Forest insect pest management and forest management in China: an overview.

Science.gov (United States)

Ji, Lanzhu; Wang, Zhen; Wang, Xiaowei; An, Linli

2011-12-01

According to the Seventh National Forest Inventory (2004-2008), China's forests cover an area of 195.45 million ha, or 20.36% of the total land area. China has the most rapidly increasing forest resources in the world. However, China is also a country with serious forest pest problems. There are more than 8,000 species of potential forest pests in China, including insects, plant diseases, rodents and lagomorphs, and hazardous plants. Among them, 300 species are considered as economically or ecologically important, and half of these are serious pests, including 86 species of insects. Forest management and utilization have a considerable influence on the stability and sustainability of forest ecosystems. At the national level, forestry policies always play a major role in forest resource management and forest health protection. In this paper, we present a comprehensive overview of both achievements and challenges in forest management and insect pest control in China. First, we summarize the current status of forest resources and their pests in China. Second, we address the theories, policies, practices and major national actions on forestry and forest insect pest management, including the Engineering Pest Management of China, the National Key Forestry Programs, the Classified Forest Management system, and the Collective Forest Tenure Reform. We analyze and discuss three representative plantations-Eucalyptus, poplar and Masson pine plantations-with respect to their insect diversity, pest problems and pest management measures.

Forest Insect Pest Management and Forest Management in China: An Overview

Science.gov (United States)

Ji, Lanzhu; Wang, Zhen; Wang, Xiaowei; An, Linli

2011-12-01

According to the Seventh National Forest Inventory (2004-2008), China's forests cover an area of 195.45 million ha, or 20.36% of the total land area. China has the most rapidly increasing forest resources in the world. However, China is also a country with serious forest pest problems. There are more than 8,000 species of potential forest pests in China, including insects, plant diseases, rodents and lagomorphs, and hazardous plants. Among them, 300 species are considered as economically or ecologically important, and half of these are serious pests, including 86 species of insects. Forest management and utilization have a considerable influence on the stability and sustainability of forest ecosystems. At the national level, forestry policies always play a major role in forest resource management and forest health protection. In this paper, we present a comprehensive overview of both achievements and challenges in forest management and insect pest control in China. First, we summarize the current status of forest resources and their pests in China. Second, we address the theories, policies, practices and major national actions on forestry and forest insect pest management, including the Engineering Pest Management of China, the National Key Forestry Programs, the Classified Forest Management system, and the Collective Forest Tenure Reform. We analyze and discuss three representative plantations— Eucalyptus, poplar and Masson pine plantations—with respect to their insect diversity, pest problems and pest management measures.

Descriptions of Transit Maintenance Management Information Systems

Science.gov (United States)

1984-10-01

This 289-page report presents an overview of ten maintenance management information systems that are currently operational or near-operational on minicomputers or microcomputers. The systems described address one or more of the following concerns: co...

Integration of project management and systems engineering: Tools for a total-cycle environmental management system

International Nuclear Information System (INIS)

Blacker, P.B.; Winston, R.

1997-01-01

An expedited environmental management process has been developed at the Idaho National Engineering and Environmental Laboratory (INEEL). This process is one result of the Lockheed Martin commitment to the US Department of Energy to incorporate proven systems engineering practices with project management and program controls practices at the INEEL. Lockheed Martin uses a graded approach of its management, operations, and systems activities to tailor the level of control to the needs of the individual projects. The Lockheed Martin definition of systems engineering is: ''''Systems Engineering is a proven discipline that defines and manages program requirements, controls risk, ensures program efficiency, supports informed decision making, and verifies that products and services meet customer needs.'''' This paper discusses: the need for an expedited environmental management process; how the system was developed; what the system is; what the system does; and an overview of key components of the process

Characterization analysis database system (CADS). A system overview

International Nuclear Information System (INIS)

1997-12-01

The CADS database is a standardized, quality-assured, and configuration-controlled data management system developed to assist in the task of characterizing the DOE surplus HEU material. Characterization of the surplus HEU inventory includes identifying the specific material; gathering existing data about the inventory; defining the processing steps that may be necessary to prepare the material for transfer to a blending site; and, ultimately, developing a range of the preliminary cost estimates for those processing steps. Characterization focuses on producing commercial reactor fuel as the final step in material disposition. Based on the project analysis results, the final determination will be made as to the viability of the disposition path for each particular item of HEU. The purpose of this document is to provide an informational overview of the CADS database, its evolution, and its current capabilities. This document describes the purpose of CADS, the system requirements it fulfills, the database structure, and the operational guidelines of the system

ARGOS-NT: A computer based emergency management system

International Nuclear Information System (INIS)

Hoe, S.; Thykier-Nielsen, S.; Steffensen, L.B.

2000-01-01

In case of a nuclear accident or a threat of a release the Danish Emergency Management Agency is responsible for actions to minimize the consequences in Danish territory. To provide an overview of the situation, a computer based system called ARGOS-NT has been developed in 1993/94. This paper gives an overview of the system with emphasis on the prognostic part of the system. An example calculation shows the importance of correct landscape modeling. (author)

Managing nuclear wastes: an overview of the issues

International Nuclear Information System (INIS)

Cummings, R.G.; Utton, A.E.

1981-01-01

The issues involving nuclear waste management are reviewed. The author points out the need for a critical overview of research priorities concerning nuclear waste management (NWM), and he discusses the uncertainties surrounding the scope of the problem (i.e., the controversy concerning the extent of dangers to public health and safety associated with the transport and storage of nuclear wastes). This article, intended as a introdution to the other nuclear waste management papers in the journal, also briefly discusses the papers

Nuclear knowledge management overview at EDF

International Nuclear Information System (INIS)

Ballay, J.; Vannieuwenhuyse, J.; Nups, A.

2004-01-01

This paper gives an overview of knowledge management practices within the French nuclear generation park. The study was initially partnered by one of the 19 Nuclear Power-plants, located at Golfech near Toulouse, and then extended to a more general overview. Golfech is a 650 people unit, from which 25 of them were interviewed to carry out the study. This staff was made of managers, experts, seniors and juniors, all of them being working at Golfech in the different skills for nuclear generation needs: driving, engineering, maintenance, safety, environment, etc. They were questioned about their practices, tools and organisations concerning creating, sharing, transferring, and renewing knowledge. A general knowledge management model was derived from this study. It shows that the professional knowledge, in any industrial sector, is the result of four learning processes: an education-oriented process, a codified and normative learning process, a context-based collective learning process and an experience-based individual learning process. These learning processes inter-operate through any kind of activity, and they induce four knowledge structures: the basic knowledge, the technical knowledge, the know-how and the experiential knowledge. In conclusion, the model explains how the firm learns and, in the same time, how everybody as a single individual learns. It is a crucial point to understand how the knowledge-based economy runs, as a constant interconnection between two opposite but complementary forces: the collective and the individual ones. (author)

Overview on spent fuel management strategies

International Nuclear Information System (INIS)

Dyck, P.

2002-01-01

This paper presents an overview on spent fuel management strategies which range from reprocessing to interim storage in a centralised facility followed by final disposal in a repository. In either case, more spent fuel storage capacity (wet or dry, at-reactor or away-from-reactor, national or regional) is required as spent fuel is continuously accumulated while most countries prefer to defer their decision to choose between these two strategies. (author)

US PWR steam generator management: An overview

International Nuclear Information System (INIS)

Welty, C.S. Jr.

1997-01-01

This paper provides an overview on the status of steam generator management activities in US PWRs, and includes: (1) an overview of the impact of steam generator problems; (2) a brief discussion of historical damage trends and the current damage mechanism of most concern; (3) a discussion of the elements of open-quotes steam generator managementclose quotes; and (4) a description of the approach being followed to implement a degradation-specific protocol for tubing inspection and repair. This paper was prepared in conjunction with another paper presented during the Plenary Session of this Conference, open-quotes Steam Generator Degradation: Current Mitigation Strategies for Controlling Corrosionclose quotes, and is provided as a supplement to that material

An overview of food waste management in developing countries: Current status and future perspective.

Science.gov (United States)

Thi, Ngoc Bao Dung; Kumar, Gopalakrishnan; Lin, Chiu-Yue

2015-07-01

Food waste (FW) related issues in developing countries is currently considered to be a major threatening factor for sustainable development and FW management systems. Due to incomplete FW management systems, many developing countries are facing challenges, such as environmental and sanitary problems that are caused by FW. The difference in FW generation trends between developing countries and developed countries was reviewed in this work, which demonstrated that the effects of income level, population growth, and public participation in FW management are very important. Thus, this work aimed to provide an overview of recycling activities, related regulations, and current FW treatment technology in developing countries by following some case studies. Taiwan, has been suggested as being a successful case in terms of FW management, and is therefore a typical model for developing countries to follow. Finally, an integrative management system as a suitable model for FW management has been suggested for developing countries. Copyright © 2015 Elsevier Ltd. All rights reserved.

An Overview of Modeling Approaches Applied to Aggregation-Based Fleet Management and Integration of Plug-in Electric Vehicles †

DEFF Research Database (Denmark)

You, Shi; Hu, Junjie; Ziras, Charalampos

2016-01-01

The design and implementation of management policies for plug-in electric vehicles (PEVs) need to be supported by a holistic understanding of the functional processes, their complex interactions, and their response to various changes. Models developed to represent different functional processes...... and systems are seen as useful tools to support the related studies for different stakeholders in a tangible way. This paper presents an overview of modeling approaches applied to support aggregation-based management and integration of PEVs from the perspective of fleet operators and grid operators......, respectively. We start by explaining a structured modeling approach, i.e., a flexible combination of process models and system models, applied to different management and integration studies. A state-of-the-art overview of modeling approaches applied to represent several key processes, such as charging...

Philosophy and overview of the INEL waste management program

International Nuclear Information System (INIS)

Gertz, C.P.; Whitsett, J.B.; Hamric, J.P.

1986-01-01

The INEL philosophy of ''get the job done; do it right--the first time'' is described as it applies to all phases of waste management activities. In addition, an overview of INEL's waste management programs and projects--low-level waste management operations and technology development; transuranic waste management operations and technology development; high-level waste management operations and technology development; spent fuel storage operations and equipment/technology development; transportation operations, technology development, and prototype cask procurements--are discussed. Emphasis is placed on the application of the INEL philosophy to the successful initiation and continuation of INEL waste management activities

An overview of decision tree applied to power systems

DEFF Research Database (Denmark)

Liu, Leo; Rather, Zakir Hussain; Chen, Zhe

2013-01-01

The corrosive volume of available data in electric power systems motivate the adoption of data mining techniques in the emerging field of power system data analytics. The mainstream of data mining algorithm applied to power system, Decision Tree (DT), also named as Classification And Regression...... Tree (CART), has gained increasing interests because of its high performance in terms of computational efficiency, uncertainty manageability, and interpretability. This paper presents an overview of a variety of DT applications to power systems for better interfacing of power systems with data...... analytics. The fundamental knowledge of CART algorithm is also introduced which is then followed by examples of both classification tree and regression tree with the help of case study for security assessment of Danish power system....

Managing organizational culture within a management system

International Nuclear Information System (INIS)

Comeau, L.; Watts, G.

2009-01-01

The Point Lepreau Generating Station (PLGS) is currently undergoing a major refurbishment of its nuclear reactor. At the same time, a small team is designing the organization that will operate the plant after refurbishment. This paper offers a high level overview of the Post-Refurbishment Organization (PRO) project and will focus primarily on the approach used to address organizational culture and human system dynamics. We will describe how various tools, used to assess organization culture, team performance, and individual self-understanding, are used collectively to place the right person in the right position. We will explain how the career system, Pathfinder, is used to integrate these tools to support a comprehensive model for organization design and development. Finally, we demonstrate how the management of organizational cultural and human system dynamics are integrated into the PLGS Integrated Management System. (author)

Diablo Canyon plant information management system and integrated communication system

International Nuclear Information System (INIS)

Stanley, J.W.; Groff, C.

1990-01-01

The implementation of a comprehensive maintenance system called the plant information management system (PIMS) at the Diablo Canyon plant, together with its associated integrated communication system (ICS), is widely regarded as the most comprehensive undertaking of its kind in the nuclear industry. This paper provides an overview of the program at Diablo Canyon, an evaluation of system benefits, and highlights the future course of PIMS

Diablo Canyon plant information management system and integrated communication system

Energy Technology Data Exchange (ETDEWEB)

Stanley, J.W.; Groff, C.

1990-06-01

The implementation of a comprehensive maintenance system called the plant information management system (PIMS) at the Diablo Canyon plant, together with its associated integrated communication system (ICS), is widely regarded as the most comprehensive undertaking of its kind in the nuclear industry. This paper provides an overview of the program at Diablo Canyon, an evaluation of system benefits, and highlights the future course of PIMS.

Exploration Medical System Trade Study Tools Overview

Science.gov (United States)

Mindock, J.; Myers, J.; Latorella, K.; Cerro, J.; Hanson, A.; Hailey, M.; Middour, C.

2018-01-01

ExMC is creating an ecosystem of tools to enable well-informed medical system trade studies. The suite of tools address important system implementation aspects of the space medical capabilities trade space and are being built using knowledge from the medical community regarding the unique aspects of space flight. Two integrating models, a systems engineering model and a medical risk analysis model, tie the tools together to produce an integrated assessment of the medical system and its ability to achieve medical system target requirements. This presentation will provide an overview of the various tools that are a part of the tool ecosystem. Initially, the presentation's focus will address the tools that supply the foundational information to the ecosystem. Specifically, the talk will describe how information that describes how medicine will be practiced is captured and categorized for efficient utilization in the tool suite. For example, the talk will include capturing what conditions will be planned for in-mission treatment, planned medical activities (e.g., periodic physical exam), required medical capabilities (e.g., provide imaging), and options to implement the capabilities (e.g., an ultrasound device). Database storage and configuration management will also be discussed. The presentation will include an overview of how these information tools will be tied to parameters in a Systems Modeling Language (SysML) model, allowing traceability to system behavioral, structural, and requirements content. The discussion will also describe an HRP-led enhanced risk assessment model developed to provide quantitative insight into each capability's contribution to mission success. Key outputs from these various tools, to be shared with the space medical and exploration mission development communities, will be assessments of medical system implementation option satisfaction of requirements and per-capability contributions toward achieving requirements.

Overview on Environmental Comprehensive Management System Established in Imitation of Biome

Institute of Scientific and Technical Information of China (English)

李如燕; 孙可伟

2004-01-01

Environmental comprehensive management system, called "the bionic community", can be established in imitation of biome, which can transform the wastes generated in a certain field into the raw materials of other field. The establishment of the bionic community includes two aspects, i.e. , the matching technique and the management system. The main matching technique is the preparation of composite materials made of various wastes.This new kind of material can be divided into four types: polymer matrix, silicate matrix, metal matrix and carbon matrix (or ceramic matrix). The environmental comprehensive management system is formed by organizing a transtrades joint-management business entity with the products of composite material made of wastes at the core.

Decommissioning and radioactive waste management. The European Commission overview

International Nuclear Information System (INIS)

Rehak, M

2010-01-01

In this lecture author deals with the European Commission overview on the decommissioning and radioactive waste management. Financial support of European Commission of decommissioning of the Ignalina NPP, Bohunice V1 NPP and Kozloduy Units 1 and 2 is presented.

Quantifying greenhouse gas sources and sinks in managed wetland systems

Science.gov (United States)

Stephen M Ogle; Patrick Hunt; Carl Trettin

2014-01-01

This chapter provides methodologies and guidance for reporting greenhouse gas (GHG) emissions and sinks at the entity scale for managed wetland systems. More specifically, it focuses on methods for managed palustrine wetlands.1 Section 4.1 provides an overview of wetland systems and resulting GHG emissions, system boundaries and temporal scale, a summary of the...

Food safety and quality management in Kenya: An overview of the ...

African Journals Online (AJOL)

Food safety and quality management in Kenya: An overview of the roles ... of the enormous informal sector in the food industry accounting for at least 80% of the ... management in the food supply chain has cost implications and income is a ...

Management of thoracolumbar spine trauma An overview

Directory of Open Access Journals (Sweden)

S Rajasekaran

2015-01-01

Full Text Available Thoracolumbar spine fractures are common injuries that can result in significant disability, deformity and neurological deficit. Controversies exist regarding the appropriate radiological investigations, the indications for surgical management and the timing, approach and type of surgery. This review provides an overview of the epidemiology, biomechanical principles, radiological and clinical evaluation, classification and management principles. Literature review of all relevant articles published in PubMed covering thoracolumbar spine fractures with or without neurologic deficit was performed. The search terms used were thoracolumbar, thoracic, lumbar, fracture, trauma and management. All relevant articles and abstracts covering thoracolumbar spine fractures with and without neurologic deficit were reviewed. Biomechanically the thoracolumbar spine is predisposed to a higher incidence of spinal injuries. Computed tomography provides adequate bony detail for assessing spinal stability while magnetic resonance imaging shows injuries to soft tissues (posterior ligamentous complex [PLC] and neurological structures. Different classification systems exist and the most recent is the AO spine knowledge forum classification of thoracolumbar trauma. Treatment includes both nonoperative and operative methods and selected based on the degree of bony injury, neurological involvement, presence of associated injuries and the integrity of the PLC. Significant advances in imaging have helped in the better understanding of thoracolumbar fractures, including information on canal morphology and injury to soft tissue structures. The ideal classification that is simple, comprehensive and guides management is still elusive. Involvement of three columns, progressive neurological deficit, significant kyphosis and canal compromise with neurological deficit are accepted indications for surgical stabilization through anterior, posterior or combined approaches.

Practical applications approach to design, development and implementation of an integrated management system

International Nuclear Information System (INIS)

Holdsworth, Rodger

2003-01-01

The introduction of quality, risk, safety, health and environmental management philosophies has significantly changed industry's view of company organization and controlling processes. Quality, risk, safety, health and environmental programs and systems, such as ISO 9000, ISO 14000, process safety, and risk management are impacting the way industry will meet the challenges of safety and environmental risks and the needs of the customer in the future. A wealth of knowledge has been extracted from practical application case studies, which would otherwise be unobtainable without years of experience related to management systems design, development, implementation and control. This paper discusses a practical applications approach to design, develop and implement an integrated management system encompassing quality (ISO 9000), process safety management (CFR 29 1910.119), risk management programs (CFR 40 part 68), environmental management (ISO 14000), and safety and health. This paper includes a discussion of management systems integration and an overview of management systems standards that apply to the petrochemical and chemical manufacturers industries. The paper also provides an overview on integrating management systems, including issues related to the following topics: - Establishing a management system team and objectives. - Assessing and knowing your organization. - Designing the management system to meet site objectives. - Developing system documentation. - Implementing effective management systems. - Measuring program performance. - Continuous improvement

An Overview of Modeling Approaches Applied to Aggregation-Based Fleet Management and Integration of Plug-in Electric Vehicles †

Directory of Open Access Journals (Sweden)

Shi You

2016-11-01

Full Text Available The design and implementation of management policies for plug-in electric vehicles (PEVs need to be supported by a holistic understanding of the functional processes, their complex interactions, and their response to various changes. Models developed to represent different functional processes and systems are seen as useful tools to support the related studies for different stakeholders in a tangible way. This paper presents an overview of modeling approaches applied to support aggregation-based management and integration of PEVs from the perspective of fleet operators and grid operators, respectively. We start by explaining a structured modeling approach, i.e., a flexible combination of process models and system models, applied to different management and integration studies. A state-of-the-art overview of modeling approaches applied to represent several key processes, such as charging management, and key systems, such as the PEV fleet, is then presented, along with a detailed description of different approaches. Finally, we discuss several considerations that need to be well understood during the modeling process in order to assist modelers and model users in the appropriate decisions of using existing, or developing their own, solutions for further applications.

Overview of HVAC system simulation

NARCIS (Netherlands)

Trcka, M.; Hensen, J.L.M.

2010-01-01

The paper gives an overview of heating, ventilation and air-conditioning (HVAC) system modeling and simulation. The categorization of tools for HVAC system design and analysis with respect to which problems they are meant to deal with is introduced. Each categorization is explained and example tools

NASA's Radioisotope Power Systems Program Overview - A Focus on RPS Users

Science.gov (United States)

Hamley, John A.; McCallum, Peter W.; Sandifer, Carl E., II; Sutliff, Thomas J.; Zakrajsek, June F.

2016-01-01

The goal of NASA's Radioisotope Power Systems (RPS) Program is to make RPS ready and available to support the exploration of the solar system in environments where the use of conventional solar or chemical power generation is impractical or impossible to meet potential future mission needs. To meet this goal, the RPS Program manages investments in RPS technologies and RPS system development, working closely with the Department of Energy. This paper provides an overview of the RPS Program content and status, its collaborations with potential RPS users, and the approach employed to maintain the readiness of RPS to support future NASA mission concepts.

Electronic waste management approaches: an overview.

Science.gov (United States)

Kiddee, Peeranart; Naidu, Ravi; Wong, Ming H

2013-05-01

Electronic waste (e-waste) is one of the fastest-growing pollution problems worldwide given the presence if a variety of toxic substances which can contaminate the environment and threaten human health, if disposal protocols are not meticulously managed. This paper presents an overview of toxic substances present in e-waste, their potential environmental and human health impacts together with management strategies currently being used in certain countries. Several tools including life cycle assessment (LCA), material flow analysis (MFA), multi criteria analysis (MCA) and extended producer responsibility (EPR) have been developed to manage e-wastes especially in developed countries. The key to success in terms of e-waste management is to develop eco-design devices, properly collect e-waste, recover and recycle material by safe methods, dispose of e-waste by suitable techniques, forbid the transfer of used electronic devices to developing countries, and raise awareness of the impact of e-waste. No single tool is adequate but together they can complement each other to solve this issue. A national scheme such as EPR is a good policy in solving the growing e-waste problems. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Y-12 Integrated Materials Management System

Energy Technology Data Exchange (ETDEWEB)

Alspaugh, D. H.; Hickerson, T. W.

2002-06-03

The Integrated Materials Management System, when fully implemented, will provide the Y-12 National Security Complex with advanced inventory information and analysis capabilities and enable effective assessment, forecasting and management of nuclear materials, critical non-nuclear materials, and certified supplies. These capabilities will facilitate future Y-12 stockpile management work, enhance interfaces to existing National Nuclear Security Administration (NNSA) corporate-level information systems, and enable interfaces to planned NNSA systems. In the current national nuclear defense environment where, for example, weapons testing is not permitted, material managers need better, faster, more complete information about material properties and characteristics. They now must manage non-special nuclear material at the same high-level they have managed SNM, and information capabilities about both must be improved. The full automation and integration of business activities related to nuclear and non-nuclear materials that will be put into effect by the Integrated Materials Management System (IMMS) will significantly improve and streamline the process of providing vital information to Y-12 and NNSA managers. This overview looks at the kinds of information improvements targeted by the IMMS project, related issues, the proposed information architecture, and the progress to date in implementing the system.

Y-12 Integrated Materials Management System

International Nuclear Information System (INIS)

Alspaugh, D. H.; Hickerson, T. W.

2002-01-01

The Integrated Materials Management System, when fully implemented, will provide the Y-12 National Security Complex with advanced inventory information and analysis capabilities and enable effective assessment, forecasting and management of nuclear materials, critical non-nuclear materials, and certified supplies. These capabilities will facilitate future Y-12 stockpile management work, enhance interfaces to existing National Nuclear Security Administration (NNSA) corporate-level information systems, and enable interfaces to planned NNSA systems. In the current national nuclear defense environment where, for example, weapons testing is not permitted, material managers need better, faster, more complete information about material properties and characteristics. They now must manage non-special nuclear material at the same high-level they have managed SNM, and information capabilities about both must be improved. The full automation and integration of business activities related to nuclear and non-nuclear materials that will be put into effect by the Integrated Materials Management System (IMMS) will significantly improve and streamline the process of providing vital information to Y-12 and NNSA managers. This overview looks at the kinds of information improvements targeted by the IMMS project, related issues, the proposed information architecture, and the progress to date in implementing the system

An Operations Management System for the Space Station

Science.gov (United States)

Rosenthal, H. G.

1986-09-01

This paper presents an overview of the conceptual design of an integrated onboard Operations Management System (OMS). Both hardware and software concepts are presented and the integrated space station network is discussed. It is shown that using currently available software technology, an integrated software solution for Space Station management and control, implemented with OMS software, is feasible.

Small Water System Management Program: 100 K Area

International Nuclear Information System (INIS)

Hunacek, G.S. Jr.

1995-01-01

Purposes of this document are: to provide an overview of the service and potable water system presently in service at the Hanford Site's 100 K Area; to provide future system forecasts based on anticipated DOE activities and programs; to delineate performance, design, and operations criteria; and to describe planned improvements. The objective of the small water system management program is to assure the water system is properly and reliably managed and operated, and continues to exist as a functional and viable entity in accordance with WAC 246-290-410

Profitability of Management Systems on German Fenlands

Directory of Open Access Journals (Sweden)

Marco Rebhann

2016-10-01

Full Text Available Fens are organic sites that require drainage for agricultural use. Lowering the groundwater level leads to trade-offs between economic benefits and environmental impacts (i.e., CO2 and nutrient emissions. To identify management options that are both environmentally and economically sustainable, a propaedeutic systematic analysis of the costs, income and profit of different land use and management systems on fenlands is necessary. This study provides an overview of the profitability, labor demand and comparative advantages of feasible management systems on German fenlands. Twenty management practices in four land use systems are analyzed. The results indicate that most management systems are profitable only with subsidies and payments for ecosystem services. In addition to sales revenue, these payments are indispensable to promote peat-saving agricultural practices on fenlands. Regarding the labor aspect, intensive management systems caused an increase in working hours per hectare, which may positively affect employment in rural areas. The calculations obtained in this study can be used as a basis for estimations of greenhouse gas (GHG mitigation costs when management systems are associated with GHG emission values.

Systems approach to project risk management

Energy Technology Data Exchange (ETDEWEB)

Kindinger, J. P. (John P.)

2002-01-01

This paper describes the need for better performance in the planning and execution of projects and examines the capabilities of two different project risk analysis methods for improving project performance. A quantitative approach based on concepts and tools adopted from the disciplines of systems analysis, probabilistic risk analysis, and other fields is advocated for managing risk in large and complex research & development projects. This paper also provides an overview of how this system analysis approach for project risk management is being used at Los Alamos National Laboratory along with examples of quantitative risk analysis results and their application to improve project performance.

THRMS: A pilot risk management system

International Nuclear Information System (INIS)

Xue, D.; Xu, Y.

2000-01-01

Daya Bay NPP is the first commercial nuclear power plant in China. This plant is interested in and pro-active towards the development and application of PSA and PSA tools. This, together with the support from the IAEA promoted the project 'THRMS: the pilot study of risk management system for NPP'. The objectives in development and implementation of THRMS includes: survey and discuss on the development of the approaches used in constructing plant risk models; design and study on the realization of a real-time risk management system. An overview of the project is presented in this paper. (author)

Decision-Oriented Project Ranking for Asset Management System: Rail Net Denmark

DEFF Research Database (Denmark)

Salling, Kim Bang; Moshøj, Claus Rehfeld; Timm, Henrik

2007-01-01

is to apply a modified project ranking methodology: Asset Management System Priority Module (AMS-PM), which is a practical tool for assessing and ranking various project proposals in a straightforward manner. The methodology is set-out by a multi-criteria approach where weights are applied ultimately...... resulting in priority indices for the state-of-repair data. This paper is disposed as follows; firstly, a description of the Asset Management system is set-up including an overview of the state-of-repair data and the case study. Secondly, is the AMS-PM software model implemented through an exploratory case......The Danish rail net operator, Rail Net Denmark, has through the past years built up an Asset Management system, containing a certain percentile of all the company’s assets. This paper contains an elaborate overview on how to strengthen the system seen from a decision-support perspective. The focus...

Overview of RepLab 2012: Evaluating Online Reputation Management Systems

NARCIS (Netherlands)

Amigó, E.; Corujo, A.; Gonzalo, J.; Meij, E.; de Rijke, M.

2012-01-01

This paper summarizes the goals, organization and results of the first RepLab competitive evaluation campaign for Online Reputation Management Systems (RepLab 2012). RepLab focused on the reputation of companies, and asked participant systems to annotate different types of information on tweets

Recommendation Report: EJournals/EBooks A-Z Management System

KAUST Repository

Ramli, Rindra M.

2014-01-01

This is a recommendation report for KAUST Library on the Ejournals / EBooks AZ Management systems project. It briefly described the issues faced by the ERM Team, project plan overview and the project findings as well as the recommendation(s).

The intelligent user interface for NASA's advanced information management systems

Science.gov (United States)

Campbell, William J.; Short, Nicholas, Jr.; Rolofs, Larry H.; Wattawa, Scott L.

1987-01-01

NASA has initiated the Intelligent Data Management Project to design and develop advanced information management systems. The project's primary goal is to formulate, design and develop advanced information systems that are capable of supporting the agency's future space research and operational information management needs. The first effort of the project was the development of a prototype Intelligent User Interface to an operational scientific database, using expert systems and natural language processing technologies. An overview of Intelligent User Interface formulation and development is given.

Research data management courses : An overview and gap analysis for the Netherlands

NARCIS (Netherlands)

Osinski, L.; van Zeeland, Hilde; Fest, Ellen; Vanderfeesten, Maurice; Scholten, Jolien; van Bentum, Maarten; Schoots, Fieke

2018-01-01

UKB’s working group Research Data has created an overview of research data management course materials from universities across the Netherlands. All working group members, as well as members of the associated National Coordination Point of Research Data Management (LCRDM), were asked to provide

"Smart" Vehicle Management System: A Necessity for Future Endeavors

Science.gov (United States)

Haddock, A. T.; Olden, G. W.; Barnes, P. K.

2018-02-01

The "Smart" Vehicle Management System (VMS) will give an overview of how a robust VMS would enable experiments to be conducted on the spacecraft in both manned and unmanned states, increasing the scientific benefits.

Electronic waste management approaches: An overview

Energy Technology Data Exchange (ETDEWEB)

Kiddee, Peeranart [Centre for Environmental Risk Assessment and Remediation, University of South Australia, Mawson Lakes Campus, Adelaide, SA 5095 (Australia); Cooperative Research Centre for Contamination Assessment and Remediation of the Environment, Mawson Lakes Campus, Adelaide, SA 5095 (Australia); Naidu, Ravi, E-mail: ravi.naidu@crccare.com [Centre for Environmental Risk Assessment and Remediation, University of South Australia, Mawson Lakes Campus, Adelaide, SA 5095 (Australia); Cooperative Research Centre for Contamination Assessment and Remediation of the Environment, Mawson Lakes Campus, Adelaide, SA 5095 (Australia); Wong, Ming H. [Croucher Institute for Environmental Sciences, Department of Biology, Hong Kong Baptist University, Kowloon Tong (China)

2013-05-15

Highlights: ► Human toxicity of hazardous substances in e-waste. ► Environmental impacts of e-waste from disposal processes. ► Life Cycle Assessment (LCA), Material Flow Analysis (MFA), Multi Criteria Analysis (MCA) and Extended Producer Responsibility (EPR) to and solve e-waste problems. ► Key issues relating to tools managing e-waste for sustainable e-waste management. - Abstract: Electronic waste (e-waste) is one of the fastest-growing pollution problems worldwide given the presence if a variety of toxic substances which can contaminate the environment and threaten human health, if disposal protocols are not meticulously managed. This paper presents an overview of toxic substances present in e-waste, their potential environmental and human health impacts together with management strategies currently being used in certain countries. Several tools including Life Cycle Assessment (LCA), Material Flow Analysis (MFA), Multi Criteria Analysis (MCA) and Extended Producer Responsibility (EPR) have been developed to manage e-wastes especially in developed countries. The key to success in terms of e-waste management is to develop eco-design devices, properly collect e-waste, recover and recycle material by safe methods, dispose of e-waste by suitable techniques, forbid the transfer of used electronic devices to developing countries, and raise awareness of the impact of e-waste. No single tool is adequate but together they can complement each other to solve this issue. A national scheme such as EPR is a good policy in solving the growing e-waste problems.

Electronic waste management approaches: An overview

International Nuclear Information System (INIS)

Kiddee, Peeranart; Naidu, Ravi; Wong, Ming H.

2013-01-01

Highlights: ► Human toxicity of hazardous substances in e-waste. ► Environmental impacts of e-waste from disposal processes. ► Life Cycle Assessment (LCA), Material Flow Analysis (MFA), Multi Criteria Analysis (MCA) and Extended Producer Responsibility (EPR) to and solve e-waste problems. ► Key issues relating to tools managing e-waste for sustainable e-waste management. - Abstract: Electronic waste (e-waste) is one of the fastest-growing pollution problems worldwide given the presence if a variety of toxic substances which can contaminate the environment and threaten human health, if disposal protocols are not meticulously managed. This paper presents an overview of toxic substances present in e-waste, their potential environmental and human health impacts together with management strategies currently being used in certain countries. Several tools including Life Cycle Assessment (LCA), Material Flow Analysis (MFA), Multi Criteria Analysis (MCA) and Extended Producer Responsibility (EPR) have been developed to manage e-wastes especially in developed countries. The key to success in terms of e-waste management is to develop eco-design devices, properly collect e-waste, recover and recycle material by safe methods, dispose of e-waste by suitable techniques, forbid the transfer of used electronic devices to developing countries, and raise awareness of the impact of e-waste. No single tool is adequate but together they can complement each other to solve this issue. A national scheme such as EPR is a good policy in solving the growing e-waste problems

FOCUS: a fire management planning system -- final report

Science.gov (United States)

Frederick W. Bratten; James B. Davis; George T. Flatman; Jerold W. Keith; Stanley R. Rapp; Theodore G. Storey

1981-01-01

FOCUS (Fire Operational Characteristics Using Simulation) is a computer simulation model for evaluating alternative fire management plans. This final report provides a broad overview of the FOCUS system, describes two major modules-fire suppression and cost, explains the role in the system of gaming large fires, and outlines the support programs and ways of...

ON EXPERIENCE OF THE ELECTRONIC DOCUMENT MANAGEMENT SYSTEM IMPLEMENTATION IN THE MEDICAL UNIVERSITY

OpenAIRE

A. V. Semenets; V. Yu. Kovalok

2015-01-01

An importance of the application of the electronic document management to the Ukraine healthcare is shown. The electronic document management systems market overview is presented. Example of the usage of the open-source electronic document management system in the Ternopil State Medical University by I. Ya. Horbachevsky is shown. The implementation capabilities of the electronic document management system within a cloud services are shown. The electronic document management features of the Mi...

Overview and Status of the Ceph File System

CERN Multimedia

CERN. Geneva

2017-01-01

The Ceph file system (CephFS) is the POSIX-compatible distributed file system running on top of Ceph's powerful and stable object store. This presentation will give a general introduction of CephFS and detail the recent work the Ceph team has done to improve its stability and usability. In particular, we will cover directory fragmentation, multiple active metadata servers, and directory subtree pinning to metadata servers, features slated for stability in the imminent Luminous release. This talk will also give an overview of how we are measuring performance of multiple active metadata servers using large on-demand cloud deployments. The results will highlight how CephFS distributes metadata load across metadata servers to achieve scaling. About the speaker Patrick Donnelly is a software engineer at Red Hat, Inc. currently working on the Ceph distributed file system. In 2016 he completed his Ph.D. in computer science at the University of Notre Dame with a dissertation on the topic of file transfer management...

Assignment Procedures in the Air Force Procurement Management Information System.

Science.gov (United States)

Ward, Joe H., Jr.; And Others

An overview is presented of the procedure for offering jobs in the Air Force Procurement Management Information System (PROMIS), an assignment system which makes possible the use of human resources research findings to improve individual personnel assignments. A general framework for viewing personnel assignment systems is presented; then job…

Data Base Management Systems Panel Workshop: Executive summary

Science.gov (United States)

1979-01-01

Data base management systems (DBMS) for space acquired and associated data are discussed. The full range of DBMS needs is covered including acquiring, managing, storing, archiving, accessing and dissemination of data for an application. Existing bottlenecks in DBMS operations, expected developments in the field of remote sensing, communications, and computer science are discussed, and an overview of existing conditions and expected problems is presented. The requirements for a proposed spatial information system and characteristics of a comprehensive browse facility for earth observations applications are included.

Generic Health Management: A System Engineering Process Handbook Overview and Process

Science.gov (United States)

Wilson, Moses Lee; Spruill, Jim; Hong, Yin Paw

1995-01-01

Health Management, a System Engineering Process, is one of those processes-techniques-and-technologies used to define, design, analyze, build, verify, and operate a system from the viewpoint of preventing, or minimizing, the effects of failure or degradation. It supports all ground and flight elements during manufacturing, refurbishment, integration, and operation through combined use of hardware, software, and personnel. This document will integrate Health Management Processes (six phases) into five phases in such a manner that it is never a stand alone task/effort which separately defines independent work functions.

DKIST facility management system integration

Science.gov (United States)

White, Charles R.; Phelps, LeEllen

2016-07-01

The Daniel K. Inouye Solar Telescope (DKIST) Observatory is under construction at Haleakalā, Maui, Hawai'i. When complete, the DKIST will be the largest solar telescope in the world. The Facility Management System (FMS) is a subsystem of the high-level Facility Control System (FCS) and directly controls the Facility Thermal System (FTS). The FMS receives operational mode information from the FCS while making process data available to the FCS and includes hardware and software to integrate and control all aspects of the FTS including the Carousel Cooling System, the Telescope Chamber Environmental Control Systems, and the Temperature Monitoring System. In addition it will integrate the Power Energy Management System and several service systems such as heating, ventilation, and air conditioning (HVAC), the Domestic Water Distribution System, and the Vacuum System. All of these subsystems must operate in coordination to provide the best possible observing conditions and overall building management. Further, the FMS must actively react to varying weather conditions and observational requirements. The physical impact of the facility must not interfere with neighboring installations while operating in a very environmentally and culturally sensitive area. The FMS system will be comprised of five Programmable Automation Controllers (PACs). We present a pre-build overview of the functional plan to integrate all of the FMS subsystems.

Expert Systems: An Overview for Teacher-Librarians.

Science.gov (United States)

Orwig, Gary; Barron, Ann

1992-01-01

Provides an overview of expert systems for teacher librarians. Highlights include artificial intelligence and expert systems; the development of the MYCIN medical expert system; rule-based expert systems; the use of expert system shells to develop a specific system; and how to select an appropriate application for an expert system. (11 references)…

Communications and Intelligent Systems Division - Division Overview

Science.gov (United States)

Miranda, Felix A.

2017-01-01

This presentation provides an overview of the research and engineering work being performed in the competency fields of advanced communications and intelligent systems with emphasis on advanced technologies, architecture definition,and systems development for application in current and future aeronautics and space communications systems.

ON EXPERIENCE OF THE ELECTRONIC DOCUMENT MANAGEMENT SYSTEM IMPLEMENTATION IN THE MEDICAL UNIVERSITY

Directory of Open Access Journals (Sweden)

A. V. Semenets

2015-05-01

Full Text Available An importance of the application of the electronic document management to the Ukraine healthcare is shown. The electronic document management systems market overview is presented. Example of the usage of the open-source electronic document management system in the Ternopil State Medical University by I. Ya. Horbachevsky is shown. The implementation capabilities of the electronic document management system within a cloud services are shown. The electronic document management features of the Microsoft Office 365 and Google Apps For Education are compared. Some results of the usage of the Google Apps For Education inTSMUas electronic document management system are presented.

Patient relationship management: an overview and study of a follow-up system.

Science.gov (United States)

Oinas-Kukkonen, Harri; Räisänen, Teppo; Hummastenniemi, Niko

2008-01-01

Customer relationship management research is utilized to explain the need for a more patient-oriented support in patient care. This article presents a European study on how various hospital units of a single healthcare organization have utilized a patient relationship management system--in particular a patient treatment follow-up system--and how it affects patient care and the knowledge work performed by the medical staff. Eight physicians were interviewed at a university hospital on whether patient treatment was improved through a follow-up system that had been in use in the case organization for three years. The interviewees represented various hospital units, and all of them had used the system at their own unit. The results indicate that it is possible to improve patient care through more personalized treatment. The follow-up treatment system seems to be a tool to create and maintain better communication with the patients rather than just a technological solution. It may help better understand and analyze both individual patients and patient groups. For individual physicians it provides a way to reflect professional skills. The system was lacking in its support for one-to-one communication with patients. Nevertheless, the system is an example of patient relationship management which may help healthcare units to move towards a more patient-oriented care.

Generalized Database Management System Support for Numeric Database Environments.

Science.gov (United States)

Dominick, Wayne D.; Weathers, Peggy G.

1982-01-01

This overview of potential for utilizing database management systems (DBMS) within numeric database environments highlights: (1) major features, functions, and characteristics of DBMS; (2) applicability to numeric database environment needs and user needs; (3) current applications of DBMS technology; and (4) research-oriented and…

Foundational Report Series: Advanced Distribution Management Systems for Grid Modernization, Implementation Strategy for a Distribution Management System

Energy Technology Data Exchange (ETDEWEB)

Singh, Ravindra [Argonne National Lab. (ANL), Argonne, IL (United States); Reilly, James T. [Reilly Associates, Pittston, PA (United States); Wang, Jianhui [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-03-01

Electric distribution utilities encounter many challenges to successful deployment of Distribution Management Systems (DMSs). The key challenges are documented in this report, along with suggestions for overcoming them. This report offers a recommended list of activities for implementing a DMS. It takes a strategic approach to implementing DMS from a project management perspective. The project management strategy covers DMS planning, procurement, design, building, testing, Installation, commissioning, and system integration issues and solutions. It identifies the risks that are associated with implementation and suggests strategies for utilities to use to mitigate them or avoid them altogether. Attention is given to common barriers to successful DMS implementation. This report begins with an overview of the implementation strategy for a DMS and proceeds to put forward a basic approach for procuring hardware and software for a DMS; designing the interfaces with external corporate computing systems such as EMS, GIS, OMS, and AMI; and implementing a complete solution.

MIRAGE: system overview and status

Science.gov (United States)

Robinson, Richard M.; Oleson, Jim; Rubin, Lane; McHugh, Stephen W.

2000-07-01

Santa Barbara Infrared's (SBIR) MIRAGE (Multispectral InfraRed Animation Generation Equipment) is a state-of-the-art dynamic infrared scene projector system. Imagery from the first MIRAGE system was presented to the scene simulation community during last year's SPIE AeroSense 99 Symposium. Since that time, SBIR has delivered five MIRAGE systems. This paper will provide an overview of the MIRAGE system and discuss the current status of the MIRAGE. Included is an update of system hardware, and the current configuration. Proposed upgrades to this configuration and options will be discussed. Updates on the latest installations, applications and measured data will also be presented.

Human Research Program Science Management: Overview of Research and Development Activities

Science.gov (United States)

Charles, John B.

2007-01-01

An overview of research and development activities of NASA's Human Research Science Management Program is presented. The topics include: 1) Human Research Program Goals; 2) Elements and Projects within HRP; 3) Development and Maintenance of Priorities; 4) Acquisition and Evaluation of Research and Technology Proposals; and 5) Annual Reviews

Smart health monitoring systems: an overview of design and modeling.

Science.gov (United States)

Baig, Mirza Mansoor; Gholamhosseini, Hamid

2013-04-01

Health monitoring systems have rapidly evolved during the past two decades and have the potential to change the way health care is currently delivered. Although smart health monitoring systems automate patient monitoring tasks and, thereby improve the patient workflow management, their efficiency in clinical settings is still debatable. This paper presents a review of smart health monitoring systems and an overview of their design and modeling. Furthermore, a critical analysis of the efficiency, clinical acceptability, strategies and recommendations on improving current health monitoring systems will be presented. The main aim is to review current state of the art monitoring systems and to perform extensive and an in-depth analysis of the findings in the area of smart health monitoring systems. In order to achieve this, over fifty different monitoring systems have been selected, categorized, classified and compared. Finally, major advances in the system design level have been discussed, current issues facing health care providers, as well as the potential challenges to health monitoring field will be identified and compared to other similar systems.

Strengthening Performance Management System Implementation in South African Municipalities

Directory of Open Access Journals (Sweden)

Malefetsane Mofolo

2012-06-01

Full Text Available Adoption of a performance management system in municipalities presented a serious challenge for its implementation. This scenario is implicitly manifesting itself in the reports of the Auditor-General on the financial statements and performance of municipalities, as well as in the state of local government in South Africa overview report (2009. These reports called for the conceptualisation of a model that to strengthen the implementation in municipalities of a performance management system that is efficient and effective. And most importantly, this model could be beneficial for growth, development and effective service delivery.

Self-management interventions for young people with chronic conditions: A systematic overview.

NARCIS (Netherlands)

R. Bal; Dr. A.L. van Staa; MSc M.I. Bal; Dr. J.N.T. Sattoe; Dr. P.D.D.M. Roelofs; Dr. H.S. Miedema

2015-01-01

OBJECTIVE: To provide a systematic overview of self-management interventions (SMI) for young people with chronic conditions with respect to content, formats, theories, and evaluated outcomes. METHODS: Embase, Medline, PsycINFO, Web-of-Science, CINAHL, and Cochrane were searched. Reviews'

Self-management interventions for young people with chronic conditions: a systematic overview.

NARCIS (Netherlands)

Sattoe, J.N.T.; Bal, M.I.; Roelofs, P.D.D.M.; Bal, R.; Miedema, H.S.; Staa, A. van

2015-01-01

Objective: To provide a systematic overview of self-management interventions (SMI) for young people with chronic conditions with respect to content, formats, theories, and evaluated outcomes. Methods: Embase, Medline, PsycINFO, Web-of-Science, CINAHL, and Cochrane were searched. Reviews’ reference

Overview of LLRF Systems

CERN Document Server

Liepe, Matthias

2005-01-01

In the past two decades accelerator controls and feedback systems have changed dramatically. While in the past relative simple analog systems where used, present systems are highly complex, and all accelerators in planning or under construction heavily relay on advanced feedback and feedforward control schemes. The Low-Level-Radio-Frequency (LLRF) system not only stabilizes the field in the RF cavities, but also has to provide among other things frequency control, exception handling, extensive diagnostic, and performance and machine availability maximization. As manifold as the tasks are for the LLRF system, so are the challenges. Linac driven light sources require highest field stability, while pulsed machines or low beta linacs bring their own challenges for the LLRF system. This presentation reviews the challenges and demands on present and future LLRF systems, gives an overview of state-of-the-art solutions, and an introduction into a very active and exciting field of accelerator physics.

Overview of Actuated Arm Support Systems and Their Applications

Directory of Open Access Journals (Sweden)

E.A. Lomonova

2013-10-01

Full Text Available Arm support systems provide support throughout daily tasks, training or in an industrial environment. During the last decades a large diversity of actuated arm support systems have been developed. To analyze the actuation principles in these systems, an overview of actuated arm support systems is provided. This overview visualizes the current trends on research and development of these support systems and distinguishes three categories. These categories depend mainly on the functional status of the user environment, which defines the specifications. Therefore, the actuated arm support systems are classified according to their user environment, namely: ambulatory, rehabilitation and industrial. Furthermore, three main actuation principles and three mechanical construction principles have been identified.

Integrated groundwater management: An overview of concepts and challenges

Science.gov (United States)

Jakeman, Anthony J.; Barreteau, Olivier; Hunt, Randall J.; Rinaudo, Jean-Daniel; Ross, Andrew; Jakeman, Anthony J.; Barreteau, Olivier; Hunt, Randall J.; Rinaudo, Jean-Daniel; Ross, Andrew

2016-01-01

Managing water is a grand challenge problem and has become one of humanity’s foremost priorities. Surface water resources are typically societally managed and relatively well understood; groundwater resources, however, are often hidden and more difficult to conceptualize. Replenishment rates of groundwater cannot match past and current rates of depletion in many parts of the world. In addition, declining quality of the remaining groundwater commonly cannot support all agricultural, industrial and urban demands and ecosystem functioning, especially in the developed world. In the developing world, it can fail to even meet essential human needs. The issue is: how do we manage this crucial resource in an acceptable way, one that considers the sustainability of the resource for future generations and the socioeconomic and environmental impacts? In many cases this means restoring aquifers of concern to some sustainable equilibrium over a negotiated period of time, and seeking opportunities for better managing groundwater conjunctively with surface water and other resource uses. However, there are many, often-interrelated, dimensions to managing groundwater effectively. Effective groundwater management is underpinned by sound science (biophysical and social) that actively engages the wider community and relevant stakeholders in the decision making process. Generally, an integrated approach will mean “thinking beyond the aquifer”, a view which considers the wider context of surface water links, catchment management and cross-sectoral issues with economics, energy, climate, agriculture and the environment. The aim of the book is to document for the first time the dimensions and requirements of sound integrated groundwater management (IGM). The primary focus is on groundwater management within its system, but integrates linkages beyond the aquifer. The book provides an encompassing synthesis for researchers, practitioners and water resource managers on the concepts and

Entry, Descent and Landing Systems Analysis: Exploration Class Simulation Overview and Results

Science.gov (United States)

DwyerCianciolo, Alicia M.; Davis, Jody L.; Shidner, Jeremy D.; Powell, Richard W.

2010-01-01

NASA senior management commissioned the Entry, Descent and Landing Systems Analysis (EDL-SA) Study in 2008 to identify and roadmap the Entry, Descent and Landing (EDL) technology investments that the agency needed to make in order to successfully land large payloads at Mars for both robotic and exploration or human-scale missions. The year one exploration class mission activity considered technologies capable of delivering a 40-mt payload. This paper provides an overview of the exploration class mission study, including technologies considered, models developed and initial simulation results from the EDL-SA year one effort.

Information management challenges of the EOS Data and Information System

Science.gov (United States)

Mcdonald, Kenneth R.; Blake, Deborah J.

1991-01-01

An overview of the current information management concepts that are embodied in the plans for the Earth Observing System Data and Information System (EOSDIS) is presented, and some of the technology development and application areas that are envisioned to be particularly challenging are introduced. The Information Management System (IMS) is the EOSDIS element that provides the primary interface between the science users and the data products and services of EOSDIS. The goals of IMS are to define a clear and complete set of functional requirements and to apply innovative methods and technologies to satisfy them. The information management functions are described in detail, and some applicable technolgies are discussed. Some of the general issues affecting the successful development and operation of the information management element are addressed.

An overview of radioactive waste management in Canada

International Nuclear Information System (INIS)

Liblong, S.W.; Wong, C.F.

2014-01-01

As a Tier I nuclear nation, with a comprehensive nuclear sector whose beginnings date back to the 1940's, Canada is faced with radioactive waste management challenges for a diverse range of radioactive material - from very low-level to high-level. The nuclear fuel cycle is fully realized in Canada, from uranium mines and mills through to significant reliance on nuclear energy thorough to a broad-based science & technology platform. Natural Resources Canada is responsible for Canadian nuclear policy, while the provincial governments decide on the management of their resources and energy mix within their jurisdictions. While the fundamental policy regarding responsibility for radioactive waste places the onus on the generator, the means by which this is accomplished is not prescriptive beyond meeting regulatory requirements. As a result, approaches to dealing with radioactive waste have evolved according to the needs and abilities of the various generators. This paper will provide an overview of radioactive waste management in Canada, highlighting the approaches used within various sectors for the different classifications of waste, and will also look at plans for future waste management capabilities being developed at this time (including issues related to disposal vs. management). Challenges to the development of an effective and comprehensive 'Canadian solution' will also be discussed. (author)

Continuous Risk Management: An Overview

Science.gov (United States)

Rosenberg, Linda; Hammer, Theodore F.

1999-01-01

Software risk management is important because it helps avoid disasters, rework, and overkill, but more importantly because it stimulates win-win situations. The objectives of software risk management are to identify, address, and eliminate software risk items before they become threats to success or major sources of rework. In general, good project managers are also good managers of risk. It makes good business sense for all software development projects to incorporate risk management as part of project management. The Software Assurance Technology Center (SATC) at NASA GSFC has been tasked with the responsibility for developing and teaching a systems level course for risk management that provides information on how to implement risk management. The course was developed in conjunction with the Software Engineering Institute at Carnegie Mellon University, then tailored to the NASA systems community. This is an introductory tutorial to continuous risk management based on this course. The rational for continuous risk management and how it is incorporated into project management are discussed. The risk management structure of six functions is discussed in sufficient depth for managers to understand what is involved in risk management and how it is implemented. These functions include: (1) Identify the risks in a specific format; (2) Analyze the risk probability, impact/severity, and timeframe; (3) Plan the approach; (4) Track the risk through data compilation and analysis; (5) Control and monitor the risk; (6) Communicate and document the process and decisions.

An Overview of Demand Side Management Control Schemes for Buildings in Smart Grids

DEFF Research Database (Denmark)

Kosek, Anna Magdalena; Costanzo, Giuseppe Tommaso; Bindner, Henrik W.

2013-01-01

The increasing share of distributed energy resources and renewable energy in power systems results in a highly variable and less controllable energy production. Therefore, in order to ensure stability and to reduce the infrastructure and operation cost of the power grid, flexible and controllable...... of the power sector in mind and thus can differ significantly in their architecture, their integration into the various markets, their integration into distribution network operation and several other aspects. This paper proposes a classification of load control policies for demand side management in smart...... buildings, based on external behavior: direct, indirect, transactional and autonomous control; internal operation: decision support system scope, control strategy, failure handling and architecture. This classification assists in providing an overview of the control schemes as well as different ways...

The DIRAC Data Management System (poster)

CERN Document Server

Haen, Christophe

2015-01-01

The DIRAC Interware provides a development framework and a complete set of components for building distributed computing systems. The DIRAC Data Management System (DMS) offers all the necessary tools to ensure data handling operations for small and large user communities. It supports transparent access to storage resources based on multiple technologies, and is easily expandable. The information on data files and replicas is kept in a File Catalog of which DIRAC offers a powerful and versatile implementation (DFC). Data movement can be performed using third party services including FTS3. Bulk data operations are resilient with respect to failures due to the use of the Request Management System (RMS) that keeps track of ongoing tasks. In this contribution we will present an overview of the DIRAC DMS capabilities and its connection with other DIRAC subsystems such as the Transformation System. The DIRAC DMS is in use by several user communities now. The contribution will present the experience of the LHCb exper...

Managing a chest tube and drainage system.

Science.gov (United States)

Durai, Rajaraman; Hoque, Happy; Davies, Tony W

2010-02-01

Intercostal drainage tubes (ie, chest tubes) are inserted to drain the pleural cavity of air, blood, pus, or lymph. The water-seal container connected to the chest tube allows one-way movement of air and liquid from the pleural cavity. The container should not be changed unless it is full, and the chest tube should not be clamped unnecessarily. After a chest tube is inserted, a nurse trained in chest-tube management is responsible for managing the chest tube and drainage system. This entails monitoring the chest-tube position, controlling fluid evacuation, identifying when to change or empty the containers, and caring for the tube and drainage system during patient transport. This article provides an overview of indications, insertion techniques, and management of chest tubes. Copyright 2010 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Bladder cancer: overview and disease management. Part 1: non-muscle-invasive bladder cancer.

Science.gov (United States)

Anderson, Beverley

2018-05-10

Part 1 of this two-part article provides an overview of bladder cancer and discusses its management. Since publication of a previous article entitled 'Understanding the role of smoking in the aetiology of bladder cancer' ( Anderson, 2009 ), the author has received many requests for an update. This article provides an overview of bladder cancer and its current management practices, underlining the continued role of smoking as the predominant risk factor in the disease's development. The management of bladder cancer is governed by specific guidelines. Management of non-muscle-invasive cancers, including surgical intervention with transurethral resection, and intravesical therapy using chemotherapy and immunotherapy agents, is discussed. Cystectomy (removal of the bladder), is sometimes necessary. Treatments are effective in reducing tumour recurrence, but the effects of the risks and side-effects on the individual's quality of life can be significant. The prevalence of bladder cancer, and the nature of its management make this cancer one of the most expensive for the NHS to treat. The effectiveness of health promotional strategies in increasing peoples' awareness of their risk of developing the disease, and in enabling them to change long-term health behaviours is discussed. The role of the multidisciplinary team is explored, along with that of the uro-oncology cancer nurse specialist. Part 2 will consider the management of muscle-invasive and metastatic bladder cancer.

Nuclear knowledge management overview at EDF

International Nuclear Information System (INIS)

Ballay, J.; Vannieuwenhuyse, J.

2004-01-01

This paper gives an overview of knowledge management practices in the French nuclear generation park. The study was initially partnered by one of the 19 Nuclear Power-plants, located at Golfech near Toulouse, and then extended to a more general overview. Golfech is a 650 people unit, from which 25 of them were interviewed to carry out the study. These staffs were made of managers, experts, seniors and juniors, all of them being working at Golfech in the different skills for nuclear generation needs: driving, engineering, maintenance, safety, environment, etc. They were questioned about their practices, tools and organisations concerning creating, sharing, transferring, and renewing knowledge. The study shows that professional knowledge is fundamentally made of four levels, which are embedded, by specific leverages and experiences. The first level is made of the 'basic knowledge' which is required in every job, especially for juniors. It is delivered by the means of Human Resources and education systems: Recruitment, Learning and Training, Simulators, juniors mentoring, and Competencies management processes. These systems are thus the first category of KM processes. The second level of knowledge is the 'technical knowledge', that is codified in the procedures, norms, and all the technical specifications. This knowledge has grown up for 4 decades, by a special KM process called return on experience. This KM process is driven by a systematic way. Every technical problem is registered, analysed, and evaluated by experts and managers networks, and discussed with other stakeholders, so that recommendations can be held on at a national level. This return on experience process is a collective learning process, very efficient for safety and performance of the French nuclear park. By this process, the explicit knowledge of the last 3 decades is stored in a large knowledge base made of 10,000 documents a year. It is important to notice that, due to its explicit and collective

Federal Energy Efficiency through Utility Partnerships: Federal Energy Management Program (FEMP) Program Overview Fact Sheet

International Nuclear Information System (INIS)

Beattie, D.; Wolfson, M.

2001-01-01

This Utility Program Overview describes how the Federal Energy Management Program (FEMP) utility program assists Federal energy managers. The document identifies both a utility financing mechanism and FEMP technical assistance available to support agencies' implementation of energy and water efficiency methods and renewable energy projects

EDP systems for the operational management of nuclear power plant

International Nuclear Information System (INIS)

Doerler, R.

1987-01-01

An EDP-aided operational management system is to be understood as the total of all organizational conditions (structural organization, procedural organization) and technical means, and is intended to give the individual person a better overview to fulfill his/her responsibilities. The introduction of such a system is aimed at providing the operating personnel with a set of tools matching today's technology for management and administration systems which will enable them to fulfill their tasks in an optimum way. Powerful EDP systems are already used in many nuclear power plants to control and monitor operating processes and to collect and evaluate operational data. (orig./DG) [de

Spanish high level radioactive waste management system issues

International Nuclear Information System (INIS)

Espejo, J.M.; Beceiro, A.R.

1992-01-01

The Empresa Nacional de Residuos Radiactivos, S.A. (ENRESA) has been limited liability company to be responsible for the management of all kind of radioactive wastes in Spain. This paper provides an overview of the strategy and main lines of action stated in the third General Radioactive Waste Plan, currently in force, for the management of spent nuclear fuel and high - level wastes, as well as an outline of the main related projects, either being developed or foreseen. Aspects concerning the organizational structure, the economic and financing system and the international cooperation are also included

GeoCEGAS: natural gas distribution management system

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, Lorena C.J. [Companhia de Gas do Ceara (CEGAS), Fortaleza, CE (Brazil); Targa, Fernando O. [Gestao Empresarial e Informatica Ltda. (GEMPI), Sao Paulo, SP (Brazil)

2009-07-01

This Technical Paper approach the conception, architecture, design, construction, and implementation of GeoCEGAS, a spatially enabled corporate management information system, oriented to store and provide Web access, to information associated with the natural gas distribution network, owned by CEGAS. This paper reports business processes, business entities and business intelligence approached on the project, as well as an overview of system architecture, applications, and technology used on the implementation of GeoCEGAS. Finally, is presented an introduction to the work methodology used, as well a synopsis of benefits achievements. (author)

An overview of management of root fractures.

Science.gov (United States)

Prithviraj, D R; Bhalla, H K; Vashisht, R; Regish, K M; Suresh, P

2014-01-01

Crown or root fractures are the most commonly encountered emergencies in the dental clinic. Root fractures occur in fewer than eight percent of the traumatic injuries to permanent teeth. They are broadly classified as horizontal and vertical root fractures. Correct diagnosis of root fractures is essential to ensure a proper treatment plan and hence, the best possible prognosis. Indication of the type of treatment to be used depends primarily on the level of the fracture line. Therefore, a clinician must also have a thorough knowledge of the various treatment approaches to devise a treatment plan accordingly. Various treatment strategies have been proposed, each with their own advantages and disadvantages. Hence, this literature review presents an overview of the various types of root fractures and their management.

Risk Informed Structural Systems Integrity Management

DEFF Research Database (Denmark)

Nielsen, Michael Havbro Faber

2017-01-01

The present paper is predominantly a conceptual contribution with an appraisal of major developments in risk informed structural integrity management for offshore installations together with a discussion of their merits and the challenges which still lie ahead. Starting point is taken in a selected...... overview of research and development contributions which have formed the basis for Risk Based Inspection Planning (RBI) as we know it today. Thereafter an outline of the methodical basis for risk informed structural systems integrity management, i.e. the Bayesian decision analysis is provided in summary....... The main focus is here directed on RBI for offshore facilities subject to fatigue damages. New ideas and methodical frameworks in the area of robustness and resilience modeling of structural systems are then introduced, and it is outlined how these may adequately be utilized to enhance Structural Integrity...

An overview of the NASA electronic components information management system

Science.gov (United States)

Kramer, G.; Waterbury, S.

1991-01-01

The NASA Parts Project Office (NPPO) comprehensive data system to support all NASA Electric, Electronic, and Electromechanical (EEE) parts management and technical data requirements is described. A phase delivery approach is adopted, comprising four principal phases. Phases 1 and 2 support Space Station Freedom (SSF) and use a centralized architecture with all data and processing kept on a mainframe computer. Phases 3 and 4 support all NASA centers and projects and implement a distributed system architecture, in which data and processing are shared among networked database servers. The Phase 1 system, which became operational in February of 1990, implements a core set of functions. Phase 2, scheduled for release in 1991, adds functions to the Phase 1 system. Phase 3, to be prototyped beginning in 1991 and delivered in 1992, introduces a distributed system, separate from the Phase 1 and 2 system, with a refined semantic data model. Phase 4 extends the data model and functionality of the Phase 3 system to provide support for the NASA design community, including integration with Computer Aided Design (CAD) environments. Phase 4 is scheduled for prototyping in 1992 to 93 and delivery in 1994.

DOE-RL Integrated Safety Management System Description

International Nuclear Information System (INIS)

SHOOP, D.S.

2000-01-01

The purpose of this Integrated Safety Management System Description (ISMSD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This ISMSD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this ISMSD contains some information on contractor processes and procedures which then require RL approval or oversight. This ISMSD does not purport to contain a full description of the contractors' ISM System Descriptions

DOE-RL Integrated Safety Management System Description

CERN Document Server

Shoop, D S

2000-01-01

The purpose of this Integrated Safety Management System Description (ISMSD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This ISMSD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this ISMSD contains some information on contractor processes and procedures which then require RL approval or oversight. This ISMSD does not purport to contain a full description of the contractors' ISM System Descriptions.

Remote sensing of vegetation fires and its contribution to a fire management information system

Science.gov (United States)

Stephane P. Flasse; Simon N. Trigg; Pietro N. Ceccato; Anita H. Perryman; Andrew T. Hudak; Mark W. Thompson; Bruce H. Brockett; Moussa Drame; Tim Ntabeni; Philip E. Frost; Tobias Landmann; Johan L. le Roux

2004-01-01

In the last decade, research has proven that remote sensing can provide very useful support to fire managers. This chapter provides an overview of the types of information remote sensing can provide to the fire community. First, it considers fire management information needs in the context of a fire management information system. An introduction to remote sensing then...

An overview of Quality Management System implementation in a research laboratory

Science.gov (United States)

Molinéro-Demilly, Valérie; Charki, Abdérafi; Jeoffrion, Christine; Lyonnet, Barbara; O'Brien, Steve; Martin, Luc

2018-02-01

The aim of this paper is to show the advantages of implementing a Quality Management System (QMS) in a research laboratory in order to improve the management of risks specific to research programmes and to increase the reliability of results. This paper also presents experience gained from feedback following the implementation of the Quality process in a research laboratory at INRA, the French National Institute for Agronomic Research and details the various challenges encountered and solutions proposed to help achieve smoother adoption of a QMS process. The 7Ms (Management, Measurement, Manpower, Methods, Materials, Machinery, Mother-nature) methodology based on the Ishikawa `Fishbone' diagram is used to show the effectiveness of the actions considered by a QMS, which involve both the organization and the activities of the laboratory. Practical examples illustrate the benefits and improvements observed in the laboratory.

In search of balance – managing the dualities of HRM: an overview of the issues

NARCIS (Netherlands)

Boselie, J.P.P.E.F.|info:eu-repo/dai/nl/177012277; Brewster, C.; Paauwe, J.

2009-01-01

Purpose – The purpose of this paper is to provide an overview of the human resource management (HRM) literature that builds up to our current concern with dualities, paradoxes, ambiguities, and balance issues; and to introduce the six papers in this special issue on managing the dualities in HRM.

Delivery arrangements for health systems in low-income countries: an overview of systematic reviews

Science.gov (United States)

Ciapponi, Agustín; Lewin, Simon; Herrera, Cristian A; Opiyo, Newton; Pantoja, Tomas; Paulsen, Elizabeth; Rada, Gabriel; Wiysonge, Charles S; Bastías, Gabriel; Dudley, Lilian; Flottorp, Signe; Gagnon, Marie-Pierre; Garcia Marti, Sebastian; Glenton, Claire; Okwundu, Charles I; Peñaloza, Blanca; Suleman, Fatima; Oxman, Andrew D

2017-01-01

than nurses to lead triage in emergency departments - Groups or teams of midwives providing care for a group of women during pregnancy and childbirth and after childbirth Where care is provided – site of service delivery - Clinics or hospitals that manage a high volume of people living with HIV and AIDS rather than smaller volumes - Intensive home-based care for people living with HIV and AIDS - Home-based management of malaria in children - Providing care closer to home for children with long-term health conditions - Community-based interventions using lay health workers for childhood diarrhoea and pneumonia - Youth HIV and reproductive health services provided outside of health facilities - Decentralising care for initiation and maintenance of HIV and AIDS medicine treatment to peripheral health centres or lower levels of healthcare Information and communication technology - Mobile phone messaging for people with long-term illnesses - Mobile phone messaging reminders for attendance at healthcare appointments - Mobile phone messaging to promote adherence to antiretroviral therapy - Women carrying their own case notes in pregnancy - Information and communication interventions to improve childhood vaccination coverage Quality and safety systems - Establishing clinical information systems to organize patient data for people living with HIV and AIDS Packages that include multiple interventions - Interventions to improve referral for emergency care during pregnancy and childbirth How up to date is this overview? The overview authors searched for systematic reviews that had been published up to 17 December 2016. PMID:28901005

Progress on developing expert systems in waste management and disposal

International Nuclear Information System (INIS)

Rivera, A.L.; Ferrada, J.J.

1990-01-01

The concept of artificial intelligence (AI) represents a challenging opportunity in expanding the potential benefits from computer technology in waste management and disposal. The potential of this concept lies in facilitating the development of intelligent computer systems to help analysts, decision makers, and operators in waste and technology problem solving similar to the way that machines support the laborer. Because the knowledge of multiple human experts is an essential input in the many aspects of waste management and disposal, there are numerous opportunities for the development of expert systems using software products from AI. This paper presents systems analysis as an attractive framework for the development of intelligent computer systems of significance to waste management and disposal, and it provides an overview of limited prototype systems and the commercially available software used during prototype development activities

AQUIS: An air quality and permit information management system

Energy Technology Data Exchange (ETDEWEB)

Smith, A.E.; Huber, C.C.; Tschanz, J. (Argonne National Lab., IL (USA)); Ryckman, S.J. Jr. (Air Force Logistics Command, Wright-Patterson AFB, OH (USA))

1991-01-01

The Air Quality Utility Information System (AQUIS) is a data base management system that operates on a dedicated, IBM-compatible personal computer using dBASE IV. AQUIS is in operation at six of the seven US Air Force Logistics Command (AFLC) bases to assist with the management of the source inventory, permit tracking, and the estimating and tracking of emissions. The system also provides environmental management personnel with information on regulatory requirements and other compliance information. An AFLC base can have over 500 regulated or unregulated emission sources, and the task of tracking and correlating emissions, sources, and permits is substantial. AQUIS is a comprehensive management tool that provides a single system for storing and accessing information previously available only in multiple, uncorrelated files. This paper discusses the development of the system and provides an overview of the system structure and the relationship of that structure to sources in the field. Certain features such as the linking capability and compound-specific emissions are highlighted. The experience of environmental managers, the ultimate system users, is discussed, including specific ways in which AQUIS has proven useful in responding to managers' needs for air quality information. 10 refs., 3 figs., 1 tab.

Coal waste management practices in the USA:an overview

Institute of Scientific and Technical Information of China (English)

Yoginder P. Chugh; Paul T. Behum

2014-01-01

This paper provides an overview of coal waste management practices with two case studies and an estimate of management cost in 2010 US dollars. Processing of as-mined coal typically results in considerable amount of coarse and fine coal processing wastes because of in-seam and out-of-seam dilution mining. Processing plant clean coal recovery values run typically 50%–80%. Trace metals and sulfur may be present in waste materials that may result in leachate water with corrosive charac-teristics. Water discharges may require special measures such as liner and collection systems, and treatment to neutralize acid drainage and/or water quality for trace elements. The potential for variations in coal waste production and quality depends upon mining or processing, plus the long-term methods of waste placement. The changes in waste generation rates and engineering properties of the coal waste during the life of the facility must be considered. Safe, economical and environmentally acceptable management of coal waste involves consideration of geology, soil and rock mechanics, hydrology, hydraulics, geochemistry, soil science, agronomy and environmental sciences. These support all aspects of the regulatory environment including the design and construction of earth and rock embankments and dams, as well as a wide variety of waste disposal structures. Development of impoundments is critical and require considerations of typical water-impounding dams and additional requirements of coal waste disposal impoundments. The primary purpose of a coal waste disposal facility is to dispose of unusable waste materials from mining. However, at some sites coal waste impoundments serve to provide water storage capacity for processing and flood attenuation.

Gasoline engine management systems and components

CERN Document Server

2015-01-01

The call for environmentally compatible and economical vehicles necessitates immense efforts to develop innovative engine concepts. Technical concepts such as gasoline direct injection helped to save fuel up to 20 % and reduce CO2-emissions. Descriptions of the cylinder-charge control, fuel injection, ignition and catalytic emission-control systems provides comprehensive overview of today´s gasoline engines. This book also describes emission-control systems and explains the diagnostic systems. The publication provides information on engine-management-systems and emission-control regulations. Contents History of the automobile.- Basics of the gasoline engine.- Fuels.- Cylinder-charge control systems.- Gasoline injection systems over the years.- Fuel supply.- Manifold fuel injection.- Gasoline direct injection.- Operation of gasoline engines on natural gas.- Ignition systems over the years.- Inductive ignition systems.- Ignition coils.- Spark plugs.- Electronic control.- Sensors.- Electronic control unit.- Exh...

Life cycle costing of waste management systems: Overview, calculation principles and case studies

DEFF Research Database (Denmark)

Martinez Sanchez, Veronica; Kromann, Mikkel A.; Astrup, Thomas Fruergaard

2015-01-01

This paper provides a detailed and comprehensive cost model for the economic assessment of solid waste management systems. The model was based on the principles of Life Cycle Costing (LCC) and followed a bottom-up calculation approach providing detailed cost items for all key technologies within...... regarding the cost assessment of waste management, namely system boundary equivalency, accounting for temporally distributed emissions and impacts, inclusions of transfers, the internalisation of environmental impacts and the coverage of shadow prices, and there was also significant confusion regarding...

Proceedings: 2003 Workshop on Life Cycle Management Planning for Systems, Structures, and Components

International Nuclear Information System (INIS)

2003-01-01

These proceedings of the 2003 EPRI Life Cycle Management Workshop provide nuclear plant owners with an overview of the state of development of methods and tools for performing long-term planning for maintenance, aging management, and obsolescence management of systems, structures, and components important to a plant's long-term safety, power production, and value in a market-driven industry. The proceedings summarize the results of applying life cycle management at several plants

Data Management System of the DIRAC Project

CERN Multimedia

Haen, Christophe; Tsaregorodtsev, Andrei

2015-01-01

The DIRAC Interware provides a development framework and a complete set of components for building distributed computing systems. The DIRAC Data Management System (DMS) offers all the necessary tools to ensure data handling operations for small and large user communities. It supports transparent access to storage resources based on multiple technologies, and is easily expandable. The information on data files and replicas is kept in a File Catalog of which DIRAC offers a powerful and versatile implementation (DFC). Data movement can be performed using third party services including FTS3. Bulk data operations are resilient with respect to failures due to the use of the Request Management System (RMS) that keeps track of ongoing tasks. In this contribution we will present an overview of the DIRAC DMS capabilities and its connection with other DIRAC subsystems such as the Transformation System. The DIRAC DMS is in use by several user communities now. The contribution will present the experience of the LHCb exper...

Domain management OSSs: bridging the gap between legacy and standards-based network management systems

Science.gov (United States)

Lemley, Todd A.

1996-11-01

The rapid change in the telecommunications environment is forcing carriers to re-assess not only their service offering, but also their network management philosophy. The competitive carrier environment has taken away the luxury of throwing technology at a problem by using legacy and proprietary systems and architectures. A more flexible management environment is necessary to effectively gain, and maintain operating margins in the new market era. Competitive forces are driving change which gives carriers more choices than those that are available in legacy and standards-based solutions alone. However, creating an operational support system (OSS) with this gap between legacy and standards has become as dynamic as the services which it supports. A philosophy which helps to integrate the legacy and standards systems is domain management. Domain management relates to a specific service or market 'domain,'and its associated operational support requirements. It supports a companies definition of its business model, which drives the definition of each domain. It also attempts to maximize current investment while injecting new technology available in a practical approach. The following paragraphs offer an overview of legacy systems, standards-based philosophy, and the potential of domain management to help bridge the gap between the two types of systems.

Spanish high level radioactive waste management system issues

International Nuclear Information System (INIS)

Ulibarri, A.; Veganzones, A.

1993-01-01

The Empresa Nacional de Residuous Radiactivos, S.A. (ENRESA) was set up in 1984 as a state-owned limited liability company to be responsible for the management of all kinds of radioactive wastes in Spain. This paper provides an overview of the strategy and main lines of action stated in the third General Radioactive Waste Plan, currently in force, for the management of spent nuclear fuel and high-level wastes, as well as an outline of the main related projects, either being developed or foreseen. Aspects concerning the organizational structure, the economic and financing system and the international co-operational are also included

Users manual data base MATSURV. Reactor pressure vessel material surveillance data management system

International Nuclear Information System (INIS)

Kenworthy, L.D.; Tether, C.D.

1980-02-01

This Users Guide to the data management system MATSURV has been prepared to assist the user in all facets of the task of processing data related to reactor pressure vessel materials surveillance; preparation of raw data for input, input of data, modification of existing data, retrieval and display of data, and the creation of data reports. MATSURV is structured upon the System 2000 data base management system which is maintained on the IBM 370/168 computer at National Institutes of Health. An overview of System 2000 is provided

An overview of radioactive waste management in the United States of America

International Nuclear Information System (INIS)

Luik, A.E. van

1991-01-01

The U.S. radioactive waste management program is implemented by the U.S. Department of Energy (U.S. DOE) for high-level radioactive wastes and spent nuclear fuel; defense-related transuranic wastes; and U.S. DOE-generated low-level and mixed wastes. The various states are responsible for the disposal of civilian low-level wastes. Selected radioactive waste management and disposal topics will be overviewed, followed by a more detailed discussion of the high-level and low-level waste disposal regulatory framework and some issues involved in showing compliance with the applicable regulations. (author)

The IAEA's Net Enabled Waste Management Database: Overview and current status

International Nuclear Information System (INIS)

Csullog, G.W.; Bell, M.J.; Pozdniakov, I.; Petison, G.; Kostitsin, V.

2002-01-01

The IAEA's Net Enabled Waste Management Database (NEWMDB) contains information on national radioactive waste management programmes and organizations, plans and activities, relevant laws and regulations, policies and radioactive waste inventories. The NEWMDB, which was launched on the Internet on 6 July 2001, is the successor to the IAEA's Waste Management Database (WMDB), which was in use during the 1990's. The NEWMDB's first data collection cycle took place from July 2001 to March 2002. This paper provides an overview of the NEWMDB, it describes the results of the first data collection cycle, and it discusses the way forward for additional data collection cycles. Three companion papers describe (1) the role of the NEWMDB as an international source of information about radioactive waste management, (2) issues related to the variety of waste classification schemes used by IAEA Member States, and (3) the NEWMDB in the context of an indicator of sustainable development for radioactive waste management. (author)

PROSPECTIVE PAYMENT SYSTEMS AND EVOLUTION OF MANAGEMENT CONTROL IN FRENCH HOSPITALS: AN OVERVIEW

Directory of Open Access Journals (Sweden)

Jérôme LARTIGAU

2013-11-01

Full Text Available This analysis aims at contributing to the debate by exploring recent changes in French public hospitals. It will try to show how a new financing system can entail deep changes inside the management architecture. The structuring of the management control function is still in gestation. In most hospitals surveyed, this function is still at its early stages. There is still a long way for management control in acquiring a real legitimacy, especially from professionals. A key to success lies in the ability of institutions to recruit (and retain a staff up to the current stakes, both able to overcome technical difficulties of the hospital management (including the T2A and place themselves in intermediation between medical and management logics.

Graphic overview system for DOE's effluent and environmental monitoring programs

International Nuclear Information System (INIS)

Burson, Z.G.; Elle, D.R.

1980-03-01

The Graphic Overview System is a compilation of photos, maps, overlays, and summary information of environmental programs and related data for each DOE site. The information consists of liquid and airborne effluent release points, on-site storage locations, monitoring locations, aerial survey results, population distributions, wind roses, and other related information. The relationships of different environmental programs are visualized through the use of colored overlays. Trends in monitoring data, effluent releases, and on-site storage data are also provided as a corollary to the graphic display of monitoring and release points. The results provide a working tool with which DOE management (headquarters and field offices) can place in proper perspective key aspects of all environmental programs and related data, and the resulting public impact of each DOE site

Database system for management of health physics and industrial hygiene records

International Nuclear Information System (INIS)

Murdoch, B. T.; Blomquist, J. A.; Cooke, R. H.; Davis, J. T.; Davis, T. M.; Dolecek, E. H.; Halka-Peel, L.; Johnson, D.; Keto, D. N.; Reyes, L. R.; Schlenker, R. A.; Woodring; J. L.

1999-01-01

This paper provides an overview of the Worker Protection System (WPS), a client/server, Windows-based database management system for essential radiological protection and industrial hygiene. Seven operational modules handle records for external dosimetry, bioassay/internal dosimetry, sealed sources, routine radiological surveys, lasers, workplace exposure, and respirators. WPS utilizes the latest hardware and software technologies to provide ready electronic access to a consolidated source of worker protection

A context management system for a cost-efficient smart home platform

OpenAIRE

J. Schneider; A. Klein; C. Mannweiler; H. D. Schotten

2012-01-01

This paper presents an overview of state-of-the-art architectures for integrating wireless sensor and actuators networks into the Future Internet. Furthermore, we will address advantages and disadvantages of the different architectures. With respect to these criteria, we develop a new architecture overcoming these weaknesses. Our system, called Smart Home Context Management System, will be used for intelligent home utilities, appliances, and electronics and includes physical...

A System for Managing Critical Knowledge for Accelerator Subsystems: Pansophy

International Nuclear Information System (INIS)

C. Reece; V. Bookwalter; B. Madre

2001-01-01

Accelerator development and construction projects often intentionally push the envelope of well-established technical performance and manageable complexity. In addition, the desire for efficient retention and exploitation of accumulated experience across the multi-decade life cycles of major installations calls for a robust, yet user-friendly knowledge management system. To meet these needs, we are presently deploying a new web-based system at Jefferson Lab: Pansophy. This system is a custom integration of several commercial software utilities, DocushareTM, ColdFusionTM, MatlabTM, IngresTM, and common desktop programs. Users of the system range from process managers, shop-floor technicians, test engineers, to after-the-fact data miners and operations staff. The system integrates important QA elements of procedural control, automated data accumulation into a secured central database, prompt and reliable data query and retrieval, and online analysis tools, all accessed by the user via their platform-independent web browser. A system overview, completed pilot project, and implementation experience to date will be presented

Quarterly overviews of thermal solar energy systems 1993

International Nuclear Information System (INIS)

Warmerdam, J.M.; Stap, C.A.M.

1994-08-01

The title overviews were compiled to support the market introduction campaign for solar water heaters in the Netherlands. Use has been made of the data-banks of the Dutch subsidy administrator 'Senter'. 88% of the 1,883 systems, that were installed in 1993, are solar water heaters. Considering the solar collector surface the largest contribution is from the use of mainly uncovered collectors in swimming pools: 51% (37% for the collector surface of solar water heaters). Energy utilities are involved in the installation of 70% of the solar heating systems (even 77% for the solar water heaters). Next to the quarterly overviews, the subsidy data for the period 1988 up to and including 1993 are analyzed. 70% of the installed systems has been purchased and 30% was rented. At the end of 1993 preparations were made to install more than 3,000 solar boilers in 1994 and 1995. 3 figs., 21 tabs

Managing adaptively for multifunctionality in agricultural systems.

Science.gov (United States)

Hodbod, Jennifer; Barreteau, Olivier; Allen, Craig; Magda, Danièle

2016-12-01

The critical importance of agricultural systems for food security and as a dominant global landcover requires management that considers the full dimensions of system functions at appropriate scales, i.e. multifunctionality. We propose that adaptive management is the most suitable management approach for such goals, given its ability to reduce uncertainty over time and support multiple objectives within a system, for multiple actors. As such, adaptive management may be the most appropriate method for sustainably intensifying production whilst increasing the quantity and quality of ecosystem services. However, the current assessment of performance of agricultural systems doesn't reward ecosystem service provision. Therefore, we present an overview of the ecosystem functions agricultural systems should and could provide, coupled with a revised definition for assessing the performance of agricultural systems from a multifunctional perspective that, when all satisfied, would create adaptive agricultural systems that can increase production whilst ensuring food security and the quantity and quality of ecosystem services. The outcome of this high level of performance is the capacity to respond to multiple shocks without collapse, equity and triple bottom line sustainability. Through the assessment of case studies, we find that alternatives to industrialized agricultural systems incorporate more functional goals, but that there are mixed findings as to whether these goals translate into positive measurable outcomes. We suggest that an adaptive management perspective would support the implementation of a systematic analysis of the social, ecological and economic trade-offs occurring within such systems, particularly between ecosystem services and functions, in order to provide suitable and comparable assessments. We also identify indicators to monitor performance at multiple scales in agricultural systems which can be used within an adaptive management framework to increase

Managing adaptively for multifunctionality in agricultural systems

Science.gov (United States)

Hodbod, Jennifer; Barreteau, Olivier; Allen, Craig R.; Magda, Danièle

2016-01-01

The critical importance of agricultural systems for food security and as a dominant global landcover requires management that considers the full dimensions of system functions at appropriate scales, i.e. multifunctionality. We propose that adaptive management is the most suitable management approach for such goals, given its ability to reduce uncertainty over time and support multiple objectives within a system, for multiple actors. As such, adaptive management may be the most appropriate method for sustainably intensifying production whilst increasing the quantity and quality of ecosystem services. However, the current assessment of performance of agricultural systems doesn’t reward ecosystem service provision. Therefore, we present an overview of the ecosystem functions agricultural systems should and could provide, coupled with a revised definition for assessing the performance of agricultural systems from a multifunctional perspective that, when all satisfied, would create adaptive agricultural systems that can increase production whilst ensuring food security and the quantity and quality of ecosystem services. The outcome of this high level of performance is the capacity to respond to multiple shocks without collapse, equity and triple bottom line sustainability. Through the assessment of case studies, we find that alternatives to industrialized agricultural systems incorporate more functional goals, but that there are mixed findings as to whether these goals translate into positive measurable outcomes. We suggest that an adaptive management perspective would support the implementation of a systematic analysis of the social, ecological and economic trade-offs occurring within such systems, particularly between ecosystem services and functions, in order to provide suitable and comparable assessments. We also identify indicators to monitor performance at multiple scales in agricultural systems which can be used within an adaptive management framework to

Process Control System Cyber Security Standards - An Overview

Energy Technology Data Exchange (ETDEWEB)

Robert P. Evans

2006-05-01

The use of cyber security standards can greatly assist in the protection of process control systems by providing guidelines and requirements for the implementation of computer-controlled systems. These standards are most effective when the engineers and operators, using the standards, understand what each standard addresses. This paper provides an overview of several standards that deal with the cyber security of process measurements and control systems.

Control system devices : architectures and supply channels overview.

Energy Technology Data Exchange (ETDEWEB)

Trent, Jason; Atkins, William Dee; Schwartz, Moses Daniel; Mulder, John C.

2010-08-01

This report describes a research project to examine the hardware used in automated control systems like those that control the electric grid. This report provides an overview of the vendors, architectures, and supply channels for a number of control system devices. The research itself represents an attempt to probe more deeply into the area of programmable logic controllers (PLCs) - the specialized digital computers that control individual processes within supervisory control and data acquisition (SCADA) systems. The report (1) provides an overview of control system networks and PLC architecture, (2) furnishes profiles for the top eight vendors in the PLC industry, (3) discusses the communications protocols used in different industries, and (4) analyzes the hardware used in several PLC devices. As part of the project, several PLCs were disassembled to identify constituent components. That information will direct the next step of the research, which will greatly increase our understanding of PLC security in both the hardware and software areas. Such an understanding is vital for discerning the potential national security impact of security flaws in these devices, as well as for developing proactive countermeasures.

An overview of municipal solid waste management in China

International Nuclear Information System (INIS)

Chen Xudong; Geng Yong; Fujita, Tsuyoshi

2010-01-01

Municipal solid waste management (MSWM) in China warrants particular attention as China has become the largest MSW generator in the world and the total amount of MSW it produces continues to increase. In recent years, central and local governments have made great efforts to improve MSWM in China. New regulations and policies have been issued, urban infrastructure has been improved, and commercialization and international cooperation have been encouraged. Considering these developments, an overview is necessary to analyze the current state as well as new opportunities and challenges regarding MSWM in China. This paper shows that since the late 1990s, the amount of MSW collected has been largely decoupled from economic growth and incineration has become an increasingly widespread treatment method for MSW. We identify and discuss four major challenges and barriers related to China's MSWM, and propose an integrated management framework to improve the overall eco-efficiency of MSWM.

Materials management information systems.

Science.gov (United States)

1996-01-01

The hospital materials management function--ensuring that goods and services get from a source to an end user--encompasses many areas of the hospital and can significantly affect hospital costs. Performing this function in a manner that will keep costs down and ensure adequate cash flow requires effective management of a large amount of information from a variety of sources. To effectively coordinate such information, most hospitals have implemented some form of materials management information system (MMIS). These systems can be used to automate or facilitate functions such as purchasing, accounting, inventory management, and patient supply charges. In this study, we evaluated seven MMISs from seven vendors, focusing on the functional capabilities of each system and the quality of the service and support provided by the vendor. This Evaluation is intended to (1) assist hospitals purchasing an MMIS by educating materials managers about the capabilities, benefits, and limitations of MMISs and (2) educate clinical engineers and information system managers about the scope of materials management within a healthcare facility. Because software products cannot be evaluated in the same manner as most devices typically included in Health Devices Evaluations, our standard Evaluation protocol was not applicable for this technology. Instead, we based our ratings on our observations (e.g., during site visits), interviews we conducted with current users of each system, and information provided by the vendor (e.g., in response to a request for information [RFI]). We divided the Evaluation into the following sections: Section 1. Responsibilities and Information Requirements of Materials Management: Provides an overview of typical materials management functions and describes the capabilities, benefits, and limitations of MMISs. Also includes the supplementary article, "Inventory Cost and Reimbursement Issues" and the glossary, "Materials Management Terminology." Section 2. The

Workflow management: an overview

NARCIS (Netherlands)

Ouyang, C.; Adams, M.; Wynn, M.T.; Hofstede, ter A.H.M.; Brocke, vom J.; Rosemann, M.

2010-01-01

Workflow management has its origin in the office automation systems of the seventies, but it is not until fairly recently that conceptual and technological breakthroughs have led to its widespread adoption. In fact, nowadays, processawareness has become an accepted and integral part of various types

Risk management communication system between a local government and residents using several network systems and terminal devices

Science.gov (United States)

Ohyama, Takashi; Enomoto, Hiroyuki; Takei, Yuichiro; Maeda, Yuji

2009-05-01

Most of Japan's local governments utilize municipal disaster-management radio communications systems to communicate information on disasters or terrorism to residents. The national government is progressing in efforts toward digitalization by local governments of these systems, but only a small number (approx. 10%) have introduced such equipment due to its requiring large amounts of investment. On the other hand, many local governments are moving forward in installation of optical fiber networks for the purpose of eliminating the "digital divide." We herein propose a communication system as an alternative or supplement to municipal disaster-management radio communications systems, which utilizes municipal optical fiber networks, the internet and similar networks and terminals. The system utilizes the multiple existing networks and is capable of instantly distributing to all residents, and controlling, risk management information. We describe the system overview and the field trials conducted with a local government using this system.

Computerized management report system for monitoring manpower and cost

International Nuclear Information System (INIS)

Bullington, V.R.; Stephenson, R.L.; Cardwell, R.G.

1980-04-01

Although most cost systems offer complete detail and traceability, not all provide timely detail in a concise form useful to senior management. This system was developed for a multifunction research organization funded from many sources. It extracts cost and manpower data from the general cost systems, summarizes it, compares it by program with previous cost periods, and presents it with minimum detail yet with maximum overview. The system monitors the basic manpower distribution of effort at the source, that is, the division time-card input. Cost data are taken from the central computer ahead of the print-out and report-distribution steps; thus, the summary information is available several days ahead of the detailed reports. This procedure has been regularly used for several months, and has proven to be a valuable tool in management action and planning. 9 figures

Overview of the COMPASS CODAC system

International Nuclear Information System (INIS)

Hron, M.; Janky, F.; Pipek, J.; Sousa, J.; Carvalho, B.B.; Fernandes, H.; Vondracek, P.; Cahyna, P.; Urban, J.; Paprok, R.

2014-01-01

Highlights: • Overview of the Control, Data Acquisition, and Communication system (CODAC) on the COMPASS tokamak. • Set-up of CODAC hardware, software implementation, and communication tools. • Feedback control of COMPASS plasma using the MARTe framework. • Actuators, data sources, and data acquisition systems employed on COMPASS. • Communication links and protocols used within the COMPASS CODAC. - Abstract: This paper presents an overview of the Control, Data Acquisition, and Communication system (CODAC) at the COMPASS tokamak: the hardware set-up, software implementation, and communication tools are described. The diagnostics and the data acquisition are tailored for high spatial and temporal resolution required by the COMPASS physics programme, which aims namely at studies of the plasma edge, pedestal, and Scrape-off-Layer (SOL). Studies of instabilities and turbulence are also an integral part of the programme. Therefore, the data acquisition consists of more than 1000 channels, sampled at rates from 500 kS/s up to 2 GS/s. Presently, the feedback system controls the plasma position and shape, plasma current, and density and it includes 32 analogue input channels as well as 1 digital input/output channel and 8 analogue outputs. The feedback control runs within the Multi-threaded Application Real-Time executor (MARTe) framework with two threads, a 500 μs cycle to control slow systems and a 50 μs cycle to control the fast feedback power supplies for plasma position control. In this paper, special attention is paid to the links between the systems, to the hardware and software connections, and to the communication. The hardware part is described, the software framework is addressed, and the particular implementation – the dedicated software modules, communication protocols, and links to the database are described

Overview of the COMPASS CODAC system

Energy Technology Data Exchange (ETDEWEB)

Hron, M., E-mail: mhron@seznam.cz [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Praha 8 (Czech Republic); Janky, F. [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Praha 8 (Czech Republic); Department of Surface and Plasma Science, Faculty of Mathematics and Physics, Charles University in Prague, V Holešovičkách 2, 180 00 Praha 8 (Czech Republic); Pipek, J. [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Praha 8 (Czech Republic); Sousa, J.; Carvalho, B.B.; Fernandes, H. [Associação EURATOM/IST, Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa (Portugal); Vondracek, P. [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Praha 8 (Czech Republic); Department of Surface and Plasma Science, Faculty of Mathematics and Physics, Charles University in Prague, V Holešovičkách 2, 180 00 Praha 8 (Czech Republic); Cahyna, P.; Urban, J. [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Praha 8 (Czech Republic); Paprok, R. [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Praha 8 (Czech Republic); Department of Surface and Plasma Science, Faculty of Mathematics and Physics, Charles University in Prague, V Holešovičkách 2, 180 00 Praha 8 (Czech Republic); and others

2014-03-15

Highlights: • Overview of the Control, Data Acquisition, and Communication system (CODAC) on the COMPASS tokamak. • Set-up of CODAC hardware, software implementation, and communication tools. • Feedback control of COMPASS plasma using the MARTe framework. • Actuators, data sources, and data acquisition systems employed on COMPASS. • Communication links and protocols used within the COMPASS CODAC. - Abstract: This paper presents an overview of the Control, Data Acquisition, and Communication system (CODAC) at the COMPASS tokamak: the hardware set-up, software implementation, and communication tools are described. The diagnostics and the data acquisition are tailored for high spatial and temporal resolution required by the COMPASS physics programme, which aims namely at studies of the plasma edge, pedestal, and Scrape-off-Layer (SOL). Studies of instabilities and turbulence are also an integral part of the programme. Therefore, the data acquisition consists of more than 1000 channels, sampled at rates from 500 kS/s up to 2 GS/s. Presently, the feedback system controls the plasma position and shape, plasma current, and density and it includes 32 analogue input channels as well as 1 digital input/output channel and 8 analogue outputs. The feedback control runs within the Multi-threaded Application Real-Time executor (MARTe) framework with two threads, a 500 μs cycle to control slow systems and a 50 μs cycle to control the fast feedback power supplies for plasma position control. In this paper, special attention is paid to the links between the systems, to the hardware and software connections, and to the communication. The hardware part is described, the software framework is addressed, and the particular implementation – the dedicated software modules, communication protocols, and links to the database are described.

Overview of the Italian activities in the field of life management of nuclear power plants

International Nuclear Information System (INIS)

Pini, A.

1994-01-01

Overview of the Italian activities in the field of life management of nuclear power plants is presented, including the following issues: nuclear energy scenario in Italy, study of reactor pressure vessel, piping and containment integrity, seismic risk analysis

Overview of the plant risk status information management system

International Nuclear Information System (INIS)

Kirchner, J.R.; Campbell, D.J.

1987-01-01

The Plant Risk Status Information Management System (PRISIM) is a personal computer program that presents PRA results and related information for use by decision-makers. The program was originally developed for NRC inspectors, but now an expanded version of the program with more potential applications is complete. Prototypes of both versions have been developed for Arkansas Nuclear One - Unit 1, and the inspection-related version is currently being field-tested. Interim results of these field tests are favorable. The PRISIM database contains both pre-processed information that is useful for long-term planning and a plant risk model for assessing the risk implications of the current plant status. The program provides rapid access to specific information by making extensive use of menus. Development of PRISIM programs for Peach Bottom-Unit 2 is underway, and there are plans to create programs for other plants

Overview of NoSQL and comparison with SQL database ...

African Journals Online (AJOL)

Overview of NoSQL and comparison with SQL database management systems. ... Abstract. The increasing need for space in the database community has caused the revolution named NoSQL ‗Not Only SQL'. ... HOW TO USE AJOL.

Advanced Transport Operating System (ATOPS) Flight Management/Flight Controls (FM/FC) software description

Science.gov (United States)

Wolverton, David A.; Dickson, Richard W.; Clinedinst, Winston C.; Slominski, Christopher J.

1993-01-01

The flight software developed for the Flight Management/Flight Controls (FM/FC) MicroVAX computer used on the Transport Systems Research Vehicle for Advanced Transport Operating Systems (ATOPS) research is described. The FM/FC software computes navigation position estimates, guidance commands, and those commands issued to the control surfaces to direct the aircraft in flight. Various modes of flight are provided for, ranging from computer assisted manual modes to fully automatic modes including automatic landing. A high-level system overview as well as a description of each software module comprising the system is provided. Digital systems diagrams are included for each major flight control component and selected flight management functions.

Towards an Ultimate Battery Thermal Management System

DEFF Research Database (Denmark)

Khan, Mohammad Rezwan; Swierczynski, Maciej Jozef; Kær, Søren Knudsen

2017-01-01

The prevailing standards and scientific literature offer a wide range of options for the construction of a battery thermal management system (BTMS). The design of an innovative yet well-functioning BTMS requires strict supervision, quality audit and continuous improvement of the whole process....... It must address all the current quality and safety (Q&S) standards. In this review article, an effective battery thermal management is sought considering the existing battery Q&S standards and scientific literature. The article contains a broad overview of the current existing standards and literature...... on a generic compliant BTMS. The aim is to assist in the design of a novel compatible BTMS. Additionally, the article delivers a set of recommendations to make an effective BTMS....

Integrated Work Management: Overview, Course 31881

Energy Technology Data Exchange (ETDEWEB)

Simpson, Lewis Edward [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-06-30

Integrated work management (IWM) is the process used for formally implementing the five-step process associated with integrated safety management (ISM) and integrated safeguards and security management (ISSM) at Los Alamos National Laboratory (LANL). IWM also directly supports the LANL Environmental Management System (EMS). IWM helps all workers and managers perform work safely and securely and in a manner that protects people, the environment, property, and the security of the nation. The IWM process applies to all work activities at LANL, from working in the office to designing experiments to assembling and detonating explosives. The primary LANL document that establishes and describes IWM requirements is Procedure (P) 300, Integrated Work Management.

Diesel engine management systems and components

CERN Document Server

2014-01-01

This reference book provides a comprehensive insight into todays diesel injection systems and electronic control. It focusses on minimizing emissions and exhaust-gas treatment. Innovations by Bosch in the field of diesel-injection technology have made a significant contribution to the diesel boom. Calls for lower fuel consumption, reduced exhaust-gas emissions and quiet engines are making greater demands on the engine and fuel-injection systems. Contents History of the diesel engine.- Areas of use for diesel engines.- Basic principles of the diesel engine.- Fuels: Diesel fuel.- Fuels: Alternative fuels.- Cylinder-charge control systems.- Basic principles of diesel fuel-injection.- Overview of diesel fuel-injection systems.- Fuel supply to the low pressure stage.- Overview of discrete cylinder systems.- Unit injector system.- Unit pump system.- Overview of common-rail systems.- High pressure components of the common-rail system.- Injection nozzles.- Nozzle holders.- High pressure lines.- Start assist systems.-...

An Overview of Information Technology Tools Implementation in Supply Chain Management

OpenAIRE

Mahadi Hasan Miraz; Md. Mamun Habib; Mohammad Shahansha Molla

2016-01-01

Information Technology (IT) and its usage in administrations and across the supply chain has develop a factor of competitive benefit for numerous companies. This paper focuses the practice of IT tools for Supply Chain Management (SCM) [10]. It also highlights the impact of IT in helping to rearrange the whole delivery set up to accomplish advanced service levels and lower inventory and lower supply chain charges [10]. An overview and perceptible benefits of the present IT tools that are exten...

International safeguards data management system. System description: Version 1.1.; Release PLI 82

International Nuclear Information System (INIS)

Argentesi, T.; Casilli, T.; Costantini, L.; Dondi, M.G.; Franklin, M.

1982-01-01

This document describes a nuclear material accountancy system which has been developed using the ADABAS data base management system and is implemented on the JRC-Ispra computer. Throughout the report, the data base system is referred to as ''ISADAM'', i.e. International Safeguards Data Management System. The system provides tools for a safeguards authority to decide whether an operators MUF (Material Unaccounted For) can be accounted for as an accumulation of operator measurement errors. The principle objective of the applications programs described here is to provide a variance analysis of MUF in which the variance of MUF is computed as a function of the accounting declarations and the error characteristics of the operator measurement system. A overview of ISADAM is presented; then, a detailed description of the processing applied by the system is given. A description of the parameter information required by the four autonomous programs ISADAM is presented. In developing ISADAM, one of the prime factors taken into consideration was the ease with which it could be used

From Millennium ERM to Proquest 360 Resource Manager: Implementing a new Electronic Resources Management System ERMS in an International Graduate Research University in Saudi Arabia

KAUST Repository

Ramli, Rindra M.

2017-01-01

An overview of the Recommendation Study and the subsequent Implementation of a new Electronic Resources Management system ERMS in an international graduate research university in the Kingdom of Saudi Arabia. It covers the timeline, deliverables

Waste Generation Overview Refresher, Course 21464

Energy Technology Data Exchange (ETDEWEB)

Simpson, Lewis Edward [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-12-13

This course, Waste Generation Overview Refresher (COURSE 21464), provides an overview of federal and state waste management regulations, as well as Los Alamos National Laboratory (LANL) policies and procedures for waste management operations. The course covers the activities involved in the cradle-to- grave waste management process and focuses on waste characterization, waste compatibility determinations and classification, and the storage requirements for temporary waste accumulation areas at LANL.

Technology for Space Station Evolution. Volume 3: EVA/Manned Systems/Fluid Management System

Science.gov (United States)

1990-01-01

NASA's Office of Aeronautics and Space Technology (OAST) conducted a workshop on technology for space station evolution 16-19 Jan. 1990 in Dallas, Texas. The purpose of this workshop was to collect and clarify Space Station Freedom technology requirements for evolution and to describe technologies that can potentially fill those requirements. These proceedings are organized into an Executive Summary and Overview and five volumes containing the Technology Discipline Presentations. Volume 3 consists of the technology discipline sections for Extravehicular Activity/Manned Systems and the Fluid Management System. For each technology discipline, there is a Level 3 subsystem description, along with the papers.

Financial Management in the Strategic Systems Project Office.

Science.gov (United States)

SSPO, the largest program office in the Navy and in existence for over 20 years, has perfected time tested financial management procedures which may...serve as a model for the student of program management. This report presents an overview of the SSPO financial management concepts and general

Overview of real-time operating systems on microprocessor platforms

International Nuclear Information System (INIS)

Luong, T.T.

1994-01-01

This paper attempts to overview the real-time operating systems on microprocessor platforms in the field of experimental physics facility controls. The key issues regarding operating systems as well as standards and development environment are discussed. As an illustration, some current industrial products are indicated. Also, real-time systems operating in some institutes of the EPS/EPCS inter divisional group are reviewed. (author). 3 refs., 4 figs

Title IV Cash Management Life Cycle Training. Participant's Guide.

Science.gov (United States)

Department of Education, Washington, DC.

This participant's guide includes: "Introduction: Welcome to Cash Management Life Cycle Training"; "Module 1: Review of Cash Management Principles" (cash management overview and activity); "Module 2: Common Origination and Disbursement (COD) System Overview" (e.g., full participants and phase-in participants, COD…

Managing environmental radioactivity monitoring data: a geographic information system approach

International Nuclear Information System (INIS)

Heywood, I.; Cornelius, S.

1993-01-01

An overview of the current British approach to environmental radiation monitoring is presented here, followed by a discussion of the major issues which would have to be considered in formulating a geographical information system (GIS) for the management of radiation monitoring data. Finally, examples illustrating the use of spatial data handling and automated cartographic techniques are provided from work undertaken by the authors. These examples are discussed in the context of developing a National Radiological Spatial Information System (NRSIS) demonstrator utilising GIS technology. (Author)

Expert systems as applied to bridges and pavements : an overview.

Science.gov (United States)

1986-01-01

Expert systems is a rapidly emerging new application of computers to aid decision makers in solving problems. This report gives an overview of what expert systems are and of what use they may be to a transportation department. The focus of the applic...

Glance Information System for ATLAS Management

International Nuclear Information System (INIS)

Grael, F F; Maidantchik, C; Évora, L H R A; Karam, K; Moraes, L O F; Cirilli, M; Nessi, M; Pommès, K

2011-01-01

ATLAS Experiment is an international collaboration where more than 37 countries, 172 institutes and laboratories, 2900 physicists, engineers, and computer scientists plus 700 students participate. The management of this teamwork involves several aspects such as institute contribution, employment records, members' appointment, authors' list, preparation and publication of papers and speakers nomination. Previously, most of the information was accessible by a limited group and developers had to face problems such as different terminology, diverse data modeling, heterogeneous databases and unlike users needs. Moreover, the systems were not designed to handle new requirements. The maintenance has to be an easy task due to the long lifetime experiment and professionals turnover. The Glance system, a generic mechanism for accessing any database, acts as an intermediate layer isolating the user from the particularities of each database. It retrieves, inserts and updates the database independently of its technology and modeling. Relying on Glance, a group of systems were built to support the ATLAS management and operation aspects: ATLAS Membership, ATLAS Appointments, ATLAS Speakers, ATLAS Analysis Follow-Up, ATLAS Conference Notes, ATLAS Thesis, ATLAS Traceability and DSS Alarms Viewer. This paper presents the overview of the Glance information framework and describes the privilege mechanism developed to grant different level of access for each member and system.

Glance Information System for ATLAS Management

Science.gov (United States)

Grael, F. F.; Maidantchik, C.; Évora, L. H. R. A.; Karam, K.; Moraes, L. O. F.; Cirilli, M.; Nessi, M.; Pommès, K.; ATLAS Collaboration

2011-12-01

ATLAS Experiment is an international collaboration where more than 37 countries, 172 institutes and laboratories, 2900 physicists, engineers, and computer scientists plus 700 students participate. The management of this teamwork involves several aspects such as institute contribution, employment records, members' appointment, authors' list, preparation and publication of papers and speakers nomination. Previously, most of the information was accessible by a limited group and developers had to face problems such as different terminology, diverse data modeling, heterogeneous databases and unlike users needs. Moreover, the systems were not designed to handle new requirements. The maintenance has to be an easy task due to the long lifetime experiment and professionals turnover. The Glance system, a generic mechanism for accessing any database, acts as an intermediate layer isolating the user from the particularities of each database. It retrieves, inserts and updates the database independently of its technology and modeling. Relying on Glance, a group of systems were built to support the ATLAS management and operation aspects: ATLAS Membership, ATLAS Appointments, ATLAS Speakers, ATLAS Analysis Follow-Up, ATLAS Conference Notes, ATLAS Thesis, ATLAS Traceability and DSS Alarms Viewer. This paper presents the overview of the Glance information framework and describes the privilege mechanism developed to grant different level of access for each member and system.

Rocket Testing and Integrated System Health Management

Science.gov (United States)

Figueroa, Fernando; Schmalzel, John

2005-01-01

Integrated System Health Management (ISHM) describes a set of system capabilities that in aggregate perform: determination of condition for each system element, detection of anomalies, diagnosis of causes for anomalies, and prognostics for future anomalies and system behavior. The ISHM should also provide operators with situational awareness of the system by integrating contextual and timely data, information, and knowledge (DIaK) as needed. ISHM capabilities can be implemented using a variety of technologies and tools. This chapter provides an overview of ISHM contributing technologies and describes in further detail a novel implementation architecture along with associated taxonomy, ontology, and standards. The operational ISHM testbed is based on a subsystem of a rocket engine test stand. Such test stands contain many elements that are common to manufacturing systems, and thereby serve to illustrate the potential benefits and methodologies of the ISHM approach for intelligent manufacturing.

Overview and Demonstration of USEPA’s Risk-Informed Materials Management (RIMM) Tool System

Science.gov (United States)

The Risk-Informed Materials Management (RIMM) Tool System is a data gathering and analysis platform for conducting material disposal and beneficial use assessments. Users can evaluate risks to human and ecological receptors associated with exposures to organic and inorganic chemi...

Micro-system inertial sensing technology overview.

Energy Technology Data Exchange (ETDEWEB)

Allen, James Joe

2009-02-01

The purpose of this report is to provide an overview of Micro-System technology as it applies to inertial sensing. Transduction methods are reviewed with capacitance and piezoresistive being the most often used in COTS Micro-electro-mechanical system (MEMS) inertial sensors. Optical transduction is the most recent transduction method having significant impact on improving sensor resolution. A few other methods are motioned which are in a R&D status to hopefully allow MEMS inertial sensors to become viable as a navigation grade sensor. The accelerometer, gyroscope and gravity gradiometer are the type of inertial sensors which are reviewed in this report. Their method of operation and a sampling of COTS sensors and grade are reviewed as well.

Chapter 6: quantifying greenhouse gas sources and sinks in managed forest systems

Science.gov (United States)

Coeli Hoover; Richard Birdsey; Bruce Goines; Peter Lahm; Yongming Fan; David Nowak; Stephen Prisley; Elizabeth Reinhardt; Ken Skog; David Skole; James Smith; Carl Trettin; Christopher. Woodall

2014-01-01

This chapter provides guidance for reporting greenhouse gas (GHG) emissions associated with entity-level fluxes from the forestry sector. In particular, it focuses on methods for estimating carbon stocks and stock change from managed forest systems. Section 6.1 provides an overview of the sector. Section 6.2 describes the methods for forest carbon stock accounting....

Data management and data enrichment for systems biology projects.

Science.gov (United States)

Wittig, Ulrike; Rey, Maja; Weidemann, Andreas; Müller, Wolfgang

2017-11-10

Collecting, curating, interlinking, and sharing high quality data are central to de.NBI-SysBio, the systems biology data management service center within the de.NBI network (German Network for Bioinformatics Infrastructure). The work of the center is guided by the FAIR principles for scientific data management and stewardship. FAIR stands for the four foundational principles Findability, Accessibility, Interoperability, and Reusability which were established to enhance the ability of machines to automatically find, access, exchange and use data. Within this overview paper we describe three tools (SABIO-RK, Excemplify, SEEK) that exemplify the contribution of de.NBI-SysBio services to FAIR data, models, and experimental methods storage and exchange. The interconnectivity of the tools and the data workflow within systems biology projects will be explained. For many years we are the German partner in the FAIRDOM initiative (http://fair-dom.org) to establish a European data and model management service facility for systems biology. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Implementation of a quality management system at the PHOENIX facility (CryoMaK)

International Nuclear Information System (INIS)

Urbach, Elisabeth; Bagrets, Nadezda; Weiss, Klaus-Peter

2013-01-01

Within a variety of mechanical tests in the Cryogenic Material Test Facility Karlsruhe (CryoMaK) at Karlsruhe Institute of Technology (KIT) the PHOENIX facility was prepared for multiple standard tensile tests in liquid helium, liquid nitrogen and at room temperature. With the multiple specimens holder 10 specimens can be tested within one cool down one after another. A quality management system is needed for ensuring reproducible preconditions. For the guarantee of the competence of the laboratory and the measurement equipment, a quality management system was implemented and prepared for accreditation according to DIN EN ISO/IEC 17025 (ISO 17025). The implementation of a quality management system allows high precision test results included the estimation of measurement uncertainty. This paper gives an overview of the management and technical requirements for the accreditation of the PHOENIX testing facility

Implementation of a quality management system at the PHOENIX facility (CryoMaK)

Energy Technology Data Exchange (ETDEWEB)

Urbach, Elisabeth, E-mail: elisabeth.urbach@kit.edu; Bagrets, Nadezda; Weiss, Klaus-Peter

2013-10-15

Within a variety of mechanical tests in the Cryogenic Material Test Facility Karlsruhe (CryoMaK) at Karlsruhe Institute of Technology (KIT) the PHOENIX facility was prepared for multiple standard tensile tests in liquid helium, liquid nitrogen and at room temperature. With the multiple specimens holder 10 specimens can be tested within one cool down one after another. A quality management system is needed for ensuring reproducible preconditions. For the guarantee of the competence of the laboratory and the measurement equipment, a quality management system was implemented and prepared for accreditation according to DIN EN ISO/IEC 17025 (ISO 17025). The implementation of a quality management system allows high precision test results included the estimation of measurement uncertainty. This paper gives an overview of the management and technical requirements for the accreditation of the PHOENIX testing facility.

Data management strategies for multinational large-scale systems biology projects.

Science.gov (United States)

Wruck, Wasco; Peuker, Martin; Regenbrecht, Christian R A

2014-01-01

Good accessibility of publicly funded research data is essential to secure an open scientific system and eventually becomes mandatory [Wellcome Trust will Penalise Scientists Who Don't Embrace Open Access. The Guardian 2012]. By the use of high-throughput methods in many research areas from physics to systems biology, large data collections are increasingly important as raw material for research. Here, we present strategies worked out by international and national institutions targeting open access to publicly funded research data via incentives or obligations to share data. Funding organizations such as the British Wellcome Trust therefore have developed data sharing policies and request commitment to data management and sharing in grant applications. Increased citation rates are a profound argument for sharing publication data. Pre-publication sharing might be rewarded by a data citation credit system via digital object identifiers (DOIs) which have initially been in use for data objects. Besides policies and incentives, good practice in data management is indispensable. However, appropriate systems for data management of large-scale projects for example in systems biology are hard to find. Here, we give an overview of a selection of open-source data management systems proved to be employed successfully in large-scale projects.

Environmental remediation and waste management information systems

Energy Technology Data Exchange (ETDEWEB)

Harrington, M.W.; Harlan, C.P.

1993-12-31

The purpose of this paper is to document a few of the many environmental information systems that currently exist worldwide. The paper is not meant to be a comprehensive list; merely a discussion of a few of the more technical environmental database systems that are available. Regulatory databases such as US Environmental Protection Agency`s (EPA`s) RODS (Records of Decision System) database [EPA, 1993] and cost databases such as EPA`s CORA (Cost of Remedial Action) database [EPA, 1993] are not included in this paper. Section 2 describes several US Department of Energy (DOE) Environmental Restoration and Waste Management (EM) information systems and databases. Section 3 discusses several US EPA information systems on waste sites and technologies. Section 4 summarizes a few of the European Community environmental information systems, networks, and clearinghouses. And finally, Section 5 provides a brief overview of Geographical Information Systems. Section 6 contains the references, and the Appendices contain supporting information.

Environmental remediation and waste management information systems

International Nuclear Information System (INIS)

Harrington, M.W.; Harlan, C.P.

1993-01-01

The purpose of this paper is to document a few of the many environmental information systems that currently exist worldwide. The paper is not meant to be a comprehensive list; merely a discussion of a few of the more technical environmental database systems that are available. Regulatory databases such as US Environmental Protection Agency's (EPA's) RODS (Records of Decision System) database [EPA, 1993] and cost databases such as EPA's CORA (Cost of Remedial Action) database [EPA, 1993] are not included in this paper. Section 2 describes several US Department of Energy (DOE) Environmental Restoration and Waste Management (EM) information systems and databases. Section 3 discusses several US EPA information systems on waste sites and technologies. Section 4 summarizes a few of the European Community environmental information systems, networks, and clearinghouses. And finally, Section 5 provides a brief overview of Geographical Information Systems. Section 6 contains the references, and the Appendices contain supporting information

The planned Alaska SAR Facility - An overview

Science.gov (United States)

Carsey, Frank; Weeks, Wilford

1987-01-01

The Alaska SAR Facility (ASF) is described in an overview fashion. The facility consists of three major components, a Receiving Ground System, a SAR Processing System and an Analysis and Archiving System; the ASF Program also has a Science Working Team and the requisite management and operations systems. The ASF is now an approved and fully funded activity; detailed requirements and science background are presented for the facility to be implemented for data from the European ERS-1, the Japanese ERS-1 and Radarsat.

An overview of the Radioisotope Thermoelectric Generator Transportation System Program

International Nuclear Information System (INIS)

McCoy, J.C.; Becker, D.L.

1996-01-01

Radioisotope Thermoelectric Generators (RTG) convert the heat generated by radioactive decay to electricity using thermocouples. RTGs have a long operating life, are reasonably lightweight, and require little or no maintenance once assembled and tested. These factors make RTGs particularly attractive for use in spacecraft. However, because RTGs contain significant quantities of radioactive materials, normally plutonium-238 and its decay products, they must be transported in packages built in accordance with Title 10, Code of Federal Regulations, Part 71. The U.S. Department of Energy assigned the Radioisotope Thermoelectric Generator Transportation System (RTGTS) Program to Westinghouse Hanford Company in 1988 to develop a system meeting the regulatory requirements. The program objective was to develop a transportation system that would fully comply with 10 CFR 71 while protecting RTGs from adverse environmental conditions during normal conditions of transport (e.g., shock and heat). The RTGTS is scheduled for completion in December 1996 and will be available to support the National Aeronautics and Space Administration close-quote s Cassini mission to Saturn in October 1997. This paper provides an overview of the RTGTS and discusses the hardware being produced. Additionally, various program management innovations mandated by recent major changes in the U.S. Department of Energy structure and resources will be outlined. copyright 1996 American Institute of Physics

An overview of the Radioisotope Thermoelectric Generator Transporation System Program

International Nuclear Information System (INIS)

McCoy, J.C.

1995-10-01

Radioisotope Thermoelectric Generators (RTG) convert the heat generated by radioactive decay to electricity using thermocouples. RTGs have a long operating life, are reasonably lightweight, and require little or no maintenance once assembled and tested. These factors make RTGs particularly attractive for use in spacecraft However, because RTGs contain significant quantities of radioactive materials, normally plutonium-238 and its decay products, they must be transported in packages built in accordance with Title 10, Code of Federal Regulations, Part 71. The US Department of Energy assigned the Radioisotope Thermoelectric Generator Transportation System (RTGTS) Program to Westinghouse Hanford Company in 1988 to develop a system meeting the regulatory requirements. The program objective was to develop a transportation system that would fully comply with 10 CFR 71 while protecting RTGs from adverse environmental conditions during normal conditions of transport (e.g., shock and heat). The RTGTS is scheduled for completion in December 1996 and will be available to support the National Aeronautics and Space Administrations Cassini mission to Saturn in October 1997. This paper provides an overview of the RTGTS and discusses the hardware being produced. Additionally, various program management innovations mandated by recent ma or changes in the US Department of Energy structure and resources will be outlined

Battery storage for PV power systems: an overview

Energy Technology Data Exchange (ETDEWEB)

Chaurey, A; Deambi, S [Tata Energy Research Inst., New Delhi (India)

1992-06-01

Batteries used in photovoltaic applications are required to have particular properties in order to minimize the system cost, in addition to meeting stringent reliability requirements associated with PV system installations. The battery sizing, installations, operation and maintenance, thus, are fundamentally different from those used in several other energy storage applications. The current paper gives an overview of battery systems commonly used in PV installation, as well as several new options which are found suitable or have been modified suitably to meet PV energy storage requirements. The systems are discussed briefly with respect to their construction, performance characteristics and compatibility with PV systems. The battery sizing procedures are also reviewed. (Author).

Cryptographic Key Management System

Energy Technology Data Exchange (ETDEWEB)

No, author

2014-02-21

This report summarizes the outcome of U.S. Department of Energy (DOE) contract DE-OE0000543, requesting the design of a Cryptographic Key Management System (CKMS) for the secure management of cryptographic keys for the energy sector infrastructure. Prime contractor Sypris Electronics, in collaboration with Oak Ridge National Laboratories (ORNL), Electric Power Research Institute (EPRI), Valicore Technologies, and Purdue University's Center for Education and Research in Information Assurance and Security (CERIAS) and Smart Meter Integration Laboratory (SMIL), has designed, developed and evaluated the CKMS solution. We provide an overview of the project in Section 3, review the core contributions of all contractors in Section 4, and discuss bene ts to the DOE in Section 5. In Section 6 we describe the technical construction of the CKMS solution, and review its key contributions in Section 6.9. Section 7 describes the evaluation and demonstration of the CKMS solution in different environments. We summarize the key project objectives in Section 8, list publications resulting from the project in Section 9, and conclude with a discussion on commercialization in Section 10 and future work in Section 11.

Overview of MPC applications in supply chains: Potential use and benefits in the management of forest-based supply chains

Directory of Open Access Journals (Sweden)

Tatiana M. Pinho

2015-12-01

Full Text Available Aim of study: This work aims to provide an overview of Model Predictive Controllers (MPC applications in supply chains, to describe the forest-based supply chain and to analyse the potential use and benefits of MPC in a case study concerning a biomass supply chain.Area of study: The proposed methods are being applied to a company located in Finland.Material and methods: Supply chains are complex systems where actions and partners’ coordination influence the whole system performance. The increase of competitiveness and need of quick responses to the costumers implies the use of efficient management techniques. The control theory, particularly MPC, has been successfully used as a supply chain management tool. MPC is able to deal with dynamic interactions between the partners and to globally optimize the supply chain performance in the presence of disturbances. However, as far as is authors’ knowledge, there are no applications of this methodology in the forest-based supply chains. This work proposes a control architecture to improve the performance of the forest supply chain. The controller is based on prediction models which are able to simulate the system and deal with disturbances.Main results: The preliminary results enable to evaluate the impacts of disturbances in the supply chain. Thus, it is possible to react beforehand, controlling the schedules and tasks’ allocation, or alert the planning level in order to generate a new plan.Research highlights:   Overview of MPC applications in supply chains; forest-based supply chain description; case study presentation: wood biomass supply chain for energy production; MPC architecture proposal to decrease the operation times.Keywords: biomass; forest; Model Predictive Control; planning; supply chain.

Design and practice of a comprehensively functional integrated management information system for major construction

Science.gov (United States)

Liu, Yuling; Wang, Xiaoping; Zhu, Yuhui; Fei, Lanlan

2017-08-01

This paper introduces a Comprehensively Functional Integrated Management Information System designed for the Optical Engineering Major by the College of Optical Science and Engineering, Zhejiang University, which combines the functions of teaching, students learning, educational assessment and management. The system consists of 5 modules, major overview, online curriculum, experiment teaching management, graduation project management and teaching quality feedback. The major overview module introduces the development history, training program, curriculums and experiment syllabus and teaching achievements of optical engineering major in Zhejiang University. The Management Information System is convenient for students to learn in a mobile and personalized way. The online curriculum module makes it very easy for teachers to setup a website for new curriculums. On the website, teachers can help students on their problems about the curriculums in time and collect their homework online. The experiment teaching management module and the graduation project management module enables the students to fulfill their experiment process and graduation thesis under the help of their supervisors. Before students take an experiment in the lab, they must pass the pre-experiment quiz on the corresponding module. After the experiment, students need to submit the experiment report to the web server. Moreover, the module contains experiment process video recordings, which are very helpful to improve the effect of the experiment education. The management of the entire process of a student's graduation program, including the project selection, mid-term inspection, progress report of every two weeks, final thesis, et al, is completed by the graduation project management module. The teaching quality feedback module is not only helpful for teachers to know whether the education effect of curriculum is good or not, but also helpful for the administrators of the college to know whether the

Cutaneous Scar Prevention and Management; Overview of current therapies

Directory of Open Access Journals (Sweden)

Sultan Al-Shaqsi

2016-02-01

Full Text Available Cutaneous scarring is common after trauma, surgery and infection and occurs when normal skin tissue is replaced by fibroblastic tissue during the healing process. The pathophysiology of scar formation is not yet fully understood, although the degree of tension across the wound edges and the speed of cell growth are believed to play central roles. Prevention of scars is essential and can be achieved by attention to surgical techniques and the use of measures to reduce cell growth. Grading and classifying scars is important to determine available treatment strategies. This article presents an overview of the current therapies available for the prevention and treatment of scars. It is intended to be a practical guide for surgeons and other health professionals involved with and interested in scar management.

Designing a fuzzy expert system for selecting knowledge management strategy

Directory of Open Access Journals (Sweden)

Ameneh Khadivar

2014-12-01

Full Text Available knowledge management strategy is mentioned as one of the most important success factors for implementing knowledge management. The KM strategy selection is a complex decision that requires consideration of several factors. For evaluation and selection of an appropriate knowledge management strategy in organizations, many factors must be considered. The identified factors and their impact on knowledge management strategy are inherently ambiguous. In this study, an overview of theoretical foundations of research regarding the different knowledge management strategies has been done And factors influencing the knowledge management strategy selection have been extracted from conceptual frameworks and models. How these factors influence the knowledge management strategy selection is extracted through the fuzzy Delphi. Next a fuzzy expert system for the selection of appropriate knowledge management strategy is designed with respect to factors that have an impact on knowledge management strategy. The factors which influence the selection of knowledge management strategy include: general business strategy, organizational structure, cultural factors, IT strategy, strategic human resource management, social level, the types of knowledge creation processes and release it. The factors which influence the knowledge management strategy selection include: business strategy general, organizational structure, cultural factors, IT strategy, human resource management strategies, socialization level, knowledge types and its creation and diffusion processes. According to identified factors which affect the knowledge management strategy, the final strategy is recommended based on the range of human-oriented and system-oriented by keep the balance of explicit and implicit knowledge. The Designed system performance is tested and evaluated by the information related to three Iranian organization.

An overview of actions concerning life management of nuclear power plants in Argentina

International Nuclear Information System (INIS)

Pochettino, A.A.

1995-01-01

An overview of actions concerning life management of nuclear power plants in Argentina is presented including the following issues: reorganization of nuclear activities in Argentina; life extension actions; main specific research and development actions (reactor pressure vessel integrity assessment project; reactor internal components project; heat exchanges project); other research and development actions (non-destructive testing developments; eddy current techniques; acoustic emission applications; materials; vibrations and fretting wear; reactor chemistry; control and instrumentation; probabilistic safety assessment)

An overview of the corrective action management unit and temporary unit regulations

International Nuclear Information System (INIS)

Green, D.R.; Corathers, L.; Coalgate, J.

1995-01-01

In February 1993, the US Environmental Protection Agency (EPA) promulgated the corrective action management unit (CAMU) and temporary unit (TU) regulations as 40 CFR Part 264, Subpart S. These regulations are intended to foster the selection of protective and cost-effective remedies for the restoration of sites contaminated by hazardous substances, hazardous wastes, and hazardous waste constituents by removing certain regulatory impediments to implementing those remedies, most notably those of the land disposal restrictions (LDRs). This paper provides a brief overview of the CAMU and TU regulations

Overview of the Hanford risk management plan

International Nuclear Information System (INIS)

Halverson, T.G.

1998-01-01

The Project Hanford Management Contract called for the enhancement of site-wide decision processes, and development of a Hanford Risk Management Plan to adopt or develop a risk management system for the Hanford Site. This Plan provides a consistent foundation for Site issues and addresses site-wide management of risks of all types. It supports the Department of Energy planning and sitewide decision making policy. Added to this requirement is a risk performance report to characterize the risk management accomplishments. This paper presents the development of risk management within the context of work planning and performance. Also discussed are four risk elements which add value to the context

The DIRAC Data Management System and the Gaudi dataset federation

CERN Document Server

Haen, Christophe; Frank, Markus; Tsaregorodtsev, Andrei

2015-01-01

The DIRAC Interware provides a development framework and a complete set of components for building distributed computing systems. The DIRAC Data Management System (DMS) offers all the necessary tools to ensure data handling operations for small and large user communities. It supports transparent access to storage resources based on multiple technologies, and is easily expandable. The information on data files and replicas is kept in a File Catalog of which DIRAC offers a powerful and versatile implementation (DFC). Data movement can be performed using third party services including FTS3. Bulk data operations are resilient with respect to failures due to the use of the Request Management System (RMS) that keeps track of ongoing tasks.In this contribution we will present an overview of the DIRAC DMS capabilities and its connection with other DIRAC subsystems such as the Transformation System. This paper also focuses on the DIRAC File Catalog, for which a lot of new developments have been carried out, so that LH...

Overview of DOE Radiation Exposure Information Reporting System (REIRS)

International Nuclear Information System (INIS)

Fix, J.J.; Briscoe, G.J.; Selby, J.M.; Vallario, E.J.

1981-05-01

The purpose of the study is to determine the adequacy of the present system, identify any necessary short-term improvements and propose feasible alternatives for an improved system. The study includes topical reports as follows: current Personnel Dosimetry Practices at DOE Facilities; overview of DOE Radiation Exposure Information Reporting System (REIRS); and alternatives to Provide Upgraded Occupational Exposure Record System. This study constitutes the second report and was a joint effort between Battelle Northwest and EG and G, Idaho Falls. EG and G has been responsible for the respository since the fall of 1978

From Millennium ERM to Proquest 360 Resource Manager: Implementing a new Electronic Resources Management System ERMS in an International Graduate Research University in Saudi Arabia

KAUST Repository

Ramli, Rindra M.

2017-05-17

An overview of the Recommendation Study and the subsequent Implementation of a new Electronic Resources Management system ERMS in an international graduate research university in the Kingdom of Saudi Arabia. It covers the timeline, deliverables and challenges as well as lessons learnt by the Project Team.

Apollo Soyuz Test Project Weights and Mass Properties Operational Management System

Science.gov (United States)

Collins, M. A., Jr.; Hischke, E. R.

1975-01-01

The Apollo Soyuz Test Project (ASTP) Weights and Mass Properties Operational Management System was established to assure a timely and authoritative method of acquiring, controlling, generating, and disseminating an official set of vehicle weights and mass properties data. This paper provides an overview of the system and its interaction with the various aspects of vehicle and component design, mission planning, hardware and software simulations and verification, and real-time mission support activities. The effect of vehicle configuration, design maturity, and consumables updates is discussed in the context of weight control.

An overview of waste management systems at the West Valley demonstration project

International Nuclear Information System (INIS)

McIntosh, T.W.; Bixby, W.W.; Krauss, J.E.; Leap, D.R.

1988-01-01

In 1980, the United States Congress passed into law the West Valley Demonstration Project Act authorizing the Department of Energy (DOE) to conduct a nuclear waste management project at a former commercial nuclear fuel reprocessing facility located in West Valley, New York. The Project's main objective is to solidify approximately two million litres of high-level radioactive liquid waste into a form suitable for transport to a federal repository for final disposal. The majority of the liquid waste was produced as a by-product of the PUREX extraction process and is stored in an underground steel tank. A waste characterization program has shown that the neutralized waste has settled into two distinct layers: a clear alkaline liquid (supernatant) layer and a dense precipitate (sludge) layer. The principle radioactive elements in the waste are cesium 137 (supernatant) and strontium 90 (sludge). This paper describes the overall project strategy, the waste management systems, the present project engineering and construction status and the project schedule leading to radioactive operation

Implementation strategies for health systems in low-income countries: an overview of systematic reviews

Science.gov (United States)

Pantoja, Tomas; Opiyo, Newton; Lewin, Simon; Paulsen, Elizabeth; Ciapponi, Agustín; Wiysonge, Charles S; Herrera, Cristian A; Rada, Gabriel; Peñaloza, Blanca; Dudley, Lilian; Gagnon, Marie-Pierre; Garcia Marti, Sebastian; Oxman, Andrew D

2017-01-01

Background A key function of health systems is implementing interventions to improve health, but coverage of essential health interventions remains low in low-income countries. Implementing interventions can be challenging, particularly if it entails complex changes in clinical routines; in collaborative patterns among different healthcare providers and disciplines; in the behaviour of providers, patients or other stakeholders; or in the organisation of care. Decision-makers may use a range of strategies to implement health interventions, and these choices should be based on evidence of the strategies' effectiveness. Objectives To provide an overview of the available evidence from up-to-date systematic reviews about the effects of implementation strategies for health systems in low-income countries. Secondary objectives include identifying needs and priorities for future evaluations and systematic reviews on alternative implementation strategies and informing refinements of the framework for implementation strategies presented in the overview. Methods We searched Health Systems Evidence in November 2010 and PDQ-Evidence up to December 2016 for systematic reviews. We did not apply any date, language or publication status limitations in the searches. We included well-conducted systematic reviews of studies that assessed the effects of implementation strategies on professional practice and patient outcomes and that were published after April 2005. We excluded reviews with limitations important enough to compromise the reliability of the review findings. Two overview authors independently screened reviews, extracted data and assessed the certainty of evidence using GRADE. We prepared SUPPORT Summaries for eligible reviews, including key messages, 'Summary of findings' tables (using GRADE to assess the certainty of the evidence) and assessments of the relevance of findings to low-income countries. Main results We identified 7272 systematic reviews and included 39 of

Executive overview and introduction to the SMAP information system life-cycle and documentation standards

Science.gov (United States)

1989-01-01

An overview of the five volume set of Information System Life-Cycle and Documentation Standards is provided with information on its use. The overview covers description, objectives, key definitions, structure and application of the standards, and document structure decisions. These standards were created to provide consistent NASA-wide structures for coordinating, controlling, and documenting the engineering of an information system (hardware, software, and operational procedures components) phase by phase.

Thermal management for LED applications

CERN Document Server

Poppe, András

2014-01-01

Thermal Management for LED Applications provides state-of-the-art information on recent developments in thermal management as it relates to LEDs and LED-based systems and their applications. Coverage begins with an overview of the basics of thermal management including thermal design for LEDs, thermal characterization and testing of LEDs, and issues related to failure mechanisms and reliability and performance in harsh environments. Advances and recent developments in thermal management round out the book with discussions on advances in TIMs (thermal interface materials) for LED applications, advances in forced convection cooling of LEDs, and advances in heat sinks for LED assemblies. This book also: Presents a comprehensive overview of the basics of thermal management as it relates to LEDs and LED-based systems Discusses both design and thermal management considerations when manufacturing LEDs and LED-based systems Covers reliability and performance of LEDs in harsh environments Has a hands-on applications a...

Boolean modeling in systems biology: an overview of methodology and applications

International Nuclear Information System (INIS)

Wang, Rui-Sheng; Albert, Réka; Saadatpour, Assieh

2012-01-01

Mathematical modeling of biological processes provides deep insights into complex cellular systems. While quantitative and continuous models such as differential equations have been widely used, their use is obstructed in systems wherein the knowledge of mechanistic details and kinetic parameters is scarce. On the other hand, a wealth of molecular level qualitative data on individual components and interactions can be obtained from the experimental literature and high-throughput technologies, making qualitative approaches such as Boolean network modeling extremely useful. In this paper, we build on our research to provide a methodology overview of Boolean modeling in systems biology, including Boolean dynamic modeling of cellular networks, attractor analysis of Boolean dynamic models, as well as inferring biological regulatory mechanisms from high-throughput data using Boolean models. We finally demonstrate how Boolean models can be applied to perform the structural analysis of cellular networks. This overview aims to acquaint life science researchers with the basic steps of Boolean modeling and its applications in several areas of systems biology. (paper)

Overview of coupled bunch active damper systems at FNAL

International Nuclear Information System (INIS)

Steimel, J.; Crisp, J.; Ma, Hengjie; Marriner, J.; McGinnis, D.

1996-05-01

Beam intensities in all of the accelerators at Fermilab will increase significantly when the Main Injector becomes operational and will cause unstable oscillations in transverse position and energy. Places where the coupled bunch oscillations could dilute emittances include the Booster, Main Injector, and Tevatron. This paper provides an overview of the active feedback system upgrades which will be used to counteract the problem. It will explain the similarities between all the systems and will also explain design differences between longitudinal and transverse systems, fast sweeping systems, and systems for partially filled machines. Results from operational systems will also be shown. 7 refs., 4 figs., 1 tab

Astronomical Instrumentation Systems Quality Management Planning: AISQMP (Abstract)

Science.gov (United States)

Goldbaum, J.

2017-12-01

(Abstract only) The capability of small aperture astronomical instrumentation systems (AIS) to make meaningful scientific contributions has never been better. The purpose of AIS quality management planning (AISQMP) is to ensure the quality of these contributions such that they are both valid and reliable. The first step involved with AISQMP is to specify objective quality measures not just for the AIS final product, but also for the instrumentation used in its production. The next step is to set up a process to track these measures and control for any unwanted variation. The final step is continual effort applied to reducing variation and obtaining measured values near optimal theoretical performance. This paper provides an overview of AISQMP while focusing on objective quality measures applied to astronomical imaging systems.

An Overview of Reconfigurable Hardware in Embedded Systems

Directory of Open Access Journals (Sweden)

Wenyin Fu

2006-09-01

Full Text Available Over the past few years, the realm of embedded systems has expanded to include a wide variety of products, ranging from digital cameras, to sensor networks, to medical imaging systems. Consequently, engineers strive to create ever smaller and faster products, many of which have stringent power requirements. Coupled with increasing pressure to decrease costs and time-to-market, the design constraints of embedded systems pose a serious challenge to embedded systems designers. Reconfigurable hardware can provide a flexible and efficient platform for satisfying the area, performance, cost, and power requirements of many embedded systems. This article presents an overview of reconfigurable computing in embedded systems, in terms of benefits it can provide, how it has already been used, design issues, and hurdles that have slowed its adoption.

Overview of Single-Phase Grid-Connected Photovoltaic Systems

DEFF Research Database (Denmark)

Yang, Yongheng; Blaabjerg, Frede

2017-01-01

A continuous booming installation of solar photovoltaic (PV) systems has been witnessed worldwide. It is mainly driven by the imperative demand of “clean” power generation from renewables. Grid-connected PV systems will thus become an even more active player in the future mixed power systems, which...... systems. This chapter thus gives an overview of the advancement of power electronics converters in single-phase grid-connected PV systems, being commonly used in residential applications. Demands to single-phase grid-connected PV systems and the general control strategies are also addressed...... are linked together by a vast of power electronics converters and the power grid. In order to achieve a reliable and efficient power generation from PV systems, more stringent demands have been imposed on the entire PV system. It, in return, advances the development of the power converter technology in PV...

Overview of NASA's Next Generation Air Transportation System (NextGen) Research

Science.gov (United States)

Swenson, Harry N.

2009-01-01

This slide presentation is an overview of the research for the Next Generation Air Transportation System (NextGen). Included is a review of the current air transportation system and the challenges of air transportation research. Also included is a review of the current research highlights and significant accomplishments.

Theory and applications of artificial endocrine system-an overview

Institute of Scientific and Technical Information of China (English)

CUI Wei; QIANG Sheng; GAO X Z

2006-01-01

Inspired by the biological endocrine system, the Artificial Endocrine System (AES) has been proposed and investigated during the past decade. As a novel branch of computational intelligence methods, it has its unique and distinguishing features. This paper intends to give an overview of the current research work in the AES. The preliminary theory of the AES, which is based on the simplified mathematic models of natural endocrine system, is first introduced here. Some typical AES algorithms and their applications are also briefly discussed. Finally, a few remarks and conclusions are made.

Current Hitachi knowledge engineering systems: an overview

Energy Technology Data Exchange (ETDEWEB)

Masui, S; Maeda, A; Masuishi, T [Hitachi, Ltd., Tokyo (Japan)

1992-02-01

In order to bring the knowledge engineering technology up to the practical phase, Hitachi has provided several knowledge engineering system products, including expert system building tools, knowledge acquisition tools, and many kinds of stand-alone and build-in expert systems in both the business and process control fields. In this review article, an overview of Hitachi{prime}s recent knowledge systems is described, which includes a trend analysis on recent market recognition. In addition, to introduce the Hitachi{prime}s current activities, a new product, a user interface building tool, and a new method of tuning fuzzy membership functions using a neuro-computing algorithm are also described. Furthermore, it is pointed out that not only practical tools and methodologies, but also a practical development team, including a planning section, a cooperating expert, a user section, and experienced knowledge engineers, is needed to achieve practical expert systems. 20 refs., 10 figs., 1 tab.

Overview of the critical disaster management challenges faced during Van 2011 earthquakes.

Science.gov (United States)

Tolon, Mert; Yazgan, Ufuk; Ural, Derin N; Goss, Kay C

2014-01-01

On October 23, 2011, a M7.2 earthquake caused damage in a widespread area in the Van province located in eastern Turkey. This strong earthquake was followed by a M5.7 earthquake on November 9, 2011. This sequence of damaging earthquakes led to 644 fatalities. The management during and after these earthquake disaster imposed many critical challenges. In this article, an overview of these challenges is presented based on the observations by the authors in the aftermath of this disaster. This article presents the characteristics of 2011 Van earthquakes. Afterward, the key information related to the four main phases (ie, preparedness, mitigation, response, and recovery) of the disaster in Van is presented. The potential strategies that can be taken to improve the disaster management practice are identified, and a set of recommendations are proposed to improve the existing situation.

Waste Generation Overview, Course 23263

International Nuclear Information System (INIS)

Simpson, Lewis Edward

2016-01-01

This course, Waste Generation Overview Live (COURSE 23263), provides an overview of federal and state waste management regulations, as well as Los Alamos National Laboratory (LANL) policies and procedures for waste management operations. The course covers the activities involved in the cradle-to-grave waste management process and focuses on waste characterization, waste compatibility determinations and classification, and the storage requirements for temporary waste accumulation areas at LANL. When you have completed this course, you will be able to recognize federal, state, and LANL environmental requirements and their impact on waste operations; recognize the importance of the cradle-to-grave waste management process; identify the roles and responsibilities of key LANL waste management personnel (e.g., Waste Generator, Waste Management Coordinator, Waste Stream Profile approver, and Waste Certification Official); characterize a waste stream to determine whether it meets the definition of a hazardous waste, as well as characterize the use and minimum requirements for use of acceptable knowledge (AK) for waste characterization and waste compatibility documentation requirements; and identify the requirements for setting up and managing temporary waste accumulation areas.

Waste Generation Overview, Course 23263

Energy Technology Data Exchange (ETDEWEB)

Simpson, Lewis Edward [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-11-28

This course, Waste Generation Overview Live (COURSE 23263), provides an overview of federal and state waste management regulations, as well as Los Alamos National Laboratory (LANL) policies and procedures for waste management operations. The course covers the activities involved in the cradle-to-grave waste management process and focuses on waste characterization, waste compatibility determinations and classification, and the storage requirements for temporary waste accumulation areas at LANL. When you have completed this course, you will be able to recognize federal, state, and LANL environmental requirements and their impact on waste operations; recognize the importance of the cradle-to-grave waste management process; identify the roles and responsibilities of key LANL waste management personnel (e.g., Waste Generator, Waste Management Coordinator, Waste Stream Profile approver, and Waste Certification Official); characterize a waste stream to determine whether it meets the definition of a hazardous waste, as well as characterize the use and minimum requirements for use of acceptable knowledge (AK) for waste characterization and waste compatibility documentation requirements; and identify the requirements for setting up and managing temporary waste accumulation areas.

Probabilistic safety assessment for instrumentation and control systems in nuclear power plants: an overview

International Nuclear Information System (INIS)

Lu, Lixuan; Jiang, Jin

2004-01-01

Deregulation in the electricity market has resulted in a number of challenges in the nuclear power industry. Nuclear power plants must find innovative ways to remain competitive by reducing operating costs without jeopardizing safety. Instrumentation and Control (I and C) systems not only play important roles in plant operation, but also in reducing the cost of power generation while maintaining and/or enhancing safety. Therefore, it is extremely important that I and C systems are managed efficiently and economically. With the increasing use of digital technologies, new methods are needed to solve problems associated with various aspects of digital I and C systems. Probabilistic Safety Assessment (PSA) has proved to be an effective method for safety analysis and risk-based decisions, even though challenges are still present. This paper provides an overview of PSA applications in three areas of digital I and C systems in nuclear power plants. These areas are Graded Quality Assurance, Surveillance Testing, and Instrumentation and Control System Design. In addition, PSA application in the regulation of nuclear power plants that adopt digital I and C systems is also investigated. (author)

TS Seminar: Overview of Fermilab’s Power Distribution System

CERN Multimedia

CERN. Geneva

2006-01-01

A 27.5 km2 (6800 acre) site is powered by two 345 kV, two 34.5 kV, one 12.4 kV and five 7.2 kV lines. The talk gives an overview of Fermilab’s power distribution system with emphasis on accelerator power. The accelerator power distribution system provides 13.8 kV power to all accelerators and conventional loads. Design criteria, design features and operational experience are given.Organiser(s): F. Rodriguez-Mateos & Emmanuel Tsesmelis

Systems for carbon trading. An overview

International Nuclear Information System (INIS)

Hasselknippe, Henrik

2003-12-01

This paper focuses on the increasing number of regional, national and international systems for trading and transfer of greenhouse gas emission allowances and emission reduction credits. The paper will serve as a platform for further discussions on the development of the international carbon trading market. The analysis builds on the International Emissions Trading Association (IETA) Trading Schemes Database, which has been developed by Point Carbon, covering all known trading schemes and programs. A full overview of all existing trading schemes and proposals is presented, showing inter alia the outreach and judicial nature of the systems, the range and nature of emission reduction or credit purchase targets, allocation methods used, links to external systems, and possibilities for the use of project-based credits. A comparative assessment is performed on a number of design criteria, allowing for conclusions to be drawn on the level of harmonisation of these systems, and the identification of convergence or divergence of important operational features. The systems covered in the analysis display considerable variation when it comes to key design criteria and functionality. A rapid integration of many of the planned and active systems seems likely following the agreement on the EU emissions trading scheme, and will be further accelerated if the Kyoto Protocol is ratified

Life cycle costing of waste management systems: Overview, calculation principles and case studies

International Nuclear Information System (INIS)

Martinez-Sanchez, Veronica; Kromann, Mikkel A.; Astrup, Thomas Fruergaard

2015-01-01

Highlights: • We propose a comprehensive model for cost assessment of waste management systems. • The model includes three types of LCC: Conventional, Environmental and Societal LCCs. • The applicability of the proposed model is tested with two case studies. - Abstract: This paper provides a detailed and comprehensive cost model for the economic assessment of solid waste management systems. The model was based on the principles of Life Cycle Costing (LCC) and followed a bottom-up calculation approach providing detailed cost items for all key technologies within modern waste systems. All technologies were defined per tonne of waste input, and each cost item within a technology was characterised by both a technical and an economic parameter (for example amount and cost of fuel related to waste collection), to ensure transparency, applicability and reproducibility. Cost items were classified as: (1) budget costs, (2) transfers (for example taxes, subsidies and fees) and (3) externality costs (for example damage or abatement costs related to emissions and disamenities). Technology costs were obtained as the sum of all cost items (of the same type) within a specific technology, while scenario costs were the sum of all technologies involved in a scenario. The cost model allows for the completion of three types of LCC: a Conventional LCC, for the assessment of financial costs, an Environmental LCC, for the assessment of financial costs whose results are complemented by a Life Cycle Assessment (LCA) for the same system, and a Societal LCC, for socio-economic assessments. Conventional and Environmental LCCs includes budget costs and transfers, while Societal LCCs includes budget and externality costs. Critical aspects were found in the existing literature regarding the cost assessment of waste management, namely system boundary equivalency, accounting for temporally distributed emissions and impacts, inclusions of transfers, the internalisation of environmental

Life cycle costing of waste management systems: Overview, calculation principles and case studies

Energy Technology Data Exchange (ETDEWEB)

Martinez-Sanchez, Veronica, E-mail: vems@env.dtu.dk [Technical University of Denmark, Department of Environmental Engineering, Miljoevej, Building 113, 2800 Kgs. Lyngby (Denmark); Kromann, Mikkel A. [COWI A/S, Parallelvej 2, 2800 Kgs. Lyngby (Denmark); Astrup, Thomas Fruergaard [Technical University of Denmark, Department of Environmental Engineering, Miljoevej, Building 113, 2800 Kgs. Lyngby (Denmark)

2015-02-15

Highlights: • We propose a comprehensive model for cost assessment of waste management systems. • The model includes three types of LCC: Conventional, Environmental and Societal LCCs. • The applicability of the proposed model is tested with two case studies. - Abstract: This paper provides a detailed and comprehensive cost model for the economic assessment of solid waste management systems. The model was based on the principles of Life Cycle Costing (LCC) and followed a bottom-up calculation approach providing detailed cost items for all key technologies within modern waste systems. All technologies were defined per tonne of waste input, and each cost item within a technology was characterised by both a technical and an economic parameter (for example amount and cost of fuel related to waste collection), to ensure transparency, applicability and reproducibility. Cost items were classified as: (1) budget costs, (2) transfers (for example taxes, subsidies and fees) and (3) externality costs (for example damage or abatement costs related to emissions and disamenities). Technology costs were obtained as the sum of all cost items (of the same type) within a specific technology, while scenario costs were the sum of all technologies involved in a scenario. The cost model allows for the completion of three types of LCC: a Conventional LCC, for the assessment of financial costs, an Environmental LCC, for the assessment of financial costs whose results are complemented by a Life Cycle Assessment (LCA) for the same system, and a Societal LCC, for socio-economic assessments. Conventional and Environmental LCCs includes budget costs and transfers, while Societal LCCs includes budget and externality costs. Critical aspects were found in the existing literature regarding the cost assessment of waste management, namely system boundary equivalency, accounting for temporally distributed emissions and impacts, inclusions of transfers, the internalisation of environmental

The Practice of Campus-Based Threat Assessment: An Overview

Science.gov (United States)

Pollard, Jeffrey W.; Nolan, Jeffrey J.; Deisinger, Eugene R. D.

2012-01-01

This article provides an overview of threat assessment and management as implemented on campuses of higher education. Standards of practice and state calls for implementation are cited. An overview of some of the basic principles for threat assessment and management implementation is accompanied by examples of how they are utilized. Pitfalls…

A robotic home telehealth platform system for treatment adherence, social assistance and companionship - an overview.

Science.gov (United States)

Oddsson, Lars I E; Radomski, Mary V; White, Matthew; Nilsson, Daniel

2009-01-01

Well-known difficulties of making patients adhere to assigned treatments have made engineers and clinicians look towards technology for possible solutions. Recent studies have found that cell phone-based text messaging can help drive positive changes in patients' disease management and preventive health behavior. Furthermore, work in the area of assistive robotics indicates benefits for patients although robotic solutions tend to become expensive. However, continued improvement in sensor, computer and wireless technologies combined with decreases in cost is paving the way for development of affordable robotic systems that can help improve patient care and potentially add value to the healthcare system. This paper provides a high-level design overview of SKOTEE, the Sister Kenny hOme ThErapy systEm, an inexpensive robotic platform system designed to provide adherence support for home exercise programs, taking medication, appointment reminders and clinician communication. SKOTEE will also offer companionship as well as entertainment and social networking opportunities to the patient in their home. A video of the system is presented at the conference.

Cost management of IT beyond cost of ownership models : a state of the art overview of the Dutch financial services industry

NARCIS (Netherlands)

van Maanen, H.; Berghout, E.W.

Controlling costs is an essential part of a value driven information technology (IT) management. This paper gives a state of the art overview of IT cost management practice. Both theoretical and an empirical approach are taken. The theoretical approach is based on both general accounting literature

Overview of NSSS Fluid System Design of PGSFR

Energy Technology Data Exchange (ETDEWEB)

Han, Ji-Woong; Choi, Seok-Ki; Kim, Seong-O; Kim, Eui-Kwang; Kim, Dehee; Hong, Jonggan; Ye, Huee-Youl; Yeom, Sujin; Ryu, Seungho; Yoon, Jung; Choi, Sun Rock; Park, Jin-Seok; Lee, Tae-Ho Lee [KAERI, Daejeon (Korea, Republic of)

2016-05-15

In this paper an overview on the NSSS fluid system design of PGSFR is described based on the issued design documents. System concepts and major components design concepts for PHTS, IHTS, DHRS and SWRPRS were developed. Thermal-hydraulic characteristics were analyzed based on CFD simulation. The design bases and concepts for auxiliary systems were also developed. The upstream design requirements of fluid system such as system design requirements, component design requirements, I and C design requirements, BOP interface design requirements, design guides and P and IDs were produced. The control logic and computer code for the analysis for operational characteristics is under progress. The protection system consists of a safety grade PPS and a non-safety grade DPS (Diverse Protection System). The DPS provides a diverse method to trip the reactor to satisfy the requirements relative to ATWS (Anticipated Transients Without Scram) as well as Defense-In-Depth and Diversity.

Integrating configuration workflows with project management system

International Nuclear Information System (INIS)

Nilsen, Dimitri; Weber, Pavel

2014-01-01

The complexity of the heterogeneous computing resources, services and recurring infrastructure changes at the GridKa WLCG Tier-1 computing center require a structured approach to configuration management and optimization of interplay between functional components of the whole system. A set of tools deployed at GridKa, including Puppet, Redmine, Foreman, SVN and Icinga, provides the administrative environment giving the possibility to define and develop configuration workflows, reduce the administrative effort and improve sustainable operation of the whole computing center. In this presentation we discuss the developed configuration scenarios implemented at GridKa, which we use for host installation, service deployment, change management procedures, service retirement etc. The integration of Puppet with a project management tool like Redmine provides us with the opportunity to track problem issues, organize tasks and automate these workflows. The interaction between Puppet and Redmine results in automatic updates of the issues related to the executed workflow performed by different system components. The extensive configuration workflows require collaboration and interaction between different departments like network, security, production etc. at GridKa. Redmine plugins developed at GridKa and integrated in its administrative environment provide an effective way of collaboration within the GridKa team. We present the structural overview of the software components, their connections, communication protocols and show a few working examples of the workflows and their automation.

General overview of the APS low-level rf control system

International Nuclear Information System (INIS)

Stepp, J.D.; Bridges, J.F.

1993-01-01

This paper describes the proposed low-level rf system of the positron accumulator ring (PAR), the injector synchrotron, and the storage ring of the 7-GeV Advanced Photon Source. Four rf systems are described since the PAR consists of a fundamental frequency system at 9.8 MHz and a harmonic system at 117 MHz. A block diagram of an accelerating unit is shown and descriptions of various control loops are made (including amplitude control, phase control, and cavity tuning control). Also, a brief overview of the computer interface is given

Supply chain management in view of climate change: an overview of possible impacts and the road ahead

Directory of Open Access Journals (Sweden)

Thomas K. Dasaklis

2013-09-01

Full Text Available Purpose: The paper aims to provide a general overview of the impacts of climate change upon supply chains and to analyze the implications of climate change for supply chain management in terms of strategic and operational planning. A roadmap of fruitful research approaches is also presented. Design/methodology/approach: The paper makes use of a general review of the relevant literature and, based on a systematic categorization of the findings, looks for useful insights towards the issues of climate change and supply chain management. A framework is drawn for systematically assessing the impacts of climate change upon supply chains and their management, while making suggestions for future research. Findings and Originality/value: Supply chain networks run physical, operational and reputational risks attributed to climate change. Escalation in regulations, market forces and stakeholders’ pressures are paving the way for the decarbonization of supply chains with obvious implications for supply chain management. Supply chain managers should pay special attention to the impacts of climate change on supply chains and academics should further explore the interrelationships between climate change and supply chain design and operations. Research limitations/implications: Additional qualitative research based on grounded theory is suggested for validating and interconnecting the findings with empirical data. Practical implications: The paper provides several insights towards the issues of supply chain management in view of climate change and may serve as an initial basis for exploring future research directions by academics. Practitioners, especially those drafting value-creating supply chain agendas, may also find these insights useful for improving their managerial practices. Originality/value: By providing an original structured overview of the impacts of climate change upon supply chain design and operations management the paper substantiates the

Quality management system

Energy Technology Data Exchange (ETDEWEB)

Lee, Mu Sung

2009-08-15

This book deals with ISO9001 quality management system which includes summary of this system such as classification of quality, principle of quality management, and definition, requirement and procedure of quality management system, introduction of ISO9001 system like model of ISO9001 quality management system, ISO certificate system, structure of ISO9001 standard, requirement of ISO9001 quality management system, process approach and documentation of system, propel cases of ISO9001 quality management system.

Quality management system

International Nuclear Information System (INIS)

Lee, Mu Sung

2009-08-01

This book deals with ISO9001 quality management system which includes summary of this system such as classification of quality, principle of quality management, and definition, requirement and procedure of quality management system, introduction of ISO9001 system like model of ISO9001 quality management system, ISO certificate system, structure of ISO9001 standard, requirement of ISO9001 quality management system, process approach and documentation of system, propel cases of ISO9001 quality management system.

Overview of Management Theory

Science.gov (United States)

1991-02-01

theory orients command leadership for the enormous task of managing organizations in our environment fraught with volatility, uncertainty...performance and organizational ethics. A THEORY OF MANAGEMENT BACKGROUND BASIC MANAGEMENT BEHAVIORAL Definitions FUNCTIONS ASPECTS History Planning Leadership ...the best way to manage in their theory of managerial leadership . To them, the 9,9 position on their model, "is acknowledged by managers as the

Risk Assessment Overview

Science.gov (United States)

Prassinos, Peter G.; Lyver, John W., IV; Bui, Chinh T.

2011-01-01

Risk assessment is used in many industries to identify and manage risks. Initially developed for use on aeronautical and nuclear systems, risk assessment has been applied to transportation, chemical, computer, financial, and security systems among others. It is used to gain an understanding of the weaknesses or vulnerabilities in a system so modification can be made to increase operability, efficiency, and safety and to reduce failure and down-time. Risk assessment results are primary inputs to risk-informed decision making; where risk information including uncertainty is used along with other pertinent information to assist management in the decision-making process. Therefore, to be useful, a risk assessment must be directed at specific objectives. As the world embraces the globalization of trade and manufacturing, understanding the associated risk become important to decision making. Applying risk assessment techniques to a global system of development, manufacturing, and transportation can provide insight into how the system can fail, the likelihood of system failure and the consequences of system failure. The risk assessment can identify those elements that contribute most to risk and identify measures to prevent and mitigate failures, disruptions, and damaging outcomes. In addition, risk associated with public and environment impact can be identified. The risk insights gained can be applied to making decisions concerning suitable development and manufacturing locations, supply chains, and transportation strategies. While risk assessment has been mostly applied to mechanical and electrical systems, the concepts and techniques can be applied across other systems and activities. This paper provides a basic overview of the development of a risk assessment.

US Department of Energy, Richland Operations Office Integrated Safety Management System Program Description

International Nuclear Information System (INIS)

SHOOP, D.S.

2000-01-01

The purpose of this Integrated Safety Management System (ISMS) Program Description (PD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This PD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this PD contains some information on contractor processes and procedures which then require RL approval or oversight

DOCUMENT MANAGEMENT SYSTEMS AS A TOOL WHICH IMPROVE ADMINISTRATIVE PROCEDURES OF THE LOCAL GOVERNMENT UNITS

Directory of Open Access Journals (Sweden)

Katarzyna MARCINIAK

2013-10-01

Full Text Available This paper presents the overview of the costs incurred by the traditional record‐keeping. This was followed by characteristics of document management systems. It also presents the current state of implementation of such systems and presents the benefits of their implementation. Presented tool seems to be a good alternative that meets the expectations of both – clerks and applicants. The paper describes essential characteristics of such systems. There are also important aspects, that have to be considered before the implementation of this type of system.

An Overview of Information Technology Tools Implementation in Supply Chain Management

Directory of Open Access Journals (Sweden)

Mahadi Hasan Miraz

2016-06-01

Full Text Available Information Technology (IT and its usage in administrations and across the supply chain has develop a factor of competitive benefit for numerous companies. This paper focuses the practice of IT tools for Supply Chain Management (SCM [10]. It also highlights the impact of IT in helping to rearrange the whole delivery set up to accomplish advanced service levels and lower inventory and lower supply chain charges [10]. An overview and perceptible benefits of the present IT tools that are extensively organized is also providing with focus on current configurations considerations, accessible applications. The role of existing communication technologies in making IT an enabler of SCM is highlighted by addressing a range of dissimilar point and initiative solutions in a diversity of supply chain settings.

The analysis of the program to develop the nuclear waste management system

International Nuclear Information System (INIS)

Woods, T.W.

1991-09-01

This Part A of Volume 2 of the three volumes that constitute the Westinghouse Hanford Company report, The Analysis of the Program to Develop the Nuclear Waste Management System, WHC-EP-0465. Volume 2 provides an overview of the analysis of the program, describes the functional analysis methods and bases, and summarizes the results of the analysis of the Office of Civilian Radioactive Waste Management (OCRWM) Nuclear Waste Management System (NWMS) program. This volume presents the complete functional analysis results, which are composed of the following: identification of the functions and their hierarchial relationships, the definition and scope of each function, process flow diagrams that show the interrelationships of the function interfaces, and descriptions of the products produced by each function. Volume 3 identifies requirements sources and the allocated requirements for the OCRWM program and the functions to which those requirements have been allocated. References are cited in Part B of Volume 2. 5 figs

Designing a fuzzy expert system for selecting knowledge management strategy

OpenAIRE

Ameneh Khadivar; Shohreh Nasri Nasr Abadi; Elham Fallah

2014-01-01

knowledge management strategy is mentioned as one of the most important success factors for implementing knowledge management. The KM strategy selection is a complex decision that requires consideration of several factors. For evaluation and selection of an appropriate knowledge management strategy in organizations, many factors must be considered. The identified factors and their impact on knowledge management strategy are inherently ambiguous. In this study, an overview of theoretical found...

Safer travel, improved economic productivity : incident management systems

Science.gov (United States)

1999-01-01

This brochure gives an overview of how incident management technologies can be used to reduce incident-related congestion and increase road safety. It focuses on the need for interagency cooperation and the benefits that can be derived from the coope...

AN OVERVIEW OF THE ROMANIAN EDUCATION SYSTEM

Directory of Open Access Journals (Sweden)

CLAUDIA ANDREEA UREAN

2017-06-01

Full Text Available A foundation of human development and one of the most powerful instruments in the fight against poverty, education is the premise in building a solid construction. Education arms people with knowledge on social development and progress. An extension of our latest work “Romanian education system – descriptive analysis”, the aim of the present research is to offer an overview of the Romanian education system which has passed through many radical reforms over the last 27 years. The first part of our research presents some studies identified in the specialized literature which analyze the Romanian education system. The state of the art is followed by descriptive statistics regarding the enrolled population trends in Romania - by urban and rural areas, by counties and by gender-during the period 1995-2015; the enrollment rate in formal education and the dropout rate. The last part of our research represents the conclusions section.

Risk management overview

International Nuclear Information System (INIS)

McGovern, S.

1995-01-01

Launching of the first natural gas contract by the New York Mercantile Exchange (NYMEX) in April 1990 was a huge success which allowed natural gas to surpass crude oil as the most successful launch of any commodity contract. Despite this unprecedented initial success it must be kept in mind that in a competitive marketplace there are risks of many kinds (market risks, price risks, basis risks, currency risks and timing risks), that parties must deal with in everyday operations. The concept of risk management was defined, techniques and issues in risk management were explained, a glossary of fully explained industry terms, and basic financial tools most often used in risk management, were provided. 11 figs

Intraoral scanning systems - a current overview.

Science.gov (United States)

Zimmermann, M; Mehl, A; Mörmann, W H; Reich, S

2015-01-01

There is no doubt today about the possibilities and potential of digital impression-taking with the aid of intraoral optical impression systems, and the past few years have seen a considerable increase in the range of optical intraoral scanners available on the market. On the strength of numerous innovations and a wider range of indications in orthodontics and implantology, intraoral scanning systems appear to be a highly promising development for the future. Digital impression-taking with intraoral scanners has already shown itself in some respects to be clearly superior to conventional impression- taking. Particularly worthy of mention is the versatile integration of digital impressions into diagnostic and treatment concepts to provide a customizable healthcare solution for the patient. It remains exciting to look forward to future developments that will allow us to observe digital impression-taking--as with other digital applications already established in everyday life--becoming firmly established in the routine of dentistry and dental technology. This article presents an overview of the benefits and limitations of digital impression-taking using intraoral scanning systems, and includes a summary of all the relevant intraoral scanners available on the market at present.

SHARK-NIR system design analysis overview

Science.gov (United States)

Viotto, Valentina; Farinato, Jacopo; Greggio, Davide; Vassallo, Daniele; Carolo, Elena; Baruffolo, Andrea; Bergomi, Maria; Carlotti, Alexis; De Pascale, Marco; D'Orazi, Valentina; Fantinel, Daniela; Magrin, Demetrio; Marafatto, Luca; Mohr, Lars; Ragazzoni, Roberto; Salasnich, Bernardo; Verinaud, Christophe

2016-08-01

In this paper, we present an overview of the System Design Analysis carried on for SHARK-NIR, the coronagraphic camera designed to take advantage of the outstanding performance that can be obtained with the FLAO facility at the LBT, in the near infrared regime. Born as a fast-track project, the system now foresees both coronagraphic direct imaging and spectroscopic observing mode, together with a first order wavefront correction tool. The analysis we here report includes several trade-offs for the selection of the baseline design, in terms of optical and mechanical engineering, and the choice of the coronagraphic techniques to be implemented, to satisfy both the main scientific drivers and the technical requirements set at the level of the telescope. Further care has been taken on the possible exploitation of the synergy with other LBT instrumentation, like LBTI. A set of system specifications is then flown down from the upper level requirements to finally ensure the fulfillment of the science drivers. The preliminary performance budgets are presented, both in terms of the main optical planes stability and of the image quality, including the contributions of the main error sources in different observing modes.

Local Area Network Material Accounting System (LANMAS) Functions and Features Overview

International Nuclear Information System (INIS)

Robichaux, J.J.

1998-07-01

The Local Area Network Material Accounting System (LANMAS) application is a standardized approach to comply with the DOE Order 5633.3B, control and Accountability of Nuclear Material, material accounting requirements. This paper provides a general overview of the functions and features included in the LANMAS application

The male reproductive system - An overview of common problems.

Science.gov (United States)

Wijesinha, Sanjiva; Piterman, Leon; Kirby, Catherine N

2013-05-01

Many male reproductive system problems could be perceived as being embarrassing, which may be one of the reasons that they are often not identified in general practice. This article provides an overview of some common problems affecting the male reproductive system, and outlines current treatment options. Erectile dysfunction, premature ejaculation, loss of libido, testicular cancer and prostate disease may cause embarrassment to the patient and, occasionally, the general practitioner. We describe how patients affected by these conditions may present to general practice, and discuss the reasons why they may not present. We also discuss how GPs can overcome difficulties in identifying and dealing with their male patients suffering from male reproductive system issues.

Overview of the Spallation Neutron Source Linac Low-Level RF Control System

CERN Document Server

Champion, Mark; Doolittle, Lawrence; Kasemir, Kay-Uwe; Ma, Hengjie; Piller, Maurice; Ratti, Alessandro

2005-01-01

The design and production of the Spallation Neutron Source Linac Low-Level RF control system is complete, and installation will be finished in Spring 2005. The warm linac beam commissioning run in Fall 2004 was the most extensive test to date of the LLRF control system, with fourteen (of an eventual 96) systems operating simultaneously. In this paper we present an overview of the LLRF control system, the experience in designing, building and installing the system, and operational results.

Governance and management of health care institutions in Serbia: An overview of recent developments

Directory of Open Access Journals (Sweden)

Vesna Bjegovic-Mikanovic

2016-04-01

Full Text Available In order to promote awareness of factors that affect social services, their quality, effectiveness and coverage, the term “governance” is frequently used. However, there is no agreement on definitions, frameworks and how it relates to the health sector. In this overview, two interrelated processes in Serbia will be analyzed: governance and management at the macro-, meso-, and micro level. Key messages are as follows: i Continue decentralization and support to an effective national decision-making body (Health Council of Serbia with all relevant stakeholders; ii Reduce the well-known implementation gap and agree on a binding time frame for reforms, and; iii Establish obligatory schemes for education and training of managers and support sustainability of state institutional capacity to teach, train and advise on a scientific basis.

An information system for sustainable materials management with material flow accounting and waste input–output analysis

Directory of Open Access Journals (Sweden)

Pi-Cheng Chen

2017-05-01

Full Text Available Sustainable materials management focuses on the dynamics of materials in economic and environmental activities to optimize material use efficiency and reduce environmental impact. A preliminary web-based information system is thus developed to analyze the issues of resource consumption and waste generation, enabling countries to manage resources and wastes from a life cycle perspective. This pioneering system features a four-layer framework that integrates information on physical flows and economic activities with material flow accounting and waste input–output table analysis. Within this framework, several applications were developed for different waste and resource management stakeholders. The hierarchical and interactive dashboards allow convenient overview of economy-wide material accounts, waste streams, and secondary resource circulation. Furthermore, the system can trace material flows through associated production supply chain and consumption activities. Integrated with economic models; this system can predict the possible overloading on the current waste management facility capacities and provide decision support for designing strategies to approach resource sustainability. The limitations of current system are specified for directing further enhancement of functionalities.

Firefighter safety for PV systems: Overview of future requirements and protection systems

DEFF Research Database (Denmark)

Spataru, Sergiu; Sera, Dezso; Blaabjerg, Frede

2013-01-01

for operators during maintenance or fire-fighting. One of the solutions is individual module shutdown by short-circuiting or disconnecting each PV module from the PV string. However, currently no standards have been adopted either for implementing or testing these methods, or doing an evaluation of the module...... shutdown procedures. This paper gives an overview on the most recent fire - and firefighter safety requirements for PV systems, with focus on system and module shutdown systems. Several solutions are presented, analyzed and compared by considering a number of essential characteristics, including......An important and highly discussed safety issue for photovoltaic systems is that, as long as they are illuminated, a high voltage is present at the PV string terminals and cables between the string and inverters, independent of the state of the inverter's dc disconnection switch, which poses a risk...

Overview of expert systems applications in Westinghouse Nuclear Fuel Activities

International Nuclear Information System (INIS)

Leech, W.J.

1989-01-01

Expert system applications have been introduced in several nuclear fuel activities, including engineering and manufacturing. This technology has been successfully implemented on the manufacturing floors to provide on-line process control at zirconium tubing and fuel fabrication plants. This paper provides an overview of current applications at Westinghouse with respect to fuel fabrication, zirconium tubing, zirconium production, and core design

Environmental Management System

Science.gov (United States)

Goals Recycling Green Purchasing Pollution Prevention Reusing Water Resources Environmental Management Stewardship » Environmental Protection » Environmental Management System Environmental Management System An Environmental Management System is a systematic method for assessing mission activities, determining the

Life cycle costing of waste management systems: overview, calculation principles and case studies.

Science.gov (United States)

Martinez-Sanchez, Veronica; Kromann, Mikkel A; Astrup, Thomas Fruergaard

2015-02-01

This paper provides a detailed and comprehensive cost model for the economic assessment of solid waste management systems. The model was based on the principles of Life Cycle Costing (LCC) and followed a bottom-up calculation approach providing detailed cost items for all key technologies within modern waste systems. All technologies were defined per tonne of waste input, and each cost item within a technology was characterised by both a technical and an economic parameter (for example amount and cost of fuel related to waste collection), to ensure transparency, applicability and reproducibility. Cost items were classified as: (1) budget costs, (2) transfers (for example taxes, subsidies and fees) and (3) externality costs (for example damage or abatement costs related to emissions and disamenities). Technology costs were obtained as the sum of all cost items (of the same type) within a specific technology, while scenario costs were the sum of all technologies involved in a scenario. The cost model allows for the completion of three types of LCC: a Conventional LCC, for the assessment of financial costs, an Environmental LCC, for the assessment of financial costs whose results are complemented by a Life Cycle Assessment (LCA) for the same system, and a Societal LCC, for socio-economic assessments. Conventional and Environmental LCCs includes budget costs and transfers, while Societal LCCs includes budget and externality costs. Critical aspects were found in the existing literature regarding the cost assessment of waste management, namely system boundary equivalency, accounting for temporally distributed emissions and impacts, inclusions of transfers, the internalisation of environmental impacts and the coverage of shadow prices, and there was also significant confusion regarding terminology. The presented cost model was implemented in two case study scenarios assessing the costs involved in the source segregation of organic waste from 100,000 Danish households and

An Overview of Liquid Fluoride Salt Heat Transport Systems

Energy Technology Data Exchange (ETDEWEB)

Holcomb, David Eugene [ORNL; Cetiner, Sacit M [ORNL

2010-09-01

Heat transport is central to all thermal-based forms of electricity generation. The ever increasing demand for higher thermal efficiency necessitates power generation cycles transitioning to progressively higher temperatures. Similarly, the desire to provide direct thermal coupling between heat sources and higher temperature chemical processes provides the underlying incentive to move toward higher temperature heat transfer loops. As the system temperature rises, the available materials and technology choices become progressively more limited. Superficially, fluoride salts at {approx}700 C resemble water at room temperature being optically transparent and having similar heat capacity, roughly three times the viscosity, and about twice the density. Fluoride salts are a leading candidate heat-transport material at high temperatures. Fluoride salts have been extensively used in specialized industrial processes for decades, yet they have not entered widespread deployment for general heat transport purposes. This report does not provide an exhaustive screening of potential heat transfer media and other high temperature liquids such as alkali metal carbonate eutectics or chloride salts may have economic or technological advantages. A particular advantage of fluoride salts is that the technology for their use is relatively mature as they were extensively studied during the 1940s-1970s as part of the U.S. Atomic Energy Commission's program to develop molten salt reactors (MSRs). However, the instrumentation, components, and practices for use of fluoride salts are not yet developed sufficiently for commercial implementation. This report provides an overview of the current understanding of the technologies involved in liquid salt heat transport (LSHT) along with providing references to the more detailed primary information resources. Much of the information presented here derives from the earlier MSR program. However, technology has evolved over the intervening years

LCA-IWM: A decision support tool for sustainability assessment of waste management systems

International Nuclear Information System (INIS)

Boer, J. den; Boer, E. den; Jager, J.

2007-01-01

The paper outlines the most significant result of the project 'The use of life cycle assessment tools for the development of integrated waste management strategies for cities and regions with rapid growing economies', which was the development of two decision-support tools: a municipal waste prognostic tool and a waste management system assessment tool. The article focuses on the assessment tool, which supports the adequate decision making in the planning of urban waste management systems by allowing the creation and comparison of different scenarios, considering three basic subsystems: (i) temporary storage; (ii) collection and transport and (iii) treatment, disposal and recycling. The design and analysis options, as well as the assumptions made for each subsystem, are shortly introduced, providing an overview of the applied methodologies and technologies. The sustainability assessment methodology used in the project to support the selection of the most adequate scenario is presented with a brief explanation of the procedures, criteria and indicators applied on the evaluation of each of the three sustainability pillars

Spatial Data Management

CERN Document Server

Mamoulis, Nikos

2011-01-01

Spatial database management deals with the storage, indexing, and querying of data with spatial features, such as location and geometric extent. Many applications require the efficient management of spatial data, including Geographic Information Systems, Computer Aided Design, and Location Based Services. The goal of this book is to provide the reader with an overview of spatial data management technology, with an emphasis on indexing and search techniques. It first introduces spatial data models and queries and discusses the main issues of extending a database system to support spatial data.

An overview of MEDM

International Nuclear Information System (INIS)

Evans, K. Jr.

1999-01-01

MEDM, which is derived from Motif Editor and Display Manager, is the primary graphical user interface to the EPICS control system and has also been used for other control systems. MEDM has two modes of operation, EDIT and EXECUTE. In its EDIT mode it provides the drawing tools needed to design control screens for operator interfaces. In its EXECUTE mode it manages those screens to communicate with the control system. MEDM provides a set of interface objects that falls into three main categories: (1) Monitors, such as text, meters, and plots; (2) Controllers, such as buttons, menus, and sliders; and (3) Drawing Objects, such as lines, rectangles, and images. Each of these objects has many options, allowing for the development of screens ranging from simple to quite sophisticated. MEDM has been developed over the last decade, primarily at Argonne National Laboratory, and is a large, well tested, extensively used program. It runs on most flavors of UNIX, VMS, and Windows 95/98/NT. It has been used to design thousands of control screens, such as the one shown in Fig. 1, at the Advanced Photon Source and other sites around the world. This paper presents an overview of MEDM and its features

The European Activation System. EASY-2001 overview

International Nuclear Information System (INIS)

Forrest, R.A.

2001-03-01

This document gives an overview of the European Activation System (EASY) as released in 2001. EASY-2001 consists of a wide range of codes, data and documentation all aimed at satisfying the objective of calculating the response of materials irradiated in a neutron flux. It is designed to investigate fusion devices that will act as intense sources of high energy (14 MeV) neutrons and cause significant activation of the surrounding materials. However, the very general nature of the calculational method and the data libraries means that it is applicable (with some reservations) to all situations (e.g. fission reactors or neutron sources) where materials are exposed to neutrons below 20 MeV

Principles, operations, and expected performance of the LISA Pathfinder charge management system

Energy Technology Data Exchange (ETDEWEB)

Ziegler, T [Astrium GmbH, 88039 Friedrichshafen (Germany); Fichter, W [iFR, Universitaet Stuttgart, Pfaffenwaldring 7a, 70569 Stuttgart (Germany); Schulte, M [Blackett Laboratory, Imperial College, Prince Consort Road, London SW7 2BZ (United Kingdom); Vitale, S, E-mail: tobias.ziegler@astrium.eads.ne [Department of Physics, University of Trento, 38050 Povo, Trento (Italy)

2009-03-01

The test masses of LISA Pathfinder are free flying and therefore not grounded to the spacecraft by a wire. Because of galactic cosmic rays, solar energetic particles, and unknown microscopic surface effects during initial test mass release, an unacceptable level of absolute charge might be present on the test masses. A charged test mass can endanger transition to high accuracy control modes which are required for science experiments. Furthermore, charged test masses introduce unwanted disturbance accelerations for example due to Coulomb interactions with surrounding conducting surfaces. The charge management system is designed to discharge the test masses up to a tolerable level of absolute charge such that the mission goal can be achieved. It is therefore an essential part of the experiments to be performed with the LISA Technology Package. The paper describes charge management tasks to be performed on board the spacecraft and summarizes the principles of charge measurement and discharge control. An overview of the experiment operations is given where the interconnection of operational charge management system modes and operational modes of the drag-free, suspension and attitude control system is considered. Simulated performance results are presented.

Overview of Risk Management for Engineered Nanomaterials

Science.gov (United States)

Schulte, P. A.; Geraci, C. L.; Hodson, L. L.; Zumwalde, R. D.; Kuempel, E. D.; Murashov, V.; Martinez, K. F.; Heidel, D. S.

2013-04-01

Occupational exposure to engineered nanomaterials (ENMs) is considered a new and challenging occurrence. Preliminary information from laboratory studies indicates that workers exposed to some kinds of ENMs could be at risk of adverse health effects. To protect the nanomaterial workforce, a precautionary risk management approach is warranted and given the newness of ENMs and emergence of nanotechnology, a naturalistic view of risk management is useful. Employers have the primary responsibility for providing a safe and healthy workplace. This is achieved by identifying and managing risks which include recognition of hazards, assessing exposures, characterizing actual risk, and implementing measures to control those risks. Following traditional risk management models for nanomaterials is challenging because of uncertainties about the nature of hazards, issues in exposure assessment, questions about appropriate control methods, and lack of occupational exposure limits (OELs) or nano-specific regulations. In the absence of OELs specific for nanomaterials, a precautionary approach has been recommended in many countries. The precautionary approach entails minimizing exposures by using engineering controls and personal protective equipment (PPE). Generally, risk management utilizes the hierarchy of controls. Ideally, risk management for nanomaterials should be part of an enterprise-wide risk management program or system and this should include both risk control and a medical surveillance program that assesses the frequency of adverse effects among groups of workers exposed to nanomaterials. In some cases, the medical surveillance could include medical screening of individual workers to detect early signs of work-related illnesses. All medical surveillance should be used to assess the effectiveness of risk management; however, medical surveillance should be considered as a second line of defense to ensure that implemented risk management practices are effective.

Overview of Risk Management for Engineered Nanomaterials

International Nuclear Information System (INIS)

Schulte, P A; Geraci, C L; Hodson, L L; Zumwalde, R D; Kuempel, E D; Murashov, V; Martinez, K F; Heidel, D S

2013-01-01

Occupational exposure to engineered nanomaterials (ENMs) is considered a new and challenging occurrence. Preliminary information from laboratory studies indicates that workers exposed to some kinds of ENMs could be at risk of adverse health effects. To protect the nanomaterial workforce, a precautionary risk management approach is warranted and given the newness of ENMs and emergence of nanotechnology, a naturalistic view of risk management is useful. Employers have the primary responsibility for providing a safe and healthy workplace. This is achieved by identifying and managing risks which include recognition of hazards, assessing exposures, characterizing actual risk, and implementing measures to control those risks. Following traditional risk management models for nanomaterials is challenging because of uncertainties about the nature of hazards, issues in exposure assessment, questions about appropriate control methods, and lack of occupational exposure limits (OELs) or nano-specific regulations. In the absence of OELs specific for nanomaterials, a precautionary approach has been recommended in many countries. The precautionary approach entails minimizing exposures by using engineering controls and personal protective equipment (PPE). Generally, risk management utilizes the hierarchy of controls. Ideally, risk management for nanomaterials should be part of an enterprise-wide risk management program or system and this should include both risk control and a medical surveillance program that assesses the frequency of adverse effects among groups of workers exposed to nanomaterials. In some cases, the medical surveillance could include medical screening of individual workers to detect early signs of work-related illnesses. All medical surveillance should be used to assess the effectiveness of risk management; however, medical surveillance should be considered as a second line of defense to ensure that implemented risk management practices are effective.

Overview of the ATLAS distributed computing system

CERN Document Server

Elmsheuser, Johannes; The ATLAS collaboration

2018-01-01

The CERN ATLAS experiment successfully uses a worldwide computing infrastructure to support the physics program during LHC Run 2. The grid workflow system PanDA routinely manages 250 to 500 thousand concurrently running production and analysis jobs to process simulation and detector data. In total more than 300 PB of data is distributed over more than 150 sites in the WLCG and handled by the ATLAS data management system Rucio. To prepare for the ever growing LHC luminosity in future runs new developments are underway to even more efficiently use opportunistic resources such as HPCs and utilize new technologies. This presentation will review and explain the outline and the performance of the ATLAS distributed computing system and give an outlook to new workflow and data management ideas for the beginning of the LHC Run 3.

Multiple trauma in children: critical care overview.

Science.gov (United States)

Wetzel, Randall C; Burns, R Cartland

2002-11-01

Multiple trauma is more than the sum of the injuries. Management not only of the physiologic injury but also of the pathophysiologic responses, along with integration of the child's emotional and developmental needs and the child's family, forms the basis of trauma care. Multiple trauma in children also elicits profound psychological responses from the healthcare providers involved with these children. This overview will address the pathophysiology of multiple trauma in children and the general principles of trauma management by an integrated trauma team. Trauma is a systemic disease. Multiple trauma stimulates the release of multiple inflammatory mediators. A lethal triad of hypothermia, acidosis, and coagulopathy is the direct result of trauma and secondary injury from the systemic response to trauma. Controlling and responding to the secondary pathophysiologic sequelae of trauma is the cornerstone of trauma management in the multiply injured, critically ill child. Damage control surgery is a new, rational approach to the child with multiple trauma. The selection of children for damage control surgery depends on the severity of injury. Major abdominal vascular injuries and multiple visceral injuries are best considered for this approach. The effective management of childhood multiple trauma requires a combined team approach, consideration of the child and family, an organized trauma system, and an effective quality assurance and improvement mechanism.

Systems engineering simplified

CERN Document Server

Cloutier, Robert; Bone, Mary Alice

2015-01-01

IntroductionOverviewDiscussion of Common TerminologyThe Case for Systems EngineeringA Brief History of Systems EngineeringSystem ExamplesSummaryThe System Life CycleManaging System Development-The Vee ModelSystem ProductionSystem Utilization and SupportSystem Retirement and DisposalOther Systems Engineering Development ModelsSpiral ModelAgile Model for Systems EngineeringSystem of InterestAbstraction and DecompositionIntegrationDeveloping and Managing RequirementsCyclone Requiremen

ON EXPERIENCE OF THE COLLABORATION AND PROJECT MANAGEMENT INFORMATION SYSTEM PODIO IMPLEMENTATION IN THE MEDICAL UNIVERSITY

Directory of Open Access Journals (Sweden)

Andrii V. Semenets

2014-12-01

Full Text Available The Information Technologies role in the medical university management is analyzed. The importance of the application of the electronic document management in the medical universities is shown. The implementation capabilities of the electronic document management system within a cloud services are shown. A Podio collaboration and project management cloud service features overview is presented. The methodology of the Podio capabilities usage to the medical university task management solving is developed. An approaches to the Podio Workspaces and Applications development for the faculties collaboration and project management in the departments of the medical universities are presented. The examples of the Podio features usage to the work-flow automation of the information-analytical and hardware and software support departments of the Ternopil State Medical University named after I. Ja. Horbachevsky are shown.

DNV RP-F116 integrity management of submarine pipeline system

Energy Technology Data Exchange (ETDEWEB)

Leinum, B.H.; Etterdal, B. [Det Norske Veritas (DNV), Hoevik (Norway); Augustinovic, Z. [Dong Energy, Fredericia (Denmark); Paula, A. [Det Norske Veritas (DNV), Rio de Janeiro, RJ (Brazil)

2009-12-19

The need to keep pipelines operating safely and efficiently is paramount for any operator. Additionally, there is an increasing awareness at both regulatory and public level. Authorities around the world are adopting a more proactive approach as they seek to minimize the risk of human injuries or harm to the environment resulting from pipeline leaks. A joint industry project (JIP) led by DNV Energy is formulating guidelines for how to manage the integrity of submarine pipeline system. The resultant document of recommended practice, DNV RP-F116, will provide the oil and gas industry with a useful tool in an area where no such formal guidance currently exists. This paper gives an overview of the RP and demonstrates the use with a case study for the Siri field. The Siri field is operated by DONG Energy, Denmark and all infield pipelines were subjected to an integrity assessment using the Integrity Management process as outlined in the upcoming DNV RP-116. In parallel with establishing the RP, DNV has further developed the web-based software system, Orbit+, which is aligned with the RP. The software system is implemented and used by Dong Energy. (author)

Joint Polar Satellite System (JPSS) Common Ground System (CGS) Overview and Architectural Tenets

Science.gov (United States)

Miller, S. W.; Grant, K. D.; Jamilkowski, M. L.

2013-12-01

The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather and environmental satellite system: the Joint Polar Satellite System (JPSS). The Joint Polar Satellite System will replace the afternoon orbit component and ground processing system of the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA. The JPSS satellites will carry a suite of sensors designed to collect meteorological, oceanographic, climatological and geophysical observations of the Earth. The ground processing system for JPSS is known as the JPSS Common Ground System (JPSS CGS). Developed and maintained by Raytheon Intelligence and Information Systems (IIS), the CGS is a multi-mission enterprise system serving NOAA, NASA and their national and international partners. The CGS provides a wide range of support to a number of missions: 1) Command and control and mission management for the Suomi National Polar Partnership (S-NPP) mission today, expanding this support to the JPSS-1 satellite and the Polar Free Flyer mission in 2017 2) Data acquisition via a Polar Receptor Network (PRN) for S-NPP, the Japan Aerospace Exploration Agency's (JAXA) Global Change Observation Mission - Water (GCOM-W1), POES, and the Defense Meteorological Satellite Program (DMSP) and Coriolis/WindSat for the Department of Defense (DoD) 3) Data routing over a global fiber Wide Area Network (WAN) for S-NPP, JPSS-1, Polar Free Flyer, GCOM-W1, POES, DMSP, Coriolis/WindSat, the NASA Space Communications and Navigation (SCaN, which includes several Earth Observing System [EOS] missions), MetOp for the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT), and the National Science Foundation (NSF) 4) Environmental data processing and distribution for S-NPP, GCOM-W1 and JPSS-1 The CGS architecture will receive a technology refresh in 2015 to satisfy several key

Construction of BIM-based SMART-ITL Facility Management System

International Nuclear Information System (INIS)

Jeon, Woo-Jin; Yi, Sung-Jae; Park, Hyun-Sik; Ryu, Sung-Uk; Bae, Hwang; Hwang, Sang-Chul; Min, Byung-Eui

2015-01-01

The flow area and volume are scaled down to 1/49. The ratio of the hydraulic diameter is 1/7. Therefore, SMART-ITL is a large-scale thermalhydraulic test facility with about 45 m height, which is consisted of 10 m underground and 35 m from the ground level. Until now, the management of design data and maintenance of large scale test facilities have been managed based on hard-copy information. Recently, Thermal Hydraulics Safety Research Division (THSRD) at Korea Atomic Energy Research Institute (KAERI) has developed Facility Management System (FMS) based Building Information Modeling (BIM) to manage its design data more effectively for these large scale test facilities of SMART-ITL and ATLAS, and this BIM technology has been applied to SMART-ITL at the first. This study proposed a method of effective management and maintenance of design data applied to the SMART-ITL. That is, a FMS was developed based on the BIM technology for SMART-ITL. Figure 2 shows an overview of FMS development process based on BIM technology. SMART-ITL FMS facilitates its management and maintenance more effectively and accurately by 3- dimensional visualization. It enables the shape information of large scale test facilities to be visualized intuitively in a virtual space, and the efficient maintenance of data and instruments is possible by linking 3D shape information

Construction of BIM-based SMART-ITL Facility Management System

Energy Technology Data Exchange (ETDEWEB)

Jeon, Woo-Jin; Yi, Sung-Jae; Park, Hyun-Sik; Ryu, Sung-Uk; Bae, Hwang [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Hwang, Sang-Chul; Min, Byung-Eui [DDRsoft Co., Daejeon (Korea, Republic of)

2015-10-15

The flow area and volume are scaled down to 1/49. The ratio of the hydraulic diameter is 1/7. Therefore, SMART-ITL is a large-scale thermalhydraulic test facility with about 45 m height, which is consisted of 10 m underground and 35 m from the ground level. Until now, the management of design data and maintenance of large scale test facilities have been managed based on hard-copy information. Recently, Thermal Hydraulics Safety Research Division (THSRD) at Korea Atomic Energy Research Institute (KAERI) has developed Facility Management System (FMS) based Building Information Modeling (BIM) to manage its design data more effectively for these large scale test facilities of SMART-ITL and ATLAS, and this BIM technology has been applied to SMART-ITL at the first. This study proposed a method of effective management and maintenance of design data applied to the SMART-ITL. That is, a FMS was developed based on the BIM technology for SMART-ITL. Figure 2 shows an overview of FMS development process based on BIM technology. SMART-ITL FMS facilitates its management and maintenance more effectively and accurately by 3- dimensional visualization. It enables the shape information of large scale test facilities to be visualized intuitively in a virtual space, and the efficient maintenance of data and instruments is possible by linking 3D shape information.

Building control. Technical building systems: Automation and management; Building Control. Technische Gebaeudesysteme: Automation und Bewirtschaftung

Energy Technology Data Exchange (ETDEWEB)

Kranz, H.R.; Baenninger, M.; Bieler, P.; Brettschneider, J.P.; Damnig, A.; Fassbender, H.W.; Friedrichs, K.; Gauchel, J.; Hegewald, B.; Kaelin, W.; Lezius, A.; Markert, H.; Oehler, A.; Otto, J.; Puettmer, M. Jr.; Rohrbacher, H.; Schuerdt, K.; Vogt, D.; Wittling, J.

1995-12-31

Cost-optimised management and maintenance of buildings can no longer be carried out without electronic data processing. The present anthology gives a comprehensive overview of the planning and operation of building automation systems. The following topics are discussed: ecological cooling and facade concepts, facility management, jeopardy alarm technology, building automation, communication technology, open communication and networks, building system technology, norms and directives, building right and law. A special abstract has been prepared for each of the 23 chapters. (BWI). 260 figs., 161 refs. [Deutsch] Kostenoptimiertes Management, Bewirtschaftung und Instandhaltung von Gebaeuden sind ohne EDV nicht mehr denkbar. Das vorliegende Buch gibt einen umfassenden Ueberblick ueber Planung und Betrieb von Gebaeudeautomationssystemen. Es wird dabei auf folgende Themenkomplexe eingegangen: Oekologische Kuehl- und Fassadenkonzepte; Facility Management, Gefahrenmeldetechnik, Gebaeudeautomation; Kommunikationstechnik, offenen Kommunikation und Netzwerke; Gebaeudesystemtechnik und Installationsbus; Energiemanagement; Betreibererfahrungen; Normen und Richtlinien; Baurecht und Gesetz. Fuer alle 23 Einzelkapitel wurde eine gesonderte inhaltliche Erschliessung durchgefuehrt. (BWI)

Greenhouse Gas Emissions From Energy Systems: Comparison And Overview

International Nuclear Information System (INIS)

Dones, R.; Heck, T.; Hirschberg, S.

2004-01-01

The paper provides an overview and comparison of Greenhouse Gas Emissions associated with fossil, nuclear and renewable energy systems. In this context both the direct technology-specific emissions and the contributions from full energy chains within the Life Cycle Assessment framework are considered. Examples illustrating the differences between countries and regional electricity mixes are also provided. Core results presented here are based on the work performed at PSI, and by partners within the Swiss Centre for Life-Cycle Inventories. (author)

Greenhouse Gas Emissions From Energy Systems: Comparison And Overview

Energy Technology Data Exchange (ETDEWEB)

Dones, R.; Heck, T.; Hirschberg, S

2004-03-01

The paper provides an overview and comparison of Greenhouse Gas Emissions associated with fossil, nuclear and renewable energy systems. In this context both the direct technology-specific emissions and the contributions from full energy chains within the Life Cycle Assessment framework are considered. Examples illustrating the differences between countries and regional electricity mixes are also provided. Core results presented here are based on the work performed at PSI, and by partners within the Swiss Centre for Life-Cycle Inventories. (author)

Maintenance management systems

International Nuclear Information System (INIS)

Rohan, M. de

1989-01-01

This paper is concerned principally with Maintenance Management systems and their effective introduction into organisations. Maintenance improvement is basically a problem of managing the maintenance department in the broadest sense. Improvement does not only lie in the area of special techniques, systems or procedures; although they are valuable tools, but rather in a balanced attack, carefully guided by management. Over recent years, maintenance systems have received the major emphasis and in many instances the selection of the system has become a pre-occupation, whereas the importance of each maintenance function must be recognised and good management practices applied to all maintenance activities. The ingredients for success in the implementation of maintenance management systems are summarised as: having a management committee, clear objectives, project approach using project management techniques and an enthusiastic leader, user managed and data processing supported project, realistic budget and an understanding of the financial audit requirements. (author)

Implementation of an indicator-based safety management system for the EnKK NPP's

International Nuclear Information System (INIS)

Bassing, G.; Nasellu, M.; Ritter, J.

2004-01-01

This presentation at the Eurosafe Berlin 2004 will give an overview of the activities on safety management of EnBW Kernkraft GmbH taken up with a notifiable event in August 2001 at KKP 2 nuclear site. After this event EnBW announced the development and introduction of an indicator-based safety management system (SMS) at all sites of its nuclear power plants. A SMS team with members from all NPP sites was built which had to analyse all processes based on the DIN EN ISO 9000 philosophy and to control them by indicators. The regulatory authorities and their experts would accompany this process in a suitable fashion and monitor and review it after its introduction. This presentation shows the process during the development of the system, the status of its introduction and the general involvement of the regulator. (orig.)

Bridge Management Systems

DEFF Research Database (Denmark)

Thoft-Christensen, Palle

In this paper bridge management systems are discussed with special emphasis on management systems for reinforced concrete bridges. Management systems for prestressed concrete bridges, steel bridges, or composite bridges can be developed in a similar way....

Thermalization and prethermalization in isolated quantum systems: a theoretical overview

Science.gov (United States)

Mori, Takashi; Ikeda, Tatsuhiko N.; Kaminishi, Eriko; Ueda, Masahito

2018-06-01

The approach to thermal equilibrium, or thermalization, in isolated quantum systems is among the most fundamental problems in statistical physics. Recent theoretical studies have revealed that thermalization in isolated quantum systems has several remarkable features, which emerge from quantum entanglement and are quite distinct from those in classical systems. Experimentally, well isolated and highly controllable ultracold quantum gases offer an ideal testbed to study the nonequilibrium dynamics in isolated quantum systems, promoting intensive recent theoretical endeavors on this fundamental subject. Besides thermalization, many isolated quantum systems show intriguing behavior in relaxation processes, especially prethermalization. Prethermalization occurs when there is a clear separation of relevant time scales and has several different physical origins depending on individual systems. In this review, we overview theoretical approaches to the problems of thermalization and prethermalization.

Oral submucous fibrosis: an overview of the aetiology, pathogenesis, classification, and principles of management.

Science.gov (United States)

Arakeri, Gururaj; Brennan, Peter A

2013-10-01

Oral submucous fibrosis (OSMF) is a complex, debilitating, and precancerous condition. Formerly confined to the Indian subcontinent, it is now often seen in the Asian populations of the United Kingdom, USA, and other developed countries, and is therefore a serious problem for global health. The well-known causative agent of the disease, areca-nut is now recognised as a group one carcinogen. We review and discuss all components of OSMF, including the terminology, presentation, aetiology, and pathogenesis, and provide a brief overview of its management. Copyright © 2012 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Overview of Causes and Control of Nitrification in Chloraminated Drinking Water Distribution Systems

Science.gov (United States)

This chapter provides an integrated overview of nitrification causes and control in chloraminated drinking water distribution systems, leading to an in-depth discussion of nitrification microbiology, monitoring, prevention, response, and engineering improvements in subsequent man...

RISK MANAGEMENT IN A LARGE-SCALE NEW RAILWAY TRANSPORT SYSTEM PROJECT

Directory of Open Access Journals (Sweden)

Sunduck D. SUH, Ph.D., P.E.

2000-01-01

Full Text Available Risk management experiences of the Korean Seoul-Pusan high-speed railway (KTX project since the planning stage are evaluated. One can clearly see the interplay of engineering and construction risks, financial risks and political risks in the development of the KTX project, which is the peculiarity of large-scale new railway system projects. A brief description on evaluation methodology and overview of the project is followed by detailed evaluations on key differences in risks between conventional railway system and high-speed railway system, social and political risks, engineering and construction risks, and financial risks. Risks involved in system procurement process, such as proposal solicitation, evaluation, selection, and scope of solicitation are separated out and evaluated in depth. Detailed events resulting from these issues are discussed along with their possible impact on system risk. Lessons learned and further possible refinements are also discussed.

Maintenance and management system

International Nuclear Information System (INIS)

Ando, Yasumasa.

1992-01-01

Since highly reliable operation is required in a nuclear power plant, monitoring during operation and periodical inspection are conducted carefully. The present invention provides maintenance and management systems for providing an aid so that these systems are combined effectively and operated rationally based on unified information management. That is, the system contains data bases comprising information for the design of the equipments and pipelines of a plant, information for the exchange of equipment parts, information for the history of plant operation, information for the monitoring and inspection, and information for the management of repair operation. In addition, it has an equipment part history management sub-system for managing equipment part exchange information, an operation history management sub-system for managing the operation state of the plant, an operation history management sub-system for managing equipment monitoring inspection data and operation management sub-system for managing periodical inspection/ repairing operation. These sub-systems are collectively combined to manage the maintenance and management jobs of the plant unitarily. (I.S.)

Changing forest management strategies in Sudan : a challenge for forestry educational systems

NARCIS (Netherlands)

Mahir, S.S.

1996-01-01

This study is an effort to understand the way various categories of social actors go about their interaction with the management of forest resources in Sudan. By providing an overview and description of the motives, perceptions, and management objectives and strategies of social actors,

Current Concepts in the Mandibular Condyle Fracture Management Part I: Overview of Condylar Fracture

Directory of Open Access Journals (Sweden)

Kang-Young Choi

2012-07-01

Full Text Available The incidence of condylar fractures is high, but the management of fractures of the mandibular condyle continues to be controversial. Historically, maxillomandibular fixation, external fixation, and surgical splints with internal fixation systems were the techniques commonly used in the treatment of the fractured mandible. Condylar fractures can be extracapsular or intracapsular, undisplaced, deviated, displaced, or dislocated. Treatment depends on the age of the patient, the co-existence of other mandibular or maxillary fractures, whether the condylar fracture is unilateral or bilateral, the level and displacement of the fracture, the state of dentition and dental occlusion, and the surgeonnds on the age of the patient, the co-existence of othefrom which it is difficult to recover aesthetically and functionally;an appropriate treatment is required to reconstruct the shape and achieve the function ofthe uninjured status. To do this, accurate diagnosis, appropriate reduction and rigid fixation, and complication prevention are required. In particular, as mandibular condyle fracture may cause long-term complications such as malocclusion, particularly open bite, reduced posterior facial height, and facial asymmetry in addition to chronic pain and mobility limitation, great caution should be taken. Accordingly, the authors review a general overview of condyle fracture.

Current Concepts in the Mandibular Condyle Fracture Management Part I: Overview of Condylar Fracture

Directory of Open Access Journals (Sweden)

Kang-Young Choi

2012-07-01

Full Text Available The incidence of condylar fractures is high,but the management of fractures of the mandibularcondyle continues to be controversial. Historically, maxillomandibular fixation, externalfixation, and surgical splints with internal fixation systems were the techniques commonlyused in the treatment of the fractured mandible. Condylar fractures can be extracapsularor intracapsular, undisplaced, deviated, displaced, or dislocated. Treatment depends on theage of the patient, the co-existence of other mandibular or maxillary fractures, whether thecondylar fracture is unilateral or bilateral, the level and displacement of the fracture, thestate of dentition and dental occlusion, and the surgeonnds on the age of the patient, theco-existence of othefrom which it is difficult to recover aesthetically and functionally;anappropriate treatment is required to reconstruct the shape and achieve the function oftheuninjured status. To do this, accurate diagnosis, appropriate reduction and rigid fixation, andcomplication prevention are required. In particular, as mandibular condyle fracture may causelong-term complications such as malocclusion, particularly open bite, reduced posterior facialheight, and facial asymmetry in addition to chronic pain and mobility limitation, great cautionshould be taken. Accordingly, the authors review a general overview of condyle fracture.

Current Concepts in the Mandibular Condyle Fracture Management Part I: Overview of Condylar Fracture

Science.gov (United States)

Yang, Jung-Dug; Chung, Ho-Yun; Cho, Byung-Chae

2012-01-01

The incidence of condylar fractures is high, but the management of fractures of the mandibular condyle continues to be controversial. Historically, maxillomandibular fixation, external fixation, and surgical splints with internal fixation systems were the techniques commonly used in the treatment of the fractured mandible. Condylar fractures can be extracapsular or intracapsular, undisplaced, deviated, displaced, or dislocated. Treatment depends on the age of the patient, the co-existence of other mandibular or maxillary fractures, whether the condylar fracture is unilateral or bilateral, the level and displacement of the fracture, the state of dentition and dental occlusion, and the surgeonnds on the age of the patient, the co-existence of othefrom which it is difficult to recover aesthetically and functionally;an appropriate treatment is required to reconstruct the shape and achieve the function ofthe uninjured status. To do this, accurate diagnosis, appropriate reduction and rigid fixation, and complication prevention are required. In particular, as mandibular condyle fracture may cause long-term complications such as malocclusion, particularly open bite, reduced posterior facial height, and facial asymmetry in addition to chronic pain and mobility limitation, great caution should be taken. Accordingly, the authors review a general overview of condyle fracture. PMID:22872830

Strengthening biosecurity in Iraq: Development of a national biorisk management system

Directory of Open Access Journals (Sweden)

Gregory D Koblentz

2016-02-01

Full Text Available Since 2004, the Republic of Iraq has undertaken a concerted effort to comply with all of its international obligations to prevent the proliferation of chemical, biological, radiological, and nuclear (CBRN weapons. A centerpiece of this effort is Iraq’s development of a national biorisk management system to prevent, prepare for, and respond to naturally occurring and deliberate biological threats. The Iraqi National Monitoring Authority (INMA, which is responsible for CBRN security and nonproliferation in Iraq, has played a key role in establishing this system. This article provides an overview of Iraq’s international nonproliferation commitments, describes the legal and organizational steps it has taken to implement these commitments, and examines current initiatives to strengthen Iraq’s biosecurity.

Overview of the DIII-D program computer systems

International Nuclear Information System (INIS)

McHarg, B.B. Jr.

1997-11-01

Computer systems pervade every aspect of the DIII-D National Fusion Research program. This includes real-time systems acquiring experimental data from data acquisition hardware; cpu server systems performing short term and long term data analysis; desktop activities such as word processing, spreadsheets, and scientific paper publication; and systems providing mechanisms for remote collaboration. The DIII-D network ties all of these systems together and connects to the ESNET wide area network. This paper will give an overview of these systems, including their purposes and functionality and how they connect to other systems. Computer systems include seven different types of UNIX systems (HP-UX, REALIX, SunOS, Solaris, Digital UNIX, Ultrix, and IRIX), OpenVMS systems (both BAX and Alpha), MACintosh, Windows 95, and more recently Windows NT systems. Most of the network internally is ethernet with some use of FDDI. A T3 link connects to ESNET and thus to the Internet. Recent upgrades to the network have notably improved its efficiency, but the demand for bandwidth is ever increasing. By means of software and mechanisms still in development, computer systems at remote sites are playing an increasing role both in accessing and analyzing data and even participating in certain controlling aspects for the experiment. The advent of audio/video over the interest is now presenting a new means for remote sites to participate in the DIII-D program

Small supermarket management system

Institute of Scientific and Technical Information of China (English)

曹正

2016-01-01

This system USES the Java language in the MyEclipse platform development tool, SQL2005 as the database platform for data and data, the SQL2005 required for the user operating system. It mainly implements the daily management of goods, including purchase management, inventory management, sales management, personnel management and supplier management. The system can also complete the functions of browsing, querying, adding, deleting and modifying relevant information. This topic is the core of the stock management, inventory management and sales management, at the same time, the system also has the full user management and permissions management function..

Bio-Medical Waste Managment in a Tertiary Care Hospital: An Overview.

Science.gov (United States)

Pandey, Anita; Ahuja, Sanjiv; Madan, Molly; Asthana, Ajay Kumar

2016-11-01

Bio-Medical Waste (BMW) management is of utmost importance as its improper management poses serious threat to health care workers, waste handlers, patients, care givers, community and finally the environment. Simultaneously, the health care providers should know the quantity of waste generated in their facility and try to reduce the waste generation in day-to-day work because lesser amount of BMW means a lesser burden on waste disposal work and cost saving. To have an overview of management of BMW in a tertiary care teaching hospital so that effective interventions and implementations can be carried out for better outcome. The observational study was carried out over a period of five months from January 2016 to May 2016 in Chhatrapati Shivaji Subharti Hospital, Meerut by the Infection Control Team (ICT). Assessment of knowledge was carried out by asking set of questions individually and practice regarding awareness of BMW Management among the Health Care Personnel (HCP) was carried out by direct observation in the workplace. Further, the total BMW generated from the present setup in kilogram per bed per day was calculated by dividing the mean waste generated per day by the number of occupied beds. Segregation of BMW was being done at the site of generation in almost all the areas of the hospital in color coded polythene bags as per the hospital protocol. The different types of waste being collected were infectious solid waste in red bag, soiled infectious waste in yellow bag and sharp waste in puncture proof container and blue bag. Though awareness (knowledge) about segregation of BMW was seen in 90% of the HCP, 30%-35% did not practice. Out of the total waste generated (57912 kg.), 8686.8 kg. (15%) was infectious waste. Average infectious waste generated was 0.341 Kg per bed per day. The transport, treatment and disposal of each collected waste were outsourced and carried out by 'Synergy' waste management Pvt. Ltd. The practice of BMW Management was lacking in 30

Introduction to System Health Engineering and Management in Aerospace

Science.gov (United States)

Johnson, Stephen B.

2005-01-01

This paper provides a technical overview of Integrated System Health Engineering and Management (ISHEM). We define ISHEM as "the paper provides a techniques, and technologies used to design, analyze, build, verify, and operate a system to prevent faults and/or minimize their effects." This includes design and manufacturing techniques as well operational and managerial methods. ISHEM is not a "purely technical issue" as it also involves and must account for organizational, communicative, and cognitive f&ms of humans as social beings and as individuals. Thus the paper will discuss in more detail why all of these elements, h m the technical to the cognitive and social, are necessary to build dependable human-machine systems. The paper outlines a functional homework and architecture for ISHEM operations, describes the processes needed to implement ISHEM in the system life-cycle, and provides a theoretical framework to understand the relationship between the different aspects of the discipline. It then derives from these and the social and cognitive bases a set of design and operational principles for ISHEM.

Re-examining the Evidence in Radiation Dermatitis Management Literature: An Overview and a Critical Appraisal of Systematic Reviews

Energy Technology Data Exchange (ETDEWEB)

Chan, Raymond Javan, E-mail: email.rchan@gmail.com [Cancer Care Services, Royal Brisbane and Women' s Hospital (Australia); School of Nursing and Midwifery, University of Queensland, and Research Centre for Clinical and Community Practice Innovation, Griffith University (Australia); Larsen, Emily; Chan, Philip [Cancer Care Services, Royal Brisbane and Women' s Hospital (Australia)

2012-11-01

Purpose: To provide an overview and a critical appraisal of systematic reviews (SRs) of published interventions for the prevention/management of radiation dermatitis. Methods and Materials: We searched Medline, CINAHL, Embase, and the Cochrane Library. We also manually searched through individual reference lists of potentially eligible articles and a number of key journals in the topic area. Two authors screened all potential articles and included eligible SRs. Two authors critically appraised and extracted key findings from the included reviews using AMSTAR (the measurement tool for 'assessment of multiple systematic reviews'). Results: Of 1837 potential titles, 6 SRs were included. A number of interventions have been reported to be potentially beneficial for managing radiation dermatitis. Interventions evaluated in these reviews included skin care advice, steroidal/nonsteroidal topical agents, systemic therapies, modes of radiation delivery, and dressings. However, all the included SRs reported that there is insufficient evidence supporting any single effective intervention. The methodological quality of the included studies varied, and methodological shortfalls in these reviews might create biases to the overall results or recommendations for clinical practice. Conclusions: An up-to-date high-quality SR in the prevention/management of radiation dermatitis is needed to guide practice and direction for future research. We recommend that clinicians or guideline developers critically evaluate the information of SRs in their decision making.

Re-examining the Evidence in Radiation Dermatitis Management Literature: An Overview and a Critical Appraisal of Systematic Reviews

International Nuclear Information System (INIS)

Chan, Raymond Javan; Larsen, Emily; Chan, Philip

2012-01-01

Purpose: To provide an overview and a critical appraisal of systematic reviews (SRs) of published interventions for the prevention/management of radiation dermatitis. Methods and Materials: We searched Medline, CINAHL, Embase, and the Cochrane Library. We also manually searched through individual reference lists of potentially eligible articles and a number of key journals in the topic area. Two authors screened all potential articles and included eligible SRs. Two authors critically appraised and extracted key findings from the included reviews using AMSTAR (the measurement tool for “assessment of multiple systematic reviews”). Results: Of 1837 potential titles, 6 SRs were included. A number of interventions have been reported to be potentially beneficial for managing radiation dermatitis. Interventions evaluated in these reviews included skin care advice, steroidal/nonsteroidal topical agents, systemic therapies, modes of radiation delivery, and dressings. However, all the included SRs reported that there is insufficient evidence supporting any single effective intervention. The methodological quality of the included studies varied, and methodological shortfalls in these reviews might create biases to the overall results or recommendations for clinical practice. Conclusions: An up-to-date high-quality SR in the prevention/management of radiation dermatitis is needed to guide practice and direction for future research. We recommend that clinicians or guideline developers critically evaluate the information of SRs in their decision making.

Deepening our understanding of quality improvement in Europe (DUQuE): overview of a study of hospital quality management in seven countries

NARCIS (Netherlands)

Secanell, Mariona; Groene, Oliver; Arah, Onyebuchi A.; Lopez, Maria Andrée; Kutryba, Basia; Pfaff, Holger; Klazinga, Niek; Wagner, Cordula; Kristensen, Solvejg; Bartels, Paul Daniel; Garel, Pascal; Bruneau, Charles; Escoval, Ana; França, Margarida; Mora, Nuria; Suñol, Rosa; Kringos, D. S.; Lombarts, M. J. M. H.; Plochg, T.; Lopez, M. A.; Secanell, M.; Sunol, R.; Vallejo, P.; Bartels, P.; Kristensen, S.; Michel, P.; Saillour-Glenisson, F.; Vlcek, F.; Car, M.; Jones, S.; Klaus, E.; Bottaro, S.; Garel, P.; Saluvan, M.; Bruneau, C.; Depaigne-Loth, A.; Shaw, C.; Hammer, A.; Ommen, O.; Pfaff, H.; Groene, O.; Botje, D.; Wagner, C.; Kutaj-Wasikowska, H.; Kutryba, B.; Escoval, A.; Lívio, A.; Eiras, M.; Franca, M.; Leite, I.

2014-01-01

This paper provides an overview of the DUQuE (Deepening our Understanding of Quality Improvement in Europe) project, the first study across multiple countries of the European Union (EU) to assess relationships between quality management and patient outcomes at EU level. The paper describes the

Deepening our understanding of quality improvement in Europe (DUQuE): overview of a study of hospital quality management in seven countries.

NARCIS (Netherlands)

Secanell, M.; Groene, O.; Arah, O.A.; Lopez, M.A.; Kutryba, B.; Pfaff, H.; Klazinga, N.; Wagner, C.; Kristensen, S.; Bartels, P.D.; Garel, P.; Bruneau, C.; Escoval, A.; França, M.; Mora, N.; Suñol, R.

2014-01-01

Introduction and Objective: This paper provides an overview of the DUQuE (Deepening our Understanding of Quality Improvement in Europe) project, the first study across multiple countries of the European Union (EU) to assess relationships between quality management and patient outcomes at EU level.

Program overview

International Nuclear Information System (INIS)

Anon.

1977-01-01

The program overview describes the following resources and facilities; laser facilities, main laser room, target room, energy storage, laboratory area, building support systems, general plant project, and the new trailer complex

Overview analysis of bioenergy from livestock manure management in Taiwan

Energy Technology Data Exchange (ETDEWEB)

Tsai, Wen-Tien [Graduate Institute of Bioresources, National Pingtung University of Science and Technology, Pingtung 912 (China); Lin, Che-I [Department of Tropical Agriculture and International Cooperation, National Pingtung University of Science and Technology, Pingtung 912 (China)

2009-12-15

The emissions of greenhouse gases (GHGs) from the livestock manure are becoming significant energy and environmental issues in Taiwan. However, the waste management (i.e., anaerobic digestion) can produce the biogas associated with its composition mostly consisting of methane (CH{sub 4}), which is now considered as a renewable energy with emphasis on electricity generation and other energy uses. The objective of this paper was to present an overview analysis of biogas-to-bioenergy in Taiwan, which included five elements: current status of biogas sources and their energy utilizations, potential of biogas (methane) generation from livestock manure management, governmental regulations and policies for promoting biogas, benefits of GHGs (i.e., methane) emission reduction, and research and development status of utilizing livestock manure for biofuel production. In the study, using the livestock population data surveyed by the Council of Agriculture (Taiwan) and the emission factors recommended by the Intergovernmental Panel on Climate Change (IPCC), the potential of methane generation from livestock manure management in Taiwan during the period of 1995-2007 has been estimated to range from 36 to 56 Gg year{sup -1}, indicating that the biogas (methane) from swine and dairy cattle is abundant. Based on the characteristics of swine manure, the maximum potential of methane generation could reach to around 400 Gg year{sup -1}. With a practical basis of the total swine population (around 4300 thousand heads) from the farm scale of over 1000 heads, a preliminary analysis showed the following benefits: methane reduction of 21.5 Gg year{sup -1}, electricity generation of 7.2 x 10{sup 7} kW-h year{sup -1}, equivalent electricity charge saving of 7.2 x 0{sup 6} US$ year{sup -1}, and equivalent carbon dioxide mitigation of 500 Gg year{sup -1}. (author)

Evaluation of the dual digestion system 1: overview of the Milnerton experience

CSIR Research Space (South Africa)

Messenger, JR

1993-07-01

Full Text Available A number of advantages are claimed for dual digestion as a system for sewage sludge pasteurisation and stabilisation. In this paper, the first of a series of 4, an overview of a 4-year full-scale (45 m3 aerobic reactor and 500 m3 anaerobic digester...

Overview of adaptive phased management repository design development

International Nuclear Information System (INIS)

Russell, S.

2011-01-01

The Nuclear Waste Management Organization is implementing Adaptive Phased Management, Canada's plan for long-term management of used nuclear fuel. The organization is proceeding with the process for selecting a site in partnership with an informed and willing host community to safely and securely container and isolate used nuclear fuel in a deep geological repository in a suitable rock formation. Adaptive Phased Management is the culmination of more than 30 years of research, development and demonstration of repository concepts in Canada. Adaptive Phased Management uses a phased and adaptive step-wise approach to the multi-barrier system which is consistent with the long-term waste management approaches being developed in many other countries with nuclear power programs such as Sweden, Finland, Switzerland, the United Kingdom and France. The Nuclear Waste Management Organization is examining and developing conceptual designs for a deep geological repository and associated facilities for the placement of used nuclear fuel in long-lived containers. This paper will examine two of these generic conceptual designs which have recently been refined and updated. These conceptual designs will be used to support a pre-project review of repository design and safety by the Canadian Nuclear Safety Commission. (author)

Implementation strategies for health systems in low-income countries: an overview of systematic reviews.

Science.gov (United States)

Pantoja, Tomas; Opiyo, Newton; Lewin, Simon; Paulsen, Elizabeth; Ciapponi, Agustín; Wiysonge, Charles S; Herrera, Cristian A; Rada, Gabriel; Peñaloza, Blanca; Dudley, Lilian; Gagnon, Marie-Pierre; Garcia Marti, Sebastian; Oxman, Andrew D

2017-09-12

A key function of health systems is implementing interventions to improve health, but coverage of essential health interventions remains low in low-income countries. Implementing interventions can be challenging, particularly if it entails complex changes in clinical routines; in collaborative patterns among different healthcare providers and disciplines; in the behaviour of providers, patients or other stakeholders; or in the organisation of care. Decision-makers may use a range of strategies to implement health interventions, and these choices should be based on evidence of the strategies' effectiveness. To provide an overview of the available evidence from up-to-date systematic reviews about the effects of implementation strategies for health systems in low-income countries. Secondary objectives include identifying needs and priorities for future evaluations and systematic reviews on alternative implementation strategies and informing refinements of the framework for implementation strategies presented in the overview. We searched Health Systems Evidence in November 2010 and PDQ-Evidence up to December 2016 for systematic reviews. We did not apply any date, language or publication status limitations in the searches. We included well-conducted systematic reviews of studies that assessed the effects of implementation strategies on professional practice and patient outcomes and that were published after April 2005. We excluded reviews with limitations important enough to compromise the reliability of the review findings. Two overview authors independently screened reviews, extracted data and assessed the certainty of evidence using GRADE. We prepared SUPPORT Summaries for eligible reviews, including key messages, 'Summary of findings' tables (using GRADE to assess the certainty of the evidence) and assessments of the relevance of findings to low-income countries. We identified 7272 systematic reviews and included 39 of them in this overview. An additional four

Earth Science Informatics - Overview

Science.gov (United States)

Ramapriyan, H. K.

2017-01-01

Over the last 10-15 years, significant advances have been made in information management, there are an increasing number of individuals entering the field of information management as it applies to Geoscience and Remote Sensing data, and the field of informatics has come to its own. Informatics is the science and technology of applying computers and computational methods to the systematic analysis, management, interchange, and representation of science data, information, and knowledge. Informatics also includes the use of computers and computational methods to support decision making and applications. Earth Science Informatics (ESI, a.k.a. geoinformatics) is the application of informatics in the Earth science domain. ESI is a rapidly developing discipline integrating computer science, information science, and Earth science. Major national and international research and infrastructure projects in ESI have been carried out or are on-going. Notable among these are: the Global Earth Observation System of Systems (GEOSS), the European Commissions INSPIRE, the U.S. NSDI and Geospatial One-Stop, the NASA EOSDIS, and the NSF DataONE, EarthCube and Cyberinfrastructure for Geoinformatics. More than 18 departments and agencies in the U.S. federal government have been active in Earth science informatics. All major space agencies in the world, have been involved in ESI research and application activities. In the United States, the Federation of Earth Science Information Partners (ESIP), whose membership includes over 180 organizations (government, academic and commercial) dedicated to managing, delivering and applying Earth science data, has been working on many ESI topics since 1998. The Committee on Earth Observation Satellites (CEOS)s Working Group on Information Systems and Services (WGISS) has been actively coordinating the ESI activities among the space agencies.The talk will present an overview of current efforts in ESI, the role members of IEEE GRSS play, and discuss

Overview of Risk Mitigation for Safety-Critical Computer-Based Systems

Science.gov (United States)

Torres-Pomales, Wilfredo

2015-01-01

This report presents a high-level overview of a general strategy to mitigate the risks from threats to safety-critical computer-based systems. In this context, a safety threat is a process or phenomenon that can cause operational safety hazards in the form of computational system failures. This report is intended to provide insight into the safety-risk mitigation problem and the characteristics of potential solutions. The limitations of the general risk mitigation strategy are discussed and some options to overcome these limitations are provided. This work is part of an ongoing effort to enable well-founded assurance of safety-related properties of complex safety-critical computer-based aircraft systems by developing an effective capability to model and reason about the safety implications of system requirements and design.

Governance arrangements for health systems in low-income countries: an overview of systematic reviews

Science.gov (United States)

Herrera, Cristian A; Lewin, Simon; Paulsen, Elizabeth; Ciapponi, Agustín; Opiyo, Newton; Pantoja, Tomas; Rada, Gabriel; Wiysonge, Charles S; Bastías, Gabriel; Garcia Marti, Sebastian; Okwundu, Charles I; Peñaloza, Blanca; Oxman, Andrew D

2017-01-01

Background Governance arrangements include changes in rules or processes that determine authority and accountability for health policies, organisations, commercial products and health professionals, as well as the involvement of stakeholders in decision-making. Changes in governance arrangements can affect health and related goals in numerous ways, generally through changes in authority, accountability, openness, participation and coherence. A broad overview of the findings of systematic reviews can help policymakers, their technical support staff and other stakeholders to identify strategies for addressing problems and improving the governance of their health systems. Objectives To provide an overview of the available evidence from up-to-date systematic reviews about the effects of governance arrangements for health systems in low-income countries. Secondary objectives include identifying needs and priorities for future evaluations and systematic reviews on governance arrangements and informing refinements of the framework for governance arrangements outlined in the overview. Methods We searched Health Systems Evidence in November 2010 and PDQ Evidence up to 17 December 2016 for systematic reviews. We did not apply any date, language or publication status limitations in the searches. We included well-conducted systematic reviews of studies that assessed the effects of governance arrangements on patient outcomes (health and health behaviours), the quality or utilisation of healthcare services, resource use (health expenditures, healthcare provider costs, out-of-pocket payments, cost-effectiveness), healthcare provider outcomes (such as sick leave), or social outcomes (such as poverty, employment) and that were published after April 2005. We excluded reviews with limitations that were important enough to compromise the reliability of the findings of the review. Two overview authors independently screened reviews, extracted data and assessed the certainty of evidence

Computer aided system engineering and analysis (CASE/A) modeling package for ECLS systems - An overview

Science.gov (United States)

Dalee, Robert C.; Bacskay, Allen S.; Knox, James C.

1990-01-01

An overview of the CASE/A-ECLSS series modeling package is presented. CASE/A is an analytical tool that has supplied engineering productivity accomplishments during ECLSS design activities. A components verification program was performed to assure component modeling validity based on test data from the Phase II comparative test program completed at the Marshall Space Flight Center. An integrated plotting feature has been added to the program which allows the operator to analyze on-screen data trends or get hard copy plots from within the CASE/A operating environment. New command features in the areas of schematic, output, and model management, and component data editing have been incorporated to enhance the engineer's productivity during a modeling program.

New Management Tools – From Video Management Systems to Business Decision Systems

Directory of Open Access Journals (Sweden)

Emilian Cristian IRIMESCU

2015-06-01

Full Text Available In the last decades management was characterized by the increased use of Business Decision Systems, also called Decision Support Systems. More than that, systems that were until now used in a traditional way, for some simple activities (like security, migrated to the decision area of management. Some examples are the Video Management Systems from the physical security activity. This article will underline the way Video Management Systems passed to Business Decision Systems, which are the advantages of use thereof and which are the trends in this industry. The article will also analyze if at this moment Video Management Systems are real Business Decision Systems or if there are some functions missing to rank them at this level.

Delivery arrangements for health systems in low-income countries: an overview of systematic reviews.

Science.gov (United States)

Ciapponi, Agustín; Lewin, Simon; Herrera, Cristian A; Opiyo, Newton; Pantoja, Tomas; Paulsen, Elizabeth; Rada, Gabriel; Wiysonge, Charles S; Bastías, Gabriel; Dudley, Lilian; Flottorp, Signe; Gagnon, Marie-Pierre; Garcia Marti, Sebastian; Glenton, Claire; Okwundu, Charles I; Peñaloza, Blanca; Suleman, Fatima; Oxman, Andrew D

2017-09-13

Delivery arrangements include changes in who receives care and when, who provides care, the working conditions of those who provide care, coordination of care amongst different providers, where care is provided, the use of information and communication technology to deliver care, and quality and safety systems. How services are delivered can have impacts on the effectiveness, efficiency and equity of health systems. This broad overview of the findings of systematic reviews can help policymakers and other stakeholders identify strategies for addressing problems and improve the delivery of services. To provide an overview of the available evidence from up-to-date systematic reviews about the effects of delivery arrangements for health systems in low-income countries. Secondary objectives include identifying needs and priorities for future evaluations and systematic reviews on delivery arrangements and informing refinements of the framework for delivery arrangements outlined in the review. We searched Health Systems Evidence in November 2010 and PDQ-Evidence up to 17 December 2016 for systematic reviews. We did not apply any date, language or publication status limitations in the searches. We included well-conducted systematic reviews of studies that assessed the effects of delivery arrangements on patient outcomes (health and health behaviours), the quality or utilisation of healthcare services, resource use, healthcare provider outcomes (such as sick leave), or social outcomes (such as poverty or employment) and that were published after April 2005. We excluded reviews with limitations important enough to compromise the reliability of the findings. Two overview authors independently screened reviews, extracted data, and assessed the certainty of evidence using GRADE. We prepared SUPPORT Summaries for eligible reviews, including key messages, 'Summary of findings' tables (using GRADE to assess the certainty of the evidence), and assessments of the relevance of

Computer system validation: an overview of official requirements and standards.

Science.gov (United States)

Hoffmann, A; Kähny-Simonius, J; Plattner, M; Schmidli-Vckovski, V; Kronseder, C

1998-02-01

A brief overview of the relevant documents for companies in the pharmaceutical industry, which are to be taken into consideration to fulfil computer system validation requirements, is presented. We concentrate on official requirements and valid standards in the USA, European Community and Switzerland. There are basically three GMP-guidelines. their interpretations by the associations of interests like APV and PDA as well as the GAMP Suppliers Guide. However, the three GMP-guidelines imply the same philosophy about computer system validation. They describe more a what-to-do approach for validation, whereas the GAMP Suppliers Guide describes a how-to-do validation. Nevertheless, they do not contain major discrepancies.

Development of a plan for a national LLW information management system based on data acquired from a uniform manifest

International Nuclear Information System (INIS)

Gingerich, R.; Shimer, R.P.

1986-01-01

The Western Governors' Association (WGA), with funding from the Department of Energy's (DOE) National Low-Level Radioactive Waste Management Program, has completed an 18-month national project to develop a plan for a national low-level waste (LLW) information management system based on data from a uniform manifest for shipments of LLW. Under the plan, waste generators would fill out a manifest for a shipment just as they do currently, but they would use a nationally standard form. Shortly after a shipment arrives at a disposal facility or a processor, data from the manifest would be entered into the Program's Low-Level Waste Information Management System (LLWIMS). The data would be available via computer to state, compact and federal officials. This paper provides an overview of the plan for implementing and operating a national information management system linked to manifest data. It reports on the progress that has been made toward implementing the system and outlines the work that remains to be done. Finally, the paper examines the crucial role the system will play in the development of an acceptable system for managing the nation's LLW, particularly in the post-1986 transition period

Multimodal Dialogue Management - State of the art

NARCIS (Netherlands)

Bui Huu Trung, B.H.T.

This report is about the state of the art in dialogue management. We first introduce an overview of a multimodal dialogue system and its components. Second, four main approaches to dialogue management are described (finite-state and frame-based, information-state based and probabilistic, plan-based,

Atmospheric aerosol system: An overview

International Nuclear Information System (INIS)

Prospero, J.M.; Charlson, R.J.; Mohnen, V.; Jaenicke, R.; Delany, A.C.; Moyers, J.; Zoller, W.; Rahn, K.

1983-01-01

Aerosols could play a critical role in many processes which impact on our lives either indirectly (e.g., climate) or directly (e.g., health). However, our ability to assess these possible impacts is constrained by our limited knowledge of the physical and chemical properties of aerosols, both anthropogenic and natural. This deficiency is attributable in part to the fact that aerosols are the end product of a vast array of chemical and physical processes. Consequently, the properties of the aerosol can exhibit a great deal of variability in both time and space. Furthermore, most aerosol studies have focused on measurements of a single aerosol characteristic such as composition or size distribution. Such information is generally not useful for the assessment of impacts because the degree of impact may depend on the integral properties of the aerosol, for example, the aerosol composition as a function of particle size. In this overview we discuss recent work on atmospheric aerosols that illustrates the complex nature of the aerosol chemical and physical system, and we suggest strategies for future research. A major conclusion is that man has had a great impact on the global budgets of certain species, especially sulfur and nitrogen, that play a dominant role in the atmospheric aerosol system. These changes could conceivably affect climate. Large-scale impacts are implied because it has recently been demonstrated that natural and pollutant aerosol episodes can be propagated over great distances. However, at present there is no evidence linking anthropogenic activities with a persistent increase in aerosol concentrations on a global scale. A major problem in assessing man's impact on the atmospheric aerosol system and on global budgets is the absence of aerosol measurements in remote marine and continental areas

Heat management in integrated circuits on-chip and system-level monitoring and cooling

CERN Document Server

Ogrenci-Memik, Seda

2016-01-01

This essential overview covers the subject of thermal monitoring and management in integrated circuits. Specifically, it focuses on devices and materials that are intimately integrated on-chip (as opposed to in-package or on-board) for the purposes of thermal monitoring and thermal management.

Compatibility of DOE energy data bases with EEMIS data requirements. [Energy Emergency Management Information Systems

Energy Technology Data Exchange (ETDEWEB)

D& #x27; Acierno, J; Hermelee, A

1979-12-01

Object of this report is to present the data from EIA data bases which are compatible with the requirements of the data structure for the Energy Emergency Management Information System (EEMIS). An overview of data availability is briefly described and presented in the EEMIS petroleum and natural gas flow diagrams as well as in a more detailed review with each data element in the EEMIS data requirements. This information is presented with the intent that it be used as an overall system guide during the data transfer task as well as in future operation of EEMIS and in the interpretation of EEMIS data.

An overview of the TA-55, Building PF-4 ventilation system

International Nuclear Information System (INIS)

1994-01-01

An overview of the TA-55, Building PF-4 ventilation system is provided in the following sections. Included are descriptions of the zone configurations, equipment-performance criteria, ventilation support systems, and the ventilation-system evaluation criteria. Section 4.2.1.1 provides a brief discussion of the ventilation system function. Section 4.2.1.2 provides details on the overall system configuration. Details of system interfaces and support systems are provided in Section 4.2.1.3. Section 4.2.1.4 describes instrumentation and control needed to operate the ventilation system. Finally, Sections 4.2.1.5 and 4.2.1.6 describe system surveillance/maintenance and Technical Safety Requirements (TSR) Limitations, respectively. Note that the numerical parameters included in this description are considered nominal; set points and other specifications actually fall within operational bands

An overview of the TA-55, Building PF-4 ventilation system

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-02-22

An overview of the TA-55, Building PF-4 ventilation system is provided in the following sections. Included are descriptions of the zone configurations, equipment-performance criteria, ventilation support systems, and the ventilation-system evaluation criteria. Section 4.2.1.1 provides a brief discussion of the ventilation system function. Section 4.2.1.2 provides details on the overall system configuration. Details of system interfaces and support systems are provided in Section 4.2.1.3. Section 4.2.1.4 describes instrumentation and control needed to operate the ventilation system. Finally, Sections 4.2.1.5 and 4.2.1.6 describe system surveillance/maintenance and Technical Safety Requirements (TSR) Limitations, respectively. Note that the numerical parameters included in this description are considered nominal; set points and other specifications actually fall within operational bands.

Operations management system

Science.gov (United States)

Brandli, A. E.; Eckelkamp, R. E.; Kelly, C. M.; Mccandless, W.; Rue, D. L.

1990-01-01

The objective of an operations management system is to provide an orderly and efficient method to operate and maintain aerospace vehicles. Concepts are described for an operations management system and the key technologies are highlighted which will be required if this capability is brought to fruition. Without this automation and decision aiding capability, the growing complexity of avionics will result in an unmanageable workload for the operator, ultimately threatening mission success or survivability of the aircraft or space system. The key technologies include expert system application to operational tasks such as replanning, equipment diagnostics and checkout, global system management, and advanced man machine interfaces. The economical development of operations management systems, which are largely software, will require advancements in other technological areas such as software engineering and computer hardware.

Comparison of drive systems for pulsed synchronous machines - an overview

International Nuclear Information System (INIS)

Baumgart, G.E.; Boenig, H.J.

1986-01-01

Magnetically confined plasma fusion experiments require large pulses of energy to be delivered into coil systems. One of the most effective methods of generating these high energy pulses is to convert stored inertial energy into electrical energy. Large synchronous generators of both the vertical and horizontal shaft type have been successfully used for this purpose. As the pulsed energy is delivered to the load, the inertial energy of the rotor of the machine is changed into electrical energy, causing the rotor to slow down. A drive system is required to accelerate the generator from standstill to the maximum operating speed and between load pulses from a reduced operating speed to the maximum speed. There are several types of drive systems that can be used for this application. An overview of six candidate drive systems is presented and comparisons of cost, performance, efficiency and line effects for these systems are described

Comparison of drive systems for pulsed synchronous machines: an overview

International Nuclear Information System (INIS)

Baumgart, G.E.; Boenig, H.J.

1985-01-01

Magnetically confined plasma fusion experiments require large pulses of energy to be delivered into coil systems. One of the most effective methods of generating these high energy pulses is to convert stored inertial energy into electrical energy. Large synchronous generators of both the vertical and horizontal shaft type have been successfully used for this purpose. As the pulsed energy is delivered to the load, the inertial energy of the rotor of the machine is changed into electrical energy, causing the rotor to slow down. A drive system is required to accelerate the generator from standstill to the maximum operating speed and between load pulses from a reduced operating speed to the maximum speed. There are several types of drive systems that can be used for this application. An overview of six candidate drive systems is presented and comparisons of cost, performance, efficiency, and line effects for these systems are described

Sustainable Soil Management

DEFF Research Database (Denmark)

Green, Ole; Evgrafova, Alevtina; Kirkegaard Nielsen, Søren

Linket til højre henviser til rapporten i trykt format til download. This report provides an overview on new technologies for integrate sustainable and resilient management practices in arable ecosystems for advanced farmers, consultants, NGOs and policy makers. By following sustainable soil...... and soil quality in short- and long-terms. This report also illustrates the importance to combine a system approach for plant production by assessing field readiness, managing in-field traffic management, implementing the sitespecific controlled as well as sensor-controlled seedbed preparation, seeding...

Systems Engineering Management Plan

International Nuclear Information System (INIS)

1994-01-01

The purpose of this Monitored Retrievable Storage (MRS) Project Systems Engineering Management Plan (SEMP) is to define and establish the MRS Project Systems Engineering process that implements the approved policy and requirements of the Office of Civilian Radioactive Waste Management (OCRWM) for the US Department of Energy (DOE). This plan is Volume 5 of the MRS Project Management Plan (PMP). This plan provides the framework for implementation of systems engineering on the MRS Project consistent with DOE Order 4700.1, the OCRWM Program Management System Manual (PMSM), and the OCRWM Systems Engineering Management Plan (SEMP)

Climate change and mountain water resources: overview and recommendations for research, management and policy

Directory of Open Access Journals (Sweden)

D. Viviroli

2011-02-01

Full Text Available Mountains are essential sources of freshwater for our world, but their role in global water resources could well be significantly altered by climate change. How well do we understand these potential changes today, and what are implications for water resources management, climate change adaptation, and evolving water policy? To answer above questions, we have examined 11 case study regions with the goal of providing a global overview, identifying research gaps and formulating recommendations for research, management and policy.

After setting the scene regarding water stress, water management capacity and scientific capacity in our case study regions, we examine the state of knowledge in water resources from a highland-lowland viewpoint, focusing on mountain areas on the one hand and the adjacent lowland areas on the other hand. Based on this review, research priorities are identified, including precipitation, snow water equivalent, soil parameters, evapotranspiration and sublimation, groundwater as well as enhanced warming and feedback mechanisms. In addition, the importance of environmental monitoring at high altitudes is highlighted. We then make recommendations how advancements in the management of mountain water resources under climate change could be achieved in the fields of research, water resources management and policy as well as through better interaction between these fields.

We conclude that effective management of mountain water resources urgently requires more detailed regional studies and more reliable scenario projections, and that research on mountain water resources must become more integrative by linking relevant disciplines. In addition, the knowledge exchange between managers and researchers must be improved and oriented towards long-term continuous interaction.

Overview of ATLAS PanDA Workload Management

Science.gov (United States)

Maeno, T.; De, K.; Wenaus, T.; Nilsson, P.; Stewart, G. A.; Walker, R.; Stradling, A.; Caballero, J.; Potekhin, M.; Smith, D.; ATLAS Collaboration

2011-12-01

The Production and Distributed Analysis System (PanDA) plays a key role in the ATLAS distributed computing infrastructure. All ATLAS Monte-Carlo simulation and data reprocessing jobs pass through the PanDA system. We will describe how PanDA manages job execution on the grid using dynamic resource estimation and data replication together with intelligent brokerage in order to meet the scaling and automation requirements of ATLAS distributed computing. PanDA is also the primary ATLAS system for processing user and group analysis jobs, bringing further requirements for quick, flexible adaptation to the rapidly evolving analysis use cases of the early datataking phase, in addition to the high reliability, robustness and usability needed to provide efficient and transparent utilization of the grid for analysis users. We will describe how PanDA meets ATLAS requirements, the evolution of the system in light of operational experience, how the system has performed during the first LHC data-taking phase and plans for the future.

Overview of ATLAS PanDA Workload Management

International Nuclear Information System (INIS)

Maeno, T.; De, K.; Wenaus, T.; Nilsson, P.; Stewart, G.A.; Walker, R.; Stradling, A.; Caballero, J.; Potekhin, M.; Smith, D.

2011-01-01

The Production and Distributed Analysis System (PanDA) plays a key role in the ATLAS distributed computing infrastructure. All ATLAS Monte-Carlo simulation and data reprocessing jobs pass through the PanDA system. We will describe how PanDA manages job execution on the grid using dynamic resource estimation and data replication together with intelligent brokerage in order to meet the scaling and automation requirements of ATLAS distributed computing. PanDA is also the primary ATLAS system for processing user and group analysis jobs, bringing further requirements for quick, flexible adaptation to the rapidly evolving analysis use cases of the early datataking phase, in addition to the high reliability, robustness and usability needed to provide efficient and transparent utilization of the grid for analysis users. We will describe how PanDA meets ATLAS requirements, the evolution of the system in light of operational experience, how the system has performed during the first LHC data-taking phase and plans for the future.

Behavior Management in Physical Education, Recreation, and Sport: A Bibliography.

Science.gov (United States)

Lavay, Barry

1986-01-01

This bibliography contains references specifically pertaining to physical education, recreation, or sport and to behavior management. The references are classified into areas of behavior management overview, reinforcement systems, motor performance, physical fitness, recreation, and sport. (MT)

Using Total Quality Management Principles To Implement School-Based Management.

Science.gov (United States)

Terry, Paul M.

Those engaged in school restructuring can find direction in the philosophy of W. Edwards Deming, which has guided the operations of many American corporations. This paper provides an overview of Deming's Fourteen Points of Total Quality Management (TQM) and discusses their applications to education. To develop a successful TQM system, the school…

Development of a Cost Effective Power Generation System: An Overview

Directory of Open Access Journals (Sweden)

Shiv Prakash Bihari

2016-03-01

Full Text Available This paper presents an overview on development of cost effective power generation system and motivates for development of a model for hybrid system with wind to investigate the combined operation of wind with different sources to cater to wind’s stochastic nature for imbalance minimization and optimal operation. Development of model for trading power in competitive electricity market and development of strategies for trading in electricity markets (wind energy and reserves markets to investigate the effects of real time pricing tariffs on electricity market operation has been illustrated in this paper. Dynamic modelling related studies to investigate the wind generator’s kinetic energy for primary frequency support using simulink and simulation studies on doubly fed induction generator to study its capability during small disturbances / fluctuations on power system have been described.

Overview and status of the prototype project for Wendelstein 7-X control system

Energy Technology Data Exchange (ETDEWEB)

Schacht, Joerg [Max-Planck-Institut fuer Plasmaphysik, EURATOM Association, Teilinstitut Greifswald, Wendelsteinstrasse 1, D-17491 Greifswald (Germany)], E-mail: joerg.schacht@ipp.mpg.de; Bluhm, Torsten; Herbst, Uwe; Hennig, Christine; Heinrich, Stefan; Kuehner, Georg; Koester, Erik; Laqua, Heike; Lewerentz, Marc; Marquardt, Mirco; Meyer, Christiane; Mueller, Ina; Pingel, Steffen; Sachtleben, Juergen; Spring, Anett; Werner, Andreas; Woelk, Andreas [Max-Planck-Institut fuer Plasmaphysik, EURATOM Association, Teilinstitut Greifswald, Wendelsteinstrasse 1, D-17491 Greifswald (Germany)

2009-06-15

This contribution gives an overview of the project 'Prototype W7-X control system'. The objective of this prototype project is to demonstrate the applicability of the segment orientated control system at a running fusion experiment including steady-state operation, interaction of all relevant components, real time control, data acquisition and on-line data analysis. Furthermore, the W7-X safety concept will be implemented at WEGA and tested.

A context management system for a cost-efficient smart home platform

Science.gov (United States)

Schneider, J.; Klein, A.; Mannweiler, C.; Schotten, H. D.

2012-09-01

This paper presents an overview of state-of-the-art architectures for integrating wireless sensor and actuators networks into the Future Internet. Furthermore, we will address advantages and disadvantages of the different architectures. With respect to these criteria, we develop a new architecture overcoming these weaknesses. Our system, called Smart Home Context Management System, will be used for intelligent home utilities, appliances, and electronics and includes physical, logical as well as network context sources within one concept. It considers important aspects and requirements of modern context management systems for smart X applications: plug and play as well as plug and trust capabilities, scalability, extensibility, security, and adaptability. As such, it is able to control roller blinds, heating systems as well as learn, for example, the user's taste w.r.t. to home entertainment (music, videos, etc.). Moreover, Smart Grid applications and Ambient Assisted Living (AAL) functions are applicable. With respect to AAL, we included an Emergency Handling function. It assures that emergency calls (police, ambulance or fire department) are processed appropriately. Our concept is based on a centralized Context Broker architecture, enhanced by a distributed Context Broker system. The goal of this concept is to develop a simple, low-priced, multi-functional, and save architecture affordable for everybody. Individual components of the architecture are well tested. Implementation and testing of the architecture as a whole is in progress.

Overview of Green Building Material (GBM Policies and Guidelines with Relevance to Indoor Air Quality Management in Taiwan

Directory of Open Access Journals (Sweden)

Wen-Tien Tsai

2017-12-01

Full Text Available The objective of this paper was to offer a preliminary overview of Taiwan’s success in green building material (GBM efforts through legal systems and promotion measures, which are relevant to the contribution to indoor air quality (IAQ due to sustainability and health issues. In the first part of the paper, the IAQ regulations are summarized to highlight the second nation (i.e., Taiwan around the world in IAQ management by the law. In addition, the permissible exposure limits (PEL in Taiwan for airborne hazardous substances were first promulgated in 1974 to deal with occupational health issues in the workplace environment. In the second part of the paper, the developing status of the GBM in Taiwan is analyzed to unravel its connection with the Indoor Air Quality Management Act (IAQMA, promulgated on 23 November 2011. By the end of September 2017, a total of 645 GBM labels have been conferred, covering over 5000 green products. Due to the effectiveness of source control, the healthy GBM occupies most of the market, accounting for about 75%. The IAQMA, which took force in November 2012, is expected to significantly increase the use of healthy GBM in new building construction and remodeling, especially in low formaldehyde (HCHO/volatile organic compound (VOC-emitting products.

Overview of remote handling technologies developed for inspection and maintenance of spent fuel management facilities in France

Energy Technology Data Exchange (ETDEWEB)

Desbats, Philippe [CEA - Direction de la Recherche Technologique / LIST, BP 6 - 92265, Fontenay-aux-Roses cedex (France); Piolain, Gerard [COGEMA-HAG/DMCO, AREVA NC SA, 2, rue Paul Dautier, BP 4, 78 141 Velizy Cedex (France)

2006-07-01

In the facilities of the end of the nuclear fuel cycle, like spent fuel storage pools, reprocessing plants, Plutonium-based fuel manufacturing plants or waste temporary storage units, materials handling must be carried out remotely, taking into account the nuclear radiating environment. In addition to the automation requirement, robotics equipment in the nuclear industry must be substituted to human operators in order to respect the ALARA principle. More over, remote handling technologies aim to improve the working conditions, as well as the quality of the work achieved by the operators. Ten years ago, COGEMA (AREVA Group) and CEA (French Atomic Energy Agency) started an ambitious R and D program in robotics and remote handling technologies applied to COGEMA spent fuel management facilities in France, with the aim to cover the requirements of the different plant life cycle steps. The paper gives an overview of the important developments that have been carried out by CEA and then transferred to the COGEMA industrial group. The range includes the next generation of servo-manipulators, long range inspection tools and carriers, nuclear versions of industrial robots, radiation hardened electronic systems, interactive environment modeling tools, as well as force-feedback master-slave generic control software for tele-operation systems. Some applications of this development are presented in the paper: - rad-hard electronic modules for robotic equipment which are used by COGEMA in high radiating environment; - long reach articulated carrier for inspection of spent full management blind cells; - new electrical force feedback master/slave system to improve the tele-operation of standard tele-manipulators; - generic control software for tele-manipulators. The results of the robotic program carried out by COGEMA and CEA have been very valuable for the introduction of new technologies inside nuclear industry. Innovative products and sub-systems can be integrated now in a large

Equipment performance monitoring in NPP Krsko (Summarized system health report)

International Nuclear Information System (INIS)

Djetelic, N.; Cicvaric, D.

2004-01-01

Management common goal is safe, reliable, effective, acceptable to public and conservative/cautious operation of NPP Krsko. A set of programs, including Corrective Action Program, Performance Indicators, Operating Experience, Self Assessment and System Health Report, is developed to assist NPP Krsko management in fulfilling those goals. System Health Report is a tool that management can use to quickly assess how selected systems are performing, to determine where additional management attention is required and to determine if appropriate corrective actions have been established. Summarized System Health Report is developed for management's quick overview of systems status, important system malfunctions and problems as well as major changes from previous assessment period. Summarized Report contains nine sections: status difference including brief explanation, selected performance indicators, new equipment problems, functional failures, important problem analyses, action plan for systems with Potential Danger (RED) status, maintenance rule status overview and systems availability (planned and unplanned).(author)

Chronic Diseases Overview

Science.gov (United States)

... Plan Templates All Chronic Surveillance Systems Communications Center Social Media Press Room Press Release Archives Multimedia Communication Campaigns Publications Chronic Disease Overview 2016–2017 At A ...

Integrating the radioactive waste management system into other management systems

International Nuclear Information System (INIS)

Silva, Ana Cristina Lourenco da; Nunes Neto, Carlos Antonio

2007-01-01

Radioactive waste management is to be included in the Integrated Management System (IMS) which pursues the continuous improvement of the company's quality, occupational safety and health, and environment protection processes. Radioactive waste management is based on the following aspects: optimization of human and material resources for execution of tasks, including the provision of a radiation protection supervisor to watch over the management of radioactive waste; improved documentation (management plan and procedures); optimization of operational levels for waste classification and release; maintenance of generation records and history through a database that facilitates traceability of information; implementation of radioactive waste segregation at source (source identification, monitoring and decontamination) activities intended to reduce the amount of radioactive waste; licensing of initial storage site for radioactive waste control and storage; employee awareness training on radioactive waste generation; identification and evaluation of emergency situations and response planning; implementation of preventive maintenance program for safety related items; development and application of new, advanced treatment methodologies or systems. These aspects are inherent in the concepts underlying quality management (establishment of administrative controls and performance indicators), environment protection (establishment of operational levels and controls for release), occupational health and safety (establishment of operational controls for exposure in emergency and routine situations and compliance with strict legal requirements and standards). It is noted that optimizing the addressed aspects of a radioactive waste management system further enhances the efficiency of the Integrated Management System for Quality, Environment, and Occupational Safety and Health. (author)

Natural computing for mechanical systems research: A tutorial overview

Science.gov (United States)

Worden, Keith; Staszewski, Wieslaw J.; Hensman, James J.

2011-01-01

A great many computational algorithms developed over the past half-century have been motivated or suggested by biological systems or processes, the most well-known being the artificial neural networks. These algorithms are commonly grouped together under the terms soft or natural computing. A property shared by most natural computing algorithms is that they allow exploration of, or learning from, data. This property has proved extremely valuable in the solution of many diverse problems in science and engineering. The current paper is intended as a tutorial overview of the basic theory of some of the most common methods of natural computing as they are applied in the context of mechanical systems research. The application of some of the main algorithms is illustrated using case studies. The paper also attempts to give some indication as to which of the algorithms emerging now from the machine learning community are likely to be important for mechanical systems research in the future.

An analysis on the management system of radioactive waste in China

International Nuclear Information System (INIS)

Qu Zhimin; Chen Haicheng; Teng, Lijun

2000-01-01

The paper presents an overview on the management of radioactive wastes in China. Addressed are: radioactive waste classification, sources of radioactive waste, principles, legal framework, institutional control and financing. Suggestions are made for further progress in this field. (author)

Nevada Nuclear Waste Storage Investigations Quality-Assurance Program Plan: management and overview

International Nuclear Information System (INIS)

1981-10-01

This Quality Assurance Program Plan (QAPP) defines the quality assurance program in effect for those activities of the Nevada Nuclear Waste Storage (NNWSI) that are directly controlled by: DOE/NV, the Technical Overview Contractor, and the Quality Assurance Overview Contractor. It is intended as a supplement to the NNWSI-QAP

Learning Content Management Systems

Directory of Open Access Journals (Sweden)

Tache JURUBESCU

2008-01-01

Full Text Available The paper explains the evolution of e-Learning and related concepts and tools and its connection with other concepts such as Knowledge Management, Human Resources Management, Enterprise Resource Planning, and Information Technology. The paper also distinguished Learning Content Management Systems from Learning Management Systems and Content Management Systems used for general web-based content. The newest Learning Content Management System, very expensive and yet very little implemented is one of the best tools that helps us to cope with the realities of the 21st Century in what learning concerns. The debates over how beneficial one or another system is for an organization, can be driven by costs involved, efficiency envisaged, and availability of the product on the market.

CPM and PERT in Library Management.

Science.gov (United States)

Main, Linda

1989-01-01

Discusses two techniques of systems analysis--Critical Path Method (CPM) and Program Evaluation Review Techniques (PERT)--and their place in library management. An overview of CPM and PERT charting procedures is provided. (11 references) (Author/MES)

Lighting system with thermal management system

Science.gov (United States)

Arik, Mehmet; Weaver, Stanton; Stecher, Thomas; Seeley, Charles; Kuenzler, Glenn; Wolfe, Jr., Charles; Utturkar, Yogen; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

2013-05-07

Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

Managing hybrid marketing systems.

Science.gov (United States)

Moriarty, R T; Moran, U

1990-01-01

As competition increases and costs become critical, companies that once went to market only one way are adding new channels and using new methods - creating hybrid marketing systems. These hybrid marketing systems hold the promise of greater coverage and reduced costs. But they are also hard to manage; they inevitably raise questions of conflict and control: conflict because marketing units compete for customers; control because new indirect channels are less subject to management authority. Hard as they are to manage, however, hybrid marketing systems promise to become the dominant design, replacing the "purebred" channel strategy in all kinds of businesses. The trick to managing the hybrid is to analyze tasks and channels within and across a marketing system. A map - the hybrid grid - can help managers make sense of their hybrid system. What the chart reveals is that channels are not the basic building blocks of a marketing system; marketing tasks are. The hybrid grid forces managers to consider various combinations of channels and tasks that will optimize both cost and coverage. Managing conflict is also an important element of a successful hybrid system. Managers should first acknowledge the inevitability of conflict. Then they should move to bound it by creating guidelines that spell out which customers to serve through which methods. Finally, a marketing and sales productivity (MSP) system, consisting of a central marketing database, can act as the central nervous system of a hybrid marketing system, helping managers create customized channels and service for specific customer segments.

Weed management practices in natural ecosystems: a critical overview

Directory of Open Access Journals (Sweden)

C.F. Reinhardt

2000-07-01

Full Text Available Increasing public pressure against the use of pesticides and other agricultural inputs has placed increased emphasis on the development of ecologically based pest management. One distinct reaction of the Weed Science discipline has been the swing away from herbicide research to increased research on the basic biology and ecology of weeds in hopes of reduced reliance on "technological crutches" such as herbicides and other practices that are potentially harmful to the environment. Biological control is the long-standing alternative to the use of herbicides and interest in the former practice has been boosted by the realization that the use of herbicides may lead to the development of herbicide resistance in weed populations, and that herbicide residues occur in surface and groundwater. Supporters of herbicide use would point out that biological control is generally not effective in crop production systems, and is basically slow-acting. Debates between protagonists for the exclusive use of one or the other weed management practice tend to obscure the benefits that integration of different techniques are likely to have. For natural ecosystems it is proposed that integration of the more subtle practice of biological control with the use of herbicides, which relatively quickly overwhelm a biological system with mortality, is likely to be the most effective weed management tool. Different weed management practices that could be considered in natural ecosystems are discussed in terms of three key performance rating criteria, viz. activity, selec- tivity and persistence In this concise review, general discussion is focussed on the fundamentals of weed management practices, with the view to promote concept-based approaches that are critical for the development of effective weed management strate- gies.

Lymphocyte-based model systems for allergy research: a historic overview.

Science.gov (United States)

Neunkirchner, Alina; Schmetterer, Klaus G; Pickl, Winfried F

2014-01-01

During the last decades, a multitude of studies applying distinct in vitro and in vivo model systems have contributed greatly to our better understanding of the initiation and regulation of inflammatory processes leading to allergic diseases. Over the years, it has become evident that among lymphocytes, not only IgE-producing B cells and allergy-orchestrating CD4(+) helper cells but also cytotoxic CD8(+) T cells, γδ-T cells and innate lymphoid cells, as well as regulatory lymphocytes, might critically shape the immune response towards usually innocuous allergens. In this review, we provide a historic overview of pioneering work leading to the establishment of important lymphocyte-based model systems for allergy research. Moreover, we contrast the original findings with our currently more refined knowledge to appreciate the actual validity of the respective models and to reassess the conclusions obtained from them. Conflicting studies and interpretations are identified and discussed. The tables are intended to provide an easy overview of the field not only for scientists newly entering the field but also for the broader readership interested in updating their knowledge. Along those lines, herein we discuss in vitro and in vivo approaches to the investigation of lymphocyte effector cell activation, polarization and regulation, and describe depletion and adoptive transfer models along with gene knockout and transgenic (tg) methodologies. In addition, novel attempts to establish humanized T cell antigen receptor tg mouse models for allergy research are described and discussed. © 2014 S. Karger AG, Basel.

Sistemi upravljanja sadržajem - pojam i karakteristike / Content management systems: Concept and features

Directory of Open Access Journals (Sweden)

Dejan S. Milenković

2010-01-01

Full Text Available Rad predstavlja kratak prikaz osnova programskog rešenja koje je u poslednjih desetak godina okupiralo sve veće i ozbiljne poslovne organizacije koje svoje poslovanje, celokupno ili delimično, zasnivaju na principima Internet tehnologija i elektronskog poslovanja. Sistemi upravljanja sadržajima nametnuli su se kao potreba da se izvrši potpuna automatizacija poslovanja jedne organizacije. U perspektivi, upravljanje dokumentima komandno-informacionih sistemima Vojske Srbije biće zasnovano na sistemima upravljanja sadržajima. / Introduction The paper explains the importance and the role of content management systems, gives an overview of the functionality required by such systems and makes a categorization of existing content management systems, thus performing, to some extent, a systematization of this area. Internet technologies and e-business Electronic business is a set of business activities that occur by ICT, especially Internet. CMS existence is conditioned by the development of Internet technology. Basic terminology, problem and solution The basic terms of which problems are considered in this paper are Content, Content Management and Content Management System. Content management systems demand Content management systems demand is reflected in the following: (1 complex structure and a hierarchy of target groups are major challenges for the selection and implementation of an adequate system of content management in decision-making processes; (2 timely adoption of key decisions and their implementation is currently a considerable advantage over competitors; (3 by applying modern information and communication technologies and service-oriented architecture, content, especially documents, management provides security and protection of information in the process of content managing. Content management systems types This article describes the following types of content management systems: Document Management System, Digital Asset Management

Information Security Management - Part Of The Integrated Management System

Science.gov (United States)

Manea, Constantin Adrian

2015-07-01

The international management standards allow their integrated approach, thereby combining aspects of particular importance to the activity of any organization, from the quality management systems or the environmental management of the information security systems or the business continuity management systems. Although there is no national or international regulation, nor a defined standard for the Integrated Management System, the need to implement an integrated system occurs within the organization, which feels the opportunity to integrate the management components into a cohesive system, in agreement with the purpose and mission publicly stated. The issues relating to information security in the organization, from the perspective of the management system, raise serious questions to any organization in the current context of electronic information, reason for which we consider not only appropriate but necessary to promote and implement an Integrated Management System Quality - Environment - Health and Operational Security - Information Security

AVLIS documentation overview and tables of contents

International Nuclear Information System (INIS)

1984-01-01

Three documents constitute the executive summary series in Data Package III: this document (Documentation Overview and Tables of Contents (E001)) plus the AVLIS Production Plant Executive Summary (E010) and the AVLIS Production Plant Overall Design Report (E020). They provide progressively greater detail on the key information and conclusions contained within the data package. The Executive Summary and Overall Design Report present summaries of each Data Package III document. They are intended to provide a global overview of AVLIS Production Plant deployment including program planning, project management, schedules, engineering design, production, operations, capital cost, and operating cost. The purpose of Overview and Tables of Contents is threefold: to briefly review AVLIS goals for Data Package III documentation, to present an overview of the contents of the data package, and to provide a useful guide to information contained in the numerous documents comprising the package

Integrated management systems

CERN Document Server

Bugdol, Marek

2015-01-01

Examining the challenges of integrated management, this book explores the importance and potential benefits of using an integrated approach as a cross-functional concept of management. It covers not only standardized management systems (e.g. International Organization for Standardization), but also models of self-assessment, as well as different types of integration. Furthermore, it demonstrates how processes and systems can be integrated, and how management efficiency can be increased. The major part of this book focuses on management concepts which use integration as a key tool of management processes (e.g. the systematic approach, supply chain management, virtual and network organizations, processes management and total quality management). Case studies, illustrations, and tables are also provided to exemplify and illuminate the content, as well as examples of successful and failed integrations. Providing a particularly useful resource to managers and specialists involved in the improvement of organization...

New type radiation management system

International Nuclear Information System (INIS)

Mogi, Kenichi; Uranaka, Yasuo; Fujita, Kazuhiko

2001-01-01

The radiation management system is a system to carry out entrance and leaving room management of peoples into radiation management area, information management on radiation obtained from a radiation testing apparatus, and so on. New type radiation management system developed by the Mitsubishi Electric Corp. is designed by concepts of superior maintenance and system practice by using apparatus and its interface with standard specification, upgrading of processing response by separating exposure management processing from radiation monitoring processing on a computer, and a backup system not so as to lose its function by a single accident of the constructed computer. Therefore, the system is applied by the newest hardware, package software, and general use LAN, and can carry out a total system filled with requirements and functions for various radiation management of customers by preparing a basic system from radiation testing apparatus to entrance and leaving room management system. Here were described on outline of the new type management system, concept of the system, and functions of every testing apparatus. (G.K.)

A conceptual design for an integrated data base management system for remote sensing data. [user requirements and data processing

Science.gov (United States)

Maresca, P. A.; Lefler, R. M.

1978-01-01

The requirements of potential users were considered in the design of an integrated data base management system, developed to be independent of any specific computer or operating system, and to be used to support investigations in weather and climate. Ultimately, the system would expand to include data from the agriculture, hydrology, and related Earth resources disciplines. An overview of the system and its capabilities is presented. Aspects discussed cover the proposed interactive command language; the application program command language; storage and tabular data maintained by the regional data base management system; the handling of data files and the use of system standard formats; various control structures required to support the internal architecture of the system; and the actual system architecture with the various modules needed to implement the system. The concepts on which the relational data model is based; data integrity, consistency, and quality; and provisions for supporting concurrent access to data within the system are covered in the appendices.

An overview of CFD and PIV application in investigation of solar thermal systems

DEFF Research Database (Denmark)

Ai, Ning; Fan, Jianhua; Ji, Jianbing

2007-01-01

. The most promising solution to this challenge is the use of computational fluid dynamics (CFD) in combination with particle image velocimetry (PIV)，which will be the future trend in the investigation of solar thermal systems. The aim of this work is to give an overview of the status of the CFD...

THE PLACE OF OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM IN THE INTEGRATED MANAGEMENT SYSTEM

Directory of Open Access Journals (Sweden)

Piotr Kafel

2016-06-01

Full Text Available The purpose of this paper is to analyze the place of occupational health and safety management system (OHSMS within the integrated management system. Implementation aspects of management systems are discussed, namely the different management system standards used for registration, for example ISO 14001, ISO 9001, OHSAS 18001, ISO 27001, the order in which they were implemented, the time required for each implementation, as well as the scope of integration of these management system standards into a single Integrated Management System and the level of integration. In order to do so, some of the results of a survey carried out in 81 organizations registered to at least two management systems selected from popular international standards, e.g.: ISO 9001, ISO 14001, OHSAS 18001, ISO/IEC 27001, ISO 22000 were used. OHSMS is not the system that is implemented as a first one. Usually it is implemented after or simultaneously with ISO 9001 and ISO 14001 standards. Time of implementation of MSSs in second and further round of implementation is shorter than during the implementation of first standards. There is a higher level of integration of implemented management standards in organizations where one of the standards in OHSMS, than in a companies without OHSMS. The paper analyses those sequences of management systems implementation of safety management systems with other system, that allow organizations to achieve higher levels of integration and presents a possible pattern for the companies initiating the integration process.

Pain management for women in labour: an overview of systematic reviews.

Science.gov (United States)

Jones, Leanne; Othman, Mohammad; Dowswell, Therese; Alfirevic, Zarko; Gates, Simon; Newburn, Mary; Jordan, Susan; Lavender, Tina; Neilson, James P

2012-03-14

The pain that women experience during labour is affected by multiple physiological and psychosocial factors and its intensity can vary greatly.  Most women in labour require pain relief. Pain management strategies include non-pharmacological interventions (that aim to help women cope with pain in labour) and pharmacological interventions (that aim to relieve the pain of labour). To summarise the evidence from Cochrane systematic reviews on the efficacy and safety of non-pharmacological and pharmacological interventions to manage pain in labour. We considered findings from non-Cochrane systematic reviews if there was no relevant Cochrane review. We searched the Cochrane Database of Systematic Reviews (The Cochrane Library 2011, Issue 5), The Cochrane Database of Abstracts of Reviews of Effects (The Cochrane Library 2011, Issue 2 of 4), MEDLINE (1966 to 31 May 2011) and EMBASE (1974 to 31 May 2011) to identify all relevant systematic reviews of randomised controlled trials of pain management in labour. Each of the contributing Cochrane reviews (nine new, six updated) followed a generic protocol with 13 common primary efficacy and safety outcomes. Each Cochrane review included comparisons with placebo, standard care or with a different intervention according to a predefined hierarchy of interventions. Two review authors extracted data and assessed methodological quality, and data were checked by a third author. This overview is a narrative summary of the results obtained from individual reviews. We identified 15 Cochrane reviews (255 included trials) and three non-Cochrane reviews (55 included trials) for inclusion within this overview. For all interventions, with available data, results are presented as comparisons of: 1. Intervention versus placebo or standard care; 2. Different forms of the same intervention (e.g. one opioid versus another opioid); 3. One type of intervention versus a different type of intervention (e.g. TENS versus opioid). Not all reviews

A meta-analysis of human-system interfaces in unmanned aerial vehicle (UAV) swarm management.

Science.gov (United States)

Hocraffer, Amy; Nam, Chang S

2017-01-01

A meta-analysis was conducted to systematically evaluate the current state of research on human-system interfaces for users controlling semi-autonomous swarms composed of groups of drones or unmanned aerial vehicles (UAVs). UAV swarms pose several human factors challenges, such as high cognitive demands, non-intuitive behavior, and serious consequences for errors. This article presents findings from a meta-analysis of 27 UAV swarm management papers focused on the human-system interface and human factors concerns, providing an overview of the advantages, challenges, and limitations of current UAV management interfaces, as well as information on how these interfaces are currently evaluated. In general allowing user and mission-specific customization to user interfaces and raising the swarm's level of autonomy to reduce operator cognitive workload are beneficial and improve situation awareness (SA). It is clear more research is needed in this rapidly evolving field. Copyright © 2016 Elsevier Ltd. All rights reserved.

A systems engineering management approach to resource management applications

Science.gov (United States)

Hornstein, Rhoda Shaller

1989-01-01

The author presents a program management response to the following question: How can the traditional practice of systems engineering management, including requirements specification, be adapted, enhanced, or modified to build future planning and scheduling systems for effective operations? The systems engineering management process, as traditionally practiced, is examined. Extensible resource management systems are discussed. It is concluded that extensible systems are a partial solution to problems presented by requirements that are incomplete, partially immeasurable, and often dynamic. There are positive indications that resource management systems have been characterized and modeled sufficiently to allow their implementation as extensible systems.

The NASA Aviation Safety Program: Overview

Science.gov (United States)

Shin, Jaiwon

2000-01-01

In 1997, the United States set a national goal to reduce the fatal accident rate for aviation by 80% within ten years based on the recommendations by the Presidential Commission on Aviation Safety and Security. Achieving this goal will require the combined efforts of government, industry, and academia in the areas of technology research and development, implementation, and operations. To respond to the national goal, the National Aeronautics and Space Administration (NASA) has developed a program that will focus resources over a five year period on performing research and developing technologies that will enable improvements in many areas of aviation safety. The NASA Aviation Safety Program (AvSP) is organized into six research areas: Aviation System Modeling and Monitoring, System Wide Accident Prevention, Single Aircraft Accident Prevention, Weather Accident Prevention, Accident Mitigation, and Synthetic Vision. Specific project areas include Turbulence Detection and Mitigation, Aviation Weather Information, Weather Information Communications, Propulsion Systems Health Management, Control Upset Management, Human Error Modeling, Maintenance Human Factors, Fire Prevention, and Synthetic Vision Systems for Commercial, Business, and General Aviation aircraft. Research will be performed at all four NASA aeronautics centers and will be closely coordinated with Federal Aviation Administration (FAA) and other government agencies, industry, academia, as well as the aviation user community. This paper provides an overview of the NASA Aviation Safety Program goals, structure, and integration with the rest of the aviation community.

Chemical safety management in WIP, Kalpakkam - an overview

International Nuclear Information System (INIS)

Das, Biplab; Ravi, K.V.

2016-01-01

Nuclear Waste Management necessitates several chemicals for its process. Many of them are substantially hazardous to health, if exposed. Our department takes utmost care in transport, storing and handling of chemicals. We must put maximum efforts to prevent spillage or leak of chemicals and prevent any exposure to employees, but once it occurs, safety of the employees depend on our quick and appropriate response. Therefore, periodical review of the chemical risk needs to be done to ensure that the steps taken by the plant are in place. Purpose of this paper is to assess the overall chemical management system of this plant to ensure the prevention of any untoward incident arising from chemicals. (author)

Solutions for decision support in university management

Directory of Open Access Journals (Sweden)

Andrei STANCIU

2009-06-01

Full Text Available The paper proposes an overview of decision support systems in order to define the role of a system to assist decision in university management. The authors present new technologies and the basic concepts of multidimensional data analysis using models of business processes within the universities. Based on information provided by scientific literature and on the authors’ experience, the study aims to define selection criteria in choosing a development environment for designing a support system dedicated to university management. The contributions consist in designing a data warehouse model and models of OLAP analysis to assist decision in university management.

The IAEA perspective on international and national radioactive waste management information systems

International Nuclear Information System (INIS)

Csullog, G.W.; Falck, W.E.; Miaw, S.T.W.

2001-01-01

individual countries. International radioactive waste management information systems are needed to provide overviews of the status of and trends in: establishing national systems for radioactive waste management, the operational state of radioactive waste management facilities (processing, storage and disposal), and annual radioactive waste arisings and the accumulated inventories of waste in storage and disposal facilities. Various international organizations use and assess information about radioactive waste management, such as the IAEA, the OECD/NEA and the European Union. At a recent international meeting on 'Information for Decision Making', experts noted that the 'lack of full and effective co-operation between departments and institutions both at the national and international levels responsible for data collection.. ..often leads to inefficient information management due to duplication of surveys, inconsistent methodologies and inefficient use of information'. Clearly, international organizations need to co-ordinate their activities in the collection and dissemination of nationally-based information about radioactive waste management. Historically, IAEA Member States have developed and implemented a variety of waste classification schemes in support of their national radioactive waste management programmes. For those Member States that have implemented waste inventory record keeping systems, their databases are used to record waste inventories according to national classification schemes. In addition, the scope and quality of information in these databases not only varies from Member State to Member State, it can also vary from organization to organization within a Member State. Differences in waste management record keeping at the national level complicates reporting at the international level, where the information is to be reported in a consistent format that facilitates comparisons between Member State submissions. The IAEA has undertaken a number of initiatives

Transmission dispatch and congestion management in open market systems

Science.gov (United States)

Fang, Risheng

This thesis is located in the domain of electricity supply industry restructuring. It deals with emerging issues, whose understanding is essential to advancing knowledge of open access transmission theory and proceeds to develop approaches for solving the transmission dispatch and congestion management problem. An overview of current trends and experiences in utility restructuring and the main models for restructuring, as well as the classifications of system operators, is first presented. A fully unbundled competitive electricity market model, called the bilateral/multilateral trades model, is then developed. A survey of current research in transmission dispatch and congestion management is included with discussion of transmission capacity and ancillary services. A methodology for the power dispatch problem in a structure dominated by bilateral and multilateral transmission contracts is presented. Group structures are mathematically formulated and explored and three basic types of curtailment strategies proposed for use by market participants. A more complex model is then developed, which takes into account the co-existence of bilateral and multilateral contracts with pool type dynamic supplies and demands based on bids and market clearing prices. An integrated dispatch strategy to reconcile all three types of transactions (bilateral, multilateral and pool) is then developed. Prioritization of electricity transactions and related curtailment strategies are explored and a mechanism for coordination between market participants to achieve additional economic advantages is described. A theory of security based rescheduling is presented in order to investigate the security-related aspects of operation in an unbundled and deregulated system. The impact of post-contingency corrective capability on optimal rescheduling results has been identified and the advantage of incorporating post-contingency corrective rescheduling into the objective function demonstrated. Finally

Keynote address: Federal overview of municipal sludge management

International Nuclear Information System (INIS)

Hathaway, W.B.

1979-01-01

The proper disposal of sewage sludge is becoming an increasing problem on solid waste management systems throughout the country. Currently 18,000 municipal wastewater treatment plants are generating about 5 million tons of sludge a year. This is expected to double in the next 8 to 10 years. The environmental aspects of sludge disposal are discussed

Incorporating co-management within your environmental management system

International Nuclear Information System (INIS)

Melton, D.A.; Maher, S.

1998-01-01

The meaning of co-management in the renewable resource sector in terms of government and First Nations relations was explained. Co-management is a short term for co-operative management and has a formative history in the Northwest Territories, particularly in wildlife management. For example, co-management bridged the gap between the aboriginal way of hunting with those of the government. The aboriginal system was associated by self regulation based on traditional knowledge whereas the government system emphasized science, laws and regulations. At present, there are few examples of co-management in the oil and gas sector. This paper described the lessons that could be learned from previous examples of co-management and how those lessons might apply to an Environmental Management System (EMS) for the private oil and gas sector. 3 refs

The real-time on-line decision support system RODOS for off-site emergency management

International Nuclear Information System (INIS)

Benz, G.; Ehrhardt, J.; Faude, D.; Fischer, F.; Paesler-Sauer, J.; Rafat, M.; Schichtel, T.; Schuele, O.; Steinhauer, C.

1994-01-01

The project RODOS aims at the development of an integrated and comprehensive real-time on-line decision support system for off-site emergency management of nuclear accidents in Europe, applicable to the vicinity of the accident and its early phase up to far distant areas and later stages. As a joint venture of 18 institutions in the European Union, in close cooperation with institutions in Russia, Belarus, Ukraine and east-central Europe, the project is to provide the methodological basis, develop models, collect data, and install the hardware and software framework of the RODOS system. The paper describes the project status, the overall design of the system and its present software structure, and gives a brief overview of important research and development tasks for the next project phases. (orig.) [de

Corporate risk management : an overview

NARCIS (Netherlands)

Oosterhof, Casper M.

2001-01-01

Corporate risk management and hedging are important activities within financial as well as non-financial corporations. Under the assumptions of Modigliani and Miller [1958], corporate risk management is a redundant activity. However, the existence of market imperfections can explain the corporate

A global overview of risk management of the DOE complex

International Nuclear Information System (INIS)

Alesso, H.P.; Majumdar, K.C.

1993-01-01

No endeavor is risk-fire and as we realize the inherent risks in society, our only viable solution is to manage the risk. Application of an integrated risk management program of a large technological system like the DOE complex is a difficult, task; but it is the only rational means to optimize the risk-benefit equation. An effective risk management culture-within the DOE complex will in the long run, ensure a consistent response to mitigate identified risks. An effective risk management program provides responsible administrative planning and logical application of the best technical analyses. It requires the involvement of all personnel. Our objective in this paper is to point out broad perspectives that raise concerns about future DOE ask management issues and to suggest some possible remedies

Overview of the coagulation system.

Science.gov (United States)

Palta, Sanjeev; Saroa, Richa; Palta, Anshu

2014-09-01

Coagulation is a dynamic process and the understanding of the blood coagulation system has evolved over the recent years in anaesthetic practice. Although the traditional classification of the coagulation system into extrinsic and intrinsic pathway is still valid, the newer insights into coagulation provide more authentic description of the same. Normal coagulation pathway represents a balance between the pro coagulant pathway that is responsible for clot formation and the mechanisms that inhibit the same beyond the injury site. Imbalance of the coagulation system may occur in the perioperative period or during critical illness, which may be secondary to numerous factors leading to a tendency of either thrombosis or bleeding. A systematic search of literature on PubMed with MeSH terms 'coagulation system, haemostasis and anaesthesia revealed twenty eight related clinical trials and review articles in last 10 years. Since the balance of the coagulation system may tilt towards bleeding and thrombosis in many situations, it is mandatory for the clinicians to understand physiologic basis of haemostasis in order to diagnose and manage the abnormalities of the coagulation process and to interpret the diagnostic tests done for the same.

Overview of the coagulation system

Directory of Open Access Journals (Sweden)

Sanjeev Palta

2014-01-01

Full Text Available Coagulation is a dynamic process and the understanding of the blood coagulation system has evolved over the recent years in anaesthetic practice. Although the traditional classification of the coagulation system into extrinsic and intrinsic pathway is still valid, the newer insights into coagulation provide more authentic description of the same. Normal coagulation pathway represents a balance between the pro coagulant pathway that is responsible for clot formation and the mechanisms that inhibit the same beyond the injury site. Imbalance of the coagulation system may occur in the perioperative period or during critical illness, which may be secondary to numerous factors leading to a tendency of either thrombosis or bleeding. A systematic search of literature on PubMed with MeSH terms ′coagulation system, haemostasis and anaesthesia revealed twenty eight related clinical trials and review articles in last 10 years. Since the balance of the coagulation system may tilt towards bleeding and thrombosis in many situations, it is mandatory for the clinicians to understand physiologic basis of haemostasis in order to diagnose and manage the abnormalities of the coagulation process and to interpret the diagnostic tests done for the same.

Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR): Part 1, Overview of NUCLARR data retrieval: User's guide

International Nuclear Information System (INIS)

Gilmore, W.E.; Gentillon, C.D.; Gertman, D.I.; Beers, G.H.; Galyean, W.J.; Gilbert, B.G.

1988-06-01

The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability and hardware component failure data. The NUCLARR system software resides on an IBM (or compatible) personal micro-computer. NUCLARR can be used by the end user to furnish data inputs for both human and hardware reliability analysis in support of a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. Volume IV of this series is the User's Guide for operating the NUCLARR software and is presented in three parts. This document, Part 1: Overview of NUCLARR Data Retrieval provides an introductory overview to the system's capabilities and procedures for data retrieval. The methods and criteria for selection of data sources and entering them into the NUCLARR system are also described in this document

River Basin Information System: Open Environmental Data Management for Research and Decision Making

Directory of Open Access Journals (Sweden)

Franziska Zander

2016-07-01

Full Text Available An open, standardized data management and related service infrastructure is a crucial requirement for a seamless storage and exchange of data and information within research projects, for the dissemination of project results and for their application in decision making processes. However, typical project databases often refer to only one research project and are limited to specific purposes. Once implemented, those systems are often not further maintained and updated, rendering the stored information useless once the system stops operating. The River Basin Information System (RBIS presented here is designed to fit not only the requirements of one research project, but focuses on generic functions, extensibility and standards compliance typically found in interdisciplinary environmental research. Developed throughout more than 10 years of research cooperation worldwide, RBIS is designed to manage different types of environmental data with and without spatial context together with a rich set of metadata. Beside data management and storage, RBIS provides functions for the visualization, linking, analysis and processing of different types of data to support research, decision making, result dissemination and information discovery for all kinds of users. The focus of this paper is on the description of the technical implementation and the presentation of functions. This will be complemented by an overview of example applications and experiences during RBIS development and operation.

[Quality management in surgery--an overview of methods and possibilities].

Science.gov (United States)

Schmidt, C; Möller, J; Reibe, F; Güntert, B; Kremer, B

2003-06-01

Numerous methods of assessing quality in health care have been presented over the last years. Since the German health care reform of 2000 introduced a legal obligation to quality assurance, hospitals have to meet that condition. However, no specific system of quality assurance was implicated. Therefore, many potential users search for systems suiting their own needs. However, German hospitals can benefit from international experience in quality management. Accreditation, visitation, excellence schemes, and certification seem to be the dominant methods. Every method is worthy of hospital evaluation. Certifications illustrate the quality system view without regard to profession, while excellence schemes evaluate the development of quality management in hospitals. Accreditation portrays a specific hospital as a whole, while visitations follow the professional perspective of quality assurance. Depending on the perspective and aims, there are advantages and disadvantages in each method. Finally, a combination of two may also be helpful. Indeed, no "role model" exists yet for assessing quality in health care. These methods of quality management are applicable especially in surgery, because a variety of standard outcome parameters such as length of stay, duration of procedure, and complication and relapse rates are already available.

Overview of social acceptability of nuclear energy

Energy Technology Data Exchange (ETDEWEB)

Ibrahim, Jamal Khaer [PUSPATI, Selangor (Malaysia)

1984-12-01

A comparative evaluation for the role of nuclear energy in the Society is overviewed. Factors pertaining to its social acceptability such as military connotation, radioactive waste management and nuclear plant safety, to name a few, are also discussed.

Air Traffic Management Research at NASA Ames

Science.gov (United States)

Davis, Thomas J.

2012-01-01

The Aviation Systems Division at the NASA Ames Research Center conducts leading edge research in air traffic management concepts and technologies. This overview will present concepts and simulation results for research in traffic flow management, safe and efficient airport surface operations, super density terminal area operations, separation assurance and system wide modeling and simulation. A brief review of the ongoing air traffic management technology demonstration (ATD-1) will also be presented. A panel discussion, with Mr. Davis serving as a panelist, on air traffic research will follow the briefing.

Intelligent Systems For Aerospace Engineering: An Overview

Science.gov (United States)

KrishnaKumar, K.

2003-01-01

Intelligent systems are nature-inspired, mathematically sound, computationally intensive problem solving tools and methodologies that have become extremely important for advancing the current trends in information technology. Artificially intelligent systems currently utilize computers to emulate various faculties of human intelligence and biological metaphors. They use a combination of symbolic and sub-symbolic systems capable of evolving human cognitive skills and intelligence, not just systems capable of doing things humans do not do well. Intelligent systems are ideally suited for tasks such as search and optimization, pattern recognition and matching, planning, uncertainty management, control, and adaptation. In this paper, the intelligent system technologies and their application potential are highlighted via several examples.

The systems engineering overview and process (from the Systems Engineering Management Guide, 1990)

Science.gov (United States)

1993-01-01

The past several decades have seen the rise of large, highly interactive systems that are on the forward edge of technology. As a result of this growth and the increased usage of digital systems (computers and software), the concept of systems engineering has gained increasing attention. Some of this attention is no doubt due to large program failures which possibly could have been avoided, or at least mitigated, through the use of systems engineering principles. The complexity of modern day weapon systems requires conscious application of systems engineering concepts to ensure producible, operable and supportable systems that satisfy mission requirements. Although many authors have traced the roots of systems engineering to earlier dates, the initial formalization of the systems engineering process for military development began to surface in the mid-1950s on the ballistic missile programs. These early ballistic missile development programs marked the emergence of engineering discipline 'specialists' which has since continued to grow. Each of these specialties not only has a need to take data from the overall development process, but also to supply data, in the form of requirements and analysis results, to the process. A number of technical instructions, military standards and specifications, and manuals were developed as a result of these development programs. In particular, MILSTD-499 was issued in 1969 to assist both government and contractor personnel in defining the systems engineering effort in support of defense acquisition programs. This standard was updated to MIL-STD499A in 1974, and formed the foundation for current application of systems engineering principles to military development programs.

An overview of the V&V of Flight-Critical Systems effort at NASA

Science.gov (United States)

Brat, Guillaume P.

2011-01-01

As the US is getting ready for the Next Generation (NextGen) of Air Traffic System, there is a growing concern that the current techniques for verification and validation will not be adequate for the changes to come. The JPDO (in charge of implementing NextGen) has given NASA a mandate to address the problem and it resulted in the formulation of the V&V of Flight-Critical Systems effort. This research effort is divided into four themes: argument-based safety assurance, distributed systems, authority and autonomy, and, software intensive systems. This paper presents an overview of the technologies that will address the problem.

Overview of the Energy Storage Systems for the Wind Power Integration Enhancement

DEFF Research Database (Denmark)

Swierczynski, Maciej Jozef; Teodorescu, Remus; Rasmussen, Claus Nygaard

2010-01-01

intermittency, partly unpredictability and variability, wind power can put the operation of power system into risk. This can lead to problems with grid stability, reliability and the energy quality. One of the possible solutions can be an addition of energy storage into wind power plant. This paper deals...... with state of the art of the Energy Storage (ES) technologies and their possibility of accommodation for wind turbines. Overview of ES technologies is done in respect to its suitability for Wind Power Plant (WPP). Services that energy storage can offer both to WPP and power system are discussed. Moreover...

Management information systems

Energy Technology Data Exchange (ETDEWEB)

Crump, K.

1978-01-01

An Australian university architect studying management information systems programs at academic institutions in the United States visited 26 universities and colleges and nine educational and professional associations, including extended visits at the University of Wisconsin and the National Center of Higher Education Management Systems. During these visits, he investigated university and college space utilization programs, gained operational and developmental experience at institutions with education philosophies similar to those in Australia, and examined trends in low cost student housing. This report of his observations focusses on management information systems projects throughout the academic community, resource accountability, energy conservation, facilities planning for the handicapped, student housing, and interdisciplinary approaches to education.

NASA and FAA Programs in Air Traffic Management

Science.gov (United States)

Condon, Gregory W.

1995-01-01

This presentation will present an overview of NASA and joint NASA/FAA R&D programs related to Air Traffic Management. In addition it will address the plans for the new Advanced Air Transportation Technologies program, which will investigate methods for achieving the airline industries needs for increased flexibility in the nation's air traffic management system.

An Overview of Android Operating System and Its Security Features

OpenAIRE

Rajinder Singh

2014-01-01

Android operating system is one of the most widely used operating system these days. Android Operating System is mainly divided into four main layers: the kernel, libraries, application framework and applications. Its kernel is based on Linux. Linux kernel is used to manage core system services such as virtual memory, networking, drivers, and power management. In these paper different features of architecture of Android OS as well security features of Android OS are discussed.

Web-based energy information systems for energy management and demand response in commercial buildings

Energy Technology Data Exchange (ETDEWEB)

Motegi, Naoya; Piette, Mary Ann; Kinney, Satkartar; Herter, Karen

2003-04-18

Energy Information Systems (EIS) for buildings are becoming widespread in the U.S., with more companies offering EIS products every year. As a result, customers are often overwhelmed by the quickly expanding portfolio of EIS feature and application options, which have not been clearly identified for consumers. The object of this report is to provide a technical overview of currently available EIS products. In particular, this report focuses on web-based EIS products for large commercial buildings, which allow data access and control capabilities over the Internet. EIS products combine software, data acquisition hardware, and communication systems to collect, analyze and display building information to aid commercial building energy managers, facility managers, financial managers and electric utilities in reducing energy use and costs in buildings. Data types commonly processed by EIS include energy consumption data; building characteristics; building system data, such as heating, ventilation, and air-conditioning (HVAC) and lighting data; weather data; energy price signals; and energy demand-response event information. This project involved an extensive review of research and trade literature to understand the motivation for EIS technology development. This study also gathered information on currently commercialized EIS. This review is not an exhaustive analysis of all EIS products; rather, it is a technical framework and review of current products on the market. This report summarizes key features available in today's EIS, along with a categorization framework to understand the relationship between EIS, Energy Management and Control Systems (EMCSs), and similar technologies. Four EIS types are described: Basic Energy Information Systems (Basic-EIS); Demand Response Systems (DRS); Enterprise Energy Management (EEM); and Web-based Energy Management and Control Systems (Web-EMCS). Within the context of these four categories, the following characteristics of EIS

Quality, risk management and governance in mental health: an overview.

Science.gov (United States)

Callaly, Tom; Arya, Dinesh; Minas, Harry

2005-03-01

To consider the origin, current emphasis and relevance of the concepts of quality, risk management and clinical governance in mental health. Increasingly, health service boards and management teams are required to give attention to clinical governance rather than corporate governance alone. Clinical governance is a unifying quality concept that aims to produce a structure and systems to assure and improve the quality of clinical services by promoting an integrated and organization-wide approach towards continuous quality improvement. Many psychiatrists will find the reduction in clinical autonomy, the need to consider the welfare of the whole population as well as the individual patient for whom they are responsible, and the requirement that they play a part in a complex systems approach to quality improvement to be a challenge. Avoiding or ignoring this challenge will potentially lead to conflict with modern management approaches and increased loss of influence on future developments in mental health services.

A system and approach for total pipeline integrity management

Energy Technology Data Exchange (ETDEWEB)

Porter, Todd; Neidhardt, Dietmar [Tuboscope Pipeline Services, Houston, TX (United States); Gonzalez, Oscar [Tuboscope Mexico S.A. de C.V., Mexico, D.F. (Mexico)

2005-07-01

Pipeline rehabilitation and maintenance decisions are made using a wide variety of data, criteria, and expertise. The goal is to arrive at an optimal plan that considers risk and best return on Repair and Maintenance (R and M) expenditures for aging pipeline systems in both regulated and non-regulated environments. In order to achieve these goals, historical, operations, and assessment data is gathered, aligned and integrated as part of a baseline assessment. Integrity threats are identified based on operations and industry experience, and combined with potential consequences to public safety, the environment, and business to clearly delineate high risk exposure segments in the system. Integrity assessments are conducted in a prioritized manner, using the most appropriate technology and methods to address the threats. These include In Line Inspection technologies: MFL, Deformation, UT, INS (combinations thereof), Direct Assessment for EC and SCC threats, Hydro testing, and other indirect methods. From these results, decisions are made and R and M plans developed. To arrive at an optimal R and M plan, proper use of existing data, new integrity assessment data, and decision risk models is required. This paper presentation will detail the tactical aspect of an effective integrity management platform. Experience in decision support, operations priorities and execution of a rehabilitation plan using LinaView Pro{sup TM} integrity management system with risk-based integrity tools and maintenance planning will be presented. A process overview, results, and benefits will be given using these examples from operating oil and gas transmission pipelines. (author)

The ALICE Glance Shift Accounting Management System (SAMS)

Science.gov (United States)

Martins Silva, H.; Abreu Da Silva, I.; Ronchetti, F.; Telesca, A.; Maidantchik, C.

2015-12-01

ALICE (A Large Ion Collider Experiment) is an experiment at the CERN LHC (Large Hadron Collider) studying the physics of strongly interacting matter and the quark-gluon plasma. The experiment operation requires a 24 hours a day and 7 days a week shift crew at the experimental site, composed by the ALICE collaboration members. Shift duties are calculated for each institute according to their correlated members. In order to ensure the full coverage of the experiment operation as well as its good quality, the ALICE Shift Accounting Management System (SAMS) is used to manage the shift bookings as well as the needed training. ALICE SAMS is the result of a joint effort between the Federal University of Rio de Janeiro (UFRJ) and the ALICE Collaboration. The Glance technology, developed by the UFRJ and the ATLAS experiment, sits at the basis of the system as an intermediate layer isolating the particularities of the databases. In this paper, we describe the ALICE SAMS development process and functionalities. The database has been modelled according to the collaboration needs and is fully integrated with the ALICE Collaboration repository to access members information and respectively roles and activities. Run, period and training coordinators can manage their subsystem operation and ensure an efficient personnel management. Members of the ALICE collaboration can book shifts and on-call according to pre-defined rights. ALICE SAMS features a user profile containing all the statistics and user contact information as well as the Institutes profile. Both the user and institute profiles are public (within the scope of the collaboration) and show the credit balance in real time. A shift calendar allows the Run Coordinator to plan data taking periods in terms of which subsystems shifts are enabled or disabled and on-call responsible people and slots. An overview display presents the shift crew present in the control room and allows the Run Coordination team to confirm the presence

Personnel Identity Management and the Expeditionary Strike Group

National Research Council Canada - National Science Library

Neises, Glen E

2007-01-01

.... Chapter I defines IM and explains why IM is important for the Department of Defense (DoD). Chapter II provides an overview of DoD human resource management and Defense Manpower Data Center information systems...

Management and control of microbiologically influenced corrosion (MIC) in the oil and gas industry - Overview and a North Sea case study

DEFF Research Database (Denmark)

Skovhus, Torben Lund; Eckert, Richard B; Rodrigues, Edgar

2017-01-01

the oil and gas industry has seen regarding MIC research over the past decade. The paper starts out with an overview of where in the process stream MIC occurs - from the oil reservoir to the consumer. Both biotic and abiotic corrosion mechanisms are explained in the context of managing MIC using...... to manage the corrosion threat, operators commonly use models to support decision making. The models use qualitative, semi-quantitative or quantitative measures to help assess the rate of degradation caused by MIC. The paper reviews four existing models for MIC Threat Assessment and describe a new model...

Department of Energy Hazardous Waste Remedial Actions Program: An overview

International Nuclear Information System (INIS)

Eyman, L.D.; Swiger, R.F.

1988-01-01

This paper describes the national Department of Energy (DOE) program for managing hazardous waste. An overview of the DOE Hazardous Waste Remedial Actions Program (HAZWRAP), including its mission, organizational structure, and major program elements, is given. The paper focuses on the contractor support role assigned to Martin Marietta Energy Systems, Inc., through the establishment of the HAZWRAP Support Contractor Office (SCO). The major SCO programs are described, and the organization for managing the programs is discussed. The HAZWRAP SCO approaches to waste management planning and to technology research, development, and demonstration are presented. The role of the SCO in the DOE Environmental Restoration Program and the development of the DOE Waste Information network are reviewed. Also discussed is the DOE Work for Others Program, where waste management decentralized support, via interagency agreements between DOE and the Department of Defense and DOE and the Environmental Protection Agency, is provided for those sponsors planning remedial response actions. 2 refs

Managing Conflict in Temporary Management Systems

Science.gov (United States)

Wilemon, David L.

1973-01-01

As organizational tasks have grown more complex, several innovative temporary management systems such as matrix management have been developed. The Apollo space program has been an important contribution to the development of matrix management techniques. Discusses the role of conflict within the matrix, its determinants, and the process of…

HAMMLAB 2000 overview

International Nuclear Information System (INIS)

Kvalem, J.

1998-01-01

In the form of a collection of overheads, this is an overview of HAMMLAB 2000. It also covers project organization, advisory groups, research agenda, status of simulators, status of software systems, VR Centre, Petro Hammlab and physical planning

Overview of the CANDU fuel handling system for advanced fuel cycles

International Nuclear Information System (INIS)

Koivisto, D.J.; Brown, D.R.

1997-01-01

Because of its neutron economies and on-power re-fuelling capabilities the CANDU system is ideally suited for implementing advanced fuel cycles because it can be adapted to burn these alternative fuels without major changes to the reactor. The fuel handling system is adaptable to implement advanced fuel cycles with some minor changes. Each individual advanced fuel cycle imposes some new set of special requirements on the fuel handling system that is different from the requirements usually encountered in handling the traditional natural uranium fuel. These changes are minor from an overall plant point of view but will require some interesting design and operating changes to the fuel handling system. Some preliminary conceptual design has been done on the fuel handling system in support of these fuel cycles. Some fuel handling details were studies in depth for some of the advanced fuel cycles. This paper provides an overview of the concepts and design challenges. (author)

Management systems in production operations

International Nuclear Information System (INIS)

Walters, K.B.; Henderson, G.

1993-01-01

The Cullen Enquiry into the Piper Alpha disaster in the U.K. North Sea recommended that an operator should formally present it's company Management System and demonstrate how safety is achieved throughout the life cycle of a platform, from design through operation to abandonment. Brunei Shell Petroleum has prepared a corporate level Safety Management System. As part of Safety Case work, the corporate system is being extended to include the development of specific Management Systems with particular emphasis on offshore production operations involving integrated oil and gas facilities. This paper will describe the development of Management Systems, which includes an intensive Business Process Analysis and will comment upon it's applicability and relationship to ISO 9000. The paper will further describe the applicability and benefits of Management Systems and offer guidance on required effort. The paper will conclude that development of structured Management Systems for safety critical business processes is worthwhile but prioritization of effort will be necessary. As such the full adoption of Management Systems will be directional in nature

glideinWMS - A generic pilot-based Workload Management System

International Nuclear Information System (INIS)

Sfiligoi, Igor

2007-01-01

The Grid resources are distributed among hundreds of independent Grid sites, requiring a higher level Workload Management System (WMS) to be used efficiently. Pilot jobs have been used for this purpose by many communities, bringing increased reliability, global fair share and just in time resource matching. GlideinWMS is a WMS based on the Condor glidein concept, i.e. a regular Condor pool, with the Condor daemons (startds) being started by pilot jobs, and real jobs being vanilla, standard or MPI universe jobs. The glideinWMS is composed of a set of Glidein Factories, handling the submission of pilot jobs to a set of Grid sites, and a set of VO Frontends, requesting pilot submission based on the status of user jobs. This paper contains the structural overview of glideinWMS as well as a detailed description of the current implementation and the current scalability limits

glideinWMS-a generic pilot-based workload management system

International Nuclear Information System (INIS)

Sfiligoi, I

2008-01-01

The Grid resources are distributed among hundreds of independent Grid sites, requiring a higher level Workload Management System (WMS) to be used efficiently. Pilot jobs have been used for this purpose by many communities, bringing increased reliability, global fair share and just in time resource matching. glideinWMS is a WMS based on the Condor glidein concept, i.e. a regular Condor pool, with the Condor daemons (startds) being started by pilot jobs, and real jobs being vanilla, standard or MPI universe jobs. The glideinWMS is composed of a set of Glidein Factories, handling the submission of pilot jobs to a set of Grid sites, and a set of VO Frontends, requesting pilot submission based on the status of user jobs. This paper contains the structural overview of glideinWMS as well as a detailed description of the current implementation and the current scalability limits

Management Information Systems Research.

Science.gov (United States)

Research on management information systems is illusive in many respects. Part of the basic research problem in MIS stems from the absence of standard...decision making. But the transition from these results to the realization of ’satisfactory’ management information systems remains difficult indeed. The...paper discusses several aspects of research on management information systems and reviews a selection of efforts that appear significant for future progress. (Author)

Construction Management Risk System (CMRS for Construction Management (CM Firms

Directory of Open Access Journals (Sweden)

Kyungmo Park

2017-02-01

Full Text Available After the global financial crisis of 2008, the need for risk management arose because it was necessary to minimize the losses in construction management (CM firms. This was caused by a decreased amount of orders in the Korean CM market, which intensified order competition between companies. However, research results revealed that risks were not being systematically managed owing to the absence of risk management systems. Thus, it was concluded that it was necessary to develop standard operating systems and implement risk management systems in order to manage risks effectively. Therefore, the purpose of this study was to develop a construction risk management system (CRMS for systematically managing risks. For this purpose, the field operation managers of CM firms were interviewed and surveyed in order to define risk factors. Upon this, a risk assessment priority analysis was performed. Finally, a risk management system that comprised seven modules and 20 sub-modules and was capable of responding systematically to risks was proposed. Furthermore, the effectiveness of this system was verified through on-site inspection. This system allows early response to risks, accountability verification and immediate response to legal disputes with clients by managing risk records.

Development of Information Management System for Plant Life Cycle Management

International Nuclear Information System (INIS)

Byon, SuJin; Lee, SangHyun; Kim, WooJoong

2015-01-01

The study subjects are S. Korean NPP(Nuclear Power Plant) construction projects. Design, construction, operations companies have different nuclear power plant construction project structures, and each company has its own Information Management System. In this study, the end user developed an Information Management System early in the project, and developed a management structure that systematically integrates and interfaces with information in each lifecycle phase. The main perspective of Information Management is moving from the existent document-centric management to the data-centric management. To do so, we intend to integrate information with interfaces among systems. Integrated information management structure and management system are essential for an effective management of the lifecycle information of nuclear power plants that have a lifespan over as much as 80 years. The concept of integration management adopted by the defence, ocean industries or various PLM solution providers is important. Although the NPP project has application systems in each key lifecycle phase, it is more effective to develop and use PLIMS in consideration of the interface and compatibility of information among systems. As an initial study for development of that integrated information management structure, this study is building the system and has interfaced it with a design-stage system

Development of Information Management System for Plant Life Cycle Management

Energy Technology Data Exchange (ETDEWEB)

Byon, SuJin; Lee, SangHyun; Kim, WooJoong [KOREA HYDRO and NUCLEAR POWER CO. LTD, Daejeon (Korea, Republic of)

2015-10-15

The study subjects are S. Korean NPP(Nuclear Power Plant) construction projects. Design, construction, operations companies have different nuclear power plant construction project structures, and each company has its own Information Management System. In this study, the end user developed an Information Management System early in the project, and developed a management structure that systematically integrates and interfaces with information in each lifecycle phase. The main perspective of Information Management is moving from the existent document-centric management to the data-centric management. To do so, we intend to integrate information with interfaces among systems. Integrated information management structure and management system are essential for an effective management of the lifecycle information of nuclear power plants that have a lifespan over as much as 80 years. The concept of integration management adopted by the defence, ocean industries or various PLM solution providers is important. Although the NPP project has application systems in each key lifecycle phase, it is more effective to develop and use PLIMS in consideration of the interface and compatibility of information among systems. As an initial study for development of that integrated information management structure, this study is building the system and has interfaced it with a design-stage system.

Overview of the spent fuel management policy in Finland

International Nuclear Information System (INIS)

Manninen, Jussi

1985-01-01

The basic factors affecting the spent fuel management policy are highlighted: small size of the nuclear programme in the worldwide scale, no recycling of plutonium envisaged, no governmental organizations for back-end operations foreseen. The prinsiple objective of the policy permanent disposal of high-level wastes irrevocably outside the domestic territory, and the limited success in its implementation are discussed. The preparations of the implementation of the back-up alternative, direct disposal of spent fuel in the Finnish bedrock are described. The basic philosophy behind the system of funding the future waste management costs is clarified. (author)

Strategic management of health care information systems: nurse managers' perceptions.

Science.gov (United States)

Lammintakanen, Johanna; Kivinen, Tuula; Saranto, Kaija; Kinnunen, Juha

2009-01-01

The aim of this study is to describe nurse managers' perceptions of the strategic management of information systems in health care. Lack of strategic thinking is a typical feature in health care and this may also concern information systems. The data for this study was collected by eight focus group interviews including altogether 48 nurse managers from primary and specialised health care. Five main categories described the strategic management of information systems in health care; IT as an emphasis of strategy; lack of strategic management of information systems; the importance of management; problems in privacy protection; and costs of IT. Although IT was emphasised in the strategies of many health care organisations, a typical feature was a lack of strategic management of information systems. This was seen both as an underutilisation of IT opportunities in health care organisations and as increased workload from nurse managers' perspective. Furthermore, the nurse managers reported that implementation of IT strengthened their managerial roles but also required stronger management. In conclusion, strategic management of information systems needs to be strengthened in health care and nurse managers should be more involved in this process.

Medical-Information-Management System

Science.gov (United States)

Alterescu, Sidney; Friedman, Carl A.; Frankowski, James W.

1989-01-01

Medical Information Management System (MIMS) computer program interactive, general-purpose software system for storage and retrieval of information. Offers immediate assistance where manipulation of large data bases required. User quickly and efficiently extracts, displays, and analyzes data. Used in management of medical data and handling all aspects of data related to care of patients. Other applications include management of data on occupational safety in public and private sectors, handling judicial information, systemizing purchasing and procurement systems, and analyses of cost structures of organizations. Written in Microsoft FORTRAN 77.

Overview of radioactive waste management

International Nuclear Information System (INIS)

Ritter, G.L.

1980-01-01

The question of what to do with radioactive wastes is discussed. The need to resolve this issue promptly is pointed out. Two significant events which have occurred during the Carter administration are discussed. An Interagency Review Group (IRG) on waste management was formed to formulate recommendations leading to the establishment of a National policy for managing radioactive wastes. The technical findings in the IRG report are listed. The author points out some issues not addressed by the report. President Carter issued a national policy statement on Radioactive Waste Management in February 1980. The most significant elements of this statement are summarized. The cancellation of the Waste Isolation Pilot Plant is currently meeting opposition in Congress. This and other items in the National Policy Statement are discussed

Measuring and Managing Value Co-Creation Process: Overview of Existing Theoretical Models

Directory of Open Access Journals (Sweden)

Monika Skaržauskaitė

2013-08-01

Full Text Available Purpose — the article is to provide a holistic view on concept of value co-creation and existing models for measuring and managing it by conducting theoretical analysis of scientific literature sources targeting the integration of various approaches. Most important and relevant results of the literature study are presented with a focus on changed roles of organizations and consumers. This article aims at contributing theoretically to the research stream of measuring co-creation of value in order to gain knowledge for improvement of organizational performance and enabling new and innovative means of value creation. Design/methodology/approach. The nature of this research is exploratory – theoretical analysis and synthesis of scientific literature sources targeting the integration of various approaches was performed. This approach was chosen due to the absence of established theory on models of co-creation, possible uses in organizations and systematic overview of tools measuring/suggesting how to measure co-creation. Findings. While the principles of managing and measuring co-creation in regards of consumer motivation and involvement are widely researched, little attempt has been made to identify critical factors and create models dealing with organizational capabilities and managerial implications of value co-creation. Systematic analysis of literature revealed a gap not only in empirical research concerning organization’s role in co-creation process, but in theoretical and conceptual levels, too. Research limitations/implications. The limitations of this work as a literature review lies in its nature – the complete reliance on previously published research papers and the availability of these studies. For a deeper understanding of co-creation management and for developing models that can be used in real-life organizations, a broader theoretical, as well as empirical, research is necessary. Practical implications. Analysis of the

Fiber-Optic Sensing System: Overview, Development and Deployment in Flight at NASA

Science.gov (United States)

Chan, Hon Man; Parker, Allen R.; Piazza, Anthony; Richards, W. Lance

2015-01-01

An overview of the research and technological development of the fiber-optic sensing system (FOSS) at the National Aeronautics and Space Administration Armstrong Flight Research Center (NASA AFRC) is presented. Theory behind fiber Bragg grating (FBG) sensors, as well as interrogation technique based on optical frequency domain reflectometry (OFDR) is discussed. Assessment and validation of FOSS as an accurate measurement tool for structural health monitoring is realized in the laboratory environment as well as large-scale flight deployment.

Overview of EU research activities in transmutation and innovative reactor systems within the Euratom framework programmes

International Nuclear Information System (INIS)

Bhatnagar, V.

2009-01-01

European Community (EC) (currently 27 Member States) shared-cost research has been organised in Framework Programmes (FP) of durations of 4 - 5 years since 1984. The 6th European Atomic Energy Community (EURATOM) Framework Programme (2002 - 06) and the current 7th FP (2007 - 11) have been allocated a fission research budget respectively of 209 and 287 Million Euro from the EC. There are 10 projects (total budget 70 M Euro, EC contribution 38 M Euro) in all aspects of transmutation ranging from road-mapping exercise to large integrated projects on accelerator driven systems, lead-cooled fast critical systems for waste transmutation, technology, fuel, accelerator facilities for nuclear data etc. In Innovative Reactor concepts, there are about half-a-dozen projects (total budget 30 M Euro, EC contribution 16 M Euro) including High Temperature Reactors, Gas-cooled Fast reactors, road-mapping exercise on sodium fast reactors etc. The main research and training activities in FP7 are: management of radioactive waste, reactor systems, radiation protection, infrastructures, human resources and mobility and training. In the two call for proposals (2007 and 2008) in FP7, 8 projects have been accepted in transmutation and innovative reactor concepts (total budget 53 M Euro, EC contribution 32 M Euro). These research projects cover activities ranging from materials, fuels, treatment of irradiated graphite waste, European sodium fast reactor to the establishment of a Central Design Team of a fast-spectrum transmutation device in Europe. The third call for proposals is underway requesting proposals on nuclear data, thermal hydraulics, gas and lead-cooled fast reactor systems with a total EC budget of 20 M Euro. International collaboration is an important element of the EU research policy. This overview paper will present elements of the strategy of EURATOM research and training in waste management including accelerator driven transmutation systems and Innovative reactor concepts

Integrated management system

International Nuclear Information System (INIS)

Florescu, N.

2003-01-01

A management system is developed in order to reflect the needs of the business and to ensure that the objectives of the organization will be achieved. The process model and each individual process within the system then needs to identify the drives or requirements from external customers and stakeholders, regulations, and standards such as ISO and 50-C-Q. The processes are then developed to address these drivers. Developing the process in this way makes it fully integrated and capable of incorporating any new requirements. The International Standard (ISO 9000:2000) promotes the adoption of a process approach when developing, implementing and improving the effectiveness of a quality management system to enhance customer satisfaction by meeting customer requirements. The IAEA Code recognizes that the entire work is a process which can be planned, assessed and improved. For an organization to function effectively, numerous linked activities have to be identified and managed. By definition a process is an activity that using resources and taking into account all the constraints imposed executes the necessary operations which transform the inputs in outcomes. Running a system of processes within an organization, identification of the interaction between the processes and their management can be referred to as a 'process approach'. The advantage of such an approach is the ensuring of the ongoing control over the linkage between the individual processes composing the system as well as over their combination and interaction. Developing a management system implies: identification of the process which delivers Critical Success Factor (CSFs) of the business; identifying the support processes enabling the CSFs to be accomplished; identifying the processes that deliver the business fundamentals. An integrated management system should include all activities not only those related to Quality, Health and Safety. When developing an IMS it is necessary to identify all of the drivers

The Effect of Information Security Management on Organizational Processes Integration in Supply Chain

OpenAIRE

Mohsen Shafiei Nikabadi; Ahmad Jafarian; Azam Jalili Bolhasani

2012-01-01

: The major purpose of this article was that how information security management has effect on supply chain integration and the effect of implementing "information security management system" on enhancing supplies chain integration. In this respect, current research was seeking a combination overview to these tow approaches (Information Security Management and Organizational Processes Integration by Enterprise Resources Planning System) and after that determined factors of these two import...

EURO HAWK Project Overview

National Research Council Canada - National Science Library

2003-01-01

Briefing charts from presentation on a EURO HAWK project overview; an airborne system with stand-off capability for wide-area intelligence, surveillance and reconnaissance meeting European NATO countries' ISR requirements...

Quality management using model-driven engineering: an overview

OpenAIRE

Ruiz-Rube, Iván; Escalona, María José

2014-01-01

Quality Management (QM) is one of the critical points of any software development process. In recent years, several proposals have emerged on this issue, mainly with regard to maturity models, quality standards and best practices collections. Besides, Model Driven Engineering (MDE) aims to build software systems through the construction and transformation of models. However, MDE might be used for other different tasks. In this poster, we summarize the main contributions abou...

Monitoring as an information management task in hospitals

Directory of Open Access Journals (Sweden)

Wentz, Bernhard

2008-08-01

Full Text Available The increasing complexity of information systems requires a systematic monitoring of the information system’s architecture, components, and operation within the strategic, tactical, and operational information management. While there exists a broad methodical assistance for information system’s planning and directing, the monitoring aspect suffers from lacking awareness of the problem on the part of the information manager and missing knowledge about appropriate methods. The paper emphasizes the need for systematic monitoring and gives an overview of the most important methods and tools to support systematic monitoring of the HIS and its components. The overview is presented according to the levels of information management. Basis were best practice approaches like ITIL and COBIT, economic science’s approaches like the Balanced Scorecard as well as appropriate information management’s literature.

Business advertisements management system

OpenAIRE

Rekel, Ernest

2017-01-01

Business Advertisements Management System The main goal of the project was to create a business advertisements management system, where users could easily create and find business advertisements. To accomplish this goal exist- ing systems were analyzed as well as their limitations. The end result is a working system which is able to store and proccess huge amount of data.

Nuclear information: An overview of IAEA's activities

International Nuclear Information System (INIS)

Marchesi, I.H.; Konstantinov, L.V.

1986-01-01

As stated in this overview of IAEA nuclear information activities the Agency's role in information services is rapidly evolving and multifaceted. The Agency maintains more than 200 computerized files of information. Some 60 of these are part of systems directly related to nuclear activities. Some of these are briefly profiled in this overview such as INIS, the IAEA Nuclear Data Programme, the IAEA Incident Reporting System, the IAEA Energy and Economic Databank, the IAEA Power Reactor Information System, the Nuclear Fuel Cycle Information System, and the International Uranium Geology Information System. Future directions are pointed out. Different ways to upgrade information systems are listed

Pembangunan Model Restaurant Management System

OpenAIRE

Fredy Jingga; Natalia Limantara

2014-01-01

Model design for Restaurant Management System aims to help in restaurant business process, where Restaurant Management System (RMS) help the waitress and chef could interact each other without paper limitation.  This Restaurant Management System Model develop using Agile Methodology and developed based on PHP Programming Langguage. The database management system is using MySQL. This web-based application model will enable the waitress and the chef to interact in realtime, from the time they a...

Non-deposit system option for waste management on small islands.

Science.gov (United States)

Vilms, Monica; Voronova, Viktoria

2016-08-01

This paper analyses waste management on small islands (on a global scale these are micro-islands). In the context of the paper, small islands are islands that have an area less than 50 km(2) The study presents an overview of the problems connected with waste transport from islands to the mainland. Waste generation on islands is very much related to tourists. If tourists do not handle waste properly, it will cause problems. Four small Estonian islands in the range of 3-19 km(2) are studied in detail. For these and other small islands, the main problem is the waste produced by tourists, or related to tourists and waste transport to the mainland. Currently, the local municipality has to arrange and finance waste transport. In fact, and based on the polluter-pays principle, the tourists should bear the cost of waste management. There are different tax options available in order to collect the money from tourists - waste tax, harbour tax, tourist tax, donations, environmental tax and others. The study results revealed that the best possible solution for Estonian islands may be a non-deposit system - including an additional charge on ferry ticket prices. The extra money should cover the costs of waste management and waste shipping. The tourists arriving in their own boats should pay a harbour tax, which includes a waste tax to compensate for the cost of waste management. © The Author(s) 2016.

Overview of Maximum Power Point Tracking Techniques for Photovoltaic Energy Production Systems

DEFF Research Database (Denmark)

Koutroulis, Eftichios; Blaabjerg, Frede

2015-01-01

A substantial growth of the installed photovoltaic systems capacity has occurred around the world during the last decade, thus enhancing the availability of electric energy in an environmentally friendly way. The maximum power point tracking technique enables maximization of the energy production...... of photovoltaic sources during stochastically varying solar irradiation and ambient temperature conditions. Thus, the overall efficiency of the photovoltaic energy production system is increased. Numerous techniques have been presented during the last decade for implementing the maximum power point tracking...... process in a photovoltaic system. This article provides an overview of the operating principles of these techniques, which are suited for either uniform or non-uniform solar irradiation conditions. The operational characteristics and implementation requirements of these maximum power point tracking...

Senior Management Use of Management Control Systems in Large Companies

DEFF Research Database (Denmark)

Willert, Jeanette; Israelsen, Poul; Rohde, Carsten

2017-01-01

Ferreira and Otley’s (2009) conceptual and holistic framework for performance management systems, supplemented by elements of contextual factors and organisational culture. Further, selected researchers’ perceptions of the purpose of using management control systems are related to practitioners’ ideas......The use of management control systems in large companies remains relatively unexplored. Indeed, only a few studies of senior managers’ use of management control systems consider multiple controls in companies. This paper explores data from a comprehensive survey of the use of management control...... systems in 120 strategic business units at some of the largest companies in Denmark. The paper identifies how senior management guides and controls their subordinates to meet their companies’ objectives. The presentation and discussion of the results, including citations from executive managers, use...

The Stress Management in the Enterprise Management System

Directory of Open Access Journals (Sweden)

Kuzmin Oleh Ye.

2017-05-01

Full Text Available The article systematizes the classification of the type of management by a number of attributes: horizon of ambition, priority style of interaction between management and managed systems, level of centralization, orientation, consideration of environmental impact, contents, type of activity, and response to deviation. Within terms of the attribute of response to deviations, place of the stress management is allocated near to the harmonic and the risk management. It has been substantiated that the stress management is the enterprise management system aimed at overcoming unwanted deviations that are significant, extreme, and have a significant negative impact on the operation of enterprise. In the structure of the stress management, the following integral components have been allocated and characterized: crisis, adaptive, reactive, fears, and anticipative.

Environmental taxation. An overview

International Nuclear Information System (INIS)

Marcus, Vincent; Duboucher, Peggy; Ben Maid, Atika; Devaux, Jeremy; Nicklaus, Doris; Calvet, Melanie; Poupard, Christophe; Pourquier, Francois-Xavier; Vicard, Augustin; Monnoyer-Smith, Laurence

2017-01-01

This official publication proposes a detailed overview of the situation of environmental taxation in France. It first gives a general overview by discussing some key figures, by recalling the chronology of the main environmental taxation arrangements, and by discussing lessons learned from French and foreign experiments for an efficient, acceptable and consistent taxation. The second part proposes a detailed presentation of environmental taxation by distinguishing its main themes and objectives: struggle against climate change, reduction of air pollution and water pollution, and wastes, preservations and development of resources from biodiversity (soil artificialization, sustainable management of fauna and flora), efficient use of non renewable resources and of water (water resources, energetic and mineral raw materials). For each of these themes, the report presents the environmental problematic, and the existing arrangements, and proposes some elements of international comparison. The last part proposes a list of all environmental taxes

Intubations and airway management: An overview of Hassles through third millennium

Directory of Open Access Journals (Sweden)

Abdullah Alanazi

2015-01-01

Full Text Available Background: The placement of a tube into a patient′s trachea "the intubation" as we call is not as simple as it looks. It is a very tricky and tedious maneuver that entails skills to assess and perform. Nevertheless, often this is left to the chores of inefficient hands due to a paucity of the availability of experts. They seldom are able to complete the task and often wind up calling the attention of the unit. The present review is an attempt to describe the need to undertake intubation, the procedures and techniques, the complications, including morbidity and mortality and airway management. This overview includes explicit descriptions of the difficult airway which represents multifaceted interface amid patient factors, clinical setting, and skills of the practitioner. Materials and Methods: To accomplish the target, peer-reviewed English language articles published during third millennium up to 2013 were selected from Pub Med, Pub Med Central, Science Direct, Up-to-date, Med Line, comprehensive databases, Cochrane library, and the Internet (Google, Yahoo. Review of Literature: The review constituted a systematic search of literature on the requirements that necessitate the practice of intubation, different techniques that facilitate easy conduct of procedure, the complications, including, morbidity and mortality, and the airway management. Conclusion: Recording every single detail has been beyond the scope of this review, however; some aspects have been wrapped up in nutshell. Some areas of the review are too basic which the medics are well aware of and knowledgeable. Nevertheless, these are difficult to be dispensed with in consideration of their source to the awareness of a common man and a great majority of the patients.

Management systems for regulatory authorities

International Nuclear Information System (INIS)

Mpandanyama, Rujeko Lynette

2015-02-01

For a regulatory body to fulfil its statutory obligations, there is need to develop and implement a regulatory management system that has the necessary arrangements for achieving and maintaining high quality performance in regulating the safety of nuclear and radiation facilities under its authority. Hence, the regulatory management system needs to fully integrate the human resources, processes and physical resources of the organization. This study sought to provide an understanding of the concept, principles, policies and fundamentals of management systems as they relate to regulatory systems in the field of radiation protection and to make appropriate recommendations to ensure that an effective management system exists for the control of ionizing radiation and radiation sources and addresses all relevant stakeholders in Zimbabwe. A comparative analysis was done on the current management status and the ideal management system, which led to the identification of the gaps existing. The main key that was found to be of significance was lack of linkages between processes and management tools within the institution. (au)

OCRWM Systems Engineering Management Plan (SEMP)

International Nuclear Information System (INIS)

1990-03-01

The Nuclear Waste Policy Act of 1982 established the Office of Civilian Radioactive Waste Management (OCRWM) in the Department of Energy (DOE) to implement a program for the safe and permanent disposal of spent nuclear fuel and high-level radioactive waste. To achieve this objective, the OCRWM is developing an integrated waste-management system consisting of three elements: the transportation system, the monitored retrievable storage (MRS) facility, and the mined geologic disposal system (MGDS). The development of such a system requires management of many diverse disciplines that are involved in research, siting, design, licensing, and external interactions. The purpose of this Systems Engineering Management Plan (SEMP) is to prescribe how the systems-engineering process will be implemented in the development of the waste-management system. Systems engineering will be used by the OCRWM to manage, integrate, and document all aspects of the technical development of the waste-management system and its system elements to ensure that the requirements of the waste-management program are met. It will be applied to all technical activities of the OCRWM program. It will be used by the OCRWM to specify the sequence of technical activities necessary to define the requirements the waste-management system must satisfy, to develop the waste-management system, to relate system elements to each other, and to determine how the waste-management system can be optimized to most effectively satisfy the requirements. Furthermore, systems engineering will be used in the management of Program activities at the program, program-element, and project levels by specifying procedures, studies, reviews, and documentation requirements. 9 refs., 1 fig

Potential of Computerized Maintenance Management System in Facilities Management

Directory of Open Access Journals (Sweden)

Noor Farisya Azahar

2014-07-01

Full Text Available For some time it has been clear that managing buildings or estates has been carried out in the context of what has become known as facilities management. British Institute of Facilities Management defined facilities management is the integration of multi-disciplinary activities within the built environment and the management of their impact upon people and the workplace. Effective facilities management is vital to the success of an organisation by contributing to the delivery of its strategic and operational objectives. Maintenance of buildings should be given serious attention before (stage design, during and after a building is completed. But total involvement in building maintenance is after the building is completed and during its operations. Residents of and property owners require their building to look attractive, durable and have a peaceful indoor environment and efficient. The objective of the maintenance management system is to stream line the vast maintenance information system to improve the productivity of an industrial plant. a good maintenance management system makes equipment and facilities available. This paper will discuss the fundamental steps of maintenance management program and Computerized Maintenance Management System (CMMS

[Quality management in health care - continuous improvement of processes and outcomes].

Science.gov (United States)

Vagts, Dierk A; Martin, Jörg; Dahmen, Klaus

2008-02-01

What is quality, what is quality management? Who is responsible for quality management in a hospital? Which tools, communication instruments and which instruments for feed back are necessary for institutions to control its tasks in a multi-disciplinary environment? Are there various requirements concerning quality management systems in different hospitals or departments? Which tools of quality management are used in German anaesthesia and intensive care departments? This paper gives an introduction to quality management systems in hospitals and an overview of current models in anaesthesia and intensive care medicine.

Configuration Management Program - a part of Integrated Management System

International Nuclear Information System (INIS)

Mancev, Bogomil; Yordanova, Vanja; Nenkova, Boyka

2014-01-01

The recently issued International Atomic Energy Agency (IAEA) publications (GS-R-3, GS-G-3.1 and GS-G-3.5) regarding Management Systems for Facilities and Activities define requirements for creation, introduction, evaluation and continuously improvement of the Management System, which unifies the safety, health, environment, security, quality and economic elements. According to GS-R-3 the Integrated Management System is based on defined processes identified in the enterprises: Managing, Basic and Supporting processes. At implementation of their activities, the organizations often apply other standards in their interrelations with suppliers and the parties concerned - ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007, regarding quality, environment and occupational health and safety management. The integration of the standards of both series ensure the observance of the common management principles that reflect the best practices of management as leadership, participation of the people, process approach, continuously improvement, systematical approach to the management and approach based on facts used at the making decisions. The main objective of the Integrated Management System introduction is to ensure safety considering the influence of all additional impacts taken together. The Integrated Management System is based on the process approach at implementation of the activities in nuclear power plant. The transition to the process oriented approach require long period of time, during which the distribution of the responsibilities is optimized up to the level that will satisfy the requirements, reach and maintain the stipulated objectives. The Configuration Management (CM) is an integrated management process by means of which conformity between design requirements, physical configuration and the plant documentation is ascertained and maintained during the entire life cycle of the facility. Processes within configuration management are not isolated, but are part of

An overview of recent end-to-end wireless medical video telemedicine systems using 3G.

Science.gov (United States)

Panayides, A; Pattichis, M S; Pattichis, C S; Schizas, C N; Spanias, A; Kyriacou, E

2010-01-01

Advances in video compression, network technologies, and computer technologies have contributed to the rapid growth of mobile health (m-health) systems and services. Wide deployment of such systems and services is expected in the near future, and it's foreseen that they will soon be incorporated in daily clinical practice. This study focuses in describing the basic components of an end-to-end wireless medical video telemedicine system, providing a brief overview of the recent advances in the field, while it also highlights future trends in the design of telemedicine systems that are diagnostically driven.

14 CFR 1212.704 - System manager.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false System manager. 1212.704 Section 1212.704... Authority and Responsibilities § 1212.704 System manager. (a) Each system manager is responsible for the following with regard to the system of records over which the system manager has cognizance: (1) Overall...

Building a Culture of Continuous Improvement and Employee Engagement Using a Daily Management System Part 1: Overview.

Science.gov (United States)

Maurer, Marsha; Canacari, Elena; Eng, Kimberly; Foley, Jane; Phelan, Cynthia; Sulmonte, Kimberlyann; Wandel, Jane

2018-03-01

A daily management system (DMS) can be used to implement continuous quality improvement and advance employee engagement. It can empower staff to identify problems in the care environment that impact quality or workflow and to address them on a daily basis. Through DMS, improvement becomes the work of everyone, every day. The authors of this 2-part series describe their work to develop a DMS. Part 1 describes the background and organizing framework of the program.

Space Transportation System Liftoff Debris Mitigation Process Overview

Science.gov (United States)

Mitchell, Michael; Riley, Christopher

2011-01-01

Liftoff debris is a top risk to the Space Shuttle Vehicle. To manage the Liftoff debris risk, the Space Shuttle Program created a team with in the Propulsion Systems Engineering & Integration Office. The Shutt le Liftoff Debris Team harnesses the Systems Engineering process to i dentify, assess, mitigate, and communicate the Liftoff debris risk. T he Liftoff Debris Team leverages off the technical knowledge and expe rtise of engineering groups across multiple NASA centers to integrate total system solutions. These solutions connect the hardware and ana lyses to identify and characterize debris sources and zones contribut ing to the Liftoff debris risk. The solutions incorporate analyses sp anning: the definition and modeling of natural and induced environmen ts; material characterizations; statistical trending analyses, imager y based trajectory analyses; debris transport analyses, and risk asse ssments. The verification and validation of these analyses are bound by conservative assumptions and anchored by testing and flight data. The Liftoff debris risk mitigation is managed through vigilant collab orative work between the Liftoff Debris Team and Launch Pad Operation s personnel and through the management of requirements, interfaces, r isk documentation, configurations, and technical data. Furthermore, o n day of launch, decision analysis is used to apply the wealth of ana lyses to case specific identified risks. This presentation describes how the Liftoff Debris Team applies Systems Engineering in their proce sses to mitigate risk and improve the safety of the Space Shuttle Veh icle.

Program management system manual

International Nuclear Information System (INIS)

1989-08-01

OCRWM has developed a program management system (PMS) to assist in organizing, planning, directing and controlling the Civilian Radioactive Waste Management Program. A well defined management system is necessary because: (1) the Program is a complex technical undertaking with a large number of participants, (2) the disposal and storage facilities to be developed by the Program must be licensed by the Nuclear Regulatory Commission (NRC) and hence are subject to rigorous quality assurance (QA) requirements, (3) the legislation mandating the Program creates a dichotomy between demanding schedules of performance and a requirement for close and continuous consultation and cooperation with external entities, (4) the various elements of the Program must be managed as parts of an integrated waste management system, (5) the Program has an estimated total system life cycle cost of over $30 billion, and (6) the Program has a unique fiduciary responsibility to the owners and generators of the nuclear waste for controlling costs and minimizing the user fees paid into the Nuclear Waste Fund. This PMS Manual is designed and structured to facilitate strong, effective Program management by providing policies and requirements for organizing, planning, directing and controlling the major Program functions

Ways to integrate document management systems with industrial plant configuration management systems

International Nuclear Information System (INIS)

Munoz, M.

1995-01-01

Based on experience gained from tasks carried out for Almaraz Nuclear Power Plant, this paper describes computer platforms used both at the power plant and in the main offices of the engineering company. Subsequently, a description is given of the procedure followed for the continuous up-dating of plant documentation, in order to maintain consistency with other information stored in data bases in the Operation Management System, Maintenance System, Modification Management System, etc. The work method used for the unitary updating of all information (document images and attributes corresponding to the different data bases), following refuelling procedures is also described. Lastly, the paper describes the functions and the user interface of the system used in the power plant for document management. (Author)

Management Information Systems at CERN

CERN Document Server

Ferguson, J

1986-01-01

The specific areas addressed in the study are 1.Management decision support (data presentation, data base management systems â" DBMS, modeling) 2.Text processing, 3.Electronic communication for management purposes, 4.Office automation, 5.Administrative use of Management Information Systems (MIS) and in particular Administrative Data Processing (ADP).

An overview of social acceptability of nuclear energy

International Nuclear Information System (INIS)

Jamal Khaer Ibrahim

1984-01-01

A comparative evaluation for the role of nuclear energy in the Society is overviewed. Factors pertaining to its social acceptibility such as military conotation, radioactive waste management and nuclear plant safety, to name a few, are also discussed. (author)

Financial arrangements for health systems in low-income countries: an overview of systematic reviews

Science.gov (United States)

Wiysonge, Charles S; Paulsen, Elizabeth; Lewin, Simon; Ciapponi, Agustín; Herrera, Cristian A; Opiyo, Newton; Pantoja, Tomas; Rada, Gabriel; Oxman, Andrew D

2017-01-01

funding (aid), caps and co-payments, pay-for-performance, and provider incentives. Further studies evaluating the effects of these arrangements are needed in low-income countries. Systematic reviews should include all outcomes that are relevant to decision-makers and to people affected by changes in financial arrangements. Financial arrangements for health systems in low-income countries What is the aim of this overview? The aim of this Cochrane Overview is to provide a broad summary of what is known about the effects of financial arrangements for health systems in low-income countries. This overview is based on 15 systematic reviews. Each of these systematic reviews searched for studies that evaluated different types of financial arrangements within the scope of the review question. The reviews included a total of 276 studies. This overview is one of a series of four Cochrane Overviews that evaluate different health system arrangements. Main results What are the effects of different ways of collecting funds to pay for health services? Two reviews looked for studies that addressed this question and found the following. - The effects of changes in user fees on utilisation and equity are uncertain (very low-certainty evidence). - It is uncertain whether aid delivered under Paris Principles (ownership, alignment, harmonisation, managing for results, and mutual accountability) improves health compared to aid delivered without conforming to those principles (very low-certainty evidence). What are the effects of different types of insurance schemes? One systematic review looked for studies that addressed this question and found the following. - Community-based health insurance may increase people's use of services (low-certainty evidence), but the effects on people's health are uncertain. It is uncertain whether social health insurance increases people's use of services (very low-certainty evidence). What are the effects of different ways of paying for health services? One

Commercial Building Energy Asset Score Program Overview and Technical Protocol (Version 1.1)

Energy Technology Data Exchange (ETDEWEB)

Wang, Na; Goel, Supriya; Makhmalbaf, Atefe

2013-08-09