WorldWideScience

Sample records for manufacturing vision development

  1. Features of the Manufacturing Vision Development Process

    DEFF Research Database (Denmark)

    Dukovska-Popovska, Iskra; Riis, Jens Ove; Boer, Harry

    2005-01-01

    of action research. The methodology recommends wide participation of people from different hierarchical and functional positions, who engage in a relatively short, playful and creative process and come up with a vision (concept) for the future manufacturing system in the company. Based on three case studies......This paper discusses the key features of the process of Manufacturing Vision Development, a process that enables companies to develop their future manufacturing concept. The basis for the process is a generic five-phase methodology (Riis and Johansen, 2003) developed as a result of ten years...... of companies going through the initial phases of the methodology, this research identified the key features of the Manufacturing Vision Development process. The paper elaborates the key features by defining them, discussing how and when they can appear, and how they influence the process....

  2. Manufacturing Vision Development – Process and Dialogue

    DEFF Research Database (Denmark)

    Dukovska-Popovska, Iskra

    This Ph.D. project has been conducted in the context of PRODUCTION+5 methodology for devel¬oping manufacturing visions for companies, and related to Experimental Laboratory for Production. Both have been established in the Center for Industrial Production. The empirical parts of the research invo...... involve case studies of three companies that are part of the MCD-process. The cases primarily are focusing on the process and the dialogue dur¬ing the manufacturing vision development.......This Ph.D. project has been conducted in the context of PRODUCTION+5 methodology for devel¬oping manufacturing visions for companies, and related to Experimental Laboratory for Production. Both have been established in the Center for Industrial Production. The empirical parts of the research...

  3. Key Features of the Manufacturing Vision Development Process

    DEFF Research Database (Denmark)

    Dukovska-Popovska, Iskra; Riis, Jens Ove; Boer, Harry

    2005-01-01

    of action research. The methodology recommends wide participation of people from different hierarchical and functional positions, who engage in a relatively short, playful and creative process and come up with a vision (concept) for the future manufacturing system in the company. Based on three case studies......This paper discusses the key features of the process of Manufacturing Vision Development, a process that enables companies to develop their future manufacturing concept. The basis for the process is a generic five-phase methodology (Riis and Johansen 2003) developed as a result of ten years...... of companies going through the initial phases of the methodology, this research identified the key features of the Manufacturing Vision Development process. The paper elaborates the key features by defining them, discussing how and when they can appear, and how they influence the process....

  4. An Indexing Scheme for Case-Based Manufacturing Vision Development

    DEFF Research Database (Denmark)

    Wang, Chengbo; Johansen, John; Luxhøj, James T.

    2004-01-01

    with the competence improvement of an enterprises manufacturing system. There are two types of cases within the CBRM – an event case (EC) and a general supportive case (GSC). We designed one set of indexing vocabulary for the two types of cases, but a different indexing representation structure for each of them......This paper focuses on one critical element, indexing – retaining and representing knowledge in an applied case-based reasoning (CBR) model for supporting strategic manufacturing vision development (CBRM). Manufacturing vision (MV) is a kind of knowledge management concept and process concerned...

  5. Applying a manufacturing vision development prototype in practice

    DEFF Research Database (Denmark)

    Wang, Chengbo; Luxhøj, James T.; Johansen, John

    2005-01-01

    The primary objective of this paper is to summarise the empirical application of a designed case-based manufacturing vision (MV) development prototype (CBRM). This empirical application is undertaken using case study strategy, due to its ability to answer the research questions regarding...... enterprise. The three real world cases (companies) were selected in the USA within different industrial segments. The application results suggest that the CBRM is supportive of the decision-making process for tackling strategic manufacturing issues....

  6. 3D Machine Vision and Additive Manufacturing: Concurrent Product and Process Development

    International Nuclear Information System (INIS)

    Ilyas, Ismet P

    2013-01-01

    The manufacturing environment rapidly changes in turbulence fashion. Digital manufacturing (DM) plays a significant role and one of the key strategies in setting up vision and strategic planning toward the knowledge based manufacturing. An approach of combining 3D machine vision (3D-MV) and an Additive Manufacturing (AM) may finally be finding its niche in manufacturing. This paper briefly overviews the integration of the 3D machine vision and AM in concurrent product and process development, the challenges and opportunities, the implementation of the 3D-MV and AM at POLMAN Bandung in accelerating product design and process development, and discusses a direct deployment of this approach on a real case from our industrial partners that have placed this as one of the very important and strategic approach in research as well as product/prototype development. The strategic aspects and needs of this combination approach in research, design and development are main concerns of the presentation.

  7. Applying a Knowledge Management Modeling Tool for Manufacturing Vision (MV) Development

    DEFF Research Database (Denmark)

    Wang, Chengbo; Luxhøj, James T.; Johansen, John

    2004-01-01

    This paper introduces an empirical application of an experimental model for knowledge management within an organization, namely a case-based reasoning model for manufacturing vision development (CBRM). The model integrates the development process of manufacturing vision with the methodology of case......-based reasoning. This paper briefly describes the model's theoretical fundamentals and its conceptual structure; conducts a detailed introduction of the critical elements within the model; exhibits a real world application of the model; and summarizes the review of the model through academia and practice. Finds...... that the CBRM is supportive to the decision-making process of applying and augmenting organizational knowledge. It provides a new angle to tackle strategic management issues within the manufacturing system of a business operation. Explores a new proposition within strategic manufacturing management by enriching...

  8. Development of 3D online contact measurement system for intelligent manufacturing based on stereo vision

    Science.gov (United States)

    Li, Peng; Chong, Wenyan; Ma, Yongjun

    2017-10-01

    In order to avoid shortcomings of low efficiency and restricted measuring range exsited in traditional 3D on-line contact measurement method for workpiece size, the development of a novel 3D contact measurement system is introduced, which is designed for intelligent manufacturing based on stereo vision. The developed contact measurement system is characterized with an intergarted use of a handy probe, a binocular stereo vision system, and advanced measurement software.The handy probe consists of six track markers, a touch probe and the associated elcetronics. In the process of contact measurement, the hand probe can be located by the use of the stereo vision system and track markers, and 3D coordinates of a space point on the workpiece can be mearsured by calculating the tip position of a touch probe. With the flexibility of the hand probe, the orientation, range, density of the 3D contact measurenent can be adptable to different needs. Applications of the developed contact measurement system to high-precision measurement and rapid surface digitization are experimentally demonstrated.

  9. VISION development

    International Nuclear Information System (INIS)

    Hernandez, J.E.; Sherwood, R.J.; Whitman, S.R.

    1994-01-01

    VISION is a flexible and extensible object-oriented programming environment for prototyping computer-vision and pattern-recognition algorithms. This year's effort focused on three major areas: documentation, graphics, and support for new applications

  10. Development of a Computer Vision Technology for the Forest Products Manufacturing Industry

    Science.gov (United States)

    D. Earl Kline; Richard Conners; Philip A. Araman

    1992-01-01

    The goal of this research is to create an automated processing/grading system for hardwood lumber that will be of use to the forest products industry. The objective of creating a full scale machine vision prototype for inspecting hardwood lumber will become a reality in calendar year 1992. Space for the full scale prototype has been created at the Brooks Forest...

  11. Development of Moire machine vision

    Science.gov (United States)

    Harding, Kevin G.

    1987-10-01

    Three dimensional perception is essential to the development of versatile robotics systems in order to handle complex manufacturing tasks in future factories and in providing high accuracy measurements needed in flexible manufacturing and quality control. A program is described which will develop the potential of Moire techniques to provide this capability in vision systems and automated measurements, and demonstrate artificial intelligence (AI) techniques to take advantage of the strengths of Moire sensing. Moire techniques provide a means of optically manipulating the complex visual data in a three dimensional scene into a form which can be easily and quickly analyzed by computers. This type of optical data manipulation provides high productivity through integrated automation, producing a high quality product while reducing computer and mechanical manipulation requirements and thereby the cost and time of production. This nondestructive evaluation is developed to be able to make full field range measurement and three dimensional scene analysis.

  12. Developments in fuel manufacturing

    International Nuclear Information System (INIS)

    Williams, T.

    1997-01-01

    BNFL has a long tradition of willingness to embrace technological challenge and a dedication to quality. This paper describes advances in the overall manufacturing philosophy at BNFL's Fuel Business Group and then covers how some new technologies are currently being employed in BNFL Fuel Business Group's flagship oxide complex (OFC), which is currently in its final stages of commissioning. This plant represents a total investment of some Pound 200 million. This paper also describes how these technologies are also being deployed in BNFL's MOX plant now being built at Sellafield and, finally, covers some new processes being developed for advanced fuel manufacture. (author)

  13. New development in robot vision

    CERN Document Server

    Behal, Aman; Chung, Chi-Kit

    2015-01-01

    The field of robotic vision has advanced dramatically recently with the development of new range sensors.  Tremendous progress has been made resulting in significant impact on areas such as robotic navigation, scene/environment understanding, and visual learning. This edited book provides a solid and diversified reference source for some of the most recent important advancements in the field of robotic vision. The book starts with articles that describe new techniques to understand scenes from 2D/3D data such as estimation of planar structures, recognition of multiple objects in the scene using different kinds of features as well as their spatial and semantic relationships, generation of 3D object models, approach to recognize partially occluded objects, etc. Novel techniques are introduced to improve 3D perception accuracy with other sensors such as a gyroscope, positioning accuracy with a visual servoing based alignment strategy for microassembly, and increasing object recognition reliability using related...

  14. Developments in fuel manufacturing

    International Nuclear Information System (INIS)

    Ion, S.E.; Harrop, G.; Maricalva Gonzalez, J.

    1995-01-01

    The status of the investment and R and D programmes in the UK and Spanish fuel fabrication facilities is outlined. Due to a number of circumstances, BNFL and ENUSA have been in the forefront of capital investment, with associated commitment to engineering and scientific research and development. Carrying through this investment has allowed the embodiment of proven state of the art technologies in the design of fuel fabrication plants, with particular emphasis on meeting the future challenge of health and safety, and product quality, at an acceptable cost. ENUSA and BNFL currently supply fuel, not only to their respective 'home' markets but also to France, Belgium, Sweden, and Germany. Both organisations employ an International Business outlook and partake in focused and speculative R and D projects for the design and manufacture of nuclear fuel. (orig./HP)

  15. Development and evaluation of vision rehabilitation devices.

    Science.gov (United States)

    Luo, Gang; Peli, Eli

    2011-01-01

    We have developed a range of vision rehabilitation devices and techniques for people with impaired vision due to either central vision loss or severely restricted peripheral visual field. We have conducted evaluation studies with patients to test the utilities of these techniques in an effort to document their advantages as well as their limitations. Here we describe our work on a visual field expander based on a head mounted display (HMD) for tunnel vision, a vision enhancement device for central vision loss, and a frequency domain JPEG/MPEG based image enhancement technique. All the evaluation studies included visual search paradigms that are suitable for conducting indoor controllable experiments.

  16. Drug development and manufacturing

    Science.gov (United States)

    Warner, Benjamin P.; McCleskey, T. Mark; Burrell, Anthony K.

    2015-10-13

    X-ray fluorescence (XRF) spectrometry has been used for detecting binding events and measuring binding selectivities between chemicals and receptors. XRF may also be used for estimating the therapeutic index of a chemical, for estimating the binding selectivity of a chemical versus chemical analogs, for measuring post-translational modifications of proteins, and for drug manufacturing.

  17. Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision

    International Nuclear Information System (INIS)

    Xiong, Jun; Zhang, Guangjun

    2013-01-01

    Additive manufacturing based on gas metal arc welding is an advanced technique for depositing fully dense components with low cost. Despite this fact, techniques to achieve accurate control and automation of the process have not yet been perfectly developed. The online measurement of the deposited bead geometry is a key problem for reliable control. In this work a passive vision-sensing system, comprising two cameras and composite filtering techniques, was proposed for real-time detection of the bead height and width through deposition of thin walls. The nozzle to the top surface distance was monitored for eliminating accumulated height errors during the multi-layer deposition process. Various image processing algorithms were applied and discussed for extracting feature parameters. A calibration procedure was presented for the monitoring system. Validation experiments confirmed the effectiveness of the online measurement system for bead geometry in layered additive manufacturing. (paper)

  18. Manufacturing Visions of Society and History in Textbooks.

    Science.gov (United States)

    Perlmutter, David D.

    1997-01-01

    Finds that the secondary-school textbook vision of society is homogenized and sanitized to reduce the risk of controversy. Reveals three domains of control that influence textbook visual content: industrial (how the image world of a textbook is created); commercial (marketing pressures); and social (interest groups that influence the visual…

  19. Future manufacturing-towards a South African vision

    CSIR Research Space (South Africa)

    Mass Media

    2007-10-01

    Full Text Available Earlier this month a future manufacturing workshop presented by Dr Anthon Botha and Joe Manchu of Innovation Lab Pty Ltd and Lorraine Ngwenya of the Department of Science and Technology - was held at the Innovation Hub in Pretoria. Key roleplayers...

  20. Industrial waste management within manufacturing: a comparative study of tools, policies, visions and concepts

    OpenAIRE

    Shahbazi, Sasha; Kurdve, Martin; Bjelkemyr, Marcus; Jönsson, Christina; Wiktorsson, Magnus

    2013-01-01

    Industrial waste is a key factor when assessing the sustainability of a manufacturing process or company. A multitude of visions, concepts, tools, and policies are used both academically and industrially to improve the environmental effect of manufacturing; a majority of these approaches have a direct bearing on industrial waste. The identified approaches have in this paper been categorised according to application area, goals, organisational entity, life cycle phase, and waste hierarchy stag...

  1. Visions of Vision: An Exploratory Study of the Role College and University Presidents Play in Developing Institutional Vision

    Science.gov (United States)

    McWade, Jessica C.

    2014-01-01

    This qualitative research explores how college and university presidents engage in the process of developing formal institutional vision. The inquiry identifies roles presidents play in vision development, which is often undertaken as part of strategic-planning initiatives. Two constructs of leadership and institutional vision are used to examine…

  2. System of error detection in the manufacture of garments using artificial vision

    Science.gov (United States)

    Moreno, J. J.; Aguila, A.; Partida, E.; Martinez, C. L.; Morales, O.; Tejeida, R.

    2017-12-01

    A computer vision system is implemented to detect errors in the cutting stage within the manufacturing process of garments in the textile industry. It provides solution to errors within the process that cannot be easily detected by any employee, in addition to significantly increase the speed of quality review. In the textile industry as in many others, quality control is required in manufactured products and this has been carried out manually by means of visual inspection by employees over the years. For this reason, the objective of this project is to design a quality control system using computer vision to identify errors in the cutting stage within the garment manufacturing process to increase the productivity of textile processes by reducing costs.

  3. Development of machine vision system for PHWR fuel pellet inspection

    Energy Technology Data Exchange (ETDEWEB)

    Kamalesh Kumar, B.; Reddy, K.S.; Lakshminarayana, A.; Sastry, V.S.; Ramana Rao, A.V. [Nuclear Fuel Complex, Hyderabad, Andhra Pradesh (India); Joshi, M.; Deshpande, P.; Navathe, C.P.; Jayaraj, R.N. [Raja Ramanna Centre for Advanced Technology, Indore, Madhya Pradesh (India)

    2008-07-01

    Nuclear Fuel Complex, a constituent of Department of Atomic Energy; India is responsible for manufacturing nuclear fuel in India . Over a million Uranium-di-oxide pellets fabricated per annum need visual inspection . In order to overcome the limitations of human based visual inspection, NFC has undertaken the development of machine vision system. The development involved designing various subsystems viz. mechanical and control subsystem for handling and rotation of fuel pellets, lighting subsystem for illumination, image acquisition system, and image processing system and integration. This paper brings out details of various subsystems and results obtained from the trials conducted. (author)

  4. Development of Integration in Manufacturing

    DEFF Research Database (Denmark)

    Sørensen, Torben; Trostmann, Erik

    1996-01-01

    significance to all manufacturing industries.International standardization based on the product model definition standard STEP (ISO10303) is playing a key role in promoting a modern approach to Product Data Technology. The initial release of STEP, consisting of twelve essential parts, has recently been...... must be extended to cope with descriptions of functional behavior of products.In the robotics area, Computer Aided Robotics (CAR) systems for design, off-line programming, and simulation are currently increasing their model features with new topics, such as multi-body dynamics, realistic motion......Current international developments in the broad field of Product Data Technology are advancing rapidly and are leading up to new levels of technology in product model definition, product model communications, enterprise integration and cooperation. These developments will be of strategic...

  5. Ethical, environmental and social issues for machine vision in manufacturing industry

    Science.gov (United States)

    Batchelor, Bruce G.; Whelan, Paul F.

    1995-10-01

    Some of the ethical, environmental and social issues relating to the design and use of machine vision systems in manufacturing industry are highlighted. The authors' aim is to emphasize some of the more important issues, and raise general awareness of the need to consider the potential advantages and hazards of machine vision technology. However, in a short article like this, it is impossible to cover the subject comprehensively. This paper should therefore be seen as a discussion document, which it is hoped will provoke more detailed consideration of these very important issues. It follows from an article presented at last year's workshop. Five major topics are discussed: (1) The impact of machine vision systems on the environment; (2) The implications of machine vision for product and factory safety, the health and well-being of employees; (3) The importance of intellectual integrity in a field requiring a careful balance of advanced ideas and technologies; (4) Commercial and managerial integrity; and (5) The impact of machine visions technology on employment prospects, particularly for people with low skill levels.

  6. Vision-related problems among the workers engaged in jewellery manufacturing.

    Science.gov (United States)

    Salve, Urmi Ravindra

    2015-01-01

    American Optometric Association defines Computer Vision Syndrome (CVS) as "complex of eye and vision problems related to near work which are experienced during or related to computer use." This happens when visual demand of the tasks exceeds the visual ability of the users. Even though problems were initially attributed to computer-related activities subsequently similar problems are also reported while carrying any near point task. Jewellery manufacturing activities involves precision designs, setting the tiny metals and stones which requires high visual attention and mental concentration and are often near point task. It is therefore expected that the workers engaged in jewellery manufacturing may also experience symptoms like CVS. Keeping the above in mind, this study was taken up (1) To identify the prevalence of symptoms like CVS among the workers of the jewellery manufacturing and compare the same with the workers working at computer workstation and (2) To ascertain whether such symptoms have any permanent vision-related problems. Case control study. The study was carried out in Zaveri Bazaar region and at an IT-enabled organization in Mumbai. The study involved the identification of symptoms of CVS using a questionnaire of Eye Strain Journal, opthalmological check-ups and measurement of Spontaneous Eye Blink rate. The data obtained from the jewellery manufacturing was compared with the data of the subjects engaged in computer work and with the data available in the literature. A comparative inferential statistics was used. Results showed that visual demands of the task carried out in jewellery manufacturing were much higher than that of carried out in computer-related work.

  7. A vision on methodology for integrated sustainable urban development: bequest

    NARCIS (Netherlands)

    Bentivegna, V.; Curwell, S.; Deakin, M.; Lombardi, P.; Mitchell, G.; Nijkamp, P.

    2002-01-01

    The concepts and visions of sustainable development that have emerged in the post-Brundtland era are explored in terms laying the foundations for a common vision of sustainable urban development (SUD). The described vision and methodology for SUD resulted from the activities of an international

  8. State of Vision Development in Slovenian Companies

    Directory of Open Access Journals (Sweden)

    Vojko Toman

    2014-05-01

    Full Text Available Vision is a prerequisite for efficient strategic planning and the effectiveness of a company. If a company has no vision (i.e., it does not know where it is heading, then it cannot build on advantages, eliminate weaknesses, exploit opportunities and avoid threats. The term ‘vision’ is often used in scientific and professional literature, but it should be noted that different authors understand the term differently and often discuss it inadequately. Many questions regarding the nature of vision arise in practice and in theory, and I answer many of them in my article. I define vision, explain the reasons for its necessity and provide its characteristics and content. I define mission and explain the main difference between vision and mission. The majority of the article presents the results of empirical research on the state of vision setting in Slovenian companies. The article highlights the way in which these terms are understood by top managers.

  9. The Development of Peripheral Vision in Infants.

    Science.gov (United States)

    Guez, Jean R.

    This study investigated the extent of infant peripheral vision, specifically the extent of infants' constricted field, or tunnel vision. Thirteen infants, 2 to 5 months old, were tested using a psychophysical procedure to obtain contrast sensitivity thresholds at four retinal loci (-40, -15, +15, +40 deg.). Infants were placed in an infant bed in…

  10. An artificial vision solution for reusing discarded parts resulted after a manufacturing process

    Science.gov (United States)

    Cohal, V.; Cohal, A.

    2016-08-01

    The profit of a factory can be improved by reusing the discarded components produced. This paper is based on the case of a manufacturing process where rectangular metallic sheets of different sizes are produced. Using an artificial vision system, the shapes and the sizes of the produced parts can be determined. Those sheets which do not respect the requirements imposed are labeled as discarded. Instead of throwing these parts, a decision algorithm can analyze if another metallic sheet with smaller dimensions can be obtained from these. Two methods of decision are presented in this paper, considering the restriction that the sides of the new sheet has to be parallel with the axis of the coordinate system. The coordinates of each new part obtained from a discarded sheet are computed in order to be delivered to a milling machine. Details about implementing these algorithms (image processing and decision respectively) in the MATLAB environment using Image Processing Toolbox are given.

  11. In-Space Manufacturing Baseline Property Development

    Science.gov (United States)

    Stockman, Tom; Schneider, Judith; Prater, Tracie; Bean, Quincy; Werkheiser, Nicki

    2016-01-01

    The In-Space Manufacturing (ISM) project at NASA Marshall Space Flight Center currently operates a 3D FDM (fused deposition modeling) printer onboard the International Space Station. In order to enable utilization of this capability by designer, the project needs to establish characteristic material properties for materials produced using the process. This is difficult for additive manufacturing since standards and specifications do not yet exist for these technologies. Due to availability of crew time, there are limitations to the sample size which in turn limits the application of the traditional design allowables approaches to develop a materials property database for designers. In this study, various approaches to development of material databases were evaluated for use by designers of space systems who wish to leverage in-space manufacturing capabilities. This study focuses on alternative statistical techniques for baseline property development to support in-space manufacturing.

  12. Development of Advanced Ceramic Manufacturing Technology; FINAL

    International Nuclear Information System (INIS)

    Pujari, V.K.

    2001-01-01

    Advanced structural ceramics are enabling materials for new transportation engine systems that have the potential for significantly reducing energy consumption and pollution in automobiles and heavy vehicles. Ceramic component reliability and performance have been demonstrated in previous U.S. DOE initiatives, but high manufacturing cost was recognized as a major barrier to commercialization. Norton Advanced Ceramics (NAC), a division of Saint-Gobain Industrial Ceramics, Inc. (SGIC), was selected to perform a major Advanced Ceramics Manufacturing Technology (ACMT) Program. The overall objectives of NAC's program were to design, develop, and demonstrate advanced manufacturing technology for the production of ceramic exhaust valves for diesel engines. The specific objectives were (1) to reduce the manufacturing cost by an order of magnitude, (2) to develop and demonstrate process capability and reproducibility, and (3) to validate ceramic valve performance, durability, and reliability. I n order to achieve these objectives, NAC, a leading U.S. advanced ceramics component manufacturer, assembled a multidisciplinary, vertically integrated team. This team included: a major diesel engine builder, Detroit Diesel Corporation (DDC); a corporate ceramics research division, SGIC's Northboro R and D Center; intelligent processing system developers, BDM Federal/MATSYS; a furnace equipment company, Centorr/Vacuum Industries; a sintering expert, Wittmer Consultants; a production OEM, Deco-Grand; a wheel manufacturer and grinding operation developer, Norton Company's Higgins Grinding Technology Center (HGTC); a ceramic machine shop, Chand Kare Technical Ceramics; and a manufacturing cost consultant, IBIS Associates. The program was divided into four major tasks: Component Design and Specification, Component Manufacturing Technology Development, Inspection and Testing, and Process Demonstration

  13. Recent Developments in Abrasive Hybrid Manufacturing Processes

    Directory of Open Access Journals (Sweden)

    Ruszaj Adam

    2017-06-01

    Full Text Available Recent dynamic development of abrasive hybrid manufacturing processes results from application of a new difficult for machining materials and improvement of technological indicators of manufacturing processes already applied in practice. This tendency also occurs in abrasive machining processes which are often supported by ultrasonic vibrations, electrochemical dissolution or by electrical discharges. In the paper we present the review of new results of investigations and new practical applications of Abrasive Electrodischarge (AEDM and Electrochemical (AECM Machining.

  14. Participation and dialogue in strategic manufacturing development

    DEFF Research Database (Denmark)

    Riis, Jens Ove; Dukovska-Popovska, Iskra; Johansen, John

    2006-01-01

    Increased competition and the dynamics of technological and market developments have made operations in industrial enterprises very complex, with many stakeholders in and around the enterprise. At the same time, it has become important to address strategic issues of manufacturing. To plan...... dialogues during a workshop, part of which is a dialogue-monitoring instrument. Empirical studies will draw out process elements of participation and dialogue and demonstrate the applicability of the model. Finally, implications are spelled out for planning and managing workshops in different phases...... and manage an appropriate degree of participation in strategy development has become a key issue, especially to ensure ideas and ownership from those who will be involved in the implementation of a manufacturing strategy. We have developed and implemented a five-phased process for developing a manufacturing...

  15. Development of zirconium alloy tube manufacturing technology

    International Nuclear Information System (INIS)

    Kim, In Kyu; Park, Chan Hyun; Lee, Seung Hwan; Chung, Sun Kyo

    2009-01-01

    In late 2004, Korea Nuclear Fuel Company (KNF) launched a government funded joint development program with Westinghouse Electric Co. (WEC) to establish zirconium alloy tube manufacturing technology in Korea. Through this program, KNF and WEC have developed a state of the art facility to manufacture high quality nuclear tubes. KNF performed equipment qualification tests for each manufacturing machine with the support of WEC, and independently carried out product qualification tests for each tube product to be commercially produced. Apart from those tests, characterization test program consisting of specification test and characterization test was developed by KNF and WEC to demonstrate to customers of KNF the quality equivalency of products manufactured by KNF and WEC plants respectively. As part of establishment of performance evaluation technology for zirconium alloy tube in Korea, KNF carried out analyses of materials produced for the characterization test program using the most advanced techniques. Thanks to the accomplishment of the development of zirconium alloy tube manufacturing technology, KNF is expected to acquire positive spin off benefits in terms of technology and economy in the near future

  16. Development of steam generator manufacturing technology

    International Nuclear Information System (INIS)

    Grant, J.A.

    1979-01-01

    In 1968 Babcock and Wilcox (Operations) Ltd., received an order from the CEGB to design, manufacture, install and commission 16 Steam Generators for 2 x 660 Mw (e) Advanced Gas Cooled Reactor Power Station at Hartlepool. This order was followed in 1970 by a similar order for the Heysham Power Station. The design and manufacture of the Steam Generators represented a major advance in technology and the paper discusses the methods by which a manufacturing facility was developed, by the Production Division of Babcock, to produce components to a quality, complexity and accuracy unique in the U.K. commercial boilermaking industry. The discussion includes a brief design background, a description of the Steam Generators and a view of the Production Division background. This is followed by a description of the organisation of the technological development and a consideration of the results. (author)

  17. Automated Vision Test Development and Validation

    Science.gov (United States)

    2016-11-01

    crystal display monitor (NEC Multisync, P232W) at 1920x1080 resolution. Proper calibration was confirmed using a spot photometer/colorimeter (X-Rite i1...visual input to the right and left eye was achieved using liquid crystal display shuttered glasses (NVIDIA 3D Vision 2). The stereo target (Figure 4...threshold on the automated tasks. • Subjects had a lower (better) threshold on color testing for all cone types using the OCCT due to a ceiling

  18. Competitive Manufacturing: New Strategies for Regional Development.

    Science.gov (United States)

    Rosenfeld, Stuart A.

    In the past, economic development in the rural United States, particularly in the rural South, relied principally on the attractiveness of a low-wage work force to mass-production manufacturing industries. Now however, the viability of the traditional mass-production economy's organizational structure and operating procedures has been eroded by…

  19. FLORA™: Phase I development of a functional vision assessment for prosthetic vision users.

    Science.gov (United States)

    Geruschat, Duane R; Flax, Marshall; Tanna, Nilima; Bianchi, Michelle; Fisher, Andy; Goldschmidt, Mira; Fisher, Lynne; Dagnelie, Gislin; Deremeik, Jim; Smith, Audrey; Anaflous, Fatima; Dorn, Jessy

    2015-07-01

    Research groups and funding agencies need a functional assessment suitable for an ultra-low vision population to evaluate the impact of new vision-restoration treatments. The purpose of this study was to develop a pilot assessment to capture the functional visual ability and well-being of subjects whose vision has been partially restored with the Argus II Retinal Prosthesis System. The Functional Low-Vision Observer Rated Assessment (FLORA) pilot assessment involved a self-report section, a list of functional visual tasks for observation of performance and a case narrative summary. Results were analysed to determine whether the interview questions and functional visual tasks were appropriate for this ultra-low vision population and whether the ratings suffered from floor or ceiling effects. Thirty subjects with severe to profound retinitis pigmentosa (bare light perception or worse in both eyes) were enrolled in a clinical trial and implanted with the Argus II System. From this population, 26 subjects were assessed with the FLORA. Seven different evaluators administered the assessment. All 14 interview questions were asked. All 35 tasks for functional vision were selected for evaluation at least once, with an average of 20 subjects being evaluated for each test item. All four rating options—impossible (33 per cent), difficult (23 per cent), moderate (24 per cent) and easy (19 per cent)—were used by the evaluators. Evaluators also judged the amount of vision they observed the subjects using to complete the various tasks, with 'vision only' occurring 75 per cent on average with the System ON, and 29 per cent with the System OFF. The first version of the FLORA was found to contain useful elements for evaluation and to avoid floor and ceiling effects. The next phase of development will be to refine the assessment and to establish reliability and validity to increase its value as an assessment tool for functional vision and well-being. © 2015 The Authors. Clinical

  20. Vision-based coaching: optimizing resources for leader development

    Science.gov (United States)

    Passarelli, Angela M.

    2015-01-01

    Leaders develop in the direction of their dreams, not in the direction of their deficits. Yet many coaching interactions intended to promote a leader’s development fail to leverage the benefits of the individual’s personal vision. Drawing on intentional change theory, this article postulates that coaching interactions that emphasize a leader’s personal vision (future aspirations and core identity) evoke a psychophysiological state characterized by positive emotions, cognitive openness, and optimal neurobiological functioning for complex goal pursuit. Vision-based coaching, via this psychophysiological state, generates a host of relational and motivational resources critical to the developmental process. These resources include: formation of a positive coaching relationship, expansion of the leader’s identity, increased vitality, activation of learning goals, and a promotion–orientation. Organizational outcomes as well as limitations to vision-based coaching are discussed. PMID:25926803

  1. Vision-based coaching: Optimizing resources for leader development

    Directory of Open Access Journals (Sweden)

    Angela M. Passarelli

    2015-04-01

    Full Text Available Leaders develop in the direction of their dreams, not in the direction of their deficits. Yet many coaching interactions intended to promote a leader’s development fail to leverage the developmental benefits of the individual’s personal vision. Drawing on Intentional Change Theory, this article postulates that coaching interactions that emphasize a leader’s personal vision (future aspirations and core identity evoke a psychophysiological state characterized by positive emotions, cognitive openness, and optimal neurobiological functioning for complex goal pursuit. Vision-based coaching, via this psychophysiological state, generates a host of relational and motivational resources critical to the developmental process. These resources include: formation of a positive coaching relationship, expansion of the leader’s identity, increased vitality, activation of learning goals, and a promotion-orientation. Organizational outcomes as well as limitations to vision-based coaching are discussed.

  2. Development of Advanced Ceramic Manufacturing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Pujari, V.K.

    2001-04-05

    Advanced structural ceramics are enabling materials for new transportation engine systems that have the potential for significantly reducing energy consumption and pollution in automobiles and heavy vehicles. Ceramic component reliability and performance have been demonstrated in previous U.S. DOE initiatives, but high manufacturing cost was recognized as a major barrier to commercialization. Norton Advanced Ceramics (NAC), a division of Saint-Gobain Industrial Ceramics, Inc. (SGIC), was selected to perform a major Advanced Ceramics Manufacturing Technology (ACMT) Program. The overall objectives of NAC's program were to design, develop, and demonstrate advanced manufacturing technology for the production of ceramic exhaust valves for diesel engines. The specific objectives were (1) to reduce the manufacturing cost by an order of magnitude, (2) to develop and demonstrate process capability and reproducibility, and (3) to validate ceramic valve performance, durability, and reliability. The program was divided into four major tasks: Component Design and Specification, Component Manufacturing Technology Development, Inspection and Testing, and Process Demonstration. A high-power diesel engine valve for the DDC Series 149 engine was chosen as the demonstration part for this program. This was determined to be an ideal component type to demonstrate cost-effective process enhancements, the beneficial impact of advanced ceramics on transportation systems, and near-term commercialization potential. The baseline valve material was NAC's NT451 SiAION. It was replaced, later in the program, by an alternate silicon nitride composition (NT551), which utilized a lower cost raw material and a simplified powder-processing approach. The material specifications were defined based on DDC's engine requirements, and the initial and final component design tasks were completed.

  3. Development of a battery of functional tests for low vision.

    Science.gov (United States)

    Dougherty, Bradley E; Martin, Scott R; Kelly, Corey B; Jones, Lisa A; Raasch, Thomas W; Bullimore, Mark A

    2009-08-01

    We describe the development and evaluation of a battery of tests of functional visual performance of everyday tasks intended to be suitable for assessment of low vision patients. The functional test battery comprises-Reading rate: reading aloud 20 unrelated words for each of four print sizes (8, 4, 2, & 1 M); Telephone book: finding a name and reading the telephone number; Medicine bottle label: reading the name and dosing; Utility bill: reading the due date and amount due; Cooking instructions: reading cooking time on a food package; Coin sorting: making a specified amount from coins placed on a table; Playing card recognition: identifying denomination and suit; and Face recognition: identifying expressions of printed, life-size faces at 1 and 3 m. All tests were timed except face and playing card recognition. Fourteen normally sighted and 24 low vision subjects were assessed with the functional test battery. Visual acuity, contrast sensitivity, and quality of life (National Eye Institute Visual Function Questionnaire 25 [NEI-VFQ 25]) were measured and the functional tests repeated. Subsequently, 23 low vision patients participated in a pilot randomized clinical trial with half receiving low vision rehabilitation and half a delayed intervention. The functional tests were administered at enrollment and 3 months later. Normally sighted subjects could perform all tasks but the proportion of trials performed correctly by the low vision subjects ranged from 35% for face recognition at 3 m, to 95% for the playing card identification. On average, low vision subjects performed three times slower than the normally sighted subjects. Timed tasks with a visual search component showed poorer repeatability. In the pilot clinical trial, low vision rehabilitation produced the greatest improvement for the medicine bottle and cooking instruction tasks. Performance of patients on these functional tests has been assessed. Some appear responsive to low vision rehabilitation.

  4. Fuel Cell Manufacturing Research and Development | Hydrogen and Fuel Cells

    Science.gov (United States)

    | NREL Fuel Cell Manufacturing Research and Development Fuel Cell Manufacturing Research and Development NREL's fuel cell manufacturing R&D focuses on improving quality-inspection practices for high costs. A researcher monitoring web-line equipment in the Manufacturing Laboratory Many fuel cell

  5. Life cycle management and assessment: approaches and visions towards sustainable manufacturing

    DEFF Research Database (Denmark)

    Westkämper, Engelbert; Alting, Leo; Arndt, Günther

    2000-01-01

    . The goal of this approach is to protect resources and maximize effectiveness by means of life cycle assessment, product data management, technical support and, last but not least, life cycle costing. This paper shows the existing approaches of LCM and discusses their prospects and further development....... concepts are required, new regulations have been passed or consumer values are changing, the differences between business areas are disappearing. Life cycle management (LCM) considers the product life cycle as a whole and optimizes the interaction of product design, manufacturing and life cycle activities...

  6. Life cycle management and assessment: approaches and visions towards sustainable manufacturing

    DEFF Research Database (Denmark)

    Westkämper, Engelbert; Alting, Leo; Arndt, Günther

    2001-01-01

    and optimizes the interaction of product design, manufacturing and life cycle activities. The goal of this approach is to protect resources and maximize effectiveness by means of life cycle assessment, product data management, technical support and, last but not least, life cycle costing. This paper shows....... Economically successful business areas can also be explored. Whether new service concepts are required, new regulations have been passed or consumer values are changing, the differences between business areas are disappearing. Life cycle management (LCM) considers the product life cycle as a whole...... the existing approaches of LCM and discusses their prospects and further development....

  7. Manufacturing development of low activation vanadium alloys

    International Nuclear Information System (INIS)

    Smith, J.P.; Johnson, W.R.; Baxi, C.B.

    1996-10-01

    General Atomics is developing manufacturing methods for vanadium alloys as part of a program to encourage the development of low activation alloys for fusion use. The culmination of the program is the fabrication and installation of a vanadium alloy structure in the DIII-D tokamak as part of the Radiative Divertor modification. Water-cooled vanadium alloy components will comprise a portion of the new upper divertor structure. The first step, procuring the material for this program has been completed. The largest heat of vanadium alloy made to date, 1200 kg of V-4Cr-4Ti, has been produced and is being converted into various product forms. Results of many tests on the material during the manufacturing process are reported. Research into potential fabrication methods has been and continues to be performed along with the assessment of manufacturing processes particularly in the area of joining. Joining of vanadium alloys has been identified as the most critical fabrication issue for their use in the Radiative Divertor Program. Joining processes under evaluation include resistance seam, electrodischarge (stud), friction and electron beam welding. Results of welding tests are reported. Metallography and mechanical tests are used to evaluate the weld samples. The need for a protective atmosphere during different welding processes is also being determined. General Atomics has also designed, manufactured, and will be testing a helium-cooled, high heat flux component to assess the use of helium cooled vanadium alloy components for advanced tokamak systems. The component is made from vanadium alloy tubing, machined to enhance the heat transfer characteristics, and joined to end flanges to allow connection to the helium supply. Results are reported

  8. In-Space Manufacturing Project (prior to FY15: Additive Manufacturing Technology Development)

    Data.gov (United States)

    National Aeronautics and Space Administration — The In-Space Manufacturing (ISM) project is responsible for developing the manufacturing capabilities that will provide on-demand, sustainable operations during NASA...

  9. Application of Case Based Reasoning in Strategic Manufacturing Vision Development

    DEFF Research Database (Denmark)

    Wang, Chengbo

    The thesis consists of three journal articles (one published in Journal of Industrial Management and Data Systems, nine pages, and two accepted for publication in International Journal of Learning and Intellectual Capital, and Journal of Production Planning & Control, 10 and 22 pages respectively...

  10. Developing a Shared Leadership Vision in a College Setting

    Science.gov (United States)

    Fierke, Kerry K.

    2014-01-01

    The University of Minnesota College of Pharmacy is nationally recognized for its leadership curriculum. Despite the College's success in developing student leaders, an overall guiding leadership philosophy within the College has not been specifically articulated. To begin the process of developing a shared leadership vision, a democratic,…

  11. Theorizing about technological development of manufacturing companies

    DEFF Research Database (Denmark)

    Matthiesen, Rikke Vestergaard

    2012-01-01

    The aim of the paper is to apply metatriangulation and theory building to strengthen our theorizing on technological development of manufacturing firms. AMT literature is reviewed and by means of bracketing, the paper identifies a set of problematic assumptions embedded within traditional AMT...... research. A case study is used to emphasize how a process perspective enriches the traditional structural perspective. Finally, through first attempts at theory building, a set of propositions is suggested in order to overcome long-standing problems found in AMT research....

  12. Trends and developments in industrial machine vision: 2013

    Science.gov (United States)

    Niel, Kurt; Heinzl, Christoph

    2014-03-01

    When following current advancements and implementations in the field of machine vision there seems to be no borders for future developments: Calculating power constantly increases, and new ideas are spreading and previously challenging approaches are introduced in to mass market. Within the past decades these advances have had dramatic impacts on our lives. Consumer electronics, e.g. computers or telephones, which once occupied large volumes, now fit in the palm of a hand. To note just a few examples e.g. face recognition was adopted by the consumer market, 3D capturing became cheap, due to the huge community SW-coding got easier using sophisticated development platforms. However, still there is a remaining gap between consumer and industrial applications. While the first ones have to be entertaining, the second have to be reliable. Recent studies (e.g. VDMA [1], Germany) show a moderately increasing market for machine vision in industry. Asking industry regarding their needs the main challenges for industrial machine vision are simple usage and reliability for the process, quick support, full automation, self/easy adjustment at changing process parameters, "forget it in the line". Furthermore a big challenge is to support quality control: Nowadays the operator has to accurately define the tested features for checking the probes. There is an upcoming development also to let automated machine vision applications find out essential parameters in a more abstract level (top down). In this work we focus on three current and future topics for industrial machine vision: Metrology supporting automation, quality control (inline/atline/offline) as well as visualization and analysis of datasets with steadily growing sizes. Finally the general trend of the pixel orientated towards object orientated evaluation is addressed. We do not directly address the field of robotics taking advances from machine vision. This is actually a fast changing area which is worth an own

  13. Recent development of cellular manufacturing systems

    Indian Academy of Sciences (India)

    be manufactured in a cell, and the machines, which will comprise that cell, can be ... approaches for the CF problem which is referred to as Production Flow Analysis (PFA). ... programming model of cellular manufacturing system design which ...

  14. Development and validation of a multidimensional measure of lean manufacturing

    Directory of Open Access Journals (Sweden)

    Juan A. Marin-Garcia

    2010-02-01

    Full Text Available In the last 30 years of research of lean manufacturing many different questionnaires was proposed to check the degree of the use of the concept. The set of the items used changed considerably from one investigation to another one. Until now isn’t appreciate a movement that converge towards the use, by the investigators, of a few instruments whose validity and reliability have been compared in different surroundings. In fact, the majority of investigations are based on ad-hoc questionnaires and a few of them present the questionnaire validation checking only the unidimensionality and -Cronbach. Nevertheless it seems to have a consensus in identifying 5 big constructs that compose the lean manufacturing (TQM, JIT, TPM, supply chain management and high-involvement. Our research has consisted of identifying and summarizing the models that have been published previously to add the items in constructs or sub-scales of constructs. Later we developed an integrating questionnaire, starting off of the items that appeared in previous investigations. Finally we realized the sub-scales and models validation through a confirmatory factorial analysis, using date of a sample of Spanish Sheltered Work Centre’s (N=128. Of all proposed models, the best an adjustment takes place with the first order model with 20 sub-scales. Our investigation contributes to an integrating vision of the published models and the lean manufacturing sub-scales validity and reliability verification raised by other investigators. Due to his confirming approach, it can serve as generalization of studies that had been realized in contexts with different samples to which we have used for the replication.

  15. The development of assistive courseware for young low vision ...

    African Journals Online (AJOL)

    AC), which is named as AC for Low Vision Learners (AC4LV). The AC was developed by utilizing Multiple Intelligence (MI) theory as guidance. In addition, three basic steps, which are pre-production, production, and post-production have been ...

  16. Deaf and Hearing Children: A Comparison of Peripheral Vision Development

    Science.gov (United States)

    Codina, Charlotte; Buckley, David; Port, Michael; Pascalis, Olivier

    2011-01-01

    This study investigated peripheral vision (at least 30[degrees] eccentric to fixation) development in profoundly deaf children without cochlear implantation, and compared this to age-matched hearing controls as well as to deaf and hearing adult data. Deaf and hearing children between the ages of 5 and 15 years were assessed using a new,…

  17. MARKETING CONCEPT - MODERN VISION FOR TOURISM DEVELOPMENT

    OpenAIRE

    Marius BOIŢĂ

    2014-01-01

    Nowadays marketing appears to be the result of long efforts of generalization and reflection of economical theory regarding marketing practice that has emerged and developed as a consequence of contemporary social and economic dynamism. Through the implementation of an effective marketing system and modern Romanian tourism, constantly improving quality performance of products or services will be provided towards achieving a performing tourism. The recent ongoing development of touris...

  18. Sustainable vaccine development: a vaccine manufacturer's perspective.

    Science.gov (United States)

    Rappuoli, Rino; Hanon, Emmanuel

    2018-05-08

    Vaccination remains the most cost-effective public health intervention after clean water, and the benefits impressively outweigh the costs. The efforts needed to fulfill the steadily growing demands for next-generation and novel vaccines designed for emerging pathogens and new indications are only realizable in a sustainable business model. Vaccine development can be fast-tracked through strengthening international collaborations, and the continuous innovation of technologies to accelerate their design, development, and manufacturing. However, these processes should be supported by a balanced project portfolio, and by managing sustainable vaccine procurement strategies for different types of markets. Collectively this will allow a gradual shift to a more streamlined and profitable vaccine production, which can significantly contribute to the worldwide effort to shape global health. Copyright © 2018 GlaxoSmithKine Biologicals SA. Published by Elsevier Ltd.. All rights reserved.

  19. MARKETING CONCEPT - MODERN VISION FOR TOURISM DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Marius BOIŢĂ

    2014-12-01

    Full Text Available Nowadays marketing appears to be the result of long efforts of generalization and reflection of economical theory regarding marketing practice that has emerged and developed as a consequence of contemporary social and economic dynamism. Through the implementation of an effective marketing system and modern Romanian tourism, constantly improving quality performance of products or services will be provided towards achieving a performing tourism. The recent ongoing development of tourism, vast global expansion, the development of tourism in tourist reception structures by applying a suitable marketing will increase the tourism potential consumer’s satisfaction. In order to obtain a sustainable position in the tourism market and tourism companies must address complex marketing plan strategies.

  20. Systematic construction and control of stereo nerve vision network in intelligent manufacturing

    Science.gov (United States)

    Liu, Hua; Wang, Helong; Guo, Chunjie; Ding, Quanxin; Zhou, Liwei

    2017-10-01

    A system method of constructing stereo vision by using neural network is proposed, and the operation and control mechanism in actual operation are proposed. This method makes effective use of the neural network in learning and memory function, by after training with samples. Moreover, the neural network can learn the nonlinear relationship in the stereoscopic vision system and the internal and external orientation elements. These considerations are Worthy of attention, which includes limited constraints, the scientific of critical group, the operating speed and the operability in technical aspects. The results support our theoretical forecast.

  1. Vision Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Vision Lab personnel perform research, development, testing and evaluation of eye protection and vision performance. The lab maintains and continues to develop...

  2. Create a new vision for indigenous development

    Energy Technology Data Exchange (ETDEWEB)

    Chavez Alba, Rafael; Sanchez Arancibia, Oscar Armando [TRANSIERRA S.A., Santa Cruz (Bolivia)

    2009-07-01

    Transierra is a Bolivian company created in the year 2000 with the goal of transporting natural gas from the fields of San Alberto and San Antonio, in Tarija, to the Rio Grande Gas Compression Plant in Santa Cruz, for export to Brazil. Transierra has implemented a Social Action Plan, which allowed it to execute more than 800 community projects for the benefit of over 40 thousand families living in it's area of influence, with the presence of 146 indigenous communities, generally lagging behind in economic and productive life in the region and country. The Support Program to Guarani Development Plans (PA-PDG) is part of the Social Plan and is part of a long-term agreement signed between Transierra and indigenous organizations. The program has implemented more than one hundred projects for productive development, health, education, cultural revaluation, and strengthening organizational infrastructure, generating huge benefits in improving the living conditions of thousands of families of the Guarani people. This year a unique initiative was created with 4 Indigenous Captains and with the support of the International Finance Corporation (World Bank Group), including Business Plans to promote sustainable economic growth, created productive economic cycles involving improvements to the production and productivity to enter the commercial distribution of local and national markets. These four initiatives have meant a shift in the implementation and is helping to generate new dynamics in production, in addition to capturing significant resources from public and private investment, laying the groundwork for the improvement of the incomes and quality of life of its beneficiaries. (author)

  3. Develop and Manufacture an airlock sliding tray

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, Cindy M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-02-26

    The goal of this project is to continue to develop an airlock sliding tray and then partner with an industrial manufacturing company for production. The sliding tray will be easily installed into and removed from most glovebox airlocks in a few minutes. Technical Approach: A prototype of a sliding tray has been developed and tested in the LANL cold lab and 35 trays are presently being built for the plutonium facility (PF-4). The current, recently approved design works for a 14-inch diameter round airlock and has a tray length of approximately 20 inches. The grant will take the already tested and approved round technology and design for the square airlock. These two designs will be suitable for the majority of the existing airlocks in the multitude of DOE facilities. Partnering with an external manufacturer will allow for production of the airlock trays at a much lower cost and increase the availability of the product for all DOE sites. Project duration is estimated to be 12-13 months. Benefits: The purpose of the airlock sliding trays is fourfold: 1) Mitigate risk of rotator cuff injuries, 2) Improve ALARA, 3) Reduce risk of glovebox glove breaches and glove punctures, and 4) Improve worker comfort. I have had the opportunity to visit many other DOE facilities including Savannah, Y-12, ORNL, Sandia, and Livermore for assistance with ergonomic problems and/or injuries. All of these sites would benefit from the airlock sliding tray and I can assume all other DOE facilities with gloveboxes built prior to 1985 could also use the sliding trays.

  4. Manufacturing Capacity Utilization and Industrial Development in ...

    African Journals Online (AJOL)

    FIRST LADY

    utilization in the late 1970s was as high as 78.70 percent and nosedived to as low as 43.80 percent in the 1980s. Between ... through a regime of high inflation rate which makes domestic manufacturers and domestic market ... However, inflation and loans and advances to manufacturing were found to have negative effect.

  5. Development of Cranial Bone Surrogate Structures Using Stereolithographic Additive Manufacturing

    Science.gov (United States)

    2017-09-29

    Additive Manufacturing by Jared M Gardner and Thomas A Plaisted Approved for public release; distribution is unlimited...Laboratory Development of Cranial Bone Surrogate Structures Using Stereolithographic Additive Manufacturing by Thomas A Plaisted Weapons...Structures Using Stereolithographic Additive Manufacturing 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Jared

  6. NASA Game Changing Development Program Manufacturing Innovation Project

    Science.gov (United States)

    Tolbert, Carol; Vickers, John

    2011-01-01

    This presentation examines the new NASA Manufacturing Innovation Project. The project is a part of the Game Changing Development Program which is one element of the Space Technology Programs Managed by Office of the Chief Technologist. The project includes innovative technologies in model-based manufacturing, digital additive manufacturing, and other next generation manufacturing tools. The project is also coupled with the larger federal initiatives in this area including the National Digital Engineering and Manufacturing Initiative and the Advanced Manufacturing Partnership. In addition to NASA, other interagency partners include the Department of Defense, Department of Commerce, NIST, Department of Energy, and the National Science Foundation. The development of game-changing manufacturing technologies are critical for NASA s mission of exploration, strengthening America s manufacturing competitiveness, and are highly related to current challenges in defense manufacturing activities. There is strong consensus across industry, academia, and government that the future competitiveness of U.S. industry will be determined, in large part, by a technologically advanced manufacturing sector. This presentation highlights the prospectus of next generation manufacturing technologies to the challenges faced NASA and by the Department of Defense. The project focuses on maturing innovative/high payoff model-based manufacturing technologies that may lead to entirely new approaches for a broad array of future NASA missions and solutions to significant national needs. Digital manufacturing and computer-integrated manufacturing "virtually" guarantee advantages in quality, speed, and cost and offer many long-term benefits across the entire product lifecycle. This paper addresses key enablers and emerging strategies in areas such as: Current government initiatives, Model-based manufacturing, and Additive manufacturing.

  7. Development and Manufacture of the Nuclear Laboratory Equipment

    International Nuclear Information System (INIS)

    Youm, Ki Un; Kim, J. K.; Kim, K. S.; Lee, I. B.; Youm, J. H.; Park, I. W.

    2008-12-01

    This report on development and manufacture of the nuclear laboratory equipment contains the work scope and contents performed for supporting the researches and the developments projects efficiently. And also, the records for the principal production design, the manufacture contents, the working drawings and the CNC program are described in it. Most of works are to support the successful and convenient performance of the R and D projects by development and manufacturing the requested laboratory equipment

  8. Development and Manufacture of the Nuclear Laboratory Equipment

    International Nuclear Information System (INIS)

    Youm, Ki Un; Moon, J. S.; Lee, I. B.; Youn, J. H.

    2010-12-01

    This report on development and manufacture of the nuclear laboratory equipment contains the work scope and contents performed for supporting the researches and the developments projects efficiently. And also, the records for the principal production design, the manufacture contents, the working drawings and the CNC program are described in it. Most of works are to support the successful and convenient performance of the R and D projects by development and manufacturing the requested laboratory equipment

  9. Development and Manufacture of the Nuclear laboratory equipment

    International Nuclear Information System (INIS)

    Youm, Ki Un; Lee, I. B.; Youm, J. H.

    2009-12-01

    This report on development and manufacture of the nuclear laboratory equipment contains the work scope and contents performed for supporting the researches and the developments projects efficiently. And also, the records for the principal production design, the manufacture contents, the working drawings and the CNC program are described in it. Most of works are to support the successful and convenient performance of the R and D projects by development and manufacturing the requested laboratory equipment

  10. Vision Development towards a Sustainable North Rhine-Westphalia 2030 in a Science-Practice-Dialogue

    Directory of Open Access Journals (Sweden)

    Miriam Müller

    2017-06-01

    Full Text Available The paper presents the results of a participatory vision development process in the Federal State of North Rhine-Westphalia (NRW in Germany. The vision development was part of a scientific research project that accompanied the development of a sustainability strategy for NRW at state level. The Sustainability Strategy NRW was adopted in July 2016 and contains parts of the vision developed in the research project: Sentences from the narrative text vision and proposed targets and indicators that back-up the vision for a sustainable NRW in 2030 were used by the state of NRW. The vision was developed in iterative steps in three consecutive dialogue rounds with different stakeholders from science and practice. The paper presents the methodological approach and the results of the vision formulation process. The paper discusses the lessons learned from the vision development—from both practical and theoretical perspectives of transition management. The paper explores the relevance of setting ambitious targets for sustainable development as part of a state strategy by taking the proposed target of a “4 × 25% modal split” by 2030 as an example. The project demonstrated that a participatory approach for vision development is time and resource consuming, but worth the effort as it improves the quality and acceptance of a vision. Furthermore, the project demonstrated that transformative science contributes valuable inputs for sustainability transitions and for facilitating participatory vision development.

  11. PDC Journeys to Product Analysis Development and Additive Manufacturing?

    International Nuclear Information System (INIS)

    Shalina Sheik Muhamad

    2015-01-01

    The technology for product development and manufacturing has gone through many advancements. It is widely recognised that it would provide competitive advantage for engineering organization in term of product development cycle, productivity, sustainability and efficiency. We begin by describing the general characteristic of design process that will need to be integrated in product life cycle management. In Nuclear Malaysia, especially in engineering design activities the majority have been using 3D modelling. This paper discusses on the current product design practiced in Nuclear Malaysia, new product development process and new manufacturing technique which is additive manufacturing. (author)

  12. Development of polymer catalyst manufacturing technology

    International Nuclear Information System (INIS)

    Chung, Heung Seok; Kim, Yong Ik; Lee, Han Soo; Kang, Hui Seok; Seong, Ki Ung; Na, Jeong Won; An, Do Hui; Kim, Kwang Rak; Cho, Young Hyeon; Baek, Seung Uh; Jeong, Yong Won

    1993-01-01

    Heavy water is used as moderator and coolant in Pressurized Heavy Water Power Plants. According to the governmental long-term plan for power supply, Korea is scheduled to construct new six pressurized heavy water power plants till the year 2006. Total heavy water demand for these plants would be 3892 Mg during the period 1992-2006. Reformed hydrogen processes are considered best suited to Korea. Hydrophobic catalysts for this process were manufactured and the performance of hydrogen isotope exchance was investigated. The overall mass transfer coefficients varied between 0.004 and 2.295 m 3 HD/m 3 Bed.sec. and heavy water separation processes using the catalysts were optimized. (Author)

  13. The Experiment Method for Manufacturing Grid Development on Single Computer

    Institute of Scientific and Technical Information of China (English)

    XIAO Youan; ZHOU Zude

    2006-01-01

    In this paper, an experiment method for the Manufacturing Grid application system development in the single personal computer environment is proposed. The characteristic of the proposed method is constructing a full prototype Manufacturing Grid application system which is hosted on a single personal computer with the virtual machine technology. Firstly, it builds all the Manufacturing Grid physical resource nodes on an abstraction layer of a single personal computer with the virtual machine technology. Secondly, all the virtual Manufacturing Grid resource nodes will be connected with virtual network and the application software will be deployed on each Manufacturing Grid nodes. Then, we can obtain a prototype Manufacturing Grid application system which is working in the single personal computer, and can carry on the experiment on this foundation. Compared with the known experiment methods for the Manufacturing Grid application system development, the proposed method has the advantages of the known methods, such as cost inexpensively, operation simple, and can get the confidence experiment result easily. The Manufacturing Grid application system constructed with the proposed method has the high scalability, stability and reliability. It is can be migrated to the real application environment rapidly.

  14. Quality inspection guided laser processing of irregular shape objects by stereo vision measurement: application in badminton shuttle manufacturing

    Science.gov (United States)

    Qi, Li; Wang, Shun; Zhang, Yixin; Sun, Yingying; Zhang, Xuping

    2015-11-01

    The quality inspection process is usually carried out after first processing of the raw materials such as cutting and milling. This is because the parts of the materials to be used are unidentified until they have been trimmed. If the quality of the material is assessed before the laser process, then the energy and efforts wasted on defected materials can be saved. We proposed a new production scheme that can achieve quantitative quality inspection prior to primitive laser cutting by means of three-dimensional (3-D) vision measurement. First, the 3-D model of the object is reconstructed by the stereo cameras, from which the spatial cutting path is derived. Second, collaborating with another rear camera, the 3-D cutting path is reprojected to both the frontal and rear views of the object and thus generates the regions-of-interest (ROIs) for surface defect analysis. An accurate visual guided laser process and reprojection-based ROI segmentation are enabled by a global-optimization-based trinocular calibration method. The prototype system was built and tested with the processing of raw duck feathers for high-quality badminton shuttle manufacture. Incorporating with a two-dimensional wavelet-decomposition-based defect analysis algorithm, both the geometrical and appearance features of the raw feathers are quantified before they are cut into small patches, which result in fully automatic feather cutting and sorting.

  15. Integrating developing country manufacturing industries into global supply chain

    Directory of Open Access Journals (Sweden)

    Fasika Bete Georgise

    2014-01-01

    Full Text Available Purpose: Due to globalization of manufacturing activities, the arena of competition and competitiveness advantage is moving from firms towards supply chains and networks. With the recent advancement of information and communication technologies this participation are becoming as common business practice in developed countries firms. Companies were more integrated into the world market for the global nature of the sourcing, manufacturing and distribution. These changes create both challenges and opportunities for the manufacturing industries in developing countries. The objective of this paper is to examine the level of inter-organizational and intra-organizational supply chain integration practices in developing country, Ethiopia.Design/methodology/approach: An industrial questionnaires survey was used to collect the current practices of the manufacturing industries in Ethiopia as an example of the developing countries. Descriptive statistics is primarily used for the analysis.Findings: Results show a low level of supply chain relationship both in intra and inter organizational supply chain integration level among members. Accordingly, such issues require much attention to facilitate a greater integration within the supply chains in the Ethiopian manufacturing industries.Research limitations/implications: The paper focuses on examining the practices of Ethiopian manufacturing industries empirical data. The interpretation of results should be taken with prudence.Originality/Value: The manufacturing industry in developing countries (MIDC has been a part of the global supply chains for long time as a supplier of raw material and manufacturer of primary products. Currently, the MIDC is trying to access the different markets segment of the world even with new products starting from their local market to the complex and dynamic international market. Nevertheless, their supply chains are inefficient and hence, their competitiveness level far from the

  16. China and the Manufacturing Exports of Other Developing Countries

    OpenAIRE

    Gordon H. Hanson; Raymond Robertson

    2008-01-01

    In this paper, we examine the impact of China's growth on developing countries that specialize in manufacturing. Over 2000-2005, manufacturing accounted for 32% of China's GDP and 89% of its merchandise exports, making it more specialized in the sector than any other large developing economy. Using the gravity model of trade, we decompose bilateral trade into components associated with demand conditions in importing countries, supply conditions in exporting countries, and bilateral trade cost...

  17. Application of the SP theory of intelligence to the understanding of natural vision and the development of computer vision.

    Science.gov (United States)

    Wolff, J Gerard

    2014-01-01

    The SP theory of intelligence aims to simplify and integrate concepts in computing and cognition, with information compression as a unifying theme. This article is about how the SP theory may, with advantage, be applied to the understanding of natural vision and the development of computer vision. Potential benefits include an overall simplification of concepts in a universal framework for knowledge and seamless integration of vision with other sensory modalities and other aspects of intelligence. Low level perceptual features such as edges or corners may be identified by the extraction of redundancy in uniform areas in the manner of the run-length encoding technique for information compression. The concept of multiple alignment in the SP theory may be applied to the recognition of objects, and to scene analysis, with a hierarchy of parts and sub-parts, at multiple levels of abstraction, and with family-resemblance or polythetic categories. The theory has potential for the unsupervised learning of visual objects and classes of objects, and suggests how coherent concepts may be derived from fragments. As in natural vision, both recognition and learning in the SP system are robust in the face of errors of omission, commission and substitution. The theory suggests how, via vision, we may piece together a knowledge of the three-dimensional structure of objects and of our environment, it provides an account of how we may see things that are not objectively present in an image, how we may recognise something despite variations in the size of its retinal image, and how raster graphics and vector graphics may be unified. And it has things to say about the phenomena of lightness constancy and colour constancy, the role of context in recognition, ambiguities in visual perception, and the integration of vision with other senses and other aspects of intelligence.

  18. Integration of Manufacturing and Development in Emerging Markets

    DEFF Research Database (Denmark)

    Søberg, Peder Veng; Wæhrens, Brian Vejrum

    2011-01-01

    The paper investigates the problems related to functional integration between manufacturing activities and R&D activities in emerging markets within multinational companies. A framework to this end is developed and illustrated in relation to four cases from multinational companies, which have...... established R&D and manufacturing in China or India. The findings point to the importance of contingencies such as industrial clock speed, technological complexity, as well as the extent to which local adaptation is needed. Keywords: Co-location, Emerging markets, Functional integration, Manufacturing, R&D....

  19. Results from ITER Vacuum Vessel Sector Manufacturing Development in Europe

    International Nuclear Information System (INIS)

    Jones, L.

    2006-01-01

    Significant results have been achieved since the previous SOFT conference, when the manufacturing development work required to prepare for the ITER Vacuum Vessel Sector was described. The contract for the manufacture of a full-size, 20 Ton poloidal part of the inboard section, fabricated according to the ITER reference manufacturing route, including bracing fixtures, welding applications, restraint effects, and fit-up aspects is approaching completion. Since the main aim of the work is to establish the practicability of achieving the tight dimensional tolerances, an accompanying SYSWELD analysis programme has been validation by instrumented welding coupons, and then used for predicting the distortion of the actual construction. A local machining tool has been developed to allow the requirement for machining of the cylindrical features at a late stage of manufacture. Experimental and analytical work has also been carried out to establish the possibility of 3-D cold-forming large sections of walls of the VV. A manufacturing programme to validate an alternative method of fabricating parts of the double-walled VV, utilising e-beam welding only and avoiding the quality issues of the one-sided access and inspection of the closing welds is presented. This paper describes the results of the manufacturing development programme and the future activities. (author)

  20. Stakeholder Visions for Biodiversity Conservation in Developing Countries

    Directory of Open Access Journals (Sweden)

    Ademola A. Adenle

    2014-12-01

    Full Text Available The 2014 Conference of the Parties (COP 12 for the Convention on Biological Diversity (CBD was another step on the road to achieving the Aichi Targets the CBD agreed in 2010. It was also a key step on the way to making progress towards the vision of a more balanced relationship between people and the rest of biodiversity by 2050. Many key issues were left for this COP by negotiators from COP 11 and earlier meetings; such as settling financial issues, articulating clearly the Aichi Targets for national implementation by 2020, or providing clear guidance on capacity-building for developing states. This paper utilizes 22 stakeholder interviews taken at the 2012 Hyderabad COP to develop discussion of ongoing issues in the CBD negotiations. These interviews yielded a number of tractable policy opportunities available for the 2014 Conference to create significant space for developing countries to contribute effectively to global achievement of the Aichi Targets. Breakthroughs and developments at the COP, despite the inevitability of some difficult discussions, will be provided by developing country perspectives. Despite that potential traction, Ministers at the high-level segment noted that progress towards the Aichi targets is insufficient and recognizing there was still much to do on resource mobilization, reaffirmed their commitment to mobilize financial resources from all sources for the effective implementation of the Strategic Plan for Biodiversity 2011–2020. As we enter the second half of the 2011–2020 decade, developing countries must be placed at the center of efforts to improve sustainable use, conservation and benefit sharing of biodiversity around the world.

  1. Development of stable isotope manufacturing in Russia

    International Nuclear Information System (INIS)

    Pokidychev, A.; Pokidycheva, M.

    1999-01-01

    For the past 25 years, Russia has relied heavily on the electromagnetic separation process for the production of middle and heavy mass stable isotopes. The separation of most light isotopes had been centered in Georgia which, after the collapse of the USSR, left Russia without this capability. In the mid-1970s, development of centrifuge technology for the separation of stable isotopes was begun. Alternative techniques such as laser separation, physical-chemical methods, and ion cyclotron resonance have also been investigated. Economic considerations have played a major role in the development and current status of the stable isotope enrichment capabilities of Russia

  2. Developments in medical image processing and computational vision

    CERN Document Server

    Jorge, Renato

    2015-01-01

    This book presents novel and advanced topics in Medical Image Processing and Computational Vision in order to solidify knowledge in the related fields and define their key stakeholders. It contains extended versions of selected papers presented in VipIMAGE 2013 – IV International ECCOMAS Thematic Conference on Computational Vision and Medical Image, which took place in Funchal, Madeira, Portugal, 14-16 October 2013.  The twenty-two chapters were written by invited experts of international recognition and address important issues in medical image processing and computational vision, including: 3D vision, 3D visualization, colour quantisation, continuum mechanics, data fusion, data mining, face recognition, GPU parallelisation, image acquisition and reconstruction, image and video analysis, image clustering, image registration, image restoring, image segmentation, machine learning, modelling and simulation, object detection, object recognition, object tracking, optical flow, pattern recognition, pose estimat...

  3. Manufacturing development for the SAFE 100 kW core

    International Nuclear Information System (INIS)

    Carter, Robert; Roman, Jose; Salvail, Pat

    2002-01-01

    In stark contrast to what is sometimes considered the norm in traditional manufacturing processes, engineers at the Marshall Space Flight Center (MSFC) arc in the practice of altering the standard in an effort to realize other potential methods in core manufacturing. While remaining within the bounds of the materials database, we are researching into core manufacturing techniques that may have been overlooked in the past due to funding and/or time constraints. To augment proven core fabrication capabilities we are pursuing plating processes as another possible method for core build-up and assembly. Although brazing and a proprietary HIP cycle are used for module assembly (proven track record for stability and endurance), it is prudent to pursue secondary or backup methods of module and core assembly. For this reason heat tube manufacture and module assembly by means of plating is being investigated. Potentially, the plating processes will give engineers the ability to manufacture replacement modules for any module that might fail to perform nominally, and to assemble/disassemble a complete core in much less time than would be required for the conventional Braze-HIP process. Another area of improvement in core manufacturing capabilities is the installation of a sodium and lithium liquid metal heat pipe fill machine. This, along with the ability to Electron Beam Weld heat pipe seals and wet-in the pipes in the necessary vacuum atmosphere, will eliminate the need to ship potentially hazardous components outside for processing. In addition to developing core manufacturing techniques, the SAFE manufacturing team has been evaluating the thermal heat transfer characteristics, and manufacturability of several heat exchanger design concepts

  4. Development of MOX manufacturing technology in BNFL

    International Nuclear Information System (INIS)

    Buchan, P.G.; Powell, D.J.; Edwards, J.

    1998-01-01

    BNFL is successfully operating a small scale MOX fuel fabrication facility at its Sellafield Site and is currently constructing an advanced, commercial scale MOX facility to complement its existing LWR UO 2 fabrication capability. BNFL's MOX fuel capability is fully supported by a comprehensive technology development programme aimed at providing a high quality product which is successfully competing in the market. Building on the experience gained over the last 30 years, is from the production of both thermal and fast reactor MOX fuels, BNFL's development team set a standard for its MOX product which is targeted at exceeding the performance of UO 2 fuel in reactor. In order to meet the stringent design requirements the product development team has introduced the Short Binderless Route (SBR) process that is now used routinely in BNFL's MOX Demonstration Facility (MDF) and which forms the basis for BNFL's large scale Sellafield MOX Plant. This plant not only uses the SBR process for MOX production but also incorporates the most advanced technology available anywhere in the world for nuclear fuel production. A detailed account of the technology developed by BNFL to support its MOX fuels business will be provided, together with an explanation of the processes and plants used for MOX fuel production by BNFL. The paper also looks at the future needs of the MOX business and how improvements in pellet design can assist the MOX fabrication production process to meet the user demand requirements of utilities around the world. (author)

  5. Manufacturing Enterprise in Asia | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2012-08-23

    Aug 23, 2012 ... ... of the distribution of enterprises by size across Asia, including India, Japan, ... enterprise development and its overall impact on the economy. ... His main areas of research interest are industry, poverty, labour, and employment, ... In partnership with UNESCO's Organization for Women in Science for the ...

  6. Recent advances in the development and transfer of machine vision technologies for space

    Science.gov (United States)

    Defigueiredo, Rui J. P.; Pendleton, Thomas

    1991-01-01

    Recent work concerned with real-time machine vision is briefly reviewed. This work includes methodologies and techniques for optimal illumination, shape-from-shading of general (non-Lambertian) 3D surfaces, laser vision devices and technology, high level vision, sensor fusion, real-time computing, artificial neural network design and use, and motion estimation. Two new methods that are currently being developed for object recognition in clutter and for 3D attitude tracking based on line correspondence are discussed.

  7. A development of deburring system using vision sensor

    International Nuclear Information System (INIS)

    Bae, Joon Young; Joo, Youn Myung; Kim, Joon Up; Lee, Sang Ryong

    2002-01-01

    Burr is a projected part of finished workpiece. It is unavoidable and undesirable by-product of most metal cutting or shearing process. Also, it must be removed to improve the fit of machined parts, safety of workers, and the effectiveness of finishing operation. But deburring process is one of manufacturing processes that have not been successfully automated, so deburring automation is strongly needed. This paper focused on developing a basic algorithm to find edge of workpiece and match two different image data for deburring automation which includes automatic recognition of parts, generation of deburring tool paths and edge/corner finding ability by analyzing the DXF drawing file which contains information of part geometry. As an algorithm for corner finding, SUSAN method was chosen. It makes good performance in finding edge and corner in suitable time. And this paper suggested a simple algorithm to find matching point between CCD image and drawing file

  8. Development of Probabilistic Structural Analysis Integrated with Manufacturing Processes

    Science.gov (United States)

    Pai, Shantaram S.; Nagpal, Vinod K.

    2007-01-01

    An effort has been initiated to integrate manufacturing process simulations with probabilistic structural analyses in order to capture the important impacts of manufacturing uncertainties on component stress levels and life. Two physics-based manufacturing process models (one for powdered metal forging and the other for annular deformation resistance welding) have been linked to the NESSUS structural analysis code. This paper describes the methodology developed to perform this integration including several examples. Although this effort is still underway, particularly for full integration of a probabilistic analysis, the progress to date has been encouraging and a software interface that implements the methodology has been developed. The purpose of this paper is to report this preliminary development.

  9. Integration of Manufacturing and Development in Emerging Markets

    DEFF Research Database (Denmark)

    Søberg, Peder Veng; Wæhrens, Brian Vejrum

    2014-01-01

    The chapter investigates the problems related to the functional integration between manufacturing activities and research and development (R&D) activities in emerging markets within multinational companies. A framework to this end is developed and illustrated through four case studies from...... as an integral part of corporate relocation decisions....

  10. Critical success factors model developing for sustainable Kaizen implementation in manufactur-ing industry in Ethiopia

    OpenAIRE

    Haftu Hailu; Abdelkadir Kedir; Getachew Bassa; Kassu Jilcha

    2017-01-01

    The purpose of the research is to identify critical success factors and model developing for sustaining kaizen implementation. Peacock shoe is one of the manufacturing industries in Ethiopia facing challenges on sustaining. The methodology followed is factor analysis and empirically testing hypothesis. A database was designed using SPSS version 20. The survey was validated using statistical validation using the Cronbach alpha index; the result is 0.908. The KMO index value was obtained for th...

  11. The development of clean-burning, noncatalytic manufactured fireplaces

    International Nuclear Information System (INIS)

    Broome, F.H.

    1992-01-01

    Concern for the air quality of this country in general and the Western states in particular has brought sharp focus from regulators on the emissions of Particulate Matter (PM) from all wood-burning appliances. This concern was a driving force which led to the development of a clean-burning fireplace. Many Western areas have begun to limit installation of wood-burning appliances in new construction. Some jurisdictions allow only Environmental Protection Agency (EPA) certified appliances. Currently no federal test methods or standards exist for fireplaces so the Manufactured Fireplace Industry, through the Hearth Products Association (HPA), set about to develop suitable test methods and standards for manufactured fireplaces

  12. Does Electricity Drive the Development of Manufacturing Sector in Malaysia?

    Energy Technology Data Exchange (ETDEWEB)

    Husaini, Dzul Hadzwan [Faculty of Economics and Business, Universiti Malaysia Sarawak, Sarawak (Malaysia); Lean, Hooi Hooi, E-mail: hooilean@usm.my [Economics Program, School of Social Sciences, Universiti Sains Malaysia, Penang (Malaysia)

    2015-04-22

    This paper investigates the relationship between electricity consumption, output, and price in the manufacturing sector in Malaysia. We find that electricity consumption, output, and price are cointegrated in the long run. In addition, it has been found that the relationship between electricity consumption and output is positive. In the long run, we find a unidirectional causality from manufacturing output to electricity consumption. This result indicates that the development of manufacturing sector stimulates greater demand for electricity. Government needs to make sure that the planning of electricity supply in the future is in line with the economic development planning to avoid shortage in electricity supply. In the short run, a unidirectional relationship runs from electricity consumption to output is found. A decrease of energy usage in production might reduce the output growth in short run. Hence, we suggest improving the efficiency of electricity usage and some cost-effective sources of energy.

  13. Does Electricity Drive the Development of Manufacturing Sector in Malaysia?

    International Nuclear Information System (INIS)

    Husaini, Dzul Hadzwan; Lean, Hooi Hooi

    2015-01-01

    This paper investigates the relationship between electricity consumption, output, and price in the manufacturing sector in Malaysia. We find that electricity consumption, output, and price are cointegrated in the long run. In addition, it has been found that the relationship between electricity consumption and output is positive. In the long run, we find a unidirectional causality from manufacturing output to electricity consumption. This result indicates that the development of manufacturing sector stimulates greater demand for electricity. Government needs to make sure that the planning of electricity supply in the future is in line with the economic development planning to avoid shortage in electricity supply. In the short run, a unidirectional relationship runs from electricity consumption to output is found. A decrease of energy usage in production might reduce the output growth in short run. Hence, we suggest improving the efficiency of electricity usage and some cost-effective sources of energy.

  14. Nigeria's vision 20:2020: the challenge of infrastructural development

    African Journals Online (AJOL)

    Vision 20:2020 represents an aspiration for Nigeria to have a large, strong, diversified, competitive and technologically enabled economy that effectively harnesses the talents and energy of its people and responsibly exploits its natural endowments to guarantee a high standard of living and quality of life for its citizens.

  15. Recent advances in fuel product and manufacturing process development

    International Nuclear Information System (INIS)

    Slember, R.J.; Doshi, P.K.

    1987-01-01

    This paper discusses advancements in commercial nuclear fuel products and manufacturing made by the Westinghouse Electric Corporation in response to the commercial nuclear fuel industry's demand for high reliability, increased plant availability and improved operating flexibility. The features and benefits of Westinghouse's most advanced fuel products--VANTAGE 5 for PWR plants and QUAD+ for BWR plants--are described, as well as 'high performance' fuel concepts now under development for delivery in the late 1980s. The paper also disusses the importance of in-process quality control throughout manufacturing towards reducing product variability and improving fuel reliability. (author)

  16. Recent developments in the economic modeling of photovoltaic module manufacturing

    Science.gov (United States)

    Chamberlain, R. G.

    1979-01-01

    Recent developments in the solar array manufacturing industry costing standards (SAMICS) are described. Consideration is given to the added capability to handle arbitrary operating schedules and the revised procedure for calculation of one-time costs. The results of an extensive validation study are summarized.

  17. Development and Manufacture of Polymer-based Electrochromic Devices

    DEFF Research Database (Denmark)

    Jensen, Jacob; Hösel, Markus; Dyer, Aubrey L.

    2015-01-01

    -to-roll methods compatible with upscaling and manufacture. The successful approaches to operational devices are presented in detail, as well as areas where future research would have a high impact and accelerate the development such as highly conducting and transparent substrates, electrolytes adapted...

  18. Place of Manufacture Diversification in Cyclical Development of the Enterprise

    Science.gov (United States)

    Erofeev, Alexander G.; Smolin, Georgy K.

    2016-01-01

    The relevance of the researched problem is caused by the fact that diversification is one of the best options for reforming enterprises. The aim of the research: to consider changes in production of outputs in development cycles of the enterprise. This will help to reveal the nature of manufacture diversification. The leading method to the…

  19. Technology transfer and international development: Materials and manufacturing technology

    Science.gov (United States)

    1982-01-01

    Policy oriented studies on technological development in several relatively advanced developing countries were conducted. Priority sectors defined in terms of technological sophistication, capital intensity, value added, and export potential were studied in Brazil, Venezuela, Israel, and Korea. The development of technological policy alternatives for the sponsoring country is assessed. Much emphasis is placed on understanding the dynamics of the sectors through structured interviews with a large sample of firms in the leading manufacturing and materials processing sectors.

  20. Development of granular powder manufacturing technology by spray pyrolysis

    International Nuclear Information System (INIS)

    Katoh, Yoshiyuki; Kawase, Keiichi; Takahashi, Yoshiharu; Todokoro, Akio

    1996-01-01

    For shortening of mixed-oxide (MOX) fuel manufacturing process and improvement in treatment of MOX-powder, we have been developing the granular powder production technology. Since the granular powders have excellent fluidity owing to the spherical shape, there is the possibility of modifying scattering and adcering of the powder in the process equipment. In this paper, spray pyrolysis process in adopted as the process of manufacturing the granular powders and the basic feasibility study has been carried out. The experimental results show that the manufactured granular powders have excellent fluidity and the diameter of the powders is controllable. Furthermore, high density pellets are formed by sintering the powders. Thus, it is clarified that this process is promising for the actual MOX fuel fabrication. (author)

  1. Phase 1 Development Testing of the Advanced Manufacturing Demonstrator Engine

    Science.gov (United States)

    Case, Nicholas L.; Eddleman, David E.; Calvert, Marty R.; Bullard, David B.; Martin, Michael A.; Wall, Thomas R.

    2016-01-01

    The Additive Manufacturing Development Breadboard Engine (BBE) is a pressure-fed liquid oxygen/pump-fed liquid hydrogen (LOX/LH2) expander cycle engine that was built and operated by NASA at Marshall Space Flight Center's East Test Area. The breadboard engine was conceived as a technology demonstrator for the additive manufacturing technologies for an advanced upper stage prototype engine. The components tested on the breadboard engine included an ablative chamber, injector, main fuel valve, turbine bypass valve, a main oxidizer valve, a mixer and the fuel turbopump. All parts minus the ablative chamber were additively manufactured. The BBE was successfully hot fire tested seven times. Data collected from the test series will be used for follow on demonstration tests with a liquid oxygen turbopump and a regeneratively cooled chamber and nozzle.

  2. Reservoir Maintenance and Development Task Report for the DOE Geothermal Technologies Office GeoVision Study.

    Energy Technology Data Exchange (ETDEWEB)

    Lowry, Thomas Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Finger, John T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Carrigan, Charles R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Foris, Adam [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kennedy, Mack B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Corbet, Thomas F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Doughty, Christine A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Pye, Steven [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sonnenthal, Eric L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-09-01

    This report documents the key findings from the Reservoir Maintenance and Development (RM&D) Task of the U.S. Department of Energy's (DOE), Geothermal Technologies Office (GTO) Geothermal Vision Study (GeoVision Study). The GeoVision Study had the objective of conducting analyses of future geothermal growth based on sets of current and future geothermal technology developments. The RM&D Task is one of seven tasks within the GeoVision Study with the others being, Exploration and Confirmation, Potential to Penetration, Institutional Market Barriers, Environmental and Social Impacts, Thermal Applications, and Hybrid Systems. The full set of findings and the details of the GeoVision Study can be found in the final GeoVision Study report on the DOE-GTO website. As applied here, RM&D refers to the activities associated with developing, exploiting, and maintaining a known geothermal resource. It assumes that the site has already been vetted and that the resource has been evaluated to be of sufficient quality to move towards full-scale development. It also assumes that the resource is to be developed for power generation, as opposed to low-temperature or direct use applications. This document presents the key factors influencing RM&D from both a technological and operational standpoint and provides a baseline of its current state. It also looks forward to describe areas of research and development that must be pursued if the development geothermal energy is to reach its full potential.

  3. Development of High Temperature Capacitor Technology and Manufacturing Capability

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2011-05-15

    The goal of the Development of High Temperature Capacitor Technology and Manufacturing Capability program was to mature a production-ready supply chain for reliable 250°C FPE (fluorinated polyester) film capacitors by 2011. These high-temperature film capacitors enable both the down hole drilling and aerospace industries by enabling a variety of benefits including: - Deeper oil exploration in higher temperature and pressure environments - Enabling power electronic and control equipment to operate in higher temperature environments - Enabling reduced cooling requirements of electronics - Increasing reliability and life of capacitors operating below rated temperature - Enabling capacitors to handle higher electrical losses without overheating. The key challenges to bringing the FPE film capacitors to market have been manufacturing challenges including: - FPE Film is difficult to handle and wind, resulting in poor yields - Voltage breakdown strength decreases when the film is wound into capacitors (~70% decrease) - Encapsulation technologies must be improved to enable higher perature operation - Manufacturing and test cycle time is very long As a direct result of this program most of the manufacturing challenges have been met. The FPE film production metalization and winding yield has increased to over 82% from 70%, and the voltage breakdown strength of the wound capacitors has increased 270% to 189 V/μm. The high temperature packaging concepts are showing significant progress including promising results for lead attachments and hermetic packages at 200°C and non-hermetic packages at 250°C. Manufacturing and test cycle time will decrease as the market for FPE capacitors develops.

  4. Comparability of the performance of in-line computer vision for geometrical verification of parts, produced by Additive Manufacturing

    DEFF Research Database (Denmark)

    Pedersen, David B.; Hansen, Hans N.

    2014-01-01

    The field of Additive Manufacturing is growing at an accelerated rate, as prototyping is left in favor of direct manufacturing of components for the industry and consumer. A consequence of masscustomization and component complexity is an adverse geometrical verification challenge. Mass...

  5. Development of an ergonomics guideline for the furniture manufacturing industry.

    Science.gov (United States)

    Mirka, Gary A

    2005-03-01

    Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

  6. Manufacturing Development of the NCSX Modular Coil Windings

    International Nuclear Information System (INIS)

    Chrzanowski, JH; Fogarty, PJ; Heitzenroeder, PJ; Meighan, T.; Nelson, B.; Raftopoulos, S.; Williamson, D.

    2005-01-01

    The modular coils on the National Compact Stellarator Experiment (NCSX) present a number of significant engineering challenges due to their complex shapes, requirements for high dimensional accuracy and the high current density required in the modular coils due to space constraints. In order to address these challenges, an R and D program was established to develop the conductor, insulation scheme, manufacturing techniques, and procedures. A prototype winding named Twisted Racetrack Coil (TRC) was of particular importance in dealing with these challenges. The TRC included a complex shaped winding form, conductor, insulation scheme, leads and termination, cooling system and coil clamps typical of the modular coil design. Even though the TRC is smaller in size than a modular coil, its similar complex geometry provided invaluable information in developing the final design, metrology techniques and development of manufacturing procedures. In addition a discussion of the development of the copper rope conductor including ''Keystoning'' concerns; the epoxy impregnation system (VPI) plus the tooling and equipment required to manufacture the modular coils will be presented

  7. Development of Vision System for Dimensional Measurement for Irradiated Fuel Assembly

    International Nuclear Information System (INIS)

    Shin, Jungcheol; Kwon, Yongbock; Park, Jongyoul; Woo, Sangkyun; Kim, Yonghwan; Jang, Youngki; Choi, Joonhyung; Lee, Kyuseog

    2006-01-01

    In order to develop an advanced nuclear fuel, a series of pool side examination (PSE) is performed to confirm in-pile behavior of the fuel for commercial production. For this purpose, a vision system was developed to measure for mechanical integrity, such as assembly bowing, twist and growth, of the loaded lead test assembly. Using this vision system, three(3) times of PSE were carried out at Uljin Unit 3 and Kori Unit 2 for the advanced fuels, PLUS7 TM and 16ACE7 TM , developed by KNFC. Among the main characteristics of the vision system is very simple structure and measuring principal. This feature enables the equipment installation and inspection time to reduce largely, and leads the PSE can be finished without disturbance on the fuel loading and unloading activities during utility overhaul periods. And another feature is high accuracy and repeatability achieved by this vision system

  8. Critical success factors model developing for sustainable Kaizen implementation in manufactur-ing industry in Ethiopia

    Directory of Open Access Journals (Sweden)

    Haftu Hailu

    2017-12-01

    Full Text Available The purpose of the research is to identify critical success factors and model developing for sustaining kaizen implementation. Peacock shoe is one of the manufacturing industries in Ethiopia facing challenges on sustaining. The methodology followed is factor analysis and empirically testing hypothesis. A database was designed using SPSS version 20. The survey was validated using statistical validation using the Cronbach alpha index; the result is 0.908. The KMO index value was obtained for the 32 items and had a value of 0.642 with Bartlett's Test of Sphericity Approx. Chi-Square 4503.007, degree of freedom 496 and significance value 0.000. A factor analysis by principal components and varimax rotation was applied for finding the critical success factors. Finding designates that 32 items were merged into eight critical success factors. All the eight factors together explain for 76.941 % of the variance. Multiple regression model analysis has indicated that some of the critical success factors had relationship with success indicators. Due to constraint of time, the researcher focused only at peacock shoe manufacturing industry. Other limitation also includes the absence of any local research that shows the critical success factors at the moment.

  9. Buildings of the Future Scoping Study: A Framework for Vision Development

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Na [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Goins, John D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-02-01

    The Buildings of the Future Scoping Study, funded by the U.S. Department of Energy (DOE) Building Technologies Office, seeks to develop a vision for what U.S. mainstream commercial and residential buildings could become in 100 years. This effort is not intended to predict the future or develop a specific building design solution. Rather, it will explore future building attributes and offer possible pathways of future development. Whether we achieve a more sustainable built environment depends not just on technologies themselves, but on how effectively we envision the future and integrate these technologies in a balanced way that generates economic, social, and environmental value. A clear, compelling vision of future buildings will attract the right strategies, inspire innovation, and motivate action. This project will create a cross-disciplinary forum of thought leaders to share their views. The collective views will be integrated into a future building vision and published in September 2015. This report presents a research framework for the vision development effort based on a literature survey and gap analysis. This document has four objectives. First, it defines the project scope. Next, it identifies gaps in the existing visions and goals for buildings and discusses the possible reasons why some visions did not work out as hoped. Third, it proposes a framework to address those gaps in the vision development. Finally, it presents a plan for a series of panel discussions and interviews to explore a vision that mitigates problems with past building paradigms while addressing key areas that will affect buildings going forward.

  10. Progress in the clinical development and utilization of vision prostheses: an update

    Directory of Open Access Journals (Sweden)

    Brandli A

    2016-05-01

    Full Text Available Alice Brandli, Chi D Luu, Robyn H Guymer, Lauren N Ayton Centre for Eye Research Australia, Department of Surgery (Ophthalmology, The University of Melbourne, Royal Victorian Eye and Ear Hospital, Melbourne, VIC, Australia Abstract: Vision prostheses, or “bionic eyes”, are implantable medical bionic devices with the potential to restore rudimentary sight to people with profound vision loss or blindness. In the past two decades, this field has rapidly progressed, and there are now two commercially available retinal prostheses in the US and Europe, and a number of next-generation devices in development. This review provides an update on the development of these devices and a discussion on the future directions for the field. Keywords: vision prostheses, bionic eye, vision restoration, blindness, medical bionics, retinitis pigmentosa

  11. Development and validation of resource flexibility measures for manufacturing industry

    Directory of Open Access Journals (Sweden)

    Gulshan Chauhan

    2014-01-01

    Full Text Available Purpose: Global competition and ever changing customers demand have made manufacturing organizations to rapidly adjust to complexities, uncertainties, and changes. Therefore, flexibility in manufacturing resources is necessary to respond cost effectively and rapidly to changing production needs and requirements.  Ability of manufacturing resources to dynamically reallocate from one stage of a production process to another in response to shifting bottlenecks is recognized as resource flexibility. This paper aims to develop and validate resource flexibility measures for manufacturing industry that could be used by managers/ practitioners in assessing and improving the status of resource flexibility for the optimum utilization of resources. Design/methodology/approach: The study involves survey carried out in Indian manufacturing industry using a questionnaire to assess the status of various aspects of resource flexibility and their relationships. A questionnaire was specially designed covering various parameters of resource flexibility. Its reliability was checked by finding the value of Cronback alpha (0.8417. Relative weightage of various measures was found out by using Analytical Hierarchy Process (AHP. Pearson’s coefficient of correlation analysis was carried out to find out relationships between various parameters. Findings: From detailed review of literature on resource flexibility, 17 measures of resource flexibility and 47 variables were identified. The questionnaire included questions on all these measures and parameters. ‘Ability of machines to perform diverse set of operations’ and ability of workers to work on different machines’ emerged to be important measures with contributing weightage of 20.19% and 17.58% respectively.  All the measures were found to be significantly correlated with overall resource flexibility except ‘training of workers’, as shown by Pearson’s coefficient of correlation. This indicates that

  12. 77 FR 69634 - International Conference on Harmonisation; Guidance on Q11 Development and Manufacture of Drug...

    Science.gov (United States)

    2012-11-20

    ...] International Conference on Harmonisation; Guidance on Q11 Development and Manufacture of Drug Substances... Administration (FDA) is announcing the availability of a guidance entitled ``Q11 Development and Manufacture of... guidance is intended to apply only to the manufacture of drug substance, not the manufacture of finished...

  13. Development of a virtual manufacturing assembly simulation system

    Directory of Open Access Journals (Sweden)

    Abdulrahman M Al-Ahmari

    2016-03-01

    Full Text Available Assembly operations are a key component of modern manufacturing systems. Designing, planning, and conducting assembly operations represent an important part of the cost of a product. Virtual reality provides an efficient and cost-effective solution to manufacturing design, planning, and prototyping. Still there are certain issues (such as data translation, integration of various hardware and software systems, and real-time collision detection faced while applying this advanced technology to the assembly domain. For example, existing works focus on using virtual reality systems and environments mainly to design new products and to plan for assembly. Little focus has been given to develop virtual reality environments that contribute to train operators on assembly operations and to bridge the gap between design and implementation/execution of assembly. Therefore, the research work presented in this article focuses on developing a fully functional virtual manufacturing assembly simulation system that solves the issues related to virtual reality environments. The proposed system uses a virtual environment to create an interactive workbench that can be used for evaluating assembly decisions and training assembly operations. It is a comprehensive system that provides visual, auditory, tactile, as well as force feedback. The system works successfully even with large components.

  14. Development of embedded real-time and high-speed vision platform

    Science.gov (United States)

    Ouyang, Zhenxing; Dong, Yimin; Yang, Hua

    2015-12-01

    Currently, high-speed vision platforms are widely used in many applications, such as robotics and automation industry. However, a personal computer (PC) whose over-large size is not suitable and applicable in compact systems is an indispensable component for human-computer interaction in traditional high-speed vision platforms. Therefore, this paper develops an embedded real-time and high-speed vision platform, ER-HVP Vision which is able to work completely out of PC. In this new platform, an embedded CPU-based board is designed as substitution for PC and a DSP and FPGA board is developed for implementing image parallel algorithms in FPGA and image sequential algorithms in DSP. Hence, the capability of ER-HVP Vision with size of 320mm x 250mm x 87mm can be presented in more compact condition. Experimental results are also given to indicate that the real-time detection and counting of the moving target at a frame rate of 200 fps at 512 x 512 pixels under the operation of this newly developed vision platform are feasible.

  15. Trends in innovation activities in manufacturing industries across development echelons

    Directory of Open Access Journals (Sweden)

    Abdullah M. Khan

    2017-07-01

    Full Text Available This empirical paper explores trends in innovation activities measured by a countries’ total patent application submission intensity relative to its population, and by analyzing U.S. granted patents data for cohorts of developed countries and developing countries. In addition to tabular and graphical analyses, I use a baseline regression model and a variant model thereof to assess the relative influence of a set of aggregate variables on innovation activities in eight manufacturing industries across two cohorts of countries (developed and developing where each cohort contains eight individual countries. Eight industries included in this study are: Chemical, Petroleum, electrical and electronics equipment, machinery, pharmaceutical, plastic, computer, and textile. The cohort of developed countries includes Australia, Canada, Czech Republic, France, Italy, Poland, Switzerland, and the United States. The cohort of developing countries includes Brazil, China, India, Malaysia, Mexico, Russia, South Africa, and Turkey. Per regression results, ethnic diversity is a statistically significant positive determinant of innovation for all industry aggregate patent count for both high income and developing countries. Also, per capita electricity usage, R&D expenditure as percent of GDP, and percent of population with internet access are three positive factors of innovation irrespective of industrial subsectors and position of a country in the development echelon. Interestingly, impact of ICT-services export is statistically significant and innovation boosting in developing countries in the cohort relative to countries in the cohort of developed countries. It also appears that trade openness served as a stronger stimulant of innovation activities for developing countries’ but not as much for the cohort of developed or high-income countries. This paper attempts to extend the literature on cross-country comparison of innovation activities by using two

  16. Toward Vision Oriented Organization through Foresight Capability Development

    Directory of Open Access Journals (Sweden)

    Gianita BLEOJU

    2014-11-01

    Full Text Available Dealing with complexity is becoming increasingly difficult for organizations, due to limited replicable abilities, once management performance was remunerated by successful decisions on the marketplace. The competitive advantage, based upon current documented organizational management expertise, deployed into patterns of competitive behavior, prove to be unsustainable. Therefore, we assist to a relative emergency of strategic intelligence adjustment framework, to channel the managerial capability mechanisms, from current detective orientation capabilities toward anticipatory ones. Based upon exploitation of an organizational profiling database, we try our contribution to this challenging debate, by formulating recommendations for strategic adjustment and prototype testing of the potential solutions, through a designed transition matrix from market oriented to vision oriented organizations.

  17. A methodology for developing anisotropic AAA phantoms via additive manufacturing.

    Science.gov (United States)

    Ruiz de Galarreta, Sergio; Antón, Raúl; Cazón, Aitor; Finol, Ender A

    2017-05-24

    An Abdominal Aortic Aneurysm (AAA) is a permanent focal dilatation of the abdominal aorta at least 1.5 times its normal diameter. The criterion of maximum diameter is still used in clinical practice, although numerical studies have demonstrated the importance of biomechanical factors for rupture risk assessment. AAA phantoms could be used for experimental validation of the numerical studies and for pre-intervention testing of endovascular grafts. We have applied multi-material 3D printing technology to manufacture idealized AAA phantoms with anisotropic mechanical behavior. Different composites were fabricated and the phantom specimens were characterized by biaxial tensile tests while using a constitutive model to fit the experimental data. One composite was chosen to manufacture the phantom based on having the same mechanical properties as those reported in the literature for human AAA tissue; the strain energy and anisotropic index were compared to make this choice. The materials for the matrix and fibers of the selected composite are, respectively, the digital materials FLX9940 and FLX9960 developed by Stratasys. The fiber proportion for the composite is equal to 0.15. The differences between the composite behavior and the AAA tissue are small, with a small difference in the strain energy (0.4%) and a maximum difference of 12.4% in the peak Green strain ratio. This work represents a step forward in the application of 3D printing technology for the manufacturing of AAA phantoms with anisotropic mechanical behavior. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Strategies for Designing and Developing Services for Manufacturing Firms

    DEFF Research Database (Denmark)

    Tan, Adrian; Matzen, Detlef; McAloone, Tim C.

    2009-01-01

    Product/service-systems (PSS) are in effect an approach to designing integrated products and services with a focus on both customer activities and product life cycle considerations. Literature offers a range of serviceoriented design strategies from product-oriented DfX approaches to more customer......-oriented approaches such as integrated solutions and service design. These design strategies are mapped out in relation to how applicable they are to different types of services. Case studies from two industrial companies are used to confront the existing literature in order to begin to understand how manufacturing...... companies may align their business strategies with their product and service development activities....

  19. Strategies for Designing and Developing Services for Manufacturing Firms

    DEFF Research Database (Denmark)

    Tan, Adrian Ronald; Matzen, Detlef; McAloone, Tim C.

    2010-01-01

    Product/service-systems (PSS) are in effect an approach to designing integrated products and services with a focus on both customer- and product life cycleactivities . Literature offers a range of service-oriented design strategies from product-oriented DfX approaches to more customer...... manufacturing companies may align their product and service development activities with their business strategies.......-oriented approaches such as integrated solutions and service design. These design strategies are mapped out in relation to how applicable they are to different types of services. Case studies from two industrial companies are used to confront the existing literature in order to improve understanding of how...

  20. New developments in coordinate measuring machines for manufacturing industries

    Directory of Open Access Journals (Sweden)

    Hammad Mian S.

    2014-01-01

    Full Text Available There have been substantial improvements in measurement systems in order to meet fluctuating market demands. This rapid change and development in measurement technology has primarily been governed by demands of accuracy and precision from aerospace, automotive and other manufacturing industries. Coordinate measuring machines (CMMs available with different technologies and configurations has efficiently been fulfilling customer demands for more than a decade. Though, current CMMs can meet needs of rapid and increased demands of customers to a greater extent but still there is lot of scope for improvement and development in CMMs. The globalization of manufacturing has resulted in development of variety of complex products and miniaturization of mechanical components. The technology of micro/nano-scale 3D measurement is still a bottleneck for industries. Therefore, precise and accurate system which is flexible enough to deal with complexities of parts and micro & nano range products has to be investigated. In this paper, comprehensive review concerning CMMs with capabilities to measure micro/nano features has been presented. This work has also discussed different methods to estimate measurement uncertainty, as well as performance evaluation of CMMs. Moreover, novel concepts such as intelligent CMM, multi-sensor CMM, virtual CMM have been presented.

  1. The development of an instrument to measure quality of vision: the Quality of Vision (QoV) questionnaire.

    Science.gov (United States)

    McAlinden, Colm; Pesudovs, Konrad; Moore, Jonathan E

    2010-11-01

    To develop an instrument to measure subjective quality of vision: the Quality of Vision (QoV) questionnaire. A 30-item instrument was designed with 10 symptoms rated in each of three scales (frequency, severity, and bothersome). The QoV was completed by 900 subjects in groups of spectacle wearers, contact lens wearers, and those having had laser refractive surgery, intraocular refractive surgery, or eye disease and investigated with Rasch analysis and traditional statistics. Validity and reliability were assessed by Rasch fit statistics, principal components analysis (PCA), person separation, differential item functioning (DIF), item targeting, construct validity (correlation with visual acuity, contrast sensitivity, total root mean square [RMS] higher order aberrations [HOA]), and test-retest reliability (two-way random intraclass correlation coefficients [ICC] and 95% repeatability coefficients [R(c)]). Rasch analysis demonstrated good precision, reliability, and internal consistency for all three scales (mean square infit and outfit within 0.81-1.27; PCA >60% variance explained by the principal component; person separation 2.08, 2.10, and 2.01 respectively; and minimal DIF). Construct validity was indicated by strong correlations with visual acuity, contrast sensitivity and RMS HOA. Test-retest reliability was evidenced by a minimum ICC of 0.867 and a minimum 95% R(c) of 1.55 units. The QoV Questionnaire consists of a Rasch-tested, linear-scaled, 30-item instrument on three scales providing a QoV score in terms of symptom frequency, severity, and bothersome. It is suitable for measuring QoV in patients with all types of refractive correction, eye surgery, and eye disease that cause QoV problems.

  2. Vision-based obstacle recognition system for automated lawn mower robot development

    Science.gov (United States)

    Mohd Zin, Zalhan; Ibrahim, Ratnawati

    2011-06-01

    Digital image processing techniques (DIP) have been widely used in various types of application recently. Classification and recognition of a specific object using vision system require some challenging tasks in the field of image processing and artificial intelligence. The ability and efficiency of vision system to capture and process the images is very important for any intelligent system such as autonomous robot. This paper gives attention to the development of a vision system that could contribute to the development of an automated vision based lawn mower robot. The works involve on the implementation of DIP techniques to detect and recognize three different types of obstacles that usually exist on a football field. The focus was given on the study on different types and sizes of obstacles, the development of vision based obstacle recognition system and the evaluation of the system's performance. Image processing techniques such as image filtering, segmentation, enhancement and edge detection have been applied in the system. The results have shown that the developed system is able to detect and recognize various types of obstacles on a football field with recognition rate of more 80%.

  3. Development of manufacturing equipment and QC equipment for DUPIC fuel

    International Nuclear Information System (INIS)

    Yang, Myung Seung; Park, J.J.; Lee, J.W.; Kim, S.S.; Yim, S.P.; Kim, J.H.; Kim, K.H.; Na, S.H.; Kim, W.K.; Shin, J.M.; Lee, D.Y.; Cho, K.H.; Lee, Y.S.; Sohn, J.S.; Kim, M.J.

    1999-05-01

    In this study, DUPIC powder and pellet fabrication equipment, welding system, QC equipment, and fission gas treatment are developed to fabricate DUPIC fuel at IMEF M6 hot cell. The systems are improved to be suitable for remote operation and maintenance with the manipulator at hot cell. Powder and pellet fabrication equipment have been recently developed. The systems are under performance test to check remote operation and maintenance. Welding chamber and jigs are designed and developed to remotely weld DUPIC fuel rod with manipulators at hot cell. Remote quality control equipment are being tested for analysis and inspection of DUPIC fuel characteristics at hot cell. And trapping characteristics is analyzed for cesium and ruthenium released under oxidation/reduction and sintering processes. The design criteria and process flow diagram of fission gas treatment system are prepared incorporating the experimental results. The fission gas treatment system has been successfully manufactured. (Author). 33 refs., 14 tabs., 91 figs

  4. Using Additive Manufacturing to Reduce the Cost of Instrument Development

    Data.gov (United States)

    National Aeronautics and Space Administration — Additive Manufacturing (AM), commonly known as 3D printing, is widely used in the commercial sector for the manufacture of consumer goods, high performance parts for...

  5. The development of zirconium alloy and its manufacturing

    International Nuclear Information System (INIS)

    Yuan Gaihuan; Yue Qiang

    2015-01-01

    Nuclear power which acts as one of low-carbon energy resources is the most realistic in large-scale application. It is also the preferred choice for many countries to develop energy resources and optimize its structure. Zirconium alloy is a key structural material for nuclear power plant fuel assemblies and cladding tubes of zirconium alloy are often referred as the first safeguard to nuclear power safety. With the development of nuclear power, three kinds of zirconium alloys Zr-Sn, Zr-Nb, Zr-Sn-Nb and with the representative products of Zr-4, M5, Zirlo respectively are developed and widely applied. Because of its severe operating environment and influence to nuclear safety, the requirements to zirconium alloys for physical and chemical properties, nuclear capability, tolerance and surface quality are very strict. The in-depth research and its manufacture capability become one of the main barriers for many countries who are developing the nuclear energy. In recent years, a stated-owned company, State Nuclear Bao Ti Zirconium Industry Company ('SNZ' for short) as well as National R and D Center for Nuclear Grade Zirconium material, is founded to meet the requirement of the rapid development of China's nuclear power industry. SNZ is dedicated for the fabrication and the research of nuclear grade zirconium products. After the successful completion of technology transfer of manufacturing for production chain and fully grasped of the manufacturing technology for the nuclear grade zirconium sponge through zirconium alloy tube, rod and strip products. National R and D Center for Nuclear Grade Zirconium material is cooperating with universities, nuclear energy research and design institutes and the owners of nuclear power plant to develop new zirconium alloy of self-owned brand. Through the selection of components, in-process testing and product inspection, four kinds of new zirconium alloys owns better performance than currently commercialized M5, Zirlo etc

  6. Development of manufacturing technology for ITER TF Coil Structure

    Energy Technology Data Exchange (ETDEWEB)

    Sakurai, Takeru, E-mail: sakurai.takeru@jaea.go.jp; Iguchi, Masahide; Nakahira, Masataka; Inagaki, Takashi; Matsui, Kunihiro; Koizumi, Norikiyo

    2016-11-01

    Highlights: • Heavy thick welding (Max. 287 mm) was performed by balance welding. • Figured out Attachment welding deformation including heavy thick welding. • The deformation of Segments welding was suppressed to 1/3 of previous method. • Based on this study, JAEA started actual ITER TF coil structure manufacturing. - Abstract: Japan Atomic Energy Agency (JAEA) performed a trial of A1 Segment manufacturing of Toroidal Field (TF) coil structure, which is a piece with a radius of curvature 3 m with square channel for coil. Even though both-side welding (balance welding) was preferred to one-side welding considering the welding deformation, it could not be applied to the previous trial due to the difficulty of overhead or horizontal welding by machine. Hence, one-side welding with strong restriction jig was applied in the previous trials. In the latest trial, JAEA adopted a manual balance welding with a development of manufacturing technology. As the result of A1 Segment Mainbody welding trial, welding deformation of the Outer Plate and the Side Plate could have been controlled closer to the target value. JAEA also tried Attachments welding, in which Pre-Compression Flange (PCF) and Extension are welded to A1 Segment Mainbody, and a Segments welding trial, which is a weld between A1 Segment and a part of A2 Segment. A2 Segment is a 3 m straight part with square channel for coil. The inclination of A1 Segment and A2 Segment due to the welding was 2.7 mm. By applying balance welding, the deformation by Segments welding was suppressed to about 1/3 of the one-side welding. The views and opinions expressed herein do not necessarily reflect those of the ITER Organization.

  7. A product-process approach for development of the manufacturing footprint

    DEFF Research Database (Denmark)

    Farooq, Sami; Yang, Cheng; Johansen, John

    2009-01-01

    to ever changing global business environment there are certain other external factors that act as drivers for the manufacturing facility development process and therefore should be given considerable importance as they play a major role in defining the future footprint of a manufacturing organisation....... elaborating the development and establishment of various manufacturing facilities of a Danish pump manufacturer is then described. The discussion from the case leads to the conclusion that developing new manufacturing facilities can be explained using existing theories of manufacturing strategy. However due...

  8. U.S. Offshore Wind Manufacturing and Supply Chain Development

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, Bruce Duncan [Navigant Consulting, Inc.

    2013-02-22

    The objective of the report is to provide an assessment of the domestic supply chain and manufacturing infrastructure supporting the U.S. offshore wind market. The report provides baseline information and develops a strategy for future development of the supply chain required to support projected offshore wind deployment levels. A brief description of each of the key chapters includes: » Chapter 1: Offshore Wind Plant Costs and Anticipated Technology Advancements. Determines the cost breakdown of offshore wind plants and identifies technical trends and anticipated advancements in offshore wind manufacturing and construction. » Chapter 2: Potential Supply Chain Requirements and Opportunities. Provides an organized, analytical approach to identifying and bounding the uncertainties associated with a future U.S. offshore wind market. It projects potential component-level supply chain needs under three demand scenarios and identifies key supply chain challenges and opportunities facing the future U.S. market as well as current suppliers of the nation’s land-based wind market. » Chapter 3: Strategy for Future Development. Evaluates the gap or competitive advantage of adding manufacturing capacity in the U.S. vs. overseas, and evaluates examples of policies that have been successful . » Chapter 4: Pathways for Market Entry. Identifies technical and business pathways for market entry by potential suppliers of large-scale offshore turbine components and technical services. The report is intended for use by the following industry stakeholder groups: (a) Industry participants who seek baseline cost and supplier information for key component segments and the overall U.S. offshore wind market (Chapters 1 and 2). The component-level requirements and opportunities presented in Section 2.3 will be particularly useful in identifying market sizes, competition, and risks for the various component segments. (b) Federal, state, and local policymakers and economic development

  9. Screening for depression: integrating training into the professional development programme for low vision rehabilitation staff.

    Science.gov (United States)

    Rees, Gwyneth; Holloway, Edith E; Craig, Graeme; Hepi, Niky; Coad, Samantha; Keeffe, Jill E; Lamoureux, Ecosse L

    2012-12-01

    To describe the integration of depression screening training into the professional development programme for low vision rehabilitation staff and report on staff evaluation of this training. Pre-post intervention study, in a single population of low vision rehabilitation staff. Three hundred and thirty-six staff from Australia's largest low vision rehabilitation organization, Vision Australia. Staff completed the depression screening and referral training as part of a wider professional development programme. A pre-post-training questionnaire was administered to all staff. Descriptive and non-parametric statistics were used to determine differences in self-reported knowledge, confidence, barriers to recognition and management of depression between baseline and post training. One hundred and seventy-two participants completed both questionnaires. Following training, participants reported an increased knowledge of depression, were more likely to respond to depression in their clients and reported to be more confident in managing depression (P training incorporating more active and 'hands-on' sessions are likely to be required. This training is a promising first step in integrating a depression screening tool into low vision rehabilitation practice. Further work is needed to determine the barriers and facilitators to implementation in practice and to assess clients' acceptability and outcomes. © 2012 The Authors. Clinical and Experimental Ophthalmology © 2012 Royal Australian and New Zealand College of Ophthalmologists.

  10. A Practical Solution Using A New Approach To Robot Vision

    Science.gov (United States)

    Hudson, David L.

    1984-01-01

    Up to now, robot vision systems have been designed to serve both application development and operational needs in inspection, assembly and material handling. This universal approach to robot vision is too costly for many practical applications. A new industrial vision system separates the function of application program development from on-line operation. A Vision Development System (VDS) is equipped with facilities designed to simplify and accelerate the application program development process. A complimentary but lower cost Target Application System (TASK) runs the application program developed with the VDS. This concept is presented in the context of an actual robot vision application that improves inspection and assembly for a manufacturer of electronic terminal keyboards. Applications developed with a VDS experience lower development cost when compared with conventional vision systems. Since the TASK processor is not burdened with development tools, it can be installed at a lower cost than comparable "universal" vision systems that are intended to be used for both development and on-line operation. The VDS/TASK approach opens more industrial applications to robot vision that previously were not practical because of the high cost of vision systems. Although robot vision is a new technology, it has been applied successfully to a variety of industrial needs in inspection, manufacturing, and material handling. New developments in robot vision technology are creating practical, cost effective solutions for a variety of industrial needs. A year or two ago, researchers and robot manufacturers interested in implementing a robot vision application could take one of two approaches. The first approach was to purchase all the necessary vision components from various sources. That meant buying an image processor from one company, a camera from another and lens and light sources from yet others. The user then had to assemble the pieces, and in most instances he had to write

  11. Atomic and close-to-atomic scale manufacturing—A trend in manufacturing development

    Science.gov (United States)

    Fang, Fengzhou

    2016-12-01

    Manufacturing is the foundation of a nation's economy. It is the primary industry to promote economic and social development. To accelerate and upgrade China's manufacturing sector from "precision manufacturing" to "high-performance and high-quality manufacturing", a new breakthrough should be found in terms of achieving a "leap-frog development". Unlike conventional manufacturing, the fundamental theory of "Manufacturing 3.0" is beyond the scope of conventional theory; rather, it is based on new principles and theories at the atomic and/or closeto- atomic scale. Obtaining a dominant role at the international level is a strategic move for China's progress.

  12. Development of Vision Control Scheme of Extended Kalman filtering for Robot's Position Control

    International Nuclear Information System (INIS)

    Jang, W. S.; Kim, K. S.; Park, S. I.; Kim, K. Y.

    2003-01-01

    It is very important to reduce the computational time in estimating the parameters of vision control algorithm for robot's position control in real time. Unfortunately, the batch estimation commonly used requires too murk computational time because it is iteration method. So, the batch estimation has difficulty for robot's position control in real time. On the other hand, the Extended Kalman Filtering(EKF) has many advantages to calculate the parameters of vision system in that it is a simple and efficient recursive procedures. Thus, this study is to develop the EKF algorithm for the robot's vision control in real time. The vision system model used in this study involves six parameters to account for the inner(orientation, focal length etc) and outer (the relative location between robot and camera) parameters of camera. Then, EKF has been first applied to estimate these parameters, and then with these estimated parameters, also to estimate the robot's joint angles used for robot's operation. finally, the practicality of vision control scheme based on the EKF has been experimentally verified by performing the robot's position control

  13. 76 FR 38187 - International Conference on Harmonisation; Draft Guidance on Q11 Development and Manufacture of...

    Science.gov (United States)

    2011-06-29

    ...] International Conference on Harmonisation; Draft Guidance on Q11 Development and Manufacture of Drug Substances... Manufacture of Drug Substances.'' The draft guidance was prepared under the auspices of the International... that a draft guidance entitled ``Q11 Development and Manufacture of Drug Substances'' should be made...

  14. Manufacturing development of the Westinghouse Nb3Sn coil for the Large Coil Test Program

    International Nuclear Information System (INIS)

    Young, J.L.; Vota, T.L.; Singh, S.K.

    1983-01-01

    The Westinghouse Nb 3 Sn Magnet for the Oak Ridge National Laboratory Large Coil Program (LCP) is currently well into the manufacturing phase. This paper identifies the manufacturing processes and development tasks for his unique, advanced coil

  15. Role of vision on early motor development : lessons from the blind

    NARCIS (Netherlands)

    Prechtl, HFR; Cioni, G; Einspieler, C; Bos, AF; Ferrari, F

    For a better understanding of the contribution vision makes to the development of other sensory systems and to movement and posture, we studied effects of early blindness by examining video recordings of 14 totally blind infants. Infants were born at term or preterm and showed no evidence of brain

  16. Developing the Vision: An L4L Job Description for the 21st Century

    Science.gov (United States)

    Ballard, Susan

    2009-01-01

    The release of AASL's "Standards for the 21st-Century Learner" and "Empowering Learners: Guidelines for School Library Media Programs" has provided school library media specialists with the opportunity to "develop new visions for learning" (AASL 2009), and to rethink what their roles are, and what skills and characteristics are required of them to…

  17. Reflections on the Development of a Machine Vision Technology for the Forest Products

    Science.gov (United States)

    Richard W. Conners; D.Earl Kline; Philip A. Araman; Robert L. Brisbon

    1992-01-01

    The authors have approximately 25 years experience in developing machine vision technology for the forest products industry. Based on this experience this paper will attempt to realistically predict what the future holds for this technology. In particular, this paper will attempt to describe some of the benefits this technology will offer, describe how the technology...

  18. Realising local government visions for developing district heating: Experiences from a learning country

    International Nuclear Information System (INIS)

    Bush, Ruth E.; Bale, Catherine S.E.; Taylor, Peter G.

    2016-01-01

    District heating (DH) has an important role to play in enabling cities to transition to low-carbon heating. Although schemes are commonplace in some countries, in ‘learning countries’ where building-level technologies make up the majority of heating systems there are numerous barriers to introducing DH. Local governments are seen as key actors in helping to create a ‘shared vision’ for DH amongst stakeholders. This study uses interviews with stakeholders from a range of sectors in the UK (an example of a learning country) to examine the visions of local actors for developing DH and the types of national policy that would support local implementation of these visions. The analysis shows that in engaging with DH development local governments seek multiple types of value. Realising this value will most likely happen by taking a long-term, planned approach to development. In contrast, national government policy is geared towards techno-economic criteria and may lead to only a minority of potential sites being developed, without realisation of wider social or environmental benefits aligned to local visions. The work highlights the importance of local strategic planning, enabled by aligned national policy, in realising the full economic, environmental and social benefits of DH. - Highlights: • Local governments are key to the development of district heating (DH). • Local government-led visions of DH seek to deliver complex value. • In the UK development is led by funding and commercial factors and is not strategic. • To enable DH, national policy must align with the vision of local actors. • Social and environmental criteria must be incorporated in decision-making.

  19. Progress in second-generation HTS wire development and manufacturing

    International Nuclear Information System (INIS)

    Selvamanickam, V.; Chen, Y.; Xiong, X.; Xie, Y.; Zhang, X.; Rar, A.; Martchevskii, M.; Schmidt, R.; Lenseth, K.; Herrin, J.

    2008-01-01

    2007 has marked yet another year of continued rapid progress in developing and manufacturing high-performance, long-length second-generation (2G) HTS wires at high speeds. Using ion beam assisted deposition (IBAD) MgO and associated buffer sputtering processes, SuperPower has now exceeded piece lengths of 1000 m of fully buffered tape reproducibly with excellent in-plane texture of 6-7 degrees and uniformity of about 2%. These kilometer lengths are produced at high speeds of about 350 m/h of 4 mm wide tape. In combination with metal organic chemical vapor deposition (MOCVD), 2G wires up to single piece lengths to 790 m with a minimum critical current value of 190 A/cm corresponding to a Critical current x Length performance of 150,100 Am have been achieved. Tape speeds up to 180 m/h have been reached MOCVD while maintaining critical currents above 200 A/cm in 100+ m lengths. Thick film MOCVD technology has been transitioned to Pilot manufacturing system where a minimum critical current of 320 A/cm has been demonstrated over a length of 155 m processed at a speed of 70 m/h in 4 mm width. Finally, nearly 10,000 m of 2G wire has been produced, exhaustively tested, and delivered to the Albany Cable project. The average minimum critical current of the wire delivered in 225 segments of 43-44 m is 70 A in 4 mm widths. A 30 m cable has been fabricated with this wire by Sumitomo Electric and has been installed in the power grid of National Grid in downtown Albany and is the world's first 2G device installed in the grid

  20. Progress in second-generation HTS wire development and manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Selvamanickam, V. [SuperPower, Inc., 450 Duane Avenue, Schenectady, NY 12304 (United States)], E-mail: vselva@superpower-inc.com; Chen, Y.; Xiong, X.; Xie, Y.; Zhang, X.; Rar, A.; Martchevskii, M.; Schmidt, R.; Lenseth, K.; Herrin, J. [SuperPower, Inc., 450 Duane Avenue, Schenectady, NY 12304 (United States)

    2008-09-15

    2007 has marked yet another year of continued rapid progress in developing and manufacturing high-performance, long-length second-generation (2G) HTS wires at high speeds. Using ion beam assisted deposition (IBAD) MgO and associated buffer sputtering processes, SuperPower has now exceeded piece lengths of 1000 m of fully buffered tape reproducibly with excellent in-plane texture of 6-7 degrees and uniformity of about 2%. These kilometer lengths are produced at high speeds of about 350 m/h of 4 mm wide tape. In combination with metal organic chemical vapor deposition (MOCVD), 2G wires up to single piece lengths to 790 m with a minimum critical current value of 190 A/cm corresponding to a Critical current x Length performance of 150,100 Am have been achieved. Tape speeds up to 180 m/h have been reached MOCVD while maintaining critical currents above 200 A/cm in 100+ m lengths. Thick film MOCVD technology has been transitioned to Pilot manufacturing system where a minimum critical current of 320 A/cm has been demonstrated over a length of 155 m processed at a speed of 70 m/h in 4 mm width. Finally, nearly 10,000 m of 2G wire has been produced, exhaustively tested, and delivered to the Albany Cable project. The average minimum critical current of the wire delivered in 225 segments of 43-44 m is 70 A in 4 mm widths. A 30 m cable has been fabricated with this wire by Sumitomo Electric and has been installed in the power grid of National Grid in downtown Albany and is the world's first 2G device installed in the grid.

  1. Developing novel 3D antennas using advanced additive manufacturing technology

    Science.gov (United States)

    Mirzaee, Milad

    In today's world of wireless communication systems, antenna engineering is rapidly advancing as the wireless services continue to expand in support of emerging commercial applications. Antennas play a key role in the performance of advanced transceiver systems where they serve to convert electric power to electromagnetic waves and vice versa. Researchers have held significant interest in developing this crucial component for wireless communication systems by employing a variety of design techniques. In the past few years, demands for electrically small antennas continues to increase, particularly among portable and mobile wireless devices, medical electronics and aerospace systems. This trend toward smaller electronic devices makes the three dimensional (3D) antennas very appealing, since they can be designed in a way to use every available space inside the devise. Additive Manufacturing (AM) method could help to find great solutions for the antennas design for next generation of wireless communication systems. In this thesis, the design and fabrication of 3D printed antennas using AM technology is studied. To demonstrate this application of AM, different types of antennas structures have been designed and fabricated using various manufacturing processes. This thesis studies, for the first time, embedded conductive 3D printed antennas using PolyLactic Acid (PLA) and Acrylonitrile Butadiene Styrene (ABS) for substrate parts and high temperature carbon paste for conductive parts which can be a good candidate to overcome the limitations of direct printing on 3D surfaces that is the most popular method to fabricate conductive parts of the antennas. This thesis also studies, for the first time, the fabrication of antennas with 3D printed conductive parts which can contribute to the new generation of 3D printed antennas.

  2. Vision drives correlated activity without patterned spontaneous activity in developing Xenopus retina.

    Science.gov (United States)

    Demas, James A; Payne, Hannah; Cline, Hollis T

    2012-04-01

    Developing amphibians need vision to avoid predators and locate food before visual system circuits fully mature. Xenopus tadpoles can respond to visual stimuli as soon as retinal ganglion cells (RGCs) innervate the brain, however, in mammals, chicks and turtles, RGCs reach their central targets many days, or even weeks, before their retinas are capable of vision. In the absence of vision, activity-dependent refinement in these amniote species is mediated by waves of spontaneous activity that periodically spread across the retina, correlating the firing of action potentials in neighboring RGCs. Theory suggests that retinorecipient neurons in the brain use patterned RGC activity to sharpen the retinotopy first established by genetic cues. We find that in both wild type and albino Xenopus tadpoles, RGCs are spontaneously active at all stages of tadpole development studied, but their population activity never coalesces into waves. Even at the earliest stages recorded, visual stimulation dominates over spontaneous activity and can generate patterns of RGC activity similar to the locally correlated spontaneous activity observed in amniotes. In addition, we show that blocking AMPA and NMDA type glutamate receptors significantly decreases spontaneous activity in young Xenopus retina, but that blocking GABA(A) receptor blockers does not. Our findings indicate that vision drives correlated activity required for topographic map formation. They further suggest that developing retinal circuits in the two major subdivisions of tetrapods, amphibians and amniotes, evolved different strategies to supply appropriately patterned RGC activity to drive visual circuit refinement. Copyright © 2011 Wiley Periodicals, Inc.

  3. 1994 Site Development Plan: A plan with vision

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    The 1994 Lawrence Livermore National Laboratory Site Development Plan has been developed during a period of great change and uncertainty. Our goal is to make possible the best use of the Laboratory`s resources to meet shifting national priorities in the post-Cold War world. Site Planning is an important component of the overall Laboratory strategic planning process. This plan focuses on opportunities for the Laboratory as well as on key site development issues including facility construction, redevelopment and reuse, site accessibility, and security. A major challenge is to achieve sufficient stability in the site planning and execution so that the processes of construction can occur efficiently while at the same time providing sufficient flexibility in site facilities so that a range of changing national needs can be accommodated. We are closely coupled to the DOE strategic planning process to meet this challenge.

  4. Commercial Electric Vehicle (EV) Development and Manufacturing Program

    Energy Technology Data Exchange (ETDEWEB)

    Leeve, Dion

    2014-06-30

    Navistar with the Department of Energy’s assistance undertook this effort to achieve the project objectives as listed in the next section. A wholly owned subsidiary of Navistar, Workhorse Sales Corporation was the original grant awardee and upon their discontinuation as a standalone business entity, Navistar assumed the role of principal investigator. The intent of the effort, as part of the American Recovery and Reinvestment Act (ARRA) was to produce zero emission vehicles that could meet the needs of the marketplace while reducing carbon emissions to zero. This effort was predicated upon the assumption that concurrent development activities in the lithium ion battery industry investigations would significantly increase their production volumes thus leading to substantial reductions in their manufacturing costs. As a result of this development effort much was learned about the overall system compatibility between the electric motor, battery pack, and charging capabilities. The original system was significantly revised and improved during the execution of this development effort. The overall approach that was chosen was to utilize a British zero emissions, class 2 truck that had been developed for their market, homologate it and modify it to meet the product requirements as specified in the grant details. All of these specific goals were achieved. During the course of marketing and selling the product valuable information was obtained as relates to customer expectations, price points, and product performance expectations, specifically those customer expectations about range requirements in urban delivery situations. While the grant requirements specified a range of 100 miles on a single charge, actual customer usage logs indicate a range of 40 miles or less is typical for their applications. The price point, primarily due to battery pack costs, was significantly higher than the mass market could bear. From Navistar’s and the overall industry’s perspective

  5. Developing Codes of Conduct for Manufacturers of College Apparel.

    Science.gov (United States)

    Nicklin, Julie L.

    1998-01-01

    Colleges and universities are establishing policies to ensure that clothing carrying their names are not being manufactured with "sweatshop" labor. The colleges' policies attempt to set acceptable standards for manufacturers producing the lucrative licensed lines. However, institutions are finding that it is difficult to enforce those…

  6. Developing a Vision of Pre-College Engineering Education

    Science.gov (United States)

    Marshall, Jill A.; Berland, Leema K.

    2012-01-01

    We report the results of a study focused on identifying and articulating an ''epistemic foundation'' underlying a pre-collegiate focus on engineering. We do so in the context of UTeach"Engineering" (UTE), a program supported in part by funding by the National Science Foundation and designed to develop a model approach to address the…

  7. How Development and Manufacturing Will Need to Be Structured-Heads of Development/Manufacturing May 20-21, 2014 Continuous Manufacturing Symposium.

    Science.gov (United States)

    Nepveux, Kevin; Sherlock, Jon-Paul; Futran, Mauricio; Thien, Michael; Krumme, Markus

    2015-03-01

    Continuous manufacturing (CM) is a process technology that has been used in the chemical industry for large-scale mass production of chemicals in single-purpose plants with benefit for many years. Recent interest has been raised to expand CM into the low-volume, high-value pharmaceutical business with its unique requirements regarding readiness for human use and the required quality, supply chain, and liability constraints in this business context. Using a fairly abstract set of definitions, this paper derives technical consequences of CM in different scenarios along the development-launch-supply axis in different business models and how they compare to batch processes. Impact of CM on functions in development is discussed and several operational models suitable for originators and other business models are discussed and specific aspects of CM are deduced from CM's technical characteristics. Organizational structures of current operations typically can support CM implementations with just minor refinements if the CM technology is limited to single steps or small sequences (bin-to-bin approach) and if the appropriate technical skill set is available. In such cases, a small, dedicated group focused on CM is recommended. The manufacturing strategy, as centralized versus decentralized in light of CM processes, is discussed and the potential impact of significantly shortened supply lead times on the organization that runs these processes. The ultimate CM implementation may be seen by some as a totally integrated monolithic plant, one that unifies chemistry and pharmaceutical operations into one plant. The organization supporting this approach will have to reflect this change in scope and responsibility. The other extreme, admittedly futuristic at this point, would be a highly decentralized approach with multiple smaller hubs; this would require a new and different organizational structure. This processing approach would open up new opportunities for products that

  8. How development and manufacturing will need to be structured--heads of development/manufacturing. May 20-21, 2014 Continuous Manufacturing Symposium.

    Science.gov (United States)

    Nepveux, Kevin; Sherlock, Jon-Paul; Futran, Mauricio; Thien, Michael; Krumme, Markus

    2015-03-01

    Continuous manufacturing (CM) is a process technology that has been used in the chemical industry for large-scale mass production of chemicals in single-purpose plants with benefit for many years. Recent interest has been raised to expand CM into the low-volume, high-value pharmaceutical business with its unique requirements regarding readiness for human use and the required quality, supply chain, and liability constraints in this business context. Using a fairly abstract set of definitions, this paper derives technical consequences of CM in different scenarios along the development-launch-supply axis in different business models and how they compare to batch processes. Impact of CM on functions in development is discussed and several operational models suitable for originators and other business models are discussed and specific aspects of CM are deduced from CM's technical characteristics. Organizational structures of current operations typically can support CM implementations with just minor refinements if the CM technology is limited to single steps or small sequences (bin-to-bin approach) and if the appropriate technical skill set is available. In such cases, a small, dedicated group focused on CM is recommended. The manufacturing strategy, as centralized versus decentralized in light of CM processes, is discussed and the potential impact of significantly shortened supply lead times on the organization that runs these processes. The ultimate CM implementation may be seen by some as a totally integrated monolithic plant, one that unifies chemistry and pharmaceutical operations into one plant. The organization supporting this approach will have to reflect this change in scope and responsibility. The other extreme, admittedly futuristic at this point, would be a highly decentralized approach with multiple smaller hubs; this would require a new and different organizational structure. This processing approach would open up new opportunities for products that

  9. Development of Non-contact Respiratory Monitoring System for Newborn Using a FG Vision Sensor

    Science.gov (United States)

    Kurami, Yoshiyuki; Itoh, Yushi; Natori, Michiya; Ohzeki, Kazuo; Aoki, Yoshimitsu

    In recent years, development of neonatal care is strongly hoped, with increase of the low-birth-weight baby birth rate. Especially respiration of low-birth-weight baby is incertitude because central nerve and respiratory function is immature. Therefore, a low-birth-weight baby often causes a disease of respiration. In a NICU (Neonatal Intensive Care Unit), neonatal respiration is monitored using cardio-respiratory monitor and pulse oximeter at all times. These contact-type sensors can measure respiratory rate and SpO2 (Saturation of Peripheral Oxygen). However, because a contact-type sensor might damage the newborn's skin, it is a real burden to monitor neonatal respiration. Therefore, we developed the respiratory monitoring system for newborn using a FG (Fiber Grating) vision sensor. FG vision sensor is an active stereo vision sensor, it is possible for non-contact 3D measurement. A respiratory waveform is calculated by detecting the vertical motion of the thoracic and abdominal region with respiration. We attempted clinical experiment in the NICU, and confirmed the accuracy of the obtained respiratory waveform was high. Non-contact respiratory monitoring of newborn using a FG vision sensor enabled the minimally invasive procedure.

  10. Development of a Control and Vision Interface for an AR.Drone

    Directory of Open Access Journals (Sweden)

    Cheema Prasad

    2016-01-01

    Full Text Available The AR.Drone is a remote controlled quadcopter which is low cost, and readily available for consumers. Therefore it represents a simple test-bed on which control and vision research may be conducted. However, interfacing with the AR.Drone can be a challenge for new researchers as the AR.Drone's application programming interface (API is built on low-level, bit-wise, C instructions. Therefore, this paper will demonstrate the use of an additional layer of abstraction on the AR.Drone’s API via the Robot Operating System (ROS. Using ROS, the construction of a high-level graphical user interface (GUI will be demonstrated, with the explicit aim of assisting new researchers in developing simple control and vision algorithms to interface with the AR.Drone. The GUI, formally known as the Control and Vision Interface (CVI is currently used to research and develop computer vision, simultaneous localisation and mapping (SLAM, and path planning algorithms by a number of postgraduate and undergraduate students at the school of Aeronautical, Mechanical, and Mechatronics Engineering (AMME in The University of Sydney.

  11. Developing a cyber-physical system for hybrid manufacturing in an internet-of-things context

    NARCIS (Netherlands)

    Grefen, P.W.P.J.; Vanderfeesten, I.T.P.; Boultadakis, G.; Gonzalez Garcia, Christian; Garcia-Diaz, Vicente; Pelayo Garcia-Bustelo, B. Cristina; Cueva Lovelle, Juan Manuel

    2018-01-01

    This chapter describes design and development of the HORSE system for process-oriented hybrid manufacturing that seamlessly integrates human and robotics actors in vertical manufacturing cells that are horizontally coupled in end-to-end manufacturing processes. The HORSE system supports advanced

  12. PENGEMBANGAN COMPUTER VISION SYSTEM SEDERHANA UNTUK MENENTUKAN KUALITAS TOMAT Development of a simple Computer Vision System to determine tomato quality

    Directory of Open Access Journals (Sweden)

    Rudiati Evi Masithoh

    2012-05-01

    Full Text Available The purpose of this research was to develop a simple computer vision system (CVS to non-destructively measure tomato quality based on its Red Gren Blue (RGB color parameter. Tomato quality parameters measured were Brix, citric acid, vitamin C, and total sugar. This system consisted of a box to place object, a webcam to capture images, a computer to process images, illumination system, and an image analysis software which was equipped with artificial neural networks technique for determining tomato quality. Network architecture was formed with 3 layers consisting of1 input layer with 3 input neurons, 1 hidden layer with 14 neurons using logsig activation function, and 5 output layers using purelin activation function by using backpropagation training algorithm. CVS developed was able to predict the quality parameters of a Brix value, vitamin C, citric acid, and total sugar. To obtain the predicted values which were equal or close to the actual values, a calibration model was required. For Brix value, the actual value obtained from the equation y = 12,16x – 26,46, with x was Brix predicted. The actual values of vitamin C, citric acid, and total sugar were obtained from y = 1,09x - 3.13, y = 7,35x – 19,44,  and  y = 1.58x – 0,18,, with x was the value of vitamin C, citric acid, and total sugar, respectively. ABSTRAK Tujuan penelitian adalah mengembangkan computer vision system (CVS sederhana untuk menentukan kualitas tomat secara non­destruktif berdasarkan parameter warna Red Green Blue (RGB. Parameter kualitas tomat yang diukur ada­ lah Brix, asam sitrat, vitamin C, dan gula total. Sistem ini terdiri peralatan utama yaitu kotak untuk meletakkan obyek, webcam untuk menangkap citra, komputer untuk mengolah data, sistem penerangan, dan perangkat lunak analisis citra yang dilengkapi dengan jaringan syaraf tiruan untuk menentukan kualitas tomat. Arsitektur jaringan dibentuk dengan3 lapisan yang terdiri dari 1 lapisan masukan dengan 3 sel

  13. Source removal strategy development for manufactured gas plant sites

    International Nuclear Information System (INIS)

    Golchin, J.; Nelson, S.

    1994-01-01

    A source removal action plan was developed by Midwest Gas and the Iowa Department of Natural Resources to address the source coal tar contamination within the underground gas holder basin at former Manufactured Gas Plant (MGP) sites. The procedure utilizes a mixture of coal, contaminated soil and coal rat sludge to provide a material that had suitable material handling characteristics for shipment and burning in high efficiency utility boilers. Screening of the mixture was required to remove oversized debris and ferrous metal. The resulting mixture did not exhibit toxic characteristics when tested under the Toxicity Characteristics Leaching Procedure (TCLP). Test results on the coal tar sludges have indicated that the more pure coal tar materials may fail the TCLP test and be classified as a RCRA hazardous waste. The processing procedure was designed to stabilize the coal tar sludges and render those sludges less hazardous and, as a result, able to pass the TCLP test. This procedure was adopted by the Edison Electric Institute to develop a national guidance document for remediation of MGP sites. The EPA Office of Solid Waste and Emergency Response recommended this strategy to the Regional Waste Management Directors as a practical tool for handling wastes that may exhibit the RCRA characteristics

  14. Design and development of progressive tool for manufacturing washer

    Science.gov (United States)

    Annigeri, Ulhas K.; Raghavendra Ravi Kiran, K.; Deepthi, Y. P.

    2017-07-01

    In a progressive tool the raw material is worked at different station to finally fabricate the component. A progressive tool is a lucrative tool for mass production of components. A lot of automobile and other transport industries develop progressive tool for the production of components. The design of tool involves lot of planning and the same amount of skill of process planning is required in the fabrication of the tool. The design also involves use of thumb rules and standard elements as per experience gained in practice. Manufacturing the press tool is a laborious task as special jigs and fixtures have to be designed for the purpose. Assembly of all the press tool elements is another task where use of accurate measuring instruments for alignment of various tool elements is important. In the present study, design and fabrication of progressive press tool for production of washer has been developed and the press tool has been tried out on a mechanical type of press. The components produced are to dimensions.

  15. Component Manufacturing Development for the National Compact Stellarator Experiment (NCSX)

    International Nuclear Information System (INIS)

    Heitzenroeder, P.J.; Brown, T.G.; Chrzanowski, J.H.; Cole, M.J.; Goranson, P.L.; Neilson, G.H.; Nelson, B.E.; Reiersen, W.T.; Sutton, L.L.; Williamson, D.E.; Viola, M.E.

    2004-11-01

    NCSX [National Compact Stellarator Experiment] is the first of a new class of stellarators called compact stellarators which hold the promise of retaining the steady state feature of the stellarator but at a much lower aspect ratio and using a quasi-axisymmetric magnetic field to obtain tokamak-like performance. Although much of NCSX is conventional in design and construction, the vacuum vessel and modular coils provide significant engineering challenges due to their complex shapes, need for high dimensional accuracy, and the high current density required in the modular coils due space constraints. Consequently, a three-phase development program has been undertaken. In the first phase, laboratory/industrial studies were performed during the development of the conceptual design to permit advances in manufacturing technology to be incorporated into NCSX's plans. In the second phase, full-scale prototype modular coil winding forms, compacted cable conductors, and 20 degree sectors of the vacuum vessel were fabricated in industry. In parallel, the NCSX project team undertook RandD studies that focused on the windings. The third (production) phase began in September 2004. First plasma is scheduled for January 2008

  16. Component manufacturing development for the National Compact Stellarator Experiment (NCSX)

    International Nuclear Information System (INIS)

    Heitzenroeder, P.J.; Brown, T.G.; Chrzanowski, J.H.; Neilson, G.H.; Reiersen, W.T.; Sutton, L.L.; Viola, M.E.; Cole, M.J.; Goranson, P.L.; Nelson, B.E.; Williamson, D.E.

    2005-01-01

    NCSX is the first of a new class of stellarators called compact stellarators which hold the promise of retaining the steady state feature of the stellarator but at a much lower aspect ratio and using a quasi-axisymmetric magnetic field to obtain tokamak-like performance. Although much of NCSX is conventional in design and construction, the vacuum vessel and modular coils provide significant engineering challenges due to their complex shapes, need for high dimensional accuracy, and the need for high current density in the modular coils due space constraints. Consequently, a three-phase development program has been undertaken. In the first phase, laboratory / industrial studies were performed during the development of the conceptual design to permit advances in manufacturing technology to be incorporated into NCSX's plans. In the second phase, full-scale prototype modular coil winding forms, compacted cable conductors, and 20-degree sectors of the vacuum vessel were fabricated in industry. In parallel, the NCSX project team undertook R and D studies that focused on the windings. The third (production) phase began in September 2004. First plasma is scheduled for January 2008. (author)

  17. DUPIC nuclear fuel manufacturing and process technology development

    International Nuclear Information System (INIS)

    Yang, Myung Seung; Park, J. J.; Lee, J. W.

    2000-05-01

    In this study, DUPIC fuel fabrication technology and the active fuel laboratory were developed for the study of spent nuclear fuel. A new nuclear fuel using highly radioactive nuclear materials can be studied at the active fuel laboratory. Detailed DUPIC fuel fabrication process flow was developed considering the manufacturing flow, quality control process and material accountability. The equipment layout of about twenty DUPIC equipment at IMEF M6 hot cell was established for the minimization of the contamination during DUPIC processes. The characteristics of the SIMFUEL powder and pellets was studied in terms of milling conditions. The characteristics of DUPIC powder and pellet was studied by using 1 kg of spent PWR fuel at PIEF nr.9405 hot cell. The results were used as reference process conditions for following DUPIC fuel fabrication at IMEF M6. Based on the reference fabrication process conditions, the main DUPIC pellet fabrication campaign has been started at IMEF M6 using 2 kg of spent PWR fuel since 2000 January. As of March 2000, about thirty DUPIC pellets were successfully fabricated

  18. DUPIC nuclear fuel manufacturing and process technology development

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Myung Seung; Park, J. J.; Lee, J. W. [and others

    2000-05-01

    In this study, DUPIC fuel fabrication technology and the active fuel laboratory were developed for the study of spent nuclear fuel. A new nuclear fuel using highly radioactive nuclear materials can be studied at the active fuel laboratory. Detailed DUPIC fuel fabrication process flow was developed considering the manufacturing flow, quality control process and material accountability. The equipment layout of about twenty DUPIC equipment at IMEF M6 hot cell was established for the minimization of the contamination during DUPIC processes. The characteristics of the SIMFUEL powder and pellets was studied in terms of milling conditions. The characteristics of DUPIC powder and pellet was studied by using 1 kg of spent PWR fuel at PIEF nr.9405 hot cell. The results were used as reference process conditions for following DUPIC fuel fabrication at IMEF M6. Based on the reference fabrication process conditions, the main DUPIC pellet fabrication campaign has been started at IMEF M6 using 2 kg of spent PWR fuel since 2000 January. As of March 2000, about thirty DUPIC pellets were successfully fabricated.

  19. Achievement report on developing inverse manufacturing system in fiscal 1998; 1998 nendo inverse manufacturing system no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Research and development has been performed on a circulating type production system, or an inverse manufacturing system, to minimize the environmental load in the entire life cycle of industrial products from design to manufacturing, maintenance, recovery, and re-utilization. In developing the recycling information system, discussion and extraction were executed on the data to be exchanged between manufacturers and users in the inverse society. A new individual parts history control system was developed. In developing the recycling processing system, a prototype system was evaluated by using hypothetical data, wherein the possibility of improving the recycling processing efficiency and reducing the cost was verified. In addition, trial design was made on a recycling processing plant in consideration of the cost effect to get the future plant image. In fabricating the inverse manufacturing products, a prototype concept model was made for information terminal devices. Development was performed on such elementary technologies as the easy-to-disintegrate structure technology, self-integration connecting structure and environmental hysteresis detection system. (NEDO)

  20. The Development of a Practical Framework for the Implementation of JIT Manufacturing

    OpenAIRE

    Hallihan, A.

    1996-01-01

    This research develops a framework to guide practitioners through the process of implementing Just In Time manufacturing in the commercial aircraft manufacturing industry. The scope of Just In Time manufacturing is determined through an analysis of its evolution and current use. Current approaches to its implementation are reviewed and shortcomings are identified. A requirement to allow practitioners to tailor the approach to the implementation of Just In Time manufacturing, ...

  1. Surrogate Final Technical Report for "Solar: A Photovoltaic Manufacturing Development Facility"

    Energy Technology Data Exchange (ETDEWEB)

    Farrar, Paul [State University of New York Research Foundation, Albany, NY (United States)

    2014-06-27

    The project goal to create a first-of-a-kind crystalline Silicon (c-Si) photovoltaic (PV) Manufacturing & Technology Development Facility (MDF) that will support the growth and maturation of a strong domestic PV manufacturing industry, based on innovative and differentiated technology, by ensuring industry participants can, in a timely and cost-effective manner, access cutting-edge manufacturing equipment and production expertise needed to accelerate the transition of innovative technologies from R&D into manufacturing.

  2. Development of an In Flight Vision Self-Assessment Questionnaire for Long Duration Space Missions

    Science.gov (United States)

    Byrne, Vicky E.; Gibson, Charles R.; Pierpoline, Katherine M.

    2010-01-01

    OVERVIEW A NASA Flight Medicine optometrist teamed with a human factors specialist to develop an electronic questionnaire for crewmembers to record their visual acuity test scores and perceived vision assessment. It will be implemented on the International Space Station (ISS) and administered as part of a suite of tools for early detection of potential vision changes. The goal of this effort was to rapidly develop a set of questions to help in early detection of visual (e.g. blurred vision) and/or non-visual (e.g. headaches) symptoms by allowing the ISS crewmembers to think about their own current vision during their spaceflight missions. PROCESS An iterative process began with a Space Shuttle one-page paper questionnaire generated by the optometrist that was updated by applying human factors design principles. It was used as a baseline to establish an electronic questionnaire for ISS missions. Additional questions needed for the ISS missions were included and the information was organized to take advantage of the computer-based file format available. Human factors heuristics were applied to the prototype and then they were reviewed by the optometrist and procedures specialists with rapid-turn around updates that lead to the final questionnaire. CONCLUSIONS With about only a month lead time, a usable tool to collect crewmember assessments was developed through this cross-discipline collaboration. With only a little expenditure of energy, the potential payoff is great. ISS crewmembers will complete the questionnaire at 30 days into the mission, 100 days into the mission and 30 days prior to return to Earth. The systematic layout may also facilitate physicians later data extraction for quick interpretation of the data. The data collected along with other measures (e.g. retinal and ultrasound imaging) at regular intervals could potentially lead to early detection and treatment of related vision problems than using the other measures alone.

  3. Develop and Manufacture an Ergonomically Sound Glovebox Glove Report

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, Cindy M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-10-18

    Ergonomic injury and radiation exposure are two safety concerns for the Plutonium Facility at Los Alamos National Laboratory (LANL). This facility employs the largest number of gloveboxes (GB) at LANL with approximately 6000 gloves installed. The current GB glove design dates back to the 1960’s and is not based on true hand anatomy, revealing several issues: short fingers, inappropriate length from the wrist to finger webbing, nonexistent joint angles and incorrect thumb placement. These design flaws are directly related to elbow (lateral epicondylitis) and thumb (DeQuervain’s tenosynovitis) injuries. The current design also contributes to increased wear on the glove, causing unplanned glove openings (failures) which places workers at risk of exposure. An improved glovebox glove design has three significant benefits: 1) it will reduce the risk of injury, 2) it will improve comfort and productivity, and 3) it will reduce the risk of a glovebox failures. The combination of these three benefits has estimated savings of several million dollars. The new glove design incorporated the varied physical attributes of workers ranging from the 5th percentile female to the 95th percentile male. Anthropometric hand dimensions along with current GB worker dimensions were used to develop the most comprehensive design specifications for the new glove. Collaboration with orthopedic hand surgeons also provided major contributtions to the design. The new glovebox glove was developed and manufactured incorporating over forty dimensions producing the most comprehensive ergonomically sound design. The new design received a LANL patent (patent attorney docket No: LANS 36USD1 “Protective Glove”, one of 20 highest patents awarded by the Richard P. Feynman Center for Innovation. The glove dimensions were inputed into a solid works model which was used to produce molds. The molds were then shipped to a glove manufacturer for production of the new glovebox gloves. The new

  4. EUV source development for high-volume chip manufacturing tools

    Science.gov (United States)

    Stamm, Uwe; Yoshioka, Masaki; Kleinschmidt, Jürgen; Ziener, Christian; Schriever, Guido; Schürmann, Max C.; Hergenhan, Guido; Borisov, Vladimir M.

    2007-03-01

    Xenon-fueled gas discharge produced plasma (DPP) sources were integrated into Micro Exposure Tools already in 2004. Operation of these tools in a research environment gave early learning for the development of EUV sources for Alpha and Beta-Tools. Further experiments with these sources were performed for basic understanding on EUV source technology and limits, especially the achievable power and reliability. The intermediate focus power of Alpha-Tool sources under development is measured to values above 10 W. Debris mitigation schemes were successfully integrated into the sources leading to reasonable collector mirror lifetimes with target of 10 billion pulses due to the effective debris flux reduction. Source collector mirrors, which withstand the radiation and temperature load of Xenon-fueled sources, have been developed in cooperation with MediaLario Technologies to support intermediate focus power well above 10 W. To fulfill the requirements for High Volume chip Manufacturing (HVM) applications, a new concept for HVM EUV sources with higher efficiency has been developed at XTREME technologies. The discharge produced plasma (DPP) source concept combines the use of rotating disk electrodes (RDE) with laser exited droplet targets. The source concept is called laser assisted droplet RDE source. The fuel of these sources has been selected to be Tin. The conversion efficiency achieved with the laser assisted droplet RDE source is 2-3x higher compared to Xenon. Very high pulse energies well above 200 mJ / 2π sr have been measured with first prototypes of the laser assisted droplet RDE source. If it is possible to maintain these high pulse energies at higher repetition rates a 10 kHz EUV source could deliver 2000 W / 2π sr. According to the first experimental data the new concept is expected to be scalable to an intermediate focus power on the 300 W level.

  5. Fiscal 1998 achievement report on regional consortium research and development project. Venture business fostering regional consortium--Creation of key industries (Development of Task-Oriented Robot Control System TORCS based on versatile 3-dimensional vision system VVV--Vertical Volumetric Vision); 1998 nendo sanjigen shikaku system VVV wo mochiita task shikogata robot seigyo system TORCS no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Research is conducted for the development of a highly autonomous robot control system TORCS for the purpose of realizing an automated, unattended manufacturing process. In the development of an interface, an indicating function is built which easily adds or removes job attributes relative to given shape data. In the development of a 3-dimensional vision system VVV, a camera set and a new range finder are manufactured for ranging and recognition, the latter being an improvement from the conventional laser-aided range finder TDS. A 3-dimensional image processor is developed, which picks up pictures at a speed approximately 8 times higher than that of the conventional type. In the development of orbit calculating software programs, a job planner, an operation planner, and a vision planner are prepared. A robot program which is necessary for robot operation is also prepared. In an evaluation test involving a simulated casting line, the pick-and-place concept is successfully implemented for several kinds of cast articles positioned at random on a conveyer in motion. Difference in environmental conditions between manufacturing sites is not pursued in this paper on the ground that such should be discussed on the case-by-case basis. (NEDO)

  6. Low vision rehabilitation and ocular problems among industrial workers in a developing country.

    Science.gov (United States)

    Omar, R; Knight, V F; Aziz Mohammed, M A

    2014-01-01

    Work-related ocular injuries and illnesses were among the major causes of job absenteeism. This study was conducted to determine if low vision rehabilitation was provided following work-related ocular problems among industrial workers in a developing country. This was a retrospective analysis of case records. Randomly selected records of all employees from the Social Security Organization (SOCSO) Medical Board for 2004 who suffered from ocular injuries and illnesses were selected. Rates of ocular injuries and illnesses according to age, gender, races, types of injuries, types of industries, visual rehabilitation and types of medical interventions were tabulated and analysed. A total of 26 cases of ocular injuries and illnesses were identified where 46.2% suffered from ocular injuries. The remaining 53.8% had ocular and/or systemic diseases. The 40-49-yearold age group suffered the greatest number of injuries (26.92%). Ocular perforating injuries (66.67%) and ocular contusions (33.33%) were the most common types of ocular injury among industrial workers in Kuala Lumpur. Most injuries occurred among workers in the service industry (50%). Almost 60% of these injured workers did not receive any low vision rehabilitation after medical intervention while 25% were given contact lenses or spectacles as rehabilitation and remaining had surgery. The low vision rehabilitation is still unexplored in the management of ocular injuries and illnesses among industrial workers. Introducing low vision rehabilitation can benefit both workers and employers as it provides care beyond spectacles or contact lens prescriptions.

  7. Developing a vision and strategic action plan for future community-based residency training.

    Science.gov (United States)

    Skelton, Jann B; Owen, James A

    2016-01-01

    The Community Pharmacy Residency Program (CPRP) Planning Committee convened to develop a vision and a strategic action plan for the advancement of community pharmacy residency training. Aligned with the profession's efforts to achieve provider status and expand access to care, the Future Vision and Action Plan for Community-based Residency Training will provide guidance, direction, and a strategic action plan for community-based residency training to ensure that the future needs of community-based pharmacist practitioners are met. National thought leaders, selected because of their leadership in pharmacy practice, academia, and residency training, served on the planning committee. The committee conducted a series of conference calls and an in-person strategic planning meeting held on January 13-14, 2015. Outcomes from the discussions were supplemented with related information from the literature. Results of a survey of CPRP directors and preceptors also informed the planning process. The vision and strategic action plan for community-based residency training is intended to advance training to meet the emerging needs of patients in communities that are served by the pharmacy profession. The group anticipated the advanced skills required of pharmacists serving as community-based pharmacist practitioners and the likely education, training and competencies required by future residency graduates in order to deliver these services. The vision reflects a transformation of community residency training, from CPRPs to community-based residency training, and embodies the concept that residency training should be primarily focused on training the individual pharmacist practitioner based on the needs of patients served within the community, and not on the physical location where pharmacy services are provided. The development of a vision statement, core values statements, and strategic action plan will provide support, guidance, and direction to the profession of pharmacy to

  8. Developing a Continuous Bioprocessing Approach to Stromal Cell Manufacture.

    Science.gov (United States)

    Miotto, Martina; Gouveia, Ricardo; Abidin, Fadhilah Zainal; Figueiredo, Francisco; Connon, Che J

    2017-11-29

    To this day, the concept of continuous bioprocessing has been applied mostly to the manufacture of molecular biologics such as proteins, growth factors, and secondary metabolites with biopharmaceutical uses. The present work now sets to explore the potential application of continuous bioprocess methods to source large numbers of human adherent cells with potential therapeutic value. To this purpose, we developed a smart multifunctional surface coating capable of controlling the attachment, proliferation, and subsequent self-detachment of human corneal stromal cells. This system allowed the maintenance of cell cultures under steady-state growth conditions, where self-detaching cells were continuously replenished by the proliferation of those remaining attached. This facilitated a closed, continuous bioprocessing platform with recovery of approximately 1% of the total adherent cells per hour, a yield rate that was maintained for 1 month. Moreover, both attached and self-detached cells were shown to retain their original phenotype. Together, these results represent the proof-of-concept for a new high-throughput, high-standard, and low-cost biomanufacturing strategy with multiple potentials and important downstream applications.

  9. Cleaning Process Development for Metallic Additively Manufactured Parts

    Science.gov (United States)

    Tramel, Terri L.; Welker, Roger; Lowery, Niki; Mitchell, Mark

    2014-01-01

    Additive Manufacturing of metallic components for aerospace applications offers many advantages over traditional manufacturing techniques. As a new technology, many aspects of its widespread utilization remain open to investigation. Among these are the cleaning processes that can be used for post finishing of parts and measurements to verify effectiveness of the cleaning processes. Many cleaning and drying processes and measurement methods that have been used for parts manufactured using conventional techniques are candidates that may be considered for cleaning and verification of additively manufactured parts. Among these are vapor degreasing, ultrasonic immersion and spray cleaning, followed by hot air drying, vacuum baking and solvent displacement drying. Differences in porosity, density, and surface finish of additively manufactured versus conventionally manufactured parts may introduce new considerations in the selection of cleaning and drying processes or the method used to verify their effectiveness. This presentation will review the relative strengths and weaknesses of different candidate cleaning and drying processes as they may apply to additively manufactured metal parts for aerospace applications. An ultrasonic cleaning technique for exploring the cleanability of parts will be presented along with an example using additively manufactured Inconel 718 test specimens to illustrate its use. The data analysis shows that this ultrasonic cleaning approach results in a well-behaved ultrasonic cleaning/extraction behavior. That is, it does not show signs of accelerated cavitation erosion of the base material, which was later confirmed by neutron imaging. In addition, the analysis indicated that complete cleaning would be achieved by ultrasonic immersion cleaning at approximately 5 minutes, which was verified by subsequent cleaning of additional parts.

  10. Development of Standard Approach for Sickle Blade Manufacturing

    OpenAIRE

    Noordin, M. N. A; Hudzari, R. M; Azuan, H. N; Zainon, M. S; Mohamed, S. B; Wafi, S. A

    2016-01-01

    The sickle blade used in the motorised palm cutter known as “CANTAS” provides fast, easy and safe pruning and harvesting for those hard to reach applications. Jariz Technologies Company is experiencing problem in the consistency of sickle blade which was supplied by various blade manufacturers. Identifying the proper blade material with a certain hardness value would produce a consistent as well as long lasting sickle blade. A Standard Operating Procedure (SOP) in the manufacturing of the sic...

  11. Development of a Wireless Computer Vision Instrument to Detect Biotic Stress in Wheat

    Directory of Open Access Journals (Sweden)

    Joaquin J. Casanova

    2014-09-01

    Full Text Available Knowledge of crop abiotic and biotic stress is important for optimal irrigation management. While spectral reflectance and infrared thermometry provide a means to quantify crop stress remotely, these measurements can be cumbersome. Computer vision offers an inexpensive way to remotely detect crop stress independent of vegetation cover. This paper presents a technique using computer vision to detect disease stress in wheat. Digital images of differentially stressed wheat were segmented into soil and vegetation pixels using expectation maximization (EM. In the first season, the algorithm to segment vegetation from soil and distinguish between healthy and stressed wheat was developed and tested using digital images taken in the field and later processed on a desktop computer. In the second season, a wireless camera with near real-time computer vision capabilities was tested in conjunction with the conventional camera and desktop computer. For wheat irrigated at different levels and inoculated with wheat streak mosaic virus (WSMV, vegetation hue determined by the EM algorithm showed significant effects from irrigation level and infection. Unstressed wheat had a higher hue (118.32 than stressed wheat (111.34. In the second season, the hue and cover measured by the wireless computer vision sensor showed significant effects from infection (p = 0.0014, as did the conventional camera (p < 0.0001. Vegetation hue obtained through a wireless computer vision system in this study is a viable option for determining biotic crop stress in irrigation scheduling. Such a low-cost system could be suitable for use in the field in automated irrigation scheduling applications.

  12. Vision of Energy Development, Relationships and Influences in the Period Until Year 2050 in Croatia

    International Nuclear Information System (INIS)

    Granic, G.; Pesut, D.; Juric, Z.

    2011-01-01

    The paper discussed the vision of energy development opportunities, relationships and influences in Croatia for the period until the year 2050. The analysis has been made on a qualitative level which includes energy markets, energy efficiency, conventional and renewable energy sources. In the end, recommendations for further energy system development are presented. Authors support the new concept of development platform, which is based on energy efficiency, new technologies and renewable energy sources. Croatia has all resources for its realization. The new development platform is also a possibility for developing science and economy. (author)

  13. Development of the computer-aided process planning (CAPP system for polymer injection molds manufacturing

    Directory of Open Access Journals (Sweden)

    J. Tepić

    2011-10-01

    Full Text Available Beginning of production and selling of polymer products largely depends on mold manufacturing. The costs of mold manufacturing have significant share in the final price of a product. The best way to improve and rationalize polymer injection molds production process is by doing mold design automation and manufacturing process planning automation. This paper reviews development of a dedicated process planning system for manufacturing of the mold for injection molding, which integrates computer-aided design (CAD, computer-aided process planning (CAPP and computer-aided manufacturing (CAM technologies.

  14. Intelligent Processing Equipment Developments Within the Navy's Manufacturing Technology Centers of Excellence

    Science.gov (United States)

    Nanzetta, Philip

    1992-01-01

    The U.S. Navy has had an active Manufacturing Technology (MANTECH) Program aimed at developing advanced production processes and equipment since the late-1960's. During the past decade, however, the resources of the MANTECH program were concentrated in Centers of Excellence. Today, the Navy sponsors four manufacturing technology Centers of Excellence: the Automated Manufacturing Research Facility (AMRF); the Electronics Manufacturing Productivity Facility (EMPF); the National Center for Excellence in Metalworking Technology (NCEMT); and the Center of Excellence for Composites Manufacturing Technology (CECMT). This paper briefly describes each of the centers and summarizes typical Intelligent Equipment Processing (IEP) projects that were undertaken.

  15. Methanization in France: visions in 2050 and needs of research, development and innovation

    International Nuclear Information System (INIS)

    Autret, E.; Theobald, O.; Bastide, G.; Thual, J.

    2017-01-01

    In 2016, Ademe, the French Agency for Environment and Energy Management worked with an expert panel to write a reference document, so-called strategic a road-map, for all actors involved in research, development and innovation in the field of methanization. This collective work, managed by Ademe, has gathered seventeen experts, and has been successfully achieved within 6 months. The panel has first imagined desirable visions of methanization in France in 2050 to derive obstacles and identify research needs. (authors)

  16. Development of a model of machine hand eye coordination and program specifications for a topological machine vision system

    Science.gov (United States)

    1972-01-01

    A unified approach to computer vision and manipulation is developed which is called choreographic vision. In the model, objects to be viewed by a projected robot in the Viking missions to Mars are seen as objects to be manipulated within choreographic contexts controlled by a multimoded remote, supervisory control system on Earth. A new theory of context relations is introduced as a basis for choreographic programming languages. A topological vision model is developed for recognizing objects by shape and contour. This model is integrated with a projected vision system consisting of a multiaperture image dissector TV camera and a ranging laser system. System program specifications integrate eye-hand coordination and topological vision functions and an aerospace multiprocessor implementation is described.

  17. Development of novel IVD assays: a manufacturer's perspective.

    Science.gov (United States)

    Metcalfe, Thomas A

    2010-01-01

    IVD manufacturers are heavily reliant on novel IVD assays to fuel their growth and drive innovation within the industry. They represent a key part of the IVD industry's value proposition to customers and the healthcare industry in general, driving product differentiation, helping to create demand for new systems and generating incremental revenue. However, the discovery of novel biomarkers and their qualification for a specific clinical purpose is a high risk undertaking and the large, risky investments associated with doing this on a large scale are incompatible with IVD manufacturer's business models. This article describes the sources of novel IVD assays, the processes for discovering and qualifying novel assays and the reliance of IVD manufacturers on collaborations and in-licensing to source new IVD assays for their platforms.

  18. Development of a Compact Range-gated Vision System to Monitor Structures in Low-visibility Environments

    International Nuclear Information System (INIS)

    Ahn, Yong-Jin; Park, Seung-Kyu; Baik, Sung-Hoon; Kim, Dong-Lyul; Choi, Young-Soo; Jeong, Kyung-Min

    2015-01-01

    Image acquisition in disaster area or radiation area of nuclear industry is an important function for safety inspection and preparing appropriate damage control plans. So, automatic vision system to monitor structures and facilities in blurred smoking environments such as the places of a fire and detonation is essential. Vision systems can't acquire an image when the illumination light is blocked by disturbance materials, such as smoke, fog and dust. To overcome the imaging distortion caused by obstacle materials, robust vision systems should have extra-functions, such as active illumination through disturbance materials. One of active vision system is a range-gated imaging system. The vision system based on the range-gated imaging system can acquire image data from the blurred and darken light environments. Range-gated imaging (RGI) is a direct active visualization technique using a highly sensitive image sensor and a high intensity illuminant. Currently, the range-gated imaging technique providing 2D and range image data is one of emerging active vision technologies. The range-gated imaging system gets vision information by summing time sliced vision images. In the RGI system, a high intensity illuminant illuminates for ultra-short time and a highly sensitive image sensor is gated by ultra-short exposure time to only get the illumination light. Here, the illuminant illuminates objects by flashing strong light through disturbance materials, such as smoke particles and dust particles. In contrast to passive conventional vision systems, the RGI active vision technology enables operation even in harsh environments like low-visibility smoky environment. In this paper, a compact range-gated vision system is developed to monitor structures in low-visibility environment. The system consists of illumination light, a range-gating camera and a control computer. Visualization experiments are carried out in low-visibility foggy environment to see imaging capability

  19. Development of a Compact Range-gated Vision System to Monitor Structures in Low-visibility Environments

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Yong-Jin; Park, Seung-Kyu; Baik, Sung-Hoon; Kim, Dong-Lyul; Choi, Young-Soo; Jeong, Kyung-Min [KAERI, Daejeon (Korea, Republic of)

    2015-05-15

    Image acquisition in disaster area or radiation area of nuclear industry is an important function for safety inspection and preparing appropriate damage control plans. So, automatic vision system to monitor structures and facilities in blurred smoking environments such as the places of a fire and detonation is essential. Vision systems can't acquire an image when the illumination light is blocked by disturbance materials, such as smoke, fog and dust. To overcome the imaging distortion caused by obstacle materials, robust vision systems should have extra-functions, such as active illumination through disturbance materials. One of active vision system is a range-gated imaging system. The vision system based on the range-gated imaging system can acquire image data from the blurred and darken light environments. Range-gated imaging (RGI) is a direct active visualization technique using a highly sensitive image sensor and a high intensity illuminant. Currently, the range-gated imaging technique providing 2D and range image data is one of emerging active vision technologies. The range-gated imaging system gets vision information by summing time sliced vision images. In the RGI system, a high intensity illuminant illuminates for ultra-short time and a highly sensitive image sensor is gated by ultra-short exposure time to only get the illumination light. Here, the illuminant illuminates objects by flashing strong light through disturbance materials, such as smoke particles and dust particles. In contrast to passive conventional vision systems, the RGI active vision technology enables operation even in harsh environments like low-visibility smoky environment. In this paper, a compact range-gated vision system is developed to monitor structures in low-visibility environment. The system consists of illumination light, a range-gating camera and a control computer. Visualization experiments are carried out in low-visibility foggy environment to see imaging capability.

  20. When Visions for City Planning and Development are Translated into Practice

    DEFF Research Database (Denmark)

    Zapata Campos, Maria José; Zapata, Patrik

    The ‘knowing-doing’ gaps between policy goals and their outcome when implemented is of increasing concern both in practice and in research. This paper explores how the visions of a sustainable development and the corresponding planning are translated into practice; what aspects of visions and plans...... of the waste-pickers now are formally employed, and new housing for the informal settlement’s residents. The analysis is based on interviews, observations, workshop participations and document analysis; gathered from 2009 until 2012. It combines action net theory with the sociology of translation...... as theoretical framework. Despite the initial compliance to the program (funded and initially led by international aid organizations), local actors enacted a myriad of small acts of defiance and resistance that, without abruptly contesting the project, shaped it to better fit local needs; a) first by municipal...

  1. Development of a body motion interactive system with a weight voting mechanism and computer vision technology

    Science.gov (United States)

    Lin, Chern-Sheng; Chen, Chia-Tse; Shei, Hung-Jung; Lay, Yun-Long; Chiu, Chuang-Chien

    2012-09-01

    This study develops a body motion interactive system with computer vision technology. This application combines interactive games, art performing, and exercise training system. Multiple image processing and computer vision technologies are used in this study. The system can calculate the characteristics of an object color, and then perform color segmentation. When there is a wrong action judgment, the system will avoid the error with a weight voting mechanism, which can set the condition score and weight value for the action judgment, and choose the best action judgment from the weight voting mechanism. Finally, this study estimated the reliability of the system in order to make improvements. The results showed that, this method has good effect on accuracy and stability during operations of the human-machine interface of the sports training system.

  2. Development of VIPER: a simulator for assessing vision performance of warfighters

    Science.gov (United States)

    Familoni, Jide; Thompson, Roger; Moyer, Steve; Mueller, Gregory; Williams, Tim; Nguyen, Hung-Quang; Espinola, Richard L.; Sia, Rose K.; Ryan, Denise S.; Rivers, Bruce A.

    2016-05-01

    Background: When evaluating vision, it is important to assess not just the ability to read letters on a vision chart, but also how well one sees in real life scenarios. As part of the Warfighter Refractive Eye Surgery Program (WRESP), visual outcomes are assessed before and after refractive surgery. A Warfighter's ability to read signs and detect and identify objects is crucial, not only when deployed in a military setting, but also in their civilian lives. Objective: VIPER, a VIsion PERformance simulator was envisioned as actual video-based simulated driving to test warfighters' functional vision under realistic conditions. Designed to use interactive video image controlled environments at daytime, dusk, night, and with thermal imaging vision, it simulates the experience of viewing and identifying road signs and other objects while driving. We hypothesize that VIPER will facilitate efficient and quantifiable assessment of changes in vision and measurement of functional military performance. Study Design: Video images were recorded on an isolated 1.1 mile stretch of road with separate target sets of six simulated road signs and six objects of military interest, separately. The video footage were integrated with customdesigned C++ based software that presented the simulated drive to an observer on a computer monitor at 10, 20 or 30 miles/hour. VIPER permits the observer to indicate when a target is seen and when it is identified. Distances at which the observer recognizes and identifies targets are automatically logged. Errors in recognition and identification are also recorded. This first report describes VIPER's development and a preliminary study to establish a baseline for its performance. In the study, nine soldiers viewed simulations at 10 miles/hour and 30 miles/hour, run in randomized order for each participant seated at 36 inches from the monitor. Relevance: Ultimately, patients are interested in how their vision will affect their ability to perform daily

  3. Managing organizational DSS development in small manufacturing enterprise

    NARCIS (Netherlands)

    M.M.C. Tam (M. M C); W.W.C. Chung (W. W C); S. Yung (Sun); A.K. David (A.); K.B.C. Saxena (Kul Bhushan)

    1994-01-01

    textabstractA number of Hong Kong manufacturing companies have moved their production to the People's Republic of China while retaining their supporting functions (such as marketing, distribution, etc.) in Hong Kong. As a consequence, their mode of operation has become more complex and demands

  4. U.S. Offshore Wind Manufacturing and Supply Chain Development

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, Bruce [Navigant Consulting, Inc., Burlington, MA (United States)

    2013-02-22

    This report seeks to provide an organized, analytical approach to identifying and bounding uncertainties around offshore wind manufacturing and supply chain capabilities; projecting potential component-level supply chain needs under three demand scenarios; and identifying key supply chain challenges and opportunities facing the future U.S. market and current suppliers of the nation’s landbased wind market.

  5. Micro manufacturing techniques and applications

    CERN Document Server

    Du, Ruxu; Li, Zifu

    2013-01-01

    Micro/meso-scale manufacturing has been developed in research fields of machining, forming, materials and others, but its potential to industries are yet to be fully realized. The theme of the current volume was to build a bridge joining academic research and industrial needs in micro manufacturing. Among the 12 papers selected for publication are three keynote addresses onmicro and desktop factories for micro/meso-scale manufacturing applicationsand future visions, tissue cutting mechanics and applications for needlecore biopsy and guidance, and micro-texturing onto amorphous carbonmaterials

  6. [Historical Development of the Wool and Colour Plate Tests for Screening for Colour Vision Deficiencies in German Speaking Countries].

    Science.gov (United States)

    Kuchenbecker, J

    2017-07-01

    Colour vision is a complex visual function that can be affected by congenital and/or acquired disorders. The frequency of congenital colour vision deficiencies has been investigated in rail and navy staff since the 1870s. Various test methods have been developed. Wool tests, flor contrast tests and colour plate tests have been used. A published colour plate test, based on Stilling's pseudo-isochromatic plates in combination with a flor contrast test, has been a common screening method for colour vision testing in German-speaking countries. This test is intended to detect congenital and acquired colour vision deficiencies in a simple and safe manner. More modern options, such as Internet and tablet PC have technical limitations, but will increasingly be used for screening for colour vision deficiencies. Georg Thieme Verlag KG Stuttgart · New York.

  7. Development and Manufacture of Cost-Effective Composite Drill Pipe

    Energy Technology Data Exchange (ETDEWEB)

    James C. Leslie

    2008-12-31

    Advanced Composite Products and Technology, Inc. (ACPT) has developed composite drill pipe (CDP) that matches the structural and strength properties of steel drill pipe, but weighs less than 50 percent of its steel counterpart. Funding for the multiyear research and development of CDP was provided by the U.S. Department of Energy Office of Fossil Energy through the Natural Gas and Oil Projects Management Division at the National Energy Technology Laboratory (NETL). Composite materials made of carbon fibers and epoxy resin offer mechanical properties comparable to steel at less than half the weight. Composite drill pipe consists of a composite material tube with standard drill pipe steel box and pin connections. Unlike metal drill pipe, composite drill pipe can be easily designed, ordered, and produced to meet specific requirements for specific applications. Because it uses standard joint connectors, CDP can be used in lieu of any part of or for the entire steel drill pipe section. For low curvature extended reach, deep directional drilling, or ultra deep onshore or offshore drilling, the increased strength to weight ratio of CDP will increase the limits in all three drilling applications. Deceased weight will reduce hauling costs and increase the amount of drill pipe allowed on offshore platforms. In extreme extended reach areas and high-angle directional drilling, drilling limits are associated with both high angle (fatigue) and frictional effects resulting from the combination of high angle curvature and/or total weight. The radius of curvature for a hole as small as 40 feet (12.2 meters) or a build rate of 140 degrees per 100 feet is within the fatigue limits of specially designed CDP. Other properties that can be incorporated into the design and manufacture of composite drill pipe and make it attractive for specific applications are corrosion resistance, non-magnetic intervals, and abrasion resistance coatings. Since CDP has little or no electromagnetic force

  8. V1.6 Development of Advanced Manufacturing Technologies for Low Cost Hydrogen Storage Vessels

    Energy Technology Data Exchange (ETDEWEB)

    Leavitt, Mark; Lam, Patrick; Nelson, Karl M.; johnson, Brice A.; Johnson, Kenneth I.; Alvine, Kyle J.; Ruiz, Antonio; Adams, Jesse

    2012-10-01

    The goal of this project is to develop an innovative manufacturing process for Type IV high-pressure hydrogen storage vessels, with the intent to significantly lower manufacturing costs. Part of the development is to integrate the features of high precision AFP and commercial FW. Evaluation of an alternative fiber to replace a portion of the baseline fiber will help to reduce costs further.

  9. Optoelectronic stereoscopic device for diagnostics, treatment, and developing of binocular vision

    Science.gov (United States)

    Pautova, Larisa; Elkhov, Victor A.; Ovechkis, Yuri N.

    2003-08-01

    Operation of the device is based on alternative generation of pictures for left and right eyes on the monitor screen. Controller gives pulses on LCG so that shutter for left or right eye opens synchronously with pictures. The device provides frequency of switching more than 100 Hz, and that is why the flickering is absent. Thus, a separate demonstration of images to the left eye or to the right one in turn is obtained for patients being unaware and creates the conditions of binocular perception clsoe to natural ones without any additional separation of vision fields. LC-cell transfer characteristic coodination with time parameters of monitor screen has enabled to improve stereo image quality. Complicated problem of computer stereo images with LC-glasses is so called 'ghosts' - noise images that come to blocked eye. We reduced its influence by adapting stereo images to phosphor and LC-cells characteristics. The device is intended for diagnostics and treatment of stabismus, amblyopia and other binocular and stereoscopic vision impairments, for cultivating, training and developing of stereoscopic vision, for measurements of horizontal and vertical phoria, phusion reserves, the stereovision acuity and some else, for fixing central scotoma borders, as well as suppression scotoma in strabismus too.

  10. Development of an Automatic Testing Platform for Aviator’s Night Vision Goggle Honeycomb Defect Inspection

    Directory of Open Access Journals (Sweden)

    Bo-Lin Jian

    2017-06-01

    Full Text Available Due to the direct influence of night vision equipment availability on the safety of night-time aerial reconnaissance, maintenance needs to be carried out regularly. Unfortunately, some defects are not easy to observe or are not even detectable by human eyes. As a consequence, this study proposed a novel automatic defect detection system for aviator’s night vision imaging systems AN/AVS-6(V1 and AN/AVS-6(V2. An auto-focusing process consisting of a sharpness calculation and a gradient-based variable step search method is applied to achieve an automatic detection system for honeycomb defects. This work also developed a test platform for sharpness measurement. It demonstrates that the honeycomb defects can be precisely recognized and the number of the defects can also be determined automatically during the inspection. Most importantly, the proposed approach significantly reduces the time consumption, as well as human assessment error during the night vision goggle inspection procedures.

  11. Vision-based interaction

    CERN Document Server

    Turk, Matthew

    2013-01-01

    In its early years, the field of computer vision was largely motivated by researchers seeking computational models of biological vision and solutions to practical problems in manufacturing, defense, and medicine. For the past two decades or so, there has been an increasing interest in computer vision as an input modality in the context of human-computer interaction. Such vision-based interaction can endow interactive systems with visual capabilities similar to those important to human-human interaction, in order to perceive non-verbal cues and incorporate this information in applications such

  12. Manufacturing technology development for vacuum vessel and plasma facing components

    International Nuclear Information System (INIS)

    Laitinen, Arttu; Liimatainen, Jari; Hallila, Pentti

    2005-01-01

    Vacuum vessel and plasma facing components of the ITER construction including shield modules and primary first wall panels have great impact on the production costs and reliability of the installation. From the manufacturing technology point of view, accuracy of shape, properties of the various austenitic stainless steel/austenitic stainless steel interfaces or CuCrZr/austenitic stainless steel interfaces as well as those of the base materials are crucial for technical reliability of the construction. The current approach in plasma facing components has been utilisation of solid-HIP technology and solid-powder-HIP technology. Due to the large size of especially shield modules shape, control of the internal cavities and cooling channels is extremely demanding. This requires strict control of the raw materials and manufacturing parameters

  13. Latest developments in innovative manufacturing to combine nanotechnology with healthcare

    OpenAIRE

    Parhizkar, M.; Mahalingam, S.; Homer-Vanniasinkam, S.; Edirisinghe, M.

    2017-01-01

    Nanotechnology has become increasingly important in advancing the frontiers of many key areas of healthcare, for example, drug delivery and tissue engineering. To fully harness the many benefits of nanotechnology in healthcare, innovative manufacturing is necessary to mass produce nanoparticles and nanofibers, the two major types of nanofeatures currently sought after and of immense utilitarian value in healthcare. For example, nanoparticles are a key drug delivery enabler, the structural and...

  14. Post-Colonial Urban Development and Planning in Cyprus: Shifting Visions and Realities of Early Suburbia

    Directory of Open Access Journals (Sweden)

    Byron Ioannou

    2016-12-01

    Full Text Available The paper studies the evolution of early suburban neighbourhoods in the context of the post-colonial urban development and planning. The Planning Report of the colonial Government of Cyprus in 1959 examines the foundations of urban development in Cyprus and at the same time implies a surprisingly sustainable vision for the future of planning. Despite this early intentions and guidance, the urban districts developed far from being sustainable under widely accepted criteria and indicators (participation, effectiveness of planning and development control, sprawl, character and identity, green. The basic hypothesis is that planning has proved insufficient in providing rational urban development. The paper outlines the roots of the planning shortcomings during the last fifty years. British perceptions on planning of the first half of the 20th century influenced the 1959 Report, which affected, in turns, the legislation which followed. It is explained why development constrains and land market restrictions prevented the implementation of rational key ideas, and sustainable visions throughout the years. The paper concludes in attempting to visualize these dynamic processes at the early suburban neighbourhoods and measure distortions on densities, green spaces and layouts by taking an early suburban district as a case study.

  15. Heuristics in primary care for recognition of unreported vision loss in older people: a technology development study.

    Science.gov (United States)

    Wijeyekoon, Skanda; Kharicha, Kalpa; Iliffe, Steve

    2015-09-01

    To evaluate heuristics (rules of thumb) for recognition of undetected vision loss in older patients in primary care. Vision loss is associated with ageing, and its prevalence is increasing. Visual impairment has a broad impact on health, functioning and well-being. Unrecognised vision loss remains common, and screening interventions have yet to reduce its prevalence. An alternative approach is to enhance practitioners' skills in recognising undetected vision loss, by having a more detailed picture of those who are likely not to act on vision changes, report symptoms or have eye tests. This paper describes a qualitative technology development study to evaluate heuristics for recognition of undetected vision loss in older patients in primary care. Using a previous modelling study, two heuristics in the form of mnemonics were developed to aid pattern recognition and allow general practitioners to identify potential cases of unreported vision loss. These heuristics were then analysed with experts. Findings It was concluded that their implementation in modern general practice was unsuitable and an alternative solution should be sort.

  16. The development and manufacture of wood composite wind turbine rotors

    Science.gov (United States)

    Zuteck, M. D.

    1982-01-01

    The physical properties, operational experience, and construction methods of the wood/epoxy composite MOD 0A wind turbine blades are considered. Blades of this type have accumulated over 10,000 hours of successful operation at the Kahuku, Hawaii and Block Island, Rhode Island test sites. That body of experience is summarized and related to the structural concepts and design drivers which motivated the original design and choice of interior layout. Actual manufacturing experience and associated low first unit costs for these blades, as well as projections for high production rates, are presented. Application of these construction techniques to a wide range of other blade sizes is also considered.

  17. DEVELOPMENT AND INFLUENCE OF SPEED POWER ON RESULTS PROGRESSION OF LOW VISION JAVELIN THROWERS

    Directory of Open Access Journals (Sweden)

    Milan Matić

    2013-07-01

    Full Text Available Power is a motor skill important for low vision javelin throwers. The motor skill development (power, speed, endurance etc. linked to the fact that javelin is the lightest throwing device, we come to conclusion that the result in this discipline depends much more on the speed and flexibility than on the power. Nevertheless, development of speed power significantly influences the acquiring of good results in above mentioned discipline. While working with low vision sportsmen the attention should be focused on possible limitations in training of power that could be determined by some kind of illness or injury primarly caused the low vision. Experimental method od survey based on one sample was applied (case study. Equipment used in the experiments were adjusted to the needs, age and level of condition of examinee- Grlica Miloš (current European Record Breaker, 3rd on the World’s Championship 2012 in New Zealand, discipline of javlin throwing, category F12. The survey consisted of two-months cycle in the period from 01/04/2012 until 01/06/2012 as a part of preparation for Paralympic Games in London 2012. Measured variables include: 5kg ball throwing in front and above, standing long jump, 4kg ball throwing exercise aut. Based on the applied tests a conclusion can be made that the impact of force on acquiring better results, in this discipline, is very strong. Regardless the acquired results, in our opinion too big and too fast improvement in this area of physical preparation can be contraproductive due to the occurence of inadequate movements in joints which are esential for the discipline. Power development is definitely crucial segment in modeling of training process for javelin throwers. There are many surveys and articles about this topic but very little focusing on disabled people. Future work should examine special characteristics and differences regarding this population.

  18. A framework for development of an intelligent system for design and manufacturing of stamping dies

    Science.gov (United States)

    Hussein, H. M. A.; Kumar, S.

    2014-07-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

  19. A framework for development of an intelligent system for design and manufacturing of stamping dies

    International Nuclear Information System (INIS)

    Hussein, H M A; Kumar, S

    2014-01-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software

  20. The Manufacturing Engineering Department of the Future

    DEFF Research Database (Denmark)

    Alting, Leo

    1998-01-01

    When discussing manufacturing engineering education you always end up discussing curricula development, course design, specific topics to be taught, etc. Very rarely it is discussed, how a manufacturing engineering department ought to be designed to create an attractive environment for students...... and the requirements to the products/services identified. The organisation necessary to develop the department is outlined as well as the process to implement the vision....

  1. The Development of High Temperature Thermoplastic Composite Materials for Additive Manufactured Autoclave Tooling

    Energy Technology Data Exchange (ETDEWEB)

    Kunc, Vlastimil [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Duty, Chad E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lindahl, John M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hassen, Ahmed A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-08-01

    In this work, ORNL and Techmer investigated and screened different high temperature thermoplastic reinforced materials to fabricate composite molds for autoclave processes using Additive Manufacturing (AM) techniques. This project directly led to the development and commercial release of two printable, high temperature composite materials available through Techmer PM. These new materials are targeted for high temperature tooling made via large scale additive manufacturing.

  2. Development of contour scanning parameters to improve surface finishing of additive manufactured parts

    CSIR Research Space (South Africa)

    Hoosain, Shaik

    2017-10-01

    Full Text Available Additive manufacturing (AM), widely known as 3D printing, is a method of manufacturing that forms parts from powder, wire or sheets in a process that proceeds layer by layer. Many techniques have been developed to accomplish this via melting...

  3. Development of iFab (Instant Foundry Adaptive Through Bits) Manufacturing Process and Machine Library

    Science.gov (United States)

    2012-08-01

    input shaft , pump, gearbox, rack & pinion… Wheel assy wheel, tire, drive hub, lug, spindle , bearing… Braking brake disc/drum, caliper, friction...processes and associated machines is provided. Progress with respect to Task 3 (to design and develop the Manufacturing Capability Modeling Environment...of Military Ground Vehicle Design , Materials, and Processes ............... 4 4.2 Task 2 Manufacturing Knowledge Characterization

  4. Two-Phase Flow Technology Developed and Demonstrated for the Vision for Exploration

    Science.gov (United States)

    Sankovic, John M.; McQuillen, John B.; Lekan, Jack F.

    2005-01-01

    NASA s vision for exploration will once again expand the bounds of human presence in the universe with planned missions to the Moon and Mars. To attain the numerous goals of this vision, NASA will need to develop technologies in several areas, including advanced power-generation and thermal-control systems for spacecraft and life support. The development of these systems will have to be demonstrated prior to implementation to ensure safe and reliable operation in reduced-gravity environments. The Two-Phase Flow Facility (T(PHI) FFy) Project will provide the path to these enabling technologies for critical multiphase fluid products. The safety and reliability of future systems will be enhanced by addressing focused microgravity fluid physics issues associated with flow boiling, condensation, phase separation, and system stability, all of which are essential to exploration technology. The project--a multiyear effort initiated in 2004--will include concept development, normal-gravity testing (laboratories), reduced gravity aircraft flight campaigns (NASA s KC-135 and C-9 aircraft), space-flight experimentation (International Space Station), and model development. This project will be implemented by a team from the NASA Glenn Research Center, QSS Group, Inc., ZIN Technologies, Inc., and the Extramural Strategic Research Team composed of experts from academia.

  5. Development of the Triple Theta assembly station with machine vision feedback

    International Nuclear Information System (INIS)

    Schmidt, Derek William

    2008-01-01

    Increased requirements for tighter tolerances on assembled target components in complex three-dimensional geometries with only days to assemble complete campaigns require the implementation of a computer-controlled high-precision assembly station. Over the last year, an 11-axis computer-controlled assembly station has been designed and built with custom software to handle the multiple coordinate systems and automatically calculate all relational positions. Preliminary development efforts have also been done to explore the benefit of a machine vision feedback module with a dual-camera viewing system to automate certain basic features like crosshair calibration, component leveling, and component centering.

  6. Integrating computation into the undergraduate curriculum: A vision and guidelines for future developments

    Science.gov (United States)

    Chonacky, Norman; Winch, David

    2008-04-01

    There is substantial evidence of a need to make computation an integral part of the undergraduate physics curriculum. This need is consistent with data from surveys in both the academy and the workplace, and has been reinforced by two years of exploratory efforts by a group of physics faculty for whom computation is a special interest. We have examined past and current efforts at reform and a variety of strategic, organizational, and institutional issues involved in any attempt to broadly transform existing practice. We propose a set of guidelines for development based on this past work and discuss our vision of computationally integrated physics.

  7. Development of Self-Luminous Glass Tube (SLGT) Manufacturing Technology

    International Nuclear Information System (INIS)

    Kim, Kwang Sin; Kim, Kyeong Sook; Chung, Eun Su; Song, Kyu Min; Lee, Sook Kyung; Son, Soon Hwan

    2005-01-01

    Tritium produced from the Wolsong Tritium Removal Facility (WTRF) will be a radioactive waste when it is stored in the vault inside the WTRF, which requires maintenance cost and is a troublesome waste such that it cannot be sent to the radioactive waste disposal facility. However, when tritium is utilized it can be valuable resource for many applications. As a starting point to utilize tritium we tried to domesticate the selfluminous glass tube (SLGT) manufacturing technology. As a hydrogen isotope, tritium has similar chemical properties to hydrogen but slightly different physical properties. Due to its unstable nature, tritium emits beta rays, which are streams of electrons, with 0∼18.6 keV (5.7 keV in average) energies and 12.323 years of a half-life. The energy level of tritium is relatively low and the biological effects of tritium to the human body are not significant, which makes tritium a popular radioactive isotope for use in industries. The electrons in a beta ray collide with phosphor to produce light so that tritium sealed in phosphor coated glass tubes can make the tubes glow without an external supply of energy. To manufacture these SLGTs, 4 core technologies are needed: coating technology, tritium injection technology, laser sealing/cutting technology and tritium handling technology

  8. Evaluation of Two Robot Vision Control Algorithms Developed Based on N-R and EKG Methods for Slender Bar Placement

    Energy Technology Data Exchange (ETDEWEB)

    Son, Jae Kyung; Jang, Wan Shik; Hong, Sung Mun [Gwangju (Korea, Republic of)

    2013-04-15

    Many problems need to be solved before vision systems can actually be applied in industry, such as the precision of the kinematics model of the robot control algorithm based on visual information, active compensation of the camera's focal length and orientation during the movement of the robot, and understanding the mapping of the physical 3-D space into 2-D camera coordinates. An algorithm is proposed to enable robot to move actively even if the relative positions between the camera and the robot is unknown. To solve the correction problem, this study proposes vision system model with six camera parameters. To develop the robot vision control algorithm, the N-R and EKG methods are applied to the vision system model. Finally, the position accuracy and processing time of the two algorithms developed based based on the EKG and the N-R methods are compared experimentally by making the robot perform slender bar placement task.

  9. Evaluation of Two Robot Vision Control Algorithms Developed Based on N-R and EKG Methods for Slender Bar Placement

    International Nuclear Information System (INIS)

    Son, Jae Kyung; Jang, Wan Shik; Hong, Sung Mun

    2013-01-01

    Many problems need to be solved before vision systems can actually be applied in industry, such as the precision of the kinematics model of the robot control algorithm based on visual information, active compensation of the camera's focal length and orientation during the movement of the robot, and understanding the mapping of the physical 3-D space into 2-D camera coordinates. An algorithm is proposed to enable robot to move actively even if the relative positions between the camera and the robot is unknown. To solve the correction problem, this study proposes vision system model with six camera parameters. To develop the robot vision control algorithm, the N-R and EKG methods are applied to the vision system model. Finally, the position accuracy and processing time of the two algorithms developed based based on the EKG and the N-R methods are compared experimentally by making the robot perform slender bar placement task

  10. Industrial vision

    DEFF Research Database (Denmark)

    Knudsen, Ole

    1998-01-01

    This dissertation is concerned with the introduction of vision-based application s in the ship building industry. The industrial research project is divided into a natural seq uence of developments, from basic theoretical projective image generation via CAD and subpixel analysis to a description...... is present ed, and the variability of the parameters is examined and described. The concept of using CAD together with vision information is based on the fact that all items processed at OSS have an associated complete 3D CAD model that is accessible at all production states. This concept gives numerous...... possibilities for using vision in applications which otherwise would be very difficult to automate. The requirement for low tolerances in production is, despite the huge dimensions of the items involved, extreme. This fact makes great demands on the ability to do robust sub pixel estimation. A new method based...

  11. An updated methodology to review developing-country vaccine manufacturer viability.

    Science.gov (United States)

    Luter, Nicholas; Kumar, Ritu; Hozumi, Dai; Lorenson, Tina; Larsen, Shannon; Gowda, Bhavya; Batson, Amie

    2017-07-05

    In 1997, Milstien, Batson, and Meaney published "A Systematic Method for Evaluating the Potential Viability of Local Vaccine Producers." The paper identified characteristics of successful vaccine manufacturers and developed a viability framework to evaluate their performance. This paper revisits the original study after two decades to determine the ability of the framework to predict manufacturer success. By reconstructing much of the original dataset and conducting in-depth interviews, the authors developed informed views on the continued viability of manufacturers in low- and middle-income country markets. Considering the marked changes in the market and technology landscape since 1997, the authors find the viability framework to be predictive and a useful lens through which to evaluate manufacturer success or failure. Of particular interest is how incumbent and potentially new developing-country vaccine manufacturers enter and sustain production in competitive international markets and how they integrate (or fail to integrate) new technology into the production process. Ultimately, most manufacturers will need to meet global quality standards to be viable. As governments and donors consider investments in vaccine producers, the updated viability factors will be a useful tool in evaluating the prospects of manufacturers over the mid to long term. The paper emphasizes that while up-front investments are important, other critical factors-including investments in a national regulatory authority, manufacturer independence, and ability to adapt and adopt new technology-are necessary to ensure viability. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

  12. Which visual sight skill tested and developed the interaction between central and peripheral vision case duels dribbling soccer skills

    Directory of Open Access Journals (Sweden)

    Zerf Mohammed

    2016-09-01

    Full Text Available The present paper analyses the effects of visual keep sight to test and develop the interaction between central and peripheral vision the case of duels dribbling among soccer under 17 years. Where This research aims to propose a method evaluating and coaching this skill in the absence of laboratory tests and virtual visual exercises as a way for Algerian coaches to control the progress of their players. From the principle that the team which wins the most duels has the best chance of winning the game. [1] Our research supports the hypothesis which confirms in one hand that Dynamic visual acuity is the combine between Peripheral and Central vision to have one eye on the ball and the other on the defined [2] . While some authors confirm that the Top-class football players do not watch their steps, but dribble with their heads up [3]. Whereas Previous studies confirm estimate of distance ball foot player is the strategy to master this skill [4] which requires the involvement of the commitment of peripheral vision for information and central vision to master the ball [5]. From the proof and results statistics applied in the current study, we confirm that narrow spaces require the interaction of central vision than peripheral vision. Otherwise, free spaces require peripheral vision than the central vision. Which leaves us to confirm that peripheral vision in the limited space [6] can suffer because the player needs to pay close attention to each contact with the ball [7].

  13. Development of an auto-welding system for CRD nozzle repair welds using a 3D laser vision sensor

    International Nuclear Information System (INIS)

    Park, K.; Kim, Y.; Byeon, J.; Sung, K.; Yeom, C.; Rhee, S.

    2007-01-01

    A control rod device (CRD) nozzle attaches to the hemispherical surface of a reactor head with J-groove welding. Primary water stress corrosion cracking (PWSCC) causes degradation in these welds, which requires that these defect areas be repaired. To perform this repair welding automatically on a complicated weld groove shape, an auto-welding system was developed incorporating a laser vision sensor that measures the 3-dimensional (3D) shape of the groove and a weld-path creation program that calculates the weld-path parameters. Welding trials with a J-groove workpiece were performed to establish a basis for developing this auto-welding system. Because the reactor head is placed on a lay down support, the outer-most region of the CRD nozzle has restricted access. Due to this tight space, several parameters of the design, such as size, weight and movement of the auto-welding system, had to be carefully considered. The cross section of the J-groove weld is basically an oval shape where the included angle of the J-groove ranges from 0 to 57 degrees. To measure the complex shape, we used double lasers coupled to a single charge coupled device (CCD) camera. We then developed a program to generate the weld-path parameters using the measured 3D shape as a basis. The program has the ability to determine the first and final welding positions and to calculate all weld-path parameters. An optimized image-processing algorithm was applied to resolve noise interference and diffused reflection of the joint surfaces. The auto-welding system is composed of a 4-axis manipulator, gas tungsten arc welding (GTAW) power supply, an optimized designed and manufactured GTAW torch and a 3D laser vision sensor. Through welding trials with 0 and 38-degree included-angle workpieces with both J-groove and U-groove weld, the performance of this auto-welding system was qualified for field application

  14. Artificial vision in nuclear fuel fabrication

    International Nuclear Information System (INIS)

    Dorado, P.

    2007-01-01

    The development of artificial vision techniques opens a door to the optimization of industrial processes which the nuclear industry cannot miss out on. Backing these techniques represents a revolution in security and reliability in the manufacturing of a highly technological products as in nuclear fuel. Enusa Industrias Avanzadas S. A. has successfully developed and implemented the first automatic inspection equipment for pellets by artificial vision in the European nuclear industry which is nowadays qualified and is already developing the second generation of this machine. There are many possible applications for the techniques of artificial vision in the fuel manufacturing processes. Among the practices developed by Enusa Industrias Avanzadas are, besides the pellets inspection, the rod sealing drills detection and positioning in the BWR products and the sealing drills inspection in the PWR fuel. The use of artificial vision in the arduous and precise processes of full inspection will allow the absence of human error, the increase of control in the mentioned procedures, the reduction of doses received by the personnel, a higher reliability of the whole of the operations and an improvement in manufacturing costs. (Author)

  15. An Introduction to Intelligent Processing Programs Developed by the Air Force Manufacturing Technology Directorate

    Science.gov (United States)

    Sampson, Paul G.; Sny, Linda C.

    1992-01-01

    The Air Force has numerous on-going manufacturing and integration development programs (machine tools, composites, metals, assembly, and electronics) which are instrumental in improving productivity in the aerospace industry, but more importantly, have identified strategies and technologies required for the integration of advanced processing equipment. An introduction to four current Air Force Manufacturing Technology Directorate (ManTech) manufacturing areas is provided. Research is being carried out in the following areas: (1) machining initiatives for aerospace subcontractors which provide for advanced technology and innovative manufacturing strategies to increase the capabilities of small shops; (2) innovative approaches to advance machine tool products and manufacturing processes; (3) innovative approaches to advance sensors for process control in machine tools; and (4) efforts currently underway to develop, with the support of industry, the Next Generation Workstation/Machine Controller (Low-End Controller Task).

  16. Space Technology Mission Directorate Game Changing Development Program FY2015 Annual Program Review: Advanced Manufacturing Technology

    Science.gov (United States)

    Vickers, John; Fikes, John

    2015-01-01

    The Advance Manufacturing Technology (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of the Initiative is the Advanced Manufacturing National Program Office (AMNPO), which includes participation from all federal agencies involved in U.S. manufacturing. In support of the AMNPO the AMT Project supports building and Growing the National Network for Manufacturing Innovation through a public-private partnership designed to help the industrial community accelerate manufacturing innovation. Integration with other projects/programs and partnerships: STMD (Space Technology Mission Directorate), HEOMD, other Centers; Industry, Academia; OGA's (e.g., DOD, DOE, DOC, USDA, NASA, NSF); Office of Science and Technology Policy, NIST Advanced Manufacturing Program Office; Generate insight within NASA and cross-agency for technology development priorities and investments. Technology Infusion Plan: PC; Potential customer infusion (TDM, HEOMD, SMD, OGA, Industry); Leverage; Collaborate with other Agencies, Industry and Academia; NASA roadmap. Initiatives include: Advanced Near Net Shape Technology Integrally Stiffened Cylinder Process Development (launch vehicles, sounding rockets); Materials Genome; Low Cost Upper Stage-Class Propulsion; Additive Construction with Mobile Emplacement (ACME); National Center for Advanced Manufacturing.

  17. Operational Based Vision Assessment Automated Vision Test Collection User Guide

    Science.gov (United States)

    2017-05-15

    AFRL-SA-WP-SR-2017-0012 Operational Based Vision Assessment Automated Vision Test Collection User Guide Elizabeth Shoda, Alex...June 2015 – May 2017 4. TITLE AND SUBTITLE Operational Based Vision Assessment Automated Vision Test Collection User Guide 5a. CONTRACT NUMBER... automated vision tests , or AVT. Development of the AVT was required to support threshold-level vision testing capability needed to investigate the

  18. The human dorsal action control system develops in the absence of vision.

    Science.gov (United States)

    Fiehler, Katja; Burke, Michael; Bien, Siegfried; Röder, Brigitte; Rösler, Frank

    2009-01-01

    The primate dorsal pathway has been proposed to compute vision for action. Although recent findings suggest that dorsal pathway structures contribute to somatosensory action control as well, it is yet not clear whether or not the development of dorsal pathway functions depends on early visual experience. Using functional magnetic resonance imaging, we investigated the pattern of cortical activation in congenitally blind and matched blindfolded sighted adults while performing kinesthetically guided hand movements. Congenitally blind adults activated similar dorsal pathway structures as sighted controls. Group-specific activations were found in the extrastriate cortex and the auditory cortex for congenitally blind humans and in the precuneus and the presupplementary motor area for sighted humans. Dorsal pathway activity was in addition observed for working memory maintenance of kinesthetic movement information in both groups. Thus, the results suggest that dorsal pathway functions develop in the absence of vision. This favors the idea of a general mechanism of movement control that operates regardless of the sensory input modality. Group differences in cortical activation patterns imply different movement control strategies as a function of visual experience.

  19. VISION, STRATEGY AND ACTION PLAN FOR SHELLFISH FARMING DEVELOPMENT IN THE KRKA RIVER ESTUARY

    Directory of Open Access Journals (Sweden)

    Drago Maguš

    2009-10-01

    Full Text Available In this paper are presented the vision, strategic guidelines/measures and the action plan for shellfish farming development in the Krka river estuary. They came as a result from several discussions that were held with shellfish farmers of the estuary area in year 2008 while writing the Integrated Plan for Shellfish Farming for Krka Estuary Area, which was realized in the framework of the Green Business Support Programme (UNDP COST Project — Conservation, and Sustainable Use of Biodiversity in the Dalmatian Coast through Greening Coastal Development. For a short–term, a considerable impetus for the development of shellfish farming in the Krka river estuary could be the construction of common distribution and purification center, building of warehouse for shellfish farming equipment, and providing work space for the preparation of the equipment as well as the space for waste disposal; for a long–term it could be building of shellfish hatchery at the location of Martinska marine station.

  20. Development work for the manufacture of a blanket shield prototype for ITER

    International Nuclear Information System (INIS)

    Boireau, B.; Boudot, C.; Cottin, A.; Lorenzetto, P.; Jacquinot, F.; Bucci, P.; Gillia, O.; Vidotto, F.

    2006-01-01

    In the frame of the blanket development for ITER, an R-and-D programme was implemented for the manufacture of a shield prototype by powder Hot Isostatic Pressing (HIPping). The shield consists of a Stainless steel forged block drilled and machined, at the back of which 3D bent tubes are HIPped inside a powder layer. This paper describes the development work through the manufacturing of several mock ups that leads us to be confident for the shield prototype manufacturing. The paper is divided into 2 parts, the first one related to the machining development and validation, the second one relating to the HIP development and validation. A partial full scale mock up for the machining development (machined PFSMU) was manufactured with no particular problems, all the main identified difficulties in machining like deep drilling and castellation machining where overcome and the mock up was conform to the specification. The manufacturing of a HIPped PFSMU for the HIP development was done after the manufacturing of smaller mock-ups each representing a particular detailed design point. A computer simulation work gave us some design recommendation, and the compared analysis of the numerical simulation and experimental results lead us to predict the distortions on the PFSMU HIPped mock up. The HIPped distortions that were the main uncertainty were assessed through small mock ups and bigger one. The mechanical characteristics of the joints are conform to the specification. Associated to the mock up manufacturing is the ultrasonic test development which consists in designing and manufacturing a miniaturized probe travelling inside the bent tube after the HIP cycle to examine the joint tube / powder among others. This ultrasonic development allowed the examination of the HIPped PFSMU mock up that concluded this development work. (author)

  1. Robot Vision Library

    Science.gov (United States)

    Howard, Andrew B.; Ansar, Adnan I.; Litwin, Todd E.; Goldberg, Steven B.

    2009-01-01

    The JPL Robot Vision Library (JPLV) provides real-time robot vision algorithms for developers who are not vision specialists. The package includes algorithms for stereo ranging, visual odometry and unsurveyed camera calibration, and has unique support for very wideangle lenses

  2. Low Vision

    Science.gov (United States)

    ... USAJobs Home » Statistics and Data » Low Vision Listen Low Vision Low Vision Defined: Low Vision is defined as the best- ... Ethnicity 2010 U.S. Age-Specific Prevalence Rates for Low Vision by Age, and Race/Ethnicity Table for 2010 ...

  3. 21ST Century Manufacturing Enterprise Strategy Report

    Science.gov (United States)

    1992-01-01

    Association for Manufacturing Excellence, Wheeling, Illinois, 28 p. 142. Hamel, G.; Prahalad , C.K. (1989): " Strategic Intent ". Harvard Business...counsel of over 150 people from 77 companies and I1I professional organizations in developing their strategic enterprise plan. The group strongly...Understand the strategic implications of manufacturing technology for the corporation (4) Have a vision of the future competitiveness needs of industry in

  4. Development of the method of aggregation to determine the current storage area using computer vision and radiofrequency identification

    Science.gov (United States)

    Astafiev, A.; Orlov, A.; Privezencev, D.

    2018-01-01

    The article is devoted to the development of technology and software for the construction of positioning and control systems in industrial plants based on aggregation to determine the current storage area using computer vision and radiofrequency identification. It describes the developed of the project of hardware for industrial products positioning system in the territory of a plant on the basis of radio-frequency grid. It describes the development of the project of hardware for industrial products positioning system in the plant on the basis of computer vision methods. It describes the development of the method of aggregation to determine the current storage area using computer vision and radiofrequency identification. Experimental studies in laboratory and production conditions have been conducted and described in the article.

  5. INDUSTRIAL LAND DEVELOPMENT AND MANUFACTURING DECONCENTRATION IN GREATER JAKARTA

    NARCIS (Netherlands)

    Hudalah, Delik; Viantari, Dimitra; Firman, Tommy; Woltjer, Johan

    2013-01-01

    Industrial land development has become a key feature of urbanization in Greater Jakarta, one of the largest metropolitan areas in Southeast Asia. Following Suharto's market-oriented policy measures in the late 1980s, private developers have dominated the land development projects in Greater Jakarta.

  6. Product Development in Micro and Nano Manufacturing - The Challenge of the Future

    DEFF Research Database (Denmark)

    Alting, Leo; Hansen, Hans Nørgaard

    2003-01-01

    The development and design of micro and nano products becomes a more and more important issue. Many new technologies are developed these years and they create many visions for new products and applications. If these visions are to be transformed into industrial products on a larger scale...... it is very important that: • both the product driven and technology driven approach are used. • in the product driven approach methodologies and principles in design of micro products must be developed – both related to next generation of products and future generations. • in the technology driven approach...... a continuous development of materials and processes is promoted supporting the new design principles. New design principles as well as improved materials and technologies are necessary to realize the industrial potentials which are linked to mass production principles and low cost....

  7. Nanoimprint system development and status for high volume semiconductor manufacturing

    Science.gov (United States)

    Hiura, Hiromi; Takabayashi, Yukio; Takashima, Tsuneo; Emoto, Keiji; Choi, Jin; Schumaker, Phil

    2016-10-01

    Imprint lithography has been shown to be an effective technique for replication of nano-scale features. Jet and Flash Imprint Lithography* (J-FIL*) involves the field-by-field deposition and exposure of a low viscosity resist deposited by jetting technology onto the substrate. The patterned mask is lowered into the fluid which then quickly flows into the relief patterns in the mask by capillary action. Following this filling step, the resist is crosslinked under UV radiation, and then the mask is removed, leaving a patterned resist on the substrate. There are many criteria that determine whether a particular technology is ready for wafer manufacturing. For imprint lithography, recent attention has been given to the areas of overlay, throughput, defectivity, and mask replication. This paper reviews progress in these critical areas. Recent demonstrations have proven that mix and match overlay of less than 5nm can achieved. Further reductions require a higher order correction system. Modeling and experimental data are presented which provide a path towards reducing the overlay errors to less than 3nm. Throughput is mainly impacted by the fill time of the relief images on the mask. Improvement in resist materials provides a solution that allows 15 wafers per hour per station, or a tool throughput of 60 wafers per hour. Defectivity and mask life play a significant role relative to meeting the cost of ownership (CoO) requirements in the production of semiconductor devices. Hard particles on a wafer or mask create the possibility of inducing a permanent defect on the mask that can impact device yield and mask life. By using material methods to reduce particle shedding and by introducing an air curtain system, the lifetime of both the master mask and the replica mask can be extended. In this work, we report results that demonstrate a path towards achieving mask lifetimes of better than 1000 wafers. Finally, on the mask side, a new replication tool, the FPA-1100NR2 is

  8. Machine Vision Handbook

    CERN Document Server

    2012-01-01

    The automation of visual inspection is becoming more and more important in modern industry as a consistent, reliable means of judging the quality of raw materials and manufactured goods . The Machine Vision Handbook  equips the reader with the practical details required to engineer integrated mechanical-optical-electronic-software systems. Machine vision is first set in the context of basic information on light, natural vision, colour sensing and optics. The physical apparatus required for mechanized image capture – lenses, cameras, scanners and light sources – are discussed followed by detailed treatment of various image-processing methods including an introduction to the QT image processing system. QT is unique to this book, and provides an example of a practical machine vision system along with extensive libraries of useful commands, functions and images which can be implemented by the reader. The main text of the book is completed by studies of a wide variety of applications of machine vision in insp...

  9. 3D metal droplet printing development and advanced materials additive manufacturing

    Directory of Open Access Journals (Sweden)

    Lawrence E. Murr

    2017-01-01

    Full Text Available While commercial additive manufacturing processes involving direct metal wire or powder deposition along with powder bed fusion technologies using laser and electron beam melting have proliferated over the past decade, inkjet printing using molten metal droplets for direct, 3D printing has been elusive. In this paper we review the more than three decades of development of metal droplet generation for precision additive manufacturing applications utilizing advanced, high-temperature metals and alloys. Issues concerning process optimization, including product structure and properties affected by oxidation are discussed and some comparisons of related additive manufactured microstructures are presented.

  10. NASA's Additive Manufacturing Development Materials Science to Technology Infusion - Connecting the Digital Dots

    Science.gov (United States)

    Vickers, John

    2017-01-01

    At NASA, the first steps of the Journey to Mars are well underway with the development of NASA's next generation launch system and investments in research and technologies that should increase the affordability, capability, and safety of exploration activities. Additive Manufacturing presents a disruptive opportunity for NASA to design and manufacture hardware with new materials at dramatically reduced cost and schedule. Opportunities to incorporate additive manufacturing align very well with NASA missions and with most NASA programs related to space, science, and aeronautics. The Agency also relies on many partnerships with other government agencies, industry and academia.

  11. Developing a data life cycle for carbon and greenhouse gas measurements: challenges, experiences and visions

    Science.gov (United States)

    Kutsch, W. L.

    2015-12-01

    Environmental research infrastructures and big data integration networks require common data policies, standardized workflows and sophisticated e-infrastructure to optimise the data life cycle. This presentation summarizes the experiences in developing the data life cycle for the Integrated Carbon Observation System (ICOS), a European Research Infrastructure. It will also outline challenges that still exist and visions for future development. As many other environmental research infrastructures ICOS RI built on a large number of distributed observational or experimental sites. Data from these sites are transferred to Thematic Centres and quality checked, processed and integrated there. Dissemination will be managed by the ICOS Carbon Portal. This complex data life cycle has been defined in detail by developing protocols and assigning responsibilities. Since data will be shared under an open access policy there is a strong need for common data citation tracking systems that allow data providers to identify downstream usage of their data so as to prove their importance and show the impact to stakeholders and the public. More challenges arise from interoperating with other infrastructures or providing data for global integration projects as done e.g. in the framework of GEOSS or in global integration approaches such as fluxnet or SOCAt. Here, common metadata systems are the key solutions for data detection and harvesting. The metadata characterises data, services, users and ICT resources (including sensors and detectors). Risks may arise when data of high and low quality are mixed during this process or unexperienced data scientists without detailed knowledge on the data aquisition derive scientific theories through statistical analyses. The vision of fully open data availability is expressed in a recent GEO flagship initiative that will address important issues needed to build a connected and interoperable global network for carbon cycle and greenhouse gas

  12. Quantum photoelectron effects in the eye retina and development of colour vision theory

    International Nuclear Information System (INIS)

    Kremkov, M.V.

    2011-01-01

    The quantum semiconductor mechanism of the colour vision of mans is created. The mechanism is based on quantum effects under influence of light waves exciting valence electrons in different microelement's atoms (Zn, Cu, Fe, Co, P, Br, Se, et al.) that are presented in the photoreceptor's cells of the eye retina (columns and retorts) with the quasi-periodical disks structure. The microelement concentrations correspond to the impurity atom amount in semiconductors, and the photoelectron's current passes out its signal to the vision nerve. The mechanism explains existence of the man colour-blindness, degradation of the vision sensitivity with the man's age and other peculiarities of the colour vision. (authors)

  13. An analytic framework for developing inherently-manufacturable pop-up laminate devices

    International Nuclear Information System (INIS)

    Aukes, Daniel M; Goldberg, Benjamin; Wood, Robert J; Cutkosky, Mark R

    2014-01-01

    Spurred by advances in manufacturing technologies developed around layered manufacturing technologies such as PC-MEMS, SCM, and printable robotics, we propose a new analytic framework for capturing the geometry of folded composite laminate devices and the mechanical processes used to manufacture them. These processes can be represented by combining a small set of geometric operations which are general enough to encompass many different manufacturing paradigms. Furthermore, such a formulation permits one to construct a variety of geometric tools which can be used to analyze common manufacturability concepts, such as tool access, part removability, and device support. In order to increase the speed of development, reduce the occurrence of manufacturing problems inherent with current design methods, and reduce the level of expertise required to develop new devices, the framework has been implemented in a new design tool called popupCAD, which is suited for the design and development of complex folded laminate devices. We conclude with a demonstration of utility of the tools by creating a folded leg mechanism. (paper)

  14. Manufacturing experience and perspectives of WWER nuclear fuel development

    International Nuclear Information System (INIS)

    Aksenov, P.; Kolosovskiy, V.

    2011-01-01

    The purposes of new shroudless working fuel assembly (PK-3) development, basic design peculiarities of working fuel assembly (PK-3) and the results of PK-3 implementation are presented in this paper. Values of 440.19.000-02 working fuel assembly with debris filter Burnup at Kola NPP unit 2 are given. The main issues settled in the course of TVSA-T implementation like: The development of the design and fabrication method of mixing grids; The development of the design and fabrication method of basic assemblies and components of TVSA-T, including fuel rods of new generation; and The obtainment of specified pellet microstructure with average grain size more than 25μm are listed. The development of the design and fabrication method of removable uprated headpiece of shortened length as well as the development of the design and fabrication method of a tailpiece equipped with a debris filter are also illustrated

  15. Development and validation of equations utilizing lamb vision system output to predict lamb carcass fabrication yields.

    Science.gov (United States)

    Cunha, B C N; Belk, K E; Scanga, J A; LeValley, S B; Tatum, J D; Smith, G C

    2004-07-01

    This study was performed to validate previous equations and to develop and evaluate new regression equations for predicting lamb carcass fabrication yields using outputs from a lamb vision system-hot carcass component (LVS-HCC) and the lamb vision system-chilled carcass LM imaging component (LVS-CCC). Lamb carcasses (n = 149) were selected after slaughter, imaged hot using the LVS-HCC, and chilled for 24 to 48 h at -3 to 1 degrees C. Chilled carcasses yield grades (YG) were assigned on-line by USDA graders and by expert USDA grading supervisors with unlimited time and access to the carcasses. Before fabrication, carcasses were ribbed between the 12th and 13th ribs and imaged using the LVS-CCC. Carcasses were fabricated into bone-in subprimal/primal cuts. Yields calculated included 1) saleable meat yield (SMY); 2) subprimal yield (SPY); and 3) fat yield (FY). On-line (whole-number) USDA YG accounted for 59, 58, and 64%; expert (whole-number) USDA YG explained 59, 59, and 65%; and expert (nearest-tenth) USDA YG accounted for 60, 60, and 67% of the observed variation in SMY, SPY, and FY, respectively. The best prediction equation developed in this trial using LVS-HCC output and hot carcass weight as independent variables explained 68, 62, and 74% of the variation in SMY, SPY, and FY, respectively. Addition of output from LVS-CCC improved predictive accuracy of the equations; the combined output equations explained 72 and 66% of the variability in SMY and SPY, respectively. Accuracy and repeatability of measurement of LM area made with the LVS-CCC also was assessed, and results suggested that use of LVS-CCC provided reasonably accurate (R2 = 0.59) and highly repeatable (repeatability = 0.98) measurements of LM area. Compared with USDA YG, use of the dual-component lamb vision system to predict cut yields of lamb carcasses improved accuracy and precision, suggesting that this system could have an application as an objective means for pricing carcasses in a value

  16. Impacts of Global Manufacturing Trends on Port Development: The Case of Hong Kong1

    Directory of Open Access Journals (Sweden)

    Abraham Zhang

    2015-03-01

    Full Text Available Global manufacturing trends may have profound implications for regional port development. This paper studies Hong Kong port (HKP, which has been one of the world's busiest container ports since the 1990s. In recent years, global manufacturers have started to move away from its primary cargo base, the Chinese Pearl River Delta. This study investigates impacts of the emerging global manufacturing trends on HKP development. It is found that relocation of manufacturing to Western Guangdong benefits HKP, while other relocation destinations make HKP less attractive or even irrelevant. Based on the findings, government policies are discussed that may be formulated to support the growth of the port and wider port-related economy.

  17. Design and Development of Vision Based Blockage Clearance Robot for Sewer Pipes

    Directory of Open Access Journals (Sweden)

    Krishna Prasad Nesaian

    2012-03-01

    Full Text Available Robotic technology is one of the advanced technologies, which is capable of completing tasks at situations where humans are unable to reach, see or survive. The underground sewer pipelines are the major tools for the transportation of effluent water. A lot of troubles caused by blockage in sewer pipe will lead to overflow of effluent water, sanitation problems. So robotic vehicle that is capable of traveling at underneath effluent water determining blockage using ultrasonic sensors and clearing by means of drilling mechanism is done. In addition to that wireless camera is fixed which acts as a robot vision by which we can monitor video and capture images using MATLAB tool. Thus in this project a prototype model of underground sewer pipe blockage clearance robot with drilling type will be developed

  18. Prototype development of educational program for production manager leading new perspectives on manufacturing technology

    OpenAIRE

    Ishii, Kazuyoshi; Ikeda, Hiroshi; Tsuchiya, Akinori; Shikida, Asami; Abe, Takehiko

    2006-01-01

    In this paper proposes the basic concept of an educational system and shows the result of educational program developed for manufacturing manager in leadership roles who wish to create new values in manufacturing technology. The basic concept combines an intelligent knowledge-based approach with the kaizen activity program in a framework of new value creation and comparative advantage models based on the ABC-G network (Academia, Business, Consultants, and Governmental officers). The education...

  19. Future directions for the development of Virtual Reality within an automotive manufacturer

    OpenAIRE

    Lawson, Glyn; Salanitri, Davide; Waterfield, Brian

    2016-01-01

    Virtual Reality (VR) can reduce time and costs, and lead to increases in quality, in the development of a product. Given the pressure on car companies to reduce time-to-market and to continually improve quality, the automotive industry has championed the use of VR across a number of applications, including design, manufacturing, and training. This paper describes interviews with 11 engineers and employees of allied disciplines from an automotive manufacturer about their current physical and ...

  20. A Review of Agile and Lean Manufacturing as Issues in Selected International and National Research and Development Programs and Roadmaps

    Science.gov (United States)

    Castro, Helio; Putnik, Goran D.; Shah, Vaibhav

    2012-01-01

    Purpose: The aim of this paper is to analyze international and national research and development (R&D) programs and roadmaps for the manufacturing sector, presenting how agile and lean manufacturing models are addressed in these programs. Design/methodology/approach: In this review, several manufacturing research and development programs and…

  1. DEVELOPMENT OF LOW-COST MANUFACTURING PROCESSES FOR PLANAR, MULTILAYER SOLID OXIDE FUEL CELL ELEMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Scott Swartz; Matthew Seabaugh; William Dawson; Harlan Anderson; Tim Armstrong; Michael Cobb; Kirby Meacham; James Stephan; Russell Bennett; Bob Remick; Chuck Sishtla; Scott Barnett; John Lannutti

    2004-06-12

    This report summarizes the results of a four-year project, entitled, ''Low-Cost Manufacturing Of Multilayer Ceramic Fuel Cells'', jointly funded by the U.S. Department of Energy, the State of Ohio, and by project participants. The project was led by NexTech Materials, Ltd., with subcontracting support provided by University of Missouri-Rolla, Michael A. Cobb & Co., Advanced Materials Technologies, Inc., Edison Materials Technology Center, Gas Technology Institute, Northwestern University, and The Ohio State University. Oak Ridge National Laboratory, though not formally a subcontractor on the program, supported the effort with separate DOE funding. The objective of the program was to develop advanced manufacturing technologies for making solid oxide fuel cell components that are more economical and reliable for a variety of applications. The program was carried out in three phases. In the Phase I effort, several manufacturing approaches were considered and subjected to detailed assessments of manufacturability and development risk. Estimated manufacturing costs for 5-kW stacks were in the range of $139/kW to $179/kW. The risk assessment identified a number of technical issues that would need to be considered during development. Phase II development work focused on development of planar solid oxide fuel cell elements, using a number of ceramic manufacturing methods, including tape casting, colloidal-spray deposition, screen printing, spin-coating, and sintering. Several processes were successfully established for fabrication of anode-supported, thin-film electrolyte cells, with performance levels at or near the state-of-the-art. The work in Phase III involved scale-up of cell manufacturing methods, development of non-destructive evaluation methods, and comprehensive electrical and electrochemical testing of solid oxide fuel cell materials and components.

  2. A child's vision.

    Science.gov (United States)

    Nye, Christina

    2014-06-01

    Implementing standard vision screening techniques in the primary care practice is the most effective means to detect children with potential vision problems at an age when the vision loss may be treatable. A critical period of vision development occurs in the first few weeks of life; thus, it is imperative that serious problems are detected at this time. Although it is not possible to quantitate an infant's vision, evaluating ocular health appropriately can mean the difference between sight and blindness and, in the case of retinoblastoma, life or death. Copyright © 2014 Elsevier Inc. All rights reserved.

  3. Convincing governments to act: VISION 2020 and the Millennium Development Goals

    Directory of Open Access Journals (Sweden)

    Hannah Faal

    2007-12-01

    Full Text Available Many countries have signed the declaration of VISION 2020: The Right to Sight and have established national committees for the prevention of blindness. However, some governments still need to be convinced to allocate the resources needed to achieve the objectives of VISION 2020.

  4. Convincing governments to act: VISION 2020 and the Millennium Development Goals

    OpenAIRE

    Faal, Hannah; Gilbert, Clare

    2007-01-01

    Many countries have signed the declaration of VISION 2020: The Right to Sight and have established national committees for the prevention of blindness. However, some governments still need to be convinced to allocate the resources needed to achieve the objectives of VISION 2020.

  5. Economic reform, energy, and development: the case of Mexican manufacturing

    International Nuclear Information System (INIS)

    Aguayo, Francisco; Gallagher, K.P.

    2005-01-01

    Given increasing concern over global climate change and national security there is a burgeoning interest in examining the relationship between economic growth and energy use in developed and developing countries. More specifically, decoupling energy use per unit of gross domestic product (GDP) has fast come to be seen as in the interests of national economies and the world as a whole. Recent attention has been paid to the dramatic decreases in the energy intensity of the Chinese economy, which fell by 55% between 1975 and 1995. Do other developing economies follow similar trajectories? This paper examines the energy intensity of the Mexican economy for the period 1988-1998. Although the long-term trend in Mexican energy intensity is rising, the energy intensity of the Mexican economy began to decline in 1988. This paper explores the factors that have contributed to this reduction. Diminishing Mexican energy use per unit of GDP has been driven by significant decreases in industrial energy intensity. We show that these changes have resulted from changes in the composition of Mexican industrial structure, and technological change

  6. Development of a virtual metrology for high-mix TFT-LCD manufacturing processes

    International Nuclear Information System (INIS)

    Chen Shan; Pan Tianhong; Jang Shishang

    2010-01-01

    Nowadays, TFT-LCD manufacturing has become a very complex process, in which many different products being manufactured with many different tools. The ability to predict the quality of product in such a high-mix system is critical to developing and maintaining a high yield. In this paper, a statistical method is proposed for building a virtual metrology model from a number of products using a high-mix manufacturing process. Stepwise regression is used to select 'key variables' that really affect the quality of the products. Multivariate analysis of covariance is also proposed for simultaneously applying the selected variables and product effect. This framework provides a systematic method of building a processing quality prediction system for a high-mix manufacturing process. The experimental results show that the proposed quality prognostic system can not only estimate the critical dimension accurately but also detect potentially faulty glasses.

  7. Development of a vision-based pH reading system

    Science.gov (United States)

    Hur, Min Goo; Kong, Young Bae; Lee, Eun Je; Park, Jeong Hoon; Yang, Seung Dae; Moon, Ha Jung; Lee, Dong Hoon

    2015-10-01

    pH paper is generally used for pH interpretation in the QC (quality control) process of radiopharmaceuticals. pH paper is easy to handle and useful for small samples such as radio-isotopes and radioisotope (RI)-labeled compounds for positron emission tomography (PET). However, pHpaper-based detecting methods may have some errors due limitations of eye sight and inaccurate readings. In this paper, we report a new device for pH reading and related software. The proposed pH reading system is developed with a vision algorithm based on the RGB library. The pH reading system is divided into two parts. First is the reading device that consists of a light source, a CCD camera and a data acquisition (DAQ) board. To improve the accuracy of the sensitivity, we utilize the three primary colors of the LED (light emission diode) in the reading device. The use of three colors is better than the use of a single color for a white LED because of wavelength. The other is a graph user interface (GUI) program for a vision interface and report generation. The GUI program inserts the color codes of the pH paper into the database; then, the CCD camera captures the pH paper and compares its color with the RGB database image in the reading mode. The software captures and reports information on the samples, such as pH results, capture images, and library images, and saves them as excel files.

  8. Manufacture of Third-Generation Lentivirus for Preclinical Use, with Process Development Considerations for Translation to Good Manufacturing Practice.

    Science.gov (United States)

    Gándara, Carolina; Affleck, Valerie; Stoll, Elizabeth Ann

    2018-02-01

    Lentiviral vectors are used in laboratories around the world for in vivo and ex vivo delivery of gene therapies, and increasingly clinical investigation as well as preclinical applications. The third-generation lentiviral vector system has many advantages, including high packaging capacity, stable gene expression in both dividing and post-mitotic cells, and low immunogenicity in the recipient organism. Yet, the manufacture of these vectors is challenging, especially at high titers required for direct use in vivo, and further challenges are presented by the process of translating preclinical gene therapies toward manufacture of products for clinical investigation. The goals of this paper are to report the protocol for manufacturing high-titer third-generation lentivirus for preclinical testing and to provide detailed information on considerations for translating preclinical viral vector manufacture toward scaled-up platforms and processes in order to make gene therapies under Good Manufacturing Practice that are suitable for clinical trials.

  9. Manufacturing of cells and stacks for SOFC development, test and demonstration projects and SOFC hotbox design development

    Energy Technology Data Exchange (ETDEWEB)

    2008-09-15

    The purpose of this project is to support the continued SOFC development through manufacturing process optimization and manufacturing of SOFC cells and stacks. These cells and stacks will serve as a necessary base for the development activities and for the establishment of a number of test and demonstration activities. The manufacture will also help provide operating experience and reduce manufacturing cost. Another main focus of the manufacturing is to assure technical improvements and reliability. It is imperative to the eventual success of the technology that test and demonstration is carried out in the pre-market conditions that will exist for the next years in the three market segments targeted by TOFC (Distributed generation, micro CHP and APU incl. marine APU). Finally, the project also includes development activities focusing on the stack-system interface (hotbox design development) and on dealing with transients and start up and shut down times, which is of particular importance for APU and micro CHP applications. Three topics are addressed:1) Cell manufacture, including production development, capacity lift and manuf. of cells for test and demonstration; 2) Stack manufacture and test, including a test facility, stack manuf. and test of stacks in a system at HCV; 3) Hotbox design development, including design, prototype construction and testing. The progress of this project is documented. Major achievements are successful manufacture of adequate amounts of cells and stacks according to the application. Furthermore significant over-performance in design, construction and test of a methanol based hotbox prototype as well as publication of this. (au)

  10. Man-machine interface: Description of recent developments by manufacturers

    International Nuclear Information System (INIS)

    Hessler, C.

    1995-01-01

    Two examples have been chosen (Staudinger NPP, unit 5, and Chooz B NPP) for illustrating characteristic features of screen-based control rooms in operation. Future development trends are: harmonisation and standardisation of hardware and software; integration of process control and operation control functions; novel visualisation concepts. The most visible progress in hardware development for future screen-based control rooms is the large-size screens for control rooms in addition to the smaller PC screens, which offer to the entire control room crew a full-scale view of plant behaviour at a glance. The next, logical advancements to come are for improved visualisation, as e.g. dynamic, coloured display of plant systems, or more abstract schematic, dynamic display of flowsheets of media and signals for information of operators, enhanced by pop-up video pictures of systems if requested. Integration of electronic operator manuals is realised to some extent and is continued, giving guidance on incident analysis supported by on-screen display, for accident management in NPP. The above tools will be installed in the control room of the EPR. The concept is to install redundant information tools, the system for every operator at the workplace, and a large-size system showing the entire plant systems for common information and coordination of operator response. Common-mode failures are planned to be prevented by complementary systems of a higher safety-engineering class. (orig./HP) [de

  11. Development of vitrification line technology and the manufacture of equipment

    International Nuclear Information System (INIS)

    Alexa, J.

    1989-01-01

    The development is described of technology and the production of equipment for the vitrification of liquid radioactive wastes. For vitrification, frit Frita F270 is used containing up to 20% titanium and featuring a corrosion effect lower by one order than that of lead glass. The liquid waste is discharged in a measuring tank where it is mixed with formic acid. It is then pumped into an evaporator. Breed vapor is carried via a condenser to a condensate tank. The evaporator concentrate is transported to a homogenizer where it is gradually mixed with Frita. The viscous mush thus produced is carried into a furnace where the remaining water is evaporated. The furnace decontamination factor is 10 2 to 10 3 . At a temperature of up to 1,050 degC the frit melts and is discharged into a case. Currently, technology has been developed of mush preparation and the design has been completed of a vitrification furnace featuring remote lid opening and closing, and of equipment for processing furnace emissions. (J.B.). 3 figs., 1 tab., 1 ref

  12. Development of Smart Active Layer Sensor (II): Manufacturing and Application

    International Nuclear Information System (INIS)

    Lee, Young Sup; Lee, Sang Il; Kwon, Jae Hwa; Yoon, Dong Jin

    2004-01-01

    This paper is the second part of the study on the development of a smart active layer (SAL) sensor, which consists of two parts. As mentioned in the first paper, structural health monitoring (SHM) is a new technology that is being increasingly applied at the industrial field as a potential approach to improve cost and convenience of structural inspection. Recently, the development of smart sensor is very active for real application. This study has focused on preparation and application study of SAL sensor which is described with regard to the theory and concept of the SAL sensor in the first paper. In order to detect elastic wave, smart piezoelectric sensor, SAL, is fabricated by using a piezoelectric element, shielding layer and protection layer. This protection layer plays an important role in a patched network of distributed piezoelectric sensor and shielding treatment. Four types of SAL sensor are designed/prepared/tested, and these details will be discussed in the paper In this study, SAL sensor ran be feasibly applied to perform structural health monitoring and to detect damage sources which result in elastic waves

  13. The Effect of Prenatal and Childhood Development on Hearing, Vision and Cognition in Adulthood.

    Directory of Open Access Journals (Sweden)

    Piers Dawes

    Full Text Available It is unclear what the contribution of prenatal versus childhood development is for adult cognitive and sensory function and age-related decline in function. We examined hearing, vision and cognitive function in adulthood according to self-reported birth weight (an index of prenatal development and adult height (an index of early childhood development. Subsets (N = 37,505 to 433,390 of the UK Biobank resource were analysed according to visual and hearing acuity, reaction time and fluid IQ. Sensory and cognitive performance was reassessed after ~4 years (N = 2,438 to 17,659. In statistical modelling including age, sex, socioeconomic status, educational level, smoking, maternal smoking and comorbid disease, adult height was positively associated with sensory and cognitive function (partial correlations; pr 0.05 to 0.12, p < 0.001. Within the normal range of birth weight (10th to 90th percentile, there was a positive association between birth weight and sensory and cognitive function (pr 0.06 to 0.14, p < 0.001. Neither adult height nor birth weight was associated with change in sensory or cognitive function. These results suggest that adverse prenatal and childhood experiences are a risk for poorer sensory and cognitive function and earlier development of sensory and cognitive impairment in adulthood. This finding could have significant implications for preventing sensory and cognitive impairment in older age.

  14. Optoelectronic vision

    Science.gov (United States)

    Ren, Chunye; Parel, Jean-Marie A.

    1993-06-01

    Scientists have searched every discipline to find effective methods of treating blindness, such as using aids based on conversion of the optical image, to auditory or tactile stimuli. However, the limited performance of such equipment and difficulties in training patients have seriously hampered practical applications. A great edification has been given by the discovery of Foerster (1929) and Krause & Schum (1931), who found that the electrical stimulation of the visual cortex evokes the perception of a small spot of light called `phosphene' in both blind and sighted subjects. According to this principle, it is possible to invite artificial vision by using stimulation with electrodes placed on the vision neural system, thereby developing a prosthesis for the blind that might be of value in reading and mobility. In fact, a number of investigators have already exploited this phenomena to produce a functional visual prosthesis, bringing about great advances in this area.

  15. Developing a tool for the preparation of GMP audit of pharmaceutical contract manufacturer.

    Science.gov (United States)

    Linna, Anu; Korhonen, Mirka; Mannermaa, Jukka-Pekka; Airaksinen, Marja; Juppo, Anne Mari

    2008-06-01

    Outsourcing is rapidly growing in the pharmaceutical industry. When the manufacturing activities are outsourced, control of the product's quality has to be maintained. One way to confirm contract manufacturer's GMP (Good Manufacturing Practice) compliance is auditing. Audits can be supported for instance by using GMP questionnaires. The objective of this study was to develop a tool for the audit preparation of pharmaceutical contract manufacturers and to validate its contents by using Delphi method. At this phase of the study the tool was developed for non-sterile finished product contract manufacturers. A modified Delphi method was used with expert panel consisting of 14 experts from pharmaceutical industry, authorities and university. The content validity of the developed tool was assessed by a Delphi questionnaire round. The response rate in Delphi questionnaire round was 86%. The tool consisted of 103 quality items, from which 90 (87%) achieved the pre-defined agreement rate level (75%). Thirteen quality items which did not achieve the pre-defined agreement rate were excluded from the tool. The expert panel suggested only minor changes to the tool. The results show that the content validity of the developed audit preparation tool was good.

  16. In Situ 3D Monitoring of Geometric Signatures in the Powder-Bed-Fusion Additive Manufacturing Process via Vision Sensing Methods.

    Science.gov (United States)

    Li, Zhongwei; Liu, Xingjian; Wen, Shifeng; He, Piyao; Zhong, Kai; Wei, Qingsong; Shi, Yusheng; Liu, Sheng

    2018-04-12

    Lack of monitoring of the in situ process signatures is one of the challenges that has been restricting the improvement of Powder-Bed-Fusion Additive Manufacturing (PBF AM). Among various process signatures.

  17. The evaluation of the professional development of English faculties from their own vision of excellence

    Directory of Open Access Journals (Sweden)

    Daniel González González

    2013-06-01

    Full Text Available The general objective of this paper is to offer a system of teaching excellence indicators for the faculties of English as a foreign language in Cuba to guide their evaluation, training and professional development, considering the different stages of their academic career. Quality studies have been highly demanded in the educational field in the last decade. Accreditation processes and systems have been created and implemented to evaluate the excellence of teaching at universities worldwide. Cuban universities are not apart from that reality, facultiesʼ professional development is an important element to be considered however no indicators have been defined to evaluate and guide their performance. The model adopted in this research is the descriptive one. It was carried out in three stages so as to describe the vision of excellence professors of English in Cuba have of their professional development and the indicators they consider valid to evaluate their own work. For the analysis of the qualitative information we have carried out a deep content analysis and to analyze the quantitative information we used SSPS.

  18. Jute: A Different Story about the Development of Manufacturing Industry and Trade between Britain and India.

    Science.gov (United States)

    Geyer, Patricia

    1997-01-01

    Examines the process used to develop a lesson plan from an academic research article. Includes a lesson plan developed from an article in the Spring 1997 issue of "The Journal of World History" tracing the history of jute (a substitute for flax) manufacturing in colonial India. (MJP)

  19. Production software that works a guide to the concurrent development of realtime manufacturing systems

    CERN Document Server

    Courtright, Ann; Behuniak, John

    1991-01-01

    This useful reference addresses the key tasks that are integral to realtime software development in manufacturing plants: managing the design of the system, setting up and coordinating a development organization, and implementing tools for successfulcompletion and management. Both new and experienced project managers will discover how to use concurrent methodologies to create realtime systems in half the time it usually takes.

  20. An Integrated Environment for Batch Process Development - From Recipe to Manufacture

    DEFF Research Database (Denmark)

    Batch process development involves the process of converting a chemical synthesis into an optimum, safe, robust, and economical process for manufacturing the chemical of desired quality at the ultimate desired scale. In this paper we describe a strategy for developing a set of integrated decision...

  1. Steering the Information Society Development as a Vision-based, Multi-stakeholder Process: a Point of View

    Directory of Open Access Journals (Sweden)

    Horatiu Dragomirescu

    2013-11-01

    Full Text Available The steering of the information society development at country level is a desideratum for the smooth unfolding of the respective societal change -- nowadays a key issue worldwide for scientific research and public governance. Some possible guidelines are presented on how to come up with a vision shared by stakeholders and how to ensure concertation among them along the way.

  2. The development of the market for photovoltaic energy in the Netherlands. Vision of the Organization for Renewable Energy (ODE)

    International Nuclear Information System (INIS)

    Cace, J.

    2004-01-01

    A brief overview is given of the vision of the Dutch Organization for Renewable Energy (ODE, abbreviated in Dutch) on the development of the market for photovoltaic energy in the Netherlands, focusing on the investment cost, bottlenecks and solutions, and parties involved [nl

  3. Vision Algorithms Catch Defects in Screen Displays

    Science.gov (United States)

    2014-01-01

    Andrew Watson, a senior scientist at Ames Research Center, developed a tool called the Spatial Standard Observer (SSO), which models human vision for use in robotic applications. Redmond, Washington-based Radiant Zemax LLC licensed the technology from NASA and combined it with its imaging colorimeter system, creating a powerful tool that high-volume manufacturers of flat-panel displays use to catch defects in screens.

  4. Development of a novel cold forging process to manufacture eccentric shafts

    Science.gov (United States)

    Pasler, Lukas; Liewald, Mathias

    2018-05-01

    Since the commercial usage of compact combustion engines, eccentric shafts have been used to transform translational into rotational motion. Over the years, several processes to manufacture these eccentric shafts or crankshafts have been developed. Especially for single-cylinder engines manufactured in small quantities, built crankshafts disclose advantages regarding tooling costs and performance. Those manufacturing processes do have one thing in common: They are all executed at elevated temperatures to enable the material to be formed to high forming degree. In this paper, a newly developed cold forging process is presented, which combines lateral extrusion and shifting for manufacturing a crank in one forming operation at room temperature. In comparison to the established upsetting and shifting methods to manufacture such components, the tool cavity or crank web thickness remains constant. Therefore, the developed new process presented in this paper consists of a combination of shifting and extrusion of the billet, which allows pushing material into the forming zone during shifting. In order to reduce the tensile stresses induced by the shifting process, compressive stresses are superimposed. It is expected that the process limits will be expanded regarding the horizontal displacement and form filling. In the following report, the simulation and design of the tooling concept are presented. Experiments were conducted and compared with corresponding simulation results afterwards.

  5. PERSPECTIVES FOR FOG COMPUTING IN MANUFACTURING

    Directory of Open Access Journals (Sweden)

    Jakub PIZOŃ

    2016-09-01

    Full Text Available This article discusses ongoing efforts to enable the fog computing vision in manufacturing. As a new paradigm of computing implementation of fog computing faces many challenges that open perspective of new applications within a field of manufacturing. It is expected that fog computing will be one of factors that will accelerate development of in forth industrial revolution. In this article we discuss the perspectives of manufacturing companies surrounded by new solutions of CPS, CPPS and CM in relation to fog computing.

  6. From e-manufacturing to Internet Product Process Development (IPPD) through remote – labs

    International Nuclear Information System (INIS)

    Nieto, Ernesto Córdoba; Parra, Paulo Andres Cifuentes; Díaz, Juan Camilo Parra

    2014-01-01

    This paper presents the research developed at Universidad Nacional de Colombia about the e-Manufacturing platform that is being developed and implemented at LabFabEx (acronym in Spanish as L aboratorio Fabrica Experimental ) . This platform besides has an approach to virtual-remote labs that have been tested by several students and engineers of different industrial fields. At this paper it is shown the physical and communication experimental platform, the general scope and characteristics of this e-Manufacturing platform and the virtual lab approach. This research project is funded by COLCIENCIAS (Administrative Department of science, technology and innovation in Colombia) and the enterprise IMOCOM S.A

  7. A mixed method approach to data collection for the development of a six sigma framework for Libyan Manufacturing Companies (LMCs)

    OpenAIRE

    Elgadi, Osama; Birkett, Martin; Cheung, Wai Ming

    2015-01-01

    This paper investigates the current quality management processes in use in Libyan Manufacturing Companies (LMCs), and proposes a methodology of mixed method approach to data collection to develop a novel six sigma framework. To date, there is no evidence of the use of six sigma in the Libyan manufacturing industry, and it is found that only 58 companies in Libya currently have ISO 9001 accreditation of which only 9 are manufacturing companies. This underutilisation of manufacturing systems su...

  8. Virtual Vision

    Science.gov (United States)

    Terzopoulos, Demetri; Qureshi, Faisal Z.

    Computer vision and sensor networks researchers are increasingly motivated to investigate complex multi-camera sensing and control issues that arise in the automatic visual surveillance of extensive, highly populated public spaces such as airports and train stations. However, they often encounter serious impediments to deploying and experimenting with large-scale physical camera networks in such real-world environments. We propose an alternative approach called "Virtual Vision", which facilitates this type of research through the virtual reality simulation of populated urban spaces, camera sensor networks, and computer vision on commodity computers. We demonstrate the usefulness of our approach by developing two highly automated surveillance systems comprising passive and active pan/tilt/zoom cameras that are deployed in a virtual train station environment populated by autonomous, lifelike virtual pedestrians. The easily reconfigurable virtual cameras distributed in this environment generate synthetic video feeds that emulate those acquired by real surveillance cameras monitoring public spaces. The novel multi-camera control strategies that we describe enable the cameras to collaborate in persistently observing pedestrians of interest and in acquiring close-up videos of pedestrians in designated areas.

  9. Indigenous Health Workforce Development: challenges and successes of the Vision 20:20 programme.

    Science.gov (United States)

    Curtis, Elana; Reid, Papaarangi

    2013-01-01

    There are significant health workforce inequities that exist internationally. The shortage of indigenous health professionals within Australia and New Zealand requires action across multiple sectors, including health and education. This article outlines the successes and challenges of the University of Auckland's Vision 20:20 programme, which aims to improve indigenous Māori and Pacific health workforce development via recruitment, bridging/foundation and tertiary retention support interventions within the Faculty of Medical and Health Sciences (FMHS). Seven years of student data (2005-2011) are presented for undergraduate Student Pass Rate (SPR) by ethnicity and Certificate in Health Sciences (CertHSc) SPR, enrolments and completions by ethnicity. Four key areas of development are described: (i) student selection and pathway planning; (ii) foundation programme refinement; (iii) academic/pastoral support; and (iv) re-development of the indigenous recruitment model. Key programme developments have had a positive impact on basic student data outcomes. The FMHS undergraduate SPR increased from 89% in 2005 to 94% in 2011 for Māori and from 81% in 2005 to 87% in 2011 for Pacific. The CertHSc SPR increased from 52% in 2005 to 92% in 2011 with a greater proportion of Māori and Pacific enrolments achieving completion over time (18-76% for Māori and 29-74% for Pacific). Tertiary institutions have the potential to make an important contribution to indigenous health workforce development. Key challenges remain including secondary school feeder issues, equity funding, programme evaluation, post-tertiary specialist workforce development and retention in Aotearoa, New Zealand. © 2012 The Authors. ANZ Journal of Surgery © 2012 Royal Australasian College of Surgeons.

  10. Development of Manufacturing Technology to Accelerate Cost Reduction of Low Concentration and

    Energy Technology Data Exchange (ETDEWEB)

    Detrick, Adam [The Solaria Corporation, Fremont, CA (United States)

    2017-09-27

    The purpose of this project was to accelerate deployment of cost-effective US-based manufacturing of Solaria’s unique c-Si module technology. This effort successfully resulted in the development of US-based manufacturing technology to support two highly-differentiated, market leading product platforms. The project was initially predicated on developing Solaria’s low-concentration PV (LCPV) module technology which at the time of the award was uniquely positioned to exceed the SunShot price goal of $0.50/Wp for standard c-Si modules. The Solaria LCPV module is a 2.5x concentrator that leverages proven, high-reliability PV module materials and low silicon cell usage into a technology package that already had the lowest direct material cost and leading Levelized Cost of Electricity (LCOE). With over 25 MW commercially deployed globally, the Solaria module was well positioned to continue to lead in PV module cost reduction. Throughout the term of the contract, market conditions changed dramatically and so to did Solaria’s product offerings to support this. However, the manufacturing technology developed for the LCPV module was successfully leveraged and optimized to support two new and different product platforms. BIPV “PowerVision” and High-efficiency “PowerXT” modules. The primary barrier to enabling high-volume PV module manufacturing in the US is the high manual labor component in certain unique aspects of our manufacturing process. The funding was used to develop unique manufacturing automation which makes the manual labor components of these key processes more efficient and increase throughput. At the core of Solaria’s product offerings are its unique and proprietary techniques for dicing and re-arranging solar cells into modules with highly-differentiated characteristics that address key gaps in the c-Si market. It is these techniques that were successfully evolved and deployed into US-based manufacturing site with SunShot funding. Today, Solaria

  11. Development of manufacturing technology and fabrication of prototype for main coolant pump

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Koon Seok; Han, C.K.; Chei, J.M.; Chung, K.S.; Youn, M.H.; Shin, S.A.; Choi, D.J.; Kim, H.C. [HALLA Industrial Co., Ltd., Pusan (Korea)

    1999-03-01

    This study presents the development of the manufacturing technology for the Main Coolant Pump of the SMART. This report contains the followings; (1) Select axial type pump for the MCP (2) MCP is drived by squirrel-cage induction motor that consisted canned motor type. (3) MCP shaft has three horizontal and one vertical support bearings. (4) Design of several part of the MCP (5) Manufacturing of the performance test motor (6) Design and manufacturing of the speed sensor (7) Procedures for three-axial and five-axial M.C.T., Tig welding and Electron Beam Welding were developed. (8) Conceptional design of the MCP test facility for the performance test under operating conditions. (9) Results of standard weld test specimens according to the ASME section IX. (author). 21 refs., 35 figs., 10 tabs.

  12. Development of optimum manufacturing technologies of radial plates for the ITER toroidal field coils

    International Nuclear Information System (INIS)

    Nakajima, H.; Hamada, K.; Okuno, K.; Abe, K.; Shimizu, T.; Kakui, H.; Yamaoka, H.; Maruyama, N.; Takayanagi, T.

    2007-01-01

    Japan Atomic Energy Agency is studying rational manufacturing method and developing the optimum manufacturing technologies of the radial plates used in the toroidal field coils for the International Thermonuclear Experimental Reactor (ITER) in collaboration with the Japanese industries. Three sector form pieces were cut by plasma cutting machine from a hot rolled plate without any difficulties and one of them was machined to a 1.32-m long curved segment of the radial plate having the same size as the actual one. However, unacceptable large deformation about 5 mm flatness, which was not observed in 1-m long straight radial plate, was found after intermediate machining. Since it would be caused by groove direction against the hot rolled direction and/or curved shape of grooves, two trial manufactures of 0.4-m long straight radial plates have been performed to clarify the cause of the large deformation. Detailed investigation showed that the large deformation could be avoided if the groove direction would have been parallel to a rolling direction of the plate. Welding trials by using fiber laser technique was also performed and penetration of 15 mm could be obtained in a welding speed of 0.1 m/min at 5 kW laser power. An optimum manufacturing method has been proposed based on the development of manufacturing technologies

  13. Design, Development and Hotfire Testing of Monolithic Copper and Bimetallic Additively Manufactured Combustion Chambers

    Science.gov (United States)

    Gradl, Paul; Barnett, Greg; Brandsmeier, Will; Greene, Sandy Elam; Protz, Chris

    2016-01-01

    NASA and industry partners are working towards fabrication process development to reduce costs and schedules associated with manufacturing liquid rocket engine components with the goal of reducing overall mission costs. One such technique being evaluated is powder-bed fusion or selective laser melting (SLM) otherwise commonly referred to as additive manufacturing. The NASA Low Cost Upper Stage Propulsion (LCUSP) program was designed to develop processes and material characterization for the GRCop-84 copper-alloy commensurate with powder bed additive manufacturing, evaluate bimetallic deposition and complete testing of a full scale combustion chamber. As part of this development, the process has been transferred to industry partners to enable a long-term supply chain of monolithic copper combustion chambers. As a direct spin off of this program, NASA is working with industry partners to further develop the printing process for the GRCop-84 material in addition to the C-18150 (CuCrZr) material. To advance the process further and allow for optimization with multiple materials, NASA is also investigating the feasibility of bimetallic additively manufactured chambers. A 1.2k sized thrust-chamber was designed and developed to compare the printing process of the GRCop-84 and C-18150 SLM materials. A series of similar MCC liners also completed development with an Inconel 625 jacket bonded to the GRcop-84 liner evaluating direct metal deposition (DMD) laser and arc-based techniques. This paper describes the design, development, manufacturing and testing of these combustion chambers and associated lessons learned throughout the design and development process.

  14. Science based integrated approach to advanced nuclear fuel development - vision, approach, and overview

    Energy Technology Data Exchange (ETDEWEB)

    Unal, Cetin [Los Alamos National Laboratory; Pasamehmetoglu, Kemal [IDAHO NATIONAL LAB; Carmack, Jon [IDAHO NATIONAL LAB

    2010-01-01

    Advancing the performance of Light Water Reactors, Advanced Nuclear Fuel Cycles, and Advanced Rcactors, such as the Next Generation Nuclear Power Plants, requires enhancing our fundamental understanding of fuel and materials behavior under irradiation. The capability to accurately model the nuclear fuel systems is critical. In order to understand specific aspects of the nuclear fuel, fully coupled fuel simulation codes are required to achieve licensing of specific nuclear fuel designs for operation. The backbone of these codes, models, and simulations is a fundamental understanding and predictive capability for simulating the phase and microstructural behavior of the nuclear fuel system materials and matrices. The purpose of this paper is to identify the modeling and simulation approach in order to deliver predictive tools for advanced fuels development. The coordination between experimental nuclear fuel design, development technical experts, and computational fuel modeling and simulation technical experts is a critical aspect of the approach and naturally leads to an integrated, goal-oriented science-based R & D approach and strengthens both the experimental and computational efforts. The Advanced Fuels Campaign (AFC) and Nuclear Energy Advanced Modeling and Simulation (NEAMS) Fuels Integrated Performance and Safety Code (IPSC) are working together to determine experimental data and modeling needs. The primary objective of the NEAMS fuels IPSC project is to deliver a coupled, three-dimensional, predictive computational platform for modeling the fabrication and both normal and abnormal operation of nuclear fuel pins and assemblies, applicable to both existing and future reactor fuel designs. The science based program is pursuing the development of an integrated multi-scale and multi-physics modeling and simulation platform for nuclear fuels. This overview paper discusses the vision, goals and approaches how to develop and implement the new approach.

  15. DEVELOPMENT OF TECHNOLOGIES AND ANALYTICAL CAPABILITIES FOR VISION 21 ENERGY PLANTS

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell Osawe; Madhave Symlal; Krishna Thotapalli; and Stephen Zitney

    2003-04-30

    This is the tenth Quarterly Technical Report for DOE Cooperative Agreement No: DE-FC26-00NT40954. The goal of the project is to develop and demonstrate a software framework to enable virtual simulation of Vision 21 plants. During the last quarter much progress was made in software development. The CO wrapper template was developed for the integration of Alstom Power proprietary code INDVU. The session management tasks were completed. The multithreading capability was made functional so that user of the integrated simulation may directly interact with the CFD software. The V21-Controller and the Fluent CO wrapper were upgraded to CO v.1.0. The testing and debugging of the upgraded software is ongoing. Testing of the integrated software was continued. A list of suggested GUI enhancements was made. Remote simulation capability was successfully tested using two networked Windows machines. Work on preparing the release version progressed: CFD database was enhanced, a convergence detection capability was implemented, a Configuration Wizard for low-order models was developed, and the Configuration Wizard for Fluent was enhanced. During the last quarter good progress was made in software demonstration. Various simplified versions of Demo Case 1 were used to debug Configuration Wizard and V21-Controller. The heat exchanger model in FLUENT was calibrated and the energy balance was verified. The INDVU code was integrated into the V21-Controller, and the integrated model is being debugged. A sensitivity loop was inserted into Demo Case 2 to check whether the simulation converges over the desired load range. Work on converting HRSGSIM code to run in batch mode was started. Work on calibrating Demo Case 2 was started.

  16. Science based integrated approach to advanced nuclear fuel development - vision, approach, and overview

    International Nuclear Information System (INIS)

    Unal, Cetin; Pasamehmetoglu, Kemal; Carmack, Jon

    2010-01-01

    Advancing the performance of Light Water Reactors, Advanced Nuclear Fuel Cycles, and Advanced Rcactors, such as the Next Generation Nuclear Power Plants, requires enhancing our fundamental understanding of fuel and materials behavior under irradiation. The capability to accurately model the nuclear fuel systems is critical. In order to understand specific aspects of the nuclear fuel, fully coupled fuel simulation codes are required to achieve licensing of specific nuclear fuel designs for operation. The backbone of these codes, models, and simulations is a fundamental understanding and predictive capability for simulating the phase and microstructural behavior of the nuclear fuel system materials and matrices. The purpose of this paper is to identify the modeling and simulation approach in order to deliver predictive tools for advanced fuels development. The coordination between experimental nuclear fuel design, development technical experts, and computational fuel modeling and simulation technical experts is a critical aspect of the approach and naturally leads to an integrated, goal-oriented science-based R and D approach and strengthens both the experimental and computational efforts. The Advanced Fuels Campaign (AFC) and Nuclear Energy Advanced Modeling and Simulation (NEAMS) Fuels Integrated Performance and Safety Code (IPSC) are working together to determine experimental data and modeling needs. The primary objective of the NEAMS fuels IPSC project is to deliver a coupled, three-dimensional, predictive computational platform for modeling the fabrication and both normal and abnormal operation of nuclear fuel pins and assemblies, applicable to both existing and future reactor fuel designs. The science based program is pursuing the development of an integrated multi-scale and multi-physics modeling and simulation platform for nuclear fuels. This overview paper discusses the vision, goals and approaches how to develop and implement the new approach.

  17. A reliable and valid questionnaire was developed to measure computer vision syndrome at the workplace.

    Science.gov (United States)

    Seguí, María del Mar; Cabrero-García, Julio; Crespo, Ana; Verdú, José; Ronda, Elena

    2015-06-01

    To design and validate a questionnaire to measure visual symptoms related to exposure to computers in the workplace. Our computer vision syndrome questionnaire (CVS-Q) was based on a literature review and validated through discussion with experts and performance of a pretest, pilot test, and retest. Content validity was evaluated by occupational health, optometry, and ophthalmology experts. Rasch analysis was used in the psychometric evaluation of the questionnaire. Criterion validity was determined by calculating the sensitivity and specificity, receiver operator characteristic curve, and cutoff point. Test-retest repeatability was tested using the intraclass correlation coefficient (ICC) and concordance by Cohen's kappa (κ). The CVS-Q was developed with wide consensus among experts and was well accepted by the target group. It assesses the frequency and intensity of 16 symptoms using a single rating scale (symptom severity) that fits the Rasch rating scale model well. The questionnaire has sensitivity and specificity over 70% and achieved good test-retest repeatability both for the scores obtained [ICC = 0.802; 95% confidence interval (CI): 0.673, 0.884] and CVS classification (κ = 0.612; 95% CI: 0.384, 0.839). The CVS-Q has acceptable psychometric properties, making it a valid and reliable tool to control the visual health of computer workers, and can potentially be used in clinical trials and outcome research. Copyright © 2015 Elsevier Inc. All rights reserved.

  18. Research and Development of Target Recognition and Location Crawling Platform based on Binocular Vision

    Science.gov (United States)

    Xu, Weidong; Lei, Zhu; Yuan, Zhang; Gao, Zhenqing

    2018-03-01

    The application of visual recognition technology in industrial robot crawling and placing operation is one of the key tasks in the field of robot research. In order to improve the efficiency and intelligence of the material sorting in the production line, especially to realize the sorting of the scattered items, the robot target recognition and positioning crawling platform based on binocular vision is researched and developed. The images were collected by binocular camera, and the images were pretreated. Harris operator was used to identify the corners of the images. The Canny operator was used to identify the images. Hough-chain code recognition was used to identify the images. The target image in the image, obtain the coordinates of each vertex of the image, calculate the spatial position and posture of the target item, and determine the information needed to capture the movement and transmit it to the robot control crawling operation. Finally, In this paper, we use this method to experiment the wrapping problem in the express sorting process The experimental results show that the platform can effectively solve the problem of sorting of loose parts, so as to achieve the purpose of efficient and intelligent sorting.

  19. Precision manufacturing

    CERN Document Server

    Dornfeld, David

    2008-01-01

    Today there is a high demand for high-precision products. The manufacturing processes are now highly sophisticated and derive from a specialized genre called precision engineering. Precision Manufacturing provides an introduction to precision engineering and manufacturing with an emphasis on the design and performance of precision machines and machine tools, metrology, tooling elements, machine structures, sources of error, precision machining processes and precision process planning. As well as discussing the critical role precision machine design for manufacturing has had in technological developments over the last few hundred years. In addition, the influence of sustainable manufacturing requirements in precision processes is introduced. Drawing upon years of practical experience and using numerous examples and illustrative applications, David Dornfeld and Dae-Eun Lee cover precision manufacturing as it applies to: The importance of measurement and metrology in the context of Precision Manufacturing. Th...

  20. Development of casting technology for manufacturing metal rods with simulated metallic spent fuels

    International Nuclear Information System (INIS)

    Lee, D. B.; Lee, Y. S.; Woo, Y. M.; Jang, S. J.; Kim, J. D; Kim, C. K.; Shin, Y. J.; Lee, J. H.

    1999-01-01

    The advanced casting equipment based on the directional solidification method was developed for manufacturing the uranium metal rod having 13.5 mm diameter and 1,200 mm length. In order to prevent surface-shrunk holes revealed easily in course of casting the small diameter and long rods, the vacuum casting furnace has the four pre-heaters equipped with temperature controller. On the other hand, the computer simulation to estimate the defective location and to analyze the solidus behavior of molten uranium in the mold were also performed by using MAGMA Code. As a result of the experimental and theoretical study, the sound rod has successfully been manufactured

  1. Development strategy and process models for phased automation of design and digital manufacturing electronics

    Science.gov (United States)

    Korshunov, G. I.; Petrushevskaya, A. A.; Lipatnikov, V. A.; Smirnova, M. S.

    2018-03-01

    The strategy of quality of electronics insurance is represented as most important. To provide quality, the processes sequence is considered and modeled by Markov chain. The improvement is distinguished by simple database means of design for manufacturing for future step-by-step development. Phased automation of design and digital manufacturing electronics is supposed. The MatLab modelling results showed effectiveness increase. New tools and software should be more effective. The primary digital model is proposed to represent product in the processes sequence from several processes till the whole life circle.

  2. Community biomass handbook volume 4: enterprise development for integrated wood manufacturing

    Science.gov (United States)

    Eini Lowell; D.R. Becker; D. Smith; M. Kauffman; D. Bihn

    2017-01-01

    The Community Biomass Handbook Volume 4: Enterprise Development for Integrated Wood Manufacturing is a guide for creating sustainable business enterprises using small diameter logs and biomass. This fourth volume is a companion to three Community Biomass Handbook volumes: Volume 1: Thermal Wood Energy; Volume 2: Alaska, Where Woody Biomass Can Work; and Volume 3: How...

  3. Development of STEP-NC Adaptor for Advanced Web Manufacturing System

    Science.gov (United States)

    Ajay Konapala, Mr.; Koona, Ramji, Dr.

    2017-08-01

    Information systems play a key role in the modern era of Information Technology. Rapid developments in IT & global competition calls for many changes in basic CAD/CAM/CAPP/CNC manufacturing chain of operations. ‘STEP-NC’ an enhancement to STEP for operating CNC machines, creating new opportunities for collaborative, concurrent, adaptive works across the manufacturing chain of operations. Schemas and data models defined by ISO14649 in liaison with ISO10303 standards made STEP-NC file rich with feature based, rather than mere point to point information of G/M Code format. But one needs to have a suitable information system to understand and modify these files. Various STEP-NC information systems are reviewed to understand the suitability of STEP-NC for web manufacturing. Present work also deals with the development of an adaptor which imports STEP-NC file, organizes its information, allowing modifications to entity values and finally generates a new STEP-NC file to export. The system is designed and developed to work on web to avail additional benefits through the web and also to be part of a proposed ‘Web based STEP-NC manufacturing platform’ which is under development and explained as future scope.

  4. Process Development for the Design and Manufacturing of Personalizable Mouth Sticks.

    Science.gov (United States)

    Berger, Veronika M; Pölzer, Stephan; Nussbaum, Gerhard; Ernst, Waltraud; Major, Zoltan

    2017-01-01

    To increase the independence of people with reduced hand/arm functionality, a process to generate personalizable mouth sticks was developed based on the participatory design principle. In a web tool, anybody can choose the geometry and the materials of their mouth piece, stick and tip. Manufacturing techniques (e.g. 3D printing) and materials used in the process are discussed and evaluated.

  5. Creativity Enhancement in Lithuanian Furniture Manufacturing Business According to International Business Development

    Directory of Open Access Journals (Sweden)

    Rita Zybartaitė

    2014-04-01

    Full Text Available This article analyzes Lithuanian furniture manufacturing business perceptions towards creativity, and creativityenhancement behavior according to its international development. Firstly article focuses on international business development,substantiate need of creativity for international business development, outline creativity influencing factors which operateat individual, team and organizational levels and recommendations how to enhance creativity in methodical way. Secondly,article describes a problem of empirical research, methodology of used methods and instruments, and presents results of surveyresearch.

  6. THE IMPACT OF GLOBAL COMPETITION ON THE STATE OF MANUFACTURING IN UKRAINE AND DEVELOPED COUNTRIES

    Directory of Open Access Journals (Sweden)

    Kateryna Shatnenko

    2017-11-01

    Full Text Available At the end of the 20th century, the economic structure was changed fundamentally in some countries. It was mostly related to the growth of global competition. One of the consequences of this process was the decline in manufacturing production in developed countries and in the post-Soviet countries. The purpose of this article is to define the meaning and consequences of the decline in manufacturing production in developed countries and in post-Soviet countries on the example of Ukraine. Methodology. This study is based on some general theoretical approaches such as analysis and synthesis, induction and deduction, etc. Also, statistical analysis was used for discovering some economic trends. Structural analysis was helpful for examining shifts in economic structure. Correlation between different facts, which is crucial for the understanding of the transformation of manufacturing, was identified by applying the systems approach. The aim of the article is to reveal the impact of global competition on the state of manufacturing and to define the manufacturing development trend. Results of this research showed that the decline in the rate of profit causes the transformation of economic structure. Global competition made the production of some goods in developed countries less profitable due to the relatively high costs. The ability to transfer labour-intensive production to developing countries transformed economic structure in developed countries. It was the reason for a sharp decline in manufacturing production, which caused some economic and social problems. Post-Soviet countries had serious economic and social problems too. Liberalization of trade made these countries face with global competition. This competition revealed extremely weak competitive positions of a great range of products. There was a massive decline in manufacturing production in Ukraine. This study proves that the transformation of manufacturing is far from the end. First of all

  7. Mechatronic Development and Vision Feedback Control of a Nanorobotics Manipulation System inside SEM for Nanodevice Assembly

    Directory of Open Access Journals (Sweden)

    Zhan Yang

    2016-09-01

    Full Text Available Carbon nanotubes (CNT have been developed in recent decades for nanodevices such as nanoradios, nanogenerators, carbon nanotube field effect transistors (CNTFETs and so on, indicating that the application of CNTs for nanoscale electronics may play a key role in the development of nanotechnology. Nanorobotics manipulation systems are a promising method for nanodevice construction and assembly. For the purpose of constructing three-dimensional CNTFETs, a nanorobotics manipulation system with 16 DOFs was developed for nanomanipulation of nanometer-scale objects inside the specimen chamber of a scanning electron microscope (SEM. Nanorobotics manipulators are assembled into four units with four DOFs (X-Y-Z-θ individually. The rotational one is actuated by a picomotor. That means a manipulator has four DOFs including three linear motions in the X, Y, Z directions and a 360-degree rotational one (X-Y-Z-θ stage, θ is along the direction rotating with X or Y axis. Manipulators are actuated by picomotors with better than 30 nm linear resolution and <1 micro-rad rotary resolution. Four vertically installed AFM cantilevers (the axis of the cantilever tip is vertical to the axis of electronic beam of SEM served as the end-effectors to facilitate the real-time observation of the operations. A series of kinematic derivations of these four manipulators based on the Denavit-Hartenberg (D-H notation were established. The common working space of the end-effectors is 2.78 mm by 4.39 mm by 6 mm. The manipulation strategy and vision feedback control for multi-manipulators operating inside the SEM chamber were been discussed. Finally, application of the designed nanorobotics manipulation system by successfully testing of the pickup-and-place manipulation of an individual CNT onto four probes was described. The experimental results have shown that carbon nanotubes can be successfully picked up with this nanorobotics manipulation system.

  8. Mechatronic Development and Vision Feedback Control of a Nanorobotics Manipulation System inside SEM for Nanodevice Assembly

    Science.gov (United States)

    Yang, Zhan; Wang, Yaqiong; Yang, Bin; Li, Guanghui; Chen, Tao; Nakajima, Masahiro; Sun, Lining; Fukuda, Toshio

    2016-01-01

    Carbon nanotubes (CNT) have been developed in recent decades for nanodevices such as nanoradios, nanogenerators, carbon nanotube field effect transistors (CNTFETs) and so on, indicating that the application of CNTs for nanoscale electronics may play a key role in the development of nanotechnology. Nanorobotics manipulation systems are a promising method for nanodevice construction and assembly. For the purpose of constructing three-dimensional CNTFETs, a nanorobotics manipulation system with 16 DOFs was developed for nanomanipulation of nanometer-scale objects inside the specimen chamber of a scanning electron microscope (SEM). Nanorobotics manipulators are assembled into four units with four DOFs (X-Y-Z-θ) individually. The rotational one is actuated by a picomotor. That means a manipulator has four DOFs including three linear motions in the X, Y, Z directions and a 360-degree rotational one (X-Y-Z-θ stage, θ is along the direction rotating with X or Y axis). Manipulators are actuated by picomotors with better than 30 nm linear resolution and SEM) served as the end-effectors to facilitate the real-time observation of the operations. A series of kinematic derivations of these four manipulators based on the Denavit-Hartenberg (D-H) notation were established. The common working space of the end-effectors is 2.78 mm by 4.39 mm by 6 mm. The manipulation strategy and vision feedback control for multi-manipulators operating inside the SEM chamber were been discussed. Finally, application of the designed nanorobotics manipulation system by successfully testing of the pickup-and-place manipulation of an individual CNT onto four probes was described. The experimental results have shown that carbon nanotubes can be successfully picked up with this nanorobotics manipulation system. PMID:27649180

  9. Mechatronic Development and Vision Feedback Control of a Nanorobotics Manipulation System inside SEM for Nanodevice Assembly.

    Science.gov (United States)

    Yang, Zhan; Wang, Yaqiong; Yang, Bin; Li, Guanghui; Chen, Tao; Nakajima, Masahiro; Sun, Lining; Fukuda, Toshio

    2016-09-14

    Carbon nanotubes (CNT) have been developed in recent decades for nanodevices such as nanoradios, nanogenerators, carbon nanotube field effect transistors (CNTFETs) and so on, indicating that the application of CNTs for nanoscale electronics may play a key role in the development of nanotechnology. Nanorobotics manipulation systems are a promising method for nanodevice construction and assembly. For the purpose of constructing three-dimensional CNTFETs, a nanorobotics manipulation system with 16 DOFs was developed for nanomanipulation of nanometer-scale objects inside the specimen chamber of a scanning electron microscope (SEM). Nanorobotics manipulators are assembled into four units with four DOFs (X-Y-Z-θ) individually. The rotational one is actuated by a picomotor. That means a manipulator has four DOFs including three linear motions in the X, Y, Z directions and a 360-degree rotational one (X-Y-Z-θ stage, θ is along the direction rotating with X or Y axis). Manipulators are actuated by picomotors with better than 30 nm linear resolution and <1 micro-rad rotary resolution. Four vertically installed AFM cantilevers (the axis of the cantilever tip is vertical to the axis of electronic beam of SEM) served as the end-effectors to facilitate the real-time observation of the operations. A series of kinematic derivations of these four manipulators based on the Denavit-Hartenberg (D-H) notation were established. The common working space of the end-effectors is 2.78 mm by 4.39 mm by 6 mm. The manipulation strategy and vision feedback control for multi-manipulators operating inside the SEM chamber were been discussed. Finally, application of the designed nanorobotics manipulation system by successfully testing of the pickup-and-place manipulation of an individual CNT onto four probes was described. The experimental results have shown that carbon nanotubes can be successfully picked up with this nanorobotics manipulation system.

  10. The development and manufacture of size for size feeder pipe for feeder replacement

    International Nuclear Information System (INIS)

    Legate, G.; Schreiter, D.; Townley, N.

    2008-01-01

    The recently recognised problem of feeder pipe thinning created a unique sourcing problem. Operators require relatively small quantities of nuclear class 1 seamless feeder pipe for such replacement which prior to the introduction of this product in 2006 was not available. It was desired that the pipe be produced at the exact size of the pipe currently in use at the specific reactor site (feeder pipe size varies from site to site). Secondly the pipe had to be made in conformance to the original code year of issue and to conform to the intent of the original material specifications. Finally a supply strategy had to be implemented allowing for timely manufacture of replacement piping. This presentation will report upon how replacement size for size feeder tube was developed and is currently manufactured at Nu-Tech Precision Metals. The paper will also detail the current supply strategy to ensure timely manufacture of the product.

  11. HOW DO DIFFERENT COORDINATION MECHANISMS BETWEEN NEW PRODUCT DEVELOPMENT AND MANUFACTURING INFLUENCE FIRM PERFORMANCE?

    DEFF Research Database (Denmark)

    Timenes Laugen, Bjørge; Acur, Nuran; Boer, Harry

    In the literature several suggestions have been put forward for tools, methods and mechanisms to coordinate new product development (NPD) and manufacturing. However, evidence of the operational performance effects of many of these approaches is at best limited. Furthermore, there is a lack...... of understanding of how various coordination mechanisms work in different contexts. Using a survey consisting of data from 677 manufacturing firms from 19 countries worldwide, we test how coordination mechanisms relate to operational performance, and how context moderates these relationships or affects performance...... between standardization and organization design, respectively, and performance are positively moderated by company size. Furthermore, innovativeness moderates the relationship between organization design and performance positively. For managers, our findings indicate that NPD-manufacturing coordination...

  12. FPGA Vision Data Architecture

    Science.gov (United States)

    Morfopoulos, Arin C.; Pham, Thang D.

    2013-01-01

    JPL has produced a series of FPGA (field programmable gate array) vision algorithms that were written with custom interfaces to get data in and out of each vision module. Each module has unique requirements on the data interface, and further vision modules are continually being developed, each with their own custom interfaces. Each memory module had also been designed for direct access to memory or to another memory module.

  13. Vision and strategy development of Slovak society. Development Strategy for Slovak society (basis for public adversary)

    International Nuclear Information System (INIS)

    Sikula, V.; Peknik, M.; Tirpak, I.; Bucek, M.

    2010-02-01

    This analytical study analyses the present state as well as strategy of perspectives of development of Slovak society. This strategy of development of Slovak society is scientific testimony of the authors, the manner and extent of its use will determine political representation. Future economic growth and development of Slovak's regions will mainly depend on the availability of raw materials, energy resources, water, food processes and improving the environment. A key issue in the next 5 to 10 years in the energy sector will address energy security, diversification of energy sources, utilization of domestic raw materials and renewable energy and energy savings. The energy security strategy is to achieve a competitive energy industry for reliable and efficient supply of all forms of energy at affordable prices, with a view to protection of the customer and the environment.

  14. Nuclear power and sustainable development: a vision from a developing country

    International Nuclear Information System (INIS)

    Sbaffoni, Monica; Harriague, Santiago

    2008-01-01

    From the understanding of sustainable development as 'growing assets and opening options - not foreclosing them' (IAEA, 2006a), an analysis is made on sustainability conditions for nuclear power in a developing country, based on Argentinean experience. The necessity of developing an autonomous decision-making capability and a technological-industrial infrastructure is stressed. As an example, a brief history of nuclear power in Argentina is summarized, focusing in key elements that contributed to sustainability and also pointing out some draw-backs that may have affected it. Finally, some lessons learned are presented, with the aim of sharing the experience and offering a contribution to the present debate on nuclear energy deployment in the periphery. (authors)

  15. Analysis of the status and influence factors of vision development in preschool children

    Directory of Open Access Journals (Sweden)

    Guang-Qiang Wu

    2013-12-01

    Full Text Available AIM:To investigate the visual acuity, refraction and influence factors of preschool children in some nurseries in Nanjing. METHODS: Children from 4 to 6 years old in Nanjing attended the visual acuity examination, and filled in factors questionnaire. The results were analyzed.RESULTS:Visual acuity at P5 was 0.4 of 4 years, 0.5 of 5 years, and 0.6 of 6 years. Refraction, gestational age, birth weight, closely using eyes, daily watching television time, daily outdoor activity time, picky eaters situation, chewing situation, parents diopter, home lighting status were associated with vision disorders. Factors score at P5 is 5.CONCLUSION: The visual acuity less than P5 at each ages was abnormal vision. Child whose factors score of less than 5 had high risk of abnormal vision, and need to pay close attention to visual conditions.

  16. Computational vision

    CERN Document Server

    Wechsler, Harry

    1990-01-01

    The book is suitable for advanced courses in computer vision and image processing. In addition to providing an overall view of computational vision, it contains extensive material on topics that are not usually covered in computer vision texts (including parallel distributed processing and neural networks) and considers many real applications.

  17. Monocular and binocular development in children with albinism, infantile nystagmus syndrome, and normal vision.

    Science.gov (United States)

    Huurneman, Bianca; Boonstra, F Nienke

    2013-12-01

    To compare interocular acuity differences, crowding ratios, and binocular summation ratios in 4- to 8-year-old children with albinism (n = 16), children with infantile nystagmus syndrome (n = 10), and children with normal vision (n = 72). Interocular acuity differences and binocular summation ratios were compared between groups. Crowding ratios were calculated by dividing the single Landolt C decimal acuity with the crowded Landolt C decimal acuity mono- and binocularly. A linear regression analysis was conducted to investigate the contribution of 5 predictors to the monocular and binocular crowding ratio: nystagmus amplitude, nystagmus frequency, strabismus, astigmatism, and anisometropia. Crowding ratios were higher under mono- and binocular viewing conditions for children with infantile nystagmus syndrome than for children with normal vision. Children with albinism showed higher crowding ratios in their poorer eye and under binocular viewing conditions than children with normal vision. Children with albinism and children with infantile nystagmus syndrome showed larger interocular acuity differences than children with normal vision (0.1 logMAR in our clinical groups and 0.0 logMAR in children with normal vision). Binocular summation ratios did not differ between groups. Strabismus and nystagmus amplitude predicted the crowding ratio in the poorer eye (p = 0.015 and p = 0.005, respectively). The crowding ratio in the better eye showed a marginally significant relation with nystagmus frequency and depth of anisometropia (p = 0.082 and p = 0.070, respectively). The binocular crowding ratio was not predicted by any of the variables. Children with albinism and children with infantile nystagmus syndrome show larger interocular acuity differences than children with normal vision. Strabismus and nystagmus amplitude are significant predictors of the crowding ratio in the poorer eye.

  18. Manufacturing capability as a technological development indicator in the pharmaceutical industry

    Directory of Open Access Journals (Sweden)

    John Jairo Gallo Castro

    2010-01-01

    Full Text Available The pharmaceutical industrial has five subsectors: medicines, cosmetics, phytotherapeutics, cleaning products and medical devices. The medicine subsector consists of organisations producing, importing and selling these products. Most studies about this industry have been guided by economic interests without assessing technological aspects of production. This article was aimed at proposing a methodology for assessing and describing the medicine sector according to its technological development by using the manufacturing capability concept. The main information was taken from the Colombian Medicaments and Food Surveillance Institute’s (Instituto Nacional de Vigilancia de Medicamentos y Alimentos - INVIMA databases related to pharmaceutical plant production in Bogotá, including material transformation facilities. This study led to three characteristics being identified for defining the pharmaceutical industry’s manufacturing capability: that related to the pharmacological group to which active pharmaceutical ingredients belong, that linked to specifications regarding medicines’ sterility and that related to the technology required for manufacturing each pharmaceutical product. An analysis of these features has thus been presented and some technologies have been identified which have not been transferred or assimilated by the organisations being studied. It was found that manufacturing capability should be considered as being an indicator of the degree of technological development in these subsectors in Colombia.

  19. Development of a case-mix funding system for adults with combined vision and hearing loss.

    Science.gov (United States)

    Guthrie, Dawn M; Poss, Jeffrey W

    2013-04-15

    Adults with vision and hearing loss, or dual sensory loss (DSL), present with a wide range of needs and abilities. This creates many challenges when attempting to set the most appropriate and equitable funding levels. Case-mix (CM) funding models represent one method for understanding client characteristics that correlate with resource intensity. A CM model was developed based on a derivation sample (n = 182) and tested with a replication sample (n = 135) of adults aged 18+ with known DSL who were living in the community. All items within the CM model came from a standardized, multidimensional assessment, the interRAI Community Health Assessment and the Deafblind Supplement. The main outcome was a summary of formal and informal service costs which included intervenor and interpreter support, in-home nursing, personal support and rehabilitation services. Informal costs were estimated based on a wage rate of half that for a professional service provider ($10/hour). Decision-tree analysis was used to create groups with homogeneous resource utilization. The resulting CM model had 9 terminal nodes. The CM index (CMI) showed a 35-fold range for total costs. In both the derivation and replication sample, 4 groups (out of a total of 18 or 22.2%) had a coefficient of variation value that exceeded the overall level of variation. Explained variance in the derivation sample was 67.7% for total costs versus 28.2% in the replication sample. A strong correlation was observed between the CMI values in the two samples (r = 0.82; p = 0.006). The derived CM funding model for adults with DSL differentiates resource intensity across 9 main groups and in both datasets there is evidence that these CM groups appropriately identify clients based on need for formal and informal support.

  20. Model Development and Process Analysis for Lean Cellular Design Planning in Aerospace Assembly and Manufacturing

    Science.gov (United States)

    Hilburn, Monty D.

    Successful lean manufacturing and cellular manufacturing execution relies upon a foundation of leadership commitment and strategic planning built upon solid data and robust analysis. The problem for this study was to create and employ a simple lean transformation planning model and review process that could be used to identify functional support staff resources required to plan and execute lean manufacturing cells within aerospace assembly and manufacturing sites. The lean planning model was developed using available literature for lean manufacturing kaizen best practices and validated through a Delphi panel of lean experts. The resulting model and a standardized review process were used to assess the state of lean transformation planning at five sites of an international aerospace manufacturing and assembly company. The results of the three day, on-site review were compared with baseline plans collected from each of the five sites to determine if there analyzed, with focus on three critical areas of lean planning: the number and type of manufacturing cells identified, the number, type, and duration of planned lean and continuous kaizen events, and the quantity and type of functional staffing resources planned to support the kaizen schedule. Summarized data of the baseline and on-site reviews was analyzed with descriptive statistics. ANOVAs and paired-t tests at 95% significance level were conducted on the means of data sets to determine if null hypotheses related to cell, kaizen event, and support resources could be rejected. The results of the research found significant differences between lean transformation plans developed by site leadership and plans developed utilizing the structured, on-site review process and lean transformation planning model. The null hypothesis that there was no difference between the means of pre-review and on-site cell counts was rejected, as was the null hypothesis that there was no significant difference in kaizen event plans. These

  1. Development of a 3D parallel mechanism robot arm with three vertical-axial pneumatic actuators combined with a stereo vision system.

    Science.gov (United States)

    Chiang, Mao-Hsiung; Lin, Hao-Ting

    2011-01-01

    This study aimed to develop a novel 3D parallel mechanism robot driven by three vertical-axial pneumatic actuators with a stereo vision system for path tracking control. The mechanical system and the control system are the primary novel parts for developing a 3D parallel mechanism robot. In the mechanical system, a 3D parallel mechanism robot contains three serial chains, a fixed base, a movable platform and a pneumatic servo system. The parallel mechanism are designed and analyzed first for realizing a 3D motion in the X-Y-Z coordinate system of the robot's end-effector. The inverse kinematics and the forward kinematics of the parallel mechanism robot are investigated by using the Denavit-Hartenberg notation (D-H notation) coordinate system. The pneumatic actuators in the three vertical motion axes are modeled. In the control system, the Fourier series-based adaptive sliding-mode controller with H(∞) tracking performance is used to design the path tracking controllers of the three vertical servo pneumatic actuators for realizing 3D path tracking control of the end-effector. Three optical linear scales are used to measure the position of the three pneumatic actuators. The 3D position of the end-effector is then calculated from the measuring position of the three pneumatic actuators by means of the kinematics. However, the calculated 3D position of the end-effector cannot consider the manufacturing and assembly tolerance of the joints and the parallel mechanism so that errors between the actual position and the calculated 3D position of the end-effector exist. In order to improve this situation, sensor collaboration is developed in this paper. A stereo vision system is used to collaborate with the three position sensors of the pneumatic actuators. The stereo vision system combining two CCD serves to measure the actual 3D position of the end-effector and calibrate the error between the actual and the calculated 3D position of the end-effector. Furthermore, to

  2. Development of Optimum Manufacturing Technologies of Radial Plates for the ITER Toroidal Field Coils

    International Nuclear Information System (INIS)

    Nakajima, H.; Hamada, K.; Okuno, K.; Abe, K.; Kakui, H.; Yamaoka, H.; Maruyama, N.

    2006-01-01

    A stainless steel structure called a radial plate is used in the toroidal field (TF) coils of the International Thermonuclear Experimental Reactor (ITER) in order to support large electromagnetic force generated in the conductors. It is a 13.7 m x 8.7 m D-shaped plate having 11 grooves on each side in which conductors are wound. Although severe dimensional accuracy, for example flatness within 2 mm, and tight schedule that all radial plates for 9 TF coils (63 plates) have to be manufactured in about 4 years are required in manufacture of the radial plates, there are no industries in the world who have manufactured a large complicated structure like the radial plate with high accuracy. Japan Atomic Energy Agency (JAEA) has been studying rational manufacturing method and developing the optimum manufacturing technologies of the radial plates in order to satisfy the above requirements in collaboration with the Ishikawajima-Harima Heavy Industries Co., Ltd. (IHI). Several trial manufactures of radial plates have been performed to clarify the following key points: · Effect of nitrogen content in material on machinability · Effect of cutting direction of a piece on deformation caused by machining · Effect of machining shape (curve or straight) on machining condition · Effect of laser welding technique on penetration and welding deformation Three different 316LN materials having nitrogen content of 0.12 %, 0.17%, and 0.20% were used to investigate nitrogen content effect on machinability. Machinability of lower nitrogen content material was slightly better than that of higher nitrogen content material. Three sectoral pieces were cut by plasma cutting technique from a hot rolled plate without any difficulties and one of them was machined to a curved segment of the radial plate having the same size as actual one. However, unacceptable large deformation over 5 mm flatness was found during machining which would be caused by curved shape of grooves and/or cutting direction

  3. Future directions for the development of virtual reality within an automotive manufacturer.

    Science.gov (United States)

    Lawson, Glyn; Salanitri, Davide; Waterfield, Brian

    2016-03-01

    Virtual Reality (VR) can reduce time and costs, and lead to increases in quality, in the development of a product. Given the pressure on car companies to reduce time-to-market and to continually improve quality, the automotive industry has championed the use of VR across a number of applications, including design, manufacturing, and training. This paper describes interviews with 11 engineers and employees of allied disciplines from an automotive manufacturer about their current physical and virtual properties and processes. The results guided a review of research findings and scientific advances from the academic literature, which formed the basis of recommendations for future developments of VR technologies and applications. These include: develop a greater range of virtual contexts; use multi-sensory simulation; address perceived differences between virtual and real cars; improve motion capture capabilities; implement networked 3D technology; and use VR for market research. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  4. Development and manufacturing of special fission chambers for in-core measurement requirements in nuclear reactors

    International Nuclear Information System (INIS)

    Geslot, B.; Berhouet, F.; Oriol, L.; Breaud, S.; Jammes, C.; Filliatre, P.; Villard, J. F.

    2009-01-01

    The Dosimetry Command control and Instrumentation Laboratory (LDCI) at CEA/Cadarache is specialized in the development, design and manufacturing of miniature fission chambers (from 8 mm down to 1.5 mm in diameter). The LDCI fission chambers workshop specificity is its capacity to manufacture and distribute special fission chambers with fissile deposits other than U 235 (typically Pu 242 , Np 237 , U 238 , Th 232 ). We are also able to define the characteristics of the detector for any in-core measurement requirements: sensor geometry, fissile deposit material and mass, filling gas composition and pressure, operating mode (pulse, current or Campbelling) with associated cable and electronics. The fission chamber design relies on numerical simulation and modeling tools developed by the LDCI. One of our present activities in fission chamber applications is to develop a fast neutron flux instrumentation using Campbelling mode dedicated to measurements in material testing reactors. (authors)

  5. Development and manufacturing of special fission chambers for in-core measurement requirements in nuclear reactors

    Energy Technology Data Exchange (ETDEWEB)

    Geslot, B.; Berhouet, F.; Oriol, L.; Breaud, S.; Jammes, C.; Filliatre, P.; Villard, J. F. [CEA, DEN, Dosimetry Command Control and Instrumentation Laboratory, F-13109 Saint-Paul-lez-Durance (France)

    2009-07-01

    The Dosimetry Command control and Instrumentation Laboratory (LDCI) at CEA/Cadarache is specialized in the development, design and manufacturing of miniature fission chambers (from 8 mm down to 1.5 mm in diameter). The LDCI fission chambers workshop specificity is its capacity to manufacture and distribute special fission chambers with fissile deposits other than U{sup 235} (typically Pu{sup 242}, Np{sup 237}, U{sup 238}, Th{sup 232}). We are also able to define the characteristics of the detector for any in-core measurement requirements: sensor geometry, fissile deposit material and mass, filling gas composition and pressure, operating mode (pulse, current or Campbelling) with associated cable and electronics. The fission chamber design relies on numerical simulation and modeling tools developed by the LDCI. One of our present activities in fission chamber applications is to develop a fast neutron flux instrumentation using Campbelling mode dedicated to measurements in material testing reactors. (authors)

  6. Manufacturing technology education development project. Project accomplishment summary for 91-Y12P-050-A1

    Energy Technology Data Exchange (ETDEWEB)

    Douglass, S. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Smith, R. [Tennessee Dept. of Education, Nashville, TN (United States)

    1996-09-25

    The purpose of the project was to provide a set of supplemental instructional equipment and materials to Tennessee high school students to raise their level of knowledge about manufacturing technologies with the hope that some of the best and brightest would choose manufacturing as a career path. The role of the Y-12 Plant was primarily technical: renovate the portable classroom; select and purchase appropriate equipment; install and test the equipment; assist in the development of the curriculum; train the initial group of teachers; and provide technical assistance where needed after the laboratory was deployed. The role of the Department of Education was to provide the mobile facility; assist in the design of the laboratory; lead the development of the curriculum; deploy the trailer; and develop the structure for administering the selection of schools, training teachers, and movement of the laboratory. The Department of Education as subcontracted with Middle Tennessee State University to handle the details of laboratory deployment.

  7. Strategic research on the sustainable development cost of manufacturing industry under the background of carbon allowance and trade policy

    Science.gov (United States)

    Ma, Zhongmin; Cheng, Mengting; Wang, Mei

    2017-08-01

    The important subjects of energy consumption and carbon emission are manufacturing enterprises, with the deepening of international cooperation, and the implementation of carbon limit and trade policy, costs of manufacturing industry will rise sharply. How can the manufacturing industry survive in this reform, and it has to be a problem that the managers of the manufacturing industry need to solve. This paper analyses sustainable development cost connotation and value basis on the basis of sustainable development concept, discusses the influence of carbon allowance and trade policy for cost strategy of manufacturing industry, thinks that manufacturing industry should highlight social responsibility and realize maximization of social value, implement cost strategy the sustainable development, and pointed out the implementation way.

  8. Monocular and binocular development in children with albinism, infantile nystagmus syndrome and normal vision

    NARCIS (Netherlands)

    Huurneman, B.; Boonstra, F.N.

    2013-01-01

    Background/aims: To compare interocular acuity differences, crowding ratios, and binocular summation ratios in 4- to 8-year-old children with albinism (n = 16), children with infantile nystagmus syndrome (n = 10), and children with normal vision (n = 72). Methods: Interocular acuity differences and

  9. Monocular and binocular development in children with albinism, infantile nystagmus syndrome, and normal vision

    NARCIS (Netherlands)

    Huurneman, B.; Boonstra, F.N.

    2013-01-01

    Abstract Background/aims: To compare interocular acuity differences, crowding ratios, and binocular summation ratios in 4- to 8-year-old children with albinism (n = 16), children with infantile nystagmus syndrome (n = 10), and children with normal vision (n = 72). Methods: Interocular acuity

  10. What is vision Hampton Roads?

    Science.gov (United States)

    2010-01-01

    What is Vision Hampton Roads? : Vision Hampton Roads is... : A regionwide economic development strategy based on the collective strengths of all : localities of Hampton Roads, created with the input of business, academia, nonprofits, : government,...

  11. Workshop Report on Additive Manufacturing for Large-Scale Metal Components - Development and Deployment of Metal Big-Area-Additive-Manufacturing (Large-Scale Metals AM) System

    Energy Technology Data Exchange (ETDEWEB)

    Babu, Sudarsanam Suresh [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Manufacturing Demonstration Facility; Love, Lonnie J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Manufacturing Demonstration Facility; Peter, William H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Manufacturing Demonstration Facility; Dehoff, Ryan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Manufacturing Demonstration Facility

    2016-05-01

    ) systems development, (iv) material feedstock, (v) process planning, (vi) residual stress & distortion, (vii) post-processing, (viii) qualification of parts, (ix) supply chain and (x) business case. Furthermore, an open innovation network methodology was proposed to accelerate the development and deployment of new large-scale metal additive manufacturing technology with the goal of creating a new generation of high deposition rate equipment, affordable feed stocks, and large metallic components to enhance America’s economic competitiveness.

  12. Developing an inventor support service which performs early stage market and manufacturing evaluations. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    American businesses are learning the difficult high cost lesson of ignoring production and market factors (producibility, unit product cost (UPC), marketability, etc) during the engineering design phase of product development. Studies have shown that the Japanese spend three times as long as Americans in the design feasibility and decision process of new product introductions and one third the amount of time in the implementation of those products. There is a 20 to 1 cost benefit on effort applied in the design phase versus the production phase of the product life cycle. The number one goal of this project was to establish an organization that has, as one of its purposes, the providing of services responsive to the needs of independent inventors. The number two goal was to demonstrate the value of providing marketing and manufacturing counsel at an early stage in the product development process. The first study goal was met by providing the materials and information necessary to establish an evaluation team and an organization to handle such evaluations. The second study goal was met by demonstrating the impact of early market analysis and manufacturing considerations on product design and therefore on the description of the invention for four different inventions. These inventions were selected at various stages of development. Regardless of stage of development, the marketing and manufacturing reviews resulted in significant changes in design and/or market positioning.

  13. Developing an inventor support service which performs early stage market and manufacturing evaluations. [Final Report

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    American businesses are learning the difficult high cost lesson of ignoring production and market factors (producibility, unit product cost (UPC), marketability, etc) during the engineering design phase of product development. Studies have shown that the Japanese spend three times as long as Americans in the design feasibility and decision process of new product introductions and one third the amount of time in the implementation of those products. There is a 20 to 1 cost benefit on effort applied in the design phase versus the production phase of the product life cycle. The number one goal of this project was to establish an organization that has, as one of its purposes, the providing of services responsive to the needs of independent inventors. The number two goal was to demonstrate the value of providing marketing and manufacturing counsel at an early stage in the product development process. The first study goal was met by providing the materials and information necessary to establish an evaluation team and an organization to handle such evaluations. The second study goal was met by demonstrating the impact of early market analysis and manufacturing considerations on product design and therefore on the description of the invention for four different inventions. These inventions were selected at various stages of development. Regardless of stage of development, the marketing and manufacturing reviews resulted in significant changes in design and/or market positioning.

  14. Development and evaluation of a targeted orchard sprayer using machine vision technology

    Directory of Open Access Journals (Sweden)

    H Asaei

    2016-09-01

    Full Text Available Introduction In conventional methods of spraying in orchards, the amount of pesticide sprayed, is not targeted. The pesticide consumption data indicates that the application rate of pesticide in greenhouses and orchards is more than required. Less than 30% of pesticide sprayed actually reaches nursery canopies while the rest are lost and wasted. Nowadays, variable rate spray applicators using intelligent control systems can greatly reduce pesticide use and off-target contamination of environment in nurseries and orchards. In this research a prototype orchard sprayer based on machine vision technology was developed and evaluated. This sprayer performs real-time spraying based on the tree canopy structure and its greenness extent which improves the efficiency of spraying operation in orchards. Materials and Methods The equipment used in this study comprised of three main parts generally: 1- Mechanical Equipment 2- Data collection and image processing system 3- Electronic control system Two booms were designed to support the spray nozzles and to provide flexibility in directing the spray nozzles to the target. The boom comprised two parts, the vertical part and inclined part. The vertical part of the boom was used to spray one side of the trees during forward movement of the tractor and inclined part of the boom was designed to spray the upper half of the tree canopy. Three nozzles were considered on each boom. On the vertical part of the boom, two nozzles were placed, whereas one other nozzle was mounted on the inclined part of the boom. To achieve different tree heights, the vertical part of the boom was able to slide up and down. Labview (version 2011 was used for real time image processing. Images were captured through RGB cameras mounted on a horizontal bar attached on top of the tractor to take images separately for each side of the sprayer. Images were captured from the top of the canopies looking downward. The triggering signal for

  15. Conventional and Innovative Processing of Milk for Yogurt Manufacture; Development of Texture and Flavor: A Review

    Directory of Open Access Journals (Sweden)

    Panagiotis Sfakianakis

    2014-03-01

    Full Text Available Milk and yogurt are important elements of the human diet, due to their high nutritional value and their appealing sensory properties. During milk processing (homogenization, pasteurization and further yogurt manufacture (fermentation physicochemical changes occur that affect the flavor and texture of these products while the development of standardized processes contributes to the development of desirable textural and flavor characteristics. The processes that take place during milk processing and yogurt manufacture with conventional industrial methods, as well as with innovative methods currently proposed (ultra-high pressure, ultrasound, microfluidization, pulsed electric fields, and their effect on the texture and flavor of the final conventional or probiotic/prebiotic products will be presented in this review.

  16. Conventional and Innovative Processing of Milk for Yogurt Manufacture; Development of Texture and Flavor: A Review

    Science.gov (United States)

    Sfakianakis, Panagiotis; Tzia, Constatnina

    2014-01-01

    Milk and yogurt are important elements of the human diet, due to their high nutritional value and their appealing sensory properties. During milk processing (homogenization, pasteurization) and further yogurt manufacture (fermentation) physicochemical changes occur that affect the flavor and texture of these products while the development of standardized processes contributes to the development of desirable textural and flavor characteristics. The processes that take place during milk processing and yogurt manufacture with conventional industrial methods, as well as with innovative methods currently proposed (ultra-high pressure, ultrasound, microfluidization, pulsed electric fields), and their effect on the texture and flavor of the final conventional or probiotic/prebiotic products will be presented in this review. PMID:28234312

  17. The development of manufacturing techniques and philosophies for the cost effective production of modern nuclear transport flasks

    International Nuclear Information System (INIS)

    Balmer, S.L.; Ward, S.

    1997-01-01

    Design changes to enhance the characteristics of a new generation of large transport flasks have created new challenges to manufacturers. New fabrication, manufacturing and handling techniques have been developed but often at significant costs. The paper examines these developments covering two main areas, welding and the application of neutron absorbing material. Whilst designers have looked at enhancing flask performance, they often fail to appreciate that ultimately whatever has been designed, has to be firstly sold' and then manufactured. Optimisation of design must therefore include due consideration of the ultimate clients cost structure and the manufacturing route. The paper suggests that the only way this can be achieved is to adopt a teaming approach between designers and manufacturers. The ultimate choice of manufacturer however is left to the designers who must consider competencies, track record and commitment to assistance prior to entering into an agreement. (Author)

  18. Development of textile-reinforced carbon fibre aluminium composites manufactured with gas pressure infiltration methods

    OpenAIRE

    W. Hufenbach; M. Gude; A. Czulak; J. Śleziona; A. Dolata-Grosz; M. Dyzia

    2009-01-01

    Purpose: The aim of his paper is to show potential of textile-reinforced carbon fibre aluminium composite with advantage of the lightweight construction of structural components subjected to thermo-mechanical stress.Design/methodology/approach: The manufacture of specimens of the carbon fibre-reinforced aluminium was realised with the aid of an advanced differential gas pressure infiltration technique, which was developed at ILK, TU Dresden.Findings: The gas pressure infiltration technology e...

  19. Disposition of Human Resource Development Structure in Manufacturing Firms in Malaysia

    OpenAIRE

    Haslinda Abdullah

    2009-01-01

    Problem statement: Human Resource Development (HRD) is rapidly gaining importance in manufacturing firms in Malaysia, as there are strong driving forces such as legal, financial and infrastructural support from the Government. This is because the Government believes that investment in human capital is key to the success of the countrys economy. However, this strategy may not be effective without the availability of a properly implemented HRD structure. Approach: The aim of this paper is to ex...

  20. Developing a Current Capability Design for Manufacture Framework in the Aerospace Industry

    OpenAIRE

    Whiteside, A.; Shehab, Essam; Beadle, C.; Percival, M.

    2009-01-01

    Organised by: Cranfield University During progressive product design and development in the aerospace industry, a lack of effective communication between the sequential functions of design, manufacturing and assembly often causes delays and setbacks whereby production capabilities are unable to realise design intent in high-complexity product models. As a result, there is a need to formalise the progressive release of an engineering model to production functions during New Prod...

  1. Process development for the manufacturing of state-of-the-art spacer grids

    Energy Technology Data Exchange (ETDEWEB)

    Schebitz, Florian; Dietrich, Matthias [Advanced Nuclear Fuels GmbH, Karlstein (Germany)

    2013-07-01

    At the beginning it was questioned if 'time to market' is really important for the nuclear industry. The clear answer is YES. Even if the development times might be longer compared to projects in other industries it is still beneficial to use concurrent engineering. In the world wide network of manufacturing sites, Advanced Nuclear Fuels GmbH in Karlstein is quite often involved when the development of new processes is necessary. As ANF Karlstein is delivering products around the world the experience with different customer requirements supports an optimized solution in order to fulfill these principle requirements and to deliver state-of-the-art products like spacer grids. Continues feedback from process development already improves the first prototypes. In the meantime ANF Karlstein manufactured the components for both new fuel assembly designs which are introduced as a first set of Lead Fuel Assemblies. For the manufacturing of the next sets of spacer grids (for tests and next series of Lead Fuel Assemblies) the described processes will be used and further improved, so that an industrialized solution is available. (orig.)

  2. Light Vision Color

    Science.gov (United States)

    Valberg, Arne

    2005-04-01

    Light Vision Color takes a well-balanced, interdisciplinary approach to our most important sensory system. The book successfully combines basics in vision sciences with recent developments from different areas such as neuroscience, biophysics, sensory psychology and philosophy. Originally published in 1998 this edition has been extensively revised and updated to include new chapters on clinical problems and eye diseases, low vision rehabilitation and the basic molecular biology and genetics of colour vision. Takes a broad interdisciplinary approach combining basics in vision sciences with the most recent developments in the area Includes an extensive list of technical terms and explanations to encourage student understanding Successfully brings together the most important areas of the subject in to one volume

  3. Design for manufacturing and assembly key performance indicators to support high-speed product development

    DEFF Research Database (Denmark)

    Thompson, Mary Kathryn; Juel Jespersen, Ida Kirstine; Kjærgaard, Thomas

    2018-01-01

    Design for Manufacturing and Assembly (DfMA) has great potential for minimizing late engineering changes (ECs) that impede high-speed product development and delay time-to-profit. However, our understanding of DfMA and its implementation in industry is still incomplete. This paper presents...... an industrial case study on late ECs in high-speed product development and compares the results to other examples from the literature. It then proposes a framework with sets of key performance indicators (KPIs) to measure and improve producability and product quality throughout the product development process....

  4. Work carried out in France on the design, manufacture, handling and development of nuclear fuel

    International Nuclear Information System (INIS)

    Brandt, R.C.; Joly, G.; Gloaguen, A.; Delafosse, J.

    1977-01-01

    Although the ordinary water reactors to be found in France all belong to the PWR type, the fuel used covers a broad range: box assemblies with steel canning at the SENA plant, 15x15 at TIHANGE, 17x17 for 900 MW phases, slug and plate fuel developed by the Atomic Energy Commission and extra-long 17x17 for 1300 MW phases, also being developed. A description of what France is undertaking today with respect to: 1) design; 2) manufacture; 3) management; and 4) development of full assemblies is presented [fr

  5. Development and Hotfire Testing of Additively Manufactured Copper Combustion Chambers for Liquid Rocket Engine Applications

    Science.gov (United States)

    Gradl, Paul R.; Greene, Sandy; Protz, Chris

    2017-01-01

    NASA and industry partners are working towards fabrication process development to reduce costs and schedules associated with manufacturing liquid rocket engine components with the goal of reducing overall mission costs. One such technique being evaluated is powder-bed fusion or selective laser melting (SLM), commonly referred to as additive manufacturing (AM). The NASA Low Cost Upper Stage Propulsion (LCUSP) program was designed to develop processes and material characterization for GRCop-84 (a NASA Glenn Research Center-developed copper, chrome, niobium alloy) commensurate with powder bed AM, evaluate bimetallic deposition, and complete testing of a full scale combustion chamber. As part of this development, the process has been transferred to industry partners to enable a long-term supply chain of monolithic copper combustion chambers. To advance the processes further and allow for optimization with multiple materials, NASA is also investigating the feasibility of bimetallic AM chambers. In addition to the LCUSP program, NASA’s Marshall Space Flight Center (MSFC) has completed a series of development programs and hot-fire tests to demonstrate SLM GRCop-84 and other AM techniques. MSFC’s efforts include a 4,000 pounds-force thrust liquid oxygen/methane (LOX/CH4) combustion chamber. Small thrust chambers for 1,200 pounds-force LOX/hydrogen (H2) applications have also been designed and fabricated with SLM GRCop-84. Similar chambers have also completed development with an Inconel 625 jacket bonded to the GRCop-84 material, evaluating direct metal deposition (DMD) laser- and arc-based techniques. The same technologies for these lower thrust applications are being applied to 25,000-35,000 pounds-force main combustion chamber (MCC) designs. This paper describes the design, development, manufacturing and testing of these numerous combustion chambers, and the associated lessons learned throughout their design and development processes.

  6. Product Development Categorized as Independent Strategic and Innovative Practice: Case from Indian Manufacturing

    Directory of Open Access Journals (Sweden)

    Himanshu Dutt

    2008-06-01

    Full Text Available In recent time, Indian manufacturing has seen technologically intensive and resource optimization based initiatives to satisfy competitive urge and to build or sustain market position. This they do by developing products either strategically or innovatively, but that is hardly distinguished or seen as a separate approach to product development. Strategically, product development is resource optimization based while innovatively, it is product differentiation focused. This paper outlines the strategic and innovative approach to product development and analyzes sector specific role of each in product development. The study is undertaken with nine product development team-leaders and resource-heads, three of each from automobile, steel and textile. It is concluded that textile is strategically skewed toward product development whereas automobile is inclined towards innovative orientation. The biggest limitation of this study is smaller sample-size because respondents are reluctant to disclose new technical initiatives and composition of product development.

  7. Development and Application of the Stereo Vision Tracking System with Virtual Reality

    Directory of Open Access Journals (Sweden)

    Chia-Sui Wang

    2015-01-01

    Full Text Available A virtual reality (VR driver tracking verification system is created, of which the application to stereo image tracking and positioning accuracy is researched in depth. In the research, the feature that the stereo vision system has image depth is utilized to improve the error rate of image tracking and image measurement. In a VR scenario, the function collecting behavioral data of driver was tested. By means of VR, racing operation is simulated and environmental (special weathers such as raining and snowing and artificial (such as sudden crossing road by pedestrians, appearing of vehicles from dead angles, roadblock variables are added as the base for system implementation. In addition, the implementation is performed with human factors engineered according to sudden conditions that may happen easily in driving. From experimental results, it proves that the stereo vision system created by the research has an image depth recognition error rate within 0.011%. The image tracking error rate may be smaller than 2.5%. In the research, the image recognition function of stereo vision is utilized to accomplish the data collection of driver tracking detection. In addition, the environmental conditions of different simulated real scenarios may also be created through VR.

  8. Process development for green part printing using binder jetting additive manufacturing

    Science.gov (United States)

    Miyanaji, Hadi; Orth, Morgan; Akbar, Junaid Muhammad; Yang, Li

    2018-05-01

    Originally developed decades ago, the binder jetting additive manufacturing (BJ-AM) process possesses various advantages compared to other additive manufacturing (AM) technologies such as broad material compatibility and technological expandability. However, the adoption of BJ-AM has been limited by the lack of knowledge with the fundamental understanding of the process principles and characteristics, as well as the relatively few systematic design guideline that are available. In this work, the process design considerations for BJ-AM in green part fabrication were discussed in detail in order to provide a comprehensive perspective of the design for additive manufacturing for the process. Various process factors, including binder saturation, in-process drying, powder spreading, powder feedstock characteristics, binder characteristics and post-process curing, could significantly affect the printing quality of the green parts such as geometrical accuracy and part integrity. For powder feedstock with low flowability, even though process parameters could be optimized to partially offset the printing feasibility issue, the qualities of the green parts will be intrinsically limited due to the existence of large internal voids that are inaccessible to the binder. In addition, during the process development, the balanced combination between the saturation level and in-process drying is of critical importance in the quality control of the green parts.

  9. Manufacturing Process Developments for Regeneratively-Cooled Channel Wall Rocket Nozzles

    Science.gov (United States)

    Gradl, Paul; Brandsmeier, Will

    2016-01-01

    Regeneratively cooled channel wall nozzles incorporate a series of integral coolant channels to contain the coolant to maintain adequate wall temperatures and expand hot gas providing engine thrust and specific impulse. NASA has been evaluating manufacturing techniques targeting large scale channel wall nozzles to support affordability of current and future liquid rocket engine nozzles and thrust chamber assemblies. The development of these large scale manufacturing techniques focus on the liner formation, channel slotting with advanced abrasive water-jet milling techniques and closeout of the coolant channels to replace or augment other cost reduction techniques being evaluated for nozzles. NASA is developing a series of channel closeout techniques including large scale additive manufacturing laser deposition and explosively bonded closeouts. A series of subscale nozzles were completed evaluating these processes. Fabrication of mechanical test and metallography samples, in addition to subscale hardware has focused on Inconel 625, 300 series stainless, aluminum alloys as well as other candidate materials. Evaluations of these techniques are demonstrating potential for significant cost reductions for large scale nozzles and chambers. Hot fire testing is planned using these techniques in the future.

  10. A Strategic Knowledge Map for the Research and Development Department in a Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Śliwa Małgorzata

    2016-01-01

    Full Text Available Knowledge is a corporate resource, being grounds for initiating activities, which is important in a dynamic economy. The difficulties related to obtaining tacit knowledge, related primarily to experience and observation of the knowledge employee (Mendryk, 2011, encourage the companies to use tools supporting knowledge management and location. This article attempts at designing a dedicated, strategic knowledge map for a research and development department in a manufacturing company. Based on the reference works, the detailed characteristics of specific sources of knowledge in a manufacturing company and tools supporting the process of converting the tacit knowledge into explicit one, for example, the knowledge maps, were devised. Then, a strategic knowledge map model was designed for the research and development department (hereinafter abbreviated as SKM – R&D in the manufacturing company, comprising the following components: (1 fields of knowledge, (2 internal and external processes in the R&D department, and (3 sources of knowledge. Then, a practical implementation of the SKM – R&D model was presented.

  11. Dynamic cellular manufacturing system design considering ...

    Indian Academy of Sciences (India)

    Kamal Deep

    cellular manufacturing system in a company is division of ... designed to be assembled from a small number of stan- ..... contingency part process route in addition to the alternate .... istic industrial manufacturing vision considering multiple.

  12. DEVELOPMENT OF INFORMATION TECHNOLOGY STRATEGIC PLANNING FOR MANUFACTURING INDUSTRY (CASE STUDY: PT MCM

    Directory of Open Access Journals (Sweden)

    Leonardus Hardjo

    2013-10-01

    Full Text Available IT Department in PT MCM has to carry out the duties and functions of developing solution to support the business unit in their operation and gain some benefits which should be obtained by using IT in manufacturing such as increasing efficiency, improving the effectivity in making decision and helping to promote the products. This study aims to design information technology strategic planning in accordance with the strategic plan. The research method is using the IT Strategic Planning framework of Alex Cullen and Marc Cecere. This study uses SWOT and IT Balanced Scorecard to analyze the needs of IT at PT MCM. The results of this study are recommended strategic steps to optimize the implementation of IT in the company to improve the performance from IT division to obtain the benefits by implementing IT in manufacturing and to form IT Blueprint, which is part of the information technology strategic plan in PT MCM.

  13. Development and fabrication of patient-specific knee implant using additive manufacturing techniques

    Science.gov (United States)

    Zammit, Robert; Rochman, Arif

    2017-10-01

    Total knee replacement is the most effective treatment to relief pain and restore normal function in a diseased knee joint. The aim of this research was to develop a patient-specific knee implant which can be fabricated using additive manufacturing techniques and has reduced wear rates using a highly wear resistant materials. The proposed design was chosen based on implant requirements, such as reduction in wear rates as well as strong fixation. The patient-specific knee implant improves on conventional knee implants by modifying the articulating surfaces and bone-implant interfaces. Moreover, tribological tests of different polymeric wear couples were carried out to determine the optimal materials to use for the articulating surfaces. Finite element analysis was utilized to evaluate the stresses sustained by the proposed design. Finally, the patient-specific knee implant was successfully built using additive manufacturing techniques.

  14. TF4SM: A Framework for Developing Traceability Solutions in Small Manufacturing Companies

    Science.gov (United States)

    Bordel Sánchez, Borja; Alcarria, Ramón; Martín, Diego; Robles, Tomás

    2015-01-01

    Nowadays, manufacturing processes have become highly complex. Besides, more and more, governmental institutions require companies to implement systems to trace a product’s life (especially for foods, clinical materials or similar items). In this paper, we propose a new framework, based on cyber-physical systems, for developing traceability systems in small manufacturing companies (which because of their size cannot implement other commercial products). We propose a general theoretical framework, study the requirements of these companies in relation to traceability systems, propose a reference architecture based on both previous elements and build the first minimum functional prototype, to compare our solution to a traditional tag-based traceability system. Results show that our system reduces the number of inefficiencies and reaction time. PMID:26610509

  15. A new vision of plasma facing components

    Energy Technology Data Exchange (ETDEWEB)

    Nygren, Richard E., E-mail: renygre@sandia.gov [Sandia National Laboratories, Albuquerque, NM (United States); Youchison, Dennis L. [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Wirth, Brian D. [University of Tennessee, Knoxville, TN (United States); Snead, Lance L.

    2016-11-01

    Highlights: • New approach recommended to develop refractory fusion plasma facing components. • Need to develop engineered materials architecture with nano-features. • Need to develop PFCs with gas jet cooling with very fine scale for jet arrays. • Emphasis on role of additive manufacturing as needed method for fabrication. - Abstract: This paper advances a vision for plasma facing components (PFCs) that includes the following points. The solution for plasma facing materials likely consists of engineered structures in which the layer of plasma facing material (PFM) is integrated with an engineered structure that cools the PFM and may also transition with graded composition. The key to achieving this PFC architecture will likely lie in advanced manufacturing methods, e.g., additive manufacturing, that can produce layers with controlled porosity and features such as micro-fibers and/or nano-particles that can collect He and transmutation products, limit tritium retention, and do all this in a way that maintains adequate robustness for a satisfactory lifetime. This vision has significant implications for how we structure a development program.

  16. Collective Hunger in the Vision of Amartya Sen as One of the Impeditive Factors of Sustainable Human Development

    Directory of Open Access Journals (Sweden)

    Eduardo Torres Roberti

    2016-12-01

    Full Text Available The study aims at collective hunger in the vision of Amartya Sen as one of the impeding factors of Sustainable Human Development. In the economist's view, collective hunger goes beyond chronic hunger, involves a sudden outbreak of deprivation for a portion of the population. To eliminate hunger in the modern world, it is crucial to understand the cause of collective hunger in a broad way, and not just because of some mechanical imbalance between food and population. By illustrating the deprivation of liberty, child labor is included as one of the impediments to sustainable human development.

  17. Vision Screening

    Science.gov (United States)

    1993-01-01

    The Visi Screen OSS-C, marketed by Vision Research Corporation, incorporates image processing technology originally developed by Marshall Space Flight Center. Its advantage in eye screening is speed. Because it requires no response from a subject, it can be used to detect eye problems in very young children. An electronic flash from a 35 millimeter camera sends light into a child's eyes, which is reflected back to the camera lens. The photorefractor then analyzes the retinal reflexes generated and produces an image of the child's eyes, which enables a trained observer to identify any defects. The device is used by pediatricians, day care centers and civic organizations that concentrate on children with special needs.

  18. Development of a manufacturing technology of compacted graphite iron castings from a cupola furnace

    Directory of Open Access Journals (Sweden)

    O. Bouska

    2012-01-01

    Full Text Available Compacted graphite iron, also known as vermicular cast iron or semiductile cast iron is a modern material, the production of which is increasing globaly. Recently this material has been very often used in automotive industry. This paper reviews some findigs gained during the development of the manufacturing technology of compacted graphite iron under the conditions in Slévárna Heunisch Brno, Ltd. The new technology assumes usage of cupola furnace for melting and is beeing developed for production of castings weighing up to 300 kilograms poured into bentonite sand moulds.

  19. Advanced Manufacturing Technologies

    Science.gov (United States)

    Fikes, John

    2016-01-01

    Advanced Manufacturing Technologies (AMT) is developing and maturing innovative and advanced manufacturing technologies that will enable more capable and lower-cost spacecraft, launch vehicles and infrastructure to enable exploration missions. The technologies will utilize cutting edge materials and emerging capabilities including metallic processes, additive manufacturing, composites, and digital manufacturing. The AMT project supports the National Manufacturing Initiative involving collaboration with other government agencies.

  20. Living with vision loss

    Science.gov (United States)

    Diabetes - vision loss; Retinopathy - vision loss; Low vision; Blindness - vision loss ... of visual aids. Some options include: Magnifiers High power reading glasses Devices that make it easier to ...

  1. Micro Vision

    OpenAIRE

    Ohba, Kohtaro; Ohara, Kenichi

    2007-01-01

    In the field of the micro vision, there are few researches compared with macro environment. However, applying to the study result for macro computer vision technique, you can measure and observe the micro environment. Moreover, based on the effects of micro environment, it is possible to discovery the new theories and new techniques.

  2. Development of the supply chain oriented quality assurance system for aerospace manufacturing SMEs and its implementation perspectives

    Science.gov (United States)

    Hussein, Abdullahi; Cheng, Kai

    2016-10-01

    Aerospace manufacturing SMEs are continuously facing the challenge on managing their supply chain and complying with the aerospace manufacturing quality standard requirement due to their lack of resources and the nature of business. In this paper, the ERP system based approach is presented to quality control and assurance work in light of seamless integration of in-process production data and information internally and therefore managing suppliers more effectively and efficiently. The Aerospace Manufacturing Quality Assurance Standard (BS/EN9100) is one of the most recognised and essential protocols for developing the industry-operated-and-driven quality assurance systems. The research investigates using the ERP based system as an enabler to implement BS/EN9100 quality management system at manufacturing SMEs and the associated implementation and application perspectives. An application case study on a manufacturing SME is presented by using the SAP based implementation, which helps further evaluate and validate the approach and application system development.

  3. Development of materials and manufacturing technologies for Indian fast reactor programme

    International Nuclear Information System (INIS)

    Raj, Baldev; Jayakumar, T.; Bhaduri, A.K.; Mandal, Sumantra

    2010-01-01

    Fast Breeder Reactors (FBRs) are vital towards meeting security and sustainability of energy for the growing economy of India. The development of FBRs necessitates extensive research and development in domains of materials and manufacturing technologies in association with a wide spectrum of disciplines and their inter-twining to meet the challenging technology. The paper highlight the work and the approaches adopted for the successful deployment of materials, manufacturing and inspection technologies for the in-core and structural components of current and future Indian Fast Breeder Reactor Programme. Indigenous development of in-core materials viz. Titanium modified austenitic stainless steel (Alloy D9) and its variants, ferritic/martensitic oxide-dispersion strengthened (ODS) steels as well as structural materials viz. 316L(N) stainless steel and modified 9Cr-1Mo have been achieved through synergistic interactions between Indira Gandhi Centre for Atomic Research (IGCAR), education and research institutes and industries. Robust manufacturing technology has been established for forming and joining of various components of 500 MWe Prototype Fast Breeder Reactor (PFBR) through 'science-based technology' approach. To achieve the strict quality standards of formed parts in terms of geometrical tolerances, residual stresses and microstructural defects, FEM-based modelling and experimental validation was carried out for estimation of spring-back during forming of multiple curvature thick plantes. Optimization of grain boundary character distribution in Alloy D9 was carried out by adopting the grain boundary engineering approach to reduce radiation induced segregation. Extensive welding is involved in the fabrication of reactor vessels, piping, steam generators, fuel sub-assemblies etc. Activated Tungsten Inert Gas Welding process along with activated flux developed at IGCAR has been successfully used in fabrication of dummy fuel subassemblies (DFSA) required for testing

  4. Development of materials and manufacturing technologies for Indian fast reactor programme

    Energy Technology Data Exchange (ETDEWEB)

    Raj, Baldev; Jayakumar, T.; Bhaduri, A.K.; Mandal, Sumantra [Indira Gandhi Centre for Atomic Research, Kalpakkam (India)

    2010-07-01

    Fast Breeder Reactors (FBRs) are vital towards meeting security and sustainability of energy for the growing economy of India. The development of FBRs necessitates extensive research and development in domains of materials and manufacturing technologies in association with a wide spectrum of disciplines and their inter-twining to meet the challenging technology. The paper highlight the work and the approaches adopted for the successful deployment of materials, manufacturing and inspection technologies for the in-core and structural components of current and future Indian Fast Breeder Reactor Programme. Indigenous development of in-core materials viz. Titanium modified austenitic stainless steel (Alloy D9) and its variants, ferritic/martensitic oxide-dispersion strengthened (ODS) steels as well as structural materials viz. 316L(N) stainless steel and modified 9Cr-1Mo have been achieved through synergistic interactions between Indira Gandhi Centre for Atomic Research (IGCAR), education and research institutes and industries. Robust manufacturing technology has been established for forming and joining of various components of 500 MWe Prototype Fast Breeder Reactor (PFBR) through 'science-based technology' approach. To achieve the strict quality standards of formed parts in terms of geometrical tolerances, residual stresses and microstructural defects, FEM-based modelling and experimental validation was carried out for estimation of spring-back during forming of multiple curvature thick plantes. Optimization of grain boundary character distribution in Alloy D9 was carried out by adopting the grain boundary engineering approach to reduce radiation induced segregation. Extensive welding is involved in the fabrication of reactor vessels, piping, steam generators, fuel sub-assemblies etc. Activated Tungsten Inert Gas Welding process along with activated flux developed at IGCAR has been successfully used in fabrication of dummy fuel subassemblies (DFSA) required

  5. Hot forming and quenching pilot process development for low cost and low environmental impact manufacturing.

    Science.gov (United States)

    Hall, Roger W.; Foster, Alistair; Herrmann Praturlon, Anja

    2017-09-01

    The Hot Forming and in-tool Quenching (HFQ®) process is a proven technique to enable complex shaped stampings to be manufactured from high strength aluminium. Its widespread uptake for high volume production will be maximised if it is able to wholly amortise the additional investment cost of this process compared to conventional deep drawing techniques. This paper discusses the use of three techniques to guide some of the development decisions taken during upscaling of the HFQ® process. Modelling of Process timing, Cost and Life-cycle impact were found to be effective tools to identify where development budget could be focused in order to be able to manufacture low cost panels of different sizes from many different alloys in a sustainable way. The results confirm that raw material cost, panel trimming, and artificial ageing were some of the highest contributing factors to final component cost. Additionally, heat treatment and lubricant removal stages played a significant role in the overall life-cycle assessment of the final products. These findings confirmed development priorities as novel furnace design, fast artificial ageing and low-cost alloy development.

  6. Development Algorithm of the Technological Process of Manufacturing Gas Turbine Parts by Selective Laser Melting

    Science.gov (United States)

    Sotov, A. V.; Agapovichev, A. V.; Smelov, V. G.; Kyarimov, R. R.

    2018-01-01

    The technology of the selective laser melting (SLM) allows making products from powders of aluminum, titanium, heat-resistant alloys and stainless steels. Today the use of SLM technology develops at manufacture of the functional parts. This in turn requires development of a methodology projection of technological processes (TP) for manufacturing parts including databases of standard TP. Use of a technique will allow to exclude influence of technologist’s qualification on made products quality, and also to reduce labor input and energy consumption by development of TP due to use of the databases of standard TP integrated into a methodology. As approbation of the developed methodology the research of influence of the modes of a laser emission on a roughness of a surface of synthesized material was presented. It is established that the best values of a roughness of exemplars in the longitudinal and transversal directions make 1.98 μm and 3.59 μm respectively. These values of a roughness were received at specific density of energy 6.25 J/mm2 that corresponds to power and the speed of scanning of 200 W and 400 mm/s, respectively, and a hatch distance of 0.08 mm.

  7. North Carolina's direct care workforce development journey: the case of the North Carolina New Organizational Vision Award Partner Team.

    Science.gov (United States)

    Brannon, S Diane; Kemper, Peter; Barry, Theresa

    2009-01-01

    Better Jobs Better Care was a five-state direct care workforce demonstration designed to change policy and management practices that influence recruitment and retention of direct care workers, problems that continue to challenge providers. One of the projects, the North Carolina Partner Team, developed a unified approach in which skilled nursing, home care, and assisted living providers could be rewarded for meeting standards of workplace excellence. This case study documents the complex adaptive system agents and processes that coalesced to result in legislation recognizing the North Carolina New Organizational Vision Award. We used a holistic, single-case study design. Qualitative data from project work plans and progress reports as well as notes from interviews with key stakeholders and observation of meetings were coded into a simple rubric consisting of characteristics of complex adaptive systems. Key system agents in the state set the stage for the successful multistakeholder coalition. These included leadership by the North Carolina Department of Health and Human Services and a several year effort to develop a unifying vision for workforce development. Grant resources were used to facilitate both content and process work. Structure was allowed to emerge as needed. The coalition's own development is shown to have changed the context from which it was derived. An inclusive and iterative process produced detailed standards and measures for the voluntary recognition process. With effective facilitation, the interests of the multiple stakeholders coalesced into a policy response that encourages practice changes. Implications for managing change-oriented coalitions are discussed.

  8. Development and manufacture of ultra-fine NbTi filament wires at ALSTHOM

    International Nuclear Information System (INIS)

    Hoang, G.K.; Laumond, Y.; Sabrie, J.L.; Dubots, P.

    1986-01-01

    Ultra-fine NbTi filament wires have been developed and manufactured by ALSTHOM. It is now possible to produce industrial copper -copper-nickel matrix wires with 0.6 mu m NbTi filaments for use in 50 / 60 Hz machines. Smaller filaments with diameters down to 0.08 mu m have been obtained with 254 100 filament wire samples. Studies are now being carried out on copper matrix conductors to reduce the filament diameter. The first results show that it is possible to obtain submicron filaments even in copper matrix wires

  9. The development of a commercial MOX fuel manufacturing capability in the U.K

    International Nuclear Information System (INIS)

    Macphee, D.S.; Young, M.P.

    1995-01-01

    BNFL is implementing a strategy to establish a commercial MOX manufacturing capability within the UK. The design and provision of the fabrication plants is incorporating the considerable experience within the Company of MOX technology, fuel fabrication and nuclear plant design. The first phase of the strategy is complete with the successful operation of the Demonstration Facility. The development programmes supporting the increased scale of operation for a commercial scale facility are substantially complete. Design and construction of a 120t HM/year plant is well advanced supported by a substantial in-house design and project management team. (author)

  10. Development of an ear cap in chronic suppurative otitis media using additive manufacturing and TRIZ.

    Science.gov (United States)

    Mawale, Mahesh B; Kuthe, Abhaykumar; Mawale, Anupama M; Dahake, Sandeep W

    2018-06-01

    The prevalence rate of chronic suppurative otitis media is high and its treatment continues to be a challenge for the otorhinolaryngologists. Due to middle ear infection, there may be pain, hearing loss and spontaneous rupture of the eardrum which results in perforation. Infections can cause a hole in the eardrum as a side effect of otitis media. The patients suffering from ear perforation or having a hole in eardrum require preventing entry of water in the ear. This article describes the development of ear cap using additive manufacturing and TRIZ (a collaborative tool) to prevent the entry of water in the ear during chronic otitis media.

  11. Quality assurance experience in the manufacture of PFBR reactor vessel during technology development work

    International Nuclear Information System (INIS)

    Shanmugam, K.; Chandramohan, R.; Ramamurthy, M.K.

    1996-01-01

    An efficient and proper implementation of quality assurance in the technology development works of Prototype Fast Breeder Reactor (PFBR) main vessel was undertaken to achieve the desired quality and dimensional accuracy of main vessel. In this paper an attempt has been made to bring out the methods and procedures adopted to implement the quality assurance programme on important activities including approval of documents, material, general requirements for manufacture of SS components, inspection procedures, forming and welding of petals, non-destructive testing etc. (author)

  12. Implementation of a configurable laboratory information management system for use in cellular process development and manufacturing.

    Science.gov (United States)

    Russom, Diana; Ahmed, Amira; Gonzalez, Nancy; Alvarnas, Joseph; DiGiusto, David

    2012-01-01

    Regulatory requirements for the manufacturing of cell products for clinical investigation require a significant level of record-keeping, starting early in process development and continuing through to the execution and requisite follow-up of patients on clinical trials. Central to record-keeping is the management of documentation related to patients, raw materials, processes, assays and facilities. To support these requirements, we evaluated several laboratory information management systems (LIMS), including their cost, flexibility, regulatory compliance, ongoing programming requirements and ability to integrate with laboratory equipment. After selecting a system, we performed a pilot study to develop a user-configurable LIMS for our laboratory in support of our pre-clinical and clinical cell-production activities. We report here on the design and utilization of this system to manage accrual with a healthy blood-donor protocol, as well as manufacturing operations for the production of a master cell bank and several patient-specific stem cell products. The system was used successfully to manage blood donor eligibility, recruiting, appointments, billing and serology, and to provide annual accrual reports. Quality management reporting features of the system were used to capture, report and investigate process and equipment deviations that occurred during the production of a master cell bank and patient products. Overall the system has served to support the compliance requirements of process development and phase I/II clinical trial activities for our laboratory and can be easily modified to meet the needs of similar laboratories.

  13. Manufacturing and maintenance technologies developed for a thick-wall structure of the ITER vacuum vessel

    International Nuclear Information System (INIS)

    Onozuka, M.; Alfile, J.P.; Aubert, Ph.; Dagenais, J.-F.; Grebennikov, D.; Ioki, K.; Jones, L.; Koizumi, K.; Krylov, V.; Maslakowski, J.; Nakahira, M.; Nelson, B.; Punshon, C.; Roy, O.; Schreck, G.

    2001-01-01

    Development of welding, cutting and non-destructive testing (NDT) techniques, and development of remotized systems have been carried out for on-site manufacturing and maintenance of the thick-wall structure of the International Thermonuclear Experimental Reactor (ITER) vacuum vessel (VV). Conventional techniques, including tungsten inert gas welding, plasma cutting, and ultrasonic inspection, have been improved and optimized for the application to thick austenitic stainless steel plates. In addition, advanced methods have been investigated, including reduced-pressure electron-beam and multi-pass neodymium-doped yttrium aluminum garnet (NdYAG) laser welding, NdYAG laser cutting, and electro-magnetic acoustic transducer inspection, to improve cost and technical performance. Two types of remotized systems with different payloads have been investigated and one of them has been fabricated and demonstrated in field joint welding, cutting, and NDT tests on test mockups and full-scale ITER VV sector models. The progress and results of this development to date provide a high level of confidence that the manufacturing and maintenance of the ITER VV is feasible

  14. Manufacturing and maintenance technologies developed for a thick-wall structure of the ITER vacuum vessel

    Energy Technology Data Exchange (ETDEWEB)

    Onozuka, M. E-mail: onozukm@itereu.de; Alfile, J.P.; Aubert, Ph.; Dagenais, J.-F.; Grebennikov, D.; Ioki, K.; Jones, L.; Koizumi, K.; Krylov, V.; Maslakowski, J.; Nakahira, M.; Nelson, B.; Punshon, C.; Roy, O.; Schreck, G

    2001-09-01

    Development of welding, cutting and non-destructive testing (NDT) techniques, and development of remotized systems have been carried out for on-site manufacturing and maintenance of the thick-wall structure of the International Thermonuclear Experimental Reactor (ITER) vacuum vessel (VV). Conventional techniques, including tungsten inert gas welding, plasma cutting, and ultrasonic inspection, have been improved and optimized for the application to thick austenitic stainless steel plates. In addition, advanced methods have been investigated, including reduced-pressure electron-beam and multi-pass neodymium-doped yttrium aluminum garnet (NdYAG) laser welding, NdYAG laser cutting, and electro-magnetic acoustic transducer inspection, to improve cost and technical performance. Two types of remotized systems with different payloads have been investigated and one of them has been fabricated and demonstrated in field joint welding, cutting, and NDT tests on test mockups and full-scale ITER VV sector models. The progress and results of this development to date provide a high level of confidence that the manufacturing and maintenance of the ITER VV is feasible.

  15. Geneva-Seattle collaboration in support of developing country vaccine manufacturing.

    Science.gov (United States)

    Stevenson, Michael A

    2018-04-01

    Vaccines were once produced almost exclusively by state-supported entities. While they remain essential tools for public health protection, the majority of the world's governments have allowed industry to assume responsibility for this function. This is significant because while the international harmonisation of quality assurance standards have effectively increased vaccine safety, they have also reduced the number of developing country vaccine producers, and Northern multinational pharmaceutical companies have shown little interest in offering the range of low-priced products needed in low and middle-income-country contexts. This article examines how public-private collaboration is relevant to contemporary efforts aimed at strengthening developing country manufacturers' capacity to produce high-quality, low-priced vaccines. Specifically, it casts light on the important and largely complimentary roles of the World Health Organization, The Bill and Melinda Gates Foundation, and the Seattle-based non-profit PATH, in this process. The take away message is that external support remains critical to ensuring that developing country vaccine manufacturers have the tools needed to produce for both domestic and global markets, and the United Nations supply chain, and collaboration at the public-private interface is driving organisational innovation focused on meeting these goals.

  16. Agent-Oriented Embedded Control System Design and Development of a Vision-Based Automated Guided Vehicle

    Directory of Open Access Journals (Sweden)

    Wu Xing

    2012-07-01

    Full Text Available This paper presents a control system design and development approach for a vision-based automated guided vehicle (AGV based on the multi-agent system (MAS methodology and embedded system resources. A three-phase agent-oriented design methodology Prometheus is used to analyse system functions, construct operation scenarios, define agent types and design the MAS coordination mechanism. The control system is then developed in an embedded implementation containing a digital signal processor (DSP and an advanced RISC machine (ARM by using the multitasking processing capacity of multiple microprocessors and system services of a real-time operating system (RTOS. As a paradigm, an onboard embedded controller is designed and developed for the AGV with a camera detecting guiding landmarks, and the entire procedure has a high efficiency and a clear hierarchy. A vision guidance experiment for our AGV is carried out in a space-limited laboratory environment to verify the perception capacity and the onboard intelligence of the agent-oriented embedded control system.

  17. Feature-Free Activity Classification of Inertial Sensor Data With Machine Vision Techniques: Method, Development, and Evaluation.

    Science.gov (United States)

    Dominguez Veiga, Jose Juan; O'Reilly, Martin; Whelan, Darragh; Caulfield, Brian; Ward, Tomas E

    2017-08-04

    Inertial sensors are one of the most commonly used sources of data for human activity recognition (HAR) and exercise detection (ED) tasks. The time series produced by these sensors are generally analyzed through numerical methods. Machine learning techniques such as random forests or support vector machines are popular in this field for classification efforts, but they need to be supported through the isolation of a potentially large number of additionally crafted features derived from the raw data. This feature preprocessing step can involve nontrivial digital signal processing (DSP) techniques. However, in many cases, the researchers interested in this type of activity recognition problems do not possess the necessary technical background for this feature-set development. The study aimed to present a novel application of established machine vision methods to provide interested researchers with an easier entry path into the HAR and ED fields. This can be achieved by removing the need for deep DSP skills through the use of transfer learning. This can be done by using a pretrained convolutional neural network (CNN) developed for machine vision purposes for exercise classification effort. The new method should simply require researchers to generate plots of the signals that they would like to build classifiers with, store them as images, and then place them in folders according to their training label before retraining the network. We applied a CNN, an established machine vision technique, to the task of ED. Tensorflow, a high-level framework for machine learning, was used to facilitate infrastructure needs. Simple time series plots generated directly from accelerometer and gyroscope signals are used to retrain an openly available neural network (Inception), originally developed for machine vision tasks. Data from 82 healthy volunteers, performing 5 different exercises while wearing a lumbar-worn inertial measurement unit (IMU), was collected. The ability of the

  18. Micro Manufacturing

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    Manufacturing deals with systems that include products, processes, materials and production systems. These systems have functional requirements, constraints, design parameters and process variables. They must be decomposed in a systematic manner to achieve the best possible system performance....... If a micro manufacturing system isn’t designed rationally and correctly, it will be high-cost, unreliable, and not robust. For micro products and systems it is a continuously increasing challenge to create the operational basis for an industrial production. As the products through product development...... processes are made applicable to a large number of customers, the pressure in regard to developing production technologies that make it possible to produce the products at a reasonable price and in large numbers is growing. The micro/nano manufacturing programme at the Department of Manufacturing...

  19. Machine vision systems using machine learning for industrial product inspection

    Science.gov (United States)

    Lu, Yi; Chen, Tie Q.; Chen, Jie; Zhang, Jian; Tisler, Anthony

    2002-02-01

    Machine vision inspection requires efficient processing time and accurate results. In this paper, we present a machine vision inspection architecture, SMV (Smart Machine Vision). SMV decomposes a machine vision inspection problem into two stages, Learning Inspection Features (LIF), and On-Line Inspection (OLI). The LIF is designed to learn visual inspection features from design data and/or from inspection products. During the OLI stage, the inspection system uses the knowledge learnt by the LIF component to inspect the visual features of products. In this paper we will present two machine vision inspection systems developed under the SMV architecture for two different types of products, Printed Circuit Board (PCB) and Vacuum Florescent Displaying (VFD) boards. In the VFD board inspection system, the LIF component learns inspection features from a VFD board and its displaying patterns. In the PCB board inspection system, the LIF learns the inspection features from the CAD file of a PCB board. In both systems, the LIF component also incorporates interactive learning to make the inspection system more powerful and efficient. The VFD system has been deployed successfully in three different manufacturing companies and the PCB inspection system is the process of being deployed in a manufacturing plant.

  20. Stereo Vision Inside Tire

    Science.gov (United States)

    2015-08-21

    1 Stereo Vision Inside Tire P.S. Els C.M. Becker University of Pretoria W911NF-14-1-0590 Final...Stereo Vision Inside Tire 5a. CONTRACT NUMBER W911NF-14-1-0590 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Prof PS Els CM...on the development of a stereo vision system that can be mounted inside a rolling tire , known as T2-CAM for Tire -Terrain CAMera. The T2-CAM system

  1. The State of the Art Report on the Development and Manufacturing Technology of Test Blanket Module

    International Nuclear Information System (INIS)

    Lee, J. S.; Jeong, Y. H.; Park, S. Y.; Lee, M. H.; Choi, B. K.; Baek, J. H.; Park, J. Y.; Kim, J. H.; Kim, H. G.; Kim, K. H.

    2006-07-01

    The main objective of the present R and D on breeder blanket is the development of test blanket modules (TBMs) to be installed and tested in International Thermonuclear Experimental Reactor (ITER). In the program of the blanket development, a blanket module test in the ITER is scheduled from the beginning of the ITER operation, and the performance test of TBM in ITER is the most important milestone for the development of the DEMO blanket. The fabrication of TBMs has been required to test the basic performance of the DEMO blanket, i.e., tritium production/recovery, high-grade heat generation and radiation shielding. Therefore, the integration of the TBM systems into ITER has been investigated with the aim to check the safety, reliability and compatibility under nuclear fusion state. For this reason, in the Test Blanket Working Group (TBWG) as an activity of the International Energy Association (IEA), a variety of ITER TBMs have been proposed and investigated by each party: helium-cooled ceramic (WSG-1), helium-cooled LiPb (WSG-2), water-cooled ceramic (WSG-3), self-cooled lithium (WSG-4) and self-cooled molten salt (WSG-5) blanket systems. Because we are still deficient in investigation of TBM development, the need of development became pressing. In this report, for the development of TBM sub-module and mock-up, it is necessary to analyze and examine the state of the art on the development of manufacturing technology of TBM in other countries. And we will be applied as basic data to establish a manufacturing technology

  2. Development of Manufacturing Method of Highly Functional Material Gallic acid-CLA Ester Using Irradiation

    International Nuclear Information System (INIS)

    Cho, C. H.; Byun, M. W.; Jeong, I. Y.; Kim, D. H.

    2006-01-01

    Increasing interest and current trends for natural materials with various health beneficial functions by radiation (RT)-biotechnology (BT) fusion by developed countries. However, the information and development of new functional materials using the RT-BT fusion technology is still limited. The target material developed and manufactured by RT-BT fusion technology may have a multi-functional effect on human health and it can be applied for pharmaceutical materials as well as functional food ingredient. The market of functional new materials has been grown dramatically and a multi-functional material manufactured by RT-BT fusion technology may have a great economic impact for both the domestic and overseas market. Development of GA-CLA ester by chemical synthetic method. Transformation of linoleic acid to conjugated linoleic acid by irradiation. Identification and confirmation of the biological functions including antioxidative, cancer cell proliferation inhibition, anti-microbial, enhancement of immune response and lipid metabolism of GA-CLA ester. Increase industrial applicability of the new materials. Development of GA-CLA ester by chemical synthetic method(2 patents submitted). Development of the optimum methodology of GA-CLA and its derivative, octadeca-9,12-dienyl-3,4,5-trihydroxy benzoate). Identification and confirmation of biological activities of GA-CLA. Extramural funding from the Ministry of Commerce, Industry, and Energy subjected by gallic acid-fatty acid derivatives (205,000,000 Won). Provides the basic data for successful project 'Development of cosmeceutical and cosmetics using gallic acid fatty acid derivatives' funded by Ministry of Commerce, Industry, and Energy and collaboration with the Technology-invested venture company, SunBiotech, Co. and problem-solving for industrial application. Complete the patent procedure and publish the results to international or domestic peer-reviewed journals

  3. Exploring barriers and opportunities in adopting crowdsourcing based new product development in manufacturing SMEs

    Science.gov (United States)

    Qin, Shengfeng; Van der Velde, David; Chatzakis, Emmanouil; McStea, Terry; Smith, Neil

    2016-10-01

    Crowdsourcing is an innovative business practice of obtaining needed services, ideas, or content or even funds by soliciting contributions from a large group of people (the `Crowd'). The potential benefits of utilizing crowdsourcing in product design are well-documented, but little research exists on what are the barriers and opportunities in adopting crowdsourcing in new product development (NPD) of manufacturing SMEs. In order to answer the above questions, a Proof of Market study is carried out on crowdsourcing-based product design under an Innovate UK funded Smart project, which aims at identifying the needs, challenges and future development opportunities associated with adopting crowdsourcing strategies for NPD. The research findings from this study are reported here and can be used to guide future development of crowdsourcing-based collaborative design methods and tools and provide some practical references for industry to adopt this new and emerging collaborative design method in their business.

  4. Development of yarn breakage detection software system based on machine vision

    Science.gov (United States)

    Wang, Wenyuan; Zhou, Ping; Lin, Xiangyu

    2017-10-01

    For questions spinning mills and yarn breakage cannot be detected in a timely manner, and save the cost of textile enterprises. This paper presents a software system based on computer vision for real-time detection of yarn breakage. The system and Windows8.1 system Tablet PC, cloud server to complete the yarn breakage detection and management. Running on the Tablet PC software system is designed to collect yarn and location information for analysis and processing. And will be processed after the information through the Wi-Fi and http protocol sent to the cloud server to store in the Microsoft SQL2008 database. In order to follow up on the yarn break information query and management. Finally sent to the local display on time display, and remind the operator to deal with broken yarn. The experimental results show that the system of missed test rate not more than 5%o, and no error detection.

  5. Development of a teaching system for an industrial robot using stereo vision

    Science.gov (United States)

    Ikezawa, Kazuya; Konishi, Yasuo; Ishigaki, Hiroyuki

    1997-12-01

    The teaching and playback method is mainly a teaching technique for industrial robots. However, this technique takes time and effort in order to teach. In this study, a new teaching algorithm using stereo vision based on human demonstrations in front of two cameras is proposed. In the proposed teaching algorithm, a robot is controlled repetitively according to angles determined by the fuzzy sets theory until it reaches an instructed teaching point, which is relayed through cameras by an operator. The angles are recorded and used later in playback. The major advantage of this algorithm is that no calibrations are needed. This is because the fuzzy sets theory, which is able to express qualitatively the control commands to the robot, is used instead of conventional kinematic equations. Thus, a simple and easy teaching operation is realized with this teaching algorithm. Simulations and experiments have been performed on the proposed teaching system, and data from testing has confirmed the usefulness of our design.

  6. Development of coatings for ultrasonic additive manufacturing sonotrode using laser direct metal deposition process

    Energy Technology Data Exchange (ETDEWEB)

    Niyanth S, Niyanth [ORNL; Dehoff, Ryan R [ORNL; Jordan, Brian H [ORNL; Babu, Sudarsanam Suresh [ORNL

    2016-10-01

    ORNL partnered with Fabrisonic, LLC to develop galling resistant hard facing coatings on sonotrodes used to fabricate 3D printed materials using ultrasonic additive manufacturing. The development and deployment of a coated sonotrode is expected to push the existing state of the art to facilitate the solidstate additive manufacturing of hard steels and titanium alloys. To this effect a structurally amorphous stainless steel material and cobalt chrome material were deposited on the sonotrode material. Both the deposits showed good adhesion to the substrate. The coatings made using the structurally amorphous steel materials showed cracking during the initial trials and cracking was eliminated by deposition on a preheated substrate. Both the coatings show hardness in excess of 600 HVN. Thus the phase 1 of this project has been used to identify suitable materials to use to coat the sonotrode. Despite the fact that successful deposits were obtained, the coatings need to be evaluated by performing detailed galling tests at various temperatures. In addition field tests are also necessary to test the stability of these coatings in a high cycle ultrasonic vibration mode. If awarded, phase 2 of the project would be used to optimize the composition of the deposit material to maximize galling resistance. The industrial partner would then use the coated sonotrode to fabricate builds made of austenitic stainless steel to test the viability of using a coated sonotrode.

  7. Development of a system based on 3D vision, interactive virtual environments, ergonometric signals and a humanoid for stroke rehabilitation.

    Science.gov (United States)

    Ibarra Zannatha, Juan Manuel; Tamayo, Alejandro Justo Malo; Sánchez, Angel David Gómez; Delgado, Jorge Enrique Lavín; Cheu, Luis Eduardo Rodríguez; Arévalo, Wilson Alexander Sierra

    2013-11-01

    This paper presents a stroke rehabilitation (SR) system for the upper limbs, developed as an interactive virtual environment (IVE) based on a commercial 3D vision system (a Microsoft Kinect), a humanoid robot (an Aldebaran's Nao), and devices producing ergonometric signals. In one environment, the rehabilitation routines, developed by specialists, are presented to the patient simultaneously by the humanoid and an avatar inside the IVE. The patient follows the rehabilitation task, while his avatar copies his gestures that are captured by the Kinect 3D vision system. The information of the patient movements, together with the signals obtained from the ergonometric measurement devices, is used also to supervise and to evaluate the rehabilitation progress. The IVE can also present an RGB image of the patient. In another environment, that uses the same base elements, four game routines--Touch the balls 1 and 2, Simon says, and Follow the point--are used for rehabilitation. These environments are designed to create a positive influence in the rehabilitation process, reduce costs, and engage the patient. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  8. Development of hybrid lifecycle cost estimating tool (HLCET) for manufacturing influenced design tradeoff

    Science.gov (United States)

    Sirirojvisuth, Apinut

    In complex aerospace system design, making an effective design decision requires multidisciplinary knowledge from both product and process perspectives. Integrating manufacturing considerations into the design process is most valuable during the early design stages since designers have more freedom to integrate new ideas when changes are relatively inexpensive in terms of time and effort. Several metrics related to manufacturability are cost, time, and manufacturing readiness level (MRL). Yet, there is a lack of structured methodology that quantifies how changes in the design decisions impact these metrics. As a result, a new set of integrated cost analysis tools are proposed in this study to quantify the impacts. Equally important is the capability to integrate this new cost tool into the existing design methodologies without sacrificing agility and flexibility required during the early design phases. To demonstrate the applicability of this concept, a ModelCenter environment is used to develop software architecture that represents Integrated Product and Process Development (IPPD) methodology used in several aerospace systems designs. The environment seamlessly integrates product and process analysis tools and makes effective transition from one design phase to the other while retaining knowledge gained a priori. Then, an advanced cost estimating tool called Hybrid Lifecycle Cost Estimating Tool (HLCET), a hybrid combination of weight-, process-, and activity-based estimating techniques, is integrated with the design framework. A new weight-based lifecycle cost model is created based on Tailored Cost Model (TCM) equations [3]. This lifecycle cost tool estimates the program cost based on vehicle component weights and programmatic assumptions. Additional high fidelity cost tools like process-based and activity-based cost analysis methods can be used to modify the baseline TCM result as more knowledge is accumulated over design iterations. Therefore, with this

  9. Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing.

    Science.gov (United States)

    Goyanes, Alvaro; Fina, Fabrizio; Martorana, Annalisa; Sedough, Daniel; Gaisford, Simon; Basit, Abdul W

    2017-07-15

    The aim of this study was to manufacture 3D printed tablets (printlets) from enteric polymers by single filament fused deposition modeling (FDM) 3D printing (3DP). Hot melt extrusion was used to generate paracetamol-loaded filaments from three different grades of the pharmaceutical excipient hypromellose acetate succinate (HPMCAS), grades LG, MG and HG. One-step 3DP was used to process these filaments into enteric printlets incorporating up to 50% drug loading with two different infill percentages (20 and 100%). X-ray Micro Computed Tomography (Micro-CT) analysis revealed that printlets with 20% infill had cavities in the core compared to 100% infill, and that the density of the 50% drug loading printlets was higher than the equivalent formulations loaded with 5% drug. In biorelevant bicarbonate dissolution media, drug release from the printlets was dependent on the polymer composition, drug loading and the internal structure of the formulations. All HPMCAS-based printlets showed delayed drug release properties, and in the intestinal conditions, drug release was faster from the printlets prepared with polymers with a lower pH-threshold: HPMCAS LG > HPMCAS MG > HPMCAS HG. These results confirm that FDM 3D printing makes it possible not only to manufacture delayed release printlets without the need for an outer enteric coating, but it is also feasible to adapt the release profile in response to the personal characteristics of the patient, realizing the full potential of additive manufacturing in the development of personalised dose medicines. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Status of the Space-Rated Lithium-Ion Battery Advanced Development Project in Support of the Exploration Vision

    Science.gov (United States)

    Miller, Thomas

    2007-01-01

    The NASA Glenn Research Center (GRC), along with the Goddard Space Flight Center (GSFC), Jet Propulsion Laboratory (JPL), Johnson Space Center (JSC), Marshall Space Flight Center (MSFC), and industry partners, is leading a space-rated lithium-ion advanced development battery effort to support the vision for Exploration. This effort addresses the lithium-ion battery portion of the Energy Storage Project under the Exploration Technology Development Program. Key discussions focus on the lithium-ion cell component development activities, a common lithium-ion battery module, test and demonstration of charge/discharge cycle life performance and safety characterization. A review of the space-rated lithium-ion battery project will be presented highlighting the technical accomplishments during the past year.

  11. Development of a new bioprocess scheme using frozen seed train intermediates to initiate CHO cell culture manufacturing campaigns.

    Science.gov (United States)

    Seth, Gargi; Hamilton, Robert W; Stapp, Thomas R; Zheng, Lisa; Meier, Angela; Petty, Krista; Leung, Stephenie; Chary, Srikanth

    2013-05-01

    Agility to schedule and execute cell culture manufacturing campaigns quickly in a multi-product facility will play a key role in meeting the growing demand for therapeutic proteins. In an effort to shorten campaign timelines, maximize plant flexibility and resource utilization, we investigated the initiation of cell culture manufacturing campaigns using CHO cells cryopreserved in large volume bags in place of the seed train process flows that are conventionally used in cell culture manufacturing. This approach, termed FASTEC (Frozen Accelerated Seed Train for Execution of a Campaign), involves cultivating cells to high density in a perfusion bioreactor, and cryopreserving cells in multiple disposable bags. Each run for a manufacturing campaign would then come from a thaw of one or more of these cryopreserved bags. This article reviews the development and optimization of individual steps of the FASTEC bioprocess scheme: scaling up cells to greater than 70 × 10(6) cells/mL and freezing in bags with an optimized controlled rate freezing protocol and using a customized rack configuration. Flow cytometry analysis was also employed to understand the recovery of CHO cells following cryopreservation. Extensive development data were gathered to ensure that the quantity and quality of the drug manufactured using the FASTEC bioprocess scheme was acceptable compared to the conventional seed train process flow. The result of offering comparable manufacturing options offers flexibility to the cell culture manufacturing network. Copyright © 2012 Wiley Periodicals, Inc.

  12. Stimuli of Collaboration in Product Development: A Case Study in a Project Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Jääskeläinen Aki

    2017-12-01

    Full Text Available There is already a wide acceptance on the importance of involving supplier and customer companies in product development. Decent understanding prevails on the relationship-oriented approach to product development including various collaboration forms. However, there is less research on the factors explaining the decision of attending to joint product development. In addition, less studies have examined the integrated role of both suppliers and customers in product development initiatives. This study searches answers to the following research questions: 1. What is the role of different actors in product development initiatives? 2. What factors motivate suppliers and customers to participate in product development? The research is carried out as an in-depth qualitative single case study in a large project manufacturing company. It takes the perspective of a focal company striving for product improvements. The first part of the empirical study consists of 15 semi-structured interviews. The second part includes two discursive workshops and builds upon the results of the interviews. This study contributes to the existing research by explaining the challenges and conditions facilitating joint product development with supplier and purchaser companies. The results highlight the role of customers in improving the effectiveness of product development. As a practical contribution, the paper reports the application of workshop method as a facilitator of collaboration between supplier, purchaser (focal company and customer companies.

  13. Development, manufacturing and testing of a gas-loaded variable conductance methanol heat pipe

    Science.gov (United States)

    Vanbuggenum, R. I. J.; Daniels, D. H. W.

    1987-02-01

    The experimental technology required to measure the performance of moderate temperature heat pipes is presented. The heat pipe manufacturing process is described. The hydrodynamic characteristics of the porous structure inside the heat pipe envelope were examined using a specially developed test rig, based upon a steady-state evaporation test. A fully automated test facility was developed and validated by testing constant conductance and variable conductance heat pipes (VCHP). Theoretical performance predictions are illustrated in terms of pressure, depicted in 3D-plots, and compared with the test results of the heat pipe performance tests. The design of the VCHP was directed towards the verification of the VCHP mathematical model. The VCHP design is validated and ready for the final testing and model verification.

  14. Supercritical fluid chromatography for GMP analysis in support of pharmaceutical development and manufacturing activities.

    Science.gov (United States)

    Hicks, Michael B; Regalado, Erik L; Tan, Feng; Gong, Xiaoyi; Welch, Christopher J

    2016-01-05

    Supercritical fluid chromatography (SFC) has long been a preferred method for enantiopurity analysis in support of pharmaceutical discovery and development, but implementation of the technique in regulated GMP laboratories has been somewhat slow, owing to limitations in instrument sensitivity, reproducibility, accuracy and robustness. In recent years, commercialization of next generation analytical SFC instrumentation has addressed previous shortcomings, making the technique better suited for GMP analysis. In this study we investigate the use of modern SFC for enantiopurity analysis of several pharmaceutical intermediates and compare the results with the conventional HPLC approaches historically used for analysis in a GMP setting. The findings clearly illustrate that modern SFC now exhibits improved precision, reproducibility, accuracy and robustness; also providing superior resolution and peak capacity compared to HPLC. Based on these findings, the use of modern chiral SFC is recommended for GMP studies of stereochemistry in pharmaceutical development and manufacturing. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. The Development Of A Theoretical Lean Culture Causal Framework To Support The Effective Implementation Of Lean In Automotive Component Manufacturers

    Directory of Open Access Journals (Sweden)

    Van der Merwe, Karl Robert

    2014-05-01

    Full Text Available Although it is generally accepted that lean manufacturing improves operational performance, many organisations are struggling to adapt to the lean philosophy. The purpose of this study is to contribute to a more effective strategy for implementing the lean manufacturing improvement philosophy. The study sets out both to integrate well-researched findings and theories related to generic organisational culture with more recent research and experience related to lean culture, and to examine the role that culture plays in the effective implementation of lean manufacturing principles and techniques. The ultimate aim of this exercise is to develop a theoretical lean culture causal framework.

  16. Developing an Innovative and Creative Hands-on Lean Six Sigma Manufacturing Experiments for Engineering Education

    Directory of Open Access Journals (Sweden)

    I. Badawi

    2016-12-01

    Full Text Available The goal of this study was to develop an innovative and creative hands-on project based on Lean Six Sigma experiments for engineering education at the College of Engineering at the University of Hail. The exercises were designed using junction box assembly to meet the following learning outcomes: 1-to provide students with solid experience on waste elimination and variation reduction and 2-to engage students in exercises related to assembly line mass production and motion study. To achieve these objectives, students were introduced to the principles of Lean manufacturing and Six Sigma through various pedagogical activities such as classroom instruction, laboratory experiments, hands-on exercises, and interactive group work. In addition, Minitab 17 statistical package and Quality Companion 3 software were used to facilitate The Lean Six Sigma exercises. The software application and hands-on manufacturing assembly were found to be extremely valuable in giving students the chance to identify which variables to control in order to minimize variation and eliminate waste. This research was funded by a grant from the Deanship of Academic Research at University of Hail for project number E-26-IC, and under the umbrella of Ministry of Education within the framework of the National Initiative on Creativity and Innovation in Saudi Universities at University of Hail.

  17. Development of an Adaptive Forecasting System: A Case Study of a PC Manufacturer in South Korea

    Directory of Open Access Journals (Sweden)

    Chihyun Jung

    2016-03-01

    Full Text Available We present a case study of the development of an adaptive forecasting system for a leading personal computer (PC manufacturer in South Korea. It is widely accepted that demand forecasting for products with short product life cycles (PLCs is difficult, and the PLC of a PC is generally very short. The firm has various types of products, and the volatile demand patterns differ by product. Moreover, we found that different departments have different requirements when it comes to the accuracy, point-of-time and range of the forecasts. We divide the demand forecasting process into three stages depending on the requirements and purposes. The systematic forecasting process is then introduced to improve the accuracy of demand forecasting and to meet the department-specific requirements. Moreover, a newly devised short-term forecasting method is presented, which utilizes the long-term forecasting results of the preceding stages. We evaluate our systematic forecasting methods based on actual sales data from the PC manufacturer, where our forecasting methods have been implemented.

  18. Recent developments in turbomachinery component materials and manufacturing challenges for aero engine applications

    Science.gov (United States)

    Srinivas, G.; Raghunandana, K.; Satish Shenoy, B.

    2018-02-01

    In the recent years the development of turbomachinery materials performance enhancement plays a vital role especially in aircraft air breathing engines like turbojet engine, turboprop engine, turboshaft engine and turbofan engines. Especially the transonic flow engines required highly sophisticated materials where it can sustain the entire thrust which can create by the engine. The main objective of this paper is to give an overview of the present cost-effective and technological capabilities process for turbomachinery component materials. Especially the main focus is given to study the Electro physical, Photonic additive removal process and Electro chemical process for turbomachinery parts manufacture. The aeronautical propulsion based technologies are reviewed thoroughly where in surface reliability, geometrical precession, and material removal and highly strengthened composite material deposition rates usually difficult to cut dedicated steels, Titanium and Nickel based alloys. In this paper the past aeronautical and propulsion mechanical based manufacturing technologies, current sophisticated technologies and also future challenging material processing techniques are covered. The paper also focuses on the brief description of turbomachinery components of shaping process and coating in aeromechanical applications.

  19. The development of tool manufacture in humans: what helps young children make innovative tools?

    Science.gov (United States)

    Chappell, Jackie; Cutting, Nicola; Apperly, Ian A; Beck, Sarah R

    2013-11-19

    We know that even young children are proficient tool users, but until recently, little was known about how they make tools. Here, we will explore the concepts underlying tool making, and the kinds of information and putative cognitive abilities required for children to manufacture novel tools. We will review the evidence for novel tool manufacture from the comparative literature and present a growing body of data from children suggesting that innovation of the solution to a problem by making a tool is a much more challenging task than previously thought. Children's difficulty with these kinds of tasks does not seem to be explained by perseveration with unmodified tools, difficulty with switching to alternative strategies, task pragmatics or issues with permission. Rather, making novel tools (without having seen an example of the required tool within the context of the task) appears to be hard, because it is an example of an 'ill-structured problem'. In this type of ill-structured problem, the starting conditions and end goal are known, but the transformations and/or actions required to get from one to the other are not specified. We will discuss the implications of these findings for understanding the development of problem-solving in humans and other animals.

  20. The development of tool manufacture in humans: what helps young children make innovative tools?

    Science.gov (United States)

    Chappell, Jackie; Cutting, Nicola; Apperly, Ian A.; Beck, Sarah R.

    2013-01-01

    We know that even young children are proficient tool users, but until recently, little was known about how they make tools. Here, we will explore the concepts underlying tool making, and the kinds of information and putative cognitive abilities required for children to manufacture novel tools. We will review the evidence for novel tool manufacture from the comparative literature and present a growing body of data from children suggesting that innovation of the solution to a problem by making a tool is a much more challenging task than previously thought. Children's difficulty with these kinds of tasks does not seem to be explained by perseveration with unmodified tools, difficulty with switching to alternative strategies, task pragmatics or issues with permission. Rather, making novel tools (without having seen an example of the required tool within the context of the task) appears to be hard, because it is an example of an ‘ill-structured problem’. In this type of ill-structured problem, the starting conditions and end goal are known, but the transformations and/or actions required to get from one to the other are not specified. We will discuss the implications of these findings for understanding the development of problem-solving in humans and other animals. PMID:24101620

  1. Tohoku Town developing with new energy. New energy vision of the Tohoku town area; 2001 nendo Tohoku machi chiiki shin energy vision. Shin energy de hiraku Tohoku machi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Tohoku Town, Aomori Prefecture, an investigational study was conducted of the potential utilization of new energy, etc., and a vision was worked out. The population of Tohoku Town was 10,662 according to the results of the national census taken in 2000, which is slightly decreasing. The energy consumption amount of Tohoku Town was estimated at 280,977 Gcal/y, and the consumption of fossil fuel in the commercial/residential sector stands out. This is because a lot of kerosene is consumed in the area where it is cold. As measures to be taken for the new energy vision, the following were cited: initiative introduction of new energy to public facilities/preparation of a system toward the promotion of introduction, supply of thermal energy to townspeople/creation of the living environment using new energy, new energy use to activities of agricultural production/energy use of stockbreeding resource/energy use of forestry resource/potential study of the wind power generation, spread/education for townspeople/proprietors, preparation of places of bodily sensation/exchanges of new energy, training/support of activities of townspeople themselves, etc. (NEDO)

  2. [Chinese medicine industry 4.0:advancing digital pharmaceutical manufacture toward intelligent pharmaceutical manufacture].

    Science.gov (United States)

    Cheng, Yi-Yu; Qu, Hai-Bin; Zhang, Bo-Li

    2016-01-01

    A perspective analysis on the technological innovation in pharmaceutical engineering of Chinese medicine unveils a vision on "Future Factory" of Chinese medicine industry in mind. The strategy as well as the technical roadmap of "Chinese medicine industry 4.0" is proposed, with the projection of related core technology system. It is clarified that the technical development path of Chinese medicine industry from digital manufacture to intelligent manufacture. On the basis of precisely defining technical terms such as process control, on-line detection and process quality monitoring for Chinese medicine manufacture, the technical concepts and characteristics of intelligent pharmaceutical manufacture as well as digital pharmaceutical manufacture are elaborated. Promoting wide applications of digital manufacturing technology of Chinese medicine is strongly recommended. Through completely informationized manufacturing processes and multi-discipline cluster innovation, intelligent manufacturing technology of Chinese medicine should be developed, which would provide a new driving force for Chinese medicine industry in technology upgrade, product quality enhancement and efficiency improvement. Copyright© by the Chinese Pharmaceutical Association.

  3. Vision development over an extended follow-up period in babies after successful vitrectomy for stage 4b retinopathy of prematurity.

    Science.gov (United States)

    Gadkari, Salil; Kamdar, Rushita; Kulkarni, Sucheta; Deshpande, Madan; Taras, Sudhir

    2015-05-01

    To demonstrate improvement in the vision of babies after successful vitrectomy for stage 4b retinopathy of prematurity (ROP) over an extended period of time. This was an observational prospective case series. Eight babies who had undergone successful vitrectomy in either their only seeing eye (or both eyes) with stage 4b ROP were followed up post-operatively for a period of 80 weeks or more. Vision with Teller acuity chart, refraction, binocular indirect ophthalmoscopy, and documentation with RetCam was done at each visit. Vision of the (only/better) seeing operated eye with corrective glasses was graded for the purpose of statistical evaluation. Paired t test was performed to compare the vision prior to 30 weeks and at or after 80 weeks. Statistically significant improvement in vision was noted at or after 80 weeks as compared to the vision recorded before 30 weeks (p = 0.0062). Unlike in adult intraocular surgeries where stable visual acuity is reached well before 30 weeks, continuing improvement at 80 weeks and beyond is noted. Gradual restoration of the retinal architecture and plasticity of the infant's developing brain are thought to be responsible.

  4. Visions of development and environmental values in the municipal councils of Itajaí Middle Valley, Santa Catarina State

    Directory of Open Access Journals (Sweden)

    Cleci Teresinha Noara

    2009-12-01

    Full Text Available This paper began in November 2006, it deals with environmental values the councils of environment of Blumenau and Indaial on the middle Vale of Itajaí, Santa Catarina State. The objective was to identify and to analyze the environment values and interests that permeate the practice of these councils. The subject becomes relevant because the theorical sources are scarces, data-collecting interviews, comments bibliographical and documentary. The results demonstrate even though the council members possess and anthropocentric vision about environment, they believe that, with a environment management integrated and participative action, close to sustainable development, it will be possible the solution of these environment problems. The study aims to be a contribution to municipal councils of environment in Itajaí basin, since it allows us to understand some of the capacities and limitations of them in the formulation and implementation of public policies for sustainable development in the region.

  5. Recent developments in computer vision-based analytical chemistry: A tutorial review.

    Science.gov (United States)

    Capitán-Vallvey, Luis Fermín; López-Ruiz, Nuria; Martínez-Olmos, Antonio; Erenas, Miguel M; Palma, Alberto J

    2015-10-29

    Chemical analysis based on colour changes recorded with imaging devices is gaining increasing interest. This is due to its several significant advantages, such as simplicity of use, and the fact that it is easily combinable with portable and widely distributed imaging devices, resulting in friendly analytical procedures in many areas that demand out-of-lab applications for in situ and real-time monitoring. This tutorial review covers computer vision-based analytical (CVAC) procedures and systems from 2005 to 2015, a period of time when 87.5% of the papers on this topic were published. The background regarding colour spaces and recent analytical system architectures of interest in analytical chemistry is presented in the form of a tutorial. Moreover, issues regarding images, such as the influence of illuminants, and the most relevant techniques for processing and analysing digital images are addressed. Some of the most relevant applications are then detailed, highlighting their main characteristics. Finally, our opinion about future perspectives is discussed. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. DEVELOPING CREATIVE THINKING SKILLS AND CREATIVE ATTITUDE THROUGH PROBLEM BASED GREEN VISION CHEMISTRY ENVIRONMENT LEARNING

    Directory of Open Access Journals (Sweden)

    M. Nuswowati

    2015-11-01

    Full Text Available The purpose of this research is to build creative thinking skills and creative attitude of students through a model of problem-based lectures Environmental Chemistry (PBL Green Chemistry visionary. Mixed methods research design experimental models embedded with pretest-posttest control group were used in this study, and the differences between assumed initial end-tests as the effects of the treatment. Creative thinking skills measured by the essay tests, non test while the creative attitude is measured from the completed questionnaires consisting of positive and negative statements of markers creative attitude. Data measurement N-gain of creative thinking skills for the control and experimental group were 0.40 and 0.71, while the creative attitude were 0.08 and 0.34. Improved tests of creative thinking skills or creative attitudes were analyzed by t-test. Implementation of research findings indicate environmental chemistry lecture- problems based Green Chemistry vision can improve thinking skills and of creative student.

  7. Horizon 2000: Vision of the development of a custom-oriented electric power market in a European perspective

    International Nuclear Information System (INIS)

    Anon.

    1993-10-01

    After a perspective on the development in the seventies and eighties in chapter one, it is stated that, given the developments in the field of liberalization and the manifest internationalization of the European electricity market (chapter two), the Dutch electricity sector is not yet ready for an open European market (chapter three). A revision of the present electricity model does not seem to be the right method, because of the built-in contradictions and the reactive manner in which new developments can be handled (chapter four). Therefore, at this crossroad a new starting point has to be chosen in order for the Dutch electricity sector to be able to handle the developments in a pro-active way. At the same time this offers a solution to the instability, which threatens to the Dutch electricity market as a result of the fast growth of cogeneration capacity. In the new vision Horizon 2000 (outlined in chapters 5-9) the focus is shifted from central planning and cost pooling to customer-orientation within an open market. The market parties get, on the basis of autonomous responsibilities, multiple buying and selling options. A stepwise implementation of Horizon is explained in chapter 10, while the consequences of the market model Horizon 2000 are indicated as positive in chapter eleven. It must be stressed that this report is meant to be a working paper, open for discussion. Both the vision on the market and its consequences for the organization model have to be elaborated in more detail. 30 figs., 27 tabs.,

  8. Development of the elementary technology and the stack manufacturing process of solid oxide fuel cell (II)

    Energy Technology Data Exchange (ETDEWEB)

    Hong, S.A.; Seo, I.Y.; Lee, S.H. [Ssangyong Research Center (Korea, Republic of)] [and others

    1996-02-01

    Most of the SOFC components are composed of ceramics. Energy efficiency of SOFC can be obtained up to 80% with co-generation system and is higher than the traditional electricity generation system (30%). SOFC has having highest efficient among the several fuel cell system and is called {sup T}he 3 rd Generation Fuel Cell`. So the every developed countries are competing to develop this high technology. Key points to develop SOFCs are to select a materials having the similar thermal expansion behaviors and to construct a stable design. At present, three common stack configurations have been proposed and fabricated for SOFCs : sealess tubular design, flat-plat design, monolithic design. Although having disadvantages in the stability of performance and structure, the flat-plate design is commonly adopted rather than tubular design in recent SOFC R and D because of economical merit of commercial scale fabrication. In this study flat-plat design is adopted to develop SOFC in this study. The purpose of this study, the 2 nd year of Phase I, was to apply and progress the fabrication technology of 5 x 5 cm{sup 2} sized unit cell that was developed in 1 st year and to develop elementary technologies of stack manufacturing, i. e., design and fabrication of separator, sealing materials and gas sealing technology. (author) 66 refs., 48 tabs., 195 figs.

  9. Detecting Attacks in CyberManufacturing Systems: Additive Manufacturing Example

    Directory of Open Access Journals (Sweden)

    Wu Mingtao

    2017-01-01

    Full Text Available CyberManufacturing System is a vision for future manufacturing where physical components are fully integrated with computational processes in a connected environment. However, realizing the vision requires that its security be adequately ensured. This paper presents a vision-based system to detect intentional attacks on additive manufacturing processes, utilizing machine learning techniques. Particularly, additive manufacturing systems have unique vulnerabilities to malicious attacks, which can result in defective infills but without affecting the exterior. In order to detect such infill defects, the research uses simulated 3D printing process images as well as actual 3D printing process images to compare accuracies of machine learning algorithms in classifying, clustering and detecting anomalies on different types of infills. Three algorithms - (i random forest, (ii k nearest neighbor, and (iii anomaly detection - have been adopted in the research and shown to be effective in detecting such defects.

  10. Development of the functional vision questionnaire for children and young people with visual impairment: the FVQ_CYP.

    Science.gov (United States)

    Tadić, Valerija; Cooper, Andrew; Cumberland, Phillippa; Lewando-Hundt, Gillian; Rahi, Jugnoo S

    2013-12-01

    To develop a novel age-appropriate measure of functional vision (FV) for self-reporting by visually impaired (VI) children and young people. Questionnaire development. A representative patient sample of VI children and young people aged 10 to 15 years, visual acuity of the logarithm of the minimum angle of resolution (logMAR) worse than 0.48, and a school-based (nonrandom) expert group sample of VI students aged 12 to 17 years. A total of 32 qualitative semistructured interviews supplemented by narrative feedback from 15 eligible VI children and young people were used to generate draft instrument items. Seventeen VI students were consulted individually on item relevance and comprehensibility, instrument instructions, format, and administration methods. The resulting draft instrument was piloted with 101 VI children and young people comprising a nationally representative sample, drawn from 21 hospitals in the United Kingdom. Initial item reduction was informed by presence of missing data and individual item response pattern. Exploratory factor analysis (FA) and parallel analysis (PA), and Rasch analysis (RA) were applied to test the instrument's psychometric properties. Psychometric indices and validity assessment of the Functional Vision Questionnaire for Children and Young People (FVQ_CYP). A total of 712 qualitative statements became a 56-item draft scale, capturing the level of difficulty in performing vision-dependent activities. After piloting, items were removed iteratively as follows: 11 for high percentage of missing data, 4 for skewness, and 1 for inadequate item infit and outfit values in RA, 3 having shown differential item functioning across age groups and 1 across gender in RA. The remaining 36 items showed item fit values within acceptable limits, good measurement precision and targeting, and ordered response categories. The reduced scale has a clear unidimensional structure, with all items having a high factor loading on the single factor in FA and

  11. Air Pollution and 'Dirty' Industries. How and Why Does the Composition of Manufacturing Output Change with Economic Development?

    International Nuclear Information System (INIS)

    Cole, M.A.

    2000-01-01

    This paper examines the impact on air pollution of changes in the composition of manufacturing output in developed and developing countries. Pollution emissions from manufacturing output are estimated in a manner which holds constant the effect of technology and regulations allowing the impact of compositional changes alone on pollution to be estimated. The paper has three main findings; (1) the inverted-U estimated between per capita income and the pollution intensity of GDP arises due to both the composition of manufacturing becoming cleaner and the share of manufacturing output in GDP falling. Compositional changes alone are not responsible for the inverted-U between per capita income and per capita emissions; (2) changes to the composition of manufacturing output are consistent with the pollution haven hypothesis, however there is clear evidence that rising per capita incomes are associated with a failing income elasticity of demand for 'dirty' products. This fact may explain the compositional changes that occur with development; (3) in addition to the income elasticity effect, the analysis suggests that land prices and to a lesser extent the prices of labour and capital, determine the proportion of dirty industry within a country's manufacturing sector. 27 refs

  12. Development of advanced manufacturing technologies for low cost hydrogen storage vessels

    Energy Technology Data Exchange (ETDEWEB)

    Leavitt, Mark [Quantum Fuel Systems Technologies Worldwide, Inc., Irvine, CA (United States); Lam, Patrick [Boeing Research and Technology (BR& T), Seattle, WA (United States)

    2014-12-29

    The U.S. Department of Energy (DOE) defined a need for low-cost gaseous hydrogen storage vessels at 700 bar to support cost goals aimed at 500,000 units per year. Existing filament winding processes produce a pressure vessel that is structurally inefficient, requiring more carbon fiber for manufacturing reasons, than would otherwise be necessary. Carbon fiber is the greatest cost driver in building a hydrogen pressure vessel. The objective of this project is to develop new methods for manufacturing Type IV pressure vessels for hydrogen storage with the purpose of lowering the overall product cost through an innovative hybrid process of optimizing composite usage by combining traditional filament winding (FW) and advanced fiber placement (AFP) techniques. A numbers of vessels were manufactured in this project. The latest vessel design passed all the critical tests on the hybrid design per European Commission (EC) 79-2009 standard except the extreme temperature cycle test. The tests passed include burst test, cycle test, accelerated stress rupture test and drop test. It was discovered the location where AFP and FW overlap for load transfer could be weakened during hydraulic cycling at 85°C. To design a vessel that passed these tests, the in-house modeling software was updated to add capability to start and stop fiber layers to simulate the AFP process. The original in-house software was developed for filament winding only. Alternative fiber was also investigated in this project, but the added mass impacted the vessel cost negatively due to the lower performance from the alternative fiber. Overall the project was a success to show the hybrid design is a viable solution to reduce fiber usage, thus driving down the cost of fuel storage vessels. Based on DOE’s baseline vessel size of 147.3L and 91kg, the 129L vessel (scaled to DOE baseline) in this project shows a 32% composite savings and 20% cost savings when comparing Vessel 15 hybrid design and the Quantum

  13. Development of Advanced Manufacturing Methods for Warm White LEDs for General Lighting

    Energy Technology Data Exchange (ETDEWEB)

    Deshpande, Anirudha; Kolodin, Boris; Jacob, Cherian; Chowdhury, Ashfaqul; Kuenzler, Glenn; Sater, Karen; Aesram, Danny; Glaettli, Steven; Gallagher, Brian; Langer, Paul; Setlur, Anant; Beers, Bill

    2012-03-31

    GE Lighting Solutions will develop precise and efficient manufacturing techniques for the “remote phosphor” platform of warm-white LED products. In volume, this will be demonstrated to drive significant materials, labor and capital productivity to achieve a maximum possible 53% reduction in overall cost. In addition, the typical total color variation for these white LEDs in production will be well within the ANSI bins and as low as a 4-step MacAdam ellipse centered on the black body curve. Achievement of both of these objectives will be demonstrated while meeting a performance target of > 75 lm/W for a warm-white LED and a reliability target of <30% lumen drop / <2-step MacAdam ellipse shift, estimated over 50,000 hrs.

  14. [Development of computer aided forming techniques in manufacturing scaffolds for bone tissue engineering].

    Science.gov (United States)

    Wei, Xuelei; Dong, Fuhui

    2011-12-01

    To review recent advance in the research and application of computer aided forming techniques for constructing bone tissue engineering scaffolds. The literature concerning computer aided forming techniques for constructing bone tissue engineering scaffolds in recent years was reviewed extensively and summarized. Several studies over last decade have focused on computer aided forming techniques for bone scaffold construction using various scaffold materials, which is based on computer aided design (CAD) and bone scaffold rapid prototyping (RP). CAD include medical CAD, STL, and reverse design. Reverse design can fully simulate normal bone tissue and could be very useful for the CAD. RP techniques include fused deposition modeling, three dimensional printing, selected laser sintering, three dimensional bioplotting, and low-temperature deposition manufacturing. These techniques provide a new way to construct bone tissue engineering scaffolds with complex internal structures. With rapid development of molding and forming techniques, computer aided forming techniques are expected to provide ideal bone tissue engineering scaffolds.

  15. Development of Spray on Bag for manufacturing of large composites parts: Diffusivity analysis

    Science.gov (United States)

    Dempah, Maxime Joseph

    Bagging materials are utilized in many composites manufacturing processes. The selection is mainly driven by cost, temperature requirements, chemical compatibility and tear properties of the bag. The air barrier properties of the bag are assumed to be adequate or in many cases are not considered at all. However, the gas barrier property of a bag is the most critical parameter, as it can negatively affect the quality of the final laminate. The barrier property is a function of the bag material, uniformity, thickness and temperature. Improved barrier properties are needed for large parts, high pressure consolidated components and structures where air stays entrapped on the part surface. The air resistance property of the film is defined as permeability and is investigated in this thesis. A model was developed to evaluate the gas transport through the film and an experimental cell was implemented to characterize various commercial films. Understanding and characterizing the transport phenomena through the film allows optimization of the bagging material for various manufacturing processes. Spray-on-Bag is a scalable alternative bagging method compared to standard films. The approach allows in-situ fabrication of the bag on large and complex geometry structures where optimization of the bag properties can be varied on a local level. An experimental setup was developed and implemented using a six axis robot and an automated spraying system. Experiments were performed on a flat surface and specimens were characterized and compared to conventional films. Air barrier properties were within range of standard film approaches showing the potential to fabricate net shape bagging structures in an automated process.

  16. Development of technology and properties investigation of steel/bronze joints proposed for ITER HHF components manufacturing

    International Nuclear Information System (INIS)

    Kalinin, G.; Krestnikov, N.S.; Strebkov, Y.S.; Abramov, V.Y.; Gervash, A.; Mazul, I.; Zolotarev, V.B.; Fabritsiev, S.A.

    2007-01-01

    Full text of publication follows: During the development of ITER HHF components manufacturing it is necessary to provide reliable joints between heat sink material made of CuCrZr bronze and the supporting construction made of austenitic steel. Four different methods have been tried out: - Hot Isostatic Pressing (HIP), - HIP assisted brazing, - furnace assisted brazing, - Casting. The investigation of structure and properties of joints show that HIP and casting provide the better results than the other technologies. However, HIP is relatively expensive technology, and big size HIP furnace is required for the full scale components manufacturing that are not available n RF now. Therefore, casting was selected as a reference manufacturing technology for the primary wall of ITER modules n RF. The paper summarizes the results of bronze/steel joints manufacturing and investigation of their properties. (authors)

  17. Multiple High-Fidelity Modeling Tools for Metal Additive Manufacturing Process Development, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Despite the rapid commercialization of additive manufacturing technology such as selective laser melting, SLM, there are gaps in process modeling and material...

  18. Multiple High-Fidelity Modeling Tools for Metal Additive Manufacturing Process Development, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Despite the rapid commercialization of additive manufacturing technology such as selective laser melting, SLM, there are gaps in process modeling and material...

  19. Biofeedback for Better Vision

    Science.gov (United States)

    1990-01-01

    Biofeedtrac, Inc.'s Accommotrac Vision Trainer, invented by Dr. Joseph Trachtman, is based on vision research performed by Ames Research Center and a special optometer developed for the Ames program by Stanford Research Institute. In the United States, about 150 million people are myopes (nearsighted), who tend to overfocus when they look at distant objects causing blurry distant vision, or hyperopes (farsighted), whose vision blurs when they look at close objects because they tend to underfocus. The Accommotrac system is an optical/electronic system used by a doctor as an aid in teaching a patient how to contract and relax the ciliary body, the focusing muscle. The key is biofeedback, wherein the patient learns to control a bodily process or function he is not normally aware of. Trachtman claims a 90 percent success rate for correcting, improving or stopping focusing problems. The Vision Trainer has also proved effective in treating other eye problems such as eye oscillation, cross eyes, and lazy eye and in professional sports to improve athletes' peripheral vision and reaction time.

  20. Design for Manufacture and Assembly for Product Development (Case study : Emergency Lamp)

    Science.gov (United States)

    Ngatilah, Y.; Pulansari, F.; Ernawati, Dira; Pujiastuti, C.; Parwati, C. I.; Prasetyo, B.

    2018-01-01

    Community needs that are not primary but important in everyday life are lights for lighting. State electricity company (PLN) is experiencing limitations in supplying electricity for this puIDRose. Therefore emergency lights (emergency lights) are already marketed in the community, which limited function only illuminate a very limited space. Therefore we developed the design of energy saving lamps using “Light Emitting Diode” (LED) which can illuminate the whole house as well as functioning as mobile phone charger (HP). The method used is Design for Manufacture and Assembly (DFMA), with the result of design development The percentage increase in assembly efficiency (E) is 0.01071 - 0.00645 = 0.00426 or = 39.76%. The decrease in material costs is IDR 234,000 - IDR 214,000 = IDR 20,000 or = 8.54% .Development design is received because of more assembly efficiency than the initial design. Power usage on previous products with series and designs of the original product can last only 4-5 hours non-stop, while the development of the design can survive 9-10 hours 2x more energy efficient.

  1. Development of a Configurable Growth Chamber with a Computer Vision System to Study Circadian Rhythm in Plants

    Directory of Open Access Journals (Sweden)

    Marcos Egea-Cortines

    2012-11-01

    Full Text Available Plant development is the result of an endogenous morphogenetic program that integrates environmental signals. The so-called circadian clock is a set of genes that integrates environmental inputs into an internal pacing system that gates growth and other outputs. Study of circadian growth responses requires high sampling rates to detect changes in growth and avoid aliasing. We have developed a flexible configurable growth chamber comprising a computer vision system that allows sampling rates ranging between one image per 30 s to hours/days. The vision system has a controlled illumination system, which allows the user to set up different configurations. The illumination system used emits a combination of wavelengths ensuring the optimal growth of species under analysis. In order to obtain high contrast of captured images, the capture system is composed of two CCD cameras, for day and night periods. Depending on the sample type, a flexible image processing software calculates different parameters based on geometric calculations. As a proof of concept we tested the system in three different plant tissues, growth of petunia- and snapdragon (Antirrhinum majus flowers and of cladodes from the cactus Opuntia ficus-indica. We found that petunia flowers grow at a steady pace and display a strong growth increase in the early morning, whereas Opuntia cladode growth turned out not to follow a circadian growth pattern under the growth conditions imposed. Furthermore we were able to identify a decoupling of increase in area and length indicating that two independent growth processes are responsible for the final size and shape of the cladode.

  2. Barriers to accessing low vision services.

    Science.gov (United States)

    Pollard, Tamara L; Simpson, John A; Lamoureux, Ecosse L; Keeffe, Jill E

    2003-07-01

    To investigate barriers to accessing low vision services in Australia. Adults with a vision impairment (vision difficulties, duration of vision loss and satisfaction with vision and also examined issues of awareness of low vision services and referral to services. Focus groups were also conducted with vision impaired (Vision Australia Foundation. The discussions were recorded and transcribed. The questionnaire revealed that referral to low vision services was associated with a greater degree of vision loss (p = 0.002) and a greater self-perception of low vision (p = 0.005) but that referral was not associated with satisfaction (p = 0.144) or difficulties related to vision (p = 0.169). Participants with mild and moderate vision impairment each reported similar levels of difficulties with daily activities and satisfaction with their vision (p > 0.05). However, there was a significant difference in the level of difficulties experienced with daily activities between those with mild-moderate and severe vision impairment (p low vision services related to awareness of services among the general public and eye care professionals, understanding of low vision and the services available, acceptance of low vision, the referral process, and transport. In addition to the expected difficulties with lack of awareness of services by people with low vision, many people do not understand what the services provide and do not identify themselves as having low vision. Knowledge of these barriers, from the perspective of people with low vision, can now be used to guide the development and content of future health-promotion campaigns.

  3. Developability studies before initiation of process development: improving manufacturability of monoclonal antibodies.

    Science.gov (United States)

    Yang, Xiaoyu; Xu, Wei; Dukleska, Svetlana; Benchaar, Sabrina; Mengisen, Selina; Antochshuk, Valentyn; Cheung, Jason; Mann, Leslie; Babadjanova, Zulfia; Rowand, Jason; Gunawan, Rico; McCampbell, Alexander; Beaumont, Maribel; Meininger, David; Richardson, Daisy; Ambrogelly, Alexandre

    2013-01-01

    Monoclonal antibodies constitute a robust class of therapeutic proteins. Their stability, resistance to stress conditions and high solubility have allowed the successful development and commercialization of over 40 antibody-based drugs. Although mAbs enjoy a relatively high probability of success compared with other therapeutic proteins, examples of projects that are suspended due to the instability of the molecule are not uncommon. Developability assessment studies have therefore been devised to identify early during process development problems associated with stability, solubility that is insufficient to meet expected dosing or sensitivity to stress. This set of experiments includes short-term stability studies at 2-8 þC, 25 þC and 40 þC, freeze-thaw studies, limited forced degradation studies and determination of the viscosity of high concentration samples. We present here three case studies reflecting three typical outcomes: (1) no major or unexpected degradation is found and the study results are used to inform early identification of degradation pathways and potential critical quality attributes within the Quality by Design framework defined by US Food and Drug Administration guidance documents; (2) identification of specific degradation pathway(s) that do not affect potency of the molecule, with subsequent definition of proper process control and formulation strategies; and (3) identification of degradation that affects potency, resulting in program termination and reallocation of resources.

  4. Manufacturing network evolution

    DEFF Research Database (Denmark)

    Yang, Cheng; Farooq, Sami; Johansen, John

    2011-01-01

    Purpose – This paper examines the effect of changes at the manufacturing plant level on other plants in the manufacturing network and also investigates the role of manufacturing plants on the evolution of a manufacturing network. Design/methodology/approach –The research questions are developed...... different manufacturing plants in the network and their impact on network transformation. Findings – The paper highlights the dominant role of manufacturing plants in the continuously changing shape of a manufacturing network. The paper demonstrates that a product or process change at one manufacturing...... by identifying the gaps in the reviewed literature. The paper is based on three case studies undertaken in Danish manufacturing companies to explore in detail their manufacturing plants and networks. The cases provide a sound basis for developing the research questions and explaining the interaction between...

  5. Lean Manufacturing Implementation for Multinational Companies with Production Subsidiary in Brazil: Development of A Roadmap

    Directory of Open Access Journals (Sweden)

    L. Goehnera,

    2016-06-01

    Full Text Available Foreign multinational companies with a production subsidiary in Brazil are in general recognized as high-level productive companies; however, their productivity potential is mostly not fully achieved. Lean Manufacturing (LM has been proved as a valuable aid to achieve competitiveness in the long run. Regarding the rising importance of successfully implementing LM at multinationals in Brazil and an apparent lack of discussion regarding LM in Brazil this paper aims to propose a comprehensive implementation roadmap, which enables a multinational on a basis of a systematic approach, to achieve an advanced sustainable LM system in a practical manner. The insights of literature and case studies are combined to develop the roadmap. The roadmap was developed so that both companies, those, which have not started yet their journey towards LM, as well as those that have taken already the first steps can use the roadmap. However, the roadmap was built on a broad empirical basis. It should be noticed that it is impossible to consider all factors influencing the LMI at multinationals operating in Brazil in a real world setting. As a result, the roadmap should not be regarded as a ready implementation plan, which has to be strictly followed. Instead, it should be seen as a guideline, which helps a multinational to develop its own, detailed and fitted plan for successfully implementing LM and establishing a learning organization.

  6. Agrarian Visions.

    Science.gov (United States)

    Theobald, Paul

    A new feature in "Country Teacher,""Agrarian Visions" reminds rural teachers that they can do something about rural decline. Like to populism of the 1890s, the "new populism" advocates rural living. Current attempts to address rural decline are contrary to agrarianism because: (1) telecommunications experts seek to…

  7. Fractured Visions

    DEFF Research Database (Denmark)

    Bonde, Inger Ellekilde

    2016-01-01

    In the post-war period a heterogeneous group of photographers articulate a new photographic approach to the city as motive in a photographic language that combines intense formalism with subjective vision. This paper analyses the photobook Fragments of a City published in 1960 by Danish photograp...

  8. Embodied Visions

    DEFF Research Database (Denmark)

    Grodal, Torben Kragh

    Embodied Visions presents a groundbreaking analysis of film through the lens of bioculturalism, revealing how human biology as well as human culture determine how films are made and experienced. Throughout the book the author uses the breakthroughs of modern brain science to explain general featu...

  9. Vision Screening

    Science.gov (United States)

    ... an efficient and cost-effective method to identify children with visual impairment or eye conditions that are likely to lead ... main goal of vision screening is to identify children who have or are at ... visual impairment unless treated in early childhood. Other problems that ...

  10. Nuclear fuel in water reactors: Manufacturing technology, operational experience and development objectives in the Federal Republic of Germany

    International Nuclear Information System (INIS)

    Holzer, R.; Knoedler, D.

    1977-01-01

    The nuclear fuel industry in the Federal Republic of Germany comprises the full range of manufacturing capabilities for pressurized-, boiling- and heavy-water reactor technology. The existing manufacturing companies are Reaktor-Brennelement Union (RBU) and Alkem. RBU makes natural and enriched UO 2 -fuel assemblies, starting with powder preparation. Facilities to produce UO 2 -gadolinia and UO 2 -ThO 2 fuel are also available. Alkem manufactures mixed-oxide UO 2 /PuO 2 fuel and fuel rods. Zircaloy cladding tubes are produced by Nuklearrohr-Gesellschaft (NRG) and Mannesmannroehren-Werke (MRW). Construction of a new fuel manufacturing plant has been announced by Exxon. Supplementary to quality control, an integrated quality assurance system has been established between the reactor vendor's fuel design and engineering division and the existing manufacturing companies for fuel and tubing. Operating experience with LWR and HWR fuel dates back to 1964/65 and has shown good performance. Possible reasons for a small fraction of defective rods could be identified quickly by a fast feedback system incorporating close co-operation between Kraftwerk Union (KWU) and the utilities. KWU combines fuel development, hot-cell and pool-side service facilities as well as fuel technology linked to manufacturing. The responsibility of KWU for core and fuel design, which enabled an integral optimization, was also an important reason for the successful operation and design flexibility. (author)

  11. Development of materials for the rapid manufacture of die cast tooling

    Science.gov (United States)

    Hardro, Peter Jason

    The focus of this research is to develop a material composition that can be processed by rapid prototyping (RP) in order to produce tooling for the die casting process. Where these rapidly produced tools will be superior to traditional tooling production methods by offering one or more of the following advantages: reduced tooling cost, shortened tooling creation time, reduced man-hours for tool creation, increased tool life, and shortened die casting cycle time. By utilizing RP's additive build process and vast material selection, there was a prospect that die cast tooling may be produced quicker and with superior material properties. To this end, the material properties that influence die life and cycle time were determined, and a list of materials that fulfill these "optimal" properties were highlighted. Physical testing was conducted in order to grade the processability of each of the material systems and to optimize the manufacturing process for the downselected material system. Sample specimens were produced and microscopy techniques were utilized to determine a number of physical properties of the material system. Additionally, a benchmark geometry was selected and die casting dies were produced from traditional tool materials (H13 steel) and techniques (machining) and from the newly developed materials and RP techniques (selective laser sintering (SLS) and laser engineered net shaping (LENS)). Once the tools were created, a die cast alloy was selected and a preset number of parts were shot into each tool. During tool creation, the manufacturing time and cost was closely monitored and an economic model was developed to compare traditional tooling to RP tooling. This model allows one to determine, in the early design stages, when it is advantageous to implement RP tooling and when traditional tooling would be best. The results of the physical testing and economic analysis has shown that RP tooling is able to achieve a number of the research objectives, namely

  12. Making a vision document tangible using "vision-tactics-metrics" tables.

    Science.gov (United States)

    Drury, Ivo; Slomski, Carol

    2006-01-01

    We describe a method of making a vision document tangible by attaching specific tactics and metrics to the key elements of the vision. We report on the development and early use of a "vision-tactics-metrics" table in a department of surgery. Use of the table centered the vision in the daily life of the department and its faculty, and facilitated cultural change.

  13. Human factors in agile manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Forsythe, C.

    1995-03-01

    As industries position themselves for the competitive markets of today, and the increasingly competitive global markets of the 21st century, agility, or the ability to rapidly develop and produce new products, represents a common trend. Agility manifests itself in many different forms, with the agile manufacturing paradigm proposed by the Iacocca Institute offering a generally accepted, long-term vision. In its many forms, common elements of agility or agile manufacturing include: changes in business, engineering and production practices, seamless information flow from design through production, integration of computer and information technologies into all facets of the product development and production process, application of communications technologies to enable collaborative work between geographically dispersed product development team members and introduction of flexible automation of production processes. Industry has rarely experienced as dramatic an infusion of new technologies or as extensive a change in culture and work practices. Human factors will not only play a vital role in accomplishing the technical and social objectives of agile manufacturing. but has an opportunity to participate in shaping the evolution of industry paradigms for the 21st century.

  14. Determinants of fixed investment by manufacturing firms in a developing country

    Energy Technology Data Exchange (ETDEWEB)

    Bilsborrow, R E

    1977-10-01

    The validity of classical explanations of business investment decisions are examined and evidence is found that a less-pure approach is appropriate in the context of a developing country. A new data base is developed, using an electric model of manufacturing corporations in Colombia. The main empirical findings are: (1) An accelerator was accepted and institutionalized as a long-run investment. (2) Cash flow effects were a slightly more-important determinant of annual-investment variations than the accelerator in accordance with business uncertainties and undeveloped capital and loan markets. (3) Although the balance-sheet risk variable was the best variable in individual firm time-risk regression studies, no firm conclusions can be drawn without further investigation. (4) The single most-important influence on annual variations in investment by aggregates of firms was the availability of foreign exchange, which suggests the impact that changes in government policies can have on investment and economic activity. (5) Investment theory ''explained'' the behavior of foreign-controlled investment in Colombia better than that of Colombian corporations, whose executives may have been less willing to take risks. 56 references.

  15. Development of strength-hardness relationships in additively manufactured titanium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Keist, Jayme S., E-mail: keist@psu.edu; Palmer, Todd A., E-mail: tap103@psu.edu

    2017-05-02

    A major concern for additively manufactured (AM) Ti-6Al-4V components is how AM processing parameters and post-process heat treatments impact the resulting mechanical behavior. The applicability of using microhardness measurements as a predictive tool for yield and tensile strengths of AM Ti-6Al-4V would provide a rapid and useful screening mechanism for ensuring that properties meet requirements in complex geometries. However, microhardness measurements on Ti-6Al-4V exhibit high levels of data variability due to the orientational impact of the α phase. In order to overcome this variability in hardness measurements, a methodology for aggregating microhardness data in individual builds has been developed and validated. By compiling mean microhardness values from various AM components produced by electron beam based directed energy deposition (DED), laser based DED, and laser based powder bed fusion (PBF) processes in the as-deposited and post-process heat treated conditions, strong linear correlations between strength and hardness can be developed in AM materials having a lamellar α+β microstructure. With the addition of strain hardening and α phase orientation contributions to the mean microhardness measurement, the strength-hardness correlations of AM Ti-6Al-4V followed empirically derived models, opening the possibility of using these models to predict strengths from AM components regardless of the AM process or post-process state.

  16. Development of a microcomputer data base of manufacturing, installation, and operating experience for the NSSS designer

    International Nuclear Information System (INIS)

    Borchers, W.A.; Markowski, E.S.

    1986-01-01

    Future nuclear steam supply systems (NSSSs) will be designed in an environment of powerful micro hardware and software and these systems will be linked by local area networks (LAN). With such systems, individual NSSS designers and design groups will establish and maintain local data bases to replace existing manual files and data sources. One such effort of this type in Combustion Engineering's (C-E's) NSSS engineering organization is the establishment of a data base of historical manufacturing, installation, and operating experience to provide designers with information to improve on current designs and practices. In contrast to large mainframe or minicomputer data bases, which compile industry-wide data, the data base described here is implemented on a microcomputer, is design specific, and contains a level of detail that is of interest to system and component designers. DBASE III, a popular microcomputer data base management software package, is used. In addition to the immediate benefits provided by the data base, the development itself provided a vehicle for identifying procedural and control aspects that need to be addressed in the environment of local microcomputer data bases. This paper describes the data base and provides some observations on the development, use, and control of local microcomputer data bases in a design organization

  17. Basic design principles of colorimetric vision systems

    Science.gov (United States)

    Mumzhiu, Alex M.

    1998-10-01

    Color measurement is an important part of overall production quality control in textile, coating, plastics, food, paper and other industries. The color measurement instruments such as colorimeters and spectrophotometers, used for production quality control have many limitations. In many applications they cannot be used for a variety of reasons and have to be replaced with human operators. Machine vision has great potential for color measurement. The components for color machine vision systems, such as broadcast quality 3-CCD cameras, fast and inexpensive PCI frame grabbers, and sophisticated image processing software packages are available. However the machine vision industry has only started to approach the color domain. The few color machine vision systems on the market, produced by the largest machine vision manufacturers have very limited capabilities. A lack of understanding that a vision based color measurement system could fail if it ignores the basic principles of colorimetry is the main reason for the slow progress of color vision systems. the purpose of this paper is to clarify how color measurement principles have to be applied to vision systems and how the electro-optical design features of colorimeters have to be modified in order to implement them for vision systems. The subject of this presentation far exceeds the limitations of a journal paper so only the most important aspects will be discussed. An overview of the major areas of applications for colorimetric vision system will be discussed. Finally, the reasons why some customers are happy with their vision systems and some are not will be analyzed.

  18. Cloud-based design and manufacturing (CBDM) a service-oriented product development paradigm for the 21st century

    CERN Document Server

    2014-01-01

    The book introduces the reader to game-changing ways of building and utilizing Internet-based services related to design and manufacture activities through the cloud. In a broader sense, CBDM refers to a new product realization model that enables collective open innovation and rapid product development with minimum costs through social networking and negotiation platforms between service providers and consumers. It is a type of parallel and distributed system consisting of a collection of inter-connected physical and virtualized service pools of design and manufacturing resources as well as intelligent search capabilities for design and manufacturing solutions. Practicing engineers and decision makers will learn how to strategically position their product development operations for success in a globalized interconnected world.

  19. Win-win for wind and wildlife: a vision to facilitate sustainable development.

    Science.gov (United States)

    Kiesecker, Joseph M; Evans, Jeffrey S; Fargione, Joe; Doherty, Kevin; Foresman, Kerry R; Kunz, Thomas H; Naugle, Dave; Nibbelink, Nathan P; Niemuth, Neal D

    2011-04-13

    Wind energy offers the potential to reduce carbon emissions while increasing energy independence and bolstering economic development. However, wind energy has a larger land footprint per Gigawatt (GW) than most other forms of energy production, making appropriate siting and mitigation particularly important. Species that require large unfragmented habitats and those known to avoid vertical structures are particularly at risk from wind development. Developing energy on disturbed lands rather than placing new developments within large and intact habitats would reduce cumulative impacts to wildlife. The U.S. Department of Energy estimates that it will take 241 GW of terrestrial based wind development on approximately 5 million hectares to reach 20% electricity production for the U.S. by 2030. We estimate there are ∼7,700 GW of potential wind energy available across the U.S., with ∼3,500 GW on disturbed lands. In addition, a disturbance-focused development strategy would avert the development of ∼2.3 million hectares of undisturbed lands while generating the same amount of energy as development based solely on maximizing wind potential. Wind subsidies targeted at favoring low-impact developments and creating avoidance and mitigation requirements that raise the costs for projects impacting sensitive lands could improve public value for both wind energy and biodiversity conservation.

  20. Win-win for wind and wildlife: a vision to facilitate sustainable development.

    Directory of Open Access Journals (Sweden)

    Joseph M Kiesecker

    Full Text Available Wind energy offers the potential to reduce carbon emissions while increasing energy independence and bolstering economic development. However, wind energy has a larger land footprint per Gigawatt (GW than most other forms of energy production, making appropriate siting and mitigation particularly important. Species that require large unfragmented habitats and those known to avoid vertical structures are particularly at risk from wind development. Developing energy on disturbed lands rather than placing new developments within large and intact habitats would reduce cumulative impacts to wildlife. The U.S. Department of Energy estimates that it will take 241 GW of terrestrial based wind development on approximately 5 million hectares to reach 20% electricity production for the U.S. by 2030. We estimate there are ∼7,700 GW of potential wind energy available across the U.S., with ∼3,500 GW on disturbed lands. In addition, a disturbance-focused development strategy would avert the development of ∼2.3 million hectares of undisturbed lands while generating the same amount of energy as development based solely on maximizing wind potential. Wind subsidies targeted at favoring low-impact developments and creating avoidance and mitigation requirements that raise the costs for projects impacting sensitive lands could improve public value for both wind energy and biodiversity conservation.

  1. Dendritic cells for active immunotherapy: optimizing design and manufacture in order to develop commercially and clinically viable products.

    Science.gov (United States)

    Nicolette, C A; Healey, D; Tcherepanova, I; Whelton, P; Monesmith, T; Coombs, L; Finke, L H; Whiteside, T; Miesowicz, F

    2007-09-27

    Dendritic cell (DC) active immunotherapy is potentially efficacious in a broad array of malignant disease settings. However, challenges remain in optimizing DC-based therapy for maximum clinical efficacy within manufacturing processes that permit quality control and scale-up of consistent products. In this review we discuss the critical issues that must be addressed in order to optimize DC-based product design and manufacture, and highlight the DC based platforms currently addressing these issues. Variables in DC-based product design include the type of antigenic payload used, DC maturation steps and activation processes, and functional assays. Issues to consider in development include: (a) minimizing the invasiveness of patient biological material collection; (b) minimizing handling and manipulations of tissue at the clinical site; (c) centralized product manufacturing and standardized processing and capacity for commercial-scale production; (d) rapid product release turnaround time; (e) the ability to manufacture sufficient product from limited starting material; and (f) standardized release criteria for DC phenotype and function. Improvements in the design and manufacture of DC products have resulted in a handful of promising leads currently in clinical development.

  2. Trends and Developments of Higher Education Research in Hong Kong: In Pursuit of a Cosmopolitan Vision

    Science.gov (United States)

    Lo, William Yat Wai; Ng, Felix Sai Kit

    2015-01-01

    With the processes of inter- and intranationalization, higher education in Hong Kong has been rapidly expanding in an effort to develop the city into a regional education hub. This article explores the trends and developments of higher education research (HER) in Hong Kong in the context of inter- and intranationalization. By drawing on the data…

  3. NASA's Planned Fuel Cell Development Activities for 2009 and Beyond in Support of the Exploration Vision

    Science.gov (United States)

    Hoberecht, Mark A.

    2010-01-01

    NASA s Energy Storage Project is one of many technology development efforts being implemented as part of the Exploration Technology Development Program (ETDP), under the auspices of the Exploration Systems Mission Directorate (ESMD). The Energy Storage Project is a focused technology development effort to advance lithium-ion battery and proton-exchange-membrane fuel cell (PEMFC) technologies to meet the specific power and energy storage needs of NASA Exploration missions. The fuel cell portion of the project has as its focus the development of both primary fuel cell power systems and regenerative fuel cell (RFC) energy storage systems, and is led by the NASA Glenn Research Center (GRC) in partnership with the Johnson Space Center (JSC), the Jet Propulsion Laboratory (JPL), the Kennedy Space Center (KSC), academia, and industrial partners. The development goals are to improve stack electrical performance, reduce system mass and parasitic power requirements, and increase system life and reliability.

  4. The realities of Lagos urban development vision on livelihoods of the urban poor

    Directory of Open Access Journals (Sweden)

    Oluwafemi Ayodeji Olajide

    2018-04-01

    Full Text Available Similar to many other cities in sub-Saharan African countries, the struggle between urban development policies and the livelihoods of the urban poor is one of the urban development challenges facing Lagos. This paper examines the realities of the Lagos urban development policies and intiatives on the livelihoods of the urban poor. The state government embarked on series of what it calls sustainable urban transformation policies towards making Lagos ‘an African model megacity’ and a global economic and financial hub that is safe, secure, functional and productive, with a view to achieving poverty alleviation and sustainable development. This paper, through the lens of theoretical and analytical underpinnings of Sustainable Livelihoods Framework, however, argues that the actions of the state government contradict the whole essence of sustainable urban development and poverty alleviation, but reflect an agenda deliberately targeted to further impoverish the poor. While the Sustainable Livelihood was used as the theoretical and analytical framework, this paper essentially focuses on the Policies, Institutions and Processes component of the framework. This provides a unique entry point for understanding the implications of the Lagos urban development aspirations on the livelihoods of the urban poor. The research uses mixed methods research design with a broad range of data-collection methods, including household surveys, interviews, direct observation and photography, documentary review and policy document analysis. The study reveals that there is a disconnection between urban development policies and realities of the poor. The implementation of urban development projects and policies works against the urban poor and resulted in more hardship, through reduction in livelihood opportunities or complete loss of livelihoods. This study, therefore, suggests that one important element in reducing poverty in Lagos’ informal settlements is a policy

  5. Visions and visioning in foresight activities

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Grosu, Dan

    2007-01-01

    The paper discusses the roles of visioning processes and visions in foresight activities and in societal discourses and changes parallel to or following foresight activities. The overall topic can be characterised as the dynamics and mechanisms that make visions and visioning processes work...... or not work. The theoretical part of the paper presents an actor-network theory approach to the analyses of visions and visioning processes, where the shaping of the visions and the visioning and what has made them work or not work is analysed. The empirical part is based on analyses of the roles of visions...... and visioning processes in a number of foresight processes from different societal contexts. The analyses have been carried out as part of the work in the COST A22 network on foresight. A vision is here understood as a description of a desirable or preferable future, compared to a scenario which is understood...

  6. Vision and Displays for Military and Security Applications The Advanced Deployable Day/Night Simulation Project

    CERN Document Server

    Niall, Keith K

    2010-01-01

    Vision and Displays for Military and Security Applications presents recent advances in projection technologies and associated simulation technologies for military and security applications. Specifically, this book covers night vision simulation, semi-automated methods in photogrammetry, and the development and evaluation of high-resolution laser projection technologies for simulation. Topics covered include: advances in high-resolution projection, advances in image generation, geographic modeling, and LIDAR imaging, as well as human factors research for daylight simulation and for night vision devices. This title is ideal for optical engineers, simulator users and manufacturers, geomatics specialists, human factors researchers, and for engineers working with high-resolution display systems. It describes leading-edge methods for human factors research, and it describes the manufacture and evaluation of ultra-high resolution displays to provide unprecedented pixel density in visual simulation.

  7. EMPIRICAL STUDY ON THE ROLE OF COLLABORATION IN NEW PRODUCT DEVELOPMENT IN MANUFACTURING COMPANIES

    Directory of Open Access Journals (Sweden)

    Hao Anh Nguyen

    2018-06-01

    Full Text Available This paper provides new empirical evidence on the effects of internal collaboration (manufacturing involvement and external collaboration (supplier and customer involvement practices on NPD performance and success. Moreover, comparing the collaboration practices and their effects on NPD across 10 countries are provided. Data were collected from high-performance manufacturing (HPM project with the sample of 265 manufacturing companies from 10 countries across the world. Descriptive, variance, correlation and regression analysis were conducted by using SPSS 22.0. Significant linkage between three collaboration practices and NPD performance & NPD success was found by statistical analysis. In addition, the results of this study reveal the significant differences in the implementation of collaboration practices across countries and the effects of those practices on NPD performance and success among countries. This study suggests that high performance and high success rate of NPD process could be achieved by external and internal collaboration in manufacturing companies.

  8. The USEtox story: A survey of model developer visions and user requirements

    DEFF Research Database (Denmark)

    Westh, Torbjørn Bochsen; Hauschild, Michael Zwicky; Birkved, Morten

    2015-01-01

    into LCA software and methods, (4) improve update/testing procedures, (5) strengthen communication between developers and users, and (6) extend model scope. By generalizing our recommendations to guide scientific model development in a broader context, we emphasize to acknowledge different levels of user...... expertise to integrate sound revision and update procedures and to facilitate modularity, data import/export, and incorporation into relevant software and databases during model design and development. Our fully documented approach can inspire performing similar surveys on other LCA-related tools...

  9. Pleiades Visions

    Science.gov (United States)

    Whitehouse, M.

    2016-01-01

    Pleiades Visions (2012) is my new musical composition for organ that takes inspiration from traditional lore and music associated with the Pleiades (Seven Sisters) star cluster from Australian Aboriginal, Native American, and Native Hawaiian cultures. It is based on my doctoral dissertation research incorporating techniques from the fields of ethnomusicology and cultural astronomy; this research likely represents a new area of inquiry for both fields. This large-scale work employs the organ's vast sonic resources to evoke the majesty of the night sky and the expansive landscapes of the homelands of the above-mentioned peoples. Other important themes in Pleiades Visions are those of place, origins, cosmology, and the creation of the world.

  10. Use of reliability engineering in development and manufacturing of metal parts

    International Nuclear Information System (INIS)

    Khan, A.; Iqbal, M.A.; Asif, M.

    2005-01-01

    The reliability engineering predicts modes of failures and weak links before the system is built instead of failure case study. The reliability engineering analysis will help in the manufacturing economy, assembly accuracy and qualification by testing, leading to production of metal parts in an aerospace industry. This methodology will also minimize the performance constraints in any requirement for the application of metal components in aerospace systems. The reliability engineering predicts the life of the parts under loading conditions whether dynamic or static. Reliability predictions can help engineers in making decisions about design of components, materials selection and qualification under applied stress levels. Two methods of reliability prediction i.e. Part Stress Analysis and Part Count have been used in this study. In this paper we will discuss how these two methods can be used to measure reliability of a system during development phases, which includes the measuring effect of environmental and operational variables. The equations are used to measure the reliability of each type of component, as well as, integration for measuring system applied for the reliability analysis. (author)

  11. Creep and Recovery Behaviour of Polyolefin-Rubber Nanocomposites Developed for Additive Manufacturing

    Directory of Open Access Journals (Sweden)

    Fugen Daver

    2016-12-01

    Full Text Available Nanocomposite application in automotive engineering materials is subject to continual stress fields together with recovery periods, under extremes of temperature variations. The aim is to prepare and characterize polyolefin-rubber nanocomposites developed for additive manufacturing in terms of their time-dependent deformation behaviour as revealed in creep-recovery experiments. The composites consisted of linear low density polyethylene and functionalized rubber particles. Maleic anhydride compatibilizer grafted to polyethylene was used to enhance adhesion between the polyethylene and rubber; and multi-walled carbon nanotubes were introduced to impart electrical conductivity. Various compositions of nanocomposites were tested under constant stress in creep and recovery. A four-element mechanistic Burger model was employed to model the creep phase of the composites, while a Weibull distribution function was employed to model the recovery phase of the composites. Finite element analysis using Abaqus enabled numerical modelling of the creep phase of the composites. Both analytical and numerical solutions were found to be consistent with the experimental results. Creep and recovery were dependent on: (i composite composition; (ii compatibilizers content; (iii carbon nanotubes that formed a percolation network.

  12. Product quality considerations for mammalian cell culture process development and manufacturing.

    Science.gov (United States)

    Gramer, Michael J

    2014-01-01

    The manufacturing of a biologic drug from mammalian cells results in not a single substance, but an array of product isoforms, also known as variants. These isoforms arise due to intracellular or extracellular events as a result of biological or chemical modification. The most common examples related to biomanufacturing include amino acid modifications (glycosylation, isomerization, oxidation, adduct formation, pyroglutamate formation, phosphorylation, sulfation, amidation), amino acid sequence variants (genetic mutations, amino acid misincorporation, N- and C-terminal heterogeneity, clipping), and higher-order structure modifications (misfolding, aggregation, disulfide pairing). Process-related impurities (HCP, DNA, media components, viral particles) are also important quality attributes related to product safety. The observed ranges associated with each quality attribute define the product quality profile. A biologic drug must have a correct and consistent quality profile throughout clinical development and scale-up to commercial production to ensure product safety and efficacy. In general, the upstream process (cell culture) defines the quality of product-related substances, whereas the downstream process (purification) defines the residual level of process- and product-related impurities. The purpose of this chapter is to review the impact of the cell culture process on product quality. Emphasis is placed on studies with industrial significance and where the direct mechanism of product quality impact was determined. Where possible, recommendations for maintaining consistent or improved quality are provided.

  13. Technical note: development of a quantitative PCR method for monitoring strain dynamics during yogurt manufacture.

    Science.gov (United States)

    Miller, D M; Dudley, E G; Roberts, R F

    2012-09-01

    Yogurt starter cultures may consist of multiple strains of Lactobacillus delbrueckii ssp. bulgaricus (LB) and Streptococcus thermophilus (ST). Conventional plating methods for monitoring LB and ST levels during yogurt manufacture do not allow for quantification of individual strains. The objective of the present work was to develop a quantitative PCR method for quantification of individual strains in a commercial yogurt starter culture. Strain-specific primers were designed for 2 ST strains (ST DGCC7796 and ST DGCC7710), 1 LB strain (DGCC4078), and 1 Lactobacillus delbrueckii ssp. lactis strain (LL; DGCC4550). Primers for the individual ST and LB strains were designed to target unique DNA sequences in clustered regularly interspersed short palindromic repeats. Primers for LL were designed to target a putative mannitol-specific IIbC component of the phosphotransferase system. Following evaluation of primer specificity, standard curves relating cell number to cycle threshold were prepared for each strain individually and in combination in yogurt mix, and no significant differences in the slopes were observed. Strain balance data was collected for yogurt prepared at 41 and 43°C to demonstrate the potential application of this method. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  14. Development of manufacturing method of thermal-resisting concrete with highly synthesizing xonotolite

    International Nuclear Information System (INIS)

    Yamamoto, Takeshi; Hironaga, Michihiko

    2006-01-01

    Xonotolite is one of the most stable Ca-Si hydration compounds in the cementitious material. The authors have been developing anti-drying shrinkage concrete with focusing on the stable compounds, i.e. Tobermorite and Xonotolite. In this study, we proposed the manufacturing method of anti-drying shrinkage concrete with using low calcium/silica ratio cementitious material and applying autoclave curing. The compressive strength of proposed concrete was about 40N/mm 2 , and drying shrinkage under 110degC for 1 year was ranged from 0.04 to 0.06%. There was no amount released of combined water from the proposed concrete during exposure, so the stability of main synthesized compound in the proposed concrete was clarified. On the other hand, the conventional cementitious mortar showed from 0.1 to 0.13% of drying shrinkage and high amount release of combined water from the surface area of C-S-H colloid with resulting to widen the volume of pore among the colloid particle of C-S-H. (author)

  15. Testing Starshade Manufacturing and Deployment Through NASA's Technology Development for Exoplanet Missions Program

    Science.gov (United States)

    Kasdin, N. J.; Shaklan, S.; Lisman, D.; Thomson, M.; Cady, E.; Lo, A.; Macintosh, B.

    2014-01-01

    An external occulter is a satellite employing a large screen, or starshade, that flies in formation with a spaceborne telescope to provide the starlight suppression needed for detecting and characterizing exoplanets. Among the advantages of using an occulter are the broadband allowed for characterization and the removal of light before entering the observatory, greatly relaxing the requirements on the telescope and instrument. In this poster we report on the results of our two Technology Development for Exoplanet Missions (TDEM) studies. In the first we examined the manufacturability and metrology of starshade petals, successfully constructing a full size petal from flight like materials and showing through precise edge shape measurements that an occulter made with petals consistent with the measured accuracy would achieve close to 10^-10 contrast. Our second TDEM tested the deployment precision of a roughly half-scale starshade. We demonstrated the deployment of an existing deployable truss outfitted with four sub-scale petals and a custom designed central hub. We showed that the system can be deployed multiple times with a repeatable positioning accuracy of the petals better than the requirement of 1.0 mm. The combined results of these two TDEM projects has significantly advanced the readiness level of occulter technology and moved the community closer to a realizable mission.

  16. Lambda Vision

    Science.gov (United States)

    Czajkowski, Michael

    2014-06-01

    There is an explosion in the quantity and quality of IMINT data being captured in Intelligence Surveillance and Reconnaissance (ISR) today. While automated exploitation techniques involving computer vision are arriving, only a few architectures can manage both the storage and bandwidth of large volumes of IMINT data and also present results to analysts quickly. Lockheed Martin Advanced Technology Laboratories (ATL) has been actively researching in the area of applying Big Data cloud computing techniques to computer vision applications. This paper presents the results of this work in adopting a Lambda Architecture to process and disseminate IMINT data using computer vision algorithms. The approach embodies an end-to-end solution by processing IMINT data from sensors to serving information products quickly to analysts, independent of the size of the data. The solution lies in dividing up the architecture into a speed layer for low-latent processing and a batch layer for higher quality answers at the expense of time, but in a robust and fault-tolerant way. This approach was evaluated using a large corpus of IMINT data collected by a C-130 Shadow Harvest sensor over Afghanistan from 2010 through 2012. The evaluation data corpus included full motion video from both narrow and wide area field-of-views. The evaluation was done on a scaled-out cloud infrastructure that is similar in composition to those found in the Intelligence Community. The paper shows experimental results to prove the scalability of the architecture and precision of its results using a computer vision algorithm designed to identify man-made objects in sparse data terrain.

  17. [A new vision of nursing: the evolution and development of nursing informatics].

    Science.gov (United States)

    Feng, Rung-Chuang; Yeh, Yu-Ting

    2014-08-01

    Technology development trends in the 21st century are increasingly focused on the development of interdisciplinary applications. Advanced information technology may be applied to integrate nursing care information, simplify nursing processes, and reduce the time spent on work tasks, thereby increasing the amount of time that clinical personnel are available to care for patients and ensuring that patients are provided with high-quality and personalized care services. The development of nursing information began in Taiwan in 2003 and has since expanded and thrived. The ability of nursing information to connect formerly insular national nursing communities promotes the international visibility of Taiwan. The rapid development of nursing information in Taiwan, resulting in the production of informative and outstanding results, has received worldwide attention. The Taiwan Nursing Informatics Association was established in 2006 to nurture nursing information professionals, develop and apply information technology in the health care domain, and facilitate international nursing information exchanges. The association actively promotes nursing information in the areas of administration, education, research, and clinical practice, thereby integrating nursing with empirical applications to enhance the service quality and management of nursing and increase the benefits of nursing teaching and research. To convert information into knowledge, the association develops individualized strategies for managing mobile care and employs an interagency network to exchange and reintegrate resources, establishing active, intelligent nursing based on network characteristics and an empirical foundation. The mid- and long-term objectives of the association involve introducing cloud computing and facilitating the meaningful use of nursing information in both public and government settings, thereby creating a milestone of developing and expanding nursing information unique to Taiwan.

  18. IDA's Energy Vision 2050

    DEFF Research Database (Denmark)

    Mathiesen, Brian Vad; Lund, Henrik; Hansen, Kenneth

    IDA’s Energy Vision 2050 provides a Smart Energy System strategy for a 100% renewable Denmark in 2050. The vision presented should not be regarded as the only option in 2050 but as one scenario out of several possibilities. With this vision the Danish Society of Engineers, IDA, presents its third...... contribution for an energy strategy for Denmark. The IDA’s Energy Plan 2030 was prepared in 2006 and IDA’s Climate Plan was prepared in 2009. IDA’s Energy Vision 2050 is developed for IDA by representatives from The Society of Engineers and by a group of researchers at Aalborg University. It is based on state......-of-the-art knowledge about how low cost energy systems can be designed while also focusing on long-term resource efficiency. The Energy Vision 2050 has the ambition to focus on all parts of the energy system rather than single technologies, but to have an approach in which all sectors are integrated. While Denmark...

  19. Colour, vision and ergonomics.

    Science.gov (United States)

    Pinheiro, Cristina; da Silva, Fernando Moreira

    2012-01-01

    This paper is based on a research project - Visual Communication and Inclusive Design-Colour, Legibility and Aged Vision, developed at the Faculty of Architecture of Lisbon. The research has the aim of determining specific design principles to be applied to visual communication design (printed) objects, in order to be easily read and perceived by all. This study target group was composed by a selection of socially active individuals, between 55 and 80 years, and we used cultural events posters as objects of study and observation. The main objective is to overlap the study of areas such as colour, vision, older people's colour vision, ergonomics, chromatic contrasts, typography and legibility. In the end we will produce a manual with guidelines and information to apply scientific knowledge into the communication design projectual practice. Within the normal aging process, visual functions gradually decline; the quality of vision worsens, colour vision and contrast sensitivity are also affected. As people's needs change along with age, design should help people and communities, and improve life quality in the present. Applying principles of visually accessible design and ergonomics, the printed design objects, (or interior spaces, urban environments, products, signage and all kinds of visually information) will be effective, easier on everyone's eyes not only for visually impaired people but also for all of us as we age.

  20. School Vision of Learning: Urban Setting

    Science.gov (United States)

    Guy, Tiffany A.

    2010-01-01

    In this paper, the author develops her school vision of learning. She explains the theories she used to help develop the vision. The author then goes into detail on the methods she will use to make her vision for a school that prepares urban students for a successful life after high school. She takes into account all the stakeholders and how they…

  1. Coaching Peripheral Vision Training for Soccer Athletes

    Science.gov (United States)

    Marques, Nelson Kautzner, Jr.

    2010-01-01

    Brazilian Soccer began developing its current emphasis on peripheral vision in the late 1950s, by initiative of coach of the Canto do Rio Football Club, in Niteroi, Rio de Janeiro, a pioneer in the development of peripheral vision training in soccer players. Peripheral vision training gained world relevance when a young talent from Canto do Rio,…

  2. Evaluation of PMBOK and scrum practices for software development in the vision of specialists

    Directory of Open Access Journals (Sweden)

    Elton Fernandes Gonçalves

    2017-07-01

    Full Text Available In project management, the challenge for software development is to achieve success for the proposed projects, using methods such as PMBOK and Scrum. Knowledge of the advantages of these methods are critical success factors for product development. Therefore, the proposal of this study was to verify the perception of specialists of the area of software development on practices of project management. The used methods in this study were the bibliographic, exploratory and qualitative research, with the construction of a questionnaire with 14 items on the advantages of project management practices of various natures, size and complexity, which were applied in 90 specialists. The results of the research demonstrated that all the experts agreed with the advantages of the project management practices, identified based on the literature review, for software development, thus validating the proposed items of the questionnaire. It is recommended for future researches the accomplishment of case studies that explore practical models of evaluation of the use of the practices studied in the scope of software development. It is important in these future studies that metrics and indicators are drawn for each of the advantages cited in the present study.

  3. Adaptation of WHOQOL as health-related quality of life instrument to develop a vision-specific instrument.

    Directory of Open Access Journals (Sweden)

    Dandona Lalit

    2000-01-01

    Full Text Available The WHOQOL instrument was adapted as a health-related QOL instrument for a population-based epidemiologic study of eye diseases in southern India, the Andhra Pradesh Eye Disease Study (APEDS. A follow-up question was added to each item in WHOQOL to determine whether the decrease in QOL was due to any health reasons including eye-related reasons. Modifications in WHOQOL and translation in local language were done through the use of the focus groups including health professionals and people not related to health care. The modified instrument has 28 items across 6 domains of the WHOQOL and was translated into the local language, Telugu, using the pragmatic approach. It takes 10-20 minutes to be administered by a trained interviewer. Reliability was within acceptable range. This health-related QOL instrument is being used in the population-based study APEDS to develop a vision-specific QOL instrument which could potentially be used to assess the impact of visual impairment on QOL across different cultures and for use in evaluating eye-care interventions. This health-related QOL instrument could also be used to develop other disease-specific instruments as it allows assessment of the extent to which various aspects of QOL are affected by a variety of health problems.

  4. Developing a Vision: Incorporating Ecosystem Services into Decision Making - Proceedings of a Workshop

    Science.gov (United States)

    Hogan, Dianna; Arthaud, Greg; Goodman, Iris; Pattison, Malka; Sayre, Roger G.; Shapiro, Carl; Van Horne, Bea

    2009-01-01

    The production, location, use, and value of ecosystem services have become an important factor in resource management. Decisions relating to resource conservation and restoration, as well as development, require an understanding of the services provided by natural systems and the response of these systems to natural and human-induced change. Increased demands for development and the resulting pressures on ecosystem services have lent urgency to the need for an improved understanding of the value of natural capital. However, resource management decisions are often made without considering the importance and value of services resulting from natural systems.

  5. Application of a B ampersand W developed computer aided pictorial process planning system to CQMS for manufacturing process control

    International Nuclear Information System (INIS)

    Johanson, D.C.; VandeBogart, J.E.

    1992-01-01

    Babcock ampersand Wilcox (B ampersand W) will utilize its internally developed Computer Aided Pictorial Process Planning or CAPPP (pronounced open-quotes cap cubedclose quotes) system to create a paperless manufacturing environment for the Collider Quadruple Magnets (CQM). The CAPPP system consists of networked personal computer hardware and software used to: (1) generate and maintain the documents necessary for product fabrication, (2) communicate the information contained in these documents to the production floor, and (3) obtain quality assurance and manufacturing feedback information from the production floor. The purpose of this paper is to describe the various components of the CAPPP system and explain their applicability to product fabrication, specifically quality assurance functions

  6. An integrated approach for developing a technology strategy framework for small- to medium-sized furniture manufacturers to improve competitiveness

    Directory of Open Access Journals (Sweden)

    Lourens, A.S.

    2013-05-01

    Full Text Available Low-technology firms, such as those found within the furniture manufacturing industry, have no framework or methodology to guide them successfully to acquire and integrate technology that enables them to operate more competitively. The aim of this article is to illustrate the development of a technology strategy framework for small- to medium-sized furniture manufacturers to assist them to improve their competitiveness. More specifically, this article presents an integrated technology strategy framework that enables management to integrate their business strategy with their technology requirements successfully, thus improving competitiveness.

  7. The current state of development works for manufacturing and methods of controlling the nuclear fuel for NPPs of Ukraine

    International Nuclear Information System (INIS)

    Odeychuk, N.P.; Levenets, V.V.; Krasnorutsky, V.S.

    2000-01-01

    The paper presents the results of NSC KIPT researches on manufacturing the fuel microspheres and pellets based on uranium dioxide. The data on fuel characteristics for different manufacturing stages are given. The problems of improving the fuel quality with changing the structure characteristics of pellets are considered. Demonstrated is the hardware for pellet controlling and presented are the new ways for developing the methods of controlling the nuclear fuel: X-ray fluorescent analysis; complex of nuclear-physical methods on the base of accelerators; laser-excitation energy-mass-spectrometer. (author)

  8. Behind the development of technology: The transition of innovation modes in China’s wind turbine manufacturing industry

    International Nuclear Information System (INIS)

    Ru Peng; Zhi Qiang; Zhang Fang; Zhong Xiaotian; Li Jianqiang; Su Jun

    2012-01-01

    The market scale of China’s wind turbine manufacturing industry has grown immensely. Despite China still having a limited capacity in terms of technology innovation, the institutional support has promoted the technology capability development of the wind turbine manufacturing industry. This paper explores the driving forces underlying this development by reviewing the transition of the innovation modes and the dynamic interactions among the technology capability, innovation modes, market formation, and wind energy policy. The innovation mode in China began with imitative innovation, then transitioned to cooperative innovation, and has more recently set its sights on attaining truly indigenous innovation. Public policy serves as a key driving force for the evolution of innovation modes, as well as the development of the market. The policy focus has evolved in the following sequence: 1. building the foundation for technological innovation; 2. encouraging technology transfer; 3. enhancing local R and D and manufacturing capabilities; 4. enlarging the domestic market; and 5. cultivating an open environment for global competition and sustainable market development in China. - Highlights: ► New data were provided for China’s wind turbine manufacturing industry. ► The transition of innovation modes in the industry is reviewed. ► The interaction among the technology, market, policy, and innovation mode is explored. ► Public policies are the key driving forces for the transition.

  9. Tokamak Physics EXperiment (TPX): Toroidal field magnet design, development and manufacture. SDRL 21, Materials and processes selection. Volume 2

    International Nuclear Information System (INIS)

    Smith, B.R.

    1995-01-01

    This document identifies the candidate materials and manufacturing processes selected for development of the TPX Toroidal Field (TF) Magnet. Supporting rationale and selection criteria are provided for justification and the materials properties database report is included for completeness. Specific properties for each material selection are included in this document

  10. Export and Economic Growth in the Case of the Manufacturing Industry: Panel Data Analysis of Developing Countries

    Directory of Open Access Journals (Sweden)

    Emine Kılavuz

    2012-01-01

    Full Text Available The correlation between growth in export and economic growth, which is called “Export-led Growth Hypothesis” in the literature, is still a current issue in both the theoretical and empirical literature. In the present study, the effect of different classifications of export and import on economic growth in 22 developing countries in the 1998–2006 period was tested based on two models, via panel data analysis. According to the results of the first model, the analysis of which included variables such as high and low-tech manufacturing industry exports, investment and population, it was found that only two variables, high-tech manufacturing industry export and investment, have a positive and significant effect on growth. In addition to the first model which included the analysis of all variables, the second model investigated the effect of high and low-tech manufacturing industry imports on growth. The findings revealed that only high-tech manufacturing industry export, investment and low-tech manufacturing industry import have a positive and significant effect on growth.

  11. Low Vision Enhancement System

    Science.gov (United States)

    1995-01-01

    NASA's Technology Transfer Office at Stennis Space Center worked with the Johns Hopkins Wilmer Eye Institute in Baltimore, Md., to incorporate NASA software originally developed by NASA to process satellite images into the Low Vision Enhancement System (LVES). The LVES, referred to as 'ELVIS' by its users, is a portable image processing system that could make it possible to improve a person's vision by enhancing and altering images to compensate for impaired eyesight. The system consists of two orientation cameras, a zoom camera, and a video projection system. The headset and hand-held control weigh about two pounds each. Pictured is Jacob Webb, the first Mississippian to use the LVES.

  12. Learning to Notice Mathematics Instruction: Using Video to Develop Preservice Teachers' Vision of Ambitious Pedagogy

    Science.gov (United States)

    van Es, Elizabeth A.; Cashen, Mary; Barnhart, Tara; Auger, Anamarie

    2017-01-01

    Video is used extensively in teacher preparation, raising questions about what and how preservice teachers learn through video observation and analysis. We investigate the development of candidates' noticing of ambitious mathematics pedagogy in the context of a video-based course designed to cultivate ways of seeing and interpreting classroom…

  13. Development, Validation, and Deployment of an Occupational Test of Color Vision for Air Traffic Control Specialists

    Science.gov (United States)

    2011-05-01

    direct sampling of form and content of critical display data. Evidence of construct validity is provided by correlation with Colour Assessment and...testing resulted in development of tests such as the Colour Assessment and Diagnosis Test (CAD; Rodriguez -Carmona, Harlow, Walker, & Barbur, 2005...Great Lakes Regional PEPC who failed initial screening on the Dvorine PIP test. Volunteers were recruited through advertisements in local

  14. Bio-reinforced composite development for additive manufacturing: Nanocellulose-PLA

    Energy Technology Data Exchange (ETDEWEB)

    Tekinalp, Halil L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lu, Yuan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kunc, Vlastimil [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Duty, Chad E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Love, Lonnie J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Peter, William H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ozcan, Soydan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-07-01

    Additive manufacturing (AM) is transitioning from being only a prototyping method towards becoming a manufacturing technique for the quick production of parts with complex geometries. For the complete realization of this transition, the mechanical properties of the printed parts have to meet the requirements of actual load-bearing structural components. Integration of a reinforcing second phase into a polymer is a viable approach for the improvement of resins mechanical performance. Addition of carbon fibers into acrylonitrile-butadiene-styrene (ABS) has already been shown to improve its mechanical properties compared to the neat ABS resin (both additively manufactured), and led to the manufacture of world s first 3D-printed car. However, both ABS resin and carbon fibers are petroleum-based products, and there is a continuous search for alternative, bio-sourced, renewable materials as a feedstock for manufacturing. Towards this direction, we have investigated the potential of cellulose nanofibril-reinforced polylactic acid (PLA) resin systems as an alternative. CNF-PLA composite systems with up to 40 wt% CNF loadings were prepared via compression molding technique and tested. Significant improvements in both tensile strength (80%) and elastic modulus (128%) were observed. Filaments prepared from the same compositions were also successfully 3D-printed into tensile testing specimens with up to 30% CNF concentrations, and showed similar improvements in mechanical performance. Although CNFs were not individually dispersed in PLA matrix, they were observed to be well blended with the polymer based on SEM micrographs. In summary, preparation and 3D-printing of a 100% bio-based feedstock material with the mechanical properties comparable to the carbon fiber-ABS system was successfully demonstrated that it can open up new window of opportunities in the additive manufacturing industry. Acknowledgement Research sponsored by the U.S. Department of Energy, Office of Energy

  15. Nuclear fuel in water reactors: manufacturing technology operational experience and development activities in the Federal Republic of Germany

    International Nuclear Information System (INIS)

    Holzer, R.; Knoedler, D.

    1977-01-01

    The nuclear fuel industry in the F.R. Germany comprises the full range of manufacturing capabilities for pressurized - boiling- and heavy water reactor technology. The existing manufacturing companies are RBU and Alkem. RBU makes natural and enriched UO 2 -fuel assemblies, starting with powder preparation. Facilites to produce UO 2 -Gadolinia and UO 2 -ThO 2 fuel are also available. Alkem is manufacturing mixed oxide UO 2 /PuO 2 -fuel and -rods. Zircaloy cladding tubes are produced by NRG and MRW. This constitutes the largest single nuclear fuel manufacturing capacity outside the USA. The companies are interested in export and current capacity trends indicate some overcapacity caused by delays in plant schedules. Construction of a new fuel manufacturing plant in the FRG has been announced by Exxon. Supplementary to quality control in manufacturing an integrated quality assurance-system has been established between the reactor vendor KWU, fuel design and -engineering division, and the existing manufacturing companies for fuel and tubing. The operating experience with LWR and HWR fuel dates back to 1964/65 and proves good performance. No generic problems like densification or rod bow were encountered. Possible reasons for the small fraction of defective rods could be quickly identified by a fast feedback system incorporating a close cooperation between KWU and the utilities. KWU combines fuel development, hot-cell and poolside service facilities as well as fuel technology linking to manufacturing in one hand. The common responsibility of KWU for core- and fuel design which enabled an integral optimization was also an important reason for the successful operation and flexibility in design. Development efforts will be concentrated on tests to improve the understanding of power ramping capability under extreme operational and postulated abnormal conditions, on statistical evaluation of safety aspects and on improved economy. The LWR fuel development was sponsored by the

  16. Science or fiction. Vision on sustainable development of North Netherlands up to 2015

    International Nuclear Information System (INIS)

    Abma, Albert-Jan

    1999-09-01

    Sustainable development means that economic growth and ecological improvement require a simultaneous realization, in spite of their apparent discrepancy. Ecological objectives need economic support, while economic activities rely on properly functioning ecosystems. Therefore, programs for economic development must have good prospects for the ecology. In line with this premise the Stade Declaration 1997 (Trilateral Wadden Sea Program) examines the chances for sustainable development of the Wadden Sea region. This report contributes to an outlook on these chances in the year 2015. The outlook is designed by 'backcasting' the technological development in 2015 from ecological objectives for a sustainable system in 2040. In 2040 advanced technologies will be in practice; renewable resources will replace fossil energy and materials. Crops will meet the need for food and materials; solar energy is the main power source. Production of waste and emissions to the environment will be considered as inefficient, so the efficiency of production and application of materials will be optimized and any emission will fit in the ecological cycles. The Wadden Sea region offers some advantages to meet these objectives. Agriculture and farming/processing industries are well developed, chemical industries and power stations are available; the Wadden Sea and the open landscape of the region are of high ecological value. In the outlook on 2015 the utilization of crops will be optimized: 'the plant is the plant of the future'. High-quality applications are reserved for various constituents of crops, available by fractionating not only the usual crops like sugar beets and potatoes, but also new crops and various former waste products like branches and leaves. The cultivation of new crops is favorable, as the entire crop is usable in integrated processes. Components of both plant fibers and juices are separated and converted into bulk materials and specialities. The main processes in the

  17. Development of manufacturing process for production of 500 MWe calandria sheets

    International Nuclear Information System (INIS)

    Hariharan, R.; Ramesh, P.; Lakshminarayana, B.; Bhaskara Rao, C.V.; Pande, P.; Agarwala, G.C.

    1992-01-01

    Calandria tubes made of zircaloy-2 are being used as structural components in pressurised heavy water power reactors. The sheets required for producing calandria tube for 235 MWe reactors are being manufactured at Zircaloy Fabrication Plant (ZFP), NFC utilizing a 2 Hi/4 Hi rolling mill procured for the purpose, by carrying out cold rolling process to achieve the required size after hot rolling suitable extruded slabs. Due to limitation of width of the sheet that can be rolled with the mill as well as the size of the slab that can be extruded with the existing press, difficulties arose in producing acceptable full length sheets of size 6600 mm long x 435 mm wide x 1.6 mm thick for manufacturing 500 MWe calandria tube. This paper deals with the details of the process problem resolved. They are: (a)designing of suitable hot and cold rolling pass schedules, (b)selection and standardization of process parameters such as beta quenching, hot rolling and cold rolling, and (c)details of the overall manufacturing process. Due to implementation of above, sheets required for manufacturing 500 MWe calandria tube sheets were successfully rolled. About 40 nos. of acceptable full length sheets have already been manufactured. (author). 1 fig., 3 tabs

  18. The use of open and machine vision technologies for development of gesture recognition intelligent systems

    Science.gov (United States)

    Cherkasov, Kirill V.; Gavrilova, Irina V.; Chernova, Elena V.; Dokolin, Andrey S.

    2018-05-01

    The article is devoted to reflection of separate aspects of intellectual system gesture recognition development. The peculiarity of the system is its intellectual block which completely based on open technologies: OpenCV library and Microsoft Cognitive Toolkit (CNTK) platform. The article presents the rationale for the choice of such set of tools, as well as the functional scheme of the system and the hierarchy of its modules. Experiments have shown that the system correctly recognizes about 85% of images received from sensors. The authors assume that the improvement of the algorithmic block of the system will increase the accuracy of gesture recognition up to 95%.

  19. The challenge of sustainable development in a greenhouse world: Some visions of the future

    International Nuclear Information System (INIS)

    Jaeger, J.; Sonntag, N.; Bernard, D.; Kurz, W.

    1991-01-01

    Although ''policy exercises'' (PE) are still a novel approach to dealing with complex, large-scale issues such as acid precipitation, multi-national environmental planning, or global climatic change, they should not be viewed as an untested tool. The term ''policy exercise'' as used in this project was defined as ''a deliberate procedure in which goals and objectives are systematically clarified and strategic alternatives are invented and evaluated in terms of the values at stake. The exercise is a preparatory activity for effective participation in official decision processes; its outcomes are not official decisions.'' The participants at the September meeting received a detailed ''Briefing Book'' about a month beforehand to assist them in their preparations. This book listed three detailed objectives to guide the meeting: (1) to evolve and apply experimental methods and tools for making the scientific knowledge and information on climate change more useful to policy makers; (2) to use the Policy Exercise method to explore ideas on policy actions, research initiatives, and communications programs required to improve the debate on the climate change issue; and (3) to develop a set of recommendations on directions that should be taken to further develop and apply the Policy Exercise methods and tools

  20. Thermoplastic Composites Reinforced with Textile Grids: Development of a Manufacturing Chain and Experimental Characterisation

    Science.gov (United States)

    Böhm, R.; Hufnagl, E.; Kupfer, R.; Engler, T.; Hausding, J.; Cherif, C.; Hufenbach, W.

    2013-12-01

    A significant improvement in the properties of plastic components can be achieved by introducing flexible multiaxial textile grids as reinforcement. This reinforcing concept is based on the layerwise bonding of biaxially or multiaxially oriented, completely stretched filaments of high-performance fibers, e.g. glass or carbon, and thermoplastic components, using modified warp knitting techniques. Such pre-consolidated grid-like textiles are particularly suitable for use in injection moulding, since the grid geometry is very robust with respect to flow pressure and temperature on the one hand and possesses an adjustable spacing to enable a complete filling of the mould cavity on the other hand. The development of pre-consolidated textile grids and their further processing into composites form the basis for providing tailored parts with a large number of additional integrated functions like fibrous sensors or electroconductive fibres. Composites reinforced in that way allow new product groups for promising lightweight structures to be opened up in future. The article describes the manufacturing process of this new composite class and their variability regarding reinforcement and function integration. An experimentally based study of the mechanical properties is performed. For this purpose, quasi-static and highly dynamic tensile tests have been carried out as well as impact penetration experiments. The reinforcing potential of the multiaxial grids is demonstrated by means of evaluating drop tower experiments on automotive components. It has been shown that the load-adapted reinforcement enables a significant local or global improvement of the properties of plastic components depending on industrial requirements.

  1. The development of additive manufacturing technique for nickel-base alloys: A review

    Science.gov (United States)

    Zadi-Maad, Ahmad; Basuki, Arif

    2018-04-01

    Nickel-base alloys are an attractive alloy due to its excellent mechanical properties, a high resistance to creep deformation, corrosion, and oxidation. However, it is a hard task to control performance when casting or forging for this material. In recent years, additive manufacturing (AM) process has been implemented to replace the conventional directional solidification process for the production of nickel-base alloys. Due to its potentially lower cost and flexibility manufacturing process, AM is considered as a substitute technique for the existing. This paper provides a comprehensive review of the previous work related to the AM techniques for Ni-base alloys while highlighting current challenges and methods to solving them. The properties of conventionally manufactured Ni-base alloys are also compared with the AM fabricated alloys. The mechanical properties obtained from tension, hardness and fatigue test are included, along with discussions of the effect of post-treatment process. Recommendations for further work are also provided.

  2. Development of a tool to aid the radiologic technologist using augmented reality and computer vision

    International Nuclear Information System (INIS)

    MacDougall, Robert D.; Scherrer, Benoit; Don, Steven

    2018-01-01

    This technical innovation describes the development of a novel device to aid technologists in reducing exposure variation and repeat imaging in computed and digital radiography. The device consists of a color video and depth camera in combination with proprietary software and user interface. A monitor in the x-ray control room displays the position of the patient in real time with respect to automatic exposure control chambers and image receptor area. The thickness of the body part of interest is automatically displayed along with a motion indicator for the examined body part. The aim is to provide an automatic measurement of patient thickness to set the x-ray technique and to assist the technologist in detecting errors in positioning and motion before the patient is exposed. The device has the potential to reduce the incidence of repeat imaging by addressing problems technologists encounter daily during the acquisition of radiographs. (orig.)

  3. DEVELOPMENT OF TECHNOLOGIES AND ANALYTICAL CAPABILITIES FOR VISION 21 ENERGY PLANTS

    International Nuclear Information System (INIS)

    Madhava Syamlal, Ph.D.

    2001-01-01

    The training of a new project team member was completed (Task 2.1). The Software Requirements Document was written (Task 2.3). It was determined that the CAPE-OPEN interfaces are sufficient for the communication between Fluent and V21 Controller (Task 2.4). The AspenPlus-Fluent prototype on allyl/triacetone alcohol production was further developed to assist the GUI and software design tasks. The prototype was also used to analyze the sensitivity of a process simulation result with respect to a parameter in a CFD model embedded in the process simulation. Thus the integration of process simulation and CFD provides additional process insights and enables the engineer to optimize overall process performance (e.g., product purity and yield) with respect to important CFD design and operation parameters (e.g., CSTR shaft speed). A top-level design of the V21 Controller was developed and discussed. A draft version of the Software Design Document was written (Task 2.5/2.6). A preliminary software development plan was outlined. At first the V21 Controller will be developed and tested in two parts--a part that communicates with Fluent and a part that communicates with Aspen Plus. Then the two parts will be combined and tested with the allyl/triacetone alcohol flow sheet simulation. Much progress was made in writing the code for the two parts (Task 2.7). A requirement for pre-configured models was identified and added to the software requirements document (Task 2.9). Alstom Power's INDVU code was ported to the PC platform and calibrated. Aspen Plus model of the RP and L unit was improved to reflect the latest information received on the unit. Thus the preparation for linking INDVU code with the Aspen Plus model of RP and L unit is complete (Task 2.14). A report describing Demo Case 1 was written and submitted to DOE for review and approval (Task 3.1). The first Advisory Board meeting was held at the Fluent Users Group Meeting on June 6th. At the Advisory Board meeting, the

  4. Sustainable housing as part of sustainable development - visions and experiences from Denmark

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    2010-01-01

    The paper discusses different approaches to sustainable development with main focus on sustainable housing, but also local climate activities with focus on transportation, food and local businesses are discussed. The focus in the paper is mainly on experiences from Denmark. The paper starts out...... with a short introduction to theoretical approaches to analyses of sustainable housing and other sustainability initiatives as innovation processes. Afterwards some social and political characteristics of Denmark are presented and one of the recent sustainability initiatives in Denmark, the climate plan from...... the Danish Society of Engineers is described. The second part of the paper discusses Danish sustainable housing strategies focusing on new houses and refurbishment of existing houses. Finally some recent experiences from a local climate cooperation between a technical university, a municipal administration...

  5. Development of a tool to aid the radiologic technologist using augmented reality and computer vision

    Energy Technology Data Exchange (ETDEWEB)

    MacDougall, Robert D.; Scherrer, Benoit [Boston Children' s Hospital, Department of Radiology, Boston, MA (United States); Don, Steven [Washington University School of Medicine, Mallinckrodt Institute of Radiology, St. Louis, MO (United States)

    2018-01-15

    This technical innovation describes the development of a novel device to aid technologists in reducing exposure variation and repeat imaging in computed and digital radiography. The device consists of a color video and depth camera in combination with proprietary software and user interface. A monitor in the x-ray control room displays the position of the patient in real time with respect to automatic exposure control chambers and image receptor area. The thickness of the body part of interest is automatically displayed along with a motion indicator for the examined body part. The aim is to provide an automatic measurement of patient thickness to set the x-ray technique and to assist the technologist in detecting errors in positioning and motion before the patient is exposed. The device has the potential to reduce the incidence of repeat imaging by addressing problems technologists encounter daily during the acquisition of radiographs. (orig.)

  6. Your Vision or My Model? Lessons from Participatory Land Use Scenario Development on a European Scale

    DEFF Research Database (Denmark)

    Volkery, Axel; Ribeiro, Teresa; Henrichs, Thomas

    2008-01-01

    different perspectives. However, this task is all but easy as it requires a careful balancing of approaches and an acceptance of different levels of knowledge and trust in different methods across disciplinary boundaries. In spite of a growing body of literature we are still in the early stages of learning......-term alternative land use scenarios in cooperation with experts and modellers. The scenarios have been used in a formal outreach process with key clients and stakeholders at the European and Member State level afterwards. The aim of this paper is to document the methods used, analyse their strengths and weaknesses...... effectively trigger strategic conversations among policy-makers and key stakeholders about potential future developments and related response strategies. A weak integration with quantitative results can undermine this outcome, which is one of the ultimate objectives of any scenario exercise....

  7. The causal relationship of business innovation training and development, and job satisfaction of SME manufacturing in Palembang

    Directory of Open Access Journals (Sweden)

    Afriyadi Cahyadi

    2015-06-01

    Full Text Available The aim of this research is to explore causal relationship among business innova-tion, training and development, and job satisfaction of micro and small manufactur-ing enterprises managers in Palembang city South Sumatera. An explanatory study uses path analysis to explain quantitative data. Data were collected from 335 sample managers of the enterprises by distributing self-developed questionnaires. The method of considering quantity of sample is random sampling. The results show that innovations have an effect on training and development, and training and de-velopment has a significant effect on job satisfaction. On the other side, innovations have no effect on job satisfaction. Innovations include raw materials, production processes and products offered. Job satisfaction include feelings of pleasure and enjoy, feeling calm and not be concerned about, do not ignore the feelings of the faithful, and the feeling of belonging and defend jobs.

  8. Towards a framework for surveillance of distributors and development of food manufacturers' competencies

    DEFF Research Database (Denmark)

    Skytte, Hans

    Marketing has a long tradition for stressing the importance of staying close to your customers (Peters, 1982). How manufacturers can stay close to their cus-to-mers and create value for them has been widely researched in relation to end-users (Dic 1987) and to industrial customers (Narus, 1986......) but not so much in connection with distributors. This paper will discuss how food manufac-tu-rers can survey distributors, and in this connection especially food retailers. Firstly we will discuss the results from three preliminary studies and secondly we will discuss the research projects we intend to carry...

  9. Bio-inspired vision

    International Nuclear Information System (INIS)

    Posch, C

    2012-01-01

    Nature still outperforms the most powerful computers in routine functions involving perception, sensing and actuation like vision, audition, and motion control, and is, most strikingly, orders of magnitude more energy-efficient than its artificial competitors. The reasons for the superior performance of biological systems are subject to diverse investigations, but it is clear that the form of hardware and the style of computation in nervous systems are fundamentally different from what is used in artificial synchronous information processing systems. Very generally speaking, biological neural systems rely on a large number of relatively simple, slow and unreliable processing elements and obtain performance and robustness from a massively parallel principle of operation and a high level of redundancy where the failure of single elements usually does not induce any observable system performance degradation. In the late 1980's, Carver Mead demonstrated that silicon VLSI technology can be employed in implementing ''neuromorphic'' circuits that mimic neural functions and fabricating building blocks that work like their biological role models. Neuromorphic systems, as the biological systems they model, are adaptive, fault-tolerant and scalable, and process information using energy-efficient, asynchronous, event-driven methods. In this paper, some basics of neuromorphic electronic engineering and its impact on recent developments in optical sensing and artificial vision are presented. It is demonstrated that bio-inspired vision systems have the potential to outperform conventional, frame-based vision acquisition and processing systems in many application fields and to establish new benchmarks in terms of redundancy suppression/data compression, dynamic range, temporal resolution and power efficiency to realize advanced functionality like 3D vision, object tracking, motor control, visual feedback loops, etc. in real-time. It is argued that future artificial vision systems

  10. Development of Vision Based Multiview Gait Recognition System with MMUGait Database

    Directory of Open Access Journals (Sweden)

    Hu Ng

    2014-01-01

    Full Text Available This paper describes the acquisition setup and development of a new gait database, MMUGait. This database consists of 82 subjects walking under normal condition and 19 subjects walking with 11 covariate factors, which were captured under two views. This paper also proposes a multiview model-based gait recognition system with joint detection approach that performs well under different walking trajectories and covariate factors, which include self-occluded or external occluded silhouettes. In the proposed system, the process begins by enhancing the human silhouette to remove the artifacts. Next, the width and height of the body are obtained. Subsequently, the joint angular trajectories are determined once the body joints are automatically detected. Lastly, crotch height and step-size of the walking subject are determined. The extracted features are smoothened by Gaussian filter to eliminate the effect of outliers. The extracted features are normalized with linear scaling, which is followed by feature selection prior to the classification process. The classification experiments carried out on MMUGait database were benchmarked against the SOTON Small DB from University of Southampton. Results showed correct classification rate above 90% for all the databases. The proposed approach is found to outperform other approaches on SOTON Small DB in most cases.

  11. Intelligible seminar on fusion reactors. (12) Next step toward the realization of fusion reactors. Future vision of fusion energy research and development

    International Nuclear Information System (INIS)

    Okano, Kunihiko; Kurihara, Kenichi; Tobita, Kenji

    2006-01-01

    In the last session of this seminar the progress of research and development for the realization of fusion reactors and future vision of fusion energy research and development are summarized. The some problems to be solved when the commercial fusion reactors would be realized, (1) production of deuterium as the fuel, (2) why need the thermonuclear reactors, (3) environmental problems, and (4) ITER project, are described. (H. Mase)

  12. Manufacturing Initiative

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Manufacturing Technologies (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of...

  13. How does the European market of manufacturing plants develop?; Wie wird sich der europaeische Anlagenmarkt entwickeln?

    Energy Technology Data Exchange (ETDEWEB)

    Mederle, A. [Thoeni Industriebetriebe GmbH, Telfs (Austria)

    2007-07-01

    Within the scope of the 3rd symposium ''Processes and materials for energy technologies'', held between 20th and 21st June, 2007, at the ATZ Entwicklungszentrum in Sulzbach-Rosenberg (Federal Republic of Germany), the author reports on the development of the European market of manufacturing plants. The industrial plant constructors supply production plants in more than twenty industrial sectors such as chemical and pharmaceutical industry, textile industry or food processing industry. The industrial plant constructors have special qualities in project management, risk management, design of international contracts, management of supplier, logistics, After Sales Service, guarantee management as well as warranty management. The mechanical engineering and power plant engineering is one of the greatest industrial sector in the European Union. Nearly one tenth of the added value in the European Union is due to the mechanical engineering and power plant engineering. Nearly 24.500 companies are active in the mechanical engineering sector in the European Union. 2.6 million employees have an employment in this sector. They have produced machines and plants with an order value of 420 billion Euro in the year 2005. Two thirds of the production volume remain in the European Union. Only one third of the produced machines and plants are exported in countries outside of the European Union. The export volume amounts 146 billion Euro in the year 2005 and is greater than the export volume of the United States of America (70 billion Euro) and Japan (69 billion Euro). The Federal Republic of Germany is the leading country with respect to the local content of production (39 %) within the European Union followed by Italy (16 %), France (11 %), and Great Britain (9 %). Since the beginning of the nineties in the twentieth century, the conveying technology has developed to the greatest sector in the mechanical engineering. In this sector, the production volume amounts

  14. Predictive modeling of solidification during laser additive manufacturing of nickel superalloys: recent developments, future directions

    Science.gov (United States)

    Ghosh, Supriyo

    2018-01-01

    Additive manufacturing (AM) processes produce parts with improved physical, chemical, and mechanical properties compared to conventional manufacturing processes. In AM processes, intricate part geometries are produced from multicomponent alloy powder, in a layer-by-layer fashion with multipass laser melting, solidification, and solid-state phase transformations, in a shorter manufacturing time, with minimal surface finishing, and at a reasonable cost. However, there is an increasing need for post-processing of the manufactured parts via, for example, stress relieving heat treatment and hot isostatic pressing to achieve homogeneous microstructure and properties at all times. Solidification in an AM process controls the size, shape, and distribution of the grains, the growth morphology, the elemental segregation and precipitation, the subsequent solid-state phase changes, and ultimately the material properties. The critical issues in this process are linked with multiphysics (such as fluid flow and diffusion of heat and mass) and multiscale (lengths, times and temperature ranges) challenges that arise due to localized rapid heating and cooling during AM processing. The alloy chemistry-process-microstructure-property-performance correlation in this process will be increasingly better understood through multiscale modeling and simulation.

  15. Opportunities for development of local forest markets: the case of Amish furniture manufacturing

    Science.gov (United States)

    Matt Bumgardner; Gary Graham; Charles. Goebel

    2012-01-01

    A dramatic decline in the production of hardwood furniture in the United States has had profound impacts on employment and hardwood markets. Against this backdrop, the Amish-based furniture manufacturing cluster in Ohio has expanded and hardwood lumber consumption by the cluster is significant. Recent research suggests that 71 percent of firms in the cluster expanded...

  16. Primary Manufacturing Processes for Fiber Reinforced Composites: History, Development & Future Research Trends

    Science.gov (United States)

    Tapan Bhatt, Alpa; Gohil, Piyush P.; Chaudhary, Vijaykumar

    2018-03-01

    Composite Materials are becoming more popular gradually replacing traditional material with extra strength, lighter weight and superior property. The world is exploring use of fiber reinforced composites in all application which includes air, land and water transport, construction industry, toys, instrumentation, medicine and the list is endless. Based on application and reinforcement used, there are many ways to manufactures parts with fiber reinforced composites. In this paper various manufacturing processes have been discussed at length, to make fiber reinforced composites components. The authors have endeavored to include all the processes available recently in composite industry. Paper first highlights history of fiber reinforced composites manufacturing, and then the comparison of different manufacturing process to build composites have been discussed, to give clear understanding on, which process should be selected, based on reinforcement, matrix and application. All though, there are several advantages to use such fiber reinforcement composites, still industries have not grown at par and there is a lot of scope to improve these industries. At last, where India stands today, what are the challenges in market has been highlighted and future market and research trend of exploring such composite industries have been discussed. This work is carried out as a part of research project sanctioned by GUJCOST, Gandhinagar.

  17. Frontline Leaders: The Entry Point for Leadership Development in the Manufacturing Industry

    Science.gov (United States)

    Liu, Lucy; McMurray, Adela J.

    2004-01-01

    This multi-method case study examined the roles, functions, capabilities, job satisfaction, strengths, weaknesses and skill gaps of frontline team leaders working on the shopfloor in the Australian automobile industry. The study was conducted in a large automobile manufacturing company employing 4,500 employees and rated as one of the top 22…

  18. Nuclear fuel manufacture at PJSC NCCP. Technology development and quality assurance

    International Nuclear Information System (INIS)

    Goncharov, Yu.; Enin, A.; Kustov, L.; Mokshin, I.; Pluzhnikov, D.

    2015-01-01

    This report presents the PJSC NCCP fuel performance results and measures for improvement of FA and component manufacturing technique. Also it is demonstrated the process capacities, starting from UF6 procurement, its processing, and actual production of finished fuel assemblies as well as FA mounting and modifications of TVSA design

  19. 75 FR 33766 - Manufacturing Extension Partnership (MEP) Availability of Funds for Projects To Develop Client...

    Science.gov (United States)

    2010-06-15

    ... Strategic Growth Areas are: supply chain, sustainability, technology acceleration, workforce and continuous... strengthen the global competitiveness of small- and medium-sized U.S. based manufacturing firms. NIST MEP... Agreements Management Division; National Institute of Standards and Technology; 100 Bureau Drive, Stop 1650...

  20. The determinants of export performance in developing countries : the case of Indonesian manufacturing

    NARCIS (Netherlands)

    Dijk, van M.

    2002-01-01

    In this paper we analyse export behaviour of Indonesian companies using a unique database covering all manufacturing firms active in 1995. We test a range of determinants, pointed out by the literature, separately for 28 industries at the three-digit level. Furthermore, the Pavitt taxonomy is

  1. Manufactured Porous Ambient Surface Simulants

    Science.gov (United States)

    Carey, Elizabeth M.; Peters, Gregory H.; Chu, Lauren; Zhou, Yu Meng; Cohen, Brooklin; Panossian, Lara; Green, Jacklyn R.; Moreland, Scott; Backes, Paul

    2016-01-01

    The planetary science decadal survey for 2013-2022 (Vision and Voyages, NRC 2011) has promoted mission concepts for sample acquisition from small solar system bodies. Numerous comet-sampling tools are in development to meet this standard. Manufactured Porous Ambient Surface Simulants (MPASS) materials provide an opportunity to simulate variable features at ambient temperatures and pressures to appropriately test potential sample acquisition systems for comets, asteroids, and planetary surfaces. The original "flavor" of MPASS materials is known as Manufactured Porous Ambient Comet Simulants (MPACS), which was developed in parallel with the development of the Biblade Comet Sampling System (Backes et al., in review). The current suite of MPACS materials was developed through research of the physical and mechanical properties of comets from past comet missions results and modeling efforts, coordination with the science community at the Jet Propulsion Laboratory and testing of a wide range of materials and formulations. These simulants were required to represent the physical and mechanical properties of cometary nuclei, based on the current understanding of the science community. Working with cryogenic simulants can be tedious and costly; thus MPACS is a suite of ambient simulants that yields a brittle failure mode similar to that of cryogenic icy materials. Here we describe our suite of comet simulants known as MPACS that will be used to test and validate the Biblade Comet Sampling System (Backes et al., in review).

  2. Low Vision FAQs

    Science.gov (United States)

    ... de los Ojos Cómo hablarle a su oculista Low Vision FAQs What is low vision? Low vision is a visual impairment, not correctable ... person’s ability to perform everyday activities. What causes low vision? Low vision can result from a variety of ...

  3. Pediatric Low Vision

    Science.gov (United States)

    ... Asked Questions Español Condiciones Chinese Conditions Pediatric Low Vision What is Low Vision? Partial vision loss that cannot be corrected causes ... and play. What are the signs of Low Vision? Some signs of low vision include difficulty recognizing ...

  4. Additive Manufacturing Infrared Inspection

    Science.gov (United States)

    Gaddy, Darrell; Nettles, Mindy

    2015-01-01

    The Additive Manufacturing Infrared Inspection Task started the development of a real-time dimensional inspection technique and digital quality record for the additive manufacturing process using infrared camera imaging and processing techniques. This project will benefit additive manufacturing by providing real-time inspection of internal geometry that is not currently possible and reduce the time and cost of additive manufactured parts with automated real-time dimensional inspections which deletes post-production inspections.

  5. Next-generation leadership development in family businesses: the critical roles of shared vision and family climate.

    Science.gov (United States)

    Miller, Stephen P

    2014-01-01

    The multigenerational survival rate for family-owned businesses is not good. Lack of a shared vision for the family enterprise and weak next-generation leadership are often cited as two of the leading reasons for the failure of family firms to successfully transition from one generation of family ownership to the next. The climate of the business-owning family has also been suggested as important to the performance of the family enterprise. Despite these commonly held tenets, there is a lack of rigorous quantitative research that explores the relationships among these three factors. To address this gap, a quantitative study of 100 next-generation family firm leaders and 350 family and non-family leaders and employees with whom they work was conducted. The results demonstrate that a shared vision for the family business has a strong effect on the leadership effectiveness of next-generation family leaders and a moderate effect on the degree to which they are positively engaged with their work. The findings also show that two dimensions of family climate significantly influence the likelihood that a shared vision for the family firm has been created. Open communication in the family is positively related to the presence of a shared vision for the business. Intergenerational authority, which refers to a senior generation that exercises unquestioned authority and sets the rules, is negatively related to the presence of a shared vision. Surprisingly, a third dimension of family climate, cognitive cohesion, which includes shared values in the family, had no relationship with the degree to which there was a shared vision for the family business. The implications for family business owners is that they would be wise to spend as much time on fostering a positive family climate characterized by open communication as they do on creating and executing a successful business strategy if their goal is to pass the business from one generation of family owners to the next.

  6. Next-generation leadership development in family businesses: the critical roles of shared vision and family climate

    Science.gov (United States)

    Miller, Stephen P.

    2014-01-01

    The multigenerational survival rate for family-owned businesses is not good. Lack of a shared vision for the family enterprise and weak next-generation leadership are often cited as two of the leading reasons for the failure of family firms to successfully transition from one generation of family ownership to the next. The climate of the business-owning family has also been suggested as important to the performance of the family enterprise. Despite these commonly held tenets, there is a lack of rigorous quantitative research that explores the relationships among these three factors. To address this gap, a quantitative study of 100 next-generation family firm leaders and 350 family and non-family leaders and employees with whom they work was conducted. The results demonstrate that a shared vision for the family business has a strong effect on the leadership effectiveness of next-generation family leaders and a moderate effect on the degree to which they are positively engaged with their work. The findings also show that two dimensions of family climate significantly influence the likelihood that a shared vision for the family firm has been created. Open communication in the family is positively related to the presence of a shared vision for the business. Intergenerational authority, which refers to a senior generation that exercises unquestioned authority and sets the rules, is negatively related to the presence of a shared vision. Surprisingly, a third dimension of family climate, cognitive cohesion, which includes shared values in the family, had no relationship with the degree to which there was a shared vision for the family business. The implications for family business owners is that they would be wise to spend as much time on fostering a positive family climate characterized by open communication as they do on creating and executing a successful business strategy if their goal is to pass the business from one generation of family owners to the next. PMID

  7. Next-Generation Leadership Development in Family Businesses: The Critical Roles of Shared Vision and Family Climate

    Directory of Open Access Journals (Sweden)

    Stephen Phillip Miller

    2014-12-01

    Full Text Available The multigenerational survival rate for family-owned businesses is not good. Lack of a shared vision for the family enterprise and weak next-generation leadership are often cited as two of the leading reasons for the failure of family firms to successfully transition from one generation of family ownership to the next. The climate of the business-owning family has also been suggested as important to the performance of the family enterprise. Despite these commonly held tenets, there is a lack of rigorous quantitative research that explores the relationships among these three factors. To address this gap, a quantitative study of 100 next-generation family firm leaders and 350 family and non-family leaders and employees with whom they work was conducted. The results demonstrate that a shared vision for the family business has a strong effect on the leadership effectiveness of next-generation family leaders and a moderate effect on the degree to which they are positively engaged with their work. The findings also show that two dimensions of family climate significantly influence the likelihood that a shared vision for the family firm has been created. Open communication in the family is positively related to the presence of a shared vision for the business. Intergenerational authority, which refers to a senior generation that exercises unquestioned authority and sets the rules, is negatively related to the presence of a shared vision. Surprisingly, a third dimension of family climate, cognitive cohesion, which includes shared values in the family, had no relationship with the degree to which there was a shared vision for the family business. The implications for family business owners is that they would be wise to spend as much time on fostering a positive family climate characterized by open communication as they do on creating and executing a successful business strategy if their goal is to pass the business from one generation of family owners to

  8. Future CIS Manufacturing Technology Development: Final Report, 8 July 1998--17 October 2001

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, T. J.; Crisalle, O. D.; Li, S. S.; Holloway, P. H.

    2003-06-01

    The University of Florida served as the basis for educating 12 graduate students in the area of photovoltaics engineering and research with a focus on thin-film CIS manufacturing technologies. A critical assessment of the thermodynamic data and of the phase diagrams for the Cu-Se and In-Se binary systems were carried out. We investigated the use of two novel precursor structures that used stacked In-Se and Cu-Se binary layers instead of conventional elemental layers, followed by rapid thermal processing (RTP) to produce CIS films. We investigated the evolution of electrical and microstructural properties of sputter-deposited ZnO:Al thin films. An assessment of the thermodynamics of the pseudobinary Cu2Se-Ga2Se3 system was done by using available experimental data, as well as an empirical method for estimating interactions in semiconductor solid solutions. Optimization studies were conducted to characterize the RTP of binary bilayer precursors for CIS synthesis using a newly acquired AG Associates Heatpulse furnace. Progress was made on the calculation of the 500C isothermal section of the phase diagram of the ternary Cu-In-Se system. Pursuit of developing alternative buffer layers for Cd-free CIS-based solar cells using a chemical-bath deposition (CBD) process has resulted in specific recipes for deposition. A rigorous model has been derived to predict the metal mass fluxes produced by conical thermal effusion sources. A two-dimensional model of the heat transfer was developed to model the substrate temperature distribution in the UF PMEE Reactor that features a rotating platen/substrates and effusion sources. We have grown and characterized polycrystalline CIS epitaxial films on single-crystal GaAs substrates under conditions that enhance the influence of surface effects on the resulting films and their properties. Progress was made on the study of CIS and CGS single-crystal growth, along with accompanying morphological and compositional characterizations. We have

  9. Electronic manufacturing and packaging in Japan

    Science.gov (United States)

    Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John A.; Meieran, Eugene S.; Pecht, Michael; Peeples, John W.; Tummala, Rao R.

    1995-01-01

    This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies. Japan has established this marked competitive advantage in electronics as a consequence of developing low-cost, high-volume consumer products. Japan's infrastructure, and the remarkable cohesiveness of vision and purpose in government and industry, are key factors in the success of Japan's electronics industry. Although Japan will continue to dominate consumer electronics in the foreseeable future, opportunities exist for the United States and other industrial countries to capture an increasingly large part of the market. The JTEC panel has identified no insurmountable barriers that would prevent the United States from regaining a significant share of the consumer electronics market; in fact, there is ample evidence that the United States needs to aggressively pursue high-volume, low-cost electronic assembly, because it is a critical path leading to high-performance electronic systems.

  10. Intellectual property rights and challenges for development of affordable human papillomavirus, rotavirus and pneumococcal vaccines: Patent landscaping and perspectives of developing country vaccine manufacturers.

    Science.gov (United States)

    Chandrasekharan, Subhashini; Amin, Tahir; Kim, Joyce; Furrer, Eliane; Matterson, Anna-Carin; Schwalbe, Nina; Nguyen, Aurélia

    2015-11-17

    The success of Gavi, the Vaccine Alliance depends on the vaccine markets providing appropriate, affordable vaccines at sufficient and reliable quantities. Gavi's current supplier base for new and underutilized vaccines, such as the human papillomavirus (HPV), rotavirus, and the pneumococcal conjugate vaccine is very small. There is growing concern that following globalization of laws on intellectual property rights (IPRs) through trade agreements, IPRs are impeding new manufacturers from entering the market with competing vaccines. This article examines the extent to which IPRs, specifically patents, can create such obstacles, in particular for developing country vaccine manufacturers (DCVMs). Through building patent landscapes in Brazil, China, and India and interviews with manufacturers and experts in the field, we found intense patenting activity for the HPV and pneumococcal vaccines that could potentially delay the entry of new manufacturers. Increased transparency around patenting of vaccine technologies, stricter patentability criteria suited for local development needs and strengthening of IPRs management capabilities where relevant, may help reduce impediments to market entry for new manufacturers and ensure a competitive supplier base for quality vaccines at sustainably low prices. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  11. A lifeline to treatment: the role of Indian generic manufacturers in supplying antiretroviral medicines to developing countries.

    Science.gov (United States)

    Waning, Brenda; Diedrichsen, Ellen; Moon, Suerie

    2010-09-14

    Indian manufacturers of generic antiretroviral (ARV) medicines facilitated the rapid scale up of HIV/AIDS treatment in developing countries though provision of low-priced, quality-assured medicines. The legal framework in India that facilitated such production, however, is changing with implementation of the World Trade Organization Agreement on Trade-Related Aspects of Intellectual Property Rights, and intellectual property measures being discussed in regional and bilateral free trade agreement negotiations. Reliable quantitative estimates of the Indian role in generic global ARV supply are needed to understand potential impacts of such measures on HIV/AIDS treatment in developing countries. We utilized transactional data containing 17,646 donor-funded purchases of ARV tablets made by 115 low- and middle-income countries from 2003 to 2008 to measure market share, purchase trends and prices of Indian-produced generic ARVs compared with those of non-Indian generic and brand ARVs. Indian generic manufacturers dominate the ARV market, accounting for more than 80% of annual purchase volumes. Among paediatric ARV and adult nucleoside and non-nucleoside reverse transcriptase inhibitor markets, Indian-produced generics accounted for 91% and 89% of 2008 global purchase volumes, respectively. From 2003 to 2008, the number of Indian generic manufactures supplying ARVs increased from four to 10 while the number of Indian-manufactured generic products increased from 14 to 53. Ninety-six of 100 countries purchased Indian generic ARVs in 2008, including high HIV-burden sub-Saharan African countries. Indian-produced generic ARVs used in first-line regimens were consistently and considerably less expensive than non-Indian generic and innovator ARVs. Key ARVs newly recommended by the World Health Organization are three to four times more expensive than older regimens. Indian generic producers supply the majority of ARVs in developing countries. Future scale up using newly

  12. Developing Tele-Operated Laboratories for Manufacturing Engineering Education. Platform for E-Learning and Telemetric Experimentation (PeTEX

    Directory of Open Access Journals (Sweden)

    A. Erman Tekkaya

    2010-09-01

    Full Text Available The aim of the PeTEX-project is to establish an e-Learning platform for the development, implementation, and delivery of educational training programs in the field of manufacturing engineering. The PeTEX team designs both: a technical platform for eLearning based on “Moodle” including distributed tele-operated experimentation facilities, and didactic and socio-technical requirements for a successful online learning community. User interfaces are deployed for remote access to instruments, data analysis and multiplexed data access via network protocols. Hence, the platform provides complex tools in order to perform various activities to support the educational process, from telemetric experimentation to virtual project groups for an entire community to the purpose of domain specific learning. This paper describes important steps of interdisciplinary participatory design and development of a remote lab-prototype in the field of manufacturing engineering.

  13. CARRYING CAPACITY MODEL OF FOOD MANUFACTURING SECTORS FOR SUSTAINABLE DEVELOPMENT FROM USING ENVIRONMENTAL AND NATURAL RESOURCES OF THAILAND

    Directory of Open Access Journals (Sweden)

    Pruethsan Sutthichaimethee

    2015-11-01

    Full Text Available The objective of this research is to propose an indicator to assess and rank environmental problems caused by production within the food manufacturing sector of Thailand. The factors used to calculate the real benefit included the costs of natural resources, energy and transportation, fertilizer and pesticides, and sanitary and similar service. The highest environmental cost in terms of both natural resources materials and energy and transportation was ice, while the highest environmental cost for fertilizer and pesticides was coconut and palm oil. Confectionery had the highest environmental cost for sanitary and similar services. Overall, real estate gained the highest real benefit, while repair not classified elsewhere had the lowest real benefit for the company. If Thailand uses an indicator of environmental harm, especially within the food manufacturing sector, it could help to formulate efficient policies and strategies for the country in three areas of development, which are social, economic, and environmental development.

  14. Robot vision

    International Nuclear Information System (INIS)

    Hall, E.L.

    1984-01-01

    Almost all industrial robots use internal sensors such as shaft encoders which measure rotary position, or tachometers which measure velocity, to control their motions. Most controllers also provide interface capabilities so that signals from conveyors, machine tools, and the robot itself may be used to accomplish a task. However, advanced external sensors, such as visual sensors, can provide a much greater degree of adaptability for robot control as well as add automatic inspection capabilities to the industrial robot. Visual and other sensors are now being used in fundamental operations such as material processing with immediate inspection, material handling with adaption, arc welding, and complex assembly tasks. A new industry of robot vision has emerged. The application of these systems is an area of great potential

  15. Developing a Framework for E-Manufacturing Based on Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Xu Xi

    2013-06-01

    Full Text Available This paper analyzes the current situation of business environment and business intelligence systems integration at first. With emerging applications of internet and wireless communication technologies, e-manufacturing is focused on the use of internet, monitoring and communications technologies to make things happen collaboratively on a global basis. A wireless sensor network based data acquisition system gives enormous benefits such as ease and flexibility of deployment in addition to low maintenance and deployment costs. This paper reviews wireless sensor network and its application for e-manufacturing. To provide a dependable, non-intrusive, secure, real-time automated health monitoring, a distributed reconfigurable sensor network is introduced which consists of real and virtual sensor nodes over a communication wireless sensor network using Mica2 motes.

  16. Development of a method to manufacture uncured, no-nitrate/nitrite-added whole muscle jerky.

    Science.gov (United States)

    Sindelar, Jeffrey J; Terns, Matthew J; Meyn, Elizabeth; Boles, Jane A

    2010-10-01

    "Natural curing" is accomplished by use of vegetable juice/powder high in naturally occurring nitrates combined with a nitrate reducing starter culture to result in indirectly "cured" products. Since the starter culture used is not water soluble, making "naturally cured" whole muscle jerky with current manufacturing techniques has been found ineffective. The objective was to investigate processes for whole muscle beef jerky that might provide cured meat characteristics similar to those of a nitrite-added control. Treatments where jerky was placed in a barrier bag during incubation were found to be the least similar to the nitrite-added control. Jerky placed in a 40.6 degrees C smokehouse during incubation resulted in significantly more (Pprocessing methods investigated to manufacture "naturally cured" whole muscle jerky in this study were ineffective in resulting in products similar to those cured with sodium nitrite. Published by Elsevier Ltd.

  17. Sectorial and regional determinants of firm dynamics in developing countries: evidence for low, medium and high tech manufacturing in Argentina

    OpenAIRE

    Calá, Carla Daniela

    2018-01-01

    We analyse the determinants of firm dynamics in developing countries using Argentina as an illustrative case. We explain firm entry and exit at the regional level, distinguishing three groups of manufacturing activities: low, medium and high tech. We find that both region -and sector- specific determinants explain firm dynamics, but the impact is not homogeneous across sectors. In particular, for low tech industries, there is a need for explanatory variables that proxy for the specificities o...

  18. Development of a PVD-based manufacturing process of monolithic LEU irradiation targets for {sup 99}Mo production

    Energy Technology Data Exchange (ETDEWEB)

    Hollmer, Tobias

    2015-08-03

    {sup 99}Mo is the most important radioisotope in nuclear medicine. It is produced by fission of uranium in irradiation targets. The usage of cylindrical monolithic targets can ensure a safe supply of {sup 99}Mo and at the same reduce the amount of highly radioactive waste generated during production. To manufacture these targets, a novel PVD-based technique was developed. Both the feasibility and the high efficiency of this process were demonstrated in a prototype apparatus.

  19. Development of food safety capability in Ghana to enhance access to the Global Food Manufacturing Value Chain (GFMVC)

    OpenAIRE

    Mensah, L. D.

    2011-01-01

    Demonstrating compliance with food safety requirements of the global economy is a prerequisite for access. As tariff barriers diminish, developing countries are exposed to greater opportunities for repositioning their food manufacturing sectors in global value chains (GVCs). At the same time, the measures for the protection of public health and safety are becoming more stringent because of the series of food safety crises that characterised the global food value chain in the 19...

  20. Development in the manufacture of fuel assembly components at Nuclear Fuel Complex

    International Nuclear Information System (INIS)

    Saibaba, N.

    2012-01-01

    The integrity of the fuel bundle and pellet-clad mechanical and chemical interaction (PCMCI) is the major limiting factor in achieving high burn up in thermal as well as fast reactors. Zircaloy based fuel bundle used for Indian pressurized heavy water reactor consists of number of components such as fuel clad tube, end cap bearing pad and spacer pad. These tubular, bar and sheet components are manufactured at Nuclear Fuel Complex using a series of thermomechanical processes involving hot and cold working with intermediate heat treatment. This paper is aimed at bringing out recent advances in NFC in the manufacture of fuel assembly components. Zircaloy based double clad tube adopting co-extrusion route followed by cold pilgering was successfully produced for its potential usage for high burnup in advance thermal reactors such as Advanced Heavy Water Reactors, This paper also includes process modifications carried out in the manufacture of clad tube and end cap components based on in-depth metallurgical studies. A radial forging process was established for primary breakdown of arc melted ingot which allows for better soundness and homogeneous microstructure. Manufacturing route of bar components for end caps was suitably modified by adopting only barrel straightening to minimize the residual stress and thereby increasing the recovery appreciably. NFC also supplies clad tube for fast breeder reactors where limiting factor for burn up are void swelling and fuel-clad interaction. In view of this, advance claddings such as P/M based 9Cr - Oxide Dispersion strengthened (ODS) steel clad and Zirconium lined T91 (9Cr-1 Mo) steel double clad have been successfully produced. Zirconium lined T91 (9Cr-1 Mo) double clad tubes required was successfully produced by adopting the method of co-pilgering, as a candidate material for clad tubes of Fast Breeder Reactors. (author)