WorldWideScience

Sample records for major software components

  1. Software component quality evaluation

    Clough, A. J.

    1991-01-01

    The paper describes a software inspection process that can be used to evaluate the quality of software components. Quality criteria, process application, independent testing of the process and proposed associated tool support are covered. Early results indicate that this technique is well suited for assessing software component quality in a standardized fashion. With automated machine assistance to facilitate both the evaluation and selection of software components, such a technique should promote effective reuse of software components.

  2. SBA Network Components & Software Inventory

    Small Business Administration — SBA’s Network Components & Software Inventory contains a complete inventory of all devices connected to SBA’s network including workstations, servers, routers,...

  3. Unblockable Compositions of Software Components

    Dong, Ruzhen; Faber, Johannes; Liu, Zhiming

    2012-01-01

    We present a new automata-based interface model describing the interaction behavior of software components. Contrary to earlier component- or interface-based approaches, the interface model we propose specifies all the non-blockable interaction behaviors of a component with any environment...... composition of interface models preserves unblockable sequences of provided services....

  4. Behavior Protocols for Software Components

    Plášil, František; Višňovský, Stanislav

    2002-01-01

    Roč. 28, č. 11 (2002), s. 1056-1076 ISSN 0098-5589 R&D Projects: GA AV ČR IAA2030902; GA ČR GA201/99/0244 Grant - others:Eureka(XE) Pepita project no.2033 Institutional research plan: AV0Z1030915 Keywords : behavior protocols * component-based programming * software architecture Subject RIV: JC - Computer Hardware ; Software Impact factor: 1.170, year: 2002

  5. Adaptation of Black-Box Software Components

    Rolf Andreas Rasenack

    2008-01-01

    Full Text Available The globalization of the software market leads to crucial problems for software companies. More competition between software companies arises and leads to the force on companies to develop ever newer software products in ever shortened time interval. Therefore the time to market for software systems is shortened and obviously the product life cycle is shortened too. Thus software companies shortened the time interval for research and development. Due to the fact of competition between software companies software products have to develop low-priced and this leads to a smaller return on investment. A big challenge for software companies is the use of an effective research and development process to have these problems under control. A way to control these problems can be the reuse of existing software components and adapt those software components to new functionality or accommodate mismatched interfaces. Complete redevelopment of software products is more expensive and time consuming than to develop software components. The approach introduced here presents novel technique together with a supportive environment that enables developers to cope with the adaptability of black-box software components. A supportive environment will be designed that checks the compatibility of black-box software components with the assistance of their specifications. Generated adapter software components can take over the part of adaptation and advance the functionality. Besides, a pool of software components can be used to compose an application to satisfy customer needs. Certainly this pool of software components consists of black-box software components and adapter software components which can be connected on demand.

  6. Analyser Framework to Verify Software Components

    Rolf Andreas Rasenack

    2009-01-01

    Full Text Available Today, it is important for software companies to build software systems in a short time-interval, to reduce costs and to have a good market position. Therefore well organized and systematic development approaches are required. Reusing software components, which are well tested, can be a good solution to develop software applications in effective manner. The reuse of software components is less expensive and less time consuming than a development from scratch. But it is dangerous to think that software components can be match together without any problems. Software components itself are well tested, of course, but even if they composed together problems occur. Most problems are based on interaction respectively communication. Avoiding such errors a framework has to be developed for analysing software components. That framework determines the compatibility of corresponding software components. The promising approach discussed here, presents a novel technique for analysing software components by applying an Abstract Syntax Language Tree (ASLT. A supportive environment will be designed that checks the compatibility of black-box software components. This article is concerned to the question how can be coupled software components verified by using an analyzer framework and determines the usage of the ASLT. Black-box Software Components and Abstract Syntax Language Tree are the basis for developing the proposed framework and are discussed here to provide the background knowledge. The practical implementation of this framework is discussed and shows the result by using a test environment.

  7. Model-integrating software components engineering flexible software systems

    Derakhshanmanesh, Mahdi

    2015-01-01

    In his study, Mahdi Derakhshanmanesh builds on the state of the art in modeling by proposing to integrate models into running software on the component-level without translating them to code. Such so-called model-integrating software exploits all advantages of models: models implicitly support a good separation of concerns, they are self-documenting and thus improve understandability and maintainability and in contrast to model-driven approaches there is no synchronization problem anymore between the models and the code generated from them. Using model-integrating components, software will be

  8. Verification of Software Components: Addressing Unbounded Paralelism

    Adámek, Jiří

    2007-01-01

    Roč. 8, č. 2 (2007), s. 300-309 ISSN 1525-9293 R&D Projects: GA AV ČR 1ET400300504 Institutional research plan: CEZ:AV0Z10300504 Keywords : software components * formal verification * unbounded parallelism Subject RIV: JC - Computer Hardware ; Software

  9. Software Component Certification: 10 Useful Distinctions

    Wallnau, Kurt C

    2004-01-01

    .... One persistent and largely unaddressed challenge is how the consumers of software components-that is, the developers of mission-critical systems-can obtain a meaningful level of trust in the runtime...

  10. A systematic approach for component-based software development

    Guareis de farias, Cléver; van Sinderen, Marten J.; Ferreira Pires, Luis

    2000-01-01

    Component-based software development enables the construction of software artefacts by assembling prefabricated, configurable and independently evolving building blocks, called software components. This paper presents an approach for the development of component-based software artefacts. This

  11. Runtime Concepts of Hierarchical Software Components

    Bureš, Tomáš; Hnětynka, P.; Plášil, František

    2007-01-01

    Roč. 8, special (2007), s. 454-463 ISSN 1525-9293 R&D Projects: GA AV ČR 1ET400300504 Institutional research plan: CEZ:AV0Z10300504 Keywords : component-based development * hierarchical components * connectors * controlers * runtime environment Subject RIV: JC - Computer Hardware ; Software

  12. Composing simulations using persistent software components

    Holland, J.V.; Michelsen, R.E.; Powell, D.R.; Upton, S.C.; Thompson, D.R.

    1999-03-01

    The traditional process for developing large-scale simulations is cumbersome, time consuming, costly, and in some cases, inadequate. The topics of software components and component-based software engineering are being explored by software professionals in academic and industrial settings. A component is a well-delineated, relatively independent, and replaceable part of a software system that performs a specific function. Many researchers have addressed the potential to derive a component-based approach to simulations in general, and a few have focused on military simulations in particular. In a component-based approach, functional or logical blocks of the simulation entities are represented as coherent collections of components satisfying explicitly defined interface requirements. A simulation is a top-level aggregate comprised of a collection of components that interact with each other in the context of a simulated environment. A component may represent a simulation artifact, an agent, or any entity that can generated events affecting itself, other simulated entities, or the state of the system. The component-based approach promotes code reuse, contributes to reducing time spent validating or verifying models, and promises to reduce the cost of development while still delivering tailored simulations specific to analysis questions. The Integrated Virtual Environment for Simulation (IVES) is a composition-centered framework to achieve this potential. IVES is a Java implementation of simulation composition concepts developed at Los Alamos National Laboratory for use in several application domains. In this paper, its use in the military domain is demonstrated via the simulation of dismounted infantry in an urban environment.

  13. A Combined Approach for Component-based Software Design

    Guareis de farias, Cléver; van Sinderen, Marten J.; Ferreira Pires, Luis; Quartel, Dick; Baldoni, R.

    2001-01-01

    Component-based software development enables the construction of software artefacts by assembling binary units of production, distribution and deployment, the so-called software components. Several approaches addressing component-based development have been proposed recently. Most of these

  14. Performance Engineering Technology for Scientific Component Software

    Malony, Allen D.

    2007-05-08

    Large-scale, complex scientific applications are beginning to benefit from the use of component software design methodology and technology for software development. Integral to the success of component-based applications is the ability to achieve high-performing code solutions through the use of performance engineering tools for both intra-component and inter-component analysis and optimization. Our work on this project aimed to develop performance engineering technology for scientific component software in association with the DOE CCTTSS SciDAC project (active during the contract period) and the broader Common Component Architecture (CCA) community. Our specific implementation objectives were to extend the TAU performance system and Program Database Toolkit (PDT) to support performance instrumentation, measurement, and analysis of CCA components and frameworks, and to develop performance measurement and monitoring infrastructure that could be integrated in CCA applications. These objectives have been met in the completion of all project milestones and in the transfer of the technology into the continuing CCA activities as part of the DOE TASCS SciDAC2 effort. In addition to these achievements, over the past three years, we have been an active member of the CCA Forum, attending all meetings and serving in several working groups, such as the CCA Toolkit working group, the CQoS working group, and the Tutorial working group. We have contributed significantly to CCA tutorials since SC'04, hosted two CCA meetings, participated in the annual ACTS workshops, and were co-authors on the recent CCA journal paper [24]. There are four main areas where our project has delivered results: component performance instrumentation and measurement, component performance modeling and optimization, performance database and data mining, and online performance monitoring. This final report outlines the achievements in these areas for the entire project period. The submitted progress

  15. Software Components and Formal Methods from a Computational Viewpoint

    Lambertz, Christian

    2012-01-01

    Software components and the methodology of component-based development offer a promising approach to master the design complexity of huge software products because they separate the concerns of software architecture from individual component behavior and allow for reusability of components. In combination with formal methods, the specification of a formal component model of the later software product or system allows for establishing and verifying important system properties in an automatic a...

  16. Combining two major ATLAS inner detector components

    Maximilien Brice

    2006-01-01

    The semiconductor tracker is inserted into the transition radiation tracker for the ATLAS experiment at the LHC. These make up two of the three major components of the inner detector. They will work together to measure the trajectories produced in the proton-proton collisions at the centre of the detector when the LHC is switched on in 2008.

  17. Gazing through Windows at component software development

    Foster, David

    1996-01-01

    What has been presented here is an overview of the architectural plan for distributed computing by Microsoft. The business opportunity is tied to the rapid growth of consumer computing which is happening now and will continue far into the future. Being able to create a logically centralized, through the use of interface standards, and physically distributed computing environment where anyone can provide services is major challenge. Managing complexity and creating a consistent framework through the use of componentware technology is paramount to its success. The ability to scale distributed processing, manage diverse groups involved in data analysis and facilitate collaboration at all levels are the business processes of particular interest to the HEP community. In realizing the business opportunity they see, Microsoft and others, will help solve many of the basic problems facing HEP in the next ten years. By closely tracking the software developments and investing in understanding the technologies presented here, HEP will gain great benefit from commodity computing. (author)

  18. Decision criteria for software component sourcing: steps towards a framework

    Kusters, R.J.; Pouwelse, L.; Martin, H.; Trienekens, J.J.M.; Hammoudi, Sl.; Maciaszek, L.; Missikoff, M.M.; Camp, O.; Cordeiro, J.

    2016-01-01

    Software developing organizations nowadays have a wide choice when it comes to sourcing software components. This choice ranges from developing or adapting in-house developed components via buying closed source components to utilizing open source components. This study seeks to determine criteria

  19. Component-based development of software language engineering tools

    Ssanyu, J.; Hemerik, C.

    2011-01-01

    In this paper we outline how Software Language Engineering (SLE) could benefit from Component-based Software Development (CBSD) techniques and present an architecture aimed at developing a coherent set of lightweight SLE components, fitting into a general-purpose component framework. In order to

  20. A Code Generator for Software Component Services in Smart Devices

    Ahmad, Manzoor

    2010-01-01

    A component is built to be reused and reusability has significant impact on component generality and flexibility requirement. A component model plays a critical role in reusability of software component and defines a set of standards for component implementation, evolution, composition, deployment and standardization of the run-time environment for execution of component. In component based development (CBD), standardization of the runtime environment includes specification of component’s int...

  1. System Risk Balancing Profiles: Software Component

    Kelly, John C.; Sigal, Burton C.; Gindorf, Tom

    2000-01-01

    The Software QA / V&V guide will be reviewed and updated based on feedback from NASA organizations and others with a vested interest in this area. Hardware, EEE Parts, Reliability, and Systems Safety are a sample of the future guides that will be developed. Cost Estimates, Lessons Learned, Probability of Failure and PACTS (Prevention, Avoidance, Control or Test) are needed to provide a more complete risk management strategy. This approach to risk management is designed to help balance the resources and program content for risk reduction for NASA's changing environment.

  2. A major genetic component of BSE susceptibility

    Juling, Katrin; Schwarzenbacher, Hermann; Williams, John L; Fries, Ruedi

    2006-01-01

    Background Coding variants of the prion protein gene (PRNP) have been shown to be major determinants for the susceptibility to transmitted prion diseases in humans, mice and sheep. However, to date, the effects of polymorphisms in the coding and regulatory regions of bovine PRNP on bovine spongiform encephalopathy (BSE) susceptibility have been considered marginal or non-existent. Here we analysed two insertion/deletion (indel) polymorphisms in the regulatory region of bovine PRNP in BSE affected animals and controls of four independent cattle populations from UK and Germany. Results In the present report, we show that two previously reported 23- and 12-bp insertion/deletion (indel) polymorphisms in the regulatory region of bovine PRNP are strongly associated with BSE incidence in cattle. Genotyping of BSE-affected and control animals of UK Holstein, German Holstein, German Brown and German Fleckvieh breeds revealed a significant overrepresentation of the deletion alleles at both polymorphic sites in diseased animals (P = 2.01 × 10-3 and P = 8.66 × 10-5, respectively). The main effect on susceptibility is associated with the 12-bp indel polymorphism. Compared with non-carriers, heterozygous and homozygous carriers of the 12-bp deletion allele possess relatively higher risks of having BSE, ranging from 1.32 to 4.01 and 1.74 to 3.65 in the different breeds. These values correspond to population attributable risks ranging from 35% to 53%. Conclusion Our results demonstrate a substantial genetic PRNP associated component for BSE susceptibility in cattle. Although the BSE risk conferred by the deletion allele of the 12-bp indel in the regulatory region of PRNP is substantial, the main risk factor for BSE in cattle is environmental, i.e. exposure to feedstuffs contaminated with the infectious agent. PMID:17014722

  3. A major genetic component of BSE susceptibility

    Williams John L

    2006-10-01

    Full Text Available Abstract Background Coding variants of the prion protein gene (PRNP have been shown to be major determinants for the susceptibility to transmitted prion diseases in humans, mice and sheep. However, to date, the effects of polymorphisms in the coding and regulatory regions of bovine PRNP on bovine spongiform encephalopathy (BSE susceptibility have been considered marginal or non-existent. Here we analysed two insertion/deletion (indel polymorphisms in the regulatory region of bovine PRNP in BSE affected animals and controls of four independent cattle populations from UK and Germany. Results In the present report, we show that two previously reported 23- and 12-bp insertion/deletion (indel polymorphisms in the regulatory region of bovine PRNP are strongly associated with BSE incidence in cattle. Genotyping of BSE-affected and control animals of UK Holstein, German Holstein, German Brown and German Fleckvieh breeds revealed a significant overrepresentation of the deletion alleles at both polymorphic sites in diseased animals (P = 2.01 × 10-3 and P = 8.66 × 10-5, respectively. The main effect on susceptibility is associated with the 12-bp indel polymorphism. Compared with non-carriers, heterozygous and homozygous carriers of the 12-bp deletion allele possess relatively higher risks of having BSE, ranging from 1.32 to 4.01 and 1.74 to 3.65 in the different breeds. These values correspond to population attributable risks ranging from 35% to 53%. Conclusion Our results demonstrate a substantial genetic PRNP associated component for BSE susceptibility in cattle. Although the BSE risk conferred by the deletion allele of the 12-bp indel in the regulatory region of PRNP is substantial, the main risk factor for BSE in cattle is environmental, i.e. exposure to feedstuffs contaminated with the infectious agent.

  4. Educational Technologies Based on Software Components

    Marian DARDALA

    2006-01-01

    Full Text Available Informatics technologies allow to easily develop and adapt e-learning systems. In order to be used by any users, the system must be developed to permit the lessons construction in a dynamic way. The component technology is a solution to this problem and offers the possibility to define the basic objects that will be connected at the run time to develop the personalized e-lessons.

  5. A Component-Oriented Programming for Embedded Mobile Robot Software

    Safaai Deris

    2008-11-01

    Full Text Available Applying software reuse to many Embedded Real-Time (ERT systems poses significant challenges to industrial software processes due to the resource-constrained and real-time requirements of the systems. Autonomous Mobile Robot (AMR system is a class of ERT systems, hence, inherits the challenge of applying software reuse in general ERT systems. Furthermore, software reuse in AMR systems is challenged by the diversities in terms of robot physical size and shape, environmental interaction and implementation platform. Thus, it is envisioned that component-based software engineering will be the suitable way to promote software reuse in AMR systems with consideration to general requirements to be self-contained, platform-independent and real-time predictable. A framework for component-oriented programming for AMR software development using PECOS component model is proposed in this paper. The main features of this framework are: (1 use graphical representation for components definition and composition; (2 target C language for optimal code generation with resource-constrained micro-controller; and (3 minimal requirement for run-time support. Real-time implementation indicates that, the PECOS component model together with the proposed framework is suitable for resource constrained embedded AMR systems software development.

  6. Software Atom: An approach towards software components structuring to improve reusability

    Muhammad Hussain Mughal

    2017-12-01

    Full Text Available Diversity of application domain compelled to design sustainable classification scheme for significantly amassing software repository. The atomic reusable software components are articulated to improve the software component reusability in volatile industry.  Numerous approaches of software classification have been proposed over past decades. Each approach has some limitations related to coupling and cohesion. In this paper, we proposed a novel approach by constituting the software based on radical functionalities to improve software reusability. We analyze the element's semantics in Periodic Table used in chemistry to design our classification approach, and present this approach using tree-based classification to curtail software repository search space complexity and further refined based on semantic search techniques. We developed a Global unique Identifier (GUID for indexing the functions and related components. We have exploited the correlation between chemistry element and software elements to simulate one to one mapping between them. Our approach is inspired from sustainability chemical periodic table. We have proposed software periodic table (SPT representing atomic software components extracted from real application software. Based on SPT classified repository tree parsing & extraction to enable the user to program their software by customizing the ingredients of software requirements. The classified repository of software ingredients assist user to exploits their requirements to software engineer and enable requirement engineer to develop a rapid large-scale prototype with great essence. Furthermore, we would predict the usability of the categorized repository based on feedback of users.  The continuous evolution of that proposed repository will be fine-tuned based on utilization and SPT would be gradually optimized by ant colony optimization techniques. Succinctly would provoke automating the software development process.

  7. Transactions in Software Components: Container-Interposed Transactions

    Procházka, M.; Plášil, František

    2002-01-01

    Roč. 3, č. 2 (2002), s. - ISSN 1525-9293 R&D Projects: GA ČR GA201/99/0244; GA AV ČR IAA2030902 Institutional research plan: AV0Z1030915 Keywords : transactions * component-based software architectures * transaction propagation policy * transaction attributes * container -interposed transactions Subject RIV: JC - Computer Hardware ; Software

  8. Component-Based Software Engineering and Runtime Type Definition

    A. R. Shakurov

    2011-01-01

    The component-based approach to software engineering, its current implementations and their limitations are discussed. A new extended architecture for such systems is presented. Its main architectural concepts and principles are considered.

  9. Mechanical components: fabrication of major reactor structures

    Nicholson, S.

    1985-01-01

    The paper examines the validity of criticisms of quality assurance of mechanical plant and welded products within major reactor structures, taking into account experience gained on the AGR's. Various constructive recommendations are made aimed at furthering the objectives of quality assurance in the nuclear industry and making it more cost-effective. Current levels of quality related costs in the fabrication industry are provided as a basis for discussion. (U.K.)

  10. Safety prediction for basic components of safety critical software based on static testing

    Son, H.S.; Seong, P.H.

    2001-01-01

    The purpose of this work is to develop a safety prediction method, with which we can predict the risk of software components based on static testing results at the early development stage. The predictive model combines the major factor with the quality factor for the components, both of which are calculated based on the measures proposed in this work. The application to a safety-critical software system demonstrates the feasibility of the safety prediction method. (authors)

  11. Safety prediction for basic components of safety-critical software based on static testing

    Son, H.S.; Seong, P.H.

    2000-01-01

    The purpose of this work is to develop a safety prediction method, with which we can predict the risk of software components based on static testing results at the early development stage. The predictive model combines the major factor with the quality factor for the components, which are calculated based on the measures proposed in this work. The application to a safety-critical software system demonstrates the feasibility of the safety prediction method. (authors)

  12. Integration of Simulink Models with Component-based Software Models

    MARIAN, N.

    2008-06-01

    Full Text Available Model based development aims to facilitate the development of embedded control systems by emphasizing the separation of the design level from the implementation level. Model based design involves the use of multiple models that represent different views of a system, having different semantics of abstract system descriptions. Usually, in mechatronics systems, design proceeds by iterating model construction, model analysis, and model transformation. Constructing a MATLAB/Simulink model, a plant and controller behavior is simulated using graphical blocks to represent mathematical and logical constructs and process flow, then software code is generated. A Simulink model is a representation of the design or implementation of a physical system that satisfies a set of requirements. A software component-based system aims to organize system architecture and behavior as a means of computation, communication and constraints, using computational blocks and aggregates for both discrete and continuous behavior, different interconnection and execution disciplines for event-based and time-based controllers, and so on, to encompass the demands to more functionality, at even lower prices, and with opposite constraints. COMDES (Component-based Design of Software for Distributed Embedded Systems is such a component-based system framework developed by the software engineering group of Mads Clausen Institute for Product Innovation (MCI, University of Southern Denmark. Once specified, the software model has to be analyzed. One way of doing that is to integrate in wrapper files the model back into Simulink S-functions, and use its extensive simulation features, thus allowing an early exploration of the possible design choices over multiple disciplines. The paper describes a safe translation of a restricted set of MATLAB/Simulink blocks to COMDES software components, both for continuous and discrete behavior, and the transformation of the software system into the S

  13. FY1995 study of very flexible software structures based on soft-software components; 1995 nendo yawarankana software buhin ni motozuku software no choju kozo ni kansuru kenkyu

    NONE

    1997-03-01

    The purpose of this study is to develop the method and tools for changing the software structure flexibly along with the continuous continuous change of its environment and conditions of use. The goal is the software of very high adaptability by using soft-software components and flexible assembly. The CASE tool platform Sapid based on a fine-grained repository was developed and enforced for raising the abstraction level of program code and for mining potential flexible components. To reconstruct the software adaptable to a required environment, the SQM (Software Quark Model) was used in managing interconnectivity and other semantic relationships of among components. On these two basic systems, we developed various methods and tools such as those for static and dynamic analysis of very flexible software structures, program transformation description, program pattern extraction and composition component optimization by partial evaluation, component extraction by function slicing, code encapsulation, and component navigation and application. (NEDO)

  14. Component-based software for high-performance scientific computing

    Alexeev, Yuri; Allan, Benjamin A; Armstrong, Robert C; Bernholdt, David E; Dahlgren, Tamara L; Gannon, Dennis; Janssen, Curtis L; Kenny, Joseph P; Krishnan, Manojkumar; Kohl, James A; Kumfert, Gary; McInnes, Lois Curfman; Nieplocha, Jarek; Parker, Steven G; Rasmussen, Craig; Windus, Theresa L

    2005-01-01

    Recent advances in both computational hardware and multidisciplinary science have given rise to an unprecedented level of complexity in scientific simulation software. This paper describes an ongoing grass roots effort aimed at addressing complexity in high-performance computing through the use of Component-Based Software Engineering (CBSE). Highlights of the benefits and accomplishments of the Common Component Architecture (CCA) Forum and SciDAC ISIC are given, followed by an illustrative example of how the CCA has been applied to drive scientific discovery in quantum chemistry. Thrusts for future research are also described briefly.

  15. Software, component, and service deployment in computational Grids

    von Laszewski, G.; Blau, E.; Bletzinger, M.; Gawor, J.; Lane, P.; Martin, S.; Russell, M.

    2002-01-01

    Grids comprise an infrastructure that enables scientists to use a diverse set of distributed remote services and resources as part of complex scientific problem-solving processes. We analyze some of the challenges involved in deploying software and components transparently in Grids. We report on three practical solutions used by the Globus Project. Lessons learned from this experience lead us to believe that it is necessary to support a variety of software and component deployment strategies. These strategies are based on the hosting environment

  16. Component-based software for high-performance scientific computing

    Alexeev, Yuri; Allan, Benjamin A; Armstrong, Robert C; Bernholdt, David E; Dahlgren, Tamara L; Gannon, Dennis; Janssen, Curtis L; Kenny, Joseph P; Krishnan, Manojkumar; Kohl, James A; Kumfert, Gary; McInnes, Lois Curfman; Nieplocha, Jarek; Parker, Steven G; Rasmussen, Craig; Windus, Theresa L

    2005-01-01

    Recent advances in both computational hardware and multidisciplinary science have given rise to an unprecedented level of complexity in scientific simulation software. This paper describes an ongoing grass roots effort aimed at addressing complexity in high-performance computing through the use of Component-Based Software Engineering (CBSE). Highlights of the benefits and accomplishments of the Common Component Architecture (CCA) Forum and SciDAC ISIC are given, followed by an illustrative example of how the CCA has been applied to drive scientific discovery in quantum chemistry. Thrusts for future research are also described briefly

  17. Integration of Simulink Models with Component-based Software Models

    Marian, Nicolae

    2008-01-01

    Model based development aims to facilitate the development of embedded control systems by emphasizing the separation of the design level from the implementation level. Model based design involves the use of multiple models that represent different views of a system, having different semantics...... of abstract system descriptions. Usually, in mechatronics systems, design proceeds by iterating model construction, model analysis, and model transformation. Constructing a MATLAB/Simulink model, a plant and controller behavior is simulated using graphical blocks to represent mathematical and logical...... constraints. COMDES (Component-based Design of Software for Distributed Embedded Systems) is such a component-based system framework developed by the software engineering group of Mads Clausen Institute for Product Innovation (MCI), University of Southern Denmark. Once specified, the software model has...

  18. Management of Globally Distributed Component-Based Software Development Projects

    J. Kotlarsky (Julia)

    2005-01-01

    textabstractGlobally Distributed Component-Based Development (GD CBD) is expected to become a promising area, as increasing numbers of companies are setting up software development in a globally distributed environment and at the same time are adopting CBD methodologies. Being an emerging area, the

  19. Monitoring extensions for component-based distributed software

    Diakov, N.K.; Papir, Z.; van Sinderen, Marten J.; Quartel, Dick

    2000-01-01

    This paper defines a generic class of monitoring extensions to component-based distributed enterprise software. Introducing a monitoring extension to a legacy application system can be very costly. In this paper, we identify the minimum support for application monitoring within the generic

  20. The Node Monitoring Component of a Scalable Systems Software Environment

    Miller, Samuel James [Iowa State Univ., Ames, IA (United States)

    2006-01-01

    This research describes Fountain, a suite of programs used to monitor the resources of a cluster. A cluster is a collection of individual computers that are connected via a high speed communication network. They are traditionally used by users who desire more resources, such as processing power and memory, than any single computer can provide. A common drawback to effectively utilizing such a large-scale system is the management infrastructure, which often does not often scale well as the system grows. Large-scale parallel systems provide new research challenges in the area of systems software, the programs or tools that manage the system from boot-up to running a parallel job. The approach presented in this thesis utilizes a collection of separate components that communicate with each other to achieve a common goal. While systems software comprises a broad array of components, this thesis focuses on the design choices for a node monitoring component. We will describe Fountain, an implementation of the Scalable Systems Software (SSS) node monitor specification. It is targeted at aggregate node monitoring for clusters, focusing on both scalability and fault tolerance as its design goals. It leverages widely used technologies such as XML and HTTP to present an interface to other components in the SSS environment.

  1. Center for Technology for Advanced Scientific Component Software (TASCS)

    Damevski, Kostadin [Virginia State Univ., Petersburg, VA (United States)

    2009-03-30

    A resounding success of the Scientific Discover through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedened computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS) tackles these issues by exploiting component-based software development to facilitate collaborative hig-performance scientific computing.

  2. Software components for medical image visualization and surgical planning

    Starreveld, Yves P.; Gobbi, David G.; Finnis, Kirk; Peters, Terence M.

    2001-05-01

    Purpose: The development of new applications in medical image visualization and surgical planning requires the completion of many common tasks such as image reading and re-sampling, segmentation, volume rendering, and surface display. Intra-operative use requires an interface to a tracking system and image registration, and the application requires basic, easy to understand user interface components. Rapid changes in computer and end-application hardware, as well as in operating systems and network environments make it desirable to have a hardware and operating system as an independent collection of reusable software components that can be assembled rapidly to prototype new applications. Methods: Using the OpenGL based Visualization Toolkit as a base, we have developed a set of components that implement the above mentioned tasks. The components are written in both C++ and Python, but all are accessible from Python, a byte compiled scripting language. The components have been used on the Red Hat Linux, Silicon Graphics Iris, Microsoft Windows, and Apple OS X platforms. Rigorous object-oriented software design methods have been applied to ensure hardware independence and a standard application programming interface (API). There are components to acquire, display, and register images from MRI, MRA, CT, Computed Rotational Angiography (CRA), Digital Subtraction Angiography (DSA), 2D and 3D ultrasound, video and physiological recordings. Interfaces to various tracking systems for intra-operative use have also been implemented. Results: The described components have been implemented and tested. To date they have been used to create image manipulation and viewing tools, a deep brain functional atlas, a 3D ultrasound acquisition and display platform, a prototype minimally invasive robotic coronary artery bypass graft planning system, a tracked neuro-endoscope guidance system and a frame-based stereotaxy neurosurgery planning tool. The frame-based stereotaxy module has been

  3. Use of NMR and NMR Prediction Software to Identify Components in Red Bull Energy Drinks

    Simpson, Andre J.; Shirzadi, Azadeh; Burrow, Timothy E.; Dicks, Andrew P.; Lefebvre, Brent; Corrin, Tricia

    2009-01-01

    A laboratory experiment designed as part of an upper-level undergraduate analytical chemistry course is described. Students investigate two popular soft drinks (Red Bull Energy Drink and sugar-free Red Bull Energy Drink) by NMR spectroscopy. With assistance of modern NMR prediction software they identify and quantify major components in each…

  4. Software Engineering Environment for Component-based Design of Embedded Software

    Guo, Yu

    2010-01-01

    as well as application models in a computer-aided software engineering environment. Furthermore, component models have been realized following carefully developed design patterns, which provide for an efficient and reusable implementation. The components have been ultimately implemented as prefabricated...... executable objects that can be linked together into an executable application. The development of embedded software using the COMDES framework is supported by the associated integrated engineering environment consisting of a number of tools, which support basic functionalities, such as system modelling......, validation, and executable code generation for specific hardware platforms. Developing such an environment and the associated tools is a highly complex engineering task. Therefore, this thesis has investigated key design issues and analysed existing platforms supporting model-driven software development...

  5. Integration of Simulink Models with Component-based Software Models

    Marian, Nicolae; Top, Søren

    2008-01-01

    , communication and constraints, using computational blocks and aggregates for both discrete and continuous behaviour, different interconnection and execution disciplines for event-based and time-based controllers, and so on, to encompass the demands to more functionality, at even lower prices, and with opposite...... to be analyzed. One way of doing that is to integrate in wrapper files the model back into Simulink S-functions, and use its extensive simulation features, thus allowing an early exploration of the possible design choices over multiple disciplines. The paper describes a safe translation of a restricted set...... of MATLAB/Simulink blocks to COMDES software components, both for continuous and discrete behaviour, and the transformation of the software system into the S-functions. The general aim of this work is the improvement of multi-disciplinary development of embedded systems with the focus on the relation...

  6. A Longitudinal Study of the e-Market for Software Components

    van Hillegersberg, Jos; Traas, Vincent; Dragt, Roland

    2001-01-01

    Component Based Software Development (CBD) holds high promises, but develops its full potential only when software components are traded in a component market. The Internet seems ideal for this purpose and various sources have predicted a bright future for the Internet Software Component Market

  7. 77 FR 35427 - Certain Mobile Devices, Associated Software, and Components Thereof Final Determination of...

    2012-06-13

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-744] Certain Mobile Devices, Associated... importation of certain mobile devices, associated software, and components thereof by reason of infringement... importation of certain mobile devices, associated software, and components thereof containing same by reason...

  8. Aging and life extension of major light water reactor components

    Shah, V.N.; MacDonald, P.E.

    1993-01-01

    An understanding of the aging degradation of the major pressurized and boiling water reactor structures and components is given. The design and fabrication of each structure or component is briefly described followed by information on the associated stressors. Interactions between the design, materials and various stressors that cause aging degradation are reviewed. In many cases, aging degradation problems have occurred, and the plant experience to date is analyzed. The discussion summarize the available aging-related information and are supported with extensive references, including references to US Nuclear Regulatory Commission (USNRC) documents, Electric Power Research Institute reports, US and international conference proceedings and other publications

  9. Development of E-learning Software Based Multiplatform Components

    Salamah, Irma; Ganiardi, M. Aris

    2017-01-01

    E-learning software is a product of information and communication technology used to help dynamic and flexible learning process between teacher and student. The software technology was first used in the development of e-learning software in the form of web applications. The advantages of this technology because of the ease in the development, installation, and distribution of data. Along with advances in mobile/wireless electronics technology, e-learning software is adapted to this technology...

  10. A major protein component of the Bacillus subtilis biofilm matrix.

    Branda, Steven S; Chu, Frances; Kearns, Daniel B; Losick, Richard; Kolter, Roberto

    2006-02-01

    Microbes construct structurally complex multicellular communities (biofilms) through production of an extracellular matrix. Here we present evidence from scanning electron microscopy showing that a wild strain of the Gram positive bacterium Bacillus subtilis builds such a matrix. Genetic, biochemical and cytological evidence indicates that the matrix is composed predominantly of a protein component, TasA, and an exopolysaccharide component. The absence of TasA or the exopolysaccharide resulted in a residual matrix, while the absence of both components led to complete failure to form complex multicellular communities. Extracellular complementation experiments revealed that a functional matrix can be assembled even when TasA and the exopolysaccharide are produced by different cells, reinforcing the view that the components contribute to matrix formation in an extracellular manner. Having defined the major components of the biofilm matrix and the control of their synthesis by the global regulator SinR, we present a working model for how B. subtilis switches between nomadic and sedentary lifestyles.

  11. Service oriented architecture assessment based on software components

    Mahnaz Amirpour

    2016-01-01

    Full Text Available Enterprise architecture, with detailed descriptions of the functions of information technology in the organization, tries to reduce the complexity of technology applications resulting in tools with greater efficiency in achieving the objectives of the organization. Enterprise architecture consists of a set of models describing this technology in different components performance as well as various aspects of the applications in any organization. Therefore, information technology development and maintenance management can perform well within organizations. This study aims to suggest a method to identify different types of services in service-oriented architecture analysis step that applies some previous approaches in an integrated form and, based on the principles of software engineering, to provide a simpler and more transparent approach through the expression of analysis details. Advantages and disadvantages of proposals should be evaluated before the implementation and costs allocation. Evaluation methods can better identify strengths and weaknesses of the current situation apart from selecting appropriate model out of several suggestions, and clarify this technology development solution for organizations in the future. We will be able to simulate data and processes flow within the organization by converting the output of the model to colored Petri nets and evaluate and test it by examining various inputs to enterprise architecture before implemented in terms of reliability and response time. A model of application has been studied for the proposed model and the results can describe and design architecture for data.

  12. LEGOS: Object-based software components for mission-critical systems. Final report, June 1, 1995--December 31, 1997

    NONE

    1998-08-01

    An estimated 85% of the installed base of software is a custom application with a production quantity of one. In practice, almost 100% of military software systems are custom software. Paradoxically, the marginal costs of producing additional units are near zero. So why hasn`t the software market, a market with high design costs and low productions costs evolved like other similar custom widget industries, such as automobiles and hardware chips? The military software industry seems immune to market pressures that have motivated a multilevel supply chain structure in other widget industries: design cost recovery, improve quality through specialization, and enable rapid assembly from purchased components. The primary goal of the ComponentWare Consortium (CWC) technology plan was to overcome barriers to building and deploying mission-critical information systems by using verified, reusable software components (Component Ware). The adoption of the ComponentWare infrastructure is predicated upon a critical mass of the leading platform vendors` inevitable adoption of adopting emerging, object-based, distributed computing frameworks--initially CORBA and COM/OLE. The long-range goal of this work is to build and deploy military systems from verified reusable architectures. The promise of component-based applications is to enable developers to snap together new applications by mixing and matching prefabricated software components. A key result of this effort is the concept of reusable software architectures. A second important contribution is the notion that a software architecture is something that can be captured in a formal language and reused across multiple applications. The formalization and reuse of software architectures provide major cost and schedule improvements. The Unified Modeling Language (UML) is fast becoming the industry standard for object-oriented analysis and design notation for object-based systems. However, the lack of a standard real-time distributed

  13. Aging management of major LWR components with nondestructive evaluation

    Shah, V.N.; MacDonald, P.E.; Akers, D.W.; Sellers, C.; Murty, K.L.; Miraglia, P.Q.; Mathew, M.D.; Haggag, F.M.

    1997-01-01

    Nondestructive evaluation of material damage can contribute to continued safe, reliable, and economical operation of nuclear power plants through their current and renewed license period. The aging mechanisms active in the major light water reactor components are radiation embrittlement, thermal aging, stress corrosion cracking, flow-accelerated corrosion, and fatigue, which reduce fracture toughness, structural strength, or fatigue resistance of the components and challenge structural integrity of the pressure boundary. This paper reviews four nondestructive evaluation methods with the potential for in situ assessment of damage caused by these mechanisms: stress-strain microprobe for determining mechanical properties of reactor pressure vessel and cast stainless materials, magnetic methods for estimating thermal aging damage in cast stainless steel, positron annihilation measurements for estimating early fatigue damage in reactor coolant system piping, and ultrasonic guided wave technique for detecting cracks and wall thinning in tubes and pipes and corrosion damage to embedded portion of metal containments

  14. A Hybrid Hardware and Software Component Architecture for Embedded System Design

    Marcondes, Hugo; Fröhlich, Antônio Augusto

    Embedded systems are increasing in complexity, while several metrics such as time-to-market, reliability, safety and performance should be considered during the design of such systems. A component-based design which enables the migration of its components between hardware and software can cope to achieve such metrics. To enable that, we define hybrid hardware and software components as a development artifact that can be deployed by different combinations of hardware and software elements. In this paper, we present an architecture for developing such components in order to construct a repository of components that can migrate between the hardware and software domains to meet the design system requirements.

  15. Constructing a working taxonomy of functional Ada software components for real-time embedded system applications

    Wallace, Robert

    1986-01-01

    A major impediment to a systematic attack on Ada software reusability is the lack of an effective taxonomy for software component functions. The scope of all possible applications of Ada software is considered too great to allow the practical development of a working taxonomy. Instead, for the purposes herein, the scope of Ada software application is limited to device and subsystem control in real-time embedded systems. A functional approach is taken in constructing the taxonomy tree for identified Ada domain. The use of modular software functions as a starting point fits well with the object oriented programming philosophy of Ada. Examples of the types of functions represented within the working taxonomy are real time kernels, interrupt service routines, synchronization and message passing, data conversion, digital filtering and signal conditioning, and device control. The constructed taxonomy is proposed as a framework from which a need analysis can be performed to reveal voids in current Ada real-time embedded programming efforts for Space Station.

  16. COTS-based OO-component approach for software inter-operability and reuse (software systems engineering methodology)

    Yin, J.; Oyaki, A.; Hwang, C.; Hung, C.

    2000-01-01

    The purpose of this research and study paper is to provide a summary description and results of rapid development accomplishments at NASA/JPL in the area of advanced distributed computing technology using a Commercial-Off--The-Shelf (COTS)-based object oriented component approach to open inter-operable software development and software reuse.

  17. A combined Component-Based Approach for the Design of Distributed Software Systems

    Guareis de farias, Cléver; Ferreira Pires, Luis; van Sinderen, Marten J.; Quartel, Dick; Yang, H.; Gupta, S.

    2001-01-01

    Component-based software development enables the construction of software artefacts by assembling binary units of production, distribution and deployment, the so-called components. Several approaches to component-based development have been proposed recently. Most of these approaches are based on

  18. In Search of the Philosopher's Stone: Simulation Composability Versus Component-Based Software Design

    Bartholet, Robert G; Brogan, David C; Reynolds, Jr., Paul F; Carnahan, Joseph C

    2004-01-01

    The simulation community and the software engineering community are actively conducting research on technology that will make it possible to easily build complex systems by combining existing components...

  19. Development and verification test of integral reactor major components

    Kim, J. I.; Kim, Y. W.; Kim, J. H. and others

    1999-03-01

    The conceptual designs for SG, MCP, CEDM to be installed in the integral reactor SMART were developed. Three-dimensional CAD models for the major components were developed to visualize the design concepts. Once-through helical steam generator was conceptually designed for SMART. Canned motor pump was adopted in the conceptual design of MCP. Linear pulse motor type and ballscrew type CEDM, which have fine control capabilities were studied for adoption in SMART. In parallel with the structural design, the electro-magnetic design was performed for the sizing motors and electro-magnet. Prototypes for the CEDM and MCP sub-assemblies were developed and tested to verify the performance. The impeller design procedure and the computer program to analyze the dynamic characteristics of MCP rotor shaft were developed. The design concepts of SG, MCP, CEDM were also invetigated for the fabricability.

  20. Development and verification test of integral reactor major components

    Kim, J. I.; Kim, Y. W.; Kim, J. H. and others

    1999-03-01

    The conceptual designs for SG, MCP, CEDM to be installed in the integral reactor SMART were developed. Three-dimensional CAD models for the major components were developed to visualize the design concepts. Once-through helical steam generator was conceptually designed for SMART. Canned motor pump was adopted in the conceptual design of MCP. Linear pulse motor type and ballscrew type CEDM, which have fine control capabilities were studied for adoption in SMART. In parallel with the structural design, the electro-magnetic design was performed for the sizing motors and electro-magnet. Prototypes for the CEDM and MCP sub-assemblies were developed and tested to verify the performance. The impeller design procedure and the computer program to analyze the dynamic characteristics of MCP rotor shaft were developed. The design concepts of SG, MCP, CEDM were also invetigated for the fabricability

  1. Major Components of the National TRU Waste System Optimization Project

    Moody, D.C.; Bennington, B.; Sharif, F.

    2002-01-01

    The National Transuranic (TRU) Program (NTP) is being optimized to allow for disposing of the legacy TRU waste at least 10 years earlier than originally planned. This acceleration will save the nation an estimated $713. The Department of Energy's (DOE'S) Carlsbad Field Office (CBFO) has initiated the National TRU Waste System Optimization Project to propose, and upon approvaI, implement activities that produce significant cost saving by improving efficiency, thereby accelerating the rate of TRU waste disposal without compromising safety. In its role as NTP agent of change, the National TRU Waste System Optimization Project (the Project) (1) interacts closely with all NTP activities. Three of the major components of the Project are the Central Characterization Project (CCP), the Central Confirmation Facility (CCF), and the MobiIe/Modular Deployment Program.

  2. Quercetin, not caffeine, is a major neuroprotective component in coffee.

    Lee, Moonhee; McGeer, Edith G; McGeer, Patrick L

    2016-10-01

    Epidemiologic studies indicate that coffee consumption reduces the risk of Parkinson's disease and Alzheimer's disease. To determine the factors involved, we examined the protective effects of coffee components. The test involved prevention of neurotoxicity to SH-SY5Y cells that was induced by lipopolysaccharide plus interferon-γ or interferon-γ released from activated microglia and astrocytes. We found that quercetin, flavones, chlorogenic acid, and caffeine protected SH-SY5Y cells from these toxins. They also reduced the release of tumor necrosis factor-α and interleukin-6 from the activated microglia and astrocytes and attenuated the activation of proteins from P38 mitogen-activated protein kinase (MAPK) and nuclear factor kappa light chain enhancer of activated B cells (NFκB). After exposure to toxin containing glial-stimulated conditioned medium, we also found that quercetin reduced oxidative/nitrative damage to DNA, as well as to the lipids and proteins of SH-SY5Y cells. There was a resultant increase in [GSH]i in SH-SY5Y cells. The data indicate that quercetin is the major neuroprotective component in coffee against Parkinson's disease and Alzheimer's disease. Copyright © 2016 Elsevier Inc. All rights reserved.

  3. Aging management of major light water reactor components

    Shah, V.N.; Sinha, U.P.; Ware, A.G.

    1992-01-01

    Review of technical literature and field experience has identified stress corrosion cracking as one of the major degradation mechanisms for the major light water reactor components. Three of the stress corrosion cracking mechanisms of current concern are (a) primary water stress corrosion cracking (PWSCC) in pressurized water reactors, and (b) intergranular stress corrosion cracking (IGSCC) and (c) irradiation-assisted stress corrosion cracking (IASCC) in boiling water reactors. Effective aging management of stress corrosion cracking mechanisms includes evaluation of interactions between design, materials, stressors, and environment; identification and ranking of susceptible sites; reliable inspection of any damage; assessment of damage rate; mitigation of damage; and repair and replacement using corrosion-resistant materials. Management of PWSCC includes use of lower operating temperatures, reduction in residual tensile stresses, development of reliable inspection techniques, and use of Alloy 690 as replacement material. Management of IGSCC of nozzle and attachment welds includes use of Alloy 82 as weld material, and potential use of hydrogen water chemistry. Management of IASCC also includes potential use of hydrogen water chemistry

  4. Application of fuzzy-MOORA method: Ranking of components for reliability estimation of component-based software systems

    Zeeshan Ali Siddiqui

    2016-01-01

    Full Text Available Component-based software system (CBSS development technique is an emerging discipline that promises to take software development into a new era. As hardware systems are presently being constructed from kits of parts, software systems may also be assembled from components. It is more reliable to reuse software than to create. It is the glue code and individual components reliability that contribute to the reliability of the overall system. Every component contributes to overall system reliability according to the number of times it is being used, some components are of critical usage, known as usage frequency of component. The usage frequency decides the weight of each component. According to their weights, each component contributes to the overall reliability of the system. Therefore, ranking of components may be obtained by analyzing their reliability impacts on overall application. In this paper, we propose the application of fuzzy multi-objective optimization on the basis of ratio analysis, Fuzzy-MOORA. The method helps us find the best suitable alternative, software component, from a set of available feasible alternatives named software components. It is an accurate and easy to understand tool for solving multi-criteria decision making problems that have imprecise and vague evaluation data. By the use of ratio analysis, the proposed method determines the most suitable alternative among all possible alternatives, and dimensionless measurement will realize the job of ranking of components for estimating CBSS reliability in a non-subjective way. Finally, three case studies are shown to illustrate the use of the proposed technique.

  5. A Study on Major Components of Bee Venom Using Electrophoresis

    Lee, Jin-Seon

    2000-12-01

    Full Text Available This study was designed to study on major components of various Bee Venom(Bee Venom by electrical stimulation in Korea; K-BV I, Bee Venom by Microwave stimulation in Korea; K -BV II, 0.5rng/ml, Fu Yu Pharmaceutical Factory, China; C-BV, 1mg /ml, Monmouth Pain Institute, Inc., U.S.A.; A-BV using Electrophoresis. The results were summarized as follows: 1. In 1:4000 Bee Venom solution rate, the band was not displayed distinctly usmg Electrophoresis. But in 1: 1000, the band showed clearly. 2. The results of Electrophoresis at solution rate 1:1000, K-BV I and K-BVII showed similar band. 3. The molecular weight of Phospholipase A2 was known as 19,000 but its band was seen at 17,000 in Electrophoresis. 4. Protein concentration of Bee Venom by Lowry method was different at solution rate 1:4000 ; C-BV was 250μg/ml, K-BV I was 190μg/ml, K-BV Ⅱ was 160μg/ml and C-BV was 45μg/ml. 5. Electrophoresis method was unuseful for analysis of Bee Venom when solution rate is above 1:4000 but Protein concentration of Bee Venom by Lowry method was possible. These data from the study can be applied to establish the standard measurement of Bee Venom and prevent pure bee venom from mixing of another components. I think it is desirable to study more about safety of Bee Venom as time goes by.

  6. 77 FR 16860 - Certain GPS Navigation Products, Components Thereof, and Related Software; Termination of...

    2012-03-22

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-783] Certain GPS Navigation Products, Components Thereof, and Related Software; Termination of Investigation on the Basis of Settlement AGENCY: U.S... GPS navigation products, components thereof, and related software, by reason of the infringement of...

  7. An Intuitionistic Fuzzy Methodology for Component-Based Software Reliability Optimization

    Madsen, Henrik; Grigore, Albeanu; Popenţiuvlǎdicescu, Florin

    2012-01-01

    Component-based software development is the current methodology facilitating agility in project management, software reuse in design and implementation, promoting quality and productivity, and increasing the reliability and performability. This paper illustrates the usage of intuitionistic fuzzy...... degree approach in modelling the quality of entities in imprecise software reliability computing in order to optimize management results. Intuitionistic fuzzy optimization algorithms are proposed to be used for complex software systems reliability optimization under various constraints....

  8. Final Report for 'Center for Technology for Advanced Scientific Component Software'

    Shasharina, Svetlana

    2010-01-01

    The goal of the Center for Technology for Advanced Scientific Component Software is to fundamentally changing the way scientific software is developed and used by bringing component-based software development technologies to high-performance scientific and engineering computing. The role of Tech-X work in TASCS project is to provide an outreach to accelerator physics and fusion applications by introducing TASCS tools into applications, testing tools in the applications and modifying the tools to be more usable.

  9. Software Component Clustering and Retrieval: An Entropy-based Fuzzy k-Modes Methodology

    Stylianou, Constantinos; Andreou, Andreas S.

    2008-01-01

    The number of software houses attempting to adopt a component-based development approach is rapidly increasing. However many organisations still find it difficult to complete the shift as it requires them to alter their entire software development process and philosophy. Furthermore, to promote component-based software engineering, organisations must be ready to promote reusability and this can only be attained if the proper framework exists from which a developer can access, search and retri...

  10. Major component analysis of dynamic networks of physiologic organ interactions

    Liu, Kang K L; Ma, Qianli D Y; Ivanov, Plamen Ch; Bartsch, Ronny P

    2015-01-01

    The human organism is a complex network of interconnected organ systems, where the behavior of one system affects the dynamics of other systems. Identifying and quantifying dynamical networks of diverse physiologic systems under varied conditions is a challenge due to the complexity in the output dynamics of the individual systems and the transient and nonlinear characteristics of their coupling. We introduce a novel computational method based on the concept of time delay stability and major component analysis to investigate how organ systems interact as a network to coordinate their functions. We analyze a large database of continuously recorded multi-channel physiologic signals from healthy young subjects during night-time sleep. We identify a network of dynamic interactions between key physiologic systems in the human organism. Further, we find that each physiologic state is characterized by a distinct network structure with different relative contribution from individual organ systems to the global network dynamics. Specifically, we observe a gradual decrease in the strength of coupling of heart and respiration to the rest of the network with transition from wake to deep sleep, and in contrast, an increased relative contribution to network dynamics from chin and leg muscle tone and eye movement, demonstrating a robust association between network topology and physiologic function. (paper)

  11. Correlation of major components of ocular astigmatism in myopic patients.

    Mohammadpour, Mehrdad; Heidari, Zahra; Khabazkhoob, Mehdi; Amouzegar, Afsaneh; Hashemi, Hassan

    2016-02-01

    To investigate the correlation of major components of ocular astigmatism in myopic patients in an academic hospital. This cross-sectional study was conducted on 376 eyes of 188 patients who were referred to Farabi Eye Hospital for refractive surgery. Preoperative examinations including refraction and corneal topography were performed for all candidates to measure refractive and corneal astigmatism. Ocular residual astigmatism was calculated using vector analysis. Pearson's correlation and ANOVA analysis were used to evaluate the strength of the association between different types of astigmatism. Both eyes were defined as cluster and the Generalized Estimating Equations (GEE) analysis were performed. Mean age of 119 women (63.3%) and 69 men (36.7%) was 27.8 ± 5.7 years. Mean refractive error based on spherical equivalent was -3.59 ± 1.95D (range, -0.54 to -10.22D). Mean refractive and corneal astigmatism was 1.97 ± 1.3D and 1.85 ± 1.01D, respectively. Mean amount of ORA was 0.65 ± 0.36D.There was a significant correlation between ORA and refractive astigmatism(r=0.23, pcorrelation between ORA and corneal astigmatism (r=0.13, p=0.014). There was a significant correlation between J0 and J45 values of ORA and corneal astigmatism (pcorrelation between ORA and refractive astigmatism, refractive and corneal astigmatism and a weak correlation between ORA and corneal astigmatism in refractive surgery candidates. Identifying the type of astigmatism and preoperative measurement of ocular residual astigmatism is highly recommended prior to any refractive surgery, especially in cases with significant astigmatism. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Cost estimation in software engineering projects with web components development

    Javier de Andrés

    2015-01-01

    Full Text Available Existen multitud de modelos propuestos para la predicción de co stes en proyectos de software, al gunos orientados específicamen te para proyectos Web. Este trabajo analiza si los modelos específicos para proyectos Web están justifi cados, examinando el comportami ento diferencial de los costes entre proyectos de desarrollo softwar e Web y no Web. Se analizan dos aspectos del cálculo de costes: las deseconomías de escala, y el im pacto de algunas características de estos proyectos que son utilizadas como cost drivers. Se en uncian dos hipótesis: (a en estos proyect os las deseconomías de escala so n mayores y (b el incremento de coste que provocan los cost dr ivers es menor para los proyectos Web. Se contrastaron estas hipótesis a nalizando un conjunto de proyectos reales. Los resultados sugie ren que ambas hipótesis se cumplen. Por lo tanto, la principal contribu ción a la literatura de esta inv estigación es que el desarrollo de modelos específicos para los proyectos Web está justificado.

  13. Developing Reusable and Reconfigurable Real-Time Software using Aspects and Components

    Tešanović, Aleksandra

    2006-01-01

    Our main focus in this thesis is on providing guidelines, methods, and tools for design, configuration, and analysis of configurable and reusable real-time software, developed using a combination of aspect-oriented and component-based software development. Specifically, we define a reconfigurable real-time component model (RTCOM) that describes how a real-time component, supporting aspects and enforcing information hiding, could efficiently be designed and implemented. In this context, we out...

  14. Design and development of major balance of plant components in solid oxide fuel cell system

    Hong, Wen-Tang; Huang, Cheng-Nan; Tan, Hsueh-I; Chao, Yu [Institute of Nuclear Energy Research Atomic Energy Council, Taoyuan County 32546 (Taiwan, Province of China); Yen, Tzu-Hsiang [Green Technology Research Institute, CPC Corporation, Chia-Yi City 60036 (Taiwan, Province of China)

    2013-07-01

    The balance of plant (BOP) of a Solid Oxide Fuel Cell (SOFC) system with a 2 kW stack and an electric efficiency of 40% is optimized using commercial GCTool software. The simulation results provide a detailed understanding of the optimal operating temperature, pressure and mass flow rate in all of the major BOP components, i.e., the gas distributor, the afterburner, the reformer and the heat exchanger. A series of experimental trials are performed to validate the simulation results. Overall, the results presented in this study not only indicate an appropriate set of operating conditions for the SOFC power system, but also suggest potential design improvements for several of the BOP components.

  15. Integrating environmental component models. Development of a software framework

    Schmitz, O.

    2014-01-01

    Integrated models consist of interacting component models that represent various natural and social systems. They are important tools to improve our understanding of environmental systems, to evaluate cause–effect relationships of human–natural interactions, and to forecast the behaviour of

  16. Development of the software for the component reliability database system of Korean nuclear power plants

    Han, Sang Hoon; Kim, Seung Hwan; Choi, Sun Young [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2002-03-01

    A study was performed to develop the system for the component reliability database which consists of database system to store the reliability data and softwares to analyze the reliability data.This system is a part of KIND (Korea Information System for Nuclear Reliability Database).The MS-SQL database is used to stores the component population data, component maintenance history, and the results of reliability analysis. Two softwares were developed for the component reliability system. One is the KIND-InfoView for the data storing, retrieving and searching. The other is the KIND-CompRel for the statistical analysis of component reliability. 4 refs., 13 figs., 7 tabs. (Author)

  17. Generation of components for software renovation factories from context-free grammars

    Brand, van den M.G.J.; Sellink, M.P.A.; Verhoef, C.

    2000-01-01

    We present an approach for the generation of components for a software renovation factory. These components are generated from a contex-free grammar definition that recognizes the code that has to be renovated. We generate analysis and transformation components that can be instantiated with a

  18. Proceedings International Workshop on Formal Engineering approaches to Software Components and Architectures

    Kofroň, Jan; Tumova, Jana

    2017-01-01

    These are the proceedings of the 14th International Workshop on Formal Engineering approaches to Software Components and Architectures (FESCA). The workshop was held on April 22, 2017 in Uppsala (Sweden) as a satellite event to the European Joint Conference on Theory and Practice of Software (ETAPS'17). The aim of the FESCA workshop is to bring together junior researchers from formal methods, software engineering, and industry interested in the development and application of formal modelling ...

  19. Proceedings 10th International Workshop on Formal Engineering Approaches to Software Components and Architectures

    Buhnova, Barbora; Happe, Lucia; Kofroň, Jan

    2013-01-01

    These are the proceedings of the 10th International Workshop on Formal Engineering approaches to Software Components and Architectures (FESCA). The workshop was held on March 23, 2013 in Rome (Italy) as a satellite event to the European Joint Conference on Theory and Practice of Software (ETAPS'13). The aim of the FESCA workshop is to bring together both young and senior researchers from formal methods, software engineering, and industry interested in the development and application of formal...

  20. SIMODIS - a software package for simulating nuclear reactor components

    Guimaraes, Lamartine; Borges, Eduardo M.

    2000-01-01

    In this paper it is presented the initial development effort in building a nuclear reactor component simulation package. This package was developed to be used in the MATLAB simulation environment. It uses the graphical capabilities from MATLAB and the advantages of compiled languages, as for instance FORTRAN and C ++ . From the MATLAB it takes the facilities for better displaying the calculated results. From the compiled languages it takes processing speed. So far models from reactor core, UTSG and OTSG have been developed. Also, a series a user-friendly graphical interfaces have been developed for the above models. As a by product a set of water and sodium thermal and physical properties have been developed and may be used directly as a function from MATLAB, or by being called from a model, as part of its calculation process. The whole set was named SIMODIS, which stands for SIstema MODular Integrado de Simulacao. (author)

  1. Specification and Generation of Environment for Model Checking of Software Components

    Pařízek, P.; Plášil, František

    2007-01-01

    Roč. 176, - (2007), s. 143-154 ISSN 1571-0661 R&D Projects: GA AV ČR 1ET400300504 Institutional research plan: CEZ:AV0Z10300504 Keywords : software components * behavior protocols * model checking * automated generation of environment Subject RIV: JC - Computer Hardware ; Software

  2. RAGE Reusable Game Software Components and Their Integration into Serious Game Engines

    Van der Vegt, Wim; Nyamsuren, Enkhbold; Westera, Wim

    2016-01-01

    This paper presents and validates a methodology for integrating reusable software components in diverse game engines. While conforming to the RAGE com-ponent-based architecture described elsewhere, the paper explains how the interac-tions and data exchange processes between a reusable software

  3. A model-based software development methodology for high-end automotive components

    Ravanan, Mahmoud

    2014-01-01

    This report provides a model-based software development methodology for high-end automotive components. The V-model is used as a process model throughout the development of the software platform. It offers a framework that simplifies the relation between requirements, design, implementation,

  4. Development of geophysical and geochemical data processing software based on component GIS

    Ke Dan; Yu Xiang; Wu Qubo; Han Shaoyang; Li Xi

    2013-01-01

    Based on component GIS and mixed programming techniques, a software which combines the basic GIS functions, conventional and unconventional data process methods for the regional geophysical and geochemical data together, is designed and developed. The software has many advantages, such as friendly interface, easy to use and utility functions and provides a useful platform for regional geophysical and geochemical data processing. (authors)

  5. Leveraging Existing Mission Tools in a Re-Usable, Component-Based Software Environment

    Greene, Kevin; Grenander, Sven; Kurien, James; z,s (fshir. z[orttr); z,scer; O'Reilly, Taifun

    2006-01-01

    Emerging methods in component-based software development offer significant advantages but may seem incompatible with existing mission operations applications. In this paper we relate our positive experiences integrating existing mission applications into component-based tools we are delivering to three missions. In most operations environments, a number of software applications have been integrated together to form the mission operations software. In contrast, with component-based software development chunks of related functionality and data structures, referred to as components, can be individually delivered, integrated and re-used. With the advent of powerful tools for managing component-based development, complex software systems can potentially see significant benefits in ease of integration, testability and reusability from these techniques. These benefits motivate us to ask how component-based development techniques can be relevant in a mission operations environment, where there is significant investment in software tools that are not component-based and may not be written in languages for which component-based tools even exist. Trusted and complex software tools for sequencing, validation, navigation, and other vital functions cannot simply be re-written or abandoned in order to gain the advantages offered by emerging component-based software techniques. Thus some middle ground must be found. We have faced exactly this issue, and have found several solutions. Ensemble is an open platform for development, integration, and deployment of mission operations software that we are developing. Ensemble itself is an extension of an open source, component-based software development platform called Eclipse. Due to the advantages of component-based development, we have been able to vary rapidly develop mission operations tools for three surface missions by mixing and matching from a common set of mission operation components. We have also had to determine how to

  6. 78 FR 32690 - Certain Gaming and Entertainment Consoles, Related Software, and Components Thereof; Notice of...

    2013-05-31

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-752] Certain Gaming and Entertainment... importation of certain gaming and entertainment consoles, related software, and components thereof by reason... violation of [[Page 32691

  7. Uniframe: A Unified Framework for Developing Service-Oriented, Component-Based Distributed Software Systems

    Raje, Rajeev R; Olson, Andrew M; Bryant, Barrett R; Burt, Carol C; Auguston, Makhail

    2005-01-01

    .... It describes how this approach employs a unifying framework for specifying such systems to unite the concepts of service-oriented architectures, a component-based software engineering methodology...

  8. A Component-based Software Development and Execution Framework for CAx Applications

    N. Matsuki

    2004-01-01

    Full Text Available Digitalization of the manufacturing process and technologies is regarded as the key to increased competitive ability. The MZ-Platform infrastructure is a component-based software development framework, designed for supporting enterprises to enhance digitalized technologies using software tools and CAx components in a self-innovative way. In the paper we show the algorithm, system architecture, and a CAx application example on MZ-Platform. We also propose a new parametric data structure based on MZ-Platform.

  9. Manufacturing and testing experience for FFTF major safety related components

    Peckinpaugh, C.L.

    1976-01-01

    Experience with FFTF Heat Transport System components during design, manufacturing, and prototype testing is dscussed. Specifically the special design features and the results of the testing performed to assure that the designs provide for safe operation are outlined. Particular emphasis is placed on the full size prototype testing programs and the valuable experience gained

  10. DOOCS patterns, reusable software components for FPGA based RF GUN field controller

    Pucyk, P.

    2006-01-01

    Modern accelerator technology combines software and hardware solutions to provide distributed, high efficiency digital systems for High Energy Physics experiments. Providing flexible, maintainable software is crucial for ensuring high availability of the whole system. In order to fulfil all these requirements, appropriate design and development techniques have to be used. Software patterns are well known solution for common programming issues, providing proven development paradigms, which can help to avoid many design issues. DOOCS patterns introduces new concepts of reusable software components for control system algorithms development and implementation in DOOCS framework. Chosen patterns have been described and usage examples have been presented in this paper. (orig.)

  11. DOOCS patterns, reusable software components for FPGA based RF GUN field controller

    Pucyk, P. [Institute of Electronic Systems, Warsaw (Poland)

    2006-07-01

    Modern accelerator technology combines software and hardware solutions to provide distributed, high efficiency digital systems for High Energy Physics experiments. Providing flexible, maintainable software is crucial for ensuring high availability of the whole system. In order to fulfil all these requirements, appropriate design and development techniques have to be used. Software patterns are well known solution for common programming issues, providing proven development paradigms, which can help to avoid many design issues. DOOCS patterns introduces new concepts of reusable software components for control system algorithms development and implementation in DOOCS framework. Chosen patterns have been described and usage examples have been presented in this paper. (orig.)

  12. A CORBA BASED ARCHITECTURE FOR ACCESSING REUSABLE SOFTWARE COMPONENTS ON THE WEB.

    R. Cenk ERDUR

    2003-01-01

    Full Text Available In a very near future, as a result of the continious growth of Internet and advances in networking technologies, Internet will become the common software repository for people and organizations who employ component based reuse approach in their software development life cycles. In order to use the reusable components such as source codes, analysis, designs, design patterns during new software development processes, environments that support the identification of the components over Internet are needed. Basic elements of such an environment are the coordinator programs which deliver user requests to appropriate component libraries, user interfaces for querying, and programs that wrap the component libraries. First, a CORBA based architecture is proposed for such an environment. Then, an alternative architecture that is based on the Java 2 platform technologies is given for the same environment. Finally, the two architectures are compared.

  13. The ATLAS online High Level Trigger framework experience reusing offline software components in the ATLAS trigger

    Wiedenmann, W

    2009-01-01

    Event selection in the Atlas High Level Trigger is accomplished to a large extent by reusing software components and event selection algorithms developed and tested in an offline environment. Many of these offline software modules are not specifically designed to run in a heavily multi-threaded online data flow environment. The Atlas High Level Trigger (HLT) framework based on the Gaudi and Atlas Athena frameworks, forms the interface layer, which allows the execution of the HLT selection and monitoring code within the online run control and data flow software. While such an approach provides a unified environment for trigger event selection across all of Atlas, it also poses strict requirements on the reused software components in terms of performance, memory usage and stability. Experience of running the HLT selection software in the different environments and especially on large multi-node trigger farms has been gained in several commissioning periods using preloaded Monte Carlo events, in data taking peri...

  14. Using MDA for integration of heterogeneous components in software supply chains

    Hartmann, Johan Herman; Keren, Mila; Matsinger, Aart; Rubin, Julia; Trew, Tim; Yatzkar-Haham, Tali

    2013-01-01

    Software product lines are increasingly built using components from specialized suppliers. A company that is in the middle of a supply chain has to integrate components from its suppliers and offer (partially configured) products to its customers. To satisfy both the variability required by each

  15. Major components in oils obtained from Amazonian palm fruits

    Santos, M. F. G.

    2013-06-01

    Full Text Available Native palm trees belong to the Arecaceae family and are among the most useful plant resources in the Amazons. Despite its great diversity and various uses, few species have been study in detail, which makes it necessary to perform more comprehensive studies on the quality and composition of species not yet explored. This study deals with the characterization of the major compounds in the oils obtained from the mesocarp of fruits of the main palm species from the State of Amapá, Brasil, i.e. bacaba (Oenocarpus bacaba, buriti (Mauritia flexuosa, inajá (Maximiliana maripa, pupunha (Bactris gasipaes and tucumã (Astrocaryum vulgare. Physicochemical characteristics, fatty acids and triacylglycerol (TAG contents were analyzed by HPLC and GC. The proximate composition of the fruits was also analyzed. The results relating to acidity, peroxide value and polar compounds indicate good quality of the oils obtained. Oleic acid ranging from 39.2 to 71.6% and palmitic acid ranging from 20.8 to 39.6% were the two major fatty acids in all the samples. The oils from inajá were characterized by the presence of significant amounts of lauric (4.6% and miristic (10.7% acids while in bacaba, buriti, pupunha and tucumã, as in most edible vegetable oils, only the fatty acids of 16 and 18 carbon atoms were present. Accordingly, the major TAG species in all the samples were POP, POO and OOO. The mesocarp of the palm fruit had a high content in lipids ranging from 17.0% for pupunha to 38.3% for bacaba, expressed as dry basis.Las palmeras nativas de la familia Arecaceae constituyen recursos alimentarios de gran importancia en la región amazónica. A pesar de su diversidad y utilidad, muchas especies son poco conocidas por lo que son de interés los estudios dirigidos a conocer la calidad y composición de las especies menos exploradas para evaluar su potencial económico. El objetivo de este estudio fue la caracterización de los aceites obtenidos del mesocarpio

  16. Assume-Guarantee Verification of Software Components in SOFA 2 Framework

    Parízek, P.; Plášil, František

    2010-01-01

    Roč. 4, č. 3 (2010), s. 210-221 ISSN 1751-8806 R&D Projects: GA AV ČR 1ET400300504 Grant - others:GA MŠk(CZ) 7E08004 Institutional research plan: CEZ:AV0Z10300504 Keywords : components * software verification * model checking Subject RIV: JC - Computer Hardware ; Software Impact factor: 0.671, year: 2010

  17. The ATLAS online High Level Trigger framework: Experience reusing offline software components in the ATLAS trigger

    Wiedenmann, Werner

    2010-01-01

    Event selection in the ATLAS High Level Trigger is accomplished to a large extent by reusing software components and event selection algorithms developed and tested in an offline environment. Many of these offline software modules are not specifically designed to run in a heavily multi-threaded online data flow environment. The ATLAS High Level Trigger (HLT) framework based on the GAUDI and ATLAS ATHENA frameworks, forms the interface layer, which allows the execution of the HLT selection and monitoring code within the online run control and data flow software. While such an approach provides a unified environment for trigger event selection across all of ATLAS, it also poses strict requirements on the reused software components in terms of performance, memory usage and stability. Experience of running the HLT selection software in the different environments and especially on large multi-node trigger farms has been gained in several commissioning periods using preloaded Monte Carlo events, in data taking periods with cosmic events and in a short period with proton beams from LHC. The contribution discusses the architectural aspects of the HLT framework, its performance and its software environment within the ATLAS computing, trigger and data flow projects. Emphasis is also put on the architectural implications for the software by the use of multi-core processors in the computing farms and the experiences gained with multi-threading and multi-process technologies.

  18. 41 CFR 102-85.40 - What are the major components of the pricing policy?

    2010-07-01

    ... components of the pricing policy? 102-85.40 Section 102-85.40 Public Contracts and Property Management...-PRICING POLICY FOR OCCUPANCY IN GSA SPACE Pricing Policy-General § 102-85.40 What are the major components of the pricing policy? The major components of the pricing policy are: (a) An OA between a customer...

  19. Towards a Complete Model for Software Component Deployment on Heterogeneous Platform

    Švogor Ivan

    2014-12-01

    Full Text Available This report briefly describes an ongoing research related to optimization of allocating software components to heterogeneous computing platform (which includes CPU, GPU and FPGA. Research goal is also presented, along with current hot topics of the research area, related research teams, and finally results and contribution of my research. It involves mathematical modelling which results in goal function, optimization method which finds a suboptimal solution to the goal function and a software modeling tool which enables graphical representation of the problem at hand and help developers determine component placement in the system design phase.

  20. Characterizing and Modeling the Cost of Rework in a Library of Reusable Software Components

    Basili, Victor R.; Condon, Steven E.; ElEmam, Khaled; Hendrick, Robert B.; Melo, Walcelio

    1997-01-01

    In this paper we characterize and model the cost of rework in a Component Factory (CF) organization. A CF is responsible for developing and packaging reusable software components. Data was collected on corrective maintenance activities for the Generalized Support Software reuse asset library located at the Flight Dynamics Division of NASA's GSFC. We then constructed a predictive model of the cost of rework using the C4.5 system for generating a logical classification model. The predictor variables for the model are measures of internal software product attributes. The model demonstrates good prediction accuracy, and can be used by managers to allocate resources for corrective maintenance activities. Furthermore, we used the model to generate proscriptive coding guidelines to improve programming, practices so that the cost of rework can be reduced in the future. The general approach we have used is applicable to other environments.

  1. Servicing HEP experiments with a complete set of ready integreated and configured common software components

    Roiser, Stefan; Gaspar, Ana; Perrin, Yves; Kruzelecki, Karol

    2010-01-01

    The LCG Applications Area at CERN provides basic software components for the LHC experiments such as ROOT, POOL, COOL which are developed in house and also a set of 'external' software packages (70) which are needed in addition such as Python, Boost, Qt, CLHEP, etc. These packages target many different areas of HEP computing such as data persistency, math, simulation, grid computing, databases, graphics, etc. Other packages provide tools for documentation, debugging, scripting languages and compilers. All these packages are provided in a consistent manner on different compilers, architectures and operating systems. The Software Process and Infrastructure project (SPI) [1] is responsible for the continous testing, coordination, release and deployment of these software packages. The main driving force for the actions carried out by SPI are the needs of the LHC experiments, but also other HEP experiments could profit from the set of consistent libraries provided and receive a stable and well tested foundation to build their experiment software frameworks. This presentation will first provide a brief description of the tools and services provided for the coordination, testing, release, deployment and presentation of LCG/AA software packages and then focus on a second set of tools provided for outside LHC experiments to deploy a stable set of HEP related software packages both as binary distribution or from source.

  2. Servicing HEP experiments with a complete set of ready integreated and configured common software components

    Roiser, Stefan; Gaspar, Ana; Perrin, Yves [CERN, CH-1211 Geneva 23, PH Department, SFT Group (Switzerland); Kruzelecki, Karol, E-mail: stefan.roiser@cern.c, E-mail: ana.gaspar@cern.c, E-mail: yves.perrin@cern.c, E-mail: karol.kruzelecki@cern.c [CERN, CH-1211 Geneva 23, PH Department, LBC Group (Switzerland)

    2010-04-01

    The LCG Applications Area at CERN provides basic software components for the LHC experiments such as ROOT, POOL, COOL which are developed in house and also a set of 'external' software packages (70) which are needed in addition such as Python, Boost, Qt, CLHEP, etc. These packages target many different areas of HEP computing such as data persistency, math, simulation, grid computing, databases, graphics, etc. Other packages provide tools for documentation, debugging, scripting languages and compilers. All these packages are provided in a consistent manner on different compilers, architectures and operating systems. The Software Process and Infrastructure project (SPI) [1] is responsible for the continous testing, coordination, release and deployment of these software packages. The main driving force for the actions carried out by SPI are the needs of the LHC experiments, but also other HEP experiments could profit from the set of consistent libraries provided and receive a stable and well tested foundation to build their experiment software frameworks. This presentation will first provide a brief description of the tools and services provided for the coordination, testing, release, deployment and presentation of LCG/AA software packages and then focus on a second set of tools provided for outside LHC experiments to deploy a stable set of HEP related software packages both as binary distribution or from source.

  3. 77 FR 40082 - Certain Gaming and Entertainment Consoles, Related Software, and Components Thereof...

    2012-07-06

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-745] Certain Gaming and Entertainment... gaming and entertainment consoles, related software, and components thereof by reason of infringement of... finally concluded that an industry exists within the United States that practices the '896, '094, '571...

  4. Design and Implementation of a Media Access Component at Picsearch Using a Rigorous Software Engineering Approach

    Silva, Diego Núñez

    2011-01-01

    With the arrival of a new generation of sophisticated smartphones, possibilities for mobile video usage are presenting exciting new opportunities. This Master's thesis is based on a collaboration with Picsearch to design and implement a software component that enables the company's video services in Android smartphones.

  5. 76 FR 52970 - In the Matter of Certain Biometric Scanning Devices, Components Thereof, Associated Software, and...

    2011-08-24

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-720] In the Matter of Certain Biometric... 17, 2010 based on a complaint filed on May 11, 2010, by Cross Match Technologies, Inc. (``Cross Match... certain biometric scanning devices, components thereof, associated software, and products containing the...

  6. Computer software program for monitoring the availability of systems and components of electric power generating systems

    Petersen, T.A.; Hilsmeier, T.A.; Kapinus, D.M.

    1994-01-01

    As availabilities of electric power generating stations systems and components become more and more important from a financial, personnel safety, and regulatory requirements standpoint, it is evident that a comprehensive, yet simple and user-friendly program for system and component tracking and monitoring is needed to assist in effectively managing the large volume of systems and components with their large numbers of associated maintenance/availability records. A user-friendly computer software program for system and component availability monitoring has been developed that calculates, displays and monitors selected component and system availabilities. This is a Windows trademark based (Graphical User Interface) program that utilizes a system flow diagram for the data input screen which also provides a visual representation of availability values and limits for the individual components and associated systems. This program can be customized to the user's plant-specific system and component selections and configurations. As will be discussed herein, this software program is well suited for availability monitoring and ultimately providing valuable information for improving plant performance and reducing operating costs

  7. The RAGE Game Software Components Repository for Supporting Applied Game Development

    Krassen Stefanov

    2017-09-01

    Full Text Available This paper presents the architecture of the RAGE repository, which is a unique and dedicated infrastructure that provides access to a wide variety of advanced technology components for applied game development. The RAGE project, which is the principal Horizon2020 research and innovation project on applied gaming, develops up to three dozens of software components (RAGE software assets that are reusable across a wide diversity of game engines, game platforms and programming languages. The RAGE repository provides storage space for assets and their artefacts and is designed as an asset life-cycle management system for defining, publishing, updating, searching and packaging for distribution of these assets. It will be embedded in a social platform for asset developers and other users. A dedicated Asset Repository Manager provides the main functionality of the repository and its integration with other systems. Tools supporting the Asset Manager are presented and discussed. When the RAGE repository is in full operation, applied game developers will be able to easily enhance the quality of their games by including selected advanced game software assets. Making available the RAGE repository system and its variety of software assets aims to enhance the coherence and decisiveness of the applied game industry.

  8. Center for Center for Technology for Advanced Scientific Component Software (TASCS)

    Kostadin, Damevski [Virginia State Univ., Petersburg, VA (United States)

    2015-01-25

    A resounding success of the Scientific Discovery through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedented computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS)1 tackles these these issues by exploiting component-based software development to facilitate collaborative high-performance scientific computing.

  9. Center for Technology for Advanced Scientific Component Software (TASCS) Consolidated Progress Report July 2006 - March 2009

    Bernholdt, D E; McInnes, L C; Govindaraju, M; Bramley, R; Epperly, T; Kohl, J A; Nieplocha, J; Armstrong, R; Shasharina, S; Sussman, A L; Sottile, M; Damevski, K

    2009-04-14

    A resounding success of the Scientific Discovery through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedented computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS) tackles these issues by exploiting component-based software development to facilitate collaborative high-performance scientific computing.

  10. The verification methodologies for a software modeling of Engineered Safety Features- Component Control System (ESF-CCS)

    Lee, Young-Jun; Cheon, Se-Woo; Cha, Kyung-Ho; Park, Gee-Yong; Kwon, Kee-Choon

    2007-01-01

    The safety of a software is not guaranteed through a simple testing of the software. The testing reviews only the static functions of a software. The behavior, dynamic state of a software is not reviewed by a software testing. The Ariane5 rocket accident and the failure of the Virtual Case File Project are determined by a software fault. Although this software was tested thoroughly, the potential errors existed internally. There are a lot of methods to solve these problems. One of the methods is a formal methodology. It describes the software requirements as a formal specification during a software life cycle and verifies a specified design. This paper suggests the methods which verify the design to be described as a formal specification. We adapt these methods to the software of a ESF-CCS (Engineered Safety Features-Component Control System) and use the SCADE (Safety Critical Application Development Environment) tool for adopting the suggested verification methods

  11. Development of software for computing forming information using a component based approach

    Kwang Hee Ko

    2009-12-01

    Full Text Available In shipbuilding industry, the manufacturing technology has advanced at an unprecedented pace for the last decade. As a result, many automatic systems for cutting, welding, etc. have been developed and employed in the manufacturing process and accordingly the productivity has been increased drastically. Despite such improvement in the manufacturing technology, however, development of an automatic system for fabricating a curved hull plate remains at the beginning stage since hardware and software for the automation of the curved hull fabrication process should be developed differently depending on the dimensions of plates, forming methods and manufacturing processes of each shipyard. To deal with this problem, it is necessary to create a “plug-in” framework, which can adopt various kinds of hardware and software to construct a full automatic fabrication system. In this paper, a framework for automatic fabrication of curved hull plates is proposed, which consists of four components and related software. In particular the software module for computing fabrication information is developed by using the ooCBD development methodology, which can interface with other hardware and software with minimum effort. Examples of the proposed framework applied to medium and large shipyards are presented.

  12. The prototype readout chain for CBM using the AFCK board and its software components

    Loizeau, Pierre-Alain; Emscherman, David; Lehnert, Jörg; Müller, Walter F. J.; Yang, Junfeng

    2015-09-01

    This paper presents a prototype for the readout chain of the Compressed Baryonic Matter (CBM) experiment using the AFCK FPGA board as Data Processing Board (DPB). The components of the readout chain are described, followed by some test setups, all based on different flavors of AFCK-DPB. Details about the functional blocks in the different versions of the DPB firmware are given, followed by a description of the corresponding software elements.

  13. Residual life assessment of major LWR components: NPAR approach and results

    Shah, V.N.; Weidenhamer, G.H.; Vora, J.P.

    1991-01-01

    The nuclear plant aging research (NPAR) program is systematically addressing the technical issues associated with understanding and managing aging of major LWR components. Twenty-one major components have been identified and prioritized according to their relevance to plant safety. Qualitative aging assessment has identified pertinent design features, materials, stressors, environments, aging mechanisms. and failure modes for each of the components. Emerging inspection, surveillance, and monitoring methods to characterize aging damage and mitigation methods to reduce the damage are currently being assessed. The results of all these assessments are used to develop life-assessment procedures for the components and are included in appropriate documents supporting the regulatory requirements for license renewal. (author)

  14. Aquarius' Object-Oriented, Plug and Play Component-Based Flight Software

    Murray, Alexander; Shahabuddin, Mohammad

    2013-01-01

    The Aquarius mission involves a combined radiometer and radar instrument in low-Earth orbit, providing monthly global maps of Sea Surface Salinity. Operating successfully in orbit since June, 2011, the spacecraft bus was furnished by the Argentine space agency, Comision Nacional de Actividades Espaciales (CONAE). The instrument, built jointly by NASA's Caltech/JPL and Goddard Space Flight Center, has been successfully producing expectation-exceeding data since it was powered on in August of 2011. In addition to the radiometer and scatterometer, the instrument contains an command & data-handling subsystem with a computer and flight software (FSW) that is responsible for managing the instrument, its operation, and its data. Aquarius' FSW is conceived and architected as a Component-based system, in which the running software consists of a set of Components, each playing a distinctive role in the subsystem, instantiated and connected together at runtime. Component architectures feature a well-defined set of interfaces between the Components, visible and analyzable at the architectural level (see [1]). As we will describe, this kind of an architecture offers significant advantages over more traditional FSW architectures, which often feature a monolithic runtime structure. Component-based software is enabled by Object-Oriented (OO) techniques and languages, the use of which again is not typical in space mission FSW. We will argue in this paper that the use of OO design methods and tools (especially the Unified Modeling Language), as well as the judicious usage of C++, are very well suited to FSW applications, and we will present Aquarius FSW, describing our methods, processes, and design, as a successful case in point.

  15. Order and chaos in agile software development: a comparison of two software development teams in a major IT company

    Wang, Xiaofeng; Vidgen, Richard

    2007-01-01

    peer-reviewed Agile methods have emerged and become popular over last few years as a response to shortcomings of the waterfall process model. However, agile processes are stamped by some as chaotic processes and are placed in opposition to waterfall approaches. This paper uses the edge of chaos concept from complex adaptive systems theory as a theoretical lens to analyse the roles of structure and planning in the software development process. The software development processes ...

  16. Operating Experience of Digital, Software-based Components Used in I and C and Electrical Systems in German NPPs

    Blum, Stefanie; Lochthofen, Andre; Quester, Claudia; Arians, Robert

    2015-01-01

    In recent years, many components in instrumentation and control (I and C) and electrical systems of nuclear power plants (NPPs) were replaced by digital, software-based components. Due to the more complex structure, software-based I and C and electrical components show the potential for new failure mechanisms and an increasing number of failure possibilities, including the potential for common cause failures. An evaluation of the operating experience of digital, software-based components may help to determine new failure modes of these components. In this paper, we give an overview over the results of the evaluation of the operating experience of digital, software-based components used in I and C and electrical systems in NPPs in Germany. (authors)

  17. Aging assessment and mitigation for major LWR [light water reactor] components

    Shah, Y.N.; Ware, A.G.; Conley, D.A.; MacDonald, P.E.; Burns, J.J. Jr.

    1989-01-01

    This paper summarizes some of the results of the Aging Assessment and Mitigation Project sponsored by the US Nuclear Regulatory Commission (USNRC), Office of Nuclear Regulatory Research. The objective of the project is to develop an understanding of the aging degradation of the major light water reactor (LWR) structures and components and to develop methods for predicting the useful life of these components so that the impact of aging on the safe operation of nuclear power plants can be evaluated and addressed. The research effort consists of integrating, evaluating, and updating the available aging-related information. This paper discusses current accomplishments and summarizes the significant degradation processes active in two major components: pressurized water reactor pressurizer surge and spray lines and nozzles, and light water reactor primary coolant pumps. This paper also evaluates the effectiveness of the current inservice inspection programs and presents conclusions and recommendations related to aging of these two major components. 37 refs., 7 figs., 3 tabs

  18. NASA JPL Distributed Systems Technology (DST) Object-Oriented Component Approach for Software Inter-Operability and Reuse

    Hall, Laverne; Hung, Chaw-Kwei; Lin, Imin

    2000-01-01

    The purpose of this paper is to provide a description of NASA JPL Distributed Systems Technology (DST) Section's object-oriented component approach to open inter-operable systems software development and software reuse. It will address what is meant by the terminology object component software, give an overview of the component-based development approach and how it relates to infrastructure support of software architectures and promotes reuse, enumerate on the benefits of this approach, and give examples of application prototypes demonstrating its usage and advantages. Utilization of the object-oriented component technology approach for system development and software reuse will apply to several areas within JPL, and possibly across other NASA Centers.

  19. A configurable component-based software system for magnetic field measurements

    Nogiec, J.M.; DiMarco, J.; Kotelnikov, S.; Trombly-Freytag, K.; Walbridge, D.; Tartaglia, M.; /Fermilab

    2005-09-01

    A new software system to test accelerator magnets has been developed at Fermilab. The magnetic measurement technique involved employs a single stretched wire to measure alignment parameters and magnetic field strength. The software for the system is built on top of a flexible component-based framework, which allows for easy reconfiguration and runtime modification. Various user interface, data acquisition, analysis, and data persistence components can be configured to form different measurement systems that are tailored to specific requirements (e.g., involving magnet type or test stand). The system can also be configured with various measurement sequences or tests, each of them controlled by a dedicated script. It is capable of working interactively as well as executing a preselected sequence of tests. Each test can be parameterized to fit the specific magnet type or test stand requirements. The system has been designed with portability in mind and is capable of working on various platforms, such as Linux, Solaris, and Windows. It can be configured to use a local data acquisition subsystem or a remote data acquisition computer, such as a VME processor running VxWorks. All hardware-oriented components have been developed with a simulation option that allows for running and testing measurements in the absence of data acquisition hardware.

  20. A Sociotechnical Negotiation Mechanism to Support Component Markets in Software Ecosystems

    Rodrigo Santos

    2017-12-01

    Full Text Available Organizations have opened up their software platforms and reusable assets to others, including partners and third-party developers around the world, creating software ecosystems (SECOs. This perspective can contribute to minimize nontechnical barriers of software reuse in industry because it explores potential benefits from the relations among companies and stakeholders. An inhibitor is the complexity in defining value for reusable assets in a scenario where producers try to meet customers’ expectations, and vice-versa. In this paper, we present a value-based mechanism to support component negotiation and socialization processes in a reuse repository in the SECO context as an extension of the Brechó-EcoSys environment. Social resources were integrated into the mechanism in order to aid component negotiation. An evaluation of the negotiation mechanism was initially performed based on an analysis of its elements and functions against critical factors in the negotiation within a SECO, identified in a previous systematic literature review. In addition, an analysis of the social resources supporting the negotiation mechanism was performed against popular sociotechnical elements for SECOs, identified in a previous survey with experts in the field. Finally, the negotiation process and the potential support provided by sociotechnical resources were investigated through an observational study where participants were engaged in some tasks playing as consumer and producers using the sociotechnical negotiation mechanism at Brechó-EcoSys environment. We concluded that sociotechnical resources (e.g., forum and tag cloud support component producers and consumers with useful information from the SECO community.

  1. Simulation of the removal of NET internal components with dynamic modeling software

    Becquet, M.; Crutzen, Y.R.; Farfaletti-Casali, F.

    1989-01-01

    The replacement of the internal plasma-facing components (first-wall and blanket segments) for maintenance or at the end of their lifetime is an important aspect of the design of the next European torus (NET) and of the remote handling procedures. The first phase of development of the design software tool INVDYN (inverse dynamics) is presented, which will allow optimization of the movements of the internal segments during replacement, taking into account inertial effects and structural deformations. A first analysis of the removal of one NET internal segment provides, for a defined trajectory, the required generalized forces that must be applied on the crane system

  2. InterFace: A software package for face image warping, averaging, and principal components analysis.

    Kramer, Robin S S; Jenkins, Rob; Burton, A Mike

    2017-12-01

    We describe InterFace, a software package for research in face recognition. The package supports image warping, reshaping, averaging of multiple face images, and morphing between faces. It also supports principal components analysis (PCA) of face images, along with tools for exploring the "face space" produced by PCA. The package uses a simple graphical user interface, allowing users to perform these sophisticated image manipulations without any need for programming knowledge. The program is available for download in the form of an app, which requires that users also have access to the (freely available) MATLAB Runtime environment.

  3. Assessment and management of ageing of major nuclear power plant components important to safety: Metal components of BWR containment systems

    2000-10-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must therefore be effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety, which was issued by the IAEA in 1992. The current practices for the assessment of safety margins (fitness for service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canada deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), and water moderated, water cooled energy reactors (WWERs) are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues. The guidance reports are directed toward technical experts from NPPs and from regulatory, plant design, manufacturing and technical support organizations dealing with specific

  4. Software

    Macedo, R.; Budd, G.; Ross, E.; Wells, P.

    2010-07-15

    The software section of this journal presented new software programs that have been developed to help in the exploration and development of hydrocarbon resources. Software provider IHS Inc. has made additions to its geological and engineering analysis software tool, IHS PETRA, a product used by geoscientists and engineers to visualize, analyze and manage well production, well log, drilling, reservoir, seismic and other related information. IHS PETRA also includes a directional well module and a decline curve analysis module to improve analysis capabilities in unconventional reservoirs. Petris Technology Inc. has developed a software to help manage the large volumes of data. PetrisWinds Enterprise (PWE) helps users find and manage wellbore data, including conventional wireline and MWD core data; analysis core photos and images; waveforms and NMR; and external files documentation. Ottawa-based Ambercore Software Inc. has been collaborating with Nexen on the Petroleum iQ software for steam assisted gravity drainage (SAGD) producers. Petroleum iQ integrates geology and geophysics data with engineering data in 3D and 4D. Calgary-based Envirosoft Corporation has developed a software that reduces the costly and time-consuming effort required to comply with Directive 39 of the Alberta Energy Resources Conservation Board. The product includes an emissions modelling software. Houston-based Seismic Micro-Technology (SMT) has developed the Kingdom software that features the latest in seismic interpretation. Holland-based Joa Oil and Gas and Calgary-based Computer Modelling Group have both supplied the petroleum industry with advanced reservoir simulation software that enables reservoir interpretation. The 2010 software survey included a guide to new software applications designed to facilitate petroleum exploration, drilling and production activities. Oil and gas producers can use the products for a range of functions, including reservoir characterization and accounting. In

  5. Survey of Software Literacy, Behavior and Personal Traits of Freshmen Accounting Majors

    Hung, Yu Hsin; Chang, Ray I.; Lin, Chun Fu

    2015-01-01

    In recent decades, the rapid growth of technology has resulted in software being widely applied in various domains. Attitudes toward using software play an important role in every industry. This study aims to explore the software literacy of accounting students along with their personal traits, such as learning styles and user behavior. This was a…

  6. Advances in model-based software for simulating ultrasonic immersion inspections of metal components

    Chiou, Chien-Ping; Margetan, Frank J.; Taylor, Jared L.; Engle, Brady J.; Roberts, Ronald A.

    2018-04-01

    Under the sponsorship of the National Science Foundation's Industry/University Cooperative Research Center at ISU, an effort was initiated in 2015 to repackage existing research-grade software into user-friendly tools for the rapid estimation of signal-to-noise ratio (SNR) for ultrasonic inspections of metals. The software combines: (1) a Python-based graphical user interface for specifying an inspection scenario and displaying results; and (2) a Fortran-based engine for computing defect signals and backscattered grain noise characteristics. The later makes use the Thompson-Gray measurement model for the response from an internal defect, and the Thompson-Margetan independent scatterer model for backscattered grain noise. This paper, the third in the series [1-2], provides an overview of the ongoing modeling effort with emphasis on recent developments. These include the ability to: (1) treat microstructures where grain size, shape and tilt relative to the incident sound direction can all vary with depth; and (2) simulate C-scans of defect signals in the presence of backscattered grain noise. The simulation software can now treat both normal and oblique-incidence immersion inspections of curved metal components. Both longitudinal and shear-wave inspections are treated. The model transducer can either be planar, spherically-focused, or bi-cylindrically-focused. A calibration (or reference) signal is required and is used to deduce the measurement system efficiency function. This can be "invented" by the software using center frequency and bandwidth information specified by the user, or, alternatively, a measured calibration signal can be used. Defect types include flat-bottomed-hole reference reflectors, and spherical pores and inclusions. Simulation outputs include estimated defect signal amplitudes, root-mean-square values of grain noise amplitudes, and SNR as functions of the depth of the defect within the metal component. At any particular depth, the user can view

  7. Chemical composition and antiprotozoal activities of Colombian Lippia spp essential oils and their major components

    Patricia Escobar

    2010-03-01

    Full Text Available The chemical composition and biological activities of 19 essential oils and seven of their major components were tested against free and intracellular forms of Leishmania chagasi and Trypanosoma cruzi parasites as well as Vero and THP-1 mammalian cell lines. The essential oils were obtained from different species of Lippia, a widely distributed genus of Colombian plants. They were extracted by microwave radiation-assisted hydro-distillation and characterised by GC-FID and GC-MS. The major components were geranial, neral, limonene, nerol, carvacrol, p-cymene, γ-terpinene, carvone and thymol. The essential oil of Lippia alba exhibited the highest activity against T. cruzi epimastigotes and intracellular amastigotes with an IC50 of 5.5 μg/mL and 12.2 μg/mL, respectively. The essential oil of Lippia origanoides had an IC50 of 4.4 μg/mL in L. chagasi promastigotes and exhibited no toxicity in mammalian cells. Thymol (IC50 3.2 ± 0.4 μg/mL and S-carvone (IC50 6.1 ± 2.2 μg/mL, two of the major components of the active essential oils, were active on intracellular amastigotes of T. cruziinfected Vero cells, with a selective index greater than 10. None of the essential oils or major components tested in this study was active on amastigotes of L. chagasi infected THP-1 cells.

  8. Surgical planning of total hip arthroplasty: accuracy of computer-assisted EndoMap software in predicting component size

    Davila, Jesse A.; Kransdorf, Mark J.; Duffy, Gavan P.

    2006-01-01

    The purpose of our study was to assess the accuracy of a computer-assisted templating in the surgical planning of patients undergoing total hip arthroplasty utilizing EndoMap software (Siemans AG, Medical Solutions, Erlangen, Germany). Endomap Software is an electronic program that uses DICOM images to analyze standard anteroposterior radiographs for determination of optimal prosthesis component size. We retrospectively reviewed the preoperative radiographs of 36 patients undergoing uncomplicated primary total hip arthroplasty, utilizing EndoMap software, Version VA20. DICOM anteroposterior radiographs were analyzed using standard manufacturer supplied electronic templates to determine acetabular and femoral component sizes. No additional clinical information was reviewed. Acetabular and femoral component sizes were assessed by an orthopedic surgeon and two radiologists. Mean and estimated component size was compared with component size as documented in operative reports. The mean estimated acetabular component size was 53 mm (range 48-60 mm), 1 mm larger than the mean implanted size of 52 mm (range 48-62 mm). Thirty-one of 36 acetabular component sizes (86%) were accurate within one size. The mean calculated femoral component size was 4 (range 2-7), 1 size smaller than the actual mean component size of 5 (range 2-9). Twenty-six of 36 femoral component sizes (72%) were accurate within one size, and accurate within two sizes in all but four cases (94%). EndoMap Software predicted femoral component size well, with 72% within one component size of that used, and 94% within two sizes. Acetabular component size was predicted slightly better with 86% within one component size and 94% within two component sizes. (orig.)

  9. Testing, installation and development of hardware and software components for the forward pixel detector of CMS

    Florez Bustos, Carlos Andres

    2007-01-01

    The LHC (Large Hadron Collider) will be the particle accelerator with the highest collision energy ever. CMS (Compact Muon Solenoid) is one of the two largest experiments at the LHC. A main goal of CMS is to elucidate the electroweak symmetry breaking and determine if the Higgs mechanism is responsible for it. The pixel detector in CMS is the closest detector to the interaction point and is part of the tracker system. This thesis presents four different projects related to the forward pixel detector, performed as part of the testing and development of its hardware and software components. It presents the methods, implementation and results for the data acquisition and installation of the detector control system at the Meson Test Beam Facility of Fermilab for the beam test of the detector; the study of the C.A.E.N power supply and the multi service cable; the layout of the test stands for the assembly of the half-disk and half-service cylinder and the development of a software interface to the data acquisition...

  10. Characterization of the major nutritional components of Caryocar brasiliense fruit pulp by NMR spectroscopy

    Miranda-Vilela, Ana Luisa; Grisolia, Cesar Koppe; Resck, Ines Sabioni; Mendonca, Marcio Antonio

    2009-01-01

    Pequi (Caryocar brasiliense Camb.), a typical fruit of Brazilian Cerrado, is well known in regional cookery and used in folk medicine to treat various illnesses. Mass spectrometry and chromatographic methods have identified the organic composition of pequi fruit pulp; however, NMR spectroscopy is used for the first time to characterize the nutritional components of organic and aqueous-ethanolic extracts. This spectroscopic technique determined the triacylglycerols in the pequi organic fraction, which is constituted mainly by oleate and palmitate esters, and detected the carbohydrate mixtures as the major components of aqueous and ethanolic fractions, respectively. In this study, presence of phenolic compounds was only evidenced in the ethanolic fraction. (author)

  11. Characterization of the major nutritional components of Caryocar brasiliense fruit pulp by NMR spectroscopy

    Miranda-Vilela, Ana Luisa; Grisolia, Cesar Koppe [Universidade de Brasilia (UnB), DF (Brazil). Inst. de Ciencias Biologicas. Dept. de Genetica e Morfologia; Resck, Ines Sabioni; Mendonca, Marcio Antonio [Universidade de Brasilia (UnB), DF (Brazil). Inst. de Quimica

    2009-07-01

    Pequi (Caryocar brasiliense Camb.), a typical fruit of Brazilian Cerrado, is well known in regional cookery and used in folk medicine to treat various illnesses. Mass spectrometry and chromatographic methods have identified the organic composition of pequi fruit pulp; however, NMR spectroscopy is used for the first time to characterize the nutritional components of organic and aqueous-ethanolic extracts. This spectroscopic technique determined the triacylglycerols in the pequi organic fraction, which is constituted mainly by oleate and palmitate esters, and detected the carbohydrate mixtures as the major components of aqueous and ethanolic fractions, respectively. In this study, presence of phenolic compounds was only evidenced in the ethanolic fraction. (author)

  12. A Component Approach to Collaborative Scientific Software Development: Tools and Techniques Utilized by the Quantum Chemistry Science Application Partnership

    Joseph P. Kenny

    2008-01-01

    Full Text Available Cutting-edge scientific computing software is complex, increasingly involving the coupling of multiple packages to combine advanced algorithms or simulations at multiple physical scales. Component-based software engineering (CBSE has been advanced as a technique for managing this complexity, and complex component applications have been created in the quantum chemistry domain, as well as several other simulation areas, using the component model advocated by the Common Component Architecture (CCA Forum. While programming models do indeed enable sound software engineering practices, the selection of programming model is just one building block in a comprehensive approach to large-scale collaborative development which must also address interface and data standardization, and language and package interoperability. We provide an overview of the development approach utilized within the Quantum Chemistry Science Application Partnership, identifying design challenges, describing the techniques which we have adopted to address these challenges and highlighting the advantages which the CCA approach offers for collaborative development.

  13. An adaptive neuro fuzzy model for estimating the reliability of component-based software systems

    Kirti Tyagi

    2014-01-01

    Full Text Available Although many algorithms and techniques have been developed for estimating the reliability of component-based software systems (CBSSs, much more research is needed. Accurate estimation of the reliability of a CBSS is difficult because it depends on two factors: component reliability and glue code reliability. Moreover, reliability is a real-world phenomenon with many associated real-time problems. Soft computing techniques can help to solve problems whose solutions are uncertain or unpredictable. A number of soft computing approaches for estimating CBSS reliability have been proposed. These techniques learn from the past and capture existing patterns in data. The two basic elements of soft computing are neural networks and fuzzy logic. In this paper, we propose a model for estimating CBSS reliability, known as an adaptive neuro fuzzy inference system (ANFIS, that is based on these two basic elements of soft computing, and we compare its performance with that of a plain FIS (fuzzy inference system for different data sets.

  14. Matrix effects in PIXE evaluation of the major components in thick homogeneous samples

    Oystaeyen, B. van; Demortier, G.

    1983-01-01

    Matrix effects on the major component X-ray yields in PIXE measurements are studied in general terms with the Au-Cu-Ag matrix as practical example. Postulating firstly that all the major components may be simultaneously detected through one well-isolated peak for each of them, and secondly that a known reference material is available which contains all the elements of the unknown sample, we propose a direct method to extract the true concentrations of the latter taking into accout the matrix effects. The geometrical parameters describing the target location with respect to ion beam direction and detector position are also studied and a first attempt is made to include them in the data treatment. (orig.)

  15. Melittin, a major peptide component of bee venom, and its conjugates in cancer therapy

    Rady, Islam; Siddiqui, Imtiaz A.; Rady, Mohamad; Mukhtar, Hasan

    2017-01-01

    Melittin (MEL), a major peptide component of bee venom, is an attractive candidate for cancer therapy. This agent has shown a variety of anti-cancer effects in preclinical cell culture and animal model systems. Despite a convincing efficacy data against variety of cancers, its applicability to humans has met with challenges due to several issues including its non-specific cytotoxicity, degradation and hemolytic activity. Several optimization approaches including utilization of nanoparticle ba...

  16. Failures to be celebrated: an analysis of major pivots of software startups

    Bajwa, Sohaib Shahid; Wang, Xiaofeng; Duc, Anh Nguyen; Abrahamsson, Pekka

    2017-01-01

    In the context of software startups, project failure is embraced actively and considered crucial to obtain validated learning that can lead to pivots. A pivot is the strategic change of a business concept, product or the different elements of a business model. A better understanding is needed on different types of pivots and different factors that lead to failures and trigger pivots, for software entrepreneurial teams to make better decisions under chaotic and unpredictable environment. Due t...

  17. Regulatory instrument review: Management of aging of LWR [light water reactor] major safety-related components

    Werry, E.V.

    1990-10-01

    This report comprises Volume 1 of a review of US nuclear plant regulatory instruments to determine the amount and kind of information they contain on managing the aging of safety-related components in US nuclear power plants. The review was conducted for the US Nuclear Regulatory Commission (NRC) by the Pacific Northwest Laboratory (PNL) under the NRC Nuclear Plant Aging Research (NPAR) Program. Eight selected regulatory instruments, e.g., NRC Regulatory Guides and the Code of Federal Regulations, were reviewed for safety-related information on five selected components: reactor pressure vessels, steam generators, primary piping, pressurizers, and emergency diesel generators. Volume 2 will be concluded in FY 1991 and will also cover selected major safety-related components, e.g., pumps, valves and cables. The focus of the review was on 26 NPAR-defined safety-related aging issues, including examination, inspection, and maintenance and repair; excessive/harsh testing; and irradiation embrittlement. The major conclusion of the review is that safety-related regulatory instruments do provide implicit guidance for aging management, but include little explicit guidance. The major recommendation is that the instruments be revised or augmented to explicitly address the management of aging

  18. (R)-3-hydroxyhexan-2-one is a major pheromone component of Anelaphus inflaticollis (Coleoptera: Cerambycidae).

    Ray, A M; Swift, I P; Moreira, J A; Millar, J G; Hanks, L M

    2009-10-01

    We report the identification and field bioassays of a major component of the male-produced aggregation pheromone of Anelaphus inflaticollis Chemsak, an uncommon desert cerambycine beetle. Male A. inflaticollis produced a sex-specific blend of components that included (R)-3-hydroxyhexan-2-one, (S)-2-hydroxyhexan-3-one, 2,3-hexanedione, and (2R,3R)- and (2R,3S)-2,3-hexanediols. Field trials with baited bucket traps determined that the reconstructed synthetic pheromone blend and (R)-3-hydroxyhexan-2-one alone attracted adult A. inflaticollis of both sexes, with significantly more beetles being attracted to the blend. We conclude that (R)-3-hydroxyhexan-2-one is a major pheromone component of A. inflaticollis, and our results suggest that one or more of the minor components may further increase attraction of conspecifics. Scanning electron microscopy showed that male A. inflaticollis have pores on the prothorax that are consistent in structure with sex-specific pheromone gland pores in related species. Males also displayed stereotyped calling behavior similar to that observed in other cerambycine species. This study represents the first report of volatile pheromones for a cerambycine species in the tribe Elaphidiini.

  19. Inter-firm R&D networks in the global software industry : An overview of major trends and patterns

    Cloodt, M.M.A.H.; Hagedoorn, J.; Roijakkers, N.

    2010-01-01

    This paper presents an analysis of some major historical trends in inter-firm R&D partnering in the international software industry during the period 1970–1999. Our research demonstrates an overall growth pattern of newly made R&D partnerships and reveals the important role played by leading firms.

  20. Impact of Base Functional Component Types on Software Functional Size based Effort Estimation

    Gencel, Cigdem; Buglione, Luigi

    2008-01-01

    Software effort estimation is still a significant challenge for software management. Although Functional Size Measurement (FSM) methods have been standardized and have become widely used by the software organizations, the relationship between functional size and development effort still needs further investigation. Most of the studies focus on the project cost drivers and consider total software functional size as the primary input to estimation models. In this study, we investigate whether u...

  1. Maintenance service for major component of PWR plant. Replacement of pressurizer safe end weld

    Miyoshi, Yoshiyuki; Kobayashi, Yuki; Yamamoto, Kazuhide; Ueda, Takeshi; Suda, Naoki; Shintani, Takashi

    2017-01-01

    In October 2016, MHI completed the replacement of safe end weld of pressurizer (Pz) of Ringhals unit 3, which was the first maintenance work for main component of pressurized water reactor (PWR) plant in Europe. For higher reliability and longer lifetime of PWR plant, MHI has conducted many kinds of maintenance works of main components of PWR plants in Japan against stress corrosion cracking due to aging degradation. Technical process for replacement of Pz safe end weld were established by MHI. MHI has experienced the work for 21 PWR units in Japan. That of Ringhals unit 3 was planned and conducted based on the experiences. In this work, Alloy 600 used for welds of nozzles of Pz was replaced with Alloy 690. Alloy 690 is more corrosive-resistant than Alloy 600. Specially designed equipment and technical process were developed and established by MHI to replace safe end weld of Pz and applied for the Ringhals unit 3 as a first application in Europe. The application had been performed in success and achieved the planned replacement work duration and total radiation dose by using sophisticated machining and welding equipment designed to meet the requirements to be small, lightweight and remote-controlled and operating by well skilled MHI personnel experienced in maintenance activities for major components of PWR plant in Japan. The success shows that the experience, activities and technology developed in Japan for main components of PWR plant shall be applicable to contribute reliable operations of nuclear power plants in Europe and other countries. (author)

  2. Assessment and management of ageing of major nuclear power plant components important to safety: Steam generators

    1997-11-01

    This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety which was issued by the IAEA in 1992. They have been compiled using contributions from technical experts in typically 10 to 12 countries for each report, a feedback from a September 1994 Technical Committee Meeting attended by 53 technical experts from 21 Member States (who reviewed first drafts in specialized working groups), and review comments from invited specialists

  3. Development of technology on natural flaw fabrication and precise diagnosis for the major components in NPPs

    Han, Jung Ho; Choi, Myung Sik; Lee, Doek Hyun; Hur, Do Haeng

    2002-01-01

    The objective of this research is to develop a fabrication technology of natural flaw specimen of major components in NPPs and a technology of precise diagnosis for failure and degradation of components using natural flaw specimen. 1) Successful development of the natural flaw fabrication technology of SG tube 2) Evaluation of ECT signal and development of precise diagnosis using natural flaws. - Determination of length, depth, width, and multiplicity of fabricated natural flaws. - Informations about detectability and accuracy of ECT evaluation on various kinds of defects are collected when the combination of probe and frequency is changed. - An advanced technology for precise ECT evaluation is established. 3) Application of precise ECT diagnosis to failure analysis of SG tube in operation. - Fretting wear of KSNP SG. - ODSCC at tube expanded region of KSNP SG. - Determination of through/non-through wall of axial crack

  4. Enhancing requirements engineering for patient registry software systems with evidence-based components.

    Lindoerfer, Doris; Mansmann, Ulrich

    2017-07-01

    Patient registries are instrumental for medical research. Often their structures are complex and their implementations use composite software systems to meet the wide spectrum of challenges. Commercial and open-source systems are available for registry implementation, but many research groups develop their own systems. Methodological approaches in the selection of software as well as the construction of proprietary systems are needed. We propose an evidence-based checklist, summarizing essential items for patient registry software systems (CIPROS), to accelerate the requirements engineering process. Requirements engineering activities for software systems follow traditional software requirements elicitation methods, general software requirements specification (SRS) templates, and standards. We performed a multistep procedure to develop a specific evidence-based CIPROS checklist: (1) A systematic literature review to build a comprehensive collection of technical concepts, (2) a qualitative content analysis to define a catalogue of relevant criteria, and (3) a checklist to construct a minimal appraisal standard. CIPROS is based on 64 publications and covers twelve sections with a total of 72 items. CIPROS also defines software requirements. Comparing CIPROS with traditional software requirements elicitation methods, SRS templates and standards show a broad consensus but differences in issues regarding registry-specific aspects. Using an evidence-based approach to requirements engineering for registry software adds aspects to the traditional methods and accelerates the software engineering process for registry software. The method we used to construct CIPROS serves as a potential template for creating evidence-based checklists in other fields. The CIPROS list supports developers in assessing requirements for existing systems and formulating requirements for their own systems, while strengthening the reporting of patient registry software system descriptions. It may be

  5. Space Shuttle Program Primary Avionics Software System (PASS) Success Legacy -Major Accomplishments and Lessons Learned

    Orr, James K.

    2010-01-01

    This presentation has shown the accomplishments of the PASS project over three decades and highlighted the lessons learned. Over the entire time, our goal has been to continuously improve our process, implement automation for both quality and increased productivity, and identify and remove all defects due to prior execution of a flawed process in addition to improving our processes following identification of significant process escapes. Morale and workforce instability have been issues, most significantly during 1993 to 1998 (period of consolidation in aerospace industry). The PASS project has also consulted with others, including the Software Engineering Institute, so as to be an early evaluator, adopter, and adapter of state-of-the-art software engineering innovations.

  6. Temporal variations of PM1 major components in an urban street canyon.

    Yubero, E; Galindo, N; Nicolás, J F; Crespo, J; Calzolai, G; Lucarelli, F

    2015-09-01

    Seasonal changes in the levels of PM1 and its main components (organic carbon (OC), elemental carbon (EC), SO4 (2-), NO3 (-) and NH4 (+)) were studied in an urban street canyon in southeastern Spain. Although PM1 levels did not show an evident seasonal cycle, strong variations in the concentrations of its major components were observed. Ammonium sulfate, the main secondary inorganic compound, was found to be of regional origin. Its formation was favored during summer due to increased photochemical activity. In contrast, the concentrations of particulate ammonium nitrate, which is thermally unstable, were highest in winter. Although traffic emissions are the dominant source of EC in the city, variations in traffic intensity could not explain the seasonal cycle of this component. The higher EC concentrations during the cold months were attributed to the lower dispersion conditions and the increase in EC emissions. Special attention has been given to variations in organic carbon levels since it accounted for about one third of the total PM1 mass. The concentrations of both total OC and secondary OC (SOC) were maxima in winter. The observed seasonal variation in SOC levels is similar to that found in other southern European cities where the frequency of sunny days in winter is high enough to promote photochemical processes.

  7. Development of internet-based information systems using software components with the emphasis on the application in the military organization

    Miloš J. Pejanović

    2011-01-01

    Full Text Available The development of personal computers and Internet technology causes continuous changes in methodological approaches and concepts of development of information systems. Most existing information systems, due to their heterogeneity, have a problem of integration of subsystems. In order to overcome this problem, software vendors offer different solutions. In this work we explore different approaches and propose an optimal way, with a special emphasis on its application in the military organization. By applying modern approaches in the development of information systems on the concept of distributed component systems, we come to the set of proposed solutions from different manufacturers. The solutions are related to the mechanisms which should ensure that components written in different languages cooperate with each other in heterogeneous systems that are in different nodes in the computer network. This work describes the concept of component distributed information systems of Internet technology and their capabilities and offers a solution specifying the implementation environment in the military organization. Access to the development of information systems In the development of information systems, an important role is given to the choice of appropriate methods and tools. For large systems such as military organizations, standardized procedures and methodologies for the development of information systems are recommended. There are different methodological approaches in the development of information systems: a systematic integrated approach to development (from design, implementation to implementation and maintenance and development of information systems as technical - technological structures (standard computer and network service. The combination of these two approaches leads to the concept of 'open systems' that allow different standards and IT services to operate on these systems. The UML system description of the process of software

  8. A procedure for evaluating residual life of major components in light water reactors

    Uchida, S.; Fujimori, H.; Ibe, E.; Kuniya, J.; Hayashi, M.; Fuse, M.; Yamauchi, K.

    1995-01-01

    A computer program for evaluating residual life of major components in boiling water reactors is proposed. It divides the stress corrosion cracking process into two stages; a probabilistic crack generation stage and a deterministic crack propagation one. The minimum period of the crack generation stage is evaluated assuming an exponential distribution of the stage. The crack propagation rate is calculated by the slip-dissolution/film-rupture model. The neutron flux and fluence dependence of the neutron radiation effects on material properties was evaluated by using theoretical models of radiation damage. The computer program works on an engineering work station. Evaluated results are displayed as a map of the residual life, or as graphs of crack length evolution

  9. Melittin, a major peptide component of bee venom, and its conjugates in cancer therapy.

    Rady, Islam; Siddiqui, Imtiaz A; Rady, Mohamad; Mukhtar, Hasan

    2017-08-28

    Melittin (MEL), a major peptide component of bee venom, is an attractive candidate for cancer therapy. This agent has shown a variety of anti-cancer effects in preclinical cell culture and animal model systems. Despite a convincing efficacy data against variety of cancers, its applicability to humans has met with challenges due to several issues including its non-specific cytotoxicity, degradation and hemolytic activity. Several optimization approaches including utilization of nanoparticle based delivery of MEL have been utilized to circumvent the issues. Here, we summarize the current understanding of the anticancer effects of bee venom and MEL on different kinds of cancers. Further, we also present the available information for the possible mechanism of action of bee venom and/or MEL. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Pharmacological activity of salvinorin A, the major component of Salvia divinorum.

    Listos, Joanna; Merska, Alicja; Fidecka, Sylwia

    2011-01-01

    The hallucinogenic plant Salvia divinorum (i.e., "magic mint") is a member of the Sage family that has been historically used for divination and shamanism by the Mazatecs. Today, S. divinorum has become increasingly popular as a recreational drug for its hallucinogenic effects. The non-nitrogenous diterpene, salvinorin A, the major active component of S. divinorum, is responsible for the hallucinogenic effect of this plant. Here, we described the behavioral effects of salvinorin A in animals including the addictive, antinociception and antidepressant properties of the drug. The present paper also demonstrates the not well recognized (or unclear) mechanisms of action of salvinorin A. The last part of the paper presents information about the legal status of S. divinorum and its derivatives. Taking into account the increasing popularity and consumption of salvinorin A and S. divinorum today, it is important to collect all data on the pharmacological profile of this plant and its products.

  11. Thermal-structural response of EBR-II major components under reactor operational transients

    Chang, L.K.; Lee, M.J.

    1983-01-01

    Until recently, the LMFBR safety research has been focused primarily on severe but highly unlikely accident, such as hypothetical-core-disruptive accidents (HCDA's), and not enough attention has been given to accident prevention, which is less severe but more likely sequence. The objective of the EBR-II operational reliability testing (ORT) is to demonstrate that the reactor can be designed and operated to prevent accident. A series of mild duty cycles and overpower transients were designed for accident prevention tests. An assessment of the EBR-II major plant components has been performed to assure structural integrity of the reactor plant for the ORT program. In this paper, the thermal-structural response and structural evaluation of the reactor vessel, the reactor-vessel cover, the intermediate heat exchanger (IHX) and the superheater are presented

  12. Reliability Analysis and Optimal Release Problem Considering Maintenance Time of Software Components for an Embedded OSS Porting Phase

    Tamura, Yoshinobu; Yamada, Shigeru

    OSS (open source software) systems which serve as key components of critical infrastructures in our social life are still ever-expanding now. Especially, embedded OSS systems have been gaining a lot of attention in the embedded system area, i.e., Android, BusyBox, TRON, etc. However, the poor handling of quality problem and customer support prohibit the progress of embedded OSS. Also, it is difficult for developers to assess the reliability and portability of embedded OSS on a single-board computer. In this paper, we propose a method of software reliability assessment based on flexible hazard rates for the embedded OSS. Also, we analyze actual data of software failure-occurrence time-intervals to show numerical examples of software reliability assessment for the embedded OSS. Moreover, we compare the proposed hazard rate model for the embedded OSS with the typical conventional hazard rate models by using the comparison criteria of goodness-of-fit. Furthermore, we discuss the optimal software release problem for the porting-phase based on the total expected software maintenance cost.

  13. Comparative study on major bioactive components in natural, artificial and in-vitro cultured Calculus Bovis.

    Yan, Shi-Kai; Wu, Yan-Wen; Liu, Run-Hui; Zhang, Wei-Dong

    2007-01-01

    Major bioactive components in various Calculus Bovis, including natural, artificial and in-vitro cultured Calculus Bovis, were comparatively studied. An approach of high-performance liquid chromatography coupled with ultraviolet and evaporative light scattering detections (HPLC/UV/ELSD) was established to simultaneously determinate six bioactive components thereof, including five bile acids (cholic acid, deoxycholic acid, ursodeoxycholic, chenodeoxycholic acid, hyodeoxycholic acid) and bilirubin. ELSD and UV detector were applied to detect bile acids and bilirubin respectively. The assay was performed on a C(18) column with water-acetonitrile gradient elution and the investigated constituents were authenticated by comparing retention times and mass spectra with those of reference compounds. The proposed method was applied to analyze twenty-one Calculus Bovis extraction samples, and produced data with acceptable linearity, precision, repeatability and accuracy. The result indicated the variations among Calculus Bovis samples under different developmental conditions. Artificial and in-vitro cultured Calculus Bovis, especially in-vitro cultured ones, which contain total bioactive constituents no less than natural products and have the best batch-to-batch uniformity, suffice to be used as substitutes of natural Calculus Bovis.

  14. Metabolic syndrome definitions and components in predicting major adverse cardiovascular events after kidney transplantation.

    Prasad, G V Ramesh; Huang, Michael; Silver, Samuel A; Al-Lawati, Ali I; Rapi, Lindita; Nash, Michelle M; Zaltzman, Jeffrey S

    2015-01-01

    Metabolic syndrome (MetS) associates with cardiovascular risk post-kidney transplantation, but its ambiguity impairs understanding of its diagnostic utility relative to components. We compared five MetS definitions and the predictive value of constituent components of significant definitions for major adverse cardiovascular events (MACE) in a cohort of 1182 kidney transplant recipients. MetS definitions were adjusted for noncomponent traditional Framingham risk factors and relevant transplant-related variables. Kaplan-Meier, logistic regression, and Cox proportional hazards analysis were utilized. There were 143 MACE over 7447 patient-years of follow-up. Only the World Health Organization (WHO) 1998 definition predicted MACE (25.3 vs 15.5 events/1000 patient-years, P = 0.019). Time-to-MACE was 5.5 ± 3.5 years with MetS and 6.8 ± 3.9 years without MetS (P < 0.0001). MetS was independent of pertinent MACE risk factors except age and previous cardiac disease. Among MetS components, dysglycemia provided greatest hazard ratio (HR) for MACE (1.814 [95% confidence interval 1.26-2.60]), increased successively by microalbuminuria (HR 1.946 [1.37-2.75]), dyslipidemia (3.284 [1.72-6.26]), hypertension (4.127 [2.16-7.86]), and central obesity (4.282 [2.09-8.76]). MetS did not affect graft survival. In summary, although the WHO 1998 definition provides greatest predictive value for post-transplant MACE, most of this is conferred by dysglycemia and is overshadowed by age and previous cardiac disease. © 2014 Steunstichting ESOT.

  15. Stress-based fatigue assessment of major component in NPP using modified Green's function approach

    Ko, Han Ok; Jhung, Myung Jo; Choi, Jae Boong

    2013-01-01

    In this paper, the modified GFA which can consider temperature-dependent material properties is proposed by using a neural network (NN) and weight factor. To verify the modified GFA, thermal stresses by the proposed method are compared with those by FEM. Finally, pros and cons of the new method as well as technical findings from the assessment are discussed to show applicability of them. In this paper, the modified GFA considering temperature-dependent material properties is proposed by using NN and weight factor. To verify the proposed method, thermal stresses by the modified Green's function are compared with those by FEM and the results between two methods show a good agreement. Finally, it is anticipated that more precise fatigue evaluation is performed by using the proposed method. Recently, 434 nuclear reactors are being operated in the world. Among them, about 40% reactors are being operated beyond their design life or will be approaching their life. During the long term operation, various degradation mechanisms are occurred. Fatigue damage caused by alternating operational stresses in terms of temperature or pressure change is the one of important damage mechanisms in the nuclear power plants (NPPs). Although components important to safety were designed to withstand the fatigue damage, cumulative usage factor (CUF) at some locations can exceed the design limit beyond the design life. So, it is necessary to monitor the fatigue damage of major components during the long term operation. Researches on fatigue monitoring system (FMS) have been widely performed. In USA, the FatiguePro was developed by EPRI and was applied to the CE, WEC, B and W and GE type reactors. In Korea, the Kori unit 1 which started commercial operation in 1978 is being operated beyond its design life. At the stage of the license renewal, various plans for degradation mechanisms were established and reviewed. And, in case of fatigue damage, to monitor the fatigue damage of major components

  16. Software Hardware Asset Reuse Enterprise (SHARE) Repository Framework Final Report: Component Specification and Ontology

    Johnson, Jean; Blais, Curtis

    2008-01-01

    ...) was tasked to develop a component specification and ontology for the SHARE repository. A description of SHARE and the requirements for a component specification and ontology supporting this repository are available in Johnson (2007...

  17. A Pattern Language for the Evolution of Component-based Software Architectures

    Ahmad, Aakash; Jamshidi, Pooyan; Pahl, Claus

    2013-01-01

    Modern software systems are prone to a continuous evolution under frequently varying requirements. Architecture-centric software evolution enables change in system’s structure and behavior while maintaining a global view of the software to address evolution-centric tradeoffs. Lehman’s law...... evolution problems. We propose that architectural evolution process requires an explicit evolution-centric knowledge – that can be discovered, shared, and reused – to anticipate and guide change management. Therefore, we present a pattern language as a collection of interconnected change patterns......) as a complementary and integrated phase to facilitate reuse-driven architecture change execution (pattern language application). Reuse-knowledge in the proposed pattern language is expressed as a formalised collection of interconnected-patterns. Individual patterns in the language build on each other to facilitate...

  18. In vitro susceptibility of Trypanosoma brucei brucei to selected essential oils and their major components.

    Costa, Sonya; Cavadas, Cláudia; Cavaleiro, Carlos; Salgueiro, Lígia; do Céu Sousa, Maria

    2018-07-01

    Aiming for discovering effective and harmless antitrypanosomal agents, 17 essential oils and nine major components were screened for their effects on T. b. brucei. The essential oils were obtained by hydrodistillation from fresh plant material and analyzed by GC and GC-MS. The trypanocidal activity was assessed using blood stream trypomastigotes cultures of T. b. brucei and the colorimetric resazurin method. The MTT test was used to assess the cytotoxicity of essential oils on macrophage cells and Selectivity Indexes were calculated. Of the 17 essential oils screened three showed high trypanocidal activity (IC 50  oils had no cytotoxic effects on macrophage cells showing the highest values of Selectivity Index (63.4, 9.0 and 11.8, respectively). The oils of Distichoselinum tenuifolium, Lavandula viridis, Origanum virens, Seseli tortuosom, Syzygium aromaticum, and Thymbra capitata also exhibited activity (IC 50 of 10-25 μg/mL) but showed cytotoxicity on macrophages. Of the nine compounds tested, α-pinene (IC 50 of 2.9 μg/mL) and citral (IC 50 of 18.9 μg/mL) exhibited the highest anti-trypanosomal activities. Citral is likely the active component of C. citratus and α-pinene is responsible for the antitrypanosomal effects of J. oxycedrus. The present work leads us to propose the J. oxycedrus, C. citratus and L. luisieri oils as valuable sources of new molecules for African Sleeping Sickness treatment. Copyright © 2018 Elsevier Inc. All rights reserved.

  19. Understanding the Compositional Variability of the Major Components of Hydrothermal Plumes in the Okinawa Trough

    Zhigang Zeng

    2018-01-01

    Full Text Available Studies of the major components of hydrothermal plumes in seafloor hydrothermal fields are critical for an improved understanding of biogeochemical cycles and the large-scale distribution of elements in the submarine environment. The composition of major components in hydrothermal plume water column samples from 25 stations has been investigated in the middle and southern Okinawa Trough. The physical and chemical properties of hydrothermal plume water in the Okinawa Trough have been affected by input of the Kuroshio current, and its influence on hydrothermal plume water from the southern Okinawa Trough to the middle Okinawa Trough is reduced. The anomalous layers of seawater in the hydrothermal plume water columns have higher K+, Ca2+, Mn2+, B3+, Ca2+/SO42-, and Mn2+/Mg2+ ratios and higher optical anomalies than other layers. The Mg2+, SO42-, Mg2+/Ca2+, and SO42-/Mn2+ ratios of the anomalous layers are lower than other layers in the hydrothermal plume water columns and are consistent with concentrations in hydrothermal vent fluids in the Okinawa Trough. This suggests that the chemical variations of hydrothermal plumes in the Tangyin hydrothermal field, like other hydrothermal fields, result in the discharge of high K+, Ca2+, and B3+ and low Mg2+ and SO42- fluid. Furthermore, element ratios (e.g., Sr2+/Ca2+, Ca2+/Cl− in hydrothermal plume water columns were found to be similar to those in average seawater, indicating that Sr2+/Ca2+ and Ca2+/Cl− ratios of hydrothermal plumes might be useful proxies for chemical properties of seawater. The hydrothermal K+, Ca2+, Mn2+, and B3+ flux to seawater in the Okinawa Trough is about 2.62–873, 1.04–326, 1.30–76.4, and 0.293–34.7 × 106 kg per year, respectively. The heat flux is about 0.159–1,973 × 105 W, which means that roughly 0.0006% of ocean heat is supplied by seafloor hydrothermal plumes in the Okinawa Trough.

  20. Crystal structure of prunin-1, a major component of the almond (Prunus dulcis) allergen amandin.

    Jin, Tengchuan; Albillos, Silvia M; Guo, Feng; Howard, Andrew; Fu, Tong-Jen; Kothary, Mahendra H; Zhang, Yu-Zhu

    2009-09-23

    Seed storage proteins are accumulated during seed development and act as a reserve of nutrition for seed germination and young sprout growth. Plant seeds play an important role in human nutrition by providing a relatively inexpensive source of protein. However, many plant foods contain allergenic proteins, and the number of people suffering from food allergies has increased rapidly in recent years. The 11S globulins are the most widespread seed storage proteins, present in monocotyledonous and dicotyledonous seeds as well as in gymnosperms (conifers) and other spermatophytes. This family of proteins accounts for a number of known major food allergens. They are of interest to both the public and industry due to food safety concerns. Because of the interests in the structural basis of the allergenicity of food allergens, we sought to determine the crystal structure of Pru1, the major component of the 11 S storage protein from almonds. The structure was refined to 2.4 A, and the R/Rfree for the final refined structure is 17.2/22.9. Pru1 is a hexamer made of two trimers. Most of the back-to-back trimer-trimer association was contributed by monomer-monomer interactions. An alpha helix (helix 6) at the C-terminal end of the acidic domain of one of the interacting monomers lies at the cleft of the two protomers. The residues in this helix correspond to a flexible region in the peanut allergen Ara h 3 that encompasses a previously defined linear IgE epitope.

  1. Crystal Structure of Prunin-1, a Major Component of the Almond (Prunus dulcis) Allergen Amandin

    Jin, Tengchuan; Albillos, Silvia M.; Guo, Feng; Howard, Andrew; Fu, Tong-Jen; Kothary, Mahendra H.; Zhang, Yu-Zhu; (IIT); (US-FDA); (IT)

    2010-10-28

    Seed storage proteins are accumulated during seed development and act as a reserve of nutrition for seed germination and young sprout growth. Plant seeds play an important role in human nutrition by providing a relatively inexpensive source of protein. However, many plant foods contain allergenic proteins, and the number of people suffering from food allergies has increased rapidly in recent years. The 11S globulins are the most widespread seed storage proteins, present in monocotyledonous and dicotyledonous seeds as well as in gymnosperms (conifers) and other spermatophytes. This family of proteins accounts for a number of known major food allergens. They are of interest to both the public and industry due to food safety concerns. Because of the interests in the structural basis of the allergenicity of food allergens, we sought to determine the crystal structure of Pru1, the major component of the 11 S storage protein from almonds. The structure was refined to 2.4 {angstrom}, and the R/Rfree for the final refined structure is 17.2/22.9. Pru1 is a hexamer made of two trimers. Most of the back-to-back trimer-trimer association was contributed by monomer-monomer interactions. An {alpha} helix (helix 6) at the C-terminal end of the acidic domain of one of the interacting monomers lies at the cleft of the two protomers. The residues in this helix correspond to a flexible region in the peanut allergen Ara h 3 that encompasses a previously defined linear IgE epitope.

  2. 22 CFR 121.8 - End-items, components, accessories, attachments, parts, firmware, software and systems.

    2010-04-01

    ... an assembled article ready for its intended use. Only ammunition, fuel or another energy source is...-item without which the end-item is inoperable. (Example: Airframes, tail sections, transmissions, tank..., operating systems and support software for design, implementation, test, operation, diagnosis and repair. A...

  3. Evaluation of Solid Rocket Motor Component Data Using a Commercially Available Statistical Software Package

    Stefanski, Philip L.

    2015-01-01

    Commercially available software packages today allow users to quickly perform the routine evaluations of (1) descriptive statistics to numerically and graphically summarize both sample and population data, (2) inferential statistics that draws conclusions about a given population from samples taken of it, (3) probability determinations that can be used to generate estimates of reliability allowables, and finally (4) the setup of designed experiments and analysis of their data to identify significant material and process characteristics for application in both product manufacturing and performance enhancement. This paper presents examples of analysis and experimental design work that has been conducted using Statgraphics®(Registered Trademark) statistical software to obtain useful information with regard to solid rocket motor propellants and internal insulation material. Data were obtained from a number of programs (Shuttle, Constellation, and Space Launch System) and sources that include solid propellant burn rate strands, tensile specimens, sub-scale test motors, full-scale operational motors, rubber insulation specimens, and sub-scale rubber insulation analog samples. Besides facilitating the experimental design process to yield meaningful results, statistical software has demonstrated its ability to quickly perform complex data analyses and yield significant findings that might otherwise have gone unnoticed. One caveat to these successes is that useful results not only derive from the inherent power of the software package, but also from the skill and understanding of the data analyst.

  4. Big rock point restoration project BWR major component removal, packaging and shipping - planning and experience

    Milner, T.; Dam, S.; Papp, M.; Slade, J.; Slimp, B.; Nurden, P.

    2001-01-01

    The Big Rock Point boiling water reactor (BWR) at Charlevoix, MI was permanently shut down on August 29th 1997. In 1999 BNFL Inc.'s Reactor Decommissioning Group (RDG) was awarded a contract by Consumers Energy (CECo) for the Big Rock Point (BRP) Major Component Removal (MCR) project. BNFL Inc. RDG has teamed with MOTA, Sargent and Lundy and MDM Services to plan and execute MCR in support of the facility restoration project. The facility restoration project will be completed by 2005. Key to the success of the project has been the integration of best available demonstrated technology into a robust and responsive project management approach, which places emphasis on safety and quality assurance in achieving project milestones linked to time and cost. To support decommissioning of the BRP MCR activities, a reactor vessel (RV) shipping container is required. Discussed in this paper is the design and fabrication of a 10 CFR Part 71 Type B container necessary to ship the BRP RV. The container to be used for transportation of the RV to the burial site was designed as an Exclusive Use Type B package for shipment and burial at the Barnwell, South Carolina (SC) disposal facility. (author)

  5. On the major ductile fracture methodologies for failure assessment of nuclear reactor components

    Cruz, Julio R.B.; Andrade, Arnaldo H.P. de; Landes, John D.

    1996-01-01

    In structures like nuclear reactor components there is a special concern with the loads that may occur under postulated accident conditions. These loads can cause the stresses to go well beyond the linear elastic limits, requiring the use of ductile fracture mechanics methods to the prediction of the structure behavior. Since the use of numerical methods to apply EPFM concepts is expensive and time consuming, the existence of analytical engineering procedures are of great relevance. The lack of precision in detail, as compared with numerical nonlinear analyses, is compensated by the possibility of quick failure assessments. This is a determinant factor in situations where a systematic evaluation of a large range of geometries and loading conditions is necessary, like in thr application of the Leak-Before-Break (LBB) concept on nuclear piping. This paper outlines four ductile fracture analytical methods, pointing out positive and negative aspects of each one. The objective is to take advantage of this critical review to conceive a new methodology, one that would gather strong points of the major existent methods and would try to eliminate some of their drawbacks. (author)

  6. Dual role of preputial gland secretion and its major components in sex recognition of mice.

    Zhang, Jian-Xu; Liu, Ying-Juan; Zhang, Jin-Hua; Sun, Lixing

    2008-10-20

    This study was aimed at validating the sexual attractiveness of hexadecanol and hexadecyl acetate, two putative pheromone compounds, from preputial gland secretion of mice. These two compounds have been reported to be among the major components of preputial gland secretion in both sexes but higher in quantity in males than females. In this study, we show that castration suppressed the production of the two compounds, further suggesting their association with maleness. Adding preputial gland secretion and the synthetic analogs of the two compounds to castrated male urine at their physiological levels in intact males increased the attractiveness of castrated male urine to female mice, showing that the two compounds were indeed male pheromones. Furthermore, their sexual attractiveness disappeared upon removing the vomeronasal organs (VNOs) from female recipients. Replenishing castrated male urine with preputial gland secretion and the two compounds at their physiological levels in females increased the attractiveness of castrated male urine to males. Such a reversal of sexual attractiveness for hexadecanol and hexadecyl acetate suggests that they had opposing dual effects in sexual attractiveness in a dosage-dependent manner.

  7. Alpinia Essential Oils and Their Major Components against Rhodnius nasutus, a Vector of Chagas Disease

    Thamiris de A. de Souza

    2018-01-01

    Full Text Available Species of the genus Alpinia are widely used by the population and have many described biological activities, including activity against insects. In this paper, we describe the bioactivity of the essential oil of two species of Alpinia genus, A. zerumbet and A. vittata, against Rhodnius nasutus, a vector of Chagas disease. The essential oils of these two species were obtained by hydrodistillation and analyzed by GC-MS. The main constituent of A. zerumbet essential oil (OLALPZER was terpinen-4-ol, which represented 19.7% of the total components identified. In the essential oil of A. vittata (OLALPVIT the monoterpene β-pinene (35.3% was the main constituent. The essential oils and their main constituents were topically applied on R. nasutus fifth-instar nymphs. In the first 10 min of application, OLALPVIT and OLALPZER at 125 μg/mL provoked 73.3% and 83.3% of mortality, respectively. Terpinen-4-ol at 25 μg/mL and β-pinene at 44 μg/mL provoked 100% of mortality. The monitoring of resistant insects showed that both essential oils exhibited antifeedant activity. These results suggest the potential use of A. zerumbet and A. vittata essential oils and their major constituents to control R. nasutus population.

  8. Biogenic non-crystalline U(IV) revealed as major component in uranium ore deposits

    Bhattacharyya, Amrita; Campbell, Kate M.; Kelly, Shelly D.; Roebbert, Yvonne; Weyer, Stefan; Bernier-Latmani, Rizlan; Borch, Thomas

    2017-06-01

    Historically, it is believed that crystalline uraninite, produced via the abiotic reduction of hexavalent uranium (U(VI)) is the dominant reduced U species formed in low-temperature uranium roll-front ore deposits. Here we show that non-crystalline U(IV) generated through biologically mediated U(VI) reduction is the predominant U(IV) species in an undisturbed U roll-front ore deposit in Wyoming, USA. Characterization of U species revealed that the majority (~58-89%) of U is bound as U(IV) to C-containing organic functional groups or inorganic carbonate, while uraninite and U(VI) represent only minor components. The uranium deposit exhibited mostly 238U-enriched isotope signatures, consistent with largely biotic reduction of U(VI) to U(IV). This finding implies that biogenic processes are more important to uranium ore genesis than previously understood. The predominance of a relatively labile form of U(IV) also provides an opportunity for a more economical and environmentally benign mining process, as well as the design of more effective post-mining restoration strategies and human health-risk assessment.

  9. Rubber elongation factor (REF, a major allergen component in Hevea brasiliensis latex has amyloid properties.

    Karine Berthelot

    Full Text Available REF (Hevb1 and SRPP (Hevb3 are two major components of Hevea brasiliensis latex, well known for their allergenic properties. They are obviously taking part in the biosynthesis of natural rubber, but their exact function is still unclear. They could be involved in defense/stress mechanisms after tapping or directly acting on the isoprenoid biosynthetic pathway. The structure of these two proteins is still not described. In this work, it was discovered that REF has amyloid properties, contrary to SRPP. We investigated their structure by CD, TEM, ATR-FTIR and WAXS and neatly showed the presence of β-sheet organized aggregates for REF, whereas SRPP mainly fold as a helical protein. Both proteins are highly hydrophobic but differ in their interaction with lipid monolayers used to mimic the monomembrane surrounding the rubber particles. Ellipsometry experiments showed that REF seems to penetrate deeply into the monolayer and SRPP only binds to the lipid surface. These results could therefore clarify the role of these two paralogous proteins in latex production, either in the coagulation of natural rubber or in stress-related responses. To our knowledge, this is the first report of an amyloid formed from a plant protein. This suggests also the presence of functional amyloid in the plant kingdom.

  10. Integrated Syntactic/Semantic XML Data Validation with a Reusable Software Component

    Golikov, Steven

    2013-01-01

    Data integration is a critical component of enterprise system integration, and XML data validation is the foundation for sound data integration of XML-based information systems. Since B2B e-commerce relies on data validation as one of the critical components for enterprise integration, it is imperative for financial industries and e-commerce…

  11. The migration of femoral components after total hip replacement surgery: accuracy and precision of software-aided measurements

    Decking, J.; Schuetz, U.; Decking, R.; Puhl, W.

    2003-01-01

    Objective: To assess the accuracy and precision of a software-aided system to measure migration of femoral components after total hip replacement (THR) on digitised radiographs. Design and patients: Subsidence and varus-valgus tilt of THR stems within the femur were measured on digitised anteroposterior pelvic radiographs. The measuring software (UMA, GEMED, Germany) relies on bony landmarks and comparability parameters of two consecutive radiographs. Its accuracy and precision were calculated by comparing it with the gold standard in migration measurements, radiostereometric analysis (RSA). Radiographs and corresponding RSA measurements were performed in 60 patients (38-69 years) following cementless THR surgery. Results and conclusions: The UMA software measured the subsidence of the stems with an accuracy of ±2.5 mm and varus-valgus tilt with an accuracy of ±1.8 (95% confidence interval). A good interobserver and intraobserver reliability was calculated with Cronbach's alpha ranging from 0.86 to 0.97. Measuring the subsidence of THR stems within the femur is an important parameter in the diagnosis of implant loosening. Software systems such as UMA improve the accuracy of migration measurements and are easy to use on routinely performed radiographs of operated hip joints. (orig.)

  12. ROSMOD: A Toolsuite for Modeling, Generating, Deploying, and Managing Distributed Real-time Component-based Software using ROS

    Pranav Srinivas Kumar

    2016-09-01

    Full Text Available This paper presents the Robot Operating System Model-driven development tool suite, (ROSMOD an integrated development environment for rapid prototyping component-based software for the Robot Operating System (ROS middleware. ROSMOD is well suited for the design, development and deployment of large-scale distributed applications on embedded devices. We present the various features of ROSMOD including the modeling language, the graphical user interface, code generators, and deployment infrastructure. We demonstrate the utility of this tool with a real-world case study: an Autonomous Ground Support Equipment (AGSE robot that was designed and prototyped using ROSMOD for the NASA Student Launch competition, 2014–2015.

  13. Profiles of Major Suppliers to the Automotive Industry : Vol. 5. Multinational Automotive Parts and Components Suppliers

    1982-08-01

    This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

  14. Profiles of Major Suppliers to the Automotive Industry : Vol. 6. Foreign Automotive Parts and Components Suppliers.

    1982-08-01

    This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

  15. Evaluation of components and systems of RSG-GAS and developing of maintenance evaluation software

    Pane, Jupiter-Sitorus; Kadarusmanto

    2003-01-01

    In order to enhance the evaluation of components and systems, inventarization of failure and repair data has been performed. The evaluation was done by calculating distribution function of failure, failure rate, MTTF, MTTR, and unavailability. The evaluation was comprehend in a code program of SYSCOM-RSG-GAS, that are able to performed statistical analysis, reliability parameters, and Fault Tree Analysis. This paper will describe some results of the program

  16. Integrated Design Software Predicts the Creep Life of Monolithic Ceramic Components

    1996-01-01

    Significant improvements in propulsion and power generation for the next century will require revolutionary advances in high-temperature materials and structural design. Advanced ceramics are candidate materials for these elevated-temperature applications. As design protocols emerge for these material systems, designers must be aware of several innate features, including the degrading ability of ceramics to carry sustained load. Usually, time-dependent failure in ceramics occurs because of two different, delayedfailure mechanisms: slow crack growth and creep rupture. Slow crack growth initiates at a preexisting flaw and continues until a critical crack length is reached, causing catastrophic failure. Creep rupture, on the other hand, occurs because of bulk damage in the material: void nucleation and coalescence that eventually leads to macrocracks which then propagate to failure. Successful application of advanced ceramics depends on proper characterization of material behavior and the use of an appropriate design methodology. The life of a ceramic component can be predicted with the NASA Lewis Research Center's Ceramics Analysis and Reliability Evaluation of Structures (CARES) integrated design programs. CARES/CREEP determines the expected life of a component under creep conditions, and CARES/LIFE predicts the component life due to fast fracture and subcritical crack growth. The previously developed CARES/LIFE program has been used in numerous industrial and Government applications.

  17. WebGL and web audio software lightweight components for multimedia education

    Chang, Xin; Yuksel, Kivanc; Skarbek, Władysław

    2017-08-01

    The paper presents the results of our recent work on development of contemporary computing platform DC2 for multimedia education usingWebGL andWeb Audio { the W3C standards. Using literate programming paradigm the WEBSA educational tools were developed. It offers for a user (student), the access to expandable collection of WEBGL Shaders and web Audio scripts. The unique feature of DC2 is the option of literate programming, offered for both, the author and the reader in order to improve interactivity to lightweightWebGL andWeb Audio components. For instance users can define: source audio nodes including synthetic sources, destination audio nodes, and nodes for audio processing such as: sound wave shaping, spectral band filtering, convolution based modification, etc. In case of WebGL beside of classic graphics effects based on mesh and fractal definitions, the novel image processing analysis by shaders is offered like nonlinear filtering, histogram of gradients, and Bayesian classifiers.

  18. The Software Management Environment (SME)

    Valett, Jon D.; Decker, William; Buell, John

    1988-01-01

    The Software Management Environment (SME) is a research effort designed to utilize the past experiences and results of the Software Engineering Laboratory (SEL) and to incorporate this knowledge into a tool for managing projects. SME provides the software development manager with the ability to observe, compare, predict, analyze, and control key software development parameters such as effort, reliability, and resource utilization. The major components of the SME, the architecture of the system, and examples of the functionality of the tool are discussed.

  19. Innovative Research on the Development of Game-based Tourism Information Services Using Component-based Software Engineering

    Wei-Hsin Huang

    2018-02-01

    Full Text Available In recent years, a number of studies have been conducted exploring the potential of digital tour guides, that is, multimedia components (e.g., 2D graphic, 3D models, and sound effects that can be integrated into digital storytelling with location-based services. This study uses component-based software engineering to develop the content of game-based tourism information services. The results of this study are combined with 3D VR/AR technology to implement the digital 2D/3D interactive tour guide and show all the attractions’ information on a service platform for the gamification of cultural tourism. Nine kinds of game templates have been built in the component module. Five locations have completed indoor or external 3D VR real scenes and provide online visitors with a virtual tour of the indoor or outdoor attractions. The AR interactive work has three logos. The interactive digital guide includes animated tour guides, interactive guided tours, directions and interactive guides. Based on the usage analysis of the component databases built by this study, VR game types are suited to object-oriented game templates, such as the puzzle game template and the treasure hunt game template. Background music is the database component required for each game. The icons and cue tones are the most commonly used components in 2D graphics and sound effects, but the icons are gathered in different directions to approximate the shape of the component to be consistent. This study built a vivid story of a scene tour for online visitors to enhance the interactive digital guide. However, the developer can rapidly build new digital guides by rearranging the components of the modules to shorten the development time by taking advantage of the usage frequency of various databases that have been built by this study to effectively continue to build and expand the database components. Therefore, more game-based digital tour guides can be created to make better defined high

  20. Use of ROOM in the design of data-acquisition software components

    Carena, W; Van de Vyvre, P; Vascotto, Alessandro

    1999-01-01

    Presentation made at the Real Time Conference, Santa Fe, New Mexico 14-18 June 1999The Event Builder and Distribution System (EBDS) is a component of the data-acquisition architecture of the ALICE experiment at CERN. The purpose of the EBDS is to dispatch the sub-events originated in the detector front-end electronics to the processors of the Event Filter Farm, where the full events are assembled.For the design of the EBDS, we use the Real-time Object-Oriented Modelling method (ROOM), which was chosen because of its powerful modelling paradigm, well suited to this type of application. The use of ROOM is aided by the ObecTime Developer tool set, which fully supports the method and covers all the aspects of the development cycle, from analysis to code generation. Fast prototyping and simulation bring a new perspective to the designer, who can advance by gradual refinements.We describe how ROOM has been used to design a model of both the EBDS and its environment, and the results obtained from the simulation. We ...

  1. Acute effects of decaffeinated coffee and the major coffee components chlorogenic acid and trigonelline on glucose tolerance

    van Dijk, A.E.; Olthof, M.R.; Meeuse, J.C.; Seebus, E.; Heine, R.J.; van Dam, R.M.

    2009-01-01

    OBJECTIVE - Coffee consumption has been associated with lower risk of type 2 diabetes. We evaluated the acute effects of decaffeinated coffee and the major coffee components chlorogenic acid and trigonelline on glucose tolerance. RESEARCH DESIGN AND METHODS - We conducted a randomized crossover

  2. THE DISTRIBUTION OF ORGANIC CARBON IN MAJOR COMPONENTS OF FORESTS LOCATED IN FIVE LIFE ZONES OF VENEZUELA

    One of the major uncertainties concerning the role of tropical forests in the global carbon cycle is the lack of adequate data on the carbon content of all their components. The goal of this study was to contribute to filling this data gap by estimating the quantity of carbon in ...

  3. Replacement of major nuclear power plant components for service life extension

    Novak, S.

    1987-01-01

    Problems are discussed associated with replacement of nuclear power plant components with the aim to extend their original scheduled life. The existing foreign experience shows that it is technically feasible to replace practically all basic components for which the necessity of replacement is established. Data is summed up on the replacement of steam generators in US and West German nuclear power plants showing the duration of the job, the total consumption of manhours, the collective dose equivalent and the cost. Attention is also focused on implemented and projected replacements of circulation pipes in nuclear power plants abroad. Based on these figures, the cost is estimated of the replacement of the reactor vessel and the steam generators for WWER-440 nuclear power plants. The conclusion is arrived at that even based on a conservative estimate, the extension by 20 years of the service life of a nuclear power plant is economically more effective than the construction of a new plant. (Z.M.) 2 tabs., 15 refs., 3 figs

  4. Numerical simulation of extraction behavior of major components in the CMPO-TBP-HNO3 system

    Takanashi, M.; Koma, Y.; Koyama, T.; Funasaka, H.

    2000-01-01

    A numerical simulation code was developed in order to find the optimum condition for separation and the recovery of TRU (TRansUranium) elements in the octyl(phenyl)-N,N-di-isobutyl-carbamoyl-methyl-phosphine oxide (CMPO) - tri-butyl phosphate (TBP) - HNO 3 solvent extraction system. This code is able to predict the extraction behavior of americium and europium in the system containing many components. Calculations of concentration profiles of americium and lanthanides were carried out for a counter current experiment with laboratory scale mixer-settlers. The calculated profiles were in agreement with the experimental ones. The effect of oxalic acid was also included in the calculation and was discussed. (authors)

  5. Monitoring aquatic environment pollution : a major component of environment management system part-II

    Khan, I.H.; Khan, M.H.; Sheikh, I.M.

    1999-01-01

    The quality of water suitable for simple disinfection and filtration is presented in this article. Aquatic monitoring requires sampling frequencies along the alignment of surface water bodies. It is necessary to control the industrial effluents discharge in to river and sewers. Unlike wastes from entirely domestic sources, however industrial effluents may contain a very large variety of unnatural components which necessitates greater considerations in setting suitable discharge limits and, perhaps closer surveillance to ensure that standards are met. Several suggestion and example of different types of effluent have been described. All the examples given are sufficiently convincing that Pakistan can learn a great deal from international experiences in environmental pollution to avoid catastrophes. (A.B.)

  6. Rebuilding the foundations: major renovations to the mental health component of an undergraduate nursing curriculum.

    Spence, Deborah; Garrick, Helen; McKay, Marie

    2012-10-01

    Concerns relating to the adequacy of nurses' preparation for the care of people with mental illness prompted significant revision of the mental health component in a Bachelor of Health Science nursing programme in New Zealand that prepares approximately 200 students per year. Working collaboratively with clinical providers, university staff developed and introduced three courses (equivalent to 450 hours of learning) specifically focused on mental health science, inpatient practice, and primary community mental health practice. This paper provides an overview of the new courses and reports the findings of an appreciative inquiry evaluation of this curriculum innovation. © 2012 The Authors. International Journal of Mental Health Nursing © 2012 Australian College of Mental Health Nurses Inc.

  7. Comparison of major and trace components of Chinese and Canadian soils

    Puling Liu; Jervis, R.E.

    1992-01-01

    INAA was used to determine 32 major and trace elements in 21 soil samples collected from the Loess Plateau, China, and Ontario, Canada. The elemental concentrations determined in different layers of each soil, have been used for comparison in order to find out the general characteristics and any significant differences between Canadian and Chinese soils which developed from similar parent materials. This data can be useful to pedologists and geochemists to study the elemental behaviours and the influences of climate and environment on soil formation. Effort is directed to applying a statistical factor pattern recognition method to these soils for possible use in future soil erosion and transport studies in China. From this study, four soil factors were resolved each for the Chinese and Canadian soils. (author) 13 refs.; 2 figs.; 5 tabs

  8. Sensory profile and contribution of major components of aroma in dry red wine quality

    Luisa Costa de Oliveira

    2012-11-01

    Full Text Available This study aimed to determine the sensory profile and main volatile compounds of a set of commercial wines from two major wine regions in Brazil. A total of 28 descriptors were selected by quantitative descriptive analysis, and “red”, “violet”, “pungent aroma”, “vinegary aroma” and “softness” were the most important descriptors in sample discrimination (p<=0.05. 42 volatile aroma compounds were considered relevant for the evaluation of red wine samples. Several acetates and esters that contribute to the pleasant aroma in wines were found in the samples, but other undesirable compounds were also identified: acetic acid and octanoic acid may have contributed to the vinegary and sulphur odors perceived by a trained team.

  9. Assessment and management of ageing of major nuclear power plant components important to safety: PWR vessel internals

    1999-10-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety, which was issued by the IAEA in 1992. The current practices for the assessment of safety margins (fitness-for-service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canada deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), and water moderated, water cooled energy reactors (WWERs) are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues. The guidance reports are directed at technical experts from NPPs and from regulatory, plant design, manufacturing and technical support organizations dealing with specific plant

  10. Fiber tracking: A qualitative and quantitative comparison between four different software tools on the reconstruction of major white matter tracts

    Foteini Christidi

    2016-01-01

    Conclusions: Qualitative comparison of four different DTI software in addition to substantial inter-rater but poor between-software agreement highlight the differences on existing fiber tracking methodologies and several particularities of each WM tract, further supporting the need for further study in both clinical and research settings.

  11. Major advances in testing of dairy products: milk component and dairy product attribute testing.

    Barbano, D M; Lynch, J M

    2006-04-01

    Milk component analysis is relatively unusual in the field of quantitative analytical chemistry because an analytical test result determines the allocation of very large amounts of money between buyers and sellers of milk. Therefore, there is high incentive to develop and refine these methods to achieve a level of analytical performance rarely demanded of most methods or laboratory staff working in analytical chemistry. In the last 25 yr, well-defined statistical methods to characterize and validate analytical method performance combined with significant improvements in both the chemical and instrumental methods have allowed achievement of improved analytical performance for payment testing. A shift from marketing commodity dairy products to the development, manufacture, and marketing of value added dairy foods for specific market segments has created a need for instrumental and sensory approaches and quantitative data to support product development and marketing. Bringing together sensory data from quantitative descriptive analysis and analytical data from gas chromatography olfactometry for identification of odor-active compounds in complex natural dairy foods has enabled the sensory scientist and analytical chemist to work together to improve the consistency and quality of dairy food flavors.

  12. [Medicinal chemistry and pharmacology focused on cannabidiol, a major component of the fiber-type cannabis].

    Takeda, Shuso

    2013-01-01

    Considerable attention has focused on cannabidiol (CBD), a major non-psychotropic constituent of fiber-type cannabis plant, and it has been reported to possess diverse biological activities. Although CBD is obtained from non-enzymatic decarboxylation of its parent molecule, cannabidiolic acid (CBDA), several studies have investigated whether CBDA itself is biologically active. In the present report, the author summarizes findings indicating that; 1) CBDA is a selective cyclooxygenase-2 (COX-2) inhibitor, and ii) CBDA possesses an anti-migrative potential for highly invasive cancer cells, apparently through a mechanism involving inhibition of cAMP-dependent protein kinase A, coupled with an activation of the small GTPase, RhoA. Further, the author introduces recent findings on the medicinal chemistry and pharmacology of the CBD derivative, CBD-2',6'-dimethyl ether (CBDD), that exhibits inhibitory activity toward 15-lipoxygenase (15-LOX), an enzyme responsible for the production of oxidized low-density lipoprotein (LDL). These studies establish CBD as both an important experimental tool and as a lead compound for pharmaceutical development. In this review, the author further discusses the potential uses of CBD and its derivatives in future medicines.

  13. The case for SAR as the major component of a hyperthermia treatment unit

    Scott, R.S.

    1985-01-01

    A major problem facing clinical hyperthermia is the lack of a useful unit of treatment. Most attempts at a treatment unit have utilized some function of temperature and time. Having accepted the validity of such a hypothetical units, one is faced with the formidable problem of obtaining a three dimensional temperature profile so that thermal dose can be determined. A corollary is the desirability of obtaining uniform temperature in the treatment volume. Various studies suggest that a uniform SAR is a more desirable goal when radiotherapy is to be used in combination with hyperthermia. The synergy between radiation and hyperthermia is maximized in low pH regions of tumor which are presumably also hypoxic. These regions are poorly perfused, likely to heat readily, and are resistant to the cytotoxic effects of radiation alone. On the other hand, well perfused regions of tumor are likely sensitive to radiation, and benefit less from the combination treatment. Other studies have definitely shown that tissue temperatures in the range normally associated with desirable hyperthermia treatment result in severe vascular damage. This damage could be expected to unnecessarily compromise the effectiveness of radiotherapy. Models in the literature can be combined to verify these observations

  14. Fish as major carbonate mud producers and missing components of the tropical carbonate factory

    Perry, Chris T.; Salter, Michael A.; Harborne, Alastair R.; Crowley, Stephen F.; Jelks, Howard L.; Wilson, Rod W.

    2011-01-01

    Carbonate mud is a major constituent of recent marine carbonate sediments and of ancient limestones, which contain unique records of changes in ocean chemistry and climate shifts in the geological past. However, the origin of carbonate mud is controversial and often problematic to resolve. Here we show that tropical marine fish produce and excrete various forms of precipitated (nonskeletal) calcium carbonate from their guts ("low" and "high" Mg-calcite and aragonite), but that very fine-grained (mostly 4 mole % MgCO3) are their dominant excretory product. Crystallites from fish are morphologically diverse and species-specific, but all are unique relative to previously known biogenic and abiotic sources of carbonate within open marine systems. Using site specific fish biomass and carbonate excretion rate data we estimate that fish produce ~6.1 x 106 kg CaCO3/year across the Bahamian archipelago, all as mud-grade (the marine carbonate factories function both today and in the past.

  15. Optical absorption and fluorescence spectroscopy studies of Artepillin C, the major component of green propolis

    Camuri, Isamara Julia; Costa, Adriano Batista; Ito, Amando Siuiti; Pazin, Wallance Moreira

    2018-06-01

    The bioactivity of propolis against several pathogens is well established, leading to the extensive consumption of that bee product to prevent diseases. Brazilian green propolis, collected by the species Apis mellifera, is one of the most consumed in the world. The chemical composition of green propolis is complex and it has been shown that it displays antioxidant, antimicrobial, anti-inflammatory and antitumor activities, especially due to the high content of Artepillin C. The molecule is a derivative of cinnamic acid with two prenylated groups, responsible for the improvement of the affinity of the compound for lipophilic environment. A carboxylic group (COOH) is also present in the molecule, making it a pH-sensitive compound and the pH-dependent structure of Artepillin C, may modulate its biological activity related to interactions with the cellular membrane of organisms and tissues. Molecular properties of Artepillin C on aqueous solution were examined by optical absorption, steady state and time-resolved fluorescence spectroscopies. Acid-base titration based on the spectral position of the near UV absorption band, resulted in the pKa value of 4.65 for the carboxylic group in Artepillin C. In acidic pH, below the pKa value, an absorption band raised around 350 nm at Artepillin C concentration above 50 μM, due to aggregation of the molecule. In neutral pH, with excitation at 310 nm, Artepillin C presents dual emission at 400 and 450 nm. In pH close to the pKa, the optical spectra show contribution from both protonated and deprotonated species. A three-exponential function was necessary to fit the intensity decays at the different pHs, dominated by a very short lifetime component, around 0.060 ns. The fast decay resulted in emission before fluorescence depolarization, and in values of fluorescence anisotropy higher than could be expected for monomeric forms of the compound. The results give fundamental knowledge about the protonation-deprotonation state of the

  16. Molecular cloning of human protein 4.2: A major component of the erythrocyte membrane

    Sung, L.A.; Chien, Shu; Lambert, K.; Chang, Longsheng; Bliss, S.A.; Bouhassira, E.E.; Nagel, R.L.; Schwartz, R.S.; Rybicki, A.C.

    1990-01-01

    Protein 4.2 (P4.2) comprises ∼5% of the protein mass of human erythrocyte (RBC) membranes. Anemia occurs in patients with RBCs deficient in P4.2, suggesting a role for this protein in maintaining RBC stability and integrity. The authors now report the molecular cloning and characterization of human RBC P4.2 cDNAs. By immunoscreening a human reticulocyte cDNA library and by using the polymerase chain reaction, two cDNA sequences of 2.4 and 2.5 kilobases (kb) were obtained. These cDNAs differ only by a 90-base-air insert in the longer isoform located three codons downstream from the putative initiation site. The 2.4- and 2.5-kb cDNAs predict proteins of ∼77 and ∼80 kDa, respectively, and the authenticity was confirmed by sequence identity with 46 amino acids of three cyanogen bromide-cleaved peptides of P4.2. Northern blot analysis detected a major 2.4-kb RNA species in reticulocytes. Isolation of two P4.2 cDNAs implies existence of specific regulation of P4.2 expression in human RBCs. Human RBC P4.2 has significant homology with human factor XIII subunit a and guinea pig liver transglutaminase. Sequence alignment of P4.2 with these two transglutaminases, however, revealed that P4.2 lacks the critical cysteine residue required for the enzymatic crosslinking of substrates

  17. Monitoring aquatic environment pollution: a major component of environment management systems

    Khan, I.H.; Khan, M.H.; Sheikh, I.M.

    1999-01-01

    The paper is based on the international experiences mostly of the UK (United Kingdom) and Europe on monitoring aquatic pollution and controlling water pollution which have a long history of the legislation involved. The U.K. control of water pollution and regulatory laws are very effective as in shown by the fact that 96 percent of rivers in England and Wales are suitable for potable supplies with conventional water treatment. Current British legislation is basically contained n the 1951, 1960 and 1974 acts of parliament in the U.K. A common feature of all this environment legislation is the high level of consultation which has taken place between government and all concerned and al those concerned in the development of legislation and drawing up regulations etc. and involved in implementation of them. Similarly considerable discussion takes place with the controlling authorities by dischargers over the detailed implementation of legislation in the U.K. Consequently these harmonious attitudes have been responsible for the effectiveness of the U.K. legislation. In the U.K. control of discharges of industrial effluents to sewers and to all natural waters including underground water is vested in the regional water authorities, which on application, issue consent permitting discharges of industrial effluents to sewers and to all natural waters including underground waters in vested in the regional water authorities, which on application, issue consent permitting discharges to be made subject to conditions and limitations in the consent/authorisation/approval. The paper critically reviews major aspects of the philosophy of aquatic pollution control and monitoring, as statistics reveal deadly state of liquid effluent contamination water bodies in Pakistan. Without prompt installation of treatment plants we may face a tragedy of catastrophic magnitude. (author)

  18. Component resolution reveals additional major allergens in patients with honeybee venom allergy.

    Köhler, Julian; Blank, Simon; Müller, Sabine; Bantleon, Frank; Frick, Marcel; Huss-Marp, Johannes; Lidholm, Jonas; Spillner, Edzard; Jakob, Thilo

    2014-05-01

    Detection of IgE to recombinant Hymenoptera venom allergens has been suggested to improve the diagnostic precision in Hymenoptera venom allergy. However, the frequency of sensitization to the only available recombinant honeybee venom (HBV) allergen, rApi m 1, in patients with HBV allergy is limited, suggesting that additional HBV allergens might be of relevance. We performed an analysis of sensitization profiles of patients with HBV allergy to a panel of HBV allergens. Diagnosis of HBV allergy (n = 144) was based on history, skin test results, and allergen-specific IgE levels to HBV. IgE reactivity to 6 HBV allergens devoid of cross-reactive carbohydrate determinants (CCD) was analyzed by ImmunoCAP. IgE reactivity to rApi m 1, rApi m 2, rApi m 3, nApi m 4, rApi m 5, and rApi m 10 was detected in 72.2%, 47.9%, 50.0%, 22.9%, 58.3%, and 61.8% of the patients with HBV allergy, respectively. Positive results to at least 1 HBV allergen were detected in 94.4%. IgE reactivity to Api m 3, Api m 10, or both was detected in 68.0% and represented the only HBV allergen-specific IgE in 5% of the patients. Limited inhibition of IgE binding by therapeutic HBV and limited induction of Api m 3- and Api m 10-specific IgG4 in patients obtaining immunotherapy supports recent reports on the underrepresentation of these allergens in therapeutic HBV preparations. Analysis of a panel of CCD-free HBV allergens improved diagnostic sensitivity compared with use of rApi m 1 alone, identified additional major allergens, and revealed sensitizations to allergens that have been reported to be absent or underrepresented in therapeutic HBV preparations. Copyright © 2014 The Authors. Published by Mosby, Inc. All rights reserved.

  19. Explorative analysis of major components and isotopes. SDM-Site Forsmark

    Smellie, John (Conterra AB (Sweden)); Tullborg, Eva-Lena (Terralogica AB (Sweden)); Nilsson, Ann-Chatrin (Geosigma AB (Sweden)); Sandstroem, Bjoern (Goeteborg Univ. (Sweden)); Waber, Niklaus (Univ. of Bern (Switzerland)); Gimeno, Maria (Univ. of Zaragoza (Spain)); Gascoyne, Mel (GGP Inc. (United Kingdom))

    2008-09-15

    The overall objectives of the hydrogeochemical description for Forsmark are to establish a detailed understanding of the hydrogeochemical conditions at the site and to develop models that fulfil the needs identified by the safety assessment groups during the site investigation phase. Issues of concern to safety assessment are radionuclide transport and technical barrier behaviour, both of which are dependent on the chemistry of groundwater and pore water and their evolution with time. The work has involved the development of descriptive and mathematical models for groundwaters in relation to rock domains, fracture domains and deformation zones. Past climate events are the major driving force for hydrogeochemical changes and therefore are of fundamental importance for understanding the palaeohydrogeological, palaeohydrogeochemical and present evolution of groundwater in the crystalline bedrock of the Fennoscandian Shield. Understanding current undisturbed hydrochemical conditions at the proposed repository site is important when predicting future changes in groundwater chemistry. The causes behind copper corrosion and/or bentonite degradation are of particular interest as they may jeopardise the long-term integrity of the planned SKB repository system. Thus, the following variables are considered for the hydrogeochemical site descriptive modelling: pH, Eh, sulphur species, iron, manganese, carbonate, phosphate, nitrogen species, total dissolved solids (TDS), isotopes, colloids, fulvic and humic acids and microorganisms. In addition, dissolved gases (e.g. carbon dioxide, methane and hydrogen) are of interest because of their likely participation in microbial reactions. In this series of reports, the final hydrogeochemical evaluation work of the site investigation at the Forsmark site, is presented. The work was conducted by SKB's hydrogeochemical project group, ChemNet, which consists of independent consultants and university researchers with expertise in

  20. Explorative analysis of major components and isotopes. SDM-Site Forsmark

    Smellie, John; Tullborg, Eva-Lena; Nilsson, Ann-Chatrin; Sandstroem, Bjoern; Waber, Niklaus; Gimeno, Maria; Gascoyne, Mel

    2008-09-01

    The overall objectives of the hydrogeochemical description for Forsmark are to establish a detailed understanding of the hydrogeochemical conditions at the site and to develop models that fulfil the needs identified by the safety assessment groups during the site investigation phase. Issues of concern to safety assessment are radionuclide transport and technical barrier behaviour, both of which are dependent on the chemistry of groundwater and pore water and their evolution with time. The work has involved the development of descriptive and mathematical models for groundwaters in relation to rock domains, fracture domains and deformation zones. Past climate events are the major driving force for hydrogeochemical changes and therefore are of fundamental importance for understanding the palaeohydrogeological, palaeohydrogeochemical and present evolution of groundwater in the crystalline bedrock of the Fennoscandian Shield. Understanding current undisturbed hydrochemical conditions at the proposed repository site is important when predicting future changes in groundwater chemistry. The causes behind copper corrosion and/or bentonite degradation are of particular interest as they may jeopardise the long-term integrity of the planned SKB repository system. Thus, the following variables are considered for the hydrogeochemical site descriptive modelling: pH, Eh, sulphur species, iron, manganese, carbonate, phosphate, nitrogen species, total dissolved solids (TDS), isotopes, colloids, fulvic and humic acids and microorganisms. In addition, dissolved gases (e.g. carbon dioxide, methane and hydrogen) are of interest because of their likely participation in microbial reactions. In this series of reports, the final hydrogeochemical evaluation work of the site investigation at the Forsmark site, is presented. The work was conducted by SKB's hydrogeochemical project group, ChemNet, which consists of independent consultants and university researchers with expertise in

  1. Characterization of secondary organic aerosol from photo-oxidation of gasoline exhaust and specific sources of major components.

    Ma, Pengkun; Zhang, Peng; Shu, Jinian; Yang, Bo; Zhang, Haixu

    2018-01-01

    To further explore the composition and distribution of secondary organic aerosol (SOA) components from the photo-oxidation of light aromatic precursors (toluene, m-xylene, and 1,3,5-trimethylbenzene (1,3,5-TMB)) and idling gasoline exhaust, a vacuum ultraviolet photoionization mass spectrometer (VUV-PIMS) was employed. Peaks of the molecular ions of the SOA components with minimum molecular fragmentation were clearly observed from the mass spectra of SOA, through the application of soft ionization methods in VUV-PIMS. The experiments comparing the exhaust-SOA and light aromatic mixture-SOA showed that the observed distributions of almost all the predominant cluster ions in the exhaust-SOA were similar to that of the mixture-SOA. Based on the characterization experiments of SOA formed from individual light aromatic precursors, the SOA components with molecular weights of 98 and 110 amu observed in the exhaust-SOA resulted from the photo-oxidation of toluene and m-xylene; the components with a molecular weight of 124 amu were derived mainly from m-xylene; and the components with molecular weights of 100, 112, 128, 138, and 156 amu were mainly derived from 1,3,5-TMB. These results suggest that C 7 -C 9 light aromatic hydrocarbons are significant SOA precursors and that major SOA components originate from gasoline exhaust. Additionally, some new light aromatic hydrocarbon-SOA components were observed for the first time using VUV-PIMS. The corresponding reaction mechanisms were also proposed in this study to enrich the knowledge base of the formation mechanisms of light aromatic hydrocarbon-SOA compounds. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Assessment and management of ageing of major nuclear power plant components important to safety: CANDU reactor assemblies

    2001-02-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance, design or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must therefore be effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wearout of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety which was issued by the IAEA in 1992. The current practices for the assessment of safety margins (fitness for service) and the inspection, monitoring, and mitigation of ageing degradation of selected components of Canada deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs) including the Soviet designed water moderated and water cooled energy reactors (WWERs), are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age-related licensing issues. Since the reports are written from a safety perspective, they do not address life or life-cycle management of the plant components, which

  3. Assessment and Management of ageing of major nuclear power plant components important to safety: PWR pressure vessels

    1999-10-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (e.g., caused by unanticipated phenomena and by operating, maintenance or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety which was issued by the IAEA in 1992. The current practices for the assessment of safety margins (fitness-for-service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canada deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), including water moderated, water cooled energy reactors (WWERs) are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs; and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues. Since the reports are written from a safety perspective, they do not address life or life-cycle management of the plant components, which involves the integration of

  4. Assessment and management of ageing of major nuclear power plant components important to safety: BWR pressure vessel internals

    2005-10-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (caused for instance by unanticipated phenomena and by operating maintenance or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling, within acceptable limits, the ageing degradation and ware out of components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of guidance reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety, which was issued by the IAEA in 1992. Since the reports are written from a safety perspective, they do not address life or life cycle management of plant components, which involves economic considerations. The current practices for the assessment of safety margins (fitness for service) and the inspection, monitoring and mitigation of ageing degradation of selected components of heavy water moderated reactors (HWRs), boiling water reactors (BWRs), pressurized water reactors (PWRs), and water moderated, water cooled energy reactors (WWERs) are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues

  5. Assessment and management of ageing of major nuclear power plant components important to safety: BWR pressure vessels

    2005-10-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (caused for instance by unanticipated phenomena and by operating, maintenance or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling, within acceptable limits, the ageing degradation and wear out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety, which was issued by the IAEA in 1992. Since the reports are written from a safety perspective, they do not address life or life cycle management of plant components, which involves economic considerations. The current practices for the assessment of safety margins (fitness for service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canada deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), and water moderated, water cooled energy reactors (WWERs) are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues

  6. Assessment and management of ageing of major nuclear power plant components important to safety. Primary piping in PWRs

    2003-07-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (caused for instance by unanticipated phenomena and by operating, maintenance or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must therefore be effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling, within acceptable limits, the ageing degradation and wear out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety, which was issued by the IAEA in 1992. Since the reports are written from a safety perspective, they do not address life or life cycle management of plant components, which involves economic considerations. The current practices for the assessment of safety margins (fitness-for-service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canada deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), and water moderated, water cooled energy reactors (WWERs) are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and to provide a common technical basis for dialogue between plant operators and regulators when dealing with age-related licensing issues. The

  7. Identification of the Major Components of Buddleja officinalis Extract and Their Metabolites in Rat Urine by UHPLC-LTQ-Orbitrap.

    Sun, Mohan; Luo, Zhiqiang; Liu, Yang; Yang, Ruirui; Lu, Lina; Yu, Guohua; Ma, Xiaoyun; Liu, Aoxue; Guo, Yafang; Zhao, Haiyu

    2016-10-01

    Buddleja officinalis Maxim, one of the most popular herbal medicines in China, is widely prescribed for curing eye diseases for centuries. In this study, the major components of B. officinalis extract (BOE) and their metabolites in rat urine were detected and identified by ultra-high-pressure liquid chromatography coupled with linear ion trap-orbitrap tandem mass spectrometry (UHPLC-LTQ-Orbitrap). A total of 19 compounds, including 8 flavonoids and 11 phenylethanoid glycosides, were confirmed or tentatively identified from BOE. In vivo, 33 components, including 3 prototypes and 30 metabolies, were confirmed or tentatively identified in rat urine samples. The metabolic pathways of different types of compounds were also proposed. This study would effectively narrow the range of potentially bioactive constituents of BOE and shed light to its action mechanism. © 2016 Institute of Food Technologists®.

  8. Chemical composition of the major components of PM in different sites at the Metropolitan Region of Chile

    Reyes, F.; Castillo, M. A.; Rubio, M.; Gramsch, E.; Vasquez, Y.; Oyola, P.

    2013-05-01

    Santiago, Chile's capital is one of most polluted megacity (5.5 million of people) of the world. Currently, PM2.5 annual concentration is over 2.2 times the Chilean standard (20 μg/m3). Continuous measurements of non-refractory PM1.0 (sulfate, nitrate, chloride, ammonium and organics aerosols), black carbon, and PM2,5 mass concentration were determined using Aerosol Chemical Speciation Monitor (ACSM, Aerodyne Research, Inc), absorption coefficient monitor (SIMCA, Santiago University) and dustrack monitor (TSI Inc) in order to know the temporal variability of the major components of PM. The measurements were carried out at kerbside, urban background, industrial and mixed residential/industrial locations during year 2012 and -2013. Meteorological data (Relative Humidity, temperature, wind speed, wind direction and precipitations) were obtained from the air quality network operated by the environmental authority. The results show strong correlation with the metropolitan region major sources. Multiple regression analysis indicates that precipitations have a strong impact on PM1.0 soluble components; relative humidity has effects only on chloride, sulfate and black carbon. Chloride concentration decrease when temperature is increasing. The perceptual contribution of each component is similar among all sites. All sites shows that OA (Organics Aerosol) as the major constituent of PM1.0 (>50%), followed of nitrates (>13%). Sulfate could be used to differentiate the industrial site; due to there is a strong impact of SO2 emission. Combustion sources direct impact can be seen at BC contribution at industrial and kerbside site. Also, the OA/BC ratio shows slow value at kerbside (3.05) and industrial (3.26) site, and higher at urban background site (4.15). Aged organics aerosols are majority found at all sites (f43/f44 plot), indicating that regional background is strong in all results. These results will be compared with size distribution measurements available from previous

  9. Identification of Water Quality Significant Parameter with Two Transformation/Standardization Methods on Principal Component Analysis and Scilab Software

    Jovan Putranda

    2016-09-01

    Full Text Available Water quality monitoring is prone to encounter error on its recording or measuring process. The monitoring on river water quality not only aims to recognize the water quality dynamic, but also to evaluate the data to create river management policy and water pollution in order to maintain the continuity of human health or sanitation requirement, and biodiversity preservation. Evaluation on water quality monitoring needs to be started by identifying the important water quality parameter. This research objected to identify the significant parameters by using two transformation or standardization methods on water quality data, which are the river Water Quality Index, WQI (Indeks Kualitas Air, Sungai, IKAs transformation or standardization method and transformation or standardization method with mean 0 and variance 1; so that the variability of water quality parameters could be aggregated with one another. Both of the methods were applied on the water quality monitoring data which its validity and reliability have been tested. The PCA, Principal Component Analysis (Analisa Komponen Utama, AKU, with the help of Scilab software, has been used to process the secondary data on water quality parameters of Gadjah Wong river in 2004-2013, with its validity and reliability has been tested. The Scilab result was cross examined with the result from the Excel-based Biplot Add In software. The research result showed that only 18 from total 35 water quality parameters that have passable data quality. The two transformation or standardization data methods gave different significant parameter type and amount result. On the transformation or standardization mean 0 variances 1, there were water quality significant parameter dynamic to mean concentration of each water quality parameters, which are TDS, SO4, EC, TSS, NO3N, COD, BOD5, Grease Oil and NH3N. On the river WQI transformation or standardization, the water quality significant parameter showed the level of

  10. Assessment and Management of Ageing of Major Nuclear Power Plant Components Important to Safety: Steam Generators. 2011 Update

    2011-11-01

    At present there are over four hundred forty operational nuclear power plants (NPPs) in IAEA Member States. Ageing degradation of the systems, structures of components during their operational life must be effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling, within acceptable limits, the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This IAEA-TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations. The current practices for the assessment of safety margins (fitness for service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canada deuteriumuranium (CANDU) reactor, boiling water reactor (BWR), pressurized water reactor (PWR), and water moderated, water cooled energy reactor (WWER) plants are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues. Since the reports are written from a safety perspective, they do not address life or life cycle management of the plant components, which involves the integration of ageing management and economic planning. The target audience of the reports consists of technical experts from NPPs and from regulatory, plant design, manufacturing and technical support organizations dealing with specific plant components addressed in the reports. The component addressed in the present publication is the steam

  11. Altered expression of γ-secretase components in animal model of major depressive disorder induced by reserpine administration.

    Lee, Hye-Ryun; Hwang, In-Sik; Kim, Ji-Eun; Choi, Sun-Il; Lee, Young-Ju; Goo, Jun-Seo; Lee, Eon-Pil; Choi, Hae-Wook; Kim, Hong-Sung; Lee, Jae-Ho; Jung, Young-Jin; Hwang, Dae-Youn

    2012-06-01

    Altered expression of neurotrophic factors as well as neuroinflammation is commonly associated with Major depressive disorder (MDD) and Alzheimer's disease (AD). To investigate whether or not reserpine-induced MDD affects the expression of AD-related proteins, the expression of γ-secretase components and substrate were measured in brains of ICR mice following reserpine treatment for 15 days. In active avoidance test, total response time and peak slightly increased in the 2 mg/kg reserpine (RSP2)-treated group compared to vehicle-treated group (Pprecursor protein (APP) was enhanced in the RSP1 and RSP2-treated groups compared to the vehicle-treated group, whereas expression of γ-secretase components decreased (P<0.03). Among the three components of the γ-secretase complex, nicastrin protein underwent the largest decrease in expression, as detected by Western blotting (P<0.03). Therefore, the data presented here provide additional evidence about the pathological correlation between MDD and AD.

  12. A Platform for the Development and the Validation of HW IP Components Starting from Reference Software Specifications

    2009-02-01

    Full Text Available Signal processing algorithms become more and more efficient as a result of the developments of new standards. It is particularly true in the field video compression. However, at each improvement in efficiency and functionality, the complexity of the algorithms is also increasing. Textual specifications, that in the past were the original form of specifications, have been substituted by reference software which became the starting point of any design flow leading to implementation. Therefore, designing an embedded application has become equivalent to port a generic software on a, possibly heterogeneous, embedded platform. Such operation is getting more and more difficult because of the increased algorithm complexity and the wide range of architectural solutions. This paper describes a new platform aiming at supporting a step-by-step mapping of reference software (i.e., generic and nonoptimized software into software and hardware implementations. The platform provides a seamless interface between the software and hardware environments with profiling capabilities for the analysis of data transfers between hardware and software. Such profiling capabilities help the designer to achieve different implementations aiming at specific objectives such as the optimization of hardware processing resources, of the memory architectures, or the minimization of data transfers to reach low-power designs.

  13. Computer software design description for the integrated control and data acquisition system LDUA system

    Aftanas, B.L.

    1998-01-01

    This Computer Software Design Description (CSDD) document provides the overview of the software design for all the software that is part of the integrated control and data acquisition system of the Light Duty Utility Arm System (LDUA). It describes the major software components and how they interface. It also references the documents that contain the detailed design description of the components

  14. Component-resolved evaluation of the content of major allergens in therapeutic extracts for specific immunotherapy of honeybee venom allergy

    Blank, Simon; Etzold, Stefanie; Darsow, Ulf

    2017-01-01

    Allergen-specific immunotherapy is the only curative treatment of honeybee venom (HBV) allergy, which is able to protect against further anaphylactic sting reactions. Recent analyses on a molecular level have demonstrated that HBV represents a complex allergen source that contains more relevant...... major allergens than formerly anticipated. Moreover, allergic patients show very diverse sensitization profiles with the different allergens. HBV-specific immunotherapy is conducted with HBV extracts which are derived from pure venom. The allergen content of these therapeutic extracts might differ due...... to natural variations of the source material or different down-stream processing strategies of the manufacturers. Since variations of the allergen content of therapeutic HBV extracts might be associated with therapeutic failure, we adressed the component-resolved allergen composition of different therapeutic...

  15. The proteins of the grape (Vitis vinifera L.) seed endosperm: fractionation and identification of the major components.

    Gazzola, Diana; Vincenzi, Simone; Gastaldon, Luca; Tolin, Serena; Pasini, Gabriella; Curioni, Andrea

    2014-07-15

    In the present study, grape (Vitis vinifera L.) seed endosperm proteins were characterized after sequential fractionation, according to a modified Osborne procedure. The salt-soluble fraction (albumins and globulins) comprised the majority (58.4%) of the total extracted protein. The protein fractions analysed by SDS-PAGE showed similar bands, indicating different solubility of the same protein components. SDS-PAGE in non-reducing and reducing conditions revealed the polypeptide composition of the protein bands. The main polypeptides, which were similar in all the grape varieties analysed, were identified by LC-MS/MS as homologous to the 11S globulin-like seed storage proteins of other plant species, while a monomeric 43 kDa protein presented high homology with the 7S globulins of legume seeds. The results provide new insights about the identity, structure and polypeptide composition of the grape seed storage proteins. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Computer software.

    Rosenthal, L E

    1986-10-01

    Software is the component in a computer system that permits the hardware to perform the various functions that a computer system is capable of doing. The history of software and its development can be traced to the early nineteenth century. All computer systems are designed to utilize the "stored program concept" as first developed by Charles Babbage in the 1850s. The concept was lost until the mid-1940s, when modern computers made their appearance. Today, because of the complex and myriad tasks that a computer system can perform, there has been a differentiation of types of software. There is software designed to perform specific business applications. There is software that controls the overall operation of a computer system. And there is software that is designed to carry out specialized tasks. Regardless of types, software is the most critical component of any computer system. Without it, all one has is a collection of circuits, transistors, and silicone chips.

  17. Pulmonary epithelial response in the rat lung to instilled Montserrat respirable dusts and their major mineral components.

    Housley, D G; Bérubé, K A; Jones, T P; Anderson, S; Pooley, F D; Richards, R J

    2002-07-01

    The Soufriere Hills, a stratovolcano on Montserrat, started erupting in July 1995, producing volcanic ash, both from dome collapse pyroclastic flows and phreatic explosions. The eruptions/ash resuspension result in high concentrations of suspended particulate matter in the atmosphere, which includes cristobalite, a mineral implicated in respiratory disorders. To conduct toxicological studies on characterised samples of ash, together with major components of the dust mixture (anorthite, cristobalite), and a bioreactive mineral control (DQ12 quartz). Rats were challenged with a single mass (1 mg) dose of particles via intratracheal instillation and groups sacrificed at one, three, and nine weeks. Acute bioreactivity of the particles was assessed by increases in lung permeability and inflammation, changes in epithelial cell markers, and increase in the size of bronchothoracic lymph nodes. Data indicated that respirable ash derived from pyroclastic flows (20.1% cristobalite) or phreatic explosion (8.6% cristobalite) had minimal bioreactivity in the lung. Anorthite showed low bioreactivity, in contrast to pure cristobalite, which showed progressive increases in lung damage. Results suggests that either the percentage mass of cristobalite particles present in Montserrat ash was not sufficient as a catalyst in the lung environment, or its surface reactivity was masked by the non-reactive volcanic glass components during the process of ash formation.

  18. Ceftriaxone-associated gallbladder sludge. Identification of calcium-ceftriaxone salt as a major component of gallbladder precipitate

    Park, H.Z.; Lee, S.P.; Schy, A.L.

    1991-01-01

    Ceftriaxone, a third-generation cephalosporin, is partially excreted into bile. With its clinical use, the formation of gallbladder sludge detected by ultrasonography has been reported. Four surgical specimens were examined and no gallstones were found. Instead, fine precipitates of 20-250 microns were present. Microscopically, there was a small number of cholesterol monohydrate crystals and bilirubin granules among an abundant amount of granular-crystalline material that was not morphologically cholesterol monohydrate crystals. The chemical composition of the precipitates (n = 4) was determined. There was a small amount of cholesterol (1.7% +/- 0.8%) and bilirubin (13.9% +/- 0.74%). The major component of the precipitate was a residue. On further analysis using thin-layer chromatography, high-performance liquid chromatography, and electron microprobe analysis, the residue was identified as a calcium salt of ceftriaxone. The residue also had identical crystal morphology and chromatographic elution profile as authentic calcium-ceftriaxone standards. It is concluded that ceftriaxone, after excretion and being concentrated in the gallbladder bile, can form a precipitate. The major constituent has been identified as a ceftriaxone-calcium salt

  19. Preventive effects of a major component of green tea, epigallocathechin-3-gallate, on hepatitis-B virus DNA replication.

    Karamese, Murat; Aydogdu, Sabiha; Karamese, Selina Aksak; Altoparlak, Ulku; Gundogdu, Cemal

    2015-01-01

    Hepatitis B virus infection is one of the major world health problems. Epigallocatechin-3 gallate is the major component of the polyphenolic fraction of green tea and it has an anti-viral, anti-mutagenic, anti- tumorigenic, anti-angiogenic, anti-proliferative, and/or pro-apoptotic effects on mammalian cells. In this study, our aim was to investigate the inhibition of HBV replication by epigallocatechin-3 gallate in the Hep3B2.1-7 hepatocellular carcinoma cell line. HBV-replicating Hep3B2.1-7 cells were used to investigate the preventive effects of epigallocatechin-3 gallate on HBV DNA replication. The expression levels of HBsAg and HBeAg were determined using ELISA. Quantitative real-time-PCR was applied for the determination of the expression level of HBV DNA. Cytotoxicity of epigallocathechin-3-gallate was not observed in the hepatic carcinoma cell line when the dose was lower than 100 μM. The ELISA method demonstrated that epigallocatechin-3 gallate have strong effects on HBsAg and HBeAg levels. Also it was detected by real-time PCR that epigallocatechin-3 gallate could prevent HBV DNA replication. The obtained data pointed out that although the exact mechanism of HBV DNA replication and related diseases remains unclear, epigallocatechin-3 gallate has a potential as an effective anti-HBV agent with low toxicity.

  20. Research of component-based software development approach in RFID field%RFID领域软件构件化开发技术研究

    徐孟娟; 杨威

    2012-01-01

    将软件构件化开发技术应用至RFID领域.基于领域工程的分析方法,对RFID领域内变化性需求进行封装、隔离和抽象,分析出RFID体系架构,提炼出RFID软件构件模型。针对构件的管理,研究了RFID构件的分类方法,提出刻面分类法.并详细描述RFID软件构件分类的刻面及每个刻面的术语空间。%Component-based software development approach had been applied in RFID field in this paper. Based on the analysis method of domain engineering, to encapsulate isolate and abstract the demands within the area of RFID , the RFID software component model had been extracted after its architecture was analyzed. For the management of the component, faceted classification method, a detailed description of the space and each facet terms of RFID software component had been given in the paper.

  1. Converting a major dosimetry service from film to optically stimulated luminescence dosemeters including revision of the 'back-office' software

    Perks, Christopher A.; Faugoin, Stephane; Serise, Bertrand; Prugnaud, Brice; Million, Marc

    2008-01-01

    Full text: In our offices at Fontenay-aux-Roses we provide personal dosimetry for over 100,000 participants. During 2005/6 we transformed our operations from film dosemeters to those using Optically Stimulated Luminescence (InLight (Trade Mark)). The opportunity was taken to fully overhaul our operational procedures and we are currently completely reworking our 'back-office' software support. The change from film to InLight dosimetry has involved: 1) The installation of new readers at our offices in Fontenay-aux Roses; 2) The installation of a physical badge archiving system; 3) Complete revision of the operational flow to optimise the benefits of the new service; 4) Maintenance of our approval to operate a personal dosimetry service in France; 5) Considerable liaison between our office in Fontenay-aux-Roses and our Glenwood, USA, parent company to enable complete integration of the processes; and 6) Maintaining the service throughout the changeover and keeping client satisfaction high. Having changed the physical environment we are now completely renewing the back office software and systems in support of the dosimetry service. This ranges in scope from entering new clients, client support, all aspects of the dosimetry operations and chain of custody of the dosemeters and participants records and reports. This system is being rolled out in sections and it is envisaged that it will be fully implemented at the start of 2008. A key feature is that continuing improvement and the possibility of future developments of our services is in-built into the philosophy of the new back-office system. The nature of the new system, its benefits to our own operations and, in particular, clients will be discussed. (author)

  2. Low-level profiling and MARTE-compatible modeling of software components for real-time systems

    Triantafyllidis, K.; Bondarev, E.; With, de P.H.N.

    2012-01-01

    In this paper, we present a method for (a) profiling of individual components at high accuracy level, (b) modeling of the components with the accurate data obtained from profiling, and (c) model conversion to the MARTE profile. The resulting performance models of individual components are used at

  3. Assessment and management of ageing of major nuclear power plant components important to safety: PWR pressure vessels. 2007 update

    2007-06-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that effective control of the ageing degradation of the major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance or manufacturing errors) is one of the most important issues for plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. IAEA-TECDOC-1120 documented ageing assessment and management practices for pressurized water reactor (PWR) reactor pressure vessels (RPVs) that were current at the time of its finalization in 1997-1998. Safety significant operating events have occurred since the finalization of the TECDOC, e.g. primary water stress corrosion cracking (PWSCC) of Alloy 600 control rod drive mechanism (CRDM) penetrations and boric acid corrosion/wastage of RPV heads, which threatened the integrity of the RPV heads. These events led to new ageing management actions by both NPP operators and regulators. Therefore it was recognized that IAEA-TECDOC-1120 should be updated by incorporating those new events and their countermeasures. The objective of this report is to update IAEA-TECDOC-1120 in order to provide current ageing management guidance for PWR RPVs to all involved in the operation and regulation of PWRs and thus to help ensure PWR RPV integrity in IAEA Member States throughout their entire service life

  4. Assessment and management of ageing of major nuclear power plant components important to safety: PWR vessel internals: 2007 update

    2007-06-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that effective control of the ageing degradation of the major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance or manufacturing errors) is one of the most important issues for plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wearout of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. IAEA-TECDOC-1119 documents ageing assessment and management practices for PWR Reactor Vessel Internals (RVIs) that were current at the time of its finalization in 1997-1998. Safety significant operating events have occurred since the finalization of the TECDOC, e.g. irradiation assisted stress corrosion cracking (IASCC) of baffle-former bolts, which threatened the integrity of the vessel internals. In addition, concern of fretting wear of control rod guide tubes has been raised in Japan. These events led to new ageing management actions by both NPP operators and regulators. Therefore it was recognized that IAEA-TECDOC-1119 should be updated by incorporating those new events and their countermeasures. The objective of this report is to update relevant sections of the existing IAEA-TECDOC- 1119 in order to provide current ageing management guidance for PWR RVIs to all involved in the operation and regulation of PWRs and thus to help ensure PWR safety in IAEA Member States throughout their entire service life

  5. Core component integration tests for the back-end software sub-system in the ATLAS data acquisition and event filter prototype -1 project

    Badescu, E.; Caprini, M.; Niculescu, M.; Radu, A.

    2000-01-01

    The ATLAS data acquisition (DAQ) and Event Filter (EF) prototype -1 project was intended to produce a prototype system for evaluating candidate technologies and architectures for the final ATLAS DAQ system on the LHC accelerator at CERN. Within the prototype project, the back-end sub-system encompasses the software for configuring, controlling and monitoring the DAQ. The back-end sub-system includes core components and detector integration components. The core components provide the basic functionality and had priority in terms of time-scale for development in order to have a baseline sub-system that can be used for integration with the data-flow sub-system and event filter. The following components are considered to be the core of the back-end sub-system: - Configuration databases, describe a large number of parameters of the DAQ system architecture, hardware and software components, running modes and status; - Message reporting system (MRS), allows all software components to report messages to other components in the distributed environment; - Information service (IS) allows the information exchange for software components; - Process manager (PMG), performs basic job control of software components (start, stop, monitoring the status); - Run control (RC), controls the data taking activities by coordinating the operations of the DAQ sub-systems, back-end software and external systems. Performance and scalability tests have been made for individual components. The back-end subsystem integration tests bring together all the core components and several trigger/DAQ/detector integration components to simulate the control and configuration of data taking sessions. For back-end integration tests a test plan was provided. The tests have been done using a shell script that goes through different phases as follows: - starting the back-end server processes to initialize communication services and PMG; - launching configuration specific processes via DAQ supervisor as

  6. Effects of whey protein and its two major protein components on satiety and food intake in normal-weight women.

    Chungchunlam, Sylvia M S; Henare, Sharon J; Ganesh, Siva; Moughan, Paul J

    2017-06-01

    Protein is the most satiating macronutrient and is source dependent, with whey protein thought to be particularly satiating. The purported satiating effect of whey protein may be due to the unique mixture of proteins in whey or to the major constituent individual proteins (β-lactoglobulin and α-lactalbumin). The objective of the study was to compare the effects of isoenergetic (~2100kJ, ~500kcal) preload meals enriched (~50g protein) with either whey protein isolate (WP), β-lactoglobulin (BL) isolate or α-lactalbumin (AL) isolate, on food intake at an ad libitum test meal 120min later and subjective ratings of appetite (hunger, desire to eat, prospective food consumption and fullness) using visual analogue scales (VAS). Twenty adult normal-weight women (mean age 24.2±0.8years; mean BMI 22.7±0.4kg/m 2 ) participated in the study which used a single-blind completely randomised block design, where each subject consumed each of the three preload meals. Energy intake at the ad libitum test meal and total energy intakes (preload+test meal) did not differ between the three preload meals (p>0.05). There were no significant differences observed for the VAS scores and net incremental area under the curve (net iAUC) during the 120min following consumption of the three preload meals for subjective ratings of appetite (p>0.05). The findings show that the satiating effect of whey protein was similar to that of BL or AL individually and suggest that the major whey protein components BL and AL do not mediate the satiating effect of whey protein. The present human trial was registered with the Australian New Zealand Clinical Trials Registry (www.anzctr.org.au) as ACTRN12615000344594. Copyright © 2017 Elsevier Inc. All rights reserved.

  7. Beta-lipotropin is the major component of the plasma opioid response to surgical stress in humans

    Porro, C.A.; Facchinetti, F.; Bertellini, E.; Petraglia, F.; Stacca, R.; Barbieri, G.C.; Genazzani, A.R.

    1987-12-07

    There is growing experimental evidence that beta-endorphin immunoreactivity is raised by surgical stress in patients undergoing general anesthesia. As the assay methods employed to date did not allow to fully discriminate between beta-endorphin and its immediate precursor, beta-lipotropin, the authors have investigated in the present study plasma levels of these two peptides by separating them by chromatography on plasma extracts prior to radioimmunoassay. Beta-lipotropin, but not beta-endorphin, plasma levels were found to be significantly elevated during surgery in the general anesthesia group, while no change was found in either peptide concentration in the spinal one. Cortisol plasma levels also increased significantly 90 minutes after the beginning of surgery. Although the sampling time they adopted may have prevented them from detecting an early peak of beta-endorphin during the first 30 minutes of surgery, the major component of the pituitary opioid response to surgical stress appears to be related to beta-lipotropin. This is in agreement with results of experimental work on various kinds of stress in animals and humans and seems to rule out a role for plasma beta-endorphin in post-operative analgesia. 38 references, 1 figure, 1 table.

  8. Anti-Inflammatory Applications of Melittin, a Major Component of Bee Venom: Detailed Mechanism of Action and Adverse Effects

    Gihyun Lee

    2016-05-01

    Full Text Available Inflammation is a pervasive phenomenon triggered by the innate and adaptive immune systems to maintain homeostasis. The phenomenon normally leads to recovery from infection and healing, but when not properly phased, inflammation may cause immune disorders. Bee venom is a toxin that bees use for their protection from enemies. However, for centuries it has been used in the Orient as an anti-inflammatory medicine for the treatment of chronic inflammatory diseases. Bee venom and its major component, melittin, are potential means of reducing excessive immune responses and provide new alternatives for the control of inflammatory diseases. Recent experimental studies show that the biological functions of melittin could be applied for therapeutic use in vitro and in vivo. Reports verifying the therapeutic effects of melittin are accumulating in the literature, but the cellular mechanism(s of the anti-inflammatory effects of melittin are not fully elucidated. In the present study, we review the current knowledge on the therapeutic effects of melittin and its detailed mechanisms of action against several inflammatory diseases including skin inflammation, neuroinflammation, atherosclerosis, arthritis and liver inflammation, its adverse effects as well as future prospects regarding the use of melittin.

  9. Anti-Inflammatory Applications of Melittin, a Major Component of Bee Venom: Detailed Mechanism of Action and Adverse Effects.

    Lee, Gihyun; Bae, Hyunsu

    2016-05-11

    Inflammation is a pervasive phenomenon triggered by the innate and adaptive immune systems to maintain homeostasis. The phenomenon normally leads to recovery from infection and healing, but when not properly phased, inflammation may cause immune disorders. Bee venom is a toxin that bees use for their protection from enemies. However, for centuries it has been used in the Orient as an anti-inflammatory medicine for the treatment of chronic inflammatory diseases. Bee venom and its major component, melittin, are potential means of reducing excessive immune responses and provide new alternatives for the control of inflammatory diseases. Recent experimental studies show that the biological functions of melittin could be applied for therapeutic use in vitro and in vivo. Reports verifying the therapeutic effects of melittin are accumulating in the literature, but the cellular mechanism(s) of the anti-inflammatory effects of melittin are not fully elucidated. In the present study, we review the current knowledge on the therapeutic effects of melittin and its detailed mechanisms of action against several inflammatory diseases including skin inflammation, neuroinflammation, atherosclerosis, arthritis and liver inflammation, its adverse effects as well as future prospects regarding the use of melittin.

  10. Characterization of the major histopathological components of thyroid nodules using sonographic textural features for clinical diagnosis and management.

    Chen, Shao-Jer; Yu, Sung-Nien; Tzeng, Jeh-En; Chen, Yen-Ting; Chang, Ku-Yaw; Cheng, Kuo-Sheng; Hsiao, Fu-Tsung; Wei, Chang-Kuo

    2009-02-01

    In this study, the characteristic sonographic textural feature that represents the major histopathologic components of the thyroid nodules was objectively quantified to facilitate clinical diagnosis and management. A total of 157 regions-of-interest thyroid ultrasound image was recruited in the study. The sonographic system used was the GE LOGIQ 700), (General Electric Healthcare, Chalfant St. Giles, UK). The parameters affecting image acquisition were kept in the same condition for all lesions. Commonly used texture analysis methods were applied to characterize thyroid ultrasound images. Image features were classified according to the corresponding pathologic findings. To estimate their relevance and performance to classification, ReliefF was used as a feature selector. Among the various textural features, the sum average value derived from co-occurrence matrix can well reflect echogenicity and can effectively differentiate between follicles and fibrosis base thyroid nodules. Fibrosis shows lowest echogenicity and lowest difference sum average value. Enlarged follicles show highest echogenicity and difference sum average values. Papillary cancer or follicular tumors show the difference sum average values and echogenicity between. The rule of thumb for the echogenicity is that the more follicles are mixed in, the higher the echo of the follicular tumor and papillary cancer will be and vice versa for fibrosis mixed. Areas with intermediate and lower echo should address the possibility of follicular or papillary neoplasm mixed with either follicles or fibrosis. These areas provide more cellular information for ultrasound guided aspiration

  11. Component Provider’s and Tool Developer’s Handbook. Central Archive for Reusable Defense Software (CARDS)

    1994-03-25

    metrics [DISA93b]. " The Software Engineering Institute (SET) has developed a domain analysis process (Feature-Oriented Domain Analysis - FODA ) and is...and expresses the range of variability of these decisions. 3.2.2.3 Feature Oriented Domain Analysis Feature Oriented Domain Analysis ( FODA ) is a domain...documents created in this phase. From a purely profit-oriented business point of view, a company may develop its own analysis of a government or commercial

  12. The MyHealthService approach for chronic disease management based on free open source software and low cost components.

    Vognild, Lars K; Burkow, Tatjana M; Luque, Luis Fernandez

    2009-01-01

    In this paper we present an approach to building personal health services, supporting following-up, physical exercising, health education, and psychosocial support for the chronically ill, based on free open source software and low-cost computers, mobile devices, and consumer health and fitness devices. We argue that this will lower the cost of the systems, which is important given the increasing number of people with chronicle diseases and limited healthcare budgets.

  13. Development of real time system imaging software for the protection of plasma facing components(PFCs) in Wendelstein 7-X

    Ali, Adnan; Jakubowski, Marcin; Sunn Pedersen, Thomas; Rodatos, Alexander [Max-Planck-Institute for Plasma Physics, Greifswald (Germany); Greuner, Henri [Max-Planck-Institute for Plasma Physics, Garching (Germany)

    2016-07-01

    One of the main aims of Wendelstein 7-X, an advanced stellarator in Greifswald, is the investigation of quasi-steady state operation of magnetic fusion devices, for which power exhaust is a very important issue. The predominant fraction of the energy lost from the confined plasma region will be removed by 10 so-called island divertors, which can sustain up to 10 MW/Sq-m. In order to protect the divertor elements from overheating and to monitor power deposition onto the divertor elements, 10 state-of-the-art infrared endoscopes will be installed at W7-X and software is under development for real-time analysis of automatic detection of the hot spots and other abnormal events. The pre-defined algorithms designed for early detection of defects e.g. hotspots, surface layers and delaminations during the discharge are being implemented into the software acquiring the images from the infrared cameras and broadcast them to the main Discharge Control System(DCS). This allows for automatic control of the scenario of the discharge in order to assure safe operation of W7-X. The first online tests of the software will soon be performed at GLADIS in Garching.

  14. RNA of Enterococcus faecalis Strain EC-12 Is a Major Component Inducing Interleukin-12 Production from Human Monocytic Cells.

    Ryoichiro Nishibayashi

    Full Text Available Interleukin-12 (IL-12 is an important cytokine for the immunomodulatory effects of lactic acid bacteria (LAB. Using murine immune cells, we previously reported that the RNA of Enterococcus faecalis EC-12, a LAB strain exerting probiotic-like beneficial effects, is the major IL-12-inducing immunogenic component. However, it was recently revealed that bacterial RNA can be a ligand for Toll-like receptor (TLR 13, which is only expressed in mice. Because TLR13 is not expressed in humans, the immuno-stimulatory and -modulatory effects of LAB RNA in human cells should be augmented excluding TLR13 contribution. In experiment 1 of this study, the role of LAB RNA in IL-12 induction in human immune cells was studied using three LAB strains, E.faecalis EC-12, Lactobacillus gasseri JCM5344, and Bifidobacterium breve JCM1192. RNase A treatment of heat-killed LAB significantly decreased the IL-12 production of human peripheral blood mononuclear cells on stimulation, while RNase III treatment revealed virtually no effects. Further, IL-12 production against heat-killed E. faecalis EC-12 was abolished by depleting monocytes. These results demonstrated that single stranded RNA (ssRNA of LAB is a strong inducer of IL-12 production from human monocytes. In experiment 2, major receptor for ssRNA of E. faecalis EC-12 was identified using THP-1 cells, a human monocytic cell line. The type of RNA molecules of E. faecalis EC-12 responsible for IL-12 induction was also identified. IL-12 production induced by the total RNA of E. faecalis EC-12 was significantly reduced by the treatment of siRNA for TLR8 but not for TLR7. Furthermore, both 23S and 16S rRNA, but not mRNA, of E. faecalis EC-12 markedly induced IL-12 production from THP-1 cells. These results suggested that the recognition of ssRNA of E. faecalis EC-12 was mediated by TLR8 and that rRNA was the RNA molecule that exhibited IL-12-inducing ability in human cells.

  15. Principal component analysis of early alcohol, drug and tobacco use with major depressive disorder in US adults.

    Wang, Kesheng; Liu, Ying; Ouedraogo, Youssoufou; Wang, Nianyang; Xie, Xin; Xu, Chun; Luo, Xingguang

    2018-05-01

    Early alcohol, tobacco and drug use prior to 18 years old are comorbid and correlated. This study included 6239 adults with major depressive disorder (MDD) in the past year and 72,010 controls from the combined data of 2013 and 2014 National Survey on Drug Use and Health (NSDUH). To deal with multicollinearity existing among 17 variables related to early alcohol, tobacco and drug use prior to 18 years old, we used principal component analysis (PCA) to infer PC scores and then use weighted multiple logistic regression analyses to estimate the associations of potential factors and PC scores with MDD. The odds ratios (ORs) with 95% confidence intervals (CIs) were estimated. The overall prevalence of MDD was 6.7%. The first four PCs could explain 57% of the total variance. Weighted multiple logistic regression showed that PC 1 (a measure of psychotherapeutic drugs and illicit drugs other than marijuana use), PC 2 (a measure of cocaine and hallucinogens), PC 3 (a measure of early alcohol, cigarettes, and marijuana use), and PC 4 (a measure of cigar, smokeless tobacco use and illicit drugs use) revealed significant associations with MDD (OR = 1.12, 95% CI = 1.08-1.16, OR = 1.08, 95% CI = 1.04-1.12, OR = 1.13, 95% CI = 1.07-1.18, and OR = 1.15, 95% CI = 1.09-1.21, respectively). In conclusion, PCA can be used to reduce the indicators in complex survey data. Early alcohol, tobacco and drug use prior to 18 years old were found to be associated with increased odds of adult MDD. Copyright © 2018 Elsevier Ltd. All rights reserved.

  16. Epigallocatechin gallate (EGCG), a major component of green tea, is a dual phosphoinositide-3-kinase/mTOR inhibitor

    Van Aller, Glenn S.; Carson, Jeff D.; Tang, Wei; Peng, Hao; Zhao, Lin; Copeland, Robert A.; Tummino, Peter J.; Luo, Lusong

    2011-01-01

    Research highlights: → Epigallocatechin-3-gallate (EGCG) is an ATP-competitive inhibitor of PI3K and mTOR with Ki values around 300 nM. → EGCG inhibits cell proliferation and AKT phosphorylation at Ser473 in MDA-MB-231and A549 cells. → Molecular docking studies show that EGCG binds well to the PI3K kinase domain active site. → These results suggest another important molecular mechanism for the anticancer activities of EGCG. -- Abstract: The PI3K signaling pathway is activated in a broad spectrum of human cancers, either directly by genetic mutation or indirectly via activation of receptor tyrosine kinases or inactivation of the PTEN tumor suppressor. The key nodes of this pathway have emerged as important therapeutic targets for the treatment of cancer. In this study, we show that (-)-epigallocatechin-3-gallate (EGCG), a major component of green tea, is an ATP-competitive inhibitor of both phosphoinositide-3-kinase (PI3K) and mammalian target of rapamycin (mTOR) with K i values of 380 and 320 nM respectively. The potency of EGCG against PI3K and mTOR is within physiologically relevant concentrations. In addition, EGCG inhibits cell proliferation and AKT phosphorylation at Ser473 in MDA-MB-231 and A549 cells. Molecular docking studies show that EGCG binds well to the PI3K kinase domain active site, agreeing with the finding that EGCG competes for ATP binding. Our results suggest another important molecular mechanism for the anticancer activities of EGCG.

  17. Automating Software Development Process using Fuzzy Logic

    Marcelloni, Francesco; Aksit, Mehmet; Damiani, Ernesto; Jain, Lakhmi C.; Madravio, Mauro

    2004-01-01

    In this chapter, we aim to highlight how fuzzy logic can be a valid expressive tool to manage the software development process. We characterize a software development method in terms of two major components: artifact types and methodological rules. Classes, attributes, operations, and inheritance

  18. Anti-oxidant activity and major chemical component analyses of twenty-six commercially available essential oils

    Hsiao-Fen Wang

    2017-10-01

    Full Text Available This study analyzed 26 commercially available essential oils and their major chemical components to determine their antioxidant activity levels by measuring their total phenolic content (TPC, reducing power (RP, β-carotene bleaching (BCB activity, trolox equivalent antioxidant capacity (TEAC, and 1,1-diphenyl-2-picrylhydrazyl free radical scavenging (DFRS ability. The clove bud and thyme borneol essential oils had the highest RP, BCB activity levels, and TPC values among the 26 commercial essential oils. Furthermore, of the 26 essential oils, the clove bud and ylang ylang complete essential oils had the highest TEAC values, and the clove bud and jasmine absolute essential oils had the highest DFRS ability. At a concentration of 2.5 mg/mL, the clove bud and thyme borneol essential oils had RP and BCB activity levels of 94.56% ± 0.06% and 24.64% ± 0.03% and 94.58% ± 0.01% and 89.33% ± 0.09%, respectively. At a concentration of 1 mg/mL, the clove bud and thyme borneol essential oils showed TPC values of 220.00 ± 0.01 and 69.05 ± 0.01 mg/g relative to gallic acid equivalents, respectively, and the clove bud and ylang ylang complete essential oils had TEAC values of 809.00 ± 0.01 and 432.33 ± 0.01 μM, respectively. The clove bud and jasmine absolute essential oils showed DFRS abilities of 94.13% ± 0.01% and 78.62% ± 0.01%, respectively. Phenolic compounds of the clove bud, thyme borneol and jasmine absolute essential oils were eugenol (76.08%, thymol (14.36% and carvacrol (12.33%, and eugenol (0.87%, respectively. The phenolic compounds in essential oils were positively correlated with the RP, BCB activity, TPC, TEAC, and DFRS ability.

  19. Anti-oxidant activity and major chemical component analyses of twenty-six commercially available essential oils.

    Wang, Hsiao-Fen; Yih, Kuang-Hway; Yang, Chao-Hsun; Huang, Keh-Feng

    2017-10-01

    This study analyzed 26 commercially available essential oils and their major chemical components to determine their antioxidant activity levels by measuring their total phenolic content (TPC), reducing power (RP), β-carotene bleaching (BCB) activity, trolox equivalent antioxidant capacity (TEAC), and 1,1-diphenyl-2-picrylhydrazyl free radical scavenging (DFRS) ability. The clove bud and thyme borneol essential oils had the highest RP, BCB activity levels, and TPC values among the 26 commercial essential oils. Furthermore, of the 26 essential oils, the clove bud and ylang ylang complete essential oils had the highest TEAC values, and the clove bud and jasmine absolute essential oils had the highest DFRS ability. At a concentration of 2.5 mg/mL, the clove bud and thyme borneol essential oils had RP and BCB activity levels of 94.56% ± 0.06% and 24.64% ± 0.03% and 94.58% ± 0.01% and 89.33% ± 0.09%, respectively. At a concentration of 1 mg/mL, the clove bud and thyme borneol essential oils showed TPC values of 220.00 ± 0.01 and 69.05 ± 0.01 mg/g relative to gallic acid equivalents, respectively, and the clove bud and ylang ylang complete essential oils had TEAC values of 809.00 ± 0.01 and 432.33 ± 0.01 μM, respectively. The clove bud and jasmine absolute essential oils showed DFRS abilities of 94.13% ± 0.01% and 78.62% ± 0.01%, respectively. Phenolic compounds of the clove bud, thyme borneol and jasmine absolute essential oils were eugenol (76.08%), thymol (14.36%) and carvacrol (12.33%), and eugenol (0.87%), respectively. The phenolic compounds in essential oils were positively correlated with the RP, BCB activity, TPC, TEAC, and DFRS ability. Copyright © 2017. Published by Elsevier B.V.

  20. Methods and software tools for agro-ecological evaluation at farm level: the livestock component within the SIPEAA project

    E. Basile

    2010-01-01

    Full Text Available Livestock farms need to adapt to social and economics changes. Often, farmers must take decision in order to: - remain competitive, meanwhile market and public aids change; - reduce impact on environment. Improvement of efficiency seems to be the only way to conciliate these two different needs. Livestock farm are very complex systems involving physical and biologic components.

  1. Use of FPGA to face electronic component obsolescence in software based safety I and C in NPPS

    Hadj, Abdellah; Bach, Julien; Esmenjaud, Claude; Daumas, Frederic; Salauen, Patrick

    2010-01-01

    In order to extend the life time of their Nuclear Power Plants (NPPs), most utilities are looking for ways to implement the renovation of their existing Instrumentation and Control (I and C) systems. When the I and C to modernize is software based, three paths can be considered: - to keep the legacy microprocessor and limit refurbishment to the associated hardware (i.e. the I/O boards, memories and the CPU board itself), - to move to another I and C platform based on another microprocessor, - to move to a non microprocessor based I and C platform. Software based I and C provide strong advantages such as flexibility and ability to implement advanced functions, however the complexity and the decreasing life time of nowadays microprocessors, mainly developed for the needs of the personal computer market, makes difficult their use and licensing for safety digital I and C systems. Solutions based on re-engineering of legacy microprocessors, or use of microprocessors dedicated to critical application need to be considered. In order to share a prospective vision of the future of I and C systems in NPPs, Electricite de France (EDF) Research and Development division and Rolls-Royce have launched a three year cooperation program on the use of the ASIC/FPGA technology in safety I and C systems. The first step of this program addresses the ability of the ASIC/FPGA technology to provide replacement solutions for former microprocessors taking as example the replacement of the Motorola MC6800 microprocessor. This paper presents the development of an IP cloning the Motorola MC6800 microprocessor, suitable for use in the refurbishment of safety I and C equipment based on this microprocessor. (authors)

  2. Profiles of Major Suppliers to the Automotive Industry : Vol. 4. North American Automotive Parts and Components Suppliers

    1982-08-01

    This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

  3. In-depth investigation of enzymatic hydrolysis of biomass wastes based on three major components: Cellulose, hemicellulose and lignin.

    Lin, Lili; Yan, Rong; Liu, Yongqiang; Jiang, Wenju

    2010-11-01

    The artificial biomass based on three biomass components (cellulose, hemicellulose and lignin) were developed on the basis of a simplex-lattice approach. Together with a natural biomass sample, they were employed in enzymatic hydrolysis researches. Different enzyme combines of two commercial enzymes (ACCELLERASE 1500 and OPTIMASH BG) showed a potential to hydrolyze hemicellulose completely. Negligible interactions among the three components were observed, and the used enzyme ACCELLERASE 1500 was proven to be weak lignin-binding. On this basis, a multiple linear-regression equation was established for predicting the reducing sugar yield based on the component proportions in a biomass. The hemicellulose and cellulose in a biomass sample were found to have different contributions in staged hydrolysis at different time periods. Furthermore, the hydrolysis of rice straw was conducted to validate the computation approach through considerations of alkaline solution pretreatment and combined enzymes function, so as to understand better the nature of biomass hydrolysis, from the aspect of three biomass components.

  4. A Cost Analysis of the Decision to Cannibalize Major Components of the Navy's H-60 Helicopters at the Operational Level

    Kowalski, Danny

    2000-01-01

    ... often make a decision to cannibalize without considering the total cost of their decision This thesis examines the costs incurred by an operational H-6O helicopter squadron to cannibalize major...

  5. Antimicrobial activity of essential oils and their components against the three major pathogens of the cultivated button mushroom

    Sokovic, M.; Griensven, van L.J.L.D.

    2006-01-01

    Essential oils of Matricaria chamommilla, Mentha piperita, M. spicata, Lavandula angusti folia, Ocimum basilicum, Thymus vulgaris, Origanum vulgare, Salvia officinalis, Citrus limon and C. aurantium and their components; linalyl acetate, linalool, limonene, ¿-pinene, ß-pinene, 1,8-cineole, camphor,

  6. Integrated pharmacokinetics of major bioactive components in MCAO rats after oral administration of Huang-Lian-Jie-Du-Tang.

    Zhu, Huaxu; Qian, Zhilei; Li, Huan; Guo, Liwei; Pan, Linmei; Zhang, Qichun; Tang, Yuping

    2012-05-07

    Huang-Lian-Jie-Du-Tang (HLJDT, or Oren-gedoku-to in Japanese), an important multi-herb remedy in China and other Asia countries, has been used clinically to treat cerebral ischemia for decades. According to the previous studies we have reported, an HPLC method was developed and validated for determination of berberine, palmatine, baicalin, baicalein and geniposide simultaneously in MCAO rat plasma after administration of HLJDT aqueous extract. A classified integral pharmacokinetic method was put forward after having compared the integrated concentration-time profile with that of single component. An AUC based weighting approach was used for integrated principle. The results indicated the classified integral pharmacokinetic profile of index components from HLJDT could reveal the pharmacokinetic behavior of original components, and was corresponding to the holistic pharmacological effects of anti-ischemia with HLJDT. This study was aimed to explore an approach that could be applied to integrate the pharmacokinetic behavior of different components derived from HLJDT. The integrated pharmacokinetic results also provided more information for further understanding of the clinical cerebrovascular disease in use of HLJDT. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  7. Development and application of analytical methods for the assessment of software-based IC components in German nuclear power plants; Entwicklung und Einsatz von Analysemethoden zur Beurteilung softwarebasierter leittechnischer Einrichtungen in deutschen Kernkraftwerken

    Arians, Robert; Arnold, Simone; Blum, Stefanie; Buchholz, Marcel; Lochthofen, Andre; Quester, Claudia; Sommer, Dagmar

    2015-03-15

    In this report, results and data from examinations concerning software-based I and C components are evaluated. As failure modes of software-based components and failure causes differ fundamentally from non-software-based components, an evaluation of the operating experience of such components was carried out. This evaluation should show whether or not existing approaches for non-software-based components can be directly transferred to software-based components, or if a different approach has to be developed. The state of the art and science was gathered and is described for the national as well as the international situation. To include failures in non-safety systems, events not fulfilling the incident reporting criteria of German authorities were also included in this evaluation. The data provided by licensees of six German NPPs (different Boiling Water Reactors and Pressurized Water Reactors) was recorded for at least 8 years. The software-based components used in the NPPs are identified and their operating experience is analyzed in order to identify relevant failure modes and to establish a knowledge base for future failure rating.

  8. Benzyl isothiocyanate, a major component from the roots of Salvadora persica is highly active against Gram-negative bacteria.

    Abier Sofrata

    Full Text Available Plants produce a number of antimicrobial substances and the roots of the shrub Salvadora persica have been demonstrated to possess antimicrobial activity. Sticks from the roots of S. persica, Miswak sticks, have been used for centuries as a traditional method of cleaning teeth. Diverging reports on the chemical nature and antimicrobial repertoire of the chewing sticks from S. persica led us to explore its antibacterial properties against a panel of pathogenic or commensal bacteria and to identify the antibacterial component/s by methodical chemical characterization. S. persica root essential oil was prepared by steam distillation and solid-phase microextraction was used to sample volatiles released from fresh root. The active compound was identified by gas chromatography-mass spectrometry and antibacterial assays. The antibacterial compound was isolated using medium-pressure liquid chromatography. Transmission electron microscopy was used to visualize the effect on bacterial cells. The main antibacterial component of both S. persica root extracts and volatiles was benzyl isothiocyanate. Root extracts as well as commercial synthetic benzyl isothiocyanate exhibited rapid and strong bactericidal effect against oral pathogens involved in periodontal disease as well as against other Gram-negative bacteria, while Gram-positive bacteria mainly displayed growth inhibition or remained unaffected. The short exposure needed to obtain bactericidal effect implies that the chewing sticks and the essential oil may have a specific role in treatment of periodontal disease in reducing Gram-negative periodontal pathogens. Our results indicate the need for further investigation into the mechanism of the specific killing of Gram-negative bacteria by S. persica root stick extracts and its active component benzyl isothiocyanate.

  9. Effectiveness of a mood management component as an adjunct to a telephone counselling smoking cessation intervention for smokers with a past major depression: a pragmatic randomized controlled trial

    van der Meer, Regina M.; Willemsen, Marc C.; Smit, Filip; Cuijpers, Pim; Schippers, Gerard M.

    2010-01-01

    Aims To assess whether the addition of a mood management component to telephone counselling produces higher abstinence rates in smokers with past major depression and helps to prevent recurrence of depressive symptoms. Design Pragmatic randomized controlled trial with two conditions, with follow-up

  10. Effectiveness of a mood management component as an adjunct to a telephone counselling smoking cessation intervention for smokers with a past major depression: A pragmatic randomized controlled trial

    van der Meer, R.; Willemsen, M.C.; Smit, H.F.E.; Cuijpers, P.; Schippers, G.M.

    2010-01-01

    Aims To assess whether the addition of a mood management component to telephone counselling produces higher abstinence rates in smokers with past major depression and helps to prevent recurrence of depressive symptoms. Design Pragmatic randomized controlled trial with two conditions, with follow-up

  11. Chemosensory responses to the repellent nepeta essential oil and its major component nepetalactone by the yellow fever mosquito, aedes aegypti, a vector of zika virus

    Nepeta essential oil (Neo) (catnip) and its major component, nepetalactone, have long been known to repel insects including mosquitoes. However, the neural mechanisms through which these repellents are detected by mosquitoes, including the yellow fever mosquito Aedes aegypti, an important vector of...

  12. Egg weights, egg component weights, and laying gaps in Great Tits (Parus major) in relation to ambient temperature

    Lessells, C.M.; Dingemanse, N.J.; Both, C.; Blem, C.

    2002-01-01

    We collected 328 freshly laid Great Tit (Parus major) eggs from 38 clutches in 1999 to determine the relationship of whole egg weight, wet yolk weight, wet albumen weight, dry shell weight, and the occurrence of laying gaps with mean ambient temperature in the three days preceding laying, while

  13. Egg weights, egg component weights, and laying gaps in great tits (Parus major) in relation to ambient temperature.

    Lessells, C.M.; Dingemanse, N.J.; Both, C.

    2002-01-01

    We collected 328 freshly laid Great Tit (Parus major) eggs from 38 clutches in 1999 to determine the relationship of whole egg weight, wet yolk weight, wet albumen weight, dry shell weight, and the occurrence of laying gaps with mean ambient temperature in the three days preceding laying, while

  14. Seasonal Contribution of Mineral Dust and Otlher Major Components to Particulate Matter at Two Remote Sites in Central Asia

    Dust storms are significant contributors to ambient levels of particulate matter (PM) in many areas of the world. Central Asia, an area that is relatively understudied in this regard, is anticipated to be affected by dust storms due to its proximity to several major deserts that ...

  15. R PROJECT: SU APLICACIÓN COMO SOFTWARE LIBRE PARA ANÁLISIS EN COMPONENTES PRINCIPALES (R PROJECT: ITS USE AS OPEN SOURCE FOR PRINCIPAL COMPONENTS ANALYSIS

    Bolaños Guerrero Fabricio

    2011-06-01

    Full Text Available Resumen:Este artículo es producto de un proyecto de investigación realizado en colaboración con profesores de la Escuela de Matemáticas de la Universidad de Costa Rica (UCR, para dar a conocer una opción de software estadístico llamado R Project®. Con este paquete es posible hacer Análisis en Componentes Principales (ACP y representar los resultados usando el Plano Principal y el Círculo de Correlaciones, como herramientas para poder realizar una mejor interpretación de los datos de la tabla (individuos y variables. El software R es de distribución libre, su implementación es sencilla y no requiere de mayores recursos informáticos. Dentro de sus diversas aplicaciones está el ACP, que es una herramienta que se utiliza para la interpretación de la información presentada en una tabla de datos cuantitativos; por lo tanto, las personas investigadoras de diferentes áreas tienen una opción económica y sencilla para realizar Análisis de Datos. Se llevan a cabo dos ejemplos de ACP, donde se muestra un posible uso de la herramienta y se dan las instrucciones sobre cómo realizarlo paso a paso.Abstract: This article is a product of a research project made in collaboration with teachers of the Mathematics School of the University of Costa Rica, in order to show an option of statistical software called “R Project®”. With this software, it is possible to do an Analysis in the Principal Components (PCA and to represent the results using the “principal plane” and the “circle of correlations”, as tools to have a better interpretation of the data in the chart (individuals and variables. The software R is for free distribution, its implementation is simple and it does not require great computer resources. Among its diverse applications there is the PCA, which is a tool used to interpret the information showed in a chart with quantitative data; therefore, the researchers of different areas have a cheap and simple option to do a Data

  16. Software engineering

    Sommerville, Ian

    2016-01-01

    For courses in computer science and software engineering The Fundamental Practice of Software Engineering Software Engineering introduces readers to the overwhelmingly important subject of software programming and development. In the past few years, computer systems have come to dominate not just our technological growth, but the foundations of our world's major industries. This text seeks to lay out the fundamental concepts of this huge and continually growing subject area in a clear and comprehensive manner. The Tenth Edition contains new information that highlights various technological updates of recent years, providing readers with highly relevant and current information. Sommerville's experience in system dependability and systems engineering guides the text through a traditional plan-based approach that incorporates some novel agile methods. The text strives to teach the innovators of tomorrow how to create software that will make our world a better, safer, and more advanced place to live.

  17. Gastroprotective activity of essential oil of the Syzygium aromaticum and its major component eugenol in different animal models.

    Santin, José Roberto; Lemos, Marivane; Klein-Júnior, Luiz Carlos; Machado, Isabel Daufenback; Costa, Philipe; de Oliveira, Ana Paula; Tilia, Crislaine; de Souza, Juliana Paula; de Sousa, João Paulo Barreto; Bastos, Jairo Kenupp; de Andrade, Sérgio Faloni

    2011-02-01

    Syzygium aromaticum, a medicinal plant commonly known as clove, is used to treat toothache, respiratory disorders, inflammation, and gastrointestinal disorders. From the flower buds of S. aromaticum, it is possible to obtain an essential oil comprised of a mixture of aliphatic and cyclic volatile terpenes and phenylpropanoids, being eugenol as the main component. The aims of this study were: (1) to extract the essential oil of the flower buds of S. aromaticum, (2) to identify and quantify the main component of the essential oil, and (3) to evaluate its antiulcer activity using different animal models. Assays were performed using the following protocols in rats: indomethacin-induced and ethanol/HCl-induced ulcer model. Both essential oils from S. aromaticum and eugenol displayed antiulcer activities in the rat models of indomethacin- and ethanol-induced ulcer. Studies focusing on the possible mechanisms of gastroprotection were also undertaken using the following experiments: evaluation of gastric secretion by the pylorus-ligated model, determination of mucus in gastric content, participation of nitric oxide (NO) and endogenous sulfhydryl in gastric protection. The results show that there was no significant effect on the volume of gastric juice and total acidity. However, the quantification of free gastric mucus showed that the clove oil and eugenol were capable of significantly enhancing mucus production. With regard to the NO and endogenous sulfhydryls, the results demonstrated that the gastroprotection induced by clove oil and eugenol are not related to the activities of the nitric oxide and endogenous sulfhydryls. No sign of toxicity was observed in the acute toxicity study. In conclusion, the results of this study show that essential oil of S. aromaticum, as well as its main component (eugenol), possesses antiulcer activity. The data suggest that the effectiveness of the essential oil and eugenol is based on its ability to stimulate the synthesis of mucus, an

  18. Assessment and management of ageing of major nuclear power plant components important to safety: Concrete containment buildings

    1998-06-01

    The report presents the results of the Co-ordinated Research Programme (CRP) on the Management of Ageing of Concrete Containment Buildings (CCBs) addressing current practices and techniques for assessing fitness-for-service and the inspection, monitoring and mitigation of ageing degradation of selected components of CANDU reactor, BWR reactor, PWR reactor and WWER plants. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age-related licensing issues

  19. Integrated Lecture and Laboratory Chemistry Components of Science Education Program for Early and Middle Childhood Education Majors

    Lunsford, S. K.

    2004-05-01

    Two new chemistry courses were developed for early childhood and middle childhood education majors. The results of a pre- and posttest in the courses indicate success in developing student content knowledge and ability to problem solve. In addition these courses are designed to develop preservice teachers' understanding of the National Science Education Standards and foster support for implementing these standards in their classrooms. These courses provide materials, resources, and guidance in implementing the standards in their future teaching careers.

  20. Rapidly evolving zona pellucida domain proteins are a major component of the vitelline envelope of abalone eggs

    Aagaard, Jan E.; Yi, Xianhua; MacCoss, Michael J.; Swanson, Willie J.

    2006-01-01

    Proteins harboring a zona pellucida (ZP) domain are prominent components of vertebrate egg coats. Although less well characterized, the egg coat of the non-vertebrate marine gastropod abalone (Haliotis spp.) is also known to contain a ZP domain protein, raising the possibility of a common molecular basis of metazoan egg coat structures. Egg coat proteins from vertebrate as well as non-vertebrate taxa have been shown to evolve under positive selection. Studied most extensively in the abalone system, coevolution between adaptively diverging egg coat and sperm proteins may contribute to the rapid development of reproductive isolation. Thus, identifying the pattern of evolution among egg coat proteins is important in understanding the role these genes may play in the speciation process. The purpose of the present study is to characterize the constituent proteins of the egg coat [vitelline envelope (VE)] of abalone eggs and to provide preliminary evidence regarding how selection has acted on VE proteins during abalone evolution. A proteomic approach is used to match tandem mass spectra of peptides from purified VE proteins with abalone ovary EST sequences, identifying 9 of 10 ZP domain proteins as components of the VE. Maximum likelihood models of codon evolution suggest positive selection has acted among a subset of amino acids for 6 of these genes. This work provides further evidence of the prominence of ZP proteins as constituents of the egg coat, as well as the prominent role of positive selection in diversification of these reproductive proteins. PMID:17085584

  1. Source heterogeneity for the major components of ~3.7 Ga banded iron formations (Isua Greenstone Belt, Western Greenland)

    Frei, Robert; Polat, Ali

    2006-01-01

    of the protocrustal landmass (eNd(3.7 Ga)   + 1.6). The validity of two different and periodically interacting water masses (an essentially two-component mixing system) in the deposition of alternating iron- and silica-rich layers is also reflected by systematic trends in germanium (Ge)/silicon (Si) ratios....... These suggest that significant amounts of silica were derived from unexposed and/or destroyed mafic Hadean landmass, unlike iron which probably originated from oceanic crust following hydrothermal alteration by deep percolating seawater. Ge/Si distributional patterns in the early Archean Isua BIF are similar...... of the depositional environment and to the understanding of depositional mechanisms of these earliest chemical sediments. Rare earth element (REE)-yttrium (Y) patterns of the individual mesobands show features of modern seawater with diagnostic cerium (Ce/Ce ), presodymium (Pr/Pr ) and Y/holmium (Ho) anomalies. Very...

  2. Complement component C1r mediated cleavage of the heavy chain of the major histocompatibility class I antigens

    Eriksson, H; Nissen, Mogens Holst

    1992-01-01

    Apart from cleaving C1s, we demonstrate for the first time that: 1) at concentrations found in serum, the activated forms of the complement components C1r in addition to C1s can cleave the heavy chain of MHC class I antigens, 2) the cleavage by C1r and C1s is seemingly dependent upon a native con......-chain of MHC class I was shown to take place between the alpha 2- and alpha 3- domains as estimated by the Con A-Sepharose precipitation pattern on SDS-PAGE. The alpha 1/alpha 2 fragment was still shown to interact with beta 2-microglobulin as shown by immunoprecipitation....

  3. The major basement membrane components localize to the chondrocyte pericellular matrix--a cartilage basement membrane equivalent?

    Kvist, Alexander J.; Nyström, Alexander; Hultenby, Kjell

    2007-01-01

    In this study, we demonstrate that articular cartilage chondrocytes are surrounded by the defining basement membrane proteins laminin, collagen type IV, nidogen and perlecan, and suggest that these form the functional equivalent of a basement membrane. We found by real-time PCR that mouse...... chondrocytes express these four cardinal components of basement membranes and demonstrated by immunohistochemistry that the proteins are present in bovine and mouse cartilage tissues and are deposited in a thin pericellular structure. Immunoelectron microscopy confirmed high laminin concentration...... becomes less distinct, especially in areas of obvious mechanical attrition. Interestingly, individual laminin subunits were located in different zones of the cartilage, with laminin alpha1 showing preferential localization around a select population of superficial layer chondrocytes. We propose...

  4. Adverse Effects of Hydroalcoholic Extracts and the Major Components in the Stems of Impatiens balsamina L. on Caenorhabditis elegans

    Hong-Fang Jiang

    2017-01-01

    Full Text Available Impatiens balsamina L. (Balsaminaceae, an annual herb found throughout China, has been extensively used in traditional Chinese medicine (TCM. However, our knowledge regarding the adverse effects of I. balsamina in vivo is very limited. In this present study, the nematode Caenorhabditis elegans model was employed to fully assess the adverse effects of hydroalcoholic (EtOH 55% extracts of I. balsamina stems (HAEIBS in vivo. After exposure to 10 mg/mL HAEIBS, the major organism-level endpoints of C. elegans of percent survival, frequency of head thrash and body bends, and reproduction had decreased by 24%, 30%, and 25%, respectively. The lifespan of C. elegans was also greatly reduced after HAEIBS exposure compared to the controls. The active compounds in HAEIBS were separated using high speed countercurrent chromatograph (HSCCC and characterized by high performance liquid chromatography (HPLC and nuclear magnetic resonance (NMR. Two compounds, lawsone and 2-methoxy-1,4-naphthoquinone (MNQ, and their adverse effects were then more thoroughly detailed in this study. It was found that lawsone is the major toxin in HAEIBS with a higher toxicity than MNQ in terms of negative impact on C. elegans mortality, locomotion, reproduction, and lifespan. Our data also suggests that the C. elegans model may be useful for assessing the possible toxicity of other Chinese medicines, plant extracts, and/or compounds.

  5. Gravitational separation of major atmospheric components observed in the stratosphere over Syowa Station, Antarctica, Kiruna, Sweden and Sanriku, Japan.

    Shigeyuki Ishidoya

    2010-12-01

    Full Text Available To investigate the gravitational separation of atmospheric components in the stratosphere, air samples collected using an aircraft during the Arctic Airborne Measurement Program 2002 (AAMP02 were analyzed for the O_2 N_2 ratios (δ(O_2 N_2, δ^N of N_2, δ^O of O_2 and Ar N_2 ratio (δ(Ar N_2. The relationship between observed stratospheric δ^N of N_2, δ^O of O_2 and δ(Ar N_2 over the Svalbard Islands and Barrow showed mass-dependent fractionation of atmospheric components in the stratosphere, which suggested that gravitational separation could be observable in the lowermost stratosphere inside the polar vortex. By examining the rates of change in δ(O_2 Nv and δ^C of CO_2 relative to the CO_2 concentration, such observed correlations were bound to be mainly attributable to upward propagation of their seasonal cycles produced in the troposphere and height-dependent air age as well as gravitational separation in the stratosphere. Air samples collected over Syowa Station, Antarctica, Kiruna, Sweden and Sanriku, Japan using balloon-borne cryogenic air samplers were analyzed for δ^N of Nv and δ^O of O_2. Strength of the gravitational separation was a function of latitude, showing the largest separation inside the polar vortex over Kiruna. It is suggested that information on increase of gravitational separation with height is useful in understanding the vertical transport of air masses in the stratosphere. By comparing the gravitational separations, mean age of air and N_2O concentration at two height intervals with N_2O concentrations > 125 ppb and < 45 ppb, the effect of descending air was found to be more significant over Kiruna than over Syowa Station and Sanriku. The variation in the gravitational separation with height is found to be weaker in the region with N_2O concentrations between 45 and 125 ppb than in other regions, which might suggest that vertical mixing of air occurred in this region.

  6. Pressure-Driven Poiseuille Flow: A Major Component of the Torque-Balance Governing Pacific Plate Motion

    Stotz, I. L.; Iaffaldano, G.; Davies, D. R.

    2018-01-01

    The Pacific Plate is thought to be driven mainly by slab pull, associated with subduction along the Aleutians-Japan, Marianas-Izu-Bonin, and Tonga-Kermadec trenches. This implies that viscous flow within the sub-Pacific asthenosphere is mainly generated by overlying plate motion (i.e., Couette flow) and that the associated shear stresses at the lithosphere's base are resisting such motion. Recent studies on glacial isostatic adjustment and lithosphere dynamics provide tighter constraints on the viscosity and thickness of Earth's asthenosphere and, therefore, on the amount of shear stress that asthenosphere and lithosphere mutually exchange, by virtue of Newton's third law of motion. In light of these constraints, the notion that subduction is the main driver of present-day Pacific Plate motion becomes somewhat unviable, as the pulling force that would be required by slabs exceeds the maximum available from their negative buoyancy. Here we use coupled global models of mantle and lithosphere dynamics to show that the sub-Pacific asthenosphere features a significant component of pressure-driven (i.e., Poiseuille) flow and that this has driven at least 50% of the Pacific Plate motion since, at least, 15 Ma. A corollary of our models is that a sublithospheric pressure difference as high as ±50 MPa is required across the Pacific domain.

  7. Identification and differentiation of major components in three different “Sheng-ma” crude drug species by UPLC/Q-TOF-MS

    Mengxue Fan

    2017-03-01

    Full Text Available Cimicifugae Rhizoma (Sheng ma is a Ranunculaceae herb belonging to a composite family and well known in China. has been widely used in traditional Chinese medicine. The Pharmacopoeia of the People׳s Republic of China contains three varieties (Cimicifuga dahurica (Turcz., Cimicifuga foetida L. and Cimicifuga heracleifolia Kom. which have been used clinically as “Sheng-ma”. However, the chemical constituents of three components of “Sheng-ma” have never been documented. In this study, a rapid method for the analysis of the main components of “Sheng-ma” was developed using ultra-high performance liquid chromatography with quadrupole-time-of-flight mass spectrometry (UPLC/Q-TOF-MS. The present study reveals the major common and distinct chemical constituents of C. dahurica, C. foetida and C. heracleifolia and also reports principal component and statistical analyses of these results. The components were identified by comparing the retention time, accurate mass, mass spectrometric fragmentation characteristic ions and matching empirical molecular formula with that of the published compounds. A total of 32 common components and 8 markers for different “Sheng-ma” components were identified. These findings provide an important basis for the further study and clinical utilities of the three “Sheng-ma” varieties.

  8. A major upgrade of the sediment echosounder ATLAS PARASOUND and the digital acquisition software ParaDigMA for high-resolution sea floor studies

    Gerriets, A.; von Lom-Keil, H.; Spiess, V.; Zwanzig, C.; Bruns, R.

    2003-04-01

    The combination of the ATLAS PARASOUND sediment echosounder, designed by ATLAS Hydrographic, and the digital recording software package ParaDigMA (commercially available as ATLAS PARASTORE-3) for online digitisation, preprocessing and visualisation of recorded seismograms has proven to be a reliable system for high-resolution acoustic sea floor studies. During 10 years of successful operation aboard several research vessels, including R/V Meteor, R/V Sonne and R/V Polarstern, the system has been only slightly modified. Based on this experience, today's PARASOUND/ParaDigMA system has accomplished the step from DOS towards Windows platform and network capability. In cooperation of ATLAS Hydrographic and the Department of Earth Sciences, University of Bremen a major upgrade of the PARASOUND/ParaDigMA system has been developed that adds significant functionality for surveys of sediment structures and sea floor morphology. The innovations primarily concern the control section of the ATLAS PARASOUND echosounder and the ParaDigMA user front end. The previous analogue PARASOUND control terminal has been replaced by a small real time control PC responsible for the control of the echosounder as well as for the continuous digitisation of the data. The control PC communicates via standard network protocols metadata and data with client applications that can display and store the acquired data on different computers on the network. The new network capabilities of the system overcome former limitations and admit a high flexibility with respect to numbers and locations of operator and recording/display PCs. The system now offers a simultaneous parallel registration of the 2.5-5.5kHz parametric signal and the 18kHz NBS signal. This feature in combination with the recording of complete soundings including the entire water column provides the basis for evolving scientific research topics e. g. gas venting. The ParaDigMA recording software now operates on Windows platforms which

  9. Analysis of Major Nutritional Components of Pleurotus pulmonarius During the Cultivation in Different Indoor Environmental Conditions on Sawdust

    Tariqul Islam

    2017-03-01

    Full Text Available Pleurotus pulmonarius was cultivated in three different environmental conditions, in ambient indoor environment (System 1, in humidifying without ventilation (System 2 and in humidifying with ventilation (System 3 to analyse the major nutritional contents. Sawdust was the main substrate for all the cultivation systems. The lowest temperature and the highest optimal humidity were found in System 3. The temperature and humidity had shown statistically significant among the three cultivation Systems. The highest numbers of flushes was found both in System 2 and System 3 but System 1 was produced mushrooms till 3rd flush. About 29.5%, 28.3%, 28.5% protein; 59.0%, 55.8%, 54.3% carbohydrate and 3.8%, 3.5%, 3.3% lipid were found in System 1, System 2 and System 3 respectively. The protein, carbohydrate, and lipid contents were shown statistically insignificant among the cultivation systems. The highest value of protein, carbohydrate and lipid were found for the sample of 1st flush in all the cultivation systems but the values were started to decrease with the increased numbers of flushes significantly. So, this study shown that, although the environmental conditions of the three cultivation systems were varied significantly but the protein, carbohydrate and lipid contents were existed their normal values in all cases but the values were decreased by the increased numbers of flushes.

  10. CD34+ mesenchymal cells are a major component of the intestinal stem cells niche at homeostasis and after injury.

    Stzepourginski, Igor; Nigro, Giulia; Jacob, Jean-Marie; Dulauroy, Sophie; Sansonetti, Philippe J; Eberl, Gérard; Peduto, Lucie

    2017-01-24

    The intestinal epithelium is continuously renewed by intestinal epithelial stem cells (IESCs) positioned at the base of each crypt. Mesenchymal-derived factors are essential to maintain IESCs; however, the cellular composition and development of such mesenchymal niche remains unclear. Here, we identify pericryptal CD34 + Gp38 + αSMA - mesenchymal cells closely associated with Lgr5 + IESCs. We demonstrate that CD34 + Gp38 + cells are the major intestinal producers of the niche factors Wnt2b, Gremlin1, and R-spondin1, and are sufficient to promote maintenance of Lgr5 + IESCs in intestinal organoids, an effect mainly mediated by Gremlin1. CD34 + Gp38 + cells develop after birth in the intestinal submucosa and expand around the crypts during the third week of life in mice, independently of the microbiota. We further show that pericryptal CD34 + gp38 + cells are rapidly activated by intestinal injury, up-regulating niche factors Gremlin1 and R-spondin1 as well as chemokines, proinflammatory cytokines, and growth factors with key roles in gut immunity and tissue repair, including IL-7, Ccl2, Ptgs2, and Amphiregulin. Our results indicate that CD34 + Gp38 + mesenchymal cells are programmed to develop in the intestine after birth to constitute a specialized microenvironment that maintains IESCs at homeostasis and contribute to intestinal inflammation and repair after injury.

  11. 10-Hydroxy-2-decenoic Acid, the Major Lipid Component of Royal Jelly, Extends the Lifespan of Caenorhabditis elegans through Dietary Restriction and Target of Rapamycin Signaling

    Honda, Yoko; Araki, Yoko; Hata, Taketoshi; Ichihara, Kenji; Ito, Masafumi; Tanaka, Masashi; Honda, Shuji

    2015-01-01

    Royal jelly (RJ) produced by honeybees has been reported to possess diverse health-beneficial properties and has been implicated to have a function in longevity across diverse species as well as honeybees. 10-Hydroxy-2-decenoic acid (10-HDA), the major lipid component of RJ produced by honeybees, was previously shown to increase the lifespan of Caenorhabditis elegans. The objective of this study is to elucidate signaling pathways that are involved in the lifespan extension by 10-HDA. 10-HDA f...

  12. Anti-Trichomonas vaginalis properties of the oil of Amomum tsao-ko and its major component, geraniol.

    Dai, Min; Peng, Cheng; Peng, Fu; Xie, Chengbin; Wang, Pinjia; Sun, Fenghui

    2016-01-01

    Trichomonosis, caused by the flagellate protozoan Trichomonas vaginalis, is the most common non-viral sexually transmitted disease (STD) and 5-nitroimidazole drugs are used for the treatment. However, a growing number of T. vaginalis isolates are resistant to these drugs, which make it becomes an urgent issue. The current study was designed to evaluate the anti-T. vaginalis activity of the essential oil from A. tsao-ko used in traditional Chinese medicine and as a spice and its main component, geraniol. The anti-T. vaginalis activities of A. tsao-ko essential oil and geraniol were evaluated by the minimum lethal concentration (MLC) and 50% inhibitory concentration (IC50) in vitro. The morphological changes of T. vaginalis were observed by transmission electron microscopy (TEM). Additionally, sub-MLC concentration treatment with sub-MLC A. tsao-ko essential oil and geraniol was also performed. This study shows that MLC/IC50 of A. tsao-ko essential oil was 44.97 µg/ml/22.49 µg/ml for T. vaginalis isolate Tv1, and 89.93 µg/ml/44.97 µg/ml for T. vaginalis isolate Tv2. Those of geraniol were 342.96 µg/ml/171.48 µg/ml, respectively. After A. tsao-ko essential oil or geraniol treatment, obvious similar morphological changes of T. vaginalis were observed by TEM: the nuclear membrane was damaged, nuclei were dissolved, and the chromatin was accumulated; in the cytoplasm, numerous vacuoles appeared, rough endoplasmic reticulum dilated, the number of ribosomes were reduced, organelles disintegrated, the cell membrane was partially damaged, with cytoplasmic leakage, and cell disintegration was observed. The action time did not increase the effect of A. tsao-ko essential oil or geraniol against T. vaginalis, as no significant difference was observed after sub-MLC concentration treatment for 1, 3, and 5 h with A. tsao-ko essential oil and geraniol. The study describes the first report on the activity and morphological changes of A. tsao-ko essential oil and

  13. Metabolic pathways leading to detoxification of triptolide, a major active component of the herbal medicine Tripterygium wilfordii.

    Du, Fuying; Liu, Zhaohua; Li, Xinxiu; Xing, Jie

    2014-08-01

    Triptolide (TP) shows promising anti-inflammatory and antitumor activity but with severe toxicity. TP is a natural reactive electrophile containing three epoxide groups, which are usually linked to hepatotoxicity via their ability to covalently bind to cellular macromolecules. In this study, metabolic pathways leading to detoxification of TP were evaluated in glutathione (GSH)-depleted (treated with L-buthionine-S,R-sulfoxinine, BSO) and aminobenzotriazole (ABT; a non-specific inhibitor for P450s)-treated mice. The toxicity of TP in mice was evaluated in terms of mortality and levels of serum alanine transaminase (ALT). In incubates with NADPH- and GSH-supplemented liver microsomes, seven GSH conjugates derived from TP were detected. In mice, these hydrolytically unstable GSH conjugates underwent γ-glutamyltranspeptidase/dipeptidases-mediated hydrolysis leading to two major cysteinylglycine conjugates, which underwent further hydrolysis by dipeptidases to form two cysteine conjugates of TP. In ABT-treated mice, the hydroxylated metabolites of TP were found at a lower level than normal mice, and their subsequent conjugated metabolites were not found. The level of cysteinylglycine and cysteine conjugates derived from NADPH-independent metabolism increased in mice treated with both TP and BSO (or ABT), which could be the stress response to toxicity of TP. Compared with normal mice, mortality and ALT levels were significantly higher in TP-treated mice, indicating the toxicity of TP. Pretreatment of ABT increased the toxicity caused by TP, whereas the mortality decreased in GSH-depleted mice. Metabolism by cytochrome P450 enzymes to less reactive metabolites implied a high potential for detoxification of TP. The GSH conjugation pathway also contributed to TP's detoxification in mice. Copyright © 2013 John Wiley & Sons, Ltd.

  14. Gallic Acid Is the Major Active Component of Cortex Moutan in Inhibiting Immune Maturation of Human Monocyte-Derived Dendritic Cells

    Ben Chung Lap Chan

    2015-09-01

    Full Text Available Atopic dermatitis (AD is a widely prevalent and chronically relapsing inflammatory skin disease. Penta Herbs Formula (PHF is efficacious in improving the quality of life and reducing topical corticosteroid used in children with AD and one of the active herbs it contains is Cortex Moutan. Recent studies showed that altered functions of dendritic cells (DC were observed in atopic individuals, suggesting that DC might play a major role in the generation and maintenance of inflammation by their production of pro-inflammatory cytokines. Hence, the aims of the present study were to identify the major active component(s of Cortex Moutan, which might inhibit DC functions and to investigate their possible interactions with conventional corticosteroid on inhibiting the development of DC from monocytes. Monocyte-derived dendritic cells (moDC culture model coupled with the high-speed counter-current chromatography (HSCCC, high pressure liquid chromatography (HPLC and Liquid Chromatography-Mass Spectrometry (LCMS analyses were used. Gallic acid was the major active component from Cortex Moutan which could dose dependently inhibit interleukin (IL-12 p40 and the functional cluster of differentiation (CD surface markers CD40, CD80, CD83 and CD86 expression from cytokine cocktail-activated moDC. Gallic acid could also lower the concentration of hydrocortisone required to inhibit the activation of DC.

  15. Effect of essential oils of Syzygium aromaticum and Cinnamomum zeylanicum and their major components on biofilm production in Staphylococcus aureus strains isolated from milk of cows with mastitis.

    Budri, P E; Silva, N C C; Bonsaglia, E C R; Fernandes Júnior, A; Araújo Júnior, J P; Doyama, J T; Gonçalves, J L; Santos, M V; Fitzgerald-Hughes, D; Rall, V L M

    2015-09-01

    Bovine mastitis is an inflammation of the mammary glands of cows and causes significant economic losses in dairy cattle. Staphylococcus aureus is one of the microorganisms most commonly isolated. Novel agents are required in agricultural industries to prevent the development of mastitis. The production of biofilm by Staph. aureus facilitates the adhesion of bacteria to solid surfaces and contributes to the transmission and maintenance of these bacteria. The effect of the essential oils of Syzygium aromaticum (clove; EOSA) and Cinnamomum zeylanicum (cinnamon; EOCZ) and their major components, eugenol and cinnamaldehyde, on Staph. aureus biofilm formation on different surfaces was investigated. The results showed a significant inhibition of biofilm production by EOSA on polystyrene and stainless steel surfaces (69.4 and 63.6%, respectively). However, its major component, eugenol, was less effective on polystyrene and stainless steel (52.8 and 19.6%, respectively). Both EOCZ and its major component, cinnamaldehyde, significantly reduced biofilm formation on polystyrene (74.7 and 69.6%, respectively) and on stainless steel surfaces (45.3 and 44.9%, respectively). These findings suggest that EOSA, EOCZ, and cinnamaldehyde may be considered for applications such as sanitization in the food industry. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  16. Development of and verification test integral reactor major components - Development of manufacturing process and fabrication of prototype for SG and CEDM

    Lee, Chang Hee; Park, Hwa Kyu; Kim, Yong Kyu; Choi, Yong Soon; Kang, Ki Su; Hyun, Young Min [Korea Heavy Industries and Construction Co., LTD., Changwon (Korea)

    1999-03-01

    Integral SMART(System integrated Modular Advanced Reactor) type reactor is under conceptual design. Because major components is integrated within in a single pressure vessel, compact design using advanced technology is essential. It means that manufacturing process for these components is more complex and difficult. The objective of this study is to confirm the possibility of manufacture of Steam Generator, Control Element Drive Mechanism(CEDM) and Reactor Assembly which includes Reactor Pressure Vessel, it is important to understand the design requirement and function of the major components. After understanding the design requirement and function, it is concluded that the helical bending and weld qualification of titanium tube for Steam Generator and the applicability of electron beam weld for CEDM step motor parts is the critical to fabricate the components. Therefore, bending mock-up and weld qualification of titanium tube was performed and the results are quite satisfactory. Also, it is concluded that electron beam welding technique can be applicable to the CEDM step motor part. (author). 22 refs., 14 figs., 46 tabs.

  17. Development of a web-based aging monitoring system for an integrity evaluation of the major components in a nuclear power plant

    Choi, Jae-Boong; Yeum, Seung-Won; Ko, Han-Ok; Kim, Young-Jin; Kim, Hong-Key; Choi, Young-Hwan; Park, Youn-Won

    2010-01-01

    Structural and mechanical components in a nuclear power plant are designed to operate for its entire service life. Recently, a number of nuclear power plants are being operated beyond their design life to produce more electricity without shutting down. The critical issue in extending a lifetime is to maintain the level of safety during the extended operation period while satisfying the international regulatory standards. However, only a small portion of these components are of great importance for a significant aging degradation which would deeply affect the long-term safety and reliability of the related facilities. Therefore, it is beneficial to build a monitoring system to measure an aging status. While a number of integrity evaluation systems have been developed for NPPs, a real-time aging monitoring system has not been proposed yet . This paper proposes an expert system for the integrity evaluation of nuclear power plants based on a Web-based Reality Environment (WRE). The proposed system provides the integrity assessment for the major mechanical components of a nuclear power plant under concurrent working environments. In the WRE, it is possible for users to understand a mechanical system such as its size, geometry, coupling condition etc. In conclusion, it is anticipated that the proposed system can be used for a more efficient integrity evaluation of the major components subjected to an aging degradation.

  18. Development of a web-based aging monitoring system for an integrity evaluation of the major components in a nuclear power plant

    Choi, Jae-Boong, E-mail: boong33@skku.ed [SAFE Research Centre, School of Mechanical Engineering, Sungkyunkwan University, 300 Chunchun-dong, Jangan-gu, Suwon, Kyonggi-do 440-746 (Korea, Republic of); Yeum, Seung-Won; Ko, Han-Ok; Kim, Young-Jin [SAFE Research Centre, School of Mechanical Engineering, Sungkyunkwan University, 300 Chunchun-dong, Jangan-gu, Suwon, Kyonggi-do 440-746 (Korea, Republic of); Kim, Hong-Key; Choi, Young-Hwan; Park, Youn-Won [Korea Institute of Nuclear Safety, 34 Gwahak-ro, Yusong-ku, Teajon 305-338 (Korea, Republic of)

    2010-01-15

    Structural and mechanical components in a nuclear power plant are designed to operate for its entire service life. Recently, a number of nuclear power plants are being operated beyond their design life to produce more electricity without shutting down. The critical issue in extending a lifetime is to maintain the level of safety during the extended operation period while satisfying the international regulatory standards. However, only a small portion of these components are of great importance for a significant aging degradation which would deeply affect the long-term safety and reliability of the related facilities. Therefore, it is beneficial to build a monitoring system to measure an aging status. While a number of integrity evaluation systems have been developed for NPPs, a real-time aging monitoring system has not been proposed yet . This paper proposes an expert system for the integrity evaluation of nuclear power plants based on a Web-based Reality Environment (WRE). The proposed system provides the integrity assessment for the major mechanical components of a nuclear power plant under concurrent working environments. In the WRE, it is possible for users to understand a mechanical system such as its size, geometry, coupling condition etc. In conclusion, it is anticipated that the proposed system can be used for a more efficient integrity evaluation of the major components subjected to an aging degradation.

  19. SOFTWARE IN TOURISM INDUSTRY : A Study On Emerging New Niches Of Software In Hotel Industry

    Regmi, Krishna Kumar; Thapa, Bikesh

    2010-01-01

    This study was structured as a part of Bachelor Degree thesis in Tourism Degree Programme in Laurea University of Applied Sciences. The study examines the role of software as a major component of ICTs (Information and Communication Technologies) in hotel industry in Finland. The study was conducted in three major hotel chains in Finland in order to identify the scope and possibility of developing new software module within the periphery of contemporary Property Management Systems (PMS). Marke...

  20. GENII Version 2 Software Design Document

    Napier, Bruce A.; Strenge, Dennis L.; Ramsdell, James V.; Eslinger, Paul W.; Fosmire, Christian J.

    2004-03-08

    This document describes the architectural design for the GENII-V2 software package. This document defines details of the overall structure of the software, the major software components, their data file interfaces, and specific mathematical models to be used. The design represents a translation of the requirements into a description of the software structure, software components, interfaces, and necessary data. The design focuses on the major components and data communication links that are key to the implementation of the software within the operating framework. The purpose of the GENII-V2 software package is to provide the capability to perform dose and risk assessments of environmental releases of radionuclides. The software also has the capability of calculating environmental accumulation and radiation doses from surface water, groundwater, and soil (buried waste) media when an input concentration of radionuclide in these media is provided. This report represents a detailed description of the capabilities of the software product with exact specifications of mathematical models that form the basis for the software implementation and testing efforts. This report also presents a detailed description of the overall structure of the software package, details of main components (implemented in the current phase of work), details of data communication files, and content of basic output reports. The GENII system includes the capabilities for calculating radiation doses following chronic and acute releases. Radionuclide transport via air, water, or biological activity may be considered. Air transport options include both puff and plume models, each allow use of an effective stack height or calculation of plume rise from buoyant or momentum effects (or both). Building wake effects can be included in acute atmospheric release scenarios. The code provides risk estimates for health effects to individuals or populations; these can be obtained using the code by applying

  1. Hair Regenerative Mechanisms of Red Ginseng Oil and Its Major Components in the Testosterone-Induced Delay of Anagen Entry in C57BL/6 Mice

    Van-Long Truong

    2017-09-01

    Full Text Available Hair loss (alopecia is a universal problem for numerous people in the world. The present study was conducted to investigate the effects of red ginseng oil (RGO and its major components on hair re-growth using testosterone (TES-induced delay of anagen entry in C57BL/6 mice and their mechanisms of action. Seven-week-old C57BL/6 mice were daily treated with TES for 1 h prior to topical application of 10% RGO, 1% linoleic acid (LA, 1% β-sitosterol (SITOS, or 1% bicyclo(10.1.0tridec-1-ene (BICYCLO once a day for 28 days. Hair regenerative capacity was significantly restored by treatment of RGO and its major compounds in the TES-treated mice. Histological analysis showed that RGO along with LA and SITOS but not BICYCLO promoted hair growth through early inducing anagen phase that was delayed by TES in mice. Treatment of mice with RGO, LA, or SITOS up-regulated Wnt/β-catenin and Shh/Gli pathways-mediated expression of genes such as β-catenin, Lef-1, Sonic hedgehog, Smoothened, Gli-1, Cyclin D1, and Cyclin E in the TES-treated mice. In addition, RGO and its major components reduced the protein level of TGF-β but enhanced the expression of anti-apoptotic protein Bcl-2. These results suggest that RGO is a potent novel therapeutic natural product for treatment of androgenic alopecia possibly through hair re-growth activity of its major components such as LA and SITOS.

  2. Hair Regenerative Mechanisms of Red Ginseng Oil and Its Major Components in the Testosterone-Induced Delay of Anagen Entry in C57BL/6 Mice.

    Truong, Van-Long; Bak, Min Ji; Lee, Changook; Jun, Mira; Jeong, Woo-Sik

    2017-09-08

    Hair loss (alopecia) is a universal problem for numerous people in the world. The present study was conducted to investigate the effects of red ginseng oil (RGO) and its major components on hair re-growth using testosterone (TES)-induced delay of anagen entry in C57BL/6 mice and their mechanisms of action. Seven-week-old C57BL/6 mice were daily treated with TES for 1 h prior to topical application of 10% RGO, 1% linoleic acid (LA), 1% β-sitosterol (SITOS), or 1% bicyclo(10.1.0)tridec-1-ene (BICYCLO) once a day for 28 days. Hair regenerative capacity was significantly restored by treatment of RGO and its major compounds in the TES-treated mice. Histological analysis showed that RGO along with LA and SITOS but not BICYCLO promoted hair growth through early inducing anagen phase that was delayed by TES in mice. Treatment of mice with RGO, LA, or SITOS up-regulated Wnt/β-catenin and Shh/Gli pathways-mediated expression of genes such as β-catenin, Lef-1, Sonic hedgehog, Smoothened, Gli-1, Cyclin D1, and Cyclin E in the TES-treated mice. In addition, RGO and its major components reduced the protein level of TGF-β but enhanced the expression of anti-apoptotic protein Bcl-2. These results suggest that RGO is a potent novel therapeutic natural product for treatment of androgenic alopecia possibly through hair re-growth activity of its major components such as LA and SITOS.

  3. Characterization of PM2.5 and the major chemical components during a 1-year campaign in rural Guangzhou, Southern China

    Lai, Senchao; Zhao, Yan; Ding, Aijun; Zhang, Yingyi; Song, Tianli; Zheng, Junyu; Ho, Kin Fai; Lee, Shun-cheng; Zhong, Liuju

    2016-01-01

    A 1-year campaign was conducted in the rural area of Guangzhou, a megacity in southern China, to collect fine particulate matter (PM2.5) from March 2012 to February 2013. The mass concentrations of PM2.5 and the major chemical components including 6 water-soluble ions, organic carbon (OC), elemental carbon (EC), and 13 additional elements were measured. The annual average concentration of PM2.5 was 44.2 ± 25.8 μg/m3. Sulfate was the most dominant component, accounting for 28.6% of PM2.5, followed by organic matter (21.9%). Both sea salt and crustal material accounted for only a small fraction of PM2.5 (burning. Two high-PM2.5 case studies show that both local and long-range transport can play important roles in the PM2.5 elevation episode.

  4. Risk of metabolic syndrome and its components in people with schizophrenia and related psychotic disorders, bipolar disorder and major depressive disorder: a systematic review and meta-analysis.

    Vancampfort, Davy; Stubbs, Brendon; Mitchell, Alex J; De Hert, Marc; Wampers, Martien; Ward, Philip B; Rosenbaum, Simon; Correll, Christoph U

    2015-10-01

    Metabolic syndrome (MetS) and its components are highly predictive of cardiovascular diseases. The primary aim of this systematic review and meta-analysis was to assess the prevalence of MetS and its components in people with schizophrenia and related psychotic disorders, bipolar disorder and major depressive disorder, comparing subjects with different disorders and taking into account demographic variables and psychotropic medication use. The secondary aim was to compare the MetS prevalence in persons with any of the selected disorders versus matched general population controls. The pooled MetS prevalence in people with severe mental illness was 32.6% (95% CI: 30.8%-34.4%; N = 198; n = 52,678). Relative risk meta-analyses established that there was no significant difference in MetS prevalence in studies directly comparing schizophrenia versus bipolar disorder, and in those directly comparing bipolar disorder versus major depressive disorder. Only two studies directly compared people with schizophrenia and major depressive disorder, precluding meta-analytic calculations. Older age and a higher body mass index were significant moderators in the final demographic regression model (z = -3.6, p = 0.0003, r(2)  = 0.19). People treated with all individual antipsychotic medications had a significantly (ppeople with severe mental illness had a significantly increased risk for MetS (RR = 1.58; 95% CI: 1.35-1.86; p<0.001) and all its components, except for hypertension (p = 0.07). These data suggest that the risk for MetS is similarly elevated in the diagnostic subgroups of severe mental illness. Routine screening and multidisciplinary management of medical and behavioral conditions is needed in these patients. Risks of individual antipsychotics should be considered when making treatment choices. © 2015 World Psychiatric Association.

  5. Software Authentication

    Wolford, J.K.; Geelhood, B.D.; Hamilton, V.A.; Ingraham, J.; MacArthur, D.W.; Mitchell, D.J.; Mullens, J.A.; Vanier, P. E.; White, G.K.; Whiteson, R.

    2001-01-01

    The effort to define guidance for authentication of software for arms control and nuclear material transparency measurements draws on a variety of disciplines and has involved synthesizing established criteria and practices with newer methods. Challenges include the need to protect classified information that the software manipulates as well as deal with the rapid pace of innovation in the technology of nuclear material monitoring. The resulting guidance will shape the design of future systems and inform the process of authentication of instruments now being developed. This paper explores the technical issues underlying the guidance and presents its major tenets

  6. Package-based software development

    Jonge, de M.; Chroust, G.; Hofer, C.

    2003-01-01

    The main goal of component-based software engineering is to decrease development time and development costs of software systems, by reusing prefabricated building blocks. Here we focus on software reuse within the implementation of such component-based applications, and on the corresponding software

  7. Synergism Effect of the Essential Oil from Ocimum basilicum var. Maria Bonita and Its Major Components with Fluconazole and Its Influence on Ergosterol Biosynthesis

    Cardoso, Nathalia N. R.; Alviano, Celuta S.; Blank, Arie F.; Romanos, Maria Teresa V.; Fonseca, Beatriz B.; Rozental, Sonia; Rodrigues, Igor A.; Alviano, Daniela S.

    2016-01-01

    The aim of this study was to evaluate the activity of the EO and its major components of Ocimum basilicum var. Maria Bonita, a genetically improved cultivar, against the fluconazole sensitive and resistant strains of Candida albicans and Cryptococcus neoformans. Geraniol presented better results than the EO, with a low MIC (76 μg/mL against C. neoformans and 152 μg/mL against both Candida strains). The combination of EO, linalool, or geraniol with fluconazole enhanced their antifungal activity, especially against the resistant strain (MIC reduced to 156, 197, and 38 μg/mL, resp.). The ergosterol assay showed that subinhibitory concentrations of the substances were able to reduce the amount of sterol extracted. The substances tested were able to reduce the capsule size which suggests they have an important mechanism of action. Transmission electron microscopy demonstrated cell wall destruction of C. neoformans after treatment with subinhibitory concentrations. In C. albicans ultrastructure alterations such as irregularities in the membrane, presence of vesicles, and cell wall thickening were observed. The biofilm formation was inhibited in both C. albicans strains at MIC and twice MIC. These results provide further support for the use of O. basilicum EO and its major components as a potential source of antifungal agents. PMID:27274752

  8. Oviposition Deterrent and Larvicidal and Pupaecidal Activity of Seven Essential Oils and their Major Components against Culex quinquefasciatus Say (Diptera: Culicidae): Synergism–antagonism Effects

    Andrade-Ochoa, Sergio; Sánchez-Aldana, Daniela; Chacón-Vargas, Karla Fabiola; Rivera-Chavira, Blanca E.; Camacho, Alejandro D.; Nogueda-Torres, Benjamín

    2018-01-01

    The larvicidal activity of essential oils cinnamon (Cinnamomum verum J. Presl), Mexican lime (Citrus aurantifolia Swingle) cumin (Cuminum cyminum Linnaeus), clove (Syzygium aromaticum (L.) Merr. & L.M.Perry), laurel (Laurus nobilis Linnaeus), Mexican oregano (Lippia berlandieri Schauer) and anise (Pimpinella anisum Linnaeus)) and their major components are tested against larvae and pupae of Culex quinquefasciatus Say. Third instar larvae and pupae are used for determination of lethality and mortality. Essential oils with more than 90% mortality after a 30-min treatment are evaluated at different time intervals. Of the essential oils tested, anise and Mexican oregano are effective against larvae, with a median lethal concentration (LC50) of 4.7 and 6.5 µg/mL, respectively. Anise essential oil and t-anethole are effective against pupae, with LC50 values of 102 and 48.7 µg/mL, respectively. Oregano essential oil and carvacrol also have relevant activities. A kinetic analysis of the larvicidal activity, the oviposition deterrent effect and assays of the effects of the binary mixtures of chemical components are undertaken. Results show that anethole has synergistic effects with other constituents. This same effect is observed for carvacrol and thymol. Limonene shows antagonistic effect with β-pinene. The high larvicidal and pupaecidal activities of essential oils and its components demonstrate that they can be potential substitutes for chemical compounds used in mosquitoes control programs. PMID:29443951

  9. Software reengineering

    Fridge, Ernest M., III

    1991-01-01

    Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. JSC created a significant set of tools to develop and maintain FORTRAN and C code during development of the Space Shuttle. This tool set forms the basis for an integrated environment to re-engineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. A beta vision of the environment was released in Mar. 1991. The commercial potential for such re-engineering tools is very great. CASE TRENDS magazine reported it to be the primary concern of over four hundred of the top MIS executives.

  10. Contrast in air pollution components between major streets and background locations: Particulate matter mass, black carbon, elemental composition, nitrogen oxide and ultrafine particle number

    Boogaard, Hanna; Kos, Gerard P. A.; Weijers, Ernie P.; Janssen, Nicole A. H.; Fischer, Paul H.; van der Zee, Saskia C.; de Hartog, Jeroen J.; Hoek, Gerard

    2011-01-01

    Policies to reduce outdoor air pollution concentrations are often assessed on the basis of the regulated pollutants. Whether these are the most appropriate components to assess the potential health benefits is questionable, as other health-relevant pollutants may be more strongly related to traffic. The aim of this study is to compare the contrast in concentration between major roads and (sub)urban background for a large range of pollutants and to analyze the magnitude of the measured difference in the street - background for major streets with different street configurations. Measurements of PM 10, PM 2.5, particle number concentrations (PNC), black carbon (BC), elemental composition of PM 10 and PM 2.5 and NO x were conducted simultaneously in eight major streets and nine (sub)urban background locations in the Netherlands. Measurements were done six times for a week during a six month period in 2008. High contrasts between busy streets and background locations in the same city were found for chromium, copper and iron (factor 2-3). These elements were especially present in the coarse fraction of PM. In addition, high contrasts were found for BC and NO x (factor 1.8), typically indicators of direct combustion emissions. The contrast for PNC was similar to BC. NO 2 contrast was lower (factor 1.5). The largest contrast was found for two street canyons and two streets with buildings at one side of the street only. The contrast between busy streets and urban background in NO 2 was less than the contrast found for BC, PNC and elements indicative of non-exhaust emissions, adding evidence that NO 2 is not representing (current) traffic well. The study supports a substantial role for non-exhaust emissions including brake- and tyre wear and road dust in addition to direct combustion emissions. Significant underestimation of disease burden may occur when relying too much on the regulated components.

  11. Identification of human cytochrome P450 and UGT enzymes involved in the metabolism of ferulic acid, a major bioactive component in traditional Chinese medicines.

    Zhuang, Xiao-Mei; Chen, Lin; Tan, Yan; Yang, Hai-Ying; Lu, Chuang; Gao, Yue; Li, Hua

    2017-09-01

    Ferulic acid (FA) is an active component of herbal medicines. One of the best documented activities of FA is its antioxidant property. Moreover, FA exerts antiallergic, anti-inflammatory, and hepatoprotective effects. However, the metabolic pathways of FA in humans remain unclear. To identify whether human CYP or UGT enzymes are involved in the metabolism of FA, reaction phenotyping of FA was conducted using major CYP-selective chemical inhibitors together with individual CYP and UGT Supersomes. The CYP- and/or UGT-mediated metabolism kinetics were examined simultaneously or individually. Relative activity factor and total normalized rate approaches were used to assess the relative contributions of each major human CYPs towards the FA metabolism. Incubations of FA with human liver microsomes (HLM) displayed NADPH- and UDPGA-dependent metabolism with multiple CYP and UGT isoforms involved. CYPs and UGTs contributed equally to the metabolism of FA in HLM. Although CYP1A2 and CYP3A4 appeared to be the major contributors in the CYP-mediated clearance, their contributions to the overall clearance are still minor (medicines because multiple phase I and phase II enzymes are involved in its metabolism. Copyright © 2017 China Pharmaceutical University. Published by Elsevier B.V. All rights reserved.

  12. A component-based groupware development methodology

    Guareis de farias, Cléver; Ferreira Pires, Luis; van Sinderen, Marten J.

    2000-01-01

    Software development in general and groupware applications in particular can greatly benefit from the reusability and interoperability aspects associated with software components. Component-based software development enables the construction of software artefacts by assembling prefabricated,

  13. Assessment and management of ageing of major nuclear power plant components important to safety: In-containment instrumentation and control cables. Volume I

    2000-12-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance, design or manufacturing error) can jeopardize plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This publication is one in a series of guidance reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety, which was issued by the IAEA in 1992. The current practices for the assessment of safety margins (fitness-for-service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canadian deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), including the Soviet designed 'water moderated and water cooled energy reactors' (WWERs), are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues. The guidance reports are directed at technical experts and managers from NPPs and from regulatory, plant design, manufacturing

  14. Assessment and management of ageing of major nuclear power plant components important to safety: In-containment instrumentation and control cables. Volume II

    2000-12-01

    At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance, design or manufacturing error) can jeopardize plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This publication is one in a series of guidance reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety, which was issued by the IAEA in 1992. The current practices for the assessment of safety margins (fitness-for-service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canadian deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), including the Soviet designed 'water moderated and water cooled energy reactors' (WWERs), are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs, and to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues. The guidance reports are directed at technical experts and managers from NPPs and from regulatory, plant design, manufacturing

  15. From Software Development to Software Assembly

    Sneed, Harry M.; Verhoef, Chris

    2016-01-01

    The lack of skilled programming personnel and the growing burden of maintaining customized software are forcing organizations to quit producing their own software. It's high time they turned to ready-made, standard components to fulfill their business requirements. Cloud services might be one way to

  16. 10-Hydroxy-2-decenoic Acid, the Major Lipid Component of Royal Jelly, Extends the Lifespan of Caenorhabditis elegans through Dietary Restriction and Target of Rapamycin Signaling

    Yoko Honda

    2015-01-01

    Full Text Available Royal jelly (RJ produced by honeybees has been reported to possess diverse health-beneficial properties and has been implicated to have a function in longevity across diverse species as well as honeybees. 10-Hydroxy-2-decenoic acid (10-HDA, the major lipid component of RJ produced by honeybees, was previously shown to increase the lifespan of Caenorhabditis elegans. The objective of this study is to elucidate signaling pathways that are involved in the lifespan extension by 10-HDA. 10-HDA further extended the lifespan of the daf-2 mutants, which exhibit long lifespan through reducing insulin-like signaling (ILS, indicating that 10-HDA extended lifespan independently of ILS. On the other hand, 10-HDA did not extend the lifespan of the eat-2 mutants, which show long lifespan through dietary restriction caused by a food-intake defect. This finding indicates that 10-HDA extends lifespan through dietary restriction signaling. We further found that 10-HDA did not extend the lifespan of the long-lived mutants in daf-15, which encodes Raptor, a target of rapamycin (TOR components, indicating that 10-HDA shared some longevity control mechanisms with TOR signaling. Additionally, 10-HDA was found to confer tolerance against thermal and oxidative stress. 10-HDA increases longevity not through ILS but through dietary restriction and TOR signaling in C. elegans.

  17. Estimation of Th, Cs, Sr, I, Co, Fe, Zn, Ca and K in major food components using neutron activation analysis technique

    Nair, Suma; Bhati, Sharda

    2010-01-01

    The concentration of some radiologically and nutritionally important trace elements: Th, Cs, Sr, I, Co, Fe, Zn, Ca and K were determined in major food components such as cereals, pulses, vegetables, fruits, milk etc. The trace elements in food samples were determined using neutron activation analysis technique which involves instrumental and radiochemical neutron activation analysis. Whereas, the trace elements Th, Cs, K and Sr, are important in radiation protection; Fe and Zn are of importance in nutrition studies and Ca and I have dual importance, both in nutrition and radiation protection. The results of analysis show that among the food materials, higher concentrations of Th, Cs, Sr, K, Fe, Zn and Co were found in cereals and pulses. In case of Ca, the milk appears to be the main contributor towards its dietary intake. The estimated concentrations of the trace elements in food components can be employed in determining the daily dietary intake of these elements which in turn can be used for their biokinetic studies. (author)

  18. Protective effects of Mangifera indica L extract (Vimang), and its major component mangiferin, on iron-induced oxidative damage to rat serum and liver.

    Pardo-Andreu, Gilberto L; Barrios, Mariela Forrellat; Curti, Carlos; Hernández, Ivones; Merino, Nelson; Lemus, Yeny; Martínez, Ioanna; Riaño, Annia; Delgado, René

    2008-01-01

    In vivo preventive effects of a Mangifera indica L extract (Vimang) or its major component mangiferin on iron overload injury have been studied in rats given respectively, 50, 100, 250 mg kg(-1) body weight of Vimang, or 40 mg kg(-1) body weight of mangiferin, for 7 days prior to, and for 7 days following the administration of toxic amounts of iron-dextran. Both Vimang or mangiferin treatment prevented iron overload in serum as well as liver oxidative stress, decreased serum and liver lipid peroxidation, serum GPx activity, and increased serum and liver GSH, serum SOD and the animals overall antioxidant condition. Serum iron concentration was decreased although at higher doses, Vimang tended to increase it; percent tranferrin saturation, liver weight/body mass ratios, liver iron content was decreased. Treatment increased serum iron-binding capacity and decreased serum levels of aspartate-amine transferase (ASAT) and alanine-amine transferase (ALAT), as well as the number of abnormal Kupffer cells in iron-loaded livers. It is suggested that besides acting as antioxidants, Vimang extract or its mangiferin component decrease liver iron by increasing its excretion. Complementing earlier in vitro results from our group, it appears possible to support the hypothesis that Vimang and mangiferin present therapeutically useful effects in iron overload related diseases.

  19. 10-Hydroxy-2-decenoic Acid, the Major Lipid Component of Royal Jelly, Extends the Lifespan of Caenorhabditis elegans through Dietary Restriction and Target of Rapamycin Signaling.

    Honda, Yoko; Araki, Yoko; Hata, Taketoshi; Ichihara, Kenji; Ito, Masafumi; Tanaka, Masashi; Honda, Shuji

    2015-01-01

    Royal jelly (RJ) produced by honeybees has been reported to possess diverse health-beneficial properties and has been implicated to have a function in longevity across diverse species as well as honeybees. 10-Hydroxy-2-decenoic acid (10-HDA), the major lipid component of RJ produced by honeybees, was previously shown to increase the lifespan of Caenorhabditis elegans. The objective of this study is to elucidate signaling pathways that are involved in the lifespan extension by 10-HDA. 10-HDA further extended the lifespan of the daf-2 mutants, which exhibit long lifespan through reducing insulin-like signaling (ILS), indicating that 10-HDA extended lifespan independently of ILS. On the other hand, 10-HDA did not extend the lifespan of the eat-2 mutants, which show long lifespan through dietary restriction caused by a food-intake defect. This finding indicates that 10-HDA extends lifespan through dietary restriction signaling. We further found that 10-HDA did not extend the lifespan of the long-lived mutants in daf-15, which encodes Raptor, a target of rapamycin (TOR) components, indicating that 10-HDA shared some longevity control mechanisms with TOR signaling. Additionally, 10-HDA was found to confer tolerance against thermal and oxidative stress. 10-HDA increases longevity not through ILS but through dietary restriction and TOR signaling in C. elegans.

  20. Computer software quality assurance

    Ives, K.A.

    1986-06-01

    The author defines some criteria for the evaluation of software quality assurance elements for applicability to the regulation of the nuclear industry. The author then analyses a number of software quality assurance (SQA) standards. The major extracted SQA elements are then discussed, and finally specific software quality assurance recommendations are made for the nuclear industry

  1. Major Lipid Body Protein: A Conserved Structural Component of Lipid Body Accumulated during Abiotic Stress in S. quadricauda CASA-CC202

    Arumugam Muthu

    2016-11-01

    Full Text Available Abiotic stress in oleaginous microalgae enhances lipid accumulation and is stored in a specialised organelle called lipid droplets (LDs. Both the LDs and body are enriched with major lipid droplet protein (MLDP. It serves as a major structural component and also plays a key role in recruiting other proteins and enzymes involved in lipid body maturation. In the present study, the presence of MLDP was detected in two abiotic stress condition namely nitrogen starvation and salt stress condition. Previous research reveals that nitrogen starvation enhances lipid accumulation. Therefore, the effect of salt on growth, biomass yield, and fatty acid profile is studied in detail. The specific growth rate of S. quadricauda under the salt stress of 10mM concentration is about 0.174μ and in control, the SGR is 0.241μ. An increase in the doubling time of the cells shows that the rate of cell division decreases during salt stress (2.87–5.17. The dry biomass content also decreased drastically at 50mM salt-treated cells (129mg/L compared to control (236mg/L on the day 20. The analysis of fatty acid composition also revealed that there is a 20% decrease in the saturated fatty acid level and 19.9% increment in monounsaturated fatty acid level, which makes salt-mediated lipid accumulation as a suitable biodiesel precursor.

  2. Major Lipid Body Protein: A Conserved Structural Component of Lipid Body Accumulated during Abiotic Stress in S. quadricauda CASA-CC202

    Javee, Anand; Sulochana, Sujitha Balakrishnan; Pallissery, Steffi James; Arumugam, Muthu

    2016-01-01

    Abiotic stress in oleaginous microalgae enhances lipid accumulation, which is stored in a specialized organelle called lipid droplets (LDs). Both the LDs or lipid body are enriched with major lipid droplet protein (MLDP). It serves as a major structural component and also plays a key role in recruiting other proteins and enzymes involved in lipid body maturation. In the present study, the presence of MLDP was detected in two abiotic stress condition namely nitrogen starvation and salt stress condition. Previous research reveals that nitrogen starvation enhances lipid accumulation. Therefore, the effect of salt on growth, biomass yield, and fatty acid profile is studied in detail. The specific growth rate of Scenedesmus quadricauda under the salt stress of 10mM concentration is about 0.174 μ and in control, the SGR is 0.241 μ. An increase in the doubling time of the cells shows that the rate of cell division decreases during salt stress (2.87–5.17). The dry biomass content also decreased drastically at 50mM salt-treated cells (129 mg/L) compared to control (236 mg/L) on the day 20. The analysis of fatty acid composition also revealed that there is a 20% decrease in the saturated fatty acid level and 19.9% increment in monounsaturated fatty acid level, which makes salt-mediated lipid accumulation as a suitable biodiesel precursor.

  3. [Effect of β-cyclodextrin inclusion complex on transport of major components of Xiangfu Siwu decoction essential oil in Caco-2 cell monolayer model].

    Xi, Jun-zuan; Qian, Da-wei; Duan, Jin-ao; Liu, Pei; Zhu, Yue; Zhu, Zhen-hua; Zhang, Li

    2015-08-01

    Although the essential oil of Xiangfu Siwu decoction (XFSWD) has strong pharmacological activity, its special physical and chemical properties restrict the clinical application and curative effect. In this paper, Xiangfu Siwu decoction essential oil (XFS-WO) was prepared by forming inclusion complex with β-cyclodextrin (β-CD). The present study is to investigate the effect of β-CD inclusion complex on the transport of major components of XFSWO using Caco-2 cell monolayer model, thus to research the effect of this formation on the absorption of drugs with low solubility and high permeability, which belong to class 2 in biopharmaceutics classification system. A sensitive and rapid UPLC-MS/MS method was developed for simultaneous quantification of senkyunolide A, 3-n-butylphthalide, Z-ligustilide, dehydrocostus lactone and α-cyperone, which are active compounds in XFSWO. The transport parameters were analyzed and compared in free oil and its β-CD inclusion complex. The result revealed that the formation of XFSWO/β-CD inclusion complex has significantly increased the transportation and absorption of major active ingredients than free oil. Accordingly, it can be speculated that cyclodextrin inclusion complex can improve bioavailability of poorly water-soluble drugs. Above all these mentioned researches, it provided foundation and basis for physiological disposition and pharmaceutical study of XFSWD.

  4. The Virome and Its Major Component, Anellovirus, a Convoluted System Molding Human Immune Defenses and Possibly Affecting the Development of Asthma and Respiratory Diseases in Childhood

    Giulia Freer

    2018-04-01

    Full Text Available The microbiome, a thriving and complex microbial community colonizing the human body, has a broad impact on human health. Colonization is a continuous process that starts very early in life and occurs thanks to shrewd strategies microbes have evolved to tackle a convoluted array of anatomical, physiological, and functional barriers of the human body. Cumulative evidence shows that viruses are part of the microbiome. This part, called virome, has a dynamic composition that reflects what we eat, how and where we live, what we do, our genetic background, and other unpredictable variables. Thus, the virome plays a chief role in shaping innate and adaptive host immune defenses. Imbalance of normal microbial flora is thought to trigger or exacerbate many acute and chronic disorders. A compelling example can be found in the respiratory apparatus, where early-life viral infections are major determinants for the development of allergic diseases, like asthma, and other non-transmissible diseases. In this review, we focus on the virome and, particularly, on Anelloviridae, a recently discovered virus family. Anelloviruses are major components of the virome, present in most, if not all, human beings, where they are acquired early in life and replicate persistently without causing apparent disease. We will discuss how modulation of innate and adaptive immune systems by Anelloviruses can influence the development of respiratory diseases in childhood and provide evidence for the use of Anelloviruses as useful and practical molecular markers to monitor inflammatory processes and immune system competence.

  5. Major Lipid Body Protein: A Conserved Structural Component of Lipid Body Accumulated during Abiotic Stress in S. quadricauda CASA-CC202

    Javee, Anand [Biotechnology Division, National Institute for Interdisciplinary Science and Technology (NIIST), Council of Scientific and Industrial Research (CSIR), Trivandrum (India); Sulochana, Sujitha Balakrishnan [Biotechnology Division, National Institute for Interdisciplinary Science and Technology (NIIST), Council of Scientific and Industrial Research (CSIR), Trivandrum (India); Academy of Scientific and Innovative Research (AcSIR), New Delhi (India); Pallissery, Steffi James [Biotechnology Division, National Institute for Interdisciplinary Science and Technology (NIIST), Council of Scientific and Industrial Research (CSIR), Trivandrum (India); Arumugam, Muthu, E-mail: arumugam@niist.res.in [Biotechnology Division, National Institute for Interdisciplinary Science and Technology (NIIST), Council of Scientific and Industrial Research (CSIR), Trivandrum (India); Academy of Scientific and Innovative Research (AcSIR), New Delhi (India)

    2016-11-23

    Abiotic stress in oleaginous microalgae enhances lipid accumulation, which is stored in a specialized organelle called lipid droplets (LDs). Both the LDs or lipid body are enriched with major lipid droplet protein (MLDP). It serves as a major structural component and also plays a key role in recruiting other proteins and enzymes involved in lipid body maturation. In the present study, the presence of MLDP was detected in two abiotic stress condition namely nitrogen starvation and salt stress condition. Previous research reveals that nitrogen starvation enhances lipid accumulation. Therefore, the effect of salt on growth, biomass yield, and fatty acid profile is studied in detail. The specific growth rate of Scenedesmus quadricauda under the salt stress of 10mM concentration is about 0.174 μ and in control, the SGR is 0.241 μ. An increase in the doubling time of the cells shows that the rate of cell division decreases during salt stress (2.87–5.17). The dry biomass content also decreased drastically at 50mM salt-treated cells (129 mg/L) compared to control (236 mg/L) on the day 20. The analysis of fatty acid composition also revealed that there is a 20% decrease in the saturated fatty acid level and 19.9% increment in monounsaturated fatty acid level, which makes salt-mediated lipid accumulation as a suitable biodiesel precursor.

  6. Verification and validation process for the safety software in KNICS

    Kwon, Kee-Choon; Lee, Jang-Soo; Kim, Jang-Yeol

    2004-01-01

    This paper describes the Verification and Validation (V and V ) process for safety software of Programmable Logic Controller (PLC), Digital Reactor Protection System (DRPS), and Engineered Safety Feature-Component Control System (ESF-CCS) that are being developed in Korea Nuclear Instrumentation and Control System (KNICS) projects. Specifically, it presents DRPS V and V experience according to the software development life cycle. The main activities of DRPS V and V process are preparation of software planning documentation, verification of Software Requirement Specification (SRS), Software Design Specification (SDS) and codes, and testing of the integrated software and the integrated system. In addition, they include software safety analysis and software configuration management. SRS V and V of DRPS are technical evaluation, licensing suitability evaluation, inspection and traceability analysis, formal verification, preparing integrated system test plan, software safety analysis, and software configuration management. Also, SDS V and V of RPS are technical evaluation, licensing suitability evaluation, inspection and traceability analysis, formal verification, preparing integrated software test plan, software safety analysis, and software configuration management. The code V and V of DRPS are traceability analysis, source code inspection, test case and test procedure generation, software safety analysis, and software configuration management. Testing is the major V and V activity of software integration and system integration phase. Software safety analysis at SRS phase uses Hazard Operability (HAZOP) method, at SDS phase it uses HAZOP and Fault Tree Analysis (FTA), and at implementation phase it uses FTA. Finally, software configuration management is performed using Nu-SCM (Nuclear Software Configuration Management) tool developed by KNICS project. Through these activities, we believe we can achieve the functionality, performance, reliability and safety that are V

  7. The Qualification Experiences for Safety-critical Software of POSAFE-Q

    Kim, Jang Yeol; Son, Kwang Seop; Cheon, Se Woo; Lee, Jang Soo; Kwon, Kee Choon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2009-05-15

    Programmable Logic Controllers (PLC) have been applied to the Reactor Protection System (RPS) and the Engineered Safety Feature (ESF)-Component Control System (CCS) as the major safety system components of nuclear power plants. This paper describes experiences on the qualification of the safety-critical software including the pCOS kernel and system tasks related to a safety-grade PLC, i.e. the works done for the Software Verification and Validation, Software Safety Analysis, Software Quality Assurance, and Software Configuration Management etc.

  8. Involvement of major components from Sporothrix schenckii cell wall in the caspase-1 activation, nitric oxide and cytokines production during experimental sporotrichosis.

    Gonçalves, Amanda Costa; Maia, Danielle Cardoso Geraldo; Ferreira, Lucas Souza; Monnazzi, Luis Gustavo Silva; Alegranci, Pâmela; Placeres, Marisa Campos Polesi; Batista-Duharte, Alexander; Carlos, Iracilda Zeppone

    2015-02-01

    Sporotrichosis is a chronic infection caused by the dimorphic fungus Sporothrix schenckii, involving all layers of skin and the subcutaneous tissue. The role of innate immune toll-like receptors 2 and 4 in the defense against this fungus has been reported, but so far, there were no studies on the effect of cell wall major components over the cytosolic oligo-merization domain (NOD)-like receptors, important regulators of inflammation and responsible for the maturation of IL-1β and IL-18, whose functions are dependents of the caspase-1 activation, that can participate of inflammasome. It was evaluated the percentage of activation of caspase-1, the production of IL-1β, IL-18, IL-17, IFN-γ and nitric oxide in a Balb/c model of S. schenckii infection. It was observed a decreased activity of caspase-1 during the fourth and sixth weeks of infection accompanied by reduced secretion of the cytokines IL-1β, IL-18 and IL-17 and high production of nitric oxide. IFN-γ levels were elevated during the entire time course of infection. This temporal reduction in caspase-1 activity coincides exactly with the reported period of fungal burden associated with a transitory immunosuppression induced by this fungus and detected in similar infection models. These results indicate the importance of interaction between caspase-1, cytokines IL-1β and IL-18 in the host defense against S. schenckii infection, suggesting a participation the inflammasome in this response.

  9. Comparative pharmacokinetic and tissue distribution profiles of four major bioactive components in normal and hepatic fibrosis rats after oral administration of Fuzheng Huayu recipe.

    Yang, Tao; Liu, Shan; Wang, Chang-Hong; Tao, Yan-Yan; Zhou, Hua; Liu, Cheng-Hai

    2015-10-10

    Fuzheng Huayu recipe (FZHY) is a herbal product for the treatment of liver fibrosis approved by the Chinese State Food and Drug Administration (SFDA), but its pharmacokinetics and tissue distribution had not been investigated. In this study, the liver fibrotic model was induced with intraperitoneal injection of dimethylnitrosamine (DMN), and FZHY was given orally to the model and normal rats. The plasma pharmacokinetics and tissue distribution profiles of four major bioactive components from FZHY were analyzed in the normal and fibrotic rat groups using an ultrahigh performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method. Results revealed that the bioavailabilities of danshensu (DSS), salvianolic acid B (SAB) and rosmarinic acid (ROS) in liver fibrotic rats increased 1.49, 3.31 and 2.37-fold, respectively, compared to normal rats. There was no obvious difference in the pharmacokinetics of amygdalin (AMY) between the normal and fibrotic rats. The tissue distribution of DSS, SAB, and AMY trended to be mostly in the kidney and lung. The distribution of DSS, SAB, and AMY in liver tissue of the model rats was significantly decreased compared to the normal rats. Significant differences in the pharmacokinetics and tissue distribution profiles of DSS, ROS, SAB and AMY were observed in rats with hepatic fibrosis after oral administration of FZHY. These results provide a meaningful basis for developing a clinical dosage regimen in the treatment of hepatic fibrosis by FZHY. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Antimicrobial action and anti-corrosion effect against sulfate reducing bacteria by lemongrass (Cymbopogon citratus) essential oil and its major component, the citral.

    Korenblum, Elisa; Regina de Vasconcelos Goulart, Fátima; de Almeida Rodrigues, Igor; Abreu, Fernanda; Lins, Ulysses; Alves, Péricles Barreto; Blank, Arie Fitzgerald; Valoni, Erika; Sebastián, Gina V; Alviano, Daniela Sales; Alviano, Celuta Sales; Seldin, Lucy

    2013-08-10

    The anti-corrosion effect and the antimicrobial activity of lemongrass essential oil (LEO) against the planktonic and sessile growth of a sulfate reducing bacterium (SRB) were evaluated. Minimum inhibitory concentration (MIC) of LEO and its major component, the citral, was 0.17 mg ml-1. In addition, both LEO and citral showed an immediate killing effect against SRB in liquid medium, suggesting that citral is responsible for the antimicrobial activity of LEO against SRB. Transmission electron microscopy revealed that the MIC of LEO caused discernible cell membrane alterations and formed electron-dense inclusions. Neither biofilm formation nor corrosion was observed on carbon steel coupons after LEO treatment. LEO was effective for the control of the planktonic and sessile SRB growth and for the protection of carbon steel coupons against biocorrosion. The application of LEO as a potential biocide for SRB growth control in petroleum reservoirs and, consequently, for souring prevention, and/or as a coating protection against biocorrosion is of great interest for the petroleum industries.

  11. Antimicrobial action and anti-corrosion effect against sulfate reducing bacteria by lemongrass (Cymbopogon citratus) essential oil and its major component, the citral

    2013-01-01

    The anti-corrosion effect and the antimicrobial activity of lemongrass essential oil (LEO) against the planktonic and sessile growth of a sulfate reducing bacterium (SRB) were evaluated. Minimum inhibitory concentration (MIC) of LEO and its major component, the citral, was 0.17 mg ml-1. In addition, both LEO and citral showed an immediate killing effect against SRB in liquid medium, suggesting that citral is responsible for the antimicrobial activity of LEO against SRB. Transmission electron microscopy revealed that the MIC of LEO caused discernible cell membrane alterations and formed electron-dense inclusions. Neither biofilm formation nor corrosion was observed on carbon steel coupons after LEO treatment. LEO was effective for the control of the planktonic and sessile SRB growth and for the protection of carbon steel coupons against biocorrosion. The application of LEO as a potential biocide for SRB growth control in petroleum reservoirs and, consequently, for souring prevention, and/or as a coating protection against biocorrosion is of great interest for the petroleum industries. PMID:23938023

  12. 樱桃核主要成分分析及其抗氧化性研究%Major Components and Antioxidant Capability Analysis of Cherry Stone

    甄天元; 肖军霞

    2014-01-01

    樱桃可以加工成樱桃汁、樱桃酒、樱桃醋、樱桃果脯等农副产品,而樱桃核却在加工中成为废弃物。以大紫红和崂山红樱桃核为材料,测定了其主要成分,并分别对其水、石油醚、乙酸乙酯、正丁醇提取物进行了抗氧化性研究。结果表明,樱桃核中主要含有水分、蛋白质和油脂等成分,崂山红樱桃核的4种提取物的还原能力、羟基自由基抑制率和超氧阴离子抑制率最高的均为水提取物,分别达到0.27%、61.5%和38.7%,这说明崂山红樱桃核中起抗氧化作用的主要是水溶性成分。%Cherry can be processed to juice, wine, vinegar and preserve, but the cherry stone is often discarded as a waste. In this paper, the major components in the stone of Dazhihong cherry and Laoshan red cherry were determined and the antioxidant capabilities of the aqueous extract, pettroleum extract, ethyl acetate extract, and n-butanol extract of Laoshan red cherry stone were measured. The results indicated that the cherry stones consisted mainly of water, protein, and lipid. The aqueous extract of the stone of Laoshan red cherry had the highest reducing capability, hydroxyl radical inhibition rate and superoxide anion inhibition activity compared with other organic solvent extracts, reaching 0.27 %,61.5 % and 38.7 % respecitvely, implying that the antioxidant capability of Laoshan red cherry stone was contributed mainly by water-soluble components.

  13. Major components of metabolic syndrome and nutritional intakes in different genotype of UCP2 -866G/A gene polymorphisms in patients with NAFLD.

    Abbasalizad Farhangi, Mahdieh; Mohseni, Fatemeh; Farajnia, Safar; Jafarabadi, Mohammad-Asghari

    2016-06-14

    It has been suggested that dietary modifications in combination with genetic predisposition play an important role in the pathogenesis of NAFLD. In the current study we aimed to investigate the major components of metabolic syndrome in patients with non-alcoholic fatty liver disease (NAFLD) and nutritional intakes according to different genotype of uncoupling protein-2 (UCP2) -866G/A gene polymorphism in these patients. In this study 151 participants including 75 patients with NAFLD and 76 healthy individuals were enrolled. Dietary intakes were assessed using a semi-quantitative food-frequency questionnaire. Physical activity was obtained by metabolic equivalent questionnaire. Anthropometric assessments were conducted by a trained researcher and body mass index and waist to hip ratio were calculated. Body composition was measured by bioelectrical impedance analysis and biochemical assays including fasting serum glucose, liver enzymes and lipid profiles were measured. Polymorphisms of -866G/A UCP2 gene was determined using polymerase chain reaction-restriction fragment length polymorphism method. Serum triglyceride concentrations in 53.3 % of NAFLD patients compared with 35.5 % of control group was more than 150 mg/dl (P = 0.034). A significantly higher prevalence of low serum high density lipoprotein cholesterol concentrations was also observed in female NAFLD patients (P  0.05). However, according to genotypes patients with AG genotype had significantly higher protein consumption compared with control group (P < 0.05). Significantly higher consumption of dietary iron and copper in NAFLD patients with AG genotype was only observed among patients with NAFLD. However, the comparison of macro and micronutrient intakes in control group sound for stronger differences for AA genotype although these differences did not achieve significant threshold. A high prevalence of metabolic abnormalities was reported among NAFLD patients. Additionally, among NAFLD group

  14. Cytotoxicity of Vitex agnus-castus fruit extract and its major component, casticin, correlates with differentiation status in leukemia cell lines.

    Kikuchi, Hidetomo; Yuan, Bo; Nishimura, Yoshio; Imai, Masahiko; Furutani, Ryota; Kamoi, Saki; Seno, Misako; Fukushima, Shin; Hazama, Shingo; Hirobe, Chieko; Ohyama, Kunio; Hu, Xiao-Mei; Takagi, Norio; Hirano, Toshihiko; Toyoda, Hiroo

    2013-12-01

    We have demonstrated that an extract from the ripe fruit of Vitex agnus-castus (Vitex) exhibits cytotoxic activities against various types of solid tumor cells, whereas its effects on leukemia cells has not been evaluated to date. In this study, the effects of Vitex and its major component, casticin, on leukemia cell lines, HL-60 and U-937, were investigated by focusing on proliferation, induction of apoptosis and differentiation. Identification and quantitation by NMR spectroscopy showed that casticin accounted for approximate 1% weight of Vitex. Dose-dependent cytotoxicity of Vitex and casticin was observed in both cell lines, and HL-60 cells were more sensitive to the cytotoxicity of Vitex/casticin compared to U-937 cells. Furthermore, compared to unstimulated HL-60 cells, phorbol 12-myristate 13-acetate (PMA)- and 1,25-dihydroxyvitamin D₃ (VD₃)-differentiated HL-60 cells acquired resistance to Vitex/casticin based on the results from cell viability and apoptosis induction analysis. Since the HL-60 cell line is more immature than the U-937 cell line, these results suggested that the levels of cytotoxicity of Vitex/casticin were largely attributed to the degree of differentiation of leukemia cells; that is, cell lines with less differentiated phenotype were more susceptible than the differentiated ones. RT-PCR analysis demonstrated that PMA upregulated the expression of intercellular adhesion molecule-1 (ICAM-1) in HL-60 cells, and that anti-ICAM-1 monoclonal antibody not only abrogated PMA-induced aggregation and adhesion of the cells but also restored its sensitivity to Vitex. These results suggested that ICAM-1 plays a crucial role in the acquired resistance in PMA-differentiated HL-60 cells by contributing to cell adhesion. These findings provide fundamental insights into the clinical application of Vitex/casticin for hematopoietic malignancy.

  15. Three-dimensional components of selfhood in treatment-naive patients with major depressive disorder: A resting-state qEEG imaging study.

    Fingelkurts, Andrew A; Fingelkurts, Alexander A

    2017-05-01

    Based on previous studies implicating increased functional connectivity within the self-referential brain network in major depressive disorder (MDD), and considering the functional roles of three distinct modules of such brain net (responsible for three-dimensional components of Selfhood) together with the documented abnormalities of self-related processing in MDD, we tested the hypothesis that patients with depression would exhibit increased connectivity within each module of the self-referential brain network and that the strength of these connections would correlate positively with depression severity. Applying the electroencephalogram (EEG) operational synchrony analysis to extract three modules of the self-referential brain network in 12 medication-free depressive outpatients and 10 control subjects we have found an increase in the strength of EEG synchrony within all three modules in depressive patients (though non-significant for the right module). Furthermore, multiple regression analysis that used 3 factors (values of synchrony strength for all three modules) as input indicated that combined increase in the strength of synchrony in all three modules was positively associated with severity of depression. Taken together the findings of this study suggest that depression is primarily associated with hypersynchrony in all three modules of the brain self-referential network (the anterior module been responsible for "witnessing observation and first-person perspective", the left posterior module been responsible for "reflective agency and narration" and the right posterior module been responsible for "bodily representational-emotional agency"), thus contributing to excessive self-focus, rumination, and body tension. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Prophylactic administration of an extract from Plantaginis Semen and its major component aucubin inhibits mechanical allodynia caused by paclitaxel in mice

    Tsugunobu Andoh

    2016-07-01

    Full Text Available The chemotherapeutic agent paclitaxel (PTX causes peripheral neuropathy as a major dose-limiting side effect, and this peripheral neuropathy is difficult to control. Our previous report showed that prophylactic repetitive administration of goshajinkigan (牛車腎氣丸 niú chē shèn qì wán, but not hachimijiogan (八味地黃丸 bā wèi dì huáng wán, which lacks two of the constituents of goshajinkigan, inhibited PTX-induced mechanical allodynia in mice. Thus, the herbal medicines Plantaginis Semen (車前子 chē qián zǐ or Achyranthis Radix (牛膝 niú xī may contribute to the inhibitory action of goshajinkigan on the exacerbation of PTX-induced mechanical allodynia [Andoh et al, J. Tradit. Complement. Med. 2014; 4: 293–297]. Therefore, in this study, we examined whether an extract of Plantaginis Semen (EPS or Achyranthis Radix (EAR would relieve PTX-induced mechanical allodynia in mice. A single intraperitoneal injection of PTX caused mechanical allodynia, which peaked on day 14 after injection. Repetitive oral administration of EPS, but not EAR, starting from the day after PTX injection significantly inhibited the exacerbation of PTX-induced mechanical allodynia. Repetitive intraperitoneal injection of aucubin, one of the main components of EPS, starting from the day after PTX injection also significantly reduced PTX-induced mechanical allodynia. However, repetitive intraperitoneal injection of geniposide acid (a precursor of aucubin or catalpol (a metabolite of aucubin did not prevent the exacerbation of mechanical allodynia. These results suggest that prophylactic administration of EPS is effective for preventing the exacerbation of PTX-induced allodynia. Aucubin may contribute to the inhibitory action of EPS on the exacerbation of PTX-induced allodynia.

  17. Ultrasonic TOFD method application for steel components and welds of 10 mm wall thickness using ultrasonic flaw detector and ULTRA7 TOFD software

    Kasarov, R.; Tabakova, B.

    2008-01-01

    Pressure Vessels inspection is carried out using complex of NDT techniques. A relatively recent technique ultrasonic NDJ is the Time-of-Flight Diffraction (TOFD,) method as an effective method for detection and sizing of flaws. One of the way inspection heavy duty steel elements and welds is to use manual TOFD technique with longitudinal waves at refracted angles of 45 to 70 degrees. Typically inspections using this method have been on steel elements and welds varying from 12 mm to 300 mm wall thickness. In this paper is presented examples of using the TOFD techniques for 10 mm wall thickness using USM 35X5 and ULTRA-7 TOFD software. This software provides TOFD inspection design (PCS, sound path, beam coverage, dead zones) and validation services. The calculations of the two dead zones are derived from relatively trigonometric equation, graphically displayed on a PC-screen and weld frame form. Using ULTRA-7 TOFD the user must move the gate at which the flaw is located on PC-screen to determine the depth of defect. The diffraction points graphically displayed in a weld frame form and analyzed using geometry calculations. (authors)

  18. Software architecture 2

    Oussalah, Mourad Chabanne

    2014-01-01

    Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural templa

  19. Software architecture 1

    Oussalah , Mourad Chabane

    2014-01-01

    Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural template

  20. Software Engineering Program: Software Process Improvement Guidebook

    1996-01-01

    The purpose of this document is to provide experience-based guidance in implementing a software process improvement program in any NASA software development or maintenance community. This guidebook details how to define, operate, and implement a working software process improvement program. It describes the concept of the software process improvement program and its basic organizational components. It then describes the structure, organization, and operation of the software process improvement program, illustrating all these concepts with specific NASA examples. The information presented in the document is derived from the experiences of several NASA software organizations, including the SEL, the SEAL, and the SORCE. Their experiences reflect many of the elements of software process improvement within NASA. This guidebook presents lessons learned in a form usable by anyone considering establishing a software process improvement program within his or her own environment. This guidebook attempts to balance general and detailed information. It provides material general enough to be usable by NASA organizations whose characteristics do not directly match those of the sources of the information and models presented herein. It also keeps the ideas sufficiently close to the sources of the practical experiences that have generated the models and information.

  1. Software engineering

    Sommerville, Ian

    2010-01-01

    The ninth edition of Software Engineering presents a broad perspective of software engineering, focusing on the processes and techniques fundamental to the creation of reliable, software systems. Increased coverage of agile methods and software reuse, along with coverage of 'traditional' plan-driven software engineering, gives readers the most up-to-date view of the field currently available. Practical case studies, a full set of easy-to-access supplements, and extensive web resources make teaching the course easier than ever.

  2. Application of software quality assurance to a specific scientific code development task

    Dronkers, J.J.

    1986-03-01

    This paper describes an application of software quality assurance to a specific scientific code development program. The software quality assurance program consists of three major components: administrative control, configuration management, and user documentation. The program attempts to be consistent with existing local traditions of scientific code development while at the same time providing a controlled process of development

  3. Development of the TRSSS-1 Satellite as the Major Component of the Space Based Information System(SBIS) for Effective Decision Support System for Thailand's Natural Resources and Environmental Management

    Musigasam, Weerapant; Ditsariyakue, Praneet; Aphicholati, Navanit; Vibulsresth, Suvit

    1997-01-01

    The paper describes development of the first Thailand Remote Sensing Satellite System (TRSSS-1) by the National Research Council of Thailand (NRCT), Ministry of Science Technology and Environment (MOSTE). The TRSSS-1 project has primarily been developed as a major component of the Space Base Information System (SBIS) for effective decision support system for Thailand's natural resources and environmental management. The Space Based Information System consists of three components namely, the u...

  4. Global Software Engineering

    Ebert, Christof; Kuhrmann, Marco; Prikladnicki, Rafael

    2016-01-01

    Professional software products and IT systems and services today are developed mostly by globally distributed teams, projects, and companies. Successfully orchestrating Global Software Engineering (GSE) has become the major success factor both for organizations and practitioners. Yet, more than...... and experience reported at the IEEE International Conference on Software Engineering (ICGSE) series. The outcomes of our analysis show GSE as a field highly attached to industry and, thus, a considerable share of ICGSE papers address the transfer of Software Engineering concepts and solutions to the global stage...

  5. What Counts in Software Process?

    Cohn, Marisa

    2009-01-01

    and conversations in negotiating between prescriptions from a model and the contingencies that arise in an enactment. A qualitative field study at two Agile software development companies was conducted to investigate the role of artifacts in the software development work and the relationship between these artifacts...... and the Software Process. Documentation of software requirements is a major concern among software developers and software researchers. Agile software development denotes a different relationship to documentation, one that warrants investigation. Empirical findings are presented which suggest a new understanding...

  6. Use of Human Modeling Simulation Software in the Task Analysis of the Environmental Control and Life Support System Component Installation Procedures

    Estes, Samantha; Parker, Nelson C. (Technical Monitor)

    2001-01-01

    Virtual reality and simulation applications are becoming widespread in human task analysis. These programs have many benefits for the Human Factors Engineering field. Not only do creating and using virtual environments for human engineering analyses save money and time, this approach also promotes user experimentation and provides increased quality of analyses. This paper explains the human engineering task analysis performed on the Environmental Control and Life Support System (ECLSS) space station rack and its Distillation Assembly (DA) subsystem using EAI's human modeling simulation software, Jack. When installed on the International Space Station (ISS), ECLSS will provide the life and environment support needed to adequately sustain crew life. The DA is an Orbital Replaceable Unit (ORU) that provides means of wastewater (primarily urine from flight crew and experimental animals) reclamation. Jack was used to create a model of the weightless environment of the ISS Node 3, where the ECLSS is housed. Computer aided drawings of the ECLSS rack and DA system were also brought into the environment. Anthropometric models of a 95th percentile male and 5th percentile female were used to examine the human interfaces encountered during various ECLSS and DA tasks. The results of the task analyses were used in suggesting modifications to hardware and crew task procedures to improve accessibility, conserve crew time, and add convenience for the crew. This paper will address some of those suggested modifications and the method of presenting final analyses for requirements verification.

  7. A Constructive Approach To Software Evolution

    Ciraci, S.; van den Broek, P.M.; Aksit, Mehmet

    2007-01-01

    In many software design and evaluation techniques, either the software evolution problem is not systematically elaborated, or only the impact of evolution is considered. Thus, most of the time software is changed by editing the components of the software system, i.e. breaking down the software

  8. Software Performs Complex Design Analysis

    2008-01-01

    Designers use computational fluid dynamics (CFD) to gain greater understanding of the fluid flow phenomena involved in components being designed. They also use finite element analysis (FEA) as a tool to help gain greater understanding of the structural response of components to loads, stresses and strains, and the prediction of failure modes. Automated CFD and FEA engineering design has centered on shape optimization, which has been hindered by two major problems: 1) inadequate shape parameterization algorithms, and 2) inadequate algorithms for CFD and FEA grid modification. Working with software engineers at Stennis Space Center, a NASA commercial partner, Optimal Solutions Software LLC, was able to utilize its revolutionary, one-of-a-kind arbitrary shape deformation (ASD) capability-a major advancement in solving these two aforementioned problems-to optimize the shapes of complex pipe components that transport highly sensitive fluids. The ASD technology solves the problem of inadequate shape parameterization algorithms by allowing the CFD designers to freely create their own shape parameters, therefore eliminating the restriction of only being able to use the computer-aided design (CAD) parameters. The problem of inadequate algorithms for CFD grid modification is solved by the fact that the new software performs a smooth volumetric deformation. This eliminates the extremely costly process of having to remesh the grid for every shape change desired. The program can perform a design change in a markedly reduced amount of time, a process that would traditionally involve the designer returning to the CAD model to reshape and then remesh the shapes, something that has been known to take hours, days-even weeks or months-depending upon the size of the model.

  9. SOFTWARE OPEN SOURCE, SOFTWARE GRATIS?

    Nur Aini Rakhmawati

    2006-01-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Berlakunya Undang – undang Hak Atas Kekayaan Intelektual (HAKI, memunculkan suatu alternatif baru untuk menggunakan software open source. Penggunaan software open source menyebar seiring dengan isu global pada Information Communication Technology (ICT saat ini. Beberapa organisasi dan perusahaan mulai menjadikan software open source sebagai pertimbangan. Banyak konsep mengenai software open source ini. Mulai dari software yang gratis sampai software tidak berlisensi. Tidak sepenuhnya isu software open source benar, untuk itu perlu dikenalkan konsep software open source mulai dari sejarah, lisensi dan bagaimana cara memilih lisensi, serta pertimbangan dalam memilih software open source yang ada. Kata kunci :Lisensi, Open Source, HAKI

  10. Software Epistemology

    2016-03-01

    in-vitro decision to incubate a startup, Lexumo [7], which is developing a commercial Software as a Service ( SaaS ) vulnerability assessment...LTS Label Transition System MUSE Mining and Understanding Software Enclaves RTEMS Real-Time Executive for Multi-processor Systems SaaS Software ...as a Service SSA Static Single Assignment SWE Software Epistemology UD/DU Def-Use/Use-Def Chains (Dataflow Graph)

  11. Challenges of the Open Source Component Marketplace in the Industry

    Ayala, Claudia; Hauge, Øyvind; Conradi, Reidar; Franch, Xavier; Li, Jingyue; Velle, Ketil Sandanger

    The reuse of Open Source Software components available on the Internet is playing a major role in the development of Component Based Software Systems. Nevertheless, the special nature of the OSS marketplace has taken the “classical” concept of software reuse based on centralized repositories to a completely different arena based on massive reuse over Internet. In this paper we provide an overview of the actual state of the OSS marketplace, and report preliminary findings about how companies interact with this marketplace to reuse OSS components. Such data was gathered from interviews in software companies in Spain and Norway. Based on these results we identify some challenges aimed to improve the industrial reuse of OSS components.

  12. Efficient, highly enantioselective synthesis of selina-1,3, 7(11)-trien-8-one, a major component of the essential oil of Eugenia uniflora.

    Kanazawa, A; Patin, A; Greene, A E

    2000-09-01

    The first synthesis of selina-1,3,7(11)-trien-8-one (1), a major constituent of the essential oil from the leaves of Eugenia uniflora, has been accomplished, with excellent stereo- and regiocontrol, in eight steps and in 12% overall yield from the known octalone derivative 2a.

  13. Software reliability

    Bendell, A

    1986-01-01

    Software Reliability reviews some fundamental issues of software reliability as well as the techniques, models, and metrics used to predict the reliability of software. Topics covered include fault avoidance, fault removal, and fault tolerance, along with statistical methods for the objective assessment of predictive accuracy. Development cost models and life-cycle cost models are also discussed. This book is divided into eight sections and begins with a chapter on adaptive modeling used to predict software reliability, followed by a discussion on failure rate in software reliability growth mo

  14. Software Radar Technology

    Tang Jun

    2015-08-01

    Full Text Available In this paper, the definition and the key features of Software Radar, which is a new concept, are proposed and discussed. We consider the development of modern radar system technology to be divided into three stages: Digital Radar, Software radar and Intelligent Radar, and the second stage is just commencing now. A Software Radar system should be a combination of various modern digital modular components conformed to certain software and hardware standards. Moreover, a software radar system with an open system architecture supporting to decouple application software and low level hardware would be easy to adopt "user requirements-oriented" developing methodology instead of traditional "specific function-oriented" developing methodology. Compared with traditional Digital Radar, Software Radar system can be easily reconfigured and scaled up or down to adapt to the changes of requirements and technologies. A demonstration Software Radar signal processing system, RadarLab 2.0, which has been developed by Tsinghua University, is introduced in this paper and the suggestions for the future development of Software Radar in China are also given in the conclusion.

  15. Achieving Better Buying Power through Acquisition of Open Architecture Software Systems: Volume 1

    2016-01-06

    markets [GuW12]. We thus believe our complementary research places us at an extraordinary advantage to conduct the proposed study that addresses a major...supporting “Bring Your Own Devices” (BYOD)? 22 New business models for OA software components ● Franchising ● Enterprise licensing ● Metered usage...paths IP and cybersecurity requirements will need continuous attention! 35 New business models for OA software components ● Franchising ● Enterprise

  16. Interface-based software testing

    Aziz Ahmad Rais

    2016-10-01

    Full Text Available Software quality is determined by assessing the characteristics that specify how it should work, which are verified through testing. If it were possible to touch, see, or measure software, it would be easier to analyze and prove its quality. Unfortunately, software is an intangible asset, which makes testing complex. This is especially true when software quality is not a question of particular functions that can be tested through a graphical user interface. The primary objective of software architecture is to design quality of software through modeling and visualization. There are many methods and standards that define how to control and manage quality. However, many IT software development projects still fail due to the difficulties involved in measuring, controlling, and managing software quality. Software quality failure factors are numerous. Examples include beginning to test software too late in the development process, or failing properly to understand, or design, the software architecture and the software component structure. The goal of this article is to provide an interface-based software testing technique that better measures software quality, automates software quality testing, encourages early testing, and increases the software’s overall testability

  17. In vitro activity of essential oils of Lippia sidoides and Lippia gracilis and their major chemical components against Thielaviopsis paradoxa, causal agent of stem bleeding in coconut palms

    Rejane Rodrigues da Costa e Carvalho

    2013-01-01

    Full Text Available Essential oils of Lippia sidoides, Lippia gracilis and their main chemical components were investigated for in vitro control of Thielaviopsis paradoxa. Mycelial growth and a number of pathogen conidia were inhibited by the essential oil of L. sidoides at all concentrations tested (0.2; 0.5; 1.0; 3.0 µL mL-1. L. sidoides oil contained 42.33% thymol and 4.56% carvacrol, while L. gracilis oil contained 10% thymol and 41.7% carvacrol. Mycelial growth and conidial production of T. paradoxa were completely inhibited by thymol at a 0.3 µL m-1 concentration. The results suggest that thymol could potentially be used for controlling coconut stem bleeding.

  18. Pre-aged soil organic carbon as a major component of the Yellow River suspended load: Regional significance and global relevance

    Tao, Shuqin; Eglinton, Timothy I.; Montluçon, Daniel B.; McIntyre, Cameron; Zhao, Meixun

    2015-03-01

    Large rivers connect the continents and the oceans, and corresponding material fluxes have a global impact on marine biogeochemistry. The Yellow River transports vast quantities of suspended sediments to the ocean, yet the nature of the particulate organic carbon (POC) carried by this system is not well known. The focus of this study is to characterize the sources, composition and age of suspended POC collected near the terminus of this river system, focusing on the abundance and carbon isotopic composition (13C and 14C) of specific biomarkers. The concentrations of vascular plant wax lipids (long-chain (≥C24) n-alkanes, n-fatty acids) and POC co-varied with total suspended solid (TSS) concentrations, indicating that both were controlled by the overall terrestrial sediment flux. POC exhibited relatively uniform δ13C values (-23.8 to -24.2‰), and old radiocarbon ages (4000-4640 yr). However, different biomarkers exhibited a wide range of 14C ages. Short-chain (C16, C18) fatty acid 14C ages were variable but generally the youngest organic components (from 502 yr to modern), suggesting they reflect recently biosynthesized material. Lignin phenol 14C ages were also variable and relatively young (1070 yr to modern), suggesting rapid export of carbon from terrestrial primary production. In contrast, long-chain plant wax lipids display relatively uniform and significantly older 14C ages (1500-1800 yr), likely reflecting inputs of pre-aged, mineral-associated soil OC from the Yellow River drainage basin. Even-carbon-numbered n-alkanes yielded the oldest 14C ages (up to 26 000 yr), revealing the presence of fossil (petrogenic) OC. Two isotopic mass balance approaches were explored to quantitively apportion different OC sources in Yellow River suspended sediments. Results indicate that the dominant component of POC (53-57%) is substantially pre-aged (1510-1770 yr), and likely sourced from the extensive loess-paleosol deposits outcropping within the drainage basin. Of

  19. Influence of non-dietary factors on the prevalence of abdominal obesity as a major component of the metabolic syndrome among 17-18-year-old youth.

    Piotrowska, Ewa; Broniecka, Anna; Biernat, Jadwiga; Wyka, Joanna; Bronkowska, Monika

    2015-01-01

    Youth nutrition and their nutritional status are conditioned by many factors, some of the main ones being: economic, social, climatic, cultural, and psychological factors as well as nutritional knowledge. With the growing problem of overweight and obesity among children and young people, the incidence of the metabolic syndrome is also increasing. The aim of the study was to assess the impact of demographic, sociological and psychological factors on the incidence of obesity among 17-18-year-old adolescents from Wroclaw and vicinity as a major risk factor for the development of the metabolic syndrome. The study was conducted in three upper-secondary schools in Wroclaw, Poland. In the surveyed group (17-18 years old, n = 269) girls accounted for 59.5% and boys constituted 40.5%. Majority of young people were Wroclaw citizens (72.9%). Centile charts elaborated by the Children's Memorial Health Institute were adopted for the evaluation of anthropometric parameters. Evaluation of the impact of non-dietary factors on the manner of nutrition was carried out using own questionnaire. Based on the tests, abdominal obesity was determined among 34.5% of adolescents aged 17 years and among 65.5% of these aged 18 years. Obesity was more common in girls carrying genetic burden of the disease. Youth with the largest waist circumference most often declared to use slimming diets - 6.7%, and the lowest hunger sensation in stress - 3.4%. In addition, 30.5% of the adolescents with the smallest waist circumference and 11.5% with the largest waist circumference declared to be non-smoking. Occasional alcohol consumption was declared by 30.1% of young people with the smallest waist circumference, and 13.4% with the largest waist circumference. Youth with abdominal obesity significantly more likely than those with normal waist circumference applied slimming diets. Significant impact on the formation of abdominal obesity among girls had inherited disease burden.

  20. Soluble components of the flagellar export apparatus, FliI, FliJ, and FliH, do not deliver flagellin, the major filament protein, from the cytosol to the export gate.

    Sajó, Ráchel; Liliom, Károly; Muskotál, Adél; Klein, Agnes; Závodszky, Péter; Vonderviszt, Ferenc; Dobó, József

    2014-11-01

    Flagella, the locomotion organelles of bacteria, extend from the cytoplasm to the cell exterior. External flagellar proteins are synthesized in the cytoplasm and exported by the flagellar type III secretion system. Soluble components of the flagellar export apparatus, FliI, FliH, and FliJ, have been implicated to carry late export substrates in complex with their cognate chaperones from the cytoplasm to the export gate. The importance of the soluble components in the delivery of the three minor late substrates FlgK, FlgL (hook-filament junction) and FliD (filament-cap) has been convincingly demonstrated, but their role in the transport of the major filament component flagellin (FliC) is still unclear. We have used continuous ATPase activity measurements and quartz crystal microbalance (QCM) studies to characterize interactions between the soluble export components and flagellin or the FliC:FliS substrate-chaperone complex. As controls, interactions between soluble export component pairs were characterized providing Kd values. FliC or FliC:FliS did not influence the ATPase activity of FliI alone or in complex with FliH and/or FliJ suggesting lack of interaction in solution. Immobilized FliI, FliH, or FliJ did not interact with FliC or FliC:FliS detected by QCM. The lack of interaction in the fluid phase between FliC or FliC:FliS and the soluble export components, in particular with the ATPase FliI, suggests that cells use different mechanisms for the export of late minor substrates, and the major substrate, FliC. It seems that the abundantly produced flagellin does not require the assistance of the soluble export components to efficiently reach the export gate. Copyright © 2014 Elsevier B.V. All rights reserved.

  1. The STARLINK software collection

    Penny, A. J.; Wallace, P. T.; Sherman, J. C.; Terret, D. L.

    1993-12-01

    A demonstration will be given of some recent Starlink software. STARLINK is: a network of computers used by UK astronomers; a collection of programs for the calibration and analysis of astronomical data; a team of people giving hardware, software and administrative support. The Starlink Project has been in operation since 1980 to provide UK astronomers with interactive image processing and data reduction facilities. There are now Starlink computer systems at 25 UK locations, serving about 1500 registered users. The Starlink software collection now has about 25 major packages covering a wide range of astronomical data reduction and analysis techniques, as well as many smaller programs and utilities. At the core of most of the packages is a common `software environment', which provides many of the functions which applications need and offers standardized methods of structuring and accessing data. The software environment simplifies programming and support, and makes it easy to use different packages for different stages of the data reduction. Users see a consistent style, and can mix applications without hitting problems of differing data formats. The Project group coordinates the writing and distribution of this software collection, which is Unix based. Outside the UK, Starlink is used at a large number of places, which range from installations at major UK telescopes, which are Starlink-compatible and managed like Starlink sites, to individuals who run only small parts of the Starlink software collection.

  2. Upgrade Software and Computing

    The LHCb Collaboration, CERN

    2018-01-01

    This document reports the Research and Development activities that are carried out in the software and computing domains in view of the upgrade of the LHCb experiment. The implementation of a full software trigger implies major changes in the core software framework, in the event data model, and in the reconstruction algorithms. The increase of the data volumes for both real and simulated datasets requires a corresponding scaling of the distributed computing infrastructure. An implementation plan in both domains is presented, together with a risk assessment analysis.

  3. Inhibitory capacity of Rhus coriaria L. extract and its major component methyl gallate on Streptococcus mutans biofilm formation by optical profilometry: Potential applications for oral health.

    Kacergius, Tomas; Abu-Lafi, Saleh; Kirkliauskiene, Agne; Gabe, Vika; Adawi, Azmi; Rayan, Mahmoud; Qutob, Mutaz; Stukas, Rimantas; Utkus, Algirdas; Zeidan, Mouhammad; Rayan, Anwar

    2017-07-01

    Streptococcus mutans (S. mutans) bacterium is the most well recognized pathogen involved in pathogenesis of dental caries. Its virulence arises from its ability to produce a biofilm and acidogenicity, causing tooth decay. Discovery of natural products capable to inhibit biofilm formation is of high importance for developing health care products. To the best of our knowledge, in all previous scientific reports, a colorimetric assay was applied to test the effect of sumac and methyl gallate (MG) on S. mutans adherence. Quantitative assessment of the developed biofilm should be further performed by applying an optical profilometry assay, and by testing the effect on both surface roughness and thickness parameters of the biofilm. To the best of our knowledge, this is the first study to report the effect of sumac extract and its constituent MG on biofilm formation using an optical profilometry assay. Testing antibacterial activity of the sumac extract and its fractions revealed that MG is the most bioactive component against S. mutans bacteria. It reduced S. mutans biofilm biomass on the polystyrene surface by 68‑93%, whereas 1 mg/ml MG was able to decrease the biofilm roughness and thickness on the glass surface by 99%. MG also prevented a decrease in pH level by 97%. These bioactivities of MG occurred in a dose‑dependent manner and were significant vs. untreated bacteria. The findings are important for the development of novel pharmaceuticals and formulations of natural products and extracts that possess anti‑biofilm activities with primary applications for oral health, and in a broader context, for the treatment of various bacterial infections.

  4. Natural deep eutectic solvents as the major mobile phase components in high-performance liquid chromatography-searching for alternatives to organic solvents.

    Sutton, Adam T; Fraige, Karina; Leme, Gabriel Mazzi; da Silva Bolzani, Vanderlan; Hilder, Emily F; Cavalheiro, Alberto J; Arrua, R Dario; Funari, Cristiano Soleo

    2018-06-01

    Over the past six decades, acetonitrile (ACN) has been the most employed organic modifier in reversed-phase high-performance liquid chromatography (RP-HPLC), followed by methanol (MeOH). However, from the growing environmental awareness that leads to the emergence of "green analytical chemistry," new research has emerged that includes finding replacements to problematic ACN because of its low sustainability. Deep eutectic solvents (DES) can be produced from an almost infinite possible combinations of compounds, while being a "greener" alternative to organic solvents in HPLC, especially those prepared from natural compounds called natural DES (NADES). In this work, the use of three NADES as the main organic component in RP-HPLC, rather than simply an additive, was explored and compared to the common organic solvents ACN and MeOH but additionally to the greener ethanol for separating two different mixtures of compounds, one demonstrating the elution of compounds with increasing hydrophobicity and the other comparing molecules of different functionality and molar mass. To utilize NADES as an organic modifier and overcome their high viscosity monolithic columns, temperatures at 50 °C and 5% ethanol in the mobile phase were used. NADES are shown to give chromatographic performances in between those observed for ACN and MeOH when eluotropic strength, resolution, and peak capacity were taken into consideration, while being less environmentally impactful as shown by the HPLC-Environmental Assessment Tool (HPLC-EAT) metric. With the development of proper technologies, DES could open a new class of mobile phases increasing the possibilities of new separation selectivities while reducing the environmental impact of HPLC analyses. Graphical abstract Natural deep eutectic solvents versus traditional solvents in HPLC.

  5. Software design for the EBT-P data acquisition and control system R and D

    Boyd, R.A.

    1983-01-01

    The instrumentation and control system for the EBT-P device is composed of a hierarchy of programmable logic controllers, microprocessor-based data acquisition computers, and a large minicomputer-based facility computer system. The software being developed to support this data acquisition and control system is necessarily quite complex due to several requirements imposed upon the EBT-P overall design criteria. These requirements, which include such considerations as overall reliability, operator interface, real-time display, interprocessor communication, and minimum cost to build, operate, and maintain, dictate that the software be developed in a well structured and controlled manner. To this end, structured software engineering practices are being applied to the design and development of the EBT-P data acquistion and control software. The design process began with the production of a software Requirements Document which describes the hardware and software environment in which the software development takes place. It identifies the major deliverable software items to be produced and describes the practices to be used to design and develop the software. The software design is split into three components: the facility computer software, the microcomputer software, and the PLC software. Within these physical boundaries, the following five functions are defined: data acquisition, display, communication, storage, and control. The software design is further detailed in a Structured Specification Document for each of the three physical components. Each specification describes the software in detailed terms so that a programmer can directly write the required software. Each specification is composed of: data flow diagrams, a data dictionary, structure diagrams, and program design language mini-specifications. Examples of the design issues exposed and addressed during the structured decomposition of EBT-P software processes are discussed in detail

  6. CD40-CD40 Ligand Pathway is a Major Component of Acute Neuroinflammation and Contributes to Long-term Cognitive Dysfunction after Sepsis.

    Michels, Monique; Danieslki, Lucinéia Gainski; Vieira, Andriele; Florentino, Drielly; Dall'Igna, Dhébora; Galant, Letícia; Sonai, Beatriz; Vuolo, Francieli; Mina, Franciele; Pescador, Bruna; Dominguini, Diogo; Barichello, Tatiana; Quevedo, João; Dal-Pizzol, Felipe; Petronilho, Fabrícia

    2015-03-26

    Sepsis-associated encephalopathy (SAE) is associated with an increased rate of morbidity and mortality. It is not understood what the exact mechanism is for the brain dysfunction that occurs in septic patients, but brain inflammation and oxidative stress are a possible theory. Such events can occur through the alteration of molecules that perpetuate the inflammatory response. Thus, it is possible to postulate that CD40 may be involved in this process. The aim of this work is to evaluate the role of CD40-CD40L pathway activation in brain dysfunction associated with sepsis in an animal model. Microglia activation induces the upregulation of CD40-CD40L, both in vitro and in vivo. The inhibition of microglia activation decreases levels of CD40-CD40L in the brain and decreases brain inflammation, oxidative damage and blood brain barrier dysfunction. Despite this, anti-CD40 treatment does not improve mortality in this model. However, it is able to improve long-term cognitive impairment in sepsis survivors. In conclusion, there is a major involvement of the CD40-CD40L signaling pathway in long-term brain dysfunction in an animal model of sepsis.

  7. CD40–CD40 Ligand Pathway Is a Major Component of Acute Neuroinflammation and Contributes to Long-term Cognitive Dysfunction after Sepsis

    Michels, Monique; Danieslki, Lucinéia Gainski; Vieira, Andriele; Florentino, Drielly; Dall’Igna, Dhébora; Galant, Letícia; Sonai, Beatriz; Vuolo, Francieli; Mina, Franciele; Pescador, Bruna; Dominguini, Diogo; Barichello, Tatiana; Quevedo, João; Dal-Pizzol, Felipe; Petronilho, Fabrícia

    2015-01-01

    Sepsis-associated encephalopathy (SAE) is associated with an increased rate of morbidity and mortality. It is not understood what the exact mechanism is for the brain dysfunction that occurs in septic patients, but brain inflammation and oxidative stress are a possible theory. Such events can occur through the alteration of molecules that perpetuate the inflammatory response. Thus, it is possible to postulate that CD40 may be involved in this process. The aim of this work is to evaluate the role of CD40–CD40L pathway activation in brain dysfunction associated with sepsis in an animal model. Microglia activation induces the upregulation of CD40–CD40L, both in vitro and in vivo. The inhibition of microglia activation decreases levels of CD40–CD40L in the brain and decreases brain inflammation, oxidative damage and blood brain barrier dysfunction. Despite this, anti-CD40 treatment does not improve mortality in this model. However, it is able to improve long-term cognitive impairment in sepsis survivors. In conclusion, there is a major involvement of the CD40–CD40L signaling pathway in long-term brain dysfunction in an animal model of sepsis. PMID:25822797

  8. Purification, crystallization and preliminary X-ray characterization of prunin-1, a major component of the almond (Prunus dulcis) allergen amandin.

    Albillos, Silvia M; Jin, Tengchuan; Howard, Andrew; Zhang, Yuzhu; Kothary, Mahendra H; Fu, Tong-Jen

    2008-07-09

    The 11S globulins from plant seeds account for a number of major food allergens. Because of the interest in the structural basis underlying the allergenicity of food allergens, we sought to crystallize the main 11S seed storage protein from almond ( Prunus dulcis). Prunin-1 (Pru1) was purified from defatted almond flour by water extraction, cryoprecipitation, followed by sequential anion exchange, hydrophobic interaction, and size exclusion chromatography. Single crystals of Pru1 were obtained in a screening with a crystal screen kit, using the hanging-drop vapor diffusion method. Diffraction quality crystals were grown after optimization. The Pru1 crystals diffracted to at least 3.0 A and belong to the tetragonal space group P4(1)22, with unit cell parameters of a = b = 150.912 A, c = 165.248 A. Self-rotation functions and molecular replacement calculations showed that there are three molecules in the asymmetry unit with water content of 51.41%. The three Pru1 protomers are related by a noncrystallographic 3-fold axis and they form a doughnut-shaped trimer. Two prunin trimers form a homohexamer. Elucidation of prunin structure will allow further characterization of the allergenic features of the 11S protein allergens at the molecular level.

  9. Purification, Crystallization and Preliminary X-ray Characterization of Prunin-1, a Major Component of the Almond (Prunus dulcis) Allergen Amandin

    Albillos, Silvia M.; Jin, Tengchuan; Howard, Andrew; Zhang, Yuzhu; Kothary, Mahendra H.; Fu, Tong-Jen (IIT); (US-FDA)

    2008-08-04

    The 11S globulins from plant seeds account for a number of major food allergens. Because of the interest in the structural basis underlying the allergenicity of food allergens, we sought to crystallize the main 11S seed storage protein from almond (Prunus dulcis). Prunin-1 (Pru1) was purified from defatted almond flour by water extraction, cryoprecipitation, followed by sequential anion exchange, hydrophobic interaction, and size exclusion chromatography. Single crystals of Pru1 were obtained in a screening with a crystal screen kit, using the hanging-drop vapor diffusion method. Diffraction quality crystals were grown after optimization. The Pru1 crystals diffracted to at least 3.0 {angstrom} and belong to the tetragonal space group P4{sub 1}22, with unit cell parameters of a = b = 150.912 {angstrom}, c = 165.248 {angstrom}. Self-rotation functions and molecular replacement calculations showed that there are three molecules in the asymmetry unit with water content of 51.41%. The three Pru1 protomers are related by a noncrystallographic 3-fold axis and they form a doughnut-shaped trimer. Two prunin trimers form a homohexamer. Elucidation of prunin structure will allow further characterization of the allergenic features of the 11S protein allergens at the molecular level.

  10. Software Innovation

    Rose, Jeremy

      Innovation is the forgotten key to modern systems development - the element that defines the enterprising engineer, the thriving software firm and the cutting edge software application.  Traditional forms of technical education pay little attention to creativity - often encouraging overly...

  11. Component-resolved microarray analysis of IgE sensitization profiles to Felis catus major allergen molecules in Russian cat-allergic patients.

    Dolgova, Anna Sergeevna; Sudina, Anna Evgenevna; Cherkashina, Anna Sergeevna; Stukolova, Olga Alekseevna

    We aimed to determine the profile of IgE reactivity to three major cat allergens, Fel d 1, Fel d 2 and Fel d 4, in cat-allergic patients in the Moscow region in Russia. sIgE levels to recombinant proteins expressed in Escherichia coli (Fel d 1 and Fel d 4) and to Fel d 2 protein purified from cat serum were measured using a microarray method developed in our laboratory. Sera from 174 anonymous subjects with a positive reaction (≥0.35 IU/mL) to cat dander extract (e1, ImmunoCAP) and 56 negative controls were used for IgE testing. Fel d 1 was recognized by 92.5%, Fel d 2 by 29.9% and Fel d 4 by 39.1% of the tested patient sera. The sensitivity to these three proteins was approximately 98% compared to cat dander extract (correlation coefficient to ImmunoCAP is 0.94 with PPV = 0.99 and NPV = 0.95). These predictive values appeared to be even more statistically significant than the divergence between the ISAC IgE test and the extract-based singleplex ImmunoCAP. The combination of the three investigated proteins (Fel d 1, Fel d 2 and Fel d 4) is suitable for in vitro molecular (serological) diagnosis of cat allergy in this region as a complement to cat dander extract. Moreover, with this method, we found distinction between Fel d 2 and other Feline sIgEs formation.

  12. Effects and mechanisms of Shaofu-Zhuyu decoction and its major bioactive component for Cold - Stagnation and Blood - Stasis primary dysmenorrhea rats.

    Huang, Xiaochen; Su, Shulan; Duan, Jin-Ao; Sha, Xiuxiu; Zhu, Kavin Yue; Guo, Jianming; Yu, Li; Liu, Pei; Shang, Erxin; Qian, Dawei

    2016-06-20

    Traditional Chinese medicine (TCM) is used under the guidance of the theory of traditional Chinese medical sciences in clinical application. The Chinese herbal formula, Shaofu Zhuyu decoction (SFZYD), is considered as an effective prescription for treating Cold - Stagnation and Blood - Stasis (CSBS) primary dysmenorrhea. The previous studies showed the SFZYD exhibited significant anti-inflammation and analgesic effect. In this present study the metabolomics of CSBS primary dysmenorrhea diseased rats and the cytokine transcription in PHA stimulated-PBMC were investigated to explore the effects and mechanisms. Explore a valuable insight into the effects and mechanisms of SFZYD on Cold - Stagnation and Blood - Stasis primary dysmenorrhea rats. We established CSBS primary dysmenorrhea diseased rats according the clinical symptoms. A targeted tandem mass spectrometry (MS/MS)-based metabolomic platform was used to evaluate the metabolic profiling changes and the intervention effects by SFZYD. The PBMC cell was adopted to explore the mechanisms by analyzing the signaling pathway evaluated by expression of inflammatory cytokines, c-jun and c-fos and corresponding phosphorylation levels. Estradiol, oxytocin, progesterone, endothelin, β-endorphin and PGF2α were restored back to the normal level after the treatment of SFZYD. Total twenty-five metabolites (10 in plasma and 15 in urine), up-regulated or down-regulated, were identified. These identified biomarkers underpinning the metabolic pathway including pentose and glucuronate interconversions, steroid hormone biosynthesis, and glycerophospholipid metabolism are disturbed in model rats. Among these metabolites, twenty one potential biomarkers were regulated after SFZYD treated. The compound of paeoniflorin, a major bioactive compound in SFZYD, was proved to regulate the MAPK signaling pathway by inhibiting the expression of IL-1β, IL-2, IL-10, IL-12, TNFα, INFγ, c-jun and c-fos in PHA stimulated-PBMC. These findings

  13. Software Components for Serious Game Development

    Westera, Wim; Van der Vegt, Wim; Bahreini, Kiavash; Dascalu, Mihai; Van Lankveld, Giel

    2016-01-01

    The large upfront investments required for game development pose a severe barrier for the wider uptake of serious games in education and training. Also, there is a lack of well-established methods and tools that support game developers at preserving and enhancing the games’ pedagogical

  14. Components of a Business Intelligence software solution

    Daniel BALACEANU

    2007-01-01

    Business intelligence (BI) is a business management term which refers to applications and technologies which are used to gather, provide access to, and analyze data and information about company operations. Business intelligence systems can help companies have a more comprehensive knowledge of the factors affecting their business, such as metrics on sales, production, internal operations, and they can help companies to make better business decisions.

  15. Software requirements

    Wiegers, Karl E

    2003-01-01

    Without formal, verifiable software requirements-and an effective system for managing them-the programs that developers think they've agreed to build often will not be the same products their customers are expecting. In SOFTWARE REQUIREMENTS, Second Edition, requirements engineering authority Karl Wiegers amplifies the best practices presented in his original award-winning text?now a mainstay for anyone participating in the software development process. In this book, you'll discover effective techniques for managing the requirements engineering process all the way through the development cy

  16. NASA software documentation standard software engineering program

    1991-01-01

    The NASA Software Documentation Standard (hereinafter referred to as Standard) can be applied to the documentation of all NASA software. This Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. This basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

  17. A software engineering process for safety-critical software application

    Kang, Byung Heon; Kim, Hang Bae; Chang, Hoon Seon; Jeon, Jong Sun

    1995-01-01

    Application of computer software to safety-critical systems in on the increase. To be successful, the software must be designed and constructed to meet the functional and performance requirements of the system. For safety reason, the software must be demonstrated not only to meet these requirements, but also to operate safely as a component within the system. For longer-term cost consideration, the software must be designed and structured to ease future maintenance and modifications. This paper presents a software engineering process for the production of safety-critical software for a nuclear power plant. The presentation is expository in nature of a viable high quality safety-critical software development. It is based on the ideas of a rational design process and on the experience of the adaptation of such process in the production of the safety-critical software for the shutdown system number two of Wolsung 2, 3 and 4 nuclear power generation plants. This process is significantly different from a conventional process in terms of rigorous software development phases and software design techniques, The process covers documentation, design, verification and testing using mathematically precise notations and highly reviewable tabular format to specify software requirements and software requirements and software requirements and code against software design using static analysis. The software engineering process described in this paper applies the principle of information-hiding decomposition in software design using a modular design technique so that when a change is required or an error is detected, the affected scope can be readily and confidently located. it also facilitates a sense of high degree of confidence in the 'correctness' of the software production, and provides a relatively simple and straightforward code implementation effort. 1 figs., 10 refs. (Author)

  18. Software Engineering for Human Spaceflight

    Fredrickson, Steven E.

    2014-01-01

    The Spacecraft Software Engineering Branch of NASA Johnson Space Center (JSC) provides world-class products, leadership, and technical expertise in software engineering, processes, technology, and systems management for human spaceflight. The branch contributes to major NASA programs (e.g. ISS, MPCV/Orion) with in-house software development and prime contractor oversight, and maintains the JSC Engineering Directorate CMMI rating for flight software development. Software engineering teams work with hardware developers, mission planners, and system operators to integrate flight vehicles, habitats, robotics, and other spacecraft elements. They seek to infuse automation and autonomy into missions, and apply new technologies to flight processor and computational architectures. This presentation will provide an overview of key software-related projects, software methodologies and tools, and technology pursuits of interest to the JSC Spacecraft Software Engineering Branch.

  19. Software Reviews.

    Dwyer, Donna; And Others

    1989-01-01

    Reviewed are seven software packages for Apple and IBM computers. Included are: "Toxicology"; "Science Corner: Space Probe"; "Alcohol and Pregnancy"; "Science Tool Kit Plus"; Computer Investigations: Plant Growth"; "Climatrolls"; and "Animal Watch: Whales." (CW)

  20. Software Reviews.

    Davis, Shelly J., Ed.; Knaupp, Jon, Ed.

    1984-01-01

    Reviewed is computer software on: (1) classification of living things, a tutorial program for grades 5-10; and (2) polynomial practice using tiles, a drill-and-practice program for algebra students. (MNS)

  1. Software Reviews.

    Miller, Anne, Ed.; Radziemski, Cathy, Ed.

    1988-01-01

    Three pieces of computer software are described and reviewed: HyperCard, to build and use varied applications; Iggy's Gnees, for problem solving with shapes in grades kindergarten-two; and Algebra Shop, for practicing skills and problem solving. (MNS)

  2. Criteria for the selection of ERP software

    2007-01-01

    Full Text Available The implementation of an ERP software package is an important investment for an organization, which is characterized also by a high degree of risk. Selecting the most appropriate software is a necessary condition for a successful implementation. This paper is describing the major aspects of software selection in general and the relevant criteria in the case of ERP software.

  3. Software management issues

    Kunz, P.F.

    1990-06-01

    The difficulty of managing the software in large HEP collaborations appears to becoming progressively worst with each new generation of detector. If one were to extrapolate to the SSC, it will become a major problem. This paper explores the possible causes of the difficulty and makes suggestions on what corrective actions should be taken

  4. Use of Commericially Available Software in an Attribute Measurement System

    MacArthur, Duncan W.; Bracken, David S.; Carrillo, Louis A.; Elmont, Timothy H.; Frame, Katherine C.; Hirsch, Karen L.

    2005-01-01

    A major issue in international safeguards of nuclear materials is the ability to verify that processes and materials in nuclear facilities are consistent with declaration without revealing sensitive information. An attribute measurement system (AMS) is a non-destructive assay (NDA) system that utilizes an information barrier to protect potentially sensitive information about the measurement item. A key component is the software utilized for operator interface, data collection, analysis, and attribute determination, as well as the operating system under which they are implemented. Historically, custom software has been used almost exclusively in transparency applications, and it is unavoidable that some amount of custom software is needed. The focus of this paper is to explore the extent to which commercially available software may be used and the relative merits.

  5. Software engineering

    Thorin, Marc

    1985-01-01

    Software Engineering describes the conceptual bases as well as the main methods and rules on computer programming. This book presents software engineering as a coherent and logically built synthesis and makes it possible to properly carry out an application of small or medium difficulty that can later be developed and adapted to more complex cases. This text is comprised of six chapters and begins by introducing the reader to the fundamental notions of entities, actions, and programming. The next two chapters elaborate on the concepts of information and consistency domains and show that a proc

  6. PyBus -- A Python Software Bus

    Lavrijsen, W

    2005-01-01

    A software bus, just like its hardware equivalent, allows for the discovery, installation, configuration, loading, unloading, and run-time replacement of software components, as well as channeling of inter-component communication. Python, a popular open-source programming language, encourages a modular design on software written in it, but it offers little or no component functionality. However, the language and its interpreter provide sufficient hooks to implement a thin, integral layer...

  7. ORNL's DCAL software package

    Eckerman, K.F.

    2007-01-01

    Oak Ridge National Laboratory has released its Dose and Risk Calculation software, DCAL. DCAL, developed with the support of the U.S. Environmental Protection Agency, consists of a series of computational modules, driven in either an interactive or a batch mode for computation of dose and risk coefficients from intakes of radionuclides or exposure to radionuclides in environmental media. The software package includes extensive libraries of biokinetic and dosimetric data that represent the current state of the art. The software has unique capability for addressing intakes of radionuclides by non-adults. DCAL runs as 32-bit extended DOS and console applications under Windows 98/NT/2000/XP. It is intended for users familiar with the basic elements of computational radiation dosimetry. Components of DCAL have been used to prepare U.S. Environmental Protection Agency's Federal Guidance Reports 12 and 13 and several publications of the International Commission on Radiological Protection. (author)

  8. Reviews, Software.

    Science Teacher, 1988

    1988-01-01

    Reviews two computer software packages for use in physical science, physics, and chemistry classes. Includes "Physics of Model Rocketry" for Apple II, and "Black Box" for Apple II and IBM compatible computers. "Black Box" is designed to help students understand the concept of indirect evidence. (CW)

  9. Software Reviews.

    Kinnaman, Daniel E.; And Others

    1988-01-01

    Reviews four educational software packages for Apple, IBM, and Tandy computers. Includes "How the West was One + Three x Four,""Mavis Beacon Teaches Typing,""Math and Me," and "Write On." Reviews list hardware requirements, emphasis, levels, publisher, purchase agreements, and price. Discusses the strengths…

  10. Software Review.

    McGrath, Diane, Ed.

    1989-01-01

    Reviewed is a computer software package entitled "Audubon Wildlife Adventures: Grizzly Bears" for Apple II and IBM microcomputers. Included are availability, hardware requirements, cost, and a description of the program. The murder-mystery flavor of the program is stressed in this program that focuses on illegal hunting and game…

  11. Software Reviews.

    Teles, Elizabeth, Ed.; And Others

    1990-01-01

    Reviewed are two computer software packages for Macintosh microcomputers including "Phase Portraits," an exploratory graphics tool for studying first-order planar systems; and "MacMath," a set of programs for exploring differential equations, linear algebra, and other mathematical topics. Features, ease of use, cost, availability, and hardware…

  12. MIAWARE Software

    Wilkowski, Bartlomiej; Pereira, Oscar N. M.; Dias, Paulo

    2008-01-01

    is automatically generated. Furthermore, MIAWARE software is accompanied with an intelligent search engine for medical reports, based on the relations between parts of the lungs. A logical structure of the lungs is introduced to the search algorithm through the specially developed ontology. As a result...

  13. RAGE Architecture for Reusable Serious Gaming Technology Components

    Wim van der Vegt

    2016-01-01

    Full Text Available For seizing the potential of serious games, the RAGE project—funded by the Horizon-2020 Programme of the European Commission—will make available an interoperable set of advanced technology components (software assets that support game studios at serious game development. This paper describes the overall software architecture and design conditions that are needed for the easy integration and reuse of such software assets in existing game platforms. Based on the component-based software engineering paradigm the RAGE architecture takes into account the portability of assets to different operating systems, different programming languages, and different game engines. It avoids dependencies on external software frameworks and minimises code that may hinder integration with game engine code. Furthermore it relies on a limited set of standard software patterns and well-established coding practices. The RAGE architecture has been successfully validated by implementing and testing basic software assets in four major programming languages (C#, C++, Java, and TypeScript/JavaScript, resp.. Demonstrator implementation of asset integration with an existing game engine was created and validated. The presented RAGE architecture paves the way for large scale development and application of cross-engine reusable software assets for enhancing the quality and diversity of serious gaming.

  14. Applied software risk management a guide for software project managers

    Pandian, C Ravindranath

    2006-01-01

    Few software projects are completed on time, on budget, and to their original specifications. Focusing on what practitioners need to know about risk in the pursuit of delivering software projects, Applied Software Risk Management: A Guide for Software Project Managers covers key components of the risk management process and the software development process, as well as best practices for software risk identification, risk planning, and risk analysis. Written in a clear and concise manner, this resource presents concepts and practical insight into managing risk. It first covers risk-driven project management, risk management processes, risk attributes, risk identification, and risk analysis. The book continues by examining responses to risk, the tracking and modeling of risks, intelligence gathering, and integrated risk management. It concludes with details on drafting and implementing procedures. A diary of a risk manager provides insight in implementing risk management processes.Bringing together concepts ...

  15. Agile software development

    Stober, Thomas

    2009-01-01

    Software Development is moving towards a more agile and more flexible approach. It turns out that the traditional 'waterfall' model is not supportive in an environment where technical, financial and strategic constraints are changing almost every day. But what is agility? What are today's major approaches? And especially: What is the impact of agile development principles on the development teams, on project management and on software architects? How can large enterprises become more agile and improve their business processes, which have been existing since many, many years? What are the limit

  16. Software Safety and Security

    Nipkow, T; Hauptmann, B

    2012-01-01

    Recent decades have seen major advances in methods and tools for checking the safety and security of software systems. Automatic tools can now detect security flaws not only in programs of the order of a million lines of code, but also in high-level protocol descriptions. There has also been something of a breakthrough in the area of operating system verification. This book presents the lectures from the NATO Advanced Study Institute on Tools for Analysis and Verification of Software Safety and Security; a summer school held at Bayrischzell, Germany, in 2011. This Advanced Study Institute was

  17. Machine Tool Software

    1988-01-01

    A NASA-developed software package has played a part in technical education of students who major in Mechanical Engineering Technology at William Rainey Harper College. Professor Hack has been using (APT) Automatically Programmed Tool Software since 1969 in his CAD/CAM Computer Aided Design and Manufacturing curriculum. Professor Hack teaches the use of APT programming languages for control of metal cutting machines. Machine tool instructions are geometry definitions written in APT Language to constitute a "part program." The part program is processed by the machine tool. CAD/CAM students go from writing a program to cutting steel in the course of a semester.

  18. What makes Software Design Effective

    Tang, A.; Aleti, A.; Burge, J.; van Vliet, J.C.

    2010-01-01

    Software design is a complex cognitive process in which decision making plays a major role, but our understanding of how decisions are made is limited, especially with regards to reasoning with design problems and formulation of design solutions. In this research, we have observed software designers

  19. Flight Software Math Library

    McComas, David

    2013-01-01

    The flight software (FSW) math library is a collection of reusable math components that provides typical math utilities required by spacecraft flight software. These utilities are intended to increase flight software quality reusability and maintainability by providing a set of consistent, well-documented, and tested math utilities. This library only has dependencies on ANSI C, so it is easily ported. Prior to this library, each mission typically created its own math utilities using ideas/code from previous missions. Part of the reason for this is that math libraries can be written with different strategies in areas like error handling, parameters orders, naming conventions, etc. Changing the utilities for each mission introduces risks and costs. The obvious risks and costs are that the utilities must be coded and revalidated. The hidden risks and costs arise in miscommunication between engineers. These utilities must be understood by both the flight software engineers and other subsystem engineers (primarily guidance navigation and control). The FSW math library is part of a larger goal to produce a library of reusable Guidance Navigation and Control (GN&C) FSW components. A GN&C FSW library cannot be created unless a standardized math basis is created. This library solves the standardization problem by defining a common feature set and establishing policies for the library s design. This allows the libraries to be maintained with the same strategy used in its initial development, which supports a library of reusable GN&C FSW components. The FSW math library is written for an embedded software environment in C. This places restrictions on the language features that can be used by the library. Another advantage of the FSW math library is that it can be used in the FSW as well as other environments like the GN&C analyst s simulators. This helps communication between the teams because they can use the same utilities with the same feature set and syntax.

  20. Finding upper bounds for software failure probabilities - experiments and results

    Kristiansen, Monica; Winther, Rune

    2005-09-01

    This report looks into some aspects of using Bayesian hypothesis testing to find upper bounds for software failure probabilities. In the first part, the report evaluates the Bayesian hypothesis testing approach for finding upper bounds for failure probabilities of single software components. The report shows how different choices of prior probability distributions for a software component's failure probability influence the number of tests required to obtain adequate confidence in a software component. In the evaluation, both the effect of the shape of the prior distribution as well as one's prior confidence in the software component were investigated. In addition, different choices of prior probability distributions are discussed based on their relevance in a software context. In the second part, ideas on how the Bayesian hypothesis testing approach can be extended to assess systems consisting of multiple software components are given. One of the main challenges when assessing systems consisting of multiple software components is to include dependency aspects in the software reliability models. However, different types of failure dependencies between software components must be modelled differently. Identifying different types of failure dependencies are therefore an important condition for choosing a prior probability distribution, which correctly reflects one's prior belief in the probability for software components failing dependently. In this report, software components include both general in-house software components, as well as pre-developed software components (e.g. COTS, SOUP, etc). (Author)

  1. The software development process in worldwide collaborations

    Amako, K.

    1998-01-01

    High energy physics experiments in future colliders are inevitably large scale international collaborations. In these experiments, software development has to be done by a large number of physicists, software engineers and computer scientists, dispersed all over the world. The major subject of this paper is to discuss on various aspects of software development in the worldwide environment. These include software engineering and methodology, software development process and management. (orig.)

  2. Overview of the software for the Telemation/Sandia unattended video surveillance system

    Merillat, P.D.

    1979-10-01

    A microprocessor has been used to provide the major control functions in the Telemation/Sandia unattended video surveillance system. The software in the microprocessor provides control of the various hardware components and provides the capability of interactive communications with the operator. This document, in conjunction with the commented source listing, defines the philosophy and function of the software. It is assumed that the reader is familiar with the RCA 1802 COSMAC microprocessor and has a reasonable computer science background

  3. Modular Software for Spacecraft Navigation Using the Global Positioning System (GPS)

    Truong, S. H.; Hartman, K. R.; Weidow, D. A.; Berry, D. L.; Oza, D. H.; Long, A. C.; Joyce, E.; Steger, W. L.

    1996-01-01

    The Goddard Space Flight Center Flight Dynamics and Mission Operations Divisions have jointly investigated the feasibility of engineering modular Global Positioning SYSTEM (GPS) navigation software to support both real time flight and ground postprocessing configurations. The goals of this effort are to define standard GPS data interfaces and to engineer standard, reusable navigation software components that can be used to build a broad range of GPS navigation support applications. The paper discusses the GPS modular software (GMOD) system and operations concepts, major requirements, candidate software architecture, feasibility assessment and recommended software interface standards. In additon, ongoing efforts to broaden the scope of the initial study and to develop modular software to support autonomous navigation using GPS are addressed,

  4. Software Tools for Software Maintenance

    1988-10-01

    COMMUNICATIONS, AND COMPUTER SCIENCES I ,(AIRMICS) FO~SOFTWARE TOOLS (.o FOR SOF1 ’ARE MAINTENANCE (ASQBG-1-89-001) October, 1988 DTIC ELECTE -ifB...SUNWW~. B..c Program An~Iysw HA.c C-Tractr C Cobol Stncturing Facility VS Cobol 11 F-Scan Foctma Futbol Cobol Fortran Sltiuc Code Anaiyaer Fortran IS

  5. GCS component development cycle

    Rodríguez, Jose A.; Macias, Rosa; Molgo, Jordi; Guerra, Dailos; Pi, Marti

    2012-09-01

    The GTC1 is an optical-infrared 10-meter segmented mirror telescope at the ORM observatory in Canary Islands (Spain). First light was at 13/07/2007 and since them it is in the operation phase. The GTC control system (GCS) is a distributed object & component oriented system based on RT-CORBA8 and it is responsible for the management and operation of the telescope, including its instrumentation. GCS has used the Rational Unified process (RUP9) in its development. RUP is an iterative software development process framework. After analysing (use cases) and designing (UML10) any of GCS subsystems, an initial component description of its interface is obtained and from that information a component specification is written. In order to improve the code productivity, GCS has adopted the code generation to transform this component specification into the skeleton of component classes based on a software framework, called Device Component Framework. Using the GCS development tools, based on javadoc and gcc, in only one step, the component is generated, compiled and deployed to be tested for the first time through our GUI inspector. The main advantages of this approach are the following: It reduces the learning curve of new developers and the development error rate, allows a systematic use of design patterns in the development and software reuse, speeds up the deliverables of the software product and massively increase the timescale, design consistency and design quality, and eliminates the future refactoring process required for the code.

  6. Belle II Software

    Kuhr, T; Ritter, M

    2016-01-01

    Belle II is a next generation B factory experiment that will collect 50 times more data than its predecessor, Belle. The higher luminosity at the SuperKEKB accelerator leads to higher background levels and requires a major upgrade of the detector. As a consequence, the simulation, reconstruction, and analysis software must also be upgraded substantially. Most of the software has been redesigned from scratch, taking into account the experience from Belle and other experiments and utilizing new technologies. The large amount of experimental and simulated data requires a high level of reliability and reproducibility, even in parallel environments. Several technologies, tools, and organizational measures are employed to evaluate and monitor the performance of the software during development. (paper)

  7. New Media as Software

    Manuel Portela

    2014-03-01

    Full Text Available Review of Lev Manovich, Software Takes Command: Extending the Language of New Media. London: Bloomsbury, 2013, 358 pp. ISBN 978-1-6235-6817-7. In Lev Manovich’s most recent book, this programmatic interrogation of our medial condition leads to the following question: do media still exist after software? This is the question that triggers Manovich’s dialogue both with computing history and with theories of digital media of recent decades, including the extension of his own previous formulations in The Language of New Media, published in 2001, and which became a major reference work in the field. The subtitle of the new book points precisely to this critical revisiting of his earlier work in the context of ubiquitous computing and accelerated transcoding of social, cultural and artistic practices by software.

  8. LHCb software strategy

    Van Herwijnen, Eric

    1998-01-01

    This document describes the software strategy of the LHCb experiment. The main objective is to reuse designs and code wherever possible; We will implement an architecturally driven design process; This architectural process will be implemented using Object Technology; We aim for platform indepence; try to take advantage of distributed computing and will use industry standards, commercial software and profit from HEP developments; We will implement a common software process and development environment. One of the major problems that we are immediately faced with is the conversion of our current code from Fortran into an Object Oriented language and the conversion of our current developers to Object technology. Some technical terms related to OO programming are defined in Annex A.1

  9. EPIQR software

    Flourentzos, F. [Federal Institute of Technology, Lausanne (Switzerland); Droutsa, K. [National Observatory of Athens, Athens (Greece); Wittchen, K.B. [Danish Building Research Institute, Hoersholm (Denmark)

    1999-11-01

    The support of the EPIQR method is a multimedia computer program. Several modules help the users of the method to treat the data collected during a diagnosis survey, to set up refurbishment scenario and calculate their cost or energy performance, and finally to visualize the results in a comprehensive way and to prepare quality reports. This article presents the structure and the main features of the software. (au)

  10. Software quality assurance plans for safety-critical software

    Liddle, P.

    2006-01-01

    Application software is defined as safety-critical if a fault in the software could prevent the system components from performing their nuclear-safety functions. Therefore, for nuclear-safety systems, the AREVA TELEPERM R XS (TXS) system is classified 1E, as defined in the Inst. of Electrical and Electronics Engineers (IEEE) Std 603-1998. The application software is classified as Software Integrity Level (SIL)-4, as defined in IEEE Std 7-4.3.2-2003. The AREVA NP Inc. Software Program Manual (SPM) describes the measures taken to ensure that the TELEPERM XS application software attains a level of quality commensurate with its importance to safety. The manual also describes how TELEPERM XS correctly performs the required safety functions and conforms to established technical and documentation requirements, conventions, rules, and standards. The program manual covers the requirements definition, detailed design, integration, and test phases for the TELEPERM XS application software, and supporting software created by AREVA NP Inc. The SPM is required for all safety-related TELEPERM XS system applications. The program comprises several basic plans and practices: 1. A Software Quality-Assurance Plan (SQAP) that describes the processes necessary to ensure that the software attains a level of quality commensurate with its importance to safety function. 2. A Software Safety Plan (SSP) that identifies the process to reasonably ensure that safety-critical software performs as intended during all abnormal conditions and events, and does not introduce any new hazards that could jeopardize the health and safety of the public. 3. A Software Verification and Validation (V and V) Plan that describes the method of ensuring the software is in accordance with the requirements. 4. A Software Configuration Management Plan (SCMP) that describes the method of maintaining the software in an identifiable state at all times. 5. A Software Operations and Maintenance Plan (SO and MP) that

  11. Software preservation

    Tadej Vodopivec

    2011-01-01

    Full Text Available Comtrade Ltd. covers a wide range of activities related to information and communication technologies; its deliverables include web applications, locally installed programs,system software, drivers, embedded software (used e.g. in medical devices, auto parts,communication switchboards. Also the extensive knowledge and practical experience about digital long-term preservation technologies have been acquired. This wide spectrum of activities puts us in the position to discuss the often overlooked aspect of the digital preservation - preservation of software programs. There are many resources dedicated to digital preservation of digital data, documents and multimedia records,but not so many about how to preserve the functionalities and features of computer programs. Exactly these functionalities - dynamic response to inputs - render the computer programs rich compared to documents or linear multimedia. The article opens the questions on the beginning of the way to the permanent digital preservation. The purpose is to find a way in the right direction, where all relevant aspects will be covered in proper balance. The following questions are asked: why at all to preserve computer programs permanently, who should do this and for whom, when we should think about permanent program preservation, what should be persevered (such as source code, screenshots, documentation, and social context of the program - e.g. media response to it ..., where and how? To illustrate the theoretic concepts given the idea of virtual national museum of electronic banking is also presented.

  12. Major depression

    Depression - major; Depression - clinical; Clinical depression; Unipolar depression; Major depressive disorder ... providers do not know the exact causes of depression. It is believed that chemical changes in the ...

  13. Verification of safety critical software

    Son, Ki Chang; Chun, Chong Son; Lee, Byeong Joo; Lee, Soon Sung; Lee, Byung Chai

    1996-01-01

    To assure quality of safety critical software, software should be developed in accordance with software development procedures and rigorous software verification and validation should be performed. Software verification is the formal act of reviewing, testing of checking, and documenting whether software components comply with the specified requirements for a particular stage of the development phase[1]. New software verification methodology was developed and was applied to the Shutdown System No. 1 and 2 (SDS1,2) for Wolsung 2,3 and 4 nuclear power plants by Korea Atomic Energy Research Institute(KAERI) and Atomic Energy of Canada Limited(AECL) in order to satisfy new regulation requirements of Atomic Energy Control Boars(AECB). Software verification methodology applied to SDS1 for Wolsung 2,3 and 4 project will be described in this paper. Some errors were found by this methodology during the software development for SDS1 and were corrected by software designer. Outputs from Wolsung 2,3 and 4 project have demonstrated that the use of this methodology results in a high quality, cost-effective product. 15 refs., 6 figs. (author)

  14. Maximum Entropy Discrimination Poisson Regression for Software Reliability Modeling.

    Chatzis, Sotirios P; Andreou, Andreas S

    2015-11-01

    Reliably predicting software defects is one of the most significant tasks in software engineering. Two of the major components of modern software reliability modeling approaches are: 1) extraction of salient features for software system representation, based on appropriately designed software metrics and 2) development of intricate regression models for count data, to allow effective software reliability data modeling and prediction. Surprisingly, research in the latter frontier of count data regression modeling has been rather limited. More specifically, a lack of simple and efficient algorithms for posterior computation has made the Bayesian approaches appear unattractive, and thus underdeveloped in the context of software reliability modeling. In this paper, we try to address these issues by introducing a novel Bayesian regression model for count data, based on the concept of max-margin data modeling, effected in the context of a fully Bayesian model treatment with simple and efficient posterior distribution updates. Our novel approach yields a more discriminative learning technique, making more effective use of our training data during model inference. In addition, it allows of better handling uncertainty in the modeled data, which can be a significant problem when the training data are limited. We derive elegant inference algorithms for our model under the mean-field paradigm and exhibit its effectiveness using the publicly available benchmark data sets.

  15. Establishing software quality assurance

    Malsbury, J.

    1983-01-01

    This paper is concerned with four questions about establishing software QA: What is software QA. Why have software QA. What is the role of software QA. What is necessary to ensure the success of software QA

  16. Distribution and communication in software engineering environments. Application to the HELIOS Software Bus.

    Jean, F. C.; Jaulent, M. C.; Coignard, J.; Degoulet, P.

    1991-01-01

    Modularity, distribution and integration are current trends in Software Engineering. To reach these goals HELIOS, a distributive Software Engineering Environment dedicated to the medical field, has been conceived and a prototype implemented. This environment is made by the collaboration of several, well encapsulated Software Components. This paper presents the architecture retained to allow communication between the different components and focus on the implementation details of the Software ...

  17. Effective Software Engineering Leadership for Development Programs

    Cagle West, Marsha

    2010-01-01

    Software is a critical component of systems ranging from simple consumer appliances to complex health, nuclear, and flight control systems. The development of quality, reliable, and effective software solutions requires the incorporation of effective software engineering processes and leadership. Processes, approaches, and methodologies for…

  18. Physics Validation of the LHC Software

    CERN. Geneva

    2004-01-01

    The LHC Software will be confronted to unprecedented challenges as soon as the LHC will turn on. We summarize the main Software requirements coming from the LHC detectors, triggers and physics, and we discuss several examples of Software components developed by the experiments and the LCG project (simulation, reconstruction, etc.), their validation, and their adequacy for LHC physics.

  19. The Evolution of Software Publication in Astronomy

    Cantiello, Matteo

    2018-01-01

    Software is a fundamental component of the scientific research process. As astronomical discoveries increasingly rely on complex numerical calculations and the analysis of big data sets, publishing and documenting software is a fundamental step in ensuring transparency and reproducibility of results. I will briefly discuss the recent history of software publication and highlight the challenges and opportunities ahead.

  20. Software quality metrics aggregation in industry

    Mordal, K.; Anquetil, N.; Laval, J.; Serebrenik, A.; Vasilescu, B.N.; Ducasse, S.

    2013-01-01

    With the growing need for quality assessment of entire software systems in the industry, new issues are emerging. First, because most software quality metrics are defined at the level of individual software components, there is a need for aggregation methods to summarize the results at the system

  1. Evaluation methods for corrosion damage of components in cooling systems of nuclear power plants by coupling analysis of corrosion and flow dynamics (1). Major targets and development strategies of the evaluation methods

    Naitoh, Masanori; Uchida, Shunsuke; Koshizuka, Seiichi; Ninokata, Hisashi; Hiranuma, Naoki; Dosaki, Koji; Nishida, Koji; Akiyama, Minoru; Saitoh, Hiroaki

    2008-01-01

    Problems in major components and structural materials in nuclear power plants have often been caused by flow induced vibration and corrosion and their overlapping effects. In order to establish safe and reliable plant operation, future problems for structural materials should be predicted based on combined analyses of flow dynamics and corrosion and they should be mitigated before becoming serious issues for plant operation. Three approaches have been prepared for predicting future problems in structural materials: 1. Computer program packages for predicting future corrosion fatigue on structural materials, 2. Computer program packages for predicting future corrosion damage on structural materials, and 3. Computer program packages for predicting wall thinning caused by flow accelerated corrosion. General features of evaluation methods and their computer packages, technical innovations required for their development, and application plans for the developed approaches for plant operation are introduced in this paper. (author)

  2. Pybus - A Python Software Bus

    Lavrijsen, Wim T.L.P.

    2004-01-01

    A software bus, just like its hardware equivalent, allows for the discovery, installation, configuration, loading, unloading, and run-time replacement of software components, as well as channeling of inter-component communication. Python, a popular open-source programming language, encourages a modular design on software written in it, but it offers little or no component functionality. However, the language and its interpreter provide sufficient hooks to implement a thin, integral layer of component support. This functionality can be presented to the developer in the form of a module, making it very easy to use. This paper describes a Pythonmodule, PyBus, with which the concept of a ''software bus'' can be realized in Python. It demonstrates, within the context of the ATLAS software framework Athena, how PyBus can be used for the installation and (run-time) configuration of software, not necessarily Python modules, from a Python application in a way that is transparent to the end-user

  3. Rapid and sensitive determination of major polyphenolic components in Euphoria longana Lam. seeds using matrix solid-phase dispersion extraction and UHPLC with hybrid linear ion trap triple quadrupole mass spectrometry.

    Rathore, Atul S; Sathiyanarayanan, L; Deshpande, Shreekant; Mahadik, Kakasaheb R

    2016-11-01

    A rapid and sensitive method for the extraction and determination of four major polyphenolic components in Euphoria longana Lam. seeds is presented for the first time based on matrix solid-phase dispersion extraction followed by ultra high performance liquid chromatography with hybrid triple quadrupole linear ion trap mass spectrometry. Matrix solid-phase dispersion method was designed for the extraction of Euphoria longana seed constituents and compared with microwave-assisted extraction and ultrasonic-assisted extraction methods. An Ultra high performance liquid chromatography with hybrid triple quadrupole linear ion-trap mass spectrometry method was developed for quantitative analysis in multiple-reaction monitoring mode in negative electrospray ionization. The chromatographic separation was accomplished using an ACQUITY UPLC BEH C 18 (2.1 mm × 50 mm, 1.7 μm) column with gradient elution of 0.1% aqueous formic acid and 0.1% formic acid in acetonitrile. The developed method was validated with acceptable linearity (r 2 > 0.999), precision (RSD ≤ 2.22%) and recovery (RSD ≤ 2.35%). The results indicated that matrix solid-phase dispersion produced comparable extraction efficiency compared with other methods nevertheless was more convenient and time-saving with reduced requirements on sample and solvent volumes. The proposed method is rapid and sensitive in providing a promising alternative for extraction and comprehensive determination of active components for quality control of Euphoria longana products. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Software Prototyping

    Del Fiol, Guilherme; Hanseler, Haley; Crouch, Barbara Insley; Cummins, Mollie R.

    2016-01-01

    Summary Background Health information exchange (HIE) between Poison Control Centers (PCCs) and Emergency Departments (EDs) could improve care of poisoned patients. However, PCC information systems are not designed to facilitate HIE with EDs; therefore, we are developing specialized software to support HIE within the normal workflow of the PCC using user-centered design and rapid prototyping. Objective To describe the design of an HIE dashboard and the refinement of user requirements through rapid prototyping. Methods Using previously elicited user requirements, we designed low-fidelity sketches of designs on paper with iterative refinement. Next, we designed an interactive high-fidelity prototype and conducted scenario-based usability tests with end users. Users were asked to think aloud while accomplishing tasks related to a case vignette. After testing, the users provided feedback and evaluated the prototype using the System Usability Scale (SUS). Results Survey results from three users provided useful feedback that was then incorporated into the design. After achieving a stable design, we used the prototype itself as the specification for development of the actual software. Benefits of prototyping included having 1) subject-matter experts heavily involved with the design; 2) flexibility to make rapid changes, 3) the ability to minimize software development efforts early in the design stage; 4) rapid finalization of requirements; 5) early visualization of designs; 6) and a powerful vehicle for communication of the design to the programmers. Challenges included 1) time and effort to develop the prototypes and case scenarios; 2) no simulation of system performance; 3) not having all proposed functionality available in the final product; and 4) missing needed data elements in the PCC information system. PMID:27081404

  5. Computing and software

    White, G. C.

    2004-06-01

    Full Text Available The reality is that the statistical methods used for analysis of data depend upon the availability of software. Analysis of marked animal data is no different than the rest of the statistical field. The methods used for analysis are those that are available in reliable software packages. Thus, the critical importance of having reliable, up–to–date software available to biologists is obvious. Statisticians have continued to develop more robust models, ever expanding the suite of potential analysis methods available. But without software to implement these newer methods, they will languish in the abstract, and not be applied to the problems deserving them. In the Computers and Software Session, two new software packages are described, a comparison of implementation of methods for the estimation of nest survival is provided, and a more speculative paper about how the next generation of software might be structured is presented. Rotella et al. (2004 compare nest survival estimation with different software packages: SAS logistic regression, SAS non–linear mixed models, and Program MARK. Nests are assumed to be visited at various, possibly infrequent, intervals. All of the approaches described compute nest survival with the same likelihood, and require that the age of the nest is known to account for nests that eventually hatch. However, each approach offers advantages and disadvantages, explored by Rotella et al. (2004. Efford et al. (2004 present a new software package called DENSITY. The package computes population abundance and density from trapping arrays and other detection methods with a new and unique approach. DENSITY represents the first major addition to the analysis of trapping arrays in 20 years. Barker & White (2004 discuss how existing software such as Program MARK require that each new model’s likelihood must be programmed specifically for that model. They wishfully think that future software might allow the user to combine

  6. Core Community Specifications for Electron Microprobe Operating Systems: Software, Quality Control, and Data Management Issues

    Fournelle, John; Carpenter, Paul

    2006-01-01

    Modem electron microprobe systems have become increasingly sophisticated. These systems utilize either UNIX or PC computer systems for measurement, automation, and data reduction. These systems have undergone major improvements in processing, storage, display, and communications, due to increased capabilities of hardware and software. Instrument specifications are typically utilized at the time of purchase and concentrate on hardware performance. The microanalysis community includes analysts, researchers, software developers, and manufacturers, who could benefit from exchange of ideas and the ultimate development of core community specifications (CCS) for hardware and software components of microprobe instrumentation and operating systems.

  7. Global Software Engineering: A Software Process Approach

    Richardson, Ita; Casey, Valentine; Burton, John; McCaffery, Fergal

    Our research has shown that many companies are struggling with the successful implementation of global software engineering, due to temporal, cultural and geographical distance, which causes a range of factors to come into play. For example, cultural, project managementproject management and communication difficulties continually cause problems for software engineers and project managers. While the implementation of efficient software processes can be used to improve the quality of the software product, published software process models do not cater explicitly for the recent growth in global software engineering. Our thesis is that global software engineering factors should be included in software process models to ensure their continued usefulness in global organisations. Based on extensive global software engineering research, we have developed a software process, Global Teaming, which includes specific practices and sub-practices. The purpose is to ensure that requirements for successful global software engineering are stipulated so that organisations can ensure successful implementation of global software engineering.

  8. Terra Harvest software architecture

    Humeniuk, Dave; Klawon, Kevin

    2012-06-01

    Under the Terra Harvest Program, the DIA has the objective of developing a universal Controller for the Unattended Ground Sensor (UGS) community. The mission is to define, implement, and thoroughly document an open architecture that universally supports UGS missions, integrating disparate systems, peripherals, etc. The Controller's inherent interoperability with numerous systems enables the integration of both legacy and future UGS System (UGSS) components, while the design's open architecture supports rapid third-party development to ensure operational readiness. The successful accomplishment of these objectives by the program's Phase 3b contractors is demonstrated via integration of the companies' respective plug-'n'-play contributions that include controllers, various peripherals, such as sensors, cameras, etc., and their associated software drivers. In order to independently validate the Terra Harvest architecture, L-3 Nova Engineering, along with its partner, the University of Dayton Research Institute, is developing the Terra Harvest Open Source Environment (THOSE), a Java Virtual Machine (JVM) running on an embedded Linux Operating System. The Use Cases on which the software is developed support the full range of UGS operational scenarios such as remote sensor triggering, image capture, and data exfiltration. The Team is additionally developing an ARM microprocessor-based evaluation platform that is both energy-efficient and operationally flexible. The paper describes the overall THOSE architecture, as well as the design decisions for some of the key software components. Development process for THOSE is discussed as well.

  9. Web components and the semantic web

    Casey, Maire; Pahl, Claus

    2003-01-01

    Component-based software engineering on the Web differs from traditional component and software engineering. We investigate Web component engineering activites that are crucial for the development,com position, and deployment of components on the Web. The current Web Services and Semantic Web initiatives strongly influence our work. Focussing on Web component composition we develop description and reasoning techniques that support a component developer in the composition activities,fo cussing...

  10. Applying of component system development in object methodology

    Milan Mišovič

    2013-01-01

    software system and referred to as software alliance.In both of these mentioned publications there is delivered ​​deep philosophy of relevant issues relating to SWC / SWA as creating copies of components (cloning, the establishment and destruction of components at software run-time (dynamic reconfiguration, cooperation of autonomous components, programmable management of components interface in depending on internal components functionality and customer requirements (functionality, security, versioning.Nevertheless, even today we can meet numerous cases of SWC / SWA existence, with a highly developed architecture that is accepting vast majority of these requests. On the other hand, in the development practice of component-based systems with a dynamic architecture (i.e. architecture with dynamic reconfiguration, and finally with a mobile architecture (i.e. architecture with dynamic component mobility confirms the inadequacy of the design methods contained in UML 2.0. It proves especially the dissertation thesis (Rych, Weis, 2008. Software Engineering currently has two different approaches to systems SWC / SWA. The first approach is known as component-oriented software development CBD (Component based Development. According to (Szyper, 2002 that is a collection of CBD methodologies that are heavily focused on the setting up and software components re-usability within the architecture. Although CBD does not show high theoretical approach, nevertheless, it is classified under the general evolution of SDP (Software Development Process, see (Sommer, 2010 as one of its two dominant directions.From a structural point of view, a software system consists of self-contained, interoperable architectural units – components based on well-defined interfaces. Classical procedural object-oriented methodologies significantly do not use the component meta-models, based on which the target component systems are formed, then. Component meta-models describe the syntax, semantics of

  11. Software system safety

    Uber, James G.

    1988-01-01

    Software itself is not hazardous, but since software and hardware share common interfaces there is an opportunity for software to create hazards. Further, these software systems are complex, and proven methods for the design, analysis, and measurement of software safety are not yet available. Some past software failures, future NASA software trends, software engineering methods, and tools and techniques for various software safety analyses are reviewed. Recommendations to NASA are made based on this review.

  12. Software-based acoustical measurements

    Miyara, Federico

    2017-01-01

    This textbook provides a detailed introduction to the use of software in combination with simple and economical hardware (a sound level meter with calibrated AC output and a digital recording system) to obtain sophisticated measurements usually requiring expensive equipment. It emphasizes the use of free, open source, and multiplatform software. Many commercial acoustical measurement systems use software algorithms as an integral component; however the methods are not disclosed. This book enables the reader to develop useful algorithms and provides insight into the use of digital audio editing tools to document features in the signal. Topics covered include acoustical measurement principles, in-depth critical study of uncertainty applied to acoustical measurements, digital signal processing from the basics, and metrologically-oriented spectral and statistical analysis of signals. The student will gain a deep understanding of the use of software for measurement purposes; the ability to implement software-based...

  13. SOA-Driven Business-Software Alignment

    Shishkov, Boris; van Sinderen, Marten J.; Quartel, Dick; Tsai, W.; Chung, J.; Younas, M.

    2006-01-01

    The alignment of business processes and their supporting application software is a major concern during the initial software design phases. This paper proposes a design approach addressing this problem of business-software alignment. The approach takes an initial business model as a basis in

  14. HALOE test and evaluation software

    Edmonds, W.; Natarajan, S.

    1987-01-01

    Computer programming, system development and analysis efforts during this contract were carried out in support of the Halogen Occultation Experiment (HALOE) at NASA/Langley. Support in the major areas of data acquisition and monitoring, data reduction and system development are described along with a brief explanation of the HALOE project. Documented listings of major software are located in the appendix.

  15. Software Configurable Multichannel Transceiver

    Freudinger, Lawrence C.; Cornelius, Harold; Hickling, Ron; Brooks, Walter

    2009-01-01

    Emerging test instrumentation and test scenarios increasingly require network communication to manage complexity. Adapting wireless communication infrastructure to accommodate challenging testing needs can benefit from reconfigurable radio technology. A fundamental requirement for a software-definable radio system is independence from carrier frequencies, one of the radio components that to date has seen only limited progress toward programmability. This paper overviews an ongoing project to validate the viability of a promising chipset that performs conversion of radio frequency (RF) signals directly into digital data for the wireless receiver and, for the transmitter, converts digital data into RF signals. The Software Configurable Multichannel Transceiver (SCMT) enables four transmitters and four receivers in a single unit the size of a commodity disk drive, programmable for any frequency band between 1 MHz and 6 GHz.

  16. Component-based development process and component lifecycle

    Crnkovic, I.; Chaudron, M.R.V.; Larsson, S.

    2006-01-01

    The process of component- and component-based system development differs in many significant ways from the "classical" development process of software systems. The main difference is in the separation of the development process of components from the development process of systems. This fact has a

  17. Effective Results Analysis for the Similar Software Products’ Orthogonality

    Ion Ivan

    2009-10-01

    Full Text Available It is defined the concept of similar software. There are established conditions of archiving the software components. It is carried out the orthogonality evaluation and the correlation between the orthogonality and the complexity of the homogenous software components is analyzed. Shall proceed to build groups of similar software products, belonging to the orthogonality intervals. There are presented in graphical form the results of the analysis. There are detailed aspects of the functioning of the software product allocated for the orthogonality.

  18. Hirabayashi, Satoshi; Kroll, Charles N.; Nowak, David J. 2011. Component-based development and sensitivity analyses of an air pollutant dry deposition model. Environmental Modelling & Software. 26(6): 804-816.

    Satoshi Hirabayashi; Chuck Kroll; David Nowak

    2011-01-01

    The Urban Forest Effects-Deposition model (UFORE-D) was developed with a component-based modeling approach. Functions of the model were separated into components that are responsible for user interface, data input/output, and core model functions. Taking advantage of the component-based approach, three UFORE-D applications were developed: a base application to estimate...

  19. Software Architecture Evolution

    2013-12-01

    system’s major components occurring via a Java Message Service message bus [69]. This architecture was designed to promote loose coupling of soft- ware...play reconfiguration of the system. The components were Java -based and platform-independent; the interfaces by which they communicated were based on...The MPCS database, a MySQL database used for storing telemetry as well as some other information, such as logs and commanding data [68]. This

  20. Software Quality Assurance for Nuclear Safety Systems

    Sparkman, D R; Lagdon, R

    2004-01-01

    The US Department of Energy has undertaken an initiative to improve the quality of software used to design and operate their nuclear facilities across the United States. One aspect of this initiative is to revise or create new directives and guides associated with quality practices for the safety software in its nuclear facilities. Safety software includes the safety structures, systems, and components software and firmware, support software and design and analysis software used to ensure the safety of the facility. DOE nuclear facilities are unique when compared to commercial nuclear or other industrial activities in terms of the types and quantities of hazards that must be controlled to protect workers, public and the environment. Because of these differences, DOE must develop an approach to software quality assurance that ensures appropriate risk mitigation by developing a framework of requirements that accomplishes the following goals: (sm b ullet) Ensures the software processes developed to address nuclear safety in design, operation, construction and maintenance of its facilities are safe (sm b ullet) Considers the larger system that uses the software and its impacts (sm b ullet) Ensures that the software failures do not create unsafe conditions Software designers for nuclear systems and processes must reduce risks in software applications by incorporating processes that recognize, detect, and mitigate software failure in safety related systems. It must also ensure that fail safe modes and component testing are incorporated into software design. For nuclear facilities, the consideration of risk is not necessarily sufficient to ensure safety. Systematic evaluation, independent verification and system safety analysis must be considered for software design, implementation, and operation. The software industry primarily uses risk analysis to determine the appropriate level of rigor applied to software practices. This risk-based approach distinguishes safety

  1. Software Innovation - Values for a Methodology

    Aaen, Ivan

    2013-01-01

    Innovation is a recurrent theme in public as well as academic debate, and software development plays a major role for innovation in about every sector of our economy. As a consequence, software innovation will play an increasingly important role in software development. The focus in this paper is...... for experimentation, learning, and flexibility in software projects, but how can this change be used to facilitate software innovation? This paper proposes a set of values to guide the development of a methodology to facilitate software innovation....

  2. Future Scenarios for Software-Defined Metro and Access Networks and Software-Defined Photonics

    Tommaso Muciaccia

    2017-01-01

    Full Text Available In recent years, architectures, devices, and components in telecommunication networks have been challenged by evolutionary and revolutionary factors which are drastically changing the traffic features. Most of these changes imply the need for major re-configurability and programmability not only in data-centers and core networks, but also in the metro-access segment. In a wide variety of contexts, this necessity has been addressed by the proposed introduction of the innovative paradigm of software-defined networks (SDNs. Several solutions inspired by the SDN model have been recently proposed also for metro and access networks, where the adoption of a new generation of software-defined reconfigurable integrated photonic devices is highly desirable. In this paper, we review the possible future application scenarios for software-defined metro and access networks and software-defined photonics (SDP, on the base of analytics, statistics, and surveys. This work describes the reasons underpinning the presented radical change of paradigm and summarizes the most significant solutions proposed in literature, with a specific emphasis to physical-layer reconfigurable networks and a focus on both architectures and devices.

  3. Software Reuse Within the Earth Science Community

    Marshall, James J.; Olding, Steve; Wolfe, Robert E.; Delnore, Victor E.

    2006-01-01

    Scientific missions in the Earth sciences frequently require cost-effective, highly reliable, and easy-to-use software, which can be a challenge for software developers to provide. The NASA Earth Science Enterprise (ESE) spends a significant amount of resources developing software components and other software development artifacts that may also be of value if reused in other projects requiring similar functionality. In general, software reuse is often defined as utilizing existing software artifacts. Software reuse can improve productivity and quality while decreasing the cost of software development, as documented by case studies in the literature. Since large software systems are often the results of the integration of many smaller and sometimes reusable components, ensuring reusability of such software components becomes a necessity. Indeed, designing software components with reusability as a requirement can increase the software reuse potential within a community such as the NASA ESE community. The NASA Earth Science Data Systems (ESDS) Software Reuse Working Group is chartered to oversee the development of a process that will maximize the reuse potential of existing software components while recommending strategies for maximizing the reusability potential of yet-to-be-designed components. As part of this work, two surveys of the Earth science community were conducted. The first was performed in 2004 and distributed among government employees and contractors. A follow-up survey was performed in 2005 and distributed among a wider community, to include members of industry and academia. The surveys were designed to collect information on subjects such as the current software reuse practices of Earth science software developers, why they choose to reuse software, and what perceived barriers prevent them from reusing software. In this paper, we compare the results of these surveys, summarize the observed trends, and discuss the findings. The results are very

  4. Sandia software guidelines: Software quality planning

    1987-08-01

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standard for Software Quality Assurance Plans, this volume identifies procedures to follow in producing a Software Quality Assurance Plan for an organization or a project, and provides an example project SQA plan. 2 figs., 4 tabs.

  5. Dependability Analysis Methods For Configurable Software

    Dahll, Gustav; Pulkkinen, Urho

    1996-01-01

    Configurable software systems are systems which are built up by standard software components in the same way as a hardware system is built up by standard hardware components. Such systems are often used in the control of NPPs, also in safety related applications. A reliability analysis of such systems is therefore necessary. This report discusses what configurable software is, and what is particular with respect to reliability assessment of such software. Two very commonly used techniques in traditional reliability analysis, viz. failure mode, effect and criticality analysis (FMECA) and fault tree analysis are investigated. A real example is used to illustrate the discussed methods. Various aspects relevant to the assessment of the software reliability in such systems are discussed. Finally some models for quantitative software reliability assessment applicable on configurable software systems are described. (author)

  6. Avoidable Software Procurements

    2012-09-01

    software license, software usage, ELA, Software as a Service , SaaS , Software Asset...PaaS Platform as a Service SaaS Software as a Service SAM Software Asset Management SMS System Management Server SEWP Solutions for Enterprise Wide...delivery of full Cloud Services , we will see the transition of the Cloud Computing service model from Iaas to SaaS , or Software as a Service . Software

  7. Theoretical Foundations of Software Technology.

    1983-02-14

    major research interests are software testing, aritificial intelligence , pattern recogu- tion, and computer graphics. Dr. Chandranekaran is currently...produce PASCAL language code for the problems. Because of its relationship to many issues in Artificial Intelligence , we also investigated problems of...analysis to concurmt-prmcess software re- are not " intelligent " enough to discover these by themselves, ouirl more complex control flow models. The PAF

  8. Validating Timed Component Contracts

    Le Guilly, Thibaut; Liu, Shaoying; Olsen, Petur

    2015-01-01

    This paper presents a technique for testing software components with contracts that specify functional behavior, synchronization, as well as timing behavior. The approach combines elements from unit testing with model-based testing techniques for timed automata. The technique is implemented...... in an online testing tool, and we demonstrate its use on a concrete use case....

  9. Software engineering architecture-driven software development

    Schmidt, Richard F

    2013-01-01

    Software Engineering: Architecture-driven Software Development is the first comprehensive guide to the underlying skills embodied in the IEEE's Software Engineering Body of Knowledge (SWEBOK) standard. Standards expert Richard Schmidt explains the traditional software engineering practices recognized for developing projects for government or corporate systems. Software engineering education often lacks standardization, with many institutions focusing on implementation rather than design as it impacts product architecture. Many graduates join the workforce with incomplete skil

  10. DA+ data acquisition and analysis software at the Swiss Light Source macromolecular crystallography beamlines.

    Wojdyla, Justyna Aleksandra; Kaminski, Jakub W; Panepucci, Ezequiel; Ebner, Simon; Wang, Xiaoqiang; Gabadinho, Jose; Wang, Meitian

    2018-01-01

    Data acquisition software is an essential component of modern macromolecular crystallography (MX) beamlines, enabling efficient use of beam time at synchrotron facilities. Developed at the Paul Scherrer Institute, the DA+ data acquisition software is implemented at all three Swiss Light Source (SLS) MX beamlines. DA+ consists of distributed services and components written in Python and Java, which communicate via messaging and streaming technologies. The major components of DA+ are the user interface, acquisition engine, online processing and database. Immediate data quality feedback is achieved with distributed automatic data analysis routines. The software architecture enables exploration of the full potential of the latest instrumentation at the SLS MX beamlines, such as the SmarGon goniometer and the EIGER X 16M detector, and development of new data collection methods.

  11. In-field inspection support software: A status report on the Common Inspection On-site Software Package (CIOSP) project

    Novatchev, Dimitre; Titov, Pavel; Siradjov, Bakhtiiar; Vlad, Ioan; Xiao Jing

    2001-01-01

    Full text: IAEA has invested much thought and effort into developing software that can assist inspectors during their inspection work. Experience with such applications has been steadily growing and IAEA has recently commissioned a next-generation software package. This kind of software accommodates inspection tasks that can vary substantially in function depending on the type of installation being inspected as well as ensures that the resulting software package has a wide range of usability and can preclude excessive development of plant-specific applications. The Common Inspection On-site Software Package is being developed in the Department of Safeguards to address the limitations of the existing software and to expand its coverage of the inspection process. CIOSP is 'common' in that it is aimed at providing support for as many facilities as possible with the minimum re-configuration. At the same time it has to cater to varying needs of individual facilities, different instrumentation and verification methods used. A component-based approach was taken to successfully tackle the challenges that the development of this software presented. CIOSP consists of the following major components: A framework into which individual plug-ins supporting various inspection activities can integrate at run-time; A central data store containing all facility configuration data and all data collected during inspections; A local data store, which resides on the inspector's computer, where the current inspection's data is stored; A set of services used by all plug-ins (i.e. data transformation, authentication, replication services etc.). This architecture allows for incremental development and extension of the software with plug-ins that support individual inspection activities. The core set of components along with the framework, the Inventory Verification, Book Examination and Records and Reports Comparison plug-ins have been developed. The development of the Short Notice Random

  12. Software dependability in the Tandem GUARDIAN system

    Lee, Inhwan; Iyer, Ravishankar K.

    1995-01-01

    Based on extensive field failure data for Tandem's GUARDIAN operating system this paper discusses evaluation of the dependability of operational software. Software faults considered are major defects that result in processor failures and invoke backup processes to take over. The paper categorizes the underlying causes of software failures and evaluates the effectiveness of the process pair technique in tolerating software faults. A model to describe the impact of software faults on the reliability of an overall system is proposed. The model is used to evaluate the significance of key factors that determine software dependability and to identify areas for improvement. An analysis of the data shows that about 77% of processor failures that are initially considered due to software are confirmed as software problems. The analysis shows that the use of process pairs to provide checkpointing and restart (originally intended for tolerating hardware faults) allows the system to tolerate about 75% of reported software faults that result in processor failures. The loose coupling between processors, which results in the backup execution (the processor state and the sequence of events) being different from the original execution, is a major reason for the measured software fault tolerance. Over two-thirds (72%) of measured software failures are recurrences of previously reported faults. Modeling, based on the data, shows that, in addition to reducing the number of software faults, software dependability can be enhanced by reducing the recurrence rate.

  13. Open source projects as incubators of innovation: From niche phenomenon to integral part of the software industry

    Schrape, Jan-Felix

    2017-01-01

    Over the last 20 years, open source development has become an integral part of the software industry and a key component of the innovation strategies of all major IT providers. Against this backdrop, this paper seeks to develop a systematic overview of open source communities and their socio-economic contexts. I begin with a reconstruction of the genesis of open source software projects and their changing relation- ships to established IT companies. This is followed by the identification of f...

  14. The genetic component of preeclampsia

    Hansen, Anette Tarp; Bernth Jensen, Jens Magnus; Hvas, Anne-Mette

    2018-01-01

    Preeclampsia is a major cause of maternal and perinatal deaths. The aetiology of preeclampsia is largely unknown but a polygenetic component is assumed. To explore this hypothesis, we performed an in-depth whole-exome sequencing study in women with (cases, N = 50) and without (controls, N = 50......) preeclampsia. The women were identified in an unselected cohort of 2,545 pregnant women based on data from the Danish National Patient Registry and the Medical Birth Registry. Matching DNA was obtained from a biobank containing excess blood from routine antenatal care visits. Novogene performed the whole......-exome sequencing blinded to preeclampsia status. Variants for comparison between cases and controls were filtered in the Ingenuity Variant Analysis software. We applied two different strategies; a disease association panel approach, which included variants in single genes associated with established clinical risk...

  15. The software life cycle

    Ince, Darrel

    1990-01-01

    The Software Life Cycle deals with the software lifecycle, that is, what exactly happens when software is developed. Topics covered include aspects of software engineering, structured techniques of software development, and software project management. The use of mathematics to design and develop computer systems is also discussed. This book is comprised of 20 chapters divided into four sections and begins with an overview of software engineering and software development, paying particular attention to the birth of software engineering and the introduction of formal methods of software develop

  16. Software Maintenance and Evolution: The Implication for Software ...

    PROF. O. E. OSUAGWU

    2013-06-01

    Jun 1, 2013 ... component of software development process. [25]. It is the ... technologies and stand the test of time. 2.0 Background of ..... costing and time span, and optimization of resource allocation have made long term estimation of ...

  17. Understanding software faults and their role in software reliability modeling

    Munson, John C.

    1994-01-01

    regression equation. Since most of the existing metrics have common elements and are linear combinations of these common elements, it seems reasonable to investigate the structure of the underlying common factors or components that make up the raw metrics. The technique we have chosen to use to explore this structure is a procedure called principal components analysis. Principal components analysis is a decomposition technique that may be used to detect and analyze collinearity in software metrics. When confronted with a large number of metrics measuring a single construct, it may be desirable to represent the set by some smaller number of variables that convey all, or most, of the information in the original set. Principal components are linear transformations of a set of random variables that summarize the information contained in the variables. The transformations are chosen so that the first component accounts for the maximal amount of variation of the measures of any possible linear transform; the second component accounts for the maximal amount of residual variation; and so on. The principal components are constructed so that they represent transformed scores on dimensions that are orthogonal. Through the use of principal components analysis, it is possible to have a set of highly related software attributes mapped into a small number of uncorrelated attribute domains. This definitively solves the problem of multi-collinearity in subsequent regression analysis. There are many software metrics in the literature, but principal component analysis reveals that there are few distinct sources of variation, i.e. dimensions, in this set of metrics. It would appear perfectly reasonable to characterize the measurable attributes of a program with a simple function of a small number of orthogonal metrics each of which represents a distinct software attribute domain.

  18. Major Links.

    Henderson, Tona

    1995-01-01

    Provides electronic mail addresses for resources and discussion groups related to the following academic majors: art, biology, business, chemistry, computer science, economics, health sciences, history, literature, math, music, philosophy, political science, psychology, sociology, and theater. (AEF)

  19. Major Roads

    Minnesota Department of Natural Resources — This data set contains roadway centerlines for major roads (interstates and trunk highways) found on the USGS 1:24,000 mapping series. These roadways are current...

  20. Models for composing software : an analysis of software composition and objects

    Bergmans, Lodewijk

    1999-01-01

    In this report, we investigate component-based software construction with a focus on composition. In particular we try to analyze the requirements and issues for components and software composition. As a means to understand this research area, we introduce a canonical model for representing

  1. First International Workshop on Variability in Software Architecture (VARSA 2011)

    Galster, Matthias; Avgeriou, Paris; Weyns, Danny; Mannisto, Tomi

    2011-01-01

    Variability is the ability of a software artifact to be changed for a specific context. Mechanisms to accommodate variability include software product lines, configuration wizards and tools in commercial software, configuration interfaces of software components, or the dynamic runtime composition of

  2. Comparative tissue distribution profiles of five major bio-active components in normal and blood deficiency rats after oral administration of Danggui Buxue Decoction by UPLC-TQ/MS.

    Shi, Xuqin; Tang, Yuping; Zhu, Huaxu; Li, Weixia; Li, Zhenhao; Li, Wei; Duan, Jin-ao

    2014-01-01

    Astragali Radix (AR) and Angelicae Sinensis Radix (ASR) were frequently combined and used in China as herbal pair called as Danggui Buxue Decoction (DBD) for treatment of blood deficiency syndrome, such as women's ailments. This study is to investigate the tissue distribution profiles of five major bio-active constituents (ferulic acid, caffeic acid, calycosin-7-O-β-glucoside, ononin and astragaloside IV) in DBD after oral administration of DBD in blood deficiency rats, and to compare the difference between normal and blood deficiency rats. The blood deficiency rats were induced by bleeding from orbit at the dosages of 5.0mLkg(-1) every day, and the experimental period was 12 days. At the finally day of experimental period, both normal and blood deficiency rats were orally administrated with DBD, and then the tissues samples were collected at different time points. Ferulic acid, caffeic acid, calycosin-7-O-β-glucoside, ononin and astragaloside IV in different tissues were detected simultaneously by UPLC-TQ/MS, and the histograms were drawn. The results showed that the overall trend was CLiver>CKidney>CHeart>CSpleen>CLung, CC-30min>CM-30min>CM-60min>CC-5min>CM-5min>CC-60min>CM-240min>CC-240min. The contents of the detected compounds in liver were more than that in other tissues no matter in normal or blood deficiency rats. Compared to normal rats, partial contents of the compounds in blood deficiency rats' tissues at different time points had significant difference (Pdistribution investigation in blood deficiency animals which is conducted by bleeding. And the results demonstrated that the five DBD components in normal and blood deficiency rats had obvious differences in some organs and time points, suggesting that the blood flow and perfusion rate of the organ were altered in blood deficiency animals. Copyright © 2013 Elsevier B.V. All rights reserved.

  3. Software Process Improvement

    Kuhrmann, Marco; Diebold, Philipp; Münch, Jürgen

    2016-01-01

    Software process improvement (SPI) is around for decades: frameworks are proposed, success factors are studied, and experiences have been reported. However, the sheer mass of concepts, approaches, and standards published over the years overwhelms practitioners as well as researchers. What is out...... to new specialized frameworks. New and specialized frameworks account for the majority of the contributions found (approx. 38%). Furthermore, we find a growing interest in success factors (approx. 16%) to aid companies in conducting SPI and in adapting agile principles and practices for SPI (approx. 10...

  4. A Field Study of Scale Economies in Software Maintenance

    Rajiv D. Banker; Sandra A. Slaughter

    1997-01-01

    Software maintenance is a major concern for organizations. Productivity gains in software maintenance can enable redeployment of Information Systems resources to other activities. Thus, it is important to understand how software maintenance productivity can be improved. In this study, we investigate the relationship between project size and software maintenance productivity. We explore scale economies in software maintenance by examining a number of software enhancement projects at a large fi...

  5. A Multi-mission Event-Driven Component-Based System for Support of Flight Software Development, ATLO, and Operations first used by the Mars Science Laboratory (MSL) Project

    Dehghani, Navid; Tankenson, Michael

    2006-01-01

    This viewgraph presentation reviews the architectural description of the Mission Data Processing and Control System (MPCS). MPCS is an event-driven, multi-mission ground data processing components providing uplink, downlink, and data management capabilities which will support the Mars Science Laboratory (MSL) project as its first target mission. MPCS is designed with these factors (1) Enabling plug and play architecture (2) MPCS has strong inheritance from GDS components that have been developed for other Flight Projects (MER, MRO, DAWN, MSAP), and are currently being used in operations and ATLO, and (3) MPCS components are Java-based, platform independent, and are designed to consume and produce XML-formatted data

  6. A Multi-mission Event-Driven Component-Based System for Support of Flight Software Development, ATLO, and Operations first used by the Mars Science Laboratory (MSL) Project

    Dehghani, Navid; Tankenson, Michael

    2006-01-01

    This paper details an architectural description of the Mission Data Processing and Control System (MPCS), an event-driven, multi-mission ground data processing components providing uplink, downlink, and data management capabilities which will support the Mars Science Laboratory (MSL) project as its first target mission. MPCS is developed based on a set of small reusable components, implemented in Java, each designed with a specific function and well-defined interfaces. An industry standard messaging bus is used to transfer information among system components. Components generate standard messages which are used to capture system information, as well as triggers to support the event-driven architecture of the system. Event-driven systems are highly desirable for processing high-rate telemetry (science and engineering) data, and for supporting automation for many mission operations processes.

  7. ESTSC - Software Best Practices

    DOE Scientific and Technical Software Best Practices December 2010 Table of Contents 1.0 Introduction 2.0 Responsibilities 2.1 OSTI/ESTSC 2.2 SIACs 2.3 Software Submitting Sites/Creators 2.4 Software Sensitivity Review 3.0 Software Announcement and Submission 3.1 STI Software Appropriate for Announcement 3.2

  8. Software Assurance Competency Model

    2013-03-01

    COTS) software , and software as a service ( SaaS ). L2: Define and analyze risks in the acquisition of contracted software , COTS software , and SaaS ...2010a]: Application of technologies and processes to achieve a required level of confidence that software systems and services function in the...

  9. A Software Development Platform for Mechatronic Systems

    Guan, Wei

    Software has become increasingly determinative for development of mechatronic systems, which underscores the importance of demands for shortened time-to-market, increased productivity, higher quality, and improved dependability. As the complexity of systems is dramatically increasing, these demands...... present a challenge to the practitioners who adopt conventional software development approach. An effective approach towards industrial production of software for mechatronic systems is needed. This approach requires a disciplined engineering process that encompasses model-driven engineering and component......-based software engineering, whereby we enable incremental software development using component models to address the essential design issues of real-time embedded systems. To this end, this dissertation presents a software development platform that provides an incremental model-driven development process based...

  10. Antenna Controller Replacement Software

    Chao, Roger Y.; Morgan, Scott C.; Strain, Martha M.; Rockwell, Stephen T.; Shimizu, Kenneth J.; Tehrani, Barzia J.; Kwok, Jaclyn H.; Tuazon-Wong, Michelle; Valtier, Henry; Nalbandi, Reza; hide

    2010-01-01

    The Antenna Controller Replacement (ACR) software accurately points and monitors the Deep Space Network (DSN) 70-m and 34-m high-efficiency (HEF) ground-based antennas that are used to track primarily spacecraft and, periodically, celestial targets. To track a spacecraft, or other targets, the antenna must be accurately pointed at the spacecraft, which can be very far away with very weak signals. ACR s conical scanning capability collects the signal in a circular pattern around the target, calculates the location of the strongest signal, and adjusts the antenna pointing to point directly at the spacecraft. A real-time, closed-loop servo control algorithm performed every 0.02 second allows accurate positioning of the antenna in order to track these distant spacecraft. Additionally, this advanced servo control algorithm provides better antenna pointing performance in windy conditions. The ACR software provides high-level commands that provide a very easy user interface for the DSN operator. The operator only needs to enter two commands to start the antenna and subreflector, and Master Equatorial tracking. The most accurate antenna pointing is accomplished by aligning the antenna to the Master Equatorial, which because of its small size and sheltered location, has the most stable pointing. The antenna has hundreds of digital and analog monitor points. The ACR software provides compact displays to summarize the status of the antenna, subreflector, and the Master Equatorial. The ACR software has two major functions. First, it performs all of the steps required to accurately point the antenna (and subreflector and Master Equatorial) at the spacecraft (or celestial target). This involves controlling the antenna/ subreflector/Master-Equatorial hardware, initiating and monitoring the correct sequence of operations, calculating the position of the spacecraft relative to the antenna, executing the real-time servo control algorithm to maintain the correct position, and

  11. Software attribute visualization for high integrity software

    Pollock, G.M.

    1998-03-01

    This report documents a prototype tool developed to investigate the use of visualization and virtual reality technologies for improving software surety confidence. The tool is utilized within the execution phase of the software life cycle. It provides a capability to monitor an executing program against prespecified requirements constraints provided in a program written in the requirements specification language SAGE. The resulting Software Attribute Visual Analysis Tool (SAVAnT) also provides a technique to assess the completeness of a software specification.

  12. Methods of software V and V for a programmable logic controller in NPPs

    Kim, Jang Yeol; Lee, Young Jun; Cha, Kyung Ho; Cheon, Se Woo; Son, Han Seong; Lee, Jang Soo; Kwon, Kee Choon

    2004-01-01

    This paper addresses the Verification and Validation (V and V) process and methodology for embedded real time software of a safety-grade Programmable Logic Controller(PLC). This safety-grade PLC is being developed in the Korea Nuclear Instrumentation and Control System (KNICS) projects. KNICS projects are developing a Reactor Protection System(RPS) and an Engineered Safety Feature-Component Control System (ESF-CCS) as well as safety-grade PLC. Safety-grade PLC will be a major component that composes the RPS systems and ESF-CCS systems as nuclear instruments and control equipments. This paper describes the V and V guidelines and procedure, V and V environment, V and V process and methodology, and the V and V tools by the KNICS projects. Specially, it describes the real-time operating system V and V experience which corresponds to the requirement analysis phase of the software development life cycle. Main activities of the real-time operating system Software Requirement Specification(SRS) V and V of the PLC are the technical evaluation, licensing suitability evaluation, inspection and traceability analysis, formal verification, software safety analysis, and software configuration management. The proposed V and V methodology satisfies the Standard Review Plan(SRP)/Branch Technical Position(BTP)-14(MOST-KSRG 7/Appendix 15 in Korea will be issued soon) criteria for the safety software in nuclear power plants. The proposed V and V methodology is going to verify the upcoming software life cycle in the KNICS projects. (author)

  13. V and V methods of a safety-critical software for a programmable logic controller

    Kim, Jang Yeol; Lee, Young Jun; Cha, Kyung Ho; Cheon, Se Woo; Lee, Jang Soo; Kwon, Kee Choon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kong, Seung Ju [Korea Hydro and Nuclear Power Co., Ltd, Daejeon (Korea, Republic of)

    2005-11-15

    This paper addresses the Verification an Validation(V and V) process and the methodology for an embedded real time software of a safety-grade Programmable Logic Controller(PLC). This safety-grade PLC is being developed as one of the Korean Nuclear Instrumentation and Control System(KNICS) project KNICS projects are developing a Reactor Protection System(RPS) and an Engineered Safety Feature-Component Control System(ESF-CCS) as well as a safety-grade PLC. The safety-grade PLC will be a major component that encomposes the RPS systems and the ESF-CCS systems as nuclear instruments and control equipment. This paper describes the V and V guidelines an procedures, V and V environment, V and V process and methodology, and the V and V tools in the KNICS projects. Specifically, it describes the real-time operating system V and V experience which corresponds to the requirement analysis phase, design phase and the implementation and testing phase of the software development life cycle. Main activities of the V and V for the PLC system software are a technical evaluation, licensing suitability evaluation, inspection and traceability analysis, formal verification, software safety analysis, and a software configuration management. The proposed V and V methodology satisfies the Standard Review Plan(SRP)/Branch Technical Position(BTP)-14 criteria for the safety software in nuclear power plants. The proposed V and V methodology is going to be used to verify the upcoming software life cycle in the KNICS projects.

  14. Software V and V methods for a safety - grade programmable logic controller

    Jang Yeol Kim; Young Jun Lee; Kyung Ho Cha; Se Woo Cheon; Jang Soo Lee; Kee Choon Kwon

    2006-01-01

    This paper addresses the Verification and Validation(V and V) process and the methodology for an embedded real time software of a safety-grade Programmable Logic Controller(PLC). This safety- grade PLC is being developed as one of the Korean Nuclear Instrumentation and Control System (KNICS) projects. KNICS projects are developing a Reactor Protection System(RPS) and an Engineered Safety Feature-Component Control System(ESF-CCS) as well as a safety-grade PLC. The safety-grade PLC will be a major component that encomposes the RPS systems and the ESF-CCS systems as nuclear instruments and control equipment. This paper describes the V and V guidelines and procedures, V and V environment, V and V process and methodology, and the V and V tools in the KNICS projects. Specifically, it describes the real-time operating system V and V experience which corresponds to the requirement analysis phase, design phase and the implementation and testing phase of the software development life cycle. Main activities of the V and V for the PLC system software are a technical evaluation, licensing suitability evaluation, inspection and traceability analysis, formal verification, software safety analysis, and a software configuration management. The proposed V and V methodology satisfies the Standard Review Plan(SRP)/Branch Technical Position(BTP)-14 criteria for the safety software in nuclear power plants. The proposed V and V methodology is going to be used to verify the upcoming software life cycle in the KNICS projects. (author)

  15. V and V methods of a safety-critical software for a programmable logic controller

    Kim, Jang Yeol; Lee, Young Jun; Cha, Kyung Ho; Cheon, Se Woo; Lee, Jang Soo; Kwon, Kee Choon; Kong, Seung Ju

    2005-01-01

    This paper addresses the Verification an Validation(V and V) process and the methodology for an embedded real time software of a safety-grade Programmable Logic Controller(PLC). This safety-grade PLC is being developed as one of the Korean Nuclear Instrumentation and Control System(KNICS) project KNICS projects are developing a Reactor Protection System(RPS) and an Engineered Safety Feature-Component Control System(ESF-CCS) as well as a safety-grade PLC. The safety-grade PLC will be a major component that encomposes the RPS systems and the ESF-CCS systems as nuclear instruments and control equipment. This paper describes the V and V guidelines an procedures, V and V environment, V and V process and methodology, and the V and V tools in the KNICS projects. Specifically, it describes the real-time operating system V and V experience which corresponds to the requirement analysis phase, design phase and the implementation and testing phase of the software development life cycle. Main activities of the V and V for the PLC system software are a technical evaluation, licensing suitability evaluation, inspection and traceability analysis, formal verification, software safety analysis, and a software configuration management. The proposed V and V methodology satisfies the Standard Review Plan(SRP)/Branch Technical Position(BTP)-14 criteria for the safety software in nuclear power plants. The proposed V and V methodology is going to be used to verify the upcoming software life cycle in the KNICS projects

  16. artdaq: DAQ software development made simple

    Biery, Kurt; Flumerfelt, Eric; Freeman, John; Ketchum, Wesley; Lukhanin, Gennadiy; Rechenmacher, Ron

    2017-10-01

    For a few years now, the artdaq data acquisition software toolkit has provided numerous experiments with ready-to-use components which allow for rapid development and deployment of DAQ systems. Developed within the Fermilab Scientific Computing Division, artdaq provides data transfer, event building, run control, and event analysis functionality. This latter feature includes built-in support for the art event analysis framework, allowing experiments to run art modules for real-time filtering, compression, disk writing and online monitoring. As art, also developed at Fermilab, is also used for offline analysis, a major advantage of artdaq is that it allows developers to easily switch between developing online and offline software. artdaq continues to be improved. Support for an alternate mode of running whereby data from some subdetector components are only streamed if requested has been added; this option will reduce unnecessary DAQ throughput. Real-time reporting of DAQ metrics has been implemented, along with the flexibility to choose the format through which experiments receive the reports; these formats include the Ganglia, Graphite and syslog software packages, along with flat ASCII files. Additionally, work has been performed investigating more flexible modes of online monitoring, including the capability to run multiple online monitoring processes on different hosts, each running its own set of art modules. Finally, a web-based GUI interface through which users can configure details of their DAQ system has been implemented, increasing the ease of use of the system. Already successfully deployed on the LArlAT, DarkSide-50, DUNE 35ton and Mu2e experiments, artdaq will be employed for SBND and is a strong candidate for use on ICARUS and protoDUNE. With each experiment comes new ideas for how artdaq can be made more flexible and powerful. The above improvements will be described, along with potential ideas for the future.

  17. Selection of software for mechanical engineering undergraduates

    Cheah, C. T.; Yin, C. S.; Halim, T.; Naser, J.; Blicblau, A. S.

    2016-01-01

    A major problem with the undergraduate mechanical course is the limited exposure of students to software packages coupled with the long learning curve on the existing software packages. This work proposes the use of appropriate software packages for the entire mechanical engineering curriculum to ensure students get sufficient exposure real life design problems. A variety of software packages are highlighted as being suitable for undergraduate work in mechanical engineering, e.g. simultaneous non-linear equations; uncertainty analysis; 3-D modeling software with the FEA; analysis tools for the solution of problems in thermodynamics, fluid mechanics, mechanical system design, and solid mechanics.

  18. Selection of software for mechanical engineering undergraduates

    Cheah, C. T.; Yin, C. S.; Halim, T.; Naser, J.; Blicblau, A. S., E-mail: ablicblau@swin.edu.au [Swinburne University of Technology, Faculty of Science Engineering and Technology, PO Box 218 Hawthorn, Victoria, Australia, 3122 (Australia)

    2016-07-12

    A major problem with the undergraduate mechanical course is the limited exposure of students to software packages coupled with the long learning curve on the existing software packages. This work proposes the use of appropriate software packages for the entire mechanical engineering curriculum to ensure students get sufficient exposure real life design problems. A variety of software packages are highlighted as being suitable for undergraduate work in mechanical engineering, e.g. simultaneous non-linear equations; uncertainty analysis; 3-D modeling software with the FEA; analysis tools for the solution of problems in thermodynamics, fluid mechanics, mechanical system design, and solid mechanics.

  19. EDS operator and control software

    Ott, L.L.

    1985-04-01

    The Enrichment Diagnostic System (EDS) was developed at Lawrence Livermore National Laboratory (LLNL) to acquire, display and analyze large quantities of transient data for a real-time Advanced Vapor Laser Isotope Separation (AVLIS) experiment. Major topics discussed in this paper are the EDS operator interface (SHELL) program, the data acquisition and analysis scheduling software, and the graphics software. The workstation concept used in EDS, the software used to configure a user's workstation, and the ownership and management of a diagnostic are described. An EDS diagnostic is a combination of hardware and software designed to study specific aspects of the process. Overall system performance is discussed from the standpoint of scheduling techniques, evaluation tools, optimization techniques, and program-to-program communication methods. EDS is based on a data driven design which keeps the need to modify software to a minimum. This design requires a fast and reliable data base management system. A third party data base management product, Berkeley Software System Database, written explicitly for HP1000's, is used for all EDS data bases. All graphics is done with an in-house graphics product, Device Independent Graphics Library (DIGLIB). Examples of devices supported by DIGLIB are: Versatec printer/plotters, Raster Technologies Graphic Display Controllers, and HP terminals (HP264x and HP262x). The benefits derived by using HP hardware and software as well as obstacles imposed by the HP environment are presented in relation to EDS development and implementation

  20. Software for the LHCb experiment

    Corti, Gloria; Belyaev, Ivan; Cattaneo, Marco; Charpentier, Philippe; Frank, Markus; Koppenburg, Patrick; Mato-Vila, P; Ranjard, Florence; Roiser, Stefan

    2006-01-01

    LHCb is an experiment for precision measurements of CP-violation and rare decays in B mesons at the LHC collider at CERN. The LHCb software development strategy follows an architecture-centric approach as a way of creating a resilient software framework that can withstand changes in requirements and technology over the expected long lifetime of the experiment. The software architecture, called GAUDI, supports event data processing applications that run in different processing environments ranging from the real-time high- level triggers in the online system to the final physics analysis performed by more than one hundred physicists. The major architectural design choices and the arguments that lead to these choices will be outlined. Object oriented technologies have been used throughout. Initially developed for the LHCb experiment, GAUDI has been adopted and extended by other experiments. Several iterations of the GAUDI software framework have been released and are now being used routinely by the physicists of...

  1. The Use of Utility Accounting Software at Miami University.

    Wenner, Paul

    1999-01-01

    Describes how Miami University successfully developed an accounting software package that tracked and recorded their utility usage, including examples of its graphics and reporting components. Background information examining the decision to pursue an energy management software package is included. (GR)

  2. Software reliability prediction using SPN | Abbasabadee | Journal of ...

    Software reliability prediction using SPN. ... In this research for computation of software reliability, component reliability model based on SPN would be proposed. An isomorphic markov ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  3. The Inner Detector software moves to Geant4

    Elsing, M

    2004-01-01

    2004 is a year of change and of several major milestones for the Inner Detector software. The first of these milestones was met in March when a set of test events was successfully processed through Geant4 and afterwards through the full Inner Detector offline software chain. In the picture, a reconstructed single muon event from this test sample is displayed in different projections. Even though this looks almost trivial, it required the successful integration of several new software components besides Geant4 into the Inner Detector code. A new ATLAS wide Detector Description software package called GeoModel has been fully deployed in the Inner Detector as the single source of geometry information for both the simulation and the reconstruction. New code to emulate the digitization for all detectors and a new data model have been put in place to cope with the new simulation input. And finally the two major offline reconstruction packages, namely xKalman and iPatRec, were migrated to use the new Inner Detector ...

  4. NASA Software Engineering Benchmarking Study

    Rarick, Heather L.; Godfrey, Sara H.; Kelly, John C.; Crumbley, Robert T.; Wifl, Joel M.

    2013-01-01

    To identify best practices for the improvement of software engineering on projects, NASA's Offices of Chief Engineer (OCE) and Safety and Mission Assurance (OSMA) formed a team led by Heather Rarick and Sally Godfrey to conduct this benchmarking study. The primary goals of the study are to identify best practices that: Improve the management and technical development of software intensive systems; Have a track record of successful deployment by aerospace industries, universities [including research and development (R&D) laboratories], and defense services, as well as NASA's own component Centers; and Identify candidate solutions for NASA's software issues. Beginning in the late fall of 2010, focus topics were chosen and interview questions were developed, based on the NASA top software challenges. Between February 2011 and November 2011, the Benchmark Team interviewed a total of 18 organizations, consisting of five NASA Centers, five industry organizations, four defense services organizations, and four university or university R and D laboratory organizations. A software assurance representative also participated in each of the interviews to focus on assurance and software safety best practices. Interviewees provided a wealth of information on each topic area that included: software policy, software acquisition, software assurance, testing, training, maintaining rigor in small projects, metrics, and use of the Capability Maturity Model Integration (CMMI) framework, as well as a number of special topics that came up in the discussions. NASA's software engineering practices compared favorably with the external organizations in most benchmark areas, but in every topic, there were ways in which NASA could improve its practices. Compared to defense services organizations and some of the industry organizations, one of NASA's notable weaknesses involved communication with contractors regarding its policies and requirements for acquired software. One of NASA's strengths

  5. Reliability of software

    Kopetz, H.

    1980-01-01

    Common factors and differences in the reliability of hardware and software; reliability increase by means of methods of software redundancy. Maintenance of software for long term operating behavior. (HP) [de

  6. Process model for building quality software on internet time ...

    The competitive nature of the software construction market and the inherently exhilarating nature of software itself have hinged the success of any software development project on four major pillars: time to market, product quality, innovation and documentation. Unfortunately, however, existing software development models ...

  7. A Methodology for Integrating Maintainability Using Software Metrics

    Lewis, John A.; Henry, Sallie M.

    1989-01-01

    Maintainability must be integrated into software early in the development process. But for practical use, the techniques used must be as unobtrusive to the existing software development process as possible. This paper defines a methodology for integrating maintainability into large-scale software and describes an experiment which implemented the methodology into a major commercial software development environment.

  8. Space Flight Software Development Software for Intelligent System Health Management

    Trevino, Luis C.; Crumbley, Tim

    2004-01-01

    The slide presentation examines the Marshall Space Flight Center Flight Software Branch, including software development projects, mission critical space flight software development, software technical insight, advanced software development technologies, and continuous improvement in the software development processes and methods.

  9. Why Free Software Matters for Literacy Educators.

    Brunelle, Michael D.; Bruce, Bertram C.

    2002-01-01

    Notes that understanding what "free software" means and its implications for access and use of new technologies is an important component of the new literacies. Concludes that if free speech and free press are essential to the development of a general literacy, then free software can promote the development of computer literacy. (SG)

  10. Software Engineering Guidebook

    Connell, John; Wenneson, Greg

    1993-01-01

    The Software Engineering Guidebook describes SEPG (Software Engineering Process Group) supported processes and techniques for engineering quality software in NASA environments. Three process models are supported: structured, object-oriented, and evolutionary rapid-prototyping. The guidebook covers software life-cycles, engineering, assurance, and configuration management. The guidebook is written for managers and engineers who manage, develop, enhance, and/or maintain software under the Computer Software Services Contract.

  11. Effective Results Analysis for the Similar Software Products’ Orthogonality

    Ion Ivan; Daniel Milodin

    2009-01-01

    It is defined the concept of similar software. There are established conditions of archiving the software components. It is carried out the orthogonality evaluation and the correlation between the orthogonality and the complexity of the homogenous software components is analyzed. Shall proceed to build groups of similar software products, belonging to the orthogonality intervals. There are presented in graphical form the results of the analysis. There are detailed aspects of the functioning o...

  12. A 'Toolbox' Equivalent Process for Safety Analysis Software

    O'Kula, K.R.; Eng, Tony

    2004-01-01

    Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 2002-1 (Quality Assurance for Safety-Related Software) identified a number of quality assurance issues on the use of software in Department of Energy (DOE) facilities for analyzing hazards, and designing and operating controls that prevent or mitigate potential accidents. The development and maintenance of a collection, or 'toolbox', of multiple-site use, standard solution, Software Quality Assurance (SQA)-compliant safety software is one of the major improvements identified in the associated DOE Implementation Plan (IP). The DOE safety analysis toolbox will contain a set of appropriately quality-assured, configuration-controlled, safety analysis codes, recognized for DOE-broad, safety basis applications. Currently, six widely applied safety analysis computer codes have been designated for toolbox consideration. While the toolbox concept considerably reduces SQA burdens among DOE users of these codes, many users of unique, single-purpose, or single-site software may still have sufficient technical justification to continue use of their computer code of choice, but are thwarted by the multiple-site condition on toolbox candidate software. The process discussed here provides a roadmap for an equivalency argument, i.e., establishing satisfactory SQA credentials for single-site software that can be deemed ''toolbox-equivalent''. The process is based on the model established to meet IP Commitment 4.2.1.2: Establish SQA criteria for the safety analysis ''toolbox'' codes. Implementing criteria that establish the set of prescriptive SQA requirements are based on implementation plan/procedures from the Savannah River Site, also incorporating aspects of those from the Waste Isolation Pilot Plant (SNL component) and the Yucca Mountain Project. The major requirements are met with evidence of a software quality assurance plan, software requirements and design documentation, user's instructions, test report, a

  13. Teaching Software Componentization: A Bar Chart Java Bean

    Mitri, Michel

    2010-01-01

    In the current object-oriented paradigm, software construction increasingly involves creating and utilizing "software components". These components can serve a variety of functions, from common algorithmic processes to database connectivity to graphical interfaces. The advantage of component architectures is that programmers can use pre-existing…

  14. Robotic Software Integration Using MARIE

    Carle Côté

    2006-03-01

    Full Text Available This paper presents MARIE, a middleware framework oriented towards developing and integrating new and existing software for robotic systems. By using a generic communication framework, MARIE aims to create a flexible distributed component system that allows robotics developers to share software programs and algorithms, and design prototypes rapidly based on their own integration needs. The use of MARIE is illustrated with the design of a socially interactive autonomous mobile robot platform capable of map building, localization, navigation, tasks scheduling, sound source localization, tracking and separation, speech recognition and generation, visual tracking, message reading and graphical interaction using a touch screen interface.

  15. Other components

    Anon.

    1993-01-01

    This chapter includes descriptions of electronic and mechanical components which do not merit a chapter to themselves. Other hardware requires mention because of particularly high tolerance or intolerance of exposure to radiation. A more systematic analysis of radiation responses of structures which are definable by material was given in section 3.8. The components discussed here are field effect transistors, transducers, temperature sensors, magnetic components, superconductors, mechanical sensors, and miscellaneous electronic components

  16. The artifacts of component-based development

    Rizwan, M.; Qureshi, J.; Hayat, S.A.

    2007-01-01

    Component based development idea was floated in a conference name Mass Produced Software Components in 1968 (1). Since then engineering and scientific libraries are developed to reuse the previously developed functions. This concept is now widely used in SW development as component based development (CBD). Component-based software engineering (CBSE) is used to develop/ assemble software from existing components (2). Software developed using components is called component where (3). This paper presents different architectures of CBD such as Active X, common object request broker architecture (CORBA), remote method invocation (RMI) and simple object access protocol (SOAP). The overall objective of this paper is to support the practice of CBD by comparing its advantages and disadvantages. This paper also evaluates object oriented process model to adapt it for CBD. (author)

  17. Quantitative Assessment of the Influence of Rhizoma Zingiberis on the Level of Aconitine in Rat Gut Sacs and Qualitative Analysis of the Major Influencing Components of Rhizoma Zingiberis on Aconitine Using UPLC/MS.

    Yang Xin

    Full Text Available This study attempted to clarify the material basis for the detoxification of Rhizoma Zingiberis (RZ on aconitine, an analgesic drug, by quantitatively assessing the influence of RZ on the in vitro intestinal concentration of aconitine using an everted gut sac model and by qualitatively identifying the components in the RZ extract. To quantify aconitine in rat everted gut sacs, both an accurate processing method and a sensitive detection method were required. We developed a three-step sample processing method to protect the components from decomposition and applied ultra-performance liquid chromatography coupled with triple quadrupole mass spectrometry (UPLC/TQMS to quantify aconitine, glucose and digoxin. In addition, ultra-performance liquid chromatography coupled with linear ion trap mass spectrometry (UPLC/ITMS was applied to detect the potential antidotal components in the RZ extract. Finally, the RZ extract reduced the level of aconitine in everted gut sacs, and eleven gingerols were successfully identified, which could be considered potential antidotal components for aconitine. This study demonstrated the application of two UPLC/MS methods for analyzing the material basis for the reciprocity between Chinese medicine components in everted gut sacs.

  18. Ensuring Software IP Cleanliness

    Mahshad Koohgoli

    2007-12-01

    Full Text Available At many points in the life of a software enterprise, determination of intellectual property (IP cleanliness becomes critical. The value of an enterprise that develops and sells software may depend on how clean the software is from the IP perspective. This article examines various methods of ensuring software IP cleanliness and discusses some of the benefits and shortcomings of current solutions.

  19. Commercial Literacy Software.

    Balajthy, Ernest

    1997-01-01

    Presents the first year's results of a continuing project to monitor the availability of software of relevance for literacy education purposes. Concludes there is an enormous amount of software available for use by teachers of reading and literacy--whereas drill-and-practice software is the largest category of software available, large numbers of…

  20. Ensuring Software IP Cleanliness

    Mahshad Koohgoli; Richard Mayer

    2007-01-01

    At many points in the life of a software enterprise, determination of intellectual property (IP) cleanliness becomes critical. The value of an enterprise that develops and sells software may depend on how clean the software is from the IP perspective. This article examines various methods of ensuring software IP cleanliness and discusses some of the benefits and shortcomings of current solutions.

  1. Statistical Software Engineering

    1998-04-13

    multiversion software subject to coincident errors. IEEE Trans. Software Eng. SE-11:1511-1517. Eckhardt, D.E., A.K Caglayan, J.C. Knight, L.D. Lee, D.F...J.C. and N.G. Leveson. 1986. Experimental evaluation of the assumption of independence in multiversion software. IEEE Trans. Software

  2. Agile Software Development

    Biju, Soly Mathew

    2008-01-01

    Many software development firms are now adopting the agile software development method. This method involves the customer at every level of software development, thus reducing the impact of change in the requirement at a later stage. In this article, the principles of the agile method for software development are explored and there is a focus on…

  3. Improving Software Developer's Competence

    Abrahamsson, Pekka; Kautz, Karlheinz; Sieppi, Heikki

    2002-01-01

    Emerging agile software development methods are people oriented development approaches to be used by the software industry. The personal software process (PSP) is an accepted method for improving the capabilities of a single software engineer. Five original hypotheses regarding the impact...

  4. Software - Naval Oceanography Portal

    are here: Home › USNO › Earth Orientation › Software USNO Logo USNO Navigation Earth Orientation Products GPS-based Products VLBI-based Products EO Information Center Publications about Products Software Search databases Auxiliary Software Supporting Software Form Folder Earth Orientation Matrix Calculator

  5. Software Engineering Education Directory

    1990-04-01

    and Engineering (CMSC 735) Codes: GPEV2 * Textiooks: IEEE Tutoria on Models and Metrics for Software Management and Engameeing by Basi, Victor R...Software Engineering (Comp 227) Codes: GPRY5 Textbooks: IEEE Tutoria on Software Design Techniques by Freeman, Peter and Wasserman, Anthony 1. Software

  6. Model-driven software migration a methodology

    Wagner, Christian

    2014-01-01

    Today, reliable software systems are the basis of any business or company. The continuous further development of those systems is the central component in software evolution. It requires a huge amount of time- man power- as well as financial resources. The challenges are size, seniority and heterogeneity of those software systems. Christian Wagner addresses software evolution: the inherent problems and uncertainties in the process. He presents a model-driven method which leads to a synchronization between source code and design. As a result the model layer will be the central part in further e

  7. Development of a fatigue analysis software system

    Choi, B. I.; Lee, H. J.; Han, S. W.; Kim, J. Y.; Hwang, K. H.; Kang, J. Y.

    2001-01-01

    A general purpose fatigue analysis software to predict fatigue lives of mechanical components and structures was developed. This software has some characteristic features including functions of searching weak regions on the free surface in order to reduce computing time significantly, a database of fatigue properties for various materials, and an expert system which can assist any users to get more proper results. This software can be used in the environment consists of commercial finite element packages. Using the software developed fatigue analyses for a SAE keyhole specimen and an automobile knuckle were carried out. It was observed that the results were agree well with those from commercial packages

  8. A development methodology for scientific software

    Cort, G.; Barrus, D.M.; Goldstone, J.A.; Miller, L.; Nelson, R.O.; Poore, R.V.

    1985-01-01

    We present the details of a software development methodology that addresses all phases of the software life cycle, yet is well suited for application by small projects with limited resources. The methodology has been developed at the Los Alamos Weapons Neutron Research (WNR) Facility and was utilized during the recent development of the WNR Data Acquisition Command Language. The methodology emphasizes the development and maintenance of comprehensive documentation for all software components. The impact of the methodology upon software quality and programmer productivity is assessed

  9. Workflow-Based Software Development Environment

    Izygon, Michel E.

    2013-01-01

    The Software Developer's Assistant (SDA) helps software teams more efficiently and accurately conduct or execute software processes associated with NASA mission-critical software. SDA is a process enactment platform that guides software teams through project-specific standards, processes, and procedures. Software projects are decomposed into all of their required process steps or tasks, and each task is assigned to project personnel. SDA orchestrates the performance of work required to complete all process tasks in the correct sequence. The software then notifies team members when they may begin work on their assigned tasks and provides the tools, instructions, reference materials, and supportive artifacts that allow users to compliantly perform the work. A combination of technology components captures and enacts any software process use to support the software lifecycle. It creates an adaptive workflow environment that can be modified as needed. SDA achieves software process automation through a Business Process Management (BPM) approach to managing the software lifecycle for mission-critical projects. It contains five main parts: TieFlow (workflow engine), Business Rules (rules to alter process flow), Common Repository (storage for project artifacts, versions, history, schedules, etc.), SOA (interface to allow internal, GFE, or COTS tools integration), and the Web Portal Interface (collaborative web environment

  10. Great software debates

    Davis, A

    2004-01-01

    The industry’s most outspoken and insightful critic explains how the software industry REALLY works. In Great Software Debates, Al Davis, shares what he has learned about the difference between the theory and the realities of business and encourages you to question and think about software engineering in ways that will help you succeed where others fail. In short, provocative essays, Davis fearlessly reveals the truth about process improvement, productivity, software quality, metrics, agile development, requirements documentation, modeling, software marketing and sales, empiricism, start-up financing, software research, requirements triage, software estimation, and entrepreneurship.

  11. The MINERVA Software Development Process

    Narkawicz, Anthony; Munoz, Cesar A.; Dutle, Aaron M.

    2017-01-01

    This paper presents a software development process for safety-critical software components of cyber-physical systems. The process is called MINERVA, which stands for Mirrored Implementation Numerically Evaluated against Rigorously Verified Algorithms. The process relies on formal methods for rigorously validating code against its requirements. The software development process uses: (1) a formal specification language for describing the algorithms and their functional requirements, (2) an interactive theorem prover for formally verifying the correctness of the algorithms, (3) test cases that stress the code, and (4) numerical evaluation on these test cases of both the algorithm specifications and their implementations in code. The MINERVA process is illustrated in this paper with an application to geo-containment algorithms for unmanned aircraft systems. These algorithms ensure that the position of an aircraft never leaves a predetermined polygon region and provide recovery maneuvers when the region is inadvertently exited.

  12. Fostering successful scientific software communities

    Bangerth, W.; Heister, T.; Hwang, L.; Kellogg, L. H.

    2016-12-01

    Developing sustainable open source software packages for the sciences appears at first to be primarily a technical challenge: How can one create stable and robust algorithms, appropriate software designs, sufficient documentation, quality assurance strategies such as continuous integration and test suites, or backward compatibility approaches that yield high-quality software usable not only by the authors, but also the broader community of scientists? However, our experience from almost two decades of leading the development of the deal.II software library (http://www.dealii.org, a widely-used finite element package) and the ASPECT code (http://aspect.dealii.org, used to simulate convection in the Earth's mantle) has taught us that technical aspects are not the most difficult ones in scientific open source software. Rather, it is the social challenge of building and maintaining a community of users and developers interested in answering questions on user forums, contributing code, and jointly finding solutions to common technical and non-technical challenges. These problems are posed in an environment where project leaders typically have no resources to reward the majority of contributors, where very few people are specifically paid for the work they do on the project, and with frequent turnover of contributors as project members rotate into and out of jobs. In particular, much software work is done by graduate students who may become fluent enough in a software only a year or two before they leave academia. We will discuss strategies we have found do and do not work in maintaining and growing communities around the scientific software projects we lead. Specifically, we will discuss the management style necessary to keep contributors engaged, ways to give credit where credit is due, and structuring documentation to decrease reliance on forums and thereby allow user communities to grow without straining those who answer questions.

  13. Implementing Software Safety in the NASA Environment

    Wetherholt, Martha S.; Radley, Charles F.

    1994-01-01

    Until recently, NASA did not consider allowing computers total control of flight systems. Human operators, via hardware, have constituted the ultimate safety control. In an attempt to reduce costs, NASA has come to rely more and more heavily on computers and software to control space missions. (For example. software is now planned to control most of the operational functions of the International Space Station.) Thus the need for systematic software safety programs has become crucial for mission success. Concurrent engineering principles dictate that safety should be designed into software up front, not tested into the software after the fact. 'Cost of Quality' studies have statistics and metrics to prove the value of building quality and safety into the development cycle. Unfortunately, most software engineers are not familiar with designing for safety, and most safety engineers are not software experts. Software written to specifications which have not been safety analyzed is a major source of computer related accidents. Safer software is achieved step by step throughout the system and software life cycle. It is a process that includes requirements definition, hazard analyses, formal software inspections, safety analyses, testing, and maintenance. The greatest emphasis is placed on clearly and completely defining system and software requirements, including safety and reliability requirements. Unfortunately, development and review of requirements are the weakest link in the process. While some of the more academic methods, e.g. mathematical models, may help bring about safer software, this paper proposes the use of currently approved software methodologies, and sound software and assurance practices to show how, to a large degree, safety can be designed into software from the start. NASA's approach today is to first conduct a preliminary system hazard analysis (PHA) during the concept and planning phase of a project. This determines the overall hazard potential of

  14. Imperfect Information in Software Design Processes

    Noppen, J.A.R.

    2007-01-01

    The process of designing high-quality software systems is one of the major issues in software engineering research. Over the years, this has resulted in numerous design methods, each with specific qualities and drawbacks. For example, the Rational Unified Process is a comprehensive design process,

  15. Middlesex Community College Software Technical Writing Program.

    Middlesex Community Coll., Bedford, MA.

    This document describes the Software Technical Writing Program at Middlesex Community College (Massachusetts). The program is a "hands-on" course designed to develop job-related skills in three major areas: technical writing, software, and professional skills. The program was originally designed in cooperation with the Massachusetts High…

  16. Views on Software Testability

    Shimeall, Timothy; Friedman, Michael; Chilenski, John; Voas, Jeffrey

    1994-01-01

    The field of testability is an active, well-established part of engineering of modern computer systems. However, only recently have technologies for software testability began to be developed. These technologies focus on accessing the aspects of software that improve or depreciate the ease of testing. As both the size of implemented software and the amount of effort required to test that software increase, so will the important of software testability technologies in influencing the softwa...

  17. Agile software assessment

    Nierstrasz Oscar; Lungu Mircea

    2012-01-01

    Informed decision making is a critical activity in software development but it is poorly supported by common development environments which focus mainly on low level programming tasks. We posit the need for agile software assessment which aims to support decision making by enabling rapid and effective construction of software models and custom analyses. Agile software assessment entails gathering and exploiting the broader context of software information related to the system at hand as well ...

  18. Tests of Event Filter Configuration Software

    Wickens, F.J.

    TDAQ - Tests of Event Filter configuration software Within Trigger/DAQ a major consideration is how well the performance of the system components scale in going from the small set-ups used for development work to the final system with many hundreds of processors and links. In the case of the Event Filter, which makes the final stage of on-line event selection, plus on-line calibrations and monitoring, more than a thousand processors are envisaged. These processors will be divided into sub-farms, most will be remote from the detector and some could even be at institutes far from CERN. As part of the on-line system it is important that the software in the sub-farms can be reconfigured rapidly as runs start and stop, and that the system be fault tolerant. The flow of data inside a sub-farm involves many processes, for distribution and collection of results in addition to those for event processing itself. Supervision code written in Java has been developed to manage the processes within a cluster, with XML f...

  19. WISDAAM software programmer's manual

    Ball, J.R.

    1992-10-01

    The WISDAAM system was developed to provide quality control over test data associated with in situ testing at the Waste Isolation Pilot Plant (WIPP). Assurance of data quality is of critical importance as these tests supply the information which will be used for development and verification of the technology required for repository implementation. The amount of data collected from the tests, which are some of the largest ever fielded in an underground facility, prompted the undertaking of a major project task to address data processing. The goal was to create a conceptual umbrella under which all of the activities associated with processing WIPP data (i.e., data reduction, archiving, retrieval, etc.) could be grouped. The WISDAAM system was the product of this task. The overall system covers electronic as well as manual data processing; however, this document deals primarily with those operations implemented by software running on a VAX computer

  20. Development of Hardware and Software for Automated Ultrasonic Testing

    Choi, Sung Nam; Lee, Hee Jong; Yang, Seung Ok

    2012-01-01

    Nondestructive testing (NDT) for the construction and operating of NPPs plays an important role in confirming the integrity of the NPPs. Especially, Automated ultrasonic testing (AUT) is one of the primary nondestructive examination methods for in-service inspection of the welding parts in major components in NPPs. AUT is a reliable nondestructive testing because the data of AUT are saved and reviewed with other examiners. Korea Hydro and Nuclear Power-Central Research Institute (KHNP-CRI) has developed an automated ultrasonic testing (AUT) system based on a high speed pulser-receiver. In combination with the designed software and hardware architecture, this new system permits user configurations for a wide range of user-specific applications through fully automated inspections using compact portable systems with up to eight channels. This paper gives an overview of hardware (H/W) and software (S/W) for the AUT system to inspect welds in NPPs