WorldWideScience

Sample records for major turning point

  1. Virtual turning points

    Honda, Naofumi; Takei, Yoshitsugu

    2015-01-01

    The discovery of a virtual turning point truly is a breakthrough in WKB analysis of higher order differential equations. This monograph expounds the core part of its theory together with its application to the analysis of higher order Painlevé equations of the Noumi–Yamada type and to the analysis of non-adiabatic transition probability problems in three levels. As M.V. Fedoryuk once lamented, global asymptotic analysis of higher order differential equations had been thought to be impossible to construct. In 1982, however, H.L. Berk, W.M. Nevins, and K.V. Roberts published a remarkable paper in the Journal of Mathematical Physics indicating that the traditional Stokes geometry cannot globally describe the Stokes phenomena of solutions of higher order equations; a new Stokes curve is necessary.

  2. The Philosophy of Turning Points

    Turcan, Romeo V.

    2013-01-01

    business and management field, the turning point is seen as a valuable unit of analysis within the research field. It is expected that this paper will encourage a dynamic scholarly conversation about the concept of turning point and how it can aid international business researchers in the development...

  3. Turning points in reactor design

    Beckjord, E.S.

    1995-01-01

    This article provides some historical aspects on nuclear reactor design, beginning with PWR development for Naval Propulsion and the first commercial application at Yankee Rowe. Five turning points in reactor design and some safety problems associated with them are reviewed: (1) stability of Dresden-1, (2) ECCS, (3) PRA, (4) TMI-2, and (5) advanced passive LWR designs. While the emphasis is on the thermal-hydraulic aspects, the discussion is also about reactor systems

  4. Turning points in reactor design

    Beckjord, E.S.

    1995-09-01

    This article provides some historical aspects on nuclear reactor design, beginning with PWR development for Naval Propulsion and the first commercial application at Yankee Rowe. Five turning points in reactor design and some safety problems associated with them are reviewed: (1) stability of Dresden-1, (2) ECCS, (3) PRA, (4) TMI-2, and (5) advanced passive LWR designs. While the emphasis is on the thermal-hydraulic aspects, the discussion is also about reactor systems.

  5. Turning points in the history of mathematics

    Grant, Hardy

    2015-01-01

    This book explores some of the major turning points in the history of mathematics, ranging from ancient Greece to the present, demonstrating the drama that has often been a part of its evolution. Studying these breakthroughs, transitions, and revolutions, their stumbling-blocks and their triumphs, can help illuminate the importance of the history of mathematics for its teaching, learning, and appreciation. Some of the turning points considered are the rise of the axiomatic method (most famously in Euclid), and the subsequent major changes in it (for example, by David Hilbert); the “wedding,” via analytic geometry, of algebra and geometry; the “taming” of the infinitely small and the infinitely large; the passages from algebra to algebras, from geometry to geometries, and from arithmetic to arithmetics; and the revolutions in the late nineteenth and early twentieth centuries that resulted from Georg Cantor’s creation of transfinite set theory. The origin of each turning point is discussed, along with...

  6. Kantian Turning Point in Gadamer's Philosophical Hermeneutics

    Kristína Bosáková

    2016-11-01

    Full Text Available The paper is treating the theme of a Kantian turning-point in the philosophical hermeneutics of H.- G. Gadamer based on of the harmonic relationship between metaphysics and science in Kantian philosophy from the point of view of the philosophical hermeneutics of Gadamer. The philosophical work of Kant had such an influence on Gadamer that without exaggerating we can talk about the Kantian turning-point in Gadamerian hermeneutics. Grondin, a former student of Gadamer, is talking about Kantian turning-point on the field of aesthetics, but in reality Kantian turning-point means much more than a mere change in the reception of the concept of judgement. It is a discovery of harmonical relationship between the beauty and the moral, between the reason and the sensitivity, between the modern sciences and the metaphysical tradition in the Kantian philosophy, made by Gadamer. This is what we call the Kantian turning-point in Gadamerian hermeneutics.

  7. Nippon Cinema at the digital turning point

    Marek Bochniarz

    2014-01-01

    Full Text Available This article is a review of a book written by Mitsuyo Wada Marciano – Japanese Cinema in the Digital Age. The author of this book examines the recent developments in the Japanese film industry at the turning point in the development of digital technologies. The book seeks to overcome the western approach to the subject, reinterprets classic films and explores new trends in transnational Japanese cinema (the term was proposed by the author to explain the situation of Japanese films in the context of Asian countries.

  8. Scalets, wavelets and (complex) turning point quantization

    Handy, C. R.; Brooks, H. A.

    2001-05-01

    Despite the many successes of wavelet analysis in image and signal processing, the incorporation of continuous wavelet transform theory within quantum mechanics has lacked a compelling, first principles, motivating analytical framework, until now. For arbitrary one-dimensional rational fraction Hamiltonians, we develop a simple, unified formalism, which clearly underscores the complementary, and mutually interdependent, role played by moment quantization theory (i.e. via scalets, as defined herein) and wavelets. This analysis involves no approximation of the Hamiltonian within the (equivalent) wavelet space, and emphasizes the importance of (complex) multiple turning point contributions in the quantization process. We apply the method to three illustrative examples. These include the (double-well) quartic anharmonic oscillator potential problem, V(x) = Z2x2 + gx4, the quartic potential, V(x) = x4, and the very interesting and significant non-Hermitian potential V(x) = -(ix)3, recently studied by Bender and Boettcher.

  9. Regional air pollution at a turning point.

    Grennfelt, Peringe; Hov, Oystein

    2005-02-01

    The control of transboundary air pollution in Europe has been successful. Emissions of many key pollutants are decreasing and there are signs of improvements in damaged ecosystems. The strategies under development within the CAFE programme under the European Commission and the Convention on Long-range Transboundary Air Pollution (CLRTAP), aim to take regional air pollution control a large step further, in particular with respect to small particles. In this paper we highlight the new strategies but look primarily at socioeconomic trends and climate change feedbacks that may have a significant influence on the outcome of the strategies and which so far have not been considered. In particular, we point out the influence on air quality of increased summer temperatures in Europe and of increasing emissions including international shipping, outside of Europe. Taken together the further emissions reductions in Europe and the increasing background pollution, slowly cause a greying of the Northern Hemisphere troposphere rather than the traditional picture of dominant emissions in Europe and North America ('black') with much lower emission intensities elsewhere ('white'). A hemispheric approach to further combat air pollution will become necessary in Europe and elsewhere.

  10. The turning points of world history : financial and methodological interpretations

    Kukliński, Antoni (ed.); Pawłowski, Krzysztof (ed.); Swianiewicz, Jan (ed.)

    2012-01-01

    Volumes VI and VII of the REUPUS Series “The Atlantic Community. The Titanic of the XXI Century?” and “The Turning Points of World History” can be seen as twin volumes trying to find new empirical observations, new methodological approaches and new value judgements to face the enigma of the XXI Century. Those volumes try to present some new interpretations of one of the greatest turning points of human history which is the essential feature of our times... Volume VII is the ...

  11. A falling of the veils: turning points and momentous turning points in leadership and the creation of CSR

    Hemingway, C.; Starkey, Kenneth

    2017-01-01

    This article uses the life stories approach to leadership and leadership development. Using exploratory, qualitative data from a Forbes Global 2000 and FTSE 100 company, we discuss the role of the turning point (TP) as an important antecedent of leadership in corporate social responsibility. We argue that TPs are causally efficacious, linking them to the development of life narratives concerned with an evolving sense of personal identity. Using both a multi-disciplinary perspective and a mult...

  12. Wofford-Thornburgh: a turning point for health reform.

    Tokarski, C

    1992-01-01

    The November 5 special election in Pennsylvania pitting appointed Senator Harris Wofford against former U.S. Attorney General Richard Thornburgh was a turning point in the national debate over health reform. Under the glare of media spotlights, Wofford mounted a come-from-behind victory over the heavily favored Thornburgh by trumpeting "national health insurance." Since Wofford's victory, President Bush has rethought his previous indifference to health reform and promised to announce a comprehensive plan in January, more than a year ahead of schedule.

  13. Forecasting Macedonian Business Cycle Turning Points Using Qual Var Model

    Petrovska Magdalena

    2016-09-01

    Full Text Available This paper aims at assessing the usefulness of leading indicators in business cycle research and forecast. Initially we test the predictive power of the economic sentiment indicator (ESI within a static probit model as a leading indicator, commonly perceived to be able to provide a reliable summary of the current economic conditions. We further proceed analyzing how well an extended set of indicators performs in forecasting turning points of the Macedonian business cycle by employing the Qual VAR approach of Dueker (2005. In continuation, we evaluate the quality of the selected indicators in pseudo-out-of-sample context. The results show that the use of survey-based indicators as a complement to macroeconomic data work satisfactory well in capturing the business cycle developments in Macedonia.

  14. Understanding turning points in intimate partner violence: factors and circumstances leading women victims toward change.

    Chang, Judy C; Dado, Diane; Hawker, Lynn; Cluss, Patricia A; Buranosky, Raquel; Slagel, Leslie; McNeil, Melissa; Scholle, Sarah Hudson

    2010-02-01

    When counseling women experiencing intimate partner violence (IPV), healthcare providers can benefit from understanding the factors contributing to a women's motivation to change her situation. We wished to examine the various factors and situations associated with turning points and change seeking in the IPV situation. We performed qualitative analysis on data from 7 focus groups and 20 individual interviews with women (61 participants) with past and/or current histories of IPV. The turning points women identified fell into 5 major themes: (1) protecting others from the abuse/abuser; (2) increased severity/humiliation with abuse; (3) increased awareness of options/access to support and resources; (4) fatigue/recognition that the abuser was not going to change; and (5) partner betrayal/infidelity. Women experiencing IPV can identify specific factors and events constituting turning points or catalyst to change in their IPV situation. These turning points are dramatic shifts in beliefs and perceptions of themselves, their partners, and/or their situation that alter the women's willingness to tolerate the situation and motivate them to consider change. When counseling women experiencing IPV, health providers can incorporate understanding of turning points to motivate women to move forward in their process of changing their IPV situation.

  15. [Adult health problems and coping at life turning points].

    Lee, Sheuan; Lu, Ying-Chi; Yen, Wen-Jiuan; Lin, Shu-Chin

    2004-02-01

    At important life turning points, middle-aged adults face many physiological changes (e.g., aging, changes in hormone levels) and alterations in family structure (e.g., children growing up and leaving home). In addition to facing these changes and their impacts, adults must also take on challenges in terms of self-concept, body image, life goals, and life meaning. Illnesses that commonly occur during this life stage include menopausal depression, substance abuse, and anxiety. Traditional treatment models are medical-oriented, but curative effects are limited and hospital visits still occur at high frequencies, resulting in increased medical expenses and disruptions in family life. The authors review the current literature on curative models in this area, and discuss the potential of a combination of physical therapy, cognitive, and existential-humanistic therapy to improve patients' physical strength, self-concept, self-esteem, and self-confidence in an effort to overcome physio-psycho-social disorders and to increase vitality.

  16. The German energetic turning point: year n+2

    Cruciani, Michel

    2013-07-01

    This publication proposes an analysis of the evolution of the German energy sector, two years after the adoption of a new energy policy. It notably aims at identifying the consequences of this important turning point which was characterised by the decision to phase out nuclear while keeping on reducing energy consumption and greenhouse gas emissions, and developing renewable energies. In a first part, the author comments the objectives associated with the present evolution in terms of reducing the primary energy consumption, reducing raw electric power consumption, energy consumption in transports, CO_2 emissions, of increasing the share of renewable energies and power production from renewable sources, and of complying with European objectives. The second part discusses technical aspects of the development of power generation from renewable sources by addressing the following issues: prospective, grid extension and strengthening, intermittency management, industrial orientation. The third part addresses economic aspects of this development: promotion of electricity production from renewable sources, relationship between power generation from renewable sources and electricity price, public debate on electricity price, employment and economic benefits, financing the energy transition, and the European dimension. In conclusion, the author discusses whether the German energy shift is a model or a counter-example

  17. What can be seen beyond the turning points?

    Morita, Koji

    1997-01-01

    LNG markets in Asia has faced turning points in 1990s. There is sluggish growth of Japanese demand, rapid demand growth of Korea and Taiwan, and increase of dependency on the Middle East. Will these situation continue after 2000? In Japan, energy demand will grow steadily, and development of nuclear power stations will not proceed without difficulty. Considering the emission of carbon dioxide, LNG demand will expand more than the Government outlook of 68 ∼ 60 mil. tons in 2010. IEEJ (Institute of Energy Economics Japan) forecasts that it will come to 58 mil. tons in 2010, including 1 ∼ 2 mil. tons of indigenous production. Korea secured two LNG projects newly, Ras Laffan (Qatar) and Oman. Considering the secured volume, LNG consumption will continue to expand even after 2000. But thinking of the lesser population of 21 mil. and warm climate of Taiwan, the extent of LNG demand expansion may not be so large. Big unknown factors exist in Asia: China and India. Their large population can give a great influence on LNG market in Asia. Several gas-fired power projects by IPP are already being planned. According to the Indian Government, as annual production capacity of natural gas is limited, more than 40 bil. m 3 must be fulfilled by import in 2005. Some indicators of China, GDP, energy consumption and so on, are saying that Shanghai and some cities may have already prepared conditions to introduce LNG. They may begin to utilize LNG by taking surplus of existing LNG projects in the later half of 2000s. (LN)

  18. O turning point da grande reportagem multimídia

    Longhi, Raquel Ritter; Universidade Federal de Santa Catarina / Campus Reitor João David Ferreira Lima. Florianópolis, Santa Catarina. Brasil. CEP: 88049-900 Tel: (48) 3721.9000

    2015-01-01

    Este artigo analisa o estado da arte da grande reportagem multimídia no jornalismo online, atentando para um momento que se pode definir como “turning point”, ou ponto de virada desse tipo de formato noticioso. A partir de uma sistematização da evolução dos formatos expressivos multimidiáticos da notícia no jornalismo digital, o artigo identifica três momentos principais dessa trajetória: o slide-show noticioso, no início dos anos 2000; os especiais multimídia, de meados de 2000 a 2011 e a gr...

  19. EU ECONOMIC GOVERNANCE REFORM: ARE WE AT A TURNING POINT?

    Daniel Daianu

    2011-03-01

    Full Text Available The sovereign debt crisis is creating enormous anguish in the European Monetary Union (EMU. Not surprisingly, emergency measures continue to be used at a time when a sort of economic recovery seems to be underway. Against this background the European Council summit of last October considered a Task Force report with a telling name: "Strengthening economic governance in the EU". This document is to be examined in conjunction with the governance reform proposals issued by the European Commission at the end of September and related documents. For the depth of this financial crisis and the "Great Recession" have forced EU governments and EU institutions to take a hard look at the governance structure of the Union. But it would be wrong to say that this demarche is an attempt to explore a terra incognita. From the very beginning of the European Monetary Union (EMU there was some discomfort with its institutional underpinnings and there were misgivings regarding its optimality as a currency area. This explains why a train of thought underlines a political rationale, too, for the creation of the EMU. Likewise, criticism regarding the way regulation and supervision have been established in the Union is not of recent vintage. And insufficiencies of the Stability and Growth Pact (SGP, with almost all member states flouting its rules at various points in time, have been repeatedly pointed out. This said, however, the flaws of financial intermediation have been less tackled by policy-makers and central bankers for reasons which, partially, are to be found in a paradigm which has dominated economic thinking in recent decades. This paper focuses on roots of the huge strain in the EU (EMU and main policy issues ensuing from the current crisis. It also looks at the stake NMSs have in a reformed EU economic governance structure. The challenges for EU economic governance reform are to be seen from a broad perspective: the crisis of the financial intermediation

  20. 77 FR 4989 - Turning Point Solar LLC: Notice of Availability of an Environmental Assessment

    2012-02-01

    ... monocrystalline photovoltaic panels mounted on fixed solar racking equipment and the construction of access roads... DEPARTMENT OF AGRICULTURE Rural Utilities Service Turning Point Solar LLC: Notice of Availability... possible financial assistance for a proposal by Turning Point Solar LCC (TPS). The proposal consists of...

  1. The Lewisian turning point and international migration: the case of Japan.

    Watanabe, S

    1994-01-01

    "This article critically examines the Lewisian turning point [concerning the availability of unlimited manpower resources] in light of Japan's experience since the mid-1800s. Japan reached its Lewisian turning point around 1960. Contrary to the assumptions of the theory however, the findings for Japan indicate that political factors have been more determinative of the rate of migration than purely economic ones. Prior to its turning point in 1960, international relations, war and forced repatriation were the decisive factors. Recently, though the inflow of foreign workers to fill labor shortages has increased, so also has the outflow of Japanese to accompany direct foreign investment." excerpt

  2. Turning points towards sustainability: integrative science and policy for novel (but real landscape futures

    David J. Brunckhorst

    2004-09-01

    Full Text Available Non-metropolitan landscapes are the major theatre of interactions where large-scale alteration occurs precipitated by local to global forces of economic, social and environmental change. However, these regional landscape effects are critical also to local natural resource and social sustainability, ecosystem health through to larger scales of biospheric functioning. The institutions contributing pressures and responses consequently shape future landscapes and in turn influence how social systems, resource users, governments and policy makers perceive those landscapes and their future. These are, in essence, complex social-ecological systems intertwined in a multitude of ways at many spatial scales across time. Over time, the cycles of complex social-ecological systems also reach crossroads, which might be crisis points at which future options are no longer available (possibly because of resource degradation or loss, or turning points where opportunities arise when it is easier to change direction towards more sustainable activities. This paper provides some examples of interdisciplinary research that has provided a holistic integration through close engagement with residents and communities or through deliberately implementing integrative high-risk ‘on-ground’ experimental models to ‘learn by doing’. In the final analysis, each project has characteristically, however, sought to integrate through spatial (if not temporal synthesis, policy analysis and (new or changed institutional arrangements that are relevant locally and corporately, as well as at broader levels of government and geography. This has provided transferable outcomes that can contribute real options and adaptive capacity for suitable positive futures.

  3. Leveraging finances for public health system improvement: results from the Turning Point initiative.

    Bekemeier, Betty; Riley, Catharine M; Berkowitz, Bobbie

    2007-01-01

    Reforming the public health infrastructure requires substantial system changes at the state level; state health agencies, however, often lack the resources and support for strategic planning and systemwide improvement. The Turning Point Initiative provided support for states to focus on large-scale system changes that resulted in increased funding for public health capacity and infrastructure development. Turning Point provides a test case for obtaining financial and institutional resources focused on systems change and infrastructure development-areas for which it has been historically difficult to obtain long-term support. The purpose of this exploratory, descriptive survey research was to enumerate the actual resources leveraged toward public health system improvement through the partnerships, planning, and implementation activities funded by the Robert Wood Johnson Foundation as a part of the Turning Point Initiative.

  4. The Turning Point for the Recent Acceleration of the Universe with a Cosmological Constant

    Zhang T. X.

    2012-04-01

    Full Text Available The turning point and acceleration expansion of the universe are investigated according to the standard cosmological theory with a non-zero cosmological constant. Choosing the Hubble constant H 0 , the radius of the present universe R 0 , and the density parameter in matter Ω M , 0 as three independent parameters, we have analytically examined the other properties of the universe such as the density parameter in dark energy, the cosmologi- cal constant, the mass of the universe, the turning point redshift, the age of the present universe, and the time-dependent radius, expansion rate, velocity, and acceleration pa- rameter of the universe. It is shown that the turning point redshift is only dependent of the density parameter in matter, not explicitly on the Hubble constant and the radius of the present universe. The universe turned its expansion from past deceleration to recent acceleration at the moment when its size was about 3 / 5 of the present size if the density parameter in matter is about 0.3 (or the turning point redshift is 0.67. The expansion rate is very large in the early period and decreases with time to approach the Hubble constant at the present time. The expansion velocity exceeds the light speed in the early period. It decreases to the minimum at the turning point and then increases with time. The minimum and present expansion velocities are determined with the independent parameters. The solution of time-dependent radius shows the universe expands all the time. The universe with a larger present radius, smaller Hubble constant, and / or smaller density parameter in matter is elder. The universe with smaller density parameter in matter accelerates recently in a larger rate but less than unity.

  5. The turning points in the solution of n-queens problem using ...

    We also observed that, using a set of even and odd numbers, the odd number experience a turning point before the even numbers. The algorithm of the standard backtracking method was implemented in C programming language and, we used Microsoft Notepad as our output file to display the arrangement of the queens.

  6. 77 FR 25131 - Turning Point Solar LLC: Notice of Finding of No Significant Impact

    2012-04-27

    ... monocrystalline photovoltaic panels mounted on fixed solar racking equipment and the construction of access roads... DEPARTMENT OF AGRICULTURE Rural Utilities Service Turning Point Solar LLC: Notice of Finding of No... Environmental Assessment (EA) associated with a solar generation project. The EA was prepared in accordance with...

  7. A Systematic Approach to Process Evaluation in the Central Oklahoma Turning Point (COTP) Partnership

    Tolma, Eleni L.; Cheney, Marshall K.; Chrislip, David D.; Blankenship, Derek; Troup, Pam; Hann, Neil

    2011-01-01

    Formation is an important stage of partnership development. Purpose: To describe the systematic approach to process evaluation of a Turning Point initiative in central Oklahoma during the formation stage. The nine-month collaborative effort aimed to develop an action plan to promote health. Methods: A sound planning framework was used in the…

  8. Turning point: the Robert Wood Johnson Foundation's effort to revitalize public health at the state level.

    Hassmiller, Susan

    2002-01-01

    The Robert Wood Johnson (RWJ) Foundation initiated Turning Point in collaboration with the W.K. Kellogg Foundation (Kellogg) in 1997. The purpose of this major national initiative was to strengthen the public health infrastructure in the United States so that states, local communities, and their public health agencies might respond to the challenge to protect and improve the public's health in the 21st century. RWJ funded 21 states and Kellogg funded 43 communities to work together to create a new way of thinking about how health could be improved and who should be involved. Although the ultimate outcome was to improve health, both foundations expected diverse partnerships to work together to create strategic health improvement plans at both the community and state levels. The foundations funded a variety of strategies within those health improvement plans during an implementation phase. The premise in funding partnerships, as opposed to a single entity, was that effective public health systems would be developed best through a shared responsibility (including the private sector) for the health of a community.

  9. A Turning Point? Recent Developments on Inequality in Latin America and the Caribbean

    Gasparini, Leonardo; Cruces, Guillermo; Tornarolli, Leopoldo; Marchionni, Mariana

    2009-01-01

    This paper documents patterns and recent developments on different dimensions of inequality in Latin America and the Caribbean (LAC). New comparative international evidence confirms that LAC is a region of high inequality, although maybe not the highest in the world. Income inequality has fallen in the 2000s, suggesting a turning point from the significant increases of the 1980s and 1990s. There have been some significant improvements toward the reduction in inequalities in the access to prim...

  10. The turning points of revenue management: a brief history of future evolution

    Ian Seymour Yeoman

    2017-04-01

    Full Text Available Purpose – The primary aim of revenue management (RM is to sell the right product to the right customer at the right time for the right price. Ever since the deregulation of US airline industry, and the emergence of the internet as a distribution channel, RM has come of age. The purpose of this paper is to map out ten turning points in the evolution of Revenue Management taking an historical perspective. Design/methodology/approach – The paper is a chronological account based upon published research and literature fundamentally drawn from the Journal of Revenue and Pricing Management. Findings – The significance and success to RM is attributed to the following turning points: Littlewood’s rule, Expected Marginal Seat Revenue, deregulation of the US air industry, single leg to origin and destination RM, the use of family fares, technological advancement, low-cost carriers, dynamic pricing, consumer and price transparency and pricing capabilities in organizations. Originality/value – The originality of the paper lies in identifying the core trends or turning points that have shaped the development of RM thus assisting futurists or forecasters to shape the future.

  11. Influence of acute normobaric hypoxia on physiological variables and lactate turn point determination in trained men.

    Ofner, Michael; Wonisch, Manfred; Frei, Mario; Tschakert, Gerhard; Domej, Wolfgang; Kröpfl, Julia M; Hofmann, Peter

    2014-12-01

    The goal of this study is to evaluate the response of physiological variables to acute normobaric hypoxia compared to normoxia and its influence on the lactate turn point determination according to the three-phase model of energy supply (Phase I: metabolically balanced at muscular level; Phase II: metabolically balanced at systemic level; Phase III: not metabolically balanced) during maximal incremental exercise. Ten physically active (VO2max 3.9 [0.49] l·min(-1)), healthy men (mean age [SD]: 25.3 [4.6] yrs.), participated in the study. All participants performed two maximal cycle ergometric exercise tests under normoxic as well as hypoxic conditions (FiO2 = 14%). Blood lactate concentration, heart rate, gas exchange data, and power output at maximum and the first and the second lactate turn point (LTP1, LTP2), the heart rate turn point (HRTP) and the first and the second ventilatory turn point (VETP1, VETP2) were determined. Since in normobaric hypoxia absolute power output (P) was reduced at all reference points (max: 314 / 274 W; LTP2: 218 / 184 W; LTP1: 110 / 96 W), as well as VO2max (max: 3.90 / 3.23 l·min(-1); LTP2: 2.90 / 2.43 l·min(-1); LTP1: 1.66 / 1.52 l·min(-1)), percentages of Pmax at LTP1, LTP2, HRTP and VETP1, VETP2 were almost identical for hypoxic as well as normoxic conditions. Heart rate was significantly reduced at Pmax in hypoxia (max: 190 / 185 bpm), but no significant differences were found at submaximal control points. Blood lactate concentration was not different at maximum, and all reference points in both conditions. Respiratory exchange ratio (RER) (max: 1.28 / 1.08; LTP2: 1.13 / 0.98) and ventilatory equivalents for O2 (max: 43.4 / 34.0; LTP2: 32.1 / 25.4) and CO2 (max: 34.1 / 31.6; LTP2: 29.1 / 26.1) were significantly higher at some reference points in hypoxia. Significant correlations were found between LTP1 and VETP1 (r = 0.778; p better the performance of the athletes the higher is the effect of hypoxiaThe HRTP and LTP2 are

  12. Approximate solutions and error bounds for the wave equation in a stratified ionosphere with turning points

    Nalesso, G.F.; Jacobson, A.R.

    1991-01-01

    A solution to the problem of a plane electromagnetic wave traveling parallel to a constant magnetic field in a horizontally stratified ionosphere was developed assuming that the permittivity of the medium can be represented as the sum of an unperturbed component and a perturbed component. The method is successfully applied to the case of a linearly varying permittivity of a lossless ionosphere with a superimposed Gaussian perturbing term. The feasibility of applying the method in the presence of an odd number of turning points is discussed. 13 refs

  13. Local Scaling Properties and Market Turning Points at Prague Stock Exchange

    Krištoufek, Ladislav

    2010-01-01

    Roč. 41, č. 6 (2010), s. 1001-1014 ISSN 0587-4254 R&D Projects: GA ČR GA402/09/0965; GA ČR GD402/09/H045 Grant - others:GA UK(CZ) 118310 Institutional research plan: CEZ:AV0Z10750506 Keywords : scaling * Hurst exponent * extreme events Subject RIV: AH - Economics Impact factor: 0.671, year: 2010 http://library.utia.cas.cz/separaty/2010/E/kristoufek-local scaling properties and market turning points at prague stock exchange.pdf

  14. 76 FR 37313 - Turning Point Solar LLC; Notice of Intent To Hold a Public Scoping Meeting and Prepare an...

    2011-06-27

    ... installation of high- efficiency monocrystalline photovoltaic panels mounted on fixed solar racking equipment... DEPARTMENT OF AGRICULTURE Rural Utilities Service Turning Point Solar LLC; Notice of Intent To... related to a proposal by Turning Point Solar LLC. The proposal consists of constructing a 49.9 megawatt...

  15. Revealing turning points in ecosystem functioning over the Northern Eurasian agricultural frontier.

    Horion, Stéphanie; Prishchepov, Alexander V; Verbesselt, Jan; de Beurs, Kirsten; Tagesson, Torbern; Fensholt, Rasmus

    2016-08-01

    The collapse of the Soviet Union in 1991 has been a turning point in the World history that left a unique footprint on the Northern Eurasian ecosystems. Conducting large scale mapping of environmental change and separating between naturogenic and anthropogenic drivers is a difficult endeavor in such highly complex systems. In this research a piece-wise linear regression method was used for breakpoint detection in Rain-Use Efficiency (RUE) time series and a classification of ecosystem response types was produced. Supported by earth observation data, field data, and expert knowledge, this study provides empirical evidence regarding the occurrence of drastic changes in RUE (assessment of the timing, the direction and the significance of these changes) in Northern Eurasian ecosystems between 1982 and 2011. About 36% of the study area (3.4 million km(2) ) showed significant (P agricultural land abandonment. Our study also showed that recurrent droughts deeply affected vegetation productivity throughout the observation period, with a general worsening of the drought conditions in recent years. Moreover, recent human-induced turning points in ecosystem functioning were detected and attributed to ongoing recultivation and change in irrigation practices in the Volgograd region, and to increased salinization and increased grazing intensity around Lake Balkhash. The ecosystem-state assessment method introduced here proved to be a valuable support that highlighted hotspots of potentially altered ecosystems and allowed for disentangling human from climatic disturbances. © 2016 John Wiley & Sons Ltd.

  16. An application of eddy current damping effect on single point diamond turning of titanium alloys

    Yip, W. S.; To, S.

    2017-11-01

    Titanium alloys Ti6Al4V (TC4) have been popularly applied in many industries. They have superior material properties including an excellent strength-to-weight ratio and corrosion resistance. However, they are regarded as difficult to cut materials; serious tool wear, a high level of cutting vibration and low surface integrity are always involved in machining processes especially in ultra-precision machining (UPM). In this paper, a novel hybrid machining technology using an eddy current damping effect is firstly introduced in UPM to suppress machining vibration and improve the machining performance of titanium alloys. A magnetic field was superimposed on samples during single point diamond turning (SPDT) by exposing the samples in between two permanent magnets. When the titanium alloys were rotated within a magnetic field in the SPDT, an eddy current was generated through a stationary magnetic field inside the titanium alloys. An eddy current generated its own magnetic field with the opposite direction of the external magnetic field leading a repulsive force, compensating for the machining vibration induced by the turning process. The experimental results showed a remarkable improvement in cutting force variation, a significant reduction in adhesive tool wear and an extreme long chip formation in comparison to normal SPDT of titanium alloys, suggesting the enhancement of the machinability of titanium alloys using an eddy current damping effect. An eddy current damping effect was firstly introduced in the area of UPM to deliver the results of outstanding machining performance.

  17. An application of eddy current damping effect on single point diamond turning of titanium alloys

    Yip, W S; To, S

    2017-01-01

    Titanium alloys Ti6Al4V (TC4) have been popularly applied in many industries. They have superior material properties including an excellent strength-to-weight ratio and corrosion resistance. However, they are regarded as difficult to cut materials; serious tool wear, a high level of cutting vibration and low surface integrity are always involved in machining processes especially in ultra-precision machining (UPM). In this paper, a novel hybrid machining technology using an eddy current damping effect is firstly introduced in UPM to suppress machining vibration and improve the machining performance of titanium alloys. A magnetic field was superimposed on samples during single point diamond turning (SPDT) by exposing the samples in between two permanent magnets. When the titanium alloys were rotated within a magnetic field in the SPDT, an eddy current was generated through a stationary magnetic field inside the titanium alloys. An eddy current generated its own magnetic field with the opposite direction of the external magnetic field leading a repulsive force, compensating for the machining vibration induced by the turning process. The experimental results showed a remarkable improvement in cutting force variation, a significant reduction in adhesive tool wear and an extreme long chip formation in comparison to normal SPDT of titanium alloys, suggesting the enhancement of the machinability of titanium alloys using an eddy current damping effect. An eddy current damping effect was firstly introduced in the area of UPM to deliver the results of outstanding machining performance. (paper)

  18. Streaming instabilities of a non-neutral plasma with turning points

    Turner, L.; Finn, J.M.

    1995-01-01

    Streaming instabilities of a reflexing beam in a slab model of a beam Penning trap or an inertial electrostatic confinement device are studied. Particles may have turning points that may be between the walls. Linear theory is developed for the case in which the self-field cancels the external potential. If the electric field perturbation is odd about the center, these two-stream modes couple the slow waves on the two beams. Even modes consist of two classes: a class of two-stream modes and another class of complex-frequency modes, coupling the slow and fast waves on the same beam. The latter are unstable over a larger range than the two-stream modes. Thermal spread is stabilizing only when the thermal and streaming velocities are comparable. Numerical results for the general class of equilibria show both two-stream-like modes and oscillating modes

  19. A Dynamic Model of the Environmental Kuznets Curve. Turning Point and Public Policy

    Egli, H.; Steger, T.M. [CER-ETH Center of Economic Research at ETH Zurich, ZUE F 10, CH-8092 Zurich (Switzerland)

    2007-01-15

    We set up a simple dynamic macroeconomic model with (1) polluting consumption and a preference for a clean environment, (2) increasing returns in abatement giving rise to an EKC and (3) sustained growth resulting from a linear final-output technology. There are two sorts of market failures caused by external effects associated with consumption and environmental effort. The model is employed to investigate the determinants of the turning point and the cost effectiveness of different public policies aimed at a reduction of the environmental burden. Moreover, the model offers a potential explanation of an N-shaped pollution-income relation. It is shown that the model is compatible with most empirical regularities on economic growth and the environment.

  20. Turning points in international labor migration: a case study of Thailand.

    Vasuprasat, P

    1994-01-01

    "This article describes the dynamics of the structural transformation of the Thai economy, labor migration and direct foreign investment and proposes an econometric model to explain the migration phenomenon. Though migration shifts have been significantly influenced by political factors such as the Gulf crisis and tensions with Saudi Arabia, economic factors such as the Thai government's liberalization of markets and the expansion of trade and direct foreign investment have contributed to changes in labor market needs. The economic conditions of a shift from net exporter to net importer for labor are posited in the model. The empirical results reveal a turning point in labor migration from Thailand and also confirm the contribution of commodity export in place of labor export in creating employment and income." excerpt

  1. A Qualitative Study of Turning Points or Aha! Moments in Older Adults' Discussions About Organ Donation.

    Downing, Kimberly; Jones, Linda L

    2018-01-01

    Older adults (50-70 years old) have lower organ donor registration rates than younger adults. Older adults have different informational needs and donor registration behavior than younger age groups. The objective of this qualitative study was to understand insights of older adults about organ donation to effectively address the barriers to becoming an organ donor. This study identified turning points as "Aha!" moments that occurred during a dialogue intervention where older adults discussed benefits, barriers, and process to organ donation. Dialogues were held with small groups of older adults in 11 communities in a Midwestern organ procurement organization service area. Participants were positive to organ donation, but not registered as an organ donor. Methods/Approach: Qualitative analysis of verbatim comments from the dialogue and a follow-up survey were used to examine turning points or "Aha!" moments of participants' decision-making about organ donation and organ donor registration. Twenty-one separate in-depth dialogues were conducted with 198 participants, with mean age of 60.57 years. There were 2757 separate comments coded with 465 of the comments (17%) identified as providing Aha! moments during the dialogue. Three themes include benefits of organ donation (30%), barriers about organ donation (39%), and organ donation process (31%). The research identified moments in the dialogue where possible learning about organ donation may have occurred. After participation in the dialogue process, there was an increase in intent to register to be an organ donor, organ donation discussion with family and friends, and organ donor registration.

  2. Nitrate transport and supply limitations quantified using high-frequency stream monitoring and turning point analysis

    Jones, Christopher S.; Wang, Bo; Schilling, Keith E.; Chan, Kung-sik

    2017-06-01

    Agricultural landscapes often leak inorganic nitrogen to the stream network, usually in the form of nitrate-nitrite (NOx-N), degrading downstream water quality on both the local and regional scales. While the spatial distribution of nitrate sources has been delineated in many watersheds, less is known about the complicated temporal dynamics that drive stream NOx-N because traditional methods of stream grab sampling are often conducted at a low frequency. Deployment of accurate real-time, continuous measurement devices that have been developed in recent years enables high-frequency sampling that provides detailed information on the concentration-discharge relation and the timing of NOx-N delivery to streams. We aggregated 15-min interval NOx-N and discharge data over a nine-year period into daily averages and then used robust statistical methods to identify how the discharge regime within an artificially-drained agricultural watershed reflected catchment hydrology and NOx-N delivery pathways. We then quantified how transport and supply limitations varied from year-to-year and how dependence of these limitations varied with climate, especially drought. Our results show NOx-N concentrations increased linearly with discharge up to an average "turning point" of 1.42 mm of area-normalized discharge, after which concentrations decline with increasing discharge. We estimate transport and supply limitations to govern 57 and 43 percent, respectively, of the NOx-N flux over the nine-year period. Drought effects on the NOx-N flux linger for multiple years and this is reflected in a greater tendency toward supply limitations in the three years following drought. How the turning point varies with climate may aid in prediction of NOx-N loading in future climate regimes.

  3. The Nature of Child-Adult Interaction. From Turn-Taking to Understanding Pointing and Use of Pointing Gestures

    Białek Arkadiusz

    2014-08-01

    Full Text Available Analyses of interactions between an adult and a one-year-old child are often connected with studying early communicative competences, e.g. the child’s participation in turn-taking sequences, in joint attention, and use of pointing gestures. Infants’ communicative behaviors were studied using a structured observational measure - the Early Social Communication Scales (Mundy et al., 2003 in a study of 358 12-month-old children. An exploratory factor analysis revealed: (i a distinction between the categories of initiation and response among the behaviors displayed, (ii simple and complex behavior categories occurring; (iii the presence within one factor of behaviors fulfilling various functions (e.g. requesting and sharing interest. An analysis of the results showed that communicative competences can be classified according to their level and ignoring their function, and made it possible to suggest modifications to the way in which behaviors are coded on the ESCS and to complement the procedure of studying early communicative competences.

  4. Coupling effects on turning points of infectious diseases epidemics in scale-free networks.

    Kim, Kiseong; Lee, Sangyeon; Lee, Doheon; Lee, Kwang Hyung

    2017-05-31

    Pandemic is a typical spreading phenomenon that can be observed in the human society and is dependent on the structure of the social network. The Susceptible-Infective-Recovered (SIR) model describes spreading phenomena using two spreading factors; contagiousness (β) and recovery rate (γ). Some network models are trying to reflect the social network, but the real structure is difficult to uncover. We have developed a spreading phenomenon simulator that can input the epidemic parameters and network parameters and performed the experiment of disease propagation. The simulation result was analyzed to construct a new marker VRTP distribution. We also induced the VRTP formula for three of the network mathematical models. We suggest new marker VRTP (value of recovered on turning point) to describe the coupling between the SIR spreading and the Scale-free (SF) network and observe the aspects of the coupling effects with the various of spreading and network parameters. We also derive the analytic formulation of VRTP in the fully mixed model, the configuration model, and the degree-based model respectively in the mathematical function form for the insights on the relationship between experimental simulation and theoretical consideration. We discover the coupling effect between SIR spreading and SF network through devising novel marker VRTP which reflects the shifting effect and relates to entropy.

  5. Brokdorf - the symbol for a political turning-point. Brokdorf - Symbol einer politischen Wende

    Aust, S

    1981-01-01

    Brokdorf - this spot in the North of the F.R. of Germany designates a front which is no longer the only place where the argument of 'yes' or 'no' to nuclear energy is discussed. The citizens have lost their confidence in the competence of those governing, some concerns have betrayed them, politicians have lied, and the sufficiently-known German shortsightedness has kept up celebrating tradition - this is what has happened during the seven years' war about the Brokdorf nuclear power plant. For even without nuclear power the lights won't go out and the unemployment figures will not increase. In the meantime the heavy protests of environmentally-minded citizens against an industrial power which is solely orientated towards competition has seized all strata of our society. Now, since a handful of politicians are also timidly beginning to refuse to submit themselves to the alleged forces underlying the existing circumstances, the conflict between big industry and governmental power is programmed at least as far as topics of energy policy are concerned. A political turning-point. Or does the atomic state show its teeth because it is afraid of the democratic formation of a common will of those who it used to consider as an incapacitated herd of voters.

  6. Hysteresis compensation for piezoelectric actuators in single-point diamond turning

    Wang, Haifeng; Hu, Dejin; Wan, Daping; Liu, Hongbin

    2006-02-01

    In recent years, interests have been growing for fast tool servo (FTS) systems to increase the capability of existing single-point diamond turning machines. Although piezoelectric actuator is the most universal base of FTS system due to its high stiffness, accuracy and bandwidth, nonlinearity in piezoceramics limits both the static and dynamic performance of piezoelectric-actuated control systems evidently. To compensate the nonlinear hysteresis behavior of piezoelectric actuators, a hybrid model coupled with Preisach model and feedforward neural network (FNN) has been described. Since the training of FNN does not require a special calibration sequence, it is possible for on-line identification and real-time implementation with general operating data of a specific piezoelectric actuator. To describe the rate dependent behavior of piezoelectric actuators, a hybrid dynamic model was developed to predict the response of piezoelectric actuators in a wider range of input frequency. Experimental results show that a maximal error of less than 3% was accomplished by this dynamic model.

  7. Turning points in nonlinear business cycle theories, financial crisis and the 2007-2008 downturn.

    Dore, Mohammed H I; Singh, Ragiv G

    2009-10-01

    This paper reviews three nonlinear dynamical business cycle theories of which only one (The Goodwin model) reflects the stylized facts of observed business cycles and has a plausible turning point mechanism. The paper then examines the US (and now global) financial crisis of 2008 and the accompanying downturn in the US. The paper argues that a skewed income distribution could not sustain effective demand and that over the 2001-2006 expansion demand was maintained through massive amounts of credit, with more than 50 percent of sales in the US being maintained through credit. A vector autoregression model confirms the crucial role played by credit. However legislative changes that dismantled the restrictions placed on the financial sector after the crash of 1929 and the consequent structural changes in the financial sector after 1980 enabled the growth of new debt instruments and credit. But overexpansion of credit when profits and house prices were declining in 2005/06 led to a nonlinear shift due to a new realization of the poor quality of some of this debt, namely mortgage backed securities. Bankruptcies, followed by retrenchment at the banks, then led to the bursting of the credit bubble, with the possibility of a severe recession.

  8. 1996, a turning point in the evolution of the EDF with good financial results

    1997-03-01

    This conference held on March 1997 presents the financial results obtained in 1996 by French Electricity Company EDF (Electricite de France). This year represented a turning point because essential landmarks were established in 1996. An european directive has been adopted in 1996 defining the framework in which european electricity market will function as well as the rules for its opening to competition. Discussions with the trade unions were conducted at the beginning of 1997 and a social agreement aiming at the amelioration of services and hiring of 11,000 to 15,000 young people in the next three years. Finally, a new contract of enterprise with the state has been discussed and approved in March 5, 1997, which redefined the place and the role of EDF in the French economy, in the new stage of electricity market started by the opening to competition. The document contains the following 8 chapters: 1. Financial results and enterprise management; 2. Institutional frame and the relation with the state; 3. Development in France; 4. International development; 5. Alliances, partnerships and cooperation; 6. Management, social and human resources; 7. Environment; 8. Technical results

  9. Life shocks and crime: a test of the "turning point" hypothesis.

    Corman, Hope; Noonan, Kelly; Reichman, Nancy E; Schwartz-Soicher, Ofira

    2011-08-01

    Other researchers have posited that important events in men's lives-such as employment, marriage, and parenthood-strengthen their social ties and lead them to refrain from crime. A challenge in empirically testing this hypothesis has been the issue of self-selection into life transitions. This study contributes to this literature by estimating the effects of an exogenous life shock on crime. We use data from the Fragile Families and Child Wellbeing Study, augmented with information from hospital medical records, to estimate the effects of the birth of a child with a severe health problem on the likelihood that the infant's father engages in illegal activities. We conduct a number of auxiliary analyses to examine exogeneity assumptions. We find that having an infant born with a severe health condition increases the likelihood that the father is convicted of a crime in the three-year period following the birth of the child, and at least part of the effect appears to operate through work and changes in parental relationships. These results provide evidence that life events can cause crime and, as such, support the "turning point" hypothesis.

  10. Making the case: leveraging resources toward public health system improvement in Turning Point states.

    Bekemeier, Betty; Riley, Catharine M; Padgett, Stephen M; Berkowitz, Bobbie

    2007-01-01

    Leveraging funds to sustain the efforts of a grant-funded initiative is often an explicit, or implicit, expectation in philanthropy. However, the magnitude of funds leveraged and the factors that facilitate success in leveraging are rarely researched. An example of one of these grant-funded initiatives is the National Turning Point Initiative. Twenty-one states received funding from The Robert Wood Johnson Foundation as part of this initiative to establish and implement strategic goals for achieving significant statewide public health system improvement through diverse, cross-sector partnerships. Leaders from 17 of these 21 states participated in a two-phased study regarding the leveraging of additional funds for their public health infrastructure improvement activities. This article reports on the second phase of the study. In this phase, key informant interviews were conducted to examine how leveraging of resources occurred as part of this large national initiative. Findings indicate that the combination of a comprehensive planning process and a broad-based partnership was crucial in securing resources to expand their efforts. The ability to strategically respond to unexpected events and opportunities also helped states use their plans and partnerships to "make the case" for additional resources to improve their public health infrastructure.

  11. Postural strategies and sensory integration: no turning point between childhood and adolescence.

    Sophie Mallau

    reweighting for postural strategies as assessed by very slow support oscillations presents a linear development without any qualitative turning point between childhood and adolescence.

  12. Are Mentor Relationships Helping Organizations? An Exploration of Developing Mentee-Mentor-Organizational Identifications Using Turning Point Analysis.

    Bullis, Connie; Bach, Betsy Wackernagel

    1989-01-01

    Examines developing mentor relationships and the association between mentor relationships and individual-organizational relationships. Indicates that many turning points occur later than proposed in broad-phase models of mentor relationship development. Finds that mentor relationships should not be assumed to benefit organizations. (SR)

  13. Fabrication of fiber optic long period gratings operating at the phase matching turning point using an amplitude mask

    Hromadka, J.; Correia, R.; Korposh, S.

    2016-05-01

    A fast method for the fabrication of the long period gratings (LPG) optical fibres operating at or near the phase matching turning point (PMTP) with the period of 109.0, 109.5 and 110.0 μm based on an amplitude mask writing system is described. The proposed system allows fabricating 3 cm long LPG sensors operating at PMPT within 20 min that is approximately 8 times faster than point-by-point approach. The reproducibility of the fabrication process was thoroughly studied. The response of the fabricated LPGs to the external change of the refractive index was investigated using water and methanol.

  14. The complexity of interior point methods for solving discounted turn-based stochastic games

    Hansen, Thomas Dueholm; Ibsen-Jensen, Rasmus

    2013-01-01

    for general 2TBSGs. This implies that a number of interior point methods can be used to solve 2TBSGs. We consider two such algorithms: the unified interior point method of Kojima, Megiddo, Noma, and Yoshise, and the interior point potential reduction algorithm of Kojima, Megiddo, and Ye. The algorithms run...... states and discount factor γ we get κ=Θ(n(1−γ)2) , −δ=Θ(n√1−γ) , and 1/θ=Θ(n(1−γ)2) in the worst case. The lower bounds for κ, − δ, and 1/θ are all obtained using the same family of deterministic games....

  15. Turning Weaknesses into Strengths: Nordic Tourism, Potentials for Growth and Major Challenges

    Ruhet Genc

    2010-03-01

    Full Text Available Nordic region is a geographical area which is characterized by a combination of nature, culture, history and technology and regarded as a common entity in political, economical and historical sense. Although rich in its resources, Nordic tourism has not actualized its potential in full. The present paper aims to identify weaknesses of the region, to outline a new set of directions for improving Nordic tourism and to delineate major challenges. Its geographical and natural beauties, cultural characteristics, technological advancement and policy development are identified as assets for tourism advancement in the region. Winter tourism, adventure tourism, nature-based tourism and cultural tourism are demonstrated as potential routes of growth. Marketing strategies and changing trends are discussed as major challenges, with suggestions for implementation.

  16. ROK-U.S. Security Relations: The China Factor and a Turning Point

    Kim, Sung

    2002-01-01

    ... to maintaining a tight alliance relationship between Seoul and Washington during the Cold War era, the recently increasing importance of China in South Korea's strategic calculations has become a major...

  17. China's climate change positions: at a turning point?

    Tangen, K.; Heggelund, G.; Buen, J.

    2001-03-01

    The purpose of this article is to discuss major concerns and perceptions underlying Chinese positions in the international climate negotiations. China has asserted that concrete action on the part of developed countries is a precondition for any developing country action. It has been sceptical of the Kyoto Mechanisms and has consistently refused to discuss quantified emission limits for developing countries. China's position regarding the Clean Development Mechanism has, however, developed from scepticism towards a more pragmatic focus on maximising benefits. The dynamics of China's positioning can partly be explained by perceptions of costs, but also 'high politics', and tactical considerations. However, in light of the external and internal forces for change, it is worth asking how long it will be in China's interest to stick to its present position. (author)

  18. Turning point for US diets? Recessionary effects or behavioral shifts in foods purchased and consumed.

    Ng, Shu Wen; Slining, Meghan M; Popkin, Barry M

    2014-03-01

    In the past decade, the United States has seen declining energy intakes and plateauing obesity levels. We examined whether these observed trends suggest a longer-term shift in dietary and health behavior that is independent of adverse economic conditions. We used nationally representative cross-sectional surveys on intake and longitudinal household food purchase data along with random-effects models to address this question. Data included individuals in NHANES 2003-2004 to 2009-2010 (children: n = 13,422; adults: n = 10,791) and households from the 2000-2011 Nielsen Homescan Panel (households with children: n = 57,298; households with adults only: n = 108,932). In both data sets, we showed that children decreased their calories the most. Even after we controlled for important socioeconomic factors, caloric purchases fell significantly from 2003 to 2011 (P purchases, in which a 1-percentage point increase in unemployment in the local market was associated with a 1.6-4.1-kcal · capita⁻¹ · d⁻¹ (P purchased. Results also indicated shifts in caloric purchases were driven more by declines in caloric purchases from beverages than food. US consumers have exhibited changes in intake and purchasing behavior since 2003 that were independent from changing economic conditions linked with the Great Recession or food prices. Public health efforts in the past decade may have contributed to this trend.

  19. A turning point in the concept of justice: from Adam Smith to John Stuart Mill

    Estrella Trincado Aznar

    2012-01-01

    Full Text Available Classical economists, John Stuart Mill included, based their theories on Adam Smith’s system. At some point, they labelled it as a "utilitarian" theory. However, Smith was non-utilitarian, perhaps even anti-utilitarian. One of the most amazing differences between classical economics versus Smithian theory consists of their concept of justice. Classical economics were based on a utilitarian concept; Smith criticizes the concept of utilitarian justice. Utility being a subjective picture, classical economists find it more difficult to draw limits to state intervention than Smith does. This paper compares Smith’s and John Stuart Mill’s concept of justice when they make the case for land tenure. Mill admits that society cannot properly be said to owe anything to the poor. However, not arguing from 'abstract rights,' but from 'utility' understood in its largest sense, Mill defended the nationalization of land. Mill was unable to draw any limits to state intervention. Conversely, Smith defended that justice is not a utilitarian concept. In this case, limits to state intervention are more easily drawn.

  20. A turning point in the concept of justice: from Adam Smith to John Stuart Mill

    Estrella Trincado Aznar

    2015-07-01

    Full Text Available Classical economists, John Stuart Mill included, based their theories on Adam Smith’s system. At some point, they labelled it as a "utilitarian" theory. However, Smith was non-utilitarian, perhaps even anti-utilitarian. One of the most amazing differences between classical economics versus Smithian theory consists of their concept of justice. Classical economics were based on a utilitarian concept; Smith criticizes the concept of utilitarian justice. Utility being a subjective picture, classical economists find it more difficult to draw limits to state intervention than Smith does. This paper compares Smith’s and John Stuart Mill’s concept of justice when they make the case for land tenure. Mill admits that society cannot properly be said to owe anything to the poor. However, not arguing from 'abstract rights,' but from 'utility' understood in its largest sense, Mill defended the nationalization of land. Mill was unable to draw any limits to state intervention. Conversely, Smith defended that justice is not a utilitarian concept. In this case, limits to state intervention are more easily drawn.

  1. Expectation of fairness: a turning point in the professional satisfaction of Iranian nurses.

    Rafii, Forough; Nasrabadi, Alireza Nikbakht; Forooshani, Zahra Sadat Dibaji

    2016-06-01

    The professional satisfaction of staff is one of the most challenging organizational concepts that can enhance the efficiency level of organizations. In a similar vein, the professional satisfaction of nurses is of considerable importance, in that, professional dissatisfaction among nurses could result in emotional detachment, depression, anger, evasion from work, and inefficacy and would negatively impact the organization's work rate. The aim of this study was to understand Iranian nurses' experiences of the concept of professional satisfaction. This was a qualitative study conducted with a targeted sampling of 10 nurses (4 men and 6 women) in 2015. The data were collected through conducting in-depth interviews, and textual data were analyzed subsequently using the Qualitative Content Analysis (QCA) method. The findings of this study pointed to "fair conduct," which was comprised of three sub-categories, i.e., expectation of fairness in social-professional settings, expectation of fairness in receiving professional benefits, and expectation of fairness in the area of professional interactions. There are various ups and downs in nursing due to the challenging nature of the profession, from the initial education at the university until retirement. According to the findings of this study, a lack of fairness in social-professional settings, a lack of fairness in receiving professional benefits, and a lack of fairness in the area of professional interactions were among the factors that have great impacts on the degree of professional dissatisfaction among nurses.

  2. Effects of major-road vehicle speed and driver age and gender on left-turn gap acceptance.

    Yan, Xuedong; Radwan, Essam; Guo, Dahai

    2007-07-01

    Because the driver's gap-acceptance maneuver is a complex and risky driving behavior, it is a highly concerned topic for traffic safety and operation. Previous studies have mainly focused on the driver's gap acceptance decision itself but did not pay attention to the maneuver process and driving behaviors. Using a driving simulator experiment for left-turn gap acceptance at a stop-controlled intersection, this study evaluated the effects of major traffic speed and driver age and gender on gap acceptance behaviors. The experiment results illustrate relationships among drivers' left-turn gap decision, driver's acceleration rate, steering action, and the influence of the gap-acceptance maneuver on the vehicles in the major traffic stream. The experiment results identified an association between high crash risk and high traffic speed at stop-controlled intersections. The older drivers, especially older female drivers, displayed a conservative driving attitude as a compensation for reduced driving ability, but also showed to be the most vulnerable group for the relatively complex driving maneuvers.

  3. Turning point or selection? The effect of rustication on subsequent health for the Chinese Cultural Revolution cohort.

    Fan, Wen

    2016-05-01

    During the Chinese Cultural Revolution (1966-76), Chairman Mao sent 17 million urban youth to rural areas to be "reeducated." These "sent-down" youth spent years working alongside peasants, enduring inadequate diets, shelter and medical attention. What were the consequences for subsequent health? Was there a benefit to individuals in the leading or trailing edges of this cohort? Was this a fundamental turning point or were selection process at work? Drawing on the 1994 State and Life Chances in Urban China Survey, I find the health disadvantage at midlife is mostly borne by members of the trailing-edge sub-cohort who lived in the countryside for more than five years. Results from propensity-score analysis indicate a selection process: those who suffered most came from disadvantaged backgrounds. Life chances following the rusticates' return home, however, either do not differ from those who stayed in cities or do not relate to health, refuting the turning-point view, at least in terms of midlife health. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Noncontact on-machine measurement system based on capacitive displacement sensors for single-point diamond turning

    Li, Xingchang; Zhang, Zhiyu; Hu, Haifei; Li, Yingjie; Xiong, Ling; Zhang, Xuejun; Yan, Jiwang

    2018-04-01

    On-machine measurements can improve the form accuracy of optical surfaces in single-point diamond turning applications; however, commercially available linear variable differential transformer sensors are inaccurate and can potentially scratch the surface. We present an on-machine measurement system based on capacitive displacement sensors for high-precision optical surfaces. In the proposed system, a position-trigger method of measurement was developed to ensure strict correspondence between the measurement points and the measurement data with no intervening time-delay. In addition, a double-sensor measurement was proposed to reduce the electric signal noise during spindle rotation. Using the proposed system, the repeatability of 80-nm peak-to-valley (PV) and 8-nm root-mean-square (RMS) was achieved through analyzing four successive measurement results. The accuracy of 109-nm PV and 14-nm RMS was obtained by comparing with the interferometer measurement result. An aluminum spherical mirror with a diameter of 300 mm was fabricated, and the resulting measured form error after one compensation cut was decreased to 254 nm in PV and 52 nm in RMS. These results confirm that the measurements of the surface form errors were successfully used to modify the cutting tool path during the compensation cut, thereby ensuring that the diamond turning process was more deterministic. In addition, the results show that the noise level was significantly reduced with the reference sensor even under a high rotational speed.

  5. The Machadian turning point

    Roberto Schwarz

    Full Text Available The article examines the evolution of the works of Machado de Assis and stresses their exceptionality within the Brazilian postcolonial literary context, focusing on the author's thematic and formal volte-face with regard to the novels of the first phase. From Memórias póstumas de Brás Cubas - The Posthumous Memoirs of Bras Cubas, often subtitled as the Epitaph of a Small Winner - (1880 on, Machadian fiction takes on a new composition principle, which challenges the conventions dictated by realism and whose uniqueness lies in the narrator's arbitrary and transgressive development. While the narrative sets a tone that is both cosmopolitan and universalizing in dealing with local matters, it takes on the perspective of the lordly class. By identifying the events that constitute this procedure, the author highlights the literary genius and the scope of the Machadian view on the particularities of social relations in Brazil.

  6. [INVITED] Design of turn around point long period fiber grating sensor with Au-nanoparticle self monolayer

    Bandyopadhyay, Sankhyabrata; Basumallick, Nandini; Bysakh, Sandip; Dey, Tanoy Kumar; Biswas, Palas; Bandyopadhyay, Somnath

    2018-06-01

    In this paper studies on the design and fabrication of a long period fiber grating (LPFG) with a self mono layer of gold nanoparticle (AuNP) has been presented. Refractive index (RI) sensitivity of a dispersed cladding mode (DCM) near turn around point (TAP) of its phase matching curve (PMC) has been investigated with and also without AuNP coated LPFG. The typical role played by the intermediate layer of AuNP on the effective index and thus on the sensitivity of the cladding mode to the surrounding RI has also been explored by carrying out coupled mode analysis of the requisite multilayer waveguide. Deposition of AuNP enhanced the sensitivity by more than a factor of 2. Measured sensitivity was found to be ∼3928 nm/refractive index unit (RIU) in the range of 1.3333-1.3428.

  7. A Turning Point in the Translation of Shakespeare into Catalan: The Case of Josep M. De Sagarra’s Macbeth

    Berjaga Vanessa Palomo

    2017-12-01

    Full Text Available Josep Maria de Sagarra translated twenty-eight of Shakespeare’s plays into Catalan in the early forties, at a time when Catalan language and culture were suffering severe repression due to Franco’s regime. The manuscript of Macbeth by Sagarra is from 1942; and the first edition (an impressive hard-bound clandestine edition is from 1946 or 1947. Before his translation, there were three other Catalan translations of Macbeth, produced by Cebrià Montoliu (1907, Diego Ruiz (1908 and Cèsar August Jordana (1928. The main purpose of this article is to show that Sagarra’s translations marked a turning point regarding the translation of Shakespeare’s works in Catalan culture. This is done by reflecting on both cultural and personal circumstances that led Sagarra to translate Shakespeare and by comparing Sagarra’s translation of Macbeth with the other three from the first half of the twentieth century.

  8. The Turning Point for Morphomechanical Remodeling During Complete Intestinal Obstruction in Rats Occurs After 12-24 h.

    Sun, Daming; Zhao, Jingbo; Liao, Donghua; Huang, Zhiyong; Gregersen, Hans

    2018-05-01

    Intestinal obstruction prompts luminal dilation and wall remodeling proximal to the site of obstruction. Studies on temporal and spatial morphomechanical remodeling are needed for comprehending the pathophysiology of acute intestinal obstruction. The aim was to estimate the no-load and zero-stress morphomechanical properties in circumferential and longitudinal direction at 0, 6, 12, 24, 36, and 48 h after complete intestinal obstruction. Obstruction of the distal ileum was created surgically by placement of a polyethylene ring for up to 48 h in 30 rats. Sham and normal groups were also studied (n = 12). Five 6 cm-long intestinal segments proximal to the obstruction site were used for histological, morphometric and mechanical analysis at the designated times. Morphomechanical changes were huge but only subtle changes were observed between the 5 segments during the obstruction period. Due to dilation, the serosal length and mucosal length increased continuously from 6 to 48 h (p h and beyond (p h where after the opening angle increased and the bending angle returned to pre-obstruction levels. For the residual stretch ratios and the position of the neutral axis the turning point was found after 24 h. Histologically, the thickness and area of most wall layers were quite stable for the first 12 h but with an increase at the 24 h time point that continued to the 48 h time point. The most pronounced change was found for the circumferential muscle layer (p h after creating the obstruction.

  9. L'aplicació TurningPoint com a eina d'aprenentatge transformacional en els processos educatius

    Antonio Marín García

    2016-06-01

    Full Text Available El projecte de convergència educativa impulsat per l'Espai Europeu d'Educació Superior (EEES ha generat noves metodologies docents i processos d'avaluació en els sistemes d'educació universitaris. Aquest nou plantejament pedagògic genera una inqüestionable oportunitat perquè els distints segments de la comunitat universitària vegen en les TIC una ferramenta fonamental per a l'elaboració de continguts docents que faciliten el procés ensenyança-aprenentatge. Aquest article presenta la ferramenta TurningPoint, que es centra en afavorir la interacció docent-alumne, facilitant la participació i l'avaluació contínua. Aquesta ferramenta presenta avantatges enfront d'altres aplicacions existents a causa de la seua varietat d'utilitats i potencial d'ús, i ha sigut utilitzada amb èxit a diversos programes promoguts per la Facultat d'Economia de la Universitat de València. 

  10. Managing Contextual Complexity in an Experiential Learning Course: A Dynamic Systems Approach through the Identification of Turning Points in Students' Emotional Trajectories

    Gloria Nogueiras

    2017-05-01

    Full Text Available This study adopts a dynamic systems approach to investigate how individuals successfully manage contextual complexity. To that end, we tracked individuals' emotional trajectories during a challenging training course, seeking qualitative changes–turning points—and we tested their relationship with the perceived complexity of the training. The research context was a 5-day higher education course based on process-oriented experiential learning, and the sample consisted of 17 students. The students used a five-point Likert scale to rate the intensity of 16 emotions and the complexity of the training on 8 measurement points. Monte Carlo permutation tests enabled to identify 30 turning points in the 272 emotional trajectories analyzed (17 students * 16 emotions each. 83% of the turning points indicated a change of pattern in the emotional trajectories that consisted of: (a increasingly intense positive emotions or (b decreasingly intense negative emotions. These turning points also coincided with particularly complex periods in the training as perceived by the participants (p = 0.003, and p = 0.001 respectively. The relationship between positively-trended turning points in the students' emotional trajectories and the complexity of the training may be interpreted as evidence of a successful management of the cognitive conflict arising from the clash between the students' prior ways of meaning-making and the challenging demands of the training. One of the strengths of this study is that it provides a relatively simple procedure for identifying turning points in developmental trajectories, which can be applied to various longitudinal experiences that are very common in educational and developmental contexts. Additionally, the findings contribute to sustaining that the assumption that complex contextual demands lead unfailingly to individuals' learning is incomplete. Instead, it is how individuals manage complexity which may or may not lead to

  11. TOWARDS COLLABORATION BETWEEN PUBLIC WELFARE AGENCIES AND MASS ENTERTAINMENT MEDIA TO BRING ABOUT A TURNING POINT STAGE IN THE LIVES OF BATTERED WOMEN

    Nourit Segev

    2010-06-01

    Full Text Available This article examines the promoting and impeding factors that advance the turning point in thelives of battered women. The subject is important because of the contribution of the turning pointstage to the ability of women to leave the violent relationship and the way in which the publicwelfare agencies become involved in order to help the victim to advance towards the turning point.The article also reviews the influence of the entertainment media in shaping the positions of thepublic regarding marital violence, the presentation of battered women in the media, and theconnection between their media presentation and their advancement towards the turning point inreality.The research is based on a combination of qualitative and quantitative data, and focuses on contentanalysis. The qualitative content analysis included 40 journal articles, 1 documentary film and onedrama series, the personal interviews included 8 social workers and 6 journalists, and the focusgroup included 8 battered women. The findings indicate an awareness of battered women in thevarious media, and of a gap between the perception of social workers and the journalists regardingthe role of the media in raising social problems.The article calls for cooperation between the media and the professionals in order to construct messages of empowerment that will enable women to advance towards the turning point in theirlives.

  12. Transitions in state public health law: comparative analysis of state public health law reform following the Turning Point Model State Public Health Act.

    Meier, Benjamin Mason; Hodge, James G; Gebbie, Kristine M

    2009-03-01

    Given the public health importance of law modernization, we undertook a comparative analysis of policy efforts in 4 states (Alaska, South Carolina, Wisconsin, and Nebraska) that have considered public health law reform based on the Turning Point Model State Public Health Act. Through national legislative tracking and state case studies, we investigated how the Turning Point Act's model legal language has been considered for incorporation into state law and analyzed key facilitating and inhibiting factors for public health law reform. Our findings provide the practice community with a research base to facilitate further law reform and inform future scholarship on the role of law as a determinant of the public's health.

  13. Do Nondomestic Undergraduates Choose a Major Field in Order to Maximize Grade Point Averages?

    Bergman, Matthew E.; Fass-Holmes, Barry

    2016-01-01

    The authors investigated whether undergraduates attending an American West Coast public university who were not U.S. citizens (nondomestic) maximized their grade point averages (GPA) through their choice of major field. Multiple regression hierarchical linear modeling analyses showed that major field's effect size was small for these…

  14. Fixation of operating point and measurement of turn on characteristics of IGBT F4-75R06W1E3

    Haseena, A.; Subhash Joshi T., G.; George, Saly

    2018-05-01

    For the proficient operation of the Power electronic circuit, signal level performance of power electronic devices are very important. For getting good signal level characteristics, fixing operating point is very critical. Device deviates from the typical characteristics given in the datasheet due to the presence of stray components in the circuit lay out. Fixation of operating point of typical silicon IGBT and its turn on characteristics is discussed in this paper.

  15. Turns prediction : Turns prediction

    Fuchs, Patrick; Etchebest, Catherine; De Brevern, Alexandre

    2007-01-01

    The description of protein 3D structure usually focuses on the repetitive local folds (alpha-helices and beta-sheets). The remaining class, sometimes called unordered region, has often been considered as random (one also calls it ‘random coil'). However, some interesting local folds are also highly recurrent and definitely more structured than a real random region. One of such particularly interesting motif is tight turn; this latter is characterized by few residues (3 to 5) and by the revers...

  16. Auto-ethnographical investigation of turning points in dance education – a method for creating awareness of one’s own pre-understanding in qualitative research

    Trine Ørbæk

    2013-06-01

    Full Text Available This article presents an auto-ethnographical investigation of a pedagogical practice in creative dance education. This research is a part of the PhD-project “To create dance” in physical education teacher education based at The Norwegian School of Sport Sciences and The Norwegian National Graduate School in Teacher Education. The method used is based on life stories, and turning points are used as analytical tools. The turning point analysis highlights that an auto-ethnographical investigation is relevant when it comes to creating awareness of pre-understandings in the development of pedagogical experiences from one’s own research field. In addition, the article shows that the turning point analysis may contribute to increasing knowledge on how one’s own experience can change when narrated in new ways. Finally, the study shows that making use of auto-ethnography may also have value as a reflexive approach for becoming more conscious of one’s own research process.

  17. Turned on/turned off

    Petersen, Eva Bendix

    2016-01-01

    position, it attempts to sense into the lived experience of being subject to, and of, turns in social theory. As a whole the paper seeks to work with and allow for multiplicity in tone, focus, researcher positioning, reader positioning, and more, to see what knowledge that does not seek confident closure......Through cacophonic story-telling, emerging from ethnographic observations from academic scenes in Australia and elsewhere, the article seeks to explore the timeliness and untimeliness of feminist knowledge production. Rather than arguing a particular point or making a claim for a particular...

  18. Relative stability of major types of beta-turns as a function of amino acid composition: a study based on Ab initio energetic and natural abundance data.

    Perczel, András; Jákli, Imre; McAllister, Michael A; Csizmadia, Imre G

    2003-06-06

    Folding properties of small globular proteins are determined by their amino acid sequence (primary structure). This holds both for local (secondary structure) and for global conformational features of linear polypeptides and proteins composed from natural amino acid derivatives. It thus provides the rational basis of structure prediction algorithms. The shortest secondary structure element, the beta-turn, most typically adopts either a type I or a type II form, depending on the amino acid composition. Herein we investigate the sequence-dependent folding stability of both major types of beta-turns using simple dipeptide models (-Xxx-Yyy-). Gas-phase ab initio properties of 16 carefully selected and suitably protected dipeptide models (for example Val-Ser, Ala-Gly, Ser-Ser) were studied. For each backbone fold most probable side-chain conformers were considered. Fully optimized 321G RHF molecular structures were employed in medium level [B3LYP/6-311++G(d,p)//RHF/3-21G] energy calculations to estimate relative populations of the different backbone conformers. Our results show that the preference for beta-turn forms as calculated by quantum mechanics and observed in Xray determined proteins correlates significantly.

  19. Estimating continuous floodplain and major river bed topography mixing ordinal coutour lines and topographic points

    Bailly, J. S.; Dartevelle, M.; Delenne, C.; Rousseau, A.

    2017-12-01

    Floodplain and major river bed topography govern many river biophysical processes during floods. Despite the grow of direct topographic measurements from LiDARS on riverine systems, it still room to develop methods for large (e.g. deltas) or very local (e.g. ponds) riverine systems that take advantage of information coming from simple SAR or optical image processing on floodplain, resulting from waterbodies delineation during flood up or down, and producing ordered coutour lines. The next challenge is thus to exploit such data in order to estimate continuous topography on the floodplain combining heterogeneous data: a topographic points dataset and a located but unknown and ordered contourline dataset. This article is comparing two methods designed to estimate continuous topography on the floodplain mixing ordinal coutour lines and continuous topographic points. For both methods a first estimation step is to value each contourline with elevation and a second step is next to estimate the continuous field from both topographic points and valued contourlines. The first proposed method is a stochastic method starting from multigaussian random-fields and conditional simualtion. The second is a deterministic method based on radial spline fonction for thin layers used for approximated bivariate surface construction. Results are first shown and discussed from a set of synoptic case studies presenting various topographic points density and topographic smoothness. Next, results are shown and discuss on an actual case study in the Montagua laguna, located in the north of Valparaiso, Chile.

  20. World must build two atomic reactors each day the next hundred years. [Summary of and commentary on book, 'Mankind at the Turning Point'

    1974-07-24

    In summarizing and commenting on the ideas presented in Mesarovic and Pestel's book ''Mankind at the Turning Point'' it is pointed out that the global energy crisis makes comprehensive long-term planning a necessity. Assuming, optimistically, that nuclear power alone is able to supply the total projected energy demand in 100 years, it is stated that this will require 3000 nuclear power stations, each with 8 fast breeder reactors, totally 100 GW(t). This means a net rate of construction of four reactors per week, which again means allowing for a 30-year life, two reactors per day, every day, for the next hundred years. Fueling of these reactors will require the production and transport of 15 x 10/sup 6/ kg of /sup 239/Pu per year. It is therefore obvious that the energy crisis is not only a technological, but also a political, social, and even psychological problem.

  1. World must build two atomic reactors each day the next hundred years. [Summary of and commentary on book, 'Mankind at the Turning Point'

    1974-07-24

    In summarizing and commenting on the ideas presented in Mesarovic and Pestel's book ''Mankind at the Turning Point'' it is pointed out that the global energy crisis makes comprehensive long-term planning a necessity. Assuming, optimistically, that nuclear power alone is able to supply the total projected energy demand in 100 years, it is stated that this will require 3000 nuclear power stations, each with 8 fast breeder reactors, totally 100 GW(t). This means a net rate of construction of four reactors per week, which again means allowing for a 30-year life, two reactors per day, every day, for the next hundred years. Fueling of these reactors will require the production and transport of 15 x 10/sup 6/ kg of /sup 239/Pu per year. It is therefore obvious that the energy crisis is not only a technological, but also a political, social, and even psychological problem.

  2. Learning turning points--in life with long-term illness--visualized with the help of the life-world philosophy.

    Berglund, Mia M U

    2014-01-01

    A long-term illness is an occurrence that changes one's life and generates a need to learn how to live with it. This article is based on an empirical study of interviews on people living with different long-term illnesses. The results have shown that the learning process is a complex phenomenon interwoven with life as a whole. The essential meaning of learning to live with long-term illness concerns a movement toward a change of understanding of access to the world. In this movement, in which everyday lives as well as relationships with oneself and others are affected, a continual renegotiation is needed. Texts from existential/lifeworld philosopher, Heidegger and Gadamer, have been used to get a greater understanding of the empirical results. These texts have been analysed with particular focus on learning turning points and the importance of reflection. The results are highlighted under the following themes: Pursuit of balance-the aim of learning, The tense grip-the resistance to learning, To live more really-the possibilities of the learning, Distancing-the how of the learning, and The tense of the learning-the whole of the learning. In those learning turning points are present. Knowledge from this study has been used to make a didactic model designed to give caregivers a tool to support patients' learning. The didactic model is called: The challenge to take charge of life with a long-term illness.

  3. Long-period gratings in photonic crystal fibers operating near the phase-matching turning point for evanescent chemical and biochemical sensing

    Kanka, Jiri

    2012-06-01

    Fiber-optic long-period grating (LPG) operating near the dispersion turning point in its phase matching curve (PMC), referred to as a Turn Around Point (TAP) LPG, is known to be extremely sensitive to external parameters. Moreover, in a TAP LPG the phase matching condition can be almost satisfied over large spectral range, yielding a broadband LPG operation. TAP LPGs have been investigated, namely for use as broadband mode convertors and biosensors. So far TAP LPGs have been realized in specially designed or post-processed conventional fibers, not yet in PCFs, which allow a great degree of freedom in engineering the fiber's dispersion properties through the control of the PCF structural parameters. We have developed the design optimization technique for TAP PCF LPGs employing the finite element method for PCF modal analysis in a combination with the Nelder-Mead simplex method for minimizing the objective function based on target-specific PCF properties. Using this tool we have designed TAP PCF LPGs for specified wavelength ranges and refractive indices of medium in the air holes. Possible TAP PCF-LPG operational regimes - dual-resonance, broadband mode conversion and transmitted intensity-based operation - will be demonstrated numerically. Potential and limitations of TAP PCF-LPGs for evanescent chemical and biochemical sensing will be assessed.

  4. Is This The Turning Point?

    denise

    social sciences and, equally important, the seemingly ever-changing methodological scenarios ... qualitative research approaches per se in ... The latest book on qualitative research methods ... Qualitative and Quantitative Paradigms Shape.

  5. Pilot program: NRC severe reactor accident incident response training manual. Overview and summary of major points

    McKenna, T.J.; Martin, J.A. Jr.; Giitter, J.G.; Miller, C.W.; Hively, L.M.; Sharpe, R.W.; Watkins

    1987-02-01

    Overview and Summary of Major Points is the first in a series of volumes that collectively summarize the U.S. Nuclear Regulatory Commission (NRC) emergency response during severe power reactor accidents and provide necessary background information. This volume describes elementary perspectives on severe accidents and accident assessment. Other volumes in the series are: Volume 2-Severe Reactor Accident Overview; Volume 3- Response of Licensee and State and Local Officials; Volume 4-Public Protective Actions-Predetermined Criteria and Initial Actions; Volume 5 - U.S. Nuclear Regulatory Commission. Each volume serves, respectively, as the text for a course of instruction in a series of courses for NRC response personnel. These materials do not provide guidance or license requirements for NRC licensees. The volumes have been organized into these training modules to accommodate the scheduling and duty needs of participating NRC staff. Each volume is accompanied by an appendix of slides that can be used to present this material

  6. Big rock point restoration project BWR major component removal, packaging and shipping - planning and experience

    Milner, T.; Dam, S.; Papp, M.; Slade, J.; Slimp, B.; Nurden, P.

    2001-01-01

    The Big Rock Point boiling water reactor (BWR) at Charlevoix, MI was permanently shut down on August 29th 1997. In 1999 BNFL Inc.'s Reactor Decommissioning Group (RDG) was awarded a contract by Consumers Energy (CECo) for the Big Rock Point (BRP) Major Component Removal (MCR) project. BNFL Inc. RDG has teamed with MOTA, Sargent and Lundy and MDM Services to plan and execute MCR in support of the facility restoration project. The facility restoration project will be completed by 2005. Key to the success of the project has been the integration of best available demonstrated technology into a robust and responsive project management approach, which places emphasis on safety and quality assurance in achieving project milestones linked to time and cost. To support decommissioning of the BRP MCR activities, a reactor vessel (RV) shipping container is required. Discussed in this paper is the design and fabrication of a 10 CFR Part 71 Type B container necessary to ship the BRP RV. The container to be used for transportation of the RV to the burial site was designed as an Exclusive Use Type B package for shipment and burial at the Barnwell, South Carolina (SC) disposal facility. (author)

  7. Keys to Successful Diabetes Self-Management for Uninsured Patients: Social Support, Observational Learning, and Turning Points A Safety Net Providers’ Strategic Alliance Study

    Hanahan, Melissa A.; Werner, James J.; Tomsik, Phillip; Weirich, Stephen A.; Reichsman, Ann; Navracruz, Lisa; Clemons-Clark, Terri; Cella, Peggi; Terchek, Joshua; Munson, Michelle R.

    2015-01-01

    Objective To determine how medically uninsured patients with limited material resources successfully manage diabetes. Methods Clinicians at 5 safety net practices enrolled uninsured adult patients (N=26) with prior diagnosis of diabetes for 6 months or longer. Patients were interviewed about enabling factors, motivations, resources, and barriers. Chart reviews and clinician surveys supplemented interview data. Interview, survey, and chart review data were analyzed and findings were summarized. Results Two distinct groups of patients were investigated: 1) “successful,” defined as those with an HbA1c of ≤7% or a recent improvement of at least 2% (n=17); and 2) “unsuccessful,” defined as patients with HbA1c of ≥9% (n=9) without recent improvement. In comparison to unsuccessful patients, successful patients more often reported having friends or family with diabetes, sought information about the disease, used evidence-based self-management strategies, held an accurate perception of their own disease control, and experienced “turning point” events that motivated increased efforts in disease management. Conclusions Uninsured safety net patients who successfully managed diabetes learned from friends and family with diabetes and leveraged disease-related events into motivational turning points. It may be beneficial for clinicians to incorporate social learning and motivational enhancement into diabetes interventions to increase patients’ motivation for improved levels of self-management. PMID:21671529

  8. Keys to successful diabetes self-management for uninsured patients: social support, observational learning, and turning points: a safety net providers' strategic alliance study.

    Madden, Melissa Hanahan; Tomsik, Philip; Terchek, Joshua; Navracruz, Lisa; Reichsman, Ann; Clark, Terri Clemons; Cella, Peggi; Weirich, Stephen A; Munson, Michelle R; Werner, James J

    2011-03-01

    To examine how medically uninsured patients who receive health care at federally qualified health centers and free clinics are able to successfully self-manage diabetes compared to patients who are less successful. Two distinct groups of patients with diabetes for 6 months or longer were enrolled: (1) successful, defined as those with glycated hemoglobin (HbA1c) of 7% or less or a recent improvement of at least 2% (n=17); and (2) unsuccessful, defined as patients with HbAlc of at least 9% (n=9) and without recent improvement. Patients were interviewed about enabling factors, motivators, resources, and barriers to diabetes self-management. Data from interviews, chart reviews, and clinician surveys were analyzed using qualitative methods and statistical techniques. African Americans comprised 57.7% of the sample and whites 38.5% (N=26). No significant differences were detected between successful and unsuccessful groups in age, race, education, or employment status. Clinicians rated unsuccessful patients as having more severe diabetes and significantly lower levels of control than successful patients. Compared to unsuccessful patients, successful patients more often reported having friends or family with diabetes, more frequently sought information about the disease, used evidence-based self-management strategies, held more accurate perceptions of their own diabetes control, and experienced "turning point" events that motivated increased efforts in disease management. Patients who successfully managed diabetes learned from diabetic family members and interpreted disease-related events as motivational turning points. It may be beneficial to incorporate social learning and motivational enhancement into diabetes interventions to increase patients' motivation for improved levels of self-management.

  9. The Rio Orinoco and the haven - two major cases from a legal point of view

    Jacobsson, M.

    1993-01-01

    The International Oil Pollution Compensation Fund (IOPC Fund), an inter-governmental organization with 49 member states, has recently been involved in two major oil spills of great interest from both a legal and a technical point of view. The Rio Orinoco incident occurred in Canada and the Haven incident took place in Italy. The Rio Orinoco was carrying asphalt when it grounded in the Gulf of St Lawrence. The grounding led to extensive salvage and cleanup operations carried out on behalf of the Canadian authorities. The claims for compensation, totalling 15 million Canadian dollars (12.5 million US dollars), were settled out of court. This paper discusses the main legal problems that arose, for example, the reasonableness of certain operations and the relationship between pollution prevention and salvage. The Haven exploded off Genoa with 144,000 metric tons of crude oil on board. A large quantity of oil escaped, necessitating extensive cleanup operations in Italy, France, and Monaco. Over 1,300 claims for compensation have been submitted totalling US$1.4 billion. This paper deals with some of the main legal problems that have arisen as a result of this incident, for example, the admissibility of claims relating to non-economic damage to the marine environment and the method to be applied for the conversion of the maximum amount payable by the IOPC Fund into Italian lire

  10. Distribution majorization of corner points by reinforcement learning for moving object detection

    Wu, Hao; Yu, Hao; Zhou, Dongxiang; Cheng, Yongqiang

    2018-04-01

    Corner points play an important role in moving object detection, especially in the case of free-moving camera. Corner points provide more accurate information than other pixels and reduce the computation which is unnecessary. Previous works only use intensity information to locate the corner points, however, the information that former and the last frames provided also can be used. We utilize the information to focus on more valuable area and ignore the invaluable area. The proposed algorithm is based on reinforcement learning, which regards the detection of corner points as a Markov process. In the Markov model, the video to be detected is regarded as environment, the selections of blocks for one corner point are regarded as actions and the performance of detection is regarded as state. Corner points are assigned to be the blocks which are seperated from original whole image. Experimentally, we select a conventional method which uses marching and Random Sample Consensus algorithm to obtain objects as the main framework and utilize our algorithm to improve the result. The comparison between the conventional method and the same one with our algorithm show that our algorithm reduce 70% of the false detection.

  11. Nonpoint and Point Sources of Nitrogen in Major Watersheds of the United States

    Puckett, Larry J.

    1994-01-01

    Estimates of nonpoint and point sources of nitrogen were made for 107 watersheds located in the U.S. Geological Survey's National Water-Quality Assessment Program study units throughout the conterminous United States. The proportions of nitrogen originating from fertilizer, manure, atmospheric deposition, sewage, and industrial sources were found to vary with climate, hydrologic conditions, land use, population, and physiography. Fertilizer sources of nitrogen are proportionally greater in agricultural areas of the West and the Midwest than in other parts of the Nation. Animal manure contributes large proportions of nitrogen in the South and parts of the Northeast. Atmospheric deposition of nitrogen is generally greatest in areas of greatest precipitation, such as the Northeast. Point sources (sewage and industrial) generally are predominant in watersheds near cities, where they may account for large proportions of the nitrogen in streams. The transport of nitrogen in streams increases as amounts of precipitation and runoff increase and is greatest in the Northeastern United States. Because no single nonpoint nitrogen source is dominant everywhere, approaches to control nitrogen must vary throughout the Nation. Watershed-based approaches to understanding nonpoint and point sources of contamination, as used by the National Water-Quality Assessment Program, will aid water-quality and environmental managers to devise methods to reduce nitrogen pollution.

  12. Vocational Preference Inventory High Point Codes Versus Expressed Choices as Predictors of College Major and Career Entry

    Gade, Eldon M.; Soliah, David

    1975-01-01

    For 151 male graduates of the University of North Dakota, expressed choices measured by preferences made as high school seniors on the ACT Student Profile Section were significantly more accurate predictors of graduating college major and of career entry occupation than were their Vocational Preference Inventory high point codes. (Author)

  13. Teacher points to dyslexia as a major cause of school failure

    Vicente Martins

    2002-01-01

    Full Text Available In the past seven years, Professor Vincent Martins has developed studies on the contribution of linguistics to the diagnosis of dyslexia. The dyslexia is a disturbance or inconvenience to the level of reading. The dyslexic children is a bad player: you can read but can not effectively understand what you read. The estimate of the teacher is that, in Brazil at least 15 million children and young people suffering with disorders of letters. For the teacher, the dyslexia is the major cause of low school performance.

  14. Radiological signs pointing to altered correlations between heart and major vessels, esophagus and trachea

    Frantsov, S.

    1993-01-01

    A number of rather frequently encountered varieties and anomalies, involving heart and major vessels, esophagus, trachea, lungs and their X-ray images, are outlined. The study rests on rich experience with X-ray diagnosis of congenital cardiovascular malformations and acquired heart defects, and considers their complexity and difficult differential diagnosis. The radiological signs and diagnostic algorithm of examination are described, followed by a discussion of the differential diagnosis. The author's experience is based on X-ray diagnosis verified during operation. 9 refs., 1 fig. (orig.)

  15. Major unsolved points in adult neurogenesis: doors open on a translational future?

    Paolo ePeretto

    2014-06-01

    Full Text Available The ultimate goal of exploiting adult neurogenesis (AN as a source of cell replacement is far from being achieved. In spite of many data gathered during the last two decades on homeostatic and reactive neurogenesis, it is evident that such knowledge is not sufficient for granting translational outcomes. By asking the question whether AN research field has to be considered as a dead end in such a perspective, here we review some major unresolved issues: multifaceted evolutionary constraints emerged in mammals, stem/progenitor cell type/availability and tissue permissivity, the possible impact on other brain functions and/or interplay with other forms of plasticity, and relevance in humans. We suggest that full understanding of AN biological processes is an essential step to their possible exploitation for brain repair, and that further fundamental, multidisciplinary research is required before translational outcomes can be reached. Scientist's attitude and their communication skills are also important. To avoid overestimation of AN reparative potential, more distant goals of cell replacement should be kept clearly distinct from restorative approaches involving AN plasticity, both representing translational perspectives.

  16. Identifying and characterizing major emission point sources as a basis for geospatial distribution of mercury emissions inventories

    Steenhuisen, Frits; Wilson, Simon J.

    2015-07-01

    Mercury is a global pollutant that poses threats to ecosystem and human health. Due to its global transport, mercury contamination is found in regions of the Earth that are remote from major emissions areas, including the Polar regions. Global anthropogenic emission inventories identify important sectors and industries responsible for emissions at a national level; however, to be useful for air transport modelling, more precise information on the locations of emission is required. This paper describes the methodology applied, and the results of work that was conducted to assign anthropogenic mercury emissions to point sources as part of geospatial mapping of the 2010 global anthropogenic mercury emissions inventory prepared by AMAP/UNEP. Major point-source emission sectors addressed in this work account for about 850 tonnes of the emissions included in the 2010 inventory. This work allocated more than 90% of these emissions to some 4600 identified point source locations, including significantly more point source locations in Africa, Asia, Australia and South America than had been identified during previous work to geospatially-distribute the 2005 global inventory. The results demonstrate the utility and the limitations of using existing, mainly public domain resources to accomplish this work. Assumptions necessary to make use of selected online resources are discussed, as are artefacts that can arise when these assumptions are applied to assign (national-sector) emissions estimates to point sources in various countries and regions. Notwithstanding the limitations of the available information, the value of this procedure over alternative methods commonly used to geo-spatially distribute emissions, such as use of 'proxy' datasets to represent emissions patterns, is illustrated. Improvements in information that would facilitate greater use of these methods in future work to assign emissions to point-sources are discussed. These include improvements to both national

  17. Turn key contracts

    Feretic, D.

    1975-01-01

    The aim of this summary is to point out some specific areas which have to be covered in a turn-key contract and which are of primarily interest to the buyer of a nuclear plant. It will be assumed that the buyer is utility company in a developing country and a plant supplier a company in an industrial country. (orig./FW) [de

  18. General Case in Determining Center-To-Center Spacing Between the Screw and the Roller in a Roller Drive, and Initial Contact Point of Their Mating Thread Turns. Development of Calculation Method and Software

    D. S. Blinov

    2017-01-01

    Full Text Available One of the most important trends in development of machine engineering is to improve load capacity of mechanisms, assemblies and parts without increasing their overall dimensions and weight. This is also relevant to the most promising items so far, i.e. orbital roller drives (ORD, which are the rotational-to-progressive motion converters widely used in vehicles. The previously published article suggested increasing a load capacity (by about 15% through reducing a thread turn section angle of the threaded ORD components and change of the radius of roller thread turn section outline. Due to such ORD modification, a number of the most critical ORD parameters are to be changed thereby demanding further research. Further, the article published suggests a method considering the abovementioned changes to calculate the dimensions of ORD main components and their tolerance ranges.Though this method being not complete as the increment of ORD center-to-center spacing in relation to its rated value, required for assembly, is unknown; and to determine the ORD center-to-center spacing increment, outer diameters of the roller and screw threads are to be known. Hence, these two methods are interconnected.This article presents the numerical calculation method, mathematical support and method to determine the increment of ORD center-to-center spacing and initial contact point of the mating roller and screw thread turns. Due to considerable scope of calculations, the method was turned into the software.Similar calculation methods and techniques were developed to a particular case, where the thread turn section angle of the threaded components was of 90°, and the roller thread turn section outline was a circular arc centered to the roller axis. Hence the developed numerical calculation method, mathematical support and technique refer to the general case which is to determine the ORD center-to-center spacing increment and initial contact point of the mating roller

  19. Air emission points for facilities in Iowa with operating permits for Title V of the Federal Clean Air Act_considered MAJOR permits

    Iowa State University GIS Support and Research Facility — Air emission points for facilities in Iowa with operating permits for Title V of the Federal Clean Air Act, considered "major" permits. Also includes emission points...

  20. Tight turns

    Anaïs Schaeffer

    2012-01-01

    The Italian National Institute for Nuclear Physics (INFN) has successfully tested the first model of a new fast-ramping curved dipole magnet. This is great news for CERN, which sees the advance as holding potential for the future of the SPS.   The first model of a new fast-ramping curved dipole magnet being prepared for cryogenic testing at the LASA laboratory (INFN Milano, Italy). On 16 July INFN introduced an innovative dipole magnet. With a length of some 4 metres, it can produce a 4.5 Tesla magnetic field and achieve a tighter bend than ever before (the bending radius has been squeezed to a remarkable 66.7 metres). This new magnet was designed in the first instance for GSI’s SIS300 synchrotron (in Germany), which will require 60 dipoles of this type. "Achieving such a tight bend demanded a major R&D effort," stressed Pasquale Fabbricatore, the spokesman of the INFN collaboration responsible for the magnet’s development. "We had to not o...

  1. Articulating the history and major departure points evident in post-apartheid South African national water policy and law

    Chikozho, C.; Danga, L.; Saruchera, D.

    2017-08-01

    Governance of the water sector in South Africa has reflected the political changes taking place in society. For instance, due to apartheid policies of segregation, inequality of access to water resources marks South Africa's history in a very profound way and redistribution of rights to water to redress the results of past discrimination became an explicit purpose of the post-apartheid water governance policy and legislative regime. In this paper, we articulate the history and major departure points evident in post-apartheid South African national water policy and law. This includes documenting and reflecting on most of the available information that shows how the new water policy and law were developed. Findings from the study show that the key players active in the water law review process deliberately took into account the political goals and dynamics of power asymmetry within which the law was being articulated. Therefore, the water law as it stands today and in the past must be understood within the context of the socio-economic and political landscape that has prevailed in South Africa at different historical junctures. We contend that a detailed examination and articulation of the history and major departure points evident in post-apartheid South African national water policy and law enables practitioners and scholars to better understand the main motivations behind the water sector reforms and the then prevailing thinking behind the policy and legislation eventually promulgated. The present water law must be understood in the context of these reforms and the objectives they sought to achieve.

  2. Diamond turning of glass

    Blackley, W.S.; Scattergood, R.O.

    1988-12-01

    A new research initiative will be undertaken to investigate the critical cutting depth concepts for single point diamond turning of brittle, amorphous materials. Inorganic glasses and a brittle, thermoset polymer (organic glass) are the principal candidate materials. Interrupted cutting tests similar to those done in earlier research are Ge and Si crystals will be made to obtain critical depth values as a function of machining parameters. The results will provide systematic data with which to assess machining performance on glasses and amorphous materials

  3. Migration as a turning point in food habits: the early phase of dietary acculturation among women from South Asian, African, and Middle Eastern Countries living in Norway.

    Terragni, Laura; Garnweidner, Lisa M; Pettersen, Kjell Sverre; Mosdøl, Annhild

    2014-01-01

    This article explores the early phase of dietary acculturation after migration. South Asian, African and Middle Eastern women (N = 21) living in Norway were interviewed about their early experiences with food in a new context. The findings pointed to abrupt changes in food habits in the first period after migration. To various degrees, women reported unfamiliarity with foods in shops, uncertainty about meal formats and food preparation and fear of eating food prohibited by their religion. Their food consumption tended to be restricted to food items perceived as familiar or safe. Our findings indicate that the first period after migration represents a specific phase in the process of dietary acculturation. Early initiatives aimed at enhancing confidence in food and familiarity with the new food culture are recommended.

  4. Heraclitean logos and flux in T.S. Eliot’s Four Quartets: 'cosmic consciousness' and 'the still point of the turning world'

    A. Wessels

    2001-08-01

    Full Text Available T.S. Eliot prefaces “Burnt Norton”, the first of his Four Quartets, with two quotations from the Greek philosopher, Heraclitus. By means of these epigrams, Eliot points us to the Heraclitean opposition and paradoxical interdependence between logos and flux as a paradigm in the poem, a paradigm that he uses for an investigation and articulation of a number of philosophical contemplations. In this paper, I discuss Eliot’s different configurations of the logos/flux paradigm in the poem, firstly to illuminate the relationship between temporality and eternity, secondly, to elaborate the relationship between God and humanity, and thirdly to express the relationship between structured art and chaotic experience. In each instance it is not only the opposition between the two elements that is important, but also the point of contact, the intersection. There is some evidence that Eliot’s depiction of this intersection as, for example, the “moment in and out of time”, is based on personal experience of a transcendent, mystical nature. His expression of this experience is also investigated by comparing it to similar experiences described by others, notably by a Canadian psychiatrist, Richard Maurice Bucke. A comparison of Bucke’s description in his evolutionist text of 1901 and Eliot’s poetic rendering reveals not only surprising similarities but also essential differences which highlights Eliot’s purely Christian interpretation in the face of Bucke’s more universalist approach. For T.S. Eliot, eternity or timelessness can only be accessed through the temporal experience of human consciousness, in fleeting moments of exaltation in daily life, in the charged, timeless configurations of art as an imitation of divine creation, and finally in Christ, who embodies the love of God and is for Eliot the ultimate transection of the temporal and eternal, the flux and the logos.

  5. Un antes y un después: del riesgo o deterioro de la integridad cutánea a la integridad tisular Turning point: From risk or damage of skin integrity to tissue integrity

    José María Carrasco Herrero

    2008-09-01

    Full Text Available Las úlceras vasculares y las úlceras de pie diabético suponen un grave problema sanitario que afecta a un gran número de pacientes y constituyen, por ello, un gran reto de trabajo para los profesionales de la salud. Los ácidos grasos hiperoxgenados (AGHO han demostrado tener eficacia gracias a su acción favorable sobre la piel, aumentando la microcirculación sanguínea, impulsando la renovación celular epidérmica y mejorando notablemente la hidratación cutánea. Hemos evaluado la eficacia del producto Mepentol® Leche, una emulsión a base de ácidos grasos hiperoxigenados, Aloe barbadensis y Mimosa tenuiflora, en el cuidado de la piel y el alivio de los síntomas, en pacientes de riesgo o con úlceras vasculares y úlceras de pie diabético. Se demuestra un antes y un después en el uso sistemático de Mepentol® Leche, evitando la sequedad cutánea, reduciendo el prurito, escozor, dolor y eczema, y devolviendo la piel a su coloración normal.Vascular ulcers and diabetic foot ulcers present a health serious problem which affects a large number of patients, creating a major challenge for health professionals. Hyperoxygenated fatty acid dressings have proven to be effective thanks to their favorable action on the skin, increasing the microcirculation of the blood, promoting the renovation of the epidermic cells, and notably increasing cutaneous hydration. We evaluate the effectiveness of Mepentol® Leche, an emulsion based on Hyper-oxygenated fatty acids, Aloe barbadensis and Mimosa tenuiflora, used to treat the skin and alleviate symptoms in patients at risk or with vascular ulcers and diabetic foot ulcers. This study showed a turning point in applying this product systematically, avoiding skin dryness and reducing itching, stinging, pain and eczema while returning normal color to the skin.

  6. Nuclear technology in a changing world: Have we reached a turning point? 3 November 2005, Massachusetts, USA, David J. Rose Lecture, Massachusetts Institute of Technology

    ElBaradei, M.

    2005-01-01

    and the European Union focused on exploring the technical and commercial viability of future reactor systems. The Forum has selected six innovative nuclear systems for collaborative R and D. Major research initiatives (in China, Europe, Japan, the Republic of Korea and the US) are also focused on innovative nuclear systems to produce hydrogen for fuel cells that could be used in transportation. The IAEA is putting increasing emphasis on the theme of 'energy for development'. An increasing range of nuclear and isotopic techniques is used to address challenges - particularly in the developing world - like for example plant breeding to increase yield and resistance or isotope hydrology to map out groundwater resources. Advance technologies and innovative approaches have been used to prevent the proliferation of nuclear weapons, like satellite imagery and advanced nuclear forensic techniques. A great deal of attention is given to building proliferation resistance into future reactor systems, multilateral approaches to the nuclear fuel cycle and research reactor conversion and return of HEU fuel. The stage is set for change and the future of nuclear technology will depend not only on technological innovation, but also on vision, leadership and multilateral cooperation

  7. Point Source contamination approach for hydrological risk assessment of a major hypothetical accident from second research reactor at Inshas site

    Sadek, M.A.; Tawfik, F.S.

    2002-01-01

    The point source contamination mechanism and the deterministic conservative approach have been implemented to demonstrate the hazards of hydrological pollution due to a major hypothetical accident in the second research reactor at Inshas. The radioactive inventory is assumed to be dissolved in 75% of the cooling water (25% are lost) and comes directly into contact with ground water and moved down gradient. Five radioisotopes(I-129, Sr-90, Ru-106, Cs-134 and Cs-137) of the entire inventory are found to be highly durable and represent vulnerability in the environment. Their downstream spread indices; C max : maximum concentration at the focus of the moving ellipse, delta: pollution duration at different distances, A:polluted area at different distances and X min : safety distance from the reactor, were calculated based on analytical solutions of the convection-dispersion partial differential equation for absorbable and decaying species. The largest downstream contamination range was found for Sr-90 and Ru-106 but still no potential. The geochemical and hydrological parameters of the water bearing formations play a great role in buffering and limiting the radiation effects. These reduce the retention time of the radioisotopes several order of magnitudes in the polluted distances. Sensitivity analysis of the computed pollution ranges shows low sensitivity to possible potential for variations activity of nuclide inventory, dispersivity and saturated thickness and high sensitivity for possible variations in groundwater velocity and retention factors

  8. At a long-awaited turning point

    Ghosh, Arindam; Krishnan, Yamuna

    2014-07-01

    Research in nanotechnology in India is on an upswing given the substantial investments in the past two decades. Making an impact globally will now require investing in education, entrepreneurship, translational science, infrastructure for manufacturing, and changing the administrative mindset.

  9. Training Needs Identification: A Turning Point.

    Thomas, Edwin A.

    1982-01-01

    Describes a systematic approach to training needs identification that is directly tied to changing organizational events and performance requirements. The discussion includes nine questions which address performance expectations. (JJD)

  10. Cooling power technology at a turning point

    Hese, L.H.

    1978-01-01

    From freshwater cooling and efflux condenser cooling to wet recirculation cooling, hybrid and dry cooling towers, cooling tower technology has seen a development characterized by higher cooling tower costs and reduced power plant efficiency. Therefore, all research work done at the moment concentrates on making up for the economic losses connected with improved environmental protection. (orig.) [de

  11. Nuclear energy at the turning point

    Weinberg, A.M.

    1977-07-01

    In deciding the future course of nuclear energy, it is necessary to re-examine man's long-term energy options, in particular solar energy and the breeder reactor. Both systems pose difficultiies: energy from the sun is likely to be expensive as well as limited, whereas a massive world-wide deployment of nuclear breeders will create problems of safety and of proliferation. Nuclear energy's long-term success depends on resolving both of these problems. Collocation of nuclear facilities with a system of resident inspectors are measures that ought to help increase the proliferation-resistance as well as the safety of a large-scale, long-term nuclear system based on breeders. In such a long-term system a strengthened International Atomic Energy Agency (IAEA) is viewed as playing a central role.

  12. The third turning point: Community college movement

    Filipović Mirko

    2012-01-01

    Full Text Available Traditional American higher education system, that once was adequate for education of social elite, had to adapt, after the Second World War, to the new wave of students who would occupy middle level and relatively powerless jobs in growing corporate economy and public sector. The Community College Movement was an adequate response to the need for legitimating the new social stratification through school credentials, to the demands of minorities and lower classes youth for ever widening access to higher education, and to the demand for professionalization of some occupational groups aspiring to achieve higher social status. Through class based channeling and educational inflation, higher educational system contributes, in its own way, to preserve the existing patterns of social inequalities.

  13. German Defense Policy At A Turning Point

    2014-04-01

    In discussing “the question of Germany’s normalizing ambitions”, Chaya Arora (2006) describes three important developments that have “added to...22). Which War to Mention?; Germany’s Russia Policy. The Economist, p. 25. Arora, Chaya . (2006). Germany’s Civilian Power Diplomacy: NATO...Dieter Dettke, Germany Says “No”, 73. 22 Ibid., 72. 23 Adrian Hyde-Price, Germany & European Order, 123. 24 Ibid., 123. 25 Ibid., 123. 26 Chaya

  14. Barriers to Point-of-Care Testing in India: Results from Qualitative Research across Different Settings, Users and Major Diseases

    Engel, Nora; Ganesh, Gayatri; Patil, Mamata; Yellappa, Vijayashree; Pant Pai, Nitika; Vadnais, Caroline; Pai, Madhukar

    2015-01-01

    Background Successful point-of-care testing, namely ensuring the completion of the test and treat cycle in the same encounter, has immense potential to reduce diagnostic and treatment delays, and impact patient outcomes. However, having rapid tests is not enough, as many barriers may prevent their successful implementation in point-of-care testing programs. Qualitative research on diagnostic practices may help identify such barriers across different points of care in health systems. Methods In this exploratory qualitative study, we conducted 78 semi-structured interviews and 13 focus group discussions in an urban and rural area of Karnataka, India, with healthcare providers (doctors, nurses, specialists, traditional healers, and informal providers), patients, community health workers, test manufacturers, laboratory technicians, program managers and policy-makers. Participants were purposively sampled to represent settings of hospitals, peripheral labs, clinics, communities and homes, in both the public and private sectors. Results In the Indian context, the onus is on the patient to ensure successful point-of-care testing across homes, clinics, labs and hospitals, amidst uncoordinated providers with divergent and often competing practices, in settings lacking material, money and human resources. We identified three overarching themes affecting point-of-care testing: the main theme is ‘relationships’ among providers and between providers and patients, influenced by the cross-cutting theme of ‘infrastructure’. Challenges with both result in ‘modified practices’ often favouring empirical (symptomatic) treatment over treatment guided by testing. Conclusions Even if tests can be conducted on the spot and infrastructure challenges have been resolved, relationships among providers and between patients and providers are crucial for successful point-of-care testing. Furthermore, these barriers do not act in isolation, but are interlinked and need to be examined

  15. Barriers to Point-of-Care Testing in India: Results from Qualitative Research across Different Settings, Users and Major Diseases.

    Nora Engel

    Full Text Available Successful point-of-care testing, namely ensuring the completion of the test and treat cycle in the same encounter, has immense potential to reduce diagnostic and treatment delays, and impact patient outcomes. However, having rapid tests is not enough, as many barriers may prevent their successful implementation in point-of-care testing programs. Qualitative research on diagnostic practices may help identify such barriers across different points of care in health systems.In this exploratory qualitative study, we conducted 78 semi-structured interviews and 13 focus group discussions in an urban and rural area of Karnataka, India, with healthcare providers (doctors, nurses, specialists, traditional healers, and informal providers, patients, community health workers, test manufacturers, laboratory technicians, program managers and policy-makers. Participants were purposively sampled to represent settings of hospitals, peripheral labs, clinics, communities and homes, in both the public and private sectors.In the Indian context, the onus is on the patient to ensure successful point-of-care testing across homes, clinics, labs and hospitals, amidst uncoordinated providers with divergent and often competing practices, in settings lacking material, money and human resources. We identified three overarching themes affecting point-of-care testing: the main theme is 'relationships' among providers and between providers and patients, influenced by the cross-cutting theme of 'infrastructure'. Challenges with both result in 'modified practices' often favouring empirical (symptomatic treatment over treatment guided by testing.Even if tests can be conducted on the spot and infrastructure challenges have been resolved, relationships among providers and between patients and providers are crucial for successful point-of-care testing. Furthermore, these barriers do not act in isolation, but are interlinked and need to be examined as such. Also, a test alone has only

  16. Identifying and characterizing major emission point sources as a basis for geospatial distribution of mercury emissions inventories

    Steenhuisen, Frits; Wilson, Simon J.

    Mercury is a global pollutant that poses threats to ecosystem and human health. Due to its global transport, mercury contamination is found in regions of the Earth that are remote from major emissions areas, including the Polar regions. Global anthropogenic emission inventories identify important

  17. European checkerspots (Melitaeini: Lepidoptera, Nymphalidae) are not aposematic – the point of view of great tits (Parus major)

    Tesařová, M. (ed.); Fric, Zdeněk; Veselý, P.; Konvička, Martin; Fuchs, R.

    2013-01-01

    Roč. 38, č. 2 (2013), s. 155-163 ISSN 0307-6946 Grant - others:University of South Bohemia(CZ) 144/2010/P; GA AV ČR(CZ) IAA601410803 Institutional support: RVO:60077344 Keywords : Euphydryas * Melitaea * Parus major Subject RIV: EH - Ecology, Behaviour Impact factor: 1.967, year: 2013 http://onlinelibrary.wiley.com/doi/10.1111/een.12001/pdf

  18. Web-Based Learning Enhancements: Video Lectures through Voice-Over PowerPoint in a Majors-Level Biology Course

    Lents, Nathan H.; Cifuentes, Oscar E.

    2009-01-01

    This study is an experimental introduction of web-based lecture delivery into a majors-level introductory biology course. Web-based delivery, achieved through the use of prerecorded Voice-Over PowerPoint video lectures, was introduced on a limited basis to an experimental section while a control group, with the same instructor, received standard…

  19. 1996, a turning point in the evolution of the EDF with good financial results; 1996, une annee charniere dans l'evolution d'EDF avec de bons resultants financiers

    NONE

    1997-03-01

    This conference held on March 1997 presents the financial results obtained in 1996 by French Electricity Company EDF (Electricite de France). This year represented a turning point because essential landmarks were established in 1996. An european directive has been adopted in 1996 defining the framework in which european electricity market will function as well as the rules for its opening to competition. Discussions with the trade unions were conducted at the beginning of 1997and a social agreement aiming at the amelioration of services and hiring of 11,000 to 15,000 young people in the next three years. Finally, a new contract of enterprise with the state has been discussed and approved in March 5, 1997, which redefined the place and the role of EDF in the French economy, in the new stage of electricity market started by the opening to competition. The document contains the following 8 chapters: 1. Financial results and enterprise management; 2. Institutional frame and the relation with the state; 3. Development in France; 4. International development; 5. Alliances, partnerships and cooperation; 6. Management, social and human resources; 7. Environment; 8. Technical results.

  20. 1996, a turning point in the evolution of the EDF with good financial results; 1996, une annee charniere dans l'evolution d'EDF avec de bons resultants financiers

    NONE

    1997-03-01

    This conference held on March 1997 presents the financial results obtained in 1996 by French Electricity Company EDF (Electricite de France). This year represented a turning point because essential landmarks were established in 1996. An european directive has been adopted in 1996 defining the framework in which european electricity market will function as well as the rules for its opening to competition. Discussions with the trade unions were conducted at the beginning of 1997and a social agreement aiming at the amelioration of services and hiring of 11,000 to 15,000 young people in the next three years. Finally, a new contract of enterprise with the state has been discussed and approved in March 5, 1997, which redefined the place and the role of EDF in the French economy, in the new stage of electricity market started by the opening to competition. The document contains the following 8 chapters: 1. Financial results and enterprise management; 2. Institutional frame and the relation with the state; 3. Development in France; 4. International development; 5. Alliances, partnerships and cooperation; 6. Management, social and human resources; 7. Environment; 8. Technical results.

  1. [Turning points in world history: urological comments on pathography of famous people: did Napoleon Bonaparte have a cystitis during the battle of Waterloo and was the battle lost because of that?].

    Hatzinger, M; Stastny, M; Haferkamp, A

    2011-03-01

    Apparently unimportant diseases of some prominent figures can have a considerable effect on the course of time at turning points in world history. It is quite conceivable that the Battle of Waterloo on 18 June 1815 had been lost by France because Napoleon was not in full possession of his powers, because he was suffering from acute cystitis. Adverse weather conditions with continuous rain and coldness in advance of the battle, extremely primitive hygienic conditions and more than simple quarters for the night led to the development of cystitis. Based on the records of his biographers, his personal physician and the letters to his brother, we know that Napoleon was not able to give the command to attack in the early morning as intended, but in the early noon, only because of his bad general condition. This delay of several hours led, as we all know, to the intervention of Prussia and the devastating defeat of France. Thus it appears that a relatively unimportant urological disease influenced the course of world history crucially.

  2. Superorganismality and caste differentiation as points of no return: how the major evolutionary transitions were lost in translation.

    Boomsma, Jacobus J; Gawne, Richard

    2018-02-01

    More than a century ago, William Morton Wheeler proposed that social insect colonies can be regarded as superorganisms when they have morphologically differentiated reproductive and nursing castes that are analogous to the metazoan germ-line and soma. Following the rise of sociobiology in the 1970s, Wheeler's insights were largely neglected, and we were left with multiple new superorganism concepts that are mutually inconsistent and uninformative on how superorganismality originated. These difficulties can be traced to the broadened sociobiological concept of eusociality, which denies that physical queen-worker caste differentiation is a universal hallmark of superorganismal colonies. Unlike early evolutionary naturalists and geneticists such as Weismann, Huxley, Fisher and Haldane, who set out to explain the acquisition of an unmated worker caste, the goal of sociobiology was to understand the evolution of eusociality, a broad-brush convenience category that covers most forms of cooperative breeding. By lumping a diverse spectrum of social systems into a single category, and drawing attention away from the evolution of distinct quantifiable traits, the sociobiological tradition has impeded straightforward connections between inclusive fitness theory and the major evolutionary transitions paradigm for understanding irreversible shifts to higher organizational complexity. We evaluate the history by which these inconsistencies accumulated, develop a common-cause approach for understanding the origins of all major transitions in eukaryote hierarchical complexity, and use Hamilton's rule to argue that they are directly comparable. We show that only Wheeler's original definition of superorganismality can be unambiguously linked to irreversible evolutionary transitions from context-dependent reproductive altruism to unconditional differentiation of permanently unmated castes in the ants, corbiculate bees, vespine wasps and higher termites. We argue that strictly

  3. The Translator's Turn: in the Cultural Turn

    徐玮玮

    2003-01-01

    @@ Introduction: Douglas Robinson rose to the defense of the " atheoretical" American literary translator in The Translator's Turn (1991). Here, I borrowed the title from him, but I will write my paper in the thought of the translator's role in translating. In his book, Robinson argued that the literary translator embodies an integration of feeling and thought, of intuition and systematization. In analyzing the " turn" that the translator take from the source text to the target text, Robinson offered a " dialogical" model, that is the translator's dialogical engagement with the source language and with the ethic of the target language. Robinson allows for the translator to intervene, subvert, divert, even entertain, emphasizing the creative aspect of literary translation. The translation linguists, scientists, and philosophers have had their chance at translation theory; now it is time, he argued, for the literary translators to have their " turn".

  4. Hurricane Andrew causes major oil spill at Florida Power ampersand Light Company's Turkey Point Power Plant, Homestead, Florida

    Jones, M.A.; Butts, R.L.; Lindsay, J.R.; McCully, B.S.; Pickering, T.H.

    1993-01-01

    On August 24, 1992, Hurricane Andrew slammed into South Florida with wind gusts in excess of 160 mph. At 4:00 a.m. that day, the eye of this category four storm passed over Florida Power ampersand Light Company's Turkey Point power plant, south of Miami. Although the plant's two nuclear units escaped any significant damage, the storm caused extensive destruction to buildings and transmission facilities, and damaged two 400 foot tall emission stacks associated with the site's two fossil fuel generating units. In addition, a 90,000 to 110,000 gallon spill of No. 6 fuel oil resulted when a piece of wind-blown debris punctured the steel of the unit One 12,000 barrel fuel oil metering tank approximately 30 feet up from the tank bottom. Despite the presence of a secondary containment structure around the tank, the intense wind blew oil throughout the plant site. The damage to the metering tank apparently occurred during the first half hour of the hurricane. As the tank's oil level fell due to the puncture, transfer pumps from the bulk oil storage tanks received a low level alarm which automatically began transferring oil to the damaged metering tank. To prevent the further discharge of oil, plant personnel entered the power block and secured the pumps during the passage of the hurricane eye. Immediately following the storm, facility personnel deployed booms across the barge canal and the Units 1 and 2 intake canal to contain the oil which had entered the water. The response strategy and implementation is described in detail. The remediation costs were approximately $14/gallon spilled, including 54,000 gallons recovered for electricity generation

  5. Cognitive and emotional processing of pleasant and unpleasant experiences in major depression: A matter of vantage point?

    Pfaltz, Monique C; Wu, Gwyneth W Y; Liu, Guanyu; Tankersley, Amelia P; Stilley, Ashley M; Plichta, Michael M; McNally, Richard J

    2017-03-01

    In nonclinical populations, adopting a third-person perspective as opposed to a first-person perspective while analyzing negative emotional experiences fosters understanding of these experiences and reduces negative emotional reactivity. We assessed whether this generalizes to people with major depression (MD). Additionally, we assessed whether the emotion-reducing effects of adopting a third-person perspective also occur when subjects with MD and HC subjects analyze positive experiences. Seventy-two MD subjects and 82 HC subjects analyzed a happy and a negative experience from either a first-person or a third-person perspective. Unexpectedly, we found no emotion-reducing effects of third-person perspective in either group thinking about negative events. However, across groups, third-person perspective was associated with less recounting of negative experiences and with a clearer, more coherent understanding of them. Negative affect decreased and positive affect increased in both groups analyzing happy experiences. In MD subjects, decreases in depressive affect were stronger for the third-person perspective. In both groups, positive affect increased and negative affect decreased more strongly for the third-person perspective. While reflecting on their positive memory, MD subjects adopted their assigned perspective for a shorter amount of time (70%) than HC subjects (78%). However, percentage of time participants adopted their assigned perspective was unrelated to the significant effects we found. Both people suffering from MD and healthy individuals may benefit from processing pleasant experiences, especially when adopting a self-distant perspective. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Diamond turning of thermoplastic polymers

    Smith, E.; Scattergood, R.O.

    1988-12-01

    Single point diamond turning studies were made using a series of thermoplastic polymers with different glass transition temperatures. Variations in surface morphology and surface roughness were observed as a function of cutting speed. Lower glass transition temperatures facilitate smoother surface cuts and better surface finish. This can be attributed to the frictional heating that occurs during machining. Because of the very low glass transition temperatures in polymeric compared to inorganic glasses, the precision machining response can be very speed sensitive.

  7. Does the European natural gas market pass the competitive benchmark of the theory of storage? Indirect tests for three major trading points

    Stronzik, Marcus; Rammerstorfer, Margarethe; Neumann, Anne

    2009-01-01

    This paper presents the first comparative analysis of the relationship between natural gas storage utilization and price patterns at three major European trading points. Using two indirect tests developed by that are applied in other commodity markets, we impose the no arbitrage condition to model the efficiency of the natural gas market. The results reveal that while operators of European storage facilities realize seasonal arbitrage profits, substantial arbitrage potentials remain. We suggest that the indirect approach is well suited to provide market insights for periods with limited data. We find that overall market performance differs substantially from the competitive benchmark of the theory of storage. (author)

  8. Review Essay: Turn, Turn, Turn Around—Till Categories Blur

    Lars Allolio-Näcke

    2008-01-01

    Full Text Available I begin this review by introducing the book and discussing its manifest content chapter by chapter (see 2.1, focusing particularly on the author's argumentation concerning the development of new orientations in cultural studies and on how, in relation to the turns discussed, the names of the researchers and central categories involved are collected. In a second step, I give a close reading of the book's latent content, which I consider to be more important (see 2.2. In this context I discuss several questions of scientific politics—especially the issue of hegemonic claims. Thirdly, I read the book from the critical standpoint of a psychologist, a sociologist and a theologian and show the shortcomings of BACHMANN-MEDICK's outsider perspective on these disciplines. In this regard I read the book again and provide a critique of the quality of the author's scientific performance (see 3. Finally, I state the reasons I do not recommend reading this book (see 4. URN: urn:nbn:de:0114-fqs0801266

  9. Turn-around improvements

    Redaelli, S.; Venturini Delsolaro, W.

    2012-01-01

    An efficient turn-around will be an important parameter for the integrated luminosity performance at LHC in 2012, when an operation with steady beam parameters and machine configuration will be achieved at the beginning of the run. Improvements of the operational cycle were already put successfully in place after the 2010 experience but additional ways to reduce the time required to setup collisions are possible. In this paper, the 2011 turn-around performance is reviewed and the benefits of the improvements from 2010 are presented. Phases of the operational cycle when further amelioration is possible are discussed and some proposal for a faster turn-around in 2012 are outlined. (authors)

  10. Major and Trace Element Fluxes to the Ganges River: Significance of Small Flood Plain Tributary as Non-Point Pollution Source

    Lakshmi, V.; Sen, I. S.; Mishra, G.

    2017-12-01

    There has been much discussion amongst biologists, ecologists, chemists, geologists, environmental firms, and science policy makers about the impact of human activities on river health. As a result, multiple river restoration projects are on going on many large river basins around the world. In the Indian subcontinent, the Ganges River is the focal point of all restoration actions as it provides food and water security to half a billion people. Serious concerns have been raised about the quality of Ganga water as toxic chemicals and many more enters the river system through point-sources such as direct wastewater discharge to rivers, or non-point-sources. Point source pollution can be easily identified and remedial actions can be taken; however, non-point pollution sources are harder to quantify and mitigate. A large non-point pollution source in the Indo-Gangetic floodplain is the network of small floodplain rivers. However, these rivers are rarely studied since they are small in catchment area ( 1000-10,000 km2) and discharge (knowledge gap we have monitored the Pandu River for one year between February 2015 and April 2016. Pandu river is 242 km long and is a right bank tributary of Ganges with a total catchment area of 1495 km2. Water samples were collected every month for dissolved major and trace elements. Here we show that the concentration of heavy metals in river Pandu is in higher range as compared to the world river average, and all the dissolved elements shows a large spatial-temporal variation. We show that the Pandu river exports 192170, 168517, 57802, 32769, 29663, 1043, 279, 241, 225, 162, 97, 28, 25, 22, 20, 8, 4 Kg/yr of Ca, Na, Mg, K, Si, Sr, Zn, B, Ba, Mn, Al, Li, Rb, Mo, U, Cu, and Sb, respectively, to the Ganga river, and the exported chemical flux effects the water chemistry of the Ganga river downstream of its confluence point. We further speculate that small floodplain rivers is an important source that contributes to the dissolved chemical

  11. Diamond turning machine controller implementation

    Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

    1988-12-01

    The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

  12. Turning breech babies after 34 weeks: the if, how, & when of turning breech babies.

    Cohain, Judy Slome

    2007-01-01

    Techniques for turning a term breech baby are 1). External cephalic version (ECV) using hands and ultrasound only; 2). Acupuncture point stimulation, by needle or moxibustion; 3). Chiropractic "Webster" technique; 4). Hypnotherapy; and 5). Special exercises. Fifty % of breech fetuses at 34 weeks will turn by themselves to head down by 38 weeks. Therefore, to be considered effective, a technique for turning breech must turn the baby and keep it turned more than 50% of the time. Only ECV with an experienced practitioner has been documented to have a greater than 50% success rate at 37 weeks; in 95% of cases the head stays down. Most women experience the fetus turning by hand as quick but very painful. "Unstable lie" is sometimes used as a baseless excuse for inducing labor after the baby turns from breech to head down. (judyslome@hotmail.com).

  13. Turning to alcohol?

    Reiboro, S.K.

    1998-01-01

    Brazil is examining whether turning to alcohol could solve its problems. The fuel alcohol producers are lobbying hard for the government to increase the use of alcohol to fuel the country's cars. Not only does using alcohol reduce CO 2 , runs the argument, but the Kyoto agreement might just attract international financing for the project. (author)

  14. Hydrodynamics of Turning Flocks

    Yang, Xingbo; Marchetti, M. Cristina

    2014-01-01

    We present a hydrodynamic model of flocking that generalizes the familiar Toner-Tu equations to incorporate turning inertia of well-polarized flocks. The continuum equations controlled by only two dimensionless parameters, orientational inertia and alignment strength, are derived by coarse graining the inertial spin model recently proposed by Cavagna et al. The interplay between orientational inertia and bend elasticity of the flock yields anisotropic spin waves that mediate the propagation o...

  15. CONNECTION OF TURN AHEAD AND TURN BACK WITH MOTORIC ABILITIES OF THE FIFTH GRADE STUDENTS

    Jovica Petković

    2006-06-01

    Full Text Available The research is done for the purpose of determination and defining of the level of connection between some motoric abilities with success in realization of programmed contents from the area of gymnastics (turn ahead and turn back. The research is done on the sample of fifty one students from the fifth grade of Elementary School, on ten motoric tests and on two specific motoric assignments – turn ahead and turn back. The results of this research clearly point that there exist the multitude of statistically important coefficients of correlation between treated motoric abilities and applied motoric assignments.

  16. Turning lead into gold

    Jensen, Steffen Moltrup Ernø

    For years the field of entrepreneurship has been blinded by the alchemical promise of turning lead into gold, of finding the ones most likely to become the next Branson, Zuckerberg or Gates. The promise has been created in the midst of political and scientific agendas where certain individuals...... is not to accumulate state or market wealth, but for entrepreneurial skills to become tools towards the liberation of the individual from oppressive systems of control – essentially to add public value rather than economic value. In this presentation I will sketch an anarchist perspective on entrepreneurship, looking...

  17. Headache: an important factor associated with muscle soreness/pain at the two-year follow-up point among patients with major depressive disorder.

    Hung, Ching-I; Liu, Chia-Yih; Yang, Ching-Hui; Wang, Shuu-Jiun

    2016-01-01

    No study has compared the associations of headache, anxiety, and depression at baseline with muscle soreness or pain (MS/P) at baseline and at the two-year follow-up point among outpatients with major depressive disorder (MDD). This study aimed to investigate the above issue. This study enrolled 155 outpatients with MDD at baseline, and 131 attended a two-year follow-up appointment. At baseline, migraine was diagnosed based on the International Classification of Headache Disorders, 2(nd) edition. MDD and anxiety disorders were diagnosed using the Structured Clinical Interview for DSM-IV-TR. The visual analog scale was used to evaluate the intensities of headache and MS/P in the neck, shoulder, back, upper limbs, and lower limbs. Depression and anxiety were evaluated using the Hospital Anxiety and Depression Scale. Multiple linear regressions were used to compare the associations of these factors with MS/P. Compared with anxiety disorders, migraine was more strongly associated with MS/P in all areas at baseline and in the upper and lower limbs at follow-up. Headache intensity at baseline was the factor most strongly associated with MS/P in all areas at baseline and follow-up after controlling for depression and anxiety. Headache intensity at baseline predicted MS/P at baseline and follow-up. Migraine and headache intensity are important factors related to MS/P at baseline and follow-up among patients with MDD. Integrating depression and headache treatment might be indicated to improve MS/P.

  18. Effects of Point Mutations in the Major Capsid Protein of Beet Western Yellows Virus on Capsid Formation, Virus Accumulation, and Aphid Transmission

    Brault, V.; Bergdoll, M.; Mutterer, J.; Prasad, V.; Pfeffer, S.; Erdinger, M.; Richards, K. E.; Ziegler-Graff, V.

    2003-01-01

    Point mutations were introduced into the major capsid protein (P3) of cloned infectious cDNA of the polerovirus beet western yellows virus (BWYV) by manipulation of cloned infectious cDNA. Seven mutations targeted sites on the S domain predicted to lie on the capsid surface. An eighth mutation eliminated two arginine residues in the R domain, which is thought to extend into the capsid interior. The effects of the mutations on virus capsid formation, virus accumulation in protoplasts and plants, and aphid transmission were tested. All of the mutants replicated in protoplasts. The S-domain mutant W166R failed to protect viral RNA from RNase attack, suggesting that this particular mutation interfered with stable capsid formation. The R-domain mutant R7A/R8A protected ∼90% of the viral RNA strand from RNase, suggesting that lower positive-charge density in the mutant capsid interior interfered with stable packaging of the complete strand into virions. Neither of these mutants systemically infected plants. The six remaining mutants properly packaged viral RNA and could invade Nicotiana clevelandii systemically following agroinfection. Mutant Q121E/N122D was poorly transmitted by aphids, implicating one or both targeted residues in virus-vector interactions. Successful transmission of mutant D172N was accompanied either by reversion to the wild type or by appearance of a second-site mutation, N137D. This finding indicates that D172 is also important for transmission but that the D172N transmission defect can be compensated for by a “reverse” substitution at another site. The results have been used to evaluate possible structural models for the BWYV capsid. PMID:12584348

  19. Fermilab turns 50! Congratulations!

    Staff Association

    2017-01-01

    This year Fermilab turns 50 and the celebrations are ongoing. The ties between CERN and Fermilab are numerous and have been ranging from competition between two labs at the forefront of their field, e.g. with the chase of the top quark, finally discovered by Fermilab, to outright collaboration, e.g. on LHC low-beta quadrupole magnet development and production and in the CMS collaboration. In June, in the name of the CERN staff and scientific community, the CERN Staff Association sent a message to the Fermilab staff and scientific community, through Dr. Nigel Lockyer, Fermilab Director. The letter, and the assurance from Nigel Lockyer that the message has been passed onto the Fermilab community can be found on our website. Congratulations to Fermilab on its fiftieth Anniversary, and to the staff and collaborators who made this laboratory through their hard work, dedication and vision!

  20. History of Education in Canada: Historiographic "Turns" and Widening Horizons

    Bruno-Jofré, Rosa

    2014-01-01

    This paper explores major historiographic "turns" in history of education with a focus, although not exclusively, on English-speaking Canada. It addresses the transformative intellectual impact of the turn toward social history on the history of education, the impact of cultural history and the linguistic turn, the reception of Michel…

  1. Turn by Turn Measurements at the KEK-ATF

    Renier, Y; Tomas, R; Wendt, M; Eddy, N; Kubo, K; Kuroda, S; Naito, T; Okugi, T; Terunuma, N; Urakawa, J

    2013-01-01

    The ATF damping ring has been upgraded with new read-out electronics for the beam position monitors (BPM), capable to acquire the beam orbits on a turn-by-turn basis, as well as in a high resolution averaging mode. The new BPM system allows to improve optic corrections and to achieve an even smaller vertical emittance (<2pm). Experimental results are presented based on turn-by-turn beam orbit measurements in the ring, for estimating the β functions and dispersion along the lattice. A fast method to measure spectral line amplitude in a few turns is also presented, including the evaluation of chromaticity.

  2. Turning to the sun

    Jai Narain Prasad Nishad

    1997-01-01

    The importance of the increasing use of renewable energy sources was recognized in India in the early 1970s. During the past quarter century, a significant effort has gone into the development, trial and induction of a variety of technologies for use in different sectors. Today, india has one of th world's largest programmes for renewable energy. Our activities cover all teh major renewable energy sources of interest to us, including biogas, biomass, solar, wind and small-hydro power and other emerging technologies. Several systems and products are now commercially available, and are economically viable in comparison to fossil fuels

  3. N. Chomsky am Wendepunkt (N. Chomsky at the Turning Point)?

    Weisgerber, Leo

    1971-01-01

    Questions Chomsky's postulation of an innate capacity for language use, and suggests that Chomsky is modifying his theory by including the time factor in his consideration of language acquisition. (RS)

  4. Wind Power: A Turning Point. Worldwatch Paper 45.

    Flavin, Christopher

    Recent studies have shown wind power to be an eminently practical and potentially substantial source of electricity and direct mechanical power. Wind machines range from simple water-pumping devices made of wood and cloth to large electricity producing turbines with fiberglass blades nearly 300 feet long. Wind is in effect a form of solar…

  5. FOOD VS. FUEL – A TURNING POINT FOR BIOETHANOL?

    Katharina Harlander

    2008-09-01

    Full Text Available Recently concerns have been raised that biofuels would affect food prices. Bioethanol is made from sugar or starch containing plants that are also used in food production. In public perception this led to an emotional resistance against biofuels that in real terms is not substantiated. Generally, biofuels are a political product. Triggered by the oil crisis in the early 1970ies national fuel ethanol programmes were first launched in Brazil and in the United States. Concerns regarding energy security and sustainability together with the option of new markets for surplus agricultural production in recent years led to similar policy measures in the European Union and in numerous countries around the globe. Accordingly the industry invested heavily in new bioethanol plants - especially in the US – and created an additional demand for corn and wheat with some record-breaking prices noted in late 2007. A look back into statistics shows a drastic decline of real prices for decades and by now they are only back at the level of 30 years ago. One important detail is the real portion of grain used for bioethanol, which is still only 1.6 percent in the EU and therefore unlikely to be the real driver for the price development. Moreover the share of raw material is up to 70% of bioethanol production cost that makes the bioethanol industry itself a victim of price increases. Subsequently investor interest in this field slowed down, a development also watched in the US. The prospects of the agricultural markets of the European Commission conclude that Europe can do both, nutrition and biofuels.

  6. Turning Points: Improving Honors Student Preparation for Thesis Completion

    Patino, Cynthia

    2012-01-01

    This dissertation is an action research study that had as its primary goal to increase retention of honors college students at Arizona State University by implementing an additional advising session during the fifth semester of their academic career. Introducing additional, strategically-timed support for the honors thesis and demystifying the…

  7. The Battle of Moscow - Turning Point of World War II

    V M Falin

    2015-12-01

    Full Text Available The article is dedicated to the Battle of Moscow in October- December, 1941. Author analyzes the causes of the failure of German army, who tries to encircle and capture Moscow, the events taking place on the outskirts of Moscow, German troops attempts to encircle Moscow. The author presents data on the speech by Adolf Hitler in Berlin on October 5, 1941, in which he acknowledged the failure of the Blitzkrieg and the Battle for Moscow and its suburbs. The researcher uses the documents of the Wehrmacht High Command, which stated that after the Battle of Moscow, German troops could not on any further stage of the war to restore the quality and morale of the armed forces, with whom Reich rushed to a campaign for world domination. The author, a prominent public and political figure of the USSR, also relies on personal recollections, interviews with prominent generals of World War II, including I. Konev.

  8. Socialization Turning Points: An Examination of Change in Organizational Identification.

    Bullis, Connie; Bach, Betsy Wackernagel

    To examine perspectives of change in individual-organizational socialization, a study used the retrospective interview technique (RIT) to reconstruct the history and process of individuals' socialization experiences over an 8-month period. Using the RIT, researchers asked subjects, 28 entering graduate students enrolled in three communication…

  9. Thirteen and two fairy tales on the energy turning point

    Keil, Guenter

    2011-01-01

    Inspired by the choices and changes in the German energy policy, the author proposes controversial texts under the form of tales on the German policy and situation regarding energy. These tales ironically address the German energy model, the uselessness of the seven stopped nuclear power plants, the low cost of the energy turnaround made by the German government, the environmental benefit of renewable energies, the high potential of energy savings, the new means of electricity storage, the electric car as means to store electricity, the low cost of solar energy ('Sun does not send any bill'), the wind energy (the wind turbine fleet in such place can supply so much households), the geothermal energy, the so-called technological leap, the benefit of decentralized energy production, the numerous jobs created by renewable energies, the ecologic electric current, and the search for a final nuclear waste disposal site

  10. Averroes' Physics A Turning Point in Medieval Natural Philosophy

    Glasner, Ruth

    2009-01-01

    Ruth Glasner presents an illuminating reappraisal of Averroes' physics. Glasner is the first scholar to base her interpretation on the full range of Averroes' writings, including texts that are extant only in Hebrew manuscripts and have not been hitherto studied. She reveals that Averroes changed his interpretation of the basic notions of physics - the structure of corporeal reality and the definition of motion - more than once. After many hesitations he offers a bold newinterpretation of physics which Glasner calls 'Aristotelian atomism'. Ideas that are usually ascribed to scholastic scholars

  11. Adaptation Turning Points in River Restoration? The Rhine salmon case

    Bölscher, T.; Slobbe, van E.J.J.; Vliet, van M.T.H.; Werners, S.E.

    2013-01-01

    Abstract: Bringing a sustainable population of Atlantic salmon (Salmo salar) back into the Rhine, after the species became extinct in the 1950s, is an important environmental ambition with efforts made both by governments and civil society. Our analysis finds a significant risk of failure of salmon

  12. The turning point in the number of traffic fatalities

    Brüde, Ulf; Elvik, Rune

    2015-01-01

    than before. Such a change would suggest that road safety policy became more effective. Analysis of data for six countries (Denmark, Great Britain, Netherlands, Norway, Sweden, United States) lends stronger support to the latter hypothesis than to the former. The lesson for policy makers, in particular...

  13. Butane/Propane. An economical and technical turning point

    Fridman, G.

    1998-01-01

    During 1997, the sales of all energies dropped. Even for the liquid fuel, its consumption came back under the level of three million tons. To fight this regression, liquid fuels producers innovate in the cisterns and the bottles and carry on their efforts in logistic matters. Hopes are allowed thanks to the new taxing and the demand increasing in the car industry, for liquid fuels. (A.L.B.)

  14. Sandstone Turning by Abrasive Waterjet

    Hlaváček, Petr; Cárach, J.; Hloch, Sergej; Vasilko, K.; Klichová, Dagmar; Klich, Jiří; Lehocká, D.

    2015-01-01

    Roč. 48, č. 6 (2015), s. 2489-2493 ISSN 0723-2632 R&D Projects: GA MŠk ED2.1.00/03.0082; GA MŠk(CZ) LO1406 Institutional support: RVO:68145535 Keywords : turning away from the jet * conventional turning towards the jet * sandstone * abrasive water jet Subject RIV: JQ - Machines ; Tools Impact factor: 2.386, year: 2015 http://www.springerprofessional.de/sandstone-turning-by-abrasive-waterjet/6038028.html

  15. Analysis of effects on plant performance by major measuring points in the secondary systems of Kori nuclear power plant units 3 and 4

    Lee, Jung Woon; Park, Jae Chang; Lee, Jung Woon; Kim, Jung Taek; Chang, Soon Heung; Lee, Gwang Gu; Heo, Gyun Young; Lee, Sung Jin; Han, Kyu Hyun; Shin, Byung Soo

    2003-06-01

    In this study, correlation analysis was achieved for the major sensor position and the behavior of secondary system in Kori NPP unit 3, 4. Using the data from simulation model, the correlation between sensor position and electrical output, the correlation between sensor position and heat rate, and the correlation between different sensor positions were analyzed. On the basis of study results, a performance evaluation model was proposed, which can carry out secondary system performance diagnosis

  16. When rescuers turn captors.

    Bryant, A

    1996-01-01

    An article appeared in the January 11, 1996, edition of the Indian Express reporting police harassment and hafta collection from child sex workers in Mumbai's red-light districts. Findings are based upon an Indian Health Organization (IHO) study. On January 17, 1996, the Bombay High Court ordered police to liberate underage sex workers from the brothels. 50 simultaneous raids subsequently occurred over a one-hour period. Following their release, the girls were moved to various institutional homes in Mumbai and tested for infection with HIV. These tests were conducted without the individuals' consent and the results have yet to be released. Many of the girls have been transferred to institutions in their home states, while 260 of the 437 girls rescued in the operation remain in Mumbai, living in squalid conditions in various institutional homes. They are denied freedom of movement and have been subject to disease since being taken into custody. An estimated 60-70% of the girls in custody are HIV-positive and have other sexually transmitted diseases as well as pulmonary tuberculosis. Many need immediate medical care, especially those who are pregnant. Being uprooted from their routines and not knowing why they are incarcerated has also caused considerable psychological duress among the girls. They face discrimination from both staff in the shelters and in the municipal hospitals. Nongovernmental organizations have generally assumed the responsibility of caring for the girls. The majority of rescued girls still in shelter homes in Mumbai are from Nepal; the government of Nepal refuses to repatriate them for fear that they are HIV-seropositive.

  17. A single point in protein trafficking by Plasmodium falciparum determines the expression of major antigens on the surface of infected erythrocytes targeted by human antibodies.

    Chan, Jo-Anne; Howell, Katherine B; Langer, Christine; Maier, Alexander G; Hasang, Wina; Rogerson, Stephen J; Petter, Michaela; Chesson, Joanne; Stanisic, Danielle I; Duffy, Michael F; Cooke, Brian M; Siba, Peter M; Mueller, Ivo; Bull, Peter C; Marsh, Kevin; Fowkes, Freya J I; Beeson, James G

    2016-11-01

    Antibodies to blood-stage antigens of Plasmodium falciparum play a pivotal role in human immunity to malaria. During parasite development, multiple proteins are trafficked from the intracellular parasite to the surface of P. falciparum-infected erythrocytes (IEs). However, the relative importance of different proteins as targets of acquired antibodies, and key pathways involved in trafficking major antigens remain to be clearly defined. We quantified antibodies to surface antigens among children, adults, and pregnant women from different malaria-exposed regions. We quantified the importance of antigens as antibody targets using genetically engineered P. falciparum with modified surface antigen expression. Genetic deletion of the trafficking protein skeleton-binding protein-1 (SBP1), which is involved in trafficking the surface antigen PfEMP1, led to a dramatic reduction in antibody recognition of IEs and the ability of human antibodies to promote opsonic phagocytosis of IEs, a key mechanism of parasite clearance. The great majority of antibody epitopes on the IE surface were SBP1-dependent. This was demonstrated using parasite isolates with different genetic or phenotypic backgrounds, and among antibodies from children, adults, and pregnant women in different populations. Comparisons of antibody reactivity to parasite isolates with SBP1 deletion or inhibited PfEMP1 expression suggest that PfEMP1 is the dominant target of acquired human antibodies, and that other P. falciparum IE surface proteins are minor targets. These results establish SBP1 as part of a critical pathway for the trafficking of major surface antigens targeted by human immunity, and have key implications for vaccine development, and quantifying immunity in populations.

  18. Turning collectors for solar radiation

    Barak, Amitzur Z.

    1976-01-01

    A device is provided for turning a solar collector about the polar axis so that the collector is directed toward the sun as the sun tracks the sky each day. It includes two heat-expansive elements and a shadow plate. In the morning a first expansive element is heated, expands to turn the collector to face the sun, while the second expansive element is shaded by the plate. In the afternoon the second element is heated, expands to turn the collector to face the sun, while the first is shaded by the plate.

  19. Train turn restrictions and line plan performance

    Burggraeve, Sofie; Bull, Simon Henry; Lusby, Richard Martin

    In this paper we study the impact of the `turn conditions' in end stations on the performance of a line plan. If trains have to turn on their platform in an end station, the yoccupy the platform for several minutes. A more preferred option, from a timetabling point of view, would be that a train...... in a exible and large enough shunt. Starting from a given line plan, we compare two timetables, one where trains have to turn on their platform and one where trains can turn in a shunt. We evaluate the impact on the performance of the line plan by its feasibility for timetabling,the minimum overall buffer...... disappears from the platform in its end station after dwelling and only appears again when departing for a subsequent trip. In this case, the train will not interfere with other trains that dwell on the platform during the time between these events. However, this option is only possible if the train can stay...

  20. Turning around Newton's Second Law

    Goff, John Eric

    2004-01-01

    Conceptual and quantitative difficulties surrounding Newton's second law often arise among introductory physics students. Simply turning around how one expresses Newton's second law may assist students in their understanding of a deceptively simple-looking equation.

  1. Diamond turning of Si and Ge single crystals

    Blake, P.; Scattergood, R.O.

    1988-12-01

    Single-point diamond turning studies have been completed on Si and Ge crystals. A new process model was developed for diamond turning which is based on a critical depth of cut for plastic flow-to-brittle fracture transitions. This concept, when combined with the actual machining geometry for single-point turning, predicts that {open_quotes}ductile{close_quotes} machining is a combined action of plasticity and fracture. Interrupted cutting experiments also provide a meant to directly measure the critical depth parameter for given machining conditions.

  2. The ontological turn meets the certainty of death.

    McDonald, Maryon

    2017-08-01

    The 'ontological turn' involves some anthropological points of long standing but the approaches recently coordinated into this turn have been presented as a 'call to arms', as shaking up 'mono-realist singularities' and as inherently political. This fighting talk has no doubt made important contributions to anthropology and insights from the ontological turn can help in anthropological understandings of medical practices. However, this paper contends that this helpfulness is also limited and that a call to arms may be inappropriate. This point is made through an ethnographic understanding of medical concern about the diagnosis of death.

  3. What 'empirical turn in bioethics'?

    Hurst, Samia

    2010-10-01

    Uncertainty as to how we should articulate empirical data and normative reasoning seems to underlie most difficulties regarding the 'empirical turn' in bioethics. This article examines three different ways in which we could understand 'empirical turn'. Using real facts in normative reasoning is trivial and would not represent a 'turn'. Becoming an empirical discipline through a shift to the social and neurosciences would be a turn away from normative thinking, which we should not take. Conducting empirical research to inform normative reasoning is the usual meaning given to the term 'empirical turn'. In this sense, however, the turn is incomplete. Bioethics has imported methodological tools from empirical disciplines, but too often it has not imported the standards to which researchers in these disciplines are held. Integrating empirical and normative approaches also represents true added difficulties. Addressing these issues from the standpoint of debates on the fact-value distinction can cloud very real methodological concerns by displacing the debate to a level of abstraction where they need not be apparent. Ideally, empirical research in bioethics should meet standards for empirical and normative validity similar to those used in the source disciplines for these methods, and articulate these aspects clearly and appropriately. More modestly, criteria to ensure that none of these standards are completely left aside would improve the quality of empirical bioethics research and partly clear the air of critiques addressing its theoretical justification, when its rigour in the particularly difficult context of interdisciplinarity is what should be at stake.

  4. CONNECTION OF TURN AHEAD AND TURN BACK WITH MOTORIC ABILITIES OF THE FOURTH GRADE OF HIGH SCHOOL

    Jovica Petković

    2008-08-01

    Full Text Available The research is done for the purpose of determination and defining of the level of connection between some motoric abilities with success in realization of programmed contents from the area of gymnastics (turn ahead and turn back. The research is done on the sample of fifty students from the fourth grade of High School, on ten motoric tests and on two specific motoric assignments – turn ahead and turn back. The results of this research clearly point that there exist the multitude of statistically important coefficients of correlation between treated motoric abilities and applied motoric assignments.

  5. Turning a page of Agency history

    NONE

    1969-07-01

    Recent developments, and especially the new and critical interest of developing countries, have helped to mark the turning of a page in the Agency's history. If the present situation in the economics of nuclear power does not change there is a danger that developing countries will lag further and further behind the advanced countries in its use. Shortage of resources impose a brake on Agency efforts to promote benefits of nuclear techniques, especially by technical assistance. These were some of the points made by Dr. Sigvard Eklund, the Director General, when he presented the Agency's annual report to the Economic and Social Council (ECOSOC) in July. (author)

  6. Os pontos de virada na formação do professor universitário: um estudo sobre o mecanismo da identificação The "turning points" in the formation of the university teacher: a study of the mechanism of identification

    Claudia Rosa Riolfi

    2007-08-01

    Full Text Available O presente artigo tem como objeto a formação do professor universitário. Volta-se para a elucidação das seguintes questões: a os avanços para a compreensão da natureza do percurso a ser trilhado para que se instale, no professor universitário em formação, um desejo que encontre seu norte no ato de ensinar que são possíveis de se levar em consideração, ao tomar em consideração a psicanálise lacaniana; e b a configuração dos pontos de virada por meio dos quais um sujeito em formação vem a construir um lugar singular de onde possa criar um trabalho próprio de professor universitário. Postula a necessidade do ultrapassamento do que estamos chamando de pontos de virada para que aquele que está em um percurso de formação, para se tornar professor universitário, possa vir a criar um espaço próprio para o exercício da docência, fundando, portanto, a possibilidade da re-invenção de um si próprio. Para tal fim, estamos recorrendo ao conceito de identificação - tal qual é visto na psicanálise de orientação lacaniana - para elucidar a experiência decorrida no âmbito do Programa de Aperfeiçoamento de Ensino (PAE, ao longo de 2005, em duas disciplinas (cujos alunos são prioritariamente oriundos da graduação em Lingüística da Faculdade de Filosofia, Letras e Ciências Humanas da USP, que têm a carga horária de 120 horas cada uma (60 em sala de aula e 60 de estágio supervisionado.This article takes as its object the formation of the university teacher, turning its attention to the elucidation of the following issues: a the developments in the understanding of the nature of the path to be followed so as to instill in the university teacher under formation a will oriented towards the act of teaching, developments that can be assessed from the perspective of Lacanian psychoanalysis; and b the configuration of "turning points" after which a subject under formation builds a singular place where it is possible to

  7. The turn team: a novel strategy for reducing pressure ulcers in the surgical intensive care unit.

    Still, Mary D; Cross, Linda C; Dunlap, Martha; Rencher, Rugenia; Larkins, Elizabeth R; Carpenter, David L; Buchman, Timothy G; Coopersmith, Craig M

    2013-03-01

    Pressure ulcers cause significant morbidity and mortality in the surgical intensive care unit (SICU). The purpose of this study was to determine if a dedicated team tasked with turning and repositioning all hemodynamically stable SICU patients could decrease the formation of pressure ulcers. A total of 507 patients in a 20-bed SICU in a university hospital were assessed for pressure ulcers using a point prevalence strategy, between December 2008 and September 2010, before and after implementation of a team tasked with turning and repositioning all hemodynamically stable patients every 2 hours around the clock. At baseline, when frequent turning was encouraged but not required, a total of 42 pressure ulcers were identified in 278 patients. After implementation of the turn team, a total of 12 pressure ulcers were identified in 229 patients (p < 0.0001). The preintervention group included 34 stage I and II ulcers and 8 higher stage ulcers. After implementation of the turn team, there were 7 stage I and II ulcers and 5 higher stage ulcers. The average Braden score was 16.5 in the preintervention group and 13.4 in the postintervention group (p = 0.04), suggesting that pressure ulcers were occurring in higher risk patients after implementation of the turn team. A team dedicated to turning SICU patients every 2 hours dramatically decreased the incidence of pressure ulcers. The majority of stage I and stage II ulcers appear to be preventable with an aggressive intervention aimed at pressure ulcer prevention. Copyright © 2013 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

  8. Turn Management or Impression Management?

    ter Maat, Mark; Heylen, Dirk K.J.; Ruttkay, Z.M.; Kipp, M.; Nijholt, Antinus; Vilhjálmsson, H.H.

    2009-01-01

    We look at how some basic choices in the management of turns influence the impression that people get from an agent. We look at scales concerning personality, emotion and interpersonal stance. We do this by a person perception study, or rather an agent perception study, using simulated conversations

  9. Professional Employees Turn to Unions

    Chamot, Dennis

    1976-01-01

    White-collar and professional employees are increasingly turning to unions to combat their loss of independence as employees of large organizations. Managers should realize that they and professional employees have different viewpoints about job situations and that the current trend toward white-collar unionism is apt to continue. (JG)

  10. Why Does Hair Turn Gray?

    ... out, but people with naturally lighter hair are just as likely to go gray. From the time a person notices a few gray hairs, it may take more than 10 years for all of that person's hair to turn ... really believe that this happens. Just in case, try not to freak out your ...

  11. Phenomenology and the Empirical Turn

    Zwier, Jochem; Blok, Vincent; Lemmens, Pieter

    2016-01-01

    This paper provides a phenomenological analysis of postphenomenological philosophy of technology. While acknowledging that the results of its analyses are to be recognized as original, insightful, and valuable, we will argue that in its execution of the empirical turn, postphenomenology forfeits

  12. Exploring interaction between a non-speaking boy using aided AAC and his everyday communication partners: features of turn organizing and turn design

    Pilesjö, Maja Sigurd; Rasmussen, Gitte

    2011-01-01

    -at-action is suggested. The analyses demonstrate that the boy’s turn-at-actions are oriented to as a co-constructed and thus interactionally achieved unit: the boy points at a bliss symbol which is given voice by the speaking co-participant. In and through the relevant made voicing of the turn-at-action, a turn...... AAC, bliss symbolics. The analysis indicates that the participants can collaborately create and orient to units in interaction equivalent to turns in interaction although they differ dramatically from ordinary turns-at-talk. In order to capture the nature of the described units, the category turn...

  13. Turning for Ulcer Reduction (TURN) Study: An Economic Analysis.

    Paulden, Mike; Bergstrom, Nancy; Horn, Susan D; Rapp, Mary; Stern, Anita; Barrett, Ryan; Watkiss, Michael; Krahn, Murray

    2014-01-01

    The Turning for Ulcer Reduction (TURN) study was a multisite, randomized controlled trial that aimed to determine the optimal frequency of turning nursing facility residents with mobility limitations who are at moderate and high risk for pressure ulcer (PrU) development. Here we present data from the economic analysis. This economic analysis aims to estimate the economic consequences for Ontario of switching from a repositioning schedule of 2-hour intervals to a schedule of 3-hour or 4-hour intervals. Costs considered in the analysis included those associated with nursing staff time spent repositioning residents and with incontinent care supplies, which included briefs, barrier cream, and washcloths. The total economic benefit of switching to 3-hour or 4-hour repositioning is estimated to be $11.05 or $16.74 per day, respectively, for every resident at moderate or high risk of developing PrUs. For a typical facility with 123 residents, 41 (33%) of whom are at moderate or high risk of developing PrUs, the total economic benefit is estimated to be $453 daily for 3-hour or $686 daily for 4-hour repositioning. For Ontario as a whole, assuming that there are 77,933 residents at 634 LTC facilities, 25,927 (33%) of whom are at moderate or high risk of developing PrUs, the total economic benefits of switching to 3-hour or 4-hour repositioning are estimated to be $286,420 or $433,913 daily, respectively, equivalent to $104.5 million or $158.4 million per year. We did not consider the savings the Ontario Ministry of Health and Long-Term Care might incur should less frequent repositioning reduce the incidence of work-related injury among nursing staff, so our findings are potentially conservative. A switch to 3-hour or 4-hour repositioning appears likely to yield substantial economic benefits to Ontario without placing residents at greater risk of developing PrUs.

  14. Turn-by-Turn and Bunch-by-Bunch Transverse Profiles of a Single Bunch in a Full Ring

    Kraus, R.; Fisher, A.S.

    2005-01-01

    The apparatus described in this paper can image the evolution of the transverse profile of a single bunch, isolated from a full PEP-II ring of 1500 bunches. Using this apparatus there are two methods of single bunch imaging; bunch-by-bunch beam profiling can image every bunch in the ring a single bunch at a time with the images of sequential bunches being in order, allowing one to see variations in beam size along a train. Turn-by-turn beam profiling images a single bunch on each successive turn it makes around the ring. This method will be useful in determining the effect that an injected bunch has on a stable bunch as the oscillations of the injected bunch damp out. Turn-by-turn imaging of the synchrotron light uses a system of lenses and mirrors to image many turns of both the major and minor axis of a single bunch across the photocathode of a gateable camera. The bunch-by-bunch method is simpler: because of a focusing mirror used in porting the light from the ring, the synchrotron light from the orbiting electrons becomes an image at a certain distance from the mirror; and since the camera does not use a lens, the photocathode is set exactly at this image distance. Bunch-by-bunch profiling has shown that in the Low Energy Ring (LER) horizontal bunch size decreases along a train. Turn-by-turn profiling has been able to image 100 turns of a single bunch on one exposure of the camera. The turn-by-turn setup has also been able to image 50 turns of the minor axis showing part of the damping process of an oscillating injected charge during a LER fill. The goal is to image the damping of oscillations of injected charge for 100 turns of both the major and minor axis throughout the damping process during trickle injection. With some changes to the apparatus this goal is within reach and will make turn-by-turn imaging a very useful tool in beam diagnostics

  15. Diamond Turning Of Infra-Red Components

    Hodgson, B.; Lettington, A. H.; Stillwell, P. F. T. C.

    1986-05-01

    Single point diamond machining of infra-red optical components such as aluminium mirrors, germanium lenses and zinc sulphide domes is potentially the most cost effective method for their manufacture since components may be machined from the blanks to a high surface finish, requiring no subsequent polishing, in a few minutes. Machines for the production of flat surfaces are well established. Diamond turning lathes for curved surfaces however require a high capital investment which can be justified only for research purposes or high volume production. The present paper describes the development of a low cost production machine based on a Bryant Symons diamond turning lathe which is able to machine spherical components to the required form and finish. It employs two horizontal spindles one for the workpiece the other for the tool. The machined radius of curvature is set by the alignment of the axes and the radius of the tool motion, as in conventional generation. The diamond tool is always normal to the workpiece and does not need to be accurately profiled. There are two variants of this basic machine. For machining hemispherical domes the axes are at right angles while for lenses with positive or negative curvature these axes are adjustable. An aspherical machine is under development, based on the all mechanical spherical machine, but in which a ± 2 mm aspherecity may be imposed on the best fit sphere by moving the work spindle under numerical control.

  16. Diamond turning on advanced machine tool prototypes

    Arnold, J.B.; Steger, P.J.

    1975-01-01

    Specular-quality metal mirrors are being machined for use in laser optical systems. The fabrication process incorporates special quality diamond tools and specially constructed turning machines. The machines are controlled by advanced control techniques and are housed in an environmentally controlled laboratory to insure ultimate machine stability and positional accuracy. The materials from which these mirrors are primarily produced are the softer face-center-cubic structure metals, such as gold, silver, copper, and aluminum. Mirror manufacturing by the single-point diamond machining process is in an early stage of development, but it is anticipated that this method will become the most economical way for producing high-quality metal mirrors. (U.S.)

  17. MEDIACRACY TURNS INTO A SYNONYM OF MEDIOCRITY?

    Valentina CHIPER

    2014-11-01

    Full Text Available The link between freedom of speech and democracy is based on ideological legitimacy report. A new phenomenon which is worth noticing is the conversion of the freedom of expression from a freedom seen in certain aspects as a solitary freedom into a communication of the masses. Another challenge is prompted by the change of the traditional communication system at the dawn of technology, Internet and its various applications, as well as of the channels used. A weak point is the change in the values scale. If a journalist or a book is deemed good or valuable in terms of competence and ideas, these values are now unfortunately inspired by what we watch on TV. In this train of thoughts, reliable opinion leaders are no longer the same. Mediacracy turns into a synonym of mediocrity with affectivity and emotion prevailing over reason and instead of the communication of thoughts and opinions.

  18. Turning nuclear communications inside out

    Besenyei, Elisabeth; Czibolya, Laszlo

    2002-01-01

    Due to debates on the security of energy supply in the European Union, the international efforts on the implementation of Kyoto protocol and the forthcoming liberalization of the electrical energy market the attention of Hungarian decision-makers was focused on energy related problems. Discussions started on the future role of nuclear power and anti-nuclear environmentalists became more active in their criticism. Changes were needed in the approach and practice of communication on nuclear energy. Previous practice turned to be inefficient in dialogue with different social and influential groups. Public information could not be considered any more as an activity explaining measures to cope with incidents and accidents or giving technical answers to mostly superficial statements on allegedly unsafe features and solutions in nuclear industry. It was time to change the paradigm and to turn the communication into a powerful tool to put forward the arguments, to show the achievements and facts and to explain the efforts in addressing public concerns. The new paradigm turned the previous outside-in approach to a new inside-out type of behavior. Instead of reacting to the attacks coming from outside the new approach means first of all commitment to be open and pro-active in communication and to act in close cooperation with all interested organizations and institutions. The three pillars of the new paradigm, commitment, communication and co-operation are applicable not only for the nuclear industry, but also for the governmental agencies (regulatory bodies, health and emergency authorities etc.) and for the wide range of technical, scientific and civil organizations. Public information should be turned from a burden to a challenge for open, technically valid and honest dialogue. This active communication approach is illustrated by some new initiatives in public information in Hungary. Following the successful Nuclear Academy for Journalists formed new Section of Nuclear

  19. 刘易斯“拐点”与我国初次分配格局--劳动力供给曲线对劳动报酬份额的影响%Lewis Turning Point and Pattern of Primary Distribution in China

    杨瑞龙; 张泽华

    2014-01-01

    This paper , according to the expression of retained earnings in Lewis Turning Point , sets up a labor supply curve going upward to the right.In order to test the theory , the empirical study of this paper not only pres-ents the econometrics method of second order weighted difference to deal with the stock of capital , but also adds new variables to measure retained earnings and difference of labor.Robust return shows that capital of each labor and living cost have positive influence on labor ’ s share , but income gap among labor groups and the number of la-bor exert negative influence on it , which conforms to the anticipation of the model.At the same time , the analysis on welfare of the paper shows that whether the primary distribution is favorable to labor , we can not judge it only by labor’s share, which would lead to misunderstanding.%依据刘易斯“拐点”中对于保留收益的描述构建了一条向右上方倾斜的劳动力供给曲线。为了对新的理论进行验证,实证研究不仅提出了用以解决资本存量问题的二阶加权差分计量方法,还加入了用于衡量劳动力保留收益水平和差距的新变量。稳健的回归结果表明劳均资本、生活成本对劳动报酬份额存在正向影响,而劳动力群体内部收入差距以及劳动力数量对该份额存在负向影响,符合模型预期。与此同时,福利分析指出,对于初次分配是否有利于劳动者不能仅以劳动报酬份额为标准,否则会产生误判。

  20. BP « Deepwater Horizon » du Golfe du Mexique à l’Afrique : un tournant pour l’industrie pétrolière ? BP “Deepwater Horizon” from the Gulf of Mexico to Africa : a turning point for the Oil Industry ?

    Géraud Magrin

    2010-09-01

    Full Text Available L’explosion de la plateforme BP Deepwater Horizon du 20 avril 2010 constitue une des plus graves pollutions pétrolières de l’histoire. Sa localisation dans les eaux du premier consommateur mondial, et l’implication d’une des compagnies les plus avancées en matière de responsabilité sociale d’entreprise, sont révélatrices des enjeux actuels de la gestion environnementale des risques pétroliers. Alors que les gisements les plus accessibles sont exploités par des sociétés nationales, les compagnies internationales satisfont l’inextinguible demande en pétrole du système mondial en explorant des situations extrêmes, comme les eaux très profondes. Cela s’accompagne de risques croissants. La catastrophe de BP nous montre le danger de considérer un risque infime comme une absence de risque : l’exemption de planification d’urgence explique la longue durée et l’ampleur de la fuite. Elle rappelle aussi que les impacts du pétrole ne sont bien connus qu’à la surface et le long des côtes : or, cette fuite en eaux profondes causera des dommages écologiques graves dans les zones pélagiques. Cet événement changera les règles du jeu de la régulation environnementale pétrolière dans les zones sensibles. Nous donnons un aperçu des évolutions qu’il pourrait favoriser en Afrique, notamment en Mauritanie. Il reste à savoir si l’augmentation des coûts qui en résultera contribuera à accélérer la transition énergétique mondiale hors de la dépendance des hydrocarbures.On Thursday the 20th april 2010, the blowout of the Deepwater Horizon drilling platform operated by BP in the Gulf of Mexico starts what can be considered one of the major oil spills in the world history. Taking place in the national waters of the world’s first oil consumer and affecting one of the more advanced oil major in Corporate Social Responsibility, this accident may turn out to be a land mark for environmental management in the

  1. Major depression

    Depression - major; Depression - clinical; Clinical depression; Unipolar depression; Major depressive disorder ... providers do not know the exact causes of depression. It is believed that chemical changes in the ...

  2. Notes on the Spatial Turn

    Stipe Grgas

    2012-06-01

    Full Text Available On the basis of ever-mounting evidence, amongst which is the “zone” problematic of the Zadar conference that occassioned these notes, it can be concluded that the spatial turn has insinuated itself as an all-pervading heuristic tool throughout the humanities and the social sciences. The extent to which space and spatiality have usurped the central stage in the various branches of reasearch can be gauged by admonishments that what we are witnessing is a new fundamentalism that has simply inverted the terms of the dualism of time and space (May and Thrift 2001: “Introduction”. According to Michael Dear the sway of space is manifested in multifold ways: in the ubiquity of spatial analysis in social theories and practices; in the explosion of publications devoted to the exploration of the interface of the social and the spatial; in the reintegration of human geography into various domains of knowledge; in the focus given to difference and the consequent diversification of theoretical and empirical practices; in a theoretically informed exploration of the relation between geographical knowledge and social action; and, finally, in the unprecedented proliferation of research agendas and publications pertaining to these isuuses (Dear 2001: 24. Two recent collections of papers are indicative of the ubiquity of spatial issues in scholarly work.

  3. Nuclear power: the turning tide

    Riley, P.J.; Warren, D.S.

    1981-01-01

    During 1980 and 1981, opposition to the expansion of the nuclear power generation programme grew from about 45% of the population to approximately 53%. Women, young people and labour voters are the most strongly opposed to nuclear power but among no section of the population is there a clear majority in favour of building more nuclear power stations. (author)

  4. Wrong turns and dead ends

    Fisher, Len

    2013-12-01

    In his book Brilliant Blunders, Mario Livio offers a detailed and fascinating examination of major errors made by five great scientists - Charles Darwin, Linus Pauling, Lord Kelvin, Fred Hoyle and Albert Einstein - as they sought to understand the evolution of life on Earth, the evolution of the Earth itself and the evolution of the universe as a whole.

  5. Support vector machines for prediction and analysis of beta and gamma-turns in proteins.

    Pham, Tho Hoan; Satou, Kenji; Ho, Tu Bao

    2005-04-01

    Tight turns have long been recognized as one of the three important features of proteins, together with alpha-helix and beta-sheet. Tight turns play an important role in globular proteins from both the structural and functional points of view. More than 90% tight turns are beta-turns and most of the rest are gamma-turns. Analysis and prediction of beta-turns and gamma-turns is very useful for design of new molecules such as drugs, pesticides, and antigens. In this paper we investigated two aspects of applying support vector machine (SVM), a promising machine learning method for bioinformatics, to prediction and analysis of beta-turns and gamma-turns. First, we developed two SVM-based methods, called BTSVM and GTSVM, which predict beta-turns and gamma-turns in a protein from its sequence. When compared with other methods, BTSVM has a superior performance and GTSVM is competitive. Second, we used SVMs with a linear kernel to estimate the support of amino acids for the formation of beta-turns and gamma-turns depending on their position in a protein. Our analysis results are more comprehensive and easier to use than the previous results in designing turns in proteins.

  6. 32 CFR 636.23 - Turning movements.

    2010-07-01

    ... Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL... movements. (a) U-turns are prohibited on all streets in the cantonment area. (b) Right-turns will be made from a position as close to the right edge or right curb of the roadway as possible. (c) Left-turns...

  7. Clinical evaluation of an automated turning bed.

    Melland, H I; Langemo, D; Hanson, D; Olson, B; Hunter, S

    1999-01-01

    The purposes of this study were to assess client comfort and sleep quality, client physiologic response (skin and respiratory status), the effect on the need for caregiver assistance, and cost when using an automated turning bed. Nonexperimental, evaluative study. Twenty-four adult home or long-term care resident subjects who had a degenerative disease, spinal cord injury, stroke, cerebral palsy, or back surgery. Each subject agreed to use the automated turning bed for four weeks. Researchers completed a demographic survey and skin assessment, and assessed each subject for pressure ulcer risk and for the need of assistance of a care giver for turning before and after the four weeks of using the turning bed. Subjects rated the turning bed in terms of comfort and sleep quality. Subjects rated the turning bed as more comfortable than their own bed and expressed satisfaction at the pain relief attained when on the turning bed. While using the turning bed, there was a significant improvement in sleep quality. No skin breakdown or deterioration in respiratory status occurred. Fewer subjects required the assistance of a caregiver for turning when on the turning bed. This automated turning bed shows great promise in meeting a need for patients with limited mobility whether they are homebound or in a residential community. Future studies that further investigate use of the turning bed for postoperative back patients while still in the acute care setting are indicated. Replicative studies with a larger sample size are also indicated.

  8. A Rhetoric of Turns: Signs and Symbols in Education

    Rutten, Kris; Soetaert, Ronald

    2014-01-01

    In our research and teaching we explore the value and the place of rhetoric in education. From a theoretical perspective we situate our work in different disciplines, inspired by major "turns": linguistic, cultural, anthropological/ethnographic, interpretive, semiotic, narrative, literary, rhetorical etc. In this article we engage in the…

  9. Do You Have Major Depression?

    ... of this page please turn Javascript on. Feature: Depression Do You Have Major Depression? Past Issues / Fall 2009 Table of Contents Simple ... member may have major depression. —NIMH Types of Depression Just like other illnesses, such as heart disease, ...

  10. Congress turns cold on fusion

    Marshall, E.

    1984-01-01

    A 5% cut in fusion research budgets will force some programs to be dropped in order to keep the large machinery running unless US and European scientists collaborate instead of competing. Legislators became uneasy about the escalating costs of the new devices. The 1984 budget of $470 million for magnetic fusion research is only half the projected cost of the Tokomak Fusion Core Experiment (TFCX) planned to ignite, for the first time, a self-sustaining burn. Planning for the TCFX continued despite the message from Congress. Work at the large institutions at Princeton, MIT, etc. may survive at the expense of other programs, some of which will lose academic programs as well. Scientists point to the loss of new ideas and approaches when projects are cancelled. Enthusiasm is growing for international collaboration

  11. Turning the tide against tuberculosis.

    Padayatchi, Nesri; Naidu, Naressa; Friedland, Gerald; Naidoo, Kasavan; Conradie, Francesca; Naidoo, Kogieleum; O'Donnell, Max Roe

    2017-03-01

    Despite affecting men, women, and children for millennia, tuberculosis (TB) is the most neglected disease. In contrast, the global response to HIV has reached a defining moment. By uniting efforts, promptly integrating major scientific findings for both treatment and prevention, and scaling up services, the once inconceivable end to the HIV epidemic may no longer be an illusion. "The world has made defeating AIDS a top priority. This is a blessing. But TB remains ignored" - Nelson Mandela. While there is no doubt that revolutionary diagnostics and new and repurposed drugs have provided some hope in the fight against TB, it is evident that scientific advances on their own are inadequate to achieve the World Health Organization's ambitious goal to end TB by 2035. In this article, the consequences of a myopic and conventional biomedical approach to TB, which has ultimately permeated to the level of individual patient care, are highlighted. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  12. The Bulletin turns the page

    2006-01-01

    Today, the paper version of the CERN Bulletin has a new look, the first since the 1970s. The new layout, which has been designed to improve readability, is part of an ongoing effort to improve internal communication at CERN. The Bulletin is the Organization's main tool for communication with the CERN community. It keeps everyone abreast of information that is important and essential for our working life at CERN. It plays an important role in keeping us up to date with social and scientific developments at the Laboratory. And it should be a force for cohesion across this very diverse organization. At the same time, the distribution for the printed Bulletin is being changed from individual mailboxes to distribution points around the Laboratory. This reflects changing reading habits, with the on-line version gaining a steadily increasing readership. For some time now, the paper Bulletin has been published fortnightly. However, the on-line version is updated weekly, so I encourage you all to look at it. In addi...

  13. Structural and sequence features of two residue turns in beta-hairpins.

    Madan, Bharat; Seo, Sung Yong; Lee, Sun-Gu

    2014-09-01

    Beta-turns in beta-hairpins have been implicated as important sites in protein folding. In particular, two residue β-turns, the most abundant connecting elements in beta-hairpins, have been a major target for engineering protein stability and folding. In this study, we attempted to investigate and update the structural and sequence properties of two residue turns in beta-hairpins with a large data set. For this, 3977 beta-turns were extracted from 2394 nonhomologous protein chains and analyzed. First, the distribution, dihedral angles and twists of two residue turn types were determined, and compared with previous data. The trend of turn type occurrence and most structural features of the turn types were similar to previous results, but for the first time Type II turns in beta-hairpins were identified. Second, sequence motifs for the turn types were devised based on amino acid positional potentials of two-residue turns, and their distributions were examined. From this study, we could identify code-like sequence motifs for the two residue beta-turn types. Finally, structural and sequence properties of beta-strands in the beta-hairpins were analyzed, which revealed that the beta-strands showed no specific sequence and structural patterns for turn types. The analytical results in this study are expected to be a reference in the engineering or design of beta-hairpin turn structures and sequences. © 2014 Wiley Periodicals, Inc.

  14. Vantage point.

    Kay, Jenny

    2004-06-01

    'Management by expletives' sums up the new Channel 4 programme, Ramsay's Kitchen Nightmares, in which TV chef Gordon Ramsay attempts to turn around a series of failing kitchens. 'It's your f***ing kitchen,' Ramsay tells one hapless head chef, 'F***ing organise it.'

  15. Realistic page-turning of electronic books

    Fan, Chaoran; Li, Haisheng; Bai, Yannan

    2014-01-01

    The booming electronic books (e-books), as an extension to the paper book, are popular with readers. Recently, many efforts are put into the realistic page-turning simulation o f e-book to improve its reading experience. This paper presents a new 3D page-turning simulation approach, which employs piecewise time-dependent cylindrical surfaces to describe the turning page and constructs smooth transition method between time-dependent cylinders. The page-turning animation is produced by sequentially mapping the turning page into the cylinders with different radii and positions. Compared to the previous approaches, our method is able to imitate various effects efficiently and obtains more natural animation of turning page.

  16. Tipping Point

    Full Text Available ... en español Blog About OnSafety CPSC Stands for Safety The Tipping Point Home > 60 Seconds of Safety (Videos) > The Tipping Point The Tipping Point by ... danger death electrical fall furniture head injury product safety television tipover tv Watch the video in Adobe ...

  17. Optimization of cutting parameters for machining time in turning process

    Mavliutov, A. R.; Zlotnikov, E. G.

    2018-03-01

    This paper describes the most effective methods for nonlinear constraint optimization of cutting parameters in the turning process. Among them are Linearization Programming Method with Dual-Simplex algorithm, Interior Point method, and Augmented Lagrangian Genetic Algorithm (ALGA). Every each of them is tested on an actual example – the minimization of production rate in turning process. The computation was conducted in the MATLAB environment. The comparative results obtained from the application of these methods show: The optimal value of the linearized objective and the original function are the same. ALGA gives sufficiently accurate values, however, when the algorithm uses the Hybrid function with Interior Point algorithm, the resulted values have the maximal accuracy.

  18. Major Links.

    Henderson, Tona

    1995-01-01

    Provides electronic mail addresses for resources and discussion groups related to the following academic majors: art, biology, business, chemistry, computer science, economics, health sciences, history, literature, math, music, philosophy, political science, psychology, sociology, and theater. (AEF)

  19. Major Roads

    Minnesota Department of Natural Resources — This data set contains roadway centerlines for major roads (interstates and trunk highways) found on the USGS 1:24,000 mapping series. These roadways are current...

  20. performance characteristics of a cam turning attachment

    Dr Obe

    ABSTRACT. A modification of a cylindrical turning unit has been done to give a non- cylindrical turning attachment for production of irregular shapes, like cams on the lathe machine. To assess the performance of the attachment, cutting forces have been measured using a 'Sigma' Cutting Tool. Dynamometer. Furthermore ...

  1. Turning Planetary Theory Upside Down

    2010-04-01

    The discovery of nine new transiting exoplanets is announced today at the RAS National Astronomy Meeting (NAM2010). When these new results were combined with earlier observations of transiting exoplanets astronomers were surprised to find that six out of a larger sample of 27 were found to be orbiting in the opposite direction to the rotation of their host star - the exact reverse of what is seen in our own Solar System. The new discoveries provide an unexpected and serious challenge to current theories of planet formation. They also suggest that systems with exoplanets of the type known as hot Jupiters are unlikely to contain Earth-like planets. "This is a real bomb we are dropping into the field of exoplanets," says Amaury Triaud, a PhD student at the Geneva Observatory who, with Andrew Cameron and Didier Queloz, leads a major part of the observational campaign. Planets are thought to form in the disc of gas and dust encircling a young star. This proto-planetary disc rotates in the same direction as the star itself, and up to now it was expected that planets that form from the disc would all orbit in more or less the same plane, and that they would move along their orbits in the same direction as the star's rotation. This is the case for the planets in the Solar System. After the initial detection of the nine new exoplanets [1] with the Wide Angle Search for Planets (WASP, [2]), the team of astronomers used the HARPS spectrograph on the 3.6-metre ESO telescope at the La Silla observatory in Chile, along with data from the Swiss Euler telescope, also at La Silla, and data from other telescopes to confirm the discoveries and characterise the transiting exoplanets [3] found in both the new and older surveys. Surprisingly, when the team combined the new data with older observations they found that more than half of all the hot Jupiters [4] studied have orbits that are misaligned with the rotation axis of their parent stars. They even found that six exoplanets in this

  2. Vehicle kinematics in turns and the role of cornering lamps in driver vision.

    2010-11-01

    "SAE Recommended Practice J852 and ECE Regulations 119 and 48 for cornering lamps : were compared. Photometric points described in each specification were then compared : to naturalistic low-speed turn trajectories produced by 87 drivers. Future loca...

  3. The Third Turn toward the Social: Nancy Welch's "Living Room," Tony Scott's "Dangerous Writing," and Rhetoric and Composition's Turn toward Grassroots Political Activism

    Kinney, Kelly; Girshin, Thomas; Bowlin, Barrett

    2013-01-01

    This review essay examines recent texts by Nancy Welch and Tony Scott, both of which use embodied activism as a starting point for their inquiries. Taken together, these works point to a distinct shift in composition studies' turn toward the social, one that calls on workers both within and outside the academy to actively engage in grassroots…

  4. Fixed Points

    Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 5. Fixed Points - From Russia with Love - A Primer of Fixed Point Theory. A K Vijaykumar. Book Review Volume 5 Issue 5 May 2000 pp 101-102. Fulltext. Click here to view fulltext PDF. Permanent link:

  5. Tipping Point

    Full Text Available ... OnSafety CPSC Stands for Safety The Tipping Point Home > 60 Seconds of Safety (Videos) > The Tipping Point ... 24 hours a day. For young children whose home is a playground, it’s the best way to ...

  6. Tipping Point

    Full Text Available ... 60 Seconds of Safety (Videos) > The Tipping Point The Tipping Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head injury product safety television tipover tv Watch the video in Adobe Flash ...

  7. METHODICAL MODEL FOR TEACHING BASIC SKI TURN

    Danijela Kuna

    2013-07-01

    Full Text Available With the aim of forming an expert model of the most important operators for basic ski turn teaching in ski schools, an experiment was conducted on a sample of 20 ski experts from different countries (Croatia, Bosnia and Herzegovina and Slovenia. From the group of the most commonly used operators for teaching basic ski turn the experts picked the 6 most important: uphill turn and jumping into snowplough, basic turn with hand sideways, basic turn with clapping, ski poles in front, ski poles on neck, uphill turn with active ski guiding. Afterwards, ranking and selection of the most efficient operators was carried out. Due to the set aim of research, a Chi square test was used, as well as the differences between frequencies of chosen operators, differences between values of the most important operators and differences between experts due to their nationality. Statistically significant differences were noticed between frequencies of chosen operators (c2= 24.61; p=0.01, while differences between values of the most important operators were not obvious (c2= 1.94; p=0.91. Meanwhile, the differences between experts concerning thier nationality were only noticeable in the expert evaluation of ski poles on neck operator (c2=7.83; p=0.02. Results of current research are reflected in obtaining useful information about methodological priciples of learning basic ski turn organization in ski schools.

  8. German Atomic Energy Act turns fifty

    Schneider, Horst

    2009-01-01

    The German Atomic Energy Act entered into force on January 1, 1960. It turns fifty at the beginning of 2010. Is this a reason to celebrate or rather the opposite? Lawyers, in principle, can view old pieces of legislation from 2 perspectives: On the one hand, aged laws are treated in a spirit of veneration and are celebrated as proven. On the other hand, an anniversary of this kind can be a welcome reason for demands to abolish or, at least, fundamentally renew that law. Over the past half century, the German Atomic Energy Act went through stormy and varied phases both of a legal and a political character. Its 50 th anniversary is likely to spark off very conflicting evaluations as well. A review of legal history shows that the German or, rather, the Federal German Atomic Energy Act (AtG) was not a first-of-its-kind piece of legislation but stemmed from the 1957 EURATOM Treaty, in a way representing a latecomer of that treaty. The Atomic Energy Act experienced a number of important developments throughout its history: - In 1975, compulsory licensing of fuel element factories was introduced. - The back end of the fuel cycle, especially final storage, were incorporated in the Atomic Energy Act comprehensively first in 1976. - In 1985, legislators decided in favor of unlimited nuclear liability. - In 1994 and 1998, only some innovations in special items were introduced under the headings of environmental impact assessment and suitability for repository storage because the controversy about nuclear power did not permit a fundamental alignment towards a more comprehensive modern safety law. - The decision to opt out of the peaceful uses of nuclear power in 2002 drew the final line so far of decisions about directions of nuclear law in a major amendment. In parallel, the decisions by the Federal Constitutional Court and the Federal Administrative Court in the late 1970s and, above all, the 1980s provided important assistance which has remained valid to this day. What is

  9. Turning university professors into competent learners

    Stefanova, Eliza; Ilieva, Miroslava; Nikolova, Nikolina; Stefanov, Krassen

    2008-01-01

    Stefanova, E., Ilieva, M., Nikolova, N, & Stefanov, K. (2008). Turning university professors into competent learners. In H. W. Sligte & R. Koper (Eds.), Proceedings of the 4th TENCompetence Open Workshop. Empowering Learners for Lifelong Competence Development: pedagogical, organisational and

  10. Turning Technology into Business Using University Patents

    Hartmann, L.

    2014-01-01

    We present an education paradigm that stimulates innovation and entrepreneurship through a master's-level university course: "Turning Technology into Business". The course was specifically designed to connect technological research with education using patented technologies developed at the research

  11. Cellular Reprogramming–Turning the Clock Back

    Home; Journals; Resonance – Journal of Science Education; Volume 18; Issue 6. Cellular Reprogramming - Turning the Clock Back - Nobel Prize in Physiology or Medicine, 2012. Deepa Subramanyam. General Article Volume 18 Issue 6 June 2013 pp 514-521 ...

  12. Dew Point

    Goldsmith, Shelly

    1999-01-01

    Dew Point was a solo exhibition originating at PriceWaterhouseCoopers Headquarters Gallery, London, UK and toured to the Centre de Documentacio i Museu Textil, Terrassa, Spain and Gallery Aoyama, Tokyo, Japan.

  13. Tipping Point

    Full Text Available ... Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head injury product safety television tipover tv Watch the video in Adobe Flash ...

  14. Tipping Point

    ... Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head injury product safety television tipover tv Watch the video in Adobe Flash ...

  15. Tipping Point

    Full Text Available ... Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head ... see news reports about horrible accidents involving young children and furniture, appliance and tv tip-overs. The ...

  16. Tipping Point

    Full Text Available ... Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head ... TV falls with about the same force as child falling from the third story of a building. ...

  17. Tipping Point

    Full Text Available ... Tipping Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture ... about horrible accidents involving young children and furniture, appliance and tv tip-overs. The force of a ...

  18. Derrida’s Turn to Franciscan Philosophy

    Marko Zlomislic

    2008-12-01

    Full Text Available Contemporary French philosophers such as Levinas, Bataille, and Derrida, along with the existentialists Kierkegaard and Nietzsche have all made use of Franciscan insights in order to safeguard the ipseity that cannot be reduced or totalized. In keeping with the taste that concerns me, this paper will examine Derrida’s turn to the poetry of Gerard Manley Hopkins and how such a turn may place Derrida within a catholic and Franciscan tradition.

  19. Turn-taking in Human Communication--Origins and Implications for Language Processing.

    Levinson, Stephen C

    2016-01-01

    Most language usage is interactive, involving rapid turn-taking. The turn-taking system has a number of striking properties: turns are short and responses are remarkably rapid, but turns are of varying length and often of very complex construction such that the underlying cognitive processing is highly compressed. Although neglected in cognitive science, the system has deep implications for language processing and acquisition that are only now becoming clear. Appearing earlier in ontogeny than linguistic competence, it is also found across all the major primate clades. This suggests a possible phylogenetic continuity, which may provide key insights into language evolution. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Prediction and analysis of beta-turns in proteins by support vector machine.

    Pham, Tho Hoan; Satou, Kenji; Ho, Tu Bao

    2003-01-01

    Tight turn has long been recognized as one of the three important features of proteins after the alpha-helix and beta-sheet. Tight turns play an important role in globular proteins from both the structural and functional points of view. More than 90% tight turns are beta-turns. Analysis and prediction of beta-turns in particular and tight turns in general are very useful for the design of new molecules such as drugs, pesticides, and antigens. In this paper, we introduce a support vector machine (SVM) approach to prediction and analysis of beta-turns. We have investigated two aspects of applying SVM to the prediction and analysis of beta-turns. First, we developed a new SVM method, called BTSVM, which predicts beta-turns of a protein from its sequence. The prediction results on the dataset of 426 non-homologous protein chains by sevenfold cross-validation technique showed that our method is superior to the other previous methods. Second, we analyzed how amino acid positions support (or prevent) the formation of beta-turns based on the "multivariable" classification model of a linear SVM. This model is more general than the other ones of previous statistical methods. Our analysis results are more comprehensive and easier to use than previously published analysis results.

  1. Characteristics of turn signal use at intersections in baseline naturalistic driving.

    Sullivan, John M; Bao, Shan; Goudy, Roy; Konet, Heather

    2015-01-01

    The purpose of this study was to determine whether a driver's use of turn signals is sufficiently reliable to forecast a vehicle's future path around an intersection, when detailed information about the intersection is unavailable. Naturalistic observations of turn signal use among 108 drivers on surface streets were extracted from the baseline portion of a field operational test of a safety system. Left and right turns that resulted in heading changes of between 70 and 110° and turn radii between 18 and 90 m were selected from the dataset. The odds that a driver would signal a turn were modeled as a function of road type, turn direction, presence of a forward vehicle, whether the vehicle stopped before the turn, and driver age and gender. Overall, 25 percent of left turns and 29 percent of right turns were not signaled. Road type, turn direction, and presence of a forward vehicle were found to influence the odds that a turn is signaled, while gender and age of the driver did not. The results suggest that situational factors like road type and turn direction are more powerful predictors of whether a turn will be signaled than either age or gender. Signaling on major and minor surface roads was about 5 times more likely than on local roads and 1.5 times more likely when a forward vehicle was present, suggesting a possible effect of traffic volume. It was concluded that turn signal activation alone may be insufficiently reliable to forecast a driver's path. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Precision lens assembly with alignment turning system

    Ho, Cheng-Fang; Huang, Chien-Yao; Lin, Yi-Hao; Kuo, Hui-Jean; Kuo, Ching-Hsiang; Hsu, Wei-Yao; Chen, Fong-Zhi

    2017-10-01

    The poker chip assembly with high precision lens barrels is widely applied to ultra-high performance optical system. ITRC applies the poker chip assembly technology to the high numerical aperture objective lenses and lithography projection lenses because of its high efficiency assembly process. In order to achieve high precision lens cell for poker chip assembly, an alignment turning system (ATS) is developed. The ATS includes measurement, alignment and turning modules. The measurement module is equipped with a non-contact displacement sensor (NCDS) and an autocollimator (ACM). The NCDS and ACM are used to measure centration errors of the top and the bottom surface of a lens respectively; then the amount of adjustment of displacement and tilt with respect to the rotational axis of the turning machine for the alignment module can be determined. After measurement, alignment and turning processes on the ATS, the centration error of a lens cell with 200 mm in diameter can be controlled within 10 arcsec. Furthermore, a poker chip assembly lens cell with three sub-cells is demonstrated, each sub-cells are measured and accomplished with alignment and turning processes. The lens assembly test for five times by each three technicians; the average transmission centration error of assembly lens is 12.45 arcsec. The results show that ATS can achieve high assembly efficiency for precision optical systems.

  3. First turn around strategy for RHIC

    Milutinovic, J.; Ruggiero, A.G.

    1991-01-01

    The authors present a strategy for achieving the so-called first turn around in RHIC. The strategy is based on the same method proposed to correct a distorted closed orbit in RHIC, i.e. on a generalization of the local three-bump method. They found out that the method is very effective in passing the beam through a non-ideal, insufficiently known, machine. The perturbed lattice was generated by the code PATRIS, which was also adapted to control the newly developed software. In ten distributions of errors the software was capable of passing the beam through in 2-3 injection attempts, at full sextupole strength. It was also determined that once the beam makes the first turn around and all the correctors are energized, it stays in the machine for at least several hundred turns

  4. Application of digital lock-in detection to Hefei Light Source turn-by-turn system

    Yang Yongliang; Wang Junhua; Sun Baogen; Chen Yuanbo; Zhou Zeran

    2010-01-01

    This paper introduces the digital lock-in detection theory and discusses its feasibility to obtain the damping rate in turn-by-turn measurement systems. Numerical simulations of this method were carried out with Matlab. Then principle presenting beam experiments were conducted on the Hefei Light Source (HLS) storage ring. The measured beta oscillation growth time is about 0.26 ms and the damping time is about 1.2 ms. Simulation and experimental results show that, the digital lock-in detection method is effective in damping rate measurement in turn-by-turn measurement systems. (authors)

  5. The embodied turn in research on language and social interaction

    Nevile, Maurice

    2015-01-01

    I use the term the embodied turn to mean the point when interest in the body became established among researchers on language and social interaction, exploiting the greater ease of video-recording. This review paper tracks the growth of "embodiment" in over 400 papers published in Research...... on Language and Social Interaction from 1987-2013. I consider closely two areas where analysts have confronted challenges, and how they have responded: settling on precise and analytically helpful terminology for the body; and transcribing and representing the body, particularly its temporality and manner....

  6. Turning a Poor Ion Channel into a Good Pump

    Astumian, Dean

    2003-05-01

    We consider a membrane protein that can exist in two configurations, either one of which acts as a poor ion channel, allowing ions to slowly leak across the membrane from high to low elctrochemical potential. We show that random external fluctuations can provide the energy to turn this poor channel into a good pump that drives ion transport from low to high electrochemical potential. We discuss this result in terms of a gambling analogy, and point to possible implications for fields as far ranging as population biology, economics, and actuarial science.

  7. Dynamic characterization of the cutting conditions in dry turning

    Serra, R [ENI Val de Loire, Universite Francois Rabelais de Tours, Laboratoire de Mecanique et Rheologie, E.A. 2640, B.P. 3410, 41034 Blois Cedex (France); Chibane, H [Universite Francois Rabelais, Laboratoire de Mecanique et Rheologie, E.A. 2640, B.P. 3410, 41034 Blois Cedex (France); Leroy, R, E-mail: roger.serra@univ-tours.f [Universite Francois Rabelais, Polytech' Tours, Laboratoire de Mecanique et Rheologie, E.A. 2640, 7 Avenue Marcel Dassault, 37200 Tours (France)

    2009-08-01

    Machining instability in the form of violent vibrations or chatter is a physical process characterized by extreme cutting force at the cutting point. The process has very negative impact on machine integrity, tool life, surface quality and dimensional accuracy. Thus it could significantly compromise productivity and manufacturing quality. In the present paper, the importance of characterization and identification of dynamic instability in dry turning operation are shown. The stability behaviour of machine vibration or chatter has been examined and the various relevant parameters are studied and discuted. For chatter detection and identification of the transition between stable and unstable states, different methods are used. Results obtained proof the accuracy of these methods.

  8. Leibniz, Lefebvre and the spatial turn in law

    Isolde de Villiers

    2016-11-01

    Full Text Available This contribution takes as its point of departure the spatial turn in law and the notion of spatial justice. It traces the term ‘spatial justice’ as introduced through the Spatial Planning and Land Use Management Act and it looks at the underlying view of space that has influenced the spatial turn in law. It furthermore investigates the ways in which the spatial turn in law has been influenced by the thinking of Henri Lefebvre, who relies on a Leibnizian conception of space. Lastly the link between Leibniz and legal positivism is considered in order to reach the final conclusion in the form of a caution against merely adding the language of spatial justice to an approach to space that remains caught up in abstract space. This will only further entrench existing fault lines in society. For this conclusion the work of Roger Berkowitz is central. Berkowitz argues convincingly that the work of Leibniz was central in the development of legal positivism, despite Leibniz in general being considered as a natural law thinker. The same applies to spatial justice theory, where the work of Leibniz is central: it may present the possibilities of another law – the law as it ought to be. The law conceptualised as ‘ought’ instead of ‘is’ would promote reconciliation. Alternatively, spatial justice can simply present the law as it ‘is’ and reconfirm and deepen the chasms in our world.

  9. A Practice Turn for Teacher Education?

    Reid, Jo-Anne

    2011-01-01

    Within the Research Institute for Professional Practice, Learning and Education (RIPPLE) at Charles Sturt University, teacher education researchers have been quick to respond to the opportunities created by what is known as "the practice turn" that characterises contemporary theory around the globe and across disciplines. We are working,…

  10. The Dynamic Turn in Quantum Logic

    Baltag, A.; Smets, S.

    2012-01-01

    In this paper we show how ideas coming from two areas of research in logic can reinforce each other. The first such line of inquiry concerns the "dynamic turn" in logic and especially the formalisms inspired by Propositional Dynamic Logic (PDL); while the second line concerns research into the

  11. The dynamic turn in quantum logic

    Baltag, Alexandru; Smets, Sonja

    In this paper we show how ideas coming from two areas of research in logic can reinforce each other. The first such line of inquiry concerns the "dynamic turn" in logic and especially the formalisms inspired by Propositional Dynamic Logic (PDL); while the second line concerns research into the

  12. Primordial spectra from sudden turning trajectory

    Noumi, Toshifumi; Yamaguchi, Masahide

    2013-12-01

    Effects of heavy fields on primordial spectra of curvature perturbations are discussed in inflationary models with a sudden turning trajectory. When heavy fields are excited after the sudden turn and oscillate around the bottom of the potential, the following two effects are generically induced: deformation of the inflationary background spacetime and conversion interactions between adiabatic and isocurvature perturbations, both of which can affect the primordial density perturbations. In this paper, we calculate primordial spectra in inflationary models with sudden turning potentials taking into account both of the two effects appropriately. We find that there are some non-trivial correlations between the two effects in the power spectrum and, as a consequence, the primordial scalar power spectrum has a peak around the scale exiting the horizon at the turn. Though both effects can induce parametric resonance amplifications, they are shown to be canceled out for the case with the canonical kinetic terms. The peak feature and the scale dependence of bispectra are also discussed.

  13. Business Intelligence: Turning Knowledge into Power

    Endsley, Krista

    2009-01-01

    Today, many school districts are turning to business intelligence tools to retrieve, organize, and share knowledge for faster analysis and more effective, guided decision making. Business intelligence (BI) tools are the technologies and applications that gather and report information to help an organization's leaders make better decisions. BI…

  14. Zigzag turning preference of freely crawling cells.

    Taeseok Daniel Yang

    Full Text Available The coordinated motion of a cell is fundamental to many important biological processes such as development, wound healing, and phagocytosis. For eukaryotic cells, such as amoebae or animal cells, the cell motility is based on crawling and involves a complex set of internal biochemical events. A recent study reported very interesting crawling behavior of single cell amoeba: in the absence of an external cue, free amoebae move randomly with a noisy, yet, discernible sequence of 'run-and-turns' analogous to the 'run-and-tumbles' of swimming bacteria. Interestingly, amoeboid trajectories favor zigzag turns. In other words, the cells bias their crawling by making a turn in the opposite direction to a previous turn. This property enhances the long range directional persistence of the moving trajectories. This study proposes that such a zigzag crawling behavior can be a general property of any crawling cells by demonstrating that 1 microglia, which are the immune cells of the brain, and 2 a simple rule-based model cell, which incorporates the actual biochemistry and mechanics behind cell crawling, both exhibit similar type of crawling behavior. Almost all legged animals walk by alternating their feet. Similarly, all crawling cells appear to move forward by alternating the direction of their movement, even though the regularity and degree of zigzag preference vary from one type to the other.

  15. Strategy in Generative Planning of Turning Processes

    van Houten, Frederikus J.A.M.; Kals, H.J.J.

    1986-01-01

    This paper reports on the process and operations planning system ROUND and the strategies which underlie the decision making processes in the planning of turning operations. At first, an outline is given about the environment for which generative systems like ROUND are being developed. The

  16. pi-Turns: types, systematics and the context of their occurrence in protein structures.

    Dasgupta, Bhaskar; Chakrabarti, Pinak

    2008-09-22

    For a proper understanding of protein structure and folding it is important to know if a polypeptide segment adopts a conformation inherent in the sequence or it depends on the context of its flanking secondary structures. Turns of various lengths have been studied and characterized starting from three-residue gamma-turn to six-residue pi-turn. The Schellman motif occurring at the C-terminal end of alpha-helices is a classical example of hydrogen bonded pi-turn involving residues at (i) and (i+5) positions. Hydrogen bonded and non-hydrogen bonded beta- and alpha-turns have been identified previously; likewise, a systematic characterization of pi-turns would provide valuable insight into turn structures. An analysis of protein structures indicates that at least 20% of pi-turns occur independent of the Schellman motif. The two categories of pi-turns, designated as pi-HB and SCH, have been further classified on the basis of backbone conformation and both have AAAa as the major class. They differ in the residue usage at position (i+1), the former having a large preference for Pro that is absent in the latter. As in the case of shorter length beta- and alpha-turns, pi-turns have also been identified not only on the basis of the existence of hydrogen bond, but also using the distance between terminal C alpha-atoms, and this resulted in a comparable number of non-hydrogen-bonded pi-turns (pi-NHB). The presence of shorter beta- and alpha-turns within all categories of pi-turns, the subtle variations in backbone torsion angles along the turn residues, the location of the turns in the context of tertiary structures have been studied. pi-turns have been characterized, first using hydrogen bond and the distance between C alpha atoms of the terminal residues, and then using backbone torsion angles. While the Schellman motif has a structural role in helix termination, many of the pi-HB turns, being located on surface cavities, have functional role and there is also sequence

  17. Reconceptualizing Autonomy: A Relational Turn in Bioethics.

    Jennings, Bruce

    2016-05-01

    History's judgment on the success of bioethics will not depend solely on the conceptual creativity and innovation in the field at the level of ethical and political theory, but this intellectual work is not insignificant. One important new development is what I shall refer to as the relational turn in bioethics. This development represents a renewed emphasis on the ideographic approach, which interprets the meaning of right and wrong in human actions as they are inscribed in social and cultural practices and in structures of lived meaning and interdependence; in an ideographic approach, the task of bioethics is to bring practice into theory, not the other way around. The relational turn in bioethics may profoundly affect the critical questions that the field asks and the ethical guidance it offers society, politics, and policy. The relational turn provides a way of correcting the excessive atomism of many individualistic perspectives that have been, and continue to be, influential in bioethics. Nonetheless, I would argue that most of the work reflecting the relational turn remains distinctively liberal in its respect for the ethical significance of the human individual. It moves away from individualism, but not from the value of individuality.In this review essay, I shall focus on how the relational turn has manifested itself in work on core concepts in bioethics, especially liberty and autonomy. Following a general review, I conclude with a brief consideration of two important recent books in this area: Jennifer Nedelsky's Law's Relations and Rachel Haliburton's Autonomy and the Situated Self. © 2016 The Hastings Center.

  18. Silicon Carbide Emitter Turn-Off Thyristor

    Jun Wang

    2008-01-01

    Full Text Available A novel MOS-controlled SiC thyristor device, the SiC emitter turn-off thyristor (ETO is a promising technology for future high-voltage switching applications because it integrates the excellent current conduction capability of a SiC thyristor with a simple MOS-control interface. Through unity-gain turn-off, the SiC ETO also achieves excellent Safe Operation Area (SOA and faster switching speeds than silicon ETOs. The world's first 4.5-kV SiC ETO prototype shows a forward voltage drop of 4.26 V at 26.5 A/cm2 current density at room and elevated temperatures. Tested in an inductive circuit with a 2.5 kV DC link voltage and a 9.56-A load current, the SiC ETO shows a fast turn-off time of 1.63 microseconds and a low 9.88 mJ turn-off energy. The low switching loss indicates that the SiC ETO could operate at about 4 kHz if 100 W/cm2 conduction and the 100 W/cm2 turn-off losses can be removed by the thermal management system. This frequency capability is about 4 times higher than 4.5-kV-class silicon power devices. The preliminary demonstration shows that the SiC ETO is a promising candidate for high-frequency, high-voltage power conversion applications, and additional developments to optimize the device for higher voltage (>5 kV and higher frequency (10 kHz are needed.

  19. Research of remote control system in turn by turn timing system

    Zhan Zhifeng; Xiao Yanguo; Ma Kui; Yin Zejie; Wu Xiaoyi

    2003-01-01

    In this paper, we introduce a remote control system which is used in a frequency dividing and time-delay module. This control system is based on client/server architecture, and RS232 serial communication protocol. This control system is used in timing system of NSRL turn by turn beam position monitor

  20. Determination of linear optics functions from turn-by-turn data

    Alexahin, Y; Gianfelice-Wendt, E, E-mail: alexahin@fnal.gov [Fermi National Accelerator Laboratory, P.O. Box 500, Batavia, Illinois 60510 (United States)

    2011-10-15

    A method for evaluation of coupled optics functions, detection of strong perturbing elements, determination of BPM calibration errors and tilts using turn-by-turn (TBT) data is presented as well as the new version of the Hamiltonian perturbation theory of betatron oscillations the method is based upon. An example of application of the considered method to the Tevatron is given.

  1. Electrical Machines: Turn-to-Turn Capacitance in Formed Windings with Rectangular Cross-Section Wire

    Djukic, Nenad; Encica, L.; Paulides, Johan

    2015-01-01

    Calculation of turn-to-turn capacitance (Ctt) in electrical machines (EMs) with formed windings with rectangular cross-section wire is presented. Three calculation methods are used for the calculation of Ctt in case of rectangular conductors – finite element (FE) method and two previously published

  2. Surface Corrosion Resistance in Turning of Titanium Alloy

    Rui Zhang

    2015-01-01

    Full Text Available This work addresses the issues associated with implant surface modification. We propose a method to form the oxide film on implant surfaces by dry turning to generate heat and injecting oxygen-rich gas at the turning-tool flank. The morphology, roughness, composition, and thickness of the oxide films in an oxygen-rich atmosphere were characterized using scanning electron microscopy, optical profiling, and Auger electron spectroscopy. Electrochemical methods were used to study the corrosion resistance of the modified surfaces. The corrosion resistance trends, analyzed relative to the oxide film thickness, indicate that the oxide film thickness is the major factor affecting the corrosion resistance of titanium alloys in a simulated body fluid (SBF. Turning in an oxygen-rich atmosphere can form a thick oxide film on the implant surface. The thickness of surface oxide films processed at an oxygen concentration of 80% was improved to 4.6 times that of films processed at an oxygen concentration of 21%; the free corrosion potential shifted positively by 0.357 V, which significantly improved the corrosion resistance of titanium alloys in the SBF. Therefore, the proposed method may (partially replace the subsequent surface oxidation. This method is significant for biomedical development because it shortens the process flow, improves the efficiency, and lowers the cost.

  3. Roles of beta-turns in protein folding: from peptide models to protein engineering.

    Marcelino, Anna Marie C; Gierasch, Lila M

    2008-05-01

    Reverse turns are a major class of protein secondary structure; they represent sites of chain reversal and thus sites where the globular character of a protein is created. It has been speculated for many years that turns may nucleate the formation of structure in protein folding, as their propensity to occur will favor the approximation of their flanking regions and their general tendency to be hydrophilic will favor their disposition at the solvent-accessible surface. Reverse turns are local features, and it is therefore not surprising that their structural properties have been extensively studied using peptide models. In this article, we review research on peptide models of turns to test the hypothesis that the propensities of turns to form in short peptides will relate to the roles of corresponding sequences in protein folding. Turns with significant stability as isolated entities should actively promote the folding of a protein, and by contrast, turn sequences that merely allow the chain to adopt conformations required for chain reversal are predicted to be passive in the folding mechanism. We discuss results of protein engineering studies of the roles of turn residues in folding mechanisms. Factors that correlate with the importance of turns in folding indeed include their intrinsic stability, as well as their topological context and their participation in hydrophobic networks within the protein's structure.

  4. Immediate Effects of Clock-Turn Strategy on the Pattern and Performance of Narrow Turning in Persons With Parkinson Disease.

    Yang, Wen-Chieh; Hsu, Wei-Li; Wu, Ruey-Meei; Lin, Kwan-Hwa

    2016-10-01

    Turning difficulty is common in people with Parkinson disease (PD). The clock-turn strategy is a cognitive movement strategy to improve turning performance in people with PD despite its effects are unverified. Therefore, this study aimed to investigate the effects of the clock-turn strategy on the pattern of turning steps, turning performance, and freezing of gait during a narrow turning, and how these effects were influenced by concurrent performance of a cognitive task (dual task). Twenty-five people with PD were randomly assigned to the clock-turn or usual-turn group. Participants performed the Timed Up and Go test with and without concurrent cognitive task during the medication OFF period. The clock-turn group performed the Timed Up and Go test using the clock-turn strategy, whereas participants in the usual-turn group performed in their usual manner. Measurements were taken during the 180° turn of the Timed Up and Go test. The pattern of turning steps was evaluated by step time variability and step time asymmetry. Turning performance was evaluated by turning time and number of turning steps. The number and duration of freezing of gait were calculated by video review. The clock-turn group had lower step time variability and step time asymmetry than the usual-turn group. Furthermore, the clock-turn group turned faster with fewer freezing of gait episodes than the usual-turn group. Dual task increased the step time variability and step time asymmetry in both groups but did not affect turning performance and freezing severity. The clock-turn strategy reduces turning time and freezing of gait during turning, probably by lowering step time variability and asymmetry. Dual task compromises the effects of the clock-turn strategy, suggesting a competition for attentional resources.Video Abstract available for more insights from the authors (see Supplemental Digital Content 1, http://links.lww.com/JNPT/A141).

  5. Crack turning in integrally stiffened aircraft structures

    Pettit, Richard Glen

    Current emphasis in the aircraft industry toward reducing manufacturing cost has created a renewed interest in integrally stiffened structures. Crack turning has been identified as an approach to improve the damage tolerance and fail-safety of this class of structures. A desired behavior is for skin cracks to turn before reaching a stiffener, instead of growing straight through. A crack in a pressurized fuselage encounters high T-stress as it nears the stiffener---a condition favorable to crack turning. Also, the tear resistance of aluminum alloys typically varies with crack orientation, a form of anisotropy that can influence the crack path. The present work addresses these issues with a study of crack turning in two-dimensions, including the effects of both T-stress and fracture anisotropy. Both effects are shown to have relation to the process zone size, an interaction that is central to this study. Following an introduction to the problem, the T-stress effect is studied for a slightly curved semi-infinite crack with a cohesive process zone, yielding a closed form expression for the future crack path in an infinite medium. For a given initial crack tip curvature and tensile T-stress, the crack path instability is found to increase with process zone size. Fracture orthotropy is treated using a simple function to interpolate between the two principal fracture resistance values in two-dimensions. An extension to three-dimensions interpolates between the six principal values of fracture resistance. Also discussed is the transition between mode I and mode II fracture in metals. For isotropic materials, there is evidence that the crack seeks out a direction of either local symmetry (pure mode I) or local asymmetry (pure mode II) growth. For orthotropic materials the favored states are not pure modal, and have mode mixity that is a function of crack orientation. Drawing upon these principles, two crack turning prediction approaches are extended to include fracture

  6. Topological side-chain classification of beta-turns: ideal motifs for peptidomimetic development.

    Tran, Tran Trung; McKie, Jim; Meutermans, Wim D F; Bourne, Gregory T; Andrews, Peter R; Smythe, Mark L

    2005-08-01

    Beta-turns are important topological motifs for biological recognition of proteins and peptides. Organic molecules that sample the side chain positions of beta-turns have shown broad binding capacity to multiple different receptors, for example benzodiazepines. Beta-turns have traditionally been classified into various types based on the backbone dihedral angles (phi2, psi2, phi3 and psi3). Indeed, 57-68% of beta-turns are currently classified into 8 different backbone families (Type I, Type II, Type I', Type II', Type VIII, Type VIa1, Type VIa2 and Type VIb and Type IV which represents unclassified beta-turns). Although this classification of beta-turns has been useful, the resulting beta-turn types are not ideal for the design of beta-turn mimetics as they do not reflect topological features of the recognition elements, the side chains. To overcome this, we have extracted beta-turns from a data set of non-homologous and high-resolution protein crystal structures. The side chain positions, as defined by C(alpha)-C(beta) vectors, of these turns have been clustered using the kth nearest neighbor clustering and filtered nearest centroid sorting algorithms. Nine clusters were obtained that cluster 90% of the data, and the average intra-cluster RMSD of the four C(alpha)-C(beta) vectors is 0.36. The nine clusters therefore represent the topology of the side chain scaffold architecture of the vast majority of beta-turns. The mean structures of the nine clusters are useful for the development of beta-turn mimetics and as biological descriptors for focusing combinatorial chemistry towards biologically relevant topological space.

  7. Somatic symptoms: an important index in predicting the outcome of depression at six-month and two-year follow-up points among outpatients with major depressive disorder.

    Hung, Ching-I; Liu, Chia-Yih; Wang, Shuu-Jiun; Juang, Yeong-Yuh; Yang, Ching-Hui

    2010-09-01

    Few studies have simultaneously compared the ability of depression, anxiety, and somatic symptoms to predict the outcome of major depressive disorder (MDD). This study aimed to compare the MDD outcome predictive ability of depression, anxiety, and somatic severity at 6-month and 2-year follow-ups. One-hundred and thirty-five outpatients (men/women=34/101) with MDD were enrolled. Depression and anxiety were evaluated by the Hamilton Depression Rating Scale, Hospital Anxiety and Depression Scale, and depression subscale of the Depression and Somatic Symptoms Scale (DSSS). Somatic severity was evaluated by the somatic subscale of the DSSS. Subjects undergoing pharmacotherapy in the follow-up month were categorized into the treatment group; the others were categorized into the no-treatment group. Multiple linear regressions were used to identify the scales most powerful in predicting MDD outcome. Among the 135 subjects, 119 and 106 completed the 6-month and 2-year follow-ups, respectively. Somatic severity at baseline was correlated with the outcomes of the three scales at the two follow-ups. After controlling for demographic variables, somatic severity independently predicted most outcomes of the three scales at the two follow-ups in the no-treatment group and the cost of pharmacotherapy and DSSS score at the 6-month follow-up in the treatment group. Division of the subjects into treatment and no-treatment groups was not based on randomization and bias might have been introduced. Somatic severity was the most powerful index in predicting MDD outcome. Psychometric scales with appropriate somatic symptom items may be more accurate in predicting MDD outcome. 2010 Elsevier B.V. All rights reserved.

  8. Towards a Practice Turn in EU Studies

    Adler-Nissen, Rebecca

    2016-01-01

    This article explores how practice theory can be recruited for the study of European integration. New generations of EU researchers are fascinated by the prospect of leaving the armchair and studying the people and artefacts that make the EU on an everyday level. This article surveys key practice......-oriented, anthropological and micro-sociological studies of the EU and European integration and shows how their findings challenge more traditional understandings of the dynamics of European integration. Moving beyond a stock-taking, the article distinguishes between ‘order- ing’ and ‘disordering’ practices and explores...... the potential of a practice turn in EU studies for both theory (overcoming dualism, replacing substantialism with processualism and rethinking power) and methods (including unstructured interviews, fieldwork and participant observation). A practice turn will force us to rethink core assumptions about the EU...

  9. Measurement of tool forces in diamond turning

    Drescher, J.; Dow, T.A.

    1988-12-01

    A dynamometer has been designed and built to measure forces in diamond turning. The design includes a 3-component, piezoelectric transducer. Initial experiments with this dynamometer system included verification of its predicted dynamic characteristics as well as a detailed study of cutting parameters. Many cutting experiments have been conducted on OFHC Copper and 6061-T6 Aluminum. Tests have involved investigation of velocity effects, and the effects of depth and feedrate on tool forces. Velocity has been determined to have negligible effects between 4 and 21 m/s. Forces generally increase with increasing depth of cut. Increasing feedrate does not necessarily lead to higher forces. Results suggest that a simple model may not be sufficient to describe the forces produced in the diamond turning process.

  10. When attempts at robbing prey turn fatal

    Dejean, Alain; Corbara, Bruno; Azémar, Frédéric; Carpenter, James M.

    2012-07-01

    Because group-hunting arboreal ants spread-eagle insect prey for a long time before retrieving them, these prey can be coveted by predatory flying insects. Yet, attempting to rob these prey is risky if the ant species is also an effective predator. Here, we show that trying to rob prey from Azteca andreae workers is a fatal error as 268 out of 276 potential cleptobionts (97.1 %) were captured in turn. The ant workers hunt in a group and use the "Velcro®" principle to cling firmly to the leaves of their host tree, permitting them to capture very large prey. Exceptions were one social wasp, plus some Trigona spp. workers and flies that landed directly on the prey and were able to take off immediately when attacked. We conclude that in this situation, previously captured prey attract potential cleptobionts that are captured in turn in most of the cases.

  11. Joint classification and contour extraction of large 3D point clouds

    Hackel, Timo; Wegner, Jan D.; Schindler, Konrad

    2017-08-01

    We present an effective and efficient method for point-wise semantic classification and extraction of object contours of large-scale 3D point clouds. What makes point cloud interpretation challenging is the sheer size of several millions of points per scan and the non-grid, sparse, and uneven distribution of points. Standard image processing tools like texture filters, for example, cannot handle such data efficiently, which calls for dedicated point cloud labeling methods. It turns out that one of the major drivers for efficient computation and handling of strong variations in point density, is a careful formulation of per-point neighborhoods at multiple scales. This allows, both, to define an expressive feature set and to extract topologically meaningful object contours. Semantic classification and contour extraction are interlaced problems. Point-wise semantic classification enables extracting a meaningful candidate set of contour points while contours help generating a rich feature representation that benefits point-wise classification. These methods are tailored to have fast run time and small memory footprint for processing large-scale, unstructured, and inhomogeneous point clouds, while still achieving high classification accuracy. We evaluate our methods on the semantic3d.net benchmark for terrestrial laser scans with >109 points.

  12. FCC-hh turn-around cycle

    Alemany Fernandez, Reyes; Bartmann, Wolfgang; Buffat, Xavier; Niemi, Arto; Schulte, Daniel; Solfaroli Camillocci, Matteo; Stoel, Linda

    2016-01-01

    The turn-around cycle time of a collider is defined as the time spent between the end of stable beams and the start of the next stable beams period, and its calculation is of fundamental importance. On one side it is a crucial ingredient for the computation of the optimal time spent in luminosity production, which defines the integrated luminosity per fill or store. On the other side, combined with the availability and reliability of the machine, it allows to perform a detailed breakdown of the operational performance of the collider over an operational season, i.e. percentage of time in stable beams and beam in the machine with respect to down time. This paper presents a preliminary operational cycle definition for the hadron-hadron Future Circular Collider, as a base line for estimating the corresponding turn-around time. The cycle definition is based on the Large Hadron Collider (LHC) operational cycle. Two turn-around times are presented, the theoretical one and a more realistic one based on the LHC exper...

  13. Beam Optics Measurements Through Turn by Turn Beam Position Data in the SLS

    Zisopoulos, P; Streun, A; Ziemann, v

    2013-01-01

    Refined Fourier analysis of turn-by-turn (TBT) transverse position data measurements can be used for determining several beam properties of a ring, such as transverse tunes, optics functions, phases, chromatic properties and coupling. In particular, the Numerical Analysis of Fundamental Frequencies (NAFF) algorithm is used to analyse TBT data from the Swiss Light Source (SLS) storage ring in order to estimate on and off-momentum beam characteristics. Of particular interest is the potential of using the full position information within one turn in order to measure beam optics properties.

  14. First turn around strategy for RHIC

    Milutinovic, J.; Ruggiero, A.G.

    1991-06-01

    We present a strategy for achieving the so-called first turn around in RHIC. The strategy is based on the same method we had proposed to correct a distorted closed orbit in RHIC, i.e., on a generalization of the local three-bump method. We found out that the method is very effective in passing the beam through a non-ideal, insufficiently known, machine. We tested that software on ten different Gaussian distributions of dominant orbit distorting lattice imperfections. The perturbed lattice was generated by the code PATRIS, which was also adapted to control the newly developed software. In all of the ten distributions the software was capable of passing the beam through in 2--3 injection attempts, at full sextupole strength. It was also determined that once the beam makes the first turn around and all the correctors are energized, it stays in the machine for at least several hundred turns that we had checked. The quality of the orbit, that was established in this way, was also found to be very good, i.e., the residual distortions at the places of large beta function were much less than one millimeter. With one or two monitors/correctors broken, the software established a first turn around without any extra difficulties. The quality of such orbit was, of course, somewhat degraded, especially around the broken devices. It was also observed that, in the process of actual closing, the beam develops free betatron oscillations in the amplitude range of 1--5 mm, which can be reduced either by changing the injection conditions to better match the actual closed orbit or by an appropriate damping device. The hardware proposed for RHIC is more than sufficient to meet the demands of the first turn controlling software. The maximum kick angle to be applied to the beam would require less than 2/3 of the corrector's top strength even at the top magnetic rigidity Bρ = 850 T·m, which means that the correctors will be performing an easy task at injection

  15. Interferometric evaluation of diamond-turned mirrors for CO2 laser fusion

    Munroe, J.L.

    1979-01-01

    It is shown that single-point diamond-turned optics exhibit different characteristics than conventionally manufactured optics and the type of information required by the machinist is quite different than the information that would be required by an optician. It was also seen, with Antares being a good example, that single-point diamond turning allows the manufacture of geometries and scales that might be unthinkable if conventional manufacturing were to be used. As single-point diamond turning continues to improve in quality, machined optics will find application at shorter and shorter wavelengths. A whole new formalism to describe manufacturing errors in terms meaningful to the machinist will have to be developed

  16. Dynamic range majority data structures

    Elmasry, Amr Ahmed Abd Elmoneim; He, Meng; Munro, J. Ian

    2011-01-01

    Given a set P of n coloured points on the real line, we study the problem of answering range α-majority (or "heavy hitter") queries on P. More specifically, for a query range Q, we want to return each colour that is assigned to more than an α-fraction of the points contained in Q. We present a ne...

  17. Lattice modeling and calibration with turn-by-turn orbit data

    Xiaobiao Huang

    2010-11-01

    Full Text Available A new method that explores turn-by-turn beam position monitor (BPM data to calibrate lattice models of accelerators is proposed. The turn-by-turn phase space coordinates at one location of the ring are first established using data from two BPMs separated by a simple section with a known transfer matrix, such as a drift space. The phase space coordinates are then tracked with the model to predict positions at other BPMs, which can be compared to measurements. The model is adjusted to minimize the difference between the measured and predicted orbit data. BPM gains and rolls are included as fitting variables. This technique can be applied to either the entire or a section of the ring. We have tested the method experimentally on a part of the SPEAR3 ring.

  18. Lattice modeling and calibration with turn-by-turn orbit data

    Huang, Xiaobiao; Sebek, Jim; Martin, Don

    2010-11-01

    A new method that explores turn-by-turn beam position monitor (BPM) data to calibrate lattice models of accelerators is proposed. The turn-by-turn phase space coordinates at one location of the ring are first established using data from two BPMs separated by a simple section with a known transfer matrix, such as a drift space. The phase space coordinates are then tracked with the model to predict positions at other BPMs, which can be compared to measurements. The model is adjusted to minimize the difference between the measured and predicted orbit data. BPM gains and rolls are included as fitting variables. This technique can be applied to either the entire or a section of the ring. We have tested the method experimentally on a part of the SPEAR3 ring.

  19. CERN PS Optical Properties Measured with Turn-By-Turn Orbit Data

    Bach, T; Giovannozzi, M; Hernalsteens, C; Lachaize, A; Sterbini, G; Tom´as, R; Wasef, R

    2013-01-01

    The performance of the CERN Proton Synchrotron (PS) has been constantly increasing over the years both in terms of beam parameters (intensity and brightness) and beam manipulations (transverse and longitudinal splitting). This implies a very good knowledge of the linear and non-linear model of the ring. In this paper we report on a detailed campaign of beam measurements based on turn-by-turn orbit data aimed at measuring the optics in several conditions as well as the resonance driving terms.

  20. Hummingbirds control turning velocity using body orientation and turning radius using asymmetrical wingbeat kinematics.

    Read, Tyson J G; Segre, Paolo S; Middleton, Kevin M; Altshuler, Douglas L

    2016-03-01

    Turning in flight requires reorientation of force, which birds, bats and insects accomplish either by shifting body position and total force in concert or by using left-right asymmetries in wingbeat kinematics. Although both mechanisms have been observed in multiple species, it is currently unknown how each is used to control changes in trajectory. We addressed this problem by measuring body and wingbeat kinematics as hummingbirds tracked a revolving feeder, and estimating aerodynamic forces using a quasi-steady model. During arcing turns, hummingbirds symmetrically banked the stroke plane of both wings, and the body, into turns, supporting a body-dependent mechanism. However, several wingbeat asymmetries were present during turning, including a higher and flatter outer wingtip path and a lower more deviated inner wingtip path. A quasi-steady analysis of arcing turns performed with different trajectories revealed that changes in radius were associated with asymmetrical kinematics and forces, and changes in velocity were associated with symmetrical kinematics and forces. Collectively, our results indicate that both body-dependent and -independent force orientation mechanisms are available to hummingbirds, and that these kinematic strategies are used to meet the separate aerodynamic challenges posed by changes in velocity and turning radius. © 2016 The Author(s).

  1. Factors influencing turning and its relationship with falls in individuals with Parkinson's disease.

    Fang-Yu Cheng

    Full Text Available BACKGROUND: Falls are a major problem for people with Parkinson's disease (PD. Many studies indicate that more than 50% of people with PD have difficulty in turning that may lead to falls during daily activities. The aims of this study were to identify the relationship between turning performance and falls, and to determine the factors that influence turning performance. METHODS: This study examined 45 patients with idiopathic PD (Hoehn and Yahr stage 1-3 using a battery of tests, including 180° turn time, balance, and muscle strength. The levels of disease severity and freezing of gait were also measured. The number of falls in the past 6 months was recorded. RESULTS: Sixteen out of forty-five participants experienced falls in the past 6 months. A receiver operating characteristic curve showed that turn time was highly related to falls [more affected side: sensitivity = 0.81, specificity = 0.79, area under the curve (AUC = 0.83; less affected side: sensitivity = 0.88, specificity = 0.76, AUC = 0.83]. The most important factor influencing turn time was balance ability (both sides: p = 0.000 according to the regression model. Correlations between turn time and dynamic balance were further established with reaction time, movement velocity, endpoint excursion, and maximal excursion of the LOS (limits of stability test. CONCLUSION: The time needed to complete a 180° turn during the SQT (step/quick turn test is a good index to differentiate fallers from non-fallers in persons with PD. Turn time is most influenced by balance. Furthermore, balance control, especially in an anterior or sideways direction, is important for turning performance.

  2. Kinematical Comparison of the 200 m Backstroke Turns between National and Regional Level Swimmers

    Veiga, Santiago; Cala, Antonio; Frutos, Pablo González; Navarro, Enrique

    2013-01-01

    The aims of this investigation were to determine the evolution of selected turn variables during competitive backstroke races and to compare these kinematic variables between two different levels of swimmers. Sixteen national and regional level male swimmers participant in the 200 m backstroke event at the Spanish Swimming Championships in short course (25 m) were selected to analyze their turn performances. The individual distances method with two-dimensional Direct Linear Transformation (2D-DLT) algorithms was used to perform race analyses. National level swimmers presented a shorter “turn time”, a longer “distance in”, a faster “underwater velocity” and “normalized underwater velocity”, and a faster “stroking velocity” than regional level swimmers, whereas no significant differences were detected between levels for the “underwater distance”. National level swimmers maintained similar “turn times” over the event and increased “underwater velocity” and “normalized underwater velocity” in the last (seventh) turn segment, whereas regional level swimmers increased “turn time” in the last half of the race. For both national and regional level swimmers, turn “underwater distance” during the last three turns of the race was significantly shorter while no significant differences in distance into the wall occurred throughout the race. The skill level of the swimmers has an impact on the competitive backstroke turn segments. In a 200 m event, the underwater velocity should be maximized to maintain turn proficiency, whereas turn distance must be subordinated to the average velocity. Key Points The underwater turn velocity is as a critical variable related to the swimmers’ level of skill in a 200 m backstroke event. Best swimmers perform faster but no longer turn segments during a 200 m backstroke event. Best swimmers maintain their turn performance throughout the 200 m backstroke event by increasing the underwater velocity

  3. Alchemical inflation: inflaton turns into Higgs

    Nakayama, Kazunori; Takahashi, Fuminobu

    2012-11-01

    We propose a new inflation model in which a gauge singlet inflaton turns into the Higgs condensate after inflation. The inflationary path is characterized by a moduli space of supersymmetric vacua spanned by the inflaton and Higgs field. The inflation energy scale is related to the soft supersymmetry breaking, and the Hubble parameter during inflation is smaller than the gravitino mass. The initial condition for the successful inflation is naturally realized by the pre-inflation in which the Higgs plays a role of the waterfall field.

  4. Alchemical inflation: inflaton turns into Higgs

    Nakayama, Kazunori; Takahashi, Fuminobu

    2012-01-01

    We propose a new inflation model in which a gauge singlet inflaton turns into the Higgs condensate after inflation. The inflationary path is characterized by a moduli space of supersymmetric vacua spanned by the inflaton and Higgs field. The inflation energy scale is related to the soft supersymmetry breaking, and the Hubble parameter during inflation is smaller than the gravitino mass. The initial condition for the successful inflation is naturally realized by the pre-inflation in which the Higgs plays a role of the waterfall field

  5. An elevator for lifting and turning pipes

    Melnikov, S.P.; Borchenkov, G.I.; Komarov, V.N.; Lebedev, D.A.

    1983-01-01

    An elevator is proposed for lifting and turning pipes, which includes a body and a bushing hinged to it with projections and a shank with a threaded adapter and cams which interact with the projections of the bushing. In order to increase the operational safety of the device through ensuring the capability of eliminating drops in the torque from the shank to the body when raising and extracting drill pipes, the body is equipped with eccentric cams rigidly connected to it, while the shank is equipped with a ring movable connected with it. The eccentric cams are installed between the bushing and the body with the capability of interacting with the shank ring.

  6. Coupling effects on turning points of infectious diseases epidemics in scale-free networks

    Kim, Kiseong; Lee, Sangyeon; Lee, Doheon; Lee, Kwang Hyung

    2017-01-01

    Background Pandemic is a typical spreading phenomenon that can be observed in the human society and is dependent on the structure of the social network. The Susceptible-Infective-Recovered (SIR) model describes spreading phenomena using two spreading factors; contagiousness (?) and recovery rate (?). Some network models are trying to reflect the social network, but the real structure is difficult to uncover. Methods We have developed a spreading phenomenon simulator that can input the epidemi...

  7. Turning Points in Qualitative Research: Tying Knots in a Handkerchief. Crossroads in Qualitative Inquiry Series.

    Lincoln, Yvonna S., Ed.; Denzin, Norman K., Ed.

    The chapters of this volume traces the changes in the discipline of qualitative inquiry over the last five decades. The collection serves as a textbook for training scholars in the history and trajectory of qualitative research. The chapters of part 1, The Revolution of Representation: Feminist and Race/Ethnic Studies Discourses, are: (1) Situated…

  8. Ultrasonically Assisted Single Point Diamond Turning of Optical Mold of Tungsten Carbide

    Zhanjie Li

    2018-02-01

    Full Text Available To realize high efficiency, low/no damage and high precision machining of tungsten carbide used for lens mold, a high frequency ultrasonic vibration cutting system was developed at first. Then, tungsten carbide was precisely machined with a polycrystalline diamond (PCD tool assisted by the self-developed high frequency ultrasonic vibration cutting system. Tool wear mechanism was investigated in ductile regime machining of tungsten carbide. The cutter back-off phenomenon in the process was analyzed. The subsequent experimental results of ultra-precision machining with a single crystal diamond tool showed that: under the condition of high frequency ultrasonic vibration cutting, nano-scale surface roughness can be obtained by the diamond tool with smaller tip radius and no defects like those of ground surface were found on the machined surface. Tool wear mechanisms of the single crystal diamond tool are mainly abrasive wear and micro-chipping. To solve the problem, a method of inclined ultrasonic vibration cutting with negative rake angle was put forward according to force analysis, which can further reduce tool wear and roughness of the machined surface. The investigation was important to high efficiency and quality ultra-precision machining of tungsten carbide.

  9. EUROPEAN EMISSION TRADING SCHEME AT A TURNING POINT – FROM THE PILOT PHASE TO POST-2012

    Aura Carmen Slate

    2011-09-01

    Full Text Available Climate change action has become a top priority for the European governments and for the European Union. Since the polluters are part of the energy-intensive industries, the mechanisms designed to reduce greenhouse gas emissions should focus on the economic sector as a primary source of concern. Therefore, environmental issues interrelate with the economic ones and one viable expression of this relation is the EU ETS, a cap-and-trade mechanism. The ETS started with a pilot phase in year 2005 and will continue with a third phase after 2012, period which coincides with the end of Kyoto’s commitment. Although statistical data prove that the EU ETS is becoming more efficient with each phase, in the absence of global involvement the efforts invested in the scheme will be made in vain.

  10. From Wage Rigidities to Labour Market Rigidities: A Turning-Point in Explaining Equilibrium Unemployment?

    Marco Guerrazzi; Nicola Meccheri

    2009-01-01

    This paper offers a critical discussion of the concept of labour market rigidity relevant to explaining unemployment. Starting from Keynes’s own view, we discuss how the concept of labour market flexibility has changed over time, involving nominal or real wage flexibility, contract flexibility or labour market institution flexibility. We also provide a critical assessment of the factors that lead the search framework highlighting labour market rigidities (frictions) to challenge the more wide...

  11. Is Educational Achievement a Turning Point for Incarcerated Delinquents across Race and Sex?

    Blomberg, Thomas G.; Bales, William D.; Piquero, Alex R.

    2012-01-01

    Research has linked the role of education to delinquency, but much of the focus has been on general population samples and with little attention to demographic differences. Employing a cumulative disadvantage framework that integrates elements of informal social control and labeling theories, this article examines whether academic achievement…

  12. Brit Crit: Turning Points in British Rock Criticism 1960-1990

    Gudmundsson, Gestur; Lindberg, U.; Michelsen, M.

    2002-01-01

    had national specific traits and there have been more profound paradigm shifts than in American rock criticism. This is primarily explained by the fact that American rock criticism is more strongly connected to general cultural history, while the UK rock criticism has been more alienated from dominant......The article examines the development of rock criticism in the United Kingdom from the perspective of a Bourdieuan field-analysis. Early British rock critics, like Nik Cohn, were international pioneers, a few years later there was a strong American influence, but British rock criticism has always...... culture and more linked to youth culture. However, also in the UK rock criticism has been part and parcel of the legitimation of rock culture and has moved closer to dominant fields and positions in the cultural hierarchy....

  13. Is the GAIN Act a turning point in new antibiotic discovery?

    Brown, Eric D

    2013-03-01

    The United States GAIN (Generating Antibiotic Incentives Now) Act is a call to action for new antibiotic discovery and development that arises from a ground swell of concern over declining activity in this therapeutic area in the pharmaceutical sector. The GAIN Act aims to provide economic incentives for antibiotic drug discovery in the form of market exclusivity and accelerated drug approval processes. The legislation comes on the heels of nearly two decades of failure using the tools of modern drug discovery to find new antibiotic drugs. The lessons of failure are examined herein as are the prospects for a renewed effort in antibiotic drug discovery and development stimulated by new investments in both the public and private sector.

  14. Rothamsted’s aphid-resistant wheat – a turning point for GMOs?

    Lynas Mark

    2012-10-01

    Full Text Available Abstract Rothamsted Research mounted a successful counter-campaign in response to a threat by environmental protesters to destroy their research project examining aphid-resistant genetically modified (GM wheat. This involved the use of online media, petitions, and other tools, by which researchers engaged directly with media and the general public in defense of their work. Lessons are suggested for other researchers in the controversial field of GM plant breeding.

  15. Bernhard Riemann 1826-1866 Turning Points in the Conception of Mathematics

    Laugwitz, Detlef

    2008-01-01

    The name of Bernard Riemann is well known to mathematicians and physicists around the world. College students encounter the Riemann integral early in their studies. Real and complex function theories are founded on Riemann’s work. Einstein’s theory of gravitation would be unthinkable without Riemannian geometry. In number theory, Riemann’s famous conjecture stands as one of the classic challenges to the best mathematical minds and continues to stimulate deep mathematical research. The name is indelibly stamped on the literature of mathematics and physics. This book, originally written in German and presented here in an English-language translation, examines Riemann’s scientific work from a single unifying perspective. Laugwitz describes Riemann’s development of a conceptual approach to mathematics at a time when conventional algorithmic thinking dictated that formulas and figures, rigid constructs, and transformations of terms were the only legitimate means of studying mathematical objects. David Hi...

  16. Stressors and Turning Points in High School and Dropout: A Stress Process, Life Course Framework

    Dupéré, Véronique; Leventhal, Tama; Dion, Eric; Crosnoe, Robert; Archambault, Isabelle; Janosz, Michel

    2015-01-01

    High school dropout is commonly seen as the result of a long-term process of failure and disengagement. As useful as it is, this view has obscured the heterogeneity of pathways leading to dropout. Research suggests, for instance, that some students leave school not as a result of protracted difficulties but in response to situations that emerge…

  17. Turning point in the study of human factors: From centurion to modern man

    Bienvenu, C.; Larchier-Boulanger, J.

    1988-01-01

    For many years, it has been traditional to declare the superiority of man over the machine. The notion of man's fragility in confrontation with his machine only emerged slowly, and indeed as a result of a succession of catastrophes. The first of these date back to the railway age (signal errors), while more recent instances are to be found in the fields of aviation (pilot errors) and nuclear power. Increasing attention and in-depth studies have been devoted to the relationship between man and the machine. The following topics are discussed: the ergonomic era, emergence of the group situation, the institutional aspect, and the weight of society

  18. Revealing turning points in ecosystem functioning over the Northern Eurasian agricultural frontier

    Horion, Stéphanie Marie Anne F; Prishchepov, Alexander; Verbesselt, Jan

    2016-01-01

    in such highly complex systems. In this research a piece-wise linear regression method was used for breakpoint detection in Rain-Use Efficiency (RUE) time series and a classification of ecosystem response types was produced. Supported by earth observation data, field data and expert knowledge, this study...

  19. 17th century – a turning point in the development of modern science

    Hebrang Grgić, Ivana

    2007-01-01

    This paper explains the development of modern science and scientific comunication in the 17th century. Postulates of Modern Age philosophers René Descartes and Francis Bacon are interpreted. The need for scientific communication resulted in organizing scientific guilds as well as in the publishing of the first two scientific journals – Journal des Sçavans and Philosophical Transactions. The beginning of intellectual property protection in European countries and the early development of librar...

  20. THE SOMALISATION OF POLITICAL ISLAM: TURNING POINT FOR THE CLASH OF ISLAMISMS IN AFRICA

    Ignacio Gutiérrez de Terán Gómez-Benita

    2011-04-01

    Full Text Available This article covers – firstly and generally speaking – the gradual process of confrontation between traditional African Islam (and particularly the Sufi brotherhoods and the Salafist tendencies that became established in the continent some time ago. Taking the chronic case of Somalia as an example, the author stresses the fact that in addition to doctrinal differences, it is also important to note that social, economic and cultural factors have also helped to aggravate tensions. These, nevertheless, have even erupted in the heart of organisations backing political Islam, in many cases of Wahhabi origin, owing partly to geostrategic determining factors, and partly to the turbulent debate on the advisability of incorporating processes of national reform and reconciliation. Furthermore, and in a way that is reminiscent of a number of antecedents in countries such as Algeria and Afghanistan, the controversy is focused around which strategy to adopt to fight the local leaders who have been labelled as corrupt, and how to link up with the regional and international powers involved in the conflict. Thus, an extreme Somalisation has also reached African Islamist movements, as can be seen in the current fragmentation of Islamism over much of the continent.

  1. Security of gas supply in open markets. LNG and power at a turning point

    2004-01-01

    Since the 'IEA Study on Security of Gas Supply' was published in 1995, many member countries have started to open their gas and electricity markets to competition. Governments progressively withdrew from directly managing the gas sector; they concentrate now on setting objectives and the framework for competition. With the continued growth of gas demand and the decline of domestic reserves, most IEA countries have to import more gas, mainly for power generation. This requires access to gas reserves at competitive conditions, as well as timely investment in new infrastructure to ensure a reliable gas supply. Reform has led to open markets, where supply and demand are balanced by the market. In the gas sector, supply is capacity-bound and large parts of the demand side are inelastic. The study looks at how governments and other stakeholders in IEA countries respond to the need to create a framework that enables the players to deliver secure and reliable gas supply at the border and all the way down to the final customer. This book analyses the most recent developments in security of gas supply and reliability in all IEA regions in the context of open markets and in view of the new demand and supply trends. A CD-Rom featuring the positions of the main stakeholders (governments, regulators, industry, customers and other organisations) is included with the publication. 'Security of Gas Supply in Open Markets' is a follow-up of 'Flexibility in Natural Gas Supply and Demand' in the IEA series on energy market reforms

  2. Turning Point: Operation Allied Force and the Allure of Air Power

    2014-06-13

    Air Force Base in Nevada, from “a windowless bunker, lit by constantly flickering computer screens,” a Predator drone operator zoomed in on the...how the Army would mitigate risks to the Apaches by using artillery to suppress Serb air defenses before the Apaches went on their deep strike...conflict.” 162Clark, Waging Modern War, 236-7. 163Drozdiak, A22. 164To mitigate alliance member concerns, NATO did not officially refer to

  3. Hatchability of chicken eggs as influenced by turning frequency in ...

    An experiment was conducted to determine the influence of turning frequency of chicken eggs on hatchability in hurricane lantern incubator. There were four treatments in which eggs were not turned in treatment one (control), those in treatment two were turned once daily (morning), treatment three turned twice daily ...

  4. Hatchability of chicken eggs as influenced by turning frequency in ...

    STORAGESEVER

    2008-12-03

    Dec 3, 2008 ... Brake (2004) confirmed that absence of turning resulted in presentation of the head in the small end of the egg. Egg turning facilitated the transfer of yolk nutrients to the embryo via the sub-embryonic fluid (Deeming, 1989a). With modern incubators, automatic turning devices allow the eggs to be turned on ...

  5. Document turn-over analysis to determine need of NPP construction in build-up structures of reinforced concrete

    Vojpe, D.K.; Lyubavin, V.K.

    1986-01-01

    Document turn-over to determine used of NPP construction in build-up structures of reinforced concrete is carried out. Ways of improving determination of needs of NPP construction board in the mentioned structures are pointed out

  6. Turning the appliance market around towards A++

    Noergaard, Joergen S.; Guldbrandsen, Tom [Dept. of Civil Engineering, Technical Univ. of Denmark (Denmark); Brange, Birgitte; Karbo, Peter [Elsparefonden (Denmark)

    2007-07-01

    In an effort to exploit better the labelling schemes for appliances the Danish Electricity Saving Trust has run some campaigns on cold appliances. In 1999 focus was on getting people to choose A-rated models, the 2004 campaign focussed on A+, and in 2005 on A++. These campaigns and their results are described in the paper and some conclusions are drawn.The campaigns have consisted of various elements, namely 1) a general information about the campaigns, 2) a subsidy offered temporarily during some months to people buying the A, A+ and A++ models, 3) a website where people can easily find the most energy efficient model within their specification, and 4) in the website are also listed the shops, where consumers can get the appliances at lowest prices. The latter was the most innovative and maybe also the most effective measure in the package.Results showed up as a permanent U-turn of the market in the course of a few years. Where models C, D, E earlier dominated the market, the A, A+ and A++, came to dominate as the standard models in stock. Consequently, their prices dropped significantly. The theory of a rational market behavior is based on some assumptions, one being that full information is available to all actors. The website identifying to the consumers the shops with the lowest priced efficient models was a step in that direction, and the result did not fail to turn up.

  7. Ductile-regime turning of germanium and silicon

    Blake, Peter N.; Scattergood, Ronald O.

    1989-01-01

    Single-point diamond turning of silicon and germanium was investigated in order to clarify the role of cutting depth in coaxing a ductile chip formation in normally brittle substances. Experiments based on the rapid withdrawal of the tool from the workpiece have shown that microfracture damage is a function of the effective depth of cut (as opposed to the nominal cutting depth). In essence, damage created by the leading edge of the tool is removed several revolutions later by lower sections of the tool edge, where the effective cutting depth is less. It appears that a truly ductile cutting response can be achieved only when the effective cutting depth, or critical chip thickness, is less than about 20 nm. Factors such as tool rake angle are significant in that they will affect the actual value of the critical chip thickness for transition from brittle to ductile response. It is concluded that the critical chip thickness is an excellent parameter for measuring the effects of machining conditions on the ductility of the cut and for designing tool-workpiece geometry in both turning and grinding.

  8. Development of a Low Cost MQL Setup for Turning Operations

    Islam Sumaiya

    2017-01-01

    Full Text Available In this study, the effect of MQL application on the tool wear, surface roughness and chip formation in turning Aluminum alloy 6061 is investigated. Experiments were carried out by plain turning of an Aluminum bar with varying depth of cut, cutting speeds (spindle speed and cutting environments (Dry, Wet and MQL. A newly designed, cost efficient and portable MQL setup was developed for this study. For each experimental trial, five passes were carried out in order to promote the formation of tool wear. After each pass, the tool surface was examined under a microscope and the surface roughness was measured using a stylus based surface tester. The extent of tool wear from each pass is measured by using ImageJ software. Chips were collected after the five passes and were physically examined. The newly designed MQL delivery system was successful in delivering a fine mist of lubricant at the cutting point. MQL lubrication provided lower surface roughness and tool wear values compared to wet and dry conditions due to effective temperature reduction and improved lubrication penetration of cutting zones, as well as better chip flushing. Chip formed under MQL conditions had reduced chip thickness due to reduced temperatures. MQL was found to have the greatest positive impact on tool wear and surface roughness parameters based on ANOVA results.

  9. A major point in the relativistic gravitation theory

    Draminsky, P.

    1976-01-01

    In this article Draminsky gives his answer to those critics who, while noting his objections to Einstein's General Theory of Relativity, have been uncertain what Draminsky would put in its place. Draminsky's theory is based on the same foundation as Einstein's, that real space in a gravitational field is non-Euclidean. This space is contracted or dilated in relation to time in different ways from place to place. The tracks of free particles in such space are geodetic lines calculated from second-order differential equations, the form and solution of which is described. The single assumption required to provide a rigid and exact field equation is that the inertial mass of a particle in a local system of reference is the same as its gravitational mass measured and operative in the reference system: which is the 'identity principle' of Einstein formulated in the only entirely precise manner. (A.D.N.)

  10. Emittance and damping of electrons in the neighborhood of resonance fixed points

    Crosbie, E.A.

    1993-01-01

    The stable fixed points generated by nonlinear field harmonics in a cyclic lattice define a multiturn stable orbit. The position of the orbit for each turn in each magnet of the lattice determines the betatron tunes and lattice dispersion functions describing the linear motion of charged particles with respect to the stable orbit. Since the position of the fixed points is dependent in part on the central orbit tune, it turns out that the multiturn orbit dispersion function depends to a large extent on the central orbit chromaticity. In particular, the horizontal partition number can be made to vary from values less than zero (horizontal antidamping for electrons) to values greater than three (longitudinal antidamping). The central orbit chromaticity therefore plays a major role in determining the characteristic emittance of an electron beam with respect to the multiturn orbit

  11. BetaTPred: prediction of beta-TURNS in a protein using statistical algorithms.

    Kaur, Harpreet; Raghava, G P S

    2002-03-01

    beta-turns play an important role from a structural and functional point of view. beta-turns are the most common type of non-repetitive structures in proteins and comprise on average, 25% of the residues. In the past numerous methods have been developed to predict beta-turns in a protein. Most of these prediction methods are based on statistical approaches. In order to utilize the full potential of these methods, there is a need to develop a web server. This paper describes a web server called BetaTPred, developed for predicting beta-TURNS in a protein from its amino acid sequence. BetaTPred allows the user to predict turns in a protein using existing statistical algorithms. It also allows to predict different types of beta-TURNS e.g. type I, I', II, II', VI, VIII and non-specific. This server assists the users in predicting the consensus beta-TURNS in a protein. The server is accessible from http://imtech.res.in/raghava/betatpred/

  12. Turning on gravity with the Higgs mechanism

    Alexander, Stephon; Barrow, John D; Magueijo, João

    2016-01-01

    We investigate how a Higgs mechanism could be responsible for the emergence of gravity in extensions of Einstein theory, with a suitable low energy limit. In this scenario, at high energies, symmetry restoration could ‘turn off’ gravity, with dramatic implications for cosmology and quantum gravity. The sense in which gravity is muted depends on the details of the implementation. In the most extreme case gravity’s dynamical degrees of freedom would only be unleashed after the Higgs field acquires a non-trivial vacuum expectation value, with gravity reduced to a topological field theory in the symmetric phase. We might also identify the Higgs and the Brans–Dicke fields in such a way that in the unbroken phase Newton’s constant vanishes, decoupling matter and gravity. We discuss the broad implications of these scenarios. (letter)

  13. Autism genes keep turning up chromatin.

    Lasalle, Janine M

    2013-06-19

    Autism-spectrum disorders (ASD) are complex genetic disorders collectively characterized by impaired social interactions and language as well as repetitive and restrictive behaviors. Of the hundreds of genes implicated in ASD, those encoding proteins acting at neuronal synapses have been most characterized by candidate gene studies. However, recent unbiased genome-wide analyses have turned up a multitude of novel candidate genes encoding nuclear factors implicated in chromatin remodeling, histone demethylation, histone variants, and the recognition of DNA methylation. Furthermore, the chromatin landscape of the human genome has been shown to influence the location of de novo mutations observed in ASD as well as the landscape of DNA methylation underlying neurodevelopmental and synaptic processes. Understanding the interactions of nuclear chromatin proteins and DNA with signal transduction pathways and environmental influences in the developing brain will be critical to understanding the relevance of these ASD candidate genes and continued uncovering of the "roots" of autism etiology.

  14. Introduction: The Participatory Turn in Urbanism

    Maroš Krivý

    2014-08-01

    Full Text Available This issue of Footprint examines the recent participatory turn in urban planning and urban design. It discusses the co-opting of participatory processes by planning departments, the systematic disregard of inequalities, and the empowering of the market resulting from the ‘anti-statism’ present in many participatory schemes.What is the relationship between the institutionalisation of participation and the practices of autonomy, self-organisation, and inclusion? When and how does genuine empowerment of collectives take place? Does the demand for the empowerment of local organisations and communities strengthen the market forces at the expense of central government?This issue attempts to problematise ‘participation’, to call attentions to some of its shortcomings, deficits, and limitations, not in order to necessarily bypass the demand for the democratisation of the urban, but in order to rectify and strengthen it.

  15. Turning Video Resource Management into Cloud Computing

    Weili Kou

    2016-07-01

    Full Text Available Big data makes cloud computing more and more popular in various fields. Video resources are very useful and important to education, security monitoring, and so on. However, issues of their huge volumes, complex data types, inefficient processing performance, weak security, and long times for loading pose challenges in video resource management. The Hadoop Distributed File System (HDFS is an open-source framework, which can provide cloud-based platforms and presents an opportunity for solving these problems. This paper presents video resource management architecture based on HDFS to provide a uniform framework and a five-layer model for standardizing the current various algorithms and applications. The architecture, basic model, and key algorithms are designed for turning video resources into a cloud computing environment. The design was tested by establishing a simulation system prototype.

  16. The experience turn as ‘bandwagon’

    Fuglsang, Lars; Eide, Dorthe

    2013-01-01

    further central processes, namely appropriation and narrowing the workspace. One Norwegian and one Danish network are studied using a case methodology. They are two rural networks of mainly small tourism firms. The empirical study confirms and illustrates how the bandwagon effect involves these three core......This paper uses the bandwagon metaphor to analyse, in two rural contexts, how small tourism firms become engaged in the idea of the experience economy and how the idea is turned into practice through network formation and innovation. In developing a practice-based approach we use the bandwagon...... metaphor to conceptualize network formation and innovation in terms of a ‘journey’. Following the practice-based literature on bandwagons, the journey starts by labelling an idea that is broad enough to give meaning to, and pull together, a number of diverse supporters. The journey also depends on two...

  17. Turned Back: Mad Men as Intermedial Melodrama

    Monique Rooney

    2012-09-01

    Full Text Available This essay draws on definitions of gesture (Giorgio Agamben and Peter Brooks and catachresis (Peter Brooks, Jacques Derrida to examine the primacy of non-verbal signifiers as communicators of meaning in AMC’s Mad Men. Beginning with an analysis of Mad Men’s credit sequence, it draws attention to Mad Men’s use of gesture and catachresis in relation to melodrama’s privileging of non-verbal and naturalistic expression and its persistence as an intermedial mode that has moved back and forth between various media (theatre, novel, cinema, television and now digital formats. It argues that Mad Men’s melodramatic aesthetic is one that obliquely, and via a gestural and rhetorical ‘turned back’, communicates its relation to the past and the present.

  18. Exact 2-point function in Hermitian matrix model

    Morozov, A.; Shakirov, Sh.

    2009-01-01

    J. Harer and D. Zagier have found a strikingly simple generating function [1,2] for exact (all-genera) 1-point correlators in the Gaussian Hermitian matrix model. In this paper we generalize their result to 2-point correlators, using Toda integrability of the model. Remarkably, this exact 2-point correlation function turns out to be an elementary function - arctangent. Relation to the standard 2-point resolvents is pointed out. Some attempts of generalization to 3-point and higher functions are described.

  19. As the Egg Turns: Monitoring Egg Attendance Behavior in Wild Birds Using Novel Data Logging Technology

    Shaffer, Scott A.; Clatterbuck, Corey A.; Kelsey, Emma C.; Naiman, Alex D.; Young, Lindsay C.; VanderWerf, Eric A.; Warzybok, Pete; Bradley, Russell; Jahncke, Jaime; Bower, Geoff C.

    2014-01-01

    Egg turning is unique to birds and critical for embryonic development in most avian species. Technology that can measure changes in egg orientation and temperature at fine temporal scales (1 Hz) was neither readily available nor small enough to fit into artificial eggs until recently. Here we show the utility of novel miniature data loggers equipped with 3-axis (i.e., triaxial) accelerometers, magnetometers, and a temperature thermistor to study egg turning behavior in free-ranging birds. Artificial eggs containing egg loggers were deployed in the nests of three seabird species for 1–7 days of continuous monitoring. These species (1) turned their eggs more frequently (up to 6.5 turns h−1) than previously reported for other species, but angular changes were often small (1–10° most common), (2) displayed similar mean turning rates (ca. 2 turns h−1) despite major differences in reproductive ecology, and (3) demonstrated distinct diurnal cycling in egg temperatures that varied between 1.4 and 2.4°C. These novel egg loggers revealed high-resolution, three-dimensional egg turning behavior heretofore never measured in wild birds. This new form of biotechnology has broad applicability for addressing fundamental questions in avian breeding ecology, life history, and development, and can be used as a tool to monitor birds that are sensitive to disturbance while breeding. PMID:24887441

  20. Turn! Turn! Turn!: A Time for Engaged Learning. The Engagement of Scholarship and Practice in a Classroom Setting

    Knassmüller, Monika

    2016-01-01

    As the integration of academic teaching and research with communities of practice is considered a major concern of public administration since its founding as a field, professional programmes were established on the premise that there is a positive relationship between practice and scholarship. However, the balance between them is considered…

  1. Turn-by-Turn Imaging of the Transverse Beam Profile in PEP-II

    Fisher, Alan A.; Petree, Mark; /SLAC

    2006-12-18

    During injection or instability, the transverse profile of an individual bunch in a storage ring can change significantly in a few turns. However, most synchrotron-light imaging techniques are not designed for this time scale. We have developed a novel diagnostic that enhances the utility of a fast gated camera by adding, inexpensively, some features of a dual-axis streak camera, in order to watch the turn-by-turn evolution of the transverse profile, in both x and y. The beam's elliptical profile is reshaped using cylindrical lenses to form a tall and narrow ellipse--essentially the projection of the full ellipse onto one transverse axis. We do this projection twice, by splitting the beam into two paths at different heights, and rotating the ellipse by 90{sup o} on one path. A rapidly rotating mirror scans these vertical ''pencils'' of light horizontally across the photocathode of the camera, which is gated for 3 ns on every Nth ring turn. A single readout of the camera captures 100 images, looking like a stroboscopic photograph of a moving object. We have observed the capture of injected charge into a bunch and the rapid change of beam size at the onset of a fast instability.

  2. Assessing lexical, syntactic, and conceptual turn-by-turn alignment in conversations involving conflict and deception

    Duran, Nicholas; Fusaroli, Riccardo; Paxton, Alexandra

    2015-01-01

    -based NLP tools, the procedure begins by taking conversational partners' turns and converting each into a lemmatized sequence of words, assigning part-of-speech tags and computing high-dimensional semantic vectors per each utterance. Words and part-of-speech tags are further sequenced into n-g! rams...

  3. Turning to Ontology in STS? Turning to STS through ‘Ontology’

    van Heur, B.; Leydesdorff, L.; Wyatt, S.

    2012-01-01

    We examine the evidence for the claim of an ‘ontological turn’ in science and technology studies (STS). Despite an increase in references to ‘ontology’ in STS since 1989, we show that there has not so much been an ontological turn as multiple discussions deploying the language of ontology,

  4. Turn me on! Using the “Internet of Things” to turn things on and off

    Butgereit, L

    2011-10-01

    Full Text Available to the Internet. There are many examples of things posting their status on Twitter and allowing uni-directional access. TurnMeOn is an example of allowing bidirectional access between people and things using Internet protocols. Users can query the status of a...

  5. Citizen Action Can Turn Things Around.

    Gardner, John W.

    In this document, the author points out that Americans have lost confidence in the government and political processes and shows how Common Cause can help restore trust in our institutions. Over the years, since the signing of the Constitution, Americans have believed that their political system was one in which they had a voice and that the system…

  6. Mimicry by asx- and ST-turns of the four main types of beta-turn in proteins.

    Duddy, William J; Nissink, J Willem M; Allen, Frank H; Milner-White, E James

    2004-11-01

    Hydrogen-bonded beta-turns in proteins occur in four categories: type I (the most common), type II, type II', and type I'. Asx-turns resemble beta-turns, in that both have an NH. . .OC hydrogen bond forming a ring of 10 atoms. Serine and threonine side chains also commonly form hydrogen-bonded turns, here called ST-turns. Asx-turns and ST-turns can be categorized into four classes, based on side chain rotamers and the conformation of the central turn residue, which are geometrically equivalent to the four types of beta-turns. We propose asx- and ST-turns be named using the type I, II, I', and II' beta-turn nomenclature. Using this, the frequency of occurrence of both asx- and ST-turns is: type II' > type I > type II > type I', whereas for beta-turns it is type I > type II > type I' > type II'. Almost all type II asx-turns occur as a recently described three residue feature named an asx-nest.

  7. Travel Time Model for Right-Turning Vehicles of Secondary Street at Unsignalized Intersections

    Feng Yu-Qin

    2013-01-01

    Full Text Available The travel time of right-turning vehicles on secondary street at unsignalized intersection is discussed in this paper. Under the assumption that the major-street through vehicles’ headway follows Erlang distribution and secondary-street right-turning vehicles’ headway follows Poisson distribution. The right-turning vehicles travel time model is established on the basis of gap theory and M/G/1 queue theory. Comparison is done with the common model based on the assumption that the major-street vehicles’ headway follows Poisson distribution. An intersection is selected to verify each model. The results show that the model established in this paper has stronger applicability, and its most relative error is less than 15%. In addition, the sensitivity analysis has been done. The results show that right-turning flow rate and major-street flow rate have a significant impact on the travel time. Hence, the methodology for travel time of right-turning vehicles at unsignalized intersection proposed in this paper is effective and applicable.

  8. Predicting turns in proteins with a unified model.

    Qi Song

    Full Text Available MOTIVATION: Turns are a critical element of the structure of a protein; turns play a crucial role in loops, folds, and interactions. Current prediction methods are well developed for the prediction of individual turn types, including α-turn, β-turn, and γ-turn, etc. However, for further protein structure and function prediction it is necessary to develop a uniform model that can accurately predict all types of turns simultaneously. RESULTS: In this study, we present a novel approach, TurnP, which offers the ability to investigate all the turns in a protein based on a unified model. The main characteristics of TurnP are: (i using newly exploited features of structural evolution information (secondary structure and shape string of protein based on structure homologies, (ii considering all types of turns in a unified model, and (iii practical capability of accurate prediction of all turns simultaneously for a query. TurnP utilizes predicted secondary structures and predicted shape strings, both of which have greater accuracy, based on innovative technologies which were both developed by our group. Then, sequence and structural evolution features, which are profile of sequence, profile of secondary structures and profile of shape strings are generated by sequence and structure alignment. When TurnP was validated on a non-redundant dataset (4,107 entries by five-fold cross-validation, we achieved an accuracy of 88.8% and a sensitivity of 71.8%, which exceeded the most state-of-the-art predictors of certain type of turn. Newly determined sequences, the EVA and CASP9 datasets were used as independent tests and the results we achieved were outstanding for turn predictions and confirmed the good performance of TurnP for practical applications.

  9. Diseases that turn African hair silky.

    Ajose, Frances O A

    2012-11-01

    African hair in its natural state poses tenacious grooming challenges; consequently a large portion of the African cosmetic industry is focused on means to relax the tight curls of African hair to make the hair more manageable. In malnourished and hypoproteinemic states, African hair straightens in an uncomplimentary manner. Recently, we observed that in certain diseases African hair changes to a desirable silky wavy texture. To identify the diseases that turn African hair silky and their parameters we examined 5612 dermatology patients at a tertiary hospital in Nigeria. We then studied the clinical and basic laboratory parameters of those patients whose diseases were accompanied by the silky hair change. Silky hair change similar to the hair of the African neonatal child was observed in five diseases, namely AIDS, rheumatoid arthritis, systemic lupus erythematosus, pulmonary tuberculosis with cachexia, and Behçet's disease. Our study identified retrogression of African hair to the neonatal structure in five diseases. Anemia of chronic illness, high erythrocyte sedimentation rate, and mild hypocalcemia were significant laboratory parameters. This is an important observation, which should excite and advance research into the nature and structure of African hair. The causes of structural hair changes should include these five diseases. © 2012 The International Society of Dermatology.

  10. Now, It's Your Turn: How You Can Take Medicine Safely

    ... turn Javascript on. Feature: Taking Medicines Safely Now, It's Your Turn: How You Can Take Medicine Safely ... medicine. The pharmacist has filled the prescription. Now it's up to you to take the medicine safely. ...

  11. Relationship between linear velocity and tangential push force while turning to change the direction of the manual wheelchair.

    Hwang, Seonhong; Lin, Yen-Sheng; Hogaboom, Nathan S; Wang, Lin-Hwa; Koontz, Alicia M

    2017-08-28

    Wheelchair propulsion is a major cause of upper limb pain and injuries for manual wheelchair users with spinal cord injuries (SCIs). Few studies have investigated wheelchair turning biomechanics on natural ground surfaces. The purpose of this study was to investigate the relationship between tangential push force and linear velocity of the wheelchair during the turning portions of propulsion. Using an instrumented handrim, velocity and push force data were recorded for 25 subjects while they propel their own wheelchairs on a concrete floor along a figure-eight-shaped course at a maximum velocity. The braking force (1.03 N) of the inside wheel while turning was the largest of all other push forces (p<0.05). Larger changes in squared velocity while turning were significantly correlated with higher propulsive and braking forces used at the pre-turning, turning, and post-turning phases (p<0.05). Subjects with less change of velocity while turning needed less braking force to maneuver themselves successfully and safely around the turns. Considering the magnitude and direction of tangential force applied to the wheel, it seems that there are higher risks of injury and instability for upper limb joints when braking the inside wheel to turn. The results provide insight into wheelchair setup and mobility skills training for wheelchair users.

  12. The Idea of Modernity in Italian Literature at the Turn of the 19th and 20th Centuries

    Anastasia V. Golubtsova

    2016-09-01

    Full Text Available The article analyzes various concepts of modernity in Italian literature at the turn of the 19th and 20th centuries. Modernity is considered a key category of the literary process of the period: different views of modernity reveal philosophical, historical, and aesthetic ideas of the major authors and literary currents. The term modernity in its relation to Italy at the turn of the 19th and 20th centuries may be understood in two different ways: as a specific time period after the unification of Italy and as an aesthetic ideal, both reachable and unreachable. Modernity as a historical period is inseparable from the sense of disappointment and awareness of Italian backwardness and provincialism. The Scapigliati manifest their socio-critical position as a Romantic conflict between individual and society, Verism represents the same idea as a tragic clash of traditional peasant world and modernity that is destroying it. Luigi Pirandello belongs to the same socio-critical tradition. The sense of weariness and decadence is one of the aspects of modern worldview: Gabriele D’Annunzio expresses it in the form of decadent aestheticism; the Crepusculars reject modernity and replace it with the idea of everyday life; Luigi Pirandello puts a special emphasis on the state of perplexity and confusion experienced by a modern man. From the aesthetic point of view, modernity in Italy begins as a struggle against Romanticism; however, here we encounter the controversial nature of the concept again. Giosue Carducci and the Scapigliati reject Italian Romanticism but turn to European Romanticism trying to overcome Italian cultural backwardness. A Verist writer Luigi Capuana elaborates a positivist ideal of modern literature and yet abandons it later. D’Annunzio sees the ideal of modern art in restoring cultural continuity. Futurists, on the contrary, understand modernity as breaking with tradition. Thus, all aesthetic interpretations of modernity in Italy focus

  13. First turn simulations in the cooler synchrotron COSY

    Dinev, D.

    1991-07-01

    This paper is devoted to the first turn correction and related problems in particle accelerators of synchrotron type. The paper consists of two parts. The first part is a survey of the existing methods for first turn steering. The second part is entirely devoted to the first turn in the cooler synchrotron COSY which is under assembling in KFA-Julich, Germany. (orig.)

  14. Liquid in the major incision

    Herrera Jaramillo, Diego Alberto; Ortega Jaramillo, Hector

    2003-01-01

    We present the case of a patient with spill pleural extending in the left major incision. In the chest thorax PA, we could observe one of the complex radiographic appearances that take the reconfiguration of fluid in this localization, being this appearance dependent of the patient's position. Some points are also discussed on the anatomy of the major incisions and some of their radiographic characteristics

  15. Critical points in magnetic systems

    Bongaarts, A.L.M.

    1975-01-01

    The magnetical phase transitions of CsCoCl 3 .2H 2 O and CsCoCl 3 .2D 2 O are investigated by neutron diffraction techniques with special attention to the critical points in the phase diagrams. CsCoCl 3 .2H 2 O turned out to be a one-dimentional magnetic antiferromagnet with ferromagnetic and antiferromagnetic interactions. In the vicinity of the Neel point, the critical behavior in zero magnetic field could be described as a three-dimentional long range ordering, while the fluctuations in the system are one-dimensional. In the presence of a magnetic field, the behavior of the system in the critical region of the magnetic phase diagram between the Neel temperature at zero field (3.3degK) and 1.85degK, was in good agreement with the theory. Below 1.85degK, the phase transition in a magnetic field changes into a line of triple points whose end point could be identified as a tricritical point, i.e., an intersection of three critical lines. The parameters derived from observations in the neighborhood of this tricritical point obey the scaling laws but are not in numerical agreement with theoretical predictions

  16. Effect of continuous versus intermittent turning on nursing and non-nursing care time for acute spinal cord injuries.

    Bugaresti, J M; Tator, C H; Szalai, J P

    1991-06-01

    The present study was conducted to determine whether automated, continuous turning beds would reduce the nursing care time for spinal cord injured (SCI) patients by freeing hospital staff from manual turning of patients every 2 hours. Seventeen patients were randomly assigned to continuous or intermittent turning and were observed during the 8 hour shift for 1 to 18 days following injury. Trained observers recorded the time taken for patient contact activities performed by the nursing staff (direct nursing care) and other hospital staff. The mean direct nursing care time per dayshift per patient was 130 +/- 22 (mean +/- SD) minutes for 9 patients managed with continuous turning and 115 +/- 41 (mean +/- SD) minutes for 8 patients managed with intermittent turning. The observed difference in care time between the two treatment groups was not significant (p greater than 0.05). Numerous factors including neurological level, time following injury, and medical complications appeared to affect the direct nursing care time. Although continuous turning did not reduce nursing care time it offered major advantages for the treatment of selected cases of acute SCI. Some major advantages of continuous turning treatment were observed. Spinal alignment was easier to maintain during continuous turning in patients with injuries of the cervical spine. Continuous turning allowed radiological procedures on the spine, chest and abdomen to be more easily performed without having to alter the patients' position in bed. Therapy and nursing staff indicated that the continuous turning bed facilitated patient positioning for such activities as chest physiotherapy. With continuous turning, one nurse was sufficient to provide care for an individual SCI patient without having to rely on the assistance of other nurses on the ward for patient turning every 2 hours.

  17. Tomographic reconstruction of transverse phase space from turn-by-turn profile data

    Hancock, S; Lindroos, M

    1999-01-01

    Tomographic methods have the potential for useful application in beam diagnostics. The tomographic reconstruction of transverse phase space density from turn-by-turn profile data has been studied with particular attention to the effects of dispersion and chromaticity. It is shown that the modified Algebraic Reconstruction Technique (ART) that deals successfully with the problem of non-linear motion in the longitudinal plane cannot, in general, be extended to cover the transverse case. Instead, an approach is proposed in which the effect of dispersion is deconvoluted from the measured profiles before the phase space picture is reconstructed using either the modified ART algorithm or the inverse Radon Transform. This requires an accurate knowledge of the momentum distribution of the beam and the modified ART reconstruction of longitudinal phase space density yields just such information. The method has been tested extensively with simulated data.

  18. Model-independent analysis of the Fermilab Tevatron turn-by-turn beam position monitor measurements

    Petrenko, A. V.; Valishev, A. A.; Lebedev, V. A.

    2011-09-01

    Coherent transverse beam oscillations in the Tevatron were analyzed with the model-independent analysis (MIA) technique. This allowed one to obtain the model-independent values of coupled betatron amplitudes, phase advances, and dispersion function around the ring from a single dipole kick measurement. In order to solve the MIA mode mixing problem which limits the accuracy of determination of the optical functions, we have developed a new technique of rotational MIA mode untangling. The basic idea is to treat each beam position monitor (BPM) as two BPMs separated in a ring by exactly one turn. This leads to a simple criterion of MIA mode separation: the betatron phase advance between any BPM and its counterpart shifted by one turn should be equal to the betatron tune and therefore should not depend on the BPM position in the ring. Furthermore, we describe a MIA-based technique to locate vibrating magnets in a storage ring.

  19. Model-independent analysis of the Fermilab Tevatron turn-by-turn beam position monitor measurements

    A. V. Petrenko

    2011-09-01

    Full Text Available Coherent transverse beam oscillations in the Tevatron were analyzed with the model-independent analysis (MIA technique. This allowed one to obtain the model-independent values of coupled betatron amplitudes, phase advances, and dispersion function around the ring from a single dipole kick measurement. In order to solve the MIA mode mixing problem which limits the accuracy of determination of the optical functions, we have developed a new technique of rotational MIA mode untangling. The basic idea is to treat each beam position monitor (BPM as two BPMs separated in a ring by exactly one turn. This leads to a simple criterion of MIA mode separation: the betatron phase advance between any BPM and its counterpart shifted by one turn should be equal to the betatron tune and therefore should not depend on the BPM position in the ring. Furthermore, we describe a MIA-based technique to locate vibrating magnets in a storage ring.

  20. Brief: Turning data into information -- case history

    Moore, G.C.

    1994-01-01

    In Feb. 1993, Bow Valley energy (BVE) shut down its mainframe and replaced all applications that ran on it with purchased packages. This massive project, which affected almost every area in the firm, was conceived and completed in less than 1 year and moved BVE from being a laggard to an innovator in the use of information technology (IT). The project was the result of recognizing that a major key to enhancing productivity was harnessing the value in information. This paper briefly describes the project's beginnings, major activities, and results. The project has been the subject of numerous publications, and its benefits resulted in BVE's receiving the Canadian Productivity Award, a national prize recognizing leadership in IT

  1. Breaking New Ground with High Resolution Turn-By-Turn BPMs at the ESRF

    Farvacque, L; Scheidt, K

    2001-01-01

    This High-Resolution, Turn-by-Turn BPM system is a low-cost extension to the existing BPM system, based on the RF-multiplexing concept, used for slow Closed-Orbit measurements. With this extension Beam Position measurements in both planes, at all (224) BPMs in the 844 m ESRF Storage Ring, for up to 2048 Orbit Turns with 1 μm resolution are performed. The data acquisition is synchronised to a single, flat 1 μs, transverse deflection kick to the 1μs beamfill in the 2.8μs revolution period. The high quality of this synchronisation, together with the good reproducibility of the deflection kick and the overall stability of the Closed Orbit beam allows to repeat the kick and acquisition in many cycles. The subsequent averaging of the data obtained in these cycles yields the 1um resolution. The latter allows lattice measurements with high precision such as the localisation of very small focussing errors and modulation in Beta values and phase advances. It also finds an unique ...

  2. Turn-Based War Chess Model and Its Search Algorithm per Turn

    Hai Nan

    2016-01-01

    Full Text Available War chess gaming has so far received insufficient attention but is a significant component of turn-based strategy games (TBS and is studied in this paper. First, a common game model is proposed through various existing war chess types. Based on the model, we propose a theory frame involving combinational optimization on the one hand and game tree search on the other hand. We also discuss a key problem, namely, that the number of the branching factors of each turn in the game tree is huge. Then, we propose two algorithms for searching in one turn to solve the problem: (1 enumeration by order; (2 enumeration by recursion. The main difference between these two is the permutation method used: the former uses the dictionary sequence method, while the latter uses the recursive permutation method. Finally, we prove that both of these algorithms are optimal, and we analyze the difference between their efficiencies. An important factor is the total time taken for the unit to expand until it achieves its reachable position. The factor, which is the total number of expansions that each unit makes in its reachable position, is set. The conclusion proposed is in terms of this factor: Enumeration by recursion is better than enumeration by order in all situations.

  3. Turning energy around: an interactive exhibition experience

    Sarah Kellberg; Christina Newinger

    2018-01-01

    A transition from the fossil-fuel driven to a sustainable energy system is an enormous global challenge: climate change and finite resources require countries all over the world to change their way of producing, transporting and using energy. The Energiewende (energy transition) will require major changes in the current energy supply system in Germany – but also worldwide. These changes will not only affect the technical sector but will also include ecological questions, social issues and pol...

  4. The "Cultural Turn" in the Classroom: Two Examples of Pedagogy and the Politics of Representation

    Smith, Laurel

    2002-01-01

    This article offers video lessons that interweave visual and written materials in order to introduce university undergraduates (who may or may not be geography majors) to some recent shifts in geographic inquiry. What is often described as the "cultural turn" in human geography invites us to examine more closely the politics of representation,…

  5. and γγ-turns in proteins revisited: A new set of amino acid turn-type de

    cent Protein Data Bank has nearly doubled and the number of γ-turns in a representative set of 320 proteins has in- creased over seven times since the previous analysis. β-turns (7153) and γ-turns (911) extracted from these proteins were used to derive a revised set of type-dependent amino acid positional preferences and ...

  6. and γγ-turns in proteins revisited: A new set of amino acid turn-type de

    mine, valine, glutamic acid and alanine has decreased for β-turns. Certain new amino acid preferences were observed for both turn types and individual amino acids showed turn-type dependent positional preferences. The rationale for new amino acid preferences are discussed in the light of hydrogen bonds and other.

  7. Some genus 3 curves with many points

    Auer, R; Top, J; Fieker, C; Kohel, DR

    2002-01-01

    We explain a naive approach towards the problem of finding genus 3 curves C over any given finite field F-q of odd characteristic, with a number of rational points close to the Hasse-Weil-Serre upper bound q+1+3[2rootq]. The method turns out to be successful at least in characteristic 3.

  8. Wittgenstein and the linguistic turn in social theory

    Hermansen, Jens Christian

    of Winch in social theory, the wider and more recent influence of Wittgenstein in areas such as technology and science studies, social theory, feminist and gender studies and conversation and discourse analysis is also considered. Historically, the readings of Wittgenstein in the social sciences have taken...... of the linguistic turn in social theory, the linguistic turn is a double-edged sword of both profound insights and limits; the claim is that the limits of the linguistic turn are the strengths of functionalist, structuralist and materialist approaches to the social sciences. The approach of the critical turn...... is to develop a more comprehensive social theory that is sensitive to these strengths and thus supersedes the limits of the linguistic turn. This paper suggests a different approach. Against the critical turn, the paper argues that the limits of the linguistic turn are identical with the very assumptions...

  9. Turning your back to the border

    Bennike, Rune Bolding

    2018-01-01

    authority of a Limbuwan state in the context of a major national transition. The movement, I argue, describes a balancing act of political mobilisation between an indigeneity-oriented politics of culture and a state-oriented and state-emulating culture of politics.These two dimensions operate at different...... scales. While the former connects the movement to pre-national histories and global narratives of ethnic belonging, the latter ties the movement thoroughly back into the territorialised politics of the Nepali nation state. Counterintuitively, the political practice of this movement for local autonomy...

  10. Social conformity and propagation of information in collective U-turns of fish schools.

    Lecheval, Valentin; Jiang, Li; Tichit, Pierre; Sire, Clément; Hemelrijk, Charlotte K; Theraulaz, Guy

    2018-04-25

    Moving animal groups such as schools of fishes or flocks of birds often undergo sudden collective changes of their travelling direction as a consequence of stochastic fluctuations in heading of the individuals. However, the mechanisms by which these behavioural fluctuations arise at the individual level and propagate within a group are still unclear. In this study, we combine an experimental and theoretical approach to investigate spontaneous collective U-turns in groups of rummy-nose tetra ( Hemigrammus rhodostomus ) swimming in a ring-shaped tank. U-turns imply that fish switch their heading between the clockwise and anticlockwise direction. We reconstruct trajectories of individuals moving alone and in groups of different sizes. We show that the group decreases its swimming speed before a collective U-turn. This is in agreement with previous theoretical predictions showing that speed decrease facilitates an amplification of fluctuations in heading in the group, which can trigger U-turns. These collective U-turns are mostly initiated by individuals at the front of the group. Once an individual has initiated a U-turn, the new direction propagates through the group from front to back without amplification or dampening, resembling the dynamics of falling dominoes. The mean time between collective U-turns sharply increases as the size of the group increases. We develop an Ising spin model integrating anisotropic and asymmetrical interactions between fish and their tendency to follow the majority of their neighbours nonlinearly (social conformity). The model quantitatively reproduces key features of the dynamics and the frequency of collective U-turns observed in experiments. © 2018 The Author(s).

  11. ISOLDE at the turn of the millennium

    CERN. Geneva

    2014-01-01

    At the transition to the twenty first century ISOLDE was undergoing a major upgrade from a very successful low-energy radioactive ion beam facility towards a new era of nuclear structure studies employing accelerated radioactive beams [1]. The first accelerated beam was obtained in November 2001 when REX-ISOLDE produced a 2.2 MeV/u beam of 26Na ions. Additionally, the ISOLDE complex was made particularly attractive facility due to other break-through developments in the fields of laser ion sources and ion traps. Some highlights from the years 1999 to 2002 during my time as a group leader will be presented. 1. Juha Äystö, CERN’s longest serving experimental facility, in Physics Reports 403 (2004) 459

  12. Searching for Criteria in Evaluating the Monofin Swimming Turn from the Perspective of Coaching and Improving Technique

    Rejman, Marek; Borowska, Grażyna

    2008-01-01

    and glide time. Key pointsShort time and large surface of the monofin additionally hinders complexity of the turn performance by disturbance in sensing and controlling body in water. Availability of no objective data on monofin swimming turns resulted in research in the field connected with specifying parameters needed for the technique evaluation.Correct turn technique may help to improve swimming race results.The diagram constructed on the basis of the interdependency of the total turn time and the remaining recorded kinematic parameters should establish the areas of searching for mechanism of effective and efficient monofin swimming turn.The most crucial, from the coaching and improving point of view, seem to be activities which take place from the moment of feet wall contact till the first propulsive movements. Therefore, the high quality of the monofin swimming turn technique is not just a simple consequence of the fastest performance of all its component parts.The most important criteria of the quality in the monofin swimming turn technique are: striving for extending in the optimum scope of wall contact time, the time of the push-off phase and the glide time. PMID:24150136

  13. Swine manure composting by means of experimental turning equipment.

    Chiumenti, A; Da Borso, F; Rodar, T; Chiumenti, R

    2007-01-01

    The purpose of research was to test the effectiveness of a prototype of a turning machine and to evaluate the feasability of a farm-scale composting process of the solid fraction of swine manure. A qualitative evaluation of the process and final product was made by monitoring the following parameters: process temperature, oxygen concentration inside the biomass, gaseous emissions (CH4, CO2, NH3, N2O), respiration index, humification index, total and volatile solids, carbon and nitrogen, pH and microbial load. The prototype proved to be very effective from a technical-operational point of view. The composting process exhibited a typical time-history, characterised by a thermophilic phase followed by a curing phase [Chiumenti, A., Chiumenti, R., Diaz, L.F., Savage, G.M., Eggerth, L.L., Goldstein, N., 2005. Modern Composting Technologies. BioCycle-JG Press, Emmaus, PA, USA]. Gas emissions from compost the windrow were more intense during the active phase of the process and showed a decreasing trend from the thermophilic to the curing phase. The final compost was characterized by good qualitative characteristics, a significant level of humification [Rossi, L., Piccinini, S., 1999. La qualità agronomica dei compost derivanti da liquami suinicoli. (Agronomic quality of swine manure compost). L'informatore Agrario 38, 29-31] and no odor emissions. This method of managing manure represents an effective, low cost approach that could be an interesting opportunity for swine farms.

  14. AE Monitoring of Diamond Turned Rapidly Soldified Aluminium 443

    Onwuka, G; Abou-El-Hossein, K; Mkoko, Z

    2017-01-01

    The fast replacement of conventional aluminium with rapidly solidified aluminium alloys has become a noticeable trend in the current manufacturing industries involved in the production of optics and optical molding inserts. This is as a result of the improved performance and durability of rapidly solidified aluminium alloys when compared to conventional aluminium. Melt spinning process is vital for manufacturing rapidly solidified aluminium alloys like RSA 905, RSA 6061 and RSA 443 which are common in the industries today. RSA 443 is a newly developed alloy with few research findings and huge research potential. There is no available literature focused on monitoring the machining of RSA 443 alloys. In this research, Acoustic Emission sensing technique was applied to monitor the single point diamond turning of RSA 443 on an ultrahigh precision lathe machine. The machining process was carried out after careful selection of feed, speed and depths of cut. The monitoring process was achieved with a high sampling data acquisition system using different tools while concurrent measurement of the surface roughness and tool wear were initiated after covering a total feed distance of 13km. An increasing trend of raw AE spikes and peak to peak signal were observed with an increase in the surface roughness and tool wear values. Hence, acoustic emission sensing technique proves to be an effective monitoring method for the machining of RSA 443 alloy. (paper)

  15. Software engineering turning theory into practice

    Jones, Robert

    1996-01-01

    The term 'Software Engineering' was coined in the mid 1960s, it is said, as a challenge to the software community to start rationalising the software production process. Software engineering is a very young discipline and this challenge still eludes LHC demands software production on a scale far beyond that previously addressed in HEP and we are relying on software engineering to allow a significant number of people address this problem collectively. This series of lectures presents the basics of software engineering from the developer's point of view. The aim is to show how individual developers can improve the quality of the software they produce while avoiding the conflict between the creative process of designing software and the organisational needs of large projects.The Laser Interferometer Gravitanional Wave Observatory (LIGO) is being constructed with a goal to detect these waves and then to use them as a new tool to explore and study The sources of gravitanional waves and techniques for detection wil...

  16. Transparent lattice characterization with gated turn-by-turn data of diagnostic bunch train

    Li, Yongjun; Cheng, Weixing; Ha, Kiman; Rainer, Robert

    2017-11-01

    Methods of characterization of a storage ring's lattice have traditionally been intrusive to routine operations. More importantly, the lattice seen by particles can drift with the beam current due to collective effects. To circumvent this, we have developed a novel approach for dynamically characterizing a storage ring's lattice that is transparent to operations. Our approach adopts a dedicated filling pattern which has a short, separate diagnostic bunch train (DBT). Through the use of a bunch-by-bunch feedback system, the DBT can be selectively excited on demand. Gated functionality of a beam position monitor system is capable of collecting turn-by-turn data of the DBT, from which the lattice can then be characterized after excitation. As the DBT comprises only about one percent of the total operational bunches, the effects of its excitation are negligible to users. This approach allows us to localize the distributed quadrupolar wakefields generated in the storage ring vacuum chamber during beam accumulation. While effectively transparent to operations, our approach enables us to dynamically control the beta beat and phase beat, and unobtrusively optimize performance of the National Synchrotron Light Source-II accelerator during routine operations.

  17. Calorimetry end-point predictions

    Fox, M.A.

    1981-01-01

    This paper describes a portion of the work presently in progress at Rocky Flats in the field of calorimetry. In particular, calorimetry end-point predictions are outlined. The problems associated with end-point predictions and the progress made in overcoming these obstacles are discussed. The two major problems, noise and an accurate description of the heat function, are dealt with to obtain the most accurate results. Data are taken from an actual calorimeter and are processed by means of three different noise reduction techniques. The processed data are then utilized by one to four algorithms, depending on the accuracy desired to determined the end-point

  18. Prediction of beta-turns with learning machines.

    Cai, Yu-Dong; Liu, Xiao-Jun; Li, Yi-Xue; Xu, Xue-biao; Chou, Kuo-Chen

    2003-05-01

    The support vector machine approach was introduced to predict the beta-turns in proteins. The overall self-consistency rate by the re-substitution test for the training or learning dataset reached 100%. Both the training dataset and independent testing dataset were taken from Chou [J. Pept. Res. 49 (1997) 120]. The success prediction rates by the jackknife test for the beta-turn subset of 455 tetrapeptides and non-beta-turn subset of 3807 tetrapeptides in the training dataset were 58.1 and 98.4%, respectively. The success rates with the independent dataset test for the beta-turn subset of 110 tetrapeptides and non-beta-turn subset of 30,231 tetrapeptides were 69.1 and 97.3%, respectively. The results obtained from this study support the conclusion that the residue-coupled effect along a tetrapeptide is important for the formation of a beta-turn.

  19. Turning energy around: an interactive exhibition experience

    Sarah Kellberg

    2018-05-01

    Full Text Available A transition from the fossil-fuel driven to a sustainable energy system is an enormous global challenge: climate change and finite resources require countries all over the world to change their way of producing, transporting and using energy. The Energiewende (energy transition will require major changes in the current energy supply system in Germany – but also worldwide. These changes will not only affect the technical sector but will also include ecological questions, social issues and political matters. Whether any transition is going to favour large scale solutions or decentralised technologies depends on local situations and global interconnections, and above all on a democratic process. Hence energy transition succeeds or fails with the acceptance and participation of society. To deal with this overwhelmingly complex topic and its multi-layered dependencies, the Deutsches Museum has designed an exhibition providing visitors with background knowledge about the necessities and challenges of energy transition, unpicking the links between the different technical, economic and social challenges. The exhibition accomplishes the task with an engaging and facilitating approach while taking into account the highly emotive aspects of energy transition as a societal issue. This paper presents the concept of the travelling exhibition energie.wenden, relating it to the Deutsches Museum´s tradition of exhibitions as well as to the challenge of how to deal with socio-scientific topics in scientific exhibitions.

  20. Turning the tide of corneal blindness

    Matthew S Oliva

    2012-01-01

    Full Text Available Corneal diseases represent the second leading cause of blindness in most developing world countries. Worldwide, major investments in public health infrastructure and primary eye care services have built a strong foundation for preventing future corneal blindness. However, there are an estimated 4.9 million bilaterally corneal blind persons worldwide who could potentially have their sight restored through corneal transplantation. Traditionally, barriers to increased corneal transplantation have been daunting, with limited tissue availability and lack of trained corneal surgeons making widespread keratoplasty services cost prohibitive and logistically unfeasible. The ascendancy of cataract surgical rates and more robust eye care infrastructure of several Asian and African countries now provide a solid base from which to dramatically expand corneal transplantation rates. India emerges as a clear global priority as it has the world′s largest corneal blind population and strong infrastructural readiness to rapidly scale its keratoplasty numbers. Technological modernization of the eye bank infrastructure must follow suit. Two key factors are the development of professional eye bank managers and the establishment of Hospital Cornea Recovery Programs. Recent adaptation of these modern eye banking models in India have led to corresponding high growth rates in the procurement of transplantable tissues, improved utilization rates, operating efficiency realization, and increased financial sustainability. The widespread adaptation of lamellar keratoplasty techniques also holds promise to improve corneal transplant success rates. The global ophthalmic community is now poised to scale up widespread access to corneal transplantation to meet the needs of the millions who are currently blind.

  1. Anticipation in turn-taking: mechanisms and information sources.

    Riest, Carina; Jorschick, Annett B; de Ruiter, Jan P

    2015-01-01

    During conversations participants alternate smoothly between speaker and hearer roles with only brief pauses and overlaps. There are two competing types of accounts about how conversationalists accomplish this: (a) the signaling approach and (b) the anticipatory ('projection') approach. We wanted to investigate, first, the relative merits of these two accounts, and second, the relative contribution of semantic and syntactic information to the timing of next turn initiation. We performed three button-press experiments using turn fragments taken from natural conversations to address the following questions: (a) Is turn-taking predominantly based on anticipation or on reaction, and (b) what is the relative contribution of semantic and syntactic information to accurate turn-taking. In our first experiment we gradually manipulated the information available for anticipation of the turn end (providing information about the turn end in advance to completely removing linguistic information). The results of our first experiment show that the distribution of the participants' estimation of turn-endings for natural turns is very similar to the distribution for pure anticipation. We conclude that listeners are indeed able to anticipate a turn-end and that this strategy is predominantly used in turn-taking. In Experiment 2 we collected purely reacted responses. We used the distributions from Experiments 1 and 2 together to estimate a new dependent variable called Reaction Anticipation Proportion. We used this variable in our third experiment where we manipulated the presence vs. absence of semantic and syntactic information by low-pass filtering open-class and closed class words in the turn. The results suggest that for turn-end anticipation, both semantic and syntactic information are needed, but that the semantic information is a more important anticipation cue than syntactic information.

  2. [Study of beta-turns in globular proteins].

    Amirova, S R; Milchevskiĭ, Iu V; Filatov, I V; Esipova, N G; Tumanian, V G

    2005-01-01

    The formation of beta-turns in globular proteins has been studied by the method of molecular mechanics. Statistical method of discriminant analysis was applied to calculate energy components and sequences of oligopeptide segments, and after this prediction of I type beta-turns has been drawn. The accuracy of true positive prediction is 65%. Components of conformational energy considerably affecting beta-turn formation were delineated. There are torsional energy, energy of hydrogen bonds, and van der Waals energy.

  3. Laterality of the lower limbs and carving turns

    F Vaverka

    2010-06-01

    Full Text Available The aim of this study is to discover whether the lateral preference of the lower limbs influences the execution of successive carving turns or not. Six skilled skiers (men, right lower limb preference, age 26.5±1.61 years old, height 1.80±0.04 m, body weight 78.83±5.46 kg executed 30 (18 left, 12 right symmetrical carving turns. Kinetic analysis of the final vertical component of reaction force FZ(t measured dynamometrically provided the information about the time of initiation and steering phases of the turn and the maximum force, average force and force impulse. Differences between right and left turns are not statistically significant. Factual analyses of the magnitude of measured variables confirmed that left turns were found to have a longer duration, a shorter initiation and longer steering phase, and higher level of produced force and force impulse in comparison with right turns. Based on the results it can be concluded that the turns where the outer leg is the preferred limb are preferentially used to regulate the speed of the ride. The study of laterality in symmetrical carving turns has proven that lateral preference of lower extremities influences the execution of the turn also by expert skiers.

  4. The Effect of a Textured Insole on Symmetry of Turning

    Etem Curuk

    2018-01-01

    Full Text Available Turning while walking is a common daily activity. Individuals with unilateral impairment frequently perform turns asymmetrically. The purpose of the study was to investigate the effect of a discomfort-inducing textured insole on symmetry of turning. Nine healthy individuals performed turns to the right while walking with no insole, immediately after the insole was inserted in the right shoe, and after walking for six minutes with the insole. The duration of turning, displacements of pelvic markers, and perceived level of discomfort were evaluated. Utilizing the insole was associated with the increased level of perceived discomfort (p<0.05. Moreover, using the insole was linked to changes in the displacement of two pelvic markers and larger asymmetry index while turning immediately after the insole was inserted in the right shoe as compared to no insole condition (p<0.05. The duration of right turning increased immediately after the insole was inserted (p<0.05 and after walking with the insole for six minutes. The results indicate that the textured insole creates asymmetry of turning in healthy individuals. The outcome provides a background for future studies focused on using a textured insole to minimize the asymmetry of turning commonly seen in individuals with unilateral impairment.

  5. Diamond-turning HP-21 beryllium to achieve an optical surface

    Allen, D.K.; Hauschildt, H.W.; Bryan, J.B.

    1975-01-01

    Investigation of diamond turning on beryllium was made in anticipation of obtaining an optical finish. Although results of past experiences were poor, it was decided to continue diamond turning on beryllium beyond initial failures. By changing speed and using coolant, partial success was achieved. Tool wear was the major problem. Tests were made to establish and plot wear as a function of cutting speed and time. Slower speeds did cause lower wear rates, but at no time did wear reach an acceptable level. The machine, tools, and procedure used were chosen based on the results of preliminary attempts and on previous experience. It was unnecessary to use an air-bearing spindle because tool failure governed the best finish that could be expected. All tools of diamond composition, whether single crystal or polycrystalline, wore at unacceptable rates. Based on present technology, it must be concluded that beryllium cannot be feasibly diamond turned to achieve an optical finish. (22 fig.)

  6. Turn public problems to private account.

    Rockefeller, Rodman C

    2003-08-01

    Many managers face increasing calls to invest corporate resources in charitable causes. How should executives balance a firm's very real economic imperative to maximize profitability with its hypothetical moral imperative to improve society? To provide one answer, the author draws on his experience as president of an economic-development company, IBEC. Viewing profit as "an essential discipline and measure of economic success" but not "the sole corporate goal," the company actively invested in social programs that met four criteria: they served a need of the local population; they required innovative approaches; they made sense on economic grounds; and they respected the social norms of the community. Such civic-minded efforts, the author argues in this prescient 1971 article, not only improve people's lives but also create the foundation for more affluent and dynamic markets--markets that ultimately produce greater profits for business. For example, one of IBEC's earliest ventures was directed toward solving Venezuela's problems in retail food marketing. Many important items were unavailable at the small stores where people shopped. So in 1949, working with local partners, IBEC opened a supermarket. Supermarkets soon changed the food-buying habits of the nation, and the initiative helped alter patterns of food distribution and created the reliable demand needed to establish a host of local suppliers. Return on IBEC's investment, and that of its local partners, was most satisfactory, the author reports. The road to meeting a public need-especially a major one--is rarely easy, the author says. But if management sizes up the need well, there is a good chance its new venture will survive under adversity.

  7. Healthcare performance turned into decision support.

    Sørup, Christian Michel; Jacobsen, Peter

    2013-01-01

    The purpose of this study is to first create an overview of relevant factors directly influencing employee absence in the healthcare sector. The overview is used to further investigate the factors identified using employee satisfaction survey scores exclusively. The result of the overall objective is a management framework that allows managers to gain insight into the current status of risk factors with high influence on employee absence levels. The research consists of a quantitative literature study supported by formal and semi-formal interviews conducted at the case organisations. Employee satisfaction surveys were applied to analyse the development over time of selected factors correlated with concurrent employee absence rates. Checking for causal results, comparisons with the included published literature findings were also carried out. Four major clustered factors, three of which constitute the term "social capital", showed a high degree of connection with employee absence rates. The factors are general satisfaction, fairness, reliance and co-operation. Integrating the four elements in a management framework will provide valuable and holistic information about the determinants with regard to current levels of employee absence. The framework will be a valuable support for leaders with the authority to alter the determinants of employee absence. Since a great part of the empirical material is supplied from the healthcare sector, the results obtained could be restricted to this sector. Inclusion of data from Arbejdsmarkedets Tillaegspension (ATP) showed no deviation from the results in the healthcare sector. The product of the study is a decision support tool for leaders to cope with levels of employee absence. The framework is holistic and can prove to be a valuable tool to take a bearing of where to focus future initiatives. Gathering former observational studies in a complete overview embracing many relevant factors that influence sickness absence has not yet

  8. The Nogay Horde in the System of International Relations at the turn of the 15th–16th centuries »

    M.V. Moiseev

    2016-07-01

    Full Text Available The article is devoted to the study of foreign policy of the Nogai Horde as well as to its attempts to join the system of international relations of the Western Desht. The author identified the main geopolitical interests of the Manghyt Yurt. Struggle against the Great Horde was a significant factor in the formation of international relations of the Western Desht. It turned out to be the most important factor that both cemented political alliances in the region and ensured their viability. However, we should point out the possibility of coalition configurations’ changing, bearing in mind that the interests of the Nogai Horde, that is of a new player, were not always taken into account. In 1493, such an attempt was undertaken by Mirza Musa, but since he had encountered resistance, this attempt was unsuccessful. Reliance on the Siberian Yurt played a much larger role for the Nogai claims. Using the Siberian Chinggisids, the Nogais managed to legitimize their claims to the Kazan khanate. Particularly successful were the events in 1496. However, these events had shown the lack of resources of the Nogai Horde to fight with the Russian government and eventually led to the restriction of the Nogai policy interests by the marriage diplomacy. The Nogai-Crimean confrontation and struggle for control over the Volga crossings determined the nature of international relations in the Western Desht and became a major geopolitical factor in the region after the defeat of the Great Horde. However, for the turn of the 15th–16th centuries the Crimean-Nogai confrontation had not yet become irreversible. In this struggle a new challenge faced the Nogais: they had to take hold of the Volga transports and Haji-Tarkhan for effective control over the right bank of the Volga. This logic of events would lead to a new great war in the Western Desht, in which the Nogai Horde was to play a leading role. However the Kazakh invasion dramatically altered the balance of power

  9. Turn-taking cue delays in human-robot communication

    Cuijpers, R. H.; Van Den Goor, V. J.P.

    2017-01-01

    Fluent communication between a human and a robot relies on the use of effective turn-taking cues. In human speech staying silent after a sequence of utterances is usually accompanied by an explicit turnyielding cue to signal the end of a turn. Here we study the effect of the timing of four

  10. Synthesis of conformationally restricted beta-turn mimics

    IJsselstijn, M.

    2006-01-01

    This thesis aims at developing methods for introducing conformational restriction in Beta-turns, the turn elements present in Beta-sheets. A conformationally restricted peptide might either be formed via incorporation of a bridging diamino acids in a growing peptide chain, or via covalent bond

  11. A Cognitive Analysis of Truck Drivers’ Right-hand Turns

    Sieker, Tobias Grønborg; G. Skulason, Thorgeir; Sletting, Kristian

    2015-01-01

    This paper presents an investigation of truck drivers’ performance during right-hand turns performed in intersections with traffic lights in order to elicit the truck drivers’ domain, decision-making processes, and the strategies used while executing the turn. To gain knowledge about this, a truc...

  12. Fast Turn-off Mine Transient Electromagnetic Transmitter System

    ZHENG Xiao-Liang

    2014-05-01

    Full Text Available For solving problems such as short turn-off time, high linear degree of falling edge, measurement of turn-off time and influence of primary signals for transient electromagnetic transmitter, and restrictions because of the environmental conditions of underground coal mine, this thesis aims at designing a new transient electromagnetic transmitter system suitable for coal mine. Supported by damping absorption circuit, such system applies small volume, sectional transmitting coil, with features of short turn-off time, high linear degree of current falling edge. It uses the transmitter monitoring circuit, which accurately measures turn-off time and simultaneously records the current value changes after turn-off, thus to eliminate the influence of primary field as well as to restore earlier secondary field signals for reference and finally to improve the ability to detect the shallow structure. It turns out that the new system has a shorter turn-off time, a higher linear degree of current falling and more accurate data record of turn-off current.

  13. Cutting forces during turning with variable depth of cut

    M. Sadílek

    2016-03-01

    The proposed research for the paper is an experimental work – measuring cutting forces and monitoring of the tool wear on the cutting edge. It compares the turning where standard roughing cycle is used and the turning where the proposed roughing cycle with variable depth of cut is applied.

  14. Density of Plutonium Turnings Generated from Machining Activities

    Gonzales, John Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Vigil, Duane M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jachimowski, Thomas A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Archuleta, Alonso [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Arellano, Gerald Joseph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Melton, Vince Lee [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-10-20

    The purpose of this project was to determine the density of plutonium (Pu) turnings generated from the range of machining activities, using both surrogate material and machined Pu turnings. Verify that 500 grams (g) of plutonium will fit in a one quart container using a surrogate equivalent volume and that 100 grams of Pu will fit in a one quart Savy container.

  15. Human Rights Education and the Post Secular Turn

    Bowie, Bob

    2012-01-01

    This article questions whether human rights education (HRE) scholarship is responding adequately to the post secular turn in thinking about the place and nature of religion in society. Here the post secular turn is used to describe the discrediting of secularisation theory, the recognition of religion as an enduring and pervasive global cultural…

  16. Turn over management and optimization of Shangdong nuclear power plant

    Zheng Tong

    2014-01-01

    After the equipments' installation is completed, the system will carry out commissioning tests. After commissioning work is completed, the system will be transferred to temporary operation. The plant buildings and structures will be transferred to operation for management and maintenance after civil work. The turn over work is an important part of the transfer from construction to operation. The article describes the significance of the nuclear power plant turn over work, turn over organization and management mode, the workflow of system turn over from construction to commissioning (TOP), turn over form commissioning to operation (TOTO), house hand over (HHO), building hand over (BHO) of Shandong Haiyang nuclear power plant, and analyze the current lack and future improvements of turn over work. Shandong Haiyang nuclear power plant will usher in the peak period of turn over work in 2013, fully aware of the importance of the turn over work, will play a key role in the long-term stable operation of the unit. (author)

  17. An expert machine tools selection system for turning operation

    Tan, C.F.; Khalil, S.N.; Karjanto, J.; Wahidin, L.S.; Chen, W.; Rauterberg, G.W.M.

    2015-01-01

    The turning machining process is an important process in the manufacturing industry. It is important to select the right tool for the turning process so that the manufacturing cost will be decreased. The main objective of this research is to select the most suitable machine tools with respect to

  18. Head turning as a prominent motor symptom in status epilepticus.

    Bauer, Gerhard; Broessner, Gregor; Unterberger, Iris; Walser, Gerald; Pfausler, Bettina; Trinka, Eugen

    2008-06-01

    Head and eye turning is frequently observed during seizures. Versions with tonic and/or clonic symptoms can be differentiated from smooth head deviations. Head turning as a prominent symptom of status epilepticus has not previously been reported. We present eight case reports, (7 women/1 man, mean age 41 years, median 41.5, range 10 to 74), of status epilepticus (SE), with head turning as a prominent motor symptom. Six were accompanied by continuous frontal, occipital and temporal ictal epileptiform discharges. Furthermore, two patients had absence status with rhythmic and clonic head versions. While the localizing significance of head turnings in SE is low, in our cases, the direction was away from the discharging hemisphere in all cases of focal SE regardless of whether the turning was classified as version (three cases) or deviation (three cases). In this small series of SE, the classical observation of a patient looking away from the discharging hemisphere is still valid.

  19. Experience sharing, emotional reciprocity, and turn-taking

    Melisa eStevanovic

    2015-04-01

    Full Text Available In this perspective article, we consider the relationship between experience sharing and turn-taking. There is much evidence suggesting that human social interaction is permeated by two temporal organizations: (1 the sequential framework of turn-taking and (2 the concurrent framework of emotional reciprocity. From this perspective, we introduce two alternative hypotheses about how the relationship between experience sharing and turn-taking could be viewed. According to the first hypothesis, the home environment of experience sharing is in the concurrent framework of emotional reciprocity, while the motivation to share experiences is in tension with the sequential framework of turn-taking. According to the second hypothesis, then again, people’s inclination to coordinate their actions in terms of turn-taking is motivated precisely by their propensity to share experiences. We consider theoretical and empirical ideas in favor of both of these hypotheses and discuss their implications for future research.

  20. Distance majorization and its applications.

    Chi, Eric C; Zhou, Hua; Lange, Kenneth

    2014-08-01

    The problem of minimizing a continuously differentiable convex function over an intersection of closed convex sets is ubiquitous in applied mathematics. It is particularly interesting when it is easy to project onto each separate set, but nontrivial to project onto their intersection. Algorithms based on Newton's method such as the interior point method are viable for small to medium-scale problems. However, modern applications in statistics, engineering, and machine learning are posing problems with potentially tens of thousands of parameters or more. We revisit this convex programming problem and propose an algorithm that scales well with dimensionality. Our proposal is an instance of a sequential unconstrained minimization technique and revolves around three ideas: the majorization-minimization principle, the classical penalty method for constrained optimization, and quasi-Newton acceleration of fixed-point algorithms. The performance of our distance majorization algorithms is illustrated in several applications.

  1. Measuring Operational Success: Establishing Criteria to Benchmark the Point of Culmination

    Caraccilo, Dominic

    1997-01-01

    ... has for the establishment of criteria that measure operational success on the battlefield. This void, in-turn, impacts directly on the operational commander's capability to identify his point(s) of culmination...

  2. Development process and data management of TurnSTEP, a STEP-compliant CNC system for turning

    Choi, I.; Suh, S.-H; Kim, K.; Song, M.S.; Jang, M.; Lee, B.-E.

    2006-01-01

    TurnSTEP is one of the earliest STEP-compliant CNC systems for turning. Based on the STEP-NC data model formalized as ISO 14649-12 and 121, it is designed to support intelligent and autonomous control of NC machines for e-manufacturing. The present paper introduces the development process and data

  3. Recent developments in turning hardened steels - A review

    Sivaraman, V.; Prakash, S.

    2017-05-01

    Hard materials ranging from HRC 45 - 68 such as hardened AISI H13, AISI 4340, AISI 52100, D2 STL, D3 STEEL Steel etc., need super hard tool materials to machine. Turning of these hard materials is termed as hard turning. Hard turning makes possible direct machining of the hard materials and also eliminates the lubricant requirement and thus favoring dry machining. Hard turning is a finish turning process and hence conventional grinding is not required. Development of the new advanced super hard tool materials such as ceramic inserts, Cubic Boron Nitride, Polycrystalline Cubic Boron Nitride etc. enabled the turning of these materials. PVD and CVD methods of coating have made easier the production of single and multi layered coated tool inserts. Coatings of TiN, TiAlN, TiC, Al2O3, AlCrN over cemented carbide inserts has lead to the machining of difficult to machine materials. Advancement in the process of hard machining paved way for better surface finish, long tool life, reduced tool wear, cutting force and cutting temperatures. Micro and Nano coated carbide inserts, nanocomposite coated PCBN inserts, micro and nano CBN coated carbide inserts and similar developments have made machining of hardened steels much easier and economical. In this paper, broad literature review on turning of hardened steels including optimizing process parameters, cooling requirements, different tool materials etc., are done.

  4. Turn stability in beta-hairpin peptides: Investigation of peptides containing 3:5 type I G1 bulge turns.

    Blandl, Tamas; Cochran, Andrea G; Skelton, Nicholas J

    2003-02-01

    The turn-forming ability of a series of three-residue sequences was investigated by substituting them into a well-characterized beta-hairpin peptide. The starting scaffold, bhpW, is a disulfide-cyclized 10-residue peptide that folds into a stable beta-hairpin with two antiparallel strands connected by a two-residue reverse turn. Substitution of the central two residues with the three-residue test sequences leads to less stable hairpins, as judged by thiol-disulfide equilibrium measurements. However, analysis of NMR parameters indicated that each molecule retains a significant folded population, and that the type of turn adopted by the three-residue sequence is the same in all cases. The solution structure of a selected peptide with a PDG turn contained an antiparallel beta-hairpin with a 3:5 type I + G1 bulge turn. Analysis of the energetic contributions of individual turn residues in the series of peptides indicates that substitution effects have significant context dependence, limiting the predictive power of individual amino acid propensities for turn formation. The most stable and least stable sequences were also substituted into a more stable disulfide-cyclized scaffold and a linear beta-hairpin scaffold. The relative stabilities remained the same, suggesting that experimental measurements in the bhpW context are a useful way to evaluate turn stability for use in protein design projects. Moreover, these scaffolds are capable of displaying a diverse set of turns, which can be exploited for the mimicry of protein loops or for generating libraries of reverse turns.

  5. Increasing protein stability by improving beta-turns.

    Fu, Hailong; Grimsley, Gerald R; Razvi, Abbas; Scholtz, J Martin; Pace, C Nick

    2009-11-15

    Our goal was to gain a better understanding of how protein stability can be increased by improving beta-turns. We studied 22 beta-turns in nine proteins with 66-370 residues by replacing other residues with proline and glycine and measuring the stability. These two residues are statistically preferred in some beta-turn positions. We studied: Cold shock protein B (CspB), Histidine-containing phosphocarrier protein, Ubiquitin, Ribonucleases Sa2, Sa3, T1, and HI, Tryptophan synthetase alpha-subunit, and Maltose binding protein. Of the 15 single proline mutations, 11 increased stability (Average = 0.8 +/- 0.3; Range = 0.3-1.5 kcal/mol), and the stabilizing effect of double proline mutants was additive. On the basis of this and our previous work, we conclude that proteins can generally be stabilized by replacing nonproline residues with proline residues at the i + 1 position of Type I and II beta-turns and at the i position in Type II beta-turns. Other turn positions can sometimes be used if the phi angle is near -60 degrees for the residue replaced. It is important that the side chain of the residue replaced is less than 50% buried. Identical substitutions in beta-turns in related proteins give similar results. Proline substitutions increase stability mainly by decreasing the entropy of the denatured state. In contrast, the large, diverse group of proteins considered here had almost no residues in beta-turns that could be replaced by Gly to increase protein stability. Improving beta-turns by substituting Pro residues is a generally useful way of increasing protein stability. 2009 Wiley-Liss, Inc.

  6. Housing the "Other" Half: American Studies' Global Urban Turn

    David Faflik

    2010-03-01

    Full Text Available

    Over the course of its short lifetime, the discipline of American studies has utilized a series of self-defining metaphors. With each successive paradigm shift in the field, each of these disciplinary figures, in turn, has been found wanting, and so replaced. American studies’ current, if not consensual, metaphor—the “border”—resembles not a few of its predecessors in that it is spatial in nature and effectively doubles as a figuration of the greater nation. The premise of this paper is that the “border,” like the figures that came before it, has outlived its serviceable purpose for a discipline that continues to evolve.

    This essay proposes the global city, or, more accurately, the global slum, as a post-“border” metaphor peculiarly adapted to the principled transnationalism that now defines American studies for many subscribing students and professionals. On the one hand, the urban has become a prevailing demographic fact in this, the new century. Thus, the multiethnic, multinational world metropolis recommends itself as a more-than-metaphor for the dynamic cultural contact that typifies ascendant hemispheric conceptions of the Americas. On the other hand, the figure of the peripheral city similarly, and spatially, evokes the majority “center” and minority “margin” model of American studies that critics would claim inhibits total global integration among the discipline’s geoculturally diverse practitioners, many of whom reside outside the continental United States. This essay conceptually deploys the world city to explore beyond these professional/territorial “borders.” Its three condensed case studies—first, of Gilded Age Manhattan, second, of the modern Turkish metropolis, and third, of a reunified Germany’s ethnic ghetto—constitute a brisk figurative exercise in “marginal” urban migration, wherein resides an alternate model, and metaphor, of American studies praxis today.

  7. Beam polarization during a Siberian snake turn-on

    Anferov, Vladimir A.

    1999-01-01

    Installing Siberian snakes in a circular proton accelerator allows one to overcome all spin depolarizing resonances even at very high energies. However, Siberian snake application at low energies is technically rather difficult. Turning snake on at some energy during acceleration would allow using Siberian snakes even in rings with low injection energies. It is shown that the beam polarization would be preserved during the snake ramp, provided that the snake is turned on in more than ten turns, and the energy is set near a half-integer Gγ

  8. Observation of diamond turned OFHC copper using Scanning Tunneling Microscopy

    Grigg, D.A.; Russell, P.E.; Dow, T.A.

    1988-12-01

    Diamond turned OFHC copper samples have been observed within the past few months using the Scanning Tunneling Microscope. Initial results have shown evidence of artifacts which may be used to better understand the diamond turning process. The STM`s high resolution capability and three dimensional data representation allows observation and study of surface features unobtainable with conventional profilometry systems. Also, the STM offers a better quantitative means by which to analyze surface structures than the SEM. This paper discusses findings on several diamond turned OFHC copper samples having different cutting conditions. Each sample has been cross referenced using STM and SEM.

  9. Personality, academic majors and performance

    Vedel, Anna; Thomsen, Dorthe Kirkegaard; Larsen, Lars

    2015-01-01

    Personality–performance research typically uses samples of psychology students without questioning their representativeness. The present article reports two studies challenging this practice. Study 1: group differences in the Big Five personality traits were explored between students (N = 1067......) in different academic majors (medicine, psychology, law, economics, political science, science, and arts/humanities), who were tested immediately after university enrolment. Study 2: six and a half years later the students’ academic records were obtained, and predictive validity of the Big Five personality...... traits and their subordinate facets was examined in the various academic majors in relation to Grade Point Average (GPA). Significant group differences in all Big Five personality traits were found between students in different academic majors. Also, variability in predictive validity of the Big Five...

  10. Safety effectiveness of pavement design treatment at intersections: Left turning vehicles and pedestrians on crosswalks

    Hasina Iasmin

    2016-07-01

    Full Text Available Pedestrians are the most vulnerable road users as they are more exposed than other road users. Pedestrian safety at road intersections still remains the most vital and yet unsolved issue. One of the critical points in pedestrian safety is the occurrence of accidents between left-turning vehicle and pedestrians on crosswalks at signalized intersections. A crosswalk is a place designated for pedestrians and cyclists to cross vehicular roads safely. Drivers are expected to give priority to pedestrians or cyclists during interactions between them on the crosswalk. If a driver exhibits non-yielding behavior, the interaction will turn into a collision. This study examined the safety effect of three crosswalks designed with different materials such as red-colored material or brick pavement based on a safety performance study. The safety performance study considered left-turning driver's gap acceptance behavior and the severity of traffic conflict events between left-turning vehicles and pedestrians. The results of the study indicates that using brick pavement on a crosswalk increases the safety level of the crosswalk. Drivers at such crosswalks are more acquiescent to the priority rule.

  11. [Pharmacovigilance of major parmaceutical innovation].

    Xiang, Yongyang; Xie, Yanming; Yi, Danhui

    2011-10-01

    With the continuous improvement of international "pharmacovigilance" technology and methods,it becomes the key part of the post-marketing evaluation. This issue is based on this research background, and also means to find out the Chinese medicine safety monitor which consistents with the reality. A common problem is that those who choose a career in pharmacovigilance know how the complex data presented to us are a source of both fascination and frustration. In the 70's, for the first time data mining technology in the international pharmacovigilance turn up, we try to establish new signal detection method to make contributes to post-marketing evaluation of Chinese medicine and establishment of registration. Building the national adverse reaction reporting database is widely used in western country. Nature of the problem is that pharmacovigilance issues can come through a lot of assumptions into the statistical problems, different assumptions are for different statistical tests. Through the traditional imbalance between the proportion of fourfold table for other assumptions, few countries use in practice, this does not involve evidence, but this issue provides the introduce of the principle. Methods include the ratio of the report of the Netherlands (ROR), the proportion of reports than the UK ratio (PRR),WHO's information points (IC), the U.S. Food and Drug Administration empirical Bayes (EBS), etc. Because there is no international gold standard of the signal detection method, at first we use the simulation comparing these four methods of data mining, From the point of specificity, the sample size demand, this issue views the advantages and disadvantages of four methods and application conditions,and from a technical point of view and try to propose a new signal detection method, for example, Hierarchical Bayesian.

  12. Major Sport Venues

    Department of Homeland Security — The Major Public Venues dataset is composed of facilities that host events for the National Association for Stock Car Auto Racing, Indy Racing League, Major League...

  13. Major Depression Among Adults

    ... Depressive Episode Among Adolescents Data Sources Share Major Depression Definitions Major depression is one of the most ... Bethesda, MD 20892-9663 Follow Us Facebook Twitter YouTube Google Plus NIMH Newsletter NIMH RSS Feed NIMH ...

  14. Remaking "Nature". the Ecological Turn in Dutch Water Management

    Disco, Nil/Cornelis

    2002-01-01

    The ecological turn in water management has usually been interpreted as a political andcultural rather than technical and professional accomplishment. The dynamics of theuptake of ecological expertise into hydraulic engineering bureaucracies have not beenwell described. Focusing on the controversy

  15. ANALYSIS OF CHIP FORMATION DURING HARD TURNING THROUGH ACOUSTIC EMISSION

    Miroslav Neslušan

    2012-01-01

    Full Text Available The paper deals with analysis of chip formation and related aspects of the chip formation during turning hardened steel 100Cr6. The paper draws a comparison of some aspects of the chip formation between turning annealed and hardened roll bearing steel. The results of the analysis show that there is the formation of a segmented chip in the case of hard turning. Frequency of segmentation is very high. A conventional piezoelectric dynamometer limits the frequency response to about 3.5 kHz. On the other hand, the frequency of process fluctuation may by obtained by using accelerometers or acoustic emission. This paper reports about the dynamic character of cutting process when hard turning and correlation among the calculated segmentation frequencies and the experimental analysis.

  16. Models and Algorithms for Tracking Target with Coordinated Turn Motion

    Xianghui Yuan

    2014-01-01

    Full Text Available Tracking target with coordinated turn (CT motion is highly dependent on the models and algorithms. First, the widely used models are compared in this paper—coordinated turn (CT model with known turn rate, augmented coordinated turn (ACT model with Cartesian velocity, ACT model with polar velocity, CT model using a kinematic constraint, and maneuver centered circular motion model. Then, in the single model tracking framework, the tracking algorithms for the last four models are compared and the suggestions on the choice of models for different practical target tracking problems are given. Finally, in the multiple models (MM framework, the algorithm based on expectation maximization (EM algorithm is derived, including both the batch form and the recursive form. Compared with the widely used interacting multiple model (IMM algorithm, the EM algorithm shows its effectiveness.

  17. Experimentation and Prediction of Temperature Rise in Turning ...

    Experimentation and Prediction of Temperature Rise in Turning Process using Response Surface Methodology. ... Science, Technology and Arts Research Journal. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue ...

  18. Treatment of uranium turning with the controllable oxidizing process

    Shen Bingyi; Zhang Yonggang; Zhen Huikuan

    1989-02-01

    The concept, procedure and safety measures of the controllable oxidizing for uranium turning is described. The feasibility study on technological process has been made. The process provided several advantages such as: simplicity of operation, no pollution environment, safety, high efficiency and low energy consumption. The process can yield nuclear pure uranium dioxide under making no use of a great number of chemical reagent. It may supply raw material for fluoration and provide a simply method of treatment for safe store of uranium turning

  19. Learning, Teaching, and Turn Taking in the Repeated Assignment Game

    Timothy N. Cason; Sau-Him Paul Lau; Vai-Lam Mui

    2011-01-01

    History-dependent strategies are often used to support cooperation in repeated game models. Using the indefinitely repeated common-pool resource assignment game and a perfect stranger experimental design, this paper reports novel evidence that players who have successfully used an efficiency-enhancing turn-taking strategy will teach other players in subsequent supergames to adopt this strategy. We find that subjects engage in turn taking frequently in both the Low Conflict and the High Confli...

  20. Ignition experiment in a single-turn-coil tokamak

    Carrera, R.; Driga, M.; Gully, J.H.

    1989-01-01

    A novel concept for a fusion ignition experiment, IGNITEX proposed along the lines of previous ideas for a compact thermonuclear device is analyzed. A single-turn-coil tokamak is analyzed. A single-turn-coil tokamak supplied by homopolar generators can ohmically heat a DT plasma to ignition conditions and maintain a thermally stable ignited phase for about ten energy confinement times. The IGNITEX experiment can provide a simple and relatively inexpensive way to produce and control ignited plasmas for scientific study

  1. Extended phenotype: nematodes turn ants into bird-dispersed fruits

    Hughes, D P; Kronauer, D J C; Boomsma, J J

    2008-01-01

    A recent study has discovered a novel extended phenotype of a nematode which alters its ant host to resemble ripe fruit. The infected ants are in turn eaten by frugivorous birds that disperse the nematode's eggs.......A recent study has discovered a novel extended phenotype of a nematode which alters its ant host to resemble ripe fruit. The infected ants are in turn eaten by frugivorous birds that disperse the nematode's eggs....

  2. 3D characterisation of tool wear whilst diamond turning silicon

    Durazo-Cardenas, Isidro Sergio; Shore, Paul; Luo, X.; Jacklin, T.; Impey, S. A.; Cox, A.

    2006-01-01

    Nanometrically smooth infrared silicon optics can be manufactured by the diamond turning process. Due to its relatively low density, silicon is an ideal optical material for weight sensitive infrared (IR) applications. However, rapid diamond tool edge degradation and the effect on the achieved surface have prevented significant exploitation. With the aim of developing a process model to optimise the diamond turning of silicon optics, a series of experimental trials were devi...

  3. Development of a Low Cost MQL Setup for Turning Operations

    Islam Sumaiya; Khandoker Noman; Izham Mohamad; Azizi Tengku; Debnath Sujan

    2017-01-01

    In this study, the effect of MQL application on the tool wear, surface roughness and chip formation in turning Aluminum alloy 6061 is investigated. Experiments were carried out by plain turning of an Aluminum bar with varying depth of cut, cutting speeds (spindle speed) and cutting environments (Dry, Wet and MQL). A newly designed, cost efficient and portable MQL setup was developed for this study. For each experimental trial, five passes were carried out in order to promote the formation of ...

  4. Compensations for increased rotational inertia during human cutting turns.

    Qiao, Mu; Brown, Brian; Jindrich, Devin L

    2014-02-01

    Locomotion in a complex environment is often not steady state, but unsteady locomotion (stability and maneuverability) is not well understood. We investigated the strategies used by humans to perform sidestep cutting turns when running. Previous studies have argued that because humans have small yaw rotational moments of inertia relative to body mass, deceleratory forces in the initial velocity direction that occur during the turning step, or 'braking' forces, could function to prevent body over-rotation during turns. We tested this hypothesis by increasing body rotational inertia and testing whether braking forces during stance decreased. We recorded ground reaction force and body kinematics from seven participants performing 45 deg sidestep cutting turns and straight running at five levels of body rotational inertia, with increases up to fourfold. Contrary to our prediction, braking forces remained consistent at different rotational inertias, facilitated by anticipatory changes to body rotational speed. Increasing inertia revealed that the opposing effects of several turning parameters, including rotation due to symmetrical anterior-posterior forces, result in a system that can compensate for fourfold changes in rotational inertia with less than 50% changes to rotational velocity. These results suggest that in submaximal effort turning, legged systems may be robust to changes in morphological parameters, and that compensations can involve relatively minor adjustments between steps to change initial stance conditions.

  5. Effect of stern hull shape on turning circle of ships

    Jaswar, Maimun, A.; Wahid, M. A.; Priyanto, A.; Zamani, Pauzi, Saman

    2012-06-01

    Many factors such as: stern hull shape, length, draught, trim, propulsion system and external forces affecting the drift angle influence rate of turn and size of turning circle of ships. This paper discusses turning circle characteristics of U and V stern hull shape of Very Large Crude Oil Carrier (VLCC) ships. The ships have same principal dimension such as length, beam, and draught. The turning circle characteristics of the VLCC ships are simulated at 35 degree of rudder angle. In the analysis, firstly, turning circle performance of U-type VLCC ship is simulated. In the simulation, initial ship speed is determined using given power and rpm. Hydrodynamic derivatives coefficients are determined by including effect of fullness of aft run. Using the obtained, speed and hydrodynamic coefficients, force and moment acting on hull, force and moment induced by propeller, force and moment induced by rudder are determined. Finally, ship trajectory, ratio of speed, yaw angle and drift angle are determined. Results of simulation results of the VLCC ship are compared with the experimental one as validation. Using the same method, V-type VLCC is simulated and the simulation results are compared with U-type VLCC ship. Results shows the turning circle of U-type is larger than V-type due to effect stern hul results of simulation are.

  6. Structure of a rare non-standard sequence k-turn bound by L7Ae protein

    Huang, Lin; Lilley, David M.J.

    2014-01-01

    Kt-23 from Thelohania solenopsae is a rare RNA kink turn (k-turn) where an adenine replaces the normal guanine at the 2n position. L7Ae is a member of a strongly conserved family of proteins that bind a range of k-turn structures in the ribosome, box C/D and H/ACA small nucleolar RNAs and U4 small nuclear RNA. We have solved the crystal structure of T. solenopsae Kt-23 RNA bound to Archeoglobus fulgidus L7Ae protein at a resolution of 2.95 Å. The protein binds in the major groove displayed on the outer face of the k-turn, in a manner similar to complexes with standard k-turn structures. The k-turn adopts a standard N3 class conformation, with a single hydrogen bond from A2b N6 to A2n N3. This contrasts with the structure of the same sequence located in the SAM-I riboswitch, where it adopts an N1 structure, showing the inherent plasticity of k-turn structure. This potentially can affect any tertiary interactions in which the RNA participates. PMID:24482444

  7. Modeling Left-Turn Driving Behavior at Signalized Intersections with Mixed Traffic Conditions

    Hong Li

    2016-01-01

    Full Text Available In many developing countries, mixed traffic is the most common type of urban transportation; traffic of this type faces many major problems in traffic engineering, such as conflicts, inefficiency, and security issues. This paper focuses on the traffic engineering concerns on the driving behavior of left-turning vehicles caused by different degrees of pedestrian violations. The traffic characteristics of left-turning vehicles and pedestrians in the affected region at a signalized intersection were analyzed and a cellular-automata-based “following-conflict” driving behavior model that mainly addresses four basic behavior modes was proposed to study the conflict and behavior mechanisms of left-turning vehicles by mathematic methodologies. Four basic driving behavior modes were reproduced in computer simulations, and a logit model of the behavior mode choice was also developed to analyze the relative share of each behavior mode. Finally, the microscopic characteristics of driving behaviors and the macroscopic parameters of traffic flow in the affected region were all determined. These data are important reference for geometry and capacity design for signalized intersections. The simulation results show that the proposed models are valid and can be used to represent the behavior of left-turning vehicles in the case of conflicts with illegally crossing pedestrians. These results will have potential applications on improving traffic safety and traffic capacity at signalized intersections with mixed traffic conditions.

  8. The End of Points

    Feldman, Jo

    2018-01-01

    Have teachers become too dependent on points? This article explores educators' dependency on their points systems, and the ways that points can distract teachers from really analyzing students' capabilities and achievements. Feldman argues that using a more subjective grading system can help illuminate crucial information about students and what…

  9. Demerit points systems.

    2006-01-01

    In 2012, 21 of the 27 EU Member States had some form of demerit points system. In theory, demerit points systems contribute to road safety through three mechanisms: 1) prevention of unsafe behaviour through the risk of receiving penalty points, 2) selection and suspension of the most frequent

  10. Semiautomatic machine for turning inside out industrial leather gloves

    Aragón-Gonzalez, G; Cano-Blanco, M; León-Galicia, A; Medrano-Sierra, L F; Morales-Gómez, J R

    2015-01-01

    The last step in the industrial leather gloves manufacturing is to turn the inside out so that the sewing be in the inside of the glove. This work presents the design and testing of a machine for that purpose. In order to quantify the relevant variables, testing was performed with a prototype glove. The employed devices and the testing proceeding were developed experimentally. The obtained information was used to build the turning inside out machine. This machine works with pneumatic power to carry the inside out turning by means of double effect lineal actuators. It has two independent work stations that could be operated simultaneously by two persons, one in each station or in single mode operating one station by one person. The turning inside out cycle is started by means of directional control valves operated with pedals. The velocity and developed force by the actuators is controlled with typical pneumatic resources. The geometrical dimensions of the machine are: 1.15 m length; 0.71 m width and 2.15 m high. Its approximated weight is 120 kg. The air consumption is 5.4 fps by each working station with 60 psig work pressure. The turning inside out operation is 40 s for each industrial leather glove

  11. Postural hemodynamic changes after turning to prone position

    Микола Віталійович Лизогуб

    2015-03-01

    Full Text Available Background of study. Prone position is one of the most complex positions for anesthesiologist as it is accompanied by several physiological changes that can lead to specific complications. Hemodynamic changes are most controversial.Aim of study was to establish hemodynamic changes in non-anaesthetized patients in prone position depending on body mass index.Material and methods. We examined central hemodynamics in 40 patients the day before surgery using thoracic rheography in supine position, in prone position 5 min after turning and in prone position 20 min after turning. Patients were divided into 2 groups according to body mass index (18-25 and 26-35.Results. Patients with normal body weight did not have any hemodynamic changes after turning to prone position. Patients with increased body weight had higher cardiac index. After turning to prone position obese patients’ cardiac output and cardiac index reduced 22% comparing with supine position. After 20 min in prone position these hemodynamic parameters were found to be reduced to the same level.Conclusion. Significant hemodynamic changes after turning from supine to prone position were revealed only in patients with increased body mass index. In these patients cardiac index in prone position was reduced by 22% comparing to supine position

  12. [Abnormal head turn in a patient with Brown's syndrome].

    van Waveren, M; Krzizok, T; Besch, D

    2008-08-01

    We report on an eight-year-old boy, who was presented in our clinic because of head turn. The cause of the tortecollis (ocular or general) in this case was and still cannot be explained. Only by applying extensive prism adaptation tests it was possible to prove the ocular character of the head turn. An eight-year-old boy with Brown's syndrome was referred to us because of a head tilt to the left side. Six months previously surgery on the M. obl. superior of the right eye was performed in another clinic. No improvement of the head tilt could be observed after the operation. In addition, an exotropia became decompensated. Under a 3-day occlusion of one eye, no change of the head turn and the squint could be measured. No other cause of the head turn could be found by an orthopaedist and a paediatrist. Under a prism of 20 cm/m basis in and 10 cm/m basis against the positive vertical deviation, the head tilt decreased, so that we decided to do a second surgery. The head tilting had not resumed at one year after the surgery. Although the initial diagnostic findings ruled out an ocular cause, it was possible to lessen the head tilting with the aid of the prism adaptation test. This case study emphasises the usefulness of a prism adaptation test of several days duration in order to validate an ocular cause of head turn and to determine an adequate indication for surgery.

  13. High speed turning of compacted graphite iron using controlled modulation

    Stalbaum, Tyler Paul

    Compacted graphite iron (CGI) is a material which emerged as a candidate material to replace cast iron (CI) in the automotive industry for engine block castings. Its thermal and mechanical properties allow the CGI-based engines to operate at higher cylinder pressures and temperatures than CI-based engines, allowing for lower fuel emissions and increased fuel economy. However, these same properties together with the thermomechanical wear mode in the CGI-CBN system result in poor machinability and inhibit CGI from seeing wide spread use in the automotive industry. In industry, machining of CGI is done only at low speeds, less than V = 200 m/min, to avoid encountering rapid wear of the cutting tools during cutting. Studies have suggested intermittent cutting operations such as milling suffer less severe tool wear than continuous cutting. Furthermore, evidence that a hard sulfide layer which forms over the cutting edge in machining CI at high speeds is absent during machining CGI is a major factor in the difference in machinability of these material systems. The present study addresses both of these issues by modification to the conventional machining process to allow intermittent continuous cutting. The application of controlled modulation superimposed onto the cutting process -- modulation-assisted machining (MAM) -- is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining CGI at high machining speeds (> 500 m/min). The tool life is at least 20 times greater than found in conventional machining of CGI. This significant reduction in wear is a consequence of reduction in the severity of the tool-work contact conditions with MAM. The propensity for thermochemical wear of CBN is thus reduced. It is found that higher cutting speed (> 700 m/min) leads to lower tool wear with MAM. The MAM configuration employing feed-direction modulation appears feasible for implementation at high speeds and offers a solution to this challenging

  14. Point specificity in acupuncture

    Choi Emma M

    2012-02-01

    Full Text Available Abstract The existence of point specificity in acupuncture is controversial, because many acupuncture studies using this principle to select control points have found that sham acupoints have similar effects to those of verum acupoints. Furthermore, the results of pain-related studies based on visual analogue scales have not supported the concept of point specificity. In contrast, hemodynamic, functional magnetic resonance imaging and neurophysiological studies evaluating the responses to stimulation of multiple points on the body surface have shown that point-specific actions are present. This review article focuses on clinical and laboratory studies supporting the existence of point specificity in acupuncture and also addresses studies that do not support this concept. Further research is needed to elucidate the point-specific actions of acupuncture.

  15. A novel hybrid method of beta-turn identification in protein using binary logistic regression and neural network.

    Asghari, Mehdi Poursheikhali; Hayatshahi, Sayyed Hamed Sadat; Abdolmaleki, Parviz

    2012-01-01

    From both the structural and functional points of view, β-turns play important biological roles in proteins. In the present study, a novel two-stage hybrid procedure has been developed to identify β-turns in proteins. Binary logistic regression was initially used for the first time to select significant sequence parameters in identification of β-turns due to a re-substitution test procedure. Sequence parameters were consisted of 80 amino acid positional occurrences and 20 amino acid percentages in sequence. Among these parameters, the most significant ones which were selected by binary logistic regression model, were percentages of Gly, Ser and the occurrence of Asn in position i+2, respectively, in sequence. These significant parameters have the highest effect on the constitution of a β-turn sequence. A neural network model was then constructed and fed by the parameters selected by binary logistic regression to build a hybrid predictor. The networks have been trained and tested on a non-homologous dataset of 565 protein chains. With applying a nine fold cross-validation test on the dataset, the network reached an overall accuracy (Qtotal) of 74, which is comparable with results of the other β-turn prediction methods. In conclusion, this study proves that the parameter selection ability of binary logistic regression together with the prediction capability of neural networks lead to the development of more precise models for identifying β-turns in proteins.

  16. Modeling of residual stress state in turning of 304L

    Valiorgue, F.; Rech, J.; Bergheau, J.M.

    2010-01-01

    Research presented in this paper aims to link machining parameters to residual stress state and helps understanding mechanisms responsible of machined surface properties modifications. The first presented works are based on an experimental campaign. They reproduce the finishing turning operation of 304L and allow observing the residual stress state evolution at the work piece surface and for an affected depth of 0.2 mm for such processes. Then, the finishing turning operation is simulated numerically in order to realize the same sensitivity study to cutting parameters. This simulation is based on an hybrid approach mixing experimental data and numerical simulation. This method allows getting round the classical difficulties of turning simulation by applying equivalent thermo mechanical loadings onto the work piece surface without modeling the material separation phenomena. Moreover the numerical model uses an hardening law taking into account dynamic recrystallization phenomena. (authors)

  17. Negotiating behavioural change: therapists' proposal turns in Cognitive Behavioural Therapy.

    Ekberg, Katie; Lecouteur, Amanda

    2012-01-01

    Cognitive behavioural therapy (CBT) is an internationally recognised method for treating depression. However, many of the techniques involved in CBT are accomplished within the therapy interaction in diverse ways, and with varying consequences for the trajectory of therapy session. This paper uses conversation analysis to examine some standard ways in which therapists propose suggestions for behavioural change to clients attending CBT sessions for depression in Australia. Therapists' proposal turns displayed their subordinate epistemic authority over the matter at hand, and emphasised a high degree of optionality on behalf of the client in accepting their suggestions. This practice was routinely accomplished via three standard proposal turns: (1) hedged recommendations; (2) interrogatives; and (3) information-giving. These proposal turns will be examined in relation to the negotiation of behavioural change, and the implications for CBT interactions between therapist and client will be discussed.

  18. Prospects after Major Trauma

    Holtslag, H.R.

    2007-01-01

    Introduction. After patients survived major trauma, their prospects, in terms of the consequences for functioning, are uncertain, which may impact severely on patient, family and society. The studies in this thesis describes the long-term outcomes of severe injured patients after major trauma. In

  19. Conformational interconversions in peptide beta-turns: analysis of turns in proteins and computational estimates of barriers.

    Gunasekaran, K; Gomathi, L; Ramakrishnan, C; Chandrasekhar, J; Balaram, P

    1998-12-18

    The two most important beta-turn features in peptides and proteins are the type I and type II turns, which differ mainly in the orientation of the central peptide unit. Facile conformational interconversion is possible, in principle, by a flip of the central peptide unit. Homologous crystal structures afford an opportunity to structurally characterize both possible conformational states, thus allowing identification of sites that are potentially stereochemically mobile. A representative data set of 250 high-resolution (turns that are assigned different conformational types (type I/type II) in related structures. A total of 55 examples of beta-turns were identified as possible candidates for a stereochemically mobile site. Of the 55 examples, 45 could be classified as a potential site for interconversion between type I and type II beta-turns, while ten correspond to flips from type I' to type II' structures. As a further check, the temperature factors of the central peptide unit carbonyl oxygen atom of the 55 examples were examined. The analysis reveals that the turn assignments are indeed reliable. Examination of the secondary structures at the flanking positions of the flippable beta-turns reveals that seven examples occur in the loop region of beta-hairpins, indicating that the formation of ordered secondary structures on either side of the beta-turn does not preclude local conformational variations. In these beta-turns, Pro (11 examples), Lys (nine examples) and Ser (seven examples) were most often found at the i+1 position. Glycine was found to occur overwhelmingly at position i+2 (28 examples), while Ser (seven examples) and Asn (six examples) were amongst the most frequent residues. Activation energy barriers for the interconversion between type I and type II beta-turns were computed using the peptide models Ac-Pro-Aib-NHMe and Ac-Pro-Gly-NHMe within the framework of the AM1 semi-empirical molecular orbital procedure. In order to have a uniform basis for

  20. A survey report for the turning of biped locomotion robot

    Kato, Ichiro; Takanishi, Atsuo; Kume, Etsuo.

    1992-12-01

    A mechanical design study of biped locomotion robots is going on at JAERI within the scope of the Human Acts Simulation Program (HASP). The design study at JAERI is of an arbitrarily mobile robot for inspection of nuclear facilities. A survey has been performed for collecting useful information from already existing biped locomotion robots. This is a survey report for the turning of biped locomotion robot: the WL-10R designed and developed at Waseda University. This report includes the control method of turning, machine model and control system. (author)

  1. Spatial turn and animation practices inspired by cultural anthropology

    Agnieszka Wieszaczewska

    2016-09-01

    Full Text Available Spatial turn is one of the cultural turns, which have recently occurred in the humanities. It stresses the importance of issues such as space and place and can be successfully used as a theoretical perspective gaining use in thought over issues such as globalisation, transnationality, mapping but also education. In the discourses of pedagogical science space and place are considered through their multidimensional impact on education and learning. As significant concepts rooting pedagogy or pedagogy of borderland. The pedagogical reflection on space could be also used in the field of animation practices, especially in activities, which are related to place somehow colonised.

  2. Abolishment of Spontaneous Flight Turns in Visually Responsive Drosophila.

    Ferris, Bennett Drew; Green, Jonathan; Maimon, Gaby

    2018-01-22

    Animals react rapidly to external stimuli, such as an approaching predator, but in other circumstances, they seem to act spontaneously, without any obvious external trigger. How do the neural processes mediating the execution of reflexive and spontaneous actions differ? We studied this question in tethered, flying Drosophila. We found that silencing a large but genetically defined set of non-motor neurons virtually eliminates spontaneous flight turns while preserving the tethered flies' ability to perform two types of visually evoked turns, demonstrating that, at least in flies, these two modes of action are almost completely dissociable. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Evaluation of cutting force uncertainty components in turning

    Axinte, Dragos Aurelian; Belluco, Walter; De Chiffre, Leonardo

    2000-01-01

    A procedure is proposed for the evaluation of those uncertainty components of a single cutting force measurement in turning that are related to the contributions of the dynamometer calibration and the cutting process itself. Based on an empirical model including errors form both sources......, the uncertainty for a single measurement of cutting force is presented, and expressions for the expected uncertainty vs. cutting parameters are proposed. This approach gives the possibility of evaluating cutting force uncertainty components in turning, for a defined range of cutting parameters, based on few...

  4. Interesting Interest Points

    Aanæs, Henrik; Dahl, Anders Lindbjerg; Pedersen, Kim Steenstrup

    2012-01-01

    on spatial invariance of interest points under changing acquisition parameters by measuring the spatial recall rate. The scope of this paper is to investigate the performance of a number of existing well-established interest point detection methods. Automatic performance evaluation of interest points is hard......Not all interest points are equally interesting. The most valuable interest points lead to optimal performance of the computer vision method in which they are employed. But a measure of this kind will be dependent on the chosen vision application. We propose a more general performance measure based...... position. The LED illumination provides the option for artificially relighting the scene from a range of light directions. This data set has given us the ability to systematically evaluate the performance of a number of interest point detectors. The highlights of the conclusions are that the fixed scale...

  5. Synthetic Aperture Computation as the Head is Turned in Binaural Direction Finding

    Duncan Tamsett

    2017-03-01

    Full Text Available Binaural systems measure instantaneous time/level differences between acoustic signals received at the ears to determine angles λ between the auditory axis and directions to acoustic sources. An angle λ locates a source on a small circle of colatitude (a lamda circle on a sphere symmetric about the auditory axis. As the head is turned while listening to a sound, acoustic energy over successive instantaneous lamda circles is integrated in a virtual/subconscious field of audition. The directions in azimuth and elevation to maxima in integrated acoustic energy, or to points of intersection of lamda circles, are the directions to acoustic sources. This process in a robotic system, or in nature in a neural implementation equivalent to it, delivers its solutions to the aurally informed worldview. The process is analogous to migration applied to seismic profiler data, and to that in synthetic aperture radar/sonar systems. A slanting auditory axis, e.g., possessed by species of owl, leads to the auditory axis sweeping the surface of a cone as the head is turned about a single axis. Thus, the plane in which the auditory axis turns continuously changes, enabling robustly unambiguous directions to acoustic sources to be determined.

  6. OpenTURNS, an open source uncertainty engineering software

    Popelin, A.L.; Dufoy, A.

    2013-01-01

    The needs to assess robust performances for complex systems have lead to the emergence of a new industrial simulation challenge: to take into account uncertainties when dealing with complex numerical simulation frameworks. EDF has taken part in the development of an Open Source software platform dedicated to uncertainty propagation by probabilistic methods, named OpenTURNS for Open source Treatment of Uncertainty, Risk and Statistics. OpenTURNS includes a large variety of qualified algorithms in order to manage uncertainties in industrial studies, from the uncertainty quantification step (with possibilities to model stochastic dependence thanks to the copula theory and stochastic processes), to the uncertainty propagation step (with some innovative simulation algorithms as the ziggurat method for normal variables) and the sensitivity analysis one (with some sensitivity index based on the evaluation of means conditioned to the realization of a particular event). It also enables to build some response surfaces that can include the stochastic modeling (with the chaos polynomial method for example). Generic wrappers to link OpenTURNS to the modeling software are proposed. At last, OpenTURNS is largely documented to provide rules to help use and contribution

  7. Understanding the Linguistic Turn and the Quest for Meaning ...

    Apart from Dilthey the linguistic turn penetrated also the thought of thinkers such as Freud, Wittgenstein, Frankl, Heidegger, Habermas, Dooyeweerd and Gadamer, all of them (implicitly or explicitly) elaborated the initial criticism raised by Herder, Jacobi, Hamann, Heidegger and Gadamer against Kant's Critique of Pure ...

  8. Performances of cutting fluids in turning. Mineral oil - RM

    Axinte, Dragos Aurelian; Belluco, Walter

    1999-01-01

    Scope of the present measurement campaign is the evaluation of the cutting fluid performance. The report presents the standard routine and the results obtained when turning stainless steel and brass with a commercial vegetable based oil called RM. The methods were developed to be applicable...

  9. Performances of cutting fluids in turning. Vegetable based oil - RV

    Axinte, Dragos Aurelian; Belluco, Walter

    1999-01-01

    Scope of the present measurement campaign is the evaluation of the cutting fluid performance. The report presents the standard routine and the results obtained when turning stainless steel and brass with a commercial vegetable based oil called RV. The methods were developed to be applicable...

  10. Turn me on 100 easy ways to use solar energy

    Kodis, Michelle

    2009-01-01

    HERE COMES THE SUN! With page after page of creative and innovative ideas for using this limitless form of energy, as well as thoughtfully compiled lists of useful resources, Turn Me On is an introductory guide to understanding the exciting advances in a progressing technology that harnesses the boundless power of the sun to bring us clean, renewable energy.

  11. Turning of materials with high-speed abrasive waterjet

    Sitek, Libor; Hlaváček, Petr

    -, October 2016 (2016), s. 1160-1165 ISSN 1805-0476 R&D Projects: GA MŠk ED2.1.00/03.0082; GA MŠk(CZ) LO1406 Institutional support: RVO:68145535 Keywords : abrasive water jet machining * turning * steel * rock * wood Subject RIV: JQ - Machines ; Tools http://www.mmscience.eu/content/file/archives/MM_Science_201692.pdf

  12. Using Facebook Data to Turn Introductory Statistics Students into Consultants

    Childers, Adam F.

    2017-01-01

    Facebook provides businesses and organizations with copious data that describe how users are interacting with their page. This data affords an excellent opportunity to turn introductory statistics students into consultants to analyze the Facebook data using descriptive and inferential statistics. This paper details a semester-long project that…

  13. Characterization of jellyfish turning using 3D-PTV

    Xu, Nicole; Dabiri, John

    2017-11-01

    Aurelia aurita are oblate, radially symmetric jellyfish that consist of a gelatinous bell and subumbrellar muscle ring, which contracts to provide motive force. Swimming is typically modeled as a purely vertical motion; however, asymmetric activations of swim pacemakers (sensory organs that innervate the muscle at eight locations around the bell margin) result in turning and more complicated swim behaviors. More recent studies have examined flow fields around turning jellyfish, but the input/output relationship between locomotive controls and swim trajectories is unclear. To address this, bell kinematics for both straight swimming and turning are obtained using 3D particle tracking velocimetry (3D-PTV) by injecting biocompatible elastomer tags into the bell, illuminating the tank with ultraviolet light, and tracking the resulting fluorescent particles in a multi-camera setup. By understanding these kinematics in both natural and externally controlled free-swimming animals, we can connect neuromuscular control mechanisms to existing flow measurements of jellyfish turning for applications in designing more energy efficient biohybrid robots and underwater vehicles. NSF GRFP.

  14. Supply and demand of timber for wood turning in Maine

    Eric H. Wharton; Robert L., Jr. Nevel; Douglas S. Powell; Douglas S. Powell

    1987-01-01

    An analytical report on the volume of wood used by the wood-turning industry in Maine, and the volume of timber from the state's timberlands that may be suitable for turnstock. Findings are based on the third forest resource survey of Maine timberlands, and an industry canvass of primary manufacturing mills using wood from Maine timberlands, both conducted in 1982...

  15. Online Memorials 2.0: When Mourning Turns Social

    Gotved, Stine

    This paper investigates the turn from individual to social online mourning rituals and introduces a research project that follows a new memorial platform where the best from both sides are sought combined. The Danish online memorial site from 2000, mindet.dk, is about to launch in a version 2...

  16. Diamond turning and polishing tests on new RSP aluminium alloys

    Horst, R. ter; Haan, M. de; Gubbels, G.P.H.; Senden, R.; Venrooy, B.W.H. van; Hoogstrate, A.M.

    2012-01-01

    For years now conventional aluminium 6061 T6 has widely been used for mirrors in astronomical instruments, being diamond turned or since a few years also being optically polished. This allows the development of optical systems that can be tested and operated at any temperature, without being

  17. Student Wellbeing and the Therapeutic Turn in Education

    Wright, Katie

    2014-01-01

    This article considers current concerns with promoting student mental health and wellbeing against the backdrop of critiques of the "therapeutic turn" in education. It begins by situating accounts of "therapeutic education" within broader theorisation of therapeutic culture. In doing so, the importance of this work is…

  18. Universals and cultural variation in turn-taking in conversation

    Stivers, Tanya; Enfield, N. J.; Brown, Penelope; Englert, Christina; Hayashi, Makoto; Heinemann, Trine; Hoymann, Gertie; Rossano, Federico; de Ruiter, Jan Peter; Yoon, Kyung-Eun; Levinson, Stephen C.

    2009-01-01

    Informal verbal interaction is the core matrix for human social life. A mechanism for coordinating this basic mode of interaction is a system of turn-taking that regulates who is to speak and when. Yet relatively little is known about how this system varies across cultures. The anthropological

  19. CNC Turning Technician. A Competency-Based Instructional System.

    Sloan, Kelly; Hilley, Robert

    This competency-based curriculum guide for instructing students in using computer numerically controlled (CNC) turning machines is one of a series of instructional guides for the machinist field developed in Oklahoma. Although developed jointly with Baxter Technologies Corporation and oriented toward the Baxter Vo-Tec 2000 Future Builder CNC…

  20. Turning shopping habits of young consumers into green

    Bialkova, Svetlana; van 't Erve, Sanne; van Hoof, Joris Jasper; Pruyn, Adriaan T.H.; Bigné, Enrique

    2014-01-01

    Consumers have strong shopping habits, and although being aware of sustainable issues, they hardly do green shopping. Therefore, a challenging question is: how to break the old shopping habits and turn those into green? The current study addresses this question looking at barriers and potential

  1. Postcolonial turn : re-imagining anthropology and Africa

    Devisch, R.; Nyamnjoh, F.

    2011-01-01

    This book is a reflection on the mental decolonization of the postcolonialist turn in Africanist scholarship and is simultaneously a tribute to the late Professor Archibald Mafeje. A number of the articles, including the Introduction by A. Olukoshi and F. Nyamnjoh, are reprinted from the Codesria

  2. Diplomas Count 2013: Second Chances--Turning Dropouts into Graduates

    Education Week, 2013

    2013-01-01

    The 2013 edition of "Diplomas Count," entitled "Second Chances: Turning Dropouts into Graduates," examines dropout recovery and innovative strategies for returning to the educational fold the 1 million students who leave school without a diploma each year. "Education Week's" journalists investigate interventions that…

  3. Beyond 100 Tesla: Scientific experiments using single-turn coils

    Portugall, Oliver; Solane, Pierre Yves; Plochocka, Paulina; Maude, Duncan K.; Nicholas, Robin J.

    2013-01-01

    Current opportunities and recent examples for research in magnetic fields well above 100 T using single-turn coils are discussed. After a general introduction into basic principles and technical constraints associated with the generation of Megagauss fields we discuss data obtained at the LNCMI Toulouse, where such fields are routinely used for scientific applications.

  4. The turning of the wind in the atmospheric boundary layer

    Pena Diaz, Alfredo; Gryning, Sven-Erik; Floors, Rogier Ralph

    2014-01-01

    Here we use accurate observations of the wind speed vector to analyze the behavior with height of the wind direction. The observations are a combination of tall meteorological mast and long-range wind lidar measurements covering the entire atmospheric boundary layer. The observations were performed...... winds underpredict the turning of the wind and the boundary-layer winds in general....

  5. Turning value chains into social gains in Southeast Asia | CRDI ...

    Turning value chains into social gains in Southeast Asia. Global value chains, which now form the largest share of the world's trade, involve producers and enterprises that produce goods as inputs for other producers. In Southeast Asian countries, these industries employ large numbers of low-skilled workers, particularly ...

  6. Investing in Training and Development. Turning Interest into Capital.

    Pont, Tony

    This book, which is intended for individuals responsible for human resource development (HRD) programs, examines a number of issues in turning investments in training and development into human capital and examines ways of making the workplace an arena for development. The following topics are discussed: the nature and role of training and…

  7. Turning Sunlight into Electricity-Inorganic Solar Cells and Beyond

    Home; Journals; Resonance – Journal of Science Education; Volume 16; Issue 12. Turning Sunlight into Electricity - Inorganic Solar Cells and Beyond. A K Shukla. Volume 16 Issue 12 December 2011 pp 1294-1302. Fulltext. Click here to view fulltext PDF. Permanent link:

  8. Novel β-amyloid aggregation inhibitors possessing a turn mimic.

    Hamada, Yoshio; Miyamoto, Naoko; Kiso, Yoshiaki

    2015-04-01

    Amyloid β peptide, the main component of senile plaques found in the brain of Alzheimer disease (AD) patients, is a molecular target for AD therapeutic intervention. A number of potential AD therapeutics have been reported, including inhibitors of β-secretase, γ-secretase, and Aβ aggregation, and anti-amyloid agents, such as neprilysin, insulin degrading enzyme (IDE), and Aβ antibodies. Recently, we reported potent small-sized β-secretase (BACE1) inhibitors, which could serve as anti-AD drugs. However AD is a progressive disorder, where dementia symptoms gradually worsen over several decades, and therefore may require many years to get cured. One possible way to achieve a greater therapeutic effect is through simultaneous administration of multiple drugs, similar to those used in Highly Active Anti-Retroviral Therapy (HAART) used to treat AIDS. In order to overcome AD, we took a drug discovery approach to evaluate, novel β-amyloid aggregation inhibitors. Previously, we reported that a tong-type compound possessing a turn mimic as the inhibitor of HIV-1 protease dimerization. Oligomerized amyloid β peptides contain a turn structure within the molecule. Here, we designed and synthesized novel β-amyloid aggregation inhibitors with a turn-mimic template, based on the turn conformer of the oligomerized amyloid β peptides. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Social and Emotional Turn Taking for Embodied Conversational Agents

    Bruijnes, Merijn

    2012-01-01

    In this doctoral consortium paper I describe the theme of my research, the model-based generation of consistent emotional turn taking behavior in virtual human conversations and the evaluation of this behavior. My goal is to investigate and generate convincing social behavior in embodied

  10. The Digital Turn. How the internet transforms our existence

    Westera, Wim

    2014-01-01

    The presentation is based on my book The Dital Turn. The swift virtualisation of the world implies a radical change of the conditions of life. We have to cope with the fact that our experiences of the world will largely be mediated experiences, fuelled by data, cameras, sensors, indicators and

  11. The 'Turn to Parenting': Paradigm shift or work in progress?

    Hopman, M.; Knijn, G.C.M.

    In the field of child and youth support, preventive and parent-oriented support programs are currently emphasized. This is understood as a new paradigm of parenting support, which is sometimes referred to as “the turn to parenting.” Using Campbell’s (Annual Review of Sociology, 28:21–38, 2002),

  12. Major operations and activities

    Black, D.G.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report summarizes the major operations and activities on the site. These operations and activities include site management, waste management, environmental restoration and corrective actions, and research and technology development.

  13. A major safety overhaul

    2003-01-01

    A redefined policy, a revamped safety course, an environmental project... the TIS (Technical Inspection and Safety) Division has begun a major safety overhaul. Its new head, Wolfgang Weingarten, explains to the Bulletin why and how this is happening.

  14. Allegheny County Major Rivers

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains locations of major rivers that flow through Allegheny County. These shapes have been taken from the Hydrology dataset. The Ohio River,...

  15. Major operations and activities

    Black, D.G.

    1995-01-01

    This section of the 1994 Hanford Site Environmental Report summarizes the major operations and activities on the site. These operations and activities include site management, waste management, environmental restoration and corrective actions, and research and technology development

  16. Fixed point algebras for easy quantum groups

    Gabriel, Olivier; Weber, Moritz

    2016-01-01

    Compact matrix quantum groups act naturally on Cuntz algebras. The first author isolated certain conditions under which the fixed point algebras under this action are Kirchberg algebras. Hence they are completely determined by their K-groups. Building on prior work by the second author,we prove...... that free easy quantum groups satisfy these conditions and we compute the K-groups of their fixed point algebras in a general form. We then turn to examples such as the quantum permutation group S+ n,the free orthogonal quantum group O+ n and the quantum reflection groups Hs+ n. Our fixed point......-algebra construction provides concrete examples of free actions of free orthogonal easy quantum groups,which are related to Hopf-Galois extensions....

  17. Causal Role of Motor Simulation in Turn-Taking Behavior.

    Hadley, Lauren V; Novembre, Giacomo; Keller, Peter E; Pickering, Martin J

    2015-12-16

    Overlap between sensory and motor representations has been documented for a range of human actions, from grasping (Rizzolatti et al., 1996b) to playing a musical instrument (Novembre and Keller, 2014). Such overlap suggests that individuals use motor simulation to predict the outcome of observed actions (Wolpert, 1997). Here we investigate motor simulation as a basis of human communication. Using a musical turn-taking task, we show that pianists call on motor representations of their partner's part to predict when to come in for their own turn. Pianists played alternating solos with a videoed partner, and double-pulse transcranial magnetic stimulation was applied around the turn-switch to temporarily disrupt processing in two cortical regions implicated previously in different forms of motor simulation: (1) the dorsal premotor cortex (dPMC), associated with automatic motor resonance during passive observation of hand actions, especially when the actions are familiar (Lahav et al., 2007); and (2) the supplementary motor area (SMA), involved in active motor imagery, especially when the actions are familiar (Baumann et al., 2007). Stimulation of the right dPMC decreased the temporal accuracy of pianists' (right-hand) entries relative to sham when the partner's (left-hand) part had been rehearsed previously. This effect did not occur for dPMC stimulation without rehearsal or for SMA stimulation. These findings support the role of the dPMC in predicting the time course of observed actions via resonance-based motor simulation during turn-taking. Because turn-taking spans multiple modes of human interaction, we suggest that simulation is a foundational mechanism underlying the temporal dynamics of joint action. Even during passive observation, seeing or hearing somebody execute an action from within our repertoire activates motor cortices of our brain. But what is the functional relevance of such "motor simulation"? By combining a musical duet task with a real

  18. Beta-and gamma-turns in proteins revisited: a new set of amino acid turn-type dependent positional preferences and potentials.

    Guruprasad, K; Rajkumar, S

    2000-06-01

    The number of beta-turns in a representative set of 426 protein three-dimensional crystal structures selected from the recent Protein Data Bank has nearly doubled and the number of gamma-turns in a representative set of 320 proteins has increased over seven times since the previous analysis. Beta-turns (7153) and gamma-turns (911) extracted from these proteins were used to derive a revised set of type-dependent amino acid positional preferences and potentials. Compared with previous results, the preference for proline, methionine and tryptophan has increased and the preference for glutamine, valine, glutamic acid and alanine has decreased for beta-turns. Certain new amino acid preferences were observed for both turn types and individual amino acids showed turn-type dependent positional preferences. The rationale for new amino acid preferences are discussed in the light of hydrogen bonds and other interactions involving the turns. Where main-chain hydrogen bonds of the type NH(i + 3) --> CO(i) were not observed for some beta-turns, other main-chain hydrogen bonds or solvent interactions were observed that possibly stabilize such beta-turns. A number of unexpected isolated beta-turns with proline at i + 2 position were also observed. The NH(i + 2) --> CO(i) hydrogen bond was observed for almost all gamma-turns. Nearly 20% classic gamma-turns and 43% inverse gamma-turns are isolated turns.

  19. Point defects in solids

    Anon.

    1978-01-01

    The principal properties of point defects are studied: thermodynamics, electronic structure, interactions with etended defects, production by irradiation. Some measuring methods are presented: atomic diffusion, spectroscopic methods, diffuse scattering of neutron and X rays, positron annihilation, molecular dynamics. Then points defects in various materials are investigated: ionic crystals, oxides, semiconductor materials, metals, intermetallic compounds, carbides, nitrides [fr

  20. Indexing Moving Points

    Agarwal, Pankaj K.; Arge, Lars Allan; Erickson, Jeff

    2003-01-01

    We propose three indexing schemes for storing a set S of N points in the plane, each moving along a linear trajectory, so that any query of the following form can be answered quickly: Given a rectangle R and a real value t, report all K points of S that lie inside R at time t. We first present an...

  1. Generalized zero point anomaly

    Nogueira, Jose Alexandre; Maia Junior, Adolfo

    1994-01-01

    It is defined Zero point Anomaly (ZPA) as the difference between the Effective Potential (EP) and the Zero point Energy (ZPE). It is shown, for a massive and interacting scalar field that, in very general conditions, the renormalized ZPA vanishes and then the renormalized EP and ZPE coincide. (author). 3 refs

  2. Poisson branching point processes

    Matsuo, K.; Teich, M.C.; Saleh, B.E.A.

    1984-01-01

    We investigate the statistical properties of a special branching point process. The initial process is assumed to be a homogeneous Poisson point process (HPP). The initiating events at each branching stage are carried forward to the following stage. In addition, each initiating event independently contributes a nonstationary Poisson point process (whose rate is a specified function) located at that point. The additional contributions from all points of a given stage constitute a doubly stochastic Poisson point process (DSPP) whose rate is a filtered version of the initiating point process at that stage. The process studied is a generalization of a Poisson branching process in which random time delays are permitted in the generation of events. Particular attention is given to the limit in which the number of branching stages is infinite while the average number of added events per event of the previous stage is infinitesimal. In the special case when the branching is instantaneous this limit of continuous branching corresponds to the well-known Yule--Furry process with an initial Poisson population. The Poisson branching point process provides a useful description for many problems in various scientific disciplines, such as the behavior of electron multipliers, neutron chain reactions, and cosmic ray showers

  3. The Lagrangian Points

    Linton, J. Oliver

    2017-01-01

    There are five unique points in a star/planet system where a satellite can be placed whose orbital period is equal to that of the planet. Simple methods for calculating the positions of these points, or at least justifying their existence, are developed.

  4. Publication point indicators

    Elleby, Anita; Ingwersen, Peter

    2010-01-01

    ; the Cumulated Publication Point Indicator (CPPI), which graphically illustrates the cumulated gain of obtained vs. ideal points, both seen as vectors; and the normalized Cumulated Publication Point Index (nCPPI) that represents the cumulated gain of publication success as index values, either graphically......The paper presents comparative analyses of two publication point systems, The Norwegian and the in-house system from the interdisciplinary Danish Institute of International Studies (DIIS), used as case in the study for publications published 2006, and compares central citation-based indicators...... with novel publication point indicators (PPIs) that are formalized and exemplified. Two diachronic citation windows are applied: 2006-07 and 2006-08. Web of Science (WoS) as well as Google Scholar (GS) are applied to observe the cite delay and citedness for the different document types published by DIIS...

  5. Multispectral Image Feature Points

    Cristhian Aguilera

    2012-09-01

    Full Text Available This paper presents a novel feature point descriptor for the multispectral image case: Far-Infrared and Visible Spectrum images. It allows matching interest points on images of the same scene but acquired in different spectral bands. Initially, points of interest are detected on both images through a SIFT-like based scale space representation. Then, these points are characterized using an Edge Oriented Histogram (EOH descriptor. Finally, points of interest from multispectral images are matched by finding nearest couples using the information from the descriptor. The provided experimental results and comparisons with similar methods show both the validity of the proposed approach as well as the improvements it offers with respect to the current state-of-the-art.

  6. Design of turn-around-point long-period gratings in a photonic crystal fiber for refractometry of gases

    Kaňka, Jiří

    2013-01-01

    Roč. 182, č. 6 (2013), s. 16-24 ISSN 0925-4005 R&D Projects: GA MŠk(CZ) LD11030; GA MŠk(CZ) LF11001 Institutional support: RVO:67985882 Keywords : Fiber design * Photonic crystal fiber * Microstructured optical fiber Subject RIV: BH - Optics, Masers, Lasers Impact factor: 3.840, year: 2013

  7. Collateral Damage and Critical Turning Points: Public Health Implications of HPV Vaccine News Coverage for Boys and Men in 2011.

    Krakow, Melinda; Rogers, Brian

    2016-09-01

    In 2009, the Food and Drug Administration (FDA) officially expanded approval of the Gardasil vaccine to include human papillomavirus (HPV) vaccination for boys and men, and in 2011, the Centers for Disease Control and Prevention (CDC) issued a formal recommendation for routine vaccination for this population. Despite these efforts, HPV vaccination rates for boys and men continue to fall short of public health targets. While news was breaking about the benefits of the HPV vaccine for boys and men, public attention shifted as a result of political debates concerning the vaccine. This study examines a pivotal time period for public health in which the vaccine became officially recommended for boys and men and at the same time became the center of political controversies in the lead-up to the 2012 presidential campaign. The current study extends previous research and presents a content analysis of newspaper articles (N = 154) about the HPV vaccine for the year 2011. Results indicate that the lack of comprehensive coverage of HPV and the HPV vaccine found in previous studies continued in this year. Results shed light on key political events that may have functioned to overshadow the recommendation of the HPV vaccine for boys and men. The implications of this pattern of news coverage can inform public health efforts to address low rates of HPV vaccination uptake among boys and men in present day.

  8. Progress and turning points in legal development of native forests protection at the argentine provincial and uruguayan jurisdictions

    Clara María Minaverry

    2017-04-01

    Full Text Available The general purpose of this paper is to investigate native forests protection regulatory development level, in a selection of argentine provinces in possession of valuable ecosystem forest´s resources, such as the Andean-Patagonian ones. The especial objectives are: To state if provincial regulations have complied with national native forests environmental protection law 26.331 (and if it regulates water resources, and to make a comparative analysis with Uruguay. This is an exploratory research, where analytical comparative method and legal hermeneutics were applied to this study. We could conclude that law 26.331 exceeded some of the selected argentine provincial regulations outlines, and that Uruguay does not have enough regulatory development in order to make an overall comparative analysis.

  9. Turning point of U.S. government decision in US-Japan nuclear fuel reprocessing negotiation in 1977

    Izumi, Yoshinori

    2010-01-01

    U.S. President Carter's Nuclear Nonproliferation Policy, announced in April 1977, which terminated federal funding for reprocessing, was a shock to the Atomic Energy Authority of the Japanese Government that had promoted the construction of Tokai Reprocessing Plant (TRP). After that, it became necessary to negotiate the 'Joint Determination for the Effective Safeguardability of TRP' subject to the 1968 Agreement for cooperation between the Government of Japan and the Government of the United States of America concerning civil use of Atomic Energy. Negotiations for the 'Joint Determination for the Effective Safguardability of TRP' were conducted in the U.S.-Japan Nuclear Fuel Reprocessing Negotiation and Joint Field Work meetings from April to September 1977. Both governments agreed to the TRP operation's terms and conditions including 'Joint Determination for the Effective Safeguardability of TRP' in the third negotiation. In spite of the hard position on reprocessing stated in the Nuclear Nonproliferation Policy enacted by President Carter, these negotiations concluded accepting the operation of TRP with condition. In this paper, I will explore the reasons for the abovementioned political decision by the U.S. government based on its disclosure documents. (author)

  10. Vanishing turning point. Piotr Chmielowski’s difficulties with periodization of the “recent Polish literature”

    Marek Wedeman

    2012-01-01

    Full Text Available [An outline of the literature of the last sixteen years] written by Piotr Chmielowski was designed in the author’s intention as a sketch of “rather journalistic than historical features”. The above is clearly indicated by the forewords written by the author to its successive four editions published between 1881 and 1898. Still, despite its lack of pretentions, the book acquired with time the status of a fully-fledged instructive approach to Polish literature of the Positivist period. A closer look at the text with regard to the proposed periodization reveals, however, a number of flaws and aporias committed by Chmielowski, particularly in establishing boundary dates of the proposed literary period. The present article attempts to prove that the source for the inaccuracies and inconsistencies of the solutions proposed in Zarys is not so much in their makeshift or the pro tem nature, but rather in the aggressively promoted ideology, represented by Chmielowski, that completely disregarded the nature of literary phenomena.

  11. One Team, One Fight, One Organizational Identity...Or Not: The United States Air Force at a Turning Point

    2014-06-01

    F-16s, B- 52s, and KC-135s, and for 13 months to Jerusalem and Tel Aviv, Israel, as Aide-de-Camp to the U.S. Security Coordinator for Israel and the...Department Leadership  Biographies , http://www.defense.gov/bios/ (accessed 18 Apr 2014)  70 Barnes outlines several of these recommendations and others in “A

  12. 2016 NOAA NGS Ortho-rectified Mean High Water Color Mosaic of St. Johns River at Mile Point Turn, Florida

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains ortho-rectified mosaic tiles, created as a product from the NOAA Integrated Ocean and Coastal Mapping (IOCM) initiative. The source imagery...

  13. Contemporary management of cleft lip and palate in the United Kingdom. Have we reached the turning point?

    Colbert, S D; Green, Ben; Brennan, P A; Mercer, N

    2015-09-01

    Babies born with clefts of the lip, and the alveolus or palate, or both, require multidisciplinary, highly specialised treatment from birth to early adulthood. We review the contemporary management of clefts and outline the current treatment protocol adopted by cleft networks in the United Kingdom. We also look at the level of evidence and the restructuring of services that has defined current practice. In light of the recent Cleft Care UK study, we ask whether it is now time to adopt a new philosophy towards the surgical techniques that are used. Copyright © 2015 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  14. Injured civilian survivors of suicide bomb attacks: from partial PTSD to recovery or to traumatisation. Where is the turning point?

    Dolberg, Ornah T; Barkai, Gabriel; Leor, Agnes; Rapoport, Helena; Bloch, Miki; Schreiber, Shaul

    2010-03-01

    To assess the short- (3-9 months) and medium-term (30 months) occurrence and severity of post-traumatic stress disorder (PTSD) in civilian survivors of suicide bombing terrorist attacks. We evaluated 129 injured survivors of nine attacks in Israel who were treated in our emergency room between June 2000 and September 2002. Data on demographics, physical injuries and psychiatric symptoms were collected by both a structured clinical interview and standard assessment scales for depression, anxiety, and sleep quality. Diagnosis of PTSD was based on a Hebrew-validated DSM-IV SCID-PTSD rating scale. At the first assessment (short-term), 20 survivors (15.5%) met the criteria for full-blown PTSD and 54 (42%) for sub-clinical PTSD, while 55 (42.5%) evidenced no symptoms of PTSD. Two years later, only 54 patients could be located: 19 (35%) of them had either persistent or de novo PTSD and none had residual sub-clinical PTSD. Relatively few survivors of suicide bomb attacks had full-blown PTSD, while a substantial number of survivors had short-term sub-clinical PTSD. Two-year follow-up evaluations revealed that a significant a number of the patients available for testing (35%) had full-blown PTSD. These findings imply that medium-term follow-up of survivors is needed in order to establish the actual prevalence of PTSD.

  15. EBTR design-point selection

    Krakowski, R.A.; Bathke, C.G.

    1981-01-01

    The procedure used to select the design point for the ELMO Bumpy Torus Reactor (EBTR) study is described. The models used in each phase of the selection process are described, with an emphasis placed on the parametric design curves produced by each model. The tradeoffs related to burn physics, stability/equilibrium, electron-ring physics, and magnetics design are discussed. The resulting design point indicates a plasma with a 35-m major radius and a 1-m minor radium operating at an average core-plasma beta of 0.17, which at approx. 30 keV produces an average neutron wall loading of 1.4 MW/m 2 while maintaining key magnet (< 10 T) and total power (less than or equal to 4000 MWt) constraints

  16. Modeling fixation locations using spatial point processes.

    Barthelmé, Simon; Trukenbrod, Hans; Engbert, Ralf; Wichmann, Felix

    2013-10-01

    Whenever eye movements are measured, a central part of the analysis has to do with where subjects fixate and why they fixated where they fixated. To a first approximation, a set of fixations can be viewed as a set of points in space; this implies that fixations are spatial data and that the analysis of fixation locations can be beneficially thought of as a spatial statistics problem. We argue that thinking of fixation locations as arising from point processes is a very fruitful framework for eye-movement data, helping turn qualitative questions into quantitative ones. We provide a tutorial introduction to some of the main ideas of the field of spatial statistics, focusing especially on spatial Poisson processes. We show how point processes help relate image properties to fixation locations. In particular we show how point processes naturally express the idea that image features' predictability for fixations may vary from one image to another. We review other methods of analysis used in the literature, show how they relate to point process theory, and argue that thinking in terms of point processes substantially extends the range of analyses that can be performed and clarify their interpretation.

  17. Major international sport profiles.

    Patel, Dilip R; Stier, Bernhard; Luckstead, Eugene F

    2002-08-01

    Sports are part of the sociocultural fabric of all countries. Although different sports have their origins in different countries, many sports are now played worldwide. International sporting events bring athletes of many cultures together and provide the opportunity not only for athletic competition but also for sociocultural exchange and understanding among people. This article reviews five major sports with international appeal and participation: cricket, martial arts, field hockey, soccer, and tennis. For each sport, the major aspects of physiological and biomechanical demands, injuries, and prevention strategies are reviewed.

  18. Do acupuncture points exist?

    Yan Xiaohui; Zhang Xinyi; Liu Chenglin; Dang, Ruishan; Huang Yuying; He Wei; Ding Guanghong

    2009-01-01

    We used synchrotron x-ray fluorescence analysis to probe the distribution of four chemical elements in and around acupuncture points, two located in the forearm and two in the lower leg. Three of the four acupuncture points showed significantly elevated concentrations of elements Ca, Fe, Cu and Zn in relation to levels in the surrounding tissue, with similar elevation ratios for Cu and Fe. The mapped distribution of these elements implies that each acupuncture point seems to be elliptical with the long axis along the meridian. (note)

  19. Do acupuncture points exist?

    Yan Xiaohui; Zhang Xinyi [Department of Physics, Surface Physics Laboratory (State Key Laboratory), and Synchrotron Radiation Research Center of Fudan University, Shanghai 200433 (China); Liu Chenglin [Physics Department of Yancheng Teachers' College, Yancheng 224002 (China); Dang, Ruishan [Second Military Medical University, Shanghai 200433 (China); Huang Yuying; He Wei [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100039 (China); Ding Guanghong [Shanghai Research Center of Acupuncture and Meridian, Pudong, Shanghai 201203 (China)

    2009-05-07

    We used synchrotron x-ray fluorescence analysis to probe the distribution of four chemical elements in and around acupuncture points, two located in the forearm and two in the lower leg. Three of the four acupuncture points showed significantly elevated concentrations of elements Ca, Fe, Cu and Zn in relation to levels in the surrounding tissue, with similar elevation ratios for Cu and Fe. The mapped distribution of these elements implies that each acupuncture point seems to be elliptical with the long axis along the meridian. (note)

  20. Major salivary glands

    Mancuso, A.A.

    1985-01-01

    This chapter deals with two important features of treatment of malignant tumors of the parotid and submandibular gland: the lack of a satisfactory means of staging these lesions, and the all-important treatment considerations relative to the facial nerve in parotid gland malignancies. The imaging physician and the clinician should also consider that many suspected parotid mass lesions turn out to arise from structures extrinsic to the gland. The authors discuss in detail the sources of such mass lesions as well as how CT can be used to differentiate these from intrinsic lesions in the parotid and submandibular glands. Computed tomography and, perhaps in the near future, magnetic resonance imaging (MRI) will provide us with a means to diagnose these tumors earlier. This is especially true when studies are used in situations such as unexplained peripheral seventh nerve paralysis or in the early screening of patients with parotid or periparotid masses. Unfortunately, it is usually patient delay that leads to late diagnosis of palpable mass lesions in this region, and there is little that any imaging study can do to reduce this factor

  1. Isochronous 180 degree turns for the SLC positron system

    Helm, R.H.; Clendenin, J.E.; Ecklund, S.D.; Kulikov, A.V.; Pitthan, R.

    1991-05-01

    The design of the compact, achromatic, second order isochronous 180 degrees turn for the SLC positron transport system will be described. Design criteria require an energy range of 200±20 MeV, energy acceptance of ±5%, transverse admittance of 25π mm-mr, and minimal lengthening of the 3 to 4 mm (rms) positron bunch. The devices had to fit within a maximum height or width of about 10 ft. Optics specifications and theoretical performance are presented and compared to experimental results based on streak camera measurements of bunch length immediately after the first isochronous turn (200 MeV) and positron beam energy spread after S-band acceleration to 1.15 GeV. 5 refs., 7 figs

  2. A Turn-Projected State-Based Conflict Resolution Algorithm

    Butler, Ricky W.; Lewis, Timothy A.

    2013-01-01

    State-based conflict detection and resolution (CD&R) algorithms detect conflicts and resolve them on the basis on current state information without the use of additional intent information from aircraft flight plans. Therefore, the prediction of the trajectory of aircraft is based solely upon the position and velocity vectors of the traffic aircraft. Most CD&R algorithms project the traffic state using only the current state vectors. However, the past state vectors can be used to make a better prediction of the future trajectory of the traffic aircraft. This paper explores the idea of using past state vectors to detect traffic turns and resolve conflicts caused by these turns using a non-linear projection of the traffic state. A new algorithm based on this idea is presented and validated using a fast-time simulator developed for this study.

  3. A proposed residual stress model for oblique turning

    Elkhabeery, M. M.

    2001-01-01

    A proposed mathematical model is presented for predicting the residual stresses caused by turning. Effects of change in tool free length, cutting speed, feed rate, and the tensile strength of work piece material on the maximum residual stress are investigated. The residual stress distribution in the surface region due to turning under unlubricated condition is determined using a deflection etching technique. To reduce the number of experiments required and build the mathematical model for these variables, Response Surface Methodology (RSM) is used. In addition, variance analysis and an experimental check are conducted to determine the prominent parameters and the adequacy of the model. The results show that the tensile stress of the work piece material, cutting speed, and feed rate have significant effects on the maximum residual stresses. The proposed model, that offering good correlation between the experimental and predicted results, is useful in selecting suitable cutting parameters for the machining of different materials. (author)

  4. Memory boosts turn taking in evolutionary dilemma games.

    Wang, Tao; Chen, Zhigang; Yang, Lei; Zou, You; Luo, Juan

    2015-05-01

    Spontaneous turn taking phenomenon can be observed in many self-organized systems, and the mechanism is unclear. This paper tries to model it by evolutionary dilemma games with memory mechanism. Prisoner's dilemma, Snowdrift (including Leader and Hero) and Stag-hunt games are unified on an extended S-T plane. Agents play game with all the others and make decision by the last game histories. The experiments find that when agents remember last 2-step histories or more, a kind of cooperative turn taking (CAD) bursts at the area of Snowdrift game with restriction of S + T > 2R and S ≠ T, while the consistent strategy (DorC) gathers on the line of S + T > 2R and S = T. We also find that the system's fitness ratio greatly improved with 2-step memory. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  5. Turn-key SRF accelerators to drive subcritical reactors

    Johnson, Rolland P.

    2011-01-01

    Large particle accelerator projects, both accomplished and proposed, have been used to engage US industry through contracts and grants to develop efficient capabilities to design, develop, produce, and deliver entire accelerator systems or any needed subsystems. Staffed in many cases by experienced scientists and engineers from National Laboratories and Universities, existing companies could extend their portfolios to offer turn-key accelerators with parameters to match the needs of ADS. If the reactors were based on molten salt fuel such that trip rate requirements were relaxed, the developments needed for a multi-MW proton accelerator for ADS would be minimal. Turn-key SRF proton linacs for ADS operation can be ordered now to enable GW-level power generation from natural thorium, natural uranium, or nuclear waste from conventional reactors. (author)

  6. Magnetostrictive actuator-based micropositioner and its application in turning

    Kanizar, William L.; Liu, Dongming; Moon, Kee S.; Sutherland, John W.

    1996-05-01

    The surface finish of a turned part is primarily generated from process parameters such as feed, tool geometry, and cutting speed. A micropositioner system utilizing a magnetostrictive material, Terfenol-D, as a linear motor is presented as a means to actively control the process. The system has an actuator clamped in a flexor that is rigid in the feed and main cutting force directions, yet is flexible in the radial direction. Using control algorithms implemented on a digital computer, the system can provide a means to compensate for deleterious vibrations. The system has also been used to manipulate the tool position in the radial direction so that non-circular turning can be accomplished.

  7. Morphing of Building Footprints Using a Turning Angle Function

    Jingzhong Li

    2017-06-01

    Full Text Available We study the problem of morphing two polygons of building footprints at two different scales. This problem frequently occurs during the continuous zooming of interactive maps. The ground plan of a building footprint on a map has orthogonal characteristics, but traditional morphing methods cannot preserve these geographic characteristics at intermediate scales. We attempt to address this issue by presenting a turning angle function-based morphing model (TAFBM that can generate polygons at an intermediate scale with an identical turning angle for each side. Thus, the orthogonal characteristics can be preserved during the entire interpolation. A case study demonstrates that the model yields good results when applied to data from a building map at various scales. During the continuous generalization, the orthogonal characteristics and their relationships with the spatial direction and topology are well preserved.

  8. Measurements of diamond-turned copper mirrors at glancing incidence

    Kimura, W.D.; Saito, T.T.

    1987-01-01

    The results of glancing incidence absorptance measurements performed on diamond-turned copper mirrors are presented. A photoacoustic calorimetry technique is used in which the output from a low power, chopped cw Nd:YAG laser (1.06 μm) is incident upon the mirror at angles of incidence from 0 to 87 0 , for both s and p-polarizations. Measurements are obtained as a function of the diamond turning groove orientation with respect to the plane of incidence. Minimum absorptance, at high angles of incidence, is achieved with s-polarized light and with the grooves aligned parallel to the plane of incidence. The affects on the absorptance of a large scratch at glancing incidence are also described

  9. Measurements of diamond turned copper mirrors at glancing incidence

    Kimura, W.D.; Saito, T.T.

    1987-01-01

    The results of glancing incidence absorptance measurements performed on diamond turned copper mirrors are presented. A photoacoustic calorimetry technique is used in which the output from a low power, chopped cw Nd:YAG laser (1.06 μm) is incident upon the mirror at angles of incidence from 0 to 87 0 , for both s and p-polarizations. Measurements are obtained as a function of the diamond turning groove orientation with respect to the plane of incidence. Minimum absorptance at high angles of incidence is achieved with s-polarized light and with the grooves aligned parallel to the plane of incidence. The effects on the absorptance of a large scratch at glancing incidence are also described

  10. Hilbert schemes of points and infinite dimensional Lie algebras

    Qin, Zhenbo

    2018-01-01

    Hilbert schemes, which parametrize subschemes in algebraic varieties, have been extensively studied in algebraic geometry for the last 50 years. The most interesting class of Hilbert schemes are schemes X^{[n]} of collections of n points (zero-dimensional subschemes) in a smooth algebraic surface X. Schemes X^{[n]} turn out to be closely related to many areas of mathematics, such as algebraic combinatorics, integrable systems, representation theory, and mathematical physics, among others. This book surveys recent developments of the theory of Hilbert schemes of points on complex surfaces and its interplay with infinite dimensional Lie algebras. It starts with the basics of Hilbert schemes of points and presents in detail an example of Hilbert schemes of points on the projective plane. Then the author turns to the study of cohomology of X^{[n]}, including the construction of the action of infinite dimensional Lie algebras on this cohomology, the ring structure of cohomology, equivariant cohomology of X^{[n]} a...

  11. Major New Initiatives

    First page Back Continue Last page Overview Graphics. Major New Initiatives. Multi-party multi-rate video conferencing OOPS. Live Lecture OOPS. Rural ATM Machine Vortex. Finger print detection HP-IITM. Medical Diagnostic kit NeuroSynaptic. LCD projection system TeNeT. Web Terminal MeTeL Midas. Entertainment ...

  12. Major planning enquiries

    Shore, P

    1978-11-01

    This is a speech delivered by the U.K. Secretary of State for the Environment in Manchester (UK) on September 13th 1978. It outlines the Minister's views on the role and significance of major planning inquiries - such as that proposed to be held on the Commercial Demonstration Fast Reactor. (CDFR) (author).

  13. Major Biomass Conference

    Top Scientists, Industry and Government Leaders to Gather for Major Biomass Conference America, South America and Europe will focus on building a sustainable, profitable biomass business at the Third Biomass Conference of the Americas in Montreal. Scheduled presentations will cover all biomass

  14. Unity in Major Themes

    Booss-Bavnbek, Bernhelm; Davis, Philip J.

    We describe and explain the desire, common among mathematicians, both for unity and independence in its major themes. In the dialogue that follows, we express our spontaneous and considered judgment and reservations; by contrasting the development of mathematics as a goal-driven process as opposed...

  15. Marine Point Forecasts

    will link to the zone forecast and then allow further zooming to the point of interest whereas on the Honolulu, HI Chicago, IL Northern Indiana, IN Lake Charles, LA New Orleans, LA Boston, MA Caribou, ME

  16. Critical-point nuclei

    Clark, R.M.

    2004-01-01

    It has been suggested that a change of nuclear shape may be described in terms of a phase transition and that specific nuclei may lie close to the critical point of the transition. Analytical descriptions of such critical-point nuclei have been introduced recently and they are described briefly. The results of extensive searches for possible examples of critical-point behavior are presented. Alternative pictures, such as describing bands in the candidate nuclei using simple ΔK = 0 and ΔK = 2 rotational-coupling models, are discussed, and the limitations of the different approaches highlighted. A possible critical-point description of the transition from a vibrational to rotational pairing phase is suggested

  17. National Wetlands Inventory Points

    Minnesota Department of Natural Resources — Wetland point features (typically wetlands that are too small to be as area features at the data scale) mapped as part of the National Wetlands Inventory (NWI). The...

  18. Allegheny County Address Points

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains address points which represent physical address locations assigned by the Allegheny County addressing authority. Data is updated by County...

  19. Iowa Geologic Sampling Points

    Iowa State University GIS Support and Research Facility — Point locations of geologic samples/files in the IGS repository. Types of samples include well cuttings, outcrop samples, cores, drillers logs, measured sections,...

  20. Effect of transmitter turn-off time on transient soundings

    Fitterman, D.V.; Anderson, W.L.

    1987-01-01

    A general procedure for computing the effect of non-zero turn-off time on the transient electromagnetic response is presented which can be applied to forward and inverse calculation methods for any transmitter-receiver configuration. We consider in detail the case of a large transmitter loop which has a receiver coil located at the center of the loop (central induction or in-loop array). For a linear turn-off ramp of width t0, the voltage response is shown to be the voltage due to an ideal step turn-off averaged over windows of width t0. Thus the effect is similar to that obtained by using averaging windows in the receiver. In general when time zero is taken to be the end of the ramp, the apparent resistivity increases for a homogeneous half-space over a limited time range. For time zero taken to be the start of the ramp the apparent resistivity is affected in the opposite direction. The effect of the ramp increases with increasing t0 and first-layer resistivity, is largest during the intermediate stage, and decreases with increasing time. It is shown that for a ramp turn-off, there is no effect in the early and late stages. For two-layered models with a resistive first layer (??1>??2), the apparent resistivity is increased in the intermediate stage. When the first layer is more conductive than the second layer (??1interpretation as shown by field examples; the influence is the greatest on near-surface layer parameters. ?? 1987.

  1. GA based CNC turning center exploitation process parameters optimization

    Z. Car

    2009-01-01

    Full Text Available This paper presents machining parameters (turning process optimization based on the use of artificial intelligence. To obtain greater efficiency and productivity of the machine tool, optimal cutting parameters have to be obtained. In order to find optimal cutting parameters, the genetic algorithm (GA has been used as an optimal solution finder. Optimization has to yield minimum machining time and minimum production cost, while considering technological and material constrains.

  2. Turning the tide : tidal power in the UK

    Sustainable Development Commission

    2007-01-01

    Contents: Turning the tide : tidal power in the UK -- Executive summary -- Tidal power in the UK : research report 1 : UK tidal resource assessment -- Tidal power in the UK : research report 2 : tidal technologies overview -- Tidal power in the UK : research report 3 : Severn barrage proposals -- Tidal power in the UK : research report 4 : Severn non-barrage options -- Tidal power in the UK : research report 5 : UK case studies. Summarised in the Welsh language version of the executive ...

  3. Analysis of the influence of tool dynamics in diamond turning

    Fawcett, S.C.; Luttrell, D.E.; Keltie, R.F.

    1988-12-01

    This report describes the progress in defining the role of machine and interface dynamics on the surface finish in diamond turning. It contains a review of literature from conventional and diamond machining processes relating tool dynamics, material interactions and tool wear to surface finish. Data from experimental measurements of tool/work piece interface dynamics are presented as well as machine dynamics for the DTM at the Center.

  4. Enhanced ultrasonically assisted turning of a β-titanium alloy.

    Maurotto, Agostino; Muhammad, Riaz; Roy, Anish; Silberschmidt, Vadim V

    2013-09-01

    Although titanium alloys have outstanding mechanical properties such as high hot hardness, a good strength-to-weight ratio and high corrosion resistance; their low thermal conductivity, high chemical affinity to tool materials severely impair their machinability. Ultrasonically assisted machining (UAM) is an advanced machining technique, which has been shown to improve machinability of a β-titanium alloy, namely, Ti-15-3-3-3, when compared to conventional turning processes. Copyright © 2013 Elsevier B.V. All rights reserved.

  5. Fuzzy Linguistic Optimization on Surface Roughness for CNC Turning

    Lan, Tian-Syung

    2010-01-01

    Surface roughness is often considered the main purpose in contemporary computer numerical controlled (CNC) machining industry. Most existing optimization researches for CNC finish turning were either accomplished within certain manufacturing circumstances or achieved through numerous equipment operations. Therefore, a general deduction optimization scheme is deemed to be necessary for the industry. In this paper, the cutting depth, feed rate, speed, and tool nose runoff with low, medium, and...

  6. Computational modeling of turn-taking dynamics in spoken conversations

    Chowdhury, Shammur Absar

    2017-01-01

    The study of human interaction dynamics has been at the center for multiple research disciplines in- cluding computer and social sciences, conversational analysis and psychology, for over decades. Recent interest has been shown with the aim of designing computational models to improve human-machine interaction system as well as support humans in their decision-making process. Turn-taking is one of the key aspects of conversational dynamics in dyadic conversations and is an integral part of hu...

  7. Characterizing fixed points

    Sanjo Zlobec

    2017-04-01

    Full Text Available A set of sufficient conditions which guarantee the existence of a point x⋆ such that f(x⋆ = x⋆ is called a "fixed point theorem". Many such theorems are named after well-known mathematicians and economists. Fixed point theorems are among most useful ones in applied mathematics, especially in economics and game theory. Particularly important theorem in these areas is Kakutani's fixed point theorem which ensures existence of fixed point for point-to-set mappings, e.g., [2, 3, 4]. John Nash developed and applied Kakutani's ideas to prove the existence of (what became known as "Nash equilibrium" for finite games with mixed strategies for any number of players. This work earned him a Nobel Prize in Economics that he shared with two mathematicians. Nash's life was dramatized in the movie "Beautiful Mind" in 2001. In this paper, we approach the system f(x = x differently. Instead of studying existence of its solutions our objective is to determine conditions which are both necessary and sufficient that an arbitrary point x⋆ is a fixed point, i.e., that it satisfies f(x⋆ = x⋆. The existence of solutions for continuous function f of the single variable is easy to establish using the Intermediate Value Theorem of Calculus. However, characterizing fixed points x⋆, i.e., providing answers to the question of finding both necessary and sufficient conditions for an arbitrary given x⋆ to satisfy f(x⋆ = x⋆, is not simple even for functions of the single variable. It is possible that constructive answers do not exist. Our objective is to find them. Our work may require some less familiar tools. One of these might be the "quadratic envelope characterization of zero-derivative point" recalled in the next section. The results are taken from the author's current research project "Studying the Essence of Fixed Points". They are believed to be original. The author has received several feedbacks on the preliminary report and on parts of the project

  8. Photoacoustic Point Source

    Calasso, Irio G.; Craig, Walter; Diebold, Gerald J.

    2001-01-01

    We investigate the photoacoustic effect generated by heat deposition at a point in space in an inviscid fluid. Delta-function and long Gaussian optical pulses are used as sources in the wave equation for the displacement potential to determine the fluid motion. The linear sound-generation mechanism gives bipolar photoacoustic waves, whereas the nonlinear mechanism produces asymmetric tripolar waves. The salient features of the photoacoustic point source are that rapid heat deposition and nonlinear thermal expansion dominate the production of ultrasound

  9. Unconventional Quantum Critical Points

    Xu, Cenke

    2012-01-01

    In this paper we review the theory of unconventional quantum critical points that are beyond the Landau's paradigm. Three types of unconventional quantum critical points will be discussed: (1). The transition between topological order and semiclassical spin ordered phase; (2). The transition between topological order and valence bond solid phase; (3). The direct second order transition between different competing orders. We focus on the field theory and universality class of these unconventio...

  10. SharePoint governance

    Ali, Mudassar

    2013-01-01

    Masteroppgave i informasjons- og kommunikasjonsteknologi IKT590 2013 – Universitetet i Agder, Grimstad SharePoint is a web-based business collaboration platform from Microsoft which is very robust and dynamic in nature. The platform has been in the market for more than a decade and has been adapted by large number of organisations in the world. The platform has become larger in scale, richer in features and is improving consistently with every new version. However, SharePoint ...

  11. Heading Estimation of Robot Combine Harvesters during Turning Maneuveres

    Md Mostafizar Rahman

    2018-05-01

    Full Text Available Absolute heading is an important parameter for a robot combine harvester or a robot tracked combine harvester, especially while it is turning, but due to the rapid turning of robot combine harvesters, its inertial measurement unit gives a gyro measurement bias that causes heading drift. Our research goal is to estimate the absolute heading of robot combine harvesters by compensating this gyro measurement bias during non-linear turning maneuvers. A sensor fusion method like the extended Kalman filter combined with the tracked combine harvester dynamic model and sensor measurements was used to estimate the absolute heading of a robot combine harvester. Circular, sinusoidal and concave shapes were used to evaluate the estimated heading produced by the sensor fusion method. The results indicate that the estimated heading is better than measured heading which was calculated from the integration of yaw rate gyro measurements, and the root mean square errors (RMSEs for estimated headings are smaller than the measured headings. In practics, the target of this paper is thus the estimation of a heading or absolute heading that is bias compensated, and can be further used to calculate the exact crop periphery for automatic path planning of robot combine harvesters.

  12. Heading Estimation of Robot Combine Harvesters during Turning Maneuveres.

    Rahman, Md Mostafizar; Ishii, Kazunobu

    2018-05-01

    Absolute heading is an important parameter for a robot combine harvester or a robot tracked combine harvester, especially while it is turning, but due to the rapid turning of robot combine harvesters, its inertial measurement unit gives a gyro measurement bias that causes heading drift. Our research goal is to estimate the absolute heading of robot combine harvesters by compensating this gyro measurement bias during non-linear turning maneuvers. A sensor fusion method like the extended Kalman filter combined with the tracked combine harvester dynamic model and sensor measurements was used to estimate the absolute heading of a robot combine harvester. Circular, sinusoidal and concave shapes were used to evaluate the estimated heading produced by the sensor fusion method. The results indicate that the estimated heading is better than measured heading which was calculated from the integration of yaw rate gyro measurements, and the root mean square errors (RMSEs) for estimated headings are smaller than the measured headings. In practics, the target of this paper is thus the estimation of a heading or absolute heading that is bias compensated, and can be further used to calculate the exact crop periphery for automatic path planning of robot combine harvesters.

  13. An oscillator model of the timing of turn-taking.

    Wilson, Margaret; Wilson, Thomas P

    2005-12-01

    When humans talk without conventionalized arrangements, they engage in conversation--that is, a continuous and largely nonsimultaneous exchange in which speakers take turns. Turn-taking is ubiquitous in conversation and is the normal case against which alternatives, such as interruptions, are treated as violations that warrant repair. Furthermore, turn-taking involves highly coordinated timing, including a cyclic rise and fall in the probability of initiating speech during brief silences, and involves the notable rarity, especially in two-party conversations, of two speakers' breaking a silence at once. These phenomena, reported by conversation analysts, have been neglected by cognitive psychologists, and to date there has been no adequate cognitive explanation. Here, we propose that, during conversation, endogenous oscillators in the brains of the speaker and the listeners become mutually entrained, on the basis of the speaker's rate of syllable production. This entrained cyclic pattern governs the potential for initiating speech at any given instant for the speaker and also for the listeners (as potential next speakers). Furthermore, the readiness functions of the listeners are counterphased with that of the speaker, minimizing the likelihood of simultaneous starts by a listener and the previous speaker. This mutual entrainment continues for a brief period when the speech stream ceases, accounting for the cyclic property of silences. This model not only captures the timing phenomena observed inthe literature on conversation analysis, but also converges with findings from the literatures on phoneme timing, syllable organization, and interpersonal coordination.

  14. Fuzzy Linguistic Optimization on Surface Roughness for CNC Turning

    Tian-Syung Lan

    2010-01-01

    Full Text Available Surface roughness is often considered the main purpose in contemporary computer numerical controlled (CNC machining industry. Most existing optimization researches for CNC finish turning were either accomplished within certain manufacturing circumstances or achieved through numerous equipment operations. Therefore, a general deduction optimization scheme is deemed to be necessary for the industry. In this paper, the cutting depth, feed rate, speed, and tool nose runoff with low, medium, and high level are considered to optimize the surface roughness for finish turning based on L9(34 orthogonal array. Additionally, nine fuzzy control rules using triangle membership function with respective to five linguistic grades for surface roughness are constructed. Considering four input and twenty output intervals, the defuzzification using center of gravity is then completed. Thus, the optimum general fuzzy linguistic parameters can then be received. The confirmation experiment result showed that the surface roughness from the fuzzy linguistic optimization parameters is significantly advanced compared to that from the benchmark. This paper certainly proposes a general optimization scheme using orthogonal array fuzzy linguistic approach to the surface roughness for CNC turning with profound insight.

  15. Development of the German network for transporting electricity: A major challenge for managers

    Feix, Olivier

    2013-01-01

    The catastrophe at the Japanese nuclear power plant in Fukushima has deeply altered Germany's energy policy. The news from Japan forced the federal government to step up its efforts so as to expand more quickly the share of renewable sources in the German energy mix and, on short notice, put an end to nuclear power. This Energiewende, as the Germans call it, is a major policy priority for the government and an outstanding project that mobilizes all of German society. This turning point in energy policy has entailed rewriting several laws so as to provide a legal framework for the transition. Most stakeholders expect that important amendments will be made to the texts directly related to production facilities. What is noticeable and even surprising is the scope of the changes in laws about electricity grids, in particular about managing and developing the network for transporting electricity

  16. Nanostructural Evolution of Hard Turning Layers in Carburized Steel

    Bedekar, Vikram

    The mechanisms of failure for components subjected to contact fatigue are sensitive to the structure and properties of the material surface. Although, the bulk material properties are determined by the steel making, forming and the heat treatment; the near surface material properties are altered during final material removal processes such as hard turning or grinding. Therefore, the ability to optimize, modulate and predict the near surface properties during final metal removal operations would be extremely useful in the enhancement of service life of a component. Hard machining is known to induce severely deformed layers causing dramatic microstructural transformations. These transformations occur via grain refinement or thermal phenomena depending upon cutting conditions. The aim of this work is to engineer the near surface nanoscale structure and properties during hard turning by altering strain, strain rate, temperature and incoming microstructure. The near surface material transformations due to hard turning were studied on carburized SAE 8620 bearing steel. Variations in parent material microstructures were introduced by altering the retained austenite content. The strain, strain rate and temperature achieved during final metal cutting were altered by varying insert geometry, insert wear and cutting speed. The subsurface evolution was quantified by a series of advanced characterization techniques such as transmission electron microscopy (TEM), glancing angle X-ray diffraction (GAXRD), X-ray stress evaluation and nanoindentation which were coupled with numerical modeling. Results showed that the grain size of the nanocrystalline near surface microstructure can be effectively controlled by altering the insert geometry, insert wear, cutting speed and the incoming microstructure. It was also evident that the near surface retained austenite decreased at lower cutting speed indicating transformation due to plastic deformation, while it increased at higher cutting

  17. Simulation of turn-by-turn passage of protons through the H-minus stripping foil in booster

    Gardner, C. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2017-07-06

    Equations for transverse emittance growth due to multiple passes of circulating proton beam through the H-minus stripping foil in Booster were developed in [1]. These were based on simple principles of statistics and simple assumptions about the initial distribution of particles incident on the foil. It was assumed there that the foil dimensions and position of the incoming beam are such that all particles hit the foil on every turn around the machine. In the present note we assume only that all incoming H-minus ions from Linac hit the foil and are stripped of their electrons. The resulting protons circulate indefinitely around the machine. Setups in which the foil width is reduced so that not all protons hit the foil on every turn are studied here by simulation. The aim is to determine the effectiveness of such setups in reducing the emittance growth of circulating proton beam during the injection of H-minus beam. The simulations also serve as a check of the equations developed in [1], and vice versa. The particulars of the simulation setup are given in Sections 1 through 11. Figures 1 through 12 show simulation results for the case in which all particles hit the foil on every turn. The results are in good agreement with those obtained from the equations of reference [1]. Figures 13 through 19 show simulation results for various setups in which the foil width is reduced. These results are summarized in Section 12. In all gures the horizontal axis gives the turn number. The unit of the vertical axis is micrometers ( m) in all plots of emittance.

  18. Medium dependent dual turn on/turn off fluorescence sensing for Cu2 + ions using AMI/SDS assemblies

    Gujar, Varsha B.; Ottoor, Divya

    2017-02-01

    Behavior of Amiloride (AMI) as a metal ion sensor in anionic surfactant assemblies of varying concentrations at different pH is depicted in this work. From a non-sensor fluorophore, AMI has been transformed in to a tunable fluorosensor for Cu2 + ions in various SDS concentrations. At premicellar concentration of SDS, ion-pair complex is expected to be formed between AMI and SDS due to electrostatic interactions between them. However at CMC concentrations of SDS, fluorescence intensity of AMI is greatly enhanced with red shift in emission, due to the incorporation of AMI molecule in the hydrophobic micellar interface. The behavior of metal sensing by AMI-SDS assemblies gives rise to several interesting observations. Micellation of SDS has been greatly enhanced by increasing copper ion concentrations, as these counter ions screens the charge on monomers of SDS which lead to the aggregation at premicellar concentrations only. Concentrations and pH dependent discrete trends of interactions between SDS-AMI and SDS-Cu2 + ions, have given tunable fluorescence responses (fluorescence turn on/turn off) of AMI for added Cu2 + ions. The electrostatic interaction between the metal cations and the anionic surfactants is the driving force for bringing the metal ions near to the vicinity of micelle where AMI resides. Thus, a comprehensive understanding of the mechanism related to the 'turn on-turn off' fluorescence response of AMI with respect to pH and SDS concentration for effective Cu2 + ion sensing is illustrated in this work.

  19. Expanding the peptide beta-turn in alphagamma hybrid sequences: 12 atom hydrogen bonded helical and hairpin turns.

    Chatterjee, Sunanda; Vasudev, Prema G; Raghothama, Srinivasarao; Ramakrishnan, Chandrasekharan; Shamala, Narayanaswamy; Balaram, Padmanabhan

    2009-04-29

    Hybrid peptide segments containing contiguous alpha and gamma amino acid residues can form C(12) hydrogen bonded turns which may be considered as backbone expanded analogues of C(10) (beta-turns) found in alphaalpha segments. Exploration of the regular hydrogen bonded conformations accessible for hybrid alphagamma sequences is facilitated by the use of a stereochemically constrained gamma amino acid residue gabapentin (1-aminomethylcyclohexaneacetic acid, Gpn), in which the two torsion angles about C(gamma)-C(beta) (theta(1)) and C(beta)-C(alpha) (theta(2)) are predominantly restricted to gauche conformations. The crystal structures of the octapeptides Boc-Gpn-Aib-Gpn-Aib-Gpn-Aib-Gpn-Aib-OMe (1) and Boc-Leu-Phe-Val-Aib-Gpn-Leu-Phe-Val-OMe (2) reveal two distinct conformations for the Aib-Gpn segment. Peptide 1 forms a continuous helix over the Aib(2)-Aib(6) segment, while the peptide 2 forms a beta-hairpin structure stabilized by four cross-strand hydrogen bonds with the Aib-Gpn segment forming a nonhelical C(12) turn. The robustness of the helix in peptide 1 in solution is demonstrated by NMR methods. Peptide 2 is conformationally fragile in solution with evidence of beta-hairpin conformations being obtained in methanol. Theoretical calculations permit delineation of the various C(12) hydrogen bonded structures which are energetically feasible in alphagamma and gammaalpha sequences.

  20. Predicting Undergraduate Music Education Majors' Collegiate Achievement

    Rohwer, Debbie

    2012-01-01

    In order for teachers to guide students in their preparation to be music majors, it would be useful to know those musical components that best predict overall collegiate success. The purpose of this study was to measure the relationship of predictor variables (Lessons, Music History, Music Theory, and Piano) to collegiate grade point average (GPA)…