Discover city's master of science posters mark centenary of the physics genius who foretold future

CERN Multimedia

Quinn, J

2002-01-01

The Institute of Physics is marking the centenary of the birth of Paul Dirac, a Bristol physicist, with six Japanese cartoon-style posters. The posters will be on display at Bristol University today - which has been dubbed Dirac Day - to coincide with an afternoon of talks about the physicist (1/2 page).

Interconnected ponds operation for flood hazard distribution

Science.gov (United States)

Putra, S. S.; Ridwan, B. W.

2016-05-01

The climatic anomaly, which comes with extreme rainfall, will increase the flood hazard in an area within a short period of time. The river capacity in discharging the flood is not continuous along the river stretch and sensitive to the flood peak. This paper contains the alternatives on how to locate the flood retention pond that are physically feasible to reduce the flood peak. The flood ponds were designed based on flood curve number criteria (TR-55, USDA) with the aim of rapid flood peak capturing and gradual flood retuning back to the river. As a case study, the hydrologic condition of upper Ciliwung river basin with several presumed flood pond locations was conceptually designed. A fundamental tank model that reproducing the operation of interconnected ponds was elaborated to achieve the designed flood discharge that will flows to the downstream area. The flood hazard distribution status, as the model performance criteria, will be computed within Ciliwung river reach in Manggarai Sluice Gate spot. The predicted hazard reduction with the operation of the interconnected retention area result had been bench marked with the normal flow condition.

Spatial Modelling of Urban Physical Vulnerability to Explosion Hazards Using GIS and Fuzzy MCDA

Directory of Open Access Journals (Sweden)

Yasser Ebrahimian Ghajari

2017-07-01

Full Text Available Most of the world’s population is concentrated in accumulated spaces in the form of cities, making the concept of urban planning a significant issue for consideration by decision makers. Urban vulnerability is a major issue which arises in urban management, and is simply defined as how vulnerable various structures in a city are to different hazards. Reducing urban vulnerability and enhancing resilience are considered to be essential steps towards achieving urban sustainability. To date, a vast body of literature has focused on investigating urban systems’ vulnerabilities with regard to natural hazards. However, less attention has been paid to vulnerabilities resulting from man-made hazards. This study proposes to investigate the physical vulnerability of buildings in District 6 of Tehran, Iran, with respect to intentional explosion hazards. A total of 14 vulnerability criteria are identified according to the opinions of various experts, and standard maps for each of these criteria have been generated in a GIS environment. Ultimately, an ordered weighted averaging (OWA technique was applied to generate vulnerability maps for different risk conditions. The results of the present study indicate that only about 25 percent of buildings in the study area have a low level of vulnerability under moderate risk conditions. Sensitivity analysis further illustrates the robustness of the results obtained. Finally, the paper concludes by arguing that local authorities must focus more on risk-reduction techniques in order to reduce physical vulnerability and achieve urban sustainability.

49 CFR 171.3 - Hazardous waste.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Hazardous waste. 171.3 Section 171.3... waste. (a) No person may offer for transportation or transport a hazardous waste (as defined in § 171.8... waste for which a manifest is required unless that person: (1) Has marked each motor vehicle used to...

A database of volcanic hazards and their physical impacts to critical infrastructure

Science.gov (United States)

Wilson, Grant; Wilson, Thomas; Deligne, Natalia

2013-04-01

Approximately 10% of the world's population lives within 100 km of historically active volcanoes. Consequently, considerable critical infrastructure is at risk of being affected by volcanic eruptions, where critical infrastructure includes: electricity and wastewater networks; water supply systems; transport routes; communications; and buildings. Appropriate risk management strategies are required to minimise the risk to infrastructure, which necessitates detailed understanding of both volcanic hazards and infrastructure parameters and vulnerabilities. To address this, we are developing a database of the physical impacts and vulnerability of critical infrastructure observed during/following historic eruptions, placed in the context of event-specific volcanic hazard and infrastructure parameters. Our database considers: volcanic hazard parameters for each case study eruption (tephra thickness, dynamic pressure of PDCs, etc.); inventory of infrastructure elements present within the study area (geographical extent, age, etc.); the type and number of impacts and disruption caused to particular infrastructure sectors; and the quantified assessment of the vulnerability of built environments. Data have been compiled from a wide range of literature, focussing in particular on impact assessment studies which document in detail the damage sustained by critical infrastructure during a given eruption. We are creating a new vulnerability ranking to quantify the vulnerability of built environments affected by volcanic eruptions. The ranking is based upon a range of physical impacts and service disruption criteria, and is assigned to each case study. This ranking will permit comparison of vulnerabilities between case studies as well as indicate expected vulnerability during future eruptions. We are also developing hazard intensity thresholds indicating when specific damage states are expected for different critical infrastructure sectors. Finally, we have developed a data quality

International School and Workshop on Nonlinear Mathematical Physics and Natural Hazards

CERN Document Server

Kouteva-Guentcheva, Mihaela

2015-01-01

This book is devoted to current advances in the field of nonlinear mathematical physics and modeling of critical phenomena that can lead to catastrophic events. Pursuing a multidisciplinary approach, it gathers the work of scientists who are developing mathematical and computational methods for the study and analysis of nonlinear phenomena and who are working actively to apply these tools and create conditions to mitigate and reduce the negative consequences of natural and socio-economic disaster risk. This book summarizes the contributions of the International School and Workshop on Nonlinear Mathematical Physics and Natural Hazards, organized within the framework of the South East Europe Network in Mathematical and Theoretical Physics (SEENET MTP) and supported by UNESCO. It was held at the Bulgarian Academy of Sciences from November 28 to December 2, 2013. The contributions are divided into two major parts in keeping with the scientific program of the meeting. Among the topics covered in Part I (Nonlinear...

77 FR 70895 - New Marking Standards for Parcels Containing Hazardous Materials

Science.gov (United States)

2012-11-28

... dimension of each side must be 100 mm (3.94 inches), unless the package size requires a reduced size marking... third and fourth sentences of 10.12.2 as follows:] * * * Flammable gases in Division 2.1 are prohibited...

Influence of the Type of Marking and the Number of Players on Physiological and Physical Demands During Sided Games in Soccer

Directory of Open Access Journals (Sweden)

Casamichana David

2015-09-01

Full Text Available The aim of this research was to examine the influence of two variables, the type of marking (with or without man-marking and the number of players per team (3, 6, or 9 on the physical and physiological demands of sided games in soccer. Eighteen amateur players were monitored with GPS and heart rate devices. The following variables were analyzed: a maximum heart rate, a mean heart rate, time spent in each intensity range, total distance covered and distance covered in different speed ranges, a player load, maximum speed reached, and a work:rest ratio. The results showed that the type of marking influenced the physical demands of players, with greater total distance, a player load and a work:rest ratio when man-marking was used in the 3 vs. 3 (737 m, 95 Arbitrary Units (AU and 3.4 AU, respectively and 6 vs. 6 (783 m, 95 AU and 5.3 AU, respectively games (p<0.05. The number of players also had an effect on physiological intensity, with more time being spent at the <80%HRmax during the 9 vs. 9 and 6 vs. 6 games (more than 30% compared with the 3 vs. 3 format (less than 15% (p<0.05. These findings could help coaches to understand how the modification of different variables in sided games influences the physical and physiological demands of players.

Efficient pan-European river flood hazard modelling through a combination of statistical and physical models

NARCIS (Netherlands)

Paprotny, D.; Morales Napoles, O.; Jonkman, S.N.

2017-01-01

Flood hazard is currently being researched on continental and global scales, using models of increasing complexity. In this paper we investigate a different, simplified approach, which combines statistical and physical models in place of conventional rainfall-run-off models to carry out flood

Elevation uncertainty in coastal inundation hazard assessments

Science.gov (United States)

Gesch, Dean B.; Cheval, Sorin

2012-01-01

Coastal inundation has been identified as an important natural hazard that affects densely populated and built-up areas (Subcommittee on Disaster Reduction, 2008). Inundation, or coastal flooding, can result from various physical processes, including storm surges, tsunamis, intense precipitation events, and extreme high tides. Such events cause quickly rising water levels. When rapidly rising water levels overwhelm flood defenses, especially in heavily populated areas, the potential of the hazard is realized and a natural disaster results. Two noteworthy recent examples of such natural disasters resulting from coastal inundation are the Hurricane Katrina storm surge in 2005 along the Gulf of Mexico coast in the United States, and the tsunami in northern Japan in 2011. Longer term, slowly varying processes such as land subsidence (Committee on Floodplain Mapping Technologies, 2007) and sea-level rise also can result in coastal inundation, although such conditions do not have the rapid water level rise associated with other flooding events. Geospatial data are a critical resource for conducting assessments of the potential impacts of coastal inundation, and geospatial representations of the topography in the form of elevation measurements are a primary source of information for identifying the natural and human components of the landscape that are at risk. Recently, the quantity and quality of elevation data available for the coastal zone have increased markedly, and this availability facilitates more detailed and comprehensive hazard impact assessments.

Near-Earth space hazards and their detection (Scientific session of the Physical Sciences Division of the Russian Academy of Sciences, 27 March 2013)

Science.gov (United States)

2013-08-01

A scientific session of the Physical Sciences Division of the Russian Academy of Sciences (RAS), titled "Near-Earth space hazards and their detection", was held on 27 March 2013 at the conference hall of the Lebedev Physical Institute, RAS. The agenda posted on the website of the Physical Sciences Division, RAS, http://www.gpad.ac.ru, included the following reports: (1) Emel'yanenko V V, Shustov B M (Institute of Astronomy, RAS, Moscow) "The Chelyabinsk event and the asteroid-comet hazard"; (2) Chugai N N (Institute of Astronomy, RAS, Moscow) "A physical model of the Chelyabinsk event"; (3) Lipunov V M (Lomonosov Moscow State University, Sternberg Astronomical Institute, Moscow) "MASTER global network of optical monitoring"; (4) Beskin G M (Special Astrophysical Observatory, RAS, Arkhyz, Karachai-Cirkassian Republic) "Wide-field optical monitoring systems with subsecond time resolution for the detection and study of cosmic threats". The expanded papers written on the base of oral reports 1 and 4 are given below. • The Chelyabinsk event and the asteroid-comet hazard, V V Emel'yanenko, B M Shustov Physics-Uspekhi, 2013, Volume 56, Number 8, Pages 833-836 • Wide-field subsecond temporal resolution optical monitoring systems for the detection and study of cosmic hazards, G M Beskin, S V Karpov, V L Plokhotnichenko, S F Bondar, A V Perkov, E A Ivanov, E V Katkova, V V Sasyuk, A Shearer Physics-Uspekhi, 2013, Volume 56, Number 8, Pages 836-842

Handbook of hazardous waste management

International Nuclear Information System (INIS)

Metry, A.A.

1980-01-01

The contents of this work are arranged so as to give the reader a detailed understanding of the elements of hazardous waste management. Generalized management concepts are covered in Chapters 1 through 5 which are entitled: Introduction, Regulations Affecting Hazardous Waste Management, Comprehensive Hazardous Waste Management, Control of Hazardous Waste Transportation, and Emergency Hazardous Waste Management. Chapters 6 through 11 deal with treatment concepts and are entitled: General Considerations for Hazardous Waste Management Facilities, Physical Treatment of Hazardous Wastes, Chemical Treatment of Hazardous Wastes, Biological Treatment of Hazardous Wastes, Incineration of Hazardous Wastes, and Hazardous Waste Management of Selected Industries. Chapters 12 through 15 are devoted to ultimate disposal concepts and are entitled: Land Disposal Facilities, Ocean Dumping of Hazardous Wastes, Disposal of Extremely Hazardous Wastes, and Generalized Criteria for Hazardous Waste Management Facilities

Security and health protection during the transport of hazardous substances

International Nuclear Information System (INIS)

Benkovic, Z.; Bobic, V.

2009-01-01

The introduction of this work describes the legal regulations which regulate the conditions and method of the transport of hazardous substances, necessary documentation for storage, forwarding and transport. Hazardous substances are defined and classified according to the ADR. The necessary security measures which are taken for the transport of particular types of hazardous substances are mentioned. Marking and labeling of vehicles for the transport of hazardous substances (plates and lists of hazards), packing and marking of packaging is important. The safety measures which are taken at the filling stations of combustible liquids as well as places specially organized for filling, prohibitions and limitations and necessary transport documentation are mentioned. It is visible from the above mentioned that the activity of the whole security chain is necessary and depends on the good knowledge of basic characteristics and features of substances. All the participants in the security chain have to be familiar with and consistently obey the legal regulations. The manufacturer must know the features of the hazardous substance, supervisory services must be acquainted with the threat and potential danger. The hauler and intervention forces must, in case of accidents and damage, be familiar with the emergency procedures in case of accidents and act properly regarding the threatening dangerous substance.(author)

The Five Marks of the Mental

Science.gov (United States)

Pernu, Tuomas K.

2017-01-01

The mental realm seems different to the physical realm; the mental is thought to be dependent on, yet distinct from the physical. But how, exactly, are the two realms supposed to be different, and what, exactly, creates the seemingly insurmountable juxtaposition between the mental and the physical? This review identifies and discusses five marks of the mental, features that set characteristically mental phenomena apart from the characteristically physical phenomena. These five marks (intentionality, consciousness, free will, teleology, and normativity) are not presented as a set of features that define mentality. Rather, each of them is something we seem to associate with phenomena we consider mental, and each of them seems to be in tension with the physical view of reality in its own particular way. It is thus suggested how there is no single mind-body problem, but a set of distinct but interconnected problems. Each of these separate problems is analyzed, and their differences, similarities and connections are identified. This provides a useful basis for future theoretical work on psychology and philosophy of mind, that until now has too often suffered from unclarities, inadequacies, and conflations. PMID:28736537

Occupational Health Hazards in ICU Nursing Staff

Directory of Open Access Journals (Sweden)

Helena Eri Shimizu

2010-01-01

Full Text Available This study analyzed occupational health hazards for Intensive Care Unit (ICU nurses and nursing technicians, comparing differences in the number and types of hazards which occur at the beginning and end of their careers. A descriptive cross-sectional study was carried out with 26 nurses and 96 nursing technicians from a public hospital in the Federal District, Brazil. A Likert-type work-related symptom scale (WRSS was used to evaluate the presence of physical, psychological, and social risks. Data were analyzed with the use of the SPSS, version 12.0, and the Kruskal-Wallis test for statistical significance and differences in occupational health hazards at the beginning and at the end of the workers' careers. As a workplace, ICUs can cause work health hazards, mostly physical, to nurses and nursing technicians due to the frequent use of physical energy and strength to provide care, while psychological and social hazards occur to a lesser degree.

Hazard interactions and interaction networks (cascades) within multi-hazard methodologies

Science.gov (United States)

Gill, Joel C.; Malamud, Bruce D.

2016-08-01

This paper combines research and commentary to reinforce the importance of integrating hazard interactions and interaction networks (cascades) into multi-hazard methodologies. We present a synthesis of the differences between multi-layer single-hazard approaches and multi-hazard approaches that integrate such interactions. This synthesis suggests that ignoring interactions between important environmental and anthropogenic processes could distort management priorities, increase vulnerability to other spatially relevant hazards or underestimate disaster risk. In this paper we proceed to present an enhanced multi-hazard framework through the following steps: (i) description and definition of three groups (natural hazards, anthropogenic processes and technological hazards/disasters) as relevant components of a multi-hazard environment, (ii) outlining of three types of interaction relationship (triggering, increased probability, and catalysis/impedance), and (iii) assessment of the importance of networks of interactions (cascades) through case study examples (based on the literature, field observations and semi-structured interviews). We further propose two visualisation frameworks to represent these networks of interactions: hazard interaction matrices and hazard/process flow diagrams. Our approach reinforces the importance of integrating interactions between different aspects of the Earth system, together with human activity, into enhanced multi-hazard methodologies. Multi-hazard approaches support the holistic assessment of hazard potential and consequently disaster risk. We conclude by describing three ways by which understanding networks of interactions contributes to the theoretical and practical understanding of hazards, disaster risk reduction and Earth system management. Understanding interactions and interaction networks helps us to better (i) model the observed reality of disaster events, (ii) constrain potential changes in physical and social vulnerability

Princeton Plasma Physics Laboratory (PPPL) seismic hazard analysis

International Nuclear Information System (INIS)

Savy, J.

1989-01-01

New design and evaluation guidelines for department of energy facilities subjected to natural phenomena hazard, are being finalized. Although still in draft form at this time, the document describing those guidelines should be considered to be an update of previously available guidelines. The recommendations in the guidelines document mentioned above, and simply referred to as the ''guidelines'' thereafter, are based on the best information at the time of its development. In particular, the seismic hazard model for the Princeton site was based on a study performed in 1981 for Lawrence Livermore National Laboratory (LLNL), which relied heavily on the results of the NRC's Systematic Evaluation Program and was based on a methodology and data sets developed in 1977 and 1978. Considerable advances have been made in the last ten years in the domain of seismic hazard modeling. Thus, it is recommended to update the estimate of the seismic hazard at the DOE sites whenever possible. The major differences between previous estimates and the ones proposed in this study for the PPPL are in the modeling of the strong ground motion at the site, and the treatment of the total uncertainty in the estimates to include knowledge uncertainty, random uncertainty, and expert opinion diversity as well. 28 refs

Princeton Plasma Physics Laboratory (PPPL) seismic hazard analysis

Energy Technology Data Exchange (ETDEWEB)

Savy, J.

1989-10-01

New design and evaluation guidelines for department of energy facilities subjected to natural phenomena hazard, are being finalized. Although still in draft form at this time, the document describing those guidelines should be considered to be an update of previously available guidelines. The recommendations in the guidelines document mentioned above, and simply referred to as the guidelines'' thereafter, are based on the best information at the time of its development. In particular, the seismic hazard model for the Princeton site was based on a study performed in 1981 for Lawrence Livermore National Laboratory (LLNL), which relied heavily on the results of the NRC's Systematic Evaluation Program and was based on a methodology and data sets developed in 1977 and 1978. Considerable advances have been made in the last ten years in the domain of seismic hazard modeling. Thus, it is recommended to update the estimate of the seismic hazard at the DOE sites whenever possible. The major differences between previous estimates and the ones proposed in this study for the PPPL are in the modeling of the strong ground motion at the site, and the treatment of the total uncertainty in the estimates to include knowledge uncertainty, random uncertainty, and expert opinion diversity as well. 28 refs.

Radon and its hazards

International Nuclear Information System (INIS)

Chang Guilan

2002-01-01

The author describes basic physical and chemical properties of radon and the emanation, introduces methods of radon measurement, expounds the hazards of non-mine radon accumulation to the health of human being and the protection, as well as the history how the human being recognizes the hazards of radon through the specific data and examples, and finally proposes protecting measures to avoid the hazards of radon to the health of human being, and to do ecologic evaluation of environments

NotaMark industrial laser marking system: a new security marking technology

Science.gov (United States)

Moreau, Vincent G.

2004-06-01

Up until now, the only variable alphanumeric data which could be added to banknotes was the number, applied by means of impact typographical numbering boxes. As an additional process or an alternative to this mechanical method, a non-contact laser marking process can be used offering high quality and greater levels of flexibility. For this purpose KBA-GIORI propose an exclusive laser marking solution called NotaMark. The laser marking process NotaMark is the ideal solution for applying variable data and personalizing banknotes (or any other security documents) with a very high resolution, for extremely large production volumes. A completely integrated solution has been developed comprised of laser light sources, marking head units, and covers and extraction systems. NotaMark allows the marking of variable data by removing locally and selectively, specific printed materials leaving the substrate itself untouched. A wide range of materials has already been tested extensively. NotaMark is a new security feature which is easy to identify and difficult to counterfeit, and which complies with the standard mechanical and chemical resistance tests in the security printing industry as well as with other major soiling tests. The laser marking process opens up a whole new range of design possibilities and can be used to create a primary security feature such as numbering, or to enhance the value of existing features.

Rockfall hazard assessment integrating probabilistic physically based rockfall source detection (Norddal municipality, Norway).

Science.gov (United States)

Yugsi Molina, F. X.; Oppikofer, T.; Fischer, L.; Hermanns, R. L.; Taurisano, A.

2012-04-01

Traditional techniques to assess rockfall hazard are partially based on probabilistic analysis. Stochastic methods has been used for run-out analysis of rock blocks to estimate the trajectories that a detached block will follow during its fall until it stops due to kinetic energy loss. However, the selection of rockfall source areas is usually defined either by multivariate analysis or by field observations. For either case, a physically based approach is not used for the source area detection. We present an example of rockfall hazard assessment that integrates a probabilistic rockfall run-out analysis with a stochastic assessment of the rockfall source areas using kinematic stability analysis in a GIS environment. The method has been tested for a steep more than 200 m high rock wall, located in the municipality of Norddal (Møre og Romsdal county, Norway), where a large number of people are either exposed to snow avalanches, rockfalls, or debris flows. The area was selected following the recently published hazard mapping plan of Norway. The cliff is formed by medium to coarse-grained quartz-dioritic to granitic gneisses of Proterozoic age. Scree deposits product of recent rockfall activity are found at the bottom of the rock wall. Large blocks can be found several tens of meters away from the cliff in Sylte, the main locality in the Norddal municipality. Structural characterization of the rock wall was done using terrestrial laser scanning (TLS) point clouds in the software Coltop3D (www.terranum.ch), and results were validated with field data. Orientation data sets from the structural characterization were analyzed separately to assess best-fit probability density functions (PDF) for both dip angle and dip direction angle of each discontinuity set. A GIS-based stochastic kinematic analysis was then carried out using the discontinuity set orientations and the friction angle as random variables. An airborne laser scanning digital elevation model (ALS-DEM) with 1 m

33 CFR 150.628 - How must the operator label, tag, and mark a container of hazardous material?

Science.gov (United States)

2010-07-01

... Workplace Safety and Health Hazard Communication Program § 150.628 How must the operator label, tag, and..., reactive and other special condition hazard warnings. The only exception is for portable containers that...

High contrast laser marking of alumina

Science.gov (United States)

Penide, J.; Quintero, F.; Riveiro, A.; Fernández, A.; del Val, J.; Comesaña, R.; Lusquiños, F.; Pou, J.

2015-05-01

Alumina serves as raw material for a broad range of advanced ceramic products. These elements should usually be identified by some characters or symbols printed directly on them. In this sense, laser marking is an efficient, reliable and widely implemented process in industry. However, laser marking of alumina still leads to poor results since the process is not able to produce a dark mark, yielding bad contrast. In this paper, we present an experimental study on the process of marking alumina by three different lasers working in two wavelengths: 1064 nm (Near-infrared) and 532 nm (visible, green radiation). A colorimetric analysis has been carried out in order to compare the resulting marks and its contrast. The most suitable laser operating conditions were also defined and are reported here. Moreover, the physical process of marking by NIR lasers is discussed in detail. Field Emission Scanning Electron Microscopy, High Resolution Transmission Electron Microscopy and X-ray Photoelectron Spectroscopy were also employed to analyze the results. Finally, we propose an explanation for the differences of the coloration induced under different atmospheres and laser parameters. We concluded that the atmosphere is the key parameter, being the inert one the best choice to produce the darkest marks.

Controlling organic chemical hazards in food manufacturing: a hazard analysis critical control points (HACCP) approach.

Science.gov (United States)

Ropkins, K; Beck, A J

2002-08-01

Hazard analysis by critical control points (HACCP) is a systematic approach to the identification, assessment and control of hazards. Effective HACCP requires the consideration of all hazards, i.e., chemical, microbiological and physical. However, to-date most 'in-place' HACCP procedures have tended to focus on the control of microbiological and physical food hazards. In general, the chemical component of HACCP procedures is either ignored or limited to applied chemicals, e.g., food additives and pesticides. In this paper we discuss the application of HACCP to a broader range of chemical hazards, using organic chemical contaminants as examples, and the problems that are likely to arise in the food manufacturing sector. Chemical HACCP procedures are likely to result in many of the advantages previously identified for microbiological HACCP procedures: more effective, efficient and economical than conventional end-point-testing methods. However, the high costs of analytical monitoring of chemical contaminants and a limited understanding of formulation and process optimisation as means of controlling chemical contamination of foods are likely to prevent chemical HACCP becoming as effective as microbiological HACCP.

Near-Earth space hazards and their detection (Scientific session of the Physical Sciences Division of the Russian Academy of Sciences, 27 March 2013)

International Nuclear Information System (INIS)

2013-01-01

A scientific session of the Physical Sciences Division of the Russian Academy of Sciences (RAS), titled N ear-Earth space hazards and their detection , was held on 27 March 2013 at the conference hall of the Lebedev Physical Institute, RAS. The agenda posted on the website of the Physical Sciences Division, RAS, http://www.gpad.ac.ru, included the following reports: (1) Emel'yanenko V V, Shustov B M (Institute of Astronomy, RAS, Moscow) T he Chelyabinsk event and the asteroid-comet hazard ; (2) Chugai N N (Institute of Astronomy, RAS, Moscow) A physical model of the Chelyabinsk event ; (3) Lipunov V M (Lomonosov Moscow State University, Sternberg Astronomical Institute, Moscow) M ASTER global network of optical monitoring ; (4) Beskin G M (Special Astrophysical Observatory, RAS, Arkhyz, Karachai-Cirkassian Republic) W ide-field optical monitoring systems with subsecond time resolution for the detection and study of cosmic threats . The expanded papers written on the base of oral reports 1 and 4 are given below. • The Chelyabinsk event and the asteroid-comet hazard, V V Emel'yanenko, B M Shustov Physics-Uspekhi, 2013, Volume 56, Number 8, Pages 833–836 • Wide-field subsecond temporal resolution optical monitoring systems for the detection and study of cosmic hazards, G M Beskin, S V Karpov, V L Plokhotnichenko, S F Bondar, A V Perkov, E A Ivanov, E V Katkova, V V Sasyuk, A Shearer Physics-Uspekhi, 2013, Volume 56, Number 8, Pages 836–842 (conferences and symposia)

High contrast laser marking of alumina

International Nuclear Information System (INIS)

Penide, J.; Quintero, F.; Riveiro, A.; Fernández, A.; Val, J. del; Comesaña, R.; Lusquiños, F.; Pou, J.

2015-01-01

Highlights: • Laser marking of alumina using near infrared (NIR) lasers was experimentally analyzed. • Color change produced by NIR lasers is due to thermally induced oxygen vacancies. • Laser marking results obtained using NIR lasers and green laser are compared. • High contrast marks on alumina were achieved. - Abstract: Alumina serves as raw material for a broad range of advanced ceramic products. These elements should usually be identified by some characters or symbols printed directly on them. In this sense, laser marking is an efficient, reliable and widely implemented process in industry. However, laser marking of alumina still leads to poor results since the process is not able to produce a dark mark, yielding bad contrast. In this paper, we present an experimental study on the process of marking alumina by three different lasers working in two wavelengths: 1064 nm (Near-infrared) and 532 nm (visible, green radiation). A colorimetric analysis has been carried out in order to compare the resulting marks and its contrast. The most suitable laser operating conditions were also defined and are reported here. Moreover, the physical process of marking by NIR lasers is discussed in detail. Field Emission Scanning Electron Microscopy, High Resolution Transmission Electron Microscopy and X-ray Photoelectron Spectroscopy were also employed to analyze the results. Finally, we propose an explanation for the differences of the coloration induced under different atmospheres and laser parameters. We concluded that the atmosphere is the key parameter, being the inert one the best choice to produce the darkest marks

Marked point process framework for living probabilistic safety assessment and risk follow-up

International Nuclear Information System (INIS)

Arjas, Elja; Holmberg, Jan

1995-01-01

We construct a model for living probabilistic safety assessment (PSA) by applying the general framework of marked point processes. The framework provides a theoretically rigorous approach for considering risk follow-up of posterior hazards. In risk follow-up, the hazard of core damage is evaluated synthetically at time points in the past, by using some observed events as logged history and combining it with re-evaluated potential hazards. There are several alternatives for doing this, of which we consider three here, calling them initiating event approach, hazard rate approach, and safety system approach. In addition, for a comparison, we consider a core damage hazard arising in risk monitoring. Each of these four definitions draws attention to a particular aspect in risk assessment, and this is reflected in the behaviour of the consequent risk importance measures. Several alternative measures are again considered. The concepts and definitions are illustrated by a numerical example

Hazards Control Department annual technology review, 1987

Energy Technology Data Exchange (ETDEWEB)

Griffith, R.V.; Anderson, K.J. (eds.)

1988-07-01

This document describes some of the research performed in the LLNL Hazards Control Department from October 1986 to September 1987. The sections in the Annual report cover scientific concerns in the areas of Health Physics, Industrial Hygiene, Industrial Safety, Aerosol Science, Resource Management, Dosimetry and Radiation Physics, Criticality Safety, and Fire Science. For a broader overview of the types of work performed in the Hazards Control Department, we have also compiled a selection of abstracts of recent publications by Hazards Control employees. Individual reports are processed separately for the data base.

Bench-marking beam-beam simulations using coherent quadrupole effects

International Nuclear Information System (INIS)

Krishnagopal, S.; Chin, Y.H.

1992-06-01

Computer simulations are used extensively in the study of the beam-beam interaction. The proliferation of such codes raises the important question of their reliability, and motivates the development of a dependable set of bench-marks. We argue that rather than detailed quantitative comparisons, the ability of different codes to predict the same qualitative physics should be used as a criterion for such bench-marks. We use the striking phenomenon of coherent quadrupole oscillations as one such bench-mark, and demonstrate that our codes do indeed observe this behaviour. We also suggest some other tests that could be used as bench-marks

Bench-marking beam-beam simulations using coherent quadrupole effects

International Nuclear Information System (INIS)

Krishnagopal, S.; Chin, Y.H.

1992-01-01

Computer simulations are used extensively in the study of the beam-beam interaction. The proliferation of such codes raises the important question of their reliability, and motivates the development of a dependable set of bench-marks. We argue that rather than detailed quantitative comparisons, the ability of different codes to predict the same qualitative physics should be used as a criterion for such bench-marks. We use the striking phenomenon of coherent quadrupole oscillations as one such bench-mark, and demonstrate that our codes do indeed observe this behavior. We also suggest some other tests that could be used as bench-marks

Hazardous factories: Nigerian evidence.

Science.gov (United States)

Oloyede, Olajide

2005-06-01

The past 15 years have seen an increasing governmental and corporate concern for the environment worldwide. For governments, information about the environmental performance of the industrial sector is required to inform macro-level decisions about environmental targets such as those required to meet UN directives. However, in many African, Asian, and Latin American countries, researching and reporting company environmental performance is limited. This article serves as a contribution to filling the gap by presenting evidence of physical and chemical risk in Nigerian factories. One hundred and three factories with a total of 5,021 workers were studied. One hundred and twenty physical and chemical hazards were identified and the result shows a high number of workers exposed to such hazards. The study also reveals that workers' awareness level of chemical hazards was high. Yet the danger was perceived in behavioral terms, especially by manufacturing firms, which tend to see environmental investment in an increasingly global economy as detrimental to profitability.

Hazardous situation in the MR bore: induction in ECG leads causes fire

International Nuclear Information System (INIS)

Kugel, Harald; Bremer, Christoph; Fischbach, Roman; Lenzen, Horst; Tombach, Bernd; Heindel, Walter; Pueschel, Marco; Aken, Hugo van

2003-01-01

There is a potential hazard during examinations of patients with attached or implanted long conductors, e.g. ECG leads: an MR exam of the lumbar spine of a patient was performed in a 1.5-T scanner under ECG monitoring using equipment marked as MR compatible. Standard cabling of 370-cm length was guided without loops from the electrodes through the caudal opening of the magnet bore. During a sagittal T1-weighted turbo-spin-echo scan suddenly a flame of approximately 3 cm arose from the patient's shirt, close to the position of the electrodes. The supervising anaesthesiologist extinguished the flames with his hands. A subsequent physical examination revealed second- to third-degree burns. The analysis of the incident revealed that high voltages can be induced in straight conductors without loops as ECG cables by coupling with the electric component of the HF field. Local heating or sparking can cause an open flame at the position of the electrodes. This danger exists even with ECG equipment that is specifically marked as MR compatible. (orig.)

Bite marks on skin and clay: A comparative analysis

Directory of Open Access Journals (Sweden)

R.K. Gorea

2014-12-01

Full Text Available Bite marks are always unique because teeth are distinctive. Bite marks are often observed at the crime scene in sexual and in physical assault cases on the skin of the victims and sometimes on edible leftovers in burglary cases. This piece of evidence is often ignored, but if properly harvested and investigated, bite marks may prove useful in apprehending and successfully prosecuting the criminals. Due to the importance of bite marks, we conducted a progressive randomised experimental study conducted on volunteers. A total of 188 bite marks on clay were studied. Based on these findings, 93.34% of the volunteers could be identified from the bite marks on the clay. In addition, 201 impressions on skin were studied, and out of these cases, 41.01% of the same volunteers could be identified based on the bite mark impressions on the skin.

[Evaluation of the lifetime of nail markings during polio vaccinations in Chad].

Science.gov (United States)

Quoc Cuong, Huong; Schlumberger, Martin; Garba Tchang, Salomon; Ould Cheikh, Dah; Savès, Marianne; Mallah, Barah; Demtilo Attilo, Jacques; Ngangro Mosurel, Ndeikoundam; Gamatié, Youssouf

2010-01-01

days, visually and by photographs, to determine the factors associated with the lifetime of the markings. Kaplan-Meier and log-rank methods were applied to estimate their survival curve and the variables significant for their lifetime; the Cox proportional hazard model was used to determine multivariable-adjusted hazard ratios. Of the 184 children surveyed through the end of the study, the markings disappeared after 35 days of follow-up for 35% of them. The average lifetime of markings on these children was 28 days (SD: 4.95) and was associated, according to the Cox model, with 3 variables: the quality of the marking (RR = 0.335, 95% CI: 0.182-0.617, p vaccination. These evaluations, which take place well before the disappearance of markings, help to determine the precise coverage of SID.

Meet EPA Chemist Mark Strynar, Ph.D.

Science.gov (United States)

Dr. Mark Strynar is a physical scientist in EPA's Office of Research and Development. His research interests include developing methods to measure and analyze the movement of PFCs and other xenobiotic compounds in biological and environmental media

Uncertainty on shallow landslide hazard assessment: from field data to hazard mapping

Science.gov (United States)

Trefolini, Emanuele; Tolo, Silvia; Patelli, Eduardo; Broggi, Matteo; Disperati, Leonardo; Le Tuan, Hai

2015-04-01

Shallow landsliding that involve Hillslope Deposits (HD), the surficial soil that cover the bedrock, is an important process of erosion, transport and deposition of sediment along hillslopes. Despite Shallow landslides generally mobilize relatively small volume of material, they represent the most hazardous factor in mountain regions due to their high velocity and the common absence of warning signs. Moreover, increasing urbanization and likely climate change make shallow landslides a source of widespread risk, therefore the interest of scientific community about this process grown in the last three decades. One of the main aims of research projects involved on this topic, is to perform robust shallow landslides hazard assessment for wide areas (regional assessment), in order to support sustainable spatial planning. Currently, three main methodologies may be implemented to assess regional shallow landslides hazard: expert evaluation, probabilistic (or data mining) methods and physical models based methods. The aim of this work is evaluate the uncertainty of shallow landslides hazard assessment based on physical models taking into account spatial variables such as: geotechnical and hydrogeologic parameters as well as hillslope morphometry. To achieve this goal a wide dataset of geotechnical properties (shear strength, permeability, depth and unit weight) of HD was gathered by integrating field survey, in situ and laboratory tests. This spatial database was collected from a study area of about 350 km2 including different bedrock lithotypes and geomorphological features. The uncertainty associated to each step of the hazard assessment process (e.g. field data collection, regionalization of site specific information and numerical modelling of hillslope stability) was carefully characterized. The most appropriate probability density function (PDF) was chosen for each numerical variable and we assessed the uncertainty propagation on HD strength parameters obtained by

Migration, environmental hazards, and health outcomes in China.

Science.gov (United States)

Chen, Juan; Chen, Shuo; Landry, Pierre F

2013-03-01

China's rapid economic growth has had a serious impact on the environment. Environmental hazards are major sources of health risk factors. The migration of over 200 million people to heavily polluted urban areas is likely to be significantly detrimental to health. Based on data from the 2009 national household survey "Chinese Attitudes toward Inequality and Distributive Injustice" (N = 2866) and various county-level and municipal indicators, we investigate the disparities in subjective exposure to environmental hazards and associated health outcomes in China. This study focuses particularly on migration-residency status and county-level socio-economic development. We employ multiple regressions that account for the complex multi-stage survey design to assess the associations between perceived environmental hazards and individual and county-level indicators and between perceived environmental hazards and health outcomes, controlling for physical and social environments at multiple levels. We find that perceived environmental hazards are associated with county-level industrialization and economic development: respondents living in more industrialized counties report greater exposure to environmental hazards. Rural-to-urban migrants are exposed to more water pollution and a higher measure of overall environmental hazard. Perceived environmental risk factors severely affect the physical and mental health of the respondents. The negative effects of perceived overall environmental hazard on physical health are more detrimental for rural-to-urban migrants than for urban residents. The research findings call for restructuring the household registration system in order to equalize access to public services and mitigate adverse environmental health effects, particularly among the migrant population. Copyright © 2012 Elsevier Ltd. All rights reserved.

Multi-Hazard Interactions in Guatemala

Science.gov (United States)

Gill, Joel; Malamud, Bruce D.

2017-04-01

In this paper, we combine physical and social science approaches to develop a multi-scale regional framework for natural hazard interactions in Guatemala. The identification and characterisation of natural hazard interactions is an important input for comprehensive multi-hazard approaches to disaster risk reduction at a regional level. We use five transdisciplinary evidence sources to organise and populate our framework: (i) internationally-accessible literature; (ii) civil protection bulletins; (iii) field observations; (iv) stakeholder interviews (hazard and civil protection professionals); and (v) stakeholder workshop results. These five evidence sources are synthesised to determine an appropriate natural hazard classification scheme for Guatemala (6 hazard groups, 19 hazard types, and 37 hazard sub-types). For a national spatial extent (Guatemala), we construct and populate a "21×21" hazard interaction matrix, identifying 49 possible interactions between 21 hazard types. For a sub-national spatial extent (Southern Highlands, Guatemala), we construct and populate a "33×33" hazard interaction matrix, identifying 112 possible interactions between 33 hazard sub-types. Evidence sources are also used to constrain anthropogenic processes that could trigger natural hazards in Guatemala, and characterise possible networks of natural hazard interactions (cascades). The outcomes of this approach are among the most comprehensive interaction frameworks for national and sub-national spatial scales in the published literature. These can be used to support disaster risk reduction and civil protection professionals in better understanding natural hazards and potential disasters at a regional scale.

Development of hazard analysis by critical control points (HACCP) procedures to control organic chemical hazards in the agricultural production of raw food commodities.

Science.gov (United States)

Ropkins, Karl; Ferguson, Andrew; Beck, Angus J

2003-01-01

Hazard Analysis by Critical Control Points (HACCP) is a systematic approach to the identification, assessment, and control of hazards in the food chain. Effective HACCP requires the consideration of all chemical microbiological, and physical hazards. However, current procedures focus primarily on microbiological and physical hazards, while chemical aspects of HACCP have received relatively little attention. In this article we discuss the application of HACCP to organic chemical contaminants and the problems that are likely to be encountered in agriculture. We also present generic templates for the development of organic chemical contaminant HACCP procedures for selected raw food commodities, that is, cereal crops,raw meats, and milk.

Occupational health hazards in mining: an overview

Energy Technology Data Exchange (ETDEWEB)

Donoghue, A.M. [Alcoa World Alumina Australia, Perth, WA (Australia)

2004-08-01

This review article outlines the physical, chemical, biological, ergonomic and psychosocial occupational health hazards of mining and associated metallurgical processes. Mining remains an important industrial sector in many parts of the world and although substantial progress has been made in the control of occupational health hazards, there remains room for further risk reduction. This applies particularly to traumatic injury hazards, ergonomic hazards and noise. Vigilance is also required to ensure exposures to coal dust and crystalline silica remain effectively controlled.

1992 Tier Two emergency and hazardous chemical inventory

International Nuclear Information System (INIS)

1993-03-01

This report is a compilation of data on emergency and hazardous chemicals stored at the Hanford Reservation. The report lists name or chemical description, physical and health hazards, inventories and storage location

Building 894 hazards assessment document

International Nuclear Information System (INIS)

Banda, Z.; Williams, M.

1996-07-01

The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with Building 894. The entire inventory was subjected to the screening criteria for potential airborne impact to onsite and offsite individuals out of which 9 chemicals were kept for further evaluation. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distance at which a postulated facility event will produce consequences exceeding the Early Severe Health Effects threshold is 130 meters. The highest emergency classification is a General Emergency. The Emergency Planning Zone is a nominal 130 meter area that conforms to DOE boundaries and physical/jurisdictional boundaries such as fence lines and streets

Building 6630 hazards assessment document

International Nuclear Information System (INIS)

Williams, M.; Banda, Z.

1996-10-01

The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with Building 6630. The entire inventory was subjected to the screening criteria for potential airborne impact to onsite and offsite individuals out of which one chemical was kept for further evaluation. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the chemical release site, the atmospheric conditions, and the circumstances of the release. The greatest distance at which a postulated facility event will produce consequences exceeding the Early Severe Health Effects threshold is 76 meters. The highest emergency classification is an Alert. The Emergency Planning Zone is a nominal 100 meter area that conforms to DOE boundaries and physical/jurisdictional boundaries such as fence lines and streets

Physically based probabilistic seismic hazard analysis using broadband ground motion simulation: a case study for the Prince Islands Fault, Marmara Sea

Science.gov (United States)

Mert, Aydin; Fahjan, Yasin M.; Hutchings, Lawrence J.; Pınar, Ali

2016-08-01

The main motivation for this study was the impending occurrence of a catastrophic earthquake along the Prince Island Fault (PIF) in the Marmara Sea and the disaster risk around the Marmara region, especially in Istanbul. This study provides the results of a physically based probabilistic seismic hazard analysis (PSHA) methodology, using broadband strong ground motion simulations, for sites within the Marmara region, Turkey, that may be vulnerable to possible large earthquakes throughout the PIF segments in the Marmara Sea. The methodology is called physically based because it depends on the physical processes of earthquake rupture and wave propagation to simulate earthquake ground motion time histories. We included the effects of all considerable-magnitude earthquakes. To generate the high-frequency (0.5-20 Hz) part of the broadband earthquake simulation, real, small-magnitude earthquakes recorded by a local seismic array were used as empirical Green's functions. For the frequencies below 0.5 Hz, the simulations were obtained by using synthetic Green's functions, which are synthetic seismograms calculated by an explicit 2D /3D elastic finite difference wave propagation routine. By using a range of rupture scenarios for all considerable-magnitude earthquakes throughout the PIF segments, we produced a hazard calculation for frequencies of 0.1-20 Hz. The physically based PSHA used here followed the same procedure as conventional PSHA, except that conventional PSHA utilizes point sources or a series of point sources to represent earthquakes, and this approach utilizes the full rupture of earthquakes along faults. Furthermore, conventional PSHA predicts ground motion parameters by using empirical attenuation relationships, whereas this approach calculates synthetic seismograms for all magnitudes of earthquakes to obtain ground motion parameters. PSHA results were produced for 2, 10, and 50 % hazards for all sites studied in the Marmara region.

Physically-Based Probabilistic Seismic Hazard Analysis Using Broad-Band Ground Motion Simulation: a Case Study for Prince Islands Fault, Marmara Sea

Science.gov (United States)

Mert, A.

2016-12-01

The main motivation of this study is the impending occurrence of a catastrophic earthquake along the Prince Island Fault (PIF) in Marmara Sea and the disaster risk around Marmara region, especially in İstanbul. This study provides the results of a physically-based Probabilistic Seismic Hazard Analysis (PSHA) methodology, using broad-band strong ground motion simulations, for sites within the Marmara region, Turkey, due to possible large earthquakes throughout the PIF segments in the Marmara Sea. The methodology is called physically-based because it depends on the physical processes of earthquake rupture and wave propagation to simulate earthquake ground motion time histories. We include the effects of all considerable magnitude earthquakes. To generate the high frequency (0.5-20 Hz) part of the broadband earthquake simulation, the real small magnitude earthquakes recorded by local seismic array are used as an Empirical Green's Functions (EGF). For the frequencies below 0.5 Hz the simulations are obtained using by Synthetic Green's Functions (SGF) which are synthetic seismograms calculated by an explicit 2D/3D elastic finite difference wave propagation routine. Using by a range of rupture scenarios for all considerable magnitude earthquakes throughout the PIF segments we provide a hazard calculation for frequencies 0.1-20 Hz. Physically based PSHA used here follows the same procedure of conventional PSHA except that conventional PSHA utilizes point sources or a series of point sources to represent earthquakes and this approach utilizes full rupture of earthquakes along faults. Further, conventional PSHA predicts ground-motion parameters using by empirical attenuation relationships, whereas this approach calculates synthetic seismograms for all magnitude earthquakes to obtain ground-motion parameters. PSHA results are produced for 2%, 10% and 50% hazards for all studied sites in Marmara Region.

Advanced Materials Laboratory hazards assessment document

Energy Technology Data Exchange (ETDEWEB)

Barnett, B.; Banda, Z.

1995-10-01

The Department of Energy Order 55OO.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with the AML. The entire inventory was screened according to the potential airborne impact to onsite and offsite individuals. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distance at which a postulated facility event will produce consequences exceeding the Early Severe Health Effects threshold is 23 meters. The highest emergency classification is a General Emergency. The Emergency Planning Zone is a nominal area that conforms to DOE boundaries and physical/jurisdictional boundaries such as fence lines and streets.

Monitoring the degradation of physical properties and fire hazards of high-impact polystyrene composite with different ageing time in natural environments.

Science.gov (United States)

Wang, Bibo; Zhang, Yan; Tao, Youji; Zhou, Xia; Song, Lei; Jie, Ganxin; Hu, Yuan

2018-06-15

The current study aims at monitoring the role of the different natural environments on the physical properties and fire hazards of HIPS composites ageing in Turpan and Qionghai. The results indicated that the chromatic aberration and degradation of surface appearance intensified with the increasing ageing time. More flame retardants migrated and were eroded for HIPS composites ageing in Qionghai than those ageing in Turpan, which was caused by the combination of sunlight, high temperature and rainwater in Qionghai. After degradation in the natural environments, the HIPS composites possessed the lower thermal stability and char residues, more toxic gases release, higher peak heat release rate and fire hazard. For example, the peak heat release rate in Qionghai increased by 88.9%, which is much higher than that of in Turpan (55.6%). Moreover, the tensile strength and elongation at break decreased by 46% and 59% for HIPS composites ageing in Turpan and reduced by 53% and 67% for HIPS composites aged in Qionghai, respectively. The results demonstrate that more serious degradation of physical properties and higher fire hazard for HIPS composites ageing in Qionghai than those in Turpan due to the different natural ageing environments. Copyright © 2018 Elsevier B.V. All rights reserved.

Natural Hazards, Second Edition

Science.gov (United States)

Rouhban, Badaoui

Natural disaster loss is on the rise, and the vulnerability of the human and physical environment to the violent forces of nature is increasing. In many parts of the world, disasters caused by natural hazards such as earthquakes, floods, landslides, drought, wildfires, intense windstorms, tsunami, and volcanic eruptions have caused the loss of human lives, injury, homelessness, and the destruction of economic and social infrastructure. Over the last few years, there has been an increase in the occurrence, severity, and intensity of disasters, culminating with the devastating tsunami of 26 December 2004 in South East Asia.Natural hazards are often unexpected or uncontrollable natural events of varying magnitude. Understanding their mechanisms and assessing their distribution in time and space are necessary for refining risk mitigation measures. This second edition of Natural Hazards, (following a first edition published in 1991 by Cambridge University Press), written by Edward Bryant, associate dean of science at Wollongong University, Australia, grapples with this crucial issue, aspects of hazard prediction, and other issues. The book presents a comprehensive analysis of different categories of hazards of climatic and geological origin.

DEMAND FOR AND SUPPLY OF MARK-UP AND PLS FUNDS IN ISLAMIC BANKING: SOME ALTERNATIVE EXPLANATIONS

OpenAIRE

KHAN, TARIQULLAH

1995-01-01

Profit and loss-sharing (PLS) and bai’ al murabahah lil amir bil shira (mark-up) are the two parent principles of Islamic financing. The use of PLS is limited and that of mark-up overwhelming in the operations of the Islamic banks. Several studies provide different explanations for this phenomenon. The dominant among these is the moral hazard hypothesis. Some alternative explanations are given in the present paper. The discussion is based on both demand (user of funds) and supply (bank) side ...

Benefits and hazards of nuclear power

International Nuclear Information System (INIS)

Barnert, H.; Borsch, P.; Feldmann, A.; Merz, E.; Muench, E.; Oesterwind, D.; Voss, A.; Wolters, J.

1979-09-01

Compilation of a seminar at the KFA Juelich on topical problems of nuclear power. Subjects: Energy demand, its expected development and possibilities of coverage; physical fundamentals and technical realisation of power generation by nuclear fission; fuel cycle problems and solutions; effects of radioactive radiation; safety of nuclear power plants and the nuclear hazard as compared with other hazards. (orig./RW) [de

Particle physics and polyedra proximity calculation for hazard simulations in large-scale industrial plants

Science.gov (United States)

Plebe, Alice; Grasso, Giorgio

2016-12-01

This paper describes a system developed for the simulation of flames inside an open-source 3D computer graphic software, Blender, with the aim of analyzing in virtual reality scenarios of hazards in large-scale industrial plants. The advantages of Blender are of rendering at high resolution the very complex structure of large industrial plants, and of embedding a physical engine based on smoothed particle hydrodynamics. This particle system is used to evolve a simulated fire. The interaction of this fire with the components of the plant is computed using polyhedron separation distance, adopting a Voronoi-based strategy that optimizes the number of feature distance computations. Results on a real oil and gas refining industry are presented.

A physically based criterion for hydraulic hazard mapping

Science.gov (United States)

Milanesi, Luca; Pilotti, Marco; Petrucci, Olga

2013-04-01

Hydraulic hazard maps are widely used for land use and emergency planning. Due to their practical consequences, it is important that their meaning is effectively transferred and shared by the stakeholders; to this purpose maps should communicate hazard levels moving from the potential consequences on specified targets. For these reasons flood maps showing only the extension of the inundated areas or flow features as depth and/or velocity may reveal themselves as ineffective instruments. The selection of the specific target to analyse must, in our opinion, be site-specific and reflect land use and/or the hydraulics features of the phenomenon. In case of sudden processes, such as torrential floods or debris flows, hazard levels should be referred to human life, because emergency plans may not mitigate risk; on the contrary, when the time scale of the flood wave propagation is sufficiently larger than the warning system one, the focus might move to the economic value of properties, since human-focused criteria may result in too severe land planning restrictions. This contribution starts exploring, from a theoretical point of view, human hazard levels as drowning, toppling and friction stability limits, which are the main failure mechanisms of human stability in flows. The proposed approach considers the human body, set on a slope and hit by a current of known density, as a combination of cylinders with different dimensions. The drowning threshold is identified through a limiting water depth, while toppling and translation are studied respectively through a moment and momentum balance. The involved forces are the friction at the bottom, the destabilizing drag force exerted by the current, the human weight and buoyancy. Several threshold curves on the velocity-depth plane can be identified as a function of different masses and heights for children and adults. Because of its dependence from the fluid density, this methodology may be applied also to define hazard

HAZARDOUS CHILD LABOR & PSYCHO-PHYSICAL AND ECONOMIC CONSEQUENCES: A STUDY IN SYLHET CITY, BANGLADESH

Directory of Open Access Journals (Sweden)

Mohammad Nashir Uddin

2014-01-01

Full Text Available Children of developing countries, by and large, have been working in different kinds of economic activities either on territorial (urban/rural distribution or on sectoral (formal / informal and / or organized / unorganized allocation basis. They used to work in manufacturing plants, small factories, metal and construction works. The inductive study is based on social survey aiming at unveiling the physical and mental discomforts of children involved in hazardous formal and/or informal economic sectors. Decisive examination of both primary and secondary data was made for in-depth analysis. Around 90% children under survey were suffering from different psycho-physical diseases while above half of them availed Medicaid and care from locally self-trained physicians who possessed no recognized knowledge of medical care. In addition, child workers are less-paid than those of adults. The study concluded that working at an early age causes problems of health and safety; and thereby get impeded their intellectual development and natural growth which causes severe negative consequences on economic potentials.

Flood hazard assessment in areas prone to flash flooding

Science.gov (United States)

Kvočka, Davor; Falconer, Roger A.; Bray, Michaela

2016-04-01

Contemporary climate projections suggest that there will be an increase in the occurrence of high-intensity rainfall events in the future. These precipitation extremes are usually the main cause for the emergence of extreme flooding, such as flash flooding. Flash floods are among the most unpredictable, violent and fatal natural hazards in the world. Furthermore, it is expected that flash flooding will occur even more frequently in the future due to more frequent development of extreme weather events, which will greatly increase the danger to people caused by flash flooding. This being the case, there will be a need for high resolution flood hazard maps in areas susceptible to flash flooding. This study investigates what type of flood hazard assessment methods should be used for assessing the flood hazard to people caused by flash flooding. Two different types of flood hazard assessment methods were tested: (i) a widely used method based on an empirical analysis, and (ii) a new, physically based and experimentally calibrated method. Two flash flood events were considered herein, namely: the 2004 Boscastle flash flood and the 2007 Železniki flash flood. The results obtained in this study suggest that in the areas susceptible to extreme flooding, the flood hazard assessment should be conducted using methods based on a mechanics-based analysis. In comparison to standard flood hazard assessment methods, these physically based methods: (i) take into account all of the physical forces, which act on a human body in floodwater, (ii) successfully adapt to abrupt changes in the flow regime, which often occur for flash flood events, and (iii) rapidly assess a flood hazard index in a relatively short period of time.

Innovative assesment of the seismic hazard from Vrancea sources

International Nuclear Information System (INIS)

Panza, Giuliano Francesco

2002-01-01

In the framework of a very fruitful, stimulating and still ongoing collaboration between the National Institute for Earth Physics - Bucharest, the Department of Earth Sciences - University of Trieste and The Abdus Salam International Center for Theoretical Physics - SAND Group, several innovative steps forwards have been made in the assessment of the seismic hazard generated by Vrancea seismicity. The limits of currently applied probabilistic approaches are partly overcome by the introduction of hazard scenarios based on the deterministic, realistic modeling of ground motion. The ongoing co-operation represents a fundamental contribution to the reliable assessment of seismic hazard, and has been recently enriched by the participation of Bulgarian scientists, who are facing, in the urban settlements close to the Romanian border, a seismic hazard similar to the one in Bucharest. (author)

Geomorphological hazards in Swat valley, Pakistan

International Nuclear Information System (INIS)

Usman, A.

1999-01-01

This study attempts to describe, interpret and analyze, in depth, the varied geomorphological hazards and their impacts prevailing in the swat valley locate in the northern hilly and mountainous regions of Pakistan. The hills and mountains re zones of high geomorphological activity with rapid rates of weathering, active tectonic activities, abundant precipitation, rapid runoff and heavy sediment transport. Due to the varied topography, lithology, steep slope, erodible soil, heavy winter snowfall and intensive rainfall in the spring and summer seasons, several kinds of geomorphological hazards, such as geomorphic gravitational hazards, Fluvial hazards, Glacial hazards, Geo tectonic hazards, are occurring frequently in swat valley. Amongst them, geomorphic gravitational hazards, such as rock fall rock slide, debris slide mud flow avalanches, are major hazards in mountains and hills while fluvial hazards and sedimentation are mainly confined to the alluvial plain and lowlands of the valley. The Getechtonic hazards, on the other hand, have wide spread distribution in the valley the magnitude and occurrence of each king of hazard is thus, varied according to intensity of process and physical geographic environment. This paper discusses the type distribution and damage due to the various geomorphological hazards and their reduction treatments. The study would to be of particular importance and interest to both natural and social scientists, as well as planner, environmentalists and decision-makers for successful developmental interventions in the region. (author)

Prevalence of hazardous exposures in veterinary practice

Energy Technology Data Exchange (ETDEWEB)

Wiggins, P.; Schenker, M.B.; Green, R.; Samuels, S.

1989-01-01

All female graduates of a major U.S. veterinary school were surveyed by mailed questionnaire to obtain details of work practice and hazard exposure during the most recent year worked and during all pregnancies. Exposure questions were based on previously implicated occupational hazards which included anesthetic gases, radiation, zoonoses, prostaglandins, vaccines, physical trauma, and pesticides. The response rate was 86% (462/537). We found that practice type and pregnancy status were major determinants of hazard exposure within the veterinary profession. Small-animal practitioners reported the highest rates of exposure to anesthetic gas (94%), X-ray (90%), and pesticides (57%). Large-animal practitioners reported greater rates of trauma (64%) and potential exposure to prostaglandins (92%), Brucella abortus vaccine (23%), and carbon monoxide (18%). Potentially hazardous workplace practices or equipment were common. Forty-one percent of respondents who reported taking X-rays did not wear film badges, and 76% reported physically restraining animals for X-ray procedures. Twenty-seven percent of the respondents exposed to anesthetic gases worked at facilities which did not have waste anesthetic gas scavenging systems. Women who worked as veterinarians during a pregnancy attempted to reduce exposures to X-rays, insecticides, and other potentially hazardous exposures. Some potentially hazardous workplace exposures are common in veterinary practice, and measures to educate workers and to reduce these exposures should not await demonstration of adverse health effects.

Prevalence of hazardous exposures in veterinary practice

International Nuclear Information System (INIS)

Wiggins, P.; Schenker, M.B.; Green, R.; Samuels, S.

1989-01-01

All female graduates of a major U.S. veterinary school were surveyed by mailed questionnaire to obtain details of work practice and hazard exposure during the most recent year worked and during all pregnancies. Exposure questions were based on previously implicated occupational hazards which included anesthetic gases, radiation, zoonoses, prostaglandins, vaccines, physical trauma, and pesticides. The response rate was 86% (462/537). We found that practice type and pregnancy status were major determinants of hazard exposure within the veterinary profession. Small-animal practitioners reported the highest rates of exposure to anesthetic gas (94%), X-ray (90%), and pesticides (57%). Large-animal practitioners reported greater rates of trauma (64%) and potential exposure to prostaglandins (92%), Brucella abortus vaccine (23%), and carbon monoxide (18%). Potentially hazardous workplace practices or equipment were common. Forty-one percent of respondents who reported taking X-rays did not wear film badges, and 76% reported physically restraining animals for X-ray procedures. Twenty-seven percent of the respondents exposed to anesthetic gases worked at facilities which did not have waste anesthetic gas scavenging systems. Women who worked as veterinarians during a pregnancy attempted to reduce exposures to X-rays, insecticides, and other potentially hazardous exposures. Some potentially hazardous workplace exposures are common in veterinary practice, and measures to educate workers and to reduce these exposures should not await demonstration of adverse health effects

Ultra-violet radiation - hazard in workplaces? (part I)

International Nuclear Information System (INIS)

Mohd Yusof Mohd Ali

2003-01-01

Not many workers are aware that apart from chemicals, physical agents, noise and machines which are known to be hazardous in workplaces, there exist another source of hazard which is equally important to be recognised and respected, that is hazard due to ultrviolet radiation (UV). This article presents some basics information on UV hazard and various protective measures that could be taken so that any workplace where UV source are present can be ensured safe for general public to enter and for workers to work in. (Author)

Reactor physics tests of TRIGA Mark-II Reactor in Ljubljana

International Nuclear Information System (INIS)

Ravnik, M.; Mele, I.; Trkov, A.; Rant, J.; Glumac, B.; Dimic, V.

2008-01-01

TRIGA Mark-II Reactor in Ljubljana was recently reconstructed. The reconstruction consisted mainly of replacing the grid plates, the control rod mechanisms and the control unit. The standard type control rods were replaced by the fuelled follower type, the central grid location (A ring) was adapted for fuel element insertion, the triangular cutouts were introduced in the upper plate design. However, the main novelty in reactor physics and operational features of the reactor was the installation of a pulse rod. Having no previous operational experience in pulsing, a detailed and systematic sequence of tests was defined in order to check the predicted design parameters of the reactor with measurements. The following experiments are treated in this paper: initial criticality, excess reactivity measurements, control rod worth measurement, fuel temperature distribution, fuel temperature reactivity coefficient, pulse parameters measurement (peak power, prompt energy, peak temperature). Flux distributions in steady state and pulse mode were measured as well, however, they are treated only briefly due to the volume of the results. The experiments were performed with completely fresh fuel of 12 w% enriched Standard Stainless Steel type. The core configuration was uniform (one fuel element type, including fuelled followers) and compact (no irradiation channels or gaps), as such being particularly convenient for testing the computer codes for TRIGA reactor calculations. Comparison of analytical predictions, obtained with WIMS, SLXTUS, TRIGAP and PULSTRI codes to measured values showed agreement within the error of the measurement and calculation. The paper has the following contents: 1. Introduction; 2. Steady State Experiments; 2.1. Core loading and critical experiment; 2.2. Flux range determination for tests at zero power; 2.3. Digital reactivity meter checkout; 2.4. Control rod worth measurements; 2.5. Excess reactivity measurement; 2.6. Thermal power calibration; 2

The status of the SLAC Linear Collider and of the Mark II detector

International Nuclear Information System (INIS)

Lankford, A.J.

1987-10-01

At SLAC we are currently involved in the exciting challenge of commissioning the first example of a new type of colliding beam accelerator, the SLAC Linear Collider, or SLC. The goals of the SLC are two-fold. It will explore the concept of linear colliders, and it will allow the study of physics on the Z 0 resonance. It accomplishes these goals by exploiting the existing SLAC linac and the large visible cross-section of approximately thirty nanobarns of the Z 0 . The MARK II detector will have the opportunity to be first to explore the physics in this regime. This paper briefly reports the status of the SLC and of the MARK II as of early October 1987, at which time commissioning efforts were interrupted in order to place the MARK II detector at the collision point and to incorporate some improvements to the SLC. The first portion of this report highlights some of the milestones achieved in the SLC commissioning and some of the problems encountered. The last portion outlines improvements made to the MARK II for physics at the SLC. 10 refs., 12 figs., 1 tab

Ultra-violet radiation: hazard in workplaces? (part II)

International Nuclear Information System (INIS)

Mohd Yusof Mohd Ali

2003-01-01

Not many workers are aware that apart from chemicals, physical agents, noise and machines which are known to be hazardous in workplaces, there exist another source of hazard which is equally important to be recognised and respected, that is hazard due to ultrviolet radiation (UV). This is the continuation of part I, which was discussed in the later issue. In this part, hazard of ultraviolet radiation were briefly discused i.e. effects on the skin and the eyes. Other subjects discussed are exposure limits, how to assess the radiation, protection against ultraviolet radiation

Z0 physics from the Mark II at the SLC [SLAC Linear Collider

International Nuclear Information System (INIS)

Abrams, G.S.

1989-06-01

The MARK II detector has started to take data at the new SLAC Linear Collider. The novel aspects of the accelerator and of the MARK II are briefly described. Displays of event pictures from some of the early-on data are presented to illustrate the quality of the data. A first presentation of the results of an energy scan near the Z 0 mass that is currently in progress shows the expected resonant enhancement near 91 GeV. 2 refs., 23 figs., 1 tab

Manikin-Based Size-Resolved Penetrations of CE-marked Filtering Facepiece Respirators.

Czech Academy of Sciences Publication Activity Database

Serfozo, N.; Ondráček, Jakub; Otáhal, P.; Lazaridis, M.; Ždímal, Vladimír

2017-01-01

Roč. 14, č. 12 (2017), s. 965-974 ISSN 1545-9624 EU Projects: European Commission(XE) 315760 - HEXACOMM Institutional support: RVO:67985858 Keywords : size-resolved penetration * manikin-based study * CE-marked respirator Subject RIV: CF - Physical ; Theoretical Chemistry OBOR OECD: Physical chemistry Impact factor: 1.200, year: 2016

Seismic hazard assessment: Issues and alternatives

Science.gov (United States)

Wang, Z.

2011-01-01

Seismic hazard and risk are two very important concepts in engineering design and other policy considerations. Although seismic hazard and risk have often been used inter-changeably, they are fundamentally different. Furthermore, seismic risk is more important in engineering design and other policy considerations. Seismic hazard assessment is an effort by earth scientists to quantify seismic hazard and its associated uncertainty in time and space and to provide seismic hazard estimates for seismic risk assessment and other applications. Although seismic hazard assessment is more a scientific issue, it deserves special attention because of its significant implication to society. Two approaches, probabilistic seismic hazard analysis (PSHA) and deterministic seismic hazard analysis (DSHA), are commonly used for seismic hazard assessment. Although PSHA has been pro-claimed as the best approach for seismic hazard assessment, it is scientifically flawed (i.e., the physics and mathematics that PSHA is based on are not valid). Use of PSHA could lead to either unsafe or overly conservative engineering design or public policy, each of which has dire consequences to society. On the other hand, DSHA is a viable approach for seismic hazard assessment even though it has been labeled as unreliable. The biggest drawback of DSHA is that the temporal characteristics (i.e., earthquake frequency of occurrence and the associated uncertainty) are often neglected. An alternative, seismic hazard analysis (SHA), utilizes earthquake science and statistics directly and provides a seismic hazard estimate that can be readily used for seismic risk assessment and other applications. ?? 2010 Springer Basel AG.

Physical and toxic properties of hazardous chemicals regularly stored and transported in the vicinity of nuclear installations

International Nuclear Information System (INIS)

1976-03-01

This report gives a compilation of data based on information assembled by the US Nuclear Regulatory Commission and completed by the Safety and Reliability Directorate of the UK AEA, the Dutch Reactor Safety Commission, the French Atomic Energy Commission, and the CSNI Secretariat. Data sheets for a large number of hazardous chemicals are presented (from acetaldehyde to xylene), giving details of their physical and toxic properties such as: molecular weight, boiling point, vapor density, heat of vaporization, toxic concentration in air, flammability limits, toxic effects, vapor pressure data, etc.

Natural hazards science strategy

Science.gov (United States)

Holmes, Robert R.; Jones, Lucile M.; Eidenshink, Jeffery C.; Godt, Jonathan W.; Kirby, Stephen H.; Love, Jeffrey J.; Neal, Christina A.; Plant, Nathaniel G.; Plunkett, Michael L.; Weaver, Craig S.; Wein, Anne; Perry, Suzanne C.

2012-01-01

The mission of the U.S. Geological Survey (USGS) in natural hazards is to develop and apply hazard science to help protect the safety, security, and economic well-being of the Nation. The costs and consequences of natural hazards can be enormous, and each year more people and infrastructure are at risk. USGS scientific research—founded on detailed observations and improved understanding of the responsible physical processes—can help to understand and reduce natural hazard risks and to make and effectively communicate reliable statements about hazard characteristics, such as frequency, magnitude, extent, onset, consequences, and where possible, the time of future events.To accomplish its broad hazard mission, the USGS maintains an expert workforce of scientists and technicians in the earth sciences, hydrology, biology, geography, social and behavioral sciences, and other fields, and engages cooperatively with numerous agencies, research institutions, and organizations in the public and private sectors, across the Nation and around the world. The scientific expertise required to accomplish the USGS mission in natural hazards includes a wide range of disciplines that this report refers to, in aggregate, as hazard science.In October 2010, the Natural Hazards Science Strategy Planning Team (H–SSPT) was charged with developing a long-term (10-year) Science Strategy for the USGS mission in natural hazards. This report fulfills that charge, with a document hereinafter referred to as the Strategy, to provide scientific observations, analyses, and research that are critical for the Nation to become more resilient to natural hazards. Science provides the information that decisionmakers need to determine whether risk management activities are worthwhile. Moreover, as the agency with the perspective of geologic time, the USGS is uniquely positioned to extend the collective experience of society to prepare for events outside current memory. The USGS has critical statutory

Review of hazards to female reproductive health in veterinary practice.

Science.gov (United States)

Scheftel, Joni M; Elchos, Brigid L; Rubin, Carol S; Decker, John A

2017-04-15

OBJECTIVE To review publications that address female reproductive health hazards in veterinary practice, summarize best practices to mitigate reproductive risks, and identify current knowledge gaps. DESIGN Systematized review. SAMPLE English-language articles describing chemical, biological, and physical hazards present in the veterinary workplace and associations with adverse reproductive outcomes or recommendations for minimizing risks to female reproductive health. PROCEDURES Searches of the CAB abstracts database were performed in July 2012 and in May 2015 with the following search terms: veterinarians AND occupational hazards and vets.id AND occupational hazards.sh. Searches of the PubMed database were conducted in November 2012 and in May 2015 with the following medical subject heading terms: occupational exposure AND veterinarians; anesthetics, inhalation/adverse effects AND veterinarians; risk factors AND pregnancy AND veterinarians; pregnancy outcome AND veterinarians; and animal technicians AND occupational exposure. Two additional PubMed searches were completed in January 2016 with the terms disinfectants/toxicity AND female AND fertility/drug effects and veterinarians/psychology AND stress, psychological. No date limits were applied to searches. RESULTS 4 sources supporting demographic trends in veterinary medicine and 118 resources reporting potential hazards to female reproductive health were identified. Reported hazards included exposure to anesthetic gases, radiation, antineoplastic drugs, and reproductive hormones; physically demanding work; prolonged standing; and zoonoses. CONCLUSIONS AND CLINICAL RELEVANCE Demographic information suggested that an increasing number of women of reproductive age will be exposed to chemical, biological, and physical hazards in veterinary practice. Information on reproductive health hazards and minimizing risk, with emphasis on developing a safety-focused work culture for all personnel, should be discussed starting

Enamel-based mark performance for marking Chinese mystery snail Bellamya chinensis

Science.gov (United States)

Wong, Alec; Allen, Craig R.; Hart, Noelle M.; Haak, Danielle M.; Pope, Kevin L.; Smeenk, Nicholas A.; Stephen, Bruce J.; Uden, Daniel R.

2013-01-01

The exoskeleton of gastropods provides a convenient surface for carrying marks, and i the interest of improving future marking methods our laboratory assessed the performance of an enamel paint. The endurance of the paint was also compared to other marking methods assessed in the past. We marked the shells of 30 adult Chinese mystery snails Bellamya chinensis and held them in an aquarium for 181 days. We observed no complete degradation of any enamel-paint mark during the 181 days. The enamel-paint mark was superior to a nai;-polish mark, which lasted a median of 100 days. Enamel-paint marks also have a lower rate of loss (0.00 month-1 181 days) than plastic bee tags (0.01 month-1, 57 days), gouache paint (0.07 month-1, 18.5 days), or car body paint from studies found in scientific literature. Legibility of enamel-paint marks had a median lifetime of 102 days. The use of enamel paint on the shells of gastropods is a viable option for studies lasting up to 6 months. Furthermore, visits to capture-mark-recapture site 1 year after application of enamel-paint marks on B. chinesnis shells produced several individuals on which the enamel paint was still visible, although further testing is required to clarify durability over longer periods.

Probabilistic Volcanic Multi-Hazard Assessment at Somma-Vesuvius (Italy): coupling Bayesian Belief Networks with a physical model for lahar propagation

Science.gov (United States)

Tierz, Pablo; Woodhouse, Mark; Phillips, Jeremy; Sandri, Laura; Selva, Jacopo; Marzocchi, Warner; Odbert, Henry

2017-04-01

Volcanoes are extremely complex physico-chemical systems where magma formed at depth breaks into the planet's surface resulting in major hazards from local to global scales. Volcano physics are dominated by non-linearities, and complicated spatio-temporal interrelationships which make volcanic hazards stochastic (i.e. not deterministic) by nature. In this context, probabilistic assessments are required to quantify the large uncertainties related to volcanic hazards. Moreover, volcanoes are typically multi-hazard environments where different hazardous processes can occur whether simultaneously or in succession. In particular, explosive volcanoes are able to accumulate, through tephra fallout and Pyroclastic Density Currents (PDCs), large amounts of pyroclastic material into the drainage basins surrounding the volcano. This addition of fresh particulate material alters the local/regional hydrogeological equilibrium and increases the frequency and magnitude of sediment-rich aqueous flows, commonly known as lahars. The initiation and volume of rain-triggered lahars may depend on: rainfall intensity and duration; antecedent rainfall; terrain slope; thickness, permeability and hydraulic diffusivity of the tephra deposit; etc. Quantifying these complex interrelationships (and their uncertainties), in a tractable manner, requires a structured but flexible probabilistic approach. A Bayesian Belief Network (BBN) is a directed acyclic graph that allows the representation of the joint probability distribution for a set of uncertain variables in a compact and efficient way, by exploiting unconditional and conditional independences between these variables. Once constructed and parametrized, the BBN uses Bayesian inference to perform causal (e.g. forecast) and/or evidential reasoning (e.g. explanation) about query variables, given some evidence. In this work, we illustrate how BBNs can be used to model the influence of several variables on the generation of rain-triggered lahars

Onsite transportation hazards assessment

International Nuclear Information System (INIS)

Burnside, M.E.

1998-01-01

This report documents the emergency preparedness Hazards Assessment for the onsite transportation of hazardous material at the Hanford Site. The assessment is required by US Department of Energy (DOE) Order 5500.3A and provides the technical basis for the emergency classification and response procedures. A distinction is made between onsite for the purpose of emergency preparedness and onsite for the purpose of applying US Department of Transportation (DOT) regulations. Onsite for the purpose of emergency preparedness is considered to be within the physical boundary of the entire Hanford Site. Onsite for the purpose of applying DOT regulations is north of the Wye Barricade

Administering and Detecting Protein Marks on Arthropods for Dispersal Research.

Science.gov (United States)

Hagler, James R; Machtley, Scott A

2016-01-28

Monitoring arthropod movement is often required to better understand associated population dynamics, dispersal patterns, host plant preferences, and other ecological interactions. Arthropods are usually tracked in nature by tagging them with a unique mark and then re-collecting them over time and space to determine their dispersal capabilities. In addition to actual physical tags, such as colored dust or paint, various types of proteins have proven very effective for marking arthropods for ecological research. Proteins can be administered internally and/or externally. The proteins can then be detected on recaptured arthropods with a protein-specific enzyme-linked immunosorbent assay (ELISA). Here we describe protocols for externally and internally tagging arthropods with protein. Two simple experimental examples are demonstrated: (1) an internal protein mark introduced to an insect by providing a protein-enriched diet and (2) an external protein mark topically applied to an insect using a medical nebulizer. We then relate a step-by-step guide of the sandwich and indirect ELISA methods used to detect protein marks on the insects. In this demonstration, various aspects of the acquisition and detection of protein markers on arthropods for mark-release-recapture, mark-capture, and self-mark-capture types of research are discussed, along with the various ways that the immunomarking procedure has been adapted to suit a wide variety of research objectives.

Occupational hazards to health of port workers.

Science.gov (United States)

Wang, Yukun; Zhan, Shuifen; Liu, Yan; Li, Yan

2017-12-01

The aim of this article is to reduce the risk of occupational hazards and improve safety conditions by enhancing hazard knowledge and identification as well as improving safety behavior for freight port enterprises. In the article, occupational hazards to health and their prevention measures of freight port enterprises have been summarized through a lot of occupational health evaluation work, experience and understanding. Workers of freight port enterprises confront an equally wide variety of chemical, physical and psychological hazards in production technology, production environment and the course of labor. Such health hazards have been identified, the risks evaluated, the dangers to health notified and effective prevention measures which should be put in place to ensure the health of the port workers summarized. There is still a long way to go for the freight port enterprises to prevent and control the occupational hazards. Except for occupational hazards and their prevention measures, other factors that influence the health of port workers should also be paid attention to, such as age, work history, gender, contraindication and even the occurrence and development rules of occupational hazards in current production conditions.

Hazardous Material Packaging and Transportation

Energy Technology Data Exchange (ETDEWEB)

Hypes, Philip A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-02-04

This is a student training course. Some course objectives are to: recognize and use standard international and US customary units to describe activities and exposure rates associated with radioactive material; determine whether a quantity of a single radionuclide meets the definition of a class 7 (radioactive) material; determine, for a given single radionuclide, the shipping quantity activity limits per 49 Code of Federal Regulations (CFR) 173.435; determine the appropriate radioactive material hazard class proper shipping name for a given material; determine when a single radionuclide meets the DOT definition of a hazardous substance; determine the appropriate packaging required for a given radioactive material; identify the markings to be placed on a package of radioactive material; determine the label(s) to apply to a given radioactive material package; identify the entry requirements for radioactive material labels; determine the proper placement for radioactive material label(s); identify the shipping paper entry requirements for radioactive material; select the appropriate placards for a given radioactive material shipment or vehicle load; and identify allowable transport limits and unacceptable transport conditions for radioactive material.

Debris flows: behavior and hazard assessment

Science.gov (United States)

Iverson, Richard M.

2014-01-01

Debris flows are water-laden masses of soil and fragmented rock that rush down mountainsides, funnel into stream channels, entrain objects in their paths, and form lobate deposits when they spill onto valley floors. Because they have volumetric sediment concentrations that exceed 40 percent, maximum speeds that surpass 10 m/s, and sizes that can range up to ~109 m3, debris flows can denude slopes, bury floodplains, and devastate people and property. Computational models can accurately represent the physics of debris-flow initiation, motion and deposition by simulating evolution of flow mass and momentum while accounting for interactions of debris' solid and fluid constituents. The use of physically based models for hazard forecasting can be limited by imprecise knowledge of initial and boundary conditions and material properties, however. Therefore, empirical methods continue to play an important role in debris-flow hazard assessment.

Estimating hurricane hazards using a GIS system

Directory of Open Access Journals (Sweden)

A. Taramelli

2008-08-01

Full Text Available This paper develops a GIS-based integrated approach to the Multi-Hazard model method, with reference to hurricanes. This approach has three components: data integration, hazard assessment and score calculation to estimate elements at risk such as affected area and affected population. First, spatial data integration issues within a GIS environment, such as geographical scales and data models, are addressed. Particularly, the integration of physical parameters and population data is achieved linking remotely sensed data with a high resolution population distribution in GIS. In order to assess the number of affected people, involving heterogeneous data sources, the selection of spatial analysis units is basic. Second, specific multi-hazard tasks, such as hazard behaviour simulation and elements at risk assessment, are composed in order to understand complex hazard and provide support for decision making. Finally, the paper concludes that the integrated approach herein presented can be used to assist emergency management of hurricane consequences, in theory and in practice.

COMPUTER HARDWARE MARKING

CERN Multimedia

Groupe de protection des biens

2000-01-01

As part of the campaign to protect CERN property and for insurance reasons, all computer hardware belonging to the Organization must be marked with the words 'PROPRIETE CERN'.IT Division has recently introduced a new marking system that is both economical and easy to use. From now on all desktop hardware (PCs, Macintoshes, printers) issued by IT Division with a value equal to or exceeding 500 CHF will be marked using this new system.For equipment that is already installed but not yet marked, including UNIX workstations and X terminals, IT Division's Desktop Support Service offers the following services free of charge:Equipment-marking wherever the Service is called out to perform other work (please submit all work requests to the IT Helpdesk on 78888 or helpdesk@cern.ch; for unavoidable operational reasons, the Desktop Support Service will only respond to marking requests when these coincide with requests for other work such as repairs, system upgrades, etc.);Training of personnel designated by Division Leade...

Control of uranium hazards - Portsmouth uranium enrichment plant

International Nuclear Information System (INIS)

Wagner, E.R.

1985-01-01

This report summarizes the Environmental, Safety and Health programs to control uranium hazards at the Portsmouth Gaseous Diffusion Plant. A description of the physical plant, the facility processes and the attendant uranium flows and effluents are provided. The hazards of uranium are discussed and the control systems are outlined. Finally, the monitoring programs are described and summaries of recent data are provided. 11 figs., 20 tabs

Physical properties and strength of cohesive strata from a hazardous area at the Western long-term slope of the Turow surface mine

Energy Technology Data Exchange (ETDEWEB)

Konderla, H; Suchnicka, H [Politechnika Wroclawska (Poland)

1991-01-01

Evaluates landslide hazards in the Turow brown coal mine in the area of a safety pillar of the Neisse river. Physical and mechanical properties of the following types of rocks from the pillar were investigated under laboratory conditions: cohesive Quaternary strata, clay layers adjacent to the coal seams and separating the seams, weathered and disintegrated granite, basalt and tuff (detritus). Rock samples were tested under conditions of tri-axial stresses, with natural water pore pressure, samples with a natural structure without artificial consolidation. The tests showed intensive fluctuations of rock properties. Nonhomogeneity of the samples and structural disturbances were determined. The tests showed the existence of landslide hazards in the Neisse river area. Recommendations for further investigations are made. 3 refs.

Utilization of Slovenian TRIGA Mark II reactor

International Nuclear Information System (INIS)

Snoj, L.; Smodis, B.

2010-01-01

TRIGA Mark II research reactor at the Jozef Stefan Institute [JSI] is extensively used for various applications, such as: irradiation of various samples, training and education, verification and validation of nuclear data and computer codes, testing and development of experimental equipment used for core physics tests at a nuclear power plant. The paper briefly describes the aforementioned activities and shows that even such small reactors are still indispensable in nuclear science and technology. (author)

Distinguishing butchery cut marks from crocodile bite marks through machine learning methods.

Science.gov (United States)

Domínguez-Rodrigo, Manuel; Baquedano, Enrique

2018-04-10

All models of evolution of human behaviour depend on the correct identification and interpretation of bone surface modifications (BSM) on archaeofaunal assemblages. Crucial evolutionary features, such as the origin of stone tool use, meat-eating, food-sharing, cooperation and sociality can only be addressed through confident identification and interpretation of BSM, and more specifically, cut marks. Recently, it has been argued that linear marks with the same properties as cut marks can be created by crocodiles, thereby questioning whether secure cut mark identifications can be made in the Early Pleistocene fossil record. Powerful classification methods based on multivariate statistics and machine learning (ML) algorithms have previously successfully discriminated cut marks from most other potentially confounding BSM. However, crocodile-made marks were marginal to or played no role in these comparative analyses. Here, for the first time, we apply state-of-the-art ML methods on crocodile linear BSM and experimental butchery cut marks, showing that the combination of multivariate taphonomy and ML methods provides accurate identification of BSM, including cut and crocodile bite marks. This enables empirically-supported hominin behavioural modelling, provided that these methods are applied to fossil assemblages.

Radiation hazard control report

International Nuclear Information System (INIS)

Morishima, Hiroshige; Koga, Taeko; Hisanaga, Saemi; Miki, Ryota; Kawai, Hiroshi; Aoki, Yutaka; Sone, Koji; Okada, Hirokazu

1990-01-01

The report describes the radiation hazard control activities performed at the Atomic Energy Research Institute of Kinki University, Japan, during the one-year period from April 1989 to March 1990. Personal radiation hazard control is outlined first focusing on results of physical examination and data of personal exposure dose equivalent. Radiation control in laboratory is then described. Dose equivalent at various places is discussed on the basis of monthly total dose equivalent measured on film badges, measurements made by TLD, and observations made through a continuous radiations monitoring system. The concentration of radiations in air and water is discussed focusing on their measured concentrations in air at the air outlets of tracer/accelerator facilities, and radioactivity in waste water sampled in the reactor facilities and tracer/accelerator facilities. Another discussion is made on the surface contamination density over the floors, draft systems, sink surface, etc. Concerning outdoor radiation hazard control, furthermore, TLD measurements of environmental gamma-rays, data on total gamma-ray radioactivity in environmental samples, and analysis of gamma-ray emitting nuclides in environmental samples are described and discussed. (N.K.)

Snow avalanche hazard of the Krkonose National Park, Czech Republic

Czech Academy of Sciences Publication Activity Database

Blahůt, Jan; Klimeš, Jan; Balek, Jan; Hájek, P.; Červená, L.; Lysák, J.

2017-01-01

Roč. 13, č. 2 (2017), s. 86-90 ISSN 1744-5647 R&D Projects: GA MV VG20132015115 Institutional support: RVO:67985891 Keywords : snow avalanches * hazard * inventory * hazard mitigation * Krkonoše Subject RIV: DE - Earth Magnetism, Geodesy, Geography OBOR OECD: Physical geography Impact factor: 2.174, year: 2016

LAV@HAZARD: a Web-GIS Framework for Real-Time Forecasting of Lava Flow Hazards

Science.gov (United States)

Del Negro, C.; Bilotta, G.; Cappello, A.; Ganci, G.; Herault, A.

2014-12-01

Crucial to lava flow hazard assessment is the development of tools for real-time prediction of flow paths, flow advance rates, and final flow lengths. Accurate prediction of flow paths and advance rates requires not only rapid assessment of eruption conditions (especially effusion rate) but also improved models of lava flow emplacement. Here we present the LAV@HAZARD web-GIS framework, which combines spaceborne remote sensing techniques and numerical simulations for real-time forecasting of lava flow hazards. By using satellite-derived discharge rates to drive a lava flow emplacement model, LAV@HAZARD allows timely definition of parameters and maps essential for hazard assessment, including the propagation time of lava flows and the maximum run-out distance. We take advantage of the flexibility of the HOTSAT thermal monitoring system to process satellite images coming from sensors with different spatial, temporal and spectral resolutions. HOTSAT was designed to ingest infrared satellite data acquired by the MODIS and SEVIRI sensors to output hot spot location, lava thermal flux and discharge rate. We use LAV@HAZARD to merge this output with the MAGFLOW physics-based model to simulate lava flow paths and to update, in a timely manner, flow simulations. Thus, any significant changes in lava discharge rate are included in the predictions. A significant benefit in terms of computational speed was obtained thanks to the parallel implementation of MAGFLOW on graphic processing units (GPUs). All this useful information has been gathered into the LAV@HAZARD platform which, due to the high degree of interactivity, allows generation of easily readable maps and a fast way to explore alternative scenarios. We will describe and demonstrate the operation of this framework using a variety of case studies pertaining to Mt Etna, Sicily. Although this study was conducted on Mt Etna, the approach used is designed to be applicable to other volcanic areas around the world.

Overview of Food Safety Hazards in the European Dairy Supply Chain

NARCIS (Netherlands)

Asselt, Van E.D.; Fels, van der Ine; Marvin, H.J.P.; Bokhorst-van De Veen, Van H.; Nierop Groot, M.

2017-01-01

Monitoring of dairy products should preferably focus on the most relevant food safety hazards in the dairy supply chain. For this purpose, the possible presence of microbiological, chemical, and physical hazards as well as trends in the dairy supply chain that may affect their presence were

Mark Tompkins Canaccord

OpenAIRE

Mark Tompkins Canaccord

2018-01-01

Mark Tompkins Canaccord is a senior technologist for ecosystem and water resources management in SEC SAID Oakland, California office. In his career which lasts over fifteen years Mark has worked on project involving lake restorations, clean water engineering, ecological engineering and management, hydrology, hydraulics, sediment transport and other projects for environmental planning all over the country. Mark Tompkins Canaccord tries to blend his skills of planning and engineering with s...

Reconfiguring trade mark law

DEFF Research Database (Denmark)

Elsmore, Matthew James

2013-01-01

-border setting, with a particular focus on small business and consumers. The article's overall message is to call for a rethink of received wisdom suggesting that trade marks are effective trade-enabling devices. The case is made for reassessing how we think about European trade mark law.......First, this article argues that trade mark law should be approached in a supplementary way, called reconfiguration. Second, the article investigates such a reconfiguration of trade mark law by exploring the interplay of trade marks and service transactions in the Single Market, in the cross...

BWR Mark I pressure suppression study: bench mark experiments

International Nuclear Information System (INIS)

Lai, W.; McCauley, E.W.

1977-01-01

Computer simulations representative of the wetwell of Mark I BWR's have predicted pressures and related phenomena. However, calculational predictions for purposes of engineering decision will be possible only if the code can be verified, i.e., shown to compute in accord with measured values. Described in the report is a set of single downcomer spherical flask bench mark experiments designed to produce quantitative data to validate various air-water dynamic computations; the experiments were performed since relevant bench mark data were not available from outside sources. Secondary purposes of the study were to provide a test bed for the instrumentation and post-experiment data processing techniques to be used in the Laboratory's reactor safety research program and to provide additional masurements for the air-water scaling study

Elemental marking of arthropod pests in agricultural systems: single and multigenerational marking

Science.gov (United States)

Jane Leslie Hayes

1991-01-01

Use of elemental markers to study movement of arthropod pests of field crops is reviewed. Trace elements, rubidium (Rb) and cesium (Cs), have provided a nondisruptive method of marking natural adult populations via developmental stage consumption of treated host plants. Multigenerational marking occurs with the transfer of elemental markers from marked adults to...

Hazard analysis and critical control point (HACCP) for an ultrasound food processing operation.

Science.gov (United States)

Chemat, Farid; Hoarau, Nicolas

2004-05-01

Emerging technologies, such as ultrasound (US), used for food and drink production often cause hazards for product safety. Classical quality control methods are inadequate to control these hazards. Hazard analysis of critical control points (HACCP) is the most secure and cost-effective method for controlling possible product contamination or cross-contamination, due to physical or chemical hazard during production. The following case study on the application of HACCP to an US food-processing operation demonstrates how the hazards at the critical control points of the process are effectively controlled through the implementation of HACCP.

Physical Exposure to Seismic Hazards of Health Facilities in Mexico City, Mexico

Science.gov (United States)

Rodriguez, S. M.; Novelo Casanova, D.

2010-12-01

Although health facilities are essential infrastructure during disasters and emergencies, they are also usually highly vulnerable installations in the case of the occurrence of large and major earthquakes. Hospitals are one of the most complex critical facilities in modern cities and they are used as first response in emergency situations. The operability of a hospital must be maintained after the occurrence of a local strong earthquake in order to satisfy the need for medical care of the affected population. If a health facility is seriously damaged, it cannot fulfill its function when most is needed. In this case, hospitals become a casualty of the disaster. To identify the level of physical exposure of hospitals to seismic hazards in Mexico City, we analyzed their geographic location with respect to the seismic response of the different type of soils of the city from past earthquakes, mainly from the events that occurred on September 1985 (Ms= 8.0) and April 1989 (Ms= 6.9). Seismic wave amplification in this city is the result of the interaction of the incoming seismic waves with the soft and water saturated clay soils, on which a large part of Mexico City is built. The clay soils are remnants of the lake that existed in the Valley of Mexico and which has been drained gradually to accommodate the growing urban sprawl. Hospital facilities were converted from a simple database of names and locations into a map layer of resources. This resource layer was combined with other map layers showing areas of seismic microzonation in Mexico City. This overlay was then used to identify those hospitals that may be threatened by the occurrence of a large or major seismic event. We analyzed the public and private hospitals considered as main health facilities. Our results indicate that more than 50% of the hospitals are highly exposed to seismic hazards. Besides, in most of these health facilities we identified the lack of preventive measures and preparedness to reduce their

Sustainable System for Residual Hazards Management

International Nuclear Information System (INIS)

Kevin M. Kostelnik; James H. Clarke; Jerry L. Harbour

2004-01-01

Hazardous, radioactive and other toxic substances have routinely been generated and subsequently disposed of in the shallow subsurface throughout the world. Many of today's waste management techniques do not eliminate the problem, but rather only concentrate or contain the hazardous contaminants. Residual hazards result from the presence of hazardous and/or contaminated material that remains on-site following active operations or the completion of remedial actions. Residual hazards pose continued risk to humans and the environment and represent a significant and chronic problem that require continuous long-term management (i.e. >1000 years). To protect human health and safeguard the natural environment, a sustainable system is required for the proper management of residual hazards. A sustainable system for the management of residual hazards will require the integration of engineered, institutional and land-use controls to isolate residual contaminants and thus minimize the associated hazards. Engineered controls are physical modifications to the natural setting and ecosystem, including the site, facility, and/or the residual materials themselves, in order to reduce or eliminate the potential for exposure to contaminants of concern (COCs). Institutional controls are processes, instruments, and mechanisms designed to influence human behavior and activity. System failure can involve hazardous material escaping from the confinement because of system degradation (i.e., chronic or acute degradation) or by external intrusion of the biosphere into the contaminated material because of the loss of institutional control. An ongoing analysis of contemporary and historic sites suggests that the significance of the loss of institutional controls is a critical pathway because decisions made during the operations/remedial action phase, as well as decisions made throughout the residual hazards management period, are key to the long-term success of the prescribed system. In fact

Site Specific Probabilistic Seismic Hazard and Risk Analysis for Surrounding Communities of The Geysers Geothermal Development Area

Science.gov (United States)

Miah, M.; Hutchings, L. J.; Savy, J. B.

2014-12-01

We conduct a probabilistic seismic hazard and risk analysis from induced and tectonic earthquakes for a 50 km radius area centered on The Geysers, California and for the next ten years. We calculate hazard with both a conventional and physics-based approach. We estimate site specific hazard. We convert hazard to risk of nuisance and damage to structures per year and map the risk. For the conventional PSHA we assume the past ten years is indicative of hazard for the next ten years from Mnoise. Then, we interpolate within each geologic unit in finely gridded points. All grid points within a unit are weighted by distance from each data collection point. The entire process is repeated for all of the other types of geologic units until the entire area is gridded and assigned a hazard value for every grid points. We found that nuisance and damage risks calculated by both conventional and physics-based approaches provided almost identical results. This is very surprising since they were calculated by completely independent means. The conventional approach used the actual catalog of the past ten years of earthquakes to estimate the hazard for the next ten year. While the physics-based approach used geotechnical modeling to calculate the catalog for the next ten years. Similarly, for the conventional PSHA, we utilized attenuation relations from past earthquakes recorded at the Geysers to translate the ground motion from the source to the site. While for the physics-based approach we calculated ground motion from simulation of actual earthquake rupture. Finally, the source of the earthquakes was the actual source for the conventional PSHA. While, we assumed random fractures for the physics-based approach. From all this, we consider the calculation of the conventional approach, based on actual data, to validate the physics-based approach used.

The Optimizer Topology Characteristics in Seismic Hazards

Science.gov (United States)

Sengor, T.

2015-12-01

The characteristic data of the natural phenomena are questioned in a topological space approach to illuminate whether there is an algorithm behind them bringing the situation of physics of phenomena to optimized states even if they are hazards. The optimized code designing the hazard on a topological structure mashes the metric of the phenomena. The deviations in the metric of different phenomena push and/or pull the fold of the other suitable phenomena. For example if the metric of a specific phenomenon A fits to the metric of another specific phenomenon B after variation processes generated with the deviation of the metric of previous phenomenon A. Defining manifold processes covering the metric characteristics of each of every phenomenon is possible for all the physical events; i.e., natural hazards. There are suitable folds in those manifold groups so that each subfold fits to the metric characteristics of one of the natural hazard category at least. Some variation algorithms on those metric structures prepare a gauge effect bringing the long time stability of Earth for largely scaled periods. The realization of that stability depends on some specific conditions. These specific conditions are called optimized codes. The analytical basics of processes in topological structures are developed in [1]. The codes are generated according to the structures in [2]. Some optimized codes are derived related to the seismicity of NAF beginning from the quakes of the year 1999. References1. Taner SENGOR, "Topological theory and analytical configuration for a universal community model," Procedia- Social and Behavioral Sciences, Vol. 81, pp. 188-194, 28 June 2013, 2. Taner SENGOR, "Seismic-Climatic-Hazardous Events Estimation Processes via the Coupling Structures in Conserving Energy Topologies of the Earth," The 2014 AGU Fall Meeting, Abstract no.: 31374, ABD.

1993 Tier Two emergency and hazardous chemical inventory

International Nuclear Information System (INIS)

1994-03-01

This document comprises the following (January 1 to December 31, 1993) data for chemicals at Hanford Site, for Washington community right-to-know purposes: Chemical name, physical and health hazards, inventory, and storage code/locations

Resilience to Interacting multi-natural hazards

Science.gov (United States)

Zhuo, Lu; Han, Dawei

2016-04-01

temporal changes in hazards and vulnerability during successive hazards; 2) hazard monitoring, forecasting and early warning systems have not fully utilised the domain knowledge of physical processes and the statistical information of the observations; 3) uncertainties have not been well recognised in the current risk management practice, and ignorance of uncertainties could lead to major threat to the society and poor consideration with inefficient or unsustainable preferences of options; 4) there is increasing recognition that the so called 'natural' disasters are not just the consequences of nature-related processes alone, but are attributable to various social, economic, historical, political and cultural causes. However, despite this recognition, the current hazard and risk assessments are fragmented with a weakness in holistically combining quantitative and qualitative information from a variety of sources; 5) successful disaster risk management must be relevant and useful to all stakeholders involved. Efforts should enable the essential common purpose, collective learning and entrepreneurial collaborations that underpin effective and efficient resilience. Therefore, there is an urgent need for the systems thinking framework and decision support system tools in adequate scenario assessment and resilience development from a harmonised and transdisciplinary perspective. It is important that the aforementioned issues should be tackled with a joint effort from a multidisciplinary team in social science, natural science, engineering and systems.

The hazard to man of accidental releases of tritium

International Nuclear Information System (INIS)

Brearley, I.R.

1985-03-01

Some aspects of the atmospheric dispersion of tritium are discussed, followed by consideration of the dosimetric pathways. In order to assess the significance of a tritium release the doses from various pathways are estimated and compared with the doses estimated from a similar release of iodine-131. The major hazard from tritium is the ingestion of contaminated food products. For similar releases of tritium and I 131 the ingestion hazard can be comparable if the release occurs near and before the end of the harvest season. However, in the tritium release case the agricultural season influences the consequences markedly and, at other times during the year, the ingestion hazard from tritium may be approximately 20 times less. The dose from inhalation of tritium is sensitive to its chemical form and for similar releases of tritiated water and tritium gas then the dose from tritiated water is approximately 10 4 greater than the dose from tritium gas. For similar releases of tritiated water and iodine-131 then a comparison of the inhalation shows that the dose from the iodine is approximately 300 times greater. (author)

Levels of and changes in life satisfaction predict mortality hazards: Disentangling the role of physical health, perceived control, and social orientation.

Science.gov (United States)

Hülür, Gizem; Heckhausen, Jutta; Hoppmann, Christiane A; Infurna, Frank J; Wagner, Gert G; Ram, Nilam; Gerstorf, Denis

2017-09-01

It is well documented that well-being typically evinces precipitous decrements at the end of life. However, research has primarily taken a postdictive approach by knowing the outcome (date of death) and aligning, in retrospect, how well-being has changed for people with documented death events. In the present study, we made use of a predictive approach by examining whether and how levels of and changes in life satisfaction prospectively predict mortality hazards and delineate the role of contributing factors, including health, perceived control, and social orientation. To do so, we applied shared parameter growth-survival models to 20-year longitudinal data from 10,597 participants (n = 1,560 [15%] deceased; age at baseline: M = 44 years, SD = 17, range = 18-98 years) from the national German Socio-Economic Panel Study. Our findings showed that lower levels and steeper declines of life satisfaction each uniquely predicted higher mortality risks. Results also revealed moderating effects of age and perceived control: Life satisfaction levels and changes had stronger predictive effects for mortality hazards among older adults. Perceived control was associated with lower mortality hazards; however, this effect was diminished for those who experienced accelerated life satisfaction decline. Variance decomposition suggests that predictive effects of life satisfaction trajectories were partially unique (3%-6%) and partially shared with physical health, perceived control, and social orientation (17%-19%). Our discussion focuses on the strengths and challenges of a predictive approach to link developmental changes (in life satisfaction) to mortality hazards, and considers implications of our findings for healthy aging. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Lujan Mark-4

Energy Technology Data Exchange (ETDEWEB)

Mocko, Michael Jeffrey [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Zavorka, Lukas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Koehler, Paul E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-11-13

This is a review of Mark-IV target neutronics design. It involved the major redesign of the upper tier, offering harder neutron spectra for upper-tier FPs; a redesign of the high-resolution (HR) moderator; and a preservation of the rest of Mark-III features.

Minimal Marking: A Success Story

Science.gov (United States)

McNeilly, Anne

2014-01-01

The minimal-marking project conducted in Ryerson's School of Journalism throughout 2012 and early 2013 resulted in significantly higher grammar scores in two first-year classes of minimally marked university students when compared to two traditionally marked classes. The "minimal-marking" concept (Haswell, 1983), which requires…

Oxygen Plasma Modification of Poss-Coated Kapton(Registered TradeMark) HN Films

Science.gov (United States)

Wohl, C. J.; Belcher, M. A.; Ghose, S.; Connell, J. W.

2008-01-01

The surface energy of a material depends on both surface composition and topographic features. In an effort to modify the surface topography of Kapton(Registered TradeMark) HN film, organic solutions of a polyhedral oligomeric silsesquioxane, octakis(dimethylsilyloxy)silsesquioxane (POSS), were spray-coated onto the Kapton(Registered TradeMark) HN surface. Prior to POSS application, the Kapton(Registered TradeMark) HN film was activated by exposure to radio frequency (RF)-generated oxygen plasma. After POSS deposition and solvent evaporation, the films were exposed to various durations of RF-generated oxygen plasma to create a topographically rich surface. The modified films were characterized using optical microscopy, attenuated total reflection infrared (ATR-IR) spectroscopy, and high-resolution scanning electron microscopy (HRSEM). The physical properties of the modified films will be presented.

Radioactive waste management plan during the TRIGA Mark II and III decommissioning

International Nuclear Information System (INIS)

Jung, K.J.; Park, S.K.; Geong, G.H.; Lee, K.W.; Chung, U.S.; Paik, S.T.

2001-01-01

The decontamination and decommissioning (D and D) project of TRIGA Mark-I and Mark-II (KRR 1 and 2) was started in January 1997 and will be completed by December 2002. In the first year of the project, work was performed in preparation of the decommissioning plan, start of the environmental impact assessment and setup licensing procedure and documentation for the project with cooperation of the Korea Institute of Nuclear Safety (KINS). In the second year, Hyundai Engineering Company (HEC) with British Nuclear Fuels pie (BNFL) as technical assisting partner was designated as the contractor to do design and licensing documentation for the D and D of both reactors. After pre-design, a hazard and operability (HAZOP) study checked each step of the work. At the end of 1998, the decommissioning plan documentation including environmental impact assessment report was finished and submitted to the Ministry of Science and Technology (MOST) for licensing. It is expected to be issued by the end of September 1999. Practical work will then be started around the end of 1999. The safe treatment and management of the radioactive waste arising from the D and D activities is of utmost importance for successful completion of the practical dismantling work. This paper summarizes general aspects of radioactive waste treatment and management plan for the TRIGA Mark-I and II decommissioning work. (author)

40 CFR 156.78 - Precautionary statements for physical or chemical hazards.

Science.gov (United States)

2010-07-01

... Hazards” warning statement. The graphic symbol must be no smaller than twice the size of the first... (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Human Hazard and...) A total release fogger is defined as a pesticide product in a pressurized container designed to...

Mark Stock | NREL

Science.gov (United States)

Stock Mark Stock Scientific Visualization Specialist Mark.Stock@nrel.gov | 303-275-4174 Dr. Stock , virtual reality, parallel computing, and manipulation of large spatial data sets. As an artist, he creates . Stock built the SUNLIGHT artwork that is installed on the Webb Building in downtown Denver. In addition

Review of results from the Mark 2 experiment at SLC

International Nuclear Information System (INIS)

Coupal, D.P.

1990-07-01

This paper reviews results on Z degree physics from the 1989 run of the Mark 2 experiment at the SLAC Linear Collider. Based on about 20 nb -1 we present results on the mass, width and branching ratios of the Z degree boson, the number of light neutrino species, properties of hadronic decays and searches for new particles. 16 refs., 9 figs

Contribution of physical modelling to climate-driven landslide hazard mapping: an alpine test site

Science.gov (United States)

Vandromme, R.; Desramaut, N.; Baills, A.; Hohmann, A.; Grandjean, G.; Sedan, O.; Mallet, J. P.

2012-04-01

The aim of this work is to develop a methodology for integrating climate change scenarios into quantitative hazard assessment and especially their precipitation component. The effects of climate change will be different depending on both the location of the site and the type of landslide considered. Indeed, mass movements can be triggered by different factors. This paper describes a methodology to address this issue and shows an application on an alpine test site. Mechanical approaches represent a solution for quantitative landslide susceptibility and hazard modeling. However, as the quantity and the quality of data are generally very heterogeneous at a regional scale, it is necessary to take into account the uncertainty in the analysis. In this perspective, a new hazard modeling method is developed and integrated in a program named ALICE. This program integrates mechanical stability analysis through a GIS software taking into account data uncertainty. This method proposes a quantitative classification of landslide hazard and offers a useful tool to gain time and efficiency in hazard mapping. However, an expertise approach is still necessary to finalize the maps. Indeed it is the only way to take into account some influent factors in slope stability such as heterogeneity of the geological formations or effects of anthropic interventions. To go further, the alpine test site (Barcelonnette area, France) is being used to integrate climate change scenarios into ALICE program, and especially their precipitation component with the help of a hydrological model (GARDENIA) and the regional climate model REMO (Jacob, 2001). From a DEM, land-cover map, geology, geotechnical data and so forth the program classifies hazard zones depending on geotechnics and different hydrological contexts varying in time. This communication, realized within the framework of Safeland project, is supported by the European Commission under the 7th Framework Programme for Research and Technological

Transportation of Hazardous Materials Emergency Preparedness Hazards Assessment

Energy Technology Data Exchange (ETDEWEB)

Blanchard, A.

2000-02-28

This report documents the Emergency Preparedness Hazards Assessment (EPHA) for the Transportation of Hazardous Materials (THM) at the Department of Energy (DOE) Savannah River Site (SRS). This hazards assessment is intended to identify and analyze those transportation hazards significant enough to warrant consideration in the SRS Emergency Management Program.

Transportation of Hazardous Materials Emergency Preparedness Hazards Assessment

International Nuclear Information System (INIS)

Blanchard, A.

2000-01-01

This report documents the Emergency Preparedness Hazards Assessment (EPHA) for the Transportation of Hazardous Materials (THM) at the Department of Energy (DOE) Savannah River Site (SRS). This hazards assessment is intended to identify and analyze those transportation hazards significant enough to warrant consideration in the SRS Emergency Management Program

Transportation of hazardous materials emergency preparedness hazards assessment

International Nuclear Information System (INIS)

Blanchard, A.

2000-01-01

This report documents the Emergency Preparedness Hazards Assessment (EPHA) for the Transportation of Hazardous Materials (THM) at the Department of Energy (DOE) Savannah River Site (SRS). This hazards assessment is intended to identify and analyze those transportation hazards significant enough to warrant consideration in the SRS Emergency Management Program

A "Marked Success": Physical Activity at Miss White's School

Science.gov (United States)

Morice, Linda C.

2008-01-01

This article examines the career of Flora White, who operated a school for girls in Concord, Massachusetts (USA) from 1897 to 1914. The school promoted individualised learning and physical activity for young women. Its programme of female exercise and sports ran counter to prevailing scholarly, medical, and popular opinion in the US. White faced…

Hazard function theory for nonstationary natural hazards

Science.gov (United States)

Read, L.; Vogel, R. M.

2015-12-01

Studies from the natural hazards literature indicate that many natural processes, including wind speeds, landslides, wildfires, precipitation, streamflow and earthquakes, show evidence of nonstationary behavior such as trends in magnitudes through time. Traditional probabilistic analysis of natural hazards based on partial duration series (PDS) generally assumes stationarity in the magnitudes and arrivals of events, i.e. that the probability of exceedance is constant through time. Given evidence of trends and the consequent expected growth in devastating impacts from natural hazards across the world, new methods are needed to characterize their probabilistic behavior. The field of hazard function analysis (HFA) is ideally suited to this problem because its primary goal is to describe changes in the exceedance probability of an event over time. HFA is widely used in medicine, manufacturing, actuarial statistics, reliability engineering, economics, and elsewhere. HFA provides a rich theory to relate the natural hazard event series (x) with its failure time series (t), enabling computation of corresponding average return periods and reliabilities associated with nonstationary event series. This work investigates the suitability of HFA to characterize nonstationary natural hazards whose PDS magnitudes are assumed to follow the widely applied Poisson-GP model. We derive a 2-parameter Generalized Pareto hazard model and demonstrate how metrics such as reliability and average return period are impacted by nonstationarity and discuss the implications for planning and design. Our theoretical analysis linking hazard event series x, with corresponding failure time series t, should have application to a wide class of natural hazards.

Hazard function theory for nonstationary natural hazards

Science.gov (United States)

Read, Laura K.; Vogel, Richard M.

2016-04-01

Impact from natural hazards is a shared global problem that causes tremendous loss of life and property, economic cost, and damage to the environment. Increasingly, many natural processes show evidence of nonstationary behavior including wind speeds, landslides, wildfires, precipitation, streamflow, sea levels, and earthquakes. Traditional probabilistic analysis of natural hazards based on peaks over threshold (POT) generally assumes stationarity in the magnitudes and arrivals of events, i.e., that the probability of exceedance of some critical event is constant through time. Given increasing evidence of trends in natural hazards, new methods are needed to characterize their probabilistic behavior. The well-developed field of hazard function analysis (HFA) is ideally suited to this problem because its primary goal is to describe changes in the exceedance probability of an event over time. HFA is widely used in medicine, manufacturing, actuarial statistics, reliability engineering, economics, and elsewhere. HFA provides a rich theory to relate the natural hazard event series (X) with its failure time series (T), enabling computation of corresponding average return periods, risk, and reliabilities associated with nonstationary event series. This work investigates the suitability of HFA to characterize nonstationary natural hazards whose POT magnitudes are assumed to follow the widely applied generalized Pareto model. We derive the hazard function for this case and demonstrate how metrics such as reliability and average return period are impacted by nonstationarity and discuss the implications for planning and design. Our theoretical analysis linking hazard random variable X with corresponding failure time series T should have application to a wide class of natural hazards with opportunities for future extensions.

Progress for the Industry Application External Hazard Analyses Early Demonstration

Energy Technology Data Exchange (ETDEWEB)

Smith, Curtis L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Prescott, Steven [Idaho National Lab. (INL), Idaho Falls, ID (United States); Coleman, Justin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ryan, Emerald [Idaho State Univ., Pocatello, ID (United States); Bhandari, Bishwo [Idaho State Univ., Pocatello, ID (United States); Sludern, Daniel [Idaho State Univ., Pocatello, ID (United States); Pope, Chad [Idaho State Univ., Pocatello, ID (United States); Sampath, Ram [Centroid PIC, Idaho Falls, ID (United States)

2015-09-01

This report describes the current progress and status related to the Industry Application #2 focusing on External Hazards. For this industry application within the Light Water Reactor Sustainability (LWRS) Program Risk-Informed Safety Margin Characterization (RISMC) R&D Pathway, we will create the Risk-Informed Margin Management (RIMM) approach to represent meaningful (i.e., realistic facility representation) event scenarios and consequences by using an advanced 3D facility representation that will evaluate external hazards such as flooding and earthquakes in order to identify, model and analyze the appropriate physics that needs to be included to determine plant vulnerabilities related to external events; manage the communication and interactions between different physics modeling and analysis technologies; and develop the computational infrastructure through tools related to plant representation, scenario depiction, and physics prediction. One of the unique aspects of the RISMC approach is how it couples probabilistic approaches (the scenario) with mechanistic phenomena representation (the physics) through simulation. This simulation-based modeling allows decision makers to focus on a variety of safety, performance, or economic metrics. In this report, we describe the evaluation of various physics toolkits related to flooding representation. Ultimately, we will be coupling the flooding representation with other events such as earthquakes in order to provide coupled physics analysis for scenarios where interactions exist.

Hazards assessment for the Hazardous Waste Storage Facility

International Nuclear Information System (INIS)

Knudsen, J.K.; Calley, M.B.

1994-04-01

This report documents the hazards assessment for the Hazardous Waste Storage Facility (HWSF) located at the Idaho National Engineering Laboratory. The hazards assessment was performed to ensure that this facility complies with DOE and company requirements pertaining to emergency planning and preparedness for operational emergencies. The hazards assessment identifies and analyzes hazards that are significant enough to warrant consideration in a facility's operational emergency management program. The area surrounding HWSF, the buildings and structures at HWSF, and the processes used at HWSF are described in this report. All nonradiological hazardous materials at the HWSF were identified (radiological hazardous materials are not stored at HWSF) and screened against threshold quantities according to DOE Order 5500.3A guidance. Two of the identified hazardous materials exceeded their specified threshold quantity. This report discusses the potential release scenarios and consequences associated with an accidental release for each of the two identified hazardous materials, lead and mercury. Emergency considerations, such as emergency planning zones, emergency classes, protective actions, and emergency action levels, are also discussed based on the analysis of potential consequences. Evaluation of the potential consequences indicated that the highest emergency class for operational emergencies at the HWSF would be a Site Area Emergency

High resolution global flood hazard map from physically-based hydrologic and hydraulic models.

Science.gov (United States)

Begnudelli, L.; Kaheil, Y.; McCollum, J.

2017-12-01

The global flood map published online at http://www.fmglobal.com/research-and-resources/global-flood-map at 90m resolution is being used worldwide to understand flood risk exposure, exercise certain measures of mitigation, and/or transfer the residual risk financially through flood insurance programs. The modeling system is based on a physically-based hydrologic model to simulate river discharges, and 2D shallow-water hydrodynamic model to simulate inundation. The model can be applied to large-scale flood hazard mapping thanks to several solutions that maximize its efficiency and the use of parallel computing. The hydrologic component of the modeling system is the Hillslope River Routing (HRR) hydrologic model. HRR simulates hydrological processes using a Green-Ampt parameterization, and is calibrated against observed discharge data from several publicly-available datasets. For inundation mapping, we use a 2D Finite-Volume Shallow-Water model with wetting/drying. We introduce here a grid Up-Scaling Technique (UST) for hydraulic modeling to perform simulations at higher resolution at global scale with relatively short computational times. A 30m SRTM is now available worldwide along with higher accuracy and/or resolution local Digital Elevation Models (DEMs) in many countries and regions. UST consists of aggregating computational cells, thus forming a coarser grid, while retaining the topographic information from the original full-resolution mesh. The full-resolution topography is used for building relationships between volume and free surface elevation inside cells and computing inter-cell fluxes. This approach almost achieves computational speed typical of the coarse grids while preserving, to a significant extent, the accuracy offered by the much higher resolution available DEM. The simulations are carried out along each river of the network by forcing the hydraulic model with the streamflow hydrographs generated by HRR. Hydrographs are scaled so that the peak

Assessment of volcanic hazards, vulnerability, risk and uncertainty (Invited)

Science.gov (United States)

Sparks, R. S.

2009-12-01

A volcanic hazard is any phenomenon that threatens communities . These hazards include volcanic events like pyroclastic flows, explosions, ash fall and lavas, and secondary effects such as lahars and landslides. Volcanic hazards are described by the physical characteristics of the phenomena, by the assessment of the areas that they are likely to affect and by the magnitude-dependent return period of events. Volcanic hazard maps are generated by mapping past volcanic events and by modelling the hazardous processes. Both these methods have their strengths and limitations and a robust map should use both approaches in combination. Past records, studied through stratigraphy, the distribution of deposits and age dating, are typically incomplete and may be biased. Very significant volcanic hazards, such as surge clouds and volcanic blasts, are not well-preserved in the geological record for example. Models of volcanic processes are very useful to help identify hazardous areas that do not have any geological evidence. They are, however, limited by simplifications and incomplete understanding of the physics. Many practical volcanic hazards mapping tools are also very empirical. Hazards maps are typically abstracted into hazards zones maps, which are some times called threat or risk maps. Their aim is to identify areas at high levels of threat and the boundaries between zones may take account of other factors such as roads, escape routes during evacuation, infrastructure. These boundaries may change with time due to new knowledge on the hazards or changes in volcanic activity levels. Alternatively they may remain static but implications of the zones may change as volcanic activity changes. Zone maps are used for planning purposes and for management of volcanic crises. Volcanic hazards maps are depictions of the likelihood of future volcanic phenomena affecting places and people. Volcanic phenomena are naturally variable, often complex and not fully understood. There are

Rockfall hazard analysis using LiDAR and spatial modeling

Science.gov (United States)

Lan, Hengxing; Martin, C. Derek; Zhou, Chenghu; Lim, Chang Ho

2010-05-01

Rockfalls have been significant geohazards along the Canadian Class 1 Railways (CN Rail and CP Rail) since their construction in the late 1800s. These rockfalls cause damage to infrastructure, interruption of business, and environmental impacts, and their occurrence varies both spatially and temporally. The proactive management of these rockfall hazards requires enabling technologies. This paper discusses a hazard assessment strategy for rockfalls along a section of a Canadian railway using LiDAR and spatial modeling. LiDAR provides accurate topographical information of the source area of rockfalls and along their paths. Spatial modeling was conducted using Rockfall Analyst, a three dimensional extension to GIS, to determine the characteristics of the rockfalls in terms of travel distance, velocity and energy. Historical rockfall records were used to calibrate the physical characteristics of the rockfall processes. The results based on a high-resolution digital elevation model from a LiDAR dataset were compared with those based on a coarse digital elevation model. A comprehensive methodology for rockfall hazard assessment is proposed which takes into account the characteristics of source areas, the physical processes of rockfalls and the spatial attribution of their frequency and energy.

Problems of safety and risk in physical education

Directory of Open Access Journals (Sweden)

Robert Podstawski

2015-10-01

Full Text Available Purpose: One of the methodology issues in Physical Education is providing children with safety. The purpose of this work is to present basic concepts of safety at Physical Education classes. Material & Methods: The issues connected with safety at classes of Physical Education have been discussed in the subsections, each of which focuses on different concepts such as: legal safety regulations, causes of hazards, theoretical models of preventing hazards at P.E. classes, nutrition programs related to exercise’s fulfillment, prevention of heat disorders and dehydration. Results: According to experts’ opinion, the causes of safety hazards at P.E. classes can be divided into three groups: caused by instructor, caused by a student, and finally hazards technical in nature. The number of accidents during P.E. classes is still substantial, and among most common hazards there are the following: fractures of upper and lower limbs, dislocations, contusions, tendonitis, muscle tear and cuts. Curiously, boys experience such injuries more frequently than girls. Conclusions: Even though safety rules at Physical Education classes are defined by specific regulations, children’s absolute safety is never guaranteed. In order to diminish the number of misadventures, instructor is obliged not only to adhere to the norms but also to teach children to safety rules.

Kauai Test Facility hazards assessment document

Energy Technology Data Exchange (ETDEWEB)

Swihart, A

1995-05-01

The Department of Energy Order 55003A requires facility-specific hazards assessment be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with the Kauai Test Facility, Barking Sands, Kauai, Hawaii. The Kauai Test Facility`s chemical and radiological inventories were screened according to potential airborne impact to onsite and offsite individuals. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distance to the Early Severe Health Effects threshold is 4.2 kilometers. The highest emergency classification is a General Emergency at the {open_quotes}Main Complex{close_quotes} and a Site Area Emergency at the Kokole Point Launch Site. The Emergency Planning Zone for the {open_quotes}Main Complex{close_quotes} is 5 kilometers. The Emergency Planning Zone for the Kokole Point Launch Site is the Pacific Missile Range Facility`s site boundary.

Kauai Test Facility hazards assessment document

International Nuclear Information System (INIS)

Swihart, A.

1995-05-01

The Department of Energy Order 55003A requires facility-specific hazards assessment be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with the Kauai Test Facility, Barking Sands, Kauai, Hawaii. The Kauai Test Facility's chemical and radiological inventories were screened according to potential airborne impact to onsite and offsite individuals. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distance to the Early Severe Health Effects threshold is 4.2 kilometers. The highest emergency classification is a General Emergency at the open-quotes Main Complexclose quotes and a Site Area Emergency at the Kokole Point Launch Site. The Emergency Planning Zone for the open-quotes Main Complexclose quotes is 5 kilometers. The Emergency Planning Zone for the Kokole Point Launch Site is the Pacific Missile Range Facility's site boundary

Simulation Technology Laboratory Building 970 hazards assessment document

International Nuclear Information System (INIS)

Wood, C.L.; Starr, M.D.

1994-11-01

The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with the Simulation Technology Laboratory, Building 970. The entire inventory was screened according to the potential airborne impact to onsite and offsite individuals. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distances at which a postulated facility event will produce consequences exceeding the ERPG-2 and Early Severe Health Effects thresholds are 78 and 46 meters, respectively. The highest emergency classification is a Site Area Emergency. The Emergency Planning Zone is 100 meters

Road Nail: Experimental Solar Powered Intelligent Road Marking System

Science.gov (United States)

Samardžija, Dragan; Teslić, Nikola; Todorović, Branislav M.; Kovač, Erne; Isailović, Đorđe; Miladinović, Bojan

2012-03-01

Driving in low visibility conditions (night time, fog or heavy precipitation) is particularly challenging task with an increased probability of traffic accidents and possible injuries. Road Nail is a solar powered intelligent road marking system of wirelessly networked signaling devices that improve driver safety in low visibility conditions along hazardous roadways. Nails or signaling devices are autonomous nodes with capability to accumulate energy, exchange wireless messages, detect approaching vehicles and emit signalization light. We have built an experimental test-bed that consists of 20 nodes and a cellular gateway. Implementation details of the above system, including extensive measurements and performance evaluations in realistic field deployments are presented. A novel distributed network topology discovery scheme is proposed which integrates both sensor and wireless communication aspects, where nodes act autonomously. Finally, integration of the Road Nail system with the cellular network and the Internet is described.

Assessment of radiological and non-radiological hazards in the nuclear fuel cycle - The Indian experience

International Nuclear Information System (INIS)

Krishnamony, S.; Gopinath, D.V.

1996-01-01

Design and operational aspects of nuclear fuel cycle facilities have several features that distinguish them from nuclear power plants. These are related to (i) the nature of operations which are chiefly mining, metallurgical and chemical; (ii) the nature and type of radio-active materials handled, their specific activities and inventories; and (iii) the physical and chemical processes involved and the associated containment provisions. Generally the radioactive materials are present in an already highly dispersible or mobile form, in the form of solutions, slurries and powders, often associated with a wide variety of reactive and corrosive chemicals. There are further marked differences between the front-end and back-end of the fuel cycle. Whereas the front-end is characterized by the presence of large quantities of low specific activity naturally occurring radioactive materials, the back-end is characterized by high specific activities and concentrations of fission products and actinides. Radioactive characteristics of waste arisings are also different in different phases of the nuclear fuel cycle. Potential for internal exposure in the occupational environment is another distinguishing feature as compared with the more common designs of nuclear power reactors. Potential for accidents, their phenomenology and the resulting consequences are also markedly different in fuel cycle operations. The non-radiological hazards in fuel cycle operations are also of significance, since the operations are mostly mining, metallurgical and chemical in nature. These aspects are examined and evaluated in this paper, based on the Indian experience. (author). 12 refs, 10 tabs

Sandia Administrative Micrographics Facility, Building 802: Hazards assessment document

International Nuclear Information System (INIS)

Swihart, A.

1994-12-01

The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with the Sandia Administrative Micrographics Facility, Building 802. The entire inventory was screened according to the potential airborne impact to onsite and offsite individuals. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distance at which a postulated facility event will produce consequences exceeding the Early Severe Health Effects threshold is 33 meters. The highest emergency classification is a Site Area Emergency. The Emergency Planning Zone is 75 meters

Potential biological hazard of importance for HACCP plans in fresh fish processing

Directory of Open Access Journals (Sweden)

Baltić Milan Ž.

2009-01-01

Full Text Available The Hazard Analysis and Critical Control Point (HACCP system is scientifically based and focused on problem prevention in order to assure the produced food products are safe to consume. Prerequisite programs such as GMP (Good Manufacturing Practices, GHP (Good Hygienic Practices are an essential foundation for the development and implementation of successful HACCP plans. One of the preliminary tasks in the development of HACCP plan is to conduct a hazard analysis. The process of conducting a hazard analysis involves two stages. The first is hazard identification and the second stage is the HACCP team decision which potential hazards must be addressed in the HACCP plan. By definition, the HACCP concept covers all types of potential food safety hazards: biological, chemical and physical, whether they are naturally occurring in the food, contributed by the environment or generated by a mistake in the manufacturing process. In raw fish processing, potential significant biological hazards which are reasonably likely to cause illness of humans are parasites (Trematodae, Nematodae, Cestodae, bacteria (Salmonella, E. coli, Vibrio parahemolyticus, Vibrio vulnificus, Listeria monocytogenes, Clostridium botulinum, Staphyloccocus aureus, viruses (Norwalk virus, Entero virusesi, Hepatitis A, Rotovirus and bio-toxins. Upon completion of hazard analysis, any measure(s that are used to control the hazard(s should be described.

46 CFR 185.602 - Hull markings.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Hull markings. 185.602 Section 185.602 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) OPERATIONS Markings Required § 185.602 Hull markings. (a) Each vessel must be marked as required by part 67...

Mark-recapture using tetracycline and genetics reveal record-high bear density

Science.gov (United States)

Peacock, E.; Titus, K.; Garshelis, D.L.; Peacock, M.M.; Kuc, M.

2011-01-01

We used tetracycline biomarking, augmented with genetic methods to estimate the size of an American black bear (Ursus americanus) population on an island in Southeast Alaska. We marked 132 and 189 bears that consumed remote, tetracycline-laced baits in 2 different years, respectively, and observed 39 marks in 692 bone samples subsequently collected from hunters. We genetically analyzed hair samples from bait sites to determine the sex of marked bears, facilitating derivation of sex-specific population estimates. We obtained harvest samples from beyond the study area to correct for emigration. We estimated a density of 155 independent bears/100 km2, which is equivalent to the highest recorded for this species. This high density appears to be maintained by abundant, accessible natural food. Our population estimate (approx. 1,000 bears) could be used as a baseline and to set hunting quotas. The refined biomarking method for abundance estimation is a useful alternative where physical captures or DNA-based estimates are precluded by cost or logistics. Copyright ?? 2011 The Wildlife Society.

Volcanic ash hazards and aviation risk: Chapter 4

Science.gov (United States)

Guffanti, Marianne C.; Tupper, Andrew C.

2015-01-01

The risks to safe and efficient air travel from volcanic-ash hazards are well documented and widely recognized. Under the aegis of the International Civil Aviation Organization, globally coordinated mitigation procedures are in place to report explosive eruptions, detect airborne ash clouds and forecast their expected movement, and issue specialized messages to warn aircraft away from hazardous airspace. This mitigation framework is based on the integration of scientific and technical capabilities worldwide in volcanology, meteorology, and atmospheric physics and chemistry. The 2010 eruption of Eyjafjallajökull volcano in Iceland, which led to a nearly week-long shutdown of air travel into and out of Europe, has prompted the aviation industry, regulators, and scientists to work more closely together to improve how hazardous airspace is defined and communicated. Volcanic ash will continue to threaten aviation and scientific research will continue to influence the risk-mitigation framework.

Mark Kostabi soovib muuta inimesi õnnelikumaks / Kalev Mark Kostabi

Index Scriptorium Estoniae

Kostabi, Kalev Mark, 1960-

2008-01-01

Kalev Mark Kostabi oma sisekujunduslikest eelistustest, ameeriklaste ja itaallaste kodude sisekujunduse erinevustest, kunstist kui ruumikujunduse ühest osast, oma New Yorgi ja Rooma korterite kujundusest

Pramana – Journal of Physics | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Pramana – Journal of Physics. Mark Scarcella. Articles written in Pramana – Journal of Physics. Volume 79 Issue 5 November 2012 pp 1309-1312 Poster Presentations. Triggering on hadronic tau decays: ATLAS meets the challenge · Mark Scarcella on behalf of the ATLAS Collaboration · More Details ...

27 CFR 28.193 - Export marks.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Export marks. 28.193... Drawback Filing of Notice and Removal § 28.193 Export marks. In addition to the marks and brands required... chapter, the exporter shall mark the word “Export” on the Government side of each case or Government head...

27 CFR 28.103 - Export marks.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Export marks. 28.103... Manufacturing Bonded Warehouse § 28.103 Export marks. (a) General. In addition to the marks and brands required... provisions of part 19 of this chapter, the proprietor shall mark the word “Export” on the Government side of...

27 CFR 28.144 - Export marks.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Export marks. 28.144... § 28.144 Export marks. (a) General Requirement. In addition to the marks and brands required to be... brewer shall mark the word “Export” on each container or case of beer, or the words “Beer concentrate for...

27 CFR 28.154 - Export marks.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Export marks. 28.154..., for Exportation or Transfer to a Foreign-Trade Zone § 28.154 Export marks. In addition to the marks... provisions of part 19 of this chapter, the proprietor shall mark the word “Export” on the Government side of...

Hazardous and toxic waste management in Botswana: practices and challenges.

Science.gov (United States)

Mmereki, Daniel; Li, Baizhan; Meng, Liu

2014-12-01

Hazardous and toxic waste is a complex waste category because of its inherent chemical and physical characteristics. It demands for environmentally sound technologies and know-how as well as clean technologies that simultaneously manage and dispose it in an environmentally friendly way. Nevertheless, Botswana lacks a system covering all the critical steps from importation to final disposal or processing of hazardous and toxic waste owing to limited follow-up of the sources and types of hazardous and toxic waste, lack of modern and specialised treatment/disposal facilities, technical know-how, technically skilled manpower, funds and capabilities of local institutions to take lead in waste management. Therefore, because of a lack of an integrated system, there are challenges such as lack of cooperation among all the stakeholders about the safe management of hazardous and toxic waste. Furthermore, Botswana does not have a systematic regulatory framework regarding monitoring and hazardous and toxic waste management. In addition to the absence of a systematic regulatory framework, inadequate public awareness and dissemination of information about hazardous and toxic waste management, slower progress to phase-out persistent and bio-accumulative waste, and lack of reliable and accurate information on hazardous and toxic waste generation, sources and composition have caused critical challenges to effective hazardous and toxic waste management. It is, therefore, important to examine the status of hazardous and toxic waste as a waste stream in Botswana. By default; this mini-review article presents an overview of the current status of hazardous and toxic waste management and introduces the main challenges in hazardous and toxic waste management. Moreover, the article proposes the best applicable strategies to achieve effective hazardous and toxic waste management in the future. © The Author(s) 2014.

1L Mark-IV Target Design Review

Energy Technology Data Exchange (ETDEWEB)

Koehler, Paul E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-11-16

This presentation includes General Design Considerations; Current (Mark-III) Lower Tier; Mark-III Upper Tier; Performance Metrics; General Improvements for Material Science; General Improvements for Nuclear Science; Improving FOM for Nuclear Science; General Design Considerations Summary; Design Optimization Studies; Expected Mark-IV Performance: Material Science; Expected Mark-IV Performance: Nuclear Science (Disk); Mark IV Enables Much Wider Range of Nuclear-Science FOM Gains than Mark III; Mark-IV Performance Summary; Rod or Disk? Center or Real FOV?; and Project Cost and Schedule.

The KULTURisk Regional Risk Assessment methodology for water-related natural hazards - Part 1: Physical-environmental assessment

Science.gov (United States)

Ronco, P.; Gallina, V.; Torresan, S.; Zabeo, A.; Semenzin, E.; Critto, A.; Marcomini, A.

2014-07-01

In recent years, the frequency of catastrophes induced by natural hazard has increased and flood events in particular have been recognized as one of the most threatening water-related disasters. Severe floods have occurred in Europe over the last decade causing loss of life, displacement of people and heavy economic losses. Flood disasters are growing as a consequence of many factors, both climatic and non-climatic. Indeed, the current increase of water-related disasters can be mainly attributed to the increase of exposure (increase elements potentially at risk in floodplains area) and vulnerability (i.e. economic, social, geographic, cultural, and physical/environmental characteristics of the exposure). Besides these factors, the strong effect of climate change is projected to radically modify the usual pattern of the hydrological cycle by intensifying the frequency and severity of flood events both at local, regional and global scale. Within this context, it becomes urgent and dramatically relevant the need of promoting and developing effective and pro-active strategies, tools and actions which allow to assess and (possibly) to reduce the flood risks that threats different relevant receptors. Several methodologies to assess the risk posed by water-related natural hazards have been proposed so far, but very few of them can be adopted to implement the last European Flood Directive (FD). The present study is intended to introduce and present a state-of-the-art Regional Risk Assessment (RRA) methodology to evaluate the benefits of risk prevention in terms of reduced environmental risks due to floods. The methodology, developed within the recently phased out FP7-KULTURisk Project (Knowledge-based approach to develop a cULTUre of Risk prevention - KR) is flexible and can be adapted to different case studies (i.e. large rivers, alpine/mountain catchments, urban areas and coastal areas) and spatial scales (i.e. from the large river to the urban scale). The FD compliant

Changing Context of Trade Mark Protection in India: A Review of the Trade Marks Act, 1999

OpenAIRE

Pathak, Akhileshwar

2004-01-01

With liberalisation and globalisation of the Indian economy, it has become possible for anyone to get into production and services in most of the sectors. This has led to rampant misuse and appropriation of trade marks. In an insulated economy, with monopoly markets, law protecting trade marks had a limited role. In the changed context, however, trade mark law will be a field of much interest for academics and practitioners. Towards this, the paper explores the formation of trade mark law in ...

Modeling the Qualitative Relationship among Risks Associated with Occupational and Workplace Hazards in Seaport Environments: the Case of Apapa Port, Nigeria

Directory of Open Access Journals (Sweden)

Nwokedi Theophilus C

2017-01-01

Full Text Available The aim of the research is to establish the quantitative relationship and impacts of risks associated with various categories of occupational and workplace hazards in the Nigerian seaports. It was carried out by obtaining time series statistical data of 7 years from hazard identification and risk assessment report of Nigerian Ports Authority (NPA Apapa, western port headquarters. The variables considered are the associated risks of various types of occupational and workplace hazards to which seaport workers were exposed from 2009-2014. The overall level of associated risks of occupational and workplace hazards represent the cumulative of various hazards and were treated as the dependent variable ‘Y’. The exposures to the risks of mechanical hazards, ergonomic hazards, physical hazards, noise/environmental hazards were symbolized as X1, X2, X3, and X4 respectively and treated as independent variables. The method of multiple regression analysis was used to analyze the time series data. T-test was used to test the hypotheses. It was found that risks associated to mechanical hazard, ergonomic hazards, noise/vibration hazard, physical hazards, all have significant impact on the overall level of risk of exposure to occupational and workplace hazards in Nigerian seaport environment. It was recommended that proactive investment in safety inspective and management system is needed to limit the level of exposure of seaport staff to occupational hazards.

Hazards and hazard combinations relevant for the safety of nuclear power plants

Science.gov (United States)

Decker, Kurt; Brinkman, Hans; Raimond, Emmanuel

2017-04-01

The potential of the contemporaneous impact of different, yet causally related, hazardous events and event cascades on nuclear power plants is a major contributor to the overall risk of nuclear installations. In the aftermath of the Fukushima accident, which was caused by a combination of severe ground shaking by an earthquake, an earthquake-triggered tsunami and the disruption of the plants from the electrical grid by a seismically induced landslide, hazard combinations and hazard cascades moved into the focus of nuclear safety research. We therefore developed an exhaustive list of external hazards and hazard combinations which pose potential threats to nuclear installations in the framework of the European project ASAMPSAE (Advanced Safety Assessment: Extended PSA). The project gathers 31 partners from Europe, North Amerika and Japan. The list comprises of exhaustive lists of natural hazards, external man-made hazards, and a cross-correlation matrix of these hazards. The hazard list is regarded comprehensive by including all types of hazards that were previously cited in documents by IAEA, the Western European Nuclear Regulators Association (WENRA), and others. 73 natural hazards and 24 man-made external hazards are included. Natural hazards are grouped into seismotectonic hazards, flooding and hydrological hazards, extreme values of meteorological phenomena, rare meteorological phenomena, biological hazards / infestation, geological hazards, and forest fire / wild fire. The list of external man-made hazards includes industry accidents, military accidents, transportation accidents, pipeline accidents and other man-made external events. The large number of different hazards results in the extremely large number of 5.151 theoretically possible hazard combinations (not considering hazard cascades). In principle all of these combinations are possible to occur by random coincidence except for 82 hazard combinations that - depending on the time scale - are mutually

Hazardous Waste

Science.gov (United States)

... chemicals can still harm human health and the environment. When you throw these substances away, they become hazardous waste. Some hazardous wastes come from products in our homes. Our garbage can include such hazardous wastes as old batteries, bug spray cans and paint thinner. U.S. residents ...

Experimental applications for the MARK-1 and MARK-1A pulsed ionizing radiation detection systems. Volume 3

International Nuclear Information System (INIS)

Harker, Y.D.; Lawrence, R.S.; Yoon, W.Y.; Lones, J.L.

1993-12-01

This report is the third volume in a three volume set describing the MARK series of pulsed ionizing radiation detection systems. This volume describes the MARK-1A detection system, compares it with the MARK-1 system, and describes the experimental testing of the detection systems. Volume 1 of this set presents the technical specifications for the MARK-1 detection system. Volume 2 is an operations manual specifically for the MARK-1 system, but it generally applies to the MARK-1A system as well. These detection systems operate remotely and detect photon radiation from a single or a multiple pulsed source. They contain multiple detector (eight in the MARK-1 and ten in the MARK-1A) for determination of does and incident photon effective energy. The multiple detector arrangement, having different detector sizes and shield thicknesses, provides the capability of determining the effective photon energy of the radiation spectrum. Dose measurements using these units are consistent with TLD measurements. The detection range is from 3 nanorads to 90 microrads per source burst; the response is linear over that range. Three units were built and are ready for field deployment

Augmented marked graphs

CERN Document Server

Cheung, King Sing

2014-01-01

Petri nets are a formal and theoretically rich model for the modelling and analysis of systems. A subclass of Petri nets, augmented marked graphs possess a structure that is especially desirable for the modelling and analysis of systems with concurrent processes and shared resources.This monograph consists of three parts: Part I provides the conceptual background for readers who have no prior knowledge on Petri nets; Part II elaborates the theory of augmented marked graphs; finally, Part III discusses the application to system integration. The book is suitable as a first self-contained volume

Court presentation of bite mark evidence.

Science.gov (United States)

Drinnan, A J; Melton, M J

1985-12-01

The uniqueness of an individual's bite mark is generally accepted. The use of bite mark analysis to identify or exclude those suspected of crimes is now a well established activity in forensic dentistry. Although the techniques for evaluating bite mark evidence are extremely sophisticated, it is important that the courtroom presentation of such evidence should be as simple as possible and be directed towards those who must judge it. Dentists likely to be involved in the courtroom presentation of bite mark evidence should: be certain that their local law enforcement personnel are frequently updated on the techniques to be used for producing the optimum evidence needed to evaluate bite marks; become acquainted with the current techniques of evaluating bite mark evidence and understand their difficulties and pitfalls; meet with the lawyers (prosecution or defence) before a courtroom appearance, briefing them on the significance of the particular findings; prepare clear and easily understandable visual aids to present to the court the techniques used in the analysis and the bases for the conclusion reached; and offer conclusions derived from the bite mark investigation.

Hazard perception in traffic. [previously knows as: Hazard perception.

NARCIS (Netherlands)

2008-01-01

Hazard perception is an essential part of the driving task. There are clear indications that insufficient skills in perceiving hazards play an important role in the occurrence of crashes, especially those involving novice drivers. Proper hazard perception not only consists of scanning and perceiving

78 FR 4324 - Occupational Exposure to Hazardous Chemicals in Laboratories (Non-Mandatory Appendix); Technical...

Science.gov (United States)

2013-01-22

... variety of physical and chemical reasons, reaction scale-ups pose special risks, which merit additional.... Engineering controls, such as chemical hoods, physically separate the employee from the hazard. Administrative..., engineering controls and apparel; (d) Laboratory equipment; (e) Safety equipment; (f) Chemical management; (g...

Assessing natural hazard risk using images and data

Science.gov (United States)

Mccullough, H. L.; Dunbar, P. K.; Varner, J. D.; Mungov, G.

2012-12-01

Photographs and other visual media provide valuable pre- and post-event data for natural hazard assessment. Scientific research, mitigation, and forecasting rely on visual data for risk analysis, inundation mapping and historic records. Instrumental data only reveal a portion of the whole story; photographs explicitly illustrate the physical and societal impacts from the event. Visual data is rapidly increasing as the availability of portable high resolution cameras and video recorders becomes more attainable. Incorporating these data into archives ensures a more complete historical account of events. Integrating natural hazards data, such as tsunami, earthquake and volcanic eruption events, socio-economic information, and tsunami deposits and runups along with images and photographs enhances event comprehension. Global historic databases at NOAA's National Geophysical Data Center (NGDC) consolidate these data, providing the user with easy access to a network of information. NGDC's Natural Hazards Image Database (ngdc.noaa.gov/hazardimages) was recently improved to provide a more efficient and dynamic user interface. It uses the Google Maps API and Keyhole Markup Language (KML) to provide geographic context to the images and events. Descriptive tags, or keywords, have been applied to each image, enabling easier navigation and discovery. In addition, the Natural Hazards Map Viewer (maps.ngdc.noaa.gov/viewers/hazards) provides the ability to search and browse data layers on a Mercator-projection globe with a variety of map backgrounds. This combination of features creates a simple and effective way to enhance our understanding of hazard events and risks using imagery.

The development of the globally harmonized system (GHS) of classification and labelling of hazardous chemicals

International Nuclear Information System (INIS)

Winder, Chris; Azzi, Rola; Wagner, Drew

2005-01-01

The hazards of chemicals can be classified using classification criteria that are based on physical, chemical and ecotoxicological endpoints. These criteria may be developed be iteratively, based on scientific or regulatory processes. A number of national and international schemes have been developed over the past 50 years, and some, such as the UN Dangerous Goods system or the EC system for hazardous substances, are in widespread use. However, the unnecessarily complicated multiplicity of existing hazard classifications created much unnecessary confusion at the user level, and a recommendation was made at the 1992 Rio Earth summit to develop a globally harmonized chemical hazard classification and compatible labelling system, including material safety data sheets and easily understandable symbols, that could be used for manufacture, transport, use and disposal of chemical substances. This became the globally harmonized system for the Classification and Labelling of Chemicals (GHS). The developmental phase of the GHS is largely complete. Consistent criteria for categorising chemicals according to their toxic, physical, chemical and ecological hazards are now available. Consistent hazard communication tools such as labelling and material safety data sheets are also close to finalisation. The next phase is implementation of the GHS. The Intergovernmental Forum for Chemical Safety recommends that all countries implement the GHS as soon as possible with a view to have the system fully operational by 2008. When the GHS is in place, the world will finally have one system for classification of chemical hazards

Nuclear particle track-etched anti-bogus mark

International Nuclear Information System (INIS)

He Xiangming; Yan Yushun; Zhang Quanrong

2003-01-01

Nuclear particle track-etched anti-bogus mark is a new type of forgery-proof product after engraving gravure printing, thermocolour, fluorescence, laser hologram and metal concealed anti-bogus mark. The mark is manufactured by intricate high technology and the state strictly controlled sensitive nuclear facilities to ensure the mark not to be copied. The pattern of the mark is specially characterized by permeability of liquid to be discriminated from forgery. The genuine mark can be distinguished from sham one by transparent liquid (e.g. water), colorful pen and chemical reagent. The mark has passed the official examination of health safety. It is no danger of nuclear irradiation. (author)

High efficiency metal marking with CO2 laser and glass marking with excimer laser

DEFF Research Database (Denmark)

Bastue, Jens; Olsen, Flemmming Ove

1997-01-01

with a thoroughly tested ray-tracing model is presented and compared with experimental results. Special emphasis is put on two different applications namely marking in metal with TEA-CO2 laser and marking in glass with excimer laser. The results are evaluated on the basis of the achievable energy enhancement......Today, mask based laser materials processing and especially marking is widely used. However, the energy efficiency in such processes is very low [1].This paper gives a review of the results, that may be obtained using the energy enhancing technique [1]. Results of simulations performed...

Workplace Hazards Faced by Nursing Assistants in the United States: A Focused Literature Review.

Science.gov (United States)

Walton, AnnMarie Lee; Rogers, Bonnie

2017-05-19

Nursing assistants (NAs) make up a large share of the healthcare provider workforce and their numbers are expected to grow. NAs are predominantly women who earn a low wage and report financial, work, and family demands. Working as a NA is hazardous; this manuscript specifically examines the biological/infectious, chemical, enviromechanical, physical and psychosocial hazards that appear in the literature to date. A focused search strategy was used to review literature about hazards that fell into each of the five aforementioned domains. While some hazards that were documented were clear, such as exposure to influenza because of close contact with patients (biological/infectious), or exposure to hazardous drugs (chemical), literature was limited. The majority of the literature we reviewed fell into the domain of psychosocial hazards and centered on stress from workplace organization issues (such as mandatory overtime, lack of managerial support, and feeling rushed). More research is needed to understand which hazards NAs identify as most concerning and tailored interventions are needed for risk mitigation.

Fire Hazard Analysis for the Cold Neutron Source System

Energy Technology Data Exchange (ETDEWEB)

Choi, Jung Won; Kim, Young Ki; Wu, Sang Ik; Park, Young Cheol; Kim, Bong Soo; Kang, Mee Jin; Oh, Sung Wook

2006-04-15

As the Cold Neutron Source System for its installation in HANARO has been designing, the fire hazard analysis upon the CNS system becomes required under No. 2003-20 of the MOST notice, Technical Standard about the Fire Hazard Analysis. As a moderator, the strongly flammable hydrogen is filled in the hydrogen system of CNS. Against the fire or explosion in the reactor hall, accordingly, the physical damage on the reactor safety system should be evaluated in order to reflect the safety protection precaution in the design of CNS system. For the purpose of fire hazard analysis, the accident scenarios were divided into three: hydrogen leak during the hydrogen charging in the system, hydrogen leak during the normal operation of CNS, explosion of hydrogen buffer tank by the external fire. The analysis results can be summarized as follows. First, there is no physical damage threatening the reactor safety system although all hydrogen gas came out of the system then ignited as a jet fire. Second, since the CNS equipment island (CEI) is located enough away from the reactor, no physical damage caused by the buffer tank explosion is on the reactor in terms of the overpressure except the flying debris so that the light two-hour fireproof panel is installed in an one side of hydrogen buffer tank. Third, there are a few combustibles on the second floor of CEI so that the fire cannot be propagated to other areas in the reactor hall; however, the light two-hour fireproof panel will be built on the second floor against the external or internal fire so as to play the role of a fire protection area.

Fire Hazard Analysis for the Cold Neutron Source System

International Nuclear Information System (INIS)

Choi, Jung Won; Kim, Young Ki; Wu, Sang Ik; Park, Young Cheol; Kim, Bong Soo; Kang, Mee Jin; Oh, Sung Wook

2006-04-01

As the Cold Neutron Source System for its installation in HANARO has been designing, the fire hazard analysis upon the CNS system becomes required under No. 2003-20 of the MOST notice, Technical Standard about the Fire Hazard Analysis. As a moderator, the strongly flammable hydrogen is filled in the hydrogen system of CNS. Against the fire or explosion in the reactor hall, accordingly, the physical damage on the reactor safety system should be evaluated in order to reflect the safety protection precaution in the design of CNS system. For the purpose of fire hazard analysis, the accident scenarios were divided into three: hydrogen leak during the hydrogen charging in the system, hydrogen leak during the normal operation of CNS, explosion of hydrogen buffer tank by the external fire. The analysis results can be summarized as follows. First, there is no physical damage threatening the reactor safety system although all hydrogen gas came out of the system then ignited as a jet fire. Second, since the CNS equipment island (CEI) is located enough away from the reactor, no physical damage caused by the buffer tank explosion is on the reactor in terms of the overpressure except the flying debris so that the light two-hour fireproof panel is installed in an one side of hydrogen buffer tank. Third, there are a few combustibles on the second floor of CEI so that the fire cannot be propagated to other areas in the reactor hall; however, the light two-hour fireproof panel will be built on the second floor against the external or internal fire so as to play the role of a fire protection area

Glass Formulation and Fabrication Laboratory, Building 864, Hazards assessment document

Energy Technology Data Exchange (ETDEWEB)

Banda, Z.; Wood, C.L.

1995-08-01

The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with the Glass Formulation and Fabrication Laboratory, Building 864. The entire inventory was screened according to the potential airborne impact to onsite and offsite individuals. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distances at which a postulated facility event will produce consequences exceeding the ERPG-2 threshold is 96 meters. The highest emergency classification is a Site Area Emergency. The Emergency Planning Zone is 100 meters.

Identification of Potential Hazard using Hazard Identification and Risk Assessment

Science.gov (United States)

Sari, R. M.; Syahputri, K.; Rizkya, I.; Siregar, I.

2017-03-01

This research was conducted in the paper production’s company. These Paper products will be used as a cigarette paper. Along in the production’s process, Company provides the machines and equipment that operated by workers. During the operations, all workers may potentially injured. It known as a potential hazard. Hazard identification and risk assessment is one part of a safety and health program in the stage of risk management. This is very important as part of efforts to prevent occupational injuries and diseases resulting from work. This research is experiencing a problem that is not the identification of potential hazards and risks that would be faced by workers during the running production process. The purpose of this study was to identify the potential hazards by using hazard identification and risk assessment methods. Risk assessment is done using severity criteria and the probability of an accident. According to the research there are 23 potential hazard that occurs with varying severity and probability. Then made the determination Risk Assessment Code (RAC) for each potential hazard, and gained 3 extreme risks, 10 high risks, 6 medium risks and 3 low risks. We have successfully identified potential hazard using RAC.

[Diagnostic imaging and radiation hazards].

Science.gov (United States)

Claudon, Michel; Guillaume, Luc

2015-01-01

For the last 20 years, the exposure of the population to medical radiation has been increased by 600%, mainly due to the extension of new imaging modalities such as CT or interventional radiology. The risk for radio-induced hazards is especially marked for children, because of the high sensivity of tissues to radiation especially during the first decade of the life. Two main ways allow to better control and reduce the mean effective dose per patient in diagnostic imaging: the introduction of recent technical improvement (i.e. low dose CT scans using iterative reconstruction algorithms, low dose technique for pediatric spine), and the substitution to non-radiating techniques such as ultrasound and MRI. The French National institute of Radioprotection and Nuclear Safety periodically publishes dose reference levels for conventional films and CT examinations, for both adults and pediatric patients. A close relationship between clinicians and radiologists remains essential for a better appreciation of the risk/benefit ratio of each individual examination using X-Rays.

Health hazards to children in agriculture.

Science.gov (United States)

Wilk, V A

1993-09-01

Children comprise a significant portion of the agricultural workforce and are exposed to many workplace hazards, including farm machinery, pesticides, poor field sanitation, unsafe transportation, and fatigue from doing physically demanding work for long periods. Migrant farmworker children face the additional hazard of substandard or nonexistent housing in the fields. Children account for a disproportionate share of agricultural workplace fatalities and disabling injuries, with more than 300 deaths and 27,000 injuries per year. The most common cause of fatal and nonfatal injury among children in agriculture is farm machinery, with tractors accounting for the greatest number. Remedies to the problems of child labor must take into account family economics and the need for child care. Labor law reform and rigorous enforcement of existing laws and of workplace health and safety requirements are vital to better protect the children and adults working in agriculture.

The 'new' Radiation Protection Ordinance - marking the difference between application of 'radioactive substances in medical research' (Section 41 StrlschV) and 'radioactive substances or ionizing radiation in medicine and dental medicine' (Section 42 StrlschV)

International Nuclear Information System (INIS)

Roedern, P.

1983-01-01

The main differences in the provisions are to be found under the following aspects: - Observation of dose limits; - Necessity of physical radiation protection surveillance; - Obligation to apply for approval in individual cases; - Selection of test persons/patients; - Scope of conditions governing approval; - Obligation to inform about hazards. The unambiguous definition of procedures and purposes allowed in the field of medical research, and of those in the field of medical therapy (including dental medicine) is of crucial importance, due to its significance with regard to radiation protection, civil law and penal law. Marking the limits between these two fields subject to supervision is a precondition allowing the proper application of relevant laws in the field of use and handling of radioactive substances or ionizing radiation for medical purposes. (orig./HSCH) [de

A life cycle hazard assessment (LCHA) framework to address fire hazards at the wildland-urban interface

Science.gov (United States)

Lindquist, Eric; Pierce, Jen; Wuerzer, Thomas; Glenn, Nancy; Dialani, Jijay; Gibble, Katie; Frazier, Tim; Strand, Eva

2015-04-01

The stages of planning for and responding to natural hazards, such as wildfires and related events, are often conducted as discrete (and often not connected) efforts. Disaster response often takes precedence, exhausting agency and stakeholder resources, and the planning stages are conducted by different agencies or entities with different and often competing agendas and jurisdictions. The result is that evaluation after a disaster can be minimal or even non-existent as resources are expended and interest moves on to the next event. Natural disasters and hazards, however, have a tendency to cascade and multiply: wildfires impact the vulnerability of hillslopes, for example, which may result in landslides, flooding and debris flows long after the initial event has occurred. Connecting decisions across multiple events and time scales is ignored, yet these connections could lead to better policy making at all stages of disaster risk reduction. Considering this situation, we present an adapted life cycle analysis (LCA) approach to examine fire-related hazards at the Wildland-Urban Interface in the American West. The LCHA focuses on the temporal integration of : 1) the 'pre-fire' set of physical conditions (e.g. fuel loads) and human conditions (e.g. hazard awareness), 2) the 'fire event', focusing on computational analysis of the communication patterns and responsibility for response to the event, and 3) the 'post-event' analysis of the landscape susceptibility to fire-related debris flows. The approach of the LCHA follows other models used by governmental agencies to prepare for disasters through 1) preparation and prevention, 2) response and 3) recovery. As an overlay are the diverse agencies and policies associated with these stages and their respective resource and management decisions over time. LCAs have evolved from a business-centric consideration of the environmental impact of a specific product over the products life. This approach takes several phases to end

Cavernous hemangioma presenting marked hyperostosis

International Nuclear Information System (INIS)

Kobata, Hitoshi; Miyake, Hiroji; Kitamura, Junji; Kajikawa, Hiroshi; Ohta, Tomio

1988-01-01

The authors report here a case of hemangioma of the left parietal bone which presented headache and papilledema. This patient is a 37-year-old female who had, prior to admission, complained of increasing headache for one year and blurred vision for three months. She had no history of head injury. Local physical examinations revealed a slight bulging in her left parietal region which was insensitive to palpation and not adherent to the overlying scalp. Neurological examinations revealed bilateral papilledema and an incongruous bitemporal upper quadrant defect in the visual field. All the other neurological and laboratory data were normal. A plain skull roentogenogram showed a 9 x 9 cm osteolytic and characteristic honeycomb lesion in the parietal region. Systemic bone survey revealed a similar lesion in the right tibia which was not histologically examined. A marked accumulation of isotopes was detected on the bone scintigrams at both lesions. Selective external carotid angiograms demonstrated a tumor stain fed by the superficial temporal, occipital, and middle meningial arteries. CT scans of the brain and skull clearly showed a local thickening of and structural changes in the skull bone and also a mass effect on the brain and lateral ventricle. The lesioned bone was removed en bloc and replaced by an artificial bone. It was highly vascular, but not adherent to the overlying dura. The post-operative course was uneventful, and the headache and papilledema disappeared. Hemangioma of the skull presenting marked hyperostosis, as reported above, seems to be rare. In addition, in this case, skeletal angioma without any clinical manifestation was detected. Clinical and radiological pictures of the hemangioma of the skull and other bones were briefly discussed. (author)

Occupational skin hazards and prevalence of occupational skin diseases in shoe manufacturing workers in Indonesia.

Science.gov (United States)

Febriana, Sri Awalia; Soebono, Hardyanto; Coenraads, Pieter-Jan

2014-02-01

Shoe manufacturing workers are exposed daily to an extensive range of potential physical and chemical occupational hazards. Shoe manufacturing in Indonesia is one of the industrial sectors that has shown sustained growth amongst the newly industrialized countries (NICs). In this study, we investigated the possible potential exposure of the workers to physical and occupational hazards and determined the prevalence of occupational skin diseases at a shoe manufacturing factory in Indonesia. A cross-sectional study on the observation of the working process and an inventory and risk assessment of exposure to the chemicals used. Classification of chemicals as potential sensitizers/irritants and qualitative assessments of these chemicals were done. Workers were examined and interviewed using the Nordic Occupational Skin Questionnaire-2002/LONG. The risk of Occupational skin diseases (OSD) at the shoe factory was mainly related to the exposure of the workers' skin to potential physical and chemical hazards in hot and humid environmental conditions. From a total of 514 workers, 8.5 % reported current OSD and 4.8 % reported a history of OSD. Occupational skin diseases were diagnosed in 29 % of the workers by dermatologists and 7.6 % had an occupational contact dermatitis (OCD). Of the 39 workers with contact dermatitis, 33 consented to being patch tested, 14 (3 %) workers showed a positive results and considered as having an occupational allergic contact dermatitis (OACD) and 25 (4.9 %) had an occupational irritant contact dermatitis (OICD). We observed a repeated and prolonged exposure of the workers to numerous physical and chemical skin hazards at this factory.

Progress report - Physical and Environmental Sciences - Physics Division. 1994 January 1 to December 31

International Nuclear Information System (INIS)

Harvey, M.

1995-09-01

This report marks the change from biannual to annual reports recording technical developments in Physics Division. During this period, AECL has continued with its restructuring program, with Physics Division now included in an expanded Physical and Environmental Sciences Unit. The Division itself remains unchanged, with major activities on neutron scattering, the Sudbury Neutrino Observatory and developments and applications of accelerator technology. (author)

Progress report - Physical and Environmental Sciences - Physics Division. 1994 January 1 to December 31

Energy Technology Data Exchange (ETDEWEB)

Harvey, M [ed.

1995-09-01

This report marks the change from biannual to annual reports recording technical developments in Physics Division. During this period, AECL has continued with its restructuring program, with Physics Division now included in an expanded Physical and Environmental Sciences Unit. The Division itself remains unchanged, with major activities on neutron scattering, the Sudbury Neutrino Observatory and developments and applications of accelerator technology. (author).

46 CFR 160.176-23 - Marking.

Science.gov (United States)

2010-10-01

... of the vessel. (2) The type of vessel. (3) Specific purpose or limitation approved by the Coast Guard...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Inflatable Lifejackets § 160.176-23 Marking. (a) General. Each inflatable lifejacket must be marked with the information required by this section. Each marking must be...

Determining the Financial Impact of Flood Hazards in Ungaged Basins

Science.gov (United States)

Cotterman, K. A.; Gutenson, J. L.; Pradhan, N. R.; Byrd, A.

2017-12-01

Many portions of the Earth lack adequate authoritative or in situ data that is of great value in determining natural hazard vulnerability from both anthropogenic and physical perspective. Such locations include the majority of developing nations, which do not possess adequate warning systems and protective infrastructure. The lack of warning and protection from natural hazards make these nations vulnerable to the destructive power of events such as floods. The goal of this research is to demonstrate an initial workflow with which to characterize flood financial hazards with global datasets and crowd-sourced, non-authoritative data in ungagged river basins. This workflow includes the hydrologic and hydraulic response of the watershed to precipitation, characterized by the physics-based modeling application Gridded Surface-Subsurface Hydrologic Analysis (GSSHA) model. In addition, data infrastructure and resources are available to approximate the human impact of flooding. Open source, volunteer geographic information (VGI) data can provide global coverage of elements at risk of flooding. Additional valuation mechanisms can then translate flood exposure into percentage and financial damage to each building. The combinations of these tools allow the authors to remotely assess flood hazards with minimal computational, temporal, and financial overhead. This combination of deterministic and stochastic modeling provides the means to quickly characterize watershed flood vulnerability and will allow emergency responders and planners to better understand the implications of flooding, both spatially and financially. In either a planning, real-time, or forecasting scenario, the system will assist the user in understanding basin flood vulnerability and increasing community resiliency and preparedness.

On-road Bicycle Pavement Markings

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — A mile by mile breakdown of the on-street bicycle pavement markings installed within the City of Pittsburgh. These include bike lanes, shared lane markings...

Marks of Metal Copenhell

DEFF Research Database (Denmark)

2015-01-01

Planchebaseret udendørs udstilling på musikfestivalen Copenhell 18-20/6 2015. En mindre udgave af udstillingen Marks of Metal - Logodesign og visualitet i heavy metal. Udarbejdet i samarbejde med Mediemuseet.......Planchebaseret udendørs udstilling på musikfestivalen Copenhell 18-20/6 2015. En mindre udgave af udstillingen Marks of Metal - Logodesign og visualitet i heavy metal. Udarbejdet i samarbejde med Mediemuseet....

Circulatory Markings at Double-Lane Traffic Roundabout.

NARCIS (Netherlands)

Bie, Jing; Lo, Hong K.; Wong, S.C.

2008-01-01

This paper compares two types of circulatory markings at a double-lane traffic roundabout: the concentric marking scheme and the Alberta marking scheme. The effects of these two marking schemes on drivers' lane choice behavior, delay, and safety, are compared based on data collected from before and

Neutrino radiation hazards: A paper tiger

International Nuclear Information System (INIS)

Cossairt, J.D.; Grossman, N.L.; Marshall, E.T.

1996-09-01

Neutrinos are present in the natural environment due to terrestrial, solar, and cosmic sources and are also produced at accelerators both incidentally and intentionally as part of physics research programs. Progress in fundamental physics research has led to the creation of beams of neutrinos of ever-increasing intensity and/or energy. The large size and cost associated with these beams attracts, and indeed requires, public interest, support, and some understanding of the 'exotic' particles produced, including the neutrinos. Furthermore, the very word neutrino ('little neutral one', as coined by Enrico Fermi) can lead to public concern due to confusion with 'neutron', a word widely associated with radiological hazards. Adding to such possible concerns is a recent assertion, widely publicized, that neutrinos from astronomical events may have led to the extinction of some biological species. Presented here are methods for conservatively estimating the dose equivalent due to neutrinos as well as an assessment of the possible role of neutrinos in biological extinction processes. It is found that neutrinos produced by the sun and modern particle accelerators produce inconsequential dose equivalent rates. Examining recent calculations concerning neutrinos incident upon the earth due to stellar collapse, it is concluded that it is highly unlikely that these neutrinos caused the mass extinctions of species found in the paleontological record. Neutrino radiation hazards are, then, truly a 'paper tiger'. 14 refs., 1 fig., 1 tab

Hazard Management Dealt by Safety Professionals in Colleges: The Impact of Individual Factors

Directory of Open Access Journals (Sweden)

Tsung-Chih Wu

2016-12-01

Full Text Available Identifying, evaluating, and controlling workplace hazards are important functions of safety professionals (SPs. The purpose of this study was to investigate the content and frequency of hazard management dealt by safety professionals in colleges. The authors also explored the effects of organizational factors/individual factors on SPs’ perception of frequency of hazard management. The researchers conducted survey research to achieve the objective of this study. The researchers mailed questionnaires to 200 SPs in colleges after simple random sampling, then received a total of 144 valid responses (response rate = 72%. Exploratory factor analysis indicated that the hazard management scale (HMS extracted five factors, including physical hazards, biological hazards, social and psychological hazards, ergonomic hazards, and chemical hazards. Moreover, the top 10 hazards that the survey results identified that safety professionals were most likely to deal with (in order of most to least frequent were: organic solvents, illumination, other chemicals, machinery and equipment, fire and explosion, electricity, noise, specific chemicals, human error, and lifting/carrying. Finally, the results of one-way multivariate analysis of variance (MANOVA indicated there were four individual factors that impacted the perceived frequency of hazard management which were of statistical and practical significance: job tenure in the college of employment, type of certification, gender, and overall job tenure. SPs within colleges and industries can now discuss plans revolving around these five areas instead of having to deal with all of the separate hazards.

Light-Intensity Physical Activity and All-Cause Mortality.

Science.gov (United States)

Loprinzi, Paul D

2017-07-01

Research demonstrates that moderate-to-vigorous physical activity (MVPA) is associated with a reduced risk of all-cause mortality. Few studies have examined the effects of light-intensity physical activity on mortality. Therefore, the purpose of this study was to examine the association between objectively measured light-intensity physical activity and all-cause mortality risk. Longitudinal. National Health and Nutrition Examination Survey 2003-2006 with follow-up through December 31, 2011. Five thousand five hundred seventy-five U.S. adults. Participants wore an accelerometer for at least 4 days and completed questionnaires to assess sociodemographics and chronic disease information, with blood samples taken to assess biological markers. Follow-up mortality status was assessed via death certificate data from the National Death Index. Cox proportional hazard model. After adjusting for accelerometer-determined MVPA, age, gender, race-ethnicity, cotinine, weight status, poverty level, C-reactive protein, and comorbid illness, for every 60-minute increase in accelerometer-determined light-intensity physical activity, participants had a 16% reduced hazard of all-cause mortality (hazard ratio = .84; 95% confidence interval: .78-.91; p physical activity was inversely associated with all-cause mortality risk, independent of age, MVPA, and other potential confounders. In addition to MVPA, promotion of light-intensity physical activity is warranted.

7 CFR 160.32 - Marking containers.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Marking containers. 160.32 Section 160.32 Agriculture... STANDARDS FOR NAVAL STORES Analysis, Inspection, and Grading on Request § 160.32 Marking containers. The interested person shall provide any labor necessary for marking the containers, after the contents have been...

46 CFR 122.602 - Hull markings.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Hull markings. 122.602 Section 122.602 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150....602 Hull markings. (a) Each vessel must be marked as required by part 67, subpart I, of this chapter...

Stretch Marks

Science.gov (United States)

... completely without the help of a dermatologist or plastic surgeon. These doctors may use one of many types of treatments — from actual surgery to techniques like microdermabrasion and laser treatment — to reduce the appearance of stretch marks. These techniques are ...

27 CFR 28.123 - Export marks.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Export marks. 28.123..., or Transportation to a Manufacturing Bonded Warehouse § 28.123 Export marks. (a) General. In addition... filled under the provisions of part 24 of this chapter, the proprietor shall mark the word “Export” on...

The hazard communication of fragrance allergens must be improved.

Science.gov (United States)

Klaschka, Ursula

2013-07-01

Contact allergy is a global health problem that could be alleviated considerably if the general public could reduce contact to sensitizers. Efficient hazard communication would be a valuable instrument to achieve this. What do current regulations concerning fragrance sensitizers in cosmetic products in Europe contribute? For example, there are bans and restrictions according to the Cosmetic Regulation, there is the "26 allergens rule" that requires that the names of some allergenic fragrance ingredients are listed on the containers, there is labeling and classification of hazardous products according to Regulation 1272/2008, and there is the regulation concerning the registration, evaluation, authorization and restriction of chemicals (REACH). Do these regulations increase consumer protection by suitable hazard communication instruments? Four main problems were identified. First, according to the 26 allergens rule, consumers carry a very large part of the responsibility for risk reduction management. They need to be capable and motivated to recognize the names of strong allergens listed in the ingredient list and decide for themselves whether they want to run the risk or not, provided that they are aware of their responsibility. Second, cosmetic products do not need to be classified and labeled like other consumer goods, according to the European Commission Regulation 1272/2008, if they contain hazardous substances. Third, some pictograms for hazardous substances, for example, the exclamation mark for sensitizers, are not well understood by the majority of the general public. Fourth, very often, the design of cosmetic containers implies health and well being, even if the respective products contain sensitizers or other hazardous substances. Against this background, the following improvements are proposed: 1) the 26 allergens rule needs revision, 2) the exception for cosmetic products from labeling and classification should be abolished, 3) a new self

27 CFR 28.223 - Export marks.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Export marks. 28.223... Export marks. In addition to the marks and brands required to be placed on kegs, barrels, cases, crates... “Export” on each container or case before removal for export, for use on vessels or aircraft, or for...

Runoff inundation hazard cartography

Science.gov (United States)

Pineux, N.; Degré, A.

2012-04-01

Between 1998 and 2004, Europe suffered from more than hundred major inundations, responsible for some 700 deaths, for the moving of about half a million of people and the economic losses of at least 25 billions Euros covered by the insurance policies. Within this context, EU launched the 2007/60/CE directive. The inundations are natural phenomenon. They cannot be avoided. Nevertheless this directive permits to better evaluate the risks and to coordinate the management measures taken at member states level. In most countries, inundation maps only include rivers' overflowing. In Wallonia, overland flows and mudflows also cause huge damages, and must be included in the flood hazard map. Indeed, the cleaning operations for a village can lead to an estimated cost of 11 000 €. Average construction cost of retention dams to control off-site damage caused by floods and muddy flows was valued at 380 000€, and yearly dredging costs associated with these retention ponds at 15 000€. For a small city for which a study was done in a more specific way (Gembloux), the mean annual cost for the damages that can generate the runoff is about 20 000€. This cost consists of the physical damages caused to the real estate and movable properties of the residents as well as the emergency operations of the firemen and the city. On top of damages to public infrastructure (clogging of trenches, silting up of retention ponds) and to private property by muddy flows, runoff generates a significant loss of arable land. Yet, the soil resource is not an unlimited commodity. Moreover, sediments' transfer to watercourses alters their physical and chemical quality. And that is not to mention the increased psychological stress for people. But to map overland flood and mud flow hazard is a real challenge. This poster will present the methodology used to in Wallonia. The methodology is based on 3 project rainfalls: 25, 50 and 100 years return period (consistency with the cartography of the

Analysis of JSI TRIGA MARK II reactor physical parameters calculated with TRIPOLI and MCNP.

Science.gov (United States)

Henry, R; Tiselj, I; Snoj, L

2015-03-01

New computational model of the JSI TRIGA Mark II research reactor was built for TRIPOLI computer code and compared with existing MCNP code model. The same modelling assumptions were used in order to check the differences of the mathematical models of both Monte Carlo codes. Differences between the TRIPOLI and MCNP predictions of keff were up to 100pcm. Further validation was performed with analyses of the normalized reaction rates and computations of kinetic parameters for various core configurations. Copyright © 2014 Elsevier Ltd. All rights reserved.

46 CFR 78.50-5 - Hull markings.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Hull markings. 78.50-5 Section 78.50-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Markings on Vessels § 78.50-5 Hull markings. Vessels shall be marked as required by parts 67 and 69 of this chapter. [CGD 72...

46 CFR 196.40-5 - Hull markings.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Hull markings. 196.40-5 Section 196.40-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS OPERATIONS Markings on Vessels § 196.40-5 Hull markings. Vessels shall be marked as required by parts 67 and 69 of this chapter...

46 CFR 97.40-5 - Hull markings.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Hull markings. 97.40-5 Section 97.40-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS OPERATIONS Markings on Vessels § 97.40-5 Hull markings. Vessels shall be marked as required by parts 67 and 69 of this...

Sociological perspective on the siting of hazardous waste facilities

International Nuclear Information System (INIS)

Mileti, D.S.; Williams, R.G.

1985-01-01

The siting of hazardous waste facilities has been, and will likely continue to be, both an important societal need and a publically controversial topic. Sites have been denounced, shamed, banned, and moved at the same time that the national need for their installation and use has grown. Despite available technologies and physical science capabilities, the effective siting of facilitites stands more as a major contemporary social issue than it is a technological problem. Traditional social impact assessment approaches to the siting process have largely failed to meaningfully contribute to successful project implementation; these efforts have largely ignored the public perception aspects of risk and hazard on the success or failure of facility siting. This paper proposes that the siting of hazardous waste facilities could well take advantage of two rich but somewhat disparate research histories in the social sciences. A convergent and integrated approach would result from the successful blending of social impact assessment, which seeks to define and mitigate problems, with an approach used in hazards policy studies, which has sought to understand and incorporate public risk perceptions into effective public decision-making. It is proposed in this paper that the integration of these two approaches is necessary for arriving at more readily acceptable solutions to siting hazardous waste facilities. This paper illustrates how this integration of approaches could be implemented

Risk methodologies for offsite hazardous materials

International Nuclear Information System (INIS)

Kot, C.A.; Eichler, T.V.; Wiedermann, A.H.

1983-01-01

A number of suggestions have been advanced in recent years concerning the risks posed to nuclear power plants by offsite hazardous materials relative to (1) the regulatory approach including considerations of minimum and safe standoff distances, exclusion distances, site acceptance ceilings and floors, screening distances and screening probabilities, plant design, etc., and (2) the analysis and evaluation procedures such as material screening criteria, plant vulnerability, standarized physical models, etc. An evaluation of current analyses and approaches indicates that this complex problem, variety of approaches, and safety concerns may be better accommodated by developing criteria and treatments along the lines of a so-called conditional risk approach. Specifically, the probability (P) of some ultimate consequence (C) occurring from an accident (A) involving hazardous materials is given as P(C) = P(C/A) x P(A). Assuming that the plant to accident site standoff distance is the fundamental independent variable of the risk methodology, certain conditional risk designations and conditions can be made and are presented

Translating Volcano Hazards Research in the Cascades Into Community Preparedness

Science.gov (United States)

Ewert, J. W.; Driedger, C. L.

2015-12-01

Research by the science community into volcanic histories and physical processes at Cascade volcanoes in the states of Washington, Oregon, and California has been ongoing for over a century. Eruptions in the 20th century at Lassen Peak and Mount St. Helen demonstrated the active nature of Cascade volcanoes; the 1980 eruption of Mount St. Helens was a defining moment in modern volcanology. The first modern volcano hazards assessments were produced by the USGS for some Cascade volcanoes in the 1960s. A rich scientific literature exists, much of which addresses hazards at these active volcanoes. That said community awareness, planning, and preparation for eruptions generally do not occur as a result of a hazard analyses published in scientific papers, but by direct communication with scientists. Relative to other natural hazards, volcanic eruptions (or large earthquakes, or tsunami) are outside common experience, and the public and many public officials are often surprised to learn of the impacts volcanic eruptions could have on their communities. In the 1980s, the USGS recognized that effective hazard communication and preparedness is a multi-faceted, long-term undertaking and began working with federal, state, and local stakeholders to build awareness and foster community action about volcano hazards. Activities included forming volcano-specific workgroups to develop coordination plans for volcano emergencies; a concerted public outreach campaign; curriculum development and teacher training; technical training for emergency managers and first responders; and development of hazard information that is accessible to non-specialists. Outcomes include broader ownership of volcano hazards as evidenced by bi-national exchanges of emergency managers, community planners, and first responders; development by stakeholders of websites focused on volcano hazards mitigation; and execution of table-top and functional exercises, including evacuation drills by local communities.

Incineration of hazardous waste: A critical review update

International Nuclear Information System (INIS)

Dempsey, C.R.; Oppelt, E.T.

1993-01-01

Over the last 15 years, concern over improper disposal practices of the past has manifested itself in the passage of a series of federal and state-level hazardous waste cleanup and control statutes of unprecedented scope. The more traditional and lowest-cost methods of direct landfilling, storage in surface impoundments and deep-well injection are being replaced in large measure by waste minimization at the source of generation, waste reuse, physical/chemical/biological treatment, incineration and chemical stabilization/solidification methods. Of all of the 'permanent' treatment technologies, properly designed incineration systems are capable of the highest overall degree of destruction and control for the broadest range of hazardous waste streams. Substantial design and operation experience exists in this area and a wide variety of commercial systems are available. Consequently, significant growth is anticipated in the use of incineration and other thermal destruction methods. The objective of this review is to examine the current state of knowledge regarding hazardous waste incineration in an effort to put these technological and environmental issues into perspective

Working towards a clearer and more helpful hazard map: investigating the influence of hazard map design on hazard communication

Science.gov (United States)

Thompson, M. A.; Lindsay, J. M.; Gaillard, J.

2015-12-01

Globally, geological hazards are communicated using maps. In traditional hazard mapping practice, scientists analyse data about a hazard, and then display the results on a map for stakeholder and public use. However, this one-way, top-down approach to hazard communication is not necessarily effective or reliable. The messages which people take away will be dependent on the way in which they read, interpret, and understand the map, a facet of hazard communication which has been relatively unexplored. Decades of cartographic studies suggest that variables in the visual representation of data on maps, such as colour and symbology, can have a powerful effect on how people understand map content. In practice, however, there is little guidance or consistency in how hazard information is expressed and represented on maps. Accordingly, decisions are often made based on subjective preference, rather than research-backed principles. Here we present the results of a study in which we explore how hazard map design features can influence hazard map interpretation, and we propose a number of considerations for hazard map design. A series of hazard maps were generated, with each one showing the same probabilistic volcanic ashfall dataset, but using different verbal and visual variables (e.g., different colour schemes, data classifications, probabilistic formats). Following a short pilot study, these maps were used in an online survey of 110 stakeholders and scientists in New Zealand. Participants answered 30 open-ended and multiple choice questions about ashfall hazard based on the different maps. Results suggest that hazard map design can have a significant influence on the messages readers take away. For example, diverging colour schemes were associated with concepts of "risk" and decision-making more than sequential schemes, and participants made more precise estimates of hazard with isarithmic data classifications compared to binned or gradational shading. Based on such

Probabilistic versus deterministic hazard assessment in liquefaction susceptible zones

Science.gov (United States)

Daminelli, Rosastella; Gerosa, Daniele; Marcellini, Alberto; Tento, Alberto

2015-04-01

Probabilistic seismic hazard assessment (PSHA), usually adopted in the framework of seismic codes redaction, is based on Poissonian description of the temporal occurrence, negative exponential distribution of magnitude and attenuation relationship with log-normal distribution of PGA or response spectrum. The main positive aspect of this approach stems into the fact that is presently a standard for the majority of countries, but there are weak points in particular regarding the physical description of the earthquake phenomenon. Factors like site effects, source characteristics like duration of the strong motion and directivity that could significantly influence the expected motion at the site are not taken into account by PSHA. Deterministic models can better evaluate the ground motion at a site from a physical point of view, but its prediction reliability depends on the degree of knowledge of the source, wave propagation and soil parameters. We compare these two approaches in selected sites affected by the May 2012 Emilia-Romagna and Lombardia earthquake, that caused widespread liquefaction phenomena unusually for magnitude less than 6. We focus on sites liquefiable because of their soil mechanical parameters and water table level. Our analysis shows that the choice between deterministic and probabilistic hazard analysis is strongly dependent on site conditions. The looser the soil and the higher the liquefaction potential, the more suitable is the deterministic approach. Source characteristics, in particular the duration of strong ground motion, have long since recognized as relevant to induce liquefaction; unfortunately a quantitative prediction of these parameters appears very unlikely, dramatically reducing the possibility of their adoption in hazard assessment. Last but not least, the economic factors are relevant in the choice of the approach. The case history of 2012 Emilia-Romagna and Lombardia earthquake, with an officially estimated cost of 6 billions

Workplace Hazards Faced by Nursing Assistants in the United States: A Focused Literature Review

Science.gov (United States)

Walton, AnnMarie Lee; Rogers, Bonnie

2017-01-01

Nursing assistants (NAs) make up a large share of the healthcare provider workforce and their numbers are expected to grow. NAs are predominantly women who earn a low wage and report financial, work, and family demands. Working as a NA is hazardous; this manuscript specifically examines the biological/infectious, chemical, enviromechanical, physical and psychosocial hazards that appear in the literature to date. A focused search strategy was used to review literature about hazards that fell into each of the five aforementioned domains. While some hazards that were documented were clear, such as exposure to influenza because of close contact with patients (biological/infectious), or exposure to hazardous drugs (chemical), literature was limited. The majority of the literature we reviewed fell into the domain of psychosocial hazards and centered on stress from workplace organization issues (such as mandatory overtime, lack of managerial support, and feeling rushed). More research is needed to understand which hazards NAs identify as most concerning and tailored interventions are needed for risk mitigation. PMID:28534859

Workplace Hazards Faced by Nursing Assistants in the United States: A Focused Literature Review

Directory of Open Access Journals (Sweden)

AnnMarie Lee Walton

2017-05-01

Full Text Available Nursing assistants (NAs make up a large share of the healthcare provider workforce and their numbers are expected to grow. NAs are predominantly women who earn a low wage and report financial, work, and family demands. Working as a NA is hazardous; this manuscript specifically examines the biological/infectious, chemical, enviromechanical, physical and psychosocial hazards that appear in the literature to date. A focused search strategy was used to review literature about hazards that fell into each of the five aforementioned domains. While some hazards that were documented were clear, such as exposure to influenza because of close contact with patients (biological/infectious, or exposure to hazardous drugs (chemical, literature was limited. The majority of the literature we reviewed fell into the domain of psychosocial hazards and centered on stress from workplace organization issues (such as mandatory overtime, lack of managerial support, and feeling rushed. More research is needed to understand which hazards NAs identify as most concerning and tailored interventions are needed for risk mitigation.

Hazard Analysis Database Report

Energy Technology Data Exchange (ETDEWEB)

GAULT, G.W.

1999-10-13

The Hazard Analysis Database was developed in conjunction with the hazard analysis activities conducted in accordance with DOE-STD-3009-94, Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports, for the Tank Waste Remediation System (TWRS) Final Safety Analysis Report (FSAR). The FSAR is part of the approved TWRS Authorization Basis (AB). This document describes, identifies, and defines the contents and structure of the TWRS FSAR Hazard Analysis Database and documents the configuration control changes made to the database. The TWRS Hazard Analysis Database contains the collection of information generated during the initial hazard evaluations and the subsequent hazard and accident analysis activities. The database supports the preparation of Chapters 3,4, and 5 of the TWRS FSAR and the USQ process and consists of two major, interrelated data sets: (1) Hazard Evaluation Database--Data from the results of the hazard evaluations; and (2) Hazard Topography Database--Data from the system familiarization and hazard identification.

Argonne National Laboratory, east hazardous waste shipment data validation

International Nuclear Information System (INIS)

Casey, C.; Graden, C.; Coveleskie, A.

1995-09-01

At the request of EM-331, the Radioactive Waste Technical Support Program (TSP) is conducting an evaluation of data regarding past hazardous waste shipments from DOE sites to commercial TSDFs. The intent of the evaluation is to find out if, from 1984 to 1991, DOE sites could have shipped hazardous waste contaminated with DOE-added radioactivity to commercial TSDFs not licensed to receive radioactive material. A team visited Argonne National Laboratory, East (ANL-E) to find out if any data existed that would help to make such a determination at ANL-E. The team was unable to find any relevant data. The team interviewed personnel who worked in waste management at the time. All stated that ANL-E did not sample and analyze hazardous waste shipments for radioactivity. Waste generators at ANL-E relied on process knowledge to decide that their waste was not radioactive. Also, any item leaving a building where radioisotopes were used was surveyed using hand-held instrumentation. If radioactivity above the criteria in DOE Order 5400.5 was found, the item was considered radioactive. The only documentation still available is the paperwork filled out by the waste generator and initialed by a health physics technician to show no contamination was found. The team concludes that, since all waste shipped offsite was subjected at least once to health physics instrumentation scans, the waste shipped from ANL-E from 1984 to 1991 may be considered clean

Landscape Hazards in Yukon Communities: Geological Mapping for Climate Change Adaptation Planning

Science.gov (United States)

Kennedy, K.; Kinnear, L.

2010-12-01

Climate change is considered to be a significant challenge for northern communities where the effects of increased temperature and climate variability are beginning to affect infrastructure and livelihoods (Arctic Climate Impact Assessment, 2004). Planning for and adapting to ongoing and future changes in climate will require the identification and characterization of social, economic, cultural, political and biophysical vulnerabilities. This pilot project addresses physical landscape vulnerabilities in two communities in the Yukon Territory through community-scale landscape hazard mapping and focused investigations of community permafrost conditions. Landscape hazards are identified by combining pre-existing data from public utilities and private-sector consultants with new geophysical techniques (ground penetrating radar and electrical resistivity), shallow drilling, surficial geological mapping, and permafrost characterization. Existing landscape vulnerabilities are evaluated based on their potential for hazard (low, medium or high) under current climate conditions, as well as under future climate scenarios. Detailed hazard maps and landscape characterizations for both communities will contribute to overall adaptation plans and allow for informed development, planning and mitigation of potentially threatening hazards in and around the communities.

Integrating expert opinion with modelling for quantitative multi-hazard risk assessment in the Eastern Italian Alps

Science.gov (United States)

Chen, Lixia; van Westen, Cees J.; Hussin, Haydar; Ciurean, Roxana L.; Turkington, Thea; Chavarro-Rincon, Diana; Shrestha, Dhruba P.

2016-11-01

Extreme rainfall events are the main triggering causes for hydro-meteorological hazards in mountainous areas, where development is often constrained by the limited space suitable for construction. In these areas, hazard and risk assessments are fundamental for risk mitigation, especially for preventive planning, risk communication and emergency preparedness. Multi-hazard risk assessment in mountainous areas at local and regional scales remain a major challenge because of lack of data related to past events and causal factors, and the interactions between different types of hazards. The lack of data leads to a high level of uncertainty in the application of quantitative methods for hazard and risk assessment. Therefore, a systematic approach is required to combine these quantitative methods with expert-based assumptions and decisions. In this study, a quantitative multi-hazard risk assessment was carried out in the Fella River valley, prone to debris flows and flood in the north-eastern Italian Alps. The main steps include data collection and development of inventory maps, definition of hazard scenarios, hazard assessment in terms of temporal and spatial probability calculation and intensity modelling, elements-at-risk mapping, estimation of asset values and the number of people, physical vulnerability assessment, the generation of risk curves and annual risk calculation. To compare the risk for each type of hazard, risk curves were generated for debris flows, river floods and flash floods. Uncertainties were expressed as minimum, average and maximum values of temporal and spatial probability, replacement costs of assets, population numbers, and physical vulnerability. These result in minimum, average and maximum risk curves. To validate this approach, a back analysis was conducted using the extreme hydro-meteorological event that occurred in August 2003 in the Fella River valley. The results show a good performance when compared to the historical damage reports.

Mark II magnetic detector for SPEAR

International Nuclear Information System (INIS)

Larsen, R.R.

1975-01-01

The Mark II Detector, presently in the design stage, is a SLAC/LBL detector project to replace the Mark I now in operation at SPEAR. While similar in concept to the Mark I it will have improved momentum resolution, shower detection, solid angle coverage for both triggering and tracking and a magnet design providing easier access to those particles transmitted through the aluminum coil

Identification of Hazardous Events for Drinking Water Production Process Using Managed Aquifer Recharge in the Nakdong River Delta, Korea

International Nuclear Information System (INIS)

Sang-Il, L.; Ji, H.W.

2016-01-01

Various hazardous events can cause chemical, microbial or physical hazards to a water supply system. The World Health Organization (WHO) and some countries have introduced the hazardous event analysis for identifying potential events which may be harmful to the safety of drinking water. This study extends the application of the hazardous event analysis into drinking water production using managed aquifer recharge (MAR). MAR is a way of using an aquifer to secure water resources by storing freshwater for future use and pumping it whenever necessary. The entire drinking water production process is subjected to the analysis from the catchment area to the consumer. Hazardous event analysis incorporates site-specific data as well as common issues occurring in the process of drinking water production. The hazardous events are classified based on chemical, microbial or physical characteristics. Likelihood and severity values are assigned, resulting in quantitative risk by multiplying them. The study site is located at a coastal area in the delta of the Nakdong River, South Korea. The site has suffered from salt water intrusion and surface water pollution from the water upstream. Nine major hazardous events were identified out of total 114 events from 10 drinking water production processes. These major hazardous events will provide useful information on what to be done to secure the water quality produced by a new water supply method. (author)

Mark Napier / Mark Napier ; interv. Tilman Baumgärtel

Index Scriptorium Estoniae

Napier, Mark

2006-01-01

Ameerika kunstnikust Mark Napierist (sünd. 1961) ja tema loomingust, 2001. a. tehtud meiliintervjuu kunstnikuga. Võrguteosest "The Digital Landfill" (1998), koos Andy Deckiga loodud tööst "GrafficJam" (1999), töödest "Shredder" (1998), "Feed", "Riot", "P-Soup" (2000), võrgukunstist ja muust

Remote biopsy darting and marking of polar bears

Science.gov (United States)

Pagano, Anthony M.; Peacock, Elizabeth; McKinney, Melissa A.

2014-01-01

Remote biopsy darting of polar bears (Ursus maritimus) is less invasive and time intensive than physical capture and is therefore useful when capture is challenging or unsafe. We worked with two manufacturers to develop a combination biopsy and marking dart for use on polar bears. We had an 80% success rate of collecting a tissue sample with a single biopsy dart and collected tissue samples from 143 polar bears on land, in water, and on sea ice. Dye marks ensured that 96% of the bears were not resampled during the same sampling period, and we recovered 96% of the darts fired. Biopsy heads with 5 mm diameters collected an average of 0.12 g of fur, tissue, and subcutaneous adipose tissue, while biopsy heads with 7 mm diameters collected an average of 0.32 g. Tissue samples were 99.3% successful (142 of 143 samples) in providing a genetic and sex identification of individuals. We had a 64% success rate collecting adipose tissue and we successfully examined fatty acid signatures in all adipose samples. Adipose lipid content values were lower compared to values from immobilized or harvested polar bears, indicating that our method was not suitable for quantifying adipose lipid content.

Egyptian Environmental Activities and Regulations for Management of Hazardous Substances and Hazardous Wastes

International Nuclear Information System (INIS)

El Zarka, M.

1999-01-01

A substantial use of hazardous substances is essential to meet the social and economic goals of the community in Egypt. Agrochemicals are being used extensively to increase crop yield. The outdated agrochemicals and their empty containers represent a serious environmental problem. Industrial development in different sectors in Egypt obligates handling of huge amounts of hazardous substances and hazardous wastes. The inappropriate handling of such hazardous substances creates several health and environmental problems. Egypt faces many challenges to control safe handling of such substances and wastes. Several regulations are governing handling of hazardous substances in Egypt. The unified Environmental Law 4 for the year 1994 includes a full chapter on the Management of Hazardous Substances and Hazardous Wastes. National and international activities have been taken to manage hazardous substances and hazardous wastes in an environmental sound manner

Hazard classification methodology

International Nuclear Information System (INIS)

Brereton, S.J.

1996-01-01

This document outlines the hazard classification methodology used to determine the hazard classification of the NIF LTAB, OAB, and the support facilities on the basis of radionuclides and chemicals. The hazard classification determines the safety analysis requirements for a facility

Engineered Nanomaterials, Sexy New Technology and Potential Hazards

International Nuclear Information System (INIS)

Beaulieu, R.A.

2009-01-01

Engineered nanomaterials enhance exciting new applications that can greatly benefit society in areas of cancer treatments, solar energy, energy storage, and water purification. While nanotechnology shows incredible promise in these and other areas by exploiting nanomaterials unique properties, these same properties can potentially cause adverse health effects to workers who may be exposed during work. Dispersed nanoparticles in air can cause adverse health effects to animals not merely due to their chemical properties but due to their size, structure, shape, surface chemistry, solubility, carcinogenicity, reproductive toxicity, mutagenicity, dermal toxicity, and parent material toxicity. Nanoparticles have a greater likelihood of lung deposition and blood absorption than larger particles due to their size. Nanomaterials can also pose physical hazards due to their unusually high reactivity, which makes them useful as catalysts, but has the potential to cause fires and explosions. Characterization of the hazards (and potential for exposures) associated with nanomaterial development and incorporation in other products is an essential step in the development of nanotechnologies. Developing controls for these hazards are equally important. Engineered controls should be integrated into nanomaterial manufacturing process design according to 10CFR851, DOE Policy 456.1, and DOE Notice 456.1 as safety-related hardware or administrative controls for worker safety. Nanomaterial hazards in a nuclear facility must also meet control requirements per DOE standards 3009, 1189, and 1186. Integration of safe designs into manufacturing processes for new applications concurrent with the developing technology is essential for worker safety. This paper presents a discussion of nanotechnology, nanomaterial properties/hazards and controls

Design Report for the core design of the first core Mark-Ia of the SNR-300

International Nuclear Information System (INIS)

Stanculescu, A.

1984-05-01

The report describes the first core Mark-Ia of the SNR-300 reactor and its different assembly types with their operational strategy. Methods, criteria and results of the neutron physical, thermal hydraulic and core mechanical design of the whole core and its assemblies are presented

Exploration of resilience assessments for natural hazards

Science.gov (United States)

Lo Jacomo, Anna; Han, Dawei; Champneys, Alan

2017-04-01

The occurrence of extreme events due to natural hazards is difficult to predict. Extreme events are stochastic in nature, there is a lack of long term data on their occurrence, and there are still gaps in our understanding of their physical processes. This difficulty in prediction will be exacerbated by climate change and human activities. Yet traditional risk assessments measure risk as the probability of occurrence of a hazard, multiplied by the consequences of the hazard occurring, which ignores the recovery process. In light of the increasing concerns on disaster risks and the related system recovery, resilience assessments are being used as an approach which complements and builds on traditional risk assessments and management. In mechanical terms, resilience refers to the amount of energy per unit volume that a material can absorb while maintaining its ability to return to its original shape. Resilience was first applied in the fields of psychology and ecology, and more recently has been used in areas such as social sciences, economics, and engineering. A common metaphor for understanding resilience is the stability landscape. The landscape consists of a surface of interconnected basins, where each basin represents different states of a system, which is a point on the stability landscape. The resilience of the system is its capacity and tendency to remain within a particular basin. This depends on the topology of the landscape, on the system's current position, and on its reaction to different shocks and stresses. In practical terms, resilience assessments have been conducted for various purposes in different sectors. These assessments vary in their required inputs, the methodologies applied, and the output they produce. Some measures used for resilience assessments are hazard independent. These focus on the intrinsic capabilities of a system, for example the insurance coverage of a community, or the buffer capacity of a water storage reservoir. Other

Undersampling power-law size distributions: effect on the assessment of extreme natural hazards

Science.gov (United States)

Geist, Eric L.; Parsons, Thomas E.

2014-01-01

The effect of undersampling on estimating the size of extreme natural hazards from historical data is examined. Tests using synthetic catalogs indicate that the tail of an empirical size distribution sampled from a pure Pareto probability distribution can range from having one-to-several unusually large events to appearing depleted, relative to the parent distribution. Both of these effects are artifacts caused by limited catalog length. It is more difficult to diagnose the artificially depleted empirical distributions, since one expects that a pure Pareto distribution is physically limited in some way. Using maximum likelihood methods and the method of moments, we estimate the power-law exponent and the corner size parameter of tapered Pareto distributions for several natural hazard examples: tsunamis, floods, and earthquakes. Each of these examples has varying catalog lengths and measurement thresholds, relative to the largest event sizes. In many cases where there are only several orders of magnitude between the measurement threshold and the largest events, joint two-parameter estimation techniques are necessary to account for estimation dependence between the power-law scaling exponent and the corner size parameter. Results indicate that whereas the corner size parameter of a tapered Pareto distribution can be estimated, its upper confidence bound cannot be determined and the estimate itself is often unstable with time. Correspondingly, one cannot statistically reject a pure Pareto null hypothesis using natural hazard catalog data. Although physical limits to the hazard source size and by attenuation mechanisms from source to site constrain the maximum hazard size, historical data alone often cannot reliably determine the corner size parameter. Probabilistic assessments incorporating theoretical constraints on source size and propagation effects are preferred over deterministic assessments of extreme natural hazards based on historic data.

29 CFR Appendix B to Subpart I to... - Non-mandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment...

Science.gov (United States)

2010-07-01

... velocities, masses, projectile shape, radiation intensities, with the capabilities of the available... selecting head protection, knowledge of potential electrical hazards is important. Class A helmets, in... required, the duration, frequency, and degree of exposure of the hazard, and the physical stresses that...

Responses of female rock lizards to multiple scent marks of males: effects of male age, male density and scent over-marking.

Science.gov (United States)

Martín, José; López, Pilar

2013-03-01

Scent-marked substrates may inform conspecifics on the characteristics of territorial males. Scent-marks of male Carpetan rock lizards (Iberolacerta cyreni) affect space use of females, which by selecting an area may increase the probability of mating with the male that has scent-marked that area. However, males do not hold exclusive territories, and scent-marks of different individual males are often together. This may provide complex information from multiple sources on the social structure. Here, we examined female preference in response to scent marks of various males and combinations in a laboratory experiment. Females preferred areas scent-marked by territorial old males against those scent-marked by young satellite-sneaker males. This reflected the known preference of females for mating with old males. In a second experiment, females preferred areas scent-marked by two males to areas of similar size marked by a single male. This may increase the probability of obtaining multiple copulations with different males, which may favour sperm competition and cryptic female choice, or may be a way to avoid infertile males. Finally, when we experimentally over-marked the scent-marks of an old male with scent-marks of a young male, females did not avoid, nor prefer, the over-marked area, suggesting that the quality of the old male may override the presence of a satellite male. We suggest that, irrespective of the causes underlying why a female selects a scent-marked area, this strategy may affect her reproductive success, which may have the same evolutionary consequences that "direct" mate choice decisions of other animals. Copyright © 2013 Elsevier B.V. All rights reserved.

Percentage Retail Mark-Ups

OpenAIRE

Thomas von Ungern-Sternberg

1999-01-01

A common assumption in the literature on the double marginalization problem is that the retailer can set his mark-up only in the second stage of the game after the producer has moved. To the extent that the sequence of moves is designed to reflect the relative bargaining power of the two parties it is just as plausible to let the retailer move first. Furthermore, retailers frequently calculate their selling prices by adding a percentage mark-up to their wholesale prices. This allows a retaile...

Recognizing Job Health Hazards. Module SH-08. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on recognizing job health hazards is one of 50 modules concerned with job safety and health. This module presents the four general categories of environmental conditions or stresses: chemical, physical, biological, and ergonomic. Following the introduction, 14 objectives (each keyed to a page in the text) the student is…

Flight Testing a Real-Time Hazard Detection System for Safe Lunar Landing on the Rocket-Powered Morpheus Vehicle

Science.gov (United States)

Trawny, Nikolas; Huertas, Andres; Luna, Michael E.; Villalpando, Carlos Y.; Martin, Keith E.; Carson, John M.; Johnson, Andrew E.; Restrepo, Carolina; Roback, Vincent E.

2015-01-01

The Hazard Detection System (HDS) is a component of the ALHAT (Autonomous Landing and Hazard Avoidance Technology) sensor suite, which together provide a lander Guidance, Navigation and Control (GN&C) system with the relevant measurements necessary to enable safe precision landing under any lighting conditions. The HDS consists of a stand-alone compute element (CE), an Inertial Measurement Unit (IMU), and a gimbaled flash LIDAR sensor that are used, in real-time, to generate a Digital Elevation Map (DEM) of the landing terrain, detect candidate safe landing sites for the vehicle through Hazard Detection (HD), and generate hazard-relative navigation (HRN) measurements used for safe precision landing. Following an extensive ground and helicopter test campaign, ALHAT was integrated onto the Morpheus rocket-powered terrestrial test vehicle in March 2014. Morpheus and ALHAT then performed five successful free flights at the simulated lunar hazard field constructed at the Shuttle Landing Facility (SLF) at Kennedy Space Center, for the first time testing the full system on a lunar-like approach geometry in a relevant dynamic environment. During these flights, the HDS successfully generated DEMs, correctly identified safe landing sites and provided HRN measurements to the vehicle, marking the first autonomous landing of a NASA rocket-powered vehicle in hazardous terrain. This paper provides a brief overview of the HDS architecture and describes its in-flight performance.

Laser marking method and device

International Nuclear Information System (INIS)

Okazaki, Yuki; Aoki, Nobutada; Mukai, Narihiko; Sano, Yuji; Yamamoto, Seiji.

1997-01-01

An object is disposed in laser beam permeating liquid or gaseous medium. Laser beams such as CW laser or pulse laser oscillated from a laser device are emitted to the object to apply laser markings with less degradation of identification and excellent corrosion resistance on the surface of the object simply and easily. Upon applying the laser markings, a liquid or gas as a laser beam permeating medium is blown onto the surface of the object, or the liquid or gas in the vicinity of the object is sucked, the laser beam-irradiated portion on the surface can be cooled positively. Accordingly, the laser marking can be formed on the surface of the object with less heat affection to the object. In addition, if the content of a nitrogen gas in the laser beam permeating liquid medium is reduced by degassing to lower than a predetermined value, or the laser beam permeating gaseous medium is formed by an inert gas, a laser marking having high corrosion resistance and reliability can be formed on the surface of the objective member. (N.H.)

Einstein and solid-state physics

International Nuclear Information System (INIS)

Aut, I.

1982-01-01

A connection between the development of solid-state physics and the works and activity of Albert Einstein is traced. A tremendous Einstein contribution to solid state physics is marked. A strict establishment of particle-wave dualism; a conclusion about the applicability of the Plank radiation law not only to black body radiation; finding out particles indistinguishability - all three discoveries have a principle significance for solid state physics too

Reducing hazardous waste generation: an evaluation and a call for action

National Research Council Canada - National Science Library

National Research Council Staff; Environmental Studies Board; Commission on Physical Sciences, Mathematics, and Applications; Division on Engineering and Physical Sciences; National Research Council; National Academy of Sciences

1985-01-01

... Considerations in Reducing the Generation of Hazardous Industrial Wastes Environmental Studies Board Commission on Physical Sciences, Mathematics, and Resources National Research Council NATIONAL ACADEMY PRESS Washington, D.C. 1985 Copyrightoriginal retained, the be not from cannot book, paper original however, for version formatting, authoritative the typesett...

''Hazardous'' terminology

International Nuclear Information System (INIS)

Powers, J.

1991-01-01

A number of terms (e.g., ''hazardous chemicals,'' ''hazardous materials,'' ''hazardous waste,'' and similar nomenclature) refer to substances that are subject to regulation under one or more federal environmental laws. State laws and regulations also provide additional, similar, or identical terminology that may be confused with the federally defined terms. Many of these terms appear synonymous, and it easy to use them interchangeably. However, in a regulatory context, inappropriate use of narrowly defined terms can lead to confusion about the substances referred to, the statutory provisions that apply, and the regulatory requirements for compliance under the applicable federal statutes. This information Brief provides regulatory definitions, a brief discussion of compliance requirements, and references for the precise terminology that should be used when referring to ''hazardous'' substances regulated under federal environmental laws. A companion CERCLA Information Brief (EH-231-004/0191) addresses ''toxic'' nomenclature

Mark 4A project training evaluation

Science.gov (United States)

Stephenson, S. N.

1985-01-01

A participant evaluation of a Deep Space Network (DSN) is described. The Mark IVA project is an implementation to upgrade the tracking and data acquisition systems of the dSN. Approximately six hundred DSN operations and engineering maintenance personnel were surveyed. The survey obtained a convenience sample including trained people within the population in order to learn what training had taken place and to what effect. The survey questionnaire used modifications of standard rating scales to evaluate over one hundred items in four training dimensions. The scope of the evaluation included Mark IVA vendor training, a systems familiarization training seminar, engineering training classes, a on-the-job training. Measures of central tendency were made from participant rating responses. Chi square tests of statistical significance were performed on the data. The evaluation results indicated that the effects of different Mark INA training methods could be measured according to certain ratings of technical training effectiveness, and that the Mark IVA technical training has exhibited positive effects on the abilities of DSN personnel to operate and maintain new Mark IVA equipment systems.

Mark 4A project training evaluation

Science.gov (United States)

Stephenson, S. N.

1985-11-01

A participant evaluation of a Deep Space Network (DSN) is described. The Mark IVA project is an implementation to upgrade the tracking and data acquisition systems of the dSN. Approximately six hundred DSN operations and engineering maintenance personnel were surveyed. The survey obtained a convenience sample including trained people within the population in order to learn what training had taken place and to what effect. The survey questionnaire used modifications of standard rating scales to evaluate over one hundred items in four training dimensions. The scope of the evaluation included Mark IVA vendor training, a systems familiarization training seminar, engineering training classes, a on-the-job training. Measures of central tendency were made from participant rating responses. Chi square tests of statistical significance were performed on the data. The evaluation results indicated that the effects of different Mark INA training methods could be measured according to certain ratings of technical training effectiveness, and that the Mark IVA technical training has exhibited positive effects on the abilities of DSN personnel to operate and maintain new Mark IVA equipment systems.

Hazard Analysis Database Report

CERN Document Server

Grams, W H

2000-01-01

The Hazard Analysis Database was developed in conjunction with the hazard analysis activities conducted in accordance with DOE-STD-3009-94, Preparation Guide for U S . Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports, for HNF-SD-WM-SAR-067, Tank Farms Final Safety Analysis Report (FSAR). The FSAR is part of the approved Authorization Basis (AB) for the River Protection Project (RPP). This document describes, identifies, and defines the contents and structure of the Tank Farms FSAR Hazard Analysis Database and documents the configuration control changes made to the database. The Hazard Analysis Database contains the collection of information generated during the initial hazard evaluations and the subsequent hazard and accident analysis activities. The Hazard Analysis Database supports the preparation of Chapters 3 ,4 , and 5 of the Tank Farms FSAR and the Unreviewed Safety Question (USQ) process and consists of two major, interrelated data sets: (1) Hazard Analysis Database: Data from t...

Cooperative Shark Mark Recapture Database (MRDBS)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Shark Mark Recapture Database is a Cooperative Research Program database system used to keep multispecies mark-recapture information in a common format for...

MarkIT büroo = Offices of MarkIT

Index Scriptorium Estoniae

2010-01-01

Tallinnas Pärnu mnt. 102C asuvas büroohoones paikneva MarkIT büroo sisekujundusest. Sisearhitektid Kard Männil (SAB Miu Miu Miu) ja Loreida Hein (Studio La), nende tähtsamate tööde loetelu. Valge büroomööbel on sisearhitektide projekteeritud. Graafika on sisearhitektid ise joonistanud

User’s guide for MapMark4GUI—A graphical user interface for the MapMark4 R package

Science.gov (United States)

Shapiro, Jason

2018-05-29

MapMark4GUI is an R graphical user interface (GUI) developed by the U.S. Geological Survey to support user implementation of the MapMark4 R statistical software package. MapMark4 was developed by the U.S. Geological Survey to implement probability calculations for simulating undiscovered mineral resources in quantitative mineral resource assessments. The GUI provides an easy-to-use tool to input data, run simulations, and format output results for the MapMark4 package. The GUI is written and accessed in the R statistical programming language. This user’s guide includes instructions on installing and running MapMark4GUI and descriptions of the statistical output processes, output files, and test data files.

Identifying urban infrastructure multi-hazard risk in developing country contexts

Science.gov (United States)

Taylor, Faith; Malamud, Bruce; Millington, James

2017-04-01

This work presents a method to coarsely zone urban areas into different infrastructure typologies, from which physical vulnerability to a range of natural hazards and multi-hazard interactions can be estimated, particularly for developing country contexts where access to data can be a challenge. This work builds upon techniques developed for urban micrometeorology for classifying 12 urban typologies (Stewart and Oke, 2011) using Landsat 8 30 m × 30 m remote sensing imagery (Betchel et al., 2015). For each of these 12 urban typologies, we develop general rules about the presence, type and level of service of 10 broad categories of infrastructure (including buildings, roads, electricity and water), which we refer to as 'urban textures'. We have developed and applied this technique to five urban areas varying in size and structure across Africa: Nairobi (Kenya); Karonga (Malawi); Mzuzu (Malawi); Ibadan (Nigeria) and Cape Town (South Africa). For each urban area, a training dataset of 10 samples of each of the 12 urban texture classes is digitised using Google Earth imagery. A random forest classification is performed using SAGA GIS, resulting in a map of different urban typologies for each city. Based on >1200 georeferenced field photographs and expert interviews for Karonga (Malawi) and Nairobi (Kenya), generally applicable rules about the presence, type and level of service of 12 infrastructure types (the 'urban texture') are developed for each urban typology. For each urban texture, we are broadly reviewing how each infrastructure might be physically impacted by 21 different natural hazards and hazard interactions. This can aid local stakeholders such as emergency responders and urban planners to systematically identify how the infrastructure in different parts of an urban area might be affected differently during a natural disaster event.

Identify alkylation hazards

International Nuclear Information System (INIS)

Scott, B.

1992-01-01

This paper reports that extensive experience shows that alkylation plants regardless of acid catalyst choice, can be operated safely, and with minimum process risk to employees or neighbors. Both types of plants require a comprehensive and fully supported hazard management program that accounts for differing physical properties of the acids involved. Control and mitigation cost to refiners will vary considerably from plant to plant and location to location. In the author's experience, the order of magnitude costs will be about $1 to $2 million for a sulfuric acid (SA) alkylation plant, and about $10 to $15 million for a hydrofluoric acid (HF) plant. These costs include water supply systems and impoundment facilities for contaminated runoff water. The alkylation process, which chemically reacts isobutane and light olefins in the presence of a strong acid catalyst into a premium gasoline component is described

ThinkHazard!: an open-source, global tool for understanding hazard information

Science.gov (United States)

Fraser, Stuart; Jongman, Brenden; Simpson, Alanna; Nunez, Ariel; Deparday, Vivien; Saito, Keiko; Murnane, Richard; Balog, Simone

2016-04-01

Rapid and simple access to added-value natural hazard and disaster risk information is a key issue for various stakeholders of the development and disaster risk management (DRM) domains. Accessing available data often requires specialist knowledge of heterogeneous data, which are often highly technical and can be difficult for non-specialists in DRM to find and exploit. Thus, availability, accessibility and processing of these information sources are crucial issues, and an important reason why many development projects suffer significant impacts from natural hazards. The World Bank's Global Facility for Disaster Reduction and Recovery (GFDRR) is currently developing a new open-source tool to address this knowledge gap: ThinkHazard! The main aim of the ThinkHazard! project is to develop an analytical tool dedicated to facilitating improvements in knowledge and understanding of natural hazards among non-specialists in DRM. It also aims at providing users with relevant guidance and information on handling the threats posed by the natural hazards present in a chosen location. Furthermore, all aspects of this tool will be open and transparent, in order to give users enough information to understand its operational principles. In this presentation, we will explain the technical approach behind the tool, which translates state-of-the-art probabilistic natural hazard data into understandable hazard classifications and practical recommendations. We will also demonstrate the functionality of the tool, and discuss limitations from a scientific as well as an operational perspective.

A test of safety, violence prevention, and civility climate domain-specific relationships with relevant workplace hazards.

Science.gov (United States)

Gazica, Michele W; Spector, Paul E

2016-01-01

Safety climate, violence prevention climate, and civility climate were independently developed and linked to domain-specific workplace hazards, although all three were designed to promote the physical and psychological safety of workers. To test domain specificity between conceptually related workplace climates and relevant workplace hazards. Data were collected from 368 persons employed in various industries and descriptive statistics were calculated for all study variables. Correlational and relative weights analyses were used to test for domain specificity. The three climate domains were similarly predictive of most workplace hazards, regardless of domain specificity. This study suggests that the three climate domains share a common higher order construct that may predict relevant workplace hazards better than any of the scales alone.

Minimal Marking: A Success Story

Directory of Open Access Journals (Sweden)

Anne McNeilly

2014-11-01

Full Text Available The minimal-marking project conducted in Ryerson’s School of Journalism throughout 2012 and early 2013 resulted in significantly higher grammar scores in two first-year classes of minimally marked university students when compared to two traditionally marked classes. The “minimal-marking” concept (Haswell, 1983, which requires dramatically more student engagement, resulted in more successful learning outcomes for surface-level knowledge acquisition than the more traditional approach of “teacher-corrects-all.” Results suggest it would be effective, not just for grammar, punctuation, and word usage, the objective here, but for any material that requires rote-memory learning, such as the Associated Press or Canadian Press style rules used by news publications across North America.

Male and female meadow voles Microtus pennsylvanicus respond differently to scent marks from the top- middle-, and bottom-scent donors of an over-mark

Directory of Open Access Journals (Sweden)

Michael H. FERKIN, Nicholas J. HOBBS, Benjamin D. FERKIN, Adam C.FERKIN, Daniel A. FERKIN

2011-08-01

Full Text Available Previous studies have shown that individuals responded preferentially to the mark of the top-scent donor relative to that of the bottom-scent donor of an over-mark. However, terrestrial mammals are likely to encounter over-marks consisting of the scent marks of more than two same-sex conspecifics in the intersections of runways, near the nests of sexually receptive female conspecifics, and inside and along the borders of the territories of conspecifics. We determined how meadow voles, Microtus pennsylvanicus, respond to the marks of the top-, middle-, and bottom-scent donors of an over-mark. We tested the hypothesis that voles exposed to an over-mark will respond preferentially to the scent marks that were deposited more recently, the scent marks that were on top or near the top of the over-mark, compared to the scent marks that were deposited earlier or near the bottom of the over-mark. Voles spent more time investigating the mark of the top-scent donor than that of the either the middle- or bottom-scent donor. However, males but not female voles spent more time investigating the middle-scent mark than the bottom-scent mark. We also tested the hypothesis that voles evaluate and respond to over-marks differently from single scent marks. Voles spent more time investigating the marks of the top-, middle-, and bottom-scent donors compared to scent marks that were not part of the over-mark. Voles can distinguish among the overlapping scent marks of three scent donors and sex differences exist in the values they appear to attach to each of these scent marks [Current Zoology 57 (4: 441–448, 2011].

Adsorption and Detection of Hazardous Trace Gases by Metal-Organic Frameworks.

Science.gov (United States)

Woellner, Michelle; Hausdorf, Steffen; Klein, Nicole; Mueller, Philipp; Smith, Martin W; Kaskel, Stefan

2018-06-19

The quest for advanced designer adsorbents for air filtration and monitoring hazardous trace gases has recently been more and more driven by the need to ensure clean air in indoor, outdoor, and industrial environments. How to increase safety with regard to personal protection in the event of hazardous gas exposure is a critical question for an ever-growing population spending most of their lifetime indoors, but is also crucial for the chemical industry in order to protect future generations of employees from potential hazards. Metal-organic frameworks (MOFs) are already quite advanced and promising in terms of capacity and specific affinity to overcome limitations of current adsorbent materials for trace and toxic gas adsorption. Due to their advantageous features (e.g., high specific surface area, catalytic activity, tailorable pore sizes, structural diversity, and range of chemical and physical properties), MOFs offer a high potential as adsorbents for air filtration and monitoring of hazardous trace gases. Three advanced topics are considered here, in applying MOFs for selective adsorption: (i) toxic gas adsorption toward filtration for respiratory protection as well as indoor and cabin air, (ii) enrichment of hazardous gases using MOFs, and (iii) MOFs as sensors for toxic trace gases and explosives. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Evaluation of copper for divider subassembly in MCO Mark IA and Mark IV scrap fuel baskets

International Nuclear Information System (INIS)

Graves, C.E.

1997-01-01

The K Basin Spent Nuclear Fuel (SNF) Project Multi-Canister Overpack (MCO) subprojection eludes the design and fabrication of a canister that will be used to confine, contain, and maintain fuel in a critically safe array to enable its removal from the K Basins, vacuum drying, transport, staging, hot conditioning, and interim storage (Goldinann 1997). Each MCO consists of a shell, shield plug, fuel baskets (Mark IA or Mark IV), and other incidental equipment. The Mark IA intact and scrap fuel baskets are a safety class item for criticality control and components necessary for criticality control will be constructed from 304L stainless steel. It is proposed that a copper divider subassembly be used in both Mark IA and Mark IV scrap baskets to increase the safety basis margin during cold vacuum drying. The use of copper would increase the heat conducted away from hot areas in the baskets out to the wall of the MCO by both radiative and conductive heat transfer means. Thus copper subassembly will likely be a safety significant component of the scrap fuel baskets. This report examines the structural, cost and corrosion consequences associated with using a copper subassembly in the stainless steel MCO scrap fuel baskets

Selected topics in e+e- physics

International Nuclear Information System (INIS)

Sau Lan Wu

1981-01-01

Selected topics of recent experimental results from the high-energy electron-positron storage rings are presented. The topics include some of the tau and charm physics from SPEAR, the upsilon physics from DORIS and CESR, and the γγ physics and quark and gluon physics from the PLUTO and TASSO Collaborations at PETRA. Related data from the JADE and MARK J Collaborations at PETRA are discussed in separated papers at this school. (orig.)

Large-scale experiments for the vulnerability analysis of buildings impacted and intruded by fluviatile torrential hazard processes

Science.gov (United States)

Sturm, Michael; Gems, Bernhard; Fuchs, Sven; Mazzorana, Bruno; Papathoma-Köhle, Maria; Aufleger, Markus

2016-04-01

In European mountain regions, losses due to torrential hazards are still considerable high despite the ongoing debate on an overall increasing or decreasing trend. Recent events in Austria severely revealed that due to technical and economic reasons, an overall protection of settlements in the alpine environment against torrential hazards is not feasible. On the side of the hazard process, events with unpredictable intensities may represent overload scenarios for existent protection structures in the torrent catchments. They bear a particular risk of significant losses in the living space. Although the importance of vulnerability is widely recognised, there is still a research gap concerning its assessment. Currently, potential losses at buildings due to torrential hazards and their comparison with reinstatement costs are determined by the use of empirical functions. Hence, relations of process intensities and the extent of losses, gathered by the analysis of historic hazard events and the information of object-specific restoration values, are used. This approach does not represent a physics-based and integral concept since relevant and often crucial processes, as the intrusion of the fluid-sediment-mixture into elements at risk, are not considered. Based on these findings, our work is targeted at extending these findings and models of present risk research in the context of an integral, more physics-based vulnerability analysis concept. Fluviatile torrential hazard processes and their impacts on the building envelope are experimentally modelled. Material intrusion processes are thereby explicitly considered. Dynamic impacts are gathered quantitatively and spatially distributed by the use of a large set of force transducers. The experimental tests are accomplished with artificial, vertical and skewed plates, including also openings for material intrusion. Further, the impacts on specific buildings within the test site of the work, the fan apex of the Schnannerbach

The drought risk of maize in the farming-pastoral ecotone in Northern China based on physical vulnerability assessment

Science.gov (United States)

Wang, Zhiqiang; Jiang, Jingyi; Ma, Qing

2016-12-01

Climate change is affecting every aspect of human activities, especially the agriculture. In China, extreme drought events caused by climate change have posed a great threat to food safety. In this work we aimed to study the drought risk of maize in the farming-pastoral ecotone in Northern China based on physical vulnerability assessment. The physical vulnerability curve was constructed from the relationship between drought hazard intensity index and yield loss rate. The risk assessment of agricultural drought was conducted from the drought hazard intensity index and physical vulnerability curve. The probability distribution of drought hazard intensity index decreased from south-west to north-east and increased from south-east to north-west along the rainfall isoline. The physical vulnerability curve had a reduction effect in three parts of the farming-pastoral ecotone in Northern China, which helped to reduce drought hazard vulnerability on spring maize. The risk of yield loss ratio calculated based on physical vulnerability curve was lower compared with the drought hazard intensity index, which suggested that the capacity of spring maize to resist and adapt to drought is increasing. In conclusion, the farming-pastoral ecotone in Northern China is greatly sensitive to climate change and has a high probability of severe drought hazard. Risk assessment of physical vulnerability can help better understand the physical vulnerability to agricultural drought and can also promote measurements to adapt to climate change.

Current status of elementary particle physics

International Nuclear Information System (INIS)

Okun', L.B.

1998-01-01

A brief review is given of the state-of-the art in elementary particle physics based on the talk of the same title given on January 22, 1998, at the seminar marking the 90th birth anniversary of L.D. Landau. (The seminar was hosted by the P.L. Kapitza Institute for Physical Problems in cooperation with the L.D. Landau Institute for Theoretical Physics)

Hazard management at the workplace

International Nuclear Information System (INIS)

Hasfazilah Hassan; Azimawati Ahmad; Syed Asraf Fahlawi Wafa S M Ghazi; Hairul Nizam Idris

2005-01-01

Failure to ensure health and safety environment at workplace will cause an accident involving loss to the time, human resource, finance and for the worse case effect the moral value of an organization. If we go through to the cause of the accident, it is impossible to have a totally safety workplace. It is because every process in work activities has it own hazard elements. The purpose of this paper is to discuss the best action to prevent from the hazard with a comprehensive and effectiveness hazard management. Hazard management is the one of the pro-active hazard control. With this we manage to identify and evaluate the hazard and control the hazard risk. Therefore, hazard management should be screened constantly and continuously to make sure work hazard always in control. (Author)

DOE Hazardous Waste Program

International Nuclear Information System (INIS)

Eyman, L.D.; Craig, R.B.

1985-01-01

The goal of the DOE Hazardous Waste Program is to support the implementation and improvement of hazardous-chemical and mixed-radioactive-waste management such that public health, safety, and the environment are protected and DOE missions are effectively accomplished. The strategy for accomplishing this goal is to define the character and magnitude of hazardous wastes emanating from DOE facilities, determine what DOE resources are available to address these problems, define the regulatory and operational constraints, and develop programs and plans to resolve hazardous waste issues. Over the longer term the program will support the adaptation and application of technologies to meet hazardous waste management needs and to implement an integrated, DOE-wide hazardous waste management strategy. 1 reference, 1 figure

An analysis of hospital brand mark clusters.

Science.gov (United States)

Vollmers, Stacy M; Miller, Darryl W; Kilic, Ozcan

2010-07-01

This study analyzed brand mark clusters (i.e., various types of brand marks displayed in combination) used by hospitals in the United States. The brand marks were assessed against several normative criteria for creating brand marks that are memorable and that elicit positive affect. Overall, results show a reasonably high level of adherence to many of these normative criteria. Many of the clusters exhibited pictorial elements that reflected benefits and that were conceptually consistent with the verbal content of the cluster. Also, many clusters featured icons that were balanced and moderately complex. However, only a few contained interactive imagery or taglines communicating benefits.

Uses of probabilistic estimates of seismic hazard and nuclear power plants in the US

International Nuclear Information System (INIS)

Reiter, L.

1983-01-01

The use of probabilistic estimates is playing an increased role in the review of seismic hazard at nuclear power plants. The NRC Geosciences Branch emphasis has been on using these estimates in a relative rather than absolute manner and to gain insight on other approaches. Examples of this use include estimates to determine design levels, to determine equivalent hazard at different sites, to help define more realistic seismotectonic provinces, and to assess implied levels of acceptable risk using deterministic methods. Increased use of probabilistic estimates is expected. Probabilistic estimates of seismic hazard have a potential for misuse, however, and their successful integration into decision making requires they not be divorced from physical insight and scientific intuition

Glass marking with diode-pumped Nd:YLF laser; Handotai reiki Nd:YLF laser ni yoru glass marking

Energy Technology Data Exchange (ETDEWEB)

Sakai, F.; Hayashi, K. [Sumitomo Heavy Industries, Ltd., Tokyo (Japan)

1996-08-20

The compact marking system based on a beam scanning system in which the fourth harmonic (FHG: 262 nm in wavelength) of a diode-pumped Nd:YLF (Nd:LiYf4) laser is used for the source of ultraviolet light is described. The result of application to the glass marking that caused a problem due to the generation of cracks is also explained. The machining characteristics significantly vary depending on the type of glass. During actual marking, sample processing must be beforehand carried out to optimize the processing conditions after confirming that there is no problem in practical use. For marking on the glass used for liquid-crystal board, it is valid to improve the density of a dot and increase the number of shots per dot for obtaining high visibility. However, cracks may occur in the clearance of each dot because of the thermal effect. Therefore, the processing conditions must be optimized according to the glass type and crack generation state. The generation of cracks can be suppressed by setting the processing conditions to the optimum level. As a result, satisfactory marking is obtained. 8 refs., 6 figs.

[Experimental research in high energy physics: Final technical progress report, 1986--1992

International Nuclear Information System (INIS)

1992-01-01

This is the closeout report for DOE supported research in high energy physics for the period 1986--1992, under contract award AT03-86ER40249 at the Santa Cruz Institute for Particle Physics (SCIPP) at U.C. Santa Cruz. The research during this period consisted primarily of the following: Data taking with the MARK II detector at the SLC at SLAC and construction of a silicon vertex detector for the MARK II. This effort included substantial work on commissioning of the SLC accelerator. Preparation of the SLD experiment for the SLC, and initial data taking with this experiment. Participation in the ALEPH physics program at LEP at CERN in Geneva, with an emphasis on its silicon vertex detector. Analysis of data collected with the MARK III experiment at the SPEAR accelerator at SLAC. Electronics development for the leading proton spectrometer for the ZEUS experiment at DESY in Hamburg. Design, testing and physics studies for a silicon tracker for the SSC. Theoretical physics program emphasizing phenomenology, Higgs physics, supersymmetry, and some issues in cosmology

Relative Hazard Calculation Methodology

International Nuclear Information System (INIS)

DL Strenge; MK White; RD Stenner; WB Andrews

1999-01-01

The methodology presented in this document was developed to provide a means of calculating the RH ratios to use in developing useful graphic illustrations. The RH equation, as presented in this methodology, is primarily a collection of key factors relevant to understanding the hazards and risks associated with projected risk management activities. The RH equation has the potential for much broader application than generating risk profiles. For example, it can be used to compare one risk management activity with another, instead of just comparing it to a fixed baseline as was done for the risk profiles. If the appropriate source term data are available, it could be used in its non-ratio form to estimate absolute values of the associated hazards. These estimated values of hazard could then be examined to help understand which risk management activities are addressing the higher hazard conditions at a site. Graphics could be generated from these absolute hazard values to compare high-hazard conditions. If the RH equation is used in this manner, care must be taken to specifically define and qualify the estimated absolute hazard values (e.g., identify which factors were considered and which ones tended to drive the hazard estimation)

Civilsamfundets ABC: M for Marked

DEFF Research Database (Denmark)

Lund, Anker Brink; Meyer, Gitte

2016-01-01

Bogstaveligt talt: Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til M for Marked.......Bogstaveligt talt: Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til M for Marked....

19 CFR 134.43 - Methods of marking specific articles.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Methods of marking specific articles. 134.43...; DEPARTMENT OF THE TREASURY COUNTRY OF ORIGIN MARKING Method and Location of Marking Imported Articles § 134.43 Methods of marking specific articles. (a) Marking previously required by certain provisions of the...

Lessons learned : pavement marking warranty contract.

Science.gov (United States)

2013-12-01

In 2012, UDOT implemented a performance-based warranty on a portion of an I-15 pavement marking : project. The awarded contract requested a contractor warranty on the implemented markings for a total : duration of six years. This is the first time th...

The Hazard Analysis and Critical Control Points (HACCP) generic model for the production of Thai fermented pork sausage (Nham).

Science.gov (United States)

Paukatong, K V; Kunawasen, S

2001-01-01

Nham is a traditional Thai fermented pork sausage. The major ingredients of Nham are ground pork meat and shredded pork rind. Nham has been reported to be contaminated with Salmonella spp., Staphylococcus aureus, and Listeria monocytogenes. Therefore, it is a potential cause of foodborne diseases for consumers. A Hazard Analysis and Critical Control Points (HACCP) generic model has been developed for the Nham process. Nham processing plants were observed and a generic flow diagram of Nham processes was constructed. Hazard analysis was then conducted. Other than microbial hazards, the pathogens previously found in Nham, sodium nitrite and metal were identified as chemical and physical hazards in this product, respectively. Four steps in the Nham process have been identified as critical control points. These steps are the weighing of the nitrite compound, stuffing, fermentation, and labeling. The chemical hazard of nitrite must be controlled during the weighing step. The critical limit of nitrite levels in the Nham mixture has been set at 100-200 ppm. This level is high enough to control Clostridium botulinum but does not cause chemical hazards to the consumer. The physical hazard from metal clips could be prevented by visual inspection of every Nham product during stuffing. The microbiological hazard in Nham could be reduced in the fermentation process. The critical limit of the pH of Nham was set at lower than 4.6. Since this product is not cooked during processing, finally, educating the consumer, by providing information on the label such as "safe if cooked before consumption", could be an alternative way to prevent the microbiological hazards of this product.

Particle physics: a valuable driver of innovation in medicine… and physics

CERN Multimedia

2012-01-01

This year marks the 10th anniversary of the European Network for Light Ion Therapy (ENLIGHT), which is a good occasion a look back over the important contributions particle physics has made to medicine over the years. It’s hard to know exactly where to start, but since this year also marks the 20th anniversary of Georges Charpak’s Nobel Prize, that seems as good a place as any.   Charpak’s prize was a long time coming. It was awarded for “his invention and development of particle detectors, in particular the multiwire proportional chamber” in 1968. Over the following years, these devices transformed particle physics, allowing particle collisions to be recorded electronically instead of optically, and they led to a wide range of electronic particle detection techniques in use today. All this was duly noted by the Nobel committee, which also pointed out Charpak’s energy in applying the technology to medicine. Today, Charpak-like detec...

Minnesota Local Agency Pavement Marking : Mining Existing Data

Science.gov (United States)

2017-11-01

Pavement marking is important for safety. Maximizing pavement marking performance in terms of increased retroreflectivity, within limited budget constraints, allows agencies to make better decisions toward providing more effective pavement marking pe...

Measures of Physical and Mental Independence Among HIV-Positive Individuals: Impact of Substance Use Disorder.

Science.gov (United States)

Christensen, Bianca; Qin, Zijian; Byrd, Desiree A; Yu, Fang; Morgello, Susan; Gelman, Benjamin B; Moore, David J; Grant, Igor; Singer, Elyse J; Fox, Howard S; Baccaglini, Lorena

2017-10-01

With the transition of HIV infection from an acute to a chronic disease after the introduction of antiretroviral medications, there has been an increased focus on long-term neurocognitive and other functional outcomes of HIV patients. Thus, we assessed factors, particularly history of a substance use disorder, associated with time to loss of measures of physical or mental independence among HIV-positive individuals. Data were obtained from the National NeuroAIDS Tissue Consortium. Kaplan-Meier and Cox proportional hazards regression analyses were used to estimate the time since HIV diagnosis to loss of independence, and to identify associated risk factors. HIV-positive participants who self-identified as physically (n = 698) or mentally (n = 616) independent on selected activities of daily living at baseline were eligible for analyses. A history of substance use disorder was associated with a higher hazard of loss of both physical and mental independence [adjusted hazard ratio (HR) = 1.71, 95% confidence interval (95% CI): 1.07-2.78; adjusted HR = 1.67, 95% CI: 1.11-2.52, respectively]. After adjusting for substance use disorder and other covariates, older age at diagnosis and female gender were associated with higher hazards of loss of both physical and mental independence, non-white participants had higher hazards of loss of physical independence, whereas participants with an abnormal neurocognitive diagnosis and fewer years of education had higher hazards of loss of mental independence. In summary, history of substance use disorder was associated with loss of measures of both physical and mental independence. The nature of this link and the means to prevent such loss of independence need further investigation.

Mark Twain: inocente ou pecador? = Mark Twain: innocent or sinner?

Directory of Open Access Journals (Sweden)

Heloisa Helou Doca

2009-01-01

Full Text Available A leitura cuidadosa do texto do “Tratado de Paris”, em 1900, leva Mark Twain a concluir que a intenção política norte-americana era, claramente, a de subjugação. Declara-se, abertamente, antiimperialista, nesse momento, apesar das inúmeras críticasrecebidas por antagonistas políticos que defendiam o establishment dos Estados Unidos. Após viajar para a Europa e Oriente, em 1867, como correspondente do jornal Daily Alta Califórnia, Mark Twain publica, em 1869, seu relato de viagem, The Innocents Abroad or TheNew Pilgrim’s Progress. Nosso estudo demonstra que o autor, apesar das diversas máscaras usadas em seus relatos, narra histórias, culturas e tradições, tanto da Europa quanto do Oriente, já com os olhos bem abertos pelo viés antiimperialista. Faz uso da paródia, sátira, ironia e humor para dessacralizar impérios, monarcas e a Igreja que subjugavam os mais fracos, iluminando, desde então, os estudos sobre culturas. Nosso estudo, outrossim, faz uma reflexão sobre cultura, tradição e o olhar do viajante, justificando o “olhar inocente” do narrador em seu relato.After carefully reading the Treaty of Paris in 1900, Mark Twain concluded that the goal of U.S. policy was clearly one ofsubjugation. He openly declared himself an anti-imperialist at that time, in spite of the numerous criticisms he received from political opponents who supported the United States status quo. After traveling to Europe and the East in 1867 as a correspondent for The DailyAlta California newspaper, Mark Twain published his travel report, The Innocents Abroad or The New Pilgrim’s Progress in 1869. Our study demonstrates that the author, in spite of using different guises in his reports, narrated histories, cultures and traditions – from both Europe and the East – with a viewpoint already imbued by his anti-imperialistic ideals. Twain made use of parody, satire, irony and humor within his texts in order to desecrate empires,monarchs and

Association of baseline level of physical activity and its temporal changes with incident hypertension and diabetes mellitus.

Science.gov (United States)

Lee, Jong-Young; Ryu, Seungho; Sung, Ki-Chul

2018-01-01

Background The association between baseline and temporal changes in physical activity and incident hypertension or diabetes mellitus in initially non-hypertensive or non-diabetic subjects is rarely known. Methods Among individuals who underwent consecutive comprehensive health screenings, their physical activity level was measured using a self-reported international physical activity questionnaire. First, subjects were classified into four categories: no regular physical activity with a sedentary lifestyle; minimal physical activity (diabetes mellitus and arterial hypertension, respectively. After a multivariate adjustment, sufficient baseline physical activity was associated with significantly lower risk for incident hypertension (hazard ratio 0.89; 95% confidence interval (CI) 0.81 to 0.97), but the difference was not significant, and showed a lower trend in diabetes mellitus incidence (hazard ratio 0.87; 95% CI 0.69 to 1.04) in reference to no regular physical activity group. Regardless of the baseline physical activity level, subjects with a temporal increase in physical activity showed significantly decreased risk for incident hypertension (hazard ratio 0.93; 95% CI 0.87 to 0.99) and diabetes mellitus (hazard ratio 0.83; 95% CI 0.74 to 0.92) compared with those with a temporal decrease in their physical activity level. Conclusion Both sufficient baseline physical activity level and its temporal increase were associated with a lower risk of incident hypertension and diabetes mellitus in a large, relatively healthy, cohort.

Do employers prefer Mark over Mohammed?

NARCIS (Netherlands)

Iris Andriessen; Eline Nievers; Laila Faulk; Jaco Dagevos

2010-01-01

Original title: Liever Mark dan Mohammed? Does Mohammed have less chance of succeeding on the Dutch labour market than Mark, even though they both have the same qualifications and work experience? And are employers less friendly towards Sonaya than Paula? This study investigates the

Globe of Natural Hazard - A new assessment tool for risk managers

Science.gov (United States)

Siebert, A. C.

2009-04-01

A large number of tropical cyclones and the earthquake in Sichuan made 2008 one of the most devastating years on record. Throughout the world, more than 220,000 people died as a result of natural catastrophes this year. Overall losses totaled some US 200bn (2007: US 82bn). Insured losses in 2008 rose to US 45bn, about 50% higher than in the previous year. Mainly driven by high losses from weather-related natural catastrophes, 2008 was - on the basis of figures adjusted for inflation - even the third most expensive year on record for the insurance industry, exceeded only by the hurricane year of 2005 and by 1995, the year of the Kobe earthquake. Munich Re, a worldwide operating reinsurance company, is a world leader in terms of investigating risks from natural hazards of all kinds. 2008 has again shown the insurance industry how important it is to analyse risks like natural hazards and climate change in all their facets and to manage the insurance business accordingly. An excellent example of the wealth of knowledge Munich Re has developed in natural hazard assessment is the DVD "Globe of Natural Hazards". It combines the geoscientific data and findings Munich Re has accumulated over a period of 35 years. First devised as a wall-map in 1978, the product has established itself as a standard work for the identification, exposure assessment and risk management of natural hazards. Over 80,000 copies of the CD-ROM version of 2000 have been provided to clients - a mark achieved by no other service product in Munich Re's history. Since the beginning of 2009, the fully updated fourth-generation version has been available. The bilingual DVD (German and English) shows natural hazards and climate effects at a glance: the global maps are presented on a 3D globe, underlaid with satellite images. The hazard complexes of hail, tornado and winter storms have been completely revised and flood incorporated as a new hazard. Users can intuitively home in on and enlarge any location on

Hooked on a feeling: emotional labor as an occupational hazard of the post-industrial age.

Science.gov (United States)

Andrews, Bonnie K; Karcz, Susan; Rosenberg, Beth

2008-01-01

Emotional labor is a subtle but serious occupational hazard that is likely to spread rapidly as the global service economy continues to grow. Emotional labor requires more than just acting friendly and being helpful to customers; the worker must manage his or her emotions to create a company-dictated experience for customers. The practice of emotional labor in an unsupportive work environment produces work-related stress, which has a wide range of potentially serious health effects. Though many employers do not acknowledge the existence of emotional labor, it is a real occupational hazard that may generate life-altering effects on physical and emotional health. While no official regulations or identification standards specify emotional labor as an occupational hazard, some guidelines exist regarding its outcome: occupational stress. Emotional labor should be recognized as an occupational hazard by the Occupational Safety and Health Administration (OSHA), but this hazard does not lend itself to regulation through standards. The business culture that demands its performance is questioned.

Analysis of Complex Marine Hazards on the Romanian Black Sea Shelf Using Combined Geophysical Methods

Science.gov (United States)

Samoila, I. V.; Radulescu, V.; Moise, G.; Diaconu, A.; Radulescu, R.

2017-12-01

Combined geophysical acquisition technologies including High Resolution 2D Seismic (HR2D), Multi-Beam Echo-Sounding (MBES), Sub-Bottom Profiling (SBP) and Magnetometry were used in the Western Black Sea (offshore Romania) to identify possible geohazards, such as gas escaping surface sediments and tectonic hazard areas up to 1 km below the seafloor. The National Project was funded by the Research and Innovation Ministry of Romania, and has taken place over 1.5 years with the purpose of creating risk maps for the surveyed pilot area. Using an array of geophysical methods and creating a workflow to identify geohazard susceptible areas on the Romanian Black Sea continental shelf is important and beneficial for future research projects. The SBP and MBES data show disturbed areas that can be interpreted as gas escapes on the surface of the seafloor, and some escapes were confirmed on the HR2D profiles. Shallow gas indicators like gas chimneys and acoustic blanking are usually delimited by vertical, sub-vertical and/or quasi-horizontal faults that mark possible hazard areas on shallow sedimentary sections. Interpreted seismic profiles show three main markers: one delimiting the Pliocene-Quaternary boundary and two for the Miocene (Upper and Lower). Vertical and quasi-horizontal faults are characteristic for the Upper Miocene, while the Lower Miocene has NW-SE horizontal faults. Faults and possible hazard areas were marked on seismic sections and were further correlated with the MBES, SBP, Magnetometry and previously recorded data, such as earthquake epicenters scattered offshore in the Western Black Sea. The main fault systems likely to cause those earthquakes also aid the migration of gas if the faults are not sealed. We observed that the gas escapes were correlated with faults described on the recent seismic profiles. Mapping hazard areas will have an important contribution to better understand the recent evolution of the Western Black Sea basin but also for projecting

[Werkgartner's muzzle imprint mark--a literature study].

Science.gov (United States)

Geserick, Gunther; Vendura, Klaus; Wirth, Ingo

2009-01-01

Since Werkgartner described and correctly interpreted the muzzle imprint mark around the gunshot entrance wound in 1922, this finding has been generally accepted as a sign of a contact shot. In further studies, it could finally be clarified that the muzzle imprint mark is caused by the expansive power of the powder gases with pressure on and abrasion of the skin at the muzzle (weapon imprint). Its shape depends on the firearm, the ammunition and the anatomical conditions, but does not require a bullet. Examinations under a magnifying glass microscope and histological investigations can complete the macroscopic findings. Occasionally, the muzzle imprint mark requires a certain "drying period" in order to become clearly visible. In rare cases, muzzle imprint marks also form on textiles perforated by the projectile. Characteristically shaped muzzled imprint marks can provide clues to the type of the firearm and its position at the time of discharge.

Radiation hazards

International Nuclear Information System (INIS)

Rausch, L.

1979-01-01

On a scientific basis and with the aid of realistic examples, the author gives a popular introduction to an understanding and judgment of the public discussion over radiation hazards: Uses and hazards of X-ray examinations, biological radiation effects, civilisation risks in comparison, origins and explanation of radiation protection regulations. (orig.) [de

Categorization framework to aid hazard identification of nanomaterials

DEFF Research Database (Denmark)

Hansen, Steffen Foss; Larsen, Britt Hvolbæk; Olsen, Stig Irving

2007-01-01

and propose a categorization framework that enables scientists and regulators to identify the categories of nanomaterials systematically. The framework is applied to a suggested hazard identification approach aimed at identifying causality between inherent physical and chemical properties and observed adverse...... of the nanoparticles studied and it was not possible to link specific properties of nanoparticles to the observed effects. Our study shows that future research strategies must have a strong focus on characterization of the nanoparticles tested....

19 CFR 11.9 - Special marking on certain articles.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Special marking on certain articles. 11.9 Section... OF THE TREASURY PACKING AND STAMPING; MARKING Marking § 11.9 Special marking on certain articles. (a... of additional U.S. Note 4, Chapter 91. If any article so required to be marked is found not to be...

Intelligent systems for remote decommissioning in hazardous environments

International Nuclear Information System (INIS)

Drotning, W.D.; Bennett, P.C.

1991-01-01

This paper reports on investigation of advanced handling technologies utilizing intelligent machines being supported jointly by the U.S. Department of Energy Offices of Civilian Radioactive Waste Management and Environmental Restoration and Waste Management for automation of transportation package handling operations at nuclear facilities and of nuclear waste site remediation efforts. Handling operation requirements include identification, location, and health physics operations, followed by bolting/unbolting operations and package disassembly. To accommodate these operations and the diversity of packages, fast model-based automated programming and force feedback control of a robotic control has been demonstrated for application to hazardous material cleanup. In this application, a graphical interface is used to simulate and evaluate operator-controlled motions and provide telerobotic control of the system. Remote automated handling technologies developed through these programs have the potential to decrease worker exposure and increase efficiency during decommissioning activities in hazardous environments

Natural and Man-Made Hazards in the Cayman Islands

Science.gov (United States)

Novelo-Casanova, D. A.; Suarez, G.

2010-12-01

Located in the western Caribbean Sea to the northwest of Jamaica, the Cayman Islands are a British overseas territory comprised of three islands: Grand Cayman, Cayman Brac, and Little Cayman. These three islands occupy around 250 km2 of land area. In this work, historical and recent data were collected and classified to identify and rank the natural and man-made hazards that may potentially affect the Cayman Islands and determine the level of exposure of Grand Cayman to these events. With this purpose, we used the vulnerability assessment methodology developed by the North Caroline Department of Environment and Natural Resources. The different degrees of physical vulnerability for each hazard were graphically interpreted with the aid of maps using a relative scoring system. Spatial maps were generated showing the areas of different levels of exposure to multi-hazards. The more important natural hazard to which the Cayman Islands are exposed is clearly hurricanes. To a lesser degree, the islands may be occasionally exposed to earthquakes and tsunamis. Explosions or leaks of the Airport Texaco Fuel Depot and the fuel pipeline at Grand Cayman are the most significant man-made hazards. Our results indicate that there are four areas in Grand Cayman with various levels of exposure to natural and man-made hazards: The North Sound, Little Sound and Eastern West Bay (Area 1) show a very high level of exposure; The Central Mangroves, Central Bodden Town, Central George Town and the West Bay (Area 2) have high level of exposure; The Northwestern West Bay, Western Georgetown-Bodden Town, and East End-North Side (Area 3) are under moderate levels of exposure. The remainder of the island shows low exposure (Area 4). It is important to underline that this study presents a first evaluation of the main natural and man-made hazards that may affect the Cayman Islands. The maps generated will be useful tools for emergency managers and policy developers and will increase the overall

Studies Involving Immobilization Of Hazardous Wastes In Cement-ilmenite Matrix

International Nuclear Information System (INIS)

El-Dakrory, A.M.; Sayed, M.S.; Adham, K.

1999-01-01

Ilmenite was added to Ordinary Portland Cement to Modify the characteristic properties of the matrix as density, compressive strength and thermal stability . Coal tar and radiocesium were solidified as hazardous waste in cement-ilmenite matrix. The physical properties as density, sitting times and porosity were studied. The mechanical properties as compressive strength values and the chemical properties as leaching were measured

Hazard screening application guide

International Nuclear Information System (INIS)

1992-06-01

The basic purpose of hazard screening is to group precesses, facilities, and proposed modifications according to the magnitude of their hazards so as to determine the need for and extent of follow on safety analysis. A hazard is defined as a material, energy source, or operation that has the potential to cause injury or illness in human beings. The purpose of this document is to give guidance and provide standard methods for performing hazard screening. Hazard screening is applied to new and existing facilities and processes as well as to proposed modifications to existing facilities and processes. The hazard screening process evaluates an identified hazards in terms of the effects on people, both on-site and off-site. The process uses bounding analyses with no credit given for mitigation of an accident with the exception of certain containers meeting DOT specifications. The process is restricted to human safety issues only. Environmental effects are addressed by the environmental program. Interfaces with environmental organizations will be established in order to share information

Software safety hazard analysis

International Nuclear Information System (INIS)

Lawrence, J.D.

1996-02-01

Techniques for analyzing the safety and reliability of analog-based electronic protection systems that serve to mitigate hazards in process control systems have been developed over many years, and are reasonably well understood. An example is the protection system in a nuclear power plant. The extension of these techniques to systems which include digital computers is not well developed, and there is little consensus among software engineering experts and safety experts on how to analyze such systems. One possible technique is to extend hazard analysis to include digital computer-based systems. Software is frequently overlooked during system hazard analyses, but this is unacceptable when the software is in control of a potentially hazardous operation. In such cases, hazard analysis should be extended to fully cover the software. A method for performing software hazard analysis is proposed in this paper

Topography measurements and applications in ballistics and tool mark identifications*

Science.gov (United States)

Vorburger, T V; Song, J; Petraco, N

2016-01-01

The application of surface topography measurement methods to the field of firearm and toolmark analysis is fairly new. The field has been boosted by the development of a number of competing optical methods, which has improved the speed and accuracy of surface topography acquisitions. We describe here some of these measurement methods as well as several analytical methods for assessing similarities and differences among pairs of surfaces. We also provide a few examples of research results to identify cartridge cases originating from the same firearm or tool marks produced by the same tool. Physical standards and issues of traceability are also discussed. PMID:27182440

49 CFR 178.338-18 - Marking.

Science.gov (United States)

2010-10-01

... pounds. (7) Maximum design density of lading (Max. Lading density), in pounds per gallon. (8) Material... cryogenic liquid, in hours, and the name of that cryogenic liquid (MRHT __ hrs, name of cryogenic liquid). Marked rated holding marking for additional cryogenic liquids may be displayed on or adjacent to the...

7 CFR 956.162 - Container markings.

Science.gov (United States)

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Container markings. 956.162 Section 956.162... WALLA VALLEY OF SOUTHEAST WASHINGTON AND NORTHEAST OREGON Rules and Regulations § 956.162 Container markings. Effective April 15, 1997, no handler shall ship any container of Walla Walla Sweet Onions except...

Differential Signature of the Centrosomal MARK4 Isoforms in Glioma

Directory of Open Access Journals (Sweden)

Ivana Magnani

2011-01-01

Full Text Available Background: MAP/microtubule affinity-regulating kinase 4 (MARK4 is a serine-threonine kinase expressed in two spliced isoforms, MARK4L and MARK4S, of which MARK4L is a candidate for a role in neoplastic transformation. Methods: We performed mutation analysis to identify sequence alterations possibly affecting MARK4 expression. We then investigated the MARK4L and MARK4S expression profile in 21 glioma cell lines and 36 tissues of different malignancy grades, glioblastoma-derived cancer stem cells (GBM CSCs and mouse neural stem cells (NSCs by real-time PCR, immunoblotting and immunohistochemistry. We also analyzed the sub-cellular localisation of MARK4 isoforms in glioma and normal cell lines by immunofluorescence. Results: Mutation analysis rules out sequence variations as the cause of the altered MARK4 expression in glioma. Expression profiling confirms that MARK4L is the predominant isoform, whereas MARK4S levels are significantly decreased in comparison and show an inverse correlation with tumour grade. A high MARK4L/MARK4S ratio also characterizes undifferentiated cells, such as GBM CSCs and NSCs. Accordingly, only MARK4L is expressed in brain neurogenic regions. Moreover, while both MARK4 isoforms are localised to the centrosome and midbody in glioma and normal cells, the L isoform exhibits an additional nucleolar localisation in tumour cells. Conclusions: The observed switch towards MARK4L suggests that the balance between the MARK4 isoforms is carefully guarded during neural differentiation but may be subverted in gliomagenesis. Moreover, the MARK4L nucleolar localisation in tumour cells features this MARK4 isoform as a nucleolus-associated tumour marker.

Marks on the petroleum fiscality

International Nuclear Information System (INIS)

2007-02-01

This document offers some marks on the petroleum fiscality in France: the taxes as the 'accises' and the 'TVA', the part of the taxes in the sale price at the service station, the comparison with other countries of Europe, the tax revenues and the Government budget. It provides also marks on the fuels prices formation (margins), the world petroleum markets (supply and demand) and the part of the petroleum companies on the petroleum market. (A.L.B.)

14 CFR 1203.501 - Applying derivative classification markings.

Science.gov (United States)

2010-01-01

... INFORMATION SECURITY PROGRAM Derivative Classification § 1203.501 Applying derivative classification markings. Persons who apply derivative classification markings shall: (a) Observe and respect original... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Applying derivative classification markings...

Job Hazard Analysis

National Research Council Canada - National Science Library

1998-01-01

.... Establishing proper job procedures is one of the benefits of conducting a job hazard analysis carefully studying and recording each step of a job, identifying existing or potential job hazards...

Aluminum-Oxide Temperatures on the Mark VB, VE, VR, 15, and Mark 25 Assemblies

International Nuclear Information System (INIS)

Aleman, S.E.

2001-01-01

The task was to compute the maximum aluminum-oxide and oxide-coolant temperatures of assemblies cladded in 99+ percent aluminum. The assemblies considered were the Mark VB, VE, V5, 15 and 25. These assemblies consist of nested slug columns with individual uranium slugs cladded in aluminum cans. The CREDIT code was modified to calculate the oxide film thickness and the aluminum-oxide temperature at each axial increment. This information in this report will be used to evaluate the potential for cladding corrosion of the Mark 25 assembly

Introduction: Hazard mapping

Science.gov (United States)

Baum, Rex L.; Miyagi, Toyohiko; Lee, Saro; Trofymchuk, Oleksandr M

2014-01-01

Twenty papers were accepted into the session on landslide hazard mapping for oral presentation. The papers presented susceptibility and hazard analysis based on approaches ranging from field-based assessments to statistically based models to assessments that combined hydromechanical and probabilistic components. Many of the studies have taken advantage of increasing availability of remotely sensed data and nearly all relied on Geographic Information Systems to organize and analyze spatial data. The studies used a range of methods for assessing performance and validating hazard and susceptibility models. A few of the studies presented in this session also included some element of landslide risk assessment. This collection of papers clearly demonstrates that a wide range of approaches can lead to useful assessments of landslide susceptibility and hazard.

Correlations Between Extreme Atmospheric Hazards and Global Teleconnections: Implications for Multihazard Resilience

Science.gov (United States)

Steptoe, H.; Jones, S. E. O.; Fox, H.

2018-03-01

Occurrences of concurrent extreme atmospheric hazards represent a significant area of uncertainty for organizations involved in disaster mitigation and risk management. Understanding risks posed by natural disasters and their relationship with global climate drivers is crucial in preparing for extreme events. In this review we quantify the strength of the physical mechanisms linking hazards and atmosphere-ocean processes. We demonstrate how research from the science community may be used to support disaster risk reduction and global sustainable development efforts. We examine peer-reviewed literature connecting 16 regions affected by extreme atmospheric hazards and eight key global drivers of weather and climate. We summarize current understanding of multihazard disaster risk in each of these regions and identify aspects of the global climate system that require further investigation to strengthen our resilience in these areas. We show that some drivers can increase the risk of concurrent hazards across different regions. Organizations that support disaster risk reduction, or underwrite exposure, in multiple regions may have a heightened risk of facing multihazard losses. We find that 15 regional hazards share connections via the El Niño-Southern Oscillation, with the Indian Ocean Dipole, North Atlantic Oscillation, and the Southern Annular Mode being secondary sources of significant regional interconnectivity. From a hazard perspective, rainfall over China shares the most connections with global drivers and has links to both Northern and Southern Hemisphere modes of variability. We use these connections to assess the global likelihood of concurrent hazard occurrence in support of multihazard resilience and disaster risk reduction goals.

Barrow hazards survey

International Nuclear Information System (INIS)

1980-06-01

Following a series of public meetings at which PERG presented the results of a literature review and site specific accident study of the hazards of the maritime transport of spent nuclear reactor fuel to Barrow (en route to the Windscale reprocessing works), PERG was requested by the Planning Committee of Barrow Town Council to prepare an assessment of the interaction of the hazards arising from the concentration of nuclear activities in the area with those of a proposed gas-terminal. This report presents a preliminary review of the Environmental Impact Assessments prepared by the Borough Surveyor and a critical appraisal of the hazard analyses undertaken by the Health and Safety Executive, and the consultants to Cumbria County Council on this matter, the Safety and Reliability Directorate of the United Kingdom Atomic Energy Authority. After a general and historical introduction, the document continues under the following headings: a description of the hazards (BNFL spent fuel shipments; the gas terminal; gas condensate storage; the Vickers shipyard (involving nuclear powered submarines)); the interaction of hazards; planning implications and democratic decisions; recommendations. (U.K.)

Role of the unsaturated zone in radioactive and hazardous waste disposal

International Nuclear Information System (INIS)

Mercer, J.W.; Marine, I.W.; Rao, P.S.C.

1983-01-01

The problems of hazardous and low-level radioactive waste disposal caused by the physical and chemical processes active in the unsaturated zone are explored in this book. The focus is on the use of laboratory analyses, field observations, and numerical and analytical calculations to create a clear picture of both problems and potential solutions. Topics include policy modeling, statistical techniques, liners, and field applications. Contents include: Modeling of Moisture Movement through Layered Trench Covers; Role of Partially Saturated Soil in Liner Design for Hazardous Waste Disposal Sites; Field Experiments to Determine Saturated Hydraulic Conductivity in the Vadose Zone; Role of Desaturation on Transport through Fractured Rock; Nuclear Waste Isolation in the Unsaturated Zone of Arid Regions

Bioprocessing of low-level radioactive and mixed hazard wastes

International Nuclear Information System (INIS)

Stoner, D.L.

1990-01-01

Biologically-based treatment technologies are currently being developed at the Idaho National Engineering Laboratory (INEL) to aid in volume reduction and/or reclassification of low-level radioactive and mixed hazardous wastes prior to processing for disposal. The approaches taken to treat low-level radioactive and mixed wastes will reflect the physical (e.g., liquid, solid, slurry) and chemical (inorganic and/or organic) nature of the waste material being processed. Bioprocessing utilizes the diverse metabolic and biochemical characteristics of microorganisms. The application of bioadsorption and bioflocculation to reduce the volume of low-level radioactive waste are strategies comparable to the use of ion-exchange resins and coagulants that are currently used in waste reduction processes. Mixed hazardous waste would require organic as well as radionuclide treatment processes. Biodegradation of organic wastes or bioemulsification could be used in conjunction with radioisotope bioadsorption methods to treat mixed hazardous radioactive wastes. The degradation of the organic constituents of mixed wastes can be considered an alternative to incineration, while the use of bioemulsification may simply be used as a means to separate inorganic and organics to enable reclassification of wastes. The proposed technology base for the biological treatment of low-level radioactive and mixed hazardous waste has been established. Biodegradation of a variety of organic compounds that are typically found in mixed hazardous wastes has been demonstrated, degradative pathways determined and the nutritional requirements of the microorganisms are understood. Accumulation, adsorption and concentration of heavy and transition metal species and transuranics by microorganisms is widely recognized. Work at the INEL focuses on the application of demonstrated microbial transformations to process development

76 FR 4823 - Hazardous Waste Management System; Identifying and Listing Hazardous Waste Exclusion

Science.gov (United States)

2011-01-27

... Waste Management System; Identifying and Listing Hazardous Waste Exclusion AGENCY: Environmental... hazardous wastes. The Agency has decided to grant the petition based on an evaluation of waste-specific... excludes the petitioned waste from the requirements of hazardous waste regulations under the Resource...

Socio-economic vulnerability to natural hazards - proposal for an indicator-based model

Science.gov (United States)

Eidsvig, U.; McLean, A.; Vangelsten, B. V.; Kalsnes, B.; Ciurean, R. L.; Argyroudis, S.; Winter, M.; Corominas, J.; Mavrouli, O. C.; Fotopoulou, S.; Pitilakis, K.; Baills, A.; Malet, J. P.

2012-04-01

Vulnerability assessment, with respect to natural hazards, is a complex process that must consider multiple dimensions of vulnerability, including both physical and social factors. Physical vulnerability refers to conditions of physical assets, and may be modeled by the intensity and magnitude of the hazard, the degree of physical protection provided by the natural and built environment, and the physical robustness of the exposed elements. Social vulnerability refers to the underlying factors leading to the inability of people, organizations, and societies to withstand impacts from the natural hazards. Social vulnerability models can be used in combination with physical vulnerability models to estimate both direct losses, i.e. losses that occur during and immediately after the impact, as well as indirect losses, i.e. long-term effects of the event. Direct impact of a landslide typically includes casualties and damages to buildings and infrastructure while indirect losses may e.g. include business closures or limitations in public services. The direct losses are often assessed using physical vulnerability indicators (e.g. construction material, height of buildings), while indirect losses are mainly assessed using social indicators (e.g. economical resources, demographic conditions). Within the EC-FP7 SafeLand research project, an indicator-based method was proposed to assess relative socio-economic vulnerability to landslides. The indicators represent the underlying factors which influence a community's ability to prepare for, deal with, and recover from the damage associated with landslides. The proposed model includes indicators representing demographic, economic and social characteristics as well as indicators representing the degree of preparedness and recovery capacity. Although the model focuses primarily on the indirect losses, it could easily be extended to include more physical indicators which account for the direct losses. Each indicator is individually

Structural comparison of hazardous and non-hazardous coals based on gas sorption experiments

Energy Technology Data Exchange (ETDEWEB)

Lakatos, J.; Toth, J. [Research Lab. for Mining Chemistry, Hungarian Academy of Sciences, Miskolc-Egyetemvaros (Hungary); Radnai-Gyoengyoes, Z. [Geopard Ltd., Pecs (Hungary); Bokanyi, L. [Miskolc Univ., Miskolc-Egyetemvaros (Hungary). Dept. of Process Engineering

1997-12-31

Comparison of carbon-dioxide and propane sorption at ambient temperature was used for characterising the difference of the structure of hazardous and non hazardous coals. However, hazardous coals were found more microporous or contain more closed pores than non hazardous ones, this difference couldn`t have been enlarged and attributed to one petrographic component by producing the density fractions. Gas sorption isobars (nitrogen, methane, ethane) are proposed to make a distinction between fine pore structure of coals. (orig.)

Serviceable pavement marking retroreflectivity levels : technical report.

Science.gov (United States)

2009-03-01

This research addressed an array of issues related to measuring pavement markings retroreflectivity, factors : related to pavement marking performance, subjective evaluation process, best practices for using mobile : retroreflectometers, sampling pav...

46 CFR 108.645 - Markings on lifesaving appliances.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Markings on lifesaving appliances. 108.645 Section 108.645 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Equipment Markings and Instructions § 108.645 Markings on lifesaving appliances. (a...

25 CFR 141.16 - Price marking.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Price marking. 141.16 Section 141.16 Indians BUREAU OF... AND ZUNI RESERVATIONS General Business Practices § 141.16 Price marking. The price of each article... visible to the customer and that affords the customer a reasonable opportunity to learn the price of the...

THE VULNERABILITY TO WATER HAZARDS OF URBAN AREA TURDA– CÂMPIA TURZII

Directory of Open Access Journals (Sweden)

IOANA URCAN

2012-12-01

Full Text Available The vulnerability to water hazards of urban area Turda – Câmpia Turzii. The risk was defined as a social object whose primary component is vulnerability. This paper examines the way in which vulnerability was defined by highlighting its three aspects: physical, technical and social. The vulnerability involves a complex systematic approach especially when cities are analyzed. The economic, social heritage, the environmental elements can all become factors of vulnerability. In this paper the urban areas vulnerable towaterborne hazards, especially floods were mentioned. The means to reduce urban vulnerability were analyzed, highlighting the measures taken by the local communities to mitigate the crisis.

Informing Workers of Chemical Hazards: The OSHA Hazard Communication Standard.

Science.gov (United States)

American Chemical Society, Washington, DC.

Practical information on how to implement a chemical-related safety program is outlined in this publication. Highlights of the federal Occupational Safety and Health Administrations (OSHA) Hazard Communication Standard are presented and explained. These include: (1) hazard communication requirements (consisting of warning labels, material safety…

A decision model for the risk management of hazardous processes

International Nuclear Information System (INIS)

Holmberg, J.E.

1997-03-01

A decision model for risk management of hazardous processes as an optimisation problem of a point process is formulated in the study. In the approach, the decisions made by the management are divided into three categories: (1) planned process lifetime, (2) selection of the design and, (3) operational decisions. These three controlling methods play quite different roles in the practical risk management, which is also reflected in our approach. The optimisation of the process lifetime is related to the licensing problem of the process. It provides a boundary condition for a feasible utility function that is used as the actual objective function, i.e., maximizing the process lifetime utility. By design modifications, the management can affect the inherent accident hazard rate of the process. This is usually a discrete optimisation task. The study particularly concentrates upon the optimisation of the operational strategies given a certain design and licensing time. This is done by a dynamic risk model (marked point process model) representing the stochastic process of events observable or unobservable to the decision maker. An optimal long term control variable guiding the selection of operational alternatives in short term problems is studied. The optimisation problem is solved by the stochastic quasi-gradient procedure. The approach is illustrated by a case study. (23 refs.)

Transport of hazardous goods

International Nuclear Information System (INIS)

1989-01-01

The course 'Transport of hazardous goods' was held in Berlin in November 1988 in cooperation with the Bundesanstalt fuer Materialforschung und -pruefung. From all lecturs, two are recorded separately: 'Safety of tank trucks - requirements on the tank, development possibiities of active and passive safety' and 'Requirements on the transport of radioactive materials - possible derivations for other hazardous goods'. The other lectures deal with hazardous goods law, requirements on packinging, risk assessment, railroad transport, hazardous goods road network, insurance matters, EC regulations, and waste tourism. (HSCH) [de

Seismic hazard maps for Haiti

Science.gov (United States)

Frankel, Arthur; Harmsen, Stephen; Mueller, Charles; Calais, Eric; Haase, Jennifer

2011-01-01

We have produced probabilistic seismic hazard maps of Haiti for peak ground acceleration and response spectral accelerations that include the hazard from the major crustal faults, subduction zones, and background earthquakes. The hazard from the Enriquillo-Plantain Garden, Septentrional, and Matheux-Neiba fault zones was estimated using fault slip rates determined from GPS measurements. The hazard from the subduction zones along the northern and southeastern coasts of Hispaniola was calculated from slip rates derived from GPS data and the overall plate motion. Hazard maps were made for a firm-rock site condition and for a grid of shallow shear-wave velocities estimated from topographic slope. The maps show substantial hazard throughout Haiti, with the highest hazard in Haiti along the Enriquillo-Plantain Garden and Septentrional fault zones. The Matheux-Neiba Fault exhibits high hazard in the maps for 2% probability of exceedance in 50 years, although its slip rate is poorly constrained.

Intelligent systems for remote decommissioning in hazardous environments

International Nuclear Information System (INIS)

Drotning, W.D.; Bennett, P.C.

1991-01-01

Investigation of advanced technologies utilizing intelligent machines is being supported jointly by the US Department of Energy Offices of Civilian Radioactive Waste Management (DOE/RW) and Environmental Restoration and Waste Management (DOE/EM) for automation of transportation package handling operations at nuclear facilities and of nuclear waste site remediation efforts. Handling operation requirements include identification, location, and health physics operation, followed by bolting/unbolting operations and package disassembly. To accommodate these operations and the diversity of packages, fast model-based automated programming and force feedback control of a robotic cask handling system were developed. In addition, sensor-directed model-based robotic control has been demonstrated for application to hazardous material cleanup. In this application, a graphical interface is used to simulate and evaluate operator-controlled motions and provide telerobotic control of the system. Remote automated handling technologies developed through these programs have the potential to decrease worker exposure and increase efficiency during decommissioning activities in hazardous environments. 8 refs., 4 figs

46 CFR 199.176 - Markings on lifesaving appliances.

Science.gov (United States)

2010-10-01

... ARRANGEMENTS LIFESAVING SYSTEMS FOR CERTAIN INSPECTED VESSELS Requirements for All Vessels § 199.176 Markings on lifesaving appliances. (a) Lifeboats and rescue boats. Each lifeboat and rescue boat must be plainly marked as follows: (1) Each side of each lifeboat and rescue boat bow must be marked in block...

Physical health of the student as the main value of pedagogical process

Directory of Open Access Journals (Sweden)

Deminskaya L.A.

2012-07-01

Full Text Available The features of physical health of students are considered. Factors which influence on the physical health of children of school age are rotined. Methodical experience of teachers of physical education is presented. It is determined maintenance of concept «Physical health». The methods of estimation of the functional state of organism of schoolboys are selected. It is set that the axiological going near the health of students requires knowledge of methods of control after the functional state of organism and methods of development of physical health. It is marked that the modern teacher of physical education can not execute the educational, educate and health tasks of pedagogical process without knowledge of level of development of physical health and physical preparedness of students. It is marked that the modern teacher of physical education must know and able to estimate the indexes of physical health and physical preparedness of organism of children level.

INTERNAL HAZARDS ANALYSIS FOR LICENSE APPLICATION

Energy Technology Data Exchange (ETDEWEB)

R.J. Garrett

2005-02-17

The purpose of this internal hazards analysis is to identify and document the internal hazards and potential initiating events associated with preclosure operations of the repository at Yucca Mountain. Internal hazards are those hazards presented by the operation of the facility and by its associated processes that can potentially lead to a radioactive release or cause a radiological hazard. In contrast to external hazards, internal hazards do not involve natural phenomena and external man-made hazards. This internal hazards analysis was performed in support of the preclosure safety analysis and the License Application for the Yucca Mountain Project. The methodology for this analysis provides a systematic means to identify internal hazards and potential initiating events that may result in a radiological hazard or radiological release during the repository preclosure period. These hazards are documented in tables of potential internal hazards and potential initiating events (Section 6.6) for input to the repository event sequence categorization process. The results of this analysis will undergo further screening and analysis based on the criteria that apply to the performance of event sequence analyses for the repository preclosure period. The evolving design of the repository will be re-evaluated periodically to ensure that internal hazards that have not been previously evaluated are identified.

INTERNAL HAZARDS ANALYSIS FOR LICENSE APPLICATION

International Nuclear Information System (INIS)

Garrett, R.J.

2005-01-01

The purpose of this internal hazards analysis is to identify and document the internal hazards and potential initiating events associated with preclosure operations of the repository at Yucca Mountain. Internal hazards are those hazards presented by the operation of the facility and by its associated processes that can potentially lead to a radioactive release or cause a radiological hazard. In contrast to external hazards, internal hazards do not involve natural phenomena and external man-made hazards. This internal hazards analysis was performed in support of the preclosure safety analysis and the License Application for the Yucca Mountain Project. The methodology for this analysis provides a systematic means to identify internal hazards and potential initiating events that may result in a radiological hazard or radiological release during the repository preclosure period. These hazards are documented in tables of potential internal hazards and potential initiating events (Section 6.6) for input to the repository event sequence categorization process. The results of this analysis will undergo further screening and analysis based on the criteria that apply to the performance of event sequence analyses for the repository preclosure period. The evolving design of the repository will be re-evaluated periodically to ensure that internal hazards that have not been previously evaluated are identified

Management and hazardous waste characterization in Central for Isotop and Radiation Application based on potential dangers

International Nuclear Information System (INIS)

Niken Hayudanti Anggarini; Megi Stefanus; Prihatiningsih

2014-01-01

Separating and storing hazardous waste have been done based on the physical, chemical, and based on potential dangers due to safety hazardous waste temporary storage warehouse. From the results of data collection in 2014 found that the most dominant hazardous waste is organic liquid waste which reaches 61 %, followed by inorganic liquid waste 33 % while organic solid waste and inorganic solid waste has a small portion. When viewed from potential danger, flammable liquid waste has the greatest volume percentage it is 47 % and is followed by a corrosive liquid waste 26 %, while the liquid waste that has not been identified is quite large, which is 9 %. From the highest hazard potential data, hazardous waste storage warehouse is required to have good air circulation and waste storage shelf protected from direct solar heat. Cooperation of lab workers and researchers are also indispensable in providing identification of each waste generated to facilitate the subsequent waste management. (author)

Survey on utility of yoga as an alternative therapy for occupational hazards among dental practioners.

Science.gov (United States)

Ramamoorthy, Ananthalakshmi; Jeevakarunyam, Sathiya Jeeva; Janardhanan, Sunitha; Jeddy, Nadeem; Vasan, Srikaanth Aranmanai; Raja, Arundayanadhi; Ikram, Parvez

2015-01-01

The therapeutic potential of yoga are often considered complementary to various forms of medical practice. Very few studies have evaluated the effects of yoga in the treatment of occupational hazards among dentists. Hence, this cross-sectional study was designed to evaluate the adoption of yoga techinques as an alternative therapy in treatment of physical and psychological occupational hazards among dental general practitioners in Chennai, India. A validated closed-ended questionnaire was circulated to 500 dental general practitioners in Chennai, India and we received 394 completed questionnaires. The questionnaire documented demographic data, occupational hazards and the type of treatment taken for the hazards. Musculoskeletal pain with stress (47%) was the most common occupational hazard reported, followed by only stress (27.4%), and only musculoskeletal pain (25.6%). Only 9.6% of practitioners adopted yoga as an alternative treatment for these occupational hazards. Interestingly, majority (46.4%) of them did exercise, gym, massage, walking and heard music. Surprisingly, 43.9% did not take any measures to treat these occupational hazards. However 53.3% of the dentists who did not consider yoga as an alternative therapy, stated lack of time as a reason for not practicing yoga while 17.6% of them don't believe yoga as a therapy. Despite musculoskeletal pain and stress being the most common occupational hazard prevalent among dentists, over 50% of the subjects surveyed didn't seek any measure to treat these occupational hazards and only 10% of them practiced yoga as the alternative therapy.

PREOPERATIVE ENDOSCOPIC MARKING OF UNPALPABLE COLONIC TUMORS

Directory of Open Access Journals (Sweden)

A. L. Goncharov

2013-01-01

Full Text Available The identification of small colon lesions is one of the major problems in laparoscopic colonic resection.Research objective: to develop a technique of visualization of small tumors of a colon by preoperative endoscopic marking of a tumor.Materials and methods. In one day prior to operation to the patient after bowel preparation the colonoscopy is carried out. In the planned point near tumor on antimesentery edge the submucous infiltration of marking solution (Micky Sharpz blue tattoo pigment, UK is made. The volume of entered solution of 1–3 ml. In only 5 months of use of a technique preoperative marking to 14 patients with small (the size of 1–3 cm malignant tumors of the left colon is performed.Results. The tattoo mark was well visualized by during operation at 13 of 14 patients. In all cases we recorded no complications. Time of operation with preoperative marking averaged 108 min, that is significantly less in comparison with average time of operation with an intra-operative colonoscopy – 155 min (р < 0.001.Conclusions. The first experience of preoperative endoscopic marking of non palpable small tumors of a colon is encouraging. Performance of a technique wasn't accompanied by complications and allowed to reduce significantly time of operation and to simplify conditions of performance of operation.

49 CFR 1520.13 - Marking SSI.

Science.gov (United States)

2010-10-01

... SECURITY INFORMATION § 1520.13 Marking SSI. (a) Marking of paper records. In the case of paper records... back cover, including a binder cover or folder, if the document has a front and back cover; (2) Any.... 552 and 49 CFR parts 15 and 1520. (d) Other types of records. In the case of non-paper records that...

76 FR 55846 - Hazardous Waste Management System: Identification and Listing of Hazardous Waste: Carbon Dioxide...

Science.gov (United States)

2011-09-09

... carbon dioxide (CO 2 ) streams that are hazardous from the definition of hazardous waste, provided these... management under the Resource Conservation and Recovery Act (RCRA) to conditionally exclude carbon dioxide... 2050-AG60 Hazardous Waste Management System: Identification and Listing of Hazardous Waste: Carbon...

[Research in high energy physics

International Nuclear Information System (INIS)

1991-01-01

This report discusses progress in the following research in high energy physics: The crystal ball experiment; delco at PEP; proton decay experiment; MACRO detector; mark III detector; SLD detector; CLEO II detector; and the caltech L3 group

9 CFR 316.13 - Marking of outside containers.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Marking of outside containers. 316.13... INSPECTION AND CERTIFICATION MARKING PRODUCTS AND THEIR CONTAINERS § 316.13 Marking of outside containers. (a... domestic commerce is moved from an official establishment, the outside container shall bear an official...

Infrared technique for decoding of invisible laser markings

Science.gov (United States)

Haferkamp, Heinz; Jaeschke, Peter; Stein, Johannes; Goede, Martin

2002-03-01

Counterfeiting and product piracy continues to be an important issue not only for the Western industry, but also for the society in general. Due to the drastic increase in product imitation and the request for plagiarism protection as well as for reducing thefts there is a high interest in new protection methods providing new security features. The method presented here consists of security markings which are included below paint layers. These markings are invisible for the human eye due to the non-transparency of the upper layers in the visible spectral range. However, the markings can be detected by an infrared technique taking advantage on the partial transparency of the upper paint layers in the IR-region. Metal sheets are marked using laser radiation. The beam of a Nd:YAG-laser provides a modification of the surface structure, resulting in dark markings due to the annealing effect. After coating of the laser-marked material, the markings are invisible for the bare eye. In order to read out the invisible information below the coating, an infrared reflection technique is used. The samples are illuminated with halogen lamps or infrared radiators. Many coating materials (i. e. paints) show a certain transparency in the mid-infrared region, especially between 3 - 5 micrometers . The reflected radiation is detected using an IR-camera with a sensitivity range from 3.4 - 5 micrometers . Due to the different reflection properties between the markings and their surrounding, the information can be detected.

Forensic surface metrology: tool mark evidence.

Science.gov (United States)

Gambino, Carol; McLaughlin, Patrick; Kuo, Loretta; Kammerman, Frani; Shenkin, Peter; Diaczuk, Peter; Petraco, Nicholas; Hamby, James; Petraco, Nicholas D K

2011-01-01

Over the last several decades, forensic examiners of impression evidence have come under scrutiny in the courtroom due to analysis methods that rely heavily on subjective morphological comparisons. Currently, there is no universally accepted system that generates numerical data to independently corroborate visual comparisons. Our research attempts to develop such a system for tool mark evidence, proposing a methodology that objectively evaluates the association of striated tool marks with the tools that generated them. In our study, 58 primer shear marks on 9 mm cartridge cases, fired from four Glock model 19 pistols, were collected using high-resolution white light confocal microscopy. The resulting three-dimensional surface topographies were filtered to extract all "waviness surfaces"-the essential "line" information that firearm and tool mark examiners view under a microscope. Extracted waviness profiles were processed with principal component analysis (PCA) for dimension reduction. Support vector machines (SVM) were used to make the profile-gun associations, and conformal prediction theory (CPT) for establishing confidence levels. At the 95% confidence level, CPT coupled with PCA-SVM yielded an empirical error rate of 3.5%. Complementary, bootstrap-based computations for estimated error rates were 0%, indicating that the error rate for the algorithmic procedure is likely to remain low on larger data sets. Finally, suggestions are made for practical courtroom application of CPT for assigning levels of confidence to SVM identifications of tool marks recorded with confocal microscopy. Copyright © 2011 Wiley Periodicals, Inc.

HAZARD ANALYSIS SOFTWARE

International Nuclear Information System (INIS)

Sommer, S; Tinh Tran, T.

2008-01-01

Washington Safety Management Solutions, LLC developed web-based software to improve the efficiency and consistency of hazard identification and analysis, control selection and classification, and to standardize analysis reporting at Savannah River Site. In the new nuclear age, information technology provides methods to improve the efficiency of the documented safety analysis development process which includes hazard analysis activities. This software provides a web interface that interacts with a relational database to support analysis, record data, and to ensure reporting consistency. A team of subject matter experts participated in a series of meetings to review the associated processes and procedures for requirements and standard practices. Through these meetings, a set of software requirements were developed and compiled into a requirements traceability matrix from which software could be developed. The software was tested to ensure compliance with the requirements. Training was provided to the hazard analysis leads. Hazard analysis teams using the software have verified its operability. The software has been classified as NQA-1, Level D, as it supports the analysis team but does not perform the analysis. The software can be transported to other sites with alternate risk schemes. The software is being used to support the development of 14 hazard analyses. User responses have been positive with a number of suggestions for improvement which are being incorporated as time permits. The software has enforced a uniform implementation of the site procedures. The software has significantly improved the efficiency and standardization of the hazard analysis process

Microscopic saw mark analysis: an empirical approach.

Science.gov (United States)

Love, Jennifer C; Derrick, Sharon M; Wiersema, Jason M; Peters, Charles

2015-01-01

Microscopic saw mark analysis is a well published and generally accepted qualitative analytical method. However, little research has focused on identifying and mitigating potential sources of error associated with the method. The presented study proposes the use of classification trees and random forest classifiers as an optimal, statistically sound approach to mitigate the potential for error of variability and outcome error in microscopic saw mark analysis. The statistical model was applied to 58 experimental saw marks created with four types of saws. The saw marks were made in fresh human femurs obtained through anatomical gift and were analyzed using a Keyence digital microscope. The statistical approach weighed the variables based on discriminatory value and produced decision trees with an associated outcome error rate of 8.62-17.82%. © 2014 American Academy of Forensic Sciences.

Smoking, physical exercise, BMI and late foetal death

DEFF Research Database (Denmark)

Morales-Suárez-Varela, Maria; Nohr, Ellen A; Bech, Bodil H

2016-01-01

The aim of this paper was to estimate the effect of maternal and paternal smoking on foetal death (miscarriage and stillbirth) and to estimate potential interactions with physical exercise and pre-pregnancy body mass index. We selected 87,930 pregnancies from the population-based Danish National......) for predominantly late foetal death (miscarriage and stillbirth). An interaction contrast ratio was used to assess potential effect measure modification of smoking by physical exercise and body mass index. The adjusted hazard ratio of foetal death was 1.22 (95 % CI 1.02-1.46) for couples where both parents smoked...... with a slightly higher hazard ratio for foetal death if both parents smoked. This study suggests that smoking may increase the negative effect of a high BMI on foetal death, but results were not statistically significant for the interaction between smoking and physical exercise....

TREATMENT OF METAL-LADEN HAZARDOUS WASTES WITH ADVANCED CLEAN COAL TECHNOLOGY BY-PRODUCTS

Energy Technology Data Exchange (ETDEWEB)

James T. Cobb, Jr.

2003-09-12

Metal-laden wastes can be stabilized and solidified using advanced clean coal technology by-products (CCTBs)--fluid bed combustor ash and spray drier solids. These utility-generated treatment chemicals are available for purchase through brokers, and commercial applications of this process are being practiced by treaters of metal-laden hazardous waste. A complex of regulations governs this industry, and sensitivities to this complex has discouraged public documentation of treatment of metal-laden hazardous wastes with CCTBs. This report provides a comprehensive public documentation of laboratory studies that show the efficacy of the stabilization and solidification of metal-laden hazardous wastes--such as lead-contaminated soils and sandblast residues--through treatment with CCTBs. It then describes the extensive efforts that were made to obtain the permits allowing a commercial hazardous waste treater to utilize CCTBs as treatment chemicals and to install the equipment required to do so. It concludes with the effect of this lengthy process on the ability of the treatment company to realize the practical, physical outcome of this effort, leading to premature termination of the project.

Effects of a multifactorial fall prevention program on fall incidence and physical function in community-dwelling older adults with risk of falls.

Science.gov (United States)

Lee, Hsuei-Chen; Chang, Ku-Chou; Tsauo, Jau-Yih; Hung, Jen-Wen; Huang, Yu-Ching; Lin, Sang-I

2013-04-01

To evaluate effects of a multifactorial fall prevention program on fall incidence and physical function in community-dwelling older adults. Multicenter randomized controlled trial. Three medical centers and adjacent community health centers. Community-dwelling older adults (N=616) who have fallen in the previous year or are at risk of falling. After baseline assessment, eligible subjects were randomly allocated into the intervention group (IG) or the control group (CG), stratified by the Physiological Profile Assessment (PPA) fall risk level. The IG received a 3-month multifactorial intervention program including 8 weeks of exercise training, health education, home hazards evaluation/modification, along with medication review and ophthalmology/other specialty consults. The CG received health education brochures, referrals, and recommendations without direct exercise intervention. Primary outcome was fall incidence within 1 year. Secondary outcomes were PPA battery (overall fall risk index, vision, muscular strength, reaction time, balance, and proprioception), Timed Up & Go (TUG) test, Taiwan version of the International Physical Activity Questionnaire, EuroQol-5D, Geriatric Depression Scale (GDS), and the Falls Efficacy Scale-International at 3 months after randomization. Participants were 76±7 years old and included low risk 25.6%, moderate risk 25.6%, and marked risk 48.7%. The cumulative 1-year fall incidence was 25.2% in the IG and 27.6% in the CG (hazard ratio=.90; 95% confidence interval, .66-1.23). The IG improved more favorably than the CG on overall PPA fall risk index, reaction time, postural sway with eyes open, TUG test, and GDS, especially for those with marked fall risk. The multifactorial fall prevention program with exercise intervention improved functional performance at 3 months for community-dwelling older adults with risk of falls, but did not reduce falls at 1-year follow-up. Fall incidence might have been decreased simultaneously in both

Perception of scent over-marks by golden hamsters (Mesocricetus auratus): novel mechanisms for determining which individual's mark is on top.

Science.gov (United States)

Johnston, R E; Bhorade, A

1998-09-01

Hamsters preferentially remember or value the top scent of a scent over-mark. What cues do they use to do this? Using habituation-discrimination techniques, we exposed male golden hamsters (Mesocricetus auratus) on 3 to 4 trials to genital over-marks from 2 females and then tested subjects for their familiarity with these 2 scents compared with that of a novel female's secretion. Preferential memory for 1 of the 2 individuals' scents did not occur if the 2 marks did not overlap or did not overlap but differed in age, but it did occur if a region of overlap existed or 1 mark apparently occluded another (but did not overlap it). Thus, hamsters use regions of overlap and the spatial configuration of scents to evaluate over-marks. These phenomena constitute evidence for previously unsuspected perceptual abilities, including olfactory scene analysis, which is analogous to visual and auditory scene analysis.

Hazardous waste minimization report for CY 1986

International Nuclear Information System (INIS)

Kendrick, C.M.

1990-12-01

Oak Ridge National Laboratory (ORNL) is a multipurpose research and development facility. Its primary role is the support of energy technology through applied research and engineering development and scientific research in basic and physical sciences. ORNL also is a valuable resource in the solution of problems of national importance, such as nuclear and chemical waste management. In addition, useful radioactive and stable isotopes which are unavailable from the private sector are produced at ORNL. As a result of these activities, hazardous, radioactive, and mixed wastes are generated at ORNL. A formal hazardous waste minimization program for ORNL was launched in mid 1985 in response to the requirements of Section 3002 of the Resource Conservation and Recovery Act (RCRA). During 1986, a task plan was developed. The six major tasks include: planning and implementation of a laboratory-wide chemical inventory and the subsequent distribution, treatment, storage, and/or disposal (TSD) of unneeded chemicals; establishment and implementation of a distribution system for surplus chemicals to other (internal and external) organizations; training and communication functions necessary to inform and motivate laboratory personnel; evaluation of current procurement and tracking systems for hazardous materials and recommendation and implementation of improvements; systematic review of applicable current and proposed ORNL procedures and ongoing and proposed activities for waste volume and/or toxicity reduction potential; and establishment of criteria by which to measure progress and reporting of significant achievements. 8 refs., 1 fig., 5 tabs

Concerns of the Novice Physical Education Teacher

Science.gov (United States)

Gordon, Evelyn J.

2016-01-01

The purpose of this case study was to examine novice physical education teachers in the first and second year of teaching. Participants included two novice physical education teachers, John in Year 1 and Mark in Year 2. Methodology included observations, semistructured interviews, and documents. Data were analyzed using open coding and constant…

Hazardous Chemicals

Centers for Disease Control (CDC) Podcasts

Chemicals are a part of our daily lives, providing many products and modern conveniences. With more than three decades of experience, The Centers for Disease Control and Prevention (CDC) has been in the forefront of efforts to protect and assess people's exposure to environmental and hazardous chemicals. This report provides information about hazardous chemicals and useful tips on how to protect you and your family from harmful exposure.

Hazardous Waste Landfill Siting using GIS Technique and Analytical Hierarchy Process

Directory of Open Access Journals (Sweden)

Ozeair Abessi

2010-07-01

Full Text Available Disposal of large amount of generated hazardous waste in power plants, has always received communities' and authori¬ties attentions. In this paper using site screening method and Analytical Hierarchy Process (AHP a sophisticated approach for siting hazardous waste landfill in large areas is presented. This approach demonstrates how the evaluation criteria such as physical, socio-economical, technical, environmental and their regulatory sub criteria can be introduced into an over layer technique to screen some limited appropriate zones in the area. Then, in order to find the optimal site amongst the primary screened site utilizing a Multiple Criteria Decision Making (MCDM method for hierarchy computations of the process is recommended. Using the introduced method an accurate siting procedure for environmental planning of the landfills in an area would be enabled. In the study this approach was utilized for disposal of hazardous wastes of Shahid Rajaee thermal power plant located in Qazvin province west central part of Iran. As a result of this study 10 suitable zones were screened in the area at first, then using analytical hierarchy process a site near the power plant were chosen as the optimal site for landfilling of the hazardous wastes in Qazvin province.

Chemical hazard evaluation of material disposal area (MDA) B closure project

Energy Technology Data Exchange (ETDEWEB)

Laul, Jagdish C [Los Alamos National Laboratory

2010-04-19

TA-21, MDA-B (NES) is the 'contaminated dump,' landfill with radionuclides and chemicals from process waste disposed in 1940s. This paper focuses on chemical hazard categorization and hazard evaluation of chemicals of concern (e.g., peroxide, beryllium). About 170 chemicals were disposed in the landfill. Chemicals included products, unused and residual chemicals, spent, waste chemicals, non-flammable oils, mineral oil, etc. MDA-B was considered a High hazard site. However, based on historical records and best engineering judgment, the chemical contents are probably at best 5% of the chemical inventory. Many chemicals probably have oxidized, degraded or evaporated for volatile elements due to some fire and limited shelf-life over 60 yrs, which made it possible to downgrade from High to Low chemical hazard site. Knowing the site history and physical and chemical properties are very important in characterizing a NES site. Public site boundary is only 20 m, which is a major concern. Chemicals of concern during remediation are peroxide that can cause potential explosion and beryllium exposure due to chronic beryllium disease (CBD). These can be prevented or mitigated using engineering control (EC) and safety management program (SMP) to protect the involved workers and public.

Technical Guidance for Hazardous Analysis, Emergency Planning for Extremely Hazardous Substances

Science.gov (United States)

This current guide supplements NRT-1 by providing technical assistance to LEPCs to assess the lethal hazards related to potential airborne releases of extremely hazardous substances (EHSs) as designated under Section 302 of Title Ill of SARA.

CARDIOVASCULAR BENEFITS AND POTENTIAL HAZARDS OF PHYSICAL EXERCISE IN ELDERLY PEOPLE

Directory of Open Access Journals (Sweden)

Mauri Kallinen

2005-04-01

Full Text Available Large and consistent beneficial effects with few adverse effects have been found in relation to physical exercise in selected samples of elderly subjects. However, thus far, it has not been confirmed to what extent the effects of physical exercise among elderly people are beneficial or even harmful in population-based studies. Additionally, the role of exercise testing among elderly people remains unclear. Firstly, the effects of prolonged physical training on cardiovascular fitness in 66-85-year-old women were examined in a cross-sectional study. Secondly, the predictive value of exercise-test status and results, including exercise capacity for survival, were studied in 75-year-old men and women. Thirdly, the effects of an endurance and strength training programme were examined in women aged 76 to 78 years in a population-based randomized controlled trial. Finally, the cardiac-adverse effects of acute exercise in the form of a cycle ergometer test were clarified in 75-year-old men and women. In the maximal exercise tests the mean peak oxygen uptake was respectively 26.2 and 18.7 ml·kg-1·min-1 among the physically active and less active control women. High cycling power (Watts per kg body weight in the completed ergometer test was associated with decreased risk for death (multivariate HR 0.20; CI 0.08 - 0.50. The 18-week strength training resulted in a 9.4% increase in peak oxygen uptake while the endurance training improved peak oxygen uptake by 6.8%. A significant increase in cycling power in W/kg was found in the strength and endurance training groups compared to controls. Five cases of cardio- or cerebrovascular health problems emerged in the exercise training groups. These health problems were not directly related to physical exertion. In the final study 23 and 7% of the exercise tests in men and women, respectively, were prematurely terminated because of cardiac arrhythmia or ST segment depressions. Using various study designs and

Hypergol Maintenance Facility Hazardous Waste South Staging Areas, SWMU 070 Corrective Measures Implementation

Science.gov (United States)

Miller, Ralinda R.

2016-01-01

This document presents the Corrective Measures Implementation (CMI) Year 10 Annual Report for implementation of corrective measures at the Hypergol Maintenance Facility (HMF) Hazardous Waste South Staging Areas at Kennedy Space Center, Florida. The work is being performed by Tetra Tech, Inc., for the National Aeronautics and Space Administration (NASA) under Indefinite Delivery Indefinite Quantity (IDIQ) NNK12CA15B, Task Order (TO) 07. Mr. Harry Plaza, P.E., of NASA's Environmental Assurance Branch is the Remediation Project Manager for John F. Kennedy Space Center. The Tetra Tech Program Manager is Mr. Mark Speranza, P.E., and the Tetra Tech Project Manager is Robert Simcik, P.E.

The Coastal Hazard Wheel system for coastal multi-hazard assessment & management in a changing climate

DEFF Research Database (Denmark)

Appelquist, Lars Rosendahl; Halsnæs, Kirsten

2015-01-01

This paper presents the complete Coastal Hazard Wheel (CHW) system, developed for multi-hazard-assessment and multi-hazard-management of coastal areas worldwide under a changing climate. The system is designed as a low-tech tool that can be used in areas with limited data availability...... screening and management. The system is developed to assess the main coastal hazards in a single process and covers the hazards of ecosystem disruption, gradual inundation, salt water intrusion, erosion and flooding. The system was initially presented in 2012 and based on a range of test......-applications and feedback from coastal experts, the system has been further refined and developed into a complete hazard management tool. This paper therefore covers the coastal classification system used by the CHW, a standardized assessment procedure for implementation of multi-hazard-assessments, technical guidance...

Disposal of hazardous wastes

International Nuclear Information System (INIS)

Barnhart, B.J.

1978-01-01

The Fifth Life Sciences Symposium entitled Hazardous Solid Wastes and Their Disposal on October 12 through 14, 1977 was summarized. The topic was the passage of the National Resources Conservation and Recovery Act of 1976 will force some type of action on all hazardous solid wastes. Some major points covered were: the formulation of a definition of a hazardous solid waste, assessment of long-term risk, list of specific materials or general criteria to specify the wastes of concern, Bioethics, sources of hazardous waste, industrial and agricultural wastes, coal wastes, radioactive wastes, and disposal of wastes

[Critical aspects of the management of "hazardous" health care workers. Consensus document].

Science.gov (United States)

Magnavita, N; Cicerone, Marina; Cirese, Vania; De Lorenzo, G; Di Giannantonios, M; Fileni, A; Goggiamani, Angela; Magnavita, Giulia; Marchi, Edda; Mazzullo, D; Monami, F; Monami, S; Puro, V; Ranalletta, Dalila; Ricciardi, G; Sacco, A; Spagnolo, A; Spagnolo, A G; Squarcione, S; Zavota, Giovanna

2006-01-01

A worker is considered to be hazardous to others when, in the course of performing a specific work task, his/her health problems (e.g., substance dependence, emotional disorders, physical disability, transmissible diseases) pose a risk for other workers' or the public's health and safety, or begins to interfere with ability to function in profession life. The presence of certain illnesses or the fact that a health care worker is impaired because of them do not necessarily imply that he, or she, is hazardous for others. Working in health care increases the probability that an impaired worker being hazardous for others. Management of hazardous workers requires new techniques and procedures, and specific policies. An interdisciplinary group of experts from medical, bioethical, legal and administrative disciplines, together with trade union and employers' representatives, is currently attempting to define a way to put prevention measures into practice in accordance with state laws and individual rights. A consensus document is presented, covering critical aspects such as: social responsibility of the employer, risk management, informed consent, non compliance, confidentiality, responsibility of workers, disclosure of risk to patients, non-discrimination, counselling and recovery of impaired workers, effectiveness of international guidelines. Occupational health professionals are obliged to adhere to ethical principles in the management of "hazardous" workers; the assessment of ethical costs and benefits for the stakeholders is the basis for appropriate decisions.

Offsite transportation hazards assessment

International Nuclear Information System (INIS)

Burnside, M.E.

1997-01-01

This report documents the emergency preparedness Hazards Assessment for the offsite transportation of hazardous material from the Hanford Site. The assessment is required by the US Department of Energy (DOE) Order 151.1. Offsite transportation accidents are categorized using the DOE system to assist communication within the DOE and assure that appropriate assistance is provided to the people in charge at the scene. The assistance will initially include information about the load and the potential hazards. Local authorities will use the information to protect the public following a transportation accident. This Hazards Assessment will focus on the material being transported from the Hanford Site. Shipments coming to Hanford are the responsibility of the shipper and the carrier and, therefore, are not included in this Hazards Assessment, unless the DOE elects to be the shipper of record

Deterministic Earthquake Hazard Assessment by Public Agencies in California

Science.gov (United States)

Mualchin, L.

2005-12-01

Even in its short recorded history, California has experienced a number of damaging earthquakes that have resulted in new codes and other legislation for public safety. In particular, the 1971 San Fernando earthquake produced some of the most lasting results such as the Hospital Safety Act, the Strong Motion Instrumentation Program, the Alquist-Priolo Special Studies Zone Act, and the California Department of Transportation (Caltrans') fault-based deterministic seismic hazard (DSH) map. The latter product provides values for earthquake ground motions based on Maximum Credible Earthquakes (MCEs), defined as the largest earthquakes that can reasonably be expected on faults in the current tectonic regime. For surface fault rupture displacement hazards, detailed study of the same faults apply. Originally, hospital, dam, and other critical facilities used seismic design criteria based on deterministic seismic hazard analyses (DSHA). However, probabilistic methods grew and took hold by introducing earthquake design criteria based on time factors and quantifying "uncertainties", by procedures such as logic trees. These probabilistic seismic hazard analyses (PSHA) ignored the DSH approach. Some agencies were influenced to adopt only the PSHA method. However, deficiencies in the PSHA method are becoming recognized, and the use of the method is now becoming a focus of strong debate. Caltrans is in the process of producing the fourth edition of its DSH map. The reason for preferring the DSH method is that Caltrans believes it is more realistic than the probabilistic method for assessing earthquake hazards that may affect critical facilities, and is the best available method for insuring public safety. Its time-invariant values help to produce robust design criteria that are soundly based on physical evidence. And it is the method for which there is the least opportunity for unwelcome surprises.

Radiological hazards of alpha-contaminated waste

International Nuclear Information System (INIS)

Rodgers, J.C.

1982-01-01

The radiological hazards of alpha-contaminated wastes are discussed in this overview in terms of two components of hazard: radiobiological hazard, and radioecological hazard. Radiobiological hazard refers to human uptake of alpha-emitters by inhalation and ingestion, and the resultant dose to critical organs of the body. Radioecological hazard refers to the processes of release from buried wastes, transport in the environment, and translocation to man through the food chain. Besides detailing the sources and magnitude of hazards, this brief review identifies the uncertainties in their estimation, and implications for the regulatory process

Hazards from aircraft

International Nuclear Information System (INIS)

Grund, J.E.; Hornyik, K.

1975-01-01

The siting of nuclear power plants has created innumerable environmental concerns. Among the effects of the ''man-made environment'' one of increasing importance in recent nuclear plant siting hazards analysis has been the concern about aircraft hazards to the nuclear plant. These hazards are of concern because of the possibility that an aircraft may have a malfunction and crash either near the plant or directly into it. Such a crash could be postulated to result, because of missile and/or fire effects, in radioactive releases which would endanger the public health and safety. The majority of studies related to hazards from air traffic have been concerned with the determination of the probability associated with an aircraft striking vulnerable portions of a given plant. Other studies have focused on the structural response to such a strike. This work focuses on the problem of strike probability. 13 references

Occupational hazards and illnesses of Filipino women workers in export processing zones.

Science.gov (United States)

Lu, Jinky Leilanie

2008-01-01

This was a baseline study on occupational exposure and health problems among women workers in export processing zones. Physical, chemical, and ergonomic hazards were evaluated and measured through workplace ambient monitoring, survey questionnaires, and interviews with 500 respondents in 24 companies (most were female at 88.8%). The top 5 hazards were ergonomic hazards (72.2%), heat (66.6%), overwork (66.6%), poor ventilation (54.8%), and chemical exposure (50.8%). The most common illnesses were gastrointestinal problems (57.4%), backache (56%), headache (53.2%), and fatigue/weakness (53.2%). Logistic regression showed an association between certain work-related factors and occupational illnesses, and psychosocial problems. Highly significant associations were hearing loss with years spent in the company (p=.005) and gender (p=.006), headache and dizziness with poor ventilation (p=.000), backache with prolonged work (p=.003). These results will have implications for policy and program formulation for women workers' concerns and issues in export zones.

49 CFR 172.317 - KEEP AWAY FROM HEAT handling mark.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false KEEP AWAY FROM HEAT handling mark. 172.317 Section... REQUIREMENTS, AND SECURITY PLANS Marking § 172.317 KEEP AWAY FROM HEAT handling mark. (a) General. For... of Division 5.2 must be marked with the KEEP AWAY FROM HEAT handling mark specified in this section...

Semiotic aspects of quantum physics

International Nuclear Information System (INIS)

Januschke, Eugen

2010-01-01

By means of semiotics it is studied, how it succeeds in quantum physics to make formulas plausible, the basic physical facts of which are not accessible for a common understanding respectively an understanding in the sense of classical physics. Thereby it deals with a generally acknowledged kind of making understandable of certain physical formulas beyond the individual marking distinctly of abilities of explaining and understanding of social phenomena and historical developments, whereby to these formulas each a certain experiment is put on side. The experiment is thereby such chosen that the physical phenomenon, which is described in the formula, is studied in the experiment, so that the formula then results as evaluation of the experiment.

Exploring the effects of driving experience on hazard awareness and risk perception via real-time hazard identification, hazard classification, and rating tasks.

Science.gov (United States)

Borowsky, Avinoam; Oron-Gilad, Tal

2013-10-01

This study investigated the effects of driving experience on hazard awareness and risk perception skills. These topics have previously been investigated separately, yet a novel approach is suggested where hazard awareness and risk perception are examined concurrently. Young, newly qualified drivers, experienced drivers, and a group of commercial drivers, namely, taxi drivers performed three consecutive tasks: (1) observed 10 short movies of real-world driving situations and were asked to press a button each time they identified a hazardous situation; (2) observed one of three possible sub-sets of 8 movies (out of the 10 they have seen earlier) for the second time, and were asked to categorize them into an arbitrary number of clusters according to the similarity in their hazardous situation; and (3) observed the same sub-set for a third time and following each movie were asked to rate its level of hazardousness. The first task is considered a real-time identification task while the other two are performed using hindsight. During it participants' eye movements were recorded. Results showed that taxi drivers were more sensitive to hidden hazards than the other driver groups and that young-novices were the least sensitive. Young-novice drivers also relied heavily on materialized hazards in their categorization structure. In addition, it emerged that risk perception was derived from two major components: the likelihood of a crash and the severity of its outcome. Yet, the outcome was rarely considered under time pressure (i.e., in real-time hazard identification tasks). Using hindsight, when drivers were provided with the opportunity to rate the movies' hazardousness more freely (rating task) they considered both components. Otherwise, in the categorization task, they usually chose the severity of the crash outcome as their dominant criterion. Theoretical and practical implications are discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Regional Landslide Hazard Assessment Considering Potential Climate Change

Science.gov (United States)

Almeida, S.; Holcombe, E.; Pianosi, F.; Wagener, T.

2016-12-01

Landslides have many negative economic and societal impacts, including the potential for significant loss of life and damage to infrastructure. These risks are likely to be exacerbated in the future by a combination of climatic and socio-economic factors. Climate change, for example, is expected to increase the occurrence of rainfall-triggered landslides, because a warmer atmosphere tends to produce more high intensity rainfall events. Prediction of future changes in rainfall, however, is subject to high levels of uncertainty, making it challenging for decision-makers to identify the areas and populations that are most vulnerable to landslide hazards. In this study, we demonstrate how a physically-based model - the Combined Hydrology and Stability Model (CHASM) - can be used together with Global Sensitivity Analysis (GSA) to explore the underlying factors controlling the spatial distribution of landslide risks across a regional landscape, while also accounting for deep uncertainty around potential future rainfall triggers. We demonstrate how GSA can be used to analyse CHASM which in turn represents the spatial variability of hillslope characteristics in the study region, while accounting for other uncertainties. Results are presented in the form of landslide hazard maps, utilising high-resolution digital elevation datasets for a case study in St Lucia in the Caribbean. Our findings about spatial landslide hazard drivers have important implications for data collection approaches and for long-term decision-making about land management practices.

Occupational health hazards in the interventional laboratory: Time for a safer environment.

Science.gov (United States)

Klein, Lloyd W; Miller, Donald L; Balter, Stephen; Laskey, Warren; Naito, Neil; Haines, David; Ross, Allan; Mauro, Matthew A; Goldstein, James A

2018-01-04

Over the past 30 years, the advent of fluoroscopically guided interventional procedures has resulted in dramatic increments in both X-ray exposure and physical demands that predispose interventionists to distinct occupational health hazards. The hazards of accumulated radiation exposure have been known for years, but until recently the other potential risks have been ill-defined and under-appreciated. The physical stresses inherent in this career choice appear to be associated with a predilection to orthopedic injuries, attributable in great part to the cumulative adverse effects of bearing the weight and design of personal protective apparel worn to reduce radiation risk and to the poor ergonomic design of interventional suites. These occupational health concerns pertain to cardiologists, radiologists and surgeons working with fluoroscopy, pain management specialists performing nonvascular fluoroscopic procedures, and the many support personnel working in these environments. This position paper is the work of representatives of the major societies of physicians who work in the interventional laboratory environment, and has been formally endorsed by all. In this paper, the available data delineating the prevalence of these occupational health risks is reviewed and ongoing epidemiological studies designed to further elucidate these risks are summarized. The main purpose is to publicly state speaking with a single voice that the interventional laboratory poses workplace hazards that must be acknowledged, better understood and mitigated to the greatest extent possible, and to advocate vigorously on behalf of efforts to reduce these hazards. Interventional physicians and their professional societies, working together with industry, should strive toward the ultimate zero radiation exposure work environment that would eliminate the need for personal protective apparel and prevent its orthopedic and ergonomic consequences. © 2008 Wiley-Liss, Inc. Copyright © 2008 Wiley�

Probabilistic Tsunami Hazard Analysis

Science.gov (United States)

Thio, H. K.; Ichinose, G. A.; Somerville, P. G.; Polet, J.

2006-12-01

The recent tsunami disaster caused by the 2004 Sumatra-Andaman earthquake has focused our attention to the hazard posed by large earthquakes that occur under water, in particular subduction zone earthquakes, and the tsunamis that they generate. Even though these kinds of events are rare, the very large loss of life and material destruction caused by this earthquake warrant a significant effort towards the mitigation of the tsunami hazard. For ground motion hazard, Probabilistic Seismic Hazard Analysis (PSHA) has become a standard practice in the evaluation and mitigation of seismic hazard to populations in particular with respect to structures, infrastructure and lifelines. Its ability to condense the complexities and variability of seismic activity into a manageable set of parameters greatly facilitates the design of effective seismic resistant buildings but also the planning of infrastructure projects. Probabilistic Tsunami Hazard Analysis (PTHA) achieves the same goal for hazards posed by tsunami. There are great advantages of implementing such a method to evaluate the total risk (seismic and tsunami) to coastal communities. The method that we have developed is based on the traditional PSHA and therefore completely consistent with standard seismic practice. Because of the strong dependence of tsunami wave heights on bathymetry, we use a full waveform tsunami waveform computation in lieu of attenuation relations that are common in PSHA. By pre-computing and storing the tsunami waveforms at points along the coast generated for sets of subfaults that comprise larger earthquake faults, we can efficiently synthesize tsunami waveforms for any slip distribution on those faults by summing the individual subfault tsunami waveforms (weighted by their slip). This efficiency make it feasible to use Green's function summation in lieu of attenuation relations to provide very accurate estimates of tsunami height for probabilistic calculations, where one typically computes

Flood hazards for nuclear power plants

International Nuclear Information System (INIS)

Yen, B.C.

1988-01-01

Flooding hazards for nuclear power plants may be caused by various external geophysical events. In this paper the hydrologic hazards from flash floods, river floods and heavy rain at the plant site are considered. Depending on the mode of analysis, two types of hazard evaluation are identified: 1) design hazard which is the probability of flooding over an expected service period, and 2) operational hazard which deals with real-time forecasting of the probability of flooding of an incoming event. Hazard evaluation techniques using flood frequency analysis can only be used for type 1) design hazard. Evaluation techniques using rainfall-runoff simulation or multi-station correlation can be used for both types of hazard prediction. (orig.)

Beyond classical physics

CERN Document Server

Cunningham, Mark A

2018-01-01

This undergraduate textbook discusses the nature of the microscopic universe from a modern perspective, based on Einstein's notions of relativity and Noether's proof of the emergence of conservation laws from symmetries of the equations of motion. These ideas drove the development of the Standard Model of particle physics and string theory. The second half of the book explores various aspects of many-body physics, ranging from chemical systems to plasmas to black holes. Like the previous textbook authored by by Mark Cunningham, Neoclassical Physics, this text uses a guided discovery approach of instruction, highlighting the experimental results that drove development of our modern picture of subatomic physics. Many problems utilize Mathematica software to enable students to explore the meaning of different equations in a graphical manner. Students will gain an appreciation of the current state of physical theory, in preparation for more detailed, advanced study as upperclassmen.

Mark Raidpere portreefotod Kielis

Index Scriptorium Estoniae

1999-01-01

Kieli Linnagaleriis avatud 2. Ars Baltica fototriennaalil 'Can You Hear Me?' esindab Eestit Mark Raidpere seeriaga 'Portreed 1998'. Näituse Eesti-poolne kuraator Anu Liivak, kataloogiteksti kirjutas Anders Härm. Tuntumaid osalejaid triennaalil Wolfgang Tillmans

Mark 1 Test Facility

Data.gov (United States)

Federal Laboratory Consortium — The Mark I Test Facility is a state-of-the-art space environment simulation test chamber for full-scale space systems testing. A $1.5M dollar upgrade in fiscal year...

Integrated approach for coastal hazards and risks in Sri Lanka

Science.gov (United States)

Garcin, M.; Desprats, J. F.; Fontaine, M.; Pedreros, R.; Attanayake, N.; Fernando, S.; Siriwardana, C. H. E. R.; de Silva, U.; Poisson, B.

2008-06-01

The devastating impact of the tsunami of 26 December 2004 on the shores of the Indian Ocean recalled the importance of knowledge and the taking into account of coastal hazards. Sri Lanka was one of the countries most affected by this tsunami (e.g. 30 000 dead, 1 million people homeless and 70% of the fishing fleet destroyed). Following this tsunami, as part of the French post-tsunami aid, a project to establish a Geographical Information System (GIS) on coastal hazards and risks was funded. This project aims to define, at a pilot site, a methodology for multiple coastal hazards assessment that might be useful for the post-tsunami reconstruction and for development planning. This methodology could be applied to the whole coastline of Sri Lanka. The multi-hazard approach deals with very different coastal processes in terms of dynamics as well as in terms of return period. The first elements of this study are presented here. We used a set of tools integrating a GIS, numerical simulations and risk scenario modelling. While this action occurred in response to the crisis caused by the tsunami, it was decided to integrate other coastal hazards into the study. Although less dramatic than the tsunami these remain responsible for loss of life and damage. Furthermore, the establishment of such a system could not ignore the longer-term effects of climate change on coastal hazards in Sri Lanka. This GIS integrates the physical and demographic data available in Sri Lanka that is useful for assessing the coastal hazards and risks. In addition, these data have been used in numerical modelling of the waves generated during periods of monsoon as well as for the December 2004 tsunami. Risk scenarios have also been assessed for test areas and validated by field data acquired during the project. The results obtained from the models can be further integrated into the GIS and contribute to its enrichment and to help in better assessment and mitigation of these risks. The coastal-hazards

Integrated approach for coastal hazards and risks in Sri Lanka

Directory of Open Access Journals (Sweden)

M. Garcin

2008-06-01

Full Text Available The devastating impact of the tsunami of 26 December 2004 on the shores of the Indian Ocean recalled the importance of knowledge and the taking into account of coastal hazards. Sri Lanka was one of the countries most affected by this tsunami (e.g. 30 000 dead, 1 million people homeless and 70% of the fishing fleet destroyed. Following this tsunami, as part of the French post-tsunami aid, a project to establish a Geographical Information System (GIS on coastal hazards and risks was funded. This project aims to define, at a pilot site, a methodology for multiple coastal hazards assessment that might be useful for the post-tsunami reconstruction and for development planning. This methodology could be applied to the whole coastline of Sri Lanka.

The multi-hazard approach deals with very different coastal processes in terms of dynamics as well as in terms of return period. The first elements of this study are presented here. We used a set of tools integrating a GIS, numerical simulations and risk scenario modelling. While this action occurred in response to the crisis caused by the tsunami, it was decided to integrate other coastal hazards into the study. Although less dramatic than the tsunami these remain responsible for loss of life and damage. Furthermore, the establishment of such a system could not ignore the longer-term effects of climate change on coastal hazards in Sri Lanka.

This GIS integrates the physical and demographic data available in Sri Lanka that is useful for assessing the coastal hazards and risks. In addition, these data have been used in numerical modelling of the waves generated during periods of monsoon as well as for the December 2004 tsunami. Risk scenarios have also been assessed for test areas and validated by field data acquired during the project. The results obtained from the models can be further integrated into the GIS and contribute to its enrichment and to help in better assessment and mitigation

Mark Raidpere näitused Pariisis ja Napolis / Mark Raidpere ; interv. Harry Liivrand

Index Scriptorium Estoniae

Raidpere, Mark

2008-01-01

Mark Raidpere videod "Vekovka", "Dedication / Pühendus", "Majestoso Mystico" näitusel Pariisis Michel Reini galeriis. Osaleb koos saksa fotograafi Sven Johnega näitusel Napolis. Kreekas Thessalonikis valminud filmist "1:1:1"

Are seismic hazard assessment errors and earthquake surprises unavoidable?

Science.gov (United States)

Kossobokov, Vladimir

2013-04-01

Why earthquake occurrences bring us so many surprises? The answer seems evident if we review the relationships that are commonly used to assess seismic hazard. The time-span of physically reliable Seismic History is yet a small portion of a rupture recurrence cycle at an earthquake-prone site, which makes premature any kind of reliable probabilistic statements about narrowly localized seismic hazard. Moreover, seismic evidences accumulated to-date demonstrate clearly that most of the empirical relations commonly accepted in the early history of instrumental seismology can be proved erroneous when testing statistical significance is applied. Seismic events, including mega-earthquakes, cluster displaying behaviors that are far from independent or periodic. Their distribution in space is possibly fractal, definitely, far from uniform even in a single segment of a fault zone. Such a situation contradicts generally accepted assumptions used for analytically tractable or computer simulations and complicates design of reliable methodologies for realistic earthquake hazard assessment, as well as search and definition of precursory behaviors to be used for forecast/prediction purposes. As a result, the conclusions drawn from such simulations and analyses can MISLEAD TO SCIENTIFICALLY GROUNDLESS APPLICATION, which is unwise and extremely dangerous in assessing expected societal risks and losses. For example, a systematic comparison of the GSHAP peak ground acceleration estimates with those related to actual strong earthquakes, unfortunately, discloses gross inadequacy of this "probabilistic" product, which appears UNACCEPTABLE FOR ANY KIND OF RESPONSIBLE SEISMIC RISK EVALUATION AND KNOWLEDGEABLE DISASTER PREVENTION. The self-evident shortcomings and failures of GSHAP appeals to all earthquake scientists and engineers for an urgent revision of the global seismic hazard maps from the first principles including background methodologies involved, such that there becomes: (a) a

Mark retention of calcein in Cisco and Bloater

Science.gov (United States)

Chalupnicki, Marc A.; Mackey, Gregg; Nash, Kendra; Chiavelli, Richard; Johnson, James H.; Kehler, Thomas; Ringler, Neil H.

2016-01-01

Since 2012, a multi-agency initiative to restore these native forage species has been under way. Evaluating the restoration success of Cisco Coregonus artedi and Bloater C. hoyi in Lake Ontario waters requires methods to identify stocked fish. However, juvenile Cisco and Bloater are fragile; thus, mass marking techniques that reduce the handling of individual fish are required and have not previously been evaluated. In 2014–2015 we evaluated the usefulness of calcein (SE-MARK) as a marker on bony structures, including the otolith. Juvenile Bloater and Cisco (14, 100, 128 d old) were immersed in a calcein bath at 5,000 mg/L of water for 4 min to apply the chemical marker. Observations of the marking retention were evaluated 8 d following the treatment. All fish immersed in calcein had strong brilliant marks (rating scale 3) on all bony structures including scales, fin rays, jaw bones, and vertebrate. The otolith was the only hard structure that did not show a brilliant marking due to the opaque nature of the structure. Our results suggest that calcein produces a strong discernable mark on hard bony structures of Cisco and Bloater; however, long-term retention needs further study.

Remote sensing of glacier- and permafrost-related hazards in high mountains: an overview

Directory of Open Access Journals (Sweden)

A. Kääb

2005-01-01

Full Text Available Process interactions and chain reactions, the present shift of cryospheric hazard zones due to atmospheric warming, and the potential far reach of glacier disasters make it necessary to apply modern remote sensing techniques for the assessment of glacier and permafrost hazards in high-mountains. Typically, related hazard source areas are situated in remote regions, often difficult to access for physical and/or political reasons. In this contribution we provide an overview of air- and spaceborne remote sensing methods suitable for glacier and permafrost hazard assessment and disaster management. A number of image classification and change detection techniques support high-mountain hazard studies. Digital terrain models (DTMs, derived from optical stereo data, synthetic aperture radar or laserscanning, represent one of the most important data sets for investigating high-mountain processes. Fusion of satellite stereo-derived DTMs with the DTM from the Shuttle Radar Topography Mission (SRTM is a promising way to combine the advantages of both technologies. Large changes in terrain volume such as from avalanche deposits can indeed be measured even by repeat satellite DTMs. Multitemporal data can be used to derive surface displacements on glaciers, permafrost and landslides. Combining DTMs, results from spectral image classification, and multitemporal data from change detection and displacement measurements significantly improves the detection of hazard potentials. Modelling of hazardous processes based on geographic information systems (GIS complements the remote sensing analyses towards an integrated assessment of glacier and permafrost hazards in mountains. Major present limitations in the application of remote sensing to glacier and permafrost hazards in mountains are, on the one hand, of technical nature (e.g. combination and fusion of different methods and data; improved understanding of microwave backscatter. On the other hand, better

Welding hazards

International Nuclear Information System (INIS)

Khan, M.A.

1992-01-01

Welding technology is advancing rapidly in the developed countries and has converted into a science. Welding involving the use of electricity include resistance welding. Welding shops are opened in residential area, which was causing safety hazards, particularly the teenagers and children who eagerly see the welding arc with their naked eyes. There are radiation hazards from ultra violet rays which irritate the skin, eye irritation. Welding arc light of such intensity could damage the eyes. (Orig./A.B.)

Relative consequences of transporting hazardous materials

International Nuclear Information System (INIS)

Fullwood, R.R.; Rhyne, W.R.; Simmons, J.A.; Reese, R.T.

1980-01-01

The objective of this paper is to discuss methods under study at Transportation Technology Center to develop a perspective on how technical measures of hazard and risk relate to perception of hazards, harm, and risks associated with transporting hazardous materials. This paper is concerned with two major aspects of the relative hazards problem. The first aspect is the analyses of the possible effects associated with exposure to hazardous materials as contained in the following two parts: outlines of possible problems and controversies that could be encountered in the evaluation and comparisons of hazards and risks; and description of the various measures of harm (hazards or dangers) and subsequent comparisons thereof. The second aspect of this paper leads into a presentation of the results of a study which had the following purposes: to develop analytical techniques for a consistent treatment of the phenomenology of the consequences of a release of hazardous materials; to reduce the number of variables in the consequence analyses by development of transportation accident scenarios which have the same meteorological conditions, demography, traffic and population densities, geographical features and other appropriate conditions and to develop consistent methods for presenting the results of studies and analyses that describe the phenomenology and compare hazards. The results of the study are intended to provide a bridge between analytical certainty and perception of the hazards involved. Understanding the differences in perception of hazards resulting from transport of various hazardous materials is fraught with difficulties in isolating the qualitative and quantitative features of the problem. By relating the quantitative impacts of material hazards under identical conditions, it is hoped that the perceived differences in material hazards can be delineated and evaluated

Detection and recognition of road markings in panoramic images

Science.gov (United States)

Li, Cheng; Creusen, Ivo; Hazelhoff, Lykele; de With, Peter H. N.

2015-03-01

Detection of road lane markings is attractive for practical applications such as advanced driver assistance systems and road maintenance. This paper proposes a system to detect and recognize road lane markings in panoramic images. The system can be divided into four stages. First, an inverse perspective mapping is applied to the original panoramic image to generate a top-view road view, in which the potential road markings are segmented based on their intensity difference compared to the surrounding pixels. Second, a feature vector of each potential road marking segment is extracted by calculating the Euclidean distance between the center and the boundary at regular angular steps. Third, the shape of each segment is classified using a Support Vector Machine (SVM). Finally, by modeling the lane markings, previous falsely detected segments can be rejected based on their orientation and position relative to the lane markings. Our experiments show that the system is promising and is capable of recognizing 93%, 95% and 91% of striped line segments, blocks and arrows respectively, as well as 94% of the lane markings.

Women in physics in the Netherlands : Recent Developments

NARCIS (Netherlands)

Eerd, Adrianne R.T. van; Marel, Nienke van der; Rudolf, Petra; Wolf, Els de; Hartline, Beverly Karplus; Horton, Renee K.; Kaicher, Catherine M.

2009-01-01

Although women are still a small minority in physics in the Netherlands, their visibility has increased markedly over the past five years. The measures put in place after the first IUPAP Women in Physics Conference in 2002 have in fact not increased the total number of female staff, but put the

Education and risk of coronary heart disease: Assessment of mediation by behavioural risk factors using the additive hazards model

DEFF Research Database (Denmark)

Nordahl, H; Rod, NH; Frederiksen, BL

2013-01-01

seven Danish cohort studies were linked to registry data on education and incidence of CHD. Mediation by smoking, low physical activity, and body mass index (BMI) on the association between education and CHD were estimated by applying newly proposed methods for mediation based on the additive hazards...... % CI: 12, 22) for women and 37 (95 % CI: 28, 46) for men could be ascribed to the pathway through smoking. Further, 39 (95 % CI: 30, 49) cases for women and 94 (95 % CI: 79, 110) cases for men could be ascribed to the pathway through BMI. The effects of low physical activity were negligible. Using...... contemporary methods, the additive hazards model, for mediation we indicated the absolute numbers of CHD cases prevented when modifying smoking and BMI. This study confirms previous claims based on the Cox proportional hazards model that behavioral risk factors partially mediates the effect of education on CHD...

EcoMark 2.0

DEFF Research Database (Denmark)

Guo, Chenjuan; Yang, Bin; Andersen, Ove

2015-01-01

Eco-routing is a simple yet effective approach to substantially reducing the environmental impact, e.g., fuel consumption and greenhouse gas (GHG) emissions, of vehicular transportation. Eco-routing relies on the ability to reliably quantify the environmental impact of vehicles as they travel...... in a spatial network. The procedure of quantifying such vehicular impact for road segments of a spatial network is called eco-weight assignment. EcoMark 2.0 proposes a general framework for eco-weight assignment to enable eco-routing. It studies the abilities of six instantaneous and five aggregated models......, and experiments for assessing the utility of the impact models in assigning eco-weights. The application of EcoMark 2.0 indicates that the instantaneous model EMIT and the aggregated model SIDRA-Running are suitable for assigning eco-weights under varying circumstances. In contrast, other instantaneous models...

Interview with Mark Watson

Directory of Open Access Journals (Sweden)

Katy Shaw

2016-04-01

Full Text Available Mark Watson is a British comedian and novelist. His five novels to date – 'Bullet Points' (2004, 'A Light-Hearted Look At Murder' (2007, 'Eleven' (2010, 'The Knot' (2012 and 'Hotel Alpha' (2014 – explore human relationships and communities in contemporary society. His latest novel Hotel Alpha tells the story of an extraordinary hotel in London and two mysterious disappearances that raise questions no one seems willing to answer. External to the novel, readers can also discover more about the hotel and its inhabitants in one hundred extra stories that expand the world of the novel and can be found at http://www.hotelalphastories.com. In conversation here with Dr Katy Shaw, Mark offers some reflections on his writing process, the field of contemporary literature, and the vitality of the novel form in the twenty-first century.

Microneedle physical contact as a therapeutic for abnormal scars

OpenAIRE

Yeo, David C.; Balmayor, Elizabeth R.; Schantz, Jan-Thorsten; Xu, Chenjie

2017-01-01

Background Abnormal (keloid and hypertrophic) scars are a significant affliction with no satisfactory single modality therapy to-date. Available options are often ineffective, painful, potentially hazardous, and require healthcare personnel involvement. Herein a self-administered microneedle device based on drug-free physical contact for inhibiting abnormal scars is reported. Its therapeutic activity through microneedle contact eliminates hazards associated with toxic anti-scarring drugs whil...

Recognition in context: Implications for trade mark law.

Science.gov (United States)

Humphreys, Michael S; McFarlane, Kimberley A; Burt, Jennifer S; Kelly, Sarah J; Weatherall, Kimberlee G; Burrell, Robert G

2017-10-01

Context effects in recognition have played a major role in evaluating theories of recognition. Understanding how context impacts recognition is also important for making sound trade mark law. Consumers attempting to discriminate between the brand they are looking for and a look-alike product often have to differentiate products which share a great deal of common context: positioning on the supermarket shelf, the type of store, aspects of the packaging, or brand claims. Trade mark and related laws aim to protect brands and reduce consumer confusion, but courts assessing allegations of trade mark infringement often lack careful empirical evidence concerning the impact of brand and context similarity, and, in the absence of such evidence, make assumptions about how consumers respond to brands that downplay the importance of context and focus on the similarity of registered marks. The experiments reported in this paper aimed to test certain common assumptions in trade mark law, providing evidence that shared context can cause mistakes even where brand similarity is low.

ANALYSIS AND MITIGATION OF X-RAY HAZARD GENERATED FROM HIGH INTENSITY LASER-TARGET INTERACTIONS

Energy Technology Data Exchange (ETDEWEB)

Qiu, R.; Liu, J.C.; Prinz, A.A.; Rokni, S.H.; Woods, M.; Xia, Z.; /SLAC

2011-03-21

Interaction of a high intensity laser with matter may generate an ionizing radiation hazard. Very limited studies have been made, however, on the laser-induced radiation protection issue. This work reviews available literature on the physics and characteristics of laser-induced X-ray hazards. Important aspects include the laser-to-electron energy conversion efficiency, electron angular distribution, electron energy spectrum and effective temperature, and bremsstrahlung production of X-rays in the target. The possible X-ray dose rates for several femtosecond Ti:sapphire laser systems used at SLAC, including the short pulse laser system for the Matter in Extreme Conditions Instrument (peak power 4 TW and peak intensity 2.4 x 10{sup 18} W/cm{sup 2}) were analysed. A graded approach to mitigate the laser-induced X-ray hazard with a combination of engineered and administrative controls is also proposed.

21 CFR 123.6 - Hazard analysis and Hazard Analysis Critical Control Point (HACCP) plan.

Science.gov (United States)

2010-04-01

... Control Point (HACCP) plan. 123.6 Section 123.6 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... Provisions § 123.6 Hazard analysis and Hazard Analysis Critical Control Point (HACCP) plan. (a) Hazard... fish or fishery product being processed in the absence of those controls. (b) The HACCP plan. Every...

Between tide and wave marks: a unifying model of physical zonation on littoral shores

Directory of Open Access Journals (Sweden)

Christopher E. Bird

2013-09-01

Full Text Available The effects of tides on littoral marine habitats are so ubiquitous that shorelines are commonly described as ‘intertidal’, whereas waves are considered a secondary factor that simply modifies the intertidal habitat. However mean significant wave height exceeds tidal range at many locations worldwide. Here we construct a simple sinusoidal model of coastal water level based on both tidal range and wave height. From the patterns of emergence and submergence predicted by the model, we derive four vertical shoreline benchmarks which bracket up to three novel, spatially distinct, and physically defined zones. The (1 emergent tidal zone is characterized by tidally driven emergence in air; the (2 wave zone is characterized by constant (not periodic wave wash; and the (3 submergent tidal zone is characterized by tidally driven submergence. The decoupling of tidally driven emergence and submergence made possible by wave action is a critical prediction of the model. On wave-dominated shores (wave height ≫ tidal range, all three zones are predicted to exist separately, but on tide-dominated shores (tidal range ≫ wave height the wave zone is absent and the emergent and submergent tidal zones overlap substantially, forming the traditional “intertidal zone”. We conclude by incorporating time and space in the model to illustrate variability in the physical conditions and zonation on littoral shores. The wave:tide physical zonation model is a unifying framework that can facilitate our understanding of physical conditions on littoral shores whether tropical or temperate, marine or lentic.

Trade Mark Cluttering: An Exploratory Report Commissioned by UKIPO

OpenAIRE

von Graevenitz, Georg; Greenhalgh, Christine; Helmers, Christian; Schautschick, Philipp

2012-01-01

This report explores the problem of “cluttering” of trade mark registers. The report consists of two parts: the first presents a conceptual discussion of “cluttering” of trade mark registers. The second part provides an exploratory empirical analysis of trade mark applications at the UK Intellectual Property Office (UKIPO) and the European trade mark office (OHIM). This part contains results of a descriptive and an econometric analysis. According to our definition, cluttering arises where fir...

32 CFR 2400.16 - Derivative classification markings.

Science.gov (United States)

2010-07-01

... SECURITY PROGRAM Derivative Classification § 2400.16 Derivative classification markings. (a) Documents... 32 National Defense 6 2010-07-01 2010-07-01 false Derivative classification markings. 2400.16..., as described in § 2400.12 of this part, the information may not be used as a basis for derivative...

Recent research in earth structure, earthquake and mine seismology, and seismic hazard evaluation in South Africa

CSIR Research Space (South Africa)

Wright, C

2003-07-01

Full Text Available of earthquakes, earthquake hazard and earth structure in South Africa was prepared for the centennial handbook of the Interna- tional Association of Seismology and the Physics of the Earth?s Interior(IASPEI).3 Referencestothesescompletedinthelastfour...

Multiplexing clonality: combining RGB marking and genetic barcoding

Science.gov (United States)

Cornils, Kerstin; Thielecke, Lars; Hüser, Svenja; Forgber, Michael; Thomaschewski, Michael; Kleist, Nadja; Hussein, Kais; Riecken, Kristoffer; Volz, Tassilo; Gerdes, Sebastian; Glauche, Ingmar; Dahl, Andreas; Dandri, Maura; Roeder, Ingo; Fehse, Boris

2014-01-01

RGB marking and DNA barcoding are two cutting-edge technologies in the field of clonal cell marking. To combine the virtues of both approaches, we equipped LeGO vectors encoding red, green or blue fluorescent proteins with complex DNA barcodes carrying color-specific signatures. For these vectors, we generated highly complex plasmid libraries that were used for the production of barcoded lentiviral vector particles. In proof-of-principle experiments, we used barcoded vectors for RGB marking of cell lines and primary murine hepatocytes. We applied single-cell polymerase chain reaction to decipher barcode signatures of individual RGB-marked cells expressing defined color hues. This enabled us to prove clonal identity of cells with one and the same RGB color. Also, we made use of barcoded vectors to investigate clonal development of leukemia induced by ectopic oncogene expression in murine hematopoietic cells. In conclusion, by combining RGB marking and DNA barcoding, we have established a novel technique for the unambiguous genetic marking of individual cells in the context of normal regeneration as well as malignant outgrowth. Moreover, the introduction of color-specific signatures in barcodes will facilitate studies on the impact of different variables (e.g. vector type, transgenes, culture conditions) in the context of competitive repopulation studies. PMID:24476916

Hazardous materials and waste management a guide for the professional hazards manager

CERN Document Server

Cheremisinoff, Nicholas P

1995-01-01

The management of hazardous materials and industrial wastes is complex, requiring a high degree of knowledge over very broad technical and legal subject areas. Hazardous wastes and materials are diverse, with compositions and properties that not only vary significantly between industries, but within industries, and indeed within the complexity of single facilities. Proper management not only requires an understanding of the numerous and complex regulations governing hazardous materials and waste streams, but an understanding and knowledge of the treatment, post-treatment, and waste minimizatio

Small WEEE: determining recyclables and hazardous substances in plastics.

Science.gov (United States)

Dimitrakakis, Emmanouil; Janz, Alexander; Bilitewski, Bernd; Gidarakos, Evangelos

2009-01-30

An examination regarding the determination of recyclables and hazardous substances in small waste electrical and electronic equipment (WEEE) found in the residual household waste stream of the city of Dresden, Germany, is described. Firstly, attitudes towards the disposal of small WEEE in the latter are assessed, and product types and categories which mostly contribute to its composition are identified. Physical parameters which could be used as mechanical sorting criteria are measured, and the material composition of the small WEEE found is determined. The hazardous substances' "base" charge in the residual waste is established by means of atomic absorption spectrometry and ionic chromatography, as a first step in estimating the contribution of small WEEE to its pollutant load. Consequently, the content of small WEEE plastics in key heavy metals and halogens is determined. Key conclusions are drawn concerning the future strategic development and practical implementation of the 2002/96/EC Directive, in relation to small WEEE management and recycling.

Small WEEE: Determining recyclables and hazardous substances in plastics

International Nuclear Information System (INIS)

Dimitrakakis, Emmanouil; Janz, Alexander; Bilitewski, Bernd; Gidarakos, Evangelos

2009-01-01

An examination regarding the determination of recyclables and hazardous substances in small waste electrical and electronic equipment (WEEE) found in the residual household waste stream of the city of Dresden, Germany, is described. Firstly, attitudes towards the disposal of small WEEE in the latter are assessed, and product types and categories which mostly contribute to its composition are identified. Physical parameters which could be used as mechanical sorting criteria are measured, and the material composition of the small WEEE found is determined. The hazardous substances' 'base' charge in the residual waste is established by means of atomic absorption spectrometry and ionic chromatography, as a first step in estimating the contribution of small WEEE to its pollutant load. Consequently, the content of small WEEE plastics in key heavy metals and halogens is determined. Key conclusions are drawn concerning the future strategic development and practical implementation of the 2002/96/EC Directive, in relation to small WEEE management and recycling

Studies on fire and explosion hazards of zircaloy fines

International Nuclear Information System (INIS)

Andriessen, H.; Kroebel, R.; Bereznai, T.; Wurtz, R.; Hattwig, M.; Hensel, W.; Osswald, R.

1987-01-01

To promote the safe handling of the Zry-fines arising in a reprocessing plant, an experimental program was conducted under which the fire and explosion hazards were assessed. In order to evaluate the effect of irradiation on the ignition and explosion properties, irradiated and unirradiated Zry-fines, generated with the same tool, were investigated and compared which each other. Irradiated Zry-fines exhibit a higher fire and explosion hazard than non-irradiated fines passing the same sieve. These differences are caused mainly by the irradiation induced embrittlement and hardening of the Zry-hulls. On account of these different physical properties the generated fines have got a finer grain size due to a more spherical shape resulting in a higher bulk density and a lower mean value. These secondary irradiation effects seem to determine the lower minimum ignition temperatures and the higher values for the maximum explosion pressure and rate of pressure rise

78 FR 58604 - Safety Advisory: Unauthorized Marking of Compressed Gas Cylinders

Science.gov (United States)

2013-09-24

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Safety Advisory... Investigator, Eastern Region, Office of Hazardous Materials Safety, Pipeline and Hazardous Materials Safety...

Occupational skin hazards and prevalence of occupational skin diseases in shoe manufacturing workers in Indonesia

NARCIS (Netherlands)

Febriana, Sri Awalia; Soebono, Hardyanto; Coenraads, Pieter-Jan

Purpose Shoe manufacturing workers are exposed daily to an extensive range of potential physical and chemical occupational hazards. Shoe manufacturing in Indonesia is one of the industrial sectors that has shown sustained growth amongst the newly industrialized countries (NICs). In this study, we

Marking for Structure using Boolean Feedback | Louw | Journal for ...

African Journals Online (AJOL)

This paper presents evidence that marking student texts with well considered checklists is more effective than marking by hand. An experiment conducted on first-year students illustrated that the checklists developed to mark introductions, conclusions and paragraphs yielded better revision results than handwritten ...

Tooth-marked small theropod bone: an extremely rare trace

DEFF Research Database (Denmark)

Jacobsen, Aase Roland

2001-01-01

Tooth-marked dinosaur bones provide insight into feeding behaviours and biting strategies of theropod dinosaurs. The majority of theropod tooth marks reported to date have been found on herbivorous dinosaur bones, although some tyrannosaurid bones with tooth marks have also been reported. In 1988...

Ageing Management in the CENM Triga Mark II Research Reactor

Energy Technology Data Exchange (ETDEWEB)

El Younoussi, C.; Nacir, B.; El Bakkari, B.; Boulaich, Y. [Centre for Nuclear Studies of Maâmora (CENM), National Centre of Energy Sciences and Nuclear Techniques (CNESTEN), Rabat (Morocco)

2014-08-15

Physical ageing is one of the most important factors that may reduce the safety margins calculated in the design of safety system components of a research reactor. In this context, special efforts are necessary for ensuring the safety of research reactors through appropriate ageing management actions. The paper deals with the overall aspects of the ageing management system of the Moroccan TRIGA Mark II research reactor. The management system covers among others, management of structures, critical components inspections, the control command system and nuclear instrumentation verification. The paper presents also how maintenance and periodic testing are organized and managed in the reactor module. Practical examples of ageing management actions of some systems and components during recent years are presented. (author)

Detecting sea-level hazards: Simple regression-based methods for calculating the acceleration of sea level

Science.gov (United States)

Doran, Kara S.; Howd, Peter A.; Sallenger,, Asbury H.

2016-01-04

This report documents the development of statistical tools used to quantify the hazard presented by the response of sea-level elevation to natural or anthropogenic changes in climate and ocean circulation. A hazard is a physical process (or processes) that, when combined with vulnerability (or susceptibility to the hazard), results in risk. This study presents the development and comparison of new and existing sea-level analysis methods, exploration of the strengths and weaknesses of the methods using synthetic time series, and when appropriate, synthesis of the application of the method to observed sea-level time series. These reports are intended to enhance material presented in peer-reviewed journal articles where it is not always possible to provide the level of detail that might be necessary to fully support or recreate published results.

The Idea of Physical Education: A Memetic Perspective

Science.gov (United States)

Tinning, Richard

2012-01-01

Background: Despite dire predictions of its demise, physical education continues to survive across most countries of the world. Moreover, the form of its survival is remarkably similar across cultures. Why has physical education survived as a cultural practice and why is its form so similar given the marked differences that exist between many…

Hazards in the chemical laboratory

International Nuclear Information System (INIS)

Bretherick, L.

1987-01-01

The contents of this book are: Preface; Introduction; Health and Safety at Work Act 1974; Safety Planning and Management; Fire Protection; Reactive Chemical Hazards; Chemical Hazards and Toxicology; Health Care and First Aid; Hazardous Chemicals; Precautions against Radiations; and An American View

Technological options for management of hazardous wastes from US Department of Energy facilities

Energy Technology Data Exchange (ETDEWEB)

Chiu, S.; Newsom, D.; Barisas, S.; Humphrey, J.; Fradkin, L.; Surles, T.

1982-08-01

This report provides comprehensive information on the technological options for management of hazardous wastes generated at facilities owned or operated by the US Department of Energy (DOE). These facilities annually generate a large quantity of wastes that could be deemed hazardous under the Resource Conservation and Recovery Act (RCRA). Included in these wastes are liquids or solids containing polychlorinated biphenyls, pesticides, heavy metals, waste oils, spent solvents, acids, bases, carcinogens, and numerous other pollutants. Some of these wastes consist of nonnuclear hazardous chemicals; others are mixed wastes containing radioactive materials and hazardous chemicals. Nearly 20 unit processes and disposal methods are presented in this report. They were selected on the basis of their proven utility in waste management and potential applicability at DOE sites. These technological options fall into five categories: physical processes, chemical processes, waste exchange, fixation, and ultimate disposal. The options can be employed for either resource recovery, waste detoxification, volume reduction, or perpetual storage. Detailed descriptions of each technological option are presented, including information on process performance, cost, energy and environmental considerations, waste management of applications, and potential applications at DOE sites. 131 references, 25 figures, 23 tables.

Technological options for management of hazardous wastes from US Department of Energy facilities

International Nuclear Information System (INIS)

Chiu, S.; Newsom, D.; Barisas, S.; Humphrey, J.; Fradkin, L.; Surles, T.

1982-08-01

This report provides comprehensive information on the technological options for management of hazardous wastes generated at facilities owned or operated by the US Department of Energy (DOE). These facilities annually generate a large quantity of wastes that could be deemed hazardous under the Resource Conservation and Recovery Act (RCRA). Included in these wastes are liquids or solids containing polychlorinated biphenyls, pesticides, heavy metals, waste oils, spent solvents, acids, bases, carcinogens, and numerous other pollutants. Some of these wastes consist of nonnuclear hazardous chemicals; others are mixed wastes containing radioactive materials and hazardous chemicals. Nearly 20 unit processes and disposal methods are presented in this report. They were selected on the basis of their proven utility in waste management and potential applicability at DOE sites. These technological options fall into five categories: physical processes, chemical processes, waste exchange, fixation, and ultimate disposal. The options can be employed for either resource recovery, waste detoxification, volume reduction, or perpetual storage. Detailed descriptions of each technological option are presented, including information on process performance, cost, energy and environmental considerations, waste management of applications, and potential applications at DOE sites. 131 references, 25 figures, 23 tables

Longitudinal changes in physical self-perceptions and associations with physical activity during adolescence.

Science.gov (United States)

Inchley, Jo; Kirby, Jo; Currie, Candace

2011-05-01

The purpose of this study was to examine adolescents' physical self-perceptions and their associations with physical activity using a longitudinal perspective. Utilizing data from the Physical Activity in Scottish Schoolchildren (PASS) study, changes in exercise self-efficacy, perceived competence, global self-esteem and physical self-worth were assessed among a sample of 641 Scottish adolescents from age 11-15 years. Girls reported lower levels of perceived competence, self-esteem and physical self-worth than boys at each age. Furthermore, girls' physical self-perceptions decreased markedly over time. Among boys, only perceived competence decreased, while global self-esteem increased. Baseline physical activity was a significant predictor of later activity levels for both genders. Findings demonstrate the importance of physical self-perceptions in relation to physical activity behavior among adolescents. Among older boys, high perceived competence increased the odds of being active by 3.8 times. Among older girls, high exercise self-efficacy increased the odds of being active by 5.2 times. There is a need for early interventions which promote increased physical literacy and confidence, particularly among girls.

Physics instrumentation for medical imaging

International Nuclear Information System (INIS)

Townsend, D.W.

1993-01-01

The first Nobel Physics Prize, awarded in 1901, went to Wilhelm Röntgen for his discovery of X-rays in 1895. This, and the most recent physics Nobel, to Georges Charpak last year for his detector developments, span several generations of applied science. As well as helping to launch the science of atomic physics, Röntgen's discovery also marked the dawn of a medical science - radiography - using beams of various kinds to image what otherwise cannot be seen. Ever since, physicists and radiologists have worked hand in hand to improve imaging techniques and widen their medical applications

Physics instrumentation for medical imaging

Energy Technology Data Exchange (ETDEWEB)

Townsend, D. W. [Geneva University Hospital, Geneva (Switzerland)

1993-04-15

The first Nobel Physics Prize, awarded in 1901, went to Wilhelm Röntgen for his discovery of X-rays in 1895. This, and the most recent physics Nobel, to Georges Charpak last year for his detector developments, span several generations of applied science. As well as helping to launch the science of atomic physics, Röntgen's discovery also marked the dawn of a medical science - radiography - using beams of various kinds to image what otherwise cannot be seen. Ever since, physicists and radiologists have worked hand in hand to improve imaging techniques and widen their medical applications.

7 CFR 920.303 - Container marking regulations.

Science.gov (United States)

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Container marking regulations. 920.303 Section 920.303... Miscellaneous Provisions § 920.303 Container marking regulations. No handler shall ship any kiwifruit except in accordance with the following terms and conditions: (a) Each package or container of kiwifruit shall bear on...

St. Louis area earthquake hazards mapping project; seismic and liquefaction hazard maps

Science.gov (United States)

Cramer, Chris H.; Bauer, Robert A.; Chung, Jae-won; Rogers, David; Pierce, Larry; Voigt, Vicki; Mitchell, Brad; Gaunt, David; Williams, Robert; Hoffman, David; Hempen, Gregory L.; Steckel, Phyllis; Boyd, Oliver; Watkins, Connor M.; Tucker, Kathleen; McCallister, Natasha

2016-01-01

We present probabilistic and deterministic seismic and liquefaction hazard maps for the densely populated St. Louis metropolitan area that account for the expected effects of surficial geology on earthquake ground shaking. Hazard calculations were based on a map grid of 0.005°, or about every 500 m, and are thus higher in resolution than any earlier studies. To estimate ground motions at the surface of the model (e.g., site amplification), we used a new detailed near‐surface shear‐wave velocity model in a 1D equivalent‐linear response analysis. When compared with the 2014 U.S. Geological Survey (USGS) National Seismic Hazard Model, which uses a uniform firm‐rock‐site condition, the new probabilistic seismic‐hazard estimates document much more variability. Hazard levels for upland sites (consisting of bedrock and weathered bedrock overlain by loess‐covered till and drift deposits), show up to twice the ground‐motion values for peak ground acceleration (PGA), and similar ground‐motion values for 1.0 s spectral acceleration (SA). Probabilistic ground‐motion levels for lowland alluvial floodplain sites (generally the 20–40‐m‐thick modern Mississippi and Missouri River floodplain deposits overlying bedrock) exhibit up to twice the ground‐motion levels for PGA, and up to three times the ground‐motion levels for 1.0 s SA. Liquefaction probability curves were developed from available standard penetration test data assuming typical lowland and upland water table levels. A simplified liquefaction hazard map was created from the 5%‐in‐50‐year probabilistic ground‐shaking model. The liquefaction hazard ranges from low (60% of area expected to liquefy) in the lowlands. Because many transportation routes, power and gas transmission lines, and population centers exist in or on the highly susceptible lowland alluvium, these areas in the St. Louis region are at significant potential risk from seismically induced liquefaction and associated

Effects of physical activity and sedentary time on the risk of heart failure.

Science.gov (United States)

Young, Deborah Rohm; Reynolds, Kristi; Sidell, Margo; Brar, Somjot; Ghai, Nirupa R; Sternfeld, Barbara; Jacobsen, Steven J; Slezak, Jeffrey M; Caan, Bette; Quinn, Virginia P

2014-01-01

Although the benefits of physical activity for risk of coronary heart disease are well established, less is known about its effects on heart failure (HF). The risk of prolonged sedentary behavior on HF is unknown. The study cohort included 82 695 men aged≥45 years from the California Men's Health Study without prevalent HF who were followed up for 10 years. Physical activity, sedentary time, and behavioral covariates were obtained from questionnaires, and clinical covariates were determined from electronic medical records. Incident HF was identified through International Classification of Diseases, Ninth Revision codes recorded in electronic records. During a mean follow-up of 7.8 years (646 989 person-years), 3473 men were diagnosed with HF. Controlling for sedentary time, sociodemographics, hypertension, diabetes mellitus, unfavorable lipid levels, body mass index, smoking, and diet, the hazard ratio (95% confidence interval [CI]) of HF in the lowest physical activity category compared with those in the highest category was 1.52 (95% CI, 1.39-1.68). Those in the medium physical activity category were also at increased risk (hazard ratio, 1.17 [95% CI, 1.06-1.29]). Controlling for the same covariates and physical activity, the hazard ratio (95% CI) of HF in the highest sedentary category compared with the lowest was 1.34 (95% CI, 1.21-1.48). Medium sedentary time also conveyed risk (hazard ratio, 1.13 [95% CI, 1.04-1.24]). Results showed similar trends across white and Hispanic subgroups, body mass index categories, baseline hypertension status, and prevalent coronary heart disease. Both physical activity and sedentary time may be appropriate intervention targets for preventing HF.

Hazardous solvent substitution

International Nuclear Information System (INIS)

Twitchell, K.E.

1995-01-01

This article is an overview of efforts at INEL to reduce the generation of hazardous wastes through the elimination of hazardous solvents. To aid in their efforts, a number of databases have been developed and will become a part of an Integrated Solvent Substitution Data System. This latter data system will be accessible through Internet

27 CFR 19.612 - Authorized abbreviations to identify marks.

Science.gov (United States)

2010-04-01

... T Tax Determined TD Wine Spirits Addition WSA (Sec. 201, Pub. L. 85-859, 72 Stat. 1360, as amended... TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Containers and Marks... to identify certain marks: Mark Abbreviation Completely Denatured Alcohol CDA Distilled Spirits...

Modified hazard ranking system for sites with mixed radioactive and hazardous wastes. User manual

International Nuclear Information System (INIS)

Hawley, K.A.; Peloquin, R.A.; Stenner, R.D.

1986-04-01

This document describes both the original Hazard Ranking System and the modified Hazard Ranking System as they are to be used in evaluating the relative potential for uncontrolled hazardous substance facilities to cause human health or safety problems or ecological or environmental damage. Detailed instructions for using the mHRS/HRS computer code are provided, along with instructions for performing the calculations by hand. Uniform application of the ranking system will permit the DOE to identify those releases of hazardous substances that pose the greatest hazard to humans or the environment. However, the mHRS/HRS by itself cannot establish priorities for the allocation of funds for remedial action. The mHRS/HRS is a means for applying uniform technical judgment regarding the potential hazards presented by a facility relative to other facilities. It does not address the feasibility, desirability, or degree of cleanup required. Neither does it deal with the readiness or ability of a state to carry out such remedial action, as may be indicated, or to meet other conditions prescribed in CERCLA. 13 refs., 13 figs., 27 tabs

Modified hazard ranking system for sites with mixed radioactive and hazardous wastes. User manual.

Energy Technology Data Exchange (ETDEWEB)

Hawley, K.A.; Peloquin, R.A.; Stenner, R.D.

1986-04-01

This document describes both the original Hazard Ranking System and the modified Hazard Ranking System as they are to be used in evaluating the relative potential for uncontrolled hazardous substance facilities to cause human health or safety problems or ecological or environmental damage. Detailed instructions for using the mHRS/HRS computer code are provided, along with instructions for performing the calculations by hand. Uniform application of the ranking system will permit the DOE to identify those releases of hazardous substances that pose the greatest hazard to humans or the environment. However, the mHRS/HRS by itself cannot establish priorities for the allocation of funds for remedial action. The mHRS/HRS is a means for applying uniform technical judgment regarding the potential hazards presented by a facility relative to other facilities. It does not address the feasibility, desirability, or degree of cleanup required. Neither does it deal with the readiness or ability of a state to carry out such remedial action, as may be indicated, or to meet other conditions prescribed in CERCLA. 13 refs., 13 figs., 27 tabs.

Hazardous solvent substitution

International Nuclear Information System (INIS)

Twitchell, K.E.

1995-01-01

Eliminating hazardous solvents is good for the environment, worker safety, and the bottom line. However, even though we are motivated to find replacements, the big question is 'What can we use as replacements for hazardous solvents?'You, too, can find replacements for your hazardous solvents. All you have to do is search for them. Search through the vendor literature of hundreds of companies with thousands of products. Ponder the associated material safety data sheets, assuming of course that you can obtain them and, having obtained them, that you can read them. You will want to search the trade magazines and other sources for product reviews. You will want to talk to users about how well the product actually works. You may also want to check US Environmental Protection Agency (EPA) and other government reports for toxicity and other safety information. And, of course, you will want to compare the product's constituent chemicals with the many hazardous constituency lists to ensure the safe and legal use of the product in your workplace

The national hydrologic bench-mark network

Science.gov (United States)

Cobb, Ernest D.; Biesecker, J.E.

1971-01-01

The United States is undergoing a dramatic growth of population and demands on its natural resources. The effects are widespread and often produce significant alterations of the environment. The hydrologic bench-mark network was established to provide data on stream basins which are little affected by these changes. The network is made up of selected stream basins which are not expected to be significantly altered by man. Data obtained from these basins can be used to document natural changes in hydrologic characteristics with time, to provide a better understanding of the hydrologic structure of natural basins, and to provide a comparative base for studying the effects of man on the hydrologic environment. There are 57 bench-mark basins in 37 States. These basins are in areas having a wide variety of climate and topography. The bench-mark basins and the types of data collected in the basins are described.

Progress report - physical sciences - physics division 1991 January 01 - June 30

International Nuclear Information System (INIS)

1991-09-01

This is the second in the new series of reports for the Physics Division since the creation of the Physical Sciences Unit in 1990. This report has been subdivided into three self-contained sections covering the activities in the branches for Accelerator Physics, Neutron and Solid State Physics and Theoretical Physics. It is noteworthy that the RFQ1 program with the original vanes has come to a successful conclusion having accelerated 79 mA of protons to 600 keV. The new vanes to achieve a high energy of 1.2 MeV have now been installed and will form the basis for the low energy end of high current proton accelerator development. The progress in the neutron scattering program has been hampered by the NRU reactor being down for repairs since January 1991. Nevertheless a very successful opening ceremony was held to mark the completion of the new DUALSPEC spectrometers and several workshops have been held to promote the understanding of neutron scattering

Industrial hazard and safety handbook

CERN Document Server

King, Ralph W

1979-01-01

Industrial Hazard and Safety Handbook (Revised Impression) describes and exposes the main hazards found in industry, with emphasis on how these hazards arise, are ignored, are identified, are eliminated, or are controlled. These hazard conditions can be due to human stresses (for example, insomnia), unsatisfactory working environments, as well as secret industrial processes. The book reviews the cost of accidents, human factors, inspections, insurance, legal aspects, planning for major emergencies, organization, and safety measures. The text discusses regulations, codes of practice, site layou

46 CFR 160.077-31 - PFD Marking.

Science.gov (United States)

2010-10-01

... Marking. (a) General. Each hybrid PFD must be marked with the applicable information required by this... text of special purpose or limitation and vessel(s) or vessel type(s), noted on approval certificate... and be presented in the exact order shown: Type [II, III, or V, as applicable] PFD [See paragraph (k...

Global Landslide Hazard Distribution

Data.gov (United States)

National Aeronautics and Space Administration — Global Landslide Hazard Distribution is a 2.5 minute grid of global landslide and snow avalanche hazards based upon work of the Norwegian Geotechnical Institute...

9 CFR 590.418 - Supervision of marking and packaging.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Supervision of marking and packaging...) Identifying and Marking Product § 590.418 Supervision of marking and packaging. (a) Evidence of label approval... has on file evidence that such official identification or packaging material bearing such official...

PENERAPAN SISTEM HAZARD ANALYSIS CRITICAL CONTROL POINT (HACCP PADA PROSES PEMBUATAN KERIPIK TEMPE

Directory of Open Access Journals (Sweden)

Rahmi Yuniarti

2015-06-01

Full Text Available Malang is one of the industrial centers of tempe chips. To maintain the quality and food safety, analysis is required to identify the hazards during the production process. This study was conducted to identify the hazards during the production process of tempe chips and provide recommendations for developing a HACCP system. The phases of production process of tempe chips are started from slice the tempe, move it to the kitchen, coat it with flour dough, fry it in the pan, drain it, package it, and then storage it. There are 3 types of potential hazards in terms of biological, physical, and chemical during the production process. With the CCP identification, there are three processes that have Critical Control Point. There are the process of slicing tempe, immersion of tempe into the flour mixture and draining. Recommendations for the development of HACCP systems include recommendations related to employee hygiene, supporting equipment, 5-S analysis, and the production layout.

Lane marking detection based on waveform analysis and CNN

Science.gov (United States)

Ye, Yang Yang; Chen, Hou Jin; Hao, Xiao Li

2017-06-01

Lane markings detection is a very important part of the ADAS to avoid traffic accidents. In order to obtain accurate lane markings, in this work, a novel and efficient algorithm is proposed, which analyses the waveform generated from the road image after inverse perspective mapping (IPM). The algorithm includes two main stages: the first stage uses an image preprocessing including a CNN to reduce the background and enhance the lane markings. The second stage obtains the waveform of the road image and analyzes the waveform to get lanes. The contribution of this work is that we introduce local and global features of the waveform to detect the lane markings. The results indicate the proposed method is robust in detecting and fitting the lane markings.

Comparison of landslide hazard and risk assessment practices in Europe

Science.gov (United States)

Corominas, J.; Mavrouli, O.

2012-04-01

defining the different hazard or risk levels and the number and physical interpretation of the latter. In this context suggestions are made to bridge the gaps between the practices and to enhance homogenization of the hazard and risk assessment procedures and of their outputs. This work is presented within the framework of the SafeLand project funded by the European Commission's FP7 programme.

Statistical methods for the forensic analysis of striated tool marks

Energy Technology Data Exchange (ETDEWEB)

Hoeksema, Amy Beth [Iowa State Univ., Ames, IA (United States)

2013-01-01

In forensics, fingerprints can be used to uniquely identify suspects in a crime. Similarly, a tool mark left at a crime scene can be used to identify the tool that was used. However, the current practice of identifying matching tool marks involves visual inspection of marks by forensic experts which can be a very subjective process. As a result, declared matches are often successfully challenged in court, so law enforcement agencies are particularly interested in encouraging research in more objective approaches. Our analysis is based on comparisons of profilometry data, essentially depth contours of a tool mark surface taken along a linear path. In current practice, for stronger support of a match or non-match, multiple marks are made in the lab under the same conditions by the suspect tool. We propose the use of a likelihood ratio test to analyze the difference between a sample of comparisons of lab tool marks to a field tool mark, against a sample of comparisons of two lab tool marks. Chumbley et al. (2010) point out that the angle of incidence between the tool and the marked surface can have a substantial impact on the tool mark and on the effectiveness of both manual and algorithmic matching procedures. To better address this problem, we describe how the analysis can be enhanced to model the effect of tool angle and allow for angle estimation for a tool mark left at a crime scene. With sufficient development, such methods may lead to more defensible forensic analyses.

Carbon Structure Hazard Control

Science.gov (United States)

Yoder, Tommy; Greene, Ben; Porter, Alan

2015-01-01

Carbon composite structures are widely used in virtually all advanced technology industries for a multitude of applications. The high strength-to-weight ratio and resistance to aggressive service environments make them highly desirable. Automotive, aerospace, and petroleum industries extensively use, and will continue to use, this enabling technology. As a result of this broad range of use, field and test personnel are increasingly exposed to hazards associated with these structures. No single published document exists to address the hazards and make recommendations for the hazard controls required for the different exposure possibilities from damaged structures including airborne fibers, fly, and dust. The potential for personnel exposure varies depending on the application or manipulation of the structure. The effect of exposure to carbon hazards is not limited to personnel, protection of electronics and mechanical equipment must be considered as well. The various exposure opportunities defined in this document include pre-manufacturing fly and dust, the cured structure, manufacturing/machining, post-event cleanup, and post-event test and/or evaluation. Hazard control is defined as it is applicable or applied for the specific exposure opportunity. The carbon exposure hazard includes fly, dust, fiber (cured/uncured), and matrix vapor/thermal decomposition products. By using the recommendations in this document, a high level of confidence can be assured for the protection of personnel and equipment.

UID...Leaving Its Mark on the Universe

Science.gov (United States)

Schramm, Harry F., Jr.

2008-01-01

Since 1975 bar codes on products at the retail counter have been accepted as the standard for entering product identity for price determination. Since the beginning of the 21 st century, the Data Matrix symbol has become accepted as the bar code format that is marked directly on a part, assembly or product that is durable enough to identify that item for its lifetime. NASA began the studies for direct part marking Data Matrix symbols on parts during the Return to Flight activities after the Challenger Accident. Over the 20 year period that has elapsed since Challenger, a mountain of studies, analyses and focused problem solutions developed by and for NASA have brought about world changing results. NASA Technical Standard 6002 and NASA Handbook 6003 for Direct Part Marking Data Matrix Symbols on Aerospace Parts have formed the basis for most other standards on part marking internationally. NASA and its commercial partners have developed numerous products and methods that addressed the difficulties of collecting part identification in aerospace operations. These products enabled the marking of Data Matrix symbols in virtually every situation and the reading of symbols at great distances, severe angles, under paint and in the dark without a light. Even unmarkable delicate parts now have a process to apply a chemical mixture, recently trademarked as Nanocodes, that can be converted to Data Matrix information through software. The accompanying intellectual property is protected by ten patents, several of which are licensed. Direct marking Data Matrix on NASA parts dramatically decreases data entry errors and the number of parts that go through their life cycle unmarked, two major threats to sound configuration management and flight safety. NASA is said to only have people and stuff with information connecting them. Data Matrix is one of the most significant improvements since Challenger to the safety and reliability of that connection.

UID....Now That's Gonna Leave A Mark

Science.gov (United States)

Schramm, Harry F., Jr.

2008-01-01

Since 1975 bar codes on products at the retail counter have been accepted as the standard for entering product identity for price determination. Since the beginning of the 21 st century, the Data Matrix symbol has become accepted as the bar code format that is marked directly on a part, assembly or product that is durable enough to identify that item for its lifetime. NASA began the studies for direct part marking Data Matrix symbols on parts during the Return to Flight activities after the Challenger Accident. Over the 20 year period that has elapsed since Challenger, a mountain of studies, analyses and focused problem solutions developed by and for NASA have brought about world changing results. NASA Technical Standard 6002 and NASA Handbook 6003 for Direct Part Marking Data Matrix Symbols on Aerospace Parts have formed the basis for most other standards on part marking internationally. NASA and its commercial partners have developed numerous products and methods that addressed the difficulties of collecting part identification in aerospace operations. These products enabled the marking of Data Matrix symbols in virtually every situation and the reading of symbols at great distances, severe angles, under paint and in the dark without a light. Even unmarkable delicate parts now have a process to apply a chemical mixture, recently trademarked as Nanocodes, that can be converted to Data Matrix information through software. The accompanying intellectual property is protected by ten patents, several of which are licensed. Direct marking Data Matrix on NASA parts dramatically decreases data entry errors and the number of parts that go through their life cycle unmarked, two major threats to sound configuration management and flight safety. NASA is said to only have people and stuff with information connecting them. Data Matrix is one of the most significant improvements since Challenger to the safety and reliability of that connection.

75 FR 73972 - Hazardous Waste Management System; Identification and Listing of Hazardous Waste; Removal of...

Science.gov (United States)

2010-11-30

... Waste Management System; Identification and Listing of Hazardous Waste; Removal of Direct Final.... Lists of Subjects in 40 CFR Part 261 Environmental Protection, Hazardous waste, Recycling, Reporting and... follows: PART 261--IDENTIFICATION AND LISTING OF HAZARDOUS WASTE 0 1. The authority citation for part 261...

Otolith marking of juvenile shortnose gar by immersion in oxytetracycline

Science.gov (United States)

Snow, Richard A.; Long, James M.

2017-01-01

Oxytetracycline (OTC) has been used to mark a variety of fish species at multiple developmental stages; however, there is little information on batch-marking Lepisosteidae. Juvenile Shortnose Gar Lepisosteus platostomus (53 ± 3 mm TL) were seined from an Oklahoma State University research pond and transported to the Oklahoma Fishery Research Lab. Juvenile Shortnose Gar were exposed to a range of OTC concentrations—0, 500, 600, and 700 mg/L—for 4, 5, or 6 h. Lapillus and sagitta otoliths were examined 14 d postexposure for mark presence and evaluation using fluorescent microscopy. Overall, 93.3% of otoliths exposed to OTC exhibited a mark. Concentration of OTC affected the mean mark quality, whereas duration and otolith type examined did not. However, as concentration increased, so did mortality, suggesting a balance is needed to achieve marking goals. Based on our findings, batch marking of Shortnose Gar can be successful at OTC concentrations from 500 to 700 mg/L for 4–6 h, although mark quality may vary and mortality rates increase at the higher concentrations and longer durations.

Science for common entrance physics : answers

CERN Document Server

Pickering, W R

2015-01-01

This book contains answers to all exercises featured in the accompanying textbook Science for Common Entrance: Physics , which covers every Level 1 and 2 topic in the ISEB 13+ Physics Common Entrance exam syllabus. - Clean, clear layout for easy marking. - Includes examples of high-scoring answers with diagrams and workings. - Suitable for ISEB 13+ Mathematics Common Entrance exams taken from Autumn 2017 onwards. Also available to purchase from the Galore Park website www.galorepark.co.uk :. - Science for Common Entrance: Physics. - Science for Common Entrance: Biology. - Science for Common En

Hazardous waste: cleanup and prevention

Science.gov (United States)

Vandas, Stephen; Cronin, Nancy L.; Farrar, Frank; Serrano, Guillermo Eliezer Ávila; Yajimovich, Oscar Efraín González; Muñoz, Aurora R.; Rivera, María del C.

1996-01-01

Our lifestyles are supported by complex Industrial activities that produce many different chemicals and chemical wastes. The Industries that produce our clothing, cars, medicines, paper, food, fuels, steel, plastics, and electric components use and discard thousands of chemicals every year. At home we may use lawn chemicals, solvents, disinfectants, cleaners, and auto products to Improve our quality of life. A chemical that presents a threat or unreasonable risk to people or the environment Is a hazardous material. When a hazardous material can no longer be used, It becomes a hazardous waste. Hazardous wastes come from a variety of sources, from both present and past activities. Impacts to human health and the environment can result from Improper handling and disposal of hazardous waste.

SRL process hazards review manual

International Nuclear Information System (INIS)

1980-08-01

The principal objective of the Process Hazards Management Program is to provide a regular, systematic review of each process at the Savannah River Laboratory (SRL) to eliminate injuries and to minimize property damage resulting from process hazards of catastrophic potential. Management effort is directed, through the Du Pont Safety Program, toward those controls and practices that ensure this objective. The Process Hazards Management Program provides an additional dimension to further ensure the health and safety of employees and the public. Du Pont has concluded that an organized approach is essential to obtain an effective and efficient process hazards review. The intent of this manual is to provide guidance in creating such an organized approach to performing process hazards reviews on a continuing basis

Hydrothermal Liquefaction Treatment Hazard Analysis Report

Energy Technology Data Exchange (ETDEWEB)

Lowry, Peter P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wagner, Katie A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-09-12

Hazard analyses were performed to evaluate the modular hydrothermal liquefaction treatment system. The hazard assessment process was performed in 2 stages. An initial assessment utilizing Hazard Identification and Preliminary Hazards Analysis (PHA) techniques identified areas with significant or unique hazards (process safety-related hazards) that fall outside of the normal operating envelope of PNNL and warranted additional analysis. The subsequent assessment was based on a qualitative What-If analysis. The analysis was augmented, as necessary, by additional quantitative analysis for scenarios involving a release of hazardous material or energy with the potential for affecting the public. The following selected hazardous scenarios received increased attention: •Scenarios involving a release of hazardous material or energy, controls were identified in the What-If analysis table that prevent the occurrence or mitigate the effects of the release. •Scenarios with significant consequences that could impact personnel outside the immediate operations area, quantitative analyses were performed to determine the potential magnitude of the scenario. The set of “critical controls” were identified for these scenarios (see Section 4) which prevent the occurrence or mitigate the effects of the release of events with significant consequences.

Hazardous Chemicals

Centers for Disease Control (CDC) Podcasts

2007-04-10

Chemicals are a part of our daily lives, providing many products and modern conveniences. With more than three decades of experience, The Centers for Disease Control and Prevention (CDC) has been in the forefront of efforts to protect and assess people's exposure to environmental and hazardous chemicals. This report provides information about hazardous chemicals and useful tips on how to protect you and your family from harmful exposure.  Created: 4/10/2007 by CDC National Center for Environmental Health.   Date Released: 4/13/2007.

78 FR 25101 - Proposal Review Panel for Physics, Notice of Meeting

Science.gov (United States)

2013-04-29

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Physics, Notice of Meeting In accordance... Physics, 1208 Date and Time: Tuesday, April 30, 2013; 8:00 a.m.-6:00 p.m., Wednesday, May 1, 2013, 8:00 a... Meeting: Partially Closed. Contact Person: Mark Coles, Director of Large Facilities, Division of Physics...

Criteria and Processes for the Certification of Non-Radioactive Hazardous and Non-Hazardous Wastes

International Nuclear Information System (INIS)

Dominick, J.

2008-01-01

Hazardous Waste Management (RHWM) organization is responsible for the review and maintenance of this document. It should be noted that the DOE metal recycling moratorium is still in effect and is implemented as outlined in reference 17 when metals are being dispositioned for disposal/re-use/recycling off-site. This document follows the same methodology as described in the previously approved 1992 Moratorium document. Generator knowledge and certification are the primary means of characterization. Sampling and analysis are used when there is insufficient knowledge of a waste to determine if it contains added radioactivity. Table 1 (page 12) presents a list of LLNL's analytical methods for evaluating volumetrically contaminated waste and updates the reasonably achievable analytical-method-specific Minimum Detectable Concentrations (MDCs) for various matrices. Results from sampling and analysis are compared against the maximum MDCs for the given analytical method and the sample specific MDC to determine if the sample contains DOE added volumetric radioactivity. The evaluation of an item that has a physical form, and history of use, such that accessible surfaces may be potentially contaminated, is based on DOE Order 5400.5 (Reference 3), and its associated implementation guidance document DOE G 441.1-XX, Control and Release of Property with Residual Radioactive Material (Reference 4). The guidance document was made available for use via DOE Memorandum (Reference 5). Waste and materials containing residual radioactivity transferred off-site must meet the receiving facilities Waste Acceptance Criteria (if applicable) and be in compliance with other applicable federal or state requirements

Radio-marking and in vivo imagery of oligonucleotides

International Nuclear Information System (INIS)

Kuehnast, Bertrand

2000-01-01

This research thesis is part of activities aimed at the development of new molecules like oligonucleotides. Its first objective was the development and validation of a marking method with fluorine-18 of oligonucleotides for their in-vivo pharmacological assessment with positron emission tomography (PET). Further investigations addressed the use of iodine-125 for oligonucleotide marking purpose. This radio-marking, and in vivo and ex vivo imagery techniques are described, and their potential is highlighted for the pharmacological assessment of different oligonucleotides

Technologies for the marking of fishing gear to identify gear components entangled on marine animals and to reduce abandoned, lost or otherwise discarded fishing gear.

Science.gov (United States)

He, Pingguo; Suuronen, Petri

2018-04-01

Fishing gears are marked to establish and inform origin, ownership and position. More recently, fishing gears are marked to aid in capacity control, reduce marine litter due to abandoned, lost or otherwise discarded fishing gear (ALDFG) and assist in its recovery, and to combat illegal, unreported and unregulated (IUU) fishing. Traditionally, physical marking, inscription, writing, color, shape, and tags have been used for ownership and capacity purposes. Buoys, lights, flags, and radar reflectors are used for marking of position. More recently, electronic devices have been installed on marker buoys to enable easier relocation of the gear by owner vessels. This paper reviews gear marking technologies with focus on coded wire tags, radio frequency identification tags, Automatic Identification Systems, advanced electronic buoys for pelagic longlines and fish aggregating devices, and re-location technology if the gear becomes lost. Copyright © 2018 Elsevier Ltd. All rights reserved.

Economic Impact Analyses of Interdisciplinary Multi-hazard Scenarios: ShakeOut and ARkStorm

Science.gov (United States)

Wein, A. M.; Rose, A.; Sue Wing, I.; Wei, D.

2011-12-01

U. S. Geological Survey (USGS) scientists are using an interdisciplinary strategy to develop and analyze multi-hazard scenarios to help communities enhance resilience to natural hazard disasters. Two such scenarios are the southern California ShakeOut earthquake and the California ARkStorm winter storm. Both scenarios are multi-hazard: Shakeout ground motions trigger landslides and liquefaction and ARkStorm involves wind, flood, landslide, and coastal hazards. A collaborative scenario-process engages partners and stakeholders throughout the development and use of the scenarios, In doing so, community resilience is enhanced by educating communities about hazards and hazard interdependencies, building networks from scientists to decision makers, exercising emergency management strategies, identifying emergency management issues, and motivating solutions prior to an event. In addition, interdisciplinary scenarios stimulate research on the various steps of analysis (e.g., natural hazard processes, physical damages, societal consequences, and policy connections). In particular, USGS scientists have collaborated with economists to advance methods to estimate the economic impacts (business interruption losses) of disasters. Our economic impact analyses evolved from the economic module in the Federal Emergency Management Agency's loss-estimation tool, HAZUS-MH, to a more encompassing input-output analysis for ShakeOut, to a more sophisticated Computable General Equilibrium model for ARkStorm. The analyses depend on physical damage and restoration time estimates from engineers and geographic analyses of economic assets in hazard zones. Economic resilience strategies are incorporated to represent resourcefulness and ingenuity that avoids potential losses during and after an event. Such strategies operate at three levels of the economy: micro (e.g., ability to catch up on lost production time), meso (e.g., coordination within a sector to share resources), and macro (e

In situ assessment of genotoxic hazards of environmental pollution.

Science.gov (United States)

Sandhu, S S; Lower, W R

1989-01-01

The potential impact of the environmental pollutants on human health can be evaluated by the laboratory analysis of the environmental samples or by the measurement of the biological effects on indigenous populations and/or specific test organisms placed in the environment to be monitored. A canary in a cage, used by 19th century miners as a biological indicator for rising levels of toxic gases, is a classical example of in situ hazard identification. The induced toxic effects are often the result of synergistic and antagonistic interactions among various physical and chemical factors that are difficult to reproduce in the laboratory. Therefore, conceivably the biological effects measured on or near the impacted site have greater relevancy for hazard assessment to man than from the data derived from the environmental samples analyzed in the lab. The organisms most commonly employed for the assessment of mutagenicity under real-world conditions are: (1) flowering plants, (2) wild and captive mammals, and (3) aquatic vertebrates. Plant species such as Tradescantia paludosa, Zea mays, and Osmunda regalis have been used for monitoring ambient air quality around several major industrial cities in the U.S.A., nuclear power plants, and industrial waste sites, and also for the assessment of potential health effects of municipal sewage sludges. Domestic animals such as dogs can be used as sentinels to provide information on the effects of contaminants in the environment and have been used to a limited extent to evaluate the environmental influences on the occurrence of breast cancer and osteosarcoma. Cytogenetic analysis from feral and wild animals has been employed for assessing the health hazards and prioritizing the clean-up efforts at hazardous waste sites. Aquatic animals have been used more often than terrestrial animals or plants to identify and characterize the genotoxic effects of environmental pollution. Since 1970, a number of studies has been reported on the

Regional landslide hazard assessment in a deep uncertain future

Science.gov (United States)

Almeida, Susana; Holcombe, Liz; Pianosi, Francesca; Wagener, Thorsten

2017-04-01

Landslides have many negative economic and societal impacts, including the potential for significant loss of life and damage to infrastructure. These risks are likely to be exacerbated in the future by a combination of climatic and socio-economic factors. Climate change, for example, is expected to increase the occurrence of rainfall-triggered landslides, because a warmer atmosphere tends to produce more high intensity rainfall events. Prediction of future changes in rainfall, however, is subject to high levels of uncertainty, making it challenging for decision-makers to identify the areas and populations that are most vulnerable to landslide hazards. In this study, we demonstrate how a physically-based model - the Combined Hydrology and Stability Model (CHASM) - can be used together with Global Sensitivity Analysis (GSA) to explore the underlying factors controlling the spatial distribution of landslide risks across a regional landscape, while also accounting for deep uncertainty around future rainfall conditions. We demonstrate how GSA can used to analyse CHASM which in turn represents the spatial variability of hillslope characteristics in the study region, while accounting for other uncertainties. Results are presented in the form of landslide hazard maps, utilising high-resolution digital elevation datasets for a case study in St Lucia in the Caribbean. Our findings about spatial landslide hazard drivers have important implications for data collection approaches and for long-term decision-making about land management practices.

Field manual for identifying and preserving high-water mark data

Science.gov (United States)

Feaster, Toby D.; Koenig, Todd A.

2017-09-26

This field manual provides general guidance for identifying and collecting high-water marks and is meant to be used by field personnel as a quick reference. The field manual describes purposes for collecting and documenting high-water marks along with the most common types of high-water marks. The manual provides a list of suggested field equipment, describes rules of thumb and best practices for finding high-water marks, and describes the importance of evaluating each high-water mark and assigning a numeric uncertainty value as part of the flagging process. The manual also includes an appendix of photographs of a variety of high-water marks obtained from various U.S. Geological Survey field investigations along with general comments about the logic for the assigned uncertainty values.

Transportation of Hazardous Evidentiary Material.

Energy Technology Data Exchange (ETDEWEB)

Osborn, Douglas.

2005-06-01

This document describes the specimen and transportation containers currently available for use with hazardous and infectious materials. A detailed comparison of advantages, disadvantages, and costs of the different technologies is included. Short- and long-term recommendations are also provided.3 DraftDraftDraftExecutive SummaryThe Federal Bureau of Investigation's Hazardous Materials Response Unit currently has hazardous material transport containers for shipping 1-quart paint cans and small amounts of contaminated forensic evidence, but the containers may not be able to maintain their integrity under accident conditions or for some types of hazardous materials. This report provides guidance and recommendations on the availability of packages for the safe and secure transport of evidence consisting of or contaminated with hazardous chemicals or infectious materials. Only non-bulk containers were considered because these are appropriate for transport on small aircraft. This report will addresses packaging and transportation concerns for Hazardous Classes 3, 4, 5, 6, 8, and 9 materials. If the evidence is known or suspected of belonging to one of these Hazardous Classes, it must be packaged in accordance with the provisions of 49 CFR Part 173. The anthrax scare of several years ago, and less well publicized incidents involving unknown and uncharacterized substances, has required that suspicious substances be sent to appropriate analytical laboratories for analysis and characterization. Transportation of potentially hazardous or infectious material to an appropriate analytical laboratory requires transport containers that maintain both the biological and chemical integrity of the substance in question. As a rule, only relatively small quantities will be available for analysis. Appropriate transportation packaging is needed that will maintain the integrity of the substance, will not allow biological alteration, will not react chemically with the substance being

Determination of Erosion Hazard Level And Bio-Mechanical Conservation In Post Merapi Eruption Land At Srumbung Magelang

Directory of Open Access Journals (Sweden)

S Setyo Wardoyo

2016-08-01

Full Text Available The purpose of this study was to determine the Erosion hazard, to look for conservation of bio - mechanical techniques are appropriate . Research methods with overlies topographic maps, soil maps, land use maps, to obtain a Land Unit Map. Determined soil physical properties (texture, structure, permeability and chemical properties of soil (soil organic matter, slope, slope length, broad of land unit, crops factor and value conservation factors that have been there for Land Unit. Each land unit is determined the amount of land erosion and erosion hazard level. Erosion hazard level is determined based on soil erosion, and soil depth. Erosion hazzard level is used to determine the bio-mechanical conservation, according Hardjowigeno and Sukmana (1995. The results showed that the highest erosion hazard level with an area of 12.947 ha is classified weight (Land unit 15A, and the classification of an area of 14.665 ha is clssified moderately (Land unit 6A. Soil conservation is done in areas with highest erosion hazard level by making individual terraces and “kerandang” planted as a cover crops.

Comparative Distributions of Hazard Modeling Analysis

Directory of Open Access Journals (Sweden)

Rana Abdul Wajid

2006-07-01

Full Text Available In this paper we present the comparison among the distributions used in hazard analysis. Simulation technique has been used to study the behavior of hazard distribution modules. The fundamentals of Hazard issues are discussed using failure criteria. We present the flexibility of the hazard modeling distribution that approaches to different distributions.

30 CFR 47.21 - Identifying hazardous chemicals.

Science.gov (United States)

2010-07-01

..., subpart Z, Toxic and Hazardous Substances. (4) American Conference of Governmental Industrial Hygienists... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Identifying hazardous chemicals. 47.21 Section... TRAINING HAZARD COMMUNICATION (HazCom) Hazard Determination § 47.21 Identifying hazardous chemicals. The...

Survival and reproduction of radio-marked adult spotted owls.

Science.gov (United States)

C.C. Foster; E.D. Forsman; E.C. Meslow; G.S. Miller; J.A. Reid; F.F. Wagner; A.B. Carey; J.B. Lint

1992-01-01

We compared survival, reproduction, and body mass of radio-marked and non radio-marked spotted owls (Strix occidentalis) to determine if backpack radios influenced reproduction or survival. In most study areas and years, there were no differences (P > 0.05) in survival of males and females or in survival of radio-marked versus banded owls. There...

Elementary particle physics and high energy phenomena

International Nuclear Information System (INIS)

Barker, A.R.; Cumalat, J.P.; de Alwis, S.P.; DeGrand, T.A.; Ford, W.T.; Mahanthappa, K.T.; Nauenberg, U.; Rankin, P.; Smith, J.G.

1992-06-01

This report discusses the following research in high energy physics: the properties of the z neutral boson with the SLD detector; the research and development program for the SDC muon detector; the fixed-target k-decay experiments; the Rocky Mountain Consortium for HEP; high energy photoproduction of states containing heavy quarks; and electron-positron physics with the CLEO II and Mark II detectors. (LSP)

Elementary particle physics and high energy phenomena

Energy Technology Data Exchange (ETDEWEB)

Barker, A.R.; Cumalat, J.P.; de Alwis, S.P.; DeGrand, T.A.; Ford, W.T.; Mahanthappa, K.T.; Nauenberg, U.; Rankin, P.; Smith, J.G.

1992-06-01

This report discusses the following research in high energy physics: the properties of the z neutral boson with the SLD detector; the research and development program for the SDC muon detector; the fixed-target k-decay experiments; the Rocky Mountain Consortium for HEP; high energy photoproduction of states containing heavy quarks; and electron-positron physics with the CLEO II and Mark II detectors. (LSP).

Physics before and after Einstein

CERN Document Server

Capria, M Mamone

2005-01-01

It is now a century ago that one of the icons of modern physics published some of the most influential scientific papers of all times. With his work on relativity and quantum theory, Albert Einstein has altered the field of physics forever. It should not come as a surprise that looking back at Einstein''s work, one needs to rethink the whole scope of physics, before and after his time. This books aims to provide a perspective on the history of modern physics, spanning from the late 19th century up to today. It is not an encyclopaedic work, but it presents the groundbreaking and sometimes provocative main contributions by Einstein as marking the line between ''old'' and ''new'' physics, and expands on some of the developments and open issues to which they gave rise.

76 FR 74709 - Hazardous Waste Management System; Identification and Listing of Hazardous Waste; Final Exclusion

Science.gov (United States)

2011-12-01

..., including any sludge, spill residue, ash, emission control dust, or leachate, remains a hazardous waste... water for use as a cleaning agent. The slop oil waste is thereby diluted and hazardous constituents are... separation sludges that are listed as hazardous wastes due to benzene, benzo(a)pyrene, chrysene, lead and...

75 FR 78918 - Hazardous Waste Management System; Identification and Listing of Hazardous Waste; Removal of...

Science.gov (United States)

2010-12-17

... and Community Right-to-Know Act FDA Food and Drug Administration HSWA Hazardous and Solid Waste...(f)), and hazardous substances (40 CFR 302.4) based solely upon the evidence that it is a potential... subsequently identified as hazardous wastes in Sec. 261.33(f) based solely on their potential for carcinogenic...

Modified Hazard Ranking System/Hazard Ranking System for sites with mixed radioactive and hazardous wastes: Software documentation

Energy Technology Data Exchange (ETDEWEB)

Stenner, R.D.; Peloquin, R.A.; Hawley, K.A.

1986-11-01

The mHRS/HRS software package was developed by the Pacific Northwest Laboratory (PNL) under contract with the Department of Energy (DOE) to provide a uniform method for DOE facilities to use in performing their Conservation Environmental Response Compensation and Liability Act (CERCLA) Phase I Modified Hazard Ranking System or Hazard Ranking System evaluations. The program is designed to remove the tedium and potential for error associated with the performing of hand calculations and the interpreting of information on tables and in reference books when performing an evaluation. The software package is designed to operate on a microcomputer (IBM PC, PC/XT, or PC/AT, or a compatible system) using either a dual floppy disk drive or a hard disk storage system. It is written in the dBASE III language and operates using the dBASE III system. Although the mHRS/HRS software package was developed for use at DOE facilities, it has direct applicability to the performing of CERCLA Phase I evaluations for any facility contaminated by hazardous waste. The software can perform evaluations using either the modified hazard ranking system methodology developed by DOE/PNL, the hazard ranking system methodology developed by EPA/MITRE Corp., or a combination of the two. This document is a companion manual to the mHRS/HRS user manual. It is intended for the programmer who must maintain the software package and for those interested in the computer implementation. This manual documents the system logic, computer programs, and data files that comprise the package. Hardware and software implementation requirements are discussed. In addition, hand calculations of three sample situations (problems) with associated computer runs used for the verification of program calculations are included.

Modified Hazard Ranking System/Hazard Ranking System for sites with mixed radioactive and hazardous wastes: Software documentation

International Nuclear Information System (INIS)

Stenner, R.D.; Peloquin, R.A.; Hawley, K.A.

1986-11-01

The mHRS/HRS software package was developed by the Pacific Northwest Laboratory (PNL) under contract with the Department of Energy (DOE) to provide a uniform method for DOE facilities to use in performing their Conservation Environmental Response Compensation and Liability Act (CERCLA) Phase I Modified Hazard Ranking System or Hazard Ranking System evaluations. The program is designed to remove the tedium and potential for error associated with the performing of hand calculations and the interpreting of information on tables and in reference books when performing an evaluation. The software package is designed to operate on a microcomputer (IBM PC, PC/XT, or PC/AT, or a compatible system) using either a dual floppy disk drive or a hard disk storage system. It is written in the dBASE III language and operates using the dBASE III system. Although the mHRS/HRS software package was developed for use at DOE facilities, it has direct applicability to the performing of CERCLA Phase I evaluations for any facility contaminated by hazardous waste. The software can perform evaluations using either the modified hazard ranking system methodology developed by DOE/PNL, the hazard ranking system methodology developed by EPA/MITRE Corp., or a combination of the two. This document is a companion manual to the mHRS/HRS user manual. It is intended for the programmer who must maintain the software package and for those interested in the computer implementation. This manual documents the system logic, computer programs, and data files that comprise the package. Hardware and software implementation requirements are discussed. In addition, hand calculations of three sample situations (problems) with associated computer runs used for the verification of program calculations are included

14 CFR 437.29 - Hazard analysis.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Hazard analysis. 437.29 Section 437.29... Documentation § 437.29 Hazard analysis. (a) An applicant must perform a hazard analysis that complies with § 437.55(a). (b) An applicant must provide to the FAA all the results of each step of the hazard analysis...

The California Hazards Institute

Science.gov (United States)

Rundle, J. B.; Kellogg, L. H.; Turcotte, D. L.

2006-12-01

California's abundant resources are linked with its natural hazards. Earthquakes, landslides, wildfires, floods, tsunamis, volcanic eruptions, severe storms, fires, and droughts afflict the state regularly. These events have the potential to become great disasters, like the San Francisco earthquake and fire of 1906, that overwhelm the capacity of society to respond. At such times, the fabric of civic life is frayed, political leadership is tested, economic losses can dwarf available resources, and full recovery can take decades. A patchwork of Federal, state and local programs are in place to address individual hazards, but California lacks effective coordination to forecast, prevent, prepare for, mitigate, respond to, and recover from, the harmful effects of natural disasters. Moreover, we do not know enough about the frequency, size, time, or locations where they may strike, nor about how the natural environment and man-made structures would respond. As California's population grows and becomes more interdependent, even moderate events have the potential to trigger catastrophes. Natural hazards need not become natural disasters if they are addressed proactively and effectively, rather than reactively. The University of California, with 10 campuses distributed across the state, has world-class faculty and students engaged in research and education in all fields of direct relevance to hazards. For that reason, the UC can become a world leader in anticipating and managing natural hazards in order to prevent loss of life and property and degradation of environmental quality. The University of California, Office of the President, has therefore established a new system-wide Multicampus Research Project, the California Hazards Institute (CHI), as a mechanism to research innovative, effective solutions for California. The CHI will build on the rich intellectual capital and expertise of the Golden State to provide the best available science, knowledge and tools for

Risk Governance of Multiple Natural Hazards: Centralized versus Decentralized Approach in Europe

Science.gov (United States)

Komendantova, Nadejda; Scolobig, Anna; Vinchon, Charlotte

2014-05-01

The multi-risk approach is a relatively new field and its definition includes the need to consider multiple hazards and vulnerabilities in their interdependency (Selva, 2013) and the current multi-hazards disasters, such as the 2011 Tohoku earthquake, tsunami and nuclear catastrophe, showed the need for a multi-risk approach in hazard mitigation and management. Our knowledge about multi-risk assessment, including studies from different scientific disciplines and developed assessment tools, is constantly growing (White et al., 2001). However, the link between scientific knowledge, its implementation and the results in terms of improved governance and decision-making have gained significantly less attention (IRGC, 2005; Kappes et al., 2012), even though the interest to risk governance, in general, has increased significantly during the last years (Verweiy and Thompson, 2006). Therefore, the key research question is how risk assessment is implemented and what is the potential for the implementation of a multi-risk approach in different governance systems across Europe. More precisely, how do the characteristics of risk governance, such as the degree of centralization versus decentralization, influence the implementation of a multi-risk approach. The methodology of this research includes comparative case study analysis of top-down and bottom-up interactions in governance in the city of Naples, (Italy), where the institutional landscape is marked by significant autonomy of Italian regions in decision-making processes for assessing the majority of natural risks, excluding volcanic, and in Guadeloupe, French West Indies, an overseas department of France, where the decision-making process is marked by greater centralization in decision making associated with a well established state governance within regions, delegated to the prefect and decentralised services of central ministries. The research design included documentary analysis and extensive empirical work involving

The Information Literacy of Survey Mark Hunting: A Dialogue

Directory of Open Access Journals (Sweden)

Jennifer Galas

2016-11-01

Full Text Available In Brief: This article makes connections between the ACRL Framework for Information Literacy for Higher Education and the activity of survey mark hunting. After a brief review of the literature related to geographic information systems (GIS, information literacy, and gamification of learning, the authors enter into a dialogue in which they discover and describe the various ways information literacy is both required by and developed through the recreational activity of survey mark hunting. Through their dialogue they found that the activity of survey mark hunting relies on the construction of both information and its authority in ways contextualized within the communities that participate; that survey mark hunting is a conversation that builds on the past, where lived experience counts as evidence; and, that survey mark hunting is both a metaphor and embodied enactment of information literacy.

Factors influencing survival and mark retention in postmetamorphic boreal chorus frogs

Science.gov (United States)

Swanson, Jennifer E; Bailey, Larissa L.; Muths, Erin L.; Funk, W. Chris

2013-01-01

The ability to track individual animals is crucial in many field studies and often requires applying marks to captured individuals. Toe clipping has historically been a standard marking method for wild amphibian populations, but more recent marking methods include visual implant elastomer and photo identification. Unfortunately, few studies have investigated the influence and effectiveness of marking methods for recently metamorphosed individuals and as a result little is known about this life-history phase for most amphibians. Our focus was to explore survival probabilities, mark retention, and mark migration in postmetamorphic Boreal Chorus Frogs (Psuedacris maculata) in a laboratory setting. One hundred forty-seven individuals were assigned randomly to two treatment groups or a control group. Frogs in the first treatment group were marked with visual implant elastomer, while frogs in the second treatment group were toe clipped. Growth and mortality were recorded for one year and resulting data were analyzed using known-fate models in Program MARK. Model selection results suggested that survival probabilities of frogs varied with time and showed some variation among marking treatments. We found that frogs with multiple toes clipped on the same foot had lower survival probabilities than individuals in other treatments, but individuals can be marked by clipping a single toe on two different feet without any mark loss or negative survival effects. Individuals treated with visual implant elastomer had a mark migration rate of 4% and mark loss rate of 6%, and also showed very little negative survival impacts relative to control individuals.

Occupational, social, and relationship hazards and psychological distress among low-income workers: implications of the 'inverse hazard law'.

Science.gov (United States)

Krieger, Nancy; Kaddour, Afamia; Koenen, Karestan; Kosheleva, Anna; Chen, Jarvis T; Waterman, Pamela D; Barbeau, Elizabeth M

2011-03-01

Few studies have simultaneously included exposure information on occupational hazards, relationship hazards (eg, intimate partner violence) and social hazards (eg, poverty and racial discrimination), especially among low-income multiracial/ethnic populations. A cross-sectional study (2003-2004) of 1202 workers employed at 14 worksites in the greater Boston area of Massachusetts investigated the independent and joint association of occupational, social and relationship hazards with psychological distress (K6 scale). Among this low-income cohort (45% were below the US poverty line), exposure to occupational, social and relationship hazards, per the 'inverse hazard law,' was high: 82% exposed to at least one occupational hazard, 79% to at least one social hazard, and 32% of men and 34% of women, respectively, stated they had been the perpetrator or target of intimate partner violence (IPV). Fully 15.4% had clinically significant psychological distress scores (K6 score ≥ 13). All three types of hazards, and also poverty, were independently associated with increased risk of psychological distress. In models including all three hazards, however, significant associations with psychological distress occurred among men and women for workplace abuse and high exposure to racial discrimination only; among men, for IPV; and among women, for high exposure to occupational hazards, poverty and smoking. Reckoning with the joint and embodied reality of diverse types of hazards involving how people live and work is necessary for understanding determinants of health status.

Occupational health hazards in veterinary medicine: Zoonoses and other biological hazards

Science.gov (United States)

Epp, Tasha; Waldner, Cheryl

2012-01-01

This study describes biological hazards reported by veterinarians working in western Canada obtained through a self-administered mailed questionnaire. The potential occupational hazards included as biological hazards were zoonotic disease events, exposure to rabies, injuries due to bites and scratches, and allergies. Only 16.7% (136/812) of responding veterinarians reported the occurrence of a zoonosis or exposure to rabies in the past 5 years; the most commonly reported event was ringworm. Most bites and scratches (86%) described by 586 veterinarians involved encounters with cats; 81% of the resulting 163 infections were due to cat bites or scratches. Approximately 38% of participants reported developing an allergy during their career, with 41% of the affected individuals altering the way they practiced in response to their allergy. PMID:22851775

There's Life in Hazard Trees

Science.gov (United States)

Mary Torsello; Toni McLellan

The goals of hazard tree management programs are to maximize public safety and maintain a healthy sustainable tree resource. Although hazard tree management frequently targets removal of trees or parts of trees that attract wildlife, it can take into account a diversity of tree values. With just a little extra planning, hazard tree management can be highly beneficial...

Negotiating geophysical hazards in Nepal: An interdisciplinary approach

Science.gov (United States)

Oven, Katie; Petley, Dave; Rosser, Nick; Dunn, Chris; Rigg, Jonathan

2010-05-01

It is widely accepted that the impact of natural hazards reflects not only the nature of geophysical processes but also the social conditions that prevail. The need for collaborative research to address these complex interactions between the natural and human systems is well recognised, however moving from theory to practice presents a number of significant challenges. How researchers frame problems; develop their research questions; select the methodologies to explore these questions; and privilege certain knowledges over others, can be seen to vary between physical and social science. Drawing on a case study examining the vulnerability of rural communities to landslides in the Upper Bhote Koshi Valley, Central Nepal, this paper explores how these barriers can be overcome and the benefits of undertaking interdisciplinary research within the natural hazards field. This research investigates the different framings of landslide risk and vulnerability from different stakeholder and disciplinary perspectives. Specifically, we ask: 1. Who is vulnerable to landslide hazard? 2. Why do people occupy landslide prone areas? 3. How do ‘at risk' rural communities perceive and respond to landslide hazard and risk? The findings, based on a series of participatory methodologies, challenge a number of assumptions made regarding landslide vulnerability in mountain communities. Within the Upper Bhote Koshi Valley clear transitions in settlement patterns, rural livelihoods and thus the occupation of landslide prone areas have been seen over time. For the majority of households, their decision to occupy these areas is driven by the economic and social benefits associated with the Arniko Highway which runs through the valley, linking Nepal with Tibet. Landslide vulnerability therefore emerges not just from societal marginalisation but also from situations of relative prosperity. The findings suggest that occupants of landslide prone areas have a good understanding of landslide hazard

Staff technical position on investigations to identify fault displacement hazards and seismic hazards at a geologic repository

International Nuclear Information System (INIS)

McConnell, K.I.; Blackford, M.E.; Ibrahim, A.K.

1992-07-01

The purpose of this Staff Technical Position (STP) is to provide guidance to the US Department of Energy (DOE) on acceptable geologic repository investigations that can be used to identify fault displacement hazards and seismic hazards. ne staff considers that the approach this STP takes to investigations of fault displacement and seismic phenomena is appropriate for the collection of sufficient data for input to analyses of fault displacement hazards and seismic hazards, both for the preclosure and postclosure performance periods. However, detailed analyses of fault displacement and seismic data, such as those required for comprehensive assessments of repository performance, may identify the need for additional investigations. Section 2.0 of this STP describes the 10 CFR Part 60 requirements that form the basis for investigations to describe fault displacement hazards and seismic hazards at a geologic repository. Technical position statements and corresponding discussions are presented in Sections 3.0 and 4.0, respectively. Technical position topics in this STP are categorized thusly: (1) investigation considerations, (2) investigations for fault-displacement hazards, and (3) investigations for seismic hazards

A Bayesian sampling strategy for hazardous waste site characterization

International Nuclear Information System (INIS)

Skalski, J.R.

1987-12-01

Prior knowledge based on historical records or physical evidence often suggests the existence of a hazardous waste site. Initial surveys may provide additional or even conflicting evidence of site contamination. This article presents a Bayes sampling strategy that allocates sampling at a site using this prior knowledge. This sampling strategy minimizes the environmental risks of missing chemical or radionuclide hot spots at a waste site. The environmental risk is shown to be proportional to the size of the undetected hot spot or inversely proportional to the probability of hot spot detection. 12 refs., 2 figs

Mark Antony’s Homoeroticism in Cicero’s second Philippic

Directory of Open Access Journals (Sweden)

Bruna Fernanda Abreu

2017-06-01

Full Text Available Considering the concept of homosexuality in the ancient Rome, we attempt to analise how Cicero expose the Mark Antony’s “homosexuality” in his second Philippic. This speech is characterized by political and, mainly, personal accusations from Cicero to Mark Antony, and the Mark Antony’s passivity in his intercourses can be considered a topos of this invective speech.

Coastal vulnerability: climate change and natural hazards perspectives

Science.gov (United States)

Romieu, E.; Vinchon, C.

2009-04-01

. This concept is a great tool for policy makers to help managing their action and taking into account climate change (McFadden, et al. 2006). However, in those approaches, vulnerability is the output itself (cost of effective impacts, geomorphologic impacts…), but is not integrated it in a risk analysis. Furthermore, those studies emerged from a climatic perspective, which leads to consider climate change as a hazard or pressure whereas risk studies commonly consider hazards such as erosion and flooding, where climate change modifies the drivers of the hazard. 2) The natural hazards and socio economic perspectives In order to reduce impacts of natural hazards, decision makers need a complete risk assessment (probability of losses). Past studies on natural risks (landslide, earthquake...) highlighted the pertinence of defining risk as a combination of : (1)hazard occurrence and intensity, (2) exposition and (3)vulnerability of assets and population to this hazard (e.g. Douglas. 2007, Sarewitz, et al. 2003). Following the Renn and Klinke risk assessment frame, high uncertainties associated with coastal risks considering climatic and anthropic change highlights the importance of working on that concept of "vulnerability" (Klinke and Renn. 2002). Past studies on vulnerability assessment showed a frequently mentioned gap between "impact based" and "human based" points of view. It is nowadays a great issue for natural risk sciences. Many research efforts in FP7 projects such as MOVE and ENSURE focus on integrating the different dimensions of vulnerability (Turner, et al. 2003, Birkmann. 2006). Coastal risk studies highlight another issue of concern. We previously detailed the different use of the term "vulnerability" in the coastal context, quite different of the "natural risk's" use. Interaction of social, economic and physical sciences is considered within two french research projects (Vulsaco, Miseeva), in order to identify the vulnerability of a system to flooding or

PHYSICAL PERFORMANCE AND BODY COMPOSITION IN MAINTENANCE HEMODIALYSIS (MHD PATIENTS

Directory of Open Access Journals (Sweden)

M Zhang

2012-06-01

Conclusions: These findings indicate that adult MHD pts had a higher % body fat. Measures of physical performance were markedly reduced in MHD pts as compared to Normals. Physical performance in MHD, measured especially by 6-MW, correlated negatively with some measures of body composition, particularly with LBMI.

Visual examination program of the TRIGA Mark II reactor Vienna with the nuclear underwater telescope

International Nuclear Information System (INIS)

Boeck, H.; Hammer, J.; Varga, K.

1985-12-01

The visual inspection programm carried out during a three month shut-period at the TRIGA Mark II reactor Vienna is described. Optical inspection of all welds inside the reactor tank was carried out with an underwater telescope developed by the Central Research Institute of Physics, Budapest, Hungary. It is shown that even after 23 years of reactor operation all tank internals were found to be in good condition and minor defects can be easily repaired by remote handling tools. (Author)

The Impact Hazard in the Context of Other Natural Hazards and Predictive Science

Science.gov (United States)

Chapman, C. R.

1998-09-01

The hazard due to impact of asteroids and comets has been recognized as analogous, in some ways, to other infrequent but consequential natural hazards (e.g. floods and earthquakes). Yet, until recently, astronomers and space agencies have felt no need to do what their colleagues and analogous agencies must do in order the assess, quantify, and communicate predictions to those with a practical interest in the predictions (e.g. public officials who must assess the threats, prepare for mitigation, etc.). Recent heightened public interest in the impact hazard, combined with increasing numbers of "near misses" (certain to increase as Spaceguard is implemented) requires that astronomers accept the responsibility to place their predictions and assessments in terms that may be appropriately considered. I will report on preliminary results of a multi-year GSA/NCAR study of "Prediction in the Earth Sciences: Use and Misuse in Policy Making" in which I have represented the impact hazard, while others have treated earthquakes, floods, weather, global climate change, nuclear waste disposal, acid rain, etc. The impact hazard presents an end-member example of a natural hazard, helping those dealing with more prosaic issues to learn from an extreme. On the other hand, I bring to the astronomical community some lessons long adopted in other cases: the need to understand the policy purposes of impact predictions, the need to assess potential societal impacts, the requirements to very carefully assess prediction uncertainties, considerations of potential public uses of the predictions, awareness of ethical considerations (e.g. conflicts of interest) that affect predictions and acceptance of predictions, awareness of appropriate means for publicly communicating predictions, and considerations of the international context (especially for a hazard that knows no national boundaries).

Implementation of hazard analysis and critical control point (HACCP) in dried anchovy production process

Science.gov (United States)

Citraresmi, A. D. P.; Wahyuni, E. E.

2018-03-01

The aim of this study was to inspect the implementation of Hazard Analysis and Critical Control Point (HACCP) for identification and prevention of potential hazards in the production process of dried anchovy at PT. Kelola Mina Laut (KML), Lobuk unit, Sumenep. Cold storage process is needed in each anchovy processing step in order to maintain its physical and chemical condition. In addition, the implementation of quality assurance system should be undertaken to maintain product quality. The research was conducted using a survey method, by following the whole process of making anchovy from the receiving raw materials to the packaging of final product. The method of data analysis used was descriptive analysis method. Implementation of HACCP at PT. KML, Lobuk unit, Sumenep was conducted by applying Pre Requisite Programs (PRP) and preparation stage consisting of 5 initial stages and 7 principles of HACCP. The results showed that CCP was found in boiling process flow with significant hazard of Listeria monocytogenesis bacteria and final sorting process with significant hazard of foreign material contamination in the product. Actions taken were controlling boiling temperature of 100 – 105°C for 3 - 5 minutes and training for sorting process employees.