Meaning Making and Psychological Adjustment following Cancer: The Mediating Roles of Growth, Life Meaning, and Restored Just-World Beliefs

Science.gov (United States)

Park, Crystal L.; Edmondson, Donald; Fenster, Juliane R.; Blank, Thomas O.

2008-01-01

Cancer survivors' efforts at meaning making may influence the extent to which they successfully make meaning from their experience (i.e., experience posttraumatic growth, find life meaningful, and restore beliefs in a just world), which may, in turn, influence their psychological adjustment. Previous research regarding both meaning making…

Meaning-making and psychological adjustment to cancer: development of an intervention and pilot results.

Science.gov (United States)

Lee, Virgina; Cohen, S Robin; Edgar, Linda; Laizner, Andrea M; Gagnon, Anita J

2006-11-03

To develop an intervention that uniquely addresses the existential impact of cancer through meaning-making coping strategies and to explore the intervention's impact on psychological adjustment. Descriptive, qualitative approach to develop the intervention; one-group pre- and post-test design to pilot test the intervention. Patients' homes or ambulatory oncology clinics affiliated with a university health center in eastern Canada. 18 participants who were newly diagnosed in the past three months (n = 14), had completed treatment (n = 1), or were facing recurrence (n = 3) of breast (n = 10) or colorectal (n = 8) cancer. Data were collected during interviews using a prototype intervention for trauma patients, and content was analyzed on an ongoing basis to fit the needs of the cancer population. Pretest and post-test questionnaires were administered to determine the intervention's effect. Meaning-making intervention (MMI), patients' background variables, disease- or treatment-related symptoms, and psychological adjustment. The MMI for patients with cancer consisted of as many as four two-hour, individualized sessions and involved the acknowledgment of losses and life threat, the examination of critical past challenges, and plans to stay committed to life goals. At post-test, participants significantly improved in self-esteem and reported a greater sense of security in facing the uncertainty of cancer. Findings suggest that meaning-making coping can be facilitated and lead to positive psychological outcomes following a cancer diagnosis. The MMI offers a potentially effective and structured approach to address and monitor cancer-related existential issues. Findings are useful for designing future randomized, controlled trials.

The analysis of irreversibility, uncertainty and dynamic technical inefficiency on the investment decision in the Spanish olive sector

NARCIS (Netherlands)

Lambarraa, Fatima; Stefanou, Spiro; Gil, José M.

2016-01-01

This study addresses irreversible investment decision-making in the context of uncertainty when allowing for inefficiency to be transmitted over time. Both irreversibility and persistence in technical inefficiency can lead to sluggish adjustment of quasi-fixed factors of production. The context

Non-technical factors impacting on the decision making processes in environmental remediation. Influences on the decision making process such as cost, planned land use and public perception

International Nuclear Information System (INIS)

2002-04-01

The IAEA attaches great importance to the dissemination of information that can assist Member States with the development, implementation, maintenance and continuous improvement of systems, programmes and activities that support the nuclear fuel cycle and nuclear applications, including the legacy of past practices and accidents. In response to this, the IAEA has initiated a comprehensive programme of work covering all aspects of environmental remediation: factors important for formulating a strategy for environmental remediation; site characterisation techniques and strategies; assessment of remediation technologies; assessment of technical options for cleanup of contaminated media; post-restoration compliance monitoring; assessment of the costs of remediation measures; remediation of low-level disperse radioactive contaminations in the environment. While this project mainly focus on technological aspects, non-technical factors will be influencing the decision making process in remediation decisively. Often their influence is only tacitly accepted and not explicitly acknowledged by the responsible decision makers. This makes it difficult to trace the decision making process in the event that it has to be revisited. The present publication attempts to make these factors explicit and to present methods to include them consciously into the decision making process

Technical requirements on knowledge base and instrumentation system for decision making in plant operation and maintenance

International Nuclear Information System (INIS)

Kitamura, Masaharu; Yoshikawa, Shinji; Hasegawa, Makoto

1998-03-01

A series of technical surveys and studies are described in this report to examine and identify technical requirements to be posed on knowledge base and instrumentation system as the fundamental in high reliability computational decision making in operation and maintenance of nuclear power plants. Monitoring and diagnosis are focused as the important tasks among the operation/maintenance-related tasks. A concrete monitoring and diagnosis system configuration has been proposed consisting of distributed symptom database and of on-demand measurement subsystem. An prototype of the proposed system configuration has been successfully verified. (author)

Towards optimal use of available technical resources for regulatory purposes. The Syrian experience

International Nuclear Information System (INIS)

Shweikani, R.; Suman, H.; Othman, I.

2007-01-01

The Atomic Energy commission of Syria (AECS) is nominated by Syrian legislation as the regulatory authority in respect of radiation protection and safety and security of radioactive sources. In addition AECS is providing a wide range of Technical Services (TS) through its various departments. In this paper, the cooperation and coordination between the regulatory authority and the providers of technical services in Syria are described. The adjustment of the regulatory programme as to make maximal use of the available technical resources is presented. It was shown that this relationship does not jeopardize the effective independency of the regulatory authority which is maintained by keeping the regulatory decisions based on pure regulatory considerations. (author)

Optimization of protection as a decision-making tool, for radioactive waste disposal

International Nuclear Information System (INIS)

Bragg, K.

1988-01-01

Politically-based considerations and processes including public perception and confidence appear to be the basis for real decisions affecting waste management activities such as siting, construction, operation and monitoring. Optimization of radiation protection is not a useful general tool for waste disposal decision making. Optimization of radiation protection is essentially a technical tool which can, under appropriate circumstances, provide a clear preference among major management options. The level of discrimination will be case-specific but, in general, only fairly coarse differences can be discriminated. The preferences determined by optimization of protection tend not to be related to the final choices made for disposal of radioactive wastes. Tools such as multi-attribute analysis are very useful as they provide a convenient means to rationalize the real decisions and give them some air of technical respectability. They do not, however, provide the primary basis for the decisions. Technical experts must develop an awareness of the non-technical approach to decision making an attempt to adjust their method of analyses and their presentation of information to encourage dialogue rather than confrontation. Simple expressions of technical information will be needed and the use of analogues should prove helpful

Adjusted permutation method for multiple attribute decision making with meta-heuristic solution approaches

Directory of Open Access Journals (Sweden)

Hossein Karimi

2011-04-01

Full Text Available The permutation method of multiple attribute decision making has two significant deficiencies: high computational time and wrong priority output in some problem instances. In this paper, a novel permutation method called adjusted permutation method (APM is proposed to compensate deficiencies of conventional permutation method. We propose Tabu search (TS and particle swarm optimization (PSO to find suitable solutions at a reasonable computational time for large problem instances. The proposed method is examined using some numerical examples to evaluate the performance of the proposed method. The preliminary results show that both approaches provide competent solutions in relatively reasonable amounts of time while TS performs better to solve APM.

26 CFR 1.754-1 - Time and manner of making election to adjust basis of partnership property.

Science.gov (United States)

2010-04-01

... general. A partnership having an election in effect under this section may revoke such election with the... required to be filed. A partnership which wishes to revoke such an election shall file with the district... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Time and manner of making election to adjust...

Predictors of employer satisfaction: technical and non-technical skills.

Science.gov (United States)

Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

2012-01-01

Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction.

The left inferior frontal gyrus is involved in adjusting response bias during a perceptual decision-making task.

Science.gov (United States)

Reckless, Greg E; Ousdal, Olga T; Server, Andres; Walter, Henrik; Andreassen, Ole A; Jensen, Jimmy

2014-05-01

Changing the way we make decisions from one environment to another allows us to maintain optimal decision-making. One way decision-making may change is how biased one is toward one option or another. Identifying the regions of the brain that underlie the change in bias will allow for a better understanding of flexible decision-making. An event-related, perceptual decision-making task where participants had to detect a picture of an animal amongst distractors was used during functional magnetic resonance imaging. Positive and negative financial motivation were used to affect a change in response bias, and changes in decision-making behavior were quantified using signal detection theory. Response bias became relatively more liberal during both positive and negative motivated trials compared to neutral trials. For both motivational conditions, the larger the liberal shift in bias, the greater the left inferior frontal gyrus (IFG) activity. There was no relationship between individuals' belief that they used a different strategy and their actual change in response bias. The present findings suggest that the left IFG plays a role in adjusting response bias across different decision environments. This suggests a potential role for the left IFG in flexible decision-making.

The socio-technical system and nuclear safety

International Nuclear Information System (INIS)

Stefanescu, Petre; Mihailescu, Nicolae; Dragusin, Octavian

1999-01-01

In the field of nuclear safety there have been defined notions like 'technical factors' and 'human factors'. The technical factors depend on designing and manufacturing of components/equipment, actually depend on the people's work. The study of human factors consists in analyzing and recommending the terms that allow an individual to be a reliable and safety agent. Accordingly, he/she is placed in working conditions corresponding to human abilities, associating the means of three levels: - designing, i.e. the action upon the technical system and upon work organization; - correction, i.e. the action upon the evolution of the technical system and organizing; - formation/training, i.e. action upon operators. The paper presents a characterization of the socio-technical system and on this basis discusses the issue of individual adjustment to the socio-technical system and reciprocally, the issue of the socio-technical system adjustment to the individual. Concepts as: ergonomics, physical medium, man/machine interface and support of the operator, man/machine task sharing, the work organizing are put in relation with the central subject, the nuclear safety

Perfecting 'a sharper image': telescope-making and the dissemination of technical knowledge, 1700-1820

Science.gov (United States)

Cameron, Gary L.

2012-07-01

Telescopes, reflecting telescopes in particular, underwent considerable development during the eighteenth century. Two classes of telescope maker, the for-profit artisan and the amateur 'gentleman-philosopher,' learned techniques of optical fabrication and testing and produced usable astronomical instruments. One means of disseminating technical knowledge was via the book. The year 1738 saw the publication of a highly-influential book, Robert Smith's A Compleat System of Opticks, a work that included detailed information on telescope-making. It was this book that helped spark the astronomical career of William Herschel, and with Smith's information Herschel produced large reflecting telescopes of exquisite quality. However, artisan-opticians, even the renowned James Short, appear to have cut corners on a portion of their production, thus permitting the sale of some instruments of inferior quality. The reasons for this were clearly economical in nature: artisans depending on telescope sales to earn a living simply could not afford the time required for perfection. The mere presence of written works disseminating technical

[Do laymen understand information about hospital quality? An empirical verification using risk-adjusted mortality rates as an example].

Science.gov (United States)

Sander, Uwe; Kolb, Benjamin; Taheri, Fatemeh; Patzelt, Christiane; Emmert, Martin

2017-11-01

The effect of public reporting to improve quality in healthcare is reduced by the limited intelligibility of information about the quality of healthcare providers. This may result in worse health-related choices especially for older people and those with lower levels of education. There is, as yet, little information as to whether laymen understand the concepts behind quality comparisons and if this comprehension is correlated with hospital choices. An instrument with 20 items was developed to analyze the intelligibility of five technical terms which were used in German hospital report cards to explain risk-adjusted death rates. Two online presentations of risk-adjusted death rates for five hospitals in the style of hospital report cards were developed. An online survey of 353 volunteers tested the comprehension of the risk-adjusted mortality rates and included an experimental hospital choice. The intelligibility of five technical terms was tested: risk-adjusted, actual and expected death rate, reference range and national average. The percentages of correct answers for the five technical terms were in the range of 75.0-60.2%. Between 23.8% and 5.1% of the respondents were not able to answer the question about the technical term itself. The least comprehensible technical terms were "risk-adjusted death rate" and "reference range". The intelligibility of the 20 items that were used to test the comprehension of the risk-adjusted mortality was between 89.5% and 14.2%. The two items that proved to be least comprehensible were related to the technical terms "risk-adjusted death rate" and "reference range". For all five technical terms it was found that a better comprehension correlated significantly with better hospital choices. We found a better than average intelligibility for the technical terms "actual and expected death rate" and for "national average". The least understandable were "risk-adjusted death rate" and "reference range". Since the self

Border adjustment with taxes or allowances to level the price of carbon

DEFF Research Database (Denmark)

Andersen, Mikael Skou

2018-01-01

was created at the initiative of the World Bank and the International Monetary Fund. Over the past five years, the share of global CO2 emissions subject to carbon pricing via either taxes or allowances has tripled from four to twelve per cent. In anticipation of a widening gap between countries, the scope...... for such adjustment under its exemption mechanisms and when all other options have been exhausted. As a highly sensitive measure, not only the complex technical and legal questions deserve attention; attention must also be paid as to how to make the best diplomacy of it within the arsenal of climate change mitigation...

Making an Adjustable C-Clamp. Kit No. 603. Instructor's Manual [and] Student Learning Activity Manual. [Revised.] T & I--Metalwork.

Science.gov (United States)

White, Jim; Alexander, Larry

This student activity kit consists of a programmed, self-instructional learning guide and an accompanying instructor's manual for use in teaching trade and industrial education students how to make an adjustable C-clamp. The student guide contains step-by-step instructions in the following areas: basic layout principles; use of a hack saw, file,…

75 FR 13680 - Commutation of Sentence: Technical Change

Science.gov (United States)

2010-03-23

... Sentence: Technical Change AGENCY: Bureau of Prisons, Justice. ACTION: Interim rule. SUMMARY: This document makes a minor technical change to the Bureau of Prisons (Bureau) regulations on sentence commutation to.... Commutation of Sentence: Technical Change This document makes a minor technical change to the Bureau...

A linguistic approach to solving of the problem of technological adjustment of combines

Directory of Open Access Journals (Sweden)

Lyudmila V. Borisova

2017-06-01

Full Text Available Introduction: The article deals with a linguistic approach to the technological adjustment of difficult harvesters in field conditions. The short characteristic of subject domain is provided. The place of the task of adjustment of the combine harvester working bodies in harvesting is considered. Various groups of signs of the considered task are allocated: external signs of violation of quality of work, regulated parameters of the machine, and parameters of technical condition. The numerical data characterizing interrelations between external signs and parameters of the machine are provided. Materials and Methods: A combine harvester is the difficult dynamic system functioning under constantly changing external conditions. This fact imposes characteristics on the used methods of technological adjustment. Quantitative and qualitative information is used to control harvesting. Availability of different types of uncertainty in considering semantic spaces of factors of the external environment and parameters of the machine allows offering the method of technological adjustment based on an indistinct logical conclusion for the solution of the task. Results: As the analysis result, the decision making methodology for indistinct environment conditions is adapted for the studied subject domain. The generalized scheme of indistinct management of process is offered to technological adjustment of the machine. Models of the studied semantic spaces are considered. Feasibility of use of deductive and inductive conclusions of decisions for various tasks of preliminary setup and adjustment of technological adjustments is shown. The formal and logical scheme of the decision making process based on indistinct expert knowledge is offered. The scheme includes the main stages of the task solution: fazzifikation, composition and defazzifikation. The question of the quantitative assessment of expert knowledge coordination is considered. The examples of the formulation

Assessing Nurse Anaesthetists' Non-Technical Skills in the operating room.

Science.gov (United States)

Lyk-Jensen, H T; Jepsen, R M H G; Spanager, L; Dieckmann, P; Østergaard, D

2014-08-01

Incident reporting and fieldwork in operating rooms have shown that some of the errors that arise in anaesthesia relate to inadequate use of non-technical skills. To provide a tool for training and feedback on nurse anaesthetists' non-technical skills, this study aimed to adapt the Anaesthetists' Non-Technical Skills (ANTS) as a behavioural marker system for the formative assessment of nurse anaesthetists' non-technical skills in the operating room. A qualitative approach with focus group interviews was used to identify the non-technical skills of nurse anaesthetists in the operating room. The interview data were transcribed verbatim. Directed content analysis was used to code and sort data deductively into the ANTS categories: task management, team working, situation awareness and decision making. The prototype named Nurse Anaesthetists' Non-Technical Skills (N-ANTS) was presented and discussed in a group of subject matter experts to ensure face validity. The N-ANTS system consists of the same four categories as ANTS and 15 underlying elements. Three to five good and poor behavioural markers for each element were identified. The headings and definitions of the categories and elements were adjusted to encompass the behavioural markers in N-ANTS. The differences that emerged mainly reflected statements regarding the establishment of role, competence, and task delegation. A behavioural marker system, N-ANTS, for nurse anaesthetists was adapted from a behavioural marker system, ANTS, for anaesthesiologists. © 2014 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Risk-adjusted capitation: recent experiences in The Netherlands.

Science.gov (United States)

van de Ven, W P; van Vliet, R C; van Barneveld, E M; Lamers, L M

1994-01-01

The market-oriented health care reforms taking place in the Netherlands show a clear resemblance to the proposals for managed competition in U.S. health care. In both countries good risk adjustment mechanisms that prevent cream skimming--that is, that prevent plans from selecting the best health risks--are critical to the success of the reforms. In this paper we present an overview of the Dutch reforms and of our research concerning risk-adjusted capitation payments. Although we are optimistic about the technical possibilities for solving the problem of cream skimming, the implementation of good risk-adjusted capitation is a long-term challenge.

75 FR 33989 - Export Administration Regulations: Technical Corrections

Science.gov (United States)

2010-06-16

... 0694-AE69 Export Administration Regulations: Technical Corrections AGENCY: Bureau of Industry and... section of Export Control Classification Number 2B001 and the other is in the Technical Note on Adjusted... language regarding certain performance criteria of turning machines covered by Export Control...

Technical Writing Tips

Science.gov (United States)

Kennedy, Patrick M.

2004-01-01

The main reason engineers, technicians, and programmers write poor technical documents is because they have had little training or experience in that area. This article addresses some of the basics that students can use to master technical writing tasks. The article covers the most common problems writers make and offers suggestions for improving…

Mitral valve repair with adjustable ring annuloplasty.

Science.gov (United States)

Andreas, Martin; Haberl, Thomas; Paul Werner, Paul Werner; Guri, Jani; Kocher, Alfred; Hamza, Ouafa; Podesser, Bruno; Laufer, Guenther

2018-02-28

We demonstrate the technical aspects of a novel adjustable mitral ring. This new ring was implanted in a female landrace pig, for training and educational purposes. It can be adjusted independently in the P1, P2 and P3 segments, if required, to treat  recurrent mitral regurgitation, and this is a key difference to comparable devices. The first-in-man implantation is anticipated in the near future. © The Author 2016. Published by MMCTS on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

The missing link in an international framework for carbon pricing: border adjustment with taxes or allowances

DEFF Research Database (Denmark)

Andersen, Mikael Skou

2017-01-01

was created at the initiative of the World Bank and the International Monetary Fund. Over the past five years the share of global CO2 emissions subject to carbon pricing via either taxes or allowances have tripled, from four to twelve per cent. In anticipation of a widening gap between countries the scope...... allow for such adjustment under its exemption mechanisms and when all other options have been exhausted. As a highly sensitive measure, not only the complex technical and legal questions deserve attention, but also how to make the best diplomacy of it within the arsenal of climate change mitigation...

Correlates of non-technical skills in surgery: a prospective study.

Science.gov (United States)

Gillespie, Brigid M; Harbeck, Emma; Kang, Evelyn; Steel, Catherine; Fairweather, Nicole; Chaboyer, Wendy

2017-01-30

Communication and teamwork failures have frequently been identified as the root cause of adverse events and complications in surgery. Few studies have examined contextual factors that influence teams' non-technical skills (NTS) in surgery. The purpose of this prospective study was to identify and describe correlates of NTS. We assessed NTS of teams and professional role at 2 hospitals using the revised 23-item Non-TECHnical Skills (NOTECHS) and its subscales (communication, situational awareness, team skills, leadership and decision-making). Over 6 months, 2 trained observers evaluated teams' NTS using a structured form. Interobserver agreement across hospitals ranged from 86% to 95%. Multiple regression models were developed to describe associations between operative time, team membership, miscommunications, interruptions, and total NOTECHS and subscale scores. We observed 161 surgical procedures across 8 teams. The total amount of explained variance in NOTECHS and its 5 subscales ranged from 14% (adjusted R 2 0.12, p<0.001) to 24% (adjusted R 2 0.22, p<0.001). In all models, inverse relationships between the total number of miscommunications and total number of interruptions and teams' NTS were observed. Miscommunications and interruptions impact on team NTS performance. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Trade Adjustment Assistance for Firms: Economic, Program, and Policy Issues

National Research Council Canada - National Science Library

Hornbeck, J. F

2007-01-01

.... This report focuses on the trade adjustment assistance (TAA) program for firms, which provides technical assistance to help them develop strategies to remain competitive in the changing international economy...

Technical Assistance Needs Assessments (TANAs)

Science.gov (United States)

The Technical Assistance Needs Assessment (TANA) is a process to identify whether a community requires additional support from EPA in order to understand technical information and have meaningful participation in the Superfund decision-making process.

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

The fluctuations of China’s energy intensity: Biased technical change

International Nuclear Information System (INIS)

Wang, Ce; Liao, Hua; Pan, Su-Yan; Zhao, Lu-Tao; Wei, Yi-Ming

2014-01-01

Highlights: • Biased technical change is considered in the adjusting the input–output tables. • The level of biased technical change is determined by TFP and energy efficiency. • The increase in energy intensity was mostly attributed to the structural change. • The changes in the production technology actually decreased the energy intensity. • The decomposition results are sensitive to the level of biased technical change. - Abstract: The fluctuations of China’s energy intensity have attracted the attention of many scholars, but fewer studies consider the data quality of official input–output tables. This paper conducts a decomposition model by using the Divisia method based on the input–output tables. Because of the problems with input–output tables and price deflators, we first produce constant prices to deflate the input–output tables. And then we consider different levels of biased technical change for different sectors in the adjusting the input–output table. Finally, we use RAS technique to adjust input–output matrix. Then the decomposition model is employed to empirically analyze the change of China’s energy intensity. We compare the decomposition results with and without biased technical change and do sensitive analysis on the level of biased technical change. The decomposition results are that during 2002–2007, the energy intensity of coal and electricity increased, the changes were mostly attributed to the structural change and the contribution was 594.08%, 73.88%, respectively; as for crude oil and refined oil, the energy intensity decreased, the changes were mostly attributed to the changes in the production technology and the contribution was 978.89%, 246.95%, respectively. And the results of sensitive analysis shows that 1% variation of the level of biased technical change will cause at most 0.6% change of decomposition results. Therefore, we can draw our conclusions: compared to the decomposition without biased technical

Technical and tactical training team «Helios» Kharkiv in the first round of 23 Ukrainian football championship in the premier league 2013–2014

Directory of Open Access Journals (Sweden)

Rebaz Sleman

2014-10-01

Full Text Available Purpose: to define the characteristics of the model command of technical and tactical training team participating in the Ukrainian Premier League First League. Material and Methods: the research was conducted using the method of peer review. The experts were involved 5 specialists football. Results: the mean values for the analyzed variables in 10 games. The various technical and tactical actions and their percentage in the overall structure of the game team statistics for 20 games, as well as some indicators of team play "Helios" Kharkov. Conclusions: the obtained quantitative and qualitative indicators (coefficient of marriage as a team on the technical and tactical actions, as well as separately for each technical and tactical reception. The performances allow you to make adjustments to the training process this command to improve sportsmanship.

Does Fall History Influence Residential Adjustments?

Science.gov (United States)

Leland, Natalie; Porell, Frank; Murphy, Susan L.

2011-01-01

Purpose of the study: To determine whether reported falls at baseline are associated with an older adult's decision to make a residential adjustment (RA) and the type of adjustment made in the subsequent 2 years. Design and Methods: Observations (n = 25,036) were from the Health and Retirement Study, a nationally representative sample of…

Making yourself indispensable.

Science.gov (United States)

Zenger, John H; Folkman, Joseph R; Edinger, Scott K

2011-10-01

Peter Drucker and other leadership thinkers have long argued that leaders should focus on strengthening their strengths. How should they do that? Improving on a weakness is pretty easy and straight forward: You can make measurable progress by honing and practicing basic techniques. But developing a strength is a different matter, because simply doing more of what you're good at will yield only incremental improvements. If you are strong technically, becoming even more of a technical expert won't make you a dramatically better leader. If, however, you use what the authors call "nonlinear development"--similar to an athlete's cross-training--you can achieve exponential results. Your technical expertise will become more powerful if, for instance, you build on your communication skills, enabling you to explain technical problems both more broadly and more effectively. The authors, all from the leadership development consultancy Zenger Folkman, present a step-by-step process by which developing leaders can identify their strengths (through either a formal or an informal 360-degree evaluation), select appropriate complementary skills (the article identifies up to a dozen for each core strength), and develop those skills to dramatically improve their strengths--making themselves uniquely valuable to their companies.

Cost per quality-adjusted life year and disability-adjusted life years: the need for a new paradigm.

Science.gov (United States)

Bevan, Gwyn; Hollinghurst, Sandra

2003-08-01

Two different paradigms have been proposed for setting priorities for access to healthcare: cost per quality-adjusted life year based on interventions, and disability-adjusted life years based on the burden of disease in a population. These formal paradigms make explicit the assumptions made implicitly every day in delivering and hence rationing access to healthcare. This paper outlines each paradigm's methodological problems and argues that each paradigm is incomplete in terms of providing the information necessary for making budgetary decisions on healthcare. It argues that a scientific revolution is required to create a new paradigm by combining the strengths of each.

Research on technical trading and market efficiency : a trader's perspective

OpenAIRE

Vico-Ivanina, Julianna V.

2012-01-01

Research on the predictive power of technical analysis is a matter of controversy. The objective of this thesis is to look at the empirical research done on technical trading and see how the results can be used from a trader’s perspective. Some results provide strong support for the technical trading and propose useful trading strategies. However, there are some limitations regarding transaction costs, risk adjustment, and statistical tests. Technical research has developed new methodology ap...

10 CFR 765.12 - Inflation index adjustment procedures.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Inflation index adjustment procedures. 765.12 Section 765... THORIUM PROCESSING SITES Reimbursement Criteria § 765.12 Inflation index adjustment procedures. (a) The... § 765.2(i) of this rule) shall be adjusted for inflation as provided by this section. (b) To make...

Normative adjustments to the D-KEFS trail making test: corrections for education and vocabulary level.

Science.gov (United States)

Fine, Eric M; Delis, Dean C; Holdnack, James

2011-11-01

The Delis-Kaplan Executive Function System (D-KEFS) Trail Making Test (TMT), a modification of the original TMT, was created to isolate set-shifting (Letter-Number Switching) from other component skills. This was accomplished by including four baseline conditions (Visual Scanning, Number Sequencing, Letter Sequencing, and Motor Speed) and by placing equal numbers of stimuli in the three sequencing conditions. Given that some studies with the original TMT demonstrated a significant effect of education and intellectual functioning on performance, we utilized the D-KEFS national standardization sample to examine the effects of education and vocabulary level-i.e., Vocabulary subtest from the Wechsler Abbreviated Scale of Intelligence (WASI)-on the D-KEFS TMT. The results indicate a significant effect of these variables on each D-KEFS TMT condition. Normative tables for education- and vocabulary-adjusted scaled scores based on the database from the D-KEFS national normative study were generated.

The spelling competence for the training of the skilled worker in professional technical education

Directory of Open Access Journals (Sweden)

Fidel Marimón Ramírez

2017-09-01

Full Text Available This research had as purpose to elaborate a system of activities for the development of the orthographic competition in the students of masonry of the Technical and Professional Education. It is extremely important in the training of skilled workers since it has presented problems in order to guarantee the effectiveness of the teaching-learning process, by addressing the contents with an end in themselves and not in an integrated and contextualized way; given to a large extent by the lack of knowledge of the new approaches that are linked to the multiple communicative possibilities, which requires a study capable of making the necessary adjustments or redesigns that fit the needs of students to improve orthographic problems. In the investigative process were used, methods, techniques and procedures of the theoretical level, of the empirical level and statistical-mathematical, such as the system approach, modeling, analysis and synthesis, observation, surveys, documentary analysis and descriptive statistics the percentage analysis. The evaluation of specialists and the pre-experiment carried out make it possible to recommend the system of activities as a valid option for the development of orthographic competence in first-year masonry students in Technical and Professional Education.

Suboptimal decision making by children with ADHD in the face of risk: Poor risk adjustment and delay aversion rather than general proneness to taking risks.

Science.gov (United States)

Sørensen, Lin; Sonuga-Barke, Edmund; Eichele, Heike; van Wageningen, Heidi; Wollschlaeger, Daniel; Plessen, Kerstin Jessica

2017-02-01

Suboptimal decision making in the face of risk (DMR) in children with attention-deficit hyperactivity disorder (ADHD) may be mediated by deficits in a number of different neuropsychological processes. We investigated DMR in children with ADHD using the Cambridge Gambling Task (CGT) to distinguish difficulties in adjusting to changing probabilities of choice outcomes (so-called risk adjustment) from general risk proneness, and to distinguish these 2 processes from delay aversion (the tendency to choose the least delayed option) and impairments in the ability to reflect on choice options. Based on previous research, we predicted that suboptimal performance on this task in children with ADHD would be primarily relate to problems with risk adjustment and delay aversion rather than general risk proneness. Drug naïve children with ADHD (n = 36), 8 to 12 years, and an age-matched group of typically developing children (n = 34) performed the CGT. As predicted, children with ADHD were not more prone to making risky choices (i.e., risk proneness). However, they had difficulty adjusting to changing risk levels and were more delay aversive-with these 2 effects being correlated. Our findings add to the growing body of evidence that children with ADHD do not favor risk taking per se when performing gambling tasks, but rather may lack the cognitive skills or motivational style to appraise changing patterns of risk effectively. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Sustainable urban regime adjustments

DEFF Research Database (Denmark)

Quitzau, Maj-Britt; Jensen, Jens Stissing; Elle, Morten

2013-01-01

The endogenous agency that urban governments increasingly portray by making conscious and planned efforts to adjust the regimes they operate within is currently not well captured in transition studies. There is a need to acknowledge the ambiguity of regime enactment at the urban scale. This direc...

Adjustment of legally binding local plans

DEFF Research Database (Denmark)

Hvingel, Line Træholt; Aunsborg, Christian; Christensen, Finn Kjær

2012-01-01

Traditionally, and by law, new urban areas in Denmark are regulated and planned through legally binding local plans. Recently a tendency has occurred: The municipalities make the legally binding local plans quite open for future adjustment, and they are using a substantial amount of ‘empowerment ...... the considerations of legal rights, the extend of the legal use of empowerment provisions and the combination of the use of legal binding local plans and other legal instruments such as easements and sales agreements.......Traditionally, and by law, new urban areas in Denmark are regulated and planned through legally binding local plans. Recently a tendency has occurred: The municipalities make the legally binding local plans quite open for future adjustment, and they are using a substantial amount of ‘empowerment...... provisions’ which empower the municipalities to later ruling. This way of making plans postpones the actual regulation of an area (i.e. the planning permission) making it an individual ruling for instance at the application of building permits. Case studies show examples of this way of regulating an area...

A Method to Design a Multi-Player Educational Scenario to Make Interdisciplinary Teams Experiment Risk Management Situation in a Digital Collaborative Learning Game: A Case of Study in Healthcare

Directory of Open Access Journals (Sweden)

Catherine Pons Lelardeux

2018-05-01

Full Text Available In recent years, there has been an increasing interest for collaborative training in risk management. One of the critical point is to create educational and entirely controlled training environments that support industrial companies (in aviation, healthcare, nuclear… or hospitals to train (future or not professionals. The aim is to improve their teamwork performance making them understand the importance applying or adjusting safety recommendations. In this article, we present a method to design multi-player educational scenario for risk management in a socio-technical and dynamic context. The socio-technical situations focused in this article involve non-technical skills such as teamwork, communication, leadership, decision-making and situation awareness. The method presented here has been used to design as well regular situations as well as critical situations in which deficiencies already exist or mistakes can be freely made and fixed by the team in a controlled digital environment.

Dynamic technical inefficiency and industrial concentration in the Indonesian food and beverages industry

NARCIS (Netherlands)

Setiawan, Maman; Oude Lansink, Alfons G.J.M.

2018-01-01

Purpose: The purpose of this paper is to investigate the relation between industrial concentration and technical inefficiency in the Indonesian food and beverages industry using a dynamic performance measure (dynamic technical inefficiency) that accounts for the presence of adjustment costs.

General Adjustment Influence Factor of Malaysian Construction Expatriates Executives Abroad

Directory of Open Access Journals (Sweden)

Zainol Halmi

2016-01-01

Full Text Available The success of Malaysian construction companies creates an opportunity to explore abroad. Past studies have shown that the difficulty of expatriates in adjusting to a new environment is the main aspect that leads to failure of assignments. The success in implementing an overseas assignment does not solely depend on an expatriate’s technical expertise. The adjustment issues such as the interaction with the host nationals, and adaptability to the host country’s culture also exert influence on the assignment. The research was conducted to identify the influence of executive expatriate general adjustment on assignment in host countries. The objective of the study was to identify adjustment influence factors relating to general adjustment abroad. Questionnaires were sent to Malaysian expatriate executives. Sixty four Malaysian expatriate executives from Malaysian construction companies overseas were involved in this study. The findings show interaction, social and living environment influences their adjustment during expatriation. Pre-departure training preparation aspects for expatriates is a good step before their departure to host countries.

Decision making in urological surgery.

Science.gov (United States)

Abboudi, Hamid; Ahmed, Kamran; Normahani, Pasha; Abboudi, May; Kirby, Roger; Challacombe, Ben; Khan, Mohammed Shamim; Dasgupta, Prokar

2012-06-01

Non-technical skills are important behavioural aspects that a urologist must be fully competent at to minimise harm to patients. The majority of surgical errors are now known to be due to errors in judgment and decision making as opposed to the technical aspects of the craft. The authors reviewed the published literature regarding decision-making theory and in practice related to urology as well as the current tools available to assess decision-making skills. Limitations include limited number of studies, and the available studies are of low quality. Decision making is the psychological process of choosing between alternative courses of action. In the surgical environment, this can often be a complex balance of benefit and risk within a variable time frame and dynamic setting. In recent years, the emphasis of new surgical curriculums has shifted towards non-technical surgical skills; however, the assessment tools in place are far from objective, reliable and valid. Surgical simulators and video-assisted questionnaires are useful methods for appraisal of trainees. Well-designed, robust and validated tools need to be implemented in training and assessment of decision-making skills in urology. Patient safety can only be ensured when safe and effective decisions are made.

Do Older Siblings Make a Difference? The Effects of Older Sibling Support and Older Sibling Adjustment on the Adjustment of Socially Disadvantaged Adolescents.

Science.gov (United States)

Widmer, Eric D.; Weiss, Christopher C.

2000-01-01

Examined role of support from a well-adjusted older sibling for positive adjustment of disadvantaged inner-city adolescents. Found that sibling support was nonsignificantly related to delinquency, academic success, and mental health for younger siblings. Only when accompanied by a positive image of their older sibling was support associated with…

Developing e-banking services for rural India: making use of socio-technical prototypes

DEFF Research Database (Denmark)

Dittrich, Yvonne; Vaidyanathan, Lakshmi; Gonsalves, Timothy A

2017-01-01

an experience report based on systematic debriefing of involved project leaders and initiators, triangulated with additional documentation. The concept of Socio-Technical Prototype is developed and used to show how to mitigate the challenges of ICT based banking service provision for socially constrained...... communities. The concept of Socio-Technical Prototype extends the notion of prototypes, as it implies a full functioning implementation of the service including all relevant stakeholders. In order to not only prototype end-user functionality but also the interaction of the solution with the specific social......, technical and physical environment. The implications for software engineering in the development of such large-scale prototypes and pilots are outlined....

Development of TRITN : In-house technical information network of Technical Research Institute in The Chugoku Electric Power Co., Inc.

Science.gov (United States)

Ebara, Hisao

With the increase in information amount, progress in information network, diversified technology and change in in-house organization the Technical Research Institute has necessitated to shift the conventional technical database processing by use of personal computers into new system promised for future use. It enables to; provide classification system which meets the needs of the institute; execute distributed processing using workstations; make the low cost processing using commercial softwares; make networks using LAN, WAN personal computer communication, and provide primary materials (text data) on facsimiles using optical disks. Such features are those of technical information database system "TRITN" which is available to any persons and at any time. This paper describes how TRITN was developed and the system outline.

Discussion on technical intelligence of nuclear power industry

International Nuclear Information System (INIS)

Chen Ming

2010-01-01

The very Paper introduces the contemporary challenges faced by the profession of technical intelligence on nuclear power, and expatiates the functions of technical intelligence such as sources of experience feedback, background information and supports for decision-making. Afterwards, the Paper explains characteristics of technical intelligence and its working methods, i.e., quantitative changes to reach qualitative changes, approve-negate-approve and oppositeness unity of comprehensiveness and limitation of technical intelligence. (authors)

The Digital technical documentation handbook

CERN Document Server

Schultz, Susan I; Kavanagh, Frank X; Morse, Marjorie J

1993-01-01

The Digital Technical Documentation Handbook describes the process of developing and producing technical user information at Digital Equipment Corporation. * Discusses techniques for making user information _more effective * Covers the draft and reviewprocess, the production and distribution of printed and electronic media, archiving, indexing, testing for usability, and many other topics * Provides quality assurance checklists, contains a glossary and a bibliography of resources for technicalcommunicators

Autonomy, evidence and intuition: nurses and decision-making.

Science.gov (United States)

Traynor, Michael; Boland, Maggie; Buus, Niels

2010-07-01

This paper is a report of a study conducted to examine how nurses represent professional clinical decision-making processes, and to determine what light Jamous and Peloille's 'Indeterminacy/Technicality ratio' concept can shed on these representations. Classic definitions of professional work feature autonomy of decision-making and control over the field of work. Sociologists Jamous and Peloille have described professional work as being high in 'indeterminacy' (the use of tacit judgements) relative to technicality (activity able to be codified). The rise of the evidence-based practice movement has been seen as increasing the realm of technical decision-making in healthcare, and it is relevant to analyse nurses' professional discourse and study how they respond to this increase. Three focus groups with qualified nurses attending post-qualifying courses at a London university were held in 2008. Participants were asked to talk about influences on their decision-making. The discussions were tape-recorded, transcribed and subjected to discourse analysis. Participants described their decision-making as influenced by both indeterminate and technical features. They acknowledged useful influences from both domains, but pointed to their personal 'experience' as the final arbiter of decision-making. Their accounts of decision-making created a sense of professional autonomy while at the same time protecting it against external critique. Pre- and post-registration nurse education could encourage robust discussion of the definition and roles of 'irrational' aspects of decision-making and how these might be understood as components of credible professional practice.

Environment-adjusted total-factor energy efficiency of Taiwan's service sectors

International Nuclear Information System (INIS)

Fang, Chin-Yi; Hu, Jin-Li; Lou, Tze-Kai

2013-01-01

This study computes the pure technical efficiency (PTE) and energy-saving target of Taiwan's service sectors during 2001–2008 by using the input-oriented data envelopment analysis (DEA) approach with the assumption of a variable returns-to-scale (VRS) situation. This paper further investigates the effects of industry characteristics on the energy-saving target by applying the four-stage DEA proposed by Fried et al. (1999). We also calculate the pre-adjusted and environment-adjusted total-factor energy efficiency (TFEE) scores in these service sectors. There are three inputs (labor, capital stock, and energy consumption) and a single output (real GDP) in the DEA model. The most energy efficient service sector is finance, insurance and real estate, which has an average TFEE of 0.994 and an environment-adjusted TFEE (EATFEE) of 0.807. The study utilizes the panel-data, random-effects Tobit regression model with the energy-saving target (EST) as the dependent variable. Those service industries with a larger GDP output have greater excess use of energy. The capital–labor ratio has a significantly positive effect while the time trend variable has a significantly negative impact on the EST, suggesting that future new capital investment should also be accompanied with energy-saving technology in the service sectors. - Highlights: • The technical efficiency and energy-saving target of service sectors are assessed. • The pre-adjusted and environment-adjusted total-factor energy efficiency scores in services are assessed. • The industrial characteristic differences are examined by the panel-data, random-effects Tobit regression model. • Labor, capital, and energy and an output (GDP) are included in the DEA model. • Future new capital investment should also be accompanied with energy-saving technology in the service sectors

Making reasonable and achievable adjustments: the contributions of learning disability liaison nurses in 'Getting it right' for people with learning disabilities receiving general hospitals care.

Science.gov (United States)

MacArthur, Juliet; Brown, Michael; McKechanie, Andrew; Mack, Siobhan; Hayes, Matthew; Fletcher, Joan

2015-07-01

To examine the role of learning disability liaison nurses in facilitating reasonable and achievable adjustments to support access to general hospital services for people with learning disabilities. Mixed methods study involving four health boards in Scotland with established Learning Disability Liaison Nurses (LDLN) Services. Quantitative data of all liaison nursing referrals over 18 months and qualitative data collected from stakeholders with experience of using the liaison services within the previous 3-6 months. Six liaison nurses collected quantitative data of 323 referrals and activity between September 2008-March 2010. Interviews and focus groups were held with 85 participants included adults with learning disabilities (n = 5), carers (n = 16), primary care (n = 39), general hospital (n = 19) and liaison nurses (n = 6). Facilitating reasonable and achievable adjustments was an important element of the LDLNs' role and focussed on access to information; adjustments to care; appropriate environment of care; ensuring equitable care; identifying patient need; meeting patient needs; and specialist tools/resources. Ensuring that reasonable adjustments are made in the general hospital setting promotes person-centred care and equal health outcomes for people with a learning disability. This view accords with 'Getting it right' charter produced by the UK Charity Mencap which argues that healthcare professionals need support, encouragement and guidance to make reasonable adjustments for this group. LDLNs have an important and increasing role to play in advising on and establishing adjustments that are both reasonable and achievable. © 2015 John Wiley & Sons Ltd.

TRManager – Technical Risk Manager

Directory of Open Access Journals (Sweden)

Mark A. Gregory

2009-06-01

Full Text Available This paper presents research into the development of a new information management technique called Technical Risk Manager. Project management involves the use of processes and information management techniques to aid decision making in the pursuit of project success. Project success may be achieved by meeting time, cost or performance criteria. Current project management practices focus on achieving time and cost project success criteria by using three information management techniques developed in the 1950s: Gantt, PERT and Critical Path Method. Technical Risk Manager has been developed to provide an information management technique that may be used to aid project management decision making in the pursuit of achieving the performance project success criteria.

Speed of adjustment: Evidence from Borsa Istanbul

Directory of Open Access Journals (Sweden)

Emrah Arioglu

2014-06-01

Full Text Available In this study, we investigate the speed of adjustment for leverage ratios of firms listed on Borsa Istanbul, in order to investigate the prediction of the trade-off theory, regarding capital structure rebalancing. For this purpose, we estimate the speed of adjustment by using Generalized Method of Moments system estimation technique. The results of this estimation suggest the speed of adjustment as approximately 29%. This significant speed of adjustment is consistent with the prediction of trade-off theory, which suggests that firms follow target capital structures and when the firms' leverage ratios deviate from these targets; they make financial decisions with the goal of closing the gap between the previous year's leverage and target leverage of the current period.

Final technical report

DEFF Research Database (Denmark)

Juhl, Thomas Winther; Nielsen, Jakob Skov

gas jet chamber and laser beam path from the final focusing mirror. The project consists of three phases: Phase 1: Fundamental studies of cutting front mechanisms, beam propagation, nozzle design and chemical reactions in the cut kerf with special emphasize on high laser powers and thick sections...... cutting nozzle which can be adjusted independently to the laser beam has been developed. The position of the focus relative the workpiece can be adjusted to cutting applications with relatively large processing windows, i.e. both mild and stainless steels, and of a broad thickness range. A build-in auto......This project entails research with the goal to extend laser cutting of steel based metals to thickness above 20 mm and laser powers in the 10 kW range, with adequate accuracy and economically viable cutting speeds. The technical approach is to develop mirror based cutting heads with truly coaxial...

Extension Education Drives Economic Stimulus through Trade Adjustment Assistance for Farmers

Science.gov (United States)

Neibergs, J. Shannon; Mahnken, Curtis; Moore, Danna L.; Kemper, Nathan P.; Nelson, John Glenn, III; Rainey, Ron; Hipple, Patricia

2015-01-01

Trade Adjustment Assistance for Farmers (TAAF) is a national multifaceted USDA program that provided technical and financial assistance to farmers and fishermen adversely affected by import competition. This article describes how Extension was successfully mobilized to deliver the TAAF program to 10,983 producers across the nation using innovative…

22 CFR 142.44 - Academic adjustments.

Science.gov (United States)

2010-04-01

... services and actions. Recipients need not provide attendants, individually prescribed devices, readers for... adjustments. (a) Academic requirements. A recipient to which this subpart applies shall make such... applicant or student. Academic requirements that the recipient can demonstrate are essential to the...

INDOT Technical Training Plan

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations : for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and E...

Developing e-banking services for rural India: making use of socio-technical prototypes

OpenAIRE

Dittrich, Yvonne; Vaidyanathan, Lakshmi; Gonsalves, Timothy A; Jhunjhunwala, Ashok

2017-01-01

Information and Communication Technology (ICT) is one of the key enablers for including underserved communities in economic and societal development across the world. Our research analyzes several banking service projects developing technical solutions for rural India. This poster presents an experience report based on systematic debriefing of involved project leaders and initiators, triangulated with additional documentation. The concept of Socio-Technical Prototype is developed and used to ...

KSC Technical Capabilities Website

Science.gov (United States)

Nufer, Brian; Bursian, Henry; Brown, Laurette L.

2010-01-01

This document is the website pages that review the technical capabilities that the Kennedy Space Center (KSC) has for partnership opportunities. The purpose of this information is to make prospective customers aware of the capabilities and provide an opportunity to form relationships with the experts at KSC. The technical capabilities fall into these areas: (1) Ground Operations and Processing Services, (2) Design and Analysis Solutions, (3) Command and Control Systems / Services, (4) Materials and Processes, (5) Research and Technology Development and (6) Laboratories, Shops and Test Facilities.

Estimating the subjective value of future rewards: comparison of adjusting-amount and adjusting-delay procedures.

Science.gov (United States)

Holt, Daniel D; Green, Leonard; Myerson, Joel

2012-07-01

The present study examined whether equivalent discounting of delayed rewards is observed with different experimental procedures. If the underlying decision-making process is the same, then similar patterns of results should be observed regardless of procedure, and similar estimates of the subjective value of future rewards (i.e., indifference points) should be obtained. Two experiments compared discounting on three types of procedure: adjusting-delay (AD), adjusting-immediate-amount (AIA), and adjusting-delayed-amount (ADA). For the two procedures for which discounting functions can be established (i.e., AD and AIA), a hyperboloid provided good fits to the data at both the group and individual levels, and individuals' discounting on one procedure tended to be correlated with their discounting on the other. Notably, the AIA procedure produced the more consistent estimates of the degree of discounting, and in particular, discounting on the AIA procedure was unaffected by the order in which choices were presented. Regardless of which of the three procedures was used, however, similar patterns of results were obtained: Participants systematically discounted the value of delayed rewards, and robust magnitude effects were observed. Although each procedure may have its own advantages and disadvantages, use of all three types of procedure in the present study provided converging evidence for common decision-making processes underlying the discounting of delayed rewards. Copyright © 2012 Elsevier B.V. All rights reserved.

78 FR 64932 - Biomass Research and Development Technical Advisory Committee

Science.gov (United States)

2013-10-30

... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY: Energy... announces an open meeting of the Biomass Research and Development Technical Advisory Committee under Section... Biomass Research and Development Technical Advisory Committee. To attend the meeting and/or to make oral...

Heating analysis of cobalt adjusters in reactor core

International Nuclear Information System (INIS)

Mei Qiliang; Li Kang; Fu Yaru

2011-01-01

In order to produce 60 Co source for industry and medicine applications in CANDU-6 reactor, the stainless steel adjusters were replaced with the cobalt adjusters. The cobalt rod will generate the heat when it is irradiated by neutron and γ ray. In addition, 59 Co will be activated and become 60 Co, the ray released due to 60 Co decay will be absorbed by adjusters, and then the adjusters will also generate the heat. So the heating rate of adjusters to be changed during normal operation must be studied, which will be provided as the input data for analyzing the temperature field of cobalt adjusters and the relative heat load of moderator. MCNP code was used to simulate whole core geometric configuration in detail, including reactor fuel, control rod, adjuster, coolant and moderator, and to analyze the heating rate of the stainless steel adjusters and the cobalt adjusters. The maximum heating rate of different cobalt adjuster based on above results will be provided for the steady thermal hydraulic and accident analysis, and make sure that the reactor is safe on the thermal hydraulic. (authors)

Exploration and thinking of dynamic scientific and technical intelligence research

International Nuclear Information System (INIS)

Zhang Xupu; Xia Yun

2014-01-01

This article discusses the concept and types of dynamic scientific and technical intelligence, describes the characteristics and role of dynamic scientific and technical intelligence, and analyzes methods and procedures of dynamic scientific and technical intelligence research. Combined with the status quo of dynamic scientific and technical intelligence research in library of China Institute of Atomic Energy, this article makes some suggestions for strengthening dynamic scientific and technical intelligence research. (authors)

75 FR 33682 - Export Administration Regulations; Technical Amendments

Science.gov (United States)

2010-06-15

...-01] RIN 0694-AE93 Export Administration Regulations; Technical Amendments AGENCY: Bureau of Industry... Bureau of Industry and Security (BIS) makes a technical amendment to the Export Administration... review of final decisions and orders issued in BIS export control administrative enforcement proceedings...

Using Stochastic Frontier Analysis to Analyze Adjustment Costs and Investment Utilization

DEFF Research Database (Denmark)

Olsen, Jakob Vesterlund; Henningsen, Arne

of additional inputs and an initially incomplete investment utilization results in an output level that is temporarily not at its maximum. We estimate an output distance function as a stochastic "Efficiency Effects Frontier" model (Battese & Coelli 1995), where the estimated technical inefficiencies...... are explained with current and lagged investments, farm size, age of the farmer, and interaction terms between these variables. Furthermore, we derive the formula for calculating the marginal effects on technical efficiency for "Efficiency Effects Frontier" models so that we can calculate the (marginal) effect...... of current and past investments on technical efficiency, which we interpret as adjustment costs and temporary incomplete investment utilization. We apply this methodology to a large panel data set of Danish pig producers with 9,281 observations between 1996 and 2008. The results show that investments have...

The Mediating Role of Psychological Adjustment between Peer Victimization and Social Adjustment in Adolescence.

Science.gov (United States)

Romera, Eva M; Gómez-Ortiz, Olga; Ortega-Ruiz, Rosario

2016-01-01

There is extensive scientific evidence of the serious psychological and social effects that peer victimization may have on students, among them internalizing problems such as anxiety or negative self-esteem, difficulties related to low self-efficacy and lower levels of social adjustment. Although a direct relationship has been observed between victimization and these effects, it has not yet been analyzed whether there is a relationship of interdependence between all these measures of psychosocial adjustment. The aim of this study was to examine the relationship between victimization and difficulties related to social adjustment among high school students. To do so, various explanatory models were tested to determine whether psychological adjustment (negative self-esteem, social anxiety and social self-efficacy) could play a mediating role in this relationship, as suggested by other studies on academic adjustment. The sample comprised 2060 Spanish high school students (47.9% girls; mean age = 14.34). The instruments used were the scale of victimization from European Bullying Intervention Project Questionnaire , the negative scale from Rosenberg Self-Esteem Scale, Social Anxiety Scale for Adolescents and a general item about social self-efficacy, all of them self-reports. Structural equation modeling was used to analyze the data. The results confirmed the partial mediating role of negative self-esteem, social anxiety and social self-efficacy between peer victimization and social adjustment and highlight the importance of empowering victimized students to improve their self-esteem and self-efficacy and prevent social anxiety. Such problems lead to the avoidance of social interactions and social reinforcement, thus making it difficult for these students to achieve adequate social adjustment.

The Mediating Role of Psychological Adjustment between Peer Victimization and Social Adjustment in Adolescence

Directory of Open Access Journals (Sweden)

Eva M. Romera

2016-11-01

Full Text Available There is extensive scientific evidence of the serious psychological and social effects that peer victimization may have on students, among them internalizing problems such as anxiety or negative self-esteem, difficulties related to low self-efficacy and lower levels of social adjustment. Although a direct relationship has been observed between victimization and these effects, it has not yet been analyzed whether there is a relationship of interdependence between all these measures of psychosocial adjustment. The aim of this study was to examine the relationship between victimization and difficulties related to social adjustment among high school students. To do so, various explanatory models were tested to determine whether psychological adjustment (negative self-esteem, social anxiety and social self-efficacy could play a mediating role in this relationship, as suggested by other studies on academic adjustment. The sample comprised 2060 Spanish high school students (47.9% girls; mean age = 14.34. The instruments used were the scale of victimization from European Bullying Intervention Project Questionnaire, the negative scale from Rosenberg Self-Esteem Scale, Social Anxiety Scale for Adolescents and a general item about social self-efficacy, all of them self-reports. Structural equation modeling was used to analyze the data. The results confirmed the partial mediating role of negative self-esteem, social anxiety and social self-efficacy between peer victimization and social adjustment and highlight the importance of empowering victimized students to improve their self-esteem and self-efficacy and prevent social anxiety. Such problems lead to the avoidance of social interactions and social reinforcement, thus making it difficult for these students to achieve adequate social adjustment.

Gender and venture capital decision-making: the effects of technical background and social capital on entrepreneurial evaluations.

Science.gov (United States)

Tinkler, Justine E; Bunker Whittington, Kjersten; Ku, Manwai C; Davies, Andrea Rees

2015-05-01

Research on gender and workplace decision-making tends to address either supply-side disparities between men's and women's human and social capital, or demand-side differences in the status expectations of women and men workers. In addition, this work often relies on causal inferences drawn from empirical data collected on worker characteristics and their workplace outcomes. In this study, we demonstrate how tangible education and work history credentials - typically associated with supply-side characteristics - work in tandem with cultural beliefs about gender to influence the evaluative process that underlies venture capital decisions made in high-growth, high-tech entrepreneurship. Using an experimental design, we simulate funding decisions by venture capitalists (VCs) for men and women entrepreneurs that differ in technical background and the presence of important social ties. We demonstrate the presence of two distinct aspects of VCs' evaluation: that of the venture and that of the entrepreneur, and find that the gender of the entrepreneur influences evaluations most when the person, rather than the venture, is the target of evaluation. Technical background qualifications moderate the influence of gendered expectations, and women receive more of a payoff than men from having a close contact to the evaluating VC. We discuss the implications for future research on gender and work. Copyright © 2014 Elsevier Inc. All rights reserved.

Electronic gaming and psychosocial adjustment.

Science.gov (United States)

Przybylski, Andrew K

2014-09-01

The rise of electronic games has driven both concerns and hopes regarding their potential to influence young people. Existing research identifies a series of isolated positive and negative effects, yet no research to date has examined the balance of these potential effects in a representative sample of children and adolescents. The objective of this study was to explore how time spent playing electronic games accounts for significant variation in positive and negative psychosocial adjustment using a representative cohort of children aged 10 to 15 years. A large sample of children and adolescents aged 10 to 15 years completed assessments of psychosocial adjustment and reported typical daily hours spent playing electronic games. Relations between different levels of engagement and indicators of positive and negative psychosocial adjustment were examined, controlling for participant age and gender and weighted for population representativeness. Low levels (3 hours daily) of game engagement was linked to key indicators of psychosocial adjustment. Low engagement was associated with higher life satisfaction and prosocial behavior and lower externalizing and internalizing problems, whereas the opposite was found for high levels of play. No effects were observed for moderate play levels when compared with non-players. The links between different levels of electronic game engagement and psychosocial adjustment were small (Games consistently but not robustly associated with children's adjustment in both positive and negative ways, findings that inform policy-making as well as future avenues for research in the area. Copyright © 2014 by the American Academy of Pediatrics.

Adjustments to financial benefits and contributions with effect from 1 January 2011

CERN Multimedia

HR Department

2011-01-01

In accordance with recommendations made by the Finance Committee and decisions taken by Council in December 2010, certain financial benefits and contributions impacting salaries and stipends have been adjusted with effect from 1 January 2011. 1) Annual adjustments An increase of 0.35% to the scale of basic salaries paid to Staff Members and the scale of stipends paid to Fellows (Annexes R A 5 and R A 6 of the Staff Regulations). No adjustments to the subsistence allowances of Paid Associates and Students (Annex R A 7 of the Staff Regulations). No modifications to the following social benefits: Family, child and infant allowances (Annex R A 3 of the Staff Regulations) Payment ceilings of education fees (Annex R A 4 of the Staff Regulations). 2) Five-yearly review 2010, financial elements: Adjustment of basic salaries: An increase of 1% for Career Path D. An increase of 2% for Career Paths E to G. Technical adjustment of th...

Covariate-adjusted measures of discrimination for survival data

DEFF Research Database (Denmark)

White, Ian R; Rapsomaniki, Eleni; Frikke-Schmidt, Ruth

2015-01-01

by the study design (e.g. age and sex) influence discrimination and can make it difficult to compare model discrimination between studies. Although covariate adjustment is a standard procedure for quantifying disease-risk factor associations, there are no covariate adjustment methods for discrimination...... statistics in censored survival data. OBJECTIVE: To develop extensions of the C-index and D-index that describe the prognostic ability of a model adjusted for one or more covariate(s). METHOD: We define a covariate-adjusted C-index and D-index for censored survival data, propose several estimators......, and investigate their performance in simulation studies and in data from a large individual participant data meta-analysis, the Emerging Risk Factors Collaboration. RESULTS: The proposed methods perform well in simulations. In the Emerging Risk Factors Collaboration data, the age-adjusted C-index and D-index were...

40 CFR 35.4005 - What is a Technical Assistance Grant?

Science.gov (United States)

2010-07-01

... public participation in decision making at eligible sites. A TAG allows your group to procure independent... Technical Assistance Grant? A Technical Assistance Grant (TAG) provides money for your group to obtain... how a technical advisor can help your group include, but are not limited to: (a) Reviewing preliminary...

32 CFR 203.12 - Technical assistance for public participation provider qualifications.

Science.gov (United States)

2010-07-01

... waste problems. (2) Experience in making technical presentations. (3) Demonstrated writing skills. (4... 32 National Defense 2 2010-07-01 2010-07-01 false Technical assistance for public participation... THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS TECHNICAL ASSISTANCE FOR PUBLIC PARTICIPATION (TAPP...

Future strategies on IAEA activities and technical cooperation programmes

International Nuclear Information System (INIS)

Kim, Kyoung Pyo; Hong, Young Don

1998-10-01

This study provides basic background information about the establishment of the IAEA, its mission, major activities, General Conference , and Board of Governors, structure and functions of the Secretariat. The IAEA Mid-term plan, to be implemented in the years 1998 - 2003, includes the enhancement of its functional effectiveness, analysis of the changing developments, adjustment of its priorities, and evaluation of its programmes, are describes in full detail. This plan is divided into 6 major areas ; nuclear power and the fuel cycle, nuclear applications, nuclear, radiation and radwaste safety, verification and security of nuclear material, management of technical cooperation for development, policy making, coordination and support. It is also expected that the IAEA plan provides an opportunity to understand the future directions of IAEA programmes and its operational philosophy, thus greatly contributing to Koreas establishment of its own future directions for expanded cooperation with the IAEA, and urges to device effective domestic strategies. This plan will also contribute to the evaluation of Koreas responsibility as a member of the Board of Governors as well as enhance Koreas role as an Advisory Group Member. It is expected that this study is useful for nuclear-related organizations wishing to establish basic directions for the efficient implementation of IAEA technical cooperation programs in the future. (author). 16 refs., 6 tabs., 16 figs

Using Linear and Non-Linear Temporal Adjustments to Align Multiple Phenology Curves, Making Vegetation Status and Health Directly Comparable

Science.gov (United States)

Hargrove, W. W.; Norman, S. P.; Kumar, J.; Hoffman, F. M.

2017-12-01

National-scale polar analysis of MODIS NDVI allows quantification of degree of seasonality expressed by local vegetation, and also selects the most optimum start/end of a local "phenological year" that is empirically customized for the vegetation that is growing at each location. Interannual differences in timing of phenology make direct comparisons of vegetation health and performance between years difficult, whether at the same or different locations. By "sliding" the two phenologies in time using a Procrustean linear time shift, any particular phenological event or "completion milestone" can be synchronized, allowing direct comparison of differences in timing of other remaining milestones. Going beyond a simple linear translation, time can be "rubber-sheeted," compressed or dilated. Considering one phenology curve to be a reference, the second phenology can be "rubber-sheeted" to fit that baseline as well as possible by stretching or shrinking time to match multiple control points, which can be any recognizable phenological events. Similar to "rubber sheeting" to georectify a map inside a GIS, rubber sheeting a phenology curve also yields a warping signature that shows at every time and every location how many days the adjusted phenology is ahead or behind the phenological development of the reference vegetation. Using such temporal methods to "adjust" phenologies may help to quantify vegetation impacts from frost, drought, wildfire, insects and diseases by permitting the most commensurate quantitative comparisons with unaffected vegetation.

A Technical/Strategic Paradigm for Online Executive Education

Science.gov (United States)

Smith, Marlene A.; Keaveney, Susan M.

2017-01-01

This article discusses the development and delivery of online courses for the executive education audience. The goal is to introduce a new framework, the technical/strategic paradigm, that will help educators to identify the pedagogical needs of disparate executive groups and adjust their online course development plans accordingly. We describe…

Making PMT halftone prints

Energy Technology Data Exchange (ETDEWEB)

Corey, J.D.

1977-05-01

In the printing process for technical reports presently used at Bendix Kansas City Division, photographs are reproduced by pasting up PMT halftone prints on the artwork originals. These originals are used to make positive-working plastic plates for offset lithography. Instructions for making good-quality halftone prints using Eastman Kodak's PMT materials and processes are given in this report. 14 figures.

76 FR 80735 - Corrections and Technical Amendments to 16 OSHA Standards

Science.gov (United States)

2011-12-27

... 1926 Corrections and Technical Amendments to 16 OSHA Standards AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Notice of corrections and technical amendments to standards. SUMMARY: OSHA is correcting typographical errors in, and making non- substantive technical amendments to, 16 OSHA...

Surgeons' and trainees' perceived self-efficacy in operating theatre non-technical skills.

Science.gov (United States)

Pena, G; Altree, M; Field, J; Thomas, M J W; Hewett, P; Babidge, W; Maddern, G J

2015-05-01

An important factor that may influence an individual's performance is self-efficacy, a personal judgement of capability to perform a particular task successfully. This prospective study explored newly qualified surgeons' and surgical trainees' self-efficacy in non-technical skills compared with their non-technical skills performance in simulated scenarios. Participants undertook surgical scenarios challenging non-technical skills in two simulation sessions 6 weeks apart. Some participants attended a non-technical skills workshop between sessions. Participants completed pretraining and post-training surveys about their perceived self-efficacy in non-technical skills, which were analysed and compared with their performance in surgical scenarios in two simulation sessions. Change in performance between sessions was compared with any change in participants' perceived self-efficacy. There were 40 participants in all, 17 of whom attended the non-technical skills workshop. There was no significant difference in participants' self-efficacy regarding non-technical skills from the pretraining to the post-training survey. However, there was a tendency for participants with the highest reported self-efficacy to adjust their score downwards after training and for participants with the lowest self-efficacy to adjust their score upwards. Although there was significant improvement in non-technical skills performance from the first to second simulation sessions, a correlation between participants' self-efficacy and performance in scenarios in any of the comparisons was not found. The results suggest that new surgeons and surgical trainees have poor insight into their non-technical skills. Although it was not possible to correlate participants' self-belief in their abilities directly with their performance in a simulation, in general they became more critical in appraisal of their abilities as a result of the intervention. © 2015 BJS Society Ltd Published by John Wiley & Sons Ltd.

IAEA technical co-operation with least developed Member States. Special evaluation

International Nuclear Information System (INIS)

1993-01-01

The main purposes of this evaluation were to: Review the overall situation with regard to IAEA technical co-operation with least developed Member States, including specific conditions in nuclear-related activities prevailing in these countries, approaches and practices used by the IAEA in providing assistance to LDCs, and the main results of the co-operation in question. Identify any adjustments to technical co-operation with LDC Member States that may strengthen this activity

Approval Procedure for Technical Specifications for Procurement by Quotation and Tender

International Nuclear Information System (INIS)

Shaharum Ramli; Izhar Abu Hussin; Ying, K.K.

2015-01-01

Technical specifications for procurement requires the approval of the Jawatankuasa Penyemak Spesifikasi Teknikal Tender/ Sebutharga Agensi Nuklear Malaysia. This paper provides guidance for those who have to prepare a technical specification. In addition, the technical specification online library is introduced to facilitate them to re-use old technical specifications for new procurements or to make those the bases for drafting new specifications. (author)

26 CFR 1.9001 - Statutory provisions; Retirement-Straight Line Adjustment Act of 1958.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 13 2010-04-01 2010-04-01 false Statutory provisions; Retirement-Straight Line... provisions; Retirement-Straight Line Adjustment Act of 1958. Section 94 of the Technical Amendments Act of 1958 (72 Stat. 1669) provides as follows: Sec. 94. Change from retirement to straight line method of...

Does spirituality facilitate adjustment and resilience among individuals and families after SCI?

Science.gov (United States)

Jones, Kate; Simpson, Grahame Kenneth; Briggs, Lynne; Dorsett, Pat

2016-01-01

The purpose of this scoping review was to investigate the role of spirituality in facilitating adjustment and resilience after spinal cord injury (SCI) for the individual with SCI and their family members. METHOD-DATA SOURCES: Peer reviewed journals were identified using PsychInfo, MEDLINE, CINAHL, Embase and Sociological Abstracts search engines. After duplicates were removed, 434 abstracts were screened applying inclusion and exclusion criteria. The selected 28 studies were reviewed in detail and grouped according to methodological approach. Of the 28 studies relating to spirituality and related meaning-making constructs, 26 addressed the adjustment of the individual with SCI alone. Only two included family members as participants. Quantitative studies demonstrated that spirituality was positively associated with life satisfaction, quality of life, mental health and resilience. The utilisation of meaning-making and hope as coping strategies in the process of adjustment were highlighted within the qualitative studies. Clinical implications included recommendations that spirituality and meaning-making be incorporated in assessment and interventions during rehabilitation. The use of narratives and peer support was also suggested. Spirituality is an important factor in adjustment after SCI. Further research into the relationship between spirituality, family adjustment and resilience is needed. Higher levels of spirituality were associated with improved quality of life, life satisfaction, mental health, and resilience for individuals affected by spinal cord injury. Health professionals can enhance the role that spirituality plays in spinal rehabilitation by incorporating the spiritual beliefs of individuals and their family members into assessment and intervention. By drawing upon meaning-making tools, such as narrative therapy, incorporating peer support, and assisting clients who report a decline in spirituality, health professionals can provide additional support

Case‐mix adjustment in non‐randomised observational evaluations: the constant risk fallacy

OpenAIRE

Nicholl, Jon

2007-01-01

Observational studies comparing groups or populations to evaluate services or interventions usually require case‐mix adjustment to account for imbalances between the groups being compared. Simulation studies have, however, shown that case‐mix adjustment can make any bias worse.

Methodological Adjust the Water Scarcity Index, Proposed by the IDEAM in the Plan of Arrangement and Management of the Basin of Pamplonita River - Norte de Santander, Colombia

International Nuclear Information System (INIS)

Infante Romero, Hebert Augusto; Ortiz, Luis Fernando

2008-01-01

A methodological adjustment was made to shortage index calculation taking the Pamplonita river case, which is incorporated as a management tool in watershed management plans using the guide published by the Institute of Hydrology, Meteorology and Environmental Studies -IDEAM. The objective was to improve the standard resolution of the information to make it more reliable in water supply and water demand for various uses, which in combination related to shortage index will become a technical-scientific decision-making element on water management within the framework of watershed management. The result gave the highest reliability on estimated municipal shortage index and demonstrated the urgent need to plan the supply of various demands, because more than 80% of the population of the basin is in a shortage of high rank in a typical year.

A Case Study in Competitive Technical and Market Intelligence Support and Lessons Learned for the uChemLab LDRD Grand Challenge Project; TOPICAL

International Nuclear Information System (INIS)

SOUTHWELL, EDWIN T.; GARCIA, MARIE L.; MEYERS, CHARLES E.

2001-01-01

The(mu)ChemLab(trademark) Laboratory Directed Research and Development (LDRD) Grand Challenge project began in October 1996 and ended in September 2000. The technical managers of the(mu)ChemLab(trademark) project and the LDRD office, with the support of a consultant, conducted a competitive technical and market demand intelligence analysis of the(mu)ChemLab(trademark). The managers used this knowledge to make project decisions and course adjustments. CTI/MDI positively impacted the project's technology development, uncovered potential technology partnerships, and supported eventual industry partner contacts. CTI/MDI analysis is now seen as due diligence and the(mu)ChemLab(trademark) project is now the model for other Sandia LDRD Grand Challenge undertakings. This document describes the CTI/MDI analysis and captures the more important ''lessons learned'' of this Grand Challenge project, as reported by the project's management team

An Intelligent technical analysis using neural network

Directory of Open Access Journals (Sweden)

Reza Raei

2011-07-01

Full Text Available Technical analysis has been one of the most popular methods for stock market predictions for the past few decades. There have been enormous technical analysis methods to study the behavior of stock market for different kinds of trading markets such as currency, commodity or stock. In this paper, we propose two different methods based on volume adjusted moving average and ease of movement for stock trading. These methods are used with and without generalized regression neural network methods and the results are compared with each other. The preliminary results on historical stock price of 20 firms indicate that there is no meaningful difference between various proposed models of this paper.

A decision making framework for risk-informed technical specifications

International Nuclear Information System (INIS)

Kim, B. S.; Kim, I. S.; Seo, M. S.; Sung, G. Y.

2001-01-01

The RITS literature survey on regulatory requirements and current TS research status in Korea as well as in foreign countries has been performed. Based on this survey, the RITS decision-making framework for the licensee and regulator point-of-view, respectively, is introduced in this paper. The required documents for the licensee to prepare are suggested in a systematic approach; the decision-making process of regulators for evaluating the documents is recommended

Least Squares Adjustment: Linear and Nonlinear Weighted Regression Analysis

DEFF Research Database (Denmark)

Nielsen, Allan Aasbjerg

2007-01-01

This note primarily describes the mathematics of least squares regression analysis as it is often used in geodesy including land surveying and satellite positioning applications. In these fields regression is often termed adjustment. The note also contains a couple of typical land surveying...... and satellite positioning application examples. In these application areas we are typically interested in the parameters in the model typically 2- or 3-D positions and not in predictive modelling which is often the main concern in other regression analysis applications. Adjustment is often used to obtain...... the clock error) and to obtain estimates of the uncertainty with which the position is determined. Regression analysis is used in many other fields of application both in the natural, the technical and the social sciences. Examples may be curve fitting, calibration, establishing relationships between...

Assessing the Efficacy of Adjustable Moving Averages Using ASEAN-5 Currencies.

Directory of Open Access Journals (Sweden)

Jacinta Chan Phooi M'ng

Full Text Available The objective of this research is to examine the trends in the exchange rate markets of the ASEAN-5 countries (Indonesia (IDR, Malaysia (MYR, the Philippines (PHP, Singapore (SGD, and Thailand (THB through the application of dynamic moving average trading systems. This research offers evidence of the usefulness of the time-varying volatility technical analysis indicator, Adjustable Moving Average (AMA' in deciphering trends in these ASEAN-5 exchange rate markets. This time-varying volatility factor, referred to as the Efficacy Ratio in this paper, is embedded in AMA'. The Efficacy Ratio adjusts the AMA' to the prevailing market conditions by avoiding whipsaws (losses due, in part, to acting on wrong trading signals, which generally occur when there is no general direction in the market in range trading and by entering early into new trends in trend trading. The efficacy of AMA' is assessed against other popular moving-average rules. Based on the January 2005 to December 2014 dataset, our findings show that the moving averages and AMA' are superior to the passive buy-and-hold strategy. Specifically, AMA' outperforms the other models for the United States Dollar against PHP (USD/PHP and USD/THB currency pairs. The results show that different length moving averages perform better in different periods for the five currencies. This is consistent with our hypothesis that a dynamic adjustable technical indicator is needed to cater for different periods in different markets.

Assessing the Efficacy of Adjustable Moving Averages Using ASEAN-5 Currencies.

Science.gov (United States)

Chan Phooi M'ng, Jacinta; Zainudin, Rozaimah

2016-01-01

The objective of this research is to examine the trends in the exchange rate markets of the ASEAN-5 countries (Indonesia (IDR), Malaysia (MYR), the Philippines (PHP), Singapore (SGD), and Thailand (THB)) through the application of dynamic moving average trading systems. This research offers evidence of the usefulness of the time-varying volatility technical analysis indicator, Adjustable Moving Average (AMA') in deciphering trends in these ASEAN-5 exchange rate markets. This time-varying volatility factor, referred to as the Efficacy Ratio in this paper, is embedded in AMA'. The Efficacy Ratio adjusts the AMA' to the prevailing market conditions by avoiding whipsaws (losses due, in part, to acting on wrong trading signals, which generally occur when there is no general direction in the market) in range trading and by entering early into new trends in trend trading. The efficacy of AMA' is assessed against other popular moving-average rules. Based on the January 2005 to December 2014 dataset, our findings show that the moving averages and AMA' are superior to the passive buy-and-hold strategy. Specifically, AMA' outperforms the other models for the United States Dollar against PHP (USD/PHP) and USD/THB currency pairs. The results show that different length moving averages perform better in different periods for the five currencies. This is consistent with our hypothesis that a dynamic adjustable technical indicator is needed to cater for different periods in different markets.

Non-technical skills assessment in surgery.

Science.gov (United States)

Sharma, Bharat; Mishra, Amit; Aggarwal, Rajesh; Grantcharov, Teodor P

2011-09-01

Adverse events in surgery have highlighted the importance of non-technical skills, such as communication, decision-making, teamwork, situational awareness and leadership, to effective organizational performance. These skills carry particular importance to surgical oncology, as members of a multidisciplinary team must work cohesively to formulate effective patient care plans. Several non-technical skills evaluation tools have been developed for use in surgery, without adequate comparison and consensus on which should be standard for training. Eleven articles describing the use of three non-technical evaluation tools related to surgery: NOTSS (Non Technical Skills for Surgeons), NOTECHS (Non Technical Skills) and OTAS (Observational Teamwork Assessment for Surgery) were analyzed with respect to scale formulation, validity, reliability and feasibility. Furthermore, their use in training thus far and the future of non-technical rating scales in surgical curricula was discussed. Future work should focus on incorporating these assessment tools into training and into a real operating room setting to provide formative evaluations for surgical residents. Copyright © 2010 Elsevier Ltd. All rights reserved.

Diagnostic Risk Adjustment for Medicaid: The Disability Payment System

Science.gov (United States)

Kronick, Richard; Dreyfus, Tony; Lee, Lora; Zhou, Zhiyuan

1996-01-01

This article describes a system of diagnostic categories that Medicaid programs can use for adjusting capitation payments to health plans that enroll people with disability. Medicaid claims from Colorado, Michigan, Missouri, New York, and Ohio are analyzed to demonstrate that the greater predictability of costs among people with disabilities makes risk adjustment more feasible than for a general population and more critical to creating health systems for people with disability. The application of our diagnostic categories to State claims data is described, including estimated effects on subsequent-year costs of various diagnoses. The challenges of implementing adjustment by diagnosis are explored. PMID:10172665

The effect of chemically adjusting cement compositions on leachabilities of waste ions

International Nuclear Information System (INIS)

Barnes, M.W.; Scheetz, B.E.; Roy, D.M.

1986-01-01

The chemical composition of both portland and aluminate cements was adjusted by adding amorphous silica. In the case of portland cement, the object was to react with excess portlandite and obtain an overall composition compatible with C-S-H gel or C-S-H gel + silica at low temperatures, and to obtain the tobermorite composition in order to be in equilibrium with this phase at temperatures above normal ambient. In the case of aluminate cement, the object was to be in equilibrium with more silica-rich phases. These silica-adjusted cements were used to make composites with nuclear waste forms. Leach tests showed that the silica-adjusted composites were chemically more stable than those made with as-received cement. Leach rates were lower in the case of the adjusted cements for Rb, Cs, Ca, Sr, Ba, La, Ce, Nd, Gd, Al, and Si. Only Na in the case of both portland and aluminate cements, and Mg and U in the case of aluminate cements, had greater leach rates in adjusted cements. Adjusting the composition of cements with silica is concluded to be beneficial when making composites to encapsulate nuclear waste forms

RAMS+C informed decision-making with application to multi-objective optimization of technical specifications and maintenance using genetic algorithms

International Nuclear Information System (INIS)

Martorell, S.; Villanueva, J.F.; Carlos, S.; Nebot, Y.; Sanchez, A.; Pitarch, J.L.; Serradell, V.

2005-01-01

The role of technical specifications and maintenance (TSM) activities at nuclear power plants (NPP) aims to increase reliability, availability and maintainability (RAM) of Safety-Related Equipment, which, in turn, must yield to an improved level of plant safety. However, more resources (e.g. costs, task force, etc.) have to be assigned in above areas to achieve better scores in reliability, availability, maintainability and safety (RAMS). Current situation at NPP shows different programs implemented at the plant that aim to the improvement of particular TSM-related parameters where the decision-making process is based on the assessment of the impact of the change proposed on a subgroup of RAMS+C attributes. This paper briefly reviews the role of TSM and two main groups of improvement programs at NPP, which suggest the convenience of considering the approach proposed in this paper for the Integrated Multi-Criteria Decision-Making on changes to TSM-related parameters based on RAMS+C criteria as a whole, as it can be seem as a decision-making process more consistent with the role and synergic effects of TSM and the objectives and goals of current improvement programs at NPP. The case of application to the Emergency Diesel Generator system demonstrates the viability and significance of the proposed approach for the Multi-objective Optimization of TSM-related parameters using a Genetic Algorithm

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

NARCIS (Netherlands)

Krage, R.; Zwaan, L.; Tjon Soei Len, L.; Kolenbrander, M.; Groeningen, D. van; Loer, S.A.; Wagner, C.; Schober, P.

2017-01-01

Background: Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary

78 FR 44105 - Biomass Research and Development Technical Advisory Committee

Science.gov (United States)

2013-07-23

... Research and Development Technical Advisory Committee. To attend the meeting and/or to make oral statements... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Energy Efficiency and Renewable Energy, Department of Energy. ACTION...

76 FR 63614 - Biomass Research and Development Technical Advisory Committee

Science.gov (United States)

2011-10-13

... Biomass Research and Development Technical Advisory Committee. To attend the meeting and/or to make oral... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Energy Efficiency and Renewable Energy, Department of Energy. ACTION...

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: Does stress have an influence?

NARCIS (Netherlands)

Krage, R. (Ralf); L. Zwaan (Laura); Tjon Soei Len, L. (Lian); Kolenbrander, M.W. (Mark W); Van Groeningen, D. (DIck); S.A. Loer (Stephan A.); C. Wagner (Cordula); P. Schober (P.)

2017-01-01

textabstractBackground Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary

A process for integrating public involvement into technical/social programs

International Nuclear Information System (INIS)

Wiltshire, S.; Williams, C.

1994-01-01

Good technical/social decisions--those that are technically sound and publicly acceptable--result from a planning process that considers consulting the public a basic part of the technical program, as basic as hiring a technical consultant to advise about new ideas in computer modeling. This paper describes a specific process for making public involvement an integral part of decision-making about high-level radioactive waste management, so that important technical, social, environmental, economic, and cultural information and values can be incorporated in a meaningful way in planning and carrying out a high-level waste management program or project. The process for integration must consider: (a) the decision or task for which public interaction is needed; (b) the people who should or will want to participate in the decision or task; (c) the goals or purposes of the communication or interaction--the agency's and the public's; (d) the kinds of information the public needs and that the agency needs in order to understand the relevant technical and social issues; and (e) the types of communication or involvement that best serve to meet the agency's and the public's goals

Reforming Technical and Technological Education.

Science.gov (United States)

Wilson, David N.

1993-01-01

Review of technical and technological educational reform in Brazil, Canada, Germany, Great Britain, Indonesia, Malaysia, Singapore, and Sweden shows that reform takes time to complete effectively, long-term approaches are needed, and reform is linked to industrial development, regional cooperation, and decentralized decision making. (SK)

Hanford Site technical baseline database. Revision 1

International Nuclear Information System (INIS)

Porter, P.E.

1995-01-01

This report lists the Hanford specific files (Table 1) that make up the Hanford Site Technical Baseline Database. Table 2 includes the delta files that delineate the differences between this revision and revision 0 of the Hanford Site Technical Baseline Database. This information is being managed and maintained on the Hanford RDD-100 System, which uses the capabilities of RDD-100, a systems engineering software system of Ascent Logic Corporation (ALC). This revision of the Hanford Site Technical Baseline Database uses RDD-100 version 3.0.2.2 (see Table 3). Directories reflect those controlled by the Hanford RDD-100 System Administrator. Table 4 provides information regarding the platform. A cassette tape containing the Hanford Site Technical Baseline Database is available

CONTRIBUTING FACTORS TOWARDS DIFFICULTIES IN GENERATING IDEAS AMONG TECHNICAL STUDENTS

OpenAIRE

Yee Mei Heong

2013-01-01

Idea is a thought or collection of thoughts that are important to decision making and problem solving.  The purpose of this research was to analysis the factors contributing to difficulty in generating ideas among technical students.  A total of 375 technical students from four technical universities in Malaysia were randomly selected as samples.  A set of questionnaires was developed and used as research instrument.  The findings indicated that a total of 319 (85.1%) technical students faced...

Making the most of LCA in technical inter-organisational R&D projects

DEFF Research Database (Denmark)

Sandin, Gustav; Clancy, Gunilla; Heimersson, Sara

2014-01-01

In technical Research and Development (R&D) projects, a Life Cycle Assessment (LCA) of the technology under development is sometimes carried out. Particularly in inter-organisational R&D projects, the roles of LCAs tend to be unclear and arbitrary, and as a consequence, LCA work is not adequately...... designed for the needs of the project. There is a need for research on how to choose an appropriate role for LCA in such projects and how to plan LCA work accordingly. We have identified some possible roles of LCA in inter-organisational R&D projects and used experiences from LCA work in different...... such projects to identify four project characteristics that are decisive for what roles the LCA can have. The project characteristics are: (i) the project's potential influence on environmental impacts, (ii) the degrees of freedom available for the technical direction of the project, (iii) the project...

Estimating and Adjusting Field Quality in Superconducting Accelerator Magnets

Energy Technology Data Exchange (ETDEWEB)

Gupta, R. [Brookhaven National Lab. (BNL), Upton, NY (United States)

1996-02-01

The experience with estimating and adjusting field quality in RHIC and SSC magnets is discussed. An alternative approach which makes a better estimate for systematic and random values of harmonics is presented.

INDOT Technical Training Plan : Appendix H

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix L

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix D

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix A

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix G

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix P

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix I

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix M

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix F

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix E

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix O

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix J

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix K

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix B

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix N

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix C

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

End-of-treatment and serial PET imaging in primary mediastinal B-cell lymphoma following dose-adjusted-EPOCH-R: A paradigm shift in clinical decision making.

Science.gov (United States)

Melani, Christopher; Advani, Ranjana; Roschewski, Mark; Walters, Kelsey M; Chen, Clara C; Baratto, Lucia; Ahlman, Mark A; Miljkovic, Milos D; Steinberg, Seth M; Lam, Jessica; Shovlin, Margaret; Dunleavy, Kieron; Pittaluga, Stefania; Jaffe, Elaine S; Wilson, Wyndham H

2018-05-10

Dose-adjusted-EPOCH-R obviates the need for radiotherapy in most patients with primary mediastinal B-cell lymphoma. End-of-treatment PET, however, does not accurately identify patients at risk of treatment failure, thereby confounding clinical decision making. To define the role of PET in primary mediastinal B-cell lymphoma following dose-adjusted-EPOCH-R, we extended enrollment and follow-up on our published phase II trial and independent series. Ninety-three patients received dose-adjusted-EPOCH-R without radiotherapy. End-of-treatment PET was performed in 80 patients, of whom 57 received 144 serial scans. One nuclear medicine physician from each institution blindly reviewed all scans from their respective institution. End-of-treatment PET was negative (Deauville 1-3) in 55 (69%) patients with one treatment failure (8-year event-free and overall survival of 96.0% and 97.7%). Among 25 (31%) patients with a positive (Deauville 4-5) end-of-treatment PET, there were 5 (20%) treatment failures (8-year event-free and overall survival of 71.1% and 84.3%). Linear regression analysis of serial scans showed a significant decrease in SUVmax in positive end-of-treatment PET non-progressors compared to an increase in treatment failures. Among 6 treatment failures, the median end-of-treatment SUVmax was 15.4 (range, 1.9-21.3) and 4 achieved long-term remission with salvage therapy. Virtually all patients with a negative end-of-treatment PET following dose-adjusted-EPOCH-R achieved durable remissions and should not receive radiotherapy. Among patients with a positive end-of-treatment PET, only 5/25 (20%) had treatment-failure. Serial PET imaging distinguished end-of-treatment PET positive patients without treatment failure, thereby reducing unnecessary radiotherapy by 80%, and should be considered in all patients with an initial positive PET following dose-adjusted-EPOCH-R (NCT00001337). Copyright © 2018, Ferrata Storti Foundation.

Incorporating technical analysis in undergraduate curricula

Directory of Open Access Journals (Sweden)

Michael R. Melton

2017-11-01

Full Text Available Purpose – The purpose of this paper is to introduce instruction of technical analysis on the undergraduate level that can coincide with traditional teachings of fundamental analysis. Design/methodology/approach – Through examples using the latest in security analysis technology, this paper illustrates the importance of technical security analysis. Findings – This research illustrates how technical analysis techniques may be used to make more significant investment decisions. Originality/value – Kirkpatrick and Dahlquist define technical analysis as a security analysis discipline for forecasting future direction of prices through the study of past market data primarily price and volume This form of analysis has stood in direct contrast to the fundamental analysis approach whereby actual facts of the company its industry and sector may be ignored. Understanding this contrast, much of academia has chosen to continue to focus its finance curricula on fundamental analysis techniques. As more universities implement trading rooms to reflect that of industry, they must recognize that any large brokerage trading group or financial institution will typically have both a technical analysis and fundamental analysis team. Thus, the need to incorporate technical analysis into undergraduate finance curricula.

TECHNICAL COORDINATION

CERN Document Server

A. Ball and W. Zeuner

2013-01-01

For the reporting period, the CMS common systems and infrastructure worked well, without failures that caused significant data losses. One more disconnection of the magnet cold box occurred in the shadow of interruptions in data taking, caused by a series of technical faults. The recognition during 2012 that re-connection can only safely be done at around 2 T implies a minimum magnet recovery time of 12 hours and raises serious concerns about the number of ramping cycles of the magnet these incidents cause. This has triggered studies of how to make the cryo-system of the magnet more robust against failures. The proton-proton run ended just before the end-of-year CERN closure, during which CASTOR was installed on the negative end of CMS and both ZDC calorimeters were installed in TAN absorbers the LHC tunnel, in preparation for the heavy-ion run. The installation of CASTOR was an excellent “engineering test” of procedures for working in an activated environment. Despite some technical pr...

Environmental data quality problems: ''Technical'' vs. ''legal'' defensibility

International Nuclear Information System (INIS)

Luker, R.S.; Brooks, M.C.; Stagg, D.D.

1995-01-01

Two significant aspects of environmental data quality are currently being emphasized throughout the industry as critical precursors to environmental decision making: technical integrity and legal defensibility. Because audit findings and consequent perceptions by a client often pose more questions than answers--especially with respect to the ''systemic'' nature and significance of problems based on nonstatistical, ad hoc sampling of large programs--quality assurance in environmental restoration must do more than implement traditional administrative controls. A major problem persists in achieving a consensus opinion between quality assurance and technical staff on the significance of various data problems. This case study compares and contrasts ''technical integrity'' and ''legal defensibility'', and provides performance measures developed to optimize both components in a large, complex DOE environmental restoration program. Performance measures of both administrative and technical processes are being used to ensure that conclusions drawn concerning ''systematic'' problems are not premature, and are founded on thorough, representative aspects of the program. Improved methods to reach consensus opinions on environmental decision-making are imperative and environmental data quality, the cornerstone on which the decisions are built, must be not only scientifically solid, but perceived as solid, if stakeholders are to be satisfied

Technical writing versus technical writing

Science.gov (United States)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

Maternal Zinc Intakes and Homeostatic Adjustments during Pregnancy and Lactation

OpenAIRE

Donangelo, Carmen Marino; King, Janet C.

2012-01-01

Zinc plays critical roles during embryogenesis, fetal growth, and milk secretion, which increase the zinc need for pregnancy and lactation. Increased needs can be met by increasing the dietary zinc intake, along with making homeostatic adjustments in zinc utilization. Potential homeostatic adjustments include changes in circulating zinc, increased zinc absorption, decreased zinc losses, and changes in whole body zinc kinetics. Although severe zinc deficiency during pregnancy has devastating e...

Technical writing in America: A historical perspective

Science.gov (United States)

Connaughton, M. E.

1981-01-01

The standard distinction between poetic and referential language, the gulf between science and the humanities, and the distress many teachers of English feel when faced for the first time with the prospect of teaching technical writing are discussed. In the introduction of many technical writing textbooks. Technical communication is divorced from other forms of linguistic experience by making language limiting and reductive rather than creative and expansive. The emphasis on technical/scientific writing as radically different had blinded people to those traits it has in common with all species of composition and has led to a neglect of research, on fundamental rhetorical issues. A complete rhetorical theory of technical discourse should include information about the attitudes and motives of writers, the situations which motivate (or coerce) them to write, definitive features of technical style and form, interrelationship of expression and creativity, and functions of communication in shaping and preserving scientific networds and institutions. The previous areas should be explored with respect to contemporary practice and within an historical perspective.

Autism spectrum disorders in relation to parental occupation in technical fields.

Science.gov (United States)

Windham, Gayle C; Fessel, Karen; Grether, Judith K

2009-08-01

A previous study reported that fathers of children with autism spectrum disorders (ASD) were more likely to work as engineers, requiring "systemizing skills," and suggesting a distinct phenotype, but alternatively this may have been related to selection biases. We conducted a population-based study to explore whether fathers, or mothers, of children with ASD are over-represented in fields requiring highly technical skills. Subjects included 284 children with ASD and 659 gender-matched controls, born in 1994 in the San Francisco Bay Area. Parental occupation and industry were abstracted verbatim from birth certificates. Engineering, computer programming, and science were examined as highly technical occupations. To limit bias by parental socio-economic status, we selected a referent group of occupations that seemed professionally similar but of a less technical nature. Odds ratios (ORs) and 95% confidence intervals (CI) were calculated by logistic regression, adjusting for parental age, education, and child race. Mothers of cases were somewhat more likely to work in hi-tech occupations (6.7%) than mothers of controls (4.0%, P=0.07), but little difference was observed among fathers, nor for engineering separately. Compared to parents in other "white collar" occupations, the adjusted OR for highly technical occupations among mothers was 2.5 (95% CI: 1.2-5.3) and among fathers was 1.3 (95% CI: 0.79-2.1), with no evidence of a joint effect observed. Our results regarding maternal occupation in technical fields being associated with ASD in offspring suggest further study to distinguish parental occupation as a phenotypic marker of genetic loading vs. other social or exposure factors.

Decide Now - Ditch Decision Making

National Research Council Canada - National Science Library

Campion, John

2004-01-01

.... The separation of psychology into sub-disciplines or paradigms that don't talk to one another. 3. The failure to distinguish between technical and common language usage when dealing with concepts such as decision making and command...

NHTSA's Office of Defects Investigation (ODI) - Technical Service Bulletins System (TSBS) - Downloadable file

Data.gov (United States)

Department of Transportation — The Technical Service Bulletins data contains summaries of the Manufacturers' Technical Service Bulletins by single year, make and model. An optional item of Vehicle...

Putting health metrics into practice: using the disability-adjusted life year for strategic decision making.

Science.gov (United States)

Longfield, Kim; Smith, Brian; Gray, Rob; Ngamkitpaiboon, Lek; Vielot, Nadja

2013-01-01

Implementing organizations are pressured to be accountable for performance. Many health impact metrics present limitations for priority setting; they do not permit comparisons across different interventions or health areas. In response, Population Services International (PSI) adopted the disability-adjusted life year (DALY) averted as its bottom-line performance metric. While international standards exist for calculating DALYs to determine burden of disease (BOD), PSI's use of DALYs averted is novel. It uses DALYs averted to assess and compare the health impact of its country programs, and to understand the effectiveness of a portfolio of interventions. This paper describes how the adoption of DALYs averted influenced organizational strategy and presents the advantages and constraints of using the metric. Health impact data from 2001-2011 were analyzed by program area and geographic region to measure PSI's performance against its goal of doubling health impact between 2007-2011. Analyzing 10 years of data permitted comparison with previous years' performance. A case study of PSI's Asia and Eastern European (A/EE) region, and PSI/Laos, is presented to illustrate how the adoption of DALYs averted affected strategic decision making. Between 2007-2011, PSI's programs doubled the total number of DALYs averted from 2002-2006. Most DALYs averted were within malaria, followed by HIV/AIDS and family planning (FP). The performance of PSI's A/EE region relative to other regions declined with the switch to DALYs averted. As a result, the region made a strategic shift to align its work with countries' BOD. In PSI/Laos, this redirection led to better-targeted programs and an approximate 50% gain in DALYs averted from 2009-2011. PSI's adoption of DALYs averted shifted the organization's strategic direction away from product sales and toward BOD. Now, many strategic decisions are based on "BOD-relevance," the share of the BOD that interventions can potentially address. This switch

Adjusting to a Diagnosis of Cancer: Processes for Building Patient Capacity for Decision-Making.

Science.gov (United States)

Emanuel, Linda; Johnson, Rebecca; Taromino, Caroline

2017-09-01

This short report contributes to the expanding body of qualitative research literature about the cognitive processes of newly diagnosed cancer patients as they adjust to a diagnosis of cancer. The study is based on secondary qualitative analysis of audio records collected as part of a larger NIH study (RO1D: An Interdisciplinary Perspective: A Social Science Examination of Oncofertility RL1 HD058296). Core categories illustrate the processes of "naming it," "dealing with dealing with it," and finding the "new norm" and were based on nine patient experiences. We observe that our substantive conceptual categories have equivalents in bereavement and grief literature where researchers have posited the theory that processing the diagnosis of a terminal illness is the equivalent to adjusting to a bereavement. These findings emphasize the importance of understanding real-time patient thoughts and feelings as soon after diagnosis as was possible with full patient consent.

Humans make near-optimal adjustments of control to initial body configuration in vertical squat jumping.

Science.gov (United States)

Bobbert, Maarten F; Richard Casius, L J; Kistemaker, Dinant A

2013-05-01

We investigated adjustments of control to initial posture in squat jumping. Eleven male subjects jumped from three initial postures: preferred initial posture (PP), a posture in which the trunk was rotated 18° more backward (BP) and a posture in which it was rotated 15° more forward (FP) than in PP. Kinematics, ground reaction forces and electromyograms (EMG) were collected. EMG was rectified and smoothed to obtain smoothed rectified EMG (srEMG). Subjects showed adjustments in srEMG histories, most conspicuously a shift in srEMG-onset of rectus femoris (REC): from early in BP to late in FP. Jumps from the subjects' initial postures were simulated with a musculoskeletal model comprising four segments and six Hill-type muscles, which had muscle stimulation (STIM) over time as input. STIM of each muscle changed from initial to maximal at STIM-onset, and STIM-onsets were optimized using jump height as criterion. Optimal simulated jumps from BP, PP and FP were similar to jumps of the subjects. Optimal solutions primarily differed in STIM-onset of REC: from early in BP to late in FP. Because the subjects' adjustments in srEMG-onsets were similar to adjustments of the model's optimal STIM-onsets, it was concluded that the former were near-optimal. With the model we also showed that near-maximum jumps from BP, PP and FP could be achieved when STIM-onset of REC depended on initial hip joint angle and STIM-onsets of the other muscles were posture-independent. A control theory that relies on a mapping from initial posture to STIM-onsets seems a parsimonious alternative to theories relying on internal optimal control models. Copyright © 2013 IBRO. Published by Elsevier Ltd. All rights reserved.

Risk based technique for improving technical specifications

International Nuclear Information System (INIS)

Kim, I. S.; Jae, M. S.; Kim, B. S.; Hwang, S. W.; Kang, K. M.; Park, S. S.; Yu, Y. S.

2001-03-01

The objective of this study is to develop the systematic guidance for reviewing the documents associated with the changes of technical specifications. The work done in this fiscal year is the following : surveys in TS requirements, TS improvements and TS regulations in foreign countries as well as Korea, surveys on the state-of-the-art of RITSs and their use in Korea, development of a decision-making framework for both the licensee and the regulation agency, description of risk measures, assessment methodology on STI/AOT, and adverse effects caused by periodic maintenance, which are explained in appendix. The results of this study might contribute to enhancing the quality of the current technical specifications and contribute to preparing the risk informed regulation program using the decision-making framework developed in this study

Technical efficiency among the food crop farmers in Rivers State ...

African Journals Online (AJOL)

This study estimated technical efficiency and isolated determinants of technical inefficiency among food crop farmers in Rivers State, Nigeria. The data was collected with structured questionnaire from 180 food crop farmers randomly selected from 10 out of the 15 upland LGAs that make up Rivers State. A stochastic frontier ...

Non-technical skills in histopathology: definition and discussion.

Science.gov (United States)

Johnston, Peter W; Fioratou, Evie; Flin, Rhona

2011-09-01

Health care is a high-risk industry, with most documented adverse incidents being associated with 'human factors' including cognitive and social skills termed 'non-technical skills'. Non-technical skills complement the diagnostic and specialist skills and professional attributes required by medical practitioners, including histopathologists, and can enhance the quality of practice and delivery of health-care services and thus contribute to patient safety. This review aims to introduce histopathologists to non-technical skills and how these pertain to everyday histopathological practice. Drawing from other domains in medicine, specifically anaesthesia and surgery, a variety of non-technical skills are identified and described in the context of histopathology to illustrate the role each plays, often collectively, in daily practice. The generic non-technical skills are defined as situation awareness, decision-making, communication, teamwork, leadership, managing stress and coping with fatigue. Example scenarios from histopathology are presented and the contributions to outcomes made by non-technical skills are explained. Consideration of these specific non-technical skills as a component in histopathology training may benefit practitioners as well as assuring patient safety. © 2011 Blackwell Publishing Limited.

Decision-Making under Criteria Uncertainty

Science.gov (United States)

Kureychik, V. M.; Safronenkova, I. B.

2018-05-01

Uncertainty is an essential part of a decision-making procedure. The paper deals with the problem of decision-making under criteria uncertainty. In this context, decision-making under uncertainty, types and conditions of uncertainty were examined. The decision-making problem under uncertainty was formalized. A modification of the mathematical decision support method under uncertainty via ontologies was proposed. A critical distinction of the developed method is ontology usage as its base elements. The goal of this work is a development of a decision-making method under criteria uncertainty with the use of ontologies in the area of multilayer board designing. This method is oriented to improvement of technical-economic values of the examined domain.

A technical solution to a difficult problem - An update

International Nuclear Information System (INIS)

Asselstine, J.K.

1985-01-01

A goal of the Reduced Enrichment Research and Test Reactor Program (RERTR) established by the U.S. Department of Energy is to develop the technical means needed to utilize LEU instead of HEU fuels in research and test reactors and to do so without operational penalties and without affecting safety characteristics. This goal has been pursued now for seven years in cooperation with many of you who are participants in this conference. The program has made significant progress in the development, demonstration and application of new LEU research reactor fuels. According to recent projections, the percentage of HEU fuel in international commerce which is technically replaceable with LEU fuels has been growing steadily as research continues. There appears to be no technical barrier to eventual replacement of HEU fuel with LEU fuel in research and test reactors. While there are many politically complex and technically difficult issues involved in nonproliferation, I conclude that the use of highly enriched weapons grade uranium as a fuel in civilian research reactors stands out as one problem which has a straight forward technical solution. The technical solution is the effort you in the RERTR program are embarked on. Once that solution is in hand, the operators of research reactors are urged to take political and legal initiatives to make the conversion happen. By effecting this conversion they will help minimize the trade in highly enriched uranium and make the world a little safer

A technical solution to a difficult problem - An update

Energy Technology Data Exchange (ETDEWEB)

Asselstine, J K

1985-07-01

A goal of the Reduced Enrichment Research and Test Reactor Program (RERTR) established by the U.S. Department of Energy is to develop the technical means needed to utilize LEU instead of HEU fuels in research and test reactors and to do so without operational penalties and without affecting safety characteristics. This goal has been pursued now for seven years in cooperation with many of you who are participants in this conference. The program has made significant progress in the development, demonstration and application of new LEU research reactor fuels. According to recent projections, the percentage of HEU fuel in international commerce which is technically replaceable with LEU fuels has been growing steadily as research continues. There appears to be no technical barrier to eventual replacement of HEU fuel with LEU fuel in research and test reactors. While there are many politically complex and technically difficult issues involved in nonproliferation, I conclude that the use of highly enriched weapons grade uranium as a fuel in civilian research reactors stands out as one problem which has a straight forward technical solution. The technical solution is the effort you in the RERTR program are embarked on. Once that solution is in hand, the operators of research reactors are urged to take political and legal initiatives to make the conversion happen. By effecting this conversion they will help minimize the trade in highly enriched uranium and make the world a little safer.

Troubling Metaphors and International Student Adjustment: Reflections from a Transnational Place

OpenAIRE

David Starr-Glass

2017-01-01

On many campuses, offices of International Student Affairs address the perceived needs of international students. However, a number of underlying assumptions and persistent metaphors shape these efforts and influence their outcomes. All students are uniquely different and face equally different challenges in adjusting to higher education. Labeling students “international” may make institutional sense, but it can potentially hinder their transition, adjustment, and ultimate success. Applying r...

Worksite adjustments and work ability among employed cancer survivors.

Science.gov (United States)

Torp, Steffen; Nielsen, Roy A; Gudbergsson, Sævar B; Dahl, Alv A

2012-09-01

This study was conducted to determine how many cancer survivors (CSs) make worksite adjustments and what kinds of adjustments they make. Changes in work ability among employed CSs were explored, and clinical, sociodemographic, and work-related factors associated with the current total work ability were studied. CSs of the ten most common invasive types of cancer for men and women in Norway completed a mailed questionnaire 15-39 months after being diagnosed with cancer. Included in the analyses were all participants who worked both at the time of diagnosis and at the time of the survey and who had not changed their labor force status since diagnosis (n = 563). The current total work ability was compared to the lifetime best (0-10 score). Twenty-six percent of the employed CSs had made adjustments at work, and the most common adjustment was changing the number of work hours per week. Despite the fact that 31% and 23% reported reduced physical and mental work abilities, respectively, more than 90% of the CSs reported that they coped well with their work demands. The mean total work ability score was high (8.6) among both men and women. Being self-employed and working part-time at the time of diagnosis showed significant negative correlations with total work ability, while a favorable psychosocial work environment showed a significant positive correlation. CSs with low work ability were more often in contact with the occupational health service and also made more worksite adjustments than others. The prospects of future work life seem optimistic for Norwegian employed CSs who return to work relatively soon after primary treatment.

Electronic resource management practical perspectives in a new technical services model

CERN Document Server

Elguindi, Anne

2012-01-01

A significant shift is taking place in libraries, with the purchase of e-resources accounting for the bulk of materials spending. Electronic Resource Management makes the case that technical services workflows need to make a corresponding shift toward e-centric models and highlights the increasing variety of e-formats that are forcing new developments in the field.Six chapters cover key topics, including: technical services models, both past and emerging; staffing and workflow in electronic resource management; implementation and transformation of electronic resource management systems; the ro

Decision making regarding multifetal reduction.

Science.gov (United States)

Maifeld, Michelle; Hahn, Sandra; Titler, Marita G; Mullen, Meredithe

2003-01-01

To identify salient variables that influence decision making regarding multifetal reduction (MFR) and describe their effect on individuals over time. Prospective, exploratory, descriptive design, using qualitative and quantitative methods. Midwestern tertiary care center. A convenience sample of 11 consecutive consenting couples with triplet or higher-order pregnancies who elected to undergo MFR. Semistructured audiotaped telephone interviews at three points: (a) 2 weeks postreduction, (b) 6 weeks postpartum, and (c) 6 months postpartum; a demographic and marital adjustment questionnaire. Themes identified by content analysis and compared via matrix analysis between males and females and at three points in time; trends in marital adjustment. Dominant variables influencing MFR decision making were risks associated with higher-order pregnancies and preservation of infants' and mothers' health. Most participants identified emotional issues, including moral and ethical dilemmas, as the most difficult aspect of reduction. Over time, participants reported feeling more positive about their decision; nonetheless, negative feelings emerged progressively. Risk aversion favored MFR decision making. Yet, both making and living with the decision were emotionally difficult for this sample. Interventions are needed to assist couples with this decision and its consequences.

Adding Realism to Technical Drafting Programs

Science.gov (United States)

Weaver, Gerald L.

1976-01-01

Suggestions for improved, relevant technical drafting programs are presented: (1) making realistic assignments, (2) viewing real projects, (3) duplicating industrial projects, (4) practicing lettering, (5) conducting research, (6) engaging in teamwork, (7) adapting to change, (8) learning to meet deadlines, and (9) stressing the importance of…

Synthetic biology and the technicity of biofuels.

Science.gov (United States)

Mackenzie, Adrian

2013-06-01

The principal existing real-world application of synthetic biology is biofuels. Several 'next generation biofuel' companies-Synthetic Genomics, Amyris and Joule Unlimited Technologies-claim to be using synthetic biology to make biofuels. The irony of this is that highly advanced science and engineering serves the very mundane and familiar realm of transport. Despite their rather prosaic nature, biofuels could offer an interesting way to highlight the novelty of synthetic biology from several angles at once. Drawing on the French philosopher of technology and biology Gilbert Simondon, we can understand biofuels as technical objects whose genesis involves processes of concretisation that negotiate between heterogeneous geographical, biological, technical, scientific and commercial realities. Simondon's notion of technicity, the degree of concretisation of a technical object, usefully conceptualises this relationality. Viewed in terms of technicity, we might understand better how technical entities, elements, and ensembles are coming into being in the name of synthetic biology. The broader argument here is that when we seek to identify the newness of disciplines, their newness might be less epistemic and more logistic. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Cooperation in a dynamical adjustment of duopoly game with incomplete information

International Nuclear Information System (INIS)

Ding Zhanwen; Shi Guiping

2009-01-01

In the output competition of Cournot game, the adjustment of output is considered under the circumstances that participants have incomplete information. In this paper, two strategies with output's adjustment are mainly discussed: the tit-for-tat strategy and the tit-for-tat strategy with cooperative intention and their dynamic systems, respectively. The result shows that the tit-for-tat strategy may lead to the cooperation of them, but the stability of adjustment system is sensitive to the parameters; while the tit-for-tat strategy with cooperative intention can make the Pareto Optimality stable within the parameters' certain scope.

Dynamic adjustments of cognitive control during economic decision making.

Science.gov (United States)

Soutschek, Alexander; Schubert, Torsten

2014-10-01

Decision making in the Ultimatum game requires the resolution of conflicts between economic self-interest and fairness intuitions. Since cognitive control processes play an important role in conflict resolution, the present study examined how control processes that are triggered by conflicts between fairness and self-interest in unfair offers affect subsequent decisions in the Ultimatum game. Our results revealed that more unfair offers were accepted following previously unfair, compared to previously fair offers. Interestingly, the magnitude of this conflict adaptation effect correlated with the individual subjects' focus on economic self-interest. We concluded that conflicts between fairness and self-interest trigger cognitive control processes, which reinforce the focus on the current task goal. Copyright © 2014 Elsevier B.V. All rights reserved.

Price adjustment clauses with seal of quality. Regal verification; Preisanpassungsklauseln mit 'Guetesiegel'. Rechtliche Ueberpruefung

Energy Technology Data Exchange (ETDEWEB)

Donner, Oliver; Ottersbach, Joerg [BET Buero fuer Energiewirtschaft und Technische Planung GmbH, Aachen (Germany); Thomale, Hans-Christoph [FPS Rechtsanwaelte und Notare, Frankfurt am Main (Germany)

2013-03-11

Actually, district heating suppliers see themselves to be exposed to the general suspicion of the claim of increased prices from their customers. Partly, the existing price adjustment clauses really do not correspond to the legal requirements. This often was complaint by the customers, and resulted in legal disputes. Under this aspect, the BET bureau for energy industry and technical planning GmbH (Aachen, Federal Republic of Germany) and FPS Attorney/Notaries (Berlin, Federal Republic of Germany) analyse and develop price models with price adjustment clauses in order to meet the resulting, often considerable risks.

The role of technical progress in the process of recalculating oil reserves

International Nuclear Information System (INIS)

Boulard, J.N.

1999-01-01

Contrary to the concept of resources (which is essentially a geological one), the notion of reserves designates the quantities that are technically and economically recoverable. Beyond the production-related effect, the reserves therefore evolve over time in accordance with numerous technical and economic parameters. Among these parameters, it can be seen that technical progress plays a considerable role throughout the process of converting resources into reserves, including progress in the identification, accessibility and processing of the resources, and improvements in economic viability. After having tackled the problem of measuring the 'technical progress effects' and citing examples, we demonstrate that the evolution in oil reserves is subject to three types of impact. These are a quantitative impact by significantly improving the recovery rates or making it possible to identify hitherto undetectable oil fields, a qualitative impact by widening the resource base thanks to the adoption of new categories of oil (in particular the so-called 'unconventional' oils) and by carrying out the gradual substitution between these resources of differing qualities. There is also a dynamic impact, through the acceleration of resource availability. Through these three approaches, technical progress makes makes it possible to ensure continuity in oil supply and contributes significantly to the recalculation of reserves. It therefore acts as a compensating factor, counterbalancing the progressive depletion of resources. (author)

Adjustment Criterion and Algorithm in Adjustment Model with Uncertain

Directory of Open Access Journals (Sweden)

SONG Yingchun

2015-02-01

Full Text Available Uncertainty often exists in the process of obtaining measurement data, which affects the reliability of parameter estimation. This paper establishes a new adjustment model in which uncertainty is incorporated into the function model as a parameter. A new adjustment criterion and its iterative algorithm are given based on uncertainty propagation law in the residual error, in which the maximum possible uncertainty is minimized. This paper also analyzes, with examples, the different adjustment criteria and features of optimal solutions about the least-squares adjustment, the uncertainty adjustment and total least-squares adjustment. Existing error theory is extended with new observational data processing method about uncertainty.

Palisades technical specification conversion from custom to new industry standard

International Nuclear Information System (INIS)

Foley, D.J.; Young, B.

1990-01-01

Consumers Power Company's (CPCo) Palisades plant is in the process of converting from custom technical specifications to the new industry standard, Restructured Standard Technical Specifications (RSTS). Custom technical specifications were the precursor to standard technical specifications, being issued to plants built prior to 1972. In May 1989, each of the four light water reactor owners' groups completed topical reports presenting their version of Restructured Standard Technical Specifications to the Nuclear Regulatory Commission (NRC). After approval of the owners' groups versions of the RSTs by the NRC, individual operating reactors will begin to make the conversion to the RSTS. Each owners' group has designated a lead plant, which will be the first of that vendor type to convert. All of the lead plants currently operate under standard technical specifications. The content of the RSTS was determined by comparing the standard technical specifications with selection criteria specified in the Commissions Interim Policy Statement

Use of "t"-Test and ANOVA in Career-Technical Education Research

Science.gov (United States)

Rojewski, Jay W.; Lee, In Heok; Gemici, Sinan

2012-01-01

Use of t-tests and analysis of variance (ANOVA) procedures in published research from three scholarly journals in career and technical education (CTE) during a recent 5-year period was examined. Information on post hoc analyses, reporting of effect size, alpha adjustments to account for multiple tests, power, and examination of assumptions…

Technical efficiency of FDI firms in the Vietnamese manufacturing sector

Directory of Open Access Journals (Sweden)

Vu Hoang Duong

2016-09-01

Full Text Available The study examines technical efficiency of Foreign Direct Investment (FDI firms in the Vietnamese manufacturing sector by applying stochastic production frontier model and making use of cross-sectional data in the period 2009-2013. The average level of technical efficiency of FDI firms is about 60% and it is higher than that of domestic firms (including private firms and state-owned firms. In addition, the study also analyses correlation between technical efficiency of FDI firms and other factors. It finds that there are positive correlations between FDI technical efficiency and net revenue per labour, firm’s age or export activities in 2013. However, the study is unable to find evidence of a relationship between FDI technical efficiency and infrastructure or firm’s investment activities.

Improved Conjugate Gradient Bundle Adjustment of Dunhuang Wall Painting Images

Science.gov (United States)

Hu, K.; Huang, X.; You, H.

2017-09-01

Bundle adjustment with additional parameters is identified as a critical step for precise orthoimage generation and 3D reconstruction of Dunhuang wall paintings. Due to the introduction of self-calibration parameters and quasi-planar constraints, the structure of coefficient matrix of the reduced normal equation is banded-bordered, making the solving process of bundle adjustment complex. In this paper, Conjugate Gradient Bundle Adjustment (CGBA) method is deduced by calculus of variations. A preconditioning method based on improved incomplete Cholesky factorization is adopt to reduce the condition number of coefficient matrix, as well as to accelerate the iteration rate of CGBA. Both theoretical analysis and experimental results comparison with conventional method indicate that, the proposed method can effectively conquer the ill-conditioned problem of normal equation and improve the calculation efficiency of bundle adjustment with additional parameters considerably, while maintaining the actual accuracy.

Woman Professors Pressing to Close Salary Gap; Some Colleges Adjust Pay, Others Face Lawsuits.

Science.gov (United States)

McMillen, Liz

1987-01-01

The institutions making efforts to study and change faculty salary disparities for men and women are finding that determining what constitutes a fair salary review and adjustment is difficult. Other institutions are resisting making changes. (MSE)

Depression, Anxiety, Stress, and Adjustments among Malaysian Gifted Learners: Implication towards School Counseling Provision

Science.gov (United States)

Abu Bakar, Abu Yazid; Ishak, Noriah Mohd

2014-01-01

Gifted learners have special characteristics which make them unique individuals. However, just like their normative group, gifted learners experience some psychological issues that hinder their ability to adjust in new environments. This study aims to examine levels of depression, anxiety, stress, and adjustments (psychological, social and…

Adjusting ability and sensibility in case of an accident

Energy Technology Data Exchange (ETDEWEB)

Rozental, J.J. [Tel Aviv Univ. (Israel)

1997-12-31

Adjusting ability (technical competence) and sensibility (consciousness) are the two most import tasks that any staff member, part of any organization, should realize while acting during a nuclear or radiological emergency. These two tasks are commented and the necessity to promote organizational capacity to achieve the Safety Objectives Principles of Nuclear Installations and the Safety of Radiation sources is reported. The improvement of the quality of safety and radiation projects to control the uses of radioactive material in the field of medicine, agriculture, industry and research is highlighted 11 refs.; e-mail: josrozen at netvision.net.il

Adjustable Tooling for Bending Brake

Science.gov (United States)

Ellis, J. M.

1986-01-01

Deep metal boxes and other parts easily fabricated. Adjustable tooling jig for bending brake accommodates spacing blocks and either standard male press-brake die or bar die. Holds spacer blocks, press-brake die, bar window die, or combination of three. Typical bending operations include bending of cut metal sheet into box and bending of metal strip into bracket with multiple inward 90 degree bends. By increasing free space available for bending sheet-metal parts jig makes it easier to fabricate such items as deep metal boxes or brackets with right-angle bends.

Technical efficiency of women's health prevention programs in Bucaramanga, Colombia: a four-stage analysis.

Science.gov (United States)

Ruiz-Rodriguez, Myriam; Rodriguez-Villamizar, Laura A; Heredia-Pi, Ileana

2016-10-13

Primary Health Care (PHC) is an efficient strategy to improve health outcomes in populations. Nevertheless, studies of technical efficiency in health care have focused on hospitals, with very little on primary health care centers. The objective of the present study was to use the Data Envelopment Analysis to estimate the technical efficiency of three women's health promotion and disease prevention programs offered by primary care centers in Bucaramanga, Colombia. Efficiency was measured using a four-stage data envelopment analysis with a series of Tobit regressions to account for the effect of quality outcomes and context variables. Input/output information was collected from the institutions' records, chart reviews and personal interviews. Information about contextual variables was obtained from databases from the primary health program in the municipality. A jackknife analysis was used to assess the robustness of the results. The analysis was based on data from 21 public primary health care centers. The average efficiency scores, after adjusting for quality and context, were 92.4 %, 97.5 % and 86.2 % for the antenatal care (ANC), early detection of cervical cancer (EDCC) and family planning (FP) programs, respectively. On each program, 12 of the 21 (57.1 %) health centers were found to be technically efficient; having had the best-practice frontiers. Adjusting for context variables changed the scores and reference rankings of the three programs offered by the health centers. The performance of the women's health prevention programs offered by the centers was found to be heterogeneous. Adjusting for context and health care quality variables had a significant effect on the technical efficiency scores and ranking. The results can serve as a guide to strengthen management and organizational and planning processes related to local primary care services operating within a market-based model such as the one in Colombia.

TECHNICAL EFFICIENCY AND TECHNICAL LEVEL INDICATORS APPLICATION FOR CIVIL AIRCRAFT FUNCTIONAL PROPERTIES ANALYSIS

Directory of Open Access Journals (Sweden)

Vadim V. Efimov

2018-01-01

Full Text Available Functional properties characterize the purpose of the aircraft and are described by its flight performance characteristics such as range and cruising speed, payload, runway characteristics, etc. Functional properties also characterize the aircraft efficiency that determines the objective need for their analysis by both aircraft designers and operators in conditions of permanent and systematic efficiency increase necessity. When choosing the aircraft, it is important for the operator to make sure that a selected aircraft type has a high level of functional properties, which will allow it to provide high operational efficiency without obsolescence in the long term. However, when choosing from several aircraft types the operator has to face the fact that some characteristics of considered aircraft variants are better and the others are worse that does not allow to definitely determine what aircraft type has a higher level of functional properties.The possibility of applying technical efficiency indicators and a generalized technical level indicator for analyzing the functional properties of civil aviation aircraft is explored in this article. Fuel, weight and target efficiency values as well as the previously improved technical level indicator value were calculated for the different generations and modifications of Boeing 737 and Airbus A320 families of medium-range airplanes, which was followed by the results interpretation within one airplane generation and when moving historically from one airplane generation to another. According to analysis results it is concluded that it is impossible to define the change of the aircraft functional properties level by the change in the values of separate technical efficiency indicators. Thus, it is proposed to use a generalized technical level indicator that determines the level of aircraft technical perfection for purpose and to use efficiency indicators to analyze the cost of providing this level of

75 FR 9964 - Order Making Fiscal Year 2010 Mid-Year Adjustment to the Fee Rates Applicable Under Sections 31(b...

Science.gov (United States)

2010-03-04

... of x. 3. Calculate the mean and standard deviation of the series {[Delta] 1 , [Delta] 2...(j)(2) of the Exchange Act requires the Commission to issue an order adjusting the fee rates under... Adjusted Rate Section 31(j)(4)(B) of the Exchange Act provides that a mid-year adjustment shall take effect...

Strengthening the material-technical base of modern agrarian ...

African Journals Online (AJOL)

At present, in agriculture there is a tendency of equipment obsolescence and break ... by means of acquisition of high-energy, high-performance equipment and the ... and to make recommendations for the development of technical capacity.

Significance of technical rules for environmental pollution control

International Nuclear Information System (INIS)

Grefen, K.

1989-01-01

Technical rules for environmental pollution control are very important in times of intensified technical progress and especially in view of the alterations of the legislative basis of the European Market in 1992. In the fields of jurisprudence, science and technology they serve as a decision-making aid for authorities, specialists in plant development and operation and the preparatory stages of international legislation. The topic is explained by the development of guidelines with the VDI-Commission on Air Pollution Prevention. (orig.) [de

Technical and Management Information System (TMIS)

Science.gov (United States)

Rau, Timothy R.

1987-01-01

The TMIS goals developed to support the Space Station Program (SSP) mission requirements are outlined. The TMIS will provide common capabilities to all SSP centers and facilitate the flow of technical and management information throughout the program as well as SSP decision-making processes. A summary is presented of the various TMIS phases.

Technical solutions to make biofuels more competitive

International Nuclear Information System (INIS)

Anon.

2006-01-01

With the present day environmental and economical stakes, the French government has announced in 2005 a plan for the accelerated development of biofuels. In France, two traditional ways of biofuel generation exist: the bio-ethanol way and the bio-diesel way (methyl esters of vegetable oils). Two problems limit today the development of biofuels: the available cultivation surfaces and the production costs. The challenge of the next generation of biofuels concerns the better use of the available biomass, with no competition with the food productions, and in particular the development of ethyl esters of vegetable oils or the hydrogen processing of vegetable oils. Other processes are making their way, like the biomass to liquid (BTL) process, based on the Fischer-Tropsch synthesis, which allows to convert any type of biomass source into liquid fuels with a high production rate (about 5000 l/Ha). Short paper. (J.S.)

Quality-adjusted life-years. Ethical implications for physicians and policymakers.

Science.gov (United States)

La Puma, J; Lawlor, E F

1990-06-06

Quality-adjusted life-years have been used in economic analyses as a measure of health outcomes, one that reflects both lives saved and patients' valuations of quality of life in alternative health states. The concept of "cost per quality-adjusted life year" as a guideline for resource allocation is founded on six ethical assumptions: quality of life can be accurately measured and used, utilitarianism is acceptable, equity and efficiency are compatible, projections of community preferences can substitute for individual preferences, the old have less "capacity to benefit" than the young, and physicians will not use quality-adjusted life-years as clinical maxims. Quality-adjusted life-years signal two shifts in the locus of control and the nature of the clinical encounter: first, formal expressions of community preferences and societal usefulness would counterbalance patient autonomy, and second, formal tools of resource allocation and applied decision analysis would counterbalance the use of clinical judgment. These shifts reflect and reinforce a new financial ethos in medical decision making. Presently using quality-adjusted life-years for health policy decisions is problematic and speculative; using quality-adjusted life-years at the bedside is dangerous.

IMPROVED CONJUGATE GRADIENT BUNDLE ADJUSTMENT OF DUNHUANG WALL PAINTING IMAGES

Directory of Open Access Journals (Sweden)

K. Hu

2017-09-01

Full Text Available Bundle adjustment with additional parameters is identified as a critical step for precise orthoimage generation and 3D reconstruction of Dunhuang wall paintings. Due to the introduction of self-calibration parameters and quasi-planar constraints, the structure of coefficient matrix of the reduced normal equation is banded-bordered, making the solving process of bundle adjustment complex. In this paper, Conjugate Gradient Bundle Adjustment (CGBA method is deduced by calculus of variations. A preconditioning method based on improved incomplete Cholesky factorization is adopt to reduce the condition number of coefficient matrix, as well as to accelerate the iteration rate of CGBA. Both theoretical analysis and experimental results comparison with conventional method indicate that, the proposed method can effectively conquer the ill-conditioned problem of normal equation and improve the calculation efficiency of bundle adjustment with additional parameters considerably, while maintaining the actual accuracy.

Designing Second Language Performance Assessments. Technical Report.

Science.gov (United States)

Norris, John M.; Brown, James Dean; Hudson, Thom; Yoshioka, Jim

This technical report focuses on the decision-making potential provided by second language performance assessments. First, performance assessment is situated within the broader discussion of alternatives in language assessment and in educational assessment in general. Next, issues in performance assessment design, implementation, reliability, and…

Social risk assessment of large technical systems

NARCIS (Netherlands)

Pasman, H.J.; Vrijling, J.K.

2003-01-01

A probabilistic approach to engineering advances. Since risk adhering to a technical structure can be determined quantitatively easier and more accurately than before, criteria for decision making are becoming more important. If the structure is in the public domain, and benefits are not felt, the

Convexity Adjustments

DEFF Research Database (Denmark)

M. Gaspar, Raquel; Murgoci, Agatha

2010-01-01

A convexity adjustment (or convexity correction) in fixed income markets arises when one uses prices of standard (plain vanilla) products plus an adjustment to price nonstandard products. We explain the basic and appealing idea behind the use of convexity adjustments and focus on the situations...

Technical expertise in the decision process - some comparative observations

International Nuclear Information System (INIS)

Wynne, B.

1987-01-01

The Sizewell-B public Inquiry aimed to be a 'full, fair and thorough' examination of all the facts. This could not really be achieved because the economic and safety cases cannot be exhaustively and definitively analysed. Technical examination cannot resolve these issues - only political commitment and history can, in time. This problem of uncertainties in the decision making process is discussed in detail, indicating the difficulties with large-scale public inquiries such as that for Sizewell-B. Analysis of many case studies of decision making indicates two generalisations. The first is that commitments made on the basis of values or political interests are represented as if they were the inevitable result of economic logic or scientific law. The second is that expert disagreement over technical claims is widely believed to be caused by lack of vigour, competance or impartiality on one side or the other. Recommendations for improving the decision-making process are made. (U.K.)

Minutes of the IFMIF technical meetings, May 17-20, 2005, Tokyo, Japan

International Nuclear Information System (INIS)

Ida, Mizuho; Nakamura, Hiroo; Yutani, Toshiaki; Maebara, Sunao; Umetsu, Tomotake; Sugimoto, Masayoshi

2005-08-01

The International Fusion Materials Irradiation Facility (IFMIF) Technical Meetings were held on May 17-20, 2005 at Japan Atomic Energy Research Institute (JAERI) Tokyo. The main objectives were 1) to review technical status of the subsystems; accelerator, target and test facilities, 2) to technically discuss interface issues between target and test facilities, 3) to review results of peer-reviews performed in the EU and Japan, 4) to harmonize design/experimental activities among the subsystems, 5) to review and discuss the Engineering Validation and Engineering Design Activity (EVEDA) tasks, and 6) to make a report of 1) - 5) to the IFMIF Executive Subcommittee. This report presents a brief summary of the Target Technical, Meeting, Test Facilities Technical Meeting, Target/Test Facilities Interface Meeting, Accelerator Technical Meeting and the Technical Integration Meeting. (author)

Opportunity to reduce the exhaust gases with engine adjust

International Nuclear Information System (INIS)

Dimitrovski, Mile; Mucevski, Kiril

2002-01-01

According to statistics in the Republic of Macedonia, the number of old vehicles is about 90%. These are vehicles produced between 1975 and 1990 with classical systems for forming and burning the fuel mixture. The most of them do not have system for processing exhaust gases (catalytic converter) and are serious air pollutants of carbon monoxide (CO). In this article we try to make an attempt to reduce exhaust gases in some kinds of these vehicles with adjusting to the system for burning fuel mixture and with adjusting to the system for forming fuel mixture (carburetor). At the same time the changes on the rotate bending moment and engine power are followed. It is noticed that with a proper adjustment the emission of exhaust gases can be reduced without a serious depreciation of the rotate bending moment and the engine power. (Author)

Survey on the Technology Readiness Level of R and D projects for a Technical Risk Management

International Nuclear Information System (INIS)

Song, S. J.; Chang, J.; Lee, K. Y.

2008-01-01

The purpose of applying the Technology Readiness Level/Design Readiness Level (TRL/DRL) in technical risk management is to make technology assessments, and improve communication among researchers with a consistent, systematic technology readiness Technical risk management for the Nuclear Hydrogen Production project was adopted of experience assessed with Delphi Method from the Next Generation Nuclear Plant(NGNP)of the DOE to improve the poor contactor management of the major projects which experienced cost increases and/or schedule delays in long-term. In the current phase that is doing key technology research and development projects, the technology readiness level was reviewed and applied to the Nuclear Hydrogen Production project to prepare an input for the next design phases. Based on the previous works, pre-conceptional design and key R and D works for the Nuclear Hydrogen Design and Development(NHDD) projects and the results of key research and development projects, the TRL was applied to assess the levels and compared with the advanced design stages of Westinghouse Electric Co. With this process, several issues were identified to apply the design and technology level to the familiar steps of design process and research and development projects. In order to resolve these issues, it is needed to systematically adjust and modify the current process with TRLs

Reader-Centered Technical Writing

Science.gov (United States)

Narayanan, M.

2012-12-01

Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into

Job adjustment as a means to reduce sickness absence during pregnancy.

Science.gov (United States)

Strand, K; Wergeland, E; Bjerkedal, T

1997-10-01

This study examined the effect of job adjustment on sickness absence during pregnancy and also determined the conditions under which such adjustments are obtained. Data were derived from a nationally representative survey on work conditions during pregnancy in Norway in 1989. For employees (N = 2713) remaining in the same job throughout pregnancy, the percentage of women on sick leave immediately before delivery was determined according to the need for job adjustment and the obtainment of job adjustment. Those obtaining job adjustment were grouped according to workplace size, labor-market sector, co-worker gender, educational level, work schedules, weekly workhours, children under 16 years of age in the household, and age. All told, 1691 women (62.3%) needed job adjustment, among whom 936 (55.4%) obtained such adjustment. The proportions of those on sick leave before delivery were 45.2% for "no need", 67.9% for "need - adjustment obtained", and 79.2% for "need - adjustment not obtained". In the last category, the difference (versus "adjustment obtained") constituted 44.5% of the weeks lost because of sickness absence in the last half of pregnancy. The odds ratio (OR) for obtaining job adjustment was larger for workplaces with more than 50 employees (OR 1.4) and smaller for jobs with work schedules other than daytime or shift work (OR 0.5) and also for women living with children under 16 years of age (OR 0.8). Job adjustment is associated with reduced sickness absence during pregnancy. Further studies should explore workplace characteristics that make it difficult to obtain such adjustments, as required by law.

Decision making in matters of pollution in France

International Nuclear Information System (INIS)

Galle, Marion

1989-01-01

Decision making in matters of pollution, although taking place in a hierarchically determined institutional setting, can be interpreted as the result of a conflictual process between the different groups involved. 1. The statutory setting: coherence of laws and adaptability of norms; a hierarchical, pyramidal, formal structure; relative autonomy and flexibility of local decision making: possibility of developing local organizations for the control of pollution. 2. The conflictual process: Within the institutional setting, decision making is the result of interaction between: the state and the authorities, who make the rules and possess the formal power; industry, which has the economic power and is the arbiter of technical feasibility; the public, who are guardians of social values and judges of the acceptability of final decisions; the experts, who possess the scientific knowledge on which decisions are based. The relative weights of these different interests in decision making are linked with the existence of today's society of communication which increases the importance of communicators and especially the media. Conclusion: decision making in questions of environmental risk and pollution necessarily consists in taking into account all the interests involved in order to arrive at a solution acceptable to the public. The interests of society are not necessarily compatible with technical or scientific logic. (author)

The general technical regulation and the standardization

International Nuclear Information System (INIS)

Laverie, Michel; Houze, Christian; Lebouleux, Philippe

1980-01-01

Through a certain number of procedures, the thorough appreciation of the safety of a nuclear installation relies more on a specific appreciation taking into account the references as a whole, than on a technical regulation which claims to cover all the problems. Nevertheless, a French technical regulation structure regarding the safety domain must be built up progressively. The authors consider the principles of such a structure, and together they make the inventory of the works, finished, in progress or contemplated. The description of this specifically French approach emphazises the multiple and complementary forms given to statutory implements [fr

Framework for technical assessment in JR Maglev

Energy Technology Data Exchange (ETDEWEB)

Seki, Akio [Central Japan Railway Co., Tokyo (Japan); Akahoshi, Toru [Central Japan Railway Co., Tokyo (Japan); Furuki, Tsutomu [Railway Technical Research Inst., Tokyo (Japan)

1995-12-31

In the course of development of JR Maglev, various technical assessments are carried out at each stage of development by a system management group of a project team in order to achieve goals of development. For the purpose, guidelines for practicality assessment were prepared at design stage. It is now striven to make test plans necessary for the practicality assessment. This assessment will serve for those to be ultimately implemented by Ministry of Transport (MOT). This paper presents an overview of concepts, methods and procedures of the technical assessments especially focused on the practicality assessment in the development of JR Maglev. (orig.)

Fuel cycle options for light water reactors and heavy water reactors. Proceedings of a technical committee meeting

International Nuclear Information System (INIS)

1999-11-01

In the second half of the 20th century nuclear power has evolved from the research and development environment to an industry that supplies 16% of the world's electricity. By the end of 1997, over 8500 reactor-years of operating experience had been accumulated. Global environmental change, and the continuing increase in global energy supply required to provide increasing populations with an improving standard of living, make the contribution from nuclear energy even more important for the next century. For nuclear power to achieve its full potential and make its needed contribution, it must be safe, economical, reliable and sustainable. All of these factors can be enhanced by judicious choice and development of advanced fuel cycle options. The Technical Committee Meeting (TCM) on Fuel Cycle Options for Light Water Reactors and Heavy Water Reactors was hosted by Atomic Energy of Canada Limited (AECL) on behalf of the Canadian Government and was jointly conducted within the frame of activities of the IAEA International Working Group on Advanced Technologies for Light Water Reactors (IWG-LWR) and the IAEA International Working Group on Advanced Technologies for Heavy Water Reactors (IWG-HWR). The TCM provided the opportunity to have in-depth discussions on important technical topics which were highlighted in the International Symposium on Nuclear Fuel Cycle and Reactor Strategies: Adjusting to New Realities, held in Vienna, 3-6 June 1997. The main results and conclusions of the TCM were presented as input for discussion at the first meeting of the IAEA newly formed International Working Group on Fuel Cycle Options

Non-technical skills of the operating theatre scrub nurse: literature review.

Science.gov (United States)

Mitchell, Lucy; Flin, Rhona

2008-07-01

This paper is a report of a review to identify the non-technical (cognitive and social) skills used by scrub nurses. Recognition that failures in non-technical skills contributed to accidents in high-risk industries led to the development of research programmes to study the role of cognition and social interactions in operational safety. Recently, psychological research in operating theatres has revealed the importance of non-technical skills in safe and efficient performance. Most of the studies to date have focused on anaesthetists and surgeons. On-line sources and university library catalogues, publications of the Association for Perioperative Practice, National Association of Theatre Nurses and Association of Peri-Operative Registered Nurses were searched in 2007. Studies were included in the review if they presented data from scrub nurses on one or more of their non-technical skills. These findings were examined in relation to an existing medical non-technical skills framework with categories of communication, teamwork, leadership, situation awareness and decision-making. Of 424 publications retrieved, 13 were reviewed in detail. Ten concerned communication and eight of those also had data on teamwork. In 11 papers teamwork was examined, and one focused on nurses' situation awareness, teamwork and communication. None of the papers we reviewed examined leadership or decision-making by scrub nurses. Further work is needed to identify formally the non-technical skills which are important to the role of scrub nurse and then to design training in the identified non-technical skills during the education and development of scrub nurses.

Making Invisible Histories Visible

Science.gov (United States)

Hanssen, Ana Maria

2012-01-01

This article features Omaha Public Schools' "Making Invisible Histories Visible" program, or MIHV. Omaha's schools have a low failure rate among 8th graders but a high one among high school freshmen. MIHV was created to help at-risk students "adjust to the increased demands of high school." By working alongside teachers and…

Technical specifications for mechanical recycling of agricultural plastic waste

International Nuclear Information System (INIS)

Briassoulis, D.; Hiskakis, M.; Babou, E.

2013-01-01

Highlights: • Technical specifications for agricultural plastic wastes (APWs) recycling proposed. • Specifications are the base for best economical and environmental APW valorisation. • Analysis of APW reveals inherent characteristics and constraints of APW streams. • Thorough survey on mechanical recycling processes and industry as it applies to APW. • Specifications for APW recycling tested, adjusted and verified through pilot trials. - Abstract: Technical specifications appropriate for the recycling of agricultural plastic wastes (APWs), widely accepted by the recycling industry were developed. The specifications establish quality standards to be met by the agricultural plastics producers, users and the agricultural plastic waste management chain. They constitute the base for the best economical and environmental valorisation of the APW. The analysis of the APW streams conducted across Europe in the framework of the European project “LabelAgriWaste” revealed the inherent characteristics of the APW streams and the inherent constraints (technical or economical) of the APW. The APW stream properties related to its recycling potential and measured during pilot trials are presented and a subsequent universally accepted simplified and expanded list of APW recycling technical specifications is proposed and justified. The list includes two sets of specifications, applied to two different quality categories of recyclable APW: one for pellet production process (“Quality I”) and another one for plastic profile production process (“Quality II”). Parameters that are taken into consideration in the specifications include the APW physical characteristics, contamination, composition and degradation. The proposed specifications are focused on polyethylene based APW that represents the vast majority of the APW stream. However, the specifications can be adjusted to cover also APW of different materials (e.g. PP or PVC) that are found in very small quantities

Humans make near-optimal adjustments of control to initial body configuration in vertical squat jumping

NARCIS (Netherlands)

Bobbert, M.F.; Casius, L.J.R.; Kistemaker, D.A.

2013-01-01

We investigated adjustments of control to initial posture in squat jumping. Eleven male subjects jumped from three initial postures: preferred initial posture (PP), a posture in which the trunk was rotated 18° more backward (BP) and a posture in which it was rotated 15° more forward (FP) than in PP.

76 FR 26324 - Order Making Fiscal Year 2012 Annual Adjustments to Section 31 Fee Rates

Science.gov (United States)

2011-05-06

... of x. 3. Calculate the mean and standard deviation of the series {[Delta] 1 , [Delta] 2... 2012 Annual Adjustments to Section 31 Fee Rates I. Background Section 31 of the Securities Exchange Act... the fee rates under Sections 31(b) and (c) of the Exchange Act in fiscal years 2002 through 2011. II...

Orthogonally Evolved AI to Improve Difficulty Adjustment in Video Games

DEFF Research Database (Denmark)

Hintze, Arend; Olson, Randal; Lehman, Joel Anthony

2016-01-01

Computer games are most engaging when their difficulty is well matched to the player's ability, thereby providing an experience in which the player is neither overwhelmed nor bored. In games where the player interacts with computer-controlled opponents, the difficulty of the game can be adjusted...... not only by changing the distribution of opponents or game resources, but also through modifying the skill of the opponents. Applying evolutionary algorithms to evolve the artificial intelligence that controls opponent agents is one established method for adjusting opponent difficulty. Less-evolved agents...... (i.e. agents subject to fewer generations of evolution) make for easier opponents, while highly-evolved agents are more challenging to overcome. In this publication we test a new approach for difficulty adjustment in games: orthogonally evolved AI, where the player receives support from collaborating...

Access to water: Technical and social solutions help communities ...

International Development Research Centre (IDRC) Digital Library (Canada)

2010-12-08

Dec 8, 2010 ... English · Français ... Access to water: Technical and social solutions help communities make the most of ... IDRC-supported research engages communities, and countries, in developing durable solutions to water problems.

Factors associated with oncology patients' involvement in shared decision making during chemotherapy.

Science.gov (United States)

Colley, Alexis; Halpern, Jodi; Paul, Steven; Micco, Guy; Lahiff, Maureen; Wright, Fay; Levine, Jon D; Mastick, Judy; Hammer, Marilyn J; Miaskowski, Christine; Dunn, Laura B

2017-11-01

Oncology patients are increasingly encouraged to play an active role in treatment decision making. While previous studies have evaluated relationships between demographic characteristics and decision-making roles, less is known about the association of symptoms and psychological adjustment characteristics (eg, coping styles and personality traits) and decision-making roles. As part of a larger study of symptom clusters, patients (n = 765) receiving chemotherapy for breast, gastrointestinal, gynecological, or lung cancer provided information on demographic, clinical, symptom, and psychological adjustment characteristics. Patient-reported treatment decision-making roles (ie, preferred role and role actually played) were assessed using the Control Preferences Scale. Differences among patients, who were classified as passive, collaborative, or active, were evaluated using χ 2 analyses and analyses of variance. Over half (56.3%) of the patients reported that they both preferred and actually played a collaborative role. Among those patients with concordant roles, those who were older, those with less education and lower income, and those who were less resilient were more likely to prefer a passive role. Several psychological adjustment characteristics were associated with decision-making role, including coping style, personality, and fatalism. Oncology patients' preferences for involvement in treatment decision making are associated with demographic characteristics as well as with symptoms and psychological adjustment characteristics, such as coping style and personality. These results reaffirm the complexities of predicting patients' preferences for involvement in decision making. Further study is needed to determine if role or coping style may be influenced by interventions designed to teach adaptive coping skills. Copyright © 2016 John Wiley & Sons, Ltd.

Technical note The formulation of synthetic domestic wastewater ...

African Journals Online (AJOL)

Technical note The formulation of synthetic domestic wastewater sludge medium to study anaerobic biological treatment of acid mine drainage in the laboratory. ... Journal Home > Vol 42, No 2 (2016) > ... Domestic wastewater sludge is however highly variable in its composition, making laboratory experimentation difficult.

Improving technical information use: what can be learnt from a manager's perspective?

Science.gov (United States)

Jacobson, C; Lisle, A; Carter, R W; Hockings, M T

2013-07-01

Conservation practice reportedly suffers from low use of technical information. Understanding of factors that affect the influence of technical information on management decision-making is limited. We sought to identify leverage points for improved technical information dissemination in the New South Wales Parks and Wildlife Service, Australia, given the significant recent investments in monitoring and evaluation that had been made. We did so by exploring the inter-relationships between factors affecting the influence of different information types on management decisions. Results indicate that managers have a high inclination toward adaptive behavior, given they operate in an information poor environment. The most influential types of information were those that enabled interaction between information provider and recipient (e.g., staff experience and expertise). An analysis of the concordance in individuals' responses for different information types showed that neither accessibility nor organizational expectation of use was aligned with influence on decision-making. Alignment of responses also varied by work area. Raising expectations of information use or increasing access to particular types of information is therefore unlikely to result in an increase in influence on management decision-making. Rather than focussing on matching accessibility and expected use of particular information types, our results indicate that technical information uptake is best supported through existing peer networks tailored to specific work areas.

Technical diagnostics - equipment monitoring for increasing safety and availability of nuclear power plants

International Nuclear Information System (INIS)

Sturm, A.; Foerster, R.

1977-01-01

Utilization of technical diagnostics in equipment monitoring of nuclear power plants for ensuring nuclear safety, economic availability, and for decision making on necessary maintenance is reviewed. Technical diagnostics is subdivided into inspection and early detection of malfunctions. Moreover, combination of technical diagnostics and equipment monitoring, integration of technical diagnostics into maintenance strategy, and problems of introducing early detection of malfunctions into maintenance management of nuclear power plants are also discussed. In addition, a compilation of measuring techniques used in technical diagnostics has been made. The international state of the art of equipment monitoring in PWR nuclear power plants is illustrated by description of the sound and vibration measuring techniques. (author)

MOLT: A Mobile Learning Tool That Makes Learning New Technical English Language Words Enjoyable

Directory of Open Access Journals (Sweden)

Dogan - Ibrahim

2008-10-01

Full Text Available There is an increase use of wireless technologies in education all over the world. In fact, wireless technologies such as laptop computers, palmtop computers, and mobile phones are revolutionizing education and transforming the traditional classroom based learning and teaching into anytime and anywhere education. This paper investigates the use of wireless technologies in education with particular reference to the potential of learning new technical English Language words using SMS text messaging. The system, developed by the authors, called Mobile Learning Tool (MOLT, has been tested with 45 first-year undergraduate students. Students’ opinions have been collected after the experiment. Our results show that students enjoyed and be happy used mobile phones to learn new technical English word. We believe that if we add the improvements or modifications students wish to see in the MOLT system, then using the MOLT system as an educational tool will contribute to motivation and success of students.

Designing Writing Assignments for Vocational-Technical Courses. A Guide for Teachers in the Two-Year College and Technical Institute.

Science.gov (United States)

Killingsworth, Jimmie, Ed.; And Others

The 27 articles in this 6-part guide provide information on developing and implementing writing instruction as part of content-area courses in two-year vocational-technical colleges. Part One, General Concerns, includes "Making Writing Work for You in the Interactive Classroom" (Killingsworth, Rude); "Evaluating and Responding to Student Writing"…

77 FR 13663 - Order Making Fiscal Year 2012 Mid-Year Adjustments to Transaction Fee Rates

Science.gov (United States)

2012-03-07

... on transactions in the six months before the effective date of the mid-year adjustment. The... series {[Delta] 1 , [Delta] 2 , * * *, [Delta] 120 {time} . These are given by [mu] = 0.007 and [sigma...] + [sigma]\\2\\/2), or on average ADS t = 1.015 x ADS t-1 . 6. For February 2012, this gives a forecast ADS of...

Sperm competition risk drives rapid ejaculate adjustments mediated by seminal fluid.

Science.gov (United States)

Bartlett, Michael J; Steeves, Tammy E; Gemmell, Neil J; Rosengrave, Patrice C

2017-10-31

In many species, males can make rapid adjustments to ejaculate performance in response to sperm competition risk; however, the mechanisms behind these changes are not understood. Here, we manipulate male social status in an externally fertilising fish, chinook salmon ( Oncorhynchus tshawytscha ), and find that in less than 48 hr, males can upregulate sperm velocity when faced with an increased risk of sperm competition. Using a series of in vitro sperm manipulation and competition experiments, we show that rapid changes in sperm velocity are mediated by seminal fluid and the effect of seminal fluid on sperm velocity directly impacts paternity share and therefore reproductive success. These combined findings, completely consistent with sperm competition theory, provide unequivocal evidence that sperm competition risk drives plastic adjustment of ejaculate quality, that seminal fluid harbours the mechanism for the rapid adjustment of sperm velocity and that fitness benefits accrue to males from such adjustment.

Technical property and application of industrial computed tomography

International Nuclear Information System (INIS)

Sun Lingxia; Ye Yunchang

2006-01-01

The main technical property of industrial computed tomography (ICT) and its application in non-destructive testing (NDT) were described. And some examples of ICT applications in such fields as defects detection, welding quality, density uniformity, structure analysis and making-up quality were given. (authors)

Rural water tanks with HFB technique: technical guide

CSIR Research Space (South Africa)

Solsona, F

1991-03-01

Full Text Available This technical guide describes a very simple technique for water tank construction called H-F-B (heart filled blocks). The technique makes use of a simple mould (which can be made even in rural areas) for the manufacture of concrete building blocks...

The Interplay of Work-Family Life and Psychosocial Adjustment for International Graduate Students

OpenAIRE

Bulgan, Gökçe; Çiftçi, Ayşe

2017-01-01

The purpose of this paper is to critically review the literature on the interplay of work-family life and psychosocial adjustment of married international graduate students to the United States, provide evidence for a complicated and integrated support mechanism for married international graduate students, and make specific recommendations. Empirical studies on student and expatriate work-family life and psychosocial adjustment are reviewed. Studies indicated a significant negative relationsh...

Vincent Vuillemin: Consolidating CERN’s technical base

CERN Multimedia

2009-01-01

Former head of the Technical Support Department, Vincent Vuillemin is pursuing his mission as the head of the new Engineering Department. The remodelled department is working towards the resumption of LHC operations, on the Laboratory’s numerous projects and consolidation of the existing facilities. Vincent Vuillemin studies the table spread out on his broad office desk, showing his department’s projects. Red shows top-priority projects, blue is for projects under development and yellow is for future projects. Of course, the top red slot is reserved for the LHC. "Getting the LHC back into service is our absolute top priority," states Vuillemin. Whenever a technical difficulty arose with the LHC project—from defects in the cryogenic distribution line to the manufacturing problems that affected the collimators—the teams of the Technical Support Department (TS), now the Engineering Department (EN), were at the forefront, making u...

Explicating the Sustainable Design of Technical Artefacts

DEFF Research Database (Denmark)

Vissonova, Karina

2016-01-01

afforded by the properties of artefacts. The study is a conceptual analysis and as such belongs to the field of epistemology of design. It offers three contributions to the design discipline: (1) a proposition of the definition of the sustainable design kind; (2) a proposition of the concept of technical......Sustainable design of technical artefacts is referred to as if it were a kind of design with some specific characteristics. However, in design research and practice alike, there appears to be a lack of shared conceptions of what such a design might entail. Furthermore, we have no clear grounds...... for evaluating what makes the sustainable design solutions permissible. The lack of shared conceptions is largely due to ambiguities associated with the notion of sustainability. In response to these challenges, the aim of my study is to offer a definition of sustainable design of technical artefacts. I argue...

Technical specifications and performance of CANDU fuel

International Nuclear Information System (INIS)

Sejnoha, R.

1997-01-01

The relations between Technical Specifications and fuel performance are discussed in terms of design limits and margins. The excellent performance record of CANDU reactor fuel demonstrates that the fuel design defined in the Technical Specifications (and with it other components of the procurement cycle, such as fuel manufacturing), satisfy the requirements. New requirements, changing conditions of fuel application and accumulating experience make periodic updates of the Technical Specifications necessary. Under the CANDU Owners Group (COG) Working Party 9, a Work Package has been conducted to support the review of the Specifications and the documentation of the rationales for their requirements. So far, the review has been completed for 4 Specifications: 1 for Zircaloy tubing, and 3 for uranium dioxide powder. It is planned to complete the review of all 11 currently used specifications by 1999. The paper summarizes the results achieved to mid 1997. (author)

Multi-criteria decision making : AHP method applied for network bridge prioritization

NARCIS (Netherlands)

Allah Bukhsh, Zaharah; Stipanovic, Irina; Klanker, Giel; Hoj, Niels; Imam, Boulent; Xenidis, Yiannis; Mandić Ivanković, Ana

2017-01-01

In bridge management systems, multi-objective decision-making has emerged as a decision support technique to integrate various technical information and stakeholder values. Different multicriteria decision making techniques and tools have been developed in the last three decades. This paper presents

The Agency's Technical Co-operation activities in 1987. Report by the Director General

International Nuclear Information System (INIS)

1988-08-01

This report is part of a wide range of documentation which the Agency provides to Member States on its technical co-operation activities at various times during the year. It is, in particular, complemented by the achievement reporting submitted to the Technical Assistance and Co-operation Committee of the Board in the annual implementation reports that give the status of the technical co-operation programmes as at 30 September in each year. Following the 1986 Technical Co-operation Seminar and based on continuing consultations with Member States various steps to improve the quality of the programme were taken in 1987: for example, new project request forms and management plans were introduced and preparatory assistance was expanded. Office automation was intensified and the computerized data base covering technical co-operation was enhanced further. Work continues on the adaptation of data provided by the new Financial Information and Control System (FIGS) to the needs of the technical co-operation programmes and vice-versa. While several problems have still to be overcome, it has on the whole, been possible in this report to re-establish data comparability with previous years. Evaluation has become an integral part of the Agency's technical cooperation activities. In addition to on-going mid-project and end-of-project evaluations, expert services and fellowships were evaluated in 1987 and the first country programme evaluation was also undertaken. During 1987, a total of 962 projects were operational and 64 training courses were held. These activities involved 1808 expert assignments while 1975 persons received training abroad. Of the provisions in the 1987 total adjusted programme, one half was earmarked for equipment, while the other half was equally divided between ear markings for experts and for training. Of the Agency's technical co-operation resources in 1987, 72.5% came from the Technical Assistance and Co-operation Fund, 13.7% from extra budgetary

Proposal for outline of training and evaluation method for non-technical skills

International Nuclear Information System (INIS)

Nagasaka, Akihiko; Shibue, Hisao

2015-01-01

The purpose of this study is to systematize measures for improvement of emergency response capability focused on non-technical skills. As the results of investigation of some emergency training in nuclear power plant and referring to CRM training, following two issues were picked up. 1) Lack of practical training method for improvement of non-technical skills. 2) Lack of evaluation method of non-technical skills. Then, based on these 7 non-technical skills 'situational awareness' 'decision making' 'communication' 'teamworking' 'leadership' 'managing stress' 'coping with fatigue' are promotion factors to improve emergency response capability, we propose practical training method for each non-technical skill. Also we give example of behavioral markers as evaluation factor, and indicate approaches to introduce the evaluation method of non-technical skills. (author)

76 FR 66311 - Draft Documents To Support Submission of an Electronic Common Technical Document; Availability

Science.gov (United States)

2011-10-26

...] Draft Documents To Support Submission of an Electronic Common Technical Document; Availability AGENCY... making regulatory submissions in electronic format using the electronic Common Technical Document (eCTD....S. regional document type definition, version 3.0) and ``Comprehensive Table of Contents Headings...

Technical Diagnostics of Ventilation Units for Energy Efficiency and Safety of Operation

Directory of Open Access Journals (Sweden)

Kuzin Evgeny

2017-01-01

Full Text Available The article considers the questions of application of technical diagnostics fan installations methods for providing safe operation, the system of the technical maintenance improvement and repair. Due to the feet that one of the most important aspects in fan operation in mining is energy efficiency and energy saving, the lack of the data in the control of the level in vibration of stationary sensors is shown. The necessity of taking into account the geometric parameters of the intake channel has been shown, and also the necessity of creation of the reference masks for the assessment of technical condition and energy efficiency when operating fan installations in mining. The results of technical diagnostics of the main fans using the methods of vibration diagnostics are provided. Aspects of vibration at characteristic points are shown. The necessity for further accumulation of data characterizing vibration for adjustment of the reference masks and more accurate detection of defects and deviations from the energy-efficient mode of operation of the fan installations is given.

Technical Diagnostics of Ventilation Units for Energy Efficiency and Safety of Operation

Science.gov (United States)

Kuzin, Evgeny; Shahmanov, Vitality; Dubinkin, Dmitriy

2017-11-01

The article considers the questions of application of technical diagnostics fan installations methods for providing safe operation, the system of the technical maintenance improvement and repair. Due to the feet that one of the most important aspects in fan operation in mining is energy efficiency and energy saving, the lack of the data in the control of the level in vibration of stationary sensors is shown. The necessity of taking into account the geometric parameters of the intake channel has been shown, and also the necessity of creation of the reference masks for the assessment of technical condition and energy efficiency when operating fan installations in mining. The results of technical diagnostics of the main fans using the methods of vibration diagnostics are provided. Aspects of vibration at characteristic points are shown. The necessity for further accumulation of data characterizing vibration for adjustment of the reference masks and more accurate detection of defects and deviations from the energy-efficient mode of operation of the fan installations is given.

State Technical Committee for Accounting. Official Report.

Science.gov (United States)

Jensen, Claudia

This report contains validated task inventory listings for accounting occupations. An introductory report in brief outline form gives background of the work of the technical committee that identified the duties and tasks. This is followed by four attachments which make up most of the document. Attachment A has two parts: (1) an accounting skills…

The Making of Self-Monitoring Asthma Patients

DEFF Research Database (Denmark)

Langstrup, Henriette; Winthereik, Brit Ross

2008-01-01

Those calling for more evidence to support ever-increasing efforts to use information and communication technologies (ICT) in medical work argue that rigorous facts are necessary to make viable in practice substantiated use of these technologies. By contrast, socio-technical studies researchers, ...

How can we make user instructions motivational?

NARCIS (Netherlands)

Steehouder, M.F.; Loorbach, N.R.

2004-01-01

Good technical instructions are often viewed as 'cool, concise and professional', but there are good arguments to pay attention to their persuasive and motivational aspects as well. Until now, only analyses of existing instructions have been published, while guidelines for making instructions

Input current interharmonics in adjustable speed drives caused by fixed-frequency modulation techniques

DEFF Research Database (Denmark)

Soltani, Hamid; Davari, Pooya; Loh, Poh Chiang

2016-01-01

Adjustable Speed Drives (ASDs) based on double-stage conversion systems may inject interharmonics distortion into the grid, other than the well-known characteristic harmonic components. The problems created by interharmonics make it necessary to find their precise sources, and, to adopt an approp......Adjustable Speed Drives (ASDs) based on double-stage conversion systems may inject interharmonics distortion into the grid, other than the well-known characteristic harmonic components. The problems created by interharmonics make it necessary to find their precise sources, and, to adopt...... an appropriate strategy for minimizing their effects. This paper investigates the ASD's input current interharmonic sources caused by applying symmetrical regularly sampled fixed-frequency modulation techniques on the inverter. The interharmonics generation process is precisely formulated and comparative results...

Efficiency potential of management and technical solutions for a construction object

Directory of Open Access Journals (Sweden)

Lapidus Azariy Abramovich

2014-01-01

Full Text Available The authors investigate the models of efficiency potential of management and technical solutions for a construction object, which allows accounting for the influence of management-technological and administrative solutions in the process of implementing construction project. The solutions are represented by various factors – solitary integral potentials. The factors, which should be taken into account in the process of developing an integral model, are: development of general contracting structure, project decisions, management decisions, administrative decisions and ecological impact. In is necessary to develop the model, which will integrally put together the above mentioned factors of a construction project, observe and investigate other factors, create a model and get the opportunity not only to predict the endpoint of the future construction object on the stage of formulating technological requirements, but also to monitor the changes of this prognosis in time. The parameters of the integral potential will allow the system to obtain flexibility, which makes it possible to adjust to the changes usually taking place on a construction object and at the same time to aim for optimization of organizational, technological and administrative solutions in the process of reaching endpoint of construction.

Book Review: New Perspectives on Technical Editing

Science.gov (United States)

Murphy, A. J. (Ed.); Sterken, Christiaan

2012-08-01

skills, or do not have a very broad knowledge base. The language fluency of every contributor makes this book a pleasure to read, and this particular volume of Baywood's Technical Communications Series is very well edited. The subject index covers almost 8 two-column pages.

Digital technical map of Košice city

Directory of Open Access Journals (Sweden)

Štefan Kuzevič

2007-06-01

Full Text Available The digital map of a city is comprised complex of the map. Process of creation of the digital map of a city is time consuming and financially demanding. The digital map is created as co-operation of the local authority, technology network administrator, companies, and local government. The exact and current digital map of the city utilizable for multilateral applications is the result of this co-operation. The digital map of city catch all important phenomenon and objects which are needed for making decisions and planning to all grades controlling the local authority. The Geographic information systems tools make possible updating digital map, analyses and syntheses spatial phenomena and theirs relationships. The digital map of city is created step by step. The digital technical map of city is one of very important part of the digital map. Illustration of the part digital technical map of Košice is showed in the Fig. 1.

Maternal Zinc Intakes and Homeostatic Adjustments during Pregnancy and Lactation

Science.gov (United States)

Donangelo, Carmen Marino; King, Janet C.

2012-01-01

Zinc plays critical roles during embryogenesis, fetal growth, and milk secretion, which increase the zinc need for pregnancy and lactation. Increased needs can be met by increasing the dietary zinc intake, along with making homeostatic adjustments in zinc utilization. Potential homeostatic adjustments include changes in circulating zinc, increased zinc absorption, decreased zinc losses, and changes in whole body zinc kinetics. Although severe zinc deficiency during pregnancy has devastating effects, systematic reviews and meta-analysis of the effect of maternal zinc supplementation on pregnancy outcomes have consistently shown a limited benefit. We hypothesize, therefore, that zinc homeostatic adjustments during pregnancy and lactation improve zinc utilization sufficiently to provide the increased zinc needs in these stages and, therefore, mitigate immediate detrimental effects due to a low zinc intake. The specific questions addressed are the following: How is zinc utilization altered during pregnancy and lactation? Are those homeostatic adjustments influenced by maternal zinc status, dietary zinc, or zinc supplementation? These questions are addressed by critically reviewing results from published human studies on zinc homeostasis during pregnancy and lactation carried out in different populations worldwide. PMID:22852063

Recent Progress in Adjustable X-ray Optics for Astronomy

Science.gov (United States)

Reid, Paul B.; Allured, Ryan; Cotroneo, Vincenzo; McMuldroch, Stuart; Marquez, Vanessa; Schwartz, Daniel A.; Vikhlinin, Alexey; ODell, Stephen L.; Ramsey, Brian; Trolier-McKinstry, Susan;

Water losses during technical snow production

Science.gov (United States)

Grünewald, Thomas; Wolfsperger, Fabian

2017-04-01

These days, the production of technical snow can be seen as a prerequisite for winter tourism. Huge amounts of water are used for technical snow production by ski resorts, especially in the beginning of the winter season. The aim is to guarantee an appropriate amount of snow to reliably provide optimal ski runs until the date of season opening in early December. Technical snow is generated by pumping pressurized water through the nozzles of a snow machine and dispersing the resulting spray of small water droplets which freeze during their travel to the ground. Cooling and freezing of the droplets can only happen if energy is emitted to the air mass surrounding the droplets. This heat transfer is happening through convective cooling and though evaporation and sublimation of water droplets and ice particles. This means that also mass is lost from the droplets and added in form of vapor to the air. It is important to note that not all water that is pumped through the snow machine is converted to snow distributed on the ground. Significant amounts of water are lost due to wind drift, sublimation and evaporation while droplets are traveling through the air or to draining of water which is not fully frozen when arriving at the ground. Studies addressing this question are sparse and the quantity of the water losses is still unclear. In order to assess this question in more detail, we obtained several systematic field observations at a test site near Davos, Switzerland. About a dozen of snow making tests had been performed during the last winter seasons. We compare the amount of water measured at the intake of the snow machine with the amount of snow accumulating at the ground during a night of snow production. The snow mass was calculated from highly detailed repeated terrestrial laser scanning measurements in combination with manually gathered snow densities. In addition a meteorological station had been set up in the vicinity observing all relevant meteorological

Alternative Approaches to Technical Efficiency Estimation in the Stochastic Frontier Model

OpenAIRE

Acquah, H. de-Graft; Onumah, E. E.

2014-01-01

Estimating the stochastic frontier model and calculating technical efficiency of decision making units are of great importance in applied production economic works. This paper estimates technical efficiency from the stochastic frontier model using Jondrow, and Battese and Coelli approaches. In order to compare alternative methods, simulated data with sample sizes of 60 and 200 are generated from stochastic frontier model commonly applied to agricultural firms. Simulated data is employed to co...

IC layout adjustment method and tool for improving dielectric reliability at interconnects

Energy Technology Data Exchange (ETDEWEB)

Kahng, Andrew B.; Chan, Tuck Boon

2018-03-20

Method for adjusting a layout used in making an integrated circuit includes one or more interconnects in the layout that are susceptible to dielectric breakdown are selected. One or more selected interconnects are adjusted to increase via to wire spacing with respect to at least one via and one wire of the one or more selected interconnects. Preferably, the selecting analyzes signal patterns of interconnects, and estimates the stress ratio based on state probability of routed signal nets in the layout. An annotated layout is provided that describes distances by which one or more via or wire segment edges are to be shifted. Adjustments can include thinning and shifting of wire segments, and rotation of vias.

International linear collider. A technical progress report

Energy Technology Data Exchange (ETDEWEB)

Arnold, Ned [Argonne National Laboratory, IL (United States); Aderhold, Sebastian [DESY, Hamburg (Germany); Adolphsen, Chris [Stanford Linear Accelerator Center, Menlo Park, CA (United States); and others

2012-07-01

The International Linear Collider: A Technical Progress Report marks the halfway point towards the Global Design Effort fulfilling its mandate to follow up the ILC Reference Design Report with a more optimised Technical Design Report (TDR) by the end of 2012. The TDR will be based on much of the work reported here and will contain all the elements needed to propose the ILC to collaborating governments, including a technical design and implementation plan that are realistic and have been better optimised for performance, cost and risk. We are on track to develop detailed plans for the ILC, such that once results from the Large Hadron Collider (LHC) at CERN establish the main science goals and parameters of the next machine, we will be in good position to make a strong proposal for this new major global project in particle physics. The two overriding issues for the ILC R and D programme are to demonstrate that the technical requirements for the accelerator are achievable with practical technologies, and that the ambitious physics goals can be addressed by realistic ILC detectors. This GDE interim report documents the impressive progress on the accelerator technologies that can make the ILC a reality. It highlights results of the technological demonstrations that are giving the community increased confidence that we will be ready to proceed with an ILC project following the TDR. The companion detector and physics report document likewise demonstrates how detector designs can meet the ambitious and detailed physics goals set out by the ILC Steering Committee. LHC results will likely affect the requirements for the machine design and the detectors, and we are monitoring that very closely, intending to adapt our design as those results become available.

International Linear Collider-A Technical Progress Report

Energy Technology Data Exchange (ETDEWEB)

Elsen, Eckhard; /DESY; Harrison, Mike; /Brookhaven; Hesla, Leah; /Fermilab; Ross, Marc; /Fermilab; Royole-Degieux, Perrine; /Paris, IN2P3; Takahashi, Rika; /KEK, Tsukuba; Walker, Nicholas; /DESY; Warmbein, Barbara; /DESY; Yamamoto, Akira; /KEK, Tsukuba; Yokoya, Kaoru; /KEK, Tsukuba; Zhang, Min; /Beijing, Inst. High Energy Phys.

2011-11-04

The International Linear Collider: A Technical Progress Report marks the halfway point towards the Global Design Effort fulfilling its mandate to follow up the ILC Reference Design Report with a more optimised Technical Design Report (TDR) by the end of 2012. The TDR will be based on much of the work reported here and will contain all the elements needed to propose the ILC to collaborating governments, including a technical design and implementation plan that are realistic and have been better optimised for performance, cost and risk. We are on track to develop detailed plans for the ILC, such that once results from the Large Hadron Collider (LHC) at CERN establish the main science goals and parameters of the next machine, we will be in good position to make a strong proposal for this new major global project in particle physics. The two overriding issues for the ILC R&D programme are to demonstrate that the technical requirements for the accelerator are achievable with practical technologies, and that the ambitious physics goals can be addressed by realistic ILC detectors. This GDE interim report documents the impressive progress on the accelerator technologies that can make the ILC a reality. It highlights results of the technological demonstrations that are giving the community increased confidence that we will be ready to proceed with an ILC project following the TDR. The companion detector and physics report document likewise demonstrates how detector designs can meet the ambitious and detailed physics goals set out by the ILC Steering Committee. LHC results will likely affect the requirements for the machine design and the detectors, and we are monitoring that very closely, intending to adapt our design as those results become available.

Adjustment of rainfall estimates from weather radars using in-situ stormwater drainage sensors

DEFF Research Database (Denmark)

Ahm, Malte

importance as long as the estimated flow and water levels are correct. It makes sense to investigate the possibility of adjusting weather radar data to rainfall-runoff measurements instead of rain gauge measurements in order to obtain better predictions of flow and water levels. This Ph.D. study investigates......-rain gauge adjusted data is applied for urban drainage models, discrepancies between radar-estimated runoff and observed runoff still occur. The aim of urban drainage applications is to estimate flow and water levels in critical points in the system. The “true” rainfall at ground level is, therefore, of less...... how rainfall-runoff measurements can be utilised to adjust weather radars. Two traditional adjustments methods based on rain gauges were used as the basis for developing two radar-runoff adjustment methods. The first method is based on the ZR relationship describing the relation between radar...

Oil production, oil prices, and macroeconomic adjustment under different wage assumptions

International Nuclear Information System (INIS)

Harvie, C.; Maleka, P.T.

1992-01-01

In a previous paper one of the authors developed a simple model to try to identify the possible macroeconomic adjustment processes arising in an economy experiencing a temporary period of oil production, under alternative wage adjustment assumptions, namely nominal and real wage rigidity. Certain assumptions were made regarding the characteristics of actual production, the permanent revenues generated from that oil production, and the net exports/imports of oil. The role of the price of oil, and possible changes in that price was essentially ignored. Here we attempt to incorporate the price of oil, as well as changes in that price, in conjunction with the production of oil, the objective being to identify the contribution which the price of oil, and changes in it, make to the adjustment process itself. The emphasis in this paper is not given to a mathematical derivation and analysis of the model's dynamics of adjustment or its comparative statics, but rather to the derivation of simulation results from the model, for a specific assumed case, using a numerical algorithm program, conducive to the type of theoretical framework utilized here. The results presented suggest that although the adjustment profiles of the macroeconomic variables of interest, for either wage adjustment assumption, remain fundamentally the same, the magnitude of these adjustments is increased. Hence to derive a more accurate picture of the dimensions of adjustment of these macroeconomic variables, it is essential to include the price of oil as well as changes in that price. (Author)

Neuroscientific evidence for contextual effects in decision making.

Science.gov (United States)

Hytönen, Kaisa

2014-02-01

Both internal and external states can cause inconsistencies in decision behavior. I present examples from behavioral decision-making literature and review neuroscientific knowledge on two contextual influences: framing effects and social conformity. The brain mechanisms underlying these behavioral adjustments comply with the dual-process account and simple learning mechanisms, and are weak indicators for unintentionality in decision-making processes.

Data analysis-based autonomic bandwidth adjustment in software defined multi-vendor optical transport networks.

Science.gov (United States)

Li, Yajie; Zhao, Yongli; Zhang, Jie; Yu, Xiaosong; Jing, Ruiquan

2017-11-27

Network operators generally provide dedicated lightpaths for customers to meet the demand for high-quality transmission. Considering the variation of traffic load, customers usually rent peak bandwidth that exceeds the practical average traffic requirement. In this case, bandwidth provisioning is unmetered and customers have to pay according to peak bandwidth. Supposing that network operators could keep track of traffic load and allocate bandwidth dynamically, bandwidth can be provided as a metered service and customers would pay for the bandwidth that they actually use. To achieve cost-effective bandwidth provisioning, this paper proposes an autonomic bandwidth adjustment scheme based on data analysis of traffic load. The scheme is implemented in a software defined networking (SDN) controller and is demonstrated in the field trial of multi-vendor optical transport networks. The field trial shows that the proposed scheme can track traffic load and realize autonomic bandwidth adjustment. In addition, a simulation experiment is conducted to evaluate the performance of the proposed scheme. We also investigate the impact of different parameters on autonomic bandwidth adjustment. Simulation results show that the step size and adjustment period have significant influences on bandwidth savings and packet loss. A small value of step size and adjustment period can bring more benefits by tracking traffic variation with high accuracy. For network operators, the scheme can serve as technical support of realizing bandwidth as metered service in the future.

Prototype for an automated technical specification information system

International Nuclear Information System (INIS)

Quinn, E.L.; Mills, R.H.; Groves, J.E.

1985-01-01

The Southern California Edison (SCE) Automated Technical Specification Information System (ATSIS) at the San Onofre nuclear generating station (SONGS) has been developed as a prototype for an on-line information management system. This system provides an appropriate level of update, inquiry, and report generation capabilities to help support plant operators at SONGS in their efforts to anticipate, identify, document, and track certain actions and activities associated with plant technical specifications and associated limiting conditions of operation (LCOs). Substantially increased emphasis is being placed on adherence to nuclear regulatory requirements and commitments contained on the operating licenses of nuclear power plants. Additionally, as each year passes, such requirements are becoming increasingly detailed and complex, making it more and more difficult to track and ensure total compliance with the many and varied requirements. To assist the operations department at SONGs in meeting their regulatory commitments, in January 1985 SCE commenced gathering together the leading technical expertise available in the industry to develop a computerized system to track all technical specification-related equipment for operability and impact on LCOs

Seasonal Adjustment with the R Packages x12 and x12GUI

Directory of Open Access Journals (Sweden)

Alexander Kowarik

2014-12-01

The provision of the powerful X-12-ARIMA seasonal adjustment program available directly from within R, as well as of the new facilities for marking outliers, batch processing and change tracking, makes the package a potent and functional tool.

XML: Solution for the integration of nuclear power plant data and technical documents

International Nuclear Information System (INIS)

Gordillo, F.

2000-01-01

Assuring proper operation of the systems that make up a nuclear power plant requires handling a massive amount of technical documents. This technical documentation, consisting mainly of system descriptions, operating and maintenance procedures, safety procedures, etc, presents particular characteristics, mainly: Great volume of information. High contents in figures and graphics. High reliability required. Multiple cross-references among documents. (Author)

Making Sense of Data from Complex Assessments. CSE Technical Report.

Science.gov (United States)

Mislevy, Robert J.; Steinberg, Linda S.; Almond, Russell G.; Breyer, F. Jay; Johnson, Lynn

Advances in cognitive psychology deepen the understanding of how students gain and use knowledge and broaden the range of performances and situations researchers want to see to acquire evidence about students' developing knowledge. Advances in technology make it possible to capture more complex performances in assessment settings by including, as…

NET SALARY ADJUSTMENT

CERN Multimedia

Finance Division

2001-01-01

On 15 June 2001 the Council approved the correction of the discrepancy identified in the net salary adjustment implemented on 1st January 2001 by retroactively increasing the scale of basic salaries to achieve the 2.8% average net salary adjustment approved in December 2000. We should like to inform you that the corresponding adjustment will be made to your July salary. Full details of the retroactive adjustments will consequently be shown on your pay slip.

The technical potential for proliferation in Northeast Asian states

International Nuclear Information System (INIS)

Joeck, N.; Kramer, R.

1995-01-01

This is a review of the technical capabilities of the states in Northeast Asia - principally Japan, South Korea, and North Korea - to develop nuclear weapons. At the outset, however, it should be emphasised that nuclear proliferation is primarily a political and security problem, rather than a technical challenge. The technical challenge is substantial, but if one looks at states with the technical capacity to develop nuclear weapons, it might be surprising to find that most of them have chosen not to do so. Even with access to fissile material and the technical and scientific infrastructure necessary to produce nuclear weapons, such states as Canada, Switzerland, Norway, Germany, Argentina, Brazil, Japan and many others, have not done so. All three non-nuclear weapon states in Northeast Asia have the technical capability to develop nuclear weapons. Japan and South Korea have intrusive safeguards and inspection arrangements on their nuclear programs, which allow their neighbours and the rest of the world to verify that they have not changed that status, and that they are living up to their NPT commitments. Despite its original commitment to the NPT, North Korea has yet to establish similar arrangements. It is ironic that the country with the smallest and technically least sophisticated nuclear program is the one creating the greatest concern about nuclear proliferation in the region. This irony illustrates the point made in the introduction, however. Nuclear proliferation is more a function of political decision-making than of technical capability

Demonization of Divorce: Prevalence Rates and Links to Postdivorce Adjustment

Science.gov (United States)

Krumrei, Elizabeth J.; Mahoney, Annette; Pargament, Kenneth I.

2011-01-01

The meaning-making process can be crucial to individuals as they adjust to their divorce. Demonization is a negative coping response (also known as spiritual struggle) that involves appraising someone or something as related to demonic forces. Individuals may cognitively frame a divorce as the work of Satan in order to understand suffering while…

European Market Making and Policy Duplication

DEFF Research Database (Denmark)

Frankel, Christian

2013-01-01

This paper argues that private regulation has been essential to the making of the common European market. The distinction between negative and positive integration, usually used to understand the making of the common European market, only gives us part of the picture, as it focuses on public...... authorities and the regulation issued by them, and tends to ignore private authorities. A focus on private regulation is suggested to enlarge the focus on positive and negative integration, and this is used in an analysis of EU's removal of barriers to trade from 1958 to 2000. The paper shows that private...... regulation in the form of technical standardisation has become essential to European market making....

Enhancing Cross-Cultural Training Efficacy on Expatriate Adjustment through Emotional Intelligence and Social Capital

OpenAIRE

Susanto, Ely; Rostiani, Rokhima

2012-01-01

Cross cultural training is widely believed to make a positive contribution to expatriate adjustment. In practice, however, it is very costly and sometimes ineffective for expatriates. Therefore, there is a growing importance placed on increasing the cost effectiveness or enhancing the efficacy of crosscultural training by functioning individual expatriate’s social capital and emotional intelligence as moderating variables towards expatriate’s adjustment and performance. To do so we blend idea...

Conceptualizing the Organizational Role of Technical Communicators: A Systems Approach.

Science.gov (United States)

Harrison, Teresa M.; Debs, Mary Beth

1988-01-01

Uses a systems approach to organizational theory to argue that technical communicators function as "boundary spanners," who make sense of and disseminate information required for coordination between organizational groups, and for effective responses to the environment. (JAD)

Making Our Food Safe

International Nuclear Information System (INIS)

Madsen, Michael

2013-01-01

Full text: As civilization has progressed societies have strived to make food safer; from using fire to cook our food, and boiling our water to make it safe to drink, advances in technology have helped kill microorganisms that can make food unsafe. The FAO/IAEA Joint Division helps provide technical assistance to Member States that want to implement irradiation technology in making their food safer. Food and waterborne diarrhoeal diseases are estimated to kill roughly 2.2 million people annually, of which 1.9 million are children. Irradiating some of the foods we eat can save many of these lives by reducing the risk of food poisoning and killing the organisms that cause disease. Irradiation works by treating food with a small dose of ionizing radiation, this radiation disrupts the bacteria’s DNA and cell membranes structure stopping the organism from reproducing or functioning, but does not make the food radioactive. It can be applied to a variety of foods from spices and seasonings, to fruits and vegetables and is similar to pasteurization, but without the need for high temperatures that might impair food quality. (author)

Internet use and decision making in community-based older adults

Directory of Open Access Journals (Sweden)

Bryan David James

2013-09-01

Full Text Available Use of the internet may provide tools and resources for better decision making, yet little is known about the association of internet use with decision-making in older persons. We examined this relationship in 66190 community-dwelling older persons without dementia from the Rush Memory and Aging Project, an ongoing longitudinal study of aging. Participants were asked to report if they had access to the internet and how frequently they used the internet and email. A 12-item instrument was used to assess financial and healthcare decision making using materials designed to approximate those used in real world settings. Items were summed to yield a total decision-making score. Associations were tested via linear regression models adjusted for age, sex, race, education, and a measure of global cognitive function. Secondary models further adjusted for income, depression, loneliness, social networks, social support, chronic medical conditions, instrumental activities of daily living, life space size, and health and financial literacy. Interaction terms were used to test for effect modification. Almost 70% of participants had access to the internet, and of those with access, 55% used the internet at least several times a week. Higher frequency of internet use was associated with better financial and healthcare decision making (β=0.11, p=0.002. The association persisted in a fully adjusted model (β=0.08, p=0.024. Interaction models indicated that higher frequency of internet use attenuated the relationships of older age, poorer cognitive function, and lower levels of health and financial literacy with poorer healthcare and financial decision making. These findings indicate that internet use is associated with better health and financial decision making in older persons. Future research is required to understand whether promoting the use of the internet can produce improvements in healthcare and financial decision making.

Technical analysis as a tool of market timing

International Nuclear Information System (INIS)

Rafferty, J.

2002-01-01

Risk management teams carry a high burden because businesses have to compete on a global scale. Timing is everything, once a decision to hedge in the futures has been made. How to determine when it is a good time to buy or sell, and be certain that this information has not already been factored into the price is tricky. There are two schools: fundamental analysis and technical analysis. Statistics and supply and demand data are examined to determine why in fundamental analysis, while technical analysis determines when by interpreting charts. With the help of charts that were displayed, the author examined the price of crude oil in 1990 and 1991 in an attempt to demonstrate technical analysis. Technical analysis is based on mathematics, but it is more art than science. It looks at market patterns that repeat themselves endlessly. Markets almost always enter into a period of consolidation or distribution when they break out. Additional charts displaying the price of crude oil for various periods from 1986 to 1991 were presented and analysed. The author concluded by stating that technical analysis provides visual guidelines to hedgers and traders to assist them in making intelligent forecasts about price and risk. figs

A STUDY ON SOCIAL ADJUSTMENT AMONG HIGHER SECONDARY SCHOOL STUDENTS AND ITS IMPACT ON THEIR ACADEMIC ACHIEVEMENT IN COIMBATORE DISTRICT

OpenAIRE

P.Priya Packiaselvi; Ms.Malathi.V.A

2017-01-01

Every human being seeks adjustment to various situations. He constantly makes efforts to adjustment himself to his surroundings because a wholesome adjustment is essential for leading a happy life and going satisfaction. Social adjustment to other people is general and to the group with which they are identified is particular. The main motive of the study is to find out the social adjustment among higher secondary school students and its impact on academic achievement in Coimbatore Educationa...

Children in Transition: Challenges and Opportunities in Adjusting to Secondary School

NARCIS (Netherlands)

Poorthuis, A.M.G.

2012-01-01

Each year, about 200,000 children in the Netherlands—and many more around the globe—make the transition from primary to secondary school. Many will do fine after this major life change, but others experience serious declines in adjustment in secondary school. The aim of the present dissertation is

Access to water: Technical and social solutions help communities ...

International Development Research Centre (IDRC) Digital Library (Canada)

Access to water: Technical and social solutions help communities make the most of available sources. 08 décembre 2010. Image. IDRC Communications. LASTING IMPACTS. IDRC-supported research engages communities, and countries, in developing durable solutions to water problems. Whatever the challenge, people ...

Product training for the technical expert the art of developing and delivering hands-on learning

CERN Document Server

Bixby, Daniel W

2018-01-01

I was pleased to review Dan's new book - pleased because he addresses an old topic in a new way. He is making no assumptions for trainers who are not fully experienced and seasoned. He takes them step-by-step through practical and realistic methods to set up training graduates to actually be on-the-job performers. Enjoy, learn and be inspired. Jim Kirkpatrick, PhD Senior Consultant, Kirkpatrick Partners, USA Daniel Bixby's approach to Product Training for technical experts is practical, relevant and exactly what anyone who is required to train others on technical content really needs. He writes with candor and with a sense of ease, making the reader feel as though he is right there with you helping to develop your training competency. A must read for anyone on your team required to provide technical training to others! Jennifer Alfaro Chief Human Resources Officer, USA An expert guide to developing and delivering technical product training programs While there are many books on talent developmen...

The effectiveness of ski bindings and their professional adjustment for preventing alpine skiing injuries.

Science.gov (United States)

Finch, C F; Kelsall, H L

1998-06-01

This article presents a critical review of the extent to which alpine ski bindings and their adjustment have been formally demonstrated to prevent injuries. It considers a range of evidence, from anecdotal evidence and informed opinion to biomechanical studies, testing of equipment, epidemiological studies and controlled field evaluations. A total of 15 published studies examining the effectiveness of bindings and their adjustment were identified. All of these included anecdotal or informed opinion, and all but one focused on equipment design. Seven studies involved the testing of bindings or binding prototypes, 2 studies presented biomechanical models of the forces involved in binding operation, 6 reported an epidemiological evaluation of ski bindings and 2 considered skiers' behaviours towards binding adjustment. Some of the reviewed articles relate to the study of the biomechanics of ski bindings and their release in response to various loads and loading patterns. Other studies examined the contribution of bindings and binding-release to lower extremity, equipment-related injuries, the effect of various methods of binding adjustment on injury risk and the determinants of skiers' behaviour relating to professional binding adjustment. Most of the evidence suggests that currently used bindings are insufficient for the multidirectional release required to reduce the risk of injury to the lower limb, especially at the knee. This evidence suggests that further technical developments and innovations are required. The standard of the manufacture of bindings and boots also needs to be considered. The optimal adjustment of bindings using a testing device has been shown to be associated with a reduced risk of lower extremity injury. Generally, however, the adjustment of bindings has been shown to be inadequate, especially for children's bindings. Recommendations for further research, development and implementation with respect to ski binding and their adjustment are given

TECHNICAL AND ORGANIZATIONAL IMPROVEMENTS OF PACKAGING PRODUCTION PROCESS

Directory of Open Access Journals (Sweden)

Anna Rudawska

2016-06-01

Full Text Available Due to customer driven economies, today’s world markets are characterized by high fluctuations in market demand and the frequent arrival of new technologies and new products. To stay competitive in such markets manufacturing companies require continuous improvements both in technical and organizational areas of their activity. The paper presents results of the diagnosis provided in the manufacturing area of the company producing cardboard packages and recommendations to make the production process more efficient. Especially, among the proposed technical and organizational recommendations the most important ones are: automation of certain elements of the production process and changes in production plant layout.

PVWatts Version 1 Technical Reference

Energy Technology Data Exchange (ETDEWEB)

Dobos, A. P.

2013-10-01

The NREL PVWatts(TM) calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes several hidden assumptions about performance parameters. This technical reference details the individual sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimation.

Professional Excellence Beyond Technical Competence

CERN Document Server

Rossiter, Alan P

2008-01-01

The training path for engineers focuses intensely on scientific and technical knowledge. Yet, our professional and personal satisfaction and success also depend on other traits that make us more effective and productive. In this thought-provoking book, Alan Rossiter provides practical guidance in developing the skills to become more effective in your work, while also balancing your life. It is invaluable reading for graduating college students and young professionals as well as seasoned practitioners who find that work is becoming all-consuming.

Distributed plot-making

DEFF Research Database (Denmark)

Jensen, Lotte Groth; Bossen, Claus

2016-01-01

different socio-technical systems (paper-based and electronic patient records). Drawing on the theory of distributed cognition and narrative theory, primarily inspired by the work done within health care by Cheryl Mattingly, we propose that the creation of overview may be conceptualised as ‘distributed plot......-making’. Distributed cognition focuses on the role of artefacts, humans and their interaction in information processing, while narrative theory focuses on how humans create narratives through the plot construction. Hence, the concept of distributed plot-making highlights the distribution of information processing...

Immediate or deferred adjustment of drug regimens in multidose drug dispensing systems.

Science.gov (United States)

Mertens, Bram J; Kwint, Henk-Frans; van Marum, Rob J; Bouvy, Marcel L

2018-05-18

Multidose drug dispensing (MDD) is used to help patients take their medicines appropriately. Little is known about drug regimen changes within these MDD systems and how they are effectuated by the community pharmacist. Manual immediate adjustments of the MDD system could introduce dispensing errors. MDD guidelines therefore recommend to effectuate drug regimen changes at the start of a new MDD system. The aim of this study was to investigate the frequency, type, procedure followed, immediate necessity, and time taken to make MDD adjustments. This was a cross-sectional study in eight community pharmacies in the Netherlands. All adjustments to MDD systems were systematically documented for 3 weeks by the community pharmacist. Overall, 261 MDD adjustments involving 364 drug changes were documented for 250 patients: 127 (35%) drug changes involved the addition of a new drug, 124 (34%) a change in dosage, and 95 (26%) drug discontinuation. Of the MDD adjustments, 135 (52%) were effectuated immediately: 81 (31%) by adjusting the MDD system manually, 49 (19%) by temporarily dispensing the drug separately from the MDD system, and 5 (2%) by ordering a new MDD system. Pharmacists considered that 36 (27%) of the immediate MDD adjustments could have been deferred until the next MDD system was produced. Immediate adjustment took significantly longer than deferred adjustment (p < 0.001). This study shows that in patients using MDD systems, over half of the drug regimen changes are adjusted immediately. The necessity of these immediate changes should be critically evaluated. Copyright © 2018. Published by Elsevier Inc.

Stockholm international conference 2003 on geological repositories: Political and technical progress

International Nuclear Information System (INIS)

2004-01-01

The conference reviewed global progress made as well as current perspectives on the activities to develop geologic repositories. The objectives were to review the progress in policy making as well as technical issues and to strengthen international co-operation on waste management and disposal issues. The first day of the conference addressed the policy aspects of geological repositories and the second day featured the more technical issues. Session 1: International progress in performing long-term safety studies and security of geological disposal were discussed and reviewed with examples from OECD/NEA, Belgium, Sweden, USA, Switzerland and Russia. Session 2: Views on stakeholder involvement and decision making process were presented by international organisations and national implementers from Japan, United Kingdom, Belgium and OECD/NEA. Session 3: Views on stakeholder involvement and decision making process were presented by regional and local stakeholders from France, Finland, Korea and Sweden. Session 4: International instruments assisting in the implementation of geological repositories were discussed, for example ICRP and IAEA/NEA safety documents, Joint Convention, Safeguard agreements, Nuclear Liability Conventions, etc. Session 5: The contribution of Research, Development and Demonstration was discussed with overviews of the progress achieved on scientific and technical issues over the past four years. Progress and key issues were presented from Switzerland, USA, Finland, Japan, Sweden and IAEA. Each of the papers and poster presentations have been analysed and indexed separately

Climatic architecture: Situation, principles, establishment of technical policies

International Nuclear Information System (INIS)

Brejon, P.

1994-01-01

Climatic architecture, despite the efforts of its protagonists, remains nearly marginal. Nevertheless, environmental awareness is gaining ground, whether through concern for the depletion of natural resources, for global warming or for CO 2 emissions. It is only by establishing technical policies, making an effort in terms of training and research and distributing knowledge to all those in the business that the principles of climatic architecture will actually be applied in the field. Resources are available to make climatic architecture a fundamental concern in the design of environmentally friendly buildings. (author). 6 refs, 3 tabs

INDOT Technical Training Plan : [Technical Summary

Science.gov (United States)

2012-01-01

A wide range of job classifications, increasing technical : performance expectations, licensing and certification requirements, : budget restrictions and frequent department : reorganization has made technical training of employees : more difficult, ...

Identification of mine rescue equipment reduction gears technical condition

Science.gov (United States)

Gerike, B. L.; Klishin, V. I.; Kuzin, E. G.

2017-09-01

The article presents the reasons for adopting intelligent service of mine belt conveyer drives concerning evaluation of their technical condition based on the diagnostic techniques instead of regular preventative maintenance. The article reveals the diagnostic results of belt conveyer drive reduction gears condition taking into account the parameters of lubricating oil, vibration and temperature. Usage of a complex approach to evaluate technical conditions allows reliability of the forecast to be improved, which makes it possible not only to prevent accidental breakdowns and eliminate unscheduled downtime, but also to bring sufficient economic benefits through reduction of the term and scope of work during overhauls.

Advance directives and outcomes of surrogate decision making before death.

Science.gov (United States)

Silveira, Maria J; Kim, Scott Y H; Langa, Kenneth M

2010-04-01

Recent discussions about health care reform have raised questions regarding the value of advance directives. We used data from survey proxies in the Health and Retirement Study involving adults 60 years of age or older who had died between 2000 and 2006 to determine the prevalence of the need for decision making and lost decision-making capacity and to test the association between preferences documented in advance directives and outcomes of surrogate decision making. Of 3746 subjects, 42.5% required decision making, of whom 70.3% lacked decision-making capacity and 67.6% of those subjects, in turn, had advance directives. Subjects who had living wills were more likely to want limited care (92.7%) or comfort care (96.2%) than all care possible (1.9%); 83.2% of subjects who requested limited care and 97.1% of subjects who requested comfort care received care consistent with their preferences. Among the 10 subjects who requested all care possible, only 5 received it; however, subjects who requested all care possible were far more likely to receive aggressive care as compared with those who did not request it (adjusted odds ratio, 22.62; 95% confidence interval [CI], 4.45 to 115.00). Subjects with living wills were less likely to receive all care possible (adjusted odds ratio, 0.33; 95% CI, 0.19 to 0.56) than were subjects without living wills. Subjects who had assigned a durable power of attorney for health care were less likely to die in a hospital (adjusted odds ratio, 0.72; 95% CI, 0.55 to 0.93) or receive all care possible (adjusted odds ratio, 0.54; 95% CI, 0.34 to 0.86) than were subjects who had not assigned a durable power of attorney for health care. Between 2000 and 2006, many elderly Americans needed decision making near the end of life at a time when most lacked the capacity to make decisions. Patients who had prepared advance directives received care that was strongly associated with their preferences. These findings support the continued use of advance

Artificial intelligence system for technical diagnostics of photomasks

OpenAIRE

Kozin A. A.; Kozina Yu. Yu.

2012-01-01

The developed artificial intelligence system has a high level of noise immunity, so its inclusion in the hardware and software for technical diagnostics of photomasks will reduce the hardware requirements for its execution, and thereby reduce the cost of the complex. As a result it will allow to make a small-scale production profitable.

Document collection of the 28th technical special committee on Fugen decommissioning

International Nuclear Information System (INIS)

Kutsuna, Hideki; Iwai, Hiroki; Mizui, Hiroyuki; Kadowaki, Haruhiko; Nakamura, Yasuyuki

2014-02-01

Fugen Decommissioning Engineering Center, in planning and carrying out our decommissioning technical development, has been establishing “Technical special committee on Fugen decommissioning” which consists of the members well-informed, aiming to make good use of Fugen as a place for technological development which is opened inside and outside the country, as the central point in the energy research and development base making project of Fukui prefecture, and to utilize the outcome in our decommissioning to the technical development effectively. This report compiles presentation materials “The Current Situation of Fugen Decommissioning”, “The Current Status of the Cutting Test toward the Practical Use of Laser Cutting Technology and the Future Plan”, “Study on Radioactive Substance Osmosis for Basis Concrete of Equipment”, “Verification Tests of the Room-Temperature Vacuum Drying and the Evaluation Method of Residual Amount of Heavy Water in the Tritium Removal” and “Report on the FUGEN Efforts of R and D for Decommissioning of the Fukushima Daiichi NPS - Applicability Test of Thermal and Mechanical Cutting Technology for the Dismantlement of the Internal Core of Fukushima Daiichi NPS -”, presented in the 28th Technical special committee on Fugen decommissioning which was held on September 24, 2013. (author)

Enhancing Cross-Cultural Training Efficacy on Expatriate Adjustment through Emotional Intelligence and Social Capital

Directory of Open Access Journals (Sweden)

Ely Susanto

2012-05-01

Full Text Available Cross cultural training is widely believed to make a positive contribution to expatriate adjustment. In practice, however, it is very costly and sometimes ineffective for expatriates. Therefore, there is a growing importance placed on increasing the cost effectiveness or enhancing the efficacy of crosscultural training by functioning individual expatriate’s social capital and emotional intelligence as moderating variables towards expatriate’s adjustment and performance. To do so we blend ideas drawn from social capital theory and emotional intelligence to develop the structure that underlies the logic of this paper. Thus, this paper uses social capital and emotional intelligence theories to enrich extant literature on expatriate adjustment

The hidden cost of investment. The impact of adjustment costs on firm performance measurement and regulation

International Nuclear Information System (INIS)

Nick, Sebastian; Wetzel, Heike

2014-01-01

In this study, we address a major problem in the measurement of firm performance and the regulation of natural monopolies, namely the intertemporal character of long-term investment decisions. In specific, we focus on the impact of adjustment costs of investments on estimates of firms' technical and cost inefficiency. We apply nonparametric dynamic data envelopment analysis to investigate the dynamic inefficiency of electricity distribution and transmission companies in the US during the years 2004 to 2011 and compare our results with their static counterparts. Our empirical findings reveal that ignoring long-term investments and their corresponding adjustment costs does significantly distort both firm-specific and industrial inefficiency estimates and may thus create misleading incentives for the regulated firms to cut investments.

A study on technical efficiency of a DMU (review of literature)

Science.gov (United States)

Venkateswarlu, B.; Mahaboob, B.; Subbarami Reddy, C.; Sankar, J. Ravi

2017-11-01

In this research paper the concept of technical efficiency (due to Farell) [1] of a decision making unit (DMU) has been introduced and the measure of technical and cost efficiencies are derived. Timmer’s [2] deterministic approach to estimate the Cobb-Douglas production frontier has been proposed. The idea of extension of Timmer’s [2] method to any production frontier which is linear in parameters has been presented here. The estimation of parameters of Cobb-Douglas production frontier by linear programming approach has been discussed in this paper. Mark et al. [3] proposed a non-parametric method to assess efficiency. Nuti et al. [4] investigated the relationships among technical efficiency scores, weighted per capita cost and overall performance Gahe Zing Samuel Yank et al. [5] used Data envelopment analysis to assess technical assessment in banking sectors.

Estimating the Contribution of Industry Structure Adjustment to the Carbon Intensity Target: A Case of Guangdong

Directory of Open Access Journals (Sweden)

Ping Wang

2016-04-01

Full Text Available Industry structure adjustment is an effective measure to achieve the carbon intensity target of Guangdong Province. Accurately evaluating the contribution of industry structure adjustment to the carbon intensity target is helpful for the government to implement more flexible and effective policies and measures for CO2 emissions reduction. In this paper, we attempt to evaluate the contribution of industry structure adjustment to the carbon intensity target. Firstly, we predict the gross domestic product (GDP with scenario forecasting, industry structure with the Markov chain model, CO2 emissions with a novel correlation mode based on least squares support vector machine, and then we assess the contribution of industry structure adjustment to the carbon intensity target of Guangdong during the period of 2011–2015 under nine scenarios. The obtained results show, in the ideal scenario, that the economy will grow at a high speed and the industry structure will be significantly adjusted, and thus the carbon intensity in 2015 will decrease by 25.53% compared to that in 2010, which will make a 130.94% contribution to the carbon intensity target. Meanwhile, in the conservative scenario, the economy will grow at a low speed and the industry structure will be slightly adjusted, and thus the carbon intensity in 2015 will decrease by 23.89% compared to that in 2010, which will make a 122.50% contribution to the carbon intensity target.

Necessity of creating digital tools to ensure efficiency of technical means

Science.gov (United States)

Rakov, V. I.; Zakharova, O. V.

2018-05-01

The authors estimated the problems of functioning of technical objects. The article notes that the increasing complexity of automation systems may lead to an increase of the redundant resource in proportion to the number of components and relationships in the system, and to the need of the redundant resource constant change that can make implementation of traditional structures with redundancy unnecessarily costly (Standby System, Fault Tolerance, High Availability). It proposes the idea of creating digital tools to ensure efficiency of technical facilities.

Maternal psychological distress and child decision-making.

Science.gov (United States)

Flouri, Eirini; Ioakeimidi, Sofia; Midouhas, Emily; Ploubidis, George B

2017-08-15

There is much research to suggest that maternal psychological distress is associated with many adverse outcomes in children. This study examined, for the first time, if it is related to children's affective decision-making. Using data from 12,080 families of the Millennium Cohort Study, we modelled the effect of trajectories of maternal psychological distress in early-to-middle childhood (3-11 years) on child affective decision-making, measured with a gambling task at age 11. Latent class analysis showed four longitudinal types of maternal psychological distress (chronically high, consistently low, moderate-accelerating and moderate-decelerating). Maternal distress typology predicted decision-making but only in girls. Specifically, compared to girls growing up in families with never-distressed mothers, those exposed to chronically high maternal psychological distress showed more risk-taking, bet more and exhibited poorer risk-adjustment, even after correction for confounding. Most of these effects on girls' decision-making were not robust to additional controls for concurrent internalising and externalising problems, but chronically high maternal psychological distress was associated positively with risk-taking even after this adjustment. Importantly, this association was similar for those who had reached puberty and those who had not. Given the study design, causality cannot be inferred. Therefore, we cannot propose that treating chronic maternal psychological distress will reduce decision-making pathology in young females. Our study suggests that young daughters of chronically distressed mothers tend to be particularly reckless decision-makers. Copyright © 2017. Published by Elsevier B.V.

Artificial intelligence system for technical diagnostics of photomasks

Directory of Open Access Journals (Sweden)

Kozin A. A.

2012-02-01

Full Text Available The developed artificial intelligence system has a high level of noise immunity, so its inclusion in the hardware and software for technical diagnostics of photomasks will reduce the hardware requirements for its execution, and thereby reduce the cost of the complex. As a result it will allow to make a small-scale production profitable.

Results from Consultancy Meeting on Qualified Technical Centres

International Nuclear Information System (INIS)

Novakovic, Mladen

2017-01-01

Qualified Technical Centres (QTC) - Current Situation: •Many Member States (MS) need help dealing with DSRS; •Most seek assistance, which can include funding, through the IAEA; •Technical assistance is provided by various governmental organization and private companies (service providers = SP). QTC - Method of Delivery Numerous MS requests are pressing the IAEA’s capacity to assist: •Use qualified internal and external experts/contractors; •Limited pool for DSRS and need to expand; •Dedicated and specialized equipment; •Mobile hot cell; •Mobile tool kit; •Field operations; •Coordinated approach with Nuclear Security and Safety. Qualified Technical Centres for the Management of DSRS: •The challenge is to scale up the support for safe and secure management of DSRS; •Strengthen existing capacity of some MS to support others and make support more sustainable; •Expands the support that can be readily provided and meet the many needs of MS

Marketing Needed to Make Universities Globally Competitive

Science.gov (United States)

Naik, B. M.

2016-01-01

The article aims at improving the quality of higher and technical education in India to world class standard. Institutions in knowledge economy are reckoned to be the drivers of development. Indian institutions are making efforts, investing money, appointing professors, students are studying hard but due to the lack of marketing strategy, their…

39 CFR 3010.25 - Limitation on unused rate adjustment authority rate adjustments.

Science.gov (United States)

2010-07-01

... only be applied together with inflation-based limitation rate adjustments or when inflation-based... used in lieu of an inflation-based limitation rate adjustment. ... 39 Postal Service 1 2010-07-01 2010-07-01 false Limitation on unused rate adjustment authority...

Briefing Products - Tools for Communicating Technical Issues to a Non-Technical Audience

International Nuclear Information System (INIS)

Clark, Harvey; Foster, Kevin T.

2011-01-01

Briefing Products are a new NARAC/IMAAC product line designed to communicate the consequences of a radiological, nuclear, chemical or biological agent incident to non-technical decision makers and key leaders. Each Briefing Product addresses a single decision or issue focused on potential actions that should be considered when responding to a hazard, while avoiding the use of technical or regulatory jargon. Briefing Products do not make protective action recommendations, although they do concretely assist decision-makers with development of their own protective actions by quoting or paraphrasing the published guidance relevant to the decision at hand. Briefing Products are produced in sets tailored to specific types of incident which together depict the key decisions and characteristics of the incident. Each Briefing Product in the set consists of three elements: (1) Primary Effects, (2) Key Points and (3) Presenter Notes. Both the Primary Effects and Key Points are ready for direct presentation, while the Presenter Notes are designed to provide background information to the presenter and are not for direct presentation to the audience. The Briefing Products themselves are alternative presentations of results from the customary standard NARAC/IMAAC technical products. Currently, Briefing Products are available for detonation of both RDDs (Radiological Dispersal Devices) and INDs (Improvised Nuclear Devices). A new set of products tailored to nuclear power plant (NPP) accidents is currently under development. This paper describes the scope, structure and content of the Briefing Product sets. Examples from the two sets of Briefing Products now available are presented.

Study on advanced systematic function of the JNC geological disposal technical information integration system. Research document

International Nuclear Information System (INIS)

Ishihara, Yoshinao; Fukui, Hiroshi; Sagawa, Hiroshi; Matsunaga, Kenichi; Ito Takaya

2004-02-01

In this study, while attaining systematization about the technical know-how mutually utilized between geology environmental field, disposal technology (design) field and safety assessment field, the share function of general information in which the formation of an information share and the use promotion between the technical information management databases built for every field were aimed at as an advancement of the function of JNC Geological Disposal Technical Information Integration System considered, and the system function for realizing considered in integration of technical information. (1) Since the concrete information about geology environment which is gradually updated with progress of stratum disposal research, or increases in reflected suitable for research of design and safety assessment. After arranging the form suitable for systematizing technical information, while arranging the technical information in both the fields of design and safety assessment with the form of two classes based on tasks/works, it systematized planning adjustment about delivery of technical information with geology environmental field. (2) In order to aim at integration of 3-fields technical information of geological disposal, based on the examination result of systematization of technical information, the function of mutual use of the information managed in two or more databases was considered. Moreover, while considering system functions, such as management of the use history of technical information, connection of information use, and a notice of common information, the system operation windows in consideration of the ease of operation was examined. (author)

Challenges of technical cooperation in the petroleum industry

International Nuclear Information System (INIS)

Al-Athel, S.A.

1992-01-01

The need and prospects for international technical cooperation in the petroleum industry are reviewed. Since it directly affects the survival of the inhabitants of the planet, environmental protection is a field that could enjoy maximum international cooperation; oil spills, product environmental hazards, waste minimization and disposal and oil field fires are the main areas identified. Technical cooperation in other areas of the industry, namely exploration, production, oil field development, refining and petrochemicals, may involve some controversy. Attention is drawn to the conflicting interests of multinational companies, who almost completely control the technology of these activities, and host developing countries. It is advocated that arrangements involving technology transfer should make provision for the growth of indigenous technology. (UK)

75 FR 32857 - Adjustment of Royalty Fee for Cable Compulsory License

Science.gov (United States)

2010-06-10

... LIBRARY OF CONGRESS Copyright Office 37 CFR Part 256 Adjustment of Royalty Fee for Cable Compulsory License CFR Correction In Title 37 of the Code of Federal Regulations, revised as of July 1, 2009, on page 666, in Sec. 256.2, make the following changes: a. In paragraph (b)(2)(i), remove ``$189,800...

Optimization of protection as a decision-making tool for radioactive waste disposal

International Nuclear Information System (INIS)

Bragg, K.

1988-03-01

This paper discusses whether optimization of radiation protection is a workable or helpful concept or tool with respect to decisions in the field of long-term radioactive waste management. Examples of three waste types (high-level, low-level and uranium mine tailings) are used to illustrate that actual decisions are made taking account of more complex factors and that optimization of protection plays a relatively minor role. It is thus concluded that it is not a useful general tool for waste management decision-making. Discussion of the nature of the differences between technical and non-technical factors is also presented along with suggestions to help facilitate future decision-making

Accounting for technical noise in differential expression analysis of single-cell RNA sequencing data.

Science.gov (United States)

Jia, Cheng; Hu, Yu; Kelly, Derek; Kim, Junhyong; Li, Mingyao; Zhang, Nancy R

2017-11-02

Recent technological breakthroughs have made it possible to measure RNA expression at the single-cell level, thus paving the way for exploring expression heterogeneity among individual cells. Current single-cell RNA sequencing (scRNA-seq) protocols are complex and introduce technical biases that vary across cells, which can bias downstream analysis without proper adjustment. To account for cell-to-cell technical differences, we propose a statistical framework, TASC (Toolkit for Analysis of Single Cell RNA-seq), an empirical Bayes approach to reliably model the cell-specific dropout rates and amplification bias by use of external RNA spike-ins. TASC incorporates the technical parameters, which reflect cell-to-cell batch effects, into a hierarchical mixture model to estimate the biological variance of a gene and detect differentially expressed genes. More importantly, TASC is able to adjust for covariates to further eliminate confounding that may originate from cell size and cell cycle differences. In simulation and real scRNA-seq data, TASC achieves accurate Type I error control and displays competitive sensitivity and improved robustness to batch effects in differential expression analysis, compared to existing methods. TASC is programmed to be computationally efficient, taking advantage of multi-threaded parallelization. We believe that TASC will provide a robust platform for researchers to leverage the power of scRNA-seq. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

Socially weighted linear composites in environmental decision making

International Nuclear Information System (INIS)

Hebert, J.A.; Lindell, M.K.; Maynard, W.S.; Nealey, S.M.; Burnham, J.B.

1975-11-01

A method for combining social values and technical information, for environmental decision making for the selection of a site for a nuclear power plant is described. Eight factors are identified by which six different thermal power plant site and design options could be evaluated. A method is described by which the factors could be weighted by social values and the weighted factor scores could be summed for each option. These weighted sums can then be compared with each other in order to determine the best choice from both a social and a technical point of view

Flexible Conflict Management: Conflict Avoidance and Conflict Adjustment in Reactive Cognitive Control

Science.gov (United States)

Dignath, David; Kiesel, Andrea; Eder, Andreas B.

2015-01-01

Conflict processing is assumed to serve two crucial, yet distinct functions: Regarding task performance, control is adjusted to overcome the conflict. Regarding task choice, control is harnessed to bias decision making away from the source of conflict. Despite recent theoretical progress, until now two lines of research addressed these…

The Problem of Socio-Psychological Adjustment of Personality in the Scientists' Studies

Science.gov (United States)

Serebryakova, ?atyana A.; Morozova, Lyudmila B.; Kochneva, Elena M.; Zharova, Darya V.; Skitnevskaya, Larisa V.; Kostina, Olga A.

2016-01-01

Instability and unpredictability of the present stage of social development make the study of social and psychological adjustment of personality to the social environment a highly topical issue. The article presents the results of an empirical research on social personality adaptation. Evident is the close relations between social and…

Building a Foundational Model for Credit for Prior Learning. Strategies for Transformative Change

Science.gov (United States)

Kamps, A.; Loritz, T.; Schaff, E.; Richie, D.

2016-01-01

"Making the Future: The Wisconsin Strategy," under the leadership of Northeast Wisconsin Technical College (NWTC), received a Round Two U.S. Department of Labor Trade Adjustment Assistance for Community College and Career Training (TAACCCT) grant. The consortium brought together all 16 colleges in the Wisconsin Technical College System…

Technical tasks in superconducting cavities

Energy Technology Data Exchange (ETDEWEB)

Saito, Kenji [High Energy Accelerator Research Organization, Tsukuba, Ibaraki (Japan)

1997-11-01

The feature of superconducting rf cavities is an extremely small surface resistance on the wall. It brings a large energy saving in the operation, even those are cooled with liquid helium. That also makes possible to operate themselves in a higher field gradient comparing to normal conducting cavities, and brings to make accelerators compact. These merits are very important for the future accelerator engineering which is planed at JAERI for the neutron material science and nuclear waste transmutation. This machine is a high intensity proton linac and uses sc cavities in the medium and high {beta} sections. In this paper, starting R and D of proton superconducting cavities, several important technical points which come from the small surface resistance of sc cavities, are present to succeed it and also differences between the medium and high - {beta} structures are discussed. (author)

A simple signaling rule for variable life-adjusted display derived from an equivalent risk-adjusted CUSUM chart.

Science.gov (United States)

Wittenberg, Philipp; Gan, Fah Fatt; Knoth, Sven

2018-04-17

The variable life-adjusted display (VLAD) is the first risk-adjusted graphical procedure proposed in the literature for monitoring the performance of a surgeon. It displays the cumulative sum of expected minus observed deaths. It has since become highly popular because the statistic plotted is easy to understand. But it is also easy to misinterpret a surgeon's performance by utilizing the VLAD, potentially leading to grave consequences. The problem of misinterpretation is essentially caused by the variance of the VLAD's statistic that increases with sample size. In order for the VLAD to be truly useful, a simple signaling rule is desperately needed. Various forms of signaling rules have been developed, but they are usually quite complicated. Without signaling rules, making inferences using the VLAD alone is difficult if not misleading. In this paper, we establish an equivalence between a VLAD with V-mask and a risk-adjusted cumulative sum (RA-CUSUM) chart based on the difference between the estimated probability of death and surgical outcome. Average run length analysis based on simulation shows that this particular RA-CUSUM chart has similar performance as compared to the established RA-CUSUM chart based on the log-likelihood ratio statistic obtained by testing the odds ratio of death. We provide a simple design procedure for determining the V-mask parameters based on a resampling approach. Resampling from a real data set ensures that these parameters can be estimated appropriately. Finally, we illustrate the monitoring of a real surgeon's performance using VLAD with V-mask. Copyright © 2018 John Wiley & Sons, Ltd.

NASA Space Environments Technical Discipline Team Space Weather Activities

Science.gov (United States)

Minow, J. I.; Nicholas, A. C.; Parker, L. N.; Xapsos, M.; Walker, P. W.; Stauffer, C.

2017-12-01

The Space Environment Technical Discipline Team (TDT) is a technical organization led by NASA's Technical Fellow for Space Environments that supports NASA's Office of the Chief Engineer through the NASA Engineering and Safety Center. The Space Environments TDT conducts independent technical assessments related to the space environment and space weather impacts on spacecraft for NASA programs and provides technical expertise to NASA management and programs where required. This presentation will highlight the status of applied space weather activities within the Space Environment TDT that support development of operational space weather applications and a better understanding of the impacts of space weather on space systems. We will first discuss a tool that has been developed for evaluating space weather launch constraints that are used to protect launch vehicles from hazardous space weather. We then describe an effort to better characterize three-dimensional radiation transport for CubeSat spacecraft and processing of micro-dosimeter data from the International Space Station which the team plans to make available to the space science community. Finally, we will conclude with a quick description of an effort to maintain access to the real-time solar wind data provided by the Advanced Composition Explorer satellite at the Sun-Earth L1 point.

Technical and economic analysis of hydrogen refuelling

International Nuclear Information System (INIS)

Nistor, Silviu; Dave, Saraansh; Fan, Zhong; Sooriyabandara, Mahesh

2016-01-01

Highlights: • Technical and economic models of a hydrogen station for vehicles refuelling. • Hydrogen demand from fuel cell electric vehicles modelled stochastically. • Study case based on a UK pilot project. • Operation of the H_2 station using combined energy from wind and power grid is preferred. • Return on investment of 5–10 years is possible for the hydrogen station. - Abstract: This paper focuses on technical and economic analysis of a hydrogen refilling station to provide operational insight through tight coupling of technical models of physical processes and economic models. This allows the dynamic relationships of the system to be captured and analysed to provide short/medium term analytical capability to support system design, planning, and financing. The modelling developed here highlights the need to closely link technical and economic models for technology led projects where technical capability and commercial feasibility are important. The results show that hydrogen fuel can be competitive with petrol on a GBP/KG basis if the return on investment period is over 10 years for PEM electrolysers and 5 for Alkaline electrolysers. We also show that subsidies on capital costs (as reflected by some R&D funding programs) make both PEM and Alkaline technologies cheaper than the equivalent price of petrol, which suggests more emphasis should be put on commercialising R&D funded projects as they have commercial advantages. The paper also shows that a combined wind and grid connected station is preferable so that a higher number of customers are served (i.e. minimum shortage of hydrogen).

Annual Adjustment Factors

Data.gov (United States)

Department of Housing and Urban Development — The Department of Housing and Urban Development establishes the rent adjustment factors - called Annual Adjustment Factors (AAFs) - on the basis of Consumer Price...

The Role of the Technical Specialist in Disaster Response and Recovery

Science.gov (United States)

Curtis, J. C.

2017-12-01

Technical Specialists provide scientific expertise for making operational decisions during natural hazards emergencies. Technical Specialists are important members of any Incident Management Team (IMT) as is described in in the National Incident Management System (NIMS) that has been designed to respond to emergencies. Safety for the responders and the threatened population is the foremost consideration in command decisions and objectives, and the Technical Specialist is on scene and in the command post to support and promote safety while aiding decisions for incident objectives. The Technical Specialist's expertise can also support plans, logistics, and even finance as well as operations. This presentation will provide actual examples of the value of on-scene Technical Specialists, using National Weather Service "Decision Support Meteorologists" and "Incident Meteorologists". These examples will demonstrate the critical role of scientists that are trained in advising and presenting life-critical analysis and forecasts during emergencies. A case will be made for local, state, and/or a national registry of trained and deployment-ready scientists that can support emergency response.

Methodology for teaching technical pattern of lying, sport shooting. Mistakes often.

Directory of Open Access Journals (Sweden)

Yaydel Avila Gómez

2011-09-01

Full Text Available The next album we set out a summary of the key technical elements for a good development of the prone position, bearing in mind that sometimes violate some methodological steps for teaching the same in athletes who play sports Shooting sports Rifle mode, which creates bad habits in the teaching of the position are difficult to eradicate later. We proceeded to perform the following steps. Criteria for experts to determine methodological steps to be taken into account in the teaching of technical pattern prone position; query bibliographic elements of the sport, the explanation of the basic technical elements; survey a group of coaches in the form of Rifle for the determination of the most common mistakes in the process of teaching the technical pattern of the prone position. It came to the conclusion that teaching the correct technical pattern that position must be taken into account methodological steps which do not allow making any error that would create a dynamic stereotype wrong in athletes who subsequently would be difficult to resolve.

Convexity Adjustments for ATS Models

DEFF Research Database (Denmark)

Murgoci, Agatha; Gaspar, Raquel M.

. As a result we classify convexity adjustments into forward adjustments and swaps adjustments. We, then, focus on affine term structure (ATS) models and, in this context, conjecture convexity adjustments should be related of affine functionals. In the case of forward adjustments, we show how to obtain exact...

Technical standards in the law of technical safety

International Nuclear Information System (INIS)

Marburger, P.

1985-01-01

Technical standards are of great importance for the closer definition of inexact terms of law, for instance ''generally accepted technical rules'', ''state of the art'', ''state of science and technology'' or similar normative terms, in the law of technical safety. The paper discusses with whom the authority for regulating this sector of law rests, deals with the different ways of how technical standards are used by the law (''anticipated expert opinion'', reference to such standards in law and administration) and points out demands on the procedure of standardization. (orig.) [de

The impact of health and financial literacy on decision making in community-based older adults.

Science.gov (United States)

James, Bryan D; Boyle, Patricia A; Bennett, Jarred S; Bennett, David A

2012-01-01

Health and financial literacy have been linked to the health and well-being of older adults, yet there are few data on how health and financial literacy actually impact decision making regarding healthcare and economic choices in advanced age. To examine the association of health and financial literacy with decision making in older adults. Data came from 525 community-dwelling older persons without dementia from the Rush Memory and Aging Project, an ongoing longitudinal study of aging. Health and financial literacy were assessed via a series of questions designed to measure comprehension of health and financial information and concepts. The two scores were averaged to yield a total literacy score. A modified, 12-item version of the Decision-Making Competence Assessment Tool was used to measure financial and healthcare decision making (6 items each), using materials designed to approximate those used in real world settings. All 12 items were summed to yield a total decision-making score. Associations were tested via linear regression models adjusted for age, sex and education. Secondary models adjusted for global cognitive function, income, depression and chronic medical conditions. On average, participants correctly answered 67% of the literacy questions (health literacy = 61.6%, SD = 18.8% and financial literacy = 72.5%, SD = 16.0%). After adjustment for cognitive function, the total literacy score was positively associated with the decision-making total score (estimate = 0.64, SE = 0.08, p financial decision making (estimate = 0.28, SE = 0.05, p literacy, health and financial literacy all were independently associated with decision making in models adjusted for covariates including income, depression, and chronic medical conditions (all p values literacy and healthcare decision making was stronger among older persons, poorer persons and persons at the lower ranges of cognitive ability. Among community based older persons without dementia, higher levels of health

76 FR 64083 - Reliability Technical Conference; Notice of Technical Conference

Science.gov (United States)

2011-10-17

... Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, November 29, 2011, from 1 p.m. to 5 p.m. and... reliability that were identified in earlier Commission technical conferences. The conference also will discuss...

Grain intermodal terminals: evaluation of pure technical efficiency by Data Envelopment Analysis

Directory of Open Access Journals (Sweden)

Maria Gabriela Mendonça Peixoto

Full Text Available Abstract This paper aimed to verify if terminals with productive efficiency also have pure technical efficiency, using DEA (Data Envelopment Analysis technique. The research approach was the qualitative-quantitative or mixed, with exploratory purpose; the research method defined was the case study (multicases; data were collected through interviews using a structured questionnaire and non-probability for convenience sampling. While the application of Charnes, Cooper and Rhodes (CCR model observed that only three (4, 7 and 11, of the twelve analyzed Decision Making Units (DMUs have total technical efficiency, through Banker, Charnes and Cooper (BCC model, it was possible to observe that these terminals were the only ones with pure technical efficiency. The three inefficient DMUs (1, 2 and 12 showed pure technical efficiency, suggesting that these terminals might present probable scale operations’ inefficiency, aspect not addressed in this paper.

Teaching Technical Writing - Towards Technical Writing

DEFF Research Database (Denmark)

Kastberg, Peter

2000-01-01

In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm that ...... of technical writing.......In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm...... that used to govern what the quality of an LSP text should be as opposed to the standpoint, which I advocate. By way of summing up, I will show how a university curriculum is designed so that - upon graduation - the technical translator could also be methodological quite well suited to take on the challenge...

Study on the Technical Efficiency of Creative Human Capital in China by Three-Stage Data Envelopment Analysis Model

Directory of Open Access Journals (Sweden)

Jian Ma

2014-01-01

Full Text Available Previous researches have proved the positive effect of creative human capital and its development on the development of economy. Yet, the technical efficiency of creative human capital and its effects are still under research. The authors are trying to estimate the technical efficiency value in Chinese context, which is adjusted by the environmental variables and statistical noises, by establishing a three-stage data envelopment analysis model, using data from 2003 to 2010. The research results indicate that, in this period, the entirety of creative human capital in China and the technical efficiency value in different regions and different provinces is still in the low level and could be promoted. Otherwise, technical non-efficiency is mostly derived from the scale nonefficiency and rarely affected by pure technical efficiency. The research also examines environmental variables’ marked effects on the technical efficiency, and it shows that different environmental variables differ in the aspect of their own effects. The expansion of the scale of education, development of healthy environment, growth of GDP, development of skill training, and population migration could reduce the input of creative human capital and promote the technical efficiency, while development of trade and institutional change, on the contrary, would block the input of creative human capital and the promotion the technical efficiency.

Salt Repository Project: FY 85 technical project plan

International Nuclear Information System (INIS)

1985-07-01

The FY 85 technical plan for the Salt Repository Project is briefly presented. The objectives of the project in relation to the Civilian Radioactive Waste Management Program are discussed, and the technical activities directed toward accomplishing these objectives are detailed. A budget is presented for each of the Level 2 work breakdown structure tasks (Systems, Waste Package, Site, Repository, Regulatory and Institutional, Exploratory Shaft, Test Facilities, Land Acquisition, and Project Management) in the various sections. An overall description, current status, and planned activities are presented for each of the subtasks which make up the above-mentioned Level 2 tasks. A strategy diagram and a master schedule are included and each of the milestones is also listed chronologically in the sections

Salt Repository Project. FY-84 technical project plan

International Nuclear Information System (INIS)

1984-08-01

The FY 84 technical plans for the Salt Repository Project (SRP) are briefly presented. The objectives of the project in relation to the Civilian Radioactive Waste Management (CRWM) program are discused and the technical activities directed toward accomplishing these objectives are detailed. A budget is presented for each of the Level 2 Work Breakdown Structure Tasks (Systems, Waste Package, Site, Repository, Regulatory and Institutional, Test Facilities, Exploratory Shaft, Land Acquisition, and Program Management) in an appendix. An overall description, current status, and planned activities are presented for each of the subtasks which make up the above-mentioned Level 2 tasks. Milestones and their definitions for the plan year, as well as milestones for the outyears are also presented at this same subtask level for each subtask

The use of a checklist improves anaesthesiologists' technical and non-technical performance for simulated malignant hyperthermia management.

Science.gov (United States)

Hardy, Jean-Baptiste; Gouin, Antoine; Damm, Cédric; Compère, Vincent; Veber, Benoît; Dureuil, Bertrand

2018-02-01

Anaesthesiologists may occasionally manage life-threatening operating room (OR) emergencies. Managing OR emergencies implies real-time analysis of often complicated situations, prompt medical knowledge retrieval, coordinated teamwork and effective decision making in stressful settings. Checklists are recommended to improve performance and reduce the risk of medical errors. This study aimed to assess the usefulness of the French Society of Anaesthesia and Intensive Care's (SFAR) "Malignant Hyperthermia" (MH) checklist on a simulated episode of MH crisis and management thereof by registered anesthesiologists. Twenty-four anaesthesiologists were allocated to 2 groups (checklist and control). Their technical performance in adherence with the SFAR guidelines was assessed by a 30-point score and their non-technical performance was assessed by the Anaesthetists' Non-Technical Skills (ANTS) score. Every task completion was assessed independently. Data are shown as median (first-third quartiles). Anaesthesiologists in the checklist group had higher technical performance scores (24/30 (21.5-25) vs 18/30 (15.5-19.5), P=0.002) and ANTS scores (56.5/60 (47.5-58) vs 48.5/60 (41-50.5), P=0.024). They administered the complete initial dose of dantrolene (2mg/kg) more quickly (15.7 minutes [13.9-18.3] vs 22.4 minutes [18.6-25]) than the control group (P=0.017). However, anaesthesiologists deemed the usability of the checklist to be perfectible. Registered anaesthesiologists' use of the MH checklist during a simulation session widely improved their adherence to guidelines and non-technical skills. This study strongly suggests the benefit of checklist tools for emergency management. Notwithstanding, better awareness and training for anaesthesiologists could further improve the use of this tool. Copyright © 2017 Société française d'anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

Study of the technical specifications for the diesels generator of Juragua NPP

International Nuclear Information System (INIS)

Vilaragut Llanes, J.J.

1996-01-01

The Technical Specifications of a nuclear power plant specify the limits for plant operation from the safety point of view. These operational safety rules were originally defined on the basis of deterministic analysis and engineering judgement. The Probabilistic safety Assessment, constitutes a tool to analyze of the risk effect in the Technical Specifications Rules, and makes possible a relative comparison of the rules from the risk point of view. This paper studies the technical specifications for the diesels generators of Juragua Nuclear Power Plant and for that was used the probabilistic methodology . It is presented the evaluation of the some parameters as surveillance testing, test interval, repairs time, diesel degradation and AOT

Couple adjustment to a stressful life event: a dyadic investigation of the roles of positive reframing and perceived benefits.

Science.gov (United States)

Samios, Christina; Baran, Shayne

2018-03-01

This study examines positive reframing (a form of meaning making), perceived benefits (a form of meanings made) and adjustment in couples who experienced a stressful life event in the past year. This study tested whether couple members' scores were nonindependent and whether one's own perceived benefits was predicted by their own positive reframing (actor effect) as well as their partner's positive reframing (partner effect). Further, this study tested actor and partner effects for the link between perceived benefits and adjustment and whether positive reframing (the initial variable) works through perceived benefits (the mediator) to affect adjustment (the outcome) at the dyadic level. A standard dyadic design was used. Eighty couples completed measures of positive reframing, perceived benefits, and adjustment (depression, anxiety, positive affect, life satisfaction, and relationship satisfaction). Partners' scores on study variables were related, and although only actor effects were found for the path between positive reframing and perceived benefits, both actor and partner effects were found for the path between perceived benefits and adjustment. Mediation was found for actor-actor and actor-partner indirect effects. Results indicate that a greater focus on interpersonal factors is needed to further meaning-making theory and inform practice.

Nuclear regulatory decision making

International Nuclear Information System (INIS)

2005-01-01

The fundamental objective of all nuclear safety regulatory bodies is to ensure that nuclear utilities operate their plants at all times in an acceptably safe manner. In meeting this objective, the regulatory body should strive to ensure that its regulatory decisions are technically sound, consistent from case to case, and timely. In addition, the regulator must be aware that its decisions and the circumstances surrounding those decisions can affect how its stakeholders, such as government policy makers, the industry it regulates, and the public, view it as an effective and credible regulator. In order to maintain the confidence of those stakeholders, the regulator should make sure that its decisions are transparent, have a clear basis in law and regulations, and are seen by impartial observers to be fair to all parties. Based on the work of a Nuclear Energy Agency (NEA) expert group, this report discusses some of the basic principles and criteria that a regulatory body should consider in making decisions and describes the elements of an integrated framework for regulatory decision making. (author)

IT portfolio decision-making in local governments

DEFF Research Database (Denmark)

Agger Nielsen, Jeppe; Pedersen, Keld

2014-01-01

by the IT PPM literature) plays a minor role. Our account also reveals how the decision-making practices create IT portfolio problems and in some aspects is considered to have a negative impact on the outcome of e-government investments. Our analysis and previous research into decision-making allows us to argue......IT project portfolio management (IT PPM) has evolved into a significant area of research interest, but we know little about IT PPM practices in public sector organizations. Therefore this article investigates decision-making processes in the IT PPM practices of local governments, and discusses how...... these practices match the normative advice proposed by the IT PPMliterature.We rely on decision-making theories togetherwith case-studies of four Danish local governments.We find that politics, intuition and coincidence play a crucial role in IT PPM decisionmaking, while technical rationality (as proposed...

Development of a support system to make economic and technical assessments for the issues relating to plant life extension

International Nuclear Information System (INIS)

Takao, T.; Soneda, N.; Sakai, T.

1994-01-01

To realize the life extension of nuclear power plants, overall evaluation for the plant is required, which covers technology, economy such as cost of repair or/and replacement of components, and regal regulations for licensing. A prototype of integrated assessment support system for life extension ''INPLEX'' have developed in order to evaluate the technical and economic issues relating to the plant life extension and to make a life extension scenario. Analysis procedure of INPLEX is as follows. A comparison of the cost between the life extension and the reconstruction is made to see whether the life extension is cost effective or not. Next, components required detailed assessments are selected, and the residual life assessment of these components are made. After those procedures life extension measures are selected and the implementation time schedule is set on the basis of the formulas for predicting the degradation of the components and the component reliability data. Finally the implementation time schedule is optimized from the viewpoint of economy, and the life extension scenario is proposed. INPLEX also has the data base ''PRINS'', in which information and data related to life extension are registered, such as component degradation experiences, degradation management methodologies, degradation mitigation measures, and so on. PRINS can be referred at any time during the operation of INPLEX

Definitive Readings in the History, Philosophy, Theories and Practice of Career and Technical Education

Science.gov (United States)

Wang, Victor C. X., Ed.

2010-01-01

In this information age, career and technical education (CTE) has become a multibillion dollar training enterprise. To make the students more competitive in the labor force and to make the nation economically strong and firms internationally competitive, everyone has to depend on CTE to train today's workers of various kinds. This book brings…

Jump Testing and the Speed of Market Adjustment

DEFF Research Database (Denmark)

Rasmussen, Torben B.

Asymptotic properties of jump tests rely on the property that any jump occurs within a single time interval no matter what the observation frequency is. Market microstructure effects in relation to news-induced revaluation of the underlying variable is likely to make this an unrealistic assumption...... for high-frequency transaction data. To capture these microstructure effects, this paper suggests a model in which market prices adjust gradually to jumps in the underlying effcient price. A case study illustrates the empirical relevance of the model, and the performance of different jump tests...

Risk-Informed Decision Making: Application to Technology Development Alternative Selection

Science.gov (United States)

Dezfuli, Homayoon; Maggio, Gaspare; Everett, Christopher

2010-01-01

NASA NPR 8000.4A, Agency Risk Management Procedural Requirements, defines risk management in terms of two complementary processes: Risk-informed Decision Making (RIDM) and Continuous Risk Management (CRM). The RIDM process is used to inform decision making by emphasizing proper use of risk analysis to make decisions that impact all mission execution domains (e.g., safety, technical, cost, and schedule) for program/projects and mission support organizations. The RIDM process supports the selection of an alternative prior to program commitment. The CRM process is used to manage risk associated with the implementation of the selected alternative. The two processes work together to foster proactive risk management at NASA. The Office of Safety and Mission Assurance at NASA Headquarters has developed a technical handbook to provide guidance for implementing the RIDM process in the context of NASA risk management and systems engineering. This paper summarizes the key concepts and procedures of the RIDM process as presented in the handbook, and also illustrates how the RIDM process can be applied to the selection of technology investments as NASA's new technology development programs are initiated.

CERN Technical Training: Signal Processor

CERN Multimedia

HR Department

2009-01-01

A new training is going to be held at CERN on the ADSP SHARC Family. The "System Development and Programming with the Analog Devices’ SHARC Family" course is a 3.5-day hands-on training on Analog Devices SHARC DSPs, focusing on the latest ‘368/9 and 37x families. General DSP architecture, peripherals available, booting up process and DSP code development will be covered. Hardware tools, debugging and hardware design guidelines will be introduced as well. The course id designed for System Designers needing to make informed decisions on design tradeoffs, Hardware Designers needing to develop external interfaces, and Code Developers needing to know how to get the highest performance from their algorithms. The course will take place, in English, from 31 March to 4 April in the CERN Technical Training Center. Few places are still available. Registrations are opened on the Technical Training page. More information on our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your que...

Denmark; Systemic Issues in Mortgage Loans and Covered Bond Finance: Technical Note

OpenAIRE

International Monetary Fund

2014-01-01

This technical note analyzes systemic issues in mortgage loans and covered bond finance in Denmark. Mortgage lending has seen significant product innovation in recent years. Loans with adjustable interest rates and/or interest-only periods, which have been introduced since the late 1990s, had grown to 75 percent and 53 percent, respectively, of total outstanding mortgage loans at the end of 2013. The major changes in the characteristics of the underlying mortgage loans have naturally been ref...

Ergonomic requirements for the operation of machines and technical equipment

Directory of Open Access Journals (Sweden)

Górny Adam

2017-01-01

Full Text Available In order to operate machinery and equipment safely, it is critical for the solutions in place to conform to design-related and operating requirements. Design-related requirements are primarily the responsibility of machine designers/developers and manufacturers. Operating requirements should be satisfied by employers, who are responsible for ensuring safe working conditions for their employees. Under applicable laws, machinery and equipment should be designed, produced and then operated without placing excessive loads on workers and in keeping with machine functionality and intended use. One should also ensure that machinery and equipment can be maintained and adjusted without exposing their operators to hazards. Ergonomic criteria are an integral part of such requirements. They ensure that human users and operators of technical equipment are enabled to function properly. Design-related requirements are viewed as a priority safety consideration. While they facilitate the use of technical tools, the actual safety of employees ultimately depends on the satisfaction of specific requirements during operation.

A study on the major influencing factors in decision-making in abnormal radiological situations

International Nuclear Information System (INIS)

Kang, B. W.; Kim, S. K.

2001-01-01

This paper describes the task of the technical advisers within the off-site emergency response organization in nuclear accident. They shall be collected and evaluated all influencing factors relevant in decision-making process. The major influencing objective factors are the results of radiological and economic consequence assessments. However, it is associated with uncertainties in predictions dependent of the phase of the accident. Important other factors emerge from subjective arguments between technical advisers in decision-making process. By theirs different opinions, the decision maker who is lack of experience and knowledge has a much more difficult to make and implement the emergency actions. Therefore, the practically considerations in a concrete emergency situation are timely implemented the emergency actions result from already existing plans. The actual process of decision-making consists in identifying in a iterative process implementing individual actions or a set of combined action

78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

Science.gov (United States)

2013-05-13

... Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, July 9, 2013 from 9:00 a.m. to 5:00 p.m. This... technical support for webcasts and offers the option of listening to the meeting via phone-bridge for a fee...

Transportation Technical Environmental Information Center index

Energy Technology Data Exchange (ETDEWEB)

Davidson, C. A.; Foley, J. T.

1980-10-01

In an effort to determine the environmental intensities to which energy materials in transit may be exposed, a Data Center of technical environmental information has been established by Sandia National Laboratories, Division 5523, for the DOE Office of Transportation Fuel Storage. This document is an index which can be used to request data of interest. Access to the information held is not limited to Sandia personnel. The purpose of the Transportation Technical Environmental Information Center is to collect, analyze, store, and make available descriptions of the environment of transportation expressed in engineering terms. The data stored in the Center are expected to be useful in a variety of transportation related analyses. Formulations of environmental criteria for shipment of cargo, risk assessments, and detailed structural analyses of shipping containers are examples where these data have been applied. For purposes of indexing and data retrieval, the data are catalogued under two major headings: Normal and Abnormal Environments.

Transportation Technical Environmental Information Center index

International Nuclear Information System (INIS)

Davidson, C.A.; Foley, J.T.

1980-10-01

In an effort to determine the environmental intensities to which energy materials in transit may be exposed, a Data Center of technical environmental information has been established by Sandia National Laboratories, Division 5523, for the DOE Office of Transportation Fuel Storage. This document is an index which can be used to request data of interest. Access to the information held is not limited to Sandia personnel. The purpose of the Transportation Technical Environmental Information Center is to collect, analyze, store, and make available descriptions of the environment of transportation expressed in engineering terms. The data stored in the Center are expected to be useful in a variety of transportation related analyses. Formulations of environmental criteria for shipment of cargo, risk assessments, and detailed structural analyses of shipping containers are examples where these data have been applied. For purposes of indexing and data retrieval, the data are catalogued under two major headings: Normal and Abnormal Environments

CERN Technical Training: Digital Signal Processors

CERN Multimedia

HR Department

2009-01-01

A new training is going to be held at CERN on the ADSP SHARC Family. The “System Development and Programming with the Analog Devices' SHARC Family” course is a 3.5-day hands-on training on Analog Devices SHARC DSPs, focusing on the latest ‘368/9 and 37x families. General DSP architecture, peripherals available, booting up process and DSP code development will be covered. Hardware tools, debugging and hardware design guidelines will be introduced as well. The course id designed for System Designers needing to make informed decisions on design tradeoffs, Hardware Designers needing to develop external interfaces, and Code Developers needing to know how to get the highest performance from their algorithms. The course will take place, in English, from 31 March to 4 April in the CERN Technical Training Center. Few places are still available. Registrations are opened on the Technical Training page. More information on our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or conta...

High Resolution Adjustable Mirror Control for X-ray Astronomy

Science.gov (United States)

Trolier-McKinstry, Susan

We propose to build and test thin film transistor control circuitry for a new highresolution adjustable X-ray mirror technology. This control circuitry will greatly simplify the wiring scheme to address individual actuator cells. The result will be a transformative improvement for the X-ray Surveyor mission concept: mathematical models, which fit the experimental data quite well, indicate that 0.5 arcsecond imaging is feasible through this technique utilizing thin slumped glass substrates with uncorrected angular resolution of order 5-10 arcseconds. In order to correct for figures errors in a telescope with several square meters of collecting area, millions of actuator cells must be set and held at specific voltages. It is clearly not feasible to do this via millions of wires, each one connected to an actuator. Instead, we propose to develop and test thin-film technology that operates on the same principle as megapixel computer screens. We will develop the technologies needed to build thin film piezoelectric actuators, controlled by thin film ZnO transistors, on flexible polyimide films, and to connect those films to the back surfaces of X-ray mirrors on thin glass substrates without deforming the surface. These technologies represent a promising avenue of the development of mirrors for the X-Ray Surveyor mission concept. Such a telescope will make possible detailed studies of a wide variety of astrophysical sources. One example is the Warm-Hot Intergalactic Medium (WHIM), which is thought to account for a large fraction of the normal matter in the universe but which has not been detected unambiguously to date. Another is the growth of supermassive black holes in the early universe. This proposal supports NASA's goals of technical advancement of technologies suitable for future missions, and training of graduate students.

Study of the method of placing technical stations

Directory of Open Access Journals (Sweden)

Sattorov S.B.

2017-12-01

Full Text Available At present, the organization of transportation by rail is associated with the processing of trains and wagons along the route. Accommodation and equipping of technical stations play a major role in the organization of the transportation process. The uninterrupted operation of the technical stations ensures the stability of the railway transport as a whole. The distance between the technical stations determines the duration of operation of the locomotive crew, the efficient use of the locomotive, the required number of locomotive crews and locomotives for carrying out the transportation plan, and also improves the main indicators of the railway. However, often train locomotives do not fulfill their assigned tasks due to the lack of time for the locomotive crew in order to deliver the train to the nearest technical station, as well as the irrational use of the standard time of the locomotive crew. In connection with the expectation of delivery, the locomotive brigade replacing the locomotive, the idle time of the wagons at the intermediate stations increases. All this makes it difficult to control the movement of trains and reduces the speed of moving cars on the railway transport. The purpose of the study is to develop a method for placing technical stations on a railway test site in the course of an electric traction. To achieve this goal, it will be necessary to solve the following tasks: generalization of the main parameters of the location of technical stations; determination of half-races between technical stations in the operation of one locomotive brigade; search for the required number of change of the locomotive brigade; determination of the distance between technical stations. The methods of research are based on the generalization and analysis of existing results in finding the rational location of technical stations. Results: It is revealed that the first step for the rational placement of technical stations is to determine the

Ideal Based Cyber Security Technical Metrics for Control Systems

Energy Technology Data Exchange (ETDEWEB)

W. F. Boyer; M. A. McQueen

2007-10-01

Much of the world's critical infrastructure is at risk from attack through electronic networks connected to control systems. Security metrics are important because they provide the basis for management decisions that affect the protection of the infrastructure. A cyber security technical metric is the security relevant output from an explicit mathematical model that makes use of objective measurements of a technical object. A specific set of technical security metrics are proposed for use by the operators of control systems. Our proposed metrics are based on seven security ideals associated with seven corresponding abstract dimensions of security. We have defined at least one metric for each of the seven ideals. Each metric is a measure of how nearly the associated ideal has been achieved. These seven ideals provide a useful structure for further metrics development. A case study shows how the proposed metrics can be applied to an operational control system.

Technical presentation

CERN Document Server

FI Department

2008-01-01

RADIOSPARES, the leading catalogue distributor of components (electronic, electrical, automation, etc.) and industrial supplies will be at CERN on Friday 3 October 2008 (Main Building, Room B, from 9.00 a.m. to 3.00 p.m.) to introduce its new 2008/2009 catalogue. This will be the opportunity for us to present our complete range of products in more detail: 400 000 part numbers available on our web site (Radiospares France, RS International, extended range of components from other manufacturers); our new services: quotations, search for products not included in the catalogue, SBP products (Small Batch Production: packaging in quantities adapted to customers’ requirements); partnership with our focus manufacturers; demonstration of the on-line purchasing tool implemented on our web site in conjunction with CERN. RADIOSPARES will be accompanied by representatives of FLUKE and TYCO ELECTRONICS, who will make presentations, demonstrate materials and answer any technical questio...

CERN Technical Training - New courses available at CERN!

CERN Multimedia

HR Department

2010-01-01

1. - The “JavaScript for web development” is a 3 day course. This hands-on JavaScript training course provides the knowledge needed to design and develop dynamic web pages using JavaScript. It introduces students to JavaScript and how the language can be used to turn static HTML pages into dynamic, interactive web pages. Students will learn the syntax of the JavaScript language, the Document Object Model, form validation, cookies, how to create functions. This course is for Web programmers who want to learn how to make their Web pages more interactive by using JavaScript. The course will take place, in English, from 5 to 7 May 2010 in the CERN Technical Training Centre. Registrations are open on the Technical Training page. For more information on our catalogue or for questions/comments, contact us at Technical.Training@cern.ch 2. - The “Web 2.0 development with AJAX” is a 3 day course. This hands-on AJAX course provides the knowledge needed to design and develop ...

Adaptive management: The U.S. Department of the Interior technical guide

Science.gov (United States)

Williams, B K; Szaro, Robert C.; Shapiro, Carl D.

2009-01-01

The purpose of this technical guide is to present an operational definition of adaptive management, identify the conditions in which adaptive management should be considered, and describe the process of using adaptive management for managing natural resources. The guide is not an exhaustive discussion of adaptive management, nor does it include detailed specifications for individual projects. However, it should aid U.S. Department of the Interior (DOI) managers and practitioners in determining when and how to apply adaptive management. Adaptive management is framed within the context of structured decision making, with an emphasis on uncertainty about resource responses to management actions and the value of reducing that uncertainty to improve management. Though learning plays a key role in adaptive management, it is seen here as a means to an end, namely good management, and not an end in itself. The operational definition used in the guide is adopted from the National Research Council, which characterizes adaptive management as an iterative learning process producing improved understanding and improved management over time: Adaptive management [is a decision process that] promotes flexible decision making that can be adjusted in the face of uncertainties as outcomes from management actions and other events become better understood. Careful monitoring of these outcomes both advances scientific understanding and helps adjust policies or operations as part of an iterative learning process. Adaptive management also recognizes the importance of natural variability in contributing to ecological resilience and productivity. It is not a ‘trial and error’ process, but rather emphasizes learning while doing. Adaptive management does not represent an end in itself, but rather a means to more effective decisions and enhanced benefits. Its true measure is in how well it helps meet environmental, social, and economic goals, increases scientific knowledge, and reduces

Social Security cost-of-living adjustments and the Consumer Price Index.

Science.gov (United States)

Burdick, Clark; Fisher, Lynn

2007-01-01

base-period's living standard.... Unfortunately, because the cost of achieving a living standard cannot be observed directly, in operational terms, a COLI can only be approximated. Although the CPI cannot be said to equal a cost-of-living index, the concept of the COLI provides the CPI's measurement objective and the standard by which we define any bias in the CPI. While all versions of the CPI only approximate the actual changes in the cost of living, the CPI-E has several additional technical limitations. First, the CPI-E may better account for the goods and services typically purchased by the elderly, but the expenditure weights for the elderly are the only difference between the CPI-E and CPI-W. These weights are based on a much smaller sample than the other two indices, making it less precise. Second, the CPI-E does not account for differences in retail outlets frequented by the aged population or the prices they pay. Finally, the purchasing population measured in the CPI-E is not necessarily identical to the Social Security beneficiary population, where more than one-fifth of OASDI beneficiaries are under age 62. Likewise, over one-fifth of persons aged 62 or older are not beneficiaries, but they are included in the CPI-E population. Finally, changes in the index used to calculate COLAs directly affect the amount of benefits paid, and as a result, projected solvency of the Social Security program. A switch to the CPI-E for the December 2006 COLA (received in January 2007) would have resulted in an average monthly benefit $0.90 higher than that received. If the December 2006 COLA had been adjusted by the Chained CPI-U instead, the average monthly benefit would have been $4.70 less than with current indexing. Any changes to the COLA that would cause faster growth in individual benefits would make the projected date of insolvency sooner, while slower growth would delay insolvency. Hobijn and Lagakos (2003) estimated that switching to the CPI-E for COLAs would move

Individual decision making, group decision making and deliberation

Directory of Open Access Journals (Sweden)

Radovanović Bojana

2012-01-01

Full Text Available Each of us makes a number of decisions, from the less important to those with far-reaching consequences. As members of different groups, we are also actors of group decision making. In order to make a rational decision, a choice-making procedure must satisfy a number of assumptions (conditions of rationality. In addition, when it comes to group decisions, those procedures should also be “fair.” However, it is not possible to define a procedure of choice-making that would transform individual orders of alternatives based on preferences of perfectly rational individuals into a single social order and still meet conditions of rationality and ethics. The theory of deliberative democracy appeared in response to the impossibility of Social Choice theory. The basic assumption of deliberative democracy is that individuals adjust their preferences taking into account interests of the community. They are open for discussion with other group members and are willing to change their attitudes in order to achieve common interests. Ideally, group members come to an agreement during public discussion (deliberation. Still, this concept cannot completely over­come all the difficulties posed by the theory of social choice. Specifically, there is no solution for strategic and manipulative behavior of individuals. Also, the concept of deliberative democracy faces certain problems particular to this approach, such as, to name but a few, problems with the establishment of equality of participants in the debate and their motivation, as well as problems with the organization of public hearings. [Projekat Ministarstva nauke Republike Srbije, br. 47009: Evropske integracije i društveno-ekonomske promene privrede Srbije na putu ka EU i br. 179015: Izazovi i perspektive strukturnih promena u Srbiji: Strateški pravci ekonomskog razvoja i usklađivanje sa zahtevima EU

On the Use of Student Data in Efficiency Analysis--Technical Efficiency in Swedish Upper Secondary School

Science.gov (United States)

Waldo, Staffan

2007-01-01

While individual data form the base for much empirical analysis in education, this is not the case for analysis of technical efficiency. In this paper, efficiency is estimated using individual data which is then aggregated to larger groups of students. Using an individual approach to technical efficiency makes it possible to carry out studies on a…

Content Analysis as a Best Practice in Technical Communication Research

Science.gov (United States)

Thayer, Alexander; Evans, Mary; McBride, Alicia; Queen, Matt; Spyridakis, Jan

2007-01-01

Content analysis is a powerful empirical method for analyzing text, a method that technical communicators can use on the job and in their research. Content analysis can expose hidden connections among concepts, reveal relationships among ideas that initially seem unconnected, and inform the decision-making processes associated with many technical…

Aerobic composting of distilled grain waste eluted from a Chinese spirit-making process: The effects of initial pH adjustment.

Science.gov (United States)

Wang, Shi-Peng; Zhong, Xiao-Zhong; Wang, Ting-Ting; Sun, Zhao-Yong; Tang, Yue-Qin; Kida, Kenji

2017-12-01

Aerobic composting of distilled grain waste (DGW) at different initial pH values adjusted by CaO addition was investigated. Three pH-adjusted treatments with initial pH values of 4 (R1), 5 (R2) and 6 (R3) and a control treatment (R0) with a pH value of 3.5 were conducted simultaneously. The results showed that R0 had an unsuccessful start-up of composting. However, the pH-adjusted treatments produced remarkable results, with a relatively high initial pH being beneficial for the start-up. Within 65days of composting, the degradation of volatile solids (VS) and the physicochemical properties of R2 and R3 displayed similar tendencies, and both produced a mature end-product, while R1 exhibited a lower VS degradation rate, and some of its physicochemical properties indicated the end-product was immature. Quantitative PCR analysis of ammonia oxidizers indicated that the occurrence of nitrification during the composting of DGW could be attributed to the activity of ammonia-oxidizing bacteria. Copyright © 2017 Elsevier Ltd. All rights reserved.

Metric-adjusted skew information

DEFF Research Database (Denmark)

Liang, Cai; Hansen, Frank

2010-01-01

on a bipartite system and proved superadditivity of the Wigner-Yanase-Dyson skew informations for such states. We extend this result to the general metric-adjusted skew information. We finally show that a recently introduced extension to parameter values 1 ...We give a truly elementary proof of the convexity of metric-adjusted skew information following an idea of Effros. We extend earlier results of weak forms of superadditivity to general metric-adjusted skew information. Recently, Luo and Zhang introduced the notion of semi-quantum states...... of (unbounded) metric-adjusted skew information....

ADJUSTABLE CHIP HOLDER

DEFF Research Database (Denmark)

2009-01-01

An adjustable microchip holder for holding a microchip is provided having a plurality of displaceable interconnection pads for connecting the connection holes of a microchip with one or more external devices or equipment. The adjustable microchip holder can fit different sizes of microchips...

Violations of war: testing the meaning-making model among Vietnam veterans.

Science.gov (United States)

Steger, Michael F; Owens, Gina P; Park, Crystal L

2015-01-01

Posttrauma adjustment theories postulate that intense stressors violate people's beliefs about the world and perceived ability to achieve valued goals. Failure to make meaning from traumatic events exacerbates negative adjustment (e.g., PTSD), whereas success facilitates positive adjustment (e.g., stress-related growth). The current study aimed to test this model of direct and indirect effects among a sample of veterans. Vietnam veterans (N = 130) completed assessment measures in an online survey format. Participants were largely male (91%) and Caucasian (93%) with a mean age of 61 years. Results supported basic model tenets, linking military stress severity to violations of beliefs and goals. In the final model, only goal violations carried indirect effects of severity on PTSD symptoms. Presence of and search for meaning carried a portion of the indirect effects between goal violations and both PTSD and stress-related growth. Findings suggest that traumatic stress may disrupt people's goals and meaning-making may center on these disruptions. © 2014 Wiley Periodicals, Inc.

Development and Testing of a Decision Making Based Method to Adjust Automatically the Harrowing Intensity

Directory of Open Access Journals (Sweden)

Roland Gerhards

2013-05-01

Full Text Available Harrowing is often used to reduce weed competition, generally using a constant intensity across a whole field. The efficacy of weed harrowing in wheat and barley can be optimized, if site-specific conditions of soil, weed infestation and crop growth stage are taken into account. This study aimed to develop and test an algorithm to automatically adjust the harrowing intensity by varying the tine angle and number of passes. The field variability of crop leaf cover, weed density and soil density was acquired with geo-referenced sensors to investigate the harrowing selectivity and crop recovery. Crop leaf cover and weed density were assessed using bispectral cameras through differential images analysis. The draught force of the soil opposite to the direction of travel was measured with electronic load cell sensor connected to a rigid tine mounted in front of the harrow. Optimal harrowing intensity levels were derived in previously implemented experiments, based on the weed control efficacy and yield gain. The assessments of crop leaf cover, weed density and soil density were combined via rules with the aforementioned optimal intensities, in a linguistic fuzzy inference system (LFIS. The system was evaluated in two field experiments that compared constant intensities with variable intensities inferred by the system. A higher weed density reduction could be achieved when the harrowing intensity was not kept constant along the cultivated plot. Varying the intensity tended to reduce the crop leaf cover, though slightly improving crop yield. A real-time intensity adjustment with this system is achievable, if the cameras are attached in the front and at the rear or sides of the harrow.

Development and Testing of a Decision Making Based Method to Adjust Automatically the Harrowing Intensity

Science.gov (United States)

Rueda-Ayala, Victor; Weis, Martin; Keller, Martina; Andújar, Dionisio; Gerhards, Roland

2013-01-01

Harrowing is often used to reduce weed competition, generally using a constant intensity across a whole field. The efficacy of weed harrowing in wheat and barley can be optimized, if site-specific conditions of soil, weed infestation and crop growth stage are taken into account. This study aimed to develop and test an algorithm to automatically adjust the harrowing intensity by varying the tine angle and number of passes. The field variability of crop leaf cover, weed density and soil density was acquired with geo-referenced sensors to investigate the harrowing selectivity and crop recovery. Crop leaf cover and weed density were assessed using bispectral cameras through differential images analysis. The draught force of the soil opposite to the direction of travel was measured with electronic load cell sensor connected to a rigid tine mounted in front of the harrow. Optimal harrowing intensity levels were derived in previously implemented experiments, based on the weed control efficacy and yield gain. The assessments of crop leaf cover, weed density and soil density were combined via rules with the aforementioned optimal intensities, in a linguistic fuzzy inference system (LFIS). The system was evaluated in two field experiments that compared constant intensities with variable intensities inferred by the system. A higher weed density reduction could be achieved when the harrowing intensity was not kept constant along the cultivated plot. Varying the intensity tended to reduce the crop leaf cover, though slightly improving crop yield. A real-time intensity adjustment with this system is achievable, if the cameras are attached in the front and at the rear or sides of the harrow. PMID:23669712

Federal Technical Information and U.S. Competitiveness: Needs, Opportunities, and Issues.

Science.gov (United States)

Hill, Christopher T.

1989-01-01

Discusses the importance of competitiveness to the American economy and examines three areas where federal information policies affect American competitiveness: providing the private sector with technical information; making federal information resources available to industry; and restricting foreign access to those resources. For each area,…

Bellona and hydrogen - the role of mediation in technical change

International Nuclear Information System (INIS)

Kristiansen, Beate

2001-01-01

The energy production and consumption is a major contributor to our environmental problems. The energy carrier hydrogen can be a part of the solution. In the thesis the Bellona Foundation's role in the process of technical change towards utilisation of hydrogen in Norway is investigated. Its role is analysed through the concept of mediation, which is based on seeing technical change as a social process. Mediators connect, or build bridges between, different actors, as well as between different types of knowledge. They establish new kinds of links and create new arenas of interaction for previously separated units. In addition, or through their work, they translate knowledge from one context or domain to another. They are also processing, interpreting and combining knowledge in new ways. Mediators bring together people with different competencies, and orchestrate their efforts often on a consensus basis. Bellona combines the different kinds of mediations, to influence the process of technical change at various levels and steps. They mediate mainly within the industry and between the industrial- and governmental domain. To some degree they also mediate between the experts and the public. But the direct contact with the public seems to be more or less absent in their hydrogen work. It seems like Bellona's mediator role fills an open space in the realm of technology policy making. Environmental oriented NGOs will perform or combine various mediating roles differently. To be able to make socially appropriate and sustainable technical change, probably other actors than the established traditional ones should be more involved. The possibilities for public participation should be strengthened, as well as the possibilities for mediation. (Author)

Making Decisions about Workforce Development in Registered Training Organisations

Science.gov (United States)

Hawke, Geof

2008-01-01

The purpose of this research activity is to understand further how large and small registered training organisations (RTOs) make decisions about the allocation of resources for developing their workforces. Six registered training organisations--four technical and further education (TAFE) institutes and two private providers--were selected for…

20 CFR 416.962 - Medical-vocational profiles showing an inability to make an adjustment to other work.

Science.gov (United States)

2010-04-01

... adjustment to other work. (a) If you have done only arduous unskilled physical labor. If you have no more... you have a severe, medically determinable impairment(s) (see §§ 416.920(c), 416.921, and 416.923), are... consider the rules in appendix 2 to subpart P of part 404 of this chapter. [68 FR 51166, Aug. 26, 2003] ...

Descriptive analysis of context evaluation instrument for technical oral presentation skills evaluation: A case study in English technical communication course

Science.gov (United States)

Mohamed, Abdullah-Adnan; Asmawi, Adelina; Hamid, Mohd Rashid Ab; Mustafa, Zainol bin

2015-02-01

This paper reports a pilot study of Context Evaluation using a self-developed questionnaire distributed among engineering undergraduates at a university under study. The study aims to validate the self-developed questionnaires used in the Context evaluation, a component in the CIPP Model. The Context evaluation assesses background information for needs, assets, problems and opportunities relevant to beneficiaries of the study in a defined environment. Through the questionnaire, background information for the assessment of needs, assets and problems related to the engineering undergraduates' perceptions on the teaching and learning of technical oral presentation skills was collected and analysed. The questionnaire was developed using 5-points Likert scale to measure the constructs under study. They were distributed to 100 respondents with 79 returned. The respondents consisted of engineering undergraduates studied at various faculties at one technical university in Malaysia. The descriptive analysis of data for each item which makes up the construct for Context evaluation is found to be high. This implied that engineering undergraduates showed high interest in teaching and learning of technical oral presentation skills, thus their needs are met. Also, they agreed that assets and facilities are conducive to their learning. In conclusion, the context evaluation involving needs and assets factors are both considerably important; their needs are met and the assets and facilities do support their technical oral presentation skills learning experience.

The Virtual Orchestra: Technical and Creative Issues

Science.gov (United States)

BIANCHI, F. W.; CAMPBELL, R. H.

2000-04-01

The interactive multi-channel computer music system known as the Virtual Orchestra has been used several times in professional opera and theater as an alternative to a live pit orchestra. The technical issues associated with this emerging technology, and the logistical problems of implementing it are discussed. In addition, this paper describes the equally important issues regarding the creative impact this will have on the industry. In particular, this paper explores the role of the musician/technologist and suggests that many of the fundamental premises of opera production will change as the industry begins to retool. This would include the way opera is rehearsed and performed, how it is created and disseminated, and how it will adjust to changing demographics.

Neural basis of quasi-rational decision making.

Science.gov (United States)

Lee, Daeyeol

2006-04-01

Standard economic theories conceive homo economicus as a rational decision maker capable of maximizing utility. In reality, however, people tend to approximate optimal decision-making strategies through a collection of heuristic routines. Some of these routines are driven by emotional processes, and others are adjusted iteratively through experience. In addition, routines specialized for social decision making, such as inference about the mental states of other decision makers, might share their origins and neural mechanisms with the ability to simulate or imagine outcomes expected from alternative actions that an individual can take. A recent surge of collaborations across economics, psychology and neuroscience has provided new insights into how such multiple elements of decision making interact in the brain.

Sensitivity of TRIM projections to management, harvest, yield, and stocking adjustment assumptions.

Science.gov (United States)

Susan J. Alexander

1991-01-01

The Timber Resource Inventory Model (TRIM) was used to make several projections of forest industry timber supply for the Douglas-fir region. The sensitivity of these projections to assumptions about management and yields is discussed. A base run is compared to runs in which yields were altered, stocking adjustment was eliminated, harvest assumptions were changed, and...

Customisation of an instrument to assess anaesthesiologists' non-technical skills.

Science.gov (United States)

Jepsen, Rikke M H G; Spanager, Lene; Lyk-Jensen, Helle T; Dieckmann, Peter; Østergaard, Doris

2015-02-22

The objectives of the study were to identify Danish anaesthesiologists' non-technical skills and to customise the Scottish-developed Anaesthetists' Non-Technical Skills instrument for Danish anaesthesiologists. Six semi-structured group interviews were conducted with 31 operating room team members: anaes-thesiologists, nurse anaesthetists, surgeons, and scrub nurses. Interviews were transcribed verbatim and analysed using directed content analysis. Anaesthesiologists' non-technical skills were identified, coded, and sorted using the original instrument as a basis. The resulting prototype instrument was discussed with anaesthesiologists from 17 centres to ensure face validity. Interviews lasted 46-67 minutes. Identified examples of anaesthesiologists' good or poor non-technical skills fit the four categories in the original instrument: situation awareness; decision making; team working; and task management. Anaesthesiologists' leadership role in the operating room was emphasised: the original 'Task Management' category was named 'Leadership'. One new element, 'Demonstrating self-awareness' was added under the category 'Situation Awareness'. Compared with the original instrument, half of the behavioural markers were new, which reflected that being aware of and communicating one's own abilities to the team; working systematically; and speaking up to avoid adverse events were important skills. The Anaesthetists' Non-Technical Skills instrument was customised to a Danish setting using the identified non-technical skills for anaesthesiologists and the original instrument as basis. The customised instrument comprises four categories and 16 underpinning elements supported by multiple behavioural markers. Identifying non-technical skills through semi-structured group interviews and analysing them using direct content analysis proved a useful method for customising an assessment instrument to another setting.

Repatriation Adjustment: Literature Review

Directory of Open Access Journals (Sweden)

Gamze Arman

2009-12-01

Full Text Available Expatriation is a widely studied area of research in work and organizational psychology. After expatriates accomplish their missions in host countries, they return to their countries and this process is called repatriation. Adjustment constitutes a crucial part in repatriation research. In the present literature review, research about repatriation adjustment was reviewed with the aim of defining the whole picture in this phenomenon. Present research was classified on the basis of a theoretical model of repatriation adjustment. Basic frame consisted of antecedents, adjustment, outcomes as main variables and personal characteristics/coping strategies and organizational strategies as moderating variables.

Technical Efficiency and Organ Transplant Performance: A Mixed-Method Approach

Science.gov (United States)

de-Pablos-Heredero, Carmen; Fernández-Renedo, Carlos; Medina-Merodio, Jose-Amelio

2015-01-01

Mixed methods research is interesting to understand complex processes. Organ transplants are complex processes in need of improved final performance in times of budgetary restrictions. As the main objective a mixed method approach is used in this article to quantify the technical efficiency and the excellence achieved in organ transplant systems and to prove the influence of organizational structures and internal processes in the observed technical efficiency. The results show that it is possible to implement mechanisms for the measurement of the different components by making use of quantitative and qualitative methodologies. The analysis show a positive relationship between the levels related to the Baldrige indicators and the observed technical efficiency in the donation and transplant units of the 11 analyzed hospitals. Therefore it is possible to conclude that high levels in the Baldrige indexes are a necessary condition to reach an increased level of the service offered. PMID:25950653

TWRS safety and technical integration risk management plan

International Nuclear Information System (INIS)

Fordham, R.A.

1996-01-01

The objectives of the Tank Waste Remediation System (TWRS) Safety and Technical Integration (STI) programmatic risk management program are to assess, analyze, and handle risks associated with TWRS STI responsibilities and to communicate information about the actions being taken and the results to enable decision making. The objective of this TWRS STI Risk Management Plan is to communicate a consistent approach to risk management that will be used by the organization

Mechanisms Underlying Decision-Making as Revealed by Deep-Brain Stimulation in Patients with Parkinson's Disease.

Science.gov (United States)

Herz, Damian M; Little, Simon; Pedrosa, David J; Tinkhauser, Gerd; Cheeran, Binith; Foltynie, Tom; Bogacz, Rafal; Brown, Peter

2018-04-23

To optimally balance opposing demands of speed and accuracy during decision-making, we must flexibly adapt how much evidence we require before making a choice. Such adjustments in decision thresholds have been linked to the subthalamic nucleus (STN), and therapeutic STN deep-brain stimulation (DBS) has been shown to interfere with this function. Here, we performed continuous as well as closed-loop DBS of the STN while Parkinson's disease patients performed a perceptual decision-making task. Closed-loop STN DBS allowed temporally patterned STN stimulation and simultaneous recordings of STN activity. This revealed that DBS only affected patients' ability to adjust decision thresholds if applied in a specific temporally confined time window during deliberation. Only stimulation in that window diminished the normal slowing of response times that occurred on difficult trials when DBS was turned off. Furthermore, DBS eliminated a relative, time-specific increase in STN beta oscillations and compromised its functional relationship with trial-by-trial adjustments in decision thresholds. Together, these results provide causal evidence that the STN is involved in adjusting decision thresholds in distinct, time-limited processing windows during deliberation. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Technical records as material evidence in criminal proceedings

Directory of Open Access Journals (Sweden)

Fitim Shishani

2017-03-01

Full Text Available Nowadays, with the aid of technical records - recordings (audio, visual or combined audiovisual events and occurrences can be registered in the outside world in detail. The recording enables the creator or anyone who has it in disposal that at any moment of its reproduction, it can be found in detail how the recorded event has happened or how an occurrence seemed at the time of the recording. Among the current formats of technical records are included: photography, filming, magnetic, magnetoscope, and videophone recording etc. (Sahiti & Murati 2016, 295. The possibility provided by the rapid technical development is also of interest to criminal procedure because technical records containing any fact that may be proved in criminal proceedings may serve as a source of knowledge about facts. In other words, they may serve as evidence to establish facts in criminal proceedings. Given the extensive options that technical fact recordings provide, entities that use the aid of various devices from this fi eld, as well as the different purposes of the author of the recording which have led to the case of making the recording, there is a reasonable question of the permission on their use as evidence in criminal proceedings. In Kosovo, the situation is clear in terms of recordings made in the criminal procedure, as Kosovo CCP 1 provides the possibility of photographing, filming, sketching, etc., of the crime scene, audio visual recording etc. examination of persons (defendant, witness, expert or recordings of any action on judicial review.

Technical Performance and Clinical Effectiveness of Drop Type With Adjustable Concentrator-Cell Free and Concentrated Ascites Reinfusion Therapy.

Science.gov (United States)

Yamada, Yosuke; Harada, Makoto; Yamaguchi, Akinori; Kobayashi, Yasuko; Chino, Takashi; Minowa, Takashi; Kosuge, Takashi; Tsukada, Wataru; Hashimoto, Koji; Kamijo, Yuji

2017-12-01

Cell-free and concentrated ascites reinfusion therapy (CART) is a very useful treatment method for refractory ascites but is difficult for many hospitals to employ due to its need for specialized equipment. We have therefore developed drop-type with adjustable concentrator CART (DC-CART) that uses a drop-type filtration mechanism and requires only a simple pump and pressure monitor for its concentration process. Easy adjustment of ascites concentration is possible through a recirculation loop, and filter membrane washing is aided by DC-CART's external pressure-type filtration to enable the processing of any quality or quantity of ascites. Moreover, the absence of a roller pump before filtration avoids inflammatory substance release from compressed cells. A total of 268 sessions of DC-CART using ascites from 98 patients were performed with good clinical results at our hospitals between January 2012 and June 2016. This report presents the detailed methods of DC-CART and summarizes its clinical effectiveness using patient ascites and blood data obtained from 59 sessions between March 2015 and February 2016. This novel technique successfully processed refractory ascites in numerous diseases with no serious adverse events. DC-CART could concentrate large amounts of ascites (from median weight: 4900 g [max: 20 200 g] to median weight: 695 g; median concentration ratio: 7.4), and a high amount of protein (median weight: 73 g [max: 294 g]) could be reinfused. Serum albumin levels were significantly increased (P = 0.010) and kidney function and systemic hemodynamics were well maintained in treated subjects. Additional concentration of ascites and adjustment of ascites volume were easily performed by recirculation (from median weight: 615 g to median weight: 360 g; median concentration ratio: 1.5). Time was needed during DC-CART for filter membrane cleaning, especially for viscous ascites. Overall, DC-CART represents a safe and useful treatment method for various forms

Mode division multiplexing technology for single-fiber optical trapping axial-position adjustment.

Science.gov (United States)

Liu, Zhihai; Wang, Lei; Liang, Peibo; Zhang, Yu; Yang, Jun; Yuan, Libo

2013-07-15

We demonstrate trapped yeast cell axial-position adjustment without moving the optical fiber in a single-fiber optical trapping system. The dynamic axial-position adjustment is realized by controlling the power ratio of the fundamental mode beam (LP01) and the low-order mode beam (LP11) generated in a normal single-core fiber. In order to separate the trapping positions produced by the two mode beams, we fabricate a special fiber tapered tip with a selective two-step method. A yeast cell of 6 μm diameter is moved along the optical axis direction for a distance of ~3 μm. To the best of our knowledge, this is the first demonstration of the trapping position adjustment without moving the fiber for single-fiber optical tweezers. The excitation and utilization of multimode beams in a single fiber constitutes a new development for single-fiber optical trapping and makes possible more practical applications in biomedical research fields.

Technical nuclear safety in France. Control by the governmental authority

International Nuclear Information System (INIS)

1991-12-01

In publishing this latest edition, we have endeavoured to provide the reader with the information necessary to obtain a full understanding of the regulatory system applied to ensure technical nuclear safety in France. As the reader will discover in the following pages, technical nuclear safety is a matter which must be settled in advance of the actual operation of civil nuclear installations; the primary requirement is to mobilize those involved to anticipate and prevent. The fundamental options on which the French system is based, the relationship between the operator and the safety authority must be clearly stated: independence of judgement and decision, complementarity of responsibilities. It is for the governmental authorities to determine the technical nuclear safety objectives, which are becoming more and more consistent if not unified throughout the world. It is for the operator to propose technical provisions in order to achieve these objectives. It is for the governmental authorities to verify, by technical safety analyses, the adequacy of the provisions in terms of the defined objectives. It is for the operator to properly implement these approved provisions. And, finally, it is for the governmental authorities to verify, by sampling, the quality of their implementation and to make from them the necessary regulatory inferences. This sequence of events requires permanent frank in-depth dialogue. The effectiveness of the regulatory action must therefore reside not in close technical restraint but in the interactions between responsible partners

Technical nuclear safety in France. Control by the governmental authority

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-12-15

In publishing this latest edition, we have endeavoured to provide the reader with the information necessary to obtain a full understanding of the regulatory system applied to ensure technical nuclear safety in France. As the reader will discover in the following pages, technical nuclear safety is a matter which must be settled in advance of the actual operation of civil nuclear installations; the primary requirement is to mobilize those involved to anticipate and prevent. The fundamental options on which the French system is based, the relationship between the operator and the safety authority must be clearly stated: independence of judgement and decision, complementarity of responsibilities. It is for the governmental authorities to determine the technical nuclear safety objectives, which are becoming more and more consistent if not unified throughout the world. It is for the operator to propose technical provisions in order to achieve these objectives. It is for the governmental authorities to verify, by technical safety analyses, the adequacy of the provisions in terms of the defined objectives. It is for the operator to properly implement these approved provisions. And, finally, it is for the governmental authorities to verify, by sampling, the quality of their implementation and to make from them the necessary regulatory inferences. This sequence of events requires permanent frank in-depth dialogue. The effectiveness of the regulatory action must therefore reside not in close technical restraint but in the interactions between responsible partners.

Sustainable network of independent technical expertise for radioactive waste disposal (SITEX)

Energy Technology Data Exchange (ETDEWEB)

Serres, Christophe; Rocher, Muriel [Institut de Radioprotection et de Surete Nucleaire (IRSN), Fontenay-aux-Roses (France); Bernier, Frederic [FANC, Brussels (Belgium); Havlova, Vaclava [UJV Rez, a.s., Rez (Czech Republic); Mrskova, Adela [DECOM A.S., Trnava (Slovakia); Dubreuil, Gilles Heriard [MUTADIS, Paris (France)

2013-07-01

SITEX is a 24 months FP7 Euratom project (from January 2012 to December 2013) led by IRSN and bringing together organisations representing technical safety organisations and nuclear safety authorities performing technical and scientific assessment of geological disposals for radioactive waste in the framework of their respective national regulatory review process of the safety case. Civil society outreach specialists of interaction with civil society are also involved in the project. SITEX aims at establishing the conditions required for developing sustainable interactions among experts from various horizons (nuclear safety authorities, technical safety organisations, civil society organisations..) capable of developing and coordinating joint and harmonized activities in relation with the safety assessment of the safety case. Among foreseen activities, partnership with the civil society experts is considered as a key function of the future network in order to contribute in enhancing trust in the decision making process. The SITEX program of work is split into a set of six workpackages that address technical and organizational issues allowing in fine to propose a structure of the activities and operating modes of the future network. These issues relate on the one hand to the study of the potential for sharing and developing technical expertise practices independently from the expertise developed by waste management organisations, on the other hand on the ability to implement coordinated R and D programs run by technical safety organisations in order to develop the scientific knowledge necessary to perform technical assessments. (orig.)

Technical Support Essentials Advice to Succeed in Technical Support

CERN Document Server

Sanchez, Andrew

2010-01-01

Technical Support Essentials is a book about the many facets of technical support. It attempts to provide a wide array of topics to serve as points of improvement, discussion, or simply topics that you might want to learn. The topics range from good work habits to the way technical supportgroups establish their own style of work. This book applies theories, models, and concepts synthesized from existing research in other fields-such as management, economics, leadership, and psychology-and connects them to technical support. The goal is to build on the work of others and allow their success to

Decision making technical support study for the US Army's Chemical Stockpile Disposal Program

Energy Technology Data Exchange (ETDEWEB)

Feldman, D.L.; Dobson, J.E.

1990-08-01

This report examines the adequacy of current command and control systems designed to make timely decisions that would enable sufficient warning and protective response to an accident at the Edgewood area of Aberdeen Proving Ground (APG), Maryland, and at Pine Bluff Arsenal (PBA), Arkansas. Institutional procedures designed to facilitate rapid accident assessment, characterization, warning, notification, and response after the onset of an emergency and computer-assisted decision-making aids designed to provide salient information to on- and-off-post emergency responders are examined. The character of emergency decision making at APG and PBA, as well as potential needs for improvements to decision-making practices, procedures, and automated decision-support systems (ADSSs), are described and recommendations are offered to guide equipment acquisition and improve on- and off-post command and control relationships. We recommend that (1) a continued effort be made to integrate on- and off-post command control, and decision-making procedures to permit rapid decision making; (2) the pathways for alert and notification among on- and off-post officials be improved and that responsibilities and chain of command among off-post agencies be clarified; (3) greater attention be given to organizational and social context factors that affect the adequacy of response and the likelihood that decision-making systems will work as intended; and (4) faster improvements be made to on-post ADSSs being developed at APG and PBA, which hold considerable promise for depicting vast amounts of information. Phased development and procurement of computer-assisted decision-making tools should be undertaken to balance immediate needs against available resources and to ensure flexibility, equity among sites, and compatibility among on- and off-post systems. 112 refs., 6 tabs.

Relationship between intraoperative non-technical performance and technical events in bariatric surgery.

Science.gov (United States)

Fecso, A B; Kuzulugil, S S; Babaoglu, C; Bener, A B; Grantcharov, T P

2018-03-30

The operating theatre is a unique environment with complex team interactions, where technical and non-technical performance affect patient outcomes. The correlation between technical and non-technical performance, however, remains underinvestigated. The purpose of this study was to explore these interactions in the operating theatre. A prospective single-centre observational study was conducted at a tertiary academic medical centre. One surgeon and three fellows participated as main operators. All patients who underwent a laparoscopic Roux-en-Y gastric bypass and had the procedures captured using the Operating Room Black Box ® platform were included. Technical assessment was performed using the Objective Structured Assessment of Technical Skills and Generic Error Rating Tool instruments. For non-technical assessment, the Non-Technical Skills for Surgeons (NOTSS) and Scrub Practitioners' List of Intraoperative Non-Technical Skills (SPLINTS) tools were used. Spearman rank-order correlation and N-gram statistics were conducted. Fifty-six patients were included in the study and 90 procedural steps (gastrojejunostomy and jejunojejunostomy) were analysed. There was a moderate to strong correlation between technical adverse events (r s  = 0·417-0·687), rectifications (r s  = 0·380-0·768) and non-technical performance of the surgical and nursing teams (NOTSS and SPLINTS). N-gram statistics showed that after technical errors, events and prior rectifications, the staff surgeon and the scrub nurse exhibited the most positive non-technical behaviours, irrespective of operator (staff surgeon or fellow). This study demonstrated that technical and non-technical performances are related, on both an individual and a team level. Valuable data can be obtained around intraoperative errors, events and rectifications. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

Climate policy and trade policy - The French proposal for a EU-wide border tax adjustment for CO2 emissions

International Nuclear Information System (INIS)

Damian, M.; Abbasn, M.

2007-01-01

The paper examines the French proposal to establish a EU-wide border tax adjustment for CO 2 emissions. The tax seeks to offset competitive distortions toward European industries which incur the cost of the Kyoto Protocol and to prompt European competitors to join the Kyoto Protocol. So far, the debate has chiefly focused on the compatibility of such a border tax adjustment with the rules of the multilateral trading system of the World Trade Organization. Without auguring how a dispute would eventually be settled within the WTO frame-work, the paper argues that the implementation of a border tax adjustment is not as much an issue of technical feasibility or compatibility with the multilateral trading system, as a matter of collective determination to drastically reduce greenhouse gas emissions. The French proposal is a yardstick for climate policy after the expiration of the Kyoto Protocol in 2012. The paper looks in more details into the core directions of pending negotiations. (authors)

Application of owner technical management in hydraulic machinery and electrical equipment investment target control

International Nuclear Information System (INIS)

Luo, H

2012-01-01

Using technical means in investment target control is an effective method to improve investment benefit of a construction project. Take the practice of construction and management in hydropower station as an example, the investment and management need of the owner is put forward through the investment target decision-making process of electromechanical equipment. Owner technical management in the specific application measures and effects of investment target control was discussed in the paper, and the revelation in investment target control application of owner technical management was also summarized. The paper is aimed to provide a useful reference for the investment target control work in the construction of electromechanical equipment.

Imagining Technicities

DEFF Research Database (Denmark)

Liboriussen, Bjarke; Plesner, Ursula

2011-01-01

to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role......, this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references...... in cooperation and development of ICTs seems to pass unnoticed. However, since they are aligned into ICTs, technicities impact innovation....

Beautiful Beads: A Lesson in Making Beads with Friendly Clay. AMACO[R] Lesson.

Science.gov (United States)

Gamble, Harriet; Gamble, David

This lesson resource includes a brief summary of the history of bead making and historic fascination with beads as adornment. A focus on design elements, color theory, craftsmanship, and technical skill in bead making is encouraged. The plan includes lesson goals and objectives; background preparation; a glossary of terms; a list of supplies; and…

Monday 9 January 2006: RESTRICTED ACCESS to the Technical Network

CERN Multimedia

CNIC Users Exchange and IT/CS

2005-01-01

As of Monday 9 January 2006, Ethernet access from the general CERN network to the Technical Network (TN) will be restricted in order to improve security on the TN. As a result, all Ethernet communication between the General Purpose Network (GPN) and the TN will be filtered. Only communication lines to the general IT services such as DNS, TP, NICE, DFS, AFS, Antivirus, Linux installation servers, License servers, OracleDB, TSM backup servers and dedicated AB and TS servers on the GPN will remain open. Please make sure that all your devices are registered properly in the network database (LANDB): http://network.cern.ch/. You are encouraged to make proper use of the 'Tag' and 'Description' fields in order to identify your system later on. If your system depends on special services on the GPN or is split between the GPN and the TN, e.g. consists of devices (PCs, PLCs, VME crates, webcams, etc.) connected to both the TN and the GPN, please contact the Technical-Network.Administrator@cern.ch . They will include...

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Switzerland (please sp...

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Swi...

[Role and integration of technical prevention figures in the management system].

Science.gov (United States)

Bartolucci, G B; Santantonio, P; Casciani, M; Dagazzini, I

2010-01-01

The multifarious issues of health and safety at work require multi-disciplinary skills, both in the risk assessment and in the subsequent definition and management of preventive measures, and this requires a renewed operational protocol that supports integration and co-operation between the technical prevention figures. Thus, between occupational physicians and technical advisers there should be a concrete and fruitful interaction, which should not be episodic or occasional, but a modus operandi systematic and constant. In this contribution is discussed as the technical prevention figures should be included in the Health and Safety Management System and should make a specific contribution in defining corporate policies on prevention. In particular it is outlined the role that the occupational physician may play in the development of prevention and health promotion activities within the strategies of corporate social responsibility.

Dependability of technical items: Problems of standardization

Science.gov (United States)

Fedotova, G. A.; Voropai, N. I.; Kovalev, G. F.

2016-12-01

This paper is concerned with problems blown up in the development of a new version of the Interstate Standard GOST 27.002 "Industrial product dependability. Terms and definitions". This Standard covers a wide range of technical items and is used in numerous regulations, specifications, standard and technical documentation. A currently available State Standard GOST 27.002-89 was introduced in 1990. Its development involved a participation of scientists and experts from different technical areas, its draft was debated in different audiences and constantly refined, so it was a high quality document. However, after 25 years of its application it's become necessary to develop a new version of the Standard that would reflect the current understanding of industrial dependability, accounting for the changes taking place in Russia in the production, management and development of various technical systems and facilities. The development of a new version of the Standard makes it possible to generalize on a terminological level the knowledge and experience in the area of reliability of technical items, accumulated over a quarter of the century in different industries and reliability research schools, to account for domestic and foreign experience of standardization. Working on the new version of the Standard, we have faced a number of issues and problems on harmonization with the International Standard IEC 60500-192, caused first of all by different approaches to the use of terms and differences in the mentalities of experts from different countries. The paper focuses on the problems related to the chapter "Maintenance, restoration and repair", which caused difficulties for the developers to harmonize term definitions both with experts and the International Standard, which is mainly related to differences between the Russian concept and practice of maintenance and repair and foreign ones.

Canada's nuclear achievement. Technical and economic perspectives

International Nuclear Information System (INIS)

Rummery, T.E.; Macpherson, J.A.

1995-01-01

Canada's leading role and eminent accomplishments in nuclear development now span more than half a century. They encompass aspects as diverse as the design and sale of nuclear power reactors and research reactor technology, to the establishment of a corps of scientists, engineers and technologists with the expertise to address a wide scope of important nuclear science issues. The success of a country of modest technical and financial resources, like Canada, in the highly technical and very competitive nuclear field is surprising to many Canadians, and does not fit the usual image we have of ourselves as 'drawers of water and hewers of wood'. For this reason alone, Canada's nuclear achievement makes an interesting and timely story. To address the many facets of Canada's nuclear activities over the past 50 years would obviously require space far beyond that available in this paper. We have therefore limited this review to highlights we judge to be the most pertinent and interesting from an historical, technical and economic perspective. We also indicate briefly our view of the future of nuclear power in the overall context of energy needs in a world that is becoming more industrial and increasingly environmentally conscious. (author) 22 refs., 7 figs

IAS15 inflation adjustments and EVA: empirical evidence from a highly variable inflation regime

Directory of Open Access Journals (Sweden)

Pierre Erasmus

2011-08-01

Full Text Available Inflation can have a pronounced effect on the financial performance of a firm. This study makes inflation adjustments to a firm’s cost of sales, depreciation, level of gearing and assets in line with International Accounting Standard 15 (IAS15 in order to calculate an inflation-adjusted version of the economic value added (EVA measure. The study was conducted using data from South African industrial firms during a period characterised by highly variable inflation levels (1991-2005. The results indicate that during this period there were significant differences between the nominal and real values of the firms’ EVAs

Technical Publications as Indicators for Nuclear Fuel Cycle Declarable Activities

International Nuclear Information System (INIS)

Schuler, R.; El Gebaly, A.; Feldman, Y.; Gagne, D.; Schot, P.-M.; Ferguson, M.

2015-01-01

The Department of Safeguards aims to provide credible assurances to the international community that States are fulfiling their safeguards obligations in that all nuclear material remains in peaceful use. It does so in part by developing and implementing methodologies for early detection of undeclared activities or misuse of nuclear material or technology, based on large and diverse sources of information. Analyzing scientific, technical and patent information allows analysts in the Department to understand the technology available to a State, to forecast possible technical developments, to map collaborative research activities within and across States, and compare that information with declarations received by the State for completeness and correctness. Furthermore, with regard to patent information, scientists or companies want to make sure their intellectual property is protected; accordingly, patents are frequently filed before the information is published elsewhere, making patent information also an early indicator of relevant activities. Dealing with such large information sources requires the use of an innovative methodology conducting analysis. The Department has recently begun to examine the efficacy of link analysis tools to help carry out its mission. Using the link analysis platform Palantir, the authors conducted several case studies with the aim of deriving sound analytical results from large amounts of technical information within a reasonable time frame. The authors used data sets of bibliographic references from the IAEA International Nuclear Information System (INIS),Web of Science, Science Direct and data on worldwide patents from the European Patent Office (EPO). Based on these case studies, the authors are developing methodologies for the efficient application of link analysis to scientific and technical information, thus strengthening the Department's information collection and analysis capabilities and the overall process of State

Minilaparoscopic fundoplication: technical adaptations and initial experience

Directory of Open Access Journals (Sweden)

Daniellson Dimbarre

2012-09-01

Full Text Available CONTEXT: Gastroesophageal reflux diasease (GERD is a highly prevalent disease. Treatment is divided into lifestyle modifications, medical and surgical treatment. Surgical laparoscopy is the gold standard treatment. In the last decade, there were an extensive research on procedures, less aggressive than laparoscopy and with better esthetic results. Minilaparoscopy is "reemerging" as a safe, effective and with excellent cosmetic results in selected patients treated for gastroesophageal reflux diasease. We present a serie of 27 patients treated for GERD by minilaparoscopic laparoscopy. MATERIAL: Between October 2009July 2011 a total of 27 patients underwent fundoplication by minilaparoscopy. It is used one 10mm trocar, a telescope of 30 degrees and four 3 mm trocars at regular positions. Regular surgical steps are done with no modifications. Cardiac tape, suture needles, and eventually extracting bag, gauze, are placed and taked out through the umbilical port. With these technical adjustments, we can perform the procedure safely and effectively, similarly to standard laparoscopic technique. RESULTS: Of the 27 patients, 22 were female and 5 male. The average body mass index was 25.5 kg/m². Hiatal hernias were small (<3 cm in 24 patients. Mean operative time was 60 minutes. In all cases the hiatoplasty was performed with simple or 'x' stiches of 2.0 Ethibond. There was no need for conversion to standard laparoscopy or open surgery. The length of hospital stay was less than or equal to 24 hours in all patients. In this series of patients there were no postoperative complications. We did not observe any complication of the surgical wound. There were no evidence of recurrence of symptoms or endoscopic changes. CONCLUSION: Hiatoplasty associated with fundoplication using minilaparoscopic instruments is safe, feasible and effective. If compared to other "new access", has a spectacular esthetic results. Can be done with only minor technical adjustments

Technical approach to groundwater restoration

International Nuclear Information System (INIS)

1993-01-01

The Technical Approach to Groundwater Restoration (TAGR) provides general technical guidance to implement the groundwater restoration phase of the Uranium Mill Tailings Remedial Action (UMTRA) Project. The TAGR includes a brief overview of the surface remediation and groundwater restoration phases of the UMTRA Project and describes the regulatory requirements, the National Environmental Policy Act (NEPA) process, and regulatory compliance. A section on program strategy discusses program optimization, the role of risk assessment, the observational approach, strategies for meeting groundwater cleanup standards, and remedial action decision-making. A section on data requirements for groundwater restoration evaluates the data quality objectives (DQO) and minimum data required to implement the options and comply with the standards. A section on sits implementation explores the development of a conceptual site model, approaches to site characterization, development of remedial action alternatives, selection of the groundwater restoration method, and remedial design and implementation in the context of site-specific documentation in the site observational work plan (SOWP) and the remedial action plan (RAP). Finally, the TAGR elaborates on groundwater monitoring necessary to evaluate compliance with the groundwater cleanup standards and protection of human health and the environment, and outlines licensing procedures

Biomass heating at East Surrey Hospital: technical evaluation

Energy Technology Data Exchange (ETDEWEB)

Landen, R; Rippengal, R

2000-07-01

This report provides the results of a detailed evaluation of the proposed biomass heating installation at East Surrey Hospital. It is intended to allow the Trust to make a decision on whether to proceed further with the scheme and, if so, on what basis. Specific areas assessed and reported on include: existing services provision for heating and cooling; technical aspects of the proposed biomass scheme; commercial aspects of the proposed biomass scheme. (author)

Biomedical Engineering at the Technical University of Denmark

DEFF Research Database (Denmark)

Jensen, Jørgen Arendt; Andersen, Ole Trier; Wilhjelm, Jens Erik

1998-01-01

The paper gives a brief overview of the biomedical engineering research and education at the Technical University of Denmark. An account of the research activities since the 1950?s is given, and examples of major efforts within ultrasound, biomagnetism, and neuroimaging are described. The evolution...... of the teaching activities since the late 1960?s along with an account of the recent initiatives to make a biomedical engineering profile at the university is described....

Methodological approach to participatory formulation of agricultural technical assistance plans with territorial approach

Directory of Open Access Journals (Sweden)

Holmes Rodríguez Espinosa

2015-10-01

Full Text Available The collective identification of needs and shared decision-making in projects’ formulation for agricultural development is a process that requires the identification of participatory methodologies to promote active and reflective engagement of producers. The aim of this study was to evaluate a methodological approach for participatory formulation of technical assistance plan with territorial approach. Matrix analysis for the identification and prioritization of the most limiting technical assistance factors for milk production was performed and alternative solutions were defined, through participatory workshops with farmers. The results show the advantages of a collective reflection with stakeholders and quantitative tools reducing subjectivity in decision-making, improving participation in their own development and identifying acceptable alternatives to farmers and viable to the municipality in order to improve lack of pasture and forage management, implementation of good agricultural practices GAP and rational use of agrochemicals.

Instructional Alignment of Workplace Readiness Skills in Career and Technical Education

Science.gov (United States)

Martin, Sarah Jane

2009-01-01

The United States faces a skills shortage that goes beyond academic and technical skills. Employers report entry-level workers lack the necessary "soft" skills, also referred to as workplace readiness skills, needed for success in the workforce; thus, calling on educational institutions to make improvements in high school curriculum in…

Cooperation of Russian and EU technical support organizations

International Nuclear Information System (INIS)

Kuznetsov, M.V.; Kozlov, Vl.V.; Kapralov, E.Yu.

2007-01-01

Since 1992, the fruitful collaboration of the Russian and Western-European technical support organizations (TSOs) is being continued due to the support of the European Commission. There are two main areas of activities. The first one is more of methodological assistance and enhancing RF TSOs capabilities to support Rostekhnadzor decision making process. Experience and knowledge acquired in this area projects increase RF TSOs capabilities regarding a wide spectrum of safety related issues assessment, in particular safety analyses, reactor vessel embrittlement, application of 'leak before break' concept, severe accident and accident management, fire risk evaluation, etc. The second area is focused on licensing related assessments of EC financed on site assistance projects (modernisations). This area projects promote implementation in Russia a licensing process based on a technical dialogue between operator and regulator as well contributes to transfer of Western practice in assessment of NPPs modernization. The improvement of managerial, scientific and technical capabilities of RF TSO experts may be considered as noteworthy and practical result of the TSOs cooperation. The continuation of such modality of RF and EU TSOs cooperation will be a good basis to cope with present and future challenges faced by TSOs in enhancing nuclear safety. (author)

First adjustments in the solar industry

International Nuclear Information System (INIS)

Deye, M.

2009-01-01

The European environmental policy goal is to generate 23% of the end-use power consumption from renewable energy sources by 2020. The solar photovoltaic market has shown an exponential growth since 1998 with a record rise of installed capacities in 2008 (+61%). In 2009, the growth should reach 30% only. The solar industry has to face the conjugated effects of the demand decay and of the credit crisis which has led to over-capacities and prices drop. The crisis has hit the solar cell manufacturers but for some of them, it is an opportunity to make some strategic adjustments and to develop products with a higher added value. The market and the demand are still there but the clients encounter more difficulties to obtain the credits for their projects. (J.S.)

Glossary of technical terms for the medical technology professionals.

Directory of Open Access Journals (Sweden)

Rafael Felipe García Rodríguez

2014-03-01

Full Text Available The current work is a glossary of technical terms in English language for Medical Health Professionals, has been prepared due to the lack of technical lexicon the students have during and after their university studies, that is, the students have a deficit of technical words which limits their professional competence and accountability. This shortage limits them and makes it a great laboring challenge if they have to work overseas in English-speaking countries. The glossary comprises the main and necessary words which are needed for this type of professional in their field of action. These graduates have a solid knowledge and comprehension of biological, biochemical and biophysical fundamentals in their mother tongue but they do not have the necessary elements in the target language to operate properly. It is a need that they can work appropriately in the spheres of prevention, promotion and health recovery to support a diagnosis, a treatment and a management not only in their mother tongue but in English for their future work.

Active Control of Thermostatic Loads for Economic and Technical Support to Distribution Grids

DEFF Research Database (Denmark)

Bhattarai, Bishnu Prasad; Mendaza, Iker Diaz de Cerio; Bak-Jensen, Birgitte

2016-01-01

Active control of electric water heaters (EWHs) is presented in this paper as a means of exploiting demand flexibility for supporting low-voltage (LV) distribution grids. A single-node model of an EWH is implemented in DIgSILENT PowerFactory using a thermal energy balancing equation and three...... decentralized control schemes are designed to ensure consumer comfort, economic benefit to the consumer, and technical support to LV grids. First, a price-based control that adaptively adjusts an allowable energy band per electricity price is implemented to ensure economic benefit. Next, an adaptive update...... of the energy band is done based on feeder loading to respect thermal grid constraints. Finally, a voltage-based control is implemented to provide real-time voltage support to the LV grids. Simulation results demonstrate the capability of the presented method to realize both economic and technical advantages...

RELATIONSHIP BETWEEN LIFE BUILDING SKILLS AND SOCIAL ADJUSTMENT OF STUDENTS WITH HEARING IMPAIRMENT: IMPLICATIONS FOR COUNSELING

Directory of Open Access Journals (Sweden)

Samuel O. ADENIYI

2017-10-01

Full Text Available Introduction Hearing impairment contributes greatly to social and psychological deficits of the affected individuals, which can affect their interpersonal relation. The inability to hear and communicate effectively results in adjustment problem that leads to social isolation. Objectives: The objective of this study is to examine the relationship between life building skills and social adjustment of students with hearing impairment. Methods: The study employed descriptive survey research design. The samples consisted of 150 students with hearing impairment purposively selected from two inclusive schools in Lagos state, Nigeria. The samples comprised of 65 boys and 85 girls with age range between 15 and 18 years in the Senior Secondary School. The instruments used for data collection were Life building skills inventory (adapted with reliability of 0.80 and Social adjustment scale (Self developed. The instruments consisted of two sections namely: A&B. Section A of Life building skills contained bio- data of the respondents, while B contained 3 subscales: Self-efficacy inventory adapted from Schwarzer and Jerusalem 1995 with reliability of 0.85, Decision-making inventory adapted from Rowe 1997 with reliability of 0.75, Assertiveness inventory adapted from Aberti and Emmons 1995 with reliability of 0.80. The self-constructed Social Adjustment scale contained 10 items probing questions with reliability of 0.69. Data collected was analysed using Pearson Product Moment Correlation and Multiple Regression. Results: The results revealed relative contributions of some life building skills to social adjustment of students with hearing impairment. There were joint contributions of the independent variables to dependent variable, while decision-making contributed mostly. Conclusion: This study examined relationship between life building skills and social adjustment of students with hearing impairment with a bid to provide adequate counseling services. It was

Internet - Technical Developments and Applications 2

CERN Document Server

Tkacz, Ewaryst; Rostanski, Maciej

2012-01-01

The unusual direct progress of civilization in many fields concerning technical sciences is being observed in the period of last two decades. Experiencing extraordinary dynamics of the development of technological processes, particularly in ways of communicating, makes us believe that  the information society is coming into existence. Having the information in today’s world of changing attitudes and socio-economic conditions can be perceived as one of the most important advantages. The content of this book is divided into four parts: ·         Mathematical and technical fundamentals, ·         Information management systems and project management ·         Information security and business continuity management ·         Interdisciplinary problems This monograph has been prepared to contribute in a significant way to the success of implementing consequences of human imagination  into social life. The authors believe that this monograph will influence the further technol...

Technical specifications review of nuclear power plants: a risk-informed evaluation

International Nuclear Information System (INIS)

Saldanha, Pedro Luiz da Cruz; Sousa, Anna Leticia; Frutuoso e Melo, Paulo Fernando Ferreira; Duarte, Juliana Pacheco

2012-01-01

The use of risk information by a regulatory body as part of an integrated decision making process addresses the way in which risk information is being used as part of an integrated process in making decisions about safety issues at nuclear plants – commonly referred to as risk-informed decision making. The risk-informed approach aims to integrate in a systematic manner quantitative and qualitative, deterministic and probabilistic safety considerations to obtain a balanced decision. Probabilistic Safety Assessment (PSA) is a methodology that can be applied to provide a structured analysis process to evaluate the frequency and consequences of accidents scenarios in nuclear power plants. Technical Specifications (TS) are specifications regarding the characteristics of nuclear power plants (variables, systems or components) of overriding importance to nuclear safety and radiation protection, which is an integral part of plant operation authorization. Limiting Conditions of Operation (LCO) are the minimum levels of performance or capacity or operating system components required for the safe operation of nuclear plants, as defined in technical specifications. The Maintenance Rule (MR) is a requirement established by the U. S. Nuclear Regulatory Commission (NRC) to check the effectiveness of maintenance carried out in nuclear plants, and plant configuration control. The control of plant configuration is necessary to verify the impact of the maintenance of a safety device out of service on plant safety. The Electric Power Research Institute (EPRI) has assessed the role of probabilistic safety analysis in the regulation of nuclear power plants with the following objectives: a) to provide utilities with an approach for developing and implementing nuclear power station risk-managed technical specification programs; and b) to complement and supplement existing successful configuration risk management applications such as MR. This paper focuses on the evaluation of EPRI

Technical know-how of site descriptive modeling for site characterization - 59089

International Nuclear Information System (INIS)

Saegusa, Hiromitsu; Onoe, Hironori; Doke, Ryosuke; Niizato, Tadafumi; Yasue, Ken-ichi

2012-01-01

The site descriptive model covering the current status of characteristics of geological environment and the site evolution model for estimation of the long-term evolution of site conditions are used to integrate multi-disciplinary investigation results. It is important to evaluate uncertainties in the models, to specify issues regarding the uncertainties and to prioritize the resolution of specified issues, for the planning of site characterization. There is a large quantity of technical know-how in the modeling process. It is important to record the technical know-how with transparency and traceability, since site characterization projects generally need long duration. The transfer of the technical know-how accumulated in the research and development (R and D) phase to the implementation phase is equally important. The aim of this study is to support the planning of initial surface-based site characterizations based on the technical know-how accumulated from the underground research laboratory projects. These projects are broad scientific studies of the deep geological environment and provide a technical basis for the geological disposal of high-level radioactive wastes. In this study, a comprehensive task flow from acquisition of existing data to planning of field investigations through the modeling has been specified. Specific task flow and decision-making process to perform the tasks have been specified. (authors)

Price adjustment for traditional Chinese medicine procedures: Based on a standardized value parity model.

Science.gov (United States)

Wang, Haiyin; Jin, Chunlin; Jiang, Qingwu

2017-11-20

Traditional Chinese medicine (TCM) is an important part of China's medical system. Due to the prolonged low price of TCM procedures and the lack of an effective mechanism for dynamic price adjustment, the development of TCM has markedly lagged behind Western medicine. The World Health Organization (WHO) has emphasized the need to enhance the development of alternative and traditional medicine when creating national health care systems. The establishment of scientific and appropriate mechanisms to adjust the price of medical procedures in TCM is crucial to promoting the development of TCM. This study has examined incorporating value indicators and data on basic manpower expended, time spent, technical difficulty, and the degree of risk in the latest standards for the price of medical procedures in China, and this study also offers a price adjustment model with the relative price ratio as a key index. This study examined 144 TCM procedures and found that prices of TCM procedures were mainly based on the value of medical care provided; on average, medical care provided accounted for 89% of the price. Current price levels were generally low and the current price accounted for 56% of the standardized value of a procedure, on average. Current price levels accounted for a markedly lower standardized value of acupuncture, moxibustion, special treatment with TCM, and comprehensive TCM procedures. This study selected a total of 79 procedures and adjusted them by priority. The relationship between the price of TCM procedures and the suggested price was significantly optimized (p based on a standardized value parity model is a scientific and suitable method of price adjustment that can serve as a reference for other provinces and municipalities in China and other countries and regions that mainly have fee-for-service (FFS) medical care.

Should adjustment disorder be conceptualized as transitional disorder? In pursuit of adjustment disorders definition.

Science.gov (United States)

Israelashvili, Moshe

2012-12-01

The DSM classification of an adjustment disorder is frequently criticized for not being well differentiated from other disorders. A possible reason for this is the vague definition of the term adjustment in social science literature. Hence, the current paper discusses the definition of adjustment and its implications for understanding maladjustment. Differential definitions of the terms adjustment, adaptation, socialization and coping are outlined, leading to the proposition that each one of them represents a different type of demand that is imposed on an individual who encounters a transitional event. Moreover, the four types of demands might be the possible sources of maladjustment. Helping people in transition requires an identification of the source, or combination of sources, that have led to the adjustment problem first, followed by the implementation of an adequate helping approach.

2011 PERFORMANCE ASSESSMENT COMMUNITY OF PRACTICE TECHNICAL EXCHANGE - SUMMARY

Energy Technology Data Exchange (ETDEWEB)

Seitz, R.

2011-12-30

The Performance Assessment Community of Practice (PA CoP) was developed in 2008 to improve consistency and quality in the preparation of performance assessments (PAs) and risk assessments across the Department of Energy (DOE) Complex. The term, PA, is used to represent all of these modeling applications in this report. The PA CoP goals are to foster the exchange of information among PA practitioners and to share lessons learned from PAs conducted for DOE, commercial disposal facilities, and international entities. Technical exchanges and workshops are a cornerstone of PA CoP activities. Previous technical exchanges have addressed Engineered Barriers (2009 - http://www.cresp.org/education/workshops/pacop/), the Advanced Simulation Capability for Environmental Management and the Cementitious Barriers Partnership (2010 - http://srnl.doe.gov/copexchange/links.htm). Each technical exchange also includes summary presentations regarding activities at DOE, the Nuclear Regulatory Commission (NRC) and other organizations (e.g., International Atomic Energy Agency (IAEA)) as well as a number of presentations from selected sites to provide insight and perspective from on-going modeling activities. Through the deployment of PA Assistance Teams, the PA CoP has also been engaged in the development of new PAs across the DOE Complex. As a way of improving consistency in the preparation of new PAs, the teams provide technical advice and share experiences, noteworthy practices, and lessons learned from previous Low-Level Waste Disposal Facility Federal Review Group (LFRG) reviews. Teams have provided support for PAs at Hanford, Idaho, Paducah and Portsmouth. The third annual PA CoP Technical Exchange was held on May 25-26, 2011 in Atlanta, GA. The PA CoP Steering Committee Meeting held its first meeting on May 24 prior to the Technical Exchange. Decision making using models and software quality assurance were the topical emphasis for the exchange. A new feature at the 2011 technical

Developing a transnational electricity infrastructure offshore: interdependence between technical and regulatory solutions

NARCIS (Netherlands)

Hendriks, R.L.; Gibescu, M.; Roggenkamp, M.M.; Kling, W.L.

2010-01-01

This paper aims at identifying the options for designing an offshore electricity grid and the legal instruments to create such a grid. It will make a first attempt at presenting the technical and legal considerations which coastal states, EU and national legislators and policy makers should take

Do failures in non-technical skills contribute to fatal medical accidents in Japan? A review of the 2010-2013 national accident reports.

Science.gov (United States)

Uramatsu, Masashi; Fujisawa, Yoshikazu; Mizuno, Shinya; Souma, Takahiro; Komatsubara, Akinori; Miki, Tamotsu

2017-02-16

We sought to clarify how large a proportion of fatal medical accidents can be considered to be caused by poor non-technical skills, and to support development of a policy to reduce number of such accidents by making recommendations about possible training requirements. Summaries of reports of fatal medical accidents, published by the Japan Medical Safety Research Organization, were reviewed individually. Three experienced clinicians and one patient safety expert conducted the reviews to determine the cause of death. Views of the patient safety expert were given additional weight in the overall determination. A total of 73 summary reports of fatal medical accidents were reviewed. These reports had been submitted by healthcare organisations across Japan to the Japan Medical Safety Research Organization between April 2010 and March 2013. The cause of death in fatal medical accidents, categorised into technical skills, non-technical skills and inevitable progress of disease were evaluated. Non-technical skills were further subdivided into situation awareness, decision making, communication, team working, leadership, managing stress and coping with fatigue. Overall, the cause of death was identified as non-technical skills in 34 cases (46.6%), disease progression in 33 cases (45.2%) and technical skills in two cases (5.5%). In two cases, no consensual determination could be achieved. Further categorisation of cases of non-technical skills were identified as 14 cases (41.2%) of problems with situation awareness, eight (23.5%) with team working and three (8.8%) with decision making. These three subcategories, or combinations of them, were identified as the cause of death in 33 cases (97.1%). Poor non-technical skills were considered to be a significant cause of adverse events in nearly half of the fatal medical accidents examined. Improving non-technical skills may be effective for reducing accidents, and training in particular subcategories of non-technical skills may be

Advanced light source: Compendium of user abstracts and technical reports,1993-1996

Energy Technology Data Exchange (ETDEWEB)

None, None

1997-04-01

This compendium contains abstracts written by users summarizing research completed or in progress from 1993-1996, ALS technical reports describing ongoing efforts related to improvement in machine operations and research and development projects, and information on ALS beamlines planned through 1998. Two tables of contents organize the user abstracts by beamline and by area of research, and an author index makes abstracts accessible by author and by principal investigator. Technical details for each beamline including whom to contact for additional information can be found in the beamline information section. Separate abstracts have been indexed into the database for contributions to this compendium.

Stepwise decision making for the long-term management of radioactive waste

International Nuclear Information System (INIS)

Pescatore, C.; Vari, A.

2005-01-01

The context of long-term radioactive waste management is being shaped by changes in modern society. Values such as health, environmental protection and safety are increasingly important, as are trends towards improved forms of participatory democracy that demand new forms of risk governance in dealing with hazardous activities. These changes in turn necessitate new forms of dialogue and decision-making processes that include a large number of stakeholders. The new dynamic of dialogue and decision-making process has been characterised as a shift from a more traditional 'decide, announce and defend' model, focused on technical assurance, to one of 'engage, interact and cooperate', for which both technical assurance and quality of the process are of comparable importance to a constructive outcome. Consequently, the scientific and engineering aspects of waste management safety are no longer of exclusive importance. Organisational ability to communicate and to adapt to the new context has emerged as a critical contributor to public confidence. In the new decision-making context it is clear that (a) any significant decisions regarding the long-term management of radioactive waste will be accompanied by a comprehensive public review with involvement of a diverse range of stakeholders; (b) the public, and especially the local public, are not willing to commit irreversibly to technical choices on which they have insufficient familiarity and understanding; and (c) any management options will take decades to be developed and implemented, which will involve stakeholders who have not yet been born. Thus, a 'decision' no longer means opting for, in one go and for all time, a complete package solution. Instead, a decision is one step in an overall, cautious process of examining and making choices that preserve the safety and well-being of the present generation and the coming ones while not needlessly depriving the latter of their right of choice. Consideration is thus

Technical basis for removal of 221-T tunnel from airborne radiological area status

International Nuclear Information System (INIS)

Geuther, W.J.

1996-01-01

This document provides the technical basis for removal of the 221-T Tunnel from airborne radiological control. T Plant Radiological Control has evaluated air sampling data and engineering controls, and determined the necessary administrative controls to make this transition. With these administrative controls (specified within document) in place, the tunnel can be removed from Airborne Radioactive Area status. The removal of the tunnel from airborne status will allow work to be performed within the tunnel under controlled conditions, as outlined in this technical basis, without the use of respiratory protection equipment

Adjustable Pitot Probe

Science.gov (United States)

Ashby, George C., Jr.; Robbins, W. Eugene; Horsley, Lewis A.

1991-01-01

Probe readily positionable in core of uniform flow in hypersonic wind tunnel. Formed of pair of mating cylindrical housings: transducer housing and pitot-tube housing. Pitot tube supported by adjustable wedge fairing attached to top of pitot-tube housing with semicircular foot. Probe adjusted both radially and circumferentially. In addition, pressure-sensing transducer cooled internally by water or other cooling fluid passing through annulus of cooling system.

Atoms for peace: Targeting technical cooperation for results

International Nuclear Information System (INIS)

Qian Jihui; Tisue, T.; Volkoff, A.

2000-01-01

The evolution of the Technical Co-operation Programme has been striking. In 1958 few countries boasted nuclear industries. That year the IAEA started technical assistance with the provision of a number of fellowships, expanding to provision of equipment and experts the following year. Today nuclear industries exist in all regions. The Agency has programmes in nearly 100 countries, disburses approximately $65 million per year and can use the capacity developed in earlier years as a springboard for further development. The aim now is to make a visible and positive difference in direct support of priority development goals in various countries and regions. The IAEA's new strategy for technical cooperation includes three major elements: (i) Model Projects: Model Projects set high standards for project design to ensure they respond to real needs of a country, produce significant economic or social impact through the end user, reflect the distinct advantages of nuclear technology over other approaches and enjoy strong government commitment. (ii) Country Programme Frameworks: Country Programme Frameworks help focus the IAEA Technical Cooperation Programme with countries on a few priority areas that can lead to significant results. (iii) Thematic/Sectoral Plans: Thematic Planning exercises identify best practices in a given thematic area, assess nuclear techniques against conventional or up-and-coming techniques, ascertain what pre-conditions are necessary in a country to ensure work in a given thematic area will have impact, and identify other partners working in that thematic area

Seat Adjustment Design of an Intelligent Robotic Wheelchair Based on the Stewart Platform

Directory of Open Access Journals (Sweden)

Po Er Hsu

2013-03-01

Full Text Available A wheelchair user makes direct contact with the wheelchair seat, which serves as the interface between the user and the wheelchair, for much of any given day. Seat adjustment design is of crucial importance in providing proper seating posture and comfort. This paper presents a multiple-DOF (degrees of freedom seat adjustment mechanism, which is intended to increase the independence of the wheelchair user while maintaining a concise structure, light weight, and intuitive control interface. This four-axis Stewart platform is capable of heaving, pitching, and swaying to provide seat elevation, tilt-in-space, and sideways movement functions. The geometry and types of joints of this mechanism are carefully arranged so that only one actuator needs to be controlled, enabling the wheelchair user to adjust the seat by simply pressing a button. The seat is also equipped with soft pressure-sensing pads to provide pressure management by adjusting the seat mechanism once continuous and concentrated pressure is detected. Finally, by comparing with the manual wheelchair, the proposed mechanism demonstrated the easier and more convenient operation with less effort for transfer assistance.

Aspects of capital budgeting decision-making process of emerging markets transnational corporations

OpenAIRE

Alieva, D.

2012-01-01

Considers present-day aspects of capital budgeting decision-making in investment projects by transnational corporations (TNCs) in emerging markets. Discusses peculiarities of cash flows of TNC mother and project companies which influence the decision-making in project investment. A number of effective valuation techniques for multicurrency projects has been proposed, taking into account adjustments for various factors.

Technical innovation and management

Energy Technology Data Exchange (ETDEWEB)

Yoon, Yang Cheol

1982-08-15

This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

Technical innovation and management

International Nuclear Information System (INIS)

Yoon, Yang Cheol

1982-08-01

This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

The struggle towards 'the New Normal': a qualitative insight into psychosexual adjustment to prostate cancer.

Science.gov (United States)

Hanly, Narelle; Mireskandari, Shab; Juraskova, Ilona

2014-07-30

Despite the growing body of literature which highlights the potential for significant and enduring side-effects of prostate cancer treatment, there is limited research exploring the experience of living with the treatment-induced side-effects such as sexual dysfunction, and their repercussions for men and their partners. The aim of this qualitative study was to explore factors influencing psychosexual adjustment, self-perception, and unmet information and support needs of prostate cancer patients and their partners. Twenty-one men, recruited via a prostate cancer support group newsletter, participated in face-to-face semi-structured interviews, which were subjected to thematic analysis. The qualitative analysis revealed three inter-connected main themes which contributed to men's psychosexual adjustment: i) Psychosexual impact, ii) Communication and support, and iii) Integration process. Men reported distressing sexual and urinary difficulties, tainted self-perception and altered intimate relationships. Receiving adequate information and support, and having good communication with their doctors and partners facilitated better adjustment to prostate cancer treatment. Coming to terms with the significant impact of treatment had involved making lifestyle changes, coping with emotional struggles and striving to accept and integrate their post-treatment "new normal" self and sexual life. The importance of adequate communication with health professionals and partners, especially regarding treatment effects on sexual function and rehabilitation options, was highlighted as a key factor facilitating the adjustment process. Prostate cancer patients would benefit from improved access to timely and tailored information and decision-making resources, ongoing multidisciplinary care, and support groups, as well as appropriate referrals for sexual and psychological counselling.

Technical Performance as a Predictor of Clinical Outcomes in Laparoscopic Gastric Cancer Surgery.

Science.gov (United States)

Fecso, Andras B; Bhatti, Junaid A; Stotland, Peter K; Quereshy, Fayez A; Grantcharov, Teodor P

2018-03-23

The purpose of this study was to evaluate the relationship between technical performance and patient outcomes in laparoscopic gastric cancer surgery. Laparoscopic gastrectomy for cancer is an advanced procedure with high rate of postoperative morbidity and mortality. Many variables including patient, disease, and perioperative management factors have been shown to impact postoperative outcomes; however, the role of surgical performance is insufficiently investigated. A retrospective review was performed for all patients who had undergone laparoscopic gastrectomy for cancer at 3 teaching institutions between 2009 and 2015. Patients with available, unedited video-recording of their procedure were included in the study. Video files were rated for technical performance, using Objective Structured Assessments of Technical Skills (OSATS) and Generic Error Rating Tool instruments. The main outcome variable was major short-term complications. The effect of technical performance on patient outcomes was assessed using logistic regression analysis with backward selection strategy. Sixty-one patients with available video recordings were included in the study. The overall complication rate was 29.5%. The mean Charlson comorbidity index, type of procedure, and the global OSATS score were included in the final predictive model. Lower performance score (OSATS ≤29) remained an independent predictor for major short-term outcomes (odds ratio 6.49), while adjusting for comorbidities and type of procedure. Intraoperative technical performance predicts major short-term outcomes in laparoscopic gastrectomy for cancer. Ongoing assessment and enhancement of surgical skills using modern, evidence-based strategies might improve short-term patient outcomes. Future work should focus on developing and studying the effectiveness of such interventions in laparoscopic gastric cancer surgery.

Planned Hypothesis Tests Are Not Necessarily Exempt From Multiplicity Adjustment

Directory of Open Access Journals (Sweden)

Andrew V. Frane

2015-10-01

Full Text Available Scientific research often involves testing more than one hypothesis at a time, which can inflate the probability that a Type I error (false discovery will occur. To prevent this Type I error inflation, adjustments can be made to the testing procedure that compensate for the number of tests. Yet many researchers believe that such adjustments are inherently unnecessary if the tests were “planned” (i.e., if the hypotheses were specified before the study began. This longstanding misconception continues to be perpetuated in textbooks and continues to be cited in journal articles to justify disregard for Type I error inflation. I critically evaluate this myth and examine its rationales and variations. To emphasize the myth’s prevalence and relevance in current research practice, I provide examples from popular textbooks and from recent literature. I also make recommendations for improving research practice and pedagogy regarding this problem and regarding multiple testing in general.

Adjustment of gripping force by optical systems

Science.gov (United States)

Jalba, C. K.; Barz, C.

2018-01-01

With increasing automation, robotics also requires ever more intelligent solutions in the handling of various tasks. In this context, many grippers must also be re-designed. For this, they must always be adapted for different requirements. The equipment of the gripper systems with sensors should help to make the gripping process more intelligent. In order to achieve such objectives, optical systems can also be used. This work analyzes how the gripping force can be adjusted by means of an optical recognition. The result of this work is the creation of a connection between optical recognition, tolerances, gripping force and real-time control. In this way, algorithms can be created, with the aid of which robot grippers as well as other gripping systems become more intelligent.

Technical Submission Form: Technical Specification of a Wave Energy Farm.

Energy Technology Data Exchange (ETDEWEB)

Roberts, Jesse D.; Kim Nielsen; Ben Kennedy; Bull, Diana L; Costello, Ronan Patrick; Jochem Weber

2017-04-01

The Wave - SPARC project developed the Technology Performance Level (TPL) assessment procedure based on a rigorous Systems Engineering exercise. The TPL assessment allows a whole system evaluation of Wave Energy Conversion Technology by measuring it against the requirements determined through the Systems Engineering exercise. The TPL assessment is intended to be useful in technology evaluation; in technology innovation; in allocation of public or priva te investment, and; in making equipment purchasing decisions. This Technical Submission Form (TSF) serves the purpose of collecting relevant and complete information, in a technology agnostic way, to allow TPL assessment s to be made by third party assessor s. The intended usage of this document is that the organization or people that are performing the role of developers or promoters of a particular technology will use this form to provide the information necessary for the organization or people who are perf orming the assessor role to use the TPL assessment.

Development of a Behavioural Marker System for Rating Cadet’s Non-Technical Skills

Directory of Open Access Journals (Sweden)

Victor Fernando PlÁcido da ConceiçÌo

2017-06-01

Full Text Available Despite the adoption of crew resource management training for bridge teams over the last decades, the training is still heavily focussed on technical achievements. In an educational context, the situation is more problematical, since with requirement of developing the technical skills, there is a need to build and evaluate the non-technical skills of cadets with little experience in bridge team management. In parallel with the application of team leadership models, the Portuguese Naval Academy conducted a research to improve the development and assessment of non-technical skills in bridge simulators. This paper describes the method used to identify the key non-technical skills required for naval cadets and to develop a behavioural marker system for their measurement. A literature review of behavioural marker systems was supplemented with an analysis of interviews conducted with students and simulator instructors. Additionally, further analysis of Portuguese Navy accidents reports was made, applying the HFACS framework to identify the relevant non-technical skills involved in the accidents. The resulting rating system covers five skill categories (leadership, situational awareness, communication, team work and decision making, each one with three rating elements. The framework is currently under evaluation tests in bridge simulators sessions, within an educational context.

Computers in technical information transfer

Energy Technology Data Exchange (ETDEWEB)

Price, C.E.

1978-01-01

The use of computers in transferring scientific and technical information from its creation to its use is surveyed. The traditional publication and distribution processes for S and T literature in past years have been the vehicle for transfer, but computers have altered the process in phenomenal ways. Computers are used in literature publication through text editing and photocomposition applications. Abstracting and indexing services use computers for preparing their products, but the machine-readable document descriptions created for this purpose are input to a rapidly growing computerized information retrieval service industry. Computer use is making many traditional processes passe, and may eventually lead to a largely ''paperless'' information utility.

Capacitance-based frequency adjustment of micro piezoelectric vibration generator.

Science.gov (United States)

Mao, Xinhua; He, Qing; Li, Hong; Chu, Dongliang

2014-01-01

Micro piezoelectric vibration generator has a wide application in the field of microelectronics. Its natural frequency is unchanged after being manufactured. However, resonance cannot occur when the natural frequencies of a piezoelectric generator and the source of vibration frequency are not consistent. Output voltage of the piezoelectric generator will sharply decline. It cannot normally supply power for electronic devices. In order to make the natural frequency of the generator approach the frequency of vibration source, the capacitance FM technology is adopted in this paper. Different capacitance FM schemes are designed by different locations of the adjustment layer. The corresponding capacitance FM models have been established. Characteristic and effect of the capacitance FM have been simulated by the FM model. Experimental results show that the natural frequency of the generator could vary from 46.5 Hz to 42.4 Hz when the bypass capacitance value increases from 0 nF to 30 nF. The natural frequency of a piezoelectric vibration generator could be continuously adjusted by this method.

Capacitance-Based Frequency Adjustment of Micro Piezoelectric Vibration Generator

Directory of Open Access Journals (Sweden)

Xinhua Mao

2014-01-01

Full Text Available Micro piezoelectric vibration generator has a wide application in the field of microelectronics. Its natural frequency is unchanged after being manufactured. However, resonance cannot occur when the natural frequencies of a piezoelectric generator and the source of vibration frequency are not consistent. Output voltage of the piezoelectric generator will sharply decline. It cannot normally supply power for electronic devices. In order to make the natural frequency of the generator approach the frequency of vibration source, the capacitance FM technology is adopted in this paper. Different capacitance FM schemes are designed by different locations of the adjustment layer. The corresponding capacitance FM models have been established. Characteristic and effect of the capacitance FM have been simulated by the FM model. Experimental results show that the natural frequency of the generator could vary from 46.5 Hz to 42.4 Hz when the bypass capacitance value increases from 0 nF to 30 nF. The natural frequency of a piezoelectric vibration generator could be continuously adjusted by this method.

Adolescent Mothers' Adjustment to Parenting.

Science.gov (United States)

Samuels, Valerie Jarvis; And Others

1994-01-01

Examined adolescent mothers' adjustment to parenting, self-esteem, social support, and perceptions of baby. Subjects (n=52) responded to questionnaires at two time periods approximately six months apart. Mothers with higher self-esteem at Time 1 had better adjustment at Time 2. Adjustment was predicted by Time 2 variables; contact with baby's…

Technical Network

CERN Multimedia

2007-01-01

In order to optimize the management of the Technical Network (TN), to ease the understanding and purpose of devices connected to the TN, and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive email notifications from IT/CS asking them to add the corresponding information in the network database. Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

Technical data management at the Yucca Mountain Site Characterization Project

International Nuclear Information System (INIS)

Statler, J.; Newbury, C.M.; Heitland, G.W.

1992-01-01

The Department of Energy/Office of Civilian Radioactive waste Management (DOE/OCRWM) is responsible for the characterization of Yucca Mountain, Nevada, to determine its potential as a site of a high-level radioactive waste repository. The characterization of Yucca Mountain encompasses many diverse investigations, both onsite and in laboratories across the country. Investigations are being conducted of the geology, hydrology, mineralogy, paleoclimate, geotechnical properties, and archeology of the area, to name a few. Effective program management requires that data from site investigations be processed, interpreted and disseminated in a timely manner to support model development and validation, repository design, and performance assessment. The Program must also meet regulatory requirements for making the technical data accessible to a variety of external users throughout the life of the Project. Finally, the DOE/OCRWM must make available the data or its description and access location available for use in support of the license application and supporting documentation. To accomplish these objectives, scientific and engineering data, generated by site characterization activities, and technical data, generated by environmental and socioeconomic impact assessment activities, must be systematically identified, cataloged, stored and disseminated in a controlled manner

Using the Nudge and Shove Methods to Adjust Item Difficulty Values.

Science.gov (United States)

Royal, Kenneth D

2015-01-01

In any examination, it is important that a sufficient mix of items with varying degrees of difficulty be present to produce desirable psychometric properties and increase instructors' ability to make appropriate and accurate inferences about what a student knows and/or can do. The purpose of this "teaching tip" is to demonstrate how examination items can be affected by the quality of distractors, and to present a simple method for adjusting items to meet difficulty specifications.

Do failures in non-technical skills contribute to fatal medical accidents in Japan? A review of the 2010–2013 national accident reports

Science.gov (United States)

Uramatsu, Masashi; Fujisawa, Yoshikazu; Mizuno, Shinya; Souma, Takahiro; Komatsubara, Akinori; Miki, Tamotsu

2017-01-01

Objectives We sought to clarify how large a proportion of fatal medical accidents can be considered to be caused by poor non-technical skills, and to support development of a policy to reduce number of such accidents by making recommendations about possible training requirements. Design Summaries of reports of fatal medical accidents, published by the Japan Medical Safety Research Organization, were reviewed individually. Three experienced clinicians and one patient safety expert conducted the reviews to determine the cause of death. Views of the patient safety expert were given additional weight in the overall determination. Setting A total of 73 summary reports of fatal medical accidents were reviewed. These reports had been submitted by healthcare organisations across Japan to the Japan Medical Safety Research Organization between April 2010 and March 2013. Primary and secondary outcome measures The cause of death in fatal medical accidents, categorised into technical skills, non-technical skills and inevitable progress of disease were evaluated. Non-technical skills were further subdivided into situation awareness, decision making, communication, team working, leadership, managing stress and coping with fatigue. Results Overall, the cause of death was identified as non-technical skills in 34 cases (46.6%), disease progression in 33 cases (45.2%) and technical skills in two cases (5.5%). In two cases, no consensual determination could be achieved. Further categorisation of cases of non-technical skills were identified as 14 cases (41.2%) of problems with situation awareness, eight (23.5%) with team working and three (8.8%) with decision making. These three subcategories, or combinations of them, were identified as the cause of death in 33 cases (97.1%). Conclusions Poor non-technical skills were considered to be a significant cause of adverse events in nearly half of the fatal medical accidents examined. Improving non-technical skills may be effective for

Parental Divorce and Children's Adjustment.

Science.gov (United States)

Lansford, Jennifer E

2009-03-01

This article reviews the research literature on links between parental divorce and children's short-term and long-term adjustment. First, I consider evidence regarding how divorce relates to children's externalizing behaviors, internalizing problems, academic achievement, and social relationships. Second, I examine timing of the divorce, demographic characteristics, children's adjustment prior to the divorce, and stigmatization as moderators of the links between divorce and children's adjustment. Third, I examine income, interparental conflict, parenting, and parents well-being as mediators of relations between divorce and children's adjustment. Fourth, I note the caveats and limitations of the research literature. Finally, I consider notable policies related to grounds for divorce, child support, and child custody in light of how they might affect children s adjustment to their parents divorce. © 2009 Association for Psychological Science.

Technical attainment, practical success and practical knowledge: hermeneutical bases for child nursing care.

Science.gov (United States)

de Mello, Débora Falleiros; de Lima, Regina Aparecida Garcia

2009-01-01

This reflective study aimed to present some aspects of the concepts technical attainment, practical success and practical knowledge, with a view to a broader understanding of child nursing care. Health care is considered in the perspective of reconstructive practices, characterized as contingencies, highlighting the importance of the connection between technical attainment and practical success and the valuation of practical knowledge, based on philosophical hermeneutics, in the context of practical philosophy. Child health nursing can deal with technical attainment and practical success jointly, and also understand practical knowledge in the longitudinality of care. Health promotion, disease prevention, recovery and rehabilitation of child health should be indissociably associated with contextualized realities, shared between professionals and families, aiming to follow the child's growth and development, produce narratives, identify experiences, choices and decision making to broaden health care.

Technical activity profile and influence of body anthropometry on playing performance in female elite team handball

DEFF Research Database (Denmark)

Michalsik, Lars B; Aagaard, Per; Madsen, Klavs

2015-01-01

regular tournament match seasons. Technical match activities were distributed in 6 major types of playing actions (shots, breakthroughs, fast breaks, technical errors, defensive errors, and tackles) and further divided into various subcategories (e.g., type of shot, hard or light tackles, claspings......, screenings, and blockings). Furthermore, anthropometric measurements were performed. Each player had 28.3 ± 11.0 (group means ± SD) high-intense playing actions per match with a total effective playing time of 50.70 ± 5.83 minutes. On average, each player made 2.8 ± 2.6 fast breaks, gave 7.9 ± 14...... that female elite TH players during competitive games intermittently perform a high number of short-term, high-intense technical playing actions making modern female elite TH a physically demanding team sport. No sign of technical fatigue were observed, since the amount of intense technical playing actions...

Technical and scale efficiency in public and private Irish nursing homes - a bootstrap DEA approach.

Science.gov (United States)

Ni Luasa, Shiovan; Dineen, Declan; Zieba, Marta

2016-10-27

This article provides methodological and empirical insights into the estimation of technical efficiency in the nursing home sector. Focusing on long-stay care and using primary data, we examine technical and scale efficiency in 39 public and 73 private Irish nursing homes by applying an input-oriented data envelopment analysis (DEA). We employ robust bootstrap methods to validate our nonparametric DEA scores and to integrate the effects of potential determinants in estimating the efficiencies. Both the homogenous and two-stage double bootstrap procedures are used to obtain confidence intervals for the bias-corrected DEA scores. Importantly, the application of the double bootstrap approach affords true DEA technical efficiency scores after adjusting for the effects of ownership, size, case-mix, and other determinants such as location, and quality. Based on our DEA results for variable returns to scale technology, the average technical efficiency score is 62 %, and the mean scale efficiency is 88 %, with nearly all units operating on the increasing returns to scale part of the production frontier. Moreover, based on the double bootstrap results, Irish nursing homes are less technically efficient, and more scale efficient than the conventional DEA estimates suggest. Regarding the efficiency determinants, in terms of ownership, we find that private facilities are less efficient than the public units. Furthermore, the size of the nursing home has a positive effect, and this reinforces our finding that Irish homes produce at increasing returns to scale. Also, notably, we find that a tendency towards quality improvements can lead to poorer technical efficiency performance.

Self-adjusting entropy-stable scheme for compressible Euler equations

Institute of Scientific and Technical Information of China (English)

程晓晗; 聂玉峰; 封建湖; LuoXiao-Yu; 蔡力

2015-01-01

In this work, a self-adjusting entropy-stable scheme is proposed for solving compressible Euler equations. The entropy-stable scheme is constructed by combining the entropy conservative flux with a suitable diffusion operator. The entropy has to be preserved in smooth solutions and be dissipated at shocks. To achieve this, a switch function, based on entropy variables, is employed to make the numerical diffusion term added around discontinuities automatically. The resulting scheme is still entropy-stable. A number of numerical experiments illustrating the robustness and accuracy of the scheme are presented. From these numerical results, we observe a remarkable gain in accuracy.

Exploring the Misrepresentation of Nigerian Women in Technical and Vocational Education in Polytechnic Institution

Directory of Open Access Journals (Sweden)

Robert Akor

2014-10-01

Full Text Available Nigerian government is making frantic efforts to drive her economy by laying emphasis on technical and vocational education to enable her compete favorably in the global market. Emphasis of government is in Polytechnic education where skills for self-reliant and economic growth are a priority. However, women are not embracing this opportunity by participating in the program that will equip them with skills and contribute to national development. In all 14 female participants were purposefully selected from Polytechnic. Phenomenological methodology was adopted and data collected were transcribed and analyzed. Results from the study include math/science phobia, perceived social support, and contextual roles among reasons for misrepresentation of women in technical and vocational education. Unless women have increased access to technical and vocational education in order to build diverse technical skills their vulnerability to unemployment and poverty will be on the rise. The findings of this study will guide stakeholders to develop a framework for improving the enrollment of women in this field. Keywords: women, technical and vocational education, self-reliant and unemployment

To Infinity and Beyond – Are Innovation Contests at Austrian Technical Colleges the Right Tool to Stimulate the Creative and Technical Potential of the Country?

Directory of Open Access Journals (Sweden)

Axel Zafoschnig

2013-01-01

Full Text Available Nowadays, creativity as it is applied for finding new technologies and making new inventions, is characterised by new unorthodox aspects of and approaches to problem solving. At the same time, innovation uses new scientific, technical and cultural elements to sustainably change the social structure of society. However, creative and innovative ideas are not affluent or ever-lasting resources. They need to be stimulated, elicited and put into realisation. This has to be done through expensive research and development cam-paigns, but may also be achieved at a lower level, namely, for example, at Austrian Technical Colleges. There, students are often encouraged to submit their diploma thesis projects in national and regional competitions and have recently proved to be very successful.

Legitimizing Technical Communication in English Departments: Carolyn Miller's "Humanistic Rationale for Technical Writing"

Science.gov (United States)

Moore, Patrick

2006-01-01

Carolyn Miller's oft-cited "Humanistic Rationale for Technical Writing," published in 1979, tries to give technical communication faculty more cultural capital in English departments controlled by literature professors. Miller replaces a positivistic emphasis in technical communication pedagogy with rhetoric. She shows how technical knowledge is…

Strategy of technical innovation

International Nuclear Information System (INIS)

Lee, Ga Jong

1990-12-01

This book deals with policy of scientific technique and technical innovation such as research for development and types of technical innovation, historical development and process of technical innovation, economic growth, technology change and investment for research and development, structure and form of technical transfer with the meaning process, from, structure and theory, economic growth and investment of research and development with experiential analysis and case study on strategy of technical innovation in electron and fine chemical industry.

Application of ordinary kriging for interpolation of micro-structured technical surfaces

International Nuclear Information System (INIS)

Raid, Indek; Kusnezowa, Tatjana; Seewig, Jörg

2013-01-01

Kriging is an interpolation technique used in geostatistics. In this paper we present kriging applied in the field of three-dimensional optical surface metrology. Technical surfaces are not always optically cooperative, meaning that measurements of technical surfaces contain invalid data points because of different effects. These data points need to be interpolated to obtain a complete area in order to fulfil further processing. We present an elementary type of kriging, known as ordinary kriging, and apply it to interpolate measurements of different technical surfaces containing different kinds of realistic defects. The result of the interpolation with kriging is compared to six common interpolation techniques: nearest neighbour, natural neighbour, inverse distance to a power, triangulation with linear interpolation, modified Shepard's method and radial basis function. In order to quantify the results of different interpolations, the topographies are compared to defect-free reference topographies. Kriging is derived from a stochastic model that suggests providing an unbiased, linear estimation with a minimized error variance. The estimation with kriging is based on a preceding statistical analysis of the spatial structure of the surface. This comprises the choice and adaptation of specific models of spatial continuity. In contrast to common methods, kriging furthermore considers specific anisotropy in the data and adopts the interpolation accordingly. The gained benefit requires some additional effort in preparation and makes the overall estimation more time-consuming than common methods. However, the adaptation to the data makes this method very flexible and accurate. (paper)

Urology technical and non-technical skills development: the emerging role of simulation.

Science.gov (United States)

Rashid, Prem; Gianduzzo, Troy R J

2016-04-01

To review the emerging role of technical and non-technical simulation in urological education and training. A review was conducted to examine the current role of simulation in urology training. A PUBMED search of the terms 'urology training', 'urology simulation' and 'urology education' revealed 11,504 titles. Three hundred and fifty-seven abstracts were identified as English language, peer reviewed papers pertaining to the role of simulation in urology and related topics. Key papers were used to explore themes. Some cross-referenced papers were also included. There is an ongoing need to ensure that training time is efficiently utilised while ensuring that optimal technical and non-technical skills are achieved. Changing working conditions and the need to minimise patient harm by inadvertent errors must be taken into account. Simulation models for specific technical aspects have been the mainstay of graduated step-wise low and high fidelity training. Whole scenario environments as well as non-technical aspects can be slowly incorporated into the curriculum. Doing so should also help define what have been challenging competencies to teach and evaluate. Dedicated time, resources and trainer up-skilling are important. Concurrent studies are needed to help evaluate the effectiveness of introducing step-wise simulation for technical and non-technical competencies. Simulation based learning remains the best avenue of progressing surgical education. Technical and non-technical simulation could be used in the selection process. There are good economic, logistic and safety reasons to pursue the process of ongoing development of simulation co-curricula. While the role of simulation is assured, its progress will depend on a structured program that takes advantage of what can be delivered via this medium. Overall, simulation can be developed further for urological training programs to encompass technical and non-technical skill development at all stages, including

ERCIM technical reference digital library. Joint Ercim Action

OpenAIRE

Biagioni, Stefania

1998-01-01

New technologies, especially the Internet and WWW, are radically changing the roles of content providers and content consumers with respect to multimedia on-line services. For this reason, ERCIM has decided to set up an experimental system to link collections of technical reports and other types of grey literature of the ERCIM member research centres and labs on-line. The aim of this service is to assist ERCIM scientists to make their research results immediately available world-wide and prov...

The Future Cybersecurity Workforce: Going Beyond Technical Skills for Successful Cyber Performance

Directory of Open Access Journals (Sweden)

Jessica Dawson

2018-06-01

Full Text Available One of the challenges in writing an article reviewing the current state of cyber education and workforce development is that there is a paucity of quantitative assessment regarding the cognitive aptitudes, work roles, or team organization required by cybersecurity professionals to be successful. In this review, we argue that the people who operate within the cyber domain need a combination of technical skills, domain specific knowledge, and social intelligence to be successful. They, like the networks they operate, must also be reliable, trustworthy, and resilient. Defining the knowledge, skills, attributes, and other characteristics is not as simple as defining a group of technical skills that people can be trained on; the complexity of the cyber domain makes this a unique challenge. There has been little research devoted to exactly what attributes individuals in the cyber domain need. What research does exist places an emphasis on technical and engineering skills while discounting the important social and organizational influences that dictate success or failure in everyday settings. This paper reviews the literature on cyber expertise and cyber workforce development to identify gaps and then argues for the important contribution of social fit in the highly complex and heterogenous cyber workforce. We then identify six assumptions for the future of cybersecurity workforce development, including the requirement for systemic thinkers, team players, a love for continued learning, strong communication ability, a sense of civic duty, and a blend of technical and social skill. Finally, we make recommendations for social and cognitive metrics which may be indicative of future performance in cyber work roles to provide a roadmap for future scholars.

The Future Cybersecurity Workforce: Going Beyond Technical Skills for Successful Cyber Performance.

Science.gov (United States)

Dawson, Jessica; Thomson, Robert

2018-01-01

One of the challenges in writing an article reviewing the current state of cyber education and workforce development is that there is a paucity of quantitative assessment regarding the cognitive aptitudes, work roles, or team organization required by cybersecurity professionals to be successful. In this review, we argue that the people who operate within the cyber domain need a combination of technical skills, domain specific knowledge, and social intelligence to be successful. They, like the networks they operate, must also be reliable, trustworthy, and resilient. Defining the knowledge, skills, attributes, and other characteristics is not as simple as defining a group of technical skills that people can be trained on; the complexity of the cyber domain makes this a unique challenge. There has been little research devoted to exactly what attributes individuals in the cyber domain need. What research does exist places an emphasis on technical and engineering skills while discounting the important social and organizational influences that dictate success or failure in everyday settings. This paper reviews the literature on cyber expertise and cyber workforce development to identify gaps and then argues for the important contribution of social fit in the highly complex and heterogenous cyber workforce. We then identify six assumptions for the future of cybersecurity workforce development, including the requirement for systemic thinkers, team players, a love for continued learning, strong communication ability, a sense of civic duty, and a blend of technical and social skill. Finally, we make recommendations for social and cognitive metrics which may be indicative of future performance in cyber work roles to provide a roadmap for future scholars.

ANALYSIS OF PERIODICAL TECHNICAL INSPECTION SYSTEMS IN AUTOMOTIVE TRANSPORT. THE EXPERIENCES OF POLAND AND RUSSIA

Directory of Open Access Journals (Sweden)

Jan FILIPCZYK

2015-12-01

Full Text Available The increasing number of road accidents nowadays seems to by a global problem. Apart from the obvious causes of accidents, such as violation of road traffic rules by drivers and pedestrians, the drunk driving, poor quality of road infrastructure, the technical faults of vehicles should also be take into account. Reasons of technical failures can be the failure of parts, components and assemblies caused by aging, poor quality or non-observance of technological norms when they are installed. It is possible to prevent the occurrence of faults by applying warning methods, one of which is obligatory periodic technical inspection. The purpose of this article is to analyze the characteristic features of the systems of technical inspections in automotive transport used in Poland and Russia. It makes it possible to identify common features and distinctive features of systems in both countries.

Risk Analysis and Decision Making FY 2013 Milestone Report

Energy Technology Data Exchange (ETDEWEB)

Engel, David W.; Dalton, Angela C.; Dale, Crystal; Jones, Edward; Thompson, J.

2013-06-01

Risk analysis and decision making is one of the critical objectives of CCSI, which seeks to use information from science-based models with quantified uncertainty to inform decision makers who are making large capital investments. The goal of this task is to develop tools and capabilities to facilitate the development of risk models tailored for carbon capture technologies, quantify the uncertainty of model predictions, and estimate the technical and financial risks associated with the system. This effort aims to reduce costs by identifying smarter demonstrations, which could accelerate development and deployment of the technology by several years.

Adjustable collimator

International Nuclear Information System (INIS)

Carlson, R.W.; Covic, J.; Leininger, G.

1981-01-01

In a rotating fan beam tomographic scanner there is included an adjustable collimator and shutter assembly. The assembly includes a fan angle collimation cylinder having a plurality of different length slots through which the beam may pass for adjusting the fan angle of the beam. It also includes a beam thickness cylinder having a plurality of slots of different widths for adjusting the thickness of the beam. Further, some of the slots have filter materials mounted therein so that the operator may select from a plurality of filters. Also disclosed is a servo motor system which allows the operator to select the desired fan angle, beam thickness and filter from a remote location. An additional feature is a failsafe shutter assembly which includes a spring biased shutter cylinder mounted in the collimation cylinders. The servo motor control circuit checks several system conditions before the shutter is rendered openable. Further, the circuit cuts off the radiation if the shutter fails to open or close properly. A still further feature is a reference radiation intensity monitor which includes a tuning-fork shaped light conducting element having a scintillation crystal mounted on each tine. The monitor is placed adjacent the collimator between it and the source with the pair of crystals to either side of the fan beam

Technical and tactical skills related to performance levels in tennis: A systematic review.

Science.gov (United States)

Kolman, Nikki S; Kramer, Tamara; Elferink-Gemser, Marije T; Huijgen, Barbara C H; Visscher, Chris

2018-06-11

The aim of this systematic review is to provide an overview of outcome measures and instruments identified in the literature for examining technical and tactical skills in tennis related to performance levels. Such instruments can be used to identify talent or the specific skill development training needs of particular players. Searches for this review were conducted using the PubMed, Web of Science, and PsycInfo databases. Out of 733 publications identified through these searches, 40 articles were considered relevant and included in this study. They were divided into three categories: (1) technical skills, (2) tactical skills and (3) integrated technical and tactical skills. There was strong evidence that technical skills (ball velocity and to a lesser extent ball accuracy) and tactical skills (decision making, anticipation, tactical knowledge and visual search strategies) differed among players according to their performance levels. However, integrated measurement of these skills is required, because winning a point largely hinges on a tactical decision to perform a particular stroke (i.e., technical execution). Therefore, future research should focus on examining the relationship between these skills and tennis performance and on the development of integrated methods for measuring these skills.

A Case for Adjusting Subjectively Rated Scores in the Advanced Placement Tests. Program Statistics Research. Technical Report No. 94-5.

Science.gov (United States)

Longford, Nicholas T.

A case is presented for adjusting the scores for free response items in the Advanced Placement (AP) tests. Using information about the rating process from the reliability studies, administrations of the AP test for three subject areas, psychology, computer science, and English language and composition, are analyzed. In the reliability studies, 299…

Data monitoring system of technical diagnosis system for EAST

International Nuclear Information System (INIS)

Qian Jing; Weng Peide; Chen Zhuomin; Wu Yu; Xi Weibin; Luo Jiarong

2010-01-01

Technical diagnosis system (TDS) is an important subsystem to monitor status parameters of EAST (experimental advanced superconducting tokamak). The upgraded TDS data monitoring system is comprised of management floor, monitoring floor and field floor.. Security protection, malfunction record and analysis are designed to make the system stable, robust and friendly. During the past EAST campaigns, the data monitoring system has been operated reliably and stably. The signal conditioning system and software architecture are described. (authors)

An Effective Health and Medical Technical Authority

Science.gov (United States)

Fogarty, Jennifer A.

2009-01-01

The NASA Governance model directed the formation of three Technical Authorities, Engineering; Safety and Mission Assurance; and Health and Medical, to ensure that risks are identified and adjudicated efficiently and transparently in concert with the spaceflight programs and projects. The Health and Medical Technical Authority (HMTA) has been implemented at the Johnson Space Center (JSC) and consists of the Chief Medical Office (CMO), the Deputy CMO, and HMTA Delegates. The JSC HMTA achieves the goals of risk identification and adjudication through the discharge of the appropriate technical expertise to human space flight programs and projects and the escalation of issues within program and technical authority boards. The JSC HMTA relies on subject matter experts (SMEs) in the Space Life Sciences Directorate at JSC as well as experts from other Centers to work crew health and performance issues at the technical level, develop requirements, oversee implementation and validation of requirements, and identify risks and non-compliances. Once a risk or potential noncompliance has been identified and reported to the programs or projects, the JSC HMTA begins to track it and closely monitor the program's or project's response. As a risk is developed or a non-compliance negotiated, positions from various levels of decision makers are sought at the program and project control boards. The HMTA may support a program or project position if it is satisfied with the decision making and vetting processes (ex. the subject matter expert voiced his/her concerns and all dissenting opinions were documented) and finds that the position both acknowledges the risk and cost of the mitigation and resolves the issue without changing NASA risk posture. The HMTA may disagree with a program or project position if the NASA risk posture has been elevated or obfuscated. If the HMTA does disagree with the program or project position, it will appeal to successively higher levels of authority so that

Risk Aversion is Associated with Decision Making among Community-Based Older Persons.

Science.gov (United States)

Boyle, Patricia A; Yu, Lei; Buchman, Aron S; Bennett, David A

2012-01-01

Risk aversion is associated with many important decisions among younger and middle aged persons, but the association of risk aversion with decision making has not been well studied among older persons who face some of the most significant decisions of their lives. Using data from 606 community-dwelling older persons without dementia from the Rush Memory and Aging Project, an ongoing longitudinal epidemiologic study of aging, we examined the association of risk aversion with decision making. Risk aversion was measured using standard behavioral economics questions in which participants were asked to choose between a certain monetary payment ($15) versus a gamble in which they could gain more than $15 or gain nothing; potential gamble gains ranged from $20 to $300 with the gain amounts varied randomly over questions. Decision making was measured using a 12 item version of the Decision Making Competence Assessment Tool. In a linear regression model adjusted for age, sex, education, and income, greater risk aversion was associated with poorer decision making [estimate = -1.03, standard error (SE) = 0.35, p = 0.003]. Subsequent analyses showed that the association of risk aversion with decision making persisted after adjustment for global cognitive function as well as executive and non-executive cognitive abilities. Similar to findings from studies of younger persons, risk aversion is associated with poorer decision making among older persons who face a myriad of complex and influential decisions.

12 CFR 19.240 - Inflation adjustments.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Inflation adjustments. 19.240 Section 19.240... PROCEDURE Civil Money Penalty Inflation Adjustments § 19.240 Inflation adjustments. (a) The maximum amount... Civil Penalties Inflation Adjustment Act of 1990 (28 U.S.C. 2461 note) as follows: ER10NO08.001 (b) The...

Training of technical staff and technical staff managers

International Nuclear Information System (INIS)

Moody, G.F.

1991-01-01

The purpose of Technical Staff and Technical Staff Managers training is to provide job skills enhancement to individuals selected to fill key technical positions within a nuclear utility. This training is unique in that unlike other training programs accredited by the National Academy for Nuclear Training, it does not lead to specific task qualification. The problems encountered when determining the student population and curriculum are a direct result of this major difference. Major problems encountered are determining who should attend the training, what amount of training is necessary and sufficient, and how to obtain the best feedback in order to effect substantive program improvements. These topics will be explored and possible solutions discussed

Technical Network

CERN Multimedia

2007-01-01

In order to optimise the management of the Technical Network (TN), to facilitate understanding of the purpose of devices connected to the TN and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive e-mails from IT/CS asking them to add the corresponding information in the network database at "network-cern-ch". Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

75 FR 48564 - Navigation and Navigable Waters; Technical, Organizational, and Conforming Amendments, Sector...

Science.gov (United States)

2010-08-11

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Parts 3 and 165 [Docket No. USCG-2010-0351] RIN 1625-ZA25 Navigation and Navigable Waters; Technical, Organizational, and Conforming Amendments, Sector Columbia River, WA AGENCY: Coast Guard, DHS. ACTION: Final rule. SUMMARY: This rule makes non-substantive...

Technical opportunities to reduce global anthropogenic emissions of nitrous oxide

Science.gov (United States)

Winiwarter, Wilfried; Höglund-Isaksson, Lena; Klimont, Zbigniew; Schöpp, Wolfgang; Amann, Markus

2018-01-01

We describe a consistent framework developed to quantify current and future anthropogenic emissions of nitrous oxide and the available technical abatement options by source sector for 172 regions globally. About 65% of the current emissions derive from agricultural soils, 8% from waste, and 4% from the chemical industry. Low-cost abatement options are available in industry, wastewater, and agriculture, where they are limited to large industrial farms. We estimate that by 2030, emissions can be reduced by about 6% ±2% applying abatement options at a cost lower than 10 €/t CO2-eq. The largest abatement potential at higher marginal costs is available from agricultural soils, employing precision fertilizer application technology as well as chemical treatment of fertilizers to suppress conversion processes in soil (nitrification inhibitors). At marginal costs of up to 100 €/t CO2-eq, about 18% ±6% of baseline emissions can be removed and when considering all available options, the global abatement potential increases to about 26% ±9%. Due to expected future increase in activities driving nitrous oxide emissions, the limited technical abatement potential available means that even at full implementation of reduction measures by 2030, global emissions can be at most stabilized at the pre-2010 level. In order to achieve deeper reductions in emissions, considerable technological development will be required as well as non-technical options like adjusting human diets towards moderate animal protein consumption.

METHODOLOGY FOR ANALYSIS OF DECISION MAKING IN AIR NAVIGATION SYSTEM

Directory of Open Access Journals (Sweden)

Volodymyr Kharchenko

2011-03-01

Full Text Available Abstract. In the research of Air Navigation System as a complex socio-technical system the methodologyof analysis of human-operator's decision-making has been developed. The significance of individualpsychologicalfactors as well as the impact of socio-psychological factors on the professional activities of ahuman-operator during the flight situation development from normal to catastrophic were analyzed. On thebasis of the reflexive theory of bipolar choice the expected risks of decision-making by the Air NavigationSystem's operator influenced by external environment, previous experience and intentions were identified.The methods for analysis of decision-making by the human-operator of Air Navigation System usingstochastic networks have been developed.Keywords: Air Navigation System, bipolar choice, human operator, decision-making, expected risk, individualpsychologicalfactors, methodology of analysis, reflexive model, socio-psychological factors, stochastic network.

U.S. spent nuclear fuel management: Political, fiscal, and technical feasibility

International Nuclear Information System (INIS)

Singer, Clifford

2013-01-01

Successful U.S. spent nuclear fuel management policy must satisfy political, fiscal, and technical constraints. Technical requirements have been thoroughly investigated in the United States and Nordic countries for volcanic tuff, salt, and granite. Fiscal planning requires an inflation-adjusted revenue stream and predictable real interest rate earnings on fund balances. A prompt solution satisfying political constraints requires compromise between the overlapping but distinct goals of seven different sets of interests at the federal level. Absent such compromise, there will be delay until sufficient support for one of three strategies evolves: (1) force the Yucca Mountain repository on Nevada, (2) open a centralized storage facility without coupling to repository licensing, or (3) follow a “consent-based” process for repository licensing. Formulations of each of these strategies to overcome impediments to their success are described. - Highlights: • U.S. spent nuclear fuel policy has been at an impasse. • No compromise on Yucca Mountain is at hand. • Yucca only, new repository, or no repository are options. • Success with each is more likely with sounder financing

TECHNICAL COORDINATION

CERN Multimedia

A. Ball

2010-01-01

Operational Experience At the end of the first full-year running period of LHC, CMS is established as a reliable, robust and mature experiment. In particular common systems and infrastructure faults accounted for <0.6 % CMS downtime during LHC pp physics. Technical operation throughout the entire year was rather smooth, the main faults requiring UXC access being sub-detector power systems and rack-cooling turbines. All such problems were corrected during scheduled technical stops, in the shadow of tunnel access needed by the LHC, or in negotiated accesses or access extensions. Nevertheless, the number of necessary accesses to the UXC averaged more than one per week and the technical stops were inevitably packed with work packages, typically 30 being executed within a few days, placing a high load on the coordination and area management teams. It is an appropriate moment for CMS Technical Coordination to thank all those in many CERN departments and in the Collaboration, who were involved in CMS techni...

Coaching Non-technical Skills Improves Surgical Residents' Performance in a Simulated Operating Room.

Science.gov (United States)

Yule, Steven; Parker, Sarah Henrickson; Wilkinson, Jill; McKinley, Aileen; MacDonald, Jamie; Neill, Adrian; McAdam, Tim

2015-01-01

To investigate the effect of coaching on non-technical skills and performance during laparoscopic cholecystectomy in a simulated operating room (OR). Non-technical skills (situation awareness, decision making, teamwork, and leadership) underpin technical ability and are critical to the success of operations and the safety of patients in the OR. The rate of developing assessment tools in this area has outpaced development of workable interventions to improve non-technical skills in surgical training and beyond. A randomized trial was conducted with senior surgical residents (n = 16). Participants were randomized to receive either non-technical skills coaching (intervention) or to self-reflect (control) after each of 5 simulated operations. Coaching was based on the Non-Technical Skills For Surgeons (NOTSS) behavior observation system. Surgeon-coaches trained in this method coached participants in the intervention group for 10 minutes after each simulation. Primary outcome measure was non-technical skills, assessed from video by a surgeon using the NOTSS system. Secondary outcomes were time to call for help during bleeding, operative time, and path length of laparoscopic instruments. Non-technical skills improved in the intervention group from scenario 1 to scenario 5 compared with those in the control group (p = 0.04). The intervention group was faster to call for help when faced with unstoppable bleeding in the final scenario (no. 5; p = 0.03). Coaching improved residents' non-technical skills in the simulated OR compared with those in the control group. Important next steps are to implement non-technical skills coaching in the real OR and assess effect on clinically important process measures and patient outcomes. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Technical aspects and complications of laparoscopic banding for morbid obesity--a radiological perspective

Energy Technology Data Exchange (ETDEWEB)

Roy-Choudhury, S.H.; Nelson, W.M.; EI Cast, J.; Zacharoulis, D.; Kirkwood, B.; Sedman, P.C.; Royston, C.M.S.; Breen, D.J. E-mail: david.breen@suht.swest.nhs.uk

2004-03-01

Morbid obesity is a significant clinical problem in the western world. Various surgical restrictive procedures have been described as an aid to weight reduction when conservative treatments fail. Adjustable laparoscopic gastric banding (LAPBAND) has been popularized as an effective, safe, minimally invasive, yet reversible technique for the treatment of morbid obesity. Radiological input is necessary in the follow-up of these patients and the diagnosis of complications peculiar to this type of surgery. In this review we will highlight the technical aspects of radiological follow-up and the lessons learnt over the last 5 years.

Risk informed decision making - a pre-study

International Nuclear Information System (INIS)

Simola, K.; Pulkkinen, U.

2004-04-01

Examples of risk-informed decisions are establishing maintenance programmes, optimising inspection policies and justifying plant modifications, and revising technical specifications. Applications in daily situations can be such as accepting or rejecting exemptions from technical specifications. The aim of this pre-study was to identify the status of risk-informed decision making at Swedish and Finnish nuclear power plants and nuclear safety authorities. Responses to a questionnaire were obtained either by interviews or by e-mail from two Swedish and two Finnish NPPs, SKI and STUK. The development of a risk-informed decision procedure based on decision analytic ideas is worth recommending. A clear documentation format is a part of such procedure. In order to serve as a basis for final decision, the documentation should include clearly defined decision criteria, qualification of PSA model for the issue under analysis, description of most important uncertainties and assumptions. (au)

Could LC-NE-Dependent Adjustment of Neural Gain Drive Functional Brain Network Reorganization?

Directory of Open Access Journals (Sweden)

Carole Guedj

2017-01-01

Full Text Available The locus coeruleus-norepinephrine (LC-NE system is thought to act at synaptic, cellular, microcircuit, and network levels to facilitate cognitive functions through at least two different processes, not mutually exclusive. Accordingly, as a reset signal, the LC-NE system could trigger brain network reorganizations in response to salient information in the environment and/or adjust the neural gain within its target regions to optimize behavioral responses. Here, we provide evidence of the co-occurrence of these two mechanisms at the whole-brain level, in resting-state conditions following a pharmacological stimulation of the LC-NE system. We propose that these two mechanisms are interdependent such that the LC-NE-dependent adjustment of the neural gain inferred from the clustering coefficient could drive functional brain network reorganizations through coherence in the gamma rhythm. Via the temporal dynamic of gamma-range band-limited power, the release of NE could adjust the neural gain, promoting interactions only within the neuronal populations whose amplitude envelopes are correlated, thus making it possible to reorganize neuronal ensembles, functional networks, and ultimately, behavioral responses. Thus, our proposal offers a unified framework integrating the putative influence of the LC-NE system on both local- and long-range adjustments of brain dynamics underlying behavioral flexibility.

Personality and Health Care Decision-Making Style

OpenAIRE

Kathryn E. Flynn; Maureen A. Smith

2007-01-01

Using the Wisconsin Longitudinal Study Graduate Survey (N = 5,830), a population-based cohort of older adults (most aged 63–66 years), we explored relationships between five factors of personality and four preference types that account for multiple components of the health care decision-making process (information exchange, deliberation, and selection of treatment choice). After adjustment for personal, health, social, and economic factors, we found that increased conscientiousness and openne...

Making sustainability work

International Nuclear Information System (INIS)

Binswanger, Hans Christoph

1998-01-01

Today's economic theory usually neglects the role of nature and environment. To make sustainability work it is, however, essential to (re-)integrate nature into the standard concepts of economics, especially by incorporating natural factors into the production function. It must be acknowledged that economic growth is not (only) the result of technical change but is mainly caused by rising energy-inputs into the economy, and that this is necessarily followed by resource exhaustion and pollution. Therefore, nature must not only be taken into account as a central factor of production but also in the form of environmental quality which is the basis for human quality of life. A numeric example shows that a small, but steady decrease of yearly resource consumption is already apt to redirect the economy on a path of sustainable development

Constructionist Gaming: Understanding the Benefits of Making Games for Learning

Science.gov (United States)

Kafai, Yasmin B.; Burke, Quinn

2015-01-01

There has been considerable interest in examining the educational potential of playing video games. One crucial element, however, has traditionally been left out of these discussions—namely, children's learning through making their own games. In this article, we review and synthesize 55 studies from the last decade on making games and learning. We found that the majority of studies focused on teaching coding and academic content through game making, and that few studies explicitly examined the roles of collaboration and identity in the game making process. We argue that future discussions of serious gaming ought to be more inclusive of constructionist approaches to realize the full potential of serious gaming. Making games, we contend, not only more genuinely introduces children to a range of technical skills but also better connects them to each other, addressing the persistent issues of access and diversity present in traditional digital gaming cultures. PMID:27019536

Birth-Order Complementarity and Marital Adjustment.

Science.gov (United States)

Vos, Cornelia J. Vanderkooy; Hayden, Delbert J.

1985-01-01

Tested the influence of birth-order complementarity on marital adjustment among 327 married women using the Spanier Dyadic Adjustment Scale (1976). Birth-order complementarity was found to be unassociated with marital adjustment. (Author/BL)

The academic adjustment scale : Measuring the adjustment of permanent resident or sojourner students

NARCIS (Netherlands)

Anderson, Joel R.; Guan, Yao; Koc, Yasin

In this paper we developed and validated the Academic Adjustment Scale (AAS) - a new scale for measuring academic adjustment, which was developed with a focus on student sojourners who temporarily relocate to a new culture for the purpose of tertiary education, but also is validated for use with

Models of traumatic experiences and children's psychological adjustment: the roles of perceived parenting and the children's own resources and activity.

Science.gov (United States)

Punamäki, R L; Qouta, S; el Sarraj, E

1997-08-01

The relations between traumatic events, perceived parenting styles, children's resources, political activity, and psychological adjustment were examined among 108 Palestinian boys and girls of 11-12 years of age. The results showed that exposure to traumatic events increased psychological adjustment problems directly and via 2 mediating paths. First, the more traumatic events children had experienced, the more negative parenting they experienced. And, the poorer they perceived parenting, the more they suffered from high neuroticism and low self-esteem. Second, the more traumatic events children had experienced, the more political activity they showed, and the more active they were, the more they suffered from psychological adjustment problems. Good perceived parenting protected children's psychological adjustment by making them less vulnerable in two ways. First, traumatic events decreased their intellectual, creative, and cognitive resources, and a lack of resources predicted many psychological adjustment problems in a model excluding perceived parenting. Second, political activity increased psychological adjustment problems in the same model, but not in the model including good parenting.

CLARIFY (Trademark): An On-Line Guide for Revising Technical Prose,

Science.gov (United States)

1983-11-01

it appears that writers nominalize in an unconscious attempt to make their prose sound significant. Sociolinguistic studies consistently show that...technical information more effectively than a varied mix of long and short sentences. And there are no empirical studies to suggest that varied sentence...earlier studies , especially those that contrast memory and comprehension - 18 - topic" and "agent." New instance,;--that is, elements of new sentences

Technical and Scientific Support Organizations Providing Support to Regulatory Functions. Companion CD-ROM

International Nuclear Information System (INIS)

2018-01-01

This publication introduces the general principles underlying the provision of technical and scientific support to a regulatory body and the characteristics of organizations providing such support. It describes the services provided to support regulatory functions as well as the associated activities and processes to maintain the needed level of expertise, state of the art tools and equipment. The publication is intended for use primarily by organizations that provide technical and scientific support in the field of nuclear and radiation safety. This also includes organizations that acquire such support, and regulatory bodies and governments, as they make decisions on the model of technical and scientific support to be developed at the national level, for example in the case of a country embarking on the development of a nuclear power programme. It is the first IAEA publication dedicated to the specific practices and challenges to be met by the technical and scientific support organizations. This CD-ROM includes the annexes to the printed publication of examples of TSOs and their interactions with key stakeholders.

Technical on the TAB of air handling system in IMEF facility

International Nuclear Information System (INIS)

Oh, Yon Woo; Baik, S. Y.; Kim, S. D.; Lee, B. J.

2002-08-01

A T.A.B(Testing, Adjusting and Balancing) technique, the basic technique of air handling facility, is one of the essential technical items which workers in charge of operation of facilities have to acquire. Especially, through scientific and reasonable inspective procedures, the reduction of energy and guarantee of designed skill have become influential important problems in our time rather than in the past days. Entrepreneurs have required more thorough verify of performances and procedure of test in order to raise the investment efficiency and reduce expenditure. For that reason, I hope that cooperator acquire objective and substantial knowledges about air handling facility so that they are helped from them

Performance of technical trading rules: evidence from Southeast Asian stock markets.

Science.gov (United States)

Tharavanij, Piyapas; Siraprapasiri, Vasan; Rajchamaha, Kittichai

2015-01-01

This paper examines the profitability of technical trading rules in the five Southeast Asian stock markets. The data cover a period of 14 years from January 2000 to December 2013. The instruments investigated are five Southeast Asian stock market indices: SET index (Thailand), FTSE Bursa Malaysia KLC index (Malaysia), FTSE Straits Times index (Singapore), JSX Composite index (Indonesia), and PSE composite index (the Philippines). Trading strategies investigated include Relative Strength Index, Stochastic oscillator, Moving Average Convergence-Divergence, Directional Movement Indicator and On Balance Volume. Performances are compared to a simple Buy-and-Hold. Statistical tests are also performed. Our empirical results show a strong performance of technical trading rules in an emerging stock market of Thailand but not in a more mature stock market of Singapore. The technical trading rules also generate statistical significant returns in the Malaysian, Indonesian and the Philippine markets. However, after taking transaction costs into account, most technical trading rules do not generate net returns. This fact suggests different levels of market efficiency among Southeast Asian stock markets. This paper finds three new insights. Firstly, technical indicators does not help much in terms of market timing. Basically, traders cannot expect to buy at a relative low price and sell at a relative high price by just using technical trading rules. Secondly, technical trading rules can be beneficial to individual investors as they help them to counter the behavioral bias called disposition effects which is the tendency to sell winning stocks too soon and holding on to losing stocks too long. Thirdly, even profitable strategies could not reliably predict subsequent market directions. They make money from having a higher average profit from profitable trades than an average loss from unprofitable ones.

Comparison of clinical probability-adjusted D-dimer and age-adjusted D-dimer interpretation to exclude venous thromboembolism.

Science.gov (United States)

Takach Lapner, Sarah; Julian, Jim A; Linkins, Lori-Ann; Bates, Shannon; Kearon, Clive

2017-10-05

Two new strategies for interpreting D-dimer results have been proposed: i) using a progressively higher D-dimer threshold with increasing age (age-adjusted strategy) and ii) using a D-dimer threshold in patients with low clinical probability that is twice the threshold used in patients with moderate clinical probability (clinical probability-adjusted strategy). Our objective was to compare the diagnostic accuracy of age-adjusted and clinical probability-adjusted D-dimer interpretation in patients with a low or moderate clinical probability of venous thromboembolism (VTE). We performed a retrospective analysis of clinical data and blood samples from two prospective studies. We compared the negative predictive value (NPV) for VTE, and the proportion of patients with a negative D-dimer result, using two D-dimer interpretation strategies: the age-adjusted strategy, which uses a progressively higher D-dimer threshold with increasing age over 50 years (age in years × 10 µg/L FEU); and the clinical probability-adjusted strategy which uses a D-dimer threshold of 1000 µg/L FEU in patients with low clinical probability and 500 µg/L FEU in patients with moderate clinical probability. A total of 1649 outpatients with low or moderate clinical probability for a first suspected deep vein thrombosis or pulmonary embolism were included. The NPV of both the clinical probability-adjusted strategy (99.7 %) and the age-adjusted strategy (99.6 %) were similar. However, the proportion of patients with a negative result was greater with the clinical probability-adjusted strategy (56.1 % vs, 50.9 %; difference 5.2 %; 95 % CI 3.5 % to 6.8 %). These findings suggest that clinical probability-adjusted D-dimer interpretation is a better way of interpreting D-dimer results compared to age-adjusted interpretation.

Handbook of Technical Communication

OpenAIRE

Mehler , Alexander; Romary , Laurent; Gibbon , Dafydd

2012-01-01

International audience; The handbook "Technical Communication" brings together a variety of topics which range from the role of technical media in human communication to the linguistic, multimodal enhancement of present-day technologies. It covers the area of computer-mediated text, voice and multimedia communication as well as of technical documentation. In doing so, the handbook takes professional and private communication into account. Special emphasis is put on technical communication bas...

Using the solar energy by technical photosynthesis

International Nuclear Information System (INIS)

Radebold, R.

1975-01-01

A system is decribed which makes it possible to copy some of the basic features of photosynthesis with technical means which are available to-day. Hydrazine and hydrogen peroxide are used as energy carrier, whereby hydrazine acts a propellant and hydrogen peroxide as oxidator. The synthesis of the two media is based on nitrogen and water which can, in principle, be taken from the air; nitrogen and water are also the products of the reactions. Liquid alcali metals are the donators of electrons for the synthesis which occurs, as in nature, by the intermediate action of electric energy. (orig.) [de

Expressive/Exploratory Technical Writing (XTW) in Engineering: Shifting the Technical Writing Curriculum

Science.gov (United States)

Warnock, Scott; Kahn, Michael

2007-01-01

While the importance of "expressive writing," or informal, self-directed writing, has been well established, teachers underutilize it, particularly in technical writing courses. We introduce the term expressive/exploratory technical writing (XTW), which is the use of informal, self-directed writing to problem-solve in technical fields. We describe…

The use of Quality-Adjusted Life Years in cost-effectiveness analyses in palliative care: Mapping the debate through an integrative review.

Science.gov (United States)

Wichmann, Anne B; Adang, Eddy Mm; Stalmeier, Peep Fm; Kristanti, Sinta; Van den Block, Lieve; Vernooij-Dassen, Myrra Jfj; Engels, Yvonne

2017-04-01

In cost-effectiveness analyses in healthcare, Quality-Adjusted Life Years are often used as outcome measure of effectiveness. However, there is an ongoing debate concerning the appropriateness of its use for decision-making in palliative care. To systematically map pros and cons of using the Quality-Adjusted Life Year to inform decisions on resource allocation among palliative care interventions, as brought forward in the debate, and to discuss the Quality-Adjusted Life Year's value for palliative care. The integrative review method of Whittemore and Knafl was followed. Theoretical arguments and empirical findings were mapped. A literature search was conducted in PubMed, EMBASE, and CINAHL, in which MeSH (Medical Subject Headings) terms were Palliative Care, Cost-Benefit Analysis, Quality of Life, and Quality-Adjusted Life Years. Three themes regarding the pros and cons were identified: (1) restrictions in life years gained, (2) conceptualization of quality of life and its measurement, including suggestions to adapt this, and (3) valuation and additivity of time, referring to changing valuation of time. The debate is recognized in empirical studies, but alternatives not yet applied. The Quality-Adjusted Life Year might be more valuable for palliative care if specific issues are taken into account. Despite restrictions in life years gained, Quality-Adjusted Life Years can be achieved in palliative care. However, in measuring quality of life, we recommend to-in addition to the EQ-5D- make use of quality of life or capability instruments specifically for palliative care. Also, we suggest exploring the possibility of integrating valuation of time in a non-linear way in the Quality-Adjusted Life Year.

Self-adjusting entropy-stable scheme for compressible Euler equations

International Nuclear Information System (INIS)

Cheng Xiao-Han; Nie Yu-Feng; Cai Li; Feng Jian-Hu; Luo Xiao-Yu

2015-01-01

In this work, a self-adjusting entropy-stable scheme is proposed for solving compressible Euler equations. The entropy-stable scheme is constructed by combining the entropy conservative flux with a suitable diffusion operator. The entropy has to be preserved in smooth solutions and be dissipated at shocks. To achieve this, a switch function, which is based on entropy variables, is employed to make the numerical diffusion term be automatically added around discontinuities. The resulting scheme is still entropy-stable. A number of numerical experiments illustrating the robustness and accuracy of the scheme are presented. From these numerical results, we observe a remarkable gain in accuracy. (paper)

论技术决策的伦理参与模式%Discussion on the ethical model of technology decision-making

Institute of Scientific and Technical Information of China (English)

高杨帆

2012-01-01

现代社会的许多风险是由于技术决策过程中伦理缺位所引起的。把伦理思想融入技术决策过程是当代技术面临的重大课题。尽管人们的技术决策总是有意或者无意受到某种伦理的指引,但有意识地在技术决策中植入伦理则至少有三种伦理模式,即价值观模式、功利主义模式和道义主义模式。它们因侧重点不同而适应于不同层次的技术决策,没有一种模式能普遍适用所有的技术决策,但选择一种最合适的伦理模式则是必要的,也是可行的。对于大型技术决策,则必须采取基于上述三种伦理模式的综合模式。%Many risks in modern society are due to the lack of ethic joining during the prohess of technical decision-making. How to embody he ethical thought into the technology decision-making process is a major issue faced by the contemporary technology. Despite the technical deci- sion making always is influenced intentionally or accidentally by certain ethical guidelines, but consciously implanting ethics in technology deci- sion-making has at least three ethical pattern, namely model of values, model of utilitarianism and model of deontology. They are different and are suitable for different levels of technical decision-making, not one model can be generally applicable to all technical decision-making, but to choose an appropriate ethical model is necessary and feasible. For oversized technical decision-making, taken on these three kinds of ethical model integrated model is necessary.

Making the Good Even Better: Feedback from easyCBM Focus Groups, School Year 2009/2010. Technical Report # 1001

Science.gov (United States)

Alonzo, Julie; Tindal, Gerald; Lai, Cheng-Fei

2010-01-01

This technical report provides a summary of feedback from teachers, administrators, and support personnel who used the easyCBM progress monitoring and benchmark assessment system during school year 2009/2010. Data were gathered from semi-structured focus groups conducted during the 2010 easyCBM August Institute at the University of Oregon. Results…

Input of Lithuanian science into nuclear safety improvement, coordination of technical support organizations

International Nuclear Information System (INIS)

Maksimovas, G.

1999-01-01

VATESI in its activities is very much supported by Lithuanian scientific and technical organizations which are doing expertise of safety analyses of Ignalina NPP. Description of these organizations is presented. Broad international cooperation and assistance programs is underway helping Lithuanians scientific organizations to build own capacity in making nuclear safety research

Measurement and adjustment of dumb-bells for 9-cell TESLA cavity

International Nuclear Information System (INIS)

Xu Wencan; Quan Shengwen; Hao Jiankui; Jiang Tao; Zhang Baocheng; Zhao Kui

2008-01-01

Correct Dumb-bells are very important to make sure the right field flatness, frequency of TM010 mode and length of 9-cell TESLA cavity. The shape of the dumb-bells will be wrong due to deep drawing, machining and EB welding. Then, the dumb-bells should be adjusted after iris and stiffness welding according to the mechanical and microwave measurement. Peking University has set up facilities for measuring and correcting the dumb-bells. This paper discusses the method of measuring and correcting the dumb-bells. (authors)

Technical rules in law

Energy Technology Data Exchange (ETDEWEB)

Debelius, J

1978-08-01

An important source of knowledge for technical experts is the state of the art reflected by catalogues of technical rules. Technical rules may also achieve importance in law due to a legal transformation standard. Here, rigid and flexible reference are controversial with regard to their admissibility from the point of view of constitutional law. In case of a divergence from the generally accepted technical rules, it is assumed - refutably - that the necessary care had not been taken. Technical rules are one out of several sources of information; they have no normative effect. This may result in a duty of anyone applying them to review the state of technology himself.

Technical rules in law

International Nuclear Information System (INIS)

Debelius, J.

1978-01-01

An important source of knowledge for technical experts is the state of the art reflected by catalogues of technical rules. Technical rules may also achieve importance in law due to a legal transformation standard. Here, rigid and flexible reference are controversial with regard to their admissibility from the point of view of constitutional law. In case of a divergence from the generally accepted technical rules, it is assumed - refutably - that the necessary care had not been taken. Technical rules are one out of several sources of information; they have no normative effect. This may result in a duty of anyone applying them to review the state of technology himself. (orig.) [de

TECHNICAL COORDINATION

CERN Multimedia

A. Ball

2010-01-01

Operational Experience Since the closure of the detector in February, the technical operation of CMS has been quite smooth and reliable. Some minor interventions in UXC were required to cure failures of power supplies, fans, readout boards and rack cooling connections, but all these failures were repaired in scheduled technical stops or parasitically during access dedicated to fixing LHC technical problems. The only occasion when CMS had to request an access between fills was to search for the source of an alarm from the leak-detection cables mounted in the DT racks. After a few minutes of diagnostic search, a leaking air-purge was found. Replacement was complete within 2 hours. This incident demonstrated once more the value of these leak detection cables; the system will be further extended (during the end of year technical stop) to cover more racks in UXC and the floor beneath the detector. The magnet has also been operating reliably and reacted correctly to the 14s power cut on 29 May (see below). In or...

Strategy for assessing the technical, environmental, and engineering feasibility of subseabed disposal

International Nuclear Information System (INIS)

Anderson, D.R.; Boyer, D.G.; Herrmann, H.; Kelly, J.; Talbert, D.M.

1980-01-01

This paper presents the strategy and management techniques used in the development of the US Subseabed Disposal Program (SDP) for possible disposal of both high-level waste and spent fuel. These have been developed through joint efforts of the Department of Energy (DOE), Division of Waste Isolation, the Sandia Technical Program Manager, the Technical Program Coordinators, the Advisory Group, and the Principal Investigators. Three subsections of this paper address the various components which make up the SDP strategy and management techniques. The first section will summarize the US DOE high-level waste and spent fuel disposal program and the position that the SDP occupies within that program. The second section, the Subseabed Program Plan, addresses the technical and administrative tools which are employed to facilitate the day-to-day operation of the SDP. The third section addresses the current studies and future plans for addressing the legal, political, and international uncertainties that must be resolved prior to the time the SDP reaches the final engineering phases