WorldWideScience

Sample records for machinery spaces windows

  1. 46 CFR 32.56-25 - Category A machinery spaces: Windows and port lights-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Category A machinery spaces: Windows and port lights-T... SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Structural Fire Protection for Tank Ships With a Keel Laying Date On or After January 1, 1975 § 32.56-25 Category A machinery spaces: Windows and port...

  2. 46 CFR 58.01-45 - Machinery space, ventilation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Machinery space, ventilation. 58.01-45 Section 58.01-45... MACHINERY AND RELATED SYSTEMS General Requirements § 58.01-45 Machinery space, ventilation. Each machinery space must be ventilated to ensure that, when machinery or boilers are operating at full power in...

  3. 46 CFR 174.195 - Bulkheads in machinery spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Bulkheads in machinery spaces. 174.195 Section 174.195... in machinery spaces. (a) The bulkhead in each machinery space of each OSV must be watertight to the bulkhead deck. (b) Each penetration of, and each opening in, a bulkhead in a machinery space must— (1)...

  4. 46 CFR 42.15-35 - Machinery space openings.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Machinery space openings. 42.15-35 Section 42.15-35... BY SEA Conditions of Assignment of Freeboard § 42.15-35 Machinery space openings. (a) Machinery space..., funnel, or machinery space ventilators in an exposed position on the freeboard or superstructure...

  5. 46 CFR 45.149 - Machinery space openings.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Machinery space openings. 45.149 Section 45.149 Shipping... Assignment § 45.149 Machinery space openings. (a) Machinery space openings in position 1 or 2 must be framed... funnel or machinery space ventilator that must be kept open for the essential operations of the ship...

  6. New Window to Space

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Ground has been broken for a new space launch complex in Hainan Province china on September 14 began building a space launch center on tropical Hainan Island and continued to construct the foundations for the nation’s sophisticated space program.

  7. 46 CFR 185.352 - Ventilation of gasoline machinery spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Ventilation of gasoline machinery spaces. 185.352 Section 185.352 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS... machinery spaces. The mechanical exhaust for the ventilation of a gasoline machinery space, required...

  8. 46 CFR 171.095 - Machinery space bulkhead.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Machinery space bulkhead. 171.095 Section 171.095... PERTAINING TO VESSELS CARRYING PASSENGERS Additional Subdivision Requirements § 171.095 Machinery space... transverse watertight bulkheads to separate the machinery space from the remainder of the vessel....

  9. 46 CFR 111.103-3 - Machinery space ventilation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Machinery space ventilation. 111.103-3 Section 111.103-3...-GENERAL REQUIREMENTS Remote Stopping Systems § 111.103-3 Machinery space ventilation. (a) Each machinery space ventilation system must have two controls to stop the ventilation, one of which may be the...

  10. 33 CFR 157.39 - Machinery space bilges.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Machinery space bilges. 157.39... Vessel Operation § 157.39 Machinery space bilges. (a) A tank vessel may discharge an oily mixture from a machinery space bilge that is combined with an oil cargo residue if the vessel discharges in compliance...

  11. 46 CFR 169.631 - Separation of machinery and fuel tank spaces from accommodation spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Separation of machinery and fuel tank spaces from...) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Machinery and Electrical Ventilation § 169.631 Separation of machinery and fuel tank spaces from accommodation spaces. (a) Machinery and fuel tank spaces must...

  12. 46 CFR 30.10-42 - Machinery space-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Machinery space-TB/ALL. 30.10-42 Section 30.10-42...-42 Machinery space—TB/ALL. The term machinery space means any space that contains machinery and related equipment including Category A machinery spaces, propelling machinery, boilers, oil fuel...

  13. 46 CFR 119.465 - Ventilation of spaces containing diesel machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Ventilation of spaces containing diesel machinery. 119... MACHINERY INSTALLATION Specific Machinery Requirements § 119.465 Ventilation of spaces containing diesel machinery. (a) A space containing diesel machinery must be fitted with adequate means, such as...

  14. 46 CFR 58.01-50 - Machinery space, noise.

    Science.gov (United States)

    2010-10-01

    ... around machinery—90 dB(A) (c) If adding a source of noise would cause a machinery space to exceed the... isolated so that the space does not exceed that noise level. If the space is manned, a refuge from noise...

  15. Machinery

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ China Council for the Promotion of International Trade, Machin-ery Sub-Council (referred to as CCPIT MSC) & China Chamber of International Commerce, Machinery Chamber of Commerce was founded in 1988 as one of the first group of industrial trade promotion agencies approved by the governing authorities of China.

  16. 46 CFR 169.315 - Ventilation (other than machinery spaces).

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Ventilation (other than machinery spaces). 169.315 Section 169.315 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction and Arrangement Hull Structure § 169.315 Ventilation (other than...

  17. 46 CFR 153.233 - Separation of tanks from machinery, service and other spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Separation of tanks from machinery, service and other... Design and Equipment Cargo Containment Systems § 153.233 Separation of tanks from machinery, service and... joint: (1) Machinery spaces. (2) Service spaces. (3) Accommodation spaces. (4) Spaces for...

  18. An Evaluation of Aerosol Extinguishing Systems for Machinery Space Applications

    Science.gov (United States)

    2006-02-01

    MSC/Cir. 1007) “Guidelines for the Approval of Fixed Aerosol Fire-Extinguishing Systems Equivalent to Fixed Gas Fire -Extinguishing Systems...Committee/Circular (MSC/Circ.) 1007 “Guidelines for the Approval of Fixed Aerosol Fire-Extinguishing Systems Equivalent to Fixed Gas Fire -Extinguishing...combustibles in machinery spaces. This test is also required in the approval of both halocarbon and inert gas fire extinguishing systems. These issues

  19. 46 CFR 30.10-6a - Category A machinery space-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Category A machinery space-TB/ALL. 30.10-6a Section 30... Definitions § 30.10-6a Category A machinery space—TB/ALL. The term Category A machinery space means any space and trunks and ducts to such a space that contains: (a) Internal combustion machinery used for...

  20. 46 CFR 174.200 - Damaged stability in machinery spaces for all OSVs.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Damaged stability in machinery spaces for all OSVs. 174... Vessels § 174.200 Damaged stability in machinery spaces for all OSVs. Each OSV must be shown by design... case of damage between any two watertight bulkheads in each machinery space....

  1. 46 CFR 116.620 - Ventilation of machinery and fuel tank spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Ventilation of machinery and fuel tank spaces. 116.620... AND ARRANGEMENT Ventilation § 116.620 Ventilation of machinery and fuel tank spaces. In addition to the requirements of this subpart, ventilation systems for spaces containing machinery or fuel...

  2. 46 CFR 32.56-30 - Category A machinery spaces: Bulkheads and decks-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Category A machinery spaces: Bulkheads and decks-T/ALL... EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Structural Fire Protection for Tank Ships With a Keel Laying Date On or After January 1, 1975 § 32.56-30 Category A machinery spaces: Bulkheads and decks—T/ALL....

  3. 46 CFR 32.56-40 - Category A machinery spaces: Insulation-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Category A machinery spaces: Insulation-T/ALL. 32.56-40..., MACHINERY, AND HULL REQUIREMENTS Structural Fire Protection for Tank Ships With a Keel Laying Date On or After January 1, 1975 § 32.56-40 Category A machinery spaces: Insulation—T/ALL. Structural...

  4. 46 CFR 182.465 - Ventilation of spaces containing diesel machinery.

    Science.gov (United States)

    2010-10-01

    ..., with ventilation installations in accordance with ABYC H-32 (incorporated by reference; see 46 CFR 175... 46 Shipping 7 2010-10-01 2010-10-01 false Ventilation of spaces containing diesel machinery. 182... VESSELS (UNDER 100 GROSS TONS) MACHINERY INSTALLATION Specific Machinery Requirements §...

  5. 46 CFR 177.620 - Ventilation of machinery and fuel tank spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Ventilation of machinery and fuel tank spaces. 177.620... (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Ventilation § 177.620 Ventilation of machinery and... containing machinery or fuel tanks must comply with the requirements of part 182 of this chapter....

  6. 46 CFR 111.103-1 - Power ventilation systems except machinery space ventilation systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Power ventilation systems except machinery space ventilation systems. 111.103-1 Section 111.103-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... Power ventilation systems except machinery space ventilation systems. Each power ventilation system...

  7. Replicate periodic windows in the parameter space of driven oscillators

    Energy Technology Data Exchange (ETDEWEB)

    Medeiros, E.S., E-mail: esm@if.usp.br [Instituto de Fisica, Universidade de Sao Paulo, Sao Paulo (Brazil); Souza, S.L.T. de [Universidade Federal de Sao Joao del-Rei, Campus Alto Paraopeba, Minas Gerais (Brazil); Medrano-T, R.O. [Departamento de Ciencias Exatas e da Terra, Universidade Federal de Sao Paulo, Diadema, Sao Paulo (Brazil); Caldas, I.L. [Instituto de Fisica, Universidade de Sao Paulo, Sao Paulo (Brazil)

    2011-11-15

    Highlights: > We apply a weak harmonic perturbation to control chaos in two driven oscillators. > We find replicate periodic windows in the driven oscillator parameter space. > We find that the periodic window replication is associated with the chaos control. - Abstract: In the bi-dimensional parameter space of driven oscillators, shrimp-shaped periodic windows are immersed in chaotic regions. For two of these oscillators, namely, Duffing and Josephson junction, we show that a weak harmonic perturbation replicates these periodic windows giving rise to parameter regions correspondent to periodic orbits. The new windows are composed of parameters whose periodic orbits have the same periodicity and pattern of stable and unstable periodic orbits already existent for the unperturbed oscillator. Moreover, these unstable periodic orbits are embedded in chaotic attractors in phase space regions where the new stable orbits are identified. Thus, the observed periodic window replication is an effective oscillator control process, once chaotic orbits are replaced by regular ones.

  8. Formation of Temperature Mode in Internal Spaces of Armored Machinery

    Directory of Open Access Journals (Sweden)

    P. I. Dziachek

    2010-01-01

    Full Text Available An algorithm and a program  have been developed for calculation of temperature mode in a T-72 tank tower while using numerical methods. The paper reveals a satisfactory convergence of calculated and experimental data. The results pertaining to investigation of influence of various factors on the processes of temperature mode formation in the internal surfaces of the studied object are presented in the paper. The obtained results make it possible to develop technical solutions in respect of protection against condensation of water vapor on the internal surfaces of armored machinery.

  9. Designing for Virtual Windows in a Deep Space Habitat

    Science.gov (United States)

    Howe, A. Scott; Howard, Robert L.; Moore, Nathan; Amoroso, Michael

    2013-01-01

    This paper discusses configurations and test analogs toward the design of a virtual window capability in a Deep Space Habitat. Long-duration space missions will require crews to remain in the confines of a spacecraft for extended periods of time, with possible harmful effects if a crewmember cannot cope with the small habitable volume. Virtual windows expand perceived volume using a minimal amount of image projection equipment and computing resources, and allow a limited immersion in remote environments. Uses for the virtual window include: live or augmented reality views of the external environment; flight deck, piloting, observation, or other participation in remote missions through live transmission of cameras mounted to remote vehicles; pre-recorded background views of nature areas, seasonal occurrences, or cultural events; and pre-recorded events such as birthdays, anniversaries, and other meaningful events prepared by ground support and families of the crewmembers.

  10. Designing for Virtual Windows in a Deep Space Habitat

    Science.gov (United States)

    Howe, A. Scott; Howard, Robert L.; Moore, Nathan; Amoroso, Michael

    2013-01-01

    This paper discusses configurations and test analogs toward the design of a virtual window capability in a Deep Space Habitat. Long-duration space missions will require crews to remain in the confines of a spacecraft for extended periods of time, with possible harmful effects if a crewmember cannot cope with the small habitable volume. Virtual windows expand perceived volume using a minimal amount of image projection equipment and computing resources, and allow a limited immersion in remote environments. Uses for the virtual window include: live or augmented reality views of the external environment; flight deck, piloting, observation, or other participation in remote missions through live transmission of cameras mounted to remote vehicles; pre-recorded background views of nature areas, seasonal occurrences, or cultural events; and pre-recorded events such as birthdays, anniversaries, and other meaningful events prepared by ground support and families of the crewmembers.

  11. 46 CFR 182.460 - Ventilation of spaces containing machinery powered by, or fuel tanks for, gasoline.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Ventilation of spaces containing machinery powered by, or fuel tanks for, gasoline. 182.460 Section 182.460 Shipping COAST GUARD, DEPARTMENT OF HOMELAND..., gasoline. (a) A space containing machinery powered by, or fuel tanks for, gasoline must have a...

  12. 33 CFR 155.400 - Platform machinery space drainage on oceangoing fixed and floating drilling rigs and other...

    Science.gov (United States)

    2010-07-01

    ... Elimination System (NPDES) permit issued in accordance with section 402 of the Clean Water Act and 40 CFR... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Platform machinery space drainage... machinery space drainage on oceangoing fixed and floating drilling rigs and other platforms. (a) No...

  13. Windows

    DEFF Research Database (Denmark)

    Heiselberg, Per; Svidt, Kjeld; Nielsen, Peter V.

    In natural ventilation systems fresh air is often provided through opening of windows. However, the knowledge of the performance of windows is rather limited. Computation of natural ventilation air flow through windows is most commonly made using discharge coefficients, that are regarded as being...... constant. The reported results show that the discharge coefficient for a window opening cannot be regarded as a constant and that it varies considerably with the size of the opening area, the window type and the temperature difference. Therefore, the use of a constant value can lead to serious errors...

  14. Windows to the world, doors to the space

    DEFF Research Database (Denmark)

    Vogler, A.; Jørgensen, Jesper

    2005-01-01

    functionality with mental representation and symbolic meaning. Space-connection interfaces such as doors and windows act as “sensory organs” of a building. They allow inside-out communication, but also allow the user to control the flow of light and air, which in a direct or indirect way are communication......Living in a confined environment with minimal external stimuli available, such as a space habitat, is a strain on normal human life and puts great pressure on groups and individuals. Designers working on a space habitat not only must work on its functional role, but also must integrate...... mediums. In this paper the authors advocate a closer connection among architecture, anthropology and psychology in designing space habitats as part of a new concept of environmental design strategy in space architecture....

  15. Combined Pressure and Thermal Window System for Space Vehicles

    Science.gov (United States)

    Svartstrom, Kirk Nils (Inventor)

    2017-01-01

    A window system for a vehicle comprising a pressure and thermal window pane, a seal system, and a retainer system. The pressure and thermal window pane may be configured to provide desired pressure protection and desired thermal protection when exposed to an environment around the vehicle during operation of the vehicle. The pressure and thermal window pane may have a desired ductility. The seal system may be configured to contact the pressure and thermal window pane to seal the pressure and thermal window pane. The retainer system may be configured to hold the seal system and the pressure and thermal window pane.

  16. Hybrid Windows and Mosaic Video: Reducing Complexity of Space Habitable Modules Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Windows in habitable modules represent significant design and operations impacts to future spacecraft, yet viewing requirements, both electronic and passive,...

  17. EEMD Independent Extraction for Mixing Features of Rotating Machinery Reconstructed in Phase Space

    Directory of Open Access Journals (Sweden)

    Zaichao Ma

    2015-04-01

    Full Text Available Empirical Mode Decomposition (EMD, due to its adaptive decomposition property for the non-linear and non-stationary signals, has been widely used in vibration analyses for rotating machinery. However, EMD suffers from mode mixing, which is difficult to extract features independently. Although the improved EMD, well known as the ensemble EMD (EEMD, has been proposed, mode mixing is alleviated only to a certain degree. Moreover, EEMD needs to determine the amplitude of added noise. In this paper, we propose Phase Space Ensemble Empirical Mode Decomposition (PSEEMD integrating Phase Space Reconstruction (PSR and Manifold Learning (ML for modifying EEMD. We also provide the principle and detailed procedure of PSEEMD, and the analyses on a simulation signal and an actual vibration signal derived from a rubbing rotor are performed. The results show that PSEEMD is more efficient and convenient than EEMD in extracting the mixing features from the investigated signal and in optimizing the amplitude of the necessary added noise. Additionally PSEEMD can extract the weak features interfered with a certain amount of noise.

  18. Leading Textile Machinery Manufacturers Snap up ITMA ASIA + CITME 2012 Exhibition Space

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Despite the current global economic slowdown, leading textile machinery manufacturers around the world are still attracted to prospects offered by the world's largest textile producer - China. This can be seen from the overwhelming response received by the combined textile machinery show,

  19. Traversing Time and Space from the Blessing Window

    Science.gov (United States)

    Huang, Ya-Ling

    2013-02-01

    The visual graphics for the holographic artwork "Blessing Window" were created from observations of Tainan city, with a focus on the beauty of Chinese characters, their typographic. The concept of movement in the artwork is from a traditional Chinese philosophy, "When the mountain does not move, the road extends, when the road does not extend to the destination, the heart will extend". One multiplex-hologram and an interactive installation were used to combine the visual concepts of typography and the philosophy.

  20. Attitude-dependent launch window analysis for the Hubble Space Telescope Mission

    Science.gov (United States)

    Lenio, James A.

    1990-01-01

    Launch window analysis for Space Shuttle missions determines the launch times which will ensure that all payload and Shuttle requirements for the mission are met. Attitude and pointing analysis determines Shuttle Orbiter attitudes that meet various communication, viewing, and thermal requirements for the Orbiter and its payloads. Historically, launch window analysis and attitude and pointing analysis for Shuttle missions have been done separately, without directly influencing each other. However, methods have been developed to consider simultaneously dependencies between launch window and attitude and pointing requirements if they arise. These methods were developed from the launch window analysis for STS-31, the Hubble Space Telescope (HST) deployment mission. To release the HST, the Orbiter attitude had to remain inertially fixed while pointing the HST at the Sun. The Orbiter release attitude and the HST release time were determined from the position of the Sun and varied with launch time and launch date. The launch window analysis for STS-31 centered on how to determine the range of launch times for a given launch date that would allow the Shuttle to release the HST and simultaneously satisfy communication, attitude, and lighting requirements for the deployment operations. Discussed here are how the HST deployment requirements determined the launch window and how the Orbiter release attitude affected the launch window.

  1. Machinery running state identification based on discriminant semi-supervised local tangent space alignment for feature fusion and extraction

    Science.gov (United States)

    Su, Zuqiang; Xiao, Hong; Zhang, Yi; Tang, Baoping; Jiang, Yonghua

    2017-04-01

    Extraction of sensitive features is a challenging but key task in data-driven machinery running state identification. Aimed at solving this problem, a method for machinery running state identification that applies discriminant semi-supervised local tangent space alignment (DSS-LTSA) for feature fusion and extraction is proposed. Firstly, in order to extract more distinct features, the vibration signals are decomposed by wavelet packet decomposition WPD, and a mixed-domain feature set consisted of statistical features, autoregressive (AR) model coefficients, instantaneous amplitude Shannon entropy and WPD energy spectrum is extracted to comprehensively characterize the properties of machinery running state(s). Then, the mixed-dimension feature set is inputted into DSS-LTSA for feature fusion and extraction to eliminate redundant information and interference noise. The proposed DSS-LTSA can extract intrinsic structure information of both labeled and unlabeled state samples, and as a result the over-fitting problem of supervised manifold learning and blindness problem of unsupervised manifold learning are overcome. Simultaneously, class discrimination information is integrated within the dimension reduction process in a semi-supervised manner to improve sensitivity of the extracted fusion features. Lastly, the extracted fusion features are inputted into a pattern recognition algorithm to achieve the running state identification. The effectiveness of the proposed method is verified by a running state identification case in a gearbox, and the results confirm the improved accuracy of the running state identification.

  2. An in-orbit Thermal Design of Optical Window in Space Solar Telescope

    Science.gov (United States)

    Zhu, R.; Zhang, H. Y.

    2016-09-01

    The complex space environment will influence the space solar telescope during its in-orbit operation, and the imaging quality of optical system which behind the telescope will be affected directly by the temperature change of the optical window. The purpose of the thermal design is to ensure that all the parts of the optical window keep their temperature in a normal range, what is more, is able to keep the telescope in the working condition rapidly and complete the operation of the whole cycle after the earth shadow is ended. In order to obtain the temperature distribution and the variation tendency of the window under the space thermal load in the whole cycle, steady state simulation analysis and transient state simulation analysis of the window with and without heating during the earth shadow are needed. A good thermal control result is obtained via comparing the two kinds of transient state simulation analysis results of the temperature distribution, and the appropriate thermal control measures are applied to the window.

  3. Passivating Window/First Layer AR Coating for Space Solar Cells

    Science.gov (United States)

    Faur, Mircea; Faur, Maria; Bailey, S. G.; Flood, D. J.; Brinker, D. J.; Alterovitz, S. A.; Wheeler, D. R.; Matesscu, G.; Goradia, C.; Goradia, M.

    2004-01-01

    Chemically grown oxides, if well designed, offer excellent surface passivation of the emitter surface of space solar cells and can be used as effective passivating window/first layer AR coating. In this paper, we demonstrate the effectiveness of using a simple room temperature wet chemical technique to grow cost effective passivating layers on solar cell front surfaces after the front grid metallization step. These passivating layers can be grown both on planar and porous surfaces. Our results show that these oxide layers: (i) can effectively passivate the from the surface, (ii) can serve as an effective optical window/first layer AR coating, (iii) are chemically, thermally and UV stable, and (iv) have the potential of improving the BOL and especially the EOL efficiency of space solar cells. The potential of using this concept to simplify the III-V based space cell heterostructures while increasing their BOL and EOL efficiency is also discussed.

  4. VLSI Architectures for Sliding-Window-Based Space-Time Turbo Trellis Code Decoders

    Directory of Open Access Journals (Sweden)

    Georgios Passas

    2012-01-01

    Full Text Available The VLSI implementation of SISO-MAP decoders used for traditional iterative turbo coding has been investigated in the literature. In this paper, a complete architectural model of a space-time turbo code receiver that includes elementary decoders is presented. These architectures are based on newly proposed building blocks such as a recursive add-compare-select-offset (ACSO unit, A-, B-, Γ-, and LLR output calculation modules. Measurements of complexity and decoding delay of several sliding-window-technique-based MAP decoder architectures and a proposed parameter set lead to defining equations and comparison between those architectures.

  5. Dynamic Model Averaging in Large Model Spaces Using Dynamic Occam’s Window*

    Science.gov (United States)

    Onorante, Luca; Raftery, Adrian E.

    2015-01-01

    Bayesian model averaging has become a widely used approach to accounting for uncertainty about the structural form of the model generating the data. When data arrive sequentially and the generating model can change over time, Dynamic Model Averaging (DMA) extends model averaging to deal with this situation. Often in macroeconomics, however, many candidate explanatory variables are available and the number of possible models becomes too large for DMA to be applied in its original form. We propose a new method for this situation which allows us to perform DMA without considering the whole model space, but using a subset of models and dynamically optimizing the choice of models at each point in time. This yields a dynamic form of Occam’s window. We evaluate the method in the context of the problem of nowcasting GDP in the Euro area. We find that its forecasting performance compares well with that of other methods. PMID:26917859

  6. 46 CFR 130.450 - Machinery alarms.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Machinery alarms. 130.450 Section 130.450 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS VESSEL CONTROL, AND MISCELLANEOUS EQUIPMENT AND SYSTEMS Automation of Unattended Machinery Spaces § 130.450 Machinery alarms....

  7. 交货期窗口下小批量食品机械制造车间柔性调度%Research on flexible scheduling problem of small sized food machinery manufacturing job shop with due-date window

    Institute of Scientific and Technical Information of China (English)

    宋娟

    2012-01-01

    生产调度是保证制造车间生产有序、稳定运行的决定性因素,传统算法很难针对多目标柔性调度问题进行建模和有效求解.在此提出一种动态交货期窗口下基于遗传算法和模拟退火算法的混合式智能优化算法,并针对该类大规模组合优化问题进行建模仿真,采用著名的FT06 Benchmark对该算法的调度性能进行基准测试.结果表明,所提出混合式优化算法针对多目标,小批量食品机械制造车间柔性调度问题搜索效率高,质量稳定,具有较好地全局优化能力.%Food processing and packaging machinery industry is an important technical foundation for the food industry. With higher requirements for food variety and quality, it is urgent for the food machinery manufacturing industry to innovate and update the traditional techniques. The production scheduling is a key of success in the orderly and stable job-shop production. The traditional scheduling method is hard to model and solve the multi-objective combinatorial optimizations in realistic manufacturing system. In this paper an hybrid optimal algorithm,integrating genttic algorithm with simulated annealing algorithm, is developed to optimize flexible scheduling objective of E/T with due-date window. In addition,mathematical model is established. To testify optimization feasibility,the proposed approach has been simulated on FT06 benchmarks. Simulation results show that the proposed can effectively improve search efficiency,achieve better solution quality and global optimization.

  8. Contaminations of inner surface of magnesium fluoride windows in the `Expose-R' experiment on the International Space Station

    Science.gov (United States)

    Skurat, V. E.

    2017-10-01

    A series of experiments was carried out previously on board of the International Space Station in `EXPOSE-R', a multi-user expose facility, provided by European Space Agency attached to the external surface of the Russian Segment. In one experiment, spores of microorganisms and species of higher plant seeds, in heat-sealed polymer bags were irradiated by solar radiation passed through MgF2 windows in a high space vacuum. After sample exposure, it was found that in many cases the inner surfaces of windows were contaminated. Analysis of the contamination revealed the presence of chemical groups CH2, CH3, NH, OH, C═O, Si-CH3 (Demets et al. in 2015). Their presence in deposits was explained by photofixation of gaseous precursors - some of the vapours of glues and additives in polymeric materials in the core facility of `Expose-R'. Carbon-, oxygen- and silicon-containing groups may be deposited from outer intrinsic atmosphere. This atmosphere is connected with sample compartments and core facility. However, the presence of NH groups on inner surfaces of windows was not expected. This paper shows that the process responsible for carbon-, nitrogen- and oxygen-containing group formation can be a photopolymerization of caprolactam, which is released from the outer Nylon 6 layer of polymer bags under Solar vacuum ultraviolet radiation.

  9. 46 CFR 169.625 - Compartments containing diesel machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Compartments containing diesel machinery. 169.625... SCHOOL VESSELS Machinery and Electrical Ventilation § 169.625 Compartments containing diesel machinery. (a) Spaces containing machinery must be fitted with adequate dripproof ventilators, trunks,...

  10. Oh, What a Pane! An Inquiry Based on Activity with a Mathematical Approach to Investigation Windows on Earth...and in Space. Teacher Guide

    Science.gov (United States)

    Baker, Marshalyn; Mailhot, Michele; Graff, Paige Valderrama

    2010-01-01

    This is a teacher's guide to assist teachers in developing modules on windows for use in both earth and space and astronaut photographs. Activities incorporating mathematical exercises are suggested for grades five through ten.

  11. DPOAEs in infants developmentally exposed to PCBs show two differently time spaced exposure sensitive windows.

    Science.gov (United States)

    Koštiaková, Vladimíra; Moleti, Arturo; Wimmerová, Soňa; Jusko, Todd A; Palkovičová Murínová, Ľubica; Sisto, Renata; Richterová, Denisa; Kováč, Ján; Čonka, Kamil; Patayová, Henrieta; Tihányi, Juraj; Trnovec, Tomáš

    2016-10-01

    The study aim was to identify the timing of sensitive windows for ototoxicity related to perinatal exposure to PCBs. A total of 351 and 214 children from a birth cohort in eastern Slovakia underwent otoacoustic testing at 45 and 72 months, respectively, and distortion product otoacoustic emissions (DPOAEs) at 11 frequencies were recorded. Cord and child 6-, 16-, 45-, and 72- month blood samples were analyzed for PCB 153 concentration. The PCB 153 concentration-time profiles were approximated with a system model to calculate area under the PCB*time curves (AUCs) for specific time intervals (3 and 6 months for 45 and 72 months data, respectively). DPOAE amplitudes were correlated (Spearman) with cord serum PCB and AUCs, markers of prenatal and postnatal exposure, respectively. Two exposure critical windows were identified in infants, the first related to prenatal and early postnatal and the second to postnatal exposure to PCBs. Our data have shown tonotopicity, sexual dimorphism, and asymmetry in ototoxicity of PCBs.

  12. Windows to the Universe: an Internet Resource Bringing the Earth and Space Sciences to the General Public

    Science.gov (United States)

    Johnson, R. M.; Alexander, C. J.; Burek, M.; Kozyra, J.; Lenhart, E.; Linker, J.; Mastie, D.; Ceritelli, M.; Thoenes, H.; Orselli, P.; Weymouth, T.

    1997-07-01

    Windows to the Universe is a World Wide Web site that presents information about the Earth and Space sciences as well as related historical and cultural topics to the general public in an attractive and user-friendly way. The site makes extensive use of graphically annotated button panels to allow intuitive navigation through the site. The site is graphics intensive, providing access to a rich archive of images, movies, animations and data collected by satellites, spacecraft, and ground-based instruments. Intended primarily as an innovative information resource for museums, libraries, and classrooms, content within Windows to the Universe is developed to complement K-12 science education needs. Content is available at three levels of sophistication, approximating the elementary, middle, and high school levels, and resources are available on-line for teachers including standards-based keyword search capabilities and classroom activities. Supplementary CD-ROMs are available for Mac and Windows-95 platforms that allow rapid access to images on the site, rather than requiring the user to download images over the Internet. This award-winning site is funded by the NASA Public Use of Remote Sensing Data Bases Program.

  13. Inventions on Displaying and Resizing Windows

    OpenAIRE

    Mishra, Umakant

    2014-01-01

    Windows are used quite frequently in a GUI environment. The greatest advantage of using windows is that each window creates a virtual screen space. Hence, although the physical screen space is limited to a few inches, use of windows can create unlimited screen space to display innumerable items. The use of windows facilitates the user to open and interact with multiple programs or documents simultaneously in different windows. Sometimes a single program may also open multiple windows to displ...

  14. Far-Infrared Space Interferometers: Future Windows on Star and Planet Formation

    Science.gov (United States)

    Leisawitz, David

    2004-01-01

    Far-IR space interferometers will provide observational access to a spectral region containing many important cooling and diagnostic spectral lines and the bulk of the thermal emission from dust at angular scales critical to advancing our understanding of the star and planet formation process. We will describe concepts for the Space Infrared Interferometric Telescope (SPIRIT) and the Submillimeter Probe of the Evolution of Cosmic Structure (SPECS). Both of these candidate NASA missions are imaging and spectral Michelson interferometers operating in the wavelength range -40 - 800 microns. SPIRIT, which could be launched in a decade as a NASA Origins Probe, is built on a deployable boom and has a maximum baseline length of -30 - 50 m, yielding sub-arcsecond resolution in the far-IR. SPIRIT will thus provide far-IR/sub-mm measurements complementary to the near- and mid-IR measurements obtainable with the James Webb Space Telescope (JWST), and well matched to JWST observations in angular resolution. Ultimately SPECS, a NASA Vision Mission, will use formation flying to attain baseline lengths up to 1 km, and thus angular resolution comparable to that of the Hubble Space Telescope and the Atacama Large Millimeter Array. We will report preliminary results of the NASA-sponsored SPIRIT and SPECS mission studies, which are now underway.

  15. 46 CFR 130.460 - Placement of machinery alarms.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Placement of machinery alarms. 130.460 Section 130.460..., AND MISCELLANEOUS EQUIPMENT AND SYSTEMS Automation of Unattended Machinery Spaces § 130.460 Placement of machinery alarms. (a) Visible and audible alarms must be installed at the pilothouse to...

  16. Material Behavior of Window 7 Carrier Panel Tiles and Thermal Pane Fragments Recovered from the Space Shuttle Columbia

    Science.gov (United States)

    Arellano, Brenda R.

    Since the end of the space shuttle program, a new generation spacecraft has been developed to transport humans back into space. NASA's Orion will carry a crew beyond low-earth orbit and the exploration of Mars may be possible in the future. Space safety becomes significant with human spaceflight and the risks are high. However, aerospace materials may provide opportunities to prevent future disasters. When the space shuttle Columbia disintegrated during re-entry in 2001, thousands of debris were collected for analysis. In contrast, when the Challenger space shuttle broke apart in 1986, all shuttle debris were buried. These tragic disasters are reminders of the importance of proper material selection and the concern of their performance in service. This research focused on investigating the effects of the debris recovered from the Columbia space shuttle after re-entry and break-up. Many of the components encountered unforeseen extreme temperatures, vibrations, and high stresses. The Columbia debris contained unique characteristics that have yet to be examined and the components for this study are the thermal protection system (TPS) carrier panel tiles and the thermal pane glass from the starboard orbiter Window 7. The alterations endured by the debris was studied through forensic materials characterization to investigate material interactions, material degradation, and thermal consequences. These materials played an essential role in the operation of the orbiter as they protected the underlying structural materials of the shuttle and underwent extreme temperatures. The methods and procedures for analyzing the debris included non-destructive and destructive evaluations. Non-destructive evaluations involved visual inspection, photographic documentation, 3D modeling, and surface elemental composition. The destructive analysis consisted of sectioning, scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy

  17. Improving machinery reliability

    CERN Document Server

    Bloch, Heinz P

    1998-01-01

    This totally revised, updated and expanded edition provides proven techniques and procedures that extend machinery life, reduce maintenance costs, and achieve optimum machinery reliability. This essential text clearly describes the reliability improvement and failure avoidance steps practiced by best-of-class process plants in the U.S. and Europe.

  18. Windows Azure

    CERN Document Server

    Johnson, Bruce; Chambers, James; Garber, Danny; Malik, Jamal; Fazio, Adam

    2013-01-01

    A collection of five must-have Azure titles, from some of the biggest names in the field Available individually, but at a discounted rate for the collection, this bundle of five e-books covers key developer and IT topics of Windows Azure, including ASP.NET, mobile services, web sites, data storage, and the hybrid cloud. A host of Microsoft employees and MPVs come together to cover the biggest challenges that professionals face when working with Windows Azure. The e-books included are as follows: Windows Azure and ASP.NET MVC MigrationWindows Azure Mobile ServicesWindows Azure Web SitesWindows

  19. 46 CFR 62.50-20 - Additional requirements for minimally attended machinery plants.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Additional requirements for minimally attended machinery... requirements for minimally attended machinery plants. Note: Minimally attended machinery plants include vessel machinery plants and spaces that are automated, but not to a degree where the plant could be left...

  20. 46 CFR 169.629 - Compartments containing gasoline machinery or fuel tanks.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Compartments containing gasoline machinery or fuel tanks... SCHOOLS SAILING SCHOOL VESSELS Machinery and Electrical Ventilation § 169.629 Compartments containing gasoline machinery or fuel tanks. Spaces containing gasoline machinery or fuel tanks must have...

  1. Window Stories

    DEFF Research Database (Denmark)

    Hauge, Bettina

    This research project has investigated 17 households in Germany (cities and rural areas). The main aim was to learn about the significance of the window to these people: What they think of their windows, how, when and why they use them in their everyday life, if they have a favorite window and why...

  2. Finding optimal solutions for vehicle routing problem with pickup and delivery services with time windows: A dynamic programming approach based on state-space-time network representations

    OpenAIRE

    2015-01-01

    Optimization of on-demand transportation systems and ride-sharing services involves solving a class of complex vehicle routing problems with pickup and delivery with time windows (VRPPDTW). This paper first proposes a new time-discretized multi-commodity network flow model for the VRPPDTW based on the integration of vehicles carrying states within space-time transportation networks, so as to allow a joint optimization of passenger-to-vehicle assignment and turn-by-turn routing in congested tr...

  3. Windows with improved energy performances

    DEFF Research Database (Denmark)

    Laustsen, Jacob Birck; Svendsen, Svend

    2003-01-01

    Heat loss through windows represents a considerable part of the total heat loss from houses. However, apart from providing daylight access and view, windows offer a unique potential for solar gain to be exploited during the heating season. Until now valuation of the energy performance of windows...... resulted in a window with a positive net energy gain (in short the Net Gain Window), which means that it contributes to the space heating of the building. All improvements are based on existing technology and manufacturing methods. The results from this work show that the energy performances of windows can...

  4. Cavitation in Hydraulic Machinery

    Energy Technology Data Exchange (ETDEWEB)

    Kjeldsen, M.

    1996-11-01

    The main purpose of this doctoral thesis on cavitation in hydraulic machinery is to change focus towards the coupling of non-stationary flow phenomena and cavitation. It is argued that, in addition to turbulence, superimposed sound pressure fluctuations can have a major impact on cavitation and lead to particularly severe erosion. For the design of hydraulic devices this finding may indicate how to further limit the cavitation problems. Chapter 1 reviews cavitation in general in the context of hydraulic machinery, emphasizing the initial cavitation event and the role of the water quality. Chapter 2 discusses the existence of pressure fluctuations for situations common in such machinery. Chapter 3 on cavitation dynamics presents an algorithm for calculating the nucleation of a cavity cluster. Chapter 4 describes the equipment used in this work. 53 refs., 55 figs.,10 tabs.

  5. Bacterial mitotic machineries

    DEFF Research Database (Denmark)

    Gerdes, Kenn; Møller-Jensen, Jakob; Ebersbach, Gitte

    2004-01-01

    Here, we review recent progress that yields fundamental new insight into the molecular mechanisms behind plasmid and chromosome segregation in prokaryotic cells. In particular, we describe how prokaryotic actin homologs form mitotic machineries that segregate DNA before cell division. Thus, the P...

  6. Vibration of hydraulic machinery

    CERN Document Server

    Wu, Yulin; Liu, Shuhong; Dou, Hua-Shu; Qian, Zhongdong

    2013-01-01

    Vibration of Hydraulic Machinery deals with the vibration problem which has significant influence on the safety and reliable operation of hydraulic machinery. It provides new achievements and the latest developments in these areas, even in the basic areas of this subject. The present book covers the fundamentals of mechanical vibration and rotordynamics as well as their main numerical models and analysis methods for the vibration prediction. The mechanical and hydraulic excitations to the vibration are analyzed, and the pressure fluctuations induced by the unsteady turbulent flow is predicted in order to obtain the unsteady loads. This book also discusses the loads, constraint conditions and the elastic and damping characters of the mechanical system, the structure dynamic analysis, the rotor dynamic analysis and the system instability of hydraulic machines, including the illustration of monitoring system for the instability and the vibration in hydraulic units. All the problems are necessary for vibration pr...

  7. Improved Windows for Cold Climates

    DEFF Research Database (Denmark)

    Laustsen, Jacob Birck; Svendsen, Svend

    2005-01-01

    A large part of the energy consumption in countries in Nordic and Arctic climates is used for space heating in buildings. In typical buildings the windows are responsible for a considerable part of the heat losses. Therefore there is a large potential for energy savings by developing and using...... windows with improved energy performance. Traditionally evaluation of the energy performance of windows has focussed on the thermal transmittance, but as windows differ from the rest of the building envelope by allowing solar energy to enter the building, the total solar energy transmittance is equally...... of the heating demand in typical single-family houses in Denmark and Greenland. The examined windows are typical new windows from Nordic countries and new proposals of improved windows with low thermal transmittance and high total solar energy transmittance. The results show that net energy gain can be increased...

  8. Improved Windows for Cold Climates

    DEFF Research Database (Denmark)

    Laustsen, Jacob Birck; Svendsen, Svend

    2005-01-01

    A large part of the energy consumption in countries in Nordic and Arctic climates is used for space heating in buildings. In typical buildings the windows are responsible for a con-siderable part of the heat losses. Therefore there is a large potential for energy savings by developing and using...... windows with improved energy performance. Traditionally evaluation of the energy performance of windows has focused on the thermal transmittance, but as windows differ from the rest of the building envelope by allowing solar energy to enter the building, the total solar energy transmittance is equally...... important. In the heating season in cold climates the solar gain through windows can be utilized for space heating which results in a corresponding reduction in the energy production that is often based on fossil fuels. A suitable quantity for evaluating the energy performance of windows in a simple...

  9. Improved Windows for Cold Climates

    DEFF Research Database (Denmark)

    Laustsen, Jacob Birck; Svendsen, Svend

    2005-01-01

    A large part of the energy consumption in countries in Nordic and Arctic climates is used for space heating in buildings. In typical buildings the windows are responsible for a considerable part of the heat losses. Therefore there is a large potential for energy savings by developing and using...... windows with improved energy performance. Traditionally evaluation of the energy performance of windows has focussed on the thermal transmittance, but as windows differ from the rest of the building envelope by allowing solar energy to enter the building, the total solar energy transmittance is equally...... important. In the heating season in cold climates the solar gain through windows can be utilized for space heating which results in a corresponding reduction in the energy production that is often based on fossil fuels. A suitable quantity for evaluating the energy perform-ance of windows in a simple...

  10. Window shopping

    Energy Technology Data Exchange (ETDEWEB)

    Best, D.

    1990-03-01

    The author addresses the energy efficiency of windows and describes changes and new products available in this consumer information article. Experiments currently being done by Lawrence Berkeley Laboratory (LBL), Bonneville Power Authority and the Washington State Energy Office show that some of these superwindows collect more energy from the sun than they let escape from inside the home. One type of window in current production is the low-E (low-emissivity) and the IGUs (insulated glass units). Low-E techniques include glazing of the glass with various materials including polyester and metallic coatings. Other measures include filling the airspace in double pane windows with argon, aerogel or by creating a vacuum in the airspace. Another factor the author considers is ultraviolet light protection.

  11. Parenthetical Windows

    DEFF Research Database (Denmark)

    Lemi, Esther; Triantafyllidis, Georgios

    2016-01-01

    Parenthetical Window is a project that engages scientific research in human perception providing a platform for users to experience their own limits and needs in their individual circadian rhythm. The presentation focuses on a case study in a community of dancers where the individual needs in light...... these for the construction of a final installation that focuses on the construction of a dark room that provides artificial stimuli through a window with only artificial information. The abstract translation of sound to image through artificial light is a common endeavour in the history of arts and its aesthetics, since...

  12. Bacterial mitotic machineries

    DEFF Research Database (Denmark)

    Gerdes, Kenn; Møller-Jensen, Jakob; Ebersbach, Gitte;

    2004-01-01

    Here, we review recent progress that yields fundamental new insight into the molecular mechanisms behind plasmid and chromosome segregation in prokaryotic cells. In particular, we describe how prokaryotic actin homologs form mitotic machineries that segregate DNA before cell division. Thus, the Par......M protein of plasmid R1 forms F actin-like filaments that separate and move plasmid DNA from mid-cell to the cell poles. Evidence from three different laboratories indicate that the morphogenetic MreB protein may be involved in segregation of the bacterial chromosome....

  13. The Luminaire Window

    DEFF Research Database (Denmark)

    Hansen, Ellen Kathrine

    2017-01-01

    The importance of dynamic daylight to support health and well-being has been more and more recognized. People in hospitals and health care environments have a specific need for optimized daylight conditions. Daylight penetration through window openings is crucial to stimulate circadian rhythm...... and maintain a healthy sleep-awake pattern. At the same time, the window can provide a pleasant view and connection to the surroundings and enhance the perception of the interior space and materials. All three factors are recognized as important for human well-being and health, but never the less...

  14. Fault tracking of rotating machinery under variable operation based on phase space warping*%变工况下旋转机械故障跟踪的相空间曲变方法*

    Institute of Scientific and Technical Information of China (English)

    范彬; 胡雷; 胡茑庆

    2013-01-01

    For fault prognosis of rotating machinery under variable operation, a fault tracking method based on phase space warping and smooth orthogonal decomposition (SOD) is presented to describe the degradation process of rotating machinery. Firstly, phase space is reconstructed using vibration time-series, and a tracking function of damage evolution is built by quantifying phase space warping. To compensate for cumulative model error and the error caused by variation of local probability distribution of the reference phase space points, the original time-series is partitioned into several data segments and the phase space is partitioned into several subspaces correspondingly. Several feature vectors are concatenated into tracking matrix. Secondly, the different trends caused by actual damage degradation and operation variety in the tracking matrix are separated by smooth orthogonal decomposition. According to smooth orthogonal values, dominant smooth orthogonal coordinates which reflect actual fault degradation trends are extracted. Finally, fault degradation process of bearing out-race is simulated. Rotating speed is varied during the degradation process. Applying the presented method to the degradation process tracking, the tracking matrix is built and decomposed by SOD, and the results show that the proposed method can track the evolution trend of the rotating machinery fault without the influence of operation condition variety.%  为实现在工况变化条件下对旋转机械的故障预测,提出使用相空间曲变和平滑正交分解理论在变工况条件下跟踪旋转机械的故障演化过程。首先在对目标系统的观测时间序列相空间重构的基础上,通过量化相空间曲变构建信号损伤演化的跟踪函数,为弥补累积模型误差和相空间点局部分布概率差异造成的误差,将时间序列和相空间进行分割,并以此构建跟踪矩阵;再利用平滑正交分解方法将跟踪矩阵中分别

  15. Dynamic organization of the mitochondrial protein import machinery.

    Science.gov (United States)

    Straub, Sebastian P; Stiller, Sebastian B; Wiedemann, Nils; Pfanner, Nikolaus

    2016-11-01

    Mitochondria contain elaborate machineries for the import of precursor proteins from the cytosol. The translocase of the outer mitochondrial membrane (TOM) performs the initial import of precursor proteins and transfers the precursors to downstream translocases, including the presequence translocase and the carrier translocase of the inner membrane, the mitochondrial import and assembly machinery of the intermembrane space, and the sorting and assembly machinery of the outer membrane. Although the protein translocases can function as separate entities in vitro, recent studies revealed a close and dynamic cooperation of the protein import machineries to facilitate efficient transfer of precursor proteins in vivo. In addition, protein translocases were found to transiently interact with distinct machineries that function in the respiratory chain or in the maintenance of mitochondrial membrane architecture. Mitochondrial protein import is embedded in a regulatory network that ensures protein biogenesis, membrane dynamics, bioenergetic activity and quality control.

  16. Matrix analysis of electrical machinery

    CERN Document Server

    Hancock, N N

    2013-01-01

    Matrix Analysis of Electrical Machinery, Second Edition is a 14-chapter edition that covers the systematic analysis of electrical machinery performance. This edition discusses the principles of various mathematical operations and their application to electrical machinery performance calculations. The introductory chapters deal with the matrix representation of algebraic equations and their application to static electrical networks. The following chapters describe the fundamentals of different transformers and rotating machines and present torque analysis in terms of the currents based on the p

  17. Pumping machinery theory and practice

    CERN Document Server

    Badr, Hassan M

    2014-01-01

    Pumping Machinery Theory and Practice comprehensively covers the theoretical foundation and applications of pumping machinery. Key features: Covers characteristics of centrifugal pumps, axial flow pumps and displacement pumpsConsiders pumping machinery performance and operational-type problemsCovers advanced topics in pumping machinery including multiphase flow principles, and two and three-phase flow pumping systemsCovers different methods of flow rate control and relevance to machine efficiency and energy consumptionCovers different methods of flow rate control and relevance to machine effi

  18. Skill Sheets for Agricultural Machinery.

    Science.gov (United States)

    Iowa State Univ. of Science and Technology, Ames. Dept. of Agricultural Education.

    This set of 21 skill sheets for agricultural machinery was developed for use in high school and vocational school agricultural mechanics programs. Each sheet covers a single operational procedure for a piece of agricultural machinery, and includes: (1) a diagram, (2) a step-by-step operational procedure, (3) abilities or understandings taught, (4)…

  19. Window Stories

    DEFF Research Database (Denmark)

    Hauge, Bettina

    strategies for overheating or to communicate with people in a more user informed way. The people participating in the study lived in different houses and had different backgrounds. They were involved in the project over a period of 3-4 months. The prolonged participation was facilitated through a variety......, as well as the opposite. The report also includes a special focus on overheating and people’s strategies against this. Knowing about what people appreciate in a window and their actual practices and the reasons for their behaviour may be useful in many different ways, for instance to inform public...

  20. Strategic Windows

    DEFF Research Database (Denmark)

    Risberg, Annette; King, David R.; Meglio, Olimpia

    We examine the importance of speed and timing in acquisitions with a framework that identifies management considerations for three interrelated acquisition phases (selection, deal closure and integration) from an acquiring firm’s perspective. Using a process perspective, we pinpoint items within...... acquisition phases that relate to speed. In particular, we present the idea of time-bounded strategic windows in acquisitions consistent with the notion of kairòs, where opportunities appear and must be pursued at the right time for success to occur....

  1. Window shopping

    OpenAIRE

    Shy, Oz

    2013-01-01

    The terms "window shopping" and "showrooming" refer to the activity in which potential buyers visit a brick-and-mortar store to examine a product but end up either not buying it or buying the product from an online retailer. This paper analyzes potential buyers who differ in their preference for after-sale service that is not offered by online retailers. For some buyers, making a trip to the brick-and-mortar store is costly; however, going to the store to examine the product has the advantage...

  2. Window shopping

    OpenAIRE

    SHY, Oz

    2013-01-01

    The terms "window shopping" and "showrooming" refer to the activity in which potential buyers visit a brick-and-mortar store to examine a product but end up either not buying it or buying the product from an online retailer. This paper analyzes potential buyers who differ in their preference for after-sale service that is not offered by online retailers. For some buyers, making a trip to the brick-and-mortar store is costly; however, going to the store to examine the product has the advantage...

  3. WebSpace - a WebWindows based gateway to the ANL LabSpace. Final report for period September 1, 1995 - August 31, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Furmanski, Wojtek

    2002-04-11

    The goal of this project was to prototype a Web based computational and collaboratory environment that would act as a commodity technologies based front-end or Gateway to larger HPC systems such as ANL LabSpace. The original name - WebSpace - proposed for such a system was taken during the course of this project by Silicon Graphics and used for their Web authoring environment. To avoid confusion, we changed the name of this project's system to WebFlow.

  4. Windows and lighting program

    Energy Technology Data Exchange (ETDEWEB)

    1990-06-01

    More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity -- factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout the indoor environment, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Windows and lighting are thus essential components of any comprehensive building science program. Despite important achievements in reducing building energy consumption over the past decade, significant additional savings are still possible. These will come from two complementary strategies: (1) improve building designs so that they effectively apply existing technologies and extend the market penetration of these technologies; and (2) develop advanced technologies that increase the savings potential of each application. Both the Windows and Daylighting Group and the Lighting System Research Group have made substantial contributions in each of these areas, and continue to do so through the ongoing research summarized here. 23 refs., 16 figs.

  5. Process window metrology

    Science.gov (United States)

    Ausschnitt, Christopher P.; Chu, William; Hadel, Linda M.; Ho, Hok; Talvi, Peter

    2000-06-01

    This paper is the third of a series that defines a new approach to in-line lithography control. The first paper described the use of optically measurable line-shortening targets to enhance signal-to-noise and reduce measurement time. The second described the dual-tone optical critical dimension (OCD) measurement and analysis necessary to distinguish dose and defocus. Here we describe the marriage of dual-tone OCD to SEM-CD metrology that comprises what we call 'process window metrology' (PWM), the means to locate each measured site in dose and focus space relative to the allowed process window. PWM provides in-line process tracking and control essential to the successful implementation of low-k lithography.

  6. Challenger Center's Window on the Universe

    Science.gov (United States)

    Livengood, T. A.; Goldstein, J. J.; Smith, S.; Bobrowsky, M.; Radnofsky, M.; Perelmuter, J.-M.; Jaggar, L.

    2001-11-01

    Challenger Center for Space Science Education's Window on the Universe program aims to create a network of under-served communities across the nation dedicated to sustained science, math, and technology education. Window communities presently include Broken Arrow, OK; Muncie, IN; Moscow, ID; Nogales, AZ; Tuskegee, AL; Marquette, MI; Altamont, KS; Washington, D.C.; and other emerging sites. Window uses themes of human space flight and the space sciences as interdisciplinary means to inspire entire communities. Practicing scientists and engineers engaged in these disciplines are invited to volunteer to become a part of these communities for a week, each visitor reaching roughly 2000 K-12 students through individual classroom visits and Family Science Night events during an intense Window on the Universe Week. In the same Window Week, Challenger Center scientists and educators present a workshop for local educators to provide training in the use of a K-12 educational module built around a particular space science and exploration theme. Window communities follow a 3-year development: Year 1, join the network, experience Window Week presented by Challenger Center and visiting researchers; Year 2, same as Year 1 plus workshop on partnering with local organizations to develop sources of visiting researchers and to enhance connections with local resources; Year 3 and subsequent, the community stages its own Window Week, with Challenger Center providing new education modules and training workshops for "master educators" from the Window community, after which the master educators return home to conduct training workshops of their own. Challenger Center remains a resource and clearinghouse for Window communities to acquire experience, technical information, and opportunities for distance collaboration with other Window communities. Window on the Universe is dedicated to assessing degree of success vs. failure in each program component and as a whole, using pre- and post

  7. 46 CFR 169.241 - Machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Machinery. 169.241 Section 169.241 Shipping COAST GUARD... Certification Inspections § 169.241 Machinery. (a) At each inspection for certification and periodic inspection.... Mechanisms are operationally tested and visually examined. (3) Auxiliary machinery. All machinery...

  8. Gasochromic windows

    Energy Technology Data Exchange (ETDEWEB)

    Wittwer, V.; Datz, M.; Ell, J.; Georg, A.; Graf, W.; Walze, G. [Fraunhofer Institute for Solar Energy Systems, Freiburg (Germany)

    2004-10-01

    Gasochromic windows can change their transmittance over a wide range. This change is caused by a thin layer of tungsten oxide (WO{sub 3}), covered by a very thin layer of platinum. Exposing this coating to diluted hydrogen gas leads to reduction of the WO{sub 3}, resulting in colouring. This process can be reversed by introducing diluted oxygen. The hydrogen and oxygen are produced by an electrolyser. Only small amounts of gas are needed for the switching process. The coatings are produced by sputtering. Water is needed in the WO{sub 3} films to allow rapid transport of the hydrogen. However, this water should not escape when the system is operated at higher temperatures, which can exceed 60 deg C. By adjusting the conditions of the sputtering process appropriately, a large amount of water can be incorporated in the films, which remains even up to temperatures above 100 deg C. The best transmittance values obtained for a coated double-glazed unit with a moderate film thickness (560 nm) and hydrogen concentrations below the combustion limit are 76% and 77% for solar and visual transmittance, respectively, in the bleached state and 5% and 6% for solar and visual transmittance, respectively, in the coloured state. Darker states can be obtained by applying thicker films of tungsten oxide without reducing the transmittance in the bleached state. Gasochromic coatings can also be deposited easily on plastic substrates and - because their coating structure is so simple - combined with prismatic microstructures, which allow light to be redirected. In addition, the gasochromic systems technology can be used with metal hydride systems. (Author)

  9. Textile Machinery: Imports Rebound Again

    Institute of Scientific and Technical Information of China (English)

    Zheng Yan

    2007-01-01

    @@ In the year of 2006, the general situation of China's textile machinery equipment imports had shown a clear sign of revival from the downward trend of two years ago, with a total annual import of 4.1 billion USD, an increase of 19.05% against the same period of 2005.

  10. Tractor & Machinery Safety. 1984 Revision.

    Science.gov (United States)

    Montana State Office of Public Instruction, Helena. Dept. of Vocational Education Services.

    This curriculum guide is intended for use in teaching an instructional unit in tractor and machinery safety that is geared toward college freshmen. Addressed in the individual lessons of the unit are the following topics: understanding the importance of safe and efficient tractor operation, understanding the characteristics of tractors, preparing…

  11. A novel method for condition monitoring of rotating machinery based on statistical linguistic analysis and weighted similarity measures

    Science.gov (United States)

    Lin, Jinshan; Dou, Chunhong

    2017-03-01

    Defective rotating machinery generally produces complex fluctuations due to non-stationary and nonlinear properties of dynamical systems. Consequently, dynamical structures of vibration data from rotating machinery are hard to disclose. As a result, condition monitoring of rotating machinery is fairly challenging. In this paper, statistical linguistic analysis (SLA), a novel tool for time series analysis, was introduced to analyze dynamical mechanisms hidden in vibration data of rotating machinery. SLA maps original vibration data from rotating machinery to a binary symbolic sequence by exploiting potential of increase and decreases of time intervals. Next, by sliding a window and identifying the elements in each window as a ;word;, a group of words is created. Then, by counting the occurrence of each word type, the binary symbolic sequence can be converted into a word frequency sequence. Next, a weighted similarity measure (WSM) defined in this paper serves to detect a change of running conditions of rotating machinery. As a result, this paper proposed a novel method for condition monitoring of rotating machinery based on SLA and WSM. Afterwards, the performance of the proposed method was validated using vibration data from both gearboxes and rolling bearings. Also, the proposed method was compared with conventional temporal statistical parameters, Approximate Entropy and Sample Entropy. The results indicate that the proposed method performs better than the other methods in condition monitoring of rotating machinery. Also, compared with either of Correlation Coefficients and Standardized Euclidean Distances, the WSM gives a somewhat better performance in reflecting a change of dynamical structures.

  12. Least Squares Moving-Window Spectral Analysis.

    Science.gov (United States)

    Lee, Young Jong

    2017-01-01

    Least squares regression is proposed as a moving-windows method for analysis of a series of spectra acquired as a function of external perturbation. The least squares moving-window (LSMW) method can be considered an extended form of the Savitzky-Golay differentiation for nonuniform perturbation spacing. LSMW is characterized in terms of moving-window size, perturbation spacing type, and intensity noise. Simulation results from LSMW are compared with results from other numerical differentiation methods, such as single-interval differentiation, autocorrelation moving-window, and perturbation correlation moving-window methods. It is demonstrated that this simple LSMW method can be useful for quantitative analysis of nonuniformly spaced spectral data with high frequency noise.

  13. Energy Savings Thanks to French Textile Machinery

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ The French Textile Machinery Manufacturers' Association (UCMTF) has presented, during a seminar it organized for textile professionals and students, the spectacular energy savings achieved thanks to state of the art machinery.

  14. Italian Textile Machinery Seminar in Bangladesh

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The Association of Italian Textile Machinery Manufacturers (ACIMIT) and the Italian Trade Commission will hold a technological seminar on "Italian textile machinery: the way to improve Bangladesh textile competitiveness"

  15. 30 CFR 56.14204 - Machinery lubrication.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Machinery lubrication. 56.14204 Section 56.14204 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Equipment Safety Practices and Operational Procedures § 56.14204 Machinery lubrication. Machinery...

  16. 30 CFR 57.14204 - Machinery lubrication.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Machinery lubrication. 57.14204 Section 57.14204 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Equipment Safety Practices and Operational Procedures § 57.14204 Machinery lubrication. Machinery...

  17. 46 CFR 176.804 - Machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Machinery. 176.804 Section 176.804 Shipping COAST GUARD... CERTIFICATION Material Inspections § 176.804 Machinery. At each initial and subsequent inspection for... ready for inspections of machinery, fuel, and piping systems, including the following: (a) Operation...

  18. Constraints on Relaxion Windows

    CERN Document Server

    Choi, Kiwoon

    2016-01-01

    We examine low energy phenomenology of the relaxion solution to the weak scale hierarchy problem. Assuming that the Hubble friction is responsible for the dissipation of relaxion energy, we identify the cosmological relaxion window which corresponds to the parameter region compatible with a given value of the acceptable number of inflationary $e$-foldings. We then discuss a variety of observational constraints on the relaxion window, while focusing on the case that the barrier potential to stabilize the relaxion is induced by new physics, rather than by low energy QCD dynamics. We find that majority of the parameter space with a relaxion mass $m_\\phi\\gtrsim 100$ eV or a relaxion decay constant $f\\lesssim 10^7$ GeV is excluded by existing constraints. There is an interesting small parameter region with $m_\\phi\\sim \\,0.2-1$ GeV and $f\\sim\\, {\\rm few}-10$ TeV, which is allowed by existing constraints, but can be probed soon by future beam dump experiment such as the SHiP experiment, or by improved EDM experiment...

  19. Windows平台下地址空间分布随机化技术研究及实现%ON RANDOMISATION OF ADDRESS SPACE LAYOUT ON WINDOWS PLATFORM AND ITS IMPLEMENTATION

    Institute of Scientific and Technical Information of China (English)

    韩万军; 王震宇

    2011-01-01

    The programs written with unsafe languages are likely to be attacked by buffer overflows,etc. Since the success of these attacks depends on whether the address layout of the process components is familiar with or not,therefore a countermeasure of memory attacks defending is to randomise the locations of the process components. Address space layout randomisation is an approach ior achieving randomisation of the process components addresses. In this paper we analyse the advantages and disadvantages of address space layout randomisation used by the Windows Vista operating system,and present a simplified solution for implementing the address randomisation on Windows XP operating system.%使用不安全语言编写的程序容易受到诸如缓冲区溢出等攻击.这些攻击成功与否取决于对进程组件地址的分布是否熟悉.因此,防御内存攻击的一个对策就是随机化进程组件位置.地址空间分布随机化就是实现进程组件地址随机化的一个方法.分析了Windows Vista操作系统采用的地址空间分布随机化的优点与不足之处,并提出了在Windows XP操作系统上实现地址随机化的简易方案.

  20. Windows 10 for dummies

    CERN Document Server

    Rathbone, Andy

    2015-01-01

    The fast and easy way to get up and running with Windows 10 Windows 10 For Dummies covers the latest version of Windows and gets you up and running with the changes and new features you'll find in this updated operating system. Packed with time-saving tips to help you get the most out of the software, this helpful Windows 10 guide shows you how to manage Windows tasks like navigating the interface with a mouse or touchscreen, connecting to the web, and troubleshooting problems and making quick fixes. Assuming no prior knowledge of the software, Windows 10 For Dummies addresses the updates to

  1. Windows 10 simplified

    CERN Document Server

    McFedries, Paul

    2015-01-01

    Learn Windows 10 quickly and painlessly with this beginner's guide Windows 10 Simplified is your absolute beginner's guide to the ins and outs of Windows. Fully updated to cover Windows 10, this highly visual guide covers all the new features in addition to the basics, giving you a one-stop resource for complete Windows 10 mastery. Every page features step-by-step screen shots and plain-English instructions that walk you through everything you need to know, no matter how new you are to Windows. You'll master the basics as you learn how to navigate the user interface, work with files, create

  2. MACHINERY

    African Journals Online (AJOL)

    Data were collected using a portable data acquisition system: SKF Microlog. Data were collected' ... Modelling (HMM) ofvibrational signals. ... trifugal pump designed for a pressure increase of. 6.6 bars at ..... These frequency amplitudes are located at the vertical. axial and .... distribution centre the residual chlorine concen-.

  3. Redefining the Axion Window

    Science.gov (United States)

    Di Luzio, Luca; Mescia, Federico; Nardi, Enrico

    2017-01-01

    A major goal of axion searches is to reach inside the parameter space region of realistic axion models. Currently, the boundaries of this region depend on somewhat arbitrary criteria, and it would be desirable to specify them in terms of precise phenomenological requirements. We consider hadronic axion models and classify the representations RQ of the new heavy quarks Q . By requiring that (i) the Q 's are sufficiently short lived to avoid issues with long-lived strongly interacting relics, (ii) no Landau poles are induced below the Planck scale; 15 cases are selected which define a phenomenologically preferred axion window bounded by a maximum (minimum) value of the axion-photon coupling about 2 times (4 times) larger than is commonly assumed. Allowing for more than one RQ, larger couplings, as well as complete axion-photon decoupling, become possible.

  4. Redefining the Axion Window

    CERN Document Server

    Di Luzio, Luca; Nardi, Enrico

    2016-01-01

    A major goal of axion searches is to reach inside the parameter space region of realistic axion models. Currently, the boundaries of this region depend on somewhat arbitrary criteria, and it would be desirable to specify them in terms of precise phenomenological requirements. We consider hadronic axion models and classify the representations $R_Q$ of the new heavy quarks $Q$. By requiring that $i)$ the $Q$ are sufficiently short lived to avoid issues with long lived strongly interacting relics, $ii)$ no Landau poles are induced below the Planck scale, fifteen cases are selected, which define a phenomenologically preferred axion window bounded by a maximum (minimum) value of the axion-photon coupling about twice (four times) larger than commonly assumed. Allowing for more than one $R_Q$, larger couplings, as well as complete axion-photon decoupling, become possible.

  5. Strategies for Improving Enterprise Standardization Management of Tropical Crop Machinery

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ There are two categories of tropical crop machinery. One comprises operation machinery that is used for planting, managing and harvesting tropical crops, while the other comprises process machinery for processing tropical crops. Tropical crop machinery is distinguished from other agricultural machinery by the special crops that such machinery cultivates and processes.

  6. Windows for Intel Macs

    CERN Document Server

    Ogasawara, Todd

    2008-01-01

    Even the most devoted Mac OS X user may need to use Windows XP, or may just be curious about XP and its applications. This Short Cut is a concise guide for OS X users who need to quickly get comfortable and become productive with Windows XP basics on their Macs. It covers: Security Networking ApplicationsMac users can easily install and use Windows thanks to Boot Camp and Parallels Desktop for Mac. Boot Camp lets an Intel-based Mac install and boot Windows XP on its own hard drive partition. Parallels Desktop for Mac uses virtualization technology to run Windows XP (or other operating systems

  7. Windows® Internals

    CERN Document Server

    Russinovich, Mark E; Ionescu, Alex

    2009-01-01

    See how the core components of the Windows operating system work behind the scenes-guided by a team of internationally renowned internals experts. Fully updated for Windows Server 2008 and Windows Vista, this classic guide delivers key architectural insights on system design, debugging, performance, and support-along with hands-on experiments to experience Windows internal behavior firsthand.Delve inside Windows architecture and internals:Understand how the core system and management mechanisms work-from the object manager to services to the registryExplore internal system data structures usin

  8. Windows 7 for dummies

    CERN Document Server

    Rathbone, Andy

    2010-01-01

    Get more done and have more fun with Windows 7 Windows 7 is loaded with features, tools, and shortcuts designedto make life easier for all users. This handy guide is sure to makeWindows as clear as can be. It helps you get started, use foldersand files, find handy gadgets, and search on your PC or online. Open the book and find: Ways to find photos, music, and video on your PCAdvice on jazzing up the Windows 7 interfaceReasons for making the switch to Windows 7Tools for staying organizedSteps for setting up your user accounts and passwords

  9. Advanced energy efficient windows

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund

    2007-01-01

    energy savings. In terms of energy, windows occupy a special position compared with other thermal envelope structures due to their many functions: 1) windows let daylight into the building and provide occupants with visual contact with their surroundings 2) windows protect against the outdoor climate 3......Windows should be paid special attention as they contribute a significant part of the total heat-loss coefficient of the building. Contrary to other parts of the thermal envelope the windows are not only heat loosers, but may gain heat in the day-time. Therefore there are possibilities for large......) windows transmit solar energy that may contribute to a reduction of energy consumption, but which may also lead to unpleasant overheating. In the following paragraphs the current use of windows is reviewed with an emphasis on energy, while special products like solar protection glazing and security...

  10. A Method of Rotating Machinery Fault Diagnosis Based on the Close Degree of Information Entropy

    Institute of Scientific and Technical Information of China (English)

    GENG Jun-bao; HUANG Shu-hong; JIN Jia-shan; CHEN Fei; LIU Wei

    2006-01-01

    This paper presents a method of rotating machinery fault diagnosis based on the close degree of information entropy. In the view of the information entropy, we introduce four information entropy features of the rotating machinery, which describe the vibration condition of the machinery. The four features are, respectively, denominated as singular spectrum entropy, power spectrum entropy, wavelet space state feature entropy and wavelet power spectrum entropy. The value scopes of the four information entropy features of the rotating machinery in some typical fault conditions are gained by experiments, which can be acted as the standard features of fault diagnosis. According to the principle of the shorter distance between the more similar models, the decision-making method based on the close degree of information entropy is put forward to deal with the recognition of fault patterns. We demonstrate the effectiveness of this approach in an instance involving the fault pattern recognition of some rotating machinery.

  11. Developing Process of Tropical Crop Machinery Standardization

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ General Situation Tropical crop machinery is a new special mechanical profession, which began to develop from 1950s to 1960s in China. Because the weather, soil and farm crops varieties in tropical region are greatly different from those in the other regions, most of the traditional farm machinery can't be directly used in tropical region or on the tropical crops. Tropical crop machinery needs a special design and manufacture. So some professional research institutes and education units were set up and some enterprises were built at that time, and the profession of tropical crop machinery was formed.

  12. Membrane manipulations by the ESCRT machinery.

    Science.gov (United States)

    Odorizzi, Greg

    2015-01-01

    The endosomal sorting complexes required for transport (ESCRTs) collectively comprise a machinery that was first known for its function in the degradation of transmembrane proteins in the endocytic pathway of eukaryotic cells. Since their discovery, however, ESCRTs have been recognized as playing important roles at the plasma membrane, which appears to be the original site of function for the ESCRT machinery. This article reviews some of the major research findings that have shaped our current understanding of how the ESCRT machinery controls membrane dynamics and considers new roles for the ESCRT machinery that might be driven by these mechanisms.

  13. Window company standardizes low-E glass

    Energy Technology Data Exchange (ETDEWEB)

    Trombly, J.

    Anderson Corporation announced in late 1989 that it would be standardizing low-emissivity (low-E) glass in all of its products, except the gliding windows and the basement/storm windows, starting in 1990. In addition, all its High-Performance glass ordered this year will automatically feature the argon gas filling between panes. (Filling the space between two glass panes with argon rather than air reduces the heat conduction of the window.) Low-E windows are glazed with a coating that bonds a microscopic, transparent, metallic substance to the inside surface of the double-pane windows, cutting down on the emission of long-wave infrared light, thereby reducing heat loss.

  14. Mastering Windows Server 2012 R2

    CERN Document Server

    Minasi, Mark; Booth, Christian; Butler, Robert; McCabe, John; Panek, Robert; Rice, Michael; Roth, Stefan

    2013-01-01

    Check out the new Hyper-V, find new and easier ways to remotely connect back into the office, or learn all about Storage Spaces-these are just a few of the features in Windows Server 2012 R2 that are explained in this updated edition from Windows authority Mark Minasi and a team of Windows Server experts led by Kevin Greene. This book gets you up to speed on all of the new features and functions of Windows Server, and includes real-world scenarios to put them in perspective. If you're a system administrator upgrading to, migrating to, or managing Windows Server 2012 R2, find what you need to

  15. COW test of the weak equivalence principle: A low-energy window to look into the noncommutative structure of space-time?

    CERN Document Server

    Saha, Anirban

    2014-01-01

    We construct the quantum mechanical model of the COW experiment assuming that the underlying space time has a granular structure, described by a canonical noncommutative algebra of coordinates $x^{\\mu}$. The time-space sector of the algebra is shown to add a mass-dependent contribution to the gravitational acceleration felt by neutron deBrogli waves measured in a COW experiment. This makes time-space noncommutativity a potential candidate for an apparent violation of WEP even if the ratio of the inertial mass $m_{i}$ and gravitational mass $m_{g}$ is a universal constant. The latest experimental result based on COW principle is shown to place an upper-bound several orders of magnitude stronger than the existing one on the time-space noncommutative parameter. We argue that the evidence of NC structure of space-time may be found if the COW-type experiment can be repeated with several particle species.

  16. Oils degradation in agricultural machinery

    Directory of Open Access Journals (Sweden)

    Vojtěch Kumbár

    2013-01-01

    Full Text Available Evaluating of oils condition in agricultural machinery is very important. With monitoring and evaluating we can prevent technical and economic losses. In this paper there were monitored the liquid lubricants taken from mobile thresher New Holland CX 860. Chemical and viscosity degradation of the lubricants were evaluated. Temperature dependence dynamic viscosity was observed in the range of temperature from −10 °C to 80 °C (for all oils. Considerable temperature dependence dynamic viscosity was found and demonstrated in case of all samples, which is in accordance with theoretical assumptions and literature data. Mathematical models were developed and tested. Temperature dependence dynamic viscosity was modeled using a polynomial 6th degree. The proposed models can be used for prediction of flow behavior of oils.

  17. Beginning Windows 8

    CERN Document Server

    Halsey, Mike

    2012-01-01

    Windows 8 has been described by Microsoft as its 'boldest' Windows release ever. Beginning Windows 8 takes you through the new features and helps you get more out of the familiar to reveal the possibilities for this amazing new operating system. You will learn, with non-technical language used throughout, how to get up and running in the new Windows interface, minimize downtime, maximize productivity, and harness the features you never knew existed to take control of your computer and enjoy the peace of mind and excitement that comes with it. From tips and tweaks to easy-to-follow guides and d

  18. Programming Windows Azure

    CERN Document Server

    Krishnan, Sriram

    2010-01-01

    Learn the nuts and bolts of cloud computing with Windows Azure, Microsoft's new Internet services platform. Written by a key member of the product development team, this book shows you how to build, deploy, host, and manage applications using Windows Azure's programming model and essential storage services. Chapters in Programming Windows Azure are organized to reflect the platform's buffet of services. The book's first half focuses on how to write and host application code on Windows Azure, while the second half explains all of the options you have for storing and accessing data on the plat

  19. Mastering Windows 7 Deployment

    CERN Document Server

    Finn, Aidan; van Surksum, Kenneth

    2011-01-01

    Get professional-level instruction on Windows 7 deployment tools Enterprise-level operating system deployment is challenging and requires knowledge of specific tools. It is expected that Windows 7 will be extensively deployed in businesses worldwide. This comprehensive Sybex guide provides thorough coverage of the Microsoft deployment tools that were specifically created for Windows 7, preparing system administrators, MIS professionals, and corporate programmers to tackle the task effectively.Companies worldwide are expected to deploy Windows 7 as their enterprise operating system; system admi

  20. Windows 8 secrets

    CERN Document Server

    Thurrott, Paul

    2012-01-01

    Tips, tricks, treats, and secrets revealed on Windows 8 Microsoft is introducing a major new release of its Windows operating system, Windows 8, and what better way to learn all its ins and outs than from two internationally recognized Windows experts and Microsoft insiders, authors Paul Thurrott and Rafael Rivera? They cut through the hype to get at useful information you'll not find anywhere else, including what role this new OS plays in a mobile and tablet world. Regardless of your level of knowledge, you'll discover little-known facts about how things work, what's new and different, and h

  1. The Olympic of Textile Machinery closed

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The five days 2012 China International Textile Machinery Exhibition ITMA Asia Exhibition, which attracted much attention from the industry, was closed at the Shanghai New International Expo Center on June 16, more than 1300 textile enterprises from nearly 30 countries around the world gathered on the exhibition, the world’s latest textile machinery technologies, crafts and equipments were also presented one by one.

  2. 46 CFR 115.804 - Machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Machinery. 115.804 Section 115.804 Shipping COAST GUARD....804 Machinery. At each initial and subsequent inspection for certification of a vessel, the owner or managing operator shall be prepared to conduct tests and have the vessel ready for inspections of...

  3. China Textile Machinery Expresses Self-Surpassing

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    It’s difficult to imagine that any sector of the textile industry has benefited more from innovations in the past 10 years than textile machinery. Advanced textile machinery has brought new life to the production segment of the business and fulfills the essential preconditions for economically efficient textile production.

  4. 46 CFR 58.01-40 - Machinery, angles of inclination.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Machinery, angles of inclination. 58.01-40 Section 58.01... AUXILIARY MACHINERY AND RELATED SYSTEMS General Requirements § 58.01-40 Machinery, angles of inclination. (a) Propulsion machinery and all auxiliary machinery essential to the propulsion and safety of the vessel must...

  5. Air transparent soundproof window

    Directory of Open Access Journals (Sweden)

    Sang-Hoon Kim

    2014-11-01

    Full Text Available A soundproof window or wall which is transparent to airflow is presented. The design is based on two wave theories: the theory of diffraction and the theory of acoustic metamaterials. It consists of a three-dimensional array of strong diffraction-type resonators with many holes centered on each individual resonator. The negative effective bulk modulus of the resonators produces evanescent wave, and at the same time the air holes with subwavelength diameter existed on the surfaces of the window for macroscopic air ventilation. The acoustic performance levels of two soundproof windows with air holes of 20mm and 50mm diameters were measured. The sound level was reduced by about 30 - 35dB in the frequency range of 400 - 5,000Hz with the 20mm window, and by about 20 - 35dB in the frequency range of 700 - 2,200Hz with the 50mm window. Multi stop-band was created by the multi-layers of the window. The attenuation length or the thickness of the window was limited by background noise. The effectiveness of the soundproof window with airflow was demonstrated by a real installation.

  6. Efficient Windows Collaborative

    Energy Technology Data Exchange (ETDEWEB)

    Nils Petermann

    2010-02-28

    The project goals covered both the residential and commercial windows markets and involved a range of audiences such as window manufacturers, builders, homeowners, design professionals, utilities, and public agencies. Essential goals included: (1) Creation of 'Master Toolkits' of information that integrate diverse tools, rating systems, and incentive programs, customized for key audiences such as window manufacturers, design professionals, and utility programs. (2) Delivery of education and outreach programs to multiple audiences through conference presentations, publication of articles for builders and other industry professionals, and targeted dissemination of efficient window curricula to professionals and students. (3) Design and implementation of mechanisms to encourage and track sales of more efficient products through the existing Window Products Database as an incentive for manufacturers to improve products and participate in programs such as NFRC and ENERGY STAR. (4) Development of utility incentive programs to promote more efficient residential and commercial windows. Partnership with regional and local entities on the development of programs and customized information to move the market toward the highest performing products. An overarching project goal was to ensure that different audiences adopt and use the developed information, design and promotion tools and thus increase the market penetration of energy efficient fenestration products. In particular, a crucial success criterion was to move gas and electric utilities to increase the promotion of energy efficient windows through demand side management programs as an important step toward increasing the market share of energy efficient windows.

  7. Color Wheel Windows

    Science.gov (United States)

    Leonard, Stephanie

    2012-01-01

    In this article, the author describes a painting and drawing lesson which was inspired by the beautiful circular windows found in cathedrals and churches (also known as "rose windows"). This two-week lesson would reinforce both the concept of symmetry and students' understanding of the color wheel. (Contains 1 online resource.)

  8. Multi-functional windows

    Science.gov (United States)

    Nag, Nagendra; Goldman, Lee M.; Balasubramanian, Sreeram; Sastri, Suri

    2013-06-01

    The requirements for modern aircraft are driving the need for conformal windows for future sensor systems. However, limitations on optical systems and the physical properties of optically transparent materials currently limit the geometry of existing windows and window assemblies to faceted assemblies of flat windows held in weight bearing frames. Novel material systems will have to be developed which combine different materials (e.g. ductile metals with transparent ceramics) into structures that combine transparency with structural integrity. Surmet's demonstrated ability to produce novel transparent ceramic/metal structures will allow us to produce such structures in the types of conformal shapes required for future aircraft applications. Furthermore, the ability to incorporate transparencies into such structures also holds out the promise of creating multi-functional windows which provide a broad range of capabilities that might include RF antennas and de-icing in addition to transparency. Recent results in this area will be presented.

  9. Visual merchandising window display

    Directory of Open Access Journals (Sweden)

    Opris (Cas. Stanila M.

    2013-12-01

    Full Text Available Window display plays a major part in the selling strategies; it does not only include the simple display of goods, nowadays it is a form of art, also having the purpose of sustaining the brand image. This article wants to reveal the tools that are essential in creating a fabulous window display. Being a window designer is not an easy job, you have to always think ahead trends, to have a sense of colour, to know how to use light to attract customers in the store after only one glance at the window. The big store window displays are theatre scenes: with expensive backgrounds, special effects and high fashion mannequins. The final role of the displays is to convince customers to enter the store and trigger the purchasing act which is the final goal of the retail activity.

  10. Stochastic noise in splicing machinery.

    Science.gov (United States)

    Melamud, Eugene; Moult, John

    2009-08-01

    The number of known alternative human isoforms has been increasing steadily with the amount of available transcription data. To date, over 100 000 isoforms have been detected in EST libraries, and at least 75% of human genes have at least one alternative isoform. In this paper, we propose that most alternative splicing events are the result of noise in the splicing process. We show that the number of isoforms and their abundance can be predicted by a simple stochastic noise model that takes into account two factors: the number of introns in a gene and the expression level of a gene. The results strongly support the hypothesis that most alternative splicing is a consequence of stochastic noise in the splicing machinery, and has no functional significance. The results are also consistent with error rates tuned to ensure that an adequate level of functional product is produced and to reduce the toxic effect of accumulation of misfolding proteins. Based on simulation of sampling of virtual cDNA libraries, we estimate that error rates range from 1 to 10% depending on the number of introns and the expression level of a gene.

  11. Rails on Windows

    CERN Document Server

    Hibbs, Curt

    2007-01-01

    It's no secret that the entire Ruby onRails core team uses OS X as their preferreddevelopment environment. Becauseof this, it is very easy to findauthoritative information on the webabout using Rails on OS X. But the truthis that Windows developers using Railsprobably outnumber those using otherplatforms. A Windows development environmentcan be just as productive asany other platform. This is a guide to developing with Rubyon Rails under Windows. It won't teachyou how to write Ruby on Rails web applications,but it will show you what toolsto use and how to set them up to createa complete Rail

  12. Windows 7 resource kit

    CERN Document Server

    Northrup, Tony; Honeycutt, Jerry; Wilson, Ed

    2009-01-01

    In-depth and comprehensive, this RESOURCE KIT delivers the information you need to administer your Windows 7 system. You get authoritative technical guidance from those who know the technology best-Microsoft Most Valuable Professionals (MVPs) and the Windows 7 product team-along with essential scripts and resources. In addition, "Direct from the Source" sidebars offer deep insights and troubleshooting tips from the Windows 7 team. Get expert guidance on how to: Use Microsoft Deployment Toolkit best practices and tools. Plan user-state migration and test application compatibility.

  13. Windows 8 simplified

    CERN Document Server

    McFedries, Paul

    2012-01-01

    The easiest way for visual learners to get started with Windows 8 The popular Simplified series makes visual learning easier than ever, and with more than 360,000 copies sold, previous Windows editions are among the bestselling Visual books. This guide goes straight to the point with easy-to-follow, two-page tutorials for each task. With full-color screen shots and step-by-step directions, it gets beginners up and running on the newest version of Windows right away. Learn to work with the new interface and improved Internet Explorer, manage files, share your computer, and much more. Perfect fo

  14. Windows 95 Beslutningsguide

    DEFF Research Database (Denmark)

    Sørensen, Jens Otto

    1996-01-01

    Mange virksomheder der bruger pc'er står netop nu over for valget: Skal vi fortsætte med DOS/Windows 3.x som operativsystem, eller skal vi skifte til efterfølgeren Windows 95? Skal vi/kan vi skifte successivt, eller skal det være en "alt eller intet beslutning". Hvornår er det rigtige tidspunkt...... at skifte? Denne artikel vil forsøge at give en baggrundsviden om Windows 95, der kan hjælpe virksomhederne igennem denne beslutningsfase....

  15. The Efficient Windows Collaborative

    Energy Technology Data Exchange (ETDEWEB)

    Petermann, Nils

    2006-03-31

    The Efficient Windows Collaborative (EWC) is a coalition of manufacturers, component suppliers, government agencies, research institutions, and others who partner to expand the market for energy efficient window products. Funded through a cooperative agreement with the U.S. Department of Energy, the EWC provides education, communication and outreach in order to transform the residential window market to 70% energy efficient products by 2005. Implementation of the EWC is managed by the Alliance to Save Energy, with support from the University of Minnesota and Lawrence Berkeley National Laboratory.

  16. Translational nanomedicine--through the therapeutic window.

    Science.gov (United States)

    Pierce, Robin L

    2015-01-01

    Translational nanomedicine occurs only through the successful integration of multiple inputs and iterative modifications. The therapeutic window plays a pivotal role in the trajectory of translational nanomedicine. Often defined in terms of the range of dosage for safe and effective therapeutic effect, a second definition of the therapeutic window refers to the often narrow temporal window in which a therapeutic effect can be obtained. Expanding the second definition to explicitly include the spatial dimension, this article explores aspects of the therapeutic spaces created by nanomedicine that shift the traditional dimensions of symptom, sign and pathology. This article analyzes three aspects of the therapeutic window in nanomedicine - temporal, spatial and manner of construction and their impact on the dimensions of modern medicine.

  17. Textile Machinery:Imports Rebound Again

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In the year of 2006,the general situation of China’s textile machinery equipment imports had shown a clear sign of revival from the downward trend of two years ago,with a total annual import of 4.1 billion USD,an increase of 19.05% against the same period of 2005. Continuingly,the year of 2007 has witnessed a sustainable growth trend of textile machinery equipment imports in the first quarter and the trend definitely will be maintained through the whole year.According to statistics released from China Customs,the imports of textile machinery reached 1.098 billion USD in the first three months of 2007, up by 35.26% year-on-year. Then,why China’s textile machinery imports warm up again after two years’ cool down?

  18. A comprehensive overview of hybrid construction machinery

    Directory of Open Access Journals (Sweden)

    Jixin Wang

    2016-03-01

    Full Text Available With the increasing attention of energy saving and emission reduction technology, the recent application of hybrid powertrain technology affects the development of construction machinery industry. This article reviews these publications and provides comprehensive references. This article reviews the state-of-art for the hybrid wheel loader and excavator, which focuses on powertrain configuration, energy storage devices, and energy management strategies. The basis of classification and characteristic of each powertrain configuration are described. Advantages and disadvantages of batteries, supercapacitors, hydraulic accumulators, and flywheel used in hybrid construction machinery are summarized. The existing energy management strategies for hybrid construction machinery are also elaborated. The technological challenges and developing trends in the near future for hybrid construction machinery are discussed.

  19. Energy Savings Thanks to French Textile Machinery

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The French Textile Machinery Manufacturers’ Association (UCMTF) has presented,during a seminar it organized for textile professionals and students,the spectacular energy savings achieved thanks to state of the art

  20. Windows 10 Technical Preview

    OpenAIRE

    Jyväsjärvi, Teppo

    2015-01-01

    Tässä opinnäytetyössä tutustaan uuden kesällä 2015 virallisesti julkaistavan Windows 10 -käyttöjärjestelmän Technical Preview -kehitysversioon. Ensimmäinen Technical Preview -versio julkaistiin syksyllä 2014. Opinnäytetyössä tutustaan Windows 10:n uusin ominaisuuksiin ja tehdään vertailua aiemman Windows 8.1 -version kanssa. Työssä Windows 10 Technical Preview asennetaan virtuaalikoneelle, käydään läpi asennuksen eri vaiheet sekä suurimmat muutokset käyttöliittymässä ja sovelluksissa. Op...

  1. Delineating the conformal window

    DEFF Research Database (Denmark)

    Frandsen, Mads Toudal; Pickup, Thomas; Teper, Michael

    2011-01-01

    We identify and characterise the conformal window in gauge theories relevant for beyond the standard model building, e.g. Technicolour, using the criteria of metric confinement and causal analytic couplings, which are known to be consistent with the phase diagram of supersymmetric QCD from Seiberg...... duality. Using these criteria we find perturbation theory to be consistent throughout the predicted conformal window for several of these gauge theories and we discuss recent lattice results in the light of our findings....

  2. Windows Security patch required

    CERN Multimedia

    2003-01-01

    This concerns Windows PCs (XP, 2000, NT) which are NOT centrally managed at CERN for security patches, e.g. home PCs, experiment PCs, portables, ... A security hole which can give full privileges on Windows systems needs to be URGENTLY patched. Details of the security hole and hotfix are at: http://cern.ch/it-div/news/hotfix-MS03-026.asp http://www.microsoft.com/technet/security/bulletin/MS03-026.asp

  3. Windows Security patch required

    CERN Multimedia

    2003-01-01

    This concerns Windows PCs which are NOT centrally managed at CERN for security patches, e.g. home PCs, experiment PCs, portables, ... A security hole which can give full privileges on Windows systems needs to be URGENTLY patched. Details of the security hole and hotfix are at: http://cern.ch/it-div/news/hotfix-MS03-026.asp http://www.microsoft.com/technet/security/bulletin/MS03-026.asp

  4. Windows Security patch required

    CERN Multimedia

    3004-01-01

    This concerns Windows PCs (XP, 2000, NT) which are NOT centrally managed at CERN for security patches, e.g. home PCs, experiment PCs, portables,... A security hole which can give full privileges on Windows systems needs to be URGENTLY patched. Details of the security hole and hotfix are at: http://cern.ch/it-div/news/hotfix-MS03-026.asp http://www.microsoft.com/technet/security/bulletin/MS03-026.asp

  5. Windows Security patch required

    CERN Multimedia

    2003-01-01

    This concerns Windows PCs (XP, 2000, NT) which are NOT centrally managed at CERN for security patches, e.g. home PCs, experiment PCs, portables,... A security hole which can give full privileges on Windows systems needs to be URGENTLY patched. Details of the security hole and hotfix are at: http://cern.ch/it-div/news/hotfix-MS03-026.asp http://www.microsoft.com/technet/security/bulletin/MS03-026.asp

  6. Textile Machinery Import and Export in 2011

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Along with the rebounded international market, in the year of 2011, the foreign trade of textile machinery industry preserved a stable development: the import amount saw a slightly decrease, while the total import and export value kept an increasing trend. According to the Customs, the export and import of textile machinery totalized 2.245 billion USD and 5.364 billion USD, increasing by 27.81% and 24.70%, respectively, comparing with the same period of time in 2010.

  7. Thin Film & Deposition Systems (Windows)

    Data.gov (United States)

    Federal Laboratory Consortium — Coating Lab: Contains chambers for growing thin film window coatings. Plasma Applications Coating Lab: Contains chambers for growing thin film window coatings. Solar...

  8. Thin Film & Deposition Systems (Windows)

    Data.gov (United States)

    Federal Laboratory Consortium — Coating Lab: Contains chambers for growing thin film window coatings. Plasma Applications Coating Lab: Contains chambers for growing thin film window coatings. Solar...

  9. 46 CFR 58.20-15 - Installation of refrigerating machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Installation of refrigerating machinery. 58.20-15... AND AUXILIARY MACHINERY AND RELATED SYSTEMS Refrigeration Machinery § 58.20-15 Installation of refrigerating machinery. (a) Where refrigerating machines are installed in which anhydrous ammonia is used as...

  10. 46 CFR 58.01-35 - Main propulsion auxiliary machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Main propulsion auxiliary machinery. 58.01-35 Section 58... AUXILIARY MACHINERY AND RELATED SYSTEMS General Requirements § 58.01-35 Main propulsion auxiliary machinery. Auxiliary machinery vital to the main propulsion system must be provided in duplicate unless the...

  11. 46 CFR 58.01-25 - Means of stopping machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Means of stopping machinery. 58.01-25 Section 58.01-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS General Requirements § 58.01-25 Means of stopping machinery. Machinery...

  12. Parallel Simulation of 3-D Turbulent Flow Through Hydraulic Machinery

    Institute of Scientific and Technical Information of China (English)

    徐宇; 吴玉林

    2003-01-01

    Parallel calculational methods were used to analyze incompressible turbulent flow through hydraulic machinery. Two parallel methods were used to simulate the complex flow field. The space decomposition method divides the computational domain into several sub-ranges. Parallel discrete event simulation divides the whole task into several parts according to their functions. The simulation results were compared with the serial simulation results and particle image velocimetry (PIV) experimental results. The results give the distribution and configuration of the complex vortices and illustrate the effectiveness of the parallel algorithms for numerical simulation of turbulent flows.

  13. New Window into the Human Body

    Science.gov (United States)

    1985-01-01

    Michael Vannier, MD, a former NASA engineer, recognized the similarity between NASA's computerized image processing technology and nuclear magnetic resonance. With technical assistance from Kennedy Space Center, he developed a computer program for Mallinckrodt Institute of Radiology enabling Nuclear Magnetic Resonance (NMR) to scan body tissue for earlier diagnoses. Dr. Vannier feels that "satellite imaging" has opened a new window into the human body.

  14. ADJUSTMENT, MAINTENANCE, AND REPAIR OF CROP HARVESTING MACHINERY. AGRICULTURAL MACHINERY--SERVICE OCCUPATIONS, MODULE NUMBER 11.

    Science.gov (United States)

    Ohio State Univ., Columbus. Center for Vocational and Technical Education.

    ONE OF A SERIES DESIGNED FOR HELPING TEACHERS PREPARE POSTSECONDARY-LEVEL STUDENTS FOR AGRICULTURAL MACHINERY SERVICE OCCUPATIONS AS PARTS MEN, MECHANICS, MECHANIC'S HELPERS, AND SERVICE SUPERVISORS, THIS GUIDE AIMS TO DEVELOP STUDENT COMPETENCY IN ADJUSTING, REPAIRING, AND MAINTAINING CROP HARVESTING MACHINERY. SUGGESTIONS FOR INTRODUCTION OF THE…

  15. Adaptive Liquid Crystal Windows

    Energy Technology Data Exchange (ETDEWEB)

    Taheri, Bahman; Bodnar, Volodymyr

    2011-12-31

    Energy consumption by private and commercial sectors in the U.S. has steadily grown over the last decade. The uncertainty in future availability of imported oil, on which the energy consumption relies strongly, resulted in a dramatic increase in the cost of energy. About 20% of this consumption are used to heat and cool houses and commercial buildings. To reduce dependence on the foreign oil and cut down emission of greenhouse gases, it is necessary to eliminate losses and reduce total energy consumption by buildings. To achieve this goal it is necessary to redefine the role of the conventional windows. At a minimum, windows should stop being a source for energy loss. Ideally, windows should become a source of energy, providing net gain to reduce energy used to heat and cool homes. It is possible to have a net energy gain from a window if its light transmission can be dynamically altered, ideally electronically without the need of operator assistance, providing optimal control of the solar gain that varies with season and climate in the U.S. In addition, the window must not require power from the building for operation. Resolution of this problem is a societal challenge and of national interest and will have a broad global impact. For this purpose, the year-round, allclimate window solution to provide an electronically variable solar heat gain coefficient (SHGC) with a wide dynamic range is needed. AlphaMicron, Inc. (AMI) developed and manufactured 1ft × 1ft prototype panels for the world’s first auto-adjusting Adaptive Liquid Crystal Windows (ALCWs) that can operate from sunlight without the need for external power source and demonstrate an electronically adjustable SHGC. This novel windows are based on AlphaMicron’s patented e-Tint® technology, a guesthost liquid crystal system implemented on flexible, optically clear plastic films. This technology is suitable both for OEM and aftermarket (retro-fitting) lamination to new and existing windows. Low level of

  16. Windows 8.1 bible

    CERN Document Server

    Boyce, Jim; Tidrow, Rob

    2014-01-01

    Windows 8.1 coverage that goes above and beyond all competitors? Serving as an evolutionary update to Windows 8, Windows 8.1 provides critical changes to parts of Windows 8, such as greater customization of the interface and boot operations, return of a 'start button' that reveals apps, greater integration between the two interfaces, and updates to apps. Weighing in at nearly 1000 pages, Windows 8.1 Bible provides deeper Windows insight than any other book on the market. It's valuable for both professionals needing a guide to the nooks and crannies of Windows and regular users wanting a wide

  17. Handbook on Windows and Energy

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Schultz, Jørgen Munthe; Svendsen, Sv Aa Højgaard

    The handbook on windows and energy is a general description of windows with the main focus put on the energy performance. Common window products are described by commonly used nomenclature, description of frame and sash conctructions and description of commonly used glazing types.The energy...... transmission through windows is described in detail including radiation, convection and conduction as well as solar transmittance of window glazing. The most used terms related to characterization of window energy performance are defined and calculation methods according to international standards...... are described.A method for estimation of the net energy flow on a yearly basis and/or during the heating season is presented. The method is able to combine the influence of window orientation, window size and window shape, type of glazing, frame area relative to total window area and type of spacer in sealed...

  18. Microsoft Windows networking essentials

    CERN Document Server

    Gibson, Darril

    2011-01-01

    The core concepts and technologies of Windows networking Networking can be a complex topic, especially for those new to the field of IT. This focused, full-color book takes a unique approach to teaching Windows networking to beginners by stripping down a network to its bare basics, thereby making each topic clear and easy to understand. Focusing on the new Microsoft Technology Associate (MTA) program, this book pares down to just the essentials, showing beginners how to gain a solid foundation for understanding networking concepts upon which more advanced topics and technologies can be built.

  19. Windows Azure Platform

    CERN Document Server

    Redkar, Tejaswi

    2010-01-01

    The Azure Services Platform is a brand-new cloud-computing technology from Microsoft. It is composed of four core components-Windows Azure, .NET Services, SQL Services, and Live Services-each with a unique role in the functioning of your cloud service. It is the goal of this book to show you how to use these components, both separately and together, to build flawless cloud services. At its heart Windows Azure Platform is a down-to-earth, code-centric book. This book aims to show you precisely how the components are employed and to demonstrate the techniques and best practices you need to know

  20. Windows Azure mobile services

    CERN Document Server

    Johnson, Bruce

    2013-01-01

    Get up and running with Windows Azure Mobile Services Windows Azure Mobile Services (WAMS) is a turn-key backend solution for applications, mobile or otherwise, to utilize structured storage in the cloud. It includes basic data access functionality and built-in authentication with Microsoft Account, Facebook, Twitter and Google, as well as push notification to the client app. This compact, to the point book gives you just what you need to get up and running with these tools. Demonstrates how to add, update, delete and retrieve data using standard .NET classes or REST-based requestsDescribes h

  1. Microsoft Windows Security Essentials

    CERN Document Server

    Gibson, Darril

    2011-01-01

    Windows security concepts and technologies for IT beginners IT security can be a complex topic, especially for those new to the field of IT. This full-color book, with a focus on the Microsoft Technology Associate (MTA) program, offers a clear and easy-to-understand approach to Windows security risks and attacks for newcomers to the world of IT. By paring down to just the essentials, beginners gain a solid foundation of security concepts upon which more advanced topics and technologies can be built. This straightforward guide begins each chapter by laying out a list of topics to be discussed,

  2. BERKELEY LAB WINDOW

    Energy Technology Data Exchange (ETDEWEB)

    2015-03-06

    WINDOW features include: - Microsoft Windows TM interface - algorithms for the calculation of total fenestration product U-values and Solar Heat Gain Coefficient consistent with ASHRAE SPC 142, ISO 15099, and the National Fenestration Rating Council - a Condensation Resistance Index in accordance with the NFRC 500 Standard - and integrated database of properties - imports data from other LBNL window analysis software: - Import THERM file into the Frame Library - Import records from IGDB and OPtics5 into the Glass Library for the optical properties of coated and uncoated glazings, laminates, and applied films. Program Capabilities WINDOW 7.2 offers the following features: The ability to analyze products made from any combination of glazing layers, gas layers, frames, spacers, and dividers under any environmental conditions and at any tilt; The ability to model complex glazing systems such as venetian blinds and roller shades. Directly accessible libraries of window system components, (glazing systems, glazing layers, gas fills, frame and divider elements), and environmental conditions; The choice of working in English (IP), or Systeme International (SI) units; The ability to specify the dimensions and thermal properties of each frame element (header, sills, jamb, mullion) in a window; A multi-band (wavelength-by-wavelength) spectral model; A Glass Library which can access spectral data files for many common glazing materials from the Optics5database; A night-sky radiative model; A link with the DOE-2.1E and Energy Plus building energy analysis program. Performance Indices and Other Results For a user-defined fenestration system and user-defined environmental conditions, WINDOW calculates: The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the complete window system; The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the glazing system (center-of-glass values); The U-values of the

  3. Mitochondrial Machineries for Protein Import and Assembly.

    Science.gov (United States)

    Wiedemann, Nils; Pfanner, Nikolaus

    2017-03-15

    Mitochondria are essential organelles with numerous functions in cellular metabolism and homeostasis. Most of the >1,000 different mitochondrial proteins are synthesized as precursors in the cytosol and are imported into mitochondria by five transport pathways. The protein import machineries of the mitochondrial membranes and aqueous compartments reveal a remarkable variability of mechanisms for protein recognition, translocation, and sorting. The protein translocases do not operate as separate entities but are connected to each other and to machineries with functions in energetics, membrane organization, and quality control. Here, we discuss the versatility and dynamic organization of the mitochondrial protein import machineries. Elucidating the molecular mechanisms of mitochondrial protein translocation is crucial for understanding the integration of protein translocases into a large network that controls organelle biogenesis, function, and dynamics. Expected final online publication date for the Annual Review of Biochemistry Volume 86 is June 20, 2017. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

  4. The RNA polymerase I transcription machinery.

    Science.gov (United States)

    Russell, Jackie; Zomerdijk, Joost C B M

    2006-01-01

    The rRNAs constitute the catalytic and structural components of the ribosome, the protein synthesis machinery of cells. The level of rRNA synthesis, mediated by Pol I (RNA polymerase I), therefore has a major impact on the life and destiny of a cell. In order to elucidate how cells achieve the stringent control of Pol I transcription, matching the supply of rRNA to demand under different cellular growth conditions, it is essential to understand the components and mechanics of the Pol I transcription machinery. In this review, we discuss: (i) the molecular composition and functions of the Pol I enzyme complex and the two main Pol I transcription factors, SL1 (selectivity factor 1) and UBF (upstream binding factor); (ii) the interplay between these factors during pre-initiation complex formation at the rDNA promoter in mammalian cells; and (iii) the cellular control of the Pol I transcription machinery.

  5. Simple cryogenic infrared window

    NARCIS (Netherlands)

    Hartemink, M.; Hartemink, M.; Godfried, H.P; Godfried, Herman

    1991-01-01

    A simple, cheap technique is reported that allows materials with both large and small thermal expansion coefficients to be mounted as windows in low temperature cryostats while at the same time avoiding thermal stresses. The construction may be thermally cycled many times with no change in its

  6. Transparent aerogel Windows

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe

    In a recent EU FP5 project, monolithic silica aerogel was further developed with respect to the production process at pilot-scale, its properties and the application as transparent insulation material in highly insulating and transparent windows. The aerogel production process has been optimised...

  7. "Stained Glass" Landscape Windows

    Science.gov (United States)

    Vannata, Janine

    2008-01-01

    Both adults and children alike marvel at the grand vivid stained-glass windows created by American artist Louis Comfort Tiffany. Today he is commonly recognized as one of America's most influential designers and artists throughout the last nineteenth and early twentieth century. In the lesson described in this article, students created their own…

  8. Machinery condition monitoring principles and practices

    CERN Document Server

    Mohanty, Amiya Ranjan

    2015-01-01

    Find the Fault in the MachinesDrawing on the author's more than two decades of experience with machinery condition monitoring and consulting for industries in India and abroad, Machinery Condition Monitoring: Principles and Practices introduces the practicing engineer to the techniques used to effectively detect and diagnose faults in machines. Providing the working principle behind the instruments, the important elements of machines as well as the technique to understand their conditions, this text presents every available method of machine fault detection occurring in machines in general, an

  9. Impact of coated windows on visual perception

    DEFF Research Database (Denmark)

    Johnsen, Kjeld; Dubois, Marie-Claude

    There is at present an architectural trend promoting the use of large glass facades in commercial and office buildings. These facades generate a large cooling and heating demand creating the need for combined solar-protective and low-emissitivity coated windows. This report describes the results...... of brightness and colours in a space. Overall, the study shows that coated glazings may moderately affect the perception details, slightly affect the perception of glare from window and do not affect the perception of shadows on and around objects in the room. The results also suggest that the perception...

  10. Italian Textile Machinery Industry Focuses on Sustainability

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    As for fashion industry,Italian brands always play as one of the leaders influencing the global trends.This time,in Shanghai,the Italian textile machinery manufacturers highlight the latest proposals on sustainability and eco-friendly technology.

  11. Italian Textite Machinery Industry Focuses on Sustainability

    Institute of Scientific and Technical Information of China (English)

    Wang Ting

    2010-01-01

    @@ At the ITMA Asia+CITME 2010,which was held on June 22at the Shanghai New International Expo Centre in Shanghai,Italian textile machinery manufacturers represented one of the largest foreign delegations: 115exhibitors occupying a total surface area of about 4,000 sq.meters.

  12. Active Vibration Dampers For Rotating Machinery

    Science.gov (United States)

    Kascack, Albert F.; Ropchock, John J.; Lakatos, Tomas F.; Montague, Gerald T.; Palazzolo, Alan; Lin, Reng Rong

    1994-01-01

    Active dampers developed to suppress vibrations in rotating machinery. Essentially feedback control systems and reciprocating piezoelectric actuators. Similar active damper containing different actuators described in LEW-14488. Concept also applicable to suppression of vibrations in stationary structures subject to winds and earthquakes. Active damper offers adjustable suppression of vibrations. Small and lightweight and responds faster to transients.

  13. CCPIT Machinery Exhibition Succeeded in Kuala Lumpur

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

      From August 18 to 20, 2005, China Council for the Promotion of International Trade(CCPIT) held China Machinery and Electronics Trade Exhibition, CME 2005 in Kuala Lumpur, the capital of Malaysia on behalf of China, a good job has been done.……

  14. CCPIT Machinery Exhibition Succeeded in Kuala Lumpur

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ From August 18 to 20, 2005, China Council for the Promotion of International Trade(CCPIT) held China Machinery and Electronics Trade Exhibition, CME 2005 in Kuala Lumpur, the capital of Malaysia on behalf of China, a good job has been done.

  15. Brownian machinery in physics and biology

    OpenAIRE

    Hänggi, Peter

    2001-01-01

    Brownian machinery in physics and biology. - In: Noise in physical systems and 1/f fluctuations : proceedings of the 16th internat. conference, Gainesville, Fl., 22-25 Oct. 2001 / Ed.: Gijs Bosman. - New Jersey u.a. : World Scientific, 2001. - S. 397-399

  16. Computational design of hydrogen fluid machinery

    Energy Technology Data Exchange (ETDEWEB)

    Kaupert, K.A. [Ebara Cryodynamics Div., Sparks, NV (United States)

    2001-06-01

    This paper presented computational design methods for liquid hydrogen fluid machinery for which the aerospace industry holds a particular interest. The main design points are reliability, efficiency and predictability. The methods described here were based on experience gained in the liquefied natural gas sector. The main design validation tools presented in this paper were computational fluid dynamics, computational rotordynamics, and computational stress analysis. Recent advances have made it possible to incorporate the influence of unsteady phenomena. These new design techniques make it possible to increase the reliability, efficiency and predictability of fluid machinery. A design example for an Ebara Cryodynamics multi-stage impeller/diffuser-return vane combination operating in liquefied natural gas was presented. The fluid machinery characteristics were compared for liquid hydrogen and liquefied natural gas to demonstrate the technical feasibility of industrial liquid hydrogen fluid machinery. Currently, no significant demand exists for liquid hydrogen turbomachinery except for the rocket engine industry. But the emergence of the hydrogen economy will promote the growth in liquefied natural gas and or liquid hydrogen cryogenic turbomachinery. 11 refs., 3 tabs., 6 figs.

  17. Windows CE自定制Shell%Customizing Windows CE Shell

    Institute of Scientific and Technical Information of China (English)

    覃朗; 雷跃明

    2010-01-01

    Shell是用户访问操作系统的接口.Shell开发在Windows CE操作系统开发中占据一定的重要性.对Windows CE Shell进行了概述,并通过建立Shell模型,讲述如何自定制Windows CE Shell和定制Shell必须注意的问题,对Windows CE Shell的定制进行深入研究.

  18. Recent evolutions of refrigerating machineries and heat pumps; Evolutions recentes des machines a froid et thermopompes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This book of proceedings reports on 10 papers (or series of transparencies) concerning some recent developments about refrigerating machineries and heat pumps as used in space heating, air-conditioning and industrial refrigeration. Various aspects are developed: thermodynamic cycles, thermal performances, dimensioning, modeling, refrigerants substitution, design of flanged exchangers, compressors etc.. (J.S.)

  19. Occupants' window opening behaviour

    DEFF Research Database (Denmark)

    Fabi, Valentina; Andersen, Rune Korsholm; Corgnati, Stefano

    2012-01-01

    Energy consumption in buildings is influenced by several factors related to the building properties and the building controls, some of them highly connected to the behaviour of their occupants.In this paper, a definition of items referring to occupant behaviour related to the building control...... systems is proposed, based on studies presented in literature and a general process leading to the effects on energy consumptions is identified.Existing studies on the topic of window opening behaviour are highlighted and a theoretical framework to deal with occupants' interactions with building controls......, aimed at improving or maintaining the preferred indoor environmental conditions, is elaborated. This approach is used to look into the drivers for the actions taken by the occupants (windows opening and closing) and to investigate the existing models in literature of these actions for both residential...

  20. Duplication of Windows Services

    OpenAIRE

    Shan, Zhiyong; Chiueh, Tzi-cker; Wang, Xin

    2016-01-01

    OS-level virtualization techniques virtualize system resources at the system call interface, has the distinct advantage of smaller run-time resource requirements as compared to HAL-level virtualization techniques, and thus forms an important building block for virtualizing parallel and distributed applications such as a HPC clusters. Because the Windows operating system puts certain critical functionalities in privileged user-level system service processes, a complete OS-level virtualization ...

  1. Target Window Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Woloshun, Keith Albert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-02-11

    The target window design implemented and tested in experiments at ANL have performed without failure for the available beam of 6 mm FWHM on a 12 mm diameter target. However, scaling that design to a 25 mm diameter target size for a 12 mm FWHM beam has proven problematic. Combined thermal and mechanical (pressure induced) stresses and strains are too high to maintain the small coolant gaps and provide adequate fatigue lifetime.

  2. Windows with improved energy performances

    DEFF Research Database (Denmark)

    Laustsen, Jacob Birck; Svendsen, Svend

    2003-01-01

    Heat loss through windows represents a considerable part of the total heat loss from houses. However, apart from providing daylight access and view, windows offer a unique potential for solar gain to be exploited during the heating season. Until now valuation of the energy performance of windows...... has primary focused on the heat loss coefficient, U-value. However, as the U-value, especially for the glazing part, has improved considerably during the last years, the total solar energy transmittance, g-value, has become equally important to the total energy performance of windows. Improved energy...... performance of windows can be reached by development of each element of the window, but to gain a considerable improvement in the overall energy performance all elements of the windows need to be examined together and the construction optimised. This paper describes potential improvements of window elements...

  3. Mobilní platforma Windows

    OpenAIRE

    Ženíšek, Jan

    2011-01-01

    This bachelor thesis describes to mobile operating system Windows Phone 8. That was introduced in half of the year 2012. The main aim this thesis is to introduce operating system Windows Phone 8. It includes all its parameters, features and technologies, which are necessary for future application development. Partial goal is to explain the possibilities and processes of the development not only for Windows Phone 8 but also for Windows 8. Another crucial goal is the illustrative example of usi...

  4. Viral interactions with components of the splicing machinery.

    Science.gov (United States)

    Meyer, F

    2016-01-01

    Eukaryotic genes are often interrupted by stretches of sequence with no protein coding potential or obvious function. After transcription, these interrupting sequences must be removed to give rise to the mature messenger RNA. This fundamental process is called RNA splicing and is achieved by complicated machinery made of protein and RNA that assembles around the RNA to be edited. Viruses also use RNA splicing to maximize their coding potential and economize on genetic space, and use clever strategies to manipulate the splicing machinery to their advantage. This article gives an overview of the splicing process and provides examples of viral strategies that make use of various components of the splicing system to promote their replicative cycle. Representative virus families have been selected to illustrate the interaction with various regulatory proteins and ribonucleoproteins. The unifying theme is fine regulation through protein-protein and protein-RNA interactions with the spliceosome components and associated factors to promote or prevent spliceosome assembly on given splice sites, in addition to a strong influence from cis-regulatory sequences on viral transcripts. Because there is an intimate coupling of splicing with the processes that direct mRNA biogenesis, a description of how these viruses couple the regulation of splicing with the retention or stability of mRNAs is also included. It seems that a unique balance of suppression and activation of splicing and nuclear export works optimally for each family of viruses.

  5. Teach yourself visually Windows 10

    CERN Document Server

    McFedries, Paul

    2015-01-01

    Learn Windows 10 visually with step-by-step instructions Teach Yourself VISUALLY Windows 10 is the visual learner's guide to the latest Windows upgrade. Completely updated to cover all the latest features, this book walks you step-by-step through over 150 essential Windows tasks. Using full color screen shots and clear instruction, you'll learn your way around the interface, set up user accounts, play media files, download photos from your camera, go online, set up email, and much more. You'll even learn how to customize Windows 10 to suit the way you work best, troubleshoot and repair common

  6. Beginner's guide to Windows 7

    CERN Document Server

    Holden, Susan

    2011-01-01

    This concise, accessible and down-to-earth guide will help you get the most out of your computer using Windows 7, whether you're a complete beginner or upgrading from previous Microsoft operating systems. You'll learn about exciting new features of Windows 7, including how to work with Windows 7 Libraries, how to communicate using Windows Live Mail, how to use Windows Live Photo Gallery, how to browse and search the web using Internet Explorer, and Version 8 and Accelerators.

  7. Windows Home Server users guide

    CERN Document Server

    Edney, Andrew

    2008-01-01

    Windows Home Server brings the idea of centralized storage, backup and computer management out of the enterprise and into the home. Windows Home Server is built for people with multiple computers at home and helps to synchronize them, keep them updated, stream media between them, and back them up centrally. Built on a similar foundation as the Microsoft server operating products, it's essentially Small Business Server for the home.This book details how to install, configure, and use Windows Home Server and explains how to connect to and manage different clients such as Windows XP, Windows Vist

  8. Windows 8.1 simplified

    CERN Document Server

    McFedries, Paul

    2013-01-01

    The easiest way for visual learners to get started with Windows 8 The popular Simplified series makes visual learning easier than ever, and with more than 400,000 copies sold, previous Windows editions are among the bestselling Visual books. Using a Visual approach, this book covers the new features of Windows 8.1 and provides step-by-step instructions for readers who are entirely new to the subject. Inside, you'll discover tasks on topics such as: Windows basics, creating movies, sharing their computer, working with and managing files, browsing the web, and new ways to customize Windows to w

  9. Present Situation of Petroleum Machinery Manufacturers in China

    Institute of Scientific and Technical Information of China (English)

    Li Xilu

    2008-01-01

    Since China joined the WTO, the environment for the development of petroleum machinery industry in the country has changed a lot. As international petroleum machinery manufacturers enter into Chinese market, petroleum machinery manufacturers of the country are facing fierce competition both at home and abroad.

  10. 30 CFR 56.14205 - Machinery, equipment, and tools.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Machinery, equipment, and tools. 56.14205... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Machinery and Equipment Safety Practices and Operational Procedures § 56.14205 Machinery, equipment, and tools....

  11. 46 CFR 58.01-20 - Machinery guards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Machinery guards. 58.01-20 Section 58.01-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS General Requirements § 58.01-20 Machinery guards. Gears, couplings, flywheels...

  12. 46 CFR 109.205 - Inspection of boilers and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Inspection of boilers and machinery. 109.205 Section 109... OPERATIONS Tests, Drills, and Inspections § 109.205 Inspection of boilers and machinery. The chief engineer or engineer in charge, before he assumes charge of the boilers and machinery of a unit shall...

  13. 29 CFR 1915.165 - Ship's deck machinery.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Ship's deck machinery. 1915.165 Section 1915.165 Labor... (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Ship's Machinery and Piping Systems § 1915.165 Ship's deck machinery. (a) Before work is performed on the anchor windlass or any...

  14. 46 CFR 122.208 - Accidents to machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Accidents to machinery. 122.208 Section 122.208 Shipping... Voyage Records § 122.208 Accidents to machinery. The owner, managing operator, or master shall report damage to a boiler, unfired pressure vessel, or machinery that renders further use of the item...

  15. 29 CFR 1915.164 - Ship's propulsion machinery.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Ship's propulsion machinery. 1915.164 Section 1915.164 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Machinery and Piping Systems § 1915.164 Ship's propulsion machinery. (a) Before work is performed on...

  16. 46 CFR 109.419 - Report of unsafe machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Report of unsafe machinery. 109.419 Section 109.419... OPERATIONS Reports, Notifications, and Records Reports and Notifications § 109.419 Report of unsafe machinery. If a boiler, unfired pressure vessel, or other machinery on a unit is unsafe to operate, the...

  17. 30 CFR 57.14205 - Machinery, equipment, and tools.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Machinery, equipment, and tools. 57.14205... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Machinery and Equipment Safety Practices and Operational Procedures § 57.14205 Machinery, equipment, and...

  18. 46 CFR 252.33 - Hull and machinery insurance.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Hull and machinery insurance. 252.33 Section 252.33... Subsidy Rates § 252.33 Hull and machinery insurance. (a) Subsidy items. The fair and reasonable net premium costs (including stamp taxes) of hull and machinery, increased value, excess general...

  19. 29 CFR 1910.214 - Cooperage machinery. [Reserved

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Cooperage machinery. 1910.214 Section 1910.214 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Machinery and Machine Guarding § 1910.214 Cooperage machinery....

  20. 46 CFR 196.30-5 - Accidents to machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Accidents to machinery. 196.30-5 Section 196.30-5... Reports of Accidents, Repairs, and Unsafe Equipment § 196.30-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use...

  1. 46 CFR 97.30-5 - Accidents to machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Accidents to machinery. 97.30-5 Section 97.30-5 Shipping... Reports of Accidents, Repairs, and Unsafe Equipment § 97.30-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use...

  2. 46 CFR 185.208 - Accidents to machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Accidents to machinery. 185.208 Section 185.208 Shipping...) OPERATIONS Marine Casualties and Voyage Records § 185.208 Accidents to machinery. The owner, managing operator, or master shall report damage to a boiler, unfired pressure vessel, or machinery that...

  3. 46 CFR 78.33-5 - Accidents to machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Accidents to machinery. 78.33-5 Section 78.33-5 Shipping... Accidents, Repairs, and Unsafe Equipment § 78.33-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use of the...

  4. Nucleolus-like compartmentalization of the transcription machinery in fast-growing bacterial cells.

    Science.gov (United States)

    Jin, Ding Jun; Mata Martin, Carmen; Sun, Zhe; Cagliero, Cedric; Zhou, Yan Ning

    2017-02-01

    We have learned a great deal about RNA polymerase (RNA Pol), transcription factors, and the transcriptional regulation mechanisms in prokaryotes for specific genes, operons, or transcriptomes. However, we have only begun to understand how the transcription machinery is three-dimensionally (3D) organized into bacterial chromosome territories to orchestrate the transcription process and to maintain harmony with the replication machinery in the cell. Much progress has been made recently in our understanding of the spatial organization of the transcription machinery in fast-growing Escherichia coli cells using state-of-the-art superresolution imaging techniques. Co-imaging of RNA polymerase (RNA Pol) with DNA and transcription elongation factors involved in ribosomal RNA (rRNA) synthesis, and ribosome biogenesis has revealed similarities between bacteria and eukaryotes in the spatial organization of the transcription machinery for growth genes, most of which are rRNA genes. Evidence supports the notion that RNA Pol molecules are concentrated, forming foci at the clustering of rRNA operons resembling the eukaryotic nucleolus. RNA Pol foci are proposed to be active transcription factories for both rRNA genes expression and ribosome biogenesis to support maximal growth in optimal growing conditions. Thus, in fast-growing bacterial cells, RNA Pol foci mimic eukaryotic Pol I activity, and transcription factories resemble nucleolus-like compartmentation. In addition, the transcription and replication machineries are mostly segregated in space to avoid the conflict between the two major cellular functions in fast-growing cells.

  5. OPTIMAL MAINTENANCE AND REPLACEMENT OF EXTRACTION MACHINERY

    Institute of Scientific and Technical Information of China (English)

    Suresh P.SETHI; Hong-Mo YEH; Rong ZHANG; Andrew K.S.JARDINE

    2008-01-01

    This paper considers a problem of optimal preventive maintenance and replacement schedule ofequipment devoted to extracting resources from known deposits. Typical examples are oil drills, mine shovels, etc. At most one replacement of the existing machinery by a new one is allowed. The problem is formulated as an optimal control problem subject to the state constraint that the remaining deposit at any given time is nonnegative. We show that the optimal preventive maintenance, production rates, and the replacement and salvage times of the existing machinery and the new one, if required, can be obtained by solving sequentially a series of free-end-point optimal control problems. Moreover, an algorithm based on this result is developed and used to solve two illustrative examples.

  6. The Autophagic Machinery in Enterovirus Infection

    Directory of Open Access Journals (Sweden)

    Jeffrey K. F. Lai

    2016-01-01

    Full Text Available The Enterovirus genus of the Picornaviridae family comprises many important human pathogens, including polioviruses, rhinovirus, enterovirus A71, and enterovirus D68. They cause a wide variety of diseases, ranging from mild to severe life-threatening diseases. Currently, no effective vaccine is available against enteroviruses except for poliovirus. Enteroviruses subvert the autophagic machinery to benefit their assembly, maturation, and exit from host. Some enteroviruses spread between cells via a process described as autophagosome-mediated exit without lysis (AWOL. The early and late phases of autophagy are regulated through various lipids and their metabolizing enzymes. Some of these lipids and enzymes are specifically regulated by enteroviruses. In the present review, we summarize the current understanding of the regulation of autophagic machinery by enteroviruses, and provide updates on recent developments in this field.

  7. Sunlight Responsive Thermochromic Window System

    Energy Technology Data Exchange (ETDEWEB)

    Millett, F,A; Byker,H, J

    2006-10-27

    Pleotint has embarked on a novel approach with our Sunlight Responsive Thermochromic, SRT™, windows. We are integrating dynamic sunlight control, high insulation values and low solar heat gain together in a high performance window. The Pleotint SRT window is dynamic because it reversibly changes light transmission based on thermochromics activated directly by the heating effect of sunlight. We can achieve a window package with low solar heat gain coefficient (SHGC), a low U value and high insulation. At the same time our windows provide good daylighting. Our innovative window design offers architects and building designers the opportunity to choose their desired energy performance, excellent sound reduction, external pane can be self-cleaning, or a resistance to wind load, blasts, bullets or hurricanes. SRT windows would provide energy savings that are estimated at up to 30% over traditional window systems. Glass fabricators will be able to use existing equipment to make the SRT window while adding value and flexibility to the basic design. Glazing installers will have the ability to fit the windows with traditional methods without wires, power supplies and controllers. SRT windows can be retrofit into existing buildings,

  8. Fault Diagnosis for Rotating Machinery: A Method based on Image Processing.

    Science.gov (United States)

    Lu, Chen; Wang, Yang; Ragulskis, Minvydas; Cheng, Yujie

    2016-01-01

    Rotating machinery is one of the most typical types of mechanical equipment and plays a significant role in industrial applications. Condition monitoring and fault diagnosis of rotating machinery has gained wide attention for its significance in preventing catastrophic accident and guaranteeing sufficient maintenance. With the development of science and technology, fault diagnosis methods based on multi-disciplines are becoming the focus in the field of fault diagnosis of rotating machinery. This paper presents a multi-discipline method based on image-processing for fault diagnosis of rotating machinery. Different from traditional analysis method in one-dimensional space, this study employs computing method in the field of image processing to realize automatic feature extraction and fault diagnosis in a two-dimensional space. The proposed method mainly includes the following steps. First, the vibration signal is transformed into a bi-spectrum contour map utilizing bi-spectrum technology, which provides a basis for the following image-based feature extraction. Then, an emerging approach in the field of image processing for feature extraction, speeded-up robust features, is employed to automatically exact fault features from the transformed bi-spectrum contour map and finally form a high-dimensional feature vector. To reduce the dimensionality of the feature vector, thus highlighting main fault features and reducing subsequent computing resources, t-Distributed Stochastic Neighbor Embedding is adopt to reduce the dimensionality of the feature vector. At last, probabilistic neural network is introduced for fault identification. Two typical rotating machinery, axial piston hydraulic pump and self-priming centrifugal pumps, are selected to demonstrate the effectiveness of the proposed method. Results show that the proposed method based on image-processing achieves a high accuracy, thus providing a highly effective means to fault diagnosis for rotating machinery.

  9. Fault Diagnosis for Rotating Machinery: A Method based on Image Processing

    Science.gov (United States)

    Lu, Chen; Wang, Yang; Ragulskis, Minvydas; Cheng, Yujie

    2016-01-01

    Rotating machinery is one of the most typical types of mechanical equipment and plays a significant role in industrial applications. Condition monitoring and fault diagnosis of rotating machinery has gained wide attention for its significance in preventing catastrophic accident and guaranteeing sufficient maintenance. With the development of science and technology, fault diagnosis methods based on multi-disciplines are becoming the focus in the field of fault diagnosis of rotating machinery. This paper presents a multi-discipline method based on image-processing for fault diagnosis of rotating machinery. Different from traditional analysis method in one-dimensional space, this study employs computing method in the field of image processing to realize automatic feature extraction and fault diagnosis in a two-dimensional space. The proposed method mainly includes the following steps. First, the vibration signal is transformed into a bi-spectrum contour map utilizing bi-spectrum technology, which provides a basis for the following image-based feature extraction. Then, an emerging approach in the field of image processing for feature extraction, speeded-up robust features, is employed to automatically exact fault features from the transformed bi-spectrum contour map and finally form a high-dimensional feature vector. To reduce the dimensionality of the feature vector, thus highlighting main fault features and reducing subsequent computing resources, t-Distributed Stochastic Neighbor Embedding is adopt to reduce the dimensionality of the feature vector. At last, probabilistic neural network is introduced for fault identification. Two typical rotating machinery, axial piston hydraulic pump and self-priming centrifugal pumps, are selected to demonstrate the effectiveness of the proposed method. Results show that the proposed method based on image-processing achieves a high accuracy, thus providing a highly effective means to fault diagnosis for rotating machinery. PMID

  10. Windows Azure web sites

    CERN Document Server

    Chambers, James

    2013-01-01

    A no-nonsense guide to maintaining websites in Windows Azure If you're looking for a straightforward, practical guide to get Azure websites up and running, then this is the book for you. This to-the-point guide provides you with the tools you need to move and maintain a website in the cloud. You'll discover the features that most affect developers and learn how they can be leveraged to work to your advantage. Accompanying projects enhance your learning experience and help you to walk away with a thorough understanding of Azure's supported technologies, site deployment, and manageme

  11. Transparent aerogel Windows

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe

    In a recent EU FP5 project, monolithic silica aerogel was further developed with respect to the production process at pilot-scale, its properties and the application as transparent insulation material in highly insulating and transparent windows. The aerogel production process has been optimised...... the supercritical washing step included in the drying phase. At the same time the production plant have been modified to recycle most of the chemicals involved in the production process. A large number of aerogel glazing prototypes have been made with partly evacuated aerogel in between two layers of low iron...

  12. Windows Azure Platform

    CERN Document Server

    Redkar, Tejaswi

    2011-01-01

    The Windows Azure Platform has rapidly established itself as one of the most sophisticated cloud computing platforms available. With Microsoft working to continually update their product and keep it at the cutting edge, the future looks bright - if you have the skills to harness it. In particular, new features such as remote desktop access, dynamic content caching and secure content delivery using SSL make the latest version of Azure a more powerful solution than ever before. It's widely agreed that cloud computing has produced a paradigm shift in traditional architectural concepts by providin

  13. Laplacian magic windows

    Science.gov (United States)

    Berry, M. V.

    2017-06-01

    A transparent sheet, flat to unaided vision but with a gentle surface relief, can concentrate light onto a screen with intensity reproducing any desired image: the sheet is a ‘magic window’. When the ray deflections are sufficiently small that there are no caustics between the window and the screen, the image intensity is the Laplacian function of the relief height function—a very simple approximation to general freeform optics. Therefore the desired relief is obtained by solving Poisson’s equation. Numerical simulations indicate that the Laplacian image approximation will apply to realistic situations.

  14. SAF for Windows

    DEFF Research Database (Denmark)

    Hansen, Timme

    2001-01-01

    SAF for Windows er et computerprogram til parametrisk konstruktion af translationsskaller. Skaloverfladernes tredimensionelle, facetterede form fremkommer ved en kombination af to todimensionelle formbestemmende kurver, som kan vælges og redigeres af brugeren. Programmet kan udfolde de genererede...... skaller, så facetternes sande størrelse vises, og danne en liste med alle mål. Både skallernes tredimensionelle og todimensionelle form kan eksporteres som DXF-filer til CAD programmer. Programmet indeholder stadig fejl - jeg arbejder på en ny version....

  15. Radiation controlling reversible window

    Energy Technology Data Exchange (ETDEWEB)

    Gell, H.A. Jr.

    1980-01-01

    A coated glass glazing system is presented including a transparent glass substrate having one surface coated with a radiation absorptive film which is overcoated with a radiation reflective film by a technique which renders the radiation reflective film radiation absorptive at the surface contracting the radiating absorptive film. The coated glass system is used as glazing for storm windows which are adapted to be reversible so that the radiation reflective surface may be exposed to the outside of the dwelling during the warm seasons to prevent excessive solar radiation from entering a dwelling and reversed during cold seasons to absorb solar radiation and utilize it to aid in keeping the dwelling interior warm.

  16. Invariant sets for Windows

    CERN Document Server

    Morozov, Albert D; Dragunov, Timothy N; Malysheva, Olga V

    1999-01-01

    This book deals with the visualization and exploration of invariant sets (fractals, strange attractors, resonance structures, patterns etc.) for various kinds of nonlinear dynamical systems. The authors have created a special Windows 95 application called WInSet, which allows one to visualize the invariant sets. A WInSet installation disk is enclosed with the book.The book consists of two parts. Part I contains a description of WInSet and a list of the built-in invariant sets which can be plotted using the program. This part is intended for a wide audience with interests ranging from dynamical

  17. Machinery prognostics and prognosis oriented maintenance management

    CERN Document Server

    Yan, Jihong

    2014-01-01

    This book gives a complete presentatin of the basic essentials of machinery prognostics and prognosis oriented maintenance management, and takes a look at the cutting-edge discipline of intelligent failure prognosis technologies for condition-based maintenance.  Latest research results and application methods are introduced for signal processing, reliability moelling, deterioration evaluation, residual life prediction and maintenance-optimization as well as applications of these methods.

  18. Windows with an improved energy balance of 30%

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe

    in the guarded hotbox facility at the institute and a total U-value of about 1.2 W/(m2 K) have been measured, which is a reduction compared with the reference window of 0.2 W/(m2 K). The improvements have primarily been obtained by replacing parts of the frame construction with polystyrene foam insulation. Other....... The transparent area forms about 68% of the total window area and the total U-value of the window is about 1.4 W/(m2 K).The energy balance depends strongly of the window orientation and the thermal mass of the room behind. In order to characterize the energy balance of a window with a single value a method has...... been developed, which combines the results from several different building types and building orientations. The energy balance of the reference window has been calculated to -50 kWh/m2 window area, i.e. the refence window accounts for a net energy consumption for space heating of 50 kWh/m2 window area...

  19. Vacuum window glazings for energy-efficient buildings

    Energy Technology Data Exchange (ETDEWEB)

    Benson, D.K.; Smith, L.K.; Tracy, C.E.; Potter, T.; Christensen, C. (Solar Energy Research Inst., Golden, CO (USA)); Soule, D.E. (Western Illinois Univ., Macomb, IL (USA))

    1990-05-01

    The technical feasibility of a patented, laser-welded, evacuated insulating window was studied. The window has two edge-sealed sheets of glass separated by 0.5-mm glass spheres spaced 30 mm apart in a regular array. A highly insulating frame is required and several designs were analyzed. The vacuum window's combination of high solar transmittance and low thermal conductance makes it superior to many other windows in cold climates. In the US Pacific Northwest, the vacuum window could save about 6 MJ of heating energy annually per square meter of window in comparison to conventional, double-glazed windows. A large, vacuum laser-welding facility was designed and installed to conduct glass welding experiments and to fabricate full-sized vacuum windows. Experiments confirmed the feasibility of laser-sealing glass in vacuum but identified two difficulties. Under some circumstances, bubbles of dissolved gases form during welding and weaken the seal. Glass also vaporizes and contaminates the laser beam steering mirror. A novel moving metal foil mirror was developed to circumvent the contamination problem, but it has not yet been used to complete welding experiments and fabricate full-sized vacuum windows. 63 refs., 53 figs., 19 tabs.

  20. Windows with an improved energy balance of 30%

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe

    The aim of the project has been to investigate and to develop thermally improved windows based on an evaluation of the energy balance of the window, i.e. the total influence of the window on the energy consumption for space heating. The energy balance is the net heat flow per window area which...... means that both energy losses and transmittance of solar radiation is considered.The final goal of the project was to improve the energy balance of a window with at least 30%. As reference is chosen a common low energy glazing mounted in a wooden frame construction measuring 1188 × 1188 mm2....... The transparent area forms about 68% of the total window area and the total U-value of the window is about 1.4 W/(m2 K).The energy balance depends strongly of the window orientation and the thermal mass of the room behind. In order to characterize the energy balance of a window with a single value a method has...

  1. Property Analysis of the Agricultural Machinery Lubricants

    Directory of Open Access Journals (Sweden)

    Tone Ploj

    2000-03-01

    Full Text Available We need to produce enough healthy and cheap food as well as to preserve the ecologic equilibrium. This can be achived by using modern machinery and up- to-date knowledge and technology. Agricultural machinery, in which 40-60% of all funds are invested, is poorly maintained and underused. The main causes for this are poor knowledge and extensive farm land fragmentation. The fact that over 140,000 tractors in Slovenia are on average 9.6 years old, i.e. that more than 80% of overall agricultural machinery is obsolete, should be a matter of serious concern. In the paper we follow tribological conditions in particular tractor assemblies. In the first part of the paper we have treated the required conditions of tractor manufacturers in Europe and primarily in Slovenia, what has served us in the final phase of the research for elaboration of the model. In this way we have got data about the presence of particular tractor types. We have separately elaborated the necessary specifications of engine lubricants, transmission, gears, hydraulics and wet breaks. We have carried out chemical and mechanical analyses of all accessible lubricants in agricultural mechanisation. The results of the new oils were coordinated with the required specifications of tractor manufacturers and so we have got such a model, that certainly meet all lubricating requirements of our tractors.

  2. The exportomer: the peroxisomal receptor export machinery.

    Science.gov (United States)

    Platta, Harald W; Hagen, Stefanie; Erdmann, Ralf

    2013-04-01

    Peroxisomes constitute a dynamic compartment of almost all eukaryotic cells. Depending on environmental changes and cellular demands peroxisomes can acquire diverse metabolic roles. The compartmentalization of peroxisomal matrix enzymes is a prerequisite to carry out their physiologic function. The matrix proteins are synthesized on free ribosomes in the cytosol and are ferried to the peroxisomal membrane by specific soluble receptors. Subsequent to cargo release into the peroxisomal matrix, the receptors are exported back to the cytosol to facilitate further rounds of matrix protein import. This dislocation step is accomplished by a remarkable machinery, which comprises enzymes required for the ubiquitination as well as the ATP-dependent extraction of the receptor from the membrane. Interestingly, receptor ubiquitination and dislocation are the only known energy-dependent steps in the peroxisomal matrix protein import process. The current view is that the export machinery of the receptors might function as molecular motor not only in the dislocation of the receptors but also in the import step of peroxisomal matrix protein by coupling ATP-dependent removal of the peroxisomal import receptor with cargo translocation into the organelle. In this review we will focus on the architecture and function of the peroxisomal receptor export machinery, the peroxisomal exportomer.

  3. WINDOW-CLEANING

    CERN Multimedia

    Environmental Section / ST-TFM

    2001-01-01

    The two-month window-cleaning session on the Meyrin, Prévessin and LEP sites will soon begin. The cleaning contractors will work from Monday to Saturday, every week from 4.00 a.m. to 8.00 p.m. The work will be organised so as to disturb users as little as possible. In any event, a work notice will be left in each office 24 hours beforehand. To prevent any damage to documents or items which could occur despite the precautions taken, please clear completely the window-sills and the area immediately around them. If, however, for valid reasons, the work cannot be done on the scheduled day, please inform the Environmental Section by telephoning: 73753 / 74233 / 72242 If you are going to be absent during this two-month period, we should be grateful if you would clear the above mentioned areas before your departure. REMINDER To allow more thorough cleaning of the entrance doors to buildings and also facilitate the weekly work of the cleaning contractors, we ask you to make use of the notice boards at the...

  4. WINDOW-CLEANING

    CERN Multimedia

    Environmental Section / ST-TFM

    2001-01-01

    The two-month window-cleaning session on the Meyrin, Prévessin and LEP sites will soon begin. The cleaning contractors will work from Monday to Saturday, every week from 4.00 a.m. to 8.00 p.m. The work will be organised so as to disturb users as little as possible. In any event, a work notice will be left in each office 24 hours beforehand. To prevent any damage to documents or items which could occur despite the precautions taken, please clear completely the window-sills and the area immediately around them. If, however, for valid reasons, the work cannot be done on the scheduled day, please inform the Environmental Section by telephoning: 73753 / 74233 / 72242 If you are going to be absent during this two-month period, we should be grateful if you would clear the above mentioned areas before your departure. REMINDER To allow more thorough cleaning of the entrance doors to buildings and also facilitate the weekly work of the cleaning contractors, we ask you to make use of the notice boards at the...

  5. The plastid-dividing machinery: formation, constriction and fission.

    Science.gov (United States)

    Yoshida, Yamato; Miyagishima, Shin-ya; Kuroiwa, Haruko; Kuroiwa, Tsuneyoshi

    2012-12-01

    Plastids divide by constriction of the plastid-dividing (PD) machinery, which encircles the division site. The PD machinery consists of the stromal inner machinery which includes the inner PD and filamenting temperature-sensitive mutant Z (FtsZ) rings and the cytosolic outer machinery which includes the outer PD and dynamin rings. The major constituent of the PD machinery is the outer PD ring, which consists of a bundle of polyglucan filaments. In addition, recent proteomic studies suggest that the PD machinery contains additional proteins that have not been characterized. The PD machinery forms from the inside to the outside of the plastid. The constriction seems to occur by sliding of the polyglucan filaments of the outer PD ring, aided by dynamin. The final fission of the plastid is probably promoted by the 'pinchase' activity of dynamin.

  6. 基于滑动窗口模型空间重组的网络流量检测%Detection of Network Traffic with Space Reconstruction Based on Sliding Windows Model

    Institute of Scientific and Technical Information of China (English)

    李风芝

    2014-01-01

    为克服传统时间序列分析方法对小数据信息数据和非平稳序列检测不稳定的限制,引入滑动窗口模型思想,提出了滑动时间窗口模型的网络流量序列重组空间异构的检测方法。通过计算仿真得到不同时间窗阈值下的网络流量序列递归图,检验出网络总出口流量的确定性。通过提取递归图中异常特征点的定量递归特征的方法实现对流量异常的检测和评估。仿真实验表明,提取的流量序列定量递归特征具有较强的稳定性和自相似性,算法能有效检测出网络流量序列的隐藏异常波,尤其适合于小数据量时间序列和非平稳数据的检测和分析。%In order to overcome unstable property of the traditional time series analysis method in the detection of small da-ta information data and non stationary sequence, an new and improved anomaly detection of network traffic sequence with space reconstruction based on sliding time windows model was proposed. The recurrence quantification analysis features such as recurrence rate and determinism, etc. were proposed for analyzing the stability and prediction property. And the anomaly detection and estimation of campus network traffic was realized based on recurrence plot analysis by extracting the abnormal points in recurrence plot. Simulation results show that the recurrence quantification analysis features of network traffic sequence have strong stability and self similarity, detection algorithm can detect the hidden abnormal wave effective-ly, it is suitable for small data time and non-stationary data series detection and analysis especially.

  7. Window observers for linear systems

    Directory of Open Access Journals (Sweden)

    Utkin Vadim

    2000-01-01

    Full Text Available Given a linear system x ˙ = A x + B u with output y = C x and a window function ω ( t , i.e., ∀ t , ω ( t ∈ {0,1 }, and assuming that the window function is Lebesgue measurable, we refer to the following observer, x ˆ = A x + B u + ω ( t L C ( x − x ˆ as a window observer. The stability issue is treated in this paper. It is proven that for linear time-invariant systems, the window observer can be stabilized by an appropriate design under a very mild condition on the window functions, albeit for linear time-varying system, some regularity of the window functions is required to achieve observer designs with the asymptotic stability. The corresponding design methods are developed. An example is included to illustrate the possible applications

  8. Real Clifford Windowed Fourier Transform

    Institute of Scientific and Technical Information of China (English)

    Mawardi BAHRI; Sriwulan ADJI; Ji Man ZHAO

    2011-01-01

    We study the windowed Fourier transform in the framework of Clifford analysis, which we call the Clifford windowed Fourier transform (CWFT). Based on the spectral representation of the Clifford Fourier transform (CFT), we derive several important properties such as shift, modulation,reconstruction formula, orthogonality relation, isometry, and reproducing kernel. We also present an example to show the differences between the classical windowed Fourier transform (WFT) and the CWFT. Finally, as an application we establish a Heisenberg type uncertainty principle for the CWFT.

  9. Windows 7 The Missing Manual

    CERN Document Server

    Pogue, David

    2010-01-01

    In early reviews, geeks raved about Windows 7. But if you're an ordinary mortal, learning what this new system is all about will be challenging. Fear not: David Pogue's Windows 7: The Missing Manual comes to the rescue. Like its predecessors, this book illuminates its subject with reader-friendly insight, plenty of wit, and hardnosed objectivity for beginners as well as veteran PC users. Windows 7 fixes many of Vista's most painful shortcomings. It's speedier, has fewer intrusive and nagging screens, and is more compatible with peripherals. Plus, Windows 7 introduces a slew of new features,

  10. Windows 7 the definitive guide

    CERN Document Server

    Stanek, William R

    2010-01-01

    This book provides everything you need to manage and maintain Windows 7. You'll learn all of the features and enhancements in complete detail, along with specifics for configuring the operating system to put you in full control. Bestselling author and Windows expert William Stanek doesn't just show you the steps you need to follow, he also tells you how features work, why they work, and how you can customize them to meet your needs. Learn how to squeeze every bit of power out of Windows 7 to take full advantage of its features and programs. Set up, customize, and tune Windows 7-Optimize its

  11. 探索Windows2001

    Institute of Scientific and Technical Information of China (English)

    李红

    2000-01-01

    Window S2000刚刚发布,微软就在开发其后继产品WindowS2001(产品代号Whistler),Windows 2001就是传说中的Windows Whistler,微软在.net计划中称之为“下个版本的Windows”,它将是第一个同时包含消费型和商业型操作系统代码的Windows,采用基于XML的全新用户界面(被称作“视觉风格”)。

  12. Microsoft Windows Operating System Essentials

    CERN Document Server

    Carpenter, Tom

    2012-01-01

    A full-color guide to key Windows 7 administration concepts and topics Windows 7 is the leading desktop software, yet it can be a difficult concept to grasp, especially for those new to the field of IT. Microsoft Windows Operating System Essentials is an ideal resource for anyone new to computer administration and looking for a career in computers. Delving into areas such as fundamental Windows 7 administration concepts and various desktop OS topics, this full-color book addresses the skills necessary for individuals looking to break into a career in IT. Each chapter begins with a list of topi

  13. Subject Responses to Electrochromic Windows

    Energy Technology Data Exchange (ETDEWEB)

    Clear, Robert; Inkarojrit, Vorapat; Lee, Eleanor

    2006-03-03

    Forty-three subjects worked in a private office with switchable electrochromic windows, manually-operated Venetian blinds, and dimmable fluorescent lights. The electrochromic window had a visible transmittance range of approximately 3-60%. Analysis of subject responses and physical data collected during the work sessions showed that the electrochromic windows reduced the incidence of glare compared to working under a fixed transmittance (60%) condition. Subjects used the Venetian blinds less often and preferred the variable transmittance condition, but used slightly more electric lighting with it than they did when window transmittance was fixed.

  14. Beginning Windows 8.1

    CERN Document Server

    Halsey, Mike

    2013-01-01

    Windows 8 has been described by Microsoft as its 'boldest' Windows release ever and the 8.1 update enhances the paradigm further. Beginning Windows 8.1 takes you through the new features and helps you get more out of the familiar to reveal the fullest possibilities for this amazing new operating system. You will learn, with non-technical language used throughout, how to get up and running in the new Windows interface, minimize downtime, maximize productivity, and harness the features you never knew existed to take control of your computer and enjoy the peace of mind and excitement that comes w

  15. Analysis of electric machinery and drive systems

    CERN Document Server

    Krause, Paul C; Sudhoff, Scott D; Pekarek, Steven

    2013-01-01

    Introducing a new edition of the popular reference on machine analysis Now in a fully revised and expanded edition, this widely used reference on machine analysis boasts many changes designed to address the varied needs of engineers in the electric machinery, electric drives, and electric power industries. The authors draw on their own extensive research efforts, bringing all topics up to date and outlining a variety of new approaches they have developed over the past decade. Focusing on reference frame theory that has been at the core of this work since the first edition, th

  16. The RNA polymerase I transcription machinery

    OpenAIRE

    Russell, Jackie; Zomerdijk, Joost C. B. M.

    2006-01-01

    The rRNAs constitute the catalytic and structural components of the ribosome, the protein synthesis machinery of cells. The level of rRNA synthesis, mediated by Pol I (RNA polymerase I), therefore has a major impact on the life and destiny of a cell. In order to elucidate how cells achieve the stringent control of Pol I transcription, matching the supply of rRNA to demand under different cellular growth conditions, it is essential to understand the components and mechanics of the Pol I transc...

  17. Optimisation of sampling windows design for population pharmacokinetic experiments.

    Science.gov (United States)

    Ogungbenro, Kayode; Aarons, Leon

    2008-08-01

    This paper describes an approach for optimising sampling windows for population pharmacokinetic experiments. Sampling windows designs are more practical in late phase drug development where patients are enrolled in many centres and in out-patient clinic settings. Collection of samples under the uncontrolled environment at these centres at fixed times may be problematic and can result in uninformative data. Population pharmacokinetic sampling windows design provides an opportunity to control when samples are collected by allowing some flexibility and yet provide satisfactory parameter estimation. This approach uses information obtained from previous experiments about the model and parameter estimates to optimise sampling windows for population pharmacokinetic experiments within a space of admissible sampling windows sequences. The optimisation is based on a continuous design and in addition to sampling windows the structure of the population design in terms of the proportion of subjects in elementary designs, number of elementary designs in the population design and number of sampling windows per elementary design is also optimised. The results obtained showed that optimal sampling windows designs obtained using this approach are very efficient for estimating population PK parameters and provide greater flexibility in terms of when samples are collected. The results obtained also showed that the generalized equivalence theorem holds for this approach.

  18. Schematic Window Methodology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Using a set of accurate analytic Variation of Parameters (VOP) equations for orbit propagation, and a method for defining and ‘mixing-and-matching’...

  19. Windows forensic analysis toolkit advanced analysis techniques for Windows 7

    CERN Document Server

    Carvey, Harlan

    2012-01-01

    Now in its third edition, Harlan Carvey has updated "Windows Forensic Analysis Toolkit" to cover Windows 7 systems. The primary focus of this edition is on analyzing Windows 7 systems and on processes using free and open-source tools. The book covers live response, file analysis, malware detection, timeline, and much more. The author presents real-life experiences from the trenches, making the material realistic and showing the why behind the how. New to this edition, the companion and toolkit materials are now hosted online. This material consists of electronic printable checklists, cheat sheets, free custom tools, and walk-through demos. This edition complements "Windows Forensic Analysis Toolkit, 2nd Edition", (ISBN: 9781597494229), which focuses primarily on XP. It includes complete coverage and examples on Windows 7 systems. It contains Lessons from the Field, Case Studies, and War Stories. It features companion online material, including electronic printable checklists, cheat sheets, free custom tools, ...

  20. Effect of window shape on the detection of hyperuniformity via the local number variance

    Science.gov (United States)

    Kim, Jaeuk; Torquato, Salvatore

    2017-01-01

    Hyperuniform many-particle systems in d-dimensional space {{{R}}d} , which includes crystals, quasicrystals, and some exotic disordered systems, are characterized by an anomalous suppression of density fluctuations at large length scales such that the local number variance within a ‘spherical’ observation window grows slower than the window volume. In usual circumstances, this direct-space condition is equivalent to the Fourier-space hyperuniformity condition that the structure factor vanishes as the wavenumber goes to zero. In this paper, we comprehensively study the effect of aspherical window shapes with characteristic size L on the direct-space condition for hyperuniform systems. For lattices, we demonstrate that the variance growth rate can depend on the shape as well as the orientation of the windows, and in some cases, the growth rate can be faster than the window volume (i.e. L d ), which may lead one to falsely conclude that the system is non-hyperuniform solely according to the direct-space condition. We begin by numerically investigating the variance of two-dimensional lattices using ‘superdisk’ windows, whose convex shapes continuously interpolate between circles (p  =  1) and squares (p\\to ∞ ), as prescribed by a deformation parameter p, when the superdisk symmetry axis is aligned with the lattice. Subsequently, we analyze the variance for lattices as a function of the window orientation, especially for two-dimensional lattices using square windows (superdisk when p\\to ∞ ). Based on this analysis, we explain the reason why the variance for d  =  2 can grow faster than the window area or even slower than the window perimeter (e.g. like \\ln (L) ). We then study the generalized condition of the window orientation, under which the variance can grow as fast as or faster than L d (window volume), to the case of Bravais lattices and parallelepiped windows in {{{R}}d} . In the case of isotropic disordered hyperuniform systems, we

  1. Learning Windows Azure Mobile Services for Windows 8 and Windows Phone 8

    CERN Document Server

    Webber-Cross, Geoff

    2014-01-01

    This book is based around a case study game which was written for the book. This means that the chapters progress in a logical way and build upon lessons learned as we go. Real-world examples are provided for each topic that are practical and not given out-of-context so they can be applied directly to other applications.If you are a developer who wishes to build Windows 8 and Phone 8 applications and integrate them with Windows Azure Mobile Services, this book is for you. Basic C# and JavaScript skills are advantageous, as well as some knowledge of building Windows 8 or Windows Phone 8 applica

  2. Rotating Machinery Predictive Maintenance Through Expert System

    Directory of Open Access Journals (Sweden)

    M. Sarath Kumar

    2000-01-01

    Full Text Available Modern rotating machines such as turbomachines, either produce or absorb huge amount of power. Some of the common applications are: steam turbine-generator and gas turbine-compressor-generator trains produce power and machines, such as pumps, centrifugal compressors, motors, generators, machine tool spindles, etc., are being used in industrial applications. Condition-based maintenance of rotating machinery is a common practice where the machine's condition is monitored constantly, so that timely maintenance can be done. Since modern machines are complex and the amount of data to be interpreted is huge, we need precise and fast methods in order to arrive at the best recommendations to prevent catastrophic failure and to prolong the life of the equipment. In the present work using vibration characteristics of a rotor-bearing system, the condition of a rotating machinery (electrical rotor is predicted using an off-line expert system. The analysis of the problem is carried out in an Object Oriented Programming (OOP framework using the finite element method. The expert system which is also developed in an OOP paradigm gives the type of the malfunctions, suggestions and recommendations. The system is implemented in C++.

  3. Evolution of the chloroplast division machinery

    Institute of Scientific and Technical Information of China (English)

    Hongbo GAO; Fuli GAO

    2011-01-01

    Chloroplasts are photosynthetic organelles derived from endosymbiotic cyanobacteria during evolution.Dramatic changes occurred during the process of the formation and evolution of chloroplasts,including the large-scale gene transfer from chloroplast to nucleus.However,there are still many essential characters remaining.For the chloroplast division machinery,FtsZ proteins,Ftn2,SulA and part of the division site positioning system- MinD and MinE are still conserved.New or at least partially new proteins,such as FtsZ family proteins FtsZl and ARC3,ARC6H,ARC5,PDV1,PDV2 and MCD1,were introduced for the division of chloroplasts during evolution.Some bacterial cell division proteins,such as FtsA,MreB,Ftn6,FtsW and Ftsl,probably lost their function or were gradually lost.Thus,the chloroplast division machinery is a dynamically evolving structure with both conservation and innovation.

  4. Window prototypes during the project

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe

    1996-01-01

    The conditions for the PASSYS test and the results of the measurements on one of the aerogel window prototypes are described.......The conditions for the PASSYS test and the results of the measurements on one of the aerogel window prototypes are described....

  5. The workplace window view

    DEFF Research Database (Denmark)

    Lottrup, Lene Birgitte Poulsen; Stigsdotter, Ulrika K.; Meilby, Henrik

    2015-01-01

    Office workers’ job satisfaction and ability to work are two important factors for the viability and competitiveness of most companies, and existing studies in contexts other than workplaces show relationships between a view of natural elements and, for example, student performance and neighbourh......Office workers’ job satisfaction and ability to work are two important factors for the viability and competitiveness of most companies, and existing studies in contexts other than workplaces show relationships between a view of natural elements and, for example, student performance...... and neighbourhood satisfaction. This study investigates whether relationships between window view, and work ability and job satisfaction also exist in the context of the workplace by focusing on office workers’ view satisfaction. The results showed that a view of natural elements was related to high view...... satisfaction, and that high view satisfaction was related to high work ability and high job satisfaction. Furthermore, the results indicated that job satisfaction mediated the effect of view satisfaction on work ability. These findings show that a view of a green outdoor environment at the workplace can...

  6. On Development of Agricultural Machinery Operating Service in Chongqing

    Institute of Scientific and Technical Information of China (English)

    Chongjing; TAN; Shi; YANG

    2015-01-01

    Development of agricultural machinery operating service in Chongqing takes on rapid increase in number of service organizations,diversified service methods,improvement in service level,and constant service income. However,there are some problems,including unreasonable composition and small scale of service organization,imbalanced development of four service methods,low service level,and low operating income of agricultural machinery households. To accelerate development of agricultural machinery operating service in Chongqing,it is recommended to take following measures: adjusting subsidy for purchase and operation of agricultural machinery; improving fiscal and taxation and financial system; speeding up infrastructure construction,establishing agricultural machinery information network,and improving organizational form and methods of agricultural machinery operating service.

  7. Handbook on Windows and Energy

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Schultz, Jørgen Munthe; Svendsen, Sv Aa Højgaard

    The handbook on windows and energy is a general description of windows with the main focus put on the energy performance. Common window products are described by commonly used nomenclature, description of frame and sash conctructions and description of commonly used glazing types.The energy...... flow and detailed calculation of light and solar transmittance is given.Different measurement techniques for characterization of window heat loss coefficient and total solar energy transmittance is described and references to interantional standards are given.Finally, the handbook includes...... a comprehensive list of window related standards and a list of Nordic research and development projects.Two programs are encloased in the handbook for calculation of solar radiation on inclined surfaces including a shadow correction and a simple program for evaluation of energy savings and risk of overtemperature....

  8. Securing Applications in Windows Phone

    Directory of Open Access Journals (Sweden)

    B. Venkat Sandeep

    2012-06-01

    Full Text Available Windows Phone 7 has been planned with speed in mind. Windows phone is the new baby from Microsoft which is impressed by its features. More than 80,000 apps have now been published in the Windows Phone Marketplace and new content is currently being added at the rate of 340 apps per day [1]. Although there are many benefits, these are not without risks. Most of today’s mobile applications are transaction based, the security is even greater. In this paper we will discuss about the security in mobile devices, and how the windows phone has supported in developing secure applications. Also discuss about the isolated storage feature in windows phone. As security is more important for the Mobile devices, this also discusses how the additional security is provided to the apps.

  9. Thermal bridges of modern windows

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place; Møller, Eva B.; Nielsen, Anker

    2013-01-01

    With its focus on reduced energy consumption, contemporary housing construction requires a highly insulated and airtight building envelope with as few thermal bridges as possible.Windows must be carefully designed, as thermal bridges can lead to surface condensation or mold growth, even...... if the window has an U-factor of 1 W/(m2·K) or lower. This paper describes the development of modern, energy efficient Danish windows with reduced thermal bridges. It focuses on materials, geometry, and sealing of window panes based on a literature review. Examples of modern windows are presented. Experience...... with the minimum acceptable surface temperature regarding surface condensation or mold growth, implemented in the Danish Building Regulations in 2010, and the calculation method for this temperature based on international standards is discussed. The introduction of the minimum acceptable surface temperature has...

  10. Improved Windows for Cold Climates

    DEFF Research Database (Denmark)

    Laustsen, Jacob Birck; Svendsen, Svend

    2005-01-01

    of the heating demand in typical single-family houses in Denmark and Greenland. The examined windows are typical new windows from Nordic countries and new proposals of improved windows with low thermal transmittance and high total solar energy transmittance. The results show that net energy gain can be increased...... considerably by reducing the frame width, which results in a larger transparent area causing a larger solar gain but still main-taining a low thermal transmittance. Using three layers of glass with large gaps, using very slim frame profiles, and omitting the edge constructions that normally causes thermal...... bridges achieve this. Applying shutters or low emissivity coated roller blinds incorporated in the glazing that are activated during night time can improve the energy performance of windows. The results from this work show that it is possible to develop windows with a positive net energy in a fairly...

  11. Windows for tablets for dummies

    CERN Document Server

    Rathbone, Andy

    2013-01-01

    Just for you--Windows 8 from the tablet user's perspective If you're an experienced Windows user, you don't need a guide to everything that Windows 8 can do, just to those tools and functions that work on your tablet. And so here it is. This new book zeros in on what you need to know to work best on your tablet with Windows 8. Topics include navigating the new Windows 8 interface and how it works on a touchscreen, how to safely connect to the Internet, how to work with apps or share your tablet in a group, and much more. If you're a new tablet user, you'll particularly appre

  12. Prism Window for Optical Alignment

    Science.gov (United States)

    Tang, Hong

    2008-01-01

    A prism window has been devised for use, with an autocollimator, in aligning optical components that are (1) required to be oriented parallel to each other and/or at a specified angle of incidence with respect to a common optical path and (2) mounted at different positions along the common optical path. The prism window can also be used to align a single optical component at a specified angle of incidence. Prism windows could be generally useful for orienting optical components in manufacture of optical instruments. "Prism window" denotes an application-specific unit comprising two beam-splitter windows that are bonded together at an angle chosen to obtain the specified angle of incidence.

  13. ABOUT ETHICS IN PLANT, MACHINERY AND EQUIPMENT VALUATION DOMAIN

    Directory of Open Access Journals (Sweden)

    Sorin Adrian Achim

    2015-09-01

    Full Text Available In this paper we put in discussion some ethical aspects of plant, machinery and equipment valuation. After a presentation of the general issues of ethics in valuation domain, we analyze the application of the fundamental ethical principles in plant, machinery and equipment valuation domain. To support our conclusions we use some findings of a study that we conducted to identify the particularities of the plant, machinery and equipment valuation activity in Romania.

  14. General Course of Failure Distributions at Complex Machineries

    Directory of Open Access Journals (Sweden)

    Naqib Daneshjo

    2017-02-01

    Full Text Available In the process of maintenance management of machinery and devices there is necessity to keep in the mind "construction technologicity” (ability of construction technology. This term is used in evaluating of machinery construction, their groups and components in terms of production. The aim of management and planning maintenance of machinery is the failure-free operation in the application process. The range of machinery maintenance machines from routine one and inspection to general repairs is important to organize in a way to prevent unplanned idle time and failures or very likely to accidents.

  15. The phototransduction machinery in the rod outer segment has a strong efficacy gradient

    KAUST Repository

    Mazzolini, Monica

    2015-05-04

    Rod photoreceptors consist of an outer segment (OS) and an inner segment. Inside the OS a biochemical machinery transforms the rhodopsin photoisomerization into electrical signal. This machinery has been treated as and is thought to be homogenous with marginal inhomogeneities. To verify this assumption, we developed a methodology based on special tapered optical fibers (TOFs) to deliver highly localized light stimulations. By using these TOFs, specific regions of the rod OS could be stimulated with spots of light highly confined in space. As the TOF is moved from the OS base toward its tip, the amplitude of saturating and single photon responses decreases, demonstrating that the efficacy of the transduction machinery is not uniform and is 5-10 times higher at the base than at the tip. This gradient of efficacy of the transduction machinery is attributed to a progressive depletion of the phosphodiesterase along the rod OS. Moreover we demonstrate that, using restricted spots of light, the duration of the photoresponse along the OS does not increase linearly with the light intensity as with diffuse light. © 2015, National Academy of Sciences. All rights reserved.

  16. The phototransduction machinery in the rod outer segment has a strong efficacy gradient.

    Science.gov (United States)

    Mazzolini, Monica; Facchetti, Giuseppe; Andolfi, Laura; Proietti Zaccaria, Remo; Tuccio, Salvatore; Treu, Johannes; Altafini, Claudio; Di Fabrizio, Enzo M; Lazzarino, Marco; Rapp, Gert; Torre, Vincent

    2015-05-19

    Rod photoreceptors consist of an outer segment (OS) and an inner segment. Inside the OS a biochemical machinery transforms the rhodopsin photoisomerization into electrical signal. This machinery has been treated as and is thought to be homogenous with marginal inhomogeneities. To verify this assumption, we developed a methodology based on special tapered optical fibers (TOFs) to deliver highly localized light stimulations. By using these TOFs, specific regions of the rod OS could be stimulated with spots of light highly confined in space. As the TOF is moved from the OS base toward its tip, the amplitude of saturating and single photon responses decreases, demonstrating that the efficacy of the transduction machinery is not uniform and is 5-10 times higher at the base than at the tip. This gradient of efficacy of the transduction machinery is attributed to a progressive depletion of the phosphodiesterase along the rod OS. Moreover we demonstrate that, using restricted spots of light, the duration of the photoresponse along the OS does not increase linearly with the light intensity as with diffuse light.

  17. High-Reliability Waveguide Vacuum/Pressure Window

    Science.gov (United States)

    Britcliffe, Michael J.; Hanson, Theodore R.; Long, Ezra M.; Montanez, Steven

    2013-01-01

    The NASA Deep Space Network (DSN) uses commercial waveguide windows on the output waveguide of Ka-band (32 GHz) low-noise amplifiers. Mechanical failure of these windows resulted in an unacceptable loss in tracking time. To address this issue, a new Ka-band WR-28 waveguide window has been designed, fabricated, and tested. The window uses a slab of low-loss, low-dielectric constant foam that is bonded into a 1/2-wave-thick waveguide/flange. The foam is a commercially available, rigid, closed-cell polymethacrylimide. It has excellent electrical properties with a dielectric constant of 1.04, and a loss tangent of 0.01. It is relatively strong with a tensile strength of 1 MPa. The material is virtually impermeable to helium. The finished window exhibits a leak rate of less than 3x10(exp -3)cu cm/s with helium. The material is also chemically resistant and can be cleaned with acetone. The window is constructed by fabricating a window body by brazing a short length of WR-28 copper waveguide into a standard rectangular flange, and machining the resulting part to a thickness of 4.6 mm. The foam is machined to a rectangular shape with a dimension of 7.06x3.53 mm. The foam is bonded into the body with a two-part epoxy. After curing, the excess glue and foam are knife-trimmed by hand. The finished window has a loss of less than 0.08 dB (2%) and a return loss of greater than 25 dB at 32 GHz. This meets the requirements for the DSN application. The window is usable for most applications over the entire 26-to-40-GHz waveguide band. The window return loss can be tuned to a required frequency by var y in g the thickness of the window slightly. Most standard waveguide windows use a thin membrane of material bonded into a recess in a waveguide flange, or sandwiched between two flanges with a polymer seal. Designs using the recessed window are prone to mechanical failure over time due to constraints on the dimensions of the recess that allow the bond to fail. Designs using the

  18. Conformal ALON® and spinel windows

    Science.gov (United States)

    Goldman, Lee M.; Smith, Mark; Ramisetty, Mohan; Jha, Santosh; Sastri, Suri

    2017-05-01

    The requirements for modern aircraft based reconnaissance systems are driving the need for conformal windows for future sensor systems. However, limitations on optical systems and the ability to produce windows in complex geometries currently limit the geometry of existing windows and window assemblies to faceted assemblies of flat windows. ALON consists primarily of aluminum and oxygen, similar to that of alumina, with a small amount of nitrogen added to help stabilize the cubic gamma-AlON phase. ALON's chemical similarity to alumina, translates into a robust manufacturing process. This ease of processing has allowed Surmet to produce ALON windows and domes in a wide variety of geometries and sizes. Spinel (MgAl2O4) contains equal molar amounts of MgO and Al2O3, and is a cubic material, that transmits further into the Infrared than ALON. Spinel is produced via powder processing techniques similar to those used to produce ALON. Surmet is now applying the lessons learned with ALON to produce conformal spinel windows and domes as well.

  19. Accessorizing the human mitochondrial transcription machinery.

    Science.gov (United States)

    Bestwick, Megan L; Shadel, Gerald S

    2013-06-01

    The human genome comprises large chromosomes in the nucleus and mitochondrial DNA (mtDNA) housed in the dynamic mitochondrial network. Human cells contain up to thousands of copies of the double-stranded, circular mtDNA molecule that encodes essential subunits of the oxidative phosphorylation complexes and the rRNAs and tRNAs needed to translate these in the organelle matrix. Transcription of human mtDNA is directed by a single-subunit RNA polymerase, POLRMT, which requires two primary transcription factors, TFB2M (transcription factor B2, mitochondrial) and TFAM (transcription factor A, mitochondrial), to achieve basal regulation of the system. Here, we review recent advances in understanding the structure and function of the primary human transcription machinery and the other factors that facilitate steps in transcription beyond initiation and provide more intricate control over the system. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. On the mechanochemical machinery underlying chromatin remodeling

    Science.gov (United States)

    Yusufaly, Tahir I.

    This dissertation discuss two recent efforts, via a unique combination of structural bioinformatics and density functional theory, to unravel some of the details concerning how molecular machinery within the eukaryotic cell nucleus controls chromatin architecture. The first, a study of the 5-methylation of cytosine in 5'-CG-3' : 5'-CG-3' base-pair steps, reveals that the methyl groups roughen the local elastic energy landscape of the DNA. This enhances the probability of the canonical B-DNA structure transitioning into the undertwisted A-like and overtwisted C-like forms seen in nucleosomes, or looped segments of DNA bound to histones. The second part focuses on the formation of salt bridges between arginine residues in histones and phosphate groups on the DNA backbone. The arginine residues are ob- served to apply a tunable mechanical load to the backbone, enabling precision-controlled activation of DNA deformations.

  1. The SNARE machinery in mast cell secretion

    Directory of Open Access Journals (Sweden)

    Axel eLorentz

    2012-06-01

    Full Text Available Mast cells are known as inflammatory cells which exert their functions in allergic and anaphylactic reactions by secretion of numerous inflammatory mediators. During an allergic response, the high-affinity IgE receptor, FcεRI, becomes cross-linked by receptor-bound IgE and antigen resulting in immediate release of pre-synthesized mediators – stored in granules – as well as in de novo synthesis of various mediators like cytokines and chemokines. Soluble N-ethylmaleimide-Sensitive Factor (NSF Attachment Protein (SNAP Receptors (SNARE proteins were found to play a central role in regulating membrane fusion events during exocytosis. In addition, several accessory regulators like Munc13, Munc18, Rab GTPases, SCAMPs, complexins or synaptotagmins were found to be involved in membrane fusion. In this review we summarize our current knowledge about the SNARE machinery and its mechanism of action in mast cell secretion.

  2. Numerical Noise Prediction in Fluid Machinery

    Institute of Scientific and Technical Information of China (English)

    Iris PANTLE; Franco MAGAGNATO; Martin GABI

    2005-01-01

    Numerical methods successively became important in the design and optimization of fluid machinery. However,as noise emission is considered, one can hardly find standardized prediction methods combining flow and acoustical optimization. Several numerical field methods for sound calculations have been developed. Due to the complexity of the considered flow, approaches must be chosen to avoid exhaustive computing. In this contribution the noise of a simple propeller is investigated. The configurations of the calculations comply with an existing experimental setup chosen for evaluation. The used in-house CFD solver SPARC contains an acoustic module based on Ffowcs Williams-Hawkings Acoustic Analogy. From the flow results of the time dependent Large Eddy Simulation the time dependent acoustic sources are extracted and given to the acoustic module where relevant sound pressure levels are calculated. The difficulties, which arise while proceeding from open to closed rotors and from gas to liquid are discussed.

  3. Windows 8 visual quick tips

    CERN Document Server

    McFedries, Paul

    2012-01-01

    Easy-in, easy-out format covers all the bells and whistles of Windows 8 If you want to learn how to work smarter and faster in Microsoft's Windows 8 operating system, this easy-to-use, compact guide delivers the goods. Designed for visual learners, it features short explanations and full-color screen shots on almost every page, and it's packed with timesaving tips and helpful productivity tricks. From enhancing performance and managing digital content to setting up security and much more, this handy guide will help you get more out of Windows 8. Uses full-color screen shots and short, step-by-

  4. Windows Phone 7 Made Simple

    CERN Document Server

    Trautschold, Martin

    2011-01-01

    With Windows Phone 7, Microsoft has created a completely new smartphone operating system that focuses on allowing users to be productive with their smartphone in new ways, while offering seamless integration and use of Microsoft Office Mobile as well as other productivity apps available in the Microsoft App Store. Windows Phone 7 Made Simple offers a clear, visual, step-by-step approach to using your Windows Phone 7 smartphone, no matter what the manufacturer. Author Jon Westfall is an expert in mobile devices, recognized by Microsoft as a "Most Valuable Professional" with experience

  5. [Open window thoracostomy and muscle flap transposition for thoracic empyema].

    Science.gov (United States)

    Nakajima, Y

    2010-07-01

    Open window thoracostomy for thoracic empyema: Open window thoracostomy is a simple, certain and final drainage procedure for thoracic empyema. It is most useful to drain purulent effusion from empyema space, especially for cases with broncho-pleural fistulas, and to clean up purulent necrotic debris on surface of empyema sac. For changing of packing gauzes in empyema space through a window once or twice every day after this procedure, thoracostomy will have to be made on the suitable position to empyema space. Usually skin incision will be layed along the costal bone just at the most expanded position of empyema. Following muscle splitting to thoracic wall, a costal bone just under the incision will be removed as 8-10 cm as long, and opened the empyema space through a costal bed. After the extension of empyema space will be preliminarily examined through a primary window by a finger or a long forceps, it will be decided costal bones must be removed how many (usually 2 or 3 totally) and how long (6-8 cm) to make a window up to 5 cm in diameter. Thickened empyema wall will be cut out just according to a window size, and finally skin edge and empyema wall will be sutured roughly along circular edge. Muscle flap transposition for empyema space: Pediclued muscle flap transposition is one of space-reducing operations for (chronic) empyema Usually this will be co-performed with other several procedures as curettages on empyema surface, closure of bronchopleural fistula and thoracoplasty. This is radically curable for primarily non fistulous empyema or secondarily empyema after open window thoracostomy done for fistula. Furthermore this is less invasive than other radical operations as like pleuro-pneumonectomy, decortication or air-plombage for empyema. There are 2 important points to do this technique. One is a volume of muscle flap and another is good blood flow in flap. The former suitable muscle volume is need to impact empyema space or to close fistula, and the

  6. Grab Windows training opportunities; check CERN Windows roadmap!

    CERN Multimedia

    IT Department

    2011-01-01

    CERN Operating Systems and Information Services group (IT-OIS) actively monitors market trends to check how new software products correspond to CERN needs. In the Windows world, Windows 7 has been a big hit, with over 1500 Windows 7 PCs within less than a year since its support was introduced at CERN. No wonder: Windows XP is nearly 10 years old and is steadily approaching the end of its life-cycle. At CERN, support for Windows XP will stop at the end of December 2012. Compared to Vista, Windows 7 has the same basic hardware requirements, but offers higher performance, so the decision to upgrade is rather straightforward. CERN support for Vista will end in June 2011. In the world of Microsoft Office, version 2007 offers better integration with the central services than the older version 2003. Progressive upgrade from 2003 to 2007 is planned to finish in September 2011, but users are encouraged to pro-actively upgrade at their convenience. Please note that Office 2007 brings an important change in the area of ...

  7. High-dynamic-range water window ptychography

    CERN Document Server

    Rose, Max; Senkbeil, Tobias; von Gundlach, Andreas R; Stuhr, Susan; Rumancev, Christoph; Besedin, Ilya; Skopintsev, Petr; Viefhaus, Jens; Rosenhahn, Axel; Vartanyants, Ivan A

    2016-01-01

    Ptychographic imaging with soft X-rays, especially in the water window energy range, suffers from limited detector dynamic range that directly influences the maximum spatial resolution achievable. High-dynamic-range data can be obtained by multiple exposures. By this approach we have increased the dynamic range of a ptychographic data set by a factor of 76 and obtained diffraction signal till the corners of the detector. The real space half period resolution was improved from 50 nm for the single exposure data to 18 nm for the high-dynamic-range data.

  8. Window taper functions for subaperture processing.

    Energy Technology Data Exchange (ETDEWEB)

    Doerry, Armin Walter

    2013-12-01

    It is well known that the spectrum of a signal can be calculated with a Discrete Fourier Transform (DFT), where best resolution is achieved by processing the entire data set. However, in some situations it is advantageous to use a staged approach, where data is first processed within subapertures, and the results are then combined and further processed to a final result. An artifact of this approach is the creation of grating lobes in the final response. The nature of the grating lobes, including their amplitude and spacing, is an artifact of window taper functions, subaperture offsets, and subaperture processing parameters. We assess these factors and exemplify their effects.

  9. Spaces

    Directory of Open Access Journals (Sweden)

    Maziar Nekovee

    2010-01-01

    Full Text Available Cognitive radio is being intensively researched as the enabling technology for license-exempt access to the so-called TV White Spaces (TVWS, large portions of spectrum in the UHF/VHF bands which become available on a geographical basis after digital switchover. Both in the US, and more recently, in the UK the regulators have given conditional endorsement to this new mode of access. This paper reviews the state-of-the-art in technology, regulation, and standardisation of cognitive access to TVWS. It examines the spectrum opportunity and commercial use cases associated with this form of secondary access.

  10. Machinery failure analysis and troubleshooting practical machinery management for process plants

    CERN Document Server

    Bloch, Heinz P

    2012-01-01

    Solve the machinery failure problems costing you time and money with this classic, comprehensive guide to analysis and troubleshooting  Provides detailed, complete and accurate information on anticipating risk of component failure and avoiding equipment downtime Includes numerous photographs of failed parts to ensure you are familiar with the visual evidence you need to recognize Covers proven approaches to failure definition and offers failure identification and analysis methods that can be applied to virtually all problem situations Demonstr

  11. Temperature measurements of a high-power microwave feedhorn window

    Science.gov (United States)

    Hoppe, Daniel J.; Perez, Raul M.; Glazer, Stuart D.

    1990-06-01

    Temperature measurements of a high-power microwave feedhorn window, obtained using an imaging IR radiometer during transmitter operation at 365 kW CW and 8.5 GHz, are discussed. The window under investigation was constructed of HTP-6, a high-thermal-performance material developed to shield the Space Shuttle Orbiter from the heat of reentry. The measurement technique is described, and experimental results are presented. The window performed adequately at 365 kW CW with a center temperature of 475 C. The tests verify that HTP-6 can be used as a window material or a support structure in high-power waveguides at power densities of 1.47 kW/sq cm for extended periods of time, with no change in its mechanical characteristics.

  12. Windows with improved energy performance

    DEFF Research Database (Denmark)

    Noyé, Peter Anders; Laustsen, Jacob Birck; Svendsen, Svend

    2002-01-01

    the paper describes how the net energy gain from a complete typical window can be increased in a fairly simple way by reducing the frame width and using glass with low iron content. The changes primary increase the g-value. All improvements are based on existing technology and manufacturing methods...... performances. During the last 20 years the U-value of the glazing part of windows has been improved considerably, but the frame part has not followed the same development with respect to energy performance. Therefore an increasingly large part of the total heat loss through windows is relating to the frame...... part, for which reason, as far as energy efficiency and total economy are concerned, it has become more interesting to further develop frame structures. Traditionally, the energy performance of windows has primarily been characterised by the heat loss coefficient, U-value. However as the heat loss has...

  13. Industrial Machinery Maintenance and Repair. Florida Vocational Program Guide.

    Science.gov (United States)

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    This vocational program guide is intended to assist in the organization, operation, and evaluation of a program in industrial machinery maintenance and repair in school districts, area vocational centers, and community colleges. The following topics are covered: job duties of millwrights, maintenance mechanics, and machinery erectors; program…

  14. Stepwise evolution of the Sec machinery in Proteobacteria

    NARCIS (Netherlands)

    van der Sluis, EO; Driessen, AJM; Sluis, Eli O. van der

    2006-01-01

    The Sec machinery facilitates the translocation of proteins across and into biological membranes. In several of the Proteobacteria, this machinery contains accessory features that are not present in any other bacterial division. The genomic distribution of these features in the context of bacterial

  15. Recession Hits China’s Textile Machinery Markets

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    China’s textile machinery industry saw a continued decline intotaI profit and a hefty slump in imports and exports in the first twomonths this year.Analysts anticipated a continued weakening ofmomentum for China’s textile machinery markets owing to weakerconsumer spending and easing export growth.

  16. ITALIAN TEXTILE MACHINERY WORKSHOP IN SUZHOU(CHINA)

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The Association of Italian Textile Machinery Manufacturers (ACIMIT)and the Italian Trade Commission(ICE)held a technical workshop on Italian textile machinery for the production of technical textiles and nonwovens in China.The workshop occurred in Suzhou(Juangsu Province),on May 24th-25th,2007.

  17. 46 CFR 282.23 - Hull and machinery insurance.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Hull and machinery insurance. 282.23 Section 282.23... COMMERCE OF THE UNITED STATES Calculation of Subsidy Rates § 282.23 Hull and machinery insurance. (a) Subsidy items. The fair and reasonable net premium costs (including stamp taxes) of hull and...

  18. 46 CFR 111.103-9 - Machinery stop stations.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Machinery stop stations. 111.103-9 Section 111.103-9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Remote Stopping Systems § 111.103-9 Machinery stop stations. (a) Each forced...

  19. Occupational incidents with self-propelled machinery in Austrian agriculture.

    Science.gov (United States)

    Mayrhofer, Hannes; Quendler, Elisabeth; Boxberger, Josef

    2013-01-01

    Tractors, self-propelled harvesting machinery, and material handling machinery are the most commonly used self-propelled machineries in Austrian agriculture, and they have similarities in main accident scenarios. Statistical data of all occupational incidents with these machines reported between 2008 and 2010 were analyzed to obtain information about the circumstances of the incidents, and about the victims and their work environments. Criteria of recognized occupational incidents provided by the Austrian Social Insurance Institution for Farmers were analyzed according to machinery category by means of cross-tabulation and chi-square tests. The results were discussed and evaluated in the context of the literature. The results of the analysis of the databases show that 786 occupational incidents with tractors, self-propelled harvesting machinery, and material handling machinery occurred in Austrian agriculture between 2008 and 2010. There were 231 occupational incidents in 2008; the number rose to 268 in 2009 and to 286 in 2010. A total of 41 incidents were fatal. For the machinery categories analyzed, the majority of injured victims were male, older than 40 years, Austrian citizens, and managers of a mixed-agricultural farm. A large number of the incidents occurred in all machinery categories by loss of control during operating a vehicle.

  20. Evolution and diversification of the basal transcription machinery.

    Science.gov (United States)

    Duttke, Sascha H C

    2015-03-01

    Transcription initiation was once thought to be regulated primarily by sequence-specific transcription factors with the basal transcription machinery being largely invariant. Gradually it became apparent that the basal transcription machinery greatly diversified during evolution and new studies now demonstrate that diversification of the TATA-binding protein (TBP) family yielded specialized and largely independent transcription systems.

  1. A window on urban sustainability

    Energy Technology Data Exchange (ETDEWEB)

    Stigt, Rien van, E-mail: rien.vanstigt@hu.nl [Research Center for Technology and Innovation, Utrecht University of Applied Sciences, P.O. Box 182, 3500 AD Utrecht (Netherlands); Driessen, Peter P.J., E-mail: p.driessen@uu.nl [Copernicus Institute of Sustainable Development, Faculty of Geosciences, Utrecht University, P.O. Box 80.115, 3508 TC Utrecht (Netherlands); Spit, Tejo J.M., E-mail: T.J.M.Spit@uu.nl [Department of Human Geography and Spatial Planning, Faculty of Geosciences, Utrecht University, P.O. Box 80.115, 3508 TC Utrecht (Netherlands)

    2013-09-15

    Sustainable urban development requires the integration of environmental interests in urban planning. Although various methods of environmental assessment have been developed, plan outcomes are often disappointing due to the complex nature of decision-making in urban planning, which takes place in multiple arenas within multiple policy networks involving diverse stakeholders. We argue that the concept of ‘decision windows’ can structure this seemingly chaotic chain of interrelated decisions. First, explicitly considering the dynamics of the decision-making process, we further conceptualized decision windows as moments in an intricate web of substantively connected deliberative processes where issues are reframed within a decision-making arena, and interests may be linked within and across arenas. Adopting this perspective in two case studies, we then explored how decision windows arise, which factors determine their effectiveness and how their occurrence can be influenced so as to arrive at more sustainable solutions. We conclude that the integration of environmental interests in urban planning is highly dependent on the ability of the professionals involved to recognize and manipulate decision windows. Finally, we explore how decision windows may be opened. -- Highlights: • Decision-making about sustainable urban development occurs in networks. • The concept of ‘decision windows’ was further elaborated. • Decision windows help understand how environmental interests enter decision-making. • Decision windows can, to some extent, be influenced.

  2. Ribosome evolution: Emergence of peptide synthesis machinery

    Indian Academy of Sciences (India)

    Koji Tamura

    2011-12-01

    Proteins, the main players in current biological systems, are produced on ribosomes by sequential amide bond (peptide bond) formations between amino-acid-bearing tRNAs. The ribosome is an exquisite super-complex of RNA-proteins, containing more than 50 proteins and at least 3 kinds of RNAs. The combination of a variety of side chains of amino acids (typically 20 kinds with some exceptions) confers proteins with extraordinary structure and functions. The origin of peptide bond formation and the ribosome is crucial to the understanding of life itself. In this article, a possible evolutionary pathway to peptide bond formation machinery (proto-ribosome) will be discussed, with a special focus on the RNA minihelix (primordial form of modern tRNA) as a starting molecule. Combining the present data with recent experimental data, we can infer that the peptidyl transferase center (PTC) evolved from a primitive system in the RNA world comprising tRNA-like molecules formed by duplication of minihelix-like small RNA.

  3. Occupational Accidents with Agricultural Machinery in Austria.

    Science.gov (United States)

    Kogler, Robert; Quendler, Elisabeth; Boxberger, Josef

    2016-01-01

    The number of recognized accidents with fatalities during agricultural and forestry work, despite better technology and coordinated prevention and trainings, is still very high in Austria. The accident scenarios in which people are injured are very different on farms. The common causes of accidents in agriculture and forestry are the loss of control of machine, means of transport or handling equipment, hand-held tool, and object or animal, followed by slipping, stumbling and falling, breakage, bursting, splitting, slipping, fall, and collapse of material agent. In the literature, a number of studies of general (machine- and animal-related accidents) and specific (machine-related accidents) agricultural and forestry accident situations can be found that refer to different databases. From the database Data of the Austrian Workers Compensation Board (AUVA) about occupational accidents with different agricultural machinery over the period 2008-2010 in Austria, main characteristics of the accident, the victim, and the employer as well as variables on causes and circumstances by frequency and contexts of parameters were statistically analyzed by employing the chi-square test and odds ratio. The aim of the study was to determine the information content and quality of the European Statistics on Accidents at Work (ESAW) variables to evaluate safety gaps and risks as well as the accidental man-machine interaction.

  4. Sinusoidal synthesis based adaptive tracking for rotating machinery fault detection

    Science.gov (United States)

    Li, Gang; McDonald, Geoff L.; Zhao, Qing

    2017-01-01

    This paper presents a novel Sinusoidal Synthesis Based Adaptive Tracking (SSBAT) technique for vibration-based rotating machinery fault detection. The proposed SSBAT algorithm is an adaptive time series technique that makes use of both frequency and time domain information of vibration signals. Such information is incorporated in a time varying dynamic model. Signal tracking is then realized by applying adaptive sinusoidal synthesis to the vibration signal. A modified Least-Squares (LS) method is adopted to estimate the model parameters. In addition to tracking, the proposed vibration synthesis model is mainly used as a linear time-varying predictor. The health condition of the rotating machine is monitored by checking the residual between the predicted and measured signal. The SSBAT method takes advantage of the sinusoidal nature of vibration signals and transfers the nonlinear problem into a linear adaptive problem in the time domain based on a state-space realization. It has low computation burden and does not need a priori knowledge of the machine under the no-fault condition which makes the algorithm ideal for on-line fault detection. The method is validated using both numerical simulation and practical application data. Meanwhile, the fault detection results are compared with the commonly adopted autoregressive (AR) and autoregressive Minimum Entropy Deconvolution (ARMED) method to verify the feasibility and performance of the SSBAT method.

  5. The oxidative protein folding machinery in plant cells.

    Science.gov (United States)

    Aller, Isabel; Meyer, Andreas J

    2013-08-01

    Formation of intra-molecular disulfides and concomitant oxidative protein folding is essential for stability and catalytic function of many soluble and membrane-bound proteins in the endomembrane system, the mitochondrial inter-membrane space and the thylakoid lumen. Disulfide generation from free cysteines in nascent polypeptide chains is generally a catalysed process for which distinct pathways exist in all compartments. A high degree of similarities between highly diverse eukaryotic and bacterial systems for generation of protein disulfides indicates functional conservation of key processes throughout evolution. However, while many aspects about molecular function of enzymatic systems promoting disulfide formation have been demonstrated for bacterial and non-plant eukaryotic organisms, it is now clear that the plant machinery for oxidative protein folding displays distinct details, suggesting that the different pathways have been adapted to plant-specific requirements in terms of compartmentation, molecular function and regulation. Here, we aim to evaluate biological diversity by comparing the plant systems for oxidative protein folding to the respective systems from non-plant eukaryotes.

  6. Manifold Learning with Self-Organizing Mapping for Feature Extraction of Nonlinear Faults in Rotating Machinery

    Directory of Open Access Journals (Sweden)

    Lin Liang

    2015-01-01

    Full Text Available A new method for extracting the low-dimensional feature automatically with self-organization mapping manifold is proposed for the detection of rotating mechanical nonlinear faults (such as rubbing, pedestal looseness. Under the phase space reconstructed by single vibration signal, the self-organization mapping (SOM with expectation maximization iteration algorithm is used to divide the local neighborhoods adaptively without manual intervention. After that, the local tangent space alignment algorithm is adopted to compress the high-dimensional phase space into low-dimensional feature space. The proposed method takes advantages of the manifold learning in low-dimensional feature extraction and adaptive neighborhood construction of SOM and can extract intrinsic fault features of interest in two dimensional projection space. To evaluate the performance of the proposed method, the Lorenz system was simulated and rotation machinery with nonlinear faults was obtained for test purposes. Compared with the holospectrum approaches, the results reveal that the proposed method is superior in identifying faults and effective for rotating machinery condition monitoring.

  7. 拥抱Windows 10

    Institute of Scientific and Technical Information of China (English)

    王春海

    2015-01-01

    微软新一代操作系统Windows10已正式发布,新系统统一PC、平板、手机和Xbox等多个平台,在性能、安全性和用户体验方面都有全面提升,并对系统底层、开始菜单、操作中心等做出多项改进,包括更智慧的Cortana语音助理、全新多桌面体验和新的开始选单等。除此之外,Windows10还加强了安全性的设计,Windows10的内核版本直接从Windows8.1的6.4提升到了10.0,操作系统的底层架构和安全特性发生了多项重大变化。在初次使用Windows10的时候,可以看到“手机、平板”的风格到处都是。

  8. Switchable Materials for Smart Windows.

    Science.gov (United States)

    Wang, Yang; Runnerstrom, Evan L; Milliron, Delia J

    2016-06-07

    This article reviews the basic principles of and recent developments in electrochromic, photochromic, and thermochromic materials for applications in smart windows. Compared with current static windows, smart windows can dynamically modulate the transmittance of solar irradiation based on weather conditions and personal preferences, thus simultaneously improving building energy efficiency and indoor human comfort. Although some smart windows are commercially available, their widespread implementation has not yet been realized. Recent advances in nanostructured materials provide new opportunities for next-generation smart window technology owing to their unique structure-property relations. Nanomaterials can provide enhanced coloration efficiency, faster switching kinetics, and longer lifetime. In addition, their compatibility with solution processing enables low-cost and high-throughput fabrication. This review also discusses the importance of dual-band modulation of visible and near-infrared (NIR) light, as nearly 50% of solar energy lies in the NIR region. Some latest results show that solution-processable nanostructured systems can selectively modulate the NIR light without affecting the visible transmittance, thus reducing energy consumption by air conditioning, heating, and artificial lighting.

  9. The pathological consequences of impaired genome integrity in humans; disorders of the DNA replication machinery.

    Science.gov (United States)

    O'Driscoll, Mark

    2017-01-01

    Accurate and efficient replication of the human genome occurs in the context of an array of constitutional barriers, including regional topological constraints imposed by chromatin architecture and processes such as transcription, catenation of the helical polymer and spontaneously generated DNA lesions, including base modifications and strand breaks. DNA replication is fundamentally important for tissue development and homeostasis; differentiation programmes are intimately linked with stem cell division. Unsurprisingly, impairments of the DNA replication machinery can have catastrophic consequences for genome stability and cell division. Functional impacts on DNA replication and genome stability have long been known to play roles in malignant transformation through a variety of complex mechanisms, and significant further insights have been gained from studying model organisms in this context. Congenital hypomorphic defects in components of the DNA replication machinery have been and continue to be identified in humans. These disorders present with a wide range of clinical features. Indeed, in some instances, different mutations in the same gene underlie different clinical presentations. Understanding the origin and molecular basis of these features opens a window onto the range of developmental impacts of suboptimal DNA replication and genome instability in humans. Here, I will briefly overview the basic steps involved in DNA replication and the key concepts that have emerged from this area of research, before switching emphasis to the pathological consequences of defects within the DNA replication network; the human disorders. Copyright © 2016 Pathological Society of Great Britain and Ireland. Published by John Wiley & Sons, Ltd.

  10. Windows Server 2012 R2 administrator cookbook

    CERN Document Server

    Krause, Jordan

    2015-01-01

    This book is intended for system administrators and IT professionals with experience in Windows Server 2008 or Windows Server 2012 environments who are looking to acquire the skills and knowledge necessary to manage and maintain the core infrastructure required for a Windows Server 2012 and Windows Server 2012 R2 environment.

  11. Attentional Window Set by Expected Relevance of Environmental Signals

    NARCIS (Netherlands)

    van Beilen, Marije; Renken, Remco; Groenewold, Erik S.; Cornelissen, Frans W.

    2011-01-01

    The existence of an attentional window-a limited region in visual space at which attention is directed-has been invoked to explain why sudden visual onsets may or may not capture overt or covert attention. Here, we test the hypothesis that observers voluntarily control the size of this attentional

  12. New machining method of high precision infrared window part

    Science.gov (United States)

    Yang, Haicheng; Su, Ying; Xu, Zengqi; Guo, Rui; Li, Wenting; Zhang, Feng; Liu, Xuanmin

    2016-10-01

    Most of the spherical shell of the photoelectric multifunctional instrument was designed as multi optical channel mode to adapt to the different band of the sensor, there were mainly TV, laser and infrared channels. Without affecting the optical diameter, wind resistance and pneumatic performance of the optical system, the overall layout of the spherical shell was optimized to save space and reduce weight. Most of the shape of the optical windows were special-shaped, each optical window directly participated in the high resolution imaging of the corresponding sensor system, and the optical axis parallelism of each sensor needed to meet the accuracy requirement of 0.05mrad.Therefore precision machining of optical window parts quality will directly affect the photoelectric system's pointing accuracy and interchangeability. Processing and testing of the TV and laser window had been very mature, while because of the special nature of the material, transparent and high refractive rate, infrared window parts had the problems of imaging quality and the control of the minimum focal length and second level parallel in the processing. Based on years of practical experience, this paper was focused on how to control the shape and parallel difference precision of infrared window parts in the processing. Single pass rate was increased from 40% to more than 95%, the processing efficiency was significantly enhanced, an effective solution to the bottleneck problem in the actual processing, which effectively solve the bottlenecks in research and production.

  13. Attentional window set by expected relevance of environmental signals.

    Directory of Open Access Journals (Sweden)

    Marije van Beilen

    Full Text Available The existence of an attentional window--a limited region in visual space at which attention is directed--has been invoked to explain why sudden visual onsets may or may not capture overt or covert attention. Here, we test the hypothesis that observers voluntarily control the size of this attentional window to regulate whether or not environmental signals can capture attention. We have used a novel approach to test this: participants eye-movements were tracked while they performed a search task that required dynamic gaze-shifts. During the search task, abrupt onsets were presented that cued the target positions at different levels of congruency. The participant knew these levels. We determined oculomotor capture efficiency for onsets that appeared at different viewing eccentricities. From these, we could derive the participant's attentional window size as a function of onset congruency. We find that the window was small during the presentation of low-congruency onsets, but increased monotonically in size with an increase in the expected congruency of the onsets. This indicates that the attentional window is under voluntary control and is set according to the expected relevance of environmental signals for the observer's momentary behavioral goals. Moreover, our approach provides a new and exciting method to directly measure the size of the attentional window.

  14. Multi-scale window specification over streaming trajectories

    Directory of Open Access Journals (Sweden)

    Kostas Patroumpas

    2013-12-01

    Full Text Available Enormous amounts of positional information are collected by monitoring applications in domains such as fleet management, cargo transport, wildlife protection, etc. With the advent of modern location-based services, processing such data mostly focuses on providing real-time response to a variety of user requests in continuous and scalable fashion. An important class of such queries concerns evolving trajectories that continuously trace the streaming locations of moving objects, like GPS-equipped vehicles, commodities with RFID's, people with smartphones etc. In this work, we propose an advanced windowing operator that enables online, incremental examination of recent motion paths at multiple resolutions for numerous point entities. When applied against incoming positions, this window can abstract trajectories at coarser representations towards the past, while retaining progressively finer features closer to the present. We explain the semantics of such multi-scale sliding windows through parameterized functions that reflect the sequential nature of trajectories and can effectively capture their spatiotemporal properties. Such window specification goes beyond its usual role for non-blocking processing of multiple concurrent queries. Actually, it can offer concrete subsequences from each trajectory, thus preserving continuity in time and contiguity in space along the respective segments. Further, we suggest language extensions in order to express characteristic spatiotemporal queries using windows. Finally, we discuss algorithms for nested maintenance of multi-scale windows and evaluate their efficiency against streaming positional data, offering empirical evidence of their benefits to online trajectory processing.

  15. China's Textile Machinery Industry:Where to Go?

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    China's textile machinery especially cotton-spinning machinery, after several decades of development, has been relatively mature and closer to the foreign advanced level day by day; however, there are still many problems. Since China's entry into WTO, domestic textile enterprises have seized this excellent opportunity to obtain fast development and progress. Currently, accelerating the pace of technological innovation for the development of series of products, vigorously implementing the export strategy to seek new ways for technical upgrade, and exploring the new R&D mode for China's textile machinery are hanging over the enterprises' heads.

  16. Safe design and construction of machinery regulation, practice and performance

    CERN Document Server

    Bluff, Elizabeth

    2015-01-01

    The origin of this book is the compelling evidence that a high proportion of machinery-related deaths and injuries are attributable to genuine and serious risks originating within machine design and construction. This trend continues despite significant legal obligations, notably the European regulatory regime giving effect to the Machinery Directive (among others), and a substantial body of specialist knowledge originating in the disciplines of human factors and safety engineering. Grounded in empirical research with machinery manufacturers, this book aims to elucidate the factors and process

  17. Development and improvement: Status of Textile Machinery Manufacturing in China

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The past over 20 years of reform & open-door practices has witnessed an amazingly rapid development in China’s textile machinery manufacturing.1. The change in the production scale: the number oftextile machinery manufacturers grew from over 150 plants listed exceptionally in the category of textile industrial system in the old traditional planned economy to the over 500 plants that come from all sectors of industries engaged in textile machinery manufacturing in the new socialist market-driven economy. The production output value grew from 870 million RMB(Chinese Yuan) in 1987 to 14.7 billion RMB, 18

  18. The ESCRT machinery: new roles at new holes.

    Science.gov (United States)

    Olmos, Y; Carlton, J G

    2016-02-01

    The ESCRT machinery drives a diverse collection of membrane remodeling events, including multivesicular body biogenesis, release of enveloped retroviruses and both reformation of the nuclear envelope and cytokinetic abscission during mitotic exit. These events share the requirement for a topologically equivalent membrane remodeling for their completion and the cells deployment of the ESCRT machinery in these different contexts highlights its functionality as a transposable membrane-fission machinery. Here, we will examine recent data describing ESCRT-III dependent membrane remodeling and explore new roles for the ESCRT-III complex at the nuclear envelope.

  19. Teach yourself visually Windows 8

    CERN Document Server

    McFedries, Paul

    2012-01-01

    A practical guide for visual learners eager to get started with Windows 8 If you learn more quickly when you can see how things are done, this Visual guide is the easiest way to get up and running on Windows 8. It covers more than 150 essential Windows tasks, using full-color screen shots and step-by-step instructions to show you just what to do. Learn your way around the interface and how to install programs, set up user accounts, play music and other media files, download photos from your digital camera, go online, set up and secure an e-mail account, and much more. The tried-and-true format

  20. Windows Server 2012 : Uudet ominaisuudet ja muutokset

    OpenAIRE

    2013-01-01

    Tämän opintyön tarkoituksena on valottaa Windows Server 2012 -käyttöjärjestelmän muutoksia verrattuna vanhaan Windows Server 2008 R2 -versioon. Työ aloitettiin ennen Windows Server 2012 -julkaisua Release Candidate -version testauksella ja myöhemmin julkaisun jälkeen Windows Serverin kokeiluversiolla. Työssä on silti ajankohtaista tietoa Windows Server 2012:sta. Aluksi käsitellään Windows Servereiden kehityskaarta lyhyesti ja käsitellään uusinta Windows Serveriä tuotteena se...

  1. Windows 7 is supported at CERN

    CERN Multimedia

    IT Department

    2010-01-01

    The new version of the Windows operating system - Windows 7 - is now officially supported at CERN. Windows 7 32-bit is now the default operating system for the new computers at CERN. What’s new in Windows 7 Users of Windows XP will find many new features and options. Users of Windows Vista will feel very familiar with one major difference: higher performance and better responsiveness of the operating system. Other enhancements include: refined Aero desktop that makes it easier to navigate between your different application windows; new snapping windows that allows user to resize a window simply by dragging it to the edge of the screen and “pin” that allows grouping and arranging often accessed applications on the taskbar. Windows 7 introduces the new concept of libraries – containers for user files that have links to different local or network folders. By default, users can see four libraries: Documents, Music, Pictures and Videos. These libraries point to the cor...

  2. Windows 7 Server名称之谜

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    按理说,Windows 7 Server 也算得上是一款新系统,为何不见其介绍呢?其实“Windows 7 Server”只是我们这些Windows拥戴者给它的命名,微软在研发Windows7的服务器版本时,并没有用“Windows 7 Server”作为开发代号,而是命名为“Windows Server 2008 R2”,这表示Windows7的服务器版本并不像是从Windows 2000 Server到Windows Server 2003式的重大产品升级,只是对现有Windows Server2008的一次更新,或者说是Windows Seryer 2008的增强版。

  3. Thermal bridges of modern windows

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place; Møller, Eva B.; Nielsen, Anker

    2013-01-01

    With its focus on reduced energy consumption, contemporary housing construction requires a highly insulated and airtight building envelope with as few thermal bridges as possible.Windows must be carefully designed, as thermal bridges can lead to surface condensation or mold growth, even if the wi......With its focus on reduced energy consumption, contemporary housing construction requires a highly insulated and airtight building envelope with as few thermal bridges as possible.Windows must be carefully designed, as thermal bridges can lead to surface condensation or mold growth, even...

  4. Windows Vista Administrator's Pocket Guide

    CERN Document Server

    Stanek, William R

    2007-01-01

    Portable and precise, this pocket-sized guide delivers immediate answers for the day-to-day administration of Windows Vista. Zero in on core support and maintenance tasks using quick-reference tables, instructions, and lists. You'll get the precise information you need to solve problems and get the job done-whether you're at your desk or in the field! Get fast facts to: Install and configure Windows Vista-and optimize the user workspaceMaintain operating system components, hardware devices, and driversCreate user and group accounts-and control rights and permissionsAdminister group policy se

  5. *New* CRITICAL Windows Security patch

    CERN Multimedia

    2003-01-01

    On 10 September 2003, Microsoft issued a new CRITICAL security patch, MS03-039. It must be URGENTLY applied on ALL WINDOWS systems, which are not centrally managed for security patches. This includes Experiment computers, Home computers and Windows Portable and Desktop systems not running NICE. Details of the security hole and patch for MS03-039 (which also includes MS03-026) are at: http://cern.ch/it-div/news/hotfix-MS03-039.asp http://www.microsoft.com/technet/security/bulletin/MS03-039.asp

  6. *New*: CRITICAL Windows Security patch

    CERN Multimedia

    2003-01-01

    On 10 September 2003, Microsoft issued a new CRITICAL security patch, MS03-039. It must be URGENTLY applied on ALL WINDOWS systems, which are not centrally managed for security patches. This includes Experiment computers, Home computers and Windows Portable and Desktop systems not running NICE. Details of the security hole and patch for MS03-039 (which also includes MS03-026) are at: http://cern.ch/it-div/news/hotfix-MS03-039.asp http://www.microsoft.com/technet/security/bulletin/MS03-039.asp

  7. Experimental study of plasma window

    CERN Document Server

    Ben-Liang, Shi; Kun, Zhu; Yuan-Rong, Lu

    2013-01-01

    Plasma window is an advanced apparatus which can work as the interface between vacuum and high pressure region. It can be used in many applications which need atmosphere-vacuum interface, such as gas target, electron beam welding, synchrotron radiation and spallation neutron source. A test bench of plasma window is constructed in Peking University. A series of experiments and corresponding parameter measurements have been presented in this article. The experiment result indicates the feasibility of such a facility acting as an interface between vacuum and high pressure region.

  8. Microsoft Windows Server Administration Essentials

    CERN Document Server

    Carpenter, Tom

    2011-01-01

    The core concepts and technologies you need to administer a Windows Server OS Administering a Windows operating system (OS) can be a difficult topic to grasp, particularly if you are new to the field of IT. This full-color resource serves as an approachable introduction to understanding how to install a server, the various roles of a server, and how server performance and maintenance impacts a network. With a special focus placed on the new Microsoft Technology Associate (MTA) certificate, the straightforward, easy-to-understand tone is ideal for anyone new to computer administration looking t

  9. Windows with improved energy performance

    DEFF Research Database (Denmark)

    Noyé, Peter Anders; Laustsen, Jacob Birck; Svendsen, Svend

    2002-01-01

    the paper describes how the net energy gain from a complete typical window can be increased in a fairly simple way by reducing the frame width and using glass with low iron content. The changes primary increase the g-value. All improvements are based on existing technology and manufacturing methods...... part, for which reason, as far as energy efficiency and total economy are concerned, it has become more interesting to further develop frame structures. Traditionally, the energy performance of windows has primarily been characterised by the heat loss coefficient, U-value. However as the heat loss has...

  10. Alleviating the window problem in large volume renormalization schemes

    OpenAIRE

    Korcyl, Piotr

    2017-01-01

    We propose a strategy for large volume non-perturbative renormalization which alleviates the window problem by reducing cut-off effects. We perform a proof-of-concept study using position space renormalization scheme and the CLS $N_f=2+1$ ensembles generated at 5 different lattice spacings. We show that in the advocated strategy results for the renormalization constants are to a large extend independent of the specific lattice direction used to define the renormalization condition. Hence, ver...

  11. White-Paper Report: Textile Machinery Industry (2005-2009) Economic Performance in Chinese Textile Machinery Industry

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ Internal Impacts on Textile Machinery Sector 1.Industrial Scale Like many other industrial sectors,the textile machinery industry was also affected by global financial crisis that led to credit crunch in the important markets where consumers'spending plummeted.The textile machinery manufacturers ran into a lot of problems in the balance sheets when international markets were structured in a way that is different from domestic market in terms of consumers'demand.It is very hard for these manufacturers to gain some market share simply by shifting their export-oriented products to local clients in hope to overcome difficulties.

  12. ShanghaiTex 2011,Textile Machinery Giants Gather in China

    Institute of Scientific and Technical Information of China (English)

    Wang Ting

    2011-01-01

    "Over 1000 exhibitions from 18 countries and regions,taking an exhibition area of 92000 square meters wide,ShanghaiTex 2011 unveiled the textile machinery industrial exhibition shows in the city of Shanghai this June.

  13. The kinematics of machinery outlines of a theory of machines

    CERN Document Server

    Reuleaux, Franz

    2012-01-01

    A classic on the kinematics of machinery, this volume was written by the Father of Kinematics. Reuleaux writes with authority and precision, developing the subject from its fundamentals. 450 figures. 1876 edition.

  14. Open innovation and supply chain management in food machinery ...

    African Journals Online (AJOL)

    user

    companies are thus building strong supply chain partnerships with business .... Focusing on studies referring to food and food machinery fields, Sarkar and Costa (2008) reviews three examples of open ...... Harvard Business Review, Vol. 80,.

  15. Therapeutic interventions to disrupt the protein synthetic machinery in melanoma.

    Science.gov (United States)

    Kardos, Gregory R; Robertson, Gavin P

    2015-09-01

    Control of the protein synthetic machinery is deregulated in many cancers, including melanoma, to increase the protein production. Tumor suppressors and oncogenes play key roles in protein synthesis from the transcription of rRNA and ribosome biogenesis to mRNA translation initiation and protein synthesis. Major signaling pathways are altered in melanoma to modulate the protein synthetic machinery, thereby promoting tumor development. However, despite the importance of this process in melanoma development, involvement of the protein synthetic machinery in this cancer type is an underdeveloped area of study. Here, we review the coupling of melanoma development to deregulation of the protein synthetic machinery. We examine existing knowledge regarding RNA polymerase I inhibition and mRNA translation focusing on their inhibition for therapeutic applications in melanoma. Furthermore, the contribution of amino acid biosynthesis and involvement of ribosomal proteins are also reviewed as future therapeutic strategies to target deregulated protein production in melanoma.

  16. Recent Advances in Precision Machinery and Manufacturing Technology

    DEFF Research Database (Denmark)

    Liu, Chien-Hung; Hsieh, Wen-Hsiang; Chang, Zong-Yu

    2014-01-01

    Precision machinery and manufacturing technology are be- coming more important in current and future technologies. New knowledge in this field will aid in the advancement of various technologies that are needed to gain industrial competitiveness. To this end, the special issue aims to disseminate...... manufacturing systems, sensors and materials, CAD/CAM/CAE for precision machinery, computation/numerical method, intelligent system and ap- proach, vibration engineering, mechanism design, and fluid- dynamics/thermodynamics....

  17. Designing a Machinery Control System (MCS) Security Testbed

    Science.gov (United States)

    2014-09-01

    smart carrier machinery control system SCADA supervisory control and data acquisition SPST single pole single throw TF functional test TE exception...in Supervisory Control and Data Acquisition ( SCADA ) systems, industrial control systems (ICS’s) and machinery control systems (MCS’s). Today’s modern...for newly discovered security flaws. The concern over vulnerabilities in SCADA systems is due to the equipment they control and their impact, as an

  18. A Study of Sugarcane Leaf-Removal Machinery during Harvest

    OpenAIRE

    2010-01-01

    Problem statement: Sugarcane leaf-removing tools could help speed up sugarcane harvest and reduce contamination. Moreover, leaf-removal machinery can solve the problems of sugarcane burning and workers can increase sugarcane harvest production too. The purpose of this research was to study the use of leaf-removal machinery in the post-harvest production of sugarcane to reduce harvest production time and contaminant. Approach: This study focused on the LK92-11 variety of sugarcane having a har...

  19. Exceptional and Spinorial Conformal Windows

    DEFF Research Database (Denmark)

    Mojaza, Matin; Pica, Claudio; Ryttov, Thomas

    2012-01-01

    We study the conformal window of gauge theories containing fermionic matter fields, where the gauge group is any of the exceptional groups with the fermions transforming according to the fundamental and adjoint representations and the orthogonal groups where the fermions transform according...

  20. Vibration Sensor Data Denoising Using a Time-Frequency Manifold for Machinery Fault Diagnosis

    Directory of Open Access Journals (Sweden)

    Qingbo He

    2013-12-01

    Full Text Available Vibration sensor data from a mechanical system are often associated with important measurement information useful for machinery fault diagnosis. However, in practice the existence of background noise makes it difficult to identify the fault signature from the sensing data. This paper introduces the time-frequency manifold (TFM concept into sensor data denoising and proposes a novel denoising method for reliable machinery fault diagnosis. The TFM signature reflects the intrinsic time-frequency structure of a non-stationary signal. The proposed method intends to realize data denoising by synthesizing the TFM using time-frequency synthesis and phase space reconstruction (PSR synthesis. Due to the merits of the TFM in noise suppression and resolution enhancement, the denoised signal would have satisfactory denoising effects, as well as inherent time-frequency structure keeping. Moreover, this paper presents a clustering-based statistical parameter to evaluate the proposed method, and also presents a new diagnostic approach, called frequency probability time series (FPTS spectral analysis, to show its effectiveness in fault diagnosis. The proposed TFM-based data denoising method has been employed to deal with a set of vibration sensor data from defective bearings, and the results verify that for machinery fault diagnosis the method is superior to two traditional denoising methods.

  1. Vibration sensor data denoising using a time-frequency manifold for machinery fault diagnosis.

    Science.gov (United States)

    He, Qingbo; Wang, Xiangxiang; Zhou, Qiang

    2013-12-27

    Vibration sensor data from a mechanical system are often associated with important measurement information useful for machinery fault diagnosis. However, in practice the existence of background noise makes it difficult to identify the fault signature from the sensing data. This paper introduces the time-frequency manifold (TFM) concept into sensor data denoising and proposes a novel denoising method for reliable machinery fault diagnosis. The TFM signature reflects the intrinsic time-frequency structure of a non-stationary signal. The proposed method intends to realize data denoising by synthesizing the TFM using time-frequency synthesis and phase space reconstruction (PSR) synthesis. Due to the merits of the TFM in noise suppression and resolution enhancement, the denoised signal would have satisfactory denoising effects, as well as inherent time-frequency structure keeping. Moreover, this paper presents a clustering-based statistical parameter to evaluate the proposed method, and also presents a new diagnostic approach, called frequency probability time series (FPTS) spectral analysis, to show its effectiveness in fault diagnosis. The proposed TFM-based data denoising method has been employed to deal with a set of vibration sensor data from defective bearings, and the results verify that for machinery fault diagnosis the method is superior to two traditional denoising methods.

  2. Thin film electrochromic materials for energy efficient windows

    Science.gov (United States)

    Lampert, C. M.

    1980-10-01

    By use of electrochromic thin films, it is possible electronically to control transmission or reflection properties of a window, thus allowing it to be optically and thermally managed, thereby reducing space heating and cooling load. The properties of transition metal oxides, such as WO3, MoO3, Ir2O3, and V2O5 are detailed. Organic systems such as Heptyl Viologen, Polytungsten anion are reviewed. Also, intercalated structures are discussed. The designs of working devices are outlined. From this quantification, materials, devices, and appropriate deposition technology are selected for window applications.

  3. Lempel-Ziv Compression in a Sliding Window

    DEFF Research Database (Denmark)

    Bille, Philip; Cording, Patrick Hagge; Fischer, Johannes

    2017-01-01

    We present new algorithms for the sliding window Lempel-Ziv (LZ77) problem and the approximate rightmost LZ77 parsing problem. Our main result is a new and surprisingly simple algorithm that computes the sliding window LZ77 parse in O(w) space and either O(n) expected time or O(n log log w + z log...... logσ) deterministic time. Here, w is the window size, n is the size of the input string, z is the number of phrases in the parse, and σ is the size of the alphabet. This matches the space and time bounds of previous results while removing constant size restrictions on the alphabet size. To achieve our...... result, we combine a simple modification and augmentation of the suffix tree with periodicity properties of sliding windows. We also apply this new technique to obtain an algorithm for the approximate rightmost LZ77 problem that uses O(n(log z + loglogn)) time and O(n) space and produces a (1 + ϵ...

  4. Energy Gaining Windows for Residental Buildings

    DEFF Research Database (Denmark)

    Kragh, Jesper; Laustsen, Jacob Birck; Svendsen, Svend

    2008-01-01

    windows have already been developed and prototypes constructed for laboratory test and a third generation of the window design is now in the developing and designing face in a new project. The first window constructed was made of wood profiles and a low-energy double glazing unit. The second and third......This paper presents some of the research done during the last 8 years at the Technical University of Denmark developing improved low-energy window solutions. The focus has been on maximizing the net energy gain of windows for residential buildings. The net energy gain of windows is the solar gain...

  5. Forensic Analysis of Windows Registry Against Intrusion

    Directory of Open Access Journals (Sweden)

    Haoyang Xie

    2012-03-01

    Full Text Available Windows Registry forensics is an important branch of computer and network forensics. Windows Registry is often considered as the heart of Windows Operating Systems because it contains allof the configuration setting of specific users, groups, hardware, software, and networks. Therefore, Windows Registry can be viewed as a gold mine of forensic evidences which could be used in courts. This paper introduces the basics of Windows Registry, describes its structure and its keys and subkeys thathave forensic values. This paper also discusses how the Windows Registry forensic keys can be applied in intrusion detection.

  6. Windows 8 and Office 2013 for dummies

    CERN Document Server

    Rathbone, Andy

    2013-01-01

    Learn to: Navigate the Windows 8 Start screenCreate user accounts and set passwordsUse Word, Excel®, PowerPoint®, and Outlook® Master the basics of Windows 8 and Office 2013! Windows and Office work together to turn your PC into a productivity tool. The unique Windows 8 interface combines with updates to Office 2013 to create a new computing experience. This book offers quick answers for when you get stuck. Learn your way around the Windows 8 Start screen and Charms bar as well as Office 2013 applications.The new Windows - see how to laun

  7. Thin film electrochromic materials for energy efficient windows

    Energy Technology Data Exchange (ETDEWEB)

    Lampert, C.M.

    1980-10-01

    Numerous inorganic and organic electrochromic materials are discussed in the context of developing a thin film energy efficient window. By use of electrochromic thin films, it is possible electronically to control transmission or reflection properties of a window, thus allowing it to be optically and thermally managed, thereby reducing space heating and cooling load. The properties of transition metal oxides, such as WO/sub 3/, MoO/sub 3/, Ir/sub 2/O/sub 3/, and V/sub 2/O/sub 5/ are detailed. Organic systems such as Heptyl Viologen, Polytungsten anion are reviewed. Also, intercalated structures are discussed. The designs of working devices are outlined. From this quantification, materials, devices, and appropriate deposition technology are selected for window applications.

  8. Electrochromic materials and devices for energy efficient windows

    Energy Technology Data Exchange (ETDEWEB)

    Lampert, C.M.

    1984-10-01

    Numerous inorganic and organic electrochromic materials are discussed in the context of developing a film-based optical shutter for a window application. It is possible electronically to alter a window's transmission and reflection properties by use of electrochromic thin films. This allows regulation of conductive and radiative heat transfer rates, with variable optical attenuation. As a result, an aperture can be optically and thermally managed, reducing space heating and cooling loads. The properties of transition metal oxides are detailed. Organic systems such as heptyl viologen and polytungsten anion are reviewed. Also, intercalated structures are discussed. Various designs of working devices are outlined with emphasis on solid-state configurations. From this quantification, materials and devices with appropriate deposition techniques for window applications are detailed.

  9. Determination of finite-difference weights using scaled binomial windows

    KAUST Repository

    Chu, Chunlei

    2012-05-01

    The finite-difference method evaluates a derivative through a weighted summation of function values from neighboring grid nodes. Conventional finite-difference weights can be calculated either from Taylor series expansions or by Lagrange interpolation polynomials. The finite-difference method can be interpreted as a truncated convolutional counterpart of the pseudospectral method in the space domain. For this reason, we also can derive finite-difference operators by truncating the convolution series of the pseudospectral method. Various truncation windows can be employed for this purpose and they result in finite-difference operators with different dispersion properties. We found that there exists two families of scaled binomial windows that can be used to derive conventional finite-difference operators analytically. With a minor change, these scaled binomial windows can also be used to derive optimized finite-difference operators with enhanced dispersion properties. © 2012 Society of Exploration Geophysicists.

  10. Predicting Electrochromic Smart Window Performance

    Energy Technology Data Exchange (ETDEWEB)

    Degerman Engfeldt, Johnny

    2012-07-01

    The building sector is one of the largest consumers of energy, where the cooling of buildings accounts for a large portion of the total energy consumption. Electrochromic (EC) smart windows have a great potential for increasing indoor comfort and saving large amounts of energy for buildings. An EC device can be viewed as a thin-film electrical battery whose charging state is manifested in optical absorption, i.e. the optical absorption increases with increased state-of-charge (SOC) and decreases with decreased state-of-charge. It is the EC technology's unique ability to control the absorption (transmittance) of solar energy and visible light in windows with small energy effort that can reduce buildings' cooling needs. Today, the EC technology is used to produce small windows and car rearview mirrors, and to reach the construction market it is crucial to be able to produce large area EC devices with satisfactory performance. A challenge with up-scaling is to design the EC device system with a rapid and uniform coloration (charging) and bleaching (discharging). In addition, up-scaling the EC technology is a large economic risk due to its expensive production equipment, thus making the choice of EC material and system extremely critical. Although this is a well-known issue, little work has been done to address and solve these problems. This thesis introduces a cost-efficient methodology, validated with experimental data, capable of predicting and optimizing EC device systems' performance in large area applications, such as EC smart windows. This methodology consists of an experimental set-up, experimental procedures and a two dimensional current distribution model. The experimental set-up, based on camera vision, is used in performing experimental procedures to develop and validate the model and methodology. The two-dimensional current distribution model takes secondary current distribution with charge transfer resistance, ohmic and time

  11. The actomyosin machinery is required for Drosophila retinal lumen formation.

    Science.gov (United States)

    Nie, Jing; Mahato, Simpla; Zelhof, Andrew C

    2014-09-01

    Multicellular tubes consist of polarized cells wrapped around a central lumen and are essential structures underlying many developmental and physiological functions. In Drosophila compound eyes, each ommatidium forms a luminal matrix, the inter-rhabdomeral space, to shape and separate the key phototransduction organelles, the rhabdomeres, for proper visual perception. In an enhancer screen to define mechanisms of retina lumen formation, we identified Actin5C as a key molecule. Our results demonstrate that the disruption of lumen formation upon the reduction of Actin5C is not linked to any discernible defect in microvillus formation, the rhabdomere terminal web (RTW), or the overall morphogenesis and basal extension of the rhabdomere. Second, the failure of proper lumen formation is not the result of previously identified processes of retinal lumen formation: Prominin localization, expansion of the apical membrane, or secretion of the luminal matrix. Rather, the phenotype observed with Actin5C is phenocopied upon the decrease of the individual components of non-muscle myosin II (MyoII) and its upstream activators. In photoreceptor cells MyoII localizes to the base of the rhabdomeres, overlapping with the actin filaments of the RTW. Consistent with the well-established roll of actomyosin-mediated cellular contraction, reduction of MyoII results in reduced distance between apical membranes as measured by a decrease in lumen diameter. Together, our results indicate the actomyosin machinery coordinates with the localization of apical membrane components and the secretion of an extracellular matrix to overcome apical membrane adhesion to initiate and expand the retinal lumen.

  12. Managing coherence via put/get windows

    Science.gov (United States)

    Blumrich, Matthias A [Ridgefield, CT; Chen, Dong [Croton on Hudson, NY; Coteus, Paul W [Yorktown Heights, NY; Gara, Alan G [Mount Kisco, NY; Giampapa, Mark E [Irvington, NY; Heidelberger, Philip [Cortlandt Manor, NY; Hoenicke, Dirk [Ossining, NY; Ohmacht, Martin [Yorktown Heights, NY

    2012-02-21

    A method and apparatus for managing coherence between two processors of a two processor node of a multi-processor computer system. Generally the present invention relates to a software algorithm that simplifies and significantly speeds the management of cache coherence in a message passing parallel computer, and to hardware apparatus that assists this cache coherence algorithm. The software algorithm uses the opening and closing of put/get windows to coordinate the activated required to achieve cache coherence. The hardware apparatus may be an extension to the hardware address decode, that creates, in the physical memory address space of the node, an area of virtual memory that (a) does not actually exist, and (b) is therefore able to respond instantly to read and write requests from the processing elements.

  13. Managing coherence via put/get windows

    Energy Technology Data Exchange (ETDEWEB)

    Blumrich, Matthias A. (Ridgefield, CT); Chen, Dong (Croton on Hudson, NY); Coteus, Paul W. (Yorktown Heights, NY); Gara, Alan G. (Mount Kisco, NY); Giampapa, Mark E. (Irvington, NY); Heidelberger, Philip (Cortlandt Manor, NY); Hoenicke, Dirk (Ossining, NY); Ohmacht, Martin (Yorktown Heights, NY)

    2011-01-11

    A method and apparatus for managing coherence between two processors of a two processor node of a multi-processor computer system. Generally the present invention relates to a software algorithm that simplifies and significantly speeds the management of cache coherence in a message passing parallel computer, and to hardware apparatus that assists this cache coherence algorithm. The software algorithm uses the opening and closing of put/get windows to coordinate the activated required to achieve cache coherence. The hardware apparatus may be an extension to the hardware address decode, that creates, in the physical memory address space of the node, an area of virtual memory that (a) does not actually exist, and (b) is therefore able to respond instantly to read and write requests from the processing elements.

  14. 30 CFR 75.1725 - Machinery and equipment; operation and maintenance.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Machinery and equipment; operation and....1725 Machinery and equipment; operation and maintenance. (a) Mobile and stationary machinery and equipment shall be maintained in safe operating condition and machinery or equipment in unsafe...

  15. 46 CFR 91.15-1 - Standards in inspection of hulls, boilers, and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Standards in inspection of hulls, boilers, and machinery... hulls, boilers, and machinery. In the inspection of hulls, boilers, and machinery of vessels, the..., respecting material and inspection of hulls, boilers, and machinery, and the certificate of...

  16. 46 CFR 189.15-1 - Standards in inspection of hulls, boilers, and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Standards in inspection of hulls, boilers, and machinery... inspection of hulls, boilers, and machinery. In the inspection of hulls, boilers, and machinery of vessels... chapter, respecting material and construction of hulls, boilers, and machinery, and certificate...

  17. 46 CFR 71.15-1 - Standards in inspection of hulls, boilers, and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Standards in inspection of hulls, boilers, and machinery..., boilers, and machinery. In the inspection of hulls, boilers, and machinery of vessels, the standards... and inspection of hulls, boilers, and machinery, and the certificate of classification...

  18. *NEW* CRITICAL Windows Security patches

    CERN Multimedia

    2003-01-01

    On 3 October and 10 September 2003, Microsoft issued new CRITICAL security patches MS03-040 and MS03-039. They must be URGENTLY applied on ALL WINDOWS systems, which are not centrally managed for security patches. This includes Experiment computers, Home computers and Windows Portable and Desktop systems not running NICE. Details of the security holes and patches are at: MS03-039: http://cern.ch/it-div/news/hotfix-MS03-039.asp http://www.microsoft.com/technet/security/bulletin/MS03-039.asp MS03-040: http://cern.ch/it-div/news/hotfix-MS03-040.asp http://www.microsoft.com/technet/security/bulletin/MS03-040.asp

  19. Electrochromic windows - Applications for aircraft

    Science.gov (United States)

    Harris, Caroline S.; Greenberg, Charles B.

    1989-04-01

    A transparent, solid-state, electrochromic device is described. It demonstrates deep switching in the near infrared and visible spectral regions and good room temperature cycling stability. The response appears reasonably uniform over a 14 cm x 28 cm area, which gives hope for achieving large parts for cockpit and cabin windows. The reversible darkening of the transparency, controlled by an applied voltage or current, has potential application in aircraft to reduce glare and solar heat load to pilots and passengers. The active material in the device is a thin tungsten oxide film which is incorporated into a complex, multilayered structure, essentially that of a transparent battery. The performance of the window is discussed in terms of its configuration, its similarities with commercial batteries and issues critical to aircraft.

  20. A Window of Chinese Folklore

    Institute of Scientific and Technical Information of China (English)

    1993-01-01

    PRESENI-DAY Chinese folk-lore is a window throughwhich one can see Chineseculture;one can see contemporarylife,but mostly one views traditional folk culture.China’s 5,000 years ofhistory,civilization,vast lands and national background have brought afascinating variety of local customsto China’s 56 nationalities.The fol-lowing is a brief introduction to their religious beliefs,sacrificial ritesand festive gatherings.

  1. Windows Memory Forensic Data Visualization

    Science.gov (United States)

    2014-06-12

    captures from Windows machines and the methodology for extracting digital artifacts from forensic memory captures. The two types of malware implemented on...proposed to improve upon the design implemented in the D3 JavaScript Visualization Tool. 7 II. Literature Review Due to the recent rise...18. Resource Slice Selected – Associated Process Nodes Highlighted. ... vice\\Nam~~~~~~~~ffi~~ iFr ~)~~~ ... vice\\NamedPipe\

  2. Exceptional and Spinorial Conformal Windows

    CERN Document Server

    Mojaza, Matin; Ryttov, Thomas A; Sannino, Francesco

    2012-01-01

    We study the conformal window of gauge theories containing fermionic matter fields, where the gauge group is any of the exceptional groups with the fermions transforming according to the fundamental and adjoint representations and the orthogonal groups where the fermions transform according to a spinorial representation. We investigate the phase diagram using a purely perturbative four loop analysis, the all-orders beta function and the ladder approximation.

  3. Electrochromic Windows: Advanced Processing Technology

    Energy Technology Data Exchange (ETDEWEB)

    SAGE Electrochromics, Inc

    2006-12-13

    This project addresses the development of advanced fabrication capabilities for energy saving electrochromic (EC) windows. SAGE EC windows consist of an inorganic stack of thin films deposited onto a glass substrate. The window tint can be reversibly changed by the application of a low power dc voltage. This property can be used to modulate the amount of light and heat entering buildings (or vehicles) through the glazings. By judicious management of this so-called solar heat gain, it is possible to derive significant energy savings due to reductions in heating lighting, and air conditioning (HVAC). Several areas of SAGE’s production were targeted during this project to allow significant improvements to processing throughput, yield and overall quality of the processing, in an effort to reduce the cost and thereby improve the market penetration. First, the overall thin film process was optimized to allow a more robust set of operating points to be used, thereby maximizing the yield due to the thin film deposition themselves. Other significant efforts aimed at improving yield were relating to implementing new procedures and processes for the manufacturing process, to improve the quality of the substrate preparation, and the quality of the IGU fabrication. Furthermore, methods for reworking defective devices were developed, to enable devices which would otherwise be scrapped to be made into useful product. This involved the in-house development of some customized equipment. Finally, the improvements made during this project were validated to ensure that they did not impact the exceptional durability of the SageGlass® products. Given conservative estimates for cost and market penetration, energy savings due to EC windows in residences in the US are calculated to be of the order 0.026 quad (0.026×1015BTU/yr) by the year 2017.

  4. Edit Distance to Monotonicity in Sliding Windows

    CERN Document Server

    Chan, Ho-Leung; Lee, Lap-Kei; Pan, Jiangwei; Ting, Hing-Fung; Zhang, Qin

    2011-01-01

    Given a stream of items each associated with a numerical value, its edit distance to monotonicity is the minimum number of items to remove so that the remaining items are non-decreasing with respect to the numerical value. The space complexity of estimating the edit distance to monotonicity of a data stream is becoming well-understood over the past few years. Motivated by applications on network quality monitoring, we extend the study to estimating the edit distance to monotonicity of a sliding window covering the $w$ most recent items in the stream for any $w \\ge 1$. We give a deterministic algorithm which can return an estimate within a factor of $(4+\\eps)$ using $O(\\frac{1}{\\eps^2} \\log^2(\\eps w))$ space. We also extend the study in two directions. First, we consider a stream where each item is associated with a value from a partial ordered set. We give a randomized $(4+\\epsilon)$-approximate algorithm using $O(\\frac{1}{\\epsilon^2} \\log \\epsilon^2 w \\log w)$ space. Second, we consider an out-of-order strea...

  5. Conformal window and Landau singularities

    CERN Document Server

    Grunberg, G

    2001-01-01

    A physical characterization of Landau singularities is emphasized, which should trace the lower boundary N_f^* of the conformal window in QCD and supersymmetric QCD. A natural way to disentangle ``perturbative'' from ``non-perturbative'' contributions below N_f^* is suggested. Assuming an infrared fixed point is present in the perturbative part of the QCD coupling even in some range below N_f^* leads to the condition gamma(N_f^*)=1, where gamma is the critical exponent. Using the Banks-Zaks expansion, one gets 4window. Some evidence for such a fixed point in QCD is provided through a modified Banks-Zaks expansion. Conformal window amplitudes, which contain power contributions, are show...

  6. RUGGED CERAMIC WINDOW FOR RF APPLICATIONS

    Energy Technology Data Exchange (ETDEWEB)

    MIKE NEUBAUER

    2012-11-01

    High-current RF cavities that are needed for many accelerator applications are often limited by the power transmission capability of the pressure barriers (windows) that separate the cavity from the power source. Most efforts to improve RF window design have focused on alumina ceramic, the most popular historical choice, and have not taken advantage of new materials. Alternative window materials have been investigated using a novel Merit Factor comparison and likely candidates have been tested for the material properties which will enable construction in the self-matched window configuration. Window assemblies have also been modeled and fabricated using compressed window techniques which have proven to increase the power handling capability of waveguide windows. Candidate materials have been chosen to be used in fabricating a window for high power testing at Thomas Jefferson National Accelerator Facility.

  7. Energy Gaining Windows for Residental Buildings

    DEFF Research Database (Denmark)

    Kragh, Jesper; Laustsen, Jacob Birck; Svendsen, Svend

    This paper presents some of the research done during the last 8 years at the Technical University of Denmark developing improved low-energy window solutions. The focus has been on maximizing the net energy gain of windows for residential buildings. The net energy gain of windows is the solar gain...... windows have already been developed and prototypes constructed for laboratory test and a third generation of the window design is now in the developing and designing face in a new project. The first window constructed was made of wood profiles and a low-energy double glazing unit. The second and third...... and longer durability of the window. The glazing in these fiber reinforced polyester windows is both unsealed and sealed triple glazing units. To increase the net energy gain slim frame profiles have been developed to increase the glazing area and thereby the solar gain. The challenge when developing slim...

  8. Microsoft Windows Intune 20 Quickstart Administration

    CERN Document Server

    Overton, David

    2012-01-01

    This book is a concise and practical tutorial that shows you how to plan, set up and maintain Windows Intune and manage a group of PCs. If you are an administrator or partner who wants to plan, set up and maintain Windows Intune and manage a group of PCs then this book is for you . You should have a basic understanding of Windows administration, however, knowledge of Windows Intune would not be required.

  9. Windows Embedded创新不断

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    本刊讯 2月19日,微软Windows Embedded技术交流活动在微软办公室举行。微软的MVP(最有价值专家)详细介绍微软Windows Embedded的技术、开发和应用,包括:Windows EmbeddedCE、Windows XP Embedded、WEPOS等。

  10. Interaction of anesthetics with neurotransmitter release machinery proteins.

    Science.gov (United States)

    Xie, Zheng; McMillan, Kyle; Pike, Carolyn M; Cahill, Anne L; Herring, Bruce E; Wang, Qiang; Fox, Aaron P

    2013-02-01

    General anesthetics produce anesthesia by depressing central nervous system activity. Activation of inhibitory GABA(A) receptors plays a central role in the action of many clinically relevant general anesthetics. Even so, there is growing evidence that anesthetics can act at a presynaptic locus to inhibit neurotransmitter release. Our own data identified the neurotransmitter release machinery as a target for anesthetic action. In the present study, we sought to examine the site of anesthetic action more closely. Exocytosis was stimulated by directly elevating the intracellular Ca(2+) concentration at neurotransmitter release sites, thereby bypassing anesthetic effects on channels and receptors, allowing anesthetic effects on the neurotransmitter release machinery to be examined in isolation. Three different PC12 cell lines, which had the expression of different release machinery proteins stably suppressed by RNA interference, were used in these studies. Interestingly, there was still significant neurotransmitter release when these knockdown PC12 cells were stimulated. We have previously shown that etomidate, isoflurane, and propofol all inhibited the neurotransmitter release machinery in wild-type PC12 cells. In the present study, we show that knocking down synaptotagmin I completely prevented etomidate from inhibiting neurotransmitter release. Synaptotagmin I knockdown also diminished the inhibition produced by propofol and isoflurane, but the magnitude of the effect was not as large. Knockdown of SNAP-25 and SNAP-23 expression also changed the ability of these three anesthetics to inhibit neurotransmitter release. Our results suggest that general anesthetics inhibit the neurotransmitter release machinery by interacting with multiple SNARE and SNARE-associated proteins.

  11. Experimental analysis of single sided ventilation through a centre pivot roof window

    DEFF Research Database (Denmark)

    Iqbal, Ahsan; Afshari, Alireza; Heiselberg, Per

    2015-01-01

    In the present study bidirectional airflow characteristics of a centre-pivot roof window were analysed in-situ. Both wind and temperature differences were present at the time of measurements. Tracer gas technique using N2O gas was used to estimate the air change rates in the experimental space....... Leakages through the experimental space were estimated using the blower door tests. Air-change rates increased with increase in the window sash opening angle. When the window was open all the way, with an average wind speed of 4 m/s, the average air-change rate was 2. Flow factor was used to characterise...

  12. Windows shell扩展技术

    Institute of Scientific and Technical Information of China (English)

    唐东明

    2005-01-01

    Windows shell提供了很多扩展编程接口,可使程序编制人员丰富Windows shell的功能.文中详细阐述了Windows shell的扩展技术,并讲解了如何用ATL开发Win-dows shell扩展组件的技术和方法.

  13. Windowing Waveform Relaxation of Initial Value Problems

    Institute of Scientific and Technical Information of China (English)

    Yao-lin Jiang

    2006-01-01

    We present a windowing technique of waveform relaxation for dynamic systems. An effective estimation on window length is derived by an iterative error expression provided here. Relaxation processes can be speeded up if one takes the windowing technique in advance. Numerical experiments are given to further illustrate the theoretical analysis.

  14. Spatial scan statistics using elliptic windows

    DEFF Research Database (Denmark)

    Christiansen, Lasse Engbo; Andersen, Jens Strodl; Wegener, Henrik Caspar

    of confocal elliptic windows and propose a new way to present the information when a spatial point process is considered. This method gives smooth changes for smooth expansions of the set of clusters. A simulation study is used to show how the elliptic windows outperforms the usual circular windows...

  15. Spatial scan statistics using elliptic windows

    DEFF Research Database (Denmark)

    Christiansen, Lasse Engbo; Andersen, Jens Strodl; Wegener, Henrik Caspar

    2006-01-01

    windows and propose a new way to present the information when a spatial point process is considered. This method gives smooth changes for smooth expansions of the set of clusters. A simulation study is used to show how the elliptic windows outperforms the usual circular windows. The proposed method...

  16. Interactive floating windows: a new technique for stereoscopic video games

    Science.gov (United States)

    Zerebecki, Chris; Stanfield, Brodie; Tawadrous, Mina; Buckstein, Daniel; Hogue, Andrew; Kapralos, Bill

    2012-03-01

    The film industry has a long history of creating compelling experiences in stereoscopic 3D. Recently, the video game as an artistic medium has matured into an effective way to tell engaging and immersive stories. Given the current push to bring stereoscopic 3D technology into the consumer market there is considerable interest to develop stereoscopic 3D video games. Game developers have largely ignored the need to design their games specifically for stereoscopic 3D and have thus relied on automatic conversion and driver technology. Game developers need to evaluate solutions used in other media, such as film, to correct perceptual problems such as window violations, and modify or create new solutions to work within an interactive framework. In this paper we extend the dynamic floating window technique into the interactive domain enabling the player to position a virtual window in space. Interactively changing the position, size, and the 3D rotation of the virtual window, objects can be made to 'break the mask' dramatically enhancing the stereoscopic effect. By demonstrating that solutions from the film industry can be extended into the interactive space, it is our hope that this initiates further discussion in the game development community to strengthen their story-telling mechanisms in stereoscopic 3D games.

  17. FOREWORD: 26th IAHR Symposium on Hydraulic Machinery and Systems

    Science.gov (United States)

    Wu, Yulin; Wang, Zhengwei; Liu, Shuhong; Yuan, Shouqi; Luo, Xingqi; Wang, Fujun

    2012-11-01

    The 26th IAHR Symposium on Hydraulic Machinery and Systems, will be held in Beijing, China, 19-23 August 2012. It is jointly organized by Tsinghua University, State Key Laboratory of Hydro Science and Hydraulic Engineering, China, Jiangsu University, Xi'an University of Technology, China Agricultural University, National Engineering Research Center of Hydropower Equipment and Dongfang Electric Machinery Co., Ltd. It is the second time that China hosts such a symposium. By the end of 2011, the China electrical power system had a total of 1 050 GW installed power, out of which 220 GW was in hydropower plants. The energy produced in hydropower facilities was 662.6 TWh from a total of 4,720 TWh electrical energy production in 2011. Moreover, in 2020, new hydropower capacities are going to be developed, with a total of 180 GW installed power and an estimated 708 TWh/year energy production. And in 2011, the installed power of pumped storage stations was about 25GW. In 2020, the data will be 70GW. At the same time, the number of pumps used in China is increasing rapidly. China produces about 29,000,000 pumps with more than 220 series per year. By the end of 2011, the Chinese pumping system has a total of 950 GW installed power. The energy consumed in pumping facilities was 530 TWh in 2011. The pump energy consumption accounted for about 12% of the national electrical energy production. Therefore, there is a large market in the field of hydraulic machinery including water turbines, pump turbines and a variety of pumps in China. There are also many research projects in this field. For example, we have conducted National Key Research Projects on 1000 MW hydraulic turbine, and on the pump turbines with high head, as well as on the large capacity pumps for water supply. Tsinghua University of Beijing is proud to host the 26th IAHR Symposium on Hydraulic Machinery and Systems. Tsinghua University was established in 1911, after the founding of the People's Republic of China. It

  18. Multiscale singular value manifold for rotating machinery fault diagnosis

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Yi; Lu, BaoChun; Zhang, Deng Feng [School of Mechanical Engineering, Nanjing University of Science and Technology,Nanjing (United States)

    2017-01-15

    Time-frequency distribution of vibration signal can be considered as an image that contains more information than signal in time domain. Manifold learning is a novel theory for image recognition that can be also applied to rotating machinery fault pattern recognition based on time-frequency distributions. However, the vibration signal of rotating machinery in fault condition contains cyclical transient impulses with different phrases which are detrimental to image recognition for time-frequency distribution. To eliminate the effects of phase differences and extract the inherent features of time-frequency distributions, a multiscale singular value manifold method is proposed. The obtained low-dimensional multiscale singular value manifold features can reveal the differences of different fault patterns and they are applicable to classification and diagnosis. Experimental verification proves that the performance of the proposed method is superior in rotating machinery fault diagnosis.

  19. Intelligent Control Scheme of Engineering Machinery of Cluster Hybrid System

    Institute of Scientific and Technical Information of China (English)

    GAO Qiang; WANG Hongli

    2005-01-01

    In a hybrid system, the subsystems with discrete dynamics play a central role in a hybrid system. In the course of engineering machinery of cluster construction, the discrete control law is hard to obtain because the construction environment is complex and there exist many affecting factors. In this paper, hierarchically intelligent control, expert control and fuzzy control are introduced into the discrete subsystems of engineering machinery of cluster hybrid system, so as to rebuild the hybrid system and make the discrete control law easily and effectively obtained. The structures, reasoning mechanism and arithmetic of intelligent control are replanted to discrete dynamic, conti-nuous process and the interface of the hybrid system. The structures of three types of intelligent hybrid system are presented and the human experiences summarized from engineering machinery of cluster are taken into account.

  20. A New Fault Diagnosis Method of Rotating Machinery

    Directory of Open Access Journals (Sweden)

    Chih-Hao Chen

    2008-01-01

    Full Text Available This paper presents a new fault diagnosis procedure for rotating machinery using the wavelet packets-fractal technology and a radial basis function neural network. The faults of rotating machinery considered in this study include imbalance, misalignment, looseness and imbalance combined with misalignment conditions. When such faults occur, they usually induce non-stationary vibrations to the machine. After measuring the vibration signals, the wavelet packets transform is applied to these signals. The fractal dimension of each frequency bands is extracted and the box counting dimension is used to depict the failure characteristics of the vibration signals. The failure modes are then classified by a radial basis function neural network. An experimental study was performed to evaluate the proposed method and the results show that the method can effectively detect and recognize different kinds of faults of rotating machinery.

  1. Integrated measure and control system for textile machinery

    Science.gov (United States)

    Liu, Yuantao; Zhao, Jinzhi; Zhao, Zexiang

    2010-12-01

    In this paper, textile mechanical drive control is researched. Textile machinery integrated measure and control system is established. The system is composed of micro-computer, PLC, transducer, implement device, all kinds of detective components and industrial Ethernet etc. Technology of industrial field bus control and Internet technique are applied. The system is on a background of textile production technique, such as spring, woven, chemical fiber, non-woven, dyeing and finishing. A network based open integrated control system is developed. Various characteristics of production technique flow and textile machinery movement discipline are presented. Configuration software is introduced according to user's control tasks. Final remote automatic controls are finished. This may make development cost reduced, and development periods shortened. Some problems in textile machinery development process are solved, which may make transparency factory and remote development realized.

  2. Purged window apparatus utilizing heated purge gas

    Science.gov (United States)

    Ballard, Evan O.

    1984-01-01

    A purged window apparatus utilizing tangentially injected heated purge gases in the vicinity of electromagnetic radiation transmitting windows, and a tapered external mounting tube to accelerate these gases to provide a vortex flow on the window surface and a turbulent flow throughout the mounting tube. Use of this apparatus prevents backstreaming of gases under investigation which are flowing past the mouth of the mounting tube which would otherwise deposit on the windows. Lengthy spectroscopic investigations and analyses can thereby be performed without the necessity of interrupting the procedures in order to clean or replace contaminated windows.

  3. Windows Command Line Administration Instant Reference

    CERN Document Server

    Mueller, John Paul

    2010-01-01

    The perfect companion to any book on Windows Server 2008 or Windows 7, and the quickest way to access critical information. Focusing just on the essentials of command-line interface (CLI), Windows Command-Line Administration Instant Reference easily shows how to quickly perform day-to-day tasks of Windows administration without ever touching the graphical user interface (GUI). Specifically designed for busy administrators, Windows Command-Line Administration Instant Reference replaces many tedious GUI steps with just one command at the command-line, while concise, easy to access answers provid

  4. MicroRNA Machinery Genes as Novel Biomarkers for Cancer.

    Science.gov (United States)

    Huang, Jing-Tao; Wang, Jin; Srivastava, Vibhuti; Sen, Subrata; Liu, Song-Mei

    2014-01-01

    MicroRNAs (miRNAs) directly and indirectly affect tumorigenesis. To be able to perform their myriad roles, miRNA machinery genes, such as Drosha, DGCR8, Dicer1, XPO5, TRBP, and AGO2, must generate precise miRNAs. These genes have specific expression patterns, protein-binding partners, and biochemical capabilities in different cancers. Our preliminary analysis of data from The Cancer Genome Atlas consortium on multiple types of cancer revealed significant alterations in these miRNA machinery genes. Here, we review their biological structures and functions with an eye toward understanding how they could serve as cancer biomarkers.

  5. Professional Windows Embedded Compact 7

    CERN Document Server

    Phung, Samuel; Joubert, Thierry; Hall, Mike

    2011-01-01

    Learn to program an array of customized devices and solutions As a compact, highly efficient, scalable operating system, Windows Embedded Compact 7 (WEC7) is one of the best options for developing a new generation of network-enabled, media-rich, and service-oriented devices. This in-depth resource takes you through the benefits and capabilities of WEC7 so that you can start using this performance development platform today. Divided into several major sections, the book begins with an introduction and then moves on to coverage of OS design, application development, advanced application developm

  6. Windows Vista已亮相

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Windows Vista企业版已于11月底发布,而个人版将于明年1月30日推出。权威调研机构IDC本周三预计,Vista明年的销量可达到9000万套。在明年新售PC机中,90%的个人PC将安装Vista操作系统,而企业PC安装Vista的比例将只有35%。

  7. EFEKTIFITAS VARIASI NILAI WINDOW LEVEL TERHADAP KUALITAS HASIL CT SCAN THORAX LUNG WINDOW

    OpenAIRE

    dani, Rahma

    2014-01-01

    EFEKTIFITAS VARIASI NILAI WINDOW LEVEL TERHADAP KUALITAS HASIL CT SCAN THORAX LUNG WINDOW Rahmadani Jurusan Fisika, FMIPA, Universitas Hasanuddin, Makassar 90245, Indonesia Pembimbing Utama : Prof. Dr. H. Halmar Halide, M.Sc Pembimbing Pertama : Dahlang Tahir, M.Sc. Phd ABSTRAK Telah dilakukan penelitian untuk mengetahui efek variasi nilai window level terhadap kualitas hasil CT Scann thorax lung window dengan pengaturan window width 1000,1500, 2000 dengan varias...

  8. Windows 2012 Server network security securing your Windows network systems and infrastructure

    CERN Document Server

    Rountree, Derrick

    2013-01-01

    Windows 2012 Server Network Security provides the most in-depth guide to deploying and maintaining a secure Windows network. The book drills down into all the new features of Windows 2012 and provides practical, hands-on methods for securing your Windows systems networks, including: Secure remote access Network vulnerabilities and mitigations DHCP installations configuration MAC filtering DNS server security WINS installation configuration Securing wired and wireless connections Windows personal firewall

  9. An SVD Investigation of Modeling Scatter in Multiple Energy Windows for Improved SPECT Images.

    Science.gov (United States)

    Kadrmas, Dan J; Frey, Eric C; Tsui, Benjamin M W

    1996-08-01

    In this work singular value decomposition (SVD) techniques are used to investigate how the use of low energy photons and multiple energy windows affects the noise properties of Tc-99m SPECT imaging. We have previously shown that, when modeling scatter in the projector and backprojector of iterative reconstruction algorithms, simultaneous reconstruction from multiple energy window data can result in very different noise characteristics. Further, the properties depend upon the width and number of energy windows used. To investigate this further, we have generated photon transport matrices using models for scatter, an elliptical phantom containing cold rods of various sizes, and a number of multiple energy window acquisition schemes. Transfer matrices were also generated for the cases of perfect scatter rejection and ideal scatter subtraction. The matrices were decomposed using SVD, and signal power and projection space variance spectra were computed using the basis formed by the left singular vectors. Results indicate very different noise levels for the various energy window combinations. The perfect scatter rejection case resulted in the lowest variance spectrum, and reconstruction-based scatter compensation performed better than the scatter subtraction case. When including lower energy photons in reconstruction-based scatter compensation, using a series of multiple energy windows outperformed a single large energy window. One multiple window combination is presented which achieves a lower variance spectrum than the standard 20% energy window, indicating the potential for using low energy photons to improve the noise characteristics of SPECT images.

  10. Experimental and Numerical Research of the Thermal Properties of a PCM Window Panel

    Directory of Open Access Journals (Sweden)

    Martin Koláček

    2017-07-01

    Full Text Available This paper reports the experimental and simulation analysis of a window system incorporating Phase Change Materials (PCMs. In this study, the latent heat storage material is exploited to increase the thermal mass of the building component. A PCM-filled window can increase the possibilities of storage energy from solar radiation and reduce the heating cooling demand. The presented measurements were performed on a specific window panel that integrates a PCM. The PCM window panel consists of four panes of safety glass with three gaps, of which the first one contains a prismatic glass, the second a krypton gas, and the last one a PCM. New PCM window panel technology uses the placement of the PCM in the whole space of the window cavity. This technology improves the thermal performance and storage mass of the window panel. The results show the incongruent melting of salt hydrates and the high thermal inertia of the PCM window panel. The simulation data showed that the PCM window panel and the double glazing panel markedly reduced the peak temperature on the interior surface, reduced the air temperature inside the room, and also considerably improved the thermal mass of the building. This means that the heat energy entering the building through the panel is reduced by 66% in the summer cycle.

  11. Pericardial Window Formation Complicated by Intrapericardial Diaphragmatic Hernia

    Directory of Open Access Journals (Sweden)

    Jeremy Docekal

    2014-01-01

    Full Text Available In rare circumstances, a diaphragmatic defect may allow for herniation of intra-abdominal contents into the pericardial space. These occurrences are exceedingly rare and may be due to trauma or congenital defects of the septum transversum or as the result of surgical procedures. We describe a 73-year-old female who presented with cardiac and abdominal symptoms one month after undergoing a subxiphoid pericardioperitoneal window for treatment and evaluation of a symptomatic pericardial effusion.

  12. White-Paper Report:Textile Machinery Industry (2005-2009) Economic Performance in Chinese Textile Machinery Industry

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    This report is accomplished by China Textile Machinery and Accessories Association to be part of the Annual Report of China Textile Industry that comes out in the middle of the year.Given that all the official statistics are channeled to each industrial sector four times a year(March,May,Aug.Nov.) ,it comes as no surprise at all when an annual report is prepared at the beginning of the new year by taking eleven months into account because of the data availability from the government.This report of Chinese textile machinery industry is also based on the data attainable from Jan.to Nov.in 2009.

  13. Broken Windows and Collective Efficacy

    Directory of Open Access Journals (Sweden)

    Aldrin Abdullah

    2015-01-01

    Full Text Available The broken windows thesis posits that signs of disorder increase crime and fear, both directly and indirectly. Although considerable theoretical evidence exists to support the idea that disorder is positively related to fear of crime, the empirical literature on examining the indirect effect of the individual’s perception of incivilities on fear of crime is limited, especially in developing countries. This research was conducted to assess the indirect relationship between perceived disorder and fear of crime through collective efficacy. A total of 235 households from Penang, Malaysia, participated in this study. Results reveal that high perception of disorder is negatively associated with collective efficacy. High collective efficacy is associated with low fear of crime. Moreover, a significant and indirect effect of disorder on fear of crime exists through collective efficacy. The results provide empirical support for the broken windows theory in the Malaysian context and suggest that both environmental conditions and interactions of residents play a role in the perceived fear of crime.

  14. Rapid Growth of China Petroleum Machinery Manufacturing (continued)

    Institute of Scientific and Technical Information of China (English)

    Huang Zhiqian; Sun Zuchen; Wang Keyu

    1996-01-01

    @@ Technology for petroleum machinery design and manufacturing upgraded remarkably The basic research on rock bit. drilling pump. pump valve, piston, flooding pumps, derrick, shale shaker.hydraulic blowout preventer, torque converter, pumping unit. sucker rod. submersible pump. fracturing pump centrifugal pump. pneumatic parts, geophone and acquisition station has reached the advanced international level.

  15. The capacity of sugar beet farms’ machinery and equipment

    Directory of Open Access Journals (Sweden)

    Małgorzata BZOWSKA – BAKALARZ

    2012-12-01

    Full Text Available The survey investigates into equipment of sugar beet farms of the Lublin region, Poland, with machinery – with reference to plantation size and yields. To assess the production potential of the farms, the authors determined the age structure of the machinery owned by the farmers and established the scale of investment in new equipment. The machinery most important for sugar beet production are pre-sowing and post-harvest tillage units, sprayers, seed drills, combine harvesters and self-unloading trailers. In most cases, the surveyed farmers own most of these machines, but they are often obsolete: 37% of them is in operation for more than 15 years. As for the machines dedicated solely to sugar beet growing (harvesters and seeders, their age structure is most unfavourable – 70% of them have been used for over 15 years. A trend towards increasing plantation sizes provides incentives for introducing innovation to cultivation methods. However, the scale of investment in new machinery is small, especially in the case of small and medium-sized farms that dominate in the region. The authors surveyed also the scale of using professional services in the field of tillage processes to determine changes in farming practices.

  16. TRACTOR REPAIR. AGRICULTURAL MACHINERY--SERVICE OCCUPATIONS, MODULE NUMBER 16.

    Science.gov (United States)

    Ohio State Univ., Columbus. Center for Vocational and Technical Education.

    THE PURPOSE OF THIS GUIDE IS TO HELP TEACHERS PREPARE POSTSECONDARY STUDENTS FOR THE AGRICULTURAL MACHINERY SERVICE OCCUPATIONS AS PARTS MEN, MECHANICS, MECHANIC'S HELPERS, AND SERVICE SUPERVISORS. IT WAS DESIGNED BY A NATIONAL TASK FORCE ON THE BASIS OF RESEARCH FROM STATE STUDIES. THE MAJOR OBJECTIVE IS TO DEVELOP (1) AN UNDERSTANDING OF THE…

  17. Analysis of noise control measures on outdoor machinery using EQUIP+

    NARCIS (Netherlands)

    Dittrich, M.G.

    2006-01-01

    Noise control of different types of outdoor machinery covered by EU Directive 2000/14/EC such as construction machines, generators and other equipment powered by internal combustion engines requires knowledge of the noise path model and the potential noise control measures. As there is often a

  18. Giardia mitosomal protein import machinery differentially recognizes mitochondrial targeting signals.

    Science.gov (United States)

    Nyindodo-Ogari, Lilian; Schwartzbach, Steven D; Estraño, Carlos E

    2014-01-01

    Giardia lamblia mitosomes are believed to be vestigial mitochondria which lack a genome. Similar to higher eukaryotes, mitosomal proteins possess either N-terminal or internal mitosomal targeting sequences. To date, some components of the higher eukaryote archetypal mitochondrial protein import apparatus have been identified and characterized in Giardia mitosomes; therefore, it is expected that mitochondrial signals will be recognized by the mitosomal protein import system. To further determine the level of conservation of the Giardia mitosome protein import apparatus, we expressed mitochondrial proteins from higher eukaryotes in Giardia. These recombinant proteins include Tom20 and Tom22; two components of the mitochondrial protein import machinery. Our results indicate that N-terminal mitochondrial targeting sequence is recognized by the mitosomal protein import machinery; however, interestingly the internal mitochondrial targeting sequences of higher eukaryotes are not recognized by the mitosome. Our results indicate that Giardia mitosome protein transport machinery shows differential recognition of higher eukaryotic mitochondria transfer signals, suggesting a divergence of the transport system in G. lamblia. Therefore, our data support the hypothesis that the protein import machinery in Giardia lamblia mitosome is an incomplete vestigial derivative of mitochondria components.

  19. Implications of material selection on the design of packaging machinery.

    Science.gov (United States)

    Merritt, J P

    2009-01-01

    Material selection has significant implications on the design and cost of horizontal-form-fill-seal packaging machinery. To avoid excessive costs, machine redesigns and project delays, material selection must be reconciled early in the project and revisited throughout the construction of the machine.

  20. PTP1B targets the endosomal sorting machinery

    DEFF Research Database (Denmark)

    Stuible, Matthew; Abella, Jasmine V; Feldhammer, Matthew;

    2010-01-01

    STAM2 specifically suppressed Akt activation, and a phosphorylation-deficient STAM2 mutant displayed prolonged localization on endosomes following EGF stimulation. These results reveal a novel link between the dephosphorylation and endocytic machinery and suggest that PTP1B can affect RTK signaling...

  1. 500 Million Yuan Textile Machinery Project Located in Laiyang

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Textile machinery project with 500 million Yuan investment was formally signed in Yantai Laiyang Development Zone on November 15, which is the l Oth project in the development zone with more than 100 million Yuan investment, and the 5th project in the development zone with more than 500 million Yuan investment.

  2. Complex multimaterial insulating frames for windows with evacuated glazing

    Energy Technology Data Exchange (ETDEWEB)

    Yueping Fang; Eames, P.C.; Hyde, T.J. [University of Ulster, Newtonabbey (United Kingdom). Centre for Sustainable Technologies; Norton, B. [Dublin Institute of Technology, Dublin (Ireland)

    2005-09-01

    The thermal performance of a complex multimaterial frame consisting of an exoskeleton framework and cavities filled with insulant materials enclosing an evacuated glazing was simulated using a two-dimensional finite element model and the results were validated experimentally using a guarded hot box calorimeter. The analysed 0.5 m by 0.5 m evacuated glazing consisted of two low-emittance film coated glass panes supported by an array of 0.32 mm diameter pillars spaced 25 mm apart, contiguously sealed by a 10 mm wide metal edge seal. Thermal performance of windows employing evacuated glazing set in various complex multimaterial frames were analysed in detail. Very good agreement was found between simulations and experimental measurements of surface temperatures of the evacuated glazing window system. The heat loss from a window with an evacuated glazing and a complex multimaterial frame is about 80% of that for a window comprised of an evacuated glazing set in a single material solid frame. (author)

  3. Complex multimaterial insulating frames for windows with evacuated glazing

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Yueping; Eames, Philip C.; Hyde, Trevor J. [Centre for Sustainable Technologies, School of the Built Environment, University of Ulster, Newtownabbey, N. Ireland BT37 0QB (United Kingdom); Norton, Brian [Dublin Institute of Technology, Aungier Street, Dublin 2 (Ireland)

    2005-09-01

    The thermal performance of a complex multimaterial frame consisting of an exoskeleton framework and cavities filled with insulant materials enclosing an evacuated glazing was simulated using a two-dimensional finite element model and the results were validated experimentally using a guarded hot box calorimeter. The analysed 0.5m by 0.5m evacuated glazing consisted of two low-emittance film coated glass panes supported by an array of 0.32mm diameter pillars spaced 25mm apart, contiguously sealed by a 10mm wide metal edge seal. Thermal performance of windows employing evacuated glazing set in various complex multimaterial frames were analysed in detail. Very good agreement was found between simulations and experimental measurements of surface temperatures of the evacuated glazing window system. The heat loss from a window with an evacuated glazing and a complex multimaterial frame is about 80% of that for a window comprised of an evacuated glazing set in a single material solid frame. (author)

  4. ADJUSTMENT, MAINTENANCE, AND REPAIR OF TILLAGE, PLANTING, SPRAYING, AND FERTILIZING MACHINERY. AGRICULTURAL MACHINERY--SERVICE OCCUPATIONS, MODULE NUMBER 10.

    Science.gov (United States)

    Ohio State Univ., Columbus. Center for Vocational and Technical Education.

    THE PURPOSE OF THIS GUIDE IS TO HELP TEACHERS PREPARE POSTSECONDARY-LEVEL STUDENTS FOR THE AGRICULTURAL MACHINERY SERVICE OCCUPATIONS AS PARTS MEN, MECHANICS, MECHANIC'S HELPERS, AND SERVICE SUPERVISORS. IT WAS DESIGNED BY A NATIONAL TASK FORCE ON THE BASIS OF RESEARCH FROM STATE STUDIES. THE MAJOR OBJECTIVE IS TO DEVELOP (1) STUDENT UNDERSTANDING…

  5. Hybrid window layer for photovoltaic cells

    Science.gov (United States)

    Deng, Xunming

    2010-02-23

    A novel photovoltaic solar cell and method of making the same are disclosed. The solar cell includes: at least one absorber layer which could either be a lightly doped layer or an undoped layer, and at least a doped window-layers which comprise at least two sub-window-layers. The first sub-window-layer, which is next to the absorber-layer, is deposited to form desirable junction with the absorber-layer. The second sub-window-layer, which is next to the first sub-window-layer, but not in direct contact with the absorber-layer, is deposited in order to have transmission higher than the first-sub-window-layer.

  6. Editorial - Opening windows onto data

    Directory of Open Access Journals (Sweden)

    Judith Winters

    2012-05-01

    Full Text Available One of Internet Archaeology's strengths and 'unique selling points' not yet replicated by (many other e-journals, is that data is integrated into articles rather than being 'supplementary' or offered for download. The aim has always been for the narrative to be a wave driving readers towards the underlying data. Opening windows onto the data from within the text is one of the things I think the journal does best and is a feature used throughout Emma Durham's article 'Depicting the gods: metal figurines in Roman Britain'. Archaeological data does not speak for itself. It needs a narrative. It needs context. But by intermeshing data with interpretation, readers can dip into the data and start to explore it while reading the article, allowing a more immediate understanding of the bigger picture.

  7. Waggle Dances and Azimuthal Windows

    Directory of Open Access Journals (Sweden)

    O. Duangphakdee

    2011-01-01

    Full Text Available Because the waggle dances of honeybees contain celestial components, modifications of the dances occur with changing celestial moves relative to a honeybee nest. Since the direction of a particular resource is static, the dances must alter to compensate for the sun's passage. The position of the sun is seasonal between the Tropics of Cancer and Capricorn so that turns at the end of waggle runs will vary with season and latitude. The bees are confronted with a new difficulty when the sun closely approaches its zenith because only slight errors in the bees' estimation of the relative positions of the sun and zenith generate very large errors. So, the sun compass loses its usefulness when at its zenith. We review experiments and observations on both foraging and absconding in relation to the azimuth. The honeybees' solution for the paradox of the azimuth includes an azimuthal lull, preferences, and time windows.

  8. Instant Windows PowerShell

    CERN Document Server

    Menon, Vinith

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. A practical, hands-on tutorial approach that explores the concepts of PowerShell in a friendly manner, taking an adhoc approach to each topic.If you are an administrator who is new to PowerShell or are looking to get a good grounding in these new features, this book is ideal for you. It's assumed that you will have some experience in PowerShell and Windows Server, as well being familiar with the PowerShell command-line.

  9. Stator Blade Laser Window Research

    Science.gov (United States)

    Lugas, Grant A.

    2004-01-01

    All turbofan engines used in modern aviation contain a series of fan blades and compressor blades which are all connected to one drive shaft. Inside the jet engine between each set of blades are stator blades, which are pitched opposite of the fan and compressor blades, the stator blades are both rotational and axial fixed in place. The project that I was assigned to involves the QAT 22 fan test rig; which is currently under final design review and very soon will be fabricated. The purpose of this research facility is to better understand the effects of stator blades. Stator blades are used to straiten the air in a turbine. The researcher's primary aim is to determine what the airflow is like at both the leading edge and the trailing edge of a stator blade. My work focused on designing the windows usable for both a compressor rig and a test fan rig. The difference between the two is the test fan application will be looking into a stator blade array rather than just looking at the rotor. My discussion will include a detailed explanation of how the PIV laser window system functions fiom start to finish. I will also discuss how the information is gathered and organized. Further more I plan to talk about the purpose of this kind of research and the advantages to using this technology to determine the airflow characteristics of blade designs. Finally I will discuss the researcher s conclusion on the relationship between aerodynamics of a blade and how noise is produced. NASA's main goal with this particular facility is find ways to quiet engine noise by reducing the amount of cavitations that occurs around the blades of a turbofan engine. Additional information is included in the original extended abstract.

  10. Stator Blade Laser Window Research

    Science.gov (United States)

    Lugas, Grant A.

    2004-01-01

    All turbofan engines used in modern aviation contain a series of fan blades and compressor blades which are all connected to one drive shaft. Inside the jet engine between each set of blades are stator blades, which are pitched opposite of the fan and compressor blades, the stator blades are both rotational and axial fixed in place. The project that I was assigned to involves the QAT 22 fan test rig; which is currently under final design review and very soon will be fabricated. The purpose of this research facility is to better understand the effects of stator blades. Stator blades are used to straiten the air in a turbine. The researcher's primary aim is to determine what the airflow is like at both the leading edge and the trailing edge of a stator blade. My work focused on designing the windows usable for both a compressor rig and a test fan rig. The difference between the two is the test fan application will be looking into a stator blade array rather than just looking at the rotor. My discussion will include a detailed explanation of how the PIV laser window system functions fiom start to finish. I will also discuss how the information is gathered and organized. Further more I plan to talk about the purpose of this kind of research and the advantages to using this technology to determine the airflow characteristics of blade designs. Finally I will discuss the researcher s conclusion on the relationship between aerodynamics of a blade and how noise is produced. NASA's main goal with this particular facility is find ways to quiet engine noise by reducing the amount of cavitations that occurs around the blades of a turbofan engine. Additional information is included in the original extended abstract.

  11. Windows 7 Annoyances Tips, Secrets, and Solutions

    CERN Document Server

    Karp, David

    2010-01-01

    Windows 7 may be faster and more stable than Vista, but it's a far cry from problem-free. David A. Karp comes to the rescue with the latest in his popular Windows Annoyances series. This thorough guide gives you the tools you need to fix the troublesome parts of this operating system, plus the solutions, hacks, and timesaving tips to make the most of your PC. Streamline Windows Explorer, improve the Search tool, eliminate the Green Ribbon of Death, and tame User Account Control promptsExplore powerful Registry tips and tools, and use them to customize every aspect of Windows and solve its sho

  12. Modelling window opening behaviour in Danish dwellings

    DEFF Research Database (Denmark)

    Andersen, Rune Vinther; Olesen, Bjarne W.; Toftum, Jørn

    2011-01-01

    In this paper we present and analyse data from two studies of window opening behaviour in residential buildings in Denmark. Based on measurements of indoor environment, weather and window opening behaviour in 15 dwellings, we propose a model that will predict window opening behaviour. The data...... showed that other factors than thermal effects impact the behaviour of the occupants. Some of these factors were included in the model. We present data from repeated questionnaire surveys that show that occupants tend to adjust heating setpoints, adjust clothing and operate windows when feeling thermally...

  13. Windows PowerShell 20 Bible

    CERN Document Server

    Lee, Thomas; Schill, Mark E; Tanasovski, Tome

    2011-01-01

    Here's the complete guide to Windows PowerShell 2.0 for administrators and developers Windows PowerShell is Microsoft's next-generation scripting and automation language. This comprehensive volume provides the background that IT administrators and developers need in order to start using PowerShell automation in exciting new ways. It explains what PowerShell is, how to use the language, and specific ways to apply PowerShell in various technologies. Windows PowerShell is Microsoft's standard automation tool and something that every Windows administrator will eventually have to understand; this b

  14. Windows 8.1 for dummies

    CERN Document Server

    Rathbone, Andy

    2013-01-01

    The bestselling book on Windows, now updated for the new 8.1 features Microsoft has fine-tuned Windows 8 with some important new features, and veteran author Andy Rathbone explains every one in this all-new edition of a long-time bestseller. Whether you're using Windows for the first time, upgrading from an older version, or just moving from Windows 8 to 8.1, here's what you need to know. Learn about the dual interfaces, the new Start button, how to customize the interface and boot operations, and how to work with programs and files, use the web and social media, manage music and photos, and

  15. Mastering Windows Server 2008 Networking Foundations

    CERN Document Server

    Minasi, Mark; Mueller, John Paul

    2011-01-01

    Find in-depth coverage of general networking concepts and basic instruction on Windows Server 2008 installation and management including active directory, DNS, Windows storage, and TCP/IP and IPv4 networking basics in Mastering Windows Server 2008 Networking Foundations. One of three new books by best-selling author Mark Minasi, this guide explains what servers do, how basic networking works (IP basics and DNS/WINS basics), and the fundamentals of the under-the-hood technologies that support staff must understand. Learn how to install Windows Server 2008 and build a simple network, security co

  16. Space space space

    CERN Document Server

    Trembach, Vera

    2014-01-01

    Space is an introduction to the mysteries of the Universe. Included are Task Cards for independent learning, Journal Word Cards for creative writing, and Hands-On Activities for reinforcing skills in Math and Language Arts. Space is a perfect introduction to further research of the Solar System.

  17. The Research of Computer Aided Farm Machinery Designing Method Based on Ergonomics

    Science.gov (United States)

    Gao, Xiyin; Li, Xinling; Song, Qiang; Zheng, Ying

    Along with agricultural economy development, the farm machinery product type Increases gradually, the ergonomics question is also getting more and more prominent. The widespread application of computer aided machinery design makes it possible that farm machinery design is intuitive, flexible and convenient. At present, because the developed computer aided ergonomics software has not suitable human body database, which is needed in view of farm machinery design in China, the farm machinery design have deviation in ergonomics analysis. This article puts forward that using the open database interface procedure in CATIA to establish human body database which aims at the farm machinery design, and reading the human body data to ergonomics module of CATIA can product practical application virtual body, using human posture analysis and human activity analysis module to analysis the ergonomics in farm machinery, thus computer aided farm machinery designing method based on engineering can be realized.

  18. Brief introduction of under- stage machinery (continued)%舞台下部机械(续)

    Institute of Scientific and Technical Information of China (English)

    宋宏

    2003-01-01

    It briefly introduces the use of typical under- stage machinery such as stage lifts, stage wagons and turntables in theater. It summarizes the functions,characteristics and drive modes of each type of under -stage machinery at present time.

  19. 49 CFR 1242.42 - Administration, repair and maintenance, machinery repair, equipment damaged, dismantling retired...

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Administration, repair and maintenance, machinery repair, equipment damaged, dismantling retired property, fringe benefits, other casualties and insurance... maintenance, machinery repair, equipment damaged, dismantling retired property, fringe benefits,...

  20. A recognition method of vibration parameter image based on improved immune negative selection algorithm for rotating machinery

    Institute of Scientific and Technical Information of China (English)

    DOU Wei; LIU Zhan-sheng

    2009-01-01

    To overcome the limitations of traditional monitoring methods, based on vibration parameter image of rotating machinery, this paper presents an abnormality online monitoring method suitable for rotating machinery using the negative selection mechanism of biology immune system. This method uses techniques of biology clone and learning mechanism to improve the negative selection algorithm to generate detectors possessing different monitoring radius, covers the abnormality space effectively, and avoids such problems as the low efficiency of generating detectors, etc. The result of an example applying the presented monitoring method shows that this method can solve the difficulty of obtaining fault samples preferably and extract the turbine state character effec tively, it also can detect abnormality by causing various fault of the turbine and obtain the degree of abnormality accurately. The exact monitoring precision of abnormality indicates that this method is feasible and has better on-line quality, accuracy and robustness.

  1. Theoretical vibro-acoustic modeling of acoustic noise transmission through aircraft windows

    Science.gov (United States)

    Aloufi, Badr; Behdinan, Kamran; Zu, Jean

    2016-06-01

    In this paper, a fully vibro-acoustic model for sound transmission across a multi-pane aircraft window is developed. The proposed model is efficiently applied for a set of window models to perform extensive theoretical parametric studies. The studied window configurations generally simulate the passenger window designs of modern aircraft classes which have an exterior multi-Plexiglas pane, an interior single acrylic glass pane and a dimmable glass ("smart" glass), all separated by thin air cavities. The sound transmission loss (STL) characteristics of three different models, triple-, quadruple- and quintuple-paned windows identical in size and surface density, are analyzed for improving the acoustic insulation performances. Typical results describing the influence of several system parameters, such as the thicknesses, number and spacing of the window panes, on the transmission loss are then investigated. In addition, a comparison study is carried out to evaluate the acoustic reduction capability of each window model. The STL results show that the higher frequencies sound transmission loss performance can be improved by increasing the number of window panels, however, the low frequency performance is decreased, particularly at the mass-spring resonances.

  2. The Nicest way to migrate your Windows computer ( The Windows 2000 Migration Task Force)

    CERN Multimedia

    2001-01-01

    With Windows 2000, CERN users will discover a more stable and reliable working environment and will have access to all the latest applications. The Windows 2000 Migration Task Force - a representative from each division.

  3. On the long time behavior of the TCP window size process

    National Research Council Canada - National Science Library

    Chafaï, Djalil; Malrieu, Florent; Paroux, Katy

    2010-01-01

    ... TCP window size process. This process has [ 0 , ∞ ) as state space and its infinitesimal generator is given, for any smooth function f : [ 0 , ∞ ) → R , by (1) L ( f ) ( x ) = f ′ ( x ) + x ∫ 0 1 ( f ( h x ) − f ( x ) ) H ( d h ) for some probability measure H supported in [ 0 , 1 ) . This window size ( X t ) t increases linearl...

  4. Windows Vista系统网络会议新功能介绍

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Windows Meeting Space(WMS)是Windows Vista中新增加的网络会议系统,可以支持最多10个用户进行网络会议,参与会议的用户可以共享桌面、应用程序、文件、幻灯片以及其它内容.下面就是WMS十大主要功能和特点.

  5. A Milli-Window to Another World

    CERN Document Server

    Izaguirre, Eder

    2015-01-01

    The kinetic mixing of the vector boson of hypercharge with the vector boson(s) associated with particle sectors beyond the Standard Model is one of the best motivated windows to new physics. The resulting phenomenology depends on whether the new vector boson is massive or massless. The phenomenology associated with the massive phase has received considerable attention in recent years with many theoretical explorations and new experimental efforts, while the massless phase is linked to the phenomenology of milli-charged particles. In this paper we introduce the more general case where the kinetic mixing is with a vector boson that is a linear combination of both a massive and a massless state (as hypercharge is in the Standard Model). We demonstrate that the general phase is only weakly constrained when the mass scale associated with it is above about 100 MeV. Finally, we show that a new dedicated experiment at the LHC, proposed recently in Ref. [1], can explore large parts of the parameter space in the mass r...

  6. Taian Companion Machinery Co.,Ltd:Seize Opportunities Relying on Self-Intellectual Innovatio

    Institute of Scientific and Technical Information of China (English)

    Sherry Liu

    2011-01-01

    Since its first participation of ShanghaiTex 2011 last year,Companion Machinery Co.,Ltd hasmade an important step,"letting theworld know Companion Machinery,and making Companion Machinery go outside" by upholding concepts of "Being friends, partners and collaborators".

  7. 40 CFR 180.521 - Fumigants for grain-mill machinery; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Fumigants for grain-mill machinery... Tolerances § 180.521 Fumigants for grain-mill machinery; tolerances for residues. (a) General. Fumigants may be safely used in or on grain-mill machinery in accordance with the following prescribed...

  8. 76 FR 67181 - Windsor Machinery Co., Inc.; Notice of Preliminary Permit Application Accepted for Filing and...

    Science.gov (United States)

    2011-10-31

    ... Energy Regulatory Commission Windsor Machinery Co., Inc.; Notice of Preliminary Permit Application..., 2011, Windsor Machinery Co., Inc. filed an application for a preliminary permit, pursuant to section 4... an annual generation of 1,600 megawatt-hours. Applicant Contact: Sarah L. Bower, Windsor Machinery...

  9. 30 CFR 57.3460 - Maintenance between machinery or equipment and ribs.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maintenance between machinery or equipment and... NONMETAL MINES Ground Control Precautions-Underground Only § 57.3460 Maintenance between machinery or equipment and ribs. Persons shall not perform maintenance work between machinery or equipment and...

  10. 30 CFR 57.3430 - Activity between machinery or equipment and the highwall or bank.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Activity between machinery or equipment and the... AND NONMETAL MINES Ground Control Precautions-Surface Only § 57.3430 Activity between machinery or equipment and the highwall or bank. Persons shall not work or travel between machinery or equipment and...

  11. 46 CFR 196.15-15 - Examination of boilers and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Examination of boilers and machinery. 196.15-15 Section... VESSELS OPERATIONS Test, Drills, and Inspections § 196.15-15 Examination of boilers and machinery. (a) It shall be the duty of the chief engineer when he assumes charge of the boilers and machinery of a...

  12. 49 CFR 173.222 - Dangerous goods in equipment, machinery or apparatus.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Dangerous goods in equipment, machinery or... Than Class 1 and Class 7 § 173.222 Dangerous goods in equipment, machinery or apparatus. Hazardous materials in machinery or apparatus are excepted from the specification packaging requirements of...

  13. 46 CFR 62.50-30 - Additional requirements for periodically unattended machinery plants.

    Science.gov (United States)

    2010-10-01

    ... section 4-6-4/13.5 of the ABS Steel Vessel Rules (incorporated by reference; see 46 CFR 62.05-1). (d... machinery plants. 62.50-30 Section 62.50-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED... requirements for periodically unattended machinery plants. Note: Periodically unattended machinery...

  14. 49 CFR 393.130 - What are the rules for securing heavy vehicles, equipment and machinery?

    Science.gov (United States)

    2010-10-01

    ..., equipment and machinery? 393.130 Section 393.130 Transportation Other Regulations Relating to Transportation... heavy vehicles, equipment and machinery? (a) Applicability. The rules in this section apply to the transportation of heavy vehicles, equipment and machinery which operate on wheels or tracks, such as front...

  15. 33 CFR 150.620 - What are the requirements for protecting personnel from machinery?

    Science.gov (United States)

    2010-07-01

    ... machinery through the use of guard devices or other measures that comply with 29 CFR 1910.212, or through... protecting personnel from machinery? 150.620 Section 150.620 Navigation and Navigable Waters COAST GUARD... Health Machine Guards § 150.620 What are the requirements for protecting personnel from machinery?...

  16. 77 FR 64462 - Conference on International Trade Issues Facing U.S. Machinery Manufacturing Industries

    Science.gov (United States)

    2012-10-22

    ... Conference on International Trade Issues Facing U.S. Machinery Manufacturing Industries AGENCY: Manufacturing... December 4, 2012 the Office of Transportation and Machinery will hold a one-day conference on bi-lateral and multi-lateral international trade issues impacting the U.S. machinery manufacturing...

  17. 46 CFR 97.15-15 - Examination of boilers and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Examination of boilers and machinery. 97.15-15 Section... VESSELS OPERATIONS Tests, Drills, and Inspections § 97.15-15 Examination of boilers and machinery. It shall be the duty of the chief engineer when assuming charge of the boilers and machinery of a vessel...

  18. 30 CFR 77.404 - Machinery and equipment; operation and maintenance.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Machinery and equipment; operation and... OF UNDERGROUND COAL MINES Safeguards for Mechanical Equipment § 77.404 Machinery and equipment; operation and maintenance. (a) Mobile and stationary machinery and equipment shall be maintained in...

  19. 46 CFR 78.17-30 - Examination of boilers and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Examination of boilers and machinery. 78.17-30 Section... OPERATIONS Tests, Drills, and Inspections § 78.17-30 Examination of boilers and machinery. It shall be the duty of the chief engineer when assuming charge of the boilers and machinery of a vessel to...

  20. 30 CFR 56.3430 - Activity between machinery or equipment and the highwall or bank.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Activity between machinery or equipment and the... NONMETAL MINES Ground Control Precautions § 56.3430 Activity between machinery or equipment and the highwall or bank. Persons shall not work or travel between machinery or equipment and the highwall or...

  1. 46 CFR 167.65-60 - Examination of boilers and machinery by engineer.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Examination of boilers and machinery by engineer. 167.65... machinery by engineer. It shall be the duty of an engineer when he assumes charge of the boilers and machinery of a nautical school ship to examine the same forthwith and thoroughly, and if he finds any...

  2. 46 CFR 32.35-1 - Boilers and machinery-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Boilers and machinery-TB/ALL. 32.35-1 Section 32.35-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Main and Auxiliary Machinery § 32.35-1 Boilers and machinery—TB/ALL. Boilers, main and...

  3. The trend of German packaging machinery design%德国包装机械设计趋势

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Germany, the US, Japan and Italy are among the world big packaging machinery countries. The German packaging machinery takes the lead in the fields of design, manufacture and technical performance. German packaging machinery valued at Euro 3.4 billion in 2002.70%of the European packaging machinery is made by Germany. Germany exports 77% packaging machinery; amounting to 29% of the export market of the world packaging machinery.

  4. Glass-windowed ultrasound transducers.

    Science.gov (United States)

    Yddal, Tostein; Gilja, Odd Helge; Cochran, Sandy; Postema, Michiel; Kotopoulis, Spiros

    2016-05-01

    In research and industrial processes, it is increasingly common practice to combine multiple measurement modalities. Nevertheless, experimental tools that allow the co-linear combination of optical and ultrasonic transmission have rarely been reported. The aim of this study was to develop and characterise a water-matched ultrasound transducer architecture using standard components, with a central optical window larger than 10 mm in diameter allowing for optical transmission. The window can be used to place illumination or imaging apparatus such as light guides, miniature cameras, or microscope objectives, simplifying experimental setups. Four design variations of a basic architecture were fabricated and characterised with the objective to assess whether the variations influence the acoustic output. The basic architecture consisted of a piezoelectric ring and a glass disc, with an aluminium casing. The designs differed in piezoelectric element dimensions: inner diameter, ID=10 mm, outer diameter, OD=25 mm, thickness, TH=4 mm or ID=20 mm, OD=40 mm, TH=5 mm; glass disc dimensions OD=20-50 mm, TH=2-4 mm; and details of assembly. The transducers' frequency responses were characterised using electrical impedance spectroscopy and pulse-echo measurements, the acoustic propagation pattern using acoustic pressure field scans, the acoustic power output using radiation force balance measurements, and the acoustic pressure using a needle hydrophone. Depending on the design and piezoelectric element dimensions, the resonance frequency was in the range 350-630 kHz, the -6 dB bandwidth was in the range 87-97%, acoustic output power exceeded 1 W, and acoustic pressure exceeded 1 MPa peak-to-peak. 3D stress simulations were performed to predict the isostatic pressure required to induce material failure and 4D acoustic simulations. The pressure simulations indicated that specific design variations could sustain isostatic pressures up to 4.8 MPa.The acoustic simulations were able to

  5. Human Machine Interaction by Simulation of Dynamics of Construction Machinery

    DEFF Research Database (Denmark)

    Langer, Thomas Heegaard

    This industrial Ph.D. project concerns whole-body vibrations in human operated construction machinery. The emissions of these vibrations is closely related to the subjective experience of comfort and in some cases these vibrations can occur in a level which can cause the operator back disorders...... on long term basis. Whole-body vibrations are potential damaging for the human operator in a frequency range for which the dynamics of the machines are dominated by the inputs of the operator. The objective of this project is to reduce the amount of potential damaging wholebody vibrations for two...... different kinds of machinery; an articulated backhoe loader and an articulated dump truck. In this work a standardized procedure containing a set of duty cycles for measuring and declaring whole-body vibrations has been proposed for both of these machines. The result of the measuring is important...

  6. Manifold learning-based subspace distance for machinery damage assessment

    Science.gov (United States)

    Sun, Chuang; Zhang, Zhousuo; He, Zhengjia; Shen, Zhongjie; Chen, Binqiang

    2016-03-01

    Damage assessment is very meaningful to keep safety and reliability of machinery components, and vibration analysis is an effective way to carry out the damage assessment. In this paper, a damage index is designed by performing manifold distance analysis on vibration signal. To calculate the index, vibration signal is collected firstly, and feature extraction is carried out to obtain statistical features that can capture signal characteristics comprehensively. Then, manifold learning algorithm is utilized to decompose feature matrix to be a subspace, that is, manifold subspace. The manifold learning algorithm seeks to keep local relationship of the feature matrix, which is more meaningful for damage assessment. Finally, Grassmann distance between manifold subspaces is defined as a damage index. The Grassmann distance reflecting manifold structure is a suitable metric to measure distance between subspaces in the manifold. The defined damage index is applied to damage assessment of a rotor and the bearing, and the result validates its effectiveness for damage assessment of machinery component.

  7. Remote detection of rotating machinery with a portable atomic magnetometer.

    Science.gov (United States)

    Marmugi, Luca; Gori, Lorenzo; Hussain, Sarah; Deans, Cameron; Renzoni, Ferruccio

    2017-01-20

    We demonstrate remote detection of rotating machinery, using an atomic magnetometer at room temperature and in an unshielded environment. The system relies on the coupling of the AC magnetic signature of the target with the spin-polarized, precessing atomic vapor of a radio-frequency optical atomic magnetometer. The AC magnetic signatures of rotating equipment or electric motors appear as sidebands in the power spectrum of the atomic sensor, which can be tuned to avoid noisy bands that would otherwise hamper detection. A portable apparatus is implemented and experimentally tested. Proof-of-concept investigations are performed with test targets mimicking possible applications, and the operational conditions for optimum detection are determined. Our instrument provides comparable or better performance than a commercial fluxgate and allows detection of rotating machinery behind a wall. These results demonstrate the potential for ultrasensitive devices for remote industrial and usage monitoring, security, and surveillance.

  8. B2B Marketing in the Flexographic Machinery Industry

    OpenAIRE

    Verner, Jan

    2012-01-01

    Soma Engineering, Czech engineering company, designed its new marketing strategy in order to succeed amongst its competitors in the flexographic machinery market. Goal of the thesis is to verify if the new marketing strategy of SOMA engineering leads to desired positioning of the company and its products in selected markets. In case, the research indicates that the strategy does not work, identify the areas/attributes where the company lacks behind the desired positioning. Desired positioning...

  9. The Diagnosis of Reciprocating Machinery by Bayesian Networks

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    A Bayesian Network is a reasoning tool based on probability theory and has many advantages that other reasoning tools do not have. This paper discusses the basic theory of Bayesian networks and studies the problems in constructing Bayesian networks. The paper also constructs a Bayesian diagnosis network of a reciprocating compressor. The example helps us to draw a conclusion that Bayesian diagnosis networks can diagnose reciprocating machinery effectively.

  10. Abrasive Wear of Alloyed Cast Steels Applied for Heavy Machinery

    Directory of Open Access Journals (Sweden)

    Studnicki A.

    2015-03-01

    Full Text Available In the paper the results and analysis of abrasive wear studies were shown for two grades of cast steels: low-alloyed cast steel applied for heavy machinery parts such as housing, covers etc. and chromium cast steels applied for kinetic nodes of pin-sleeve type. Studies were performed using the modified in Department of Foundry pin-on-disc method.

  11. A Study of Sugarcane Leaf-Removal Machinery during Harvest

    Directory of Open Access Journals (Sweden)

    Sopa Cansee

    2010-01-01

    Full Text Available Problem statement: Sugarcane leaf-removing tools could help speed up sugarcane harvest and reduce contamination. Moreover, leaf-removal machinery can solve the problems of sugarcane burning and workers can increase sugarcane harvest production too. The purpose of this research was to study the use of leaf-removal machinery in the post-harvest production of sugarcane to reduce harvest production time and contaminant. Approach: This study focused on the LK92-11 variety of sugarcane having a harvesting period of 12 months, a density of 9,387 stems/rai and could produce 14.01 tons/rai including cane top and, leaves and leaf sheaths of 1675.2 and 180 kg/rai. Sugarcane leaf-removal machinery was applied to a small engine power from a grass-cutting machine. A rotate dish applied 4 different materials, tendon string, soft wire, medium wire and sling for sugarcane leaf-removing. The machine was operated at a constant speed. The efficiency of the sugarcane leaf-removal machinery indicated the capacity of sugarcane leaf-removing by area and operation time. Results: The quantity of leaves and leaf sheaths affect the speed of harvest production. Moreover, leaves and leaf sheaths increase the waste material in production and also contaminate the sugar and the sugar production system with clay, sand, and mud from the fields. Traditional methods for sugarcane harvest without removing leaf took 37 h/rai to complete, but sugarcane leaf-removing could reduce the sugarcane harvest process to 11.4 h/rai. Conclusion: The material of the blades in de-leafing machine is crucial to the efficiency of harvest production time. Blades made from poor materials can cause tangling and clogging in the rotator dish, which increases maintenance time. Further developments in sugarcane leaf removal systems will create dramatic improvement in sugarcane production.

  12. siRNA machinery in whitefly (Bemisia tabaci).

    Science.gov (United States)

    Upadhyay, Santosh Kumar; Dixit, Sameer; Sharma, Shailesh; Singh, Harpal; Kumar, Jitesh; Verma, Praveen C; Chandrashekar, K

    2013-01-01

    RNA interference has been emerged as an utmost tool for the control of sap sucking insect pests. Systemic response is necessary to control them in field condition. Whitefly is observed to be more prone to siRNA in recent studies, however the siRNA machinery and mechanism is not well established. To identify the core siRNA machinery, we curated transcriptome data of whitefly from NCBI database. Partial mRNA sequences encoding Dicer2, R2D2, Argonaute2 and Sid1 were identified by tblastn search of homologous sequences from Aphis glycines and Tribolium castaneum. Complete encoding sequences were obtained by RACE, protein sequences derived by Expasy translate tool and confirmed by blastp analysis. Conserved domain search and Prosite-Scan showed similar domain architecture as reported in homologs from related insects. We found helicase, PAZ, RNaseIIIa, RNaseIIIb and double-stranded RNA-binding fold (DSRBF) in Dicer2; DsRBD in R2D2; and PAZ and PIWI domains in Argonaute2. Eleven transmembrane domains were detected in Sid1. Sequence homology and phylogenetic analysis revealed that RNAi machinery of whitefly is close to Aphids. Real-time PCR analysis showed similar expression of these genes in different developmental stages as reported in A. glycines and T. castaneum. Further, the expression level of above genes was quite similar to the housekeeping gene actin. Availability of core siRNA machinery including the Sid1 and their universal expression in reasonable quantity indicated significant response of whitefly towards siRNA. Present report opens the way for controlling whitefly, one of the most destructive crop insect pest.

  13. Performance of machinery in potato production in one growing season

    Directory of Open Access Journals (Sweden)

    Kun Zhou

    2015-12-01

    Full Text Available Statistics on the machinery performance are essential for farm managers to make better decisions. In this paper, the performance of all machineries in five sequential operations, namely bed forming, stone separation, planting, spraying and harvesting in the potato production system, were investigated during one growing season. In order to analyse and decompose the recorded GPS data into various time and distance elements for estimation of the machinery performance, an automatic GPS analysis tool was developed. The field efficiency and field capacity were estimated for each operation. Specifically, the measured average field efficiency was 71.3% for bed forming, 68.5% for stone separation, 40.3% for planting, 69.7% for spraying, and 67.4% for harvesting. The measured average field capacities were 1.46 ha/h, 0.53 ha/h, 0.47 ha/h, 10.21 ha/h, 0.51 ha/h, for the bed forming, stone separation, planting, spraying, and harvesting operations, respectively. These results deviate from the corresponding estimations calculated based on norm data from the American Society of Agricultural and Biological Engineers (ASABE. The deviations indicate that norms provided by ASABE cannot be used directly for the prediction of performance of the machinery used in this work. Moreover, the measured data of bed forming and stone separation could be used as supplementary data for the ASABE which does not provide performance norms for these two operations. The gained results can help farm managers to make better management and operational decisions that result in potential improvement in productivity and profitability as well as in potential environmental benefits.

  14. Construction Machinery as Sensors in Internet of Things

    OpenAIRE

    Stopar, Gregor

    2016-01-01

    In diploma thesis we will make an overview of the field of internet of things with a focus on its use in industry. We will overview cloud services aswell and its integration with internet of things. We will implement a system which uses both technologies and serves as a control system for construction machinery, where we will present chosen components, technologies, protocols and design of system. We will create an embedded system with sensors for gathering information from machines and sendi...

  15. Performance of machinery in potato production in one growing season

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, K.; Jensen, A.L.; Bochtis, D.D.; Sørensen, C.G.

    2015-07-01

    Statistics on the machinery performance are essential for farm managers to make better decisions. In this paper, the performance of all machineries in five sequential operations, namely bed forming, stone separation, planting, spraying and harvesting in the potato production system, were investigated during one growing season. In order to analyse and decompose the recorded GPS data into various time and distance elements for estimation of the machinery performance, an automatic GPS analysis tool was developed. The field efficiency and field capacity were estimated for each operation. Specifically, the measured average field efficiency was 71.3% for bed forming, 68.5% for stone separation, 40.3% for planting, 69.7% for spraying, and 67.4% for harvesting. The measured average field capacities were 1.46 ha/h, 0.53 ha/h, 0.47 ha/h, 10.21 ha/h, 0.51 ha/h, for the bed forming, stone separation, planting, spraying, and harvesting operations, respectively. These results deviate from the corresponding estimations calculated based on norm data from the American Society of Agricultural and Biological Engineers (ASABE). The deviations indicate that norms provided by ASABE cannot be used directly for the prediction of performance of the machinery used in this work. Moreover, the measured data of bed forming and stone separation could be used as supplementary data for the ASABE which does not provide performance norms for these two operations. The gained results can help farm managers to make better management and operational decisions that result in potential improvement in productivity and profitability as well as in potential environmental benefits. (Author)

  16. Government Doc.: Guideline for Chinese Textile Machinery Industry

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ Editor's note: Ministry of Industry and Information Technology(MIIT)has issued an instructive guideline for the development of textile machinery industry in China in an effort to cope with the impact of financial crisis and elaborate on its support for the specific area of interest in promoting this industry in the days to come.This document is taken as an guidebook for textile players to know where this industry will go,and what goals to reach.

  17. Dedicated monitoring and machinery protection systems on reciprocating compressors

    Energy Technology Data Exchange (ETDEWEB)

    Grande, Alvaro; Wenisch, Markus [Hoerbiger Ventilwerke GmbH and Co KG, Wien (Austria); Jacobs, Denis [HOERBIGER do Brasil Industria de Equipamentos, Cajamar, SP (Brazil)

    2012-07-01

    Growing demands on reciprocating compressors (recips) in the process gas industry require particular solutions for machinery protection and performance monitoring systems. Compared to rotating equipment, monitoring systems for recips have to consider the special mechanical and physical characteristics, such as oscillating masses, variable vibration behaviour and varying operating conditions. Furthermore, they provide valuable information about the performance of cylinder related components allowing the operator the optimization of efficiency and availability, and therefore increase production. (author)

  18. Handheld White Light Interferometer for Measuring Defect Depth in Windows

    Science.gov (United States)

    Youngquist, Robert; Simmons, Stephen; Cox, Robert

    2010-01-01

    Accurate quantification of defects (scratches and impacts) is vital to the certification of flight hardware and other critical components. The amount of damage to a particular component contributes to the performance, reliability, and safety of a system, which ultimately affects the success or failure of a mission or test. The launch-commit criteria on a Space Shuttle Orbiter window are governed by the depth of the defects that are identified by a visual inspection. This measurement of a defect is not easy to obtain given the environment, size of the defect, and location of the window(s). The determination of depth has typically been performed by taking a mold impression and measuring the impression with an optical profiling instrument. Another method of obtaining an estimate of the depth is by using a refocus microscope. To use a refocus microscope, the surface of the glass and bottom of the defect are, in turn, brought into focus by the operator. The amount of movement between the two points corresponds to the depth of the defect. The refocus microscope requires a skilled operator and has been proven to be unreliable when used on Orbiter windows. White light interferometry was chosen as a candidate to replace the refocus microscope. The White Light Interferometer (WLI) was developed to replace the refocus microscope as the instrument used for measuring the depth of defects in Orbiter windows. The WLI consists of a broadband illumination source, interferometer, detector, motion control, displacement sensor, mechanical housing, and support electronics. The illumination source for the WLI is typically a visible light emitting diode (LED) or a near-infrared superluminescent diode (SLD) with power levels of less than a milliwatt. The interferometer is a Michelson configuration consisting of a 1-in. (2.5-cm) cube beam splitter, a 0.5-in. (1.3-cm) optical window as a movable leg (used to closely match the return intensity of the fixed leg from the window), and a

  19. Automatic Water Sensor Window Opening System

    KAUST Repository

    Percher, Michael

    2013-12-05

    A system can automatically open at least one window of a vehicle when the vehicle is being submerged in water. The system can include a water collector and a water sensor, and when the water sensor detects water in the water collector, at least one window of the vehicle opens.

  20. Windows Azure Blob Storage来存储Windows Phone App数据%To Store Windows Phone App Data using Windows Azure Blob Storage

    Institute of Scientific and Technical Information of China (English)

    高建

    2015-01-01

    Cloud computing and storage is replacing the traditional web site hosting, while mobile phone application is getting used by more people. There are several different cloud computing solutions and different mobile phone operating system. Microsoft’s cloud platform is Windows Azure, while its mobile phone operating system is Windows Phone. How to store Windows Phone App data in Windows Azure Blob Storage is discussed in this paper.%云计算和云存储正在替代以前的网站和应用空间,而手机APP正比桌面软件占用人们更多的访问数据和信息的时间,现在有不同的云服务和手机应用平台。微软公司的云服务平台为Windows Azure,其手机操作系统为Windows Phone,探讨了如何用Windows Azure Blob Storage来存储Windows Phone App的数据。

  1. Thermal Bridge Effects in Window Grooves

    DEFF Research Database (Denmark)

    Rose, Jørgen

    1997-01-01

    In this report thermal bridge effects in window grooves are analyzed. The analysis is performed using different thicknesses of the window groove insulation, to evaluate what the optimal solution is.All analysis in the report is performed using both 2- and 3-dimensional numerical analysis....

  2. Measured Rattle Threshold of Residential House Windows

    Science.gov (United States)

    Sizov, Natalia; Schultz, Troy; Hobbs, Christopher; Klos, Jacob

    2008-01-01

    Window rattle is a common indoor noise effect in houses exposed to low frequency noise from such sources as railroads, blast noise and sonic boom. Human perception of rattle can be negative that is a motivating factor of the current research effort to study sonic boom induced window rattle. A rattle study has been conducted on residential houses containing windows of different construction at a variety of geographic locations within the United States. Windows in these houses were excited by a portable, high-powered loudspeaker and enclosure specifically designed to be mounted on the house exterior to cover an entire window. Window vibration was measured with accelerometers placed on different window components. Reference microphones were also placed inside the house and inside of the loudspeaker box. Swept sine excitation was used to identify the vibration threshold at which the response of the structure becomes non-linear and begins to rattle. Initial results from this study are presented and discussed. Future efforts will continue to explore the rattle occurrence in windows of residential houses exposed to sonic booms.

  3. Tactical/Combat Engines Cetane Window Evaluation

    Science.gov (United States)

    2013-01-31

    custom diesel fuels typically used in Homogeneous Charge Coupled Ignition ( HCCI ) research engines . These fuels are characterized by a very heavy...UNCLASSIFIED TACTICAL/COMBAT ENGINES CETANE WINDOW EVALUATION INTERIM REPORT TFLRF No. 436 by Gregory A. Hansen, Douglas Yost...report when no longer needed. Do not return it to the originator. UNCLASSIFIED UNCLASSIFIED TACTICAL/COMBAT ENGINES CETANE WINDOW

  4. Humeral windows in revision total elbow arthroplasty

    Science.gov (United States)

    Salama, Amir; Stanley, David

    2016-01-01

    The use of cortical windows for revision elbow arthroplasty has not previously been widely reported. Their use aids safe revision of a well fixed humeral prosthesis and can be used in the setting of dislocation, periprosthetic fracture or aseptic loosening of the ulnar component. We describe our technique and results of cortical windows in the distal humerus for revision elbow arthroplasty surgery. PMID:27583011

  5. Measure Guideline: Window Repair, Rehabilitation, and Replacement

    Energy Technology Data Exchange (ETDEWEB)

    Baker, P.

    2012-12-01

    This measure guideline provides information and guidance on rehabilitating, retrofitting, and replacing existing window assemblies in residential construction. The intent is to provide information regarding means and methods to improve the energy and comfort performance of existing wood window assemblies in a way that takes into consideration component durability, in-service operation, and long term performance of the strategies.

  6. Location of an acoustic window in dolphins.

    Science.gov (United States)

    Popov, V V; Supin, A Y

    1990-01-15

    Auditory brainstem responses (ABR) to sound clicks from sources in different positions were recorded in dolphins Inia geoffrensis. The position of the acoustic window was determined by measurement of acoustic delays. The acoustic window was found to lie close to the auditory meatus and the bulla rather than on the lower jaw.

  7. What are windows on language evolution?

    NARCIS (Netherlands)

    Botha, Rudolf

    This chapter offers an elucidation of the idea that certain phenomena provide windows on language evolution. Non-metaphorically, such windows are shown to be conceptual constructs used for making inferences about aspects of language evolution from data or assumptions about properties of

  8. Characteristics of Air Flow through Windows

    DEFF Research Database (Denmark)

    Heiselberg, Per; Dam, Henrik; Sørensen, Lars C.

    This paper describes the first results of a series of laboratory investigations that is performed to characterise three different window types. The results show the air flow conditions for different ventilation strategies and temperature differences. For one of the windows values of the discharge...

  9. Supporting Multiple Pointing Devices in Microsoft Windows

    DEFF Research Database (Denmark)

    Westergaard, Michael

    2002-01-01

    In this paper the implementation of a Microsoft Windows driver including APIs supporting multiple pointing devices is presented. Microsoft Windows does not natively support multiple pointing devices controlling independent cursors, and a number of solutions to this have been implemented by us...

  10. European energy labelling scheme for windows

    Energy Technology Data Exchange (ETDEWEB)

    Belling Skou, Mette (VELUX A/S (Denmark)); Kragh, Jesper (DTU Byg, Denmarks Tekniske Univ., Lyngby (Denmark))

    2009-07-01

    In their proposals for revision of the energy labelling directive the European Commission has suggested to include windows. The paper introduces a proposal for an European energy labelling scheme of windows for replacement of windows in the existing building stock taking into consideration the energy performance of windows in both the heating and cooling seasons. The labelling scheme evaluates a methodology where the energy performance in the heating period is established with focus on heat loss and utilization of passive solar energy, whereas the energy performance in the summer (cooling) season will focus on reduction of solar radiation into the building. The methodology is developed with focus on CEN and ISO standardization. With inspiration from the American Energy Star programme for windows, Europe is divided into climate zones where the methodology for each zone is developed on basis of a reference building and climate data. A proposal for labelling will be presented for both heating and cooling seasons in order to enable the user to choose the right product for a specific performance. Based on data from the building stock in the individual climate zones, an energy saving potential for replacement of old windows with new low energy windows will be presented. The possibility for using energy labelling of windows as reference and requirement in the building legislation as an alternative to U-values, will be presented with among others examples from legislation in UK and Denmark.

  11. Supporting Multiple Pointing Devices in Microsoft Windows

    DEFF Research Database (Denmark)

    Westergaard, Michael

    2002-01-01

    In this paper the implementation of a Microsoft Windows driver including APIs supporting multiple pointing devices is presented. Microsoft Windows does not natively support multiple pointing devices controlling independent cursors, and a number of solutions to this have been implemented by us...

  12. Spatiotemporal Regulation of Nuclear Transport Machinery and Microtubule Organization

    Directory of Open Access Journals (Sweden)

    Naoyuki Okada

    2015-08-01

    Full Text Available Spindle microtubules capture and segregate chromosomes and, therefore, their assembly is an essential event in mitosis. To carry out their mission, many key players for microtubule formation need to be strictly orchestrated. Particularly, proteins that assemble the spindle need to be translocated at appropriate sites during mitosis. A small GTPase (hydrolase enzyme of guanosine triphosphate, Ran, controls this translocation. Ran plays many roles in many cellular events: nucleocytoplasmic shuttling through the nuclear envelope, assembly of the mitotic spindle, and reorganization of the nuclear envelope at the mitotic exit. Although these events are seemingly distinct, recent studies demonstrate that the mechanisms underlying these phenomena are substantially the same as explained by molecular interplay of the master regulator Ran, the transport factor importin, and its cargo proteins. Our review focuses on how the transport machinery regulates mitotic progression of cells. We summarize translocation mechanisms governed by Ran and its regulatory proteins, and particularly focus on Ran-GTP targets in fission yeast that promote spindle formation. We also discuss the coordination of the spatial and temporal regulation of proteins from the viewpoint of transport machinery. We propose that the transport machinery is an essential key that couples the spatial and temporal events in cells.

  13. On the reversed Brayton cycle with high speed machinery

    Energy Technology Data Exchange (ETDEWEB)

    Backman, J.

    1996-12-31

    This work was carried out in the laboratory of Fluid Dynamics, at Lappeenranta University of Technology during the years 1991-1996. The research was a part of larger high speed technology development research. First, there was the idea of making high speed machinery applications with the Brayton cycle. There was a clear need to deepen the knowledge of the cycle itself and to make a new approach in the field of the research. Also, the removal of water from the humid air seemed very interesting. The goal of this work was to study methods of designing high speed machinery for the reversed Brayton cycle, from theoretical principles to practical applications. The reversed Brayton cycle can be employed as an air dryer, a heat pump or a refrigerating machine. In this research the use of humid air as a working fluid has an environmental advantage, as well. A new calculation method for the Brayton cycle is developed. In this method especially the expansion process in the turbine is important because of the condensation of the water vapour in the humid air. This physical phenomena can have significant effects on the level of performance of the application. Also, the influence of calculating the process with actual, achievable process equipment efficiencies is essential for the development of future machinery. The above theoretical calculations are confirmed with two different laboratory prototypes. (53 refs.)

  14. Assembly of the bacterial type III secretion machinery.

    Science.gov (United States)

    Diepold, Andreas; Wagner, Samuel

    2014-07-01

    Many bacteria that live in contact with eukaryotic hosts, whether as symbionts or as pathogens, have evolved mechanisms that manipulate host cell behaviour to their benefit. One such mechanism, the type III secretion system, is employed by Gram-negative bacterial species to inject effector proteins into host cells. This function is reflected by the overall shape of the machinery, which resembles a molecular syringe. Despite the simplicity of the concept, the type III secretion system is one of the most complex known bacterial nanomachines, incorporating one to more than hundred copies of up to twenty different proteins into a multi-MDa transmembrane complex. The structural core of the system is the so-called needle complex that spans the bacterial cell envelope as a tripartite ring system and culminates in a needle protruding from the bacterial cell surface. Substrate targeting and translocation are accomplished by an export machinery consisting of various inner membrane embedded and cytoplasmic components. The formation of such a multimembrane-spanning machinery is an intricate task that requires precise orchestration. This review gives an overview of recent findings on the assembly of type III secretion machines, discusses quality control and recycling of the system and proposes an integrated assembly model.

  15. Android is the new Windows

    CERN Multimedia

    Computer Security Team

    2013-01-01

    Do you recall the early virus attacks in the early 2000s? “Blaster”, “I love you” and “Slammer” were attacking the pretty much unprotected Microsoft Windows operating system.   While Microsoft has been hit hard in the past, they have tried to improve and are now on a par with other software vendors. Today, they can even be happy that Android is taking over the baton - at least on mobile platforms. According to the Sophos 2013 Security Threat Report “Android [is] today’s the biggest target” and Android devices in Australia and the U.S. experienced even more malware attacks, whether successful or unsuccessful, than PCs during the past three months. The Kaspersky security company recently added that 99% of all mobile threats target Android. Lucky you if you use an iPhone, or a good old Nokia with no Internet connectivity at all. But why is that? It is partly down to the same fac...

  16. AGB variables in Baade's windows

    CERN Document Server

    Schultheis, M

    2001-01-01

    In this work, a sample of luminous M-type giants in the Baade's Windows towards the inner Galactic Bulge is investigated in the near-infrared. The ISOGAL survey at 7 and 15 micron has given information concerning the mass-loss rates of these stars and their variability characteristics have been extracted from the MACHO database. Most are known to be semi-regular variables (SRVs). Here we discuss how their IJHK-region colours depend on period and the presence or absence of mass-loss, using results mainly taken from the DENIS and 2MASS surveys. In order to compare their colours with solar neighbourhood stars, photometric colours on the DENIS, 2MASS and ESO photometric systems have been synthesized for objects in the spectrophotometric atlas of Lancon and Wood (2000). In addition, they have been used to predict the differences in colour indicies when stars with strong molecular bands are observed using different photometric systems. The SRVs are found to inhabit the upper end of the J-K, K colour-magnitude diagr...

  17. How to Green Windows Update?

    Directory of Open Access Journals (Sweden)

    Seifedine Kadry

    2012-11-01

    Full Text Available The most important challenges facing the earth in the future are energy, water, environment and food security, Green IT contributes in significant role in finding solutions because it consume energy more efficient and reduce pollution in water, air and soil in addition to improving economy because Green IT is manage energy sources by reducing energy consumption with good performance. Most of energy consumed around the world depends on non-renewable energy and part of this energy consumed to update technologies In this paper ,we will study one of the most important tools in Microsoft, which is used in order to help users to get updates of Microsoft's products, which is called windows server update services (WSUS, which is helping to reduce energy consumption, we will study this tool and then try to make it more green by reducing the send / receive between Microsoft Update (MU and WSUS, which will reduce energy consumption, and we will propose algorithm and compared the energy consumption in the current design with energy consumption in the proposed design. This design will open the way for future work in order to make sending updates in MU less energy consumption by apply conditional sending and that will help to improve the performance of MU added to improve the network performance with more efficient consumption of energy.

  18. A monolithic thin film electrochromic window

    Energy Technology Data Exchange (ETDEWEB)

    Goldner, R.B.; Arntz, F.O.; Berera, G.; Haas, T.E.; Wong, K.K. (Tufts Univ., Medford, MA (United States). Electro-Optics Technology Center); Wei, G. (Mobil Solar Energy Corp., Billerica, MA (United States)); Yu, P.C. (PPG Industries, Inc., Monroeville, PA (United States))

    1991-01-01

    Three closely related thin film solid state ionic devices that are potentially important for applications are: electrochromic smart windows, high energy density thin film rechargeable batteries, and thin film electrochemical sensors. Each usually has at least on mixed ion/electron conductor, an electron-blocking ion conductor, and an ion-blocking electron conductor, and many of the technical issues associated with thin film solid state ionics are common to all three devices. Since the electrochromic window has the added technical requirement of electrically-controlled optical modulation, (over the solar spectrum), and since research at the authors' institution has focused primarily on the window structure, this paper will address the electrochromic window, and particularly a monolithic variable reflectivity electrochromic window, as an illustrative example of some of the challenges and opportunities that are confronting the thin film solid state ionics community. 33 refs.

  19. A monolithic thin film electrochromic window

    Energy Technology Data Exchange (ETDEWEB)

    Goldner, R.B.; Arntz, F.O.; Berera, G.; Haas, T.E.; Wong, K.K. [Tufts Univ., Medford, MA (United States). Electro-Optics Technology Center; Wei, G. [Mobil Solar Energy Corp., Billerica, MA (United States); Yu, P.C. [PPG Industries, Inc., Monroeville, PA (United States)

    1991-12-31

    Three closely related thin film solid state ionic devices that are potentially important for applications are: electrochromic smart windows, high energy density thin film rechargeable batteries, and thin film electrochemical sensors. Each usually has at least on mixed ion/electron conductor, an electron-blocking ion conductor, and an ion-blocking electron conductor, and many of the technical issues associated with thin film solid state ionics are common to all three devices. Since the electrochromic window has the added technical requirement of electrically-controlled optical modulation, (over the solar spectrum), and since research at the authors` institution has focused primarily on the window structure, this paper will address the electrochromic window, and particularly a monolithic variable reflectivity electrochromic window, as an illustrative example of some of the challenges and opportunities that are confronting the thin film solid state ionics community. 33 refs.

  20. Windows 8 app projects XAML and C#

    CERN Document Server

    Vermeir, Nico

    2013-01-01

    Become a leading Windows 8 app developer by using Windows 8 App Projects - XAML and C# Edition to learn techniques, tools, and ideas to create successful, 5-star apps. Windows 8 App Projects - XAML and C# Edition shows you the nuts and bolts of the Windows 8 development ecosystem. Then, through a series of example driven chapters, you'll discover how to leverage the platform's unique features. With each project, you'll be one step closer to building full-featured, responsive, and well designed apps that feel like they're a part of the operating system. Windows 8 App Projects - XAML and C# Edit

  1. NASA Space Astronomy Update 6: Unconventional Windows on the Universe

    Science.gov (United States)

    1992-01-01

    Professor Stu Bowyer (University of California at Berkeley) explains the Extreme Ultraviolet Explorer and its telescope in this video. Both instrument and satellite are kept in perfect working condition. The satellite picks up extra galactic objects outside our galaxy.

  2. Whole heart coronary imaging with flexible acquisition window and trigger delay.

    Directory of Open Access Journals (Sweden)

    Keigo Kawaji

    Full Text Available Coronary magnetic resonance imaging (MRI requires a correctly timed trigger delay derived from a scout cine scan to synchronize k-space acquisition with the quiescent period of the cardiac cycle. However, heart rate changes between breath-held cine and free-breathing coronary imaging may result in inaccurate timing errors. Additionally, the determined trigger delay may not reflect the period of minimal motion for both left and right coronary arteries or different segments. In this work, we present a whole-heart coronary imaging approach that allows flexible selection of the trigger delay timings by performing k-space sampling over an enlarged acquisition window. Our approach addresses coronary motion in an interactive manner by allowing the operator to determine the temporal window with minimal cardiac motion for each artery region. An electrocardiogram-gated, k-space segmented 3D radial stack-of-stars sequence that employs a custom rotation angle is developed. An interactive reconstruction and visualization platform is then employed to determine the subset of the enlarged acquisition window for minimal coronary motion. Coronary MRI was acquired on eight healthy subjects (5 male, mean age = 37 ± 18 years, where an enlarged acquisition window of 166-220 ms was set 50 ms prior to the scout-derived trigger delay. Coronary visualization and sharpness scores were compared between the standard 120 ms window set at the trigger delay, and those reconstructed using a manually adjusted window. The proposed method using manual adjustment was able to recover delineation of five mid and distal right coronary artery regions that were otherwise not visible from the standard window, and the sharpness scores improved in all coronary regions using the proposed method. This paper demonstrates the feasibility of a whole-heart coronary imaging approach that allows interactive selection of any subset of the enlarged acquisition window for a tailored reconstruction

  3. Whole heart coronary imaging with flexible acquisition window and trigger delay.

    Science.gov (United States)

    Kawaji, Keigo; Foppa, Murilo; Roujol, Sébastien; Akçakaya, Mehmet; Nezafat, Reza

    2015-01-01

    Coronary magnetic resonance imaging (MRI) requires a correctly timed trigger delay derived from a scout cine scan to synchronize k-space acquisition with the quiescent period of the cardiac cycle. However, heart rate changes between breath-held cine and free-breathing coronary imaging may result in inaccurate timing errors. Additionally, the determined trigger delay may not reflect the period of minimal motion for both left and right coronary arteries or different segments. In this work, we present a whole-heart coronary imaging approach that allows flexible selection of the trigger delay timings by performing k-space sampling over an enlarged acquisition window. Our approach addresses coronary motion in an interactive manner by allowing the operator to determine the temporal window with minimal cardiac motion for each artery region. An electrocardiogram-gated, k-space segmented 3D radial stack-of-stars sequence that employs a custom rotation angle is developed. An interactive reconstruction and visualization platform is then employed to determine the subset of the enlarged acquisition window for minimal coronary motion. Coronary MRI was acquired on eight healthy subjects (5 male, mean age = 37 ± 18 years), where an enlarged acquisition window of 166-220 ms was set 50 ms prior to the scout-derived trigger delay. Coronary visualization and sharpness scores were compared between the standard 120 ms window set at the trigger delay, and those reconstructed using a manually adjusted window. The proposed method using manual adjustment was able to recover delineation of five mid and distal right coronary artery regions that were otherwise not visible from the standard window, and the sharpness scores improved in all coronary regions using the proposed method. This paper demonstrates the feasibility of a whole-heart coronary imaging approach that allows interactive selection of any subset of the enlarged acquisition window for a tailored reconstruction for each branch

  4. Factors associated with small-scale agricultural machinery adoption in Bangladesh: Census findings.

    Science.gov (United States)

    Mottaleb, Khondoker Abdul; Krupnik, Timothy J; Erenstein, Olaf

    2016-08-01

    There is strong advocacy for agricultural machinery appropriate for smallholder farmers in South Asia. Such 'scale-appropriate' machinery can increase returns to land and labour, although the still substantial capital investment required can preclude smallholder ownership. Increasing machinery demand has resulted in relatively well-developed markets for rental services for tillage, irrigation, and post-harvest operations. Many smallholders thereby access agricultural machinery that may have otherwise been cost prohibitive to purchase through fee-for-service arrangements, though opportunity for expansion remains. To more effectively facilitate the development and investment in scale-appropriate machinery, there is a need to better understand the factors associated with agricultural machinery purchases and service provision. This paper first reviews Bangladesh's historical policy environment that facilitated the development of agricultural machinery markets. It then uses recent Bangladesh census data from 814,058 farm households to identify variables associated with the adoption of the most common smallholder agricultural machinery - irrigation pumps, threshers, and power tillers (mainly driven by two-wheel tractors). Multinomial probit model results indicate that machinery ownership is positively associated with household assets, credit availability, electrification, and road density. These findings suggest that donors and policy makers should focus not only on short-term projects to boost machinery adoption. Rather, sustained emphasis on improving physical and civil infrastructure and services, as well as assuring credit availability, is also necessary to create an enabling environment in which the adoption of scale-appropriate farm machinery is most likely.

  5. Efficient Adjustable Reflectivity Smart Window

    Energy Technology Data Exchange (ETDEWEB)

    D. Morgan Tench

    2005-12-01

    This project addressed the key technical issues for development of an efficient smart window based on reversible electrochemical transfer of silver between a mirror electrode and a localized counter electrode. Effort to provide uniform switching over large areas focused on use of a resistive transparent electrode innerlayer to increase the interelectrode resistance. An effective edge seal was developed in collaboration with adhesive suppliers and an electrochromic device manufacturer. Work to provide a manufacturable counter electrode focused on fabricating a dot matrix electrode without photolithography by electrodeposition of Pt nuclei on inherent active sites on a transparent oxide conductor. An alternative counter electrode based on a conducting polymer and an ionic liquid electrolyte was also investigated. Work in all of these areas was successful. Sputtered large-bandgap oxide innerlayers sandwiched between conductive indium tin oxide (ITO) layers were shown to provide sufficient cross-layer resistance (>300 ohm/cm{sup 2}) without significantly affecting the electrochemical properties of the ITO overlayer. Two edge seal epoxies, one procured from an epoxy manufacturer and one provided by an electrochromic device manufacturer in finished seals, were shown to be effective barriers against oxygen intrusion up to 80 C. The optimum density of nuclei for the dot matrix counter electrode was attained without use of photolithography by electrodeposition from a commercial alkaline platinum plating bath. Silver loss issues for cells with dot matrix electrodes were successfully addressed by purifying the electrolyte and adjusting the cell cycling parameters. More than 30K cycles were demonstrated for a REM cell (30-cm square) with a dot matrix counter electrode. Larger cells (30-cm square) were successfully fabricated but could not be cycled since the nucleation layers (provided by an outside supplier) were defective so that mirror deposits could not be produced.

  6. Risk assessments and safe machinery ensuring compliance with the EU directives

    CERN Document Server

    Jespen, Torben

    2016-01-01

    This book describes the prerequisites for the placing on the market and the safe use of machinery in compliance with the relevant EU Directives, especially the Machinery Directive 2006/42. It provides readers with high-level knowledge concerning the Essential Health and Safety Requirements (EHSR) that machinery must fulfill. The approach and principles of the Machinery Directive were most recently made worldwide acknowledged in the ILO code of practice on safe machinery, released in 2013. The book addresses that code, as well as providing valuable insight into other EU Product and Workplace legislation. Focusing on the key aspect of safe machinery, the “machinery safety risk assessment”, which allows readers to better understand the more difficult aspects of risk assessments, the book equips readers to tackle problems at the manufacturing stage and in different use scenarios, introducing them to risk reduction techniques and functional safety aspects.

  7. Applying Fused Silica and Other Transparent Window Materials in Aerospace Applications

    Science.gov (United States)

    Salem, Jon

    2017-01-01

    A variety of transparent ceramics, such as AlONs and spinels, that were developed for military applications hold promise as spacecraft windows. Window materials in spacecraft such as the Space Shuttle must meet many requirements such as maintaining cabin pressure, sustaining thermal shock, and tolerating damage from hyper-velocity impact while providing superior optical characteristics. The workhorse transparent material for space missions from Apollo to the International Space Station has been fused silica due in part to its low density, low coefficient of expansion and optical quality. Despite its successful use, fused silica exhibits lower fracture toughness and impact resistance as compared to newer materials. Can these newer transparent ceramics lighten spacecraft window systems and might they be useful for applications such as phone screens? This presentation will compare recent optical ceramics to fused silica and demonstrate how weight can be saved.

  8. AN INTRODUCTION TO WINDOWS 2000 AT CERN

    CERN Multimedia

    2001-01-01

    A demonstration of the new supported Windows environment for all the CERN personal computers (PC) will be given which is based on Windows 2000. This presentation will assume little or no familiarity with the PC, or NICE, and will concentrate on the services being offered to the users of PCs at CERN. How NICE 2000 can facilitate the work of all users, eventually becoming the key access point to all activities in the laboratory will be demonstrated. Date Title Language Location Speaker Fri 1/6 10:00 Une introduction à Windows 2000 au CERN F IT Auditorium (31/3-004) Alberto Pace Tue 5/6 10:00 Une introduction à Windows 2000 au CERN F LHC Auditorium (30/7th floor) Frederic Hemmer Tue 5/6 14:00 Une introduction à Windows 2000 au CERN F SL Auditorium (864/1s floor) Michel Bornand Tue 5/6 14:00 An introduction to Windows 2000 at CERN E IT Auditorium (31/3-004) Andreas Wagner Wed 6/6 14:00 Une introduction à Windows 2000 au CERN F SL ...

  9. Microsoft Windows Server 2012 administration instant reference

    CERN Document Server

    Hester, Matthew

    2013-01-01

    Fast, accurate answers for common Windows Server questions Serving as a perfect companion to all Windows Server books, this reference provides you with quick and easily searchable solutions to day-to-day challenges of Microsoft's newest version of Windows Server. Using helpful design features such as thumb tabs, tables of contents, and special heading treatments, this resource boasts a smooth and seamless approach to finding information. Plus, quick-reference tables and lists provide additional on-the-spot answers. Covers such key topics as server roles and functionality, u

  10. Teach yourself visually Windows 8 tablets

    CERN Document Server

    McFedries, Paul

    2012-01-01

    A visual guide to all the features of the new Windows 8 Tablet This must-have resource features visually rich, step-by-step instructions that show you how to get the most enjoyment from your Windows 8 tablet. Learn about the exciting new Metro UI, optimized specifically for touch devices. The most popular and commonly used apps and functions are covered too, along with the basics of syncing with a network, setting up e-mail, watching videos, listening to music, and common productivity tasks. This book provides all the guidance needed to enjoy all the best the new Windows 8 tablets have to offe

  11. Probabilistic fault localization with sliding windows

    Institute of Scientific and Technical Information of China (English)

    ZHANG Cheng; LIAO JianXin; LI TongHong; ZHU XiaoMin

    2012-01-01

    Fault localization is a central element in network fault management.This paper takes a weighted bipartite graph as a fault propagation model and presents a heuristic fault localization algorithm based on the idea of incremental coverage,which is resilient to inaccurate fault propagation model and the noisy environment.Furthermore,a sliding window mechanism is proposed to tackle the inaccuracy of this algorithm in the presence of improper time windows.As shown in the simulation study,our scheme achieves higher detection rate and lower false positive rate in the noisy environment as well as in the presence of inaccurate windows,than current fault localization algorithms.

  12. Windows PowerShell Quick Reference

    CERN Document Server

    Holmes, Lee

    2006-01-01

    For years, support for scripting and command-line administration on the Windows platform has paled in comparison to the support offered by the Unix platform. Unix administrators enjoyed the immense power and productivity of their command shells, while Windows administrators watched in envy. Windows PowerShell, Microsoft's next-generation command shell and scripting language, changes this landscape completely. This Short Cut contains the essential reference material to help you get your work done-including the scripting language syntax, a regular-expression reference, useful .NET classes, an

  13. Windows 8 & Office 2010 for dummies

    CERN Document Server

    Rathbone, Andy

    2012-01-01

    Two complete e-books covering Windows and Office for one low price! This unique value-priced e-book set brings together two bestselling For Dummies books in a single e-book file. Including a comprehensive table of contents and the full text of each book, complete with cover, this e-book set gives you in-depth information on the leading PC productivity tools: Windows 8 and Office 2010. Best of all, you'll pay less than the cost of each book purchased separately. You'll get the complete text of: Windows 8 For Dummies, which covers The core component

  14. Window Shopping, Granada, 1930s”

    Directory of Open Access Journals (Sweden)

    Mae Claxton

    2010-02-01

    Full Text Available “Window Shopping, Granada, 1930s,” Photographs, p. 16, with the gracious permission of the Eudora Welty FoundationAn African American woman, dressed in her Saturday go-to-town-best, stands outside a store window, chin in hand, contemplating the contents in the window. The image is reflective and thoughtful. What is she thinking? And what lies beyond the frame of this photograph? In Mississippi in the 1930s, could she walk into this store, perhaps try on clothes or hats, and make a purchase? I...

  15. Windows Server 2012 ja Active Directory

    OpenAIRE

    2015-01-01

    Opinnäytetyön aiheena oli tutustua Windows Server 2012–ohjelmiston sisältämiin palveluihin sekä perehtyä tarkemmin Active Directoryn peruskäyttöön. Tavoitteena oli antaa lukijalle ymmärrys Windows Server 2012–ohjelmiston tarjoamista käyttömahdollisuuksista ja Active Directoryn käytöstä. Opinnäytetyön tietoperusta koostui virtuaaliympäristön käytöstä ja erilaisista Windows Server 2012–ohjelman palveluista. Tietoperusta kattoi esimerkiksi seuraavat käsitteet: Virtuaalisointi, Emulointi, Ohj...

  16. Managing customer arrivals with time windows

    DEFF Research Database (Denmark)

    Chen, Gang; Jiang, Liping

    2016-01-01

    Due to increasing container traffic and mega-ships, many seaports face challenges of huge amounts of truck arrivals and congestion problem at terminal gates, which affect port efficiency and generate serious air pollution. To solve this congestion problem, we propose a solution of managing truck...... arrivals with time windows based on the truck-vessel service relationship, specifically trucks delivering containers for the same vessel share one common time window. Time windows can be optimized with different strategies. In this paper, we first propose a framework for installing this solution...

  17. Conceptual design of proton beam window

    Energy Technology Data Exchange (ETDEWEB)

    Teraoku, Takuji; Kaminaga, Masanori; Terada, Atsuhiko; Ishikura, Syuichi; Kinoshita, Hidetaka; Hino, Ryutaro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-03-01

    In a MW-scale neutron scattering facility coupled with a high-intensity proton accelerator, a proton beam window is installed as the boundary between a high vacuum region of the proton beam transport line and a helium environment around the target assembly working as a neutron source. The window is cooled by water so as to remove high volumetric heat generated by the proton beam. A concept of the flat-type proton beam window consisting of two plates of 3 mm thick was proposed, which was found to be feasible under the proton beam power of 5 MW through thermal-hydraulic and structural strength analyses. (authors)

  18. CSS for Windows 8 app development

    CERN Document Server

    Foster, Jeremy

    2013-01-01

    CSS for Windows 8 App Development is your learning guide for CSS - the language of great Windows 8-style apps. Learn the built-in styles that make the built-in controls shine, how to define them, and how to use CSS to give your custom app assets that beautiful Modern UI style. CSS (Cascading Style Sheets) is the clear standard for styling web applications, and with HTML, CSS, and JavaScript now powering apps on Windows 8, it's the clear standard there as well. CSS is a powerful styling and layout language that greatly simplifies the selection of page elements and their visual display, layout,

  19. Optimization of finite difference forward modeling for elastic waves based on optimum combined window functions

    Science.gov (United States)

    Jian, Wang; Xiaohong, Meng; Hong, Liu; Wanqiu, Zheng; Yaning, Liu; Sheng, Gui; Zhiyang, Wang

    2017-03-01

    Full waveform inversion and reverse time migration are active research areas for seismic exploration. Forward modeling in the time domain determines the precision of the results, and numerical solutions of finite difference have been widely adopted as an important mathematical tool for forward modeling. In this article, the optimum combined of window functions was designed based on the finite difference operator using a truncated approximation of the spatial convolution series in pseudo-spectrum space, to normalize the outcomes of existing window functions for different orders. The proposed combined window functions not only inherit the characteristics of the various window functions, to provide better truncation results, but also control the truncation error of the finite difference operator manually and visually by adjusting the combinations and analyzing the characteristics of the main and side lobes of the amplitude response. Error level and elastic forward modeling under the proposed combined system were compared with outcomes from conventional window functions and modified binomial windows. Numerical dispersion is significantly suppressed, which is compared with modified binomial window function finite-difference and conventional finite-difference. Numerical simulation verifies the reliability of the proposed method.

  20. Planning in time - Windows and durations for activities and goals

    Science.gov (United States)

    Vere, S. A.

    1983-01-01

    The present general purpose automated planner/scheduler generates parallel plans aimed at the achievement of goals having imposed time constraints, with both durations and start time windows being specifiable for sets of goal conditions. Deterministic durations of such parallel plan activities as actions, events triggered by circumstances, inferences, and scheduled events entirely outside the actor's control, are explicitly modeled and may be any computable function of the activity variables. The final plan network resembles a PERT chart. Examples are given from the traditional 'blocksworld', and from a realistic 'Spaceworld' in which an autonomous spacecraft photographs objects in deep space and transmits the information to earth.

  1. NOUR. Daylighting and thermal effects of windows in desert houses

    Energy Technology Data Exchange (ETDEWEB)

    Ouahrani, Djamel

    1999-07-01

    constitutes a true improvement of daylighting level rather than a fashion. Especially for new activities such as reading and using modern kitchen equipment, the lighting in traditional houses is not adequate. Only the courtyard receives enough daylight, but it is not uniformly distributed and the activities are therefore located according to their visual demands. The daylighting in modern houses, on the other hand, allows a larger number of activities to take place in different spaces. Most studies on design of passive buildings recommend the location of windows on the south facade because of the ease of passive solar control during summer and optimum solar gain during winter. However, in the urban reality, a house could be oriented to the east, west or north, depending on the constraints of the site. Recommendations for the design of windows with these orientations are scarce. The thermal and daylighting studies indicate that it is possible to have windows to the east or west orientations with still acceptable thermal and daylighting effects as long as they comply with the following recommendations: * For a south orientation, the absolute surfaces and the fenestration should be in the medium to high range, * For an east orientation, the absolute surfaces and the fenestration should be in the medium range, * For an orientation to the west, similar recommendations may be appropriate, albeit with more carefully designed solar shading, since the probability for overheating will be higher, and * For a north orientation, the absolute surfaces and the fenestration should be in the medium to high range. As a device to control eventual glare from opposite walls, solar shading, such as light coloured curtains, are recommended.

  2. Function complex for automated system of coke machinery remote control

    Energy Technology Data Exchange (ETDEWEB)

    Simonov, N.F.; Pankrat' ev, O.N.; Bannikov, L.S.; Slatin, E.I.; Parfenov, G.I.

    1979-05-01

    this paper discusses a functional control system for remote control of coking plants introduced at the KBAiM of the Giprokoks. The control block allows for three modes of operation: fully automatic, by predesignated program according to oven design and technology; semi-automatic, in which individual programs perform automatically, checked and initiated by the operator; and remote, in which the operator controls each operation from the control console. The functions of selecting the location for the coke machinery, signal transmission and control selection have been incorporated as three autonomous but interfacing systems. (In Russian)

  3. Operation Analysis for Electrical Machinery Based on Reluctance Network

    Science.gov (United States)

    Nakamura, Kenji; Ichinokura, Osamu

    In this paper, we describe the basis of a magnetic circuit method and introduce a reluctance network analysis (RNA) proposed by authors. The RNA, which is based on the magnetic circuit method, has some suitable merits for simulating electrical machineries such as a simple analytical model, ease of coupled analysis with electrical circuits, motion, and thermal fields. In addition to these merits, a general-purpose circuit simulator like “SPICE" can be utilized as a solver. We present some applications of the RNA to operation analysis for an orthogonal-core, a switched reluctance motor, and a permanent magnet generator.

  4. Targeting Transcription Elongation Machinery for Breast Cancer Therapy

    Science.gov (United States)

    2017-05-01

    INVESTIGATOR:    Kunxin  Luo CONTRACTING  ORGANIZATION:   University  of  California,  Berkeley REPORT  DATE:  May 2017   TYPE  OF  REPORT:    Annual...NUMBER A ND  ADDRESS(ES) University of California, Berkeley Berkeley, CA 94704 9. SPONSORING  /  MONITORING  AGENCY  NAME(S)  AND  ADDRESS(ES) 10...direct role for the P-TEFb transcription elongation machinery in breast cancer progression. However, in addition to residing in the 7SK snRNP

  5. Government Doc.:Guideline for Chinese Textile Machinery Industry

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Ministry of industry and information Technology(MIIT) has issued an instructive guideline for the development of textile machinery industry in China in an effort to cope with the impact of financial crisis and elaborate on its support for the specific area of interest in promoting this industry in the days to come.This document is taken as an guidebook for textile players to know where this industry will go,and what goals to reach.Whether you are an investor or a competitor,we advise you to study it,to understand it and to take advantage of it.It’s good for all.

  6. Elements of active vibration control for rotating machinery

    Science.gov (United States)

    Ulbrich, Heinz

    1990-01-01

    The success or failure of active vibration control is determined by the availability of suitable actuators, modeling of the entire system including all active elements, positioning of the actuators and sensors, and implementation of problem-adapted control concepts. All of these topics are outlined and their special problems are discussed in detail. Special attention is given to efficient modeling of systems, especially for considering the active elements. Finally, design methods for and the application of active vibration control on rotating machinery are demonstrated by several real applications.

  7. Seismic Location Station for Detection of Unobserved Moving Military Machineries

    OpenAIRE

    Bayramov, Azad; Hashimov, Elshan

    2016-01-01

    The main purpose of this paper is to develop a seismic location station that can detect unobserved, moving military objects, and heavy military machineries behind a forest or a mountain at a distance of 1-2 kilometers from the determined location. Seismic location station includes specific 3D seismic detectors based on the very sensible piezoelectric sensors. The proposed piezoelectric detectors are based on the PVDF+BaTiO3+PZT polymer hybrid composite fabricated based on nano sized BaTiO3 (o...

  8. Effect of machinery wheel load on grass yield

    DEFF Research Database (Denmark)

    Green, Ole; Jørgensen, Rasmus Nyholm; Kristensen, Kristian

    2010-01-01

    Effect of machinery wheel load on grass   Ole Green1, Rasmus N. Jørgensen2, Kristian Kristensen3, René Gislum3, Dionysis Bochtis1, & Claus G. Sørensen1   1University of Aarhus, Dept. of Agricultural Engineering 2University of Southern Denmark, Inst. of Chemical Eng., Biotechnology and Environmental...... 3University of Aarhus, Dept. of Genetics and Biotechnology   Corresponding author: Ole Green Address & e-mail: Research Centre Foulum, Blichers Allé 20, 8830 Tjele. Ole.Green@agrsci.dk     Abstract   Different traffic intensities have been shown to have a negative influence on the yield of grass...

  9. Human Machine Interaction by Simulation of Dynamics of Construction Machinery

    DEFF Research Database (Denmark)

    Langer, Thomas Heegaard

    different kinds of machinery; an articulated backhoe loader and an articulated dump truck. In this work a standardized procedure containing a set of duty cycles for measuring and declaring whole-body vibrations has been proposed for both of these machines. The result of the measuring is important......-body vibration exposure was more than 20 percent and at the same time the fuel consumption was reduced significant. Training of operators is hence beneficial for both employees and employers of the construction industry. The whole-body vibration exposure on operators of dump trucks are dominated by off...

  10. Windows 10其他功能

    Institute of Scientific and Technical Information of China (English)

    王春海

    2015-01-01

    本文介绍Windows10的一些其他功能,这包括新添加的“3DBuilder”、WindowsHello登录界面、Windows To Go功能等。3DBuiIder功能在Windows10中,提供的“3DBuilder”功能,包括了3D模型库,内置了类似Word图案的基本3D图形,包括圆球、圆柱、圆锥、圆环、立方体、火车、飞机等图形(如图1)。

  11. A NOVEL METHOD ON DESIGNING BISPECTRAL WINDOWS

    Institute of Scientific and Technical Information of China (English)

    YaoWenbing; YaoTianren; 等

    2002-01-01

    A novel method on designing bispectral windows is proposed in this letter.Com-pound functions based on a function with binary quadric form,starting from the symmetry characteristic of three-order moments are used as the 2-D window functions.Two approaches on how to find the expressions of the compound functions are discussed in detail.One is to approxi-mate the compound function after being Taylor expanded under the MinimumMean Square Error (MMSE)criteria.Another is to compound the hyperbolic secant function and the binary quadric function directly.According to theoretical analysis,the first type new windows have been proved as slightly better than the conventional ones,the second type new windows are much better than the conventional ones ,and the bispectral estimation mean square error approximates to 0.

  12. Temporal Analysis of Windows MRU Registry Keys

    Science.gov (United States)

    Zhu, Yuandong; Gladyshev, Pavel; James, Joshua

    The Microsoft Windows registry is an important resource in digital forensic investigations. It contains information about operating system configuration, installed software and user activity. Several researchers have focused on the forensic analysis of the Windows registry, but a robust method for associating past events with registry data values extracted from Windows restore points is not yet available. This paper proposes a novel algorithm for analyzing the most recently used (MRU) keys found in consecutive snapshots of the Windows registry. The algorithm compares two snapshots of the same MRU key and identifies data values within the key that have been updated in the period between the two snapshots. User activities associated with the newly updated data values can be assumed to have occurred during the period between the two snapshots.

  13. Holographic window for solar power generation

    Science.gov (United States)

    Kasezawa, Toshihiro; Horimai, Hideyoshi; Tabuchi, Hiroshi; Shimura, Tsutomu

    2016-12-01

    A new photovoltaic generation unit based on the application of holographic technologies called a Holo-Window is proposed in this work. The basic principle and the optical configuration used for the basic experimental unit are described. Suitable fabrication technology for a hologram with the broadband spectrum required to provide the appropriate sunlight capture capability is then discussed. Finally, a laboratory-prototype Holo-Window unit was developed and its performance was evaluated.

  14. 桌面型Windows Server 2008

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Windows Server2008是服务器系统,作为桌面使用没有winxp和win7等用起来得心应手,此文通过对该系统一些配置稍作修改,在不影响其服务器系统的性能情况下打造一款更得心应手的桌面型的windows Server 2008。

  15. Windows in Low Energy Houses. Size Matters

    Energy Technology Data Exchange (ETDEWEB)

    Persson, Mari-Louise

    2004-06-01

    A generally accepted way of building passive houses has been to have small windows facing north and a large glass facade to the south. This is to minimize losses on the north side while gaining as much solar heat as possible on the south. In spring 2001, twenty terraced houses were built outside Goeteborg partly in this way. The indoor temperature is kept at a comfortable level by passive methods, using solar gains and internal gains from household appliances and occupants. Heat losses are very low, since the building envelope is well insulated and since modern coated triple-glazed windows have been installed. The purpose of this work is to investigate how decreasing the window size facing south and increasing the window size facing north in low energy houses will influence the energy consumption and maximum power needed to keep the indoor temperature between 23 and 26 deg C. Different climates and orientations have been investigated and so have the influence of occupancy and window type. A dynamic building simulation tool, DEROB, has been used and the simulations indicate an extremely low energy demand for the houses. The results show that the size of the energy efficient windows does not have a major influence on the heating demand in winter, but is of relevant signification looking at the cooling need in summer. This indicates that instead of the traditional technique of building passive houses it is possible to enlarge the window area facing north and get better lighting conditions. To decrease the energy need for cooling, there is an optimal window size facing south that is smaller than the original size of the investigated buildings.

  16. Holographic window for solar power generation

    Science.gov (United States)

    Kasezawa, Toshihiro; Horimai, Hideyoshi; Tabuchi, Hiroshi; Shimura, Tsutomu

    2016-08-01

    A new photovoltaic generation unit based on the application of holographic technologies called a Holo-Window is proposed in this work. The basic principle and the optical configuration used for the basic experimental unit are described. Suitable fabrication technology for a hologram with the broadband spectrum required to provide the appropriate sunlight capture capability is then discussed. Finally, a laboratory-prototype Holo-Window unit was developed and its performance was evaluated.

  17. The discount window : time for reform?

    OpenAIRE

    Craig S. Hakkio; Gordon H. Sellon

    2000-01-01

    For many years, the Federal Reserve's discount window has played an important role in monetary policy. Discount window borrowing helps individual depository institutions manage their reserve accounts in the presence of unexpected deposit and payments flows. Improved reserve management, in turn, helps stabilize the overnight federal funds market by reducing the volatility of short-term interest rates. Moreover, announced changes in the Federal Reserve's discount rate have often signaled import...

  18. Window Size Impact in Human Activity Recognition

    Directory of Open Access Journals (Sweden)

    Oresti Banos

    2014-04-01

    Full Text Available Signal segmentation is a crucial stage in the activity recognition process; however, this has been rarely and vaguely characterized so far. Windowing approaches are normally used for segmentation, but no clear consensus exists on which window size should be preferably employed. In fact, most designs normally rely on figures used in previous works, but with no strict studies that support them. Intuitively, decreasing the window size allows for a faster activity detection, as well as reduced resources and energy needs. On the contrary, large data windows are normally considered for the recognition of complex activities. In this work, we present an extensive study to fairly characterize the windowing procedure, to determine its impact within the activity recognition process and to help clarify some of the habitual assumptions made during the recognition system design. To that end, some of the most widely used activity recognition procedures are evaluated for a wide range of window sizes and activities. From the evaluation, the interval 1–2 s proves to provide the best trade-off between recognition speed and accuracy. The study, specifically intended for on-body activity recognition systems, further provides designers with a set of guidelines devised to facilitate the system definition and configuration according to the particular application requirements and target activities.

  19. AN INTRODUCTION TO WINDOWS 2000 AT CERN

    CERN Multimedia

    2001-01-01

    A demonstration of the new supported Windows environment for all the CERN personal computers (PC) will be given which is based on Windows 2000. This presentation will assume little or no familiarity with the PC, or NICE, and will concentrate on the services being offered to the users of PCs at CERN. How NICE 2000 can facilitate the work of all users, eventually becoming the key access point to all activities in the laboratory will be demonstrated. Information: http://winservices.web.cern.ch/winservices/Seminars/Tutorials/ Date Title Language Location Speaker Fri 1/6 10:00 Une introduction à Windows 2000 au CERN F IT Auditorium (31/3-004) Alberto Pace Tue 5/6 10:00 Une introduction à Windows 2000 au CERN F LHC Auditorium (30/7th floor) Frederic Hemmer Tue 5/6 14:00 Une introduction à Windows 2000 au CERN F SL Auditorium (864/1s floor) Michel Bornand Tue 5/6 14:00 An introduction to Windows 2000 at CERN E IT Auditorium (31/3-004) Andreas Wagner ...

  20. Holography: childrens' window to relativity

    Science.gov (United States)

    MacShane, James E.

    1995-02-01

    This paper is concerned with the development of the concept of natural education. Psychology has discovered that all humans learn intuitively the cultural concepts of time from birth to eight and one-half to ten years of age. Einstein showed us that this must also be the natural time for the development of spatial concepts. The importance of this has been dramatized for me in the past eight years that I have been developing the Laser Arts and Holography Programs and Workshops. I have worked with over 100,000 students kindergarten through eighth grade. I have worked with 175 students age 8 to 10 in three hour and one half workshops specifically on the development of time and space concepts. The concepts developed are based upon the vast amount of psychological evidence related to the natural development of time and space understandings, Dr. Nils Abramson's 'Light in Flight' and subsequent work on the clarification of relativity through holography, and Maria Montessori's method of Scientific Education. The paper also demonstrates the natural method of teaching science to younger students is to teach scientifically. All of the research which has been done in the past 100 years has been used by the educational institutions to try to improve the system. What has not been done is changing the system to how humans learn. Because of the perceived hi-tech nature of the program I am able to dramatize the potential. An outline for a holography curriculum kindergarten through eighth grade is included.