS-R 1 (June 2000) and TS-G-1.1 (June 2002)

Energy Technology Data Exchange (ETDEWEB)

Read, J.; Owen, S.; Tso, C.F. [Arup, London (United Kingdom)

2004-07-01

This paper summarizes the authors' findings, during carrying out many package tie-down assessments, regarding the approach to the assessment process, and the issues that may arise. The current regulatory framework, as outlined in the abstract, is considered and possible areas for further development or research are discussed. The safe transport of a package containing radioactive material requires a secure system of retention on the conveyance during transport. The requirements for the assessment of this tie-down system are covered by International Atomic Energy Authority (IAEA) Regulations, and by the specific regulatory and guidance materials applying in the country of application. The IAEA regulations have recently been updated in TS-R-1 (June 2000) [1] and TS-G-1.1 (June 2002) [2]. In particular, Appendix V of reference [2] specifically covers 'Package Stowage and Retention during Transport'. In the United Kingdom the Transport Container Standardisation Committee (TCSC) provides guidance on the application of the IAEA regulations in TCSC 1006 ''The securing of Radioactive Materials on Conveyances'' [3], and this document has also been revised in December 2003. The basic requirement of the IAEA regulations is to maintain the integrity of the components of the package and its retention systems during routine operations (TS-R-1 Para 612). In accident conditions the package is permitted and may be required as part of the design (the weak-link approach as discussed later in this paper) to separate from the conveyance, while preserving the package integrity. Any tie-down attachments on the package shall be so designed that, under normal and accident conditions of transport, the forces in those attachments shall not impair the ability of the package to meet the requirements of the Regulations. (TS-R-1 Para 636).

Tie-down assessment of radioactive material packages on conveyances approach to competent authority approval applications in accordance with TS-R 1 (June 2000) and TS-G-1.1 (June 2002)

International Nuclear Information System (INIS)

Read, J.; Owen, S.; Tso, C.F.

2004-01-01

This paper summarizes the authors' findings, during carrying out many package tie-down assessments, regarding the approach to the assessment process, and the issues that may arise. The current regulatory framework, as outlined in the abstract, is considered and possible areas for further development or research are discussed. The safe transport of a package containing radioactive material requires a secure system of retention on the conveyance during transport. The requirements for the assessment of this tie-down system are covered by International Atomic Energy Authority (IAEA) Regulations, and by the specific regulatory and guidance materials applying in the country of application. The IAEA regulations have recently been updated in TS-R-1 (June 2000) [1] and TS-G-1.1 (June 2002) [2]. In particular, Appendix V of reference [2] specifically covers 'Package Stowage and Retention during Transport'. In the United Kingdom the Transport Container Standardisation Committee (TCSC) provides guidance on the application of the IAEA regulations in TCSC 1006 ''The securing of Radioactive Materials on Conveyances'' [3], and this document has also been revised in December 2003. The basic requirement of the IAEA regulations is to maintain the integrity of the components of the package and its retention systems during routine operations (TS-R-1 Para 612). In accident conditions the package is permitted and may be required as part of the design (the weak-link approach as discussed later in this paper) to separate from the conveyance, while preserving the package integrity. Any tie-down attachments on the package shall be so designed that, under normal and accident conditions of transport, the forces in those attachments shall not impair the ability of the package to meet the requirements of the Regulations. (TS-R-1 Para 636)

Inflation - Growth Nexus in Ethiopia: Evidence from Threshold Auto ...

African Journals Online (AJOL)

Optiplex 7010 Pro

higher rate of inflation raises the amount of inflation tax firms pay as firms hold money ..... Metrological Agency (NMA for annual average rainfall data and NBE for ..... when NBE allowed private ownership of financial intuitions, the financial.

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Author Affiliations. Wang Juan1 Li Yajiang1 Wu Huiqiang1 Ren Jiangwei1. Key Lab of Liquid Structure and Heredity of Materials, Ministry of Education, School of Materials Science and Engineering, Shandong University, Jinan 250061, P.R. China ...

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Author Affiliations. Xiuqiang Li1 Dong Zhang1 Peiying Zhu1 Chao Yang1. Key Laboratory of Advanced Civil Engineering Materials, Ministry of Education, College of Materials Science and Engineering, Tongji University, 4800 CaoAn Road, Shanghai 200092, China ...

Thermosetting materials from the radiation-modified polymer compositions, 2. Development of adhesion-active and thermostable thermosetting materials

International Nuclear Information System (INIS)

Kalkis, V.; Maksimovs, R.D.; Zicans, J.; Bocoka, T.; Revjakins, O.

1999-01-01

Methods that improve the adhesion and thermal stability of the thermosetting materials are considered. Experimental studies of the blends composed of polyethylene, ethylene-propylene-diene copolymer (with characteristic specific for rubbers) and mesomorphic copolyesters, using rheological, spectrometric, and thermomechanical methods, have shown that radiation modification improves the adhesion and deformation properties as well as thermal stability of these blends. Therefore, materials of such system can be successfully used, e.g., as elastic and adhesion-active thermosetting materials at temperature above 473 K. (author)

Materials science with SR using x-ray imaging

International Nuclear Information System (INIS)

Kuriyama, Masao

1990-01-01

Some examples of applications of synchrotron radiation to materials science demonstrate the importance of microstructure information within structural as well as functional materials in order to control their properties and quality as designed for industrial purposes. To collect such information, x-ray imaging in quasi real time is required in either the microradiographic mode or the diffraction (in transmission) mode. New measurement technologies based on imaging are applied to polycrystalline materials, single crystal materials and multilayered device materials to illustrate what kind of synchrotron radiation facility is most desirable for materials science and engineering. (author)

Consumer mechatronics: a challenging playground for transducing materials and devices

Science.gov (United States)

Skjolstrup, Carl E.; Vonsild, Asbjorn L.

2003-03-01

The authors of this article are characterised by having a background within robotics technology, and have within the last 2-3 years moved into a material & process dominated environment. The authors are among other things responsible within LEGO Company; an internationally known toy developer and producer, for identification, prioritisation and procurement of new technological opportunities within materials, processes and devices providing new functionalities for the LEGO product.

Fissile material proliferation risk

International Nuclear Information System (INIS)

Dreicer, J.S.; Rutherford, D.A.

1996-01-01

The proliferation risk of a facility depends on the material attractiveness, level of safeguards, and physical protection applied to the material in conjunction with an assessment of the impact of the socioeconomic circumstances and threat environment. Proliferation risk is a complementary extension of proliferation resistance. The authors believe a better determination of nuclear proliferation can be achieved by establishing the proliferation risk for facilities that contain nuclear material. Developing a method that incorporates the socioeconomic circumstances and threat environment inherent to each country enables a global proliferation assessment. To effectively reduce the nuclear danger, a broadly based set of criteria is needed that provides the capability to relatively assess a wide range of nuclear related sites and facilities in different countries and still ensure a global decrease in proliferation risk for fissile material (plutonium and highly enriched uranium)

Improvements in or relating to refractory materials

International Nuclear Information System (INIS)

Peckett, J.W.A.

1980-01-01

A process is described for the production of a refractory material which includes heating an intermediate material containing carbon to cause a thermally induced reaction involving carbon in the intermediate material, wherein the intermediate material has been produced by heating a shaped gel precipitated gel, and the carbon in the intermediate material for participating in the thermally induced reaction has been produced from a gelling agent, or a derivative thereof, incorporated in the gel during gel precipitation. As examples, the refractory material may comprise uranium/plutonium oxide, or uranium/plutonium carbide, or thorium/uranium carbide, or tungsten carbide, or tungsten carbide/cobalt metal. (author)

A study on homogeneity of the IAEA candidate reference materials for microanalysis and analytical support in the certification of these materials

International Nuclear Information System (INIS)

Dybczynski, R.; Danko, B.; Polkowska-Motrenko, H.

2002-01-01

In this paper a study on homogeneity of new IAEA candidate reference materials: IAEA 338 Lichen and IAEA 413 Algae in small (ca.10 mg) samples as well as some data contributing to certification of these materials are presented. (author)

Optimal use of polyethylene glycol for preparation of small bowel video capsule endoscopy: a network meta-analysis.

Science.gov (United States)

Wu, Shan; Gao, Yun-Jie; Ge, Zhi-Zheng

2017-06-01

Standardized strategy of bowel preparation before video capsule endoscopy (VCE) remains controversial. This study aimed to assess the ideal dose of PEG, based on small bowel visualization quality (SBVQ), diagnostic yield (DY), and complete rate (CR) of VCE using a network meta-analysis (NMA) of randomized controlled trials (RCTs). This NMA included RCTs comparing any of the following bowel preparation interventions for VCE: fasting overnight ("Fast"), 1 liter PEG ("PEG 1L"), 2-liter PEG ("PEG 2L"), or 4-liter PEG ("PEG 4L"). The authors searched papers in PubMed, Cochrane Library, and Embase as of June 2016. The cumulative ranking (SUCRA) probabilities to rank different doses of PEG and Fast were used. The search engine provided 102 studies. Nine RCTs including 982 patients were incorporated into this analysis. All studies showed low risk of bias of blinding. SUCRA provided an initial ranking among these strategies, in which PEG 2 L showed the best score in SBVQ (PEG 2 L, 89.4%; PEG 1 L, 62.5%; PEG 4 L, 44.0%; Fast, 4.1%) and DY (PEG 2 L, 74.6%; PEG 1 L 28.1%; PEG 4 L 65.9%; Fast 31.4%) of VCE. No significant difference was shown in the analysis of CR. This study recommends PEG 2 L as the ideal dose, which may improve the SBVQ of VCE and, therefore, diagnostic accuracy. Multi-center randomized controlled trials are required to verify these findings.

The role of certified reference materials in material control and accounting

International Nuclear Information System (INIS)

Turel, S.P.

1979-01-01

One way of providing an adequate material control and accounting system for the nuclear fuel cycle is to calculate material unaccounted for (MUF) after a physical inventory and to compare the limit of error of the MUF value (LEMUF) against prescribed criteria. To achieve a meaningful LEMUF, a programme for the continuing determination of systematic and random errors is necessary. Within this programme it is necessary to achieve traceability of all Special Nuclear Material (SNM) control and accounting measurements to an International/National Measurement System by means of Certified Reference Materials. SNM measurements for control and accounting are made internationally on a great variety of materials using many diverse measurement procedures by a large number of facilities. To achieve valid overall accountability over this great variety of measurements there must be some means of relating all these measurements and their uncertainties to each other. This is best achieved by an International/National Measurement System (IMS/NMS). To this end, all individual measurement systems must be compatible to the IMS/NMS and all measurement results must be traceable to appropriate international/national Primary Certified Reference Materials. To obtain this necessary compatibility for any given SNM measurement system, secondary certified reference materials or working reference materials are needed for every class of SNM and each type of measurement system. Ways to achieve ''traceability'' and the various types of certified reference material are defined and discussed in this paper. (author)

Electron microscopy of some exotic materials

International Nuclear Information System (INIS)

Mitchell, T.E.

1998-01-01

Just about every material has been looked at under the microscope, either out of pure inquisitiveness or the need to relate the microstructure to its properties. Some of these materials are mundane, like steels or glass or polyethylene; others are so-called advanced, such as intermetallics, silicon nitride or zirconia; yet others might be called exotic whether they be martian rocks, high temperature superconductors, fullerenes, diamonds, or the latest thin film device. Many exotic materials are important in Los Alamos, not only weapons materials such as actinides, tritium and explosives, but also civilian materials for energy applications. Here the author will report briefly on plutonium and uranium, on rhenium disilicide, and on Cu-Nb nanolayered composites

Carbon fibre material for tomorrow

International Nuclear Information System (INIS)

Kartini Noorsal; Mohd Ariff Baharom

2010-01-01

As science and technology continue to cross boundaries of known practices, materials and manufacturing techniques and into the frontiers of new materials, environment and applications, the opportunities for research in materials in general will inevitably increase. The unique properties of carbon fibre which combines low weight and high stiffness, makes it in ever greater demand as substitutes for traditional materials. This is due to the rising costs of raw materials and energy and the necessity to reduce carbon dioxide emission. The carbon fibres produced are particularly of high standard in terms of quality and processing characteristics especially when it is designed in structural components in the aerospace and defence industries. This results in a well structured organisation in producing the fibre starting from its raw material to the final composite products. In achieving this effort, research and communication of the progress takes a fundamental role. (author)

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Bulletin of Materials Science; Volume 33; Issue 1. Dispersion and reinforcing mechanism of carbon nanotubes in epoxy nanocomposites. Smrutisikha Bal ... Author Affiliations. Smrutisikha Bal1. Department of Metallurgical and Materials Engineering, National Institute of Technology, Rourkela 769 008, India ...

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Author Affiliations. K R Ravi1 R M Pillai1 B C Pai1 M Chakraborty2. Materials and Minerals Division, Regional Research Laboratory (CSIR), Thiruvananthapuram 695 019, India; Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur 721 302, India ...

Material and construction of primary components

International Nuclear Information System (INIS)

Kaser, A.; Wallner, F.

1978-01-01

The construction of SNR's requires specific properties of the materials, i.e. high strength at temperatures of 600 0 C, adequate creep rupture strength, low long-time embrittlement. Aspects are given for optimalization of the mentioned properties with regard to safe manufacture especially good weldability. The austenitic material X6CrNil811 similar the type AISI 304 SS finally was chosen. Besides the fundamental analysis of the material properties it will be reported about the experiences gained during the manufacturing of the essential components. (author)

Reduced intensity conditioning is superior to nonmyeloablative conditioning for older chronic myelogenous leukemia patients undergoing hematopoietic cell transplant during the tyrosine kinase inhibitor era

DEFF Research Database (Denmark)

Warlick, Erica; Ahn, Kwang Woo; Pedersen, Tanya L

2012-01-01

Tyrosine kinase inhibitors (TKIs) and reduced intensity conditioning (RIC)/nonmyeloablative (NMA) conditioning hematopoietic cell transplants (HCTs) have changed the therapeutic strategy for chronic myelogenous leukemia (CML) patients. We analyzed post-HCT outcomes of 306 CML patients reported to...

Preparation of plant-specific NDA reference material

International Nuclear Information System (INIS)

Abedin-Zadeh, R.; Beetle, T.; Kuhn, E.; Terrey, D.; Turel, S.; Busca, G.; Guardini, S.

1983-01-01

The importance of having suitable and well characterized non-destructive assay (NDA) reference materials for the verification activities of the safeguards control authorities is stressed. The Euratom Inspectorate and the IAEA have initiated an extensive programme for the procurement and preparation of Joint Euratom/IAEA safeguards NDA reference materials with the active participation of the Ispra Establishment of the Euratom Joint Research Centre. The different type and nature of materials, condition of measurements, and plant characteristics and provisions had to be taken into account for plant-specific NDA reference materials. The preparation of each reference material was planned case by case and specific criteria such as limitations in different facilities, measurement capabilities, conditions, product availability and population variability are being ascertained. A procurement scheme was prepared describing step-by-step procedures detailing responsibilities, measurement conditions, destructive analysis schemes, desired characteristics and methods of data evaluation. This paper describes the principles and procedures carried out for the preparation of a reference MOX pin, low enriched uranium reference rods, low enriched uranium reference drums, reference MTR assemblies, and THTR reference pebbles. The scheme for each characterization technique is presented. (author)

Dynamic material accountancy in an integrated safeguards system

International Nuclear Information System (INIS)

Murrell, J.S.

1979-01-01

The nuclear material safeguards system at the Portsmouth Gaseous Diffusion Plant is currently being improved. A new material control system will provide computerized monitoring and accountability, and a new physical protection system will provide upgraded perimeter and portal entry monitoring. The control system incorporates remote computer terminals at all processing, transfer and storage areas throughout the plant. Terminal equipment is interfaced to a computer through teletype equipment. A typical terminal transaction would require verification that the particular activity (material movement or process operation) is authorized, identifying the container involved, weighing the container, and then verifying the enrichment with non-destructive assay instrumentation. The system, when fully operational, will provide near real-time accountability for each eight-hour work shift for all items in process. (author)

Using glass as a shielding material

International Nuclear Information System (INIS)

Yousef, S.

2002-04-01

Different theoretical and technological concepts and problems in using glass as a shielding material was discussed, some primarily designs for different types of radiation shielding windows were illustrated. (author)

Using glass as a shielding material

International Nuclear Information System (INIS)

Yousef, S.

2003-01-01

Different theoretical and technological concepts and problems in using glass as a shielding material was discussed, some primarily designs for different types of radiation shielding windows were illustrated. (author)

Hot deformation effect on the kinetics of austenite transformation under continuous cooling conditions

International Nuclear Information System (INIS)

Bernshtejn, M.L.; Zajmovskij, V.A.; Kisteh, N.V.; Samedov, O.V.; Faldin, S.A.

1979-01-01

The effect of hot deformation on the kinetics of austenite transformations in the commercial 4040Kh 40KhN, and 40KhNMA steels on continuous cooling was studied. The transformations were studied using a dilatometer of a special design which permits a specimen to be fixed quickly in holders after hot deformation. It is stated that in hot-deformed austenite the pearlite transformation proceeds at higher temperatures and in a narrower temperature range. Austenite deformation provides an opportunity to obtain a more fine ferrite-pearlite structure and ensures a uniform distribution of a structurally free ferrite in the steel bulk. The effect of hot deformation on the structure of ferrite decomposition products in the 40KhN and 40KhNMA steels is more complicated, which is connected with a substantial change in the kinetics of pearlite and intermediate transformations

The Burden of Cardiovascular Disease in Sub-Saharan Africa and the Black Diaspora.

Science.gov (United States)

Gillum, Richard F

2018-03-19

For over four decades the National Medical Association (NMA) and the Association of Black Cardiologists (ABC) have sought to bring to national attention the disparate burden of cardiovascular disease (CVD) among African Americans. However, systematic inquiry has been inadequate into the burden of CVD in the poor countries of Sub-Saharan Africa (SSA) and the African diaspora in the Americas outside the USA. However, recently, the Global Burden of Disease Study (GBD) has offered new tools for such inquiry. Several initial efforts in that direction using 2010 data have been published. This article highlights some new findings for SSA for 2016. It also suggests that NMA and ABC further this effort by direct advocacy and collaboration with the GBD to make estimates of CVD burden in African Americans and South American Blacks explicitly available in future iterations.

Base technology development of new materials for FBR performance innovations

International Nuclear Information System (INIS)

Kano, Shigeki; Koyama, Masahiro; Nomura, Shigeo; Morikawa, Satoru; Ueno, Fumiyoshi

1989-01-01

This paper describes the base technology development of new materials for FBR performance innovations at the Power Reactor and Nuclear Fuel Development Corporation. The contents are as follows: (1) development of sodium and radiation resistant new materials, (2) development of high performance shielding material, (3) development of high performance control material, (4) development of new functional materials for reactor instrumentation. (author)

Author Disambiguation in PubMed: Evidence on the Precision and Recall of Author-ity among NIH-Funded Scientists.

Science.gov (United States)

Lerchenmueller, Marc J; Sorenson, Olav

2016-01-01

We examined the usefulness (precision) and completeness (recall) of the Author-ity author disambiguation for PubMed articles by associating articles with scientists funded by the National Institutes of Health (NIH). In doing so, we exploited established unique identifiers-Principal Investigator (PI) IDs-that the NIH assigns to funded scientists. Analyzing a set of 36,987 NIH scientists who received their first R01 grant between 1985 and 2009, we identified 355,921 articles appearing in PubMed that would allow us to evaluate the precision and recall of the Author-ity disambiguation. We found that Author-ity identified the NIH scientists with 99.51% precision across the articles. It had a corresponding recall of 99.64%. Precision and recall, moreover, appeared stable across common and uncommon last names, across ethnic backgrounds, and across levels of scientist productivity.

Nuclear reactors: physics and materials

Energy Technology Data Exchange (ETDEWEB)

Yadigaroglu, G

2005-07-01

In the form of a tutorial addressed to non-specialists, the article provides an introduction to nuclear reactor technology and more specifically to Light Water Reactors (LWR); it also shows where materials and chemistry problems are encountered in reactor technology. The basics of reactor physics are reviewed, as well as the various strategies in reactor design and the corresponding choices of materials (fuel, coolant, structural materials, etc.). A brief description of the various types of commercial power reactors follows. The design of LWRs is discussed in greater detail; the properties of light water as coolant and moderator are put in perspective. The physicochemical and metallurgical properties of the materials impose thermal limits that determine the performance and the maximum power a reactor can deliver. (author)

Materials in Participatory Design Processes

DEFF Research Database (Denmark)

Hansen, Nicolai Brodersen

This dissertation presents three years of academic inquiry into the question of what role materials play in interaction design and participatory design processes. The dissertation aims at developing conceptual tools, based on Deweys pragmatism, for understanding how materials aid design reflection....... It has been developed using a research-through-design approach in which the author has conducted practical design work in order to investigate and experiment with using materials to scaffold design inquiry. The results of the PhD work is submitted as seven separate papers, submitted to esteemed journals...... and conferences within the field of interaction design and HCI. The work is motivated both by the growing interest in materials in interaction design and HCI and the interest in design processes and collaboration within those fields. At the core of the dissertation lies an interest in the many different materials...

The Confusion about CLV in Case-Based Teaching Materials

Science.gov (United States)

Bendle, Neil T.; Bagga, Charan K.

2017-01-01

The authors review 33 cases and related materials to understand how customer lifetime value (CLV) is taught. The authors examine (a) whether CLV is calculated using something other than contribution (e.g., revenue), (b) whether discounting is used, and (c) whether acquisition costs are subtracted before reporting CLV. The authors show considerable…

Data about shipping of radioactive material for medical use; Datos sobre los envios de material radioactivo para uso medico

Energy Technology Data Exchange (ETDEWEB)

Sanches, M.P.; Rodrigues, D.L. [Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN, Comissao Nacional de Energia Nuclear - CNEN/SP, Av.Professor Lineu Prestes No. 2242, Zip Code 05508-000, Sao Paulo (Brazil)]. e-mail: msanches@ipen.br

2006-07-01

The transport of radioactive materials implies a risk for the personnel of the team, those members of the public and the environment. While the safety in the transports is based on the designs of the bulks, the programs of radiological protection are important to assure the radiological control to the workers, the public and the environment during the transport of these materials. Although the biggest interest in the transport of radioactive materials it spreads to be centered in the nuclear industry, the transport in great measure it happens for the materials of medical use. These are mainly transported in bulks of the A Type and excepted bulks. The transport ones are forced, by national regulations, to send to the competent authority, in our case the National Comissao of Nuclear Energy (CNEN), all the data of the transported materials. This work has by objective to aim the efforts made to settle down and to manage the data regarding the transported radioactive materials. The existent data in the Radiopharmaceuticals Center, of the Institute of Energy and Nuclear Investigations 'IPEN/CNEN' it contains the information on all the radioactive materials consigned for the transport during every year. A statistic of the number of deliveries of the radioactive material for the period from 2001 to 2005 is provided. Based on this statistic its are presented the number of bulks, the quantity of activity and the ways of the transport for the period in study. (Author)

Radioactive material accidents in the transport

International Nuclear Information System (INIS)

Rodrigues, D.L.; Magalhaes, M.H.; Sanches, M.P.; Sordi, G.M.A.A.

2008-01-01

Transport is an important part of the worldwide nuclear industry and the safety record for nuclear transport across the world is excellent. The increase in the use of radioactive materials in our country requires that these materials be moved from production sites to the end user. Despite the number of packages transported, the number of incidents and accidents in which they are involved is low. In Brazil, do not be records of victims of the radiation as a result of the transport of radioactive materials and either due to the accidents happened during the transports. The absence of victims of the radiation as result of accidents during the transports is a highly significant fact, mainly to consider that annually approximately two hundred a thousand packages containing radioactive material are consigned for transport throughout the country, of which eighty a thousand are for a medical use. This is due to well-founded regulations developed by governmental and intergovernmental organizations and to the professionalism of those in the industry. In this paper, an overview is presented of the activities related to the transport of radioactive material in the state of Sao Paulo. The applicable legislation, the responsibilities and tasks of the competent authorities are discussed. The categories of radioactive materials transported and the packaging requirements for the safe transport of these radioactive materials are also described. It also presents the packages amounts of carried and the accidents occurred during the transport of radioactive materials, in the last five years. The main occurred events are argued, demonstrating that the demanded requirements of security for any transport of radioactive material are enough to guarantee the necessary control of ionizing radiation expositions to transport workers, members of general public and the environment. (author)

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Author Affiliations. I Gunes1 K Keddam2 R Chegroune2 M Ozcatal1. Department of Metallurgical and Materials Engineering, Faculty of Technology, Afyon Kocatepe University, 03200 Afyonkarahisar, Turkey; Laboratory of Materials Technology, Faculty of Mechanical Engineering and Process Engineering, USTHB, B.P. No.

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Author Affiliations. Sanjay Panwar1 D B Goel2 O P Pandey1. School of Physics and Materials Science, Thapar Institute of Engineering & Technology, Patiala 147 004, India; Department of Metallurgical and Materials Engineering, Indian Institute of Technology Roorkee, Roorkee 247 667, India ...

Impact of Universities' Promotional Materials on College Choice.

Science.gov (United States)

Armstrong, Jami J.; Lumsden, D. Barry

1999-01-01

Evaluated the impact of printed promotional materials on the recruitment of college freshmen using focus groups of students attending a large, southern metropolitan university. Students provided detailed suggestions on ways to improve the method of distribution, graphic design, and content of the materials. (Author/DB)

Safeguards and Nuclear Material Management

International Nuclear Information System (INIS)

Stanchi, L.

1991-01-01

The book contains contributed papers from various authors on the following subjects: Safeguards systems and implementation, Measurement techniques: general, Measurement techniques: destructive analysis, Measurement techniques: non-destructive assay, Containment and surveillance, Spent fuel strategies, Material accounting and data evaluation

Development of radioactive materials inspection system

International Nuclear Information System (INIS)

Yang Lu; Wang Guobao; Chen Yuhua; Li Latu; Zhang Sujing

2005-01-01

Radioactive materials inspection system which is applied to inspect the horror activities of radioactive materials and its illegal transfer. The detector sections are made of highly stable and credible material. It has high sensitivity to radioactive materials. The inspect lowest limit of inspection is the 2-3 times to the background, the energy range is 30 keV-2.5 MeV and the response time is 0.5 s. Inspection message can be transmitted through wired or wireless web to implement remote control. The structure of the system is small, light and convenient. It is ideal for protecting society and public from the harm of the radiation. (authors)

Internal accounting system for feed materials in the plutonium fuel fabrication complex at Cadarache

International Nuclear Information System (INIS)

Arnal, T.; Guillet, H.

1976-01-01

The internal accounting system of the Fabrication and Radiometallurgical Inspection Service (SFER) is basically designed to meet national and international requirements for nuclear materials accountancy as applied to feed materials. The authors discuss the principles underlying this accounting system for the case of the Plutonium Fuel Assembly Fabrication Complex at Cadarache. The sphere of application of the system covers more than 200 work stations and approximately 100 different materials. Some 20000 movements of feed materials per year represent transfers of a cumulative mass much greater than one ton of fissile material. A data processing system has therefore become essential in order to ensure the rapid and reliable acquisition of accounting data relating to these movements. The authors describe the system (definition of stations and material codes, description of supporting facilities used) and discuss the mode of acquisition with particular reference to relative speed of action. In conclusion, the authors indicate that the system offers interesting possibilities, in addition to its original purpose, in the following areas: Preparation of material balances; compliance with safety regulations to avert the risk of criticality; discouragement of possible diversion. (author)

INVESTIGATION AUTHORITIES OF FINANCIAL SERVICES AUTHORITY IN SYARIAH BANKING

Directory of Open Access Journals (Sweden)

Hamsir

2015-01-01

Full Text Available This paper aims to explore the authority of the FSA as one of the institutions that deal with crime investigation in banking institutions, especially in Islamic Banking. Investigators FSA has great authority other than the authority to conduct investigations that are not owned by other investigators. The existence of this authority would lead to overlapping investigation with a given investigation agencies such as the police and the prosecutor. Fundamental problems are experienced by the FSA in conducting the investigation is less availability of human resources of FSA investigator. Therefore, inevitably required cooperation with the Police in effecting the FSA investigation. Effectiveness of investigations conducted by the FSA task for banking crimes that occurred in Islamic Banking is need synergy of communication and coordination with the DSN as an institution authorized by the Islamic Banking Act to provide recommendations to other agencies including the FSA if there is suspicion of a criminal offense in Islamic Banking.

An introduction to the materials' knowledge

International Nuclear Information System (INIS)

Fortis, A.M.

1991-01-01

The purpose of this course is to approach those that have never had special studies to certain subjects of the materials science, specially to the metallurgy. It is intented that the students get accuracy in the usual terminology and fix concepts such as hardeness, ductility, thoughness, rigidity, etc. Also they will be introduced to the knowledge of the mechanical, thermal and electrical properties of different materials (metals, ceramics, polimers, etc.). The course is suitable to those who need the basic tools to work as auxiliar personnel in a materials laboratory. (Author) [es

Finite element analysis of piezoelectric materials

International Nuclear Information System (INIS)

Lowrie, F.; Stewart, M.; Cain, M.; Gee, M.

1999-01-01

This guide is intended to help people wanting to do finite element analysis of piezoelectric materials by answering some of the questions that are peculiar to piezoelectric materials. The document is not intended as a complete beginners guide for finite element analysis in general as this is better dealt with by the individual software producers. The guide is based around the commercial package ANSYS as this is a popular package amongst piezoelectric material users, however much of the information will still be useful to users of other finite element codes. (author)

Graphite materials for nuclear reactors

International Nuclear Information System (INIS)

Oku, Tatsuo

1991-01-01

Graphite materials have been used in the nuclear fission reactors from the beginning of the reactor development for the speed reduction and reflection of neutron. Graphite materials are used both as a moderator and as a reflector in the core of high temperature gas-cooled reactors, and both as a radiation shielding material and as a reflector in the surrounding of the core for the fast breeder reactor. On the other hand, graphite materials are being positively used as a first wall of plasma as it is known that low Z materials are useful for holding high temperature plasma in the nuclear fusion devices. In this paper the present status of the application of graphite materials to the nuclear fission reactors and fusion devices (reactors) is presented. In addition, a part of results on the related properties to the structural design and safety evaluation and results examined on the subjects that should be done in the future are also described. (author)

Method for selecting raw materials to preparing ceramic masses: application to raw material for red ceramic

International Nuclear Information System (INIS)

Moreno, Maria Margarita Torres; Rocha, Rogers Raphael da; Zanard, Antenor

2012-01-01

We studied the raw materials used in a factory building blocks, located in Cesario Lange city (SP). It extracts raw materials from various sources in the region to make the dough. The mixtures were prepared from dry milled powders based on data related to the plasticity of the raw materials. It was obtained with the apparatus Vicat-cone in order to obtain similar levels of water absorption of the samples burned at 900 deg C for all compositions. To quantify the proportion of each clay was used the Lever Rule. In this firing temperature, where sintering is mainly by diffusion from a solid state, different compositions of the same set of four raw materials resulted in similar values. (author)

Nuclear technology and materials science

International Nuclear Information System (INIS)

Olander, D.R.

1992-01-01

Current and expected problems in the materials of nuclear technology are reviewed. In the fuel elements of LWRs, cladding waterside corrosion, secondary hydriding and pellet-cladding interaction may be significant impediments to extended burnup. In the fuel, fission gas release remains a key issue. Materials issues in the structural alloys of the primary system include stress-corrosion cracking of steel, corrosion of steam generator tubing and pressurized thermal shock of the reactor vessel. Prediction of core behavior in severe accidents requires basic data and models for fuel liquefaction, aerosol formation, fission product transport and core-concrete interaction. Materials questions in nuclear waste management and fusion technology are briefly reviewed. (author)

The problem of material accountancy. Difference between the international material accountancy and the Japanese material accountancy

International Nuclear Information System (INIS)

Ikawa, Koji

2001-01-01

It has been 30 years since the development of SSAC (State's system of Accounting for and Control of nuclear material) of Japan began. Moreover, 24 years have been passed after SSAC was employed. The maintenance on the law for carrying out SSAC in the meantime also progressed, and the system of SSAC has also been established favorably. However, new correspondence was internationally called for about the safeguards for reprocessing facilities or uranium enrichment facilities, and innovative safeguards concepts like NRTA or LFUA were developed. The LASCAR (Large Scale Reprocessing Plant Safeguards) forum was held on the safeguards for a large scale reprocessing facility, and international agreement on the safeguards was progressed. When we look back upon the history of such safeguards development in recent years, most people can see little problem on the contents of the national safeguards system itself. As the history shows, however, the passive approach has been taken in developing the Japanese safeguards system. We have always tried to seek a solution on the basis 'What is the minimum requirement in order to receive international safeguards.' Now, the nuclear fuel cycle of Japan has reached the maximum scale in the world. To Japan which promotes commercial use of plutonium, the world community is supervising this severely. Under such a situation it is no doubt that passive safeguards correspondence can no longer be allowed. The author thinks that it is coming when the old nuclear management system completed based on a passive attitude should be improved. What should an active nuclear material management system be? In this presentation, the author wishes to explore the clue to it. (author)

Muon radiography technology for detecting high-Z materials

International Nuclear Information System (INIS)

Ma Lingling; Wang Wenxin; Zhou Jianrong; Sun Shaohua; Liu Zuoye; Li Lu; Du Hongchuan; Zhang Xiaodong; Hu Bitao

2010-01-01

This paper studies the possibility of using the scattering of cosmic muons to identify threatening high-Z materials. Various scenarios of threat material detection are simulated with the Geant4 toolkit. PoCA (Point of Closest Approach) algorithm reconstructing muon track gives 3D radiography images of the target material. Z-discrimination capability, effects of the placement of high-Z materials, shielding materials inside the cargo, and spatial resolution of position sensitive detector for muon radiography are carefully studied. Our results show that a detector position resolution of 50 μm is good enough for shielded materials detection. (authors)

Iron phosphate materials as cathodes for lithium batteries

CERN Document Server

Prosini, Pier Paolo

2011-01-01

""Iron Phosphate Materials as Cathodes for Lithium Batteries"" describes the synthesis and the chemical-physical characteristics of iron phosphates, and presents methods of making LiFePO4 a suitable cathode material for lithium-ion batteries. The author studies carbon's ability to increase conductivity and to decrease material grain size, as well as investigating the electrochemical behaviour of the materials obtained. ""Iron Phosphate Materials as Cathodes for Lithium Batteries"" also proposes a model to explain lithium insertion/extraction in LiFePO4 and to predict voltage profiles at variou

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Bulletin of Materials Science; Volume 31; Issue 1. Pressure induced graft-co-polymerization of acrylonitrile onto Saccharum cilliare fibre and ... Author Affiliations. A S Singha1 Anjali Shama1 Vijay Kumar Thakur1. Material Science Laboratory, National Institute of Technology, Hamirpur 177 005, India ...

South African Medical Journal - Vol 47, No 9 (1973)

African Journals Online (AJOL)

Generalised left ventricular dysfunction after traumatic right coronary artery - right atrial fistula · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. BS Lewis, EU Kurklu, A Bakst, BJ Henderson, NMA Rogers, MS Gotsman ...

Effects of chemopreventive agents on the incidence of recurrent colorectal adenomas: a systematic review with network meta-analysis of randomized controlled trials

Directory of Open Access Journals (Sweden)

Veettil SK

2017-05-01

Full Text Available Sajesh K Veettil,1 Nattawat Teerawattanapong,2 Siew Mooi Ching,3,4 Kean Ghee Lim,5 Surasak Saokaew,6–9 Pochamana Phisalprapa,10 Nathorn Chaiyakunapruk7,8,11,12 1School of Pharmacy/School of Postgraduate Studies, International Medical University, Kuala Lumpur, Malaysia; 2Division of Pharmacy Practice, Faculty of Pharmaceutical Sciences, Ubon Ratchathani University, Ubon Ratchathani, Thailand; 3Department of Family Medicine, Faculty of Medicine and Health Sciences, 4Malaysian Research Institute on Ageing, Universiti Putra Malaysia, Serdang, 5Clinical School, Department of Surgery, International Medical University, Seremban, Negeri Sembilan, 6Center of Health Outcomes Research and Therapeutic Safety (Cohorts, School of Pharmaceutical Sciences, University of Phayao, Phayao, 7School of Pharmacy, Monash University Malaysia, Selangor, Malaysia; 8Centre of Pharmaceutical Outcomes Research, Department of Pharmacy Practice, Faculty of Pharmaceutical Sciences, Naresuan University, Phitsanulok, Thailand; 9Unit of Excellence on Herbal Medicine, School of Pharmaceutical Sciences, University of Phayao, Thailand; 10Division of Ambulatory Medicine, Department of Medicine, Faculty of Medicine Siriraj Hospital, Mahidol University, Bangkok, 11School of Pharmacy, University of Wisconsin, Madison, USA; 12Health and Well-being Cluster, Global Asia Platform in the 21st Century (GA21 Platform, Monash University Malaysia, Selangor, Malaysia Background: Protective effects of several chemopreventive agents (CPAs against colorectal adenomas have been well documented in randomized controlled trials (RCTs; however, there is uncertainty regarding which agents are the most effective.Methods: We searched for RCTs published up until September 2016. Retrieved trials were evaluated using risk of bias. We performed both pairwise analysis and network meta-analysis (NMA of RCTs to compare the effects of CPAs on the recurrence of colorectal adenomas (primary outcome. Using NMA, we

Considerations regarding procurement activities in institutions of local authority

OpenAIRE

Mãdãlina ALBU

2013-01-01

Objectives which they propose a public authority requires, among others, providing the necessary resources, including the material occupy a large proportion. This is done through the public procurement system. The procurement is part of the legal and economic reality of the Romanian society and covers all rules and actions on public spending and the application launched by public bodies meets the proposed offer of an operator. This paper presents an analysis of the public procurement system i...

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... An algorithm to retrieve Land Surface Temperature using Landsat-8 Dataset Abstract PDF. ISSN: 2225-8531.

78 FR 25678 - Georgia: Final Authorization of State Hazardous Waste Management Program Revisions

Science.gov (United States)

2013-05-02

...: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental... of changes to its hazardous waste program under the Resource Conservation and Recovery Act (RCRA... Gwendolyn Gleaton, Permits and State Programs Section, RCRA Programs and Materials Management Branch, RCRA...

76 FR 6594 - Florida: Final Authorization of State Hazardous Waste Management Program Revisions

Science.gov (United States)

2011-02-07

...: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental... of the changes to its hazardous waste program under the Resource Conservation and Recovery Act (RCRA... and State Programs Section, RCRA Programs and Materials Management Branch, RCRA Division, U.S...

77 FR 60963 - Tennessee: Final Authorization of State Hazardous Waste Management Program Revisions

Science.gov (United States)

2012-10-05

...: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental... of the changes to its hazardous waste program under the Resource Conservation and Recovery Act (RCRA... Johnson, Permits and State Programs Section, RCRA Programs and Materials Management Branch, RCRA Division...

Physical protection of nuclear materials and facilities in CEA

International Nuclear Information System (INIS)

Garnier-Gratia, M.-H.; Jorda, A.

2001-01-01

Full text: CEA (Commissariat a l'Energie Atomique), as nuclear operator, is responsible for the control and protection of their nuclear materials. Inside CEA, DCS (Central Security Division) is in charge of the security matters, DCS defines the CEA strategy in this field, especially in physical protection. The paper will present the physical protection strategy of CEA. DCS defines the rules and methods; the operators have to apply in order to fulfill the security objectives of CEA. CEA has to provide the regulatory authority with documents proving that it is in accordance with the requirements of the 25th July 1980 law and 12th May 1981 decree. It has to implement all the necessary means in order to achieve the results requested by the regulatory authority. All these arrangements are described in the 'license and control file'. This file should specify the facility safeguards and physical protection system. Accounting measures are also described. In this file, the petitioner has to justify its capacity for holding nuclear materials and for exercising authorized activities on them. So the organization and the installed means have to be described in this authorization file. For physical protection, containment, surveillance and physical protection measures are presented: Containment measures must prevent the unauthorized or unjustified movements of nuclear material in the framework of the authorized activities; Surveillance measures must guarantee the integrity of the containment, check that no material is exiting by an abnormal channel; Physical protection measures for the materials, the premises and the facilities are intended to protect them against malevolent actions by means of security systems. The Central Security Division has established guidelines to provide guidance to the nuclear materials holders in writing such files. Each holding unit has to establish a 'license and control file' and each CEA site establishes a 'site license and control file

Expanding UCR’s Interdisciplinary Materials Science and Engineering Faculty

Science.gov (United States)

2018-02-27

and Engineering Faculty 5a. CONTRACT NUMBER 5b. GRANT NUMBER N00014-16-1-2298 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Cindy Larive, Provost Shane...Cybart, Assistant Professor Mitch Boretz, Office of the Dean, Bourns College of Engineering 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT...the Materials Science and Engineering program. Dr. Cybart’s expertise is in superconducting materials, specifically complex oxide devices. His work has

SMART MATERIALS AS MODERN ENGINEERING SUBSTANCES

Directory of Open Access Journals (Sweden)

Adam Ćwikła

2013-03-01

Full Text Available The article presents the type and use of intelligent materials in aviation and medicine. Their basic features and properties have been discussed. Moreover, the authors quote examples of different uses of intelligent materials, both the existing ones and those in design and development stages. Their use is claimed to be increasing the efficiency and reliability of processes and equipment as well as facilitates the development of new mechanisms.

Development of solid water-equivalent radioactive certified reference materials

International Nuclear Information System (INIS)

Finke, E.; Greupner, H.; Groche, K.; Rittwag, R.; Geske, G.

1991-01-01

This paper presents a brief description of the development of solid water-equivalent beta volume radioactive certified reference materials. These certified reference materials were prepared for the beta fission nuclides 90 Sr/ 90 Y, 137 Cs, 147 Pm and 204 Tl. Comparative measurements of liquid and solid water-equivalent beta volume radioactive certified reference materials are discussed. (author)

Bulletin of Materials Science | News

Indian Academy of Sciences (India)

Author Affiliations. V V Deshpande1 M M Patil1 S C Navale2 V Ravi1. Physical and Materials Chemistry Division, National Chemical Laboratory, Pune 411 008, India; Polymer Science and Engineering Division, National Chemical Laboratory, Pune 411 008, India ...

SRS K-area material storage. Expanding capabilities

International Nuclear Information System (INIS)

Koenig, R.

2013-01-01

In support of the Department of Energy’s continued plans to de-inventory and reduce the footprint of Cold War era weapons’ material production sites, the K-Area Material Storage (KAMS) facility, located in the K-Area Complex (KAC) at the Savannah River Site reservation, has expanded since its startup authorization in 2000 to accommodate DOE’s material consolidation mission. During the facility’s growth and expansion, KAMS will have expanded its authorization capability of material types and storage containers to allow up to 8200 total shipping containers once the current expansion effort completes in 2014. Recognizing the need to safely and cost effectively manage other surplus material across the DOE Complex, KAC is constantly evaluating the storage of different material types within K area. When modifying storage areas in KAC, the Documented Safety Analysis (DSA) must undergo extensive calculations and reviews; however, without an extensive and proven security posture the possibility for expansion would not be possible. The KAC maintains the strictest adherence to safety and security requirements for all the SNM it handles. Disciplined Conduct of Operations and Conduct of Projects are demonstrated throughout this historical overview highlighting various improvements in capability, capacity, demonstrated cost effectiveness and utilization of the KAC as the DOE Center of Excellence for safe and secure storage of surplus SNM.

Asian Americans and materialism: Exploring the phenomenon and its why and when.

Science.gov (United States)

Zhang, Jia Wei

2018-05-24

Consumer values, including but not limited to materialism, have received much less attention than other topics within research on Asian Americans. Across 3 studies (N = 6,955), the author explored the difference between Asian Americans and White/European Americans on materialism, and the mediating and moderating mechanisms. Studies 1a-1c found Asian Americans, compared to White/European Americans, more strongly endorsed materialistic values. In Study 2, the author tested a multiple mediation model and demonstrated that Asian Americans, compared to White/European Americans, more strongly endorse materialistic values because they reported higher extrinsic aspirations (i.e., stronger desires for money, image, and popularity). Finally, in Study 3, the author tested a moderation model and found that Asian Americans who are higher on a general tendency to adhere to norms endorse a greater level of materialism than White/European Americans. The author discussed how these results have implications for expanding the research topics within research on Asian Americans, consequences for mental health and provide future directions to counteract materialism. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

7 CFR 2.3 - Authority of the Secretary to delegate authority.

Science.gov (United States)

2010-01-01

... Section 2.3 Agriculture Office of the Secretary of Agriculture DELEGATIONS OF AUTHORITY BY THE SECRETARY... delegate authority. (a) The general authority of the Secretary to make delegations of his authority is... the performance by any other officer, or by an agency or employee, of the Department of Agriculture of...

Author Details

African Journals Online (AJOL)

PROMOTING ACCESS TO AFRICAN RESEARCH. AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES. Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads.

Materials for superconducting cavities

International Nuclear Information System (INIS)

Bonin, B.

1996-01-01

The ideal material for superconducting cavities should exhibit a high critical temperature, a high critical field, and, above all, a low surface resistance. Unfortunately, these requirements can be conflicting and a compromise has to be found. To date, most superconducting cavities for accelerators are made of niobium. The reasons for this choice are discussed. Thin films of other materials such as NbN, Nb 3 Sn, or even YBCO compounds can also be envisaged and are presently investigated in various laboratories. It is shown that their success will depend critically on the crystalline perfection of these films. (author)

Applications of inorganic ion-exchange materials in managing radioactivity wastewater

International Nuclear Information System (INIS)

He Jiaheng; Li Xingliang; Li Shoujian

2007-01-01

This article introduces the application of abio-ion exchange materials in managing radioactivity wastewater, which would be useful for latter research of new inorganic materials that used in managing radioactivity wastewater. (authors)

Materials irradiation research in neutron science

Energy Technology Data Exchange (ETDEWEB)

Noda, Kenji; Oyama, Yukio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1997-11-01

Materials irradiation researches are planned in Neutron Science Research Program. A materials irradiation facility has been conceived as one of facilities in the concept of Neutron Science Research Center at JAERI. The neutron irradiation field of the facility is characterized by high flux of spallation neutrons with very wide energy range up to several hundred MeV, good accessibility to the irradiation field, good controllability of irradiation conditions, etc. Extensive use of such a materials irradiation facility is expected for fundamental materials irradiation researches and R and D of nuclear energy systems such as accelerator-driven incineration plant for long-lifetime nuclear waste. In this paper, outline concept of the materials irradiation facility, characteristics of the irradiation field, preliminary technical evaluation of target to generate spallation neutrons, and materials researches expected for Neutron Science Research program are described. (author)

Author Correction

DEFF Research Database (Denmark)

Gröbner, Susanne N; Worst, Barbara C; Weischenfeldt, Joachim

2018-01-01

In this Article, author Benedikt Brors was erroneously associated with affiliation number '8' (Department of Developmental Neurobiology, St Jude Children's Research Hospital, Memphis, Tennessee, USA); the author's two other affiliations (affiliations '3' and '7', both at the German Cancer Researc...

The safe transport of radioactive materials

International Nuclear Information System (INIS)

Messenger, W. de L.M.

1979-02-01

The hazards of radioactive materials in transport are surveyed. The system whereby they are safely transported between nuclear establishments in the United Kingdom and overseas is outlined. Several popular misconceptions are dealt with. (author)

Improving the readability of online foot and ankle patient education materials.

Science.gov (United States)

Sheppard, Evan D; Hyde, Zane; Florence, Mason N; McGwin, Gerald; Kirchner, John S; Ponce, Brent A

2014-12-01

Previous studies have shown the need for improving the readability of many patient education materials to increase patient comprehension. This study's purpose was to determine the readability of foot and ankle patient education materials and to determine the extent readability can be improved. We hypothesized that the reading levels would be above the recommended guidelines and that decreasing the sentence length would also decrease the reading level of these patient educational materials. Patient education materials from online public sources were collected. The readability of these articles was assessed by a readability software program. The detailed instructions provided by the National Institutes of Health (NIH) were then used as a guideline for performing edits to help improve the readability of selected articles. The most quantitative guideline, lowering all sentences to less than 15 words, was chosen to show the effect of following the NIH recommendations. The reading levels of the sampled articles were above the sixth to seventh grade recommendations of the NIH. The MedlinePlus website, which is a part of the NIH website, had the lowest reading level (8.1). The articles edited had an average reduction of 1.41 grade levels, with the lowest reduction in the Medline articles of 0.65. Providing detailed instructions to the authors writing these patient education articles and implementing editing techniques based on previous recommendations could lead to an improvement in the readability of patient education materials. This study provides authors of patient education materials with simple editing techniques that will allow for the improvement in the readability of online patient educational materials. The improvement in readability will provide patients with more comprehendible education materials that can strengthen patient awareness of medical problems and treatments. © The Author(s) 2014.

Regulations related to the transport of radioactive material in Brazil

International Nuclear Information System (INIS)

Sahyun, Adelia; Sordi, Gian-Maria A.A.; Sanches, Matias P.

2001-01-01

The transport of radioactive material has raised great interest on the part of national regulatory authorities, thus resulting in a safety measures improvement for all kinds of transportation. The transport of radioactive material is regulated by safety criteria much more than those applied to conventional hazardous material. All radioactive material transportation run in Brazilian territory must be in accordance with what is established by the CNEN-NE 5.01 - Transport of Radioactive Material. There are other national and international regulations for radioactive material transportation, which have to be accomplished with and adopted during the operation of radioactive material transportation. The aim of this paper is to verify the criteria set up in the existing regulations and propose a consensus for all the intervening organizations in the regulation process for land, air or sea transportation. This kind of transportation can not depend on the efforts of only one person, a group of workers or even any governmental body, but must be instead a shared responsibility among workers, transport firms and all regulative transportation organizations. (author)

Selection of materials with potential in sensible thermal energy storage

International Nuclear Information System (INIS)

Fernandez, A.I.; Martinez, M.; Segarra, M.; Martorell, I.; Cabeza, L.F.

2010-01-01

Thermal energy storage is a technology under investigation since the early 1970s. Since then, numerous new applications have been found and much work has been done to bring this technology to the market. Nevertheless, the materials used either for latent or for sensible storage were mostly investigated 30 years ago, and the research has lead to improvement in their performance under different conditions of applications. In those years a significant number of new materials were developed in many fields other than storage and energy, but a great effort to characterize and classify these materials was done. Taking into account the fact that thousands of materials are known and a large number of new materials are developed every year, the authors use the methodology for materials selection developed by Prof. Ashby to give an overview of other materials suitable to be used in thermal energy storage. Sensible heat storage at temperatures between 150 and 200 C is defined as a case study and two different scenarios were considered: long term sensible heat storage and short term sensible heat storage. (author)

Regulations related to the transport of radioactive material in Brazil

Energy Technology Data Exchange (ETDEWEB)

Sahyun, Adelia; Sordi, Gian-Maria A.A. [ATOMO Radioprotecao e Seguranca Nuclear, Sao Paulo, SP (Brazil)]. E-mail: atomo@atomo.com.br; Sanches, Matias P. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)]. E-mail: msanches@net.ipen.br

2001-07-01

The transport of radioactive material has raised great interest on the part of national regulatory authorities, thus resulting in a safety measures improvement for all kinds of transportation. The transport of radioactive material is regulated by safety criteria much more than those applied to conventional hazardous material. All radioactive material transportation run in Brazilian territory must be in accordance with what is established by the CNEN-NE 5.01 - Transport of Radioactive Material. There are other national and international regulations for radioactive material transportation, which have to be accomplished with and adopted during the operation of radioactive material transportation. The aim of this paper is to verify the criteria set up in the existing regulations and propose a consensus for all the intervening organizations in the regulation process for land, air or sea transportation. This kind of transportation can not depend on the efforts of only one person, a group of workers or even any governmental body, but must be instead a shared responsibility among workers, transport firms and all regulative transportation organizations. (author)

FBR metallic materials test manual (English version)

International Nuclear Information System (INIS)

Odaka, Susumu; Kato, Shoichi; Yoshida, Eiichi

2003-06-01

For the development of the fast breeder reactor, this manual describes the method of in-air and in-sodium material tests and the method of organization the data. This previous manual has revised in accordance with the revision of Japanese Industrial Standard (JIS) and the conversion to the international unit. The test methods of domestic committees such as the VAMAS (Versailles Project on Advanced Materials and Standards) workshop were also refereed. The material test technologies accumulated in this group until now were also incorporated. This English version was prepared in order to provide more engineers with the FBR metallic materials test manual. (author)

Small-angle scattering in materials science

International Nuclear Information System (INIS)

Paris, O.; Fratzl, P.

1999-01-01

Small-angle scattering (SAS) of X-rays (SAXS) or neutrons (SANS) are a powerful tools to investigate inhomogeneities in the size range from ∼ 1 nm to ∼ 100 nm. Typical examples in materials science are pores, precipitates in metal alloys or nano-particles in composites. Frequently, these inhomogeneities are not spherical and their alignment is not random, quite in contrast to many other applications of SAS. This requires the use of pinhole geometry and area detectors for the experimental set-up. The present paper focuses on evaluation techniques of two-dimensional (2D) SAS-patterns from some materials investigated by the authors, i.e. metal alloys, carbon composites, wood and bone. Although the examples shown are derived exclusively from SAXS measurements, most of them could stem from SANS measurements as well. (author)

Glass-Graphite Composite Materials

International Nuclear Information System (INIS)

Mayzan, M.Z.H.; Lloyd, J.W.; Heath, P.G.; Stennett, M.C.; Hyatt, N.C.; Hand, R.J.

2016-01-01

A summary is presented of investigations into the potential of producing glass-composite materials for the immobilisation of graphite or other carbonaceous materials arising from nuclear power generation. The methods are primarily based on the production of base glasses which are subsequently sintered with powdered graphite or simulant TRISO particles. Consideration is also given to the direct preparation of glass-graphite composite materials using microwave technology. Production of dense composite wasteforms with TRISO particles was more successful than with powdered graphite, as wasteforms containing larger amounts of graphite were resistant to densification and the glasses tried did not penetrate the pores under the pressureless conditions used. Based on the results obtained it is concluded that the production of dense glassgraphite composite wasteforms will require the application of pressure. (author)

Materials for high temperature reactor vessels

International Nuclear Information System (INIS)

Buenaventura Pouyfaucon, A.

2004-01-01

Within the 5th Euraton Framework Programme, a big effort is being made to promote and consolidate the development of the High Temperature Reactor (HTR). Empresarios Agrupados is participating in this project and among others, also forms part of the HTR-M project Materials for HTRs. This paper summarises the work carried out by Empresarios Agrupados regarding the material selection of the HTR Reactor Pressure Vessel (RPV). The possible candidate materials and the most promising ones are discussed. Design aspects such as the RPV sensitive zones and material damage mechanisms are considered. Finally, the applicability of the existing design Codes and Standards for the design of the HTR RPV is also discussed. (Author)

Regulation of naturally occurring radioactive materials in non-nuclear industries

International Nuclear Information System (INIS)

Scott, L.M.

1997-01-01

The volume and concentrations of naturally occurring radioactive material is large across a variety of industries commonly thought not to involve radioactive material. The regulation of naturally occurring radioactive material in the United States is in a state of flux. Inventory of naturally occurring radioactive materials is given, along with a range of concentrations. Current and proposed regulatory limits are presented. (author)

Education of the Strength of Materials in College of Technology

Science.gov (United States)

Shimaoka, Mitsuyoshi

The Strength of Materials comprises not only mechanics of solids, which are not limited to elastic deformation, but also materials testing. Because the students who belong to the author's department have little knowledge about the materials' characteristics, they imagine that this subject is difficult. In this paper, it is discussed how to make the students understand the essential and some important points of this subject. For students in college of technology, the author points out that the lecture concentrating on the elastic deformation of solid members is most important and that the basic mathematics used in this subject must be explained once again early in this lesson.

Comparative safety of antiepileptic drugs for neurological development in children exposed during pregnancy and breast feeding: a systematic review and network meta-analysis

Science.gov (United States)

Veroniki, Areti Angeliki; Rios, Patricia; Cogo, Elise; Straus, Sharon E; Finkelstein, Yaron; Kealey, Ryan; Reynen, Emily; Soobiah, Charlene; Thavorn, Kednapa; Hutton, Brian; Hemmelgarn, Brenda R; Yazdi, Fatemeh; D'Souza, Jennifer; MacDonald, Heather; Tricco, Andrea C

2017-01-01

Objectives Compare the safety of antiepileptic drugs (AEDs) on neurodevelopment of infants/children exposed in utero or during breast feeding. Design and setting Systematic review and Bayesian random-effects network meta-analysis (NMA). MEDLINE, EMBASE and the Cochrane Central Register of Controlled Trials were searched until 27 April 2017. Screening, data abstraction and quality appraisal were completed in duplicate by independent reviewers. Participants 29 cohort studies including 5100 infants/children. Interventions Monotherapy and polytherapy AEDs including first-generation (carbamazepine, clobazam, clonazepam, ethosuximide, phenobarbital, phenytoin, primidone, valproate) and newer-generation (gabapentin, lamotrigine, levetiracetam, oxcarbazepine, topiramate, vigabatrin) AEDs. Epileptic women who did not receive AEDs during pregnancy or breast feeding served as the control group. Primary and secondary outcome measures Cognitive developmental delay and autism/dyspraxia were primary outcomes. Attention-deficit hyperactivity disorder, language delay, neonatal seizures, psychomotor developmental delay and social impairment were secondary outcomes. Results The NMA on cognitive developmental delay (11 cohort studies, 933 children, 18 treatments) suggested that among all AEDs only valproate was statistically significantly associated with more children experiencing cognitive developmental delay compared with control (OR=7.40, 95% credible interval (CrI) 3.00 to 18.46). The NMA on autism (5 cohort studies, 2551 children, 12 treatments) suggested that oxcarbazepine (OR 13.51, CrI 1.28 to 221.40), valproate (OR 17.29, 95% CrI 2.40 to 217.60), lamotrigine (OR 8.88, CrI 1.28 to 112.00) and lamotrigine+valproate (OR 132.70, CrI 7.41 to 3851.00) were associated with significantly greater odds of developing autism compared with control. The NMA on psychomotor developmental delay (11 cohort studies, 1145 children, 18 treatments) found that valproate (OR 4.16, CrI 2.04 to 8

Author Details

African Journals Online (AJOL)

Dagwa, IM. Vol 34, No 4 (2015) - Chemical, Industrial, Materials, Mechanical, Metallurgical, Petroleum & Production Engineering Tensile and Hardness Property Evaluation of Kaolin- Sisal Fibre- Epoxy Composite Abstract PDF · Vol 35, No 1 (2016) - Chemical, Industrial, Materials, Mechanical, Metallurgical, Petroleum ...

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Author Affiliations. Y M Z Ahmed1 S M El-Sheikh2 Z I Zaki1. Ceramic and Refractory Materials Division, Central Metallurgical Research and Development Institute, CMRDI, P.O. Box 87, 11421 Helwan, Egypt; Nano-structured Materials Division, Central Metallurgical Research and Development Institute, CMRDI, P.O. Box 87, ...

5 CFR 1312.28 - Transmission of classified material.

Science.gov (United States)

2010-01-01

... no identification of its contents. (a) Transmittal of Top Secret material. The transmittal of Top... means for Top Secret material, or transmit by U.S. Postal Service express or registered mail. (2) Other Areas. Use the same means authorized for Top Secret, or transmit by U.S. registered mail through...

Development of nuclear material accountancy control system

International Nuclear Information System (INIS)

Hirosawa, Naonori; Kashima, Sadamitsu; Akiba, Mitsunori

1992-01-01

PNC is developing a wide area of nuclear fuel cycle. Therefore, much nuclear material with a various form exists at each facility in the Works, and the controls of the inventory changes and the physical inventories of nuclear material are important. Nuclear material accountancy is a basic measure in safeguards system based on Non-Proliferation Treaty (NPT). In the light of such importance of material accountancy, the data base of nuclear material control and the material accountancy report system for all facilities has been developed by using the computer. By this system, accountancy report to STA is being presented certainly and timely. Property management and rapid corresponding to various inquiries can be carried out by the data base system which has free item searching procedure. (author)

Insulating materials resistance in intense radiation beams

International Nuclear Information System (INIS)

Oproiu, Constantin; Martin, Diana; Scarlat, Florin; Timus, Dan; Brasoveanu, Mirela; Nemtanu, Monica

2002-01-01

The paper emphasizes the main changes of the mechanical and electrical properties of some organic insulating materials exposed to accelerated electron beams. These materials are liable to be used in nuclear plants and particle accelerators. The principal mechanical and electrical properties analyzed were: tensile strength, fracture strength, tearing on fracture, dielectric strength, electrical resistivity, dielectric constant and tangent angle of dielectric losses. (authors)

Biodegradable electroactive materials for tissue engineering applications

Science.gov (United States)

Guimard, Nathalie Kathryn

This dissertation focuses on the development of biomaterials that could be used to enhance the regeneration of severed peripheral nerves. These materials were designed to be electroactive, biodegradable, and biocompatible. To render the materials electroactive the author chose to incorporate conducting polymer (CP) units into the materials. Because CPs are inherently non-degradable, the key challenge was to create a CP-based material that was also biodegradable. Two strategies were explored to generate a biodegradable CP-based material. The first strategy centered around the incorporation of both electroactive and biodegradable subunits into a copolymer system. In the context of this approach, two bis(methoxyquaterthiophene)-co-adipic acid polyester (QAPE) analogues were successfully synthesized, one through polycondensation (giving undoped QAPE) and the second through oxidative polymerization (giving doped QAPE-2). QAPE was found to be electroactive by cyclic voltammetry, bioerodible, and cytocompatible with Schwann cells. QAPE was doped with ferric perchlorate, although only a low doping percentage was realized (˜8%). Oxidative polymerization of a bis(bithiophene) adipate permitted the direct synthesis of doped QAPE-2, which was found to have a higher doping level (˜24%). The second strategy pursued with the goal of generating an electroactive biodegradable material involved covalently immobilizing low molecular weight polythiophene chains onto the surface of crosslinked hyaluronic acid (HA) films. HA films are not only biodegradable and biocompatible, but they also provide mechanical integrity to bilayer systems. Dicyclocarbodiimide coupling of carboxylic acids to HA alcohol groups was used to functionalize HA films. The HA-polythiophene composite is still in the early stages of development. However, to date, thiophene has been successfully immobilized at the surface of HA films with a high degree of substitution. The author has also shown that thiophene

Materials data base as an interface between fusion reactor designs and materials development

International Nuclear Information System (INIS)

Ishino, S.; Iwata, S.

1983-01-01

The materials data base is an integrated information system of experimental and/or calculated data of materials being compiled to meet the broad needs for materials data by taking advantage of the data base management systems. In this paper the objective of such computerized data base is described from the viewpoint of materials engineers and fusion system designers. Materials data spread themselves widely from the field that relates fundamental understanding of the behaviors of electrons, atoms, vacancies, dislocations and so on to the performance of components, devices, machines and systems. In our approach this information is described as ''relations'' by a set of tables which comprise related variables, for example, a set of values about essential properties for materials selection. This approach based on the relational model enables relational operations, i.e. SELECTION, PROJECTION, JOIN and so on, to select suitable materials, to set trade-off parameters for system designers and to establish design criteria. Stored data comprise (i) fundamental properties for all elements and potential structural materials, (ii) low cycle fatigue, irradiation creep and swelling data for type 316 stainless steels. These data have been selected and evaluated from critical reviews of existing data base of about 2 mega bytes data, some examples of materials selections and extraction of trade-off parameters are shown as a subject of critical issue concerning how to bridge the large gap between materials developments and system designs. (author)

National competent authorities. List no. 4. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

International Nuclear Information System (INIS)

1971-06-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities. List no. 17. Regulations for the safe transport of radioactive material. 1985 edition (Safety series no.6 )

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-12-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities. List no. 5. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

Energy Technology Data Exchange (ETDEWEB)

NONE

1972-09-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities. List no. 4. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

Energy Technology Data Exchange (ETDEWEB)

NONE

1971-06-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities. List no. 1. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

International Nuclear Information System (INIS)

1967-04-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities. List no. 2. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

International Nuclear Information System (INIS)

1968-08-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities. List no. 3. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

International Nuclear Information System (INIS)

1970-06-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities. List no. 17. Regulations for the safe transport of radioactive material. 1985 edition (Safety series no.6 )

International Nuclear Information System (INIS)

1985-12-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities. List no. 3. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

Energy Technology Data Exchange (ETDEWEB)

NONE

1970-06-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities. List no. 2. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

Energy Technology Data Exchange (ETDEWEB)

NONE

1968-08-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

National competent authorities. List no. 5. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

International Nuclear Information System (INIS)

1972-09-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

National competent authorities. List no. 1. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

Energy Technology Data Exchange (ETDEWEB)

NONE

1967-04-01

Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

Internal transfers of special nuclear material - March 1975

International Nuclear Information System (INIS)

Anon.

1976-01-01

Paragraph 70.51(e) of 10 CFR Part 70 requires, with certain exceptions stated in the rule, that each licensee authorized to possess more than one effective kilogram of special nuclear material (SNM) maintain certain procedures. These procedures are to include: (1) records of the quantities of SNM added to or removed from the process; (2) documentation of all transfers of SNM between material-balance areas to show the identity and quantity of SNM transferred; (3) requirements for authorized signatures on each document used to record the transfer of SNM between material-balance areas; and (4) means for control of and accounting for internal transfer documents. Paragraph 70.58(e) requires licensees to establish, maintain, and follow a system for measuring the SNM transferred between material-balance areas and item-control areas. Paragraph 70.58(f) requires that licensees have a program that evaluates and controls the quality of their measurement system. Additionally, all licensees authorized to possess SNM must comply with paragraph 70.51(b) of 10 CFR Part 70. That rule requires licensees to keep records showing, among other things, the inventory of all SNM in their possession and its location. This guide sets forth acceptable methods for controlling and documenting transfers of SNM within a plant site in order to meet the requirements listed above

Inscribing Authority: Female Title Bearers in Jewish Inscriptions

Directory of Open Access Journals (Sweden)

Carrie Duncan

2012-02-01

Full Text Available This paper investigates representations of gender in the material culture of the ancient synagogue. The pertinent data are numerous dedicatory and funerary inscriptions linking individual Jews, men and women, with titles seemingly associated with leadership in Late Antique synagogues (ca. 200–600 CE. Bernadette Brooten’s influential 1982 monograph argued against the prevailing tendency to characterize these titles as indications of power, authority, and responsibility when associated with men but as meaningless flattery when applied to women. She suggests that synagogue titles denote power, authority and responsibility on all title bearers equally, both men and women. I question the continued utility of proffering female title-holders as enumerable examples of powerful women rescued from their forgotten place in history. Using theoretical insights developed by historians Elizabeth Clark and Gabrielle Spiegel, this paper will engage a comparative analysis with the work of Riet van Bremen and Saba Mahmood to develop new methods of conceptualizing women’s authority in early Jewish communities. I propose that viewing women’s synagogue titles as culturally constructed representations allows for a fruitful inquiry into how women’s titles were used by male-dominated synagogue communities in their self-articulation and public presentation of Judaism.

Compliance assurance for the safe transport of radioactive material. Safety guide

International Nuclear Information System (INIS)

2009-01-01

The objectives of this Safety Guide are to assist competent authorities in the development and maintenance of compliance assurance programmes in connection with the transport of radioactive material, and to assist applicants, licensees and organizations in their interactions with competent authorities. In order to increase cooperation between competent authorities and to promote the uniform application of international regulations and recommendations, it is desirable to adopt a common approach to regulatory activities. This Safety Guide is intended to assist in accomplishing such a uniform application by recommending most of the actions for which competent authorities need to provide in their programmes for ensuring compliance with the Transport Regulations. This Safety Guide addresses radiation safety aspects of the transport of radioactive material; that is, the subjects that are covered by the Transport Regulations. Radioactive material may have other dangerous properties, however, such as explosiveness, flammability, pyrophoricity, chemical toxicity and corrosiveness; these properties are required to be taken into account in the regulatory control of the design and transport of packages. Physical protection and systems for accounting for and control of nuclear material are also discussed in this Safety Guide. These subjects are not within the scope of the Transport Regulations, but information on them is included here because they must be taken into account in the overall regulatory control of transport, especially when the regulatory framework is being established. Section 1 informs about the background, the objective, the scope and the structure of this publication. Section 2 provides recommendations on the responsibilities and functions of the competent authority. Section 3 provides information on the various national and international regulations and guides for the transport of radioactive material. Section 4 provides recommendations on carrying out

Energy demand for materials in an international context.

Science.gov (United States)

Worrell, Ernst; Carreon, Jesus Rosales

2017-06-13

Materials are everywhere and have determined society. The rapid increase in consumption of materials has led to an increase in the use of energy and release of greenhouse gas (GHG) emissions. Reducing emissions in material-producing industries is a key challenge. If all of industry switched to current best practices, the energy-efficiency improvement potential would be between 20% and 35% for most sectors. While these are considerable potentials, especially for sectors that have historically paid a lot of attention to energy-efficiency improvement, realization of these potentials under current 'business as usual' conditions is slow due to a large variety of barriers and limited efforts by industry and governments around the world. Importantly, the potentials are not sufficient to achieve the deep reductions in carbon emissions that will be necessary to stay within the climate boundaries as agreed in the 2015 Paris Conference of Parties. Other opportunities need to be included in the menu of options to mitigate GHG emissions. It is essential to develop integrated policies combining energy efficiency, renewable energy and material efficiency and material demand reduction, offering the most economically attractive way to realize deep reductions in carbon emissions.This article is part of the themed issue 'Material demand reduction'. © 2017 The Author(s).

Development of solid water-equivalent radioactive certified reference materials

Energy Technology Data Exchange (ETDEWEB)

Finke, E.; Greupner, H.; Groche, K.; Rittwag, R. (Office for Standardization, Metrology and Quality Control (ASMW), Berlin (Germany, F.R.)); Geske, G. (Jena Univ. (Germany, F.R.))

1991-01-01

This paper presents a brief description of the development of solid water-equivalent beta volume radioactive certified reference materials. These certified reference materials were prepared for the beta fission nuclides {sup 90}Sr/{sup 90}Y, {sup 137}Cs, {sup 147}Pm and {sup 204}Tl. Comparative measurements of liquid and solid water-equivalent beta volume radioactive certified reference materials are discussed. (author).

The development of shifting radioactive material

International Nuclear Information System (INIS)

Chen Haiteng; Chen Yonghong; Yin Fujun; Che Mingsheng; Hu Xiaodan; Yao Shouzhong

2010-01-01

In nuclear field, When the nuclear material shifting from the glove-box,use the technology of plastic welding package in accordance with tradition. There are some defects in this technology because of the plastic character, such as package pierced easily, wrapper not fitted storage for long term, etc. Because of this limit. Plastic shifting technology is only fit for shifting radwaste and nuclear material not need storage from radioactive close area to non-radioactive open area for long term.As the nuclear material exiting leak when shifting in plastic package,and the plastic material don't meet the need of storaging safely for long term.We research into a new technology of nuclear material shifting. When nuclear material is carried out from the glove box. It should be sealed by welding case, then it can be storaged safely for long term. At the same time, nuclear material wouldn't pollute the glove box outside.The study achieved well effect in apply. (authors)

Application of radiation-induced graft polymerization to preparation of functional materials

International Nuclear Information System (INIS)

Sugo, Takanobu

2010-01-01

Radiation-induced graft polymerization is a powerful method for appending various functionalities onto existing fabrics, nonwoven fabrics, fibers, membranes, and beads while maintaining the shape and mechanical strength. By using this method, the author has developed and commercialized functional polymeric materials over 45 years. The materials produced by the fruits of radiation chemistry contributed to the improvement of our lives and environments and the collection of rare metal resources. (author)

Author Details

African Journals Online (AJOL)

Osarenmwinda, JO. Vol 33, No 4 (2014) - Research papers. Design and Fabrication of a Foundry Sand Mixer Using Locally Available Materials Abstract PDF · Vol 34, No 2 (2015) - Chemical, Industrial, Materials, Mechanical, Metallurgical, Petroleum & Production Engineering Barrel Temperature Effects on the Mechanical ...

Textile materials for lightweight constructions technologies, methods, materials, properties

CERN Document Server

2016-01-01

In this book, experts on textile technologies convey both general and specific informa­tion on various aspects of textile engineering, ready-made technologies, and textile chemistry. They describe the entire process chain from fiber materials to various yarn constructions, 2D and 3D textile constructions, preforms, and interface layer design. In addition, the authors introduce testing methods, shaping and simulation techniques for the characterization of and structural mechanics calculations on anisotropic, pliable high-performance textiles, including specific examples from the fields of fiber plastic composites, textile concrete, and textile membranes. Readers will also be familiarized with the potential offered by increasingly popular textile structures, for instance in the fields of composite technology, construction technology, security technology, and membrane technology. Textile materials and semi-finished products have widely varied potential characteristics, and are commonly used as essential element...

Protection and control of nuclear materials

International Nuclear Information System (INIS)

Jalouneix, J.; Winter, D.

2007-01-01

In the framework of the French regulation on nuclear materials possession, the first liability is the one of operators who have to know at any time the quantity, quality and localization of any nuclear material in their possession. This requires an organization of the follow up and of the inventory of these materials together with an efficient protection against theft or sabotage. The French organization foresees a control of the implementation of this regulation at nuclear facilities and during the transport of nuclear materials by the minister of industry with the sustain of the institute of radiation protection and nuclear safety (IRSN). This article presents this organization: 1 - protection against malevolence; 2 - national protection and control of nuclear materials: goals, administrative organization, legal and regulatory content (authorization, control, sanctions), nuclear materials protection inside facilities (physical protection, follow up and inventory, security studies), protection of nuclear material transports (physical protection, follow up), control of nuclear materials (inspection at facilities, control of nuclear material measurements, inspection of nuclear materials during transport); 3 - international commitments of France: non-proliferation treaty, EURATOM regulation, international convention on the physical protection of nuclear materials, enforcement in France. (J.S.)

Operational and materials aspects of aging management

International Nuclear Information System (INIS)

Muscara, J.; Vora, J.P.; Moyer, C.E.

2005-01-01

Understanding degradation phenomena and managing the detrimental effects of aging are important aspects of commercial nuclear power plant operations. Potential for materials degradation should be considered early in the design and development stages; during manufacturing, construction, and installation; and during all aspects of plant operation and maintenance. This would lead to increased reliability during plant operations, and would reduce the need for mitigating actions and unplanned maintenance. Thus, it is necessary to instill a culture at the technical, administrative, and management levels that continually asks, 'What happens with time?' The answer to this question is central to the continuous safe and economical operation of nuclear power plants. Based on the past 25 years of aging-related research at the U.S. Nuclear Regulatory Commission (NRC), the authors present an overview of the key elements of understanding and managing aging, and how they should be integrated for safe and economical power plant operation. The focus of this paper is hardware-oriented engineering and aging of materials. The paper discusses previous and ongoing NRC research studies on non-destructive examination and materials degradation that can be applied for proactive management of materials degradation and aging during plant operations. (author)

Dear Author,

African Journals Online (AJOL)

pepsi

2013-05-22

May 22, 2013 ... vitro micropropagation technique is widely used in orna- mental crops. ... MATERIALS AND METHODS. Plant material and cultural ... NAA and TDZ in each experiment were considered as treatments; each treatment was ... analysis of variance (ANOVA) using the SAS software (SAS 1990). If treatments were ...

The Report on Activities of the Nuclear Regulatory Authority of the Slovak Republic. Annual Report 2012

International Nuclear Information System (INIS)

2013-04-01

A brief account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic (UJD SR) in 2012 is presented. These activities are reported under the headings: Foreword; (1) Legislative activities; (2) Regulatory Activities; (3) Nuclear safety of nuclear power plants; (4) Stress tests on the nuclear power plants; (5) Nuclear Materials in SR; (6) Building Authority; (7) Emergency planning and preparedness; (8) International activities; (9) Public communication; (10) Nuclear Regulatory Authority of the Slovak Republic; (11) Attachments; (12) Abbreviations used.

Naturally Occurring Radioactive Materials (NORM)

International Nuclear Information System (INIS)

Gray, P.

1997-01-01

This paper discusses the broad problems presented by Naturally Occuring Radioactive Materials (NORM). Technologically Enhanced naturally occuring radioactive material includes any radionuclides whose physical, chemical, radiological properties or radionuclide concentration have been altered from their natural state. With regard to NORM in particular, radioactive contamination is radioactive material in an undesired location. This is a concern in a range of industries: petroleum; uranium mining; phosphorus and phosphates; fertilizers; fossil fuels; forestry products; water treatment; metal mining and processing; geothermal energy. The author discusses in more detail the problem in the petroleum industry, including the isotopes of concern, the hazards they present, the contamination which they cause, ways to dispose of contaminated materials, and regulatory issues. He points out there are three key programs to reduce legal exposure and problems due to these contaminants: waste minimization; NORM assesment (surveys); NORM compliance (training)

Nordic project food contact materials

DEFF Research Database (Denmark)

Li, Ågot; Tesdal Håland, Julie; Petersen, Jens Højslev

Denmark, Finland, Faroe Islands, Iceland, Norway and Sweden have in 2013––2015 conducted a Nordic project on food contact materials. Food contact materials are used in all stages of food production and can be a general source of contamination. The food safety authorities in most of the Nordic...... countries have had a limited focus on the FCM area with the exception of Denmark and Finland. The aim of the project was therefore to control establishments producing, importing or using plastic food contact materials as well as to increase the knowledge of the inspectors performing these controls....... The focus of the inspections was to control the declaration of compliance (DoC) for plastic food contact materials. The requirement for a Doc is mandatory in order to ensure that the FCM complies with the legislation. In addition some products were analyzed for phthalates....

Naturally Occurring Radioactive Materials (NORM)

Energy Technology Data Exchange (ETDEWEB)

Gray, P. [ed.

1997-02-01

This paper discusses the broad problems presented by Naturally Occuring Radioactive Materials (NORM). Technologically Enhanced naturally occuring radioactive material includes any radionuclides whose physical, chemical, radiological properties or radionuclide concentration have been altered from their natural state. With regard to NORM in particular, radioactive contamination is radioactive material in an undesired location. This is a concern in a range of industries: petroleum; uranium mining; phosphorus and phosphates; fertilizers; fossil fuels; forestry products; water treatment; metal mining and processing; geothermal energy. The author discusses in more detail the problem in the petroleum industry, including the isotopes of concern, the hazards they present, the contamination which they cause, ways to dispose of contaminated materials, and regulatory issues. He points out there are three key programs to reduce legal exposure and problems due to these contaminants: waste minimization; NORM assesment (surveys); NORM compliance (training).

Licenses for possessing and applying radioactive sources, materials, etc

International Nuclear Information System (INIS)

Anon.

1977-01-01

Commercial and governmental institutions have been licensed by Dutch authorities to possess and apply radioactive sources, materials, etc. A summary is given and the list is subdivided into a number of sections such as radioactive sources, radioactive materials, X-ray equipment and technetium-generators

Safety of radiation sources and the security of radioactive materials in Saudi Arabia

International Nuclear Information System (INIS)

Alarfaj, A.M.

1998-01-01

The present status of the safety of radiation sources and the security of radioactive materials in Saudi Arabia is reviewed in details. Hazards and potential threat, material control and responsible parties, in addition to management and the technical requirements, are the main topics that are discussed. Some interest is given to the responsibilities of the regulatory authority, with special emphasis on the role of King Abdulaziz city for Science and Technology as a national competent authority. (author)

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Singh, J. Vol 3, No 2 (2011) - Articles Plane waves in a rotating generalized thermo-elastic solid with voids. Abstract PDF. ISSN: 2141-2839. AJOL African Journals Online. HOW TO USE AJOL.

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Vol 12 (2008) - Articles On the wave equations of shallow water with rough bottom topography. Abstract · Vol 14 (2009) - Articles Energy generation in a plant due to variable sunlight intensity

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Vol 45 (2016) - Articles From vectors to waves and streams: An alternative approach to semantic maps1. Abstract PDF · Vol 48 (2017) - Articles Introduction: 'n Klein ietsie for Johan Oosthuizen

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... to blast loadings. Abstract PDF · Vol 9, No 3S (2017): Special Issue - Articles Experimental and numerical investigation on blast wave propagation in soil structure. Abstract PDF. ISSN: 1112-9867.

Standard reference materials analysis for MINT Radiocarbon Laboratory

International Nuclear Information System (INIS)

Noraishah Othman; Kamisah Alias; Nasasni Nasrul

2004-01-01

As a follow-up to the setting up of the MINT Radiocarbon Dating facility. an exercise on the IAEA standard reference materials was carried out. Radiocarbon laboratories frequently used these 8 natural samples to verify their systems. The materials were either pretreated or analysed directly to determine the activity of 14 C isotopes of the five samples expressed in % Modern (pMC) terms and to make recommendations on further use of these materials. We present the results of the five materials and discuss the analyses that were undertaken. (Author)

Development of silicone rubber-type neutron shielding material

International Nuclear Information System (INIS)

Do, Jae Bum; Cho, Soo Hang; Kim, Ik Soo; Oh, Seung Chul; Hong, Soon Seok; Noh, Sung Ki; Jeong, Duk Yeon.

1997-06-01

Because the exposure to radiation in the nuclear facilities can be fatal to human, it is important to reduce the radiation dose level to a tolerable level. The purpose of this study is to develop highly effective neutron shielding materials for the shipping and storage cask of radioactive materials or in the nuclear/radiation facilities. On this study, we developed silicone rubber based neutron shielding materials and their various material properties, including neutron shielding ability, fire resistance, combustion characteristics, radiation resistance, thermal and mechanical properties were evaluated experimentally. (author). 16 tabs., 17 figs., 25 refs

WEBnm@: a web application for normal mode analyses of proteins