WorldWideScience

Sample records for major element composition

  1. Major element composition of Luna 20 glasses.

    Science.gov (United States)

    Warner, J.; Reid, A. M.; Ridley, W. I.; Brown, R. W.

    1972-01-01

    Ten per cent of the 50 to 150-micron size fraction of Luna 20 soil is glass. A random suite of 270 of these glasses has been analyzed by electron microprobe techniques. The major glass type forms a strong cluster around a mean value corresponding to Highland basalt (anorthositic gabbro) with 70% normative feldspar. Minor glass groups have the compositions of mare basalts and of low-K Fra Mauro type basalts. The glass data indicate that Highland basalt is the major rock type in the highlands north of Mare Fecunditatis.

  2. Major element compositions of Luna 20 glass particles.

    Science.gov (United States)

    Glass, B. P.

    1973-01-01

    Major element analyses of nineteen Luna 20 glass particles indicate that most of the Luna 20 glasses have Al2O3 contents greater than 21 wt % and compositions similar to Apollo 16 and Luna 20 rocks and soils. Three of the glass particles have low Al2O3 (less than 13 wt %) and high FeO (greater than 18 wt %) contents and were probably derived from one of the adjacent maria. The low glass content of the Luna 20 soil indicates that it is relatively young or less mature than most mare soils that have been studied.

  3. Major element composition of glasses in three Apollo 15 soils.

    Science.gov (United States)

    Reid, A. M.; Warner, J.; Ridley, W. I.; Brown, R. W.

    1972-01-01

    Approximately 180 glasses in each of three Apollo 15 soils have been analyzed for nine elements. Cluster analysis techniques allow the recognition of preferred glass compositions that are equated with parent rock compositions. Green glass rich in Fe and Mg, poor in Al and Ti may be derived from deep-seated pyroxenitic material now present at the Apennine Front. Fra Mauro basalt (KREEP) is most abundant in the LM soil and is tentatively identified as ray material from the Aristillus-Autolycus area. Highland basalt (anorthositic gabbro), believed to be derived from the lunar highlands, has the same composition as at other landing sites, but is less abundant. The Apennine Front is probably not true highland material but may contain a substantial amount of material with the composition of Fra Mauro basalt, but lacking the high-K content.

  4. Major element chemical compositions of chondrules in unequilibrated chondrites

    Science.gov (United States)

    Ikeda, Y.

    1984-01-01

    The chemical compositions (except for metals and sulfides in chondrules) of more than 500 chondrules from unequilibrated E, H, L, LL, and C chondrites were measured using a broad beam of an electron-probe microanalyzer. The compositions of chondrules can be represented by various mixtures of normative compositions of olivine, low-Ca pyroxene, plagioclase, and high-Ca pyroxene with minor amounts of spinel, feldspathoid, SiO2-minerals, etc., indicating that the chondrule precursor materials consisted of aggregates of these minerals. The Al, Na, and K contents of most chondrules reflect the compositions of the ternary feldspar (An-Ab-Kf) of the chondrule precursor materials, and chemical types of chondrules (KF, SP, IP, and CP) are defined on the basis of the atomic proportion of Al, Na, and K.

  5. The Nakhla parent melt: REE partition coefficients and clues to major element composition

    Science.gov (United States)

    Mckay, G.; Le, L.; Wagstaff, J.

    1993-01-01

    Nakhla is one of the SNC meteorites, generally believed to be of Martian origin. It is a medium-grained augite-olivine cumulate with a variolitic groundmass of sodic plagioclase, alkali feldspar, and Fe-rich pyroxenes and olivine. One of the major tasks in deciphering Nakhla's petrogenesis is determining the composition of its parent melt. Gaining an understanding of the composition and petrogenesis of this parent melt may help unravel Nakhla's relationship to the other SNCs, and provide clues to Martian petrogenesis in general. Our experimental partitioning studies provide new information that helps constrain both the major and trace element composition of the Nakhla parent melt.

  6. EH3 matrix mineralogy with major and trace element composition compared to chondrules

    Science.gov (United States)

    Lehner, S. W.; McDonough, W. F.; NéMeth, P.

    2014-12-01

    We investigated the matrix mineralogy in primitive EH3 chondrites Sahara 97072, ALH 84170, and LAR 06252 with transmission electron microscopy; measured the trace and major element compositions of Sahara 97072 matrix and ferromagnesian chondrules with laser-ablation, inductively coupled, plasma mass spectrometry (LA-ICPMS); and analyzed the bulk composition of Sahara 97072 with LA-ICPMS, solution ICPMS, and inductively coupled plasma atomic emission spectroscopy. The fine-grained matrix of EH3 chondrites is unlike that in other chondrite groups, consisting primarily of enstatite, cristobalite, troilite, and kamacite with a notable absence of olivine. Matrix and pyroxene-rich chondrule compositions differ from one another and are distinct from the bulk meteorite. Refractory lithophile elements are enriched by a factor of 1.5-3 in chondrules relative to matrix, whereas the matrix is enriched in moderately volatile elements. The compositional relation between the chondrules and matrix is reminiscent of the difference between EH3 pyroxene-rich chondrules and EH3 Si-rich, highly sulfidized chondrules. Similar refractory element ratios between the matrix and the pyroxene-rich chondrules suggest the fine-grained material primarily consists of the shattered, sulfidized remains of the formerly pyroxene-rich chondrules with the minor addition of metal clasts. The matrix, chondrule, and metal-sulfide nodule compositions are probably complementary, suggesting all the components of the EH3 chondrites came from the same nebular reservoir.

  7. Apollo 16 impact-melt splashes - Petrography and major-element composition

    Science.gov (United States)

    See, Thomas H.; Horz, Friedrich; Morris, Richard V.

    1986-11-01

    Petrographic and major-element analyses are applied to 50 Apollo 16 impact-melt splash (IMS) samples in order to determine their origin and assess the nature of the subregolith source. The macroscopic analyses reveal that the IMSs exhibit a glassy appearance, but the textures range from holohyaline to hyalopilitic. Schlieren-rich glasses dominate the holohyaline areas, and the crystalline areas are mainly spherulitic. It is observed that most IMSs contain feldspathic monomineralic and lithic clasts and no regolithic materials. It is detected that the chemistry of most IMSs is not like the local regolith and appears to represent varied mixtures of VHA impact-melt breccias and anorthosite; the host rocks are mainly dimict breccias. It is concluded that the Cayley Formation is a polymict deposit composed of VHA impact-melt breccias and anorthosites. Tables revealing the macroscopic characteristics of the IMSs and the major-element composition of IMSs and various host rock are presented.

  8. Olivine Major and Trace Element Compositions in Southern Payenia Basalts, Argentina

    DEFF Research Database (Denmark)

    Søager, Nina; Portnyagin, Maxim; Hoernle, Kaj;

    2015-01-01

    Olivine major and trace element compositions from 12 basalts from the southern Payenia volcanic province in Argentina have been analyzed by electron microprobe and laser ablation inductively coupled plasma mass spectrometry. The olivines have high Fe/Mn and low Ca/Fe and many fall at the end...... by subduction-zone fluids and/or melts. The increasing contributions from the pyroxene-rich source in the southern Payenia basalts are correlated with an increasing Fe-enrichment, which caused the olivines to have lower forsterite contents at a given Ni content. Al-in-olivine crystallization temperatures...

  9. Antidepressant, psychostimulant, and nootropic effects of major and trace element composition.

    Science.gov (United States)

    Afanasieva, O G; Suslov, N I; Shilova, I V

    2013-06-01

    The antidepressant, psychostimulant, and nootropic effects of a composition of major and trace elements including KCl, RbNO3, magnesium sulfate, and zinc sulfate were studied on the models of behavioural despair (Porsolt test) and conditioned passive avoidance test. The preparation was found to shorten the immobilization time in the Porsolt test and promote retention of the conditioned passive avoidance. The most pronounced psychostimulant effect of the substance was observed at a dose of 4.68 mg/kg and the most pronounced antidepressant effect was found at a dose of 18.72 mg/kg. Maximum nootropic activity of the preparation was found at a dose of 93.6 mg/kg.

  10. The major-element composition of Mercury's surface from MESSENGER X-ray spectrometry.

    Science.gov (United States)

    Nittler, Larry R; Starr, Richard D; Weider, Shoshana Z; McCoy, Timothy J; Boynton, William V; Ebel, Denton S; Ernst, Carolyn M; Evans, Larry G; Goldsten, John O; Hamara, David K; Lawrence, David J; McNutt, Ralph L; Schlemm, Charles E; Solomon, Sean C; Sprague, Ann L

    2011-09-30

    X-ray fluorescence spectra obtained by the MESSENGER spacecraft orbiting Mercury indicate that the planet's surface differs in composition from those of other terrestrial planets. Relatively high Mg/Si and low Al/Si and Ca/Si ratios rule out a lunarlike feldspar-rich crust. The sulfur abundance is at least 10 times higher than that of the silicate portion of Earth or the Moon, and this observation, together with a low surface Fe abundance, supports the view that Mercury formed from highly reduced precursor materials, perhaps akin to enstatite chondrite meteorites or anhydrous cometary dust particles. Low Fe and Ti abundances do not support the proposal that opaque oxides of these elements contribute substantially to Mercury's low and variable surface reflectance.

  11. Gas composition of major volatile elements in protoplanetary discs and its implication for planet formation

    CERN Document Server

    Amaury, Thiabaud; Yann, Alibert; Ingo, Leya; Klaus, Mezger

    2014-01-01

    Direct observations of gaseous exoplanets reveals that their gas envelope is commonly enriched in C/O ratio compared to that of the host star. This has been explained by considering that the gas phase of the disc could be inhomogeneous, exceeding the stellar C/O ratio in regions where these planets formed; but few studies have considered the drift of the gas and the migration of planets. We aim to derive the gas composition in planets to evaluate if the formation of giant planets with an enriched C/O ratio is possible. The study focusses on the effects of different processes on the C/O ratio like the disc evolution, the drift of gas, and the migration of the planet. We used our previous models for computation of the chemical composition together with the planet formation model of Alibert et al. (2013), to which we added the composition and drift of the gas phase of the disc composed of major volatile species, H2 and He. The study focusses on the region where ice lines are present and influence the C/O ratio o...

  12. Solar Ion Processing of Major Element Surface Compositions of Mature Mare Soils: Insights from Combined XPS and Analytical TEM Observations

    Science.gov (United States)

    Christoffersen, R.; Dukes, C.; Keller, L. P.; Baragiola, R.

    2012-01-01

    Solar wind ions are capable of altering the sur-face chemistry of the lunar regolith by a number of mechanisms including preferential sputtering, radiation-enhanced diffusion and sputter erosion of space weathered surfaces containing pre-existing compositional profiles. We have previously reported in-situ ion irradiation experiments supported by X-ray photoelectron spectroscopy (XPS) and analytical TEM that show how solar ions potentially drive Fe and Ti reduction at the monolayer scale as well as the 10-100 nm depth scale in lunar soils [1]. Here we report experimental data on the effect of ion irradiation on the major element surface composition in a mature mare soil.

  13. Major factors influencing the elemental composition of surface estuarine sediments: the case of 15 estuaries in Portugal.

    Science.gov (United States)

    Mil-Homens, M; Vale, C; Raimundo, J; Pereira, P; Brito, P; Caetano, M

    2014-07-15

    Upper sediments (0-5 cm) were sampled in 94 sites of water bodies of the fifteen Portuguese estuaries characterized by distinct settings of climate, topography and lithology, and marked by diverse anthropogenic pressures. Confined areas recognized as highly anthropogenic impacted, as well as areas dominated by erosion or frequently dredged were not sampled. Grain size, organic carbon (Corg), Al and trace elements (As, Cd, Co, Cr, Cu, Hg, Ni, Pb and Zn) were determined. Normalisation of trace element concentrations to Al and Corg, correlations between elements and Principal Component Analysis (PCA) allowed identifying elemental associations and the relevance of grain-size, lithology and anthropogenic inputs on sediment chemical composition. Whereas grain-size is the dominant effect for the majority of the studied estuaries, the southern estuaries Mira, Arade and Guadiana are dominated by specific lithologies of their river basins, and anthropogenic effects are identified in Ave, Leça, Tagus and Sado. This study emphasizes how baseline values of trace elements in sediments may vary within and among estuarine systems. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Major element composition of the lithospheric mantle under the North Atlantic craton

    DEFF Research Database (Denmark)

    Bizzarro, Martin; Stevenson, R.K.

    2003-01-01

    The composition and thermal state of the lithospheric mantle under the North Atlantic craton was investigated using a suite of peridotite xenoliths from the diamond-bearing Sarfartoq kimberlite dike swarm of southwestern Greenland. Elevated olivine and whole-rock Mg# (>0.9) attest to the refracto...

  15. A Comparative Analyses of Granulometry, Mineral Composition and Major and Trace Element Concentrations in Soils Commonly Ingested by Humans

    Directory of Open Access Journals (Sweden)

    Veronica M. Ngole-Jeme

    2015-07-01

    Full Text Available This study compared the granulometric properties, mineralogical composition and concentrations of major and trace element oxides of commonly ingested soils (geophagic soil collected from different countries with a view of understanding how varied they may be in these properties and to understand the possible health implications of ingesting them. Soil samples were collected from three different countries (South Africa, Swaziland and Democratic Republic of Congo (DRC and their granulometric properties, concentrations of major and trace element oxides as well as mineralogical composition determined. Differences were observed in the granulometric properties of geophagic soil from the three different countries with most of them having <20% clay content. The soils also showed varied degrees of weathering with values of Chemical Index of Alteration (CIA and Chemical Index of Weathering (CIW being between 60% and 99.9% respectively. The mineral assemblages of the soils from South Africa and Swaziland were dominated by the primary minerals quartz and feldspar whereas soils from DRC had more of kaolinite, a secondary mineral than primary minerals. Soils from DRC were associated with silt, clay, Al2O3, and CIA unlike most samples from South Africa which were associated with SiO2, sand, K2O, CaO, and MgO. The soils from Swaziland were closely associated with silt, H2O and Fe2O3(t. These associations reflect the mineralogy of the samples. These soils are not likely to serve as nutrient supplements because of the low concentrations of the nutrient elements contained. The coarse texture of the samples may also result in dental destruction during mastication. Sieving of the soils before ingestion to remove coarse particles is recommended to reduce the potential health threat associated with the ingestion of coarse-textured soils.

  16. Weathering of the New Albany Shale, Kentucky, USA: I. Weathering zones defined by mineralogy and major-element composition

    Science.gov (United States)

    Tuttle, M.L.W.; Breit, G.N.

    2009-01-01

    Comprehensive understanding of chemical and mineralogical changes induced by weathering is valuable information when considering the supply of nutrients and toxic elements from rocks. Here minerals that release and fix major elements during progressive weathering of a bed of Devonian New Albany Shale in eastern Kentucky are documented. Samples were collected from unweathered core (parent shale) and across an outcrop excavated into a hillside 40 year prior to sampling. Quantitative X-ray diffraction mineralogical data record progressive shale alteration across the outcrop. Mineral compositional changes reflect subtle alteration processes such as incongruent dissolution and cation exchange. Altered primary minerals include K-feldspars, plagioclase, calcite, pyrite, and chlorite. Secondary minerals include jarosite, gypsum, goethite, amorphous Fe(III) oxides and Fe(II)-Al sulfate salt (efflorescence). The mineralogy in weathered shale defines four weathered intervals on the outcrop-Zones A-C and soil. Alteration of the weakly weathered shale (Zone A) is attributed to the 40-a exposure of the shale. In this zone, pyrite oxidization produces acid that dissolves calcite and attacks chlorite, forming gypsum, jarosite, and minor efflorescent salt. The pre-excavation, active weathering front (Zone B) is where complete pyrite oxidation and alteration of feldspar and organic matter result in increased permeability. Acidic weathering solutions seep through the permeable shale and evaporate on the surface forming abundant efflorescent salt, jarosite and minor goethite. Intensely weathered shale (Zone C) is depleted in feldspars, chlorite, gypsum, jarosite and efflorescent salts, but has retained much of its primary quartz, illite and illite-smectite. Goethite and amorphous FE(III) oxides increase due to hydrolysis of jarosite. Enhanced permeability in this zone is due to a 14% loss of the original mass in parent shale. Denudation rates suggest that characteristics of Zone C

  17. Major-Element Compositional Diversity Observed by ChemCam Along the MSL Traverse: The First Three Years

    Science.gov (United States)

    Wiens, R. C.; Mangold, N.; Maurice, S.; Blaney, D. L.; Clegg, S. M.; Gasda, P. J.; Frydenvang, J.; Gasnault, O.; Forni, O.; Cousin, A.; Lasue, J.; Lanza, N.; Anderson, R. B.; Sautter, V.; Bridges, J.; Le Deit, L.; Nachon, M.; Rapin, W.; Meslin, P. Y.; Newsom, H. E.; Clark, B. C.; Vaniman, D. T.; Bridges, N.; Herkenhoff, K. E.; Ehlmann, B. L.; Dyar, M. D.; Fisk, M. R.; Francis, R.; Leveille, R. J.; Johnson, J. R.; Melikechi, N.; Jackson, R.; Fabre, C.; Payré, V.; Grotzinger, J. P.; Vasavada, A. R.; Crisp, J. A.

    2015-12-01

    ChemCam on Curiosity has used LIBS to obtain elemental compositions of >6000 target points at distances to 7.4 m from the rover. Observations include igneous clasts, sediments, diagenetic features, and other details often not accessible by the rover arm. A major re-calibration was recently completed using >350 standards. This significantly improved the accuracies of mineral end-members including plag-feldspars, hi-Si compositions, oxide grains, Mg-rich end-members (presumably Mg saponites; not yet confirmed by CheMin), and Mg and Ca sulfates. Here we draw conclusions from the overall compositional distributions observed in Gale crater from landing until the present using the new calibration. Observations from Bradbury Rise (sols 0-53, 326-520) show a scattering of compositions toward mineral end-members from igneous clasts and pebbles transported from the crater rim. In contrast, Sheepbed mudstones (first drill location; sols 126-300) form a tight cluster close to average Mars composition. The nearby Shaler fluvial sandstone outcrop (sols 306-325)--the first outcrop of potential deltaic foreset beds--shows K enrichment. This enrichment reaches a peak of 6 wt % K2O (sol 625) in the Mt. Remarkable member of the Kimberley formation, Kimberley being a drill location flanked by foreset beds 7 km SW of Shaler. The Pahrump outcrop (sols 753-919)—first observed material of the Murray formation at Mt. Sharp's base—shows lower Mg, higher Si, and much higher Al, consistent with stronger alteration. Further along the traverse ChemCam discovered an outcrop of light-toned Murray formation rock (sols 992 on) of nearly pure SiO2+TiO2. Overall, the ChemCam database points to a very strong diversity of inputs and alteration processes within a relatively short distance within Gale. Igneous compositions: while Jake Matijevic, a float analyzed early by APXS, appeared nepheline normative, no clear nepheline has been found by ChemCam. Additionally, despite the significant number of

  18. Source of boron in the Palokas gold deposit, northern Finland: evidence from boron isotopes and major element composition of tourmaline

    Science.gov (United States)

    Ranta, Jukka-Pekka; Hanski, Eero; Cook, Nick; Lahaye, Yann

    2016-11-01

    The recently discovered Palokas gold deposit is part of the larger Rompas-Rajapalot gold-mineralized system located in the Paleoproterozoic Peräpohja Belt, northern Finland. Tourmaline is an important gangue mineral in the Palokas gold mineralization. It occurs as tourmalinite veins and as tourmaline crystals in sulfide-rich metasomatized gold-bearing rocks. In order to understand the origin of tourmaline in the gold-mineralized rocks, we have investigated the major element chemistry and boron isotope composition of tourmaline from three areas: (1) the Palokas gold mineralization, (2) a pegmatitic tourmaline granite, and (3) the evaporitic Petäjäskoski Formation. Based on textural evidence, tourmaline in gold mineralization is divided into two different types. Type 1 is located within the host rock and is cut by rock-forming anthophyllite crystals. Type 2 occurs in late veins and/or breccia zones consisting of approximately 80% tourmaline and 20% sulfides, commonly adjacent to quartz veins. All the studied tourmaline samples belong to the alkali-group tourmaline and can be classified as dravite and schorl. The δ11B values of the three localities lie in the same range, from 0 to -4‰. Tourmaline from the Au mineralization and from the Petäjäskoski Formation has similar compositional trends. Mg is the major substituent for Al; inferred low Fe3+/Fe2+ ratios and Na values (<0.8 atoms per formula unit (apfu)) of all tourmaline samples suggest that they precipitated from reduced, low-salinity fluids. Based on the similar chemical and boron isotope composition and the Re-Os age of molybdenite related to the tourmaline-sulfide-quartz veins, we propose that the tourmaline-forming process is a result of a single magmatic-hydrothermal event related to the extensive granite magmatism at around 1.79-1.77 Ga. Tourmaline was crystallized throughout the hydrothermal process, which resulted in the paragenetic variation between type 1 and type 2. The close association of

  19. An alternative model for within plate basalts generation suggested by their major elements, trace elements and Pb-Sr-Nd isotope compositions

    Science.gov (United States)

    Mashima, H.

    2003-12-01

    Based on geochemistry, the recent favor model for within-plate basalts (WPB) is plumes with eclogite originally formed by inversion of basaltic oceanic crust into eclogite in subduction zones (e.g. Hauri, 1996). Melting experiments of basalt/peridotie hybrids (Kogiso and Takahashi, 1998), however, have demonstrated that the hybrid source model could not explain major element features of WPB, such as FeO* enrichment and Al2O3 depletion compared with MORB. Melting experiments of peridotites and basalt/peridotite hybrids indicate that the sources of WPB are peridotites abnormally enriched in FeO*. Such Fe-rich sources could not be formed by extraction of basalt melt from typical peridotite or mixing of basalt and typical peridotite. A potential candidate for the abnormally Fe-rich source is Archean peridotitic komatiite (APK) which is enriched in FeO* compared with typical peridotite. Attractive features of the recycled APK melting model are as follows: 1) It explains why within-plate basalts are FeO*-rich and Al2O3-poor relative to MORB because of large proportion of cpx in APK. 2) Moderate partial melting of APK forms LREE-enriched partial melts because of selective fusion of cpx. 3) It explains near bulk earth Nd isotope compositions because of relatively flat REE patterns of APK. 4) Archean age of APK is consistent with Pb isotope ofWPB suggesting their sources have Archean age. 5) Compositional spectrum of Archean komatiite suites ranging from peridotitic komatiite to basalts explains that of WPB from silica-under saturated basalt to silica-oversaturated andesite.

  20. Analysis of the elemental composition of Tang Sancai from the four major kilns in China using EDXRF

    Science.gov (United States)

    Ma, Bo; Liu, Long; Feng, Song-Lin; Xu, Qing; Feng, Xiang-Qian

    2014-01-01

    Tang Sancai was widely used in the Tang Dynasty, and the study of this pottery provides information about the sociocultural aspects of the Tang people. To understand the characteristics of the different kilns for the production of Tang Sancai, Energy Dispersive X-ray Fluorescence (EDXRF) was used to analyze 174 Tang Sancai shards. These specimens were selected from four production centers in the Tang Dynasty, namely, the Huangye Kiln, the Huangbu Kiln, the Xing Kiln and the Liquanfang Kiln. The results demonstrate that the clay bodies from different kilns have varying compositions, and each kiln has a unique elemental fingerprint. Of the 17 elements analyzed, TiO2 and Fe2O3 had distinctly different contents in the samples from the Huangye Kiln and the Huangbu Kiln. For the Xing Kiln and the Huangye Kiln, the characteristic elements are Fe2O3 and MnO. For the Xing Kiln and the Huangbu Kiln, the most dissimilar elements are TiO2, MnO and ZnO. When the Principal Component Analysis (PCA) was employed, the data points for the Huangye Kiln, the Huangbu Kiln and the Xing Kiln fell into distinct areas. For the Liquanfang Kiln, the contents of Al2O3 and Fe2O3 in white-bodied samples are different from those of other colors, which indicates that at least two types of raw materials were used. When compared with the white-bodied samples from the other three kilns, the white-bodied samples from the Liquanfang Kiln were found to have compositions similar to those of the samples from the Huangye Kiln, rather than the Huangbu Kiln, although the latter is much closer geographically than the former. All the obtained data provide valuable scientific criteria for provenance identification for Tang Sancai of unknown origin.

  1. Analysis of the elemental composition of Tang Sancai from the four major kilns in China using EDXRF

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Bo; Liu, Long [Key Laboratory of Nuclear Radiation and Nuclear Energy Technology, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Feng, Song-Lin; Xu, Qing [Key Laboratory of Nuclear Radiation and Nuclear Energy Technology, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Feng, Xiang-Qian, E-mail: fengxq@ihep.ac.cn [Key Laboratory of Nuclear Radiation and Nuclear Energy Technology, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China)

    2014-01-15

    Tang Sancai was widely used in the Tang Dynasty, and the study of this pottery provides information about the sociocultural aspects of the Tang people. To understand the characteristics of the different kilns for the production of Tang Sancai, Energy Dispersive X-ray Fluorescence (EDXRF) was used to analyze 174 Tang Sancai shards. These specimens were selected from four production centers in the Tang Dynasty, namely, the Huangye Kiln, the Huangbu Kiln, the Xing Kiln and the Liquanfang Kiln. The results demonstrate that the clay bodies from different kilns have varying compositions, and each kiln has a unique elemental fingerprint. Of the 17 elements analyzed, TiO{sub 2} and Fe{sub 2}O{sub 3} had distinctly different contents in the samples from the Huangye Kiln and the Huangbu Kiln. For the Xing Kiln and the Huangye Kiln, the characteristic elements are Fe{sub 2}O{sub 3} and MnO. For the Xing Kiln and the Huangbu Kiln, the most dissimilar elements are TiO{sub 2}, MnO and ZnO. When the Principal Component Analysis (PCA) was employed, the data points for the Huangye Kiln, the Huangbu Kiln and the Xing Kiln fell into distinct areas. For the Liquanfang Kiln, the contents of Al{sub 2}O{sub 3} and Fe{sub 2}O{sub 3} in white-bodied samples are different from those of other colors, which indicates that at least two types of raw materials were used. When compared with the white-bodied samples from the other three kilns, the white-bodied samples from the Liquanfang Kiln were found to have compositions similar to those of the samples from the Huangye Kiln, rather than the Huangbu Kiln, although the latter is much closer geographically than the former. All the obtained data provide valuable scientific criteria for provenance identification for Tang Sancai of unknown origin.

  2. Primary magmas and mantle sources of Emeishan basalts constrained from major element, trace element and Pb isotope compositions of olivine-hosted melt inclusions

    Science.gov (United States)

    Ren, Zhong-Yuan; Wu, Ya-Dong; Zhang, Le; Nichols, Alexander R. L.; Hong, Lu-Bing; Zhang, Yin-Hui; Zhang, Yan; Liu, Jian-Qiang; Xu, Yi-Gang

    2017-07-01

    Olivine-hosted melt inclusions within lava retain important information regarding the lava's primary magma compositions and mantle sources. Thus, they can be used to infer the nature of the mantle sources of large igneous provinces, which is still not well known and of the subject of debate. We have analysed the chemical compositions and Pb isotopic ratios of olivine-hosted melt inclusions in the Dali picrites, Emeishan Large Igneous Province (LIP), SW China. These are the first in-situ Pb isotope data measured for melt inclusions found in the Emeishan picrites and allow new constraints to be placed on the source lithology of the Emeishan LIP. The melt inclusions show chemical compositional variations, spanning low-, intermediate- and high-Ti compositions, while their host whole rocks are restricted to the intermediate-Ti compositions. Together with the relatively constant Pb isotope ratios of the melt inclusions, the compositional variations suggest that the low-, intermediate- and high-Ti melts were derived from compositionally similar sources. The geochemical characteristics of melt inclusions, their host olivines, and whole-rocks from the Emeishan LIP indicate that Ca, Al, Mn, Yb, and Lu behave compatibly, and Ti, Rb, Sr, Zr, and Nb behave incompatibly during partial melting, requiring a pyroxenite source for the Emeishin LIP. The wide range of Ti contents in the melt inclusions and whole-rocks of the Emeishan basalts reflects different degrees of partial melting in the pyroxenite source at different depths in the melting column. The Pb isotope compositions of the melt inclusions and the OIB-like trace element compositions of the Emeishan basalts imply that mixing of a recycled ancient oceanic crust (EM1-like) component with a peridotite component from the lower mantle (FOZO-like component) could have underwent solid-state reaction, producing a secondary pyroxenite source that was subsequently partially melted to form the basalts. This new model of pyroxenite

  3. Impact of melt migration on the evolution of major and trace element composition in a crystalline mush: Implications for chemical differentiation in the continental crust

    Science.gov (United States)

    Jackson, M.; Solano, J.; Sparks, R. S.; Blundy, J.

    2013-12-01

    Migration of melt through a crystalline mush is common within the continental crust, occurring in magma chambers and lava flows. Mush formation and associated migration of the buoyant melt along grain boundaries is inevitable during melting of initially solid rock, or cooling and crystallisation of magma. Because there is efficient exchange of heat and mass between melt and solid phases, they remain in local thermal and chemical equilibrium. The composition of the melt therefore evolves as it migrates through the mush and, to properly capture this, models are required that include chemical reaction. However, although reactive transport models have been developed for the mantle, none have yet been presented that are applicable to the continental crust. Models developed for the mantle are not directly applicable to the crust, because the initial and boundary conditions are different. We present the first quantitative model of heat, mass and both major and trace element transport in a mush undergoing compaction which accounts for component transport and chemical reaction during melt migration and which is applicable to crustal systems. The model describes the phase behaviour of binary systems (both eutectic and solid solution), with melt and solid composition determined from phase diagrams using the local temperature and bulk composition. Trace element concentration is also determined. The results demonstrate that component transport and chemical reaction generates compositional variation in both major and trace elements that is not captured by existing geochemical models. Even for the simplest case of a homogenous, insulated column that is instantaneously melted then allowed to compact, we find that component transport and reaction leads to spatial variations in major element composition, and produces melt that is more enriched in incompatible elements than predicted by batch melting. In deep crustal hot zones (DCHZ), created by the repeated intrusion of hot, mantle

  4. Major and trace element composition of copiapite-group minerals and coexisting water from the Richmond mine, Iron Mountain, California

    Science.gov (United States)

    Jamieson, H.E.; Robinson, C.; Alpers, C.N.; McCleskey, R.B.; Nordstrom, D.K.; Peterson, Ronald C.

    2005-01-01

    Copiapite-group minerals of the general formula AR4 (SO4)6(OH)2??nH2O, where A is predominantly Mg, Fe2+, or 0.67Al3+, R is predominantly Fe3+, and n is typically 20, are among several secondary hydrous Fe sulfates occurring in the inactive mine workings of the massive sulfide deposit at Iron Mountain, CA, a USEPA Superfund site that produces extremely acidic drainage. Samples of copiapite-group minerals, some with coexisting water, were collected from the Richmond mine. Approximately 200 mL of brownish pore water with a pH of -0.9 were extracted through centrifugation from a 10-L sample of moist copiapite-group minerals taken from pyritic muck piles. The pore water is extremely rich in ferric iron (Fe3+=149 g L-1, FeT=162 g L-1 and has a density of 1.52 g mL-1. The composition of the pore water is interpreted in the context of published phase relations in the Fe2O3- SO3-H2O system and previous work on the chemistry of extremely acid mine waters and associated minerals in the Richmond mine. Two distinct members of the copiapite mineral group were identified in the samples with coexisting water: (1) abundant magnesiocopiapite consisting of platy crystals 10 to 50 ??m and (2) minor aluminocopiapite present as smaller platy crystals that form spheroidal aggregates. The average composition (n=5) of the magnesiocopiapite is (Mg0.90Fe0.172+ Zn0.02Cu0.01)???1.10(Fe3.833+Al0.09)???3.92(SO4) 6.00(OH)1.96??20H2O. Bulk compositions determined by digestion and wet-chemical analysis are consistent with the microanalytical results. These results suggest that magnesiocopiapite is the least soluble member of the copiapite group under the prevailing conditions. Micro-PIXE analysis indicates that the copiapite-group minerals in this sample sequester Zn (average 1420 ppm), with lesser amounts of Cu (average 270 ppm) and As (average 64 ppm). ?? 2004 Elsevier B.V. All rights reserved.

  5. Provenance of late Oligocene to quaternary sediments of the Ecuadorian Amazonian foreland basin as inferred from major and trace element geochemistry and Nd-Sr isotopic composition

    Science.gov (United States)

    Roddaz, Martin; Christophoul, Frédéric; Burgos Zambrano, José David; Soula, Jean-Claude; Baby, Patrice

    2012-08-01

    Oligocene to Quaternary deposits from the Oriente Amazonian foreland basin (Ecuador and Peru) were analyzed for major and trace element geochemistry (46 and 32 samples respectively) and Nd-Sr isotopic systematics (n = 10). Chemical Index of Alteration values lower than those of other Amazonian foreland basin sediments and scattering along the AK join in the A-CN-K diagram indicate that the Oriente foreland basin has been continuously fed by poorly to moderately weathered sediments having an overall Andesitic composition since the Oligocene. Chemical ratios such as Cr/Th and Th/Sc as well as Eu anomaly and Nd-Sr isotopic compositions indicate that most of the analyzed sediments contained a greater proportion of volcanic arc rock material than the other Amazonian foreland basin sediments. When compared with the older sediments The Quaternary sediments are characterized by a greater contribution of the volcanic arc source. The composition of the sediments deposited in the Ecuadorian Amazonian foreland basin is mainly controlled by geodynamic processes. We suspect the Late Pliocene-Pleistocene subduction of the Carnegie ridge to be responsible for the back arc volcanism feeding the Amazonian foreland with more basic materials. Input of young Ecuadorian volcanic rocks may explain the difference in Sr and Nd isotopic ratios of suspended sediments between the Solimoes and the Madeira rivers.

  6. Major and trace element composition of surface sediments from the Southwest Indian Ridge: evidence for the incorporation of a hydrothermal component

    Institute of Scientific and Technical Information of China (English)

    LI Zhenggang; CHU Fengyou; JIN Lu; LI Xiaohu; DONG Yanhui; CHEN Ling; ZHU Jihao

    2016-01-01

    Hydrothermal materials in deep-sea sediments provide a robust tracer to the localized hydrothermal activity at mid-ocean ridges. Major, trace and rare earth element (REE) data for surface sediments collected from the ultraslow spreading Southwest Indian Ridge are presented to examine the existence of hydrothermal component. Biogenic carbonate oozes dominate all the sediment samples, with CaO content varying from 85.5% to 89.9% on a volatile-free basis. The leaching residue of bulk sediments by ~5% HCl is compositionally comparable to the Upper Continental Crust (UCC) in SiO2, Al2O3, CaO, MgO, alkali elements (Rb, Cs) and high field strength elements (Nb, Ta, Zr, Hf, Ti). These detritus-hosted elements are inferred to be prominently derived from the Australian continent by means of eolian dust, while the contribution of local volcaniclastics is insignificant. In addition, the residual fraction shows a clear enrichment in Fe, Mn, and Ba compared with the UCC. Combining the positive Eu anomaly of residual fraction which is opposed to the UCC but the characteristic of hydrothermal fluids and associated precipitates occurred at mid-ocean ridges, the incorporation of localized hydrothermal component can be constrained. REE mixing calculations indicate that more than half REE within the residual fraction (~55%–60%) are derived from a hydrothermal component, which is inferred to be resulted from a diffuse fluid mineralization. The low-temperature diffuse flow may be widely distributed along the slow-ultraslow spreading ridges where crustal faults and fissures abound, and probably have a great mineralization potential.

  7. Vesta's Elemental Composition

    Science.gov (United States)

    Prettyman, T. H.; Beck, A. W.; Feldman, W. C.; Lawrence, D. J.; McCoy, T. J.; McSween, H. Y.; Mittlefehldt, D. W.; Peplowski, P. N.; Raymond, C. A.; Reedy, R. C.; Russell, C. T.; Titus, T. N.; Toplis, M. J.; Yamashita, N.

    2014-01-01

    Many lines of evidence (e.g. common geochemistry, chronology, O-isotope trends, and the presence of different HED rock types in polymict breccias) indicate that the howardite, eucrite, and diogenite (HED) meteorites originated from a single parent body. Meteorite studies show that this protoplanet underwent igneous differentiation to form a metallic core, an ultramafic mantle, and a basaltic crust. A spectroscopic match between the HEDs and 4 Vesta along with a plausible mechanism for their transfer to Earth, perhaps as chips off V-type asteroids ejected from Vesta's southern impact basin, supports the consensus view that many of these achondritic meteorites are samples of Vesta's crust and upper mantle. The HED-Vesta connection was put to the test by the NASA Dawn mission, which spent a year in close proximity to Vesta. Measurements by Dawn's three instruments, redundant Framing Cameras (FC), a Visible-InfraRed (VIR) spectrometer, and a Gamma Ray and Neutron Detector (GRaND), along with radio science have strengthened the link. Gravity measurements by Dawn are consistent with a differentiated, silicate body, with a dense Fe-rich core. The range of pyroxene compositions determined by VIR overlaps that of the howardites. Elemental abundances determined by nuclear spectroscopy are also consistent with HED-compositions. Observations by GRaND provided a new view of Vesta inaccessible by telescopic observations. Here, we summarize the results of Dawn's geochemical investigation of Vesta and their implications.

  8. Major- and Trace-Element Compositions of Indicator Minerals that Occur as Macro- and Megacrysts, and of Xenoliths, from Kimberlites in Northeastern Angola

    Directory of Open Access Journals (Sweden)

    Monica Escayola

    2012-10-01

    Full Text Available In this study, we compare the major- and trace-element compositions of olivine, garnet, and clinopyroxene that occur as single crystals (142 grains, with those derived from xenoliths (51 samples from six kimberlites in the Lucapa area, northeastern Angola: Tchiuzo, Anomaly 116, Catoca, Alto Cuilo-4, Alto Cuilo-63 and Cucumbi-79. The samples were analyzed using electron probe microanalysis (EPMA and laser-ablation inductively coupled plasma-mass spectrometry (LA-ICP-MS. The results suggest different paragenetic associations for these kimberlites in the Lucapa area. Compositional overlap in some of the macrocryst and mantle xenolith samples indicates a xenocrystic origin for some of those macrocrysts. The presence of mantle xenocrysts suggests the possibility of finding diamond. Geothermobarometric calculations were carried out using EPMA data from xenoliths by applying the program PTEXL.XLT. Additional well calibrated single-clinopyroxene thermobarometric calculations were also applied. Results indicate the underlying mantle experienced different equilibration conditions. Subsequent metasomatic enrichment events also support a hypothesis of different sources for the kimberlites. These findings contribute to a better understanding of the petrogenetic evolution of the kimberlites in northeastern Angola and have important implications for diamond exploration.

  9. Trace elemental and 87Sr/86Sr isotopic compositions as a method for identifying sediment sources in a major coastal estuary

    Science.gov (United States)

    Malamud-Roam, F. P.; Ingram, B. L.; Malamud-Roam, K. P.; Collins, J.

    2005-12-01

    Maintenance and health of tidal wetlands depends most fundamentally on adequate sediment supply. In the San Francisco Bay estuary, tidal marshes that once surrounded the estuary providing natural protection from storms, habitat for a variety of plant and animal species and a host of other important ecological functions, are threatened by rising sea level and insufficient sediments. We present results from an ongoing study evaluating the relative sources of sediments that feed the San Francisco Bay tidal marshlands using their geochemical signatures. We have analyzed the concentrations of 21 trace and major elements and 87Sr/86Sr isotopic ratios in the suspended sediments of major tributaries to the Sacramento - San Joaquin Delta and of smaller tributaries surrounding the northern reach of the Bay estuary. We have also analyzed the geochemical compositions of sediments from marsh surface samples and from a series of short (50-100 cm long) sediment cores collected from Novato Creek Marsh, on the western edge of San Pablo bay. Previous results show that the sediments from the three primary end members can be distinguished, and the results presented here will elaborate, using a combination of multivariate analyses and a mixing model to evaluate the likely sources of sediments occupying the marsh surface, both modern and pre- modern (i.e., before large-scale changes to California hydrologic systems). Initial elemental and 87Sr/86Sr isotopic results indicate that a significant share of the suspended sediments in the estuary and on the marsh surfaces may not come from either of the two major river systems, the Sacramento and San Joaquin. The mean 87Sr/86Sr isotopic ratio measured in samples from Sacramento river tributaries is 0. 706380 and the measured mean of samples from the San Joaquin river tributaries is 0.707191. Of the samples collected from local creeks around San Pablo bay that have been analyzed to date, there is a range of Sr isotope values from 0.709243 to 0

  10. Chemical composition of modern and fossil Hippopotamid teeth and implications for paleoenvironmental reconstructions and enamel formation: 1. major and minor element variation

    Directory of Open Access Journals (Sweden)

    G. Brügmann

    2011-05-01

    Full Text Available Bioapatite in mammalian teeth is readily preserved in continental sediments and represents a very important archive for reconstructions of environment and climate evolution. This project intends to provide a detailed data base of major, minor and trace element and isotope tracers for tooth apatite using a variety of microanalytical techniques. The aim is to identify specific sedimentary environments and to improve our understanding on the interaction between internal metabolic processes during tooth formation and external nutritional control and secondary alteration effects. Here, we use the electron microprobe, to determine the major and minor element contents of fossil and modern molar enamel, cement and dentin from hippopotamids. Most of the studied specimens are from different ecosystems in Eastern Africa, representing modern and fossil lakustrine (Lake Kikorongo, Lake Albert, and Lake Malawi and modern fluvial environments of the Nile River system.

    Secondary alteration effects in particular FeO, MnO, SO3 and F concentrations, which are 2 to 10 times higher in fossil than in modern enamel; secondary enrichments in fossil dentin and cement are even higher. In modern and fossil enamel, along sections perpendicular to the enamel-dentin junction (EDJ or along cervix-apex profiles, P2O5 and CaO contents and the CaO/P2O5 ratios are very constant (StdDev ~1 %. Linear regression analysis reveals very tight control of the MgO (R2∼0.6, Na2O and Cl variation (for both R2>0.84 along EDJ-outer enamel rim profiles, despite large concentration variations (40 % to 300 % across the enamel. These minor elements show well defined distribution patterns in enamel, similar in all specimens regardless of their age and origin, as the concentration of MgO and Na2O decrease from the enamel-dentin junction (EDJ towards the outer rim, whereas Cl

  11. Chemical composition of modern and fossil Hippopotamid teeth and implications for paleoenvironmental reconstructions and enamel formation - Part 1: Major and minor element variation

    Science.gov (United States)

    Brügmann, G.; Krause, J.; Brachert, T. C.; Kullmer, O.; Schrenk, F.; Ssemmanda, I.; Mertz, D. F.

    2012-01-01

    Bioapatite in mammalian teeth is readily preserved in continental sediments and represents a very important archive for reconstructions of environment and climate evolution. This project provides a comprehensive data base of major, minor and trace element and isotope tracers for tooth apatite using a variety of microanalytical techniques. The aim is to identify specific sedimentary environments and to improve our understanding on the interaction between internal metabolic processes during tooth formation and external nutritional control and secondary alteration effects. Here, we use the electron microprobe to determine the major and minor element contents of fossil and modern molar enamel, cement and dentin from Hippopotamids. Most of the studied specimens are from different ecosystems in Eastern Africa, representing modern and fossil lacustrine (Lake Kikorongo, Lake Albert, and Lake Malawi) and modern fluvial environments of the Nile River system. Secondary alteration effects - in particular FeO, MnO, SO3 and F concentrations - are 2 to 10 times higher in fossil than in modern enamel; the secondary enrichment of these components in fossil dentin and cement is even higher. In modern and fossil enamel, along sections perpendicular to the enamel-dentin junction (EDJ) or along cervix-apex profiles, P2O5 and CaO contents and the CaO/P2O5 ratios are very constant (StdDev ∼1%). Linear regression analysis reveals tight control of the MgO (R2∼0.6), Na2O and Cl variation (for both R2>0.84) along EDJ-outer enamel rim profiles, despite large concentration variations (40% to 300%) across the enamel. These minor elements show well defined distribution patterns in enamel, similar in all specimens regardless of their age and origin, as the concentration of MgO and Na2O decrease from the enamel-dentin junction (EDJ) towards the outer rim, whereas Cl displays the opposite trend. Fossil enamel from Hippopotamids which lived in the saline Lake Kikorongo have a much higher MgO/Na2

  12. Chemical composition of modern and fossil Hippopotamid teeth and implications for paleoenvironmental reconstructions and enamel formation: 1. major and minor element variation

    Science.gov (United States)

    Brügmann, G.; Krause, J.; Brachert, T. C.; Kullmer, O.; Schrenk, F.; Ssemmanda, I.; Mertz, D. F.

    2011-05-01

    Bioapatite in mammalian teeth is readily preserved in continental sediments and represents a very important archive for reconstructions of environment and climate evolution. This project intends to provide a detailed data base of major, minor and trace element and isotope tracers for tooth apatite using a variety of microanalytical techniques. The aim is to identify specific sedimentary environments and to improve our understanding on the interaction between internal metabolic processes during tooth formation and external nutritional control and secondary alteration effects. Here, we use the electron microprobe, to determine the major and minor element contents of fossil and modern molar enamel, cement and dentin from hippopotamids. Most of the studied specimens are from different ecosystems in Eastern Africa, representing modern and fossil lakustrine (Lake Kikorongo, Lake Albert, and Lake Malawi) and modern fluvial environments of the Nile River system. Secondary alteration effects in particular FeO, MnO, SO3 and F concentrations, which are 2 to 10 times higher in fossil than in modern enamel; secondary enrichments in fossil dentin and cement are even higher. In modern and fossil enamel, along sections perpendicular to the enamel-dentin junction (EDJ) or along cervix-apex profiles, P2O5 and CaO contents and the CaO/P2O5 ratios are very constant (StdDev ~1 %). Linear regression analysis reveals very tight control of the MgO (R2∼0.6), Na2O and Cl variation (for both R2>0.84) along EDJ-outer enamel rim profiles, despite large concentration variations (40 % to 300 %) across the enamel. These minor elements show well defined distribution patterns in enamel, similar in all specimens regardless of their age and origin, as the concentration of MgO and Na2O decrease from the enamel-dentin junction (EDJ) towards the outer rim, whereas Cl displays the opposite variation. Fossil enamel from hippopotamids which lived in the saline Lake Kikorongo have a much higher MgO/Na2O

  13. Major Element Compositions and Rare—earth Element Abundaces of Cenozoic Basalts in Eastern China:Implications for a Pressure Control over LREE/HREE Fractionation in Continental Basalt

    Institute of Scientific and Technical Information of China (English)

    刘丛强; AKIMASAMASUDA; 等

    1992-01-01

    Major element compositions and rare-earth element (REE) and transition element(Ni,Cr and V) abundances have been determined on 44 basalt samples from eastern China.These basalts have SiO2 contents ranging from 38.63 to 55.24(wt.%),and Na2O+K2O from 3.1 to 9.4(wt.%).Ni and Cr abundances are largely variable,respectively falling in ranges 60-605 and 78-1150 ppm.REE abundances,especially light rare-earth elements(LREE), are highly variable.La/Sm and La/Yb ratios vary 2.8 to 7.6 and 1.8 to 8.1. Although the segregation mainly of olivine and clinopyroxene is requested to account for the vari-able and low MgO,CaO/Al2O3,Cr and Ni characteristic of these basalts studied here,the differ-ences in REE composition of the basalts are still related mainly to the partial melting process.Obvious varations in REE abundances could be principally attributed to the partial melting process.Obvious variations in REE abundances could be principally attributed to the partial melting processes that took place at different depths,in spite of some variations caused by the fractional crystallization processes.REE abundances and La/Sm and La/Yb ratios systematically decrease with increasing SiO2,which probably indicated that the basaltic magma derived from a deeper level has higher LREE and LREE/HREE ratios than that from a shallower level.As viewed from the fact that the DYb/DLa ratios of clinopyroxenes in the basaltic system increase with increasing pressure,the increase of LREE/HUEE ratios with increasing melting depth can be interpreted as the pressure dependence of bulk DHREE/DLREE ratios of silicate minerals,in addition to the pressure control over the melting degree.

  14. Compositional characteristics and Existing Forms of Major,Trace and Rare—earth Elements in Cassiterite,Dupangling Tin Ore Field,Guangxi

    Institute of Scientific and Technical Information of China (English)

    干国梁; 陈志雄

    1994-01-01

    Trace elements in cassiterite,including Ta,W,Fe,Mn,Ti,Zr,V,Sc,Si,Al,In,Ga,Ge,Be,Bi,Ag,Sb,As,Cu,Pb,Zn,Co and REE,have been studied by many workers (Shan Zhenhua etal.,1998;Huang Zhou Tianren et al.,1987;Wu Qingsheng et al.,1988;Hu Zening,1988,Li Zhong-qing 1988 Mingzhei et al.,1988;Wang Lihua et al.,1988;Liu Kanghuai,1990).Up to now,however,most of the previous studies are concerned with trace-element variations in cassiterites of different occurrences and colors from different types of ore deposits,Data concerning the modes of occurrence of these trace elements are rare,except for the contention that Nb-Ta,Fe2+-Mn-Fe3+ and W-Fe3+ may substitute isomorphously for Sn as pointed out by Zhou Tianren et al.(1987) and Moller et al.(1988).In this paper we are concerned with the compositional characteristics as well as the modes of occurrence of trace elements in cassiterites from quartz veins and greisens in the Dupangling tin field,Guangxi,based on multivariate statistical analyses.Tin mineralization in the Dupangling area is found associated with the medium-to fine-grained protolithionite-albite granite(γ52b) and its outer contacts.Cassiterite occurs,with wolframite,both in quartz veins in the contact and in greisens within the granite.1) Spatially,greisens become dominant over quartz veins in the contact andin greisens with the granite.1)Spatialy,gresens become dominant over quartz veins in going from the contact to the interior of the granite and with increasing depth.The greisens are of various shapes.The vein-shaped and the sheet-shaped greisens at the top of the granie are rich in quartz and the chambered greiens always constitute rich ores and contain abundant topaz or mica.Genetically,Sn,W mineralizations associated with the protolithionite-albite granite(γ52b) are considered to have been formed from fluid melt derived from the ore-forming magma responsible for the granite(γ52b).

  15. Characterization of the Etna volcanic emissions through an active biomonitoring technique (moss-bags): part 1--major and trace element composition.

    Science.gov (United States)

    Calabrese, S; D'Alessandro, W; Bellomo, S; Brusca, L; Martin, R S; Saiano, F; Parello, F

    2015-01-01

    Active biomonitoring using moss-bags was applied to an active volcanic environment for the first time. Bioaccumulation originating from atmospheric deposition was evaluated by exposing mixtures of washed and air-dried mosses (Sphagnum species) at 24 sites on Mt. Etna volcano (Italy). Concentrations of major and a large suite of trace elements were analysed by inductively coupled mass and optical spectrometry (ICP-MS and ICP-OES) after total acid digestion. Of the 49 elements analysed those which closely reflect summit volcanic emissions were S, Tl, Bi, Se, Cd, As, Cu, B, Na, Fe, Al. Enrichment factors and cluster analysis allowed clear distinction between volcanogenic, geogenic and anthropogenic inputs that affect the local atmospheric deposition. This study demonstrates that active biomonitoring with moss-bags is a suitable and robust technique for implementing inexpensive monitoring in scarcely accessible and harsh volcanic environments, giving time-averaged quantitative results of the local exposure to volcanic emissions. This task is especially important in the study area because the summit area of Mt. Etna is visited by nearly one hundred thousand tourists each year who are exposed to potentially harmful volcanic emissions. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. The chemical composition of nearby young associations: s-process element abundances in AB Doradus, Carina-Near, and Ursa Major

    CERN Document Server

    D'Orazi, Valentina; Desidera, Silvano; Covino, Elvira; Andrievsky, Sergei M; Gratton, Raffaele G

    2012-01-01

    Recently, several studies have shown that young, open clusters are characterised by a considerable over-abundance in their barium content. In particular, D'Orazi et al. (2009) reported that in some younger clusters [Ba/Fe] can reach values as high as ~0.6 dex. The work also identified the presence of an anti-correlation between [Ba/Fe] and cluster age. For clusters in the age range ~4.5 Gyr-500 Myr, this is best explained by assuming a higher contribution from low-mass asymptotic giant branch stars to the Galactic chemical enrichment. The purpose of this work is to investigate the ubiquity of the barium over-abundance in young stellar clusters. We analysed high-resolution spectroscopic data, focusing on the s-process elemental abundance for three nearby young associations, i.e. AB Doradus, Carina-Near, and Ursa Major. The clusters have been chosen such that their age spread would complement the D'Orazi et al. (2009) study. We find that while the s-process elements Y, Zr, La, and Ce exhibit solar ratios in all...

  17. Analysis of composite structural elements

    Directory of Open Access Journals (Sweden)

    A. Baier

    2010-12-01

    Full Text Available Purpose: The themes of the study are composite structural components. For this purpose have been designed and built several research positions.Design/methodology/approach: Using different structural materials to build new device components requires multiple tests of the components. Research posts were designed in the advanced graphical program CAx Siemens NX 7.5. Analysed samples were made from the glass fibre, aramid and carbon of various weights. Due to the specific use of composite materials it focuses on the elements in the form of plates and flat bars. For the examination of experimental strain gauge technique was used bead, the force sensor and displacement sensor. The experimental methods were compared with computer simulation using the FEM.Findings: The aim of this study was to determine the basic material constants and a comparison of the experimental method and the method of computer simulation.Research limitations/implications: Change the number of layers and how to connect the laminate with the steel plate changes mechanical properties of the structural component.Practical implications: The ultimate result will be knowledge on the different forms of laminates, such as material properties, the stresses in all layers, strain and comparing the results obtained by two methods.Originality/value: The expected outcome of the study will be the composition and method of joining composite laminate with a steel plate to the possible application in the repair and construction of structural elements of freight wagons.

  18. Composite oxygen ion transport element

    Science.gov (United States)

    Chen, Jack C.; Besecker, Charles J.; Chen, Hancun; Robinson, Earil T.

    2007-06-12

    A composite oxygen ion transport element that has a layered structure formed by a dense layer to transport oxygen ions and electrons and a porous support layer to provide mechanical support. The dense layer can be formed of a mixture of a mixed conductor, an ionic conductor, and a metal. The porous support layer can be fabricated from an oxide dispersion strengthened metal, a metal-reinforced intermetallic alloy, a boron-doped Mo.sub.5Si.sub.3-based intermetallic alloy or combinations thereof. The support layer can be provided with a network of non-interconnected pores and each of said pores communicates between opposite surfaces of said support layer. Such a support layer can be advantageously employed to reduce diffusion resistance in any type of element, including those using a different material makeup than that outlined above.

  19. Major element composition of an Early Enriched Reservoir: constraints from 142Nd/144Nd isotope systematics in the early Earth and high-pressure melting experiments of a primitive peridotite

    Science.gov (United States)

    Kondo, Nozomi; Yoshino, Takashi; Matsukage, Kyoko N.; Kogiso, Tetsu

    2016-12-01

    The Accessible Silicate Earth (ASE) has a higher 142Nd/144Nd ratio than most chondrites. Thus, if the Earth is assumed to have formed from these chondrites, a complement low-142Nd/144Nd reservoir is needed. Such a low-142Nd/144Nd reservoir is believed to have been derived from a melt in the early Earth and is called the Early Enriched Reservoir (EER). Although the major element composition of the EER is crucial for estimating its chemical and physical properties (e.g., density) and is also essential for understanding the origin and fate of the EER, which are both major factors that determine the present composition of the Earth, it has not yet been robustly established. In order to determine the major element composition of the EER, we estimated the age and pressure-temperature conditions to form the EER that would best explain its Nd isotopic characteristics, based on Sm-Nd partitioning and its dependence on pressure, temperature, and melting phase relations. Our estimate indicates that the EER formed within 33.5 Myr of Solar System formation and at near-solidus temperatures and shallow upper-mantle pressures. We then performed high-pressure melting experiments on primitive peridotite to determine the major element composition of the EER at estimated temperature at 7 GPa and calculated the density of the EER. The result of our experiments indicates that the near-solidus melt is iron-rich komatiite. The estimated density of the near-solidus melt is lower than that of the primitive peridotite, suggesting that the EER melt would have ascended in the mantle to form an early crust. Given that high mantle potential temperatures are assumed to have existed in the Hadean, it follows that the EER melt was generated at high pressure and, therefore, its composition would have been picritic to komatiitic. As the formation age of the EER estimated in our study precedes the last giant, lunar-forming impact, the picritic to komatiitic crust (EER) would most likely have been

  20. Elemental composition of Malawian rice.

    Science.gov (United States)

    Joy, Edward J M; Louise Ander, E; Broadley, Martin R; Young, Scott D; Chilimba, Allan D C; Hamilton, Elliott M; Watts, Michael J

    2016-07-20

    Widespread potential dietary deficiencies of calcium (Ca), iron (Fe), iodine (I), selenium (Se) and zinc (Zn) have been identified in Malawi. Several deficiencies are likely to be compounded by high phytic acid (PA) consumption. Rice (Oryza sativa) is commonly consumed in some Malawian populations, and its mineral micronutrient content is important for food security. The considerable irrigation requirements and flooded conditions of paddy soils can also introduce or mobilise potentially toxic elements including arsenic (As), cadmium (Cd) and lead (Pb). The aim of this study was to determine the mineral composition of rice sampled from farmers' fields and markets in Malawi. Rice was sampled from 18 extension planning areas across Malawi with 21 white (i.e. polished) and 33 brown samples collected. Elemental composition was determined by inductively coupled plasma-mass spectrometry (ICP-MS). Arsenic speciation was performed using high-performance liquid chromatography (HPLC)-ICP-MS. Concentration of PA was determined using a PA-total phosphorus assay. Median total concentrations (mg kg(-1), dry weight) of elements important for human nutrition in brown and white rice, respectively, were: Ca = 66.5 and 37.8; Cu = 3.65 and 2.49; Fe = 22.1 and 7.2; I = 0.006 and Biofortification strategies could significantly increase Se and Zn concentrations and require further investigation. Concentrations of Fe in rice grain varied greatly, and this was likely due to contamination of rice samples with soil. Risk of As, Cd or Pb toxicity due to rice consumption in Malawi appears to be minimal.

  1. Biogeochemistry of Hot Spring Biofilms: Major and Trace Element Behavior

    Science.gov (United States)

    Havig, J. R.; Prapaipong, P.; Zolotova, N.; Moore, G.; Shock, E. L.

    2008-12-01

    Hot spring biofilms are of obvious biological origin, but of surprising composition. Organic carbon makes up a minor percentage of the total mass of chemotrophic and phototrophic biofilms. We have found that the majority of biofilm mass is inorganic material, largely silica, with measurable quantities of dozens of other elements, and that the distribution of major elements mimics that of surrounding rock and soil far more closely than the hot spring fluids. Comparisons of biofilms with the compositions of their geochemical surroundings help identify trace elements that are anomalously enriched or depleted. These anomalies provide insight into the processes of active or passive elemental accumulation by biofilms, which could be used to understand microbial processes of element uptake or to identify evidence for life in hydrothermal deposits in the rock record. Five separate hydrothermal systems in Yellowstone National Park were incorporated into this study: 'Bison Pool' and its outflow (siliceous-sinter depositing, temp. = 93.2 to 56.2 C, pH = 7.4 to 8.3), Flatcone Geyser and its outflow (siliceous-sinter depositing, temp. = 94.3 to 44.3 C, pH = 7.9 to 8.8, Boulder Spring and its outflow (siliceous-sinter depositing, temp. = 92.1 to 64.9 C, pH = 8.2 to 8.7), Octopus Spring and its outflow (siliceous-sinter depositing, temp. = 91.4 to 62.8 C, pH = 7.7 to 8.2), and two unnamed locations in the Obsidian Pool area we have dubbed 'Green Cheese' (temp. = 64.5 to 54.9 C, pH = 5.9 to 6.2) and 'Happy Harfer Pool' (temp. = 59.9 to 48.3 C, pH = 5.5 to 6.3). Analysis of water, biofilm, and contextual samples collected from and around these hot springs offer intriguing patterns of elemental behavior, both similar and dissimilar, among the varying systems. Examples of these patterns include elements that behave the same across all hot spring systems (B, C, Ni, Cu, Ge, Sb, and W), elements with behavior that was consistent throughout most (four of five) of the hot spring systems

  2. GEMAS: Distribution of major elements in Polish agricultural soil

    Science.gov (United States)

    Dusza-Dobek, Aleksandra; Pasieczna, Anna; Kwecko, Paweł

    2014-05-01

    Amount and quality of produced food is highly dependent on soil chemical properties and composition. The GEMAS project (Geochemical Mapping of Agricultural and Grazing Land Soil of Europe) has provided new homogeneous geochemical data for Polish agricultural soils. This study presents the distribution of common major elements such as CaO, MgO, Fe2O3, Al2O3, K2O, Na2O, SiO2, determined in 129 samples of agricultural soil of Poland. The total element concentrations obtained by X-ray fluorescence spectroscopy (XRF) were compared with the results from aqua regia acid digestion determined by ICP-MS. The distribution patterns of selected major elements reveal two major geochemical provinces - the northern province and the southern province, distinguished with respect to the natural geochemical background and resulting from the geological evolution of the region. The soil of the northern province (Polish Lowland), dominated by glacial deposits, show low contents of CaO, MgO, Fe2O3, Al2O3, K2O, Na2O, and high contents of SiO2. High silica content reflects the presence of sand-rich deposits which belong to the larger European feature with cover sands and loess of mainly Weichselian age and stretching from Ukraine to western Germany and Denmark. The southern province is characterised by high concentrations of almost all major elements (except SiO2). Soils in the Sudetes, Upper Silesia and the Carpathian Mountains developed in majority on pre-Quaternary rocks. In the Sudetes, soil formed on magmatic and metamorphic rocks of Paleozoic age. In the Carpathians and Upper Silesia, the flysch and molasse formations containing various material of magmatic and sedimentary origin constitute the immediate substratum of soil.

  3. A MATLAB toolbox and Excel workbook for calculating the densities, seismic wave speeds, and major element composition of minerals and rocks at pressure and temperature

    Science.gov (United States)

    Abers, Geoffrey A.; Hacker, Bradley R.

    2016-02-01

    To interpret seismic images, rock seismic velocities need to be calculated at elevated pressure and temperature for arbitrary compositions. This technical report describes an algorithm, software, and data to make such calculations from the physical properties of minerals. It updates a previous compilation and Excel® spreadsheet and includes new MATLAB® tools for the calculations. The database of 60 mineral end-members includes all parameters needed to estimate density and elastic moduli for many crustal and mantle rocks at conditions relevant to the upper few hundreds of kilometers of Earth. The behavior of α and β quartz is treated as a special case, owing to its unusual Poisson's ratio and thermal expansion that vary rapidly near the α-β transition. The MATLAB tools allow integration of these calculations into a variety of modeling and data analysis projects.

  4. Major and trace-element composition and pressure-temperature evolution of rock-buffered fluids in low-grade accretionary-wedge metasediments, Central Alps

    Science.gov (United States)

    Miron, George D.; Wagner, Thomas; Wälle, Markus; Heinrich, Christoph A.

    2013-05-01

    The chemical composition of fluid inclusions in quartz crystals from Alpine fissure veins was determined by combination of microthermometry, Raman spectroscopy, and LA-ICPMS analysis. The veins are hosted in carbonate-bearing, organic-rich, low-grade metamorphic metapelites of the Bündnerschiefer of the eastern Central Alps (Switzerland). This strongly deformed tectonic unit is interpreted as a partly subducted accretionary wedge, on the basis of widespread carpholite assemblages that were later overprinted by lower greenschist facies metamorphism. Veins and their host rocks from two locations were studied to compare several indicators for the conditions during metamorphism, including illite crystallinity, graphite thermometry, stability of mineral assemblages, chlorite thermometry, fluid inclusion solute thermometry, and fluid inclusion isochores. Fluid inclusions are aqueous two-phase with 3.7-4.0 wt% equivalent NaCl at Thusis and 1.6-1.7 wt% at Schiers. Reproducible concentrations of Li, Na, K, Rb, Cs, Mg, Ca, Sr, Ba, B, Al, Mn, Cu, Zn, Pb, As, Sb, Cl, Br, and S could be determined for 97 fluid inclusion assemblages. Fluid and mineral geothermometry consistently indicate temperatures of 320 ± 20 °C for the host rocks at Thusis and of 250 ± 30 °C at Schiers. Combining fluid inclusion isochores with independent geothermometers results in pressure estimates of 2.8-3.8 kbar for Thusis, and of 3.3-3.4 kbar for Schiers. Pressure-temperature estimates are confirmed by pseudosection modeling. Fluid compositions and petrological modeling consistently demonstrate that chemical fluid-rock equilibrium was attained during vein formation, indicating that the fluids originated locally by metamorphic dehydration during near-isothermal decompression in a rock-buffered system.

  5. Major element compositions of fluid inclusions from hydrothermal vein-type deposits record eroded sedimentary units in the Schwarzwald district, SW Germany

    Science.gov (United States)

    Walter, Benjamin F.; Burisch, Mathias; Marks, Michael A. W.; Markl, Gregor

    2017-02-01

    Mixing of sedimentary formation fluids with basement-derived brines is an important mechanism for the formation of hydrothermal veins. We focus on the sources of the sediment-derived fluid component in ore-forming processes and present a comprehensive fluid inclusion study on 84 Jurassic hydrothermal veins from the Schwarzwald mining district (SW Germany). Our data derive from about 2300 fluid inclusions and reveal differences in the average fluid composition between the northern, central, and southern Schwarzwald. Fluids from the northern and southern Schwarzwald are characterised by high salinities (18-26 wt% NaCl+CaCl2), low Ca/(Ca+Na) mole ratios (0.1-0.4), and variable Cl/Br mass ratios (30-1140). In contrast, fluids from the central Schwarzwald show even higher salinities (23-27 wt% NaCl+CaCl2), higher Ca/(Ca+Na) mole ratios (0.2-0.9), and less variable Cl/Br mass ratios (40-130). These fluid compositions correlate with the nature and thickness of the now eroded sedimentary cover rocks. Compared to the northern and the southern Schwarzwald, where halite precipitation occurred during the Middle Triassic, the sedimentary basin in the central Schwarzwald was relatively shallow at this time and no halite was precipitated. Accordingly, Cl/Br ratios of fluids from the central Schwarzwald provide no evidence for the reaction of a sedimentary brine with halite, whereas those from the northern and southern Schwarzwald do. Instead, elevated Ca/(Ca+Na), high SO4 contents, and relatively low Cl/Br imply the presence of a gypsum dissolution brine during vein formation in the central Schwarzwald which agrees with the reconstructed regional Triassic geology. Hence, the information archived in fluid inclusions from hydrothermal veins in the crystalline basement has the potential for reconstructing sedimentary rocks in the former overburden.

  6. Fluid sources and metallogenesis in the Blackbird Co-Cu-Au-Bi-Y-REE district, Idaho, U.S.A.: Insights from major-element and boron isotopic compositions of tourmaline

    Science.gov (United States)

    Trumbull, R.B.; Slack, J.F.; Krienitz, M.-S.; Belkin, H.E.; Wiedenbeck, M.

    2011-01-01

    Tourmaline is a widespread mineral in the Mesoproterozoic Blackbird Co-Cu-Au-Bi-Y-REE district, Idaho, where it occurs in both mineralized zones and wallrocks. We report here major-element and B-isotope compositions of tourmaline from stratabound sulfide deposits and their metasedimentary wallrocks, from mineralized and barren pipes of tourmaline breccia, from late barren quartz veins, and from Mesoproterozoic granite. The tourmalines are aluminous, intermediate in the schorl-dravite series, with Fe/(Fe + Mg) values of 0.30 to 0.85, and 10 to 50% X-site vacancies. Compositional zoning is prominent only in tourmaline from breccias and quartz veins; crystal rims are enriched in Mg, Ca and Ti, and depleted in Fe and Al relative to cores. The chemical composition of tourmaline does not correlate with the presence or absence of mineralization. The ??11B values fall into two groups. Isotopically light tourmaline (-21.7 to-7.6%o) occurs in unmineralized samples from wallrocks, late quartz veins and Mesoproterozoic granite, whereas heavy tourmaline (-6.9 to +3.2%o) is spatially associated with mineralization (stratabound and breccia-hosted), and is also found in barren breccia. At an inferred temperature of 300??C, boron in the hydrothermal fluid associated with mineralization had ??11B values of-3 to +7%o. The high end of this range indicates a marine source of the boron. A likely scenario involves leaching of boron principally from marine carbonate beds or B-bearing evaporites in Mesoproterozoic strata of the region. The ??11B values of the isotopically light tourmaline in the sulfide deposits are attributed to recrystallization during Cretaceous metamorphism, superimposed on a light boron component derived from footwall siliciclastic sediments (e.g., marine clays) during Mesoproterozoic mineralization, and possibly a minor component of light boron from a magmatic-hydrothermal fluid. The metal association of Bi-Be-Y-REE in the Blackbird ores suggests some magmatic input

  7. Infiltration of Refractory Melts into the Sub-Oceanic Mantle: Evidence from Major and Minor Element Compositions of Minerals from the 53° E Amagmatic Segment Abyssal Peridotites at the Southwest Indian Ridge

    Science.gov (United States)

    Gao, C.; Dick, H. J.; Zhou, H.; Liu, Y.; Wang, J.

    2014-12-01

    Elevated sodium and titanium in pyroxene and spinel with high TiO2 (> 0.2 wt%) are suggested as the geochemical characteristic for the MORB-like melt infiltration of peridotites. The petrological and geochemical results of melt infiltrating in mantle peridotites are controlled by not only the melt composition but also the melt/rock ratio. Large discordant dunite bodies in the mantle transition zone are the direct observation of large volume melt (high melt/rock ratio) infiltrating by channeled porous flow in the shallow mantle (1). In addition to dunites, melt infiltrating results in a large variety of vein lithologies in mantle, and the occurrence of plagioclases are considered as a petrological signal of melt-reaction at shallow depth (2, 3) with a medium melt/rock ratio. Because the lacking of obviously petrological and geochemical variation of peridotites, melt infiltration of peridotites with a low melt/rock ratio are rarely reported. Peridotites in this study are from the 53° E amagmatic segment at the Southwest Indian Ridge. These peridotites are suggested as highly depleted buoyant mantle drawn up from the asthenosphere beneath southern Africa during the breakup of Gondwanaland (4) and are residues of multi-stage melt extracting in both spinel and garnet field. We present a detailed analysis of mineral compositions by both the EMPA and LA-ICPMS. Mineral phases in 53°E peridotites have mantle major element compositions, although minerals show variations with the crystal size and the location from cores to rims (Fig.1). In conjunction with the profile analysis of large clinopyroxene crystals, our results document the melt infiltration occurred at the ultraslow-spreading environment. At least two kinds of percolation melts are distinguished. They are normally MORB-like melt and ultra-depleted melt. Reference1.P. B. Kelemen, H. J. B. Dick, Journal of Geophysical Research-Solid Earth 100, 423 (Jan, 1995). 2.J. M. Warren, N. Shimizu, Journal of Petrology 51

  8. Major elemental compositions of Tertiary sediments in Lanzhou Basin and their paleoenvironment implication%兰州盆地第三纪沉积物常量元素变化及其古环境意义

    Institute of Scientific and Technical Information of China (English)

    王扬; 刘星星; 李再军; 孙东怀; 孙有斌

    2016-01-01

    deposition. (3) Ca and Na may be associated with the formation of salts (i.e., salt and gypsum) during the chemical deposition, thus the Na/Al and Ca/Al ratios can be employed to infer the evolution of sedimentary environment. According to the element ratios and sedimentary facies research, the Tertiary paleoenvironmental evolution in the Lanzhou Basin can be divided into four stages: (1) lfuvial environment under a warm and humid climate at 54 — 43 Ma; (2) development of salt lake with high Na/Al ratios during 43 — 33 Ma; (3) lfuctuated salt lake from 33 Ma to 23 Ma with a signiifcant increase in Ca/Al ratio formed under semi-arid and semi-humid climate, and (4) shifts from salt-brackish lake to gradual aridiifcation environment lake after 23 Ma.Conclusions Combination of available proxy indicators including grain size, color, magnetic susceptibility and major elemental compositions suggests stepwise drying of the Lanzhou Basin occurred around 43 Ma, 33 Ma, and 23 Ma, respectively. Taking into account evidence of global cooling and regional tectonics, we tentatively attribute the ifrst two drying events to global cooling and the last drying in early Miocene to regional uplift of the northern Tibet Plateau.Recommendations and perspectives The results provide signiifcant stages of aridiifcation in the Lanzhou Basin. It is recommended that more work should be carried out to deepen the cognition of the Tertiary paleoenvironmental evolution in the Lanzhou Basin.

  9. Proposed multigenic Composite Inheritance in major depression.

    Science.gov (United States)

    Raymer, Katherine A; Waters, Robert F; Price, Catherine R

    2005-01-01

    Various rationale have been considered in the familial inheritance pattern of major depression ranging from simple one-gene Mendelian inheritance to pseudo-additive gene action. We instead predict broad genetic expressivity patterns in the progeny of parents where at least one parent has recurrent major depression. In keeping with this idea, we feel that recurrent major depression could involve an expression imbalance of "normal" genes either exclusively or along with allelic variation(s). The patterns of pathology are theoretically conceptualized as qualitative and quantitative, meaning that expressivity of the genetic pattern in these children may range from minimal to complete even among siblings. Thus, prediction of the particular genetic pattern expressed by a particular child might prove difficult. The complex inheritance pattern that we propose is referred to as Composite Inheritance. Composite Inheritance considers that both the up- and down-regulation of luxury genes and housekeeping genes are involved in this dichotomous qualitative inheritance pattern and also the wide quantitative expressivity. The luxury genes include such genes as those coding for the neurotransmitter transporters and receptors. The housekeeping genes found to date include those that code for proteins involved in gene transcription, secondary signaling systems, fatty acid metabolism and transport, and intracellular calcium homeostasis. Other luxury and housekeeping genes no doubt remain to be discovered. Our current research utilizes an empirical approach involving advanced genomics and specialized pattern recognition mathematics in families having at least one parent with recurrent major depression. The goal of our research is to develop a pattern recognition system of genetic expressivity in major depression to which prevention and early intervention may be tailored.

  10. Composite structure of auxin response elements.

    Science.gov (United States)

    Ulmasov, T; Liu, Z B; Hagen, G; Guilfoyle, T J

    1995-10-01

    The auxin-responsive soybean GH3 gene promoter is composed of multiple auxin response elements (AuxREs), and each AuxRE contributes incrementally to the strong auxin inducibility to the promoter. Two independent AuxREs of 25 bp (D1) and 32 bp (D4) contain the sequence TGTCTC. Results presented here show that the TGTCTC element in D1 and D4 is required but not sufficient for auxin inducibility in carrot protoplast transient expression assays. Additional nucleotides upstream of TGTCTC are also required for auxin inducibility. These upstream sequences showed constitutive activity and no auxin inducibility when part or all of the TGTCTC element was mutated or deleted. In D1, the constitutive element overlaps the 5' portion of TGTCTC; in D4, the constitutive element is separated from TGTCTC. An 11-bp element in D1, CCTCGTGTCTC, conferred auxin inducibility to a minimal cauliflower mosaic virus 35S promoter in transgenic tobacco seedlings as well as in carrot protoplasts (i.e., transient expression assays). Both constitutive elements bound specifically to plant nuclear proteins, and the constitutive element in D1 bound to a recombinant soybean basic leucine zipper transcription factor with G-box specificity. To demonstrate further the composite nature of AuxREs and the ability of the TGTCTC element to confer auxin inducibility, we created a novel AuxRE by placing a yeast GAL4 DNA binding site adjacent to the TGTCTC element. Expression of a GAL4-c-Rel transactivator in the presence of this novel AuxRE resulted in auxin-inducible expression. Our results indicate that at least some AuxREs have a composite structure consisting of a constitutive element adjacent to a conserved TGTCTC element that confers auxin inducibility.

  11. Including supplementary elements in a compositional biplot

    Science.gov (United States)

    Daunis-i-Estadella, J.; Thió-Henestrosa, S.; Mateu-Figueras, G.

    2011-05-01

    The biplot is a widely and powerful methodology used with multidimensional data sets to describe and display the relationships between observations and variables in an easy way. Compositional data are vectors with positive components, whose sum is constant because they represent a relative contribution of different parts to a whole; due to this property standard biplots cannot be performed with compositional data, instead of a previous transformation of the data is performed. In this paper, we extend the compositional biplot defined by Aitchison and Greenacre (2002), in order to include in the display supplementary elements which are not used in the definition of the compositional biplot. Different types of supplementary elements are considered: supplementary parts of the composition, supplementary continuous variables external to the composition, supplementary categorical variables and supplementary observations. The projection of supplementary parts of the composition is done by means of the equivalence of clr and lr biplots. The other supplementary projections are done by classical methodology. An application example with a real geological data is included.

  12. Spring-forward in composite plate elements

    NARCIS (Netherlands)

    Wijskamp, Sebastiaan; Lamers, E.A.D.; Akkerman, Remko; Banabic, D.

    2005-01-01

    Spring-forward is a distortion of corner sections in continuous fibre reinforced composite products. The linear thermoelastic prediction for the spring-forward of single curved geometries is incorporated in a FE formulation for plate elements in order to simulate the spring-forward of doubly curved

  13. Spring-forward in composite plate elements

    NARCIS (Netherlands)

    Wijskamp, S.; Lamers, E.A.D.; Akkerman, R.

    2005-01-01

    Spring-forward is a distortion of corner sections in continuous fibre reinforced composite products. The linear thermoelastic prediction for the spring-forward of single curved geometries is incorporated in a FE formulation for plate elements in order to simulate the spring-forward of doubly curved

  14. Nuclear fuel elements having a composite cladding

    Science.gov (United States)

    Gordon, Gerald M.; Cowan, II, Robert L.; Davies, John H.

    1983-09-20

    An improved nuclear fuel element is disclosed for use in the core of nuclear reactors. The improved nuclear fuel element has a composite cladding of an outer portion forming a substrate having on the inside surface a metal layer selected from the group consisting of copper, nickel, iron and alloys of the foregoing with a gap between the composite cladding and the core of nuclear fuel. The nuclear fuel element comprises a container of the elongated composite cladding, a central core of a body of nuclear fuel material disposed in and partially filling the container and forming an internal cavity in the container, an enclosure integrally secured and sealed at each end of said container and a nuclear fuel material retaining means positioned in the cavity. The metal layer of the composite cladding prevents perforations or failures in the cladding substrate from stress corrosion cracking or from fuel pellet-cladding interaction or both. The substrate of the composite cladding is selected from conventional cladding materials and preferably is a zirconium alloy.

  15. Extraction of information from major element chemical analyses of lunar basalts

    Science.gov (United States)

    Butler, J. C.

    1985-01-01

    Major element chemical analyses often form the framework within which similarities and differences of analyzed specimens are noted and used to propose or devise models. When percentages are formed the ratios of pairs of components are preserved whereas many familiar statistical and geometrical descriptors are likely to exhibit major changes. This ratio preserving aspect forms the basis for a proposed framework. An analysis of compositional variability within the data set of 42 major element analyses of lunar reference samples was selected to investigate this proposal.

  16. Major Elements in Lake Muhazi, Rwanda, East Africa

    Institute of Scientific and Technical Information of China (English)

    Jean de la Paix MUPENZI; GE Jiwen; Gabriel HABIYAREMYE

    2009-01-01

    The aim of this study undertaken at Lake Muhazi in Rwanda was to determine and analyze the major elements present in water. The presence of many major elements (Al, As, Ba, C, Ca, Cu,Fe, H+, K, Mg, Mn, N, P, S, Si, and Zn) was determined by spectroscopic technique. The concentrations of the elements were measured in water samples taken from three different locations of the lake from May to August 2008. The lake is polluted by water flow from mountain sides surrounding the lake. Other causes of pollution could be the use of agrocbemicals in the sugar land, which surrounds the lake, and human activities near the lake. Finally, we proposed the strategies that can be applied in order to ensure good conservation of the environment and to prevent augmentation of heavy materials into the lake.

  17. Mobility of major and trace elements in the eclogite-fluid system and element fluxes upon slab dehydration

    Science.gov (United States)

    Tsay, Alexandra; Zajacz, Zoltan; Ulmer, Peter; Sanchez-Valle, Carmen

    2017-02-01

    The equilibrium between aqueous fluids and allanite-bearing eclogite has been investigated to constrain the effect of temperature (T) and fluid composition on the stability of allanite and on the mobility of major and trace elements during the dehydration of eclogites. The experiments were performed at 590-800 °C and 2.4-2.6 GPa, and fluids were sampled as synthetic fluid inclusions in quartz using an improved entrapment technique. The concentrations and bulk partition coefficients were determined for a range of major (Mg, Ca, Na, Fe, Al, Ti) and 16 trace elements as a function of T and fluid composition. The results reveal a significant effect of T on element partitioning between the fluids and the solid mineral assemblage. The partition coefficients increase by more than an order of magnitude for most of the major and trace elements, and several orders of magnitude for light rare-earth elements (LREE) from 590 to 800 °C. The addition of various ligand species into the fluid at 700 °C results in distinctive trends on element partitioning. The concentrations and corresponding partition coefficients of most of the elements are enhanced upon addition of NaF to the fluid. In contrast, NaCl displays a nearly opposite effect by suppressing the solubilities of major elements and consequently affecting the mobility of trace elements that form stable complexes with alkali-(alumino)-silicate clusters in the fluid, e.g. high field strength elements (HFSE). The results further suggest that fluids in equilibrium with orthopyroxene and/or diopsidic clinopyroxene are peralkaline (ASI ∼0.1-0.7), whereas fluids in equilibrium with omphacitic pyroxene are more peraluminous (ASI ∼1.15). Therefore, natural aqueous fluids in equilibrium with eclogite at about 90 km depth will be slightly peraluminous in composition. Another important finding of this study is the relatively high capacity of aqueous fluids to mobilize LREE, which may be even higher than that of hydrous melts.

  18. Comprehensive model for predicting elemental composition of coal pyrolysis products

    Energy Technology Data Exchange (ETDEWEB)

    Ricahrds, Andrew P. [Brigham Young Univ., Provo, UT (United States); Shutt, Tim [Brigham Young Univ., Provo, UT (United States); Fletcher, Thomas H. [Brigham Young Univ., Provo, UT (United States)

    2017-04-23

    Large-scale coal combustion simulations depend highly on the accuracy and utility of the physical submodels used to describe the various physical behaviors of the system. Coal combustion simulations depend on the particle physics to predict product compositions, temperatures, energy outputs, and other useful information. The focus of this paper is to improve the accuracy of devolatilization submodels, to be used in conjunction with other particle physics models. Many large simulations today rely on inaccurate assumptions about particle compositions, including that the volatiles that are released during pyrolysis are of the same elemental composition as the char particle. Another common assumption is that the char particle can be approximated by pure carbon. These assumptions will lead to inaccuracies in the overall simulation. There are many factors that influence pyrolysis product composition, including parent coal composition, pyrolysis conditions (including particle temperature history and heating rate), and others. All of these factors are incorporated into the correlations to predict the elemental composition of the major pyrolysis products, including coal tar, char, and light gases.

  19. Design of engineered cementitious composites for ductile seismic resistant elements

    Science.gov (United States)

    Kanda, Tetsushi

    This dissertation focuses on designing Engineered Cementitious Composite (ECC) to achieve high performance seismic resistant elements. To attain this goal, three major tasks have been accomplished. Task 1 aims at achieving new ECCs involving low cost fiber, which often involve fiber rupture in crack bridging, thus named as "Fiber Rupture Type ECC". Achieving the new ECC requires a new practical and comprehensive composite design theory. For this theory, single fiber behavior was first investigated. Specifically, fiber rupture in composite and chemical bond in fiber/matrix interface were experimentally examined and mathematically modeled. Then this model for single fiber behavior was implemented into a proposed bridging law, a theoretical model for relationship between fiber bridging stress of composite and Crack Opening Displacement (COD). This new bridging law was finally employed to establish a new composite design theory. Task 2 was initiated to facilitate structural interpretation of ECC's material behavior investigated in Task 1. For this purpose, uniaxial tensile behavior, one of the most important ECC's properties, was theoretically characterized with stress-strain relation from micromechanics view point. As a result, a theory is proposed to express ECC's tensile stress-strain relation in terms of micromechanics parameters of composites, such as bond strengths. Task 3 primarily demonstrates an integrated design scheme for ductile seismic elements that covers from micromechanics in single fiber level to structural design tool, such as with non-linear FEM analysis. The significance of this design scheme is that the influences of ECC's microstructure on element's structural performance is quantitatively captured. This means that a powerful tool is obtained for tailoring constitutive micromechanics parameters in order to maximize structural performance of elements. While the tool is still preliminary, completing this tool in future studies will enable one to

  20. Major element concentrations in Mangrove Pore Water, Sepetiba Bay, Brazil

    Directory of Open Access Journals (Sweden)

    Christian J. Sanders

    2012-03-01

    Full Text Available Concentrations of cations and anions of major elements (Na+, Ca2+, Mg2+, K+, Cl-, SO4 2- were analyzed in the pore water of a mangrove habitat. Site specific major element concentrations were identified along a four piezometric well transect, which were placed in distinct geobotanic facies. Evapotranspiration was evident in the apicum station, given the high salinity and major element concentrations. The station landward of an apicum was where major element/Cl- ratios standard deviations are greatest, suggesting intense in situ diagenesis. Molar ratios in the most continental station (4 are significantly lower than the nearby freshwater source, indicating a strong influence of sea water flux into the outer reaches of the mangrove ecosystem and encroaching on the Atlantic rain forest. Indeed, the SO4 2-/Cl- and Ca2+/Cl- ratios suggest limited SO4 2- reduction and relatively high Ca2+/Cl- ratios indicate a region of recent saltwater contact.As concentrações dos elementos maiores (Na+, Ca2+, Mg2+, K+, Cl-, SO4(2- foram analisadas na água intersticial de poços piezométricos localizados em diferentes fácies geobotânicas ao longo de um transecto num ecossistema de manguezal na Baía de Sepetiba - Rio de Janeiro. Maiores salinidades e concentrações dos íons maiores são evidencias de evapotranspiração no fácies apicum. Ainda no apicum foram observados os maiores desvios padrão da razão elemento/Cl− durante o período do estudo, indicando intensa diagênese in situ. Razões molares no piezômetro, localizado na borda do manguezal foram consideravelmente menores do que a fonte de água doce, indicando forte influência do fluxo de água marinha. Os resultados das razões molares, SO4(2-/Cl− e Ca2+/Cl− na borda do manguezal adjacente ao continente sugerem limitada redução de SO4(2- enquanto os valores relativamente altos na razão Ca2+/Cl− indicam contacto recente com água marinha.

  1. Quantitative elemental analysis of major, minor and trace elements in coal and host rocks by logging

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Fraser; Craig Smith [CSIRO Exploration & Mining (Australia)

    2008-12-15

    Knowledge of the distribution of major, minor and trace elements in coals and interburden materials is increasingly important. Technological developments now suggest that such elemental distributions may be determined using a downhole logging tool. This study was undertaken to achieve two goals. The first was to survey the industry to determine those elements of interest to the coal industry and their associated detection limits. The second was to use this information as one of the inputs to select the best technique for determining elemental abundances using a downhole logging tool in both production and exploration environments. A questionnaire was circulated widely and received a total of 15 responses. From these responses elements of interest were tabulated for reference to the Australian Coal Industry. Three technologies were evaluated as having potential to be incorporated into a downhole environment: X-Ray Fluorescence (XRF), Laser Induced Breakdown Spectroscopy (LIBS), and Prompt Gamma Neutron Activation Analysis (PGNAA) using a neutron generator. Various criteria were used to evaluate these techniques including operator and environmental safety, ease of implementation and operation, and performance with respect to the detection of the elements of interest to the coal industry. After due consideration, we recommend that the most practical way forward is the neutron activation (PGNAA and DGNAA) method using a neutron generator as the neutron source.

  2. An Experimental Study on Major Element Release from the Sediments in the Changjiang (Yangtze River) Estuary

    Institute of Scientific and Technical Information of China (English)

    GUO Yanwei; YANG Shouye

    2015-01-01

    With the enhanced warming and acidification of global ocean, whether and to what extent the naturally-weathered fluvial sediment into the sea can release elements and thus influence the geochemical process and ecosystem of global ocean remain to be resolved. In this contribution, an experimental study was carried out to examine the release rates of major elements (Ca, K, Mg and Al) from the surface sediments in the Changjiang (Yangtze River) Estuary under the pH values of 4.0, 6.0 and 7.0. The two studied sediments consist primarily of quartz, plagioclase, calcite and clay minerals, with the BET (Brunauer, Emmett and Teller) surface areas of 61.7m2g-1 and 23.1m2g-1. Major elements of Ca, K, Mg and Al show different release rates under different solution pH values. With the decreasing solution pH, the release rates of Ca and K increase obviously, while the release rates of Mg and Al increase with the initial solution pH varying from 6.0 to 7.0. The different release rates of these elements are closely related to the original mineral composition of the sediments and the reaction kinetics. Based on the experimental observation, quartz and clay minerals that have low dissolution rates may dominate the major element release to the aqueous phase. This study reveals that the en-hancing ocean acidification could cause considerable release of major elements from natural terrigenous sediments into the ambient marine environment, which has to be considered carefully in the future study on global change.

  3. Elemental composition at different points of the rainwater harvesting system.

    Science.gov (United States)

    Morrow, A C; Dunstan, R H; Coombes, P J

    2010-09-15

    Entry of contaminants, such as metals and non-metals, into rainwater harvesting systems can occur directly from rainfall with contributions from collection surfaces, accumulated debris and leachate from storage systems, pipes and taps. Ten rainwater harvesting systems on the east coast of Australia were selected for sampling of roof runoff, storage systems and tap outlets to investigate the variations in rainwater composition as it moved throughout the system, and to identify potential points of contribution to elemental loads. A total of 26 elements were screened at each site. Iron was the only element which was present in significantly higher concentrations in roof runoff samples compared with tank tap samples (Prainwater. Increased loads of copper were observed in hot tap samples supplied by the rainwater harvesting system via copper piping and a storage hot water system (Pcollected from a polyvinyl chloride pipe sampling point that does not supply household uses, compared with corresponding roof runoff samples (Pcollected rainwater between different study sites and between different sampling points. Atmospheric deposition was not a major contributor to the rainwater contaminant load at the sites tested. Piping materials, however, were shown to contribute significantly to the total elemental load at some locations.

  4. Major element, trace element, and Sr, Nd and Pb isotope studies of Cenozoic basalts from the South China Sea

    Institute of Scientific and Technical Information of China (English)

    YAN QuanShu; SHI XueFa; WANG KunShan; BU WenRui; XIAO Long

    2008-01-01

    The whole rock K-Ar ages of basalts from the South China Sea basin vary from 3.8 to 7.9 Ma, which suggest that intra-plate volcanism after the cessation of spreading of the South China Sea (SCS) is comparable to that in adjacent regions around the SCS, i.e., Leiqiong Peninsula, northern margin of the SCS, Indochina block, and so on. Based on detailed petrographic studies, we selected many fresh basaltic rocks and measured their major element, trace element, and Sr-Nd-Pb isotope compositions.Geochemical characteristics of major element and trace element show that these basaltic rocks belong to alkali basalt magma series, and are similar to OIB-type basalt. The extent of partial melting of mantle rock in source region is very low, and magma may experience crystallization differentiation and cumulation during the ascent to or storing in the high-level magma chamber. Sr-Nd-Pb isotopic data of these basaltic rocks imply an inhomogeneous mantle below the South China Sea. The nature of magma origin has a two end-member mixing model, one is EM2 (Enriched Mantle 2) which may be originated from mantle plume, the other is DMM (Depleted MORB Mantle). Pb isotopic characteristics show the Dupal anomaly in the South China Sea, and combined with newly found Dupal anomaly at Gakkel ridge in Arctic Ocean, this implies that Dupal anomaly is not only limited to South Hemisphere. In variation diagrams among Sr, Nd and Pb, the origin nature of mantle below the SCS is similar to those below Leiqiong peninsula, northern margin of the SCS and Indochina peninsula, and is different from those below north and northeast China. This study provides geochemical constraints on Hainan mantle plume.

  5. Trace Element Compositions of Pallasite Olivine Grains and Pallasite Origin

    Science.gov (United States)

    Mittlefehldt, David W.; Herrin, J. S.

    2010-01-01

    Pallasites are mixtures of metal with magnesian olivine. Most have similar metal compositions and olivine oxygen isotopic compositions; these are the main-group pallasites (PMG). The Eagle Station grouplet of pallasites (PES) have distinctive metal and olivine compositions and oxygen isotopic compositions. Pallasites are thought to have formed at the core-mantle boundary of their parent asteroids by mixing molten metal with solid olivine of either cumulatic or restitic origin. We have continued our investigation of pallasite olivines by doing in situ trace element analyses in order to further constrain their origin. We determined Al, P, Ca, Ga and first row transition element contents of olivine grains from suite of PMG and PES by LA-ICP-MS at JSC. Included in the PMG suite are some that have anomalous metal compositions (PMG-am) and atypically ferroan olivines (PMG-as). Our EMPA work has shown that there are unanticipated variations in olivine Fe/Mn, even within those PMG that have uni-form Fe/Mg. Manganese is homologous with Fe2+, and thus can be used the same way to investigate magmatic fractionation processes. It has an advantage for pallasite studies in that it is unaffected by redox exchange with the metal. PMG can be divided into three clusters on the basis of Mn/Mg; low, medium and high that can be thought of as less, typically and more fractionated in an igneous sense. The majority of PMG have medium Mn/Mg ratios. PMG-am occur in all three clusters; there does not seem to be any relationship between putative olivine igneous fractionation and metal composition. The PMG-as and one PMG-am make up the high Mn/Mg cluster; no PMG are in this cluster. The high Mn/Mg cluster ought to be the most fractionated (equivalent to the most Fe-rich in igneous suites), yet they have among the lowest contents of incompatible lithophile elements Al and Ti and the two PMG-as in this cluster also have low Ca and Sc contents. This is inconsistent with simple igneous

  6. Finite elements modeling of delaminations in composite laminates

    DEFF Research Database (Denmark)

    Gaiotti, m.; Rizzo, C.M.; Branner, Kim;

    2011-01-01

    The application of composite materials in many structures poses to engineers the problem to create reliable and relatively simple methods, able to estimate the strength of multilayer composite structures. Multilayer composites, like other laminated materials, suffer from layer separation, i.e., d...... by finite elements using different techniques. Results obtained with different finite element models are compared and discussed.......The application of composite materials in many structures poses to engineers the problem to create reliable and relatively simple methods, able to estimate the strength of multilayer composite structures. Multilayer composites, like other laminated materials, suffer from layer separation, i...... of the buckling strength of composite laminates containing delaminations. Namely, non-linear buckling and post-buckling analyses are carried out to predict the critical buckling load of elementary composite laminates affected by rectangular delaminations of different sizes and locations, which are modelled...

  7. 23 Elemental Composition of Suspended Particulate Matter ...

    African Journals Online (AJOL)

    `123456789jkl''''#

    coarse and fine particulate matter fractions at the higher height. The elements Cu, Zn, ... dense population, high density housing, the ..... could be in the vapor phase at the higher height. .... precipitation from a remote background site in. India.

  8. PROXIMATE AND ELEMENTAL COMPOSITION OF WHITE GRUBS

    African Journals Online (AJOL)

    DR. AMINU

    1.23% (protein, lipids, carbohydrates and ash) and (moisture content) 34.01 ± 1.00%. The lipid and protein ... advised. Keywords: White grubs, Proximate Analysis, Essential element, Nutrient .... of important enzyme reactions: the oxidation of.

  9. 20 Elemental Composition and Sources of Atmospheric Particulate ...

    African Journals Online (AJOL)

    `123456789jkl''''#

    Elemental Composition and Sources of Atmospheric Particulate Matter in Dar es Salaam,. Tanzania ... adverse health effects associated with ambient ... and is at about 1 km to the Indian Ocean. A ..... concentration ratio was around 2, which is.

  10. MASS CONCENTRATIONS AND ELEMENTAL COMPOSITION OF ...

    African Journals Online (AJOL)

    Preferred Customer

    concentration surpassed the WHO safe guideline value of 150 µg/m3 and 79 % of .... Kotebe Waste Water Treatment Plant site (KWWT) is located in the eastern part ... Each filter paper was oven dried, weighed and stored in desiccator before and ... and blank filter samples were analyzed for elements using standard method.

  11. Catalog of Mount St. Helens 2004 - 2005 Tephra Samples with Major- and Trace-Element Geochemistry

    Science.gov (United States)

    Rowe, Michael C.; Thornber, Carl R.; Gooding, Daniel J.; Pallister, John S.

    2008-01-01

    This open-file report presents a catalog of information about 135 ash samples along with geochemical analyses of bulk ash, glass and individual mineral grains from tephra deposited as a result of volcanic activity at Mount St. Helens, Washington, from October 1, 2004 until August 15, 2005. This data, in conjunction with that in a companion report on 2004?2007 Mount St. Helens dome samples by Thornber and others (2008a) are presented in support of the contents of the U.S. Geological Survey Professional Paper 1750 (Sherrod and others, ed., 2008). Readers are referred to appropriate chapters in USGS Professional Paper 1750 for detailed narratives of eruptive activity during this time period and for interpretations of sample characteristics and geochemical data presented here. All ash samples reported herein are currently archived at the David A. Johnston Cascades Volcano Observatory in Vancouver, Washington. The Mount St. Helens 2004?2005 Tephra Sample Catalogue along with bulk, glass and mineral geochemistry are tabulated in 6 worksheets of the accompanying Microsoft Excel file, of2008-1131.xls. Samples in all tables are organized by collection date. Table 1 is a detailed catalog of sample information for tephra deposited downwind of Mount St. Helens between October 1, 2004 and August 18, 2005. Table 2 provides major- and trace-element analyses of 8 bulk tephra samples collected throughout that interval. Major-element compositions of 82 groundmass glass fragments, 420 feldspar grains, and 213 mafic (clinopyroxene, amphibole, hypersthene, and olivine) mineral grains from 12 ash samples collected between October 1, 2004 and March 8, 2005 are presented in tables 3 through 5. In addition, trace-element abundances of 198 feldspars from 11 ash samples (same samples as major-element analyses) are provided in table 6. Additional mineral and bulk ash analyses from 2004 and 2005 ash samples are published in chapters 30 (oxide thermometry; Pallister and others, 2008), 32

  12. Neural network applied to elemental archaeological Marajoara ceramic compositions

    Energy Technology Data Exchange (ETDEWEB)

    Toyota, Rosimeiri G.; Munita, Casimiro S., E-mail: rosimeiritoy@yahoo.com.b, E-mail: camunita@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Boscarioli, Clodis, E-mail: boscarioli@gmail.co [Universidade Estadual do Oeste do Parana, Cascavel, PR (Brazil). Centro de Ciencias Exatas e Tecnologicas. Colegiado de Informatica; Hernandez, Emilio D.M., E-mail: boscarioli@gmail.co [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica; Neves, Eduardo G.; Demartini, Celia C., E-mail: eduardo@pq.cnpq.b [Museu de Arqueologia e Etnologia (MAE/USP), Sao Paulo, SP (Brazil)

    2009-07-01

    In the last decades several analytical techniques have been used in archaeological ceramics studies. However, instrumental neutron activation analysis, INAA, employing gamma-ray spectrometry seems to be the most suitable technique because it is a simple analytical method in its purely instrumental form. The purpose of this work was to determine the concentration of Ce, Co, Cr, Cs, Eu, Fe, Hf, K, La, Lu, Na, Nd, Rb, Sb, Sc, Sm, Ta, Tb, Th, U, Yb, and Zn in 160 original marajoara ceramic fragments by INAA. Marajoara ceramics culture was sophisticated and well developed. This culture reached its peak during the V and XIV centuries in Marajo Island located on the Amazon River delta area in Brazil. The purpose of the quantitative data was to identify compositionally homogeneous groups within the database. Having this in mind, the data set was first converted to base-10 logarithms to compensate for the differences in magnitude between major elements and trace elements, and also to yield a closer to normal distribution for several trace elements. After that, the data were analyzed using the Mahalanobis distance and using the lambda Wilks as critical value to identify the outliers. The similarities among the samples were studied by means of cluster analysis, principal components analysis and discriminant analysis. Additional confirmation of these groups was made by using elemental concentration bivariate plots. The results showed that there were two very well defined groups in the data set. In addition, the database was studied using artificial neural network with unsupervised learning strategy known as self-organizing maps to classify the marajoara ceramics. The experiments carried out showed that self-organizing maps artificial neural network is capable of discriminating ceramic fragments like multivariate statistical methods, and, again the results showed that the database was formed by two groups. (author)

  13. Mixed isoparametric finite element models of laminated composite shells

    Science.gov (United States)

    Noor, A. K.; Andersen, C. M.

    1977-01-01

    Mixed shear-flexible isoparametric elements are presented for the stress and free vibration analysis of laminated composite shallow shells. Both triangular and quadrilateral elements are considered. The 'generalized' element stiffness, consistent mass, and consistent load coefficients are obtained by using a modified form of the Hellinger-Reissner mixed variational principle. Group-theoretic techniques are used in conjunction with computerized symbolic integration to obtain analytic expressions for the stiffness, mass and load coefficients. A procedure is outlined for efficiently handling the resulting system of algebraic equations. The accuracy of the mixed isoparametric elements developed is demonstrated by means of numerical examples, and their advantages over commonly used displacement elements are discussed.

  14. DISTRIBUTION OF MAJOR ELEMENTS (Na, K, Ca, Mg) IN THE ...

    African Journals Online (AJOL)

    a

    the elements with all values falling within 1-10 showing that the degree of accumulation was intensive. ... ionized water added and filtered into 50 mL standard flask. ... Distribution of Na, K, Ca, Mg in Fadama crops in Ekiti State, Nigeria. Bull.

  15. Edxrf determination of major and minor elements in compound fertilizers

    DEFF Research Database (Denmark)

    Christensen, Leif Højslet; Rasmussen, Leif W.

    1985-01-01

    The combination of the energy-dispersive x-ray fluorescence technique and a backscatter/fundamental parameter-based matrix correction approach provides a new and unique solution to elemental analyses of fertilizers. This is demonstrated by means of results obtained for three reference materials...

  16. Major and trace elements in coal bottom ash at different oxy coal combustion conditions

    CSIR Research Space (South Africa)

    Oboirien, BO

    2014-09-01

    Full Text Available This paper presents a detailed study on the effect of temperature on the concentration of 27 major and trace elements in bottom ash generated from oxy fuel-combustion. The major elements are Na, Mg, Al, K, Ca and Fe and the minor and trace elements...

  17. Multivariate cluster analysis of some major and trace elements ...

    African Journals Online (AJOL)

    UFUOMA

    physical properties of texture and colour. Key words: ... Ca and trace elements Mn, Zn, Cu, Zr, Sr, Y, Pb, V, Cr,. Ga, Ni and Rb ... 5.0 g of each of the homogenized soil samples and adding 25.0ml of de-ionized .... 425 cm depth and decreases to 16.00 mg/kg at 500 cm. .... However, pH affects the dissolution, precipitation and.

  18. HTGR spent fuel composition and fuel element block flow

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, C.J.; Holder, N.D.; Pierce, V.H.; Robertson, M.W.

    1976-07-01

    The High-Temperature Gas-Cooled Reactor (HTGR) utilizes the thorium-uranium fuel cycle. Fully enriched uranium fissile material and thorium fertile material are used in the initial reactor core and for makeup fuel in the recycle core loadings. Bred /sup 233/U and unburned /sup 235/U fissile materials are recovered from spent fuel elements, refabricated into recycle fuel elements, and used as part of the recycle core loading along with the makeup fuel elements. A typical HTGR employs a 4-yr fuel cycle with approximately one-fourth of the core discharged and reloaded annually. The fuel element composition, including heavy metals, impurity nuclides, fission products, and activation products, has been calculated for discharged spent fuel elements and for reload fresh fuel and recycle fuel elements for each cycle over the life of a typical HTGR. Fuel element compositions are presented for the conditions of equilibrium recycle. Data describing compositions for individual reloads throughout the reactor life are available in a detailed volume upon request. Fuel element block flow data have been compiled based on a forecast HTGR market. Annual block flows are presented for each type of fuel element discharged from the reactors for reprocessing and for refabrication.

  19. Elemental composition of game meat from Austria.

    Science.gov (United States)

    Ertl, Kathrin; Kitzer, Roland; Goessler, Walter

    2016-06-01

    Concentrations of 26 elements (B, Na, Mg, P, S, K, Ca, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Rb, Sr, Mo, Cd, Sb, Ba, Hg, Pb, U) in wild game meat from Austria were analysed using an inductively coupled plasma mass spectrometer. All investigated animals were culled during the hunting season 2012/2013, including 10 chamois (Rupicapra rupicapra), 9 hare (Lepus europaeus), 10 pheasant (Phasianus colchicus), 10 red deer (Cervus elaphus), 12 roe deer (Capreolus capreolus) and 10 wild boar (Sus scrofa). In 19 out of 61 meat samples lead concentrations were higher than 0.1 mg/kg, the maximum limit in meat as set by the European Commission (Regulation EC No 1881/2006), which is most likely caused by ammunition residues. Especially, pellet shot animals and chamois show a high risk for lead contamination. Despite ammunition residues all investigated muscle samples show no further health risk with respect to metal contamination.

  20. Sampling and major element chemistry of the recent (A.D. 1631-1944) Vesuvius activity

    Science.gov (United States)

    Belkin, H.E.; Kilburn, C.R.J.; de Vivo, B.

    1993-01-01

    Detailed sampling of the Vesuvius lavas erupted in the period A.D. 1631-1944 provides a suite of samples for comprehensive chemical analyses and related studies. Major elements (Si, Ti, Al, Fetotal, Mn, Mg, Ca, Na, K and P), volatile species (Cl, F, S, H2O+, H2O- and CO2), and ferrous iron (Fe2+) were determined for one hundred and forty-nine lavas and five tephra from the A.D. 1631-1944 Vesuvius activity. The lavas represent a relatively homogeneous suite with respect to SiO2, TiO2, FeOtotal, MnO and P2O5, but show systematic variations among MgO, K2O, Na2O, Al2O3 and CaO. The average SiO2 content is 48.0 wt.% and the rocks are classified as tephriphonolites according to their content of alkalis. All of the lavas are silica-undersaturated and are nepheline, leucite, and olivine normative. There is no systematic variation in major-element composition with time, over the period A.D. 1631-1944. The inter-eruption and intra-eruption compositional differences are the same magnitude. The lavas are highly porphyritic with clinopyroxene and leucite as the major phases. Fractionation effects are not reflected in the silica content of the lavas. The variability of MgO, K2O, Na2O, and CaO can be modelled as a relative depletion or accumulation of clinopyroxene. ?? 1993.

  1. The Elemental Compositions of Extrasolar Planetesimals

    CERN Document Server

    Jura, M

    2013-01-01

    Evidence is now compelling that most externally-polluted white dwarfs derive their heavy atoms by accretion from asteroids - the building blocks of rocky planets. Optical and ultraviolet spectroscopy of a small sample of suitable white dwarf stars shows that to zeroth order, the accreted extrasolar parent bodies compositionally resemble bulk Earth. (1) Extrasolar planetesimals are at least 85% by mass composed of O, Mg, Si and Fe. (2) Compared to the Sun, C is often deficient, usually by at least a factor of 10 and therefore comprises less than 1% of an extrasolar planetesimal's mass. At least to-date, C has never been found to be enhanced as would be expected if carbon-rich planetesimals have formed. (3) While there may be individual exceptions, considered as a whole, the population of extrasolar asteroids accreted onto a well-defined sample of local white dwarf stars is less than 1% water by mass.

  2. Finite element based micro-mechanics modeling of textile composites

    Science.gov (United States)

    Glaessgen, E. H.; Griffin, O. H., Jr.

    1995-01-01

    Textile composites have the advantage over laminated composites of a significantly greater damage tolerance and resistance to delamination. Currently, a disadvantage of textile composites is the inability to examine the details of the internal response of these materials under load. Traditional approaches to the study fo textile based composite materials neglect many of the geometric details that affect the performance of the material. The present three dimensional analysis, based on the representative volume element (RVE) of a plain weave, allows prediction of the internal details of displacement, strain, stress, and failure quantities. Through this analysis, the effect of geometric and material parameters on the aforementioned quantities are studied.

  3. How do olivines record magmatic events? Insights from major and trace element zoning

    Science.gov (United States)

    de Maisonneuve, C. Bouvet; Costa, F.; Huber, C.; Vonlanthen, P.; Bachmann, O.; Dungan, M. A.

    2016-06-01

    Reconciling the diverse records of magmatic events preserved by multiple crystals and minerals in the same sample is often challenging. In the case of basaltic-andesites from Volcán Llaima (Chile), Mg zoning in olivine is always simpler than Ca zoning in plagioclase. A model that explains a number of chemical patterns is that Llaima magmas stall in the upper crust, where they undergo decompression crystallization and form crystal-mush bodies. Frequent magma inputs from deeper reservoirs provide the potential for remobilization and eruption. The records of multiple recharge events in Llaima plagioclase versus an apparent maximum of one such event in coexisting olivine are addressed by using trace element zoning in olivine phenocrysts. We have integrated elements that (1) respond to changes in magma composition due to recharge or mixing (Mg, Fe, Ni, Mn, ±Ca), with (2) elements that are incorporated during rapid, disequilibrium crystal growth (P, Ti, Sc, V, Al). A more complex history is obtained when these elements are evaluated considering their partition coefficients, diffusivities, and crystal growth rates. The olivine archive can then be reconciled with the plagioclase archive of magma reservoir processes. Olivine (and plagioclase) phenocrysts may experience up to three or more recharge events between nucleation and eruption. Diffusion modeling of major and trace element zoning in two dimensions using a new lattice Boltzmann model suggests that recharge events occur on the order of months to a couple of years prior to eruption, whereas crystal residence times are more likely to be on the order of a few years to decades.

  4. Determination of 11 major and minor elements in chondritic meteorites by inductively coupled plasma mass spectrometry.

    Science.gov (United States)

    Wolf, Stephen F; Compton, Joseph R; Gagnon, Christopher J L

    2012-10-15

    We have developed a new method for the quantification of 11 major and minor elements (Na, Mg, Al, P, S, K, Ca, Cr, Mn, Fe, and Ni) in chondritic meteorites by ICPMS using external calibration with a matrix-matched standard prepared from the Allende Standard Reference Meteorite. We have demonstrated the method's accuracy and assessed three different measures of precision by performing replicate dissolutions and analyses of 0.10-g samples of a homogenized samples of the CM2 meteorite Murchison and compared our results to literature values. We subsequently applied this method to the analysis of a set of four chondritic meteorites possessing a relatively wide range of chondritic compositions with results in accord with previously published values. Because our method is designed to use the same instrumentation and can use samples and standards prepared according to methods previously validated for the determination of a comprehensive suite of minor, trace, moderately and highly volatile trace elements (i.e., Li, Sc, Ti, V, Mn, Co, Cu, Zn, Ga, As, Se, Rb, Sr, Y, Zr, Nb, Mo, Ru, Pd, Ag, Cd, In, Sn, Sb, Te, Cs, Ba, all 14 naturally occurring lanthanoids, Hf, W, Re, Ir, Pt, Tl, Bi, Th, and U) it complements these methods and allows a single laboratory to determine the concentrations of 60 elements in semimicroscopic amounts of chondritic material. Copyright © 2012 Elsevier B.V. All rights reserved.

  5. FINITE ELEMENT IMPLEMENTATION OF DELAMINATION IN COMPOSITE PLATES

    Directory of Open Access Journals (Sweden)

    Milan Žmindák

    2012-12-01

    Full Text Available Modelling of composite structures by finite element (FE codes to effectively model certain critical failure modes such as delamination is limited. Previous efforts to model delamination and debonding failure modes using FE codes have typically relied on ad hoc failure criteria and quasi-static fracture data. Improvements to these modelling procedures can be made by using an approach based on fracture mechanics. A study of modelling delamination using the finite element code ANSYS was conducted. This investigation demonstrates the modelling of composites through improved delamination modelling. Further developments to this approach may be improved.

  6. Elemental composition of extant microbialites: mineral and microbial carbon

    Science.gov (United States)

    Valdespino-Castillo, P. M.; Falcón, L. I.; Holman, H. Y. N.; Merino-Ibarra, M.; García-Guzmán, M.; López-Gómez, L. M. D. R.; Martínez, J.; Alcantara-Hernandez, R. J.; Beltran, Y.; Centeno, C.; Cerqueda-Garcia, D.; Pi-Puig, T.; Castillo, F. S.

    2015-12-01

    Microbialites are the modern analogues of ancient microbial consortia. Their existence extends from the Archaean (~3500 mya) until present and their lithified structure evidences the capacity of microbial communities to mediate mineral precipitation. Living microbialites are a useful study model to test the mechanisms involved in carbonates and other minerals precipitation. Here, we studied the chemical composition, the biomass and the microbial structure of extant microbialites. All of these were found in Mexico, in water systems of different and characteristic ionic firms. An elemental analysis (C:N) of microbial biomass was performed and total P was determined. To explore the chemical composition of microbialites as a whole, X-ray diffraction analyses were performed over dry microbialites. While overall inorganic carbon content (carbonates) represented >70% of the living layer, a protocol of inorganic carbon elimination was performed for each sample resulting in organic matter contents between 8 and 16% among microbialites. Stoichiometric ratios of C:N:P in microbialite biomass were different among samples, and the possibility of P limitation was suggested mainly for karstic microbialites, N limitation was suggested for all samples and, more intensively, for soda system microbialites. A differential capacity for biomass allocation among microbialites was observed. Microbialites showed, along the biogeographic gradient, a diverse arrangement of microbial assemblages within the mineral matrix. While environmental factors such as pH and nitrate concentration were the factors that defined the general structure and diversity of these assemblages, we intend to test if the abundance of major ions and trace metals are also defining microbialite characteristics (such as microbial structure and biomass). This work contributes to define a baseline of the chemical nature of extant microbial consortia actively participating in mineral precipitation processes.

  7. Identification and Selection of Major Carbon Dioxide Stream Compositions

    Energy Technology Data Exchange (ETDEWEB)

    Last, George V.; Schmick, Mary T.

    2011-06-30

    A critical component in the assessment of long-term risk from geologic sequestration of CO2 is the ability to predict mineralogical and geochemical changes within storage reservoirs due to rock-brine-CO2 reactions. Impurities and/or other constituents selected for co-sequestration can affect both the chemical and physical (e.g. density, viscosity, interfacial tension) behavior of CO2 in the deep subsurface. These impurities and concentrations are a function of both the industrial source(s) of the CO2, as well as the carbon capture technology used to extract the CO2 and produce a concentrated stream for geologic sequestration. This report summarizes the relative concentrations of CO2 and other constituents in exhaust gases from major non-energy related industrial sources of CO2. Assuming that carbon-capture technology would remove most of the incondensable gases N2, O2, and Ar, leaving SO2 and NOx as the main impurities, we selected four test fluid compositions for use in geochemical experiments. These included: 1) a pure CO2 stream representative of food grade CO2 used in most enhanced oil recovery projects: 2) a test fluid composition containing low concentrations (0.5 mole %) SO2 and NOx (representative of that generated from cement production), 3) a test fluid composition with higher concentrations (2.5 mole %) of SO2, and 4) and test fluid composition containing 3 mole % H2S.

  8. Major elements distribution during liquefaction of beneficated coal fractions from hydrocyclone and flotation

    Energy Technology Data Exchange (ETDEWEB)

    Barraza, J. [Universitaria Melendez (Colombia). Dept. de Procesos Quimicos; Cloke, M.; Belghazi, A. [Nottingham Univ. (United Kingdom). Dept. of Chemical Engineering

    1997-12-31

    Beneficiated coal fractions obtained by hydrocyclone and column flotation separation were liquefied in order to determine their effect on the reduction of the major element content in the coal extract liquid prior to hydroprocessing. Results showed that some major elements, mainly Ca, Mn and Ti, were reduced using these beneficiated coal fractions. In general, all the elements exhibit higher reduction using overflow from the cyclone separation compared to the concentrate from the column flotation. (orig.)

  9. Boron and strontium isotope ratios and major/trace elements concentrations in tea leaves at four major tea growing gardens in Taiwan.

    Science.gov (United States)

    Chang, Cheng-Ta; You, Chen-Feng; Aggarwal, Suresh Kumar; Chung, Chuan-Hsiung; Chao, Hung-Chun; Liu, Hou-Chun

    2016-06-01

    Isotopic compositions of B and Sr in rocks and sediments can be used as tracers for plant provincial sources. This study aims to test whether tea leaf origin can be discriminated using (10)B/(11)B and Sr isotopic composition data, along with concentrations of major/trace elements, in tea specimens collected from major plantation gardens in Taiwan. The tea leaves were digested by microwave and analyzed by multi-collector inductively coupled plasma mass spectrometry (MC-ICPMS). The data showed significant variations in (87)Sr/(86)Sr ratios (from 0.70482 to 0.71462), which reflect changes in soil, groundwater or irrigation conditions. The most radiogenic tea leaves were found at the Taitung garden and the least radiogenic ones were from the Hualien garden. The δ (11)B was found to change appreciably (δ (11)B = 0.38-23.73 ‰) which could be due to fertilizers. The maximum δ (11)B was also observed in tea samples from the Hualien garden. Principal component analysis combining (87)Sr/(86)Sr, δ (11)B and major/trace elements results successfully discriminated different sources of major tea gardens in Taiwan, except the Hualien gardens, and this may be due to rather complicated local geological settings.

  10. Elemental composition of Tibetan Plateau top soils and its effect on evaluating atmospheric pollution transport

    Energy Technology Data Exchange (ETDEWEB)

    Li Chaoliu [Institute of Tibetan Plateau Research, CAS, 18 Shuangqin Rd., Haidian District, Beijing 100085 (China); Kang Shichang, E-mail: shichang.kang@itpcas.ac.c [Institute of Tibetan Plateau Research, CAS, 18 Shuangqin Rd., Haidian District, Beijing 100085 (China); State Key Laboratory of Cryospheric Sciences, CAS, Lanzhou 730000 (China); Zhang Qianggong [Institute of Tibetan Plateau Research, CAS, 18 Shuangqin Rd., Haidian District, Beijing 100085 (China); Graduate School of Chinese Academy of Sciences, Beijing 100039 (China)

    2009-08-15

    The Tibetan Plateau (TP) is an ideal place for monitoring the atmospheric environment of low to mid latitudes. In total 54 soil samples from the western TP were analyzed for major and trace elements. Results indicate that concentrations of some typical 'pollution' elements (such as As) are naturally high here, which may cause incorrect evaluation for the source region of these elements, especially when upper continental crust values are used to calculate enrichment factors. Because only particles <20 mum are transportable as long distances, elemental concentrations of this fraction of the TP soils are more reliable for the future aerosol related studies over the TP. In addition, REE compositions of the TP soils are unusual, highly characteristic and can be used as an effective index for identifying dust aerosol from the TP. - High concentrations of some elements of the Tibetan soils can cause incorrect evaluation for the source region of these elements during aerosol related study.

  11. Finite Element Analysis of a Natural Fiber (Maize Composite Beam

    Directory of Open Access Journals (Sweden)

    D. Saravana Bavan

    2013-01-01

    Full Text Available Natural fiber composites are termed as biocomposites or green composites. These fibers are green, biodegradable, and recyclable and have good properties such as low density and low cost when compared to synthetic fibers. The present work is investigated on the finite element analysis of the natural fiber (maize composite beam, processed by means of hand lay-up method. Composite beam material is composed of stalk-based fiber of maize and unsaturated polyester resin polymer as matrix with methyl ethyl ketone peroxide (MEKP as a catalyst and Cobalt Octoate as a promoter. The material was modeled and resembled as a structural beam using suitable assumption and analyzed by means of finite element method using ANSYS software for determining the deflection and stress properties. Morphological analysis and X-ray diffraction (XRD analysis for the fiber were examined by means of scanning electron microscope (SEM and X-ray diffractometer. From the results, it has been found that the finite element values are acceptable with proper assumptions, and the prepared natural fiber composite beam material can be used for structural engineering applications.

  12. Finite element modeling of consolidation of composite laminates

    Institute of Scientific and Technical Information of China (English)

    Xiangqiao Yan

    2006-01-01

    Advanced fiber reinforced polymer composites have been increasingly applied to various structural corn-ponents.One of the important processes to fabricate high performance laminated composites is an autoclave assisted prepreg lay-up.Since the quality of laminated composites is largely affected by the cure cycle,selection of an appropriate cure cycle for each application is important and must be opti-mized.Thus.some fundamental model of the consolidation and cure processes is necessary for selecting suitable param-eters for a specific application.This article is concerned with the "flow-compaction" model during the autoclave process-ing of composite materials.By using a weighted residual method,two-dimensional finite element formulation for the consolidation process of thick thermosetting composites is presented and the corresponding finite element code is developed.Numerical examples.including comparison of the present numerical results with one-dimensional and two-dimensional analytical solutions,are given to illustrate the accuracy and effectiveness of the proposed finite element formulation.In addition,a consolidation simulation of As4/3501-6 graphite/epoxy laminate is carried out and compared with the experimental results available in the literature.

  13. Three-Dimensional Effects in the Plate Element Analysis of Stitched Textile Composites

    Science.gov (United States)

    Glaessgen, E. H.; Raju, I. S.

    2000-01-01

    Three-dimensional effects related to the analysis of stitched textile composites are discussed. The method of calculation is based on the virtual crack closure technique (VCCT), and models that model the upper and lower surface of the delamination or debond with two-dimensional (2D) plate elements rather than three-dimensional (3D) solid elements. The major advantages of the plate element modeling technique are a smaller model size and simpler geometric modeling. Details of the modeling of the laminated plate and the stitching are discussed.

  14. Light and heavy element isotopic compositions of mainstream SiC grains.

    Energy Technology Data Exchange (ETDEWEB)

    Amari, S.; Clayton, R. N.; Davis, A. M.; Lewis, R. S.; Pellin, M. J.

    1999-02-03

    Although a variety of types of pre-solar SiC grains have been classified by their C, N, and Si isotopic composition, the majority of such grains are so-called mainstream grains and are believed to have come from asymptotic giant branch stars [1]. We have previously reported the Mo isotopic compositions of presolar SiC grains whose C, N, and Si isotopic compositions were not known [2]. Since most presolar SiC grains fall in the mainstream group, we assumed that these grains were mainstream. The excellent match of the Mo isotopic data with expectations for nucleosynthesis in AGB stars was consistent with this identification. In order to better understand the distribution of isotopic compositions in presolar grains, we have begun to measure heavy element isotopic compositions of presolar SiC grains of known C, N and Si isotopic composition.

  15. Galerkin finite element scheme for magnetostrictive structures and composites

    Science.gov (United States)

    Kannan, Kidambi Srinivasan

    The ever increasing-role of magnetostrictives in actuation and sensing applications is an indication of their importance in the emerging field of smart structures technology. As newer, and more complex, applications are developed, there is a growing need for a reliable computational tool that can effectively address the magneto-mechanical interactions and other nonlinearities in these materials and in structures incorporating them. This thesis presents a continuum level quasi-static, three-dimensional finite element computational scheme for modeling the nonlinear behavior of bulk magnetostrictive materials and particulate magnetostrictive composites. Models for magnetostriction must deal with two sources of nonlinearities-nonlinear body forces/moments in equilibrium equations governing magneto-mechanical interactions in deformable and magnetized bodies; and nonlinear coupled magneto-mechanical constitutive models for the material of interest. In the present work, classical differential formulations for nonlinear magneto-mechanical interactions are recast in integral form using the weighted-residual method. A discretized finite element form is obtained by applying the Galerkin technique. The finite element formulation is based upon three dimensional eight-noded (isoparametric) brick element interpolation functions and magnetostatic infinite elements at the boundary. Two alternative possibilities are explored for establishing the nonlinear incremental constitutive model-characterization in terms of magnetic field or in terms of magnetization. The former methodology is the one most commonly used in the literature. In this work, a detailed comparative study of both methodologies is carried out. The computational scheme is validated, qualitatively and quantitatively, against experimental measurements published in the literature on structures incorporating the magnetostrictive material Terfenol-D. The influence of nonlinear body forces and body moments of magnetic origin

  16. Factors influencing trace element composition in human teeth

    Energy Technology Data Exchange (ETDEWEB)

    Tandon, L. [Los Alamos National Lab., NM (United States); Iyengar, G.V. [Biomineral Sciences International, Inc., Bethesda, MD (United States)

    1997-12-01

    The authors recently compiled and reviewed the literature published in or after 1978 for 45 major, minor, and trace elements in human teeth as a part of an International Atomic Energy Agency (IAEA) study. The purpose of this paper is to discuss the various factors that influence the concentration levels of certain trace elements in human teeth. The sampling practices and analytical techniques that are applicable for trace element analysis are also discussed. It is also our intention to identify reference range of values, where data permit such conclusions. The scrutiny was designed to identify only the healthy permanent teeth, and values from teeth with fillings, caries, or periodontal diseases were eliminated.

  17. The distributions of colloidal and dissolved organic carbon, major elements, and trace elements in small tropical catchments

    Science.gov (United States)

    Eyrolle, F.; Benedetti, M. F.; Benaim, J. Y.; Février, D.

    1996-10-01

    In tropical surface waters, ultrafiltration, differential pulse anodic stripping voltametry, and atomic absorption spectrometry were used to determine the distribution and association of major and trace elements with different size fractions of dissolved organic carbon (DOC Complexation capacities are in the range of 1-11 μM in bulk solution. In podzolization areas the higher molecular weight fractions control the speciation of Ca, Mg, and Fe. In the other tropical environments major elements are present as free ions and the low molecular weight fraction of DOC controls the speciation of trace metals (Cu).

  18. Body Composition in Adult Patients with Thalassemia Major

    Directory of Open Access Journals (Sweden)

    Marianna Vlychou

    2016-01-01

    Full Text Available Objective. To assess body composition in adult male and female patients with thalassemia major by dual-energy X-ray absorptiometry (DXA and to compare the findings with a group of healthy age-matched controls. Methods. Our study group included sixty-two patients (27 males, mean age 36 years, and 35 females, mean age 36.4 years and fifteen age-matched healthy controls. All patients had an established diagnosis of thalassemia major and followed a regular blood transfusion scheme since childhood and chelation treatment. Fat, lean, and bone mineral density (BMD were assessed with dual-energy X-ray absorptiometry. Ferritin levels and body mass index of all patients and controls were also recorded. Student t-test and Wilcoxon test were performed and statistical significance was set at p<0.05. Results. BMD and whole body lean mass are lower in both male and female adult patients compared with controls (p<0.01 in both groups, whereas whole body fat mass was found to have no statistically significant difference compared to controls. Regional trunk fat around the abdomen was found to be lower in male patients compared to controls (p=0.02. Conclusion. Severe bone loss and diminished lean mass are expected in adult male and female patients with thalassemia major. Fat changes seem to affect mainly male patients.

  19. Major Elements Geochemistry of the Breiner Baiut Ore Deposit (Gutai Mountains, Eastern Carpathians

    Directory of Open Access Journals (Sweden)

    Dan Costin

    2000-04-01

    Full Text Available The Breiner Băiuţ epithermal vein – type deposit is basically a base metal ore body with important amounts of gold and silver. The frequency distribution pattern of the major elements (Au, Ag, Pb, Zn, Cu, S is complex in many cases, but at some mining levels it is lognormal. The correlation coefficient "r" has been calculated for six pairs of major elements. The values are positive and indicate strong correlations between these elements. The average grades values for each major element at all levels have been used to highlight the vertical variation of chemistry of the mineralization. The ore body consists of zones rich in different elements interlayered with poorly mineralized zones.

  20. Correlation of archaeological ceramics and clays using an external-beam PIXE analysis of the major elemental constituents

    Science.gov (United States)

    Ryan, S. R.; Fischbeck, H. J.; Chesnut, K.

    1985-05-01

    Time-consuming trace-element analysis is often used to determine the origin of archaeological artifacts. In an effort to locate the source of clay used to manufacture archaeological ceramics from eastern Oklahoma, we find that a determination of major elemental constituents using external-beam PIXE analysis is a useful technique for determining the probability of common origin. Using a 7 nA, 1.5 MeV external proton beam, it takes less than one minute to determine the concentration of the major elements to an accuracy of better than 5%. This rapid analysis makes it possible to quickly select pottery sherds of similar composition and eliminate clay samples which are not strongly correlated with the sherds. Trace-element analysis of these strongly correlated samples can then in principle be used to make an absolute identification. Major elemental analysis is thus useful for survey work where many samples must be examined. The effects of sample inhomogeneity and the firing process, as well as the probability of false correlations, are discussed.

  1. 论非英语专业学生翻译能力的提高--基于PACTE翻译能力构成模式中的心理要素的研究%On the Improvement of Non-English Majors' Translation Competence:Research on the Psychological Elements in PACTE Translation Competence Composition Pattern

    Institute of Scientific and Technical Information of China (English)

    丁宁

    2014-01-01

    作为非专业英语教学培养的五种能力(听说读写译)中最难也是最高层次的技能,非英语专业大学生的翻译能力正越来越受到重视。而解决非英语专业学生翻译能力提高的问题也成了大学英语教学中一项艰巨而又棘手的任务。本文将以PACTE翻译能力构成模式为基础,从心理要素出发,分析影响非英语专业学生翻译能力提高的原因,有针对性地提出相应的解决策略,以帮助非英语专业学生突破瓶颈,提高翻译能力。%As the most difficult and the highest-level one among the five skills (listening, speaking, reading, writing, and translat-ing) cultivated in non-professional English teaching, the transla-tion competence of non-English college students is given more and more attention, and the improvement of their translation competence has become an arduous and intractable task. Based on PACTE translation competence composition pattern, this pa-per, starting from the psychological elements, will analyze the factors affecting the improvement of non-English majors' transla-tion competence, and pertinently propose corresponding solu-tions, in order to help non-English majors break the bottleneck and improve their translation competence.

  2. Statistical Study of Trace Elemental Concentrations in Major Types of Organisms from Typical Chinese Coastal Waters

    Institute of Scientific and Technical Information of China (English)

    郭卫东; 胡明辉; 石谦; 杨逸萍

    2004-01-01

    Frequency distribution characteristics of trace elements Fe, Mn, Zn, Cu. Sr and Ba are studied for the marine organisms collected from typical Chinese coastal waters and compared with those of major elements Ca and Mg. Nearly all the distributions for trace elements in macroalgae, benthic molluscs, crustaceans, cephalopods and different tissues of fish ( muscle, liver and bone ) are found to show some degree of positive skewness, indicating a relatively large number of marine organisms with low concentrations for a particular element and only a few organisms with disproportionately high concentrations. Their distribution types are generally logarithmic normal distribution or nearly logarithmic normal distribution. Distribution of Ca is similar to that of trace elements, while Mg shows normal distribution. Average elemental concentrations of major types of organisms are calculated based on their frequency distributions.

  3. Characterization of Multiple Delaminated Composite by Finite Element

    Directory of Open Access Journals (Sweden)

    SUDIP DEY

    2011-09-01

    Full Text Available In this paper, a finite element method is employed to investigate the natural frequencies of twisted rotating composite turbine blades subject to multiple delamination. The turbine blade is idealized as a shallow conical shell model with low aspect ratio. The formulation is based on Mindlin’s theory, QR iteration and multi-point constraint algorithm for moderate rotational speeds neglecting Coriolis effect. Computer codes are developed and the numerical results obtained for multiple delaminated graphite-epoxy cross-ply composite shallow conical shells are the first known non-dimensional frequencies for the type of analyses carried out here.

  4. Cluster analysis on the bulk elemental compositions of Antarctic stony meteorites

    Science.gov (United States)

    Miyamoto, Hideaki; Niihara, Takafumi; Kuritani, Takeshi; Hong, Peng K.; Dohm, James M.; Sugita, Seiji

    2016-05-01

    Remote sensing observations by recent successful missions to small bodies have revealed the difficulty in classifying the materials which cover their surfaces into a conventional classification of meteorites. Although reflectance spectroscopy is a powerful tool for this purpose, it is influenced by many factors, such as space weathering, lighting conditions, and surface physical conditions (e.g., particle size and style of mixing). Thus, complementary information, such as elemental compositions, which can be obtained by X-ray fluorescence (XRF) and gamma-ray spectrometers (GRS), have been considered very important. However, classifying planetary materials solely based on elemental compositions has not been investigated extensively. In this study, we perform principal component and cluster analyses on 12 major and minor elements of the bulk compositions of 500 meteorites reported in the National Institute of Polar Research (NIPR), Japan database. Our unique approach, which includes using hierarchical cluster analysis, indicates that meteorites can be classified into about 10 groups purely by their bulk elemental compositions. We suggest that Si, Fe, Mg, Ca, and Na are the optimal set of elements, as this set has been used successfully to classify meteorites of the NIPR database with more than 94% accuracy. Principal components analysis indicates that elemental compositions of meteorites form eight clusters in the three-dimensional space of the components. The three major principal components (PC1, PC2, and PC3) are interpreted as (1) degree of differentiations of the source body (i.e., primitive versus differentiated), (2) degree of thermal effects, and (3) degree of chemical fractionation, respectively.

  5. PETROS - Worldwide Databank of Major Element Chemical Analyses of Igneous Rocks

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — PETROS is a worldwide data bank of major element chemical analyses of igneous rocks compiled for research and teaching purposes by Dr. Felix Mutschler and Staff at...

  6. Altered fecal microbiota composition in patients with major depressive disorder.

    Science.gov (United States)

    Jiang, Haiyin; Ling, Zongxin; Zhang, Yonghua; Mao, Hongjin; Ma, Zhanping; Yin, Yan; Wang, Weihong; Tang, Wenxin; Tan, Zhonglin; Shi, Jianfei; Li, Lanjuan; Ruan, Bing

    2015-08-01

    Studies using animal models have shown that depression affects the stability of the microbiota, but the actual structure and composition in patients with major depressive disorder (MDD) are not well understood. Here, we analyzed fecal samples from 46 patients with depression (29 active-MDD and 17 responded-MDD) and 30 healthy controls (HCs). High-throughput pyrosequencing showed that, according to the Shannon index, increased fecal bacterial α-diversity was found in the active-MDD (A-MDD) vs. the HC group but not in the responded-MDD (R-MDD) vs. the HC group. Bacteroidetes, Proteobacteria, and Actinobacteria strongly increased in level, whereas that of Firmicutes was significantly reduced in the A-MDD and R-MDD groups compared with the HC group. Despite profound interindividual variability, levels of several predominant genera were significantly different between the MDD and HC groups. Most notably, the MDD groups had increased levels of Enterobacteriaceae and Alistipes but reduced levels of Faecalibacterium. A negative correlation was observed between Faecalibacterium and the severity of depressive symptoms. These findings enable a better understanding of changes in the fecal microbiota composition in such patients, showing either a predominance of some potentially harmful bacterial groups or a reduction in beneficial bacterial genera. Further studies are warranted to elucidate the temporal and causal relationships between gut microbiota and depression and to evaluate the suitability of the microbiome as a biomarker.

  7. Primordial heavy elements in composite dark matter models

    CERN Document Server

    Khlopov, M Yu

    2008-01-01

    A widely accepted viewpoint is to consider candidates for cosmological dark matter as neutral and weakly interacting particles, as well as to consider only light elements in the pregalactic chemical composition. It is shown that stable charged leptons and quarks can exist and, hidden in elusive atoms, play the role of dark matter. The inevitable consequence of realistic scenarios with such composite atom-like dark matter is existence of significant or even dominant fraction of "atoms", binding heavy -2 charged particles and He-4 nuclei. Being alpha-particles with shielded electric charge, such atoms catalyse a new path of nuclear transformations in the period of Big Bang Nucleosynthesis, which result in primordial heavy elements. The arguments are given, why such scenario escapes immediate contradiction with observations and challenges search for heavy stable charged particles in cosmic rays and at accelerators.

  8. Better Finite-Element Analysis of Composite Shell Structures

    Science.gov (United States)

    Clarke, Gregory

    2007-01-01

    A computer program implements a finite-element-based method of predicting the deformations of thin aerospace structures made of isotropic materials or anisotropic fiber-reinforced composite materials. The technique and corresponding software are applicable to thin shell structures in general and are particularly useful for analysis of thin beamlike members having open cross-sections (e.g. I-beams and C-channels) in which significant warping can occur.

  9. Compositional data analysis for elemental data in forensic science.

    Science.gov (United States)

    Campbell, Gareth P; Curran, James M; Miskelly, Gordon M; Coulson, Sally; Yaxley, Gregory M; Grunsky, Eric C; Cox, Simon C

    2009-07-01

    Discrimination of material based on elemental composition was achieved within a compositional data (CoDa) analysis framework in a form appropriate for use in forensic science. The methods were carried out on example data from New Zealand nephrite. We have achieved good separation of the in situ outcrops of nephrite from within a well-defined area. The most significant achievement of working within the CoDa analysis framework is that the implications of the constraints on the data are acknowledged and dealt with, not ignored. The full composition was reduced based on collinearity of elements, principal components analysis (PCA) and scalings from a backwards linear discriminant analysis (LDA). Thus, a descriptive subcomposition was used for the final discrimination, using LDA, and proved to be more successful than using the full composition. The classification based on the LDA model showed a mean error rate of 2.9% when validated using a 10 repeat, three-fold cross-validation. The methods presented lend objectivity to the process of interpretation, rather than relying on subjective pattern matching type approaches.

  10. Major and trace element distribution in soil and sediments from the Egyptian central Nile Valley

    Science.gov (United States)

    Badawy, W. M.; Ghanim, E. H.; Duliu, O. G.; El Samman, H.; Frontasyeva, M. V.

    2017-07-01

    The distributions of 32 major and trace elements in 72 surface soil and sediment samples collected from the Asyut to Cairo Nile river section were determined by epithermal neutron activation analysis and compared with corresponding data for the Upper Continental Crust, North American Shale Composite, Average Soil and Average Sediment as well as suspended sediments from Congo and Upper Niger Rivers, in order to establish to which extent the Nile sedimentary material can be related to similar material all over the world as well as to local geology. Their relative distributions indicate the presence of detrital material of igneous origin, most probably resulting from weathering of the Ethiopian Highlands and transported by the Blue Nile, the Nile main tributary. The distributions of nickel, zinc, and arsenic contents suggest that the lower part of the Nile and its surroundings including the Nile Delta is not seriously polluted with heavy metals, so that, in spite of a human activity, which lasted four millennia, the Nile River continues to be less affected by any anthropogenic contamination.

  11. The elemental composition of the Sun I. The intermediate mass elements Na to Ca

    CERN Document Server

    Scott, Pat; Asplund, Martin; Sauval, A Jacques; Lind, Karin; Takeda, Yoichi; Collet, Remo; Trampedach, Regner; Hayek, Wolfgang

    2014-01-01

    The composition of the Sun is an essential piece of reference data for astronomy, cosmology, astroparticle, space and geo-physics. This article, dealing with the intermediate-mass elements Na to Ca, is the first in a series describing the comprehensive re-determination of the solar composition. In this series we severely scrutinise all ingredients of the analysis across all elements, to obtain the most accurate, homogeneous and reliable results possible. We employ a highly realistic 3D hydrodynamic solar photospheric model, which has successfully passed an arsenal of observational diagnostics. To quantify systematic errors, we repeat the analysis with three 1D hydrostatic model atmospheres (MARCS, MISS and Holweger & M\\"uller 1974) and a horizontally and temporally-averaged version of the 3D model ($\\langle$3D$\\rangle$). We account for departures from LTE wherever possible. We have scoured the literature for the best transition probabilities, partition functions, hyperfine and other data, and stringently ...

  12. Elemental composition of birdsfoot trefoil. [Lotus corniculatus L

    Energy Technology Data Exchange (ETDEWEB)

    Russelle, M.P.; McGraw, R.L.; Grava, J.; Beuselinck, P.R.

    1985-01-01

    Developmental and environmental effects on mineral nutrient concentration in birdsfoot trefoil (Lotus corniculatus L.) are not well documented. In this study, elemental composition of two birdsfoot trefoil stands were determined from a late vegetative stage through reproductive growth. Norcen birdsfoot trefoil was established on a Glyndon silt loam (coarse-silty, frigid Aeric Calciaquolis)( in Roseau County, in 1980, and Norcen and Leo birdsfoot trefoil were seeded on a Waukegan silt loam (fine-silty over sandy or sandy-skeletal, mixed, mesic Typic Hapludolls) near Rosemount, in 1981. Shoot and root samples were taken at approximately biweekly intervals in the year following establishment. Shoots were separated into stems, leaves, umbels, and seed. Environment influenced the concentration of most elements. This environmental effect was generally consistent among plant parts for C, Mg, S, Na, and Mn; i.e., all parts had lower elemental concentrations at Rosemount than at Roseau. The relationship between environments for P, K, Zn, and Cu concentrations varied with different plant parts; i.e., some plant components had element concentrations higher at the southern than northern location, whereas other components had element concentrations that showed the converse. Although most elements were less concentrated with advancing developmental stage, environment modified the rate and extent of change in concentration of every element in at least one plant part. Interactions of environment with development stage were not as evident for shoots as for the separate shoot components. Whereas other reports have often emphasized the large differences in nutrient concentrations among legume species, this data suggest that nutrient concentration may be as strongly influenced by environment as by species.

  13. The features of finite-element modeling of a structural element of flexible woven composites

    Directory of Open Access Journals (Sweden)

    Dmitry A. Kozhanov

    2016-03-01

    Full Text Available The features of finite-element modeling of both an element itself and its behavior under uniaxial tension have been demonstrated with a structural element of flexible woven composites. The main components of the material, such as reinforcing fabric and material's matrix were examined in modeling. The reinforcing fabric is a plain weave. These yarns were taken as an elastic material. The matrix of the material was considered to be a soft polymer with the possible occurrence of irreversible elastic-plastic deformations. Moreover, the possible occurrence of damages in the structure of the material under high loads was taken into account in modeling. The fields of stresses and strains were built; the zones of the material's internal damages under uniaxial tension were demonstrated. The risk zones of weave were revealed.

  14. Finite-element impact response of debonded composite turbine blades

    Science.gov (United States)

    Dey, Sudip; Karmakar, Amit

    2014-02-01

    This paper investigates on the transient behavior of debonded composite pretwisted rotating shallow conical shells which could be idealized as turbine blades subjected to low velocity normal impact using finite-element method. Lagrange's equation of motion is used to derive the dynamic equilibrium equation and the moderate rotational speeds are considered neglecting the Coriolis effect. An eight-noded isoparametric plate bending element is employed in the finite element formulation incorporating rotary inertia and effects of transverse shear deformation based on Mindlin's theory. The modified Hertzian contact law which accounts for permanent indentation is utilized to compute the impact parameters. The time-dependent equations are solved by using Newmark's time integration scheme. Parametric studies are performed to investigate the effects of triggering parameters like angle of twist, rotational speed, laminate configuration and location of debonding considering low velocity normal impact at the center of eight-layered graphite-epoxy composite cantilevered conical shells with bending stiff ([0o2/{±} 30o]s), torsion stiff ([45°/-45°/-45°/45°]s) and cross-ply ([0°/90°/0°/90°]s) laminate configurations.

  15. Detection of transposable elements by their compositional bias

    Directory of Open Access Journals (Sweden)

    Anxolabéhère Dominique

    2004-07-01

    Full Text Available Abstract Background Transposable elements (TE are mobile genetic entities present in nearly all genomes. Previous work has shown that TEs tend to have a different nucleotide composition than the host genes, either considering codon usage bias or dinucleotide frequencies. We show here how these compositional differences can be used as a tool for detection and analysis of TE sequences. Results We compared the composition of TE sequences and host gene sequences using probabilistic models of nucleotide sequences. We used hidden Markov models (HMM, which take into account the base composition of the sequences (occurrences of words n nucleotides long, with n ranging here from 1 to 4 and the heterogeneity between coding and non-coding parts of sequences. We analyzed three sets of sequences containing class I TEs, class II TEs and genes respectively in three species: Drosophila melanogaster, Cænorhabditis elegans and Arabidopsis thaliana. Each of these sets had a distinct, homogeneous composition, enabling us to distinguish between the two classes of TE and the genes. However the particular base composition of the TEs differed in the three species studied. Conclusions This approach can be used to detect and annotate TEs in genomic sequences and complements the current homology-based TE detection methods. Furthermore, the HMM method is able to identify the parts of a sequence in which the nucleotide composition resembles that of a coding region of a TE. This is useful for the detailed annotation of TE sequences, which may contain an ancient, highly diverged coding region that is no longer fully functional.

  16. A study on major inorganic ion composition of atmospheric aerosols.

    Science.gov (United States)

    Salve, P R; Krupadam, R J; Wate, S R

    2007-04-01

    Atmospheric aerosol samples were collected from Akola and Buldana region covering around 40 sqkm area during October-November 2002 and were analyzed for ten major inorganic ions namely F-, Cl-, NO3-, SO4(2-), PO4(2-), Na+, K+, Ca2+, Mg2+ and NH4+ using ion chromatographic technique. The average mass of aerosols was found to be 225.81 microg/m3 with standard deviation of 31.29 and average total water soluble load of total cations and anions was found to be 4.32 microg/m3. The concentration of ions in samples showed a general pattern as SO4(2-) > NO3- > Cl- > PO4(2-) > F- for anions and Na+ > Ca2+ > NH4+ > Mg2+ > K+ for cations. The overall composition of the aerosols was taken into account to identify the sources. The trend showed higher concentration of sodium followed by calcium, sulfate, nitrate, phosphate and ammoinum and found to be influenced by terrestrial sources. The presence of SO4(2-) and NO3- in aerosols may be due to re-suspension of soil particles. Ca2+, Mg2+ and Cl- are to be derived from soil materials. The presence of NH4+ may be attributed to the reaction of NH3 vapors with acidic gases may react or condense on an acidic particle surface of anthropogenic origin. The atmospheric aerosol is slightly acidic due to neutralization of basicity by SO2 and NO(x).

  17. Historic activity of mt. Vesuvius: major elements and volatile constituents of primary melts

    Science.gov (United States)

    Cecchetti, A.; Marianelli, P.; Metrich, N.; Sbrana, A.

    2003-04-01

    Mt. Vesuvius experienced a three-century long period of semi-persistent activity, after the 1631 eruption and is presently in a phase of rest. During this period, several eruptions displayed composite style since they started with lava effusions and evolved towards explosive activity (lava fountains, phreatomagmatic explosions and occasionally steady columns). The tephrostratigraphic sequence of post-1631 activity is well reconstructed [1] on the basis of historical chronicles and field investigations, whereas information about the feeding system is still weak. We have selected samples related to energetic lava fountain activity that occurred during the 1794, 1822 and 1872 composite-style eruptions for investigating the deep feeding systems of Mt. Vesuvius, during the 1631--1944 period. We present data on melt inclusions and their host olivines. Major elements, S, Cl and F were obtained using the electron microprobe (SX50, Camparis), CO_2 and H_2O by Fourier Transform InfraRed spectroscopy. Carbon was also analysed by nuclear reaction 12C(d,p)13C. The magma batches emitted during the 1794, 1822 and 1872 eruptions brought to the surface primitive olivines (Fo90.4-88.5) containing spinel (Cr/(Cr+Al) = 0.77--0.75). Their inclusions attest of crystallization at high pressure from K-rich (HK) parental magmas with K_2O varying from 4.3 to 6.0, high K_2O/H_2O (up to 2.4), Cl/H_2O (up to 0.25), Cl/F (up to 3) ratios, and H_2O content systematically high and variable from 2.3 to 4.9 wt.%. The most primitive compositions are recorded in melt inclusions from the oldest samples (1794 and 1822 eruptions). We propose a rather rapid transfer of HK-melts carrying olivine crystals from depth. This process is only detectable by the means of melt inclusions in Fo-rich olivines phenocrysts occurring only in the deposits related to the most powerful episodes of lava fountains while the whole rocks are cumulative with respect to clinopyroxene (± leucite). These new data, in addition to

  18. COMPOSITE STRENGTHENING SOLUTIONS FOR REINFORCED CONCRETE LOAD BEARING ELEMENTS

    Directory of Open Access Journals (Sweden)

    Nicolae ȚĂRANU

    2015-11-01

    Full Text Available The results of a complex research and development program relating to the use of fiber reinforced polymeric composite strengthening solutions carried out at the Faculty of Civil Engineering and Building Services Iasi, are presented in this paper. The program has included the conceiving of the structural rehabilitation systems, the detailing and experimental testing of some solutions applied to reinforced concrete beams, slabs and columns (with circular and square cross-section. An efficient use of the component materials to improve the structural performance of the studied reinforced concrete element has been the main target of the research program. The main benefits resulted from the research program refer to the increase of the load capacities, the improvement of the structural response of all strengthened elements and a better control of the failure modes.

  19. Elemental composition of brazing alloys in metallic orthodontic brackets.

    Science.gov (United States)

    Zinelis, Spiros; Annousaki, Olga; Eliades, Theodore; Makou, Margarita

    2004-06-01

    The aim of this study was to assess the elemental composition of the brazing alloy of representative orthodontic brackets. The brackets examined were Gemini (3M, Unitec, Monrovia, Calif), MicroLoc (GAC, Bohemia, NY), OptiMESHxrt (Ormco, Glendora, Calif), and Ultratrim (Dentarum, Ispringen, Germany). Four metallic brackets for each brand were embedded in epoxy resin and after metallographic grinding and polishing were cleaned in a water ultrasonic bath. Scanning electron microscopy and energy-dispersive x-ray microanalysis (EDS) were used to assess the quantitative composition of the brazing alloy. Four EDS spectra were collected for each brazing alloy, and the mean value and standard deviation for the concentration of each element were calculated. The elemental composition of the brazing alloys was determined as follows (percent weight): Gemini: Ni = 83.98 +/- 1.02, Si = 6.46 +/- 0.37, Fe = 5.90 +/- 0.93, Cr = 3.52 +/- 0.34; MicroLoc: Ag = 42.82 +/- 0.18, Au = 32.14 +/- 0.65, Cu = 24.53 +/- 0.26, Mg = 1.12 +/- 0.33; OptiMESHxrt: Au = 67.79 +/- 0.97, Fe = 15.69 +/- 0.29, Ni = 13.01 +/- 0.93, Cr = 4.01 +/- 0.35; Ultratrim: Ag = 87.97 +/- 0.33, Cu = 10.51 +/- 0.45, Mg = 1.29 +/- 0.63, Zn = 1.13 +/- 0.24. The findings of this study showed that different brazing materials were used for the different brands, and thus different performances are expected during intraoral exposure; potential effects on the biological properties also are discussed.

  20. New numerical analysis method in computational mechanics: composite element method

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A new type of FEM, called CEM (composite element method), is proposed to solve the static and dynamic problems of engineering structures with high accuracy and efficiency. The core of this method is to define two sets of coordinate systems for DOF's description after discretizing the structure, i.e. the nodal coordinate system UFEM(ξ) for employing the conventional FEM, and the field coordinate system UCT(ξ) for utilizing classical theory. Then, coupling these two sets of functional expressions could obtain the composite displacement field U(ξ) of CEM. The computations of the stiffness and mass matrices can follow the conventional procedure of FEM. Since the CEM inherents some good properties of the conventional FEM and classical analytical method, it has the powerful versatility to various complex geometric shapes and excellent approximation. Many examples are presented to demonstrate the ability of CEM.

  1. New numerical analysis method in computational mechanics: composite element method

    Institute of Scientific and Technical Information of China (English)

    曾攀

    2000-01-01

    A new type of FEM, called CEM (composite element method), is proposed to solve the static and dynamic problems of engineering structures with high accuracy and efficiency. The core of this method is to define two sets of coordinate systems for DOF’ s description after discretizing the structure, i.e. the nodal coordinate system UFEM(ζ) for employing the conventional FEM, and the field coordinate system UCT(ζ) for utilizing classical theory. Then, coupling these two sets of functional expressions could obtain the composite displacement field U(ζ) of CEM. The computations of the stiffness and mass matrices can follow the conventional procedure of FEM. Since the CEM inherents some good properties of the conventional FEM and classical analytical method, it has the powerful versatility to various complex geometric shapes and excellent approximation. Many examples are presented to demonstrate the ability of CEM.

  2. Isotopic compositions of the elements 2013 (IUPAC Technical Report)

    Science.gov (United States)

    Meija, Juris; Coplen, Tyler B.; Berglund, Michael; Brand, Willi A.; De Bièvre, Paul; Gröning, Manfred; Holden, Norman E.; Irrgeher, Johanna; Loss, Robert D.; Walczyk, Thomas; Prohaska, Thomas

    2016-01-01

    The Commission on Isotopic Abundances and Atomic Weights (ciaaw.org) of the International Union of Pure and Applied Chemistry (iupac.org) has revised the Table of Isotopic Compositions of the Elements (TICE). The update involved a critical evaluation of the recent published literature. The new TICE 2013 includes evaluated data from the “best measurement” of the isotopic abundances in a single sample, along with a set of representative isotopic abundances and uncertainties that accommodate known variations in normal terrestrial materials.

  3. Estimation of elemental composition from proximate analysis of black liquor

    Energy Technology Data Exchange (ETDEWEB)

    Vakkilainen, E.K. [Andritz-Ahlstrom Corporation, Espoo (Finland)

    2000-07-01

    The black liquor properties will vary depending on the raw material used for pulping, the pulping conditions, the equipment used for pulping and the treatment of the liquor after the pulping. Accurate analysis of black liquor is needed to determine energy efficiency of o pulp mill, to calculate gas flows for environmental compliance reports and for production statistics. Black liquor composition and combustion properties can be estimated from known spread of data. Main source has been an internal company black liquor databank, which contains over 900 black liquor analysis. Regression equations for black liquor carbon, hydrogen, and inorganic element contents were derived. (orig.)

  4. Major histocompatibility complex class I core promoter elements are not essential for transcription in vivo.

    Science.gov (United States)

    Barbash, Zohar S; Weissman, Jocelyn D; Campbell, John A; Mu, Jie; Singer, Dinah S

    2013-11-01

    The role of core promoter elements in regulating transcription initiation is largely unknown for genes subject to complex regulation. Major histocompatibility complex class I genes are ubiquitously expressed and governed by tissue-specific and hormonal signals. Transcription initiates at multiple sites within the core promoter, which contains elements homologous to the canonical elements CCAAT, TATAA, Sp1 binding site (Sp1BS), and Initiator (Inr). To determine their functions, expression of class I transgenes with individually mutated elements was assessed. Surprisingly, all mutant promoters supported transcription. However, each mutated core promoter element had a distinct effect on expression: CAAT box mutations modulated constitutive expression in nonlymphoid tissues, whereas TATAA-like element mutations dysregulated transcription in lymphoid tissues. Inr mutations aberrantly elevated expression. Sp1BS element mutations resulted in variegated transgene expression. RNA polymerase II binding and histone H3K4me3 patterns correlated with transgene expression; H3K9me3 marks partially correlated. Whereas the wild-type, TATAA-like, and CAAT mutant promoters were activated by gamma interferon, the Sp1 and Inr mutants were repressed, implicating these elements in regulation of hormonal responses. These results lead to the surprising conclusion that no single element is required for promoter activity. Rather, each plays a distinct role in promoter activity, chromatin structure, tissue-specific expression, and extracellular signaling.

  5. Inductively Coupled Plasma Optical-Emission Spectroscopy Determination of Major and Minor Elements in Vinegar

    Directory of Open Access Journals (Sweden)

    Arzu AKPINAR-BAYIZIT

    2010-12-01

    Full Text Available This study characterizes the mineral content of vinegar samples. The concentrations of Na, K, Ca, Mg and P (major elements as well as Fe, Mn, Sn, Cu, Ni, Zn, Pb and Cd (minor elements were determined in 35 commercial vinegar samples using inductively coupled plasma optical-emission spectrometry (ICP-OES. The elements with the highest concentrations were K, Na, Ca, Mg and P. The concentrations of heavy metals in the vinegar samples, including Cd, Ni, Sn and Pb, were not considered a health risk.

  6. Long Fibre Composite Modelling Using Cohesive User's Element

    Science.gov (United States)

    Kozák, Vladislav; Chlup, Zdeněk

    2010-09-01

    The development glass matrix composites reinforced by unidirectional long ceramic fibre has resulted in a family of very perspective structural materials. The only disadvantage of such materials is relatively high brittleness at room temperature. The main micromechanisms acting as toughening mechanism are the pull out, crack bridging, matrix cracking. There are other mechanisms as crack deflection etc. but the primer mechanism is mentioned pull out which is governed by interface between fibre and matrix. The contribution shows a way how to predict and/or optimise mechanical behaviour of composite by application of cohesive zone method and write user's cohesive element into the FEM numerical package Abaqus. The presented results from numerical calculations are compared with experimental data. Crack extension is simulated by means of element extinction algorithms. The principal effort is concentrated on the application of the cohesive zone model with the special traction separation (bridging) law and on the cohesive zone modelling. Determination of micro-mechanical parameters is based on the combination of static tests, microscopic observations and numerical calibration procedures.

  7. Geometrically Nonlinear Finite Element Analysis of a Composite Space Reflector

    Science.gov (United States)

    Lee, Kee-Joo; Leet, Sung W.; Clark, Greg; Broduer, Steve (Technical Monitor)

    2001-01-01

    Lightweight aerospace structures, such as low areal density composite space reflectors, are highly flexible and may undergo large deflection under applied loading, especially during the launch phase. Accordingly, geometrically nonlinear analysis that takes into account the effect of finite rotation may be needed to determine the deformed shape for a clearance check and the stress and strain state to ensure structural integrity. In this study, deformation of the space reflector is determined under static conditions using a geometrically nonlinear solid shell finite element model. For the solid shell element formulation, the kinematics of deformation is described by six variables that are purely vector components. Because rotational angles are not used, this approach is free of the limitations of small angle increments. This also allows easy connections between substructures and large load increments with respect to the conventional shell formulation using rotational parameters. Geometrically nonlinear analyses were carried out for three cases of static point loads applied at selected points. A chart shows results for a case when the load is applied at the center point of the reflector dish. The computed results capture the nonlinear behavior of the composite reflector as the applied load increases. Also, they are in good agreement with the data obtained by experiments.

  8. Major and trace element geochemistry of Lake Bogoria and Lake Nakuru, Kenya, during extreme draught

    OpenAIRE

    Jirsa, Franz; Gruber, Martin; Stojanovic, Anja; Omondi, Steve Odour; Mader, Dieter; Körner, Wilfried; Schagerl, Michael

    2013-01-01

    The physico-chemical properties of water samples from the two athalassic endorheic lakes Bogoria and Nakuru in Kenya were analysed. Surface water samples were taken between July 2008 and October 2009 in weekly intervals from each lake. The following parameters were determined: pH, salinity, electric conductivity, dissolved organic carbon (DOC), the major cations (FAAS and ICP-OES) and the major anions (IC), as well as certain trace elements (ICP-OES). Samples of superficial sediments were tak...

  9. Elemental composition of human teeth with emphasis on trace constituents: a review

    Energy Technology Data Exchange (ETDEWEB)

    Sachs, W H

    1978-04-01

    Literature covered by the current review is based on a search of Chemical Abstracts, 1917 through 1975. Early studies, pre-dating 1940, are referenced primarily for historical interest. Emphasis is on the micro-constituents of human teeth, those present at concentrations less than a few tenths of a percent by weight. Within this category of data, we have been primarily concerned with the radiochemically stable nuclides. The important relationship between caries and trace elements is covered only insofar as carious teeth exhibit properties with respect to trace element composition that differ from normal teeth. Having made these disclaimers, we note that an attempt has been made to cover the literature exhaustively; although some important results have undoubtedly been overlooked. It is our hope, however, that sufficient material has been included in this review to facilitate further recovery of data by interested individuals. In Chapter 1, analytical techniques that have been employed in this field are briefly presented; discussion centers on problems associated with preparation of specimens for analysis. Chapter 2 is devoted to topical coverage of data on the inorganic composition of teeth. An element-by-element tabulation of concentration data is provided, our statistical analysis of selected data explained, and evidence concerning several major factors thought to influence dental composition evaluated. These include provenance, age, sex, distribution, and tooth type/intermouth variation.

  10. Retrotransposons Are the Major Contributors to the Expansion of the Drosophila ananassae Muller F Element.

    Science.gov (United States)

    Leung, Wilson; Shaffer, Christopher D; Chen, Elizabeth J; Quisenberry, Thomas J; Ko, Kevin; Braverman, John M; Giarla, Thomas C; Mortimer, Nathan T; Reed, Laura K; Smith, Sheryl T; Robic, Srebrenka; McCartha, Shannon R; Perry, Danielle R; Prescod, Lindsay M; Sheppard, Zenyth A; Saville, Ken J; McClish, Allison; Morlock, Emily A; Sochor, Victoria R; Stanton, Brittney; Veysey-White, Isaac C; Revie, Dennis; Jimenez, Luis A; Palomino, Jennifer J; Patao, Melissa D; Patao, Shane M; Himelblau, Edward T; Campbell, Jaclyn D; Hertz, Alexandra L; McEvilly, Maddison F; Wagner, Allison R; Youngblom, James; Bedi, Baljit; Bettincourt, Jeffery; Duso, Erin; Her, Maiye; Hilton, William; House, Samantha; Karimi, Masud; Kumimoto, Kevin; Lee, Rebekah; Lopez, Darryl; Odisho, George; Prasad, Ricky; Robbins, Holly Lyn; Sandhu, Tanveer; Selfridge, Tracy; Tsukashima, Kara; Yosif, Hani; Kokan, Nighat P; Britt, Latia; Zoellner, Alycia; Spana, Eric P; Chlebina, Ben T; Chong, Insun; Friedman, Harrison; Mammo, Danny A; Ng, Chun L; Nikam, Vinayak S; Schwartz, Nicholas U; Xu, Thomas Q; Burg, Martin G; Batten, Spencer M; Corbeill, Lindsay M; Enoch, Erica; Ensign, Jesse J; Franks, Mary E; Haiker, Breanna; Ingles, Judith A; Kirkland, Lyndsay D; Lorenz-Guertin, Joshua M; Matthews, Jordan; Mittig, Cody M; Monsma, Nicholaus; Olson, Katherine J; Perez-Aragon, Guillermo; Ramic, Alen; Ramirez, Jordan R; Scheiber, Christopher; Schneider, Patrick A; Schultz, Devon E; Simon, Matthew; Spencer, Eric; Wernette, Adam C; Wykle, Maxine E; Zavala-Arellano, Elizabeth; McDonald, Mitchell J; Ostby, Kristine; Wendland, Peter; DiAngelo, Justin R; Ceasrine, Alexis M; Cox, Amanda H; Docherty, James E B; Gingras, Robert M; Grieb, Stephanie M; Pavia, Michael J; Personius, Casey L; Polak, Grzegorz L; Beach, Dale L; Cerritos, Heaven L; Horansky, Edward A; Sharif, Karim A; Moran, Ryan; Parrish, Susan; Bickford, Kirsten; Bland, Jennifer; Broussard, Juliana; Campbell, Kerry; Deibel, Katelynn E; Forka, Richard; Lemke, Monika C; Nelson, Marlee B; O'Keeffe, Catherine; Ramey, S Mariel; Schmidt, Luke; Villegas, Paola; Jones, Christopher J; Christ, Stephanie L; Mamari, Sami; Rinaldi, Adam S; Stity, Ghazal; Hark, Amy T; Scheuerman, Mark; Silver Key, S Catherine; McRae, Briana D; Haberman, Adam S; Asinof, Sam; Carrington, Harriette; Drumm, Kelly; Embry, Terrance; McGuire, Richard; Miller-Foreman, Drew; Rosen, Stella; Safa, Nadia; Schultz, Darrin; Segal, Matt; Shevin, Yakov; Svoronos, Petros; Vuong, Tam; Skuse, Gary; Paetkau, Don W; Bridgman, Rachael K; Brown, Charlotte M; Carroll, Alicia R; Gifford, Francesca M; Gillespie, Julie Beth; Herman, Susan E; Holtcamp, Krystal L; Host, Misha A; Hussey, Gabrielle; Kramer, Danielle M; Lawrence, Joan Q; Martin, Madeline M; Niemiec, Ellen N; O'Reilly, Ashleigh P; Pahl, Olivia A; Quintana, Guadalupe; Rettie, Elizabeth A S; Richardson, Torie L; Rodriguez, Arianne E; Rodriguez, Mona O; Schiraldi, Laura; Smith, Joanna J; Sugrue, Kelsey F; Suriano, Lindsey J; Takach, Kaitlyn E; Vasquez, Arielle M; Velez, Ximena; Villafuerte, Elizabeth J; Vives, Laura T; Zellmer, Victoria R; Hauke, Jeanette; Hauser, Charles R; Barker, Karolyn; Cannon, Laurie; Parsamian, Perouza; Parsons, Samantha; Wichman, Zachariah; Bazinet, Christopher W; Johnson, Diana E; Bangura, Abubakarr; Black, Jordan A; Chevee, Victoria; Einsteen, Sarah A; Hilton, Sarah K; Kollmer, Max; Nadendla, Rahul; Stamm, Joyce; Fafara-Thompson, Antoinette E; Gygi, Amber M; Ogawa, Emmy E; Van Camp, Matt; Kocsisova, Zuzana; Leatherman, Judith L; Modahl, Cassie M; Rubin, Michael R; Apiz-Saab, Susana S; Arias-Mejias, Suzette M; Carrion-Ortiz, Carlos F; Claudio-Vazquez, Patricia N; Espada-Green, Debbie M; Feliciano-Camacho, Marium; Gonzalez-Bonilla, Karina M; Taboas-Arroyo, Mariela; Vargas-Franco, Dorianmarie; Montañez-Gonzalez, Raquel; Perez-Otero, Joseph; Rivera-Burgos, Myrielis; Rivera-Rosario, Francisco J; Eisler, Heather L; Alexander, Jackie; Begley, Samatha K; Gabbard, Deana; Allen, Robert J; Aung, Wint Yan; Barshop, William D; Boozalis, Amanda; Chu, Vanessa P; Davis, Jeremy S; Duggal, Ryan N; Franklin, Robert; Gavinski, Katherine; Gebreyesus, Heran; Gong, Henry Z; Greenstein, Rachel A; Guo, Averill D; Hanson, Casey; Homa, Kaitlin E; Hsu, Simon C; Huang, Yi; Huo, Lucy; Jacobs, Sarah; Jia, Sasha; Jung, Kyle L; Wai-Chee Kong, Sarah; Kroll, Matthew R; Lee, Brandon M; Lee, Paul F; Levine, Kevin M; Li, Amy S; Liu, Chengyu; Liu, Max Mian; Lousararian, Adam P; Lowery, Peter B; Mallya, Allyson P; Marcus, Joseph E; Ng, Patrick C; Nguyen, Hien P; Patel, Ruchik; Precht, Hashini; Rastogi, Suchita

    2017-08-07

    The discordance between genome size and the complexity of eukaryotes can partly be attributed to differences in repeat density. The Muller F element (∼5.2 Mb) is the smallest chromosome in Drosophila melanogaster, but it is substantially larger (>18.7 Mb) in D. ananassae To identify the major contributors to the expansion of the F element and to assess their impact, we improved the genome sequence and annotated the genes in a 1.4-Mb region of the D. ananassae F element, and a 1.7-Mb region from the D element for comparison. We find that transposons (particularly LTR and LINE retrotransposons) are major contributors to this expansion (78.6%), while Wolbachia sequences integrated into the D. ananassae genome are minor contributors (0.02%). Both D. melanogaster and D. ananassae F-element genes exhibit distinct characteristics compared to D-element genes (e.g., larger coding spans, larger introns, more coding exons, and lower codon bias), but these differences are exaggerated in D. ananassae Compared to D. melanogaster, the codon bias observed in D. ananassae F-element genes can primarily be attributed to mutational biases instead of selection. The 5' ends of F-element genes in both species are enriched in dimethylation of lysine 4 on histone 3 (H3K4me2), while the coding spans are enriched in H3K9me2. Despite differences in repeat density and gene characteristics, D. ananassae F-element genes show a similar range of expression levels compared to genes in euchromatic domains. This study improves our understanding of how transposons can affect genome size and how genes can function within highly repetitive domains. Copyright © 2017 Leung et al.

  11. Retrotransposons Are the Major Contributors to the Expansion of the Drosophila ananassae Muller F Element

    Directory of Open Access Journals (Sweden)

    Wilson Leung

    2017-08-01

    Full Text Available The discordance between genome size and the complexity of eukaryotes can partly be attributed to differences in repeat density. The Muller F element (∼5.2 Mb is the smallest chromosome in Drosophila melanogaster, but it is substantially larger (>18.7 Mb in D. ananassae. To identify the major contributors to the expansion of the F element and to assess their impact, we improved the genome sequence and annotated the genes in a 1.4-Mb region of the D. ananassae F element, and a 1.7-Mb region from the D element for comparison. We find that transposons (particularly LTR and LINE retrotransposons are major contributors to this expansion (78.6%, while Wolbachia sequences integrated into the D. ananassae genome are minor contributors (0.02%. Both D. melanogaster and D. ananassae F-element genes exhibit distinct characteristics compared to D-element genes (e.g., larger coding spans, larger introns, more coding exons, and lower codon bias, but these differences are exaggerated in D. ananassae. Compared to D. melanogaster, the codon bias observed in D. ananassae F-element genes can primarily be attributed to mutational biases instead of selection. The 5′ ends of F-element genes in both species are enriched in dimethylation of lysine 4 on histone 3 (H3K4me2, while the coding spans are enriched in H3K9me2. Despite differences in repeat density and gene characteristics, D. ananassae F-element genes show a similar range of expression levels compared to genes in euchromatic domains. This study improves our understanding of how transposons can affect genome size and how genes can function within highly repetitive domains.

  12. BRCA1 Exon 11, a CERES (Composite Regulatory Element of Splicing Element Involved in Splice Regulation

    Directory of Open Access Journals (Sweden)

    Claudia Tammaro

    2014-07-01

    Full Text Available Unclassified variants (UV of BRCA1 can affect normal pre-mRNA splicing. Here, we investigate the UV c.693G>A, a “silent” change in BRCA1 exon 11, which we have found induces aberrant splicing in patient carriers and in vitro. Using a minigene assay, we show that the UV c.693G>A has a strong effect on the splicing isoform ratio of BRCA1. Systematic site-directed mutagenesis of the area surrounding the nucleotide position c.693G>A induced variable changes in the level of exon 11 inclusion/exclusion in the mRNA, pointing to the presence of a complex regulatory element with overlapping enhancer and silencer functions. Accordingly, protein binding analysis in the region detected several splicing regulatory factors involved, including SRSF1, SRSF6 and SRSF9, suggesting that this sequence represents a composite regulatory element of splicing (CERES.

  13. Relationship between Major Mineral Nutrient Elements Contents and Flower Colors of Herbaceous Peony (Paeonia Lactiflora Pall.

    Directory of Open Access Journals (Sweden)

    Chengzhong Li

    2015-02-01

    Full Text Available Herbaceous peony (Paeonia lactiflora Pall. is a famous ornamental plant with bright flowers and lush leaves. The flower petal can be used as a fragrant food additive. Understanding the mineral nutrient contents in P. lactiflora is necessary for guiding its cultivation practices as well as its use as a food additive. In this study, we investigated the mineral contents including Calcium (Ca, Potassium (K, Magnesium (Mg, Copper (Cu, iron (Fe and Zinc (Zn in petals and leaves of 20 selected herbaceous peony cultivars in four groups according to their flower colors and the relationship between major mineral nutrient elements contents and flower colors was assessed. In petals, the contents of minerals were in this order K>Ca>Mg>Fe>Zn>Cu; while in leaves were: Ca>K>Mg>Fe>Zn>Cu. Major element contents in petals and leaves among 4 cultivar groups were different at statistically significant levels. Petals in red or purple have higher amount of most major minerals than those in white or pink colors. The wide range of mineral element contents among cultivars is attributed to genotypic variations. The correlations of major mineral elements in the petals and leaves of herbaceous peony cultivars indicate that mineral ions compete for the same absorption sites. The results provided some scientific support for petal nutrition of herbaceous peony and selecting herbaceous peony flowers with dark colors for edible is feasible.

  14. Geochemical characterisation of major and trace elements in the coastal sediments of India

    Digital Repository Service at National Institute of Oceanography (India)

    Alagarsamy, R.; Zhang, J.

    and west coasts were analysed using inductively coupled plasma atomic emission spectroscopy for selected major (i.e. Al, Ca, Fe, K, Ti, Mg and Na) and trace elements (e.g. Ba, Co, Cr, Cu, Ga, Ni, P and V), after total dissolution. The main objectives...

  15. Major Elements and Issues in Performance Management System: A Literature Review

    Science.gov (United States)

    Bae, Eul-Kyoo

    2006-01-01

    Due to rapidly changing business environment, HRD practitioners are unprecedentedly demanded to actively participate in improving organizational effectiveness as performance management specialist. The purpose of this study was to examine and discuss major elements and issues in performance management system through an extensive literature review…

  16. Spinel from Apollo 12 Olivine Mare Basalts: Chemical Systematics of Selected Major, Minor, and Trace Elements

    Science.gov (United States)

    Papike, J. J.; Karner, J. M.; Shearer, C. K.; Spilde, M. N.

    2002-01-01

    Spinels from Apollo 12 Olivine basalts have been studied by Electron and Ion microprobe techniques. The zoning trends of major, minor and trace elements provide new insights into the conditions under which planetary basalts form. Additional information is contained in the original extended abstract.

  17. Volatile (Cl, F and S) and major element constraints on subduction-related mantle metasomatism along the alkaline basaltic backarc, Payenia, Argentina

    DEFF Research Database (Denmark)

    Brandt, Frederik Ejvang; Holm, Paul Martin; Hansteen, Thor H.

    2017-01-01

    We present data on volatile (S, F and Cl) and major element contents in olivine-hosted melt inclusions (MIs) from alkaline basaltic tephras along the Quaternary Payenia backarc volcanic province (~34°S–38°S) of the Andean Southern Volcanic Zone (SVZ). The composition of Cr-spinel inclusions and h...

  18. Assessment of trace element accumulation in surface sediments off Chennai coast after a major flood event.

    Science.gov (United States)

    Gopal, V; Krishnakumar, S; Simon Peter, T; Nethaji, S; Suresh Kumar, K; Jayaprakash, M; Magesh, N S

    2017-01-30

    The present study was conducted to assess the trace element concentration in marine surface sediments after major flood event of Chennai metropolis, India. Thirty surface samples were collected from off Chennai coast. Trace elements, organic matter, CaCO3, sand-silt-clay and C/N ratios were studied to understand the accumulation dynamics on sediments. The elemental concentration, calcium carbonate and OM distribution suggest that they are derived from urban runoff and transported through Adyar and Cooum Rivers. The enrichment factor reveals that the sediments are enriched by Pb, Cu, Zn, Cr, Co, Ni followed by Fe. The observed Igeo value shows that the samples are contaminated by Pb, Cu and Zn. The elemental concentration of the surface sediments is low when compared to other coastal region except Pb. The elevated level of Pb in the surface sediments is probably due to migration of contaminated urban soil from industrial and transportation sectors into marine environment.

  19. Multi-element Composition of Terricolous Lichens in the Northwest European Russia

    Science.gov (United States)

    Shevchenko, V. P.; Pokrovsky, O. S.; Vasyukova, E. V.; Savvichev, A. S.; Zamber, N. S.

    2008-12-01

    Lichens (fungi living with an alga or cyanobacterium) absorb substances, including trace elements through dry and wet deposition, often to very high concentrations, and have been widely used as biomonitors. We studied multi-element composition of terricolous lichens (mostly of genera Cladonia and Cetraria) collected in 2004-2006 in Kola Peninsula, Karelia and Arkhangelsk Region of NW Russia. 31 samples were analyzed. The unwashed lichen samples were air dried and homogenised to a fine powder in an agate crusher, in order to exclude any contamination of trace metals. Samples were treated in a four-step chemical digestion procedure (full dissolution via acid attack). Major element concentrations were determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES), and trace element concentrations by inductively coupled plasma-mass spectrometry (ICP-MS, Agilent 7500). An enrichment factor (EF) was calculated for each element (X) relative to the composition of earth's crust: EF = ((X/Al) in lichen) / ((X/Al) in the earth's crust). Al was used as a crustal indicator. In most samples contents of Ti, V, Cr, Mn, Fe, Co, rare earth elements (REEs), Th, U are at the background level and their EFs are less than 10. These low EF values indicated that, relative to average values for crustal rocks, there was no enrichment of these elements in the lichen concerned. For some elements (Se, Cd, Zn, Sb, Pb, As, Ni, Cu) consistently higher EF values were obtained. These higher values were interpreted in terms of sources of both anthropogenic and natural sources other than crustal rock and (or) soil. For instance, these elements could be derived by long-range atmospheric transport. Highest concentrations of Cu, Ni, Pb in lichens and EF by these elements were registered in Lovozersky Tundry (Kola Peninsula) and in Paanayarvi area (NW Karelia). Lichens here are polluted by Monchegorsk and Nickel Cu-Ni smelters. In the vicinity of Kostomukshsky Ore-dressing Mill lichens

  20. Major and trace elements in zooplankton from the Northern Gulf of California during summer.

    Science.gov (United States)

    Rentería-Cano, Margarita Elena; Sánchez-Velasco, Laura; Shumilin, Evgueni; Lavín, Miguel F; Gómez-Gutiérrez, Jaime

    2011-09-01

    We report the distribution of major and trace element concentrations in epipelagic zooplankton collected in the Northern Gulf of California in August 2003. The Bray-Curtis index defined three element assemblages in zooplankton: (1) major metals, which included only two elements, Na (3.6-17.0%) and Ca (1.0-4.8%). Na had its highest concentrations in the shallow tidally mixed Upper Gulf, where high salinity, temperature, and zooplankton biomass (dominated by copepods) prevailed. Ca showed its highest concentrations south of Ballenas Channel, characterized by tidal mixing and convergence-induced upwelling, indicated by low sea-surface temperature, salinity, and zooplankton biomass; (2) Six biological essential elements, like Fe (80-9,100 mg kg(-1)) and Zn (20-2,570 mg kg(-1)), were detected in high concentrations in zooplankton collected near Guaymas Basin, which had high surface temperature and chlorophyll a concentrations. (3) Metals of terrigenous origin, such as Sc (0.01-1.4 mg kg(-1)) and Th (0.03-2.3 mg kg(-1)), and redox-sensitive metals, like Co (3-23.8 mg kg(-1)); this was the assemblage with the largest number of elements (15). Both types of elements of assemblage 3 had maximum concentrations in the cyclonic eddy that dominates the summer circulation in the Northern region. We concluded that sediment resuspension by tidal mixing in the Upper Gulf, upwelling south of Ballenas Channel, and the cyclonic eddy were key oceanographic features that affected the element concentrations of epipelagic zooplankton in the Northern Gulf of California. Oceanographic mechanisms such as these may contribute to element incorporation in marine organisms in other seas.

  1. Composition and distribution of elements and ultrastructural topography of a human cardiac calculus.

    Science.gov (United States)

    Cheng, Ching-Li; Chang, Hsiao-Huang; Huang, Pei-Jung; Chu, Yu-Ting; Lin, Shan-Yang

    2013-04-01

    Trace elements (TEs) may contribute to the formation of calculi or stones or be involved in the aetiopathogenesis of stone diseases. The compositions and spatial distribution of elements from the inner nucleus to outer crust of the cardiac calculus were investigated by energy-dispersive X-ray fluorescence (EDXRF) spectrometer. The surface topograph, distribution map of elements, elemental and chemical compositions were also determined by environmental scanning electron microscope (ESEM)-energy-dispersive X-ray (EDX) analysis. Twenty-five elements were identifiable from 18 positions on the cardiac calculus by EDXRF spectrometer, in which the highest concentrations of toxic TEs (Ni, Pt, Hg, Sn, Pb, W, Au, Al, Si) and higher levels of essential TEs (Ca, Sr, Cr, P) were detected. A moderate positive Pearson's correlation between TEs concentrations of Mg, Ca or P and location differences from centre to periphery in the cardiac calculus was observed. A positive correlation was also found for Ca/Zn and Ca/Cu, indicating the gradual increase of calcium concentration from inner nucleus to outer crust of cardiac calculus. The drop-like nodules/crystals on the surface of petrous part of cardiac calculus were observed from ESEM analysis. ESEM-EDX analysis determined the calculus to be predominantly composed of calcium hydroxyapatite and cholesterol, as indicated by the petrous surface and drop-like nodules/crystals, respectively. This composition was confirmed using a portable Raman analyser. The spatial distribution analysis indicated a gradual increase in Mg, P and Ca concentrations from the inner nucleus to the outer crust of the cardiac calculus. The major chemical compositions of calcium hydroxyapatite and cholesterol were detected on this cardiac calculus.

  2. Composite Stellar Populations and Element by Element Abundances in the Milky Way Bulge and Elliptical Galaxies

    CERN Document Server

    Tang, Baitian; Davis, A Bianca

    2014-01-01

    This paper explores the integrated-light characteristics of the Milky Way (MW) bulge and to what extent they match those of elliptical galaxies in the local universe. We model composite stellar populations with realistic abundance distribution functions (ADFs), tracking the trends of individual elements as a function of overall heavy element abundance as actually observed in MW bulge stars. The resultant predictions for absorption feature strengths from the MW bulge mimic elliptical galaxies better than solar neighborhood stars do, but the MW bulge does not match elliptical galaxies, either. Comparing bulge versus elliptical galaxies, Fe, Ti, and Mg trend about the same for both but C, Na, and Ca seem irreconcilably different. Exploring the behavior of abundance compositeness leads to the concepts of "red lean" where a narrower ADF appears more metal rich than a wide one, and "red spread" where the spectral difference between wide and narrow ADFs increases as the ADF peak is moved to more metal-rich values. T...

  3. Major element,trace element,and Sr,Nd and Pb iso-tope studies of Cenozoic basalts from the South China Sea

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The whole rock K-Ar ages of basalts from the South China Sea basin vary from 3.8 to 7.9 Ma, which suggest that intra-plate volcanism after the cessation of spreading of the South China Sea (SCS) is comparable to that in adjacent regions around the SCS, i.e., Leiqiong Peninsula, northern margin of the SCS, Indochina block, and so on. Based on detailed petrographic studies, we selected many fresh ba-saltic rocks and measured their major element, trace element, and Sr-Nd-Pb isotope compositions. Geochemical characteristics of major element and trace element show that these basaltic rocks belong to alkali basalt magma series, and are similar to OIB-type basalt. The extent of partial melting of mantle rock in source region is very low, and magma may experience crystallization differentiation and cu-mulation during the ascent to or storing in the high-level magma chamber. Sr-Nd-Pb isotopic data of these basaltic rocks imply an inhomogeneous mantle below the South China Sea. The nature of magma origin has a two end-member mixing model, one is EM2 (Enriched Mantle 2) which may be originated from mantle plume, the other is DMM (Depleted MORB Mantle). Pb isotopic characteristics show the Dupal anomaly in the South China Sea, and combined with newly found Dupal anomaly at Gakkel ridge in Arctic Ocean, this implies that Dupal anomaly is not only limited to South Hemisphere. In variation diagrams among Sr, Nd and Pb, the origin nature of mantle below the SCS is similar to those below Leiqiong peninsula, northern margin of the SCS and Indochina peninsula, and is different from those below north and northeast China. This study provides geochemical constraints on Hainan mantle plume.

  4. The elemental composition of the Sun. I. The intermediate mass elements Na to Ca

    Science.gov (United States)

    Scott, Pat; Grevesse, Nicolas; Asplund, Martin; Sauval, A. Jacques; Lind, Karin; Takeda, Yoichi; Collet, Remo; Trampedach, Regner; Hayek, Wolfgang

    2015-01-01

    The chemical composition of the Sun is an essential piece of reference data for astronomy, cosmology, astroparticle, space and geo-physics: elemental abundances of essentially all astronomical objects are referenced to the solar composition, and basically every process involving the Sun depends on its composition. This article, dealing with the intermediate-mass elements Na to Ca, is the first in a series describing the comprehensive re-determination of the solar composition. In this series we severely scrutinise all ingredients of the analysis across all elements, to obtain the most accurate, homogeneous and reliable results possible. We employ a highly realistic 3D hydrodynamic model of the solar photosphere, which has successfully passed an arsenal of observational diagnostics. For comparison, and to quantify remaining systematic errors, we repeat the analysis using three different 1D hydrostatic model atmospheres (marcs, miss and Holweger & Müller 1974, Sol. Phys., 39, 19) and a horizontally and temporally-averaged version of the 3D model (⟨ 3D ⟩). We account for departures from local thermodynamic equilibrium (LTE) wherever possible. We have scoured the literature for the best possible input data, carefully assessing transition probabilities, hyperfine splitting, partition functions and other data for inclusion in the analysis. We have put the lines we use through a very stringent quality check in terms of their observed profiles and atomic data, and discarded all that we suspect to be blended. Our final recommended 3D+NLTE abundances are: log ɛNa = 6.21 ± 0.04, log ɛMg = 7.59 ± 0.04, log ɛAl = 6.43 ± 0.04, log ɛSi = 7.51 ± 0.03, log ɛP = 5.41 ± 0.03, log ɛS = 7.13 ± 0.03, log ɛK = 5.04 ± 0.05 and log ɛCa = 6.32 ± 0.03. The uncertainties include both statistical and systematic errors. Our results are systematically smaller than most previous ones with the 1D semi-empirical Holweger & Müller model, whereas the ⟨ 3D ⟩ model returns

  5. Trace and major element pollution originating from coal ash suspension and transport processes.

    Science.gov (United States)

    Popovic, A; Djordjevic, D; Polic, P

    2001-04-01

    Coal ash obtained by coal combustion in the "Nikola Tesla A" power plant in Obrenovac, near Belgrade, Yugoslavia, is mixed with water of the Sava river and transported to the dump. In order to assess pollution caused by leaching of some minor and major elements during ash transport through the pipeline, two sets of samples (six samples each) were subjected to a modified sequential extraction. The first set consisted of coal ash samples taken immediately after combustion, while the second set was obtained by extraction with river water, imitating the processes that occur in the pipeline. Samples were extracted consecutively with distilled water and a 1 M solution of KCl, pH 7, and the differences in extractability were compared in order to predict potential pollution. Considering concentrations of seven trace elements as well as five major elements in extracts from a total of 12 samples, it can be concluded that lead and cadmium do not present an environmental threat during and immediately after ash transport to the dump. Portions of zinc, nickel and chromium are released during the ash transport, and arsenic and manganese are released continuously. Copper and iron do not present an environmental threat due to element leaching during and immediately after the coal ash suspension and transport. On the contrary, these elements, as well as chromium, become concentrated during coal ash transport. Adsorbed portions of calcium, magnesium and potassium are also leached during coal ash transport.

  6. Size distributions of major elements in residual ash particles from coal combustion

    Institute of Scientific and Technical Information of China (English)

    YU DunXi; XU MingHou; YAO Hong; LIU XiaoWei

    2009-01-01

    Combustion experiments for three coals of different ranks were conducted in an electrically-heated drop tube furnace. The size distributions of major elements in the residual ash particles (>0.4μm) such as AI, Si, S, P, Na, Mg, K, Ca and Fe were investigated. The experimental results showed that the concentrations of AI and Si in the residual ash particles decreased with decreasing particle size, while the concentrations of S and P increased with decreasing particle size. No consistent size distributions were obtained for Na, Mg, K, Ca and Fe. The established deposition model accounting for trace element distributions was demonstrated to be applicable to some major elements as well. The modeling results indicated that the size distributions of the refractory elements, AI and Si, were mainly influenced by the deposition of vaporized elements on particle surfaces. A dominant fraction of S and P vaporized during coal combustion. Their size distributions were determined by surface condensation, reaction or adsorption. The partitioning mechanisms of Na, Mg, K, Ca and Fe were more complex.

  7. Element free Galerkin formulation of composite beam with longitudinal slip

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, Dzulkarnain; Mokhtaram, Mokhtazul Haizad [Department of Civil Engineering, Universiti Selangor, Bestari Jaya, Selangor (Malaysia); Badli, Mohd Iqbal; Yassin, Airil Y. Mohd [Faculty of Civil Engineering, Universiti Teknologi Malaysia, Skudai, Johor (Malaysia)

    2015-05-15

    Behaviour between two materials in composite beam is assumed partially interact when longitudinal slip at its interfacial surfaces is considered. Commonly analysed by the mesh-based formulation, this study used meshless formulation known as Element Free Galerkin (EFG) method in the beam partial interaction analysis, numerically. As meshless formulation implies that the problem domain is discretised only by nodes, the EFG method is based on Moving Least Square (MLS) approach for shape functions formulation with its weak form is developed using variational method. The essential boundary conditions are enforced by Langrange multipliers. The proposed EFG formulation gives comparable results, after been verified by analytical solution, thus signify its application in partial interaction problems. Based on numerical test results, the Cubic Spline and Quartic Spline weight functions yield better accuracy for the EFG formulation, compares to other proposed weight functions.

  8. Characterizing the Effect of Shock on Isotopic Ages I: Ferroan Anorthosite Major Elements

    Science.gov (United States)

    Edmunson, J.; Cohen, B. A.; Spilde, M. N.

    2009-01-01

    A study underway at Marshall Space Flight Center is further characterizing the effects of shock on isotopic ages. The study was inspired by the work of L. Nyquist et al. [1, 2], but goes beyond their work by investigating the spatial distribution of elements in lunar ferroan anorthosites (FANs) and magnesium-suite (Mg-suite) rocks in order to understand the processes that may influence the radioisotope ages obtained on early lunar samples. This paper discusses the first data set (major elements) obtained on FANs 62236 and 67075.

  9. Vibration analysis of composite pipes using the finite element method with B-spline wavelets

    Energy Technology Data Exchange (ETDEWEB)

    Oke, Wasiu A.; Khulief, Yehia A. [King Fahd University of Petroleum and Minerals, Dhahran (Saudi Arabia)

    2016-02-15

    A finite element formulation using the B-spline wavelets on the interval is developed for modeling the free vibrations of composite pipes. The composite FRP pipe element is treated as a beam element. The finite pipe element is constructed in the wavelet space and then transformed to the physical space. Detailed expressions of the mass and stiffness matrices are derived for the composite pipe using the Bspline scaling and wavelet functions. Both Euler-Bernoulli and Timoshenko beam theories are considered. The generalized eigenvalue problem is formulated and solved to obtain the modal characteristics of the composite pipe. The developed wavelet-based finite element discretization scheme utilizes significantly less elements compared to the conventional finite element method for modeling composite pipes. Numerical solutions are obtained to demonstrate the accuracy of the developed element, which is verified by comparisons with some available results in the literature.

  10. A novel tetrahedal element for static and dynamic analysis of laminated composites

    Energy Technology Data Exchange (ETDEWEB)

    Jones, I A; Ruijter, W; Long, A C, E-mail: arthur.jones@nottingham.ac.u, E-mail: woutruijter@gmail.co, E-mail: andrew.long@nottingham.ac.u [Division of Materials, Mechanics and Structures, Faculty of Engineering, University of Nottingham, University Park, Nottingham NG7 2RD (United Kingdom)

    2009-08-01

    This paper presents a novel approach to formulating finite elements for modelling laminated composites. Most FE systems provide laminated composite elements based upon layered shell elements and some provide layered brick elements, but these require a hexahedral mesh which is difficult to generate for arbitrary geometries. This paper describes a tetrahedral element based on the concept of an equivalent graded material whose properties vary smoothly (rather than stepwise) and whose global behaviour replicates that of the laminate. This allows the possibility of automatically-generated models involving laminated composite behaviour. The element requires a non-standard integration system, and is presented for the cases of elastic, thermoelastic and dynamic behaviour.

  11. Hydrochemistry (major and trace elements of Lake Malawi (Nyasa, Tanzanian Northern Basin: local versus global considerations

    Directory of Open Access Journals (Sweden)

    P. Branchu

    2010-07-01

    Full Text Available This paper presents the first inventory of dissolved minor and trace element (F, Al, Fe, Mn, Ba, Cd, Cr, Cu, Pb, Mo, Bi, Sr, Zn concentrations in Lake Malawi, the second largest African lake. Sampling was carried out during 1993 dry season in the northern part of the lake. Trace metal concentrations were measured, together with Ca, Mg, Na, K, Cl, SO4, Alkalinity and Si, along three profiles in the lake northern extremity, in five tributaries and two on-land hydrothermal springs. Water profiles show similar elemental distributions and concentrations that are influenced by lake physical-chemical stratification. Stratification, assessed using temperature, conductivity, Si and Mn profiles, is characterised by two boundaries: the thermocline (70–90 m and the oxicline (150–190 m. Elemental water concentrations are discussed using simple covariance analyse. Epilimnetic concentrations and distribution are also influenced by atmospheric deposition and river diving. Comparison of dissolved concentrations for potentially polluting elements with World Health Organisation Guidelines and those reported for other East African lakes shows that this reservoir is uncontaminated despite an increasing human stress. Major element behaviour is assessed through a 3 boxes model. In this model Cl and K are conservative elements whereas Si is removed from the solution by diatom productivity and sedimentation. Ca, Na, Mg and alkalinity show low reactivity. Evaporation is one of the controlling factors of lake element concentration that superimposes on the watershed control. Hydrothermal activity, not evidenced in the lake, controls the chemistry of one of the main northern tributary. Chemical comparison between Northern rivers and other tributaries characterises the geographical and geological specificity of studied northern watershed. Moreover the lake annual chemical budget shows that northern watershed generates the main elemental input to the lake

  12. Effect of duct obstruction on structure, elemental composition, and function of rat submandibular glands

    Energy Technology Data Exchange (ETDEWEB)

    Sagstroem, S.S.; Sagulin, G.B.; Roomans, G.M. (Univ. of Uppsala (Sweden))

    1989-06-01

    Obstruction of salivary glands occurs in association with a number of pathological conditions. It has been suggested that the major changes found in the salivary glands of patients with cystic fibrosis are due to obstruction of the excretory duct by viscous mucus. In the present study, the effect of excretory duct obstruction on structure, elemental composition and function of rat submandibular gland was investigated. Obstruction was effected by infusion of a fast-hardening protein emulsion in the main excretory duct. After 1 week, and more pronounced after 2 weeks of obstruction the number of granular duct cells had decreased in the obstructed gland. X-ray microanalysis showed an increase in Mg, Ca and K, and a decrease in Na levels in the acinar cells, compared to normal glands. The contralateral glands apparently underwent compensatory hypertrophy and showed a similar pattern of changes in elemental composition. The composition of pilocarpine-induced submandibular saliva was neither in the obstructed nor in the contralateral gland significantly different from that in control glands. However, the flow rate was somewhat lower. Hence, increase in cellular Ca levels in submandibular gland acinar cells in cystic fibrosis could be secondary to duct obstruction, but the present study does not support the hypothesis that duct obstruction would result in changes in the composition of saliva.

  13. Major, trace element and isotope geochemistry (Sr-Nd-Pb) of interplinian magmas from Mt. Somma-Vesuvius (Southern Italy)

    Science.gov (United States)

    Somma, R.; Ayuso, R.A.; de Vivo, B.; Rolandi, G.

    2001-01-01

    compositions in the interplinian rocks show a tendency to become slightly more radiogenic with age, from the Protohistoric (143Nd/144Nd=0.51240-0.51247) to Ancient Historic (143Nd/144Nd=0.51245-0.51251). Medieval interplinian activity (143Nd/144Nd: 0.51250-0.51241) lacks meaningful internal trends. All the interplinian rocks have virtually homogeneous compositions of 207Pb/204Pb and 208Pb/204Pb in acid-leached residues (207Pb/204Pb ???15.633 to 15.687, 208Pb/204Pb ???38.947 to 39.181). Values of 206Pb/204Pb are very distinctive, however, and discriminate among the three interplinian cycles of activity (Protohistoric: 18.929-18.971, Ancient Historic: 19.018-19.088, Medieval: 18.964-19.053). Compositional trends of major, trace element and isotopic compositions clearly demonstrate strong temporal variations of the magma types feeding the Somma-Vesuvius activity. These different trends are unlikely to be related only to low pressure evolutionary processes, and reveal variations of parental melt composition. Geochemical data suggest a three component mixing scheme for the interplinian activity. These involve HIMU-type and DMM-type mantle and Calabrian-type lower crust. Interaction between these components has taken place in the source; however, additional quantitative constraints must be acquired in order to better discriminate between magma characteristics inherited from the sources and those acquired during shallow level evolution.

  14. 60 Myr records of major elements and Pb-Nd isotopes from hydrogenous ferromanganese crusts: Reconstruction of seawater paleochemistry

    Science.gov (United States)

    Frank, M.; O'Nions, R. K.; Hein, J.R.; Banakar, V.K.

    1999-01-01

    We compare the time series of major element geochemical and Pb- and Nd-isotopic composition obtained for seven hydrogenous ferromanganese crusts from the Atlantic, Indian, and Pacific Oceans which cover the last 60 Myr. Average crust growth rates and age-depth relationships were determined directly for the last about 10 Myr using 10Be/9Be profiles. In the absence of other information these were extrapolated to the base of the crusts assuming constant growth rates and constant initial 10Be/9Be ratios due to the lack of additional information. Co contents have also been used previously to estimate growth rates in Co-rich Pacific and Atlantic seamount crusts (Puteanus and Halbach, 1988). A comparison of 10Be/9Be- and Co-based dating of three Co-rich crusts supports the validity of this approach and confirms the earlier chronologies derived from extrapolated 10Be/9Be-based growth rates back to 60 Ma. Our data show that the flux of Co into Co-poor crusts has been considerably lower. The relationship between growth rate and Co content for the Co-poor crusts developed from these data is in good agreement with a previous study of a wider range of marine deposits (Manheim, 1986). The results suggest that the Co content provides detailed information on the growth history of ferromanganese crusts, particularly prior to 10-12 Ma where the 10Be-based method is not applicable. The distributions of Pb and Nd isotopes in the deep oceans over the last 60 Myr are expected to be controlled by two main factors: (a) variations of oceanic mixing patterns and flow paths of water masses with distinct isotopic signatures related to major paleogeographic changes and (b) variability of supply rates or provenance of detrital material delivered to the ocean, linked to climate change (glaciations) or major tectonic uplift. The major element profiles of crusts in this study show neither systematic features which are common to crusts with similar isotope records nor do they generally show

  15. Geochemical behavior of rare-earth elements and other major and minor elements in sound-producing and silent beach sands in Japan

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The major element composition of sound-producing sand is reported together with rare-earth elements (REE) and other selected elements for the first time. Rare-earth element concentrations in beach sands from Miyagi and Tottori in Japan were determined by induction-coupled, argon-plasma spectrometry (ICP-MS) to characterize the REE of sound-producing and silent sands relative to the parental rocks. Sound-producing sand beaches are very common and all over in Japan: five beaches in Miyagi and 2 in Tottori are selected with other silent sand beaches in the areas. Both sound-producing sand and silent sand samples from Miyagi and Tottori contain more than 60wt% of SiO2 and are composed mainly of quartz and feldspar. Miyagi sand samples are characterized by light REE enrichment and flat chondrite-normalized patterns that are similar to those of local source sandstone. However, all sand samples from Miyatojima in Miyagi show positive Eu anomalies, a characteristic feature not shown in other sand samples from Miyagi. Tottori sand samples also are characterized by high REE contents and remarkable positive Eu anomalies. The sands containing lower REE contents are due to high quartz and feldspar contents. Miyatojima sand samples and Tottori sand samples have high REE contents and show remarkable positive Eu anomalies due to the presence of feldspar.The best results are obtained using all of the geological methods and the Principal Component Analysis (PCA) as a measure of the similarity between sound-producing sand and silent sand. The difference between sound-producing sand and silent sand is obtained from the PCA results.

  16. Morphology and Elemental Composition of Recent and Fossil Cyanobacteria

    Science.gov (United States)

    SaintAmand, Ann; Hoover, Richard B.; Jerman, Gregory; Rozanov, Alexei Yu.

    2005-01-01

    Cyanobacteria (cyanophyta, cyanoprokaryota, and blue-green algae) are an ancient, diverse and abundant group of photosynthetic oxygenic microorganisms. Together with other bacteria and archaea, the cyanobacteria have been the dominant life forms on Earth for over 3.5 billion years. Cyanobacteria occur in some of our planets most extreme environments - hot springs and geysers, hypersaline and alkaline lakes, hot and cold deserts, and the polar ice caps. They occur in a wide variety of morphologies. Unlike archaea and other bacteria, which are typically classified in pure culture by their physiological, biochemical and phylogenetic properties, the cyanobacteria have historically been classified based upon their size and morphological characteristics. These include the presence or absence of heterocysts, sheath, uniseriate or multiseriate trichomes, true or false branching, arrangement of thylakoids, reproduction by akinetes, binary fission, hormogonia, fragmentation, presence/absence of motility etc. Their antiquity, distribution, structural and chemical differentiation, diversity, morphological complexity and large size compared to most other bacteria, makes the cyanobacteria ideal candidates for morphological biomarkers in returned Astromaterials. We have obtained optical (nomarski and phase contrast)/fluorescent (blue and green excitation) microscopy images using an Olympus BX60 compound microscope and Field Emission Scanning Electron Microscopy images and EDAX elemental compositions of living and fossil cyanobacteria. The S-4000 Hitachi Field Emission Scanning Electron Microscope (FESEM) has been used to investigate microfossils in freshly fractured interior surfaces of terrestrial rocks and the cells, hormogonia, sheaths and trichomes of recent filamentous cyanobacteria. We present Fluorescent and FESEM Secondary and Backscattered Electron images and associated EDAX elemental analyses of recent and fossil cyanobacteria, concentrating on representatives of the

  17. Morphology and elemental composition of recent and fossil cyanobacteria

    Science.gov (United States)

    St. Amand, Ann; Hoover, Richard B.; Jerman, Gregory A.; Coston, James; Rozanov, Alexei Y.

    2005-09-01

    Cyanobacteria (cyanophyta, cyanoprokaryota, and blue-green algae) are an ancient, diverse and abundant group of photosynthetic oxygenic microorganisms. Together with other bacteria and archaea, the cyanobacteria have been the dominant life forms on Earth for over 3.5 billion years. Cyanobacteria occur in some of our planets most extreme environments - hot springs and geysers, hypersaline and alkaline lakes, hot and cold deserts, and the polar ice caps. They occur in a wide variety of morphologies. Unlike archaea and other bacteria, which are typically classified in pure culture by their physiological, biochemical and phylogenetic properties, the cyanobacteria have historically been classified based upon their size and morphological characteristics. These include the presence or absence of heterocysts, sheath, uniseriate or multiseriate trichomes, true or false branching, arrangement of thylakoids, reproduction by akinetes, binary fission, hormogonia, fragmentation, presence/absence of motility etc. Their antiquity, distribution, structural and chemical differentiation, diversity, morphological complexity and large size compared to most other bacteria, makes the cyanobacteria ideal candidates for morphological biomarkers in returned Astromaterials. We have obtained optical (nomarski and phase contrast)/fluorescent (blue and green excitation) microscopy images using an Olympus BX60 compound microscope and Field Emission Scanning Electron Microscopy images and EDAX elemental compositions of living and fossil cyanobacteria. The S-4000 Hitachi Field Emission Scanning Electron Microscope (FESEM) has been used to investigate microfossils in freshly fractured interior surfaces of terrestrial rocks and the cells, hormogonia, sheaths and trichomes of recent filamentous cyanobacteria. We present Fluorescent and FESEM Secondary and Backscattered Electron images and associated EDAX elemental analyses of recent and fossil cyanobacteria, concentrating on representatives of the

  18. Age and whole rock glass compositions of proximal pyroclastics from the major explosive eruptions of Somma-Vesuvius: A review as a tool for distal tephrostratigraphy

    Science.gov (United States)

    Santacroce, Roberto; Cioni, Raffaello; Marianelli, Paola; Sbrana, Alessandro; Sulpizio, Roberto; Zanchetta, Giovanni; Donahue, Douglas J.; Joron, Jean Louis

    2008-10-01

    A review of compositional data of the major explosive eruptions of Vesuvius is presented, comparing compositions (major elements) of whole rock with glass shards from the proximal deposits, hopefully useful for long-distance correlation. A critical review of published and new geochronological data is also provided. All available 14C ages are calibrated to give calendar ages useful for the reconstruction of the volcanological evolution of the volcanic complex. The pyroclastic deposits of the four major Plinian eruptions (22,000 yr cal BP "Pomici di Base", 8900 yr cal BP "Mercato Pumice", 4300 yr cal BP "Avellino Pumice", and A.D. 79 "Pompeii Pumice") are widely dispersed and allow a four-folded, Plinian to Plinian, stratigraphic division: 1. B-M (between Pomici di Base and Mercato); 2. M-A (between Mercato and Avellino); 3. A-P (between Avellino and Pompeii); 4. P-XX (from the Pompeii Pumice to the last erupted products of the XXth century). Within each interval, the age, lithologic and compositional features of pyroclastic deposits of major eruptions, potentially useful for tephrostratigraphic purposes on distal areas, are briefly discussed. The Vesuvius rocks are mostly high Potassic products, widely variable in terms of their silica saturation. They form three groups, different for both composition and age: 1. slightly undersaturated, older than Mercato eruption; 2. mildly undersaturated, from Mercato to Pompeii eruptions; 3. highly undersaturated, younger than Pompeii eruption. For whole rock analyses, the peculiar variations in contents of some major and trace elements as well as different trends in element/element ratios, allow a clear, unequivocal, easy diagnosis of the group they belong. Glass analyses show large compositional overlap between different groups, but selected element vs. element plots are distinctive for the three groups. The comparative analysis of glass and whole rock major element compositions provides reliable geochemical criteria helping

  19. Finite element simulations of thin-film composite BAW resonators.

    Science.gov (United States)

    Makkonen, T; Holappa, A; Ellä, J; Salomaa, M M

    2001-09-01

    A finite element method (FEM) formulation is presented for the numerical solution of the electroelastic equations that govern the linear forced vibrations of piezoelectric media. A harmonic time dependence is assumed. Both of the approaches, that of solving the field problem (harmonic analysis) and that of solving the corresponding eigenvalue problem (modal analysis), are described. A FEM software package has been created from scratch. Important aspects central to the efficient implementation of FEM are explained, such as memory management and solving the generalized piezoelectric eigenvalue problem. Algorithms for reducing the required computer memory through optimization of the matrix profile, as well as Lanczos algorithm for the solution of the eigenvalue problem are linked into the software from external numerical libraries. Our FEM software is applied to detailed numerical modeling of thin-film bulk acoustic wave (BAW) composite resonators. Comparison of results from 2D and full 39 simulations of a resonator are presented. In particular, 3D simulations are used to investigate the effect of the top electrode shape on the resonator electrical response. The validity of the modeling technique is demonstrated by comparing the simulated and measured displacement profiles at several frequencies. The results show that useful information on the performance of the thin-film resonators can be obtained even with relatively coarse meshes and, consequently, moderate computational resources.

  20. Source characterization studies at the Paraho semiworks oil shale retort. [Redistribution of trace and major elements

    Energy Technology Data Exchange (ETDEWEB)

    Fruchter, J.S.; Wilkerson, C.L.; Evans, J.C.; Sanders, R.W.; Abel, K.W.

    1979-05-01

    In order to determine the redistribution of trace and major elements and species during aboveground oil shale retorting, a comprehensive program was carried out for the sampling and analysis of feedstock, products, effluents, and ambient particulates from the Paraho Semiworks Retort. Samples were obtained during two periods in 1977 when the retort was operating in the direct mode. The data were used to construct mass balances for 31 trace and major elements in various effluents, including the offgas. The computed mass balances indicated that approx. 1% or greater fractions of the As, Co, Hg, N, Ni, S, and Se were released during retorting and redistributed to the product oil, retort water, or product offgas. The fraction released for these seven elements ranged from approx. 1% for Co and Ni to 50 to 60% for Hg and N. Approximately 20% of the S and 5% each of the As and Se were released. Ambient aerosols were found to be elevated near the retorting facility and associated crushing and retorted shale disposal sites. Approximately 50% of these particles were in the respirable range (< 5 ..mu..m). The elevated dust loadings are presented very local, as indicated by relatively low aerosol loadings at background sites 100 to 200 m away. State-of-the-art dust control measures were not employed. 15 figures, 19 tables.

  1. COMPOSITION OF MAJOR ORGANIC ACIDS IN VEGETABLES AND SPICES

    Directory of Open Access Journals (Sweden)

    Liga Priecina

    2015-09-01

    Full Text Available Organic acids are one of the major phytochemicals in vegetables and responsible for food taste and odor. Different organic acids are analyzed in fruits and cereals, but least in vegetables and spices. Organic acids has been analyzed because of their high importance in the formation of other phytochemical and increased antioxidant activity. The aim of the current research was to determine the oxalic, tartaric, quinic, malic, malonic, ascorbic, citric, fumaric, succinic, salicylic and benzoic acid content in fresh and pre-treated (with steam vegetables and spices using high performance liquid chromatography (HPLC method. Major organic acids in highest concentrations in spices and vegetables are quinic, malic, malonic and citric acids. Spices contain higher total organic acid content than vegetables. Using steaming as pre-treatment, some of the organic acids content significantly decreased. Obtained changes could be explained by the organic acid formation into more complex chemicals in food or metabolic process. For the future, these changes will be combined with individual phenolic compound changes in analyzed samples.

  2. Elemental X-ray mapping of agglutinated foraminifer tests: a non- destructive technique for determining compositional characteristics.

    Science.gov (United States)

    Commeau, R.F.; Reynolds, Leslie A.; Poag, C.W.

    1985-01-01

    The composition of agglutinated foraminiferal tests vary remarkably in response to local substrate characteristics, physiochemical properties of the water column and species- dependant selectivity of test components. We have employed a technique that combines a scanning electron microscope with an energy dispersive X-ray spectrometer system to identify major and minor elemental constituents of agglutinated foraminiferal walls. As a sample is bombarded with a beam of high energy electrons, X-rays are generated that are characteristic of the elements present. As a result, X- ray density maps can be produced for each of several elements present in the tests of agglutinated foraminifers. -Authors

  3. Diffusion of major and trace elements in natural silicate melts as a tool to investigate timescales in magma mixing

    Science.gov (United States)

    González-García, Diego; Zezza, Angela; Behrens, Harald; Vetere, Francesco; Petrelli, Maurizio; Morgavi, Daniele; Perugini, Diego

    2016-04-01

    New melt injection into a shallow magma chamber is regarded as one of the potential triggers for explosive volcanic eruptions. Chemical diffusion occurring between the two mixing melts is a time-dependent process, and thus has the potential to shed light on the timescales involved in magma mixing events leading to an eruption. In order to achieve this, a complete database of diffusion coefficients in natural melts is a necessary prerequisite. We have carried out a set of 12 diffusion couple experiments in order to determine diffusion coefficients (D) of major and trace elements in two natural silicate melts. Two end-members from the Vulcano island (Aeolian archipelago, Italy) have been chosen for the experiments: a shoshonite (Vulcanello lava platform) and a rhyolitic obsidian (Pietre Cotte lava flow, La Fossa cone). Glasses from each end-member with added water contents of 0 wt%, 1 wt% and 2 wt% were produced in an Internally Heated Pressure Vessel (IHPV). Two glass cylinders with similar water content but different base composition are inserted in Au-Pd capsules and experiments are run in the IHPV at 1200° C with pressure from 0.5 to 3 kbar. Experiment capsules are rapidly quenched and analyzed by FTIR, EPMA and LA-ICP-MS for H2O, major and trace elements, respectively, along 2 mm linear profiles extending across the interface. A Boltzmann-Matano approach is used to obtain concentration-dependent diffusivities. The obtained concentration-distance profiles are asymmetric and extend deeper into the shoshonite relative to the rhyolite, indicating that diffusion is slower in the latter. Results show that diffusivities are notably accelerated by the presence of H2O in the melt. Experiments performed by using water-free glass show diffusivities one order of magnitude lower compared to glasses containing up to 2 wt% H2O. The effect of pressure, in the investigated range, is negligible and falls within measurement error. Among major elements, Si and Ti are the slowest

  4. Analysis of elemental composition of porcelains unearthed from Waguantan kiln site by PIXE–RBS

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Z. [Key Laboratory of Radiation Physics and Technology of Ministry of Education, Institute of Nuclear Science and Technology, Sichuan University, Chengdu 610064 (China); Zhang, K. [School of History and Culture, Sichuan University, Chengdu 610064 (China); Xia, C.D.; Liu, M.T.; Zhu, J.J. [Key Laboratory of Radiation Physics and Technology of Ministry of Education, Institute of Nuclear Science and Technology, Sichuan University, Chengdu 610064 (China); An, Z., E-mail: anzhu@scu.edu.cn [Key Laboratory of Radiation Physics and Technology of Ministry of Education, Institute of Nuclear Science and Technology, Sichuan University, Chengdu 610064 (China); Bai, B., E-mail: baibin@scu.edu.cn [School of History and Culture, Sichuan University, Chengdu 610064 (China)

    2015-03-01

    Highlights: •We analyzed 61 unearthed porcelain shards in Yuan Dynasty by PIXE–RBS. •An electron gun was installed to solve the electric charge accumulations. •The factor analysis was performed for the element compositions. •The “exotic group” porcelain samples unearthed were produced locally. -- Abstract: A method combining proton-induced X-ray emission spectrometry (PIXE) and Rutherford backscattering spectrometry (RBS) was used to determine the composition of 61 porcelain shards from the Yuan Dynasty (1271–1368 A.D.) unearthed from the Waguantan kiln site at Tianzhu County in Guizhou Province, China. Based on our previous experimental setup, an electron gun device with a LaB{sub 6} crystal cathode was installed to solve the problem created when the incident proton beams generated electric charge accumulations on the surfaces of the insulating porcelain samples, which induced a large bremsstrahlung background. The use of the electron gun has largely eliminated the large bremsstrahlung background and has therefore improved the detection limits for elements, especially for trace elements, and made it possible to determine the origin of the porcelains based on the trace elements. Major and trace elemental compositions of the porcelain bodies and glazes measured by PIXE and RBS were analyzed by the factor analysis method. The factor analysis showed that a few pieces of porcelain with a style similar to the porcelain of the Longquan kiln among the unearthed porcelains from the Waguantan kiln site did not have obvious differences in elemental compositions from other remaining porcelains unearthed from the Waguantan kiln site, indicating that the pieces of unearthed porcelain with the Longquan kiln style did in fact belong to the product fired locally by imitating the model of the Longquan celadon with local raw materials. This result therefore indicated that the Longquan kiln technology that originated from the Five Dynasties (907–960 A.D.) had been

  5. Major- and trace-element concentrations in soils from two continental-scale transects of the United States and Canada

    Science.gov (United States)

    Smith, David B.; Cannon, William F.; Woodruff, Laurel G.; Garrett, Robert G.; Klassen, Rodney; Kilburn, James E.; Horton, John D.; King, Harley D.; Goldhaber, Martin B.; Morrison, Jean M.

    2005-01-01

    This report contains major- and trace-element concentration data for soil samples collected from 265 sites along two continental-scale transects in North America. One of the transects extends from northern Manitoba to the United States-Mexico border near El Paso, Tex. and consists of 105 sites. The other transect approximately follows the 38th parallel from the Pacific coast of the United States near San Francisco, Calif., to the Atlantic coast along the Maryland shore and consists of 160 sites. Sampling sites were defined by first dividing each transect into approximately 40-km segments. For each segment, a 1-km-wide latitudinal strip was randomly selected; within each strip, a potential sample site was selected from the most representative landscape within the most common soil type. At one in four sites, duplicate samples were collected 10 meters apart to estimate local spatial variability. At each site, up to four separate soil samples were collected as follows: (1) material from 0-5 cm depth; (2) O horizon, if present; (3) a composite of the A horizon; and (4) C horizon. Each sample collected was analyzed for total major- and trace-element composition by the following methods: (1) inductively coupled plasmamass spectrometry (ICP-MS) and inductively coupled plasma-atomic emission spectrometry (ICPAES) for aluminum, antimony, arsenic, barium, beryllium, bismuth, cadmium, calcium, cerium, cesium, chromium, cobalt, copper, gallium, indium, iron, lanthanum, lead, lithium, magnesium, manganese, molybdenum, nickel, niobium, phosphorus, potassium, rubidium, scandium, silver, sodium, strontium, sulfur, tellurium, thallium, thorium, tin, titanium, tungsten, uranium, vanadium, yttrium, and zinc; (2) cold vapor- atomic absorption spectrometry for mercury; (3) hydride generation-atomic absorption spectrometry for antimony and selenium; (4) coulometric titration for carbonate carbon; and (5) combustion for total carbon and total sulfur.

  6. Finite Element Simulation of Low Velocity Impact Damage on an Aeronautical Carbon Composite Structure

    Science.gov (United States)

    Lemanle Sanga, Roger Pierre; Garnier, Christian; Pantalé, Olivier

    2016-06-01

    Low velocity barely visible impact damage (BVID) in laminated carbon composite structures has a major importance for aeronautical industries. This contribution leads with the development of finite element models to simulate the initiation and the propagation of internal damage inside a carbon composite structure due by a low velocity impact. Composite plates made from liquid resin infusion process (LRI) have been subjected to low energy impacts (around 25 J) using a drop weight machine. In the experimental procedure, the internal damage is evaluated using an infrared thermographic camera while the indentation depth of the face is measured by optical measurement technique. In a first time we developed a robust model using homogenised shells based on degenerated tri-dimensional brick elements and in a second time we decided to modelize the whole stacking sequence of homogeneous layers and cohesive interlaminar interfaces in order to compare and validate the obtained results. Both layer and interface damage initiation and propagation models based on the Hashin and the Benzeggagh-Kenane criteria have been used for the numerical simulations. Comparison of numerical results and experiments has shown the accuracy of the proposed models.

  7. First Kinetic Reactive-Flow and Melting Calculations for Entropy Budget and Major Elements in Heterogeneous Mantle Lithologies (Invited)

    Science.gov (United States)

    Asimow, P. D.

    2009-12-01

    The consequences of source heterogeneity and reactive flow during melt transport in the mantle can be classified by scale. At the smallest spatial and longest temporal scales, we can assume complete equilibrium and use batch melting of homogenized sources or equilibrium porous flow treatments. At large enough spatial scale or short enough temporal scale to prevent any thermal or chemical interaction between heterogeneities or between melt and matrix, we can assume perfectly fractional melting and transport and apply simple melt-mixing calculations. At a somewhat smaller spatial or longer temporal scale, thermal but not chemical interactions are significant and various lithologies and channel/matrix systems must follow common pressure-temperature paths, with energy flows between them. All these cases are tractable to model with current tools, whether we are interested in the energy budget, major elements, trace elements, or isotopes. There remains, however, the very important range of scales where none of these simple theories applies because of partial chemical interaction among lithologies or along the flow path. Such disequilibrium or kinetic cases have only been modeled, in the case of mantle minerals and melts, for trace elements and isotopes, with fixed melting rates instead of complete energy budgets. In order to interpret volumes of magma production and major element basalt and residue compositions that might emerge from a heterogeneous mantle in this last range of scales, we must develop tools that can combine a kinetic formulation with a major element and energy-constrained thermodynamic calculation. The kinetics can be handled either with a chemical kinetic approach with rate constants for various net transfer and exchange reactions, or with a physical diffusion-limited approach. A physical diffusion-limited approach can be built with the following elements. At grain scale, spherical grains of an arbitrary number of solid phases can evolve zoning profiles

  8. Major and trace element partitioning between dissolved and particulate phases in Antarctic surface snow.

    Science.gov (United States)

    Grotti, M; Soggia, F; Ardini, F; Magi, E

    2011-09-01

    In order to provide a new insight into the Antarctic snow chemistry, partitioning of major and trace elements between dissolved and particulate (i.e. insoluble particles, >0.45 μm) phases have been investigated in a number of coastal and inland snow samples, along with their total and acid-dissolvable (0.5% nitric acid) concentrations. Alkaline and alkaline-earth elements (Na, K, Ca, Mg, Sr) were mainly present in the dissolved phase, while Fe and Al were predominantly associated with the particulate matter, without any significant difference between inland and coastal samples. On the other hand, partitioning of trace elements depended on the sampling site position, showing a general decrease of the particulate fraction by moving from the coast to the plateau. Cd, Cu, Pb and Zn were for the most part in the dissolved phase, while Cr was mainly associated with the particulate fraction. Co, Mn and V were equally distributed between dissolved and particulate phases in the samples collected from the plateau and preferentially associated with the particulate in the coastal samples. The correlation between the elements and the inter-sample variability of their concentration significantly decreased for the plateau samples compared to the coastal ones, according to a change in the relative contribution of the metal sources and in good agreement with the estimated marine and crustal enrichment factors. In addition, samples from the plateau were characterised by higher enrichment factors of anthropogenic elements (Cd, Cr, Cu, Pb and Zn), compared to the coastal area. Finally, it was observed that the acid-dissolvable metal concentrations were generally lower than the total concentration values, showing that the acid treatment can dissolve only a given fraction of the metal associated with the particulate (<20% for iron and aluminium).

  9. Composition and Trace Element Content of Coal in Taiwan

    Institute of Scientific and Technical Information of China (English)

    蔡龙贻

    2002-01-01

    Researches on trace elements in coal and their influence on environment and human health were introduced. Some 4 coal samples were taken from Taiwan to test the content of trace elements. The author holds that a further study is needed for understanding the modes of occurrence of elements during the deposition and coalification stage in the studying area.

  10. Element composition of biota, water and sediment in the Forsmark area, Baltic Sea. Concentrations, bioconcentration factors and partitioning coefficients (K{sub d}) of 48 elements

    Energy Technology Data Exchange (ETDEWEB)

    Kumblad, Linda; Bradshaw, Clare (Dept. of Systems Ecology, Stockholm Univ. (Sweden))

    2008-08-15

    In this study the elemental composition of biota, water and sediment from a shallow bay in the Forsmark region have been determined. The report presents data for 48 different elements (Al, As, Ba, Br, C, Ca, Cd, Ce, Cl, Co, Cr, Cs, Cu, Dy, Er, Eu, F, Fe, Gd, Hg, Ho, I, K, Li, Lu, Mg, Mn, N, Na, Nd, Ni, P, Pb, Pr, Ra, Rb, S, Se, Si, Sm, Tb, Th, Ti, Tm, V, Yb, Zn, Zr) in all major functional groups of the coastal ecosystem (phytoplankton, zooplankton, benthic microalgae, macroalgae, macrophytes, benthic herbivores, benthic filter feeders, benthic detrivores, planktivorous fish, benthic omnivorous fish, carnivorous fish, dissolved and particulate matter in the water and the sediment) during spring 2005. The overall aim of the study is to contribute to a better understanding of ecological properties and processes that govern uptake and transfer of trace elements, heavy-metals, radionuclides and other non-essential elements/contaminants in coastal environments of the Baltic Sea. In addition, the data was collected to provide site-specific Bioconcentration Factors (BCF), Biomagnification Factors (BMF), partitioning coefficients (K{sub d}) and element ratios (relative to carbon) for use in ongoing SKB safety assessments. All these values, as well as the element concentration data from which they are derived, are presented here. As such, this is mainly a data report, although initial interpretations of the data also are presented and discussed. Reported data include element concentrations, CNP-stoichiometry, and multivariate data analysis. Elemental concentrations varied greatly between organisms and environmental components, depending on the function of the elements, and the habitat, ecosystem function, trophic level and morphology (taxonomy) of the organisms. The results show for instance that food intake and metabolism strongly influence the elemental composition of organisms. The three macrophytes had quite similar elemental composition (despite their taxonomic

  11. Total elemental composition of soils contaminated with wastewater irrigation by combining IBA techniques

    Energy Technology Data Exchange (ETDEWEB)

    Huerta, L. E-mail: lazaro@fisica.unam.mx; Contreras-Valadez, R.; Palacios-Mayorga, S.; Miranda, J.; Calva-Vasquez, G

    2002-04-01

    The purpose of this work was to obtain the total elemental composition of agricultural soils irrigated with well water and wastewater. The studied area is located in the Valle del Mezquital in Hidalgo State, Mexico. The studied soils were collected, every two months during one year. Particle induced X-ray emission (PIXE), Rutherford backscattering spectrometry (RBS) and nuclear reaction analysis (NRA) were applied for elemental analysis. PIXE analyses gave elemental contents of major and trace elements (Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Br, Rb, Sr, Y, Zr, and Pb). Total concentrations of Na, Mg, C, N and O were obtained by RBS and NRA. PIXE analyses were carried out with 2 MeV proton beams, RBS with 2 MeV helium ions, while NRA was applied with a 1.2 MeV deuterium beam. Results indicated that heavy metal total concentrations exceed the critical soil total concentrations according to environmental regulations.

  12. Trace and major element pollution originating from coal ash suspension and transport processes

    Energy Technology Data Exchange (ETDEWEB)

    Popovic, A.; Djordjevic, D.; Polic, P. [University of Belgrade, Belgrade (Yugoslavia). Faculty of Science, Dept. of Chemistry

    2001-07-01

    Coal ash obtained from Nikola Tesla A power plant in Obrenovac, near Belgrade, Yugoslavia, is mixed with water of the Sava river and transported to the dump. In order to assess pollution caused by leaching of some minor and major elements during ash transport through the pipeline, two sets of samples (six samples each) were subjected to a modified sequential extraction. The first set consisted of coal ash samples taken immediately after combustion, while the second set was obtained by extraction with river water, imitating the processes that occur in the pipeline. Samples were extracted consecutively with distilled water and a 1 M solution of KCl, pH 7, and the differences in extractability were compared in order to predict potential pollution. It is concluded that lead and cadmium do not present an environmental threat during and immediately after ash transport to the dump. Portions of zinc, nickel and chromium are released during the ash transport, and arsenic and manganese are released continuously. Copper and iron do not present an environmental threat due to element leaching during and immediately after the coal ash suspension and transport. On the contrary, these elements, as well as chromium, become concentrated during coal ash transport. Adsorbed portions of calcium, magnesium and potassium are also leached during coal ash transport.

  13. Silica-poor, mafic alkaline lavas from ocean islands and continents: Petrogenetic constraints from major elements

    Indian Academy of Sciences (India)

    Shantanu Keshav; Gudmundur H Gudfinnsson

    2004-12-01

    Strongly silica-poor (ne-normative), mafic alkaline lavas generally represented by olivine nephelinites, nephelinites, melilitites, and olivine melilitites have erupted at various locations during Earth’s history. On the basis of bulk-rock Mg#, high concentrations of Na2O, TiO2, and K2O, and trace element geochemistry, it has been suggested that these lavas represent low-degree melts that have undergone little crystal fractionation en route to the surface. Many of these lavas also carry highpressure mantle material in the form of harzburgite, spinel lherzolite, and variants of websterite xenoliths, and rare garnet-bearing xenoliths. However, phenocryst phases instead indicate that these magmas cooled to variable extents during their passage. We note subtle, yet important, differences in terms of CaO, Al2O3, CaO/Al2O3, and CaO/MgO. High-pressure experimental melting studies in CMAS-CO3 (3–8GPa) and natural lherzolitic systems (3GPa) demonstrate that at an isobar increasing leads to a moderate decrease in CaO + MgO, whereas CaO/MgO and CaO/Al2O3 sharply decrease. Relatively high CaO/Al2O3 indicates melting in the presence of garnet (≥ 85km). Studies also demonstrate that CO2-bearing lherzolitic systems, when compared with anhydrous ones, also have higher CaO content in the coexisting melt at a given and . Comparison of the bulk-rock major-element chemistry of silica-poor, mafic alkaline lavas with experimentally determined high-pressure melts indicates that melting of anhydrous mantle lherzolite or garnet pyroxenite is not able to explain many of the major element systematics of the lavas. However, high-pressure partial melts of carbonated lherzolite have the right major element trends. Among ocean islands, lavas from Samoa and Hawaii are perhaps the products of very low degree of partial melting. Lavas from Gran Canaria and Polynesia represent products of more advanced partial melting. On continents, lavas from South Africa and certain localities in

  14. Elemental compositions of comet 81P/Wild 2 samples collected by Stardust.

    Science.gov (United States)

    Flynn, George J; Bleuet, Pierre; Borg, Janet; Bradley, John P; Brenker, Frank E; Brennan, Sean; Bridges, John; Brownlee, Don E; Bullock, Emma S; Burghammer, Manfred; Clark, Benton C; Dai, Zu Rong; Daghlian, Charles P; Djouadi, Zahia; Fakra, Sirine; Ferroir, Tristan; Floss, Christine; Franchi, Ian A; Gainsforth, Zack; Gallien, Jean-Paul; Gillet, Philippe; Grant, Patrick G; Graham, Giles A; Green, Simon F; Grossemy, Faustine; Heck, Philipp R; Herzog, Gregory F; Hoppe, Peter; Hörz, Friedrich; Huth, Joachim; Ignatyev, Konstantin; Ishii, Hope A; Janssens, Koen; Joswiak, David; Kearsley, Anton T; Khodja, Hicham; Lanzirotti, Antonio; Leitner, Jan; Lemelle, Laurence; Leroux, Hugues; Luening, Katharina; Macpherson, Glenn J; Marhas, Kuljeet K; Marcus, Matthew A; Matrajt, Graciela; Nakamura, Tomoki; Nakamura-Messenger, Keiko; Nakano, Tsukasa; Newville, Matthew; Papanastassiou, Dimitri A; Pianetta, Piero; Rao, William; Riekel, Christian; Rietmeijer, Frans J M; Rost, Detlef; Schwandt, Craig S; See, Thomas H; Sheffield-Parker, Julie; Simionovici, Alexandre; Sitnitsky, Ilona; Snead, Christopher J; Stadermann, Frank J; Stephan, Thomas; Stroud, Rhonda M; Susini, Jean; Suzuki, Yoshio; Sutton, Stephen R; Taylor, Susan; Teslich, Nick; Troadec, D; Tsou, Peter; Tsuchiyama, Akira; Uesugi, Kentaro; Vekemans, Bart; Vicenzi, Edward P; Vincze, Laszlo; Westphal, Andrew J; Wozniakiewicz, Penelope; Zinner, Ernst; Zolensky, Michael E

    2006-12-15

    We measured the elemental compositions of material from 23 particles in aerogel and from residue in seven craters in aluminum foil that was collected during passage of the Stardust spacecraft through the coma of comet 81P/Wild 2. These particles are chemically heterogeneous at the largest size scale analyzed ( approximately 180 ng). The mean elemental composition of this Wild 2 material is consistent with the CI meteorite composition, which is thought to represent the bulk composition of the solar system, for the elements Mg, Si, Mn, Fe, and Ni to 35%, and for Ca and Ti to 60%. The elements Cu, Zn, and Ga appear enriched in this Wild 2 material, which suggests that the CI meteorites may not represent the solar system composition for these moderately volatile minor elements.

  15. Major and trace elements assessment in sediment samples from Rio Grande Reservoir, by neutron activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Franklin, Robson L.; Ferreira, Francisco J., E-mail: robsonf@cetesbnet.sp.gov.b [Companhia Ambiental do Estado de Sao Paulo(CETESB), Sao Paulo, SP (Brazil). Lab. de Quimica Inorganica e Radioatividade; Favaro, Deborah I.T., E-mail: defavaro@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), SP (Brazil). Lab. de Analise por Ativacao Neutronica; Bevilacqua, Jose Eduardo [Companhia Ambiental do Estado de Sao Paulo(CETESB), Sao Paulo, SP (Brazil). Div. de Qualidade das Aguas

    2009-07-01

    The Rio Grande Reservoir, Southeast of the Sao Paulo Metropolitan Area (SPMA) supplies water for four counties (Sao Bernardo do Campo, Sao Caetano do Sul, Santo Andre and Diadema). It has been seriously affected by urban expansion, due to chaotic urban occupation and improper use of the surrounding areas. In this study bottom sediment samples were collected, by using a Van Veen sampler, during the dry and rainy seasons. Four sampling points were defined by using GPS and are located at the mouth of the Rio Grande and Ribeirao Pires Rivers, in the middle of the reservoir and near the catchment point of the water supply. The sediment samples were submitted to instrumental neutron activation analysis (INAA) and the following elements were determined: As, Ba, Br, Co, Cr, Cs, Rb, Sb, Sc, Se, Ta, Th, U e Zn and the rare earth elements Ce, Eu, La, Lu, Nd, Sm, Tb, Yb. Short irradiation was also performed for total Hg determination by NAA using {sup 197}Hg radioisotope. This was possible due to the high Hg concentration levels in these sediments. The methodology validation was carried out by certified reference material analyses. The results obtained for multielemental concentrations in the sediment samples were compared to NASC (North American Shale Composite) values. The concentration values obtained for As and metals Cr, Hg and Zn in the sediment samples were compared to the Canadian Council of Minister of the Environment (CCME) oriented values (TEL and PEL values) and adopted by CETESB. (author)

  16. A Remote Laser-mass Spectrometer for Determination of Elemental Composition

    Science.gov (United States)

    Deyoung, R. J.; Situ, W.

    1993-01-01

    Determination of the elemental composition of lunar, asteroid, and planetary surfaces is a major concern for science and resource utilization of space. The science associated with the development of a satellite or lunar rover laser-mass spectrometer instrument is presented here. The instrument would include a pulsed laser with sufficient energy to create a plasma on a remote surface. Ions ejected from this plasma travel back to the spacecraft or rover, where they are analyzed by a time-of-flight mass spectrometer, giving the elemental and isotope composition. This concept is based on the LIMA-D instrument on board the former Soviet Union Phobos-88 spacecraft sent to Mars. A laser-mass spectrometer placed on a rover or satellite would substantially improve the data return over alternative techniques. The spatial resolution would be centimeters, and a complete mass spectrum could be achieved in one laser shot. An experiment is described that demonstrates these features. A 400 mj Nd:YAG laser is focused, to an intensity of 10(exp 11) w/sq cm, onto a Al, Ag, Cu, Ge, or lunar simulant target. A plasma forms from which ions are ejected. Some of these ions travel down an 18-m evacuated flight tube to a microchannel plate detector. Alternatively, the ions are captured by an ion trap where they are stored until pulsed into a 1-m time-of-flight mass spectrometer, giving the elemental composition of the remote surface. A television camera monitors the plasma plume shape, and a photodiode monitors the temporal plasma emission . With this system, ions of Al, Ag, Cu, Ge, and lunar simulant have been detected at 18 m. The mass spectrum from the ion trap and 1-m time-of-flight tube will be presented.

  17. Major, trace, and natural radioactive elements in bituminous coal from Australia, Romania, Russia, South Africa and Ukraine: A comparative study

    Energy Technology Data Exchange (ETDEWEB)

    Duliu, O.G.; Culicov, O.A.; Radulescu, I.; Cristea, C.; Vasiu, T. [University of Bucharest, Bucharest (Romania). Dept. of Atomic & Nuclear Physics

    2005-05-01

    Five samples of bituminous coal collected from different basins (Australia, Romania, Russia, South Africa and Ukraine) have been investigated by using different analytical techniques. Na, Mg, Al, Cl, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Br, Rb, Sr, Mo, Sn, In, Sb, Cs, Ba, La, Ce, Nd, Sm, Eu, Gd, Tb, Dy, Lu, Hf, Ta, W, Hg, Th and U have been determined by neutron activation analysis, K-40, U-238, U-235 and Th-232 have been measured radiometrically, H, C, O, N, and S have been dosed by dynamic flash combustion, while gravimetric methods have been used to measure moisture and ash content together with calorific value. Major mineralogical fractions have been investigated by means of X-ray diffraction. The results have shown significant positive correlations between radiometric and activation analysis results, between calorific value and carbon, nitrogen and hydrogen concentrations and negative significant correlations between calorific value and ash content. According to the Romanian Regulations, only Cr and Ni for Romanian coal exceeded the minimum threshold to be considered unpolluting elements. The distribution of rare earth elements, La to Th ratio, as well as of Sc, La and Th together with Co, Hf and Th have confirmed that, irrespective of sample sources, the mineral part of coal has a composition close to that of the upper continental crust.

  18. Adherence to ERAS elements in major visceral surgery-an observational pilot study.

    Science.gov (United States)

    Wolk, Steffen; Distler, Marius; Müssle, Benjamin; Söthje, Susanne; Weitz, Jürgen; Welsch, Thilo

    2016-05-01

    Enhanced recovery after surgery (ERAS) programs have been introduced increasingly into major visceral surgery. Key elements target on early drain removal and mobilization of the patients; however, reporting of adherence to ERAS protocols has often been insufficiently assessed. The present study aims to prospectively evaluate ERAS compliance after major visceral surgery. A prospective pilot study was designed, and 34 patients scheduled for major hepatopancreatic or gastric surgery were followed postoperatively until postoperative day (POD) 10. Analgesia and drain management, diet, mobilization, willingness to exercise, and the use of discharge criteria were accurately assessed within an established ERAS protocol scenario. Thirty-one cases were analyzed that consisted of 54.8 % major pancreatic, 29.0 % hepatic, and 16.1 % gastric resections. The median hospital stay was 12.5 days, and 83.9 % of the patients met the objective criteria before discharge. By POD 4, wound, epidural, and urinary catheters were still in place in 70, 60, and 40 % of the patients, respectively. Fifty percent of the patients ambulated out of bed until POD 2. The cumulative duration of postoperative mobilization per day ranged from 15 to 155 min, and only 40 % of the patients felt comfortable with additional mobilization or physical exercise. Adherence to ERAS protocols is poorly reported. The results indicate a discrepancy between ERAS targets and actual practice in comorbid patients undergoing major visceral surgery, need for a prompt redefinition of ERAS mobilization targets, need for the improvement of counseling, and need for the implementation of ERAS principles.

  19. STRESS ANALYSIS OF COMPOSITE PROPELLER BY USING FINITE ELEMENT ANALYSIS

    Directory of Open Access Journals (Sweden)

    B.SRIDHAR REDDY

    2012-08-01

    Full Text Available Present work proposes a methodology to design a propeller with a metal and composite material to analyze its strength and deformation using Ansys software. In order to evaluate the effectiveness of composite over metals, stress analysis is performed on both composite and metal propeller using Ansys. Proposed methodology showed substantial improvements in metal propellers. The mean deflection, normal stress and shear stress were found for both metallic and composite propeller by using Ansys. From the results, stressanalysis composite propeller is safe resonance phenomenon. In this work effort is made to reduce stress levels so that advantage of weight reduction along with stresses can be obtained. The comparison analysis of metallic and composite propeller was made for the maximum deformation and normal stresses.

  20. Rhyolite magma evolution recorded in isotope and trace element composition of zircon from Halle Volcanic Complex

    Science.gov (United States)

    Słodczyk, E.; Pietranik, A.; Breitkreuz, C.; Fanning, C. M.; Anczkiewicz, R.; Ehling, B.-C.

    2016-04-01

    Voluminous felsic volcanic magmas were formed in Central Europe at the Carboniferous/Permian boundary in numerous pull-apart basins; one of which is the Saale Basin, which holds the Halle Volcanic Complex (HVC), the focus of this study. The rhyolites in the HVC formed laccoliths and scarce lavas, and occur in two different textural types: fine and coarse porphyritic. Zircon isotope and trace element composition was analysed in four units, two per each textural type. Zircon from the different units shows similar ranges in εHf (- 4.1 to - 8.1) and δ18O values (6.51-8.26), indicating similar sources and evolution processes for texturally diverse rhyolites from the HVC. Scarce inherited zircon ranges from ~ 315 Ma to ~ 2100 Ma with the major groupings around 315-550 Ma. These ages are typical for Devonian arc magmatic activity (350-400 Ma) and Cadomian igneous rocks (500-600 Ma), which occur in the basement presently underlying the HVC. Therefore, the source of the rhyolites was multicomponent and probably represented by a basement composed of various crystalline rocks. Trace elements in zircon show similar distributions in all analysed samples, which is broadly consistent with zircon cores crystallizing in a less evolved magma undergoing limited fractional crystallization, whilst the zircon rims crystallized from a magma undergoing extensive fractional crystallization of major and accessory minerals. Interestingly, comparison of the zircon composition in HVC rhyolites and other rhyolites worldwide shows that the observed trends are similar in such rhyolites despite the values being different. This may suggest that most of the zircon in rhyolites crystallizes at a similar stage in the rhyolite magma evolution, from magmas undergoing extensive crystallization of major phases and apatite. The implication is that most of the zircon represents late stage crystallization, but also that antecrystic component may be present and preserve information on the development of

  1. Advanced Manufacturing Technologies (AMT): Composites Integrated Modeling Element

    Data.gov (United States)

    National Aeronautics and Space Administration — CIM encompassed computational methods, tools and processes that go into the materials, design, manufacturing and qualification of composite aerospace structures....

  2. Linking trace element variations with macronutrients and major cations in marine mussels Mytilus edulis and Perna viridis.

    Science.gov (United States)

    Liu, Fengjie; Wang, Wen-Xiong

    2015-09-01

    Marine mussels have long been used as biomonitors of contamination of trace elements, but little is known about whether variation in tissue trace elements is significantly associated with those of macronutrients and major cations. The authors examined the variability of macronutrients and major cations and their potential relationships with bioaccumulation of trace elements. The authors analyzed the concentrations of macronutrients (C, N, P, S), major cations (Na, Mg, K, Ca), and trace elements (Al, V, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Mo, Cd, Ba, Pb) in the whole soft tissues of marine mussels Mytilus edulis and Perna viridis collected globally from 21 sites. The results showed that 12% to 84% of the variances in the trace elements was associated with major cations, and the tissue concentration of major cations such as Na and Mg in mussels was a good proxy for ambient seawater concentrations of the major cations. Specifically, bioaccumulation of most of the trace elements was significantly associated with major cations, and the relationships of major cations with trace cations and trace oxyanions were totally opposite. Furthermore, 14% to 69% of the variances in the trace elements were significantly associated with macronutrients. Notably, more than half of the variance in the tissue concentrations of As, Cd, V, Ba, and Pb was explained by the variance in macronutrients in one or both species. Because the tissue macronutrient concentrations were strongly associated with animal growth and reproduction, the observed coupling relationships indicated that these biological processes strongly influenced the bioaccumulation of some trace elements. The present study indicated that simultaneous quantification of macronutrients and major cations with trace elements can improve the interpretation of biomonitoring data. © 2015 SETAC.

  3. Trace-element composition of Chicxulub crater melt rock, K/T tektites and Yucatan basement

    Science.gov (United States)

    Hildebrand, A. R.; Gregoire, D. C.; Attrep, M., Jr.; Claeys, P.; Thompson, C. M.; Boynton, W. V.

    1993-01-01

    The Cretaceous/Tertiary (K/T) boundary Chicxulub impact is the best preserved large impact in the geologic record. The Chicxulub crater has been buried with no apparent erosion of its intracrater deposits, and its ejecta blanket is known and is well preserved at hundreds of localities globally. Although most of the molten material ejected from the crater has been largely altered, a few localities still preserve tektite glass. Availability of intra- and extracrater impact products as well as plausible matches to the targeted rocks allows the comparison of compositions of the different classes of impact products to those of the impacted lithologies. Determination of trace-element compositions of the K/T tektites, Chicxulub melt rock, and the targeted Yucatan silicate basement and carbonate/evaporite lithologies have been made using instrumental neutron activation analysis (INAA) and inductively coupled plasma mass spectrometry (ICP-MS). Some sample splits were studied with both techniques to ensure that inter-laboratory variation was not significant or could be corrected. The concentration of a few major and minor elements was also checked against microprobe results. Radiochemical neutron activation analysis (RNAA) was used to determine Ir abundances in some samples.

  4. Effects of an extreme flood on trace elements in river water—From urban stream to major river basin

    Science.gov (United States)

    Barber, Larry B.; Paschke, Suzanne; Battaglin, William A.; Douville, Chris; Fitzgerald, Kevin C.; Keefe, Steffanie H.; Roth, David A.; Vajda, Alan M.

    2017-01-01

    Major floods adversely affect water quality through surface runoff, groundwater discharge, and damage to municipal water infrastructure. Despite their importance, it can be difficult to assess the effects of floods on streamwater chemistry because of challenges collecting samples and the absence of baseline data. This study documents water quality during the September 2013 extreme flood in the South Platte River, Colorado, USA. Weekly time-series water samples were collected from 3 urban source waters (municipal tap water, streamwater, and wastewater treatment facility effluent) under normal-flow and flood conditions. In addition, water samples were collected during the flood at 5 locations along the South Platte River and from 7 tributaries along the Colorado Front Range. Samples were analyzed for 54 major and trace elements. Specific chemical tracers, representing different natural and anthropogenic sources and geochemical behaviors, were used to compare streamwater composition before and during the flood. The results differentiate hydrological processes that affected water quality: (1) in the upper watershed, runoff diluted most dissolved constituents, (2) in the urban corridor and lower watershed, runoff mobilized soluble constituents accumulated on the landscape and contributed to stream loading, and (3) flood-induced groundwater discharge mobilized soluble constituents stored in the vadose zone.

  5. Major and trace elements assessment in sediment from Ituparanga reservoir, by activation analysis and ICP OES

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Sharlleny A., E-mail: sharllenya@cetesbnet.sp.gov.br [Companhia de Tecnologia de Saneamento Ambiental (CETESB), Sao Paulo, SP (Brazil). Lab. de Quimica Inorganica; Bevilacqua, Jose Eduardo [Companhia de Tecnologia de Saneamento Ambiental (CETESB), Sao Paulo, SP (Brazil). Diretoria de Tecnologia, Qualidade e Avaliacao Ambiental; Favaro, Deborah I.T., E-mail: defavaro@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Lab. de Analise por Ativacao Neutronica

    2011-07-01

    The Ituparanga reservoir was built to generate electric power by the LIGHT Company and started its operation in 1912. It is fed by the Una, Sorocamirim and Sorocabucu rivers. This reservoir supplies water to a population of 600.000. This water system is affected by irregular soil occupation and urban development which has caught CETESB's (Environmental Company of Sao Paulo State) attention. In this study four geo-referenced sampling points were used and bottom sediment samples were collected. The sediment samples were dried at 400 deg C, ground in an agate mortar, sieved (200 mesh) and again homogenized. The instrumental neutron activation analysis was applied to the sediment samples in order to determine some major elements (Fe, K and Na), trace (As, Ba, Br, Co, Cr, Cs, Hf, Rb, Sb, Sc, Ta, Tb, Th, U and Zn) and rare earth (Ce, Eu, La, Lu, Nd, Sm, Tb and Yb) elements. By using ICP OES metals determination for Cd, Cr, Cu, Pb and Ni was undertaken after digestion procedure according to the 3051 method from US EPA. The methodology validation for precision and accuracy was carried out by reference material analyses. For metals Cd, Cr, Cu, Pb and Ni the concentration values were compared to the oriented values from Environmental Canada (TEL and PEL). The Enrichment Factor (EF) was calculated for sediment contamination assessment. (author)

  6. Finite Element Analysis of Adaptive-Stiffening and Shape-Control SMA Hybrid Composites

    Science.gov (United States)

    Gao, Xiujie; Burton, Deborah; Turner, Travis L.; Brinson, Catherine

    2005-01-01

    Shape memory alloy hybrid composites with adaptive-stiffening or morphing functions are simulated using finite element analysis. The composite structure is a laminated fiber-polymer composite beam with embedded SMA ribbons at various positions with respect to the neutral axis of the beam. Adaptive stiffening or morphing is activated via selective resistance heating of the SMA ribbons or uniform thermal loads on the beam. The thermomechanical behavior of these composites was simulated in ABAQUS using user-defined SMA elements. The examples demonstrate the usefulness of the methods for the design and simulation of SMA hybrid composites. Keywords: shape memory alloys, Nitinol, ABAQUS, finite element analysis, post-buckling control, shape control, deflection control, adaptive stiffening, morphing, constitutive modeling, user element

  7. RANDOM MICROSTRUCTURE FINITE ELEMENT METHOD AND ITS VERIFICATION FOR EFFECTIVE PROPERTIES OF COMPOSITE MATERIALS

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The present study aims at developing a new method-Random M icrostructure Finite Element Method (RMFEM)for the effective properties of composite materials . In this method, a random microstructure model is used to simulate the microstructure of the real composite materials. The physical fields in such a randm microstructure model under specified boundary and initial conditions are analyzed by finite element method. The effective properties of composite materials can be obtained from the analysis results. As verification, some effective properties of composite materials, such as elastic module,thermal expansion coefficient, thermal conductivity and elastoplastic properties, are investigated by random microstructure finite element method. The numerical results are given together with the experimental data. It i- revealed that the random microstructure finite element method is a very valid method for the determination of the effective properties of composite materials.

  8. Element Partitioning Constraints on Formation and Composition of the Earth's Core

    Science.gov (United States)

    Li, J.; Agee, C. B.; Fei, Y.

    1998-01-01

    Element partitioning study provides a number of constraints on the formation and composition of the core. First, partitioning of siderophile elements between the core and mantle should explain the "excess" siderophile elements in the mantle. Second, partitioning of light element(s) between the core and mantle should supply the core with the right amount of light element(s) to account for the density deficit in the core. Third, partitioning of light element(s) between the inner and outer core should be consistent with the observed difference in density deficits (relative to pure Fe) between these two reservoirs. In this study, high-pressure and high-temperature experiments have been conducted to investigate the pressure, temperature, and composition effects on partitioning of siderophile elements Ni and Co between core-forming Fe alloy and mantle silicate melt and minerals, partitioning of light elements S, O, and Si between core-forming Fe alloy and mantle silicate melt and minerals, and partitioning of light elements S and C between solid and liquid Fe. The implications of these results for mechanism of core formation and the composition of the core are discussed.

  9. Calibration of a finite element composite delamination model by experiments

    DEFF Research Database (Denmark)

    Gaiotti, M.; Rizzo, C.M.; Branner, Kim;

    2013-01-01

    distinct sub-laminates. The work focuses on experimental validation of a finite element model built using the 9-noded MITC9 shell elements, which prevent locking effects and aiming to capture the highly non linear buckling features involved in the problem. The geometry has been numerically defined...... modes related to the production methods is presented in this paper. A microscopic analysis of the fracture surfaces was carried out in order to better understand the failure mechanisms. © 2013 Taylor & Francis Group....

  10. Three-dimensional finite element simulation of intermingled-fiber hybrid composite behavior

    Science.gov (United States)

    Mital, Subodh K.; Chamis, Christos C.

    1992-01-01

    Three-dimensional finite element methods and the intraply hybrid micromechanics equations are used to predict composite properties for a unidirectional graphite-epoxy primary composite with S-glass fibers used as hybridizing fibers. The micromechanics equations are embedded in a computer code ICAN (Integrated Composites Analyzer). The three-dimensional finite element model consists of three-by-three unit cell array, with a total fiber volume ratio of 0.54. There is a good agreement between the composite properties and microstresses obtained from both methods. The results indicate that the finite element methods and micromechanics equations can be used to obtain the properties of intermingled hybrid composites needed for analysis/design of hybrid composite structures.

  11. Isotopic and Elemental Composition of Roasted Coffee as a Guide to Authenticity and Origin.

    Science.gov (United States)

    Carter, James F; Yates, Hans S A; Tinggi, Ujang

    2015-06-24

    This study presents the stable isotopic and elemental compositions of single-origin, roasted coffees available to retail consumers. The δ(13)C, δ(15)N, and δ(18)O compositions were in agreement with those previously reported for green coffee beans. The δ(15)N composition was seen to be related to organic cultivation, reflected in both δ(2)H and δ(18)O compositions. The δ(13)C composition of extracted caffeine differed little from that of the bulk coffee. Stepwise discriminant analysis with jackknife tests, using isotopic and elemental data, provided up to 77% correct classification of regions of production. Samples from Africa and India were readily classified. The wide range in both isotopic and elemental compositions of samples from other regions, specifically Central/South America, resulted in poor discrimination between or within these regions. Simpler X-Y and geo-spatial plots of the isotopic data provided effective visual means to distinguish between coffees from different regions.

  12. Finite Element Analysis of Layered Fiber Composite Structures Accounting for the Material's Microstructure and Delamination

    Science.gov (United States)

    Stier, Bertram; Simon, Jaan-Willem; Reese, Stefanie

    2015-04-01

    The present paper focuses on composite structures which consist of several layers of carbon fiber reinforced plastics (CFRP). For such layered composite structures, delamination constitutes one of the major failure modes. Predicting its initiation is essential for the design of these composites. Evaluating stress-strength relation based onset criteria requires an accurate representation of the through-the-thickness stress distribution, which can be particularly delicate in the case of shell-like structures. Thus, in this paper, a solid-shell finite element formulation is utilized which allows to incorporate a fully three-dimensional material model while still being suitable for applications involving thin structures. Moreover, locking phenomena are cured by using both the EAS and the ANS concept, and numerical efficiency is ensured through reduced integration. The proposed anisotropic material model accounts for the material's micro-structure by using the concept of structural tensors. It is validated by comparison to experimental data as well as by application to numerical examples.

  13. Yellow and red ochre pigments from southern Portugal: Elemental composition and characterization by WDXRF and XRD

    Energy Technology Data Exchange (ETDEWEB)

    Gil, M. [Conservation and Restoration Department, Science and Technology Faculty, Univ. Nova of Lisbon, Monte da Caparica, 2829-516 Caparica (Portugal); Atomic Physics Center, Lisbon University, Av. Prof. Gama Pinto 2, 1649-003 Lisbon (Portugal)], E-mail: milenegil@gmail.com; Carvalho, M.L. [Atomic Physics Center, Lisbon University, Av. Prof. Gama Pinto 2, 1649-003 Lisbon (Portugal); Seruya, A. [Conservation and Restoration Department, Science and Technology Faculty, Univ. Nova of Lisbon, Monte da Caparica, 2829-516 Caparica (Portugal); Portuguese Institute of Conservation Restoration (IPCR), Rua das janelas Verdes 37, 1300-001 Lisbon (Portugal); Candeias, A.E. [Chemistry Department and Evora Chemistry Center, University of Evora, Rua Romao Ramalho, 59 Evora (Portugal); Mirao, J. [Giosciences Department and Evora Geophysics Center, University of Evora, Rua Romao Ramalho, 59 Evora (Portugal); Queralt, I. [Laboratory of X-ray Analytical Applications, Institute of Earth Sciences ' Jaume Almera' CSIC, Sole' Sabari' s s/n 08028 Barcelona (Spain)

    2007-09-21

    Three different yellow and red ochre pigments geological sources from Alentejo-Terras rossas, schist units and weathered iron ore deposits-were studied by elemental and phase analysis complemented with Munsell and CIELAB colour parameters. Central aims were to underline the mineralogical and chemical distinctiveness of natural pigment sources and establish a connection between local geology and use of specific colour pigments in traditional lime wash mural paintings. According to the chemical composition the Fe abundance is 6 times higher than average crust values. The Terras Rossas are characterized by higher Ca contents. In yellow and red schists, phyllosilicates are major minerals, so pigments from these units are enriched in K and Rb. Besides Fe, the pigments from weathered ores are enriched in metals like Pb, As, Cu, and Zn, which can be used as fingerprints.

  14. A correlation for calculating elemental composition from proximate analysis of biomass materials

    Energy Technology Data Exchange (ETDEWEB)

    Jigisha Parikh; S.A. Channiwala; G.K. Ghosal [Sarvajanik College of Engineering and Technology, Surat (India). Chemical Engineering Department

    2007-08-15

    Elemental composition of biomass is an important property, which defines the energy content and determines the clean and efficient use of the biomass materials. However, the ultimate analysis requires very expensive equipments and highly trained analysts. The proximate analysis on the other hand only requires standard laboratory equipments and can be run by any competent scientist or engineer. This work introduces a general correlation, based on proximate analysis of biomass materials, to calculate elemental composition, derived using 200 data points and validated further for additional 50 data points. The entire spectrum of solid lignocellulosic materials have been considered in the derivation of the present correlation, which is given as: C = 0.637FC + 0.455VM, H = 0.052FC + 0.062VM, O = 0.304FC + 0.476VM, where FC - 4.7-38.4% fixed carbon, VM - 57.2-90.6% volatile matter, C - 36.2-53.1% carbon, H - 4.36-8.3% hydrogen and O - 31.37-49.5% oxygen in wt% on a dry basis. The average absolute error of these correlations are 3.21%, 4.79%, 3.4% and bias error of 0.21%, -0.15% and 0.49% with respect to measured values C, H and O, respectively. The major advantage of these correlations is their capability to compute elemental components of biomass materials from the simple proximate analysis and thereby provides a useful tool for the modeling of combustion, gasification and pyrolysis processes. 32 refs., 6 figs., 2 tabs.

  15. Elemental (C, H, N) composition of zooplankton from north Arabian Sea

    Digital Repository Service at National Institute of Oceanography (India)

    Matondkar, S.G.P.; Bhat, K.L.; Ansari, Z.A.; Parulekar, A.H.

    Zooplankton samples collected from north Arabian Sea during March 1992 were analysed for elemental (C,H,N) composition. Estimated carbon, hydrogen and nitrogen concentrations displayed variations among different groups but their ratios were nearly...

  16. METHODS OF THE APPROXIMATE ESTIMATIONS OF FATIGUE DURABILITY OF COMPOSITE AIRFRAME COMPONENT TYPICAL ELEMENTS

    Directory of Open Access Journals (Sweden)

    V. E. Strizhius

    2015-01-01

    Full Text Available Methods of the approximate estimations of fatigue durability of composite airframe component typical elements which can be recommended for application at the stage of outline designing of the airplane are generated and presented.

  17. Finite element analysis of a composite artificial ankle

    Science.gov (United States)

    Perkins, Leigh Ann; Johnston, Lawrence; Denniston, Charles; Czekalski, Blaise E.

    1993-01-01

    Ultra-light carbon fiber composite materials are being utilized in artificial limbs with increasing frequency in recent years. Dr. Arthur Copes, an orthotist from Baton Rouge, Louisiana, has developed a graphite expoxy composite material artificial ankle (Copes/Bionic Ankle) that is intended to be used by amputees who require the most advanced above-and-below-the-knee prosthetic devices. The Copes/Bionic Ankle is designed to reproduce the function of the natural ankle joint by allowing the composite material to act as a spring mechanism without the use of metal mechanical parts. NASA Marshall Space Flight Center has agreed to participate in the design effort by providing the structural analysis of the artificial ankle design.

  18. Postmodern landscape architecture: theoretical, compositional characteristics and design elements with the analysis of 25 projects

    OpenAIRE

    Eplényi Anna; Oláh-Christian Brigitta

    2015-01-01

    This paper endeavours to highlight three aspects of postmodern landscape design: theoretical basis, composition and design elements. Postmodern theories, philosophy influenced the language of the postmodern landscape architecture and got materialized in the use of narratives, eclecticism, the Rhizome-principle. Postmodern landscape composition can be associated with anti-hierarchy, unusual structures, landforms, and playful moods. Postmodern design elements consist of the strong graphical use...

  19. DEFINING ELEMENTAL COMPOSITION OF VEGETABLE HYDROCOLLOIDS USING THE ELECTRON PROBE MICROANALYSIS METHOD

    OpenAIRE

    2014-01-01

    In production of soft capsules, natural and semi-synthetic vegetative analogues for pharmaceutical gelatin are used. This work is devoted to defining elemental composition of vegetative analogs for pharmaceutical gelatin using the electron probe microanalysis method. The electron probe microanalysis is one of the most popular methods of quantitative and semi-quantitative nondestructive elemental analysis. Spectrometric profiles are described for defining the composition of carboxymethylcellul...

  20. Apatite in carbonatitic rocks: Compositional variation, zoning, element partitioning and petrogenetic significance

    Science.gov (United States)

    Chakhmouradian, Anton R.; Reguir, Ekaterina P.; Zaitsev, Anatoly N.; Couëslan, Christopher; Xu, Cheng; Kynický, Jindřich; Mumin, A. Hamid; Yang, Panseok

    2017-03-01

    Apatite-group phosphates are nearly ubiquitous in carbonatites, but our understanding of these minerals is inadequate, particularly in the areas of element partitioning and petrogenetic interpretation of their compositional variation among spatially associated rocks and within individual crystals. In the present work, the mode of occurrence, and major- and trace-element chemistry of apatite (sensu lato) from calcite and dolomite carbonatites, their associated cumulate rocks (including phoscorites) and hydrothermal parageneses were studied using a set of 80 samples from 50 localities worldwide. The majority of this set represents material for which no analytical data are available in the literature. Electron-microprobe and laser-ablation mass-spectrometry data ( 600 and 400 analyses, respectively), accompanied by back-scattered-electron and cathodoluminescence images and Raman spectra, were used to identify the key compositional characteristics and zoning patterns of carbonatitic apatite. These data are placed in the context of phosphorus geochemistry in carbonatitic systems and carbonatite evolution, and compared to the models proposed by previous workers. The documented variations in apatite morphology and zoning represent a detailed record of a wide range of evolutionary processes, both magmatic and fluid-driven. The majority of igneous apatite from the examined rocks is Cl-poor fluorapatite or F-rich hydroxylapatite (≥ 0.3 apfu F) with 0.2-2.7 wt.% SrO, 0-4.5 wt.% LREE2O3, 0-0.8 wt.% Na2O, and low levels of other cations accommodated in the Ca site (up to 1000 ppm Mn, 2300 ppm Fe, 200 ppm Ba, 150 ppm Pb, 700 ppm Th and 150 ppm U), none of which show meaningful correlation with the host-rock type. Silicate, (SO4)2 - and (VO4)3 - anions, substituting for (PO4)3 -, tend to occur in greater abundance in crystals from calcite carbonatites (up to 4.2 wt.% SiO2, 1.5 wt.% SO3 and 660 ppm V). Although (CO3)2 - groups are very likely present in some samples, Raman micro

  1. Advanced Design of Composite Steel-Concrete Structural element

    Directory of Open Access Journals (Sweden)

    Dr. D. R. Panchal

    2014-07-01

    Full Text Available Composite framing system consisting of steel beams acting interactively with metal deck-concrete slab and concrete encased composite columns, has been as a viable alternative to the conventional steel or reinforced concrete system in the high-rise construction. However, in Indian context, it is comparatively new and no appropriate design codes are available for the same. Complications in the analysis and design of composite structures have led numerous researchers to develop simplified methods so as to eliminate a number of large scale tests needed for the design. In the present work, a simplified method of composite slabs, beams and columns design is used and software is developed with pre- and post- processing facilities in VB.NET. All principal design checks are incorporated in the software. The full and partial shear connection and the requirement for transverse reinforcement are also considered. To facilitate direct selection of steel section, a database is prepared and is available at the back end with the properties of all standard steel sections. Screen shots are included in the paper to illustrate the method employed for selecting the appropriate section and shear connectors and thus to verify the design adequacy.

  2. [Determination of major elements in soil from cancer village by X-ray fluorescence spectrometry].

    Science.gov (United States)

    Wei, Zhen-Lin; Li, He; Rui, Yu-Kui

    2008-11-01

    Many social problems arise from environmental pollution, cancer village is one of the many important problems caused by pollution. The authors selected a typical cancer village where 80-100 people died of cancer in the last five years, but there are only a total of 1 200 people in this village. The authors sampled soils from crops-planted areas and detected the major elements by X-ray fluorescence spectrometry. The results showed that the contents of SiO2, TiO2, Al2O3, Fe2O3, MnO, MgO, CaO, Na2O, K2O and P2O5 in soil of this village were 66.05%, 0.66%, 11.37%, 3.93%, 0.075%, 1.97%, 5.47%, 1.90%, 2.11% and 0.20% respectively; with the precision being +/- 0.20%, +/- 0.005%, +/- 0.10%, +/- 0.10%, +/- 0.005%, +/- 0.05%, +/- 0.04%, +/- 0.08%, +/- 0.02% and +/- 0.005% respectively, which showed that X-ray fluorescence spectrometry is a good method.

  3. Short interspersed elements (SINEs) are a major source of canine genomic diversity.

    Science.gov (United States)

    Wang, Wei; Kirkness, Ewen F

    2005-12-01

    SINEs are retrotransposons that have enjoyed remarkable reproductive success during the course of mammalian evolution, and have played a major role in shaping mammalian genomes. Previously, an analysis of survey-sequence data from an individual dog (a poodle) indicated that canine genomes harbor a high frequency of alleles that differ only by the absence or presence of a SINEC_Cf repeat. Comparison of this survey-sequence data with a draft genome sequence of a distinct dog (a boxer) has confirmed this prediction, and revealed the chromosomal coordinates for >10,000 loci that are bimorphic for SINEC_Cf insertions. Analysis of SINE insertion sites from the genomes of nine additional dogs indicates that 3%-5% are absent from either the poodle or boxer genome sequences--suggesting that an additional 10,000 bimorphic loci could be readily identified in the general dog population. We describe a methodology that can be used to identify these loci, and could be adapted to exploit these bimorphic loci for genotyping purposes. Approximately half of all annotated canine genes contain SINEC_Cf repeats, and these elements are occasionally transcribed. When transcribed in the antisense orientation, they provide splice acceptor sites that can result in incorporation of novel exons. The high frequency of bimorphic SINE insertions in the dog population is predicted to provide numerous examples of allele-specific transcription patterns that will be valuable for the study of differential gene expression among multiple dog breeds.

  4. Lack of chemical fractionation in major and minor elements during agglutinate formation. [in lunar soil

    Science.gov (United States)

    Hu, H.-N.; Taylor, L. A.

    1977-01-01

    Rhodes et al. (1975, 1976) and Adams et al. (1975) have reported that the agglutinate fraction of the soils on the lunar surface displays a marked enrichment in Fe, Mg, Ti, K, and La, and a depletion in Ca, Na, Al, and Eu, relative to the bulk soils. The reported investigation is concerned with a testing of the theory of chemical fractionation involving magnetic separation which was developed in connection with these findings. Soils 64421 and 71501 were sieved and the magnetic fractions separated according to the method developed by Adams and McCord (1973). Analyses of agglutinitic glass did not indicate any appreciable chemical fractionation for the major and minor elements accompanying the agglutination process. It was found that most, if not all fractionations reported can be accounted for completely by the magnetic nonagglutinate impurities in the agglutinate fraction. It is, therefore, concluded that there appears to be no reason to make use of any chemical fractionation theory, whose validity remains to be demonstrated.

  5. Permafrost coverage, watershed area and season control of dissolved carbon and major elements in western Siberian rivers

    Science.gov (United States)

    Pokrovsky, O. S.; Manasypov, R. M.; Loiko, S.; Shirokova, L. S.; Krivtzov, I. A.; Pokrovsky, B. G.; Kolesnichenko, L. G.; Kopysov, S. G.; Zemtzov, V. A.; Kulizhsky, S. P.; Vorobiev, S. N.; Kirpotin, S. N.

    2015-07-01

    Analysis of dissolved organic and inorganic carbon (DOC and DIC, respectively), pH, Na, K, Ca, Mg, Cl, SO4 and Si in ~ 100 large and small rivers ( 10 000 km2. This suggested that in addition to groundwater feeding of the river, there was a significant role of surface and shallow subsurface flow linked to plant litter degradation and peat leaching. Environmental factors are ranked by their increasing effect on DOC, DIC, δ13CDIC, and major elements in western Siberian rivers as the following: watershed area water flow path (deep vs. surface) but has to be considered in the context of different climate, plant biomass productivity, unfrozen peat thickness and peat chemical composition. It can be anticipated that, under climate warming in western Siberia, the maximal change will occur in small (ionic composition, and this change will be mostly pronounced in summer and autumn. The wintertime concentrations and spring flood fluxes and concentrations are unlikely to be appreciably affected by the change of the active layer depth and terrestrial biomass productivity. Assuming a conservative precipitation scenario and rising temperature over next few centuries, the annual fluxes of DOC and K in the discontinuous permafrost zone may see a maximum increase by a factor of 2, whereas for DIC and Mg, this increase may achieve a factor of 3. The fluxes of Ca and TDSc may increase by a factor of 5. At the same time, Si fluxes will either remain constant or decrease two-fold in the permafrost-bearing zone relative to the permafrost-free zone of western Siberia.

  6. Elemental composition method for computation and analysis of simultaneous chemical and phase equilibrium

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    An elemental composition method for computation and analysis of simultaneous chemical and phase equilibrium (CPE) of non-ideal mixtures is proposed. The concept of element is defined, the relationship between component composition and elemental composition is derived, and the concept of elemental potential and its physical meaning are further cleared from the view point of thermodynamics. The relationship between chemical potential and elemental potential is derived in the thermodynamic principles, and the computation equations for CPE problem are obtained based on elemental potential. A simple form of necessary and sufficient condition in terms of elemental composition for reactive azeotropes is derived, which takes the same functional form as the condition for azeotropes in non-reactive systems. The element in this note may be atoms, molecules or group radicals. The presented method is applicable to CPE problem of non-ideal mixtures, and the computation can be simplified by the dimension reducing method. The presented method was supplied to compute and analyze CPE problem of several examples and it is found that it is a robust and efficient method.

  7. Finite element procedure for stress amplification factor recovering in a representative volume of composite materials

    Directory of Open Access Journals (Sweden)

    Paulo Cesar Plaisant Junior

    2011-09-01

    Full Text Available Finite element models are proposed to the micromechanical analysis of a representative volume of composite materials. A detailed description of the meshes, boundary conditions, and loadings are presented. An illustrative application is given to evaluate stress amplification factors within a representative volume of the unidirectional carbon fiber composite plate. The results are discussed and compared to the numerical findings.

  8. Finite element modeling of small-scale tapered wood-laminated composite poles with biomimicry features

    Science.gov (United States)

    Cheng Piao; Todd F. Shupe; R.C. Tang; Chung Y. Hse

    2008-01-01

    Tapered composite poles with biomimicry features as in bamboo are a new generation of wood laminated composite poles that may some day be considered as an alternative to solid wood poles that are widely used in the transmission and telecommunication fields. Five finite element models were developed with ANSYS to predict and assess the performance of five types of...

  9. Alkali elemental and potassium isotopic compositions of Semarkona chondrules

    Science.gov (United States)

    Alexander, C.M. O'D.; Grossman, J.N.

    2005-01-01

    We report measurements of K isotope ratios in 28 Semarkona chondrules with a wide range of petrologic types and bulk compositions as well as the compositions of CPX-mesostasis pairs in 17 type I Semarkona chondrules, including two chondrules with radial alkali zonation and 19 type II chondrules. Despite the wide range in K/Al ratios, no systematic variations in K isotopic compositions were found. Semarkona chondrules do not record a simple history of Rayleigh-type loss of K. Experimentally determined evaporation rates suggest that considerable alkali evaporation would have occurred during chondrule formation. Nevertheless, based on Na CPX-mesostasis distribution coefficients, the alkali contents of the cores of most chondrules in Semarkona were probably established at the time of final crystallization. However, Na CPX-mesostasis distribution coefficients also show that alkali zonation in type I Semarkona chondrules was produced by entry of alkalis after solidification, probably during parent body alteration. This alkali metasomatism may have gone to completion in some chondrules. Our preferred explanation for the lack of systematic isotopic enrichments, even in alkali depleted type I chondrule cores, is that they exchanged with the ambient gas as they cooled. ?? The Meteoritical Society, 2005.

  10. Determining the elemental composition of fuels by bomb calorimetry and the inverse correlation of HHV with elemental composition

    DEFF Research Database (Denmark)

    Bech, Niels; Jensen, Peter Arendt; Dam-Johansen, Kim

    2009-01-01

    This article presents a method to obtain a simplified elemental analysis of an organic sample in which oxygen, nitrogen, and sulphur are lumped. The method uses a bomb calorimeter, water, and ash measurements combined with a numerical procedure based on a generalised equation for predicting highe...

  11. NUMERICAL SIMULATION OF 2D FIBER-REINFORCED COMPOSITES USING BOUNDARY ELEMENT METHOD

    Institute of Scientific and Technical Information of China (English)

    KONG Fan-zhong; ZHENG Xiao-ping; YAO Zhen-han

    2005-01-01

    The boundary element method was improved for the 2D elastic composites with randomly distributed inclusions. This problem can be reduced to a boundary integral equation for a multi-connected domain. Further, considering the matrices of the tractions and displacements for each group of the identical inclusion were the same, an effective computational scheme was designed, since the orders of the resulting matrix equations can be greatly reduced. Numerical examples indicate that this boundary element method scheme is more effective than the conventional multi-domain boundary element method for such a problem. The present scheme can be used to investigate the effective mechanical properties of the fiber-reinforced composites.

  12. Determination of element composition of three lichens and their distribution in King George Island, Antarctica

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Cross-section slices of Usnea antarctica Du Rietz, Usnea aurantiaco-atra (Jacq.) Bory. and Cladonia sp. at upper, middle and basal positions were prepared, respectively. The element composition and relative content were determined by SEM and EDS at the surface, intermediate and inner layers in each slice, respectively. The result indicated that the composition of element is mostly same in these lichens. The relative content of Al, Si, K and Ca elements is high, and P is close at each position. The result is of benefit to study the structure and physiological characteristics of lichens, and to analyze geological environment in Antarctica.

  13. Energy Finite Element Analysis Developments for Vibration Analysis of Composite Aircraft Structures

    Science.gov (United States)

    Vlahopoulos, Nickolas; Schiller, Noah H.

    2011-01-01

    The Energy Finite Element Analysis (EFEA) has been utilized successfully for modeling complex structural-acoustic systems with isotropic structural material properties. In this paper, a formulation for modeling structures made out of composite materials is presented. An approach based on spectral finite element analysis is utilized first for developing the equivalent material properties for the composite material. These equivalent properties are employed in the EFEA governing differential equations for representing the composite materials and deriving the element level matrices. The power transmission characteristics at connections between members made out of non-isotropic composite material are considered for deriving suitable power transmission coefficients at junctions of interconnected members. These coefficients are utilized for computing the joint matrix that is needed to assemble the global system of EFEA equations. The global system of EFEA equations is solved numerically and the vibration levels within the entire system can be computed. The new EFEA formulation for modeling composite laminate structures is validated through comparison to test data collected from a representative composite aircraft fuselage that is made out of a composite outer shell and composite frames and stiffeners. NASA Langley constructed the composite cylinder and conducted the test measurements utilized in this work.

  14. The analysis of adhesively bonded advanced composite joints using joint finite elements

    Science.gov (United States)

    Stapleton, Scott E.

    The design and sizing of adhesively bonded joints has always been a major bottleneck in the design of composite vehicles. Dense finite element (FE) meshes are required to capture the full behavior of a joint numerically, but these dense meshes are impractical in vehicle-scale models where a course mesh is more desirable to make quick assessments and comparisons of different joint geometries. Analytical models are often helpful in sizing, but difficulties arise in coupling these models with full-vehicle FE models. Therefore, a joint FE was created which can be used within structural FE models to make quick assessments of bonded composite joints. The shape functions of the joint FE were found by solving the governing equations for a structural model for a joint. By analytically determining the shape functions of the joint FE, the complex joint behavior can be captured with very few elements. This joint FE was modified and used to consider adhesives with functionally graded material properties to reduce the peel stress concentrations located near adherend discontinuities. Several practical concerns impede the actual use of such adhesives. These include increased manufacturing complications, alterations to the grading due to adhesive flow during manufacturing, and whether changing the loading conditions significantly impact the effectiveness of the grading. An analytical study is conducted to address these three concerns. Furthermore, proof-of-concept testing is conducted to show the potential advantages of functionally graded adhesives. In this study, grading is achieved by strategically placing glass beads within the adhesive layer at different densities along the joint. Furthermore, the capability to model non-linear adhesive constitutive behavior with large rotations was developed, and progressive failure of the adhesive was modeled by re-meshing the joint as the adhesive fails. Results predicted using the joint FE was compared with experimental results for various

  15. Hair from different ethnic groups vary in elemental composition and nitrogen and phosphorus mineralisation in soil.

    Science.gov (United States)

    Malepfane, N M; Muchaonyerwa, P

    2017-02-01

    Disposal of hair wastes at landfills causes nitrate leaching to ground water, and use of the waste as fertiliser could be a viable option. This study was to determine elemental composition of major hair types in South Africa and their nitrogen (N) and phosphorus (P) release in soil. Wastes of African, White and Indian hair were obtained from local salons and analysed for carbon (C), N and sulphur (S) with the Leco CNS analyzer, and P, bases, aluminium (Al) and micronutrients, with the ICP. We also conducted an incubation study to determine changes in mineral N and P in soil. Hair wastes were added to soil at increasing rates based on N, incubated at 25 °C with destructive sampling after 0, 28, 56 and 84 days and pH, ammonium-N, nitrate-N and extractable P measured. All data were subjected to analysis of variance. Indian and White hair had higher N than African. White hair had higher C and lower potassium (K) than those of other types. The Fe levels in hair were in the order White > African > Indian, whilst those of Al were African > Indian > White. African hair had higher calcium (Ca), manganese (Mn), zinc (Zn) and cobalt (Co) than the other types. Ammonium-N and nitrate-N releases were in the order: Indian > African > White, especially at higher rates. Ammonium-N increased in the first 28 days and declined thereafter, when nitrate-N increased and pH decreased. The findings implied that hair types differ in elemental composition and nitrogen release in soil, with implications on pollution and soil fertility.

  16. The Analysis of Adhesively Bonded Advanced Composite Joints Using Joint Finite Elements

    Science.gov (United States)

    Stapleton, Scott E.; Waas, Anthony M.

    2012-01-01

    The design and sizing of adhesively bonded joints has always been a major bottleneck in the design of composite vehicles. Dense finite element (FE) meshes are required to capture the full behavior of a joint numerically, but these dense meshes are impractical in vehicle-scale models where a course mesh is more desirable to make quick assessments and comparisons of different joint geometries. Analytical models are often helpful in sizing, but difficulties arise in coupling these models with full-vehicle FE models. Therefore, a joint FE was created which can be used within structural FE models to make quick assessments of bonded composite joints. The shape functions of the joint FE were found by solving the governing equations for a structural model for a joint. By analytically determining the shape functions of the joint FE, the complex joint behavior can be captured with very few elements. This joint FE was modified and used to consider adhesives with functionally graded material properties to reduce the peel stress concentrations located near adherend discontinuities. Several practical concerns impede the actual use of such adhesives. These include increased manufacturing complications, alterations to the grading due to adhesive flow during manufacturing, and whether changing the loading conditions significantly impact the effectiveness of the grading. An analytical study is conducted to address these three concerns. Furthermore, proof-of-concept testing is conducted to show the potential advantages of functionally graded adhesives. In this study, grading is achieved by strategically placing glass beads within the adhesive layer at different densities along the joint. Furthermore, the capability to model non-linear adhesive constitutive behavior with large rotations was developed, and progressive failure of the adhesive was modeled by re-meshing the joint as the adhesive fails. Results predicted using the joint FE was compared with experimental results for various

  17. Long-term cycling of mantle Pb: A trace element study of the major mantle mineral phases in abyssal peridotites

    Science.gov (United States)

    D'Errico, M. E.; Warren, J. M.; Godard, M.; Ildefonse, B.

    2012-12-01

    Peridotites from ultraslow-spreading ridges preserve signatures of the depleted mantle, while also reflecting the fine scale compositional variability present in the mantle. Traditional analyses of these depleted rocks have focused on clinopyroxene, the main trace element host in spinel peridotites. However, key isotopic systems, such as lead and osmium, are hosted in other phases at low but significant concentration levels. The amount of lead contained within mantle mineral phases is of critical importance to understanding the long-term evolution of the Earth, because the radiogenic isotopes of lead are sensitive to past material cycling and melt-rock interaction. Sulfides have long been suggested as the main host for lead (Pb) in the mantle, but recent studies have demonstrated that Pb is not exclusively hosted in this trace phase. Therefore, the Pb contents of the major peridotite mineral phases (olivine, orthopyroxene, and clinopyroxene) need to be reassessed. Lead concentration data is available for orogenic and xenolith peridotite samples, which are typically more enriched than abyssal peridotites, but these do not provide direct information on the oceanic upper mantle. Direct measurement of Pb in abyssal peridotites has so far been limited because of its extremely low concentration (often plasma mass spectrometry (LA-ICP-MS). The LA-ICP-MS technique achieves high spatial resolution combined with detection of low elemental abundances. External precision varied from 6% to 17%, with a precision of 6% for Pb, based on 14 repeat analyses of BIR-1G standard basalt glass. Laser spot size varied from 102-163 microns, which produced a detection limit of 0.42-0.81 ppb for Pb. This study focused on abyssal peridotites from the ultra-slow spreading Gakkel and Southwest Indian Ridges (SWIR), with samples coming from segments with full spreading rates fresh samples from Gakkel. A total of five Gakkel and six SWIR peridotites were analyzed by LA-ICP-MS, with a subset of

  18. A Synthesis of Experimental Data Describing the Partitioning of Moderately Volatile Elements in Major Rock Forming Minerals: Implications for the Moon

    Science.gov (United States)

    Vander Kaaden, Kathleen E.; Draper, David S.; McCubbin, Francis M.; Neal, Clive R.; Taylor, G. Jeffrey

    2017-01-01

    Highly volatile elements [condensation temperatures below about 700 K] and water are highly informative about lunar bulk composition (hence origin), differentiation and magmatic evolution, and the role of impacts in delivering volatiles to the Moon. Fractionation of volatile elements compared to moderately volatile and refractory elements are informative about high-temperature conditions that operated in the proto-lunar disk. Existing data show clearly that the Moon is depleted in volatile elements compared to the bulk silicate Earth. For example, K/Th is 400-700 in the Moon compared to 2800-3000 in Earth. A complicating factor is that the abundances of the highly volatile elements in major lunar lithologies vary by approximately two orders of magnitude. Perhaps most interesting, H2O is not correlated with the concentration of volatile elements, indicating a decoupling of highly volatile elements from the even more volatile H2O. We contend that this decoupling could be a significant tracer of processes operating during lunar formation, differentiation, and bombardment, and the combination of analyzing both volatile elements and water is likely to provide significant insight into lunar geochemical history. This variation and lack of correlation raises the question: what were the relative contributions of crystallization in the magma ocean, subsequent mantle overturn, production of secondary magmas, and addition of volatiles by large impacts in producing this apparently large range in volatile abundances? This current study will produce new partitioning data relevant to the role and distribution of the volatile and non-volatile, yet geochemically significant elements (Co, Ni, Zn, Se, Rb, Sr, Mo, Ag, Cd, In, Sb, Ce, Yb, Tl, Pb, Bi) during the thermal and magmatic evolution of the Moon.

  19. COMGEN: A computer program for generating finite element models of composite materials at the micro level

    Science.gov (United States)

    Melis, Matthew E.

    1990-01-01

    COMGEN (Composite Model Generator) is an interactive FORTRAN program which can be used to create a wide variety of finite element models of continuous fiber composite materials at the micro level. It quickly generates batch or session files to be submitted to the finite element pre- and postprocessor PATRAN based on a few simple user inputs such as fiber diameter and percent fiber volume fraction of the composite to be analyzed. In addition, various mesh densities, boundary conditions, and loads can be assigned easily to the models within COMGEN. PATRAN uses a session file to generate finite element models and their associated loads which can then be translated to virtually any finite element analysis code such as NASTRAN or MARC.

  20. Study of the stress-strain state of compressed concrete elements with composite reinforcement

    Directory of Open Access Journals (Sweden)

    Bondarenko Yurii

    2017-01-01

    Full Text Available The efficiency analysis of the application of glass composite reinforcement in compressed concrete elements as a load-carrying component has been performed. The results of experimental studies of the deformation-strength characteristics of this reinforcement on compression and compressed concrete cylinders reinforced by this reinforcement are presented. The results of tests and mechanisms of sample destruction have been analyzed. The numerical analysis of the stress-strain state has been performed for axial compression of concrete elements with glasscomposite reinforcement. The influence of the reinforcement percentage on the stressed state of a concrete compressed element with the noted reinforcement is estimated. On the basis of the obtained results, it is established that the glass-composite reinforcement has positive effect on the strength of the compressed concrete elements. That is, when calculating the load-bearing capacity of such structures, the function of composite reinforcement on compression should not be neglected.

  1. Experiments of Multi-element Composite Foundation with Steel Pipe Pile and Gravel Pile

    Institute of Scientific and Technical Information of China (English)

    WANG Xian-zhi; ZHENG Jun-jie

    2008-01-01

    A set of self-developed apparatus for foundation physical model were utilized to conduct model tests of the multi-element composite foundation with a steel pipe pile and several gravel piles. Some load-bearing characteristics of the multi-element composite foundation, including the curves of foundation settlement, stresses of piles, pile-soil stress ratio, and load-sharing ratio of piles and soil, were obtained to study its working performances in silty sand soil. The experimental results revealed that the multi-element composite foundation with steel pipe pile and gravel pile contributed more than the gravel pile composite foundation in improving the bearing capacity of the silty fine sand.

  2. Tensile Properties of Surface-Treated Glass Fiber Reinforced PTFE Composite with Rare Earth Elements

    Institute of Scientific and Technical Information of China (English)

    薛玉君; 程先华

    2003-01-01

    The optimum amount of rare earth elements (RE) for treating glass fiber surface and its effect on the tensile properties of glass fiber reinforced polytetrafluoroethylene (GF/PTFE) composites were investigated. The tensile properties of GF/PTFE composites with different surface treatment conditions were measured. The fracture surface morphologies were observed and analyzed by SEM. The results indicate that rare earth elements can effectively promote the interfacial adhesion between the glass fiber and PTFE, owing to the effects of rare earth elements on the compatibility. The tensile properties of GF/PTFE composites can be improved considerably when the content of RE in surface modifier is 0.2%~0.4%, and the optimum performance of GF/PTFE composites is obtained at 0.3%RE content.

  3. Predictions of biochar yield and elemental composition during torrefaction of forest residues.

    Science.gov (United States)

    Bach, Quang-Vu; Chen, Wei-Hsin; Chu, Yen-Shih; Skreiberg, Øyvind

    2016-09-01

    In this work, a direct prediction method coupled with a consecutive reaction model is developed to estimate the biochar yield and elemental composition in a biomass torrefaction process. Norway forest residues were chosen as feedstock and torrefied at different temperatures under nitrogen atmosphere in a thermogravimetric analyzer. Obtained data were modeled to predict the mass loss during torrefaction. Distributions of initial, intermediate and final solid products as well as torrefaction kinetic parameters are reported. Thereafter, a direct method to predict the elemental composition of biochar is introduced. The results show that the decomposition of initial biomass to form an intermediate solid has higher conversion rate than the degradation of the intermediate. Moreover, the predictions reproduce well the experimental thermogravimetric curves and show composition trends similar to the literature data. This method is useful for the design and optimization of industrial torrefaction processes with predictable biochar yield and elemental composition.

  4. Experimental determination of elemental compositions and densities of several common liquid scintillators

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez-Barquero, Leonor, E-mail: l.barquero@ciemat.e [Laboratorio de Metrologia de Radiaciones Ionizantes, CIEMAT, Avenida Complutense, 22, 28040 Madrid (Spain); Los Arcos, Jose M., E-mail: jm.losarcos@ciemat.e [Laboratorio de Metrologia de Radiaciones Ionizantes, CIEMAT, Avenida Complutense, 22, 28040 Madrid (Spain)

    2010-07-15

    New accurate data for the density and the elemental composition of several common liquid scintillators have been determined in this work. These data can be used to correctly determine or calculate the counting efficiency of radio-nuclides as well as to evaluate more accurately the uncertainties in LSC measurements due to variability on the composition of scintillators. The discrepancy between nominal densities at 20{sup o}C and the real densities at 20{sup o}C or 16{sup o}C can reach up to 4% among different batches of commercial scintillators all having the same nominal composition. Also significant differences in the elemental composition of commercial cocktails have been found compared to the nominal values. These differences range from 2% up to 260% depending on the element and the scintillator being measured.

  5. Structural elements of construction of individual and group exercises’ competition compositions in calisthenics

    Directory of Open Access Journals (Sweden)

    Kovalenko Y.O.

    2016-02-01

    Full Text Available Purpose: to analyze content of individual and group exercises’ competition compositions in calisthenics. Material: in the research HEEs’ girl students (n=20, junior sportswomen (n=10, experts (n=30, coaches with 10-40 years’ working experience participated. Results: it was found that temporary indicators permit to assess level of female gymnasts’ readiness for fulfillment of competition compositions’ elements; facilitated rational correlation of body and object’s elements of complexity. Quickness of preparation to elements and directly time of exercise’s fulfillment acquire great importance. In individual and group exercises the most important are distribution of sportswoman’s moving on all site with frequent change of directions. It was established that realization of structural elements facilitates full opening of female gymnast’s artistic image. Conclusions: for building of competition compositions coaches shall fully use indicators of space and time structural elements.

  6. Micro—PIXE analysis of trace element composition and their distribution in minerals of mantle peridotite

    Institute of Scientific and Technical Information of China (English)

    陈友红; 张旗; 等

    1996-01-01

    The proton microprobe and the quantitative micro-PIXE analysis technique are used to determine trace element composition and distribution in minerals of mantle peridotite,therefore,additional useful information is provided on the study of upper mantle mineral phase transformation.An example reported here is the study on the geochemical behavior of trace elements in minerals of Suoluoshu mantle peridotite from Shandong province,which was in the process of mineral phase transformation from spinel to garnet.The study shows that trace element composition and distribution display obvious change in minerals while the mineral phase is transformed from spinel to garnet.Most of the trace elements analyzed reside in clinopyroxene and spinel.However,garnet is nearly poor in all of these elements.This phenomenon is associated with the infiltration of soultion and the existence of micropgrained inclusions in minerals in the process of mantle metasomatism.

  7. Characterization of elemental and structural composition of corrosion scales and deposits formed in drinking water distribution systems.

    Science.gov (United States)

    Peng, Ching-Yu; Korshin, Gregory V; Valentine, Richard L; Hill, Andrew S; Friedman, Melinda J; Reiber, Steve H

    2010-08-01

    Corrosion scales and deposits formed within drinking water distribution systems (DWDSs) have the potential to retain inorganic contaminants. The objective of this study was to characterize the elemental and structural composition of extracted pipe solids and hydraulically-mobile deposits originating from representative DWDSs. Goethite (alpha-FeOOH), magnetite (Fe(3)O(4)) and siderite (FeCO(3)) were the primary crystalline phases identified in most of the selected samples. Among the major constituent elements of the deposits, iron was most prevalent followed, in the order of decreasing prevalence, by sulfur, organic carbon, calcium, inorganic carbon, phosphorus, manganese, magnesium, aluminum and zinc. The cumulative occurrence profiles of iron, sulfur, calcium and phosphorus for pipe specimens and flushed solids were similar. Comparison of relative occurrences of these elements indicates that hydraulic disturbances may have relatively less impact on the release of manganese, aluminum and zinc, but more impact on the release of organic carbon, inorganic carbon, and magnesium.

  8. Long-term aerosol measurements in Gran Canaria, Canary Islands: Particle concentration, sources and elemental composition

    Science.gov (United States)

    Gelado-Caballero, MaríA. D.; López-GarcíA, Patricia; Prieto, Sandra; Patey, Matthew D.; Collado, Cayetano; HéRnáNdez-Brito, José J.

    2012-02-01

    There are very few sets of long-term measurements of aerosol concentrations over the North Atlantic Ocean, yet such data is invaluable in quantifying atmospheric dust inputs to this ocean region. We present an 8-year record of total suspended particles (TSP) collected at three stations on Gran Canaria Island, Spain (Taliarte at sea level, Tafira 269 m above sea level (a.s.l.) and Pico de la Gorra 1930 m a.s.l.). Using wet and dry deposition measurements, the mean dust flux was calculated at 42.3 mg m-2 d-1. Air mass back trajectories (HYSPLIT, NOAA) suggested that the Sahara desert is the major source of African dust (dominant during 32-50% of days), while the Sahel desert was the major source only 2-10% of the time (maximum in summer). Elemental composition ratios of African samples indicate that, despite the homogeneity of the dust in collected samples, some signatures of the bedrocks can still be detected. Differences were found for the Sahel, Central Sahara and North of Sahara regions in Ti/Al, Mg/Al and Ca/Al ratios, respectively. Elements often associated with pollution (Pb, Cd, Ni, Zn) appeared to share a common origin, while Cu may have a predominantly local source, as suggested by a decrease in the enrichment factor (EF) of Cu during dust events. The inter-annual variability of dust concentrations is investigated in this work. During winter, African dust concentration measurements at the Pico de la Gorra station were found to correlate with the North Atlantic Oscillation (NAO) index.

  9. Simulation Studies on the Settlement of Composite Foundation with Contact Element of Zero Thickness

    Institute of Scientific and Technical Information of China (English)

    Dong Bichang; Wang Jingtao; Cheng Tao

    2005-01-01

    The various factors influencing the settlement of composite foundation have been more completely studied through numerical simulation. The influence on the settlement of composite foundation of the geometry and mechanical properties of the pile, soil, cushion, and the interface between pile and soil have been investigated through computer simulation, in which the contact elements with zero thickness are used. Some valuable conclusions for the settlement of composite foundation have been obtained: (1) The method using the contact element of zero thickness is successful when used in the simulation of the settlement of composite foundation; (2) Among the factors influencing the settlement of composite foundation, the compression modulus of the soil is the largest, and the cohesion of the soil is the second largest; (3) The effects on settlement of the internal friction angle of the soil, the elastic modulus, the radius, and the length of the pile, and the elestic modulus of the cushion are also more obvious.

  10. Stress relieving behaviour of flowable composite liners: A finite element analysis.

    Science.gov (United States)

    Anatavara, Sarida; Sitthiseripratip, Kriskrai; Senawongse, Pisol

    2016-01-01

    The purpose of this study was to investigate the consequences of using flowable composite as a liner beneath class I resin composite restorations on polymerization shrinkage stress and occlusal force. Models of class I resin composite restorations were generated. A control model received no flowable composite liner. Thirteen test models received different flowable composite liners with varying elastic modulus. Finite element analysis was used. The polymerization shrinkage of the resin composite and an occlusal force were simulated in the models. The stress and strain energy density in each model were investigated. The results demonstrated that all flowable composite linings were able to reduce polymerization shrinkage stress and occlusal force in enamel, dentin, the hybrid layer, and the adhesive layer to various degrees in tooth-restoration systems. Therefore, additional techniques may be applied to reduce the remaining stress and to ensure the long-term success of restorations.

  11. Characteristic Elemental Composition of Oil Pigments using Instrumental Neutron Activation Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Yong Sam; Kim, Sun Ha; Sun, Gwang Min; Lim, Jong Myung; Moon, Jong Hwa; Kim, Young Jin [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Lim, Sung Jin; Song, Yu Na; Kim, Ken [National Museum of Contemporary Art, Gwacheon (Korea, Republic of)

    2009-10-15

    The principal aim of this study is to identify the applicability of instrumental neutron activation analysis as a non-destructive examination tool for the quantitative composition analysis associated with authentication, restoration, and conservation of art objects in the field of cultural heritage. Generally, the chemical composition of pigments are associated with the colors such as white, yellow, orange, red, green, blue and black, and it varies with raw materials of pigments. According to the colors of a different pigments, chemical compositions are as follows; for example, white pigments were used for a mixture of Pb(CO{sub 3}){sub 2}, PbSO{sub 4}, PbO, Pb(OH){sub 2}, ZnO, ZnS, TiO{sub 2}, BaSO{sub 4}, CaCO{sub 3}, Al{sub 2}O{sub 3}, As{sub 2}S{sub 3}, etc.; black pigments were series of carbon black, borne ash, MnO+Mn{sub 2}O{sub 3}, etc.; red pigments were Fe{sub 2}O{sub 3}, Pb{sub 3}O{sub 4}, HgS, PbMo{sub 4}, CdS+CdSe, etc.; brown and yellow pigments were PbCrO{sub 4}, ZnCrO{sub 4}, CdS-ZnS, K{sub 3}[Co(NO{sub 2}){sub 6}], Pb(SbO{sub 3}){sub 2}, C{sub 19}H{sub 16}O{sub 11}Mg, SrCrO{sub 4}, etc.; green pigments were Cr{sub 2}O{sub 3}, Cr{sub 2}O(OH){sub 4}, Cu(C{sub 2}H{sub 3}O{sub 2})-2Cu(OH){sub 2}), Cr{sub 2}O{sub 3}-Al{sub 2}O{sub 3}-CoO, etc.; blue pigments were Fe{sub 4}[Fe(CN){sub 6}]{sub 3}, CoO-Al{sub 2}O{sub 3}, Na{sub 8}-{sub 10}Al{sub 6}Si{sub 6}O{sub 24}S{sub 2-4}, etc. This first step is to obtain quantitative data on the concentrations of major, minor and trace elements in oil pigments and to explain pigment sources by statistical treatment as reported in many literatures. The determination of major, minor and micro elements in the subject materials are essential in many fields of basic science and technology as well as commercial and industrial fields. In particular, direct analysis of a sample offers a more effective investigation method in these fields. Instrumental neutron activation analysis (INAA) has an inherent advantage of being a

  12. Three-dimensional hybrid-stress finite element analysis of composite laminates with cracks and cutouts

    Science.gov (United States)

    Wang, S. S.

    1985-01-01

    A three-dimensional hybrid-stress finite element analysis of composite laminates containing cutouts and cracks is presented. Fully three-dimensional, hexahedral isoparametric elements of the hybrid-stress model are formulated on the basis of the Hellinger-Reissner variational principle. Traction-free edges, cutouts, and crack surfaces are modeled by imposition of exact traction boundary conditions along element surfaces. Special boundary and surface elements are constructed by introducing proper constraints on assumed stress functions. The Lagrangian multiplier technique is used to enforce ply-interface continuity conditions in hybrid bimaterial composite elements for modeling the interface region in a composite laminate. Two examples are given to illustrate the capability of the present method of approach: (1) the well-known delamination problem in an angle-ply laminate, and (2) the important problem of a composite laminate containing a circular hole. Results are presented in detail for each case. Implications of interlaminar and intralaminar crack initiation, growth and fracture in composites containing cracks and cutouts are discussed.

  13. Finite element code development for modeling detonation of HMX composites

    Science.gov (United States)

    Duran, Adam V.; Sundararaghavan, Veera

    2017-01-01

    In this work, we present a hydrodynamics code for modeling shock and detonation waves in HMX. A stable efficient solution strategy based on a Taylor-Galerkin finite element (FE) discretization was developed to solve the reactive Euler equations. In our code, well calibrated equations of state for the solid unreacted material and gaseous reaction products have been implemented, along with a chemical reaction scheme and a mixing rule to define the properties of partially reacted states. A linear Gruneisen equation of state was employed for the unreacted HMX calibrated from experiments. The JWL form was used to model the EOS of gaseous reaction products. It is assumed that the unreacted explosive and reaction products are in both pressure and temperature equilibrium. The overall specific volume and internal energy was computed using the rule of mixtures. Arrhenius kinetics scheme was integrated to model the chemical reactions. A locally controlled dissipation was introduced that induces a non-oscillatory stabilized scheme for the shock front. The FE model was validated using analytical solutions for SOD shock and ZND strong detonation models. Benchmark problems are presented for geometries in which a single HMX crystal is subjected to a shock condition.

  14. Multiscale Finite-Element Modeling of Sandwich Honeycomb Composite Structures

    Directory of Open Access Journals (Sweden)

    Yu. I. Dimitrienko

    2014-01-01

    Full Text Available The paper presents a developed multi-scale model of sandwich honeycomb structures. The model allows us both to calculate effective elastic-strength characteristics of honeycomb and forced covering of sandwich, and to find a 3D stress-strain state of structures using the threedimensional elastic theory for non- homogeneous media. On the basis of finite element analysis it is shown, that under four-point bending the maximal value of bending and shear stresses in the sandwich honeycomb structures are realized in the zone of applied force and plate support. Here the local stress maxima approximately 2-3 times exceed the “engineering” theoretical plate values of bending and shear stresses in the middle of panel. It is established that at tests for fourpoint bending there is a failure of the honeycomb sandwich panels because of the local adhesion failure rather than because of the covering exfoliation off the honeycomb core in the middle of panel.

  15. Stress analysis of composite spur gear using the finite element approach

    Science.gov (United States)

    Vijayarangan, S.; Ganesan, N.

    1993-03-01

    Engineering components made of composite materials find increasing applications ranging from spacecraft to small instruments. Many types of gear pump use composite gears, however little literature is available on their use. In this paper results obtained by static stress analysis of composite gears using a three-dimensional finite element approach are presented. Performance of two orthotropic material gears are presented and compared with mild steel gear. From the results it is concluded that composite material such as graphite/epoxy can be thought of as a material for power transmission gears.

  16. Predicting the mineral composition of dust aerosols: Insights from elemental composition measured at the Izaña Observatory

    Science.gov (United States)

    Pérez García-Pando, Carlos; Miller, Ron L.; Perlwitz, Jan P.; Rodríguez, Sergio; Prospero, Joseph M.

    2016-10-01

    Regional variations of dust mineral composition are fundamental to climate impacts but generally neglected in climate models. A challenge for models is that atlases of soil composition are derived from measurements following wet sieving, which destroys the aggregates potentially emitted from the soil. Aggregates are crucial to simulating the observed size distribution of emitted soil particles. We use an extension of brittle fragmentation theory in a global dust model to account for these aggregates. Our method reproduces the size-resolved dust concentration along with the approximately size-invariant fractional abundance of elements like Fe and Al in the decade-long aerosol record from the Izaña Observatory, off the coast of West Africa. By distinguishing between Fe in structural and free forms, we can attribute improved model behavior to aggregation of Fe and Al-rich clay particles. We also demonstrate the importance of size-resolved measurements along with elemental composition analysis to constrain models.

  17. Elemental profile of edible mushrooms from a forest near a major Romanian city

    Directory of Open Access Journals (Sweden)

    Zsigmond Andreea R.

    2015-12-01

    Full Text Available We determined the elemental profile of 16 edible mushroom species from the Făget Forest, near Cluj-Napoca, and of 12 species from the Apuseni Mountains. One-way ANOVA showed no difference in the elemental content of mushrooms when the two regions were compared. Some species accumulated high amounts of trace elements, i.e. Boletus edulis (Ag, S, Zn, Macrolepiota procera (Cu, Lactarius volemus (Co, Russula emetica (Mn, Armillariella mellea, and Chantarellus cibarius (Cr. The cadmium content was the highest in the case of Leccinum scabrum and Boletus edulis. These two species presented elevated risk levels for all age-groups when they are consumed regularly.

  18. Dynamic modeling and analysis of the PZT-bonded composite Timoshenko beams: Spectral element method

    Science.gov (United States)

    Lee, Usik; Kim, Daehwan; Park, Ilwook

    2013-03-01

    The health of thin laminated composite beams is often monitored using the ultrasonic guided waves excited by wafer-type piezoelectric transducers (PZTs). Thus, for the smart composite beams which consist of a laminated composite base beam and PZT layers, it is very important to develop a very reliable mathematical model and to use a very accurate computational method to predict accurate dynamic characteristics at very high ultrasonic frequency. In this paper, the axial-bending-shear-lateral contraction coupled differential equations of motion are derived first by the Hamilton's principle with Lagrange multipliers. The smart composite beam is represented by a Timoshenko beam model by adopting the first-order shear deformation theory (FSDT) for the laminated composite base beam. The axial deformation of smart composite beam is improved by taking into account the effects of lateral contraction by adopting the concept of Mindlin-Herrmann rod theory. The spectral element model is then formulated by the variation approach from coupled differential equations of motion transformed into the frequency domain via the discrete Fourier transform. The high accuracy of the present spectral element model is verified by comparing with other solution methods: the finite element model developed in this paper and the commercial FEA package ANSYS. Finally the dynamics and wave characteristics of some example smart composite beams are investigated through the numerical studies.

  19. Major- and Trace-Element Concentrations in Soils from Northern California: Results from the Geochemical Landscapes Project Pilot Study

    Science.gov (United States)

    Morrison, Jean M.; Goldhaber, Martin B.; Holloway, JoAnn M.; Smith, David B.

    2008-01-01

    In 2004, the U.S. Geological Survey (USGS), the Geological Survey of Canada (GSC), and the Mexican Geological Survey (Servicio Geologico Mexicano, or SGM) initiated pilot studies in preparation for a soil geochemical survey of North America called the Geochemical Landscapes Project. The purpose of this project is to provide a better understanding of the variability in chemical composition of soils in North America. The data produced by this survey will be used to construct baseline geochemical maps for regions within the continent. Two initial pilot studies were conducted: (1) a continental-scale study involving a north-south and east-west transect across North America and (2) a regional-scale study. The pilot studies were intended to test and refine sample design, sampling protocols, and field logistics for the full continental soils geochemical survey. Smith and others (2005) reported the results from the continental-scale pilot study. The regional-scale California study was designed to represent more detailed, higher resolution geochemical investigations in a region of particular interest that was identified from the low-sample-density continental-scale survey. A 20,000-km2 area of northern California (fig. 1), representing a wide variety of topography, climate, and ecoregions, was chosen for the regional-scale pilot study. This study area also contains diverse geology and soil types and supports a wide range of land uses including agriculture in the Sacramento Valley, forested areas in portions of the Sierra Nevada, and urban/suburban centers such as Sacramento, Davis, and Stockton. Also of interest are potential effects on soil geochemistry from historical hard rock and placer gold mining in the foothills of the Sierra Nevada, historical mercury mining in the Coast Range, and mining of base-metal sulfide deposits in the Klamath Mountains to the north. This report presents the major- and trace-element concentrations from the regional-scale soil geochemical

  20. Sediment flux in the modern Indus River inferred from the trace element composition of detrital amphibole grains

    Science.gov (United States)

    Lee, Jae Il; Clift, Peter D.; Layne, Graham; Blum, Joel; Khan, Ali Athar

    2003-08-01

    The drainage basin of the modern Indus River is composed of tectonic blocks that include oceanic arc units in the Indus Suture, reworked components of the Indian Plate and various parts of the former southern margin of Eurasia against which India collided. We investigate how these source units contribute to the modern bedload of the Indus River using the major and trace element composition of single detrital amphibole grains. Sediments from rivers eroding restricted drainage areas were analyzed to characterize the major potential source units. Samples taken at various localities downstream in the main Indus River allow the evolving provenance to be assessed. When coupled with existing bulk sediment Nd isotope data, a basic mass balance for the river can be constructed. The rapidly exhuming Southern Karakoram Metamorphic Complex is the dominant sediment source to the deep-sea Indus Fan. Although the Nanga Parbat Massif, located adjacent to the river's course is also rapidly exhuming, this is not an important source of sediment, probably because of its small area and the tectonic mechanism for its exhumation. The trace element composition of detrital amphibole grains can be a useful provenance indicator, especially in the identification of dominant sources in a complex mixed sediment environment. Trace element ratios Nb/Zr and Ba/Y were identified as being especially useful in discriminating detrital amphibole grains from various sources.

  1. An application of a relational database system for high-throughput prediction of elemental compositions from accurate mass values.

    Science.gov (United States)

    Sakurai, Nozomu; Ara, Takeshi; Kanaya, Shigehiko; Nakamura, Yukiko; Iijima, Yoko; Enomoto, Mitsuo; Motegi, Takeshi; Aoki, Koh; Suzuki, Hideyuki; Shibata, Daisuke

    2013-01-15

    High-accuracy mass values detected by high-resolution mass spectrometry analysis enable prediction of elemental compositions, and thus are used for metabolite annotations in metabolomic studies. Here, we report an application of a relational database to significantly improve the rate of elemental composition predictions. By searching a database of pre-calculated elemental compositions with fixed kinds and numbers of atoms, the approach eliminates redundant evaluations of the same formula that occur in repeated calculations with other tools. When our approach is compared with HR2, which is one of the fastest tools available, our database search times were at least 109 times shorter than those of HR2. When a solid-state drive (SSD) was applied, the search time was 488 times shorter at 5 ppm mass tolerance and 1833 times at 0.1 ppm. Even if the search by HR2 was performed with 8 threads in a high-spec Windows 7 PC, the database search times were at least 26 and 115 times shorter without and with the SSD. These improvements were enhanced in a low spec Windows XP PC. We constructed a web service 'MFSearcher' to query the database in a RESTful manner. Available for free at http://webs2.kazusa.or.jp/mfsearcher. The web service is implemented in Java, MySQL, Apache and Tomcat, with all major browsers supported. sakurai@kazusa.or.jp Supplementary data are available at Bioinformatics online.

  2. RANDOM MICROSTRUCTURE FINITE ELEMENT METHOD FOR EFFECTIVE NONLINEAR PROPERTIES OF COMPOSITE MATERIALS

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Some theoretical methods have been reported to deal with nonlinear problems of composite materials but the accuracy is not so good. In the meantime, a lot of nonlinear problems are difficult to be managed by the theoretical methods. The present study aims to use the developed method, the random microstructure finite element method, to deal with these nonlinear problems. In this paper, the random microstructure finite element method is used to deal with all three kinds of nonlinear property problems of composite materials. The analyzed results suggest that the influences of the nonlinear phenomena on the effective properties of composite materials are significant and the random microstructure finite element method is an efficient tool to investigate the nonlinear problems.

  3. Effect of plant cultivation methods on content of major and trace elements in foodstuffs and retention in rats

    DEFF Research Database (Denmark)

    Kristensen, Mette; Østergaard, Lars F; Halekoh, Ulrich

    2008-01-01

    major and trace element contents of dried foodstuffs (carrots, kale, peas, potatoes and apples) grown in two consecutive years, as well as mineral retention determined in 36 rats (second generation in a multi-generation study) fed diets based on these foodstuffs from one year. RESULTS: Overall...

  4. Major and trace element geochemistry of Bay of Bengal sediments: Implications to provenances and their controlling factors

    Digital Repository Service at National Institute of Oceanography (India)

    Tripathy, G.R.; Singh, S.K.; Ramaswamy, V.

    –interglacial period. Factor analysis of these geochemical dataset ascertains dominant role of riverine supply of sediments in regulating the geochemistry of SK187/PC33 sediments. The Al-normalized major (K and Ti) and trace elemental (Cu and Cr) ratios of these marine...

  5. The leaching of major and trace elements from MSWI bottom ash as a function of pH and time

    NARCIS (Netherlands)

    Dijkstra, J.J.; Sloot, van der H.A.; Comans, R.N.J.

    2006-01-01

    In this paper, the leaching behaviour of major components (Al, Ca, SO4, Mg, Si, Fe, Na and DOC) and trace elements (Ni, Zn, Cd, Cu, Pb, Mo and Sb) from MSWI bottom ash is studied as a function of time over a wide range of pH, under pH-controlled conditions. Equilibrium geochemical modelling using th

  6. A consistent geochemical modelling approach for the leaching and reactive transport of major and trace elements in MSWI bottom ash

    NARCIS (Netherlands)

    Dijkstra, J.J.; Meeussen, J.C.L.; Sloot, van der H.A.; Comans, R.N.J.

    2008-01-01

    To improve the long-term environmental risk assessment of waste applications, a predictive "multi-surface" modelling approach has been developed to simultaneously predict the leaching and reactive transport of a broad range of major and trace elements (i.e., pH, Na, Al, Fe, Ca, SO4, Mg, Si, PO4, CO3

  7. A consistent geochemical modelling approach for the leaching and reactive transport of major and trace elements in MSWI bottom ash

    NARCIS (Netherlands)

    Dijkstra, J.J.; Meeussen, J.C.L.; Sloot, van der H.A.; Comans, R.N.J.

    2008-01-01

    To improve the long-term environmental risk assessment of waste applications, a predictive "multi-surface" modelling approach has been developed to simultaneously predict the leaching and reactive transport of a broad range of major and trace elements (i.e., pH, Na, Al, Fe, Ca, SO4, Mg, Si, PO4, CO3

  8. Low-velocity Impact Damage Analysis of Composite Laminates Using Self-adapting Delamination Element Method

    Institute of Scientific and Technical Information of China (English)

    Wang Lipeng; Yan Ying; Wu Dafang; Wu Hao

    2008-01-01

    On the basis of a 2D 4-node Mindlin shell element method, a novel self-adapting delamination finite element method is presented,which is developed to model the delamination damage of composite laminates. In the method, the sublaminate elements are generated automatically when the delamination damage occurs or extends. Thus, the complex process and state of delamination damage can be simulated practically with high efficiency for both analysis and modeling. Based on the self-adapting delamination method, linear dynamic finite element damage analysis is performed to simulate the low-velocity impact damage process of three types of mixed woven composite laminates. Taking the frictional force among sublaminations during delaminating and the transverse normal stress into account,the analytical results ate consistent with those of the experimental data.

  9. A lowest-order composite finite element exact sequence on pyramids

    Science.gov (United States)

    Ainsworth, Mark; Fu, Guosheng

    2017-09-01

    Composite basis functions for pyramidal elements on the spaces $H^1(\\Omega)$, $H(\\mathrm{curl},\\Omega)$, $H(\\mathrm{div},\\Omega)$ and $L^2(\\Omega)$ are presented. In particular, we construct the lowest-order composite pyramidal elements and show that they respect the de Rham diagram, i.e. we have an exact sequence and satisfy the commuting property. Moreover, the finite elements are fully compatible with the standard finite elements for the lowest-order Raviart-Thomas-N\\'ed\\'elec sequence on tetrahedral and hexahedral elements. That is to say, the new elements have the same degrees of freedom on the shared interface with the neighbouring hexahedral or tetrahedra elements, and the basis functions are conforming in the sense that they maintain the required level of continuity (full, tangential component, normal component, ...) across the interface. Furthermore, we study the approximation properties of the spaces as an initial partition consisting of tetrahedra, hexahedra and pyramid elements is successively subdivided and show that the spaces result in the same (optimal) order of approximation in terms of the mesh size $h$ as one would obtain using purely hexahedral or purely tetrahedral partitions.

  10. Numerical evaluation of bulk material properties of dental composites using two-phase finite element models.

    Science.gov (United States)

    Li, Jianying; Li, Haiyan; Fok, Alex S L; Watts, David C

    2012-09-01

    The aim of this study was to numerically evaluate the effects of filler contents and resin properties on the material properties of dental composites utilizing realistic 3D micromechanical finite element models. 3D micromechanical finite element models of dental composites containing irregular fillers with non-uniform sizes were created based on a large-scale, surrogate mixture fabricated from irregularly shaped stones and casting resin. The surrogate mixture was first scanned with a micro-CT scanner, and the images reassembled to produce a 3D finite element model. Different filler fractions were achieved by adjusting the matrix volume while keeping the fillers unchanged. Polymerization shrinkage, Young's modulus, Poisson's ratio and viscosity of the model composites were predicted using the finite element models, and their dependence on the filler fraction and material properties of the resin matrix were considered. Comparison of the numerical predictions with available experimental data and analytical models from the literature was performed. Increased filler fraction resulted in lower material shrinkage, higher Young's modulus, lower Poisson's ratio and higher viscosity in the composite. Predicted shrinkage and Young's modulus agreed well with the experimental data and analytical predictions. The McGee-McCullough model best fit the shrinkage and Young's modulus predicted by the finite element method. However, a new parameter, used as the exponent of the filler fraction, had to be introduced to the McGee-McCullough model to better match the predicted viscosity and Poisson's ratio with those from the finite element analysis. Realistic micro-structural finite element models were successfully applied to study the effects of filler fraction and matrix properties on a wide range of mechanical properties of dental composites with irregular fillers. The results can be used to direct the design of such materials to achieve the desired mechanical properties. Published by

  11. Fire and brimstone: the microbially mediated formation of elemental sulfur nodules from an isotope and major element study in the paleo-Dead Sea.

    Directory of Open Access Journals (Sweden)

    Tom Bishop

    Full Text Available We present coupled sulfur and oxygen isotope data from sulfur nodules and surrounding gypsum, as well as iron and manganese concentration data, from the Lisan Formation near the Dead Sea (Israel. The sulfur isotope composition in the nodules ranges between -9 and -11‰, 27 to 29‰ lighter than the surrounding gypsum, while the oxygen isotope composition of the gypsum is constant around 24‰. The constant sulfur isotope composition of the nodule is consistent with formation in an 'open system'. Iron concentrations in the gypsum increase toward the nodule, while manganese concentrations decrease, suggesting a redox boundary at the nodule-gypsum interface during aqueous phase diagenesis. We propose that sulfur nodules in the Lisan Formation are generated through bacterial sulfate reduction, which terminates at elemental sulfur. We speculate that the sulfate-saturated pore fluids, coupled with the low availability of an electron donor, terminates the trithionate pathway before the final two-electron reduction, producing thionites, which then disproportionate to form abundant elemental sulfur.

  12. Fire and brimstone: the microbially mediated formation of elemental sulfur nodules from an isotope and major element study in the paleo-Dead Sea.

    Science.gov (United States)

    Bishop, Tom; Turchyn, Alexandra V; Sivan, Orit

    2013-01-01

    We present coupled sulfur and oxygen isotope data from sulfur nodules and surrounding gypsum, as well as iron and manganese concentration data, from the Lisan Formation near the Dead Sea (Israel). The sulfur isotope composition in the nodules ranges between -9 and -11‰, 27 to 29‰ lighter than the surrounding gypsum, while the oxygen isotope composition of the gypsum is constant around 24‰. The constant sulfur isotope composition of the nodule is consistent with formation in an 'open system'. Iron concentrations in the gypsum increase toward the nodule, while manganese concentrations decrease, suggesting a redox boundary at the nodule-gypsum interface during aqueous phase diagenesis. We propose that sulfur nodules in the Lisan Formation are generated through bacterial sulfate reduction, which terminates at elemental sulfur. We speculate that the sulfate-saturated pore fluids, coupled with the low availability of an electron donor, terminates the trithionate pathway before the final two-electron reduction, producing thionites, which then disproportionate to form abundant elemental sulfur.

  13. Heavy metals and trace elements in atmospheric fall-out: Their relationship with topsoil and wheat element composition

    Energy Technology Data Exchange (ETDEWEB)

    Bermudez, Gonzalo M.A., E-mail: gbermudez@com.uncor.edu [Instituto Multidisciplinario de Biologia Vegetal (IMBIV), CONICET (Argentina); Catedra de Quimica General, FCEFyN, Universidad Nacional de Cordoba, Avda. Velez Sarsfield 1611, Ciudad Universitaria (X5016 GCA), Cordoba (Argentina); Jasan, Raquel; Pla, Rita [Tecnicas Analiticas Nucleares, Comision Nacional de Energia Atomica (CAE), Presbitero Gonzalez y Aragon N Degree-Sign 15 (B1802AYA), Ezeiza (Argentina); Pignata, Maria L. [Instituto Multidisciplinario de Biologia Vegetal (IMBIV), CONICET (Argentina); Catedra de Quimica General, FCEFyN, Universidad Nacional de Cordoba, Avda. Velez Sarsfield 1611, Ciudad Universitaria (X5016 GCA), Cordoba (Argentina)

    2012-04-30

    Highlights: Black-Right-Pointing-Pointer Metal and trace element deposition rates and concentrations in bulk samples. Black-Right-Pointing-Pointer Anthropogenic vs. natural sources were identified using enrichment factors and PCA. Black-Right-Pointing-Pointer Anthropogenic sources for Ca, Cd, Cu, Fe, Mn, Ni, Pb, Sb, U, Zn and lanthanides. Black-Right-Pointing-Pointer Main sources were a cement plant, chemical-mechanical industries, cities and mining. Black-Right-Pointing-Pointer Metals in wheat grain were predicted by soil and bulk deposition composition. - Abstract: The objectives of this study were to determine the average concentrations and deposition rates of 28 elements in atmospheric bulk deposition and to elucidate associations among topsoil, bulk deposition and wheat element composition. The fluxes of arsenic (As), copper (Cu), lead (Pb) and zinc (Zn) deposition in Cordoba were higher than in other agro-ecosystems, which reflects both natural (geochemistry and topsoil removal) and anthropogenic sources. High lanthanide, uranium (U) and thorium (Th) concentrations revealed the impact of an open cast uranium mine. The highest enrichment factors (EF) were those of Cu, Pb, Zn and nickel (Ni), with calcium (Ca) being the most prominent in the surroundings of a cement plant. Industries and the transport of airborne urban pollutants were the main anthropogenic sources for Ca, Cu, Ni, Pb, Zn, cadmium (Cd), iron (Fe), manganese (Mn) and antimony (Sb). The concentrations of metals in wheat grain were predicted using the topsoil and atmospheric fall-out composition with R{sup 2} = 0.90, with the latter being the best explanatory variable. The present study highlights the potential health hazards of wheat consumption (Environmental Protection Agency) by the assessment of heavy metals in bulk atmospheric deposition.

  14. Structural analysis of composite wind turbine blades nonlinear mechanics and finite element models with material damping

    CERN Document Server

    Chortis, Dimitris I

    2013-01-01

    This book concerns the development of novel finite elements for the structural analysis of composite beams and blades. The introduction of material damping is also an important aspect of composite structures and it is presented here in terms of their static and dynamic behavior. The book thoroughly presents a new shear beam finite element, which entails new blade section mechanics, capable of predicting structural blade coupling due to composite coupling and/or internal section geometry. Theoretical background is further expanded towards the inclusion of nonlinear structural blade models and damping mechanics for composite structures. The models effectively include geometrically nonlinear terms due to large displacements and rotations, improve the modeling accuracy of very large flexible blades, and enable the modeling of rotational stiffening and buckling, as well as, nonlinear structural coupling. Validation simulations on specimen level study the geometric nonlinearities effect on the modal frequencies and...

  15. Structural Performance of Light Weight Multicellular FRP Composite Bridge Deck Using Finite Element Analysis

    Institute of Scientific and Technical Information of China (English)

    Woraphot Prachasaree; Pongsak Sookmanee

    2012-01-01

    Fiber reinforced polymer (FRP) composite materials having advantages such as higher strength to weight than conventional engineering materials,non-corrosiveness and modularization,which should help engineers to obtain more efficient and cost effective structural materials and systems.Currently,FRP composites are becoming more popular in civil engineering applications.The objectives of this research are to study performance and behavior of light weight multi-cellular FRP composite bridge decks (both module and system levels) under various loading conditions through finite element modeling,and to validate analytical response of FRP composite bridge decks with data from laboratory evaluations.The relative deflection,equivalent flexural rigidity,failure load (mode) and load distribution factors (LDF) based on FE results have been compared with experimental data and discussed in detail.The finite element results showing good correlations with experimental data are presented in this work.

  16. Arbuscular mycorrhizal fungi in phytoremediation of contaminated areas by trace elements: mechanisms and major benefits of their applications.

    Science.gov (United States)

    Cabral, Lucélia; Soares, Claúdio Roberto Fonsêca Sousa; Giachini, Admir José; Siqueira, José Oswaldo

    2015-11-01

    In recent decades, the concentration of trace elements has increased in soil and water, mainly by industrialization and urbanization. Recovery of contaminated areas is generally complex. In that respect, microorganisms can be of vital importance by making significant contributions towards the establishment of plants and the stabilization of impacted areas. Among the available strategies for environmental recovery, bioremediation and phytoremediation outstand. Arbuscular mycorrhizal fungi (AMF) are considered the most important type of mycorrhizae for phytoremediation. AMF have broad occurrence in contaminated soils, and evidences suggest they improve plant tolerance to excess of certain trace elements. In this review, the use of AMF in phytoremediation and mechanisms involved in their trace element tolerance are discussed. Additionally, we present some techniques used to study the retention of trace elements by AMF, as well as a summary of studies showing major benefits of AMF for phytoremediation.

  17. Postmodern landscape architecture: theoretical, compositional characteristics and design elements with the analysis of 25 projects

    Directory of Open Access Journals (Sweden)

    Eplényi Anna

    2015-12-01

    Full Text Available This paper endeavours to highlight three aspects of postmodern landscape design: theoretical basis, composition and design elements. Postmodern theories, philosophy influenced the language of the postmodern landscape architecture and got materialized in the use of narratives, eclecticism, the Rhizome-principle. Postmodern landscape composition can be associated with anti-hierarchy, unusual structures, landforms, and playful moods. Postmodern design elements consist of the strong graphical use of colour and pavements, bizarre water features, unusual structures and buildings, postmodern sculptures and thematic garden details. 25 analysed projects try to capture the essence of postmodernism in landscape architecture as well as to reveal points of intersection within these projects.

  18. Trace and Major Element Chemistry Across the Cretaceous/Tertiary Boundary at Stevns Klint

    Science.gov (United States)

    Graup, G.; Spettel, B.

    1992-07-01

    INAA measurements of samples obtained by high-resolution stratigraphy on a mm scale reveal considerable variations in element concentrations across the boundary with their respective maxima stratified in distinct sublayers (Graup et al., 1992). These results suggest that measurements of bulk boundary samples a few cm thick may be inappropriate as concentration variations and element ratios would be leveled out pretending a single geochemical signal. Having investigated a sample comprising sublayers B, C, and D (Fig. 1), Alvarez et al.(1980) acknowledge that "no information is available on the chemical variations within the boundary." This kind of information is given below and shown in Fig. 1 (sublayers A and B are drafted in double scale). From the main lithologic characteristics of Maastrichtian to Paleocene sediments (Schmitz, 1988; Graup et al., 1992) it is readily deduced that Eh and pH conditions in the marine environment changed from oxic-mildly alkaline with normal carbonate sedimentation (Q-M) to anoxic-(mildly) acid with deposition of pyrite spherules (A3), organic material, and clay minerals in the Fish Clay (A-D), followed by a restoration of oxic-alkaline conditions depositing the Cerithium limestone (E- I). The element distribution across the boundary obviously mirrors these alternating environmental conditions: compounds soluble under acid and reducing conditions like Ca-carbonate and Mn are strongly depleted in the Fish Clay (Fig. 1A), whereas compounds stable and insoluble under these conditions are highly enriched (Fig. 1B). The opposite holds true for the calcareous sediments. Across the boundary, enhanced element concentrations are not evenly distributed but appear to be stratified with maximum concentrations in three distinct sublayers for the following elements: (1) A1 (hard clay): peak concentrations for REE (La 72 ppm) and U (45.5 ppm) as compared to 13 ppm La and 2 ppm U in sublayer A2 immediately above. (2) A3 (pyrite spherules): peak

  19. Mechanical tests, static and modal finite element analysis for MWCNT composite materials

    Directory of Open Access Journals (Sweden)

    Daniela BARAN

    2015-03-01

    Full Text Available The main purpose of this paper is to develop some numerical experiences based on mechanical tests performed on MWCNT (Multi-wall carbon nanotubes composites created in our Material compartment using finite element commercial codes (here NASTRAN. The results of numerical simulations are consistent with the laboratory tests and encourage us to continue to improve the models using NASTRAN capabilities in order to obtain a realistic simulation of aeronautical structures made of such composites, considering their special properties.

  20. Thermal Stress Analysis of Laminated Composite Plates using Shear Flexible Element

    Directory of Open Access Journals (Sweden)

    M. Ganapathi

    1996-01-01

    Full Text Available Using degree Centigrade shear flexible QUAD-9 plate element, stresses and deflections in composite laminated plates due to thermal loads analysed. A formulation based on first order shear deformation theory has been employed for the analysis. The effects of various parameters, such as ply-angle, number of layers, thickness and aspect ratios on stresses and deflections are brought out. The present formulation is being extended for studying composite shell structures.

  1. Finite element model updating of natural fibre reinforced composite structure in structural dynamics

    Directory of Open Access Journals (Sweden)

    Sani M.S.M.

    2016-01-01

    Full Text Available Model updating is a process of making adjustment of certain parameters of finite element model in order to reduce discrepancy between analytical predictions of finite element (FE and experimental results. Finite element model updating is considered as an important field of study as practical application of finite element method often shows discrepancy to the test result. The aim of this research is to perform model updating procedure on a composite structure as well as trying improving the presumed geometrical and material properties of tested composite structure in finite element prediction. The composite structure concerned in this study is a plate of reinforced kenaf fiber with epoxy. Modal properties (natural frequency, mode shapes, and damping ratio of the kenaf fiber structure will be determined using both experimental modal analysis (EMA and finite element analysis (FEA. In EMA, modal testing will be carried out using impact hammer test while normal mode analysis using FEA will be carried out using MSC. Nastran/Patran software. Correlation of the data will be carried out before optimizing the data from FEA. Several parameters will be considered and selected for the model updating procedure.

  2. Major, Trace, and Rare Earth Element Abudances in Boninitic Lavas from the Ogasawara Forearc

    OpenAIRE

    1985-01-01

    Dredged andesites and dacites from the Ogasawara forearc contain high abundances of MgO at high SiO2, high K2O, low rare earth element abundances and flat patterns, and very low TiO2 contents. The chemical character and geologic setting support the interpretation that these lavas are evolved members of the boninite series formed by high degrees of partial melting of a previously depleted arc source, followed by enrichment in K, Th, and large-ion lithophile elements, and finally differentiated...

  3. The elemental composition of the Sun III. The neutron capture elements Cu to Th

    CERN Document Server

    Grevesse, Nicolas; Asplund, Martin; Sauval, A Jacques

    2014-01-01

    We re-evaluate the abundances of the elements in the Sun from copper ($Z=29$) to thorium ($Z=90$). Our results are mostly based on neutral and singly-ionised lines in the solar spectrum. We use the latest 3D hydrodynamic solar model atmosphere, and in a few cases also correct for departures from local thermodynamic equilibrium (NLTE). In order to minimise statistical and systematic uncertainties, we make stringent line selections, employ the highest-quality observational data and carefully assess oscillator strengths, hyperfine constants and isotopic separations available in the literature, for every line included in our analysis. Our results are typically in good agreement with the abundances in the most pristine meteorites, but there are some interesting exceptions. This analysis constitutes both a full exposition and a slight update of the relevant parts of the preliminary results we presented in Asplund, Grevesse, Sauval & Scott (arXiv:0909.0948), including full line lists and details of all input dat...

  4. Inductively coupled plasma optical emission spectrometric determination of trace elements in sediments after sequential selective extraction: effects of reagents and major elements on the analytical signal.

    Science.gov (United States)

    Grotti, Marco; Ianni, Carmela; Frache, Roberto

    2002-07-19

    The interfering effects due to the reagents and matrix elements associated with a four step sequential extraction procedure on ICPOES determination of trace elements were investigated in a systematic way. The emission lines were selected in order to include the most interesting elements for environmental studies (Zn, Pb, Ni, Cr, V and Cu) and the concentrations ranged according with the values occurring in the real samples. In order to distinguish between chemical and physical interfering effects, the Mg 280.270-Mg 285.213 line intensity ratio was measured, in each condition. Both pneumatic and ultrasonic nebulization were considered for comparison. It was found that both the elements which constitute the sample and the reagents which are added during the sample preparation steps significantly influence the emission intensity of all the analytes, depending on the analytical concentration and the nebulization system. Generally, the signal variations were higher with ultrasonic nebulization. Concerning the interference mechanism, it was found that the effect of the major elements (Na, K, Mg, Ca, Al and Fe) is essentially related to a change of the aerosol generation and transport processes. Differently, acetic acid, ammonium acetate and hydroxylamine hydrochloride significantly improved the plasma excitation conditions, depending on their concentration. A change of the sample introduction efficiency due to the presence of these reagents was also evident. On the contrary, the effect of hydrochloric and nitric acid emerged to be related only to the processes occurring in the sample introduction system.

  5. Numerical Homogenization of Protective Ceramic Composite Layers using the Hybrid Finite-Discrete Element Methods

    Directory of Open Access Journals (Sweden)

    Zainorizuan Mohd Jaini

    2013-12-01

    Full Text Available Innovative technologies have resulted in more effective ceramic composite as high rate loading-resistance and protective layer. The ceramic composite layer consists of ceramic frontal plate that bonded by softer-strong reinforced polymer network, consequently gains the heterogeneous condition. These materials serve specific purposes of defeating high rate loading and maintaining the structural integrity of the layer. Further due to the lack of a constituent material and tedious problem in heterogonous material modelling, a numerical homogenization is employed to analyse the isotropic material properties of ceramic composite layer in homogenous manner. The objective of this study is to derive a constitutive law of the ceramic composite using the multi-scale analysis. Two-dimensional symmetric macrostructure of the ceramic composite was numerically modelled using the hybrid finite-discrete element method to investigate the effective material properties and strength profile. The macrostructure was modelled as brittle material with nonlinear material properties. The finite element method is incorporated with a Rankine-Rotating Crack approach and discrete element to model the fracture onset. The prescribed uniaxial and biaxial loadings were imposed along the free boundaries to create different deformations. Due to crack initiation on the macrostructure, the averaged stresses were calculated to plot the stress-strain curves and the effective yield stress surface. From the multi-scale analysis, the rate-dependency of Mohr-Coulomb constitutive law was derived for the ceramic composite layer.

  6. Major Element Analysis of the Target Rocks at Meteor Crater, Arizona

    Science.gov (United States)

    See, Thomas H.; Hoerz, Friedrich; Mittlefehldt, David W.; Varley, Laura; Mertzman, Stan; Roddy, David

    2002-01-01

    We collected approximately 400 rock chips in continuous vertical profile at Meteor Crater, Arizona, representing, from bottom to top, the Coconino, Toroweap, Kaibab, and Moenkopi Formations to support ongoing compositional analyses of the impact melts and their stratigraphic source depth(s) and other studies at Meteor Crater that depend on the composition of the target rocks. These rock chips were subsequently pooled into 23 samples for compositional analysis by XRF (x ray fluorescence) methods, each sample reflecting a specific stratigraphic "subsection" approximately 5-10 in thick. We determined the modal abundance of quartz, dolomite, and calcite for the entire Kaibab Formation at vertical resolutions of 1-2 meters. The Coconino Formation composes the lower half of the crater cavity. It is an exceptionally pure sandstone. The Toroweap is only two inches thick and compositionally similar to Coconino, therefore, it is not a good compositional marker horizon. The Kaibab Formation is approximately 80 in thick. XRD (x ray diffraction) studies show that the Kaibab Formation is dominated by dolomite and quartz, albeit in highly variable proportions; calcite is a minor phase at best. The Kaibab at Meteor Crater is therefore a sandy dolomite rather than a limestone, consistent with pronounced facies changes in the Permian of SE Arizona over short vertical and horizontal distances. The Moenkopi forms the 12 in thick cap rock and has the highest Al2O3 and FeO concentrations of all target rocks. With several examples, we illustrate how this systematic compositional and modal characterization of the target ideologies may contribute to an understanding of Meteor Crater, such as the depth of its melt zone, and to impact cratering in general, such as the liberation of CO2 from shocked carbonates.

  7. The majority of primate-specific regulatory sequences are derived from transposable elements.

    Directory of Open Access Journals (Sweden)

    Pierre-Étienne Jacques

    2013-05-01

    Full Text Available Although emerging evidence suggests that transposable elements (TEs have contributed novel regulatory elements to the human genome, their global impact on transcriptional networks remains largely uncharacterized. Here we show that TEs have contributed to the human genome nearly half of its active elements. Using DNase I hypersensitivity data sets from ENCODE in normal, embryonic, and cancer cells, we found that 44% of open chromatin regions were in TEs and that this proportion reached 63% for primate-specific regions. We also showed that distinct subfamilies of endogenous retroviruses (ERVs contributed significantly more accessible regions than expected by chance, with up to 80% of their instances in open chromatin. Based on these results, we further characterized 2,150 TE subfamily-transcription factor pairs that were bound in vivo or enriched for specific binding motifs, and observed that TEs contributing to open chromatin had higher levels of sequence conservation. We also showed that thousands of ERV-derived sequences were activated in a cell type-specific manner, especially in embryonic and cancer cells, and we demonstrated that this activity was associated with cell type-specific expression of neighboring genes. Taken together, these results demonstrate that TEs, and in particular ERVs, have contributed hundreds of thousands of novel regulatory elements to the primate lineage and reshaped the human transcriptional landscape.

  8. Shear-flexible finite-element models of laminated composite plates and shells

    Science.gov (United States)

    Noor, A. K.; Mathers, M. D.

    1975-01-01

    Several finite-element models are applied to the linear static, stability, and vibration analysis of laminated composite plates and shells. The study is based on linear shallow-shell theory, with the effects of shear deformation, anisotropic material behavior, and bending-extensional coupling included. Both stiffness (displacement) and mixed finite-element models are considered. Discussion is focused on the effects of shear deformation and anisotropic material behavior on the accuracy and convergence of different finite-element models. Numerical studies are presented which show the effects of increasing the order of the approximating polynomials, adding internal degrees of freedom, and using derivatives of generalized displacements as nodal parameters.

  9. Investigation of Product Performance of Al-Metal Matrix Composites Brake Disc using Finite Element Analysis

    Science.gov (United States)

    Fatchurrohman, N.; Marini, C. D.; Suraya, S.; Iqbal, AKM Asif

    2016-02-01

    The increasing demand of fuel efficiency and light weight components in automobile sectors have led to the development of advanced material parts with improved performance. A specific class of MMCs which has gained a lot of attention due to its potential is aluminium metal matrix composites (Al-MMCs). Product performance investigation of Al- MMCs is presented in this article, where an Al-MMCs brake disc is analyzed using finite element analysis. The objective is to identify the potentiality of replacing the conventional iron brake disc with Al-MMCs brake disc. The simulation results suggested that the MMCs brake disc provided better thermal and mechanical performance as compared to the conventional cast iron brake disc. Although, the Al-MMCs brake disc dissipated higher maximum temperature compared to cast iron brake disc's maximum temperature. The Al-MMCs brake disc showed a well distributed temperature than the cast iron brake disc. The high temperature developed at the ring of the disc and heat was dissipated in circumferential direction. Moreover, better thermal dissipation and conduction at brake disc rotor surface played a major influence on the stress. As a comparison, the maximum stress and strain of Al-MMCs brake disc was lower than that induced on the cast iron brake disc.

  10. Elemental composition in surface snow from the ultra-high elevation area of Mt. Qomolangma (Everest)

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    A total of 14 surface snow (0-10 cm) samples were collected along the climbing route (6500-8844 m a.s.l.) on the northern slope of Mt. Qomolangma in May, 2005. Analysis of elemental concentrations in these samples showed that there are no clear trends for element variations with elevation due to redistribution of surface snow by strong winds during spring. In addition, local crustal aerosol inputs also have an influence on elemental composition of surface snow. Comparison between elemental concentration datasets of 2005 and 1997 indicated that data from 2005 were of higher quality. Elemental concentrations (especially for heavy metals) at Mt. Qomolangma are comparable with polar sites, and far lower than large cities. This indicates that anthropogenic activities and heavy metal pollution have little effect on the Mt. Qomolangma atmospheric environment, which can be representative of the background atmospheric environment.

  11. ESL Based Cylindrical Shell Elements with Hierarchical Shape Functions for Laminated Composite Shells

    Directory of Open Access Journals (Sweden)

    Jae S. Ahn

    2015-01-01

    Full Text Available We introduce higher-order cylindrical shell element based on ESL (equivalent single-layer theory for the analysis of laminated composite shells. The proposed elements are formulated by the dimensional reduction technique from three-dimensional solid to two-dimensional cylindrical surface with plane stress assumption. It allows the first-order shear deformation and considers anisotropic materials due to fiber orientation. The element displacement approximation is established by the integrals of Legendre polynomials with hierarchical concept to ensure the C0-continuity at the interface between adjacent elements as well as C1-continuity at the interface between adjacent layers. For geometry mapping, cylindrical coordinate is adopted to implement the exact mapping of curved shell configuration with a constant curvature with respect to any direction in the plane. The verification and characteristics of the proposed element are investigated through the analyses of three cylindrical shell problems with different shapes, loadings, and boundary conditions.

  12. Finite element analysis of WC-Al2O3 composites

    Science.gov (United States)

    Patel, Satyanarayan; Vaish, Rahul

    2014-02-01

    Object oriented finite element analysis (OOF2) is used to estimate the thermal and mechanical properties of WC-Al2O3 composites. In the present work, five compositions of 10%, 20%, 30%, 40% and 50% Al2O3 (by volume) are studied. Young's modulus, thermal conductivity and thermal expansion coefficient are estimated using OOF2 and compared with other known analytical methods. Stress and strain contours are plotted to study the thermal and mechanical behavior of composites. It is found that the stresses are largely concentrated at the interfaces of the WC-Al2O3 phases.

  13. Earth's moderately volatile element composition may not be chondritic: Evidence from In, Cd and Zn

    Science.gov (United States)

    Wang, Zaicong; Laurenz, Vera; Petitgirard, Sylvain; Becker, Harry

    2016-02-01

    Current models assume that siderophile volatile elements (SVE) are depleted in bulk Earth to the same extent as lithophile elements of similar volatility. The observed additional depletion of many SVE relative to lithophile elements in the bulk silicate Earth (BSE) is ascribed to partitioning of SVE into Earth's core. However, the assumption of similar volatility of moderately volatile elements during Earth formation processes as in solar gas is quite uncertain. Here, these assumptions will be tested by assessing abundances and ratios of indium and cadmium in the BSE using new data on mantle rocks, and the application of high- and low-pressure-temperature metal-silicate partitioning data. New bulk rock abundance data of In and Cd obtained on bulk rocks of peridotite tectonites and xenoliths by isotope dilution refine previous results inferred from basalts and in-situ analyses of silicate minerals in peridotite xenoliths. The CI chondrite-normalized abundance of In in the BSE is similar to zinc and is 3-4 times higher than Cd. New and published low- and high-P-T metal-silicate partitioning data indicate that, during core formation at a range of conditions, In is always more siderophile than Zn and Cd. Adding the fraction of these elements in Earth's core to the BSE results in bulk Earth compositions that yield higher CI chondrite normalized abundances of In in the bulk Earth compared to Zn and Cd. Because In is more volatile than Zn and Cd in gas of solar composition, suprachondritic In/Zn and In/Cd in the bulk Earth suggest that during formation of Earth or its building materials, the volatilities of these elements and perhaps other volatile elements likely have changed significantly (i.e. In became less volatile). The results also suggest that known carbonaceous chondrites likely did not deliver the main volatile element-rich fraction of the Earth. Various arguments suggest that the loss of moderately volatile elements during planetary accretion should be limited

  14. Hydrochemistry (major and trace elements) of Lake Malawi (Nyasa), Tanzanian Northern Basin: local versus global considerations

    OpenAIRE

    Branchu, P.; L. Bergonzini; Ambrosi, J.-P.; Cardinal, D.; Delalande, M.; E. Pons-Branchu; Benedetti, M

    2010-01-01

    This paper presents the first inventory of dissolved minor and trace element (F, Al, Fe, Mn, Ba, Cd, Cr, Cu, Pb, Mo, Bi, Sr, Zn) concentrations in Lake Malawi, the second largest African lake. Sampling was carried out during 1993 dry season in the northern part of the lake. Trace metal concentrations were measured, together with Ca, Mg, Na, K, Cl, SO4, Alkalinity and Si, along three profiles in the lake northern extremity, in five tributar...

  15. Free vibration of composite skewed cylindrical shell panel by finite element method

    Science.gov (United States)

    Haldar, Salil

    2008-03-01

    In this paper a composite triangular shallow shell element has been used for free vibration analysis of laminated composite skewed cylindrical shell panels. In the present element first-order shear deformation theory has been incorporated by taking transverse displacement and bending rotations as independent field variables. The interpolation function used to approximate transverse displacement is one order higher than for bending rotations. This has made the element free from locking in shear. Two types of mass lumping schemes have been recommended. In one of the mass lumping scheme the effect of rotary inertia has been incorporated in the element formulations. Free vibration of skewed composite cylindrical shell panels having different thickness to radius ratios ( h/R=0.01-0.2), length to radius ratios ( L/R), number of layers and fiber orientation angles have been analyzed following the shallow shell method. The results for few examples obtained in the present analysis have compared with the published results. Some new results of composite skewed cylindrical shell panels have been presented which are expected to be useful to future research in this direction.

  16. Comparative studies of elemental composition in leaves and flowers of Catharanthus roseus growing in Bangladesh

    Directory of Open Access Journals (Sweden)

    Shahin Aziz

    2016-01-01

    Conclusions: The elemental composition in both leaves and flowers of C. roseus were found to be different. Therefore, different parts of this medicinal plant are enriched in some micro and macro nutrients like Fe, Ca, Na, K, Zn, which are very important for biological metabolic system as well as human health.

  17. Fast sequential multi-element determination of major and minor elements in environmental samples and drinking waters by high-resolution continuum source flame atomic absorption spectrometry.

    Science.gov (United States)

    Gómez-Nieto, Beatriz; Gismera, Ma Jesús; Sevilla, Ma Teresa; Procopio, Jesús R

    2015-01-07

    The fast sequential multi-element determination of 11 elements present at different concentration levels in environmental samples and drinking waters has been investigated using high-resolution continuum source flame atomic absorption spectrometry. The main lines for Cu (324.754 nm), Zn (213.857 nm), Cd (228.802 nm), Ni (232.003 nm) and Pb (217.001 nm), main and secondary absorption lines for Mn (279.482 and 279.827 nm), Fe (248.327, 248.514 and 302.064 nm) and Ca (422.673 and 239.856 nm), secondary lines with different sensitivities for Na (589.592 and 330.237 nm) and K (769.897 and 404.414 nm) and a secondary line for Mg (202.582 nm) have been chosen to perform the analysis. A flow injection system has been used for sample introduction so sample consumption has been reduced up to less than 1 mL per element, measured in triplicate. Furthermore, the use of multiplets for Fe and the side pixel registration approach for Mg have been studied in order to reduce sensitivity and extend the linear working range. The figures of merit have been calculated and the proposed method was applied to determine these elements in a pine needles reference material (SRM 1575a), drinking and natural waters and soil extracts. Recoveries of analytes added at different concentration levels to water samples and extracts of soils were within 88-115% interval. In this way, the fast sequential multi-element determination of major and minor elements can be carried out, in triplicate, with successful results without requiring additional dilutions of samples or several different strategies for sample preparation using about 8-9 mL of sample. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. Permafrost coverage, watershed area and season control of dissolved carbon and major elements in western Siberian rivers

    Directory of Open Access Journals (Sweden)

    O. S. Pokrovsky

    2015-07-01

    Full Text Available Analysis of dissolved organic and inorganic carbon (DOC and DIC, respectively, pH, Na, K, Ca, Mg, Cl, SO4 and Si in ~ 100 large and small rivers (2 of western Siberia sampled in winter, spring, summer and autumn over a more than 1500 km latitudinal gradient allowed for establishing the main environmental factors controlling the transport of dissolved river components in this environmentally important region, comprising continuous, discontinuous, sporadic and permafrost-free zones. There was significant latitudinal trend consisting in general decrease of DOC, DIC, SO4, and major cation (Ca, Mg, Na, K concentrations northward, reflecting the interplay between groundwater feeding (detectable mostly in the permafrost-free zone, south of 60° N and surface flux (in the permafrost-bearing zone. The trend of inorganic components was mostly pronounced in winter and less visible in spring, whereas for DOC, the trend of concentration decrease with latitude was absent in winter, and less pronounced in the spring flood than in the summer baseflow. The latitudinal trends persisted over all river watershed sizes, from 10 000 km2. This suggested that in addition to groundwater feeding of the river, there was a significant role of surface and shallow subsurface flow linked to plant litter degradation and peat leaching. Environmental factors are ranked by their increasing effect on DOC, DIC, δ13CDIC, and major elements in western Siberian rivers as the following: watershed area −2 yr−1 until 61° N, decreased two-fold in the discontinuous permafrost zone (62–66° N, and increased again to 3 t km−2 yr−1 in the continuous permafrost zone (67° N. The DIC, Mg, K and Ca followed this pattern. The total dissolved cation flux (TDS_c ranged from 1.5 to 5.5 t km−2 yr−1, similar to that in central Siberian rivers of the continuous permafrost region. While Si concentration was almost unaffected by the latitude over all seasons, the Si flux systematically

  19. Finite Element Analysis of Composite Deck Slab Using Perfobond Rib as Shear Connection System under Vertical Loading

    Directory of Open Access Journals (Sweden)

    Omid Monshi Toussi

    2016-01-01

    Full Text Available Nowadays, the composite decks are very common to use in composite or steel construction. In this case of study the composite slabs have been investigated numerically by Finite Element Method (FEM. Five composite slabs were analyzed using finite element software LUSAS. The deflection of each model were obtained and compared with experimental test. Results showed a good agreement with the experimental data and indicate that the perfobond rib is appropriate shear connector for the bridges decks.

  20. Transient response of isotropic, orthotropic and anisotropic composite-sandwich shells with the superparametric element

    Science.gov (United States)

    Mallikarjuna; Kant, T.; Fafard, M.

    1992-09-01

    The first-order Reissner-Mindlin shear deformation theory is employed to investigate the transient response of isotropic, layered orthotropic and anisotropic composite and sandwich shells. The eight-noded Serendipity and nine-noded Lagrangian quadrilateral superparametric shell elements are used. Numerical convergence and stability of the elements are established using an explicit central difference technique with a special mass matrix diagonalization scheme. The effects of transverse shear modulii of stiff layers, length/thickness and radius/length ratios, time step, finite element mesh, orientation of fibers and degree of orthotropy on the transient response of shells are studied. The variety of results presented here, based on realistic material properties of more commonly used advanced laminated composite shells, should serve as references for future investigations.

  1. Detection of Elemental Composition of Lubricating Grease Using Laser Induced Breakdown Spectroscopy

    Directory of Open Access Journals (Sweden)

    Cherry Dhiman

    2014-12-01

    Full Text Available The elemental composition of lubricating soft grease used in rail engines are studied using laser induced breakdown spectroscopy (LIBS technique. LIBS spectra of fresh, partially used and fully used grease samples are recorded using time-gated ICCD spectrometer for verification of compositional degradation of the used grease. LIBS spectra of grease samples are analyzed by comparing with emission spectra of elements published by NIST standard database. Many spectral lines of impurity elements like Fe, Cu, Ba, Mg, Mn, Ni, S, Zn, Si, Pb, Ti, Ca and Al present in the grease in ppm or ppb level in trace level concentrations are observed in excess in the used grease mainly due to wear and tear. On the other hand in fresh grease, spectral lines of Ca, Al and Na are observed predominantly.

  2. Elemental stoichiometry and compositions of weevil larvae and two acorn hosts under natural phosphorus variation.

    Science.gov (United States)

    Ji, Huawei; Du, Baoming; Liu, Chunjiang

    2017-04-05

    To understand how different trophic organisms in a parasite food chain adapt to the differences in soil nutrient conditions, we investigated stoichiometric variation and homeostasis of multiple elements in two acorn trees, Quercus variabilis and Quercus acutissima, and their parasite weevil larvae (Curculio davidi Fairmaire) at phosphorus (P)-deficient and P-rich sites in subtropical China where P-rich ores are scattered among dominant P-deficient soils. Results showed that elemental stoichiometry and compositions of both acorns and weevil larvae differed significantly between P-deficient and P-rich sites (p stoichiometry and compositions (p stoichiometry and composition and physiological regulations of nutritional needs in organisms and provide possible stoichiometric responses of both plants and animals to P loading, a worldwide issue from excess release of P into the environment.

  3. The Use of Sprint Interface Element Delamination Simulation of Sandwich Composite Beam

    Science.gov (United States)

    Xu, Geng; Yan, Renjun

    2016-12-01

    Sandwich composite beams have been more and more used in various industries because of their excellent mechanical properties. However, the mismatched performance between face sheet and foam core always lead to such as cracks and damages in the core or face/core interface during the processes of manufacturing or service. Delamination damage at the adhesive interface is the most dangerous and could be one main source that the mechanical capability of the structure is serous degenerated. In this paper, a simple and natural model to evaluate the stiffness of the spring interface elements, which is based on the physics and the geometry of the adhesive layers, is proposed. In order to validate the model, cantilever beam bending test were conducted for marine sandwich composite I-beam. A good comparison has been found between predictions and experimental results, and results indicate that the spring interface element can provide an efficient model for the delamination simulation of sandwich composite structures.

  4. Finite-Element Analysis of Jute- and Coir-Fiber-Reinforced Hybrid Composite Multipanel Plates

    Science.gov (United States)

    Nirbhay, M.; Misra, R. K.; Dixit, A.

    2015-09-01

    Natural-fiber-reinforced polymer composite materials are rapidly gaining interest worldwide both in terms of research and industrial applications. The present work includes the characterization and modeling of jute- and coir-fiber-reinforced hybrid composite materials. The mechanical behavior of a two-panel plate and a sixpanel box structure is analyzed under various loading regimes by using the finite-element software ABAQUS®. Exhaustive parametric studies are also performed to obtain a clear insight into the relationships between various parameters and deflections of the panels and stress distributions in them. Deflections of both the structures are compared and found to be in good agreement with published results. To determine the mechanical behavior of natural-fiber-reinforced composite panels, a finite-element analysis is performed.

  5. Finite Element Modeling of Thermal Cycling Induced Microcracking in Carbon/Epoxy Triaxial Braided Composites

    Science.gov (United States)

    Zhang, Chao; Binienda, Wieslaw K.; Morscher, Gregory; Martin, Richard E.

    2012-01-01

    The microcrack distribution and mass change in PR520/T700s and 3502/T700s carbon/epoxy braided composites exposed to thermal cycling was evaluated experimentally. Acoustic emission was utilized to record the crack initiation and propagation under cyclic thermal loading between -55 C and 120 C. Transverse microcrack morphology was investigated using X-ray Computed Tomography. Different performance of two kinds of composites was discovered and analyzed. Based on the observations of microcrack formation, a meso-mechanical finite element model was developed to obtain the resultant mechanical properties. The simulation results exhibited a decrease in strength and stiffness with increasing crack density. Strength and stiffness reduction versus crack densities in different orientations were compared. The changes of global mechanical behavior in both axial and transverse loading conditions were studied. Keywords: Thermal cycles; Microcrack; Finite Element Model; Braided Composite

  6. Constitutive Behavior and Finite Element Analysis of FRP Composite and Concrete Members

    Directory of Open Access Journals (Sweden)

    Ki Yong Ann

    2013-09-01

    Full Text Available The present study concerns compressive and flexural constitutive models incorporated into an isoparametric beam finite element scheme for fiber reinforced polymer (FRP and concrete composites, using their multi-axial constitutive behavior. The constitutive behavior of concrete was treated in triaxial stress states as an orthotropic hypoelasticity-based formulation to determine the confinement effect of concrete from a three-dimensional failure surface in triaxial stress states. The constitutive behavior of the FRP composite was formulated from the two-dimensional classical lamination theory. To predict the flexural behavior of circular cross-section with FRP sheet and concrete composite, a layered discretization of cross-sections was incorporated into nonlinear isoparametric beam finite elements. The predicted constitutive behavior was validated by a comparison to available experimental results in the compressive and flexural beam loading test.

  7. The Compositions of Six Chinese Ordinary Chondrites and Element Distributions in Their Different Phases

    Institute of Scientific and Technical Information of China (English)

    陈永亨; ERNSTPERNICKA; 等

    1992-01-01

    Six Chinese ordinary chondrites (four of them have fallen in recent years and the trace element abundances have not yet been reported for the other two) were examined.The contents of 21 elements (Na,Cr,Mn,Sc,Se,Zn,Br,Ni,Fe,Co,Ir,Cu,Ga,As,Au,Sb,Os,W,Re,Pt,and Ru)in the magnetic fractions and 20 elements (Na,K,Ca,Sc,Cr,Mn,Fe,Co,Ni,Zn,Se,Br,La,Sm,Eu,Yb,Lu,Ir,Au,and As) in the non-magnetic fractions were de-termined by INAA. The results indicate that the 5 H-group chondrites show almost no difference in composition,but they are different from the Zhaodong L-group chondrite in elemental abundance.As a normalized element(relative to CI),the concentrations of Ga in the magnetic fractions can be used to classify ordinary chondrites(H-,L- and LL-group).The bulk composition and modal weight of each component calculated from element concentrations in different phases are in good agreement with the bulk rock analyses presented in the literature.

  8. Magnetic susceptibility and element composition mangrove sediments in Malang, East Java

    Science.gov (United States)

    Azzahro, Rosyida; Zulaikah, Siti; Diantoro, Markus; Budi, Pranitha Septiana

    2017-07-01

    Mangrove sediment has a unique environmental absorption characteristics, as it has two sources of sediment which are from allocthonous sediment and authochtonous sediment. In this research, the mangrove sediment samples are taken from Clungup Mangrove Conservation in Malang, East Java, Indonesia. The samples are taken from four spots around the mouth of the river, and four spots around mangrove conservation. Those samples are analyzed based on the magnetic characteristics and the element composition to reveal the magnetic properties and element composition so in the future they can be used as indicators to trace the source of magnetic minerals that are precipitated in the mangrove ecosystem. The magnetic susceptibility value based on mass for mangrove sediment around the river area h as the range of (38,8-2130)×10-8m3kg-1, while for the conservation area has the range of (0,97-122,5)×10-8m3kg-1. Based on XRF analysis, the mangrove sediment both from the river area and mangrove conservation area has a non-metallic element S, Br, metallic element Ca, Si, Al, K, Ti, Sr, and heavy metallic element Fe, Ni, Cu, Cr, Zn, Zr, Mn, and V, with the highest concentration of Fe element followed by Ca, Al, Si, and Ti.

  9. Finite Element Studies on Free Vibration of Laminated Composite Cylindrical Skew Panels

    Directory of Open Access Journals (Sweden)

    Srinivasa Chikkol Venkateshappa

    2014-01-01

    Full Text Available This paper presents the finite element studies made on free vibration of isotropic and laminated composite cylindrical skew panels. A finite element analysis is performed using CQUAD4 and CQUAD8 elements of MSC/NASTRAN software. The effects of the panel angle, skew angle, aspect ratio, and length-to-thickness-ratio on fundamental natural frequency of vibration of isotropic cylindrical skew panels are studied. The effects of additional parameters such as fiber orientation angle, numbers of layers (keeping total thickness constant, and laminate stacking sequence on the fundamental frequency of vibration of antisymmetric composite laminates have also been studied. During validation and convergence study, it is found that the CQUAD8 element yields more accurate results than the CQUAD4 element. Hence the CQUAD8 element has been employed for the remaining part of the investigation. The fundamental frequency is found to increase with the panel angle and skew angle. The variation of the fundamental frequency with the number of layers is not appreciable when the number of layers is greater than about 6. It is also seen that the boundary conditions have significant influence on the fundamental frequency.

  10. Multi-element composition of soils of seasonal wetlands across North Dakota, USA.

    Science.gov (United States)

    Yellick, A H; Jacob, D L; DeKeyser, E S; Hargiss, C L M; Meyers, L M; Ell, M; Kissoon-Charles, L T; Otte, M L

    2016-01-01

    The main goal of this study was to assess if the soils of wetlands of different condition varied in terms of element composition. The rationale was that compared to wetlands of good condition, wetlands of poor condition-which in the region have typically been disturbed by agricultural activities, are lower in biodiversity and have fewer native species-would have been altered in their physical and chemical soil characteristics. This in turn would have altered the element composition of the soils. The concentrations of about 50 elements in the topsoil of 43 seasonal wetlands of varying condition, as measured by plant community based assessments, across North Dakota were determined. Organic matter content of the soils increased as condition increased, and it was the most important variable explaining 40 % of variation in the concentrations of elements. This can be partly explained by binding of elements to organic matter (S, Se) and for most other elements (that bind mostly to the inorganic fraction) by displacement by organic matter. The biogeochemistry of S is further implicated in the distribution of Ca, most likely via formation of insoluble gypsum (calcium sulfate).

  11. Climate implications of major geochemical elements in the Holocene sediments of the North and East China monsoonal regions

    Institute of Scientific and Technical Information of China (English)

    Qianli SUN; Zhanghua WANG; Jing CHEN; Wu FENG

    2009-01-01

    Two Holocene sediment cores were retrieved respectively from the enclosed Lake Daihai in the monsoon/arid transition zone of North China and the Taihu Lake coast in the monsoonal area of the Yangtze delta, Eastern China. Distribution of major geochemical elements and their ratios were employed to reveal the characteristics of Holocene climate and associated envir-onmental implications in the two regions. It is suggested that the temporal distribution of major elements serve as a useful indicator to denote the variations of monsoon effective precipitation for the enclosed lake area. High values of resistant elements such as Al2O3, SiO2, TiO2, (FeO + Fe2O3), MnO in the lake sediments correspond to the depressed chemical weathering and weakened mon-soon effective precipitation, while the highs of mobile and easy soluble elements such as MgO, CaO, Na2O reflect the enhanced chemical weathering and increased monsoon effective precipitation in the lake basin. In comparison, the behaviors of the major elements in sediments of the Taihu Lake coast were largely controlled by the changes both in sea transgression in the different Holocene time periods and the monsoon precipitation. The relatively highs of Al2O3, TiO2, (FeO + Fe2O3), in marine-influenced sedi-ments suggest relatively strong coastal hydrodynamics and chemical weathering, and vice versa. Meanwhile, the lows of SiO2, Na2O and CaO in the non-marine-influenced sediments also denote relatively strong hydrodynamics and chemical weathering due to enhanced monsoon precipita-tion, and vice versa. Sedimentary environment should be taken into account when achieving a full understanding of their climate implications.

  12. Moisture effect on thermal conductivity of some major elements of a typical Libyan house envelope

    Science.gov (United States)

    Suleiman, Bashir M.

    2006-02-01

    The thermal conductivity and the assessment of moisture effect on building materials are essential for the calculation of the thermal loads on houses. Building materials such as simple units e.g. bricks, tiles, cement plasters, mortar and ground soils are investigated in this work. In the eastern coastal province of Libya, old buildings have thick walls (more than 50 cm thick made of mixed clay and stones) and consequently have good capacitive insulation. On the other hand, the relatively new houses have thin walls and need the addition of insulating materials. Unfortunately, these new houses were constructed without having enough technical data on the thermal properties of building materials and thermal loads were not considered. This leads to uncomfortable living conditions during hot and humid summers and cold and wet winters. This article reports the thermal conductivity values of three types of locally produced building materials used in the construction of a typical Libyan house envelope and gives suggestions to improve the thermal performance of such envelopes. The transient plane source technique (TPS) is used to measure the thermal conductivity of these materials at an average room temperature of 25 °C. The TPS technique uses a resistive heater pattern (TPS element) that is cut from a thin sheet of metal and covered on both sides with thin layers of an insulating material. The TPS element/sensor is used both as a heat source and as a temperature sensor. This technique has the dual advantage of short measuring time and low temperature rise (around 1 K) across the sample. This will prevent a non-uniform moisture distribution that may arise when the temperature difference across the wet samples is maintained for a long time. In addition, the flat thin shape of the TPS element substantially reduces the contact resistance between the sample and the sensor. More details about the TPS technique are included.

  13. MAXIMAL ELEMENTS OF A FAMILY OF GB-MAJORIZED MAPPINGS IN PRODUCT FC-SPACES AND APPLICATIONS

    Institute of Scientific and Technical Information of China (English)

    DING Xie-ping

    2006-01-01

    A new family of GB-majorized mappings from a topological space into a finite continuous topological spaces (in short, FC-space) involving a better admissible set-valued mapping is introduced. Some existence theorems of maximal elements for the family of GB-majorized mappings are proved under noncompact setting of product FCspaces. Some applications to fixed point and system of minimax inequalities are given in product FC-spaces. These theorems improve, unify and generalize many important results in recent literature.

  14. Coupled anthropogenic anomalies of radionuclides and major elements in estuarine sediments

    Energy Technology Data Exchange (ETDEWEB)

    Machado, W. [Departamento de Geoquimica, Universidade Federal Fluminense, Niteroi, RJ 24020-150 (Brazil)], E-mail: wmachado@geoq.uff.br; Luiz-Silva, W. [Instituto de Geociencias, Universidade Estadual de Campinas, Campinas, SP 13083-970 (Brazil); Sanders, C.J.; Patchineelam, S.R. [Departamento de Geoquimica, Universidade Federal Fluminense, Niteroi, RJ 24020-150 (Brazil)

    2008-08-15

    Concentrations of fertilizer industry-derived P (up to 3.4%), Ca (up to 6.1%), {sup 226}Ra (up to 744 Bq kg{sup -1}) and {sup 210}Pb (up to 1317 Bq kg{sup -1}) at least one order of magnitude above natural levels were recorded in a sediment core from Morrao River estuary (SE Brazil). Unsupported {sup 210}Pb (=total {sup 210}Pb - {sup 226}Ra) activities unexplained by atmospheric fallout and deviations from the radionuclides secular equilibrium also indicated strong anomalies. Anomalous constituents were positively correlated with each other and negatively correlated with clay mineral-bearing elements. These negative correlations were explained by a depletion of natural sediment constituents due to a dilution caused by elevated inputs of steel industry-derived elements (mainly by Fe levels up to 24%). Absolute data and normalizations by a proxy for clays (Al) and anthropogenic Fe evidenced variabilities in the quality of coastal and land-derived sediment inputs, mainly due to changes in the relative contributions from industrial sources.

  15. Recovering the Elemental Composition of Comet Wild 2 Dust in Five Stardust Impact Tracks and Terminal Particles in Aerogel

    Energy Technology Data Exchange (ETDEWEB)

    Ishii, H A; Brennan, S; Bradley, J P; Luening, K; Ignatyev, K; Pianetta, P

    2007-01-04

    The elemental (non-volatile) composition of five Stardust impact tracks and terminal particles left from capture of Comet 81P/Wild 2 dust were mapped in a synchrotron x-ray scanning microprobe with full fluorescence spectra at each pixel. Because aerogel includes background levels of several elements of interest, we employ a novel 'dual threshold' approach to discriminate against background contaminants: an upper threshold, above which a spectrum contains cometary material plus aerogel and a lower threshold below which it contains only aerogel. The difference between normalized cometary-plus-background and background-only spectra is attributable to cometary material. The few spectra in between are discarded since misallocation is detrimental: cometary material incorrectly placed in the background spectrum is later subtracted from the cometary spectrum, doubling the loss of reportable cometary material. This approach improves precision of composition quantification. We present the refined whole impact track and terminal particle elemental abundances for the five impact tracks. One track shows mass increases in Cr and Mn (1.4x), Cu, As and K (2x), Zn (4x) and total mass (13%) by dual thresholds compared to a single threshold. Major elements Fe and Ni are not significantly affected. The additional Cr arises from cometary material containing little Fe. We exclude Au intermixed with cometary material because it is found to be a localized surface contaminant carried by comet dust into an impact track. The dual threshold technique can be used in other situations where elements of interest in a small sample embedded in a matrix are also present in the matrix itself.

  16. Variations of the composition of the leaf cuticular wax among Chinese populations of Plantago major.

    Science.gov (United States)

    Guo, Yanjun; He, Yuji; Guo, Na; Gao, Jianhua; Ni, Yu

    2015-04-01

    Plantago major L. grows in a very wide range of regions in China and exhibits great variations among populations. The analysis of the cuticular-wax composition provides a potential approach to classify populations of P. major confronting different environmental conditions. Twelve populations of P. major and five populations of P. depressa Willd., distributed over regions with average annual temperatures ranging from -2.0 to 18.4°, were sampled, the variation of the composition of their cuticular waxes was analyzed, and their values of average chain length (ACL) and carbon preference index (CPI) were calculated. Great intra- and interspecies variations were observed for the total wax contents. The average annual temperature of the habitats was significantly correlated with the relative contents of the dominant n-alkanes with an odd number of C-atoms, but not with the wax contents. With an increasing average annual temperature, the relative contents of n-alkanes C29 and C31 decreased, whereas those of C33 and C35 as well as the values of ACLtotal and ACL27-33 increased. Cluster analysis based on the pattern of the n-alkane distribution allowed to clearly separate the populations of P. major according to the average annual temperature of their habitats, but not to separate the populations of the two species. Hence, the pattern of the n-alkane distribution might be a good taxonomic marker for P. major at the intraspecies level, but not at the interspecies level. Nevertheless, a small difference between the populations of the two species was observed concerning the values of ACLtotal and CPItotal , implying the potential use of these indices for the classification of the populations of the two species at the interspecies level.

  17. Depletions of Elements from the Gas Phase: A Guide on Dust Compositions

    CERN Document Server

    Jenkins, Edward B

    2014-01-01

    Ultraviolet spectra of stars recorded by orbiting observatories since the 1970's have revealed absorption features produced by atoms in their favored ionization stages in the neutral ISM of our Galaxy. Most elements show abundances relative to hydrogen that are below their values in stars, indicating their removal by condensation into solid form. The relative amounts of these depletions vary from one location to the next, and different elements show varying degrees of depletion. In a study of abundances along 243 different sight lines reported in more than 100 papers, Jenkins (2009) characterized the systematic patterns for the depletions of 17 different elements, and these results in turn were used to help us understand the compositions of dust grains. Since the conclusions are based on differential depletions along different sightlines, they are insensitive to errors in the adopted values for the total element abundances. Some of the more remarkable conclusions to emerge from this study are that (1) oxygen ...

  18. Finite element implementation and numerical issues of strain gradient plasticity with application to metal matrix composites

    DEFF Research Database (Denmark)

    Frederiksson, Per; Gudmundson, Peter; Mikkelsen, Lars Pilgaard

    2009-01-01

    A framework of finite element equations for strain gradient plasticity is presented. The theoretical framework requires plastic strain degrees of freedom in addition to displacements and a plane strain version is implemented into a commercial finite element code. A couple of different elements...... of quadrilateral type are examined and a few numerical issues are addressed related to these elements as well as to strain gradient plasticity theories in general. Numerical results are presented for an idealized cell model of a metal matrix composite under shear loading. It is shown that strengthening due...... to fiber size is captured but strengthening due to fiber shape is not. A few modelling aspects of this problem are discussed as well. An analytic solution is also presented which illustrates similarities to other theories....

  19. COMPOSITE ELEMENT METHOD FOR SEEPAGE ANALYSIS OF GEOTECHNICAL STRUCTURES WITH DRAINAGE HOLE ARRAY

    Institute of Scientific and Technical Information of China (English)

    CHEN Sheng-hong; XU Qing; HU Jing

    2004-01-01

    Air element concept and Composite Element Method (CEM) were introduced in this paper firstly, and then an explicit drainage holes element model was developed. The main advantage of the new model is that it allows drainage holes to be located within soil elements. Therefore the mesh generation of complicated geotechnical structures with a large number of seepage drainage holes becomes relatively convenient and feasible. This will further facilitate the optimal design of seepage control system, and in this case the calculation mesh can be kept unchanged when the number, position and orientation of drainage holes are adjusted. The model was been implemented in software. A sluice foundation seepage control problem was studied, by which the validity and the robustness of the new model were verified.

  20. Mechanical property analysis of kenaf–glass fibre reinforced polymer composites using finite element analysis

    Indian Academy of Sciences (India)

    M Ramesh; S Nijanthan

    2016-02-01

    Nowadays, natural fibres are used as a reinforcing material in polymer composites, owing to severe environmental concerns. Among many different types of natural resources, kenaf plants have been extensively exploited over the past few years. In this experimental study, partially eco-friendly hybrid composites were fabricated by using kenaf and glass fibres with two different fibre orientations of 0° and 90°. The mechanical properties such as tensile, flexural and impact strengths of these composites have been evaluated. From the experiment, it was observed that the composites with the 0° fibre orientation can withstand the maximum tensile strength of 49.27 MPa, flexural strength of 164.35 MPa, and impact strength of 6 J. Whereas, the composites with the 90° fibre orientation hold the maximum tensile strength of 69.86 MPa, flexural strength of 162.566 MPa and impact strength of 6.66 J. The finite element analysis was carried out to analyse the elastic behaviour of the composites and to predict the mechanical properties by using NX Nastran 9.0 software. The experimental results were compared with the predicted values and a high correlation between the results was observed. The morphology of the fractured surfaces of the composites was analysed using a scanning electron microscopy analysis. The results indicated that the properties were in the increasing trend and comparable with pure synthetic fibre reinforced composites, which shows the potential for hybridization of kenaf fibre with glass fibre.

  1. Serum biochemical study of major elements of captive Asiatic Lions Panthera leo persica

    Directory of Open Access Journals (Sweden)

    R.G. Jani

    2010-02-01

    Full Text Available The serum biochemistry of captive Asiatic Lions Panthera leo persica in India has not been studied in depths. We report here the results of an analysis of a large number of individuals with the aim of providing reference ranges for major serological parameters in male and female Asiatic lions in health and diseases. This information will be of use to zoo veterinarians and pathologists.

  2. Speciation of major and selected trace elements in IGCC fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Oriol Font; Xavier Querol; Frank E. Huggins; Jose M. Chimenos; Ana I. Fernandez; Silvia Burgos; Francisco Garcia Pena [Institute of Earth Sciences ' Jaume Almera' , Barcelona (Spain)

    2005-08-01

    The speciation of Ga, Ge, Ni, V, S and Fe in fly ash from IGCC power plant were investigated for possible further extraction process by combining conventional mineral and chemical analysis, leaching tests, wet sequential extraction, Moessbauer and XAFS spectroscopies. The results shown that Ge occurs mainly as water-soluble species, GeS and/or GeS{sub 2} and hexagonal GeO{sub 2}. Ga is present as an oxide, Ni occurs mainly as nickeline (NiAs), with minor proportions of Ni arsenates and vanadium as V(III) with minor amounts of V(IV) in the aluminosilicate glass matrix. Pyrrhotite and wurtzite-sphalerite are sulfide species containing Fe and Zn, but an important fraction of iron is also present in the aluminosilicate glass. These clear differences between the speciation of the above elements in this material and those reported for fly ash from conventional PC combustion. 15 refs., 8 figs., 5 tabs.

  3. Speciation of Major and Selected Trace Elements in IGCC Fly Ash

    Energy Technology Data Exchange (ETDEWEB)

    Font,O.; Querol, X.; Huggins, F.; Chimenos, J.; Fernandez, A.; Burgos, S.; Pena, F.

    2005-01-01

    The speciation of Ga, Ge, Ni, V, S and Fe in fly ash from IGCC power plant were investigated for possible further extraction process by combining conventional mineral and chemical analysis, leaching tests, wet sequential extraction, Moessbauer and XAFS spectroscopies. The results shown that Ge occurs mainly as water-soluble species, GeS and/or GeS2 and hexagonal GeO2. Ga is present as an oxide, Ni occurs mainly as nickeline (NiAs), with minor proportions of Ni arsenates and vanadium as V(III) with minor amounts of V(IV) in the aluminosilicate glass matrix. Pyrrhotite and wurtzite-sphalerite are sulfide species containing Fe and Zn, but an important fraction of iron is also present in the aluminosilicate glass. These clear differences between the speciation of the above elements in this material and those reported for fly ash from conventional PC combustion.

  4. Multi-Element Composition of Honey as a Suitable Tool for Its Authenticity Analysis

    Directory of Open Access Journals (Sweden)

    Oroian Mircea

    2015-06-01

    Full Text Available The aim of this study was to evaluate the composition of 36 honey samples of 4 different botanical origins (acacia, sun flower, tilia and honeydew from the North East region of Romania. An inductively coupled plasma-mass spectrometry (ICP-MS method was used to determine 27 elements in honey (Ag, Al, As, Ba, Be, Ca, Cd, Co, Cr, Cs, Cu, Fe, Ga, K, Li, Mg, Mn, Na, Ni, Pb, Rb, Se, Sr, Tl, U, V and Zn. We would like to achieve the following goal: to demonstrate that the qualitative and quantitative multi-element composition determination of honey can be used as a suitable tool to classify honey according to its botanical origin. The principal component analysis allowed the reduction of the 27 variables to 2 principal components which explained 74% of the total variance. The dominant elements which were strongly associated with the principal component were K, Mg and Ca. Discriminant models obtained for each kind of botanical honey confirmed that the differentiation of honeys according to their botanical origin was mainly based on multi-element composition. A correct classification of all samples was achieved with the exception of 11.1% of honeydew honeys.

  5. Humic substances elemental composition of selected taiga and tundra soils from Russian European North-East

    Directory of Open Access Journals (Sweden)

    Lodygin Evgeny

    2017-06-01

    Full Text Available Soils of Russian European North were investigated in terms of stability and quality of organic matter as well as in terms of soils organic matter elemental composi­tion. Therefore, soil humic acids (HAs, extracted from soils of different natural zones of Russian North-East were studied to characterize the degree of soil organic matter stabilization along a zonal gradient. HAs were extracted from soil of different zonal environments of the Komi Republic: south, middle and north taiga as well as south tundra. Data on elemental composition of humic acids and fulvic acids (FAs extracted from different soil types were obtained to assess humus formation mechanisms in the soils of taiga and tundra of the European North-East of Russia. The specificity of HAs elemental composition are discussed in relation to environmental conditions. The higher moisture degree of taiga soils results in the higher H/C ratio in humic substances. This reflects the reduced microbiologic activity in Albeluvisols sods and subsequent conser­vation of carbohydrate and amino acid fragments in HAs. HAs of tundra soils, shows the H/C values decreasing within the depth of the soils, which reflects increasing of aromatic compounds in HA structure of mineral soil horizons. FAs were more oxidized and contains less carbon while compared with the HAs. Humic acids, extracted from soil of different polar and boreal environments differ in terms of elemental composition winch reflects the climatic and hydrological regimes of humification.

  6. A major light rare-earth element (LREE) resource in the Khanneshin carbonatite complex, southern Afghanistan

    Science.gov (United States)

    Tucker, Robert D.; Belkin, Harvey E.; Schulz, Klaus J.; Peters, Stephen G.; Horton, Forrest; Buttleman, Kim; Scott, Emily R.

    2012-01-01

    The rapid rise in world demand for the rare-earth elements (REEs) has expanded the search for new REE resources. We document two types of light rare-earth element (LREE)-enriched rocks in the Khanneshin carbonatite complex of southern Afghanistan: type 1 concordant seams of khanneshite-(Ce), synchysite-(Ce), and parisite-(Ce) within banded barite-strontianite alvikite, and type 2 igneous dikes of coarse-grained carbonatite, enriched in fluorine or phosphorus, containing idiomorphic crystals of khanneshite-(Ce) or carbocernaite. Type 1 mineralized barite-strontianite alvikite averages 22.25 wt % BaO, 4.27 wt % SrO, and 3.25 wt % ∑ LREE2O3 (sum of La, Ce, Pr, and Nd oxides). Type 2 igneous dikes average 14.51 wt % BaO, 5.96 wt % SrO, and 3.77 wt % ∑ LREE2O3. A magmatic origin is clearly indicated for the type 2 LREE-enriched dikes, and type 1 LREE mineralization probably formed in the presence of LREE-rich hydrothermal fluid. Both types of LREE mineralization may be penecontemporaneous, having formed in a carbonate-rich magma in the marginal zone of the central vent, highly charged with volatile constituents (i.e., CO2, F, P2O5), and strongly enriched in Ba, Sr, and the LREE. Based on several assumptions, and employing simple geometry for the zone of LREE enrichment, we estimate that at least 1.29 Mt (million metric tonnes) of LREE2O3 is present in this part of the Khanneshin carbonatite complex.

  7. Biogeochemical interactions control a temporal succession in the elemental composition of marine communities

    KAUST Repository

    Martiny, Adam C.

    2015-11-23

    Recent studies have revealed clear regional differences in the particulate organic matter composition and stoichiometry of plankton communities. In contrast, less is known about potential mechanisms and patterns of temporal changes in the elemental composition of marine systems. Here, we monitored weekly changes in environmental conditions, phytoplankton abundances, and particulate organic carbon, nitrogen, and phosphorus concentrations over a 3-yr period. We found that variation in the particulate organic matter (POM) concentrations and ratios were related to seasonal oscillations of environmental conditions and phytoplankton abundances. Periods with low temperature, high nutrient concentrations and a dominance of large phytoplankton corresponded to low C : N : P and vice-versa for warmer periods during the summer and fall. In addition to seasonal changes, we observed a multiyear increase in POM C : P and N : P that might be associated with the Pacific Decadal Oscillation. Finally, there was substantial short-term variability in all factors but similar linkages between environmental variability and elemental composition as observed on seasonal and interannual time-scales. Using a feed-forward neural network, we could explain a large part of the variation in POM concentrations and ratios based on changes in environmental conditions and phytoplankton abundances. The apparent links across all time-scales between changes in physics, chemistry, phytoplankton, and POM concentrations and ratios suggest we have identified key controls of the elemental composition of marine communities in this region.

  8. Cellular peptide composition governed by major histocompatibility complex class I molecules.

    Science.gov (United States)

    Falk, K; Rötzschke, O; Rammensee, H G

    1990-11-15

    Major histocompatibility complex (MHC) class I molecules present peptides derived from cellular proteins to cytotoxic T lymphocytes (CTLs), which check these peptides for abnormal features. How such peptides arise in the cell is not known. Here we show that the MHC molecules themselves are substantially involved in determining which peptides occur intracellularly: normal mouse spleen cells identical at all genes but MHC class I express different patterns of peptides derived from cellular non-MHC proteins. We suggest several models to explain this influence of MHC class I molecules on cellular peptide composition.

  9. Layerwise mechanics and finite element for the dynamic analysis of piezoelectric composite plates

    Science.gov (United States)

    Saravanos, Dimitris A.; Heyliger, Paul R.; Hopkins, Dale A.

    1996-01-01

    Laminate and structural mechanics for the analysis of laminated composite plate structures with piezoelectric actuators and sensors are presented. The theories implement layerwise representations of displacements and electric potential, and can model both the global and local electromechanical response of smart composite laminates. Finite-element formulations are developed for the quasi-static and dynamic analysis of smart composite structures containing piezoelectric layers. Comparisons with an exact solution illustrate the accuracy, robustness and capability of the developed mechanics to capture the global and local response of thin and/or thick laminated piezoelectric plates. Additional correlations and numerical applications demonstrate the unique capabilities of the mechanics in analyzing the static and free-vibration response of composite plates with distributed piezoelectric actuators and sensors.

  10. Coupled mixed-field laminate theory and finite element for smart piezoelectric composite shell structures

    Science.gov (United States)

    Saravanos, Dimitris A.

    1996-01-01

    Mechanics for the analysis of laminated composite shells with piezoelectric actuators and sensors are presented. A new mixed-field laminate theory for piezoelectric shells is formulated in curvilinear coordinates which combines single-layer assumptions for the displacements and a layerwise representation for the electric potential. The resultant coupled governing equations for curvilinear piezoelectric laminates are described. Structural mechanics are subsequently developed and an 8-node finite-element is formulated for the static and dynamic analysis of adaptive composite structures of general laminations containing piezoelectric layers. Evaluations of the method and comparisons with reported results are presented for laminated piezoelectric-composite plates, a closed cylindrical shell with a continuous piezoceramic layer and a laminated composite semi-circular cantilever shell with discrete cylindrical piezoelectric actuators and/or sensors.

  11. Major and trace elements documented paleoenvironmental and provenance signatures as inferred from the lacustrine sequence of Orog Nuur, southern Mongolia

    Science.gov (United States)

    Yu, Kaifeng; Lehmkuhl, Frank; Diekmann, Bernhard; Nottebaum, Veit; Stauch, Georg

    2016-04-01

    In arid realm, due to scarce of continuous terrestrial archives, lacustrine sequences were more often employed as the paleoenvironmental repository. However, there exist numerous spatial and temporal heterogeneities concerning existing studied sites. In the Gobi Desert of southern Mongolia, only two records i.e., Bayan Tohomin Nuur and Ulaan Nuur, were previously reported, neither of them, however, provided records older than ~15 ka. A record that spans longer time period is therefore indispensable to better understand the thermal and hydrologic pattern and their driving mechanisms. Among the suite of the multidisciplinary studies on lacustrine archive, geochemistry appears most likely the promising tool to decipher the interplay between the environmental change, source lithotype and sediment bulk-composition. Considering the late Quaternary lacustrine sediments, the bulk-geochemistry may be controlled by source terranes, authigenic or allothigenic input, which can be altered by the past environment conditions. Knowledge of the bulk-geochemistry downcore variance along with the field investigation and carefully examined geologic mapping will thereby allow us to gain a better understanding of the climate-induced provenance changes throughout the deposition process. On the other hand, surveys considering the bulk-geochemistry and corresponding environmental interpretations in the pelagic realm have been systematically conducted and reviewed, while their counterpart explanations in the lacustrine sediments still need more investigations. Two parallel cores (ONW I, 6.00 m; ONW II, 13.36 m) was retrieved from Orog Nuur, Gobi Desert of southern Mongolia. A suite of high resolution element abundances were examined based on core ONW II in an attempt to gain a better understanding of the paleoenvironment and provenance history of the catchment system over the last ~50 ka. Due to the predominant clay or silty-clay fractions in the lacustrine sediments, Al and Si display

  12. Variation in elemental composition of human teeth and its application for feasible species identification.

    Science.gov (United States)

    Nganvongpanit, Korakot; Buddhachat, Kittisak; Piboon, Promporn; Euppayo, Thippaporn; Mahakkanukrauh, Pasuk

    2017-02-01

    Identifying human remains is a primary task in forensic science. In this study, we propose a possible new technique, handheld X-ray fluorescence (HHXRF), for determining whether a suspected tooth is an authentic human tooth. A total of 444 teeth obtained from 111 human skulls (male=62, female=49) aged between 30-67 years (51.81±8.37 years) were used as subjects. The teeth were scanned by HHXRF to acquire their elemental profile. Differences in elemental composition were analyzed for different tooth positions (numbers 1-32), between crown and root, and between sexes (male and female); also, the proportion of elements in relation to different human ages was examined. Teeth from 20 different animal species, serving as non-human teeth samples, were used to distinguish between human and non-human teeth through a stepwise discriminant analysis. Our results revealed that different tooth positions, different regions (crown and root) of a tooth, and different sexes demonstrated disparities in the proportion of several elements. The accuracy rate of predicting sex based on the elemental profile of human teeth was 65.5%. Likewise, a dissimilar distribution of elements between human and non-human teeth was observed, leading to a high degree of correctness of 83.2% for distinguishing them. In conclusion, elemental analysis by HHXRF could serve as a promising candidate tool for identifying human teeth in forensic science, but is ineffective for sex determination.

  13. Trace Elements Composition of Achatina achatina Samples from the Madina Market in Accra, Ghana

    Directory of Open Access Journals (Sweden)

    A.K. Anim

    2011-08-01

    Full Text Available This research was carried out to assess the composition and sources of trace elements in seventeen Achatina achatina samples obtained from the Madina Market. The trace elements were analyzed using Atomic Absorption Spectrophotometer (VARIAN AA 240 FS and Instrumental Neutron Activation Analysis (INAA. The highest mean Concentration, 2240.5 mg/kg was measured for chlorine while the least mean concentration, 0.13 mg/kg was measured for Magnessium. The mean elemental Concentrations were in the order Cl>Ca>Na>Al>Fe>Cu>Zn>Ni>Mn>K>V>Mg. Pearson Correlation matrix, Principal Component(PC Analysis and Hierarchical Cluster Analysis (CA shows varying sources of the trace elements, however there is great interrelationships regarding their sources. The correlation matrix at 99% confidence level loaded the components Al-Fe-Mn, Ca-Cl-Mg, Cl-Mg-Na, Fe-V, and Ni-V. PC1 which loaded Ca, Cl, Mg, Na, Ni, and V agrees very well with CA1. A similar trend is shown in CA2 and PC2 with Al, Fe and Mn loadings. The geology of the original habitat of the samples which is characterized by Shales, Quartzite and Feldsphalthic sandstone together with anthropogenic inputs from fertilizers, pesticides, and herbicides have been identified as the possible sources of the elements. All the elements analysed in the samples were essential elements.

  14. Comparative studies of elemental composition in leaves and flowers of Catharanthus roseus growing in Bangladesh

    Institute of Scientific and Technical Information of China (English)

    Shahin Aziz; Koushik Saha; Nasim Sultana; Husna Parvin Nur; Md.Aminul Ahsan; Shamim Ahmed; Md.Kamal Hossain

    2016-01-01

    Objective:To investigate the elemental composition of the leaves and flowers of Catharanthus roseus(C.roseus) due to the plant’s wide application in the indigenous medicinal system and its chemical constituents’ importance.Methods:The atomic absorption spectrophotometer was used for quantitative analysis of various elements.Results:Total 13 important elements were analyzed in leaves and flowers of C.roseus.Results indicated the presence of Na,K,Ca,Mg,Cr,Fe,Zn,Al,Cu,Ni,Pb,Cd and Mn in both leaves and flowers.The most important finding of the work was that,leaves of C.roseus showed high concentration of all elements except K and Zn while flowers of C.roseus showed higher concentration of K and Zn.Conclusions:The elemental composition in both leaves and flowers of C.roseus were found to be different.Therefore,different parts of this medicinal plant are enriched in some micro and macro nutrients like Fe,Ca,Na,K,Zn,which are very important for biological metabolic system as well as human health.

  15. Comparative studies of elemental composition in leaves and flowers of Catharanthus roseus growing in Bangladesh

    Institute of Scientific and Technical Information of China (English)

    Shahin Aziz; Koushik Saha; Nasim Sultana; Husna Parvin Nur; Md Aminul Ahsan; Shamim Ahmed; Md Kamal Hossain

    2016-01-01

    Objective: To investigate the elemental composition of the leaves and flowers of Catharanthus roseus (C. roseus) due to the plant's wide application in the indigenous medicinal system and its chemical constituents' importance. Methods: The atomic absorption spectrophotometer was used for quantitative analysis of various elements. Results: Total 13 important elements were analyzed in leaves and flowers of C. roseus. Results indicated the presence of Na, K, Ca, Mg, Cr, Fe, Zn, Al, Cu, Ni, Pb, Cd and Mn in both leaves and flowers. The most important finding of the work was that, leaves of C. roseus showed high concentration of all elements except K and Zn while flowers of C. roseus showed higher concentration of K and Zn. Conclusions: The elemental composition in both leaves and flowers of C. roseus were found to be different. Therefore, different parts of this medicinal plant are enriched in some micro and macro nutrients like Fe, Ca, Na, K, Zn, which are very important for biological metabolic system as well as human health.

  16. A study on temporal variation of elemental composition in tree barks used as air pollution indicators

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Eliane C.; Saiki, Mitiko, E-mail: eliane_csantos@yahoo.com.br, E-mail: mitiko@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    The study of air pollution using biological matrices has shown that tree barks may be used as biomonitor due to accumulation of aerosol particles on its porous surface. The bark elemental composition can provide information on pollution sources as well as characterize the aerial pollutants from a wide geographical region. The aim of this study was to investigate the variation in elemental composition in barks with time of exposure. Tree barks from Tipuana (Tipuana tipu) and Sibipiruna (Caesalpinia peltophoroides) species were collected in February 2013 and July 2014 in the city of São Paulo. For analysis, the barks were cleaned, grated, ground and analyzed by neutron activation analysis (NAA). Aliquots of samples and synthetic standards of elements were irradiated with thermal neutron flux at the IEA-R1 nuclear research reactor and after a suitable decay time, the induced gamma activities were analyzed by gamma spectrometry. The elements As, Br, Ca, Co, Cr, Cs, Fe, K, La, Rb, Sb, Sc and Zn were determined and the results indicated variability in the concentrations depending on the element, sampling period and also on tree species, indicating that there are not very well defined temporal trends. The quality control of the analytical results evaluated by analyzing INCT Virginia Tobacco Leaves certified reference material (CRM) presented values of |z-score| < 2, indicating that the procedure of NAA applied is suitable for the analyses. (author)

  17. Principles of Linguistic Composition Below and Beyond the Clause—Elements of a semantic combinatorial system

    DEFF Research Database (Denmark)

    Bundgaard, Peer

    2006-01-01

    The present investigation challenges the traditional distinction between cohesion and coherence; i.e., the distinction between the syntactical rules governing the composition of lexical units within the scope of the clause and the semantic-pragmatic rules guiding the composition of text units...... beyond the scope of the clause. To this end it exposes two major principles of semantic combination that are active through all levels of linguistic composition: viz. frame-schematic structure and narrative structure. These principles are considered as being components of a semantic combinatorial system...

  18. Finite Element Analysis of External Thermal Insulation Composite System: Thin Rendered Expanded Polystyrene Board

    Institute of Scientific and Technical Information of China (English)

    BO Hai-tao; LI Hui-qiang; YIN Xiu-qin

    2009-01-01

    The finite element model of an external thermal composite insulation system, thin rendered expanded polystyrene (EPS) board, was built with ANSYS 1.0, which had two forms: one with window and one without window. The finite element analysis results show that the EPS board had very good insulation capacity at both high or low temperature, stress concentration was produced in the center of wall and around window, and the maximum deformation was observed at the edge of board and the minimum deformation was in the center.

  19. Analysis of Composite Transverse Mechanical Properties Based on Micromechanical Finite Element Method

    Directory of Open Access Journals (Sweden)

    LIU Wan-lei

    2016-11-01

    Full Text Available Transverse fracture often occurs early in the loading history and is one of the key issues limiting the composite structural design. However, the mechanical behavior under transverse loading can not be represented by traditional micromechanical model which does not consider the influence of constituent properties, fiber volume fraction and fiber distribution. A new computational micromechanics finite element method, which the microstructure was idealized as a random dispersion of parallel fibers embedded in the polymeric matrix using improved random sequence absorption algorithm, was presented. The plasticity of matrix and interface decohesion of the composite were included in this model and the residual stress caused by the cooling of composite after the curing process was also taken into consideration. The transverse tension, compression and shear of composite were analyzed by the micromechanical finite element method. Compared with the experiment results, the prediction errors of transverse module were less than 7%, and the transverse compression strength and shear strength were less than 8%. The results demonstrate that the method proposed here can be used to predict the composite transverse behavior.

  20. Distribution of Major and Trace Elements in a Tropical Hydroelectric Reservoir in Sarawak, Malaysia

    Science.gov (United States)

    Nyanti, Lee; Ean Lee, Terri Zhuan; Mohd Irwan Lu, Nurul Aida Lu

    2014-01-01

    This paper reports the metals content in water, sediment, macroalgae, aquatic plant, and fish of Batang Ai Hydroelectric Reservoir in Sarawak, Malaysia. The samples were acid digested and subjected to atomic absorption spectrometry analysis for Na, K, Mn, Cr, Ni, Zn, Mg, Fe, Sn, Al, Ca, As, Se, and Hg. The total Hg content was analysed on the mercury analyser. Results showed that metals in water, sediment, macroalgae, aquatic plant, and fish are distinguishable, with sediment and biota samples more susceptible to metal accumulation. The distributions of heavy metals in water specifically Se, Sn, and As could have associated with the input of fish feed, boating, and construction activities. The accumulation of heavy metals in sediment, macroalgae, and aquatic plant on the other hand might be largely influenced by the redox conditions in the aquatic environment. According to the contamination factor and the geoaccumulation index, sediment in Batang Ai Reservoir possesses low risk of contamination. The average metal contents in sediment and river water are consistently lower than the literature values reported and well below the limit of various guidelines. For fishes, trace element Hg was detected; however, the concentration was below the permissible level suggested by the Food and Agriculture Organization. PMID:27437493

  1. Chemical composition and antiprotozoal activities of Colombian Lippia spp essential oils and their major components

    Directory of Open Access Journals (Sweden)

    Patricia Escobar

    2010-03-01

    Full Text Available The chemical composition and biological activities of 19 essential oils and seven of their major components were tested against free and intracellular forms of Leishmania chagasi and Trypanosoma cruzi parasites as well as Vero and THP-1 mammalian cell lines. The essential oils were obtained from different species of Lippia, a widely distributed genus of Colombian plants. They were extracted by microwave radiation-assisted hydro-distillation and characterised by GC-FID and GC-MS. The major components were geranial, neral, limonene, nerol, carvacrol, p-cymene, γ-terpinene, carvone and thymol. The essential oil of Lippia alba exhibited the highest activity against T. cruzi epimastigotes and intracellular amastigotes with an IC50 of 5.5 μg/mL and 12.2 μg/mL, respectively. The essential oil of Lippia origanoides had an IC50 of 4.4 μg/mL in L. chagasi promastigotes and exhibited no toxicity in mammalian cells. Thymol (IC50 3.2 ± 0.4 μg/mL and S-carvone (IC50 6.1 ± 2.2 μg/mL, two of the major components of the active essential oils, were active on intracellular amastigotes of T. cruziinfected Vero cells, with a selective index greater than 10. None of the essential oils or major components tested in this study was active on amastigotes of L. chagasi infected THP-1 cells.

  2. Chemical composition and antiprotozoal activities of Colombian Lippia spp essential oils and their major components.

    Science.gov (United States)

    Escobar, Patricia; Milena Leal, Sandra; Herrera, Laura Viviana; Martinez, Jairo Rene; Stashenko, Elena

    2010-03-01

    The chemical composition and biological activities of 19 essential oils and seven of their major components were tested against free and intracellular forms of Leishmania chagasi and Trypanosoma cruzi parasites as well as Vero and THP-1 mammalian cell lines. The essential oils were obtained from different species of Lippia, a widely distributed genus of Colombian plants. They were extracted by microwave radiation-assisted hydro-distillation and characterised by GC-FID and GC-MS. The major components were geranial, neral, limonene, nerol, carvacrol, p-cymene, gamma-terpinene, carvone and thymol. The essential oil of Lippia alba exhibited the highest activity against T. cruzi epimastigotes and intracellular amastigotes with an IC50 of 5.5 microg/mL and 12.2 microg/mL, respectively. The essential oil of Lippia origanoides had an IC50 of 4.4 microg/mL in L. chagasi promastigotes and exhibited no toxicity in mammalian cells. Thymol (IC50 3.2 +/- 0.4 microg/mL) and S-carvone (IC50 6.1 +/- 2.2 microg/mL), two of the major components of the active essential oils, were active on intracellular amastigotes of T. cruziinfected Vero cells, with a selective index greater than 10. None of the essential oils or major components tested in this study was active on amastigotes of L. chagasi infected THP-1 cells.

  3. Sustainable self-healing at ultra-low temperatures in structural composites incorporating hollow vessels and heating elements

    Science.gov (United States)

    Wang, Yongjing; Pham, Duc Truong; Zhang, Zhichun; Li, Jinjun; Ji, Chunqian; Liu, Yanju; Leng, Jinsong

    2016-09-01

    Self-healing composites are able to restore their properties automatically. Impressive healing efficiencies can be achieved when conditions are favourable. On the other hand, healing might not be possible under adverse circumstances such as very low ambient temperature. Here, we report a structural composite able to maintain its temperature to provide a sustainable self-healing capability-similar to that in the natural world where some animals keep a constant body temperature to allow enzymes to stay active. The composite embeds three-dimensional hollow vessels with the purpose of delivering and releasing healing agents, and a porous conductive element to provide heat internally to defrost and promote healing reactions. A healing efficiency over 100% at around -60°C was obtained. The effects of the sheets on the interlaminar and tensile properties have been investigated experimentally. The proposed technique can be implemented in a majority of extrinsic self-healing composites to enable automatic recovery at ultra-low temperatures.

  4. Ballistic impact behaviour of woven fabric composite: Finite element analysis and experiments

    Science.gov (United States)

    Phadnis, V. A.; Pandya, K. S.; Naik, N. K.; Roy, A.; Silberschmidt, V. V.

    2013-07-01

    A mechanical behaviour of plain-weave E-glass fabric/epoxy laminate composite plate exposed to ballistic impact is studied using a finite-element (FE) code Abaqus/Explicit. A ply-level FE model is developed, where a fabric-reinforced ply is modelled as a homogeneous orthotropic elastic material with potential to sustain progressive stiffness degradation due to fiber/matrix cracking, and plastic deformation under shear loading. The model is implemented as a VUMAT user subroutine. Ballistic experiments were carried out to validate the FE model. A parametric study for varying panel thickness is performed to compare impact resistance of the studied composite.

  5. Influence of rare earth element Y on composition, microstructure and inclusion of the weld

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In this paper, the influence of rare element Y on the composition, microstructure and inclusions of the weld metal has been studied by using the method of "alloy addition in a molten pool". The results show: (1) The composition of the weld metal is not obviously affected by little amount of Y-SiFe addition. (2) Y-SiFe can make weld microstructure fine and raise the hardness of the weld. (3) Y-SiFe has not obvious influence on the inclusion size. (4) When the amount of Y is a little, Y accumulates in the silicates of Ti, Mn and other compound inclusion with MnS.

  6. X-ray based micromechanical finite element modeling of composite materials

    DEFF Research Database (Denmark)

    Mikkelsen, Lars Pilgaard; Emerson, Monica Jane; Jespersen, Kristine Munk;

    2016-01-01

    This is a study of a uni-directional non-crimp fabric reinforced epoxy composite material typically used as the load carrying laminate in wind turbine blades. Based on a 3D xray tomography scan, the bundle and fibre/matrix structure of the composite is segmented. This segmentation is used in a mu...... in a multi-scale finite element model bridging the gap from the individual fibers organized in bundles to the stitched non-crimp fabric used for building up the load carrying laminates....

  7. Template polymerization synthesis of hydrogel and silica composite for sorption of some rare earth elements.

    Science.gov (United States)

    Borai, E H; Hamed, M G; El-kamash, A M; Siyam, T; El-Sayed, G O

    2015-10-15

    New sorbents containing 2-acrylamido 2-methyl propane sulphonic acid monomer onto poly(vinyl pyrilidone) P(VP-AMPS) hydrogel and P(VP-AMPS-SiO2) composite have been synthesized by radiation template polymerization. The effect of absorbed dose rate (kGy), crosslinker concentration and polymer/monomer ratio on the degree of template polymerization of P(VP-AMPS) hydrogel was studied. The degree of polymerization was evaluated by the calculated percent conversion and swelling degree. The maximum capacity of P(VP-AMPS) hydrogel toward Cu(+2) metal ion found to be 91 mg/gm. The polymeric composite P(VP-AMPS-SiO2) has been successfully synthesized. The structure of the prepared hydrogel and composite were confirmed by FTIR, thermal analysis (TGA and DTA) and SEM micrograph. Batch adsorption studies for La(3+), Ce(3+), Nd(3+), Eu(3+) and Pb(+2) metal ions on the prepared hydrogel and composite were investigated as a function of shaking time, pH and metal ion concentration. The sorption efficiency of the prepared hydrogel and composite toward light rare earth elements (LREEs) are arranged in the order La(3+)>Ce(3+)>Nd(3+)>Eu(3+). The obtained results demonstrated the superior adsorption capacity of the composite over the polymeric hydrogel. The maximum capacity of the polymeric composite was found to be 116, 103, 92, 76, 74 mg/gm for La(3+), Ce(3+), Nd(3+), Eu(3+) and Pb(2+) metal ions respectively.

  8. THE PAIPA VOLCANO, EASTERN CORDILLERA OF COLOMBIA, SOUTH AMERICA (PART II: PETROGRAPHY AND MAJOR ELEMENTS PETROLOGY

    Directory of Open Access Journals (Sweden)

    Cepeda Héctor

    2005-08-01

    Full Text Available Paipa volcano products are mainly pyroclastic pumice and ash flow tuffs, lava domes and pyroclastic block and ash flow tuffs. They are classified as alkaline rhyolites and trachytes and high-K calcalkaline rhyolites. Chemical data show SiO2 values between 68 and 72%, and alkalis (Na2O+K2O content of 7%-10%. Essential minerals are phenocrysts and glomerocrysts of anorthoclase, sanidine up to 1,5 cm and anorthoclase-mantled plagioclase; accessory minerals are red biotite, and hastingsite while trace minerals are augite, zircon, sphene and magnetite. Crystals have disequilibrium textures, such as dissolution embayments, corrosion and reabsortion borders, normal, inverse, oscillating and patchy zonation, together with fibrous borders intercalated with euhedral borders. In correlation with published data of Iza volcanic rocks, Paipa rocks chemical composition confirms that acid and alkaline magmas that have erupted in the Eastern Cordillera of Colombia during the Neogene are strongly different from the calc-alkaline magmas that erupt in the westward active arc (Central Cordillera. Detailed structural, geochemical and geophysical research has to be done in future research to establish the geodynamic framework that governs the volcanism of the Eastern Cordillera.

  9. Major and trace element whole rock and mineral chemistry of Southern Patagonian Mantle Xenoliths

    Science.gov (United States)

    Mundl, Andrea; Ntaflos, Theodoros; Bjerg, Ernesto; Hauzenberger, Christoph

    2013-04-01

    The Pali Aike Volcanic Field (PAVF) situated in the back-arc tectonic setting of southern Patagonia is one of the two Patagonian localities where garnet and spinel peridotites are brought to the surface by alkaline basalts. The other locality is Prahuaniyeu in northern Patagonia. The xenoliths from the PAVF were collected at Salsa, El Ruido and Potrok Aike mare and are spinel- and spinel-garnet-lherzolites, followed by spinel- and spinel-garnet harzburgites. Textures are protogranular to protogranular-equigranular with some samples slightly foliated. None of the studied xenoliths contain hydrous phases such as phlogopite and/or amphibole but few contain secondary interstitial clinopyroxenes and melt pockets. Inclusions of spinel in some garnets suggest transition from spinel to garnet peridotite stability field. Frequently, Opx show exsolution lamellae of Cpx (+/- Sp) and vice versa indicating subsolidus cooling. Occasionally, Cpx show spongy rims suggesting either decompression or reaction with infiltrating melt. Whole rock Al2O3 and CaO contents range from 0.63 to 3.54 wt% and 0.24 to 2.90 wt%, respectively. The variation diagrams of CaO and Al2O3 versus MgO exhibit a linear correlation that could be interpreted as residuals after extraction of melts with different degrees of partial melting from a common mantle source. Modeled fractional melting degrees for Salsa, El Ruido and Potrok Aike Sp-peridotites are 6.5 - 12%, 4 - 17% and 5.5 - 9%, respectively. Olivine compositions vary between Fo89.51 - Fo92.04. However, one El Ruido Sp-harzburgite and one Gt-harzburgite have lower Fo-contents (Fo88.88 -Fo89.11) indicating either a cumulate nature of the xenoliths or a change in chemical composition of the rocks due to reaction with infiltrating melts. Primary Cpx are Cr-diopsides with mean compositions En47-50Fs4-5Wo48-45 in lherzolites, En49-53Fs6-5Wo44-41 in harzburgites, and En47Fs3Wo50 in the El Ruido dunite. Cpx Al2O3 and Cr2O3 contents in all rock types vary

  10. Multivariate spatial analyses of the distribution and origin of trace and major elements in soils surrounding a secondary lead smelter.

    Science.gov (United States)

    Schneider, Arnaud R; Morvan, Xavier; Saby, Nicolas P A; Cancès, Benjamin; Ponthieu, Marie; Gommeaux, Maxime; Marin, Béatrice

    2016-08-01

    Major and trace elements in soils originate from natural processes and different anthropogenic activities which are difficult to discriminate. On a 17-ha impacted site in northern France, two industrial sources of soil contamination were xidentified: a former iron foundry and a current secondary lead smelter. To discriminate and map natural and anthropogenic sources of major and trace elements on this site, the rarely applied MULTISPATI-principal component analysis (PCA) method was used. Using a 20-m × 20-m grid, 247 topsoil horizons were sampled and analysed with a field-portable X-ray fluorescence analyser for screening soil contamination. The study site was heavily contaminated with Pb and, to a lesser degree, with Sn. Summary statistics and enrichment factors allowed the differentiation of the main lithogenic or anthropogenic origin of the elements. The MULTISPATI-PCA method, which explained 73.9 % of the variability with the three first factors, evidenced strong spatial structures. Those spatial structures were attributed to different natural and artificial processes in the study area. The first axis can be interpreted as a lithogenic effect. Axes 2 and 3 reflect the two different contamination sources. Pb, Sn and S originated from the secondary lead smelter while Fe and Ca were mainly derived from the old iron foundry activity and the old railway built with foundry sand. This study demonstrated that the MULTISPATI-PCA method can be successfully used to investigate multicontaminated sites to discriminate the various sources of contamination.

  11. Transposable elements are major contributors to the origin, diversification, and regulation of vertebrate long noncoding RNAs.

    Directory of Open Access Journals (Sweden)

    Aurélie Kapusta

    2013-04-01

    Full Text Available Advances in vertebrate genomics have uncovered thousands of loci encoding long noncoding RNAs (lncRNAs. While progress has been made in elucidating the regulatory functions of lncRNAs, little is known about their origins and evolution. Here we explore the contribution of transposable elements (TEs to the makeup and regulation of lncRNAs in human, mouse, and zebrafish. Surprisingly, TEs occur in more than two thirds of mature lncRNA transcripts and account for a substantial portion of total lncRNA sequence (~30% in human, whereas they seldom occur in protein-coding transcripts. While TEs contribute less to lncRNA exons than expected, several TE families are strongly enriched in lncRNAs. There is also substantial interspecific variation in the coverage and types of TEs embedded in lncRNAs, partially reflecting differences in the TE landscapes of the genomes surveyed. In human, TE sequences in lncRNAs evolve under greater evolutionary constraint than their non-TE sequences, than their intronic TEs, or than random DNA. Consistent with functional constraint, we found that TEs contribute signals essential for the biogenesis of many lncRNAs, including ~30,000 unique sites for transcription initiation, splicing, or polyadenylation in human. In addition, we identified ~35,000 TEs marked as open chromatin located within 10 kb upstream of lncRNA genes. The density of these marks in one cell type correlate with elevated expression of the downstream lncRNA in the same cell type, suggesting that these TEs contribute to cis-regulation. These global trends are recapitulated in several lncRNAs with established functions. Finally a subset of TEs embedded in lncRNAs are subject to RNA editing and predicted to form secondary structures likely important for function. In conclusion, TEs are nearly ubiquitous in lncRNAs and have played an important role in the lineage-specific diversification of vertebrate lncRNA repertoires.

  12. Research of essential elements composition in the cerebrospinal fluid in patients with outcomes of traumatic brain injury

    OpenAIRE

    Aliev, M. A.; MAMADALIEV A.M.; MAMADALIEVA S.A.

    2015-01-01

    The aim of this research is to investigate the essential elements composition in the cerebrospinal fluid of patients with different outcomes of traumatic brain injury before and after complex treatment with the use of endolumbal and intracystal introduction of ozone and pyracetam in dynamics. Essential elements composition was investigated in the cerebrospinal fluid of 83 patients. Thus, it may be noted positive changes in the metabolism of essential elements in the cerebrospinal fluid of pat...

  13. [The elemental composition of teeth hard tissues depending on the state of the environment].

    Science.gov (United States)

    Suladze, N; Shishniashvili, T; Margvelashvili, V; Kobakhidze, K

    2014-01-01

    At present, great attention is paid to the origin of man-made micro elemental anomalies. To monitor the state of the environment and its effects on the human body, of great importance is the determination of the amount and distribution of various chemical elements in the dentin and enamel of the teeth. To determine the essential (Ca, Zn, Mn, Ni), conditionally essential (Rb, Ni, Sr) and toxic (Pb, Hg) trace elements in the mineralized tissues of the teeth and to identify the relationship between the elemental composition of the tooth structure and the state of the general and dental health depending on the state of the environment, we have examined 29 children aged 3-4 years who have carried out analysis of hard tissue of teeth (teeth used for remote medical reasons) for the maintenance of nine chemical elements. Children living in a relatively environmentally favorable conditions essential value and conditionally essential elements in the mineralized tissues of the teeth were within normal limits, and toxic elements slightly increased limits that differ from those of children living in environmentally disadvantaged areas. In particular, these essential elements were significantly reduced (except for zinc), as indicators of toxic elements - mercury and lead, increased by 12.5% and 44.5%, respectively, which is clearly reflected on the state of dental health because noted decompensated form of tooth decay. Thus, deviations in a state of general and dental health of children associated with an imbalance of macro-and microelements in the mineralized tissues of the teeth.

  14. An element-based finite-volume method approach for naturally fractured compositional reservoir simulation

    Energy Technology Data Exchange (ETDEWEB)

    Marcondes, Francisco [Federal University of Ceara, Fortaleza (Brazil). Dept. of Metallurgical Engineering and Material Science], e-mail: marcondes@ufc.br; Varavei, Abdoljalil; Sepehrnoori, Kamy [The University of Texas at Austin (United States). Petroleum and Geosystems Engineering Dept.], e-mails: varavei@mail.utexas.edu, kamys@mail.utexas.edu

    2010-07-01

    An element-based finite-volume approach in conjunction with unstructured grids for naturally fractured compositional reservoir simulation is presented. In this approach, both the discrete fracture and the matrix mass balances are taken into account without any additional models to couple the matrix and discrete fractures. The mesh, for two dimensional domains, can be built of triangles, quadrilaterals, or a mix of these elements. However, due to the available mesh generator to handle both matrix and discrete fractures, only results using triangular elements will be presented. The discrete fractures are located along the edges of each element. To obtain the approximated matrix equation, each element is divided into three sub-elements and then the mass balance equations for each component are integrated along each interface of the sub-elements. The finite-volume conservation equations are assembled from the contribution of all the elements that share a vertex, creating a cell vertex approach. The discrete fracture equations are discretized only along the edges of each element and then summed up with the matrix equations in order to obtain a conservative equation for both matrix and discrete fractures. In order to mimic real field simulations, the capillary pressure is included in both matrix and discrete fracture media. In the implemented model, the saturation field in the matrix and discrete fractures can be different, but the potential of each phase in the matrix and discrete fracture interface needs to be the same. The results for several naturally fractured reservoirs are presented to demonstrate the applicability of the method. (author)

  15. From interstellar abundances to grain composition: the major dust constituents Mg, Si and Fe

    CERN Document Server

    Voshchinnikov, N V

    2010-01-01

    We analyse observational correlations for three elements entering into the composition of interstellar silicate and oxide grains. Using current solar abundances (Asplund et al. 2009), we convert the gas-phase abundances into dust-phase abundances for 196 sightlines. We deduce a sharp difference in abundances for sightlines located at low ($|b|30\\degr$) galactic latitudes. For high-latitude stars the ratios Mg/Si and Fe/Si in dust are close to 1.5. For disk stars they are reduced to ${\\rm Mg/Si} \\sim 1.2$ and ${\\rm Fe/Si} \\sim 1.05$. The derived numbers indicate that 1) the dust grains cannot be the mixture of silicates with olivine and pyroxene composition only and some amount of magnesium or iron (or both) should be in another population and 2) the destruction of Mg-rich grains in the warm medium is more effective than of Fe-rich grains. We reveal a decrease of dust-phase abundances and correspondingly an increase of gas-phase abundances with distance $D$ for stars with $D\\ga 400$\\,pc. We attribute this fact...

  16. GIS-based multielement source analysis of dustfall in Beijing: A study of 40 major and trace elements.

    Science.gov (United States)

    Luo, Nana; An, Li; Nara, Atsushi; Yan, Xing; Zhao, Wenji

    2016-06-01

    Dust, as an important carrier of inorganic and organic pollutants, daily exposes to human without any protection. It affects our health adversely, especially its chemical elements and ions. In this research, we investigated the chemical characteristics of dustfall in Beijing, specifically in terms of 40 major and trace elements, and presented semi-quantitative evaluations of the relative local and remote contributions. In total, 58 samples were collected in Beijing and nearby cities during 2013-2014 "the winter heating period". Using multiple statistical methods and GIS techniques, we obtained the relative similarities among certain elements and identified their pollution sources (from local or nearby cities). And more interestingly, the relative contributions of nearby cities can be calculated by the Hysplit4 backward-trajectory model. In addition, the correlation analysis for the 40 elements in dust and soil indicated that traffic restricted interchange between them; the city center, with the heaviest traffic, had the most significant influence. Finally, the resulting source apportionment was examined and modified using land use data and terrain information. We hope it can provide a strong basis for the environmental protection and risk assessment.

  17. The effect of lipid content on the elemental composition and energy capacity of yeast biomass.

    Science.gov (United States)

    Minkevich, Igor G; Dedyukhina, Emiliya G; Chistyakova, Tat'yana I

    2010-10-01

    Oleaginous yeasts (18 strains) were grown in ethanol media under various cultivation conditions (33 biomass samples). It was found that lipid and lipid-free fractions of dry biomass have elemental composition and biomass reductivity very close to values which can be considered as biological constants. The energy content of dry biomass strongly depended on the total lipid content. When the lipid content was 64%, the energy value of dry biomass reached 73% of diesel oil; therefore, oleaginous microorganisms can be a promising source of biodiesel fuel. The approach used in this work makes it possible to determine the energy value of biomass by its elemental composition without application of laborious and expensive calorimetric measurements of combustion heats.

  18. For a Few Howardites More: Grand Maps the Elemental Composition of Vesta

    Science.gov (United States)

    Prettman, T.; Reedy, R. C.; Mittlefehldt, David W.; Yamashita, N.; Lawrence, D. J.; Beck, A. W.; Feldman. W. C.; McCoy, T. J.; McSween, H. Y.; Toplis, M. J.; Forni, O.; Mizzon, H.; Raymond, C. A.; Russell, C. T.; Polanskey, C. A.; Joy, S. P.; Mafi, J.

    2012-01-01

    Dawn?s Gamma Ray and Neutron Detector (GRaND) successfully completed Low Altitude Mapping Orbit (LAMO) at Vesta. Over four months were spent acquiring data in a 460-km radius orbit around Vesta (265-km mean radius). In LAMO, strong signatures from Vesta were observed for gamma rays and neutrons. We present preliminary abundances, detection limits, and global maps of the elemental composition of Vesta.

  19. Finite Element Verification of Non-Homogeneous Strain and Stress Fields during Composite Material Testing

    DEFF Research Database (Denmark)

    Mikkelsen, Lars Pilgaard

    2015-01-01

    strength and fatigue performance is essential. Nevertheless, testing composites includes some challenges regarding stiffness determination using conventional strain gauges and achieving correct material failure unaffected by the gripping region during fatigue testing. Challenges, which in the present study......, has been addressed using the finite element method. During this, a verification of experimental observations, a deeper understanding on the test coupon loading and thereby improved test methods has been achieved....

  20. Antimicrobial Activity and Elemental Composition of Sarcocephalus latifolius Fruits: An Ethnopharmacological Based Evaluation

    OpenAIRE

    Alsiddig Osama; Sufyan Awadelkarim; Mai Omer; Saga Yasser; Yousra Basher; Thoyba Elmabrouk; Afnan Abdalmaged

    2017-01-01

    Sarcocephalus latifolius have been part of Sudanese ethnomedicine since long time. The current study was conducted to evaluate the antimicrobial activity of Sarcocephalus latifolius fruits and to investigate its elemental composition. The antimicrobial activities of the ethanolic crude extract and solvents fractions (hexane chloroform, acetone and aqua’s) were investigated by the disk diffusion method. These fractions were further screened for the presence of eight secondary metabolites using...

  1. Application of the quadrilateral area coordinate method: a new element for laminated composite plate bending problems

    Institute of Scientific and Technical Information of China (English)

    Song Cen; Xiangrong Fu; Yuqiu Long; Hongguang Li; Zhenhan Yao

    2007-01-01

    Recently, some new quadrilateral finite elements were successfully developed by the Quadrilateral Area Coordinate (QAC) method. Compared with those traditional models using isoparametric coordinates, these new models are less sensitive to mesh distortion. In this paper, a new displacement-based, 4-node 20-DOF (5-DOF per node)quadrilateral bending element based on the first-order shear deformation theory for analysis of arbitrary laminated composite plates is presented. Its bending part is based on the element AC-MQ4, a recent-developed high-performance Mindlin-Reissner plate element formulated by QAC method and the generalized conforming condition method; and its in-plane displacement fields are interpolated by bilinear shape functions in isoparametric coordinates. Furthermore,the hybrid post-processing procedure, which was firstly proposed by the authors, is employed again to improve the stress solutions, especially for the transverse shear stresses. The resulting element, denoted as AC-MQ4-LC, exhibits excellent performance in all linear static and dynamic numerical examples. It demonstrates again that the QAC method, the generalized conforming condition method, and the hybrid post-processing procedure are efficient tools for developing simple, effective and reliable finite element models.

  2. Finite element modelling of woven composite failure modes at the mesoscopic scale: deterministic versus stochastic approaches

    Science.gov (United States)

    Roirand, Q.; Missoum-Benziane, D.; Thionnet, A.; Laiarinandrasana, L.

    2017-09-01

    Textile composites are composed of 3D complex architecture. To assess the durability of such engineering structures, the failure mechanisms must be highlighted. Examinations of the degradation have been carried out thanks to tomography. The present work addresses a numerical damage model dedicated to the simulation of the crack initiation and propagation at the scale of the warp yarns. For the 3D woven composites under study, loadings in tension and combined tension and bending were considered. Based on an erosion procedure of broken elements, the failure mechanisms have been modelled on 3D periodic cells by finite element calculations. The breakage of one element was determined using a failure criterion at the mesoscopic scale based on the yarn stress at failure. The results were found to be in good agreement with the experimental data for the two kinds of macroscopic loadings. The deterministic approach assumed a homogeneously distributed stress at failure all over the integration points in the meshes of woven composites. A stochastic approach was applied to a simple representative elementary periodic cell. The distribution of the Weibull stress at failure was assigned to the integration points using a Monte Carlo simulation. It was shown that this stochastic approach allowed more realistic failure simulations avoiding the idealised symmetry due to the deterministic modelling. In particular, the stochastic simulations performed have shown several variations of the stress as well as strain at failure and the failure modes of the yarn.

  3. The prediction of elemental composition of biomass based on proximate analysis

    Energy Technology Data Exchange (ETDEWEB)

    Shen Jianfeng [School of Power Engineering, Nanjing University of Science and Technology, Xiaolingwei 200, Nanjing 210094 (China); Zhu Shuguang, E-mail: zhushuguang@tsinghua.org.c [School of Power Engineering, Nanjing University of Science and Technology, Xiaolingwei 200, Nanjing 210094 (China); Liu Xinzhi; Zhang Houlei; Tan Junjie [School of Power Engineering, Nanjing University of Science and Technology, Xiaolingwei 200, Nanjing 210094 (China)

    2010-05-15

    Elemental composition is one of the most important properties for biomass utilization. The experimental determination of ultimate analysis data require special instrumentation, while proximate analysis data can be obtained easily by using common equipments. This paper presents new correlations for calculating the elemental composition based on proximate analysis of biomass. The correlations with the effect of ash content taken into account are derived by using 66 data points, and validated by using 20 data points selected from different categories of biomass than that for correlations derivation. The correlations are given as: C = 0.635FC + 0.460VM - 0.095ASH, H = 0.059FC + 0.060VM + 0.010ASH, O = 0.340FC + 0.469VM - 0.023ASH, where 9.2% <= FC <= 32.79%, 57.2% <= VM <= 90.6%, 0.1% <= ASH <= 24.6%, 36.2% <= C <= 53.1%, 4.7% <= H <= 6.61%, and 31.37% <= O <= 48.0% in wt.% on dry basis. The average absolute errors of these correlations are 3.17%, 4.47% and 3.16%, and the average bias errors are 0.19%, -0.34% and 0.19% compared with measured values of C, H and O, respectively. The new developed correlations can be used to compute elemental composition of biomass accurately, especially for those biomass whose ash content are high, based on simple proximate analysis.

  4. The prediction of elemental composition of biomass based on proximate analysis

    Energy Technology Data Exchange (ETDEWEB)

    Jianfeng Shen; Shuguang Zhu; Xinzhi Liu; Houlei Zhang; Junjie Tan [School of Power Engineering, Nanjing University of Science and Technology, Xiaolingwei 200, Nanjing 210094 (China)

    2010-05-15

    Elemental composition is one of the most important properties for biomass utilization. The experimental determination of ultimate analysis data require special instrumentation, while proximate analysis data can be obtained easily by using common equipments. This paper presents new correlations for calculating the elemental composition based on proximate analysis of biomass. The correlations with the effect of ash content taken into account are derived by using 66 data points, and validated by using 20 data points selected from different categories of biomass than that for correlations derivation. The correlations are given as: C = 0.635FC + 0.460VM - 0.095ASH, H = 0.059FC + 0.060VM + 0.010ASH, O = 0.340FC + 0.469VM - 0.023ASH, where 9.2% {<=} FC {<=} 32.79%, 57.2% {<=} VM {<=} 90.6%, 0.1% {<=} ASH {<=} 24.6%, 36.2% {<=} C {<=} 53.1%, 4.7% {<=} H {<=} 6.61%, and 31.37% {<=} O {<=} 48.0% in wt.% on dry basis. The average absolute errors of these correlations are 3.17%, 4.47% and 3.16%, and the average bias errors are 0.19%, -0.34% and 0.19% compared with measured values of C, H and O, respectively. The new developed correlations can be used to compute elemental composition of biomass accurately, especially for those biomass whose ash content are high, based on simple proximate analysis. (author)

  5. A Mixed Multi-Field Finite Element Formulation for Thermopiezoelectric Composite Shells

    Science.gov (United States)

    Lee, Ho-Jun; Saravanos, Dimitris A.

    1999-01-01

    Analytical formulations are presented which account for the coupled mechanical, electrical, and thermal response of piezoelectric composite shell structures. A new mixed multi-field laminate theory is developed which combines "single layer" assumptions for the displacements along with layerwise fields for the electric potential and temperature. This laminate theory is formulated using curvilinear coordinates and is based on the principles of linear thermopiezoelectricity. The mechanics have the inherent capability to explicitly model both the active and sensory responses of piezoelectric composite shells in thermal environment. Finite element equations are derived and implemented for an eight-noded shell element. Numerical studies are conducted to investigate both the sensory and active responses of piezoelectric composite shell structures subjected to thermal loads. Results for a cantilevered plate with an attached piezoelectric layer are com- pared with corresponding results from a commercial finite element code and a previously developed program. Additional studies are conducted on a cylindrical shell with an attached piezoelectric layer to demonstrate capabilities to achieve thermal shape control on curved piezoelectric structures.

  6. Elemental and iron isotopic composition of aerosols collected in a parking structure.

    Science.gov (United States)

    Majestic, Brian J; Anbar, Ariel D; Herckes, Pierre

    2009-09-01

    The trace metal contents and iron isotope composition of size-resolved aerosols were determined in a parking structure in Tempe, AZ, USA. Particulate matter (PM)2.5 microm were collected. Several air toxics (e.g., arsenic, cadmium, and antimony) were enriched above the crustal average, implicating automobiles as an important source. Extremely high levels of fine copper (up to 1000 ng m(-3)) were also observed in the parking garage, likely from brake wear. The iron isotope composition of the aerosols were found to be +0.15+/-0.03 per thousand and +0.18+/-0.03 per thousand for the PM2.5 microm fractions, respectively. The similarity of isotope composition indicates a common source for each size fraction. To better understand the source of iron in the parking garage, the elemental composition in four brake pads (two semi-metallic and two ceramic), two tire tread samples, and two waste oil samples were determined. Striking differences in the metallic and ceramic brake pads were observed. The ceramic brake pads contained 10-20% copper by mass, while the metallic brake pads contained about 70% iron, with very little copper. Both waste oil samples contained significant amounts of calcium, phosphorous, and zinc, consistent with the composition of some engine oil additives. Differences in iron isotope composition were observed between the source materials; most notably between the tire tread (average=+0.02 per thousand) and the ceramic brake linings (average=+0.65 per thousand). Differences in isotopic composition were also observed between the metallic (average=+0.18 per thousand) and ceramic brake pads, implying that iron isotope composition may be used to resolve these sources. The iron isotope composition of the metallic brake pads was found to be identical to the aerosols, implying that brake dust is the dominant source of iron in a parking garage.

  7. The Elemental Composition of High-Energy Cosmic Rays: Measurements with TRACER

    CERN Document Server

    Boyle, P J

    2008-01-01

    TRACER ('Transition Radiation Array for Cosmic Energetic Radiation') is a balloon borne instrument that has been developed to directly measure the composition and energy spectra of individual heavy elements up to 10^15 eV per particle. TRACER achieves a large geometric factor (5 m^2 sr) through the use of a Transition Radiation Detector utilizing arrays of single wire proportional tubes. TRACER has measured the energy spectra of the elements O, Ne, Mg, Si, S, Ar, Ca, and Fe. The energy spectra reach energies in excess of 10^14 eV per particle and exhibit nearly the same spectral index (2.65 +/- 0.05) for all elements.

  8. Multidisciplinary Simulation of Graphite-Composite and Cermet Fuel Elements for NTP Point of Departure Designs

    Science.gov (United States)

    Stewart, Mark E.; Schnitzler, Bruce G.

    2015-01-01

    This paper compares the expected performance of two Nuclear Thermal Propulsion fuel types. High fidelity, fluid/thermal/structural + neutronic simulations help predict the performance of graphite-composite and cermet fuel types from point of departure engine designs from the Nuclear Thermal Propulsion project. Materials and nuclear reactivity issues are reviewed for each fuel type. Thermal/structural simulations predict thermal stresses in the fuel and thermal expansion mis-match stresses in the coatings. Fluid/thermal/structural/neutronic simulations provide predictions for full fuel elements. Although NTP engines will utilize many existing chemical engine components and technologies, nuclear fuel elements are a less developed engine component and introduce design uncertainty. Consequently, these fuel element simulations provide important insights into NTP engine performance.

  9. Dynamic measurement of coal thermal properties and elemental composition of volatile matter during coal pyrolysis

    Directory of Open Access Journals (Sweden)

    Rohan Stanger

    2014-01-01

    Full Text Available A new technique that allows dynamic measurement of thermal properties, expansion and the elemental chemistry of the volatile matter being evolved as coal is pyrolysed is described. The thermal and other properties are measured dynamically as a function of temperature of the coal without the need for equilibration at temperature. In particular, the technique allows for continuous elemental characterisation of tars as they are evolved during pyrolysis and afterwards as a function of boiling point. The technique is demonstrated by measuring the properties of maceral concentrates from a coal. The variation in heats of reaction, thermal conductivity and expansion as a function of maceral composition is described. Combined with the elemental analysis, the results aid in the interpretation of the chemical processes contributing to the physical and thermal behaviour of the coal during pyrolysis. Potential applications in cokemaking studies are discussed.

  10. Shape and Stress Sensing of Multilayered Composite and Sandwich Structures Using an Inverse Finite Element Method

    Science.gov (United States)

    Cerracchio, Priscilla; Gherlone, Marco; Di Sciuva, Marco; Tessler, Alexander

    2013-01-01

    The marked increase in the use of composite and sandwich material systems in aerospace, civil, and marine structures leads to the need for integrated Structural Health Management systems. A key capability to enable such systems is the real-time reconstruction of structural deformations, stresses, and failure criteria that are inferred from in-situ, discrete-location strain measurements. This technology is commonly referred to as shape- and stress-sensing. Presented herein is a computationally efficient shape- and stress-sensing methodology that is ideally suited for applications to laminated composite and sandwich structures. The new approach employs the inverse Finite Element Method (iFEM) as a general framework and the Refined Zigzag Theory (RZT) as the underlying plate theory. A three-node inverse plate finite element is formulated. The element formulation enables robust and efficient modeling of plate structures instrumented with strain sensors that have arbitrary positions. The methodology leads to a set of linear algebraic equations that are solved efficiently for the unknown nodal displacements. These displacements are then used at the finite element level to compute full-field strains, stresses, and failure criteria that are in turn used to assess structural integrity. Numerical results for multilayered, highly heterogeneous laminates demonstrate the unique capability of this new formulation for shape- and stress-sensing.

  11. Elemental and isotopic fingerprint of Argentinean wheat. Matching soil, water, and crop composition to differentiate provenance.

    Science.gov (United States)

    Podio, Natalia S; Baroni, María V; Badini, Raúl G; Inga, Marcela; Ostera, Héctor A; Cagnoni, Mariana; Gautier, Eduardo A; García, Pilar Peral; Hoogewerff, Jurian; Wunderlin, Daniel A

    2013-04-24

    The aim of this study was to investigate if elemental and isotopic signatures of Argentinean wheat can be used to develop a reliable fingerprint to assess its geographical provenance. For this pilot study we used wheat cultivated at three different regions (Buenos Aires, Córdoba, and Entre Ríos), together with matching soil and water. Elemental composition was determined by ICP-MS. δ(13)C and δ(15)N were measured by isotopic ratio mass spectrometry, while (87)Sr/(86)Sr ratio was determined using thermal ionization mass spectrometry. Wheat samples from three sampling sites were differentiated by the combination of 11 key variables (K/Rb, Ca/Sr, Ba, (87)Sr/(86)Sr, Co, Mo, Zn, Mn, Eu, δ(13)C, and Na), demonstrating differences among the three studied regions. The application of generalized Procrustes analysis showed 99.2% consensus between cultivation soil, irrigation water, and wheat samples, in addition to clear differences between studied areas. Furthermore, canonical correlation analysis showed significant correlation between the elemental and isotopic profiles of wheat and those corresponding to both soil and water (r(2) = 0.97, p wheat samples using different statistical methods, showing that wheat elemental and isotopic compositions are mainly related to soil and irrigation water characteristics of the site of growth.

  12. [Road dust loading and chemical composition at major cities in Fujian Province].

    Science.gov (United States)

    Zheng, An; Yang, Bing-yu; Wu, Shui-ping; Wang, Xin-hong; Chen, Xiao-qiu

    2013-05-01

    A total of 57 road dust and 16 urban soil samples were collected from four cities, Xiamen, Zhangzhou, Quanzhou and Putian in Fujian Province, China. Twenty-six elements, eight water soluble ions, organic carbon and elemental carbon in the fraction of particulate diameter less than 2.5 microm (PM2.5) derived through a suspension chamber were analyzed. The average loading of road dust with diameter less than 100 microm in the four cities ranged from 6.99 g x m(-2) to 10.11 g x m(-2), while the loading of PM2.5 ranged from 4.0 mg x m(-2) to 12.5 mg x m(-2). Both the soil and road dust samples were characterized with much higher concentrations of Si, Ca, Al, Fe and K. But for the anthropogenic elements such as Cu, Pb, Zn,Cr and Ti, much lower levels were found in the soil PM2.5, than those in the road dust PM2.5. Significantly higher levels of NH4+, NO3- and SO4(2-) were found in the road dust PM2.5 from Zhangzhou in comparison with those from other cities in this study. The calcium ion (Ca2+) content was significantly positively correlated with the Mg2+ content in the road dust PM2.5 from Xiamen, Zhangzhou and Quanzhou. The levels of organic carbon (OC) in the road dust PM2.5 in these four cities were higher than those reported in Ji'nan, Shijiazhuang and Beijing while the levels of elemental carbon (EC) were all lower than those in the urban road dust from Beijing, Significant positive correlation between EC and OC was found in samples from Quanzhou and Putian, suggesting the same and/or similar sources. The result of mass balance indicated that higher percentage compositions were soil and OM in both Quanzhou and Putian. Based on the cluster analysis, the 57 road dust samples were divided into four types: influenced by atmospheric deposition, influenced by soil dust, influenced by atmospheric deposition and soil dust, and influenced by soil and construction dust.

  13. Major essential oils composition and immunotoxicity activity from leaves of Foeniculum vulgare against Aedes aegypti L.

    Science.gov (United States)

    Chung, Ill-Min; Ro, Hee-Myong; Moon, Huyng-In

    2011-09-01

    The leaves of Foeniculum vulgare (Umbelliferae) were extracted and the major essential oil composition and immunotoxicity effects were studied. The analyses conducted by gas chromatography and mass spectroscopy (GC-MS) revealed the essential oils of F. vulgare leaves. The F. vulgare essential oil yield was 0.97%, and GC/MS analysis revealed that its major constituents were methyl clavicol (46.3%), α-phellandrene (18.2%), fenchone (10.6%), (E)-anethole (11.3%), myrcene (3.4%), and α-pinene (2.1%). The essential oil had a significant toxic effect against early fourth-stage larvae of Aedes aegypti L with an LC(50) value of 41.23 ppm and an LC(90) value of 65.24 ppm. Also, methyl clavicol (≥98.0%), α-phellandrene (≥95.0%), fenchone (≥98.0%), (E)-anethole (≥99.0%), myrcene (≥99.0%), and α-pinene (≥99.0%) were tested against the F(21) laboratory strain of A. aegypti. Fenchone (≥98.0%) and (E)-anethole (≥99.0%) have medium activity with an LC(50) value of 73.11 ppm and 102.41 ppm. The above data indicate that major compounds interaction may play a more important role in the toxicity of essential oil.

  14. Elemental composition of normal primary tooth enamel analyzed with XRMA and SIMS.

    Science.gov (United States)

    Sabel, Nina; Dietz, Wolfram; Lundgren, Ted; Nietzsche, Sandor; Odelius, Hans; Rythén, Marianne; Rizell, Sara; Robertson, Agneta; Norén, Jörgen G; Klingberg, Gunilla

    2009-01-01

    There is an interest to analyze the chemical composition of enamel in teeth from patients with different developmental disorders or syndromes and evaluate possible differences compared to normal composition. For this purpose, it is essential to have reference material. The aim of this study was to, by means of X-ray micro analyses (XRMA) and secondary ion mass spectrometry (SIMS), present concentration gradients for C, O, P and Ca and F, Na, Mg, Cl, K and Sr in normal enamel of primary teeth from healthy individuals. 36 exfoliated primary teeth from 36 healthy children were collected, sectioned, and analyzed in the enamel and dentin with X-ray micro analyses for the content of C, O, P and Ca and F, Na MgCl, K and Sr. This study has supplied reference data for C, O, P and Ca in enamel in primary teeth from healthy subjects. No statistically significant differences in the elemental composition were found between incisors and molars.The ratio Ca/P is in concordance with other studies. Some elements have shown statistically significant differences between different levels of measurement. These results may be used as reference values for research on the chemical composition of enamel and dentin in primary teeth from patients with different conditions and/or syndromes.

  15. Finite element reduction strategy for composite sandwich plates with viscoelastic layers

    Directory of Open Access Journals (Sweden)

    Adriana Amaro Diacenco

    2013-04-01

    Full Text Available Composite materials have been regarded as a convenient strategy in various types of engineering systems such as aeronautical and space structures, as well as architecture and light industry products due to their advantages over the traditional engineering materials, such as their high strength/stiffness relation characteristics and their anti-corrosion properties. This paper is devoted to the finite element modeling of composite laminated structures incorporating viscoelastic materials to the problem of vibration attenuation. However, the typically high dimension of large finite element models of composite structures incorporating viscoelastic materials makes the numerical processes sometimes unfeasible. Within this context, emphasis is placed on a general condensation strategy specially adapted for the case of viscoelastically damped structures, in which a constant (frequency- and temperature-independent reduction basis to be enriched by static residues associated to the applied loads and the viscoelastic forces is used. After presenting the theoretical foundations, the numerical applications of composite plates treated by viscoelastic materials are addressed, and the main features of the methodology are discussed.

  16. Finite element reduction strategy for composite sandwich plates with viscoelastic layers

    Directory of Open Access Journals (Sweden)

    Adriana Amaro Diacenco

    2012-01-01

    Full Text Available Composite materials have been regarded as a convenient strategy in various types of engineering systems such as aeronautical and space structures, as well as architecture and light industry products due to their advantages over the traditional engineering materials, such as their high strength/stiffness relation characteristics and their anti-corrosion properties. This paper is devoted to the finite element modeling of composite laminated structures incorporating viscoelastic materials to the problem of vibration attenuation. However, the typically high dimension of large finite element models of composite structures incorporating viscoelastic materials makes the numerical processes sometimes unfeasible. Within this context, emphasis is placed on a general condensation strategy specially adapted for the case of viscoelastically damped structures, in which a constant (frequency- and temperature-independent reduction basis to be enriched by static residues associated to the applied loads and the viscoelastic forces is used. After presenting the theoretical foundations, the numerical applications of composite plates treated by viscoelastic materials are addressed, and the main features of the methodology are discussed.

  17. MULTILAYERED PLATE ELEMENTS WITH NODE-DEPENDENT KINEMATICS FOR THE ANALYSIS OF COMPOSITE AND SANDWICH STRUCTURES

    Directory of Open Access Journals (Sweden)

    Stefano Valvano

    2017-04-01

    Full Text Available In this paper a new plate finite element (FE for the analysis of composite and sandwich plates is proposed. By making use of the node-variable plate theory assumptions, the new finite element allows for a simultaneous analysis of different subregions of the problem domain with different kinematics and accuracy, in a global/local sense. In particular higher-order theories with an Equivalent-Single-Layer (ESL approach are simultaneously used with advanced Layer-Wise (LW models. As a consequence, the computational costs can be reduced drastically by assuming refined theories only in those zones/nodes of the structural domain where the resulting strain and stress states present a complex distribution. On the contrary, computationally cheaper, low-order kinematic assumptions can be used in the remaining parts of the plate where a localized detailed analysis is not necessary. The primary advantage of the present variable-kinematics element and related global/local approach is that no ad-hoc techniques and mathematical artifices are required to mix the fields coming from two different and kinematically incompatible adjacent elements, because the plate structural theory varies within the finite element itself. In other words, the structural theory of the plate element is a property of the FE node in this present approach, and the continuity between two adjacent elements is ensured by adopting the same kinematics at the interface nodes. According to the Unified Formulation by Carrera, the through-the-thickness unknowns are described by Taylor polynomial expansions with ESL approach and by Legendre polynomials with LW approach. Furthermore, the Mixed Interpolated Tensorial Components (MITC method is employed to contrast the shear locking phenomenon. Several numerical investigations are carried out to validate and demonstrate the accuracy and efficiency of the present plate element, including comparison with various closed-form and FE solutions from the

  18. Influence of Finite Element Size in Residual Strength Prediction of Composite Structures

    Science.gov (United States)

    Satyanarayana, Arunkumar; Bogert, Philip B.; Karayev, Kazbek Z.; Nordman, Paul S.; Razi, Hamid

    2012-01-01

    The sensitivity of failure load to the element size used in a progressive failure analysis (PFA) of carbon composite center notched laminates is evaluated. The sensitivity study employs a PFA methodology previously developed by the authors consisting of Hashin-Rotem intra-laminar fiber and matrix failure criteria and a complete stress degradation scheme for damage simulation. The approach is implemented with a user defined subroutine in the ABAQUS/Explicit finite element package. The effect of element size near the notch tips on residual strength predictions was assessed for a brittle failure mode with a parametric study that included three laminates of varying material system, thickness and stacking sequence. The study resulted in the selection of an element size of 0.09 in. X 0.09 in., which was later used for predicting crack paths and failure loads in sandwich panels and monolithic laminated panels. Comparison of predicted crack paths and failure loads for these panels agreed well with experimental observations. Additionally, the element size vs. normalized failure load relationship, determined in the parametric study, was used to evaluate strength-scaling factors for three different element sizes. The failure loads predicted with all three element sizes provided converged failure loads with respect to that corresponding with the 0.09 in. X 0.09 in. element size. Though preliminary in nature, the strength-scaling concept has the potential to greatly reduce the computational time required for PFA and can enable the analysis of large scale structural components where failure is dominated by fiber failure in tension.

  19. Effect of alloying elements on mechanical properties in Cu-15%Cr in-situ composites

    Institute of Scientific and Technical Information of China (English)

    H. G. Suzukit; J. Ma; K. Mihara; S. Sakai; S. Sun

    2004-01-01

    The effects of alloying elements on the mechanical properties as well as electrical conductivity in Cu-15 %Cr(mass fraction) in-situ composites were systematically studied and high strength and high electrical conductive Cu base in-situ composites have been developed. The best combination is the addition of 0.1% to 0.2% Zr, Ti, or Sn in Cu 15 %Cr in-situ composite, thermomechanical treatment to refine the microstructure and optimizing the precipitation of second phase. The strength is controlled by high density of dislocations in the Cu matrix, the lamellar spacing of the second phase, and the fine Cr precipitates. The aging treatment to reduce solute atoms has a beneficial effect on the increase of electrical conductivity. The addition of Zr, or Ti of about 0.15% to 0.2% promotes the precipitation of Cr particles.

  20. Modeling of the mechanical behavior of fiber-reinforced ceramic composites using finite element method (FEM

    Directory of Open Access Journals (Sweden)

    Dimitrijević M.M.

    2014-01-01

    Full Text Available Modeling of the mechanical behavior of fiber-reinforced ceramic matrix composites (CMC is presented by the example of Al2O3 fibers in an alumina based matrix. The starting point of the modeling is a substructure (elementary cell which includes on a micromechanical scale the statistical properties of the fiber, matrix and fiber-matrix interface and their interactions. The numerical evaluation of the model is accomplished by means of the finite element method. The numerical results of calculating the elastic modulus of the composite dependance on the quantity of the fibers added and porosity was compared to experimental values of specimens having the same composition. [Projekat Ministarstva nauke Republike Srbije, br. ON174004 i TVH to project III45012

  1. Compositional analysis of multi-element magnetic nanoparticles with a combined NMR and TEM approach

    Science.gov (United States)

    Gellesch, Markus; Hammerath, Franziska; Süß, Vicky; Haft, Marcel; Hampel, Silke; Wurmehl, Sabine; Büchner, Bernd

    2017-09-01

    The increasing interest in nanoscale materials goes hand in hand with the challenge to reliably characterize the chemical compositions and structural features of nanosized objects in order to relate those to their physical properties. Despite efforts, the analysis of the chemical composition of individual multi-element nanoparticles remains challenging—from the technical point of view as well as from the point of view of measurement statistics. Here, we demonstrate that zero-field solid-state nuclear magnetic resonance (NMR) complements local, single particle transmission electron microscopy (TEM) studies with information on a large assembly of chemically complex nanoparticles. The combination of both experimental techniques gives information on the local composition and structure and provides an excellent measurement statistic through the corresponding NMR ensemble measurement. This analytical approach is applicable to many kinds of magnetic materials and therefore may prove very versatile in the future research of particulate magnetic nanomaterials.

  2. Multiwalled carbon nanotube/polydimethylsiloxane composite films as high performance flexible electric heating elements

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Jing; Jeong, Young Gyu, E-mail: ygjeong@cnu.ac.kr [Department of Advanced Organic Materials and Textile System Engineering, Chungnam National University, Daejeon 305-764 (Korea, Republic of)

    2014-08-04

    High performance elastomeric electric heating elements were prepared by incorporating various contents of pristine multiwalled carbon nanotube (MWCNT) in polydimethylsiloxane (PDMS) matrix by using an efficient solution-casting and curing technique. The pristine MWCNTs were identified to be uniformly dispersed in the PDMS matrix and the electrical percolation of MWCNTs was evaluated to be at ∼0.27 wt. %, where the electrical resistivity of the MWCNT/PDMS composite films dropped remarkably. Accordingly, the composite films with higher MWCNT contents above 0.3 wt. % exhibit excellent electric heating performance in terms of temperature response rapidity and electric energy efficiency at constant applied voltages. In addition, the composite films, which were thermally stable up to 250 °C, showed excellent heating-cooling cyclic performance, which was associated with operational stability in actual electric heating applications.

  3. Finite Element Model Characterization Of Nano-Composite Thermal And Environmental Barrier Coatings

    Science.gov (United States)

    Yamada, Yoshiki; Zhu, Dongming

    2011-01-01

    Thermal and environmental barrier coatings have been applied for protecting Si based ceramic matrix composite components from high temperature environment in advanced gas turbine engines. It has been found that the delamination and lifetime of T/EBC systems generally depend on the initiation and propagation of surface cracks induced by the axial mechanical load in addition to severe thermal loads. In order to prevent T/EBC systems from surface cracking and subsequent delamination due to mechanical and thermal stresses, T/EBC systems reinforced with nano-composite architectures have showed promise to improve mechanical properties and provide a potential crack shielding mechanism such as crack bridging. In this study, a finite element model (FEM) was established to understand the potential beneficial effects of nano-composites systems such as SiC nanotube-reinforced oxide T/EBC systems.

  4. Discriminating four tectonic settings: Five new geochemical diagrams for basic and ultrabasic volcanic rocks based on log–ratio transformation of major-element data

    Indian Academy of Sciences (India)

    Surendra P Verma; Mirna Guevara; Salil Agrawal

    2006-10-01

    We present five new discriminant function diagrams based on an extensive database representative of basic and ultrabasic rocks from four tectonic settings of island arc, continental rift, ocean-island, and mid-ocean ridge. These diagrams were obtained after loge-transformation of concentration ratios of major-elements – a technique recommended for a correct statistical treatment of compositional data. Higher % success rates (overall values from ∼83 to 97%) were obtained for proposing these new diagrams as compared to those (∼82 to 94%) obtained from the discriminant analysis of the raw major-element concentration data (i.e., without the loge-transformation and without taking ratios of the compositional data, but using exactly the same database to provide an unbiased comparison), suggesting that such a data transformation constitutes a statistically correct and recommended technique. The new diagrams also resulted in less mis-classification of basic and ultrabasic rocks from known tectonic settings than the diagrams obtained from the raw data. The use of these highly successful new discriminant function diagrams is illustrated using Miocene to Recent basic and ultrabasic rocks from three areas of Mexico with complex or controversial tectonic settings (Mexican Volcanic Belt, Los Tuxtlas volcanic field, and Eastern Alkaline Province), as well as older rocks from three areas (Deccan, Malani, and Bastar) of India. Additionally, the major-element data from two ‘known’ continental arc settings are used to show that they are similar to those from the island arc setting. Continental rift setting is inferred for all Mexican cases and for one cratonic area of India (Malani) and an IAB setting for the Bastar craton. The Deccan flood basalt province of India is used to warn against an indiscriminate use of those discrimination diagrams that do not explicitly include the likely setting of the area under evaluation. An Excel template is also provided for an easy

  5. Major and Trace Element Geochemistry of Coals and Intra-Seam Claystones from the Songzao Coalfield, SW China

    Directory of Open Access Journals (Sweden)

    Lei Zhao

    2015-12-01

    Full Text Available Silicic, mafic and alkali intra-seam tonsteins have been known from SW China for a number of years. This paper reports on the geochemical compositions of coals and tonsteins from three seam sections of the Songzao Coalfield, SW China, and evaluates the geological factors responsible for the chemical characteristics of the coal seams, with emphasis on the influence from different types of volcanic ashes. The roof and floor samples of the Songzao coal seams mostly have high TiO2 contents, consistent with a high TiO2 content in the detrital sediment input from the source region, namely mafic basalts from the Kangdian Upland on the western margin of the coal basin. The coals from the Songzao Coalfield generally have high ash yields and are highly enriched in trace elements including Nb, Ta, Zr, Hf, rare earth elements (REE, Y, Hg and Se; some variation occurs among different seam sections due to input of geochemically different volcanic ash materials. The geochemistry of the Songzao coals has also been affected by the adjacent tonstein/K-bentonite bands. The relatively immobile elements that are enriched in the altered volcanic ashes also tend to be enriched in the adjacent coal plies, possibly due to leaching by groundwaters. The coals near the alkali tonstein bands in the Tonghua and Yuyang sections of the Songzao Coalfield are mostly high in Nb, Ta, Zr, Hf, Th, U, REE and Y. Coal samples overlying the mafic K-bentonite in the Tonghua section are high in V, Cr, Zn and Cu. The Datong coal, which has neither visible tonstein layers nor obvious volcanogenic minerals, has high TiO2, V, Cr, Ni, Cu and Zn concentrations in the intervals between the coal plies affected by mafic and alkaline volcanic ashes. This is consistent with the suggestion that a common source material was supplied to the coal basin, derived from the erosion of mafic basaltic rocks of the Kangdian Upland. Although the Songzao coal is generally a high-sulfur coal, most of the

  6. A Seven-Year Major and Trace Element Study of Rain Water in the Barcés River Watershed, A Coruña, NW Spain

    Science.gov (United States)

    Delgado, Jordi; Cereijo-Arango, José Luis; Juncosa-Rivera, Ricardo

    2016-04-01

    Precipitation constitutes an important source of soluble materials to surface waters and, in areas where they are diluted precipitation (either dry or wet) it can be the most relevant solute source. Certain trace elements may have a limited natural availability in soils and rocks although they can be important with respect the operation of different biogeochemical cycles, for the computation of local/regional atmospheric pollutant loads or from the global mass budget. In the present study we report the results obtained in a long-lasting (December 2008-December 2015) monitoring survey of the chemical composition of bulk precipitation as monthly-integrated samples taken at the headwaters of the Barcés river watershed (A Coruña, Spain). This location was selected based on the necessity of quantification of the chemical composition and elemental loads associated with the different water types (stream water, ground water and precipitation) contributing to the flooding of the Meirama lake. Available data includes information on meteorological parameters (air temperature, relative humidity, atmospheric pressure, wind speed and direction, total and PAR radiation and precipitation) as well as a wide bundle of physico-chemical (pH, redox, electrical conductivity, alkalinity, Li, Na, K, Mg, Ca, Sr, Mn, Fe, NH4, Cs, Rb, Ba, Zn, Cu, Sb, Ni, Co, Cr, V, Cd, Ag, Pb, Se, Hg, Ti, Sn, U, Mo, F, Cl, Br, SO4, NO3, NO2, Al, As, PO4, SIO2, B, O2, DIC, DOC) and isotopic (18Ov-smow and 2Hv-smow) constituents. The average pH of local precipitation is 5.6 (n=65) which is consistent with the expected value for natural, unpolluted rain water. Most of the studied elements (eg. Na, Ca, K, Mg, SiO2, etc.) shows significant increases in their concentration in the dry period of the year. That points towards a more significant contribution of dry deposition in these periods compared with the wet ones. The average electrical conductivity is about 67 S/cm while the average chloride

  7. Elemental composition of a deep sediment core from Lake Stocksjoen in the Forsmark area

    Energy Technology Data Exchange (ETDEWEB)

    Stroemgren, Maarten [Umeaa Univ. (Sweden). Dept. of Ecology and Environmental Sciences; Brunberg, Anna-Kristina [Uppsala Univ. (Sweden). Dept. of Ecology and Evolution/Limnology

    2006-10-15

    A deep sediment core was taken from Lake Stocksjoen, situated within the Forsmark site investigation area. The 55 cm long sediment core, representing the entire history of the lake (approx 430 years) was sliced in 5 cm portions and analysed for various chemical elements, using ICP-MS technique. In total, 54 different elements - classified as main elements, heavy metals and trace elements - were analysed. In general terms, three different patterns of stratigraphy were derived from all the analysed elements. Calcium, manganese, lead and mercury occurred in highest concentrations in the upper sediments (<30 cm depth). Phosphorus, zinc, cadmium, antimony, tin and strontium occurred in more even proportions throughout the sediment core. All the other elements were substantially reduced in the upper parts (<30 cm) compared to the deeper parts of the sediment core. Metals that are considered as airborne pollutants were found in low or moderate concentrations. This is in concert with other investigations of pollutants that have been performed in the Forsmark area. The sediment of Lake Stocksjoen is highly organic, and has been so during the entire history of the lake. Much of the organic Material seems to be refractory and less susceptible for mineralisation and respiration during the prevailing environmental conditions. This corresponds well with the characteristic gelatinous cyanophycee gyttja found in the lower parts of the sediment core. Although speculative, the pronounced changes in elemental composition of the sediment at 30 cm depth may correspond to the final isolation of the lake from the Baltic Sea, which occurred approximately 230 years ago. The deeper parts (below 30 cm depth) thus may represent the time period with regular intrusions of brackish water into the lake basin. One important factor governing the environmental conditions and the resulting elemental composition of the sediment is the unusually thick 'microbial mat', which is characteristic

  8. Major and trace-element speciation in deep-sea hydrothermal plumes of Eastern Lau Spreading Center

    Science.gov (United States)

    Sorensen, J. V.; Toner, B.; Dick, G.; Breier, J. A.; Jiang, H.

    2011-12-01

    Hydrothermal venting at mid-ocean ridge systems results in the flux of heat and chemical species from the crust to the cold, oxic waters of the deep ocean. The mixing of these fluids creates a buoyant, rising plume with dynamic biogeochemical processes and rapid physical mixing. The global distribution of these vent systems makes hydrothermal plumes an important source and sink of biogeochemically active elements to ocean basins. The goal of this study is to characterize the transport and fate of the chemical species within individual hydrothermal plumes. By doing so, we hope to understand the interrelationship of physical-chemical gradients present in plumes with trace element uptake by plume particles. To achieve this goal a field study was undertaken at the Eastern Lau Spreading Center (ELSC). The larger study will include analysis of all sites, however here we report the geochemical and trace-element speciation of a single buoyant plume within ABE vent field. A series of replicate sample sets were collected by in situ filtration at 0.5m, 40m, 200m within a buoyant plume using the ROV JASON. Above plume background and near bottom background sample sets were also collected. Hydrothermal plume particles in sample replicates have been analysed for bulk geochemistry, chemical speciation, and particle-by-particle mineralogy. The speciation of iron, a major particle forming element, and the distribution of select trace elements (arsenic, vanadium) is described using chemical mapping, X-ray absorption spectroscopy, and X-ray diffraction. Particle morphology and carbon speciation are described using scanning transmission X-ray microscopy (STXM). This data is being integrated into a physical-geochemical model, and will be used to estimate the energy available to chemlithoautotrophic organisms in plumes. The distribution of minerals and incorporated trace elements (e.g. arsenic) will be used to interpret uptake mechanisms. The research will help us understand processes

  9. Mass loading of selected major and trace elements in Lake Fork Creek near Leadville, Colorado, September-October 2001

    Science.gov (United States)

    Walton-Day, Katherine; Flynn, Jennifer L.; Kimball, Briant A.; Runkel, Robert L.

    2005-01-01

    load to the stream were the parts of the study reach containing inflow from the tribu-taries Halfmoon Creek (calcium) and Willow Creek (sulfate). The Arkansas River and its tributaries upstream from Lake Fork Creek were the source of most of the calcium (70 percent), sulfate (82 percent), manganese (77 percent), lead (78 percent), and zinc (95 percent) loads in the Arkansas River downstream from the Lake Fork confluence. In contrast, Lake Fork Creek was the major source of aluminum (68 percent), copper (65 percent), and iron (87 percent) loads to the Arkansas River downstream from the confluence. Attenuation was not important for calcium, sulfate, or iron. However, other metals loads were reduced up to 81 percent over the study reach (aluminum, 25 percent; copper, 20 percent; manganese, 81 percent; lead, 30 percent; zinc, 72 percent). Metal attenuation in the stream occurred primarily in three locations (1) the irrigation diversion ditch; (2) the beaver pond complex extending from upstream from the Colorado Gulch inflow to just downstream from that inflow; and (3) the stream reach that included the inflow from Willow Creek. The most likely attenuation mechanism is precipitation of metal oxides and hydroxides (primarily manganese), and sorption or coprecipitation of trace elements with the precipitating phase. A mass-balance calculation indicated that the wetland between the Dinero Tunnel and Lake Fork Creek removed iron, had little effect on zinc mass load, and was a source for, or was releasing, aluminum and manganese. In contrast, the wetland that occurred between the Siwatch Tunnel and Lake Fork Creek removed aluminum, iron, manganese, and zinc from the tunnel drainage before it entered the creek. Inflow from the National Fish Hatchery increased dissolved organic carbon concentrations in Lake Fork Creek and slightly changed the composition of the dissolved organic carbon. However, dissolved organic carbon loads increased in the stream reach downs

  10. On the surface elemental composition of non-corroded and corroded dental ceramic materials in vitro.

    Science.gov (United States)

    Milleding, P; Karlsson, S; Nyborg, L

    2003-06-01

    Dental ceramics are traditionally looked upon as inert materials. As many are glass phased, it may be hypothesized that they will be subjected to glass corrosion in aqueous environments. The aim of the study was therefore to analyze the surface elemental composition of glass-phased and all-crystalline ceramics, before and after low- and high-intensity, in vitro corrosion (milli-Q-water at 37+/-2 degrees C for 18 h and 4% acetic acid at 80+/-2 degrees C for 18 h, respectively). The analysis of the surface elemental composition was performed using ESCA. The hypothesis was confirmed. After high-intensity corrosion, the complete wash out of alkali ions, alkaline-earth ions and elemental alumina was found, leaving behind a surface totally dominated by silica. The all-crystalline ceramics, densely sintered alumina and yttria-partially stabilized tetragonal zirconia, displayed only minor surface changes, even after high-intensity corrosion. In comparison to the corrosion testing in acid, the corrosion process in milli-Q-water did not produce different results in principle, except for the lower magnitude of the depletion of alkali ions and the virtually unchanged level of elemental alumina. Unexpectedly, no substantial difference in surface degradation was found between the glass ceramic and the ordinary porcelain-fused-to-metal ceramic or between ceramics of higher sintering temperature and those of low or ultra-low sintering temperature. The composition and microstructure alone did not appear to provide a full explanation for the inter-individual differences in surface corrosion when exposed to comparable environmental conditions.

  11. Speciation of selected trace and major elements in lignite Used in "Nikola Tesla A" power plant (Obrenovac, Serbia

    Directory of Open Access Journals (Sweden)

    ALEKSANDAR POPOVIC

    2005-12-01

    Full Text Available Four samples of milled lignite used in the “Nikola Tesla A” power plant, located in Obrenovac near Belgrade, were subjected to a five-step sequential extraction, comprising of the following phases: distilled water, 1 M ammonium acetate, 0.2 M ammonium oxalate / 0.2 M oxalic acid, acidic solution of H2O2 and a 6 M solution of HCl. The concentrations of the different elements obtained in the extractions were statistically analysed. The majority of the examined elements were found to be most probably associated with inorganic fractions of lignite, only aluminum, silicon, chromium and arsenic have a larger extractable organic/sulfide fraction than an extractable inorganic fraction. Alumosilicates of magnesium (carriers of arsenic, zinc, lead, copper and chromium, silicates of potassium (scavengers of lead and nickel, mixed aluminates of iron and magnesium (carriers of arsenic, zinc, copper and chromium and compounds of iron that do not contain aluminum and magnesium (scavengers of manganese were dissolved in the fifth phase of the sequential extraction. Copper is a substrate of alumosilicates of potassium and magnesium, while zinc and chromium are substrates of compounds of iron leached in the third phase of the sequential extraction. Interphase correlation revealed that the adsorbed and ion-exchangeable fractions of most of the examined elements do not exhibit preferential binding to the components of the inorganic matrix of lignite ash.

  12. Assessment of major and trace elements in soil and sediments from Osamu Utsumi Uranium mine by WDXRF

    Energy Technology Data Exchange (ETDEWEB)

    Guilhen, Sabine N.; Oliveira, Fernando Mendes de; Cotrim, Marycel E.B.; Sakata, Solange K.; Scapin, Marcos A., E-mail: sksakata@ipen.br, E-mail: snguilhen@ipen.br, E-mail: mecotrim@ipen.br, E-mail: mascapin@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Filho, Walter S., E-mail: scassiotti@inb.gov.br [Industrias Nucleares do Brasil (UTM/INB), Caldas, MG (Brazil). Unidade de Tratamento de Minerios

    2015-07-01

    From 1982 to 1995, the Brazilian Nuclear Industries (INB) extracted and processed uranium from the Osamu Utsumi mine, located in Caldas (Minas Gerais/Brazil). After the operations were suspended in the mine, INB was convened to meet national regulatory requirements for decommissioning the mine. Several studies have since been initiated in order to support a safe and responsible closure of the mine. In this context, this work aims to establish and validate a non-destructive methodology for quantitative simultaneous determination of major and minor constituents in soil and sediments from Osamu Utsumi uranium mine by wavelength dispersive X-ray fluorescence spectrometry (WDXRF). The method was validated in accordance to the criteria established by INMETRO (Brazilian's National Institute of Metrology, Quality and Technology). The precision and accuracy achieved are statistically comparable to the National Institute of Standards and Technology's standard reference material, SRM 2709a. The results showed significantly higher amounts of rare-earth elements and uranium in sediment samples, most likely because of the leaching process occurring in the pit's surroundings. This process is promoted by the acid mine drainage (AMD) that solubilized the elements present in the tailings throughout the mine's area. The solubilized elements end up accumulating in the pit water and further depositing up in the sediment. (author)

  13. Circadian phenotype composition is a major predictor of diurnal physical performance in teams

    Directory of Open Access Journals (Sweden)

    Elise Rose Facer-Childs

    2015-10-01

    Full Text Available Team performance is a complex phenomenon involving numerous influencing factors including physiology, psychology, and management. Biological rhythms and the impact of circadian phenotype have not been studied for their contribution to this array of factors so far despite our knowledge of the circadian regulation of key physiological processes involved in physical and mental performance. This study involved 216 individuals from 12 different teams who were categorized into circadian phenotypes using the novel RBUB chronometric test. The composition of circadian phenotypes within each team was used to model predicted daily team performance profiles based on physical performance tests. Our results show that the composition of circadian phenotypes within teams is variable and unpredictable. Predicted physical peak performance ranged from 1.52pm to 8.59pm with performance levels fluctuating by up to 14.88% over the course of the day. The major predictor for peak performance time of day in a team is the occurrence of late circadian phenotypes. We conclude that circadian phenotype is a performance indicator in teams that allows new insight and a better understanding of team performance variation in the course of a day as often observed in different groupings of individuals.

  14. Circadian Phenotype Composition is a Major Predictor of Diurnal Physical Performance in Teams

    Science.gov (United States)

    Facer-Childs, Elise; Brandstaetter, Roland

    2015-01-01

    Team performance is a complex phenomenon involving numerous influencing factors including physiology, psychology, and management. Biological rhythms and the impact of circadian phenotype have not been studied for their contribution to this array of factors so far despite our knowledge of the circadian regulation of key physiological processes involved in physical and mental performance. This study involved 216 individuals from 12 different teams who were categorized into circadian phenotypes using the novel RBUB chronometric test. The composition of circadian phenotypes within each team was used to model predicted daily team performance profiles based on physical performance tests. Our results show that the composition of circadian phenotypes within teams is variable and unpredictable. Predicted physical peak performance ranged from 1:52 to 8:59 p.m. with performance levels fluctuating by up to 14.88% over the course of the day. The major predictor for peak performance time in the course of a day in a team is the occurrence of late circadian phenotypes. We conclude that circadian phenotype is a performance indicator in teams that allows new insight and a better understanding of team performance variation in the course of a day as often observed in different groupings of individuals. PMID:26483754

  15. Elemental composition of green coffee and its contribution to dietary intake.

    Science.gov (United States)

    Şemen, Sevcan; Mercan, Selda; Yayla, Murat; Açıkkol, Münevver

    2017-01-15

    The concentration of twenty-seven elements (Li, Be, B, Mg, Al, P, K, Ca, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Sr, Mo, Cd, Sn, Sb, Ba, Hg, Pb, Bi, Th, and U) in green coffee samples and their infusions were determined by using inductively coupled plasma-mass spectrometry (ICP-MS). Prior to analysis, green coffee samples were prepared by microwave digestion, while infusions were analyzed without any pre-treatment. The accuracy and precision of the proposed methods were verified by recovery experiments. Considering samples; K, Cu, and Al had the highest mean concentrations with 6714.5μgg(-1), 12.1μgg(-1), and 25.9μgg(-1) among major, trace and toxic elements, respectively. The impact of brewing type on leachability of elements was also studied and the results outlined that mean leachability of elements to Turkish coffee were greater than to mud coffee. Furthermore, dietary element intakes through green coffee consumption were also estimated. This is the first study presenting wide range of elements in green coffee brews and calculating dietary intakes.

  16. How Trace Element Levels of Public Drinking Water Affect Body Composition in Turkey.

    Science.gov (United States)

    Cetin, Ihsan; Nalbantcilar, Mahmut Tahir; Tosun, Kezban; Nazik, Aydan

    2017-02-01

    Since waterborne minerals appear in ionic form and are readily absorbed by the gastrointestinal tract, drinking water could be a crucial source of mineral intake. However, no comprehensive research has yet determined how trace elements in drinking water relate to body composition. We aimed to assess the relationship between clinically important trace elements in public drinking water and body composition in average, overweight and obese individuals in Turkey. The study's population consisted of 423 participants: 143 overweight, 138 obese and 142 healthy control individuals, grouped according to clinical cutoff points of body mass index (BMI). We measured levels of lithium (Li), nickel (Ni), lead (Pb), silicon (Si), tin (Sn), strontium (Sr), boron (B), aluminium (Al), barium (Ba) and rubidium (Rb) in samples from wells of municipal water by using inductively coupled plasma mass spectrometry. We gauged all the participants' body composition measurements with a BC-418 body composition analyser. In all the participants, body weight values showed significant positive correlations with Ni levels in drinking water, as did BMI values with Al levels and percentage of obesity with Ni, Si and B levels. In particular, Ni levels showed significant positive correlations with the basal metabolic rate, activity calories, and total activity of participants. Giving findings showing correlations between obesity-related parameters and Al, Si, B and Ni content in drinking water, we hope that these associations will be clarified with further studies including cellular, experimental and clinical studies. Hence, medical practitioners must be aware of trace element levels in drinking water for overweight and obese patients.

  17. Sources of aerosol as determined from elemental composition and size distributions in Beijing

    Science.gov (United States)

    Zhang, Wenjie; Zhuang, Guoshun; Guo, Jinghua; Xu, Dongqun; Wang, Wei; Baumgardner, Darrel; Wu, Zhiyuan; Yang, Wen

    2010-02-01

    Samples of PM 2.5, PM 10, and TSP from 2001 to 2003 have been collected in Beijing during spring (low-dust), spring (high dust), summer and winter. The concentration of TSP, PM 10, and PM 2.5 was most abundant in spring with high dust followed by winter, spring with little dust and summer. The average mass ratios of PM > 10 , PM 2.5-10 and PM 2.5 to TSP show that the large coarse fraction (PM > 10 ) and the fine fraction (PM 2.5) contribute most in spring with high dust while PM 2.5, PM 2.5-10, and PM > 10 contributed similar fractions to TSP in summer and PM 2.5 in winter. Sixteen cascade impaction samples were collected for elemental analysis in 2000 and 2001 and 16 major components were analyzed by PIXE. Based on the characteristics of the size distribution, three different patterns are observed: coarse mode, fine mode and bimodal mode. Different groups showed different characteristics. Crustal elements showed stable size shapes between different seasons, however, pollution elements showed complex and more variations, and the size distribution showed tendency to vary between unimodal fine modes and bimodal modes. Additionally, the concentration of aerosols and the temporal variation of the elements varied significantly according to different meteorological conditions especially on haze-fog weather conditions. Different elements showed different size distributions on haze-fog weather, i.e. crustal elements of Al, Si, Ca showed similar variation with those average days, pollution elements of S, As, Zn showed significantly higher level than those average values but mixed elements of K, Mn, Cu, Pb showed not so higher than those pollution elements. The high S in haze-fog weather was most from water soluble sulfate parts, the bimodal modes of elements showed unimodal variation and the peak of accumulation modes showed tendency variation to the larger sizes in haze-fog weather. However, most crustal elements showed not much increase during haze-fog condition, which is

  18. Meso-damage modelling of polymer based particulate composites using finite element technique

    Science.gov (United States)

    Tsui, Chi Pong

    To develop a new particulate polymer composite (PPC) with desired mechanical properties is usually accomplished by an experimental trial-and-error approach. A new technique, which predicts the damage mechanism and its effects on the mechanical properties of PPC, has been proposed. This meso-mechanical modelling technique, which offers a means to bridge the micro-damage mechanism and the macro-structural behaviour, has been implemented in a finite element code. A three-dimensional finite element meso-cell model has been designed and constructed to simulate the damage mechanism of PPC. The meso-cell model consists of a micro-particle, an interface, and a matrix. The initiation of the particle/polymer matrix debonding process has been predicted on the basis of a tensile criterion. By considering the meso-cell model as a representative volume element (RVE), the effects of damage on the macro-structural constitutive behaviour of PPC have been determined. An experimental investigation has been made on glass beads (GB) reinforced polyphenylene oxides (PPO) for verification of the meso-cell model and the meso-mechanical finite element technique. The predicted constitutive relation has been found to be in good agreement with the experimental results. The results of the in-situ microscopic test also verify the correctness of the meso-cell model. The application of the meso-mechanical finite element modelling technique has been extended to a macro-structural analysis to simulate the response an engineering structure made of PPC under a static load. In the simulation, a damage variable has been defined in terms of the computational results of the cell model in meso-scale. Hence, the damage-coupled constitutive relation of the GB/PPO composite could be derived. A user-defined subroutine VUMAT in FORTRAN language describing the damage-coupled constitutive behaviour has then been incorporated into the ABAQUS finite element code. On a macro-scale, the ABAQUS finite element code

  19. Stress Concentration Study of Laminated Composite with Multiple Holes by Finite Element Analysis

    Directory of Open Access Journals (Sweden)

    Anand.A

    2016-10-01

    Full Text Available A “Composite” is considered as one material when two or more different materials combined together to create superior material. A composite laminate is a composite with combination of layers. They have great applications in many engineering domains like civil, marine, aerospace, biomedical etc. because of their excellent properties like low weight, better mechanical properties and ease of handling and low cost of production. The practical applications of composites enables that the composite structures usually consist cutouts in it in order to get the required design. Thus it is essential to study the behaviour of composites with multiple holes with respect to different applications in order to provide structural stability and to attain better design and mechanical Properties. This work presents Analytical and Finite Element Analysis of rectangular plate with and without multiple circular cut-outs of various sizes. The work is checked for deformation and stress obtained for various loads .The material considered was Glass/Epoxy laminate. The deformation and stress distribution for various loads is analysed by Ansys software. The specimens used are plate without hole, plate with 3 holes of 5mm each, plate with 6mm holes, plate with 8mm holes and plate with 10mm holes. The analytical and numerical results are compared in Stress - Strain curves and Load - Deformation curves and found that both are in good agreement

  20. Modelling of polypropylene fibre-matrix composites using finite element analysis

    Directory of Open Access Journals (Sweden)

    2009-01-01

    Full Text Available Polypropylene (PP fibre-matrix composites previously prepared and studied experimentally were modelled using finite element analysis (FEA in this work. FEA confirmed that fibre content and composition controlled stress distribution in all-PP composites. The stress concentration at the fibre-matrix interface became greater with less fibre content. Variations in fibre composition were more significant in higher stress regions of the composites. When fibre modulus increased, the stress concentration at the fibres decreased and the shear stress at the fibre-matrix interface became more intense. The ratio between matrix modulus and fibre modulus was important, as was the interfacial stress in reducing premature interfacial failure and increasing mechanical properties. The model demonstrated that with low fibre concentration, there were insufficient fibres to distribute the applied stress. Under these conditions the matrix yielded when the applied stress reached the matrix yield stress, resulting in increased fibre axial stress. When the fibre content was high, there was matrix depletion and stress transfer was inefficient. The predictions of the FEA model were consistent with experimental and published data.

  1. Major and trace element geochemistry of Archean sulfidic black shale horizons as a potential vectoring tool for VMS exploration

    Science.gov (United States)

    Chapman, J. B.; Peter, J. M.; Layton-Matthews, D.; Gemmell, J. B.

    2009-05-01

    Metalliferous black shale horizons are a common but minor component of many subaqueous volcanic successions. These horizons are commonly drilled during volcanogenic massive sulfide (VMS) deposit exploration programs. Although ore metal enrichment can be identified by conventional assay methods, matrix dilution and post-burial hydrothermal and metamorphic activity may obscure information on the type and mechanism of metal addition to the shale. We used a combination of geochemical investigations at a variety of scales to discriminate between VMS-prospective and VMS-barren horizons. In addition, element signatures associated with hydrothermal plume fallout were identified and used and to determine relative direction to the palaeo-venting centre. Portable x-ray fluorescence (pXRF) analysers were used to identify and correlate prospective horizons within exploration drill cores. pXRF is a rapid and relatively inexpensive method of analysis that can deliver quantitative geochemical information at a cm-scale and help to identify intervals meriting further, more costly and time-consuming analyses. Subsequently, laser-ablation ICP-MS analysis of metal sulfides was used to constrain hydrothermal, hydrogenous and diagenetic end-member compositions, and to quantify element remobilization during post-burial alteration. These data were then used to refine the pXRF survey methodology and develop primary vectors toward potential concealed base metal deposits.

  2. Elemental Composition and Geochemical Characteristics of Iron-Manganese Nodules in Main Soils of China

    Institute of Scientific and Technical Information of China (English)

    TAN Wen-Feng; LIU Fan; LI Yong-Hua; HU Hong-Qing; HUANG Qiao-Yun

    2006-01-01

    Elemental composition and geochemical characteristics of iron-manganese nodules from nine main soils in China were studied by chemical and multivariate statistical analyses to better understand the reactions and functions of ironmanganese nodules in soils and sediment. Compared to the corresponding soils, Mn, Ba, Cd, Co and Pb had strong accumulation, Ni had moderate accumulation, while Ca, Cu, Fe, Na, P, Sr and Zn accumulated to a minor degree in the iron-manganese nodules. In contrast, Si, Al, K, Mg and Ti were reduced in the iron-manganese nodules. The contents of Ba, Cd, Co, Cu, Ni, Pb and Zn were positively and significantly correlated with that of MnO2 in the iron-manganese nodules, while the contents of Cr, Cu, Ni, Pb and Zn were positively and significantly correlated with that of Fe2O3 in soils. Based on a principle component analysis, the elements of iron-manganese nodules were divided into four groups: 1)Mn, Ba, Cd, Co, Cu, Li, Ni, Pb and Zn that were associated with Mn oxides, 2) Fe, Cr and P that were associated with Fe oxides, 3) Si, K, and Mg that were included in the elemental composition of phyllosilicate, and 4) Ca, Na, Al and Ti that existed in todorokite, birnessite, lithiophorite and phyllosilicate. It was suggested that accumulation, mineralization and specific adsorption were involved in the formation processes of soil iron-manganese nodules.

  3. Stochastic finite element method for random harmonic analysis of composite plates with uncertain modal damping parameters

    Science.gov (United States)

    Sepahvand, K.

    2017-07-01

    Damping parameters of fiber-reinforced composite possess significant uncertainty due to the structural complexity of such materials. Considering the parameters as random variables, this paper uses the generalized polynomial chaos (gPC) expansion to capture the uncertainty in the damping and frequency response function of composite plate structures. A spectral stochastic finite element formulation for damped vibration analysis of laminate plates is employed. Experimental modal data for samples of plates is used to identify and realize the range and probability distributions of uncertain damping parameters. The constructed gPC expansions for the uncertain parameters are used as inputs to a deterministic finite element model to realize random frequency responses on a few numbers of collocation points generated in random space. The realizations then are employed to estimate the unknown deterministic functions of the gPC expansion approximating the responses. Employing modal superposition method to solve harmonic analysis problem yields an efficient sparse gPC expansion representing the responses. The results show while the responses are influenced by the damping uncertainties at the mid and high frequency ranges, the impact in low frequency modes can be safely ignored. Utilizing a few random collocation points, the method indicates also a very good agreement compared to the sampling-based Monte Carlo simulations with large number of realizations. As the deterministic finite element model serves as black-box solver, the procedure can be efficiently adopted to complex structural systems with uncertain parameters in terms of computational time.

  4. Effects of gamma radiation on the Elemental composition of the flour moth Ephestia kuhniella z

    OpenAIRE

    Souka, Soheir; Ashry, Hoda; Abdu, R. M.; El Sawaf, Bahira; Abbasy, Somaya

    1994-01-01

    The effect of gamma radiation on the elemental composition of larvae, pupae and adults stages of the flour moth Ephestia kuhniella after irradiation of eggs to the sterilizing dose was studied. The elemental composition as well as the concentration level of elements detected in the different stages are summarized in the following: تناول البحث دراسة العناصر الرئيسية والنادرة في الأطوار المختلفة لحشرة فراشة الدقيق وتأثير الجرعة المعقمة من أشعة جاما على هذه العناصر . وذلك بهدف تفهم دور هذه ال...

  5. Dynamic Finite Element Analysis of Extensional-Torsional Coupled Vibration in Nonuniform Composite Beams

    Science.gov (United States)

    Hashemi, Seyed M.; Roach, Andrew

    2011-12-01

    The application of a Dynamic Finite Element (DFE) technique to the extensional-torsional free vibration analysis of nonuniform composite beams, in the absence of flexural coupling, is presented. The proposed method is a fusion of the Galerkin weighted residual formulation and the Dynamic Stiffness Matrix (DSM) method, where the basis functions of approximation space are assumed to be the closed form solutions of the differential equations governing uncoupled extensional and torsional vibrations of the beam. The use of resulting dynamic trigonometric interpolation (shape) functions leads to a frequency dependent stiffness matrix, representing both mass and stiffness properties of the beam element. Assembly of the element matrices and the application of the boundary conditions then leads to a frequency dependent nonlinear eigenproblem, which is solved to evaluate the system natural frequencies and modes. Two illustrative examples of uniform and tapered cantilevered, Circumferentially Uniform Stiffness ( CUS), hollow, composite beams are presented. The influence of ply fibre-angle on the natural frequencies is also studied. The correctness of the theory and the superiority of the proposed DFE over the contrasting DSM and conventional FEM methods are confirmed by the published results and numerical checks. The discussion of results is followed by some concluding remarks.

  6. A finite element analysis of a 3D auxetic textile structure for composite reinforcement

    Science.gov (United States)

    Ge, Zhaoyang; Hu, Hong; Liu, Yanping

    2013-08-01

    This paper reports the finite element analysis of an innovative 3D auxetic textile structure consisting of three yarn systems (weft, warp and stitch yarns). Different from conventional 3D textile structures, the proposed structure exhibits an auxetic behaviour under compression and can be used as a reinforcement to manufacture auxetic composites. The geometry of the structure is first described. Then a 3D finite element model is established using ANSYS software and validated by the experimental results. The deformation process of the structure at different compression strains is demonstrated, and the validated finite element model is finally used to simulate the auxetic behaviour of the structure with different structural parameters and yarn properties. The results show that the auxetic behaviour of the proposed structure increases with increasing compression strain, and all the structural parameters and yarn properties have significant effects on the auxetic behaviour of the structure. It is expected that the study could provide a better understanding of 3D auxetic textile structures and could promote their application in auxetic composites.

  7. Using trace element content and lead isotopic composition to assess sources of PM in Tijuana, Mexico

    Science.gov (United States)

    Salcedo, D.; Castro, T.; Bernal, J. P.; Almanza-Veloz, V.; Zavala, M.; González-Castillo, E.; Saavedra, M. I.; Perez-Arvízu, O.; Díaz-Trujillo, G. C.; Molina, L. T.

    2016-05-01

    PM2.5 samples were collected at two urban sites (Parque Morelos (PQM) and CECyTE (CEC)) in Tijuana during the Cal-Mex campaign from May 24 to June 5, 2010. Concentration of trace elements (Mg, Al, Ti, V, Mn, Fe, Co, Ni, Zn, Cu, Ga, As, Se, Rb, Sr, Mo, Cd, Sn, Sb, Ba, La, Ce, and Pb), and Pb isotopic composition were determined in order to study the sources of PM impacting each site. Other chemical analysis (gravimetric, elemental and organic carbon (EC/OC), and polycyclic aromatic hydrocarbons (PAHs)), were also performed. Finally, back-trajectories were calculated to facilitate the interpretation of the chemical data. Trace elements results show that CEC is a receptor site affected by mixed regional sources: sea salt, mineral, urban, and industrial. On the other hand, PQM seems to be impacted mainly by local sources. In particular, Pb at CEC is of anthropogenic, as well as crustal origin. This conclusion is supported by the lead isotopic composition, whose values are consistent with a combination of lead extracted from US mines, and lead from bedrocks in the Mexican Sierras. Some of the time variability observed can be explained using the back-trajectories.

  8. Microstructure and performance of multiwalled carbon nanotube/m-aramid composite films as electric heating elements.

    Science.gov (United States)

    Jeong, Young Gyu; Jeon, Gil Woo

    2013-07-24

    We report microstructure of thermomechanically stable multiwalled carbon nanotube (MWCNT)/poly(m-phenylene isophthalamide) (m-aramid) composite films containing 0.0-10.0 wt % MWCNTs and their performance as electric heating elements. FE-SEM images show that the MWCNTs are well dispersed in the composite films and are wrapped with m-aramid chains and that the interfacial thickness of m-aramid wrapped MWCNTs decreases with the MWCNT content. The electrical resistivity of films varies from ∼10(13) Ω cm for the neat m-aramid to ∼10(0) Ω cm of the film with 10.0 wt % MWCNT owing to the formation of a conductive three-dimensional network of MWCNTs. Accordingly, the performance of MWCNT/m-aramid films as electric heating elements is strongly dependent on MWCNT content as well as applied voltage. For the composite film with 10.0 wt % MWCNT, a maximum temperature of ∼176 °C is attained even at a low applied voltage of 10 V. The excellent performance such as rapid temperature response and high electric power efficiency at given applied voltages is found to be related with the microstructural features of the MWCNT/m-aramid films.

  9. Geometrically-linear and nonlinear analysis of linear viscoelastic composites using the finite element method

    Science.gov (United States)

    Hammerand, Daniel C.

    Over the past several decades, the use of composite materials has grown considerably. Typically, fiber-reinforced polymer-matrix composites are modeled as being linear elastic. However, it is well-known that polymers are viscoelastic in nature. Furthermore, the analysis of complex structures requires a numerical approach such as the finite element method. In the present work, a triangular flat shell element for linear elastic composites is extended to model linear viscoelastic composites. Although polymers are usually modeled as being incompressible, here they are modeled as compressible. Furthermore, the macroscopic constitutive properties for fiber-reinforced composites are assumed to be known and are not determined using the matrix and fiber properties along with the fiber volume fraction. Hygrothermo-rheologically simple materials are considered for which a change in the hygrothermal environment results in a horizontal shifting of the relaxation moduli curves on a log time scale, in addition to the usual hygrothermal loads. Both the temperature and moisture are taken to be prescribed. Hence, the heat energy generated by the viscoelastic deformations is not considered. When the deformations and rotations are small under an applied load history, the usual engineering stress and strain measures can be used and the time history of a viscoelastic deformation process is determined using the original geometry of the structure. If, however, sufficiently large loads are applied, the deflections and rotations will be large leading to changes in the structural stiffness characteristics and possibly the internal loads carried throughout the structure. Hence, in such a case, nonlinear effects must be taken into account and the appropriate stress and strain measures must be used. Although a geometrically-nonlinear finite element code could always be used to compute geometrically-linear deformation processes, it is inefficient to use such a code for small deformations, due to

  10. Stepwise evolution of two giant composite LTR-retrotransposon-like elements DA and Xiao

    Directory of Open Access Journals (Sweden)

    Li Xuanyang

    2009-06-01

    Full Text Available Abstract Background We recently discovered two composite long terminal repeat (LTR-retrotransposon-like elements which we named DA (~300 kb and Xiao (~30 kb, meaning big and small in Chinese respectively. Xiao and DA (three types of DA identified were found to have been derived from several donor sites and have spread to 30 loci in the human genome, totaling to 5 Mb. Our bioinformatics analyses with the released human, chimp, rhesus macaque, orangutan, and marmoset genomic sequences indicate that DA and Xiao emerged ~25 million years (Myr ago. Results To better understand the evolution of these two complex elements, we investigated various internal junctions of DA and Xiao as well as orthologous genomic sites of the 30 DA/Xiao loci in non-human primates including great apes, lesser apes, Old World monkeys, New World monkeys, and a prosimian. We found that Xiao and type I DA first emerged in the genome between 25 and 18 Myr ago, whereas type II and Type III DAs emerged between 14 and 7 Myr ago. Xiao and DA were most active in great apes, with their amplification peaking during 25-14 and 14-7 Myr ago, respectively. Neither DA nor Xiao seem to have been active in the human and chimp genomes during last 6 Myr. Conclusion The study has led to a more accurate age determination of the DA and Xiao elements than our previous bioinformatics analyses, and indicates that the amplification activity of the elements coincided with that of group I HERV-Es during evolution. It has also illustrated an evolutionary path with stepwise structural changes for the elements during past 25 Myr, and in doing so has shed more light on these two intriguing and complex elements that have reshaped our genome.

  11. Comparison of Damage Path Predictions for Composite Laminates by Explicit and Standard Finite Element Analysis Tools

    Science.gov (United States)

    Bogert, Philip B.; Satyanarayana, Arunkumar; Chunchu, Prasad B.

    2006-01-01

    Splitting, ultimate failure load and the damage path in center notched composite specimens subjected to in-plane tension loading are predicted using progressive failure analysis methodology. A 2-D Hashin-Rotem failure criterion is used in determining intra-laminar fiber and matrix failures. This progressive failure methodology has been implemented in the Abaqus/Explicit and Abaqus/Standard finite element codes through user written subroutines "VUMAT" and "USDFLD" respectively. A 2-D finite element model is used for predicting the intra-laminar damages. Analysis results obtained from the Abaqus/Explicit and Abaqus/Standard code show good agreement with experimental results. The importance of modeling delamination in progressive failure analysis methodology is recognized for future studies. The use of an explicit integration dynamics code for simple specimen geometry and static loading establishes a foundation for future analyses where complex loading and nonlinear dynamic interactions of damage and structure will necessitate it.

  12. An efficient finite element with layerwise mechanics for smart piezoelectric composite and sandwich shallow shells

    Science.gov (United States)

    Yasin, M. Yaqoob; Kapuria, S.

    2014-01-01

    In this work, we present a new efficient four-node finite element for shallow multilayered piezoelectric shells, considering layerwise mechanics and electromechanical coupling. The laminate mechanics is based on the zigzag theory that has only seven kinematic degrees of freedom per node. The normal deformation of the piezoelectric layers under the electric field is accounted for without introducing any additional deflection variables. A consistent quadratic variation of the electric potential across the piezoelectric layers with the provision of satisfying the equipotential condition of electroded surfaces is adopted. The performance of the new element is demonstrated for the static response under mechanical and electric potential loads, and for free vibration response of smart shells under different boundary conditions. The predictions are found to be very close to the three dimensional piezoelasticity solutions for hybrid shells made of not only single-material composite substrates, but also sandwich substrates with a soft core for which the equivalent single layer (ESL) theories perform very badly.

  13. Free material stiffness design of laminated composite structures using commercial finite element analysis codes

    DEFF Research Database (Denmark)

    Henrichsen, Søren Randrup; Lindgaard, Esben; Lund, Erik

    2015-01-01

    In this work optimum stiffness design of laminated composite structures is performed using the commercially available programs ANSYS and MATLAB. Within these programs a Free Material Optimization algorithm is implemented based on an optimality condition and a heuristic update scheme. The heuristic...... update scheme is needed because commercially available finite element analysis software is used. When using a commercial finite element analysis code it is not straight forward to implement a computationally efficient gradient based optimization algorithm. Examples considered in this work are a clamped......-clamped 2D plate loaded in two load cases and a point loaded six layered 3D double curved corner hinged shell. The first example displays the effect of varying the size of patches having the same parametrization, and the second illustrates the benefit of using a layered free material parametrization...

  14. Special hybrid stress element for stress analyses around circular cutouts in laminated composites

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A 3-dimensional hybrid stress element with a traction-free cylindrical surface based on amodified complementary energy principle has been derived for efficient and accurate analysis of stressconcentration around circular cutouts in thin to thick laminated composites. New expressions of sixstress components are developed by using three stress-functions in cylindrical co-ordinates, so that thehomogeneous equilibrium equations, the interlayer surface transverse-stresses and the traction-freeboundary condition on the cylindrical surface are satisfied exactly, while the interelement traction conti-nuity has been relaxed via the Lagrange multiplier method. Transverse-shear deformation effects areincorporated in each layer with displacement continuity enforced along interlayer surface. Selected ex-amples are used to demonstrate the efficiency and accuracy of the present special element.

  15. Elemental stoichiometry and compositions of weevil larvae and two acorn hosts under natural phosphorus variation

    Science.gov (United States)

    Ji, Huawei; Du, Baoming; Liu, Chunjiang

    2017-04-01

    To understand how different trophic organisms in a parasite food chain adapt to the differences in soil nutrient conditions, we investigated stoichiometric variation and homeostasis of multiple elements in two acorn trees, Quercus variabilis and Quercus acutissima, and their parasite weevil larvae (Curculio davidi Fairmaire) at phosphorus (P)-deficient and P-rich sites in subtropical China where P-rich ores are scattered among dominant P-deficient soils. Results showed that elemental stoichiometry and compositions of both acorns and weevil larvae differed significantly between P-deficient and P-rich sites (p plants and animals to P loading, a worldwide issue from excess release of P into the environment.

  16. Detecting changes in the nutritional value and elemental composition of transgenic sorghum grain

    Energy Technology Data Exchange (ETDEWEB)

    Ndimba, R., E-mail: rminnis@tlabs.ac.za [iThemba LABS, National Research Foundation (South Africa); Institute for Plant Biotechnology, University of Stellenbosch, Matieland (South Africa); Grootboom, A.W.; Mehlo, L.; Mkhonza, N.L. [Council for Scientific and Industrial Research (CSIR) Biosciences, Pretoria (South Africa); Kossmann, J. [Institute for Plant Biotechnology, University of Stellenbosch, Matieland (South Africa); Barnabas, A.D.; Mtshali, C. [iThemba LABS, National Research Foundation (South Africa); Pineda-Vargas, C. [iThemba LABS, National Research Foundation (South Africa); Faculty of Health and Wellness Sciences, CPUT, Bellville (South Africa)

    2015-11-15

    We have previously demonstrated that poor digestibility in sorghum can be addressed by using RNA interference (RNAi) to suppress kafirin synthesis. The approach resulted in a twofold improvement in overall protein digestibility levels. In the present study, the effect of this targeted kafirin suppression on other grain quality parameters was investigated. Several significant changes in the proximate composition, amino acid profile and the bulk mineral content were detected. Importantly, the most limiting amino acid, lysine, was significantly increased in the transgenic grains by up to 39%; whilst mineral elements in the bulk, such as sulphur (S) and zinc (Zn) were reduced by up to 15.8% and 21% respectively. Elemental mapping of the grain tissue, using micro-PIXE, demonstrated a significant decrease in Zn (>75%), which was localised to the outer endosperm region, whilst TEM revealed important changes to the protein body morphology of the transgenic grains.

  17. Detecting changes in the nutritional value and elemental composition of transgenic sorghum grain

    Science.gov (United States)

    Ndimba, R.; Grootboom, A. W.; Mehlo, L.; Mkhonza, N. L.; Kossmann, J.; Barnabas, A. D.; Mtshali, C.; Pineda-Vargas, C.

    2015-11-01

    We have previously demonstrated that poor digestibility in sorghum can be addressed by using RNA interference (RNAi) to suppress kafirin synthesis. The approach resulted in a twofold improvement in overall protein digestibility levels. In the present study, the effect of this targeted kafirin suppression on other grain quality parameters was investigated. Several significant changes in the proximate composition, amino acid profile and the bulk mineral content were detected. Importantly, the most limiting amino acid, lysine, was significantly increased in the transgenic grains by up to 39%; whilst mineral elements in the bulk, such as sulphur (S) and zinc (Zn) were reduced by up to 15.8% and 21% respectively. Elemental mapping of the grain tissue, using micro-PIXE, demonstrated a significant decrease in Zn (>75%), which was localised to the outer endosperm region, whilst TEM revealed important changes to the protein body morphology of the transgenic grains.

  18. Finite element investigations on the microstructure of fibre-reinforced composites

    Directory of Open Access Journals (Sweden)

    2008-09-01

    Full Text Available The effect of residual stress due to the curing process on damage evolution in unidirectional (UD fibre-reinforced polymer-matrix composites under longitudinal and transverse loading has been investigated using a three-dimensional micromechanical representative volume element (RVE model with a hexagonal packing geometry and the finite element method. Residual stress has been determined by considering two contributions: volume shrinkage of matrix resin from the crosslink polymerization during isothermal curing and thermal contraction of both resin and fibre as a result of cooling from the curing temperature to room temperature. To examine the effect of residual stress on failure, a study based on different failure criteria and a stiffness degradation technique has been used for damage analysis of the RVE subjected to mechanical loading after curing for a range of fibre volume fractions. Predicted damage initiation and evolution are clearly influenced by the presence of residual stress.

  19. Finite Element Model for Failure Study of Two-Dimensional Triaxially Braided Composite

    Science.gov (United States)

    Li, Xuetao; Binienda, Wieslaw K.; Goldberg, Robert K.

    2010-01-01

    A new three-dimensional finite element model of two-dimensional triaxially braided composites is presented in this paper. This meso-scale modeling technique is used to examine and predict the deformation and damage observed in tests of straight sided specimens. A unit cell based approach is used to take into account the braiding architecture as well as the mechanical properties of the fiber tows, the matrix and the fiber tow-matrix interface. A 0 deg / plus or minus 60 deg. braiding configuration has been investigated by conducting static finite element analyses. Failure initiation and progressive degradation has been simulated in the fiber tows by use of the Hashin failure criteria and a damage evolution law. The fiber tow-matrix interface was modeled by using a cohesive zone approach to capture any fiber-matrix debonding. By comparing the analytical results to those obtained experimentally, the applicability of the developed model was assessed and the failure process was investigated.

  20. Bioagent Sample Matching using Elemental Composition Data: an Approach to Validation

    Energy Technology Data Exchange (ETDEWEB)

    Velsko, S P

    2006-04-21

    Sample matching is a fundamental capability that can have high probative value in a forensic context if proper validation studies are performed. In this report we discuss the potential utility of using the elemental composition of two bioagent samples to decide if they were produced in the same batch, or by the same process. Using guidance from the recent NRC study of bullet lead analysis and other sources, we develop a basic likelihood ratio framework for evaluating the evidentiary weight of elemental analysis data for sample matching. We define an objective metric for comparing two samples, and propose a method for constructing an unbiased population of test samples. We illustrate the basic methodology with some existing data on dry Bacillus thuringiensis preparations, and outline a comprehensive plan for experimental validation of this approach.

  1. PHYTOCHEMICAL SCREENING AND MINERAL ELEMENTS COMPOSITION OF CORDYCEPS SINENSIS AND ITS BASED PRODUCT (ESULIN

    Directory of Open Access Journals (Sweden)

    Farah Atiqah Ab Rahman

    2015-12-01

    Full Text Available Screening of phytochemical and mineral elements composition of Cordyceps sinensis and its based product, Esulin were carried out in order to provide a basis for further research on the therapeutic value of these herbs. The results of both aqueous extracts positively showed the presence of several bioactive compounds like alkaloids, saponins, tannins, and flavonoids. However, terpenoids only present in the aqueous extract of Esulin. In addition, the levels of copper, zinc, cadmium, ferum, lead and nickel of both extracts were below the maximum permissible level suggested by World Health Organization (1989 & Malaysian Food Law (1985. The presence of phytochemical components and mineral elements in the aqueous extract of Cordyceps sinensis and Esulin might contribute to their therapeutic applications in medicinal practices.

  2. A SIMPLE FINITE ELEMENT FOR NON-LINEAR ANALYSIS OF COMPOSITE PLATES

    Directory of Open Access Journals (Sweden)

    V.B. Tungikar

    2011-06-01

    Full Text Available Finite Element Analysis for geometrically nonlinear behaviour of laminated composite plates is presented andcompared with the reported investigations. However structural non-linearity is encountered in certain cases andneeds attention. A higher order displacement field that accounts for transverse shear effects under geometricnonlinear condition is employed in the formulation of a four node, rectangular, element with thirteen degrees offreedom per node. First order Zigzag terms have been included in displacement field for improvement in theresponse. Von Karman strain approach is considered in the present analysis. Incremental Pica iterative scheme isused to solve resulting nonlinear equilibrium equations. The formulation demonstrates its excellence in theperformance for predicting response at various lay ups and plies conditions.

  3. Comparison of the elemental composition of office document paper: evidence in a homicide case.

    Science.gov (United States)

    Spence, Lindsay D; Francis, Rod B; Tinggi, Ujang

    2002-05-01

    Fraudulent substitution of a page within a multiple page document such as a will or business contract, the counterfeit manufacture of paper banknotes, and linking ransom or extortion notes have all been the focus of criminal investigations at one time or another. In a recent homicide investigation, document examiners were requested to compare a threatening letter received by a business partner of the deceased with paper samples seized under warrant from a suspect's house. Through a quantitative elemental analysis of the concentrations of nine elements (Na, Mg, Al, Mn, Sr, Y, Ba, La, and Ce) within the questioned and specimen documents, determined by inductively coupled plasma-mass spectrometry (ICP-MS), it was concluded that (i) the paper of the threatening letter originated from a different source to that of the paper seized from the suspect's house and (ii) all six pages of paper seized from the suspect's house originated from the same source. This discrimination of paper is presented as both a statistical t-test analysis (99.9% confidence limit) as well as construction of an elemental fingerprint for individual replicates within the questioned and specimen sample populations. This is the first reported use of the comparison of the elemental composition of document paper, determined by ICP-MS, to assist in a criminal investigation.

  4. Multi-elemental composition and physical properties of honey samples from Malaysia.

    Science.gov (United States)

    Chua, Lee Suan; Abdul-Rahaman, Norul-Liza; Sarmidi, Mohamad Roji; Aziz, Ramlan

    2012-12-01

    The elemental profiles of six honey samples from Malaysia had been constructed using the data obtained from both ICP-AES and ICP-MS. Potassium and sodium were the most abundant minerals covering from 69.3-78.6% and 14.1-28.7%, respectively. The ratio of potassium to sodium was more than one. Even though the minerals and trace elements composition varied dependent on the type of honey samples, there was no statistically significant difference between the analysed honey samples, namely tualang, gelam, acacia and a few forest honeys based on two-factor ANOVA and cluster analysis. The total element content of honey samples were strongly correlated with the electrical conductivity, but only have moderate correlation with the ash content and honey colour based on the regression analysis. PCA result on the available elemental data from worldwide honeys, including honey samples from Malaysia revealed that potassium and sodium were the mineral markers to distinguish honey origin. Both tualang and gelam honey samples from Malaysia have close mineral profile with sesame honeys from Egypt and multifloral honeys from India, whereas forest honeys Malaysia were near to avocado honeys from Spain and multifloral honeys from India. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Probabilistic Design of Hollow Airfoil Composite Structure by Using Finite Element Method

    Directory of Open Access Journals (Sweden)

    Mr. Sachin M. Shinde

    2014-04-01

    Full Text Available This study represents simulation of Airfoil composite beam by using Monte Carlo method. A three dimensional static analysis of large displacement type has been carried out. Finite element analysis of NACA0012 airfoil composite structure has been carried out and uncertainty in bending stress is analyzed. Bending stress was objective function. Chord length , beam length ,elastic modulus in XY,YZ,XZ and shear modulus of epoxy graphite in XY,YZ,XZ, ply angle and ply thickness of airfoil section, force are varied within effective range and their effect on bending stress has been analyzed. In order to validate the results, one loop of simulation is benchmarked from results in literature. Ultimately, best set of probabilistic design variable is proposed to reduce bending stress under static loading condition.

  6. Probabilistic Design of Hollow Circular Composite Structure by using Finite Element Method

    Directory of Open Access Journals (Sweden)

    Mr. Sachin M. Shinde

    2014-10-01

    Full Text Available This study represents simulation of hollow circular composite beam by using Monte Carlo method. A three dimensional static analysis of large displacement type has been carried out. Finite element analysis of hollow circular composite structure has been carried out and uncertainty in bending stress is analyzed. Bending stress was objective function. Beam length, beam radius, elastic modulus, shear modulus and Poisson ratio of epoxy graphite, ply angles of hollow circular section and force are randomly varied within effective range and their effect on bending stress has been analyzed. In order to validate the results, one loop of simulation is benchmarked from results in literature. Ultimately, best set of probabilistic design variable is proposed to reduce bending stress under static loading condition.

  7. Finite element modeling and analysis of piezo-integrated composite structures under large applied electric fields

    Science.gov (United States)

    Rao, M. N.; Tarun, S.; Schmidt, R.; Schröder, K.-U.

    2016-05-01

    In this article, we focus on static finite element (FE) simulation of piezoelectric laminated composite plates and shells, considering the nonlinear constitutive behavior of piezoelectric materials under large applied electric fields. Under the assumptions of small strains and large electric fields, the second-order nonlinear constitutive equations are used in the variational principle approach, to develop a nonlinear FE model. Numerical simulations are performed to study the effect of material nonlinearity for piezoelectric bimorph and laminated composite plates as well as cylindrical shells. In comparison to the experimental investigations existing in the literature, the results predicted by the present model agree very well. The importance of the present nonlinear model is highlighted especially in large applied electric fields, and it is shown that the difference between the results simulated by linear and nonlinear constitutive FE models cannot be omitted.

  8. Homogenized Finite Element Analysis on Effective Elastoplastic Mechanical Behaviors of Composite with Imperfect Interfaces

    Directory of Open Access Journals (Sweden)

    Wu-Gui Jiang

    2014-12-01

    Full Text Available A three-dimensional (3D representative volume element (RVE model was developed for analyzing effective mechanical behavior of fiber-reinforced ceramic matrix composites with imperfect interfaces. In the model, the fiber is assumed to be perfectly elastic until its tensile strength, and the ceramic material is modeled by an elasto-plastic Drucker-Prager constitutive law. The RVE model is then used to study the elastic properties and the tensile strength of composites with imperfect interfaces and validated through experiments. The imperfect interfaces between the fiber and the matrix are taken into account by introducing some cohesive contact surfaces. The influences of the interface on the elastic constants and the tensile strengths are examined through these interface models.

  9. Homogenized finite element analysis on effective elastoplastic mechanical behaviors of composite with imperfect interfaces.

    Science.gov (United States)

    Jiang, Wu-Gui; Zhong, Ren-Zhi; Qin, Qing H; Tong, Yong-Gang

    2014-12-16

    A three-dimensional (3D) representative volume element (RVE) model was developed for analyzing effective mechanical behavior of fiber-reinforced ceramic matrix composites with imperfect interfaces. In the model, the fiber is assumed to be perfectly elastic until its tensile strength, and the ceramic material is modeled by an elasto-plastic Drucker-Prager constitutive law. The RVE model is then used to study the elastic properties and the tensile strength of composites with imperfect interfaces and validated through experiments. The imperfect interfaces between the fiber and the matrix are taken into account by introducing some cohesive contact surfaces. The influences of the interface on the elastic constants and the tensile strengths are examined through these interface models.

  10. Finite element modeling and fabrication of an SMA-SMP shape memory composite actuator

    Science.gov (United States)

    Souri, Mohammad

    Shape memory alloys and polymers have been extensively researched recently because of their unique ability to recover large deformations. Shape memory polymers (SMPs) are able to recover large deformations compared to shape memory alloys (SMAs), although SMAs have higher strength and are able to generate more stress during recovery. This project focuses on procedure for fabrication and Finite Element Modeling (FEM) of a shape memory composite actuator. First, SMP was characterized to reveal its mechanical properties. Specifically, glass transition temperature, the effects of temperature and strain rate on compressive response and recovery properties of shape memory polymer were studied. Then, shape memory properties of a NiTi wire, including transformation temperatures and stress generation, were investigated. SMC actuator was fabricated by using epoxy based SMP and NiTi SMA wire. Experimental tests confirmed the reversible behavior of fabricated shape memory composites. (Abstract shortened by ProQuest.).

  11. Comparative study of the nutritional composition and toxic elements of farmed and wild Chanodichthys mongolicus

    Science.gov (United States)

    Jiang, Haifeng; Cheng, Xiaofei; Geng, Longwu; Tang, Shizhan; Tong, Guangxiang; Xu, Wei

    2016-09-01

    Information of the difference in quality between farmed and wild fish is central to better ensuring fish products produced in aquaculture meet regulatory and consumer requirements. Proximate composition, amino acid and fatty acid profiles, and toxic elements contents of farmed and wild C. mongolicus were established and compared. Significantly higher crude protein content while lower moisture content in farmed fish compared to wild fish were observed (P values, the ratios of TEAA/TAA (39.84%-40.33%) were comparable to 40% and TEAA / TNEAA (66.22%-67.60%) were above 60%. Fatty acid profiles in both farmed and wild C. mongolicus were dominated by monounsaturated fatty acid (MUFA), with farmed fish contained much more MUFA content compared to wild counterpart (P nutritional quality of farmed C. mongolicus was inferior to their wild counterpart with respect to fatty acids nutrition, and therefore further studies should focus on the improving C. mongolicus diet in order to enhance the overall nutritional composition.

  12. Comparative study of the nutritional composition and toxic elements of farmed and wild Chanodichthys mongolicus

    Science.gov (United States)

    Jiang, Haifeng; Cheng, Xiaofei; Geng, Longwu; Tang, Shizhan; Tong, Guangxiang; Xu, Wei

    2017-07-01

    Information of the difference in quality between farmed and wild fish is central to better ensuring fish products produced in aquaculture meet regulatory and consumer requirements. Proximate composition, amino acid and fatty acid profiles, and toxic elements contents of farmed and wild Chanodichthys mongolicus were established and compared. Significantly higher crude protein content while lower moisture content in farmed fish compared to wild fish were observed ( Pcontent compared to wild counterpart ( Pelement levels (As, Cd, Pb and Hg) in comparison with wild fish, and both were far lower than the established limit standard. In conclusion, our results suggest that the nutritional quality of farmed C. mongolicus was inferior to their wild counterpart with respect to fatty acids nutrition, and therefore further studies should focus on the improving C. mongolicus diet in order to enhance the overall nutritional composition.

  13. submitter Elemental composition and clustering behaviour of α-pinene oxidation products for different oxidation conditions

    CERN Document Server

    Praplan, A P; Bianchi, F; Rissanen, M P; Ehn, M; Jokinen, T; Junninen, H; Adamov, A; Amorim, A; Dommen, J; Duplissy, J; Hakala, J; Hansel, A; Heinritzi, M; Kangasluoma, J; Kirkby, J; Krapf, M; Kürten, A; Lehtipalo, K; Riccobono, F; Rondo, L; Sarnela, N; Simon, M; Tomé, A; Tröstl, J; Winkler, P M; Williamson, C; Ye, P; Curtius, J; Baltensperger, U; Donahue, N M; Kulmala, M; Worsnop, D R

    2015-01-01

    This study presents the difference between oxidised organic compounds formed by α-pinene oxidation under various conditions in the CLOUD environmental chamber: (1) pure ozonolysis (in the presence of hydrogen as hydroxyl radical (OH) scavenger) and (2) OH oxidation (initiated by nitrous acid (HONO) photolysis by ultraviolet light) in the absence of ozone. We discuss results from three Atmospheric Pressure interface Time-of-Flight (APi-TOF) mass spectrometers measuring simultaneously the composition of naturally charged as well as neutral species (via chemical ionisation with nitrate). Natural chemical ionisation takes place in the CLOUD chamber and organic oxidised compounds form clusters with nitrate, bisulfate, bisulfate/sulfuric acid clusters, ammonium, and dimethylaminium, or get protonated. The results from this study show that this process is selective for various oxidised organic compounds with low molar mass and ions, so that in order to obtain a comprehensive picture of the elemental composition o...

  14. Effect of Rare Earths on Composition and Activities of Rare Earth Elements Binding Glycoprotein in Tea

    Institute of Scientific and Technical Information of China (English)

    汪东风; 李俊; 赵贵文; 王常红; 魏正贵; 尹明

    2001-01-01

    The effects of spraying rare earths(RE) on composition and activities of tea polysaccharide were measured by inductively coupled plasma mass spectrometry (ICP-MS), gas chromatography(GC), amino acid analyzer and animal models. The results show that there are rare earth elements binding glycoprotein in tea (REE-TGP). The effects of RE on composition and content of saccharides in REE-TGP are not obvious. The contents of Hypro and Ser in REE-TGP are evidently enhanced in comparison with that in control (not treated with rare earth), but the content of Glu is smaller than that from control. The content of La in REE-TGP from the tea garden sprayed rare earth is 193% higher than that in control. REE-TGP declines content of blood sugar in mice and enhances immunization of rat, which are very evident when the animals are treated by REE-TGP from the tea garden sprayed RE.

  15. Evaluation of Solid Modeling Software for Finite Element Analysis of Woven Ceramic Matrix Composites

    Science.gov (United States)

    Nemeth, Noel N.; Mital, Subodh; Lang, Jerry

    2010-01-01

    Three computer programs, used for the purpose of generating 3-D finite element models of the Repeating Unit Cell (RUC) of a textile, were examined for suitability to model woven Ceramic Matrix Composites (CMCs). The programs evaluated were the open-source available TexGen, the commercially available WiseTex, and the proprietary Composite Material Evaluator (COMATE). A five-harness-satin (5HS) weave for a melt-infiltrated (MI) silicon carbide matrix and silicon carbide fiber was selected as an example problem and the programs were tested for their ability to generate a finite element model of the RUC. The programs were also evaluated for ease-of-use and capability, particularly for the capability to introduce various defect types such as porosity, ply shifting, and nesting of a laminate. Overall, it was found that TexGen and WiseTex were useful for generating solid models of the tow geometry; however, there was a lack of consistency in generating well-conditioned finite element meshes of the tows and matrix. TexGen and WiseTex were both capable of allowing collective and individual shifting of tows within a ply and WiseTex also had a ply nesting capability. TexGen and WiseTex were sufficiently userfriendly and both included a Graphical User Interface (GUI). COMATE was satisfactory in generating a 5HS finite element mesh of an idealized weave geometry but COMATE lacked a GUI and was limited to only 5HS and 8HS weaves compared to the larger amount of weave selections available with TexGen and WiseTex.

  16. Identification of parameters of cohesive elements for modeling of adhesively bonded joints of epoxy composites

    Directory of Open Access Journals (Sweden)

    Kottner R.

    2013-12-01

    Full Text Available Adhesively bonded joints can be numerically simulated using the cohesive crack model. The critical strain energy release rate and the critical opening displacement are the parameters which must be known when cohesive elements in MSC.Marc software are used. In this work, the parameters of two industrial adhesives Hunstman Araldite 2021 and Gurit Spabond 345 for bonding of epoxy composites are identified. Double Cantilever Beam (DCB and End Notched Flexure (ENF test data were used for the identification. The critical opening displacements were identified using an optimization algorithm where the tests and their numerical simulations were compared.

  17. Superficial composition in binary solid solutions A(B): Drastic effect of pure element surface tensions

    Science.gov (United States)

    Rolland, A.; Aufray, B.

    1985-10-01

    This paper deals with a comparative study of surface segragation of Pb and Ni respectively from Ag(Pb)(111) and Ag(Ni)(111) solid solutions. A high level of segregation of the solute is observed for both systems characterized by very low solute solubility. However, the superficial composition strongly depends on the relative surface tensions of the pure elements: the solute atoms are strictly on superficial sites when γ solute is smaller than γ solvent; in contrast uppermost layer consists purely of solvent when γ solute is greater than γ solvent. Two schematic distributions in close proximity to the surface are proposed in the last case.

  18. Hybrid Finite Element Analysis of Free Edge Effect in Symmetric Composite Laminates

    Science.gov (United States)

    1983-06-01

    ANALYSIS OF FREE EDGE EFFECT IN L AUTHOR(S 61102F S.W. Lee237B J.J. Rhiu S.C. Won,, I ~ 7. PENOAMnG ORGANIZATION NAME(S) AND ADORES4 S) L. PERFORMING...ANALYSIS OF FREE EDGE EFFECT IN SYMMETRIC COMPOSITE LAMINATES S. W. Lee I 3. Phi S. C. Wong Department of Aerospace Engineering University of Maryland...collocation method. In this report, we present an efficient hybrid finite element method for analysis of interlaminar stress or free edge effect in

  19. Electrochemical sensor for dopamine based on a novel graphene-molecular imprinted polymers composite recognition element

    DEFF Research Database (Denmark)

    Mao, Yan; Bao, Yu; Gan, Shiyu

    2011-01-01

    A novel composite of graphene sheets/Congo red-molecular imprinted polymers (GSCR-MIPs) was synthesized through free radical polymerization (FRP) and applied as a molecular recognition element to construct dopamine (DA) electrochemical sensor. The template molecules (DA) were firstly absorbed...... at the GSCR surface due to their excellent affinity, and subsequently, selective copolymerization of methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA) was further achieved at the GSCR surface. Potential scanning was presented to extract DA molecules from the imprinted polymers film...

  20. Estimation of Local Delamination Buckling in Orthotropic Composite Plates Using Kirchhoff Plate Finite Elements

    Directory of Open Access Journals (Sweden)

    Zoltán Juhász

    2015-01-01

    Full Text Available We analyse the buckling process of composite plates with through-the-width delamination and straight crack front applying uniaxial compression. We are focusing on the mixed mode buckling case, where the non-uniform distribution of the in-plane forces controls the occurence of the buckling of the delaminated layers. For the analysis, semi-discrete finite elements will be derived based on the Lèvy-type method. The method of harmonic balance is used for taking into account the force distribution that is generally non uniform in-plane.

  1. Impact Wear Properties of Metal-Plastic Multilayer Composites Filled with Glass Fiber Treated with Rare Earth Element Surface Modifier

    Institute of Scientific and Technical Information of China (English)

    程先华; 薛玉君

    2001-01-01

    The friction and wear properties of metal-plastic multilayer composites filled with glass fiber, which is treated with rare earth element surface modifier, under impact load and dry friction conditions were investigated. Experimental results show that the metal-plastic multilayer composite filled with glass fiber exhibits excellent friction and impact wear properties when using rare earth elements as surface modifier for the surface treatment of glass fiber.

  2. Volatile (sulphur and chlorine), major, and trace element geochemistry of mafic to intermediate tephras from the Chilean Southern Volcanic Zone (33-43°S)

    Science.gov (United States)

    Wehrmann, Heidi; Hoernle, Kaj; Jacques, Guillaume; Garbe-Schönberg, Dieter; Schumann, Kai; Mahlke, Julia; Lara, Luis E.

    2014-10-01

    Here we present the first systematic investigation of volatile geochemistry along the Southern Volcanic Zone (SVZ) of Chile. Holocene olivine-hosted melt inclusions in the most mafic tephras sampled from 16 volcanoes along the volcanic front of the SVZ between 33°S and 43°S were analysed for pre-eruptive sulphur, chlorine, and major element contents. These results are combined with trace element compositions of the host whole rocks. The highest fractionation-corrected gas contents occur in the least-degassed melt inclusions from small monogenetic cones of Los Hornitos, Cabeza de Vaca, and Apagado from both the transitional and the southern-central SVZ, reaching ~3,000 μg/g S and 1,400 μg/g Cl, while the lowest abundances of ~1,100 μg/g S and ~600 μg/g Cl were found in the central SVZ at Volcán Lonquimay, Volcán Llaima, and Volcán Villarrica. Chlorine co-varies with trace element indicators for the degree of melting and/or source enrichment, such that the lowest Cl contents are found in high-degree melts from the most depleted mantle sources. The size of the volcanic edifices correlates inversely with Cl abundances in the melt. This could reflect more extensive degassing during ascent through the complex magma plumbing systems beneath the stratovolcanoes or greater dilution during larger degrees of melting of more depleted sources, or a combination of these factors. Compared to other subduction zones, the SVZ melt inclusions exhibit Cl and S abundances in the same range as most of those from the Central American and those from the Marianas arcs.

  3. Modeling dental composite shrinkage by digital image correlation and finite element methods

    Science.gov (United States)

    Chen, Terry Yuan-Fang; Huang, Pin-Sheng; Chuang, Shu-Fen

    2014-10-01

    Dental composites are light-curable resin-based materials with an inherent defect of polymerization shrinkage which may cause tooth deflection and debonding of restorations. This study aimed to combine digital image correlation (DIC) and finite element analysis (FEA) to model the shrinkage behaviors under different light curing regimens. Extracted human molars were prepared with proximal cavities for composite restorations, and then divided into three groups to receive different light curing protocols: regular intensity, low intensity, and step-curing consisting of low and high intensities. For each tooth, the composite fillings were consecutively placed under both unbonded and bonded conditions. At first, the shrinkage of the unbonded restorations was analyzed by DIC and adopted as the setting of FEA. The simulated shrinkage behaviors obtained from FEA were further validated by the measurements in the bonded cases. The results showed that different light curing regimens affected the shrinkage in unbonded restorations, with regular intensity showing the greatest shrinkage strain on the top surface. The shrinkage centers in the bonded cases were located closer to the cavity floor than those in the unbonded cases, and were less affected by curing regimens. The FEA results showed that the stress was modulated by the accumulated light energy density, while step-curing may alleviate the tensile stress along the cavity walls. In this study, DIC provides a complete description of the polymerization shrinkage behaviors of dental composites, which may facilitate the stress analysis in the numerical investigation.

  4. Major- and Trace-Element Concentrations in Soils from Two Geochemical Surveys (1972 and 2005) of the Denver, Colorado, Metropolitan Area

    Science.gov (United States)

    Kilburn, James E.; Smith, David B.; Closs, L. Graham; Smith, Steven M.

    2007-01-01

    Introduction This report contains major- and trace-element concentration data for soil samples collected in 1972 and 2005 from the Denver, Colorado, metropolitan area. A total of 405 sites were sampled in the 1972 study from an area approximately bounded by the suburbs of Golden, Thornton, Aurora, and Littleton to the west, north, east, and south, respectively. This data set included 34 duplicate samples collected in the immediate vicinity of the primary sample. In 2005, a total of 464 sites together with 34 duplicates were sampled from the same approximate localities sampled in 1972 as well as additional sites in east Aurora and the area surrounding the Rocky Mountain Arsenal. Sample density for both surveys was on the order of 1 site per square mile. At each site, sample material was collected from a depth of 0-5 inches. Each sample collected was analyzed for near-total major- and trace-element composition by the following methods: (1) inductively coupled plasma-mass spectrometry (ICP-MS) and inductively coupled plasma-atomic emission spectrometry (ICP-AES) for aluminum, antimony, arsenic, barium, beryllium, bismuth, cadmium, calcium, cerium, cesium, chromium, cobalt, copper, gallium, indium, iron, lanthanum, lead, lithium, magnesium, manganese, molybdenum, nickel, niobium, phosphorus, potassium, rubidium, scandium, silver, sodium, strontium, sulfur, tellurium, thallium, thorium, tin, titanium, tungsten, uranium, vanadium, yttrium, and zinc; and (2) hydride generation-atomic absorption spectrometry for selenium. The samples collected in 2005 were also analyzed by a cold vapor-atomic absorption method for mercury. This report makes available the analytical results of these studies.

  5. Concentrations and source apportionment of PM10 and associated major and trace elements in the Rhodes Island, Greece.

    Science.gov (United States)

    Argyropoulos, Georgios; Manoli, Evangelia; Kouras, Athanasios; Samara, Constantini

    2012-08-15

    Ambient concentrations of PM(10) and associated major and trace elements were measured over the cold and the warm season of 2007 at two sites located in the Rhodes Island (Greece), in Eastern Mediterranean, aimed at source apportionment by Chemical Mass Balance (CMB) receptor modeling. Source chemical profiles, necessary in CMB modeling, were obtained for a variety of emission sources that could possibly affect the study area, including sea spray, geological material, soot emissions from the nearby oil-fuelled thermal power plant, and other anthropogenic activities, such as vehicular traffic, residential oil combustion, wood burning, and uncontrolled open-air burning of agricultural biomass and municipal waste. Source apportionment of PM(10) and elemental components was carried out by employing an advanced CMB version, the Robotic Chemical Mass Balance model (RCMB). Vehicular emissions were found to be major PM(10) contributor accounting, on average, for 36.8% and 31.7% during the cold period, and for 40.9% and 39.2% in the warm period at the two sites, respectively. The second largest source of ambient PM(10), with minor seasonal variation, was secondary sulfates (mainly ammonium and calcium sulfates), with total average contribution around 16.5% and 18% at the two sites. Soil dust was also a remarkable source contributing around 22% in the warm period, whereas only around 10% in the cold season. Soot emitted from the thermal power plant was found to be negligible contributor to ambient PM(10) (<1%), however it appeared to appreciably contribute to the ambient V and Ni (11.3% and 5.1%, respectively) at one of the sites during the warm period, when electricity production is intensified. Trajectory analysis did not indicate any transport of Sahara dust; on the contrary, long range transport of soil dust from arid continental regions of Minor Asia and of biomass burning aerosol from the countries surrounding the Black Sea was considered possible.

  6. The association of LUR modeled PM{sub 2.5} elemental composition with personal exposure

    Energy Technology Data Exchange (ETDEWEB)

    Montagne, Denise; Hoek, Gerard [Institute for Risk Assessment Sciences (IRAS), University of Utrecht, Utrecht (Netherlands); Nieuwenhuijsen, Mark [Center for Research in Environmental Epidemiology (CREAL), Barcelona (Spain); Lanki, Timo; Pennanen, Arto [Department of Environmental Health, National Institute for Health and Welfare (THL), Kuopio (Finland); Portella, Meritxell [Center for Research in Environmental Epidemiology (CREAL), Barcelona (Spain); Meliefste, Kees; Wang, Meng; Eeftens, Marloes [Institute for Risk Assessment Sciences (IRAS), University of Utrecht, Utrecht (Netherlands); Yli-Tuomi, Tarja [Department of Environmental Health, National Institute for Health and Welfare (THL), Kuopio (Finland); Cirach, Marta [Center for Research in Environmental Epidemiology (CREAL), Barcelona (Spain); Brunekreef, Bert [Institute for Risk Assessment Sciences (IRAS), University of Utrecht, Utrecht (Netherlands); Julius Center for Health Sciences and Primary Care, University Medical Center, University of Utrecht, Utrecht (Netherlands)

    2014-09-15

    Background and aims: Land use regression (LUR) models predict spatial variation of ambient concentrations, but little is known about the validity in predicting personal exposures. In this study, the association of LUR modeled concentrations of PM{sub 2.5} components with measured personal concentrations was determined. The elements of interest were copper (Cu), iron (Fe), potassium (K), nickel (Ni), sulfur (S), silicon (Si), vanadium (V) and zinc (Zn). Methods: In Helsinki (Finland), Utrecht (the Netherlands) and Barcelona (Spain) five participants from urban background, five from suburban background and five from busy street sites were selected in each city (15 participants per city). Outdoor, indoor and personal 96-hour PM{sub 2.5} samples were collected by the participants over periods of two weeks in three different seasons (winter, summer and spring/autumn) and the overall average was calculated. Elemental composition was measured by ED-XRF spectrometry. The LUR models for the average ambient concentrations of each element were developed by the ESCAPE project. Results: LUR models predicted the within-city variation of average outdoor Cu and Fe concentrations moderately well (range in R{sup 2} 27–67% for Cu and 24–54% for Fe). The outdoor concentrations of the other elements were not well predicted. The LUR modeled concentration only significantly correlated with measured personal Fe exposure in Utrecht and Ni and V in Helsinki. The LUR model predictions did not correlate with measured personal Cu exposure. After excluding observations with an indoor/outdoor ratio of > 1.5, modeled Cu outdoor concentrations correlated with indoor concentrations in Helsinki and Utrecht and personal concentrations in Utrecht. The LUR model predictions were associated with measured outdoor, indoor and personal concentrations for all elements when the data for the three cities was pooled. Conclusions: Within-city modeled variation of elemental composition of PM{sub 2.5} did not

  7. Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity.

    Science.gov (United States)

    Li, Qian-feng; Wang-Li, Lingjuan; Liu, Zifei; Jayanty, R K M; Shah, Sanjay B; Bloomfield, Peter

    2014-11-01

    Animal feeding operations (AFOs) produce particulate matter (PM) and gaseous pollutants. Investigation of the chemical composition of PM2.5 inside and in the local vicinity of AFOs can help to understand the impact of the AFO emissions on ambient secondary PM formation. This study was conducted on a commercial egg production farm in North Carolina. Samples of PM2.5 were collected from five stations, with one located in an egg production house and the otherfour located in the vicinity ofthe farm alongfour wind directions. The major ions of NH4+, Na+, K+, SO4(2-), Cl-, and NO3- were analyzed using ion chromatography (IC). In the house, the mostly abundant ions were SO4(2-), Cl-, and K+. At ambient stations, SO4(2-), and NH4+ were the two most abundant ions. In the house, NH4+, SO4(2-), and NO3- accounted for only 10% of the PM2.5 mass; at ambient locations, NH4+, SO4(2-), and NO3- accounted for 36-41% of the PM2.5 mass. In the house, NH4+ had small seasonal variations indicating that gas- phase NH3. was not the only major force driving its gas-particle partitioning. At the ambient stations, NH4+ had the highest concentrations in summer In the house, K+, Na+, and Cl- were highly correlated with each other In ambient locations, SO4(2-) and NH4+ had a strong correlation, whereas in the house, SO4(2-) and NH4+ had a very weak correlation. Ambient temperature and solar radiation were positively correlated with NH4+ and SO4(2-). This study suggests that secondary PM formation inside the animal house was not an important source of PM2.5. In the vicinity, NH3 emissions had greater impact on PM2.5 formation.

  8. Dissolved organic carbon and major and trace elements in peat porewater of sporadic, discontinuous, and continuous permafrost zones of western Siberia

    Directory of Open Access Journals (Sweden)

    T. V. Raudina

    2017-07-01

    Full Text Available Mobilization of dissolved organic carbon (DOC and related trace elements (TEs from the frozen peat to surface waters in the permafrost zone is expected to enhance under ongoing permafrost thaw and active layer thickness (ALT deepening in high-latitude regions. The interstitial soil solutions are efficient tracers of ongoing bio-geochemical processes in the critical zone and can help to decipher the intensity of carbon and metals migration from the soil to the rivers and further to the ocean. To this end, we collected, across a 640 km latitudinal transect of the sporadic to continuous permafrost zone of western Siberia peatlands, soil porewaters from 30 cm depth using suction cups and we analyzed DOC, dissolved inorganic carbon (DIC, and 40 major elements and TEs in 0.45 µm filtered fraction of 80 soil porewaters. Despite an expected decrease in the intensity of DOC and TE mobilization from the soil and vegetation litter to the interstitial fluids with the increase in the permafrost coverage and a decrease in the annual temperature and ALT, the DOC and many major and trace elements did not exhibit any distinct decrease in concentration along the latitudinal transect from 62.2 to 67.4° N. The DOC demonstrated a maximum of concentration at 66° N, on the border of the discontinuous/continuous permafrost zone, whereas the DOC concentration in peat soil solutions from the continuous permafrost zone was equal to or higher than that in the sporadic/discontinuous permafrost zone. Moreover, a number of major (Ca, Mg and trace (Al, Ti, Sr, Ga, rare earth elements (REEs, Zr, Hf, Th elements exhibited an increasing, not decreasing, northward concentration trend. We hypothesize that the effects of temperature and thickness of the ALT are of secondary importance relative to the leaching capacity of peat, which is in turn controlled by the water saturation of the peat core. The water residence time in peat pores also plays a role in enriching the

  9. Proximate composition and quantification of fatty acids in five major Brazilian chocolate brands

    Directory of Open Access Journals (Sweden)

    Rúbia Michele Suzuki

    2011-06-01

    Full Text Available The objective of the present study was to characterize the centesimal composition and quantify fatty acids in regular and diet chocolate brands with emphasis on trans fatty acids. Regular and diet dark chocolate samples from the major brands analyzed were purchased from different local supermarkets in the city of Maringá. The brands were labeled with letters and five lots of each brand with three chocolate units per lot were analyzed in triplicate. We observed that the diet chocolates from the same brands presented larger lipid contents. The main fatty acids observed were saturated fatty acids (SFA, myristic acid (14:0, palmitic acid (16:0, and estearic acid (18:0. Among the monounsaturated fatty acids (MUFA, polyunsaturated fatty acids (PUFA and trans fatty acids, oleic acid (18:1n-9, linoleic acid (18:2n-6, and elaidic acid (18:1-9t predominated. The trans fatty acid contents found in the analyzed samples were lower than and/or in accordance with the limits proposed by the Brazilian regulation.

  10. The origin of aubrites: Evidence from lithophile trace element abundances and oxygen isotope compositions

    Science.gov (United States)

    Barrat, J. A.; Greenwood, R. C.; Keil, K.; Rouget, M. L.; Boesenberg, J. S.; Zanda, B.; Franchi, I. A.

    2016-11-01

    We report the abundances of a selected set of "lithophile" trace elements (including lanthanides, actinides and high field strength elements) and high-precision oxygen isotope analyses of a comprehensive suite of aubrites. Two distinct groups of aubrites can be distinguished: (a) the main-group aubrites display flat or light-REE depleted REE patterns with variable Eu and Y anomalies; their pyroxenes are light-REE depleted and show marked negative Eu anomalies; (b) the Mount Egerton enstatites and the silicate fraction from Larned display distinctive light-REE enrichments, and high Th/Sm ratios; Mount Egerton pyroxenes have much less pronounced negative Eu anomalies than pyroxenes from the main-group aubrites. Leaching experiments were undertaken to investigate the contribution of sulfides to the whole rock budget of the main-group aubrites. Sulfides contain in most cases at least 50% of the REEs and of the actinides. Among the elements we have analyzed, those displaying the strongest lithophile behaviors are Rb, Ba, Sr and Sc. The homogeneity of the Δ17O values obtained for main-group aubrite falls [Δ17O = +0.009 ± 0.010‰ (2σ)] suggests that they originated from a single parent body whose differentiation involved an early phase of large-scale melting that may have led to the development of a magma ocean. This interpretation is at first glance in agreement with the limited variability of the shapes of the REE patterns of these aubrites. However, the trace element concentrations of their phases cannot be used to discuss this hypothesis, because their igneous trace-element signatures have been modified by subsolidus exchange. Finally, despite similar O isotopic compositions, the marked light-REE enrichments displayed by Mount Egerton and Larned suggest that they are unrelated to the main-group aubrites and probably originated from a distinct parent body.

  11. Seasonal, Inter-annual and Long Term Trends in the Element Composition of Tropical Tree Rings

    Science.gov (United States)

    Verheyden, A.; Beeckman, H.; Andre, L.

    2008-12-01

    The inorganic composition of Rhizophora mucronata wood was studied on 11 stem discs collected from two mangrove forests in Kenya. The aim of this preliminary study was to assess if elements could be used as proxies of environmental and/or anthropogenic change. Earlywood and late wood were separated and analyzed on ICP-MS and ICP-OES. A remarkable synchronicity was found between ring width and Mg/Ca and Mn/Ca ratios, both of which have been used as soil pH proxies. However, there was also a negative correlation between Ca and ring width, indicating a dilution effect at higher growth rates. The essential elements P and K were significantly higher in fast growing plantation trees, suggesting that these elements might be useful as nutrient proxies in mangrove wood. A high correlation was found between Ca and Sr in the wood, indicating that probably no differentiation is made by the tree during incorporation of these elements in the wood. Since Sr/Ca of seawater is related to salinity, we suggest that the Sr/Ca in the wood could be used as a salinity proxy for tree species growing in brackish waters. Finally, a high-resolution study was also conducted using LA-ICP-MS, which revealed a high spatial variability within one ring. This high variability was the result of different concentrations in each wood cell type analyzed. The heavy metals (Cu, Zn, Pb and Cr), as well as Ba, had highest concentrations in the fibers and lowest in the vessels. On the other hand, B, Mn, Ca, P, and Sr were highest in the rays and vessels and lowest in the fibers, while Mg was the highest in the rays, but lowest in the vessels. The implications of these results for the use of trace elements to delimit chemical ring boundaries in tropical trees will be discussed.

  12. The study of major, trace and rare earth elements geochemistry in Shahrestanak Mn deposit, south of Qom: Implications for genesis

    Directory of Open Access Journals (Sweden)

    Mohammad Maanijou

    2015-04-01

    Full Text Available Introduction The Shahrestanak Mn deposit is located in southern Qom province, 12 km southwest of the city of Kahak. Based on geological-structural divisions of Iran, the deposit belongs to central volcanic belt or Urumieh-Dokhtar zone. The Venarch deposit is one the most important known manganese deposits in Iran. The Sharestanak and Venarch deposits are spatially and temporally related to each other, and have similar geology, mineral texture and structure, host rocks, relationships with faults, and depositional environment. So, their magmatism and deposition conditions can be related to each other. Since no systematic study on the Shahrestanak deposit had been performed before discussing its geological and geochemical characteristics, here it is being attempted to study the geology, petrography, geochemistry of major, minor and trace elements, and Rare Earth Elements (REE of ore, to distinguish the depositional environments and genesis of this deposit and to compare REE of ore in this deposit with other deposits. Sampling and method of study Fourteen samples of manganese ore were selected for geochemical study and analyzing of major, minor, trace elements and REE by ICP-AES and ICP-MS and were sent to SGS Co., Toronto. Detection limits for major elements and trace elements are 0.01% and 0.05ppm, respectively. Result and discussion The deposit is characterized by various lithology and stratigraphy units, consist of: 1 Middle to -Upper Eocene volcano-sedimentary rocks, 2 Oligocene lower red conglomerate and sandstone, 3 Oligo-Miocene limestone and marl (Qom Formation, and 4 Eocene and Lower Miocene basic to intermediate dykes. The most abundant minerals of the deposit are braunite, hausmannite, pyrolusite, and manganite. Evidences such as high Mn/Fe (11.33 and Si/Al (4.86 ratios, low contents of trace elements specially Co (11.40 ppm, Ni (24 ppm, Cu (81.85 ppm, and Ce, with high amounts of SiO2, Mn, Fe, Ba, Zn, As and Sr, all represent

  13. Archaeal community structures in the solfataric acidic hot springs with different temperatures and elemental compositions.

    Science.gov (United States)

    Satoh, Tomoko; Watanabe, Keiko; Yamamoto, Hideo; Yamamoto, Shuichi; Kurosawa, Norio

    2013-01-01

    Archaeal 16S rRNA gene compositions and environmental factors of four distinct solfataric acidic hot springs in Kirishima, Japan were compared. The four ponds were selected by differences of temperature and total dissolved elemental concentration as follows: (1) Pond-A: 93°C and 1679 mg L(-1), (2) Pond-B: 66°C and 2248 mg L(-1), (3) Pond-C: 88°C and 198 mg L(-1), and (4) Pond-D: 67°C and 340 mg L(-1). In total, 431 clones of 16S rRNA gene were classified into 26 phylotypes. In Pond-B, the archaeal diversity was the highest among the four, and the members of the order Sulfolobales were dominant. The Pond-D also showed relatively high diversity, and the most frequent group was uncultured thermoacidic spring clone group. In contrast to Pond-B and Pond-D, much less diverse archaeal clones were detected in Pond-A and Pond-C showing higher temperatures. However, dominant groups in these ponds were also different from each other. The members of the order Sulfolobales shared 89% of total clones in Pond-A, and the uncultured crenarchaeal groups shared 99% of total Pond-C clones. Therefore, species compositions and biodiversity were clearly different among the ponds showing different temperatures and dissolved elemental concentrations.

  14. Determination of elemental composition in dietary supplements by neutron activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Vitor I.; Saiki, Mitiko, E-mail: vitor.ito@outlook.com, E-mail: mitiko@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    Dietary supplements intake has grown in the last years because of their potential health benefits. This supplementation is very common among athletes, elderly population and consumers that want to increase the total daily nutrient intake. Consequently, elemental composition evaluation in these supplements is of great interest due to its increasingly high consumption and the brand variety offered in the market. This study aimed to evaluate the elemental composition in three types of dietary supplements acquired in a pharmacy and drugstore in Sao Paulo city. Concentrations of As, Br, Ca, Co, Cr, Cu, Fe, K, La, Na, Sb, Sc, Se and Zn were determined in these supplements by applying neutron activation analysis (NAA) followed by a gamma ray spectrometry. from the concentrations obtained in the dietary supplement analyses, the data obtained were compared to the values presented on the product label. These comparisons indicated in general, a good agreement of the data obtained and the values of the product label depending on the supplement. From the results obtained it can be concluded that NAA is an important tool for the analysis of this type of products due to its reliability of results and its multielemental character. (author)

  15. Effects of Mo, Zn, Sr and Ba loads on these elements' uptake and oil content and fatty acid composition of rapeseed

    Directory of Open Access Journals (Sweden)

    Kastori Rudolf R.

    2003-01-01

    Full Text Available Studied in the present paper were the long-term effects of the application of high Mo, Zn, Sr and Ba rates (0, 90, 270, and 810 kg ha-1 on rapeseed oil content and oil fatty acid composition. The trace elements were applied in the spring of 1991, while the rapeseed was sown on a calcareous сhernozem soil in 2001. The trace elements differed significantly in their rates of accumulation in rapeseed plants. Relative to the control, the Mo content of the stem increased up to 1,000 times, that of the chaff over 100 times, and that of the seed around 60 times. The levels of the other trace elements increased considerably less relative to the control. The increases were typically twofold to threefold, depending on the plant part involved. The trace elements accumulated the most in the vegetative plant parts, except for Zn, a major quantity of which was found in the seed as well. The application of the high rates of Sr, Zn and, to an extent. Mo reduced the seed oil content of rapeseed. However, the differences were not statistically significant. The application of the trace elements had no significant effect on the fatty acid composition of the rapeseed oil, either. The increased levels of the trace elements found in the rapeseed plants indicate that 11 years after application significant amounts of the applied elements are still present in the soil in a form available to plants. However, the rates were not high enough to affect the synthesis of oil and its fatty acid composition.

  16. Baseline element composition of foliose and fruticose lichens along the steep climatic gradient of SW Patagonia (Aisén Region, Chile).

    Science.gov (United States)

    Monaci, Fabrizio; Fantozzi, Federica; Figueroa, Ricardo; Parra, Oscar; Bargagli, Roberto

    2012-09-01

    Samples of foliose (Nephroma antarcticum) and fruticose (Usnea sp.) lichens were collected across a steep climatic and vegetation gradient in a remote, almost pristine region of SW Chilean Patagonia. Concentrations of major and trace elements in lichens from the rainforest were among the lowest ever reported worldwide for foliose and fruticose lichens and can be considered background levels for the region. The two lichen growth forms showed different elemental compositions mainly due to the greater capacity of foliose thalli to intercept elements from windborne and canopy-leached particles. The patterns of spatial variation in the chemical composition of lichens were effectively explained by statistical methods and reflected the different availability of wet and dry deposition along the steep climatic gradient. Baseline values established for N. antarcticum samples growing in temperate Nothofagus forests were therefore distinct from those of samples growing in more open, drier habitats. The fruticose Usnea sp. showed a higher affinity for atmophile Hg, low concentrations of lithophilic elements, and the same baseline composition whether from temperate forests or from dry, barren environments. The provided background and baseline values against which variations can be measured will be useful in the early detection of local or regional climatic and environmental change, especially in view of the planned construction of hydropower dams under the recently approved HidroAysén Project.

  17. Major and trace elemental analysis in milk powder by inductively coupled plasma-optical emission spectrometry (ICP-OES) and instrumental neutron activation analysis(INAA)

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Major and trace element in seven different kinds of milk powder were studied. The concentration of 24 elements were determined byICP-OES method, from these elements 9 elements determined by INAA. The determination of trace element contents of foodstuffs, especiallymilk as daily drink for all peoples age which being a complex food has great importance. The elemental analysis of milk is important both as anindicator of environmental contamination and because milk is a significant pathway for toxic metal intake and a source of essential nutrients forhumans. The major elements are Ca, K, Mg, Na, P and S. While trace element are B, Ba, Co, Cr, Cu, Fe, Li, Mn, Mo, Ni, Sb, Se,Sn, Sr, V, W and Zn.ICP-OES technique is shown to be a powerful tool for trace determinations in powder samples. This is shown by its use for analysis of aseries of the milk powders mentioned and comparative results of other direct technique such as instrumental neutron activation analysis.Analysis of both standard reference material A-11 milk powder and NBS Orchard leaves for quality accurance had been completed, andused for a relative method calculate. The importance of the major and trace elements to human health was discussed.

  18. Ultrastructure and elemental composition of the eggshell of Reeve's Pheasant (Syrmaticus reevesii)

    Institute of Scientific and Technical Information of China (English)

    CHANG Chongyan; ZHANG Zhengwang; CHEN Xiaoduan; LIU Jinying; SUN Quanhui

    2007-01-01

    The eggshell of Reeve's pheasant (Syrmaticus reevesii) collected from the Dongzhai National Nature Reserve in Henan Province,China was studied.By using scanning electron microscopy and inductively coupled plasma (ICP) spectrometry,the ultrastructure and elemental composition of the eggshell was determined.The study showed that the average thickness of the surface layer of crystals,the palisade and cone layer,and the eggshell membrane were 20.8,220.8 and 62.5 larn,respectively,accounting for 6.8%,72.6% and 20.6% of the total thickness of the eggshell.There were many vesicular holes in the palisade layer with an average diameter of 0.32±0.08 μm(n = 30).The function of these holes might be significant to air exchange.The shape of the eggshell pore on the surface layer of crystals is round or elliptical.The fracture surface of the pore is funnel-shaped.Some granules filled the upper part of the eggshell pores.The content of 21 elements in the eggshell of wild and captive Reeve's pheasants was compared and presented.It indicated that among the elements that made up the eggshell of the wild pheasant,the content of Ca,Mg,P and S was much higher,ω> 1 mg/g,with ω (Ca) being higher than 40% of the eggshell.The contents of Na,Si,Sr,K and A1 were ω = 0.1-1 mg/g,while Fe,Zn,Pb,Mn,Cu,V and Ti had lower concentrations (ω = 1-100 μg/g).The ω ofNi,Cr,Co,Se,Cd were lower than 1 μg/g.The elemental composition in the eggshell of the captive Reeve's pheasant kept in the Dongzhai National Natural Reserve was significantly different from that of the wild species,with a difference of over 20% on S,Cu,Fe,AI,Mn,Si,Sr,Se and Cr.The lower intake of Fe,Mn,Si and Sr on the one hand and the higher intake of S,Cu,Al and Cr on the other hand might be responsible for the low fertility of captive Reeve's pheasants in the Dongzhai National Nature Reserve.In order to ensure that the pheasants are receiving the proper amount of nutrition and to improve their breeding success,the amount of

  19. Oxidative damages to DNA by indoor PM10s: Their relationships with trace element compositions

    Institute of Scientific and Technical Information of China (English)

    SHAO Longyi; ZHAO Houyin; T. P. JONES; LU Senlin; L. MEROLLA

    2005-01-01

    Plasmid DNA assay and ICP-MS analysis were conducted in order to investigate the bioreactivity of inhalable particles (PM10) and the relationship between bioreactivity and trace element compositions of PM10 in Beijing air. A total of four PM10 samples were carefully selected to represent the indoor and corresponding outdoor environments: one from urban smoker's home, two from nonsmoker's homes, and the other from the outdoor. In general, the oxidative damage by indoor PM10 was slightly higher than that of outdoor. Among the four sets of samples, the PM10 from the smoker's home hada lowest TD50 (toxic dose of PM10 causing 50% DNA to damage to plasmid DNA. The ICP-MS analysis combined with the DNA assay showed that the water-soluble zinc levels had better relationship with TD50 values than other elements, implying that water-soluble zinc might play an important role in the damage of DNA. It is concluded that the PM10 in smoker' s home had the highest level of water-soluble zinc as well as the lowest TD50 ( highest bioreactivity).Iron is considered to be one of the most bioreactive elements, but it will cause little damage to plasmid DNA, probably because iron is mainly in water-insoluble state in Beijing PM10.

  20. Source apportionment of major and trace elements in aerosols during smog episodes in large cities in China

    Science.gov (United States)

    Furger, Markus; Rai, Pragati; Visser, Suzanne; Elser, Miriam; Canonaco, Francesco; Slowik, Jay G.; Huang, Ru-Jin; Prévôt, André S. H.; Baltensperger, Urs

    2017-04-01

    Air pollution in Chinese cities is one of the environmental problems China has to address to mitigate the impacts on human health, air quality and climate. Average concentrations of particulate matter exceed 100 μg m-3 in many places in China, and the government is developing and implementing strategies to reduce the load of pollutants by various measures. A characterization of airborne particulate matter (PM), especially its composition and sources, will help in optimizing reduction and mitigation strategies for air pollution. We collected PM10 aerosols with a rotating drum impactor (RDI) in Xi'an in December 2013 and in Beijing in January 2014 with 30-min time resolution and for three size ranges (cut-off sizes 10, 2.5 and 1 μm). Each campaign encompassed one or more high pollution episodes in the respective city. Elements from Na to Pb were analyzed with synchrotron radiation induced X-ray fluorescence spectrometry (SR-XRF), and the resulting time series were used for source apportionment performed with the Multilinear-Engine 2 (ME-2) implementation of the Positive Matrix Factorization algorithm. The preliminary computations yielded 5 factors for Beijing, namely road dust, sea salt, traffic-related, industrial, coal combustion. For Xi'an an additional desert dust factor was found. Further refinement could be expected from including the smaller size fractions, e.g. a sulfur-rich factor for secondary sulfate or a reacted chlorine factor in the fine mode fraction.

  1. Histology, composition, and quality traits of chicken Pectoralis major muscle affected by wooden breast abnormality.

    Science.gov (United States)

    Soglia, F; Mudalal, S; Babini, E; Di Nunzio, M; Mazzoni, M; Sirri, F; Cavani, C; Petracci, M

    2016-03-01

    Only a few years ago, the poultry industry began to face a recent abnormality in breast meat, known as wooden breast, which frequently overlaps with white striping. This study aimed to assess the impact of wooden breast abnormality on quality traits of meat. For this purpose, 32 normal (NRM), 32 wooden (WB), and 32 wooden and white-striped (WB/WS) Pectoralis major muscles were selected from the same flock of heavy broilers (males, Ross 708, weighing around 3.7 kg) in the deboning area of a commercial processing plant at 3 h postmortem and used to assess histology, proximate (moisture, protein, fat, ash, and collagen) and mineral composition (Mg, K, P, Na and Ca), sarcoplasmic and myofibrillar protein patterns, and technological traits of breast meat. Compared to the normal group, WB/WS fillets showed more severe histological lesions characterized by fiber degeneration, fibrosis, and lipidosis, coupled with a significantly harder texture. With regard to proximate and mineral composition, abnormal samples exhibited significantly (P < 0.001) higher moisture, fat, and collagen contents coupled with lower (P < 0.001) amounts of protein and ash. Furthermore, increased calcium (131 vs. 84 mg kg(-1); P < 0.05) and sodium (741 vs. 393 mg kg(-1); P < 0.001) levels were found in WB/WS meat samples. The SDS-PAGE analysis revealed a significantly lower amount of calcium-ATPase (SERCA, 114 kDa), responsible for the translocation of Ca ions across the membrane, in normal breasts compared to abnormal ones. As for meat quality traits, fillets affected by wooden abnormality exhibited significantly (P < 0.001) higher ultimate pH and lower water-holding/water-binding capacity. In particular, compared to normal, abnormal samples showed reduced marinade uptake coupled with increased drip loss and cooking losses as well. In conclusion, this study revealed that meat affected by wooden breast or both wooden breast and white striping abnormalities exhibit poorer nutritional value, harder

  2. Finite Element Analysis of Composite Hardened Walls Subjected to Blast Loads

    Directory of Open Access Journals (Sweden)

    Girum S. Urgessa

    2009-01-01

    Full Text Available Problem statement: There is currently no standard design guideline to determine the number of composites needed to retrofit masonry walls in order to withstand a given explosion. Past design approaches were mainly based on simplified single-degree-of-freedom analysis. A finite element analysis was conducted for concrete masonry walls hardened with composites and subjected to short duration blast loads. Approach: The analysis focused on displacement time history responses which form the basis for retrofit design guidelines against blast loadings. The blast was determined from 0.5 kg equivalent TNT explosive at 1.83 m stand-off distance to simulate small mailroom bombs. Two and four layered retrofitted walls were investigated. Uncertainties in the finite model analysis of walls such as pressure distributions, effect of mid height explosive bursts versus near the ground explosive bursts and variations in modulus of elasticity of the wall were presented. Results: Uniformly distributed blast loads over the retrofitted wall height produced a small difference in peak displacement results when compared to the non-uniform pressure distribution. Ground explosive burst was shown to produce a 62.7% increase in energy and a higher peak displacement response when compared to mid-height explosive burst. Conclusion: The parametric study on the variation of modulus of elasticity of concrete masonry showed no significant effect on peak displacement affirming the use of the resistance deflection contribution of the composite in retrofit designs.

  3. Fast multipole boundary element analysis of 2D viscoelastic composites with imperfect interfaces

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    A fast multipole boundary element method(FMBEM)is developed for the analysis of 2D linear viscoelastic composites with imperfect viscoelastic interfaces.The transformed fast multipole formulations are established using the time domain method. To simulate the viscoelastic behavior of imperfect interfaces that are frequently encountered in practice,the Kelvin type model is introduced.The FMBEM is further improved by incorporating naturally the interaction among inclusions as well as eliminating the phenomenon of material penetration.Since all the integrals are evaluated analytically,high accuracy and fast convergence of the numerical scheme are obtained.Several numerical examples,including planar viscoelastic composites with a single inclusion or randomly distributed multi-inclusions are presented.The numerical results are compared with the developed analytical solutions,which illustrates that the proposed FMBEM is very efficient in determining the macroscopic viscoelastic behavior of the particle-reinforced composites with the presence of imperfect interfaces.The laboratory measurements of the mixture creep compliance of asphalt concrete are also compared with the prediction by the developed model.

  4. Finite element modeling of guided wave scattering at delaminations in composite panels

    Science.gov (United States)

    Murat, B. I. S.; Fromme, P.

    2016-04-01

    Carbon fiber laminate composites, consisting of layers of polymer matrix reinforced with high strength carbon fibers, are increasingly employed for aerospace structures. They offer advantages for aerospace applications, e.g., good strength to weight ratio. However, impact during the operation and servicing of the aircraft can lead to barely visible and difficult to detect damage. Depending on the severity of the impact, delaminations can occur, reducing the load carrying capacity of the structure. Efficient structural health monitoring of composite panels can be achieved using guided ultrasonic waves propagating along the structure. The guided ultrasonic wave (A0 Lamb wave mode) scattering at delaminations was modelled using full three-dimensional Finite Element (FE) simulations. The influence of the delamination size was systematically investigated from a parameter study. The angular dependency of the scattered guided wave amplitude was calculated using a baseline subtraction method. A significant influence of the delamination width on the guided wave scattering was found. The sensitivity of guided waves for the detection of barely visible impact damage in composite panels has been predicted.

  5. Finite Element Analysis of Interfacial Debonding in Copper/Diamond Composites for Thermal Management Applications.

    Science.gov (United States)

    Zain-Ul-Abdein, Muhammad; Ijaz, Hassan; Saleem, Waqas; Raza, Kabeer; Mahfouz, Abdullah Salmeen Bin; Mabrouki, Tarek

    2017-07-02

    Copper/diamond (Cu/D) composites are famous in thermal management applications for their high thermal conductivity values. They, however, offer some interface related problems like high thermal boundary resistance and excessive debonding. This paper investigates interfacial debonding in Cu/D composites subjected to steady-state and transient thermal cyclic loading. A micro-scale finite element (FE) model was developed from a SEM image of the Cu/20 vol % D composite sample. Several test cases were assumed with respect to the direction of heat flow and the boundary interactions between Cu/uncoated diamonds and Cu/Cr-coated diamonds. It was observed that the debonding behavior varied as a result of the differences in the coefficients of thermal expansions (CTEs) among Cu, diamond, and Cr. Moreover, the separation of interfaces had a direct influence upon the equivalent stress state of the Cu-matrix, since diamond particles only deformed elastically. It was revealed through a fully coupled thermo-mechanical FE analysis that repeated heating and cooling cycles resulted in an extremely high stress state within the Cu-matrix along the diamond interface. Since these stresses lead to interfacial debonding, their computation through numerical means may help in determining the service life of heat sinks for a given application beforehand.

  6. Numerical simulation of isothermal chemical vapor infiltration process in fabrication of carbon-carbon composites by finite element method

    Institute of Scientific and Technical Information of China (English)

    李克智; 李贺军; 姜开宇

    2000-01-01

    The chemical vapor infiltration process in fabrication of carbon-carbon composites is highly inefficient and requires long processing time. These limitations add considerably to the cost of fabrication and restrict the application of this material. Efforts have been made to study the CVI process in fabrication of carbon-carbon composites by computer simulation and predict the process parameters, density, porosity, etc. According to the characteristics of CVI process, the basic principle of FEM and mass transport, the finite element model has been established. Incremental finite element equations and the elemental stiffness matrices have been derived for the first time. The finite element program developed by the authors has been used to simulate the ICVI process in fabrication of carbon-carbon composites. Computer color display of simulated results can express the densification and distributions of density and porosity in preform clearly. The influence of process parameters on the densification of prefo

  7. Wave Propagation Analysis in Composite Laminates Containing a Delamination Using a Three-Dimensional Spectral Element Method

    Directory of Open Access Journals (Sweden)

    Fucai Li

    2012-01-01

    Full Text Available A three-dimensional spectral element method (SEM was developed for analysis of Lamb wave propagation in composite laminates containing a delamination. SEM is more efficient in simulating wave propagation in structures than conventional finite element method (FEM because of its unique diagonal form of the mass matrix. Three types of composite laminates, namely, unidirectional-ply laminates, cross-ply laminates, and angle-ply laminates are modeled using three-dimensional spectral finite elements. Wave propagation characteristics in intact composite laminates are investigated, and the effectiveness of the method is validated by comparison of the simulation results with analytical solutions based on transfer matrix method. Different Lamb wave mode interactions with delamination are evaluated, and it is demonstrated that symmetric Lamb wave mode may be insensitive to delamination at certain interfaces of laminates while the antisymmetric mode is more suited for identification of delamination in composite structures.

  8. Elemental composition of airborne dust in the shale shaker house during an offshore drilling operation

    DEFF Research Database (Denmark)

    Hansen, A.B.; Larsen, E.; Hansen, L.V.

    1991-01-01

    During 2 days of an offshore drilling operation in the North Sea, 16 airborne dust samples from the atmosphere of the Shale Shaker House were collected onto filters. During this operation, drilling mud composed of a water slurry of barite (BaSO4) together with minor amounts of additives, among them...... coupled plasma-mass spectrometry). The total amount of dust collected varied from 0.04 to 1.41 mg m-3 with barium (Ba) as the single most abundant element. The open shale shakers turned out to be the major cause of generation of dust from the solid components of the drilling mud....

  9. Novel Repair Concept for Composite Materials by Repetitive Geometrical Interlock Elements

    Directory of Open Access Journals (Sweden)

    David Zaremba

    2011-12-01

    Full Text Available Material adapted repair technologies for fiber-reinforced polymers with thermosetting matrix systems are currently characterized by requiring major efforts for repair preparation and accomplishment in all industrial areas of application. In order to allow for a uniform distribution of material and geometrical parameters over the repair zone, a novel composite interlock repair concept is introduced, which is based on a repair zone with undercuts prepared by water-jet technology. The presented numerical and experimental sensitivity analyses make a contribution to the systematic development of the interlock repair technology with respect to material and geometrical factors of influence. The results show the ability of the novel concept for a reproducible and automatable composite repair.

  10. A First Assessment of the Elemental Composition of Atmospheric Aerosols in the Canadian Oil Sands Region

    Directory of Open Access Journals (Sweden)

    Dabek-Zlotorzynska E.

    2013-04-01

    Full Text Available Canadian Oil Sands, which comprise 97% of Canada’s 176 billion barrels of proven oil reserves, are located beneath 140,200 km2 of boreal forests, prairies and wetlands, and are the second largest known deposit of crude oil in the world. As such, this region has experienced rapid industrial development, which resulted also in increasing industrial air emissions, primarily from bitumen upgrading and mine vehicle fleet operations. This rapid development has led to concerns regarding health risk to humans, and other terrestrial and aquatic wildlife associated with exposure to toxic contaminants, especially metals and polycyclic aromatic compounds (PACs particularly along the Athabasca River and its watershed. Canada’s Minister of the Environment announced that Environment Canada (EC will jointly lead, in collaboration with Government of Alberta and relevant stakeholders, the development and implementation of an enhanced monitoring system in the Oil Sands region to provide information on the state of the air, water, land andbiodiversity. This work presents preliminary data on the first assessment of elemental composition of fine particulate matter (particles<2.5 mm in diameter; PM2.5 at 3 air quality sites in close proximity to Oil Sands processing activities. Since December 2010, integrated 24 hour air samples were collected every sixth day on a 47-mm Teflon filters using Thermo Fisher Partisol 2000-FRM samplers operated by the National Air Pollution Surveillance (NAPS network that involves EC and the Canadian provinces and territories. All samples including laboratory, travel and field blanks were subjected to gravimetric determination of PM2.5 mass and energy dispersive X-ray fluorescence (ED-XRF analysis for 46 elements. Since ED-XRF is a non-destructive technique, PM2.5 samples were subsequently analyzed for 37 trace elements including rare earth elements using inductively-coupled plasma mass spectrometry (ICP-MS combined with microwave

  11. On the composite response of the MLT to major sudden stratospheric warming events with elevated stratopause

    Science.gov (United States)

    Limpasuvan, Varavut; Orsolini, Yvan J.; Chandran, Amal; Garcia, Rolando R.; Smith, Anne K.

    2016-05-01

    Based on a climate-chemistry model (constrained by reanalyses below ~50 km), the zonal-mean composite response of the mesosphere and lower thermosphere (MLT) to major sudden stratospheric warming events with elevated stratopauses demonstrates the role of planetary waves (PWs) in driving the mean circulation in the presence of gravity waves (GWs), helping the polar vortex recover and communicating the sudden stratospheric warming (SSW) impact across the equator. With the SSW onset, strong westward PW drag appears above 80 km primarily from the dissipation of wave number 1 perturbations with westward period of 5-12 days, generated from below by the unstable westward polar stratospheric jet that develops as a result of the SSW. The filtering effect of this jet also allows eastward propagating GWs to saturate in the winter MLT, providing eastward drag that promotes winter polar mesospheric cooling. The dominant PW forcing translates to a net westward drag above the eastward mesospheric jet, which initiates downwelling over the winter pole. As the eastward polar stratospheric jet returns, this westward PW drag persists above 80 km and acts synergistically with the return of westward GW drag to drive a stronger polar downwelling that warms the pole adiabatically and helps reform the stratopause at an elevated altitude. With the polar wind reversal during the SSW onset, the westward drag by the quasi-stationary PW in the winter stratosphere drives an anomalous equatorial upwelling and cooling that enhance tropical stratospheric ozone. Along with equatorial wind anomalies, this ozone enhancement subsequently amplifies the migrating semidiurnal tide amplitude in the winter midlatitudes.

  12. Major Histocompatibility Complex class IIb polymorphism influences gut microbiota composition and diversity.

    Science.gov (United States)

    Bolnick, Daniel I; Snowberg, Lisa K; Caporaso, J Gregory; Lauber, Chris; Knight, Rob; Stutz, William E

    2014-10-01

    Animals harbour diverse communities of symbiotic bacteria, which differ dramatically among host individuals. This heterogeneity poses an immunological challenge: distinguishing between mutualistic and pathogenic members of diverse and host-specific microbial communities. We propose that Major Histocompatibility class II (MHC) genotypes contribute to recognition and regulation of gut microbes, and thus, MHC polymorphism contributes to microbial variation among hosts. Here, we show that MHC IIb polymorphism is associated with among-individual variation in gut microbiota within a single wild vertebrate population of a small fish, the threespine stickleback. We sampled stickleback from Cedar Lake, on Vancouver Island, and used next-generation sequencing to genotype the sticklebacks' gut microbiota (16S sequencing) and their MHC class IIb exon 2 sequences. The presence of certain MHC motifs was associated with altered relative abundance (increase or decrease) of some microbial Families. The effect sizes are modest and entail a minority of microbial taxa, but these results represent the first indication that MHC genotype may affect gut microbiota composition in natural populations (MHC-microbe associations have also been found in a few studies of lab mice). Surprisingly, these MHC effects were frequently sex-dependent. Finally, hosts with more diverse MHC motifs had less diverse gut microbiota. One implication is that MHC might influence the efficacy of therapeutic strategies to treat dysbiosis-associated disease, including the outcome of microbial transplants between healthy and diseased patients. We also speculate that macroparasite-driven selection on MHC has the potential to indirectly alter the host gut microbiota, and vice versa.

  13. An Empirical Examination of the Composition of Vocational Interest in Business Colleges: MIS vs. Other Majors

    Science.gov (United States)

    Downey, James

    2011-01-01

    Given the diminishing number of Management Information Systems (MIS) majors, an understanding of the factors which influence student choice of major is crucial. It has been noted in many previous studies that interest in a major and career significantly influences the student's choice of college major; indeed, in most studies, it is the strongest…

  14. Mass, black carbon and elemental composition of PM{sub 2.5} at an industrial site in Kingston, Jamaica

    Energy Technology Data Exchange (ETDEWEB)

    Boman, Johan, E-mail: johan.boman@chem.gu.se; Gaita, Samuel M.

    2015-11-15

    An estimated three million premature deaths yearly can be attributed to ambient particulate pollution, a majority of them in low and middle income countries. The rapid increase in the vehicle fleet in urban areas of the Caribbean countries have experienced contributes to the bad urban air quality. In this study aerosol particles with an aerodynamic diameter smaller than, or equal to, 2.5 μm (PM{sub 2.5}) were collected over 24 h at a site along Spanish Town Road, one of the main commuter roads in Kingston, Jamaica. The study was aimed at determining the mass, black carbon and elemental composition of PM{sub 2.5} in Kingston. Although lead in the gasoline was phased out in the year 2000, up to 5000 ppm of sulfur is still allowed in the diesel, leading to an extensive secondary particle formation. PM{sub 2.5} samples were collected using a Mini-vol sampler between 12 December 2013 and 21 March 2014 and analyzed for trace elements using the Particle-Induced X-ray Emission (PIXE) facility at Lund University, Sweden. Concentrations of Si, S, Cl, K, Ca, Ti, V, Cr, Fe, Ni, Cu, Zn, Br and Pb were determined. Elemental concentrations showed a high temporal variation and the average PM{sub 2.5} concentration (44 μg m{sup −3}) is higher than the air quality standards that apply in the European Union (25 μg m{sup −3}) and in the USA (12 μg m{sup −3}). From this we can conclude that the air quality in the area is severely influenced by PM{sub 2.5} pollution and that there is a need to develop plans for improving the air quality in Kingston city.

  15. Assessment of elemental composition, microstructure, and hardness of stainless steel endodontic files and reamers.

    Science.gov (United States)

    Darabara, Myrsini; Bourithis, Lefteris; Zinelis, Spiros; Papadimitriou, George D

    2004-07-01

    The purpose of this study was to determine the elemental composition, microstructure, and hardness of commercially available reamers, K files, and H files. Five instruments of each type from different manufacturers (Antaeos, FKG, Maillefer, Mani, and Micromega) were embedded in epoxy resin along their longitudinal axis. After metallographic grinding and polishing, the specimens were chemically etched and their microstructure investigated under an incident light microscope. The specimens were studied under a scanning electron microscope, and their elemental compositions were determined by energy dispersive X-ray microanalysis. The same surfaces were repolished and X-ray diffraction was performed. The same specimen surface was used for the assessment of the Vickers hardness (HV200) by using a microhardness tester with a 200-g load and 20-s contact time. The hardness results were statistically analyzed with two-way ANOVA and Tukey's test (a = 0.05). All files demonstrated extensively elongated grains parallel to longitudinal file axis because of cold drawing. The elemental composition of Maillefer and Mani reamers, Antaeos K files, and Mani H files were found in the range of AISI 303 SS, whereas all the rest were determined as AISI 304 SS. Two different phases (austenite SSt and martensite SSt) were identified with X-ray diffraction for all files tested. The results of hardness classified reamers in the following decreasing order (HMV200): Micromega = 673 +/- 29, Mani = 662 +/- 24, Maillefer = 601 +/- 34, Antaeos = 586 +/- 18, FKG = 557 +/- 19, and the K files (HV200): FKG = 673 +/- 16, Mani = 647 +/- 19, Maillefer = 603 +/- 41, Antaeos = 566 +/- 21, Micromega = 555 +/- 15, and the H files (HMV200): Mani = 640 +/- 12, FKG = 583 +/- 31, Maillefer = 581 +/- 5, Antaeos = 573 +/- 3, Micromega = 546 +/- 14. Although only two stainless steel alloys were used for the production of endodontic files, the differences in hardness are independent to the alloys used, implying that

  16. Carbon elemental and isotopic composition in mantle xenoliths from Spain: Insights on sources and petrogenetic processes

    Science.gov (United States)

    Bianchini, G.; Natali, C.

    2017-02-01

    The carbon elemental concentration (C wt%) and isotopic (δ13C ‰) composition of mantle xenoliths from the Tallante and Calatrava volcanic occurrences (in South-East and Central Spain, respectively) have been investigated to identify carbon sources and processes occurring in distinct geodynamic settings of the Iberian Peninsula. The peridotitic mantle xenoliths from Calatrava show elemental C ranging from 0.11 to 2.87 wt% which is coupled with a continuous isotopic variation from very negative values (δ13C - 26.1‰) to typical mantle values (δ13C - 5.9‰). On the other hand, the Tallante mantle xenolith suite displays lower C contents (0.06-0.15 wt%) showing a tighter variation with 13C-depleted values ranging between - 20.1 and - 23.7‰; higher elemental C up to 0.41 wt% displaying distinctly less negative isotopic values (δ13C between - 13.8 and - 11.9‰) have been recorded in veins crosscutting Tallante peridotites, plausibly representing the product of metasomatic reactions. The data from the two investigated xenolith suites invariably display a good correlation between elemental and isotopic composition, suggesting a mantle origin for carbon and Rayleigh-type fractionation as the process responsible for the observed C-δ13C variation. However, the correlation between the carbon isotopic data with other isotopic tracers (e.g. 87Sr/86Sr, 3He/4He) used to identify distinct mantle components and metasomatic reactions, indicates systematic differences between the two xenolith suites suggesting that beneath the Betic Cordillera (where Tallante is located) the deep C-cycle involves recycling, via subduction preceding/accompanying continental collision, of crustal components back in the mantle. Coherently, geochemical trends observed in the Tallante xenoliths seem to be influenced by metasomatic agents generated by melting of crustal lithologies that according to the analysis of a metasedimentary xenolith can contain C up to 1.2 wt% having δ13C of ca. - 18

  17. VIBRATION ANALYSIS ON A COMPOSITE BEAM TO IDENTIFY DAMAGE AND DAMAGE SEVERITY USING FINITE ELEMENT METHOD

    Directory of Open Access Journals (Sweden)

    E.V.V.Ramanamurthy

    2011-07-01

    Full Text Available The objective of this paper is to develop a damage detection method in a composite cantilever beam with an edge crack has been studied using finite element method. A number of analytical, numerical andexperimental techniques are available for the study of damage identification in beams. Studies were carried out for three different types of analysis on a composite cantilever beam with an edge crack as damage. The material used in this analysis is glass-epoxy composite material. The finite element formulation was carried out in the analysis section of the package, known as ANSYS. The types of vibration analysis studied on a composite beam are Modal, Harmonic andTransient analysis. The crack is modeled such that the cantilever beam is replaced with two intact beams with the crack as additional boundary condition. Damage algorithms are used to identify and locate the damage. Damage index method is also used to find the severity of the damage. The results obtained from modal analysis were compared with the transient analysis results.The vibration-based damage detection methods are based on the fact that changes of physical properties (stiffness, mass and damping due to damage will manifest themselves as changes in the structural modal parameters (natural frequencies, mode shapes and modal damping. The task is then to monitor the selected indicators derived from modal parameters to distinguish between undamaged and damaged states. However, the quantitative changes of global modal parameters are not sufficiently sensitive to a local damage. The proposed approach, on the other hand, interprets the dynamic changes caused by damage in a different way. Although the basis for vibration-based damage detection appears intuitive, the implementation in real structures may encounter many significant challenges. The most fundamental issue is the fact that damage typically is a local phenomenon and may not dramatically influence the global dynamic response of a

  18. Surgical team composition has a major impact on effectiveness and costs in laparoscopic donor nephrectomy

    NARCIS (Netherlands)

    Özdemir-van Brunschot, D.M.D.; Warle, M.C.; Jagt, M.F.P. van der; Grutters, J.P.C.; Horne, S.B. van; Kloke, H.J.; Vliet, J.A. van der; Langenhuijsen, J.F.; D'Ancona, F.C.H.

    2015-01-01

    PURPOSE: Limited evidence exists that optimization of surgical team composition may improve effectiveness of laparoscopic donor nephrectomy (LDN). METHODS: A retrospective cohort study with 541 consecutive LDNs. From 2003 to 2012, surgical team composition was gradually optimized with regard to the

  19. Comparison of univariate and multivariate models for prediction of major and minor elements from laser-induced breakdown spectra with and without masking

    Science.gov (United States)

    Dyar, M. Darby; Fassett, Caleb I.; Giguere, Stephen; Lepore, Kate; Byrne, Sarah; Boucher, Thomas; Carey, CJ; Mahadevan, Sridhar

    2016-09-01

    This study uses 1356 spectra from 452 geologically-diverse samples, the largest suite of LIBS rock spectra ever assembled, to compare the accuracy of elemental predictions in models that use only spectral regions thought to contain peaks arising from the element of interest versus those that use information in the entire spectrum. Results show that for the elements Si, Al, Ti, Fe, Mg, Ca, Na, K, Ni, Mn, Cr, Co, and Zn, univariate predictions based on single emission lines are by far the least accurate, no matter how carefully the region of channels/wavelengths is chosen and despite the prominence of the selected emission lines. An automated iterative algorithm was developed to sweep through all 5485 channels of data and select the single region that produces the optimal prediction accuracy for each element using univariate analysis. For the eight major elements, use of this technique results in a 35% improvement in prediction accuracy; for minors, the improvement is 13%. The best wavelength region choice for any given univariate analysis is likely to be an inherent property of the specific training set that cannot be generalized. In comparison, multivariate analysis using partial least-squares (PLS) almost universally outperforms univariate analysis. PLS using all the same wavelength regions from the univariate analysis produces results that improve in accuracy by 63% for major elements and 3% for minor element. This difference is likely a reflection of signal to noise ratios, which are far better for major elements than for minor elements, and likely limit their prediction accuracy by any technique. We also compare predictions using specific wavelength ranges for each element against those employing all channels. Masking out channels to focus on emission lines from a specific element that occurs decreases prediction accuracy for major elements but is useful for minor elements with low signals and proportionally much higher noise; use of PLS rather than univariate

  20. Mapping of a Leishmania major gene/locus that confers pentamidine resistance by deletion and insertion of transposable element

    Directory of Open Access Journals (Sweden)

    Coelho Adriano C.

    2004-01-01

    Full Text Available Pentamidine (PEN is an alternative compound to treat antimony-resistant leishmaniasis patients, which cellular target remains unclear. One approach to the identification of prospective targets is to identify genes able to mediate PEN resistance following overexpression. Starting from a genomic library of transfected parasites bearing a multicopy episomal cosmid vector containing wild-type Leishmania major DNA, we isolated one locus capable to render PEN resistance to wild type cells after DNA transfection. In order to map this Leishmania locus, cosmid insert was deleted by two successive sets of partial digestion with restriction enzymes, followed by transfection into wild type cells, overexpression, induction and functional tests in the presence of PEN. To determine the Leishmania gene related to PEN resistance, nucleotide sequencing experiments were done through insertion of the transposon Mariner element of Drosophila melanogaster (mosK into the deleted insert to work as primer island. Using general molecular techniques, we described here this method that permits a quickly identification of a functional gene facilitating nucleotide sequence experiments from large DNA fragments. Followed experiments revealed the presence of a P-Glycoprotein gene in this locus which role in Leishmania metabolism has now been analyzed.

  1. Trace elemental composition of curry by inductively coupled plasma optical emission spectrometry (ICP-OES).

    Science.gov (United States)

    Gonzálvez, A; Armenta, S; De La Guardia, M

    2008-01-01

    A methodology based on inductively coupled plasma optical emission spectrometry (ICP-OES) after microwave-assisted acid digestion was developed to determine the content of traces elements in curry samples from the Spanish market. The methodology was validated in terms of accuracy by the analysis of citrus and tomato leaf reference materials achieving comparable results with the certified values. The trace metal content of curry samples was compared with data available from previously published reports concerning Indian samples, especially in terms of heavy metal composition, in order to guarantee the quality of the commercially available spices in the European countries. Values found for the analysis of arsenic, lead and cadmium were significantly lower than the maximum limit allowed by European Union statutory limits for heavy metals and lower than those obtained for Indian curry leaves reported by Indian research teams by using neutron activation and γ-ray analysis.

  2. Homotopy Iteration Algorithm for Crack Parameters Identification with Composite Element Method

    Directory of Open Access Journals (Sweden)

    Ling Huang

    2013-01-01

    Full Text Available An approach based on homotopy iteration algorithm is proposed to identify the crack parameters in beam structures. In the forward problem, a fully open crack model with the composite element method is employed for the vibration analysis. The dynamic responses of the cracked beam in time domain are obtained from the Newmark direct integration method. In the inverse analysis, an identification approach based on homotopy iteration algorithm is studied to identify the location and the depth of a cracked beam. The identification equation is derived by minimizing the error between the calculated acceleration response and the simulated measured one. Newton iterative method with the homotopy equation is employed to track the correct path and improve the convergence of the crack parameters. Two numerical examples are conducted to illustrate the correctness and efficiency of the proposed method. And the effects of the influencing parameters, such as measurement time duration, measurement points, division of the homotopy parameter and measurement noise, are studied.

  3. The maternal-effect, selfish genetic element Medea is associated with a composite Tc1 transposon.

    Science.gov (United States)

    Lorenzen, Marcé D; Gnirke, Andreas; Margolis, Jonathan; Garnes, Jeffrey; Campbell, Margie; Stuart, Jeffrey J; Aggarwal, Rajat; Richards, Stephen; Park, Yoonseong; Beeman, Richard W

    2008-07-22

    Maternal-Effect Dominant Embryonic Arrest ("Medea") factors are selfish nuclear elements that combine maternal-lethal and zygotic-rescue activities to gain a postzygotic survival advantage. We show that Medea(1) activity in Tribolium castaneum is associated with a composite Tc1 transposon inserted just downstream of the neurotransmitter reuptake symporter bloated tubules (blot), whose Drosophila ortholog has both maternal and zygotic functions. The 21.5-kb insertion contains defective copies of elongation initiation factor-3, ATP synthase subunit C, and an RNaseD-related gene, as well as a potentially intact copy of a prokaryotic DUF1703 gene. Sequence comparisons suggest that the current distribution of Medea(1) reflects global emanation after a single transpositional event in recent evolutionary time. The Medea system in Tribolium represents an unusual type of intragenomic conflict and could provide a useful vehicle for driving desirable genes into populations.

  4. Seasonal variability of total dissolved fluxes and origin of major dissolved elements within a large tropical river: The Orinoco, Venezuela

    Science.gov (United States)

    Laraque, Alain; Moquet, Jean-Sébastien; Alkattan, Rana; Steiger, Johannes; Mora, Abrahan; Adèle, Georges; Castellanos, Bartolo; Lagane, Christèle; Lopez, José Luis; Perez, Jesus; Rodriguez, Militza; Rosales, Judith

    2013-07-01

    Seasonal variations of total dissolved fluxes of the lower Orinoco River were calculated taking into account four complete hydrological cycles during a five-year period (2005-2010). The modern concentrations of total dissolved solids (TDS) of the Orinoco surface waters were compared with data collected during the second half of the last century published in the literature. This comparison leads to the conclusion that chemical composition did not evolve significantly at least over the last thirty to forty years. Surface waters of the Orinoco at Ciudad Bolivar are between bicarbonated calcic and bicarbonated mixed. In comparison to mean values of concentrations of total dissolved solids (TDS) of world river surface waters (89.2 mg l-1), the Orinoco River at Ciudad Bolivar presents mainly low mineralized surface waters (2005-10: TDS 30 mg l-1). The TDS fluxes passing at this station in direction to the Atlantic Ocean between 2005 and 2010 were estimated at 30 × 106 t yr-1, i.e. 36 t km-2 yr-1. It was observed that the seasonal variations (dry season vs wet season) of total dissolved fluxes (TDS and dissolved organic carbon (DOC)) are mainly controlled by discharge variations. Two groups of elements have been defined from dilution curves and molar ratio diagrams. Ca2+, Mg2+, HCO3-, Cl- and Na+ mainly come from the same geographic and lithologic area, the Andes. K+ and SiO2 essentially come from the Llanos and the Guayana Shield. These findings are important for understanding fundamental geochemical processes within the Orinoco River basin, but also as a baseline study in the perspective of the development of numerous mining activities related with aluminum and steel industries; and the plans of the Venezuelan government to construct new fluvial ports on the lower Orinoco for the transport of hydrocarbons.

  5. Modification of a Macromechanical Finite-Element Based Model for Impact Analysis of Triaxially-Braided Composites

    Science.gov (United States)

    Goldberg, Robert K.; Blinzler, Brina J.; Binienda, Wieslaw K.

    2010-01-01

    A macro level finite element-based model has been developed to simulate the mechanical and impact response of triaxially-braided polymer matrix composites. In the analytical model, the triaxial braid architecture is simulated by using four parallel shell elements, each of which is modeled as a laminated composite. For the current analytical approach, each shell element is considered to be a smeared homogeneous material. The commercial transient dynamic finite element code LS-DYNA is used to conduct the simulations, and a continuum damage mechanics model internal to LS-DYNA is used as the material constitutive model. The constitutive model requires stiffness and strength properties of an equivalent unidirectional composite. Simplified micromechanics methods are used to determine the equivalent stiffness properties, and results from coupon level tests on the braided composite are utilized to back out the required strength properties. Simulations of quasi-static coupon tests of several representative braided composites are conducted to demonstrate the correlation of the model. Impact simulations of a represented braided composites are conducted to demonstrate the capability of the model to predict the penetration velocity and damage patterns obtained experimentally.

  6. 17 CFR 1.64 - Composition of various self-regulatory organization governing boards and major disciplinary...

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Composition of various self-regulatory organization governing boards and major disciplinary committees. 1.64 Section 1.64 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE...

  7. Determination of the Mineral Composition and Toxic Element Contents of Propolis by Near Infrared Spectroscopy

    Science.gov (United States)

    González-Martín, M. Inmaculada; Escuredo, Olga; Revilla, Isabel; Vivar-Quintana, Ana M.; Coello, M. Carmen; Palacios Riocerezo, Carlos; Wells Moncada, Guillermo

    2015-01-01

    The potential of near infrared spectroscopy (NIR) with remote reflectance fiber-optic probes for determining the mineral composition of propolis was evaluated. This technology allows direct measurements without prior sample treatment. Ninety one samples of propolis were collected in Chile (Bio-Bio region) and Spain (Castilla-León and Galicia regions). The minerals measured were aluminum, calcium, iron, potassium, magnesium, phosphorus, and some potentially toxic trace elements such as zinc, chromium, nickel, copper and lead. The modified partial least squares (MPLS) regression method was used to develop the NIR calibration model. The determination coefficient (R2) and root mean square error of prediction (RMSEP) obtained for aluminum (0.79, 53), calcium (0.83, 94), iron (0.69, 134) potassium (0.95, 117), magnesium (0.70, 99), phosphorus (0.94, 24) zinc (0.87, 10) chromium (0.48, 0.6) nickel (0.52, 0.7) copper (0.64, 0.9) and lead (0.70, 2) in ppm. The results demonstrated that the capacity for prediction can be considered good for wide ranges of potassium, phosphorus and zinc concentrations, and acceptable for aluminum, calcium, magnesium, iron and lead. This indicated that the NIR method is comparable to chemical methods. The method is of interest in the rapid prediction of potentially toxic elements in propolis before consumption. PMID:26540058

  8. Difference of histology and elemental composition of the cervical enamels among human permanent teeth

    Institute of Scientific and Technical Information of China (English)

    Masashi TAKAHASHI; Shin-Ichi GOTO; Kazuhisa MORI; Izumi MATAGA

    2008-01-01

    The purpose of this study is to clarify the dif-ference of histology and elemental composition of the cer-vical enamels among the human permanent teeth. The re-ground surfaces at the cervical enamels of them were observed under scanning electron microscopy (SEM). The contents of seven elements were analyzed quantita-tively with electron probe microanalyzer (EPMA). The widths of the rod sections at the cervical enamels were larger than those at the cuspal enamels. The rod sections at the mesial cervical enamels in the incisors were more obscure and more decayed by acid solution than those in the premolars and molars. The calcium and phosphorus contents of the cervical enamels were significantly lower than those of the cuspal enamels. The carbon content of the cervical enamels was significantly higher than that of the cuspal enamels. The calcium and phosphorus contents of the cervical enamels were the significantly highest in the premolars. The carbon and sodium contents of the cer-vical enamels were significantly highest in the premolars. It is thought that the calcification level is lower, while the content of organic matter is higher at the cervical enamels than those at the cuspal enamels. It is considered that the sodium causes high calcification.

  9. Determination of the Mineral Composition and Toxic Element Contents of Propolis by Near Infrared Spectroscopy

    Directory of Open Access Journals (Sweden)

    M. Inmaculada González-Martín

    2015-11-01

    Full Text Available The potential of near infrared spectroscopy (NIR with remote reflectance fiber-optic probes for determining the mineral composition of propolis was evaluated. This technology allows direct measurements without prior sample treatment. Ninety one samples of propolis were collected in Chile (Bio-Bio region and Spain (Castilla-León and Galicia regions. The minerals measured were aluminum, calcium, iron, potassium, magnesium, phosphorus, and some potentially toxic trace elements such as zinc, chromium, nickel, copper and lead. The modified partial least squares (MPLS regression method was used to develop the NIR calibration model. The determination coefficient (R2 and root mean square error of prediction (RMSEP obtained for aluminum (0.79, 53, calcium (0.83, 94, iron (0.69, 134 potassium (0.95, 117, magnesium (0.70, 99, phosphorus (0.94, 24 zinc (0.87, 10 chromium (0.48, 0.6 nickel (0.52, 0.7 copper (0.64, 0.9 and lead (0.70, 2 in ppm. The results demonstrated that the capacity for prediction can be considered good for wide ranges of potassium, phosphorus and zinc concentrations, and acceptable for aluminum, calcium, magnesium, iron and lead. This indicated that the NIR method is comparable to chemical methods. The method is of interest in the rapid prediction of potentially toxic elements in propolis before consumption.

  10. Sterol regulatory element binding transcription factor 1 (SREBF1) polymorphism and milk fatty acid composition.

    Science.gov (United States)

    Nafikov, R A; Schoonmaker, J P; Korn, K T; Noack, K; Garrick, D J; Koehler, K J; Minick-Bormann, J; Reecy, J M; Spurlock, D E; Beitz, D C

    2013-04-01

    Milk is known to contain high concentrations of saturated fatty acids-such as palmitic (16:0), myristic (14:0), and lauric (12:0) acids-that can raise plasma cholesterol in humans, making their presence in milk undesirable. The main objective of our candidate gene study was to develop genetic markers that can be used to improve the healthfulness of bovine milk. The sterol regulatory element binding transcription factor 1 (SREBF1) known to regulate the transcription of lipogenic genes together with SREBF chaperone and insulin induced gene 1 were the candidate genes. The results showed significant association of the overall SREBF1 haplotypes with milk production and variations in lauric (12:0) and myristic (14:0) acid concentrations in milk. Haplotype H1 of SREBF1 was the most desirable to improve milk healthfulness because it was significantly associated with lower lauric (12:0) and myristic (14:0) acid concentrations compared with haplotype H3 of SREBF1, and lower lauric acid (12:0) concentration compared with haplotype H2 of SREBF1. Haplotype H1 of SREBF1, however, was significantly associated with lower milk production compared with haplotype H3 of SREBF1. We did not detect any significant associations between genetic polymorphisms in insulin induced gene 1 (INSIG1) and SREBF chaperone and milk fatty acid composition. In conclusion, genetic polymorphisms in SREBF1 can be used to develop genetic tools for the selection of animals producing milk with healthier fatty acid composition.

  11. Elemental composition and clustering behaviour of α-pinene oxidation products for different oxidation conditions

    Science.gov (United States)

    Praplan, A. P.; Schobesberger, S.; Bianchi, F.; Rissanen, M. P.; Ehn, M.; Jokinen, T.; Junninen, H.; Adamov, A.; Amorim, A.; Dommen, J.; Duplissy, J.; Hakala, J.; Hansel, A.; Heinritzi, M.; Kangasluoma, J.; Kirkby, J.; Krapf, M.; Kürten, A.; Lehtipalo, K.; Riccobono, F.; Rondo, L.; Sarnela, N.; Simon, M.; Tomé, A.; Tröstl, J.; Winkler, P. M.; Williamson, C.; Ye, P.; Curtius, J.; Baltensperger, U.; Donahue, N. M.; Kulmala, M.; Worsnop, D. R.

    2015-04-01

    This study presents the difference between oxidised organic compounds formed by α-pinene oxidation under various conditions in the CLOUD environmental chamber: (1) pure ozonolysis (in the presence of hydrogen as hydroxyl radical (OH) scavenger) and (2) OH oxidation (initiated by nitrous acid (HONO) photolysis by ultraviolet light) in the absence of ozone. We discuss results from three Atmospheric Pressure interface Time-of-Flight (APi-TOF) mass spectrometers measuring simultaneously the composition of naturally charged as well as neutral species (via chemical ionisation with nitrate). Natural chemical ionisation takes place in the CLOUD chamber and organic oxidised compounds form clusters with nitrate, bisulfate, bisulfate/sulfuric acid clusters, ammonium, and dimethylaminium, or get protonated. The results from this study show that this process is selective for various oxidised organic compounds with low molar mass and ions, so that in order to obtain a comprehensive picture of the elemental composition of oxidation products and their clustering behaviour, several instruments must be used. We compare oxidation products containing 10 and 20 carbon atoms and show that highly oxidised organic compounds are formed in the early stages of the oxidation.

  12. Elemental composition and clustering behaviour of α-pinene oxidation products for different oxidation conditions

    Directory of Open Access Journals (Sweden)

    A. P. Praplan

    2015-04-01

    Full Text Available This study presents the difference between oxidised organic compounds formed by α-pinene oxidation under various conditions in the CLOUD environmental chamber: (1 pure ozonolysis (in the presence of hydrogen as hydroxyl radical (OH scavenger and (2 OH oxidation (initiated by nitrous acid (HONO photolysis by ultraviolet light in the absence of ozone. We discuss results from three Atmospheric Pressure interface Time-of-Flight (APi-TOF mass spectrometers measuring simultaneously the composition of naturally charged as well as neutral species (via chemical ionisation with nitrate. Natural chemical ionisation takes place in the CLOUD chamber and organic oxidised compounds form clusters with nitrate, bisulfate, bisulfate/sulfuric acid clusters, ammonium, and dimethylaminium, or get protonated. The results from this study show that this process is selective for various oxidised organic compounds with low molar mass and ions, so that in order to obtain a comprehensive picture of the elemental composition of oxidation products and their clustering behaviour, several instruments must be used. We compare oxidation products containing 10 and 20 carbon atoms and show that highly oxidised organic compounds are formed in the early stages of the oxidation.

  13. Compositional modeling of three-phase flow with gravity using higher-order finite element methods

    Science.gov (United States)

    Moortgat, Joachim; Sun, Shuyu; Firoozabadi, Abbas

    2011-05-01

    A wide range of applications in subsurface flow involve water, a nonaqueous phase liquid (NAPL) or oil, and a gas phase, such as air or CO2. The numerical simulation of such processes is computationally challenging and requires accurate compositional modeling of three-phase flow in porous media. In this work, we simulate for the first time three-phase compositional flow using higher-order finite element methods. Gravity poses complications in modeling multiphase processes because it drives countercurrent flow among phases. To resolve this issue, we propose a new method for the upwinding of three-phase mobilities. Numerical examples, related to enhanced oil recovery and carbon sequestration, are presented to illustrate the capabilities of the proposed algorithm. We pay special attention to challenges associated with gravitational instabilities and take into account compressibility and various phase behavior effects, including swelling, viscosity changes, and vaporization. We find that the proposed higher-order method can capture sharp solution discontinuities, yielding accurate predictions of phase boundaries arising in computational three-phase flow. This work sets the stage for a broad extension of the higher-order methods for numerical simulation of three-phase flow for complex geometries and processes.

  14. Changes in element composition along the spinning duct in a Nephila spider

    Science.gov (United States)

    Knight, David; Vollrath, Fritz

    2001-05-01

    The silk gland of the golden orb spider Nephila edulis connects to the exit spigot through a long S-shaped duct that assists in the formation of the thread. Previous evidence suggests that the epithelium of the distal (last) part of the duct is specialized for ion transport and that a proton pump is involved in this process. Here, we present evidence from SEM (scanning electron microscope)-EDAX (energy dispersive X-ray) microanalysis of rapidly frozen material maintained at approximately -150°C and from the use of pH indicators that the element composition and pH change progressively as the dragline silk dope (spinning solution) passes down the duct to form the thread. Na+ and Cl- composition decreased while K+ and P and S increased. Indicators suggested that the pH dropped from 6.9+/-0.1 to 6.3+/-0.1. These novel findings suggest that the absorption of Na+ and secretion of the more chaotropic K+ may help the silk protein molecules to refold while the secretion of H+ may assist in this process and reduce the repulsive charges on them. This in turn may allow the molecules to approach one another more closely to crystallize. Thus precise control of the ionic environment within the spider's spinning duct may be important in forming a tough insoluble thread and when devising mimetic processes to spin silk proteins industrially.

  15. Comparison of Tensile Strength of Composite Material Elements with Drilled and Molded-in Holes

    Science.gov (United States)

    Langella, A.; Durante, M.

    2008-11-01

    Holes are generally obtained through drilling operations; this causes a property decrease for polymer composites reinforced by fibers, brought about by damage due to fiber continuity interruption, and to delamination between the laminate layers. In this study, specimens with circular holes, both drilled and molded-in, obtained in different ways, are tested in order to investigate on whether it is possible to avoid the decrease in mechanical properties of components with holes. In particular, a number of laminates were manufactured by RIFT (Resin Infusion under Flexible Tool), a closed mold process capable of obtaining large and complex forms, impregnating, under vacuum, a dry preform placed on the rigid mold. At specific points of these laminates, molded-in holes are generated during the resin infusion phase, operating in two different ways: displacing or cutting the fibers in the dry preform. Tensile tests were carried out in order to compare the mechanical properties of elements in composite materials which have molded-in holes generated during the impregnation process, with the properties of those with holes produced after the resin cure by drill operations.

  16. Compositional modeling of three-phase flow with gravity using higher-order finite