WorldWideScience

Sample records for macroporous chitin-silica composites

  1. Macroporous silica–alumina composites with mesoporous walls

    Indian Academy of Sciences (India)

    Gautam Gundiah

    2001-04-01

    Macroporous silica–alumina composites with mesopores have been prepared by employing polymethylmethacrylate beads as templates in the presence of the cationic surfactant, N-cetyl-N,N,N-trimethylammonium bromide. The Si/Al ratio in the composites has been varied between 4.5 and 48 and the occurrence of mesopores has been verified by X-ray diffraction. The surface areas of the samples vary between 676 and 1038 m2g–1, with the highest value in the sample with Si/Al = 48.

  2. Pillaring effects in macroporous carrageenan-silica composite microspheres.

    Science.gov (United States)

    Boissière, M; Tourrette, A; Devoisselle, J M; Di Renzo, F; Quignard, F

    2006-02-01

    The impregnation of a carrageenan gel by a silica sol is an efficient method to form a composite material which can be conveniently activated by CO2 supercritical drying. The textural properties of the solids have been characterized by nitrogen adsorption-desorption at 77 K and their composition by thermogravimetric analysis and EDX microprobe. Morphology was examined by SEM. The silica-carrageenan composites present an open macroporous structure. Silica particles retained inside the gel behaved as pillars between the polysaccharide fibrils and form a stick-and-ball network. The stiffening of the carrageenan gel by silica prevented its shrinkage upon drying. The nature of the alkali cations affected the retention of silica particles inside the gel. In the absence of silica, carrageenan fibrils rearrange under supercritical drying and form an aerogel with cavities in the mesopore range.

  3. AFM PeakForce QNM mode: Evidencing nanometre-scale mechanical properties of chitin-silica hybrid nanocomposites.

    Science.gov (United States)

    Smolyakov, G; Pruvost, S; Cardoso, L; Alonso, B; Belamie, E; Duchet-Rumeau, J

    2016-10-20

    PeakForce Quantitative Nanomechanical Mapping (QNM) AFM mode was used to explore the mechanical properties of textured chitin-silica hybrid films at the nanoscale. The influence of the force applied by the tip on the sample surface was studied for standard homogeneous samples, for chitin nanorods and for chitin-silica hybrid nanocomposites. Thick films of superimposed chitin nanorods showed a monotonous increase of DMT modulus (based on the Derjaguin-Muller-Toporov model) owing to an increase in modulus at the interface between nanorods due to geometrical constraints of the AFM acquisition. A similar variation of DMT modulus was obtained for chitin-silica hybrid thick films related to mechanical strengthening induced by the presence of silica. This work revealed the role of the organic-inorganic interface, at the nanoscale, in the mechanical behaviour of textured materials using PeakForce QNM mode, with optimized analysis conditions.

  4. Organic matter composition of soil macropore surfaces under different agricultural management practices

    Science.gov (United States)

    Glæsner, Nadia; Leue, Marin; Magid, Jacob; Gerke, Horst H.

    2016-04-01

    Understanding the heterogeneous nature of soil, i.e. properties and processes occurring specifically at local scales is essential for best managing our soil resources for agricultural production. Examination of intact soil structures in order to obtain an increased understanding of how soil systems operate from small to large scale represents a large gap within soil science research. Dissolved chemicals, nutrients and particles are transported through the disturbed plow layer of agricultural soil, where after flow through the lower soil layers occur by preferential flow via macropores. Rapid movement of water through macropores limit the contact between the preferentially moving water and the surrounding soil matrix, therefore contact and exchange of solutes in the water is largely restricted to the surface area of the macropores. Organomineral complex coated surfaces control sorption and exchange properties of solutes, as well as availability of essential nutrients to plant roots and to the preferentially flowing water. DRIFT (Diffuse Reflectance infrared Fourier Transform) Mapping has been developed to examine composition of organic matter coated macropores. In this study macropore surfaces structures will be determined for organic matter composition using DRIFT from a long-term field experiment on waste application to agricultural soil (CRUCIAL, close to Copenhagen, Denmark). Parcels with 5 treatments; accelerated household waste, accelerated sewage sludge, accelerated cattle manure, NPK and unfertilized, will be examined in order to study whether agricultural management have an impact on the organic matter composition of intact structures.

  5. Thermoresponsive composite hydrogels with aligned macroporous structure by ice-templated assembly.

    Science.gov (United States)

    Bai, Hao; Polini, Alessandro; Delattre, Benjamin; Tomsia, Antoni P

    2013-10-26

    Natural tissues, such as bone, tendon, and muscle, have well defined hierarchical structures, which are crucial for their biological and mechanical functions. However, mimicking these structural features still remains a great challenge. In this study, we use ice-templated assembly and UV-initiated cryo-polymerization to fabricate a novel kind of composite hydrogel which have both aligned macroporous structure at micrometer scale and a nacre-like layered structure at nanoscale. Such hydrogels are macroporous, thermoresponsive, and exhibit excellent mechanical performance (tough and high stretchable), attractive properties that are of significant impact on the wide applications of composite hydrogels, especially as tissue-engineering scaffolds. The fabrication method in this study including freeze-casting and cryo-polymerization can also be applied to other materials, which makes it promising for designing and developing smart and multifunctional composite hydrogels with hierar chical structures.

  6. Macroporous Composite Cryogels with Embedded Polystyrene Divinylbenzene Microparticles for the Adsorption of Toxic Metabolites from Blood

    Directory of Open Access Journals (Sweden)

    Tanja Eichhorn

    2013-01-01

    Full Text Available Composite monolithic adsorbents were prepared by the incorporation of neutral polystyrene divinylbenzene (PS-DVB microparticles into macroporous polymer structures produced by cryogelation of agarose or poly(vinyl alcohol. The composite materials exhibited excellent flow-through properties. Scanning electron microscopy of the composite cryogels revealed that the microparticles were covered by thin films of poly(vinyl alcohol or agarose and thus were withheld in the monolith structure. Plain PS-DVB microparticles showed efficient adsorption of albumin-bound toxins related to liver failure (bilirubin and cholic acid and of cytokines (tumor necrosis factor-alpha and interleukin-6. The rates of adsorption and the amount of adsorbed factors were lower for the embedded microparticles as compared to the parent PS-DVB microparticles, indicating the importance of the accessibility of the adsorbent pores. Still, the macroporous composite materials showed efficient adsorption of albumin-bound toxins related to liver failure as well as efficient binding of cytokines, combined with good blood compatibility. Thus, the incorporation of microparticles into macroporous polymer structures may provide an option for the development of adsorption modules for extracorporeal blood purification.

  7. Biocompatibility, degradability, bioactivity and osteogenesis of mesoporous/macroporous scaffolds of mesoporous diopside/poly(l-lactide) composite

    OpenAIRE

    Liu, Zhulin; Ji, Jiajin; Tang, Songchao; Qian, Jun; Yan, Yonggang; Yu, Baoqing; Su, Jiacan; Wei, Jie

    2015-01-01

    Bioactive mesoporous diopside (m-DP) and poly(l-lactide) (PLLA) composite scaffolds with mesoporous/macroporous structure were prepared by the solution-casting and particulate-leaching method. The results demonstrated that the degradability and bioactivity of the mesoporous/macroporous scaffolds were significantly improved by incorporating m-DP into PLLA, and that the improvement was m-DP content-dependent. In addition, the scaffolds containing m-DP showed the ability to neutralize acidic deg...

  8. Macropores and macropore transport

    DEFF Research Database (Denmark)

    Iversen, Bo Vangsø; Lamandé, Mathieu; Torp, Søren Bent

    2012-01-01

    a stronger relationship was found at saturation. Results of a test of the number of soil columns needed for a representative distribution of macropores for the measurement of saturated hydraulic conductivity indicated that approximately six soil columns were enough. Our work suggests that integrating......Preferential transport of water through soil macropores is a governing process in the facilitated transport of strongly sorbing compounds. The aim of this study was to investigate the relationships between macropore density and the hydraulic conductivity of the soil and to test the sampling...... representativeness of soil columns for the measurement of saturated hydraulic conductivity. Macropore density was determined in three horizons in four typical, Danish soil types (third year of pasture) and saturated hydraulic conductivity and near-saturated hydraulic conductivity were measured in the laboratory...

  9. Pore-filling Three-dimensionally Ordered Macroporous Polyimide Composite Proton Conducting Membranes

    Institute of Scientific and Technical Information of China (English)

    DAI Xin; GENG Lei; LIU Dan; L(U) Chang-li; YANG Bai

    2011-01-01

    The silica opal templates were prepared from three silica colloids of different diameters of 230 nm,500nm and 1.5 μm by a filtration route.The large-scale stable opal template membranes after sintering the deposited SiO2 opal template can be successfully obtained by optimizing the pH value and NaCl concentration in silica colloidal solutions.The three-dimensionally ordered macroporous(3DOM) polyimide membranes without crack were fabricated by reproducing the structure of silica opal template.We prepared the pore-filling composite proton exchange membranes by filling the 3DOM structure with proton conducting organosilane sol.The result indicates that the composite membranes exhibit higher water uptake than pure filling organosilane gel.The proton conductivity increased with the increasing of pore cell in composite membranes.

  10. A composite chitosan-gelatin bi-layered, biomimetic macroporous scaffold for blood vessel tissue engineering.

    Science.gov (United States)

    Badhe, Ravindra V; Bijukumar, Divya; Chejara, Dharmesh R; Mabrouk, Mostafa; Choonara, Yahya E; Kumar, Pradeep; du Toit, Lisa C; Kondiah, Pierre P D; Pillay, Viness

    2017-02-10

    A composite chitosan-gelatin macroporous hydrogel-based scaffold with bi-layered tubular architecture was engineered by solvent casting-co-particulate leaching. The scaffold constituted an inner macroporous layer concealed by a non-porous outer layer mimicking the 3D matrix of blood vessels with cellular adhesion and proliferation. The scaffold was evaluated for its morphological, physicochemical, physicomechanical and biodurability properties employing SEM, FTIR, DSC, XRD, porositometry, rheology and texture analysis. The fluid uptake and biodegradation in the presence of lysozymes was also investigated. Cellular attachment and proliferation was analysed using human dermal fibroblasts (HDF-a) seeded onto the scaffold and evaluated by MTT assay, SEM, and confocal microscopy. Results demonstrated that the scaffold had a desirable tensile strength=95.81±11kPa, elongation at break 112.5±13%, porosity 82% and pores between 100 and 230μm, 50% in vitro biodegradation at day 16 and proliferated fibroblasts over 20 days. These results demonstrate that scaffold may be an excellent tubular archetype for blood vessel tissue engineering.

  11. A nano-hydroxyapatite--pullulan/dextran polysaccharide composite macroporous material for bone tissue engineering.

    Science.gov (United States)

    Fricain, Jean Christophe; Schlaubitz, Silke; Le Visage, Catherine; Arnault, Isabelle; Derkaoui, Sidi Mohammed; Siadous, Robin; Catros, Sylvain; Lalande, Charlotte; Bareille, Reine; Renard, Martine; Fabre, Thierry; Cornet, Sandro; Durand, Marlène; Léonard, Alain; Sahraoui, Nouredine; Letourneur, Didier; Amédée, Joëlle

    2013-04-01

    Research in bone tissue engineering is focused on the development of alternatives to allogenic and autologous bone grafts that can stimulate bone healing. Here, we present scaffolds composed of the natural hydrophilic polysaccharides pullulan and dextran, supplemented or not with nanocrystalline hydroxyapatite particles (nHA). In vitro studies revealed that these matrices induced the formation of multicellular aggregates and expression of early and late bone specific markers with human bone marrow stromal cells in medium deprived of osteoinductive factors. In absence of any seeded cells, heterotopic implantation in mice and goat, revealed that only the composite macroporous scaffold (Matrix + nHA) (i) retained subcutaneously local growth factors, including Bone Morphogenetic Protein 2 (BMP2) and VEGF165, (ii) induced the deposition of a biological apatite layer, (iii) favored the formation of a dense mineralized tissue subcutaneously in mice, as well osteoid tissue after intramuscular implantation in goat. The composite scaffold was thereafter implanted in orthotopic preclinical models of critical size defects, in small and large animals, in three different bony sites, i.e. the femoral condyle of rat, a transversal mandibular defect and a tibial osteotomy in goat. The Matrix + nHA induced a highly mineralized tissue in the three models whatever the site of implantation, as well as osteoid tissue and bone tissue regeneration in direct contact to the matrix. We therefore propose this composite matrix as a material for stimulating bone cell differentiation of host mesenchymal stem cells and bone formation for orthopedic and maxillofacial surgical applications.

  12. Peculiarities of formation of phase composition, porous structure, and catalytic properties of tungsten oxide-based macroporous materials fabricated by sol–gel synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Papynov, Evgeniy Konstantinovich, E-mail: Papynov@mail.ru [Institute of Chemistry, Far East Branch, Russian Academy of Sciences, Prospect 100-let Vladivostoku, 159, Vladivostok 690022 (Russian Federation); Far Eastern Federal University, School of Natural Sciences, Suhanova, 8, Vladivostok 690091 (Russian Federation); Mayorov, Vitaliy Yurevich, E-mail: 024205@inbox.ru [Institute of Chemistry, Far East Branch, Russian Academy of Sciences, Prospect 100-let Vladivostoku, 159, Vladivostok 690022 (Russian Federation); Palamarchuk, Marina Sergeevna, E-mail: 02.06.1984@mail.ru [Institute of Chemistry, Far East Branch, Russian Academy of Sciences, Prospect 100-let Vladivostoku, 159, Vladivostok 690022 (Russian Federation); Avramenko, Valentin Aleksandrovich, E-mail: avramenko1@yandex.ru [Institute of Chemistry, Far East Branch, Russian Academy of Sciences, Prospect 100-let Vladivostoku, 159, Vladivostok 690022 (Russian Federation); Far Eastern Federal University, School of Natural Sciences, Suhanova, 8, Vladivostok 690091 (Russian Federation)

    2014-02-15

    The method of template sol–gel synthesis of tungsten oxide-based macroporous materials using ‘core–shell’ latex particles as colloid templates is described. The chemical composition and structural characteristics of the synthesized macroporous oxide systems have been investigated. The peculiarities of formation of material phase composition and macroporous structure under different template thermal destruction conditions have been revealed. An optimal method of a targeted synthesis of the crystalline tungsten(VI) oxide having a defect-free macroporous structure (average pore size 160 nm) and efficient catalytic properties under organic liquid phase oxidation conditions has been suggested. The prospects of the fabricated material application as catalysts of hydrothermal oxidation of radionuclide organic complexes at radioactive waste decontamination have been demonstrated. - Highlights: • Macroporous tungsten oxides were fabricated via sol–gel process. • The correlation between synthesis conditions and composition was determined. • Influence of synthesis conditions on porous structure has been explained. • The effects of template thermodestruction have been set up. • High potential of such materials for catalysis applications has been shown.

  13. Metal organic frameworks/macroporous carbon composites with enhanced stability properties and good electrocatalytic ability for ascorbic acid and hemoglobin.

    Science.gov (United States)

    Zhang, Yufan; Nsabimana, Anaclet; Zhu, Liande; Bo, Xiangjie; Han, Ce; Li, Mian; Guo, Liping

    2014-11-01

    The thermal, water and electrochemical stability of Cu-based metal organic frameworks (Cu-MOFs) confined in macroporous carbon (MPC) hybrids has been investigated. Thermogravimetric analyses, X-Ray diffraction, scanning electron microscopy, and cyclic voltammetry were employed to confirm the stability of pure Cu-MOFs, MPC, and Cu-MOFs-MPC. As compared to pure Cu-MOFs, the porous composite materials of MPC and Cu-MOFs interact and seem to form new materials having homogenous structure and chemistry, which show structural stability in aqueous media and electrochemical stability in phosphate buffer solution (PBS pH 7.4). The detection of ascorbic acid and hemoglobin is performed as an electrochemical probe, indicating Cu-MOFs-MPC holds great promise for the design of electrochemical sensors.

  14. Three-dimensional ordered macroporous (3DOM) composite for electrochemical study on acetylcholinesterase inhibition induced by endogenous neurotoxin.

    Science.gov (United States)

    Teng, Yingqiao; Fu, Ying; Xu, Lili; Lin, Bin; Wang, Zhongchuan; Xu, Zhiai; Jin, Litong; Zhang, Wen

    2012-09-13

    In this paper, an electrochemical acetylcholinesterase (AChE) inhibition assay based on three-dimensional ordered macroporous (3DOM) composite was conducted. The 3DOM composite was first fabricated on the glassy carbon electrode by electropolymerization of aniline in the presence of ionic liquid (IL) on a sacrificial silica nanospheres template. After the silica nanospheres were etched, an IL-doped polyaniline (IL-PANI) film with 3DOM morphology was formed. Then, gold nanoparticles (AuNPs) were decorated on the IL-PANI film by electrodeposition. The immobilized AChE on the 3DOM composite displayed favorable affinity to substrate acetylthiocholine chloride (ATCh), and the 3DOM composite showed excellent electrocatalytic effect on thiocholine, the hydrolysis product of ATCh. The presence of IL and AuNPs could improve the sensitivity by accelerating the electron transfer. The designed AChE biosensor was successfully applied to evaluate the AChE inhibition induced by endogenous neurotoxin 1(R),2N-dimethyl-6,7-dihydroxy-1,2,3,4-tetrahydroisoquinoline [(R)-NMSal]. The results demonstrate that (R)-NMSal exerts a considerable effect on AChE activity, and the inhibition is reversible. The developed method offers a new approach for AChE inhibition assay, which is of great benefit in understanding the mechanism behind neurotoxin-induced neurodegenerative disorders.

  15. Control of TiO2 grain size and positioning in three-dimensionally ordered macroporous TiO2/C composite anodes for lithium ion batteries.

    Science.gov (United States)

    Petkovich, Nicholas D; Rudisill, Stephen G; Wilson, Benjamin E; Mukherjee, Anwesha; Stein, Andreas

    2014-01-21

    After several high-profile incidents that raised concerns about the hazards posed by lithium ion batteries, research has accelerated in the development of safer electrodes and electrolytes. One anode material, titanium dioxide (TiO2), offers a distinct safety advantage in comparison to commercialized graphite anodes, since TiO2 has a higher potential for lithium intercalation. In this article, we present two routes for the facile, robust synthesis of nanostructured TiO2/carbon composites for use as lithium ion battery anodes. These materials are made using a combination of colloidal crystal templating and surfactant templating, leading to the first report of a three-dimensionally ordered macroporous TiO2/C composite with mesoporous walls. Control over the size and location of the TiO2 crystallites in the composite (an often difficult task) has been achieved by changing the chelating agent in the precursor. Adjustment of the pyrolysis temperature has also allowed us to strike a balance between the size of the TiO2 crystallites and the degree of carbonization. Using these pathways to optimize electrochemical performance, the primarily macroporous TiO2/C composites can attain a capacity of 171 mAh/g at a rate of 1 C. Additionally, the carbon in these composites can function as a secondary template for high-surface-area, macroporous TiO2 with disordered mesoporous voids. Combining the advantages of a nanocrystalline framework and significant open porosity, the macroporous TiO2 delivers a stable capacity (>170 mAh/g at a rate of C/2) over 100 cycles.

  16. Ceramic Identity Contributes to Mechanical Properties and Osteoblast Behavior on Macroporous Composite Scaffolds

    Directory of Open Access Journals (Sweden)

    J. Kent Leach

    2012-05-01

    Full Text Available Implants formed of metals, bioceramics, or polymers may provide an alternative to autografts for treating large bone defects. However, limitations to each material motivate the examination of composites to capitalize on the beneficial aspects of individual components and to address the need for conferring bioactive behavior to the polymer matrix. We hypothesized that the inclusion of different bioceramics in a ceramic-polymer composite would alter the physical properties of the implant and the cellular osteogenic response. To test this, composite scaffolds formed from poly(lactide-co-glycolide (PLG and either hydroxyapatite (HA, β-tricalcium phosphate (TCP, or bioactive glass (Bioglass 45S®, BG were fabricated, and the physical properties of each scaffold were examined. We quantified cell proliferation by DNA content, osteogenic response of human osteoblasts (NHOsts to composite scaffolds by alkaline phosphatase (ALP activity, and changes in gene expression by qPCR. Compared to BG-PLG scaffolds, HA-PLG and TCP-PLG composite scaffolds possessed greater compressive moduli. NHOsts on BG-PLG substrates exhibited higher ALP activity than those on control, HA-, or TCP-PLG scaffolds after 21 days, and cells on composites exhibited a 3-fold increase in ALP activity between 7 and 21 days versus a minimal increase on control scaffolds. Compared to cells on PLG controls, RUNX2 expression in NHOsts on composite scaffolds was lower at both 7 and 21 days, while expression of genes encoding for bone matrix proteins (COL1A1 and SPARC was higher on BG-PLG scaffolds at both time points. These data demonstrate the importance of selecting a ceramic when fabricating composites applied for bone healing.

  17. Composite Si/PS membrane pressure sensors with micro and macro-porous silicon

    Indian Academy of Sciences (India)

    L Sujatha; Enakshi Bhattacharya

    2009-08-01

    Porous Silicon (PS) is a versatile material with many unique features making it viable in the field of Microelectromechanical Systems (MEMS). In this paper, we discuss the optimization of formation parameters of micro and macro PS with different porosity and thickness for use in pressure sensors. The optimized material is used in the fabrication of composite Si/PS membranes in piezo-resistive pressure sensors and tested. Pressure sensors with composite membranes have higher sensitivity than those with single crystalline silicon membrane with the sensitivity increasing as the porosity increases. For the same porosity and thickness of the PS layer, Si/micro PS membranes exhibit higher sensitivity than Si/macro PS ones. The offset voltage in these sensors is found to be high and can be due to the stress induced in the membrane during PS formation. Offset voltage and stress values are found to be higher in composite membranes with micro PS as compared to macro PS.

  18. A Metal-Free, Free-Standing, Macroporous Graphene@g-C₃N₄ Composite Air Electrode for High-Energy Lithium Oxygen Batteries.

    Science.gov (United States)

    Luo, Wen-Bin; Chou, Shu-Lei; Wang, Jia-Zhao; Zhai, Yu-Chun; Liu, Hua-Kun

    2015-06-01

    The nonaqueous lithium oxygen battery is a promising candidate as a next-generation energy storage system because of its potentially high energy density (up to 2-3 kW kg(-1)), exceeding that of any other existing energy storage system for storing sustainable and clean energy to reduce greenhouse gas emissions and the consumption of nonrenewable fossil fuels. To achieve high energy density, long cycling stability, and low cost, the air electrode structure and the electrocatalysts play important roles. Here, a metal-free, free-standing macroporous graphene@graphitic carbon nitride (g-C3N4) composite air cathode is first reported, in which the g-C3N4 nanosheets can act as efficient electrocatalysts, and the macroporous graphene nanosheets can provide space for Li2O2 to deposit and also promote the electron transfer. The electrochemical results on the graphene@g-C3N4 composite air electrode show a 0.48 V lower charging plateau and a 0.13 V higher discharging plateau than those of pure graphene air electrode, with a discharge capacity of nearly 17300 mA h g(-1)(composite) . Excellent cycling performance, with terminal voltage higher than 2.4 V after 105 cycles at 1000 mA h g(-1)(composite) capacity, can also be achieved. Therefore, this hybrid material is a promising candidate for use as a high energy, long-cycle-life, and low-cost cathode material for lithium oxygen batteries.

  19. Three-dimensionally ordered macroporous Li2FeSiO4/C composite as a high performance cathode for advanced lithium ion batteries

    Science.gov (United States)

    Ding, Zhengping; Liu, Jiatu; Ji, Ran; Zeng, Xiaohui; Yang, Shuanglei; Pan, Anqiang; Ivey, Douglas G.; Wei, Weifeng

    2016-10-01

    Li2MSiO4 (M = Mn, Fe, Co, Ni, et al.) has received great attention because of the theoretical possibility to reversibly deintercalate two Li+ ions from the structure. However, the silicates still suffer from low electronic conductivity, sluggish lithium ion diffusion and structural instability upon deep cycling. In order to solve these problems, a "hard-soft" templating method has been developed to synthesize three-dimensionally ordered macroporous (3DOM) Li2FeSiO4/C composites. The 3DOM Li2FeSiO4/C composites show a high reversible capacity (239 mAh g-1) with ∼1.50 lithium ion insertion/extraction, a capacity retention of nearly 100% after 420 cycles and excellent rate capability. The enhanced electrochemical performance is ascribed to the interconnected carbon framework that improves the electronic conductivity and the 3DOM structure that offers short Li ion diffusion pathways and restrains volumetric changes.

  20. Ultrasensitive electrochemical immunoassay for carcinoembryonic antigen based on three-dimensional macroporous gold nanoparticles/graphene composite platform and multienzyme functionalized nanoporous silver label

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Guoqiang; Lu, Juanjuan [Key Laboratory of Chemical Sensing and Analysis in Universities of Shandong, School of Chemistry and Chemical Engineering, University of Jinan, Jinan 250022 (China); Ge, Shenguang [Shandong Provincial Key Laboratory of Fluorine Chemistry and Chemical Materials, School of Chemistry and Chemical Engineering, University of Jinan, Jinan 250022 (China); Song, Xianrang [Cancer Research Center, Shandong Tumor Hospital, Jinan 250012 (China); Yu, Jinghua, E-mail: ujn.yujh@gmail.com [Key Laboratory of Chemical Sensing and Analysis in Universities of Shandong, School of Chemistry and Chemical Engineering, University of Jinan, Jinan 250022 (China); Yan, Mei; Huang, Jiadong [Key Laboratory of Chemical Sensing and Analysis in Universities of Shandong, School of Chemistry and Chemical Engineering, University of Jinan, Jinan 250022 (China)

    2013-05-02

    Graphical abstract: Three-dimensional macroporous AuNPs/graphene complex (3D-AuNPs/GN) and functionalized NPS were prepared to immobilize Ab{sub 1} and Ab{sub 2} respectively and combined to fabricate a sandwich-type ultrasensitive electro-chemical immunosensor for detecting CEA. -- Highlights: •Ultrasensitive electrochemical immunoassay for detecting CEA was developed. •3D-AuNPs/GN was employed as the carrier of primary antibodies. •Multienzyme functionalized nanoporous silver was used as signal enhancer. -- Abstract: Three-dimensional macroporous gold nanoparticles/graphene composites (3D-AuNPs/GN) were synthesized through a simple two-step process, and were used to modify working electrode sensing platform, based on which a facile electrochemical immunoassay for sensitive detection of carcinoembryonic antigen (CEA) in human serum was developed. In the proposed 3D-AuNPs/GN, AuNPs were distributed not just on the surface, but also on the inside of graphene. And this distribution property increased the area of sensing surface, resulting in capturing more primary antibodies as well as improving the electronic transmission rate. In the presence of CEA, a sandwich-type immune composite was formed on the sensing platform, and the horseradish peroxidase-labeled anti-CEA antibody (HRP-Ab{sub 2})/thionine/nanoporous silver (HRP-Ab{sub 2}/TH/NPS) signal label was captured. Under optimal conditions, the electrochemical immunosensor exhibited excellent analytical performance: the detection range of CEA is from 0.001 to 10 ng mL{sup −1} with low detection limit of 0.35 pg mL{sup −1} and low limit of quantitation (LOQ) of 0.85 pg mL{sup −1}. The electrochemical immunosensor showed good precision, acceptable stability and reproducibility, and could be used for the detection of CEA in real samples. The proposed method provides a promising platform of clinical immunoassay for other biomolecules.

  1. Ice as a Green-Structure-Directing Agent in the Synthesis of Macroporous MWCNTs and Chondroitin Sulphate Composites

    Science.gov (United States)

    Nardecchia, Stefania; Serrano, María Concepción; García-Argüelles, Sara; Maia Da Costa, Marcelo E. H.; Ferrer, María Luisa; Gutiérrez, María C.

    2017-01-01

    The incorporation of multi-walled carbon nanotubes (MWCNTs) into chondroitin sulphate-based scaffolds and the effect on the structural, mechanical, conductive, and thermal properties of the resulting scaffolds is investigated. Three-dimensional hierarchical materials are prepared upon the application of the ice segregation-induced self-assembly (ISISA) process. The use of ice as structure-directing agents avoids chemicals typically used for this purpose (e.g., surfactants, block copolymers, etc.), hence, emphasising the green features of this soft-templating approach. We determine the critical parameters that control the morphology of the scaffolds formed upon ice-templating (i.e., MWCNTs type, freezing conditions, polymer and MWCNT concentration). MWCNTs are surface functionalized by acidic treatment. MWCNT functionalization is characterized by Raman, Fourier transfer infrared (FTIR) and X-ray Photoelectron (XPS) spectroscopies. Scanning electron microscopy (SEM) analysis and porosity studies reveal that MWCNT content modifies the morphology of the macroporous structure, which decreases by increasing MWCNT concentration. Differences in scaffold morphology should be translated into their conductivity and mechanical properties. As a general trend, the Young’s modulus and the electrical conductivity of the scaffolds increase with the MWCNT content. Preliminary biocompatibility tests with human osteoblast-like cells also reveal the capability of these structures to support cell growth. PMID:28772715

  2. Pullulan/dextran/nHA macroporous composite beads for bone repair in a femoral condyle defect in rats.

    Directory of Open Access Journals (Sweden)

    Silke Schlaubitz

    Full Text Available The repair of bone defects is of particular interest for orthopedic, oral, maxillofacial, and dental surgery. Bone loss requiring reconstruction is conventionally addressed through bone grafting. Depending on the size and the location of the defect, this method has limits and risks. Biomaterials can offer an alternative and have features supporting bone repair. Here, we propose to evaluate the cellular penetration and bone formation of new macroporous beads based on pullulan/dextran that has been supplemented with nanocrystalline hydroxyapatite in a rat model. Cross-linked beads of 300-500 µm diameters were used in a lateral femoral condyle defect and analyzed by magnetic resonance imaging, micro-computed tomography, and histology in comparison to the empty defects 15, 30, and 70 days after implantation. Inflammation was absent for both conditions. For empty defects, cellularisation and mineralization started from the periphery of the defect. For the defects containing beads, cellular structures filling out the spaces between the scaffolds with increasing interconnectivity and trabecular-like organization were observed over time. The analysis of calcified sections showed increased mineralization over time for both conditions, but was more pronounced for the samples containing beads. Bone Mineral Density and Bone Mineral Content were both significantly higher at day 70 for the beads in comparison to empty defects as well as compared with earlier time points. Analysis of newly formed tissue around the beads showed an increase of osteoid tissue, measured as percentage of the defect surface. This study suggests that the use of beads for the repair of small size defects in bone may be expanded on to meet the clinical need for a ready-to-use fill-up material that can favor bone formation and mineralization, as well as promote vessel ingrowth into the defect site.

  3. Composite of macroporous carbon with honeycomb-like structure from mollusc shell and NiCo(2)O(4) nanowires for high-performance supercapacitor.

    Science.gov (United States)

    Xiong, Wei; Gao, Yongsheng; Wu, Xu; Hu, Xuan; Lan, Danni; Chen, Yangyang; Pu, Xuli; Zeng, Yan; Su, Jun; Zhu, Zhihong

    2014-01-01

    Novel biological carbon materials with highly ordered microstructure and large pore volume have caused great interest due to their multifunctional properties. Herein, we report the preparation of an interconnected porous carbon material by carbonizing the organic matrix of mollusc shell. The obtained three-dimensional carbon skeleton consists of hexangular and tightly arranged channels, which endow it with efficient electrolyte penetration and fast electron transfer, enable the mollusc shell based macroporous carbon material (MSBPC) to be an excellent conductive scaffold for supercapacitor electrodes. By growing NiCo2O4 nanowires on the obtained MSBPC, NiCo2O4/MSBPC composites were synthesized. When used on supercapacitor electrode, it exhibited anomalously high specific capacitance (∼1696 F/g), excellent rate performance (with the capacity retention of 58.6% at 15 A/g) and outstanding cycling stability (88% retention after 2000 cycles). Furthermore, an all-solid-state symmetric supercapacitor was also assembled based on this NiCo2O4/MSBPC electrode and showed good electrochemical performance with an energy density of 8.47 Wh/kg at 1 A/g, good stability over 10000 cycles. And we believe that more potential applications beyond energy storage can be developed based on this MSBPC.

  4. Macroporous cryogel metal nanoparticle composites for H2 generation from NaBH4 hydrolysis in seawater

    Science.gov (United States)

    Sahiner, Nurettin; Yildiz, Sema; Sahiner, Mehtap; Issa, Zuheir A.; Al-Lohedan, Hamad

    2015-11-01

    Poly(2-hydroxy ethyl methacrylate) p(HEMA), poly(acrylic acid) p(AAc), poly(3-sulfopropyl methacrylate) p(SPM), and poly(4-vinylpyridine) p(4-VP) cryogels from various monomers containing functional groups such as sbnd COOH, sbnd SO3H, and sbnd OH, and lbond2 N monomer were synthesized under cryogenic conditions via free radical polymerization technique. The synthesized cryogels were used as templates for metal nanoparticle synthesis using Co and Ni, and the prepared composite cryogels were utilized in hydrogen (H2) generation from the hydrolysis reaction of NaBH4. It was found that the hydrolysis reaction of NaBH4 in seawater is much faster than in DI water when using the p(SPM)-Co catalyst system. Parameters such as water and metal types for different cryogels, concentration of NaBH4, amount of metal catalyst, and temperature were investigated. The hydrogen generation rate (HGR) and turnover frequency (TOF) values were also investigated for temperature dependency. It was found that as the temperature increased from 30 to 70 °C, the HGR and TOF increased from 1288.0 ± 61.2 (ml H2) (g of metal min)-1 and 3.1 ± 0.1 mol H2 (mol metal min)-1 to 7707.8 ± 179.4 (ml H2) (g of metal min)-1, and 16.1 ± 0.4 mol H2 (mol metal min)-1, respectively. The activation energy, enthalpy, and entropy were 31.1 kJ (mol K)-1, 27.7 kJ (mol K)-1, and -196.4 J (mol K)-1, respectively, for NaBH4 hydrolysis catalyzed in seawater by p(SPM)-Co composite system.

  5. Fabrication and Cell Responsive Behavior of Macroporous PLLA/Gelatin Composite Scaffold with Hierarchical Micro-Nano Pore Structure

    Directory of Open Access Journals (Sweden)

    Kedong Song

    2015-03-01

    Full Text Available Scaffolds providing a 3D environment which can effectively promote the adhesion, proliferation and differentiation of cells are crucial to tissue regeneration. In this study, the poly-l-lactic acid (PLLA scaffold with hierarchical pore structural was fabricated via two-step thermally induced phase separation (TIPS. To mimic both physical architecture and chemical composite of natural bone extracellular matrix (ECM, gelatin fibers were introduced into the pores of PLLA scaffolds and formed 3D network structure via TIPS. Human adipose tissue-derived stem cells (ADSCs were harvested and seeded into PLLA/gel hybrid scaffolds and cultured in vitro for biocompatibility assay. The surface morphology, porosity and compressive modulus of scaffolds were characterized by scanning electron microscopy (SEM, density analysis and compression test respectively. The results showed that hybrid scaffolds had high porosity (91.62%, a good compressive modulus (2.79 ± 0.20 MPa, nanometer fibers (diameter around 186.39~354.30 nm and different grades of pore size from 7.41 ± 2.64 nm to 387.94 ± 102.48 nm. The scaffolds with mild hydrolysis by NaOH were modified by 1-ethyl-3-(3-dimethyl ami-nopropyl carbodiimide/N-hydroxysuccinimide (EDC/NHS. Gelatin was performed onto PLLA scaffold via TIPS aiming at enhancement cell-material interaction. In comparison with PLLA scaffold, the PLLA/gel scaffold had better biological performance and the mechanical properties because the gelatin fibers homogeneously distributed in each pore of PLLA scaffold and formed 3D network structure.

  6. Fabrication and Characteristics of TiO2-ZnO Macroporous Composite Nanomaterials%大孔TiO2-ZnO复合纳米材料的制备及其性能

    Institute of Scientific and Technical Information of China (English)

    刘威; 徐耀维; 谭永佳; 钟伟; 廖宗文

    2011-01-01

    The TiO2-ZnO macroporous composite nanomaterials were prepared successfully by sol-gel method and polystyrene (PS) microspheres templates. The crystal structure and topography of the macroporous nanomaterials were characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM). The photocatalytic activity was studied while the methyl orange was used as the degradation object. The results show that the PS microspheres synthesized by emulsifier-free emulsion polymerization are uniform with the particle size of 900 nm. With the close-packed PS microspheres template, the diameter of TiO2-ZnO macroporous nanomaterials is about 900 nm and the thickness of the pore wall is about 20 nm. The XRD result indicates that TiO2 in macroporous nanomaterials is the anatase structure. The photocatalytic degradation for macroporous nanomaterials was carried out with the methyl orange as the model of the organic pollutant. The results show that the degradation rate of the methyl orange reaches 91.3% by the TiO2-ZnO macroporous nanomaterials, which is 11.2% higher than that of common TiO2-ZnO nanomaterials without the macroporous structures.%采用溶胶-凝胶法和胶态晶体模板法,制备了大孔TiO2-ZnO复合纳米材料.其晶相结构和形貌特征采用X射线粉末衍射(XRD)、透视电子显微镜(TEM)进行了表征,并以甲基橙为降解对象,对其光催化活性进行了研究.结果表明,采用无皂乳液聚合法得到的聚苯乙烯(PS)微球粒径均匀,为900 nm.以紧密堆积的PS胶态晶体为模板,制得的TiO2-ZnO复合纳米材料的大孔孔径约为900 nm,孔壁厚度约为20 nm.XRD结果显示,材料中的TiO2为锐钛矿型.光催化降解结果表明,大孔TiO2-ZnO复合纳米材料对甲基橙降解1.5 h后降解率可达91.3%,与普通的TiO2-ZnO纳米粉体材料相比提高了11.2%.

  7. Novel macroporous amphoteric gels: Preparation and characterization

    Directory of Open Access Journals (Sweden)

    S. Kudaibergenov

    2012-05-01

    Full Text Available Macroporous amphoteric gels based on allylamine, methacrylic acid and acrylamide crosslinked by N,N'-methylenebisacrylamide were synthesized by radical copolymerization of monomers in cryoconditions. The composition of cryogels was determined by combination of potentiometric and conductimetric titrations. The morphology of cryogels was evaluated by scanning electron microscope (SEM. Cryogels exhibited sponge-like porous structure with pore size ranging from 50 to 200 μm. The values of the isoelectric points (IEPs determined from the swelling experiments arranged between 3.5 and 4.3. The high adsorption-desorption capacity of amphoteric cryogels with respect to mM and trace concentrations of copper, nickel, and cobalt ions was demonstrated. It was shown that the macroporous amphoteric cryogels are able to adsorb up to 99.9% of copper, nickel, and cobalt ions from 10–3 mol•L–1 aqueous solution.

  8. Quantifying macropore recharge: Examples from a semi-arid area

    Science.gov (United States)

    Wood, W.W.; Rainwater, K.A.; Thompson, D.B.

    1997-01-01

    The purpose of this paper is to illustrate the significantly increased resolution of determining macropore recharge by combining physical, chemical, and isotopic methods of analysis. Techniques for quantifying macropore recharge were developed for both small-scale (1 to 10 km2) and regional-scale areas in and semi-arid areas. The Southern High Plains region of Texas and New Mexico was used as a representative field site to test these methods. Macropore recharge in small-scale areas is considered to be the difference between total recharge through floors of topographically dosed basins and interstitial recharge through the same area. On the regional scale, macropore recharge was considered to be the difference between regional average annual recharge and interstitial recharge measured in the unsaturated zone. Stable isotopic composition of ground water and precipitation was used us an independent estimate of macropore recharge on the regional scale. Results of this analysis suggest that in the Southern High Plains recharge flux through macropores is between 60 and 80 percent of the total 11 mm/y. Between 15 and 35 percent of the recharge occurs by interstitial recharge through the basin floors. Approximately 5 percent of the total recharge occurs as either interstitial or matrix recharge between the basin floors, representing approximately 95 percent of the area. The approach is applicable to other arid and semi-arid areas that focus rainfall into depressions or valleys.The purpose of this paper is to illustrate the significantly increased resolution of determining macropore recharge by combining physical, chemical, and isotopic methods of analysis. Techniques for quantifying macropore recharge were developed for both small-scale (1 to 10 km2) and regional-scale areas in arid and semi-arid areas. The Southern High Plains region of Texas and New Mexico was used as a representative field site to test these methods. Macropore recharge in small-scale areas is considered

  9. Fabrication of Macro-porous β-zeolite by Using Colloidal Polystyrene Spheres as a Template

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A β-zeolite/polystyrene composite material was synthesized by co-deposition of mono-disperse polystyrene spheres and nano β-zeolite particles in aqueous suspension on a vertical substrate. Macro-porous β-zeolite was obtained after the polystyrene template was removed by calcination. The micro/macro-pore structure of the prepared β-zeolite was highly ordered. In comparison with other assembly methods, the co-deposition method could obtain a highly ordered macro-porous material with relatively large zeolite filling particles, and therefore the co-deposition of particles with different size is a promising method for the fabrication of macro-porous materials.

  10. Template synthesis of ordered macroporous hydroxyapatite bioceramics.

    Science.gov (United States)

    Ji, Lijun; Jell, Gavin; Dong, Yixiang; Jones, Julian R; Stevens, Molly M

    2011-08-28

    Hydroxyapatite has found wide application in bone tissue engineering. Here we use a macroporous carbon template to generate highly ordered macroporous hydroxyapatite bioceramics composed of close-packed hollow spherical pores with interconnected channels. The template has advantages for the preparation of ordered materials.

  11. Soil Macropore Structure Characterized by X-Ray Computed Tomography

    Institute of Scientific and Technical Information of China (English)

    FENG Jie; ZHANG Jia-Bao; ZHU An-Ning; BI Jing-Wei

    2003-01-01

    Undisturbed soil core with many macropores and disturbed soil core with only one macropore (diameter is 10 mm) were probed by x-ray computed tomography (CT). The size, number, shape and continuity of macropores in the transverse and vertical sections of soil were characterized using CT scanning images. The probability densities of macropores in the transverse section of soil core exhibited a logarithmic Γ distribution.Results indicated that CT scanning was a promising nondestructive method for characterizing macropores in soils.

  12. Scaling hydraulic properties of a macroporous soil

    Science.gov (United States)

    Mohanty, Binayak P.

    1999-06-01

    Macroporous soils exhibit significant differences in their hydraulic properties for different pore domains. Multimodal hydraulic functions may be used to describe the characteristics of multiporosity media. I investigated the usefulness of scaling to describe the spatial variability of hydraulic conductivity (K(-h)) functions of a macroporous soil in Las Nutrias, New Mexico. Piecewise-continuous hydraulic conductivity functions suitable for macroporous soils in conjunction with a hybrid similar media-functional normalization scaling approach were used. Results showed that gravity-dominated flow and the related hydraulic conductivity (K(minus;h) functions of the macropore region are more readily scalable than capillary-dominated flow properties of the mesopore and micropore regions. A possible reason for this behavior is that gravity-dominated flow in the larger pores is mostly influenced by the pore diameter which remains more uniform as compared to tortuous mesopores and micropores with variable neck and body sizes along the pore length.

  13. Deep Ultraviolet Macroporous Silicon Filters Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR Phase I proposal describes a novel method to make deep and far UV optical filters from macroporous silicon. This type of filter consists of an array of...

  14. Macroporous ultramicroelectrodes for improved electroanalytical measurements.

    Science.gov (United States)

    Szamocki, Rafael; Velichko, Alexandra; Holzapfel, Christian; Mücklich, Frank; Ravaine, Serge; Garrigue, Patrick; Sojic, Neso; Hempelmann, Rolf; Kuhn, Alexander

    2007-01-15

    Recent work on the preparation of highly organized macroporous electrodes and nanoporous ultramicroelectrodes has been combined and extended to elaborate macroporous ultramicroelectrodes (UMEs) by template synthesis using colloidal crystals and following two different and complementary methods. On the one hand, arched porous UMEs were prepared, and on the other hand, cylindrical porous UMEs were obtained by using cavity UMEs. These macroporous UMEs have an active surface area which is up to 2 orders of magnitude higher compared to that of a classical disk UME as characterized by cyclic voltammetry. To study their analytical performance, the macroporous UMEs have been modified with a redox-active thiol and also a model bioelectrocatalytical system containing a redox mediator, a cofactor, and glucose-dehydrogenase. In both cases the electrochemical signal is amplified by up to 2 orders of magnitude, which increases significantly the analytical performance of such electrodes and therefore opens up new applications for this kind of miniaturized electrochemical system.

  15. Carbon nanofibers encapsulated in macropores in silicon

    Energy Technology Data Exchange (ETDEWEB)

    Starkov, V.; Red' kin, A. [Institute of Microelectronics Technology and High Purity Materials, RAS, Institutskaya str. 6, Chernogolovka 142432 (Russian Federation)

    2007-05-15

    This work reports on the development of fuel cells electrodes with a porous silicon structure and carbon nanofibers encapsulated in macropores in silicon. It is demonstrated that decomposition of carbon on a Ni catalyst deposited on the pore walls can be used to create a homogeneous carbon nanotube layer that dramatically increases the specific surface area while simultaneously reducing the resistivity of the macroporous silicon layer. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  16. Ordered macroporous bimetallic nanostructures: design, characterization, and applications.

    Science.gov (United States)

    Lu, Lehui; Eychmüller, Alexander

    2008-02-01

    Ordered porous metal nanomaterials have current and future potential applications, for example, as catalysts, as photonic crystals, as sensors, as porous electrodes, as substrates for surface-enhanced Raman scattering (SERS), in separation technology, and in other emerging nanotechnologies. Methods for creating such materials are commonly characterized as "templating", a technique that involves first the creation of a sacrificial template with a specific porous structure, followed by the filling of these pores with desired metal materials and finally the removal of the starting template, leaving behind a metal replica of the original template. From the viewpoint of practical applications, ordered metal nanostructures with hierarchical porosity, namely, macropores in combination with micropores or mesopores, are of particular interest because macropores allow large guest molecules to access and an efficient mass transport through the porous structures is enabled while the micropores or mesopores enhance the selectivity and the surface area of the metal nanostructures. For this objective, colloidal crystals (or artificial opals) consisting of three-dimensional (3D) long-range ordered arrays of silica or polymer microspheres are ideal starting templates. However, with respect to the colloidal crystal templating strategies for production of ordered porous metal nanostructures, there are two challenging questions for materials scientists: (1) how to uniformly and controllably fill the interstitial space of the colloidal crystal templates and (2) how to generate ordered composite metal nanostructures with hierarchical porosity. This Account reports on recent work in the development and applications of ordered macroporous bimetallic nanostructures in our laboratories. A series of strategies have been explored to address the challenges in colloidal crystal template techniques. By rationally tailoring experimental parameters, we could readily and selectively design

  17. [Fracture of macroporous hydroxyapatite prosthesis].

    Science.gov (United States)

    Adetchessi, A T; Pech-Gourg, G; Metellus, P; Fuentes, S

    2012-12-01

    Different prosthesis implants are offered to perform a cranioplasty after a decompressive craniectomy when autologous bone graft cannot be used. The authors report the case of a 25-year-old man who benefited a unilateral decompressive craniectomy after a severe head trauma. Seven months later, a cranioplasty using custom macroporous hydroxyapatite prosthesis was performed. The postoperative course was marked by a generalized seizure leading to a traumatic head injury. The CT-scan showed a comminutive fracture of the prosthesis and an extradural hematoma. The patient underwent a removal of the fractured prosthesis and an evacuation of the extradural clot. The postoperative course was uneventful with a Glasgow outcome scale score at 5. A second cranioplasty using a polyether ether ketone (PEEK) implant was performed. Among cranioplasty prosthesis solutions, hydroxyapatite implants seem to have similar property to the bone. However, its weak mechanic resistance is an actual problem in patients susceptible to present generalized seizures with consecutive head impact. Hence, in patients with decompressive craniectomy who are exposed to potential brain injury, we favor the use of more resistant implant as PEEK prosthesis.

  18. A simple method for the production of large volume 3D macroporous hydrogels for advanced biotechnological, medical and environmental applications

    Science.gov (United States)

    Savina, Irina N.; Ingavle, Ganesh C.; Cundy, Andrew B.; Mikhalovsky, Sergey V.

    2016-02-01

    The development of bulk, three-dimensional (3D), macroporous polymers with high permeability, large surface area and large volume is highly desirable for a range of applications in the biomedical, biotechnological and environmental areas. The experimental techniques currently used are limited to the production of small size and volume cryogel material. In this work we propose a novel, versatile, simple and reproducible method for the synthesis of large volume porous polymer hydrogels by cryogelation. By controlling the freezing process of the reagent/polymer solution, large-scale 3D macroporous gels with wide interconnected pores (up to 200 μm in diameter) and large accessible surface area have been synthesized. For the first time, macroporous gels (of up to 400 ml bulk volume) with controlled porous structure were manufactured, with potential for scale up to much larger gel dimensions. This method can be used for production of novel 3D multi-component macroporous composite materials with a uniform distribution of embedded particles. The proposed method provides better control of freezing conditions and thus overcomes existing drawbacks limiting production of large gel-based devices and matrices. The proposed method could serve as a new design concept for functional 3D macroporous gels and composites preparation for biomedical, biotechnological and environmental applications.

  19. Interconnected macroporous poly(ethylene glycol) cryogels as a cell scaffold for cartilage tissue engineering.

    Science.gov (United States)

    Hwang, Yongsung; Sangaj, Nivedita; Varghese, Shyni

    2010-10-01

    Macroporous networks of poly(ethylene glycol) (PEG) with interconnected pores can be created by cryogelation techniques. In this study, we describe the potential application of such PEG cryogels as scaffolds for cartilage tissue engineering. Three-dimensional macroporous cryogels were evaluated for chondrocyte growth and production of cartilage-specific extracellular matrix (ECM). Seeded primary bovine chondrocytes showed homogeneous distribution throughout the cryogels. DNA content suggests continuous cell proliferation over 4 weeks of in vitro culture. Analysis of the composition of cell-secreted ECM showed a culture-time-dependent increase in the amount of glycosaminoglycan and collagen. The production of ECM by chondrocytes was confirmed using scanning electron microscopy analysis. Further histological and immunohistological analysis of the cell-laden scaffold confirmed the presence of accumulated cartilage-specific ECM within the scaffold. The interconnected macroporous network promoted diffusion of cell-secreted matrix within the cryogels. Our results indicated that interconnected macroporous PEG cryogels successfully supported attachment, viability, proliferation, and biosynthetic activity of seeded chondrocytes.

  20. Macroporous Monolithic Polymers: Preparation and Applications

    Directory of Open Access Journals (Sweden)

    Cecilia Inés Alvarez Igarzabal

    2009-12-01

    Full Text Available In the last years, macroporous monolithic materials have been introduced as a new and useful generation of polymers used in different fields. These polymers may be prepared in a simple way from a homogenous mixture into a mold and contain large interconnected pores or channels allowing for high flow rates at moderate pressures. Due to their porous characteristics, they could be used in different processes, such as stationary phases for different types of chromatography, high-throughput bioreactors and in microfluidic chip applications. This review reports the contributions of several groups working in the preparation of different macroporous monoliths and their modification by immobilization of specific ligands on the products for specific purposes.

  1. Macroporous nanowire nanoelectronic scaffolds for synthetic tissues

    Science.gov (United States)

    Tian, Bozhi; Liu, Jia; Dvir, Tal; Jin, Lihua; Tsui, Jonathan H.; Qing, Quan; Suo, Zhigang; Langer, Robert; Kohane, Daniel S.; Lieber, Charles M.

    2012-11-01

    The development of three-dimensional (3D) synthetic biomaterials as structural and bioactive scaffolds is central to fields ranging from cellular biophysics to regenerative medicine. As of yet, these scaffolds cannot electrically probe the physicochemical and biological microenvironments throughout their 3D and macroporous interior, although this capability could have a marked impact in both electronics and biomaterials. Here, we address this challenge using macroporous, flexible and free-standing nanowire nanoelectronic scaffolds (nanoES), and their hybrids with synthetic or natural biomaterials. 3D macroporous nanoES mimic the structure of natural tissue scaffolds, and they were formed by self-organization of coplanar reticular networks with built-in strain and by manipulation of 2D mesh matrices. NanoES exhibited robust electronic properties and have been used alone or combined with other biomaterials as biocompatible extracellular scaffolds for 3D culture of neurons, cardiomyocytes and smooth muscle cells. Furthermore, we show the integrated sensory capability of the nanoES by real-time monitoring of the local electrical activity within 3D nanoES/cardiomyocyte constructs, the response of 3D-nanoES-based neural and cardiac tissue models to drugs, and distinct pH changes inside and outside tubular vascular smooth muscle constructs.

  2. Hierarchically Structured Monolithic ZSM-5 through Macroporous Silica Gel Zeolitization

    Institute of Scientific and Technical Information of China (English)

    Lei Qian; Zhao Tianbo; Li Fengyan; Zong Baoning; Tong Yangchuan

    2006-01-01

    The hierarchically structured ZSM-5 monolith was prepared through transforming the skeletons of the macroporous silica gel into ZSM-5 by the steam-assisted conversion method. The morphology and monolithic shapes of macroporous silica gel were well preserved. The hierarchically structured ZSM-5 monolith exhibited the hierarchical porosity, with mesopores and macropores existing inside the macroporous silica gel, and micropores formed by the ZSM-5. The products have been characterized properly by using the XRD, SEM and N2 adsorption-desorption methods.

  3. Facile synthesis of a Cu-based MOF confined in macroporous carbon hybrid material with enhanced electrocatalytic ability.

    Science.gov (United States)

    Zhang, Yufan; Bo, Xiangjie; Luhana, Charles; Wang, Huan; Li, Mian; Guo, Liping

    2013-08-07

    The Cu-based MOF loaded on macroporous carbon (MPC) creates novel Cu-MOF-MPC hybrids for the first time. The obtained Cu-MOF-MPC composites are used as electrocatalysts for the oxidation of NADH and reduction of H2O2 in neutral solution.

  4. Quantification of small-scale physicochemical properties of intact macropore surfaces in Bt-horizons of Luvisols

    Science.gov (United States)

    Leue, Martin; Gerke, Horst H.

    2017-04-01

    During preferential flow in structured soils, the interaction of percolating water and reactive solutes with the soil matrix is mostly restricted to surfaces of preferential flow paths which affect mass exchange processes by the physical and chemical properties. These properties can strongly differ from bulk soil properties with respect to texture, organic matter (OM), pore geometry, density, and porosity. The aim of our work was to identify and to quantify effective macropore properties which concurrently are appropriate to represent physical mechanisms for entire soil horizons with respect to preferential flow. We studied physical and chemical properties of intact surfaces of soil aggregates, biopores (root channels, worm burrows), and coated cracks from Luvisol Bt-horizons. The spatial distribution of the OM composition and related physical properties such as wettability, the organic carbon content, and the cation exchange capacity of these macropores as characterized by DRIFT spectroscopy and complementary techniques were found spatially distributed at the mm-scale. Differences could be observed for loess and glacial till as parent materials, land use, and macropore types, in particular for cracks and biopores. The geometrical properties (pore volume, diameter, surfaces area, connectivity, and tortuosity) of all potentially available macropores, in particular the differences between cracks and biopores, were quantified in large soil columns using X-ray computed tomography (µCT). Dye tracer experiments at the cm-to-m-scale showed substrate-specific and macropore-specific differences between the active preferential flow paths. In a summarizing step we aim to combine the chemical and physical surface properties with the geometrical properties of the macropores in order to estimate the effects of the surface properties on preferential flow in Bt-horizons. The specific surface areas and chemical compositions may help explain differences in the staining patterns

  5. Pesticide leaching in macroporous clay soils: field experiment and modeling

    NARCIS (Netherlands)

    Scorza Júnior, R.P.

    2002-01-01

    Keywords : pesticide leaching, macropores, preferential flow, preferential transport, cracked clay soil, pesticide leaching models, groundwater contamination, inverse modeling, bentazone and imidacloprid. The presence of macropores (i.e. shrinkage c

  6. Preparation of ZIF-8 membranes supported on macroporous carbon tubes via a dipcoating-rubbing method

    Science.gov (United States)

    Kong, Lingyin; Zhang, Xiongfu; Liu, Haiou; Wang, Tonghua; Qiu, Jieshan

    2015-02-01

    In the present work, a new dipcoating-rubbing method (DCRM) was developed to seed the surface of a macroporous carbon tube with a mixture of graphite and ZIF-8 nanoparticles. A continuous and low-defect ZIF-8 membrane was well formed on the seeded carbon tube by solvothermal growth. The DCRM involved a two-step process including first dipcoating a thin layer of the composite of graphite and ZIF-8 nanoparticles on the carbon surface and then rubbing the layer to form a stable seed layer. The graphite in the composite acting as binding agent could have two functions: (1) anchoring the ZIF-8 seeds onto the carbon surface; (2) smoothing the coarse surface of the macroporous carbon tube, thus forming a high quality ZIF-8 membrane. The as-prepared membrane was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and single gas permeation and was proved to be continuous and low-defect. The ideal selectivity of H2/CH4 is 7.9 with a H2 permeance of 7.15×10-8 mol Pa-1 s-1 m-2, which is higher than its corresponding Knudsen diffusion value. We could therefore expect the ZIF-8 membrane supported on macroporous tubular carbon to achieve a high selectivity of H2 over CH4 through a molecular sieving effect.

  7. Preparation of spherical macroporous poly(lactic-co-glycolic acid) for bone tissue regeneration.

    Science.gov (United States)

    Bian, Chunhui; Lin, Huiming; Li, Xiaofeng; Ma, Jie; Jiang, Pingping; Qu, Fengyu

    2015-02-01

    Spherical macroporous poly(lactic-co-glycolic acid) (PLGA) has been synthesised using an emulsion method. Polyvinyl alcohol and Pluronic F127 have been used as dispersing and porogen agent, respectively. The diameter of the spherical PLGA is about 20 μm and the pore size of the PLGA macroporous is about 2-2.5 μm observed by scanning electron microscopy. After immersing in simulated body fluid, the PLGA materials can induce the formation of hydroxyapatite (HAP) on their surface. The HAP-PLGA has been obtained and used as the host for drug release. Furthermore, the drug-loaded samples possess the various drug release performance by adjusting the thickness of the HAP layer. This highly satisfied composite material is expected to be promising in the applications in tissue regeneration engineering.

  8. Conjunction of Conducting Polymer Nanostructures with Macroporous Structured Graphene Thin Films for High-Performance Flexible Supercapacitors.

    Science.gov (United States)

    Memon, Mushtaque A; Bai, Wei; Sun, Jinhua; Imran, Muhammad; Phulpoto, Shah Nawaz; Yan, Shouke; Huang, Yong; Geng, Jianxin

    2016-05-11

    Fabrication of hybridized structures is an effective strategy to promote the performances of graphene-based composites for energy storage/conversion applications. In this work, macroporous structured graphene thin films (MGTFs) are fabricated on various substrates including flexible graphene papers (GPs) through an ice-crystal-induced phase separation process. The MGTFs prepared on GPs (MGTF@GPs) are recognized with remarkable features such as interconnected macroporous configuration, sufficient exfoliation of the conductive RGO sheets, and good mechanical flexibility. As such, the flexible MGTF@GPs are demonstrated as a versatile conductive platform for depositing conducting polymers (CPs), e.g., polyaniline (PAn), polypyrrole, and polythiophene, through in situ electropolymerization. The contents of the CPs in the composite films are readily controlled by varying the electropolymerization time. Notably, electrodeposition of PAn leads to the formation of nanostructures of PAn nanofibers on the walls of the macroporous structured RGO framework (PAn@MGTF@GPs): thereafter, the PAn@MGTF@GPs display a unique structural feature that combine the nanostructures of PAn nanofibers and the macroporous structures of RGO sheets. Being used as binder-free electrodes for flexible supercapacitors, the PAn@MGTF@GPs exhibit excellent electrochemical performance, in particular a high areal specific capacity (538 mF cm(-2)), high cycling stability, and remarkable capacitive stability to deformation, due to the unique electrode structures.

  9. Fully Accessible Ag Nanoparticles within Three-dimensionally Ordered Macroporous SiO2

    Institute of Scientific and Technical Information of China (English)

    邬泉周; 尹强; 廖菊芳; 邓景衡; 李玉光

    2005-01-01

    A multi-step process was used for preparation of three-dimensionally ordered macroporous (3DOM) SiO2, in which fully accessible Ag nanoparticles are incorporated. The method involves the processes of assembly of polystyrene colloidal crystal, preparation of 3DOM SiO2, and incorporation of Ag nanoparticles within 3DOM SiO2 through in situ Tollens' reaction. XRD, SEM and EDXS determination show that the Ag particles deposited on the macroporous walls in nano dimension. The results indicate that lower concentration of silver ammoniate and for-maldehyde in the solution is favorable for forming a very narrow size distribution and uniform shape of nanoparticles. However, the higher the concentration of the solution and the more the loading times, the larger the possibility to form un-uniform particles. Ag nanoparticles can be sintered into larger and spheral particles by calcination at 600℃, but can resist sintering owing to their high dispersivity when loading amount is small. The study provided a simple approach to tailor Ag/3DOM SiO2 composite materials with desired morphology and size of Ag particles within the macropores.

  10. Macroporous synthetic hydroxyapatite bioceramics for bone substitute applications

    CSIR Research Space (South Africa)

    Thomas, ME

    1999-08-01

    Full Text Available An improved strategy is described for the manufacture of macroporous hydroxyapatite bioceramics for bone substitute applications. This is based on a modified fugitive phase technique, which allows production of relatively open, high-strength devices...

  11. Preparative Purification of Liriodendrin from Sargentodoxa cuneata by Macroporous Resin

    OpenAIRE

    Di-Hua Li; Yan Wang; Yuan-Shan Lv; Jun-Hong Liu; Lei Yang; Shu-Kun Zhang; Yu-Zhen Zhuo

    2015-01-01

    The preparative purification of liriodendrin from Sargentodoxa cuneata using macroporous resin combined with crystallization process was evaluated. The properties of adsorption/desorption of liriodendrin on eight macroporous resins were investigated systematically. X-5 resin was selected as the most suitable medium for liriodendrin purification. The adsorption of liriodendrin on X-5 resin fitted well with the pseudo-second-order kinetic model and Langmuir isotherm model. Dynamic adsorption/de...

  12. Preparation of Chitosan Nanocompositeswith a Macroporous Structure by Unidirectional Freezing and Subsequent Freeze-Drying

    Directory of Open Access Journals (Sweden)

    Inmaculada Aranaz

    2014-11-01

    Full Text Available Chitosan is the N-deacetylated derivative of chitin, a naturally abundant mucopolysaccharide that consists of 2-acetamido-2-deoxy-β-d-glucose through a β (1→4 linkage and is found in nature as the supporting material of crustaceans, insects, etc. Chitosan has been strongly recommended as a suitable functional material because of its excellent biocompatibility, biodegradability, non-toxicity, and adsorption properties. Boosting all these excellent properties to obtain unprecedented performances requires the core competences of materials chemists to design and develop novel processing strategies that ultimately allow tailoring the structure and/or the composition of the resulting chitosan-based materials. For instance, the preparation of macroporous materials is challenging in catalysis, biocatalysis and biomedicine, because the resulting materials will offer a desirable combination of high internal reactive surface area and straightforward molecular transport through broad “highways” leading to such a surface. Moreover, chitosan-based composites made of two or more distinct components will produce structural or functional properties not present in materials composed of one single component. Our group has been working lately on cryogenic processes based on the unidirectional freezing of water slurries and/or hydrogels, the subsequent freeze-drying of which produce macroporous materials with a well-patterned structure. We have applied this process to different gels and colloidal suspensions of inorganic, organic, and hybrid materials. In this review, we will describe the application of the process to chitosan solutions and gels typically containing a second component (e.g., metal and ceramic nanoparticles, or carbon nanotubes for the formation of chitosan nanocomposites with a macroporous structure. We will also discuss the role played by this tailored composition and structure in the ultimate performance of these materials.

  13. Effect of TiO2 doping on the characteristics of macroporous Al2O3/TiO2 membrane supports

    NARCIS (Netherlands)

    Qi, H.; Fan, Y.; Xing, W.; Winnubst, Aloysius J.A.

    2010-01-01

    A cost-effective tubular macroporous ceramic support consisting of alumina and titania was prepared by extrusion and subsequent heat treatment. An Al2O3/TiO2 composite support with high porosity (41.4%), an average pore size of 6.8 μm and sufficient mechanical strength (32.7 MPa) was obtained after

  14. Purification of total flavonoids from loquat leaves by macroporous resin and corresponding antioxidant capacity

    OpenAIRE

    Huang Suhua; Lin Biaosheng; Li Binbin; Tan Bi; Hong Yanping

    2017-01-01

    Flavonoids is one of the major active compounds in loquat leaves. In this study, the purification process of total flavonoids in loquat leaves by macroporous resin was researched and the antioxidant activity of total flavonoids was determined. The active compounds were extracted by 95% ethanol, and the total flavonoids was purified by macroporous resin. Comparing the static and dynamic adsorption and desorption characters of 6 macroporous resin, the best type of macroporous resin was determin...

  15. Molecularly imprinted macroporous monolithic materials for protein recognition

    Institute of Scientific and Technical Information of China (English)

    Qi Liang Deng; Yan Li Li; Li Hua Zhang; Yu Kui Zhang

    2011-01-01

    Synthetic materials that can specifically recognize proteins will find wide application in many fields. In this report, bovine serum albumin was chosen as the template protein. Acrylamide and N, N'-methylenebisacrylamide were employed as the functional and cross-linker monomers, respectively. Molecularly imprinted macroporous monolithic materials that can preferentially bind the template protein in an aqueous environment were prepared by combination of molecular imprinting technique and freezing/thawing preparation method. The resulted imprinted macroporous monolithic columns were evaluated by utilizing as stationary phase in high performance liquid chromatography and solid-phase extraction materials. The experimental results indicated that the imprinted macroporous monolithic column exhibited good recognition for template protein, as compared with the control protein (hemoglobin), whereas the non-imprinted polymer (prepared under the same conditions except without addition template protein) had no selective properties.

  16. Fabrication of macroporous carbonate apatite foam by hydrothermal conversion of alpha-tricalcium phosphate in carbonate solutions.

    Science.gov (United States)

    Wakae, H; Takeuchi, A; Udoh, K; Matsuya, S; Munar, M L; LeGeros, R Z; Nakasima, A; Ishikawa, K

    2008-12-15

    Bone consists of a mineral phase (carbonate apatite) and an organic phase (principally collagen). Cancellous bone is characterized by interconnecting porosity necessary for tissue ingrowth and nourishment of bone cells. The purpose of the present study was to fabricate macroporous carbonate apatite (CAP) blocks with interconnecting porosity as potential bone substitute biomaterials by hydrothermal conversion of alpha-TCP foam in carbonate solution. The fabrication of the macroporous CAP was accomplished in two steps: (1) preparation of alpha-TCP foams using polyurethane foams as templates, and (2) hydrothermal conversion at 200 degrees C of alpha-TCP foam in the presence of ammonium carbonate solutions of different concentrations. The maximum carbonate content of the resultant CAP foam was approximately 7.4 wt %. The mean porosity of the CAP foam was as high as 93 vol %. The macroporous CAP blocks or granules prepared in this manner has properties similar to that of bone in mineral composition and in having interconnecting macroporosity necessary for osteoconductivity and tissue ingrowth. On the basis of composition and interconnecting macroporosity, the CAP foam materials could be ideal biomaterials for bone repair and as scaffolds for tissue engineering.

  17. 三维有序大孔复合材料H6P2W18O62/TiO2制备与多模式光催化%Preparation of three-dimensionally ordered macroporous composite H6P2W18O62/TiO2 and its photocatalytic degradation under multiple modes

    Institute of Scientific and Technical Information of China (English)

    齐云英; 李莉; 张文治; 柳迪; 王双

    2016-01-01

    Three-dimensionally ordered macroporous composite 3DOM H6 P2 W18 O62/TiO2 was prepared by the impregnation method methanol combined with polystyrene(PS)latex sphere templating technique and 3DOM TiO2 synthezed by methanol vacuum method as the canier. The phase structures,chemical composition,optical absorption properties and surface physicochemical properties were well-characterized via Fourier transform infrared spectrum(FT-IR),X-ray diffraction(XRD),UV-vis diffuse reflex spectrum(Uv-vis/DRS),X-ray photoelectron spectroscopy(XPS),Scanning electron microscopy(SEM)and N2 adsorption-desorption tests. The results showed that the primary Dawson structures remained intact in the composites,simultaneously;3DOM H6P2W18O62/TiO2 had anatase crystalline structure. The photocatalytic activities of the synthesized composite 3DOM H6P2W18O62/TiO2 were studied by the methyl orange as model molecule under multi-mode photocatalytic degradation including ultraviolet light,visible light and microwave radio. Results showed that 3DOM H6P2W18O62/TiO2 showed the best photocatalytic performance under the UV irradiation,moreover, which exhibited superior photocatalytic degradation for dyes under microwave-assisted and visible photocatalytic degradation.%采用聚苯乙烯(PS)微球做模板,以甲醇真空法制备的三维有序大孔材料(3DOM)TiO2为载体,通过浸渍法将其与多酸H6 P2 W18 O62复合制备成3DOM H6P2W18O62/TiO2.通过傅立叶-红外光谱(FT-IR)、X射线粉末衍射(XRD)、紫外-可见漫反射吸收光谱(UV-Vis/DRS)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)和N2吸附-脱附等表征手段对所合成材料的光吸收性质、结构和晶相进行了表征,结果表明,3DOM H6P2W18O62/TiO2复合材料中多酸仍然保留其Dawson结构,且晶型结构以TiO2锐钛矿结构为主.为考察所合成纳米复合材料3DOM H6P2W18O62/TiO2的光催化活性,选用甲基橙为模型分子,在紫外光、可见光和微波辅射等多模式作

  18. Fabrication and Characteristics of Macroporous TiO2 Photocatalyst

    Directory of Open Access Journals (Sweden)

    Guiyun Yi

    2014-01-01

    Full Text Available Macroporous TiO2 photocatalyst was synthesized by a facile nanocasting method using polystyrene (PS spherical particles as the hard template. The synthesized photocatalyst was characterized by transmission electron microscope (TEM, scanning electron microscopy (SEM, thermogravimetry-differential thermogravimetry (TG-DTG, X-ray diffraction (XRD, and N2-sorption. TEM, SEM, and XRD characterizations confirmed that the macroporous TiO2 photocatalyst is composed of anatase phase. The high specific surface area of 87.85 m2/g can be achieved according to the N2-sorption analysis. Rhodamine B (RhB was chosen as probe molecule to evaluate the photocatalytic activity of the TiO2 catalysts. Compared with the TiO2 materials synthesized in the absence of PS spherical template, the macroporous TiO2 photocatalyst sintered at 500°C exhibits much higher activity on the degradation of RhB under the UV irradiation, which can be assigned to the well-structured macroporosity. The macroporous TiO2 material presents great potential in the fields of environmental remediation and energy conversion and storage.

  19. Dye tracer infiltration technique to investigate macropore flow paths in Maka Mountain, Yunnan Province, China

    Institute of Scientific and Technical Information of China (English)

    张家明; 徐则民

    2016-01-01

    In order to investigate the differences of macropores vertical distribution under different surface plants, and to assess the influences of root systems, organic matter and texture on macropore flow paths, two dye tracer infiltration experiments were performed in slopes under two different plants (Campylotropis polyantha (Franch.) Schindl vs.Cynodon dactylon(Linn.) Pers). Dye tracer infiltration experiments with field observations and measurements of soil properties were combined. Results show that the discrepancy in macropores distribution between two slopes under different plants is significant. Root systems have significant effects on macropore flow paths distribution and the effect become more pronounced as the diameter of roots become larger. Organic matter and stone are important factors to affect macropores distribution. Root-soil interface, inter-aggregate macropore and stone-soil interface are important macropore flow paths in well vegetated slopes.

  20. Delivery of ibuprofen by natural macroporous sporopollenin exine capsules extracted from Phoenix dactylifera L.

    Science.gov (United States)

    Alshehri, Saad M; Al-Lohedan, Hamad A; Chaudhary, Anis Ahmad; Al-Farraj, Eida; Alhokbany, Norah; Issa, Zuheir; Alhousine, Sami; Ahamad, Tansir

    2016-06-10

    Sporopollenin macroporous capsules (SMCs) were extracted from date palm (Phoenix dactylifera L.) spores and coated by a natural polymer composite (chitosan with glutaraldehyde). The polymer coated macroporous capsules SMC@poly were used in the in vitro-controlled delivery of ibuprofen. The materials obtained were characterized through spectral, thermal, scanning electron microscopy (SEM), X-ray diffraction (XRD), and nitrogen adsorption-desorption isotherms. The IBU loading and releasing was studied by investigating the changes in various factors such as pH, temperature, and initial concentration. The results revealed that the loading of IBU increased when the concentration of IBU was decreased, following the Langmuir adsorption isotherm. The maximum loading of the IBU was observed at pH6.0 (97.2%, with 50mg/mL). The releasing results indicate that IBU was released faster when the pH was changed from 1.4 to 7.4. In addition, the cytotoxicity of the SMC, SMC@poly, and SMC@poly-IBU were tested against human intestinal Caco-2 cell line using MTT assay, and the results revea'led that all the materials in this study were biocompatible.

  1. Polymeric macroporous formulations for the control release of mosquitocidal Bacillus sphaericus ISPC-8.

    Science.gov (United States)

    Tripathi, Anuj; Hadapad, Ashok B; Hire, Ramesh S; Melo, Jose S; D'Souza, Stanislaus F

    2013-12-10

    Bio-polymeric mosquitocidal formulations were developed for the control release of Bacillus sphaericus ISPC-8 by the immobilization of its spore-crystal complex onto the macroporous polymeric matrices. The biodegradable formulations were synthesized at sub-zero temperature using natural polymeric substrates like agarose, alginate, cellulose, non-adsorbent cotton, wooden cork powder and also magnetite nanoparticles. The obtained polymeric matrices were morphologically characterized, which showed 85-90% porosity, uniform pores distribution, high permeability and controlled degradation (19-30%) in 4 weeks depending upon the composition of formulations. Further, the polymeric macroporous formulations were tested for persistence of mosquitocidal activity against Culex quinquefasciatus larvae. Unformulated B. sphaericus ISPC-8 spores retained 54% of larvicidal activity after 7 days, which completely reduced after 35 days of treatment. However, the immobilized B. sphaericus spores in agarose-alginate formulations showed high larvicidal activity on day 7 and retained about 45% activity even after 35 days of treatments. Studies on UV-B and pH dependent inactivation of toxins and spore viability showed that these formulations were significantly protecting the spores as compared to the unformulated spores, which suggest its potential application for the mosquito control program.

  2. Preparative Purification of Liriodendrin from Sargentodoxa cuneata by Macroporous Resin.

    Science.gov (United States)

    Li, Di-Hua; Wang, Yan; Lv, Yuan-Shan; Liu, Jun-Hong; Yang, Lei; Zhang, Shu-Kun; Zhuo, Yu-Zhen

    2015-01-01

    The preparative purification of liriodendrin from Sargentodoxa cuneata using macroporous resin combined with crystallization process was evaluated. The properties of adsorption/desorption of liriodendrin on eight macroporous resins were investigated systematically. X-5 resin was selected as the most suitable medium for liriodendrin purification. The adsorption of liriodendrin on X-5 resin fitted well with the pseudo-second-order kinetic model and Langmuir isotherm model. Dynamic adsorption/desorption tests were performed using a glass column packed with X-5 resin to optimize the separation process of liriodendrin. After one treatment with X-5 resin, the content of liriodendrin in the product was increased 48.73-fold, from 0.85% to 41.42%, with a recovery yield of 88.9%. 97.48% liriodendrin was obtained by further crystallization and determined by HPLC. The purified product possessed strong antioxidant activity. In conclusion, purification of liriodendrin might expend its further pharmacological researches and further applications in pharmacy.

  3. Kinetic and thermodynamic studies of sulforaphane adsorption on macroporous resin.

    Science.gov (United States)

    Yuanfeng, Wu; Lei, Zhang; Jianwei, Mao; Shiwang, Liu; Jun, Huang; Yuru, You; Lehe, Mei

    2016-08-15

    The adsorption equilibrium, kinetic and thermodynamic of sulforaphane (SF) adsorption onto macroporous resin in aqueous phase were studied. The SP850 resin was screened as the appropriate resin for SF purification. From the equilibrium studies, the Redlich-Peterson model was found to be the best for description of the adsorption behavior of SF onto SP850 resin, followed by the Freundlich model and the Langmuir model. Batch equilibrium experiments demonstrated that, in the examined temperature range, the equilibrium adsorption capacity of SP850 resin decreased with increasing adsorption temperature. Thermodynamics studies indicated that the adsorption of SF was a physical, exothermic, and spontaneous process. The adsorption kinetics revealed that the pseudo-second-order kinetic model was suitable to characterize the kinetics of adsorption of SF onto SP850. Finally, the intra-particle diffusion model demonstrated that SF diffused quickly into macropores, and that diffusion slowed down in the meso- and micropores.

  4. Preparation and Properties of Macroporous Silicon Nitride Ceramics by Gelcasting and Carbonthermal Reaction

    Institute of Scientific and Technical Information of China (English)

    Wen ZHANG; Hongjie WANG; Zhihao JIN

    2005-01-01

    Macroporous silicon nitride (Si3N4) ceramics with high strength, uniform structure and relatively high porosity were obtained by gelcasting and carbonthermal reaction in a two-step sintering technique. Microstructure and composition were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction(XRD). Open porosity, pore size distribution and basic mechanical performance were measured by Archimedes method,mercury intrusion porosimetry and three-point bending methods, respectively. SEM and TEM results revealed that pores were formed by elongated β-Si3N4. SADP measurement proved the formation of SiC particles. The SiC granules were beneficial for the formation of high ratio elongated β-Si3N4, and at proper amount, they also acted as reinforcement phase. Thermodynamic analysis indicated that the mechanisms of the reactions were mainly associated with liquid-solid reaction and gas-liquid reaction.

  5. Macroporous bioceramics: a remarkable material for bone regeneration.

    Science.gov (United States)

    Lew, Kien-Seng; Othman, Radzali; Ishikawa, Kunio; Yeoh, Fei-Yee

    2012-09-01

    This review summarises the major developments of macroporous bioceramics used mainly for repairing bone defects. Porous bioceramics have been receiving attention ever since their larger surface area was reported to be beneficial for the formation of more rigid bonds with host tissues. The study of porous bioceramics is important to overcome the less favourable bonds formed between dense bioceramics and host tissues, especially in healing bone defects. Macroporous bioceramics, which have been studied extensively, include hydroxyapatite, tricalcium phosphate, alumina, and zirconia. The pore size and interconnections both have significant effects on the growth rate of bone tissues. The optimum pore size of hydroxyapatite scaffolds for bone growth was found to be 300 µm. The existence of interconnections between pores is critical during the initial stage of tissue ingrowth on porous hydroxyapatite scaffolds. Furthermore, pore formation on β-tricalcium phosphate scaffolds also allowed the impregnation of growth factors and cells to improve bone tissues growth significantly. The formation of vascularised tissues was observed on macroporous alumina but did not take place in the case of dense alumina due to its bioinert nature. A macroporous alumina coating on scaffolds was able to improve the overall mechanical properties, and it enabled the impregnation of bioactive materials that could increase the bone growth rate. Despite the bioinertness of zirconia, porous zirconia was useful in designing scaffolds with superior mechanical properties after being coated with bioactive materials. The pores in zirconia were believed to improve the bone growth on the coated system. In summary, although the formation of pores in bioceramics may adversely affect mechanical properties, the advantages provided by the pores are crucial in repairing bone defects.

  6. Ordered coalescence of nanocrystals: a path to strong macroporous nanoceramics

    Energy Technology Data Exchange (ETDEWEB)

    Shen Zhijian; Xiong Yan [Berzelii Center EXSELENT for Porous Materials and Department of Materials and Environmental Chemistry, Arrhenius Laboratory, Stockholm University, Stockholm S-106 91 (Sweden); Hoeche, Thomas [Leibniz-Institut fuer Oberflaechenmodifizierung e.V., Permoserstrasse 15, Leipzig D-04318 (Germany); Salamon, David [Membrane Technology Group, University of Twente, PO Box 217, 7500 AE Enschede (Netherlands); Fu Zhengyi [State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070 (China); Belova, Lyubov, E-mail: shen@mmk.su.se [Department of Materials Science and Engineering, Royal Institute of Technology, Stockholm S-100 44 (Sweden)

    2010-05-21

    A versatile approach for integrating two apparently conflicting physical properties, high porosity and high mechanical strength, in polycrystalline bulks is established and demonstrated for the case of alumina ceramics. Macroporous alumina nanoceramics are synthesized by stimulating coalescence-mediated necking, which enables the formation of strong crystallographically coherent necks between adjacent grains. The work places a general emphasis on manipulating crystal growth on the nanoscale and on preparing highly porous polycrystalline bulk ceramics with improved mechanical rigidity.

  7. THE SYNTHESIS OF MACROPOROUS CROSSLINKED POLYSTYRENE AMIDOPHOSPHONIC ACID

    Institute of Scientific and Technical Information of China (English)

    HE Binlin; WANG Linfu; CHEN Weizhu

    1984-01-01

    A series of macromolecular copolymers of styrene and divinyl-benzene were prepared in the presence of iso-octanol or 2-ethyl butyl alcohol. The factors which affected the physical structures of the copolymer were discussed. The macroporous amido-phosphonic acid resin was obtained after the acetylation, phosphonylation and amination of the crosslinked polystyrene. The factors which affected each reaction were studied and the change of physical structures of the copolymer were discussed.

  8. Macropore-mesopore model of water flow through aggregated porous media

    Energy Technology Data Exchange (ETDEWEB)

    Fong, L.; Appelbaum, H.R.

    1980-12-01

    A combined, one-dimensional, macropore-mesopore, hydrologic model was developed for simulating water flow through soils for analysis of data related to water and chemical flow in soils. Flows within the macroporous system as well as interactive flows between macroporous and mesoporous systems were modeled. Computer subroutines were written and incorporated into the existing one-dimensional Terrestrial Ecosystem Hydrologic Model (TEHM) developed at ORNL. Simulation showed that macropore flow effects are important during heavy precipitation and are more significant in soils of comparatively low hydraulic conductivity (5 to 10 cm/d). Increased drainage and decreased lateral flow result from the addition of the macropore model. The effect was more pronounced in soils of large macroporosity. Preliminary results indicate that the model is insensitive to geometrical properties of macropores.

  9. Amperometric carbohydrate antigen 19-9 immunosensor based on three dimensional ordered macroporous magnetic Au film coupling direct electrochemistry of horseradish peroxidase

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Qi [College of Sciences, Nanjing Tech University, Nanjing 211816 (China); Chen, Xiaojun, E-mail: chenxj_njut@126.com [College of Sciences, Nanjing Tech University, Nanjing 211816 (China); State Key Laboratory of Materials-Oriented Chemical Engineering, Nanjing Tech University, Nanjing 210009 (China); Tang, Yin [Zhangjiagang Hospital of Traditional Chinese Medicine, Zhangjiagang 215600 (China); Ge, Lingna; Guo, Buhua [College of Sciences, Nanjing Tech University, Nanjing 211816 (China); Yao, Cheng, E-mail: yaochengnjut@163.com [College of Sciences, Nanjing Tech University, Nanjing 211816 (China)

    2014-03-01

    Highlights: • Three dimensional ordered macroporous magnetic electrode was newly used in electrochemical immunosensor. • The large surface area of macroporous magnetic electrode could improve the immobilized amount of antibody. • Au nanoparticles functionalized SBA-15 was used to immobilize enzyme labeled Ab₂ and enzyme. • Macroporous magnetic electrode and Au nanoparticles composite facilitated the direct electron transfer of enzyme. • The immunoassay avoided adding electron transfer mediator, simplifying the procedure. Abstract: A sandwich-type electrochemical immunosensor for the detection of carbohydrate antigen 19-9 (CA 19-9) antigen based on the immobilization of primary antibody (Ab₁) on three dimensional ordered macroporous magnetic (3DOMM) electrode, and the direct electrochemistry of horseradish peroxidase (HRP) that was used as both the label of secondary antibody (Ab₂) and the blocking reagent. The 3DOMM electrode was fabricated by introducing core–shell Au–SiO₂@Fe₃O₄ nanospheres onto the surface of three dimensional ordered macroporous (3DOM) Au electrode via the application of an external magnet. Au nanoparticles functionalized SBA-15 (Au@SBA-15) was conjugated to the HRP labeled secondary antibody (HRP-Ab₂) through the Au–SH or Au–NH₃⁺ interaction, and HRP was also used as the block reagent. The formation of antigen–antibody complex made the combination of Au@SBA-15 and 3DOMM exhibit remarkable synergistic effects for accelerating direct electron transfer (DET) between HRP and the electrode. Under the optimal conditions, the DET current signal increased proportionally to CA 19-9 concentration in the range of 0.05 to 15.65 U mL⁻¹ with a detection limit of 0.01 U mL⁻¹. Moreover, the immunosensor showed high selectivity, good stability, satisfactory reproducibility and regeneration. Importantly, the developed method was used to assay clinical serum specimens, achieving a good relation with those obtained from

  10. [Sizes of soil macropores and related main affecting factors on a vegetated basalt slope].

    Science.gov (United States)

    Guan, Qi; Xu, Ze-Min; Tian, Lin

    2013-10-01

    The landslide on vegetated slopes caused by extreme weather has being increased steadily, and the preferential flow in soil macropores plays an important role in the landslide. By using water breakthrough curve and Poiseuille equation, this paper estimated the radius range, amount, and average volume of soil macropores on a vegetated basalt slope of Maka Mountain, Southwest China, and analyzed the distribution of the soil macropores and the main affecting factors. In the study area, the radius of soil macropores ranged from 0.3 to 1.8 mm, mainly between 0.5 and 1.2 mm. The large-radius macropores (1.4-1.8 mm) were lesser, while the small-radius macropores (< 1.4 mm) were more. With the development of soil profile, soil macropores were more in upper layers and lesser in deeper layers. The average volume of the macropores contributed 84.7% to the variance of steady effluent rate. Among the factors affecting the average volume of the large macropores, vegetations root mass had a linear relationship, with the correlation coefficient being 0.70, and soil organic matter content also had a linear relationship, with the correlation coefficient being 0.64.

  11. [Macropore characteristics and its relationships with the preferential flow in broadleaved forest soils of Simian Mountains].

    Science.gov (United States)

    Wang, Wei; Zhang, Hong-jiang; Cheng, Jin-hua; Wu, Yu-he; Du, Shi-cai; Wang, Ran

    2010-05-01

    Brilliant blue dyeing and water breakthrough curve were applied to study the number and distribution of macropores and their relations to the preferential flow in typical sub-tropic broad-leaved forest soils of Simian Mountains. The radii of the macropores were mainly between 0. 3 and 3.0 mm, with the macroporosities in the range of 6.3% to 10.5%, and the macropores were always distributed in aggregation with increasing soil depth. The number of the macropores in each radius interval of dye-stained areas was tenfold increase than that of blank areas. The number of the macropores with radius larger than 0.3 mm, especially larger than 1.5 mm, was the most important factor affecting the occurrence of preferential flow. Significant correlations were found between the number of macropores and the water steady effluent volume, with the highest correlation coefficients of 0.842 and 0.879 for the radii intervals of 0.7-1.5 mm and 1.5-3.0 mm, respectively. Macro-pore continuity in dye-stained areas was better than that in blank areas, especially in the radius interval of 1.5-3.0 mm, with the biggest difference of 78.31%. In dye-stained areas, the number of macropores decreased gradually with soil depth. The filler-like distribution of macropores formed an effective water pressure gradient, which resulted in the preferential transport of water.

  12. Fabrication of macroporous cement scaffolds using PEG particles: In vitro evaluation with induced pluripotent stem cell-derived mesenchymal progenitors.

    Science.gov (United States)

    Sladkova, Martina; Palmer, Michael; Öhman, Caroline; Alhaddad, Rawan Jaragh; Esmael, Asmaa; Engqvist, Håkan; de Peppo, Giuseppe Maria

    2016-12-01

    Calcium phosphate cements (CPCs) have been extensively used in reconstructive dentistry and orthopedics, but it is only recently that CPCs have been combined with stem cells to engineer biological substitutes with enhanced healing potential. In the present study, macroporous CPC scaffolds with defined composition were fabricated using an easily reproduced synthesis method, with minimal fabrication and processing steps. Scaffold pore size and porosity, essential for cell infiltration and tissue ingrowth, were tuned by varying the content and size of polyethylene glycol (PEG) particles, resulting in 9 groups with different architectural features. The scaffolds were characterized for chemical composition, porosity and mechanical properties, then tested in vitro with human mesenchymal progenitors derived from induced pluripotent stem cells (iPSC-MPs). Biomimetic decellularized bone scaffolds were used as reference material in this study. Our manufacturing process resulted in the formation of macroporous monetite scaffolds with no residual traces of PEG. The size and content of PEG particles was found to affect scaffold porosity, and thus mechanical properties. Irrespective of pore size and porosity, the CPC scaffolds fabricated in this study supported adhesion and viability of human iPSC-MPs similarly to decellularized bone scaffolds. However, the architectural features of the scaffolds were found to affect the expression of bone specific genes, suggesting that specific scaffold groups could be more suitable to direct human iPSC-MPs in vitro toward an osteoblastic phenotype. Our simplistic fabrication method allows rapid, inexpensive and reproducible construction of macroporous CPC scaffolds with tunable architecture for potential use in dental and orthopedic applications.

  13. Surface functionalization of macroporous polymeric materials by treatment with air low temperature plasma.

    Science.gov (United States)

    Molina, R; Sole, I; Vílchez, A; Bertran, E; Solans, C; Esquena, J

    2013-04-01

    Polystyrene/divinylbenzene (PS-DVB) macroporous monoliths obtained using highly concentrated emulsions as templates show a superhydrophobic behaviour, restricting their potential technological applications, especially those related to adhesion and wetting. Air plasma treatments were carried out in order to modulate wetting properties, modifying the surface chemical composition of macroporous polystyrene/divinylbenzene materials. The superhydrophobic behaviour was rapidly suppressed by air plasma treatment, greatly reducing the water contact angle, from approximately 150 degrees to approximately 90 degrees, in only 10 seconds of treatment. The new surface chemical groups, promoted by plasma active species, were characterized by surface analysis techniques with different depth penetration specificity (contact angle, XPS, FTIR and SEM). Results demonstrated that very short treatment times produced different chemical functionalities, mainly C-O, C=O, O-C=O and C-N, which provide the materials with predominantly acidic surface properties. However, plasma active species did not penetrate deeply through the interconnected pores of the material. FTIR analysis evidenced that the new hydrophilic surface groups promoted by plasma active species are in a negligibly concentration compared to bulk chemical groups, and are located in a very thin surface region on the PS-DVB monolith surface (significantly below 2 microm). XPS analysis of treated monoliths revealed a progressive increase of oxygen and nitrogen content as a function of plasma treatment time. However, oxidation of the PS-DVB monoliths surface prevails over the incorporation of nitrogen atoms. Finally, SEM studies indicated that the morphology of the plasma treated PS-DVB does not significantly change even for the longest air plasma treatment time studied (120 s).

  14. Fate and transport of selected estrogen compounds in Hawaii soils: Effect of soil type and macropores

    Science.gov (United States)

    D'Alessio, Matteo; Vasudevan, Dharni; Lichwa, Joseph; Mohanty, Sanjay K.; Ray, Chittaranjan

    2014-10-01

    The fate and transport of estrogen compounds in the environment is of increasing concern due to their potential impact on freshwater organisms, ecosystems and human health. The behavior of these compounds in batch experiments suggests low mobility, while field studies indicate the persistence of estrogen compounds in the soil with the possibility of migration to surface water as well as groundwater. To better understand the movement of these chemicals through soils, we examined their transport in three different Hawaiian soils and two aqueous matrices. The three different soils used were an Oxisol, a Mollisol and a cinder, characterized by different mineralogical properties and collected at depths of 60-90 cm and 210-240 cm. Two liquid matrices were used; deionized (DI) water containing calcium chloride (CaCl2), and recycled water collected from a wastewater treatment facility. The experiments were conducted in packed and structured columns. Non-equilibrium conditions were observed during the study, especially in the structured soil. This is believed to be primarily related to the presence of macropores in the soil. The presence of macropores resulted in reduced contact time between soil and estrogens, which facilitated their transport. We found that the organic carbon content and mineralogical composition of the soils had a profound effect on the transport of the estrogens. The mobility of estrone (E1) and 17β-estradiol (E2) was greater in cinder than in the other soils. In column experiments with recycled water, earlier breakthrough peaks and longer tails of estrogens were produced compared to those observed using DI water. The use of recycled water for agricultural purposes and the siting of septic tanks and cesspools should be critically reviewed in light of these findings, especially in areas where groundwater is the primary source of potable water, such as Hawaii.

  15. Fate and transport of selected estrogen compounds in Hawaii soils: effect of soil type and macropores.

    Science.gov (United States)

    D'Alessio, Matteo; Vasudevan, Dharni; Lichwa, Joseph; Mohanty, Sanjay K; Ray, Chittaranjan

    2014-10-01

    The fate and transport of estrogen compounds in the environment is of increasing concern due to their potential impact on freshwater organisms, ecosystems and human health. The behavior of these compounds in batch experiments suggests low mobility, while field studies indicate the persistence of estrogen compounds in the soil with the possibility of migration to surface water as well as groundwater. To better understand the movement of these chemicals through soils, we examined their transport in three different Hawaiian soils and two aqueous matrices. The three different soils used were an Oxisol, a Mollisol and a cinder, characterized by different mineralogical properties and collected at depths of 60-90 cm and 210-240 cm. Two liquid matrices were used; deionized (DI) water containing calcium chloride (CaCl2), and recycled water collected from a wastewater treatment facility. The experiments were conducted in packed and structured columns. Non-equilibrium conditions were observed during the study, especially in the structured soil. This is believed to be primarily related to the presence of macropores in the soil. The presence of macropores resulted in reduced contact time between soil and estrogens, which facilitated their transport. We found that the organic carbon content and mineralogical composition of the soils had a profound effect on the transport of the estrogens. The mobility of estrone (E1) and 17β-estradiol (E2) was greater in cinder than in the other soils. In column experiments with recycled water, earlier breakthrough peaks and longer tails of estrogens were produced compared to those observed using DI water. The use of recycled water for agricultural purposes and the siting of septic tanks and cesspools should be critically reviewed in light of these findings, especially in areas where groundwater is the primary source of potable water, such as Hawaii.

  16. Mechanically robust, rapidly actuating, and biologically functionalized macroporous poly(N-isopropylacrylamide)/silk hybrid hydrogels.

    Science.gov (United States)

    Gil, Eun Seok; Park, Sang-Hyug; Tien, Lee W; Trimmer, Barry; Hudson, Samuel M; Kaplan, David L

    2010-10-05

    A route toward mechanically robust, rapidly actuating, and biologically functionalized polymeric actuators using macroporous soft materials is described. The materials were prepared by combining silk protein and a synthetic polymer (poly(N-isopropylacrylamide) (PNIAPPm)) to form interpenetrating network materials and macroporous structures by freeze-drying, with hundreds of micrometer diameter pores and exploiting the features of both polymers related to dynamic materials and structures. The chemically cross-linked PNIPAAm networks provided stimuli-responsive features, while the silk interpenetrating network formed by inducing protein β-sheet crystallinity in situ for physical cross-links provided material robustness, improved expansion force, and enzymatic degradability. The macroporous hybrid hydrogels showed enhanced thermal-responsive properties in comparison to pure PNIPAAm hydrogels, nonporous silk/PNIPAAm hybrid hydrogels, and previously reported macroporous PNIPAAm hydrogels. These new systems reach near equilibrium sizes in shrunken/swollen states in less than 1 min, with the structural features providing improved actuation rates and stable oscillatory properties due to the macroporous transport and the mechanically robust silk network. Confocal images of the hydrated hydrogels around the lower critical solution temperature (LCST) revealed macropores that could be used to track changes in the real time morphology upon thermal stimulus. The material system transformed from a macroporous to a nonporous structure upon enzymatic degradation. To extend the utility of the system, an affinity platform for a switchable or tunable system was developed by immobilizing biotin and avidin on the macropore surfaces.

  17. Direct access to macroporous chromium nitride and chromium titanium nitride with inverse opal structure.

    Science.gov (United States)

    Zhao, Weitian; DiSalvo, Francis J

    2015-03-21

    We report a facile synthesis of single-phase, nanocrystalline macroporous chromium nitride and chromium titanium nitride with an inverse opal morphology. The material is characterized using XRD, SEM, HR-TEM/STEM, TGA and XPS. Interconversion of macroporous CrN to Cr2O3 and back to CrN while retaining the inverse opal morphology is also demonstrated.

  18. Highly Ordered TiO2 Macropore Arrays as Transparent Photocatalysts

    OpenAIRE

    Yuan Dong; Junfeng Chao; Zhong Xie; Xin Xu; Zhuoran Wang; Di Chen

    2012-01-01

    Highly ordered transparent TiO2 macropore arrays were synthesized via a simple glass-clamping method at room temperature. The as-synthesized TiO2 macropore arrays show high transmittance in the visible light region and can be used as transparent photocatalysts for degradation of organic dyes.

  19. Artificial macropores attract crop roots and enhance plant productivity on compacted soils.

    Science.gov (United States)

    Colombi, Tino; Braun, Serge; Keller, Thomas; Walter, Achim

    2017-01-01

    The structure of compacted soils is characterised by decreased (macro-)porosity, which leads to increased mechanical impedance and decreased fluid transport rates, resulting in reduced root growth and crop productivity. Particularly in soils with high mechanical impedance, macropores can be used by roots as pathways of least resistance. This study investigated how different soil physical states relate to whole plant growth and whether roots grow towards spots with favourable soil physical conditions. Experiments were conducted under controlled and field conditions. Soybean (Glycine max L.), wheat (Triticum aestivum L.) and maize (Zea mays L.) were grown on uncompacted soil, compacted soil and compacted soil with artificial macropores. The interactions between roots and artificial macropores were quantified using X-ray computed tomography. Active growth of roots towards artificial macropores was observed for all three species. Roots grew either into macropores (predominantly in maize) or crossed them (predominantly in wheat). The presence of artificial macropores in compacted soil enabled all three species to compensate for decreased early vigour at later developmental stages. These results show that roots sense their physical environment, enabling them to grow towards spots with favourable soil conditions. The different kinds of root-macropore interaction indicated that macropores serve as a path of least resistance and a source of oxygen, both resulting in increased crop productivity on compacted soils. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. ADSORPTION OF PHENYLACETIC ACID ON MACROPOROUS POLYMERIC ADSORBENTS

    Institute of Scientific and Technical Information of China (English)

    PANBingcai; CHENJinlong; 等

    2002-01-01

    Several macroporous polymeric adsorbents(NDA-999,XAD-8,X-5 and XAD-2)were emplyed in the study to adsorb phenylacetic acid from aqueous solution.Effect of salt and ambient temperature on adsorption was studied using NDA-999 adsorbent and the adsorption process conforms to Freundlich′s model reasonably.Adsorption dynamics were conducted in batch experiments in order to make clear the mechanism of adsorption process.It is proved that the squared driving force mass transfer model can be adopted to elucidate the process.The treatment process of industrial wastewater containing high strength of phenylacetic acid was proposed for cleaner production of phenylacetic acid.

  1. ADSORPTION OF PHENYLACETIC ACID ON MACROPOROUS POLYMERIC ADSORBENTS

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Several macroporous polymeric adsorbents (NDA-999, XAD-8, X-5 and XAD-2) wereemployed in the study to adsorb phenylacetic acid from aqueous solution. Effect of salt and ambienttemperature on adsorption was studied using NDA-999 adsorbent and the adsorption processconforms to Freundlich's model reasonably. Adsorption dynamics were conducted in batchexperiments in order to make clear the mechanism of adsorption process. It is proved that thesquared driving force mass transfer model can be adopted to elucidate the process. The treatmentprocess of industrial wastewater containing high strength of phenylacetic acid was proposed forcleaner production of phenylacetic acid.

  2. Preferential flow in macroporous swelling soil with internal catchment: model development and applications

    Science.gov (United States)

    Greco, Roberto

    2002-12-01

    A new model of infiltration in swelling and shrinking clay soil was developed. The model consisted of two flow domains: soil matrix, with flow modelled by means of Darcy equation, and macropores; the latter was divided in turn into two sub-domains: shrinkage cracks, with aperture dynamically depending on matrix water content, and permanent macropores, independent of matrix saturation. In the shrinkage cracks sub-domain, a kinematic wave equation was derived by considering laminar motion of thin water films, along two parallel nearly vertical walls; in the permanent macropores sub-domain, a kinematic wave equation was assumed, with parameters physically related with macropores shape and dimension. Exchange of water between macropore domains and matrix was introduced in form of sink terms in the macropores mass balance equations, and as source terms in the matrix continuity equation. Infiltration through macropore walls was modelled using a diffusivity function derived from aggregates sorptivity measurements. The internal catchment was included by considering at each layer a fraction of dead end permanent macropores. Water ponding at the bottom of dead end macropores, infiltrated into the corresponding matrix layer. The model was tested against the results of infiltration transients through a large undisturbed swelling and shrinking clay soil column. Outflow rate from column bottom surface was constantly measured, while water content profile was registered at regular time intervals by means of five TDR horizontal probes. In order to quantify model parameters, characterisation of soil matrix was carried out, providing hydraulic conductivity curve, water retention curve, shrinkage characteristic and aggregates diffusivity. All of the other model parameters, thanks to their clear physical meaning, were estimated from direct observation of soil structure, except macropores morphologic parameters, some of which, although measurable, were obtained by calibration due to

  3. New 3-D microarray platform based on macroporous polymer monoliths.

    Science.gov (United States)

    Rober, M; Walter, J; Vlakh, E; Stahl, F; Kasper, C; Tennikova, T

    2009-06-30

    Polymer macroporous monoliths are widely used as efficient sorbents in different, mostly dynamic, interphase processes. In this paper, monolithic materials strongly bound to the inert glass surface are suggested as operative matrices at the development of three-dimensional (3-D) microarrays. For this purpose, several rigid macroporous copolymers differed by reactivity and hydrophobic-hydrophilic properties were synthesized and tested: (1) glycidyl methacrylate-co-ethylene dimethacrylate (poly(GMA-co-EDMA)), (2) glycidyl methacrylate-co-glycerol dimethacrylate (poly(GMA-co-GDMA)), (3) N-hydroxyphthalimide ester of acrylic acid-co-glycidyl methacrylate-co-ethylene dimethacrylate (poly(HPIEAA-co-GMA-co-EDMA)), (4) 2-cyanoethyl methacrylate-co-ethylene dimethacrylate (poly(CEMA-co-EDMA)), and (5) 2-cyanoethyl methacrylate-co-2-hydroxyethyl methacrylate-co-ethylene dimethacrylate (poly(CEMA-co-HEMA-co-EDMA)). The constructed devices were used as platforms for protein microarrays construction and model mouse IgG-goat anti-mouse IgG affinity pair was used to demonstrate the potential of developed test-systems, as well as to optimize microanalytical conditions. The offered microarray platforms were applied to detect the bone tissue marker osteopontin directly in cell culture medium.

  4. Preparative Purification of Liriodendrin from Sargentodoxa cuneata by Macroporous Resin

    Directory of Open Access Journals (Sweden)

    Di-Hua Li

    2015-01-01

    Full Text Available The preparative purification of liriodendrin from Sargentodoxa cuneata using macroporous resin combined with crystallization process was evaluated. The properties of adsorption/desorption of liriodendrin on eight macroporous resins were investigated systematically. X-5 resin was selected as the most suitable medium for liriodendrin purification. The adsorption of liriodendrin on X-5 resin fitted well with the pseudo-second-order kinetic model and Langmuir isotherm model. Dynamic adsorption/desorption tests were performed using a glass column packed with X-5 resin to optimize the separation process of liriodendrin. After one treatment with X-5 resin, the content of liriodendrin in the product was increased 48.73-fold, from 0.85% to 41.42%, with a recovery yield of 88.9%. 97.48% liriodendrin was obtained by further crystallization and determined by HPLC. The purified product possessed strong antioxidant activity. In conclusion, purification of liriodendrin might expend its further pharmacological researches and further applications in pharmacy.

  5. Effects of hydrophilic macropore fillings and coatings on the infiltration into water repellent porous media

    Science.gov (United States)

    Suetsugu, A.; Mori, Y.

    2012-12-01

    Macropores generate rapid flow paths in the surface soils by their high permeability under saturated/near-saturated moisture conditions. In natural soils, some macropores are filled/coated with various materials including decayed plant roots (Meek et al., 1989), exudates from plants/soil organisms (Jegou et al., 2001), iron oxides or other precipitates from preferentially-introduced solutes/colloids to the macropores (Rasmussen et al., 2001), or the surrounding soils with reduced bulk density (Ela et al., 1992). When we expect infiltration into water repellent soils through macropores or hydrophilic patches created from the macropore cementation processes, hydrophilicity of the macropore fillings/coatings should be understood. In the present study, we conducted an infiltration experiment with water repellent porous media and some macropore fillings/coatings, in order to clarify the roles of hydrophilic macropore fillings/coatings in infiltration. Ponding depth and flow distribution were monitored with a micro-focus X-ray computational tomography apparatus (SMX-90CT, Shimadzu Corp., Kyoto, Japan) at 90 kV and 110 μA. Dilute CsCl(aq) (density: 1.04 Mg m-3) was used as the contrast media to avoid density-driven alteration of the flows. Water repellency of the samples was evaluated by the water drop penetration time (WDPT, Van't Woudt, 1959). A glass beads (mean diameter: 0.46 mm, BZ-04, ASONE Corp., Osaka, Japan) was used as water repellent porous media. The glass beads sample was packed in 50-mL polypropylene centrifugation tubes at 1.55 Mg m-3 bulk density. A 2-mm hole was made at the bottom of each centrifugation tube for ventilation. The hole was covered with mesh cloth. Macroporous structure was made at the center of each tube from the surface. Each macroporous structure had 4-mm diameter and 30-mm length. Six types of macropores were prepared including 1) no macropore, 2) empty macropore, 3) an aluminum (Al) pipe (4-mm inner diameter, 5-mm outer diameter), 4) a

  6. Carbon nanotube-coated macroporous sponge for microbial fuel cell electrodes

    KAUST Repository

    Xie, Xing

    2012-01-01

    The materials that are used to make electrodes and their internal structures significantly affect microbial fuel cell (MFC) performance. In this study, we describe a carbon nanotube (CNT)-sponge composite prepared by coating a sponge with CNTs. Compared to the CNT-coated textile electrodes evaluated in prior studies, CNT-sponge electrodes had lower internal resistance, greater stability, more tunable and uniform macroporous structure (pores up to 1 mm in diameter), and improved mechanical properties. The CNT-sponge composite also provided a three-dimensional scaffold that was favorable for microbial colonization and catalytic decoration. Using a batch-fed H-shaped MFC outfitted with CNT-sponge electrodes, an areal power density of 1.24 W m -2 was achieved when treating domestic wastewater. The maximum volumetric power density of a continuously fed plate-shaped MFC was 182 W m -3. To our knowledge, these are the highest values obtained to date for MFCs fed domestic wastewater: 2.5 times the previously reported maximum areal power density and 12 times the previously reported maximum volumetric power density. © 2011 The Royal Society of Chemistry.

  7. Links between matrix bulk density, macropore characteristics and hydraulic behavior of soils

    DEFF Research Database (Denmark)

    Katuwal, Sheela; Møldrup, Per; Lamandé, Mathieu

    2013-01-01

    The relationship of soil bulk density with the hydraulic behavior of soil and the role of macropores in preferential flow and transport has been extensively studied in literatures. Yet, the influence of soil structural heterogeneity as simultaneous variation of bulk density and macropore characte......The relationship of soil bulk density with the hydraulic behavior of soil and the role of macropores in preferential flow and transport has been extensively studied in literatures. Yet, the influence of soil structural heterogeneity as simultaneous variation of bulk density and macropore...... resolution X-ray CT and linked them with laboratory measurements of air permeability and leaching experiment. In addition to macropore characteristics, we also quantified the CT-number of the matrix as a measure of the bulk density of the matrix, i.e., excluding macropores in the soil. Soils from the two...... field sites had similar texture (loam or sandy loam), yet the sand content was higher in Faardrup soils and clay and organic carbon content were higher in Silstrup soils. In general, Silstrup soil had more macropores (>1.2mm) than Faardrup soils but both the soils exhibited similar relationships between...

  8. Synthesis of 3D ordered macroporous indium tin oxide using polymer colloidal crystal template

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Xue'ao; MAN; Yahui; WANG; Jianfang; LIU; Changli; WU; Wenjian

    2006-01-01

    Three-dimensional (3D) ordered macroporous indium tin oxide (ITO) is prepared using a polymer colloidal crystal template that is formed by self-assembly of the monodisperse poly(methyl methacrylate) (PMMA) microspheres. The morphologies and BET surface area of the macroporous material is examined by scanning electron microscope, transmission electron microscopy and N2 adsorption/desorption. Results indicate that the macroporous material has highly ordered arrays of the uniform pores replicated from the PMMA colloidal crystal template when the polymer colloidal crystal template is removed by calcinations at 500℃. The pore diameter (about 450 nm) of macroporous ITO slightly shrank to the PMMA microspheres. The BET surface area and pore volume of the macroporous material are 389 m2·g-1 and 0.36 cm3·g-1, respectively. Moreover, the macroporous ITO, containing 5 mol% Sn and after annealing under vacuum, shows the minimum resistivity of ρ= 8.2×10-3 Ω· cm. The conductive mechanism of macroporous ITO is discussed, and it is believed that the oxygen vacancies are the major factor for excellent electrical properties.

  9. Novel anti-infective implant substrates: controlled release of antibiofilm compounds from mesoporous silica-containing macroporous titanium.

    Science.gov (United States)

    Braem, Annabel; De Cremer, Kaat; Delattin, Nicolas; De Brucker, Katrijn; Neirinck, Bram; Vandamme, Katleen; Martens, Johan A; Michiels, Jan; Vleugels, Jef; Cammue, Bruno P A; Thevissen, Karin

    2015-02-01

    Bone implants with open porosity enable fast osseointegration, but also present an increased risk of biofilm-associated infections. We design a novel implant material consisting of a mesoporous SiO2 diffusion barrier (pore diameter: 6.4 nm) with controlled drug release functionality integrated in a macroporous Ti load-bearing structure (fully interconnected open porosity: 30%; pore window size: 0.5-2.0 μm). Using an in vitro tool consisting of Ti/SiO2 disks in an insert set-up, through which molecules can diffuse from feed side to release side, a continuous release without initial burst effect of the antibiofilm compound toremifene is sustained for at least 9 days, while release concentrations (up to 17 μM daily) increase with feed concentrations (up to 4mM). Toremifene diffusivity through the SiO2 phase into H2O is estimated around 10(-13)m(2)/s, suggesting configurational diffusion through mesopores. Candida albicans biofilm growth on the toremifene-release side is significantly inhibited, establishing a proof-of-concept for the drug delivery functionality of mesoporous SiO2 incorporated into a high-strength macroporous Ti carrier. Next-generation implants made of this composite material and equipped with an internal reservoir (feed side) can yield long-term controlled release of antibiofilm compounds, effectively treating infections on the implant surface (release side) over a prolonged time. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Rainfall Simulator Experiments to Investigate Macropore Impacts on Hillslope Hydrological Response

    Directory of Open Access Journals (Sweden)

    Yvonne Smit

    2016-11-01

    Full Text Available Understanding hillslope runoff response to intense rainfall is an important topic in hydrology, and is key to correct prediction of extreme stream flow, erosion and landslides. Although it is known that preferential flow processes activated by macropores are an important phenomena in understanding runoff processes inside a hillslope, hydrological models have generally not embraced the concept of an extra parameter that represents ‘macropores’ because of the complexity of the phenomenon. Therefore, it is relevant to investigate the influence of macropores on runoff processes in an experimental small artificial hillslope. Here, we report on a controlled experiment where we could isolate the influence of macropores without the need for assumptions regarding their characteristics. Two identical hillslopes were designed, of which one was filled with artificial macropores. Twelve artificial rainfall events were applied to the two hillslopes and results of drainage and soil moisture were investigated. After the experiments, it could be concluded that the influence of macropores on runoff processes was minimal. The S90 sand used for this research caused runoff to respond fast to rainfall, leading to little or no development of saturation near the macropores. In addition, soil moisture data showed a large amount of pendular water in the hillslopes, which implies that the soil has a low air entry value, and, in combination with the lack of vertical flow, could have caused the pressure difference between the matrix and the macropores to vanish sooner and result in equilibrium being reached in a relatively short time. Nevertheless, a better outline is given to determine a correct sand type for these types of experiments and, by using drainage recession analysis to investigate the influences of macropores on runoff, heterogeneity in rainfall intensity can be overcome. This study is a good point of reference to start future experiments from concerning

  11. Application of BIB-SEM technology to characterize meso- and macropore morphology in coal

    Science.gov (United States)

    Giffin, Susan; Littke, Ralf; Klaver, Jop; Urai, Janos

    2013-04-01

    Coalbeds are very heterogenous in composition, which in turn affects the connectivity and transport of fluids within the coal. The composition of a coalbed influences the pore structure. Pore structure as well as pore size distribution are two important parameters used in estimating reservoir properties. This study examines the morphology and distribution of macro- and mesopores in coal samples, using broad ion beam (BIB) milling to prepare relief- and damage-free polished surfaces of coal samples for high-resolution SEM imaging. The BIB-sections of a few square millimeters are not large enough to be statistically representative so that the results cannot be easily interpreted from a coal seam standpoint. Therefore, porosity was investigated as a function of maceral type to characterize pore morphologies. Macerals were selected from the vitrinite group, e.g. telocollinite, and from the inertinite group, e.g. fusinite and macrinite. The selected macerals were BIB-milled parallel to bedding and subsequently milled perpendicular to bedding. Pore morphology and pore size distribution was examined in each of the milled sections. For a vitrinite maceral type, we found no visible macroporosity within the resolution limits of the SE detector. Pore morphology in an inertinite maceral is dependent on the original maceral. Fusinite yields large, elongated pores (often filled with mineralization), while macrinite shows comparatively smaller, rounder pores. The BIB-milled sections perpendicular to bedding often showed an alternating sequence of bedding, with bed thicknesses varying between a few micrometers to greater than half a millimeter. The distribution of pores is also reflected by bed thickness in the sections perpendicular to bedding, with many pores being concentrated in association with the beds. The distribution of pore sizes follows a similar power law at different magnifications of the same BIB-milled surface. Our results show that micropores and macropores in coal

  12. Adsorption Characteristics of Macroporous Resin for Oil Removal from Desulphurization Wastewater on Board

    Science.gov (United States)

    Li, Tie; Chen, Chen; Jin, Qi; Zhao, Jiao; Tang, Xiaojia; Zhu, Yimin

    2017-01-01

    According to our previous results on the magnesium-based exhaust gas cleaning system (Mg-EGCS), PAHs and total oil content were the main factors affecting the COD in the wastewater. In this work, three kinds of adsorption materials were investigated and macroporous resin was selected for oil removal. The effects of the dosage of macroporous resin, adsorption time and the flow rate were studied, and thermodynamics equation was used to characterize the adsorption process. The results showed that macroporous resin is a good candidate for oil removal from desulphurization wastewater on board, and the COD after treatment can meet the discharge criteria set by the International Maritime Organization (IMO).

  13. Quantification and Purification of Mulberry Anthocyanins with Macroporous Resins

    Directory of Open Access Journals (Sweden)

    Xueming Liu

    2004-01-01

    Full Text Available Total anthocyanins in different cultivars of mulberry were measured and a process for the industrial preparation of mulberry anthocyanins as a natural food colorant was studied. In 31 cultivars of mulberry, the total anthocyanins, calculated as cyanidin 3-glucoside, ranged from 147.68 to 2725.46 mg/L juice. Extracting and purifying with macroporous resins was found to be an efficient potential method for the industrial production of mulberry anthocyanins as a food colorant. Of six resins tested, X-5 demonstrated the best adsorbent capability for mulberry anthocyanins (91 mg/mL resin. The adsorption capacity of resins increased with the surface area and the pore radius. Residual mulberry fruit juice after extraction of pigment retained most of its nutrients, except for anthocyanins, and may provide a substrate for further processing.

  14. Separation of capsaicin from capsaicinoids by macroporous resin adsorption chromatography.

    Science.gov (United States)

    Liu, Changxia; Liu, Ruican; Zhang, Peng; Chen, Yiming; Xu, Tao; Wang, Fang; Tan, Tianwei; Liu, Chunqiao

    2015-12-01

    The aim of present study is to develop an efficient and low-cost method for capsaicin production isolated from capsaicinoids by macroporous resin adsorption chromatography. HZ816 resin has shown the best adsorption and desorption capacities for capsaicin among other resins. To optimize the operating parameters for separation, initial concentration, diameter-to-height ratio, mobile phase ratio, and crystallization method were investigated. When capsaicinoids solution (5 g/L) was loaded onto the column (diameter-to-height ratio = 1:12) with ethanol/1% w/w NaOH (4:6, v/v) as the mobile phase, capsaicin was purified most effectively. By using acid neutralization as the crystallization method, the purity of capsaicin improved from 90.3 to 99.5% with 82.3% yield. In conclusion, this study provides a simple and low-cost method for the industrial-scale production of high-purity capsaicin.

  15. Immobilization of bacteria in microgel grafted onto macroporous polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Trelles, J.A.; Quiroga, F.; Britos, C. [Dpto. de Ciencia y Tecnologia, Universidad Nacional de Quilmes, Roque Saenz Pena 352, (B1876BXD) Bernal, Buenos Aires (Argentina); Smolko, Eduardo E. [Comision Nacional de Energia Atomica, Buenos Aires (Argentina); Grasselli, Mariano, E-mail: mgrasse@unq.edu.a [Dpto. de Ciencia y Tecnologia, Universidad Nacional de Quilmes, Roque Saenz Pena 352, (B1876BXD) Bernal, Buenos Aires (Argentina)

    2010-03-15

    The development of 'Green Chemistry' requires new materials to replace the conventional organic chemistry by biological catalysts, to produce fine chemicals in an environmentally friendly manner. Microbial whole cells can be directly used as biocatalysts, providing a simple and cheap methodology since enzyme isolation and purification are avoided. High-density polyethylene (HDPE) is a very stable polymer though it can be activated by gamma radiation to induce grafting. Glycidyl methacrylate was grafted onto macroporous HDPE and PP in the range of 1-6%, proportional to the initial monomer concentration. Grafted polymers were further chemically modified with ethylenediamine to generate a cationic hydrogel of micron-size thickness onto the internal polymer surfaces. Modified polymers were able to immobilize Gram-positive and Gram-negative bacteria that can catalyze a chemical reaction as efficient as free cells do.

  16. Immobilization of bacteria in microgel grafted onto macroporous polyethylene

    Science.gov (United States)

    Trelles, J. A.; Quiroga, F.; Britos, C.; Smolko, Eduardo E.; Grasselli, Mariano

    2010-03-01

    The development of " Green Chemistry" requires new materials to replace the conventional organic chemistry by biological catalysts, to produce fine chemicals in an environmentally friendly manner. Microbial whole cells can be directly used as biocatalysts, providing a simple and cheap methodology since enzyme isolation and purification are avoided. High-density polyethylene (HDPE) is a very stable polymer though it can be activated by gamma radiation to induce grafting. Glycidyl methacrylate was grafted onto macroporous HDPE and PP in the range of 1-6%, proportional to the initial monomer concentration. Grafted polymers were further chemically modified with ethylenediamine to generate a cationic hydrogel of micron-size thickness onto the internal polymer surfaces. Modified polymers were able to immobilize Gram-positive and Gram-negative bacteria that can catalyze a chemical reaction as efficient as free cells do.

  17. Macroporous hydrogels with tailored morphology and mechanical properties

    Science.gov (United States)

    Bignotti, Fabio; Agnelli, Silvia; Baldi, Francesco; Sartore, Luciana; Peroni, Isabella

    2016-05-01

    In this work it is shown that hydroxyethylcellulose (HEC) can be employed for preparing macroporous polyacrylamide (PAAm) hydrogels with tailored morphology and mechanical properties. By changing the HEC content in the reaction mixture hydrogels with different pore sizes and degrees of interconnectivity can be synthesized. The equilibrium swelling ratio in 0.1 M NaCl increases with the amount of HEC employed. Tensile tests run on equilibrated hydrogels show that these materials behave as rubber-like materials. Their mechanical stiffness decreases regularly as the amount of HEC, and therefore their porosity, is increased. A more complex trend is observed for elongation and stress at break, which display a maximum at intermediate contents of HEC.

  18. ADSORPTION OF MACROPOROUS PHOSPHONIC ACID RESIN FOR INDIUM

    Institute of Scientific and Technical Information of China (English)

    WANG Huijun; XIONG Chunhua; YAO Caiping

    2004-01-01

    The adsorption kinetics and mechanism of a novel chelate resin, macroporous phosphonic acid resin (PAR) for In(III) were investigated. The statically saturated adsorption capacity is 216mg·g-1resin at 298K in HAc-NaAc medium. The apparent adsorption rate constant is k298=4.84×10-5 s-1. The adsorption behavior of PAR for In(III) obeys the Freundlich isotherm. The thermodynamic adsorption parameters, enthalpy change △H, free energy change △G and entropy change △S of PAR for In(III) are 11.5kJ/mol, -12.6kJ/mol and 80.8J/mol·K, respectively. The apparent activation energy is Ea=3.5kJ/mol. The molar coordination ratio of the functional group of PAR to In(III) is about 3∶1.

  19. Electro-responsive macroporous polypyrrole scaffolds for triggered dexamethasone delivery.

    Science.gov (United States)

    Seyfoddin, A; Chan, A; Chen, W-T; Rupenthal, I D; Waterhouse, G I N; Svirskis, D

    2015-08-01

    Corticosteroids such as dexamethasone are first line ophthalmic treatment for non-infectious posterior uveitis. Corticosteroids are often administered via intravitreal injection to treat this condition with frequent injections associated with poor treatment adherence and complications such as endophthalmitis. Current ocular implants provide sustained corticosteroid release at predetermined rates and lack the ability for dose individualisation. This study describes the successful fabrication of electrically responsive macroporous polypyrrole (PPy) thin films, and their subsequent application to triggered dexamethasone release. Colloidal crystal films composed of 370nm polymethylmethacrylate colloids were first deposited on ITO coated glass substrates, and subsequently used as sacrificial templates for the fabrication of high surface area, 3-dimensionally ordered macroporous PPy inverse opal (PPy IO) thin films. SEM, UV-Vis reflectance and cyclic voltammetry measurements established that the redox state of the PPy IO films could be controlled via electrical stimulation, which in turn influences both porosity and optical properties of the films. Incorporation of the anti-inflammatory corticosteroid, dexamethasone phosphate (DexP), in the PPy IO films during their fabrication resulted in an effective delivery platform for triggered DexP release. A sustained release profile was observed for the PPy IO-DexP films, bursts of release could be triggered by electrical stimulation. The amount of DexP released from the PPy IO-DexP films was significantly higher than that released from the conventional non-porous PPy-DexP films of comparable mass. Results suggest that electrically responsive PPy IO structures are highly suitable for on-demand drug delivery applications. This technology may enable physicians to fine-tune the required dose according to disease state and patients' needs to enhance the safety and efficacy of corticosteroid treatment. Copyright © 2015 Elsevier B

  20. 壳聚糖-明胶-碱性成纤维细胞生长因子三维大孔支架对骨髓间充质干细胞增殖的影响%In vitro proliferation of mesenchymal stem cells on three-dimensional macroporous scaffolds of chitosan-gelatin-basic fibroblast growth factor composite

    Institute of Scientific and Technical Information of China (English)

    黎晖; 陈东风; 刘金元; 周健洪; 杜少辉; 李伊为; 邓汝东; 张赛霞; 曾和平

    2008-01-01

    BACKGROUND: Stem cell differentiation potential is strongly correlated with culture condition. The alteration in scaffold material surface function, three dimensional (3D) structure, and addition of growth factors can control stem cell proliferation and differentiation.OBJECTIVE: To develop 3D macroporous scaffolds with optimal porosity and porous structure to provide a microenvironment that promotes the growth of multi-potent stem cells.DESIGN: Repetitive measurement.SETTING: Department of Anatomy, College of Basic Medicine, Guangzhou University of Chinese Medicine.MATERIALS: Healthy adult SD rats were provided by the Experimental Animal Center in Guangzhou University of Chinese Medicine. Chitosan and basic fibroblast growth factor (bFGF) were purchased from Sigma Corporation (St. Louis,MO).METHODS: The experiment was performed at the Department of Anatomy, College of Basic Medicine, Guangzhou University of Chinese Medicine from March 2003 to December 2006. Using a freeze-drying method, 3D macroporous scaffolds made of different ratios of chitosan-gelatin with bFGF were fabricated that could release bFGF with controlled porosity and porous structure. Bone marrow was obtained from the femur and tibia of SD rats, and mesenchymal stem cells (MSCs) were isolated, cultured and seeded on the scaffolds with bFGF. MSCs seeded on scaffolds with no bFGF served as control. The procedure during experiment was accorded with animal ethical requirements.MAIN OUTCOME MEASURES: 3D structure and release performance of the scaffolds were observed by ELISA and scanning electron microscope; the effect of 3D macroporous scaffolds that released bFGF on MSC growth and viability were observed by HE staining, MTT, cell counting and SEM.RESULTS: There was no significant difference in pore size between scaffolds with and without bFGF (P > 0.05). Scaffolds with bFGF significantly improved MSC survival rate, promoted cell adhesion, proliferation, and viability compared with scaffolds without

  1. Pesticide transport to tile-drained fields in SWAT model – macropore flow and sediment

    DEFF Research Database (Denmark)

    Lu, Shenglan; Trolle, Dennis; Blicher-Mathiesen, Gitte;

    2015-01-01

    as a fraction of effective rainfall and transported to the tile drains directly. Macropore sediment transport is calculated similarly to the MACRO model (Jarvis et al., 1999). Mobile pesticide transport is calculated with a decay function with the flow, whereas sorbed pesticides transport is associated...... Tool (SWAT) to simulate transport of both mobile (e.g. Bentazon) and strongly sorbed (e.g. Diuron) pesticides in tile drains. Macropore flow is initiated when soil water content exceeds a threshold and rainfall intensity exceeds infiltration capacity. The amount of macropore flow is calculated......Preferential flow and colloidal facilitated transport via macopores connected to tile drains are the main pathways for pesticide transport from agricultural areas to surface waters in some area. We developed a macropore flow module and a sediment transport module for the Soil and Water Assessment...

  2. Flow and transport processes in a macroporous subsurface-drained glacial till soil

    DEFF Research Database (Denmark)

    Villholth, Karen G.; Jensen, Karsten Høgh

    1998-01-01

    -scale concentration gradients, is questioned. Decreasing the domain exchange resulted in an improved model correspondence with the drainage chemograph. The drainage flow pattern was altered between drainage seasons owing to the changes in hydraulic efficiency of surface-vented macropores influenced by the physical......The experimental results from a field-scale tracer experiment in a subsurface-drained glacial till soil were analyzed by the application of a single/dual porosity model (MACRO), optionally accounting for concurrent and interacting flow and transport in the bulk soil porosity as well...... as in the macropores. The model analysis showed that macropore flow is essential in describing the observed transport phenomenon on a short as well as a longer time scale. The diffusive exchange of solute between the matrix and the macropores was very sensitive and critical for the model prediction of the drainage...

  3. Oscillations of light absorption in 2D macroporous silicon structures with surface nanocoatings

    Energy Technology Data Exchange (ETDEWEB)

    Karachevtseva, L., E-mail: lakar@isp.kiev.ua [V. Lashkaryov Institute of Semiconductor Physics, National Academy of Sciences of Ukraine, 41 Nauki Pr., 03028 Kyiv (Ukraine); Kuchmii, S. [L.V. Pisarzhevskii Institute of Physical Chemistry, National Academy of Sciences of Ukraine, 31 Nauki Pr., 03028 Kyiv (Ukraine); Lytvynenko, O.; Sizov, F.; Stronska, O. [V. Lashkaryov Institute of Semiconductor Physics, National Academy of Sciences of Ukraine, 41 Nauki Pr., 03028 Kyiv (Ukraine); Stroyuk, A. [L.V. Pisarzhevskii Institute of Physical Chemistry, National Academy of Sciences of Ukraine, 31 Nauki Pr., 03028 Kyiv (Ukraine)

    2011-02-01

    We investigated the near-IR light absorption oscillations in 2D macroporous silicon structures with microporous silicon layers and CdTe, ZnO surface nanocrystals. The electro-optical effect was taken into account within the strong electric field approximation. Well-separated oscillations were observed in the spectral ranges of the surface bonds of macroporous silicon structures with surface nanocrystals. The model of the resonant electron scattering on impurity states in electric field of heterojunction 'silicon-nanocoating' on macropore surface as well as realization of Wannier-Stark effect on the randomly distributed surface bonds were considered. The Wannier-Stark ladders are not broken by impurities because of the longer scattering lifetime as compared with the period of electron oscillations in an external electric field, in all spectral regions considered for macroporous silicon structures with CdTe and ZnO surface nanocrystals.

  4. MACROPORE FLOW AND MASS WASTING OF GULLIES IN THE LOESS PLATEAU, CHINA

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Due to the extensive gullying from historically excessive erosion in the loess plateau of China, much of this region is being converted to native grass and shrub vegetation. Tunnel scour and mass wasting are important gully erosion processes resulting from preferential flow through macropores ( pores > 1 mm diameter). The objective of this study is to assess the changes with time in macropore flow characteristics of soils on the Loess Plateau following conversion to grass vegetation and the associated degree of mass wasting of gully faces. Ridge areas that had been revegetated for 1 year, 6 years, and > 15 years following tilling, and for 6 years following contour-ditching and the adjacent gully faces were characterized for their macropore and soil matrix properties on a 50 cm by 50 cm area. The total number of macropores increased from 11.6/m2 to 39.6/m2 from 1 to 6 years and to 51.6/m2 after 15 years of revegetation following tillage. The macroporosity increased from 0.0008 m3/m3 to 0.0018 m3/m3 from 1 to 6 years of revegetation following tillage but the lowest macroporosity (0.0005 m3/m3) was 6 years of revegetation following contour-ditching. The contour-ditched area had the lowest infiltration rate (95 m/d) through the soil matrix (areas without macropores) with the tilled areas having similar infiltration rates regardless of the number of years of revegetation (averaged 146 m/d). Due to tunnel scour erosion of macropores during infiltration into the area revegetated for 1 year, pore diameters enlarged by more than 200% resulting in this condition having the highest individual macropore infiltration rates (7967 m/d). Macropores in all other areas were stable with no tunnel scour erosion of macropores. The total capacity for infiltration through macropores increased significantly with time following revegetation. The number of macropores on the gully faces was triple (92.8/m2) and the macroporosity quadruple (0.004 m3/m3) that of the ridge surfaces. The upper

  5. Preparation and characterization of polystyrene-based monolith with ordered macroporous structure

    Institute of Scientific and Technical Information of China (English)

    Quan Zhou Wu; Jian Feng He; Ji Ming Ou

    2012-01-01

    In this paper,polystyrene-based monoliths with highly ordered macroporous structure were synthesized by using SiO2 colloidal crystal as template.SEM observation shows that the macropores are highly ordered and are interconnected by small windows.The BET surface area of PS monolith is about 36.17 m2/g.The polymer monoliths can resist 5 MPa pressure,showing high mechanical and compressive strength.

  6. Preparative Separation and Purification of the Total Flavonoids in Scorzonera austriaca with Macroporous Resins

    OpenAIRE

    Yang Xie; Qiu-Shi Guo; Guang-Shu Wang

    2016-01-01

    The use of macroporous resins for the separation and purification of total flavonoids to obtain high-purity total flavonoids from Scorzonera austriaca was studied. The optimal conditions for separation and purification of total flavonoids in S. austriaca with macroporous resins were as follows: D4020 resin columns were loaded with crude flavonoid extract solution, and after reaching adsorptive saturation, the columns were eluted successively with 5 bed volumes (BV) of water, 5 BV of 5% (v/v) ...

  7. Application of polymeric macroporous supports for temperature-responsive chromatography of pharmaceuticals.

    Science.gov (United States)

    Lamprou, Alexandros; Gavriilidou, Agni-Faviola-Mika; Storti, Giuseppe; Soos, Miroslav; Morbidelli, Massimo

    2015-08-14

    A macroporous particulate support prepared previously by reactive gelation under shear and functionalized with poly(N-isopropylacrylamide), PNIPAM, brushes of variable length is applied for temperature-responsive chromatography, whereby temperature modulates hydrophobic interactions. Several different analytes, including small pharmaceuticals, peptides, proteins and monoclonal antibodies are employed. Contrary to the most commonly observed behavior in conventional chromatography, increasing retention is observed at elevated temperatures. Peak broadening is quantified using the peak standard deviation, which depends on both the polymer chain conformation and analyte adsorptivity. The favorable effect of grafted polymer thickness on retention becomes progressively less pronounced for thicker grafted PNIPAM layers. The effect of eluent composition on solute-sorbent interactions was investigated by introducing NaCl, methanol, dioxane and by varying the pH. Salt or organic solvent addition affects apart from the analytes solution properties, the hydrophobicity of the stationary phase itself. Frontal analyses performed at different temperatures to determine dynamic binding capacities, indicate small mass transfer resistances imposed by this novel packing material. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Ordered macroporous quercetin molecularly imprinted polymers: Preparation, characterization, and separation performance.

    Science.gov (United States)

    Feng, Yonggang; Liu, Qin; Ye, Lifang; Wu, Quanzhou; He, Jianfeng

    2017-02-01

    Ordered macroporous molecularly imprinted polymers were prepared by a combination of the colloidal crystal templating method and the molecular imprinting technique by using SiO2 colloidal crystal as the macroporogen, quercetin as the imprinting template, acrylamide as the functional monomer, ethylene glycol dimethacrylate as the cross-linker and tetrahydrofuran as the solvent. Scanning electron microscopy and Brunauer-Emmett-Teller measurements show that the ordered macroporous molecularly imprinted polymers have a more regular macroporous structure, a narrower pore distribution and a greater porosity compared with the traditional bulk molecularly imprinted polymers. The kinetic and isothermal adsorption behaviors of the polymers were investigated. The results indicate that the ordered macroporous molecularly imprinted polymers have a faster intraparticle mass transfer process and a higher adsorption capacity than the traditional bulk molecularly imprinted polymers. The ordered macroporous molecularly imprinted polymers were further employed as a sorbent for a solid-phase extraction. The results show that the ordered macroporous molecularly imprinted polymers can effectively separate quercetin from the Gingko hydrolysate.

  9. Soil organic carbon, macropore networks and preferential transport

    Science.gov (United States)

    Larsbo, Mats; Koestel, John; Kätterer, Thomas; Jarvis, Nick

    2016-04-01

    Agricultural management practices such as tillage, crop rotations, residue management and fertilization can have a strong influence on soil organic carbon (SOC) stocks. An increase in SOC content will generally improve soil structure, which in turn determines the solute transport pathways through the soil. The aim of this study was to quantify the architecture of macropore networks in undisturbed soil columns (15 cm high, 12.7 cm diameter) sampled along a transect with natural variations in SOC using X-ray tomography and to relate the network characteristics to the degree of preferential transport in the columns. Two tracer experiments were carried out at constant irrigation rates of 2 and 5 mm h-1. We used the normalised 5% arrival time which reflects the tendency for early arrival of the solutes as a measure of the degree of preferential transport. The soil macropore networks were analysed in cylindrical sub-volumes (8 cm high, 10 cm diameter) located centrally within the soil columns. These sub-volumes were considered unaffected by sampling artefacts. Analyses were also carried out the for whole sample volumes to enable comparisons with the results from the transport experiments. Image processing and analysis were carried out in ImageJ and R. The same grey value threshold was applied to all images after harmonisation of grey values using the PVC column walls and the air outside the columns. This approach resulted in a satisfactory separation between the pore space and the surrounding soil matrix and organic matter. The SOC content along the transect, which varied from 4.2 to 15% , was correlated to all measures of the pore network for the sub-volumes except for the connectivity probability. Columns with high SOC content were associated with large macroporosities (both total and connected), large specific surface areas, large fractal dimensions and small mean pore thicknesses. The SOC content for whole sample volumes was positively correlated to 5% arrival times

  10. Macropore system characteristics controls on non-reactive solute transport at different flow rates

    Science.gov (United States)

    Larsbo, Mats; Koestel, John

    2014-05-01

    Preferential flow and transport in macroporous soils are important pathways for the leaching of agrochemicals through soils. Preferential solute transport in soil is to a large extent determined by the macropore system characteristics and the water flow conditions. The importance of different characteristics of the macropore system is likely to vary with the flow conditions. The objective of this study was to determine which properties of the macropore system that control the shape of non-reactive tracer solute breakthrough curves at different steady-state flow rates. We sampled five undisturbed columns (20 cm high, 20 cm diameter) from the soil surface of four soils with clay contents between 21 and 50 %. Solute transport experiments were carried out under unsaturated conditions at 2, 4, 6, 8 and 12 mm h-1 flow rates. For each flow rate a pulse of potassium bromide solution was applied at the soil surface and the electrical conductivity was measured with high temporal resolution in the column effluent. We used the 5 % arrival time and the holdback factor to estimate the degree of preferential transport from the resulting breakthrough curves. Unsaturated hydraulic conductivities were measured at the soil surface of the columns using a tension disc infiltrometer. The macropore system was imaged by industrial X-ray computed tomography at a resolution of 125 μm in all directions. Measures of the macropore system characteristics including measures of pore continuity were calculated from these images using the ImageJ software. Results show that the degree of preferential transport is generally increasing with flow rate when larger pores become active in the transport. The degree of preferential flow was correlated to measures of macropore topology. This study show that conclusions drawn from experiments carried out at one flow rate should generally not be extrapolated to other flow rates.

  11. Facile fabrication of egg white macroporous sponges for tissue regeneration.

    Science.gov (United States)

    Jalili-Firoozinezhad, Sasan; Rajabi-Zeleti, Sareh; Mohammadi, Parvaneh; Gaudiello, Emanuele; Bonakdar, Shahin; Solati-Hashjin, Mehran; Marsano, Anna; Aghdami, Nasser; Scherberich, Arnaud; Baharvand, Hossein; Martin, Ivan

    2015-10-28

    The availability of 3D sponges combining proper biochemical, biophysical, and biomechanical properties with enhanced capacity of in vivo engraftment and vascularization is crucial in regenerative medicine. A simple process is developed to generate macroporous scaffolds with a well-defined architecture of interconnected pores from chicken egg white (EW), a material with protein- and growth factor-binding features which has not yet been employed in regenerative medicine. The physicomechanical properties and degradation rates of the scaffold are finely tuned by using varying concentrations of the cross-linker, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride, without alteration of the biochemical traits. In vitro, EW scaffolds supported active metabolism, proliferation, and migration of human dermal fibroblasts, thereby generating uniform cellular constructs. In vivo, subcutaneous implantation in mice reveals negligible immune reaction and efficient cell and tissue ingrowth. Angiogenesis into EW scaffolds is enhanced as compared to standard collagen type I sponges used as reference material, likely due to significantly higher adsorption of the proangiogenic factor vascular endothelial growth factor. In summary, a material is presented derived by facile processing of a highly abundant natural product. Due to the efficient subcutaneous engraftment capacity, the sponges can find utilization for soft tissue regeneration.

  12. Preparation and bioactivity of sol-gel macroporous bioactive glass

    Institute of Scientific and Technical Information of China (English)

    Zhihua Zhou; Jianming Ruan; Jianpeng Zou; Zhongcheng Zhou

    2008-01-01

    Bioactive glass is well known for its ability of bone regeneration, and sol-gel bioactive glass has many advantages com-pared with melt-derived bioactive glass. 3-D scaffold prepared by the sol-gel method is a promising substrate material for bone tissue engineering and large-scale bone repair. Porous sol-gel glass in the CaO-SiO2-P2O5 system with macropores larger than 100 μm was prepared by the addition of stearic acid as a pore former. The diameter of the pore created by the pore former varied from 100 to 300μm. The formation of a hydroxyapatite layer on the glass was analyzed by studying the surface of the porous glass by scanning elec-tron microscopy, energy dispersive spectroscopy, X-ray diffraction, and Raman spectra after they had been immersed in simulated body fluid (SBF) for some time, and the porous glass shows good bioactivity.

  13. Macroporous monoliths for trace metal extraction from seawater

    Energy Technology Data Exchange (ETDEWEB)

    Yue, Yanfeng; Mayes, Richard; Gill, Gary A.; Kuo, Li-Jung; Wood, Jordana R.; Binder, Andrew; Brown, Suree; Dai, Sheng

    2015-05-29

    The viability of seawater-based uranium recovery depends on the uranium adsorption rate and capacity, since the concentration of uranium in the oceans is relatively low (3.3 μgL⁻¹). An important consideration for a fast adsorption is to maximize the adsorption properties of adsorbents such as surface areas and pore structures, which can greatly improve the kinetics of uranium extraction and the adsorption capacity simultaneously. Following this consideration, macroporous monolith adsorbents were prepared from the copolymerization of acrylonitrile (AN) and N,N’-methylenebis(acrylamide) (MBAAm) based on a cryogel method using both hydrophobic and hydrophilic monomers. The monolithic sorbents were tested with simulated seawater containing a high uranyl concentration (–6 ppm) and the uranium adsorption results showed that the adsorption capacities are strongly influenced by the ratio of monomer to the crosslinker, i.e., the density of the amidoxime groups. The preliminary seawater testing indicates the high salinity content of seawater does not hinder the adsorption of uranium.

  14. High energy density supercapacitors using macroporous kitchen sponges

    KAUST Repository

    Chen, Wei

    2012-01-01

    Macroporous, low-cost and recyclable kitchen sponges are explored as effective electrode platforms for supercapacitor devices. A simple and scalable process has been developed to fabricate MnO 2-carbon nanotube (CNT)-sponge supercapacitor electrodes using ordinary kitchen sponges. Two organic electrolytes (1 M of tetraethylammonium tetrafluoroborate (Et 4NBF 4) in propylene carbonate (PC), 1 M of LiClO 4 in PC) are utilized with the sponge-based electrodes to improve the energy density of the symmetrical supercapacitors. Compared to aqueous electrolyte (1 M of Na 2SO 4 in H 2O), the energy density of supercapacitors tripled in Et 4NBF 4 electrolyte, and further increased by six times in LiClO 4 electrolyte. The long-term cycling performance in different electrolytes was examined and the morphology changes of the electrode materials were also studied. The good electrochemical performance in both aqueous and organic electrolytes indicates that the MnO 2-CNT-sponge is a promising low-cost electrode for energy storage systems. © 2012 The Royal Society of Chemistry.

  15. Adsorption of Macroporous Phosphonic Acid Resin for Nickel

    Institute of Scientific and Technical Information of China (English)

    XIONG Chunhua; YAO Caiping; LI Jianrong

    2005-01-01

    The adsorption behavior and mechanism of a novel chelate resin, macroporous phosphonic acid resin ( PAR ) for Ni ( Ⅱ ) were investigated. The statically saturated adsorption capacity is 64.3 mg · g - 1 resin at 298 K in HAc-NaAc medium. The Ni( Ⅱ ) adsorbed on PAR can be elated by 0.5mol· L-1 HCl and the elution percentage reaches 96.6% . The resin can be regenerated and reused without obvious decrease in adsorption capacity. The apparent adsorption rate coastant is k298 = 2.6 × 10-5 s -1 . The adsorption behavior of PAR for Ni ( Ⅱ ) obeys the Freundlich isotherm. The thermodynamic adsorption parameters, enthalpy change △ H, free en ergy change △ G and entropy change △ S of PAR for Ni ( Ⅱ ) are 3. 36 kJ· mol-1 , - 5.47 kJ· mol - 1 and 29.6J·mol-1 · K- 1, respectively. The apparent activation energy is Ea =12 . 2 kJ · mol-1 The molar coordination ratio of the functional group of PAR to Ni( Ⅱ ) is about 4: 1. The adsorption mechanism of PAR for Ni( Ⅱ ) was examined by a chemical method and IR spectrometry.

  16. Direct Electrospinning of Ultrafine Fibers with Interconnected Macropores Enabled by in Situ Mixing Microfluidics.

    Science.gov (United States)

    Liu, Wanjun; Zhu, Lei; Huang, Chen; Jin, Xiangyu

    2016-12-21

    Porous ultrafine fibers are of great importance to various applications. Herein, we report a method to directly fabricate macro-porous ultrafine fibers by an in situ mixing microfluidics which allows for the simultaneous electrospinning of solution immediately after mixing. The formation mechanism of macro-pores should be attributed to the incomplete mixing coupled with nonsolvent-induced phase separation, which was elucidated by systematical investigation of various solvent systems and mixing solvents. The diameter of the macro-porous fibers can be tuned from 1.80 ± 0.40 to 6.75 ± 0.48 μm by adjusting the solution concentration and the feeding rate of mixing solvent. The results indicated that macro-porous fibers exhibited higher specific surface area (48.66 ± 8.30 m(2) g(-1)), larger pore size (116.73 nm) and pore volume (0.169 ± 0.007 cm(3) g(-1)) than conventional electrospun porous fibers, enabling the high oil absorption capacities of 95.68, 57.98, and 34.82 g g(-1) for silicon oil, motor oil, and peanut oil, respectively. Our method has greatly expanded the solution scope for electrospinning from stable solution systems to unstable or substable solution systems, thus providing intriguing opportunities for the investigation and fabrication of heterogeneous fibers by in situ mixing of various immiscible solvents/solutions. Our findings can serve as guidelines for the electrospinning of ultrafine fibers with interconnected macro-pores (>50 nm).

  17. Reusable macroporous photonic crystal-based ethanol vapor detectors by doctor blade coating.

    Science.gov (United States)

    Ko, Ya-Ling; Tsai, Hui-Ping; Lin, Kun-Yi; Chen, Ying-Chu; Yang, Hongta

    2017-02-01

    This research reports the development of sensitive and reversible vapor detection by using three-dimensional macroporous photonic crystals. A scalable and roll-to-roll compatible doctor blade coating technology is utilized to fabricate flexible macroporous poly(ethoxylated trimethylolpropane triacrylate) (PETPTA) films with hexagonal close-packed pores which are interconnected. The pores are then coated with a layer of poly(2-hydroxyethyl methacrylate) (PHEMA) to create macroporous PHEMA/PETPTA films. The condensation of vapors in the PHEMA coated macroporous films leads to the increase of both the PHEMA swelling degree and the effective refractive index of the diffractive medium, resulting in the red-shift and amplitude reduction of the optical stop bands. The optical measurements reveal that the diffraction from the as-prepared macroporous photonic crystals sensitively monitors the vapor pressure of ethanol since the PHEMA layer displays a great volume dependence on ethanol due to a decreased Flory-Huggins mixing parameter. The dependence of the diffraction wavelength on vapor pressure and the reproducibility of vapor sensing have also been investigated in this study.

  18. [Purification technology of procymidone residues in ginseng extracts by macroporous resins].

    Science.gov (United States)

    Cui, Li-Li; Zheng, Pei-He; Wang, Ying-Ping

    2014-07-01

    The macroporous resin separation technology has been mainly applied in the enrichment of saponins, flavonoids, alkaloids and other ingredients, and used in the removal of heavy metal impurities and pesticide residues in recent years. This paper focuses on the synthesis of the new-type macroporous adsorption resin LKS-11 according to the molecular structure characteristics of procymidone. Specifically, the selective absorptive property and other advantages of macroporous resin were utilized to analyze the procymidone removal efficiency in ginseng extracts from different sources. The type of macroporous resins, absorptive property and desorption conditions were observed respectively by static and dynamic adsorption methods to determined the optimum process conditions. According to the results, LKS-11 showed a good absorptive property to procymidone in ginseng extracts and provided a theoretical basis for studies on the removal of procymidone residues from ginseng extracts by using macroporous adsorption resin. Because of no secondary pollution on samples, low production and operation costs, high procymidone removal efficiency and high product recovery rate, this method is suitable to be applied in production.

  19. Preparation of Macro-Porous Tin Oxide for Sensing of Sulfur Compound.

    Science.gov (United States)

    Park, No-Kuk; Lee, Tae Hoon; Sung, Yeon Baek; Kim, Yong Sul; Lee, Tae Jin

    2016-03-01

    Macro-porous tin oxide was prepared as an enhanced sensing material for sulfur compounds, such as hydrogen sulfide. Poly-methyl-methacrylate (PMMA) was used as a template for the formation of macro-pores. Tin chloride was used as a precursor for the synthesis of tin oxide, and was impregnated over PMMA beads using a rotary vacuum evaporator. The solid Sn/PMMA material was treated thermally for 4 h at 600 degrees C. The porous morphology of tin oxide prepared in this study was observed by scanning electron microscopy. The surface area of this material measured by the nitrogen adsorption method was approximately 56 m2/g. The crystal structure of the porous material analyzed by XRD was a typical structure of tin oxide. The response of macro-porous tin oxide as a chemical gas sensor was measured using an I-V source meter and the change in signal was observed with the repeated injection of hydrogen sulfide and air. The sensing tests for macro-porous tin oxide were carried out at 200 degrees C and the fast response of macro-porous sensing material was also confirmed.

  20. Characterization, visualization and quantification of soil macropores and preferential flow using SPECT and X-ray CAT scanning

    Science.gov (United States)

    Perret, Johan Sebastien

    The presence of soil macropores provides an opportunity for water and associated chemicals to move preferentially through the vadose zone. Most studies on the characterization of macropore flow consider the soil system to be a "black-box". Thus, efforts to describe macropores in quantitative terms have not yet resulted in a comprehensive theoretical framework that allows for a complete representation of their geometry and their effect on preferential flow. Macropore networks in four large undisturbed soil columns (850 mm x 77 mm diameter), were quantified and visualized, both in 2-D and 3-D, using X-ray Computer Assisted Tomography (CAT). Macropore quantification included two-dimensional parameters (i.e., number of macropores, macropore size, hydraulic radius, rectangularity and circularity), and three-dimensional and topological parameters (i.e., macropore length, volume, 3-D hydraulic radius, tortuosity, numerical density, coordination number, and connectivity). Pores larger or equal to 1.0 mm in equivalent diameter were readily detected, visualized and quantified. It was found that the average macroporosity of four soil columns varied between 2.1 and 3.8%. From the hydraulic radius distribution, it was inferred that about 20% of macropore throats have a diameter of 1.6 mm. It was found that the majority of macropore networks had a length of 40 mm, a volume of 60 mm 3 and a wall area of 175 mm2. Breakthrough of potassium iodide was monitored with X-ray CAT scanning. This approach allowed for real-time examination of flow mechanisms through the macropore and matrix flow domains at various depths along the soil column. Flow in the matrix domain suggested that part of the matrix contains small pores (mesopores) that were connected to macropore networks. It is suggested that the matrix domain should be subdivided into two regions: mesopores and micropores. In addition, the macropore domain should be defined both in terms of macropore geometry and its ability to

  1. Flow and transport processes in a macroporous subsurface-drained glacial till soil

    DEFF Research Database (Denmark)

    Villholth, Karen Grothe; Jensen, Karsten Høgh; Fredericia, Johnny

    1998-01-01

    The qualitative and quantitative effects of macropore flow and transport in an agricultural subsurface-drained glacial till soil in eastern Denmark have been investigated. Three controlled tracer experiments on individual field plots (each approximately 1000 m(2)) were carried out by surface...... was evidenced directly by the rapid (within 10 mm of water input) and abrupt chloride breakthrough in the drainage water at 1.2 m depth in two of the tracer experiments. In the third experiment, the effect of macropore transport was obvious from the rapid and relatively deep penetration of the tracer...... into the soil profile. Dye infiltration experiments in the field as well as in the laboratory supported the recognition of the dominant contribution of macropores to the infiltration and transport process. The soil matrix significantly influenced the tracer distribution by acting as a source or sink...

  2. Separation and Purification of Total Phloroglucinols inDryopteris crassirhizoma with DM-130 Macroporous Adsorption Resin

    Institute of Scientific and Technical Information of China (English)

    Jin Zhe; Huang Jian-ping; Wang He-meng; Ju han-xun; Ren Si-rui; Chang Ying

    2015-01-01

    To improve the purity of the total phloroglucinols fromDryopteris crassirhizoma extracts, the separation and purification conditions of the total phloroglucinols fromDryopteris crassirhizoma were studied with DM-130 macroporous adsorption resin in this study. Adsorption rate, elution rate and purity of the total phloroglucinols were used as indexes to investigate the adsorption and desorption capacity of the total phloroglucinols with DM-130 macroporous adsorption resin. Through the study, the optimum sample concentration of the total phloroglucinols and maximum sample volume were 1.5 mg• mL-1 and 7 BV (210 mL), respectively. The optimum desorption conditions were achieved by using 80% ethanol as desorption solvent at elution flow rate of 1.0 mL• min-1. The result showed DM-130 macroporous adsorption resin performed effective adsorption and desorption. After purification, the purity of the total phloroglucinols increased by 11.5-fold.

  3. DLTS of p-type Czochralski Si wafers containing processing-induced macropores

    Science.gov (United States)

    Simoen, E.; Depauw, V.; Gordon, I.; Poortmans, J.

    2012-01-01

    The deep levels present in p-type Czochralski silicon with processing-induced macropores in the depletion region have been studied by the deep-level transient (DLT) spectroscopy technique. It is shown that a broad band is present for a bias pulse close to the interface with the Al Schottky contact, which exhibits anomalously slow hole capture and is ascribed to the internal interface states of the macropores. For depths beyond the pore region, other deep levels, associated with point defects—possibly metal contamination during the high-temperature annealing step under H2 ambient--have been observed. The impact of the observed defects on the lifetime of thin-film solar cells, fabricated using macropore-based layer transfer is discussed. Finally, it is shown that the presence of pores in the depletion region, which also affects the DLT-spectrum, alters the capacitance-voltage characteristics.

  4. Production and in vitro evaluation of macroporous, cell-encapsulating alginate fibres for nerve repair.

    Science.gov (United States)

    Lin, Sharon Chien-Yu; Wang, Yiwei; Wertheim, David F; Coombes, Allan G A

    2017-04-01

    The prospects for successful peripheral nerve repair using fibre guides are considered to be enhanced by the use of a scaffold material, which promotes attachment and proliferation of glial cells and axonal regeneration. Macroporous alginate fibres were produced by extraction of gelatin particle porogens from wet spun fibres produced using a suspension of gelatin particles in 1.5% w/v alginate solution. Gelatin loading of the starting suspension of 40.0, 57.0, and 62.5% w/w resulted in gelatin loading of the dried alginate fibres of 16, 21, and 24% w/w respectively. Between 45 and 60% of the gelatin content of hydrated fibres was released in 1h in distilled water at 37°C, leading to rapid formation of a macroporous structure. Confocal laser scanning microscopy (CLSM) and image processing provided qualitative and quantitative analysis of mean equivalent macropore diameter (48-69μm), pore size distribution, estimates of maximum porosity (14.6%) and pore connectivity. CLSM also revealed that gelatin residues lined the macropore cavities and infiltrated into the body of the alginate scaffolds, thus, providing cell adhesion molecules, which are potentially advantageous for promoting growth of glial cells and axonal extension. Macroporous alginate fibres encapsulating nerve cells [primary rat dorsal root ganglia (DRGs)] were produced by wet spinning alginate solution containing dispersed gelatin particles and DRGs. Marked outgrowth was evident over a distance of 150μm at day 11 in cell culture, indicating that pores and channels created within the alginate hydrogel were providing a favourable environment for neurite development. These findings indicate that macroporous alginate fibres encapsulating nerve cells may provide the basis of a useful strategy for nerve repair. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. In vitro biological characterization of macroporous 3D Bonelike structures prepared through a 3D machining technique

    Energy Technology Data Exchange (ETDEWEB)

    Laranjeira, M.S.; Dias, A.G. [INEB - Instituto de Engenharia Biomedica, Divisao de Biomateriais, Universidade do Porto, Rua do Campo Alegre, 823, 4150-180 Porto (Portugal); Santos, J.D. [INEB - Instituto de Engenharia Biomedica, Divisao de Biomateriais, Universidade do Porto, Rua do Campo Alegre, 823, 4150-180 Porto (Portugal); Universidade do Porto, Faculdade de Engenharia, Departamento de Engenharia Metalurgica e Materiais, Rua Dr. Roberto Frias, 4200-465 Porto - Portugal (Portugal); Fernandes, M.H., E-mail: mhrf@portugalmail.pt [Universidade do Porto, Faculdade de Medicina Dentaria, Laboratorio de Farmacologia e Biocompatibilidade Celular, Rua Dr. Manuel Pereira da Silva, 4200-392 Porto (Portugal)

    2009-04-30

    3D bioactive macroporous structures were prepared using a 3D machining technique. A virtual 3D structure model was created and a computer numerically controlled (CNC) milling device machined Bonelike samples. The resulting structures showed a reproducible macroporosity and interconnective structure. Macropores size after sintering was approximately 2000 {mu}m. In vitro testing using human bone marrow stroma showed that cells were able to adhere and proliferate on 3D structures surface and migrate into all macropore channels. In addition, these cells were able to differentiate, since mineralized globular structures associated with cell layer were identified. Results obtained showed that 3D structures of Bonelike successfully allow cell migration into all macropores, and allow human bone marrow stromal cells to proliferate and differentiate. This innovative technique may be considered as a step-forward preparation for 3D interconnective macroporous structures that allow bone ingrowth while maintaining mechanical integrity.

  6. Sol-gel synthesis of macroporous barium zirconate monoliths from ionic precursors via a phase separation route

    Science.gov (United States)

    Guo, Xingzhong; Wang, Zichen; Song, Jie; Yang, Hui

    2017-03-01

    Monolithic macroporous barium zirconate derived from ionic precursors has been successfully prepared via a phase separation route in the presence of poly(ethylene oxide) (PEO) and propyleneoxide (PO). Poly(ethylene oxide) (PEO) acts as a phase separation inducer, while propyleneoxide (PO) acts as a gelation accelerant in the sol-gel process. Appropriate choice of poly(ethylene oxide) (PEO) and propyleneoxide (PO) allows the production of continuous macroporous monolithic gel with a porosity of ca. 63% and a macropore size of 1.8 μm. Some BaCl2 recrystallizes in the dried gel, and subsequently tetragonal ZrO2 phase precipitates after heat-treated at 800 °C. The crystalline phase barium zirconate forms after heat treatment at 1100 °C in air, while the macroporous structure is preserved with a slight increase of porosity and a decrease of macropore size.

  7. STUDIES ON THE SORPTION OF MACROPOROUS PHOSPHONIC ACID RESIN FOR LANTHANUM

    Institute of Scientific and Technical Information of China (English)

    XiongChunhua; ChenYiyong; 等

    1998-01-01

    The influences of Medium pH,sorption temperature,sorption time,etc.on the sorption capacity of macroporous phosphonic acid resin for La3+ were determined.The sorption rate constant was k298=7.64×10-5 s-1. The complex ratio of phosphonic groups of the resin to La3+ was 3:1.The basic sorption parameters were determined. The sorption mechanism of macroporous phosphonic acid resin for La3+ was examined by chemical analysis and IR-spectrometry.

  8. Synthesis of N-Doped meso-macroporous carbon and its application to SO2 absorption

    Science.gov (United States)

    Liu, Chao; Zhang, Lei; Hu, Yongqi; Chen, Aibing; Wang, Xiaojing

    2014-12-01

    N-Doped meso-macroporous carbon materials were synthesized using melamine-formaldehyde resin as carbon precursor and silica spheres as a removable template. The as-synthesized carbon materials with a bimodal pores structure (about 3.9 and ˜50-200 nm) display a high surface nitrogen content of 30 wt %. The macropores of carbon materials can be modulated by changing the diameter of template. The SO2 adsorption experiments demonstrate a high adsorption capacity of 78.6 mg g-1 and a considerable stability even over 9 cycles for the carbon materials.

  9. Macroporous Titania Monolith Prepared via Sol-gel Process with Polymer Foam as the Template

    Institute of Scientific and Technical Information of China (English)

    REN, Jian; DU, Zhong-Jie; ZHANG, Chen; LI, Hang-Quan

    2006-01-01

    Macroporous titania monoliths were prepared via sol-gel method using polymer foam as templates. The polymer foam polymerized via concentrated emulsion polymerization was immerged in a solution of titanium(Ⅳ) isopropoxide in 2-propanol, which underwent a sol-gel process. The organic components were subsequently removed by calcination. The effects of various parameters, including the nature of the monomer, the volume fraction of dispersed phase of the concentrated emulsion, and concentration of the sol-gel solution were investigated. The SEM micrographs of the macroporous titania monoliths thus obtained showed that the porous structure of the final material was effectively controllable.

  10. Silica-supported Macroporous Chitosan Bead for Affinity Purification of Trypsin Inhibitor

    Institute of Scientific and Technical Information of China (English)

    Feng Na XI; Jian Min WU; Ming Ming LUAN

    2005-01-01

    Macroporous cross-linking chitosan layer coated on silica gel (CTS-SiO2) was prepared by phase inversion and polyethylene glycol (PEG) molecular imprinting methods. Formation of macroporous surface was investigated by scanning electron microscopy (SEM) and BET analysis.The prepared bead was activated by reacting with 1,2-ethylene diglycidyl ether for introducing epoxy groups, and trypsin could be efficiently immobilized on the bead as a biospecific ligand.The bead bearing trypsin was employed to purify trypsin inhibitor (TIs) from egg white as affinity adsorbent.

  11. Composition

    DEFF Research Database (Denmark)

    2014-01-01

    Memory Pieces are open compositions to be realised solo by an improvising musicians. See more about my composition practise in the entry "Composition - General Introduction". Caution: streaming the sound files will in some cases only provide a few minutes' sample. Please DOWNLOAD them to hear them...

  12. Composition

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2010-01-01

    New Year is an open composition to be realised by improvising musicians. It is included in "From the Danish Seasons" (see under this title). See more about my composition practise in the entry "Composition - General Introduction". This work is licensed under a Creative Commons "by-nc" License. You...

  13. Composition

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2011-01-01

    Strategies are open compositions to be realised by improvising musicians. See more about my composition practise in the entry "Composition - General Introduction". Caution: streaming the sound files will in some cases only provide a few minutes' sample. Please DOWNLOAD them to hear them in full...

  14. Metal-induced fluorescence properties of three-dimensionally ordered macroporous silver inverse opal platforms

    Science.gov (United States)

    Chae, Weon-Sik; Lee, Myung-Jin; Kim, Kisun; Hyun, Jerome K.; Jeon, Seokwoo

    2016-02-01

    This study examined the metal-induced fluorescence properties of three-dimensionally ordered macroporous silver inverse opal (IO) films. Electrochemically synthesized silver IO films with a micrometer cavity exhibited notable fluorescence enhancement at the silver frame, and a decrease in fluorescence lifetime. Numerical calculations supported the observations of a higher fluorescence efficiency at the frame than in the cavity.

  15. Polymer-in-a-Silica-Crust Membranes: Macroporous Materials with Tunable Surface Functionality

    NARCIS (Netherlands)

    Urmenyi, Ana M.; Philipse, Albert P.; Lammertink, Rob G.H.; Wessling, Matthias

    2006-01-01

    We report on alkaline hydrolysis of tetraethoxysilane (Stöber synthesis) inside a macroporous polymer matrix resulting in a homogeneous coverage of silica onto the polymer surface. The encapsulation of the polymer struts by a continuous silica crust allows further functionalization with hydrophilic

  16. [Kinetics of serum albumin adsorption on the macroporous glass MPS-250 GKH].

    Science.gov (United States)

    Naumova, L V; El'Kin, G E; Dmitrenko, L V

    1996-01-01

    Intrinsic diffusion (defined as diffusion within micropores or microgranules) was shown to be a major factor that determines the kinetics of bovine serum albumin adsorption to macroporous silica MPS-250 GKh. The effective coefficient of intrinsic diffusion (within the silica phase) was calculated (Def = 7 x 10(-7) cm2/s).

  17. Isolation of brefeldin A from Eupenicillium brefeldianum broth using macroporous resin adsorption chromatography.

    Science.gov (United States)

    Wang, Ya-Jun; Wu, Ye-Fei; Xue, Feng; Wu, Zhi-Xian; Xue, Ya-Ping; Zheng, Yu-Guo; Shen, Yin-Chu

    2012-05-01

    Brefeldin A (BFA) is a macrolide lactone antibiotic, possessing antitumor, antiviral, antifungal activities. In this work, a separation strategy involving one-step macroporous resin adsorption chromatography combined with crystallization was established for BFA purification from Eupenicillium brefeldianum CCTCC M 208113 fermentation broth. Among six macroporous resin adsorbents tested, the non-polar resin HZ830 had the best adsorption and desorption performance. The static equilibrium adsorption data fitted well with the Freundlich equation, and the adsorption kinetic followed the pseudo-second order model. Through experimental optimization of column adsorption and desorption, BFA in purity of 90.4% (w/w), 92.1% (w/w) yield was obtained by a one-step macroporous resin adsorption chromatography, using a stepwise elution protocol. Furthermore, high purity (>99%, w/w) of BFA crystals were prepared from E. brefeldianum CCTCC M 208113 fermentation broth in an overall recovery of 67.0% (w/w), using a combination of adsorption chromatography packed with non-polar macroporous adsorbent HZ830 and crystallization in acetone. Copyright © 2012 Elsevier B.V. All rights reserved.

  18. Activity and Spatial Distribution of Candida antarctica Lipase B Immobilized on Macroporous Organic Polymeric Adsorbents

    DEFF Research Database (Denmark)

    Nielsen, Anne Veller Friis; Andric, Pavle; Munk Nielsen, Per

    2014-01-01

    A systematic study of the influence of carrier particle size (500 − 850 μ m) and enzyme load (26 200 − 66 100 lipase activity units (LU)/g dry carrier) on the content and activity of Candida antarctica lipase B (CALB) immobilized by adsorption onto macroporous poly(methyl methacrylate) (PMM...

  19. Fabrication of Ordered Macroporous CdS and ZnS by Colloidal Crystal Template

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Ordered macroporous semiconductors CdS and ZnS with regular arrays of spherical pores have been fabricated by poly (styrene-acrylic) (PSA) colloidal crystal template. It was found that the exact three-dimensional (3D) structure of the template had been imprinted in the final material.

  20. Immobilization of denatured DNA to macroporous supports: I. Efficiency of different coupling procedures.

    Science.gov (United States)

    Bünemann, H; Westhoff, P; Herrmann, R G

    1982-11-25

    Methods commonly used for covalent immobilization of single stranded DNA have been applied to several solid supports (Sephadex G-25 and Cellex 410) as well as to a number of macroporous materials (Sepharose C1-6B, C1-2B; Sephacryl S-500 and S-1000). Coupling efficiencies and stability of covalently bound DNA are compared for both classes of materials. The yields of the immobilization reaction for sonicated DNA are only 10-40% for G-25 and Cellex 410 in contrast to 60-80% for C1-6B and S-500. Under optimal conditions, up to 0.5 mg of DNA can be coupled initially per g of wet macroporous material. The immobilized DNAs are lost from the supports in a biphasic manner, with about 10-20% loss per day during the first 2-3 days at 45 degrees C, followed by only about 1% loss per day at the same temperature thereafter. The influence of the coupling procedure on the generation of mismatch effects has been studied in 2.4 M tetraethylammonium chloride solution for the hybrid formation between immobilized and mobile DNA. The degree of mismatch ranged from 0-3% and depended on the method of immobilization. The unspecific absorption of DNA on macroporous materials is sufficiently low to allow efficient hybrid selection. No size limitations have been observed when plastid mRNAs are selected by cloned fragments of plastid DNA immobilized to macroporous Sephacryl S-500.

  1. Rainfall Simulator Experiments to Investigate Macropore Impacts on Hillslope Hydrological Response

    NARCIS (Netherlands)

    Smit, Y.; Teuling, Adriaan J.; van der Ploeg, Martine J.

    2016-01-01

    Understanding hillslope runoff response to intense rainfall is an important topic in hydrology, and is key to correct prediction of extreme stream flow, erosion and landslides. Although it is known that preferential flow processes activated by macropores are an important phenomena in understanding

  2. Macroporous p-GaP Photocathodes Prepared by Anodic Etching and Atomic Layer Deposition Doping.

    Science.gov (United States)

    Lee, Sudarat; Bielinski, Ashley R; Fahrenkrug, Eli; Dasgupta, Neil P; Maldonado, Stephen

    2016-06-29

    P-type macroporous gallium phosphide (GaP) photoelectrodes have been prepared by anodic etching of an undoped, intrinsically n-type GaP(100) wafer and followed by drive-in doping with Zn from conformal ZnO films prepared by atomic layer deposition (ALD). Specifically, 30 nm ALD ZnO films were coated on GaP macroporous films and then annealed at T = 650 °C for various times to diffuse Zn in GaP. Under 100 mW cm(-2) white light illumination, the resulting Zn-doped macroporous GaP consistently exhibit strong cathodic photocurrent when measured in aqueous electrolyte containing methyl viologen. Wavelength-dependent photoresponse measurements of the Zn-doped macroporous GaP revealed enhanced collection efficiency at wavelengths longer than 460 nm, indicating that the ALD doping step rendered the entire material p-type and imparted the ability to sustain a strong internal electric field that preferentially drove photogenerated electrons to the GaP/electrolyte interface. Collectively, this work presents a doping strategy with a potentially high degree of controllability for high-aspect ratio III-V materials, where the ZnO ALD film is a practical dopant source for Zn.

  3. A Hierarchically Micro-Meso-Macroporous Zeolite CaA for Methanol Conversion to Dimethyl Ether

    Directory of Open Access Journals (Sweden)

    Yan Wang

    2016-11-01

    Full Text Available A hierarchical zeolite CaA with microporous, mesoporous and macroporous structure was hydrothermally synthesized by a ”Bond-Blocking” method using organo-functionalized mesoporous silica (MS as a silica source. The characterization by XRD, SEM/TEM and N2 adsorption/desorption techniques showed that the prepared material had well-crystalline zeolite Linde Type A (LTA topological structure, microspherical particle morphologies, and hierarchically intracrystalline micro-meso-macropores structure. With the Bond-Blocking principle, the external surface area and macro-mesoporosity of the hierarchical zeolite CaA can be adjusted by varying the organo-functionalized degree of the mesoporous silica surface. Similarly, the distribution of the micro-meso-macroporous structure in the zeolite CaA can be controlled purposely. Compared with the conventional microporous zeolite CaA, the hierarchical zeolite CaA as a catalyst in the conversion of methanol to dimethyl ether (DME, exhibited complete DME selectivity and stable catalytic activity with high methanol conversion. The catalytic performances of the hierarchical zeolite CaA results clearly from the micro-meso-macroporous structure, improving diffusion properties, favoring the access to the active surface and avoiding secondary reactions (no hydrocarbon products were detected after 3 h of reaction.

  4. A model for simulating the influence of a spatial distribution of large circular macropores on surface runoff

    Science.gov (United States)

    Léonard, J.; Perrier, E.; de Marsily, G.

    2001-12-01

    This paper reports the development and test, at the scale of 1 m2, of an event- based model that aims at simulating the influence of a spatial distribution of large circular macropores on surface runoff. The main originality of this model is that it focuses on the way macropores are supplied with water at the soil surface, by coupling an original model for water interception by individual macropores to a high-resolution spatialized overland flow model. A three-step evaluation of the model was carried out, involving (1) an experimental test of the model for water interception by macropores; (2) a sensitivity analysis of the model to time and space discretization; and (3) a comparison between numerical and field results in the case of runoff on a crusted soil surface with a population of large macropores made by termites in the Sahel. The model was found to accurately simulate the effect of a spatial distribution of large macropores on runoff, and it showed that small heterogeneities, like macropores or areas where a crust has been destroyed, which cover a very limited proportion of the soil surface, can have a high impact on runoff.

  5. In-situ fabrication of macroporous films for dye-sensitised solar cells: formation of the scattering layer and the gelation of electrolytes

    Science.gov (United States)

    Ha, Su-Jin; Moon, Jun Hyuk

    2014-07-01

    Dye-sensitised solar cells (DSCs) are a promising substitute for conventional silicon solar cells. A scattering layer of submicrometer pores or particles has been widely introduced to achieve a high light-harvesting efficiency. However, many such fabrication processes require high temperatures and multiple steps to prepare the scattering layer. Here, we have developed an in-situ fabrication process for a macroporous (MP) scattering film. The macropores were formed inside the assembled cell via the dissolution of polystyrene (PS) spheres from a PS/TiO2 composite layer caused by exposure to an electrolyte solution. Specifically, the in-situ MP scattering layer decreased the transmittance of the electrode film from 58% to below 1%. The DSCs using these MP scattering layers exhibited an increase in the efficiency of 22%. Moreover, the dissolution of the PS improved the cell stability because of the gelation of the electrolyte solution; the efficiency of the DSCs was maintained at 80% of its initial value after ageing for 20 days, whereas the efficiency of the bare-electrode DSCs was found to have decreased by 50%. We believe that in-situ porous scattering layers show great promise for next-generation flexible DSCs. Moreover, this approach can be extended to various applications that utilize porous film/liquid systems.

  6. On-line coupling of macroporous resin column chromatography with direct analysis in real time mass spectrometry utilizing a surface flowing mode sample holder.

    Science.gov (United States)

    Zeng, Shanshan; Wang, Lu; Chen, Teng; Qu, Haibin

    2014-02-06

    A surface flowing mode sample holder was designed as an alternative sampling strategy for direct analysis in real time mass spectrometry (DART-MS). With the sample holder, the on-line coupling of macroporous resin column chromatography with DART-MS was explored and the new system was employed to monitor the column chromatography elution process of Panax notoginseng. The effluent from macroporous resin column was first diluted and mixed with a derivatization reagent on-line, and the mixture was then directly transferred into the ionization region of DART-MS by the sample holder. Notoginsenosides were methylated and ionized in a metastable helium gas stream, and was introduced into MS for detection. The on-line system showed reasonable repeatability with a relative standard deviation of 12.3% for the peak area. Three notoginsenosides, i.e. notoginsenoside R1, ginsenoside Rb1 and ginsenoside Rg1, were simultaneously determined during the eluting process. The alteration of the chemical composition in the effluent was accurately identified in 9 min, agreeing well with the off-line analysis. The presented technique is more convenient compared to the traditional UPLC method. These results suggest that the surface flowing mode DART-MS has a good potential for the on-line process monitoring in the pharmaceutical industry.

  7. Bacteria-Affinity 3D Macroporous Graphene/MWCNTs/Fe3O4 Foams for High-Performance Microbial Fuel Cells.

    Science.gov (United States)

    Song, Rong-Bin; Zhao, Cui-E; Jiang, Li-Ping; Abdel-Halim, Essam Sayed; Zhang, Jian-Rong; Zhu, Jun-Jie

    2016-06-29

    Promoting the performance of microbial fuel cells (MFCs) relies heavily on the structure design and composition tailoring of electrode materials. In this work, three-dimensional (3D) macroporous graphene foams incorporated with intercalated spacer of multiwalled carbon nanotubes (MWCNTs) and bacterial anchor of Fe3O4 nanospheres (named as G/MWCNTs/Fe3O4 foams) were first synthesized and used as anodes for Shewanella-inoculated microbial fuel cells (MFCs). Thanks to the macroporous structure of 3D graphene foams, the expanded electrode surface by MWCNTs spacing, as well as the high affinity of Fe3O4 nanospheres toward Shewanella oneidensis MR-1, the anode exhibited high bacterial loading capability. In addition to spacing graphene nanosheets for accommodating bacterial cells, MWCNTs paved a smoother way for electron transport in the electrode substrate of MFCs. Meanwhile, the embedded bioaffinity Fe3O4 nanospheres capable of preserving the bacterial metabolic activity provided guarantee for the long-term durability of the MFCs. With these merits, the constructed MFC possessed significantly higher power output and stronger stability than that with conventional graphite rod anode.

  8. Fast plasma sintering delivers functional graded materials components with macroporous structures and osseointegration properties.

    Science.gov (United States)

    Godoy, R F; Coathup, M J; Blunn, G W; Alves, A L; Robotti, P; Goodship, A E

    2016-04-13

    We explored the osseointegration potential of two macroporous titanium surfaces obtained using fast plasma sintering (FPS): Ti macroporous structures with 400-600 µmØ pores (TiMac400) and 850-1000 µmØ pores (TiMac850). They were compared against two surfaces currently in clinical use: Ti-Growth® and air plasma spray (Ti-Y367). Each surface was tested, once placed over a Ti-alloy and once onto a CoCr bulk substrate. Implants were placed in medial femoral condyles in 24 sheep. Samples were explanted at four and eight weeks after surgery. Push-out loads were measured using a material-testing system. Bone contact and ingrowth were assessed by histomorphometry and SEM and EDX analyses. Histology showed early osseointegration for all the surfaces tested. At 8 weeks, TiMac400, TiMac850 and Ti-Growth® showed deep bone ingrowth and extended colonisation with newly formed bone. The mechanical push-out force was equal in all tested surfaces. Plasma spray surfaces showed greater bone-implant contact and higher level of pores colonisation with new bone than FPS produced surfaces. However, the void pore area in FPS specimens was significantly higher, yet the FPS porous surfaces allowed a deeper osseointegration of bone to implant. FPS manufactured specimens showed similar osseointegration potential to the plasma spray surfaces for orthopaedic implants. FPS is a useful technology for manufacturing macroporous titanium surfaces. Furthermore, its capability to combine two implantable materials, using bulk CoCr with macroporous titanium surfaces, could be of interest as it enables designers to conceive and manufacture innovative components. FPS delivers functional graded materials components with macroporous structures optimised for osseointegration.

  9. Effect of Sol-Gel Ageing Time on Three Dimensionally Ordered Macroporous Structure of 80SiO2-15CaO-5P2O5 Bioactive Glasses

    Directory of Open Access Journals (Sweden)

    Thanida CHAROENSUK

    2014-04-01

    Full Text Available Three dimensionally ordered macroporous bioactive glasses (3DOM-BGs, namely 80SiO2-15CaO-5P2O5, were synthesized by sol-gel method. PMMA colloidal crystals and non-ionic block copolymers P123 were used as cotemplates. The amorphous 3DOM-BGs had skeletal walls enclosing macropores. Such structure resulted from octahedral and tetrahedral holes of the face-centered cubic (fcc closest packed PMMA templates and windows interconnecting through macropores network. The thicknesses of the walls were around 50 nm – 80 nm and the windows were 90 nm – 110 nm in diameter. These wall thickness is increased by with an increase in ageing time up to 24 h and  then gradually reduced with further increase in aging time. Vibration bands of Si–O–Si and P–O were evident in infrared spectra which are in agreement with EDS spectra indicating Si, P and Ca compositions. After in vitro bioactivity testing by soaking 3DOM-BGs in simulated body fluid at 37 °C, the crystallization of amorphous calcium phosphate layers compatible to the bone component of hydroxyl carbonate apatite were rapidly formed within 3 h. These results indicated that these 3DOM-BGs resembled ideal bone implant materials.DOI: http://dx.doi.org/10.5755/j01.ms.20.1.4755

  10. ADSORPTION DYNAMICS OF MACROPOROUS POL YMERIC ADSORBENT Ⅱ.The Studies on the FIlm DIffusion Mass—Transfer Process

    Institute of Scientific and Technical Information of China (English)

    WANGChunhong; XUMingcheng; 等

    2000-01-01

    The film diffusion mass-transfer process of adsorption of phenol on macroporous polystyrene resin was investigated in detail.In order to revise the Boyd film diffusion kinetics equation,the out-surface structure of the macroporous resin and that of gel-type ion-exchange resin was compared and the new film diffusion equation was also suggested.These results showed that the film diffusion was influenced by porosity of the macroporous resin greatly,which differed from the film diffustion behavior of ion-exchange resin obviously.

  11. Linking air and water transport in intact soils to macropore characteristics inferred from X-ray computed tomography

    DEFF Research Database (Denmark)

    Katuwal, S.; Nørgaard, Trine; Møldrup, Per

    2015-01-01

    Soil macropores often control fluid flow and solute transport, and quantification of macropore characteristics including their variability in space and time are essential to predict soil hydraulic and hydrogeochemical functions. In this study, measurements of air and solute transport properties...... and direct macropore visualization by X-ray CT scanning were carried out on 17 large (19-cm diam.; 20-cm length) undisturbed soil columns sampled across a field site (Silstrup, Denmark) with natural gradients in texture and density. Air permeability (ka) at in-situ water content and -20 hPa of matric...

  12. Composition

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2014-01-01

    Cue Rondo is an open composition to be realised by improvising musicians. See more about my composition practise in the entry "Composition - General Introduction". Caution: streaming the sound/video files will in some cases only provide a few minutes' sample, or the visuals will not appear at all....... Please DOWNLOAD them to see/hear them in full length! This work is licensed under a Creative Commons "by-nc" License. You may for non-commercial purposes use and distribute it, performance instructions as well as specially designated recordings, as long as the author is mentioned. Please see http...

  13. Hierarchically macroporous silver monoliths using Pluronic F127: Facile synthesis, characterization and its application as an efficient biomaterial for pathogens

    Directory of Open Access Journals (Sweden)

    Gowhar Ahmad Naikoo

    2016-03-01

    Full Text Available Herein we report the facile synthesis of three dimensional macroporous (MP silver monoliths serving as intelligent biomaterials against Gram negative (Escherichia coli, Salmonella typhimurium and Gram positive (Bacillus subtilis bacteria with more efficacy against Gram negative bacteria. The macroporous silver monoliths were examined by Fourier transform infra red (FTIR spectroscopy, thermogravimetric analysis (TGA, X-ray diffraction (XRD study, field emission scanning electron microscopy (FESEM, energy dispersion X-ray spectroscopy analysis (EDX and Brunauer–Emmet–Teller (BET adsorption technique. From the antibacterial activity results, it was concluded that macroporous silver monoliths can serve as efficient disinfection agents. The enhanced antibacterial properties of macroporous silver monoliths was possibly due to high surface free energy of the surface Ag+ atoms leading to cell membrane damage followed by cell death.

  14. Fabrication of hydrophobic polymer foams with double acid sites on surface of macropore for conversion of carbohydrate.

    Science.gov (United States)

    Pan, Jianming; Mao, Yanli; Gao, Heping; Xiong, Qingang; Qiu, Fengxian; Zhang, Tao; Niu, Xiangheng

    2016-06-05

    Herein we reported a simple and novel synthetic strategy for the fabrication of two kinds of hydrophobic polymer foam catalysts (i.e. Cr(3+)-HPFs-1-H(+) and HPFs-1-H(+)) with hierarchical porous structure, inhomogeneous acidic composition and Lewis-Brønsted double acid sites distributed on the surface, which was used to one-pot conversion of carbohydrate (such as cellulose, glucose and fructose) to a key chemical platform (i.e. 5-hydroxymethylfurfural, HMF). The water-in-oil (W/O) high internal phase emulsions (HIPEs), stabilized by both Span 80 and acidic prepolymers as analogous particles offered the acidic actives, were used as the template for simultaneous polymerization of oil phase in the presence of divinylbenzene (DVB) and styrene (St). After subsequent ion-exchange process, Lewis and Brønsted acid sites derived from exchanged Cr(3+) and H(+) ion were both fixed on the surface of cell of the catalysts. The HPFs-1-H(+) and Cr(3+)-HPFs-1-H(+) had similar hierarchical porous, hydrophobic surface and acid sites (HPFs-1-H(+) with macropores ranging from 0.1 μm to 20 μm, uniform mesopores in 14.4 nm, water contact angle of 122° and 0.614 mmolg(-1) of Brønsted acid sites, as well as Cr(3+)-HPFs-1-H(+) with macropores ranging from 0.1 μm to 20 μm, uniform mesopores in 13.3 nm, water contact angle of 136° and 0.638 mmolg(-1) of Lewis-Brønsted acid sites). It was confirmed that Lewis acid sites of catalyst had a slight influence on the HMF yield of fructose came from the function of Brønsted acid sites, and Lewis acid sites were in favor of improving the HMF yield from cellulose and glucose. This work opens up a simple and novel route to synthesize multifunctional polymeric catalysts for efficient one-pot conversion of carbohydrate to HMF.

  15. Fabrication, bioactivity, in vitro cytotoxicity and cell viability of cryo-treated nanohydroxyapatite–gelatin–polyvinyl alcohol macroporous scaffold

    Directory of Open Access Journals (Sweden)

    Sanjaya Kumar Swain

    2014-09-01

    Full Text Available Freeze casting and cryogenic treatment both low temperature process have been employed to fabricate nanobiocomposite hydroxyapatite (HA–gelatin–polyvinyl alcohol (PVA macroporous scaffolds from synthesized three different spherical, rod and fibrous HA nanoparticles and composition optimized vis-á-vis porosity architecture, content and compressive strength. A critical HA morphology, solid loading and liquid nitrogen interaction time have a significant effect to enhance the mechanical response of developed scaffolds. Cryo-treated 40 wt.% nanorod HA–gelatin–PVA scaffold posses interconnected pore structure with 80 vol.% porosity, average pore diameter 50–200 μm and highest 5.8 MPa compressive strength. Different degree of the apatite deposition phenomenon in simulated body fluid solution at 37 °C and pH ∼ 7.4 varies with respect to time. In vitro cytotoxicity and L929 mouse fibroblast cell culture in the presence of Dulbecco's Modified Eagle Medium and 10% Fetal Bovine Serum at 37 °C and 5% CO2 atmosphere exhibit excellent cytocompatibility and cell viability at low extract concentration up to 25%.

  16. Synthesis and application of nano-, meso- and macroporous sorbents based on lignin for detoxication of biological fluids

    Science.gov (United States)

    Chopabayeva, Nazira N.; Mukanov, Kanatbek N.; Tasmagambet, Amandyk T.

    2014-05-01

    Novel nano-, meso- and macroporous sorbents based on hydrolysis lignin have been synthesized by catalytic o-alkylation of biolpolymer with epoxy resin ED-20 and subsequent amination of formed α-oxyde derivative. Composition, structure, morphology and physical, chemical properties of ion-exchangers were investigated by FTIR, SEM, TEM, porosimetry and potentiometric titration method. It has been established that alkaline activated lignin shows an increase of SBET to 20.9 m2/g while modification leads to decrease of SBET more than double (from 9.2 to 5.2 m2/g) that of an untreared sample (14.5 m2/g). Synthesized sorbents are characterized by approximately identical mesoporous structure and mainly contained a pore size of 10-14 nm. The results clearly demonstrate the efficiency of lignin based sorbents for the removal of water and lipid soluble toxic metabolites from blood serum of diabetic retinopathy patients. Samples reduced the high level of total cholesterol, including its most atherogenic fractions (LDL-C, VLDL-C), triglyceride to the level of optimum compensated diabetes without significant removal of HDL-C. Concentration of glucose was decreased to physiological norms.

  17. Preparation of the glucose sensor based on three-dimensional ordered macroporous gold film and room temperature ionic liquid

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    A novel type of glucose sensor was fabricated based on a glucose oxidase(GOD)-N,N-dimethtylformamide(DMF)-[BMIm][BF4] composites modified three-dimensional ordered macroporous(3DOM) gold film electrode.The immobilized GOD exhibits a pair of well-defined reversible peaks in 50 mM pH 7.0 phosphate buffer solutions(PBS),which could be attributed to the redox of flavin adenine dinucleotide(FAD) in GOD.The research results show that ionic liquid([BMIm][BF4]),DMF and 3DOM gold film are crucial for GOD to exhibit a pair of stable and reversible peaks.It is believed that the large active area of 3DOM gold film can increase the amount of immobilized GOD.Simultaneously,the application of IL enhances the stability of GOD and facilitates the electron transfer between GOD and the electrode.The synergetic effect of DMF can help the GOD to maintain its bioactivity better.GOD immobilized on the electrode exhibits the favorable electrocatalytic property to glucose,and the prepared sensor has a linear range from 10 to 125 nM with a detection limit of 3.3 nM at a signal-to-noise ratio of 3σ.The apparent Km(Michaelis-Menten constant) for the enzymatic reaction is 0.018 mM.

  18. A Macroporous TiO2 Oxygen Sensor Fabricated Using Anodic Aluminium Oxide as an Etching Mask

    Directory of Open Access Journals (Sweden)

    Sheng-Po Wu

    2010-01-01

    Full Text Available An innovative fabrication method to produce a macroporous Si surface by employing an anodic aluminium oxide (AAO nanopore array layer as an etching template is presented. Combining AAO with a reactive ion etching (RIE processes, a homogeneous and macroporous silicon surface can be effectively configured by modulating AAO process parameters and alumina film thickness, thus hopefully replacing conventional photolithography and electrochemical etch methods. The hybrid process integration is considered fully CMOS compatible thanks to the low-temperature AAO and CMOS processes. The gas-sensing characteristics of 50 nm TiO2 nanofilms deposited on the macroporous surface are compared with those of conventional plain (or non-porous nanofilms to verify reduced response noise and improved sensitivity as a result of their macroporosity. Our experimental results reveal that macroporous geometry of the TiO2 chemoresistive gas sensor demonstrates 2-fold higher (~33% improved sensitivity than a non-porous sensor at different levels of oxygen exposure. In addition, the macroporous device exhibits excellent discrimination capability and significantly lessened response noise at 500 °C. Experimental results indicate that the hybrid process of such miniature and macroporous devices are compatible as well as applicable to integrated next generation bio-chemical sensors.

  19. A macroporous TiO2 oxygen sensor fabricated using anodic aluminium oxide as an etching mask.

    Science.gov (United States)

    Lu, Chih-Cheng; Huang, Yong-Sheng; Huang, Jun-Wei; Chang, Chien-Kuo; Wu, Sheng-Po

    2010-01-01

    An innovative fabrication method to produce a macroporous Si surface by employing an anodic aluminium oxide (AAO) nanopore array layer as an etching template is presented. Combining AAO with a reactive ion etching (RIE) processes, a homogeneous and macroporous silicon surface can be effectively configured by modulating AAO process parameters and alumina film thickness, thus hopefully replacing conventional photolithography and electrochemical etch methods. The hybrid process integration is considered fully CMOS compatible thanks to the low-temperature AAO and CMOS processes. The gas-sensing characteristics of 50 nm TiO(2) nanofilms deposited on the macroporous surface are compared with those of conventional plain (or non-porous) nanofilms to verify reduced response noise and improved sensitivity as a result of their macroporosity. Our experimental results reveal that macroporous geometry of the TiO(2) chemoresistive gas sensor demonstrates 2-fold higher (∼33%) improved sensitivity than a non-porous sensor at different levels of oxygen exposure. In addition, the macroporous device exhibits excellent discrimination capability and significantly lessened response noise at 500 °C. Experimental results indicate that the hybrid process of such miniature and macroporous devices are compatible as well as applicable to integrated next generation bio-chemical sensors.

  20. Three-dimensional ordered macroporous platinum-based electrode for methanol oxidation

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    In this paper, three-dimensional ordered macroporous platinum catalysts with high real surface area were synthesized using the inverted colloidal crystals template technique and have been employed for the electrooxidation of methanol. The morphology and electrocatalytic behavior of the porous Pt electrodes were investigated with atomic force microscopy and electrochemical techniques. For the same amount of Pt deposited, the real surface areas of the electrodes are 9.16 and 8.00 cm2 for the porous electrodes with pore size of 320 and 500 nm respectively, which are more than 5 times larger than the directly deposited Pt electrode (1.4 cm2). The pore size effect on the methanol electrooxidation was investigated by testing low concentration solution of methanol and porous materials with different pore sizes. The synthesized macroporous Pt electrode shows high stability toward the electrooxidation of methanol and is promising for the direct methanol fuel cell.

  1. Macroporous glass monoliths prepared from powdered niobium phosphate glass by fast sintering

    Energy Technology Data Exchange (ETDEWEB)

    Lacerda Mauricio, Vitor; Alves, Oswaldo Luiz; Odone Mazali, Italo, E-mail: mazali@iqm.unicamp.br

    2011-03-15

    Macroporous monoliths were prepared by very fast sintering (between 3 and 15 min) of niobophosphate glass powders at low temperature (1018 K) using cellulose as a foaming agent. The porous materials were analyzed by thermal analysis, Raman spectroscopy, scanning electron microscopy and powder X-ray diffraction, and further investigated using X-ray microtomography, a non-destructive technique capable of reconstructing three-dimensional models of samples and providing structural measurements. The progression of the porosity of the monoliths depends on the sintering time (3 to 15 min) and the amount (up to 50% in mass) of cellulose used. The macroporous glass monoliths may find application in integrated chemical systems and in filtering processes.

  2. Ordered macroporous platinum electrode and enhanced mass transfer in fuel cells using inverse opal structure.

    Science.gov (United States)

    Kim, Ok-Hee; Cho, Yong-Hun; Kang, Soon Hyung; Park, Hee-Young; Kim, Minhyoung; Lim, Ju Wan; Chung, Dong Young; Lee, Myeong Jae; Choe, Heeman; Sung, Yung-Eun

    2013-01-01

    Three-dimensional, ordered macroporous materials such as inverse opal structures are attractive materials for various applications in electrochemical devices because of the benefits derived from their periodic structures: relatively large surface areas, large voidage, low tortuosity and interconnected macropores. However, a direct application of an inverse opal structure in membrane electrode assemblies has been considered impractical because of the limitations in fabrication routes including an unsuitable substrate. Here we report the demonstration of a single cell that maintains an inverse opal structure entirely within a membrane electrode assembly. Compared with the conventional catalyst slurry, an ink-based assembly, this modified assembly has a robust and integrated configuration of catalyst layers; therefore, the loss of catalyst particles can be minimized. Furthermore, the inverse-opal-structure electrode maintains an effective porosity, an enhanced performance, as well as an improved mass transfer and more effective water management, owing to its morphological advantages.

  3. Nitrogen Doped Macroporous Carbon as Electrode Materials for High Capacity of Supercapacitor

    Directory of Open Access Journals (Sweden)

    Yudong Li

    2017-01-01

    Full Text Available Nitrogen doped carbon materials as electrodes of supercapacitors have attracted abundant attention. Herein, we demonstrated a method to synthesize N-doped macroporous carbon materials (NMC with continuous channels and large size pores carbonized from polyaniline using multiporous silica beads as sacrificial templates to act as electrode materials in supercapacitors. By the nice carbonized process, i.e., pre-carbonization at 400 °C and then pyrolysis at 700/800/900/1000 °C, NMC replicas with high BET specific surface areas exhibit excellent stability and recyclability as well as superb capacitance behavior (~413 F ⋅ g−1 in alkaline electrolyte. This research may provide a method to synthesize macroporous materials with continuous channels and hierarchical pores to enhance the infiltration and mass transfer not only used as electrode, but also as catalyst somewhere micro- or mesopores do not work well.

  4. Enhanced Electrocatalytic Activity of Pt/3D Hierarchical Bimodal Macroporous Carbon Nanospheres.

    Science.gov (United States)

    Balgis, Ratna; Widiyastuti, W; Ogi, Takashi; Okuyama, Kikuo

    2017-07-19

    Proton exchange membrane fuel cells require electrocatalysts with a high platinum (Pt) loading, large active surface area, and favorable hydrodynamic profile for practical applications. Here, we report the design of three-dimensional hierarchical bimodal macroporous carbon nanospheres with an interconnected pore system, which are applied as an electrocatalyst support. Carbon-supported Pt (Pt/C) catalysts were prepared by aerosol spray pyrolysis followed by microwave chemical deposition. The hierarchical porous structures not only increased the dispersion of Pt nanoparticles but also improved catalytic performance. A hierarchical bimodal macroporous Pt/C catalyst with a mixture of 30 and 120 nm size pores showed the best performance. The electrochemical surface area and mass activity values of this support were 96 m(2) g(-1)-Pt and 378 mA mg(-1)-Pt, respectively at a Pt loading of 15 wt %.

  5. Double Emulsion Droplets as Microreactors for Synthesis of Magnetic Macroporous Polymer Beads

    Institute of Scientific and Technical Information of China (English)

    Wei-cai Wang; Chao Peng; Kai Shi; Yan-xiong Pan; Hai-shan Zhang; Xiang-ling Ji

    2014-01-01

    An easy method is presented to fabricate monodisperse magnetic macroporous polymer beads (MMPBs).Waterin-oil high intemal phase emulsion (HIPE) is prepared by emulsifying aqueous iron ions solution in an oil phase containing monomers.The HIPE is introduced into a simple microfluidic device to fabricate monodisperse (water-in-oil)-in-water double emulsion droplets.The droplets serve as microreactors to synthesize Fe3O4 nanoparticles and are on-line polymerized to form MMPBs.The prepared MMPBs display uniform size,interconnected porous structure,superparamagnetic behavior and uniform distribution of Fe3O4 in polymer matrix.The MMPBs are characterized by scanning electron microscopy (SEM),Fourier transform infrared spectroscopy (FTIR),X-ray diffraction (XRD),transmission electron microscopy (TEM),vibrating sample magnetometry (VSM).We believe that this method is a universal technique in preparing macroporous nanocomposite beads.

  6. Effect of macroporous adsorption resin-membrane bioreactor hybrid system against fouling for municipal wastewater treatment.

    Science.gov (United States)

    Chen, Weiwei; Luo, Jing; Cao, Ruyi; Li, Yuting; Liu, Jinrong

    2017-01-01

    Membrane bioreactor (MBR) displays significant advantages in effluent quality, sludge production, footprint, and operation. However, membrane fouling limits the application of MBR. This study investigated membrane fouling in a macroporous adsorption resin-membrane bioreactor hybrid system established by adding macroporous adsorption resin (MAR) into MBR. MAR addition increased the critical flux by 27.97%, indicating that membrane fouling was successfully mitigated. Consequently, comparative experiments were designed to analyze the pathway. MAR addition mitigated external fouling development and improved mixed liquor characteristics, thereby mitigating gel layer formation and sludge floc deposition on the membrane surface. MAR effectively reduced the supernatant viscosity and dissolved COD by adsorbing soluble microbial products. Sludge production decreased because the sludge activity in MAR-MBR was inhibited. The fouled MAR could be regenerated effectively by deionized water and chemical cleaning. This work demonstrated the feasibility of using MAR-MBR to mitigate fouling in municipal wastewater treatment. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Macroporous resin purification of peptides with umami taste from soy sauce.

    Science.gov (United States)

    Zhuang, Mingzhu; Zhao, Mouming; Lin, Lianzhu; Dong, Yi; Chen, Huiping; Feng, Mengying; Sun-Waterhouse, Dongxiao; Su, Guowan

    2016-01-01

    In this study, the performance and separation characteristics of four macroporous resins for purifying umami peptides from soy sauce were examined. Results showed that the resins could separate the peptides of soy sauce, and the particle diffusion kinetics model was suitable for describing the whole exothermic (ΔH resins, while the pseudo-second-order kinetics model accurately described the XAD-16 and HP-2 MGL resins. Furthermore, the adsorption processes of the peptides followed the Freundlich model. The XAD-16 resin was the most effective resin for the enrichment of peptides due to its high adsorption and total desorption capacities. Interestingly, the umami peptides were enriched in the deionized water fraction. This study provides new insights into exploring performance and separation characteristics of macroporous resins on soy sauce, and indicated that peptide may be the contributor to the umami taste in Chinese soy sauce.

  8. Bioethanol production by reusable Saccharomyces cerevisiae immobilized in a macroporous monolithic hydrogel matrices.

    Science.gov (United States)

    Mulko, Lucinda; Rivarola, Claudia R; Barbero, Cesar A; Acevedo, Diego F

    2016-09-10

    Performance of yeasts on industrial processes can be dramatically improved by immobilization of the biocatalyst. The immobilization of Saccharomyces cerevisiae inside monolithic macroporous hydrogels were produced by in-situ polymerization of acrylamide around a live yeast suspension under cryogelation conditions. Preculture of the yeasts was not necessary and this innovative and simple procedure is amenable to scaling-up to industrial production. The yeasts were efficiently retained in monolithic hydrogels, presenting excellent mechanical properties and high cell viability. Macroporous hydrogels showed a fast mass transport allowing the hydrogel-yeast complexes achieved similar ethanol yield and productivity than free yeasts, which is larger than those reached with yeasts immobilized in compact hydrogels. Moreover, the same yeasts were able to maintain its activity by up to five reaction cycles with a cell single batch during fermentation reactions.

  9. Synthesis and Textural Characterization of Mesoporous and Meso-/Macroporous Silica Monoliths Obtained by Spinodal Decomposition

    Directory of Open Access Journals (Sweden)

    Anne Galarneau

    2016-04-01

    Full Text Available Silica monoliths featuring either mesopores or flow-through macropores and mesopores in their skeleton are prepared by combining spinodal phase separation and sol-gel condensation. The macroporous network is first generated by phase separation in acidic medium in the presence of polyethyleneoxides while mesoporosity is engineered in a second step in alkaline medium, possibly in the presence of alkylammonium cations as surfactants. The mesoporous monoliths, also referred as aerogels, are obtained in the presence of alkylpolyethylene oxides in acidic medium without the use of supercritical drying. The impact of the experimental conditions on pore architecture of the monoliths regarding the shape, the ordering, the size and the connectivity of the mesopores is comprehensively discussed based on a critical appraisal of the different models used for textural analysis.

  10. Development of macropore arrays in silicon and related technologies for X-ray imaging applications

    OpenAIRE

    Badel, Xavier

    2003-01-01

    Digital devices have started to replace photographic film inX-ray imaging applications. As compared to photographic films,these devices are more convenient to obtain images and tohandle, treat and store these images. The goal of the presentstudy is to develop macropore arrays and related silicontechnologies in order to fabricate X-ray imaging detectors formedical applications, and in particular for dentistry. Althougha few detectors are already available on the market, theirperformances, such...

  11. Hierarchically microporous/macroporous scaffold of magnesium-calcium phosphate for bone tissue regeneration.

    Science.gov (United States)

    Wei, Jie; Jia, Junfeng; Wu, Fan; Wei, Shicheng; Zhou, Huanjun; Zhang, Hongbo; Shin, Jung-Woog; Liu, Changsheng

    2010-02-01

    Hierarchically 3D microporous/macroporous magnesium-calcium phosphate (micro/ma-MCP) scaffolds containing magnesium ammonium phosphate hexahydrate [NH(4)MgPO(4).6H(2)O] and hydroxyapatite [Ca(10)(PO(4))(6)(OH)(2)] were fabricated from cement utilizing leaching method in the presence of sodium chloride (NaCl) particles and NaCl saturated water solution. NaCl particles produced macroporosity, and NaCl solution acted as both cement liquid and porogens, inducing the formation of microporosity. The micro/ma-MCP scaffolds with porosities varied from 52 to 78% showed well interconnected and open macropores with the sizes of 400-500 microm, and degradation of the scaffolds was significantly enhanced in Tris-HCl solution compared with macroporous MCP (ma-MCP) and corresponding calcium phosphate cement (CPC) scaffolds. Cell attachment and proliferation of MG(63) on micro/ma-MCP were significantly better than ma-MCP and CPC scaffolds because of the presence of microporosity, which enhanced the surface area of the scaffolds. Moreover, the alkaline phosphatase (ALP) activity of the MG(63) cells on micro/ma-MCP was significantly higher than ma-MCP and CPC scaffolds at 7 days, and the MG(63) cells with normal phenotype spread well and formed confluent layers across the macroporous walls of the micro/ma-MCP scaffolds. Histological evaluation confirmed that the micro/ma-MCP scaffolds improved the efficiency of new bone regeneration, and exhibited excellent biocompatibility, biodegradability and faster and more effective osteogenesis in vivo.

  12. Monosized macroporous resins with epoxy groups and their structure and gel chromatography properties

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The monosized macroporous-polymer beads based on cross-linked poly(glycidyl methacrylate) have been synthesized by a new improving method--combining dispersion polymerization with swelling polymerization and polymeric solution porogens. The structure and gel chromatographic properties of the resins have been studied. The resins as matrix materials of various types of high performance liquid chromatography (HPLC) packings possess excellent separation properties

  13. Adsorption of Monobutyl Phthalate from Aqueous Phase onto Two Macroporous Anion-Exchange Resins

    OpenAIRE

    Zhengwen Xu; Yunlong Zhao; Jing Shi; Jiangang Lu; Ling Cheng; Mindong Chen

    2014-01-01

    As new emerging pollutants, phthalic acid monoesters (PAMs) pose potential ecological and human health risks. In the present study, adsorption performance of monobutyl phthalate (MBP) onto two macroporous base anion-exchange resins (D-201 and D-301) was discussed. It was found that the adsorption isotherms were best fitted by the Langmuir equation while the adsorption kinetics were well described by pseudo-first-order model. Analyses of sorption isotherms and thermodynamics proved that the ad...

  14. Monodisperse spherical meso-macroporous silica particles: Synthesis and adsorption of biological macromolecules

    Science.gov (United States)

    Stovpiaga, E. Yu.; Grudinkin, S. A.; Kurdyukov, D. A.; Kukushkina, Yu. A.; Nashchekin, A. V.; Sokolov, V. V.; Yakovlev, D. R.; Golubev, V. G.

    2016-11-01

    Monodispersed spherical silica particles, including large mesopores (over 10 nm) and macropores (up to 100 nm) were obtained by chemical etching in an autoclave. A method for introducing globular protein myoglobin molecules into the pores is developed. The method of filling is based on a high adsorption capacity of the developed internal pore structure of the particles. The structure and adsorption properties of the materials are studied.

  15. Current-voltage characteristics in macroporous silicon/SiOx/SnO2:F heterojunctions.

    Science.gov (United States)

    Garcés, Felipe A; Urteaga, Raul; Acquaroli, Leandro N; Koropecki, Roberto R; Arce, Roberto D

    2012-07-25

    We study the electrical characteristics of macroporous silicon/transparent conductor oxide junctions obtained by the deposition of fluorine doped-SnO2 onto macroporous silicon thin films using the spray pyrolysis technique. Macroporous silicon was prepared by the electrochemical anodization of a silicon wafer to produce pore sizes ranging between 0.9 to 1.2 μm in diameter. Scanning electronic microscopy was performed to confirm the pore filling and surface coverage. The transport of charge carriers through the interface was studied by measuring the current-voltage curves in the dark and under illumination. In the best configuration, we obtain a modest open-circuit voltage of about 70 mV and a short-circuit current of 3.5 mA/cm2 at an illumination of 110 mW/cm2. In order to analyze the effects of the illumination on the electrical properties of the junction, we proposed a model of two opposing diodes, each one associated with an independent current source. We obtain a good accordance between the experimental data and the model. The current-voltage curves in illuminated conditions are well fitted with the same parameters obtained in the dark where only the photocurrent intensities in the diodes are free parameters.

  16. Separation of salvianic acid A from the fermentation broth of engineered Escherichia coli using macroporous resins.

    Science.gov (United States)

    Bai, Chen-Long; Zhao, Guang-Rong

    2015-08-01

    Salvianic acid A (also known as danshensu) is a plant-derived polyphenolic acid, and has a variety of physiological and pharmacological activities. Our laboratory previously constructed an unprecedented artificial biosynthetic pathway in Escherichia coli and established the fermentation process to produce salvianic acid A. Here, we developed an efficient method for separating salvianic acid A from the fermentation broth of engineered Escherichia coli by macroporous resins. Among ten tested macroporous resins, the static and dynamic adsorption/desorption experiments demonstrated that X5 resin was the best to separate salvianic acid A from fermentation broth. Other parameters during static and dynamic procedures were also investigated. Under the optimum separation conditions, the average adsorption capacity of SAA were 10.66±0.54 mg/g dry resin and the desorption ratio was 85.6±4.1%. The purity and recovery yield of salvianic acid A in the final dry product were 90.2±1.5 and 81.5±2.3%, respectively. The results show that adsorption separation with macroporous resin X5 was an efficient method to prepare salvianic acid A from fermentation broth. This work will benefit the development and application of plant-derived salvianic acid A and its derivatives. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Ionic liquid-regenerated macroporous cellulose monolith: Fabrication, characterization and its protein chromatography.

    Science.gov (United States)

    Du, Kaifeng

    2017-04-21

    Macroporous cellulose monolith as chromatographic support was successfully fabricated from an ionic liquid dissolved cellulose solution by an emulsification method and followed by the cross-linking reaction and DEAE modification. With the physical characterization, the cellulose monolith featured by both the interconnected macropores in range of 0.5-2.5μm and the diffusion pores centered at about 10nm. Given the bimodal pore system, the monolith possessed the specific surface area of 36.4m(2)g(-1) and the column permeability of about 7.45×10(-14)m(2). After the DEAE modification, the anion cellulose monolith was evaluated for its chromatography performances. It demonstrated that the static and dynamic adsorption capacity of BSA reached about 66.7mgmL(-1) and 43.9mgmL(-1) at 10% breakthrough point, respectively. The results were comparable to other chromatographic adsorbent. In addition, the proteins mixture with different pI was well separated at high flow velocity (611.0cmh(-1)) and high protein recovery (over 97%), proving the macroporous cellulose monolith had excellent separation performance. In this way, the prepared cellulose monolith with bimodal pores system is expected for the potential application in high-speed chromatography. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Human umbilical cord stem cell encapsulation in novel macroporous and injectable fibrin for muscle tissue engineering

    Science.gov (United States)

    Liu, Jun; Xu, Hockin H.K.; Zhou, Hongzhi; Weir, Michael D.; Chen, Qianming; Trotman, Carroll Ann

    2012-01-01

    There has been little research on the seeding of human umbilical cord mesenchymal stem cells (hUCMSCs) in three-dimensional scaffolds for muscle tissue engineering. The objectives of this study were: (i) to seed hUCMSCs in a fibrin hydrogel containing fast-degradable microbeads (dMBs) to create macropores to enhance cell viability; and (ii) to investigate the encapsulated cell proliferation and myogenic differentiation for muscle tissue engineering. Mass fractions of 0–80% of dMBs were tested, and 35% of dMBs in fibrin was shown to avoid fibrin shrinkage while creating macropores and promoting cell viability. This construct was referred to as “dMB35”. Fibrin without dMBs was termed “dMB0”. Microbead degradation created macropores in fibrin and improved cell viability. The percentage of live cells in dMB35 reached 91% at 16 days, higher than the 81% in dMB0 (p muscle tissue engineering applications. PMID:22902812

  19. Macroporous perovskite-type complex oxide catalysts of La_(1-x)K_xCo_(1-y)Fe_yO_3 for diesel soot combustion

    Institute of Scientific and Technical Information of China (English)

    张桂臻; 赵震; 刘坚; 徐俊峰; 荆延妮; 段爱军; 姜桂元

    2009-01-01

    A facile procedure was carried out to prepare macroporous perovskite-type complex oxide catalysts of La1-xKxCo1-yFeyO3(x=0,0.1,y=0,0.1) by using the combined method of organic ligation and solution combustion.This method could ensure the formation of the desired macroporous structures and the desired crystal phases of the prepared catalysts.It was found that the macroporous catalysts showed higher catalytic activities for soot combustion than that of the corresponding nanometric samples,and the macroporous ...

  20. Composites

    Science.gov (United States)

    Taylor, John G.

    The Composites market is arguably the most challenging and profitable market for phenolic resins aside from electronics. The variety of products and processes encountered creates the challenges, and the demand for high performance in critical operations brings value. Phenolic composite materials are rendered into a wide range of components to supply a diverse and fragmented commercial base that includes customers in aerospace (Space Shuttle), aircraft (interiors and brakes), mass transit (interiors), defense (blast protection), marine, mine ducting, off-shore (ducts and grating) and infrastructure (architectural) to name a few. For example, phenolic resin is a critical adhesive in the manufacture of honeycomb sandwich panels. Various solvent and water based resins are described along with resin characteristics and the role of metal ions for enhanced thermal stability of the resin used to coat the honeycomb. Featured new developments include pultrusion of phenolic grating, success in RTM/VARTM fabricated parts, new ballistic developments for military vehicles and high char yield carbon-carbon composites along with many others. Additionally, global regional market resin volumes and sales are presented and compared with other thermosetting resin systems.

  1. 3D structure of macropore networks within natural and de-embarked estuary saltmarsh sediments: towards an improved understanding of network structural control over hydrologic function

    Science.gov (United States)

    Carr, Simon; Spencer, Kate; James, Tempest; Lucy, Diggens

    2015-04-01

    Saltmarshes are globally important environments which, though occupying sea level rise, human population growth, urbanization and pollution resulting in degradation. To compensate for this habitat loss many coastal restoration projects have been implemented over the last few decades, largely driven by legislative requirements for improved biodiversity e.g. the EU Habitats Directive and Birds Directive. However, there is growing evidence that restored saltmarshes, recreated through the return to tidal inundation of previously drained and defended low-lying coastal land, do not have the same species composition even after 100 years and while environmental enhancement has been achieved, there may be consequences for ecosystem functioning This study presents the findings of a comparative analysis of detailed sediment structure and hydrological functioning of equivalent natural and de-embanked saltmarsh sediments at Orplands Farm, Essex, UK. 3D x-ray CT scanning of triplicate undisturbed sediment cores recovered in 2013 have been used to derive detailed volumetric reconstructions of macropore structure and networks, and to infer differences in bulk microporosity between natural and de-embanked saltmarshes. These volumes have been further visualised for qualitative analysis of the main sediment components, and extraction of key macropore space parameters for quantified analysis including total porosity and connectivity, as well as structure, organisation and efficiency (tortuosity) of macropore networks. Although total porosity was significantly greater within the de-embanked saltmarsh sediments, pore networks in these samples were less organised and more tortuous, and were also inferred to have significantly lower micro-porosity than those of the natural saltmarsh. These datasets are applied to explain significant differences in the hydraulic behaviour and functioning observed between natural and de-embarked saltmarsh at Orplands. Piezometer wells and pressure

  2. Effects of the hydraulic conductivity of the matrix/macropore interface on cumulative infiltrations into dual-permeability media

    Science.gov (United States)

    Lassabatere, L.; Peyrard, X.; Angulo-Jaramillo, R.; Simunek, J.

    2009-12-01

    Modeling of water infiltration into the vadose zone is important for better understanding of movement of water-transported contaminants. There is a great need to take into account the soil heterogeneity and, in particular, the presence of macropores or cracks that could generate preferential flow. Several mathematical models have been proposed to describe unsaturated flow through heterogeneous soils. The dual-permeability model (referred to as the 2K model) assumes that flow is governed by Richards equation in both porous regions (matrix and macropores). Water can be exchanged between the two regions following a first-order rate law. Although several studies have dealt with such modeling, no study has evaluated the influence of the hydraulic conductivity of the matrix/macropore interface on water cumulative infiltration. And this is the focus of this study. An analytical scaling method reveals the role of the following main parameters for given boundary and initial conditions: the saturated hydraulic conductivity ratio (R_Ks), the water pressure scale parameter ratio (R_hg), the saturated volumetric water content ratio (R_θs), and the shape parameters of the water retention and hydraulic conductivity functions. The last essential parameter is related to the interfacial hydraulic conductivity (Ka) between the macropore and matrix regions. The scaled 2K flow equations were solved using HYDRUS-1D 4.09 for the specific case of water infiltrating into an initially uniform soil profile and a zero pressure head at the soil surface. A sensitivity of water infiltration was studied for different sets of scale parameters (R_Ks, R_hg, R_θs, and shape parameters) and the scaled interfacial conductivity (Ka). Numerical results illustrate two extreme behaviors. When the interfacial conductivity is zero (i.e., no water exchange), water infiltrates separately into matrix and macropore regions, producing a much deeper moisture front in the macropore domain. In the opposite case

  3. Quantification of 3D macropore networks in forest soils in Touzhai valley (Yunnan, China) using X-ray computed tomography and image analysis

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jia-ming; XU Ze-min; LI Feng; HOU Ru-ji; REN Zhe

    2017-01-01

    The three dimensional (3D) geometry of soil macropores largely controls preferential flow,which is a significant infiltrating mechanism for rainfall in forest soils and affects slope stability.However,detailed studies on the 3D geometry of macropore networks in forest soils are rare.The intense rainfall-triggered potentially unstable slopes were threatening the villages at the downstream of Touzhai valley (Yunnan,China).We visualized and quantified the 3D macropore networks in undisturbed soil columns (Histosols) taken from a forest hillslope in Touzhai valley,and compared them with those in agricultural soils (corn and soybean in USA;barley,fodder beet and red fescue in Denmark) and grassland soils in USA.We took two large undisturbed soil columns (250 mmx250 mm×500 mm),and scanned the soil columns at in-situ soil water content conditions using X-ray computed tomography at a voxel resolution of 0.945 x 0.945 × 1.500 mm3.After reconstruction and visualization,we quantified the characteristics of macropore networks.In the studied forest soils,the main types of macropores were root channels,inter-aggregate voids,macropores without knowing origin,root-soil interface and stone-soil interface.While macropore networks tend to be more complex,larger,deeper and longer.The forest soils have high macroporosity,total macropore wall area density,node density,and large macropore volume,hydraulic radius,mean macropore length,angle,and low tortuosity.The findings suggest that macropore networks in the forest soils have high interconnectivity,vertical continuity,linearity and less vertically oriented.

  4. Composites

    Science.gov (United States)

    Chmielewski, M.; Nosewicz, S.; Pietrzak, K.; Rojek, J.; Strojny-Nędza, A.; Mackiewicz, S.; Dutkiewicz, J.

    2014-11-01

    It is commonly known that the properties of sintered materials are strongly related to technological conditions of the densification process. This paper shows the sintering behavior of a NiAl-Al2O3 composite, and its individual components sintered separately. Each kind of material was processed via the powder metallurgy route (hot pressing). The progress of sintering at different stages of the process was tested. Changes in the microstructure were examined using scanning and transmission electron microscopy. Metal-ceramics interface was clean and no additional phases were detected. Correlation between the microstructure, density, and mechanical properties of the sintered materials was analyzed. The values of elastic constants of NiAl/Al2O3 were close to intermetallic ones due to the volume content of the NiAl phase particularly at low densities, where small alumina particles had no impact on the composite's stiffness. The influence of the external pressure of 30 MPa seemed crucial for obtaining satisfactory stiffness for three kinds of the studied materials which were characterized by a high dense microstructure with a low number of isolated spherical pores.

  5. TRANSPLANTATION OF CRYOPRESERVED FETAL LIVER CELLS SEEDED INTO MACROPOROUS ALGINATE-GELATIN SCAFFOLDS IN RATS WITH LIVER FAILURE

    Directory of Open Access Journals (Sweden)

    D. V. Grizay

    2015-01-01

    Full Text Available Aim. To study the therapeutic potential of cryopreserved fetal liver cells seeded into macroporous alginategelatin scaffolds after implantation to omentum of rats with hepatic failure.Materials and methods.Hepatic failure was simulated by administration of 2-acetyl aminofl uorene followed partial hepatectomy. Macroporous alginate-gelatin scaffolds, seeded with allogenic cryopreserved fetal liver cells (FLCs were implanted into rat omentum. To prevent from colonization of host cells scaffolds were coated with alginate gel shell. Serum transaminase activity, levels of albumin and bilirubin as markers of hepatic function were determined during 4 weeks after failure model formation and scaffold implantation. Morphology of liver and scaffolds after implantation were examined histologically. Results. Macroporous alginate-gelatin scaffolds after implantation to healthy rats were colonized by host cells. Additional formation of alginate gel shell around scaffolds prevented the colonization. Implantation of macroporous scaffolds seeded with cryopreserved rat FLCs and additionally coated with alginate gel shell into omentum of rats with hepatic failure resulted in signifi cant improvement of hepatospecifi c parameters of the blood serum and positive changes of liver morphology. The presence of cells with their extracellular matrix within the scaffolds was confi rmed after 4 weeks post implantation.Conclusion. The data above indicate that macroporous alginate-gelatin scaffolds coated with alginate gel shell are promising cell carriers for the development of bioengineered liver equivalents.

  6. Nanocomposite synthesis by absorption of nanoparticles into macroporous hydrogels. Building a chemomechanical actuator driven by electromagnetic radiation.

    Science.gov (United States)

    Molina, M A; Rivarola, C R; Miras, M C; Lescano, D; Barbero, C A

    2011-06-17

    Macroporous hydrogels irreversibly absorb solid nanoparticles from aqueous dispersions. A nanocomposite is made using a macroporous thermosensitive hydrogel (poly(N-isopropylacrylamide-co-(2-acrylamido-2-methyl propane sulfonic acid)) (poly(NIPAm-co-AMPS)) and conductive polymer (polyaniline, PANI) nanoparticles (PANI NPs). Macroporous gels of poly(NIPAm-co-AMPS) were made by a cryogelation technique. NPs of PANI were produced by precipitation polymerization. It is found that PANI NPs are easily absorbed into the macroporous hydrogels while conventional non-porous hydrogels do not incorporate NPs. It is shown that PANI NPs, dispersed in water, absorb NIR laser light or microwave radiation, increasing their temperature. Upon irradiation of the nanocomposite with microwaves or NIR laser light, the PANI NPs heat up and induce the phase transition of the thermosensitive hydrogel matrix and the internal solution is released. Other nano-objects, such as gold nanorods and PANI nanofibers, are also easily incorporated into the macroporous gel. The resulting nanocomposites also suffer a phase transition upon irradiation with electromagnetic waves. The results suggest that, using a thermosensitive matrix and conducting nanoparticles, mechanical/chemical actuators driven at a distance by electromagnetic radiation can be built. The sensitivity of the nanocomposite to electromagnetic radiation can be modulated by the pH, depending on the nature of the incorporated nanoparticles. Additionally, it is possible to make systems which absorb either NIR or microwaves or both.

  7. Nanocomposite synthesis by absorption of nanoparticles into macroporous hydrogels. Building a chemomechanical actuator driven by electromagnetic radiation

    Energy Technology Data Exchange (ETDEWEB)

    Molina, M A; Rivarola, C R; Miras, M C; Lescano, D; Barbero, C A, E-mail: cbarbero@exa.unrc.edu.ar [Programa de Materiales Avanzados, Departamento de Quimica, Universidad Nacional de Rio Cuarto, Ruta 8, km 601, Agencia postal No 3, 5800 Rio Cuarto (Argentina)

    2011-06-17

    Macroporous hydrogels irreversibly absorb solid nanoparticles from aqueous dispersions. A nanocomposite is made using a macroporous thermosensitive hydrogel (poly(N-isopropylacrylamide-co-(2-acrylamido-2-methyl propane sulfonic acid)) (poly(NIPAm-co-AMPS)) and conductive polymer (polyaniline, PANI) nanoparticles (PANI NPs). Macroporous gels of poly(NIPAm-co-AMPS) were made by a cryogelation technique. NPs of PANI were produced by precipitation polymerization. It is found that PANI NPs are easily absorbed into the macroporous hydrogels while conventional non-porous hydrogels do not incorporate NPs. It is shown that PANI NPs, dispersed in water, absorb NIR laser light or microwave radiation, increasing their temperature. Upon irradiation of the nanocomposite with microwaves or NIR laser light, the PANI NPs heat up and induce the phase transition of the thermosensitive hydrogel matrix and the internal solution is released. Other nano-objects, such as gold nanorods and PANI nanofibers, are also easily incorporated into the macroporous gel. The resulting nanocomposites also suffer a phase transition upon irradiation with electromagnetic waves. The results suggest that, using a thermosensitive matrix and conducting nanoparticles, mechanical/chemical actuators driven at a distance by electromagnetic radiation can be built. The sensitivity of the nanocomposite to electromagnetic radiation can be modulated by the pH, depending on the nature of the incorporated nanoparticles. Additionally, it is possible to make systems which absorb either NIR or microwaves or both.

  8. Formation of a macro-porous SiO2 layer as an anti-reflective coating on glass substrates.

    Science.gov (United States)

    Park, No-Kuk; Kim, Yong Sul; Kim, Min Jung; Lee, Tae Jin; Lee, Seung Hyun; Lee, Seung Hun

    2013-11-01

    A macro-porous silica layer, consisting of a silica layer with macro-sized pores, was formed as an antireflective material on glass substrates. The silica layer and macro-pores were formed by the oxidative thermal decomposition of tetra-ethylorthorsilicate (TEOS) used as the precursor and polystyrene (PS) spherical beads used as the polymer template for the macro-pores at high temperatures. The size of pores was determined by the size of PS beads in the antireflective agent solution. The size of the PS spherical beads can be controlled by changing the concentration of styrene monomer, and the porosity of the macro pore in the silica layer could be controlled by the TEOS/PS ratio. The optimal thermal treating temperature for the formation of a macro-porous silica layer was found to be 650 degrees C. The size of the spherical type macro pores formed in the silica layer on the glass substrate was 100-150 nm. UV-Vis spectrophotometry confirmed the improved antireflective properties of the glass substrate with the macro-porous silica layer.

  9. Impedance measurement for microstructure characterization and internal surface estimation of macroporous silicon

    Energy Technology Data Exchange (ETDEWEB)

    RoyChaudhuri, C. [Department of Electronics and Telecommunication Engineering, Bengal Engineering and Science University, Shibpur, Botanic Garden, Howrah 711103 (India); Jana, M.; Bandopadhyay, N.R. [School of Materials Science and Engineering, Bengal Engineering and Science University, Shibpur, Botanic Garden, Howrah 711103 (India)

    2010-09-15

    In this paper, a simple and convenient method based on impedance measurement has been proposed for the first time to evaluate the average porosity, pore radius, and internal surface area of macroporous silicon structure fabricated by electrochemical method. The porosity and the average pore radius have been obtained by developing a geometrical model and applying the generalized effective medium approximation theory to the dc and ac impedance measurement of both unoxidized and thermally oxidized macroporous silicon. The internal surface area per unit volume is then computed from the porosity and the pore radius using the same model. The method has been applied to a wide range of porosity from 30 to 58% fabricated on p-type <100> silicon with a resistivity of 10-20 {omega} cm. Experimental verification of porosity, mean pore radius, and internal surface area have been performed by standard gravimetric technique and by top-view and cross-section SEM imaging, respectively. A typical mean pore radius, porosity, and internal surface area of a macroporous silicon sample has been obtained to be 1.52 {mu}m, 54.2%, and 3565.7 cm{sup 2}/cm{sup 3}, respectively, from the impedance measurement and 1.5 {mu}m, 55%, and 3666.7 cm{sup 2}/cm{sup 3} from SEM and gravimetric analysis which shows that the results are within 2% of the values obtained by conventional methods. The advantages of this method over the other recently reported techniques for similar characterization have been discussed. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  10. PREPARATION OF MACROPOROUS TIO2 BY STARCH MICROSPHERES TEMPLATE WITH ASSISTANCE OF SUPERCRITICAL CO2

    Directory of Open Access Journals (Sweden)

    Lin-Qi Tang

    2009-02-01

    Full Text Available In this work a green route is reported to prepare a TiO2 macroporous network using corn starch microspheres flake as a bio-template. The starch microspheres prepared by emulsion technology were used as a template into which precursor tetrabutyl titanate (TBOT was permeated using supercritical carbon dioxide (scCO2 as a forceful carrier or infiltration media, resulting in the formation of an organic/inorganic hybrid material; then the coated template was gelled and dried during the scCO2-coating and the depressurization processes, followed by removal of the template by calcination at 700°C; finally, TiO2 inverse-opals-like material reversely replicating the starch microspheres template was obtained. Scanning electron microscopy (SEM, nitrogen sorption measurements, and X-ray diffraction (XRD indicated that the products were the inverse replicas from their templates. The obtained TiO2 inverse opals-like material showed a wide dispersion of pore sizes from mesopores to macropores – a few nanometers to several micrometers –with the BET surface area up to 103 m2/g, and a predominantly anatase crystalline phase. In addition, the wall thickness of the macropores varied with tunable pressure for closed cells or open-cell foams. So this facile and environmentally friendly process for the preparation of high-surface area, thermally-stable, metal-oxide catalysts and supports by a starch microsphere templating approach may have widespread potential applications in catalysis, absorbents, photoelectric materials, and so on.

  11. Development of macroporous calcium phosphate scaffold processed via microwave rapid drying

    Energy Technology Data Exchange (ETDEWEB)

    Jamuna-Thevi, K., E-mail: jamuna@sirim.my [Advanced Materials Research Centre (AMREC), SIRIM Berhad, Lot 34, Jalan Hi-Tech 2/3, Kulim Hi-Tech Park, 09000 Kulim, Kedah (Malaysia); Zakaria, F.A. [Advanced Materials Research Centre (AMREC), SIRIM Berhad, Lot 34, Jalan Hi-Tech 2/3, Kulim Hi-Tech Park, 09000 Kulim, Kedah (Malaysia); Othman, R. [Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal, Penang (Malaysia); Muhamad, S. [Bioassay Unit, Herbal Medicine Research Centre (HMRC), Institute for Medical Research (IMR), Jalan Pahang, 50588 Kuala Lumpur (Malaysia)

    2009-06-01

    Porous hydroxyapatite (HA) scaffold has great potential in bone tissue engineering applications. A new method to fabricate macroporous calcium phosphate (CP) scaffold via microwave irradiation, followed by conventional sintering to form HA scaffold was developed. Incorporation of trisodium citrate dihydrate and citric acid in the CP mixture gave macroporous scaffolds upon microwave rapid drying. In this work, a mixture of {beta}-tricalcium phosphate ({beta}-TCP), calcium carbonate (CaCO{sub 3}), trisodium citrate dihydrate, citric acid and double distilled de-ionised water (DDI) was exposed to microwave radiation to form a macroporous structure. Based on gross eye examinations, addition of trisodium citrate at 30 and 40 wt.% in the CP mixture ({beta}-TCP and CaCO{sub 3}) without citric acid indicates increasing order of pore volume where the highest porosity yield was observed at 40 wt.% of trisodium citrate addition and the pore size was detected at several millimeters. Therefore, optimization of pore size was performed by adding 3-7 wt.% of citric acid in the CP mixture which was separately mixed with 30 and 40 wt.% of trisodium citrate for comparison purposes. Fabricated scaffolds were calcined at 600 deg. C and washed with DDI water to remove the sodium hydroxycarbonate and sintered at 1250 deg. C to form HA phase as confirmed in the X-ray diffraction (XRD) results. Based on Archimedes method, HA scaffolds prepared from 40 wt.% of trisodium citrate with 3-7 wt.% of citric acid added CP mixture have an open and interconnected porous structure ranging from 51 to 53 vol.% and observation using Scanning electron microscope (SEM) showed the pore size distribution between 100 and 500 {mu}m. The cytotoxicity tests revealed that the porous HA scaffolds have no cytotoxic potential on MG63 osteoblast-like cells which might allow for their use as biomaterials.

  12. Macroporous silicon membranes as electron and x-ray transmissive windows

    OpenAIRE

    Schilling, J.; Scherer, A; Gösele, U; Kolbe, M.

    2004-01-01

    Macroporous silicon membranes are fabricated whose pores are terminated with 60 nm thin silicon dioxide shells. The transmission of electrons with energies of 5 kV-25 kV through these membranes was investigated reaching a maximum of 22% for 25 kV. Furthermore, the transmission of electromagnetic radiation ranging from the far-infrared to the x-ray region was determined. The results suggest the application of the membrane as window material for electron optics and energy dispersive x-ray detec...

  13. Synthesis of 3-D ordered macroporous silicate using the template formed from monodispersed polystyrene latex

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Based on the template formed from monodispersed polystyrene (PS) latex, a modified fast sol-gel process was employed to synthesize a three-dimensional ( 3-D ) ordered macroporous silica material after removing the template by calcination at high temperature. It was indicated that there existed highly ordered packed pores within the whole silica material by SEM morphology observation. It was also found that the pores were interconnected. The pore size could be controlled mainly by varying the particle size of the latex ranging from 101 to 102 nm. The formation process of the ordered pores was also preliminarily discussed.

  14. Electrochemical synthesis of macroporous zinc oxide layers by employing hydrogen peroxide as oxygen precursor

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez, Daniel [Laboratoire d' Electrochimie et Chimie Analytique (UMR CNRS 7575), Ecole Nationale Superieure de Chimie de Paris (ENSCP) (France); Instituto de Quimica, Pontificia Universidad Catolica de Valparaiso, Valparaiso (Chile); Bartlett, Philip; Abdelsalam, Mamdouh [School of Chemistry, University of Southampton (United Kingdom); Gomez, Humberto [Instituto de Quimica, Pontificia Universidad Catolica de Valparaiso, Valparaiso (Chile); Lincot, Daniel [Laboratoire d' Electrochimie et Chimie Analytique (UMR CNRS 7575), Ecole Nationale Superieure de Chimie de Paris (ENSCP) (France)

    2008-10-15

    Two- and three-dimensional ordered porous zinc oxide (ZnO) films were prepared by electrodeposition on Indium Tin Oxide coated glass, using two- and three-dimensional poly(styrene) opal templates. The oxide was formed by electrochemical reduction of hydrogen peroxide in aqueous zinc perchlorate solution. Scanning electron microscopy measurements showed well ordered inverse opal structures for macroporous ZnO. At high hydrogen peroxide concentration, dense inner conformal filling was achieved for 2D and 3D structures. The formation of nanocrystalline ZnO was checked by X-ray diffraction. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  15. SYNTHESIS OF SPHERICAL MACROPOROUS ADSORBENT BASED ON UREA—FORMALDEHYDE CONDENSED POLYMER

    Institute of Scientific and Technical Information of China (English)

    XUMingcheng; XUMancai; 等

    2000-01-01

    Spherical macroporous adsorbents with active sites capable of hydrogen bonding adsorption based on urea-formaldehyde condensed polymer were synthesized via reversed suspension polymerization.The properties of the obtained adsorbent were also investigated in detail.The results showed that the water permeability could be improved by adding hydroxyl-contatining organic compound moiety into the adsorbent.The specific surface area and average pore diameter of these adsorbents increaswed while the porosity first increased then decreased with the increase of the amount of the added hydroxyl-containing compound.

  16. Macroporous hydrogels based on 2-hydroxyethyl methacrylate. Part III. Hydrogels as carriers for immobilization of proteins.

    Science.gov (United States)

    Michálek, J; Prádný, M; Artyukhov, A; Slouf, M; Smetana, K

    2005-08-01

    Four series of macroporous hydrogels based on crosslinked copolymers of 2-hydroxyethyl methacrylate (HEMA)-sodium methacrylate (MANa), copolymer HEMA-[2-(methacryloyloxy)ethyl]trimethylammonium chloride (MOETACl), terpolymer HEMA-MANa-MOETACl and on a polyelectrolyte complex were used as carriers for immobilization of proteins, chicken egg white albumin and avidin. The adsorption capacity of the hydrogels for the two proteins, kinetics and pH dependence of albumin adsorption and desorption were studied. The morphology of the hydrogels with and without immobilized albumin was studied by low-vacuum scanning electron microscopy.

  17. Immobilization of denatured DNA to macroporous supports: II. Steric and kinetic parameters of heterogeneous hybridization reactions.

    OpenAIRE

    Bünemann, H

    1982-01-01

    The accessibility of immobilized DNA has been shown to depend more crucially on the method of immobilization than on the type of support used for fixation. When sonicated denatured DNA is coupled via diazotization or via cyanogen bromide reaction to solid Sephadex G-25 and Cellex 410 or to macroporous Sephacryl S-500 and Sepharose C1-6B its accessibility varies from 100 to 24 percent. Generally the loss of accessibility is linked to a depression of the melting temperature of DNA helices forme...

  18. Immobilization of denatured DNA to macroporous supports: I. Efficiency of different coupling procedures.

    OpenAIRE

    Bünemann, H; Westhoff, P; Herrmann, R. G.

    1982-01-01

    Methods commonly used for covalent immobilization of single stranded DNA have been applied to several solid supports (Sephadex G-25 and Cellex 410) as well as to a number of macroporous materials (Sepharose C1-6B, C1-2B; Sephacryl S-500 and S-1000). Coupling efficiencies and stability of covalently bound DNA are compared for both classes of materials. The yields of the immobilization reaction for sonicated DNA are only 10-40% for G-25 and Cellex 410 in contrast to 60-80% for C1-6B and S-500. ...

  19. Nanoporous walls on macroporous foam: rational design of electrodes to push areal pseudocapacitance

    Energy Technology Data Exchange (ETDEWEB)

    Guan, Cao; Fan, Hong Jin [Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University (Singapore); Energy Research Institute, NTU (ERIAN), Nanyang Technological University (Singapore); Li, Xianglin; Wang, Zilong; Soci, Cesare [Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University (Singapore); Cao, Xiehong; Zhang, Hua [School of Materials Science and Engineering, Nanyang Technological University (Singapore)

    2012-08-08

    For application as a pseudocapacitor electrode, highly porous CoO nanowalls are fabricated directly on 3D macroporous nickel foam (see images). A relatively high areal capacitance is achieved because of the porous structure. By grafting the porous nanowalls with another pseudocapacitive oxide, the areal capacitance can be further significantly boosted, owing to the increased surface area caused by the hierarchically porous structure as well as a possible synergetic effect between the two oxides. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. Enrichment and separation of chlorogenic acid from the extract of Eupatorium adenophorum Spreng by macroporous resin.

    Science.gov (United States)

    Liu, Boyan; Dong, Beitao; Yuan, Xiaofan; Kuang, Qirong; Zhao, Qingsheng; Yang, Mei; Liu, Jie; Zhao, Bing

    2016-01-01

    A simple and efficient chromatographic method for separation of chlorogenic acid from Eupatorium adenophorum Spreng extract was developed. The adsorption properties of nine macroporous resins were evaluated. NKA-II resin showed much better adsorption/desorption properties. The adsorption of chlorogenic acid on NKA-II resin at 25°C was well fitted to Langmuir isotherm model and pseudo-second-order kinetic model. The dynamic adsorption and desorption experiments were carried out on columns packed with NKA-II resin to optimize the separation process. The content of chlorogenic acid in the product increased to 22.17%, with a recovery yield of 82.41%.

  1. Distribution threshold values of CaCl2 onto the 10X-zeolite and macro-pore silica gel

    Institute of Scientific and Technical Information of China (English)

    TANG YouCheng; LI Bin; YANG JingChang; CHU Wei; LUO ShiZhong

    2009-01-01

    The calcium chloride used for adsorption separation of ammonia is promising for its large adsorptive capacity and lower desorption temperature, but difficult to develop because of the liable expansion, lump and chip in the adsorption/desorption process. Composite adsorbents made by monolayer dis-persion of calcium chloride onto carriers with high surface areas exhibit better adsorptive capacity and stability. Several models were developed to confirm the maximum monolayer dispersion capacity of calcium chloride onto the carriers (the distribution threshold value), and the closely packed monolayer dispersion model was considered the most suitable for this study. The distribution threshold values given by this model were 0.60 g CaCl2/(g 10X-zeolite) and 0.38 g CaCl2/(g SiO2). When the divalent salt was dispersed onto the carriers, however, anions were separated into two types, causing that the en-tropy of the system tended to increase and the system was not stable. To minimize the entropy, a new model was put forward as the modified closely packed monolayer dispersion model. Based on this model, the distribution threshold values are 0.52 g CaCl2/(g 10X-zeolite) and 0.33 g CaCl2/(g SiO2), re-spectively. The distribution threshold values were also gained experimentally by XRD quantitative phase analysis: 0.61 g CaCl2/(g 10X-zeollte) and 0.31 g CaCl2/(g SiO2). Comparison between experi-mental values of distribution threshold with theoretical ones based on two different model showed that the closely packed monolayer dispersion model fits the monolayer dispersion of calcium chloride onto micro-pore carrier -10X-zeolite, and the modified closely packed monolayer dispersion model is more suitable for the bigger aperture carrier -macro-pore silica gel.

  2. Detachment of affinity-captured bioparticles by elastic deformation of a macroporous hydrogel

    Science.gov (United States)

    Dainiak, Maria B.; Kumar, Ashok; Galaev, Igor Yu.; Mattiasson, Bo

    2006-01-01

    Adsorption of bioparticles to affinity surfaces involves polyvalent interactions, complicating greatly the recovery of the adsorbed material. A unique system for the efficient binding and release of different cells and particles is described. Affinity-bound bioparticles and synthetic particles are detached from the macroporous hydrogel matrix, a so-called cryogel, when the cryogel undergoes elastic deformation. The particle detachment upon elastic deformation is believed to be due to breaking of many of the multipoint attachments between the particles and the affinity matrix and the change in the distance between affinity ligands when the matrix is deformed. However, no release of affinity-bound protein occurred upon elastic deformation. The phenomenon of particle detachment upon elastic deformation is believed to be of a generic nature, because it was demonstrated for a variety of bioparticles of different sizes and for synthetic particles, for different ligand–receptor pairs (IgG–protein A, sugar–ConA, metal ion–chelating ligand), and when the deformation was caused by either external forces (mechanical deformation) or internal forces (the shrinkage of thermosensitive, macroporous hydrogel upon an increase in temperature). The elasticity of cryogel monoliths ensures high recovery of captured cells under mild conditions, with highly retained viability. This property, along with their continuous porous structure makes cryogel monoliths very attractive for applications in affinity cell separation. PMID:16418282

  3. Tension free monofilament macropore polypropylene mesh (Gynemesh PS in female genital prolapse repair

    Directory of Open Access Journals (Sweden)

    Vicente Sola

    2006-08-01

    Full Text Available OBJECTIVES: To review intraoperative and postoperative complications associated to the correction of cystocele and rectocele with polypropylene mesh macropore monofilament (Gynemesh PS using transvaginal free tension technique. MATERIALS AND METHODS: Prospective study of patients that have been submitted to correction of cystocele and/or rectocele between November 2004 and August 2005 in the Urogynecology and Vaginal Surgery Unit of Gynecology and Obstetrics Department, Las Condes Clinic. Mesh was used in 31 patients: 9 for cystocele, 11 for rectocele, and 11 for concomitant meshes. Total mesh used 42. Media age 55 years old, weight 64 kilograms. In 7 patients we used a third mesh for correction of urinary incontinence by TVT-O technique. RESULTS: They did not present intraoperative complications, neither in immediate or delayed postoperative time. We did not observe hematoma, infection, erosion or exposition mesh. Healing of cystocele and rectocele was obtained in 100% of patients, with a pursuit between 1 and 8 months. DISCUSSION: The use of prosthetic polypropylene monofilament macropore mesh in the correction of cystocele and/or rectocele, by transvaginal route with tension free technique seems to be a safe and effective surgery procedure.

  4. Sapropel-based supports as novel macroporous carbon-mineral adsorbents for enzymatic active substances

    Directory of Open Access Journals (Sweden)

    G.A. Kovalenko

    2016-12-01

    Full Text Available The novel macroporous carbon-mineral Sapropel supports were obtained from lacustrine sapropel silts of freshwater lakes by annealing of semi-coke in the inert atmosphere. The specific surface area of these supports varied from 10 to 100 m2/g, the total pore volume from 0.3 cm3/g till 1.6 cm3/g; macropores of diameters more than 2 µm were predominating. The Sapropel supports were studied for the adsorption/adhesion of enzymatic active substances, such as whole bacterial cells, and invertase-active fully destroyed baker's yeast cells (autolysates, and purified enzyme nitrilase. The heterogeneous biocatalysts with required enzymatic activity were prepared and their properties were studied in the corresponding bioconversion processes. The invertase-active biocatalysts exhibited high activity, 120–135 U/g, and stability; the half-times of their inactivation (t½ were more than 1000 h in the continuous process of sucrose hydrolysis at 50 °C. The nitrilase-active biocatalysts for “green” chemistry of nitriles possessed high activity, 350–500 U/g, and the t½ were estimated to be more than 100 h in the periodic process of hydration of acrylonitrile to acrylic acid at 22 °C.

  5. Preparative separation of echinocandin B from Aspergillus nidulans broth using macroporous resin adsorption chromatography.

    Science.gov (United States)

    Zou, Shu-Ping; Liu, Miao; Wang, Qiu-Liang; Xiong, Yan; Niu, Kun; Zheng, Yu-Guo; Shen, Yin-Chu

    2015-01-26

    Echinocandin B (ECB), an echinocandin type of lipopeptide antibiotic produced by Aspergillus nidulans, is a precursor for the synthesis of novel anti-fungal drug - anidulafungin. In this work, a separation strategy involving one-step macroporous resin adsorption chromatography was established for ECB purification from Aspergillus nidulans CCTCC M 2010275 fermentation broth. Among nine macroporous resin adsorbents tested, the non-polar resin HP-20 had the best adsorption and desorption performance. The static equilibrium adsorption data fitted well with the Langmuir equation, and the adsorption kinetic followed the pseudo-second order model. The separation parameters of ECB from broth were optimised by dynamic adsorption/desorption experiments with the column packed with HP-20 resin. Under optimal conditions, the purity increased by 3.8-fold from 23.2% in broth to 88.5% in eluent with 87.1% recovery yield by a one-step treatment. Our study provided a one-step and effective method for large-scale production of ECB, and offered references for separating other echinocandins from broth. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Preparative Separation and Purification of the Total Flavonoids in Scorzonera austriaca with Macroporous Resins.

    Science.gov (United States)

    Xie, Yang; Guo, Qiu-Shi; Wang, Guang-Shu

    2016-06-13

    The use of macroporous resins for the separation and purification of total flavonoids to obtain high-purity total flavonoids from Scorzonera austriaca was studied. The optimal conditions for separation and purification of total flavonoids in S. austriaca with macroporous resins were as follows: D4020 resin columns were loaded with crude flavonoid extract solution, and after reaching adsorptive saturation, the columns were eluted successively with 5 bed volumes (BV) of water, 5 BV of 5% (v/v) aqueous ethanol and 5 BV of 30% (v/v) aqueous ethanol at an elute flow rate of 2 BV·h(-1). Total flavonoids were obtained from the 30% aqueous ethanol eluate by vacuum distillation recovery. The content of flavonoid compounds in the total flavonoids was 93.5%, which represents an improvement by about 150%. In addition, five flavonoid compounds in the product were identified as 2″-O-β-d-xylopyranosyl isoorientin, 6-C-α-l-arabipyranosyl orientin, orientin, isoorientin and vitexin by LC-ESI-MS analysis and internal standard methods. The results in this study could represent a method for the large-scale production of total flavonoids from S. austriaca.

  7. Preparative Separation and Purification of the Total Flavonoids in Scorzonera austriaca with Macroporous Resins

    Directory of Open Access Journals (Sweden)

    Yang Xie

    2016-06-01

    Full Text Available The use of macroporous resins for the separation and purification of total flavonoids to obtain high-purity total flavonoids from Scorzonera austriaca was studied. The optimal conditions for separation and purification of total flavonoids in S. austriaca with macroporous resins were as follows: D4020 resin columns were loaded with crude flavonoid extract solution, and after reaching adsorptive saturation, the columns were eluted successively with 5 bed volumes (BV of water, 5 BV of 5% (v/v aqueous ethanol and 5 BV of 30% (v/v aqueous ethanol at an elute flow rate of 2 BV·h−1. Total flavonoids were obtained from the 30% aqueous ethanol eluate by vacuum distillation recovery. The content of flavonoid compounds in the total flavonoids was 93.5%, which represents an improvement by about 150%. In addition, five flavonoid compounds in the product were identified as 2″-O-β-d-xylopyranosyl isoorientin, 6-C-α-l-arabipyranosyl orientin, orientin, isoorientin and vitexin by LC-ESI-MS analysis and internal standard methods. The results in this study could represent a method for the large-scale production of total flavonoids from S. austriaca.

  8. Separation and Purification of Two Flavone Glucuronides from Erigeron multiradiatus (Lindl. Benth with Macroporous Resins

    Directory of Open Access Journals (Sweden)

    Zhi-feng Zhang

    2009-01-01

    Full Text Available Scutellarein-7-O-β-D-glucuronide (SG and apigenin-7-O-β-D-glucuronide (AG are two major bioactive constituents with known pharmacological effects in Erigeron multiradiatus. In this study, a simple method for preparative separation of the two flavone glucuronides was established with macroporous resins. The performance and adsorption characteristics of eight macroporous resins including AB-8, HPD100, HPD450, HPD600, D100, D101, D141, and D160 have been evaluated. The results confirmed that D141 resin offered the best adsorption and desorption capacities and the highest desorption ratio for the two glucuronides among the tested resins. Sorption isotherms were constructed for D141 resin under optimal ethanol conditions and fitted well to the Freundlich and Langmuir models (R2>0.95. Dynamic adsorption and desorption tests was performed on column packed with D141 resin. After one-run treatment with D141 resin, the two-constituent content in the final product was increased from 2.14% and 1.34 % in the crude extract of Erigeron multiradiatus to 24.63% and 18.42% in the final products with the recoveries of 82.5% and 85.4%, respectively. The preparative separation of SG and AG can be easily and effectively achieved via adsorption and desorption on D141 resin, and the method developed can be referenced for large-scale separation and purification of flavone glucuronides from herbal raw materials.

  9. Preparation of macroporous methacrylate-based monoliths for chromatographic applications by the Reactive Gelation Process.

    Science.gov (United States)

    Bechtle, M; Butté, A; Storti, G; Morbidelli, M

    2010-07-09

    Polymeric monoliths are a relatively new separation medium for chromatographic applications. The innovative approach to produce such monoliths, the Reactive Gelation Process, presented by Marti et al. [1] for polystyrene macroporous materials is applied to a methacrylate-based material. It is shown that it is possible to create a macroporous structure by Reactive Gelation also with this polymer even if the properties of the material are different. Besides the analysis of the material by SEM and BET, several chromatographic methods are used to analyze the material properties. The ISEC experiments showed a much smaller size exclusion effect than in conventional packed beds. The permeability of the material is comparable to a packed bed with 4.13 μm particles. The column efficiency is not changing for increasing flow rates. Because of the high efficiency of the material, shorter columns are needed and therefore the comparatively low permeability is compensated. The monolith also exhibits a significant adsorption capacity for hydrophobic interaction, which makes it suitable for chromatographic purification processes.

  10. Ground Organic Monolith Particles Having a Large Volume of Macropores as Chromatographic Separation Media

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jin Wook; Ali, Faiz; Kim, Yune Sung; Cheong, Won Jo [Inha Univ., Incheon (Korea, Republic of)

    2014-07-15

    A reaction mixture was developed for formation of soft organic monolith that was easily smashed, rinsed, refluxed, filtered, and dried to give monolith particles having high pore volume of macropores. This phase was almost without mesopores. The reaction mixture was composed of methacrylic acid, ethylene glycol dimethacrylate, polyethylene glycol (porogen), and an initiator in a mixed solvent of toluene and isooctane. The selection of porogen and its amount was carefully carried out to obtain the optimized separation efficiency of the resultant phase. The median macropore size was 1.6 μm, and the total pore volume was 3.0-3.4 mL/g. The median particle size (volume based) was 15 μm, and the range of particle size distribution was very broad. Nevertheless the column (1 Χ 300 mm) packed with this phase showed good separation efficiency (N∼10,000-16,000) comparable to that of a commercial column packed with 5 μm C18 silica particles.

  11. Immobilization of denatured DNA to macroporous supports: II. Steric and kinetic parameters of heterogeneous hybridization reactions.

    Science.gov (United States)

    Bünemann, H

    1982-11-25

    The accessibility of immobilized DNA has been shown to depend more crucially on the method of immobilization than on the type of support used for fixation. When sonicated denatured DNA is coupled via diazotization or via cyanogen bromide reaction to solid Sephadex G-25 and Cellex 410 or to macroporous Sephacryl S-500 and Sepharose C1-6B its accessibility varies from 100 to 24 percent. Generally the loss of accessibility is linked to a depression of the melting temperature of DNA helices formed on the support. This correlation shows a characteristic course for a particular coupling method. DNA coupled under denaturing conditions may become totally inaccessible when only 3 percent of its bases are involved in the covalent linkage. Kinetic experiments with sonicated E.coli DNA have shown that the rate constants for renaturation or hybridization reactions are very similar for DNA immobilized by different methods to solid or macroporous supports. Generally the second order rate constant for a heterogeneous reaction (between mobile and immobilized DNA) is about one order of magnitude smaller than that of the analogous homogeneous reaction (in solution).

  12. EFFECTS OF DIFFUSION ON THE KINETICS OF MALTOSE HYDROLYSIS USING GLUCOAMYLASE IMMOBILIZED ON MACROPOROUS SILICA

    Directory of Open Access Journals (Sweden)

    L.R.B. Gonçalves

    1997-12-01

    Full Text Available In this work the effects of diffusion on the hydrolysis of maltose using glucoamylase immobilized on macroporous silica at 30o C are studied. Two different kinds of experimental assays are carried out: one using free enzyme and the other using an enzyme covalently linked to macroporous silica, preactivated with glutaraldehyde. Free enzyme assays are used to estimate the kinetic parameters for hydrolysis of maltose at 30ºC, according to a Michaelis-Menten equation, with inhibition by the product. Runs with the immobilized enzyme enable us to estimate dextrin diffusivities in silica, assuming that the inherent kinetic parameters are equal to the intrinsic ones. The values of kinetic and mass transfer parameters are: K3 = 0.90x10-5 g/U.s, Km = 0.61x10-3 g/ml, Ki = 1.23x10-1 g/ml, DMs = 0.50x10-6 cm2 /s and DGs = 0.55x10-6 cm2 /s

  13. Pore structure of new composite adsorbent SiO2·xH2O·yCaCl2 with high uptake of water from air

    Institute of Scientific and Technical Information of China (English)

    刘业凤; 王如竹

    2003-01-01

    A new composite adsorbent SiO2@xH2O@yCaCl2 which is composed of macro-porous silica gel and calcium chloride is introduced. In order to analyze its adsorption theory, adsorption and desorption isotherms, BET surface areas, pore volumes and average pore diameters of macro-porous silica gel and four composite adsorbent samples with different CaCl2 content are measured using SEM and Asap2010 apparatus. From the adsorption isotherms, desorption isotherms and lag loops, it can be deduced that the main pore structure in macro-porous silica gel and the new composite adsorbent have two shapes: taper with one top open and taper or hyperbolic taper with both ends open. Based on the analysis of pore diameter distribution and lag loop, a sketch map showing calcium chloride filled in pore of macro-porous silica gel is presented. The adsorption isotherms at 25℃ are measured. Experimental results show that the new composite adsorbent can adsorb more water than common adsorbents (macro-porous silica gel, micro-porous silica gel and synthetic zeolite 13X). In the light of the results of pore structure, adsorption isotherms and lyolysis phenomenon are analyzed.

  14. Lattice Boltzmann Modeling of Macro-Porous Flow: Effects of Image Segmentation Algorithms and Comparisons with Observed Data

    Science.gov (United States)

    In this presentation we simulate saturated flow through macroporous soil columns (7.62x18 cm) with a lattice Boltzmann model and compare results with measured saturated hydraulic conductivities. Porous geometry was obtained with an industrial CT scanner yielding a resolution of 119 microns (656x656x...

  15. One-step preparation of macroporous polymer particles with multiple interconnected chambers: a candidate for trapping biomacromolecules.

    Science.gov (United States)

    Qian, Qiuping; Huang, Xiaopeng; Zhang, Xinyue; Xie, Zhigang; Wang, Yapei

    2013-09-27

    Taking advantage of photothermal conversion, the surface pores of water-dispersible single-walled carbon nanotubes assembled on polymer particles were rapidly closed by NIR irradiation to produce macroporous polymeric microspheres with multiple interconnected chambers. These particles can act as smart containers to encapsulate and hold DNA molecules.

  16. Scalable synthesis of hierarchical macropore-rich activated carbon microspheres assembled by carbon nanoparticles for high rate performance supercapacitors

    Science.gov (United States)

    Zhang, Dongdong; Zhao, Jianghong; Feng, Chong; Zhao, Rijie; Sun, Yahui; Guan, Taotao; Han, Baixin; Tang, Nan; Wang, Jianlong; Li, Kaixi; Qiao, Jinli; Zhang, Jiujun

    2017-02-01

    A scalable inverse-microemulsion-polymerization-phase-separation coupling method is applied to successfully prepare hierarchical macropore-rich activated carbon microspheres (ACS) using a phenolic resin (PR) precursor followed by carbonization and KOH activation for the first time. The formed ACS materials are assembled by carbon nanoparticles (CNPs). The macropores interspersed among the component CNPs are formed after removing the non-reactive solvent phase in the course of the polymerization of the reactive PR phase, which occupies ∼64% of the total pore volume (∼2.779 cm3 g-1) of the optimized ACS. In combination with mesopores (∼18% of the total pore volume), the ACS possesses meso/macropores approaching 82% of the total pore volume. Micropores are created in the component CNPs via KOH activation, showing shortened ion transport distances in the nanoscale dimension. Both the hierarchical micro/meso/macroporous structure and the inner nanoparticle morphology (short ion diffusion pathways) can significantly contribute to the rapid transport of electrolyte ions throughout the carbonaceous matrix, resulting in superior rate performance of ACS-based supercapacitors. More importantly, the energy densities of the ACS supercapacitors operating in both aqueous and organic electrolyte retain steady over a wide range of power densities varying dramatically from 0.25 to 14.5 kW kg-1 and to 7.0 kW kg-1, respectively.

  17. Macroporous poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) resins-Versatile immobilization supports for biocatalysts

    NARCIS (Netherlands)

    Miletic, Nemanja; Vukovic, Zorica; Nastasovic, Aleksandra; Loos, Katja; Miletić, Nemanja; Vuković, Zorica; Nastasović, Aleksandra

    2009-01-01

    Crosslinked macroporous hydrophilic poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate)s [abbreviated poly(GMA-co-EGDMA)] with identical chemical structure (60% of glycidyl methacrylate) but with varied average pore sizes (from 30 to 560 nm), specific surface areas (from 13.2 to 106.0 m(2)

  18. Meso-Molding Three-Dimensional Macroporous Perovskites: A New Approach to Generate High-Performance Nanohybrid Catalysts

    DEFF Research Database (Denmark)

    Arandiyan, Hamidreza; Scott, Jason; Wang, Yuan

    2016-01-01

    Newly designed 3D highly ordered macro/mesoporous multifunctional La1-xCexCoO3 nanohybrid frameworks with a 2D hexagonal mesostructure were fabricated via facile meso-molding in a three-dimensionally macroporous perovskite (MTMP) route. The nanohybrid framework exhibited excellent catalytic...

  19. Meso-macroporous Al2O3 supported Ru catalysts for CO preferential oxidation in hydrogen-rich gases

    Institute of Scientific and Technical Information of China (English)

    Limiao Shen; Cheng Zhang; Yuan Liu

    2012-01-01

    Series of meso-macroporous Al2O3 supported Ru catalysts with different loadings were prepared by incipient wetness method and applied to preferential oxidation of CO in hydrogen-rich gases.N2 adsorption-desorption,SEM,XRD,TEM,CO chemisorption and H2-TPR techniques were employed to characterize the catalysts.The results indicate that Ru/Al2O3 catalysts have meso-macroporous structure,high surface area and high metal dispersion.The characterization results of XRD and CO chemisorption indicate the entry of Ru ions into Al2O3 lattice.The results of catalytic performance tests indicate that the meso-macroporous Al2O3 supported Ru catalysts for CO preferential oxidation showed good activity under high space velocity.It is proposed that the macropores in the Ru/Al2O3 catalyst favor mass transfer and mesopores help to improve the dispersion of metal,resulting in the excellent catalytic performance.

  20. Cm-scale Heterogeneity in Degradation - Potential Impact on Leaching of MCPA through a Variably-Saturated Macroporous Clayey Till

    DEFF Research Database (Denmark)

    Rosenbom, Annette Elisabeth; Johnsen, Anders R.; Aamand, Jens;

    both flow and degradation are associated with macropores/wormholes. Results show that cm-scale heterogeneity in degradation potential with simple matrix flow has a negligible effect on MCPA leaching at one meter below soil surface. By introducing a wormhole in the low-permeable 3D-soil modeling domain...

  1. Macroporous poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) resins-Versatile immobilization supports for biocatalysts

    NARCIS (Netherlands)

    Miletic, Nemanja; Vukovic, Zorica; Nastasovic, Aleksandra; Loos, Katja; Miletić, Nemanja; Vuković, Zorica; Nastasović, Aleksandra

    Crosslinked macroporous hydrophilic poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate)s [abbreviated poly(GMA-co-EGDMA)] with identical chemical structure (60% of glycidyl methacrylate) but with varied average pore sizes (from 30 to 560 nm), specific surface areas (from 13.2 to 106.0

  2. Prediction of biopore- and matrix-dominated flow from X-ray CT-derived macropore network characteristics

    Science.gov (United States)

    Naveed, Muhammad; Moldrup, Per; Schaap, Marcel G.; Tuller, Markus; Kulkarni, Ramaprasad; Vogel, Hans-Jörg; Wollesen de Jonge, Lis

    2016-10-01

    Prediction and modeling of localized flow processes in macropores is of crucial importance for sustaining both soil and water quality. However, currently there are no reliable means to predict preferential flow due to its inherently large spatial variability. The aim of this study was to investigate the predictive performance of previously developed empirical models for both water and air flow and to explore the potential applicability of X-ray computed tomography (CT)-derived macropore network characteristics. For this purpose, 65 cylindrical soil columns (6 cm diameter and 3.5 cm height) were extracted from the topsoil (5 cm to 8.5 cm depth) in a 15 m × 15 m grid from an agricultural field located in Silstrup, Denmark. All soil columns were scanned with an industrial X-ray CT scanner (129 µm resolution) and later employed for measurement of saturated hydraulic conductivity, air permeability at -30 and -100 cm matric potential, and gas diffusivity at -30 and -100 cm matric potential. Distribution maps for saturated hydraulic conductivity, air permeability, and gas diffusivity reflected no autocorrelation irrespective of soil texture and organic matter content. Existing empirical predictive models for saturated hydraulic conductivity and air permeability showed poor performance, as they were not able to realistically capture macropore flow. The tested empirical model for gas diffusivity predicted measurements at -100 cm matric potential reasonably well, but failed at -30 cm matric potential, particularly for soil columns with biopore-dominated flow. X-ray CT-derived macroporosity matched the measured air-filled porosity at -30 cm matric potential well. Many of the CT-derived macropore network characteristics were strongly interrelated. Most of the macropore network characteristics were also significantly correlated with saturated hydraulic conductivity, air permeability, and gas diffusivity. The predictive Ahuja et al. (1984) model for saturated hydraulic

  3. Study for highly functional resin (macroporous resin) superior in removing micro particles in PWR primary circuit: on-site test

    Energy Technology Data Exchange (ETDEWEB)

    Itou, A.; Kondo, K.; Kouzuma, Y., E-mail: ayumu_itou@kyuden.co.jp [Kyusyu Electric Power Co., Inc., Minami-ku, Fukuoka (Japan); Umehara, R.; Shimizu, Y., E-mail: Ruyji_Umehara@mhi.co.jp [Mitsubishi Heavy Industries, Ltd., Hyogo-ku, Kobe (Japan); Kogawa, N.; Nagamine, K., E-mail: nkogawa@ndc.hq.mhi.co.jp [Nuclear Development Corp., Tokaimura, Ibaraki (Japan)

    2010-07-01

    In Japanese PWR plants, efforts to remove particulate constituents containing radioactive cobalt which provides a source of radiation exposure, are needed. Performance evaluation study was conducted for macroporous resin which was said to possess excellent performance in removing particulate constituents and whose practical accomplishment at plants in USA was reported to be good. As one of the means for radiation exposure reduction in PWR, a study for application of crud removing resin to actual plant was executed by laboratory experiments using simulated crud (Fe{sub 3}O{sub 4} particle). In this study, following two mechanisms were demonstrated as the particle capturing mechanism of macroporous resin; physical trapping by fine pores on resin surface; electrical adsorption onto resin surface. In addition, in parallel to the study for application of macroporous resin to actual PWR plant, on-site study was planned to investigate the primary system water chemistry during various stages of actual plant operation and to research performance of particle capturing in detail. As the on-site study, column experiments, there water was let pass through the column, were planned for various operation stage (startup period, power operation period and shutdown period). A kind of conventional gel-type resin and three kinds of macroporous resin were examined for onsite tests. As to particulate capturing, basic knowledge regarding capturing efficiency and influence of water chemistry on capturing performance were ordered. Capturing performance of each resin tested became clear and was ordered by comparison. Effectiveness of macroporous resin with regard to crud removal in primary coolant was confirmed. (author)

  4. PLGA microsphere/calcium phosphate cement composites for tissue engineering: in vitro release and degradation characteristics.

    NARCIS (Netherlands)

    Habraken, W.J.E.M.; Wolke, J.G.C.; Mikos, A.G.; Jansen, J.A.

    2008-01-01

    Bone cements with biodegradable poly(lactic-co-glycolic acid) (PLGA) microspheres have already been proven to provide a macroporous calcium phosphate cement (CPC) during in situ microsphere degradation. Furthermore, in vitro/in vivo release studies with these PLGA microsphere/CPC composites (PLGA/CP

  5. Shape Controlled Hierarchical Porous Hydrophobic/Oleophilic Metal-Organic Nanofibrous Gel Composites for Oil Adsorption.

    Science.gov (United States)

    Jayaramulu, Kolleboyina; Geyer, Florian; Petr, Martin; Zboril, Radek; Vollmer, Doris; Fischer, Roland A

    2017-03-01

    A versatile and facile synthetic route toward a ultralight hierarchical poroushybrid composed of metal-organic gels and fluorinated graphene oxide is reported. The composite gels show excellent absorbency of oil and various organic solvents due to their prominent meso/macropores, notable hydrophobicity, and superoleophilicity. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Sol–gel hybrid membranes loaded with meso/macroporous SiO{sub 2}, TiO{sub 2}–P{sub 2}O{sub 5} and SiO{sub 2}–TiO{sub 2}–P{sub 2}O{sub 5} materials with high proton conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Castro, Yolanda, E-mail: castro@icv.csic.es [Instituto de Cerámica y Vidrio, Consejo Superior de Investigaciones Científicas (ICV-CSIC), Campus de Cantoblanco, 28049 Madrid (Spain); Mosa, Jadra, E-mail: jmosa@icv.csic.es [Instituto de Cerámica y Vidrio, Consejo Superior de Investigaciones Científicas (ICV-CSIC), Campus de Cantoblanco, 28049 Madrid (Spain); Aparicio, Mario [Instituto de Cerámica y Vidrio, Consejo Superior de Investigaciones Científicas (ICV-CSIC), Campus de Cantoblanco, 28049 Madrid (Spain); Pérez-Carrillo, Lourdes A.; Vílchez, Susana; Esquena, Jordi [Instituto de Química Avanzada de Cataluña, Consejo Superior de Investigaciones Científicas (IQAC-CSIC), CIBER de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), Jordi Girona 18-26, 08034 Barcelona (Spain); Durán, Alicia [Instituto de Cerámica y Vidrio, Consejo Superior de Investigaciones Científicas (ICV-CSIC), Campus de Cantoblanco, 28049 Madrid (Spain)

    2015-01-15

    In this work, highly conductive hybrid organic–inorganic membranes loaded with SiO{sub 2}, TiO{sub 2}–P{sub 2}O{sub 5} and SiO{sub 2}–TiO{sub 2}–P{sub 2}O{sub 5} meso/macroporous particles were prepared via a sol–gel process. Meso/macroporous particles were incorporated to hybrid membranes, for improving water retention and enhancing electrochemical performance. These particles with a polymodal pore size distribution were prepared by templating in highly concentrated emulsions, the particles showed a specific surface area between 50 m{sup 2}/g (TiO{sub 2}–P{sub 2}O{sub 5}) and 300 m{sup 2}/g (SiO{sub 2}–TiO{sub 2}–P{sub 2}O{sub 5}). The particles were dispersed in a hybrid silica sol and further sprayed onto glass paper. The films were polymerized and sintered; those loaded with meso/macroporous particles had a homogenous distribution. High temperature proton conductivity measurements confirmed a high water retention. Conductivity of these materials is higher than that of Nafion{sup ®} at higher temperatures (120 °C) (2·10{sup −2} S/cm). This study provides processing guideline to achieve hybrid electrolytes for efficient conduction of protons due to their high surface area and porous structure. - Highlights: • Hybrid electrolyte with meso/macroporous particles were synthesized by sol–gel. • Depositions of hybrid solutions by spraying onto glass substrates were performed. • Proton conductivity was evaluated as a function of composition and porous structure.

  7. Hydrothermal synthesis of 2D ordered macroporous ZnO films

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The ZnO films with two-dimensional ordered macroporous structure were successfully fabricated through hydrothermal crystal growth of ZnO on the ZnO substrate covered with a mouolayer of polystyrene (PS) spheres as template.The precursor solution of hydrothermal crystal growth of ZnO were prepared by equitramine (HMT).The confinement effect of the PS spheres template on the growth of ZnO nanorods and the influence of sodium citrate on the crystal growth of ZnO had been studied.The film surface morphology and the preferential growth of ZnO crystal were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD),respectively.Also,the photoluminescence spectrum of ZnO films had been measured,and the corresponding mechanism was discussed.

  8. Separation and purification of rebaudioside A from extract of Stevia Rebaudiana leaves by macroporous adsorption resins

    Directory of Open Access Journals (Sweden)

    Anvari Masoumeh

    2016-03-01

    Full Text Available The separation and purification of rebaudioside A from Stevia rebaudiana crude extracts (Steviosides by macroporous resin were optimized by Taguchi orthogonal array (OA experimental design methodology. This approach was applied to evaluate the influence of five factors (adsorption temperature, desorption time, elution solution ratio, adsorption volume and type of resin on the rebaudioside A yield. The percentage contribution of each factor was also determined. The results showed that elution solution ratio and adsorption volume made the greatest (59.6% and the lowest (1.3% contribution, respectively. The results showed that the Taguchi method is able to model the purification of rebaudioside A process well (R2 > 0.998 and can therefore be applied in future studies conducted in various fields. Adsorption temperature 35°C, desorption time 60min, elution solution ratio 3, adsorption volume 200ml and HPD-400 as resin were the best conditions determined by the Taguchi method.

  9. Noble metals binding on macroporous poly(GMA-co-EGDMA modified with ethylenediamine

    Directory of Open Access Journals (Sweden)

    ANTONIJE ONJIA

    2004-06-01

    Full Text Available Macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate, p(GME, was synthesized by suspension copolymerization and modified by reaction of the pendant epoxy groups with ethylenediamine. The sorption rate and capacity of the modified copolymer, p(GME-en for Rh(III, Au(III and Pt(IV ions were determined in batch experiments under non-competitive conditions. The uptake of Rh(III was faster than those of Au(III and Pt(IV. The sorption capacity for Pt(IV was determined in the pH range 0.9–6.0. The maximum Pt(IV uptake capacity onto p(GME-en at pH 5.5 was 1.30 mmol/g.

  10. ADSORPTION OF TANNIN ACID ONTO AN AMINATED MACROPOROUS RESIN FROM AQUEOUS SOLUTIONS

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A macroporous polymeric adsorbent NG-8 was synthesized with divinylbenzene using conventional suspension polymerization technique. Its aminated product NG-9 was prepared by introducing tertiary amino groups into NG-8 for removal of tannin acid from aqueous solutions. NG-9 could be used directly without a wetting process and had higher adsorption capacity than NG-8, which might be attributed to the enhanced adsorbent-adsorbate interaction due to the tertiary amino groups on the polymeric matrix. The Langmuir equation was successfully employed to describe the adsorption process. The adsorption enthalpy change further validated the uptake of tannin acid on NG-9 to be an enhanced physical adsorption because of the Lewis acid-base interaction. In addition, adsorption kinetic studies testified that the tertiary amino groups on the polymer matrix could decrease the adsorption rate maybe for the hindrance of the tertiary amino groups and water clusters built up.

  11. Visual and reversible carbon dioxide sensing enabled by doctor blade coated macroporous photonic crystals.

    Science.gov (United States)

    Lin, Yi-Han; Suen, Shing-Yi; Yang, Hongta

    2017-11-15

    With significant impacts of carbon dioxide on global climate change, carbon dioxide sensing is of great importance. However, most of the existing sensing technologies are prone to interferences from carbon monoxide, or suffer from the use of sophisticated instruments. This research reports the development of reproducible carbon dioxide sensor using roll-to-roll compatible doctor blade coated three-dimensional macroporous photonic crystals. The pores are functionalized with amine groups to allow the reaction with carbon dioxide in the presence of humidity. The adsorption of carbon dioxide leads to red-shift and amplitude reduction of the optical stop bands, resulting in carbon dioxide detection with visible readout. The dependences of the diffraction wavelength on carbon dioxide partial pressure for various amine-functionalized photonic crystals and different humidities in the environment are systematically investigated. In addition, the reproducibility of carbon dioxide sensing has also been demonstrated in this research. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. ADSORPTION AND DESORPTION OF DSD ACID MANUFACTURING WASTEWATER ON MACROPOROUS RESIN

    Institute of Scientific and Technical Information of China (English)

    LONGChao; ZHANGQuanxing; 等

    2001-01-01

    4,4'-diaminostilbene-2,2'-disulfonic acid (DSD acid) manufacturing wastewater was treated by a macroporous resin in a fixed-bed column.The results showed that this method was suitable for removal of chemical oxygen demands(COD) and color,About 91% COD and 99.5% color removal were obtained under the optimum adsorption conditions.i.e.temperature 20℃,flow rate lbed volume/hour(BV/hr)and pH1-2.The resin was efficiently regenerated with aqueous sodium hydroxide and water.Furthermore,65.5% of 4,4'-dinitrostilbene-2,2'-disulfonic acid(DNS) could be recovered from wastewater for possible recycling to the manufactureing process.The adsorption capacity of resin remained constant during the repetition process of adsorption and desorption.

  13. Risk predicting of macropore flow using pedotransfer functions, textural maps and modeling

    DEFF Research Database (Denmark)

    Iversen, Bo Vangsø; Børgesen, Christen Duus; Lægdsmand, Mette;

    2011-01-01

    using combinations of different soil physical parameters. The neural network was able to develop reasonably accurate PTFs predicting log[k(−1)], whereas the prediction of log(Ks) was less accurate. Using the distributed data of the hydraulic properties derived from the PTFs, outputs of water flow...... of this study were first to develop pedotransfer functions (PTFs) predicting near-saturated [k(−1)] and saturated (Ks) hydraulic conductivity using simple soil parameters as predictors and second to use this information and a newly developed rasterbased soil property map of Denmark to identify risk areas...... for macropore flow. The data set was based on hydraulic measurements on large, undisturbed soil columns from different localities in Denmark. Unsaturated [k(h)] and saturated hydraulic conductivity were measured in the laboratory; k(−1) representing the hydraulic conductivity of the soil matrix...

  14. Adsorption of Monobutyl Phthalate from Aqueous Phase onto Two Macroporous Anion-Exchange Resins

    Directory of Open Access Journals (Sweden)

    Zhengwen Xu

    2014-01-01

    Full Text Available As new emerging pollutants, phthalic acid monoesters (PAMs pose potential ecological and human health risks. In the present study, adsorption performance of monobutyl phthalate (MBP onto two macroporous base anion-exchange resins (D-201 and D-301 was discussed. It was found that the adsorption isotherms were best fitted by the Langmuir equation while the adsorption kinetics were well described by pseudo-first-order model. Analyses of sorption isotherms and thermodynamics proved that the adsorption mechanisms for DBP onto D-201 were ion exchange. However, the obtained enthalpy values indicate that the sorption process of MBP onto D-301 is physical adsorption. The equilibrium adsorption capacities and adsorption rates of DBP on two different resins increased with the increasing temperature of the solution. D-301 exhibited a higher adsorption capacity of MBP than D-201. These results proved that D-301, as an effective sorbent, can be used to remove phthalic acid monoesters from aqueous solution.

  15. Preparation of Aminated Macroporous Polyvinyl Alcohol Resins and Evaluation for Bilirubin Adsorption

    Institute of Scientific and Technical Information of China (English)

    WANG Wei-chao; ZHANG Sheng-nan; HU Yue-han; XIE Hui; OU Lai-liang; YU Yao-ting; KONG De-ling; GU Han-qing

    2008-01-01

    In the present study we prepared macroporous polyvinyl alcohol beads. A series of bilirubin adsorbents were generated by immobilization of eight amine agents to the beads as ligands. The adsorption of bilirubin was evaluated by in vitro static and dynamic adsorption tests. The results show that these adsorbents have excellent adsorption efficiency and capacity. Among the eight ligands, trimethylamine (TMA), triethylamine (TEA) and 1,6- hexanediamine(HAD) showed the highest adsorption capacity. The adsorption equilibrium can be achieved in half an hour, and the adsorption percentage of bilirubin was up to 80%. Static electricity and hydrophobic interaction played the main role in bilirubin adsorption, and the adsorption was found to match the monolayer model. The excellent adsorption of these adsorbents indicates their potential in clinical treatment.

  16. Extraction of anthocyanins from black bean canning wastewater with macroporous resins.

    Science.gov (United States)

    Wang, Xiaoxi; Hansen, Conly; Allen, Karin

    2014-02-01

    This study investigated purification of anthocyanins from black bean canning wastewater by column chromatography with 5 types of macroporous resins (Diaion Hp20, Sepabeads Sp70, Sepabeads Sp207, Sepabeads Sp700, and Sepabeads Sp710). By-product of canned black beans was partially purified by filtration, in anticipation of higher performance during column chromatography. Equilibrium adsorption isotherms were measured and analyzed using Langmuir and Freundlich isotherm models. Both Langmuir (all R² ≥ 0.98) and Freundlich (all R² ≥ 0.97) models can describe the adsorption process of anthocyanins from black bean canning wastewater using the tested resins. The adsorption and desorption behaviors of anthocyanins were studied using a dynamic method on the 5 types of resins, and Sp700 presented the highest adsorption capacity (39 ± 4 mg/g; P canning wastewater.

  17. Formation of photoluminescent n-type macroporous silicon: Effect of magnetic field and lateral electric potential

    Energy Technology Data Exchange (ETDEWEB)

    Antunez, E.E. [Centro de Investigación en Ingeniería y Ciencias Aplicadas, UAEM, Av. Universidad 1001, Col. Chamilpa, Cuernavaca, Morelos, CP 62210 (Mexico); Estevez, J.O. [Instituto de Física, B. Universidad Autónoma de Puebla, A.P. J-48, Puebla 72570 (Mexico); Campos, J. [Instituto de Energías Renovables, UNAM, Priv. Xochicalco S/N, Temixco, Morelos, CP 62580 (Mexico); Basurto-Pensado, M.A. [Centro de Investigación en Ingeniería y Ciencias Aplicadas, UAEM, Av. Universidad 1001, Col. Chamilpa, Cuernavaca, Morelos, CP 62210 (Mexico); Agarwal, V., E-mail: vagarwal@uaem.mx [Centro de Investigación en Ingeniería y Ciencias Aplicadas, UAEM, Av. Universidad 1001, Col. Chamilpa, Cuernavaca, Morelos, CP 62210 (Mexico)

    2014-11-15

    Metal electrode-free electrochemical etching of low doped n-type silicon substrates, under the combined effect of magnetic and lateral electric field, is used to fabricate photoluminescent n-type porous silicon structures in dark conditions. A lateral gradient in terms of structural characteristics (i.e. thickness and pore dimensions) along the electric field direction is formed. Enhancement of electric and magnetic field resulted in the increase of pore density and a change in the shape of the macropore structure, from circular to square morphology. Broad photoluminescence (PL) emission from 500 to 800 nm, with a PL peak wavelength ranging from 571 to 642 nm, is attributed to the wide range of microporous features present on the porous silicon layer.

  18. ADSORPTION AND DESORPTION OF DSD ACID MANUFACTURING WASTEWATER ON MACROPOROUS RESIN

    Institute of Scientific and Technical Information of China (English)

    LONG Chao; ZHANG Quanxing; XU Zhaoyi; CHEN Jinlong; LI Aimin; CHENG Zhiqiang

    2001-01-01

    4,4'-diaminostilbene-2, 2'-disulfonic acid (DSD acid) manufacturing wastewater was treated by a macroporous resin in a fixed-bed column. The results showed that this method was suitable for removal of chemical oxygen demands (COD) and color About 91% COD and 99.5% color removal were obtained under the optimum adsorption conditions, i.e. temperature 20 ℃, flow rate 1 bed volume/hour (BV/hr) and pH1-2. The resin was efficiently regenerated with aqueous sodium hydroxide and water. Furthermore, 65.5% of 4, 4 '-dinitrostilbene-2, 2 '-disulfonic acid (DNS) could be recovered from wastewater for possible recycling to the manufacturing process. The adsorption capacity of resin remained constant during the repetition process of adsorption and desorption.

  19. Effect of tillage on macropore flow and phosphorus transport to tile drains

    Science.gov (United States)

    Williams, Mark R.; King, Kevin W.; Ford, William; Buda, Anthony R.; Kennedy, Casey D.

    2016-04-01

    Elevated phosphorus (P) concentrations in subsurface drainage water are thought to be the result of P bypassing the soil matrix via macropore flow. The objectives of this study were to quantify event water delivery to tile drains via macropore flow paths during storm events and to determine the effect of tillage practices on event water and P delivery to tiles. Tile discharge, total dissolved P (DP) and total P (TP) concentrations, and stable oxygen and deuterium isotopic signatures were measured from two adjacent tile-drained fields in Ohio, USA during seven spring storms. Fertilizer was surface-applied to both fields and disk tillage was used to incorporate the fertilizer on one field while the other remained in no-till. Median DP concentration in tile discharge prior to fertilizer application was 0.08 mg L-1 in both fields. Following fertilizer application, median DP concentration was significantly greater in the no-tilled field (1.19 mg L-1) compared to the tilled field (0.66 mg L-1), with concentrations remaining significantly greater in the no-till field for the remainder of the monitored storms. Both DP and TP concentrations in the no-till field were significantly related to event water contributions to tile discharge, while only TP concentration was significantly related to event water in the tilled field. Event water accounted for between 26 and 69% of total tile discharge from both fields, but tillage substantially reduced maximum contributions of event water. Collectively, these results suggest that incorporating surface-applied fertilizers has the potential to substantially reduce the risk of P transport from tile-drained fields.

  20. A macroporous bioreactor super activated by the recombinant human transforming growth factor-beta 3

    Directory of Open Access Journals (Sweden)

    Ugo eRipamonti

    2012-06-01

    Full Text Available Macroporous single-phase hydroxyapatite (HA and biphasic HA/β-tricalcium phosphate with 33% post-sinter hydroxyapatite (HA/β-TCP were combined with 25 or 125 µg recombinant human transforming growth factor-β3 (hTGF-β3 to engineer a super activated bioreactor implanted in orthotopic calvarial and heterotopic rectus abdominis muscle sites and harvested on day 30 and 90. Coral-derived calcium carbonate fully converted (100% and partially converted to 5% and 13% hydroxyapatite/calcium carbonate (HA/CC preloaded with 125 and 250 µg hTGF-β3, and 1:5 and 5:1 binary applications of hTGF-β3: hOP-1 by weight, were implanted in the rectus abdominis and harvested on day 20 and 30, respectively, to monitor spatial/temporal morphogenesis by high doses of hTGF-β3. Bone formation was assessed on decalcified paraffin-embedded sections by measuring the fractional volume of newly-formed bone. On day 30 and 90, single phase HA implants showed greater amounts of bone when compared to biphasic specimens; 5 % and 13 % HA/CC pre-loaded with 125 and 250 µg hTGF-β3 showed substantial induction of bone formation; 250 µg hTGF-β3 induced as yet unreported massive induction of bone formation as early as 20 days prominently outside the profile of the macroporous constructs. The induction of bone formation is controlled by the implanted ratio of the recombinant morphogens, i.e. the 1:5 hTGF-β3:hOP-1 ratio by weight was greater than the inverse ratio. The unprecedented tissue induction by single doses of 250 µg hTGF-β3 resulting in rapid bone morphogenesis of vast mineralized ossicles with multiple trabeculations surfaced by contiguous secreting osteoblasts is the novel molecular and morphological frontier for the induction of bone formation in clinical contexts.

  1. Delta-sleep inducing peptide entrapment in the charged macroporous matrices

    Energy Technology Data Exchange (ETDEWEB)

    Sukhanova, Tatiana V., E-mail: sukhanovat@mail.ru [Shemyakin and Ovchinnikov Institute of Bioorganic Chemistry, Laboratory of Cell Interactions, Miklukho-Maklaya st., 16/10 Moscow (Russian Federation); Artyukhov, Alexander A.; Gurevich, Yakov M.; Semenikhina, Marina A. [Mendeleyev University of Chemical Technology of Russia, Research and Teaching Center “Biomaterials”, Miusskaya sq., 9 Moscow (Russian Federation); Prudchenko, Igor A. [Shemyakin and Ovchinnikov Institute of Bioorganic Chemistry, Laboratory of Peptide Chemistry, Miklukho-Maklaya st., 16/10 Moscow (Russian Federation); Shtilman, Mikhail I. [Mendeleyev University of Chemical Technology of Russia, Research and Teaching Center “Biomaterials”, Miusskaya sq., 9 Moscow (Russian Federation); Markvicheva, Elena A. [Shemyakin and Ovchinnikov Institute of Bioorganic Chemistry, Laboratory Polymers for Biology, Miklukho-Maklaya st., 16/10 Moscow (Russian Federation)

    2014-09-01

    Various biomolecules, for example proteins, peptides etc., entrapped in polymer matrices, impact interactions between matrix and cells, including stimulation of cell adhesion and proliferation. Delta-sleep inducing peptide (DSIP) possesses numerous beneficial properties, including its abilities in burn treatment and neuronal protection. DSIP entrapment in two macroporous polymer matrices based on copolymer of dimethylaminoethyl methacrylate and methylen-bis-acrylamide (Co-DMAEMA-MBAA) and copolymer of acrylic acid and methylen-bis-acrylamide (Co-AA-MBAA) has been studied. Quite 100% of DSIP has been entrapped into positively charged Co-DMAEMA-MBAA matrix, while the quantity of DSIP adsorbed on negatively charged Co-AA-MBAA was only 2–6%. DSIP release from Co-DMAEMA-MBAA was observed in saline solutions (0.9% NaCl and PBS) while there was no DSIP release in water or 25% ethanol, thus ionic strength was a reason of this process. - Graphical abstract: Delta-sleep inducing peptide possessing neuroprotective and wound healing properties was adsorbed on positively charged polymer matrix Co-DMAEMA-MBAA for tissue engineering. The peptide released from Co-DMAEMA-MBAA matrix in function of ionic strength of solution, pH decreasing stimulated peptide release from Co-DMAEMA-MBAA matrix for 3 h. This construction could be a base of new bioactive implants. - Highlights: • Macroporous positively charged Co-DMAEMA-MBAA matrix pore size was 20–35 μm. • DSIP was adsorbed on Co-DMAEMA-MBAA totally in 16 h. • Its release depends on ionic strength of solution (no release in 25% ethanol or water). • Co-DMAEMA-MBAA matrix swelling depends on pH and ionic strength of solution. • DSIP is destroyed in PBS and 0.9% NaCl in 5 days, but in water it was more stable.

  2. NMR imaging of fluid exchange between macropores and matrix in eogenetic karst

    Science.gov (United States)

    Florea, L.J.; Cunningham, K.J.; Altobelli, S.

    2009-01-01

    Sequential time-step images acquired using nuclear magnetic resonance (NMR) show the displacement of deuterated water (D2O) by fresh water within two limestone samples characterized by a porous and permeable limestone matrix of peloids and ooids. These samples were selected because they have a macropore system representative of some parts of the eogenetic karst limestone of the Biscayne Aquifer in southeastern Florida. The macroporosity, created by the trace fossil Ophiomorpha, is principally well connected and of centimeter scale. These macropores occur in broadly continuous stratiform zones that create preferential flow layers within the hydrogeologic units of the Biscayne. This arrangement of porosity is important because in coastal areas, it could produce a preferential pathway for salt water intrusion. Two experiments were conducted in which samples saturated with D2O were placed in acrylic chambers filled with fresh water and examined with NMR. Results reveal a substantial flux of fresh water into the matrix porosity with a simultaneous loss of D 2O. Specifically, we measured rates upward of 0.001 mL/h/g of sample in static conditions, and perhaps as great as 0.07 mL/h/g of sample when fresh water continuously flows past a sample at velocities less than those found within stressed areas of the Biscayne. These experiments illustrate how fresh water and D2O, with different chemical properties, migrate within one type of matrix porosity found in the Biscayne. Furthermore, these experiments are a comparative exercise in the displacement of sea water by fresh water in the matrix of a coastal, karst aquifer since D2O has a greater density than fresh water. ?? 2008 National Ground Water Association.

  3. Hierarchically oriented macroporous anode-supported solid oxide fuel cell with thin ceria electrolyte film.

    Science.gov (United States)

    Chen, Yu; Zhang, Yanxiang; Baker, Jeffrey; Majumdar, Prasun; Yang, Zhibin; Han, Minfang; Chen, Fanglin

    2014-04-09

    Application of anode-supported solid oxide fuel cell (SOFC) with ceria based electrolyte has often been limited by high cost of electrolyte film fabrication and high electrode polarization. In this study, dense Gd0.1Ce0.9O2 (GDC) thin film electrolytes have been fabricated on hierarchically oriented macroporous NiO-GDC anodes by a combination of freeze-drying tape-casting of the NiO-GDC anode, drop-coating GDC slurry on NiO-GDC anode, and co-firing the electrolyte/anode bilayers. Using 3D X-ray microscopy and subsequent analysis, it has been determined that the NiO-GDC anode substrates have a porosity of around 42% and channel size from around 10 μm at the electrolyte side to around 20 μm at the other side of the NiO-GDC (away from the electrolyte), indicating a hierarchically oriented macroporous NiO-GDC microstructure. Such NiO-GDC microstructure shows a tortuosity factor of ∼1.3 along the thickness direction, expecting to facilitate gas diffusion in the anode during fuel cell operation. SOFCs with such Ni-GDC anode, GDC film (30 μm) electrolyte, and La0.6Sr0.4Co0.2Fe0.8O3-GDC (LSCF-GDC) cathode show significantly enhanced cell power output of 1.021 W cm(-2) at 600 °C using H2 as fuel and ambient air as oxidant. Electrochemical Impedance Spectroscopy (EIS) analysis indicates a decrease in both activation and concentration polarizations. This study has demonstrated that freeze-drying tape-casting is a very promising approach to fabricate hierarchically oriented porous substrate for SOFC and other applications.

  4. Rhombohedral iron trifluoride with a hierarchized macroporous/mesoporous texture from gaseous fluorination of iron disilicide

    Energy Technology Data Exchange (ETDEWEB)

    Guérin, Katia, E-mail: katia.araujo_da_silva@univ-bpclermont.fr [Université Clermont Auvergne, Université Blaise Pascal, Institut de Chimie de Clermont-Ferrand, BP 10448, F-63000 Clermont-Ferrand (France); CNRS, UMR 6296, ICCF, F-63171 Aubière (France); Delbègue, Diane; Louvain, Nicolas; Doubtsof, Léa; Hamwi, André [Université Clermont Auvergne, Université Blaise Pascal, Institut de Chimie de Clermont-Ferrand, BP 10448, F-63000 Clermont-Ferrand (France); CNRS, UMR 6296, ICCF, F-63171 Aubière (France); Laik, Barbara; Pereira-Ramos, Jean-Pierre [Université Paris Est Créteil, Institut de Chimie et des Matériaux Paris-Est, UMR CNRS 7182, Thiais (France); Tahar-sougrati, Moulay; Jumas, Jean-Claude [Université Montpellier II, Institut Charles Gerhardt de Montpellier, UMR CNRS 5253, Montpellier (France); Willmann, Patrick; Cénac-Morthe, Céline [Centre National d' Etudes Spatiales, Toulouse (France)

    2016-04-15

    Stable low temperature rhombohedral iron trifluoride has been obtained by the fluorination under the pure fluorine gas of iron disilicide. The combination of both unusual fluorination process and precursor avoids to get unhydrated crystalline FeF{sub 3} particles and allows the formation of hierarchized channels of mesoporous/macroporous texture favorable for lithium diffusion. The fluorination mechanism proceeds by temperature steps from the formation, for a fluorination temperature below 200 °C, of an amorphous phase and an intermediate iron difluoride identified mainly by {sup 57}Fe Mössbauer spectroscopy before getting, as soon as a fluorination temperature of 260 °C is reached, the rhombohedral FeF{sub 3}. Both amorphous and crystallized samples display good ability for electrochemical process when used as cathode in lithium-ion battery. The low diameter of rhombohedral structure channels is balanced by an appropriate mesoporous texture and a capacity of 225 mAh.g{sup −1} after 5 cycles for a discharge cut-off of 2.5 V vs. Li{sup +}/Li at a current density of C/20 has been obtained and stabilized at 95 mAh.g{sup −1} after 116 cycles. - Highlights: • We investigated the synthesis of rhombohedral FeF{sub 3} by solid–gas reaction from iron disilicide. • We demonstrated that depending on the fluorination temperature various phases are stabilized. • We got a hierarchized macroporous/mesoporous texture. • We studied the electrochemical performances of amorphous and crystallized FeF{sub 3}. • Crystallized FeF{sub 3} presents a high faradic yield at first cycle focusing on insertion process.

  5. Silicon microtubes made by immersing macroporous silicon into ammonium fluoride solution

    Energy Technology Data Exchange (ETDEWEB)

    Huanca, Danilo Roque, E-mail: droqueh@usp.br [Laboratorio de sensores e Dispositivos do Instituto de Física e Química da Universidade Federal de Itajubá, Avenida BPS, 1303, CEP 37500 903 Itajubá, MG (Brazil); Laboratório de Microeletrônica da Escola Politécnica da USP, Avenida Prof. Luciano Gualberto, travessa 3 n° 380, CEP 05508-900 São Paulo, SP (Brazil); Kim, Hae Yong [Laboratório de Processamento de Sinais da Escola Politécnica da USP, Avenida Prof. Luciano Gualberto, travessa 3 n° 380, CEP 05508-900 São Paulo, SP (Brazil); Salcedo, Walter Jaimes [Laboratório de Microeletrônica da Escola Politécnica da USP, Avenida Prof. Luciano Gualberto, travessa 3 n° 380, CEP 05508-900 São Paulo, SP (Brazil)

    2015-06-15

    In this paper, we report the fabrication of silicon microtubes (SMT) by electrochemical dissolution of macroporous silicon layers immersed into aqueous solution of NH{sub 4}F mixed with Na{sub 2}SO{sub 4}, at different pH levels (4.5–9.5). Well-defined SMT have been obtained at pH 6.5, 7.5 and 9.5, whereas for other pH levels, the surface of the porous structure becomes passivated or formation of needle-like structure occurs. The mean inner diameter and the thickness of walls of the tubes shown to be depended on the pH level of the solutions. In this investigation, we obtained silicon tubes with inner diameter from 0.2 to 2.0 μm with thickness wall from about 0.23 to 0.50 μm. The investigation of these structures indicates that for tube formation the pH level and predominance of the anisotropic dissolution are necessary conditions. The tube formation cannot be explained regarding the silicon dissolution mechanism. For this aim, the role of the space charge region must be regarded. The structural characterization of silicon tubes was achieved by X-ray diffraction (XRD), X-ray energy dispersive Spectroscopy (EDS) and Raman spectroscopy and the results pointed out that these tubes are constituted by crystalline silicon structures covered by a very thin silicon oxide film. In this paper, the formation mechanism of the SMT is also discussed, highlighting the role of the space charge region (SCR) and the pH level for tube formation. - Highlights: • We fabricate silicon microtubes using macroporous silicon as a starting material. • Depending on the pH level, well-defined tubes are formed or the surface is passivate. • It was identified that the key factors for tube formation are the pH level and the space charge region.

  6. Distribution threshold values of CaCl2 onto the 10X-zeolite and macro-pore silica gel

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The calcium chloride used for adsorption separation of ammonia is promising for its large adsorptive capacity and lower desorption temperature,but difficult to develop because of the liable expansion,lump and chip in the adsorption/desorption process.Composite adsorbents made by monolayer dis-persion of calcium chloride onto carriers with high surface areas exhibit better adsorptive capacity and stability.Several models were developed to confirm the maximum monolayer dispersion capacity of calcium chloride onto the carriers(the distribution threshold value),and the closely packed monolayer dispersion model was considered the most suitable for this study.The distribution threshold values given by this model were 0.60 g CaCl2/(g 10X-zeolite) and 0.38 g CaCl2/(g SiO2).When the divalent salt was dispersed onto the carriers,however,anions were separated into two types,causing that the en-tropy of the system tended to increase and the system was not stable.To minimize the entropy,a new model was put forward as the modified closely packed monolayer dispersion model.Based on this model,the distribution threshold values are 0.52 g CaCl2/(g 10X-zeolite) and 0.33 g CaCl2/(g SiO2),re-spectively.The distribution threshold values were also gained experimentally by XRD quantitative phase analysis:0.61 g CaCl2/(g 10X-zeolite) and 0.31 g CaCl2/(g SiO2).Comparison between experi-mental values of distribution threshold with theoretical ones based on two different model showed that the closely packed monolayer dispersion model fits the monolayer dispersion of calcium chloride onto micro-pore carrier - 10X-zeolite,and the modified closely packed monolayer dispersion model is more suitable for the bigger aperture carrier - macro-pore silica gel.

  7. Wannier-Stark electro-optical effect, quasi-guided and photonic modes in 2D macroporous silicon structures with SiO2 coatings

    Science.gov (United States)

    Karachevtseva, L.; Goltviansky, Yu.; Sapelnikova, O.; Lytvynenko, O.; Stronska, O.; Bo, Wang; Kartel, M.

    2016-12-01

    Opportunities to enhance the properties of structured surfaces were demonstrated on 2D macroporous silicon structures with SiO2 coatings. We investigated the IR light absorption oscillations in macroporous silicon structures with SiO2 coatings 0-800 nm thick. The Wannier-Stark electro-optical effect due to strong electric field on Si-SiO2boundary and an additional electric field of quasi-guided optical modes were taken into account. The photonic modes and band gaps were also considered as peculiarities in absorbance spectra of macroporous silicon structures with a thick SiO2 coating. The photonic modes do not coincide with the quasi-guided modes in the silicon matrix and do not appear in absorption spectra of 2D macroporous silicon structures with surface nanocrystals.

  8. Purification of Houttuynia cordata Thunb. Essential Oil Using Macroporous Resin Followed by Microemulsion Encapsulation to Improve Its Safety and Antiviral Activity

    National Research Council Canada - National Science Library

    Pang, Jianmei; Dong, Wujun; Li, Yuhuan; Xia, Xuejun; Liu, Zhihua; Hao, Huazhen; Jiang, Lingmin; Liu, Yuling

    2017-01-01

    .... Herein, we proposed a strategy to prepare H. cordata essential oil (HEO) safely and effectively by combining the solvent extraction and the macroporous resin purification flexibly, and then encapsulating it using microemulsion...

  9. Arsenic adsorption by iron-aluminium hydroxide coated onto macroporous supports: Insights from X-ray absorption spectroscopy and comparison with granular ferric hydroxides.

    Science.gov (United States)

    Suresh Kumar, Prashanth; Flores, Roxana Quiroga; Sjöstedt, Carin; Önnby, Linda

    2016-01-25

    This paper evaluates the arsenic adsorption characteristics of a macroporous polymer coated with coprecipitated iron-aluminium hydroxides (MHCMP). The MHCMP adsorbent-composite fits best with a pseudo-second order model for As(III) and a pseudo-first order kinetic model for As(V). The MHCMP shows a maximum adsorption capacity of 82.3 and 49.6 mg As/g adsorbent for As(III) and As(V) ions respectively, and adsorption followed the Langmuir model. Extended X-ray absorption fine structure showed that binding of As(III) ions were confirmed to take place on the iron hydroxides coated on the MHCMP, whereas for As(V) ions the binding specificity could not be attributed to one particular metal hydroxide. As(III) formed a bidentate mononuclear complex with Fe sites, whereas As(V) indicated on a bidentate binuclear complex with Al sites or monodentate with Fe sites on the adsorbent. The column experiments were run in a well water spiked with a low concentration of As(III) (100 μg/L) and a commercially available adsorbent (GEH(®)102) based on granular iron-hydroxide was used for comparison. It was found that the MHCMP was able to treat 7 times more volume of well water as compared to GEH(®)102, maintaining the threshold concentration of less than 10 μg As/L, indicating that the MHCMP is a superior adsorbent.

  10. Important property of polymer spheres for the preparation of three-dimensionally ordered macroporous (3DOM) metal oxides by the ethylene glycol method: the glass-transition temperature.

    Science.gov (United States)

    Sadakane, Masahiro; Sasaki, Keisuke; Nakamura, Hiroki; Yamamoto, Takashi; Ninomiya, Wataru; Ueda, Wataru

    2012-12-21

    We demonstrate that the glass-transition temperature (T(g)) of a polymer sphere template is a crucial factor in the production of three-dimensionally ordered macroporous (3DOM) materials. Metal nitrate dissolved in ethylene glycol-methanol was infiltrated into the void of a face-centered, close-packed colloidal crystal of poly(methyl methacrylate) (PMMA)-based spheres. The metal nitrate reacts with EG to form a metal oxalate (or metal glycoxylate) solid (nitrate oxidation) in the void of the template when the metal nitrate-EG-PMMA composite is heated. Further heating converts metal oxalate to metal oxide and removes PMMA to form 3DOM materials. We investigated the effect of T(g) of PMMA templates and obtained clear evidence that the solidification temperature of the metal precursor solution (i.e., nitration oxidation temperature) should be lower than the T(g) of the polymer spheres to obtain a well-ordered 3DOM structure.

  11. Study on separation of platinum group metals from high level liquid waste using macroporous (MOTDGA-TOA)/SiO{sub 2}-P silica-based absorbent

    Energy Technology Data Exchange (ETDEWEB)

    Ito, Tatsuya [Department of Quantum Science and Energy Engineering, Graduate School of Engineering, Tohoku University, Aoba 6-6, Aramaki, Aoba-ku, Sendai, Miyagi 980-8579 (Japan); Japan Atomic Energy Agency, Tokai-mura Naka-gun, Ibarak319-1195 (Japan); Kim, Seong-Yun; Xu, Yuanlai; Hitomi, Keitaro [Cyclotron and Radioisotope Center, Tohoku University, Aoba 6-3, Aramaki, Aoba-ku, Sendai, Miyagi 980-8578 (Japan); Ishii, Keizo [Department of Quantum Science and Energy Engineering, Graduate School of Engineering, Tohoku University, Aoba 6-6, Aramaki, Aoba-ku, Sendai, Miyagi 980-8579 (Japan); Nagaishi, Ryuji; Kimura, Takaumi [Japan Atomic Energy Agency, Tokai-mura Naka-gun, Ibarak319-1195 (Japan)

    2013-07-01

    The recovery of platinum group metals (PGMs) from high level liquid waste (HLLW) by macroporous silica-based adsorbent, (MOTDGA-TOA)/SiO{sub 2}-P has been developed by impregnating two extractants of N,N'-dimethyl-N,N'-di-n-octyl-thio-diglycolamide (MOTDGA) and tri-n-octylamine (TOA) into a silica/polymer composite support (SiO{sub 2}-P). The adsorption of Ru(III), Rh(III) and Pd(II) have been investigated in simulated HLLW by batch method. The adsorbent has shown good uptake property for Pd(II). In addition, the combined use of MOTDGA and TOA improved the adsorption of Ru(III) and Rh(III) better than the individual use of them. The usability of adsorbent in radiation fields was further confirmed by irradiation experiments. The adsorbent remained to have the uptake capability for PGMs over the absorbed dose of 100 kGy, corresponding with one really adsorbed by the adsorbent, and showed good retention capability for Pd(II) even at the absorbed dose of 800 kGy. The chromatographic separation of metal ions was demonstrated with the adsorbent packed column, there is no influence of Re(VII) (instead of Tc) on the excellent separation behavior of Pd(II). (authors)

  12. Enrichment and Purification of Alkaloids from Aconitum carmichaelii with D101 Macroporous Resin%D101型大孔树脂纯化附子生物碱

    Institute of Scientific and Technical Information of China (English)

    彭拓华; 张少俊; 钟世顺; 杨毅达; 杨彤

    2012-01-01

    Objective; To resarch chemical composition change after enrichment and purification of alkaloids from Aconitum carmichaelii with D101 macroporous resin. Method: Taking transfer rate of total alkaloids, diester diterpenoid alkaloids, aconitine, hypaconitine and mesaconitine as indexes, before and after purification, the content of alkaloids from extracts of A. carmichaelii was determined by UV and HPLC, ingredients of alkaloids differentiated by TLC. Result; Alkaloids from A. carmichaelii was enriched by D101 macroporous resin, transfer rate and purity of total alkaloids were 83. 70% , 67. 34% , respectively; Transfer rate of aconitine, hypaconitine and mesaconitine were 77.78% , 94. 12% , 52.63% ; It showed 6 similar biological spots by TLC comparison, this indicated that there was no significant difference before and after enrichment of alkaloids composition. Conclusion; D101 type macroporous resin could effectively enhance purity of total alkaloids from A. carmichaelii with high transfer rate of alkaloids, it could be used for production promotion.%目的:研究附子生物碱经D101型大孔树脂富集后化学成分的变化.方法:以附子中总生物碱、酯型生物碱、乌头碱、次乌头碱及新乌头碱的转移率为指标,采用UV,HPLC,TLC分别对富集前后附子提取物中的生物碱进行含量测定及其成分鉴别.结果:采用D101型大孔树脂富集附子生物碱,总生物碱转移率83.70%,纯度67.34%;乌头碱转移率77.78%,次乌头碱转移率94.12%,新乌头碱转移率52.63%;TLC比较发现显示6个相似的生物斑点,说明富集前后生物碱化学成分无明显差异.结论:D101型大孔树脂能有效提高附子中总生物碱的纯度,且各生物碱转移率较高,可用于大生产推广.

  13. Separation of matrine and oxymatrine from Sophora flavescens extract through cation exchange resin coupled with macroporous absorption resin

    Directory of Open Access Journals (Sweden)

    Chen Haohao

    2016-06-01

    Full Text Available A simple method for separation of matrine and oxymatrine from Sophora flavescens was developed with cation exchange resin coupled with macroporous resin. Based on the adsorption characteristics of matrine and oxymatrine, 001×732 cation exchange resin was used to absorb target alkaloids for removing most of the foreign matter, while BS-65 macroporous resin was chosen to purify these alkaloids. The result showed that the equilibrium adsorption data of matrine and oxymatrine on 001×732 resin and BS-65 resin at 30°C was fitted to Langmuir isotherm and Freundlich isotherm, respectively. The contents of matrine and oxymatrine were increased from 0.73% and 2.2% in the crude extract of the root of Sophora flavescens to 67.2% and 66.8% in the final eluent products with the recoveries of 90.3% and 86.9%, respectively.

  14. Effects of CT Number-Derived Matrix Density on Preferential Flow and Transport in Macroporous Agricultural Soil

    DEFF Research Database (Denmark)

    Katuwal, Sheela; Møldrup, Per; Lamande, Mathieu André Maurice;

    2015-01-01

    permeability, saturated hydraulic conductivity, and solute transport. This was due to the limited CT scan resolution and large structural variability below this resolution. However, CTmatrix, a new parameter derived from the CT number of the matrix excluding stones and large mostly air-filled macropores...... risks to public health. This study focused on establishing links between the structural pore space and preferential transport using a combination of standard physical measurement methods for air and water permeabilities, breakthrough experiments, and X-ray computed tomography (CT) on large soil columns....... Substantial structural heterogeneity that resulted in significant variations in flow and tracer transport was observed, despite the textural similarity of the investigated samples. Quantification of macropore characteristics with X-ray CT was useful but not sufficient to explain the variability in air...

  15. Perspectives of treatment of anemias with cells of fetal liver, immobilized in macroporous alginate-gelatin carriers

    Directory of Open Access Journals (Sweden)

    Gritsay D.V.

    2014-06-01

    Full Text Available Aim of the work was to study possibility of erythropoiesis stimulation by transplantation of fetal liver cells, seeded into macro¬porous carriers to the rats with post-hemorrhargic anemia, induced by 70% hepatectomy. Fetal liver cells (FLC were isolated from fetuses of rats with 15 days’ gestation and were cryopreserved. Decryopreserved FLC were seeded into macroporous spongy alginate-gelatin scaffolds, which were covered by alginate capsule and implanted into omentum of rats with modeled liver insufficiency. It was shown that fetal liver cells, immobilized in macroporous scaffolds after implantation have positive effect on red blood count and hemoglobin content, indicating that this approach is promising for the development of new methods of anemia treatment.

  16. ADSORPTION DYNAMICS OF MACROPOROUS POLYMERIC ADSORBENT 1.The Studies on the Particle Diffusion Mass—Transfer Process

    Institute of Scientific and Technical Information of China (English)

    WANGChunhong; XUMingcheng; 等

    2000-01-01

    The adsorption dynamics for phenol in aqueous solution of the adsorbent based on polystyrene was studied.In order to distinguish with the Boyd quasi-homogeneous model of the inner structure of ion-exchanger,the particle diffusion model including surface diffustion model and porediffusion model was suggested which is suitable to the macroporous adsorbent.The diffusiondetermination step of the adsorption pocess was established and the effective diffusion coefficient was also determined.The influence of surface diffusion and pore difusion on the particle diffusion rate was investigated qualitatively.All of these were very important to improve the structure of the macroporous adsorbent in order to improve the mass-transfer rate.

  17. Prediction of biopore- and matrix-dominated flow from X-ray CT-derived macropore network characteristics

    DEFF Research Database (Denmark)

    Naveed, Muhammad; Møldrup, Per; Schaap, Marcel G

    2016-01-01

    at 􀀀30 and 􀀀100 cm matric potential, and gas diffusivity at 􀀀30 and 􀀀100 cm matric potential. Distribution maps for saturated hydraulic conductivity, air permeability, and gas diffusivity reflected no autocorrelation irrespective of soil texture and organic matter...... content. Existing empirical predictive models for saturated hydraulic conductivity and air permeability showed poor performance, as they were not able to realistically capture macropore flow. The tested empirical model for gas diffusivity predicted measurements at 􀀀100 cm matric potential...... interrelated. Most of the macropore network characteristics were also significantly correlated with saturated hydraulic conductivity, air permeability, and gas diffusivity. The predictive Ahuja et al. (1984) model for saturated hydraulic conductivity, air permeability, and gas diffusivity performed reasonably...

  18. Subnanomolar Detection Limit Application of Ion-Selective Electrodes with Three-Dimensionally Ordered Macroporous (3DOM) Carbon Solid Contacts

    OpenAIRE

    2009-01-01

    Solid-contact ion-selective electrodes (SC-ISEs) can exhibit very low detection limits and, in contrast to conventional ISEs, do not require an optimization of the inner filling solution. This work shows that subnanomolar detection limits can also be achieved with SC-ISEs with three-dimensionally ordered macroporous (3DOM) carbon contacts, which have been shown recently to exhibit excellent long-term stabilities and good resistance to the interferences from oxygen and light. The detection lim...

  19. Simple preparation of lotus-root shaped meso-/macroporous TiO₂ and their DSSC performances.

    Science.gov (United States)

    Hong, Jin-Yeon; Bae, Sang-Eun; Won, Yong Sun; Huh, Seong

    2015-06-15

    In pursuit of superior TiO2 photoanode materials for dye-sensitized solar cells (DSSCs), we prepared lotus-root shaped meso-/macroporous TiO2. The lotus-root shaped meso-/macroporous TiO2 was easily prepared by using a cetyltrimethylammonium hydroxide (CTAOH) template in aqueous solution. The crystallization of the as-prepared amorphous lotus-root shaped TiO2 was performed at 700 °C in air. Crystalline anatase phase with a very small portion of rutile phase was generated after the heat treatment at 700 °C and the BET surface area of crystalline lotus-root shaped meso-/macroporous TiO2 material (LR-700) was 30.0 m(2) g(-1). The wall of LR-700 displayed well-developed mesoporosity with a pore dimension of 28.3 nm. Periodically arranged microscale one-dimensional (1D) macropores were also observed in the particles. The photon-to-current conversion efficiencies (η) of LR-700 photoanodes in Grätzel type DSSCs were examined. The conversion efficiency of DSSC prepared by mixing nanoparticulate Evonik P25 and LR-700 (ratio=85:150 by mass) was 28% greater compared to the reference electrode using P25. Incident photon-to-current efficiencies (IPCE) of the DSSCs were dramatically improved by employing the photoanodes composed of a mixture of P25 and LR-700 but impedance analysis indicated that P25/LR-700 mixed cells have resistances similar to the standard P25 reference cell. Thus, photovoltaic performances could be improved mainly due to the increases of dye uptake and external quantum efficiency by using a mixed photoanode composed of LR-700 and nanocrystalline P25 particles.

  20. Evaluation of the in vitro degradation of macroporous hydrogels using gravimetry, confined compression testing, and microcomputed tomography.

    Science.gov (United States)

    Behravesh, Esfandiar; Timmer, Mark D; Lemoine, Jeremy J; Liebschner, Michael A K; Mikos, Antonios G

    2002-01-01

    This study investigated the in vitro degradation characteristics of macroporous hydrogels based on poly(propylene fumarate-co-ethylene glycol) (P(PF-co-EG)). Four formulations were fabricated to test the effect of porosity and cross-linking density on the degradation of the resulting macroporous hydrogels. Macroporosity was introduced by the addition of sodium bicarbonate and ascorbic acid, the precursors of the carbon dioxide porogen, in the initiation system for the hydrogel cross-linking. Macroporous hydrogels with porosities of 0.80 +/- 0.03 and 0.89 +/- 0.03 were synthesized by the addition of sodium bicarbonate of concentrations 40 and 80 mg/mL and ascorbic acid of concentrations 0.05 and 0.1 mol/L, respectively. Poly(ethylene glycol) diacrylate (PEG-DA) was utilized as a cross-linker. The molecular weight between cross-links had a significant effect on weight loss after 12 weeks, where samples with M(C) of 1,880 +/- 320 synthesized with a P(PF-co-EG):PEG-DA ratio of 3:1 had a significantly greater mass loss due to degradation than those with M(C) of 1,000 +/- 100 synthesized with a P(PF-co-EG):PEG-DA ratio of 1:1. In contrast, porosity played a minimal role in determining the weight loss. Mechanical testing of the hydrogels under confined compression showed a decrease in compressive modulus over the degradation time for all formulations. In addition, an increase in hydrogel equilibrium water content and pore wall thickness was observed with degradation time, whereas the hydrogel porosity and surface area density remained invariant. The results from microcomputed tomography corroborated with the rest of the measurements and indicated a bulk degradation mechanism of the macroporous hydrogels.

  1. In vitro and in vivo study to the biocompatibility and biodegradation of hydroxyapatite/poly(vinyl alcohol)/gelatin composite.

    NARCIS (Netherlands)

    Wang, M.; Li, Yubao; Wu, J.; Xu, F.; Zuo, Y.; Jansen, J.A.

    2008-01-01

    A novel porous composite material composed of hydroxyapatite, poly(vinyl alcohol) (PVA), and gelatin (Gel) was fabricated by emulsification. Scanning electron microscopy showed that the material had a well-interconnected porous structure including many macropores (100-500 microm) and micropores (les

  2. STUDY ON SYNTHESIS OF PVC SERIES OF MACROPOROUS SULFORIC RESINS AND THEIR APPLICATIONS IN CATALYTIC ESTERIFICATION AND WATER TREATMENT

    Institute of Scientific and Technical Information of China (English)

    LIYanfeng; FULiandi; 等

    1999-01-01

    The PVC serves of macroporous sulfonic cation-exchange resins were prepared by the sulfonation of a macroporous PVC bead with concentrated sulfonic acid or chlorosulfonic acid.the resulting sulfonic resin was employed in the investigation of catalytic esterification and solftening of water,The results show that the yields of esters reach 60.0-84.4% according as different fatty acids and alcohols,the refractive indexes of esters obtained resemble those reported in the references basically,meanwhile,345L softened water which holds ≤0.06mmol/L hardness would be prepared by 1 L wet sulfonic resin reusing for 4 times.The resulting sulfonic resins would have 1.6-2.0or 2.5-3.0mmol/g exchange capacity by using concentrated sulfonic acid or chlorosulfonic acid as sulfonating agent,respectively,The sulfonic resin has a macroporous structure taking the morphology with agglomerates of minutely spherical gel particles as characteristic.

  3. Study on Separation of Lanthanum from Praseodymium Complexes with IMDA by Gel and Macroporous Anion-Exchangers

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    During our studies on separation of rare earth complexes with aminopolycarboxylic acids on anion-exchangers, it is found that the affinity series of these elements with IMDA (Ln3+:IMDA=1:2) for the anion-exchanger Dowex 1 in the acetate and IMDA forms is non-typical: Dy3+> Ho3+> Gd3+>Eu3+>Er3+>Y3+>Sm3+>Tm3+>Nd3+>Pr3+>>La3+. In the affinity series La3+ is characterised as the lowest affinity in omparison with other rare earth elements, which indicates possibility ofpurification of La3+ from all remaining lanthanides as well as Pr3+ in the macro-micro systems by the frontal analysis technique. In the investigations strongly basic gel anion-exchangers Dowex 1×8 (type 1) and Dowex 2×8 (type 2) and strongly basic and weakly basic macroporous anion-exchangers Dowex MSA-1 and Dowex MWA-1 were used. Macroporous ion-exchangers have a sponge-like matrix which contains pores larger than molecules in size and the exchange of large ions is faster. The studies indicate that both the gel and macroporous anion-exchangers are useful for purification of La3+ from Pr3+ complexes with iminodiacetic acid.

  4. Optimization of macropore evolution towards high photocatalytic activity enhancement in meso/macro porous Anatase TiO2

    Science.gov (United States)

    Nair, Radhika V.; Gayathri, P. K.; Siva Gummaluri, Venkata; Vijayan, C.

    2017-01-01

    We report on an optimization strategy for macro pore evolution leading to the design of highly photocatalytic 3D hierarchical meso/macroporous TiO2 via much simpler, faster and cost effective synthesis scheme. Meso/macro porous TiO2 is an excellent candidate material for photocatalytic applications owing to the availability of internal surfaces as active sites for redox reactions. The current research scenario focuses on the design of highly efficient photocatalytic systems as well as rapid, facile and cost effective methods of synthesis and optimization of parameters. The present report is on the gradual evolution of macropores in anatase TiO2 by the effective control of pH of the solvent, reaction time, temperature, solvent ratio and reactant concentration via a facile hydrothermal method in this regard. 3D hierarchical macroporous structures are obtained at pH 7 within a comparatively short reaction time of 5 h and demonstrated to be highly photocatalytic (with rate constant four times that of P25 nanoparticles) through photodegradation of Rhodamine B dye.

  5. A simple method for preparation of macroporous polydimethylsiloxane membrane for microfluidic chip-based isoelectric focusing applications

    Energy Technology Data Exchange (ETDEWEB)

    Ou Junjie [Department of Mechanical and Mechatronics Engineering, University of Waterloo, 200 University Ave West, Waterloo, Ontario, N2L 3G1 (Canada); Department of Chemistry, University of Waterloo, 200 University Ave West, Waterloo, Ontario, N2L 3G1 (Canada); Ren, Carolyn L., E-mail: c3ren@mecheng1.uwaterloo.ca [Department of Mechanical and Mechatronics Engineering, University of Waterloo, 200 University Ave West, Waterloo, Ontario, N2L 3G1 (Canada); Pawliszyn, Janusz [Department of Chemistry, University of Waterloo, 200 University Ave West, Waterloo, Ontario, N2L 3G1 (Canada)

    2010-03-10

    A new, simple method was reported to prepare PDMS membranes with micrometer size pores for microfluidic chip applications. The pores were formed by adding polystyrene and toluene into PDMS prepolymer solution prior to spin-coating and curing. The resulting PDMS membrane has a thickness of around 10 {mu}m and macropores with a diameter ranging from 1 to 2 {mu}m measured using scanning electron microscope (SEM) imaging. This PDMS membrane was validated by integrating it with PDMS microfluidic chips for protein separation using isoelectric focusing mechanism coupled with whole channel imaging detection (IEF-WCID). It has been shown that five standard pI markers and a mixture of two proteins, myoglobin and {beta}-lactoglobulin, can be separated using these chips. The results indicated that this macroporous PDMS membrane can replace the dialysis membrane in PDMS chips for the IEF-WCID technique. The preparation method of macroporous PDMS membrane may be potentially applied in other fields of microfluidic chips.

  6. Macroporous biohybrid cryogels for co-housing pancreatic islets with mesenchymal stromal cells.

    Science.gov (United States)

    Borg, Danielle J; Welzel, Petra B; Grimmer, Milauscha; Friedrichs, Jens; Weigelt, Marc; Wilhelm, Carmen; Prewitz, Marina; Stißel, Aline; Hommel, Angela; Kurth, Thomas; Freudenberg, Uwe; Bonifacio, Ezio; Werner, Carsten

    2016-10-15

    Intrahepatic transplantation of allogeneic pancreatic islets offers a promising therapy for type 1 diabetes. However, long-term insulin independency is often not achieved due to severe islet loss shortly after transplantation. To improve islet survival and function, extrahepatic biomaterial-assisted transplantation of pancreatic islets to alternative sites has been suggested. Herein, we present macroporous, star-shaped poly(ethylene glycol) (starPEG)-heparin cryogel scaffolds, covalently modified with adhesion peptides, for the housing of pancreatic islets in three-dimensional (3D) co-culture with adherent mesenchymal stromal cells (MSC) as accessory cells. The implantable biohybrid scaffolds provide efficient transport properties, mechanical protection, and a supportive extracellular environment as a desirable niche for the islets. MSC colonized the cryogel scaffolds and produced extracellular matrix proteins that are important components of the natural islet microenvironment known to facilitate matrix-cell interactions and to prevent cellular stress. Islets survived the seeding procedure into the cryogel scaffolds and secreted insulin after glucose stimulation in vitro. In a rodent model, intact islets and MSC could be visualized within the scaffolds seven days after subcutaneous transplantation. Overall, this demonstrates the potential of customized macroporous starPEG-heparin cryogel scaffolds in combination with MSC to serve as a multifunctional islet supportive carrier for transplantation applications. Diabetes results in the insufficient production of insulin by the pancreatic β-cells in the islets of Langerhans. Transplantation of pancreatic islets offers valuable options for treating the disease; however, many transplanted islets often do not survive the transplantation or die shortly thereafter. Co-transplanted, supporting cells and biomaterials can be instrumental for improving islet survival, function and protection from the immune system. In the

  7. Blooming gelatin: an individual additive for enhancing nanoapatite precipitation, physical properties, and osteoblastic responses of nanostructured macroporous calcium phosphate bone cements.

    Science.gov (United States)

    Orshesh, Ziba; Hesaraki, Saeed; Khanlarkhani, Ali

    2017-01-01

    In recent years, there has been a great interest in using natural polymers in the composition of calcium phosphate bone cements to enhance their physical, mechanical, and biological performance. Gelatin is a partially hydrolyzed form of collagen, a natural component of bone matrix. In this study, the effect of blooming gelatin on the nanohydroxyapatite precipitation, physical and mechanical properties, and cellular responses of a calcium phosphate bone cement (CPC) was investigated. Various concentrations of blooming gelatin (2, 5, and 8 wt.%) were used as the cement liquid and an equimolar mixture of tetracalcium phosphate and dicalcium phosphate was used as solid phase. The CPC without any gelatin additive was also evaluated as a control group. The results showed that gelatin accelerated hydraulic reactions of the cement paste, in which the reactants were immediately converted into nanostructured apatite precipitates after hardening. Gelatin molecules induced 4%-10% macropores (10-300 μm) into the cement structure, decreased initial setting time by ~190%, and improved mechanical strength of the as-set cement. Variation in the above-mentioned properties was influenced by the gelatin concentration and progressed with increasing the gelatin content. The numbers of the G-292 osteoblastic cells on gelatin-containing CPCs were higher than the control group at entire culture times (1-14 days), meanwhile better alkaline phosphatase (ALP) activity was determined using blooming gelatin additive. The observation of cell morphologies on the cement surfaces revealed an appropriate cell attachment with extended cell membranes on the cements. Overall, adding gelatin to the composition of CPC improved the handling characteristics such as setting time and mechanical properties, enhanced nanoapatite precipitation, and augmented the early cell proliferation rate and ALP activity.

  8. Visible light photocatalysis via 3D-ordered macroporous TiO2 films sensitized with CdS quantum dots.

    Science.gov (United States)

    Xie, Hao; Zeng, Tao; Jin, Shaofen; Li, Yuanzhi; Wang, Xuelai; Sui, Xiaotao; Zhao, Xiujian

    2013-02-01

    CdS quantum dots (QDs)-sensitized TiO2 film with three-dimensionally (3D) ordered macropores was synthesized via a two-step method on ITO glass substrate. 3D-ordered macroporous TiO2 film was firstly fabricated on an ITO glass via layer-by-layer deposition and hydrolysis of tetrabutyl titanate using 3D-ordered latex film as organic template, followed by calcination at 450 degrees C for 2 h to remove the template. Then, the CdS QDs were deposited on the 3D-ordered macroporous TiO2 film by successive ionic layer adsorption and reaction technique. The as-prepared CdS-sensitized TiO2 film was characterized with X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, diffusive reflectance UV-visible absorption spectra, and photoelectrochemical measurements. Its photocatalytic activity was evaluated by the photocatalytic degradation of crystal violet aqueous solution at ambient temperature. It was revealed in our results that the CdS QDs-sensitized 3D-ordered macroporous TiO2 film exhibits enhanced photocatalytic activity for the photodegradation of crystal violet than that of the CdS-free 3D-ordered macroporous TiO2 film and that of CdS QD-sensitized TiO2 film without 3D-ordered macropores under the irradiation of visible light due to the co-existence of 3D-ordered interconnected macropores and the sensitization of CdS QDs.

  9. Silicon nanowires made via macropore etching for superior Li ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Ossei-Wusu, Emmanuel; Cojocaru, Ala; Hartz, Hauke; Carstensen, Juergen; Foell, Helmut [Institute for Materials Science, Christian-Albrechts-University of Kiel, Kaiserstrasse 2, 24143 Kiel (Germany)

    2011-06-15

    The future of electro mobility depends critically on substantially improved Li ion batteries. Si as anode material has a more than tenfold higher capacity as compared to the standard graphite anode, but needs to be nanostructured to avoid fracture. It is shown that macropore etching combined with suitable follow-up processes allows to produce nanowire arrays with optimized geometries. First tests of these anodes showed very promising results with respect to prime battery parameters like capacity and capacity losses during cycling. In particular, a first test battery showed superior performance for more than 60 cycles in comparison to an otherwise identical battery with a graphite anode. Critical processes like galvanic Cu deposition at the nanowire bottom can be avoided by using an optimized pore etching process that produces complex pore diameter profiles as a function of depth, allowing easy separation of the nanowire layer from the Si substrate and processing the nanowire surface area. In total, the production of Si nanowire anodes using this improved process should allow mass production at competitive costs. Si nanowire array for use as a high-capacity anode in a Li ion battery. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  10. Absorption and desorption behaviour of the flavonoids from Glycyrrhiza glabra L. leaf on macroporous adsorption resins.

    Science.gov (United States)

    Dong, Yi; Zhao, Mouming; Sun-Waterhouse, Dongxiao; Zhuang, Mingzhu; Chen, Huiping; Feng, Mengying; Lin, Lianzhu

    2015-02-01

    The kinetics of adsorption and desorption behaviours of five macroporous resins for enriching flavonoids from Glycyrrhizaglabra L. leaf were investigated. All five resins showed similar and effective adsorption and desorption properties. A pseudo-second-order kinetics model was suitable for evaluating the whole adsorption process. Additionally, two representative resins (XAD-16 and SP825) were chosen for adsorption thermodynamics study. The adsorption of the representative resins was an exothermic and physical adsorption process. Further column chromatography of XAD-16 and SP825 showed that the total flavonoids (from 16.8% to 55.6% by XAD-16 and to 53.9% by SP825) and pinocembrin (from 5.49% to 15.2% by XAD-16 and to 19.8% by SP825) were enriched in 90% ethanol fractions. Meanwhile, the antioxidant capacities and nitrite-scavenging capacities were 2-3times higher than those of the crude extract. The fractions with high flavonoid and pinocembrin contents could be used as biologically active ingredients in functional food.

  11. Macroporous mesh of nanoporous gold in electrochemical monitoring of superoxide release from skeletal muscle cells.

    Science.gov (United States)

    Banan Sadeghian, Ramin; Han, Jiuhui; Ostrovidov, Serge; Salehi, Sahar; Bahraminejad, Behzad; Ahadian, Samad; Chen, Mingwei; Khademhosseini, Ali

    2017-02-15

    Real-time monitoring of metabolically relevant biochemicals released in minuscule amounts is of utmost diagnostic importance. Superoxide anion as a primary member of reactive oxygen species, has physiological and pathological effects that depend on its concentration and release rate. Here we present fabrication and successfully testing of a highly sensitive electrochemical biosensor featuring a three-dimensional macroporous mesh of nanoporous gold tailored to measure the dynamics of extracellular superoxide concentration. Wide and accessible surface of the mesh combined with high porosity of the thin nanoporous gold coating enables capturing the analyte in pico- to nano-molar ranges. The mesh is functionalized with cytochrome-c (cyt-c) and incorporated as a working electrode to measure the release rate of drug-induced superoxides from C2C12 cells through a porous membrane. The device displays a considerably improved superoxide sensitivity of 7.29nAnM(-)(1)cm(-)(2) and a low level of detection of 70pM. Such sensitivity is orders of magnitude higher than any similar enzyme-based electrochemical superoxide sensor and is attributed to the facile diffusion of the analyte through the well-spread nanofeatured gold skin. Superoxide generation rates captured from monolayer myoblast cultures containing about 4×10(4) cells, varied from 1.0 to 9.0nMmin(-)(1) in a quasi-linear fashion as a function of drug concentration. This work provides a platform for the development of highly sensitive molecular electrochemical biosensors.

  12. Using oxygen-18 to study DOC transport in a macroporous forest soil

    Science.gov (United States)

    Dusek, Jaromir; Vogel, Tomas; Dohnal, Michal; Barth, Johannes A. C.; Sanda, Martin; Marx, Anne; Jankovec, Jakub

    2017-04-01

    Quantitative prediction of water movement and fluxes of dissolved substances such as organic carbon at both the hillslope and the catchment scales remains a challenge due to complex boundary conditions and soil spatial heterogeneity. In this study, water molecule 18O/16O ratios (expressed as δ18O) and dissolved organic carbon (DOC) concentrations in stormflow were analyzed using a physically-based modeling approach. A one-dimensional dual-continuum vertical flow and transport model was used to simulate the subsurface transport processes in a macroporous forest hillslope soil over a period of 2.5 years. The 18O isotope was used as a conservative natural tracer to contrast the behavior of DOC that undergoes complex transformations in the soil environment. The model was applied to describe the transformation of input signals of δ18O and DOC into output signals observed in the hillslope stormflow. To quantify uncertainty associated with the model parameterization, Monte Carlo analysis in conjunction with Latin hypercube sampling was performed. δ18O variations in hillslope discharge and in soil pore water were predicted reasonably well. Despite the complex nature of microbial transformations that caused uncertainty in model parameters and subsequent prediction of DOC transport, the simulated temporal patterns of DOC concentration in stormflow showed similar behavior to that reflected in the observed DOC fluxes. Due to preferential flow, the contribution of the hillslope DOC export was higher than the amounts that are usually found in the available literature.

  13. Preparation of Macroporous Epitaxial Quartz Films on Silicon by Chemical Solution Deposition.

    Science.gov (United States)

    Carretero-Genevrier, Adrián; Gich, Martí

    2015-12-21

    This work describes the detailed protocol for preparing piezoelectric macroporous epitaxial quartz films on silicon(100) substrates. This is a three-step process based on the preparation of a sol in a one-pot synthesis which is followed by the deposition of a gel film on Si(100) substrates by evaporation induced self-assembly using the dip-coating technique and ends with a thermal treatment of the material to induce the gel crystallization and the growth of the quartz film. The formation of a silica gel is based on the reaction of a tetraethyl orthosilicate and water, catalyzed by HCl, in ethanol. However, the solution contains two additional components that are essential for preparing mesoporous epitaxial quartz films from these silica gels dip-coated on Si. Alkaline earth ions, like Sr(2+) act as glass melting agents that facilitate the crystallization of silica and in combination with cetyl trimethylammonium bromide (CTAB) amphiphilic template form a phase separation responsible of the macroporosity of the films. The good matching between the quartz and silicon cell parameters is also essential in the stabilization of quartz over other SiO2 polymorphs and is at the origin of the epitaxial growth.

  14. Three-dimensionally Ordered Macroporous Structure Enabled Nanothermite Membrane of Mn2O3/Al

    Science.gov (United States)

    Zheng, Guoqiang; Zhang, Wenchao; Shen, Ruiqi; Ye, Jiahai; Qin, Zhichun; Chao, Yimin

    2016-03-01

    Mn2O3 has been selected to realize nanothermite membrane for the first time in the literature. Mn2O3/Al nanothermite has been synthesized by magnetron sputtering a layer of Al film onto three-dimensionally ordered macroporous (3DOM) Mn2O3 skeleton. The energy release is significantly enhanced owing to the unusual 3DOM structure, which ensures Al and Mn2O3 to integrate compactly in nanoscale and greatly increase effective contact area. The morphology and DSC curve of the nanothermite membrane have been investigated at various aluminizing times. At the optimized aluminizing time of 30 min, energy release reaches a maximum of 2.09 kJ•g-1, where the Al layer thickness plays a decisive role in the total energy release. This method possesses advantages of high compatibility with MEMS and can be applied to other nanothermite systems easily, which will make great contribution to little-known nanothermite research.

  15. Adsorption Behaviors and Mechanism of Macroporous Phosphonic Acid Resin for Gadolinium

    Institute of Scientific and Technical Information of China (English)

    吴香梅; 熊春华; 姚彩萍

    2004-01-01

    The adsorption behaviors and mechanism of a novel chelate resin, macroporous phosphonic acid resin(PAR)for Gd(Ⅲ)were investigated. The statically and dynamically saturated adsorption capacity is respectively 308 mg·g-1resin and 296 mg·g-1resin at 298 K in Hac-NaAc medium at pH 5.6. Gd(Ⅲ)adsorbed on PAR can be reductively eluted by 0.5~5.0 mol·L-1 HCl used as eluant and the elution percentage is up to 94.7% in 1.0 mol·L-1 HCl. The resin can be regenerated and reused without apparent decrease in adsorption capacity. The apparent adsorption rate constant is k298=3.96×10-5 s-1. The adsorption behavior of PAR for Gd(Ⅲ) conforms to the Freundlich isotherm. The thermodynamic adsorption parameter, enthalpy change △H of PAR for Gd(Ⅲ)is 22.6kJ·mol-1. The apparent adsorption activation energy(Ea)of PAR for Gd(Ⅲ)is 5.0 kJ·mol-1. The molar coordination ratio of the functional group of PAR to Gd(Ⅲ)is about 3∶1. The adsorption mechanism of PAR for Gd(Ⅲ)was examined by using chemical method and IR spectrometry.

  16. Isolation of α-arbutin from Xanthomonas CGMCC 1243 fermentation broth by macroporous resin adsorption chromatography.

    Science.gov (United States)

    Liu, Chunqiao; Zhang, Peng; Liu, Luo; Xu, Tao; Tan, Tianwei; Wang, Fang; Deng, Li

    2013-04-15

    α-Arbutin is a glycosylated hydroquinone which has inhibitory function against tyrosinase. In this work, a one-step isolation of α-arbutin from Xanthomonas CGMCC 1243 fermentation broth by macroporous resin adsorption chromatography was investigated. The research results indicated that S-8 resin offered the best adsorption and desorption capacities for α-arbutin than others and its equilibrium adsorption data were well-fitted to the Freundlich isotherm. In order to optimize the operating parameters for separating α-arbutin, dynamic adsorption and desorption tests on S-8 column chromatography were carried out. Under optimized conditions (adsorption volume of 7 bed volume (BV), mobile phase of 25% (v/v) ethanol solution and elution volume of 3 BV), the purity and recovery of α-arbutin were 97.3% (w/w) and 90.9% (w/w), respectively. The product was identified as α-arbutin by (13)C NMR and (1)H NMR analysis. Moreover, we scaled up S-8 column from laboratory test (10 cm × 2 cm ID) to large scale (500 cm × 100 cm ID) without diminishing α-arbutin yield. In conclusion, the results in this work provide a one-step and cost-effective method for large-scale production of α-arbutin. Copyright © 2013. Published by Elsevier B.V.

  17. The behavior of cardiac progenitor cells on macroporous pericardium-derived scaffolds.

    Science.gov (United States)

    Rajabi-Zeleti, Sareh; Jalili-Firoozinezhad, Sasan; Azarnia, Mahnaz; Khayyatan, Fahimeh; Vahdat, Sadaf; Nikeghbalian, Saman; Khademhosseini, Ali; Baharvand, Hossein; Aghdami, Nasser

    2014-01-01

    Cardiovascular diseases hold the highest mortality rate among other illnesses which reveals the significance of current limitations in common therapies. Three-dimensional (3D) scaffolds have been utilized as potential therapies for treating heart failure following myocardial infarction (MI). In particular, native tissues have numerous properties that make them potentially useful scaffolding materials for recreating the native cardiac extracellular matrix (ECM). Here, we have developed a pericardium-derived scaffold that mimics the natural myocardial extracellular environment and investigated its properties for cardiac tissue engineering. Human pericardium membranes (PMs) were decellularized to yield 3D macroporous pericardium scaffolds (PSs) with well-defined architecture and interconnected pores. PSs enabled human Sca-1(+) cardiac progenitor cells (CPCs) to migrate, survive, proliferate and differentiate at higher rates compared with decellularized pericardium membranes (DPMs) and collagen scaffolds (COLs). Interestingly, histological examination of subcutaneous transplanted scaffolds after one month revealed low immunological response, enhanced angiogenesis and cardiomyocyte differentiation in PSs compared to DPMs and COLs. This research demonstrates the feasibility of fabricating 3D porous scaffolds from native ECMs and suggests the therapeutic potential of CPC-seeded PSs in the treatment of ischemic heart diseases. Copyright © 2013 Elsevier Ltd. All rights reserved.

  18. Adsorption Behavior and Mechanism of Macroporous Phosphonic Acid Resin for Lu3+

    Institute of Scientific and Technical Information of China (English)

    WANG Hui-jun; XIONG Chun-hua

    2006-01-01

    The article is based on a research on the adsorption behavior and adsorption mechanism of macroporous phosphonic acid resin (PAR) for Lu3+ and the influence of the medium's pH, adsorption temperature, adsorption time, etc on adsorbing Lu3 + . The best value of medium's pH to the adsorption of PAR for Lu3 + was found to be 4.92. The static adsorption maximum capacity of PAR for Lu3 + is 220 mg· g-1. The thermodynamic adsorption parameters are respectively △H= 11.3 kJ·mol-1, △S =46.3 J·mol-1 ·K-1, △G = - 2.50 kJ·mol-1 and the apparent activity energy is Ea= 31.4 kJ· mol- 1. The adsorption behavior of PAR for Lu3 + obeys the Freundlich isotherm. The apparent adsorption rate constant is k298 = 4.68 × 10-5 s-1. The coordinate ratio of the functional radical to Lu3 + is approximately 4: 1. The best eluant is 1.0 mol· L- 1 HCl. The adsorption mechanism of PAR for Lu3 + was separately confirmed by chemical analysis and IR spectra.

  19. Nano-WO3 film modified macro-porous silicon (MPS) gas sensor

    Institute of Scientific and Technical Information of China (English)

    Sun Peng; Hu Ming; Li Mingda; Ma Shuangyun

    2012-01-01

    We prepared macro-porous silicon (MPS) by electrochemical corrosion in a double-tank cell on the surface of single-crystalline P-type silicon.Then,nano-WO3 films were deposited on MPS layers by DC facing target reactive magnetron sputtering.The morphologies of the MPS and WOs/MPS samples were investigated by using a field emission scanning electron microscope.The crystallization of WO3 and the valence of the W in the WO3/MPS sample were characterized by X-ray diffraction and X-ray photoelectron spectroscopy,respectively.The gas sensing properties of MPS and WO3/MPS gas sensors were thoroughly measured at room temperature.It can be concluded that:the WO3/MPS gas sensor shows the gas sensing properties of a P-type semiconductor gas sensor.The WO3/MPS gas sensor exhibits good recovery characteristics and repeatability to l ppm NO2.The addition of WO3 can enhance the sensitivity of MPS to NO2.The long-term stability ofa WO3/MPS gas sensor is better than that of an MPS gas sensor.The sensitivity of the WO3/MPS gas sensor to NO2 is higher than that to NH3 and C2H5OH.The selectivity of the MPS to NO2 is modified by deposited nano-WO3 film.

  20. Study of macroporous silicon electrochemical etching in 3D structured N type silicon substrates

    Energy Technology Data Exchange (ETDEWEB)

    Kouassi, Sebastien; Gautier, Gael; Desplobain, Sebastien; Ventura, Laurent [Laboratoire de Microelectronique de Puissance, Universite Francois Rabelais Tours, 16 Rue Pierre et Marie Curie, 37071 Tours Cedex 2 (France)

    2011-06-15

    In this paper, the electrochemical etching of 3D n-type substrates is investigated. These types of 3D structures are of interest to increase the active surface of some systems. Our aim is to improve a MEMS (Micro-Electro Mechanical System) micro fuel cell power through total surface enhancement without any modification of the cell footprint. To reach this objective, we perform a gas diffusion layer using localized macro-porous silicon. The porous area total surface is improved through trench formation (before porous silicon etching). This is supposed to allow a better power to surface ratio for manufactured fuel cell. The Figure on the right hand side introduces the aimed MEMS based micro fuel cell. The geometrical parameters of the designed structures and the manufacturing process influence are presented. To perform 3D structures, two types of anisotropic etching techniques have been used, alkaline etching of silicon and deep reactive ion etching (DRIE). Additional steps such as a doping layer have been used to improve the results obtained with the initial micro-fabrication process. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  1. Betavoltaic and photovoltaic energy conversion in three-dimensional macroporous silicon diodes

    Energy Technology Data Exchange (ETDEWEB)

    Clarkson, J.P. [Materials Science Program, University of Rochester, Rochester, New York 14627 (United States); Sun, W. [Dept. of Biomedical Engineering, University of Rochester, Rochester, New York 14627 (United States); Hirschman, K.D. [Microelectronic Engineering Dept., Rochester Institute of Technology, Rochester, NY 14623 (United States); Gadeken, L.L. [BetaBatt, Inc., 12819 Westleigh Drive, Houston, Texas 77077 (United States); Fauchet, P.M. [Dept. of Electrical and Computer Engineering, University of Rochester, Rochester, NY 14627 (United States)

    2007-05-15

    A three-dimensional p-n diode structure is presented for the generation of energy via photovoltaic and betavoltaic modes of operation. Macroporous Silicon (MPS) has a large degree of internal surface area and its vertically oriented pores, which extend deep into the bulk of the Si substrate, allow for the creation of three-dimensional structures. In this device the MPS will not only serve as a means for creating 3D diode structures, it will also serve as a host matrix for a tritium isotope which emits energetic beta particles. By varying electrochemical etching conditions and using a prepatterning technique, 1.1 {mu}m diameter pores with a spacing of 2.5 {mu}m were achieved. The p-n junction was created using a rapid thermal process (RTP) which relies on the diffusion from an n-type solid source into the MPS. To ensure the quality of the diode structure, devices were tested using a light source which resulted in a photovoltaic response. Finally, betavoltaic operation was demonstrated by exposing devices to a tritium gas source. The average energy conversion efficiency of the first generation 3D diode was one order of magnitude higher than that of a similar planar device. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  2. Glycidyl methacrylate macroporous copolymer grafted with diethylene triamine as sorbent for Reactive Black 5

    Directory of Open Access Journals (Sweden)

    Sandić Zvjezdana P.

    2014-01-01

    Full Text Available In this paper, macroporous glycidyl methacrylate and ethylene glycol dimethacrylate copolymer functionalized with diethylene triamine [PGME-deta], was evaluated as Reactive Black 5 (RB5 sorbent. Batch RB5 removal from aqueous solution by PGME-deta was investigated by varying pH, contact time, sorbent dosage, initial dye concentration and temperature. The sorption is pH sensitive having maximum at pH 2 (dye removal of 85%, decreasing with the increase of pH (dye removal of 24% at pH=11 after 60 min. Sorption kinetics was fitted to chemical-reaction and particle-diffusion models (pseudo-first-order, pseudo-second-order, intraparticle diffusion and Mckay models. The pseudo-second-order kinetic model accurately predicted the RB5 amount sorbed under all investigated operating conditions, while the intraparticle diffusion was the dominant rate-limiting mechanism. The diffusion mechanism was more prevalent with the decrease in temperature and the increase in concentration. The isotherm data was best fitted with the Langmuir model, indicating homogeneous distribution of active sites on PGME-deta and monolayer sorption, with the maximum sorption capacity of 353 mg g-1. The calculated sorption rates improved with increasing temperature and an activation energy close to 40 kJ mol-1 was determined, suggesting that chemisorption was also rate-controlling. [Projekat Ministarstva nauke Republike Srbije, br. III 43009, br. TR 37021 i br. III 45001

  3. Separation and purification of amygdalin from thinned bayberry kernels by macroporous adsorption resins.

    Science.gov (United States)

    Wang, Tao; Lu, Shengmin; Xia, Qile; Fang, Zhongxiang; Johnson, Stuart

    2015-01-15

    To utilize the low-value thinned bayberry (Myrica rubra Sieb. et Zucc) kernels (TBKs) waste, an efficient method using macroporous adsorption resins (MARs) for separation and purification of amygdalin from TBKs crude extracts was developed. An aqueous crude sample was prepared from a methanol TBK extract, followed by resin separation. A series of MARs were initially screened for adsorption/desorption of amygdalin in the extract, and D101 was selected for characterization and method development. The static adsorption data of amygdalin on D101 was best fitted to the pseudo-second-order kinetics model. The solute affinity toward D101 at 30 °C was described and the equilibrium experimental data were well-fitted to Langmuir and Freundlich isotherms. Through one cycle of dynamic adsorption/desorption, the purity of amygdalin in the extract, determined by HPLC, increased about 17-fold from 4.8% to 82.0%, with 77.9% recovery. The results suggested that D101 resin effectively separate amygdalin from TBKs. Copyright © 2014 Elsevier B.V. All rights reserved.

  4. Macropores in Vadose Zone of Well Vegetated Slopes%植被发育斜坡非饱和带大孔隙

    Institute of Scientific and Technical Information of China (English)

    张家明; 徐则民; 裴银鸽

    2012-01-01

    In warm and humid landslide prone area,root channels,faunal tunnels,shrinkage cracks,pipes and inter aggregate porosity are common in vadose zones of hillslopes. By using microscopic observation, chemical analysis and field experiment method, combining the existing research achievements in relative fields, the definitions of macropores, the types of macropores and controlling factors, the three dimensional spatial structure of macropores and the temporal stability of macropores in well vegetated slope were analyzed. The differences between different measurement methods and the temporal and spatial variability of macropores density are causes of no consensus for the definition of macropores. Macropores size alone is not a sufficient criterion for the definition of a macropore, and then three dimensional geometry morphology of macropores must be take into consideration. The formation and the type of macropores are controlled by several factors. Root channels, shrinkage cracks and inter aggregate porosity makes a significant contribution to preferential flow. The spatial structure of macropores needs to be further investigated from two aspects of three dimensional geometry and topology. Litters protect the soil beneath from rainfall impact and filter out the fine particles that may clog macropores, but water transfer between macropores domain and the surrounding soil matrix domain have negative effects. An indepth research of above questions is important for the improvement and development of preferential flow model of well vegetated slopes.%在气候温湿的滑坡灾害易发区,根系通道、动物通道、干裂缝、管道及团聚体间的结构性孔隙等大孔隙普遍存在于斜坡非饱和带中.采用微观观察、化学分析和现场试验方法并结合相关学科的研究成果,分析大孔隙界定、大孔隙类型和主控因素、大孔隙三维空间结构及大孔隙时效稳定.不同测量方法的差异和大孔隙密度时空变异性是

  5. Development of Three-Dimensional Multicellular Tissue-Like Constructs for Mutational Analysis Using Macroporous Microcarriers

    Science.gov (United States)

    Jordan, Jacqueline A.; Fraga, Denise N.; Gonda, Steve R.

    2002-01-01

    A three-dimensional (3-D), tissue-like model was developed for the genotoxic assessment of space environment. In previous experiments, we found that culturing mammalian cells in a NASA-designed bioreactor, using Cytodex-3 beads as a scaffold, generated 3-D multicellular spheroids. In an effort to generate scaffold-free spheroids, we developed a new 3-D tissue-like model by coculturing fibroblast and epithelial cell in a NASA bioreactor using macroporous Cultispher-S(TradeMark) microcarriers. Big Blue(Registered Trademark) Rat 2(Lambda) fibroblasts, genetically engineered to contain multiple copies (>60 copies/cell) of the Lac I target gene, were cocultured with radio-sensitive human epithelial cells, H184F5. Over an 8-day period, samples were periodically examined by microscopy and histology to confirm cell attachment, growth, and viability. Immunohistochemistry and western analysis were used to evaluate the expression of specific cytoskeletal and adhesion proteins. Key cell culture parameters (glucose, pH, and lactate concentrations) were monitored daily. Controls were two-dimensional mono layers of fibroblast or epithelial cells cultured in T-flasks. Analysis of 3-D spheroids from the bioreactor suggests fibroblast cells attached to and completely covered the bead surface and inner channels by day 3 in the bioreactor. Treatment of the 3-day spheroids with dispase II dissolved the Cultisphers(TradeMark) and produced multicellular, bead-less constructs. Immunohistochemistry confirmed the presence of vi.mentin, cytokeratin and E-cadherin in treated spheroids. Examination of the dispase II treated spheroids with transmission electron microscopy (TEM) also showed the presence of desmosomes. These results suggest that the controlled enzymatic degradation of an artificial matrix in the low shear environment of the NASA-designed bioreactor can produce 3-D tissue-like spheroids. 2

  6. Inflatable Elastomeric Macroporous Polymers Synthesized from Medium Internal Phase Emulsion Templates.

    Science.gov (United States)

    Tebboth, Michael; Jiang, Qixiang; Kogelbauer, Andreas; Bismarck, Alexander

    2015-09-02

    Closed cell elastomeric polydimethylsiloxane (PDMS) based polymerized medium internal phase emulsions (polyMIPEs) containing an aqueous solution of sodium hydrogen carbonate (NaHCO3) have been produced. Via thermal decomposition of NaHCO3, carbon dioxide was released into the polyMIPE structure to act as a blowing agent. When placed into an atmosphere with reduced pressure, these macroporous elastomers expanded to many times their original size, with a maximum expansion of 30 times. This expansion was found to be repeatable and reproducible. The extent of volume expansion was determined primarily by the dispersed phase volume ratio of the emulsion template; polyMIPEs with 60% dispersed phase content produced greater volume expansion ratios than polyMIPEs with 50% dispersed phase. Increasing the concentration of NaHCO3 in the dispersed phase also led to increased expansion due to the greater volume of gas forming within the porous structure of the silicone elastomer. The expansion ratio could be increased by doubling the agitation time during the emulsification process to form the MIPEs, as this decreased the pore wall thickness and hence the elastic restoring force of the porous silicone elastomer. Although MIPEs with 70% dispersed phase could be stabilized and successfully cured, the resultant polyMIPE was mechanically too weak and expanded less than polyMIPEs with a dispersed phase of 60%. It was also possible to cast the liquid emulsion into thin polyMIPE films, which could be expanded in vacuum, demonstrating that these materials have potential for use in self-sealing containers.

  7. Meso- and macroporous sulfonated starch solid acid catalyst for esterification of palm fatty acid

    Directory of Open Access Journals (Sweden)

    Ibrahim M. Lokman

    2016-03-01

    Full Text Available In the present work, a heterogeneous solid acid catalyst was successfully developed from starch. The catalyst was prepared by a significant two-step process; the initial step was incomplete carbonization of starch (ICS at 400 °C for 12 h and consequently followed by sulfonation process using concentrated H2SO4 to produce sulfonated-incomplete carbonized starch (ICS-SO3H. The characterization of the ICS-SO3H catalyst was done for chemical and physical properties such as X-ray diffraction (XRD, ammonia-temperature programmed desorption (NH3-TPD, surface area analysis, thermal gravimetric analysis (TGA, elemental analysis and morphology analysis by scanning electron microscope (SEM. BET results showed the structure of ICS-SO3H consists of meso- and macro-porous properties, which allowed high density of the SO3H group attached on its carbon networks. The catalytic activity of ICS-SO3H catalyst was determined by analyzing the catalyst performance to esterify palm fatty acid distillate (PFAD and sequentially produced methyl ester. The maximum free fatty acid (FFA conversion and FAME yield were as high as 94.6% and 90.4%, respectively, at 75 °C using 10:1 methanol-to-PFAD molar ratio and 2 wt.% of catalyst within 3 h. The catalyst has sufficient potential to recycle up to 6 reactions without reactivation step and any remarkable loss of catalytic activity. It revealed that the heterogeneous ICS-SO3H catalyst exhibits high stability, reusability and catalytic activity.

  8. SYNTHESIS OF MACROPOROUS HUMIC ACID RESINS AND THEIR CHELATING PROPERTIES FOR HEAVY METAL IONS

    Institute of Scientific and Technical Information of China (English)

    CHEN Yiyong; MAO Xueqin; ZHU Dongwei; ZHENG Ping

    1984-01-01

    Macroporous HA resins (HAR) can be prepared in pearl form by grafting HA onto crosslinkec PS through azo or through ester and / or ether linkages. At pH 13 and the HA / PSNH2 weight ratio 0.7-1.0, PSN2+Cl-couples with HA and results in the formation of azo-type HA resin (HAR-A), which shows good adsorbility towards heavy metal ions. The Cu2+ sorption capacity of ester / ether type humic acid resin (HAR-E) is increased by lengthening the reaction time of HA and PSCH2Cl. The structure of HAR is discussed on the basis of the IR spectra. The sorption capacity of HAR-A is 1.01 mmol / g for Cd2+and 0.6-0.53 mmol/g for Ni2+,Mn2+,Cu2+,Co3+ and Zn2+, respectively. The calculated distribution coefficients of heavy metal ions on HAR-A can be arranged in the following order: CuV+(8.7 × 103)>Cd2+(3.8 × 102)>Zn2+(2.4 × 102)>Ni2+(1. 8 × 102)>Mn2+(4.9 × 10). At pH 6.5, Cu2+, Cd2+, Ni2+, Mn2+ can be quantitatively adsorbed by HAR-A and completely eluted with 1N HNO3. HAR-A can be regenerated and reused Trace quantities of the above-mentioned heavy metal ions in four samples of the natural occurring water and one sample of the tap water were analyzed by using HAR-A.

  9. Accelerated healing of full thickness dermal wounds by macroporous waterborne polyurethane-chitosan hydrogel scaffolds.

    Science.gov (United States)

    Bankoti, Kamakshi; Rameshbabu, Arun Prabhu; Datta, Sayanti; Maity, Priti Prasanna; Goswami, Piyali; Datta, Pallab; Ghosh, Sudip Kumar; Mitra, Analava; Dhara, Santanu

    2017-12-01

    Wound healing is a dynamic process wherein cells, and macromolecules work in consonance to facilitate tissue regeneration and restore tissue integrity. In the case of full-thickness (FT) wounds, healing requires additional support from native or synthetic matrices to aid tissue regeneration. In particular, a matrix with optimum hydrophilic-hydrophobic balance which will undergo adequate swelling as well as reduce bacterial adhesion has remained elusive. In the present study, polyurethane diol dispersion (PUD) and the anti-bacterial chitosan (Chn) were blended in different ratios which self-organized to form macroporous hydrogel scaffolds (MHS) at room temperature on drying. SEM and AFM micrographs revealed the macroporosity on top and fracture surfaces of the MHS. FTIR spectra revealed the intermolecular as well as intra-molecular hydrogen bonding interactions between the two polymers responsible for phase separation, which was also observed by micrographs of blend solutions during the drying process. The effect of phase separation on mechanical properties and in vitro degradation (hydrolytic, enzymatic and pH dependent) of MHS were studied and found to be suitable for wound healing. In vitro cytocompatibility was demonstrated by the proliferation of primary rat fibroblast cells on MHS. Selected MHS was subjected to in vivo FT wound healing study in Wistar rats and compared with an analogous polyurethane containing commercial dressing i.e. Tegaderm™. The MHS-treated wounds demonstrated accelerated healing with increased wound contraction, higher collagen synthesis, and vascularization in wound area compared to Tegaderm™. Thus, it is concluded that the developed MHS is a promising candidate for application as FT wound healing dressings. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Study of resonant modes in a 700 nm pitch macroporous silicon photonic crystal

    Science.gov (United States)

    Cardador, D.; Vega, D.; Segura, D.; Rodríguez, A.

    2017-01-01

    In this study the modes produced by a defect inserted in a macroporous silicon (MP) photonic crystal (PC) have been studied theoretical and experimentally. In particular, the transmitted and reflected spectra have been analyzed for variations in the defect's length and width. The performed simulations show that the resonant frequency is more easily adjusted for the fabricated samples by length tuning rather than width. The optimum resonance peak results when centered in the PC bandgap. The changes in the defect geometry result in small variations of the optical response of the PC. The resonance frequency is most sensitive to length variations, while the mode linewidth shows greater change with the defect width variation. Several MPS photonic crystals were fabricated by the electrochemical etching (EE) process with optical response in the range of 5.8 μm to 6.5 μm. Results of the characterization are in good agreement with simulations. Further samples were fabricated consisting of ordered modulated pores with a pitch of 700 nm. This allowed to reduce the vertical periodicity and therefore to have the optical response in the range of 4.4 μm to 4.8 μm. To our knowledge, modes working in this range of wavelengths have not been previously reported in 3-d MPS structures. Experimental results match with simulations, showing a linear relationship between the defect's length and working frequency inside the bandgap. We demonstrate the possibility of tailoring the resonance peak in both ranges of wavelengths, where the principal absorption lines of different gases in the mid infrared are placed. This makes these structures very promising for their application to compact gas sensors.

  11. Adsorption of polyethylene-glycolated bovine serum albumin on macroporous and polymer-grafted anion exchangers.

    Science.gov (United States)

    Zhu, Mimi; Carta, Giorgio

    2014-01-24

    The chromatographic and adsorptive properties of BSA and BSA conjugated with 10 and 30kDa PEG polymers are determined for a macroporous anion exchanger (UNOsphere™ Diol Q) and for a polymer-grafted material having the same backbone matrix (Nuvia Q™). Chromatographic retention, adsorption capacity, and adsorption kinetics are enhanced in the polymer-grafted resin for both BSA and 10kDa PEG-BSA as a result of interactions with the grafted polymers. However, the difference between the two resins diminishes for 30kDa PEG-BSA indicating that size exclusion effects strongly affect binding in the polymer-grafted material for this larger conjugate. Images of intraparticle concentration profiles obtained by confocal scanning laser microscopy show that the transport mechanisms of both BSA and PEGylated BSA are very different in the two resins. The protein binding kinetics are dominated by ordinary pore diffusion and are essentially independent of the direction of transport for UNOsphere Diol Q as a result of its large pore size. Thus, for this material, displacement of PEGylated BSA by BSA is clearly evident at the intraparticle scale. On the other hand, the protein binding kinetics in Nuvia Q are consistent with a solid diffusion mechanism driven by the adsorbed protein concentration. For this material, protein transport is very fast for one component or two-component co-adsorption of BSA and PEGylated BSA but slows down dramatically for sequential adsorption of these species as a result of heightened diffusional hindrance when the two components counterdiffuse within the resin.

  12. Influence of activation on the multipoint immobilization of penicillin G acylase on macroporous silica

    Directory of Open Access Journals (Sweden)

    H.C.T. CARDIAS

    1999-06-01

    Full Text Available Penicillin G acylase is the second most important enzyme used by industry in an immobilized form. Penicillin hydrolysis is its main application. This reaction is used to produce 6-aminopenicillanic acid (6-APA, an intermediate in the synthesis of semisynthetic antibiotics. This work aims to compare catalytic properties of different penicillin G acylase (PGA derivatives obtained by multipoint immobilization of the enzyme on macroporous silica. Enzyme amino groups react with different aldehyde groups produced in the support using either glutaraldehyde or glyoxyl activation. In the former method, silica reacts with g-aminopropyltriethoxysilane (g-APTS and glutaraldehyde; in the latter, a reaction with glycidoxypropyltrimethoxysilane (GPTMS is followed by acid hydrolysis and oxidation using sodium periodate. This work determines the influence of degree of activation, using glutaraldehyde, on immobilization parameters. PGA was immobilized on these two different supports. Maximum enzyme load, immobilized enzyme activity (derivative activity, rate of immobilization and thermal stability were checked for both cases. For glutaraldehyde activation, the results showed that 0.5% of the g-APTS is sufficient for all the hydroxyl groups in the silica to react. They also showed that degree of activation only affects immobilization yield and reaction velocity and that reduction of the glutaraldehyde derivatives with sodium borohydride does not affect their thermal stability. In comparing the derivatives obtained using glyoxyl and glutaraldehyde activation, it was observed that the glyoxyl derivatives presented better immobilization parameters, with a maximum enzyme load of 264 IU/g silica and a half-life of 20 minutes at 60 °C.

  13. Dual permeability modeling of tile drain management influences on hydrologic and nutrient transport characteristics in macroporous soil

    Science.gov (United States)

    Frey, Steven K.; Hwang, Hyoun-Tae; Park, Young-Jin; Hussain, Syed I.; Gottschall, Natalie; Edwards, Mark; Lapen, David R.

    2016-04-01

    Tile drainage management is considered a beneficial management practice (BMP) for reducing nutrient loads in surface water. In this study, 2-dimensional dual permeability models were developed to simulate flow and transport following liquid swine manure and rhodamine WT (strongly sorbing) tracer application on macroporous clay loam soils under controlled (CD) and free drainage (FD) tile management. Dominant flow and transport characteristics were successfully replicated, including higher and more continuous tile discharge and lower peak rhodamine WT concentrations in FD tile effluent; in relation to CD, where discharge was intermittent, peak rhodamine concentrations higher, and mass exchange from macropores into the soil matrix greater. Explicit representation of preferential flow was essential, as macropores transmitted >98% of surface infiltration, tile flow, and tile solute loads for both FD and CD. Incorporating an active 3rd type lower boundary condition that facilitated groundwater interaction was imperative for simulating CD, as the higher (relative to FD) water table enhanced water and soluble nutrient movement from the soil profile into deeper groundwater. Scenario analysis revealed that in conditions where slight upwards hydraulic gradients exist beneath tiles, groundwater upwelling can influence the concentration of surface derived solutes in tile effluent under FD conditions; whereas the higher and flatter CD water table can restrict groundwater upwelling. Results show that while CD can reduce tile discharge, it can also lead to an increase in surface-application derived nutrient concentrations in tile effluent and hence surface water receptors, and it can promote NO3 loading into groundwater. This study demonstrates dual permeability modeling as a tool for increasing the conceptual understanding of tile drainage BMPs.

  14. Uneven biofilm and current distribution in three-dimensional macroporous anodes of bio-electrochemical systems composed of graphite electrode arrays.

    Science.gov (United States)

    Li, Jun; Hu, Linbin; Zhang, Liang; Ye, Ding-Ding; Zhu, Xun; Liao, Qiang

    2017-03-01

    A 3-D macroporous anode was constructed using different numbers of graphite rod arrays in fixed-volume bio-electrochemical systems (BESs), and the current and biofilm distribution were investigated by dividing the 3-D anode into several subunits. In the fixed-volume chamber, current production was not significantly improved after the electrode number increased to 36. In the case of 100 electrodes, a significant uneven current distribution was found in the macroporous anode. This was attributed to a differential pH distribution, which resulted from proton accumulation inside the macroporous anode. The pH distribution influenced the biofilm development and led to an uneven biofilm distribution. With respect to current generation, the uneven distribution of both the pH and biofilm contributed to the uneven current distribution. The center had a low pH, which led to less biofilm and a lower contribution to the total current, limiting the performance of the BESs.

  15. SYNTHESIS AND STRUCTURE OF MACROPOROUS MA—TMPTA COPOLYMERS AND THEIR APPLICATION IN ADSORPTION OF FLAVONOIDE FROM GINKGO LEAVES EXTRACT

    Institute of Scientific and Technical Information of China (English)

    SHIZuoqing; XUMancai; 等

    2000-01-01

    Spherical macroporous copolymers of methyl acrylate and trimethylopropane triacrylate with different surface and pore structure were synthesized via suspension polymerization.and their surface and pore structure were characterized by measurements of surface area,apparent density and skeleton density and calculation of average pore diameter,The results revealed that crosslinking degree and porogent determined the physical structure of these copolymers.Some of the copolymers were applied to adsorptive purification of ginkgo leaves extract to enhance the content of flavonoids,the results showed that most of the copolymers could by used to increase the flavonids content.

  16. Controllable modification of nanostructured carbon with hollow macroporous core/mesoporous shell and its application as templates in aqueous solution

    Science.gov (United States)

    Ren, Xiaona; Xia, Min; Yan, Qingzhi; Ge, Changchun

    2016-10-01

    Controllable modification of hydrophilic groups on tubular nanostructured carbon with hollow macroporous core/mesoporous shell (TNC-HMC/MS) was systematically studied and the mesoporous structure of TNC-HMC/MS has been kept. Different oxidants were used to modify the TNC-HMC/MS. Results revealed that the TNC-HMC/MS could be modified with carboxyl or hydroxy by different oxidants. More importantly, the BET/BJH results indicated that the mesoporous shell of TNC-HMC/MS has not been destroyed. In addition, water-soluble ammonium metatungstate has been encapsulated into the hollow core of TNC-HMC/MS and formed nanodot, bamboo-like and nanowire morphology.

  17. Preparation, characterization and application of modified macroporous carbon with Cosbnd N site for long-life lithium-sulfur battery

    Science.gov (United States)

    Jin, L. M.; He, F.; Cai, W. L.; Huang, J. X.; Liu, B. H.; Li, Z. P.

    2016-10-01

    A modified macroporous carbon (mMPC) containing Cosbnd Nx site is developed for sulfur retention to enhance cycleability of lithium-sulfur battery. Various nitrogen sites such as graphitic-N, pyrrolic-N, pyridinic-N, pyridinic-N oxide, and Cosbnd Nx are created during macropore formation. The sites without Co show limited polysulfide (PS) adsorption capability because nucleophilic N absorbs PS species via the weak interaction between N and Li in Nsbnd Lisbnd S bondage. The electrophilic Co(II) in Cosbnd Nx absorbs PS species via a strong interaction between S and Co in Ssbnd Co bond. The dual interaction of Cosbnd Nx site with Ssbnd Co and Nsbnd Lisbnd S bondages significantly enhances the PS adsorption. The resultant Li-S battery with the mMPC shows excellent cycleability, exhibiting a very low capacity degradation rate of 0.25 mAh g-1 per cycle after initial 20 cycles. A rate capacity as high as 660 mAh g-1 has been achieved after 300 cycles at 1 C charge-discharge rate.

  18. Photocatalytic activity of erbium-doped TiO{sub 2} nanoparticles immobilized in macro-porous silica films

    Energy Technology Data Exchange (ETDEWEB)

    Castaneda-Contreras, J., E-mail: jcc050769@yahoo.com.mx [C.U. de los Lagos, Universidad de Guadalajara, Lagos de Moreno, Jalisco (Mexico); Maranon-Ruiz, V.F.; Chiu-Zarate, R.; Perez-Ladron de Guevara, H.; Rodriguez, R. [C.U. de los Lagos, Universidad de Guadalajara, Lagos de Moreno, Jalisco (Mexico); Michel-Uribe, C. [C. U. de Ciencias Exactas e Ingenieria, Universidad de Guadalajara, Guadalajara, Jalisco (Mexico)

    2012-02-15

    Highlights: Black-Right-Pointing-Pointer Erbium-doped TiO{sub 2} nanoparticles were immobilized on macro-porous silica films. Black-Right-Pointing-Pointer The films were obtained by a phase separation process. Black-Right-Pointing-Pointer The samples exhibited photo-catalytic activity under visible light. Black-Right-Pointing-Pointer The sensitization of TiO{sub 2} was attributed to a red shift in the TiO{sub 2} band-gap. -- Abstract: A macro-porous silica film served as mechanical support to immobilize TiO{sub 2} nanoparticles, which were doped with erbium. The films and the nanoparticles were prepared by sol-gel route. The nanoparticles exhibited photocatalytic activity under visible light. We obtained a degradation rate of methylene blue that followed first order kinetics. The sensitization of the nanoparticles to visible light was attributed to a red shift in the band-gap of the TiO{sub 2} due to the addition of erbium ions.

  19. Controlled modification of carbon nanotubes and polyaniline on macroporous graphite felt for high-performance microbial fuel cell anode

    Science.gov (United States)

    Cui, Hui-Fang; Du, Lin; Guo, Peng-Bo; Zhu, Bao; Luong, John H. T.

    2015-06-01

    Polyaniline (PANI) was electropolymerized on the surface of macroporous graphite felt (GF) followed by the electrophoretic deposition of carbon nanotubes (CNTs). The as-prepared macroporous material was characterized by scanning electron microscopy, water contact angle goniometry and electrochemical techniques. Upon the modification of PANI, a rough and nano-cilia containing film is coated on the surface of the graphite fibers, transforming the surface from hydrophobic to hydrophilic. The subsequent modification by CNTs increases the effective surface area and electrical conductivity of the resulting material. The power output of a mediator-free dual-chamber microbial fuel cell (MFC) constructed from the GF anode and an exoelectrogen Shewanella putrefaciens increases drastically with the CNT modification. The CNT/PANI/GF MFC attains an output voltage of 342 mV across an external resistor of 1.96 kΩ constant load, and a maximum power density of 257 mW m-2, increased by 343% and 186%, compared to that of the pristine GF MFC and the PANI/GF MFC, respectively. More bacteria are attached on the CNT/PANI/GF anode than on the PANI/GF anode during the working of the MFC. This strategy provides an easy scale-up, simple and controllable method for the preparation of high-performance and low-cost MFC anodes.

  20. Self-floating carbon nanotube membrane on macroporous silica substrate for highly efficient solar-driven interfacial water evaporation

    KAUST Repository

    Wang, Yuchao

    2016-01-22

    Given the emerging energy and water challenges facing the mankind, solar-driven water evaporation has been gaining renewed research attention from both academia and industry as an energy efficient means of wastewater treatment and clean water production. In this project, a bi-layered material, consisting of a top self-floating hydrophobic CNT membrane and a bottom hydrophilic macroporous silica substrate, was rationally designed and fabricated for highly energy-efficient solar driven water evaporation based on the concept of interfacial heating. The top thin CNT membrane with excellent light adsorption capability, acted as photothermal component, which harvested and converted almost the entire incident light to heat for exclusively heating of interfacial water. On the other hand, the macroporous silica substrate provided multi-functions toward further improvement of operation stability and water evaporation performance of the material, including water pumping, mechanical support and heat barriers. The silica substrate was conducive in forming the rough surface structures of the CNT top layers during vacuum filtration and thus indirectly contributed to high light adsorption by the top CNT layers. With optimized thicknesses of the CNT top layer and silica substrate, a solar thermal conversion efficiency of 82 % was achieved in this study. The bi-layered material also showed great performance toward water evaporation from seawater and contaminated water, realizing the separation of water from pollutants, and indicating its application versatility.

  1. Low-cost removal of organic pollutants with nickel nanoparticle loaded ordered macroporous hydrogel as high performance catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Mingyi, E-mail: tmyi@tjcu.edu.cn [Department of Applied Chemistry, School of Science, Tianjin University of Commerce, Tianjin 300134 (China); Huang, Guanbo, E-mail: gbhuang2007@hotmail.com [Department of Chemistry, School of Science, Tianjin University, Tianjin 300072 (China); Zhang, Sai [Department of Applied Chemistry, School of Science, Tianjin University of Commerce, Tianjin 300134 (China); Liu, Yue [Department of Chemistry, School of Science, Tianjin University, Tianjin 300072 (China); Li, Xianxian [Department of Applied Chemistry, School of Science, Tianjin University of Commerce, Tianjin 300134 (China); Wang, Xingrui [Department of Chemistry, School of Science, Tianjin University, Tianjin 300072 (China); Pang, Xiaobo [Department of Applied Chemistry, School of Science, Tianjin University of Commerce, Tianjin 300134 (China); Qiu, Haixia, E-mail: qhx@tju.edu.cn [Department of Chemistry, School of Science, Tianjin University, Tianjin 300072 (China)

    2014-06-01

    A facile route for the in situ preparation of catalytically active Ni nanoparticles (NPs) in ordered macroporous hydrogel (OMH) has been developed. The hydrogel was fabricated based on polystyrene colloid template. The electronegativity of amide and carboxyl groups on the poly(acrylamide-co-acryl acid) chains of the hydrogel caused strong binding of Ni{sup 2+} ions which made them distribute uniformly inside the hydrogel. When immersed in NaBH{sub 4} aqueous solution, the Ni{sup 2+} ions on the hydrogel were reduced to Ni NPs. The resultant Ni NPs loaded OMH showed good catalytic activity for the reduction of a common organic pollutant, 4-nitrophenol, with NaBH{sub 4}. A kinetic study of the catalytic reaction was carried out. The rate constant per unit weight could reach 0.53 s{sup −1} g{sup −1}, which is much better than many common hydrogel loaded nickel catalysts. Moreover, the current catalyst can be easily separated and recovered with stable catalytic activity. - Highlights: • A new poly(acrylamide-co-acryl acid) hydrogel with ordered macropores. • A simple in situ fabrication of nickel nanoparticles under mild conditions. • High-performance heterogeneous catalyst for removal of nitrophenol from water. • Good recyclability of catalyst without any complicated regeneration process.

  2. Separation and purification of epigallocatechin-3-gallate (EGCG) from green tea using combined macroporous resin and polyamide column chromatography.

    Science.gov (United States)

    Jin, Xin; Liu, Mingyan; Chen, Zaixing; Mao, Ruikun; Xiao, Qinghuan; Gao, Hua; Wei, Minjie

    2015-10-01

    Epigallocatechin-3-gallate (EGCG) is a major bioactive ingredient of green tea that produces beneficial neuroprotective effects. In this paper, to optimize the EGCG enrichment, thirteen macroporous resins with different chemical and physical properties were systemically evaluated. Among the thirteen tested resins, the H-bond resin HPD826 exhibited best adsorption/desorption capabilities and desorption ratio, as well as weakest affinity for caffeine. The absorption of EGCG on the HPD826 resin followed the pseudo-second-order kinetics and Langmuir isotherm model. The separation parameters of EGCG were optimized by dynamic adsorption/desorption experiments with the HPD826 resin column. Under the optimal condition, the content of EGCG in the 30% ethanol eluent increased by 5.8-fold from 7.7% to 44.6%, with the recovery yield of 72.1%. After further purification on a polyamide column, EGCG with 74.8% purity was obtained in the 40-50% ethanol fraction with a recovery rate of 88.4%. In addition, EGCG with 95.1% purity could be easily obtained after one-step crystallization in distilled water. Our study suggests that the combined macroporous resin and polyamide column chromatography is a simple method for large-scale separation and purification of EGCG from natural plants for food and pharmaceutical applications.

  3. Emulsion-templated macroporous carbons synthesized by hydrothermal carbonization and their application for the enzymatic oxidation of glucose.

    Science.gov (United States)

    Brun, Nicolas; Edembe, Lise; Gounel, Sébastien; Mano, Nicolas; Titirici, Magdalena M

    2013-04-01

    Carbon-based monoliths have been designed using a simple synthetic pathway based on using high internal phase emulsion (HIPE) as a soft template to confine the polymerization and hydrothermal carbonization of saccharide derivatives (furfural) and phenolic compounds (phloroglucinol). Monosaccharides can be isolated from the cellulosic fraction of lignocellulosic biomass and phloroglucinol can be extracted from the bark of fruit trees; however, this approach constitutes an interesting sustainable synthetic route. The macroscopic characteristics can be easily modulated; a high macroporosity and total pore volume of up to 98 % and 18 cm(3)g(-1) have been obtained, respectively. After further thermal treatment under inert atmosphere, the as-synthesized macroporous carbonized HIPEs (carbo-HIPEs) have shaping capabilities relating to interesting mechanical properties as well as a high electrical conductivity of up to 300 Sm(-1) . These conductive foams exhibit a hierarchical structure associated with the presence of both meso- and micropores that exhibit specific Brunauer-Emmett-Teller (BET) surface areas and DFT total pore volumes up to 730 m(2)g(-1) and 0.313 cm(3)g(-1) , respectively. Because of their attractive structural characteristics and intrinsic properties, these macroporous monoliths have been incorporated as a proof of principle within electrochemical devices as modified thin carbon disc electrodes. A promising two-fold improvement in the catalytic current is observed for the electrooxidation of glucose after the immobilization of a glucose oxidase-based biocatalytic mixture onto the carbo-HIPE electrodes compared to that observed if using commercial glassy carbon electrodes.

  4. Multi-functionality of macroporous TiO2 spheres in dye-sensitized and hybrid heterojunction solar cells.

    Science.gov (United States)

    Veerappan, Ganapathy; Jung, Dae-Woong; Kwon, Jeong; Choi, Jeong Mo; Heo, Nansra; Yi, Gi-Ra; Park, Jong Hyeok

    2014-03-25

    Micron-sized macroporous TiO2 spheres (MAC-TiO2) were synthesized using a colloidal templating process inside emulsions, which were then coated on a nanocrystalline TiO2 light absorption film to prepare a bilayered photoanode for liquid-based dye-sensitized solar cells (DSSC) and hybrid heterojunction solid-state solar cells. MAC-TiO2 layers can enhance light scattering as well as absorption, because their pore size and periodicity are comparable to light wavelength for unique multiple scattering and a porous surface can load dye more. Moreover, due to the bicontinuous nature of macropores and TiO2 walls, electrolyte could be transported much faster in between the TiO2 spheres rather than within the small TiO2 nonporous architectures. Electron transport was also facilitated along the interconnected TiO2 walls. In DSSCs with these MAC-TiO2 scattering layers, efficiency was higher than conventional DSSCs incorporating a commercial scattering layer. The unique geometry of MAC-TiO2 results in strong improvements in light scattering and infiltration of hole-transporting materials, thereby the MAC-TiO2-based solid-state device showed comparatively higher efficiency than the device with conventional nanocrystalline TiO2.

  5. ADSORPTION OF TANNIN FROM AQUEOUS SOLUTION ONTO MACROPOROUS CROSSLINKED POLY(N—VINYL—ACETAMIDE)VIA HYDROGEN BONDING

    Institute of Scientific and Technical Information of China (English)

    XUMancai; XUMingcheng; 等

    2000-01-01

    A Strongly hydrophilic hydrogen-bonding adsorbent-macroporous crosslinked Poly(Nvinyl-acetamide),which contain both hydrogen bond acceptor and donator,was synthesized.Adsorption mechanism and dynamic adsorption of tannin from aqueous solution onto the adsorbent were investigated.Most of the differntial adsorption heats for various adsorption capacities calculated from the adsorption isotherms according to Clapeyron-Clausius equation lay in the range of hydrogen bond energy(8-50J/mol).Adsorption properties of the adsorbent were studied in detail.These results revealed a hydrogen bonding mechanism of the adsorption of tannin from aqueous solution onto the adsorbent.The result of the dynamic adsorption of tanning with the initial concentration under 600mg/L showed that the adsorption rate of tannin exceeded 90% when the flow rate was 3BV/h and the effluent volume reached 100BV.Therefore,the developed hydrogen-bonding adsorbent-macroporous crosslinked poly(N-vinyl-acetamide)-is an excellent adsorbent to remove tannin from extract of natural products,and has great value in application.

  6. Enrichment and purification of six Aconitum alkaloids from Aconiti kusnezoffii radix by macroporous resins and quantification by HPLC-MS.

    Science.gov (United States)

    Liu, Jingjing; Li, Qing; Liu, Ran; Yin, Yidi; Chen, Xiaohui; Bi, Kaishun

    2014-06-01

    Aconitine, mesaconitine, hypaconitine, benzoylaconine, benzoylmesaconine and benzoylhypaconine are six main Aconitum alkaloids from traditional Chinese medicine, Aconiti kusnezoffii radix, which possess highly bioactive as well as highly toxic character for medicinal use. In the present study, for the purpose of better utilizing the toxic herbal material, the performance characteristics of NKA-II, D101, X-5, AB-8, S-8, HPD722 and HPD750 macroporous resins for the enrichment and purification of these six Aconitum alkaloids were critically evaluated. Results showed that NKA-II offered the best adsorption and desorption capacities for six Aconitum alkaloids among the seven macroporous resins tested, which were affected significantly by the pH value. Subsequently, dynamic adsorption and desorption experiments had been carried out with the column packed by NKA-II resin to optimize the separation process of six Aconitum alkaloids. After one run treatment with NKA-II resin, the content of total six Aconitum alkaloids were increased from 5.87% to 60.3%, the recovery was 75.8%. Meanwhile, a validated HPLC-MS method had been developed to qualitative and quantitative these six Aconitum alkaloids. This method would provide scientific references to the large-scale production of six Aconitum alkaloids from Aconiti kusnezoffii radix or other plants and might also expand the secure application of these highly toxic components for pharmacy.

  7. Separation of Caffeine and Tea Poly-phenols from Instant (Soluble Tea Waste Liquor by Macro-porous Resins

    Directory of Open Access Journals (Sweden)

    Xueling Gao

    2014-06-01

    Full Text Available Instant tea is presently manufactured by spraying and freeze drying the concentrated brew of processed tea leaves and dust. The purpose of this study was to develop a technique using macro-porous resins for separating Caffeine (Caf and Tea Poly-phenols (TP from the waste liquor generated by manufacturing instant tea. Optimum adsorption conditions were obtained using an initial concentration of Caf solution of 80 mg/L and a flow rate of 1.5 mL/min at 60°C; The optimal desorption conditions were determined using a flow rate of 1.0 mL/min, 80% aqueous ethanol of, eluent volume of 4 times of Bed Volume (BV. After column separation, the purity of Caf was enhanced from 6 to 23%, TP from 38 to 61% and with the final yield of 16.9% following the separation by D101 resin. This study demonstrated macro-porous resin can effectively separated Caf and TP from instant tea waste liquor.

  8. Purification of two triterpenoids from Schisandra chinensis by macroporous resin combined with high-speed counter-current chromatography.

    Science.gov (United States)

    Zhu, Lijie; Li, Bin; Liu, Xiuying; Meng, Xianjun

    2014-10-01

    A method for preparative purification of corosolic acid and nigranoic acid from Schisandra chinensis (SC) was established using a combination of macroporous absorption resin column separation and high-speed counter-current chromatography (HSCCC). The crude extracts obtained from SC using 70% ethanol were separated on a macroporous resin column and then eluted with a graded ethanol series. The 70% ethanol fraction was used as the sample for separation of the two triterpenoids by HSCCC. The two-phase solvent system used for HSCCC separation was chloroform-n-butanol-methanol-water (10:0.5:7:4, v/v/v/v). The upper phase was used as the stationary phase of HSCCC. Corosolic acid (16.4 mg) of 96.3% purity and nigranoic acid (9.5 mg) of 98.9% purity were obtained in a one-step HSCCC separation from 100 mg of the sample. The structures of corosolic acid and nigranoic acid were identified by (1)H-nuclear magnetic resonance (NMR) and (13)C-NMR.

  9. Enrichment and Purification of Deoxyschizandrin and γ-Schizandrin from the Extract of Schisandra chinensis Fruit by Macroporous Resins

    Directory of Open Access Journals (Sweden)

    Ying Zhang

    2012-03-01

    Full Text Available In present study, the performance and separation characteristics of 21 macroporous resins for the enrichment and purification of deoxyschizandrin and γ-schizandrin, the two major lignans from Schisandra chinensis extracts, were evaluated. According to our results, HPD5000, which adsorbs by the molecular tiers model, was the best macroporous resin, offering higher adsorption and desorption capacities and higher adsorption speed for deoxyschizandrin and γ-schizandrin than other resins. Columns packed with HPD5000 resin were used to perform dynamic adsorption and desorption tests to optimize the technical parameters of the separation process. The results showed that the best adsorption time is 4 h, the rate of adsorption is 0.85 mL/min (4 BV/h and the rate of desorption is 0.43 mL/min (2 BV/h. After elution with 90% ethanol, the purity of deoxy-schizandrin increased 12.62-fold from 0.37% to 4.67%, the purity of γ-schizandrin increased 15.8-fold from 0.65% to 10.27%, and the recovery rate was more than 80%.

  10. Separation and purification of both tea seed polysaccharide and saponin from camellia cake extract using macroporous resin.

    Science.gov (United States)

    Yang, Pengjie; Zhou, Mingda; Zhou, Chengyun; Wang, Qian; Zhang, Fangfang; Chen, Jian

    2015-02-01

    A novel method to separate and purify tea seed polysaccharide and tea seed saponin from camellia cake extract by macroporous resin was developed. Among four kinds of resins (AB-8, NKA-9, XDA-6, and D4020) tested, AB-8 macroporous resin possessed optimal separating capacity for the two substances and thus was selected for the separation, in which deionized water was used to elute tea seed polysaccharide, 0.25% NaOH solution to remove the undesired pigments, and 90% ethanol to elute tea seed saponin. Further dynamic adsorption/desorption experiments on AB-8 resin-based column chromatography were conducted to obtain the optimal parameters. Under optimal dynamic adsorption and desorption conditions, 18.7 and 11.8% yield of tea seed polysaccharide and tea seed saponin were obtained with purities of 89.2 and 96.0%, respectively. The developed method provides a potential approach for the large-scale production of tea seed polysaccharide and tea seed saponin from camellia cake. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Novel column-based protein refolding strategy using dye-ligand affinity chromatography based on macroporous biomaterial.

    Science.gov (United States)

    Li, Feng; Dong, Ping-Jun; Zhuang, Qian-Fen

    2009-05-15

    A novel column-based chromatographic protein refolding strategy was developed using dye-ligand affinity chromatography (DLAC) based on macroporous biomaterial. Chitosan-silica (CS-silica) biomaterial with macroporous surface was used as the supporting matrix for the preparation of the DLAC material. The dye-ligand Cibacron Blue F3GA (CBF) was selected as affinity handle and could be covalently immobilized to form dye-ligand affinity adsorbent (CBF-CS-silica) using the reactivity of NH(2) on CS-silica biomaterial. After the model protein catalase was denatured with 6mol/L urea, the denaturant could be rapidly removed and catalase could be successfully refolded as facilitated by the adsorption of CBF-CS-silica. The urea denaturation process and the elute condition for the chromatographic refolding were optimized by measuring tryptophan fluorescence and activity of catalase. The refolding performance of the proposed DLAC was compared with dilution refolding. The protein concentration during the proposed chromatographic refolding increased by a factor of 20 without reducing the yield achieved as compared to dilution refolding. The column-based protein refolding strategy based on dye-ligand affinity chromatography with porous biomaterial being matrix possessed potential in chromatographic refolding of protein.

  12. Aqueous and Template-Free Synthesis of Meso-Macroporous Polymers for Highly Selective Capture and Conversion of CO2.

    Science.gov (United States)

    Huang, Kuan; Liu, Fujian; Jiang, Lilong; Dai, Sheng

    2017-09-01

    Meso-macroporous polymers possessing nitrogen functionality were innovatively synthesized via an aqueous and template-free route in this work. Specifically, the polymerization of 1-(4-vinylbenzyl)-1,3,5,7-tetraazaadamantan-1-ium chloride in aqueous solutions under high temperatures induces the decomposition of hexamethylenetetramine unit into ammonia and formaldehyde molecules, followed by the cross-linking of benzene rings via "resol chemistry". During this process, extended meso-macroporous frameworks were constructed, and meanwhile active nitrogen species were incoporated. Taking the advantage of meso-macroporosity and nitrogen functionality, the synthesized polymers offer competitive CO2 capacities (0.37-1.58 mmol/g at 0˚C and 0.15 bar) and extraodinary CO2/N2 selectivities (155-324 at 0 ˚C). Furthermore, after complexed with metal ions, the synthesized polymers show excellent activity for catalyzing the cycloaddition of propylene oxide with CO2 (Yield>98.5%, TOF: 612.9-761.1 h-1). © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Three-dimensional macroporous carbon/hierarchical Co3O4 nanoclusters for nonenzymatic electrochemical glucose sensor

    Science.gov (United States)

    Wang, Li; Zhang, Yayun; Xie, Yingzhen; Yu, Jie; Yang, Han; Miao, Longfei; Song, Yonghai

    2017-04-01

    A novel supporting material named as three-dimensional kenaf stem-derived carbon (3D-KSCs) was used to load hierarchical Co3O4 nanoclusters for electrochemical sensing glucose. The 3D-KSCs/hierarchical Co3O4 nanoclusters were constructed by two steps. Los of acicular precursor nanoclusters firstly grew on the channels of 3D-KSCs densely by hydrothermal method and then the as-prepared 3D-KSCs/hierarchical Co3O4 nanoclusters was obtained by thermal pyrolysis of the 3D-KSCs/precursors nanocomposites at 400 °C. The 3D macroporous configuration of 3D-KSCs resulted in lots of hierarchical Co3O4 nanoclusters arrayed on the surface of 3D-KSCs owing to its large enough specific surface area, which effectively avoided their aggregations and improved the stability of nanocomposites. The obtained 3D-KSCs/hierarchical Co3O4 nanoclusters showed a large number of needle-shaped and layered Co3O4 nanoclusters uniformly grew on the macropore's walls of 3D-KSC. Due to its unique nanostructures, the 3D-KSCs/hierarchical Co3O4 nanoclusters integrated electrode showed superior performance for nonenzymatic electrochemical glucose sensing, showing wide linear range (0.088-7.0 mM) and low detection limit of 26 μM. It might be a new strategy to prepare nanostructures on 3D-KSC for future applications.

  14. Macroporous silicon templated from silicon nanocrystallite and functionalized Si-H reactive group for grafting organic monolayer.

    Science.gov (United States)

    Guo, Dong-Jie; Wang, Jing; Tan, Wei; Xiao, Shou-Jun; Dai, Zhen-Dong

    2009-08-15

    This paper reports the development of a new fabrication process for highly porous and highly functional macroporous silicon (m-PSi). This new fabrication process involves two steps of electrochemical etching and one step of sonication detachment, and it uses silicon nanocrystallites as a template to form a honeycomb-like macroporous structure. The surface fabricated by this process has been characterized in comparison with the m-PSi surface fabricated by a one-step etching process. Scanning electron microscopy (SEM) images show that both m-PSi surfaces have nearly similar pore diameters (1-2 microm), but their porous microstructures are very different: the surface fabricated by two-step etching exhibits a smooth and shallow pore structure, while the other surface exhibits a rough and deep pore structure. Fourier transform infrared spectroscopy (FTIR) analyses reveal that the former is functionalized with a reactive Si-H group, while the latter is functionalized with a stable Si-O-Si group. To evaluate the Si-H reactive group, an allyl polyethylene glycol (PEG) is employed to modify the surface through hydrosilylation. SEM, FTIR, X-ray photoelectron spectroscopy, and water contact angle measurements are used to characterize the PEG-grafted m-PSi surface. PEG-grafted m-PSi substrates may have wide applications in biosensors, chemosensors, and biochips.

  15. Preparative purification of morroniside and loganin from Fructus corni by combination of macroporous absorption resin and HSCCC.

    Science.gov (United States)

    Liu, Liangpo; Sun, Ailing; Wu, Sujuan; Liu, Renmin

    2009-01-01

    A method for preparative purification of loganin and morroniside from Fructus corni was established by combination of macroporous absorption resin column separation and high-speed counter-current chromatography (HSCCC). The crude extracts obtained from Fructus corni by ultrasonic extraction with 50% methanol were subjected to separation on a macroporous resin column and then eluted with 15% and 40% ethanol, respectively. A fraction of 40% ethanol was used as the sample for separation of morroniside and loganin by HSCCC. The two-phase solvent system used for HSCCC separation was n-butanol-methanol-1% acetic acid water (4:1:6, v/v). The upper phase was used as the stationary phase of HSCCC. Morroniside (28.7 mg) of 97.8% purity and loganin (11.5 mg) of 98.6% purity were obtained in a one-step HSCCC separation from 50 mg of sample. The structures of morroniside and loganin were identified by 1H-NMR and 13C-NMR.

  16. Direct observation of the spatial distribution of samarium ions in alumina-silica macroporous monoliths by laser scanning confocal microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Murai, Shunsuke [Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Nishikyo-ku, Kyoto 615-8510 (Japan); Fujita, Koji [Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Nishikyo-ku, Kyoto 615-8510 (Japan)]. E-mail: fujita@sung7.kuic.kyoto-u.ac.jp; Nakanishi, Kazuki [Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Nishikyo-ku, Kyoto 615-8510 (Japan); Hirao, Kazuyuki [Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Nishikyo-ku, Kyoto 615-8510 (Japan)

    2006-02-09

    We have investigated the spatial distribution of Sm{sup 2+} inside macroporous alumina-silica (Al{sub 2}O{sub 3}-SiO{sub 2}) glasses having three-dimensionally interconnected skeletons. The Sm{sup 2+}-doped Al{sub 2}O{sub 3}-SiO{sub 2} glasses are prepared via an alkoxy-derived sol-gel route in the presence of poly (ethylene oxide) and SmCl{sub 3}.6H{sub 2}O. The well-defined macroporous morphology is obtained by the concurrence of the phase separation and the sol-gel transition. The reduction of Sm{sup 3+} to Sm{sup 2+} is accomplished by heat treatment under a reducing atmosphere. Two-dimensional images of the fluorescence due to the 4f-4f transition of Sm{sup 2+} with the aid of a laser scanning confocal microscope reveal the spatially uniform dispersion of Sm{sup 2+} inside the Al{sub 2}O{sub 3}-SiO{sub 2} skeleton.

  17. Surface Modification of Macroporous Matrix for Immobilization of Lipase for Fructose Oleic Ester Synthesis

    Directory of Open Access Journals (Sweden)

    Hani Hilmanto

    2016-10-01

    Full Text Available The objective of this research was to modify the matrix surfaces to obtain both hydrophobic matrix (HM and hydrophilic-hydrophobic matrix (HHM for enzymatic synthesis of fructose oleic ester (FOE. The modification was performed by the attachment of 2-phenylpropionaldehyde (PPA and PPA followed by polyethyleneimine (PEI for HM and HHM, respectively. The results from FT-IR analysis showed that the peak of stretching vibration of NH2 bond decreased and it was followed by an increase of the peak vibration of –C=N– bond at wave number 1667 cm-1. The peak of bending vibrations of the C=C bond also increased. It indicated that PPA was successfully attached on matrix. For HHM, an increase in the peak area of NH2 bond indicated that PEI was also successfully attached on the matrix. The optimum conditions of lipase adsorption were obtained at buffer pH 7 containing 0.5 M NaCl (9.27 mg protein/g matrix and without NaCl (9.23 mg protein/g matrix for HM and HHM, respectively. For FOE synthesis, the best immobilized lipase concentration was about 8% and 6% for HM and HHM, respectively. The optimum time of esterification was 24 h and 18 h for HM and HHM, respectively, in which the yields were 75.96% and 85.29%, respectively. The immobilized lipase could be used up to 3 cycles of esterification reaction. Copyright © 2016 BCREC GROUP. All rights reserved Received: 21st December 2015; Revised: 23rd February 2016; Accepted: 14th April 2016 How to Cite: Hilmanto, H., Hidayat, C., Hastuti, P. (2016. Surface Modification of Macroporous Matrix for Immobilization of Lipase for Fructose Oleic Ester Synthesis. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (3: 339-345 (doi:10.9767/bcrec.11.3.573.339-345 Permalink/DOI: http://doi.org/10.9767/bcrec.11.3.573.339-345

  18. SYNTESIS OF THE COMPLEXES OF MACROPOROUS SULFONATED RESINS WITH FERRIC CHLORIDE AND THEIR CATALYTIC BEHAVIOR FOR SETERIFICATION OF ACETIC ACID WITH BUTANOL

    Institute of Scientific and Technical Information of China (English)

    HuangWenqiang; HouXin; 等

    1997-01-01

    The complex resins prepared from macroporous sulfonated resin D72(H+ form) with ferric chloride or ferric chloride hexahydrate have both sites of Bronsted acid and Lewis acid.In the catalysis of exterification of acetic acid with butanol the complex resins show to have much higher catalytic activity than that of its matrix.a conventional sulfonated cation exchange resin D72.

  19. A facile photo-induced synthesis of COOH functionalized meso-macroporous carbon films and their excellent sensing capability for aromatic amines.

    Science.gov (United States)

    Jia, Lichao; Mane, Gurudas P; Anand, Chokkalingam; Dhawale, Dattatray S; Ji, Qingmin; Ariga, Katsuhiko; Vinu, Ajayan

    2012-09-18

    A simple photo-induced approach is developed for the preparation of COOH functionalized meso-macroporous carbon films with tunable pores without using any inorganic mesoporous silica templates, which show excellent sensing selectivity for aniline and the selectivity can be enhanced upon increasing COOH functional groups.

  20. Facile synthesis of radial-like macroporous superparamagnetic chitosan spheres with in-situ co-precipitation and gelation of ferro-gels.

    Directory of Open Access Journals (Sweden)

    Chih-Hui Yang

    Full Text Available Macroporous chitosan spheres encapsulating superparamagnetic iron oxide nanoparticles were synthesized by a facile and effective one-step fabrication process. Ferro-gels containing ferrous cations, ferric cations and chitosan were dropped into a sodium hydroxide solution through a syringe pump. In addition, a sodium hydroxide solution was employed for both gelation (chitosan and co-precipitation (ferrous cations and ferric cations of the ferro-gels. The results showed that the in-situ co-precipitation of ferro-ions gave rise to a radial morphology with non-spheroid macro pores (large cavities inside the chitosan spheres. The particle size of iron oxide can be adjusted from 2.5 nm to 5.4 nm by tuning the concentration of the sodium hydroxide solution. Using Fourier Transform Infrared Spectroscopy and X-ray diffraction spectra, the synthesized nanoparticles were illustrated as Fe(3O(4 nanoparticles. In addition, the prepared macroporous chitosan spheres presented a super-paramagnetic behaviour at room temperature with a saturation magnetization value as high as ca. 18 emu/g. The cytotoxicity was estimated using cell viability by incubating doses (0∼1000 µg/mL of the macroporous chitosan spheres. The result showed good viability (above 80% with alginate chitosan particles below 1000 µg/mL, indicating that macroporous chitosan spheres were potentially useful for biomedical applications in the future.

  1. Composite inorganic membranes containing nanoparticles of hydrated zirconium dioxide for electrodialytic separation

    OpenAIRE

    Dzyazko, Yuliya S; Volfkovich, Yurii M; Sosenkin, Valentin E; Nikolskaya, Nadejda F; Gomza, Yurii P

    2014-01-01

    The aim of the work was to elucidate the nature of charge-selective properties of macroporous composite inorganic membranes modified with nanoparticles of hydrated zirconium dioxide. The membranes have been investigated using methods of standard contact porosimetry, potentiometry, electron microscopy and small-angle X-ray scattering. The ion exchanger has been found to deposit inside pores of ceramics. Differential curves of pore volume distribution have been resolved using Lorentz functions;...

  2. Use of macroporous gelatine spheres as a biodegradable scaffold for guided tissue regeneration of healthy dermis in humans: an in vivo study.

    Science.gov (United States)

    Huss, Fredrik R M; Nyman, Erika; Bolin, Johanna S C; Kratz, Gunnar

    2010-05-01

    If a biodegradable scaffold is applied, the dermis can be regenerated by guided tissue regeneration. Scaffolds can stimulate in-growth of cells from the surroundings that migrate into them and start to produce autologous extracellular matrix as the scaffold is degraded. Several materials are available, but most of them are in the form of sheets and need to be laid on an open wound surface. A number of injectable fillers have been developed to correct soft-tissue defects. However, none of these has been used for guided tissue regeneration. We present a new technique that could possibly be used to correct dermal defects by using macroporous gelatine spheres as a biodegradable scaffold for guided tissue regeneration. In eight healthy volunteers, intradermal injections of macroporous gelatine spheres were compared with injections of saline and hyaluronic acid (Restylane). Full-thickness skin biopsy specimens of the implants and surrounding tissue were removed 2, 8, 12 and 26 weeks after injection, and the (immuno)histological results were analysed. The Restylane merely occupied space. It shattered the dermal tissue and compressed collagen fibres and cells at the interface between the implant and the dermis. No regeneration of tissue was found with this material at any time. The macroporous gelatine spheres were populated with fibroblasts already after 2 weeks. After 8 weeks the spheres were completely populated by fibroblasts producing dermal tissue. After 12 and 26 weeks, the gelatine spheres had been more or less completely resorbed and replaced by vascularised neodermis. There were no signs of capsular formation, rejection or adverse events in any subject. Further in vivo studies in humans are needed to evaluate the effect of the macroporous spheres fully as a matrix for guided tissue regeneration with and without cellular pre-seeding. However, the results of this study indicate the possibility of using macroporous gelatine spheres as an injectable, three

  3. Degradation behavior and compatibility of micro, nanoHA/chitosan scaffolds with interconnected spherical macropores.

    Science.gov (United States)

    Ruixin, Li; Cheng, Xu; Yingjie, Liu; Hao, Li; Caihong, Shi; Weihua, Su; Weining, An; Yinghai, Yuan; Xiaoli, Qin; Yunqiang, Xu; Xizheng, Zhang; Hui, Li

    2017-03-30

    Hydroxyapatite/Chitosan (HA/CS) composite have significant application in biomedical especially for bone replacement. Inorganic particle shape and size of composite affect the scaffold mechanical property, biological property, and degradation. The aim of this study was to fabricate HA/CS scaffold with good pore connectivity and analyze their biological, degradation properties. Microhydroxyapatite/chitosan(mHA/CS) and nanohydroxyapatite/chitosan (nHA/CS) composite scaffolds with interconnected spherical pore architectures were fabricated. Composite scaffolds structure parameters were analyzed using micro CT. Cell proliferation and morphology were tested and compared between two scaffolds using mouse osteoblastic cell line MC3T3-E1. To research the composite degradation in lysozyme PBS solution, degradation rate and reducing sugar content were tested, and scaffolds morphology were observed by SEM. The results showed that microHA and nanoHA were fabricated by being calcined and synthesis methods, and their infrared spectra are very similar. EDAX composition analysis demonstrated that both of microHA and nanoHA were calcium deficiency HA. Micro-CT results demonstrated the scaffolds had interconnected spherical pores, and the structure parameters were similar. Cell viabilities were significant increased with cultured time, but there were no significant difference between microHA/CS and nanoHA/CS scaffolds. Scaffold structure was gradually destroyed and inorganic composition HA particles are more prominent with degradation time.

  4. Study of the structure of 3D-ordered macroporous GaN-ZnS:Mn nanocomposite films

    Energy Technology Data Exchange (ETDEWEB)

    Kurdyukov, D. A., E-mail: kurd@gvg.ioffe.ru; Shishkin, I. I.; Grudinkin, S. A.; Sitnikova, A. A.; Zamoryanskaya, M. V.; Golubev, V. G. [Russian Academy of Sciences, Ioffe Physical-Technical Institute (Russian Federation)

    2015-05-15

    A film-type 3D-ordered macroporous GaN-ZnS:Mn nanocomposite with the structure of an inverted opal is fabricated. Structural studies of the nanocomposite are performed, and it is shown that GaN and ZnS:Mn introduced into the pores of the silica opal are nanocrystallites misoriented with respect to each other. It is shown that the nanocomposite is a structurally perfect 3D photonic crystal. The efficiency of using a buffer of GaN crystallites to preclude interaction between the surface of the spherical a-SiO{sub 2} particles forming the opal matrix and chemically active substances introduced into the pores is demonstrated.

  5. Preparative separation and purification of Rebaudioside A from Stevia rebaudiana Bertoni crude extracts by mixed bed of macroporous adsorption resins.

    Science.gov (United States)

    Li, Jie; Chen, Zhenbin; Di, Duolong

    2012-05-01

    The separation and purification of Rebaudioside A (RA) from Stevia rebaudiana Bertoni crude extracts (Steviosides) by macroporous adsorption resin (MAR) mixed bed were systematically investigated. MAR mixed bed of HPD750-LSA40-LSA30-DS401 was selected due to its better separation degree. Based on the kinetics/thermodynamics experiment of the mixed bed, it was found that the experimental data fitted better to the pseudo-second-order model, and intra-particle diffusion was rate-limiting step. The adsorption isotherm was consistent with IV equilibrium adsorption isotherm classified by Brunauer. Furthermore, the influencing factors for the separation of RA based on HPLC were also investigated. Under the optimal conditions, the separation degree for RA (DAS) increased from 0.771 to 1.54. Moreover, the experimental results showed that the purity of the obtained product increased from 60% to 97%.

  6. THERMODYNAMIC STUDY ON ADSORPTION OF AROMATIC SULFONIC ACIDS ONTO MACROPOROUS WEAK BASE ANION EXCHANGER FROM AQUEOUS SOLUTIONS

    Institute of Scientific and Technical Information of China (English)

    Chao Long; Quan-xing Zhang; Ai-min Li; Jin-long Chen

    2004-01-01

    The adsorption equilibrium isotherms of three aromatic sulfonic acid compounds, 2-naphthalenesulfonic acid, ptoluenesulfonic acid and p-chlorobenzenesulfonic acid, from aqueous solutions by macroporous weak base anion exchanger within the temperature range of 293 K-313 K were obtained. Several isotherm equations were correlated with the equilibrium data, and the experimental data was found to fit the three-parameter Redlich-Peterson equation best within the entire range of concentrations. The study showed that the hydrophobicity of solute has distinct influence on adsorption capacity of the anion exchanger for the aromatic sulfonic acid. Moreover, estimations of the isosteric enthalpy, free energy,and entropy change of adsorption were also reported. The positive isosteric enthalpy and entropy change for adsorption indicate an endothermic and entropy driven process in the present study.

  7. Removal of chloramphenicol by macroporous adsorption resins in honey: a novel approach on reutilization of antibiotics contaminated honey.

    Science.gov (United States)

    Cheng, Ni; Gao, Hui; Deng, Jianjun; Wang, Bini; Xu, Ruihan; Cao, Wei

    2012-09-01

    The effects of different steps in honey production on chloramphenicol (CAP) levels and CAP removal from honey using macroporous adsorption resins (MARs) were investigated in this study. CAP residues in honey were quantified by enzyme-linked immunosorbent assay after each processing step including preheating, filtration, vacuum concentration and pasteurization. Vacuum concentration contributes the most reduction of CAP level (9.9%). Meanwhile, 5 types of MARs (including LSI-1, LSI-2, LSI-3, LS-803, and LS-903) were used in CAP adsorption. The results showed that LS-803 resin had higher adsorption rate of 86% than other resins in removing CAP from honey, and its optimal adsorption time and temperature were 40 min and 55 °C, respectively. The treated honey could be used as feed additive or biomass energy. Therefore, it would be a novel approach to reutilization of antibiotics contaminated honey.

  8. Three-dimensionally ordered macro-porous Pt/TiO2 catalyst used for water-gas shift reaction

    Institute of Scientific and Technical Information of China (English)

    Hao Liang; Yuan Zhang; Yuan Liu

    2008-01-01

    Three-dimensionally ordered macro-porous (3DOM) Pt/TiO2 catalysts were prepared by template and impregna-tion methods, and the resultant samples were characterized by using TG-DTA, XRD, SEM, TEM, and TPR techniques. The catalytic performance for water-gas shift (WGS) reaction was tested, and the influences of some conditions, such as reduction temperature of catalysts, the amount of Pt loadings and space velocity on catalytic performance were investigated. It was shown that Pt particles were homogeneously dispersed on 3DOM TiO2. The reduction of TiO2 surface was important for the catalyticperformance. The activity test results showed that the 3DOM Pt/TiO2 catalysts exhibited very good catalytic performance for WGS reaction even at high space velocity, which was owing to the better mass transfer of 3DOM porous structure besides the high intrinsic activity of Pt/TiO2.

  9. Cm-scale Heterogeneity in Degradation - Potential Impact on Leaching of MCPA through a Variably-Saturated Macroporous Clayey Till

    Science.gov (United States)

    Rosenbom, A. E.; Johnsen, A. R.; Aamand, J.; Binning, P. J.; Dechesne, A.; Smets, B. F.; "Cream-Spatial Heterogeneity"-Team

    2011-12-01

    Recent research has revealed a large variation in pesticide mineralization potentials, but little is known about the scale at which these heterogeneities impact the spreading of contaminants. A modeling study aiming at quantifying how heterogeneous degradation potentials in agricultural soil will affect MCPA degradation and leaching was conducted. 2D-distributions (96-well micro plate mineralization assay) of the mineralization potentials of phenoxy acid herbicides (MCPA, 2,4-D) representing layers in the upper meter of variably-saturated clayey till were applied. The rapid mineralization measured was represented by Monod mineralization kinetics, whereas the rest were either represented by slow 0-order mineralization kinetics or no degradation. Five 3D-modelling scenarios were set up using the COMSOL Multiphysics 4.1 toolbox (COMSOL Inc., Burlington, MA, USA): 1) simple matrix flow of water with no biodegradation of the MCPA at all nodes; 2) preferential flow (including a wormhole) of water with no biodegradation of the MCPA at all nodes; 3) simple matrix flow of water with average biodegradation of the MCPA at all nodes, which corresponds to results derived from a conventional homogenized soil sample; 4) simple matrix flow of water with the observed high variation in biodegradation of the MCPA corresponding to random variation in degradation; and 5) vertical structure in water flow combined with vertically structured degradation (defined hot spots and cold spots), which corresponds to a situation where both flow and degradation are associated with macropores/wormholes. Results show that cm-scale heterogeneity in degradation potential with simple matrix flow has a negligible effect on MCPA leaching at one meter below soil surface. By introducing a wormhole in the low-permeable 3D-soil modeling domain, however, the risk of MCPA-leaching below one meter depth increase drastically with low degradation potential along the wall of macropores/wormholes.

  10. A novel Pd/silicalite-1 composite membrane for hydrogen separation

    Institute of Scientific and Technical Information of China (English)

    XIAO Wei; YANG JianHua; WANG JinQu

    2009-01-01

    A novel Pd/silicalite-1 composite membrane supported on the macroporous tubular stainless steel substrate was successfully fabricated by electroless plating at 303 K. The structure, morphology and gaseous permeability of the membrane were detected by X-ray diffractiometry (XRD), scanning electron microscopy (SEM) and single-gas permeation test, respectively. Results confirm the formation of a thin,smooth, and continuous Pd/silicalite-1 composite membrane. The obtained composite membrane at 773 K, at 0.1 MPa pressure drop, suggesting the potential application for H2 separation.

  11. Experimental study on the osseointegration of foam TiC/Ti composites.

    Science.gov (United States)

    Jingyu, Wang; Lin, Wu; Yong, Gao; Jinsong, Zhang; Cuicui, Zhang

    2013-08-01

    Macroporous ceramics have demonstrated osteoconductive properties because of their biocompatibility and 3D macroporous structure, and these materials have recently been widely studied as bone replacement materials. The foam TiC/Ti composites discussed in this study have good mechanical properties, balancing out metallic toughness and ceramic strength. Furthermore, because of the high porosity and pore connectivity of these TiC/Ti composites, they have the potential to be a new bone replacement material. The purpose of this study was to evaluate the osseointegration of foam TiC/Ti composites, preliminarily discuss the TiC/Ti ossification mechanism, and to obtain reliable data on the use of foam TiC/Ti composites as bone replacement materials. The foam TiC/Ti composites were sited in 40 Japanese white rabbits for 4, 8, 12 and 24 weeks. The foam TiC/Ti composites were compared to foam SiC. M-CT (micro-computed tomography) analysis, histological analysis, SEM (scanning electron microscopy) observation and EDS (energy-dispersive x-ray spectrometer) analysis were conducted to estimate the osseointegration of the materials. The histological observations and quantitative analysis exhibited significantly more ossification area (volume), trabeculae maturity, and calcium and phosphorus content in the foam TiC/Ti composites compared to the foam SiC (p TiC/Ti composites possess good osseointegration capacity and have the potential to be a new bone replacement material.

  12. STUDY ON THE IMMOBILIZATION OF PAPAIN WITH A MACROPOROUS BEAD CARRIER OF COPOLYMER CONTAINING MONOMER UNITS OF N-AMINOETHYL ACRYLAMIDE AND VINYL ALCOHOL

    Institute of Scientific and Technical Information of China (English)

    Yan-feng Li; Jun-rong Li; Lian-di Fu; Yao-zeng Li

    2000-01-01

    A kind of macroporous bead carrier of copolymer containing monomer units ofN-aminoethyl acrylamide and vinyl alcohol was synthesized, i.e. the MR-AA carrier. Papain was immobilized on the carrier using glutaraldehyde as the coupling agent. The enzymatic activity of the immobilized papain was compared with free papain using casein as a substrate, and the effects of glutaraldehyde concentration, pH, temperature, time and papain amount added on the activity recovery were also investigated. The results show that the MR-AA carrier contains reactive primary amine groups, hydrophilic amido links and hydroxyl groups, as well as macroporous structures based on its matrix (MR-AV matrix), furthermore, the activity recovery of papain in the immobilization could reach 48%~58%. In comparison with free papain, the resulting immobilized papain exhibits a remarkable thermostability and better reusability.

  13. Analysis of Flavonoids in Lotus (Nelumbo nucifera) Leaves and Their Antioxidant Activity Using Macroporous Resin Chromatography Coupled with LC-MS/MS and Antioxidant Biochemical Assays.

    Science.gov (United States)

    Zhu, Ming-Zhi; Wu, Wei; Jiao, Li-Li; Yang, Ping-Fang; Guo, Ming-Quan

    2015-06-08

    Lotus (Nelumbo nucifera) leaves, a traditional Chinese medicinal herb, are rich in flavonoids. In an effort to thoroughly analyze their flavonoid components, macroporous resin chromatography coupled with HPLC-MS/MS was employed to simultaneously enrich and identify flavonoids from lotus leaves. Flavonoids extracted from lotus leaves were selectively enriched in the macroporous resin column, eluted subsequently as fraction II, and successively subjected to analysis with the HPLC-MS/MS and bioactivity assays. Altogether, fourteen flavonoids were identified, four of which were identified from lotus leaves for the first time, including quercetin 3-O-rhamnopyranosyl-(1→2)-glucopyranoside, quercetin 3-O-arabinoside, diosmetin 7-O-hexose, and isorhamnetin 3-O-arabino- pyranosyl-(1→2)-glucopyranoside. Further bioactivity assays revealed that these flavonoids from lotus leaves possess strong antioxidant activity, and demonstrate very good potential to be explored as food supplements or even pharmaceutical products to improve human health.

  14. Amine-tethered adsorbents based on three-dimensional macroporous silica for CO(2) capture from simulated flue gas and air.

    Science.gov (United States)

    Liu, Fa-Qian; Wang, Lei; Huang, Zhao-Ge; Li, Chao-Qin; Li, Wei; Li, Rong-Xun; Li, Wei-Hua

    2014-03-26

    New covalently tethered CO2 adsorbents are synthesized through the in situ polymerization of N-carboxyanhydride (NCA) of l-alanine from amine-functionalized three-dimensional (3D) interconnected macroporous silica (MPS). The interconnected macropores provide low-resistant pathways for the diffusion of CO2 molecules, while the abundant mesopores ensure the high pore volume. The adsorbents exhibit high molecular weight (of up to 13058 Da), high amine loading (more than 10.98 mmol N g(-1)), fast CO2 capture kinetics (t1/2 CO2 g(-1) in simulated flue gas and 2.65 mmol CO2 g(-1) in simulated ambient air under 1 atm of dry CO2), as well as good stability over 120 adsorption-desorption cycles, which allows the overall CO2 capture process to be promising and sustainable.

  15. Analysis of Flavonoids in Lotus (Nelumbo nucifera Leaves and Their Antioxidant Activity Using Macroporous Resin Chromatography Coupled with LC-MS/MS and Antioxidant Biochemical Assays

    Directory of Open Access Journals (Sweden)

    Ming-Zhi Zhu

    2015-06-01

    Full Text Available Lotus (Nelumbo nucifera leaves, a traditional Chinese medicinal herb, are rich in flavonoids. In an effort to thoroughly analyze their flavonoid components, macroporous resin chromatography coupled with HPLC-MS/MS was employed to simultaneously enrich and identify flavonoids from lotus leaves. Flavonoids extracted from lotus leaves were selectively enriched in the macroporous resin column, eluted subsequently as fraction II, and successively subjected to analysis with the HPLC-MS/MS and bioactivity assays. Altogether, fourteen flavonoids were identified, four of which were identified from lotus leaves for the first time, including quercetin 3-O-rhamnopyranosyl-(1→2-glucopyranoside, quercetin 3-O-arabinoside, diosmetin 7-O-hexose, and isorhamnetin 3-O-arabino- pyranosyl-(1→2-glucopyranoside. Further bioactivity assays revealed that these flavonoids from lotus leaves possess strong antioxidant activity, and demonstrate very good potential to be explored as food supplements or even pharmaceutical products to improve human health.

  16. Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores.

    Science.gov (United States)

    Zhu, Cheng; Liu, Tianyu; Qian, Fang; Han, T Yong-Jin; Duoss, Eric B; Kuntz, Joshua D; Spadaccini, Christopher M; Worsley, Marcus A; Li, Yat

    2016-06-08

    Graphene is an atomically thin, two-dimensional (2D) carbon material that offers a unique combination of low density, exceptional mechanical properties, thermal stability, large surface area, and excellent electrical conductivity. Recent progress has resulted in macro-assemblies of graphene, such as bulk graphene aerogels for a variety of applications. However, these three-dimensional (3D) graphenes exhibit physicochemical property attenuation compared to their 2D building blocks because of one-fold composition and tortuous, stochastic porous networks. These limitations can be offset by developing a graphene composite material with an engineered porous architecture. Here, we report the fabrication of 3D periodic graphene composite aerogel microlattices for supercapacitor applications, via a 3D printing technique known as direct-ink writing. The key factor in developing these novel aerogels is creating an extrudable graphene oxide-based composite ink and modifying the 3D printing method to accommodate aerogel processing. The 3D-printed graphene composite aerogel (3D-GCA) electrodes are lightweight, highly conductive, and exhibit excellent electrochemical properties. In particular, the supercapacitors using these 3D-GCA electrodes with thicknesses on the order of millimeters display exceptional capacitive retention (ca. 90% from 0.5 to 10 A·g(-1)) and power densities (>4 kW·kg(-1)) that equal or exceed those of reported devices made with electrodes 10-100 times thinner. This work provides an example of how 3D-printed materials, such as graphene aerogels, can significantly expand the design space for fabricating high-performance and fully integrable energy storage devices optimized for a broad range of applications.

  17. Effects of Architecture and Surface Chemistry of Three-Dimensionally Ordered Macroporous Carbon Solid Contacts on Performance of Ion-Selective Electrodes

    OpenAIRE

    2010-01-01

    The effects of the architecture and surface chemistry of three-dimensionally ordered macroporous (3DOM) carbon solid contacts on the properties of ion-selective electrodes (ISEs) were examined. Infiltration of the plasticized PVC membrane into the pores of the carbon created a large interfacial area between the sensing membrane and the solid contact, as shown by cryo-SEM and elemental analysis. This large interfacial area, along with the high capacitance of the 3DOM carbon solid contacts (as ...

  18. Microstructure and Mechanical Properties of Calcium Phosphate Cement/Gelatine Composite Scaffold with Oriented Pore Structure for Bone Tissue Engineering

    Institute of Scientific and Technical Information of China (English)

    QI Xiaopeng; HE Fupo; YE Jiandong

    2012-01-01

    The macroporous calcium phosphate(CPC) cement with oriented pore structure was prepared by freeze casting.SEM observation showed that the macropores in the porous calcium phosphate cement were interconnected aligned along the ice growth direction.The porosity of the as-prepared porous CPC was measured to be 87.6% by Archimede's principle.XRD patterns of specimens showed that poorly crystallized hydroxyapatite was the main phase present in the hydrated porous calcium phosphate cement.To improve the mechanical properties of the CPC scaffold,the 15% gelatine solution was infiltrated into the pores under vacuum and then the samples were freeze dried to form the CPC/gelatine composite scaffolds.After reinforced with gelatine,the compressive strength of CPC/gelatine composite increased to 5.12 MPa,around fifty times greater than that of the unreinforced macroporous CPC scaffold,which was only 0.1 MPa.And the toughness of the scaffold has been greatly improved via the gelatine reinforcement with a much greater fracture strain.SEM examination of the specimens indicated good bonding between the cement and gelatine.Participating the external load by the deformable gelatine,patching the defects of the CPC pores wall,and crack deflection were supposed to be the reinforcement mechanisms.In conclusion,the calcium phosphate cement/gelatine composite with oriented pore structure prepared in this work might be a potential scaffold for bone tissue engineering.

  19. An Efficient Protocol for Preparation of Gallic Acid from Terminalia bellirica (Gaertn.) Roxb by Combination of Macroporous Resin and Preparative High-Performance Liquid Chromatography.

    Science.gov (United States)

    Zou, Denglang; Chen, Tao; Chen, Chen; Li, Hongmei; Liu, Yongling; Li, Yulin

    2016-08-01

    In this article, macroporous resin column chromatography and preparative high-performance liquid chromatography were applied for preparation of gallic acid from Terminalia bellirica (Gaertn.) Roxb. In the first step, six kinds of resins were investigated by adsorption and desorption tests and AB-8 macroporous resin was selected for the enrichment of gallic acid. As a result, 20 g of gallic acid at a purity of 71% could be separated from 100 g of crude extract in which the content of gallic acid was 16.7% and the recovery of gallic acid reached 85.0%. In the second step, preparative high-performance liquid chromatography was selected to purify gallic acid. As a result, 640 mg of gallic acid at a purity of 99.1% was obtained from 1 g of sample in 35 min. The results demonstrated that macroporous resin coupled with preparative high-performance liquid chromatography was suitable for preparation of gallic acid from T. bellirica (Gaertn.) Roxb.

  20. Macroporous gelatine spheres as culture substrate, transplantation vehicle, and biodegradable scaffold for guided regeneration of soft tissues. In vivo study in nude mice.

    Science.gov (United States)

    Huss, Fredrik R M; Junker, Johan P E; Johnson, Hans; Kratz, Gunnar

    2007-01-01

    In the course of development of a new type of filler for the correction of small defects in soft tissues we studied macroporous gelatine spheres as culture substrate, transplantation vehicle, and biodegradable scaffold for guided regeneration of soft tissues in vivo. We injected intradermally in nude mice gelatine spheres that had either been preseeded with human fibroblasts or preadipocytes, or left unseeded. We compared the extent of regenerated tissue with that found after injections of saline or single-cell suspensions of human fibroblasts or preadipocytes. Routine histological examinations and immunohistochemical staining for von Willebrand factor (indicating neoangiogenesis) were made after 7, 21, and 56 days. Injected saline or single-cell suspensions had no effect. However, a quick and thorough tissue regeneration with developing neoangiogenesis was elicited by the gelatine spheres and the effect of spheres preseeded with preadipocytes surpassed the effect of spheres preseeded with fibroblasts, which in turn surpassed the effect of unseeded gelatine spheres. We suggest that minor soft tissue defects such as wrinkles or creases can be corrected by injection of naked macroporous gelatine spheres, whereas larger defects are best corrected by injection of macroporous gelatine spheres preseeded with fibroblasts, or preadipocytes, or both.

  1. Ceria modified three-dimensionally ordered macro-porous Pt/TiO2 catalysts for water-gas shift reaction

    Institute of Scientific and Technical Information of China (English)

    LIANG Hao; ZHANG Yuan; LIU Yuan

    2009-01-01

    Three-dimensionally ordered macro-porous(3DOM) TiO2 and ceria-modified 3DOM TiO2 supported platinum catalysts were pre-pared with template and impregnation methods, and the resultant samples were characterized by scanning electron microscopy(SEM), X-ray dif-fractometer(XRD), high-resolution transmission electron microscopy(HRTEM) and texture programmed reduction(TPR) techniques. The catalytic performances over the platinum-based catalysts were investigated for water-gas shift (WGS) reaction in a wide temperature range macro-porous catalyst, owing to the macro-porous structure favoring mass uansfer. Addition of ceria into 3DOM Pt/TiO2 led to improvement of catalytic activity. TPR and HRTEM results showed that the interaction existed between ceria and titanium oxide and addition of ceria promoted the reducibility of platinum oxide and TiO2 on the interface of platinum and TiO2 particles, which contributed to high activity of the ceria modi-fied catalysts. The results indicated that ceria-modified 3DOM Pt/TiO2 was a promising candidate of fuel cell oriented WGS catalyst.

  2. Enhanced Efficiency of Dye-Sensitized Solar Cells with Mesoporous-Macroporous TiO2 Photoanode Obtained Using ZnO Template

    Science.gov (United States)

    Pham, Trang T. T.; Mathews, Nripan; Lam, Yeng-Ming; Mhaisalkar, Subodh

    2017-06-01

    Improved light harvesting efficiency can be achieved by enhancing the optical properties of the titanium dioxide (TiO2) photoanode in dye-sensitized solar cells (DSSCs), leading to higher power conversion efficiency. By incorporating submicrometer cavities in TiO2 mesoporous film, using zinc oxide (ZnO) particles as a template, a bimodal pore size structure has been created, called a mesoporous-macroporous nanostructure. This photoanode structure consists of 20-nm TiO2 nanoparticles with two kinds of pores with size of 20 nm (mesopores) and 500 nm (macropores). Energy-dispersive x-ray spectroscopy and x-ray diffraction studies showed no trace of ZnO in the TiO2 after removal by TiCl4 treatment. Higher diffuse transmittance of this film compared with the standard transparent photoanode provides evidence of improved light scattering. When employed in a device, the incident-photon-to-current efficiency of ZnO-assisted devices showed enhancement at longer wavelengths, corresponding to the Mie light scattering effect with the macropores as scattering centers. This resulted in overall higher power conversion efficiency of the DSSC. In this work, a nonvolatile gel ionic liquid was used as the electrolyte to also demonstrate the benefit of this structure in combination with a viscous electrolyte and its promising application to prolong the stability of DSSCs.

  3. Novel three-dimensionally ordered macroporous Fe3+-doped TiO2 photocatalysts for H2 production and degradation applications

    Science.gov (United States)

    Yan, Xiaoqing; Xue, Chao; Yang, Bolun; Yang, Guidong

    2017-02-01

    Novel three-dimensionally ordered macroporous (3DOM) Fe3+-doped TiO2 photocatalysts were prepared using a colloidal crystal template method with low-cost raw material including ferric trichloride, isopropanol, tetrabutyl titanate and polymethyl methacrylate. The as-prepared 3DOM Fe3+-doped TiO2 photocatalysts were characterized by various analytical techniques. TEM and SEM results showed that the obtained photocatalysts possess well-ordered macroporous structure in three dimensional orientations. As proved by XPS and EDX analysis that Fe3+ ions have been introduced TiO2 lattice and the doped Fe3+ ions can act as the electron acceptor/donor centers to significantly enhance the electron transfer from the bulk to surface of TiO2, resulting in more electrons could take part in the oxygen reduction process thereby decreasing the recombination rate of photogenerated charges. Meanwhile, the 3DOM architecture with the feature of interfacial chemical reaction active sites and optical absorption active sites is remarkably favorable for the reactant transfer and light trapping in the photoreaction process. As a result, the 3DOM Fe3+-doped TiO2 photocatalysts show the considerably higher photocatalytic activity for decomposition of the Rhodamine B (RhB) and the generation of hydrogen under visible light irradiation due to the synergistic effects of open, interconnected macroporous network and metal ion doping.

  4. Acetylene Black Induced Heterogeneous Growth of Macroporous CoV2O6 Nanosheet for High-Rate Pseudocapacitive Lithium-Ion Battery Anode.

    Science.gov (United States)

    Zhang, Lei; Zhao, Kangning; Luo, Yanzhu; Dong, Yifan; Xu, Wangwang; Yan, Mengyu; Ren, Wenhao; Zhou, Liang; Qu, Longbing; Mai, Liqiang

    2016-03-23

    Metal vanadates suffer from fast capacity fading in lithium-ion batteries especially at a high rate. Pseudocapacitance, which is associated with surface or near-surface redox reactions, can provide fast charge/discharge capacity free from diffusion-controlled intercalation processes and is able to address the above issue. In this work, we report the synthesis of macroporous CoV2O6 nanosheets through a facile one-pot method via acetylene black induced heterogeneous growth. When applied as lithium-ion battery anode, the macroporous CoV2O6 nanosheets show typical features of pseudocapacitive behavior: (1) currents that are mostly linearly dependent on sweep rate and (2) redox peaks whose potentials do not shift significantly with sweep rate. The macroporous CoV2O6 nanosheets display a high reversible capacity of 702 mAh g(-1) at 200 mA g(-1), excellent cyclability with a capacity retention of 89% (against the second cycle) after 500 cycles at 500 mA g(-1), and high rate capability of 453 mAh g(-1) at 5000 mA g(-1). We believe that the introduction of pseudocapacitive properties in lithium battery is a promising direction for developing electrode materials with high-rate capability.

  5. Enhanced Efficiency of Dye-Sensitized Solar Cells with Mesoporous-Macroporous TiO2 Photoanode Obtained Using ZnO Template

    Science.gov (United States)

    Pham, Trang T. T.; Mathews, Nripan; Lam, Yeng-Ming; Mhaisalkar, Subodh

    2017-02-01

    Improved light harvesting efficiency can be achieved by enhancing the optical properties of the titanium dioxide (TiO2) photoanode in dye-sensitized solar cells (DSSCs), leading to higher power conversion efficiency. By incorporating submicrometer cavities in TiO2 mesoporous film, using zinc oxide (ZnO) particles as a template, a bimodal pore size structure has been created, called a mesoporous-macroporous nanostructure. This photoanode structure consists of 20-nm TiO2 nanoparticles with two kinds of pores with size of 20 nm (mesopores) and 500 nm (macropores). Energy-dispersive x-ray spectroscopy and x-ray diffraction studies showed no trace of ZnO in the TiO2 after removal by TiCl4 treatment. Higher diffuse transmittance of this film compared with the standard transparent photoanode provides evidence of improved light scattering. When employed in a device, the incident-photon-to-current efficiency of ZnO-assisted devices showed enhancement at longer wavelengths, corresponding to the Mie light scattering effect with the macropores as scattering centers. This resulted in overall higher power conversion efficiency of the DSSC. In this work, a nonvolatile gel ionic liquid was used as the electrolyte to also demonstrate the benefit of this structure in combination with a viscous electrolyte and its promising application to prolong the stability of DSSCs.

  6. Zirconia modified monolithic macroporous Pt/CeO2/Al2O3 catalyst used for water-gas shift reaction

    Institute of Scientific and Technical Information of China (English)

    LIANG Hao; YUAN Honggang; WEI Feng; ZHANG Xiwen; LIU Yuan

    2011-01-01

    Monolithic macroporous Pt/CeO2/Al2O3 and zirconia modified Pt/f eO2/Al2O3 catalysts Were prepared by using concentrated emulsions synthesis route.The catalytic performances over the platinum-based catalysts were investigated by water-gas shift (WGS) reaction in a wide temperature range (180-300 ℃).The samples were characterized with thermogravimetry (TG),X-ray diffraction (XRD),scanning electron microscopy (SEM),high resolution transmission electron microscopy (HRTEM) and temperature programmed reduction (TPR) techniques as well.The SEM and HRTEM results indicated that the monoliths possessed macroporosity,in size of 5-50 μm,and platinum particles were homogeneously dispersed on macroporous materials.XRD and TPR results showed that the interaction between ceria and zirconia oxide was formed and the addition of zirconia could promote the reducibility of platinum oxide on the interface of ceria and zirconia particles,which led to an improvement of catalytic activity in WGS reaction.The results indicated that zirconia modified monolithic macroporous Pt/CeO2/Al2O3 could be fabricated in small size (from millimeter lever to centimeter) and had good reaction activity,which was a potential new route for miniaturization of the WGS reactor.

  7. Study of Ni Metallization in Macroporous Si Using Wet Chemistry for Radio Frequency Cross-Talk Isolation in Mixed Signal Integrated Circuits

    Directory of Open Access Journals (Sweden)

    King-Ning Tu

    2011-05-01

    Full Text Available A highly conductive moat or Faraday cage of through-the-wafer thickness in Si substrate was proposed to be effective in shielding electromagnetic interference thereby reducing radio frequency (RF cross-talk in high performance mixed signal integrated circuits. Such a structure was realized by metallization of selected ultra-high-aspect-ratio macroporous regions that were electrochemically etched in p− Si substrates. The metallization process was conducted by means of wet chemistry in an alkaline aqueous solution containing Ni2+ without reducing agent. It is found that at elevated temperature during immersion, Ni2+ was rapidly reduced and deposited into macroporous Si and a conformal metallization of the macropore sidewalls was obtained in a way that the entire porous Si framework was converted to Ni. A conductive moat was as a result incorporated into p− Si substrate. The experimentally measured reduction of crosstalk in this structure is 5~18 dB at frequencies up to 35 GHz.

  8. 3D-macroporous hybrid scaffolds for tissue engineering: Network design and mathematical modeling of the degradation kinetics

    Energy Technology Data Exchange (ETDEWEB)

    Mansur, Herman S., E-mail: hmansur@demet.ufmg.br [Department of Metallurgical and Materials Engineering, Laboratory of Biomaterials and Tissue Engineering, Federal University of Minas Gerais (Brazil); Costa, Hermes S. [Department of Materials Engineering, CEFET-MG (Brazil); Mansur, Alexandra A.P.; Pereira, Marivalda [Department of Metallurgical and Materials Engineering, Laboratory of Biomaterials and Tissue Engineering, Federal University of Minas Gerais (Brazil)

    2012-04-01

    In the present study it is reported the synthesis, characterization and subsequent degradation performance of organic-inorganic hybrid systems chemically modified by bi-functional crosslinker (glutaraldehyde, GA). The hybrids were prepared by combining 70% poly (vinyl alcohol) and 30% bioactive glass (58SiO{sub 2}-33CaO-9P{sub 2}O{sub 5}, BaG) via sol-gel route using foaming-casting method producing different macroporous tri-dimensional scaffolds depending on the degree of network crosslinking. The in vitro degradation kinetics was evaluated by measuring the mass loss upon soaking into de-ionized water at 37 Degree-Sign C for up to 21 days and different mathematical models were tested. The PVA/BaG hybrids scaffolds properties 'as-synthesized' and after the degradation process were extensively characterized by Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), mechanical compressing tests and X-ray Micro-computed Tomography analysis ({mu}CT). The results have clearly shown the effectiveness of tailoring the PVA/BaG hybrids properties and degradation kinetics mechanisms by chemically engineering the structure at nano-order level using different concentrations of the crosslinker. Moreover, these hybrid crosslinked nanostructures have shown 3D hierarchical pore size with interconnected architecture within the range of 10-450 {mu}m for potential use in the field of bone regenerative medicine. Highlights: Black-Right-Pointing-Pointer Hybrid scaffolds 70% polyvinyl alcohol-30%/bioactive glass (58SiO{sub 2}-33CaO-9P{sub 2}O{sub 5}). Black-Right-Pointing-Pointer 3D-Macropore nanostructure engineered by covalent chemical crosslinker. Black-Right-Pointing-Pointer Pore size distribution and mechanical properties comparable to cancellous bone. Black-Right-Pointing-Pointer Analysis of degradation kinetics and mechanism using five mathematical models. Black-Right-Pointing-Pointer hybrid potentially appropriate for bone tissue

  9. Prevascularization of a gas-foaming macroporous calcium phosphate cement scaffold via coculture of human umbilical vein endothelial cells and osteoblasts.

    Science.gov (United States)

    Thein-Han, WahWah; Xu, Hockin H K

    2013-08-01

    The lack of a vasculature in tissue-engineered constructs is currently a major challenge in tissue regeneration. There has been no report of prevascularization of macroporous calcium phosphate cement (CPC) via coculture of endothelial cells and osteoblasts. The objectives of this study were to (1) investigate coculture of human umbilical vein endothelial cells (HUVEC) and human osteoblasts (HOB) on macroporous CPC for the first time; and (2) develop a new microvasculature-CPC construct with angiogenic and osteogenic potential. A gas-foaming method was used to create macropores in CPC. HUVEC and HOB were seeded with a ratio of HUVEC:HOB=4:1, at 1.5×10(5) cells/scaffold. The constructs were cultured for up to 42 days. CPC with a porosity of 83% had a flexural strength (mean±SD; n=6) of 2.6±0.2 MPa, and an elastic modulus of 340±30 MPa, approaching the reported values for cancellous bone. Reverse transcription-polymerase chain reaction showed that HUVEC+HOB coculture on CPC had much higher vascular endothelial growth factor (VEGF) and collagen I expressions than monoculture (p<0.05). Osteogenic markers alkaline phosphatase, osteocalcin (OC), and runt-related transcription factor 2 (Runx2) were also highly elevated. Immunostaining of PECAM1 (CD31) showed abundant microcapillary-like structures on CPC in coculture at 42 days, as HUVEC self-assembled into extensive branches and net-like structures. However, no microcapillary was found on CPC in monoculture. In immunohistochemical staining, the neo-vessels were strongly positive for PECAM1, the von Willebrand factor, and collagen I. Scanning electron microscopy revealed microcapillary-like structures mingling with mineral nodules on CPC. Cell-synthesized minerals increased by an order of magnitude from 4 to 42 days. In conclusion, gas-foaming macroporous CPC was fabricated and HUVEC+HOB coculture was performed for prevascularization, yielding microcapillary-like structures on CPC for the first time. The novel

  10. Development of the preparation technology of macroporous sorbent for industrial off-gas treatment including {sup 14}C

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Il Hoon; Cho, Young Hyun; Park, Guen Il; Kim, In Tae; Kim, June Hyung; Ahn, Byung Kil

    2001-01-01

    For environmental and health effects due to increasing levels of pollution in the atmosphere, it is necessary to develop environmentally sound technologies for the treatment of greenhouse gases (CO{sub 2}, CH{sub 4}, CFC, etc.) and acid gases (SOx, NOx, etc.). Specifically, advanced technology for CO{sub 2} capturing is currently one of the most important environmental issues in worldwide. {sup 14}CO{sub 2}, specially which has been gradually emerging issue in the nuclear facilities, is generated about 330 ppm from the CANDU (Canadian Deuterium Uranium Reactor) nuclear power plant and the DUPIC (Direct Use of spent PWR fuel in CANDU reactors) process which is the process of spent fuel treatment. For this purpose, it is necessary to develop the most efficient treatment technology of CO{sub 2} capture by various lime materials in semi- or dry process, it should be also considering a removal performance, waste recycling and safety of disposal. In order to develop a highly active slaked lime as a sorbent for CO{sub 2} and high temperature desulfurization, macroporous slaked lime is necessarily prepared by modified swelling process and equipment, which was developed under carrying out this project. And also for the optimal removal process of off-gases the removal performance tests of various sorbents and the effects of relative humidity and bed depth on the removal capacity must be considered.

  11. Rational design of three-dimensional macroporous silicon as high performance Li-ion battery anodes with long cycle life

    Science.gov (United States)

    Wu, Hao; Du, Ning; Shi, Xianxing; Yang, Deren

    2016-11-01

    Three-dimensional (3D) macroporous silicon with stable interconnected structure is prepared by magnesiothermic reduction based on deliberate design, while flexible morphological control of zero-dimensional (0D) hollow nanospheres is realized via simply altering the conditions of the same reaction. When used as anode materials in lithium-ion batteries, the empty space in both structures allows for effective accommodation of large volume changes during lithium insertion and extraction. Due to the robustness of the interconnected porous structure, the 3D Si@C electrode exhibits better electrochemical properties with a reversible capacity of 1058 mAh g-1 after 800 cycles and 91% capacity retention (only 0.012% capacity degradation per cycle). The coulombic efficiency of the 3D porous electrode stabilizes at 99.4% in later cycles. The results demonstrated herein provide a better understanding of the controllable magnesiothermic reduction reaction, which is potentially an efficient method for large scale synthesis of high-performance Si anodes.

  12. Hierarchical bioceramic scaffolds with 3D-plotted macropores and mussel-inspired surface nanolayers for stimulating osteogenesis

    Science.gov (United States)

    Xu, Mengchi; Zhai, Dong; Xia, Lunguo; Li, Hong; Chen, Shiyi; Fang, Bing; Chang, Jiang; Wu, Chengtie

    2016-07-01

    The hierarchical structure of biomaterials plays an important role in the process of tissue reconstruction and regeneration. 3D-plotted scaffolds have been widely used for bone tissue engineering due to their controlled macropore structure and mechanical properties. However, the lack of micro- or nano-structures on the strut surface of 3D-plotted scaffolds, especially for bioceramic scaffolds, limits their biological activity. Inspired by the adhesive versatility of mussels and the active ion-chelating capacity of polydopamine, we set out to prepare a hierarchical bioceramic scaffold with controlled macropores and mussel-inspired surface nanolayers by combining the 3D-plotting technique with the polydopamine/apatite hybrid strategy in order to synergistically accelerate the osteogenesis and angiogenesis. β-Tricalcium phosphate (TCP) scaffolds were firstly 3D-plotted and then treated in dopamine-Tris/HCl and dopamine-SBF solutions to obtain TCP-DOPA-Tris and TCP-DOPA-SBF scaffolds, respectively. It was found that polydopamine/apatite hybrid nanolayers were formed on the surface of both TCP-DOPA-Tris and TCP-DOPA-SBF scaffolds and TCP-DOPA-SBF scaffolds induced apatite mineralization for the second time during the cell culture. As compared to TCP scaffolds, both TCP-DOPA-Tris and TCP-DOPA-SBF scaffolds significantly promoted the osteogenesis of bone marrow stromal cells (BMSCs) as well as the angiogenesis of human umbilical vein endothelial cells (HUVECs), and the TCP-DOPA-SBF group presented the highest in vitro osteogenic/angiogenic activity among the three groups. Furthermore, both TCP-DOPA-Tris and TCP-DOPA-SBF scaffolds significantly improved the formation of new bone in vivo as compared to TCP scaffolds without a nanostructured surface. Our results suggest that the utilization of a mussel-inspired Ca, P-chelated polydopamine nanolayer on 3D-plotted bioceramic scaffolds is a viable and effective strategy to construct a hierarchical structure for synergistically

  13. Spatial dispersion and clustering of soil structure through lacunarity of X-ray CT images of soil macropore volumes

    Science.gov (United States)

    San José Martínez, Fernando; Caniego, Javier; García-Gutiérrez, Carlos

    2016-04-01

    Lacunarity can be seen as a scale dependent measure of heterogeneity or texture ―in terms of image analysis― that was first introduced to quantify different patterns of dispersion and clustering that display geometrical objects with the same fractal dimension. Notwithstanding, lacunarity functions have been revealed as means to measure the deviation of object's geometrical structure from translational invariance beyond self-similarity and fractal geometry. In this work, we will explore how lacunarity quantifies different patterns of dispersion and clustering of different geometrical structures of soil macropore volumes imaged by X-ray computed tomography. Samples extracted from columns were collected at the experimental farm "Finca La Grajera" in La Rioja (Spain), property of La Rioja Regional Government (northern Spain). The vineyard selected was established in 1996. During the 1996 to 2004 period, the soil management was conventional tillage. Before the vineyard was established in 1996, a pasture-legume-cereal rotation was used. In 2004 an experiment was established with different types of soil cover management in between. On December 2010 columns were extracted vertically by percussion drilling between rows of the vineyard.

  14. A critical review on gas diffusion micro and macroporous layers degradations for improved membrane fuel cell durability

    Science.gov (United States)

    Lapicque, Francois; Belhadj, Mariem; Bonnet, Caroline; Pauchet, Joël; Thomas, Yohann

    2016-12-01

    Formerly considered as a secondary component of fuel cell, gas diffusion layers (GDLs) have been shown to have a key role in gas transport to the catalyst layers and in water management: in particular, the microporous layer (MPL) deposited on the diffusion substrate has an active part in water distribution in the membrane electrode assembly and in its efficient removal from the cell. In addition to its perfect design for the targeted application and in combination with the macroporous substrate (MPS), the MPL structure and physicochemical properties have to contribute to the cell durability, which is still considered as insufficient for larger, massive commercialisation of this energy conversion system. The paper is aimed at reviewing the main knowledge gained on the role of the MPL on GDL operation and durability, with investigation of degradation phenomena of both MPL and MPS, together with the role played by the MPL in mitigating the occurrence of degradation phenomena that can occur in the whole fuel cell. In addition to the reviewing purpose, original data on ex-situ degradation of GDL are presented.

  15. Meso-macroporous Fe-doped Cu O: Synthesis, characterization, and structurally enhanced adsorption and visible-light photocatalytic activity

    Institute of Scientific and Technical Information of China (English)

    朱剑飞; 肖奇

    2015-01-01

    The meso-macroporous Fe-doped Cu O was prepared by a simple hydrothermal method combined with post-annealing. The samples were characterized by X-ray powder diffraction(XRD), scanning electron microscopy(SEM), Brunauer-Emmett-Teller N2 adsorption-desorption analyses and UV-vis diffuses reflectance spectroscopy. The Fe-doped Cu O sample shows higher adsorption capacity and photocatalytic activity for xanthate degradation than pure Cu O under visible light irradiation. In addition, the adsorption process is found to fit Langmuir isotherms and pseudo-second-order kinetics. The the first order kinetic Langmuir Hinshelwood model was used to study the reaction kinetics of photocatalytic degradation, and the apparent rate constant( k) was calculated. The value of k for Fe-doped Cu O is 1.5 times that of pure Cu O. The higher photocatalytic activity of Fe-doped Cu O is attributed to higher specific surface area together with stronger visible light absorption.

  16. Decoloring Methyl Orange under Sunlight by a Photocatalytic Membrane Reactor Based on ZnO Nanoparticles and Polypropylene Macroporous Membrane

    Directory of Open Access Journals (Sweden)

    Bing Hu

    2013-01-01

    Full Text Available Decoloring methyl orange (MeOr under sunlight was conducted in a photocatalytic membrane reactor (PMR. Zinc oxide nanoparticles (ZnO NPs were suspended in the solution or immobilized on the membrane. The membrane was modified by grafting 2-hydroxyethyl methacrylate (HEMA to enhance the adsorption of ZnO NPs on the hydrophobic membrane surface and improve the membrane permeability. The results show that the water fluxes through the modified membranes are higher than that through the unmodified membrane. After introducing ZnO NPs to the membrane, the water fluxes still rise with the immobilization degree of ZnO NPs. For the PMR with ZnO NPs in suspension, the photocatalytic decoloration percent (PDP was over 98.2% after 40 min under sunlight. For the PMR with ZnO NPs immobilized on the membrane, the max of PDP was 74.3% after 6 h under sunlight, and maintained at 72% after repeated uses for five times. These results demonstrate that photocatalytic membrane reactor (PMR based on ZnO NPs and polypropylene macroporous membrane(PPMM could be applied in decoloring dyes.

  17. Large-area monocrystalline silicon thin films by annealing of macroporous arrays: Understanding and tackling defects in the material

    Science.gov (United States)

    Depauw, Valérie; Gordon, Ivan; Beaucarne, Guy; Poortmans, Jef; Mertens, Robert; Celis, Jean-Pierre

    2009-08-01

    A concept that could provide a thin monocrystalline-silicon absorber layer without resorting to the expensive step of epitaxy would be very appealing for reducing the cost of solar cells. The empty-space-in-silicon technique by which thin films of silicon can be formed by reorganization of regular arrays of cylindrical voids at high temperature may be such a concept if the high quality of the thin film could be ensured on centimeter-large areas. While previous works mainly investigated the influence of the porous array on the final structure, this work focuses on the practical aspects of the high-temperature step and its application to large areas. An insight into the defects that may form is given and the origin of these defects is discussed, providing recommendations on how to avoid them. Surface roughening, pitting, formation of holes, and silicon pillars could be attributed to the nonuniform reactions between Si, SiO2, and SiO. Hydrogen atmospheres are therefore preferred for reorganization of macroporous arrays. Argon atmospheres, however, may provide high-quality silicon thin films as well, possibly even more easily transferable, as long as annealing is performed in controlled, clean, and oxygen-free conditions. Our experiments on large areas also highlight the importance of kinetics, which had not been considered up to now and which will require further understanding to ensure a complete reorganization over any wafer area.

  18. Preparative separation and purification of rebaudioside a from steviol glycosides using mixed-mode macroporous adsorption resins.

    Science.gov (United States)

    Liu, Yongfeng; Di, Duolong; Bai, Qingqing; Li, Jintian; Chen, Zhenbin; Lou, Song; Ye, Helin

    2011-09-14

    Preparative separation and purification of rebaudioside A from steviol glycosides using mixed-mode macroporous adsorption resins (MARs) were systematically investigated. Mixed-mode MARs were prepared by a physical blending method. By evaluation of the adsorption/desorption ratio and adsorption/desorption capacity of mixed-mode MARs with different proportions toward RA and ST, the mixed-mode MAR 18 was chosen as the optimum strategy. On the basis of the static tests, it was found that the experimental data fitted best to the pseudosecond-order kinetics and Temkin-Pyzhev isotherm. Furthermore, the dynamic adsorption/desorption experiments were performed on the mini column packed with mixed-mode MAR 18. After one run treatment, the purity of rebaudioside A in purified product increased from 40.77 to 60.53%, with a yield rate of 38.73% (W/W), and that in residual product decreased from 40.77 to 36.17%, with a recovery yield of 57.61% (W/W). The total recovery yield reached 96.34% (W/W). The results showed that this method could be utilized in large-scale production of rebaudioside A from steviol glycosides in industry.

  19. Enrichment of antioxidants in black garlic juice using macroporous resins and their protective effects on oxidation-damaged human erythrocytes.

    Science.gov (United States)

    Zou, Ying; Zhao, Mouming; Yang, Kun; Lin, Lianzhu; Wang, Yong

    2017-08-15

    The black garlic juice is popular for its nutritive value. Enrichment of antioxidants is needed to make black garlic extract an effective functional ingredient. Five macroporous resins were evaluated for their capacity in adsorbing antioxidants in black garlic juice. XAD-16 resin was chosen for further study due to its high adsorption and desorption ratios. Pseudo-second-order kinetics (qe=625μmol Trolox equiv/g dry resin, k2=0.0001463) and Freundlich isotherm models (ΔH=-10.1547kJ/mol) were suitable for describing the whole exothermic and physical adsorption processes of the antioxidants from black garlic juice on XAD-16 resin. The antioxidants and phenolics were mostly enriched in 40% ethanol fraction by XAD-16 resin column chromatography. The black garlic extract and its fractions could protect erythrocytes against AAPH-induced hemolysis in dose-dependent manners. The pretreatment of AAPH-damaged erythrocytes with 40% ethanol fractions (2.5mg/mL) significantly decreased the hemolysis ratios from 53.58% to 3.79%. The 40% ethanol fraction possessing strong intracellular antioxidant activity could be used as a functional food ingredient. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Adsorption thermodynamics of macroporous resin adsorbing paeoniflorin%大孔树脂吸附芍药苷的吸附热力学研究

    Institute of Scientific and Technical Information of China (English)

    王玥; 杜守颖; 徐冰

    2011-01-01

    目的 选择7种不同极性的大孔树脂,以芍药苷为指标优选最佳的树脂富集、纯化牡丹皮药材中的有效成分,并研究芍药苷在此树脂上吸附的热力学特性.方法 采用静态吸附法考察了不同型号大孔树脂对芍药苷的吸附和解吸性能,以优选的树脂对芍药苷的吸附热力学参数为依据,利用热力学函数关系计算出了吸附焓、吸附自由能和吸附熵等,从物理化学的角度探讨了树脂的吸附机理.结果 HPD200A型大孔树脂对牡丹皮中的芍药苷有良好的吸附和解吸性能,优于其他树脂.该树脂对芍药苷的吸附平衡数据符合Freundlich吸附等温方程,平衡吸附系数随温度的升高而增大且吸附焓大于零,确定该吸附属于吸热过程;特征常数大于1且吸附自由能小于零表明该吸附属于自发过程;吸附焓小于40,显示发生了一种物理吸附并伴有氢键吸附的过程.结论 热力学参数显示,温度升高有利于该树脂吸附的进行,在实际生产中,可将提取液趁热上大孔树脂纯化,既节省冷却的步骤,又增大了吸附量.%Objective To select 7 types of macroporous resins with different polarities, optimize the best one taken paeoniflorin as index for enriching and purifying the active principles of Mudanpi ( Cortex Moulan Radicis) , and study the characteristics of adsorption thermodynamics. Methods The adsorption and desorption capabilityies of different types of macroporous resins to paeoniflorin were investigated by using static adsorption method. Taking adsorption thermodynamic parameters of optimized resin to paeoniflorin as a base, the adsorption enthalpy, adsorption free energy and adsorption entropy were calculated by using functional relation of thermodynamics. The adsorption mechanism of macroporous resin was studied from the aspect of chemicophysics. Results The type of HPD200A macroporous resin had good capabilities of adsorption and desorption for paeoniflorin

  1. Selective removal of nitrate by using a novel macroporous acrylic anion exchange resin

    Institute of Scientific and Technical Information of China (English)

    Hai Ou Song; Yang Zhou; Ai Min Li; Sandra Mueller

    2012-01-01

    An anion exchange resin NDP-5 has been prepared successfully and applied on the selective removal of nit-ate from SO42-/NO3- binary co-existence system.The composition and morphology of NDP-5 were confirmed by FT-IR and SEM.The NDP-5 resin exhibits the completely different behavior on the adsorption capacity,adsorption kinetic and the effect of the completing anion in the absence or presence of sulfate,compared to D213.And,the resultants of kinetic are well fitted by the pseudo-first-order and pseudo-second-order models.These results are very important to develop novel resins with great features.

  2. Preparation and characterization of polyhydroxyalkanoates macroporous scaffold through enzyme-mediated modifications.

    Science.gov (United States)

    Ansari, Nor Faezah; Amirul, A A

    2013-06-01

    Polyhydroxyalkanoates (PHAs) are hydrophobic biodegradable thermoplastics that have received considerable attention in biomedical applications due to their biocompatibility, mechanical properties, and biodegradability. In this study, the degradation rate was regulated by optimizing the interaction of parameters that influence the enzymatic degradation of P(3HB) film using response surface methodology (RSM). The RSM model was experimentally validated yielding a maximum 21 % weight loss, which represents onefold increment in percentage weight loss in comparison with the conventional method. By using the optimized condition, the enzymatic degradation by an extracellular PHA depolymerase from Acidovorax sp. DP5 was studied at 37 °C and pH 9.0 on different types of PHA films with various monomer compositions. Surface modification of scaffold was employed using enzymatic technique to create highly porous scaffold with a large surface to volume ratio, which makes them attractive as potential tissue scaffold in biomedical field. Scanning electron microscopy revealed that the surface of salt-leached films was more porous compared with the solvent-cast films, and hence, increased the degradation rate of salt-leached films. Apparently, enzymatic degradation behaviors of PHA films were determined by several factors such as monomer composition, crystallinity, molecular weight, porosity, and roughness of the surface. The hydrophilicity and water uptake of degraded salt-leached film of P(3HB-co-70%4HB) were enhanced by incorporating chitosan or alginate. Salt-leached technique followed by partial enzymatic degradation would enhance the cell attachment and suitable for biomedical as a scaffold.

  3. Optimization of polyphenol removal from kiwifruit juice using a macroporous resin.

    Science.gov (United States)

    Gao, Zhenpeng; Yu, Zhifang; Yue, Tianli; Quek, Siew Young

    2017-06-01

    The separation of polyphenols from kiwifruit juice is essential for enhancing sensory properties and prevent the browning reaction in juice during processing and storage. The present study investigated the dynamic adsorption and desorption of polyphenols in kiwifruit juice using AB-8 resin. The model obtained could be successfully applied to predict the experimental results of dynamic adsorption capacity (DAC) and dynamic desorption quantity (DDQ). The results showed that dynamic adsorption of polyphenols could be optimised in a juice concentration of 19 °Brix, with a feed flow-rate of 1.3 mL min(-1) and a feed volume of 7 bed volume (BV). The optimum conditions for dynamic desorption of polyphenols from the AB-8 resin were an ethanol concentration of 43% (v/v), an elute flow-rate of 2.2 mL min(-1) and an elute volume of 3 BV. The optimized DAC value was 3.16 g of polyphenols kg(-1) resin, whereas that for DDQ was 917.5 g kg(-1) , with both values being consistent with the predicted values generated by the regression models. The major polyphenols in the dynamic desorption solution consisted of seven compositions. The present study could be scaled-up using a continuous column system for industrial application, thus contributing to the improved flavor and color of kiwifruit juice. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  4. Macroporous Activated Carbon Derived from Rapeseed Shell for Lithium–Sulfur Batteries

    Directory of Open Access Journals (Sweden)

    Mingbo Zheng

    2017-10-01

    Full Text Available Lithium–sulfur batteries have drawn considerable attention because of their extremely high energy density. Activated carbon (AC is an ideal matrix for sulfur because of its high specific surface area, large pore volume, small-size nanopores, and simple preparation. In this work, through KOH activation, AC materials with different porous structure parameters were prepared using waste rapeseed shells as precursors. Effects of KOH amount, activated temperature, and activated time on pore structure parameters of ACs were studied. AC sample with optimal pore structure parameters was investigated as sulfur host materials. Applied in lithium–sulfur batteries, the AC/S composite (60 wt % sulfur exhibited a high specific capacity of 1065 mAh g−1 at 200 mA g−1 and a good capacity retention of 49% after 1000 cycles at 1600 mA g−1. The key factor for good cycling stability involves the restraining effect of small-sized nanopores of the AC framework on the diffusion of polysulfides to bulk electrolyte and the loss of the active material sulfur. Results demonstrated that AC materials derived from rapeseed shells are promising materials for sulfur loading.

  5. Enrichment and purification of total flavonoids from Flos Populi extracts with macroporous resins and evaluation of antioxidant activities in vitro.

    Science.gov (United States)

    Wan, Pengfei; Sheng, Zunlai; Han, Qiang; Zhao, Yulin; Cheng, Guangdong; Li, Yanhua

    2014-01-15

    Enrichment and purification of total flavonoids from Flos Populi extracts were studied using five macroporous resins. The static tests indicated that NKA-9 resin was appropriate and its adsorption data were well fitted to the Langmuir and Freundlich isotherms. To optimize the separation process, dynamic adsorption and desorption tests were carried out. The optimal adsorption parameters were initial concentrations in sample solution of 7.64mg/mL, pH of 5.0, sample loading amount of 2.3BV, flow rate of 2BV/h, temperature of 25°C. The optimal desorption parameters were deionized water and 20% ethanol each 5BV, then 60% ethanol of 10 BV, flow rate of 2BV/h. After one run treatment with NKA-9 resin, the content of total flavonoids in the product increased from 11.38% to 53.41%, and the recovery yield was 82.24%. The results showed that NKA-9 resin revealed a good ability to enrichment total flavonoids from Flos Populi, and the method can be referenced for the enrichment of total flavonoids from other materials. The antioxidant activities of the purified flavonoids were further evaluated in vitro. It showed that the DPPH radical scavenging increased from 59.46% to 82.63% at different concentrations (0.06-0.14mg/mL). At different concentrations (0.6-1.4mg/mL), the hydroxyl radical scavenging increased from 35.39% to 74.12%. Moreover, the reducing ability and total oxidant capacity appeared to be dose-dependent of flavonoids. It indicated that the purified flavonoids can be used as a source of potential antioxidant.

  6. Synthesis of mono- and bi-layer MFI zeolite films on macroporous alumina tubular supports: Application to nanofiltration

    Science.gov (United States)

    Said, Ali; Limousy, Lionel; Nouali, Habiba; Michelin, Laure; Halawani, Jalal; Toufaily, Joumana; Hamieh, Tayssir; Dutournié, Patrick; Daou, T. Jean

    2015-10-01

    This work is dedicated to the development of MFI-type structure zeolite films (single-layer or bilayer) on the internal layer of a specific macroporous alumina tubular support for nanofiltration applications. The bottom MFI layer was obtained by direct hydrothermal synthesis while a secondary growth method was used for the top MFI layer. A complete characterization of the obtained MFI membranes (single-layer or bilayer) is proposed using various techniques, such as X-ray diffraction, scanning electron microscopy, mercury porosimetry and nitrogen sorption measurements. Dense and highly crystallized films of MFI-type structure zeolite were obtained for both single-layer and bilayer MFI films. The total film thickness were around 7.1±0.5 μm and 14.5±1 μm for single-layer and bilayer MFI films respectively. The Si/Al molar ratio of the MFI films varied between 185 and 305 for single-layer and bilayer MFI films respectively. The hydraulic permeability of the tubular MFI membrane was achieved by the filtration of pure water. The hydraulic permeability of the single-layer and bilayer MFI membranes decreased rapidly at the beginning of the conditioning process, and stabilized at 1.08×10-14 m3 m-2 and 1.02×10-15 m3 m-2 after 15 h and the rejection rates of neutral solute (Vb 12) are 10% and 50% for the single-layer and bilayer MFI films respectively.

  7. Engineering three-dimensional macroporous hydroxyethyl methacrylate-alginate-gelatin cryogel for growth and proliferation of lung epithelial cells.

    Science.gov (United States)

    Singh, Deepti; Zo, Sun Mi; Kumar, Ashok; Han, Sung Soo

    2013-01-01

    Three-dimensional (3D) growth of cell is of particular interest in the field of tissue engineering and regenerative medicine. Scaffolds used for this purpose are often tailor-made to mimic the microenvironment and the extracellular matrix of the tissue with defined role such as to provide appropriate structural, chemical, and mechanical support. The aim of the study was to design the macroporous matrix with potential in the field of tissue engineering especially for lung muscle regeneration. Blend of hydroxyethyl methacrylate-alginate-gelatin (HAG) cryogel scaffold was synthesized using cryogelation technique and this polymer material combination is being reported first time. The rheology study showed the elastic property of the material in wet state with no variation in storage modulus (G'), loss modulus (G″), and phase angle upon temperature variation. The microcomputer tomography (micro-CT) analysis confirmed the homogenous polymer structure with average pore diameter of 84 μm. Scaffold synthesized using polymer combinations which is mixture of polysaccharide (alginate) and protein (gelatin) provides supportive environment for human lung epithelial cell proliferation confirmed by cytoskeletal stain phalloidin and nuclei staining 4',6-diamidino-2-phenylindole checked for over three weeks. The in vivo biocompatibility was further performed which showed integration of scaffold to the surrounding tissue with ability to recruit cells. However, at first week, small amount of infiltrating mast cells were found which subsequently diminished in following weeks. Immunohistochemistry for dendritic cells confirmed in vivo biocompatible nature of the HAG scaffold. The mechanical strength, stiffness, elastic measurements, in vivo compatibility, and in vitro lung cell proliferation show the potentiality of HAG materials for lung tissue engineering.

  8. Macroporous poly(vinyl alcohol) microspheres bearing phosphate groups as a new adsorbent for low-density lipoprotein apheresis

    Energy Technology Data Exchange (ETDEWEB)

    Wang Weichao; Xie Hui; Ou Lailiang; Wang Lianyong; Yu Yaoting; Kong Deling [Key Laboratory of Bioactive Materials, Ministry of Education, College of Life Science, Nankai University, Tianjin 300071 (China); Sun Lisha, E-mail: wly@nankai.edu.c, E-mail: kongdeling@nankai.edu.c [General Hospital, Tianjin Medical University, Tianjin 300052 (China)

    2009-12-15

    A new low-density lipoprotein (LDL) adsorbent with phosphate groups as the ligand was prepared in this study. Macroporous poly(vinyl acetate-co-triallyl isocyanurate) microspheres were prepared using a free-radical suspension polymerization method. A hydrolysis reaction in sodium hydroxide/methanol changed the materials into poly(vinyl alcohol) (PVA) microspheres. Further reaction with phosphorus oxychloride in anhydrous DMF led to the LDL adsorbent PVA-phosphate microspheres. The preparation conditions such as reaction time, temperature and the amount of phosphorus oxychloride were optimized. The adsorption of plasma lipoproteins was examined by in vitro adsorption assays. The influence of adsorption time, plasma volume and ionic strength on the adsorption capacity was investigated. The circulation adsorption showed that the pathogenic lipoproteins in the plasma such as total cholesterol (TC), LDL and triglyceride (TG) could be removed markedly, in which the removal percentages were 42.9%, 45.0% and 44.74%, respectively. However, the reduction of high-density lipoprotein (HDL) and other normal plasma components was very slight. For in vivo experiment, rabbits were fed with high-cholesterol food to develop a hyperlipidemia model and treated by extracorporeal blood perfusion using the PVA-phosphate columns. Eight hyperlipidemia rabbits were treated with the PVA-phosphate adsorbent, and the removal of TC, LDL and TG was 45.03 +- 6.64%, 48.97 +- 9.92% and 35.42 +- 14.17%, respectively. The sterilization and storage tests showed that the adsorbent was chemically and functionally stable. It could be easily sterilized by a common method and stored for months without loss of adsorption capacity. Therefore, this new PVA-phosphate-based LDL adsorbent may have potential for application in LDL apheresis.

  9. Immobilization of trypsin onto multifunctional meso-/macroporous core-shell microspheres: A new platform for rapid enzymatic digestion

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Gong [State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Changchun 130022 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Chen, Ping [Key Laboratory of Marine Bioresources and Ecology, College of Life Science, Shenzhen University, Shenzhen 518060 (China); Wang, Zhi-Gang; Sui, Xiao-Jing [State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Changchun 130022 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Zhang, Ji-Lin, E-mail: zjl@ciac.ac.cn [State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Changchun 130022 (China); Ni, Jia-Zuan [State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Changchun 130022 (China); Key Laboratory of Marine Bioresources and Ecology, College of Life Science, Shenzhen University, Shenzhen 518060 (China)

    2014-02-17

    Graphical abstract: -- Highlights: •A novel microwave-assisted tryptic digestion system. •Characterization with SEM, TEM, EDX, XRD, and FT-IR. •The meso-/macroporous shell structure withthe high affinity and loading capacity of trypsin. •Decrease of digestion time up to less than 1 min. •MALDI-MS and nanoLC-MS analysis with database identification. -- Abstract: A simple, fast, efficient, and reusable microwave-assisted tryptic digestion system which was constructed by immobilization of trypsin onto porous core-shell Fe{sub 3}O{sub 4}@fTiO{sub 2} microspheres has been developed. The nanostructure with magnetic core and titania shell has multiple pore sizes (2.4 and 15.0 nm), high pore volume (0.25 cm{sup 3} g{sup −1}), and large surface area (50.45 m{sup 2} g{sup −1}). For the proteins, the system can realize fast and efficient microwave-assisted tryptic digestion. Various standard proteins (e.g., cytochrome c (cyt-c), myoglobin (MYO), β-lactoglobulin (β-LG), and bovine serum albumin (BSA)) used can be digested in 45 s under microwave radiation, and they can be confidently identified by mass spectrometry (MS) analysis; even the concentration of substrate is as low as 5 ng μL{sup −1}. Furthermore, the system for the 45 s microwave-assisted tryptic digestion is still effective after the trypsin-immobilized microspheres have been reused for 5 times. Importantly, 1715 unique proteins from 10 μg mouse brain proteins can be identified with high confidence after treatment of 45 s microwave-assisted tryptic digestion.

  10. Enhanced Production of Botrallin and TMC-264 with in Situ Macroporous Resin Adsorption in Mycelial Liquid Culture of the Endophytic Fungus Hyalodendriella sp. Ponipodef12

    Directory of Open Access Journals (Sweden)

    Haiyu Luo

    2014-09-01

    Full Text Available Hyalodendriella sp. Ponipodef12, an endophytic fungus from the hybrid “Neva” of Populus deltoides × P. nigra, is a high producer of the bioactive dibenzo-α-pyrones botrallin and TMC-264. However, both the botrallin and TMC-264 produced by Hyalodendriella sp. Ponipodef12 were retained as both intracellular and extracellular products. The aim of this study was to evaluate an in situ macroporous resin adsorption for enhancement of botrallin and TMC-264 production in mycelial liquid culture of Hyalodendriella sp. Ponipodef12. Production of botrallin and TMC-264 was most effectively enhanced by macroporous resin DM-301 among the thirteen nonionic macroporous resins tested. The highest botrallin yield (51.47 mg/L, which was 2.29-fold higher than the control at 22.49 mg/L was obtained by adding resin DM-301 at 4.38% (g/mL to the culture broth on day 24 and allowing a period of 4 days for adsorption. The highest TMC-264 yield reached 47.74 mg/L, which was 11.76-fold higher than that of the control (4.06 mg/L, and was achieved by adding DM-301 resin at 4.38% (w/v in the culture broth on day 24 and allowing a period of 6 days for adsorption. The results show that in situ resin adsorption is an effective strategy for enhancing production of botrallin and TMC-264, and also for facilitating their recovery from mycelial liquid culture of Hyalodendriella sp. Ponipodef12.

  11. Using X-ray imaging for monitoring the development of the macropore network in a soil sample exposed to natural boundary conditions

    Science.gov (United States)

    Koestel, John

    2015-04-01

    Soil macrostructure is not static but continuously modified by climatic and biological factors. Knowledge of how a macropore network evolves in an individual soil sample is however scarce because it is difficult to collect respective time-lapse data in the field. In this study I investigated whether it is reasonable to use X-ray imaging to monitor the macropore network development in a small topsoil column (10 cm high, 6.8 cm diameter) that is periodically removed from the field, X-rayed and subsequently installed back in the field. Apart from quantifying the structural changes of the macropore network in this soil sample, I investigated whether earthworms entered the soil column and whether roots grew beyond the lower bottom of the column into the subsoil. The soil was sampled from a freshly hand-ploughed allotment near Uppsala (Sweden) in the beginning of June 2013. Rucola (eruca vesicaria) was sown on the top of the column and in its vicinity. When the soil column was for the first time removed from the field and scanned in October 2013, it contained four new earthworm burrows. Root growth into the subsoil was largely absent. Over winter, in May 2014, no further earthworm burrows had formed. Instead, the macrostructure had started to disintegrate somewhat. No crop was sown in the 2014 vegetation period and the soil sample was left unploughed. In October 2014, the column contained again new earthworm burrows. Furthermore, a dandelion had established on the soil column together with some grasses. Several roots had now connected the soil column with the subsoil. The study shows that X-ray tomography offers a promising opportunity for investigating soil structure evolution, even though it cannot be directly installed in the field.

  12. Preparation of zeolite-A/chitosan hybrid composites and their bioactivities and antimicrobial activities

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Liang; Gong, Jie [State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemistry and Chemical Engineering, Nanjing University of Technology, Nanjing 210009 (China); Zeng, Changfeng [College of Mechanic and Power Engineering, Nanjing University of Technology, Nanjing 210009 (China); Zhang, Lixiong, E-mail: lixiongzhang@yahoo.com [State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemistry and Chemical Engineering, Nanjing University of Technology, Nanjing 210009 (China)

    2013-10-15

    Zeolite-A/chitosan hybrid composites with zeolite contents of 20–55 wt.% were prepared by in situ transformation of silica/chitosan mixtures in a sodium aluminate alkaline solution through impregnation–gelation–hydrothermal synthesis. The products were characterized by X-ray diffraction, diffuse reflectance infrared Fourier transform spectroscopy, scanning electron microscopy, thermogravimetric analysis, and mercury penetration porosimetry. Their in vitro bioactivities were examined using as-synthesized and Ca{sup 2+}-exchanged hybrid composites in simulated body fluid (SBF) for hydroxyapatite (HAP) growth. Their antimicrobial activities for Escherichia coli (E. coli) in trypticase soy broth (TSB) were evaluated using Ag{sup +}-exchanged hybrid composites. The zeolite-A/chitosan hybrid composites could be prepared as various shapes, including cylinders, plates and thin films. They possessed macropores with pore sizes ranging from 100 to 300 μm and showed compressive mechanical strength as high as 3.2 MPa when the zeolite content was 35 wt.%. Fast growth on the Ca{sup 2+}-exchanged hybrid composites was observed with the highest weight gain of 51.4% in 30 days. The 35 wt.% Ag{sup +}-exchanged hybrid composite showed the highest antimicrobial activity, which could reduce the 9 × 10{sup 6} CFU mL{sup −1}E. coli concentration to zero within 4 h of incubation time with the Ag{sup +}-exchanged hybrid composite amount of 0.4 g L{sup −1}. The bioactivity and antimicrobial activity could be combined by ion-exchanging the composites first with Ca{sup 2+} and then with Ag{sup +}. These zeolite-A/chitosan hybrid composites have potential applications on tissue engineering and antimicrobial food packaging. - Graphical abstract: Zeolite A/chitosan hybrid composites were prepared by in situ transformation of precursors in the chitosan matrix, which possess macroporous structures and exhibit superior bioactivity and antimicrobial activity and potential biomedical

  13. 大孔吸附树脂对辣椒素类似物的富集%Enrichment of capsaicin analogues by macroporous adsorption resin

    Institute of Scientific and Technical Information of China (English)

    金红星; 田方; 成文玉

    2009-01-01

    为纯化发酵产物,用大孔吸附树脂对辣椒素类似物进行富集.通过静态吸附解吸附试验,筛选一种性能较好的树脂.进一步研究该树脂对辣椒素类似物的动态吸附与解吸性能,并确定其最优条件.富集后溶液中辣椒素类似物的含量提高约1.8倍.%To purify the fermentation product the capsaicin analogues were enriched with macroporous adsorption resin.A macroporous adsorption resin was selected as the medium for the purification of capsaicin analogues after comparing static adsorption and elution performances.Furthermore the optimal concentrations were determined after the investigation of dynamic adsorption and elution behavior of this resin.The content of capsaicin analogues in solution was enriched about 1.8 times than before.

  14. Highly specific separation for antitumor Spiropreussione A from endophytic fungal [Preussia sp.] fermentation broth by one-step macroporous resins AB-8 treatment.

    Science.gov (United States)

    Li, Bing; Wang, Chunlan; Chen, Xiaomei; Lyu, Jing; Guo, Shunxing

    2013-11-01

    It is attractive to pharmaceutical works to seek useful material from endophytic fungi. Spiropreussione A (SA) which is isolated from endophytic fungus Preussia sp. is a novel anti-tumor product. Since previous preparation method cannot provide enough SA, and considering the large volume of broth and low concentration of the target product, macroporous resins were introduced to separate SA in our study. Four kinds of macroporous resins ADS-8, H103, X-5 and AB-8 were applied for separating SA, and AB-8 was selected as the optimal resin according to its performances through static and dynamic measurements. HPLC was used to analyze SA in all samples. Under optimal conditions, the specific SA adsorption capacity of AB-8 resin was 15.23mg/g, and the purity increased by 2.5-fold from 35.0% in broth to 90.0% in eluent with 70.0% recovery yield by a one-step treatment. Conclusively, our study achieved the goal of separating and purifying SA in high efficiency, and offered references for further fermentation works. Copyright © 2013 Elsevier B.V. All rights reserved.

  15. Kinetics of lipase recovery from the aqueous phase of biodiesel production by macroporous resin adsorption and reuse of the adsorbed lipase for biodiesel preparation.

    Science.gov (United States)

    Zhao, Xuebing; Fan, Ming; Zeng, Jing; Du, Wei; Liu, Canming; Liu, Dehua

    2013-04-10

    A commercial macroporous resin (D3520) was screened for lipase recovery by adsorption from the aqueous phase of biodiesel production. The influences of several factors on the adsorption kinetics were investigated. It was found that the kinetic behavior of lipase adsorption by macroporous resin could be well described by pseudo-first-order model. Temperature had no significant effects on lipase adsorption, while resin-to-protein ratio (R) significantly affected both rate constant (k1) and equilibrium adsorption capacity (Qe). No lipase was adsorbed when mixing (shaking) was not performed; however, protein recovery reached 98% after the adsorption was conducted at 200rpm for 5h in a shaker. The presence of methanol and glycerol showed significant negative influence on lipase adsorption kinetics. Particularly, increasing glycerol concentration could dramatically decrease k1 but not impact Qe. Biodiesel was found to dramatically decrease Qe even present at a concentration as low as 0.02%, while k1 was found to increase with biodiesel concentration. The adsorbed lipase showed a relatively stable catalytic activity in tert-butanol system, but poor stability in solvent-free system when used for biodiesel preparation. Oil and biodiesel were also found to adsorb onto resin during transesterification in solvent-free system. Therefore, the resin had to be washed by anhydrous methanol before re-used for lipase recovery.

  16. Hydrothermal synthesis of meso/macroporous BiVO4 hierarchical particles and their photocatalytic degradation properties under visible light irradiation.

    Science.gov (United States)

    Madhusudan, Puttaswamy; Kumar, Malahalli Vijaya; Ishigaki, Tadashi; Toda, Kenji; Uematsu, Kazuyoshi; Sato, Mineo

    2013-09-01

    An ordered hierarchical meso/macroporous monoclinic bismuth vanadate (BiVO4) particle was fabricated for the first time by a simple two-step melamine template hydrothermal method followed by calcination. The physiochemical parameters of as-prepared porous materials were characterized by means of X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, Raman, Barrett-Emmett-Teller, and UV-vis techniques. The nitrogen adsorption-desorption measurement and pore size distribution curve suggest that meso/macropores exist in these hierarchical microarchitectures. Further, it is found that melamine plays a significant role in the formation of porous BiVO4 particles, and when a known amount of melamine was added, the surface area and pore size of such porous BiVO4 particles were increased. The photocatalytic activities of the as-prepared hierarchical BiVO4 samples were measured for the photodegradation of Congo red aqueous dye solution under visible light irradiation. Surprisingly, the porous BiVO4 particles showed outstanding photocatalytic activities than polycrystalline BiVO4 sample. The possible enhancement of such catalytic performance has also been further discussed.

  17. Enrichment and Purification of Syringin, Eleutheroside E and Isofraxidin from Acanthopanax senticosus by Macroporous Resin

    Directory of Open Access Journals (Sweden)

    Yuangang Zu

    2012-07-01

    Full Text Available In order to screen a suitable resin for the preparative simultaneous separation and purification of syringin, eleutheroside E and isofraxidin from Acanthopanax senticosus, the adsorption and desorption properties of 17 widely used commercial macroporous resins were evaluated. According to our results, HPD100C, which adsorbs by the molecular tiers model, was the best macroporous resin, offering higher adsorption and desorption capacities and higher adsorption speed for syringin, eleutheroside E and isofraxidin than other resins. Dynamic adsorption and desorption tests were carried out to optimize the process parameters. The optimal conditions were as follows: for adsorption, processing volume: 24 BV, flow rate: 2 BV/h; for desorption, ethanol–water solution: 60:40 (v/v, eluent volume: 4 BV, flow rate: 3 BV/h. Under the above conditions, the contents of syringin, eleutheroside E and isofraxidin increased 174-fold, 20-fold and 5-fold and their recoveries were 80.93%, 93.97% and 93.79%, respectively.

  18. Purification of Houttuynia cordata Thunb. Essential Oil Using Macroporous Resin Followed by Microemulsion Encapsulation to Improve Its Safety and Antiviral Activity.

    Science.gov (United States)

    Pang, Jianmei; Dong, Wujun; Li, Yuhuan; Xia, Xuejun; Liu, Zhihua; Hao, Huazhen; Jiang, Lingmin; Liu, Yuling

    2017-02-15

    Essential oil extracted from Houttuynia cordata Thunb. (H. cordata) is widely used in traditional Chinese medicine due to its excellent biological activities. However, impurities and deficient preparations of the essential oil limit its safety and effectiveness. Herein, we proposed a strategy to prepare H. cordata essential oil (HEO) safely and effectively by combining the solvent extraction and the macroporous resin purification flexibly, and then encapsulating it using microemulsion. The extraction and purification process were optimized by orthogonal experimental design and adsorption-desorption tests, respectively. The average houttuynin content in pure HEO was then validated at 44.3% ± 2.01%, which presented a great potential for industrial application. Subsequently, pure HEO-loaded microemulsion was prepared by high-pressure homogenization and was then fully characterized. Results showed that the pure HEO-loaded microemulsion was successfully prepared with an average particle size of 179.1 nm and a high encapsulation rate of 94.7%. Furthermore, safety evaluation tests and in vitro antiviral testing indicated that the safety and activity of HEO were significantly improved after purification using D101 resin and were further improved by microemulsion encapsulation. These results demonstrated that the purification of HEO by macroporous resin followed by microemulsion encapsulation would be a promising approach for industrial application of HEO for the antiviral therapies.

  19. The effects of ionizing radiation on Reillex trademark HPQ, a new macroporous polyvinylpyridine resin, and on four conventional polystyrene anion exchange resins

    Energy Technology Data Exchange (ETDEWEB)

    Marsh, S.F.

    1990-11-01

    This study compares the effects of ionizing radiation on Reillex{trademark} HPQ, a recently available macroporous copolymer of 1-methyl-4-vinylpyridine/divinylbenzene, and on four conventional strong-base polystyrene anion exchange resins. The polystyrene resins investigated included one gel type, Dowex{trademark} 1 {times} 4, and three macroporous resins: Dow{trademark} MSA-1, Amberlite{trademark} IRA-900, and Lewatit{trademark} MP-500-FK. Each resin, in 7 M nitric acid, was subjected to seven different levels of {sup 60}Co gamma radiation ranging from 100 to 1000 megarads. Irradiated resins were measured for changes in dry weight, wet volume, chloride and Pu(IV) exchange capacities, and thermal stability. In separate experiments, each resin was subjected to approximately 340 megarads of in situ alpha particles from sorbed plutonium. Resin damage from alpha particles was less than half that caused by gamma rays, which may be a consequence of different production rates of radiolytic nitrite and nitro radicals in the two systems. Reillex{trademark} HPQ resin provided the greatest radiation stability, whereas Lewatit{trademark} MP-500-FK was the least stable of the resins tested. Thermogravimetric analyses of dry, nitrate-form resin revealed that dry Reillex{trademark} HPQ resin offered the best thermal stability for absorbed gamma doses to 370 megarads, but the worst thermal stability after exposures of 550 megarads or more. 25 refs., 11 figs., 13 tabs.

  20. Comparison of adsorption equilibrium of fructose, glucose and sucrose on potassium gel-type and macroporous sodium ion-exchange resins.

    Science.gov (United States)

    Nobre, C; Santos, M J; Dominguez, A; Torres, D; Rocha, O; Peres, A M; Rocha, I; Ferreira, E C; Teixeira, J A; Rodrigues, L R

    2009-11-03

    Adsorption equilibrium of fructose, glucose and sucrose was evaluated on sulfonated poly(styrene-co-divinylbenzene) cation-exchange resins. Two types of resins were used: potassium (K+) gel-type and sodium (Na+) macroporous resins. Influence of the cation and effect of the resin structure on adsorption were studied. The adsorption isotherms were determined by the static method in batch mode for mono-component and multi-component sugar mixtures, at 25 and 40 degrees C, in a range of concentrations between 5 and 250 g L(-1). All adsorption isotherms were fitted by a linear model in this range of concentrations. Sugars were adsorbed in both resins by the following order: fructose > glucose > sucrose. Sucrose was more adsorbed in the Na+ macroporous resin, glucose was identically adsorbed, and fructose was more adsorbed in the K+ gel-type resin. Data obtained from the adsorption of multi-component mixtures as compared to the mono-component ones showed a competitive effect on the adsorption at 25 degrees C, and a synergetic effect at 40 degrees C. The temperature increase conducted to a decrease on the adsorption capacity for mono-component sugar mixtures, and to an increase for the multi-component mixtures. Based on the selectivity results, K+ gel-type resin seems to be the best choice for the separation of fructose, glucose and sucrose, at 25 degrees C.

  1. Sucrose-assisted synthesis of three-dimensionally ordered macroporous CeO{sub 2} and its use as a support for promotional catalytic performance of CO oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Zhi, E-mail: zhiliu@lnnu.edu.cn; Tan, Xiuli; Lv, Cong

    2013-10-15

    In this work, several three-dimensionally ordered macroporous (3DOM) CeO{sub 2} having hierarchical pore structure were successfully prepared via a dual ‘hard-soft’ templating strategy using Ce(NO{sub 3}){sub 3}·6H{sub 2}O containing sucrose as the ceria precursor. The resulting CeO{sub 2} samples were characterized by N{sub 2} adsorption–desorption analysis, scanning electron microscopy, and transmission electron microscopy, which showed that the hierarchical 3DOM CeO{sub 2} possessed interconnected networks of the ordered macropore structures with large mesopores, and both the BET surface area and pore volume increased significantly compared with the conventional 3DOM CeO{sub 2}. The content of sucrose had a great effect on the textural parameters of the 3DOM CeO{sub 2}. The improved textural parameters should be attributed to the emergence of mesopores in the interconnected three-dimensional skeleton, which were formed by oxidative removal of carbon produced from carbonization of sucrose. The hierarchical 3DOM CeO{sub 2} exhibited a superior performance to the conventional 3DOM or bulk CeO{sub 2} when used as supports for Ir catalysts in CO oxidation.

  2. One-step direct synthesis of mesoporous aluminosilicates Al-SBA-15 with cage-like macropores by using micrometer-sized aluminum balls

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Ordered mesoporous aluminosilicate Al-SBA-15 materials with cage-like macropores have been synthesized by using micrometer-sized aluminum balls as an Al source,tetraethyl orthosilicate(TEOS) as a silica source,and triblock copolymer Pluronic P123 as a template.The resulting materials were fully characterized by XRD,N2 adsorption,SEM,TEM,ICP-AES,and 27Al MAS-NMR.The products(Al-SBA-15) have ordered two-dimensional(2-D) hexagonal mesostructures(space group p6mm).The calcined Al-SBA-15 materials exhibit disordered macropores with diameters of about 70―80 nm and ordered mesopores with a diameter of ~5 nm,a BET surface area of about 500 m2/g,Si/Al ratio of 40―80,and a ratio of tetrahedral Al to octahedral Al sites of about 2:1.This combination of properties gives these materials potential applications in areas such as adsorption,catalysis and separation.

  3. Separation and purification of neohesperidin from the albedo of Citrus reticulata cv. Suavissima by combination of macroporous resin and high-speed counter-current chromatography.

    Science.gov (United States)

    Zhang, Jiukai; Zhu, Xiaoyan; Luo, Fenglei; Sun, Chongde; Huang, Jianzhen; Li, Xian; Chen, Kunsong

    2012-01-01

    In this article, a simple and efficient protocol for rapid preparation and separation of neohesperidin from the albedo of Citrus reticulata cv. Suavissima was established by the combination of macroporous resin column chromatography and high-speed counter-current chromatography (HSCCC). Six types of resin were investigated by adsorption and desorption tests, and D101 macroporous resin was selected for the first cleaning-up procedure, in which 55% aqueous ethanol was used to elute neohesperidin. After treatment with D101 resin, the neohesperidin purity increased 11.83-fold from 4.92% in the crude extract to 58.22% in the resin-refined sample, with a recovery of 68.97%. The resin-refined sample was directly subjected to HSCCC purification with a two-phase solvent system composed of ethyl acetate-n-butanol-water (4:1:5, v/v), and 23.6 mg neohesperidin with 97.47% purity was obtained from 60 mg sample in only one run. The recovery of neohesperidin in HSCCC separation procedure was 65.85%. The chemical structure of the purified neohesperidin was identified by both HPLC and LC-MS. The established purification process will be helpful for further characterization and utilization of Citrus neohesperidin.

  4. Damping behavior of porous Cu with macropores%多孔铜的阻尼性能研究

    Institute of Scientific and Technical Information of China (English)

    王金香; 韩福生

    2012-01-01

    Porous Cu specimen was prepared by use of air infiltration process. The macropore diameter and porosity of the porous Cu is respectively 1,0 mm and up to 60%. The damping behavior was investigated by multifunction internal friction apparatus. The results show that the damping capacity of porous Cn is higher than that of bulk Cu. It' s also found that two IF peaks present at about 280 ℃ and 400 ℃ from the internal friction against temperature curves, and activation energy of the two IF peaks is 1.69 eV and 2. 30 eV respectively. TEM observation shows that a lot of dislocations exist near the matrix grain boundaries. Based on the experimental results, the high-temperature peak arises from the relaxation of grain boundaries, while the low-temperature peak may result from grain boundaries bond slip caused by the interaction of dislocation and grain boundaries .%运用空气加压渗流法制备了直径约1.0 mm、孔隙率高达60%的多孔铜样品,并利用多功能内耗仪对材料的阻尼行为进行了研究。结果表明,多孔铜的阻尼能力比致密铜的阻尼能力有了很大提高,同时在内耗-温度谱上发现有两个内耗峰,分别出现在280℃和400℃左右,激活能分别是1.69 eV和2.30 eV。TEM分析发现基体晶界附近存在大量的位错。经分析认为,低温峰起因于位错与晶界交互作用所引起的对晶界粘性滑移限制,高温峰则由晶界弛豫引起。

  5. Effect of Clay Content and Soil-water Potential On Mobilization and Leaching of Colloids In Unsaturated Macroporous Soil

    Science.gov (United States)

    Kjaergaard, C.; de Jonge, L. W.; Moldrup, P.

    The transport of strongly sorbed environmental contaminants may be enhanced due to sorption to mobile soil colloids. The most common source of mobile colloids in soil is the in-situ release of water-dispersible colloids (WDC), however experimental investigations of colloid mobilization in unsaturated macroporous soil are scarce. An understanding of the arrangement of colloids in aggregates, and the influence of clay on the development of the soil fabric and pore-size distributions is essential for the in- terpretation of colloid mobilization in soils. This emphasizes the important role of clay content, when evaluating the susceptibility of soils to release colloids and associated contaminants. This study was conducted to determine the effect of clay content and initial soil- water potential on colloid mobilization and leaching. Intact soil cores were sampled from an arable field at six locations along a naturally occurring texture gradient. Soil dispersibility was investigated using capillary saturation and drainage of field-moist packed aggregates. The amount of WDC in the soil was measured for each com- bination of clay content and initial soil-water potential (-2.5, -98 and -15530 hPa). Mobilization and leaching of colloids was investigated from unsaturated intact soil cores. The soils were irrigated at low intensity (1 mm/h), and effluent sampling was conducted at 5 cm tension. The results showed that colloid dispersion was significantly affected by both clay con- tent and initial soil-water potential. With a soil-water potential of -15530 hPa the col- loid release was generally low and no variation occurred between the soils. With in- creasing soil-water potential there was an increase in the amount of WDC for all soils. The increase in WDC was negatively correlated with clay content. The leaching of colloids from intact soil cores also decreased with increasing clay content at an ini- tial soil-water potential of -98 and -2.5 hPa, and no difference between

  6. 双模板作用下3DOM ZnO/ZrO2-TiO2(P123)的制备及表征%Preparation with dual templates of three-dimensionally ordered macroporous ZnO/ZrO2-TiO2

    Institute of Scientific and Technical Information of China (English)

    高万寿; 黄贤丹; 赵月红; 路露; 李莉

    2013-01-01

    Three-dimensionally ordered macroporous (3 DOM)composite ZnO/ZrO2-TiO2 was prepared by sol-gel method and post-processing method of calcination,using polystyrene (PS) latex sphere and triblock copolymer surfactant EO20PO70EO20 (P123) as dual templates.The phase compositions,structures and morphologies of 3DOM ZnO/ZrO2-TiO2 were well-characterized by FT-IR spectromete (FT-IR),Xray diffraction (XRD),N2 adsorption-desorption tests and scanning electron microscopy assisted X-ray energy dispersive spectroscopy (SEM-EDS).The results showed that the composites which were used with PS and P123 had anatase crystalline structure,and the macroporous structures were distributed neat and orderly,moreover,which had with an average pore diameter ca.100 nm and of BET surface area was 202.8 m2·g-1,and its pore wall was more well distribution.%同时在聚苯乙烯(PS)微球和三嵌段共聚物EO20PO70EO20(P123)双模板剂作用下,经溶胶-凝胶及煅烧后处理的方法制备了三维有序大孔(3DOM)复合材料ZnO/ZrO2-TiO2(P123).通过X射线衍射(XRD)、傅里叶-红外光谱(FT-IR)、扫描电子显微镜配合X射线能量色散谱仪(SEM-EDS)和N2吸附-脱附测定等测试手段对其元素组成、晶型结构、表面形貌以及表面物理化学性质等进行了表征.结果显示,经PS微球和P123双模板处理后的复合材料3DOM ZnO/ZrO2-TiO2(P123)主要晶型结构为锐钛矿,同时,三维空间的大孔结构排列规则、整齐而有序,其大孔平均直径约为100 nm,且复合材料的BET比表面积高达202.8 m2/g,大孔孔壁的介孔孔径分布也更加均一.

  7. Dual-templating synthesis of three-dimensionally ordered macroporous La(0.6)Sr(0.4)MnO3-supported Ag nanoparticles: controllable alignments and super performance for the catalytic combustion of methane.

    Science.gov (United States)

    Arandiyan, Hamidreza; Dai, Hongxing; Deng, Jiguang; Wang, Yuan; Xie, Shaohua; Li, Junhua

    2013-11-25

    Highly dispersed Ag nanoparticles supported on high-surface-area 3DOM La0.6Sr0.4MnO3 were successfully generated via the dimethoxytetraethylene glycol-assisted gas bubbling reduction route. The macroporous materials showed super catalytic performance for methane combustion.

  8. Porous calcium phosphate-poly (lactic-co-glycolic) acid composite bone cement: A viable tunable drug delivery system.

    Science.gov (United States)

    Roy, Abhijit; Jhunjhunwala, Siddharth; Bayer, Emily; Fedorchak, Morgan; Little, Steve R; Kumta, Prashant N

    2016-02-01

    Calcium phosphate based cements (CPCs) are frequently used as bone void fillers for non-load bearing segmental bone defects due to their clinically relevant handling characteristics and ability to promote natural bone growth. Macroporous CPC scaffolds with interconnected pores are preferred for their ability to degrade faster and enable accelerated bone regeneration. Herein, a composite CPC scaffold is developed using newly developed resorbable calcium phosphate cement (ReCaPP) formulation containing degradable microspheres of bio-compatible poly (lactic-co-glycolic acid) (PLGA) serving as porogen. The present study is aimed at characterizing the effect of in-vitro degradation of PLGA microspheres on the physical, chemical and structural characteristics of the composite cements. The porosity measurements results reveal the formation of highly interconnected macroporous scaffolds after degradation of PLGA microspheres. The in-vitro characterizations also suggest that the degradation by products of PLGA reduces the pH of the local environment thereby increasing the dissolution rate of the cement. In addition, the in-vitro vancomycin release from the composite CPC scaffold suggests that the drug association with the composite scaffolds can be tuned to achieve control release kinetics. Further, the study demonstrates control release lasting for longer than 10weeks from the composite cements in which vancomycin is encapsulated in PLGA microspheres.

  9. 大孔吸附树脂纯化鬼针草总黄酮的工艺优选%Optimization of Purification Technology for Total Flavonoids in Bidens bipinnata by Macroporous Adsorption Resin

    Institute of Scientific and Technical Information of China (English)

    瞿慧; 曹园; 方祝元; 刘志辉

    2013-01-01

    Objective To optimize purification technology of total flavonoids in Bidens bipinnata by macroporous resin. Method With adsorption rate and desorption rate of total flavonoids as indexes, adsorption property of six different kinds of macroporous resins for total flavonoids in B. bipinnata was compared by static adsorption and desorption experiments, in order to select optimum macroporous resin. Single factor test was used to investigate adsorption and elution conditions of macroporous resin. Result HPD400 macroporous resin presented the best effect of purification. Its optimum purification parameters were as followings:the sample concentration 0.5 g/L,pH 4,sample flow rate 2 BV/h,eluted with 9 BV 60%ethanol at 3 BV/h. After purification by macroporous resin, purity of total flavonoids in ethanol extract of B. bipinnata would be increased from 24.47%to 62.33%. Conclusion HPD400 macroporous resin was among the most suitable one for purification of total flavonoids in B. bipinnata. Optimized purification technology was stable and feasible.%目的:优选大孔树脂纯化鬼针草总黄酮的工艺条件。方法以鬼针草总黄酮的吸附率和洗脱率为指标,通过静态吸附试验比较不同种大孔树脂对鬼针草总黄酮的吸附能力,筛选出合适的大孔树脂型号;通过单因素试验优选鬼针草总黄酮的纯化工艺参数。结果 HPD400型大孔树脂纯化效果最好,其最佳工艺参数为药液中质量浓度0.5 mg/mL,pH=4.0,吸附速率2 BV/h,用9 BV 60%乙醇洗脱,洗脱速率3 BV/h,经大孔树脂纯化后鬼针草提取液中总黄酮纯度由原来的24.47%提高至58.41%。结论 HPD400型大孔树脂适用于鬼针草总黄酮的纯化,优选的纯化工艺稳定可行。

  10. Composite inorganic membranes containing nanoparticles of hydrated zirconium dioxide for electrodialytic separation.

    Science.gov (United States)

    Dzyazko, Yuliya S; Volfkovich, Yurii M; Sosenkin, Valentin E; Nikolskaya, Nadejda F; Gomza, Yurii P

    2014-01-01

    The aim of the work was to elucidate the nature of charge-selective properties of macroporous composite inorganic membranes modified with nanoparticles of hydrated zirconium dioxide. The membranes have been investigated using methods of standard contact porosimetry, potentiometry, electron microscopy and small-angle X-ray scattering. The ion exchanger has been found to deposit inside pores of ceramics. Differential curves of pore volume distribution have been resolved using Lorentz functions; each maximum has been related to structure elements of the matrix and ion exchanger by means of calculations according to homogeneous and heterogeneous geometrical models. It was found that the voids, the radius of which is 4 to 8 nm, are responsible for charge selectivity of the composite membranes. These pores are formed due to blocking of macropores of ceramics with aggregates of nanoparticles of the ion exchanger; the radius of these aggregates is 20 to 24 nm. The membranes were applied to desalination of the solution containing NaCl. The removal degree of the salt from the solution reached 95% and 9% for the composite and unmodified membranes, respectively.

  11. 大孔树脂分离纯化苦苣菜黄酮的工艺研究%Study on separation and purification of Sonchus oleraceus L total flavonoids by AB-8 macroporous resin with response surface analysis

    Institute of Scientific and Technical Information of China (English)

    安卓; 贾昌喜

    2012-01-01

    To study the purification conditions with macroporous resin in Sonchus culture. Using the static adsorption method for screening optimum macroporous resin to be purification of Sonchus oleraceus flavones, using dynamic adsorption method to study optimum macro-porous resin conditions of purification of Sonchus oleraceus flavonoid. Results the macroporous resin adsorption of AB-8 on Sonchus flavone was the best, the best purification conditions were; 3- 73% sample concentration, sample liquid rate of 3. 6 tnL / min, sample liquid pH was 5.18; by 78. 20% ethanol solution, with 120 mL(column volume) 2. 88 mL / min rate elution. Using macroporous adsorption resin AB8. under the optimum conditions, the adsorption rate is up to 84. 32% s desorption rate 91. 73%.%研究大孔树脂纯化苦苣菜黄酮的条件.利用静态吸附方法筛选纯化苦苣菜黄酮的最适大孔树脂,利用动态吸附方法研究最适大孔树脂纯化苦苣菜黄酮的条件.结果表明,大孔树脂AB-8对吸附苦苣菜黄酮的效果最好,最佳纯化条件:上样液浓度为3.73%,上样液速率为3.6 mL/min,上样液pH 5.18;用78.20%的乙醇溶液、以120 mL 2.88 mL/min的速率洗脱.利用大孔吸附树脂AB-8在上述最佳条件下,吸附率可达84.32%;解吸率91.73%.

  12. Removal of 2,4-dichlorophenol using cyclodextrin-ionic liquid polymer as a macroporous material: Characterization, adsorption isotherm, kinetic study, thermodynamics

    Energy Technology Data Exchange (ETDEWEB)

    Raoov, Muggundha [University of Malaya Centre for Ionic Liquids, Department of Chemistry, Faculty of Science, University of Malaya, Kuala Lumpur 50603 (Malaysia); Department of Chemistry, Faculty of Science, University of Malaya, Kuala Lumpur 50603 (Malaysia); Advanced Medical and Dental Institute, University of Science Malaysia, No. 1–8 (Lot 8), Persiaran Seksyen 4/1, Bandar Putra Bertam, Kepala Batas, Pulau Pinang 13200 (Malaysia); Mohamad, Sharifah, E-mail: sharifahm@um.edu.my [University of Malaya Centre for Ionic Liquids, Department of Chemistry, Faculty of Science, University of Malaya, Kuala Lumpur 50603 (Malaysia); Department of Chemistry, Faculty of Science, University of Malaya, Kuala Lumpur 50603 (Malaysia); Abas, Mohd Radzi [Department of Chemistry, Faculty of Science, University of Malaya, Kuala Lumpur 50603 (Malaysia)

    2013-12-15

    Highlights: • βCD-BIMOTs-TDI exhibits macropore size (77.66 nm) with 1.254 m{sup 2} g{sup −1} surface area. • Freundlich isotherm and pseudo-second order kinetics fit well the adsorption process. • Removal was optimum at pH 6 with 83% and reached equilibrium at 80 mg L{sup −1}. • Entropy (ΔS°) and heat of adsorption (ΔH°) estimated as −55.99 J/K mol and −18.10 J/mol. • Inclusion complex and π–π interaction were found to be dominant at pH 6. -- Abstract: Cyclodextrin-ionic liquid polymer (βCD-BIMOTs-TDI) was firstly synthesized using functionalized β-Cyclodextrin (CD) with 1-benzylimidazole (BIM) to form monofunctionalized CD (βCD-BIMOTs) and was further polymerized using toluene diisocyanate (TDI) linker to form insoluble βCD-BIMOTs-TDI. SEM characterization result shows that βCD-BIMOTs-TDI exhibits macropore size while the BET result shows low surface area (1.254 m{sup 2} g{sup −1}). The unique properties of the ILs allow us to produce materials with different morphologies. The adsorption isotherm and kinetics of 2,4-dichlorophenol (2,4-DCP) onto βCD-BIMOTs-TDI is studied. Freundlich isotherm and pseudo-second order kinetics are found to be the best to represent the data for 2,4-DCP adsorption on the βCD-BIMOTs-TDI. The presence of macropores decreases the mass transfer resistance and increases the adsorption process by reducing the diffusion distance. The change in entropy (ΔS°) and heat of adsorption (ΔH°) for 2,4-DCP on βCD-BIMOTs-TDI were estimated as −55.99 J/Kmol and −18.10 J/mol, respectively. The negative value of Gibbs free energy (ΔG°) indicates that the adsorption process is thermodynamically feasible, spontaneous and chemically controlled. Finally, the interactions between the cavity of βCD-BIMOTs and 2,4-DCP are investigated and the results shows that the inclusion of the complex formation and π–π interaction are the main processes involved in the adsorption process.

  13. Adsorption Mechanism of Macroporous Adsorption Resins%大孔吸附树脂的吸附机理

    Institute of Scientific and Technical Information of China (English)

    娄嵩; 刘永峰; 白清清; 邸多隆

    2012-01-01

    大孔吸附树脂(macroprous adsorption resin,MAR)是近几十年发展起来的一种具有多孔立体结构、人工合成的有机高分子聚合物。由于其特殊的理化性质和吸附性能,已被广泛应用于化学、医药、环保和食品等领域。本文介绍了近年来国内外对大孔吸附树脂在吸附机理研究方面的进展,重点介绍了不同温度条件下大孔吸附树脂对靶标分子的吸附热力学行为模式,靶标分子在大孔吸附树脂表面及孔内的吸附扩散行为模式。此外,大孔吸附树脂性能参数和靶标分子结构参数之间构效关系也对其吸附选择性规律具有重要的影响。因此,大孔吸附树脂与底物间构效关系的匹配程度及其对选择性的影响是大孔吸附树脂分离理论研究的核心。本文最后介绍了可以准确客观描述吸附过程并具有一定使用范围的大孔吸附树脂吸附模型的建立和评价。%Macroporous adsorption resins (MARs) , which are synthetic porous crosslinked polymer beads, have been developed into a kind of novel functional materials since 1950' They have widely been used in the fields such as pharmaceutical, chemical, food industries, and wastewater treatment. Besides the traditional research on applications of the commercial MARs in the enrichment process of target compound, some theoretical researches on the adsorption features of MARs are also introduced in this article, including adsorption isotherms, kinetics, driving forces, and interaction models. First, the adsorption isotherm patterns of target compound on MARs are discussed. Second, the diffusion patterns of targets on the surface and internal MARs are illustrated. The relationship between properties of MARs and structures of target compound effects the law of adsorption selection,and the investigation of this relationship is the key problem of theoretical research on separation and adsorption. Moreover, the ultimate purpose of

  14. Adsorption characteristics of rebaudioside A and stevioside on cross-linked poly(styrene-co-divinylbenzene) macroporous resins functionalized with chloromethyl, amino and phenylboronic acid groups.

    Science.gov (United States)

    Ye, Fayin; Yang, Ruijin; Hua, Xiao; Zhao, Guohua

    2014-09-15

    The adsorptive separation of each steviol glycoside from aqueous solutions by polymeric adsorbents has attracted a lot of interest in recent years. The adsorption properties of chloromethylated cross-linked poly(styrene-co-divinylbenzene) macroporous resins, functionalised with chloromethyl, amino and phenylboronic acid groups, towards rebaudioside A and stevioside were studied. The results revealed that the resins with amino and phenylboronic acid groups preferred to adsorb stevioside rather than rebaudioside A, and their adsorption kinetics fitted a pseudo-second-order model. Isothermal equilibrium curves of rebaudioside A and stevioside showed a good fitness with the Langmuir and Freundlich models. The adsorption of rebaudioside A and stevioside onto resins was a spontaneous and exothermic process as indicated by the negative values in free energy and enthalpy. Results from the resin-packed column demonstrated that an effluent rich in rebaudioside A (purity 98%) was obtained prior to the breakthrough point of stevioside.

  15. [Effects and mechanism on removing organics and reduction of membrane fouling using granular macro-porous anion exchange resin in drinking water treatment].

    Science.gov (United States)

    He, Huan; Dong, Bing-Zhi; Xu, Guang-Hong; Yan, Zhao-Hui

    2014-05-01

    A granular macro-porous anion exchange resin combined with coagulation was used as pretreatment of microfiltration membrane, and their effects and mechanism on removing organics and reduction of membrane fouling were evaluated. The results showed that resin could be effective in removing organics with medium and small molecular weight ( Mr) but ineffective in removing organics with large Mr, while couagulation could significantly remove organics with large Mr, with a limited removal for organics with medium and small Mr. Using resin alone as pretreatment could be effective in removal of organics but limited in reduction of membrane fouling. With combination of coagulation and resin as pretreatment of microfiltration, not only organics could be removed effectively, but also membrane fouling could be reduced.

  16. Preparative separation of polyphenols from water-soluble fraction of Chinese propolis using macroporous absorptive resin coupled with preparative high performance liquid chromatography.

    Science.gov (United States)

    Li, Aifeng; Xuan, Hongzhuan; Sun, Ailing; Liu, Renmin; Cui, Jichun

    2016-02-15

    In this study, a preparative separation method was developed for isolation of eleven polyphenols from water-soluble fraction of Chinese propolis using macroporous absorptive resin (MAR) coupled with preparative high performance liquid chromatography (PHPLC). Water-soluble fraction of Chinese propolis was first "prefractioned" using MAR, which yielded four subfractions. The four subfractions were then isolated by PHPLC with an isocratic elution of methanol-water. Finally, eleven polyphenols were purified from Chinese propolis including caffeic acid, ferulic acid, isoferulic acid, 3,4-dimethoxy cinnamic acid, pinobanksin, caffeic acid benzyl ester, caffeic acid phenethyl ester, apigenin, pinocembrin, chrysin and galangin. The purities of the compounds were determined by HPLC and the chemical structures were confirmed by UV and NMR analysis. The method developed was simple, effective, rapid, scalable and economical, and it was a promising basis for large-scale preparation of multiple components from natural products.

  17. Separation and purification of three stilbenes from the radix of Polygonum cillinerve (Nakai Ohwl by macroporous resin column chromatography combined with high-speed counter-current chromatography

    Directory of Open Access Journals (Sweden)

    Xiaofeng Chi

    2014-01-01

    Full Text Available An effective method for the rapid separation and purification of three stilbenes from the radix of Polygonum cillinerve (Nakai Ohwl by macroporous resin column chromatography combined with high-speed counter-current chromatography (HSCCC was successfully established. In the present study, a two-phase solvent system composed of chloroform-n-butanol-methanol-water (4:1:4:2, v/v/v/v was used for HSCCC separation. A one-step separation in 4 h from 150 mg of crude extract produced 26.3 mg of trans-resveratrol-3-O-glucoside, 42.0 mg of pieceid-2"-O-gallate, and 17.9 mg of trans-resveratrol with purities of 99.1%, 97.8%, and 99.4%, respectively, as determined by high-performance liquid chromatography (HPLC. The chemical structures of these compounds were identified by nuclear magnetic resonance (NMR spectroscopy.

  18. A miniaturized microbial fuel cell with three-dimensional graphene macroporous scaffold anode demonstrating a record power density of over 10 000 W m-3

    Science.gov (United States)

    Ren, Hao; Tian, He; Gardner, Cameron L.; Ren, Tian-Ling; Chae, Junseok

    2016-02-01

    A microbial fuel cell (MFC) is a bio-inspired renewable energy converter which directly converts biomass into electricity. This is accomplished via the unique extracellular electron transfer (EET) of a specific species of microbe called the exoelectrogen. Many studies have attempted to improve the power density of MFCs, yet the reported power density is still nearly two orders of magnitude lower than other power sources/converters. Such a low performance can primarily be attributed to two bottlenecks: (i) ineffective electron transfer from microbes located far from the anode and (ii) an insufficient buffer supply to the biofilm. This work takes a novel approach to mitigate these two bottlenecks by integrating a three-dimensional (3D) macroporous graphene scaffold anode in a miniaturized MFC. This implementation has delivered the highest power density reported to date in all MFCs of over 10 000 W m-3. The miniaturized configuration offers a high surface area to volume ratio and improved mass transfer of biomass and buffers. The 3D graphene macroporous scaffold warrants investigation due to its high specific surface area, high porosity, and excellent conductivity and biocompatibility which facilitates EET and alleviates acidification in the biofilm. Consequently, the 3D scaffold houses an extremely thick and dense biofilm from the Geobacter-enriched culture, delivering an areal/volumetric current density of 15.51 A m-2/31 040 A m-3 and a power density of 5.61 W m-2/11 220 W m-3, a 3.3 fold increase when compared to its planar two-dimensional (2D) control counterparts.A microbial fuel cell (MFC) is a bio-inspired renewable energy converter which directly converts biomass into electricity. This is accomplished via the unique extracellular electron transfer (EET) of a specific species of microbe called the exoelectrogen. Many studies have attempted to improve the power density of MFCs, yet the reported power density is still nearly two orders of magnitude lower than

  19. Synthese and characterization of boronic acid functionalized macroporous uniform poly(4-chloromethylstyrene-co-divinylbenzene) particles and its use in the isolation of antioxidant compounds from plant extracts.

    Science.gov (United States)

    Cetinkaya, Onur; Duru, Mehmet Emin; Ciçek, Hüseyin

    2012-11-15

    Aminophenyl boronic acid (APBA) carrying uniform-macroporous poly(chloromethylstyrene-co-divinylbenzene), poly(CMS-co-DVB) particles were synthesized for selective separation of cis-diol-containing flavonoids from plant extracts. For this purpose, 2.5 μm polystyrene seed particles were first swelled by a mixture of dibutyl phthalate (DBP), toluene and dodecanol, then by a monomer mixture including CMS and DVB. The repolymerization of the monomer phase in the swollen seed particles provided macroporous and uniform particles, approximately 7 μm in size. Chlorine atoms on the surface of these particles were derivatized with APBA to gain affinity properties for flavonoids containing vicinal hydroxyl groups. Model adsorption studies showed that these particles selectively adsorbed quercetin and rutin containing cis-diol groups, but did not adsorb apigenin similar to quercetin and not carrying cis-diol groups. These particles were also tested in adsorption/desorption studies for ethanol and ethyl acetate extracts of the Hypericum perforatum (HP) stems to obtain high antioxidant mixtures. With ethanol extract, the antioxidant activity of the desorption solution was a bit higher than that of the post-adsorption solutions. However, the DPPH radical scavenging activity of the desorption solution decreased with respect to the original extract and post-adsorption solutions. A similar result was obtained for the antioxidant activity of the desorption solution using ethyl acetate extract. An interesting result was obtained that DPPH radical scavenging activity of the post-adsorption solution was higher than that of the original ethyl acetate extract and desorption solutions. These results were attributed to selective adsorption of antioxidant characterized cis-diol-containing apolar molecules much more rather than that radical scavenger characterized polar molecules.

  20. Mechanism of Cu(II), Cd(II) and Pb(II) ions sorption from aqueous solutions by macroporous poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate)

    Energy Technology Data Exchange (ETDEWEB)

    Nastasović, Aleksandra B., E-mail: anastaso@chem.bg.ac.rs [University of Belgrade, Institute of Chemistry Technology and Metallurgy, Department of Chemistry, Department of Microelectronic Technologies, Njegoševa 12, Belgrade (Serbia); Ekmeščić, Bojana M. [University of Belgrade, Institute of Chemistry Technology and Metallurgy, Department of Chemistry, Department of Microelectronic Technologies, Njegoševa 12, Belgrade (Serbia); and others

    2016-11-01

    Highlights: • Macroporous PGME-deta sorption potential for Pb(II), Cd(II) and Cu(II) was studied. • Sorption kinetics obeyed pseudo-second order model. • Maximal Pb(II), Cd(II) and Cu(II) sorption capacities were 164, 152 and 120 mg g{sup −1}. • AFM indicates that metal sorption changes the size and morphology of PGME-deta. • XPS suggests complexation through the formation of Me−O and Me−N bonds in PGME-deta. - Abstract: The mechanism of Cu(II), Cd(II) and Pb(II) ions sorption from aqueous solutions by macroporous poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) (PGME) functionalized by reaction of the pendant epoxy groups with diethylene triamine (PGME-deta) was studied using X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis. Atomic force microscopy (AFM) and scanning energy-dispersive X-ray spectroscopy (SEM-EDX) were used for the determination of surface morphology of the copolymer particles. The sorption behavior of heavy metals Cu(II), Cd(II) and Pb(II) ions sorption was investigated in batch static experiments under non-competitive conditions at room temperature (298 K). The obtained results were fitted to pseudo-first order, pseudo-second order and intraparticle diffusion kinetic model. The kinetics studies showed that Cu(II), Cd(II) and Pb(II) sorption obeys the pseudo-second-order model under all investigated operating conditions with evident influence of pore diffusion.

  1. Purification of Raspberry Flavonoids Using Macro-porous Resin%大孔树脂纯化覆盆子黄酮的研究

    Institute of Scientific and Technical Information of China (English)

    张家瑞

    2013-01-01

    本实验采用大孔树脂对覆盆子黄酮进行分离纯化,确定其分离纯化条件,树脂的筛选实验结果和静态吸附动态学研究表明:所选的7种大孔树脂,AB-8树脂属于快速吸附树脂,吸附率和解吸率都很高,是理想用于覆盆子黄酮分离纯化的树脂,AB-8树脂动态吸附、解吸实验表明:当上样流速0.2 mL/min,上样浓度1.2 mg/mL,pH=4.5,用2.0 mL/min 70%的乙醇做解吸剂进行解吸时,覆盆子黄酮纯度可达到 40.32%,纯度提高7.16倍.%Raspberry flavonoids were isolated and purified by macro-porous resin in this article. The results showed that AB-8 resin can rapidly adsorbe lavonoids with higher adsorption and desorption rates than other macro-porous resin. Therefore, AB-8 resin was chosen as the best resion to isolate and purify raspberry flavonoids. Dynamic adsorption and desorption experiments showed that, when the sample flow rate, sample concentration, pH, desorption regent, desoption regent concentration and elution rate were 0.2 mL/min, 1.2 mg/mL, 4.5, ethanol, 70% and 2.0 mL/min, respectively, the raspberry flavonoids purity can reach 40.32%.

  2. Removal of 2,4-dichlorophenol using cyclodextrin-ionic liquid polymer as a macroporous material: characterization, adsorption isotherm, kinetic study, thermodynamics.

    Science.gov (United States)

    Raoov, Muggundha; Mohamad, Sharifah; Abas, Mohd Radzi

    2013-12-15

    Cyclodextrin-ionic liquid polymer (βCD-BIMOTs-TDI) was firstly synthesized using functionalized β-Cyclodextrin (CD) with 1-benzylimidazole (BIM) to form monofunctionalized CD (βCD-BIMOTs) and was further polymerized using toluene diisocyanate (TDI) linker to form insoluble βCD-BIMOTs-TDI. SEM characterization result shows that βCD-BIMOTs-TDI exhibits macropore size while the BET result shows low surface area (1.254 m(2)g(-1)). The unique properties of the ILs allow us to produce materials with different morphologies. The adsorption isotherm and kinetics of 2,4-dichlorophenol (2,4-DCP) onto βCD-BIMOTs-TDI is studied. Freundlich isotherm and pseudo-second order kinetics are found to be the best to represent the data for 2,4-DCP adsorption on the βCD-BIMOTs-TDI. The presence of macropores decreases the mass transfer resistance and increases the adsorption process by reducing the diffusion distance. The change in entropy (ΔS°) and heat of adsorption (ΔH°) for 2,4-DCP on βCD-BIMOTs-TDI were estimated as -55.99 J/Kmol and -18.10 J/mol, respectively. The negative value of Gibbs free energy (ΔG°) indicates that the adsorption process is thermodynamically feasible, spontaneous and chemically controlled. Finally, the interactions between the cavity of βCD-BIMOTs and 2,4-DCP are investigated and the results shows that the inclusion of the complex formation and π-π interaction are the main processes involved in the adsorption process.

  3. 大孔吸附树脂纯化甘草提取物中甘草酸的研究%Macroporous Adsorption Resin Purification of Glycyrrhizic Acid in Glycyrrhiza Extract Research

    Institute of Scientific and Technical Information of China (English)

    丁利营; 李红艳

    2014-01-01

    Objective To study the best macroporous resin purification process for Glycyrrhizic acid from glycyrrhiza glabra. Methods Glycyrrhizic acid content in macroporous resin purification as the investigation index, select the best macroporous resin from 24 kinds of macroporous resins for Glycyrrhizic acid from liquorice extract, and determine the optimum process conditions for this purification. Results AB-8 macroporous adsorption resin has the best purification ef ect for glycyrrhizic acid, and the optimum process conditions:liquorice extract concentration is 0.11mg/ml, diameter/height is 1:8, liquorice extract volume is 2 times of the resin, the rates of using liquorice extract and elution both are 2bv/h, remove impurities with 30%&50%ETOH, and accumulate glycyrrhizic acid by using 80%ETOH. After purification, the purity of the product is 60.74%, the yield rate is 3.29%, the transfer rate is 76.72%. Conclusion Using AB-8 macroporous adsorption resin can purify glycyrrhizic acid very wel .%目的研究光果甘草中甘草酸的最佳大孔树脂纯化工艺。方法以大孔吸附树脂纯化物中甘草酸的含量为考察指标,从24种大孔吸附树脂中筛选出纯化甘草粗提物中甘草酸的最佳大孔吸附树脂,并确定纯化甘草酸的最佳工艺条件。结果 AB-8大孔吸附树脂纯化甘草酸效果最佳,最佳工艺条件院上柱液浓度为0.11mg/mL,径高比为1:8,上样体积为所用树脂2BV,上样速度与洗脱速度均为2BV/h,用30%、50%的乙醇除杂,用80%乙醇富集甘草酸。纯化后产品纯度为60.74%,收率为3.29%,转移率为76.33%。结论采用AB-8大孔吸附树脂可较好地纯化甘草酸。

  4. Effects of apatite particle size in two apatite/collagen composites on the osteogenic differentiation profile of osteoblastic cells

    OpenAIRE

    HATAKEYAMA, WATARU; TAIRA, Masayuki; Chosa, Naoyuki; KIHARA, HIDEMICHI; ISHISAKI,Akira; KONDO, HISATOMO

    2013-01-01

    The development of new osteoconductive bone substitute materials is expected in medicine. In this study, we attempted to produce new hydroxylapatite (HAP)/collagen (Col) composites using two HAP particles of different sizes and porcine type I collagen. The two HAP particles were either nano-sized (40 nm in average diameter; n-HAP) or had macro-pore sizes of 0.5–1.0 mm in length with fully interconnected pores (m-HAP). The aim of this study was to investigate the effects of apatite particle si...

  5. Facile preparation of hierarchically porous diatomite/MFI-type zeolite composites and their performance of benzene adsorption: the effects of NaOH etching pretreatment.

    Science.gov (United States)

    Yu, Wenbin; Yuan, Peng; Liu, Dong; Deng, Liangliang; Yuan, Weiwei; Tao, Bo; Cheng, Hefa; Chen, Fanrong

    2015-03-21

    Hierarchically porous diatomite/MFI-type zeolite (Dt/Z) composites with excellent benzene adsorption performance were prepared. The hierarchical porosity was generated from the microporous zeolite coated at the surface of diatom frustules and from the macroporous diatomite support. A facile NaOH etching method was employed for the first time to treat the frustule support, followed by hydrothermal growth of MFI-type zeolite at the surface of frustules previously seeded with nanocrystalline silicalite-1 (Sil-1). NaOH etching enlarged the pores on diatom frustules and further increased the coated zeolite contents (W(z)). The central macropore size of the diatom frustules increased from approximately 200-500 nm to 400-1000 nm after NaOH etching. The W(z) could reach 61.2%, while the macroporosity of the composites was largely preserved due to more voids for zeolite coating being formed by NaOH etching. The Dt/Z composites exhibited higher benzene adsorption capacity per unit mass of zeolite and less mass transfer resistance than Sil-1, evaluated via a method of breakthrough curves. These results demonstrate that etching of a diatomite support is a facile but crucial process for the preparation of Dt/Z composites, enabling the resulting composites to become promising candidates for uses in volatile organic compounds emission control. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. High-capacity composite adsorbents for nucleic acids.

    Science.gov (United States)

    Tiainen, Peter; Rokebul Anower, M; Larsson, Per-Olof

    2011-08-05

    Cytopore™ is a bead-shaped, macroporous and easily compressible cellulose-based anion-exchange material intended for cultivation of anchor-dependent animal cells. Reticulated vitreous carbon (RVC) is a strong, non-compressible, high voidage (97%) matrix material that can be cut to desired geometrical shapes. Cytopore and RVC were combined to cylindrical composites (25 mm × 10 mm) fitted inside chromatography columns. The composite combined the advantageous properties of both its constituents, making it suitable for column chromatography. The composite could withstand very high flow rates without compaction of the bed (>25 column volumes/min; 4000 cm h(-1)). Chromatography runs with tracers showed a low HETP value (0.3mm), suggesting that pore flow was in operation. The dynamic binding capacities (10% breakthrough) per gram of dry weight Cytopore were determined for several compounds including DNA and RNA and were found to be 240-370 mg/g. The composite was used to isolate pUC 18-type plasmids from a cleared alkaline lysate in a good yield. Confocal microscopy studies showed that plasmids were bound not only to the surface of the Cytopore material but also within the matrix walls, thus offering an explanation to the very high binding capacities observed. The concept of using a composite prepared from a mechanically weak, high-binding material and a strong scaffold material may be applied to other systems as well.

  7. XDA-1 Macroporous Resin for Separation and Purification of Polyphenols Elaeagnus%XDA-1型大孔树脂对沙枣多酚分离纯化工艺研究

    Institute of Scientific and Technical Information of China (English)

    查培; 廉宜君; 杨金凤; 刘红

    2012-01-01

    通过动态吸附及解析试验,研究了XDA-1型大孔树脂对沙枣多酚的吸附及解析性能。试验结果表明,XDA-1型大孔树脂对沙枣的动态吸附率为73.42%,动态解析率为93.20%,是一种较好的分离沙枣多酚的树脂材料。%The dynamic adsorption and analysis of experiments, the XDA-1 macroporous resin adsorption of polyphenols angustifolia and parsing performance were studied. Experimental results showed that, XDA-1 macroporous resin adsorption rate of the dynamic angustifolia 73.42%, 93.20% rate of dynamic analysis was a better separation of polyphenols angustifolia resin material.

  8. A (Bio-Chemical Field-Effect Sensor with Macroporous Si as Substrate Material and a SiO2 / LPCVD-Si3N4 Double Layer as pH Transducer

    Directory of Open Access Journals (Sweden)

    Hans Lüth

    2002-01-01

    Full Text Available Macroporous silicon has been etched from n-type Si, using a vertical etching cell where no rear side contact on the silicon wafer is necessary. The resulting macropores have been characterised by means of Scanning Electron Microscopy (SEM. After etching, SiO2 was thermally grown on the top of the porous silicon as an insulating layer and Si3N4 was deposited by means of Low Pressure Chemical Vapour Deposition (LPCVD as transducer material to fabricate a capacitive pH sensor. In order to prepare porous biosensors, the enzyme penicillinase has been additionally immobilised inside the porous structure. Electrochemical measurements of the pH sensor and the biosensor with an Electrolyte/Insulator/Semiconductor (EIS structure have been performed in the Capacitance/Voltage (C/V and Constant capacitance (ConCap mode.

  9. Efficient extraction and preparative separation of four main isoflavonoids from Dalbergia odorifera T. Chen leaves by deep eutectic solvents-based negative pressure cavitation extraction followed by macroporous resin column chromatography.

    Science.gov (United States)

    Li, Lu; Liu, Ju-Zhao; Luo, Meng; Wang, Wei; Huang, Yu-Yan; Efferth, Thomas; Wang, Hui-Mei; Fu, Yu-Jie

    2016-10-15

    In this study, green and efficient deep eutectic solvent-based negative pressure cavitation-assisted extraction (DES-NPCE) followed by macroporous resin column chromatography was developed to extract and separate four main isoflavonoids, i.e. prunetin, tectorigenin, genistein and biochanin A from Dalbergia odorifera T. Chen leaves. The extraction procedure was optimized systematically by single-factor experiments and a Box-Behnken experimental design combined with response surface methodology. The maximum extraction yields of prunetin, tectorigenin, genistein and biochanin A reached 1.204, 1.057, 0.911 and 2.448mg/g dry weight, respectively. Moreover, the direct enrichment and separation of four isoflavonoids in DES extraction solution was successfully achieved by macroporous resin AB-8 with recovery yields of more than 80%. The present study provides a convenient and efficient method for the green extraction and preparative separation of active compounds from plants.

  10. Macroporous Resin Adsorption for Purification of Flavonoids in Houttuynia cordata Thunb%大孔吸附树脂精制鱼腥草黄酮类化合物

    Institute of Scientific and Technical Information of China (English)

    张颖; 李淑芬; 吴希文; 赵星

    2007-01-01

    Flavonoids are one main kind of effective components in Houttuynia cordata Thunb.,which display a wide range of pharmacological activity. In this study supercritical fluid extraction (SFE) with carbon dioxide was first used as preparation step to remove the volatile components,which are also active components,from Houttuynia cordata Thunb. Then ultrasound-assisted extraction was used to obtain the crude flavonoids and the macroporous resin adsorption technology was further employed to purify the flavonoids. Nine kinds of macroporous resins with different properties were tested through static adsorption,and one macroporous resin labeled as D101 was selected. The effect of several factors,such as the ratio of column height to diameter,initial concentration and pH,on both flavonoids yield and content were explored by dynamic adsorption to obtain reasonable conditions of adsorption and desorption. The experimental results show that the content of flavonoids can be above 60% with flavonoids recovery of 93.3 % under the optimum conditions of purification. HPLC analysis of the final flavonoids product shows it contains quercitrin,hyperin,rutin and quercetin.

  11. Functionalized macroporous copolymer of glycidyl methacrylate: The type of ligand and porosity parameters influence on Cu(II ion sorption from aqueous solutions

    Directory of Open Access Journals (Sweden)

    Sandić Zvjezdana P.

    2009-01-01

    Full Text Available The removal of heavy metals from hydro-metallurgical and other industries' wastewaters, their safe storage and possible recovery from waste- water streams is one of the greater ecological problems of modern society. Conventional methods, like precipitation, adsorption and biosorption, electrowinning, membrane separation, solvent extraction and ion exchange are often ineffective, expensive and can generate secondary pollution. On the other hand, chelating polymers, consisting of crosslinked copolymers as a solid support and functional group (ligand, are capable of selectively loading different metal ions from aqueous solutions. In the relatively simple process, the chelating copolymer is contacted with the contaminated solution, loaded with metal ions, and stripped with the appropriate eluent. Important properties of chelating polymers are high capacity, high selectivity and fast kinetics combined with mechanical stability and chemical inertness. Macroporous hydrophilic copolymers of glycidyl methacrylate and ethylene glycol dimethacrylate modified by different amines show outstanding efficiency and selectivity for the sorption of precious and heavy metals from aqueous solutions. In this study poly(GMA-co-EGDMA copolymers were synthesized with different porosity parameters and functionalized in reactions with ethylene diamine (EDA, diethylene triamine (DETA and triethylene tetramine (TETA. Under non-competitive conditions, in batch experiments at room temperature, the rate of sorption of Cu(II ions from aqueous solutions and the influence of pH on it was determined for four samples of amino-functionalized poly(GMA-co-EGDMA. The sorption of Cu(II for both amino-functionalized samples was found to be very rapid. The sorption half time, t1/2, defined as the time required to reach 50% of the total sorption capacity, was between 1 and 2 min. The maximum sorption capacity for copper (2.80 mmol/g was obtained on SGE-10/12-deta sample. The sorption

  12. Stable core/shell CdTe/Mn-CdS quantum dots sensitized three-dimensional, macroporous ZnO nanosheet photoelectrode and their photoelectrochemical properties.

    Science.gov (United States)

    Li, Weili; Sheng, Pengtao; Feng, Hongyan; Yin, Xuehua; Zhu, Xuewei; Yang, Xu; Cai, Qingyun

    2014-08-13

    A novel photoelectrode based on ZnS/CdTe/Mn-CdS/ZnS-sensitized three-dimensional macroporous ZnO nanosheet (NS) has been prepared by electrodeposition and successive ion layer adsorption and reaction (SILAR) method. The photoelectrode performances were significantly improved through the coupling of the core/shell CdTe/Mn-CdS quantum dots (QDs) with ZnO NS, and the introduction of the ZnS layer as a potential barrier. The photocurrent density systematically increases from ZnO NS (0.45 mA/cm(2)), CdTe/Mn-CdS/ZnO NS (4.98 mA/cm(2)), to ZnS/CdTe/Mn-CdS/ZnS/ZnO (6.23 mA/cm(2)) under the irradiation of AM 1.5G simulated sunlight. More important, the ZnS/CdTe/Mn-CdS/ZnS-sensitized ZnO NS photoelectrode provides a remarkable photoelectrochemical cell efficiency of 4.20% at -0.39 V vs Ag/AgCl.

  13. Simultaneously preparative purification of Huperzine A and Huperzine B from Huperzia serrata by macroporous resin and preparative high performance liquid chromatography.

    Science.gov (United States)

    Zhang, Hongchao; Liang, Hao; Kuang, Pengqun; Yuan, Qipeng; Wang, Yan

    2012-09-01

    Huperzine A (HupA) and Huperzine B (HupB) are natural alkaloids existed in Lycopodium plants. They both have potential clinical application for treating Alzheimer's Disease (AD). For the purpose of better utilizing the limited plant resources, a quick and low cost method to separate and purify HupA and HupB from Huperzia serrata (Thunb. ex Murray) was established in this paper. Low polarity macroporous resin SP850 was selected from eight kinds of resins during initial purification. Trifluoroacetic acid (TFA) was proved to be the best acid modifier reagent among all acids used in our experiment for improving separation. HupA and HupB were baseline separated on a C18 column by preparative high performance liquid chromatography (Preparative HPLC), the optimal gradient mobile phase system contained methanol increasing from 15% (v/v) to 35% (v/v) and 0.1% (v/v) TFA within the water. The purity of HupA and HupB obtained was 99.1% and 98.6%, respectively, and the total recovery for them was 83.0% and 81.8%, respectively.

  14. Enhancing sensitivity and selectivity of long-period grating sensors using structure-switching aptamers bound to gold-doped macroporous silica coatings.

    Science.gov (United States)

    Carrasquilla, Carmen; Xiao, Yao; Xu, Chang Qing; Li, Yingfu; Brennan, John D

    2011-10-15

    High surface area, sol-gel derived macroporous silica films doped with gold nanoparticles (AuNP) are used as a platform for high-density affinity-based immobilization of functional structure-switching DNA aptamer molecules onto Michelson interferometer long-period grating (LPG) fiber sensors, allowing for label-free detection of small molecular weight analytes such as adenosine triphosphate (ATP). The high surface area afforded by the sol-gel derived material allowed high loading of DNA aptamers, while the inclusion of gold nanoparticles within the silica film provided a high refractive index (RI) overlay, which is required to enhance the sensitivity of the LPG sensor according to our numerical simulations. By using a structure-switching aptamer construct that could release an oligonucleotide upon binding of ATP, the effective change in RI was both enhanced and inverted (i.e., binding of ATP caused a net reduction in molecular weight and refractive index), resulting in a system that prevented signals originating from nonspecific binding. This is the first report on the coupling of aptamers to LPG fiber sensors and the first use of high RI AuNP/silica films as supports to immobilize biomolecules onto the LPG sensor surface. The dual functionality of such films to both improve binding density and LPG sensor cladding refractive index results in a substantial enhancement in the sensitivity of such sensors for small molecule detection.

  15. Sorption of different phenol derivatives on functionalized macroporous nanocomposite of poly (glycidyl methacrylate-co-ethylene glycol dimethacrylate and acid modified bentonite

    Directory of Open Access Journals (Sweden)

    Marinović Sanja R.

    2014-01-01

    Full Text Available Macroporous nanocomposite of poly (glycidyl methacrylate-co-ethylene glycol dimethacrylate and acid modified bentonite was prepared by radical suspension copolymerization. Nanocomposite was functionalized with diethylene triamine (deta, by ring-opening reaction of the pendant epoxy groups. Functionalization was performed in order to enable phenol derivatives sorption. This new, not sufficiently investigated material, with developed porous structure was denoted CP-SA-deta. In this study, the influence of temperature on 4-nitrophenol (4NP sorption on CP-SA-deta was investigated. The chemisorption was estimated as dominant process since activation energy of sorption of 4NP of 54.8 kJ mol-1 was obtained. After determining the optimal sorption conditions for 4NP, the sorption of 2-nitrophenol (2NP and 2-chloro 4-nitrophenol (2Cl4NP on CP-SA-deta was investigated with respect to pH, initial concentration and contact time. The 2NP sorption was seldom tested, while according to our knowledge, the 2Cl4NP sorption was not investigated. The isotherm data were best fitted with Langmuir model, while the sorption dynamics obeyed the pseudo-second-order kinetic model for all derivatives. [Projekat Ministarstva nauke Republike Srbije, br. III 45001 i br. III 43009

  16. Separation of vitexin-4″-O-glucoside and vitexin-2″-O-rhamnoside from hawthorn leaves extracts using macroporous resins.

    Science.gov (United States)

    Li, Hongjuan; Liu, Ying; Jin, Haizhu; Liu, Sujing; Fang, Shengtao; Wang, Chunhua; Xia, Chuanhai

    2015-12-15

    Vitexin-4″-O-glucoside and vitexin-2″-O-rhamnoside are the major flavonoids of hawthorn leaves. In this work, the adsorption and desorption characteristics of vitexin-4″-O-glucoside and vitexin-2″-O-rhamnoside on seven macroporous resins were evaluated. Among the tested resins, the HPD-400 resin showed the best adsorption and desorption capacities. Adsorption isotherms were constructed for the HPD-400 resin and well fitted to Langmuir and Freundlich models. Dynamic adsorption and desorption tests were performed on column packed with the HPD-400 resin to optimize the chromatographic parameters. After one run treatment with the HPD-400 resin, the contents of vitexin-4″-O-glucoside and vitexin-2″-O-rhamnoside in the product were increased 8.44-fold and 8.43-fold from 0.720% and 2.63% to 6.08% and 22.2% with recovery yields of 79.1% and 81.2%, respectively. These results show that the developed method is a promising basis for the large-scale purification of vitexin-4″-O-glucoside and vitexin-2″-O-rhamnoside from hawthorn leaves and other plant materials.

  17. Performance of nitrogen-containing macroporous carbon supported cobalt catalyst synthesized through in-situ construction of catalytic sites for oxygen reduction reaction

    Science.gov (United States)

    He, Fan; Yang, Jun; Li, Rui; Liu, Bin Hong; Li, Zhou Peng

    2015-01-01

    A novel method of in-situ catalytic site (CoNx) construction in macroporous carbon (MPC) is developed. The nitrogen-containing MPC-supported cobalt (Co/N-MPC) catalysts are synthesized via the pyrolysis of a mixture of glucose-urea resin, nano-CaCO3, and cobalt nitrate. The nano-CaCO3 functions as a template to fabricate MPC that provides high electric conductivity and large specific surface area. The catalytic CoNx sites are simultaneously created during the formation of N-MPC. The use of glucose-urea resin as the carbon and nitrogen sources significantly increases the nitrogen content as high as 8.8 at% in the MPC. The synthesized Co/N-MPC demonstrates superb catalytic activity toward oxygen reduction reaction. The direct borohydride fuel cell using the Co/N-MPC shows a power density as high as 170 mW cm-2 which is much higher than the cell using 10 wt.% Pt/C but slightly lower than the cell using 20 wt.% Pt/C as the cathode catalyst at ambient conditions.

  18. Preliminary extraction of tannins by 1-butyl-3-methylimidazole bromide and its subsequent removal from Galla chinensis extract using macroporous resins.

    Science.gov (United States)

    Lu, Chunxia; Luo, Xiaoling; Lu, Liliang; Li, Hongmin; Chen, Xia; Ji, Yong

    2013-03-01

    In recent years, ionic liquids have become increasingly attractive as 'green solvents' used in the extraction of bioactive compounds from natural plant. However, the separation of ionic liquid from the target compounds was difficult, due to their low vapour pressure and high stabilities. In our study, ionic liquid-based ultrasonic and microwave-assisted extraction was used to obtain the crude tannins, then the macroporous resin adsorption technology was further employed to purify the tannins and remove the ionic liquid from crude extract. The results showed that XDA-6 had higher separation efficiency than other tested resins, and the equilibrium experimental data were well fitted to Langmuir isotherms. Dynamic adsorption and desorption were performed on XDA-6 packed in glass columns to optimise the separation process. The optimum conditions as follows: the ratio of column height to diameter bed was 1:8, flow rate 1 BV/h (bed volume per hour), 85% ethanol was used as eluant while the elution volume was 2 BV. Under the optimised conditions, the adsorption and desoption rate of tannins in XDA-6 were 94.81 and 91.63%, respectively. The content of tannins was increased from 70.24% in Galla chinensis extract to 85.12% with a recovery of 99.06%. The result of ultra-performance liquid chromatography (UPLC)-MS/MS analysis showed that [bmim]Br could be removed from extract.

  19. Evaluation of the Early In Vivo Response of a Functionally Graded Macroporous Scaffold in an Osteochondral Defect in a Rabbit Model.

    Science.gov (United States)

    Barron, Valerie; Neary, Martin; Mohamed, Khalid Merghani Salid; Ansboro, Sharon; Shaw, Georgina; O'Malley, Grace; Rooney, Niall; Barry, Frank; Murphy, Mary

    2016-05-01

    Cartilage tissue engineering is a multifactorial problem requiring a wide range of material property requirements from provision of biological cues to facilitation of mechanical support in load-bearing diarthrodial joints. The study aim was to design, fabricate and characterize a template to promote endogenous cell recruitment for enhanced cartilage repair. A polylactic acid poly-ε-caprolactone (PLCL) support structure was fabricated using laser micromachining technology and thermal crimping to create a functionally-graded open pore network scaffold with a compressive modulus of 9.98 ± 1.41 MPa and a compressive stress at 50% strain of 8.59 ± 1.35 MPa. In parallel, rabbit mesenchymal stem cells were isolated and their growth characteristics, morphology and multipotency confirmed. Sterilization had no effect on construct chemical structure and cellular compatibility was confirmed. After four weeks implantation in an osteochondral defect in a rabbit model to assess biocompatibility, there was no evidence of inflammation or giant cells. Moreover, acellular constructs performed better than cell-seeded constructs with endogenous progenitor cells homing through microtunnels, differentiating to form neo-cartilage and strengthening integration with native tissue. These results suggest, albeit at an early stage of repair, that by modulating the architecture of a macroporous scaffold, pre-seeding with MSCs is not necessary for hyaline cartilage repair.

  20. Two solid-phase recycling method for basic ionic liquid [C4mim]Ac by macroporous resin and ion exchange resin from Schisandra chinensis fruits extract.

    Science.gov (United States)

    Ma, Chun-hui; Zu, Yuan-gang; Yang, Lei; Li, Jian

    2015-01-22

    In this study, two solid-phase recycling method for basic ionic liquid (IL) 1-butyl-3-methylimidazolium acetate ([C4mim]Ac) were studied through a digestion extraction system of extracting biphenyl cyclooctene lignans from Schisandra chinensis. The RP-HPLC detection method for [C4mim]Ac was established in order to investigate the recovery efficiency of IL. The recycling method of [C4mim]Ac is divided into two steps, the first step was the separation of lignans from the IL solution containing HPD 5000 macroporous resin, the recovery efficiency and purity of [C4mim]Ac achieved were 97.8% and 67.7%, respectively. This method cannot only separate the lignans from [C4mim]Ac solution, also improve the purity of lignans, the absorption rate of lignans in [C4mim]Ac solution was found to be higher (69.2%) than that in ethanol solution (57.7%). The second step was the purification of [C4mim]Ac by the SK1B strong acid ion exchange resin, an [C4mim]Ac recovery efficiency of 55.9% and the purity higher than 90% were achieved. Additionally, [C4mim]Ac as solvent extraction of lignans from S. chinensis was optimized, the hydrolysis temperature was 90°C and the hydrolysis time was 2h.

  1. Mechanism of Cu(II), Cd(II) and Pb(II) ions sorption from aqueous solutions by macroporous poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate)

    Science.gov (United States)

    Nastasović, Aleksandra B.; Ekmeščić, Bojana M.; Sandić, Zvjezdana P.; Ranđelović, Danijela V.; Mozetič, Miran; Vesel, Alenka; Onjia, Antonije E.

    2016-11-01

    The mechanism of Cu(II), Cd(II) and Pb(II) ions sorption from aqueous solutions by macroporous poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) (PGME) functionalized by reaction of the pendant epoxy groups with diethylene triamine (PGME-deta) was studied using X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis. Atomic force microscopy (AFM) and scanning energy-dispersive X-ray spectroscopy (SEM-EDX) were used for the determination of surface morphology of the copolymer particles. The sorption behavior of heavy metals Cu(II), Cd(II) and Pb(II) ions sorption was investigated in batch static experiments under non-competitive conditions at room temperature (298 K). The obtained results were fitted to pseudo-first order, pseudo-second order and intraparticle diffusion kinetic model. The kinetics studies showed that Cu(II), Cd(II) and Pb(II) sorption obeys the pseudo-second-order model under all investigated operating conditions with evident influence of pore diffusion.

  2. In vitro mechanical fatigue behavior of poly-ɛ-caprolactone macroporous scaffolds for cartilage tissue engineering: Influence of pore filling by a poly(vinyl alcohol) gel.

    Science.gov (United States)

    Panadero, J A; Vikingsson, L; Gomez Ribelles, J L; Lanceros-Mendez, S; Sencadas, V

    2015-07-01

    Polymeric scaffolds used in regenerative therapies are implanted in the damaged tissue and submitted to repeated loading cycles. In the case of articular cartilage engineering, an implanted scaffold is typically subjected to long-term dynamic compression. The evolution of the mechanical properties of the scaffold during bioresorption has been deeply studied in the past, but the possibility of failure due to mechanical fatigue has not been properly addressed. Nevertheless, the macroporous scaffold is susceptible to failure after repeated loading-unloading cycles. In this work fatigue studies of polycaprolactone scaffolds were carried by subjecting the scaffold to repeated compression cycles in conditions simulating the scaffold implanted in the articular cartilage. The behavior of the polycaprolactone sponge with the pores filled with a poly(vinyl alcohol) gel simulating the new formed tissue within the pores was compared with that of the material immersed in water. Results were analyzed with Morrow's criteria for failure and accurate fittings are obtained just up to 200 loading cycles. It is also shown that the presence of poly(vinyl alcohol) increases the elastic modulus of the scaffolds, the effect being more pronounced with increasing the number of freeze/thawing cycles.

  3. Synthesis and Efficiency of a Spherical Macroporous Epoxy-dicyandiamide Chelate Resin for Preconcentrating and Separating Trace Au, Hg, Pd and Ru from Samples

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A novel spherical macroporous epoxy-dicyandiamide chelate resin was synthesized simply and rapidly from epoxy resin and used for the preconcentration and separation of trace amounts of Au( Ⅲ ), Hg (Ⅱ ), Pd ( Ⅳ ) and Ru ( Ⅲ ) ions from solution samples. The analyzed ions can be quantitatively concentrated by the resin at a flow rate of 2.0 mL/min at pH 4, and can also be desorbed with 15 mL of 4 mol/L HCl+0.3 g thiourea from the resin column with recoveries of 96.5%-99.0%. After the chelate resin was reused for 7 times, the recoveries of these ions were still over 92%, and 400-1 000 times of excess of Fe( Ⅲ ), Al( Ⅲ ), Ni( Ⅱ ), Mn( Ⅱ ), Cr ( Ⅲ ), Cu ( Ⅱ ), Cd ( Ⅱ ) and Pb( Ⅱ ) caused little interference with the determination of these ions by an inductively coupled plasma optical emission spectrometer (ICP-OES). The capacities of the resin for the analytes are in the range of 0.35~0.92 mmol/g. The RSDs of the proposed method are in the range of 1.1%~4.0% for each kind of the analyzed ions. The recoveries of a standard added in real solution samples are between 96.5 % and 98. 5 %, and the results for the analyzed ions in a powder sample are in good agreement with their reported values.

  4. Meso-macroporous Fe-doped CuO:Synthesis, characterization, and structurally enhanced adsorption and visible-light photocatalytic activity

    Institute of Scientific and Technical Information of China (English)

    朱剑飞; 肖奇

    2015-01-01

    The meso-macroporous Fe-doped CuO was prepared by a simple hydrothermal method combined with post-annealing. The samples were characterized by X-ray powder diffraction(XRD), scanning electron microscopy(SEM), Brunauer−Emmett−Teller N2 adsorption−desorption analyses and UV-vis diffuses reflectance spectroscopy. The Fe-doped CuO sample shows higher adsorption capacity and photocatalytic activity for xanthate degradation than pure CuO under visible light irradiation. In addition, the adsorption process is found to fit Langmuir isotherms and pseudo-second-order kinetics. The the first order kinetic Langmuir Hinshelwood model was used to study the reaction kinetics of photocatalytic degradation, and the apparent rate constant (k ) was calculated. The value ofk for Fe-doped CuO is 1.5 times that of pure CuO. The higher photocatalytic activity of Fe-doped CuO is attributed to higher specific surface area together with stronger visible light absorption.

  5. Layer-by-layer assembly of graphene oxide on polypropylene macroporous membranes via click chemistry to improve antibacterial and antifouling performance

    Science.gov (United States)

    Zhang, Zhen-Bei; Wu, Jing-Jing; Su, Yu; Zhou, Jin; Gao, Yong; Yu, Hai-Yin; Gu, Jia-Shan

    2015-03-01

    Polypropylene is an extensively used membrane material; yet, polypropylene membranes exhibit extremely poor resistance to protein fouling. To ameliorate this issue, graphene oxide (GO) nanosheets were used to modify macroporous polypropylene membrane (MPPM) via layer-by-layer assembly technique through click reaction. First, alkyne-terminated GO was prepared through esterification between carboxyl groups in GO and amide groups in propargylamine; azide-terminated GO was synthesized by the ring-opening reaction of epoxy groups in GO with sodium azide. Second, GO was introduced to the membrane by click chemistry. Characterizations of infrared spectra and X-ray photoelectron spectroscopy confirmed the modification. The sharply decreasing of static water contact angle indicated the improvement of the surface hydrophilicity for GO modified membrane. Introducing GO to the membrane results in a dramatic increase of water flux, improvements in the antifouling characteristics and antibacterial property for the membranes. The pure water flux through the 5-layered GO modified membrane is 1.82 times that through the unmodified one. The water flux restores to 43.0% for the unmodified membrane while to 79.8% for the modified membrane. The relative flux reduction decreases by 32.1% due to GO modification. The antibacterial property was also enhanced by two-thirds. These results demonstrate that the antifouling and antibacterial characteristics can be raised by tethering GO to the membrane surface.

  6. TiO2 thick films supported on reticulated macroporous Al2O3 foams and their photoactivity in phenol mineralization

    Science.gov (United States)

    Vargová, Melinda; Plesch, Gustav; Vogt, Ulrich F.; Zahoran, Miroslav; Gorbár, Michal; Jesenák, Karol

    2011-03-01

    TiO2 thick films deposited on macroporous reticulated Al2O3 foams with pore size of 10 ppi and 15 ppi were prepared using dip coating from slurries of Aeroxide® P25 nanopowder and precipitated titania. All prepared films have sufficiently good adhesion to the surface of the substrate also in case of strongly cracked films. No measurable release of deposited TiO2 after repeated photocatalytic cycles was observed. The photocatalytic activity was characterized as the rate of mineralization of aqueous phenol solution under irradiation of UVA light by TOC technique. The best activity was obtained with Aeroxide® P25 coated Al2O3 foam with the pore size of 10 ppi, annealed at 600 °C. The optimal annealing temperature for preparation of films from precipitated titania could be determined at 700 °C. Films prepared by sol-gel deposition technique were considerably thinner compared to coatings made of suspensions and their photocatalytic activity was significantly smaller.

  7. Separation of isorhamnetin 3-sulphate and astragalin from Flaveria bidentis (L.) Kuntze using macroporous resin and followed by high-speed countercurrent chromatography.

    Science.gov (United States)

    Shaheen, Nusrat; Yin, Li; Gu, Yanxiang; Rwigimba, Eric; Xie, Qianqian; Wei, Yun

    2015-06-01

    D4020 resin offered the best dynamic adsorption and desorption capacity for total flavonoids based on the research results from ten kinds of macroporous resin. A column packed with D4020 resin was used to optimize the separation of total flavonoids from Flaveria bidentis (L.) Kuntze extracts. The content of flavonoids in the product was increased from 4.3 to 30.1% with a recovery yield of 90%. After the treatment with gradient elution on D4020 resin, the contents of isorhamnetin 3-sulfate and astragalin were increased from 0.49 to 8.70% with a recovery yield of 74.1% and 1.16 to 30.8%, with a recovery yield of 92.2%, respectively. Further purification was carried out by one-run high-speed countercurrent chromatography yielding 4.5 mg of isorhamnetin 3-sulfate at a high purity of 96.48% and yielding 24.4 mg of astragalin at a high purity of over 98.46%.

  8. Synthesis and Characterization of β-Cyclodextrin Functionalized Ionic Liquid Polymer as a Macroporous Material for the Removal of Phenols and As(V

    Directory of Open Access Journals (Sweden)

    Muggundha Raoov

    2013-12-01

    Full Text Available β-Cyclodextrin-ionic liquid polymer (CD-ILP was first synthesized by functionalized β-cyclodextrin (CD with 1-benzylimidazole (BIM to form monofunctionalized CD (βCD-BIMOTs and was further polymerized using a toluene diisocyanate (TDI linker to form insoluble CD-ILP (βCD-BIMOTs-TDI. The βCD-BIMOTs-TDI polymer was characterized using various tools and the results obtained were compared with those derived from the native β-cyclodextrin polymer (βCD-TDI. The SEM result shows that the presence of ionic liquid (IL increases the pore size, while the thermo gravimetric analysis (TGA result shows that the presence of IL increases the stability of the polymer. Meanwhile, Brunauer-Emmett-Teller (BET results show that βCD-BIMOTs-TDI polymer has 1.254 m2/g surface areas and the Barret-Joyner-Halenda (BJH pore size distribution result reveals that the polymer exhibits macropores with a pore size of 77.66 nm. Preliminary sorption experiments were carried out and the βCD-BIMOTs-TDI polymer shows enhanced sorption capacity and high removal towards phenols and As(V.

  9. Synthesis and characterization of β-cyclodextrin functionalized ionic liquid polymer as a macroporous material for the removal of phenols and As(V).

    Science.gov (United States)

    Raoov, Muggundha; Mohamad, Sharifah; Abas, Mhd Radzi

    2013-12-23

    β-Cyclodextrin-ionic liquid polymer (CD-ILP) was first synthesized by functionalized β-cyclodextrin (CD) with 1-benzylimidazole (BIM) to form monofunctionalized CD (βCD-BIMOTs) and was further polymerized using a toluene diisocyanate (TDI) linker to form insoluble CD-ILP (βCD-BIMOTs-TDI). The βCD-BIMOTs-TDI polymer was characterized using various tools and the results obtained were compared with those derived from the native β-cyclodextrin polymer (βCD-TDI). The SEM result shows that the presence of ionic liquid (IL) increases the pore size, while the thermo gravimetric analysis (TGA) result shows that the presence of IL increases the stability of the polymer. Meanwhile, Brunauer-Emmett-Teller (BET) results show that βCD-BIMOTs-TDI polymer has 1.254 m(2)/g surface areas and the Barret-Joyner-Halenda (BJH) pore size distribution result reveals that the polymer exhibits macropores with a pore size of 77.66 nm. Preliminary sorption experiments were carried out and the βCD-BIMOTs-TDI polymer shows enhanced sorption capacity and high removal towards phenols and As(V).

  10. Phenolic Profiling of Duchesnea indica Combining Macroporous Resin Chromatography (MRC with HPLC-ESI-MS/MS and ESI-IT-MS

    Directory of Open Access Journals (Sweden)

    Mingzhi Zhu

    2015-12-01

    Full Text Available Duchesnea indica (D. indica is an important traditional Chinese medicine, and has long been clinically used to treat cancer in Asian countries. It has been described previously as a rich source of phenolic compounds with a broad array of diversified structures, which are the major active ingredients. However, an accurate and complete phenolic profiling has not been determined yet. In the present work, the total phenolic compounds in crude extracts from D. indica were enriched and fractionated over a macroporous resin column, then identified by HPLC-ESI-MS/MS and ESI-IT-MS (ion trap MS. A total of 27 phenolic compounds were identified in D. indica, of which 21 compounds were identified for the first time. These 27 phenolic compounds encompassing four phenolic groups, including ellagitannins, ellagic acid and ellagic acid glycosides, hydroxybenzoic acid and hydroxycinnamic acid derivatives, and flavonols, were then successfully quantified using peak areas against those of the corresponding standards with good linearity (R2 > 0.998 in the range of the tested concentrations. As a result, the contents of individual phenolic compounds varied from 6.69 mg per 100 g dry weight (DW for ellagic acid to 71.36 mg per 100 g DW for brevifolin carboxylate. Not only did this study provide the first phenolic profiling of D. indica, but both the qualitative identification and the subsequent quantitative analysis of 27 phenolic compounds from D. indica should provide a good basis for future exploration of this valuable medicinal plant.

  11. Isolation and purification of six iridoid glycosides from gardenia jasminoides fruit by medium-pressure liquid chromatography combined with macroporous resin chromatography.

    Science.gov (United States)

    Wang, Yun; Liu, Hui; Shen, Lifeng; Yao, Lan; Ma, Yinlian; Yu, Dingrong; Chen, Jianhong; Li, Puling; Chen, Ying; Zhang, Cun

    2015-12-01

    Gardeniae fructus is one of the most frequently used herbs in traditional Chinese medicine. In the present study, a process for the enrichment of six iridoid glycosides from Gardeniae fructus was developed using medium-pressure liquid chromatography combined with macroporous resin and reversed-phase chromatography. The purities of different fractions from Gardeniae fructus were assessed using quantitative high-performance liquid chromatography. After fractionation using HPD-100 column chromatography, a 30% ethanol fraction was selected based on high-performance liquid chromatography and liquid chromatography with mass spectrometry qualitative analysis to separate and purify. Based on the orientation analysis results, six compounds-deacetyl asperulosidic acid methyl ester, gardenoside, ixoroside, scandoside methyl ester, genipin-1-O-β-d-gentiobioside, and geniposide-were successfully isolated and purified in three to four combined steps from Gardeniae fructus. The purities of these compounds were found by high-performance liquid chromatography analysis to be 97.9, 98.1, 95.5, 96.3, 97.1, and 98.7%, respectively. Moreover, their structures were elucidated by NMR spectroscopy and liquid chromatography with tandem mass spectrometry. The separation process was highly efficient, rapid, and accurate, making it a potential approach for the large-scale production of iridoids in the laboratory and providing several marker compounds for quality control. This procedure may be meaningful for the purification of other natural products used in traditional Chinese medicine.

  12. Synthesis and anti-fungal effect of silver nanoparticles–chitosan composite particles

    Science.gov (United States)

    Wang, Lung-Shuo; Wang, Chih-Yu; Yang, Chih-Hui; Hsieh, Chen-Ling; Chen, Szu-Yu; Shen, Chi-Yen; Wang, Jia-Jung; Huang, Keng-Shiang

    2015-01-01

    Silver nanoparticles have been used in various fields, and several synthesis processes have been developed. The stability and dispersion of the synthesized nanoparticles is vital. The present article describes a novel approach for one-step synthesis of silver nanoparticles–embedded chitosan particles. The proposed approach was applied to simultaneously obtain and stabilize silver nanoparticles in a chitosan polymer matrix in-situ. The diameter of the synthesized chitosan composite particles ranged from 1.7 mm to 2.5 mm, and the embedded silver nanoparticles were measured to be 15±3.3 nm. Further, the analyses of ultraviolet-visible spectroscopy, energy dispersive spectroscopy, and X-ray diffraction were employed to characterize the prepared composites. The results show that the silver nanoparticles were distributed over the surface and interior of the chitosan spheres. The fabricated spheres had macroporous property, and could be used for many applications such as fungicidal agents in the future. PMID:25878501

  13. A Novel FCC Catalyst Based on a Porous Composite Material Synthesized via an In Situ Technique

    Directory of Open Access Journals (Sweden)

    Shu-Qin Zheng

    2015-11-01

    Full Text Available To overcome diffusion limitations and improve transport in microporous zeolite, the materials with a wide-pore structure have been developed. In this paper, composite microspheres with hierarchical porous structure were synthesized by an in situ technique using sepiolite, kaolin and pseudoboehmite as raw material. A novel fluid catalytic cracking (FCC catalyst for maximizing light oil yield was prepared based on the composite materials. The catalyst was characterized by XRD, FT-IR, SEM, nitrogen adsorption-desorption techniques and tested in a bench FCC unit. The results indicated that the catalyst had more meso- and macropores and more acid sites than the reference catalyst, and thus can increase light oil yield by 1.31 %, while exhibiting better gasoline and coke selectivity.

  14. Inverse opal hydrogel-collagen composite scaffolds as a supportive microenvironment for immune cell migration.

    Science.gov (United States)

    Stachowiak, Agnieszka N; Irvine, Darrell J

    2008-06-01

    Immunotherapies harness the inherent potential of the body to destroy foreign or infected cells, and are currently being investigated as treatments for cancer. One way to boost native immune responses might be to engineer ectopic lymphoid tissue, providing a supportive microenvironment for immune cell priming, and/or bringing together immune cells at a desired location (e.g., solid tumor sites). Here we describe the development and in vitro testing of composite macroporous poly(ethylene glycol) (PEG) hydrogel scaffolds infused with collagen as a tissue engineering platform for immunotherapy. The PEG hydrogel with ordered, interconnected pores provided mechanical stability and the potential to depot supporting cytokines/chemokines, while an infused collagen matrix supported intra-scaffold migration of loaded T cells and dendritic cells. Rapid, nearly unconstrained T cell migration through scaffolds was achieved by using inverse opal supporting structures with 80 microm macropores. In addition, we demonstrated that the lymphoid tissue chemokine CCL21 could be bound to the inverse opal gel walls of these scaffolds, to provide motility-inducing cues for T cells within these structures. This hybrid scaffold approach combines the strengths of the synthetic and biopolymer hydrogels used in a highly synergistic fashion, allowing each material to compensate for limiting properties of its partner. Copyright 2007 Wiley Periodicals, Inc.

  15. Hepatotoxic microcystin removal using pumice embedded monolithic composite cryogel as an alternative water treatment method.

    Science.gov (United States)

    Gurbuz, Fatma; Ceylan, Şeyda; Odabaşı, Mehmet; Codd, Geoffrey A

    2016-03-01

    Microcystins are the most commonly encountered water-borne cyanotoxins which present short- and long-term risks to human health. Guidelines at international and national level, and legislation in some countries, have been introduced for the effective health risk management of these potent hepatotoxic, tumour-promoters. The stable cyclic structure of microcystins and their common production by cyanobacteria in waterbodies at times of high total dissolved organic carbon content presents challenges to drinking water treatment facilities, with conventional, advanced and novel strategies under evaluation. Here, we have studied the removal of microcystins using three different forms of pumice particles (PPs), which are embedded into macroporous cryogel columns. Macroporous composite cryogel columns (MCCs) are a new generation of separation media designed to face this challenging task. Three different MCCs were prepared by adding plain PPs, Cu(2+)-attached PPs and Fe(3+)-attached PPs to reaction media before the cryogelation step. Column studies showed that MCCs could be successfully used as an alternative water treatment method for successful microcystin removal.

  16. 三维有序大孔Ag/ZrO2-TiO2:制备及紫外光催化降解染料和水杨酸性能%Three-Dimensionally Ordered Macroporous Ag/ZrO2-TiO2: Preparation and UV Photocatalytic Activity for Dyes and Salicylic Acid Degradation

    Institute of Scientific and Technical Information of China (English)

    李莉; 赵月红; 路露; 马慧媛; 刘波

    2012-01-01

    采用聚苯乙烯(PS)微球作为模板剂,经溶胶-凝胶及煅烧后处理的方法制备了三维有序大孔(3DOM)复合材料Ag/ZrO2-TiO2.通过FTIR、XRD、XPS、N2吸附-脱附和SEM-EDS等对其进行了表征.结果显示,经PS微球作用后的复合材料Ag/ZrO2-TiO2具有锐钛矿晶型结构,其Ag以单质形式存在.该复合材料的孔结构高度有序,属三维有序大孔,平均孔直径为120 nm,孔壁由紧密堆积的Ag/ZrO2-TiO2纳米晶粒组成,孔收缩率约为40%.该复合材料表现出较好的紫外光催化降解水杨酸和甲基橙等染料性能,其活性明显高于商用光催化剂(Degussa P-25)、Ag/ZrO2-TiO2和3DOM ZrO2-TiO2,在90 min内对甲基橙的降解率达80.1%.%Three-dimensionally ordered macroporous (3D0M) composite Ag/ZrO2-TiO2 was prepared by the sol-gel method using a polystyrene (PS) latex sphere as the template. The title material was characterized by FTIR, XRD, XPS, TEM, N2 adsorption-desorption and SEM-EDS. The results show that the title composite Ag/ZrOrTiO2 is in anatase crystalline structure, and the silver species in the Ag/ZrO2-TiO2 is metallic Ag°. The composite material is in 3DOM structure with an average pore diameter of 120 nm. The pore wall is closely stacked by the Ag/ZrOrTiO2 nanocrystals, and the macroporous shrinkage rate is ca.40%. The Results for photocatalytic degradation of dye and salicylic acid under UV light irradiaton show that the activity of 3D0M Ag/ZrO2-TiO2 is better than that of Degussa P-25, Ag/ZrO2-TiO2and 3D0M ZrO2TiO2, and the degradation rate of methyl orange is 80.1% within 90 min.

  17. Formation of macroporous gel morphology by phase separation in the silica sol-gel system containing nonionic surfactant

    Institute of Scientific and Technical Information of China (English)

    Junsheng Wu; Xiaogang Li; Wei Du; Hua Chen

    2005-01-01

    The phase separation and gel formation behavior in an alkoxy-derived silica sol-gel system containing Ci6EOi5 has been investigated. Various gel morphologies similar to other sol-gel systems containing organic additives were obtained by changing the preparation conditions. Micrometer-range interconnected porous gels were obtained by freezing transitional structures of phase separation in the sol-gel process. The dependence of the resulting gel morphology on several important reaction parameters such as the starting composition, reaction temperature and acid catalyst concentration was studied in detail. The experimental results indicate that the gel morphology is mainly determined by the time relation between the onset of phase separation and gel formation.

  18. Electrocatalyst compositions

    Science.gov (United States)

    Mallouk, Thomas E.; Chan, Benny C.; Reddington, Erik; Sapienza, Anthony; Chen, Guoying; Smotkin, Eugene; Gurau, Bogdan; Viswanathan, Rameshkrishnan; Liu, Renxuan

    2001-09-04

    Compositions for use as catalysts in electrochemical reactions are described. The compositions are alloys prepared from two or more elemental metals selected from platinum, molybdenum, osmium, ruthenium, rhodium, and iridium. Also described are electrode compositions including such alloys and electrochemical reaction devices including such catalysts.

  19. Composition: PHHS

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2012-01-01

    PHHS is an open composition to be realised by improvising musicians. See more about my composition practise in the entry "Composition - General Introduction". This work is licensed under a Creative Commons "by-nc" License. You may for non-commercial purposes use and distribute it, performance...

  20. Fabrication and biocompatibility of poly(L-lactic acid) and chitosan composite scaffolds with hierarchical microstructures

    Energy Technology Data Exchange (ETDEWEB)

    Lou, Tao, E-mail: taolou72@aliyun.com [College of Chemistry and Chemical Engineering, Qingdao University, Qingdao 266071 (China); Wang, Xuejun [College of Chemistry and Chemical Engineering, Qingdao University, Qingdao 266071 (China); Yan, Xu [College of Physics & Collaborative Innovation Center for Low-Dimensional Nanomaterials and Optoelectronic Devices, Qingdao University, Qingdao 266071 (China); Miao, Yu [Department of Mechanical Engineering, Columbia University, New York, NY 10027 (United States); Long, Yun-Ze, E-mail: yunzelong@163.com [College of Physics & Collaborative Innovation Center for Low-Dimensional Nanomaterials and Optoelectronic Devices, Qingdao University, Qingdao 266071 (China); Yin, Hai-Lei [Department of Osteology, No. 401 Hospital of P. L. A., Qingdao 266071 (China); Sun, Bin [College of Physics & Collaborative Innovation Center for Low-Dimensional Nanomaterials and Optoelectronic Devices, Qingdao University, Qingdao 266071 (China); Song, Guojun [College of Chemistry and Chemical Engineering, Qingdao University, Qingdao 266071 (China)

    2016-07-01

    The scaffold microstructure is crucial to reconstruct tissue normal functions. In this article, poly(L-lactic acid) and chitosan fiber (PLLA/CTSF) composite scaffolds with hierarchical microstructures both in fiber and pore sizes were successfully fabricated by combining thermal induced phase separation and salt leaching techniques. The composite scaffolds consisted of a nanofibrous PLLA matrix with diameter of 50–500 nm, and chitosan fibers with diameter of about 20 μm were homogenously distributed in the PLLA matrix as a microsized reinforcer. The composite scaffolds also had high porosity (> 94%) and hierarchical pore size, which were consisted of both micropores (50 nm–10 μm) and macropores (50–300 μm). By tailoring the microstructure and chemical composition, the mechanical property, pH buffer and protein adsorption capacity of the composite scaffold were improved significantly compared with those of PLLA scaffold. Cell culture results also revealed that the PLLA/CTSF composite scaffolds supported MG-63 osteoblast proliferation and penetration. - Highlights: • Composite scaffolds fabricated by combining thermal induced phase separation and salt leaching techniques • Hierarchical microstructure both in fiber and pore sizes • The scaffold microenvironment facilitates the protein adsorption, cell proliferation and penetration.

  1. Polymer/Ceramic Composite Membranes and Their Application in Pervaporation Process

    Institute of Scientific and Technical Information of China (English)

    刘公平; 卫旺; 金万勤; 徐南平

    2012-01-01

    Pervaporation (PV), as an environmental friendly and energy-saving separation technology, has been received increasing attention in recent years. This article reviews the preparation and application of macroporous ceramic-supported polymer composite pervaporation membranes. The separation materials of polymer/ceramic composite membranes presented here include hydrophobic polydimethylsiloxane (PDMS) and hydrophilic poly(vinyl alcohol) (PVA), chitosan (CS) and polyelectrolytes. The effects of ceramic support treatment, polymer solution properties, interfacial adhesion and incorporating or blending modification on the membrane structure and PV performance are discussed. Two in-situ characterization methods developed for polymer/ceramic composite membranes are also covered in the discussio.n. The.applications of these composite_membranesi_n_ pervaporation process are summarized as well, which contain the bio-fuels recovery, gasoline desulfuration and PV coupled process using PDMS/ceramic composite membrane, and dehydration of alcohols and esters using ceramic-supported PVA or PVA-CS composite membrane. Finally, a brief conclusion remark on polymer/ceramic composite mem- branes is given and possible future research is outlined.

  2. Nitrogen-doped 3D macroporous graphene frameworks as anode for high performance lithium-ion batteries

    Science.gov (United States)

    Liu, Xiaowu; Wu, Ying; Yang, Zhenzhong; Pan, Fusen; Zhong, Xiongwu; Wang, Jiaqing; Gu, Lin; Yu, Yan

    2015-10-01

    Nitrogen-doped 3D graphene frameworks (N-3D GFs) were synthesized by a facile two-step method: Polystyrene (PS) encapsulated in graphene oxide (GO) composites (denoted as PS@GO) are first synthesized, followed by a post-thermal annealing in ammonia step to get N-doped 3D GFs. The resulting N-3D GFs inherit the advantages of graphene, which possesses high electrical conductivity and high specific surface area. Furthermore, the well-defined 3D interconnected structure can facilitate the access of the electrolyte to the electrode surface, thus shortening the diffusion length of both Li+/e-, keeping the overall electrode highly conductive and active in lithium storage. Simultaneously, the in-situ formation of pyridinic N and pyrrolic N in 3D GFs provide high electronic conductivity and structure stability for lithium storage. The designed N-3D GFs electrode delivers a high specific capacity of 1094 mAhg-1 after 100 cycles at 200 mAg-1 and superior rate capability (691 mAhg-1 after 500 cycles at 1000 mAg-1) when used as anode for LIBs. We believe that such an inherently inexpensive, scalable, facile method can significantly increase the feasibility of building high performance energy storage system.

  3. Novel resorbable glass-ceramic scaffolds for hard tissue engineering: from the parent phosphate glass to its bone-like macroporous derivatives.

    Science.gov (United States)

    Bretcanu, Oana; Baino, Francesco; Verné, Enrica; Vitale-Brovarone, Chiara

    2014-05-01

    One of the major challenges of hard tissue engineering research focuses on the development of scaffolds that can match the mechanical properties of the host bone and resorb at the same rate as the bone is repaired. The aim of this work was the synthesis and characterization of a resorbable phosphate glass, as well as its application for the fabrication of three dimensional (3-D) scaffolds for bone regeneration. The glass microstructure and behaviour upon heating were analysed by X-ray diffraction, differential scanning calorimetry and hot stage microscopy. The glass solubility was investigated according to relevant ISO standards using distilled water, simulated body fluid (SBF) and Tris-HCl as testing media. The glass underwent progressive dissolution over time in all three media but the formation of a hydroxyapatite-like layer was also observed on the samples soaked in SBF and Tris-HCl, which demonstrated the bioactivity of the material. The glass powder was used to fabricate 3-D macroporous bone-like glass-ceramic scaffolds by adopting polyethylene particles as pore formers: during thermal treatment, the polymer additive was removed and the sintering of glass particles was allowed. The obtained scaffolds exhibited high porosity (87 vol.%) and compressive strength around 1.5 MPa. After soaking for 4 months in SBF, the scaffolds mass loss was 76 wt.% and the pH of the solution did not exceed the 7.55 value, thereby remaining in a physiological range. The produced scaffolds, being resorbable, bioactive, architecturally similar to trabecular bone and exhibiting interesting mechanical properties, can be proposed as promising candidates for bone repair applications.

  4. Design and Evaluation of a Three Dimensionally Ordered Macroporous Structure within a Highly Patterned Cylindrical Sn-Ni Electrode for Advanced Lithium Ion Batteries

    Directory of Open Access Journals (Sweden)

    Yongcheng Jin

    2013-01-01

    Full Text Available A 3-dimensionally ordered macroporous (3DOM structure within a highly patterned cylindrical Sn-Ni alloy electrode was tailored by using various monodispersed polystyrene (PS templates via a colloidal crystal templating process coupled with an electroplating process. The pore size and the wall thickness in the “inverse opal” 3DOM structure were increased with increasing the size of the PS template beads used in this study. The electrochemical performance of prepared electrodes was examined in order to reveal the correlation between the rate capability and the 3DOM structure. Except the electrode with 1.2 μm pores, the discharge capacities gradually decreased with increasing the current density, showing a capacity conservation ratio of 87% for the electrode with 0.5 μm pores and that of 84% for the electrode with 3.0 μm pores when the current density increased from 0.05 mA cm−2 to 2.0 mA cm−2. The reason for this difference is attributed to the fact that the wall thickness of less than 0.5 μm in the electrode with 1.2 μm pores has a short Li+ diffusion distance in solid-state walls. In addition, it is expected that high regularity of 3DOM structure plays a great role on rate capability. Consequently, the 3DOM structure prepared from 1.2 μm PS template beads was favorable for improving the rate capability.

  5. Layer-by-layer assembly of graphene oxide on polypropylene macroporous membranes via click chemistry to improve antibacterial and antifouling performance

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Zhen-Bei, E-mail: 1021453457@qq.com [The Key Laboratory of Functional Molecular Solids, Ministry of Education, Anhui Key Laboratory of Molecular-Based Materials, College of Chemistry and Materials Science, Anhui Normal University, East Beijing Rd. 1, Wuhu, Anhui 241000 (China); Wu, Jing-Jing, E-mail: 957522275@qq.com [The Key Laboratory of Functional Molecular Solids, Ministry of Education, Anhui Key Laboratory of Molecular-Based Materials, College of Chemistry and Materials Science, Anhui Normal University, East Beijing Rd. 1, Wuhu, Anhui 241000 (China); Su, Yu, E-mail: 819388710@qq.com [The Key Laboratory of Functional Molecular Solids, Ministry of Education, Anhui Key Laboratory of Molecular-Based Materials, College of Chemistry and Materials Science, Anhui Normal University, East Beijing Rd. 1, Wuhu, Anhui 241000 (China); Zhou, Jin, E-mail: zhoujin_ah@163.com [Department of Materials and Chemical Engineering, Chizhou University, Muzhi Rd. 199, Chizhou, Anhui 247000 (China); Gao, Yong, E-mail: 154682180@qq.com [School of Chemistry and Environmental Engineering, Jiangsu University of Technology, Changzhou 213001 (China); Yu, Hai-Yin, E-mail: yhy456@mail.ahnu.edu.cn [The Key Laboratory of Functional Molecular Solids, Ministry of Education, Anhui Key Laboratory of Molecular-Based Materials, College of Chemistry and Materials Science, Anhui Normal University, East Beijing Rd. 1, Wuhu, Anhui 241000 (China); Gu, Jia-Shan, E-mail: jiashanG@mail.ahnu.edu.cn [The Key Laboratory of Functional Molecular Solids, Ministry of Education, Anhui Key Laboratory of Molecular-Based Materials, College of Chemistry and Materials Science, Anhui Normal University, East Beijing Rd. 1, Wuhu, Anhui 241000 (China)

    2015-03-30

    Graphical abstract: - Highlights: • Clickable membrane prepared by photo bromination and S{sub N}2 nucleophilic substitution. • Azide graphene oxide prepared by ring-opening reaction. • Alkyne graphene oxide was prepared via esterification reaction. • Layer-by-layer assembly of graphene oxide on membrane by click chemistry. • Antibacterial and antifouling characteristics were enhanced greatly. - Abstract: Polypropylene is an extensively used membrane material; yet, polypropylene membranes exhibit extremely poor resistance to protein fouling. To ameliorate this issue, graphene oxide (GO) nanosheets were used to modify macroporous polypropylene membrane (MPPM) via layer-by-layer assembly technique through click reaction. First, alkyne-terminated GO was prepared through esterification between carboxyl groups in GO and amide groups in propargylamine; azide-terminated GO was synthesized by the ring-opening reaction of epoxy groups in GO with sodium azide. Second, GO was introduced to the membrane by click chemistry. Characterizations of infrared spectra and X-ray photoelectron spectroscopy confirmed the modification. The sharply decreasing of static water contact angle indicated the improvement of the surface hydrophilicity for GO modified membrane. Introducing GO to the membrane results in a dramatic increase of water flux, improvements in the antifouling characteristics and antibacterial property for the membranes. The pure water flux through the 5-layered GO modified membrane is 1.82 times that through the unmodified one. The water flux restores to 43.0% for the unmodified membrane while to 79.8% for the modified membrane. The relative flux reduction decreases by 32.1% due to GO modification. The antibacterial property was also enhanced by two-thirds. These results demonstrate that the antifouling and antibacterial characteristics can be raised by tethering GO to the membrane surface.

  6. A Continuous Procedure Based on Column Chromatography to Purify Anthocyanins from Schisandra chinensis by a Macroporous Resin plus Gel Filtration Chromatography.

    Science.gov (United States)

    Yue, Daran; Yang, Lei; Liu, Shouxin; Li, Jian; Li, Wei; Ma, Chunhui

    2016-02-06

    In our previous study, as natural food colorants and antioxidants, the color and content stabilities of Schisandra chinensis (S. chinensis) anthocyanins were investigated. In this work, the purification process parameters of S. chinensis anthocyanins using a macroporous resin and gel filtration chromatography were evaluated. The optimized parameters of static adsorption and desorption were as follows. The selected resin is HPD-300 (nonpolar copolymer styrene type resin), and the anthocyanins adsorption saturation capacity of HPD-300 resin was 0.475 mg/g dry resin. Adsorption time was 4 h, and 0.517 mg/mL of S. chinensis anthocyanins was adsorbed on the resin column with a flow rate of 39 mL/h (3 BV/h). After adsorption, the anthocyanins were completely desorpted with 2.5 BV of 90% (v/v) ethanol solution, and the desorption flow rate was 13 mL/h (1 BV/h). After purification by dynamic adsorption and desorption, the anthocyanins content in the effluent increased from 47.6 mg/g to 128.4 mg/g, the purity of anthocyanins increased six-fold from 5.08% to 30.43%, and the anthocyanins recovery was 96.5%. The major constituent of S. chinensis anthocyanins was isolated with Bio-Gel P2 gel filtration chromatography, and it was detected by liquid chromatography electrospray ionisation tandem mass spectrometry (LC-ESI-MS) as cyanidin-3-O-xylosylrutinoside. Moreover, the antioxidant activities of S. chinensis anthocyanins were investigated. After purification using the HPD-300 resin, the antioxidant activities of anthocyanins were increased 1.2-fold (FRAP) and 1.7-fold (ABTS).

  7. Realtime infiltration process monitoring in macroporous soil - a plot-scale experiment accompanied by high-resolution time-lapse 3D GPR

    Science.gov (United States)

    Jackisch, Conrad; Allroggen, Niklas

    2016-04-01

    Infiltration and quick vertical redistribution of event water through rapid subsurface flow in soil structures is one of the key issues in hydrology. Although the importance of preferential flow is broadly recognised, our theories, observation techniques and modelling approaches lose grounds when the assumption of well-mixed states in REVs collapses. To characterise the combination of advective and diffusive flow is especially challenging. We have shown in earlier studies that a combination of TDR monitoring, dye- and salt-tracer recovery and time-lapse 3D GPR in irrigation experiments provides means to characterise infiltration dynamics at the plot- and hillslope-scale also in highly structured soils. We pinpointed that the spatial and temporal resolution requires special attention and improvement - particularly owing to the facts of high velocity (10-3 ms-1) of advective flow and small scale (10-2 m) of the respective flow structures. We present insights from a novel technique of continuous high-resolution time-lapse 3D GPR measurements during and after a plot-scale (1 m x 1 m) irrigation experiment. Continuous TDR soil moisture measurements, dye tracer excavation and salt-tracer samples are used as qualitative and quantitative references. While classical infiltration experiments either look at spatial patterns or temporal dynamics at singular gauges, we highlight the advantage of combining both to achieve a more complete image of the infiltration process. Although operating at the limits of the techniques this setup enables non-invasive observation of preferential flow processes in the field and allows to explore and characterise macropore matrix exchange.

  8. Ionic Liquid-Based Vacuum Microwave-Assisted Extraction Followed by Macroporous Resin Enrichment for the Separation of the Three Glycosides Salicin, Hyperin and Rutin from Populus Bark

    Directory of Open Access Journals (Sweden)

    Fengli Chen

    2014-07-01

    Full Text Available An effective ionic liquid vacuum microwave-assisted method was developed for extraction of the thermo- and oxygen-sensitive glycosides salicin, hyperin and rutin from Populus bark due to the strong solvating effects of ionic liquids on plant cell walls. In this study, [C4mim]BF4 solution was selected as the extracting solution for extraction of the target analytes. After optimization by single factor experiments and response surface methodology, the optimum condition parameters were achieved, which included 1.0 M [C4mim]BF4, 2 h soaking time, −0.08 MPa vacuum, 20 min microwave irradiation time, 400 W microwave irradiation power and 25 mL/g liquid/solid ratio. Under the optimum conditions, higher extraction yields of salicin (35.53 mg/g, hyperin (1.32 mg/g and rutin (2.40 mg/g were obtained. Compared with other extraction methods, the developed method provided higher yields of the three target components after a relatively shorter extraction time (20 min. No obvious degradation of the target analytes was observed under the optimum conditions in performed stability studies and the proposed method had a high reproducibility. Meanwhile, after adsorption and desorption on macroporous D101 resin, the target analytes can be effectively separated from the [C4mim]BF4 ionic liquid extraction solution and the yields of salicin, hyperin and rutin were 89%, 82% and 84%, respectively. The recovered [C4mim]BF4 ionic liquid presented a good extraction effect on the three analytes after recycling five times.

  9. Ionic liquid-based vacuum microwave-assisted extraction followed by macroporous resin enrichment for the separation of the three glycosides salicin, hyperin and rutin from Populus bark.

    Science.gov (United States)

    Chen, Fengli; Mo, Kailin; Liu, Zhaizhi; Yang, Fengjian; Hou, Kexin; Li, Shuangyang; Zu, Yuangang; Yang, Lei

    2014-07-07

    An effective ionic liquid vacuum microwave-assisted method was developed for extraction of the thermo- and oxygen-sensitive glycosides salicin, hyperin and rutin from Populus bark due to the strong solvating effects of ionic liquids on plant cell walls. In this study, [C4mim]BF4 solution was selected as the extracting solution for extraction of the target analytes. After optimization by single factor experiments and response surface methodology, the optimum condition parameters were achieved, which included 1.0 M [C4mim]BF4, 2 h soaking time, -0.08 MPa vacuum, 20 min microwave irradiation time, 400 W microwave irradiation power and 25 mL/g liquid/solid ratio. Under the optimum conditions, higher extraction yields of salicin (35.53 mg/g), hyperin (1.32 mg/g) and rutin (2.40 mg/g) were obtained. Compared with other extraction methods, the developed method provided higher yields of the three target components after a relatively shorter extraction time (20 min). No obvious degradation of the target analytes was observed under the optimum conditions in performed stability studies and the proposed method had a high reproducibility. Meanwhile, after adsorption and desorption on macroporous D101 resin, the target analytes can be effectively separated from the [C4mim]BF4 ionic liquid extraction solution and the yields of salicin, hyperin and rutin were 89%, 82% and 84%, respectively. The recovered [C4mim]BF4 ionic liquid presented a good extraction effect on the three analytes after recycling five times.

  10. Macroporous graphene capped Fe3O4 for amplified electrochemiluminescence immunosensing of carcinoembryonic antigen detection based on CeO2@TiO2.

    Science.gov (United States)

    Yang, Lei; Zhu, Wenjuan; Ren, Xiang; Khan, Malik Saddam; Zhang, Yong; Du, Bin; Wei, Qin

    2017-05-15

    A novel electrochemiluminescence (ECL) signal-amplified immunosensing strategy was proposed by using gold nanoparticles (Au NPs) functionalized reduced graphene oxide (rGO) capped Fe3O4 (Au-FrGO). In this work, CeO2@TiO2 was prepared by a sol-gel method to wrap CeO2 with TiO2. In the presence of CeO2, CeO2@TiO2 exhibited better ECL activity than TiO2 with peroxydisulfate as coreactant. In addition, FrGO with macroporous structure was synthesized by self-assembly of rGO sheets capped cationic Fe3O4 nanoparticles, exhibiting larger specific surface area than rGO. Due to the low toxicity and magnetism of Fe3O4, FrGO owned more favorable biocompatibility and the application of magnetic-separation simplified the preparation procedure. After hybridizing with Au NPs, FrGO exhibited more excellent electrical conductivity and could immobilize more CeO2@TiO2 and antibodies. Therefore, a novel label-free ECL immunosensor based on Au-FrGO-CeO2@TiO2 was constructed which generated higher ECL response. To investigate the performance of the immunosensor, carcinoembryonic antigen (CEA) was chosen as a model target analyte. Under optimal conditions, the immunosensor had sensitive response to CEA in a wide linear range of 0.01pgmL(-1) to 10ngmL(-1) with a detection limit of 3.28 fg mL(-1). The proposed ECL immunosensor exhibited excellent stability, repeatability and selectivity, which opened another promising avenue for CEA determination in real serum samples.

  11. A Continuous Procedure Based on Column Chromatography to Purify Anthocyanins from Schisandra chinensis by a Macroporous Resin plus Gel Filtration Chromatography

    Directory of Open Access Journals (Sweden)

    Daran Yue

    2016-02-01

    Full Text Available In our previous study, as natural food colorants and antioxidants, the color and content stabilities of Schisandra chinensis (S. chinensis anthocyanins were investigated. In this work, the purification process parameters of S. chinensis anthocyanins using a macroporous resin and gel filtration chromatography were evaluated. The optimized parameters of static adsorption and desorption were as follows. The selected resin is HPD-300 (nonpolar copolymer styrene type resin, and the anthocyanins adsorption saturation capacity of HPD-300 resin was 0.475 mg/g dry resin. Adsorption time was 4 h, and 0.517 mg/mL of S. chinensis anthocyanins was adsorbed on the resin column with a flow rate of 39 mL/h (3 BV/h. After adsorption, the anthocyanins were completely desorpted with 2.5 BV of 90% (v/v ethanol solution, and the desorption flow rate was 13 mL/h (1 BV/h. After purification by dynamic adsorption and desorption, the anthocyanins content in the effluent increased from 47.6 mg/g to 128.4 mg/g, the purity of anthocyanins increased six-fold from 5.08% to 30.43%, and the anthocyanins recovery was 96.5%. The major constituent of S. chinensis anthocyanins was isolated with Bio-Gel P2 gel filtration chromatography, and it was detected by liquid chromatography electrospray ionisation tandem mass spectrometry (LC-ESI-MS as cyanidin-3-O-xylosylrutinoside. Moreover, the antioxidant activities of S. chinensis anthocyanins were investigated. After purification using the HPD-300 resin, the antioxidant activities of anthocyanins were increased 1.2-fold (FRAP and 1.7-fold (ABTS.

  12. Hierarchical micron-sized mesoporous/macroporous graphene with well-tuned surface oxygen chemistry for high capacity and cycling stability Li-O2 battery.

    Science.gov (United States)

    Zhou, Wei; Zhang, Hongzhang; Nie, Hongjiao; Ma, Yiwen; Zhang, Yining; Zhang, Huamin

    2015-02-11

    Nonaqueous Li-O2 battery is recognized as one of the most promising energy storage devices for electric vehicles due to its super-high energy density. At present, carbon or catalyst-supporting carbon materials are widely used for cathode materials of Li-O2 battery. However, the unique electrode reaction and complex side reactions lead to numerous hurdles that have to be overcome. The pore blocking caused by the solid products and the byproducts generated from the side reactions severely limit the capacity performance and cycling stability. Thus, there is a great need to develop carbon materials with optimized pore structure and tunable surface chemistry to meet the special requirement of Li-O2 battery. Here, we propose a strategy of vacuum-promoted thermal expansion to fabricate one micron-sized graphene matrix with a hierarchical meso-/macroporous structure, combining with a following deoxygenation treatment to adjust the surface chemistry by reducing the amount of oxygen and selectively removing partial unstable groups. The as-made graphene demonstrates dramatically tailored pore characteristics and a well-tuned surface chemical environment. When applied in Li-O2 battery as cathode, it exhibits an outstanding capacity up to 19 800 mA h g(-1) and is capable of enduring over 50 cycles with a curtaining capacity of 1000 mA h g(-1) at a current density of 1000 mA g(-1). This will provide a novel pathway for the design of cathodes for Li-O2 battery.

  13. On-line coupling of counter-current chromatography and macroporous resin chromatography for continuous isolation of arctiin from the fruit of Arctium lappa L.

    Science.gov (United States)

    Guo, Mengzhe; Liang, Junling; Wu, Shihua

    2010-08-13

    In this work, we have developed a novel hybrid two-dimensional counter-current chromatography and liquid chromatography (2D CCC x LC) system for the continuous purification of arctiin from crude extract of Arctium lappa. The first dimensional CCC column has been designed to fractionalize crude complex extract into pure arctiin effluent using a one-component organic/salt-containing system, and the second dimensional LC column has been packed with macroporous resin for on-line adsorption, desalination and desorption of arctiin which was effluent purified from the first CCC dimension. Thus, the crude arctiin mixture has been purified efficiently and conveniently by on-line CCC x LC in spite of the use of a salt-containing solvent system in CCC separation. As a result, high purity (more than 97%) of arctiin has been isolated by repeated injections both using the ethyl acetate-8% sodium chloride aqueous solution and butanol-1% sodium chloride aqueous solution. By contrast with the traditional CCC processes using multi-component organic/aqueous solvent systems, the present on-line CCC x LC process only used a one-component organic solvent and thus the solvent is easier to recover and regenerate. All of used solvents such as ethyl acetate, n-butanol and NaCl aqueous solution are low toxicity and environment-friendly. Moreover, the lower phase of salt-containing aqueous solution used as mobile phase, only contained minor organic solvent, which will save much organic solvent in continuous separation. In summary, our results indicated that the on-line hybrid 2D CCC x LC system using one-component organic/salt-containing aqueous solution is very promising and powerful tool for high-throughput purification of arctiin from fruits of A. lappa.

  14. Profiling bone morphogenetic proteins and transforming growth factor-βs by hTGF-β3 pre-treated coral-derived macroporous bioreactors: the power of one.

    Science.gov (United States)

    Ripamonti, Ugo; Dix-Peek, Thérèse; Parak, Ruqayya; Milner, Brenda; Duarte, Raquel

    2015-05-01

    To study the expression profile of bone morphogenetic proteins and transforming growth factor-βs (BMPs and TGFβs), coral-derived calcium carbonate-based macroporous bioreactors with limited conversion to hydroxyapatite (7% HA/CC) were pre-loaded with and without 250 μg hTGF-β3 and implanted in the rectus abdominis of 3 non-human primates Papio ursinus euthanized on day 60. To investigate the required dose of hNoggin, a BMPs antagonist that controls the induction of bone formation, 7% HA/CC were pre-loaded with 150 μg hNoggin, with 125 μg hTGF-β3/150 μg hNoggin, with or without 125 μg hTGF-β3 and implanted in the r. abdominis of 3 additional animals euthanized on day 90. Quantitative reverse-transcriptase polymerase chain reaction (qRT-PCR) evaluated the expression' profile of BMP-2, BMP-3, BMP-4, BMP-6, BMP-7 and TGF-β1, -β2, and -β3 in tissue generating bioreactors as well as in the adjacent r. abdominis muscle. On day 60, 250 μg hTGF-β3 induced bone formation at the periphery of the implanted bioreactors only. On day 90, 125 μg hTGF-β3/treated bioreactors showed the induction of bone formation throughout the macroporous spaces. Untreated bioreactors induced bone, 4.11% vs. 2.00% on days 60 and 90, respectively. In hTGF-β3/treated bioreactors, BMP-2 and BMP-3 were up-regulated at both time periods, both in the homogenized constructs and in the adjacent r. abdominis muscle whilst BMP-4 in the homogenized construct only. In untreated 7% HA/CC constructs, BMP-2 was up-regulated in the macroporous construct only. On day 60, 250 μg hTGF-β3/treated and untreated macroporous constructs showed up-regulation of TGF-β1 with a six fold increase vs. TGF-β1 expression in adjacent muscle of untreated constructs. TGF-β2 was down regulated in both untreated and 250 μg hTGF-β3/treated bioreactors. On day 60, 250 μg hTGF-β3/treated bioreactors showed TGF-β3 expression in untreated, treated and adjacent muscle tissues. On day 90, BMP-2 was up

  15. The Investigation on the Potential of Coconut Shell Powder Composite in Term of Carbon Composition, Surface Porosity and Dielectric Properties as a Microwave Absorbing Material

    Directory of Open Access Journals (Sweden)

    Yew Been Seok

    2016-01-01

    Full Text Available Agricultural wastes are renewable resources that are potentially useful as microwave absorbing materials. This paper presents the investigation on the carbon composition, surface porosity of the raw coconut shell powder particles and the dielectric properties of coconut shell powder with epoxy resin matrix composites. From CHNS elemental analysis, it was found that the carbon composition of coconut shell powder is 46.700%. Presences of macropores (≈ 2μm were detected in the SEM analysis of the coconut shell powder particles. Measurement on dielectric properties of the coconut shell powder composites was performed by using open-ended coaxial probe method over microwave frequency range of 1-8 GHz. The overall dielectric constant (εr’ and dielectric loss factor (εr” of the composite with ratio 50:50 were 3.56 and 0.26, ranging from 3.35-3.76 and 0.21-0.30 respectively; whereas for composite ratio 40:60, the overall dielectric constant (εr’ and dielectric loss factor (εr” were 2.97 and 0.21, ranging from 2.74-3.17 and 0.16-0.27 respectively. The electrical conductivity calculated based on measured εr” was 0.067 and 0.054 for composite ratio 50:50 and 40:60 respectively. The dielectric properties and electrical conductivity of the coconut shell powder composites were influenced by the greater presence of high dielectric material (coconut shell powder. This experimental investigation on the potential of the coconut shell powder with epoxy resin composites indicates that the ability of the composite to absorb and convert microwave signals is dependent on the carbonaceous materials of the composite. This result offers a great opportunity to diversify the use of coconut shell powder as microwave absorbing material.

  16. Study on purification of flavonoids from coriander with AB-8 macroporous resin%AB -8大孔树脂对芫荽黄酮的纯化工艺研究

    Institute of Scientific and Technical Information of China (English)

    王珊珊; 吴春

    2014-01-01

    利用AB-8大孔树脂纯化芫荽黄酮,通过静态和动态结合的方法,确定最佳工艺参数.结果表明,静态,吸附平衡时间为3 h,解析平衡时间为1.5 h;动态,上样液质量浓度为1.0 mg/mL,上样液pH值为6.0,上样流速为2 mL/min,洗脱剂质量浓度为70%乙醇溶液,洗脱流速为2 mL/min.在此条件下,AB-8大孔树脂可以较好的分离纯化芫荽中总黄酮.%AB-8 macroporous resin was used to separate and purify coriander flavonoids , static and dynamic adsorption and desorption behaviors of AB -8 macroporous resin were e-valuated for achieving the best purification of total flavonoids .The static:adsorption equilib-rium time was 4 h, desorption time was 1.5 h.The dynamic:the best adsorption was sample concentration of 1.0 mg/mL, pH of 6.0 and the flow rate of 2.0 mL/min.The desorption flow rate of 2.0 mL/min and 70% ethanol elution were the best .With definite technical process , the AB-8 macroporous resin could be used to purify the flavonoids of coriander .

  17. One-pot preparation of silica-supported hybrid immobilized metal affinity adsorbent with macroporous surface based on surface imprinting coating technique combined with polysaccharide incorporated sol--gel process.

    Science.gov (United States)

    Li, Feng; Li, Xue-Mei; Zhang, Shu-Sheng

    2006-10-06

    A simple and reliable one-pot approach using surface imprinting coating technique combined with polysaccharide incorporated sol-gel process was established to synthesize a new organic-inorganic hybrid matrix possessing macroporous surface and functional ligand. Using mesoporous silica gel being a support, immobilized metal affinity adsorbent with a macroporous shell/mesoporous core structure was obtained after metal ion loading. In the prepared matrix, covalently bonded coating and morphology manipulation on silica gel was achieved by using one-pot sol-gel process starting from an inorganic precursor, -glycidoxypropyltrimethoxysiloxane (GPTMS), and a functional biopolymer, chitosan (CS) at the atmosphere of imprinting polyethylene glycol (PEG). Self-hydrolysis of GPTMS, self-condensation, and co-condensation of silanol groups (Si-OH) from siloxane and silica gel surface, and in situ covalent cross-linking of CS created an orderly coating on silica gel surface. PEG extraction using hot ammonium hydroxide solution gave a chemically and mechanically stabilized pore structure and deactivated residual epoxy groups. The prepared matrix was characterized by using X-ray energy dispersion spectroscopy (EDX), scanning electron microscopy (SEM) and mercury intrusion porosimetry. The matrix possessed a high capacity for copper ion loading. Protein adsorption performance of the new immobilized metal affinity adsorbent was evaluated by batch adsorption and column chromatographic experiment using bovine serum albumin (BSA) as a simple model protein. Under the optimized coating conditions, the obtained macroporous surface resulted in a fast kinetics and high capability for protein adsorption, while the matrix non-charged with metal ions offered a low non-specific adsorption.

  18. Effects of Macropore on Soil Specific Water Capacity and Unsaturated Hydraulic Conductivity%大孔隙对土壤比水容重及非饱和导水率影响的实验研究

    Institute of Scientific and Technical Information of China (English)

    尚熳廷; 张建云; 刘九夫; 王小军

    2012-01-01

    以南京市栖霞区东阳镇的粉砂壤土为例,用土壤水分特征曲线(van Genuchten模型)拟合包含大孔隙原状土、不包含大孔隙扰动土的实测数据,得到了模型参数,进而得到比水容重和非饱和导水率与土壤含水量之间关系的表达式,在此基础上对比分析了原状土与扰动土水分运动参数之间的异同,并着重分析了土壤大孔隙对其影响。结果表明,受土壤大孔隙的影响,在同一含水量的情况下,扰动土的比水容重比原状土大1~2个数量级,并且随着吸力的增大,二者的差值逐渐减小;扰动土的非饱和导水率小于原状土,最大可相差2~3个数量级。%Take the silt loam soil of Dongyang town of Qixia district of Nanjing city for example,the van Genuchten model parameters of soil water characteristic curve were obtained by fitting measured date of undisturbed soil which include macropore and disturbed soil which not include macropore.Then,expressions of soil specific water capacity and unsaturated hydraulic conductivity were obtained.On this basis,comparative analysis is made with the soil water movement parameters' similarities and differences of undisturbed soil and disturbed soil,and emphatically analysised the influence of macropore to them.The results showed that,due to the effect of soil macropore,with the same soil water content,the specific water capacity of disturbed soil is 1 to 2 order of magnitude larger than undisturbed soil,and the difference of them is decreasing with the soil water suction increasing,the unsaturated soil hydraulic conductivity of disturbed is less than undisturbed soil,the difference maybe 2 to 3 order of magnitude.

  19. PREPARATION AND CHARACTERIZATION OF MACROPOROUS CALCIUM PHOSPHATE CEMENT SCAFFOLD WITH ORIENTED PORE STRUCTURE%具有定向孔隙结构的大孔磷酸钙骨水泥支架的制备与表征

    Institute of Scientific and Technical Information of China (English)

    漆小鹏; 叶建东; 王秀鹏; 王迎军

    2007-01-01

    A macroporous calcium phosphate cement scaffold with oriented pore structure is prepared by freeze casting. The pore structure and phases formed were evaluated by scanning electron microscope(SEM)and X-ray diffraction (XRD). The photographs of SEM show that the porous calcium phosphate cements have interconnected macropores aligned along the ice growth direction and the sizes of the open interconnected macropores can reach 150μm and 200 μm in their radial dimension and 500-1 000 μmn in the axial one. The pore size could be adjusted by the freezing parameters to match the requirements for bone tissue. The XRD patterns of the specimens show that poorly crystallized hydroxyapatite (HA) was the main phase present in the porous calcium phosphate cement.The porosity of the samples could be regulated from about 70% to 90% by the adjustment of the initial liquid to powder mass ratio.The macroporous calcium phosphate cement prepared in this work might be a potential scaffold for bone tissue engineering.%利用冷冻塑形法制备了具有定向孔隙结构的大孔磷酸钙骨水泥支架.利用扫描电镜(scanning electron microscope,SEM)和x射线衍射(X-ray diffraction,XRD)对材料的孔隙结构和物相进行了研究.SEM照片显示:多孔磷酸钙骨水泥具有与冰晶生长方向一致的相互连通的大孔.开口大孔的尺寸在径向能达到150~200 μm,在轴向能达到500~1 000 μm.孔隙的大小可以通过改变冷冻参数进行调节.XRD谱显示:多孔磷酸钙骨水泥中的主要相为弱结晶的羟基磷灰石.材料的孔隙率可以通过调整液固比在70%到90%之间进行调节.实验制备的大孔磷酸钙骨水泥支架是很有希望的骨组织工程支架材料.

  20. 鱼腥草总生物碱的大孔吸附树脂纯化工艺%Purification Process of Total Alkaloids from Houttuynia cordata by Macroporous Resin

    Institute of Scientific and Technical Information of China (English)

    孟江; 梁慧超; 陈磊; 卢国勇; 巫丹凤

    2012-01-01

    Objective: To optimize separation and purification technology of total alkaloids from Houttuynia cordata by macroporous resin. Method: With the content of berberine hydrochloride, pepper lactam and aristololactam B as indexes, separation and purification capacity of total alkaloids from H. Cordata was compared with different types of macroporous resin and different technology conditions. Result; HPD-100 macroporous resin had the best separation and purification capacity for total alkaloids in following technology conditions; sample concentration was 20 g ? L-1 with Ph 3, flow rate was 0. 5 Ml ? Min -1, eluting reagent was ethanol solution of ammonia ( ammonia concentration 0. 5 mol ? L-1, the volume fraction of ethanol 80% ) with the amount of 4 BV, eluting velocity was 3.0 Ml ? Min-1. Conclution: HPD-100 macroporous resin could be applied to purify alkaloids from H. Cordata.%目的:优选鱼腥草总生物碱大孔吸附树脂的分离纯化工艺.方法:以盐酸小檗碱、胡椒内酰胺及马兜铃内酰胺B含量为指标,比较不同型号树脂和不同工艺条件对鱼腥草总生物碱的分离纯化能力.结果:HPD-100型大孔树脂对鱼腥草总生物碱有良好的吸附分离性能,最佳工艺条件为药液质量浓度20 g?L-1,pH 3,吸附流速0.5 mL? min -1,洗脱溶剂为氨水乙醇溶液(氨水浓度0.5 mol?L-1,乙醇体积分数80%),洗脱剂用量4 BV,洗脱速度3.0mL?min -1.结论:HPD-100型大孔树脂可用于鱼腥草总生物碱的提取纯化.

  1. 不同大孔树脂富集山茱萸中环烯醚萜苷的效果比较%Comparison of Enrichment Effect of Iridoid Glycosides from Cornus officinalis by Different Macroporous Resins

    Institute of Scientific and Technical Information of China (English)

    蔡黎明; 周盈; 蔡宝昌; 刘芳; 皮文霞

    2013-01-01

    目的:考察不同类型大孔树脂对山茱萸中环烯醚萜苷类成分的分离效果.方法:采用HPLC测定山茱萸中马钱苷及莫诺苷的含量,考察不同大孔吸附树脂分离山茱萸中环烯醚萜苷类成分的有效性.结果:马钱苷、莫诺苷的回归方程依次为y=17.245X+ 13.362(r=0.999 9),Y=15.468X-41.275(r=1.000 0);线性范围分别为21.75~435,35.8 ~716 μg;加样回收率分别为98.27%,96.29%.HPD-400型大孔树脂的分离效果最好.结论:选取马钱苷和莫诺苷含量为指标筛选富集环烯醚萜苷的大孔树脂类型是可行的,研究结果为分离山茱萸中有效部位的后续研究提供实验依据.%Objective:To investigate separation effect of iridoid glycosides from Cornus officinalis by different types of macroporous resin.Method:The content of loganin and morroniside from C.officinalis was determined by HPLC,effectiveness of different macroporous adsorption resin on separating iridoid glycosides from C.officinalis was investigated.Result:HPD-400 type of macroporous resin had the best separation effect.Regression equation of loganin and morroniside were Y =17.245X + 13.362 (r =0.999 9),Y =15.468X-41.275 (r =1.000 0) ; The linear range of them were 21.75-435,35.8-716 μg; Recoveries were 98.27%,96.29%,respectively.Conclusion:It was feasible that selected the content of loganin and morroniside as index to screen macroporous resin for enrichment iridoid glycosides from C.officinalis,this study could provide experimental basis for the follow-up study of separation of effective parts from C.officinalis.

  2. Composite Materials

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    This book deals with the mechanical and physical behavior of composites as influenced by composite geometry. "Composite Materials" provides a comprehensive introduction for researchers and students to modern composite materials research with a special emphasis on the significance of phase geometry....... The book enables the reader to a better understanding of the behavior of natural composites, improvement of such materials, and design of new materials with prescribed properties. A number of examples are presented: Special composite properties considered are stiffness, shrinkage, hygro-thermal behavior...... materials. Numerical procedures are outlined which facilitate the practical analysis of any feature considered in this book. Examples are presented which illustrate the analysis of well-known materials such as concrete, hardening cement paste, ceramics, tile, wood, impregnated and reinforced materials...

  3. Bioactive nanoparticle-gelatin composite scaffold with mechanical performance comparable to cancellous bones.

    Science.gov (United States)

    Wang, Chen; Shen, Hong; Tian, Ye; Xie, Yue; Li, Ailing; Ji, Lijun; Niu, Zhongwei; Wu, Decheng; Qiu, Dong

    2014-08-13

    Mechanical properties are among the most concerned issues for artificial bone grafting materials. The scaffolds used for bone grafts are either too brittle (glass) or too weak (polymer), and therefore composite scaffolds are naturally expected as the solution. However, despite the intensive studies on composite bone grafting materials, there still lacks a material that could be matched to the natural cancellous bones. In this study, nanosized bioactive particles (BP) with controllable size and good colloidal stability were used to composite with gelatin, forming macroporous scaffolds. It was found that the mechanical properties of obtained composite scaffolds, in terms of elastic modulus, compressive strength, and strain at failure, could match to that of natural cancellous bones. This is ascribed to the good distribution of particle in matrix and strong interaction between particle and gelatin. Furthermore, the incorporation of BPs endues the composite scaffolds with bioactivity, forming HA upon reacting with simulated body fluid (SBF) within days, thus stimulating preosteoblasts attachment, growth, and proliferation in these scaffolds. Together with their good mechanical properties, these composite scaffolds are promising artificial bone grating materials.

  4. Behaviour of a new composite mesh for the repair of full-thickness abdominal wall defects in a rabbit model.

    Directory of Open Access Journals (Sweden)

    Gemma Pascual

    Full Text Available INTRODUCTION: Composite biomaterials designed for the repair of abdominal wall defects are composed of a mesh component and a laminar barrier in contact with the visceral peritoneum. This study assesses the behaviour of a new composite mesh by comparing it with two latest-generation composites currently used in clinical practice. METHODS: Defects (7x5cm created in the anterior abdominal wall of New Zealand White rabbits were repaired using a polypropylene mesh and the composites: Physiomesh(TM; Ventralight(TM and a new composite mesh with a three-dimensional macroporous polyester structure and an oxidized collagen/chitosan barrier. Animals were sacrificed on days 14 and 90 postimplant. Specimens were processed to determine host tissue incorporation, gene/protein expression of neo-collagens (RT-PCR/immunofluorescence, macrophage response (RAM-11-immunolabelling and biomechanical resistance. On postoperative days 7/14, each animal was examined laparoscopically to quantify adhesions between the visceral peritoneum and implant. RESULTS: The new composite mesh showed the lowest incidence of seroma in the short term. At each time point, the mesh surface covered with adhesions was greater in controls than composites. By day 14, the implants were fully infiltrated by a loose connective tissue that became denser over time. At 90 days, the peritoneal mesh surface was lined with a stable mesothelium. The new composite mesh induced more rapid tissue maturation than Physiomesh(TM, giving rise to a neoformed tissue containing more type I collagen. In Ventralight(TM the macrophage reaction was intense and significantly greater than the other composites at both follow-up times. Tensile strengths were similar for each biomaterial. CONCLUSIONS: All composites showed optimal peritoneal behaviour, inducing good peritoneal regeneration and scarce postoperative adhesion formation. A greater foreign body reaction was observed for Ventralight(TM. All composites induced

  5. Food Composition

    NARCIS (Netherlands)

    West, C.E.; Schonfeldt, H.C.

    2002-01-01

    Reliable good-quality food composition data of foods for human consumption are critical resources for a variety of applications. The determination of the consumption of nutrients can be achieved either by analyzing the foods consumed directly or by using food composition tables

  6. Composite Territories

    DEFF Research Database (Denmark)

    Nicholas, Paul; Tamke, Martin

    2012-01-01

    and assembly of the fibre reinforced composite structure Composite Territories, in which the property of bending is activated and varied so as to match solely through material means a desired form. This case study demonstrates how one might extend the geometric model so that it is able to engage and reconcile...

  7. Food Composition

    NARCIS (Netherlands)

    West, C.E.; Schonfeldt, H.C.

    2002-01-01

    Reliable good-quality food composition data of foods for human consumption are critical resources for a variety of applications. The determination of the consumption of nutrients can be achieved either by analyzing the foods consumed directly or by using food composition tables

  8. Recycled Poly(vinyl alcohol) Sponge for Carbon Encapsulation of Size-Tunable Tin Dioxide Nanocrystalline Composites.

    Science.gov (United States)

    Ma, Yue; Tai, Cheuk-Wai; Gustafsson, Torbjörn; Edström, Kristina

    2015-06-22

    The recycling of industrial materials could reduce their environmental impact and waste haulage fees and result in sustainable manufacturing. In this work, commercial poly(vinyl alcohol) (PVA) sponges are recycled into a macroporous carbon matrix to encapsulate size-tunable SnO2 nanocrystals as anode materials for lithium-ion batteries (LIBs) through a scalable, flash-combustion method. The hydroxyl groups present copiously in the recycled PVA sponges guarantee a uniform chemical coupling with a tin(IV) citrate complex through intermolecular hydrogen bonds. Then, a scalable, ultrafast combustion process (30 s) carbonizes the PVA sponge into a 3D carbon matrix. This PVA-sponge-derived carbon could not only buffer the volume fluctuations upon the Li-Sn alloying and dealloying processes but also afford a mixed conductive network, that is, a continuous carbon framework for electrical transport and macropores for facile electrolyte percolation. The best-performing electrode based on this composite delivers a rate performance up to 9.72 C (4 A g(-1) ) and long-term cyclability (500 cycles) for Li(+) ion storage. Moreover, cyclic voltammograms demonstrate the coexistence of alloying and dealloying processes and non-diffusion-controlled pseudocapacitive behavior, which collectively contribute to the high-rate Li(+) ion storage. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Preparative isolation of cordycepin, N(6)-(2-hydroxyethyl)-adenosine and adenosine from Cordyceps militaris by macroporous resin and purification by recycling high-speed counter-current chromatography.

    Science.gov (United States)

    Zhang, Zhong; Tudi, Tuernisan; Liu, Yanfang; Zhou, Shuai; Feng, Na; Yang, Yan; Tang, Chuanhong; Tang, Qingjiu; Zhang, Jingsong

    2016-10-15

    In this study, cordycepin, N(6)-(2-hydroxyethyl)-adenosine (HEA) and adenosine from the fruiting bodies of Cordyceps militaris were separated by using macroporous resin NKA-II adsorption. The parameters of static adsorption were tested and the optimized conditions were as follow: the total adsorption time was 12h, 50% ethanol was used for desorption and the desorption time was 9h. The crude sample that was prepared by macroporous resin NKA-II contained 3.4% cordycepin, 3.7% HEA and 4.9% adenosine. Then the crude sample was further purified by recycling high-speed counter-current chromatography (HSCCC) with ethyl acetate, n-butanol, 1.5% aqueous ammonium hydroxide (1:4:5, v/v/v) as the optimized two-phase solvent system. Three nucleosides including 15.6mg of cordycepin, 16.9mg of HEA and 23.2mg of adenosine were obtained from 500mg of crude sample in one-step separation. The purities of three compounds were 98.5, 98.3 and 98.0%, respectively, as determined by high performance liquid chromatography. Copyright © 2016. Published by Elsevier B.V.

  10. Smart Macroporous IPN Hydrogels Responsive to pH, Temperature, and Ionic Strength: Synthesis, Characterization, and Evaluation of Controlled Release of Drugs.

    Science.gov (United States)

    Dragan, Ecaterina Stela; Cocarta, Ana Irina

    2016-05-18

    Fast responsive macroporous interpenetrating polymer network (IPN) hydrogels were fabricated in this work by a sequential strategy, as follows: the first network, consisting of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEM) cross-linked with N,N'-methylenebisacrylamide (BAAm), was prepared at -18 °C, the second network consisting of poly(acrylamide) (PAAm) cross-linked with BAAm, being also generated by cryogelation technique. Both single network cryogels (SNC) and IPN cryogels were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and water uptake. The presence of weak polycation PDMAEM endows the SNCs and the IPNs cryogels with sensitivity at numerous external stimuli such as pH, temperature, ionic strength, electric field, among which the first three were investigated in this work. It was found that the initial concentration of monomers in both networks was the key factor in tailoring the properties of IPN cryogels such as swelling kinetics, equilibrium water content (EWC), phase transition temperature and the response at ionic strength. The pore size increased after the formation of the second network, the swelling kinetics in pure water being comparable with that of the SNC, phase transition temperature being situated in the range 35-36 °C for IPN cryogels. The water uptake at equilibrium (WUeq) abruptly increased at pH network, the monomer concentration in the second network being about 10 wt %. The pH response was very much diminished when the monomer concentration was high in both networks (15 wt % in the first network, and 21 wt % in the second network). The increase of the ionic strength from 0 up to 0.3 M NaCl led to the decrease of the WUeq, for all cryogels, the level of dehydration being higher and faster for the SNC than for the corresponding IPN cryogel. The release of diclofenac sodium (DS), as a model acidic drug, triggered by pH, temperature, and ionic strength from the IPN cryogels was evaluated. A

  11. 大孔树脂分离富集匙羹藤总皂苷研究%Enrichment of saponins of Gymnema sylvestre by macroporous resins

    Institute of Scientific and Technical Information of China (English)

    韦泽昭; 孙建华; 寥丹葵; 陈晓光; 韦藤幼; 邹昀; 童张法

    2011-01-01

    采用大孔树脂对匙羹藤总皂苷进行分离富集.考察了5种树脂对匙羹藤总皂苷的静态吸附效果并筛选出D101树脂用于分离富集匙羹藤总皂苷,通过动态吸附性能考察,确定了D101树脂固定床分离富集匙羹藤总皂苷的工艺条件,在ρ(总皂苷)=5 mg/mL,pH=6,料液以1.0 mL/min的流速通过D101树脂固定床进行吸附,分别用去离子水和ψ(乙醇)=10%溶液洗脱杂质后,再用ψ(乙醇)=75%溶液洗脱匙羹藤总皂苷.经过分离富集后,ω(总皂苷)由粗浸膏的25.33%提高到51.07%,总皂苷的回收率为83.26%.%Total saponins of Gymnema sylvestre were separated and enriched with macroporous resins. The adsorption capacity and adsorption ratio of five kinds of adsorption resins for total saponins in ex-traction of Gymnema sylvestre were investigated. The results of saturated static adsorption of different types of resins showed that D101 was suitable for the separation of total saponins. Further,the concen-tration and Ph of total saponins of Gymnema sylvestre in solution, flow rate, the concentration of the elution reagent were optimized. The results showed that the purity of total saponins of Gymnema syl-vestre was raised to 51. 07% from 25. 33% and the recovery was 83. 26%. Total saponins of Gymnema sylvestre was enriched effectively.

  12. Computational composites

    DEFF Research Database (Denmark)

    Vallgårda, Anna K. A.; Redström, Johan

    2007-01-01

    Computational composite is introduced as a new type of composite material. Arguing that this is not just a metaphorical maneuver, we provide an analysis of computational technology as material in design, which shows how computers share important characteristics with other materials used in design...... and architecture. We argue that the notion of computational composites provides a precise understanding of the computer as material, and of how computations need to be combined with other materials to come to expression as material. Besides working as an analysis of computers from a designer’s point of view......, the notion of computational composites may also provide a link for computer science and human-computer interaction to an increasingly rapid development and use of new materials in design and architecture....

  13. Hybrid composites

    CSIR Research Space (South Africa)

    Jacob John, Maya

    2009-04-01

    Full Text Available effect was observed for the elongation at break of the hybrid composites. The impact strength of the hybrid composites increased with the addition of glass fibres. The tensile and impact properties of thermoplastic natural rubber reinforced short... panels made from conventional structural materials. Figure 3 illustrates the performance of cellular biocomposite panels against conventional systems used for building and residential construction, namely a pre- cast pre-stressed hollow core concrete...

  14. Co有序大孔阵列的制备及孔间距对磁性的影响%Preparation of Co Ordered Macroporous Arrays and the Effect of Microgrid Spacing on Magnetic Properties

    Institute of Scientific and Technical Information of China (English)

    祁洪飞; 刘大博; 郝维昌; 王天民

    2012-01-01

    Co ordered macroporous arrays with different microgrid spacing and the same thickness were prepared via sputtering Co into the gaps of PS colloidal crystal templates by adjusting sputtering power and sputtering time. The structure and magnetic properties of the Co ordered macroporous arrays were characterized by SEM, AFM, XRD and VSM, respectively. Results show that the coercivity and remanence ratio of the Co ordered macroporous arrays are up to 175.02×10-4 T and 0.76, which are 2.2 and 2.5 times of those of Co films, respectively. Moreover, with the increase of the microgrid spacing, the coercivity and the remanence ratio decrease gradually. The results of theoretical analysis indicate that the excellent magnetic characteristics come from the shape anisotropies induced by the structure itself, and the competition between the shape anisotropies and the magnetocrystalline anisotropy results in the change of the magnetic properties.%以聚苯乙烯胶体晶体为模板,通过调制溅射功率和溅射时间制备了相同厚度、不同孔间距的Co有序大孔阵列.利用扫描电子显微镜(SEM)、原子力显微镜(AFM)、X射线衍射(XRD)和振动样品磁强计(VSM)考察了样品的结构和磁学特性.发现Co有序大孔阵列的矫顽力和剩磁比最大达到175.02×10-4 T和0.76,分别为Co薄膜的2.2倍和2.5倍,并且随孔间距的增大逐渐降低.结合理论分析结果表明,Co有序大孔阵列本身的形状各向异性是其取得优良磁学性能的原因,孔洞形状各向异性和薄膜本身磁晶各向异性的竞争机制是造成其磁性发生变化的物理本质.

  15. Kinetics and Thermodynamics of Adsorption Glycyrrhizic Acid Triammonium Salt on NKA Macroporous Resin%NKA大孔吸附树脂对甘酸三铵盐吸附的动力学和热力学研究

    Institute of Scientific and Technical Information of China (English)

    何秀娟; 洪成林; 齐誉; 乔秀文; 但建明

    2013-01-01

    By static adsorption experiments,this paper studied the kinetics and adsorption thermodynamic characteristics of NKA macroporous resin in the process of adsorbing glycyrrhizic acid triammonium salt(GATS),and provided theoretical support for GATS macroporous adsorption resin separation and purification.Ultraviolet and visible spectrophotometry was used to detect the adsorptive kinetics curve and the adsorption equilibrium curve at different tenperatures.The adsorption kinetics behavior was well described by the pseudo-second-order kinetice equation.The thermodynamics behavior was correlated with Langmuir equation.In GATS adsorption process of NKA macroporous resin,enthalpy change ΔH and entropy change ΔS were positive,free energy change ΔG were negative,and adsorption activation energy was 36.01 kJ/mol when temperatures were in the range of 293~313 K.It is indicated that the adsorption was a spontaneous and endothermic process,the process of adsorption was mainly physical adsorption.%本文通过静态吸附实验,研究了NKA大孔吸附树脂吸附甘草酸三铵盐过程的吸附动力学和吸附热力学特征,以期为甘草酸大孔吸附树脂分离提纯提供理论支持.实验采用紫外可见分光光度法测定了吸附动力学曲线和不同温度时的吸附等温线,用拟二级动力学方程很好地描述了吸附动力学过程,使用Langmuir方程较好地拟合了等温吸附热力学过程.实验结果显示:NKA大孔吸附树脂对甘草酸三铵盐吸附焓变ΔH吸附和熵变ΔS吸附为正值,自由能变△G为负值,吸附活化能为Ea =36.01 kJ/mol;该吸附过程是自发的吸热过程,属于物理吸附范畴.

  16. Effect of Biomass Waste Filler on the Dielectric Properties of Polymer Composites

    Directory of Open Access Journals (Sweden)

    Yew Been Seok

    2016-07-01

    Full Text Available The effect of biomass waste fillers, namely coconut shell (CS and sugarcane bagasse (SCB on the dielectric properties of polymer composite was investigated. The aim of this study is to investigate the potential of CS and SCB to be used as conductive filler (natural source of carbon in the polymer composite. The purpose of the conductive filler is to increase the dielectric properties of the polymer composite. The carbon composition the CS and SCB was determine through carbon, hydrogen, nitrogen and sulphur (CHNS elemental analysis whereas the structural morphology of CS and SCB particles was examined by using scanning electron microscope. Room temperature open-ended coaxial line method was used to determine the dielectric constant and dielectric loss factor over broad band frequency range of 200 MHz-20 GHz. Based on this study, the results found that CS and SCB contain 48% and 44% of carbon, which is potentially useful to be used as conductive elements in the polymer composite. From SEM morphology, presence of irregular shape particles (size ≈ 200 μm and macroporous structure (size ≈ 2.5 μm were detected on CS and SCB. For dielectric properties measurement, it was measured that the average dielectric constant (ε' is 3.062 and 3.007 whereas the average dielectric loss factor (ε" is 0.282 and 0.273 respectively for CS/polymer and SCB/polymer composites. The presence of the biomass waste fillers have improved the dielectric properties of the polymer based composite (ε' = 2.920, ε" = 0.231. However, the increased in the dielectric properties is not highly significant, i.e. up to 4.86 % increase in ε' and 20% increase in ε". The biomass waste filler reinforced polymer composites show typical dielectric relaxation characteristic at frequency of 10 GHz - 20 GHz and could be used as conducting polymer composite for suppressing EMI at high frequency range.

  17. Composite material

    Science.gov (United States)

    Hutchens, Stacy A.; Woodward, Jonathan; Evans, Barbara R.; O'Neill, Hugh M.

    2012-02-07

    A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

  18. Resin composites

    DEFF Research Database (Denmark)

    Benetti, Ana Raquel; Peutzfeldt, Anne; Lussi, Adrian;

    2014-01-01

    OBJECTIVE: To investigate how the modulus of elasticity of resin composites influences marginal quality in restorations submitted to thermocyclic and mechanical loading. METHODS: Charisma, Filtek Supreme XTE and Grandio were selected as they were found to possess different moduli of elasticity...... of resin composite (p=0.81) on the quality of dentine margins was observed, before or after loading. Deterioration of all margins was evident after loading (p....008). CONCLUSIONS: The resin composite with the highest modulus of elasticity resulted in the highest number of gap-free enamel margins but with an increased incidence of paramarginal enamel fractures. CLINICAL SIGNIFICANCE: The results from this study suggest that the marginal quality of restorations can...

  19. Facile synthesis and unique physicochemical properties of three-dimensionally ordered macroporous magnesium oxide, gamma-alumina, and ceria-zirconia solid solutions with crystalline mesoporous walls.

    Science.gov (United States)

    Li, Huining; Zhang, Lei; Dai, Hongxing; He, Hong

    2009-05-18

    Three-dimensionally (3D) ordered macroporous (3DOM) MgO, gamma-Al(2)O(3), Ce(0.6)Zr(0.4)O(2), and Ce(0.7)Zr(0.3)O(2) with polycrystalline mesoporous walls have been successfully fabricated with the triblock copolymer EO(106)PO(70)EO(106) (Pluronic F127) and regularly packed monodispersive polymethyl methacrylate (PMMA) microspheres as the template and magnesium, aluminum, cerium and zirconium nitrate(s), or aluminum isopropoxide as the metal source. The as-synthesized metal oxides were characterized by means of techniques such as X-ray diffraction (XRD), thermogravimetric analysis/differential scanning calorimetry (TGA/DSC), Fourier transform infrared (FT-IR), high-resolution scanning electron microscopy (HRSEM), high-resolution transmission electron microscopy/selected area electron diffraction (HRTEM/SAED), BET, carbon dioxide temperature-programmed desorption (CO(2)-TPD), and hydrogen temperature-programmed reduction (H(2)-TPR). It is shown that the as-fabricated MgO, gamma-Al(2)O(3), Ce(0.6)Zr(0.4)O(2), and Ce(0.7)Zr(0.3)O(2) samples possessed single-phase polycrystalline structures and displayed a 3DOM architecture; the MgO, Ce(0.6)Zr(0.4)O(2), and Ce(0.7)Zr(0.3)O(2) samples exhibited worm-hole-like mesoporous walls, whereas the gamma-Al(2)O(3) samples exhibited 3D ordered mesoporous walls. The solvent (ethanol or water) nature and concentration, metal precursor, surfactant, and drying condition have an important impact on the pore structure and surface area of the final product. The introduction of surfactant F127 to the synthesis system could significantly enhance the surface areas of the 3DOM metal oxides. With PMMA and F127 in a 40% ethanol solution, one can generate well-arrayed 3DOM MgO with a surface area of 243 m(2)/g and 3DOM Ce(0.6)Zr(0.4)O(2) with a surface area of 100 m(2)/g; with PMMA and F127 in an ethanol-HNO(3) solution, one can obtain 3DOM gamma-Al(2)O(3)with a surface area of 145 m(2)/g. The 3DOM MgO and 3DOM gamma-Al(2)O(3) samples showed

  20. Synthesis of selenium/EDTA-derived porous carbon composite as a Li-Se battery cathode

    Science.gov (United States)

    Zhao, Chenhao; Fang, Shuzhen; Hu, Zhibiao; Qiu, Sheng'en; Liu, Kaiyu

    2016-07-01

    The carbon substrate with unique 3D macroporous structure has been prepared through the immediate carbonization of ethylenediaminetetraacetic acid (EDTA) and KOH mixture. The porous carbon composed of micro- and small mesoporous (2-5 nm) structure has a BET specific surface area of 1824.8 m2 g-1. The amorphous and nanosized Se is uniformly encapsulated into the porous structure of porous carbon using melting diffusion route, and the weight content of Se in target Se/C composite can be as high as 50 %. As an Li-Se battery cathode, the Se/C composite delivers a reversible (2nd) discharge capacity of 597.4 mAh g-1 at 0.24C and retains a discharge capacity of 538.4 mAh g-1 at 0.24C after 100 cycles. Furthermore, the composite also has a stable capacity of 291.0 mAh g-1 at a high current of 4.8C. The high specific area and good porous size of EDTA-derived carbon substrate may a be responsibility for the excellent electrochemical performances of Se/C composite.

  1. 2种大孔树脂用于麒麟菜生产卡拉胶的脱色%Decolorization of carrageenane from eucheuma by two kinds of macroporous resin

    Institute of Scientific and Technical Information of China (English)

    闫静芳; 焦琳舒; 张生生; 陈阳阳; 王昱沣

    2015-01-01

    卡拉胶作为一种具有商业价值的亲水凝胶,在食品、药品等领域具有广泛的应用,但在提取过程中色素的溶出会影响产品的品质.文中采用大孔树脂D301和D315对麒麟菜卡拉胶进行脱色研究,以脱色率和多糖保留率为指标,在单因素的基础上,采用正交实验对2种大孔树脂的脱色工艺进行优化.结果表明:大孔树脂D301的脱色效果优于D315,最佳脱色条件为温度50℃、pH 9.0、树脂用量为0.12 g/mL、脱色时间80 min,在此条件下的脱色率达48.44%,多糖保留率则为84.30%.所采用方法操作简单,成本低,为工业生产中卡拉胶脱色提供了理论基础.%As a kind of hydrophilic gel which had commercial value,carrageenan was applied widely in the industry of medicine and food.But the existence of color material would affect the quality of it.In this research,macroporous resin D301 and D315 were used to decolor carrageenan extracted from Eucheuma.Taking decoloration rate and retention rate of polysaccharide as evaluation standards,and comparing with the decolor result of active carbon,orthofonal method was applied to optimize the decolor procession of the two decolorants on the basis of single factor experiments for the first time.The results showed that the decoloration rate of active carbon was relatively low with numerous residue of active carbon in the carrageenan solvent.The performance of macroporous resin D315 was not efficient for having a low rentation rate of polysaccharide.The macroporous resin D301 had the most efficient performance in the decoloration procession.The optimal conditions were that the temperature was 50 ℃,the pH was 7.0,the amount of macroporous resin was 0.12 g/mL,and the used time was 80 min.On the optimal conditions,the decoloration rate was 48.44%,and the polysaccharide rentation rate was 84.30%.The method we applied is simple and cheap,as well as provides base for the industrial decolor procession of carrageenan.

  2. 大孔 FCC催化剂的制备及裂化性能研究%Preparation of macroporous catalysts and their performance in catalytic cracking of heavy oil

    Institute of Scientific and Technical Information of China (English)

    刘子媛; 陈胜利; 董鹏

    2012-01-01

    Two types of macroporous catalysts were prepared by using polystyrene particles (PS) and de-oiled vacuum residue (VR) as templates; their pore structure and catalytic performance in the catalytic cracking of heavy oil (FCC) were investigated. Compared with the traditional catalyst without using template,two catalysts using the PS and VR templates exhibit an increase of BET surface area by 38. 0% and 46. 2% ,an increase of pore volume by 20.6% and 35.8% ,and an increase of average pore size by 54. 5 % and 27.3 % ,respectively. Meanwhile,the conversions of heavy oil over two catalysts using the PS and VR templates are also increased by 9.8% and 12. 2% ,and the total liquid yields are increased by 10.2% and 7.3% ,respectively,compared with that over the traditional catalyst. After enduring coke deposition in FCC,the activity of the macroporous catalysts was decreased as was expected,but still higher than that of the traditional catalyst at similar situation. The macroporous catalysts own a reasonable pore distribution due to the pore expansion with templates,which promotes the mass transfer in the macropores of the catalysts and provide them with higher tolerance towards coke deposition; these may contribute to their excellent performance in the catalytic cracking of heavy oil.%利用聚苯乙烯(PS)颗粒和脱油残渣(VR)乳液为模板剂制备了大孔重油催化裂化催化剂,与未加模板的参比催化剂相比,比表面积分别增加了38.0%和46.2%,孔体积分别增加了20.6%和35.8%,平均孔径分别增加了54.5%和27.3%.微反评价结果表明,大孔催化剂活性较高,对重油的转化率分别提高了9.8%和12.2%,总液收分别提高了10.2%和7.3%.与参比催化剂相比,积炭后PS颗粒和VR乳液模板大孔催化剂的活性有一定程度的降低,但是当积炭量相同时,大孔催化剂的重油转化率和总液体产物收率都比参比催化剂要高,且两类大孔催化剂的数据比较接近.催化

  3. β-cyclodextrin functionalized meso-/macroporous magnetic titanium dioxide adsorbent as extraction material combined with gas chromatography-mass spectrometry for the detection of chlorobenzenes in soil samples.

    Science.gov (United States)

    Zhang, Jiabin; Gan, Ning; Chen, Si; Pan, Muyun; Wu, Dazhen; Cao, Yuting

    2015-07-03

    A high-performance and selective adsorbent was developed for simultaneous extraction of 6 chlorobenzenes residues in soil samples by using magnetic solid phase extraction (MSPE) combined with automated SPE followed by gas chromatography-mass spectrometry (GC-MS). The adsorbent was synthesized by grafting carboxymethyl-β-cyclodextrin (CM-β-CD) on the surface of porous core-shell magnetic Fe3O4@flower like TiO2 microspheres (Fe3O4@fTiO2-CMCD), used as a carrier. The main factors (adsorbent amount, adsorption time, elution solvent, elution volume, and elution flow rate) affecting the extraction efficiency were investigated in detail. The adsorbent exhibited high loading capacity (25.6 mg g(-1) for 1,3-dichlorobenzene). This maybe due to meso-/macroporous TiO2 having high specific surface area; as a carrier of the β-cyclodextrin film, it could obviously increase the number of recognition sites. The newly developed adsorbent also showed good selectivity towards chlorobenzenes based on host-guest interactions between β-cyclodextrin (on adsorbent's surface) and targets, which can minimize complex matrix interference in soil samples. The proposed method was successfully applied for the analysis of environmental soil samples with recovery ranging from 87.3 to 104.3%. All target compounds showed good linearities with correlation coefficients (r) higher than 0.996. The limits of quantitation for the 6 CBs were 0.03-0.09 μg kg(-1). These findings confirmed meso-/macroporous structure Fe3O4@fTiO2-CMCD as a highly effective extraction material for use in trace CB analyses in complex soil samples.

  4. 树脂法提取野酸梅皮色素工艺研究%Macroporous Resin Adsorption for Purification of Pigments from Wild Plum Skins and Their Stability

    Institute of Scientific and Technical Information of China (English)

    李紫薇; 欧阳艳; 腊萍; 张学荣; 马晓荣

    2012-01-01

    研究大孔树脂分离纯化野酸梅皮色素的条件与方法,并对树脂法所得色素的性质进行检测。结果表明:D101树脂对野酸梅皮色素的吸附效果最佳,以体积分数80%乙醇溶液作洗脱剂洗脱效果较好;野酸梅果皮色素在酸性条件T(pH≤4)较为稳定,耐光、热性较差;金属离子Al^3+、Fe^3+、Mg^2+、Cu^2+、Na^+对野酸梅果皮色素有不同程度的降色作用。%The purification of pigments from wild plum skins was studied by macroporous resin adsorption. Macroporous resin type DI01 showed the best adsorption effect on pigments from wild plum skins among the resins tested, and the best elution results were achieved using 80% ethanol solution. Pigments from wild plum skins were stable under acidic conditions (pH ~〈 4), but unstable when exposed to light and heat.Al^3+、Fe^3+、Mg^2+、Cu^2+and Na^+had obvious hypochromic effect on the pigments.

  5. Dynamic adsorption and desorption characteristics of D208 macroporous resin to heparin sodium%D208大孔径树脂对肝素钠动态吸附与解吸特性研究

    Institute of Scientific and Technical Information of China (English)

    葛庆丰; 周雷; 于海; 王捷; 汪志君

    2011-01-01

    Based on preliminary tests, D208 macroporous resin was optimized to extract heparin sodium. Dynamic adsorption and desorption characteristics of D208 macroporous resin for heparin sodium was studied to determine the best process condition for getting most heparin sodium. The results indicated that the best adsorption effect could be obtained at 2 mL · min-1 of adsorption flow rate, 6 mg · mL-1 of sample content and pH 8. 5 condition, and the optimum desorption condition was 5 bed volume 3 mol · L-1 sodium chloride solution as elution solveni, and 1 mL · min-1 of desorption flow rate, and the best desorption effect was achieved.%在前期试验基础上,以优选出的D208大孔径树脂提取、分离肝素钠,通过对D208大孔径树脂不同条件下动态吸附与解吸特性的研究,确定D208大孔径树脂提取、分离肝素钠的最佳工艺条件.结果表明:吸附流速为2 mL· min-1,上样浓度为6 mg·mL-1,上样溶液pH值为8.5,树脂对肝素钠的吸附效果最佳.用5倍柱床体积3 mol·L-1氯化钠溶液为洗脱液,洗脱速度为1 mL· min-1,洗脱效果最佳.

  6. 大孔吸附树脂对牛蒡子中牛蒡苷的纯化工艺研究%Study on Purification of Arctiin from Arctium lappa by Macroporous Resin

    Institute of Scientific and Technical Information of China (English)

    孙瑜; 何凡; 窦德强; 康廷国

    2011-01-01

    Objective:To establish an appropriate and technical process for the purification of Arctium lappa by macroporous resins. Method: The HPLC was used to analyze the content of arctiin in A. lappa, and the adsorption behavior of macroporous resins to arctiin in A. lappa was examined for the adsorption rate and desorption rate. Result: The D101 resin was the suitable for enriching arctiin. The sample concentration of arctiin was 28.69 g·L-1 with the elution flow rate of 3 BV·h-1. 5 BV water and 10 BV 30% ethanol were used as eluant of arcttin,respectively. Portions of 30% ethanol were collected, concentrated, and dried. Conclusion: This method is simple and feasible with good effect of enrichment in arctiin.%目的:优选出牛蒡子药材醇提液经树脂纯化的最佳工艺条件.方法:用高效液相色谱法测定牛蒡苷的含量,用树脂吸附率、解析率为指标考查大孔吸附树脂对牛蒡苷的吸附行为.结果:D101树脂对牛蒡苷提取液纯化最优,上样液牛蒡苷浓度为28.69g·L-1,洗脱流速3 BV·h-1,用蒸馏水5 BV洗脱,然后用30%乙醇10 BV洗脱,收集洗脱液,浓缩、干燥,即得到牛蒡苷总苷.结论:该方法简单、可行,能够用来富集纯化牛蒡子中牛蒡苷.

  7. A Preliminary Study on the Effect of Macro Cavities Formation on Properties of Carbon Nanotube Bucky-Paper Composites

    Directory of Open Access Journals (Sweden)

    Stephen Gray

    2011-03-01

    Full Text Available In this study, we focus on processing and characterizing composite material structures made of carbon nanotubes (CNTs and reproducibly engineering macro-pores inside their structure. Highly porous bucky-papers were fabricated from pure carbon nanotubes by dispersing and stabilizing large 1 μm polystyrene beads within a carbon nanotube suspension. The polystyrene beads, homogeneously dispersed across the thickness of the bucky-papers, were then either dissolved or carbonized to generate macro cavities of different shape and properties. The impact of adding these macro cavities on the porosity, specific surface area and Young’s modulus was investigated and some benefits of the macro cavities will be demonstrated.

  8. Atmospheric composition

    Science.gov (United States)

    Daniels, G. E.

    1973-01-01

    The earth's atmosphere is made up of a number of gases in different relative amounts. Near sea level and up to about 90 km, the amount of these atmospheric gases in clean, relatively dry air is practically constant. Four of these gases, nitrogen, oxygen, argon, and carbon dioxide, make up 99.99 percent by volume of the atmosphere. Two gases, ozone and water vapor, change in relative amounts, but the total amount of these two is very small compared to the amount of the other gases. The atmospheric composition shown in a table can be considered valid up to 90 km geometric altitude. Above 90 km, mainly because of molecular dissociation and diffusive separation, the composition changes.

  9. Composites Strengthening.

    Science.gov (United States)

    1987-11-01

    present in the plane surface of the object, the straight interference The central portion of the compacted bands are deflected by the furrow and the sample...by the matrix that surrounds without difficulty. Although short composite the central portion. Two regions can be cylinders have the same symmetry as...cnisuite construit un modilc theoriquc, base sur la rnthodc d’Eshelby. pour pr~dire Ics contraintes thermiques r~siducllcs Acy. Nous avons obtenu un tr

  10. Responses of mesenchymal stem cell to chitosan-coralline composites microstructured using coralline as gas forming agent.

    Science.gov (United States)

    Gravel, Mylène; Gross, Talia; Vago, Razi; Tabrizian, Maryam

    2006-03-01

    Macroporous composites made of coralline:chitosan with new microstructural features were studied for their scaffolding potential in in vitro bone regeneration. By using different ratios of natural coralline powder, as in situ gas forming agent and reinforcing phase, followed by freeze-drying, scaffolds with controlled porosity and pore structure were prepared and cultured with mesenchymal stem cells (MSCs). Their supportive activity of cellular attachment, proliferation and differentiation were assessed through cell morphology studies, DNA content, alkaline phosphatase (ALP) activity and osteocalcin (OC) release. The coralline scaffolds showed by far the highest evaluation of cell number and ALP activity over all the other chitosan-based scaffolds. They were the only material on which the OC protein was released throughout the study. When used as a component of the chitosan composite scaffolds, these coralline's favourable properties seemed to improve the overall performance of the chitosan. Distinct cell morphology and osteoblastic phenotype expression were observed depending on the coralline-to-chitosan ratios composing the scaffolds. The coralline-chitosan composite scaffolds containing high coralline ratios generally showed higher total cell number, ALP activity and OC protein expression comparing to chitosan scaffolds. The results of this study strongly suggest that coralline:chitosan composite, especially those having a high coralline content, may enhance adhesion, proliferation and osteogenic differentiation of MSCs in comparison with pure chitosan. Coralline:chitosan composites could therefore be used as attractive scaffolds for developing new strategies for in vitro tissue engineering.

  11. Fabrication of mesoporous titania-zirconia composite membranes based on nanoparticles improved hydrosol.

    Science.gov (United States)

    Yin, Yiling; Wang, Hui; Li, Dan; Jing, Wenheng; Fan, Yiqun; Xing, Weihong

    2016-09-15

    A novel method for the fabrication of mesoporous titania-zirconia (TiO2ZrO2) composite membranes was successfully developed based on nanoparticles (NPs) improved hydrosol. ZrO2 hydrosols were synthesized through a straightforward sol-gel route using zirconium oxychloride. Compared to the polymeric sol route, this method was found to be more environmentally friendly because organic solvent was not required. Further, highly hydrophilic TiO2 NPs of 10-20nm were well dispersed in the sol and effectively reduced the sol infiltrating into the channels of the support layer by a "bridging" effect. After a rapid evaporation process, a mixed matrix gel was formed on the surface of the support. The dynamic mechanical analysis results showed that the toughness and stiffness of the gel were significantly strengthened, which was beneficial to reduce the risk of membrane cracking. So, an integrated, crack-free mesoporous TiO2ZrO2 composite membrane was obtained by directly coating and sintering the mixture on a macroporous support. It showed that the composite membrane delivered better separation performance though the filtration test. The water flux, molecular weight cutoff, and average pore size of the synthesized membrane were 60Lm(-2)h(-1)bar(-1), 4704Da, and 3.5nm, respectively.

  12. Concrete compositions and methods

    Science.gov (United States)

    Chen, Irvin; Lee, Patricia Tung; Patterson, Joshua

    2015-06-23

    Provided herein are compositions, methods, and systems for cementitious compositions containing calcium carbonate compositions and aggregate. The compositions find use in a variety of applications, including use in a variety of building materials and building applications.

  13. Composition: 3 Piano Pieces

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2017-01-01

    3 Piano Pieces is a collection of open composition to be realised by an improvising pianist. See more about my composition practise in the entry "Composition - General Introduction".......3 Piano Pieces is a collection of open composition to be realised by an improvising pianist. See more about my composition practise in the entry "Composition - General Introduction"....

  14. Enrichment of water-soluble constituents in Danshen (Radix Salviae Miltiorrhizae) with macroporous resin*%大孔树脂富集丹参水溶性有效成分的工艺研究

    Institute of Scientific and Technical Information of China (English)

    周琳; 吴清; 刘晓帆

    2011-01-01

    Objective To study the enriching technique for 3 active principles in the water extract of Danshen (Radix Salviae Miltiorrhizae), salvanic acid A sodium, protocatechualdehyde and salvianolic acid B, by macroporous resin. Methods The content changes of 3 active principles were detected by HPLC before and after the separation taken the summed content of salvianic acid A sodium,protocatechualdehyde and salvianolic acid B as index. The types, concentration of sample solution, pH values, volume of sample, and concentration, quantity and flow velocity of eluant were observed by using the single factor investigation method. Results The parameters of the best purification technique were as follows: the concentration of sample solution was 1 g/mL according to the volume of sample ( 1.1 g/mL, crude medicinal volume to resin volume) and pH value was 3. The sample solution was rested on the macroporous adsorption resin column of D101, and eluted with deionized water of 5 BV at a flow velocity of 0. 5 mL/min and then eluted again with 40% alcohol of 6 BV at a flow velocity of 0. 5 mL/min. The content of total salvianolic acid was 85% in the obtained fine product and the transfer rate was as high as 70%. Conclusion Macroporous resin of D101 can improve the purification technique, remove impurities and increase the quantity of active principles in crude extract.%目的 考察利用大孔树脂富集丹参水提取液中有效成分丹参素钠、原儿茶醛和丹酚酸B的工艺方法.方法 以丹参素钠、原儿茶醛和丹酚酸B含量之和为指标,HPLC检测分离前后有效成分的含量变化.采用单因素考察法对树脂种类、上样溶液浓度、pH值、上样量、洗脱剂浓度、用量和流速等进行考察.结果 最佳纯化工艺参数为:按1.1g/mL(生药量/树脂量)的上样量配制浓度为1g/mL的上样溶液,调其pH值为3,上D101型大孔吸附树脂柱,采用去离子水以0.5 mL/min的流速,洗脱5倍体积(BV),然后再用6 BV

  15. Separation and Purification of Oridonin by Macro-porous Resin and Silica Column Chromatography%大孔吸附树脂联用硅胶柱层析法分离纯化冬凌草甲素

    Institute of Scientific and Technical Information of China (English)

    何建峰; 邬泉周; 黄少梅

    2012-01-01

    目的:建立大孔吸附树脂联用硅胶柱层析法分离纯化冬凌草甲素的工艺流程.方法:将冬凌草粉碎,用95%乙醇提取,浓缩成浸膏;以冬凌草甲素含量为指标,采用大孔吸附树脂联用硅胶柱层析法分离纯化冬凌草甲素,并用红外光谱、熔点测定和高效液相色谱(HPLC)法对重结晶产品的纯度和结构进行分析和表征.结果:优化的工艺为采用苯乙烯型大孔吸附树脂(HZ-841)先对浸膏进行粗分离,再选取乙酸乙酯-石油醚(6∶4,V/V)为洗脱溶剂,石油醚-丙酮(2∶3,VV)为重结晶溶剂进行硅胶柱分离纯化,在此条件下,得到的冬凌草甲素含量为96.11%,提取率达到0.86%.结论:所选工艺简单、可行,使用溶剂安全、无毒,提取效率高,可用于分离纯化冬凌草甲素.%OBJECTIVE: To establish macro-porous resin and silica column chromatography for the separation and purification of oridonin. METHODS: Rabdosia rubescens was shattered and extracted with 95% ethanol, then concentrated to extract. Taking the content of oridonin as index, the oridonin was separated and purified by macro-porous resin and silica column chromatography. The structure and purity of the recrystallized products were analyzed and characterized with IR spectra, smelting point and HPLC. RESULTS: The optimal technology was as follows: polystyrene-type macroporous absorbing resins (HZ-841) was used to separate extract roughly and silica column was used for purification with acetic ether-petroleum benzin(6:4, V/V) as elution solvent and petroleum benzin-acetone(2 : 3, V/V). Under this condition, the content of oridonin was 96.11% and the extraction ratio reached to 0.86‰. CONCLUSIONS: The technology is simple and feasible, and solvents used are safe and non-toxic with high extraction efficient. It can be used for the separation and purification of oridonin.

  16. Composition decomposition

    DEFF Research Database (Denmark)

    Dyson, Mark

    2003-01-01

    This PhD is based on constructing and resolving a set of modular problems. Each problem exists as a separate entity. Each has its own characteristics, yet when combined with other, related problems, provides a dimension to a story. The relationships and order between problems has priority over....... Not only have design tools changed character, but also the processes associated with them. Today, the composition of problems and their decomposition into parcels of information, calls for a new paradigm. This paradigm builds on the networking of agents and specialisations, and the paths of communication...... that are necessary to make sense out of any design situation. The hypothesis of this project, is that Design organisation, communication and CAD-information processes must be jointly reengineered to create the dynamic structures needed for the forward projection of design knowledge into this expanding Design network....

  17. Lubricant composition

    Energy Technology Data Exchange (ETDEWEB)

    Baile, G.H.

    1980-12-16

    Lubricating compositions and shaped articles composed thereof are described which consist essentially of about 30 to about 60% by weight of an oil of lubricating viscosity, about 20 to about 50% by weight of a high molecular weight polymer, and about 20 about 50% by weight of a heat conductive agent capable of conducting heat away from a bearing surface where it is generated. The high molecular weight polymer may, for example, be polyethylene, having average molecular weights in the range from about 1.0 X 105 to about 5.0 X 106. The oil may be a mineral oil, a diester oil or preferably a synthetic hydrocarbon oil having a viscosity in the range from about 13 to about 1200 mm''/s (Mm2/s) at 38/sup 0/C. (100/sup 0/F.) the heat conductive agent may be powdered zinc oxide, aluminum powder, or equivalents thereof in this invention. The compositions are semi-rigid gels which may be formed in a mold and used as is, or which may be shaped further after molding. The gels are formed by blending the heat conductive agent and polymer and then blending that mixture with the oil and heating to a temperature above the softening temperature of the polymer for a period of time (About 5 to about 75 minutes) sufficient that the mixture will form a firm, tough solid gel on cooling having an oily surface provided by oil exuding from the gel thus producing a lubricative mass operable for extended periods of time. The heat conductive substance dispersed in the gel aids in dissipating heat produced at the bearing surfaces during use thus improving the performance of the gel both in withstanding higher bulk operating temperatures and in resisting breakdown of the gel under prolonged use.

  18. 低成本大孔陶瓷膜支撑体的制备与表征%PREPARATION AND CHARACTERIZATION OF LOW COST MACROPOROUS SUPPORT FOR CERAMIC MEMBRANE

    Institute of Sci