Marie Curie's heritage

International Nuclear Information System (INIS)

Pajot, Ph.; Schaeffer, A.; Barhelemy, P.

2011-01-01

This issue is almost entirely dedicated to Marie Curie. The first part gives the main steps of her life, an article draws a parallel with Lise Meitner's life, another describes the instruments Marie Curie used to measure radioactivity and a third one gives an idea of the network of scientists she integrated. The second part presents the scientific heritage of Marie Curie, first the curietherapy then medical imaging and radiocarbon dating. The third part presents other achievements and commitments of Marie Curie concerning the place of women in a modern society and the social changes trough scientific progress. (A.C.)

Baking technique of JT-60

Energy Technology Data Exchange (ETDEWEB)

Arai, Takashi; Masaki, Kei; Miyachi, Kengo [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

1998-10-01

It needs to make low ultimate pressure to decrease impurities in a plasma in a nuclear fusion device. Baking technique is very effective method to decrease outgassing rate from first walls and inner surface of the vacuum vessel. However, in such large vacuum vessel, e.g. JT-60, the non-uniform heating and the deformation due to thermal expansion might be very important problems. The baking technique of JT-60 is described. Two baking systems were applied to JT-60 to solve the problem of non-uniform heating. One is a circulation system of the hot nitrogen gas which is located between the inner and outer skins of the double-skin structured vacuum vessel. The other is an electric heater which apply the thick of the vessel. In order to prevent the deformation, the difference of temperature was as small as possible. By both the baking at 300degC and the conditioning such as discharge cleaning, the ultimate pressure was achieved 7.9x10{sup -7} Pa. (author)

Baking technique of JT-60

International Nuclear Information System (INIS)

Arai, Takashi; Masaki, Kei; Miyachi, Kengo

1998-01-01

It needs to make low ultimate pressure to decrease impurities in a plasma in a nuclear fusion device. Baking technique is very effective method to decrease outgassing rate from first walls and inner surface of the vacuum vessel. However, in such large vacuum vessel, e.g. JT-60, the non-uniform heating and the deformation due to thermal expansion might be very important problems. The baking technique of JT-60 is described. Two baking systems were applied to JT-60 to solve the problem of non-uniform heating. One is a circulation system of the hot nitrogen gas which is located between the inner and outer skins of the double-skin structured vacuum vessel. The other is an electric heater which apply the thick of the vessel. In order to prevent the deformation, the difference of temperature was as small as possible. By both the baking at 300degC and the conditioning such as discharge cleaning, the ultimate pressure was achieved 7.9x10 -7 Pa. (author)

Fabrication of the vacuum vessel for JT-60 machine upgrade

International Nuclear Information System (INIS)

Uchikawa, T.; Takanabe, K.; Tsujimura, S.; Ue, K.; Oka, K.; Kuri, S.; Ioki, K.; Namiki, K.; Suzuki, Y.; Horliike, H.; Ninomiya, H.; Yamamoto, M.; Neyatani, Y.; Ando, T.; Matsukawa, M.

1992-01-01

The JT-60 tokamak was upgraded to double the plasma current to 6 MA. In the JT-60 machine upgrade (JT-60U), the vacuum vessel and poloidal field (PF) coils were renewed. The new vacuum vessel features a three-dimensionally curved, thin double-skin torus with multi-arc D-shaped cross section. The double-skin structure is strengthened with square pipes placed in between the outer and inner skins. Fabrication and site installation of the vessel was smoothly completed in February, 1991. This paper describes an overview of the JT-60U vacuum vessel construction

Physical design of JT-60 Super Upgrade

International Nuclear Information System (INIS)

Nagashima, K.; Kikuchi, M.; Kurita, G.; Ozeki, T.; Aoyagi, T.; Ushigusa, K.; Neyatani, Y.; Kubo, T.; Mori, K.; Nakagawa, S.; Kuriyama, M.; Nagami, M.

1997-01-01

The JT-60 Super Upgrade (JT-60SU) is an upgraded tokamak device of JT-60U for developing the steady-state reactor and advanced tokamak operation in the International Thermonuclear Experimental Reactor. The device is planned to utilize the JT-60 facilities fully and to minimize the needed modification. The major radius is 4.8 m and the maximum plasma current is 10 MA. Neutral beam injection with 750 keV beam energy is the primary heating method. The machine is capable of steady-state operation with high density up to 8.8 x 10 19 m -3 at 5 MA plasma current. The high operating density, over the Greenwald et al. limit, is critically important in order to achieve high bootstrap current fraction. Ballooning mode and low n ideal magnetohydrodynamic (MHD) mode including the bootstrap current were analyzed for steady-state operation. The current profile must be optimized to obtain a normalized beta up to 3. The plasma configuration with high triangularity was adopted in order to get good MHD stability and high energy confinement. A compact divertor was designed in order to get the large plasma space. (orig.)

Operation and management manual of JT-60 experimental data analysis system

International Nuclear Information System (INIS)

Hirayama, Takashi; Morishima, Soichi

2014-03-01

In the Japan Atomic Energy Agency Naka Fusion Institute, a lot of experiments have been conducted by using the large tokamak device JT-60 aiming to realize fusion power plant. In order to optimize the JT-60 experiment and to investigate complex characteristics of plasma, JT-60 experimental data analysis system was developed and used for collecting, referring and analyzing the JT-60 experimental data. Main components of the system are a data analysis server and a database server for the analyses and accumulation of the experimental data respectively. Other peripheral devices of the system are magnetic disk units, NAS (Network Attached Storage) device, and a backup tape drive. This is an operation and management manual the JT-60 experimental data analysis system. (author)

Darwin-industrien i højt gear

DEFF Research Database (Denmark)

Kjærgaard, Peter C.

2008-01-01

Darwin-industrien i højt gear. Næste år bliver et 'Darwin-år' - både tilhængere og kritikere gør sig klar. Udgivelsesdato: 12. december......Darwin-industrien i højt gear. Næste år bliver et 'Darwin-år' - både tilhængere og kritikere gør sig klar. Udgivelsesdato: 12. december...

Assembly study for JT-60SA tokamak

Energy Technology Data Exchange (ETDEWEB)

Shibanuma, K., E-mail: shibanuma.kiyoshi@jaea.go.jp [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Arai, T.; Hasegawa, K.; Hoshi, R.; Kamiya, K.; Kawashima, H.; Kubo, H.; Masaki, K.; Saeki, H.; Sakurai, S.; Sakata, S.; Sakasai, A.; Sawai, H.; Shibama, Y.K.; Tsuchiya, K.; Tsukao, N.; Yagyu, J.; Yoshida, K.; Kamada, Y. [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Mizumaki, S. [Toshiba Corporation, Minato-ku, Tokyo 105-8001 (Japan); and others

2013-10-15

The assembly scenarios and assembly tools of the major tokamak components for JT-60SA are studied in the following. (1) The assembly frame (with a dedicated 30-tonne crane), which is located around the JT-60SA tokamak, is adopted for effective assembly works in the torus hall and the temporary support of the components during assembly. (2) Metrology for precise positioning of the components is also studied by defining the metrology points on the components. (3) The sector segmentation for weld joints and positioning of the vacuum vessel (VV), the assembly scenario and tools for VV thermal shield (TS), the connection of the outer intercoil structure (OIS) and the installation of the final toroidal field coil (TFC) are studied, as typical examples of the assembly scenarios and tools for JT-60SA.

An algorithm for merging part nodes of JT models exported by FORAN

Directory of Open Access Journals (Sweden)

FANG Xiongbing

2017-05-01

Full Text Available Many cognominal parts exist in JT models exported by FORAN V70 R2.0 software, and this leads to an increase in time consumption and the space analysis results becoming hard to process when using clearance analysis software to perform distance computing for such JT models. Aiming at this problem, an algorithm for merging component nodes is put forward based on investigating the assembly configuration and inherent information (i.e. geometric and material information of JT models created by FORAN. The method is composed of four steps:coordinate transformation, model node renaming, node geometric data transferring and material attribute processing. Finally, the proposed method is implemented by C++ and JT Open Toolkit. The results show that the new JT models generated by the proposed method are comprised of only one assembly node, and they preserve the intrinsic information of the original JT models. Its validity is illustrated by a great deal of examples, and the content of the worked JT models are reduced by about 7% to 20%.

Development of integrated SOL/Divertor code and simulation study of the JT-60U/JT-60SA tokamaks

International Nuclear Information System (INIS)

Kawashima, H.; Shimizu, K.; Takizuka, T.

2007-01-01

To predict the particle and heat controllability in the divertor of tokamak reactors such as ITER and to optimize the divertor design, comprehensive simulations by integrated modelling with taking in various physical processes are indispensable. For the design study of ITER divertor, the modelling codes such as B2, UEDGE and EDGE2D have been developed, and their results have contributed to the evolution of the divertor concept. In Japan Atomic Energy Agency (JAEA), SOL/divertor codes have also been developed for the interpretation and the prediction on behaviours of plasmas, neutrals and impurities in the SOL/divertor regions. The code development is originally carried out since physics models can be verified quickly and flexibly under the circumstance of close collaboration with JT-60 team. Figure 1 shows our code system, which consists of the 2 dimensional fluid code SOLDOR, the neutral Monte Carlo (MC) code NEUT2D, and the impurity MC code IMPMC. The particle simulation code PARASOL has also been developed in order to establish the physics modelling used in fluid simulations. Integration of SOLDOR, NEUT2D and IMPMC, called the '' SONIC '' code, is being carried out to simulate self-consistently the SOL/divertor plasmas in present tokamaks and in future devices. Combination of the SOLDOR and NEUT2D was completed, which has the features such as 1) high-resolution oscillation-free scheme in solving fluid equations, 2) neutral transport calculation under the fine meshes, 3) success in reduction of MC noise, 4) optimization on the massive parallel computer, etc. The simulation reproduces the X-point MARFE in the JT-60U experiment. It is found that the chemically sputtered carbon at the dome causes the radiation peaking near the X-point. The performance of divertor pumping in JT-60U is evaluated from the particle balances. We also present the divertor designing of JT-60SA, which is the modification program of JT-60U to establish high beta steady-state operation. To

Data management facility for JT-60

International Nuclear Information System (INIS)

Ohasa, K.; Kurimoto, K.; Mochizuki, O.

1983-01-01

This study considers the Data Management Facility which is provided for unified management of various diagnostics data with JT-60 experiments. This facility is designed for the purpose of data access. There are about 30 kinds of diagnostic devices that are classified by diagnostic objects equipped for JT-60 facility. It gathers the diagnostic date about 10 Mega Byte per each discharge. Those diagnostic data are varied qualitatively and quantitatively by experimental purpose. Other fundamental information like discharge condition, adjustive value for diagnostic devices is required to process those gathered data

The archives of operational achievements in JT-60

International Nuclear Information System (INIS)

Seimiya, Munetaka

2007-08-01

Since the first plasma in JT-60 was achieved in April 1985, various experimental challenges have been successfully conducted, and currently producing many new findings. These achievements have been realized by large modifications for lower X-point divertor in 1987, for large plasma current upgrade in 1989-1991, for W-shaped divertor in 1997, and for long pulse discharge in 2002. Such developments contribute to have established JT-60 as the leading tokamak in the world. As a consequence of the 22-year operation, we have accumulated many operational and experimental data. This reports the operational records including troubles and availability, the outline of planning management, the safety control and the promotion procedure of operation in JT-60. (author)

Resisting the author: JT LeRoy's fictional authorship

NARCIS (Netherlands)

Loontjens, J.

2008-01-01

In the last decade, the interest in the relation between author and text, author and autobiography, seems to have grown. In my article, I use the story of the author JT LeRoy as a framework to analyse what this growing interest means for our understanding of the word "author." JT LeRoy’s work was

Advanced fusion technologies developed for JT-60 superconducting tokamak

International Nuclear Information System (INIS)

Sakasai, Akira; Ishida, S.; Matsukawa, M.

2003-01-01

The modification of JT-60U is planned as a full superconducting tokamak (JT-60SC). The objectives of the JT-60SC program are to establish scientific and technological bases for the steady-state operation of high performance plasmas and utilization of reduced-activation materials in economically and environmentally attractive DEMO reactor. Advanced fusion technologies relevant to DEMO reactor have been developed in the superconducting magnet technology and plasma facing components for the design of JT-60SC. To achieve a high current density in a superconducting strand, Nb 3 Al strands with a high copper ratio of 4 have been newly developed for the toroidal field coils (TFC) of JT-60SC. The R and D to demonstrate applicability of Nb 3 Al conductor to the TFC by a react-and-wind technique have been carried out using a full-size Nb 3 Al conductor. A full-size NbTi conductor with low AC loss using Ni-coated strands has been successfully developed. A forced cooling divertor component with high heat transfer using screw tubes has been developed for the first time. The heat removal performance of the CFC target was successfully demonstrated on the electron beam irradiation stand. (author)

Conceptual design of a new supervisory control system for JT-60SA

International Nuclear Information System (INIS)

Totsuka, Toshiyuki; Sakata, Shinya

2009-05-01

The functions of JT-60 discharge control computer system and the data processing computer system will be integrated into a new JT-60SA supervisory control system to improve the operational efficiency of the JT-60 control computer system. In this report, we first show the necessary requirements for the new JT-60SA supervisory control system that should have high cost performance and maintainability. Next, overall system image of the new JT-60SA supervisory control system is presented and the necessary functions and the issues to be solved in the development are shown. Finally, the necessary manpower for this development and performance of the computer hardware, and the expected reduction of maintenance cost of the computer system are described. (author)

Kaks Mari Vaalas / Eha Komissarov

Index Scriptorium Estoniae

Komissarov, Eha, 1947-

1999-01-01

9. nov.-st galeriis 'Vaal' Mari Roosvaldi maalinäitus 'Persoon'; 10. nov.-st galerii keldrisaalis Mari Kurismaa 'Matemaatika ja metafüüsika'. Mari Roosvaldi kollaazhides on ühendatud maal ja foto.

JT8D and JT9D jet engine performance improvement program. Task 1: Feasibility analysis

Science.gov (United States)

Gaffin, W. O.; Webb, D. E.

1979-01-01

JT8D and JT9D component performance improvement concepts which have a high probability of incorporation into production engines were identified and ranked. An evaluation method based on airline payback period was developed for the purpose of identifying the most promising concepts. The method used available test data and analytical models along with conceptual/preliminary designs to predict the performance improvements, weight, installation characteristics, cost for new production and retrofit, maintenance cost, and qualitative characteristics of candidate concepts. These results were used to arrive at the concept payback period, which is the time required for an airline to recover the investment cost of concept implementation.

Development of fast opening magnetic valve for JT-60 pellet injector

International Nuclear Information System (INIS)

Hiratsuka, Hajime; Kawasaki, Kouzo; Takatsu, Hideyuki; Miyo, Yasuhiko; Yoshioka, Yuji; Ohta, Kazuya; Shimizu, Masatsugu; Onozuka, Masanori; Uchikawa, Takashi; Iwamoto, Syuichi; Hashiri, Noboru

1989-01-01

A pneumatic four-pellet injector (JT-60 pellet injector) has been constructed for JT-60 in May, 1988. A fast opening magnetically driven propellant gas injection valve has been developed for JT-60 pellet injector. This valve can accelerate four cylindrical pellets, two 3.8 mm diameter by 3.8 mm and two 2.7 mm diameter by 2.7 mm, to greater than 1.6 km/s with propellent gas of up to 50 bar. It is now successfully in use in JT-60, contributing to plasma studies. In this paper the outline of a newly developed fast opening magnetic valve and the results of performance tests are presented. (author). 6 figs.; 1 tab

Heating experiments of JT-60

International Nuclear Information System (INIS)

1987-01-01

In JT-60, after the finish of the first stage Joule experiment, the heating facilities were installed, and the heating experiment was started in August, 1986. As to neutral beam injection, the beam injection experiment at the maximum rating 20 MW carried out, and also as to RF, the injection experiment up to 1.4 MW was carried out in both ion cyclotron and low band hybrid waves. The results worthy of special mention in the heating experiment were the success in the current drive up to 1.7 MA at maximum using low band hybrid waves and the improvement of plasma confinement characteristics obtained by the compound heating of NBI and RF. In this paper, the main results of these heating experiments and their significance are explained. The JT-60 is the testing facilities for attaining the critical plasma condition by additionally heating the plasma which is generated by Joule electric discharge with NBI and RF heatings. The experimental operation cycle of the JT-60 consists of the unit cycle of two weeks, and the number of days in operation is nine days. The temperature of heated plasma rose to 70 million deg C in the 20 MW NBI heating. Hereafter, the improvement of confinement time by increasing the stored energy of plasma is attempted. (Kako, I.)

Combined Brayton-JT cycles with refrigerants for natural gas liquefaction

Science.gov (United States)

Chang, Ho-Myung; Park, Jae Hoon; Lee, Sanggyu; Choe, Kun Hyung

2012-06-01

Thermodynamic cycles for natural gas liquefaction with single-component refrigerants are investigated under a governmental project in Korea, aiming at new processes to meet the requirements on high efficiency, large capacity, and simple equipment. Based upon the optimization theory recently published by the present authors, it is proposed to replace the methane-JT cycle in conventional cascade process with a nitrogen-Brayton cycle. A variety of systems to combine nitrogen-Brayton, ethane-JT and propane-JT cycles are simulated with Aspen HYSYS and quantitatively compared in terms of thermodynamic efficiency, flow rate of refrigerants, and estimated size of heat exchangers. A specific Brayton-JT cycle is suggested with detailed thermodynamic data for further process development. The suggested cycle is expected to be more efficient and simpler than the existing cascade process, while still taking advantage of easy and robust operation with single-component refrigerants.

Discharge optimization in JT-60

International Nuclear Information System (INIS)

Ninomiya, H.; Hosogane, N.; Kikuchi, M.; Yoshino, R.; Seki, S.; Kurihara, K.; Kimura, T.; Shimada, R.; Matsukawa, M.

1986-01-01

For the optimization of the feedback control gains of the plasma control system in JT-60, the plasma modelling by the regression analysis, the matrix transfer function analysis and the simulation study are performed. The experimental results of plasma control are well consistent with these estimations and the usefulness of a modelling by the regression analysis, the matrix transfer function analysis and the simulation study is experimentally confirmed. It is also shown that the regression analysis is useful for development of the sensor algorithm of plasma shape and location of separatrix line in a feedback control system. Some topics are also presented about plasma engineering obtained in JT-60: possibility to suppress the uncontrollability of plasma density, αI/sub p/ control for plasma position and volt-sec consumption

Dynamic design of gas sorption J-T refrigerator

International Nuclear Information System (INIS)

Chan, C.K.

1986-01-01

A long-life Joule-Thomson refrigerator which is heat powered, involves no sealing, and has few mechanical parts and is desirable for longterm sensor cooling in space. In the gas-sorption J-T refrigerator, cooling is achieved by gas sorption (either adsorption or absorption) processes. Currently, a modular, single-stage refrigerator is being designed and built to be operated at 20 K. The design was analyzed using a dynamic model, which is described here. The model includes the kinetics of the compressors and the heat switches, the heat transfer of the pre-coolers and the heat exchangers, the on/off ratio of the check valves, and the impedance of the J-T valve. The cooling power, the cycle time, and the operating conditions were obtained in terms of the power input, the heat sink temperature, and the J-T impedance

Dynamic design of gas sorption J-T refrigerator

Science.gov (United States)

Chan, C. K.

1986-01-01

A long-life Joule-Thomson refrigerator which is heat powered, involves no sealing, and has few mechanical parts is desirable for long-term sensor cooling in space. In the gas-sorption J-T refrigerator, cooling is achieved by gas sorption (either adsorption or absorption) processes. Currently, a modular, single-stage refrigerator is being designed and built to be operated at 20 K. The design was analyzed using a dynamic model, which is described here. The model includes the kinetics of the compressors and the heat switches, the heat transfer of the pre-coolers and the heat exchangers, the on/off ratio of the check valves, and the impedance of the J-T valve. The cooling power, the cycle time, and the operating conditions were obtained in terms of the power input, the heat sink temperature, and the J-T impedance.

Mary M Mader

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education. Mary M Mader. Articles written in Resonance – Journal of Science Education. Volume 2 Issue 1 January 1997 pp 53-59 General Article. Fostering Creativity in Students A Short Synthesis Project for the Organic Chemistry Laboratory · Mary M Mader Charles A ...

Present construction status and future plan of JT-60

Energy Technology Data Exchange (ETDEWEB)

Iso, Yasuhiko; Yoshikawa, Masaji [Japan Atomic Energy Research Inst., Tokai, Ibaraki. Tokai Research Establishment

1982-04-01

As for the critical plasma test facility JT-60, its detailed design was initiated in 1975, and the manufacture of the main body components was started in April, 1978, through the trial manufacture and development of important components. The manufacture of all the system equipment in factories is in progress. Especially, the essential components of main body have been almost completed, and ready to be installed in the building. The building is under construction, and a part of the equipment was brought in and installed since the beginning of 1982 fiscal year. JT-60 is composed of heating system, toroidal magnetic field coil power supply, poloidal magnetic field coil power supply, total control system, associated system for main body and various measuring equipment as well as the main body which consists of vacuum vessel, toroidal and poloidal magnetic field coils, base, primary cooling system, movable limiter and evacuating system. In this report, first the significance of JT-60 development and the outline of JT-60 are described, and the present construction status is reported. The specifications of the essential equipment of the main body and heating system and the measuring system configuration are listed in tables. The aims in JT-60 design are to make plasma generating pulse width longer, to obtain higher beta value in circular cross-section plasma, to install the magnetic limiter, and to realize compound second stage heating.

Accomplishment of JT-60U disassembly work dealing with radioactive components

International Nuclear Information System (INIS)

Ikeda, Yoshitaka

2015-01-01

The upgrade of the JT-60U to the superconducting tokamak 'JT-60SA' has been carried out to contribute the early realization of fusion energy by addressing key physics issues relevant for ITER and DEMO. Disassembly of the JT-60U tokamak was required so as to newly install the JT-60SA torus at the same position in the torus hall. The JT-60U tokamak was featured by the complicated and welded structure against the strong electromagnetic force, and by the radioactivation due to deuterium-deuterium (D-D) reactions of 1.5x10"2"0 (n) in total. Since this work was the first experience of disassembling a large radioactivated fusion device in Japan, careful preparations of disassembly activities, including treatment of the radioactivated materials and safety work, have been made. About 13,000 components with a total weight of more than 5,400 tonnes were removed from the torus hall and stored safely in storage facilities. All disassembly components were stored with recording the data such as dose rate, weight and kind of material, so as to apply the clearance level regulation in future. It was confirmed that the main radioactive material of the disassembly components was the stainless steel and that its dose rate was almost background level (∼0.1 μSv/h) at ∼10 m far from the vacuum vessel. It seems that the disassembly components with background dose level are in the clearance level. The assembly of JT-60SA tokamak has started in January 2013 after this disassembly of the JT-60U tokamak. (author)

Structure design of the central solenoid in JT-60SA

International Nuclear Information System (INIS)

Asakawa, Shuji; Tsuchiya, Katsuhiko; Kuramochi, Masaya; Yoshida, Kiyoshi

2009-09-01

The upgrade of JT-60U magnet system to superconducting coils (JT-60SA: JT-60 Super Advanced) has been decided by parties of Japanese government (JA) and European commission (EU) in the framework of the Broader Approach (BA) agreement. The magnet system for JT-60SA consists of a central solenoid (CS), equilibrium field(EF) coils, toroidal field(TF) coils. The central solenoid consists the four winding pack modules. In order to counteract the thermal contraction as well as the electric magnetic repulsion and attraction together with other forces generated in each module, it is necessary to apply pre-loading to the support structure of the solenoid and to pursue a structure which is capable of sustaining such loading. In the present report, the structural design of the supporting structure of the solenoid and the jackets of the modules is verified analytically, and the results indicate that the structural design satisfies the 'Codes for Fusion Facilities - Rules on Superconducting Magnet Structure -'. (author)

Vacuum leak test technique of JT-60

International Nuclear Information System (INIS)

Kaminaga, Atsushi; Arai, Takashi; Kodama, Kozo; Sasaki, Noboru; Saidoh, Masahiro

1998-01-01

Since a vacuum vessel of JT-60 is very large (167 m 3 ) and is combined with many components, such as magnetic coils, neutral beam injection systems and RF heating systems, etc., the position of leak testing exceeds 700. The two kind of techniques for vacuum leak test used in JT-60 has been described. Firstly the probe helium gas can be fed remotely in the three-dimensionally sectioned 54 regions of the JT-60 torus. The leak test was very rapidly performed by using this method. Secondly the helium detector system has been modified by the additional installation of the cryopump, which reduced the background level of the deuterium gas. The sensitivity of vacuum leak test with the cryopump was two orders of magnitude larger than that of without it. The examples of the performed vacuum leak test are stated. The vacuum leaks during experiments were 9 times. They were caused by thermal strain and plasma discharge. The vacuum leaks just after maintenance are 36 times which mainly caused by mis-installation. (author)

Maximum β limited by ideal MHD ballooning instabilites in JT-60

International Nuclear Information System (INIS)

Seki, Shogo; Azumi, Masashi

1986-03-01

Maximum β limited by ideal MHD ballooning instabilities is investigated on divertor configurations in JT-60. Maximum β against ballooning modes in JT-60 has strong dependecy on the distribution of the safety factor over the magnetic surfaces. Maximum β is ∼ 2 % for q 0 = 1.0, while more than 3 % for q 0 = 1.5. These results suggest that the profile control of the safety factor, especially on the magnetic axis, is attractive to the higher β operation in JT-60. (author)

Recent results of JT-60U ICRF antenna operation

International Nuclear Information System (INIS)

Fujii, T.; Saigusa, M.; Kimura, H.

1994-01-01

Ion cyclotron range of frequencies (ICRF) heating is one of attractive plasma heating methods for reactor grade tokamaks, because it is quite effective in the wide ranges of plasma density and temperature. An antenna which should inject high power into plasma has been developed intensively because the heating efficiency and the coupling properties depend on its design. The antenna was operated at a small antenna-plasma gap in the JT-60 in out of phase mode, which showed the high heating efficiency to obtain high loading resistance, and similarly to other tokamaks. However, in order to reduce heat load to the antenna from plasma, a wide gap is required in reactor grade tokamaks such as ITER, in which the gap is designed to be 0.15 m in CDA. Two new antennas were fabricated for the JT-60U, which were designed to obtain high loading resistance at a wide gap for (π,0) phasing. The JT-60U ICRF heating system is explained. Also the JT-60U antenna is described. Antenna conditioning has been conducted well in the initial operation period. The phasing mode was set at (π,0) phasing, in which high heating efficiency is expected. The procedure is explained. The coupling and radiation loss properties during ICRF heating are reported. The JT-60U ICRF antennas were conditioned quickly with about 70 shots. The maximum coupled power was 6.4 MW for (π,0) phasing, and the power density was 6.1 MW/m 2 . (K.I.)

Performance verification tests of JT-60SA CS model coil

Energy Technology Data Exchange (ETDEWEB)

Obana, Tetsuhiro, E-mail: obana.tetsuhiro@LHD.nifs.ac.jp [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Murakami, Haruyuki [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Takahata, Kazuya; Hamaguchi, Shinji; Chikaraishi, Hirotaka; Mito, Toshiyuki; Imagawa, Shinsaku [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Kizu, Kaname; Natsume, Kyohei; Yoshida, Kiyoshi [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

2015-11-15

Highlights: • The performance of the JT-60SA CS model coil was verified. • The CS model coil comprised a quad-pancake wound with a Nb{sub 3}Sn CIC conductor. • The CS model coil met the design requirements. - Abstract: As a final check of the coil manufacturing method of the JT-60 Super Advanced (JT-60SA) central solenoid (CS), we verified the performance of a CS model coil. The model coil comprised a quad-pancake wound with a Nb{sub 3}Sn cable-in-conduit conductor. Measurements of the critical current, joint resistance, pressure drop, and magnetic field were conducted in the verification tests. In the critical-current measurement, the critical current of the model coil coincided with the estimation derived from a strain of −0.62% for the Nb{sub 3}Sn strands. As a result, critical-current degradation caused by the coil manufacturing process was not observed. The results of the performance verification tests indicate that the model coil met the design requirements. Consequently, the manufacturing process of the JT-60SA CS was established.

Development of the pellet injector for JT-60

International Nuclear Information System (INIS)

Kawasaki, Kouzo; Hiratsuka, Hajimo; Takatsu, Hideyuki; Shimizu, Masatsugu; Onozuka, Masanori; Uchikawa, Takashi; Iwamoto, Syuichi; Hashiri, Nobuo

1989-01-01

The pneumatic 4-shot pellet injector has been installed and operated for JT-60 (JAERI Tokamak-60). The performance tests have proved that the device provides high speed hydrogen pellets just as planned. The maximum pellet velocity obtained in the hydrogen pellet tests is greater than 1.6 km/sec at 50 bar propellant gas. The device is now in use for JT-60 contributing to plasma study. In this paper the outline of features and performance of the device is presented. (author). 4 refs.; 8 figs

Overview of engineering design, manufacturing and assembly of JT-60SA machine

Energy Technology Data Exchange (ETDEWEB)

Di Pietro, Enrico, E-mail: enrico.dipietro@jt60sa.org [JT-60SA EU Home Team, Fusion for Energy, Boltzmannstrasse 2, Garching 85748 (Germany); Barabaschi, Pietro [JT-60SA EU Home Team, Fusion for Energy, Boltzmannstrasse 2, Garching 85748 (Germany); Kamada, Yutaka [JT-60SA JA Home Team, Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Ishida, Shinichi [JT-60SA JA Project Team, Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

2014-10-15

The JT-60SA experiment is one of the three projects to be undertaken in Japan as part of the Broader Approach Agreement, conducted jointly by Europe and Japan, and complementing the construction of ITER in Europe. The JT-60SA device is a fully superconducting tokamak capable of confining break-even equivalent deuterium plasmas with equilibria covering high plasma shaping with a low aspect ratio at a maximum plasma current of I{sub p} = 5.5 MA. This makes JT-60SA capable to support and complement ITER in all the major areas of fusion plasma development necessary to decide DEMO reactor construction. After a complex start-up phase due to the necessity to carry out a re-baselining effort with the purpose to fit in the original budget while aiming to retain the machine mission, performance, and experimental flexibility, in 2009 detailed design could start. With the majority of time-critical industrial contracts in place, in 2012, it was possible to establish a credible time plan, and now, the project is progressing on schedule towards the first plasma in March 2019. After careful and focused R and D and qualification tests, the procurement of the major components and plant is now well advanced in manufacturing design and/or fabrication. In the meantime the disassembly of the JT-60U machine has been completed and the engineering of the JT-60SA assembly process has been developed. The actual assembly of JT-60SA started in January 2013 with the installation of the cryostat base. The paper gives an overview of the present status of the engineering design, manufacturing and assembly of the JT-60SA machine.

Progress in JT-60 joint research

International Nuclear Information System (INIS)

Kimura, Haruyuki; Kikuchi, Mitsuru; Inutake, Masaaki

2007-01-01

It consists of five chapters; 1) introduction, 2) management system of joint plan and researches, 3) progress of joint researches, 4) results of researches and 5) summary. The second chapter stated the structure of management system of JT-60 joint researches, progress of management of the JT-60 experimental theme system, invitation the public to joint researches and selection of the subjects. The progress of joint researches contained the number of subjects, research members and organizations, change of joint research fields, remote control system of experiments, analysis code group, and number of reports. The main results of researches such as development of operation without center solenoid, Magneto-Hydro-Dynamics (MHD) control by electron cyclotron wave, plasma-wall interaction, application of laser technologies to plasma measurement, and comparison between tokamak and helical are reported. (S.Y.)

Prototype ion source for JT-60 neutral beam injectors

International Nuclear Information System (INIS)

Akiba, M.

1981-01-01

A prototype ion source for JT-60 neutral beam injectors has been fabricated and tested. Here, we review the construction of the prototype ion source and report the experimental results about the source characteristics that has been obtained at this time. The prototype ion source is now installed at the prototype unit of JT-60 neutral beam injection units and the demonstration of the performances of the ion source and the prototype unit has just started

JT-60SA power supply system

International Nuclear Information System (INIS)

Coletti, A.; Baulaigue, O.; Cara, P.; Coletti, R.; Ferro, A.; Gaio, E.; Matsukawa, M.; Novello, L.; Santinelli, M.; Shimada, K.; Starace, F.; Terakado, T.; Yamauchi, K.

2011-01-01

The paper describes the main features of the Superconducting Magnets Power Supply to generate the toroidal and poloidal magnetic fields in JT-60SA tokamak, with special regard to coil current regulation mode and magnets protection.

J.T. van der Kemp and Eighteenth century coded subjectivity | Smit ...

African Journals Online (AJOL)

It then proceeds to an analysis of the impact of J.T. van der Kemp, 1799-1804. Theoretically I draw on the distinction between morality and ethics by Michel Foucault as well as his theorising of eighteenth century representational thought. Keywords: J.T. van der Kemp, morality, ethics, models for missionary engagement, ...

Design of distributed JT (Joule-Thomson) effect heat exchanger for superfluid 2 K cooling device

Science.gov (United States)

Jeong, S.; Park, C.; Kim, K.

2018-03-01

Superfluid at 2 K or below is readily obtained from liquid helium at 4.2 K by reducing its vapour pressure. For better cooling performance, however, the cold energy of vaporized helium at 2 K chamber can be effectively utilized in a recuperator which is specially designed in this paper for accomplishing so-called the distributed Joule-Thomson (JT) expansion effect. This paper describes the design methodology of distributed JT effect heat exchanger for 2 K JT cooling device. The newly developed heat exchanger allows continuous significant pressure drop at high-pressure part of the recuperative heat exchanger by using a capillary tube. Being different from conventional recuperative heat exchangers, the efficient JT effect HX must consider the pressure drop effect as well as the heat transfer characteristic. The heat exchanger for the distributed JT effect actively utilizes continuous pressure loss at the hot stream of the heat exchanger by using an OD of 0.64 mm and an ID of 0.4 mm capillary tube. The analysis is performed by dividing the heat exchanger into the multiple sub-units of the heat exchange part and JT valve. For more accurate estimation of the pressure drop of spirally wound capillary tube, preliminary experiments are carried out to investigate the friction factor at high Reynolds number. By using the developed pressure drop correlation and the heat transfer correlation, the specification of the heat exchanger with distributed JT effect for 2 K JT refrigerator is determined.

Marie Curie: Physicist and Woman

Science.gov (United States)

Howes, Ruth

Marie Sklodowska was born in Warsaw on November 7, 1867. Girls were not allowed to attend college in Poland, so Marie found a well-paying post as a governess in rural village which she held for three years while helping her older sister complete medical school in Paris. Then Marie moved to Paris and graduated first in her class at the Sorbonne with a master's degree in physics in 1893. In 1895, she married the talented young physicist, Pierre Curie. Marie decided to investigate the radioactive components of the mineral pitchblende for her dissertation. The work involved chemical analysis of a ton of material in an unheated shed. Pierre joined her and at the end of 1898, the Curies announced the discovery of radium and polonium. Through 1899, Marie labored to measure the atomic weight of radium. In 1903, Marie earned her doctorate, the first for a woman in France, and the Curies split the Nobel Prize in Physics with Henri Becquerel. They became widely known, besieged by the press and frequently invited to make presentations and be awarded honors. They hated fame and both suffered bad health. In April, 1906, Pierre Curie was struck by a wagon and killed instantly. Marie was left as a single mother with two young daughters. Fortunately, the Sorbonne hired her to fill Pierre's position. In 1911, she was rejected for membership in the French Academy of Science because she was a woman. Also in 1911, she was accused of having an affair with a married French physicist Paul Langevin. The resulting scandal hit the press and brought angry mobs to her home. In the middle of this hullaballoo, she was informed that she had won a second Nobel Prize, this time in Chemistry. When World War I broke out, Marie mounted x-ray units on cars and became a heroine. She visited the United States in 1921 where President Harding presented her with a gram of radium. She continued her scientific studies in spite of declining health until her death in 1934. Professor Emerita.

FIR-laser scattering for JT-60

International Nuclear Information System (INIS)

Itagaki, Tokiyoshi; Matoba, Tohru; Funahashi, Akimasa; Suzuki, Yasuo

1977-09-01

An ion Thomson scattering method with far infrared (FIR) laser has been studied for measuring the ion temperature in large tokamak JT-60 to be completed in 1981. Ion Thomson scattering has the advantage of measuring spatial variation of the ion temperature. The ion Thomson scattering in medium tokamak (PLT) and future large tokamak (JET) requires a FIR laser of several megawatts. Research and development of FIR high power pulse lasers with power up to 0.6 MW have proceeded in ion Thomson scattering for future high-temperature tokamaks. The FIR laser power will reach to the desired several megawatts in a few years, so JAERI plans to measure the ion temperature in JT-60 by ion Thomson scattering. A noise source of the ion Thomson scattering with 496 μm-CH 3 F laser is synchrotron radiation of which the power is similar to NEP of the Schottky-barrier diode. However, the synchrotron radiation power is one order smaller than that when a FIR laser is 385 μm-D 2 O laser. The FIR laser power corresponding to a signal to noise ratio of 1 is about 4 MW for CH 3 F laser, and 0.4 MW for D 2 O laser if NEP of the heterodyne mixer is one order less. A FIR laser scattering system for JT-60 should be realized with improvement of FIR laser power, NEP of heterodyne mixer and reduction of synchrotron radiation. (auth.)

Mary and femininity: A psychological critique.

Science.gov (United States)

Harrington, P A

1984-09-01

This essay uses Freud to interpret the symbolism and theology of Mary in modern Catholicism. In her role as the mother of believers, Mary functions to place the Christian in the position of a child who receives illusory gratification from the mother. In her role as model for Christians to emulate, Mary functions to place the Christian in the position of receptivity and dependence which Freud associated with femininity. Reinterpreting Freud from a feminist perspective, I suggest that the kind of femininity Mary represents serves to perpetuate patriachal social structures and to inhibit full psychological maturity.

Studies on first wall and plasma wall interaction in JT-60

International Nuclear Information System (INIS)

Nakamura, Hiroo

1988-12-01

This paper describes studies on first wall and plasma wall interaction in JT-60. Main results are as follows; (1) To select JT-60 first wall material, various RandD were done in FY1975 ∼ 1976. Mo was selected as first wall materials of limiters and divertor plates because of its reliability under a high heat flux condition. (2) Development of low-Z material has been done to reduce impurity problem of Mo first wall. As a result, titanium carbide (TiC) was selected as a coating material on the Mo. High heat load testing has been done for TiC coated Mo limiter same as JT-60. This material can survive under the condition of 1 kW/cm 2 x 10 s, expected in JT-60 limiter design. (3) To reduce high heat load on the divertor plate, separatrix swing is proposed. Optimum frequency of the sweeping is evaluated to be 2 Hz in JT-60. For a discharge with heating power of 30 MW and duration time of 10 s, in addition to the separatrix swing, remote radiative cooling in the divertor region is necessary. Moreover, calculations of erosion thickness have been done for stainless steel, Mo, graphite, TiC and silicon caibide under high heat flux during plasma disruption. (4) In divertor experiments in JT-60, divertor functions on particle, heat load and impurity controls have been demonstrated. In elctron density of 6 x 10 19 m -3 , particle fueling rate of 20 MW NB heating (3 Pa m 3 /s) can be exhausted by divertor pumping system. Effectiveness of remote radiative cooling is demonstrated under the condition of 20 MW NB heating power. Also, separatrix swing is demonstrated to reduce heat load on the divertor plate. Total radiation in main plasma is 5 ∼ 10% of total absorbed power. (author) 120 refs

Recent developments in the JT-60 data processing system

International Nuclear Information System (INIS)

Matsuda, T.; Saitoh, N.; Tsugita, T.; Oshima, T.; Sakata, S.; Sato, M.; Koiwa, M.; Watanabe, K.

1999-01-01

The JT-60 data processing system was originally a large computer complex system including a lot of micro-computers, several mini-computers, and a mainframe computer. Recently, several improvements have been made to the original system to modernize the system. Many sub-systems composed of aged mini-computers have been replaced with workstations by utilizing recent progress in computer and network technologies. The system can handle ∝300 MB of raw data per discharge, which is three times larger than the amount in the original system. These improvements have been applied to develop element technologies necessary to the remote participation in JT-60 experiments. A remote diagnostics control and monitoring system and a computer system for access to JT-60 data from the Internet are used together with video conferencing systems for a real-time communication. In 1996, the remote participation based on them was successfully demonstrated in collaboration with Japan Atomic Energy Research Institute, Los Alamos National Laboratory, and Princeton Plasma Physics Laboratory. (orig.)

Study of grounding system of large tokamak device JT-60

International Nuclear Information System (INIS)

Arakawa, Kiyotsugu; Shimada, Ryuichi; Kishimoto, Hiroshi; Yabuno, Kohei; Ishigaki, Yukio.

1982-01-01

In the critical plasma testing facility JT-60 constructed by the Japan Atomic Energy Research Institute, high voltage, large current is required in an instant. Accordingly, for the protection of human bodies and the equipment, and for realizing the stable operation of the complex, precise control and measurement system, a large scale facility of grounding system is required. In case of the JT-60 experimental facility, the equipments with different functions in separate buildings are connected, therefore, it is an important point to avoid high potential difference between buildings. In the grounding system for the JT-60, a reticulate grounding electrode is laid for each building, and these electrodes are connected with a low impedance metallic duct called grounding trunk line. The power supply cables for various magnetic field coils, control lines and measurement lines are laid in the duct. It is a large problem to grasp quantitatively the effect of a grounding trunk line by analysis. The authors analyzed the phenomenon that large current flows into a grounding system by lightning strike or grounding. The fundamental construction of the grounding system for the JT-60, the condition for the analysis and the result of simulation are reported. (Kako, I.)

Pollution reduction technology program for class T4(JT8D) engines

Science.gov (United States)

Roberts, R.; Fiorentino, A. J.; Diehl, L. A.

1977-01-01

The technology required to develop commercial gas turbine engines with reduced exhaust emissions was demonstrated. Can-annular combustor systems for the JT8D engine family (EPA class T4) were investigated. The JT8D turbofan engine is an axial-flow, dual-spool, moderate-bypass-ratio design. It has a two-stage fan, a four-stage low-pressure compressor driven by a three-stage low-pressure turbine, and a seven-stage high-pressure compressor driven by a single-stage high-pressure turbine. A cross section of the JT8D-17 showing the mechanical configuration is given. Key specifications for this engine are listed.

Marie Curie: scientific entrepreneur

International Nuclear Information System (INIS)

Boudia, S.

1998-01-01

Marie Curie is best known for her discovery of radium one hundred years ago this month, but she also worked closely with industry in developing methods to make and monitor radioactive material, as Soraya Boudia explains. One hundred years ago this month, on 28 December 1898, Pierre Curie, Marie Sklodowska-Curie and Gustave Bemont published a paper in Comptes-rendus - the journal of the French Academy of Sciences. In the paper they announced that they had discovered a new element with astonishing properties: radium. But for one of the authors, Marie Curie, the paper was more than just the result of outstanding work: it showed that a woman could succeed in what was then very much a male-dominated scientific world. Having arrived in Paris from Poland in 1891, Marie Curie became the first woman in France to obtain a PhD in physics, the first woman to win a Nobel prize and the first woman to teach at the Sorbonne. She also helped to found a new scientific discipline: the study of radioactivity. She became an icon and a role-model for other women to follow, someone who succeeded - despite many difficulties - in imposing herself on the world of science. Although Curie's life story is a familiar and well documented one, there is one side to her that is less well known: her interaction with industry. As well as training many nuclear physicists and radiochemists in her laboratory, she also became a scientific pioneer in industrial collaboration. In this article the author describes this side of Marie Curie. (UK)

Jean-Marie Dufour 1937-2007

CERN Multimedia

2007-01-01

Jean-Marie Dufour, who was head of the CERN Legal Service from 1974 until his retirement in 2001, passed away on 8 July. Following his arrival at CERN in 1966 during the crucial phase of expansion of the Laboratory’s site, Jean-Marie Dufour ensured that CERN’s rules were applied while taking part in essential stages of the Organization’s development. With his fine mind and erudition, Jean-Marie Dufour, a staunch European devoted to the CERN cause, has left his mark on the Legal Service. The Service will publish a tribute to him in a forthcoming issue of the Bulletin.

Conceptual design of JT-60SA cryostat

International Nuclear Information System (INIS)

Shibama, Y.K.; Sakurai, S.; Masaki, K.; Sukekawa, A.M.; Kaminaga, A.; Yoshida, K.; Matsukawa, M.

2007-01-01

JT-60U modification program to fully superconducting device has been proceeded, namely ''JT-60SA'', toward early realization of fusion energy based on tokamak concept. The design of JT-60SA cryostat is expected to achieve a vacuum thermal insulation for super conducting coils, a bio-shielding boundary and structural gravity support. The cryostat is required to cover JT-60SA tokamak device, which is 15 m of total height and 7 m of radius, but there is geometrical limit due to surrounding devices reutilized. Although the cryostat consists of vessel body and gravity support, and the structural material is low cobalt 304 stainless steel (Co: 2 , and the design of the leaf spring is considered to reduce thermal stress, and to withstand the mechanical loads of plasma disruption and seismic loads. The coolant is 80 K gas helium and both sides of panel are covered with multi-layers super insulation (SI) to reduce heat load (radiation) up to 1/100. Fraction of non-covered region is assumed to be 2% due to many port-joints and supports for the vacuum vessel. Total heat load for inner surface of cryostat (600 m 2 ) is 9kW and the heat load for the port-joints (-300 m 2 ) is assumed up to 9 kW. The operational pressure of the cryostat is required to keep less than 10 -2 Pa and about 100,000 m 2 of structural surfaces is considered for exhaust system specification. Another role of the cryostat is the radiation protection. Biological shielding up to 10 micro-Sv/h (for maintenance acceptance) is required of the cryostat surface after the 10 years operation. Thus the cryostat consists of boron (2 wt%) doped concrete of 220 mm thickness and structural SS304 of total 40 mm thickness. The concrete reduces the air activation (41Ar) in the torus hall by 90% rather than the normal one by the thermal neutron absorption of boron. (orig.)

QT and JT dispersion and cardiac performance in children with neonatal Bartter syndrome: a pilot study.

Science.gov (United States)

Hacihamdioglu, Duygu Ovunc; Fidanci, Kursat; Kilic, Ayhan; Gok, Faysal; Topaloglu, Rezan

2013-10-01

QT dispersion and JT dispersion are simple noninvasive arrhythmogenic markers that can be used to assess the homogeneity of cardiac repolarization. The aim of this study was to assess QT and JT dispersion and their relation with left ventricular systolic and diastolic functions in children with Bartter syndrome (BS). Nine neonatal patients with BS (median age 9.7 years) and 20 controls (median age 8 years) were investigated at rest. Both study and control subjects underwent electrocardiography (ECG) in which the interval between two R waves and QT intervals, corrected QT, QT dispersion, corrected QT dispersion, JT, corrected JT, JT dispersion and corrected JT dispersion were measured with 12-lead ECG. Two-dimensional, Doppler echocardiographic examinations were performed. Patients and controls did not differ for gender and for serum levels of potassium, magnesium, and calcium (p > 0.05). Both study and control subjects had normal echocardiographic examination and baseline myocardial performance indexes. The QT dispersion and JT dispersion were significantly prolonged in patients with BS compared to those of the controls {37.5 ms [interquartile range (IQR) 32.5-40] vs. 25.5 ms (IQR 20-30), respectively, p = 0.014 and 37.5 ms (IQR 27.5-40) vs. 22.5 ms (IQR 20-30), respectively, p = 0.003}. Elevated QT and JT dispersion during asymptomatic and normokalemic periods may be risk factors for the development of cardiac complications and arrhythmias in children with BS. In these patients the need for systematic cardiac screening and management protocol is extremely important for effective prevention.

Design of the movable limiters for JT-60

International Nuclear Information System (INIS)

Takashima, Tetsuo; Yamamoto, Masahiro; Nakamura, Hiroo; Ohkubo, Minoru; Ohta, Mitsuru

1976-07-01

Two fast-acting movable rail limiters will be used in JT-60 to suppress skin effect of the plasma current with a large radius. They travel safely through a stroke of about 1 m for 0.1 sec in the build-up phase of plasma current. The movable limiter system consists of a driving mechanism, a vacuum seal, a bearing used at high temperatures in a vacuum, a molybdenum rail limiter weighing 200 kg and its auxiliary members. Many problems are involved in construction of the system because the design specifications exceed the present technology. Described are design of the movable limiter system for JT-60 and problems in the mechanical, electrical and vacuum aspects. (auth.)

Development of upgraded pellet injector for JT-60

International Nuclear Information System (INIS)

Onozuka, M.; Shimomura, T.; Tanaka, N.; Iwamoto, S.; Hashiri, N.; Oda, Y.; Minami, M.; Hiratsuka, H.; Kawasaki, K.; Takatsu, H.; Shimizu, M.

1989-01-01

The pneumatic 4-shot pellet injector had been in use for JT-60 (JAERI Tokamak-60) contributing to plasma studies in 1988. It could propel the pellets up to 1.6 km/sec at 50 bar propellant gas. In 1989, the new gun assembly has been reinstalled in the upgraded system to provide higher performance and reliability. The supply pressure of the propellant gas is to be raised to 100 bar to obtain higher pellet velocity up to 2.3 km/sec. The device is now in use for JT-60, and is expected to contribute to further plasma studies. In this paper the outline of features and performance of the device is presented. 5 refs., 9 figs

Robotic Software Integration Using MARIE

Directory of Open Access Journals (Sweden)

Carle Côté

2006-03-01

Full Text Available This paper presents MARIE, a middleware framework oriented towards developing and integrating new and existing software for robotic systems. By using a generic communication framework, MARIE aims to create a flexible distributed component system that allows robotics developers to share software programs and algorithms, and design prototypes rapidly based on their own integration needs. The use of MARIE is illustrated with the design of a socially interactive autonomous mobile robot platform capable of map building, localization, navigation, tasks scheduling, sound source localization, tracking and separation, speech recognition and generation, visual tracking, message reading and graphical interaction using a touch screen interface.

Waveguide circuit for LHRF heating in 'JT-60'

International Nuclear Information System (INIS)

Uehara, Kazuya; Saegusa, Mikio; Mizuno, Takenori; Sano, Keigo; Hara, Mitsuru; Oishi, Isamu; Kanai, Takao.

1985-01-01

As the heating method for attaining the critical condition in the critical plasma experiment apparatus 'JT-60' in the Japan Atomic Energy Research Institute, in addition to Joule heating, as the second heating method, neutral beam injection heating and high frequency heating have been adopted. For this high frequency heating, several tens to 200 MHz band of ICRF heating, several hundreds MHz to several GHz band of LHRF heating and several tens to 200 GHz band of ECR heating were considered, and in the JT-60, 100 MHz band (ICRF) and 2 GHz band (LHRF) have been adopted. Furukawa Electric Co., Ltd. has engaged in the development and manufacture of the waveguides of transmission system used for this high frequency heating through NEC Corp. This high frequency heating is to heat plasma by injecting high frequency radio waves into plasma proper, and reaches 10 MW for the whole high frequency heating. The system efficiently transmitting the radio waves of large power from a Klystron as a high frequency source to the JT-60 is the transmission system. The outline of the waveguides of the 2 GHz band transmission system and the individual performance of respective waveguides are reported. (Kako, I.)

Mary Shelley: Teaching and Learning through "Frankenstein"

Science.gov (United States)

Girard, Theresa M.

2009-01-01

In the writing of "Frankenstein", Mary Shelley was able to change the course of women's learning, forever. Her life started from an elite standpoint as the child of Mary Wollstonecraft and William Godwin. As such, she was destined to grow to be a major influence in the world. Mary Shelley's formative years were spent with her father and his many…

"Mary Hartman, Mary Hartman": An Analysis of Satire as a Violation of Soap Opera Stereotypes.

Science.gov (United States)

Gaulard, Joan M.

The soap opera "Mary Hartman, Mary Hartman" presents an interesting new genre in television, as it defies the conventional standards and stereotypes associated with daytime drama. The central character is not a dependent victim but a survivor who indicates to her viewers the concept which advertisers and media management have of them. A…

"Mary Hartman, Mary Hartman"; A New Genre of Prosocial Programming, or Just Another Soap Opera?

Science.gov (United States)

Surlin, Stuart H.; Maloof, Mary C.

This paper discusses the wide appeal, and the effect on the viewing audience, of traditional television soap operas. It reports on a comparison of role interactions, topics discussed by the characters, and types of topics and problems presented on the television program "Mary Hartman, Mary Hartman" with those presented on two traditional…

2. Interferometry and polarimetry. 2.3. Polarimetry on JT-60U

International Nuclear Information System (INIS)

Kawano, Yasunori

2000-01-01

In order to establish an electron density measurement method with high reliability and stability for magnetic-confinement fusion devices, studies on infrared polarimetry have been carried out in JT-60U. Electron density measurement based on tangential Faraday rotation has been verified using a CO 2 laser polarimeter developed for JT-60U. In this article, basic ideas of studies, results from polarimetry experiments, and suggestions for future devices are presented. (author)

The design study of the JT-60SU device. No. 3. The superconductor-coils of JT-60SU

International Nuclear Information System (INIS)

Ushigusa, Kenkichi; Mori, Katsuharu; Nakagawa, Syouji

1997-03-01

The superconducting coil systems and the cryogenic system for the JT-60 Super Upgrade (JT-60SU) has been designed. Both Nb 3 Al and NbTi as a superconducting wire material are employed in the toroidal coils (D-shaped 18 coils) to realize a high field magnet with a low cost. Significant reduction of the coil weight (150 tons/coil) without losing the coil rigidity has been achieved by connecting two toroidal coils with shear panels. Validity of this design is confirmed by the detailed structural analysis and thermohydraulic analysis. The poloidal coil system consists of 4 central solenoid coils with (NbTi) 3 Sn and 6 outer equilibrium field coils with NbTi. This system has an enough capability to supply the flux of 170Vs to produce a 10MA discharge with 200s of flat-top and to make various plasma configurations. The construction procedure of the poloidal coil system is also established under the constraint of the JT-60 site. Two sets of race-track shaped superconducting coils mounted on the top of the machine is designed to compensate the error field inside the vessel by supplying helical (m=2/n=1) magnetic field. By using cryogenic system with a 36kW of cooling capacity, the total cold weight of around 4000tons can be cooled down to 4.5K within one month, and steady heat load of 6.5kW and transient heat load of 9.0MJ can be removed within 30 minutes of discharge repetition rate. (author)

Sõda ilma sentimentaalsuseta / Mari Laaniste

Index Scriptorium Estoniae

Laaniste, Mari, 1977-

2006-01-01

10-osaline sõjaseriaal "Relvavennad" ("Band of Brothers") ajalooprofessor Stephen Ambrose'i raamatu järgi : produtsendid Tom Hanks, Steven Spielberg : režissöörid Tom Hanks, David Frenkel jt. : Ameerika Ühendriigid - Suurbritannia 2001

Review of JT-60U experimental results in 1997

International Nuclear Information System (INIS)

Adachi, H.; Akasaka, H.; Akino, N.

1998-08-01

The JT-60U experiments in 1997 focused mainly on the steady-state tokamak research with the newly installed W-shaped pumped divertor and the negative ion based neutral beam (NNB) in addition to the existing profile and shape control techniques developed in JT-60U. In particular, the research on divertor physics was accelerated under the new divertor system with many of fine diagnostics: Detachment characteristics, pumping control, impurity control, recycling characteristics, etc. in the W-shaped divertor were investigated in detail. The main purpose of confinement and stability studies in 1997 was to improve steadiness of high confinement plasmas with the new divertor. Researches progressed also for the formation conditions of the internal and the surface transport barriers in the high-β p mode, the reversed shear mode and the H-mode. Toward the advanced feedback controls of multiple parameters, the JT-60U started new feedback controls of central line density and divertor neutral gas pressure in addition to the existing controls of off-axis line density, radiation power and neutron production rate. The JT-60U team also carefully studied characteristics of halo current during disruptions. Optimization of NNB operation progressed steadily and injection power increased up to 4.2MW. The NNB-driven current was identified directly from the internal magnetic measurement and driven current profile was confirmed to be consistent with the ACCOME calculation. The current profile control with LHCD successfully sustained the internal transport barrier in reversed shear plasmas. Continuous TAE modes were observed with NNB for the first time as beam-driven TAE modes. (J.P.N.)

Review of JT-60U experimental results in 1997

Energy Technology Data Exchange (ETDEWEB)

Adachi, H.; Akasaka, H.; Akino, N. [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment] [and others

1998-08-01

The JT-60U experiments in 1997 focused mainly on the steady-state tokamak research with the newly installed W-shaped pumped divertor and the negative ion based neutral beam (NNB) in addition to the existing profile and shape control techniques developed in JT-60U. In particular, the research on divertor physics was accelerated under the new divertor system with many of fine diagnostics: Detachment characteristics, pumping control, impurity control, recycling characteristics, etc. in the W-shaped divertor were investigated in detail. The main purpose of confinement and stability studies in 1997 was to improve steadiness of high confinement plasmas with the new divertor. Researches progressed also for the formation conditions of the internal and the surface transport barriers in the high-{beta}{sub p} mode, the reversed shear mode and the H-mode. Toward the advanced feedback controls of multiple parameters, the JT-60U started new feedback controls of central line density and divertor neutral gas pressure in addition to the existing controls of off-axis line density, radiation power and neutron production rate. The JT-60U team also carefully studied characteristics of halo current during disruptions. Optimization of NNB operation progressed steadily and injection power increased up to 4.2MW. The NNB-driven current was identified directly from the internal magnetic measurement and driven current profile was confirmed to be consistent with the ACCOME calculation. The current profile control with LHCD successfully sustained the internal transport barrier in reversed shear plasmas. Continuous TAE modes were observed with NNB for the first time as beam-driven TAE modes. (J.P.N.)

Present status of the JT-60 control system

International Nuclear Information System (INIS)

Kimura, T.

1992-01-01

The present status of the control system for a large fusion device of the JT-60 upgrade tokamak is reported including its original design concept, the progress of the system in the past five-year operation and modification for the upgrade. The control system has the features of hierarchical structure, computer control, adoption of CAMAC interfaces and protective interlock by both software and hard-wired systems. Plant monitoring and control are performed by an efficient data communication via CAMAC highways. Sequential discharge control of is executed by a combination of computers and a timing system. A plasma feedback control system with fast 32-bit microprocessors and a man/machine interface with modern workstations have been newly developed for the operation of the JT-60 upgrade. (author)

Development of multilayer piezoelectric actuator valve for JT-60

International Nuclear Information System (INIS)

Miyo, Yasuhiko; Hiratsuka, Hajime; Masui, Hiroshi; Hosogane, Nobuyuki; Miya, Naoyuki

2001-11-01

In order to improve the gas injection valve used for the operation of JT-60, a new type of valve (multilayer piezoelectric actuator valve) was developed. The conventional valve (bimorph piezoelectric valve) has been used for 15 years since the beginning of experimental operation in April, 1985. However, it came to be hard to keep the performance of the valve because of the deterioration of the driving source, i.e. piezoelectric element. Developments of the new valve were carried out based on experiences through experimental operations in JT-60. Requirements for the design are: (1) to be hard structure for making a sheet leak, (2) to allow a repair work at atmosphere side without an air vent of the vacuum vessel, (3) to be more smaller and lighter compared with the conventional one, and (4) to have a high maintenance efficiency by utilizing of the commercial piezoelectric elements and power supplies. The newly developed valve was examined with various tests such as gas flow characteristic test, high magnetic field proof test, high temperature proof test and gas flow rate test for aged deterioration. Results, confirm that the performance of the valve is applicable for JT-60 operations. (author)

Marie and Pierre Curie. Life in extremes; Marie and Pierre Curie. Leben in Extremen

Energy Technology Data Exchange (ETDEWEB)

Roethlein, Brigitte

2008-07-01

In Paris in 1894, two young physicists fall in love: Marie Sklodowska and Pierre Curie. They get married and make great contributions to science, research radioactivity and discover new chemical elements. The marriage of Marie and Pierre Curie is quite modern: They work together as equals, share their thoughts and pursue their plans together as partners. They share an absolute interest in science, a love of nature, and a sceptic attitude towards the sophisticated society of the Belle Epoque. They are together 24 hours a day with hardly ever any disagreement. Whenever one of them is ill - which is quite often because of the high level of radioactivity in their laboratory -, the other will nurse him or her. After only twelve years of mutual love, Pierre Curie dies. Marie raises their two daughters on her own and continues her research. In 1911, she will be the first scientist that ever gets a second Nobel Prize. (orig.) [German] Im Paris des Jahres 1894 verlieben sich zwei junge Physiker: Marie Sklodowska und Pierre Curie. Sie heiraten und leisten gemeinsam Grosses fuer die Wissenschaft, erforschen die Radioaktivitaet und entdecken neue chemische Elemente. Zusammen erhalten sie den Nobelpreis. Marie und Pierre Curie fuehren eine Ehe, die ihrer Zeit weit voraus ist: Sie arbeiten gleichberechtigt miteinander, teilen ihre Gedanken und verfolgen ihre Plaene gemeinsam. Beiden eigen ist die absolute wissenschaftliche Neugier, die Liebe zur Natur und die Skepsis gegenueber der mondaenen Gesellschaft der Belle Epoque. Fast jeden Tag sind sie rund um die Uhr zusammen, dabei gibt es selten Spannungen. Wenn einer von beiden gesundheitliche Probleme hat - und das haben sie wegen der radioaktiven Belastung im Labor oft - ist der andere fuer ihn da und pflegt ihn. Nach nur zwoelf gemeinsamen Jahren der Liebe und Arbeit stirbt Pierre Curie. Marie zieht ihre beiden Toechter alleine gross und fuehrt die Forschungen weiter. 1911 erhaelt sie als erster Mensch zum zweiten Mal den

Mock-up test results of monoblock-type CFC divertor armor for JT-60SA

Energy Technology Data Exchange (ETDEWEB)

Higashijima, S. [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)], E-mail: higashijima.satoru@jaea.go.jp; Sakurai, S.; Suzuki, S.; Yokoyama, K.; Kashiwa, Y.; Masaki, K.; Shibama, Y.K.; Takechi, M.; Shibanuma, K.; Sakasai, A.; Matsukawa, M.; Kikuchi, M. [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

2009-06-15

The JT-60 Super Advanced (JT-60SA) tokamak project starts under both the Japanese domestic program and the international program 'Broader Approach'. The maximum heat flux to JT-60SA divertor is estimated to {approx}15 MW/m{sup 2} for 100 s. Japan Atomic Energy Agency (JAEA) has developed a divertor armor facing high heat flux in the engineering R and D for ITER, and it is concluded that monoblock-type CFC divertor armor is promising for JT-60SA. The JT-60SA armor consists of CFC monoblocks, a cooling CuCrZr screw-tube, and a thin oxygen-free high conductivity copper (OFHC-Cu) buffer layer between the CFC monoblock and the screw-tube. CFC/OFHC-Cu and OFHC-Cu/CuCrZr joints are essential for the armor, and these interfaces are brazed. Needed improvements from ITER engineering R and D are good CFC/OFHC-Cu and OFHC-Cu/CuCrZr interfaces and suppression of CFC cracking. For these purposes, metalization inside CFC monoblock is applied, and we confirmed again that the mock-up has heat removal capability in excess of ITER requirement. For optimization of the fabrication method and understanding of the production yield, the mock-ups corresponding to quantity produced in one furnace at the same time is also produced, and the half of the mock-ups could remove 15 MW/m{sup 2} as required. This paper summarizes the recent progress of design and mock-up test results for JT-60SA divertor armor.

Magustoit filmihuvilistele lastele / Maris Balbat

Index Scriptorium Estoniae

Balbat, Maris, 1936-

2002-01-01

25. oktoobrist tuleb Coca-Cola Plaza ekraanile USA joonisfilm "Jääaeg" ("Ice Age"), mille dubleerimisse on režissöör Janno Põldma juhtimisel kaasatud head eesti näitlejad Anu Lamp, Lembit Ulfsak, Marko Matvere jt

Studies on capillary tube expansion device used in J-T refrigerators operating with nitrogen-hydrocarbon mixtures

Science.gov (United States)

Harish Kruthiventi, S. S.; Venkatarathnam, G.

2017-10-01

Capillary tube expansion devices are used extensively in small closed cycle J-T refrigerators operating with refrigerant mixtures due to its low cost and the absence of any moving parts. It is possible for J-T refrigerators operating with mixtures that the velocity of refrigerant mixture at capillary tube outlet reaches a value where it equals the speed of sound at certain conditions. The variation of the speed of sound of nitrogen-hydrocarbon mixtures used in J-T refrigerators has been studied in two phase (vapour-liquid) and three-phase (Vapour-liquid-liquid) region as a function of temperature and pressure in this work. Also the conditions under which choking occurs in practical J-T refrigerators is investigated.

Pneumatic pellet injector for JT-60

International Nuclear Information System (INIS)

Onozuka, Masanori; Hiratsuka, Hajime; Kawasaki, Kouzo.

1990-01-01

The pneumatic 4-shot pellet injector has been installed and operated for JT-60 (JAERI Tokamak-60). The performance tests have proven that the device provides high speed pellets as planned. The maximum pellet velocity obtained in the hydrogen pellet tests is greater than 2.3km/s at 100 bar propellant gas. (author)

Pneumatic pellet injector for JT-60

Energy Technology Data Exchange (ETDEWEB)

Onozuka, Masanori (Mitsubishi Heavy Industries Ltd., Tokyo (Japan)); Hiratsuka, Hajime; Kawasaki, Kouzo

1990-11-01

The pneumatic 4-shot pellet injector has been installed and operated for JT-60 (JAERI Tokamak-60). The performance tests have proven that the device provides high speed pellets as planned. The maximum pellet velocity obtained in the hydrogen pellet tests is greater than 2.3km/s at 100 bar propellant gas. (author).

Heat structural problems in JT-60

International Nuclear Information System (INIS)

Takatsu, Hideyuki; Shimizu, Masaomi; Yamamoto, Masahiro; Nakamura, Hiroo; Miyauchi, Yasuyuki.

1980-01-01

The construction of JT-60 is in progress to study the behavior of hydrogen plasma. The D-T reaction does not occur in this device, therefore the considerations for neutron damage, tritium leakage and so on are not necessary. The long-pulse operation will be done, and the suppression of the production and mixing of impurity is considered in the design of the JT-60. The high temperature baking is possible, and the magnetic limiter is set. The vacuum container has the complex structure consists of 8 sector type thick rings and 8 U-shaped bellows, and has egg-shaped cross section. The main radius of the torus is about 3 m. The material of the vacuum container is INCONEL 625. The analyses of various stresses due to such as atmospheric pressure, eddy current and thermal expansion were made. It is also necessary to consider the thermal stress due to the leakage of neutral beam. The thermal input of about 20 MW per one discharge to the first wall is taken into consideration. The material of the first wall is molybdenum. (Kato, T.)

Injection control development of the JT-60U electron cyclotron heating system

Energy Technology Data Exchange (ETDEWEB)

Hiranai, Shinichi; Shinozaki, Shin-ichi; Yokokura, Kenji; Moriyama, Shinichi [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Sato, Fumiaki [Nippon Advanced Technology Co., Ltd., Tokai, Ibaraki (Japan); Suzuki, Yasuo [Atomic Energy General Service Co., Ltd., Tokai, Ibaraki (Japan); Ikeda, Yoshitaka [Japan Atomic Energy Research Inst., Kashiwa, Chiba (Japan)

2003-03-01

The JT-60U electron cyclotron heating (ECH) System injects a millimeteric wave at 110 GHz into the JT-60 Plasma, and heats the plasma or drives a current locally to enhance the confinement performance of the JT-60 plasma. The system consists of four sets of high power gyrotrons, high voltage power supplies and transmission lines, and two antennas that launch electron cyclotron (EC) beams toward the plasma. The key features of the injection control system are streering of the direction of the EC beam by driving the movable mirror in the antenna, and capability to set any combination of polarization angle and ellipticity by rotating the two grooved mirrors in the polarizers. This report represents the design, fabrication and improvements of the injection control system. (author)

Review of JT-60U experimental results from March to October, 1991

International Nuclear Information System (INIS)

1992-06-01

Experimental results achieved in the initial operation of JT-60U are described in this paper. Experiments of JT-60U were initiated in March 1991, and deuterium experiments started in the middle of July. Multivariable non-interacting control, H-mode experiments, the high-q and high-β p regime with hot ion enhanced confinement, the divertor heat flux, etc. are reported. Achieved values of the first experiment of the JT-60U LHCD in 1991 were P LH = 1.5 MW, driven current I RF = 2MA, current drive efficiency η CD (=n-bar e R p I RF /P LH ) = 0.25 x 10 20 m -2 A/W and current driven product CDP(=n-bar e R p I RF ) = 3 x 10 20 m -2 MA. (J.P.N.)

JT-60 database system, 2

International Nuclear Information System (INIS)

Itoh, Yasuhiro; Kurihara, Kenichi; Kimura, Toyoaki.

1987-07-01

The JT-60 central control system, ''ZENKEI'' collects the control and instrumentation data relevant to discharge and device status data for plant monitoring. The former of the engineering data amounts to about 3 Mbytes per shot of discharge. The ''ZENKEI'' control system which consists of seven minicomputers for on-line real-time control has little performance of handling such a large amount of data for physical and engineering analysis. In order to solve this problem, it was planned to establish the experimental database on the Front-end Processor (FEP) of general purpose large computer in JAERI Computer Center. The database management system (DBMS), therefore, has been developed for creating the database during the shot interval. The engineering data are shipped up from ''ZENKEI'' to FEP through the dedicated communication line after the shot. The hierarchical data model has been adopted in this database, which consists of the data files with tree structure of three keys of system, discharge type and shot number. The JT-60 DBMS provides the data handling packages of subroutines for interfacing the database with user's application programs. The subroutine packages for supporting graphic processing and the function of access control for security of the database are also prepared in this DBMS. (author)

Energetic particle physics in JT-60U and JFT-2M

Energy Technology Data Exchange (ETDEWEB)

Shinohara, K [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Takechi, M [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Ishikawa, M [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Kusama, Y [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Tsuzuki, K [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Urata, K [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Kawashima, H [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Tobita, K [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Fukuyama, A [Department of Nuclear Engineering, Kyoto University, 606-8501, (Japan); Cheng, C Z [Princeton Plasma Physics Laboratory, PO Box 451, Princeton, NJ 08543 (United States); Darrow, D S [Princeton Plasma Physics Laboratory, PO Box 451, Princeton, NJ 08543 (United States); Kramer, G J [Princeton Plasma Physics Laboratory, PO Box 451, Princeton, NJ 08543 (United States); Gorelenkov, N N [Princeton Plasma Physics Laboratory, PO Box 451, Princeton, NJ 08543 (United States); Nazikian, R [Princeton Plasma Physics Laboratory, PO Box 451, Princeton, NJ 08543 (United States); Todo, Y [National Institute for Fusion Science, Oroshi-cho, Toki, Gifu, 509-5292, (Japan); Miura, Y [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan); Ozeki, T [Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki, 311-0193 (Japan)

2004-07-01

Recent energetic particle physics research in JT-60U and JFT-2M is reported. Alfven eigenmodes (AEs) are investigated in reversed-shear (RS) plasmas in JT-60U where frequency sweeping (FS) modes are observed to follow the q-profile evolution. The RS-induced AE model can explain the FS of the modes within the context of an evolving q-profile. Enhanced energetic ion transport is also investigated with the appearance of modes in the toroidicity-induced AE range of frequency in JT-60U using a multi-channel neutron profile monitor and in JFT-2M using a lost ion probe. Additionally, the ripple loss in the complex toroidal field ripple due to ferritic steel inserts in JFT-2M is shown and compared with model analysis. The simulation code developed to predict ripple loss in JFT-2M will be of use in estimating the heat flux in the complex ripple field of a future device such as ITER.

Divertor pumping system with NBI cryopump for JT-60

International Nuclear Information System (INIS)

Akino, Noboru; Kuriyama, Masaaki; Ohga, Tokumichi; Seki, Hiroshi; Tanai, Yutaka

1998-08-01

The pumping system for JT-60 W-shape divertor with the NBI cryopump have been developed. The pumping speed achieved in the divertor region was 13-15 m 3 /s for deuterium gas with three units of the NBI cryopumps. In a simulation experiment of helium ash exhaust through the divertor, pumping of a mixed gas of helium and deuterium has been demonstrated using the NBI cryosorption pumps covered with an argon condensed layer. Control of neutral particle pressure in the divertor region became possible by having remodeled an aperture of the existing fast shutter, which is installed between the JT-60 vacuum vessel and NBI beam-line, to be regulated. (author)

Marie Curie; Marie Curie

Energy Technology Data Exchange (ETDEWEB)

Trotereau, J.

2011-07-01

The legend has only retained from Marie Curie (1867-1934) the image of a hard and brilliant worker, pioneer in the radioactivity domain, and who awarded twice the Nobel Price. Behind the scientist, there is a women, Marya Salomea Sklodowska, the 'Polish', who was considered during some time as an 'alien', an 'atheistic intellectual', an 'emancipated women'. When she died alone in July 1934, after an exhausting life of labour, her funeral led to no official ceremony or speech. This small book summarizes the biography of the most famous female scientist in the world

Marie Underile pühendatakse konverents

Index Scriptorium Estoniae

2008-01-01

Tartus Eesti Kirjandusmuuseumis toimuvast Marie Underi 125. sünniaastapäevale pühendatud konverentsist ja näitusest "Kunsti Marie Underi kodust". Vt. ka Keel ja Kirjandus, nr. 4, 2008, lk. 317; Looming, nr. 4, 2008, lk. 635; Keel ja Kirjandus, nr. 7, lk. 570-572

Conceptual design of JT-60SA cryostat

International Nuclear Information System (INIS)

Shibama, Y.K.; Sakurai, S.; Masaki, K.; Sukekawa, A.M.; Kaminaga, A.; Sakasai, A.; Matsukawa, M.

2008-01-01

This paper describes the conceptual design of cryostat for the JT-60SA, which is a research device for the commercial production of electricity from the controlled fusion reaction in the future. JT-60SA is designed to be a fully superconducting device and cryostat is one of the main components to allow the normal operation. Cryostat covers up the tokamak device, which is 15 m of total height and 7 m of radius, and supports the total weight of 25 MN. Cryostat components consist of vessel body, gravity support and auxiliary systems, such as 80 K thermal shield and vacuum exhaust. The functions required of cryostat are these three, thermal insulation for superconducting magnets, gravity support for the tokamak device, and bio-shielding. The design conditions for each cryostat component are outlined and the features of auxiliary systems such as capacity of vacuum exhaust related to 80 K thermal shield design are summarized

JT-60 configuration parameters for feedback control determined by regression analysis

Energy Technology Data Exchange (ETDEWEB)

Matsukawa, Makoto; Hosogane, Nobuyuki; Ninomiya, Hiromasa (Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment)

1991-12-01

The stepwise regression procedure was applied to obtain measurement formulas for equilibrium parameters used in the feedback control of JT-60. This procedure automatically selects variables necessary for the measurements, and selects a set of variables which are not likely to be picked up by physical considerations. Regression equations with stable and small multicollinearity were obtained and it was experimentally confirmed that the measurement formulas obtained through this procedure were accurate enough to be applicable to the feedback control of plasma configurations in JT-60. (author).

JT-60 configuration parameters for feedback control determined by regression analysis

International Nuclear Information System (INIS)

Matsukawa, Makoto; Hosogane, Nobuyuki; Ninomiya, Hiromasa

1991-12-01

The stepwise regression procedure was applied to obtain measurement formulas for equilibrium parameters used in the feedback control of JT-60. This procedure automatically selects variables necessary for the measurements, and selects a set of variables which are not likely to be picked up by physical considerations. Regression equations with stable and small multicollinearity were obtained and it was experimentally confirmed that the measurement formulas obtained through this procedure were accurate enough to be applicable to the feedback control of plasma configurations in JT-60. (author)

Mary Shelley as editor of Percy Shelley

OpenAIRE

Allen, Richard

2001-01-01

This chapter explores Mary Shelley's work as the founding editor of Percy Shelley's poetry. It sets out the circumstances of Mary Shelley's life after the death of Percy Shelley, her financial dependence on Percy Shelley's father, and the restrictions placed on publication by Shelley's father. It then sets out the strategies Mary Shelley used to construct a biography of Percy Shelley from the poem, thus establishing a Romantic biography of Percy Shelley which has endured into the 20th century,

Mari e-raamatukogu / Tatjana Verina ; vene keelest tõlkinud Ene Riet

Index Scriptorium Estoniae

Verina, Tatjana

2011-01-01

Mari e-raamatukogu loomise aluseks on Mari-Eli Vabariigi etnokultuuriliste ja rahvusvaheliste suhete arendamise projekt, hetkel on elektroonilises raamatukogus 52 täistekstilist teavikut Tšavaini nimelise Mari Rahvusraamatukogu haruldaste raamatute kogust

75 FR 27972 - Airworthiness Directives; Pratt & Whitney JT8D-9, -9A, -11, -15, -17, and -17R Turbofan Engines

Science.gov (United States)

2010-05-19

..., MAN- JT8D-2-06 and the Engine Manual Chapter/Section 72-33-21, Inspection 00. Definitions (i) For the... the technical contents of PW JT8D Maintenance Advisory Notice MAN-JT8D-2-06, dated November 20, 2006... Advisory Notice, MAN-JT8D-2-06 and the Engine Manual Chapter/Section 72-33-21, Inspection 00. (g) For...

Comparison of transient electron heat transport in LHD helical and JT-60U tokamak plasmas

International Nuclear Information System (INIS)

Inagaki, S.; Ida, K.; Tamura, N.; Shimozuma, T.; Kubo, S.; Nagayama, Y.; Kawahata, K.; Sudo, S.; Ohkubo, K.; Takenaga, H.; Isayama, A.; Takizuka, T.; Kamada, Y.; Miura, Y.

2005-01-01

Transient transport experiments are performed in plasmas with and without Internal Transport Barrier (ITB) on LHD and JT-60U. The dependence of χ e on electron temperature, T e , and electron temperature gradient, ∇T e , is analyzed by an empirical non-linear heat transport model. In plasmas without ITB, two different types of non-linearity of the electron heat transport are observed from cold/heat pulse propagation. The χ e depends on T e and ∇T e in JT-60U, while the ∇T e dependence is weak in LHD. Inside the ITB region, there is no or weak ∇T e dependence both in LHD and JT-60U. A cold pulse growing driven by the negative T e dependence of χ e is observed inside the ITB region (LHD) and near the boundary of the ITB region (JT-60U). (author)

Prazdnik podportshen / Oksana Smirnova, Vladimir Skripov, Vjatsheslav Ivanov...[jt.

Index Scriptorium Estoniae

2005-01-01

Ülevaade diskussioonist Eestis, Lätis ja Leedus presidentide osalemise üle 9. mai pidustustel Moskvas. Juhan Partsi, Villu Reiljani, Toomas Hendrik Ilvese, Marko Mihkelsoni jt. arvamusi. Toimetuse seisukoht

Remembering Mary Tyler Moore | MedlinPlus Magazine

Science.gov (United States)

... Remembering Mary Tyler Moore Follow us NIH MedlinePlus Magazine Remembers Mary Tyler Moore A little more than ... helped launch the first issue of NIH MedlinePlus magazine on Capitol Hill. The award-winning actress and ...

Requirements for tokamak remote operation: Application to JT-60SA

International Nuclear Information System (INIS)

Innocente, Paolo; Barbato, Paolo; Farthing, Jonathan; Giruzzi, Gerardo; Ide, Shunsuke; Imbeaux, Frédéric; Joffrin, Emmanuel; Kamada, Yutaka; Kühner, Georg; Naito, Osamu; Urano, Hajime; Yoshida, Maiko

2015-01-01

Highlights: • We analyzed the data management system (DMS) appropriate for international collaboration. • We define the principal requirements for all components of the DMS. • We evaluated application of DMS requirements to the JT-60SA experiment. • We evaluated the role network bandwidth and time delay between EU and Japan. - Abstract: Remote operation and data analysis are becoming key requirements of any fusion devices. In this framework a well-conceived data management system integrated with a suite of analysis and support tools are essential components for an efficient remote exploitation of any fusion device. The following components must be considered: data archiving data model architecture; remote data and computers access; pulse schedule, data analysis software and support tools; remote control room specifications and security issues. The definition of a device-generic data model plays also important role in improving the ability to share solution and reducing learning time. As for the remote control room, the implementation of an Operation Request Gateway has been identified as an answer to security issues meanwhile remotely proving all the required features to effectively operate a device. Previous requirements have been analyzed for the new JT-60SA tokamak device. Remote exploitation is paramount in the JT-60SA case which is expected to be jointly operated between Japan and Europe. Due to the geographical distance of the two parties an optimal remote operation and remote data-analysis is considered as a key requirement in the development of JT-60SA. It this case the effects of network speed and delay have been also evaluated and tests have confirmed that the performance can vary significantly depending on the technology used.

Requirements for tokamak remote operation: Application to JT-60SA

Energy Technology Data Exchange (ETDEWEB)

Innocente, Paolo, E-mail: paolo.innocente@igi.cnr.it [Consorzio RFX, Corso Stati Uniti 4, 35127 Padova (Italy); Barbato, Paolo [Consorzio RFX, Corso Stati Uniti 4, 35127 Padova (Italy); Farthing, Jonathan [CCFE, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Giruzzi, Gerardo [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Ide, Shunsuke [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Imbeaux, Frédéric; Joffrin, Emmanuel [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Kamada, Yutaka [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Kühner, Georg [Max-Planck-Institute for Plasma Physics, EURATOM Association, Wendelsteinstr. 1, 17491 Greifswald (Germany); Naito, Osamu; Urano, Hajime; Yoshida, Maiko [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan)

2015-10-15

Highlights: • We analyzed the data management system (DMS) appropriate for international collaboration. • We define the principal requirements for all components of the DMS. • We evaluated application of DMS requirements to the JT-60SA experiment. • We evaluated the role network bandwidth and time delay between EU and Japan. - Abstract: Remote operation and data analysis are becoming key requirements of any fusion devices. In this framework a well-conceived data management system integrated with a suite of analysis and support tools are essential components for an efficient remote exploitation of any fusion device. The following components must be considered: data archiving data model architecture; remote data and computers access; pulse schedule, data analysis software and support tools; remote control room specifications and security issues. The definition of a device-generic data model plays also important role in improving the ability to share solution and reducing learning time. As for the remote control room, the implementation of an Operation Request Gateway has been identified as an answer to security issues meanwhile remotely proving all the required features to effectively operate a device. Previous requirements have been analyzed for the new JT-60SA tokamak device. Remote exploitation is paramount in the JT-60SA case which is expected to be jointly operated between Japan and Europe. Due to the geographical distance of the two parties an optimal remote operation and remote data-analysis is considered as a key requirement in the development of JT-60SA. It this case the effects of network speed and delay have been also evaluated and tests have confirmed that the performance can vary significantly depending on the technology used.

Adaptation of Russian Christian Names into the Mari Language

Directory of Open Access Journals (Sweden)

Alexander L. Pustyakov

2017-11-01

Full Text Available This article analyses the phonetic and morphological adaptation of Christian personal names in the Mari language. The work examines personal names recorded in different regions among the Mari. The composition of the presented data is not exhaustive; it does, however, allow one to observe some general patterns of the adaptation process. The main part of the article is preceded by a brief overview of the Christianization of the Mari region and the contacts between the Mari and the Russian-speaking population; the features of the local dialects of the Russian language are briefly stated. The Mari language incorporated a significant number of Russian names. The source of loans included, besides the standard church name forms, also the numerous varieties found in the Russian dialects. As part of the study, phonetic, structural changes of Christian names in the Mari language are revealed and the reasons for the majority of these transformations are identified. The author also pays attention to the intermediary role of the neighbouring Turkic languages in the penetration of Russian names into the Mari language. Changes in borrowed names were induced by internal Mari linguistic rules, as well as dialectal features of the local Russian dialects. The identification of systematic phonetic and structural transformations helps to determine the origin of obscure anthroponyms.

Lady Mary Sidney Herbert a Lady Mary Wroth: labutí píseň a imaginativní svět jako součást rodinného odkazu (Lady Mary Sidney Herbert and Lady Mary Wroth: a Swan song and Fictional World as a part of Sidneyan legacy

Directory of Open Access Journals (Sweden)

Martina Kastnerová

2017-03-01

Full Text Available The study intends to clarify the process of forming of Sidneyan literary cult as a part of (Sidneyʼs family legacy based on the the literary activities of Sidneyʼs sister Lady Mary Sidney Herbert, countess of Pembroke, and his niece Lady Mary Wroth, daughter of his younger brother Robert. Mary Sidney Herbert throughout her literary career sings a swan song of her brother, Mary Wroth creates an imaginative world of free love choice and happy endings and her literary career is based on the well-established cult of Sidneyʼs name.

Review of JT-60 experiment (March 1986)

International Nuclear Information System (INIS)

1986-11-01

Results of JT-60 experiment with ohmic heating in March 1986 are summarized. A maximum plasma current of 2 MA, an average plasma density of 5.7 x 10 19 m -3 and energy confinement time of 0.4 - 0.5 sec were obtained. Detailed characteristics of ohmic plasmas are discussed. (author)

Impurity and particle recycling reduction by boronization in JT-60U

International Nuclear Information System (INIS)

Higashijima, S.; Sugie, T.; Kubo, H.; Tsuji, S.; Shimada, M.; Asakura, N.; Hosogane, N.; Kawano, Y.; Nakamura, H.; Itami, K.; Sakasai, A.; Shimizu, K.; Ando, T.; Saidoh, M.

1995-01-01

In JT-60U boronization using decaborane was carried out. Boronization reduced the oxygen impurity in OH discharges and shortened the wall conditioning after the vacuum vessel vent and consequently enabled JT-60U to produce clean plasmas easily except for NB heated plasmas. After boronization, particle recycling was reduced drastically in OH and NB discharges. High confinement plasmas were obtained including high β p mode and H-mode discharges. In the latest boronization part of divertor plates were replaced with B 4 C coated tiles with a B 4 C thickness similar 300 μm. After introducing B 4 C divertor tiles, an explosive generation of boron particles from the tiles was observed. By the combined effects of boronization with decaborane and boron generation from B 4 C tiles, oxygen impurity was so low that oxygen line signals were reduced to noise levels after the latest boronization. On the other hand, boron burst from the B 4 C tiles restricted the operation of JT-60U. ((orig.))

Disruption Studies in JT-60U

International Nuclear Information System (INIS)

Kawano, Y.; Yoshino, R.; Neyatani, Y.; Nakamura, Y.; Tokuda, S.; Tamai, H.

2002-01-01

Intensive studies on the physics of disruptions and developments of avoidance/mitigation methods of disruption-related phenomena have being carried out in JT-60U. The characteristics of the disruption sequence were well understood from the observation of the relationship between the heat pulse onto divertor plates during thermal quench and the impurity influx into the plasma, which determined the speed of the following current quench. A fast shutdown was first demonstrated by injecting impurity ice pellets to the plasma and intensively reducing the heat flux on first wall. The halo current and its toroidal asymmetry were precisely measured, and the halo current database was made for ITER in a wide parameter range. It was found that TPF x I h /I p0 was 0.52 at the maximum in a large tokamak like the JT-60U, whereas the higher factor of 0.75 had been observed in medium-sized tokamaks such as Alcator C-Mod and ASDEX-Upgrade. The vertical displacement event (VDE) at the start of the current quench was carefully investigated, and the neutral point where the VDE hardly occurs was discovered. MHD simulations clarified the onset mechanisms of the VDE, in which the eddy current effect of the up-down asymmetric resistive shell was essential. The real-time Z j measurement was improved for avoiding VDEs during slow current quench, and plasma-wall interaction was avoided by a well-optimized plasma equilibrium control. Magnetic fluctuations that were spontaneously generated at the disruption and/or enhanced by the externally applied helical field have been shown to avoid the generation of runaway electrons. Numerical analysis clarified an adequate rate of collisionless loss of runaway electrons in turbulent magnetic fields, which was consistent with the avoidance of runaway electron generation by magnetic fluctuations observed in JT-60U. Once generated, runaway electrons were suppressed when the safety factor at the plasma surface was reduced to 3 or 2

Moved by Mary: the power of pilgrimage in the modern world

NARCIS (Netherlands)

Hermkens, A.K.; Jansen, W.H.M.; Notermans, C.D.

2009-01-01

The Virgin Mary continues to attract devotees to her images and shrines. In Moved by Mary, anthropologists, geographers and historians explore how people and groups around the world identify and join with Mary in their struggle against social injustice, and how others mobilize Mary to impose ideas

Jean-Marie Dufour 1937-2007

CERN Multimedia

2007-01-01

Picture taken by Rudiger Voss in the Legal Service LibraryJean-Marie Dufour, CERN Legal Advisor from 1974 until his retirement in 2001, passed away on 8 July. For us, his colleagues in the Legal Service, Jean-Marie was a tutor and a reference, who passed on to us his passion for the practice of law in an intergovernmental organisation. As a boss, his abiding managerial quality was his unstinting loyalty to his collaborators. Jean-Marie joined CERN in 1966 and for the next 35 years was to be the guardian of the Laboratory’s rules. This was his view of the Organization: "...I have discovered [at CERN] a fascinating universe driven by two forces: science and Europe; a world of physicists and engineers who, encouraged by the States of Europe, run a remarkable Laboratory, where Europeans have achieved reconciliation and restored the grand tradition of European physics, attracting physicists from around the world; a Laboratory that transcends not only the fro...

Development of a linear motion antenna for the JT-60SA ECRF system

International Nuclear Information System (INIS)

Moriyama, Shinichi; Kobayashi, Takayuki; Isayama, Akihiko; Hoshino, Katsumichi; Suzuki, Sadaaki; Hiranai, Shinichi; Yokokura, Kenji; Sawahata, Masayuki; Terakado, Masayuki; Hinata, Jun; Wada, Kenji; Sato, Yoshikatsu

2013-01-01

Highlights: ► Development of an antenna featuring linear motion (LM) concept for long pulse electron cyclotron range of frequency (ECRF) heating and current drive in JT-60SA is in progress. ► A mock-up using a metallic sliding bearing with solid lubricant was fabricated. ► A vacuum pumping test with mass analyzer showed evidence of some hydrocarbons during shaft motion. ► Injection beam profile in toroidal beam scan was checked by low power measurement with mock-up. ► Current drive characteristics with the LM antenna for typical experimental scenarios of JT-60SA have been investigated by calculation. -- Abstract: Development of an antenna that features the linear motion (LM) concept for long-pulse electron-cyclotron range of frequency heating and current drive for the JT-60SA is in progress. Combining a linearly movable first mirror and a fixed curved second mirror allows the injection-beam angle to be controlled. Cooling water is fed through the drive shaft for the first mirror and through the fixed support for the second mirror. The shaft support structure uses a metallic sliding bearing with a solid lubricant. The sliding bearing supports combined linear and rotational motion, whereas a conventional ball bearing supports either linear or rotational motion. Therefore, the sliding bearing offers the advantage of reducing the support-structure volume, which is important in the design of the relatively narrow port duct of the JT-60SA. Recently, the sliding bearing has been installed into the mockup. Results of a vacuum test with a mass analyzer indicate the presence of hydrocarbons during shaft motion. The injection-beam profile obtained from a toroidal beam scan is checked against low-power measurements taken on the mockup. Finally, for typical JT-60SA experimental scenarios, heating- and current-drive characteristics of the LM antenna are investigated theoretically

Mary Anne Chambers | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

A former Member of Provincial Parliament, Mary Anne served as Minister of Training, Colleges and Universities, and Minister of Children and Youth Services in the Government of Ontario. She is also a former senior vice-president of Scotiabank. A graduate of the University of Toronto, Mary Anne has received honorary ...

MaRIE Undulator & XFEL Systems

Energy Technology Data Exchange (ETDEWEB)

Nguyen, Dinh Cong [Los Alamos National Laboratory; Marksteiner, Quinn R. [Los Alamos National Laboratory; Anisimov, Petr Mikhaylovich [Los Alamos National Laboratory; Buechler, Cynthia Eileen [Los Alamos National Laboratory

2015-03-23

The 22 slides in this presentation treat the subject under the following headings: MaRIE XFEL Performance Parameters, Input Electron Beam Parameters, Undulator Design, Genesis Simulations, Risks, and Summary It is concluded that time-dependent Genesis simulations show the MaRIE XFEL can deliver the number of photons within the required bandwidth, provided a number of assumptions are met; the highest risks are associated with the electron beam driving the XFEL undulator; and risks associated with the undulator and/or distributed seeding technique may be evaluated or retired by performing early validation experiments.

Diagnostic system for passive charge-exchange particle measurements on JT-60

International Nuclear Information System (INIS)

Nemoto, Masahiro; Tobita, Kenji; Kusama, Yoshinori; Takeuchi, Hiroshi

1988-01-01

In order to measure energy distributions of the charge-exchange neutral particles in the JT-60 experiments, a compact size electrostatic energy analyzer which the measurable energy range is from 1 keV to 100 keV is developed successfully. Compactness of an analyzer is accomplished by setting an accelerator between a gas stripping cell and a deflector of 45deg injection type. The calibration of the analyzer was carried out owing to confirm the capability of energy analysis and stripping efficiency. This analyzer was applied to measure the energy distribution in additionally heated plasmas in JT-60. The usefullness of the analyzer was confirmed. (author)

Development and Operational Experiences of the JT-60U Tokamak and Power Supplies

International Nuclear Information System (INIS)

Hosogane, N.; Ninomiya, H.; Matsukawa, M.; Ando, T.; Neyatani, Y.; Horiike, H.; Sakurai, S.; Masaki, K.; Yamamoto, M.; Kodama, K.; Sasajima, T.; Terakado, T.; Ohmori, S.; Ohmori, Y.; Okano, J.

2002-01-01

The design of the JT-60U tokamak, the configuration of the coil power supplies, and the operational experiences gained to date are reviewed. JT-60U is a large tokamak upgraded from the original JT-60 in order to obtain high plasma current, large plasma volume, and highly elongated divertor configurations. All components inside the toroidal magnetic field coils, such as vacuum vessel, poloidal magnetic field coils, divertor, etc., were modified. Various technologies and ideas were introduced to develop these components; for example, a multi-arc double skin wall structure for the vacuum vessel and a functional poloidal magnetic field coil system with taps for obtaining various plasma configurations. Furthermore, boron-carbide coated carbon fiber composite (CFC) tiles were used as divertor tiles to reduce erosion of carbon-base tiles. Later, a semiclosed divertor with pumps, for which cryo-panels originally used for NBI units were converted, was installed in the replacement of the open divertor. These development and operational results provide data for future tokamaks. Major failures experienced in the long operational period of JT-60U, such as water leakage from the toroidal magnetic field coil, fracture of carbon tiles, and breakdown of a filter capacitor, are described. As a maintenance issue for tokamaks using deuterium fueling gas, a method for reducing radiation exposure of in-vessel workers is described

Construction of negative-ion based NBI for JT-60U

International Nuclear Information System (INIS)

Kawai, Mikito; Akino, Noboru; Ebisawa, Noboru

2001-11-01

The world's first negative-ion based neutral beam injector (N-NBI) system has been developed for studies of non-inductive current drive and plasma core heating with high energy neutral beam injection in higher density plasma. Construction of the N-NBI system for JT-60U was completed in March 1996. The system is composed of a beamline with two ion sources, a set of ion source power supplies, control system and auxiliary sub-system such as cooling water, refrigeration and vacuum system. In July 2001, deuterium neutral beam injection of 400keV and 5.8MW into JT-60U plasma was achieved. In order to increase both beam power and energy we have to go on more improvement of the N-NBI. (author)

Study of neutral particle behavior and particle confinement in JT-60U

International Nuclear Information System (INIS)

Takenaga, Hidenobu; Shimizu, Katsuhiro; Asakura, Nobuyuki; Shimada, Michiya; Kikuchi, Mitsuru; Tsuji-Iio, Shunji; Uchino, Kiichiro; Muraoka, Katsunori.

1995-07-01

In order to understand the particle confinement properties in JT-60U, the particle confinement time was estimated through analyses of the neutral particle behavior. First, the neutral particle transport simulation code DEGAS using a Monte-Carlo technique was combined with the simple divertor code for calculating the edge plasma parameters, and was developed to calculate under the experimental conditions in JT-60U. Then, the charged particle source in the main plasma due to the ionization of the neutral particles was evaluated from the analyses of the neutral particle penetration to the main plasma based on results of the simulation code and measurements of D α emission intensities. Finally, the particle confinement time was estimated from the analysis of particle balance. The analyses were performed systematically for the L-mode plasma and H-mode plasma of JT-60U, and a data base of the particle confinement time was obtained. The dependence of the particle confinement time on the plasma parameters and the relationship between the properties of the particle confinement and the energy confinement were examined. (author)

A jolly good call for Marie Curie Fellows

CERN Multimedia

2009-01-01

A new funding opportunity to train young researchers has just been announced by the European Commission. One of the calls within FP7 Marie Curie Actions requests proposals for Initial Training Network (ITN) projects, with a deadline of 22 December 2009. Project proposals are strongly encouraged at CERN and authors can receive support and guidance from the Marie Curie Steering Group. Winnie Wong: "I wouldn’t have considered a PhD if I hadn’t been a Marie Curie fellow" Dan Savu: "It’s the best of both worlds: training plus working in an international organisation" ITN projects have one key aim: training. Academic and industrial partners work together to form a network to recruit and train Marie Curie Fellows. Fellows are young researchers (typically PhD-level) from any country who combine project-based research with tailor-made training programmes, ...

Meet EPA Scientist Marie O'Shea, Ph.D.

Science.gov (United States)

EPA Scientist Dr. Marie O'Shea is Region 2's Liaison to the Agency's Office of Research and Development (ORD). Marie has a background in research on urban watershed management, focused on characterizing and controlling nutrients in stormwater runoff.

Analysis of JT-60SA operational scenarios

Science.gov (United States)

Garzotti, L.; Barbato, E.; Garcia, J.; Hayashi, N.; Voitsekhovitch, I.; Giruzzi, G.; Maget, P.; Romanelli, M.; Saarelma, S.; Stankiewitz, R.; Yoshida, M.; Zagórski, R.

2018-02-01

Reference scenarios for the JT-60SA tokamak have been simulated with one-dimensional transport codes to assess the stationary state of the flat-top phase and provide a profile database for further physics studies (e.g. MHD stability, gyrokinetic analysis) and diagnostics design. The types of scenario considered vary from pulsed standard H-mode to advanced non-inductive steady-state plasmas. In this paper we present the results obtained with the ASTRA, CRONOS, JINTRAC and TOPICS codes equipped with the Bohm/gyro-Bohm, CDBM and GLF23 transport models. The scenarios analysed here are: a standard ELMy H-mode, a hybrid scenario and a non-inductive steady state plasma, with operational parameters from the JT-60SA research plan. Several simulations of the scenarios under consideration have been performed with the above mentioned codes and transport models. The results from the different codes are in broad agreement and the main plasma parameters generally agree well with the zero dimensional estimates reported previously. The sensitivity of the results to different transport models and, in some cases, to the ELM/pedestal model has been investigated.

Structural analysis of the JT-60SA cryostat vessel body

Energy Technology Data Exchange (ETDEWEB)

Botija, José, E-mail: jose.botija@ciemat.es [Association EURATOM – CIEMAT, Avda. Complutense 40, 28040 Madrid (Spain); Alonso, Javier; Fernández, Pilar; Medrano, Mercedes; Ramos, Francisco; Rincon, Esther; Soleto, Alfonso [Association EURATOM – CIEMAT, Avda. Complutense 40, 28040 Madrid (Spain); Davis, Sam; Di Pietro, Enrico; Tomarchio, Valerio [Fusion for Energy, JT-60SA European Home Team, 85748 Garching bei Munchen (Germany); Masaki, Kei; Sakasai, Akira; Shibama, Yusuke [JAEA – Japan Atomic Energy Agency, Naka Fusion Institute, Ibaraki 311-0193 (Japan)

2013-10-15

Highlights: ► Structural analysis to validate the JT-60SA cryostat vessel body design. ► Design code ASME 2007 “Boiler and Pressure Vessel Code. Section VIII”. ► First buckling mode: load multiplier of 10.644, higher than the minimum factor 4.7. ► Elastic and elastic–plastic stress analysis meets ASME against plastic collapse. ► Bolted fasteners have been analyzed showing small gaps closed by strong welding. -- Abstract: The JT-60SA cryostat is a stainless steel vacuum vessel (14 m diameter, 16 m height) which encloses the Tokamak providing the vacuum environment (10{sup −3} Pa) necessary to limit the transmission of thermal loads to the components at cryogenic temperature. It must withstand both external atmospheric pressure during normal operation and internal overpressure in case of an accident. The paper summarizes the structural analyses performed in order to validate the JT-60SA cryostat vessel body design. It comprises several analyses: a buckling analysis to demonstrate stability under the external pressure; an elastic and an elastic–plastic stress analysis according to ASME VIII rules, to evaluate resistance to plastic collapse including localized stress concentrations; and, finally, a detailed analysis with bolted fasteners in order to evaluate the behavior of the flanges, assuring the integrity of the vacuum sealing welds of the cryostat vessel body.

Kaurismäki ja Almodovar võtavad Cannes'is mõõtu / Andres Laasik

Index Scriptorium Estoniae

Laasik, Andres, 1960-2016

2006-01-01

Filmidest, mis osalevad 17. mail algava Cannes'i filmifestivali võistlusprogrammis : Aki Kaurismäki "Äärelinna tuled" ("Laitakaupungin valot"), Pedro Almodovari "Tagasipöördumine" ("Volver"), Sofia Coppola "Marie-Antoinette" jt

Quality control of the software in the JT-60 computer control system

International Nuclear Information System (INIS)

Isaji, Nobuaki; Kurihara, Kenichi; Kimura, Toyoaki

1990-07-01

The JT-60 Control System should be improved corresponding to the experimental requirements. In order to keep the integrity of the system even in the modification the concept of quality control (QC) was introduced in the software development. What we have done for QC activity are (1) to establish standard procedures of the software development, (2) to develop support tools for grasping the present status of the program structure, and (3) to develop a document system, and a source program management system. This paper reports these QC activities and their problems for the JT-60 control system. (author)

Study of carbon impurity generation by chemical sputtering in JT-60U

International Nuclear Information System (INIS)

Higashijima, S.; Kubo, H.; Sugie, T.; Shimizu, K.; Asakura, N.; Itami, K.; Hosogane, N.; Sakasai, A.; Konoshima, S.; Sakurai, S.; Takenaga, H.

1997-01-01

CD/CH-band intensities emitted from hydrocarbon molecules have been measured in the divertor region of JT-60U and the chemical sputtering yield of methane was estimated as a function of the surface temperature and the deuterium ion flux. The chemical sputtering yield increases with the surface temperature and decreases with increasing ion flux density in the L-mode plasmas. The B 4 C converted CFC tiles are installed in JT-60U and it is found that the chemical sputtering of B 4 C converted CFC tiles is suppressed in comparison to normal CFC tiles. (orig.)

Farewell Jean-Marie Good Luck Eva Welcome back Franz

CERN Multimedia

2001-01-01

At the farewell reception offered by the Director-General, Professor Luciano Maiani, on the occasion of Jean-Marie Dufour's retirement from CERN, three generations of CERN Legal Counsel met. From right to left: Jean-Marie Dufour, who retires on 30 November 2001, after 35 years of service. Eva-Maria Gröniger-Voss, who takes over from Jean-Marie Dufour on 1st December 2001. Ambassador Franz Schmid, CERN Legal Counsel from 1971 to 1974.

Experimental study of radiation losses on the JT-60 tokamak

International Nuclear Information System (INIS)

Nishitani, Takeo

1990-06-01

Bolometric measurement system and associated diagnostics, soft x-ray pulse-height-analyzer, soft x-ray intensity and Balmer α line measurement systems, were developed to investigate the radiation losses of the JT-60 plasmas. The bolometric measurement is the most important diagnostics in the radiation loss study. The soft x-ray pulse-height-analyzer is useful to estimate the metallic impurity concentration, and the soft x-ray intensity and Balmer α line measurements are monitors of radiation in x-ray region and particle recycling in the plasma edge, respectively. In JT-60, the marfe has been observed frequently in high-Ip and high density limited discharges with NB heating after the replacement of the first wall from TiC coated molybdenum tiles to graphite ones. The threshold electron density of the marfe onset increased with the NB power. The empirical scaling of the marfe onset taking account of the NB power was obtained. This scaling was useful to predict the marfe onset condition in NB heated discharges on JT-60. The marfe was modelled based on the radiative thermal instability. The simple model can explain the marfe onset condition. The radiated power from the plasma with marfe was about 90 % of the absorbed power. Both stored energy and central electron temperatures did not change by the marfe onset in spite of the such intense radiation loss. Finally, this study revealed that the most clean plasma was obtained in the metallic first wall with the divertor on JT-60. This fact is suggesting the capability of the metallic material for the first wall of next devices. Enhance radiation localized in the peripheral plasma such as marfe and IDC does not degrade the core plasma confinement or somewhat improves it, so that marfe and IDC are suitable operational regime in the high density region for future devices because they have strong remote-radiative-cooling-effect. (J.P.N.)

Development of virtual private network for JT-60SA CAD integration

International Nuclear Information System (INIS)

Oshima, Takayuki; Fujita, Takaaki; Seki, Masami; Kawashima, Hisato; Hoshino, Katsumichi; Shibanuma, Kiyoshi; Verrecchia, M.; Teuchner, B.

2010-01-01

The CAD models will be exchanged and integrated at Naka for JT-60SA, a common computer network efficiently connected between Naka site and the Garching site is needed to be established. Virtual Private Network (VPN) was introduced with LAN on computer network physically-separated from JAEA intranet area and firewall. In July 2009, a new VPN connection between the Naka and Garching sites has been successfully demonstrated using IPSec-VPN technology with a commercial and cost-effective firewall/router for security. It was found that the introduction of the Wide Area File Service (WAFS) could solve the issue of the data transmission time and enhance the usability of the VPN for design integration in JT-60SA. (author)

Neural-net disruption predictor in JT-60U

International Nuclear Information System (INIS)

Yoshino, R.

2003-01-01

The prediction of major disruptions caused by the density limit, the plasma current ramp-down with high internal inductance l i , the low density locked mode and the β-limit has been investigated in JT-60U. The concept of 'stability level', newly proposed in this paper to predict the occurrence of a major disruption, is calculated from nine input parameters every 2 ms by the neural network and the start of a major disruption is predicted when the stability level decreases to a certain level, the 'alarm level'. The neural network is trained in two steps. It is first trained with 12 disruptive and six non-disruptive shots (total of 8011 data points). Second, the target output data for 12 disruptive shots are modified and the network is trained again with additional data points generated by the operator. The 'neural-net disruption predictor' obtained has been tested for 300 disruptive shots (128 945 data points) and 1008 non-disruptive shots (982 800 data points) selected from nine years of operation (1991-1999) of JT-60U. Major disruptions except for those caused by the -limit have been predicted with a prediction success rate of 97-98% at 10 ms prior to the disruption and higher than 90% at 30 ms prior to the disruption while the false alarm rate is 2.1% for non-disruptive shots. This prediction performance has been confirmed for 120 disruptive shots (56 163 data points), caused by the density limit, as well as 1032 non-disruptive shots (1004 611 data points) in the last four years of operation (1999-2002) of JT-60U. A careful selection of the input parameters supplied to the network and the newly developed two-step training of the network have reduced the false alarm rate resulting in a considerable improvement of the prediction success rate. (author)

Mechanism of vertical displacement events in JT-60U disruptive discharges

International Nuclear Information System (INIS)

Nakamura, Y.; Yoshino, R.; Neyatani, Y.; Tsunematsu, T.; Azumi, M.; Pomphrey, N.; Jardin, S.C.

1996-01-01

Enhanced vertical displacement events (VDEs), which are frequently observed in JT-60U disruptive discharges, are investigated using the Tokamak Simulation Code (TSC). The rapid plasma current quench can accelerate the vertical displacement, owing to both the up/down asymmetry of the eddy current distribution arising from the asymmetric geometry of the JT-60U vacuum vessel and the degradation of magnetic field decay index n, leading to high growth rates of positional instability. For a slightly elongated configuration (n = -0.9), the asymmetry of attractive forces on the toroidal plasma plays a dominant role in the VDE mechanism. For a more elongated configuration (n = -1.7), the degradation of field decay index n plays an important role on VDEs, in addition to the effect of asymmetric attractive forces. It is shown that the VDE characteristics of a highly elongated configuration with a rapid plasma current quench can be dominated by the field decay index degradation. It is also pointed out that both the softening of current quenches as was experimentally developed in the JT-60U tokamak, and the optimization of the allowable elongation of the plasma cross-section are critical issues in the development of a general control strategy of discharge termination. (author). 21 refs, 10 figs

Very fast feedback control of coil-current in JT-60 tokamak

International Nuclear Information System (INIS)

Aoyagi, T.; Terakado, T.; Takahashi, M.; Nobusaka, H.; Yagyu, J.; Matsuzaki, Y.

1992-01-01

A direct digital control (DDC) system is adopted for controlling thyristor converters of power supplies in the JT-60 tokamak built in 1984. Microcomputers of the DDC were 5 MHz i8086 microprocessor and programs were written by assembler language and the processing time was under 1ms. They were, however, too old in hardware and too complicated in software. New DDC system has been made in the JT-60 Upgrade (JT-60U) to control the power supplies more quickly under 0.25 and 0.5 ms of the processing time and also to write the programs used by high-level language. The new system consists of a host computer and five microcomputers with microprocessor on VME bus system. The host computer AS3260 performs on-line processing such as setting the DDC under the discharge conditions and so on. Functions of the microcomputers with a 32-bit, 20 MHz microprocessor MC68030, whose OS are VxWorks and programs are written by C language, are real-time processing such as taking in instructions from a ZENKEI computer and in feedback control of currents and voltages of coils every 0.25 and 0.5 ms. The system is now operating very smoothly. (author)

Design and Structural Analysis for the Vacuum Vessel of Superconducting Tokamak JT-60SC

International Nuclear Information System (INIS)

Kudo, Y.; Sakurai, S.; Masaki, K.; Urata, K.; Sasajima, T.; Matsukawa, M.; Sakasai, A.; Ishida, S.

2003-01-01

A modification of the JT-60 is planned to be a superconducting tokamak (JT-60SC) in order to establish steady-state operation of high beta plasma for 100 s, and to ensure the applicability of ferritic steel as a reduced activation material for reactor relevant break-even class plasmas. This paper describes the detailed design of the vacuum vessel, which has a unique structure for cost effective manufacturing, as well as structural analysis results for a feasibility study

Performance of RF power and phase control on JT-60 LHRF heating system

International Nuclear Information System (INIS)

Fujii, T.; Ikeda, Y.; Imai, T.; Honda, M.; Kiyono, K.; Maebara, S.; Saigusa, M.; Sakamoto, K.; Sawahata, M.; Seki, M.

1987-01-01

The performance of RF power and phase control on the JT-60 LHRFD heating system are presented. The JT-60 LHRF heating system has three units of huge RF source with a total output of 24 MW, each unit consisting of eight amplifier chains. A high power klystron generating 1 MW for 10 s at 2 GHz is used in each chain. Automatic gain control is employed to regulate the output power not only against gain fluctuations in the chain but also against the unstable plasma load without any output circulator for the klystron

Engineering international relations / Maris Riekstins ; interv. Talis Saule Archdeacon

Index Scriptorium Estoniae

Riekstins, Maris

2008-01-01

Läti annab peatselt Läänemeremaade Nõukogu eesistuja teatepulga üle Taanile. Läti välisminister Maris Riekstins Läänemeremaade Nõukogu teemadest ning suhetest Venemaaga. Maris Riekstins'i CV

Simulation of collisional effects on divertor pumping in JT-60SA

Energy Technology Data Exchange (ETDEWEB)

Gleason-González, C., E-mail: cristian.gleason@kit.edu [Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, Baden-Württemberg 76344 (Germany); Varoutis, S.; Luo, X. [Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, Baden-Württemberg 76344 (Germany); Shimizu, K.; Nakano, T.; Hoshino, K.; Kawashima, H.; Asakura, N. [Japan Atomic Energy Agency, 801-1, Mukoyama, Naka, Ibaraki 311-0193 (Japan); Day, Chr. [Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, Baden-Württemberg 76344 (Germany); Sakurai, S. [Japan Atomic Energy Agency, 801-1, Mukoyama, Naka, Ibaraki 311-0193 (Japan)

2016-11-01

Highlights: • The exhausted (sub-divertor) gas flows calculations in tokamaks by means of three approaches: ProVac3D, DIVGAS and NEUT2D. • Exhausted neutral gas flow is modeled for two scenarios of a simplified JT-60SA sub-divertor geometry. • A modelled scenario with a simplified setup is done by using two intrinsic collisionless approaches: ProVac3D and NEUT2D and a third approach: DIVGAS, which has been used without its collision module for a direct comparison with the other two. The solvers are cross-checked in terms of the reproduction of the transmission probability. • A second case study is based on the Scenario # 2 of JT-60SA, where the assessment of collisionality in the sub-divertor was done. The gas flow is simulated by using DIVGAS with and without consideration of collisions. • The results include the transmission probability in JT-60SA sub-divertor, the Knudsen number, which characterizes the collisionality of the flow, velocity profiles, pressure and temperature distributions. - Abstract: In this work, the exhausted neutral gas flow is modeled for two cases of a simplified JT-60SA sub-divertor geometry and compared via three different approaches, namely (i) a collisionless approach based on the ProVac3D code, (ii) the DSMC approach based on the DIVGAS code that can be run with and without consideration of particle collisions, and (iii) the NEUT2D approach which has been extensively used in the past for the JT-60 design. In a first case study, the transmission probability was calculated by the 3 approaches and very good agreement is found between NEUT2D-ProVac3D whereas discrepancies between DIVGAS and NEUT2D are found and further analyzed. In the second case, the assessment of collisions is done by means of DIVGAS. Simulations showed that the flow is found in the transitional regime with Kn numbers between 0.1 and 0.4. The DIVGAS collisionless case yielded lower values of temperature than the collisional one by factors of 0.5–0.8 in

Review of ICRF antenna development and heating experiments up to advanced experiment I, 1989 on the JT-60 tokamak

International Nuclear Information System (INIS)

Fujii, Tsuneyuki

1992-03-01

Two main subjects of ion cyclotron range of frequencies (ICRF) heating on JT-60 are described in this paper from development phase of the JT-60 ICRF heating system up to advanced experiment I, 1989. One is antenna design and development for the high power JT-60 ICRF heating system (6 MW for 10 s at a frequency range of 108 - 132 MHz). The other is the experimental investigation of characteristics of second harmonic ICRF heating in a large tokamak. (J.P.N.)

Progress of JT-60SA Project: EU-JA joint efforts for assembly and fabrication of superconducting tokamak facilities and its research planning

Energy Technology Data Exchange (ETDEWEB)

Shirai, Hiroshi, E-mail: shirai.hiroshi@jaea.go.jp [JT-60SA Project Team, Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Barabaschi, Pietro [JT-60SA EU-Home Team, Fusion for Energy, Boltsmannstr 2, Garching 85748 (Germany); Kamada, Yutaka [JT-60SA JA-Home Team, Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

2016-11-01

Highlights: • JT-60SA Project is promoted under the BA Agreement and JA national programme. • JT-60SA is designed to operate in break-even equivalent condition for a long period. • JT-60SA Project supports and complements the ITER project, and promotes DEMO design. • Fabrication of JT-60SA components and assembly in Naka are steadily going on. • JT-60SA Research Plan has been developed jointly by EU and JA fusion communities. - Abstract: Aiming at supporting the early realization of fusion energy, the JT-60SA Project has shown steady progress for several years toward the first plasma in 2019 under the dual frameworks: the Satellite Tokamak Programme of the Broader Approach Agreement between EU and Japan, and the Japanese national programme. JT-60SA is a superconducting tokamak designed to operate in break-even equivalent conditions for a long pulse duration (typically 100 s) with a maximum plasma current of 5.5 MA. A variety of plasma control capabilities enable JT-60SA to contribute directly to the ITER project and also to DEMO by addressing key engineering and physics issues for advanced plasma operation. Design and fabrication of JT-60SA components, shared by the EU and Japan, started in 2007. Assembly in the torus hall started in January 2013, and welding work of the vacuum vessel sectors (seven 40° sectors and two 30° sectors) is currently ongoing on the cryostat base. Other components such as TF coils, PF coils, power supplies, cryogenic system, cryostat vessel, thermal shields and so on were or are being delivered to the Naka site for installation, assembly and commissioning. This paper gives technical progress on fabrication, installation and assembly of tokamak components and ancillary systems, as well as progress of the JT-60SA Research Plan being developed jointly by European and Japanese fusion communities.

Kunsti tõmbavad vaatama p-tähed : uus näitus lastekunstikooli galeriis / Raimu Hanson

Index Scriptorium Estoniae

Hanson, Raimu, 1957-

2008-01-01

Näitus "P... ja p... kunst" Tartu Lastekunstikooli galeriis, kuraator Margus Kiis. Oma töid eksponeerivad Rauno Thomas Moss, Enn Tegova, Maris Palgi, Jane Remm, Kristiina Viin, Martin Vaher, Kaspar Jassa, Mariliin Kindsiko jt.

Design study of an AC power supply system in JT-60SA

International Nuclear Information System (INIS)

Shimada, Katsuhiro; Baulaigue, Olivier; Cara, Philippe; Coletti, Alberto; Coletti, Roberto; Matsukawa, Makoto; Terakado, Tsunehisa; Yamauchi, Kunihito

2011-01-01

In the initial research phase of JT-60SA, which is the International Thermonuclear Experimental Reactor (ITER) satellite Tokamak with superconducting toroidal and poloidal magnetic field coils, the plasma heating operation of 30 MW-60 s or 20 MW-100 s is planned for 5.5 MA single null divertor plasmas. To achieve this operation, AC power source of the medium voltage of 18 kV and ∼7 GJ has to be provided in total to the poloidal field coil power supplies and additional heating devices such as neutral beam injection (NBI) and electron cyclotron radio frequency (ECRF). In this paper, the proposed AC power supply system in JT-60SA was estimated from the view point of available power, and harmonic currents based on the standard plasma operation scenario during the initial research phase. This AC power supply system consists of the reused JT-60 power supply facilities including motor generators with flywheel, AC breakers, harmonic filters, etc., to make it cost effective. In addition, the conceptual design of the upgraded AC power supply system for the ultimate heating power of 41 MW-100 s in the extended research phase is also described.

Ion beam dump for JT-60 NBI

International Nuclear Information System (INIS)

Kuriyama, Masaaki; Horiike, Hiroshi; Matsuda, Shinzaburo; Morita, Hiroaki; Shibanuma, Kiyoshi

1981-10-01

The design of the active cooling type ion beam dump for JT-60 NBI which receives the total beam power of 5.6 MW for 10 sec continuously is described. It is composed of array of many finned tubes which is made of oxygen free copper with 0.2% silver content. The safety margin against thermal and mechanical troubles is estimated by the heat transfer and the thermal stress calculation. (author)

Spaces of Modernism: Ljubica Marić in Context

Czech Academy of Sciences Publication Activity Database

Bajgarová, Jitka

2010-01-01

Roč. 47, č. 1 (2010), s. 109-111 ISSN 0018-7003. [Spaces of Modernism: Ljubica Marić in Context. Beograd, 05.11.2009-07.11.2009] Institutional research plan: CEZ:AV0Z90580513 Keywords : Ljubica Marić * Serbian composer Subject RIV: AL - Art, Architecture, Cultural Heritage

Retention characteristics of hydrogen isotopes in JT-60U

International Nuclear Information System (INIS)

Masaki, K.; Sugiyama, K.; Hayashi, T.; Ochiai, K.; Gotoh, Y.; Shibahara, T.; Hirohata, Y.; Oya, Y.; Miya, N.; Tanabe, T.

2005-01-01

Erosion/deposition distribution and hydrogen isotope behavior in the JT-60U plasma-facing wall were investigated. Distribution of the tritium, which was produced by D-D nuclear reaction, was not correlated with erosion/deposition distribution. The tritium distribution can be explained by the distribution of high-energy tritium ion-implantation due to ripple loss. Deuterium distribution in the divertor region was different from the tritium distribution and not well correlated with the deposition. The highest D/C was ∼0.05 at the bottom of the outer dome wing, which is much less than that observed in other tokamaks. For the deuterium retention, at least two retention processes (ion-implantation and co-deposition) were found on the dome region. The systematic dust collection gave the small amount of dust (∼7 g: 0.2 mg/s production) in the whole vessel of JT-60U. Deposition was observed at the remote area of the outer divertor region

Characteristics of large scale ionic source for JT-60

Energy Technology Data Exchange (ETDEWEB)

Fujiwara, Yukio; Honda, Atsushi; Inoue, Takashi [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment] [and others

1997-02-01

The Neutral Beam Injection (NBI) apparatus is expected for important role sharing apparatus to realize the plasma electric current drive and the plasma control in not only temperature upgrading of the plasma but also Tokamak nuclear fusion reactor for the next generation such as JT-60, ITER and so forth. Japan Atomic Energy Research Institute has developed the ionic source with high energy and large electric current for about 10 years. Some arrangement tests of the large negative ion source for JT-60 No. 1 were executed from June to October, 1995. As a series of arrangement tests, 400 KeV and 13.5 A of deuterium negative ion beam was successfully accelerated for 0.12 sec. under 0.22 Pa of low gas pressure. And, it was elucidated that electron electric current could be controlled efficiently even in deuterium negative ion beam. Here is described on the testing results in details. (G.K.)

Review of JT-60U experimental results from February to October, 1995

International Nuclear Information System (INIS)

1996-03-01

Renewed theme group organization started from October 1994 for the upcoming experiments in JT-60U. This regime has three theme groups each of which is composed of two sub-theme groups as; (1) Plasma Operation Theme (Leader Y. Neyatani) with Operation Sub-Theme and Disruption Sub-Theme, (2) High Performance (Leader S. Ishida) with Confinement and MHD Sub-Theme and High Energy Particle Sub-Theme and (3) Steady State Theme (Leader A. Sakasai) with Current Drive Sub-Theme and Divertor Sub-Theme. The main results from the JT-60U experiments in 1995 are summarized in the overviews of the three theme group activities. (J.P.N.)

Review of JT-60U experimental results from February to October, 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Renewed theme group organization started from October 1994 for the upcoming experiments in JT-60U. This regime has three theme groups each of which is composed of two sub-theme groups as; (1) Plasma Operation Theme (Leader Y. Neyatani) with Operation Sub-Theme and Disruption Sub-Theme, (2) High Performance (Leader S. Ishida) with Confinement and MHD Sub-Theme and High Energy Particle Sub-Theme and (3) Steady State Theme (Leader A. Sakasai) with Current Drive Sub-Theme and Divertor Sub-Theme. The main results from the JT-60U experiments in 1995 are summarized in the overviews of the three theme group activities. (J.P.N.).

Plasma equilibrium response modelling and validation on JT-60U

International Nuclear Information System (INIS)

Lister, J.B.; Sharma, A.; Limebeer, D.J.N.; Wainwright, J.P.; Nakamura, Y.; Yoshino, R.

2002-01-01

A systematic procedure to identify the plasma equilibrium response to the poloidal field coil voltages has been applied to the JT-60U tokamak. The required response was predicted with a high accuracy by a state-space model derived from first principles. The ab initio derivation of linearized plasma equilibrium response models is re-examined using an approach standard in analytical mechanics. A symmetric formulation is naturally obtained, removing a previous weakness in such models. RZIP, a rigid current distribution model, is re-derived using this approach and is compared with the new experimental plasma equilibrium response data obtained from Ohmic and neutral beam injection discharges in the JT-60U tokamak. In order to remove any bias from the comparison between modelled and measured plasma responses, the electromagnetic response model without plasma was first carefully tuned against experimental data, using a parametric approach, for which different cost functions for quantifying model agreement were explored. This approach additionally provides new indications of the accuracy to which various plasma parameters are known, and to the ordering of physical effects. Having taken these precautions when tuning the plasmaless model, an empirical estimate of the plasma self-inductance, the plasma resistance and its radial derivative could be established and compared with initial assumptions. Off-line tuning of the JT-60U controller is presented as an example of the improvements which might be obtained by using such a model of the plasma equilibrium response. (author)

Progress of data processing system in JT-60 utilizing the UNIX-based workstations

International Nuclear Information System (INIS)

Sakata, Shinya; Kiyono, Kimihiro; Oshima, Takayuki; Sato, Minoru; Ozeki, Takahisa

2007-07-01

JT-60 data processing system (DPS) possesses three-level hierarchy. At the top level of hierarchy is JT-60 inter-shot processor (MSP-ISP), which is a mainframe computer, provides communication with the JT-60 supervisory control system and supervises the internal communication inside the DPS. The middle level of hierarchy has minicomputers and the bottom level of hierarchy has individual diagnostic subsystems, which consist of the CAMAC and VME modules. To meet the demand for advanced diagnostics, the DPS has been progressed in stages from a three-level hierarchy system, which was dependent on the processing power of the MSP-ISP, to a two-level hierarchy system, which is decentralized data processing system (New-DPS) by utilizing the UNIX-based workstations and network technology. This replacement had been accomplished, and the New-DPS has been started to operate in October 2005. In this report, we describe the development and improvement of the New-DPS, whose functions were decentralized from the MSP-ISP to the UNIX-based workstations. (author)

JT-60 negative ion beam NBI apparatus. Present state of its construction and initial experimental results

Energy Technology Data Exchange (ETDEWEB)

Kuriyama, Masaaki [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

1997-02-01

The NBI (Neutral Beam Injection) apparatus used for negative ion at first in the world, has an aim to actually prove heating and electric current drive with high density plasma at the JT-60 and to constitute physical and technical bases for selection and design of heating apparatus of ITER (International Thermal Nuclear Fusion Experimental Reactor). Construction of 500 KeV negative ion NBI apparatus for the JT-60 started to operate on 1993 was completed at March, 1996. On the way, at a preliminary test on forming and acceleration of the negative ion beam using a portion of this apparatus, 400 KeV and 13.5 A/D of the highest deuterium negative ion beam acceleration in the world was obtained successfully, which gave a bright forecasting of the plasma heating and electric current drive experiment using the negative ion NBI apparatus. After March, 1996, some plans to begin beam incident experiment at the JT-60 using the negative ion NBI apparatus and to execute the heating and electric current drive experiment at the JT-60 under intending increase of beam output are progressed. (G.K.)

Koomiksid näitusel ja seminaril

Index Scriptorium Estoniae

2005-01-01

Tartus Tampere majas on väljas näitus Soome koomiksikunstnike Kati Kovacsi (sünd. 1963) ja Timo Mäkelä (1951) loomingust. Tartu Kunstikoolis toimub koomiksiseminar, kus loengutega esinevad Mari Laaniste, Joonas Sildre jt.

Density limit in JT-60

International Nuclear Information System (INIS)

Kamada, Yutaka; Hosogane, Nobuyuki; Hirayama, Toshio; Tsunematsu, Toshihide

1990-05-01

This report studies mainly the density limit for a series of gas- and pellet-fuelled limiter discharges in JT-60. With the pellet injection into high-current/low-q (q(a)=2.3∼2.5) discharges, the Murakami factor reaches up to 10∼13 x 10 19 m -2 T -1 . The values are about factors of 1.5∼2.0 higher than those for usual gas-fuelled discharges. The pellet injected discharges have high central density, whereas the electron density in the outer region (a/2 abs and n e 2 (r=50 cm) x Z eff (r=50 cm). (author)

JT-60 database system, 1

International Nuclear Information System (INIS)

Kurihara, Kenichi; Kimura, Toyoaki; Itoh, Yasuhiro.

1987-07-01

Naturally, sufficient software circumstance makes it possible to analyse the discharge result data effectively. JT-60 discharge result data, collected by the supervisor, are transferred to the general purpose computer through the new linkage channel, and are converted to ''database''. Datafile in the database was designed to be surrounded by various interfaces. This structure is able to preserve the datafile reliability and does not expect the user's information about the datafile structure. In addition, the support system for graphic processing was developed so that the user may easily obtain the figures with some calculations. This paper reports on the basic concept and system design. (author)

Web-based Java application to advanced JT-60 Man-Machine Interfacing System for remote experiments

International Nuclear Information System (INIS)

Totsuka, Toshiyuki; Suzuki, Yoshio; Sakata, Shinya; Oshima, Takayuki; Iba, Katsuyuki

2008-01-01

Since remote participation in ITER experiments is planned, it is expected to demonstrate that the JT-60SA experiment is controlled from a Japanese remote experiment center located in Rokkasho-mura, Aomori-ken, Japan as a part of the ITER-BA project. Functions required for this experiment are monitoring of the discharge sequence status, handling of the discharge parameter, checking of experiment data, and monitoring of plant data, all of which are included in the existing JT-60 Man-Machine Interfacing System (MMIF). The MMIF is now only available to on-site users at the Naka site due to network safety. The motivation for remote MMIF is prompted by the issue of developing and achieving compatibility with network safety. The Java language has been chosen to implement this task. This paper deals with details of the JT-60 MMIF for the remote experiment that has evolved using the Java language

Uued aiaraamatud / Jaan Mettik

Index Scriptorium Estoniae

Mettik, Jaan

2005-01-01

2005. a. Tallinnas kirjastuselt "Varrak" ilmunud Mari Laane koostatud "Iluaianduse käsiraamatust" ja Clare Matthews'i raamatust "Rõdu- ja terrassililled", kirjastuselt "Tänapäev" ilmunud Ingrid Olaussoni raamatust "Hooldame aeda lihtsalt ja looduspäraselt" jt

High performance experiments in JT-60U reversed shear discharges

International Nuclear Information System (INIS)

Fujita, T.; Kamada, Y.; Ishida, S.

2001-01-01

The operation of JT-60U reversed shear discharges has been extended to a high plasma current, low-q regime keeping a large radius of the internal transport barrier (ITB) and the record value of equivalent fusion multiplication factor in JT-60U, Q DT eq =1.25, has been achieved at 2.6 MA. Operational schemes to reach the low-q regime with good reproducibility have been developed. The reduction of Z eff was obtained in the newly installed W-shaped pumped divertor. The beta limit in the low-q min regime, which limited the performance of L-mode edge discharges, has been improved in H-mode edge discharges with a broader pressure profile, which was obtained by power flow control with ITB degradation. Sustainment of ITB and improved confinement for 5.5 seconds has been demonstrated in an ELMy H reversed shear discharge. (author)

Absolute calibration of the neutron yield measurement on JT-60 Upgrade

International Nuclear Information System (INIS)

Nishitani, Takeo; Takeuchi, Hiroshi; Barnes, C.W.

1991-10-01

Absolutely calibrated measurements of the neutron yield are important for the evaluation of the plasma performance such as the fusion gain Q in DD operating tokamaks. Total neutron yield is measured with 235 U and 238 U fission chambers and 3 He proportional counters in JT-60 Upgrade. The in situ calibration was performed by moving the 252 Cf neutron source toroidally through the JT-60 vacuum vessel. Detection efficiencies of three 235 U and two 3 He detectors were measured for 92 locations of the neutron point source in toroidal scans at two different major radii. The total detection efficiency for the torus neutron source was obtained by averaging the point efficiencies over the whole toroidal angle. The uncertainty of the resulting absolute plasma neutron source calibration is estimated to be ± 10%. (author)

Manufacturing of central control system of 'JT-60' a plasma feasibility experiment device

International Nuclear Information System (INIS)

Kondo, Ikuo; Kimura, Toyoaki; Murai, Katsuji; Iba, Daizo; Takemaru, Koichi.

1984-01-01

For constructing a critical-plasma-experiment apparatus JT-60, it was necessary to develop a new control system which enables to operate safely and smoothly a large scale nuclear fusion apparatus and to carry out efficient experiment. For the purpose, the total system control facility composed of such controllers as CAMAC system, timing system and protective interlock panel with multi-computer system as the core was developed. This system generalizes, keeps watch on and controls the total facilities as the key point of the control system of JT-60, and allows flexible operation control corresponding to the diversified experimental projects. At the same time, it carries out the fast real-time control of high temperature, high density plasma. In this paper, the system constitution, function and the main contents of development of the total system control facility are reported. JT-60 is constructed to attain the critical plasma condition as the premise of nuclear fusion reactors and to scientifically verify controlled nuclear fusion. Plasma expe riment will be started in April, 1985. The real-time control of plasma for carrying out high beta operation is planned, intending to develop future economical practical reactors. (Kako, I.)

The design study of the JT-60SU device. No.8. Nuclear shielding and safety design

Energy Technology Data Exchange (ETDEWEB)

Miya, Naoyuki; Kikuchi, Mitsuru; Ushigusa, Kenkichi [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment] [and others

1998-03-01

Results of nuclear shielding design study and safety analysis for the steady-state tokamak device JT-60SU are described. D-T operation (option) for two years is adopted in addition to ten years operation using deuterium. Design work has been done in accordance with general laws for radioisotopes handling in Japan as a guideline of safety evaluation, which is applied to the operation of present JT-60U device. Optimization of the shielding design for the device structure including vacuum vessel has been presented to meet with allowable limits of biological shielding determined in advance. It is shown that JT-60SU can be operated safely in the present JT-60 experimental building. It is planed to use 100g/year of tritium in D-T operation phase. A concept of multiple -barrier system is applied to the facility design to prevent propagation of tritium, in which the torus hall and the tritium removal room provide the tertiary confinement. From the design of atmosphere detritiation system for accidental tritium release, it is shown that tritium concentration level can be reduced to the allowable level after two weeks with reasonable compact size components. Safety assessment related to activation of coolant/air, and atmospheric tritium effluents are discussed. (author)

Analyses of plasma parameter profiles in JT-60U

Energy Technology Data Exchange (ETDEWEB)

Shirai, Hiroshi; Shimizu, Katsuhiro; Hayashi, Nobuhiko [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Itakura, Hirofumi; Takase, Keizou [CSK Co. Ltd., Tokyo (Japan)

2001-01-01

The methods how diagnostics data are treated as the surface quantity of magnetic surface and processed to the profile data in the JT-60U plasmas are summarized. The MHD equilibrium obtained by solving Grad-Shafranov equation on the MHD equilibrium calculation and registration software FBEQU are saved shot by shot as a database. Various experimental plasma data measured at various geometrical positions on JT-60 are mapped onto the MHD equilibrium and treated as functions of the volume averaged minor radius {rho} on the experimental data time slice monitoring software SLICE. Experimental data are integrated and edited on SLICE. The experimental data measured as the line integral values are transformed by Able inversion. The mapped data are fitted to a functional form and saved to the profile database MAP-DB. SLICE can also read data from MAP-DB and redisplay and transform them. In addition, SLICE can generate the profile data TOKRD as run data for orbit following Monte-Carlo (OFMC) code, analyzer for current drive consistent with MHD equilibrium (ACCOME) code and tokamak predictive and interpretive code system (TOPICS). (author)

Analyses of plasma parameter profiles in JT-60U

International Nuclear Information System (INIS)

Shirai, Hiroshi; Shimizu, Katsuhiro; Hayashi, Nobuhiko

2001-01-01

The methods how diagnostics data are treated as the surface quantity of magnetic surface and processed to the profile data in the JT-60U plasmas are summarized. The MHD equilibrium obtained by solving Grad-Shafranov equation on the MHD equilibrium calculation and registration software FBEQU are saved shot by shot as a database. Various experimental plasma data measured at various geometrical positions on JT-60 are mapped onto the MHD equilibrium and treated as functions of the volume averaged minor radius ρ on the experimental data time slice monitoring software SLICE. Experimental data are integrated and edited on SLICE. The experimental data measured as the line integral values are transformed by Able inversion. The mapped data are fitted to a functional form and saved to the profile database MAP-DB. SLICE can also read data from MAP-DB and redisplay and transform them. In addition, SLICE can generate the profile data TOKRD as run data for orbit following Monte-Carlo (OFMC) code, analyzer for current drive consistent with MHD equilibrium (ACCOME) code and tokamak predictive and interpretive code system (TOPICS). (author)

Avangardistid Moskvas / Mari Sobolev

Index Scriptorium Estoniae

Sobolev, Mari, 1968-

2000-01-01

Valdek Alberi ja Taave Tuutma videoinstallatsioonist "Think different" näitusel "Salon 2000" Moskva Kunstnike Keskmajas 16.-26. III. Kuraator Mari Sobolev. Eesti väljapaneku vastukajast ja Jüri Arrakust, kelle maalid olid näitusel "Balti meistrid", ajalehes "Kommersant". Moskva kunstinäitustest.

Development of a new discharge control system utilizing UNIX workstations and VME-bus systems for JT-60

Energy Technology Data Exchange (ETDEWEB)

Akasaka, Hiromi; Sueoka, Michiharu; Takano, Shoji; Totsuka, Toshiyuki; Yonekawa, Izuru; Kurihara, Kenichi; Kimura, Toyoaki [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

2002-01-01

The JT-60 discharge control system, which had used HIDIC-80E 16 bit mini-computers and CAMAC systems since the start of JT-60 experiment in 1985, was renewed in March, 2001. The new system consists of a UNIX workstation and a VME-bus system, and features a distributed control system. The workstation performs message communication with a VME-bus system and controllers of JT-60 sub-systems and processing for discharge control because of its flexibility to construction of a new network and modifications of software. The VME-bus system performs discharge sequence control because it is suitable for fast real time control and flexible to the hardware extension. The replacement has improved the control function and reliability of the discharge control system and also has provided sufficient performance necessary for future modifications of JT-60. The new system has been running successfully since April 2001. The data acquisition speed was confirmed to be twice faster than the previous one. This report describes major functions of the discharge control system, technical ideas for developing the system and results of the initial operation in detail. (author)

[Marie Heiberg. Üks naine kurbade silmadega] / Marko Mägi

Index Scriptorium Estoniae

Mägi, Marko

2010-01-01

Arvustus: Heiberg, Marie. Üks naine kurbade silmadega : Eesti luuletaja Marie Heibergi õnne ja valu, rõõmu ja mure lugu kirjades / [koostajad Iivi Lepik, Kirsten Simmo]. Tallinn : Eesti Teatri- ja Muusikamuuseum : SE & JS, 2010

Weight Estimate and Centers of Gravity for JT-11 Nuclear Conversion Study

International Nuclear Information System (INIS)

Manning, R. W.

1958-01-01

Weight estimates and centers of gravity for the JT-11 nuclear conversion study are tabulated. Included in the radiator section are: diffuser, shrouds, supports, radiator, liquid metal, shafting and casing.

Effects of pressure profile and plasma shaping on the n=1 internal kink mode in JT-60/JT-60U pellet fuelled plasmas

International Nuclear Information System (INIS)

Ozeki, Takahisa; Azumi, Masafumi

1990-10-01

The stability of the n=1 internal kink mode in a tokamak is numerically analyzed for plasmas with a centrally peaked pressure profile. These studies are carried out with the strongly peaked pressure inside the q=1 surface, which is based on the experimentally observed plasmas by means of injections of hydrogen-ice pellets in JT-60 tokamak. The effects of peaked pressure and shaping, i.e., elongation and triangularity, are also studied for JT-60U tokamak. The plasma with the strongly peaked pressure profile has higher critical value of poloidal beta defined within the q=1 surface than that with a parabolic pressure profile. Though the beta limit reduces with the increase of the elongation, the plasma with the peaked pressure profile has larger improvement due to the triangularity than that with the parabolic pressure profile. To access the second stability of the n=1 internal kink mode, the plasma with a flat pressure profile and the large minor radius of the q=1 surface is effective. (author)

Optical design for divertor Thomson scattering system for JT-60SA

International Nuclear Information System (INIS)

Kajita, Shin; Enokuchi, Akito; Hatae, Takaki; Itami, Kiyoshi; Hamano, Takashi; Kado, Shinichiro; Ohno, Noriyasu; Takeyama, Norihide

2014-01-01

Highlights: •A detailed designing for collection optical system of divertor Thomson scattering system in JT-60SA is conducted. •The assessment of the density and temperature errors of the measurement system is conducted. •It is shown that the measurement could be done with the temperature error of 50% when the density was 10 20 m −3 . •The availability of the laser transmission mirrors for the measurement system is discussed. •Several guidelines to improve the measurement system are discussed. -- Abstract: Optical design for divertor Thomson scattering system in JT-60SA has been conducted. The measurement system will use a Nd:YAG laser at 1064 nm, and scattered photons are collected by a collection optical system. The collection optics consists of primary mirror, secondary mirror, relay optics, and fiber collection optics. The laser transmission mirror and collection optics were designed to be installed in a slender lower port of JT-60SA. The assessment of the measurement errors in temperature was conducted for the designed collection optical system. Because of spatial limitation, the solid angle from the measurement points would be small especially for the measurement points in high field side, and consequently, the temperature errors in the high field side would be considerably large. The effects of several improvements on the error are discussed. Moreover, an assessment for the in-vessel laser transmission metallic mirrors is conducted for the present design

Vacuum pumping system for the JT-60 radio-frequency heating system

International Nuclear Information System (INIS)

Yokokura, Kenji; Ikeda, Yoshitaka; Imai, Tuyoshi; Suganuma, Kazuaki; Nagashima, Takashi

1988-01-01

The basic design requirements set up for the JT-60 radio-frequency heating system included: (1) rapid pumping of gas released upon application of a radio-frequency power to maintain the pressure in the launchers at 10 -2 - 10 -3 Pa or less, (2) incorporation of a gas analysis system that can operate under a strong field and high pressure (>10 -2 Pa) to permit remote controlled data collection and processing, and (3) low cost, multiple functions and high reliability. The vacuum pumping system, consisting of three units for low hybrid radio-frequency (LHRF) and one unit for ion cyclotron radio-frequency (ICRF), is connected to each launcher provided at the four ports of JT-60. The LHRF unit is composed of a main pump, an alumina joint for electrical insulation from the launcher, a metallic gate valve for isolation from the JT-60 vacuum region, and various vacuum gauges. Only a turbo-molecular pump is used for the ICRF system because a large-scale differential pumping is not required. A gas measuring system is incorporated which consists of a mass filter, personal computer, turbo-molecular pump, and variable flow valve equipped with an APG control. This system is designed to identify and make use of gas impurities released during the launcher aging process. The control system employed consists of a personal computer, interlock control board, data logger and other devices such as vacuum gages. (Nogami, K.)

Development of TiC coated wall materials for JT-60

International Nuclear Information System (INIS)

Abe, T.; Murakami, Y.; Obara, K.; Hiroki, S.; Nakamura, K.; Inagawa, K.

1985-01-01

Development of titanium carbide (TiC, 20 μm thick) coated wall materials has been carried out for JT-60. Application of TiC coatings onto molybdenum and Inconel 625 substrates requires a deposition temperature below 950 0 C and 600 0 C respectively, because recrystallization of molybdenum and age hardening of Inconel 625 occur above these temperatures. Through this process of coating we develop a new type plasma CVD(TP-CVD method) for molybdenum and a new type PVD(HCD-ARE method) for Inconel 625 which could successfully reduce the deposition temperature to 900 0 C and 500 0 C, respectively. The TiC coated wall samples were characterized by AES, ESCA, X-ray diffractometer, EPMA, SEM, metalography, tensile tests, thermal shock tests, and other techniques. As a result of the above measurements, it was demonstrated that the characteristics of those TiC coated walls satisfy the requirements arising from JT-60 operation conditions. (orig.)

Marie and Pierre Curie. Life in extremes

International Nuclear Information System (INIS)

Roethlein, Brigitte

2008-01-01

In Paris in 1894, two young physicists fall in love: Marie Sklodowska and Pierre Curie. They get married and make great contributions to science, research radioactivity and discover new chemical elements. The marriage of Marie and Pierre Curie is quite modern: They work together as equals, share their thoughts and pursue their plans together as partners. They share an absolute interest in science, a love of nature, and a sceptic attitude towards the sophisticated society of the Belle Epoque. They are together 24 hours a day with hardly ever any disagreement. Whenever one of them is ill - which is quite often because of the high level of radioactivity in their laboratory -, the other will nurse him or her. After only twelve years of mutual love, Pierre Curie dies. Marie raises their two daughters on her own and continues her research. In 1911, she will be the first scientist that ever gets a second Nobel Prize. (orig.) [de

Experimental Physical Sciences Vistas: MaRIE (draft)

Energy Technology Data Exchange (ETDEWEB)

Shlachter, Jack [Los Alamos National Laboratory

2010-09-08

To achieve breakthrough scientific discoveries in the 21st century, a convergence and integration of world-leading experimental facilities and capabilities with theory, modeling, and simulation is necessary. In this issue of Experimental Physical Sciences Vistas, I am excited to present our plans for Los Alamos National Laboratory's future flagship experimental facility, MaRIE (Matter-Radiation Interactions in Extremes). MaRIE is a facility that will provide transformational understanding of matter in extreme conditions required to reduce or resolve key weapons performance uncertainties, develop the materials needed for advanced energy systems, and transform our ability to create materials by design. Our unique role in materials science starting with the Manhattan Project has positioned us well to develop a contemporary materials strategy pushing the frontiers of controlled functionality - the design and tailoring of a material for the unique demands of a specific application. Controlled functionality requires improvement in understanding of the structure and properties of materials in order to synthesize and process materials with unique characteristics. In the nuclear weapons program today, improving data and models to increase confidence in the stockpile can take years from concept to new knowledge. Our goal with MaRIE is to accelerate this process by enhancing predictive capability - the ability to compute a priori the observables of an experiment or test and pertinent confidence intervals using verified and validated simulation tools. It is a science-based approach that includes the use of advanced experimental tools, theoretical models, and multi-physics codes, simultaneously dealing with multiple aspects of physical operation of a system that are needed to develop an increasingly mature predictive capability. This same approach is needed to accelerate improvements to other systems such as nuclear reactors. MaRIE will be valuable to many national

Marie and Irene Curie. The first female Nobel Prize winners; Marie en IreneCurie. De eerste vrouwelijke Nobelprijswinnaars

Energy Technology Data Exchange (ETDEWEB)

Noordenbos, G. [Joke Smit Instituut voor Vrouwenstudies, Universiteit Leiden, Leiden (Netherlands)

2003-07-01

Marie Curie was awarded the Nobel Prize in 1903 and in 1911. Also her daughter, Irene Joliot-Curie, received a Nobel Prize for science in 1935. In this book an overview is given of the academic world at that time: limited access to universities for women, the carriers of both women in physics and their pioneering research and discoveries, the refusal of Marie Curie by the French Academy of Sciences, the awarding of the Nobel Prize and the assignment of Irene Joliot-Curie as the first female minister in France, the impact of the two World Wars, their married and private lives and the constant smear campaign of the press against both women. The lives and works of both women are hold against the light of the present position of women in physical sciences. [Dutch] In 1903, precies honderd jaar geleden, ontving Marie Curie als eerste vrouw de Nobelprijs voor de Wetenschap, gevolgd door een tweede Nobelprijs in 1911. Ook haar dochter Irene Joliot-Curie kreeg de Nobelprijs voor de wetenschap in 1935. Marie and Irene Curie schetst een breed beeld van de academische wereld waarin beide vrouwen zich bewogen: de beperkte toegang van vrouwen tot de universiteit, hun carrisres in de natuurkunde en baanbrekende ontdekkingen, de afwijzing van Marie door de Franse Academie des Sciences, de toekenning van de Nobelprijs en de benoeming van Irene als eerste vrouwelijke minister in Frankrijk, de invloed van de twee Wereldoorlogen, hun huwelijks- en priveleven en de niet aflatende hetze van de pers tegen beiden. In de door mannen gedomineerde wereld van de natuurwetenschappen liep de uitzonderingspositie van beide vrouwen als rode draad door hun curieuze levens. Het leven en werk van de Curies wordt geactualiseerd door deze tegen het licht te houden van de huidige positie van vrouwen in de natuurwetenschappen. Het bereiken van de top van de wetenschap door vrouwen blijkt nog steeds uitzonderlijk.

The H-mode pedestal, ELMs and TF ripple effects in JT-60U/JET dimensionless identity experiments

International Nuclear Information System (INIS)

Saibene, G.; Oyama, N.; Loennroth, J.; Andrew, Y.; Luna, E. de la; Giroud, C.; Huysmans, G.T.A.; Kamada, Y.; Kempenaars, M.A.H.; Loarte, A.; Donald, D. Mc; Nave, M.M.F.; Meiggs, A.; Parail, V.; Sartori, R.; Sharapov, S.; Stober, J.; Suzuki, T.; Takechi, M.; Toi, K.; Urano, H.

2007-01-01

This paper summarizes results of dimensionless identity experiments in JT-60U and JET, aimed at the comparison of the H-mode pedestal and ELM behaviour in the two devices. Given their similar size, dimensionless matched plasmas are also similar in their dimensional parameters (in particular, the plasma minor radius a is the same in JET and JT-60U). Power and density scans were carried out at two values of I p , providing a q scan (q 95 = 3.1 and 5.1) with fixed (and matched) toroidal field. Contrary to initial expectations, a dimensionless match between the two devices was quite difficult to achieve. In general, p ped in JT-60U is lower than in JET and, at low q, the pedestal pressure of JT-60U with a Type I ELMy edge is matched in JET only in the Type III ELM regime. At q 95 = 5.1, a dimensionless match in ρ*, ν* and β p,ped is obtained with Type I ELMs, but only with low power JET H-modes. These results motivated a closer investigation of experimental conditions in the two devices, to identify possible 'hidden' physics that prevents obtaining a good match of pedestal values over a large range of plasmas parameters. Ripple-induced ion losses of the medium bore plasma used in JT-60U for the similarity experiments are identified as the main difference with JET. The magnitude of the JT-60U ripple losses is sufficient to induce counter-toroidal rotation in co-injected plasma. The influence of ripple losses was demonstrated at q 95 = 5.1: reducing ripple losses by ∼2 (from 4.3 to 1.9 MW) by replacing positive with negative neutral beam injection at approximately constant P in resulted in an increased p ped in JT-60U, providing a good match to full power JET H-modes. At the same time, the counter-toroidal rotation decreased. Physics mechanisms relating ripple losses to pedestal performance are not yet identified, and the possible role of velocity shear in the pedestal stability, as well as the possible influence of ripple on thermal ion transport are briefly

Diagnostic planning in JT-60 project

International Nuclear Information System (INIS)

Matoba, Tohru; Suzuki, Yasuo; Funahashi, Akimasa; Itagaki, Tokiyoshi

1977-08-01

The diagnostic plans of JT-60 were made along with design of the main machine. Basic requirements of the diagnostic program are (1) multiple measurement of respective plasma parameters, (2) efficient usage of the discharge, (3) capable data acquisition system, (4) high reliability of the diagnostic equipments, and (5) systematic development of new diagnostic techniques. Dimensions of the diagnostic ports were determined in detailed design of the vacuum vessel, anticipating the possible diagnostic methods. The proposed diagnostic systems and the plans are shown in table and figures respectively. Problems in the diagnostics are also described. (auth.)

Mary as Mother in the Flores de Mayo in Poblacion, Oslob

Directory of Open Access Journals (Sweden)

Patricia Marion Y. Lopez

2016-06-01

Full Text Available The paper reflects on the meanings of the Flores de Mayo ritual as performed in a town on the southeastern coast of Cebu through the examination of Mary as a “semantically open” symbol. The essay illustrates how ideas about Mary are constructed through the discourse of the Church and are in turn, reinforced through a Church-instituted and regulated ritual. An analysis of selected elements of the ritual however, reveals that the symbol of Mary has the potential to hold “other” kinds of meanings that slip in between “official” and “unofficial” discourses, highlighting how Mary continues to be a negotiated field between church authorities and the popular faithful.

Special Workshop of Marie Curie Fellows on Research and Training in Physics and Technology

CERN Multimedia

Patrice Loiez

2002-01-01

Photo 0210006_07a: Prof. L. Maiani, Director General of CERN. Addressing the Marie Curie Worshop held at CERN 3-4 October 2002. Title of this talk:"Function of Large-scale Facilities and Centres of Excellence". Photo 0210006_14a: Prof. L. Maiani, Director General of CERN. Addressing the Marie Curie Worshop held at CERN 3-4 October 2002. Title of this talk:"Function of Large-scale Facilities and Centres of Excellence". Photo 0210006_22: Dr. David Plane (CERN) introducing Dr. Theodore Papazoglou from the European Commission. Addressing the Marie Curie Worshop held at CERN 3-4 October 2002. Title of this talk:"Marie Curie Fellowships in the 6th Framework Programme". Photo 0210006_28a: Dr. Nora Brambilla, Vice-President of Marie Curie Fellow Association, INFN and Dept. of Physics, University of Milan. Addressing the Marie-Curie Worshop held at CERN 3-4 October 2002. Title of this talk:"Marie Curie Fellows Association". Photo 0210006_29a: Dr. Nora Brambilla, Vice-President of Marie Curie Fellow Association, INFN a...

Mary Leue: A Tribute.

Science.gov (United States)

Becker, Ellen; Becker, Larry; McPheeters, Tom; Mercogliano, Chris

1999-01-01

Mary Leue started the Free School, an independent, alternative elementary school in inner-city Albany (New York), based on open democratic education dedicated to the authentic lives of children. Other accomplishments include a community-investment organization, a magazine of alternative education, a magazine for empowering families, and a…

Quench propagation and quench detection in the TF system of JT-60SA

International Nuclear Information System (INIS)

Lacroix, Benoit; Duchateau, Jean-Luc; Meuris, Chantal; Ciazynski, Daniel; Nicollet, Sylvie; Zani, Louis; Polli, Gian-Mario

2013-01-01

Highlights: • The JT-60SA primary quench detection system will be based on voltage measurements. • The early quench propagation was studied in the JT-60SA TF conductor. • The impact of the conductor jacket on the hot spot criterion was quantified. • The detection parameters were investigated for different quench initiations. -- Abstract: In the framework of the JT-60SA project, France and Italy will provide to JAEA 18 Toroidal Field (TF) coils including NbTi cable-in-conduit conductors. During the tokamak operation, these coils could experience a quench, an incidental event corresponding to the irreversible transition from superconducting state to normal resistive state. Starting from a localized disturbance, the normal zone propagates along the conductor and dissipates a large energy due to Joule heating, which can cause irreversible damages. The detection has to be fast enough (a few seconds) to trigger the current discharge, so as to dump the stored magnetic energy into an external resistor. The JT-60SA primary quench detection system will be based on voltage measurements, which are the most rapid technology. The features of the detection system must be adjusted so as to detect the most probable quenches, while avoiding inopportune fast safety discharges. This requires a reliable simulation of the early quench propagation, performed in this study with the Gandalf code. The conductor temperature reached during the current discharge must be kept under a maximal value, according to the hot spot criterion. In the present study, a hot spot criterion temperature of 150 K was taken into account and the role of each conductor component (strands, helium and conduit) was analyzed. The detection parameters were then investigated for different hypotheses regarding the quench initiation

Eisma sadamahoone = Eisma port building / Mari Kurismaa ; kommenteerinud Krista Aren

Index Scriptorium Estoniae

Kurismaa, Mari, 1956-

2015-01-01

Eluruumid Eisma sadamahoones (Eisma küla, Vihula vald, Lääne-Virumaa). Sisekujunduse autorid Mari Kurismaa, Indrek Allmann; arhitekt Indrek Allmann (AB Pluss). Eesti Sisearhitektide Liidu aastapreemia 2014/2015 parima kodu eest. Lühidalt Mari Kurismaast ja Indrek Allmannist

Mari Martin - vahelüli looja ja kandja vahel / Mari Martin ; intervjueerinud Tanel Veenre

Index Scriptorium Estoniae

Martin, Mari, 1983-

2009-01-01

Kalamari Promotioni tegevjuht, Tartu Ülikoolis majandust õppiv Mari Martin oma esimestest sammudest moemaailmas, kaubamärkide ReUse RePublic (premeeriti noorte äriideede võistlusel "Ajujaht 2009" 175000 krooniga) ja Tallinn Dolls loomisest, eesti disaineritest, unistustest seoses eesti disainiga

Design, fabrication and test of double-wall vacuum vessel for JT-60U

International Nuclear Information System (INIS)

Uchikawa, Takashi; Ioki, Kimihiro; Ninomiya, Hiromasa.

1994-01-01

A double-wall vacuum vessel was designed and fabricated for JT-60U (an upgraded machine of JT-60), which has a plasma current up to 6 MA and a large plasma volume (100 m 3 ). A new concept of Inconel 625 all-welded structure was adopted to the vessel, that comprises an inner plate, square tubes and an outer plate. The vacuum vessel with a multi-arc D-shaped cross section was fabricated by using hot-sizing press. The electromagnetic and structural analysis has been performed for plasma disruption loads. Dynamic responses of the vessel were measured during plasma disruptions, and the observed displacement had a good agreement with the result of FEM analysis. (author)

Airline fuel saving through JT9D engine refurbishment

Energy Technology Data Exchange (ETDEWEB)

Allison, J.W.; Weisel, D.R.

1981-01-01

Areas are identified in the JT9D engine where the potential exists for either further performance recovery following repair, or for improved performance retention. A number of new procedures and tools which will improve performance recovery are described. Improvements in inspection techniques are discussed. Operational techniques which will improve performance retention and impact degree of refurbishment required are also presented.

Mari Koger : "Arhitekte on palju. Tuleb leida õige" / Gitte Hint

Index Scriptorium Estoniae

Hint, Gitte

2003-01-01

Mari Koger (sünd. 1973) kodu kujundamisest, planeerimisest, valgustusest, värvidest, suhtlemisest kliendiga. Mari Kogerist, loetletud tema tehtud ühiskondlike ruumide sisekujundused aastast 2002. M. Koger töötab Boom.ee OÜ-s. Ill.: M. Kogeri värv. portree

Effect of tensile properties on time-dependent C(t) and J(t) integrals in elastic-plastic-creep FE analysis

International Nuclear Information System (INIS)

Lee, So-Dam; Lee, Han-Sang; Kim, Yun-Jae; Ainsworth, Robert A.; Dean, David W.

2016-01-01

This technical note presents the effect of elastic-plastic properties on calculated time-dependent C(t) and J(t) values. This is investigated via systematic elastic-plastic-creep finite element (FE) analysis. Three different stress-strain curves are used, having essentially the same plastic properties at large strains but different tensile data near the 0.2% proof (yield) strength. It is found that the plastic property in stress-strain curve affects the FE C(t) values only at short times (within approximately 20% of the redistribution time). The plastic property affects the initial J values at time t = 0 but not the rate of change of J(t) with time. - Highlights: • The effect of elastic-plastic properties on calculated time-dependent C(t) and J(t) values is presented via FE analysis. • The plastic property affects the FE C(t) values only at short times up to ∼20% of the redistribution time. • The plastic property affects the initial J values at time t = 0 but not the rate of change of J(t) with time.

Development of a VME and CAMAC based data acquisition and transfer system for JT-60 control

International Nuclear Information System (INIS)

Totsuka, Toshiyuki

1993-08-01

Development of a VME and CAMAC based data acquisition and transfer system for JT-60 Control is reported. The present data acquisition and transfer system in JT-60 control is basically composed of CAMAC devices. Since the system equipped with 16-bit microcomputers was manufactured more than ten years ago, the performance and program development environment of the system are apparently worse than those of modern 32-bit microcomputers. To improve these disadvantages, a new data acquisition and transfer system using VME-based 32-bit microcomputers and CAMAC drivers is under design. Corresponding to this design, a CAMAC handler, which runs on the microcomputer, for the VME based CAMAC driver was newly developed. Moreover, the functions of the driver and data transfer performance of the VME and CAMAC complex system were tested. The test results shown that the VME based microcomputer and CAMAC serial driver can be applied for the fast and reliable acquisition and transfer system for JT-60 control. (author)

Estimation of Freezing Point of Hydrocarbon and Hydrofluorocarbon Mixtures for Mixed Refrigerant jt Cryocooler

Science.gov (United States)

Hwang, G.; Lee, J.; Jeong, S.

2010-04-01

Estimating the freezing point of refrigerant is an essential part in designing an MR JT (Mixed refrigerant Joule-Thomson) cryocooler to prevent itself from clogging and to operate with stability. There were researches on estimating freezing point, but some of them resulted in the wrong prediction of clogging. In this paper, the freezing point of the MR is precisely estimated with caution of clogging. The solubility of HC (hydrocarbon) and HFC (hydrofluorocarbon) mixture components are obtained with their activity coefficients, which represent the molecular interaction among the components. The freezing points of the MR JT cryocooler are systematically investigated in the operating temperature range from 70 K to 90 K.

Core transport properties in JT-60U and JET identity plasmas

NARCIS (Netherlands)

Litaudon, X.; Sakamoto, Y.; de Vries, P. C.; Salmi, A.; Tala, T.; Angioni, C.; Benkadda, S.; Beurskens, M. N. A.; Bourdelle, C.; Brix, M.; Crombe, K.; Fujita, T.; Futatani, S.; Garbet, X.; Giroud, C.; Hawkes, N. C.; Hayashi, N.; Hoang, G. T.; Hogeweij, G. M. D.; Matsunaga, G.; Nakano, T.; Oyama, N.; Parail, V.; Shinohara, K.; Suzuki, T.; Takechi, M.; Takenaga, H.; Takizuka, T.; Urano, H.; Voitsekhovitch, I.; Yoshida, M.

2011-01-01

The paper compares the transport properties of a set of dimensionless identity experiments performed between JET and JT-60U in the advanced tokamak regime with internal transport barrier, ITB. These International Tokamak Physics Activity, ITPA, joint experiments were carried out with the same plasma

A new workstation based man/machine interface system for the JT-60 Upgrade

International Nuclear Information System (INIS)

Yonekawa, I.; Shimono, M.; Totsuka, T.; Yamagishi, K.

1992-01-01

Development of a new man/machine interface system was stimulated by the requirements of making the JT-60 operator interface more 'friendly' on the basis of the past five-year operational experience. Eleven Sun/3 workstations and their supervisory mini-computer HIDIC V90/45 are connected through the standard network; Ethernet. The network is also connected to the existing 'ZENKEI' mini-computer system through the shared memory on the HIDIC V90/45 mini-computer. Improved software, such as automatic setting of the discharge conditions, consistency check among the related parameters and easy operation for discharge result data display, offered the 'user-friendly' environments. This new man/machine interface system leads to the efficient operation of the JT-60. (author)

Review of JT-60 experiment (April-June, 1985)

International Nuclear Information System (INIS)

1986-11-01

Initial ohmic heating experiments in JT-60 were performed for a three month period of April-June 1985. A maximum plasma current of 1.6 MA was obtained for both divertor and limiter discharges. Low-q discharges of q eff = 2.5 and high density discharges of 4.8 x 10 19 m -3 were obtained in the divertor configuration. Typical divertor actions, i.e. particle exhaust, heat exhaust, impurity reduction and remote radiative cooling were demonstrated. (author)

Ion transport analysis of a high beta-poloidal JT-60U discharge

International Nuclear Information System (INIS)

Horton, W.; Tajima, T.; Dong, J.-Q.; Kim, J.-Y.; Kishimoto, Y.

1997-01-01

The high beta-poloidal discharge number 17110 in JT-60U (JT-60 Team, IAEA, Vienna, 1993) that developes an internal transport barrier is analysed for the transport of ion energy and momentum. First, the classical ion temperature gradient stability properties are calculated in the absence of sheared plasma flows to establish the L-mode transport level prior to the emergence of the transport barrier. Then the evolving toroidal and poloidal velocity profiles reported by Koide et al (1994 Phys. Rev. Lett. 72 3662) are used to show how the sheared mass flows control the stability and transport. Coupled energy-momentum transport equations predict the creation of a transport barrier. The balance of the steep ion temperature gradient against the magnetic shear and sheared mass flow is calculated for the profiles in the 17110 discharge. (Author)

Mary Magdalene, the Apostola of the Easter Morning: Changes in the Late Medieval Carthusian Office of St Mary Magdalene

Directory of Open Access Journals (Sweden)

Katarina Šter

2017-06-01

Full Text Available The Office of Mary Magdalene is one of the rare offices of the Carthusian liturgy that was changed after it had been established as a solemn feast with twelve lessons. In Matins, several chants changed their position or were even replaced by new ones. This article examines the relationship between the earlier and the later Office of St Mary Magdalene. Later corrections in the Lauds first antiphon, Maria stabat ad monumentum receive some special attention since they open new questions concerning the unity of the Carthusian liturgical tradition, and a possible connection between individual Carthusian manuscripts.

75 FR 3217 - J&T Hydro Company; H. Dean Brooks and W. Bruce Cox; Notice of Application for Transfer of License...

Science.gov (United States)

2010-01-20

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 11392-009] J&T Hydro Company; H. Dean Brooks and W. Bruce Cox; Notice of Application for Transfer of License and Soliciting Comments and Motions To Intervene January 12, 2010. On October 30, 2009, J&T Hydro Company (transferor) and...

Jean-Marie Dufour receives the Legion of Honour

CERN Multimedia

2001-01-01

French Ambassador Philippe Petit (left) presents the cross of Knight of the Légion d'Honneur to Jean-Marie Dufour. On Friday 22 June, Jean-Marie Dufour, Head of CERN's Legal Service, was made Knight of the Legion of Honour by Ambassador Philippe Petit, at a ceremony held at the Permanent Mission of France in Geneva. Ambassador Petit is Permanent Representative of France at the United Nations and French delegate at CERN. He was awarded the decoration in recognition of his services. He has played an active part in all the great stages of CERN's development, in fact, ranging from its scientific programmes, to its establishment in its Host States, Switzerland and France, and its opening up to the wider world. The ceremony took place in the presence of Professor Luciano Maiani. The award is an honour to CERN, and the Organization takes this opportunity to convey its friendliest congratulations to Jean-Marie Dufour, a committed European.

Physics and operation oriented activities in preparation of the JT-60SA tokamak exploitation

Science.gov (United States)

Giruzzi, G.; Yoshida, M.; Artaud, J. F.; Asztalos, Ö.; Barbato, E.; Bettini, P.; Bierwage, A.; Boboc, A.; Bolzonella, T.; Clement-Lorenzo, S.; Coda, S.; Cruz, N.; Day, Chr.; De Tommasi, G.; Dibon, M.; Douai, D.; Dunai, D.; Enoeda, M.; Farina, D.; Figini, L.; Fukumoto, M.; Galazka, K.; Galdon, J.; Garcia, J.; Garcia-Muñoz, M.; Garzotti, L.; Gil, C.; Gleason-Gonzalez, C.; Goodman, T.; Granucci, G.; Hayashi, N.; Hoshino, K.; Ide, S.; Imazawa, R.; Innocente, P.; Isayama, A.; Itami, K.; Joffrin, E.; Kamada, Y.; Kamiya, K.; Kawano, Y.; Kawashima, H.; Kobayashi, T.; Kojima, A.; Kubo, H.; Lang, P.; Lauber, Ph.; de la Luna, E.; Maget, P.; Marchiori, G.; Mastrostefano, S.; Matsunaga, G.; Mattei, M.; McDonald, D. C.; Mele, A.; Miyata, Y.; Moriyama, S.; Moro, A.; Nakano, T.; Neu, R.; Nowak, S.; Orsitto, F. P.; Pautasso, G.; Pégourié, B.; Pigatto, L.; Pironti, A.; Platania, P.; Pokol, G. I.; Ricci, D.; Romanelli, M.; Saarelma, S.; Sakurai, S.; Sartori, F.; Sasao, H.; Scannapiego, M.; Shimizu, K.; Shinohara, K.; Shiraishi, J.; Soare, S.; Sozzi, C.; Stępniewski, W.; Suzuki, T.; Suzuki, Y.; Szepesi, T.; Takechi, M.; Tanaka, K.; Terranova, D.; Toma, M.; Urano, H.; Vega, J.; Villone, F.; Vitale, V.; Wakatsuki, T.; Wischmeier, M.; Zagórski, R.

2017-08-01

The JT-60SA tokamak, being built under the Broader Approach agreement jointly by Europe and Japan, is due to start operation in 2020 and is expected to give substantial contributions to both ITER and DEMO scenario optimisation. A broad set of preparation activities for an efficient start of the experiments on JT-60SA is being carried out, involving elaboration of the Research Plan, advanced modelling in various domains, feasibility and conception studies of diagnostics and other sub-systems in connection with the priorities of the scientific programme, development and validation of operation tools. The logic and coherence of this approach, as well as the most significant results of the main activities undertaken are presented and summarised.

JT-60 plasma control system

International Nuclear Information System (INIS)

Kurihara, K.

1988-01-01

JT-60 plasma control can be performed by the supervisory controller, the measurement system and actuators such as the poloidal field coil power supplies, gas injectors, neutral beam injection (NBI) heating system and radio frequency (RF) heating system. One of the most important characteristics of this system is a perfect digital control one composed of mini-computers, fast array processors and CAMAC modules, and it has large flexibility and few troubles to adjust the system. This system started to be operated in April 1985, after the six-year-long design, construction and testing, and have been operated and improved many times for two years. In this paper, the final system specification and its performance are presented aiming at the technological aspect of hardware and software. In addition, and experienced troubles are also presented. (author)

Phenotypic spectrum of dynamin 2 mutations in Charcot-Marie-Tooth neuropathy

NARCIS (Netherlands)

Claeys, Kristl G.; Züchner, Stephan; Kennerson, Marina; Berciano, José; Garcia, Antonio; Verhoeven, Kristien; Storey, Elsdon; Merory, John R.; Bienfait, Henriette M. E.; Lammens, Martin; Nelis, Eva; Baets, Jonathan; de Vriendt, Els; Berneman, Zwi N.; de Veuster, Ilse; Vance, Jefferey M.; Nicholson, Garth; Timmerman, Vincent; de Jonghe, Peter

2009-01-01

Dominant intermediate Charcot-Marie-Tooth neuropathy type B is caused by mutations in dynamin 2. We studied the clinical, haematological, electrophysiological and sural nerve biopsy findings in 34 patients belonging to six unrelated dominant intermediate Charcot-Marie-Tooth neuropathy type B

In Remembrance: Mary Frances Lyon

Indian Academy of Sciences (India)

2014-12-25

Dec 25, 2014 ... turn came I told him that I wanted to work on X-chromosome inactivation. He asked ... are many students even in 2015 who get equally excited and curious about it. The 1961 .... (a) Mary Lyon in Kyoto, Japan, 1991. (b) During ...

Louis Leakey and Mary Leakey

Indian Academy of Sciences (India)

Permanent link: https://www.ias.ac.in/article/fulltext/reso/020/08/0667-0679. Keywords. Palaeoanthropology; human evolution; Louis Leakey; Mary Leakey; Africa; Olduvai gorge; fossil hominids. Author Affiliations. Rajan Gaur1. Department of Anthropology, Panjab University, Sector 14, Chandigarh UT 160 014, India ...

Conceptual design of divertor cassette handling by remote handling system for JT-60SA

International Nuclear Information System (INIS)

Hayashi, Takao; Sakurai, Shinji; Masaki, Kei; Tamai, Hiroshi; Yoshida, Kiyoshi; Matsukawa, Makoto

2007-01-01

The JT-60SA aims to contribute and supplement ITER toward DEMO reactor based on tokamak concept. One of the features of JT-60SA is its high power long pulse heating, causing the large annual neutron fluence. Because the expected dose rate at the vacuum vessel (VV) may exceed 1 mSv/hr after 10 years operation and three month cooling, the human access inside the VV is prohibited. Therefore a remote handling (RH) system is necessary for the maintenance and repair of in-vessel components. This paper described the RH system of JT-60SA, especially the expansion of the RH rail and exchange of the divertor modules. The RH rail is divided into nine and three-point mounting. The nine sections can cover 225 degrees in toroidal direction. A divertor module, which is 10 degrees wide in toroidal direction and weighs 500kg itself due to the limitations of port width and handling weight, can be exchanged by heavy weight manipulator (HWM). The HWM brings the divertor module to the front of the other RH port, which is used for supporting the rail and/or carrying in and out equipments. Then another RH device receives and brings out the module by a pallet installed from outside the VV. (author)

Conceptual design of divertor cassette handling by remote handling system of JT-60SA

International Nuclear Information System (INIS)

Hayashi, Takao; Sakurai, Shinji; Masaki, Kei; Tamai, Hiroshi; Yoshida, Kiyoshi; Matsukawa, Makoto

2008-01-01

The JT-60SA aims to contribute and supplement ITER toward demonstration fusion reactor based on tokamak concept. One of the features of JT-60SA is its high power long pulse heating, causing the large annual neutron fluence. Because the expected dose rate at the vacuum vessel (VV) may exceed 1 mSv/hr after 10 years operation and three month cooling, the human access inside the VV is restricted. Therefore a remote handling (RH) system is necessary for the maintenance and repair of in-vessel components. This paper described the RH system of JT-60SA, especially the expansion of the RH rail and exchange of the divertor cassettes. The RH rail is divided into nine and three-point mounting. The nine sections can cover 225 degrees in toroidal direction. A divertor cassette, which is 10 degrees wide in toroidal direction and weighs 500 kg itself due to the limitations of port width and handling weight, can be exchanged by heavy weight manipulator (HWM). The HWM brings the divertor cassette to the front of the other RH port, which is used for supporting the rail and/or carrying in and out equipments. Then another RH device receives and brings out the cassette by a pallet installed from outside the VV. (author)

Tritium processing in JT-60U

International Nuclear Information System (INIS)

Miya, Naoyuki; Masaki, Kei

1997-01-01

Tritium retention analysis and tritium concentration measurement have been made during the large Tokamak JT-60U deuterium operations. This work has been carried out to evaluate the tritium retention for graphite tiles inside the vacuum vessel and tritium release characteristics in the tritium cleanup operations. JT-60U has carried out D-D experiments since July 1991. In the deuterium operations during the first two years, about 1.7 x 10 19 D-D fusion neutrons were produced by D (d, p) T reactions in plasma, which are expected to produce ∼31 GBq of tritium. The tritium produced is evacuated by a pumping system. A part of tritium is, however, trapped in the graphite tiles. Several sample tiles were removed from the vessel and the retained tritium Distribution in the tiles was measured using a liquid scintillator. The results of poloidal distribution showed that the tritium concentration in the divertor tiles was higher than that in the first wall tiles and it peaked in the tiles between two strike points of divertor magnetic lines. Tritium concentration in the exhaust gas from the vessel have also been measured with an ion chamber during the tritium cleanup operations with hydrogen divertor discharges and He-GDC. Total of recovered tritium during the cleanup operations was ∼ 7% of that generated. The results of these measurements showed that the tritium of 16-23 GBq still remained in the graphite tiles, which corresponded to about 50-70% of the tritium generated in plasma. The vessel is ventilated during the in-vessel maintenance works, then the atmosphere is always kept lower than the legal concentration guide level of 0.7 Bq/cm 3 for radiation work permit requirements. (author)

Design study of a new P-NBI control system for 100-s injection in JT-60SA

International Nuclear Information System (INIS)

Honda, Atsushi; Okano, Fuminori; Shinozaki, Shinichi; Ooshima, Katsumi; Ikeda, Yoshitaka; Numazawa, Susumu

2007-03-01

The modification of the JT-60U to a fully superconducting coil tokamak, JT-60SA (Super Advanced), has been programmed as the satellite devise for the ITER (International Thermonuclear Experimental Reactor) and as the national centralized tokamak. The present positive-ion-based NBI system (P-NBI), which has been operated for 20 years and will be the main heating system on JT-60SA, is required to manage the long pulse injection extended from 30 s to 100 s at the power of 24 MW with 12 units. To realize such a requirement, the original control system handling more than 4000 digital data is to be fully remodeled. Design study of the new control system has been conducted from viewpoint of market availability, system extensibility, cost-effectiveness and independent development in programming. It has been concluded that a distributed control system using PLC (Programmable Logic Controller) could be applied to the large-scale control system for 100-s operations with satisfaction of the evaluation viewpoints. (author)

Kolm ministrit valgustasid Kagu-Eesti omavalitsusjuhte / Mari-Anne Leht

Index Scriptorium Estoniae

Leht, Mari-Anne, 1950-

2003-01-01

Valgamaal Taageperas räägiti Kagu-Eesti omavalitsusjuhtidele haridusest, haridusreformist ja rahast. Kohal olid ka haridus- ja teadusminister Toivo Maimets, siseminister Jaan Õunapuu ja majandusminister Meelis Atonen. Kommenteerivad Rein Randver, Pille Tali, Sirje Tobreluts jt. Vt. samas: Hannes Võrno kaebas rasket elu

Mary Grant Seacole: the first nurse practitioner.

Science.gov (United States)

Messmer, P R; Parchment, Y

1998-01-01

Mary Grant Seacole was born in 1805, in Kingston, Jamaica, to a Jamaican doctress (medicine woman) and a Scottish naval officer. Later Seacole became a doctress, nursing British soldiers during epidemics of cholera, dysentery, and yellow fever in Jamaica, Cuba, and Panama. After refusals by both the British government and Florence Nightingale to be allowed to practice in Scutari, she financed her own way to the scene of the Crimean War and then established the British Hotel to serve both the comfort and medical needs of the wounded soldiers. At night, Seacole worked side by side with Nightingale at Scutari as a volunteer nurse. Seacole's fame grew proportionately after she was seen helping wounded soldiers on the battlefields even while the battles were still raging. Seacole died on May 14, 1881, in London. One hundred years later, many members of the London black community, a few members of the Nurses Association of Jamaica and the Friends of Mary Seacole marched to her grave, honoring her as one of the greatest women of all times. Mary Grant Seacole rose above the barriers of racial prejudice and demonstrated the determinism, compassion, and caring that have became the hallmark of nurse practitioners.

Quench detection of fast plasma events for the JT-60SA central solenoid

International Nuclear Information System (INIS)

Murakami, Haruyuki; Kizu, Kaname; Tsuchiya, Katsuhiko; Kamiya, Koji; Takahashi, Yoshikazu; Yoshida, Kiyoshi

2012-01-01

Highlights: ► Pick-up coil method is used for the quench detection of JT-60SA magnet system. ► Disk-shaped pick-up coils are inserted in CS module to compensate inductive voltage. ► Applicability of pick-up coil is evaluated by two dimensional analysis. ► Pick-up coil is applicable whenever disruption, mini collapse and other plasma event. - Abstract: The JT-60 is planned to be modified to a full-superconducting tokamak referred to as the JT-60 Super Advanced (JT-60SA). The maximum temperature of the magnet during its quench might reach the temperature of higher than several hundreds Kelvin that will damage the superconducting magnet itself. The high precision quench detection system, therefore, is one of the key technologies in the superconducting magnet protection system. The pick-up coil method, which is using voltage taps to detect the normal voltage, is used for the quench detection of the JT-60SA superconducting magnet system. The disk-shaped pick-up coils are inserted in the central solenoid (CS) module to compensate the inductive voltage. In the previous study, the quench detection system requires a large number of pick-up coils. The reliability of quench detection system would be higher by simplifying the detection system such as reducing the number of pick-up coils. Simplifying the quench detection system is also important to reduce the total cost of the protection system. Hence the design method is improved by increasing optimizing parameters. The improved design method can reduce the number of pick-up coils without reducing the sensitivity of detection; consequently the protection system can be designed with higher reliability and lower cost. The applicability of the disk-shaped pick-up coil for quench detection system is evaluated by the two dimensional analysis. In the previous study, however, the analysis model only took into account the CS, EF (equilibrium field) coils and plasma. Therefore, applicability of the disk-shaped pick-up coil for

ASDEX Upgrade-JT-60U comparison and ECRH power requirements for NTM stabilization in ITER

International Nuclear Information System (INIS)

Urso, L.; Zohm, H.; Maraschek, M.; Poli, E.; Isayama, A.

2010-01-01

Neoclassical tearing modes (NTMs) are experimentally controlled with local electron cyclotron current drive (ECCD) and the island width decay during NTM stabilization is modelled using the so-called modified Rutherford equation (MRE). In this paper, a modelling of the MRE is carried out and simulations of the island width decay are compared with the experimentally observed ones in order to fit the two free machine-independent parameters present in the equation. A systematic study on a database of NTM stabilization discharges from ASDEX Upgrade and JT-60U is done for extrapolating the ECCD power requirements for ITER. The extrapolation to ITER of the NTM stabilization results from ASDEX Upgrade and JT-60U shows that 10 MW of ECCD power are enough to stabilize large NTMs. The 10 MW power estimate for ITER is based on the assumption that the free parameters in the MRE are machine independent. Indeed, this assumption is verified in this paper for ASDEX Upgrade and JT-60U. An interesting consequence of the relatively modest power requirement for ITER is that the installed 20 MW will suffice for simultaneous 2/1 and 3/2 NTM stabilization.

Global energy confinement in JT-60 neutral beam heated L-mode discharges

International Nuclear Information System (INIS)

Naito, O.; Hosogane, N.; Tsuji, S.; Ushigusa, K.; Yoshida, H.

1990-01-01

The global energy confinement characteristics of neutral beam heated JT-60 discharges are presented. There is a difference in the dependence of the energy confinement time on the plasma current between limiter and divertor discharges. For limiter discharges, the energy confinement increases with plasma current up to 3.2 MA, whereas for divertor discharges this improvement saturates when the safety factor drops below 3, independent of the location of the X-point. The JT-60 L-mode results indicate that the deterioration in energy confinement for q < 3, which is also found in H-mode regimes of other devices, may be a universal characteristic of divertor discharges. Regarding the scaling with plasma size, it is shown that the global/incremental confinement time increases with plasma minor radius. For sufficiently large plasmas, however, the global/incremental confinement time is no longer a function of minor radius. (author). 13 refs, 14 figs

Improvement of JT-60U Negative Ion Source Performance

International Nuclear Information System (INIS)

Grisham, L.R.; Kuriyama, M.; Kawai, M.; Itoh, T.; Umeda, N.

2000-01-01

The negative ion neutral beam system now operating on JT-60U was the first application of negative ion technology to the production of beams of high current and power for conversion to neutral beams, and has successfully demonstrated the feasibility of negative ion beam heating systems for ITER and future tokamak reactors [1, 2]. It also demonstrated significant electron heating[3] and high current drive efficiency in JT-60U[4]. Because this was such a large advance in the state of the art with respect to all system parameters, many new physical processes appeared during the earlier phases of the beam injection experiments. We have explored the physical mechanisms responsible for these processes, and implemented solutions for some of them, in particular excessive beam stripping, the secular dependence of the arc and beam parameters, and nonuniformity of the plasma illuminating the beam extraction grid. This has reduced the percentage of beam heat loading on the downstream grids by roug hly a third, and permitted longer beam pulses at higher powers. Progress is being made in improving the negative ion current density, and in coping with the sensitivity of the cesium in the ion sources to oxidation by tiny air or water leaks, and the cathode operation is being altered

"Troonide mäng" toob fantaasia usutavalt teleekraanile / Mari Rebane

Index Scriptorium Estoniae

Rebane, Mari

2011-01-01

USA telekanali HBO telesarjast "Troonide mäng", George R. R. Martini "Jää ja tule laulu" sarja esimese raamatu "Troonide mäng" teleekraniseeringust. Sarja esimene osa esilinastus USA-s 17. aprillil. Osades Sean Bean jt.

Kulturní hodnoty tzv. Mariánského trojúhelníku - Sloup, Vranov, Křtiny

OpenAIRE

Bezděková, Veronika

2009-01-01

In the Moravian Karst there are three big churches consecrated to The Virgin Mary. These are visited by many pilgrims and have their own calendar of pilgrimages. They are Vranov, Křtiny and Sloup. Churches in these towns are consecrated to The Virgin Mary: Vranov commemorates the birth of The Virgin Mary, Křtiny commemorates the name of The Virgin Mary and Sloup commemorates the sufferings of The Virgin Mary. So we talk about the triangle of The Virgin Mary. This term is the main point of my ...

Plaadid / Maris Meiesaar, Tui Hirv, Veiko Pesur...[jt.

Index Scriptorium Estoniae

2008-01-01

Uutest heliplaatidest Elbow "The Seldom Seen Kid", Bonzo "Ei saa mitte vaiki olla", Cavalera Conspiracy "Inflikted", Tiit Kaluste Jump Band "Prantsuse spetsaliteet", Gnarls Barkley "The Odd Couple", Counting Crows "Saturday Nights & Sunday Mornings"

Plaadid / Mari Rebane, Heidi Purga, Tiiu Laks...[jt.

Index Scriptorium Estoniae

2008-01-01

Uutest heliplaatidest Sigur Ros "Heim/Hvart", Jay-Z "American Gangster", Bob Marley and The Wailers "Roots, Rock, Remixed", Ghostface killah "The Big doe Rehab", Backstreet Boys "Unbreakable", Matchbox Twenty "Exile on Mainstream", "Just" Hits 6"

VME multiprocessor system for plasma control at the JT-60 Upgrade

International Nuclear Information System (INIS)

Kimura, T.; Kurihara, K.; Takahashi, M.; Kawamata, Y.; Akasaka, H.; Matsukawa, M.

1989-01-01

In this paper design and preliminary tests are reported of a VME multiprocessor system for the JT-60 Upgrade plasma control utilizing three MC88100 based RISC computers and VME buses. The design of the VME system was stimulated by faster and more accurate computation requirements for the plasma position and shape control

Study of particle pumping characteristics for different pumping geometries in JT-60U and DIII-D divertors

International Nuclear Information System (INIS)

Takenaga, H.; Sakasai, A.; Kubo, H.

2001-01-01

Particle pumping characteristics were compared between pumping from the inner side private flux region (IPP) and pumping from both sides of the private flux region (BPP) in the JT-60U W shaped divertor, and between JT-60U IPP and pumping in the DIII-D lower baffled divertor. The pumping flux for BPP is smaller than that for IPP by about a factor of 2 with weak in-out asymmetry of recycling neutral flux and by a factor of 3.5-6.5 with strong in-out asymmetry. The reduction of the pumping flux for BPP is consistent with Monte Carlo simulations, where backflow at the outer pumping slot is observed due to in-out recycling asymmetry. The pumping flux in DIII-D at I p =0.8 MA and B T =1.6 T is comparable to or smaller than that for JT-60U IPP at I p =1.0 MA, B T =3.8 T and I p =1.5 MA, B T =3.5 T in the same density regime. In the DIII-D divertor with pumping from the private flux region, the pumping flux decreases with increasing in-out asymmetry. The pumping flux normalized by the integrated D α emission over the whole plasma exhibits a similar dependence on the distance between the pumping slot and the strike point in JT-60U IPP and the DIII-D lower divertor with pumping through the outer divertor plasma region. (author)

Aktinäitus avas uksed

Index Scriptorium Estoniae

2010-01-01

17. rahvusvaheline aktinäitus "Mees ja naine" teemal "Tugevad tunded, haprad suhted" Pärnu Uue Kunsti Muuseumis 5. juunist 5. septembrini 2010. Aktinäituse peafookuses on klaasikunst. Esinevad Mari Meszaros (Ungari-Holland), Mart Angus (Inglismaa), Stanislav ja Radka Muller (Tšehhi), Inguna Audere (Läti) jt.

The healthiness of JT-60 ICRF antenna and development of its temperature measurement device

International Nuclear Information System (INIS)

Hiranai, Shinichi; Yokokura, Kenji; Moriyama, Shinichi; Sato, Tomio; Ishii, Kazuhiro; Fujii, Tsuneyuki

1998-03-01

Ion Cyclotron Range of Frequency (ICRF) heating system in JT-60 employs two antennas to couple RF power in the range of 100 MHz to the plasma. The antennas are installed in the vacuum vessel of JT-60, facing to the high temperature plasma. Due to the severe heat load from the plasma, parts of the antenna surface are suffering from melt. It is important to investigate the mechanism of the heat load and the melting. 'Temperature measurement for ICRF antenna surface' employing an infrared thermographic camera has been developed, in order to investigate the heat load to the antenna and to maintain the antenna available. We have succeeded in minimizing the melting damage of the antenna surface using the temperature measurement device. (author)

Special Workshop of Marie Curie Fellows on Research and Training in Physics and Technology

CERN Multimedia

Patrice Loiez

2002-01-01

Photo 0210004_1: Prof. Ugo Amaldi, University of Milano Bicocca and Tera Foundation, Italy. Addressing the Marie Curie Workshop held at CERN 3-4 October 2002. Title of this talk:"Research Developments on Medical Physics". Photo 0210004_2: Marie Curie Fellows at CERN. Participating in Marie Curie Workshop held at CERN 3-4 October 2002.

'BRS Mari': nova cultivar de pimenta dedo-de-moça para processamento 'BRS Mari': new hot pepper cultivar for processing

Directory of Open Access Journals (Sweden)

Sabrina Isabel C de Carvalho

2009-12-01

Full Text Available 'BRS Mari' é uma nova cultivar de pimenta dedo-de-moça desenvolvida para uso múltiplo, como produto in natura, processada na forma de molho líquido ou desidratada em flocos, moída junto com as sementes, para a produção de pimenta tipo 'calabresa'. A cv. 'BRS Mari' foi desenvolvida a partir da população 'CNPH 0039' por meio de seis ciclos de seleção massal com autofecundação controlada. A nova cultivar apresenta plantas de polinização aberta com hábito de crescimento intermediário, com aproximadamente 90 cm de altura e 1,25 m de largura, com resistência múltipla a doenças, com destaque para o virus Pepper Yellow Mosaic Virus (PepYMV e nematóide das galhas (Meloidogyne javanica, resistência mediana ao oídio (Oidium sicula, mancha bacteriana (Xanthomonas spp. e antracnose (Colletotrichum spp.. A colheita dos frutos tem início cerca de 70 dias após o transplante. Nas condições da região Centro-Oeste, 'BRS Mari' apresentou boa uniformidade de planta, ótima qualidade de fruto e grande potencial produtivo, alcançando 35 t ha-1 em seis meses, quando cultivada no espaçamento de 1 m entre plantas e 1,5 m entre linhas. Os frutos são alongados e pendentes, típicos do tipo dedo-de-moça, com passagem de coloração verde claro, amarelo com antocianina e laranja quando imaturos e vermelho intenso quando maduros, com aproximadamente 6,0 cm de comprimento, 1,4 cm de largura e cerca de 1,7 mm de espessura da parede. A principal característica da 'BRS Mari' é o elevado teor de capsaicina, aproximadamente 90.000 SHU (Unidades de Calor Scoville, mais elevado quando comparada com outras cultivares do mesmo grupo.'BRS Mari' is a new hot pepper cultivar suitable for processing as sauce or dehydrated flakes, ordinarily known in Brazil as 'calabresa' type, as well as for fresh market. Hot pepper cv. 'BRS Mari' was obtained from population 'CNPH 0039', through six cycles of mass selection with controlled selfing of selected plants. The

Bon appetite! / Mari-Liis Rebane

Index Scriptorium Estoniae

Rebane, Mari-Liis

2009-01-01

Pimedate Ööde 13. filmifestivali alafestivali Animated Dreams täispikki animafilme: Austraalia "Mary ja Max" (režissöör Elliot, Adam), Rootsi-Taani-Norra "Metropia" (režissöör Tarik Saleh), Iisraeli-Austraalia "9,99 dollarit" (režissöör Tatia Rosenthal)

Power and particle control in JT-60SA to support and supplement ITER and DEMO

International Nuclear Information System (INIS)

Sakurai, Shinji

2007-01-01

JT-60 is planned to be modified as a fully superconducting coil tokamak (JT-60 Super Advanced, JT-60SA). Divertor targets are water-cooled to handle heat flux up to 15 MW/m 2 . JT-60SA allows exploitation of high beta regime with stabilizing shell covered with ferritic plates and internal resistive wall mode (RWM) stabilizing coils. A remote handling system is equipped to maintain in-vessel components even for high dose rate due to a substantial annual neutron production. Divertor cassettes are introduced to be maintained by a remote handling. In the present design, a monoblock type carbon fibre composite (CFC) divertor target will be used to withstand a heat load of ∼15 MW/m 2 . CFC divertor targets and other bolted armor tiles will be mounted on the divertor cassette. All of the plasma facing components including the first wall armor are water-cooled to handle heat load during 100s or more. Divertor heat load and pumping efficiency for an ITER-like configuration has been evaluated, using 2D plasma fluid (SOLDOR) and neutral Monte-Carlo (NEUT2D) code. The pumping speed of 50 m 3 /s is specified at an albedo for neutrals in front of the in-vessel cryopanel. In the simulation for the divertor with a V -shaped corner' like as that in ITER, the plasma detachment occurs near the outer-strike point within the 'V-shaped corner', as well as near the inner-strike point, which results in low peak heat flux density 5.8 MW/m 2 for the case with additional gas puff of 5x10 21 /s compared to 11.4 MW/m 2 for the case without 'V-shaped corner'. (author)

Results of the H-mode experiments with JT-60 outer and lower divertors

International Nuclear Information System (INIS)

Nakamura, Hiroo; Tsuji, Shunji; Nagami, Masayuki

1989-08-01

In JT-60, hydrogen H-mode experiments with outer and lower divertors were performed. In the outer divertor, H-mode were obtained, similar to the ones observed in the other lower/upper divertors. Its threshold absorbed power and electron density were 16 MW and 1.8 x 10 19 m -3 . In the two combined heatings with NB+ICRF and NB+LHRF, H-mode discharges are also obtained. Moreover, in new configuration of lower divertor, H-mode phases without and with ELM are obtained. Typical results of the lower divertor are shown to compare the H-mode characteristics between the two configurations. Improvement of the energy confinement time in the two divertors was limited to 10 %. Analyses on ballooning/interchange instabilities were carried out with precise equlibria of JT-60. These results showed that the both modes were enough stable. (author)

Plasma regimes and research goals of JT-60SA towards ITER and DEMO

International Nuclear Information System (INIS)

Kamada, Y.; Ide, S.; Fujita, T.; Suzuki, T.; Matsunaga, G.; Yoshida, M.; Shinohara, K.; Urano, H.; Nakano, T.; Sakurai, S.; Kawashima, H.; Barabaschi, P.; Lackner, K.; Ishida, S.; Bolzonella, T.

2011-01-01

The JT-60SA device has been designed as a highly shaped large superconducting tokamak with a variety of plasma actuators (heating, current drive, momentum input, stability control coils, resonant magnetic perturbation coils, W-shaped divertor, fuelling, pumping, etc) in order to satisfy the central research needs for ITER and DEMO. In the ITER- and DEMO-relevant plasma parameter regimes and with DEMO-equivalent plasma shapes, JT-60SA quantifies the operation limits, plasma responses and operational margins in terms of MHD stability, plasma transport and confinement, high-energy particle behaviour, pedestal structures, scrape-off layer and divertor characteristics. By integrating advanced studies in these research fields, the project proceeds 'simultaneous and steady-state sustainment of the key performances required for DEMO' with integrated control scenario development applicable to the highly self-regulating burning high-β high bootstrap current fraction plasmas.

JT-60 power tests from mechanical and thermal viewpoints of tokamak machine

International Nuclear Information System (INIS)

Takatsu, H.; Yamamoto, M.; Ohkubo, M.

1986-01-01

JT-60 power tests were carried out, to demonstrate, in advance of actual plasma operation, satisfactory performance of the tokamak machine, power suppliers and control system in combination. The tests began with low power ones of individual coil systems, progressed to full power ones and concluded successfully. The present paper describes the principal results of JT-60 power tests from mechanical and thermal viewpoints of tokamak machine. All of the coil systems were raised up to full power operation in combination and system performance was verified including thermal and mechanical integrity of tokamak machine. Measured strain and displacement showed good agreements with those predicted in the design, which was an evidence that electromagnetic loads were supported adequately as expected in the design. Vibration of the vacuum vessel was found to be large up to 48 m/s/sup 2/ and caused excessive vibration of the lateral port gate-valves. A few limitations to machine operation were also made clear quantatively

Rosie Carpe and the Virgin Mary: Modelling Modern Motherhood

Directory of Open Access Journals (Sweden)

Pauline Eaton

2016-06-01

Full Text Available Marie NDiaye’s 2001 novel, Rosie Carpe, incorporates, as one of its several instances of parenting failure, the narrative of the decline of a single mother from adequacy to abuse. This narrative, which is the focus of this article, might be said to put flesh on the bones of Julia Kristeva’s deconstruction of the Virgin Mary in her 1980s essay ‘Stabat Mater’. Kristeva saw the Marian model as out of date but she interrogated its enduring power and its continuing influence on our cultural perceptions of maternity. NDiaye’s eponymous Rosie realises she is pregnant but has no idea how this has come about. Rosie is not represented as a woman who has a religious faith but she decides to accept her child as a holy miracle. This article analyses how the ‘mythology’ of the Virgin Mary, and other biblical intertext, is woven into the narrative of Rosie’s experience of motherhood, so as to counterpoint and illuminate Rosie’s bleak and raw inner experience of maternity, an experience which, while confirming that Rosie is not, and never could have been, a modern Virgin Mary nevertheless refreshes the human stories at the root of the Christian narrative.

Communication systems in JT-60 control

International Nuclear Information System (INIS)

Kimura, T.; Hosogane, N.; Kondo, I.; Kumahara, T.; Kurihara, K.; Yonekawa, I.; Yoshino, R.

1983-01-01

A new concept in communication is applied to the JT-60 control system which handles a large amount of data for the plant support and monitoring and for the discharge control including plasma feedback control. The communication systems are characterized by 1) adoption of an efficient protocol in the central highways which are composed of dual serial CAMAC ones, 2) standardization of the protocol and data format between the central controller and each subsystem one, 3) adoption of a polling method for plant monitoring and of block transfer for discharge conditions and results, and 4) use of novel modules for the fast data transfer in the real-time systems. A compact tool has also been developed for testing the data communication

Klassika & ekskremendid / Mari Sobolev

Index Scriptorium Estoniae

Sobolev, Mari, 1968-

2002-01-01

20.-21. aprillil toimus Pärnus 8. Fideo- ja Vilmifestival alapealkirjaga "Eksperimendid ja klassika". Peakorraldaja Rael Artel. Rami Raski filmist "Legowitz 1999" (soome rühmitus Vivid), läti filmist "Love, death & television", Concordia ülikooli ("Ülemus") ja Academia Grata (portreefilmid Asta Isakist, Andrus Joonasest jm.) programmist, Kadriann Kibuse ja Liina Paakspuu filmist "Urban Obsessions", Mirja-Mari Smidti ja Allan Tõnissoo videost, Marianne Männi koomiksitest kataloogis

The Mesoscale Science of the Matter-Radiation Interactions in Extremes (MaRIE) project

Energy Technology Data Exchange (ETDEWEB)

Kippen, Karen Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Montoya, Donald Raymond [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-08-17

The National Nuclear Security Administration (NNSA) requires the ability to understand and test how material structures, defects, and interfaces determine performance in extreme environments such as in nuclear weapons. To do this, MaRIE will be an x-ray source that is laser-like and brilliant with very fl exible and fast pulses to see at weapons-relevant time scales, and with high enough energy to study critical materials. The Department of Energy (DOE) has determined there is a mission need for MaRIE to deliver this capability. MaRIE can use some of the existing infrastructure of the Los Alamos Neutron Science Center (LANSCE) and its accelerator capability. MaRIE will be built as a strategic partnership of DOE national laboratories and university collaborators.

Trans-Colonial Collaboration and Slave Narrative: Mary Prince Revisited

Directory of Open Access Journals (Sweden)

Michelle Gadpaille

2011-10-01

Full Text Available In 1831 in London, two formidable women met: Mary Prince, an ex-slave from Bermuda, who had crossed the Atlantic to a qualified freedom, and Susanna Strickland, an English writer. The narrative that emerged from this meeting was The History of Mary Prince, which played a role in the fight for slave emancipation in the British Empire. Prince disappeared once the battle was won, while Strickland emigrated to Upper Canada and, as Susanna Moodie, became an often quoted 19th century Canadian writer. Prince dictated, Strickland copied, and the whole was lightly edited by Thomas Pringle, the anti-slavery publisher at whose house the meeting took place. This is the standard account. In contesting this version, the paper aims to reinstate Moodie as co-creator of the collaborative Mary Prince text by considering multiple accounts of the meeting with Prince and to place the work in the context of Moodie’s pre- and post-emigration oeuvre on both sides of the Atlantic.

Causes of Charcot-Marie-Tooth Disease (CMT)

Science.gov (United States)

... Marie-Tooth Disease (CMT) Congenital Muscular Dystrophy (CMD) Duchenne Muscular Dystrophy (DMD) Emery-Dreifuss Muscular Dystrophy Endocrine Myopathies Metabolic Diseases of Muscle Mitochondrial Myopathies (MM) Myotonic Dystrophy (DM) Spinal-Bulbar ...

Mary Somerville and the world of science

CERN Document Server

Chapman, Allan

2015-01-01

Mary Somerville (1780-1872), after whom Somerville College Oxford was named, was the first woman scientist to win an international reputation entirely in her own right, rather than through association with a scientific brother or father. She was active in astronomy, one of the most demanding areas of science of the day, and flourished in the unique British tradition of Grand Amateurs, who paid their own way and were not affiliated with any academic institution. Mary Somerville was to science what Jane Austen was to literature and Frances Trollope to travel writing. Allan Chapman’s vivid account brings to light the story of an exceptional woman, whose achievements in a field dominated by men deserve to be very widely known.

Development of Gyrotron and JT-60U EC heating system for fusion reactor

International Nuclear Information System (INIS)

Sakamoto, K.; Kasugai, A.; Ikeda, Yo.

2003-01-01

The progress of ECH technology, for ITER and JT-60U tokamak, are presented. In the development of gyrotron, 0.9MW/9.2sec, 0.5MW/30sec, 0.3MW/60sec, etc. have been demonstrated at 170GHz. At 110GHz, 1.3MW/1.2sec, 1.2MW/4.1sec, 1MW/5sec were obtained. It is found that the reduction of the stray radiation and the enhancement of cooling capability are keys for CW operation. Four 110GHz gyrotrons are under operation in the ECH system of JT-60U. The power up to approximately 3MW/2.7sec was injected into the plasma through the poloidally movable mirrors, and contributed to the electron heating up to 26keV(n e ∼0.5x10 13 cm -3 ), and the suppression of the neo-classical tearing mode. (author)

Development of gyrotron and JT-60U EC heating system for fusion reactor

International Nuclear Information System (INIS)

Sakamoto, K.; Kasugai, A.; Ikeda, Yo.

2003-01-01

The progress of ECH technology, for ITER and JT-60U tokamak, are presented. In the development of gyrotron, 0.9MW/9.2sec, 0.5MW/30sec, 0.3MW/60sec, etc. have been demonstrated at 170GHz. At 110GHz, 1.3MW/1.2sec, 1.2MW/4. 1sec. 1MW/5sec were obtained. It is found that the reduction of the stray radiation and the enhancement of cooling capability are keys for CW operation. Four 110GHz gyrotrons are under operation in the ECH system of JT-60U. The power up to approximately 3MW/2.7sec was injected into the plasma through the poloidally movable mirrors, and contributed to the electron heating up to 26keV(n e ∼0.5x10 13 cm -3 ), and the suppression of the neo-classical tearing mode. (author)

Large intragenic deletion of CDC73 (exons 4-10) in a three-generation hyperparathyroidism-jaw tumor (HPT-JT) syndrome family.

Science.gov (United States)

Guarnieri, Vito; Seaberg, Raewyn M; Kelly, Catherine; Jean Davidson, M; Raphael, Simon; Shuen, Andrew Y; Baorda, Filomena; Palumbo, Orazio; Scillitani, Alfredo; Hendy, Geoffrey N; Cole, David E C

2017-08-03

Inactivating mutations of CDC73 cause Hyperparathyroidism-Jaw Tumour syndrome (HPT-JT), Familial Isolated Hyperparathyroidism (FIHP) and sporadic parathyroid carcinoma. We conducted CDC73 mutation analysis in an HPT-JT family and confirm carrier status of the proband's daughter. The proband had primary hyperparathyroidism (parathyroid carcinoma) and uterine leiomyomata. Her father and daughter had hyperparathyroidism (parathyroid adenoma) but no other manifestations of HPT-JT. CDC73 mutation analysis (sequencing of all 17 exons) and whole-genome copy number variation (CNV) analysis was done on leukocyte DNA of the three affecteds as well as the proband's unaffected sister. A novel deletion of exons 4 to 10 of CDC73 was detected by CNV analysis in the three affecteds. A novel insertion in the 5'UTR (c.-4_-11insG) that co-segregated with the deletion was identified. By in vitro assay the 5'UTR insertion was shown to significantly impair the expression of the parafibromin protein. Screening for the mutated CDC73 confirmed carrier status in the proband's daughter and the biochemistry and ultrasonography led to pre-emptive surgery and resolution of the hyperparathyroidism. A novel gross deletion mutation in CDC73 was identified in a three-generation HPT-JT family emphasizing the importance of including screening for large deletions in the molecular diagnostic protocol.

Radikaalsus muuseumi kaitsva teki all / Mari Sobolev

Index Scriptorium Estoniae

Sobolev, Mari, 1968-

2004-01-01

Rotermanni soolalaos avatud Marco (Marko) Laimre isiknäituse "Küsimused ja vastused" puhul 13. IV toimunud konverentsist. Johannes Saare, Eha Komissarovi, Hanno Soansi, Anders Härmi ja Mari Sobolevi ettekannetest

On the Turn of Two Millennia (60 Years of the Mari Archaeological Expedition

Directory of Open Access Journals (Sweden)

Nikitin Valeriy V.,

2017-03-01

Full Text Available The article is dedicated to the 60th Anniversary of the Mari Archaeological Expedition and summarizes the two decades of its studies (1996-2016 into the early cultures of the Mari region, starting from the era of the original settlement (Mesolithic, through the Neolithic-Eneolithic, Bronze Age, Early Iron Age and up to the Middle Ages. The expedition studied stations and settlements of primitive cultures, as well as unfortified and fortified settlements and necropolises. Special studies focused on formation and development of the early Mari culture, as well as the material and spiritual culture of the medieval Mari. The expedition continues its survey exploration in order to identify new archaeological sites. During the reported period, twelve monographs were published and three monographs prepared based on the expedition’s materials.

Machine performance and its effects on experiments in JT-60U

International Nuclear Information System (INIS)

Kondo, I.

1995-01-01

The operational results of JT-60U were reviewed in light of the strategy made at the design stage. The operational plan for better confinement shifted from that of low q to high poloidal beta plasma configuration with higher q value according to the revealed machine properties. Some technical and operational skills helped bring about the recent results out of the machine. (orig.)

Big and small women facing small culture / Reet Varblane

Index Scriptorium Estoniae

Varblane, Reet, 1952-

1999-01-01

Feministlik kunst Eestis alates 1994. aastast. Näitustest EST. FEM, Kood-eks, Private Views. Videod. Fotoinstallatsioonid. Tuntumad kunstnikud: Mare Tralla, Ene-Liis Semper, Mari Laanemets, Eve Kiiler, Tiina Tammetalu, Kai Kaljo, Ly Lestberg, Liina Siib jt. Kunstnike rühmitused: F.F.F.F. Teemad: ema, väike naine, keha. 6 illustratsiooni

Улицы "Попёртых сценарей" / Марианна Тарасенко

Index Scriptorium Estoniae

Тарасенко, Марианна

2010-01-01

Artiklis sellest, kuidas tuntud krimikirjanike teoseid kasutatakse Venemaal teleseriaalide (ja filmide) stsenaariumites ilma originaali autorit nimetamata. Näiteina on toodud seriaal "Крестный сын" (Patrick Quentin, "My Son, the Murderer"), "Омут" (Mary Higgis Clark, "On the Street Where You Live") jt

Leadership, Longevity, and Leaning In: An Interview With Mary Jo (Joey) Bulfin.

Science.gov (United States)

Prestia, Angela S

2018-06-01

This column profiles Mary Jo Bulfin, MBA, RN, CENP, chief executive officer of St. Mary's Medical Center, West Palm Beach, Florida. Ms Bulfin began her career as a staff nurse in the organization where she is now the CEO and discusses her career path and lessons learned.

Design of JT-60SA magnets and associated experimental validations

International Nuclear Information System (INIS)

Zani, L.; Barabaschi, P.; Peyrot, M.; Meunier, L.; Tomarchio, V.; Duglue, D.; Decool, P.; Torre, A.; Marechal, J.L.; Della Corte, A.; Di Zenobio, A.; Muzzi, L.; Cucchiaro, A.; Turtu, S.; Ishida, S.; Yoshida, K.; Tsuchiya, K.; Kizu, K.; Murakami, H.

2011-01-01

In the framework of the JT-60SA project, aiming at upgrading the present JT-60U tokamak toward a fully superconducting configuration, the detailed design phase led to adopt for the three main magnet systems a brand new design. Europe (EU) is expected to provide to Japan (JA) the totality of the toroidal field (TF) magnet system, while JA will provide both Equilibrium field (EF) and Central Solenoid (CS) systems. All magnet designs were optimized trough the past years and entered in parallel into extensive experimentally-based phases of concept validation, which came to maturation in the years 2009 and 2010. For this, all magnet systems were investigated by mean of dedicated samples, e.g. conductor and joint samples designed, manufactured and tested at full scale in ad hoc facilities either in EU or in JA. The present paper, after an overall description of magnet systems layouts, presents in a general approach the different experimental campaigns dedicated to qualification design and manufacture processes of either coils, conductors and electrical joints. The main results with the associated analyses are shown and the main conclusions presented, especially regarding their contribution to consolidate the triggering of magnet mass production. The status of respective manufacturing stages in EU and in JA are also evoked. (authors)

Esther Schor, ed. The Cambridge Companion to Mary Shelley

Directory of Open Access Journals (Sweden)

Anne BERTON

2006-06-01

Full Text Available “Today, whether she is found between staid cloth covers, in paperback, on the screen or in cyberspace, Mary Shelley is everywhere,” writes Esther Schor in her Introduction to this collection of essays (2. Interest in “the Author of Frankenstein” and of other works has grown steadily over the last twenty years, thanks notably to the publication of her Journals (The Journals of Mary Shelley, 1814-1844, ed. Paula R. Feldman and Diana Scott-Kilvert, 2 vols, Oxford: Clarendon, 1987, of her Lette...

High Mach flow associated with plasma detachment in JT-60U

International Nuclear Information System (INIS)

Hatayama, A.; Hoshino, K.; Miyamoto, K.

2003-01-01

Recent new results of the high Mach flows associated with plasma detachment are presented on the basis of numerical simulations by a 2-D edge simulation code (the B2-Eirene code) and their comparisons with experiments in JT-60U W-shaped divertor plasma. High Mach flows appear near the ionization front away from the target plate. The plasma static pressure rapidly drops, while the total pressure is kept almost constant near the ionization front, because the ionization front near the X-point is clearly separated from the momentum loss region near the target plate. Redistribution from static to dynamic pressure without a large momentum loss is confirmed to be a possible mechanism of the high Mach flows. It has been also shown that the radial structure of the high Mach flow near the X point away from the target plate has a strong correlation with the DOD (Degree of Detachment) at the target plate. Also, we have made systematic analyses on the high Mach flows for both the 'Open' geometry and the 'W-shaped' geometry of JT-60U in order to clarify the geometric effects on the flows. (author)

Navodnenija v umah zactroishtshikov / Maris Kuuda

Index Scriptorium Estoniae

Kuuda, Maris

2007-01-01

Kohalikel omavalitsustel pole piisavalt hoobasid sundida arendajaid üleujutusohuga arvestama. Pärnusse hotelli September rajajad (arhitektid Emil Urbel, Andrus Mark) arvestavad ujutusohuga. Arvamust avaldavad Rene Reisner, Mari Sepp, Ülo Sults, Karri Tiigisoon, Indrek Rannik, Mark Soosaar, Tiiu Pärn, Merle Looring, Rita Sepp, Kaspar Alles

The design study of the JT-60SU device. No. 4. The vacuum vessel and cryostat of JT-60SU

International Nuclear Information System (INIS)

Neyatani, Yuzuru; Ushigusa, Kenkichi; Tobita, Kenji

1997-03-01

The vacuum vessel and the cryostat for the JT-60 Super Upgrade (JT-60SU) have been designed. Two types of the complex materials for the vacuum vessel were chosen on the basis of the avoidance of tritium occlusion and the low irradiation, i.e. (1) SUS316 covered by tungsten plate (30mm thickness) as a γ-ray shielding, (2) Ti-6Al-4V alloy covered by SUS430 plate (1mm thickness) as a tritium protector. Selecting the double skin type of vacuum vessel with toroidally continued structure gave the basic design of the vacuum vessel satisfying the design criteria of the vessel strength for the electromagnetic force, heat load and the property of radiation shielding. The characteristics of the SUS316 covered by tungsten plate type is that as the tungsten can shield the γ-ray, the dose rate inside the vacuum vessel during the maintenance can reduce effectively. The advantage of the Ti-6Al-4V alloy covered by SUS430 plate type vacuum vessel is the quick reduction of the radioactive isotope because of no production of the isotopes with long half-life periods. Channel type and vertical type of the divertor were designed. The sector type of toroidally separated structure was selected for the remote handling. The material of the armor plate was not determined because no material endure the high heat load on the divertor. The cryostat composing the dome and the tank was designed. The electromagnetic force by the eddy current, generated at the plasma start up phase and at the quench of CS super-conducting coil, were small compared to the force produced by the stress limit. (author)

Parametric thermo-hydraulic analysis of the TF system of JT-60SA during fast discharge

International Nuclear Information System (INIS)

Polli, Gian Mario; Lacroix, Benoit; Zani, Louis; Besi Vetrella, Ugo; Cucchiaro, Antonio

2013-01-01

Highlights: • We modeled the central clock-wise pancake of JT-60SA TF magnet at the EOB. • We simulated a quench followed by a fast discharge. • We evaluated the temperature and pressure rises in the nominal configuration. • We evaluated the effect of several parameter changes on the thermal-hydraulic response of the system. -- Abstract: The evolution of the conductor temperature and of the helium pressure of the central pancake of the TF superconducting magnet of the JT-60SA tokamak in a quench scenario are here discussed. The quench is triggered by a heat disturbance applied at the end of burning and followed by a fast safety discharge. A parametric study aimed at assessing the robustness of the calculation is also addressed with special regard to the voltage threshold, used to define the occurrence of the quench, and to the time delay, that cover all the possible delays in the fast discharge after quench detection. Finally, due to sensitivity analyses the influences of different parameters were assessed: the material properties of the strands (RRR, copper fraction), the magnitude and the spatial length of the triggering disturbance and the magnetic field distribution. The numerical evaluations were performed in the framework of the Broader Approach Agreement in collaboration with CEA, ENEA and the JT-60SA European Home Team using the 1D code Gandalf [1

Charcot-Marie-Tooth disease.

LENUS (Irish Health Repository)

Reilly, Mary M

2011-03-01

Charcot-Marie-Tooth (CMT) disease is the commonest inherited neuromuscular disorder affecting at least 1 in 2,500. Over the last two decades, there have been rapid advances in understanding the molecular basis for many forms of CMT with more than 30 causative genes now described. This has made obtaining an accurate genetic diagnosis possible but at times challenging for clinicians. This review aims to provide a simple, pragmatic approach to diagnosing CMT from a clinician\\'s perspective.

Carbon transport and fuel retention in JT-60U with high temperature operation based on postmortem analysis

Energy Technology Data Exchange (ETDEWEB)

Yoshida, M., E-mail: yoshida.masafumi@jaea.go.jp [Japan Atomic Energy Agency, Mukoyama 801-1, Naka-shi, Ibaraki-ken 311-0193 (Japan); Tanabe, T.; Adachi, A. [Interdisciplinary Graduate School of Engineering Sciences, Kyushu University, 6-10-1 Hakozaki, Higashi-ku, Fukuoka 812-8581 (Japan); Hayashi, T.; Nakano, T.; Fukumoto, M.; Yagyu, J.; Miyo, Y.; Masaki, K.; Itami, K. [Japan Atomic Energy Agency, Mukoyama 801-1, Naka-shi, Ibaraki-ken 311-0193 (Japan)

2013-07-15

Fuel retention rates and carbon re-deposition rates in the plasma shadowed areas, or tile gaps and remote areas, in JT-60U were measured. The total fuel retention rate in the plasma shadowed areas was more than two times higher than that in the carbon re-deposited layers on the plasma facing surfaces, or the divertor tiles. This is because of lower temperature in the plasma shadowed areas than in the plasma facing surfaces, which leads to high hydrogen saturation concentration, although the amount of the carbon re-deposited on the plasma shadowed areas was only 60% of that on the plasma facing surfaces. The total fuel retention rate in JT-60U, including previously determined for all the plasma facing areas, was evaluated to be 1.3 × 10{sup 20} H + D s{sup −1}, and this retention rate was lower than that in the other devices, due probably to high baking temperature operation in JT-60U. Distributions of the fuel retention and the carbon re-deposition in the whole in-vessel of a large tokamak were determined for the first time in the world.

Carbon transport and fuel retention in JT-60U with high temperature operation based on postmortem analysis

International Nuclear Information System (INIS)

Yoshida, M.; Tanabe, T.; Adachi, A.; Hayashi, T.; Nakano, T.; Fukumoto, M.; Yagyu, J.; Miyo, Y.; Masaki, K.; Itami, K.

2013-01-01

Fuel retention rates and carbon re-deposition rates in the plasma shadowed areas, or tile gaps and remote areas, in JT-60U were measured. The total fuel retention rate in the plasma shadowed areas was more than two times higher than that in the carbon re-deposited layers on the plasma facing surfaces, or the divertor tiles. This is because of lower temperature in the plasma shadowed areas than in the plasma facing surfaces, which leads to high hydrogen saturation concentration, although the amount of the carbon re-deposited on the plasma shadowed areas was only 60% of that on the plasma facing surfaces. The total fuel retention rate in JT-60U, including previously determined for all the plasma facing areas, was evaluated to be 1.3 × 10 20 H + D s −1 , and this retention rate was lower than that in the other devices, due probably to high baking temperature operation in JT-60U. Distributions of the fuel retention and the carbon re-deposition in the whole in-vessel of a large tokamak were determined for the first time in the world

Special Workshop of Marie Curie Fellows on Research and Training in Physics and Technology.

CERN Multimedia

Patrice Loiez

2002-01-01

Photo 0210008_05a: Dr, Rolf Landua (CERN) explaining to participants of the Marie Curie Workshop (held at CERN 3-4 October 2002) the ATHENA experiment and the Antiproton Decelerator. Photo 0210008_06a: Dr, Rolf Landua (CERN) explaining to participants of the Marie Curie Workshop (held at CERN 3-4 October 2002) the ATHENA experiment and the Antiproton Decelerator. Photo 0210008_08a: Dr, Rolf Landua (CERN) explaining to participants of the Marie Curie Workshop (held at CERN 3-4 October 2002) the ATHENA experiment and the Antiproton Decelerator. Photo 0210008_09a: Dr, Rolf Landua (CERN) explaining to participants of the Marie Curie Workshop (held at CERN 3-4 October 2002) the ATHENA experiment and the Antiproton Decelerator.

A different voice: Mary Hays's the Memoirs of Emma Courtney.

Science.gov (United States)

Sharma, A

2001-01-01

Mary Hays wrote in the decade of the 1790s, a period of intense creative flowering in England. Writing in a period enshrined to the works of the canonical Wordsworth and Coleridge, Hays explored through her Jacobinical novel, The Memoirs of Emma Courtney, the contentious relationship between self and society. Like other Jacobin women writers - Elizabeth Inchbald, Charlotte Smith and Mary Wollstonecraft - Mary Hays too used her novel to explode the insidious connection between education and gender construction. Emma Courtney is a landmark novel that wrestles with the paradigm of decorum and propriety which disallows women from voicing their aspirations. In the process, Hays merges the plots of the domestic novel of courtship and love with the novel of ideas to create a searing portrait of women's intellectual confinement and psychic dissonance in a society that only projects them in terms of their gender construction. Memoirs of Emma Courtney is a remarkable novel in its depiction of the emotional imbalance created by thwarted desire: intellectual and sexual.

Mary Catherine and Me: Building Cross-Cultural Relationships in "Post-Racial" America

Science.gov (United States)

Bruno, Holly Elissa

2009-01-01

In 1963, President Obama's parents could not have married legally in a number of states. Mary Catherine and the author graduated from Corning Free Academy in Corning, New York, in June 1963. The lessons they learned were wrenching: "Someone is going to get hurt." Doors that opened for the author slammed in Mary Catherine's face. Holding Mary…

Identificação diferencial de Rhodococcus equi e Dietzia maris em bubalinos Differential identification of Rhodococcus equi and Dietzia maris in buffaloes

Directory of Open Access Journals (Sweden)

L.R. Viana

2009-08-01

Full Text Available Foram analisados 24 isolados bacterianos oriundos de leite e pele de búfalas (Bubalus bubalis, os quais foram previamente identificados como Rhodococcus equi com o auxílio de fenotipia concisa. Testes fenotípicos complementares e ferramentas moleculares foram utilizados com o objetivo de caracterizar esses isolados, bem como diferenciá-los de outros microrganismos intimamente relacionados. Observaram-se três fenótipos distintos, porém a identificação dos isolados foi inconclusiva. Apenas um dos isolados foi comprovado como sendo R. equi com a realização da PCR espécie-específica, sequenciamento e análise dos fragmentos de DNA. Os demais isolados só foram identificados pelo sequenciamento de fragmento do gene que codifica a região 16S do rRNA universal de bactérias, indicando tratar-se de Dietzia maris. O perfil de susceptibilidade aos antimicrobianos revelou maior resistência dos isolados de D. maris para oxacilina (96% e rifampicina (87%. O isolado de R. equi apresentou resistência à amicacina, oxacilina, penicilina, rifampicina e tetraciclina. Alerta-se para o risco da incorreta identificação dos isolados baseados em testes fenotípicos concisos e para a necessidade de utilização de testes complementares para diferenciação entre R. equi e D. maris.Twenty-four bacterial isolates from milk and skin of buffalo females (Bubalus bubalis, which previously had been identified as Rhodococcus equi by using a restricted number of phenotypical tests for bacterial characterization, were analyzed. The goal of this study was to perform the characterization of these isolates, as well as the differentiation of other microorganisms closely related by using additional phenotypical tests and molecular tools. Based on the phenotypical results, three different biotypes were obtained. However, the identification of the isolates was inconclusive. Only one of the isolates was confirmed as R. equi by the PCR specifically for this species, as

Magnetic field measurements of JT-60SA CS model coil

Energy Technology Data Exchange (ETDEWEB)

Obana, Tetsuhiro, E-mail: obana.tetsuhiro@LHD.nifs.ac.jp [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Takahata, Kazuya; Hamaguchi, Shinji; Chikaraishi, Hirotaka; Mito, Toshiyuki; Imagawa, Shinsaku [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Kizu, Kaname; Murakami, Haruyuki; Natsume, Kyohei; Yoshida, Kiyoshi [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

2015-01-15

Highlights: • Magnetic fields of the JT-60SA CS model coil were measured. • While the coil current was held constant at 20 kA, magnetic fields varied slightly with several different long time constants. • We investigated coils consisting of CIC conductors and having long time constants. - Abstract: In a cold test of the JT-60SA CS model coil, which has a quad-pancake configuration consisting of a Nb{sub 3}Sn cable-in-conduit (CIC) conductor, magnetic fields were measured using Hall sensors. For a holding coil current of 20 kA, measured magnetic fields varied slightly with long time constants in the range 17–571 s, which was much longer than the time constant derived from a measurement using a short straight sample. To validate the measurements, the magnetic fields of the model coil were calculated using a computational model representing the positions of Nb{sub 3}Sn strands inside the CIC conductor. The calculated results were in good agreement with the measurements. Consequently, the validity of the magnetic field measurements was confirmed. Next, we investigated other coils consisting of CIC conductors and having long time constants. The only commonality among the coils was the use of CIC conductors. At present, there is no obvious way to prevent generation of such magnetic-field variations with long time constants.

Sirbi tegijad läbi aegade

Index Scriptorium Estoniae

2004-01-01

Toimetaja asetäitjad: Katrin Kivimaa, Reet Varblane jt. Kunst, arhitektuur: Alo Hoidre, Boris Lukats, Ressi Kaera, Jaak Olep, Ike Volkov, Mirjam Peil, Tiina Käesel, Katrin Kivimaa, Vappu Vabar, Reet Varblane, Mari Laaniste. Kunstnikud (arvutikujundus): Tõnu Soo, Ann Gornischeff, Gädvi Kuklase, Piia Ruber. Fotograafid: Solomon Rosenfeldt, Endel Köster, Kalju Suur, Arno Saar, Teet Malsroos

Mary Abigail Dodge: Journalist & Anti-Feminist.

Science.gov (United States)

Beasley, Maurine

Mary Abigail Dodge, a Washington, D.C., correspondent before and after the United States Civil War, was one of the most acclaimed women journalists of the nineteenth century. Unknown today, Dodge wrote on politics, religion, and contemporary issues for newspapers and magazines and commented prolifically on the role of women in society. After…

TOURISM PLANNING OPPORTUNITIES FOR THE SALT LAKES OF OCNELE MARI AND OCNIŢA

Directory of Open Access Journals (Sweden)

POPESCU ANTOANETA-CARINA

2012-03-01

Full Text Available Tourism Planning Opportunities for The Salt Lakes of Ocnele Mari and Ocniţa. Ocnele Mari used to be a popular balneal tourism destination in the Southern region of Romania, Oltenia. Due to the hilly climate and the two balneal establishments of Ocnele Mari and Ocniţa, tourists could find the necessary natural cure factors for rheumatic and cardiovascular diseases. However, the salt from Ocnele Mari was also used for industrial purposes, being extracted through solution mining, which proved to be detrimental to the environment. Salt underground dissolution caused land subsidence and landslide in the area, together with the formation of large salt lakes. Security became an issue, the number of tourists diminished and the balneal equipment became obsolete because of lack of modernization investment. Under these circumstances, on the basis of field work, we have reached the conclusion that a better planning of the resort and of the salt lakes would contribute to the economic development of the region.

Chaos M-ary modulation and demodulation method based on Hamilton oscillator and its application in communication.

Science.gov (United States)

Fu, Yongqing; Li, Xingyuan; Li, Yanan; Yang, Wei; Song, Hailiang

2013-03-01

Chaotic communication has aroused general interests in recent years, but its communication effect is not ideal with the restriction of chaos synchronization. In this paper a new chaos M-ary digital modulation and demodulation method is proposed. By using region controllable characteristics of spatiotemporal chaos Hamilton map in phase plane and chaos unique characteristic, which is sensitive to initial value, zone mapping method is proposed. It establishes the map relationship between M-ary digital information and the region of Hamilton map phase plane, thus the M-ary information chaos modulation is realized. In addition, zone partition demodulation method is proposed based on the structure characteristic of Hamilton modulated information, which separates M-ary information from phase trajectory of chaotic Hamilton map, and the theory analysis of zone partition demodulator's boundary range is given. Finally, the communication system based on the two methods is constructed on the personal computer. The simulation shows that in high speed transmission communications and with no chaos synchronization circumstance, the proposed chaotic M-ary modulation and demodulation method has outperformed some conventional M-ary modulation methods, such as quadrature phase shift keying and M-ary pulse amplitude modulation in bit error rate. Besides, it has performance improvement in bandwidth efficiency, transmission efficiency and anti-noise performance, and the system complexity is low and chaos signal is easy to generate.

Validation of special processes for the integration activities of the JT-60SA TF coils manufactured in Italy

Energy Technology Data Exchange (ETDEWEB)

Polli, Gian Mario, E-mail: gianmario.polli@enea.it [ENEA, UT-FUS, Via E. Fermi 45, Frascati (Italy); Cucchiaro, Antonio; Cocilovo, Valter [ENEA, UT-FUS, Via E. Fermi 45, Frascati (Italy); Drago, Giovanni; Pesenti, Paolo; Cuneo, Stefano; Terzi, Franco [ASG Superconductors, Corso Perrone 73 r, Genova (Italy); Phillips, Guy; Tomarchio, Valerio [JT-60SA European Home Team, 85748 Garching bei Munchen (Germany)

2015-10-15

Highlights: • Insertion. • Casing welding. • Casing embedding. - Abstract: In the framework of the Broader Approach Agreement for the construction of the JT-60SA tokamak, ENEA provides 9 of the 18 toroidal field (TF) coils of the JT-60SA magnet system. The 9 coils are being manufactured by ASG superconductors in Genoa under the supervision of ENEA in collaboration with the JT-60SA European home team. The manufacturing is composed of two main steps: one concerning winding pack assembly and impregnation, and the other devoted to the integration into the casing structure and associated final coil preparation. This paper describes the results of the validation activities set-up for the integration phase. Specifically, welding of casing components has been retained particularly critical for at least three reasons: (i) during welding the WP may be damaged by the intense heating; (ii) distortion caused by heating may determine incorrect coil geometry and then field errors; and (iii) flaws may reduce structural strength and then the overall lifetime of the machine. Similarly, final embedding has been demonstrated on a 1 m long mock-up of the coil. Main results and lessons learned are here described.

A coil test facility for the cryogenic tests of the JT-60SA TF coils

International Nuclear Information System (INIS)

Chantant, M.; Genini, L.; Bayetti, P.; Millet, F.; Wanner, M.; Massaut, V.; Corte, A. Della; Ardelier-Desage, F.; Catherine-Dumont, V.; Dael, A.; Decool, P.; Donati, A.; Duchateau, J.L.; Garibaldi, P.; Girard, S.; Hatchressian, J.C.; Fejoz, P.; Jamotton, P.; Jourdheuil, L.; Juster, F.P.

2011-01-01

In the framework of the Broader Approach Activities, the EU will deliver to Japan the 18 superconducting coils, which constitute the JT-60SA Toroidal field magnet. These 18 coils, manufactured by France and Italy, will be cold tested before shipping to Japan. For this purpose, the European Joint Undertaking for ITER, the Development of Fusion Energy ('Fusion for Energy', F4E) and the European Voluntary Contributors are collaborating to design and set-up a coil test facility (CTF) and to perform the acceptance test of the 18 JT-60SA Toroidal Field (TF) coils. The test facility is designed to test one coil at a time at nominal current and cryogenic temperature. The test of the first coil of each manufacturer includes a quench triggered by increasing the temperature. The project is presently in the detailed design phase.

Potential hosts for Lambertella corni-maris and Phacidium lacerum within the family Rosaceae

Science.gov (United States)

Two fungi were described in 2015 and 2016 as pathogens of pome fruit in the Pacific Northwest USA: Lambertella corni-maris on apple (Malus domestica), and Phacidium lacerum (synonym, Ceuthospora pinastri) on apple and d’Anjou pear (Pyrus communis). We documented pathogenicity of L. corni-maris to d...

"Inhumanly brought back to life and misery": Mary Wollstonecraft, Frankenstein, and the Royal Humane Society.

Science.gov (United States)

Williams, C

2001-01-01

While thorough investigation of many aspects of contemporary scientific developments and Mary Shelley's personal history have provided illuminating contexts for the study of Frankenstein, the activities of the Royal Humane Society, and other bodies and individuals who pioneered and publicized resuscitation techniques, have been comparatively neglected. Here we find a richly documented, highly conspicuous area of scientific endeavour, which generated much excitement in life and literature from the last quarter of the eighteenth century onwards. There are three major points of contact with Frankenstein: Victor Frankenstein's revival of dead tissue to make his creature; the frequent occurrences of unconsciousness and asphyxia, both in the novel and in Mary Shelley's family during the period leading up to its composition, and the widely differing degrees of competence and success with which they are treated; and the possibility that resuscitative techniques were used to revive Mary Shelley's mother, Mary Wollstonecraft, after a suicide attempt. The impact on Frankenstein of Mary Shelley's lifelong distress at the role she played in bringing about her mother's death in childbirth has been thoroughly canvassed by other critics, notably Anne Mellor, but the thought that Mary Shelley, who was herself conceived after her mother's second suicide attempt, might be, in a sense, a child of the dead adds a further turn to the Gothic screw. This study traces a hitherto unexplored intersection between Mary Shelley's first novel and her family history, as well as showing how it launches a formidable attack on the shady ethics and inconsiderate arrogance of some early resuscitators.

J.T. van der Kemp and his Critique of the Settler Farmers on the ...

African Journals Online (AJOL)

Theoretically, I draw on some insights from works of Michel Foucault, especially with regard to eighteenth and early nineteenth century 'representational thought', where 'idea' and 'object' are directly related. Keywords: J.T. van der Kemp, settler farmers, frontier, patriot, rebellion, slavery, baptism, cruelty, Black Circuit Court ...

Aspectos históricos da visita de Marie Sklodowska Curie a Belo Horizonte

Directory of Open Access Journals (Sweden)

Cássius Klay Nascimento

2011-01-01

Full Text Available In the year 2011 it is celebrated the Marie Sklodowska Curie Nobel Prize centenary and the International Year of Chemistry. However, it is not generally known that Marie Sklodowska Curie, one of the greatest scientists of all time, visited Belo Horizonte, state of Minas Gerais, Brazil. She arrived by train at Belo Horizonte city on 16 August 1926, coming from Rio de Janeiro and accompanied by her daughter Irène Joliot-Curie. The scientists visited the Institute of Radium of Belo Horizonte. The approach in this work emphasizes the presence of Marie Sklodowska Curie in Belo Horizonte, exploring the admiration and respect that people had for her.

‘Het witte spook van Mesdag’. De bruid van Matthijs Maris opnieuw bezien’

NARCIS (Netherlands)

Bionda, R.W.A.

2013-01-01

The Bride (1867-'68) by Matthijs Maris in The Mesdag Collection is without doubt one of his most intriguing early works. Though he defensively described it as only a 'sketch' which he could not bring to a satisfying end, Maris considered this fairly large piece as quite important. Regardless of its

75 FR 51945 - Safety Zone; Potomac River, St. Mary's River, St. Inigoes, MD

Science.gov (United States)

2010-08-24

...-AA00 Safety Zone; Potomac River, St. Mary's River, St. Inigoes, MD AGENCY: Coast Guard, DHS. ACTION... of the St. Mary's River, a tributary of the Potomac River. This action is necessary to provide for.... Navy helicopter located near St. Inigoes, Maryland. This safety zone is intended to protect the...

Joint resistance measurements of pancake and terminal joints for JT-60SA EF coils

Energy Technology Data Exchange (ETDEWEB)

Obana, Tetsuhiro, E-mail: obana.tetsuhiro@LHD.nifs.ac.jp [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Takahata, Kazuya; Hamaguchi, Shinji; Mito, Toshiyuki; Imagawa, Shinsaku [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Kizu, Kaname; Murakami, Haruyuki; Yoshida, Kiyoshi [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

2013-11-15

Highlights: • To evaluate the joint fabrication technology for the JT-60SA EF coils, joint resistance measurements were conducted with a joint sample. • The joint sample was composed of pancake and terminal joints. • The measurements demonstrated that both joints fulfilled the design requirement. • Considering the measurements, the characteristics of both joints were investigated using an analytical model that represents the joints. -- Abstract: To evaluate the joint fabrication technology for the JT-60SA EF coils, joint resistance measurements were conducted using a sample consisting of pancake and terminal joints. Both joints are shake-hands lap joints composed of cable-in-conduit conductors and a pure copper saddle-shaped spacer. The measurements demonstrated that both joints fulfilled the design requirement. Considering these measurements, the characteristics of both joints were investigated using analytical models that represent the joints. The analyses indicated that the characteristics of the conductors used in the joints affect the characteristics of the joints.

Design and performance tests of gas circulation heating of JT-60U vacuum vessel

International Nuclear Information System (INIS)

Yotsuga, M.; Masuzaki, T.; Sago, H.; Nishikane, M.; Uchikawa, T.; Iritani, Y.; Murakami, T.; Horiike, H.; Neyatani, Y.; Ninomiya, H.; Matsukawa, M.; Ando, T.; Miyachi, I.

1992-01-01

This paper reports that in the final stage of construction of the upgraded JT-60 device (JT-60U), baking tests of the vacuum vessel was performed. The vessel torus was heated-up to 300 degrees C by means of the nitrogen gas circulation system and electric heaters mounted on the outboard solid wall of the vessel. The design of the gas flow channels inside the double-wall structure of the vessel was done based on flow model tests, fluid analysis, and flow network analysis. The results of the baking tests were satisfactory. In maintaining 300 degrees C bake-out temperature, required heating power of the gas circulation system and outboard heaters was 520kW and 50kW, respectively. The temperature distribution over the vessel wall was within 300 ± 30 degrees C. It was also shown or suggested that heat-up and cool-down time is about 30 hours. The baking tests data have been reflected on operations for plasma experiments

Fabrication and performance tests of a prototype in-situ coating machine for JT-60

International Nuclear Information System (INIS)

Obara, Kenjiro; Abe, Tetsuya; Murakami, Yoshio

1987-09-01

Prior to the design and construction of the JT-60's in-situ coating device, a prototype machine was fabricated and tested to confirm the applicability of proposed driving methods and mechanical elements to the device which would be operated in very severe conditions including high ambient temperature and high vacuum. The machine basically consists of an in-vessel manipulator, a fiberscope and an ohmically heated titanium evaporator. From the test results, we recommended to use the combination of Inconel 625 and a self-lubricating alloy for the solid-lubricated bearings and MoS 2 -coated Inconel 625 for the solid-lubricated gears. It was also found that TiC coating showed a effect for the prevention of welding between bolts and nuts. In order to optimize the operating parameters of the machine, many wall inspection tests and titanium evaporation tests were carried out in a large vacuum vessel by simulating the JT-60 conditions. (author)

Friendship in the Life and Work of Mary Wollstonecraft: The Making of a Liberal Feminist Tradition

DEFF Research Database (Denmark)

Pedersen, Joyce Senders

2008-01-01

Mary Wollstonecrafts venskaber placeres indenfor en liberal fortolkningstradition . Udgivelsesdato: Spring 2008......Mary Wollstonecrafts venskaber placeres indenfor en liberal fortolkningstradition . Udgivelsesdato: Spring 2008...

Improvement of the real-time processor in JT-60 data processing system

International Nuclear Information System (INIS)

Sakata, S.; Kiyono, K.; Sato, M.; Kominato, T.; Sueoka, M.; Hosoyama, H.; Kawamata, Y.

2009-01-01

Real-time processor, RTP is a basic subsystem in the JT-60 data processing system and plays an important role in JT-60 feedback control for plasma experiment. During the experiment, RTP acquires various diagnostic signals, processes them into a form of physical values, and transfers them as sensor signals to the particle supply and heating control supervisor for feedback control via reflective memory synchronization with 1 ms clock signals. After the start of RTP operation in 1997, to meet the demand for advanced plasma experiment, RTP had been improved continuously such as by addition of diagnostic signals with faster digitizers, reducing time for data transfer utilizing reflective memory instead of CAMAC. However, it is becoming increasingly difficult to maintain, manage, and improve the outdated RTP with limited system CPU capability. Currently, a prototype RTP system is being developed for the next real-time processing system, which is composed of clustered system utilizing VxWorks computer. The processes on the existing RTP system will be decentralized to the VxWorks computer to solve the issues of the existing RTP system. The prototype RTP system will start to operate in August 2008.

Characteristics of divertor plasma and scrape-off layer in JT-60U

International Nuclear Information System (INIS)

Itami, K.; Shimada, M.; Hosogane, N.

1992-01-01

Heat flux to the divertor is measured by thermography and the heat transport in the scrape-off layer is studied in beam heated discharges of JT-60U. The heat flux onto the divertor is ∝50% of total beam power at maximum. The in-out asymmetry of the heat flux P HEAT in /P HEAT out is as large as 20-40% when the ion grad-B drift is toward the divertor. Differences in P HEAT in /P HEA T out due to the direction of ion grad-B drift are as large as large as ∝40%. A scaling of the peaking factor Y of heat flux, defined by Y=2πRfq max /P HEAT , is obtained for beam heated discharges in JT-60U with a wide range of plasma parameters. The Y corresponds to the inverse of the thickness of the scrape-off layer. From a statistical analysis, it is found that the peaking factor Y of heat flux scales as P HEAT 0.49±0.18 anti n e -0.45±0.22 q eff -0.67±0.18 . (orig.)

Developmental prototype for replacement of JT-60 timing system

International Nuclear Information System (INIS)

Akasaka, H.; Kawamata, Y.; Yonekawa, I.

2004-01-01

The present CAMAC based timing system has been used for synchronizing sequential events of the discharge and the data collection of the interesting JT-60U experiment plasma phenomena. However, a more flexible and sophisticated state-of-the-art timing system now is required to realize advanced plasma control with minimal maintenance costs. In this context, the versa module Europe (VME-bus) system with a high-speed data communication network using reflective memory (RM) modules and user-friendly application software based on MATLAB TM tools has been selected to develop the new prototype timing system. In the ZENKEI, the supervisory control system of the JT-60, the supervisory timing system provides the 50-μs master clock pulses, the various timing signal preparation logic, which is built into the digital signal processing (DSP) module in conjunction with the discharge sequence event signals, and the 6.2 MB/s high-speed communication data link provided by the RM module. Except the clock pulse generator (CPG) module, no other special timing module is necessary for this new timing system. The timing signal is prepared by software logic in conjunction with sequential events and the preset timer, is transferred to the subsystems through the RM module, where it is synchronized to the 50-μs clock pulses. The timing system of the subsystems also consists of hardware similar in structure to the ZENKEI timing system. The fundamental timing system configuration, the necessary functions, and the preliminary test results of the prototype system are reported in this presentation

ERATO-code analysis of vacuum magnetic field oscillations in JT-60 divertor configuration

International Nuclear Information System (INIS)

Ozeki, Takahisa; Tokuda, Shinji; Tsunematsu, Toshihide; Ishida, Shinichi; Neyatani, Yuzuru; Itami, Kiyoshi; Azumi, Masafumi

1989-07-01

Magnetic field oscillations caused by external kink instabilities are numerically studied by using the ideal MHD stability code ERATO-J. Dependence of a spatial distribution of their amplitude and phase on aspect-ratio, beta-poloidal, shaping of conducting shell and divertor/limiter configurations is examined in detail. In the low aspect ratio plasma, the amplitude of magnetic oscillations in the inner side of the torus is larger than that in the outer. On the contrary, as the poloidal beta increases, the amplitude in the outer side of the torus becomes larger than that in the inner. In the divertor configuration, the amplitude of oscillations reduces near the X-point and the phase is locally modulated. The coherent magnetic oscillations observed in JT-60 agree well with the theoretical results, where the vacuum vessel is assumed to be an ideal conducting shell. The non-uniformity of the poloidal distribution observed in JT-60 can be explained by the combined effects of the finite beta, the X-point and the shape of shell. (author)

Dynamic simulations for preparing the acceptance test of JT-60SA cryogenic system

Science.gov (United States)

Cirillo, R.; Hoa, C.; Michel, F.; Poncet, J. M.; Rousset, B.

2016-12-01

Power generation in the future could be provided by thermo-nuclear fusion reactors like tokamaks. There inside, the fusion reaction takes place thanks to the generation of plasmas at hundreds of millions of degrees that must be confined magnetically with superconductive coils, cooled down to around 4.5 K. Within this frame, an experimental tokamak device, JT-60SA is currently under construction in Naka (Japan). The plasma works cyclically and the coil system is subject to pulsed heat loads. In order to size the refrigerator close to the average power and hence optimizing investment and operational costs, measures have to be taken to smooth the heat load. Here we present a dynamic model of the JT-60SA's Auxiliary Cold box (ACB) for preparing the acceptance tests of the refrigeration system planned in 2016 in Naka. The aim of this study is to simulate the pulsed load scenarios using different process controls. All the simulations have been performed with EcosimPro® and the associated cryogenic library: CRYOLIB.

The seminal role played by Pierre Marie in Neurology and Internal Medicine

Directory of Open Access Journals (Sweden)

Gustavo M Almeida

2015-10-01

Full Text Available The authors review the most important contributions of Pierre Marie to the elucidation and description of several neurological diseases, such as Charcot-Marie-Tooth’s disease and hereditary cerebellar ataxia, as well as his contributions to Internal Medicine, including his pioneering studies on acromegaly, ankylosing spondylitis, and hypertrophic pulmonary osteoarthropathy. His works led to incontestable advances in the medical sciences that transcended his time.

A bust of Marie Sklodowska Curie at CERN

CERN Multimedia

CERN PhotoLab

1979-01-01

The Polish Deputy Minister of Energy and Nuclear Power, J. Felicki, presented the Directors General with a bust of Mme Marie Sklodowska Curie on behalf of physicists of Poland (CERN Courier 19 (1979) 164).

Ämari baas sobib USA-le ja brittidele

Index Scriptorium Estoniae

2013-01-01

Eelmisel nädalal Eestit külastanud USA ja Ühendkuningriigi sõjalised esindajad NATO juures kindralleitnandid David R. Hogg ja Christopher Harper kinnitasid, et on valmis oma lennukeid Ämari baasist opereerima

JT-60SA vacuum vessel manufacturing and assembly

Energy Technology Data Exchange (ETDEWEB)

Masaki, Kei, E-mail: masaki.kei@jaea.go.jp [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Shibama, Yusuke K.; Sakurai, Shinji; Shibanuma, Kiyoshi; Sakasai, Akira [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan)

2012-08-15

Highlights: Black-Right-Pointing-Pointer The design of the JT-60SA vacuum vessel body was completed with the demonstration of manufacturing procedure by the mock-up fabrication of the 20 Degree-Sign upper half of VV. Black-Right-Pointing-Pointer The actual VV manufacturing has started since November 2009. Black-Right-Pointing-Pointer The first product of the VV 40 Degree-Sign sector was completed in May 2011. Black-Right-Pointing-Pointer A basic VV assembly scenario and procedure were studied to complete the 360 Degree-Sign VV including positioning method and joint welding. - Abstract: The JT-60SA vacuum vessel (VV) has a D-shaped poloidal cross section and a toroidal configuration with 10 Degree-Sign segmented facets. A double wall structure is adopted to ensure high rigidity at operational load and high toroidal one-turn resistance. The material is 316L stainless steel with low cobalt content (<0.05%). The design temperatures of the VV at plasma operation and baking are 50 Degree-Sign C and 200 Degree-Sign C, respectively. In the double wall, boric-acid water is circulated at plasma operation to reduce the nuclear heating of the superconducting magnets. For baking, nitrogen gas is circulated in the double wall after draining of the boric-acid water. The manufacturing of the VV started in November 2009 after a fundamental welding R and D and a trial manufacturing of 20 Degree-Sign upper half mock-up. The manufacturing of the first VV 40 Degree-Sign sector was completed in May 2011. A basic concept and required jigs of the VV assembly were studied. This paper describes the design and manufacturing of the vacuum vessel. A plan of VV assembly in torus hall is also presented.

Status of the cold test facility for the JT-60SA tokamak toroidal field coils

Energy Technology Data Exchange (ETDEWEB)

Abdel Maksoud, Walid, E-mail: walid.abdelmaksoud@cea.fr; Bargueden, Patrick; Bouty, André; Dispau, Gilles; Donati, André; Eppelle, Dominique; Genini, Laurent; Guiho, Patrice; Guihard, Quentin; Joubert, Jean-Michel; Kuster, Olivier; Médioni, Damien; Molinié, Frédéric; Sinanna, Armand; Solenne, Nicolas; Somson, Sébastien; Vieillard, Laurence

2015-10-15

Highlights: • The 5 K cryogenic loop includes a 500 W refrigerator and a She cold pump. • The coils are energized thanks to a 25.7 kA power supply and HTS current leads. • Temperature margin tests between 5 K and 7.5 K will be made on each coil. • A magnet safety system protects each double pancake of the coil in case of quench. • Instrumentation is monitored on a 1 Hz to 10 kHz fast acquisition system. - Abstract: JT-60SA is a fusion experiment which is jointly constructed by Japan and Europe and which shall contribute to the early realization of fusion energy, by providing support to the operation of ITER, and by addressing key physics issues for ITER and DEMO. In order to achieve these goals, the existing JT-60U experiment will be upgraded to JT-60SA by using superconducting coils. The 18 TF coils of the JT-60SA device will be provided by European industry and tested in a Cold Test Facility (CTF) at CEA Saclay. The coils will be tested at the nominal current of 25.7 kA and will be cooled with supercritical helium between 5 K and 7.5 K to check the temperature margin against a quench. The main objective of these tests is to check the TF coils performance and hence mitigate the fabrication risks. The most important components of the facility are: a 11.5 m × 6.5 m large cryostat in which the TF coils will be thermally insulated by vacuum; a 500 W helium refrigerator and a valve box to cool the coils down to 5 K and circulate 24 g/s of supercritical helium through the winding pack and through the casing; a power supply and HTS current leads to energize the coil; the control and instrumentation equipment (sensors, PLC's, supervision system, fast data acquisition system, etc.) and the Magnet Safety System (MSS) that protects the coils in case of quench. The paper will give an overview of the design of this large facility and the status of its realization.

Improvement of voltage holding capability in the 500 keV negative ion source for JT-60SA.

Science.gov (United States)

Tanaka, Y; Hanada, M; Kojima, A; Akino, N; Shimizu, T; Ohshima, K; Inoue, T; Watanabe, K; Taniguchi, M; Kashiwagi, M; Umeda, N; Tobari, H; Grisham, L R

2010-02-01

Voltage holding capability of JT-60 negative ion source that has a large electrostatic negative ion accelerator with 45 cm x 1.1 m acceleration grids was experimentally examined and improved to realize 500 keV, 22 A, and 100 s D- ion beams for JT-60 Super Advanced. The gap lengths in the acceleration stages were extended to reduce electric fields in a gap between the large grids and at the corner of the support flanges from the original 4-5 to 3-4 kV/mm. As a result, the voltage holding capability without beam acceleration has been successfully improved from 400 to 500 kV. The pulse duration to hold 500 kV reached 40 s of the power supply limitation.

Qualification and preparatory activities for the manufacturing of 9 TF coils of the JT-60SA magnet

International Nuclear Information System (INIS)

Cucchiaro, Antonio; Polli, Gian Mario; Cocilovo, Valter; Drago, Giovanni; Cuneo, Stefano; Terzi, Franco; Peyrot, Marc; Phillips, Guy; Tomarchio, Valerio

2013-01-01

In the framework of the Broader Approach Agreement for the construction of the JT-60SA tokamak, ENEA is in charge to provide 9 of the 18 Toroidal Field (TF) coils. The 9 coils are being manufactured by ASG superconductors in Genoa under the supervision of ENEA in collaboration with the JT-60SA European home team. Prior the manufacturing, a preparatory activity has been carried out aimed at designing, constructing and setting-up the relevant components to be realized. In order to get confidence of some special manufacturing process, several qualification activities have been performed. In this paper an overview of the principal milestones reached during the preparatory phase and a description of the qualification activities with relevant test results are presented

Marie Sklodowska-Curie, polonium, radium and radiochemistry

International Nuclear Information System (INIS)

Guillaumont, R.

2011-01-01

In this work, the author describes how the methodology developed by Marie Curie in discovering polonium and radium has contributed to greater scientific discoveries and how these discoveries have played a great part in the development of science in general and have particularly enriched chemistry. (O.M.)

Long Pulse Operation on NBI Systems for JT-60U

International Nuclear Information System (INIS)

Akino, N.; Ebisawa, N.; Honda, A.; Ikeda, Y.; Kawai, M.; Kazawa, M.; Mogaki, K.; Ohga, T.; Umeda, N.; Usui, K.; Yamamoto, T.; Grisham, L.

2005-01-01

In the neutral beam injection (NBI) system, an extension of the pulse duration up to 30 sec has been intended to study quasi-steady state plasma on JT-60U. The four positive-ion based (P-NBI) units, which tangentially inject neutral beam to plasma, were mainly modified on the electric power supplies and the beam limiters to extend the pulse duration up to 30 sec with 2 MW at 80 keV per each. The seven P-NBI units, each of which perpendicularly injects for 10 sec, were conducted to operate in series for the total pulse duration of 30 sec. The ion source of the negative-ion based (N-NBI) unit, whose target beam energy is 500 keV for 10 sec, was also modified to reduce the heat load of the grid for long pulse operation. The reduction of the re-ionization of the neutral beam in the beam drift duct was a key to achieve a long pulse injection. It was found that the pressure rise in the beam drift duct, which gives the re-ionization rate, depended on the temperature of the re-ionization plates during NBI injection. Up to now, it was attained successfully that the pulse duration of the tangential P-NBI unit was extended up to 30 sec. 310 MJ of the total integrated injection energy into JT-60U plasma was achieved, including the negative-ion based NBI operation for 17 sec at 366 keV

Põhja-Eesti Regionaalhaigla X-korpus = North-Estonian Regional Hospital X-wing / Mari Kurismaa ; intervjueerinud Margit Mutso

Index Scriptorium Estoniae

Kurismaa, Mari, 1956-

2011-01-01

Tallinnas Sütiste tee 19 asuva haigla juurdeehitise sisekujundusest. Sisearhitekt Mari Kurismaa (Stuudio Kurismaa OÜ). Arhitektid Indrek Suigusaar, Vivian Oruvee (AB Pluss OÜ). Infograafika autor Mari Kaljuste

ReUse Republic annab mõistele "uuskasutus" uue tähenduse / Tanel Veenre, Mari Klein

Index Scriptorium Estoniae

Veenre, Tanel, 1977-

2009-01-01

Moe- ja disainiagentuuri KalaMari uuest kaubamärgist ReUse Republic. Tegu on seisma jäänud brändirõivaste ümberdisainimise ja (uus)kasutusega. Projekti looja Mari Martin, kaasatud 15 eesti disainerit

Correlations between silicic volcanic rocks of the St Mary's Islands (southwestern India) and eastern Madagascar

DEFF Research Database (Denmark)

Melluso, Leone; Sheth, Hetu C.; Mahoney, John J.

2009-01-01

The St Mary's, Islands (southwestern India) expose silicic volcanic and sub-volcanic rocks (rhyolites and granophyric dacites) emplaced contemporaneously with the Cretaceous igneous province of Madagascar, roughly 88-90 Ma ago. I he St Mary's Islands rocks have phenocrysts of plagioclase...... and isotopic Compositions very close to those of rhyolites exposed between Vatomandry Ilaka and Mananjary in eastern Madagascar, and are distinctly different from rhyolites front other sectors of the Madagascan province. We therefore postulate that the St Mary's and the Vatomandry-Ilaka Mananjary silicic rock...

The Marie Curie Actions at CERN – reaching out beyond particle physics and Europe

CERN Document Server

EU Projects Office

2014-01-01

The European Commission’s Marie Curie Actions have been a pillar of the EU Framework Programmes for several decades as a means of promoting career development and enhancing mobility of researchers in Europe. This corresponds nicely to one of CERN’s main missions: to train the next generation of scientists and engineers.   The European Commissioner for Education, Culture, Multilingualism, Sport, Media and Youth, Androulla Vassiliou (centre) met the Marie Curie Fellows on her visit to CERN in April 2013. CERN has been pleased to be a major player in the Marie Curie Actions under the Sixth and Seventh Framework Programmes (FP6 from 2002 to 2006 and FP7 from 2007 to 2013), being one of the most successful participants in Europe. Under FP7, CERN was ranked first in Switzerland and fifth in Europe against stiff competition in terms of overall funding. Participation was in all of the Marie Curie Actions: Initial Training Networks, Industry-Academia Partnership Pathways, IRSES, CO...

Naine : masin või loom? / Maris Palgi

Index Scriptorium Estoniae

Palgi, Maris

2007-01-01

Eero Taltsi, Margus Kiisi, Maia Mölleri, Kaie Luige, Eva Orava ja Maris Palgi projektist "Maine-loom, naine-masin", mida tutvustati 2006. a. Moostes üritusel "Postsovkhoz 6", 2007. a. jaanuaris-veebruaris Tartu Kunstimajas ja Tartu Tampere Majas. Näitused avati E. Taltsi ja M. Kiisi loeng-performance'itega

Role of low order rational q values on the ITB-events in JT-60U plasmas

International Nuclear Information System (INIS)

Neudatchin, S.V.; Takizuka, T.; Hayashi, N.; Shirai, H.; Fujita, T.; Isayama, A.; Kamada, Y.; Koide, Y.; Suzuki, T.

2003-01-01

The formation of internal transport barriers (ITBs) near q=2,3 surfaces in normal (NrS) or optimized shear discharges of JT-60U and JET is well known. In reverse shear (RS) JT-60U plasmas, the role of q minimum (q min ) equal to 3, 5, 3, 2, 5, 2 is not obvious for ITB formation. ITB-events (non-local confinement bifurcations inside and around ITB in a ms timescale) are found in various JT-60U NrS and RS plasmas. Under sufficient power, ITB-events are seen at rational and not rational values of q min . The space-time evolution of T e and T i is similar even being strongly varied in space and time, suggesting same mechanism(s) of T e and T i transport. The temporal formation of strong ITB in H-mode under passing of q min =3 (after periodical improvements and degradations via ITB-events with 8ms period) in RS mode with P nbi =8MW is presented. Under smaller power, ITB-events are observed only at rational values of q min . In a weak RS shot with P nbi =4MW, abrupt rise of T e is seen at q min =3.5, while more cases of T i rise are observed. The difference of the T e and T i evolution seen regularly under the low power, suggests decoupling of T e and T i transport. (author)

Role of low order rational q values in the ITB-events in JT-60U plasmas

International Nuclear Information System (INIS)

Neudatchin, S.V.

2002-01-01

The formation of internal transport barriers (ITBs) near q=2,3 surfaces in normal (NrS) or optimized shear discharges of JT-60U and JET is well known. In reverse shear (RS) JT-60U plasmas, the role of q minimum (q min ) equal to 3.5, 3, 2.5, 2 is not obvious for ITB evolution. ITB-events (non-local confinement bifurcations inside and around ITB in a ms timescale) are found in various JT-60U NrS and RS plasmas. (a) Under sufficient power, ITB-events are seen at rational and not rational values of q min . The space-time evolution of Te and Ti is similar. The temporal creation of stronger ITB in H-mode (after periodical improvements and degradations via ITB-events with 8 ms period) under passing of q min = 3 is presented (P nbi = 8 MW, 1.5 MA / 3.7 T). (b) Under smaller power, the influence of some rational q min is seen clearly for ITB-events on T e . In 1.3MA/3.7T shot with very weak RS (Pnbi = 4 MW), abrupt rise of T e is seen at q min 3:5, while more cases of T i rise are observed. (c) The possible role of MHD-activity as ITB-events trigger (ms time scale correlation in some NrS and RS cases) is under investigation. (author)

Mariátegui entre dois mundos: Visões do comunitarismo indígena andino

Directory of Open Access Journals (Sweden)

Cristhian Teófilo da Silva

2014-12-01

Full Text Available Resumo  Este artigo visa demonstrar que a presença da herança andina no projeto de socialismo “indo-americano” de Mariátegui gerou uma tensão epistemológica original e crítica do pensamento social marxista na América Latina. A partir desta releitura da perspectiva mariateguiana apoiada em duas vertentes, indigenista peruana e marxista europeia, o presente artigo afirma a importância dos estudos sobre o indigenismo para a compreensão dos limites do socialismo de orientação marxista no Peru. O artigo será concluído ressaltando a importância do socialismo indo-americano de Mariátegui para a “descoberta” da constituição híbrida do modo de produção peruano.  Palavras-chave  Indigenismo; marxismo; Peru; José Carlos Mariátegui  --- Resumen  Este artículo tiene como objetivo demostrar que la presencia de la herencia andina en el diseño del socialismo "indoamericano" de Mariátegui ha generado una crítica epistemológica original del pensamiento social marxista en América Latina. De este recuento la perspectiva de Mariátegui apoyada en dos frentes, indigenista peruana y marxista europea, este artículo defiende la importancia de los estudios sobre el indigenismo para la comprensión de los límites del socialismo marxista en el Perú. El artículo concluirá destacando la importancia del socialismo indo-americano de Mariátegui en el "descubrimiento" de la constitución híbrida del modo de producción peruana.  Palabras clave  Indigenismo; marxismo; Perú; José Carlos Mariátegui --- Abstract This article aims to demonstrate that the presence of the Andean heritage in Mariátegui's "Indo-American" socialist project generated a new and critical epistemological tension of the Marxist social thinking in Latin America. From this mariateguian retelling, which is established in two ways, Peruvian indigenous and European Marxist, this article maintains the importance of studies on the indigenous movement to understand

Igal mõisal on oma lugu / Mari-Ann Remmel

Index Scriptorium Estoniae

Remmel, Mari-Ann

2008-01-01

Kirjastuselt "Tänapäev" ilmus raamat "Mõisalegendid. Harjumaa", koostaja Mari-Ann Remmel, kujundaja Angelika Schneider. Kogumik sisaldab ka ajaloolist ning genealoogilist teavet mõisahoonete ning -omanike kohta

Eesti NATO ukselävel / Mari-Ann Kelam

Index Scriptorium Estoniae

Kelam, Mari-Ann, 1946-

2002-01-01

Seda, et NATO liitumisläbirääkimistele kutsutavate seas on ka Eesti, saab veel tänagi pidada üheks meie iseseisva riikluse suursaavutuseks, kui mitte imeks, kirjutab Riigikogu liige Mari-Ann Kelam. Autor: Isamaaliit. Parlamendisaadik

Mary Shelley's Frankenstein: what made the Monster monstrous?

Science.gov (United States)

Britton, Ronald

2015-02-01

This paper discusses the genesis of the famous story of Frankenstein which arose from a dream experienced by Mary Shelley whilst on a holiday shared with her husband Percy Shelley, Lord Byron, Dr Polidori and her step sister Claire Clairmont. The novel relates how the creature created by Victor Frankenstein horrifies him, is rejected by him and called a monster. The monster's ensuing despair and subsequent murderousness is eloquently described. The whole book is clearly connected to Mary Shelley's experience as an infant whose mother died after giving birth to her and her subsequent loss, as a mother, of her own new born infant. It is suggested that the novel imaginatively describes what it is to have been primarily rejected as an infant and to feel regarded as a monster. © 2015, The Society of Analytical Psychology.

Avoidance of VDEs during plasma current quench in JT-60U

International Nuclear Information System (INIS)

Yoshino, R.; Nakamura, Y.; Neyatani, Y.

1996-01-01

Vertical displacement events (VDEs) during plasma current quench (I p quench) are one of the serious problems encountered in designing tokamak fusion reactors, owing to the generation of enormously high electromagnetic forces on the vacuum vessel and in-vessel components, but they have been passively and actively avoided in JT-60U. In JT-60U 'slow I p quench' is ended with very fast plasma current termination (final I p termination), and the halo current is frequently measured at this final I p termination. VDEs make the final I p termination severe by increasing the halo current and the electromagnetic force. A strong dependence of VDE growth rate on the initial vertical position of the plasma current centre (Z J ) has been clarified experimentally, and a neutral point of Z J for VDE has been found at ∼ 15 cm above the midplane of the vacuum vessel. According to these measurements, VDE has been avoided by the selection of Z J at the start of I p quench (passive control) and by the control of Z J during I p quench (active control) eventually obtained owing to the small deviation of Z J in real time calculations from its actual value. Furthermore, passive avoidance of VDEs by the injection of a neon ice pellet has been demonstrated. (author). 29 refs, 14 figs

Näitused / Mari Sobolev

Index Scriptorium Estoniae

Sobolev, Mari, 1968-

1998-01-01

Rotermanni soolaladu. "Elektrokardiogramm" (tegevuskunsti üritus); Vaal-galerii. Antoni T̉pies "Litograafiaid aastatest 1973-1995"; Mari Kadanik, Eero Barndõk, Rain Ader "Pildid" (maalid); Paldiski Põhikool. "Niemenlautta ja Hugo Simbergi fotod" (soome kunstniku fotode koopiad, pildistatud enne 1915. a.; Kullo lastegalerii. Neli uut näitust.(lastekunst); Arhitektuurimuuseum. Arnold Matteus - Tartu linna arhitekt (juubelinäitus), Alvar Aalto "Kolm objekti Eestis"; Linnagalerii Tallinnas. "Valge" (ruumi- ja moekunsti näitus); Sammas-galerii. Jüri Jegorow "Insect" (arvutigraafika); Endla Teatri palmisaal. "Muzik in der Kunst" (Tallinna kunstitudengite näitus); Eesti Rahvusraamatukogu. Õie Kütt "Uued ja vanad ehted"

Mary Bidwell Breed: The Educator as Dean.

Science.gov (United States)

Fley, Jo Ann; Jaramillo, George R.

1979-01-01

Mary Bidwell Breed predicted that midwestern universities would probably "pass through a stage of educational development in which the liberal arts are entirely feminized, the men are entirely commercialized." We can appreciate how close she came to pinpointing trends which did not begin to be reversed until sixty years later.…

Mary McAuliffe. Twilight of the Belle Epoque: The Paris of Picasso, Stravinsky, Proust, Renault, Marie Curie, Gertrude Stein, and Their Friends through the Great War. Lanham, MD: Rowman and Littlefield. 2014. vii + 418 pp.

Directory of Open Access Journals (Sweden)

Eric Martone

2015-01-01

Full Text Available Review of Mary McAuliffe. Twilight of the Belle Epoque: The Paris of Picasso, Stravinsky, Proust, Renault, Marie Curie, Gertrude Stein, and Their Friends through the Great War . Lanham, MD: Rowman and Littlefield. 2014. vii + 418 pp.

Paying tribute to florence nightingale and Mary Seacole.

Science.gov (United States)

Grainger, Angela

2012-05-30

Lynn McDonald (letters May 16) says the grounds of St Thomas' Hospital in London are the wrong place for the proposed memorial statue to Mary Seacole, pointing out that the hospital is more associated with Florence Nightingale and her work.

Mutacin H-29B is identical to mutacin II (J-T8

Directory of Open Access Journals (Sweden)

Lavoie Marc C

2006-04-01

Full Text Available Abstract Background Streptococcus mutans produces bacteriocins named mutacins. Studies of mutacins have always been hampered by the difficulties in obtaining active liquid preparations of these substances. Some of them were found to be lantibiotics, defined as bacterial ribosomally synthesised lanthionine-containing peptides with antimicrobial activity. The goal of this study was to produce and characterize a new mutacin from S. mutans strain 29B, as it shows a promising activity spectrum against current human pathogens. Results Mutacin H-29B, produced by S. mutans strain 29B, was purified by successive hydrophobic chromatography from a liquid preparation consisting of cheese whey permeate (6% w/v supplemented with yeast extract (2% and CaCO3 (1%. Edman degradation revealed 24 amino acids identical to those of mutacin II (also known as J-T8. The molecular mass of the purified peptide was evaluated at 3246.08 ± 0.1 Da by MALDI-TOF MS. Conclusion A simple procedure for production and purification of mutacins along with its characterization is presented. Our results show that the amino acid sequence of mutacin H-29B is identical to the already known mutacin II (J-T8 over the first 24 residues. S. mutans strains of widely different origins may thus produce very similar bacteriocins.

Edith Marie Thompson (1877–1961), sports and empire settlement administrator

OpenAIRE

Williams, Jean

2012-01-01

Thompson, Edith Marie (1877–1961), sports and empire settlement administrator, was born at 44 Russell Road, Kensington, London, on 19 May 1877, the only daughter of William Frederic Thompson (1847/8–1921), barrister and mineral and chemical merchant, and his wife, Marie Charlotte, née Warde (1849/50–1900). She was educated at Norland Place School and was a boarder at Cheltenham Ladies' College in 1892–3, at a period when there was still very little sport played at the school. In January 1895,...

Effect of halo current and its toroidal asymmetry during disruptions in JT-60U

International Nuclear Information System (INIS)

Neyatani, Y.; Yoshino, R.; Ando, T.

1995-01-01

A poloidal halo current due to a vertical displacement event (VDE) is observed in experimentally simulated VDE discharges and density limit disruptions in the JT-60U tokamak. In the case of a clockwise I p and B T discharge, the halo current flows into the vacuum vessel from the inside separatrix and goes back to the plasma from the outside separatrix. A maximum halo current is produced by a change in the poloidal flux generated by plasma current decay. A toroidal asymmetry factor of 2.5 is estimated from the requirements of the fracture of the carbon-fiber composite tiles. The toroidal asymmetry is caused by the poloidal field (PF) that is produced by the toroidal field (TF) ripple, the deformation of the vacuum vessel, the setting error between the vacuum vessel and the TF and PF coils, the low-n mode during current quench, etc. To consider this asymmetry, in JT-60U, one must estimate the total halo current as nearly 26% of the plasma current just before a current quench. 25 refs., 10 figs

Classroom Instruction: The Influences of Marie Clay

Science.gov (United States)

McNaughton, Stuart

2014-01-01

Marie Clay's body of work has influenced classroom instruction in direct and indirect ways, through large overarching themes in our pedagogical content knowledge as well as specific smart practices. This paper focuses on her the contributions to our thinking about instruction which come from two broad theoretical concepts; emergent literacy…

Läbi legendide William Shakespeare'i poole / Maris Peters

Index Scriptorium Estoniae

Peters, Maris

2010-01-01

Tutvustus: Wells, Stanley. Kas on tõsi, et Shakespeare ...? / tõlkinud Maris Peters. Tallinn : Argo, 2010. Raamat William Shakespeare kohta käivatest legendidest, kuuldustest ja teooriatest ning tema teoste autorsusest

Anne-Marie Sargueil: ilu on kasulik / intervjueerinud Emilie Toomela

Index Scriptorium Estoniae

Sargueil, Anne-Marie

2015-01-01

Prantsuse Disainiinstituudi juht Anne-Marie Sargueil rääkis prantsuse ja skandinaavia disainist, prantslaste disainieelistustest, uutest suundadest disaini valdkonnas, Eesti Tarbekunsti- ja Disainimuuseumis avatud näitusest "20 prantsuse disainiikooni"

The plasma movie database system for JT-60

International Nuclear Information System (INIS)

Sueoka, Michiharu; Kawamata, Yoichi; Kurihara, Kenichi; Seki, Akiyuki

2007-01-01

The real-time plasma movie with the computer graphics (CG) of plasma shape is one of the most effective methods to know what discharge have been made in the experiment. For an easy use of the movie in the data analysis, we have developed the plasma movie database system (PMDS), which automatically records plasma movie according to the JT-60 discharge sequence, and transfers the movie files on request from the web site. The file is compressed to about 8 MB/shot small enough to be transferred within a few seconds through local area network (LAN). In this report, we describe the developed system from the technical point of view, and discuss a future plan on the basis of advancing video technology

Entrevista com Marie Raynal, Redatora chefe da Revista Diversité - França (Tradução. Interview with Marie Raynal, editor of Diversité - France (Translation

Directory of Open Access Journals (Sweden)

Abramowicz, Anete

2009-11-01

Full Text Available A Revista Eletrônica de Educação teve o privilégio de entrevistar Marie Raynal, que apesar de muitas atividades nos concedeu um tempo para nos responder. Marie Raynal é Responsável pelo Departamento Ville-Ecole-Intégration (Cidade-Escola-Integração em Montrouge, França e Redatora Chefe (rédactrice em chef da Revista Diversité que é um dos únicos periódicos da educação na França que acolhe artigos sobre a diversidade social. Em 2003 foi criado o departamento “Ville & Education” sob a coordenação de Marie Raynal. Este departamento tem por missão acompanhar todos os atores da educação (professores, quadros da educação, coletividades, associações, etc. que tem por encargo - durante e fora do tempo escolar - as crianças e os jovens em situação de fragilidade, especialmente aqueles que vivem nos bairros da política da cidade, àqueles que se destacam por uma educação prioritária, os recém chegados na França e as crianças nômades. No conjunto destas questões, este departamento é considerado como expert nacional. Este departamento possui três revistas e uma carta de informação, entre elas está a revista trimestral em Ciências Sociais, a Diversité.The Revista Eletrônica de Educação (Electronic Journal of Education has the privilege to interview Marie Raynal, which although having many activities, dedicated us time to answer it. Marie Raynal is head of the Département de Ville-Ecole-Intégration (Department of City-School-Integration in Montrouge, France and Chief editor of the journal Diversité, which includes articles on social diversity. In 2003, the department "Ville & Education" is created under the authority of Marie Raynal. Its mission is to accompany all education members (teachers, education managers, communities, associations, etc. that are in charge, during and after school time, children and youth in situations of fragility, including those living in neighborhood of the city policy, those

Costume Cinema and Materiality Telling the Story of Marie Antoinette through Dress

OpenAIRE

Therése Andersson

2011-01-01

In ‘Costume Cinema and Materiality: Telling the Story of Marie Antoinette through Dress’ a materiality-based approach for analysing film narratives through costumes is examined. Sofia Coppola’s film Marie Antoinette (2006) serves as the empirical starting point and the theme of dressing and redressing is pursued throughout the film, crystallizing costume as a significant feature for reading the movie. The article argues that costumes, on a symbolic level, work as agents. It thus focuses on th...

Raamatukogu esisele kerkib kevadel Marie Underi kuju / Andres Eilart

Index Scriptorium Estoniae

Eilart, Andres

2009-01-01

Skulptor Mati Karminil ja arhitekt Tiit Trummalil valmib valgest marmorist mälestusmärk Marie Underile. Kuju püstitatakse 2010. a. kevadel Eesti Rahvusraamatukogu ette. Alale on kavandatud ka veekaskaadid

Design and characteristics of the drive mechanism for movable limiters of JT-60, (1)

International Nuclear Information System (INIS)

Takashima, Tetsuo; Morishita, Osamu; Yamamoto, Masahiro; Shimizu, Masatsugu; Ohta, Mitsuru

1976-10-01

Two fast-acting movable rail limiters will be installed in a large Tokamak JT-60 being designed in JAERI. The movable limiter consists of a drive mechanism, a vacuum seal, a bearing, and a molybdenum rail limiter. Design of the drive mechanism for the movable limiter and experimental results on the driving characteristics in full scale are described. (auth.)

Heat analysis of the magnetic limiter plate for JT-60

International Nuclear Information System (INIS)

Nakamura, Hiroo; Ninomiya, Hiromasa; Shimizu, Masatsugu; Ohta, Mitsuru

1977-03-01

Heat analysis has been made of the magnetic limiter plate for JT-60. Test materials of the magnetic limiter plate are molybdenum, graphite, pyrolytic graphite and silicon carbide. It is assumed in calculation of the heat analysis that 10MW is deposited on the 2 cm wide surface of the magnetic limiter plate in about 10 sec. The magnetic limiter plate of pyrolytic graphite is a stack of pyrolytic graphite sheets, heat input is in the deposition plane to take advantage of the large heat conductivity along this plane. Pyrolytic graphite is the best in terms of temperature rise. The temperature of molybdenum and graphite rise up to 1800 0 C and 620 0 C, respectively, in an deposition of 10 MWx10sec. Silicon carbide is not suitable for the magnetic limiter plate. Because the plasma of the JT-60 discharges every 10 min, the average heat flux decreases to 17 w/cm 2 during the each interval. When the magnetic limiter plate has the above heat inflow, a maximum of above 1000 0 C occurs at the edge far from the joint to the thick ring of the vacuum vessel. To reduce heat load of the magnetic limiter plate, an alternating current (2 -- 5Hz) is superposed on the magnetic limiter coil current. The intersection of separatrix line and magnetic limiter plate then moves cyclically more than 10 cm. Concerning temperature distribution of the multi-groove magnetic limiter plate, its dimensions are determined by the limitation in vapor pressure to prevent the impurity inflow. (auth.)

Advanced tokamak research with integrated modeling in JT-60 Upgrade

International Nuclear Information System (INIS)

Hayashi, N.

2010-01-01

Researches on advanced tokamak (AT) have progressed with integrated modeling in JT-60 Upgrade [N. Oyama et al., Nucl. Fusion 49, 104007 (2009)]. Based on JT-60U experimental analyses and first principle simulations, new models were developed and integrated into core, rotation, edge/pedestal, and scrape-off-layer (SOL)/divertor codes. The integrated models clarified complex and autonomous features in AT. An integrated core model was implemented to take account of an anomalous radial transport of alpha particles caused by Alfven eigenmodes. It showed the reduction in the fusion gain by the anomalous radial transport and further escape of alpha particles. Integrated rotation model showed mechanisms of rotation driven by the magnetic-field-ripple loss of fast ions and the charge separation due to fast-ion drift. An inward pinch model of high-Z impurity due to the atomic process was developed and indicated that the pinch velocity increases with the toroidal rotation. Integrated edge/pedestal model clarified causes of collisionality dependence of energy loss due to the edge localized mode and the enhancement of energy loss by steepening a core pressure gradient just inside the pedestal top. An ideal magnetohydrodynamics stability code was developed to take account of toroidal rotation and clarified a destabilizing effect of rotation on the pedestal. Integrated SOL/divertor model clarified a mechanism of X-point multifaceted asymmetric radiation from edge. A model of the SOL flow driven by core particle orbits which partially enter the SOL was developed by introducing the ion-orbit-induced flow to fluid equations.

Development of residual thermal stress-relieving structure of CFC monoblock target for JT-60SA divertor

Energy Technology Data Exchange (ETDEWEB)

Tsuru, Daigo, E-mail: tsuru.daigo@jaea.go.jp; Sakurai, Shinji; Nakamura, Shigetoshi; Ozaki, Hidetsugu; Seki, Yohji; Yokoyama, Kenji; Suzuki, Satoshi

2015-10-15

Highlights: • We carried out numerical simulations on residual thermal stress of targets for the JT-60SA divertor. • We developed three measures to reduce residual thermal stress. • We proposed two structures of CFC monoblock target for the JT-60SA divertor. • We confirmed the effectiveness of the structure by infrared thermography inspection and high heat flux test. - Abstract: Carbon fibre-reinforced carbon composite (CFC) monoblock target for JT-60SA divertor is under development towards the mass-production. CFC monoblocks, WCu interlayers and a CuCrZr cooling tube at the centre of the monoblocks were bonded by vacuum brazing in a high temperature, to a target. If residual thermal stress due to difference of thermal expansions between CFC and CuCrZr exceeds the maximum allowable stress of the CFC after the bonding, cracks are generated in the CFC monoblock and heat removal capacity of the target degrades. In this paper, new structures of the targets were proposed, to reduce residual thermal stress and to mitigate the degradation of heat removal capacity of the targets. Some measures, including slitting of the CFC monoblock aside of the cooling tube, replacement of the interlayer material and shifting the position of the cooling tube, were implemented. The effectiveness of the measures was evaluated by numerical simulations. Target mock-ups with the proposed structures were manufactured. Infrared thermography inspection and high heat flux test were carried out on the mock-ups in order to evaluate the heat removal capacity.

Energy confinement in JT-60 lower hybrid current driven plasmas

International Nuclear Information System (INIS)

Ushigusa, K.; Imai, T.; Naito, O.; Ikeda, Y.; Tsuji, S.; Uehara, K.

1990-01-01

The energy confinement in high power lower hybrid current driven (LHCD) plasmas has been studied in the JT-60 tokamak. At a plasma current of 1 MA, the diamagnetically estimated energy confinement time in LHCD plasmas has almost the same value as the confinement time in ohmically heated plasmas at n-bar e ∼ 1.0x10 19 m -3 . The confinement time of high power LHCD plasmas (P LH E varies as to P LH α n e β I p 0 with α + β ∼ -0.3. (author). Letter-to-the-editor. 12 refs, 5 figs

Charcot-Marie-Tooth disease type 1A

DEFF Research Database (Denmark)

Hertz, Jens Michael; Børglum, A D; Brandt, C A

1994-01-01

Charcot-Marie-Tooth disease type 1A (CMT1A) is an autosomal dominant peripheral neuropathy associated with a DNA duplication on chromosome 17p11.2-p12 in the majority of cases. Most of the sporadic cases are due to a de novo duplication. We have screened for this duplication in 11 Danish patients...

Magnetic Fluctuations during plasma current rise of divertor discharge in JT-60

International Nuclear Information System (INIS)

Ushigusa, Kenkichi; Kikuchi, Mitsuru; Hosogane, Nobuyuki; Tsuji, Syunji; Hayashi, Kazuo.

1986-03-01

During a current rise phase in the JT-60 divertor discharge, a series of magnetic fluctuations which do not rotate poloidally (phase-locking) is observed. They cause a cooling of plasma periphery and an enhancement of H α emission in the divertor chamber. A significant increase in β P + 1 i /2 with minor disruptions during the phase-locked magnetic fluctuation suggests a relaxation of the current profile in the current rise phase of the divertor discharge. (author)

The design and research of anti-color-noise chaos M-ary communication system

Energy Technology Data Exchange (ETDEWEB)

Fu, Yongqing, E-mail: fuyongqing@hrbeu.edu.cn; Li, Xingyuan; Li, Yanan [College of information and Communication Engineering, Harbin Engineering University, Harbin 150001 (China); Zhang, Lin [College of Underwater Acoustic Engineering, Harbin Engineering University, Harbin 150001 (China)

2016-03-15

Previously a novel chaos M-ary digital communication method based on spatiotemporal chaos Hamilton oscillator has been proposed. Without chaos synchronization circumstance, it has performance improvement in bandwidth efficiency, transmission efficiency and anti-white-noise performance compared with traditional communication method. In this paper, the channel noise influence on chaotic modulation signals and the construction problem of anti-color-noise chaotic M-ary communication system are studied. The formula of zone partition demodulator’s boundary in additive white Gaussian noise is derived, besides, the problem about how to determine the boundary of zone partition demodulator in additive color noise is deeply studied; Then an approach on constructing anti-color-noise chaos M-ary communication system is proposed, in which a pre-distortion filter is added after the chaos baseband modulator in the transmitter and whitening filter is added before zone partition demodulator in the receiver. Finally, the chaos M-ary communication system based on Hamilton oscillator is constructed and simulated in different channel noise. The result shows that the proposed method in this paper can improve the anti-color-noise performance of the whole communication system compared with the former system, and it has better anti-fading and resisting disturbance performance than Quadrature Phase Shift Keying system.

The design and research of anti-color-noise chaos M-ary communication system

International Nuclear Information System (INIS)

Fu, Yongqing; Li, Xingyuan; Li, Yanan; Zhang, Lin

2016-01-01

Previously a novel chaos M-ary digital communication method based on spatiotemporal chaos Hamilton oscillator has been proposed. Without chaos synchronization circumstance, it has performance improvement in bandwidth efficiency, transmission efficiency and anti-white-noise performance compared with traditional communication method. In this paper, the channel noise influence on chaotic modulation signals and the construction problem of anti-color-noise chaotic M-ary communication system are studied. The formula of zone partition demodulator’s boundary in additive white Gaussian noise is derived, besides, the problem about how to determine the boundary of zone partition demodulator in additive color noise is deeply studied; Then an approach on constructing anti-color-noise chaos M-ary communication system is proposed, in which a pre-distortion filter is added after the chaos baseband modulator in the transmitter and whitening filter is added before zone partition demodulator in the receiver. Finally, the chaos M-ary communication system based on Hamilton oscillator is constructed and simulated in different channel noise. The result shows that the proposed method in this paper can improve the anti-color-noise performance of the whole communication system compared with the former system, and it has better anti-fading and resisting disturbance performance than Quadrature Phase Shift Keying system.

Mary Tyler Moore Helps Launch NIH MedlinePlus Magazine

Science.gov (United States)

... Issues Mary Tyler Moore Helps Launch NIH MedlinePlus Magazine Past Issues / Winter 2007 Table of Contents For ... Javascript on. Among those attending the NIH MedlinePlus magazine launch on Capitol Hill were (l-r) NIH ...

Mari Koger : seina sisse ehitatud akvaariumiga poissmehekodu / Gitte Hint

Index Scriptorium Estoniae

Hint, Gitte

2003-01-01

80-ruutmeetrine poissmehekorter Viimsi uues elamus. Elutoa ja vannitoa vahelises seinas paikneb kahelt poolt vaadeldav akvaarium. Magamistoa üks seintest on ehitatud vanadest tellistest. Sisearhitekt Mari Koger, tema kommentaarid. Ill.: plaan, 9 värv. vaadet

Rehabilitation programme for the Mary Kathleen uranium mine

International Nuclear Information System (INIS)

Duffield, I.R.; Ward, T.A.

1989-01-01

The Mary Kathleen uranium deposit was located in the North West region of the state of Queensland, Australia. It was discovered in 1954 and mined in two phases for a total of twelve years between 1958 and 1982. In October 1982 operations at the site ceased with the deposit virtually exhausted and all contractual commitments completed. From the outset, a site specific approach was adopted in developing the rehabilitation plan. Other sites'experience was evaluated but was adopted only if appropriate for Mary Kathleen. As a result of this approach a conceptual solution was established for each area within the site. Each solution was then used as the basis for detailed planning for rehabilitation of that area. The rehabilitation program commenced in mid 1982 and was completed in late 1985. Results of monitoring provided a strong basis for confidence that the objectives of the plan have been met, and allowed for the relinquishment of all the remaining mining leases in August 1987

Examples of data processing systems. Data processing system for JT-60

International Nuclear Information System (INIS)

Aoyagi, Tetsuo

1996-01-01

JT-60 data processing system is a large computer complex system including a lot of micro-computers, several mini-computers, and a main-frame computer. As general introduction of the original system configuration has been published previously, some improvements are described here. Transient mass data storage system, network database server, a data acquisition system using engineering workstations, and a graphic terminal emulator for X-Window are presented. These new features are realized by utilizing recent progress in computer and network technology and carefully designed user interface specification of the original system. (author)

Numerical analysis of gas puff modulation experiment on JT-60U

International Nuclear Information System (INIS)

Nagashima, Keisuke; Sakasai, Akira

1992-03-01

In tokamak transport physics, source modulation experiments are one of the most effective methods. For an analysis of these modulation experiments, a simple numerical method was developed to solve the general transport equations. This method was applied to gas puff modulation experiments on JT-60U. From the comparison between the measured and calculated density perturbations, it was found that the particle diffusion coefficient is about 0.8 m 2 /sec in the edge region and 0.1-0.2 m 2 /sec in the central region. (author)

Numerical simulation on current spike behaviour of JT-60U disruptive plasmas

International Nuclear Information System (INIS)

Takei, N; Nakamura, Y; Tsutsui, H; Yoshino, R; Kawano, Y; Ozeki, T; Tobita, K; Tsuji-Iio, S; Shimada, R; Jardin, S C

2004-01-01

Characteristics and underlying mechanisms for plasma current spikes, which have been frequently observed during the thermal quench of JT-60U disruptions, were investigated through tokamak simulation code simulations including the passive shell effects of the vacuum vessel. Positive shear and reversed shear (PS and RS) plasmas were shown to have various current spike features in the experiments, e.g. an impulsive increase in the plasma current (positive spike) in the majority of thermal quenches, and a sudden decrease (negative spike), that has been excluded from past consideration, as an exception. It was first clarified that the shell effects, which become significant especially at a strong pressure drop due to the thermal quench of high β p plasmas, play an important role in the current spike in accordance with the initial relation of the radial location between the plasma equilibria and the vacuum vessel. As a consequence, a negative current spike may appear at thermal quench when the plasma is positioned further out from the geometric centre of the vacuum vessel. It was also pointed out that a further lowering in the internal inductance, in contradiction to previous interpretation in the past, is a plausible candidate for the mechanism for positive current spikes observed even in RS plasmas. The new interpretation enables us to reason out the whole character of current spikes of JT-60U disruptions

Mariátegui e a ocidentalização da política Mariátegui and the occidentalization of politics

Directory of Open Access Journals (Sweden)

Ricardo Melgar Bao

2007-05-01

Full Text Available A contribuição de Mariátegui para pensar o socialismo na América Latina é resgatada por meio das críticas à marginalização cultural e política dos povos não-ocidentais, bem como do particular uso que deu ao marxismo, acentuando-lhe as características universais através da apropriação cultural dos diversos contextos. Palavras-chave: América Latina. Oriente. Ocidente. Marxismo. Socialismo. Civilização. Cultura. Identidade. The contribution of Mariátequi for the view of socialism in Latin America is recovered not only through the criticism of the cultural and political marginal position of the non-western people but also through the particular way he used marxism, reinforcing its universal characteristics by the cultural appropriation of different cultural contexts. Keywords: Latin America. East. West. Marxism. Socialism. Civilization. Culture. Identity.

Steady-state exhaust of helium ash in the W-shaped divertor of JT-60U

International Nuclear Information System (INIS)

Sakasai, A.; Takenaga, H.; Hosogane, N.

2001-01-01

By injecting a neutral beam of 60 keV helium (He) atoms as central fueling of helium into the ELMy H-mode plasmas, helium exhaust has been studied in the W-shaped pumped divertor on JT-60U. Efficient He exhaust was realized by He pumping using argon frosted cryopumps in the JT-60U new divertor. In steady state, good He exhaust capability (τ He */τ E =4 and high enrichment factor, where τ He * is a global particle confinement time of helium and τ E is the energy confinement time) was successfully demonstrated in attached ELMy H-mode plasmas. Good He exhaust capability was also obtained in detached ELMy H-mode plasmas, which was comparable to one in attached plasmas. This result of the helium exhaust is sufficient to support a detached divertor operation on ITER. After the divertor modification, helium exhaust in reversed shear plasmas has been investigated using He gas puff. Helium removal inside the internal transport barrier (ITB) is about two times as difficult as that outside the ITB in reversed shear discharges. (author)

Doktoritööd : [2007, Anne Lange jt.

Index Scriptorium Estoniae

2007-01-01

20. veebr. kaitseb Anne Lange doktoritööd "The poetics of translation of Ants Oras". 19. jaan. kaitses Tuuli Oder doktoritööd "The model of contemporary professional foreign language teacher". 16. jaan. kaitses Tiit Maran doktoritööd "Conservation biology of the European mink, Mustela lutreola (Linnaeus 1761): decline and causes of extinction". 12. jaan. kaitses Maris Saagpakk doktoritööd "Deutschbaltische Autobiographien als Dokumente des Zeit- und Selbstempfindens: vom Ende des 19. Jh. bis zur Umsiedlung 1939"

Resistive instabilities in reversed shear discharges and wall stabilization on JT-60U

International Nuclear Information System (INIS)

Takeji, S.; Tokuda, S.; Fujita, T.; Suzuki, T.; Isayama, A.; Ide, S.; Ishii, Y.; Kamada, Y.; Koide, Y.; Matsumoto, T.; Oikawa, T.; Ozeki, T.; Sakamoto, Y.

2001-01-01

Resistive instabilities and wall stabilization of ideal low toroidal mode number, n, kink modes are investigated in JT-60U reversed shear discharges. Resistive interchange modes with n=1 are found to appear in reversed shear discharges with large pressure gradient at the normalized beta, β N , of about unity or even lower. The resistive interchange modes appear as intermittent burst-like magnetohydrodynamic (MHD) activities and higher n≤3 modes are observed occasionally in higher β N regime. No clear degradation of the plasma stored energy is observed by the resistive interchange modes themselves. It is also found that resistive interchange modes can lead to major collapse owing to a coupling with tearing modes at the outer mode rational surface over the minimum safety factor. Stability analysis revealed that stability parameter of tearing modes, Δ' , at the outer mode rational surface is affected by the free-boundary condition. The result is consistent with the experimental evidence that major collapse tends to occur when plasma edge safety factor, q*, is near integer values. Stabilization of ideal low n kink modes by the JT-60U wall is demonstrated. Magnetohydrodynamic perturbations that are attributed to resistive wall modes are observed followed by major collapse in wall-stabilized discharges. (author)

33 CFR 207.440 - St. Marys Falls Canal and Locks, Mich.; use, administration, and navigation.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false St. Marys Falls Canal and Locks... CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE NAVIGATION REGULATIONS § 207.440 St... include all of the natural waters of the St. Marys River on the U.S. side of the International Boundary...

Marie Curie: In the laboratory and on the battlefield

International Nuclear Information System (INIS)

Badash, Lawrence

2003-01-01

This year is the centennial of the Nobel Prize in Physics shared by Henri Becquerel and the Curies for their pioneering work on radioactivity. But Marie Curie's contribution to the medical use of x rays is not widely known

Exploring the Universe with John Milton and Mary Shelley.

Science.gov (United States)

Poston, David

1989-01-01

Presents an approach to teaching John Milton's "Paradise Lost" in conjunction with Mary Shelley's "Frankenstein." Notes that a study of these works stimulates vigorous discussions on theological and moral issues, human nature, and the cultural past and future. (MM)

Reklaamid nagu kino / Jean Marie Bouriscot ; interv.Valner Valme

Index Scriptorium Estoniae

Bouriscot, Jean Marie

2001-01-01

Sakala keskuses toimus reedel 6. korda reklaamiõgijate öö, kus näidati reklaamiklippe Jean Marie Bouriscotþ kogust. Kogu omanik polnud küll seekord ise kohal, kuid vastas siiski ajakirjaniku küsimustele oma huviala kohta

Üleujutus arendaja hingel / Maris Kuuda

Index Scriptorium Estoniae

Kuuda, Maris

2007-01-01

Kohalikel omavalitsustel pole piisavalt hoobasid sundida arendajaid üleujutusohuga arvestama. Pärnusse hotelli September rajajad (arhitektid Emil Urbel, Andrus Mark) arvestavad ujutusohuga. Arvamust avaldavad Rene Reisner, Mari Sepp, Ülo Sults, Karri Tiigisoon, Indrek Rannik, Mark Soosaar, Tiiu Pärn, Merle Looring, Rita Sepp, Kaspar Alles. Keskkonnaministeeriumi plaanist muuta veeseadust, mis sunniks ehitajaid ja arendajaid arvestama üleujutusohuga. Lisadena olulise üleujutusohuga alad Eestis ning üleujutuste ohjamist käsitleva Euroopa Liidu direktiivi eelnõust

Edge pedestal characteristics in JET and JT-60U tokamaks under variable toroidal field ripple

NARCIS (Netherlands)

Urano, H.; Saibene, G.; Oyama, N.; Parail, V.; P. de Vries,; Sartori, R.; Kamada, Y.; Kamiya, K.; Loarte, A.; Lonnroth, J.; Sakamoto, Y.; Salmi, A.; Shinohara, K.; Takenaga, H.; Yoshida, M.

2011-01-01

The effects of toroidal field (TF) ripple on the edge pedestal characteristics were examined in the TF ripple scan experiments at the plasma current I(p) of 1.1 MA in JET and JT-60U. The TF ripple amplitude delta(R) was defined as a value averaged over the existing ripple wells at the separatrix on

Reference design of the power supply system for the resistive-wall-mode control in JT-60SA

Energy Technology Data Exchange (ETDEWEB)

Ferro, Alberto, E-mail: alberto.ferro@igi.cnr.it [Consorzio RFX, C.so Stati Uniti 4, 35127 Padova (Italy); Gaio, Elena [Consorzio RFX, C.so Stati Uniti 4, 35127 Padova (Italy); Novello, Luca [Fusion for Energy, Broader Development of Fusion Department, Boltzmannstr 2, 85748 Garching (Germany); Matsukawa, Makoto; Shimada, Katsuhiro; Kawamata, Yoichi; Takechi, Manabu [Japan Atomic Energy Agency, Naka Fusion Institute, 801-1 Mukoyama, Naka, Ibaraki 311-019 (Japan)

2015-10-15

Highlights: • In JT-60SA, a power supply system (RWM-PS) will feed 18 coils to control the RWMs. • One power amplifier per coil will follow an arbitrary real-time reference. • Very fast dynamics is required (current bandwidth: 3 kHz; latency: 50 μs). • The requirements of the RWM-PS are updated and design solutions discussed. • The reference design of the RWM-PS is based on H-bridges operated at 20 – 30 kHz. - Abstract: The mission of JT-60SA, the satellite Tokamak under construction in Naka (Japan), includes the attainment of steady-state high-beta plasmas. For this purpose, an active control system based on 18 in-vessel sector coils (SC) is foreseen to suppress the resistive wall modes (RWM). Each coil will be independently fed by a dedicated converter, rated for 300 A and 240 V, which has to produce the required current/voltage following in real time the reference provided by the JT-60SA MHD Controller. To minimize the current rating, these converters shall be sufficiently fast to avoid an excessive growth of the RWM. This requires a very high dynamic performance, largely beyond that of standard industrial applications. This paper firstly reports the latest results of the studies on the requirements of the RWM active control system. Then, the reference design of the power supply system is presented, including the ac/dc conversion stage, the fast converters and the control section. The advantages of the proposed scheme are discussed and the main electrical parameters are presented.

High Beta Steady State Research and Future Directions on JT-60U and JFT-2M

Science.gov (United States)

Ishida, Shinichi

2003-10-01

JT-60U and JFT-2M research is focused on high beta steady state operation towards economically and environmentally attractive reactors. In JT-60U, a high-βp H-mode plasma was sustained with βN 2.7 for 7.4 s in which neoclassical tearing modes (NTMs) limited the attainable β_N. Real-time tracking NTM stabilization system using ECCD demonstrated complete suppression of NTM leading to recovery of βN before onset of NTM. Performance in a fully non-inductive H-mode plasma was improved up to n_i(0) τE T_i(0) = 3.1 x 10^20 keV s m-3 using N-NBCD with βN 2.4, HH_y,2=1.2 and bootstrap fraction f_BS 0.5. ECH experiments extended the confinement enhancement for dominantly electron heated reversed shear plasmas up to HH_y,2 2 at T_e/Ti 1.25. A world record ECCD efficiency, 4.2 x 10^18 A/W/m^2, was achieved at Te 23 keV with a highly localized central current density. Innovative initiation and current build-up without center solenoid currents were established by LHCD/ECH and bootstrap current up to f_BS 0.9. In JFT-2M, the inside of the vacuum vessel wall was fully covered with low-activation ferritic steel plates to investigate their use in plasmas near fusion conditions. High βN plasmas were produced up to βN = 3.3 with an internal transport barrier (ITB) and a steady H-mode edge. A new H-mode regime with steady high recycling (HRS) and an ITB was exploited leading to βN H_89P 6.2 at n_e/nG 0.7. In 2003, JT-60U will be able to operate for the duration up to 65 s at 1 MA/2.7 T and the heating/current-drive duration up to 30 s at 17 MW to prolong high-βN and/or high-f_BS discharges with feedback controls. JFT-2M is planning to implement wall stabilization experiments in 2004 to pursue plasmas above the ideal no-wall limit using a ferritic wall. The modification of JT-60 to a fully superconducting tokamak is under discussion to explore high-β steady state operation in collision-less plasmas well above no-wall limit with ferritic wall in a steady state.

Need sinihallid veised... : Marie Under ja Villem Ridala / Ruth Mirov

Index Scriptorium Estoniae

Mirov, Ruth, 1928-

2008-01-01

Vaadeldakse kahte ühest ja samast muistendist - merest tõusnud lehmakarjast - inspireeritud ballaadi: Marie Underi "Merilehmi" (ilm. kogus "Õnnevarjutus", 1929) ja Villem Ridala "Sinist karja" (ilm. kogus "Sinine kari", 1930)

Development of the piezoelectric gas injection valve for JT-60

International Nuclear Information System (INIS)

Kawasaki, Kazuo; Hiratuka, Hajime

1986-01-01

Piezoelectric gas injection valve (PEV) for JT-60 have been developed which was a piezo-electric element. The raliability of the PEV under the actual condition of high magnetic fields and high temperatures are veryfied, and it became clear that the PEV had enough throughput range and sufficient repetability for long life throughput characteristics. Remarkables of the developed PEV are summarized as follows, (1) The maximum throughput rate, responce time and helium leakage rate satisfy the desiged specifications. (2) Throughput equation for PEV is clarified by comparison with experiment. (3) Reliabilities of PEV under the actual condition during coil power test become clear. (author)

Ooperi valem : Mari Vihmandi "Armastuse valem" / Evi Arujärv

Index Scriptorium Estoniae

Arujärv, Evi, 1953-

2009-01-01

Argentiina kirjaniku Esther Vilari romaani "Nina Glucksteini matemaatika" ainetel valminud Mari Vihmandi ooperist "Armastuse valem", libreto Maimu Berg, lavastaja Liis Kolle, tantsu- ja liikumisseaded Ana Mondini. Esietendus 17. oktoobril 2008 Rahvusooperis Estonia

Marie Stopes International Child Spacing Clinics in Malawi

African Journals Online (AJOL)

programme, male involvement has the following basic aspects: Initiation of dialogue on child spacing within the ... that men feel that child spacing is also their concern and service providers feel men are not outsiders. ... pioneering work of Marie Stopes in caring for women in the poor communities of London by extending the ...

Revisiting Mary Daly: Towards a quadripartite theological and philosophical paradigm

Directory of Open Access Journals (Sweden)

Hannelie Wood

2015-06-01

Full Text Available I was a tenderfoot in feminist discourse when I started my research on patriarchy, feminism, and Mary Daly. In my thesis, one aspect I engaged was Daly’s battle with gender issues in Christian theology. From the beginning I was troubled by Mary Daly’s views on God, men, and women in her discourse on Christianity. Daly undoubtedly contributed to the discussion on gender issues in the Christian faith, but her focus on androcentrism and her interpretations of Scripture led her to abandon the Christian faith. Mary Daly has written extensively on patriarchy as it is found in religion – particularly in the Christian faith – and how it filters through society. In her critique of patriarchy she set her course to dismantle the facade of a patriarchal and misogynistic God as the root of patriarchy. Daly did not see any positive qualities of the Christian faith and completely rejected other interpretations of a God whose person embraces both male and female qualities. Against this background I will evaluate Daly’s post-Christian feminist theological and philosophical paradigm. I propose that Daly has a quadripartite theological and philosophical paradigm wherein there are four main players. The ‘Who is who’ in Daly’s quadripartite patriarchal theological and philosophical paradigm are the patriarchal male, the patriarchal female, the patriarchal God and the biophilic woman.

ALS5/SPG11/KIAA1840 mutations cause autosomal recessive axonal Charcot-Marie-Tooth disease.

Science.gov (United States)

Montecchiani, Celeste; Pedace, Lucia; Lo Giudice, Temistocle; Casella, Antonella; Mearini, Marzia; Gaudiello, Fabrizio; Pedroso, José L; Terracciano, Chiara; Caltagirone, Carlo; Massa, Roberto; St George-Hyslop, Peter H; Barsottini, Orlando G P; Kawarai, Toshitaka; Orlacchio, Antonio

2016-01-01

Charcot-Marie-Tooth disease is a group of hereditary peripheral neuropathies that share clinical characteristics of progressive distal muscle weakness and atrophy, foot deformities, distal sensory loss, as well as diminished tendon reflexes. Hundreds of causative DNA changes have been found, but much of the genetic basis of the disease is still unexplained. Mutations in the ALS5/SPG11/KIAA1840 gene are a frequent cause of autosomal recessive hereditary spastic paraplegia with thin corpus callosum and peripheral axonal neuropathy, and account for ∼ 40% of autosomal recessive juvenile amyotrophic lateral sclerosis. The overlap of axonal Charcot-Marie-Tooth disease with both diseases, as well as the common autosomal recessive inheritance pattern of thin corpus callosum and axonal Charcot-Marie-Tooth disease in three related patients, prompted us to analyse the ALS5/SPG11/KIAA1840 gene in affected individuals with autosomal recessive axonal Charcot-Marie-Tooth disease. We investigated 28 unrelated families with autosomal recessive axonal Charcot-Marie-Tooth disease defined by clinical, electrophysiological, as well as pathological evaluation. Besides, we screened for all the known genes related to axonal autosomal recessive Charcot-Marie-Tooth disease (CMT2A2/HMSN2A2/MFN2, CMT2B1/LMNA, CMT2B2/MED25, CMT2B5/NEFL, ARCMT2F/dHMN2B/HSPB1, CMT2K/GDAP1, CMT2P/LRSAM1, CMT2R/TRIM2, CMT2S/IGHMBP2, CMT2T/HSJ1, CMTRID/COX6A1, ARAN-NM/HINT and GAN/GAN), for the genes related to autosomal recessive hereditary spastic paraplegia with thin corpus callosum and axonal peripheral neuropathy (SPG7/PGN, SPG15/ZFYVE26, SPG21/ACP33, SPG35/FA2H, SPG46/GBA2, SPG55/C12orf65 and SPG56/CYP2U1), as well as for the causative gene of peripheral neuropathy with or without agenesis of the corpus callosum (SLC12A6). Mitochondrial disorders related to Charcot-Marie-Tooth disease type 2 were also excluded by sequencing POLG and TYMP genes. An additional locus for autosomal recessive Charcot-Marie

Eesti animafilm külvab uusi seemneid / Mari-Liis Rebane

Index Scriptorium Estoniae

Rebane, Mari-Liis

2009-01-01

PÖFFi alafestivalil Animated Dreams linastunud neljast uuest filmist: Olga ja Priit Pärna "Tuukrid vihmas", Kaspar Jancise "Krokodill", Martinus Daane Klemeti "Õhus" ja Girlin Bassovskaja (Jelena Girlin, Mari-Liis Bassovskaja) "Oranus"

Dysfunction in the hip joints in children with Charcot-Marie-Tooth syndrome (literature review

Directory of Open Access Journals (Sweden)

Ivan Yurievich Pozdnikin

2015-09-01

Full Text Available A review of the literature on the treatment of children with dysfunction in the hip joints in motor-sensory neuropathy Charcot-Marie-Tooth is presented. Peculiarities of disease diagnosis and the approach used in the treatment of patients are described. The Charcot-Marie-Tooth syndrome is a hereditary neuromuscular disease characterized by progressive atrophy of the distal muscle group of the lower limbs. According to international authors, the incidence of hip joint dysfunction in this condition is at least 10%, ranking second only to foot deformities. In the Russian literature, the problem has not been adequately interpreted. Early diagnosis of dysfunction in the hip joints during Charcot-Marie-Tooth syndrome is complicated by the child's age and is characterized by progression. Conflicting clinical signs and trivial symptoms of the disease also confuse diagnosis, until it becomes clearer in adolescence or the second or third decade of life. Surgical reconstructive operations on the hip joint often occur too late, and they are accompanied by a greater frequency of neurological complications. Practitioner awareness coupled with an early diagnosis of hip subluxation and decentration and complex orthopedic and neurological examinations of children with the disease of Charcot-Marie-Tooth should result in more favorable outcomes.

Deployment of Autonomous GPS Stations in Marie Byrd Land, Antartica

Science.gov (United States)

Donnellan, A.; Luyendyk, B.; Smith, M.; Dace, G.

1999-01-01

During the 1998-1999 Antarctic field season, we installed three autonomous GPS stations in Marie Byrd Land, West Antarctica to measure glacio-isostatic rebound and rates of spreading across the West Antartic Rift System.

Mitochondrial DNA analysis on remains of a putative son of Louis XVI, King of France and Marie-Antoinette.

Science.gov (United States)

Jehaes, E; Decorte, R; Peneau, A; Petrie, J H; Boiry, P A; Gilissen, A; Moisan, J P; Van den Berghe, H; Pascal, O; Cassiman, J J

1998-01-01

Carl Wilhelm Naundorff was buried in 1845 in Delft as Louis Charles, Duc de Normandie, 'Louis XVII'. However, the son of Louis XVI and Marie-Antoinette-Louis XVII--officially died in the Temple of Paris in 1795. In order to resolve the identity of Naundorff, mitochondrial DNA (mtDNA) D-loop sequences of his remains were compared with the sequences obtained from the hairs of two sisters of Marie-Antoinette, Marie-Antoinette herself, and with the sequences obtained from DNA samples of two living maternal relatives. The mtDNA sequence of a bone sample from Naundorff showed two nucleotide differences from the sequences of the three sisters and four differences from the sequences of living maternal relatives. Based on this evidence it becomes very unlikely that Naundroff is the son of Marie-Antoinette.

2017-2018 Travel Expense Reports for Mary Anne Chambers ...

International Development Research Centre (IDRC) Digital Library (Canada)

Chantal Taylor

Ottawa. Airfare: $368.41. Other. Transportation: $69.95. Accommodation: $542.79. Meals and. Incidentals: $164.42. Other: $0.00. Total: $1,145.57. Comments: From residence in Thornhill, Ontario. 2017-2018 Travel Expense Reports for Mary. Anne Chambers, Governor, Chairperson of the. Human Resources Committee.

2017-2018 Travel Expense Reports for Mary Anne Chambers ...

International Development Research Centre (IDRC) Digital Library (Canada)

Chantal Taylor

Ottawa. Airfare: $563.72. Other. Transportation: $74.26. Accommodation: $0.00. Meals and. Incidentals: $46.17. Other: $30.00. Total: $714.15. Comments: From residence in Thornhill, Ontario. 2017-2018 Travel Expense Reports for Mary. Anne Chambers, Governor, Chairperson of the. Human Resources Committee.

Two wives in science service: Marie Curie and Irene Joliot-Curie

International Nuclear Information System (INIS)

Bordry, M.

1996-01-01

This paper relates the life and the scientific works of Marie Curie and of her daughter Irene Joliot-Curie in their historical context. Several details are given about their laboratory works, their relations with students, the creation of the Radium Institute and the role they played during the two world wars. The progress of their works towards their main scientific discoveries (polonium, radium, artificial radioactivity, transuranium compounds etc..) is illustrated with some extracts of their personal correspondence with relatives. The paper evokes also the Nobel prices received by Pierre and Marie Curie and by Irene and Frederic Joliot and the creation of the CEA by Frederic Joliot in 1946. (J.S.). 6 photos

Advanced control scenario of high-performance steady-state operation for JT-60 superconducting tokamak

International Nuclear Information System (INIS)

Tamai, H.; Kurita, G.; Matsukawa, M.; Urata, K.; Sakurai, S.; Tsuchiya, K.; Morioka, A.; Miura, Y.M.; Kizu, K.; Kamada, Y.; Sakasai, A.; Ishida, S.

2004-01-01

Plasma control on high-β N steady-state operation for JT-60 superconducting modification is discussed. Accessibility to high-β N exceeding the free-boundary limit is investigated with the stabilising wall of reduced-activated ferritic steel and the active feedback control of the in-vessel non-axisymmetric field coils. Taking the merit of superconducting magnet, advanced plasma control for steady-state high performance operation could be expected. (authors)

Anneli Remme soovitab : Kuninganna Mary elu ja surm / Anneli Remme

Index Scriptorium Estoniae

Remme, Anneli, 1968-

2002-01-01

Kontserdisarja "Hingemuusika" teist kontserti raamivad Henry Purcelli teosed, millest esimene on loodud kuninganna Mary sünnipäevaks, viimane matusetseremooniaks. Barokkansambli Corelli Consort esituses 26., 27., ja 28. apr. Viljandi, Tartu ja Tallinna kirikutes

Estimation of performance of a J-T refrigerators operating with nitrogen-hydrocarbon mixtures and a coiled tubes-in-tube heat exchanger

Science.gov (United States)

Satya Meher, R.; Venkatarathnam, G.

2018-06-01

The exergy efficiency of Joule-Thomson (J-T) refrigerators operating with mixtures (MRC systems) strongly depends on the choice of refrigerant mixture and the performance of the heat exchanger used. Helically coiled, multiple tubes-in-tube heat exchangers with an effectiveness of over 96% are widely used in these types of systems. All the current studies focus only on the different heat transfer correlations and the uncertainty in predicting performance of the heat exchanger alone. The main focus of this work is to estimate the uncertainty in cooling capacity when the homogenous model is used by comparing the theoretical and experimental studies. The comparisons have been extended to some two-phase models present in the literature as well. Experiments have been carried out on a J-T refrigerator at a fixed heat load of 10 W with different nitrogen-hydrocarbon mixtures in the evaporator temperature range of 100-120 K. Different heat transfer models have been used to predict the temperature profiles as well as the cooling capacity of the refrigerator. The results show that the homogenous two-phase flow model is probably the most suitable model for rating the cooling capacity of a J-T refrigerator operating with nitrogen-hydrocarbon mixtures.

Mary's Story: A Curriculum for Teaching Medical Terminology.

Science.gov (United States)

Pennsylvania State Univ., University Park. Inst. for the Study of Adult Literacy.

This packet of materials for a class on medical terminology consists of a collection of stories with highlighted vocabulary, teacher's guide, and student's guide. The materials teach medical terms in a series of stories about a woman named Mary Consola. Each story begins with a list of word parts that will be learned; after the story, new word…

Purification, crystallization and preliminary crystallographic characterization of the α2,6-sialyltransferase from Photobacterium sp. JT-ISH-224

International Nuclear Information System (INIS)

Okino, Nozomu; Kakuta, Yoshimitsu; Kajiwara, Hitomi; Ichikawa, Masako; Takakura, Yoshimitsu; Ito, Makoto; Yamamoto, Takeshi

2007-01-01

Crystallization of the α2,6-sialyltransferase from Photobacterium. Sialyltransferases transfer sialic acid from cytidine-5-monophospho-N-acetylneuraminic acid (CMP-NeuAc) to the nonreducing termini of the oligosaccharyl structures of various glycoproteins and glycolipids. The newly cloned α2,6-sialyltransferase from Photobacterium sp. JT-ISH-224 (from the Vibrionaceae family) is composed of two domains: an unknown N-terminal domain and a catalytic C-terminal domain which shares significant homology with the Pasteurella multocida multifunctional sialyltransferase. The putative mature form of JT-ISH-224 α2,6-sialyltransferase was overproduced in Escherichia coli, purified and crystallized using the hanging-drop vapour-diffusion method at 293 K. The crystal belonged to space group P3 1 21 or P3 2 21, with unit-cell parameters a = b = 90.29, c = 204.33 Å. X-ray diffraction data were collected to 2.5 Å resolution

2016-2017 Travel Expense Reports for Mary Anne Chambers ...

International Development Research Centre (IDRC) Digital Library (Canada)

Beata Bialic

Date(s):. 2016-07-06. Destination(s):. Ottawa. Airfare: $482.11. Other. Transportation: $64.30. Accommodation: $0.00. Meals and. Incidentals: $25.28. Other: $0.00. Total: $571.69. Comments: 2016-2017 Travel Expense Reports for Mary. Anne Chambers, Governor, Chairperson of the. Human Resources Committee.

Development of a VME multi-processor system for plasma control at the JT-60 Upgrade

International Nuclear Information System (INIS)

Takahashi, M.; Kurihara, K.; Kawamata, Y.; Akasaka, H.; Kimura, T.

1992-01-01

Design and initial operation results are reported of a VME multi-processor system [1] for plasma control at a large fusion device named 'the JT-60 Upgrade' utilizing three 32-bit MC88100 based RISC computers and VME components. Development of the system was stimulated by faster and more accurate computation requirements for the plasma position and current control. The RISC computers operate at 25 MHz along with two cashe memories named MC88200. We newly developed VME bus modules of up/down counter, analog-to-digital converter and clock pulse generator for measuring magnetic field and coil current and for synchronizing the processing in the three RISCs and direct digital controllers (DDCs) of magnet power supplies. We also evaluated that the speed of the data transfer between the VME bus system and the DDCs through CAMAC highways satisfies the above requirements. In the initial operation of the JT-60 upgrade, it has been proved that the VME multi-processor system well controls the plasma position and current with a sampling period of 250 μsec and a delay of 500 μsec. (author)

1970. aastatel alustas arhitektidest sõprade ja kolleegide rühm... / Mari Laanemets

Index Scriptorium Estoniae

Laanemets, Mari, 1975-

2008-01-01

27.VI avatakse Eesti Arhitektuurimuuseumis Rotermanni soolalaos 1970. ja 1980. alguse eksperimentaalset arhitektuuripraktikat käsitlev näitus "Keskkond, objektid, kontseptsioonid. Tallinna kooli arhitektid 1972-1985". Näha saab Ülevi Eljandi, Ignar Fjuki, Veljo Kaasiku, Tiit Kaljundi, Vilen Künnapu, Leonhard Lapini, Avo-Himm Looveere, Kristin-Mari Looveere, Marika Lõokese, Jüri Okase, Jaan Olliku, Ain Padriku, Toomas Reinu, Andres Ringo, Sirje Runge, Harry Sheini, Tõnis Vindi ja Matti Õunapuu töid. Näituse kuraatorid Andres Kurg ja Mari Laanemets. Samas: "Uue arhitektuuri näituse programm" (1972)

Kunsti kuumtöötlus Läti aladel / Mari Sobolev

Index Scriptorium Estoniae

Sobolev, Mari, 1968-

2004-01-01

Pedvale vabaõhumuuseumis toimunud rahvusvahelisest workshop'ist teemal "Kompost", mille tulemusi presenteeriti 6. VIII 2004. Ignas Kazakeviciuse, Jurate Rakeviciute, Diana Dimzha-Dime, Ule Björn Gundermanni, Remo Randveri, Maris Grosbahsi, Andrus Joonase töödest

Noorte eesti režissööride uued filmid Sõpruses / Mari Peegel

Index Scriptorium Estoniae

Peegel, Mari, 1978-

2005-01-01

Sõpruse kinos esilinastub homme kaks eesti lühimängufilmi - "Vanameeste paradiis" : stsenaristid Ove Musting, Urmas Lennuk : režissöör Ove Musting : mängivad Tõnu Aav, Aleksander Eelmaa jt ning "Ukse taga" : stsenarist Margit Keerdo : režissöör Andrus Tuisk : osades Hele Kõre, Karin Lätsim, Kirill Käro, Igor Gavrilov

The medical applications of the discoveries of Marie Sklodowska-Curie

International Nuclear Information System (INIS)

Krawczyk, M.

2011-01-01

In this work, the author indicates what have been the applications of the discoveries of Marie Curie in the field of medicine and how these discoveries have contributed in particular to the development of oncologic radiotherapy. (O.M.)

High coupling performance of JT-60U ICRF antennas

International Nuclear Information System (INIS)

Saigusa, M.; Moriyama, S.; Fujii, T.; Kimura, H.; Sato, M.; Hosogane, N.; Nemoto, M.; Yamamoto, T.

1994-01-01

Sufficient coupling of an ICRF antenna for high power experiments was obtained even for a wide gap between the separatrix and the antenna in JT-60U. The loading resistances for an out-of-phase mode are over 4 Ω for a gap of 13 cm between the separatrix and the Faraday shield over the wide range of electron density from 1 x 10 19 to 5.5 x 10 19 m -3 . In particular, the loading resistances for an in-phase mode are about 5 Ω for a gap of 33 cm between the separatrix and the Faraday shield for the same plasma parameters. However, the heating response for the out-of phase mode is much stronger than that for the in-phase mode. (author). Letter-to-the-editor. 11 refs, 6 figs

2016-2017 Travel Expense Reports for Mary Anne Chambers ...

International Development Research Centre (IDRC) Digital Library (Canada)

chantal taylor

Purpose: Board meetings. Date(s):. 2017-03-19 to 2017-03-22. Destination(s):. Ottawa. Airfare: $121.05. Other. Transportation: $51.92. Accommodation: $926.48. Meals and. Incidentals: $190.40. Other: $0.00. Total: $1,289.85. Comments: 2016-2017 Travel Expense Reports for Mary. Anne Chambers, Governor ...

Umbilical metastasis (Sister Mary Joseph's nodule diagnosed by fine-needle aspiration

Directory of Open Access Journals (Sweden)

Tatomirović Željka

2004-01-01

Full Text Available Sister Mary Joseph’s nodule is the eponym for metastatic involvement of the umbilicus. This less common entity is the sign of disseminated malignant disease, mainly of digestive and gynecologic origin, and is associated with a poor prognosis. A case of Sister Mary Joseph’s nodule in a 76-year-old woman in whom the umbilical metastasis was the first sign of malignant disease in presented. The diagnosis of metastatic adenocarcinoma was established by fine needle aspiration cytology of the umbilical nodule. Radiological and ultrasonographic investigation disclosed carcinoma of the gallbladder with pancreas, stomach, and colon invasion as well as peritoneal dissemination. The diagnosis was confirmed by exploratory laparatomy and histological examination of the excised umbilical nodule.

Digimeedia festival ühendas nalja ja masina / Raivo Kelomees

Index Scriptorium Estoniae

Kelomees, Raivo, 1960-

2006-01-01

Kunsti ja digitaalkultuuri festivalist Transmediale Berliinis. Festivali teemaks oli "Reality Addicts" (realiteedisõltlased), sündmuse keskmeks prantslanna Anne-Marie Duguet' kureeritud videote ja installatsioonide näitus "Smile Machines". Kogu festivali temaatiline tugipunkt oli huumoripoliitika. Eksponeeritud olid Nam June Paiki "Mõtleja - TV Rodin", Simon Penny projekt "Petit Mal", George Maciunase "Flux Smile Machine", Maurice Benayouni "Emotion Vending Machine", Christian Mölleri projekt "Cheese" jt. Festivali peakülaline oli Jean-Jacques Perrey

Mapping Femininity as Self-reflection Strategy in Lady Mary Wortley Montagu’s Travel Letters

OpenAIRE

Amelia Precup

2017-01-01

The present paper participates in the discussion about the differences between masculine and feminine modes of travel in terms of interests, perception, and representation, by exploring the Letters of the Right Honourable Lady M--y W--y M--e Written during Her Travels in Europe, Asia and Africa, by Lady Mary Wortley Montagu. As a traveller, Lady Mary engaged in the contemplation of cultural landscapes: she attempted to understand the social logic of the communities she met and to assess the c...

In honour of Marie Sklodowska-Curie

International Nuclear Information System (INIS)

Karlik, Berta

1967-01-01

This year marks the hundredth anniversary of the birth in Poland of Marie Sklodowska-Curie, originator of the word 'radioactivity', whose early research in the subject has had far-reaching consequences for the nuclear sciences. The Government of Poland's arrangements for marking the occasion include an international symposium, restoration of her house in Warsaw, publications and films, and the Agency is happy to collaborate. This article, from a distinguished Austrian scientist, indicates how her work was carried out in an atmosphere of co-operation between scientists of many nations

Artificial intelligence for Mariáš

OpenAIRE

Kaštánková, Petra

2016-01-01

This thesis focuses on the implementation of a card game, Mariáš, and an artificial intelligence for this game. The game is designed for three players and it can be played with either other human players, or with a computer adversary. The game is designed as a client-server application, whereby the player connects to the game using a web page. The basis of the artificial intelligence is the Minimax algorithm. To speed it up we use the Alpha-Beta pruning, hash tables for storing equivalent sta...

Mart ja Mari-Ann Susi taotlevad omanikena Concordia pankrotti / Andri Maimets

Index Scriptorium Estoniae

Maimets, Andri, 1979-

2003-01-01

Concordia Ülikooli rektor Mart Susi esitas kohtule avalduse, milles taotleb ülikooli pidanud Concordia Varahalduse OÜ pankroti väljakuulutamist. Vt. samas: Mari-Ann Susi õigustas ülikooli raha kasutamist

2016-2017 Travel Expense Reports for Mary Anne Chambers ...

International Development Research Centre (IDRC) Digital Library (Canada)

Beata Bialic

Purpose: Board meetings. Date(s):. 2016-11-20 to 2016-11-23. Destination(s):. Ottawa. Airfare: $445.14. Other. Transportation: $29.05. Accommodation: $786.80. Meals and. Incidentals: $76.79. Other: $0.00. Total: $1,337.78. Comments: 2016-2017 Travel Expense Reports for Mary. Anne Chambers, Governor, Chairperson ...

2016-2017 Travel Expense Reports for Mary Anne Chambers ...

International Development Research Centre (IDRC) Digital Library (Canada)

Beata Bialic

Date(s):. 2016-08-14 to 2016-08-23. Destination(s):. Peru/Colombia. Airfare: $3,484.87. Other. Transportation: $0.00. Accommodation: $1,942.21. Meals and. Incidentals: $395.27. Other: $75.50. Total: $5,897.85. Comments: 2016-2017 Travel Expense Reports for Mary. Anne Chambers, Governor, Chairperson of the.

Ruum peaks olema taustaks inimeste mõtetele ja kulgemistele / Mari Koger

Index Scriptorium Estoniae

Koger, Mari

2008-01-01

Autor oma seisukohtadest ja taotlustest sisekujunduses - isikupärast, viimistletusest, avatud voolavast ruumist, stiilide kontrastist ja vanade asjade väärtustamisest. Mari Koger peab koos Taavi Aunrega sisearhitektuuribürood Boom

Saukas ja Karusoo tõid Marie Underi elu teatrilavale / Andres Laasik

Index Scriptorium Estoniae

Laasik, Andres, 1960-2016

2006-01-01

20. nov. Kumu auditooriumis esietendunud Ühenduse R.A.A.A.M teatriprojekt "Under" poetess Marie Underist. Lavastajad Merle Karusoo ja Raimo Pass, kunstnik Jaagup Roomet, helilooja Urmas Lattikas, peaosas Katrin Saukas

Type A aortic dissection associated with Dietzia maris.

Science.gov (United States)

Reyes, Guillermo; Navarro, José-Luis; Gamallo, Carlos; delas Cuevas, María-Carmen

2006-10-01

Aortitis is a rare cause of aortic dissection. We report the unusual presentation of a 77-year-old male patient who underwent emergency surgery for an aortic dissection type A. A purulent pericardial fluid and inflammatory aorta were found after chest opening. Several samples were sent for analysis. The ascending aorta presented a mild dilatation with a large haematoma infiltrating the aortic root. The distal part of the ascending aorta seemed unaffected. The aortic rupture was found one centimetre above the non-coronary cusp. Aortic wall tissues were extremely fragile and with an inflammatory aspect. The patient died in the theatre room. In the histological study one out of three fragments of ascending aorta displayed longitudinal splitting of the outer media, with blood extravasation in the adventitial layer. In this level, the presence of a detritus material that reminded of bacterial colonies was noteworthy, together with abundant fibrinous exudates. In the laboratory a new specimen, Dietzia maris, was found in the pericardial liquid and in the aortic wall. We believe that this is the first reported finding of Dietzia maris in a patient with aortic disease.

The light and brilliancy of Marie Curie

International Nuclear Information System (INIS)

Craig, P.

1984-01-01

The paper describes the life and work of Marie Curie, from her childhood to her death (at nearly 67 years), and including her marriage to Pierre Curie. The scientific work, by the Curies, leading to the discovery of polonium and radium is described, as well as the making of radium chloride. The importance of the Curies' work to theoretical science is briefly discussed, and the effects of radioactivity on the Curies is touched upon. (U.K.)

Muuga / Mary von Grünewaldt ; tõlk. Mati Sirkel

Index Scriptorium Estoniae

Grünewaldt, Mary von

2004-01-01

Leo Zoegelt ostetud Muuga mõisahoone korrastamisest ja uue hoone ehitamisest C. T. von Neffi kunstikogu paigutamise tarbeks. Tütre mälestused. Tõlgitud raamatust: Skizzen und Bilder aus dem Leben Carl Timoleon von Neff / Mary von Grünewaldt. Darmstadt, 1887

Envisioning science : Marie Curie's journey from Poland to Paris

International Nuclear Information System (INIS)

Odlin, S.; Fleming, J.S.

2011-01-01

Marya Sklodovska (nicknamed Manya), born November 1867, was the fifth and youngest child in the Sklodovski family. Marie Curie epitomised the ability to be beautifully creative. Her pioneering spirit gave her the drive to become one of the first women to gain an education, and qualifications, in the sciences. 5 refs., 1 fig.

The “Mari” Hypothesis in the Study of the Toponymy of the Oka and Unzha Rivers and the Western Borders of the Old Mari Toponymic Area

Directory of Open Access Journals (Sweden)

Oleg V. Smirnov

2015-12-01

Full Text Available Referring to toponymic data, the article aims to verify the hypothesis of the western origin of the Mari people who, presumably, migrated to their present-day settlement area from the territory of Kostroma Region and the Oka River basin. The author critically examines the possibility of Mari origin of some place names in the territory in question, namely, of hydronyms ending in -ingir'. To verify the “Mari” hypothesis, the author uses the method of ethnic modelling which consists in the isolation of typical toponymic stems in present-day Mari toponymy and searching for their traces in the substrate toponymy of the studied area. The analysis leads to conclude that it is unlikely that the toponymy of the western part of Kostroma Region and the Oka River basin could be of Mari origin. The area of distribution of typical Mari place names does not display any evidence of Mari substrate or superstrate to the west of the Kerzhanets River basin. On the Western bank of the Volga, some traces of substratal Mari toponymy can be found along the banks of the Sura River as far as the city of Alatyr, however, no Mari “residue” can be found west of the Sura. The absence of Mari substrate in the toponymy of the Oka and Unzha Rivers area makes it possible to refute the hypothesis of the western origin of the Mari and their migration from the area of Gorodets and Dyakovo archaeological cultures. At the same time, the study of phonetic correspondences reflected in place names reveals evidence of close kinship of the substratal dialects of Western Kostroma Region, the low Oka and Klyazma Rivers area with the Mari (Proto-Mari language.

Estimation of the lifetime of resin insulators against baking temperature for JT-60SA in-vessel coils

Energy Technology Data Exchange (ETDEWEB)

Sukegawa, Atsuhiko M., E-mail: morioka.atsuhiko@jaea.go.jp; Murakami, Haruyuki; Matsunaga, Go; Sakurai, Shinji; Takechi, Manabu; Yoshida, Kiyoshi; Ikeda, Yoshitaka

2015-10-15

Highlights: • The lifetime of resin insulators at about 200 °C was estimated. • We make use of the Arrhenius plot by the Weibull analysis for the estimation. • A suitable temperatures for the in-vessel coils were discussed. - Abstract: In the present study, the thermal endurance of epoxy-based, bismaleimides, and cyanate ester resins for the current design of the in-vessel coils was measured by performing acceleration tests to assess their insulation properties using the thermal endurance defined by the International Electrotechnical Commission (IEC-60216 Part1–Part 6) for a minimum of 5,000 h in the 180–240 °C temperature range. It was found that none of the resin insulators could tolerate the baking conditions of 40,000 h at ∼200 °C in the JT-60SA vacuum vessel. Therefore, the design of the in-vessel coils, including the error field correction coils (EFCC), was changed from the type without water cooling to with water cooling on JT-60SA.

Design of Plasma Facing Components for Superconducting Modification of JT-60

International Nuclear Information System (INIS)

Shinji Sakurai; Kei Masaki; Yusuke-Kudo Shibama; Hiroshi Tamai; Makoto Matsukawa; Cordier, J.J.

2006-01-01

JT-60 is planning to modify the machine as a fully superconducting coil tokamak (JT-60 Super Advanced, the former JT-60SC and NCT) to establish scientific and technological bases for an economically and environmentally attractive DEMO reactor. It will be also a satellite tokamak in a part of broader approach for ITER. It is designed for high beta (betaN = 3.5-5.5) and steady-state research in a break-even class DD plasma for 100 s or longer. Nominal plasma parameters are I p =5.5 MA, B t =2.7 T, R=3.01 m, a=1.14 m with double-null configuration. An ITER-like single-null configuration with I p =3.5 MA, B t =2.6 T can be also operated. In order to study the ITER-relevant high confinement plasma with high density, designed plasma heating power was enhanced from 25 MW to 41 MW for 100 s through the design review with EU and Japan. The heat flux onto outer divertor target exceeds 10 MW/m 2 with moderate radiative fraction of 50-60% in single-null configuration. Therefore, the ITER-like mono-block CFC target will be adopted to aim at power handling of 15 MW/m 2 . A cooling water system should be reinforced 3 times from original design for double null divertor with high coolant flow velocity of ∼10 m/s. The peak heat flux onto the neutral beam armor for perpendicular injected positive NB is evaluated to be 2 MW/m 2 , which needs to be actively water-cooled. A bolt-fixed CFC tile was tested at the heat flux of 1-3 MW/m 2 and will be applied to the NB armor. In order to improve plasma beta value by enhancing wall stabilization effect, passive-stabilizing plates, which are electrically and mechanically connected in poloidal and toroidal direction, will be installed near the plasma surface (r wall /a=1.1-1.3) at the outboard side. Stabilizing plate has double-wall ribbed structure and can be operated at 573 K with heating nitrogen gas instead of cooling water between double walls. It has crank-type support legs to allow thermal expansion at high temperature operation. The

Monte Carlo approach to define the refrigerator capacities for JT-60SA

International Nuclear Information System (INIS)

Wanner, Manfred; Barabaschi, Pietro; Lamaison, Valerie; Michel, Frederic; Reynaud, Pascal; Roussel, Pascal

2011-01-01

The JT-60SA cryogenic system shall provide refrigeration to keep the superconducting magnets and their structures at 4.4 K, cryo-pumps at 3.7 K, thermal shields at 80-100 K, and deliver a flow of 50 K helium to the current leads. A Monte Carlo method is proposed to determine the capacity contingencies for the refrigeration system. Attributing individual contingencies and distribution probability functions to the design variables allows the different load contributions to be statistically averaged. The total refrigeration contingency is derived for each temperature level from the 95% confidence level of the integrated distribution function.

Long-term erosion and re-deposition of carbon in the divertor region of JT-60U

International Nuclear Information System (INIS)

Gotoh, Y.; Tanabe, T.; Ishimoto, Y.; Masaki, K.; Arai, T.; Kubo, H.; Tsuzuki, K.; Miya, N.

2006-01-01

Erosion and redeposition profiles of carbon tiles used in the W-shaped divertor of JT-60U with all carbon plasma facing wall are studied. The inner divertor is mostly covered by carbon redeposited layers, while the outer divertor mostly eroded. In the dome region, the erosion dominates on the inner dome-wing, while redeposited on the outer dome-wing. The redeposited layers on the outer dome-wing show very clear columnar structures indicating local carbon transport form the outer divertor to the outer dome-wing. The weight gain by the redeposition extrapolated to the whole divertor area is 0.55 kg. Since the extrapolated total erosion is about 0.33 kg, the remaining 0.22 kg must be originated from the main chamber erosion. Significant amount of the redeposition is caused locally by multiple processes of erosion, ionization and prompt redeposition toward inboard direction owing to gyration along magnetic filed line. This inboard transport is one of the reasons for small redeposition on the plasma shadowed area of the W shaped divertor of JT-60U with pumping slots placed at the bottoms side

From security to attachment : Mary Ainsworth's contribution to attachment theory

NARCIS (Netherlands)

Rosmalen, Lenette (Lenny) van

2015-01-01

Even though John Bowlby (1907-1990) is generally regarded as the founder of attachment theory, Mary Ainsworth’s (1913-1999) contribution is considerable and goes beyond the design of the Strange Situation Procedure and the introduction of maternal sensitivity as decisive for a secure attachment

Mary E. Hall: Dawn of the Professional School Librarian

Science.gov (United States)

Alto, Teresa

2012-01-01

A century ago, a woman named Mary E. Hall convinced school leaders of the need for the professional school librarian--a librarian who cultivated a love of reading, academic achievement, and independent learning skills. After graduating from New York City's Pratt Institute Library School in 1895, Hall developed her vision for the high school…

Evaluation of mechanical strength of the joints in JT-60 toroidal field coil conductors

International Nuclear Information System (INIS)

Nishio, Satoshi; Ohkubo, Monoru; Sasajima, Hiroshi

1980-04-01

Toroidal field (TF) coils of JT-60 produce a toroidal field of 45 kG at a plasma axis, they have an inner bore of 3.90 m and a weight of about 80 metric tons per coil. Eighteen TF coils are located around a torus axis at regular intervals. TF coil conductors are mostly jointed by high frequency induction brazing, the rest jointed by welding. In deciding the details of the jointing procedures, the conductor size and the requested mechanical strength are mainly taken into consideration. Described are non-destructive inspection methods for the brazed joints, strength evaluation, and the inspection criteria. Ultrasonic testing method is found to be the most effective in evaluation of mechanical properties of the brazed joints especially in terms of fatigue strength. In section 1, specifications of the TF coils are given. In section 2, the ultrasonic inspection method and the detectability of this apparatus are described in detail, the defects of known size are compared with the indication values and display figures. The apparatus developed for JT-60 is operated automatically also recording the inspectionresults. In section 3, mechanical strength of the brazed joints with initial defects is discussed on the basis of Fracture Mechanics theory and results of the fatigue crack growth test. The inspection criteria in accordance with the descriptions of section 2 and 3 are given in section 4. (author)

Operation experiences of the JT-60 first walls during high-power additional heating experiments

International Nuclear Information System (INIS)

Takatsu, H.; Ando, T.; Yamamoto, M.; Arai, T.; Kodama, K.; Suzuki, M.; Shimizu, M.

1989-01-01

JT-60 started its operation in May 1985 with TiC-coated molybdenum or Inconel 625 first walls. They provided very clean surfaces as well as superior plasma characteristics during Joule heating discharges. Though 20 μm-thick TiC coatings showed good adhesion characteristics, melting of the TiC coating and also the molybdenum or Inconel 625 substrate was observed at some specific spots, and an influx of heavy metals to the main plasma was inevitable during discharges. Initial results of the additional heating experiments showed degrading effects of locally melted TiC-coated molybdenum or Inconel 625 on plasma operation. Therefore, about a half of the TiC-coated first walls were removed and new graphite first walls were installed during the venting period from April to May 1987. The start-up of the discharge conditioning after installation of a significant number of graphite tiles was very rapid. Flexibility in plasma operation was increased, and JT-60 extended the operation region beyond its original specifications. The graphite first walls of the main chamber performed admirably and maintained their integrity under the conditions of plasma current and additional heating power up to 3.2 MA and 30 MW, respectively. On the other hand, the number of damaged divertor plates was much larger than that expected. The reason of unexpected failure is now under examination. (orig.)

Development of computer-aided software engineering tool for sequential control of JT-60U

International Nuclear Information System (INIS)

Shimono, M.; Akasaka, H.; Kurihara, K.; Kimura, T.

1995-01-01

Discharge sequential control (DSC) is an essential control function for the intermittent and pulse discharge operation of a tokamak device, so that many subsystems may work with each other in correct order and/or synchronously. In the development of the DSC program, block diagrams of logical operation for sequential control are illustrated in its design at first. Then, the logical operators and I/O's which are involved in the block diagrams are compiled and converted to a certain particular form. Since the block diagrams of the sequential control amounts to about 50 sheets in the case of the JT-60 upgrade tokamak (JT-60U) high power discharge and the above steps of the development have been performed manually so far, a great effort has been required for the program development. In order to remove inefficiency in such development processes, a computer-aided software engineering (CASE) tool has been developed on a UNIX workstation. This paper reports how the authors design it for the development of the sequential control programs. The tool is composed of the following three tools: (1) Automatic drawing tool, (2) Editing tool, and (3) Trace tool. This CASE tool, an object-oriented programming tool having graphical formalism, can powerfully accelerate the cycle for the development of the sequential control function commonly associated with pulse discharge in a tokamak fusion device

Overview of JT-60U results toward high integrated performance in reactor-relevant regime

International Nuclear Information System (INIS)

Fujita, T.

2002-01-01

Toward steady sustainment of high integrated performance, we have developed weak magnetic shear (high β p mode) and reversed magnetic shear plasmas. As a large-sized tokamak equipped with a variety of devices for heating, current drive and profile/shape control, JT-60U has high ability to approach the conditions required in reactors: low values of normalized Larmor radius and collisionality, high temperatures with T e > or approx. T i , etc. This paper reviews recent JT-60U results with the emphasis on the projection to the reactor-relevant regime. Full non-inductive current drive has been achieved in a 1.8 MA high β p H-mode plasma with β N 2:4, HH y2 =1.2 and high fusion triple product (3 x 10 20 m -3 keVs) owing to increased N-NB power. In a reversed shear plasma, HH y2 =1.4 at n e /n GW 0.8 under the full non-inductive current drive has been achieved with injection of LHRF and N-NB. In box-type ITBs with reversed shear, barriers for ions and electrons were sustained in a regime with T e > or approx. T i . The pedestal pressure was doubled with increased total poloidal beta in pellet-injected high triangularity plasmas with type I and II ELMs. Stable existence of current hole was demonstrated. (author)

Development of a pellet cutting and loading device for the JT-60 repetitive pellet injector

International Nuclear Information System (INIS)

Hiratsuka, Hajime; Ichige, Hisashi; Kizu, Kaname; Iwahashi, Takaaki; Honda, Masao

2001-03-01

In JT-60, a pellet injector that repetitively injects deuterium pellets is under development to supply fuel to high temperature plasmas and sustain high-density plasmas. The pellet injector generates cubic pellets and accelerates them with a straight-arm rotor by centrifugal force. In this acceleration method, it is important to supply pellets reliably and stably, to prevent pellet orbits from disordering and to stabilize the launching direction. To achieve higher performance of the injector, a pellet cutting and loading device that cuts a deuterium ice rod into cubic pellets and loads them to the pellet injector successively and stably has been developed. The pellet cutting and loading device can cut a deuterium ice rod produced at low temperature of -8 Pam 3 /s, cutting time of <3 ms, cutting frequency of 1-20 Hz and cutter stroke of 2.5 mm were confirmed in the device test. In the operation test after assembling this device to the centrifugal pellet injector, the operational performance of pellet injection frequency of ∼10 Hz, pellet speed of ∼690 m/s and pellet injection duration time of ∼3.5 s was achieved. Thus, the development of the pellet cutting and loading device contributed to the upgrade of the JT-60 pellet injector. (author)

Particle transport analysis in lower hybrid current drive discharges of JT-60U

International Nuclear Information System (INIS)

Nagashima, K.; Ide, S.; Naito, O.

1996-01-01

Particle transport is modified in lower hybrid current drive discharges of JT-60U. The density profile becomes broad during the lower hybrid wave injection and the profile change depends on the injected wave spectrum. Particle transport coefficients (diffusion coefficient and profile peaking factor) were evaluated using gas-puff modulation experiments. The diffusion coefficient in the current drive discharges is about three times larger than in the ohmic discharges. The profile peaking factor decreases in the current drive discharges and the evaluated values are consistent with the measured density profiles. (author)

Relationship between composition of mixture charged and that in circulation in an auto refrigerant cascade and a J-T refrigerator operating in liquid refrigerant supply mode

Science.gov (United States)

Sreenivas, Bura; Nayak, H. Gurudath; Venkatarathnam, G.

2017-01-01

The composition of the refrigerant mixture in circulation during steady state operation of J-T and allied refrigerators is not the same as that charged due to liquid hold up in the heat exchangers and phase separators, as well as the differential solubility of different refrigerant components in the compressor lubricating oil. The performance of refrigerators/liquefiers operating on mixed refrigerant cycles is dependent on the mixture composition. It is therefore important to charge the right mixture that results in an optimum composition in circulation during steady state operation. The relationship between the charged and circulating composition has been experimentally studied in a J-T refrigerator operating in the liquid refrigerant supply (LRS) mode and an auto refrigerant cascade refrigerator (with a phase separator) operating in the gas refrigerant supply (GRS) mode. The results of the study are presented in this work. The results show that the method presented earlier for J-T refrigerators operating in GRS mode is also applicable in the case of refrigerators studied in this work.

Clio goes roller-skating: Images of Memory in some poems by Mary Kennan Herbert Clio goes roller-skating: Images de la mémoire dans quelques poèmes de Mary Kennan Herbert

Directory of Open Access Journals (Sweden)

Jennifer Kilgore

2009-11-01

Full Text Available A few words about Mary Kennan HerbertMary Kennan Herbert is a writer with midwestern roots. She was born in 1938 in St. Louis, Missouri, and spent most of her childhood there. During her adolescent years she lived in Tennessee. She obtained a University degree in art from Peabody College in Nashville. In New York, she pursued a career as editor in a publishing house until the 1980s, when a merger ended her job security. After several attempts at working for different publishers, she started s...

Autosomal recessive Charcot-Marie-Tooth neuropathy.

Science.gov (United States)

Espinós, Carmen; Calpena, Eduardo; Martínez-Rubio, Dolores; Lupo, Vincenzo

2012-01-01

Charcot-Marie-Tooth (CMT) disease, a hereditary motor and sensory neuropathy that comprises a complex group of more than 50 diseases, is the most common inherited neuropathy. CMT is generally divided into demyelinating forms, axonal forms and intermediate forms. CMT is also characterized by a wide genetic heterogeneity with 29 genes and more than 30 loci involved. The most common pattern of inheritance is autosomal dominant (AD), although autosomal recessive (AR) forms are more frequent in Mediterranean countries. In this chapter we give an overview of the associated genes, mechanisms and epidemiology of AR-CMT forms and their associated phenotypes.

Marie Curie's contribution to Medical Physics.

Science.gov (United States)

Jean-Claude, Rosenwald; Nüsslin, Fridtjof

2013-09-01

On occasion of its 50th anniversary, the International Organization for Medical Physics (IOMP) from now on is going to celebrate annually an International Day of Medical Physics for which the 7th November, the birthday of Marie Sklodowska Curie, a most exceptional character in science at all and a pioneer of medical physics, has been chosen. This article briefly outlines her outstanding personality, sketches her fundamental discovery of radioactivity and emphasizes the impact of her various achievements on the development of medical physics at large. © 2013 Published by Elsevier Ltd on behalf of Associazione Italiana di Fisica Medica.

Review of JT-60 experimental results from June to October, 1987

International Nuclear Information System (INIS)

1988-03-01

This is a prompt report on JT-60 experimental results from June to October, 1987. Experiments in hydrogen plasmas have been undertaken with up to 3.2 MA of plasma current in limiter discharges, 2.7 MA in divertor discharges, and 30 MW of total NB (H 0 → H + ) and RF injection power. In limiter discharges with ∼3 MA plasma current, the maximum central electron density of 1.3 x 10 20 m -3 and the energy confinement time of 0.15 - 0.18 sec were obtained with heating powers of 13 - 20 MW. The total plasma stored energy of 3.1 MJ, and n e (0)τ E of 1.4 - 1.8 x 10 19 m -3 sec were achieved. The best set of parameters achieved is n e (0)τ E = 1.8 x 10 19 m -3 sec and T i (0) = 3.7 KeV at plasma current of 3.2 MA. By applying deutrium discharge condition, n e (0)τ E and T i (0) enter the JT-60 target area determined by Atomic Energy Commission. Many short periods (50 - 100 ms) of H-mode phase are found in outside X-point divertor discharges with NB or NB + RF (LH or IC) heating power of more than 16 MW, although at present the energy confinement improvement is limited to within 10 %. In combined LH and NB heating of low-n-bar e discharge, the plasma stored energy increases with the same rate as NB heating only, with preferential absorption of LH wave to the high energy beam ions. In combined NB and on-axis ICRF heating of low-n-bar e discharge, a high incremental energy confinement time is obtained, with strong high energy beam ion acceleration and electron heating in the central region of the plasma. (author)

Baltika kvartal = Baltika Quarter / Maris Kerge, Kadri Kerge

Index Scriptorium Estoniae

Kerge, Maris

2010-01-01

Rekonstrueeritud Baltika tööstushoonest: Moetänavast ja AS Baltika büroodest. Projekteerija, sisearhitektuur büroode osas: Studio 3 (4 arhitekti), büroo Kolm Pluss Üks (9 arhitekti). Sisearhitektuur Moetänava osas: Pekka Porkanen, Maris Kerge, Ott Kangur, Maire Milder, Lembit-Kaur Stöör, Ülo-Tarmo Stöör, Lauri Eltermaa, Pärtel Eelma. Projekt: 2007-2009, valmis: 2009

Voice and Body: Emotional Proximity and Physical Distance in Marie de France’s ‘Laustic’

OpenAIRE

Zisa, Jessica

2015-01-01

Through the lens of feminist theoretical questions and gender studies, this paper explores the relationship between voice and body and the emotional and physical distance that occurs between genders in Marie de France’s Laustic. As a medieval woman writer, Marie provides a textual space to examine the emotional closeness and psychological distance that occurs within the patriarchal structure that delineates gender relations within the convention of marriage. This lai or poetic narrative artic...

Tritium distribution on plasma facing graphite tiles of JT-60U

International Nuclear Information System (INIS)

Tanabe, T.; Sugiyama, K.; Masaki, K.; Gotoh, Y.; Tobita, K.; Miya, N.

2003-01-01

Tritium distributions on the graphite divertor tiles, the dome units and the baffle plates of JT-60U were successfully measured. Poloidally, the highest tritium level was found at the dome top tiles and the outer baffle plates, where the plasma did not hit directly. On the other hand, although the toroidal tritium profiles on each tiles appeared uniform, detailed profiles in full toroidal direction clearly showed a periodic variation corresponding to the position of the magnetic field coils, indicating the ripple loss of high energy tritons as suggested by the OFMC code. Finally, the temperature increase owing to the plasma heat load was found to release the once retained tritium. (author)

MaRIE; a proposed materials facility at Los Alamos National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Bourke, M.A.M. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

2009-06-15

This presentation will describe the current definition of a proposed new facility called MaRIE at Los Alamos National Laboratory. The concept is of decadal scope and is predicated on the collocation of a fourth-generation X-ray light source with a proton accelerator spallation neutron source and complementary synthesis and characterization capabilities. MaRIE is an acronym which stands for Matter-Radiation Interactions in Extremes. The facility has been conceived partly in response to the increasing role that control science is expected to play in materials research compared to observation science. If new materials are to be implemented in a timely fashion for the most aggressive conditions of proposed fission and fusion energy applications they will have to rely, at least in part, on models, simulations and scientific insight. Validation of these models will require measurements at spatial and temporal scales that have only recently become enabled by the latest generations of light sources. A hallmark of the MaRIE concept is an emphasis on in situ studies (under extreme neutron, photon and ion irradiation conditions) of the phenomena that lead to swelling, phase transformations, thermal properties and corrosion. Insights and data, relevant to atomistic and quantum mechanical models, are major goals, as well as the facilitation of rapid materials discovery. It is hoped that this presentation will solicit input on aspects of the facility definition that should be strengthened or diminished to meet the needs of the fission community. (authors)

The monster within: Mary Shelley's Frankenstein and a patient's fears of childbirth and mothering.

Science.gov (United States)

Almond, B R

1998-08-01

This paper explores the fantasy, widespread among women, of giving birth to a monster, particularly a psychological monster. The author hypothesises two central intrapsychic issues underlying these fears: monsters are viewed as 'incest babies' or as reflections of maternal aggression--evil, destructive parts of the mother passed on to the infant. Shame about femaleness is postulated as a third factor in the fear of producing something monstrous. Mary Shelley's novel, 'Frankenstein', is an iconic literary representation of these themes. The author presents and discusses some psychobiographical material about Mary Shelley, speculating on her motives for writing this novel and tracing the intrapsychic concerns about incest and aggression as reflected in the novel itself. Some recent feminist and psychoanalytic critical readings of 'Frankenstein' are referenced as they reflect on the novel's concern with themes of female sexuality and procreation. Clinical material from the author's own practice is presented to illustrate these fears, so similar to those with which Mary Shelley was dealing. A discussion, citing some relevant literature, follows.

Marie Nimier, au cœur du silence

Directory of Open Access Journals (Sweden)

Joëlle Papillon

2012-01-01

Full Text Available Dans La Reine du silence, Marie Nimier se confronte à la figure de son père, l’écrivain Roger Nimier, mort lorsqu’elle avait cinq ans. Elle y montre le poids qui pèse sur l’enfant d’écrivain, mais aussi celui de l’héritage du secret familial et de l’injonction au silence. La difficulté de l’élaboration de son récit de filiation se révèle dans les constants recommencements et reformulations, qui constituent la marque de la tension angoissante entre l’obligation de dire et celle de taire. In La Reine du silence, Marie Nimier confronts her father’s memory – the writer Roger Nimier, who died when she was five years old. The novel describes the burden of being a writer’s child, along with that of inheriting family secrets and submitting to a code of silence. The difficulty of recounting her relationship with her late father is evidenced by the narrator’s numerous “false starts” and her constant rewritings. The hesitant nature of the narration captures an anguish born of two irreconcilable obligations : the need to put things into words and the pressure to remain silent.

Angles of Refraction: The Letters of Mary Delany

Directory of Open Access Journals (Sweden)

Eleonora Chiavetta

2014-04-01

Full Text Available Mary Delany (1700-1788 is particularly famous for her paper-cuttings or ‘mosaicks’ based on botanical subjects. A very lively woman of fashion, she was close to Queen Charlotte and one of the Bluestocking Ladies. She left a vivid portrait of life and society in eighteenth century England and Ireland in the six volumes of her Autobiography and Letters, edited in 1861 by her descendant Lady Llanover. Her autobiography is made up of 18 letters sent to her most intimate friend, Margaret Cavendish, Duchess of Portland. The first letter is dated 1740, but in this, as in the following ones, Mrs. Delany narrates her past life to her friend, starting from the early years of her life, describing her unhappy marriage, financial difficulties as a widow, and family relationships. Along with these ‘autobiographical’ letters, other letters written by her to her sister Ann are introduced, which date to the periods of life Mrs. Delany is dealing with. The aim of this paper is to focus on the textual, linguistic and content differences between the two letter types, and analyse how the identity of Mary Delany is differently constructed and perceived in the explicit autobiographical letters addressed to the Duchess of Portland, and the ones written to her sister. 

Je vous salue Marie de Jean-Luc Godard : modalités et enjeux d’un retour du religieux au cinéma “Hail Mary, full of grace”, a film by Jean-Luc Godard

Directory of Open Access Journals (Sweden)

Natalie Malabre

2012-06-01

Full Text Available Est-il possible de filmer un sujet aussi sensible que celui de la virginité de Marie en dehors des références aux canons religieux ? Ce fut le défi de Jean-Luc Godard au milieu des années 1980, lorsqu’il réalisa Je vous salue Marie. Sans surprise, certains catholiques manifestèrent leur opposition. Mais d’autres essayèrent d’expliquer et de soutenir cette manière non traditionnelle d’approcher le mystère de la transcendance.Is it possible to film religious subject, a very sensitive one like the virginity of Mary, out of the references of religious stances? That was the challenge of Jean-Luc Godard in the middle of the 80’s when he promoted “Je vous salue Marie”. Without surprise, some Catholics demonstrated their opposition. But some of them tried to explain and support the untraditional way to approach the mystery of transcendence.

Impact of arcing on carbon and tungsten. From the observations in JT-60U, LHD, and NAGDIS-II

International Nuclear Information System (INIS)

Kajita, Shin; Fukumoto, Masakatsu; Nakano, Tomohide; Tokitani, Masayuki; Masuzaki, Suguru; Ohno, Noriyasu; Takamura, Shuichi; Yoshida, Naoaki; Ueda, Yoshio

2012-11-01

This paper assesses the impact of arcing in fusion devices based on the observations in JT-60U, LHD, and the linear divertor simulator NAGDIS-II. In NAGDIS-II, the demonstration experiments of arcing/unipolar arcing have been conducted by simulating the transient heat load using a pulsed laser; it was found that the arcing can be easily initiated on the helium irradiated nanostructured tungsten. By measuring the field emission current property from the helium irradiated tungsten surface, the initiation conditions are discussed. From the detailed analysis of JT-60U tiles, it is found that arcing phenomena occurred on carbon baffle plates. From the observation of the arc trails recorded on the baffle plate, the amount of the eroded materials is discussed. The arcing seemed to occur frequently on inner baffles rather than the outer baffles. From LHD, it is shown that the arcing can be initiated on nanostructured tungsten even without transient events. The erosion of tungsten by arcing will become an important issue in a fusion reactor, where helium fluence is significantly increased. (author)

Improvement on control system of the JT-60 radio frequency heating system

Energy Technology Data Exchange (ETDEWEB)

Shinozaki, Shin-ichi; Moriyama, Shinichi; Hiranai, Shinichi [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Sato, Fumiaki [Nippon Advanced Technology Co., Ltd., Tokai, Ibaraki (Japan)

2003-03-01

On the JT-60 radio frequency (RF) heating system, the decrease in the activity ratio was a problem because of the deterioration of the control system. To improve the reliability, we replaced CAMAC system for a power injection control system, which was a main cause of the trouble, with the microprocessor system. And, a function of computer supported programming function of RF power injection form was introduced, which contributed to reduce a load of operators. Furthermore, personal computers with network communication were introduced to improve a maintenance ability of the control system. As a result, the activity ratio of the RF heating system was improved significantly. (author)

ON THE CULT OF MARY OF DANIEL ZIELIŃSKI IN THE LIGHT OF THE "PREFACE" TO "SZATA WZORZYSTA DOSKONAŁOŚCI" (1649

Directory of Open Access Journals (Sweden)

Katarzyna Kaczor-Scheitler

2017-10-01

Full Text Available This article presents the issues tackled in the “Preface” to "Szata wzorzysta doskonałości, zakonnicę w oczach Boskich zdobiąca i wszelkim stanom ludzi żyć duchownie pragnących pożyteczna" ("The Patterned Robe of Perfection Worn by the Nun before the Eyes of God and Useful to All People Wishing to Lead a Spiritual Life" (Kraków 1649 by Daniel Zieliński, a Bernadine from Alwernia. Noteworthy in this work, orientated toward awakening prayer activity and promoting religious life, is the dedication to Mary, which constitutes an expression of the tribute to Mary made by the author as well as a testimony of his personal experience. The article shows that the “Preface” was written for the purpose of the cult of Mary and constitutes a testimony of the spirituality of the post-tridentine era. The author also reflected on the cult of Mary in Polish Catholicism, as manifested in the christenings, scapulars and rosaries, Marian Sodalities, the increasing role of sanctuaries to Mary (including Jasna Góra, Kalwaria Zebrzydowska and the related pilgrimage movement. The cult of Mary was spread through prayer books, sermons, religious poetry and devotional books.

Maris polarization in neutron-rich nuclei

Directory of Open Access Journals (Sweden)

Shubhchintak

2018-03-01

Full Text Available We present a theoretical study of the Maris polarization effect and its application in quasi-free reactions to assess information on the structure of exotic nuclei. In particular, we explore the dependence of the polarization effect on neutron excess and neutron-skin thickness. We discuss the uncertainties in the calculations of triple differential cross sections and of analyzing powers due the choices of various nucleon–nucleon interactions and optical potentials and the limitations of the method. Our study implies that polarization variables in (p, 2p reactions in inverse kinematics can be an effective probe of single-particle structure of nuclei in radioactive-beam facilities.

Maris polarization in neutron-rich nuclei

Science.gov (United States)

Shubhchintak; Bertulani, C. A.; Aumann, T.

2018-03-01

We present a theoretical study of the Maris polarization effect and its application in quasi-free reactions to assess information on the structure of exotic nuclei. In particular, we explore the dependence of the polarization effect on neutron excess and neutron-skin thickness. We discuss the uncertainties in the calculations of triple differential cross sections and of analyzing powers due the choices of various nucleon-nucleon interactions and optical potentials and the limitations of the method. Our study implies that polarization variables in (p, 2p) reactions in inverse kinematics can be an effective probe of single-particle structure of nuclei in radioactive-beam facilities.

Marie Underi ühe luuletuse ümber / August Eelmäe

Index Scriptorium Estoniae

Eelmäe, August, 1931-

2003-01-01

Marie Underi luuletusest "Me ootame" ja selle vaheredaktsioonist, avaldatud pealkirjaga "Üks päev" (Oma Maa, 1947, nr. 2). Ilmunud ka kogumikus: Eelmäe, August. Kõned ja kirjatööd. Tallinn : Underi ja Tuglase Kirjanduskeskus, 2006, lk. 56-71

Mari Koger : avatud magamistoaga korter pööningukorrusel / Gitte Hint

Index Scriptorium Estoniae

Hint, Gitte

2003-01-01

Korter Nõmmel renoveeritud puumajas (arhitekt Hannes Niineväli). Sisearhitekt Mari Koger, tema kommentaarid. Söögilaua alumiiniumist valatud jalgade autor on Taavi Aunre. Söögilauda valgustab Alberto Meda ja Paolo Rizzatto disainitud lamp Titania. Ill.: plaan, 8 värv. vaadet

The life and legacy of Marie Curie.

OpenAIRE

Rockwell, Sara

2003-01-01

Marie Curie was a remarkable woman whose discoveries broke new ground in physics and chemistry and also opened the door for advances in engineering, biology, and medicine. She broke new ground for women in science: she was, for example, the first woman to receive a doctor of science degree in France, the first woman to win Nobel Prize, the first woman to lecture at the Sorbonne, the first person to win two Nobel Prizes, and the first Nobel Laureate whose child also won a Nobel Prize. Her life...

Physics of strong internal transport barriers in JT-60U reversed-magnetic-shear plasmas

Energy Technology Data Exchange (ETDEWEB)

Hayashi, N; Takizuka, T; Sakamoto, Y; Fujita, T; Kamada, Y; Ide, S; Koide, Y [Japan Atomic Energy Agency, 801-1 Mukouyama, Naka, Ibaraki 311-0193 (Japan)

2006-05-15

The physics of strong internal transport barriers (ITBs) in JT-60U reversed-magnetic-shear (RS) plasmas has been studied through the modelling on the 1.5 dimensional transport simulation. The key physics to produce two scalings on the basis of the JT-60U box-type ITB database are identified. As for the scaling for the narrow ITB width proportional to the ion poloidal gyroradius, the following three physics are important: (1) the sharp reduction of the anomalous transport below the neoclassical level in the RS region, (2) the autonomous formation of pressure and current profiles through the neoclassical transport and the bootstrap current and (3) the large difference between the neoclassical transport and the anomalous transport in the normal-shear region. As for the scaling for the energy confinement inside ITB ({epsilon}{sub f}{beta}{sub p,core} {approx} 0.25, where {epsilon}{sub f} is the inverse aspect ratio at the ITB foot and {beta}{sub p,core} is the core poloidal beta value), the value of 0.25 is found to be a saturation value due to the MHD equilibrium. The value of {epsilon}{sub f}{beta}{sub p,core} reaches the saturation value, when the box-type ITB is formed in the strong RS plasma with a large asymmetry of the poloidal magnetic field, regardless of the details of the transport and the non-inductively driven current.

XAS studies of the effectiveness of iron chelating treatments of Mary Rose timbers

International Nuclear Information System (INIS)

Berko, A; Schofield, E J; Chadwick, A V; Smith, A D; Jones, A M; Mosselmans, J F W

2009-01-01

The oxidation of sulfur in marine archaeological timbers under museum storage conditions is a recently identified problem, particularly for major artefacts such as historic ships excavated from the seabed. Recent work on the Vasa has stressed the role of iron in catalysing the oxidative degradation of the wood cellulose and the polyethylene glycols used to restore mechanical integrity to the timbers. In developing new treatment protocols for the long term preservation of Henry VIII of England's flagship, the Mary Rose, we are investigating the potential of chelating agents to neutralise and remove the iron products from the ships timbers. We have explored the use of aqueous solutions of chelating agents of calcium phytate, ethylenediaminetetraacetic acid (EDTA), diethylenetriaminepentaacetic acid (DTPA) and ammonium citrate to extract the iron compounds. All of these solutions exhibit some level of iron removal; however the key is to find the most effective concentration at pH of around 7 of the reagent solution, to minimise the treatment time and find the most cost-effective treatment for the whole of the Mary Rose hull. Fe K-edge XAFS data from samples of Mary Rose timbers, before and after treatment by the chelating agents mentioned has been collected. The data collected provide valuable insights into the effectiveness of the treatment solutions.

Design study of a time-of-flight neutron spectrometer for JT-60U

International Nuclear Information System (INIS)

Elevant, T.; Hoek, M.; Nishitani, Takeo.

1993-06-01

A time-of-flight neutron spectrometer is proposed for measurements of neutron energy spectra from deuterium-deuterium reactions in JT-60U tokamak plasmas. The sensitivity of the instrument is 2 · 10 -2 cm 2 , energy resolution is 4.5 % (FWHM) and maximum useful count-rate is 6 kHz. Analysis of neutron energy spectra will provide information on central ion temperatures larger than ∼ 4 keV with an accuracy of ± 10 %, and neutron source fraction from reactions between thermal ions with an accuracy of ± 15 %. The minimum time required for data acquisition is 0.1 s. (author)

Rannaprotsesside anatoomia laserskaneerimise skalpelliga / Maris Eelsalu, Artu Ellmann, Kalev Julge ... [jt.

Index Scriptorium Estoniae

2014-01-01

Ajavahemikus 2008-2013 Pirita rannas läbi viidud uurimuses demonstreeriti lennukil paikneva (ALS) ja rannale paigaldatud (TLS) mõõdistusseadmete abil tehtava laserskaneerimise võimalusi ranna kolmemõõtmelise topograafia ajaliste muutuste analüüsimiseks

Development of fast charge exchange recombination spectroscopy by using interference filter method in JT-60U

International Nuclear Information System (INIS)

Kobayashi, Shinji; Sakasai, Akira; Koide, Yoshihiko; Sakamoto, Yoshiteru; Kamada, Yutaka; Hatae, Takaki; Oyama, Naoyuki; Miura, Yukitoshi

2003-01-01

Recent developments and results of fast charge exchange recombination spectroscopy (CXRS) using interference filter method are reported. In order to measure the rapid change of the ion temperature and rotation velocity under collapse or transition phenomena with high-time resolution, two types of interference filter systems were applied to the CXRS diagnostics on the JT-60U Tokamak. One can determine the Doppler broadening and Doppler shift of the CXR emission using three interference filters having slightly different center wavelengths. A rapid estimation method of the temperature ad rotation velocity without non-linear least square fitting is presented. The modification of the three-filters system enables us to improve the minimum time resolution up to 0.8 ms, which is better than that of 16.7 ms for the conventional CXRS system using the CCD detector in JT-60U. The other system having seven wavelength channels is newly fabricated to crosscheck the results obtained by the three-filters assembly, that is, to verify that the CXR emission forms a Gaussian profile under collapse phenomena. In a H-mode discharge having giant edge localized modes, the results obtained by the two systems are compared. The applicability of the three-filters system to the measurement of rapid changes in temperature and rotation velocity is demonstrated. (author)

Characteristics of halo current in JT-60U

International Nuclear Information System (INIS)

Neyatani, Y.; Nakamura, Y.; Yoshino, R.; Hatae, T.

1999-01-01

Halo currents and their toroidal peaking factor (TPF) have been measured in JT-60U by Rogowski coil type halo current sensors. The electron temperature in the halo region was around 10 eV at 1 ms before the timing of the maximum halo current. The maximum TPF*I h /I p0 was 0.52 in the operational range of I p = 0.7 ∼ 1.8 MA, B T = 2.2 ∼ 3.5 T, including ITER design parameters of κ > 1.6 and q 95 = 3, which was lower than that of the maximum value of ITER data base (0.75). The magnitude of halo currents tended to decrease with the increase in stored energy just before the energy quench and with the line integrated electron density at the time of the maximum halo current. A termination technique in which the current channel remains stationary was useful to avoid halo current generation. Intense neon gas puffing during the VDE was effective for reducing the halo currents. (author)

Characteristics of halo current in JT-60U

International Nuclear Information System (INIS)

Neyatani, Y.; Nakamura, Y.; Yoshino, R.; Hatae, T.

2001-01-01

Halo currents and their toroidal peaking factor (TPF) have been measured in JT-60U by Rogowski coil type halo current sensors. The electron temperature in the halo region was around 10 eV at 1 ms before the timing of the maximum halo current. The maximum TPF *I h /I p0 was 0.52 in the operational range of I p =0.7∼1.8MA, B T =2.2∼3.5T, including ITER design parameters of κ>1.6 and q 95 =3, which was lower than that of the maximum value of ITER data base (0.75). The magnitude of halo currents tended to decrease with the increase in stored energy just before the energy quench and with the line integrated electron density at the time of the maximum halo current. A termination technique in which the current channel remains stationary was useful to avoid halo current generation. Intense neon gas puffing during the VDE was effective for reducing the halo currents. (author)

Deuterated-decaborane using boronization on JT-60U

Energy Technology Data Exchange (ETDEWEB)

Yagyu, Jun-ichi; Arai, Takashi; Kaminaga, Atsushi; Miyata, Katsuyuki [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Arai, Masaru [Kaihatsu Denki Co., Ltd., Tokyo (Japan)

2001-03-01

In JT-60U, boronization using hydride-decaborane (B{sub 10}H{sub 14}) vaporization has been conducted for the first wall conditioning. Compared to other discharge cleaning (DC), boronization is claimed to be efficient in reduction of oxygen impurities and hydrogen recycling in plasma. However, there are some problems in reduction of hydrogen included in boron film and stabilization of DC glow discharge during the boronization. To solve these problems, a new boronization method using deuterated-decaborane (B{sub 10}D{sub 14}) was adopted instead of the conventional hydride-decaborane. As a result, hydrogen content in the boron film decreased clearly and discharge conditioning shots, for decreasing hydrogen content in plasmas, after the boronization were reduced to 1/10 in comparison to the conventional process. Furthermore, DC glow discharge became stable, with only helium carrier gas, and it was possible to save 30 hours in maximum of the time necessary to boronization. It is shown that the boronization using deuterated-decaborane is very efficient and effective method for the first wall conditioning. (author)

Technical aspects and manufacturing methods for JT-60SA toroidal field coil casings

International Nuclear Information System (INIS)

Rossi, Paolo; Cucchiaro, A.; Brolatti, G.; Cocilovo, V.; Ginoulhiac, G.; Polli, G.; Gabriele, M.; Di Muzio, F.; Philips, G.; Tomarchio, V.

2014-01-01

Highlights: • A contract between ENEA and Walter Tosto started on July 2012 for the construction of 18 TF coil casings for JT-60SA. • Design and manufacturing of mock-ups representative of straight and curved legs of the casings have been completed. • Final design of the casings has been completed and manufacturing activities have already started and are ongoing. • The completion of the first three casings will be completed within the end of 2013 and the production of all the 18 casings is foreseen by the end of 2015. - Abstract: JT-60SA is a superconducting tokamak machine to be assembled in Naka site, Japan, designed to contribute to the early realization of fusion energy by supporting the exploitation of ITER and research toward DEMO. In the frame of the Broader Approach Agreement a contract between ENEA and Walter Tosto (Chieti, Italy) started on July 2012 for the construction of 18 TF coil casings for JT-60SA. Two different sets of 9 casings each will be progressively delivered, from 2013 to the end of 2015, to ASG Superconductors (Genoa, Italy) and to Alstom (Belfort, France), where the integration of the winding pack into the casing will be carried out. Each TF coil casing (height 7.5 m and width 4.5 m) consists of four main components: one “Straight Leg Outboard” and one “Curved Leg Outboard” both with their own covers, “Straight Leg Inboard” and “Curved Leg Inboard”. The casing components are segmented in forgings and plates made of FM316LNL. The straight leg outboard is composed of two wings welded to a central core and two elbows welded at the ends with a cooling channel installed inside. Elbows of straight leg outboard are segmented in two half-elbows machined from 1 rough forging and welded to the central core made by plate. Welding of wings to the central core is performed in EBW (electron beam welding) and the straight part is welded to the elbows by NGTIG (TIG narrow gap) process. The curved leg outboard is composed of two

Technical aspects and manufacturing methods for JT-60SA toroidal field coil casings

Energy Technology Data Exchange (ETDEWEB)

Rossi, Paolo, E-mail: paolo.rossi@enea.it [ENEA, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Cucchiaro, A.; Brolatti, G.; Cocilovo, V.; Ginoulhiac, G.; Polli, G. [ENEA, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Gabriele, M.; Di Muzio, F. [Walter Tosto, Via Erasmo Piaggio, 66100 Chieti (Italy); Philips, G.; Tomarchio, V. [JT-60SA European Home Team, Boltzmannstrasse 2, D-85748 Garching (Germany)

2014-10-15

Highlights: • A contract between ENEA and Walter Tosto started on July 2012 for the construction of 18 TF coil casings for JT-60SA. • Design and manufacturing of mock-ups representative of straight and curved legs of the casings have been completed. • Final design of the casings has been completed and manufacturing activities have already started and are ongoing. • The completion of the first three casings will be completed within the end of 2013 and the production of all the 18 casings is foreseen by the end of 2015. - Abstract: JT-60SA is a superconducting tokamak machine to be assembled in Naka site, Japan, designed to contribute to the early realization of fusion energy by supporting the exploitation of ITER and research toward DEMO. In the frame of the Broader Approach Agreement a contract between ENEA and Walter Tosto (Chieti, Italy) started on July 2012 for the construction of 18 TF coil casings for JT-60SA. Two different sets of 9 casings each will be progressively delivered, from 2013 to the end of 2015, to ASG Superconductors (Genoa, Italy) and to Alstom (Belfort, France), where the integration of the winding pack into the casing will be carried out. Each TF coil casing (height 7.5 m and width 4.5 m) consists of four main components: one “Straight Leg Outboard” and one “Curved Leg Outboard” both with their own covers, “Straight Leg Inboard” and “Curved Leg Inboard”. The casing components are segmented in forgings and plates made of FM316LNL. The straight leg outboard is composed of two wings welded to a central core and two elbows welded at the ends with a cooling channel installed inside. Elbows of straight leg outboard are segmented in two half-elbows machined from 1 rough forging and welded to the central core made by plate. Welding of wings to the central core is performed in EBW (electron beam welding) and the straight part is welded to the elbows by NGTIG (TIG narrow gap) process. The curved leg outboard is composed of two

Computer system for the beam line data processing at JT-60 prototype neutral beam injector

International Nuclear Information System (INIS)

Horiike, Hiroshi; Kawai, Mikito; Ohara, Yoshihiro

1987-08-01

The present report describes the hard and soft wares of the data acquisition computer system for the prototype neutral injector unit for JT-60. In order to operate the unit, more than hundreds of signals of the beam line components have to be measured. These are mainly differential thermometers for the coolant waters and thermocouples for the beam dump components but not include those for the cryo system. Since the unit operates in a series of pulses, the measurement should be conducted very quickly in order to ensure the simultaneity of large number of the measured data. The present system actualize fast data acquisition using a small computer of 128 kB and measuring instruments connected through the bus. The system is connected to the JAERI computer center since the data capacity is fairly large to completely process them by the small computer. Therefore the measured data can be transferred to the computer center to calculate there, and the results can be received. After the system was completed the computer quickly print out the power flow data, which needed much work to calculate with hands. This system was very useful. It enhanced the experiments at the unit and reduced the labor. It enables us to early demonstrate the rated operation of the unit and to accurately estimate such operation data of the JT-60 NBI as the injection power. (author)

Work and safety managements for on-site installation, commissioning, tests by EU of quench protection circuits for JT-60SA

International Nuclear Information System (INIS)

Yamauchi, Kunihito; Okano, Jun; Shimada, Katsuhiro; Ohmori, Yoshikazu; Terakado, Tsunehisa; Matsukawa, Makoto; Koide, Yoshihiko; Kobayashi, Kazuhiro; Ikeda, Yoshitaka; Fukumoto, Masahiro; Kushita, Kouhei N.

2016-03-01

The superconducting Satellite Tokamak machine “JT-60SA” under construction in Naka Fusion Institute is an international collaborative project between Japan Atomic Energy Agency (JAEA) as the Implementing Agency (IA) of Japan (JA) and Fusion for Energy (F4E) as the IA of Europe (EU). The contributions for this project are based on the supply of components, and thus European manufacturer shall conduct the installation, commissioning and tests on Naka site under the general supervision by F4E via the designated institute in each EU nation. This means that JAEA had an issue to manage the works by European workers and their safety although there is no direct contract. This report describes the approaches for the work and safety managements, which were agreed with EU after the negotiation, and the completed on-site works for Quench Protection Circuits (QPC) as the first experience for EU in JT-60SA project. (author)

Detailed Analysis of the Transient Voltage in a JT-60SA PF Coil Circuit

International Nuclear Information System (INIS)

Yamauchi, K.; Shimada, K.; Terakado, T.; Matsukawa, M.; Coletti, R.; Lampasi, A.; Gaio, E.; Coletti, A.; Novello, L.

2013-01-01

A superconducting coil system is actually complicated by the distributed parameters, e.g. the distributed mutual inductance among turns and the distributed capacitance between adjacent conductors. In this paper, such a complicated system was modeled with a reasonably simplified circuit network with lumped parameters. Then, a detailed circuit analysis was conducted to evaluate the possible voltage transient in the coil circuit. As a result, an appropriate (minimum) snubber capacitance for the Switching Network Unit, which is a fast high voltage generation circuit in JT-60SA, was obtained. (fusion engineering)

Spécificité pastorale de la personnalité de Jean-Paul II selon Jean-Marie Lustiger

Directory of Open Access Journals (Sweden)

Ryszard Biernat

2011-04-01

Full Text Available Jean-Marie Lustiger admired John Paul II and he was devoted to him. They both had similar origin. The Cardinal of Paris often accompanied the pope in his pastoral visits. He perceived John Paul II as the man of Providence. He was convinced that God had prepared him to this role. Jean-Marie Lustiger emphasized the attitudes of John Paul II that attracted the attention and admiration of observers. For instance: pray, holiness, attentive pastor and good relation with young people. Jean-Marie Lustiger as an attentive observer also focused his attention on the pastoral methods of John Paul II. In his utterances he often perceived the following methods: each person was important, defense of person’s dignity, the ability to speak with each man, modern language, importance of the pastoral visits and sui generis spiritual pedagogic. Jean-Marie Lustiger noticed radical change of perspective in preaching and in pastoral action of John Paul II. According to him the pope perceived the challenges of the modern times, evaluated needs of the humanity and gave the appropriate answers. For these he did not choose politics, sociology or even anthropology as a re fl ection but addressed to the hurt human who was redeem by Jesus Christ.

Dr. Mary McLeod Bethune: A Life Devoted to Service

Science.gov (United States)

Long, Kim Cliett

2011-01-01

The purpose of this paper is to explore and analyze the leadership traits of Dr. Mary McLeod Bethune, an African-American woman of history, using the servant leadership theory developed by Robert K. Greenberg and the ten characteristics of servant leadership as conceived by Larry C. Spears. This exploration seeks to identify the significant…

Flood-inundation maps for the St. Marys River at Decatur, Indiana

Science.gov (United States)

Strauch, Kellan R.

2015-08-24

Digital flood-inundation maps for an 8.9-mile reach of the St. Marys River at Decatur, Indiana, were developed by the U.S. Geological Survey (USGS), in cooperation with the Indiana Office of Community and Rural Affairs. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site (http://water.usgs.gov/osw/flood_inundation/), depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) of the St. Marys River at Decatur (USGS station number 04181500). The maps are useful for estimating near-real-time areas of inundation by referencing concurrent USGS streamgage information at http://waterdata.usgs.gov/. In addition, the streamgage information was provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service flood warning system (http:/water.weather.gov/ahps/). NWS-forecasted peak-stage information may be used in conjunction with the maps developed during this study to show predicted areas of flood inundation.

Romanticism or Reality? An Exploration of Frances Mary Hendry's "Chandra."

Science.gov (United States)

Johnson, Jilaine

This paper singles out a novel written for children about India, "Chandra" (1995) by Frances Mary Hendry, as a powerful and useful novel to present to today's 11 to 14 year old students. The paper contends that the novel allows students to explore and consider different value systems, challenges them to become aware of prejudice and the…

Keelatud kanep mõjub ohutumalt kui seadustatud alkohol ja tubakas / Mari Järvelaid

Index Scriptorium Estoniae

Järvelaid, Mari, 1956-

2009-01-01

Meditsiiniteaduste doktor kirjeldab kanepi teaduslikult uuritud toimeid ja leiab, et kanepi võiks Eestis legaliseerida küll. Lisa: kanepi tarvitamisega tekkivad sümptomid ; Mari Järvelaidi viis soovitust kanepitarvitajale

The light of the word in Ljubica Marić's music

Directory of Open Access Journals (Sweden)

Makević Zorica

2009-01-01

Full Text Available Ljubica Marić's music provides manifold encouragements for consideration in the light of the Logos, according to the teaching exposed in the prologue of the Gospel by St. John. It speaks of the essential inconceivability of time and life, which have their cause in God and His Logos. Seeing through and praising 'the logos of things' guide all its aspects: the tone reveals itself as a vibration, as the energy of lasting and existing, as the beginning of every time and motion; the sonority of different instrumental media is freely expressed and mutually determined in co-action with specific musical and contextual moments; the rhythm evades every regularity and mechanicalness, by which both single duration's and the whole metro-rhythmic course gain a vivid expression. The entire shape of the work is also taken from the reality of psychological and historical time, from its unreductable dynamics, being always in a vivid connection with the space, origin and tradition. The respect for 'the truth of things', the awe before the mystery of time and existence, which call upon the very principle of life in the divine Logos are obvious in everything. Designation of man as a being of light and reason created in the image of God to be the likeness of His being, is expressed in Ljubica Marić's music by the measure of human pulse taken as the basic tempo of her entire opus. Ljubica Marić expressed her consciousness of the reason as a special gift to the man by extremely careful treatment of the words - its meanings, melodies, rhythms, which she always considered the very source of music. The relation between the word and the voice - its sonorous body - is shown in the cantata Songs of Space (1956 as a mystery of the encounter of the Logos and the matter. In relation to her earlier works, this one is a marked breakthrough of the composer's authentic 'voice', which will find its full identity only after receiving the divine Word, symbolized by the melodies of

Charcot-Marie-Tooth disease complicating type 2 diabetes.

LENUS (Irish Health Repository)

Win, Htet Htet Ne

2012-02-01

Although both conditions are relatively common, there are very few descriptions of type 2 diabetes mellitus coexisting with Charcot-Marie-Tooth disease (CMT). This case report and literature review describes a 53-year-old Irish man who presented with type 2 diabetes and significant neuropathy, and who was subsequently diagnosed with CMT type 1A. This case report will also discuss how to differentiate diabetic neuropathy from a progressive hereditary neuropathy and how coexistence aggravates the progression of neuropathy thus necessitating early diagnosis.

Charcot-marie-tooth disease complicating type 2 diabetes.

LENUS (Irish Health Repository)

Win, Htet Htet Ne

2011-07-01

Although both conditions are relatively common, there are very few descriptions of type 2 diabetes mellitus coexisting with Charcot-Marie-Tooth disease (CMT). This case report and literature review describes a 53-year-old Irish man who presented with type 2 diabetes and significant neuropathy, and who was subsequently diagnosed with CMT type 1A. This case report will also discuss how to differentiate diabetic neuropathy from a progressive hereditary neuropathy and how coexistence aggravates the progression of neuropathy thus necessitating early diagnosis.

Marie Curie - science was her life

International Nuclear Information System (INIS)

Wolschendorf, K.

1998-01-01

In this paper a short survey of the life and the work of Marie Curie is presented. She was born in 1867 in Warsaw/Poland and went to Paris in 1891 to study physics, mathematics, and chemistry. In 1895 the married the physicist Pierre Curie, and together they began research work on radioactivity. For her doctorate she investigated various radiating substances and discovered the radioactive element Radium in 1898. She was awarded the Nobel Prize in Physics in 1903, and later on the Nobel Prize in Chemistry in 1911 for performing pioneering studies with radium and contributing profoundly to the understanding of radioactivity. In 1934 she died in a health resort due to leukemia. (orig.) [de

Uned, mida mujal ei näe / Heilika Võsu ; interv. Mari Laaniste

Index Scriptorium Estoniae

Võsu, Heilika

2007-01-01

PÖFFi animafilmide festivali "Animated Dreams" (21.-25. XI kinos Sõprus), mis on seekord pühendatud Nukufilmi 50. juubelile, tutvustab festivali peakorraldaja. Võistluskavas on Eestist Kaspar Jancise "Maraton" ja Mari-Liis Bassovskaja - Jelena Girlini "Kleit". Lisatud festivali kava

Recent results on steady state and confinement improvement research on JT-60U

International Nuclear Information System (INIS)

Ide, Shunsuke

2000-01-01

On the JT-60U tokamak, fusion plasma research for realization of a steady state tokamak reactor has been pursued. Towards that goal, confinement improved plasmas such as H-mode, high β p , reversed magnetic shear (RS) and latter two combined with H-mode edge pedestal have been developed and investigated intensively. A key issue to achieve non-inductive current drive relevant to a steady state fusion reactor is to increase the fraction of the bootstrap current and match the spatial profile to the optimum. In 1999, as the result of the optimization, the equivalent deuterium-tritium (D-T) fusion gain (Q DT eq ) of 0.5 was sustained for 0.8 s, which is roughly equal to the energy confinement time, in a RS plasma. In order to achieve a RS plasma in steady state two approach have been explored. One is to use external current driver such as lower hybrid current drive (LHCD), and by optimizing LHCD a quasi-steady RS discharge was obtained. The other approach is to utilize bootstrap current as much as possible, and with highly increased fraction of the bootstrap current, a confinement enhancement factor of 3.6 was maintained for 2.7 s in a RS plasma with H-mode edge. A heating and current drive system in the electron cyclotron range of frequency for localized heating and current drive has been installed on JT-60U, and in initial experiments a clear increase of the central electron temperature in a RS high density central region was confirmed only with injected power of 0.75 MW. (author)

Tarvo Hanno Varres, Mari-Leen Kiipli / Merilin Talumaa, Hanno Soans, Tatjana Kozlova-Johannes

Index Scriptorium Estoniae

Talumaa, Merilin, 1986-

2015-01-01

Vaatluse alla on võetud Tarvo Hanno Varrese heli- ja videoinstallatsioon "Lindistav põrand" (2015) ja heli- ja videoteos "Betweenland" (2014) ning Mari-Leen Kiipli fotoseeria "The school of dreams" (2012-2015)

Status of JT-60 data processing system

International Nuclear Information System (INIS)

Matsuda, T.; Tsugita, T.; Oshima, T.; Sakata, S.; Sato, M.; Koiwa, M.; Aoyagi, T.

2000-01-01

The JT-60 data processing system is a large computer complex and gradually modernized by utilizing progressing computer and network technology. There are two major changes in our system. A main computer of FACOM M-780 has been replaced with compatible GS8300 using state-of-art CMOS technology, which results in lower power and space usage with nearly the same performance. Now it can handle ∼500 MB of data per discharge. A gigabit ethernet switch with FDDI ports has been introduced to cope with the increase of handling data. The switch will connect a tera-byte (TB) data server at the bandwidth of a gigabit per second with the main computer and many data acquisition workstations. Other developments in our system are the realization of three workstation-based plans, the TB data server, the VME-based fast data acquisition system and a CICU. The TB data server is basically a UNIX workstation with ∼100 GB RAID disks and ∼900 GB MO auto-exchangers. The VME-based fast data acquisition system has been developed to enlarge the present TMDS. The CICU, which has a function of interfacing the main computer with the CAMAC system, has been replaced with the workstation-based system after the fine tuning

Strange bedfellows: Cervantes and Mary Wollstonecraft Shelley

Directory of Open Access Journals (Sweden)

Alfredo Moro

2017-11-01

Full Text Available Miguel de Cervantes and Mary Shelley do seem, at first sight, two strange bedfellows. Notwithstanding the evident differences between the narrative of both authors, the English novelist showed a notable interest for the life and works of Miguel de Cervantes throughout her literary career. This article intends to offer a precise portrait of the Cervantean interests of the author of Frankenstein, tracing these through her personal correspondence, her narrative production, and finally, through her contribution to the realm of Cervantean studies: Shelley’s Life of Cervantes (1837, published in Dyonisius Lardner’s Cabinet Cyclopaedia.

Overview of JT-60U progress towards steady-state advanced tokamak

International Nuclear Information System (INIS)

Ide, S.

2005-01-01

Recent experimental results on steady state advanced tokamak (AT) research on JT-60U are presented with emphasis on longer time scale in comparison with characteristics time scales in plasmas. Towards this, modification on control in operation, heating and diagnostics systems have been done. As the results, ∼ 60 s I p flat top and an ∼ 30 s H-mode are obtained. The long pulse modification has opened a door into a new domain for JT-60U. The high normalized beta (β N ) of 2.3 is maintained for 22.3 s and 2.5 for 16.5 s in a high β p H-mode plasma. A standard ELMy H-mode plasma is also extended and change in wall recycling in such a longer time scale has been unveiled. Development and investigation of plasmas relevant to AT operation has been continued in former 15 s discharges as well in which higherNB power (≤ 10 s) is available. Higher β N ∼ 3 is maintained for 6.2 s in high β p H-mode plasmas. High bootstrap current fraction (f BS ) of ∼ 75% is sustained for 7.4 s in an RS plasma. On NTM suppression by localized ECCD, ECRF injection preceding the mode saturation is found to be more effective to suppress the mode with less power compared to the injection after the mode saturated. The domain of the NTM suppression experiments is extended to the high β N regime, and effectiveness of m/n=3/2 mode suppression by ECCD is demonstrated at β N ∼ 2.5-3. Genuine center-solenoid less tokamak plasma start up is demonstrated. In a current hole region, it is shown that no scheme drives a current in any direction. Detailed measurement in both spatial and energy spaces of energetic ions showed dynamic change in the energetic ion profile at collective instabilities. Impact of toroidal plasma rotation on ELM behaviors is clarified in grassy ELM and QH domains. (author)

Numerical investigation of transient behaviour of the recuperative heat exchanger in a MR J-T cryocooler using different heat transfer correlations

Science.gov (United States)

Damle, R. M.; Ardhapurkar, P. M.; Atrey, M. D.

2016-12-01

In J-T cryocoolers operating with mixed refrigerants (nitrogen-hydrocarbons), the recuperative heat exchange takes place under two-phase conditions. Simultaneous boiling of the low pressure stream and condensation of the high pressure stream results in higher heat transfer coefficients. The mixture composition, operating conditions and the heat exchanger design are crucial for obtaining the required cryogenic temperature. In this work, a one-dimensional transient algorithm is developed for the simulation of the two-phase heat transfer in the recuperative heat exchanger of a mixed refrigerant J-T cryocooler. Modified correlation is used for flow boiling of the high pressure fluid while different condensation correlations are employed with and without the correction for the low pressure fluid. Simulations are carried out for different mixture compositions and numerical predictions are compared with the experimental data. The overall heat transfer is predicted reasonably well and the qualitative trends of the temperature profiles are also captured by the developed numerical model.

Investigation and measures to noise on spectroscopic measurement system in JT-60U

International Nuclear Information System (INIS)

Nagaya, Susumu; Kubo, Hirotaka; Sugie, Tatsuo; Onizawa, Masami; Kawai, Isao; Nakata, Hisao.

1997-11-01

Breakdown of a negative-ion-based neutral beam injection (N-NBI) has caused noise trouble to several systems. The control circuit of a spectroscopic measurement system had not well worked because of the noise. The noise has been measured by an optical-fiber isolation system during operation of JT-60U. The amplitude and the frequency were 15-18 V and 15 MHz respectively. The transmission noise has been reduced by putting ferrite cores to all cables connecting with the control circuits. As a result, the trouble with the spectroscopic measurement system has completely been solved. Adding condensers and resistors to the circuit was not effective to reduce the noise. (author)

Design optimization of JT-60SU for steady-state advanced operation

International Nuclear Information System (INIS)

Ushigusa, K.; Kurita, G.; Toyoshima, N.

2001-01-01

Design optimization of JT-60SU has been done for a steady-state advanced operation. A transport code simulation indicates that a fully non-inductive reversed shear plasmas with fractions of 70% of the bootstrap current and 30% of beam driven current can be sustained for more than 1,000s without any additional control. Investigations have been progressed on MHD stability, vertical positional stability and dynamics of the vertical displacement events. Significant progress has been achieved in the R and D of Nb 3 Al superconducting wires, low induced activation material (Fe-Cr-Mn steel). A design improvement has been made in TF coils to reduce a local stress on radial disk. Dynamic behaviors of the tokamak machine have been analyzed at emergency events such as an earthquake. (author)

Mart ja Mari-Ann Susi taotlevad omanikena Concordia pankrotti / Andri Maimets

Index Scriptorium Estoniae

Maimets, Andri

2003-01-01

Concordia Ülikooli rektori kohast loobunud Mart Susi ning prorektori ametikohalt lahkunud Mari-Ann Susi taotlevad neile kuuluvat ülikooli pidanud miljonivõlgades firma pankrotti. Hiljuti loodi õppejõududest, tudengitest js töötajatest mittetulundusühing Concordia Akadeemiline Ühisus (CAU), selle nõukogu esimees on Hagi Šein

Walt Disney Meets Mary Daly: Invention, Imagination, and the Construction of Community.

Science.gov (United States)

Covino, William A.

2000-01-01

Posits Walt Disney as an influential sorcerer in the process of integrating the real world into Disney's synthetic universe, and Mary Daly's work "Wickedary" as a work that constructs an alternative "magic kingdom" through an insistence on an anti-patriarchal lexicon. (NH)

Rediscovering the Art of Developmental Therapy: An Interview with Mary M. Wood

Science.gov (United States)

Teagarden, James M.; Kaff, Marilyn S.; Zabel, Robert H.

2013-01-01

Dr. Mary Margaret Wood is best known for developing psychoeducational programs that integrate mental health and special education interventions for children with emotional and behavioral disorders (EBD). Developmental Therapy (DT) includes comprehensive assessment of student behavior, communication, social, and cognitive development,…

Design of a new P-NBI control system for 100-s injection in JT-60SA

International Nuclear Information System (INIS)

Okano, F.; Shinozaki, S.; Honda, A.; Ooshima, K.; Numazawa, S.; Ikeda, Y.

2008-01-01

Modification of JT-60U to a superconducting device (so-called JT-60SA) has been planned to contribute to ITER and DEMO. The positive-ion-based NBI system (P-NBI) is required to inject 24 MW for 100 s with 12 units. The P-NBI control system is to be fully remodeled with PLC (Programmable Logic Controller), which is featured by high market availability, system extensibility, cost-effectiveness, and independent development in programming. One of the critical issues to apply the PLC to the P-NBI control system is to control quickly the high voltage power supplies within 200 μs. For this purpose, the fastest PLC dealing with 4 refresh words at the processing time of 200 μs is to be employed. The second issue is to construct a data acquisition system for such a large number of data channels (∼2300 digital and ∼1300 analog data channels). The use of PLC linked with PC-based data measurement devices via Ethernet allows processing the large number of channels. The third issue is to make the man-machine interface simple. The marketed software giving an easy product of graphic menus is available for PLC programming. From these results, it is expected that commercial PLC could be applied to the large-scale control system of the P-NBI system for 100 s operations

Mechanical strength evaluation of the welded bellows for the ports of the JT-60 vacuum vessel

International Nuclear Information System (INIS)

Takatso, H.; Shimizu, M.; Yamamoto, M.

1983-01-01

Mechanical strength of the welded bellows for the ports of the JT-60 vacuum vessel was evaluated, laying the emphasis on the fatigue strength under the torsional electromagnetic force. The welded bellows were designed to be loaded with the forced deflection due to the relative displacement between the vacuum vessel and the external fixed point, the atmospheric pressure and the forced torsional angle due to the electromagnetic force. Stresses caused by the former two were estimated following the formulae proposed by the Kellogg Company. On the other hand, two formulae were established to estimate the stress caused by the last, after examining experimentally the behavior of the welded bellows under the torsional load; one is the shearing stress evaluation formula and the other is the axial bending stress evaluation formula. It was found that the welded bellows can easily buckle under the torsional load and the former formula corresponds to the case of non-buckling and the latter to the case of buckling. The present mechanical strength evaluation method was applied to the three kinds of the welded bellows to be used in the ports of the JT-60 vacuum vessel (neutral beam injection ports, vacuum pumping ports and the adjustable limiter ports) and it was confirmed that they have sufficient strength in the range of the design load conditions

Flower Power: Desire, Gender, and Folk Belief in the Joycean Mary Garden

Directory of Open Access Journals (Sweden)

Christin Mulligan

2017-06-01

Full Text Available Robert Brazeau and Derek Gladwin’s Eco-Joyce (2014 largely overlooks a historical basis for ecocritical thought. The absence of a historicist view requires consideration not only of the natural world but folk botany, such as the Mary Garden that is a phantom presence in A Portrait of the Artist as a Young Man as well as in “Nausicaa” and “Penelope” in Ulysses and Finnegans Wake. The undergrowth of the garden reconfigures human action and subtly predicts it with its compendium of theological and devotional meanings for the burgeoning sexuality expressed by Gerty MacDowell and Issy Earwicker as well as the mature longing of Molly Bloom. This essay will establish a fresh Deleuzian paradigm of Becoming-Flower to demonstrate how the Mary Garden blooms to present new perspectives on Catholicism, eros, and gender identity in Joyce’s major works.

Maria Carolina and Marie Antoinette: Sisters and Queens in the mirror of Jacobin Public Opinion

Directory of Open Access Journals (Sweden)

Cinzia Recca

2014-09-01

Full Text Available Marie Antoinette of Franceand Maria Carolina of Naples, both consorts, contributed to a flourishing of matronage, reproducing conceptions of royal femininity that embraced both the private and public roles they were expected to fulfil. However, while the political role of the first Queen has been largely reconsidered, her sister Maria Carolina has not yet been adjudicated impartially. This is somewhat curious, because Maria Carolina inherited from her sister the same disregard towards the Revolution and this, as perceived by the Jacobins, was duly proposed in their acrimonious criticism of her political role. This paper aims to focus on this criticism, analysing how the charges against Maria Carolina in the post-French revolutionary period, were a political duplication of the Jacobin attacks on Marie Antoinette from 1791 onwards. From this point of view, the paper will focus on the portrait of Maria Carolina in 1793 revolutionary Parisby Giuseppe Gorani, an Italian Jacobin noble. His Mémoires Secrets – where Maria Carolina was represented as a wicked woman in the same terms previously employed to denounce her sister Marie Antoinette by the French Republicans – was well known across Italy. This subject dominated the main pamphlets and brochures published in Naples in 1799, during the brief duration of the Neapolitan Republic, because it legitimised the rebellion against the monarchy. After the fall of the Neapolitan Republic, the political attacks on Maria Carolina continued likewise in France, where many Neapolitan patriots were obliged to flee. Analysing  Giuseppe Gorani’s Mémoires we gather that the portrait of Marie Antoinette’s sister was painted according to the main stereotypes of  French revolutionary political culture.

Long-term trends in the St. Marys River open water fish community

Science.gov (United States)

Schaeffer, Jeffrey S.; Fielder, David G.; Godby, Neal; Bowen, Anjanette; O'Connor, Lisa; Parrish, Josh; Greenwood, Susan; Chong, Stephen; Wright, Greg

2011-01-01

We examined trends in species composition and abundance of the St. Marys River fish community. Abundance data were available approximately once every six years from 1975 through 2006, and size and age data were available from 1995 through 2006. We also compared survey data in 2006 with results of a concurrent creel survey that year, as well as data from prior surveys spanning a 69 year time frame. The St. Marys River fish community was best characterized as a coolwater fish community with apparent little variation in species composition, and only slight variation in overall fish abundance since 1975. However, we did find recent trends in abundance among target species sought by anglers: centrarchids increased, percids appeared stable, and both northern pike Esox lucius and cisco Coregonus artedii declined. Survey results suggested that walleye (Sander vitreus) and yellow perch (Perca flavescens) experienced moderate exploitation but benefited from recent strong recruitment and faster growth. Mechanisms underlying declines of northern pike and cisco were not clear; reduced abundance could have resulted from high exploitation, variation in recruitment, or a combination of both factors. Despite these challenges, the St. Marys River fish community appears remarkably stable. We suggest that managers insure that creel surveys occur simultaneously with assessments, but periodic gill net surveys may no longer provide adequate data in support of recent, more complex management objectives. While additional surveys would add costs, more frequent data might ensure sustainability of a unique fish community that supports a large proportion of angler effort on Lake Huron.

Experimental transport analysis code system in JT-60

International Nuclear Information System (INIS)

Hirayama, Toshio; Shimizu, Katsuhiro; Tani, Keiji; Shirai, Hiroshi; Kikuchi, Mitsuru

1988-03-01

Transport analysis codes have been developed in order to study confinement properties related to particle and energy balance in ohmically and neutral beam heated plasmas of JT-60. The analysis procedure is divided into three steps as follows: 1) LOOK ; The shape of the plasma boundary is identified with a fast boundary identification code of FBI by using magnetic data, and flux surfaces are calculated with a MHD equilibrium code of SELENE. The diagnostic data are mapped to flux surfaces for neutral beam heating calculation and/or for radial transport analysis. 2) OFMC ; On the basis of transformed data, an orbit following Monte Carlo code of OFMC calculates both profiles of power deposition and particle source of neutral beam injected into a plasma. 3) SCOOP ; In the last stage, a one dimensional transport code of SCOOP solves particle and energy balance for electron and ion, in order to evaluate transport coefficients as well as global parameters such as energy confinement time and the stored energy. The analysis results are provided to a data bank of DARTS that is used to find an overview of important consideration on confinement with a regression analysis code of RAC. (author)

Geraldine Reymenants, Marie Elisabeth Belpaire. Gender en macht in het literaire veld 1900-1940

Directory of Open Access Journals (Sweden)

Monica Soeting

2017-02-01

Full Text Available Geraldine Reymenants, Marie Elisabeth Belpaire. Gender en macht in het literaire veld 1900-1940 (kadoc-studies 35; Leuven: Universitaire Pers Leuven, 2013, 288 pp., isbn 9789058679444.

Characteristics of internal transport barrier in JT-60U reversed shear plasmas

International Nuclear Information System (INIS)

Sakamoto, Y.; Kamada, Y.; Ide, S.; Fujita, T.; Shirai, H.; Takizuka, T.; Koide, Y.; Fukuda, T.; Oikawa, T.; Suzuki, T.; Shinohara, K.; Yoshino, R.

2001-01-01

Characteristics of internal transport barrier (ITB) structure are studied and the active ITB control has been developed in JT-60U reversed shear plasmas. The following results are found. Outward propagation of the ITB with steep T i gradient is limited to the minimum safety factor location (ρ qmin ). However the ITB with reduced T i gradient can move to the outside of ρ qmin . Lower boundary of ITB width is proportional to the ion poloidal gyroradius at the ITB center. Furthermore the demonstration of the active control of the ITB strength based on the modification of the radial electric field shear profile is successfully performed by the toroidal momentum injection in different directions or the increase of heating power by neutral beams. (author)

Marie-Sklodowska Curie, pioneer of Medical Physics and inspiration for women scientists; Marie-Sklodowska Curie, pionera de la Física Médica y fuente de inspiración para mujeres científi cas

Energy Technology Data Exchange (ETDEWEB)

Martín, G.

2017-11-01

The International Organization for Medical Physics (IOMP) celebrates annually the International Day of Medical Physics (IDMP) for which the 7th November, the birthday of Marie Sklodowska Curie, a most exceptional character in science at all and a pioneer of Medical Physics, has been chosen. This year, the IDMP is devoted to women in Medical Physics to honour the 150th anniversary of Marie Curie’s birthday. This article briefly outlines her outstanding personality, her fundamental discovery of the radioactivity and other scientific achievements for which she was awarded two Nobel Prizes, and her extensive collaboration with industry, far less well known. Finally, a brief review of the fundamental legacy she left the humanity in Medicine, Science and for women scientists is presented. [Spanish] La IOMP (Organización Internacional de Física Médica) celebra cada año el Día Internacional de la Física Médica (IDMP), el 7 de noviembre, en honor al nacimiento de Marie Sklodowska-Curie, un personaje excepcional en la historia de la ciencia y pionera de la Física Médica. Este año, en conmemoración del 150º aniversario de su nacimiento, el IDMP está dedicado a las mujeres en Física Médica. El siguiente artículo sobre Marie Curie describe brevemente su destacada personalidad, su descubrimiento fundamental de la radiactividad y otros logros científicos que la hicieron merecedora de dos Premios Nobel, y su extensa colaboración con la industria, faceta ésta desconocida en general. Finalmente, se hace un breve recorrido por el legado fundamental que dejó a la humanidad en Medicina, en Ciencia y para las mujeres científicas.

Online Opportunist: Mary Ellen Icaza--Montgomery County Public Libraries, Rockville, MD

Science.gov (United States)

Library Journal, 2004

2004-01-01

When Mary Ellen Icaza became Electronic Services Librarian at Montgomery County Public Libraries, she noticed that the readers' services information on the library web site was invisible, even to librarians. "And if staff can't find it," she says, "customers can't." She set out to help people find that material-and to turn a…

Life as the Middle Child: A Conversation With Mary Margaret Kerr

Science.gov (United States)

Teagarden, James M.; Zabel, Robert H.; Kaff, Marilyn S.

2015-01-01

As part of an ongoing oral history project, a conversation was held with Dr. Mary Margaret Kerr on the past, present, and possible future of the field of providing services to children with emotional-behavioral disorders. Dr. Wood stresses the increasing importance of providing an interdisciplinary approach to meet the needs for children or, as…

An Analysis of the Symptomatic Domains Most Relevant to Charcot Marie Tooth Neuropathy (CMT) Patients

Science.gov (United States)

2017-06-09

Charcot Marie Tooth Disease (CMT); Hereditary Sensory and Motor Neuropathy; Nerve Compression Syndromes; Tooth Diseases; Congenital Abnormalities; Genetic Diseases, Inborn; Heredodegenerative Disorders, Nervous System

A Sinner or a Saint: the image of Mary, Queen of Scots in the works of Friedrich Schiller, Juliusz Słowacki and Stefan Zweig

Directory of Open Access Journals (Sweden)

Melkov Andrey Sergeevich

2017-04-01

Full Text Available The artistic image of Mary, Queen of Scots in the works of F. Schiller, J. Słowacki and S. Zweig are researched in the article. The Queen’s life, character, inner world and psychological portrait appear on the pages of the classicists’ works in the context of the era she lived. The turbulent historical processes that took place in England and Scotland at the end of the Middle Ages and the beginning of the Early Modern Period led to the phenomenon of Mary Stuart’s personality. Obviously the creativity of the authors whose works were dedicated to Mary I of Scotland was influenced by the experience learned from the lessons of their time. It was reflected in the classicists’ analyses and description of the past. Romanticistsof the 19th century, F. Schiller and J. Słowacki, interpreted the personality of Mary Stuart in the sinner/saint dichotomy, but S. Zweig at the historic break in the 30s of the 20th century departed from the unilateralism of such an approach. In his romanced biography of Mary, Queen of Scots he tells about the rises and falls of his heroine. S. Zweig presents Mary I of Scotland as a wonderful, passionate and suffering woman, who even 400 years after her death inspires and excites peoples’ minds and hearts.

Analyses of the impact of connections’ layout on the coil transient voltage at the Quench Protection Circuit intervention in JT-60SA

International Nuclear Information System (INIS)

Maistrello, Alberto; Gaio, Elena; Novello, Luca; Matsukawa, Makoto; Yamauchi, Kunihito

2015-01-01

The transient overvoltages associated to the interruption of high direct currents with high current derivative, at the base of the operation of a Quench Protection System for Superconducting Coils, have been studied, with particular reference to the JT-60SA project, which adopt edge technology solutions for current interruption: a Hybrid mechanical-static Circuit Breaker as main circuit breaker in series with a PyroBreaker as backup protection. The paper reports in particular on the analyses of the intervention of the backup circuit breaker in the final circuital conditions, considering the actual power connections that will be implemented on Site. The key elements which influence the peak value of the voltage and the relation existing among the different stray impedances of the circuit are identified, thus giving general guidelines for the design of the layout of the power connections. The specific case of JT-60SA is considered, but general criteria can be derived.

Hand involvement in children with Charcot-Marie-Tooth disease type 1A

NARCIS (Netherlands)

Burns, Joshua; Bray, Paula; Cross, Lauren A.; North, Kathryn N.; Ryan, Monique M.; Ouvrier, Robert A.

2008-01-01

Charcot-Marie-Tooth disease type 1A (CMT1A), a demyelinating neuropathy characterised by progressive length-dependent muscle weakness and atrophy, is thought to affect the foot and leg first followed some time later by hand weakness and dysfunction. We aimed to characterise hand Strength, function

Re-Birthing the Monstrous: James Whale's (Mis)Reading of Mary Shelley's "Frankenstein."

Science.gov (United States)

Picart, Caroline Joan S.

1998-01-01

Contributes to scholarship on film and feminism by showing how James Whale's film attempts to excise or severely delimit the disturbing critique of the Romantic politics of gender in Mary Shelley's novel "Frankenstein." Discusses parthenogenesis, showing how the novel critiques the Romantic rhetorical reconstructions of masculine…

Surface studies of tungsten erosion and deposition in JT-60U

International Nuclear Information System (INIS)

Ueda, Y.; Fukumoto, M.; Nishikawa, M.; Tanabe, T.; Miya, N.; Arai, T.; Masaki, K.; Ishimoto, Y.; Tsuzuki, K.; Asakura, N.

2007-01-01

In order to study tungsten erosion and migration in JT-60U, 13 W tiles have been installed in the outer divertor region and tungsten deposition on graphite tiles was measured. Dense local tungsten deposition was observed on a CFC tile toroidally adjacent to the W tiles, which resulted from prompt ionization and short range migration of tungsten along field lines. Tungsten deposition with relatively high surface density was found on an inner divertor tile around standard inner strike positions and on an outer wing tile of a dome. On the outer wing tile, tungsten deposition was relatively high compared with carbon deposition. In addition, roughly uniform tungsten depth distribution near the upper edge of the inner divertor tile was observed. This could be due to lift-up of strike point positions in selected 25 shots and tungsten flow in the SOL plasma

Costume Cinema and Materiality Telling the Story of Marie Antoinette through Dress

Directory of Open Access Journals (Sweden)

Therése Andersson

2011-04-01

Full Text Available In ‘Costume Cinema and Materiality: Telling the Story of Marie Antoinette through Dress’ a materiality-based approach for analysing film narratives through costumes is examined. Sofia Coppola’s film Marie Antoinette (2006 serves as the empirical starting point and the theme of dressing and redressing is pursued throughout the film, crystallizing costume as a significant feature for reading the movie. The article argues that costumes, on a symbolic level, work as agents. It thus focuses on the interdependence between costume and interpretations of the screenplay’s main character. A theoretical notion of costumes and materiality is explored, and the idea is further developed in relation to stylistics constituted as emotions materialised in costume. As costumes are the main object for analysis, the discussion immediately centres on costumes produced by professional costume designers for the two-dimensional format of the film frame. In other words, costumes made for the moment: for a specific narrative and aesthetic expression.

Factors affecting groundwater quality at the rehabilitated Mary Kathleen Tailings Dam, Australia

International Nuclear Information System (INIS)

Ward, T.A.; Hart, K.P.; Morton, W.H.; Levins, D.M.

1984-01-01

The Mary Kathleen uranium mine and treatment plant ceased operation in late 1982 and a plan for the closure and rehabilitation of the area was developed by Mary Kathleen Uranium Ltd in association with consultants. This paper describes some of the groundwater quality studies undertaken in support of the rehabilitation program including sampling within the tailings dam to determine the profile of radionuclides, accelerated leaching tests on tailings to estimate long-term release rates of radium, monitoring of piezometers to determine the rate of movement of contaminants, and disposal of acidic effluent by neutralization and ion exchange through infiltration trenches. From accelerated leaching tests, it is estimated that a maximum of 0.13% of 226 Ra will be leached from the tailings in the first 1,000 years. There is no evidence that uranium or any of its daughters is moving away from the waste disposal area. The movement of heavy metals, radionuclides and acidity is strongly retarded by the alkaline soils

Activation analysis for JT-60U experiments with deuterium gases

International Nuclear Information System (INIS)

Miya, Naoyuki

1993-11-01

Identification of radionuclides and evaluation of dose rate level have been made on the structural materials of the JT-60U tokamak device. A one-dimensional neutron and gamma-ray transport code ANISN and an induced activation calculation code CINAC are used in this work. Radionuclides of 56 Mn (High-Mn steel toroidal field coil case), 58 Co (Inconel-625 vessel) and 60 Co (SS-316 first wall supporting material) appeared on the structures, which contribute to the dose rate around a vacuum vessel. Cobalt-58 and 60 Co with long half-life time intensely make residual activation in the time of 3 days to 3 months corresponding to the maintenance time after shutdown. The calculated dose rate on the vessel agreed well with the measured data in the first 2 years D-D operations. The one-dimensional code provided a sufficient prediction for the dose rate, although an error due to the toroidal field coil modeling in the calculation is estimated within ∼30%. (author)

Mechanical properties of JT-60 tokamak machine in power tests

International Nuclear Information System (INIS)

Takatsu, Hideyuki; Ohkubo, Minoru; Yamamoto, Masahiro; Ohta, Mitsuru

1986-01-01

JT-60 power tests were carried out from Dec. 10, 1984 to Feb. 20, 1985 to demonstrate, in advance of actual plasma operation, satisfactory performance of tokamak machine, power suppliers and control system in combination. The tests began with low power test of individual coil systems and progressed to full power tests. The coil current was raised step by step, monitoring the mechanical, thermal, electrical and vacuum data. Power tests were concluded with successful results. All of the coil systems were raised up to full power operation in combination and system performance was verified including the structural integrity of tokamak machine. Measured strain and deflection showed good agreements with those predicted in the design, which was an evidence that electromagnetic forces were supported as expected in the design. A few limitations to machine operation was made clear quantitatively. And it was found that existing detectors were insufficient to monitor machine integrity and two kinds of detector were proposed to be installed. (author)

Taking Stock: Marie Nimier’s Textual Cabinet of Curiosities

Directory of Open Access Journals (Sweden)

Adrienne Angelo

2014-01-01

Full Text Available In many life-writing projects, the seemingly innocuous description of heteroclite objects and how those objects are stored and recalled in fact plays an important role in demonstrating their importance to the process of memory work. At once the lingering traces of one’s past and also an aggregation of stories evoked by an examination of them, these curios focus attention on the relationship between the individual and the storage of memories. This article will focus on certain collectibles, collections and collectors that appear throughout the fictional, autobiographical and autofictional world that Marie Nimier has scripted to date. This textual cabinet of curiosities and the act of collecting more generally serve as a trope to connect memory with materiality, despite the numerous narrative voices that Nimier assumes—voices that move from a first-person “Marie Nimier” to an unnamed, although clearly identifiable first-person and even float between genders. Despite this nominal and narrational fluidity, objects function to guarantee recognition, both for the reader, and, especially, for the author herself. What is at stake in this intertextual assemblage of objects is not only the roles that they play in allowing the narrator to revisit past traumas and loss, but also in connecting the author’s presence to other, more fictionalized voices that above all signify the primacy of life-writing in her corpus.

Fast collimated neutron flux measurement using stilbene scintillator and flashy analog-to-digital converter in JT-60U

International Nuclear Information System (INIS)

Ishikawa, M.; Itoga, T.; Okuji, T.; Nakhostin, M.; Shinohara, K.; Hayashi, T.; Sukegawa, A.; Baba, M.; Nishitani, T.

2006-01-01

A line-integrated neutron emission profile is routinely measured using the radial neutron collimator system in JT-60U tokamak. Stilbene neuron detectors (SNDs), which combine a stilbene organic crystal scintillation detector (SD) with an analog neutron-gamma pulse shape discrimination (PSD) circuit, have been used to measure collimated neutron flux. Although the SND has many advantages as a neutron detector, the maximum count rate is limited up to ∼1x10 5 counts/s due to the analog PSD circuit. To overcome this issue, a digital signal processing system (DSPS) using a flash analog-to-digital converter (Acqiris DC252, 8 GHz, 10 bits) has been developed at Cyclotron and Radioisotope Center in Tohoku University. In this system anode signals from photomultiplier of the SD are directory stored and digitized. Then, the PSD between neutrons and gamma rays is performed using software. The DSPS has been installed in the vertical neutron collimator system in JT-60U and applied to deuterium experiments. It is confirmed that the PSD is sufficiently performed and collimated neutron flux is successfully measured with count rate up to ∼5x10 5 counts/s without the effect of pileup of detected pulses. The performance of the DSPS as a neutron detector, which supersedes the SND, is demonstrated

Strangers and Orphans: Knowledge and Mutuality in Mary Shelley's "Frankenstein"

Science.gov (United States)

Gomez, Claudia Rozas

2013-01-01

Paulo Freire consistently upheld humanization and mutuality as educational ideals. This article argues that conceptualizations of knowledge and how knowledge is sought and produced play a role in fostering humanization and mutuality in educational contexts. Drawing on Mary Shelley's novel "Frankenstein," this article focuses on the…

Two cases of bovine hypertrophic osteopathy (Marie-Bamberger's disease)

International Nuclear Information System (INIS)

Ravary, B.; Fecteau, G.

2002-01-01

Two cattle were presented with persistent lameness and Marie-Bamberger's disease was suspected because of the generalised deformity of the distal limbs. The diagnosis was confirmed after further tests (radiography, post-mortem and anatomopathological examinations). The first case was probably caused by a pulmonary infection. The cause of the second case could not be fully determined. The bony lesions characteristic of this condition result from stimulation of the osteogenic layer of the periosteum, and results from neoplasic lesions, pulmonary abscesses, bronchopneumonia, etc [it

Numerical simulation of a high-brightness lithium ion gun for a Zeeman polarimetry on JT-60U

International Nuclear Information System (INIS)

Kojima, Atsushi; Kamiya, Kensaku; Fujita, Takaaki; Kamada, Yutaka; Iguchi, Harukazu

2007-01-01

A lithium ion gun is under construction for a lithium beam Zeeman polarimetry on JT-60U. The performance of the prototype ion gun has been estimated by the numerical simulation taking the space charge effects into account. The target values of the ion gun are the beam energy of 30 keV, the beam current of 10 mA and the beam divergence angle within 0.13 degrees. The low divergence of 0.13 degrees is required for the geometry of the Zeeman polarimetry on JT-60U where the observation area is 6.5 m away from the neutralizer. The numerical simulation needs to be carried out for the design study because the requirement of the divergence angle is severe for the development of the high-brightness ion gun. The simulation results show the beam loss of 50% caused by the clash to the electrode such as the cathode and the neutralizer. Moreover, the beam transport efficiency from the neutralizer to the observation area is low due to the broadening of the divergence angle. The total beam efficiency is about 5%. Extracted beam profile affects the beam focusing and the efficiency. The peaked profile achieves better efficiency than the hollow one. As a result, beam current of 1 mA is obtained at the observation area by the simulation for the prototype ion gun. (author)

Creating an Online Exhibit in a First-Year Seminar: “Luxury Objects in the Age of Marie Antoinette”

Directory of Open Access Journals (Sweden)

Janie Vanpée

2013-04-01

Full Text Available How can students arrive at a closer understanding of the material culture that shaped the lives of the French aristocracy and nascent bourgeoisie of late eighteenth-century France? This is one of the challenges that students face in the first-year seminar, Re-Membering Marie Antoinette, as they study the multiple and conflicting ways that Marie Antoinette was and has been represented in biographies, portraits, memoirs, fiction, film, fashion, plays and pornographic pamphlets, records of her trial in 1793, and the spaces and activies that shaped her daily life. This article focuses on a series of scaffolded assignments that lead students to imagine what Marie Antoinette’s daily life might have been like by exploring the material culture of the period through the objects, decor, and activities depicted in Moreau le Jeune’s series of engravings, Le Monument du Costume, and the craftsmanship, labor, and social practices they entail as described in Diderot and d’Alembert’s Encyclopédie.

Development and upgrade of new real time processor in JT-60 data processing system

International Nuclear Information System (INIS)

Sakata, Shinya; Koiwa, Motonao; Matsuda, Toshiaki; Aoyagi, Tetsuo

2000-07-01

At the beginning of JT-60 experiments, the real time processor (RTP) in the data processing system was mainly constructed by PANAFACOM U-1500. As the computer became superannuated, however, it gradually became difficult to maintain both hardware and software. A performance of a recent UNIX workstation has been remarkably progressed. The UNIX workstation has a large flexibility for user application programs, an easiness for maintenance of the hardware and an ability of expansion to peripheral devices. Therefore, the RTP system is newly reconstructed by using the UNIX workstation. This report describes the overview, the basic design and the recent upgrade on the RTP in the data processing system. (author)

Design of tangential viewing phase contrast imaging for turbulence measurements in JT-60SA

Energy Technology Data Exchange (ETDEWEB)

Tanaka, K., E-mail: ktanaka@nifs.ac.jp [National Institute for Fusion Science, Toki, Gifu 509-5292 (Japan); Department of Advanced Energy Engineering, Kyushu University, Kasuga, Fukuoka 816-8580 (Japan); Coda, S. [EPFL–SPC, Lausanne (Switzerland); Yoshida, M.; Sasao, H.; Kawano, Y.; Imazawa, R.; Kubo, H.; Kamada, Y. [National Institutes for Quantum and Radiological Science and Technology, Naka, Ibaraki 311-0193 (Japan)

2016-11-15

A tangential viewing phase contrast imaging system is being designed for the JT-60SA tokamak to investigate microturbulence. In order to obtain localized information on the turbulence, a spatial-filtering technique is applied, based on magnetic shearing. The tangential viewing geometry enhances the radial localization. The probing laser beam is injected tangentially and traverses the entire plasma region including both low and high field sides. The spatial resolution for an Internal Transport Barrier discharge is estimated at 30%–70% of the minor radius at k = 5 cm{sup −1}, which is the typical expected wave number of ion scale turbulence such as ion temperature gradient/trapped electron mode.

Structural design of vacuum bulkheads in piping penetration for the cryostat base of JT-60SA

International Nuclear Information System (INIS)

Nakamura, Shigetoshi; Shibama, Yusuke K.; Masaki, Kei

2016-11-01

This study examined the structure of the boundary box that is capable of installing the cryostat base of JT-60SA in a narrow space. Since other devices stand close in the neighborhood, it was designed to fit within a limited space to avoid interference. Spatial limitation and generated stress caused by each load were used as design conditions. From the calculation results of the generated stress with respect to each load, the maximum stress is generated by the displacement of the pipeline associated with the displacement of the vacuum container at the time of earthquake and 200degC baking, so bellows were designed to absorb the displacement of the piping. It was confirmed through 3-D finite element analysis that this generated stress is less than the allowable stress and there is no problem in structural integrity. This paper explained the composition of major equipment of JT-60SA and the structure of cryostat base. In the structural analysis of the boundary box, consideration was given to the pressure difference during vacuum closure or abnormal events, temperature distribution, pipe displacement associated with the deformation of vacuum vessel, and seismic load. As a result of finite element analysis, it was confirmed that the displacement amount and temperature distribution during plasma operation and baking were within the allowable range. In addition, the maximum stress during cryostat helium leak was also within the allowable range. (A.O.)

The ties that bind: Soil surveyor William Edgar Tharp and oceanographic cartographer Marie Tharp

Science.gov (United States)

Landa, Edward R.

The link between soil science and geology is personified in the American father and daughter: soil surveyor William Edgar Tharp (1870-1959) and oceanographic cartographer Marie Tharp (1920-2006). From 1904 to 1935, W.E. Tharp mapped soils in 14 states for the US Department of Agriculture, and campaigned during the late 1920s-early 1930s to raise awareness of the high rates of soil erosion from croplands. The lifestyle of the federal soil surveyor in the United States during the early 20th century involved frequent household moves, and it played a formative role in Marie Tharp’s childhood. Her path to a career in geology was molded by this family experience, by mentors encountered in the classroom, and by social barriers that faced women scientists of that era.

Uus nobelist : prantslane Jean-Marie Gustave Le Clézio / Kaarel Kressa

Index Scriptorium Estoniae

Kressa, Kaarel, 1983-

2008-01-01

Nobeli kirjandusauhind 2008 - prantsuse romaanikirjanik Jean-Marie Gustave Le Clézio. Sisaldab autori eesti keelde tõlgitud teoste annotatsioone: Päev, mil Beaumont tegi tutvust oma valuga : [novell] / tlk. Merike Riives (kogumikust Prantsuse novell, 1973); Kõrb / tlk. Kristiina Ross (Eesti Raamat, 1990); Diego ja Frida / tlk. Sirje Keevallik (Kunst, 2007)

Localized MHD activity near transport barriers in JT-60U and TFTR

International Nuclear Information System (INIS)

Manickam, J.

2001-01-01

Localized MHD activity observed in JT-60U and TFTR near transport barriers with their associated large pressure gradients is investigated. Stability analysis of equilibria modeling the experiments supports an identification of this MHD as being due to an ideal MHD n=1 instability. The appearance of the instability depends on the local pressure gradient, local shear in the q profile and the proximity of rational surfaces where q∼m/n and m and n are the poloidal and toroidal mode numbers respectively. The mode width is shown to depend on the local value of q, and is larger when q is smaller. In addition the role of the edge current density in coupling the internal mode to the plasma edge and of the energetic particles which can drive fishbone like modes is investigated. (author)

Radiation loss and global energy balance of ohmically heated divertor discharge in JT-60 tokamak

International Nuclear Information System (INIS)

Koide, Yoshihiko; Yamada, Kimio; Yoshida, Hidetoshi; Nakamura, Hiroo; Niikura, Setsuo; Tsuji, Shunji

1986-03-01

Divertor experiment in JT-60 with a small divertor chamber has been successfully performed up to 1.6 MA discharge. Several divertor effects were experimentally confirmed as follows. Radiation loss in main plasma saturates with the increase of plasma current and its ratio to the input power is about 20 % at 1.5 MA. The rest of input power is exhausted into the divertor chamber and a half of it is dissipated as the radiation loss. Impurity accumulation is not observed during a few sec without internal MHD activity and gross impurity confinement time is several hundred msec. (author)

Review of JT-60U experimental results in 2007 and 2008

International Nuclear Information System (INIS)

Isayama, Akihiko; Oyama, Naoyuki; Suzuki, Takahiro; Shinohara, Kouji; Sakamoto, Yoshiteru; Matsunaga, Go; Yoshida, Maiko; Asakura, Nobuyuki; Nakano, Tomohide; Kamiya, Kensaku; Itami, Kiyoshi

2010-02-01

Results in JT-60U experiments in 2007 and 2008 are reviewed. In this campaign, which is the final experimental period in JT-60U, development of advanced tokamak plasma was extensively performed toward establishment of physics basis of ITER and DEMO. High integrated performance plasma with high normalized beta (β N -2.6) and high confinement enhancement factor (H H98(y,2) -1.0-1.1), which are comparable to those in the ITER Hybrid Scenario, and at the same time with high bootstrap current fraction (f BS -40%) was sustained for 25 s. High density and high radiation loss fraction plasma was sustained for 12 s by adding argon and neon to a deuterium plasma. The duration of the high-performance plasmas is more than 10 times longer than the current diffusion time, τ R . In a high beta regime exceeding the ideal MHD limit without conducting wall (no-wall limit), a new instability was observed. By suppressing the instability a high beta plasma was sustained for 5 s, which corresponds to several times longer than τ R . Performance of reversed shear plasmas was significantly improved by utilizing the stabilizing effect of the conducting wall, and β N -2.7 and f BS -90% were obtained. These results significantly exceed those in the previous experimental campaign. In addition, real-time control system was improved, and ion temperature and current profile were independently or simultaneously controlled in real time. Development of new diagnostics was also continuously performed. For example, profiles of electron density and current were measured using the lithium beam probe diagnostic with high resolution. A number of important results from physics experiments were obtained in the area of transport, confinement, instability, plasma-wall interaction etc. Performance of heating and current drive systems was also extended significantly. In the electron cyclotron wave system, 2.9 MW for 5 s injection and 0.4 MW for 30 s injection to plasma were successfully demonstrated. Power

Rapport de frais de 2017-2018 pour Mary Anne Chambers | CRDI ...

International Development Research Centre (IDRC) Digital Library (Canada)

Rapport de frais de 2017-2018 pour Mary Anne Chambers. Total des frais de déplacement : CAD$17,362.55. Réunion du Conseil des gouverneurs. 19 novembre 2017 au 24 novembre 2017. CAD$2,185.41. Réunions au CRDI 1 novembre 2017 CAD$714.15. Constatation de l'impact de la recherche en Afrique de l'Est.

Mariátegui, Vallejo y la literatura peruana

OpenAIRE

Pérez, Alberto Julián

2007-01-01

Para enriquecer y superar la comprensión eurocéntrica histórica del fenómeno americano es preciso indagar en la reflexión que sobre éste realizan los propios pensadores de América. En este ocasión, nuestra particular elección ha recaído en José Carlos Mariátegui (1895-1930) y su obra Siete ensayos de interpretación de la realidad peruana (1928). Si bien su pensamiento fue poco formal, estuvo enriquecido por intuiciones y observaciones que aún esperan su oportunidad de tener un papel activo en...

[Mari Uusküla. Basic colour terms in Finno-Ugric and Slavonic Languages] / Galina Paramei

Index Scriptorium Estoniae

Paramei, Galina

2010-01-01

Arvustus: Uusküla, Mari. Basic colour terms in Finno-ugric and Slavonic languages: myths and facts. Tartu : Tartu University Press, 2008. Dissertationes linguisticae Universitatis Tartuensis, 1406-5657 ; 9

Marys Lake 69/115-kV transmission line upgrade and substation expansion projects

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-05-01

Western Area Power Administration (Western) and the Platte River Power Authority (Platte River) propose to upgrade portions of the existing electric transmission and substation system that serves the Town of Estes Park, Colorado. The existing transmission lines between the Estes Power Plant Switchyard and the Marys Lake Substation include a 115,000 volt (115-kV) line and 69,000 volt (69-kV) line. Approximately one mile is a double-circuit 115/69-kV line on steel lattice structures, and approximately two miles consists of separate single-circuit 115-kV and a 69-kV lines, constructed on wood H-Frame structures. Both lines were constructed in 1951 by the US Bureau of Reclamation. The existing transmission lines are on rights-of-way (ROW) that vary from 75 feet to 120 feet and are owned by Western. There are 48 landowners adjacent to the existing ROW. All of the houses were built adjacent to the existing ROW after the transmission lines were constructed. Upgrading the existing 69-kV transmission line between the Marys Lake Substation and the Estes Power Plant Switchyard to 115-kV and expanding the Marys Lake Substation was identified as the most effective way in which to improve electric service to Estes Park. The primary purpose and need of the proposed project is to improve the reliability of electric service to the Town of Estes Park. Lack of reliability has been a historical concern, and reliability will always be less than desired until physical improvements are made to the electrical facilities serving Estes Park.

Marys Lake 69/115-kV transmission line upgrade and substation expansion projects

International Nuclear Information System (INIS)

1996-05-01

Western Area Power Administration (Western) and the Platte River Power Authority (Platte River) propose to upgrade portions of the existing electric transmission and substation system that serves the Town of Estes Park, Colorado. The existing transmission lines between the Estes Power Plant Switchyard and the Marys Lake Substation include a 115,000 volt (115-kV) line and 69,000 volt (69-kV) line. Approximately one mile is a double-circuit 115/69-kV line on steel lattice structures, and approximately two miles consists of separate single-circuit 115-kV and a 69-kV lines, constructed on wood H-Frame structures. Both lines were constructed in 1951 by the US Bureau of Reclamation. The existing transmission lines are on rights-of-way (ROW) that vary from 75 feet to 120 feet and are owned by Western. There are 48 landowners adjacent to the existing ROW. All of the houses were built adjacent to the existing ROW after the transmission lines were constructed. Upgrading the existing 69-kV transmission line between the Marys Lake Substation and the Estes Power Plant Switchyard to 115-kV and expanding the Marys Lake Substation was identified as the most effective way in which to improve electric service to Estes Park. The primary purpose and need of the proposed project is to improve the reliability of electric service to the Town of Estes Park. Lack of reliability has been a historical concern, and reliability will always be less than desired until physical improvements are made to the electrical facilities serving Estes Park

Sisemine vabadus määrab identiteedi / Marie-Jo LaFontaine ; interv. Reet Varblane

Index Scriptorium Estoniae

LaFontaine, Marie-Jo

2001-01-01

Intervjuu belgia kunstniku Marie-Jo LaFontaine'iga 25. VII Rakveres. KanaNaha raames eksponeeritud M.-J. LaFontaine'i näitusest "Identiteedi ruum", tema fotodest lastest, kunstiturust Eestis ja Belgias, Belgia pankade kunstikogudest jm.

O marxismo indo-americano de Mariátegui e a polêmica com a III Internacional Comunista.

Directory of Open Access Journals (Sweden)

María Gabriela Guillén

2012-05-01

Full Text Available Partindo da perspectiva marxista indo-americana de José Carlos Mariátegui, o artigo visa a exposição de fatores teóricos e históricos que culminaram na polêmica com a III Internacional Comunista na América Latina. A problemática evidencia a originalidade do pensamento de Mariátegui, cujo eixo central é a interpretação dos fatos históricos, políticos e sociais latino-americanos sob a perspectiva dialética do desenvolvimento desigual e combinado para explicar a dinâmica particular da realidade peruana.

Mari sangari päeva sõnum / Jaak Prozes ; interv. Livia Viitol

Index Scriptorium Estoniae

Prozes, Jaak, 1965-

2006-01-01

Fenno-Ugria Hõimukeskuse juhataja ja Eestimaa Rahvaste Ühenduse juht soome-ugri rahvaste olukorrast Venemaal ja rahvusseltside tegevusest Eestis. Aprilli lõpul tähistasid marid oma rahvuspüha - mari sangari päeva. Pärimuse põhjal langes maride rahvuskangelane Boltu̧ võitluses oma rahva vabaduse eest 26. aprillil 1556

Uus kuum Eesti disain / Silvia Pärmann, Maris Takk

Index Scriptorium Estoniae

Pärmann, Silvia

2015-01-01

Karl Tauli disainitud taburet "Ämblu", Aap Piho puidust ümmargune laud, Marit Ilisoni tekkmantlid kollektsioonist "Longing for Sleep/Magada tahaks", Narma vaibakollektsioon "OPEN 2015/16" (disainerid Monika Järg, Kaidi Ploomipuu), Annike Laigo vaibakollektsioon "XX", Kairi Katmanni vaip "Storytellers", Valhalla Factory kollektsiooni "Daydreamers" ripptool, Raili Keivi betoonist ja portselanist nõudekollektsioon, Tarmo Luisu valgusti "Kassett", Stella Soomlaisi käekotid, Karin Kallase ja Erik Pasti (Stuudio Nahk) disainitud jalatsid, käekotid ja ehted, Kuula + Jylhä jalatsikollektsioon, Mokoko (disainer Mari Maripuu) nahast aksessuaarid

Design and development of a four-cell sorption compressor based J-T cooler using R134a as working fluid

Energy Technology Data Exchange (ETDEWEB)

Mehta, R. N. [Mechanical Engineering Department, Indian Institute of Technology Bombay, Mumbai - 400076, India and Government Engineering College Bharuch, Gujarat - 392002 (India); Bapat, S. L.; Atrey, M. D. [Mechanical Engineering Department, Indian Institute of Technology Bombay, Mumbai - 400076 (India)

2014-01-29

The need of a cooler with no electromagnetic interference and practically zero vibration has led to sorption compressor based Joule-Thomson (J-T) coolers. These are useful for sophisticated electronic, ground based and space borne systems. In a Sorption compressor, adsorbed gases are desorbed into a confined volume by raising temperature of the sorption bed resulting in an increase in pressure of the liberated gas. In order to have the system (compressor) functioning on a continuous basis, with almost a constant gas flow rate, multiple cells are used with the adaptation of Temperature Swing Adsorption (TSA) process. As the mass of the desorbed gas dictates the compressor throughput, a combination of sorbent material with high adsorption capacity for a chosen gas or gas mixture has to be selected for efficient operation of the compressor. Commercially available (coconut-shell base) activated carbon has been selected for the present application. The characterization study for variation of discharge pressure is used to design the Four-cell sorption compressor based cryocooler with a desired output. Apart from compressor, the system includes a) After cooler b) Return gas heat exchanger c) capillary tube as the J-T expansion device and d) Evaporator.

Urbanistid ja keskkonnaeksperdid: iga muudatuse eest Reidi tee projektis oleme pidanud võitlema / Helen Sooväli-Sepping, Kristi Grišakov, Mari Jüssi ; intervjueerinud Mari Peegel ; kommenteerinud Taavi Aas

Index Scriptorium Estoniae

Sooväli-Sepping, Helen, 1974-

2016-01-01

TLÜ keskkonnakorralduse professor ja linnakorralduse õppekava juht Helen Sooväli-Sepping, TTÜ maastikuarhitektuuri õppekava juht ja linnaplaneerija-urbanist Kristi Grišakov ning Stockholmi keskkonnainstituudi Tallinna keskuse liikuvus- ja keskkonnaekspert Mari Jüssi kinnitavad, et Reidi tee projekt ei ole endiselt inimsõbralik

Fast neutron-gamma discrimination on neutron emission profile measurement on JT-60U

International Nuclear Information System (INIS)

Ishii, K.; Okamoto, A.; Kitajima, S.; Sasao, M.; Shinohara, K.; Ishikawa, M.; Baba, M.; Isobe, M.

2010-01-01

A digital signal processing (DSP) system is applied to stilbene scintillation detectors of the multichannel neutron emission profile monitor in JT-60U. Automatic analysis of the neutron-γ pulse shape discrimination is a key issue to diminish the processing time in the DSP system, and it has been applied using the two-dimensional (2D) map. Linear discriminant function is used to determine the dividing line between neutron events and γ-ray events on a 2D map. In order to verify the validity of the dividing line determination, the pulse shape discrimination quality is evaluated. As a result, the γ-ray contamination in most of the beam heating phase was negligible compared with the statistical error with 10 ms time resolution.

Mary Shelley's Frankenstein: exploring neuroscience, nature, and nurture in the novel and the films.

Science.gov (United States)

Ginn, Sheryl R

2013-01-01

The story of Victor Frankenstein's quest to conquer death produced a legacy that has endured for almost 200 years. Powerful in its condemnation of the scientist's quest to achieve knowledge at any cost, Mary Shelley's Frankenstein is one of the most enduring novels of all time. It has never been out of print and has been translated to both stage and screen many times since its "birth." Numerous novels, short stories, and scripts have drawn upon Shelley's primary theme: the creation of a living organism from the dead, dying, and decaying body parts of human beings. Although Mary does not provide details of the animation process, particularly in her first edition, the process has been explored with a great deal of imagination and originality in the various cinematic portrayals of the story. Equally important as the theme of the scientist's quest for knowledge is the role that a creator plays in the life of its creation. Mary Shelley's novel pondered on how rejection would affect the offspring of such "unnatural" origins. In keeping with the "scientific" basis of the Creature's birth, cinematic portrayals attempted to provide a scientific rationale for the Creature's descent into madness and its evil behavior. From Robert Florey's initial script for the 1931 film directed by James Whale to the more recent films and television series, an abnormal brain is considered to be the cause of the madness and malignity of the Creature. © 2013 Elsevier B.V. All rights reserved.

Golden Girl: Mary Lai Reflects as She Marks Her 50th Anniversary.

Science.gov (United States)

Iwanowski, Jay

1996-01-01

The career and administrative style of Mary M. Lai, who celebrates her 50th year as chief financial officer at Long Island University (New York), are discussed. Her perspectives on change in higher education and in the institution during that time, the administrator's role, current challenges for financial officers, and the college environment as…

Welcoming the Sunlight: A Conversation with Mary Kay Zabel and Robert Zabel

Science.gov (United States)

Teagarden, James; Kaff, Marilyn

2018-01-01

Professors Emeriti Mary Kay and Robert Zabel share their reflections on their long and productive careers working with students and teachers. Their respective careers share much of the same history and complement each other. The Zabels share their advice with those entering the field and the challenges they see for the education of students with…

Engineering study of the neutral beam and rf heating systems for DIII-D, MFTF-B, JET, JT-60 and TFTR

International Nuclear Information System (INIS)

Lindquist, W.B.; Staten, S.H.

1987-01-01

An engineering study was performed on the rf and neutral beam heating systems implemented for DIII-D, MFTF-B, JET, JT-60 and TFTR. Areas covered include: methodology used to implement the systems, technology, cost, schedule, performance, problems encountered and lessons learned. Systems are compared and contrasted in the areas studied. Summary statements were made on common problems and lessons learned. 3 refs., 6 tabs

Mariátegui y la constitución de un socialismo latinoamericano

Directory of Open Access Journals (Sweden)

César Ruiz Sanjuán

2015-01-01

Full Text Available En el presente artículo se analizan los aspectos fundamentales de la concepción socialista de Mariátegui, poniendo de manifiesto sus planteamientos historicistas y voluntaristas frente al economicismo y al determinismo dominantes en la tradición marxista, así como su reformulación del materialismo histórico como método de interpretación no sólo de las sociedades capitalistas desarrolladas, sino también de las sociedades coloniales en las que el capitalismo se encuentra combinado con elementos supervivientes de formaciones sociales anteriores. Se aborda asimismo la comprensión de Mariátegui del partido político como forma de articulación de las relaciones de fuerza de las clases subalternas, que debe emerger del proceso de formación de una voluntad colectiva entre las mismas. Finalmente se examina el modo en que integra en su concepción socialista la cuestión de indigenismo para plantear una forma de transición hacia un socialismo específicamente latinoamericano.

THE DEAD-LIVING-MOTHER: MARIE BONAPARTE'S INTERPRETATION OF EDGAR ALLAN POE'S SHORT STORIES.

Science.gov (United States)

Obaid, Francisco Pizarro

2016-06-01

Princess Marie Bonaparte is an important figure in the history of psychoanalysis, remembered for her crucial role in arranging Freud's escape to safety in London from Nazi Vienna, in 1938. This paper connects us to Bonaparte's work on Poe's short stories. Founded on concepts of Freudian theory and an exhaustive review of the biographical facts, Marie Bonaparte concluded that the works of Edgar Allan Poe drew their most powerful inspirational force from the psychological consequences of the early death of the poet's mother. In Bonaparte's approach, which was powerfully influenced by her recognition of the impact of the death of her own mother when she was born-an understanding she gained in her analysis with Freud-the thesis of the dead-living-mother achieved the status of a paradigmatic key to analyze and understand Poe's literary legacy. This paper explores the background and support of this hypothesis and reviews Bonaparte's interpretation of Poe's most notable short stories, in which extraordinary female figures feature in the narrative.

Manufacturing and Design Engineering Students St. Mary's Hospital, Phoenix Park.

OpenAIRE

Mitchell, Leah

2012-01-01

Poster with details of project to improve ease of movement for Kirton Stirling chairs in St. Mary's Hospital, Phoenix Park, Dublin. Third year students in the B Eng (Honours) Manufacturing and Design Engineering course at Bolton St. completed a project in conjunction with St. Mary‟s Hospital, Phoenix Park. The staff in St Mary‟s were experiencing difficulty in moving the Kirton Stirling chairs (pictured above). These chairs are used to transport elderly patients from one location to another. ...