WorldWideScience

Sample records for mach number regime

  1. Anomalous flow deflection at planetary bow shocks in the low Alfven Mach number regime

    Science.gov (United States)

    Nishino, Masaki N.; Fujimoto, Masaki; Tai, Phan-Duc; Mukai, Toshifumi; Saito, Yoshifumi; Kuznetsova, Masha M.; Rastaetter, Lutz

    A planetary magnetosphere is an obstacle to the super-sonic solar wind and the bow shock is formed in the front-side of it. In ordinary hydro-dynamics, the flow decelerated at the shock is diverted around the obstacle symmetrically about the planet-Sun line, which is indeed observed in the magnetosheath most of the time. Here we show a case under a very low density solar wind in which duskward flow was observed in the dawnside magnetosheath of the Earth's magnetosphere. A Rankine-Hugoniot test across the bow shock shows that the magnetic effect is crucial for this "wrong flow" to appear. A full three-dimensional Magneto- Hydro-Dynamics (MHD) simulation of the situation in this previously unexplored parameter regime is also performed. It is illustrated that in addition to the "wrong flow" feature, various peculiar characteristics appear in the global picture of the MHD flow interaction with the obstacle. The magnetic effect at the bow shock should become more conspicuously around the Mercury's magnetosphere, because stronger interplanetary magnetic field and slower solar wind around the Mercury let the Alfven Mach number low. Resultant strong deformation of the magnetosphere induced by the "wrong flow" will cause more complex interaction between the solar wind and the Mercury.

  2. CONDUCTION IN LOW MACH NUMBER FLOWS. I. LINEAR AND WEAKLY NONLINEAR REGIMES

    Energy Technology Data Exchange (ETDEWEB)

    Lecoanet, Daniel [Department of Astronomy and Theoretical Astrophysics Center, University of California, Berkeley, CA 94720 (United States); Brown, Benjamin P.; Zweibel, Ellen G.; Burns, Keaton J.; Oishi, Jeffrey S. [Kavli Institute for Theoretical Physics, University of California, Santa Barbara, CA 93106 (United States); Vasil, Geoffrey M., E-mail: dlecoanet@berkeley.edu [School of Mathematics and Statistics, University of Sydney, NSW 2006 (Australia)

    2014-12-20

    Thermal conduction is an important energy transfer and damping mechanism in astrophysical flows. Fourier's law, in which the heat flux is proportional to the negative temperature gradient, leading to temperature diffusion, is a well-known empirical model of thermal conduction. However, entropy diffusion has emerged as an alternative thermal conduction model, despite not ensuring the monotonicity of entropy. This paper investigates the differences between temperature and entropy diffusion for both linear internal gravity waves and weakly nonlinear convection. In addition to simulating the two thermal conduction models with the fully compressible Navier-Stokes equations, we also study their effects in the reduced ''soundproof'' anelastic and pseudoincompressible (PI) equations. We find that in the linear and weakly nonlinear regime, temperature and entropy diffusion give quantitatively similar results, although there are some larger errors in the PI equations with temperature diffusion due to inaccuracies in the equation of state. Extrapolating our weakly nonlinear results, we speculate that differences between temperature and entropy diffusion might become more important for strongly turbulent convection.

  3. Quasiperpendicular high Mach number Shocks

    CERN Document Server

    Sulaiman, A H; Dougherty, M K; Burgess, D; Fujimoto, M; Hospodarsky, G B

    2015-01-01

    Shock waves exist throughout the universe and are fundamental to understanding the nature of collisionless plasmas. Reformation is a process, driven by microphysics, which typically occurs at high Mach number supercritical shocks. While ongoing studies have investigated this process extensively both theoretically and via simulations, their observations remain few and far between. In this letter we present a study of very high Mach number shocks in a parameter space that has been poorly explored and we identify reformation using in situ magnetic field observations from the Cassini spacecraft at 10 AU. This has given us an insight into quasi-perpendicular shocks across two orders of magnitude in Alfven Mach number (MA) which could potentially bridge the gap between modest terrestrial shocks and more exotic astrophysical shocks. For the first time, we show evidence for cyclic reformation controlled by specular ion reflection occurring at the predicted timescale of ~0.3 {\\tau}c, where {\\tau}c is the ion gyroperio...

  4. Linearized Euler Equations for the Determination of Scattering Matrices for Orifice and Perforated Plate Configurations in the High Mach Number Regime

    Directory of Open Access Journals (Sweden)

    Moritz Schulze

    2016-10-01

    Full Text Available The interaction of a plane acoustic wave and a sheared flow is numerically investigated for simple orifice and perforated plate configurations in an isolated, non-resonant environment for Mach numbers up to choked conditions in the holes. Analytical derivations found in the literature are not valid in this regime due to restrictions to low Mach numbers and incompressible conditions. To allow for a systematic and detailed parameter study, a low-cost hybrid Computational Fluid Dynamic/Computational Aeroacoustic (CFD/CAA methodology is used. For the CFD simulations, a standard k–ϵ Reynolds-Averaged Navier–Stokes (RANS model is employed, while the CAA simulations are based on frequency space transformed linearized Euler equations (LEE, which are discretized in a stabilized Finite Element method. Simulation times in the order of seconds per frequency allow for a detailed parameter study. From the application of the Multi Microphone Method together with the two-source location procedure, acoustic scattering matrices are calculated and compared to experimental findings showing very good agreement. The scattering properties are presented in the form of scattering matrices for a frequency range of 500–1500 Hz.

  5. Quasiperpendicular High Mach Number Shocks

    Science.gov (United States)

    Sulaiman, A. H.; Masters, A.; Dougherty, M. K.; Burgess, D.; Fujimoto, M.; Hospodarsky, G. B.

    2015-09-01

    Shock waves exist throughout the Universe and are fundamental to understanding the nature of collisionless plasmas. Reformation is a process, driven by microphysics, which typically occurs at high Mach number supercritical shocks. While ongoing studies have investigated this process extensively both theoretically and via simulations, their observations remain few and far between. In this Letter we present a study of very high Mach number shocks in a parameter space that has been poorly explored and we identify reformation using in situ magnetic field observations from the Cassini spacecraft at 10 AU. This has given us an insight into quasiperpendicular shocks across 2 orders of magnitude in Alfvén Mach number (MA ) which could potentially bridge the gap between modest terrestrial shocks and more exotic astrophysical shocks. For the first time, we show evidence for cyclic reformation controlled by specular ion reflection occurring at the predicted time scale of ˜0.3 τc , where τc is the ion gyroperiod. In addition, we experimentally reveal the relationship between reformation and MA and focus on the magnetic structure of such shocks to further show that for the same MA , a reforming shock exhibits stronger magnetic field amplification than a shock that is not reforming.

  6. A new numerical solver for flows at various Mach numbers

    CERN Document Server

    Miczek, F; Edelmann, P V F

    2014-01-01

    Many problems in stellar astrophysics feature low Mach number flows. However, conventional compressible hydrodynamics schemes frequently used in the field have been developed for the transonic regime and exhibit excessive numerical dissipation for these flows. While schemes were proposed that solve hydrodynamics strictly in the low Mach regime and thus restrict their applicability, we aim at developing a scheme that correctly operates in a wide range of Mach numbers. Based on an analysis of the asymptotic behavior of the Euler equations in the low Mach limit we propose a novel scheme that is able to maintain a low Mach number flow setup while retaining all effects of compressibility. This is achieved by a suitable modification of the well-known Roe solver. Numerical tests demonstrate the capability of this new scheme to reproduce slow flow structures even in moderate numerical resolution. Our scheme provides a promising approach to a consistent multidimensional hydrodynamical treatment of astrophysical low Ma...

  7. Chaotic behaviour of high Mach number flows

    Science.gov (United States)

    Varvoglis, H.; Ghosh, S.

    1985-01-01

    The stability of the super-Alfvenic flow of a two-fluid plasma model with respect to the Mach number and the angle between the flow direction and the magnetic field is investigated. It is found that, in general, a large scale chaotic region develops around the initial equilibrium of the laminar flow when the Mach number exceeds a certain threshold value. After reaching a maximum the size of this region begins shrinking and goes to zero as the Mach number tends to infinity. As a result high Mach number flows in time independent astrophysical plasmas may lead to the formation of 'quasi-shocks' in the presence of little or no dissipation.

  8. National transonic facility Mach number system

    Science.gov (United States)

    Kern, F. A.; Knight, C. W.; Zasimowich, R. F.

    1985-01-01

    The Mach number system for the Langley Research Center's National Transonic Facility was designed to measure pressures to determine Mach number to within + or - 0.002. Nine calibration laboratory type fused quartz gages, four different range gages for the total pressure measurement, and five different range gages for the static pressure measurement were used to satisfy the accuracy requirement over the 103,000-890,000 Pa total pressure range of the tunnel. The system which has been in operation for over 1 year is controlled by a programmable data process controller to select, through the operation of solenoid valves, the proper range fused quartz gage to maximize the measurement accuracy. The pressure gage's analog outputs are digitized by the process controller and transmitted to the main computer for Mach number computation. An automatic two-point on-line calibration of the nine quartz gages is provided using a high accuracy mercury manometer.

  9. Low Mach Number Fluctuating Hydrodynamics for Electrolytes

    CERN Document Server

    Péraud, Jean-Philippe; Chaudhri, Anuj; Bell, John B; Donev, Aleksandar; Garcia, Alejandro L

    2016-01-01

    We formulate and study computationally the low Mach number fluctuating hydrodynamic equations for electrolyte solutions. We are interested in studying transport in mixtures of charged species at the mesoscale, down to scales below the Debye length, where thermal fluctuations have a significant impact on the dynamics. Continuing our previous work on fluctuating hydrodynamics of multicomponent mixtures of incompressible isothermal miscible liquids (A. Donev, et al., Physics of Fluids, 27, 3, 2015), we now include the effect of charged species using a quasielectrostatic approximation. Localized charges create an electric field, which in turn provides additional forcing in the mass and momentum equations. Our low Mach number formulation eliminates sound waves from the fully compressible formulation and leads to a more computationally efficient quasi-incompressible formulation. We demonstrate our ability to model saltwater (NaCl) solutions in both equilibrium and nonequilibrium settings. We show that our algorithm...

  10. Low Mach number fluctuating hydrodynamics for electrolytes

    Science.gov (United States)

    Péraud, Jean-Philippe; Nonaka, Andy; Chaudhri, Anuj; Bell, John B.; Donev, Aleksandar; Garcia, Alejandro L.

    2016-11-01

    We formulate and study computationally the low Mach number fluctuating hydrodynamic equations for electrolyte solutions. We are interested in studying transport in mixtures of charged species at the mesoscale, down to scales below the Debye length, where thermal fluctuations have a significant impact on the dynamics. Continuing our previous work on fluctuating hydrodynamics of multicomponent mixtures of incompressible isothermal miscible liquids [A. Donev et al., Phys. Fluids 27, 037103 (2015), 10.1063/1.4913571], we now include the effect of charged species using a quasielectrostatic approximation. Localized charges create an electric field, which in turn provides additional forcing in the mass and momentum equations. Our low Mach number formulation eliminates sound waves from the fully compressible formulation and leads to a more computationally efficient quasi-incompressible formulation. We demonstrate our ability to model saltwater (NaCl) solutions in both equilibrium and nonequilibrium settings. We show that our algorithm is second order in the deterministic setting and for length scales much greater than the Debye length gives results consistent with an electroneutral approximation. In the stochastic setting, our model captures the predicted dynamics of equilibrium and nonequilibrium fluctuations. We also identify and model an instability that appears when diffusive mixing occurs in the presence of an applied electric field.

  11. Design of a continuously variable Mach-number nozzle

    Institute of Scientific and Technical Information of China (English)

    郭善广; 王振国; 赵玉新

    2015-01-01

    A design method was developed to specify the profile of the continuously variable Mach-number nozzle for the supersonic wind tunnel. The controllable contour design technique was applied to obtaining the original nozzle profile, while other Mach- numbers were derived from the transformation of the original profile. A design scheme, covering a Mach-number range of 3.0Mach-number deviation at the nozzle exit. The present design method achieves the continuously variable Mach-number flow during a wind tunnel running.

  12. Low Mach number theory of freely cooling granular gases

    CERN Document Server

    Meerson, Baruch; Vilenkin, Arkady

    2007-01-01

    We use hydrodynamic equations to investigate the dynamics of a freely cooling dilute granular gas with nearly elastic particle collisions. We assume a narrow channel geometry and focus on the regime where the sound travel time through the system is much shorter than the typical cooling time of the gas. As a result, the pressure rapidly becomes almost homogeneous, while the Mach number is small. Eliminating the sound waves and employing Lagrangian coordinates, we reduce the full hydrodynamics to a single nonlinear/nonlocal equation of a reaction-diffusion type. This equation describes a broad class of flows and, in particular, can follow the development of strongly nonlinear states during clustering instability. Without heat diffusion, the reduced equation is exactly soluble and develops a finite-time density blowup with the same local features as those exhibited by the recently found family of exact solutions of the full set of ideal hydrodynamic equations (Fouxon et al. 2007). The heat diffusion, however, ar...

  13. Turbulent mixing of a slightly supercritical Van der Waals fluid at Low-Mach number

    CERN Document Server

    Battista, Francesco; Casciola, Carlo Massimo

    2014-01-01

    Supercritical fluids near the critical point are characterized by liquid-like densities and gas-like transport properties. These features are purposely exploited in different contexts ranging from natural products extraction/fractionation to aerospace propulsion. Large part of studies concerns this last context, focusing on the dynamics of supercritical fluids at high Mach number where compressibility and thermodynamics strictly interact. Despite the widespread use also at low Mach number, the turbulent mixing properties of slightly supercritical fluids have still not investigated in detail in this regime. This topic is addressed here by dealing with Direct Numerical Simulations (DNS) of a coaxial jet of a slightly supercritical Van der Waals fluid. Since acoustic effects are irrelevant in the Low Mach number conditions found in many industrial applications, the numerical model is based on a suitable low-Mach number expansion of the governing equation. According to experimental observations, the weakly superc...

  14. The small-scale dynamo: Breaking universality at high Mach numbers

    CERN Document Server

    Schleicher, Dominik R G; Federrath, Christoph; Bovino, Stefano; Schmidt, Wolfram

    2013-01-01

    (Abridged) The small-scale dynamo may play a substantial role in magnetizing the Universe under a large range of conditions, including subsonic turbulence at low Mach numbers, highly supersonic turbulence at high Mach numbers and a large range of magnetic Prandtl numbers Pm, i.e. the ratio of kinetic viscosity to magnetic resistivity. Low Mach numbers may in particular lead to the well-known, incompressible Kolmogorov turbulence, while for high Mach numbers, we are in the highly compressible regime, thus close to Burgers turbulence. In this study, we explore whether in this large range of conditions, a universal behavior can be expected. Our starting point are previous investigations in the kinematic regime. Here, analytic studies based on the Kazantsev model have shown that the behavior of the dynamo depends significantly on Pm and the type of turbulence, and numerical simulations indicate a strong dependence of the growth rate on the Mach number of the flow. Once the magnetic field saturates on the current ...

  15. Low Mach Number Fluctuating Hydrodynamics of Diffusively Mixing Fluids

    CERN Document Server

    Donev, A; Sun, Y; Fai, T; Garcia, A L; Bell, J B

    2012-01-01

    We formulate low Mach number fluctuating hydrodynamic equations appropriate for modeling diffusive mixing in isothermal mixtures of fluids with different density and transport coefficients. These equations eliminate the fast isentropic fluctuations in pressure associated with the propagation of sound waves by replacing the equation of state with a local thermodynamic constraint. We demonstrate that the low Mach number model preserves the spatio-temporal spectrum of the slower diffusive fluctuations. We develop a strictly conservative finite-volume spatial discretization of the low Mach number fluctuating equations in both two and three dimensions. We construct several explicit Runge-Kutta temporal integrators that strictly maintain the equation of state constraint. The resulting spatio-temporal discretization is second-order accurate deterministically and maintains fluctuation-dissipation balance in the linearized stochastic equations. We apply our algorithms to model the development of giant concentration fl...

  16. Mathematical and numerical aspects of low mach number flows

    Energy Technology Data Exchange (ETDEWEB)

    Schochet, St.; Bresch, D.; Grenier, E.; Alazard, T.; Gordner, A.; Sankaran, V.; Massot, M.; Sery, R.; Pebay, P.; Lunch, O.; Mazhorova, O.; Turkel, O.E.; Faille, I.; Danchin, R.; Allain, O.; Birken, P.; Lafitte, O.; Kloczko, T.; Frick, W.; Bui, T.; Dellacherie, S.; Klein, R.; Roe, Ph.; Accary, G.; Braack, M.; Picano, F.; Cadiou, A.; Dinescu, C.; Lesage, A.C.; Wesseling, P.; Heuveline, V.; Jobelin, M.; Weisman, C.; Merkle, C.

    2004-07-01

    Low Mach number flows represent a significant part of the various flows encountered in geophysics, industry or every day life. Paradoxically, the mathematical analysis of the equations governing these flows is difficult and on the practical side, the research of numerical algorithms valid for all flow speeds is continuing to be a challenge. However, in the last decade, both from the theoretical and the numerical sides, significant progresses were made in the understanding and analysis of the equations governing these flows. This conference intends to provide an up-to-date inventory of recent mathematical and numerical results in the analysis of these flows by bringing together both mathematicians and numericists active in this area. In the framework of the conference, a numerical workshop is organized which proposes to compute several challenging low Mach number flows: liquid flow around non-cavitating and cavitating NACA0015 hydrofoil, natural convection with large temperature differences, free convection, free surface flow, vessel pressurization. This document brings together the descriptions of the test cases of the numerical workshop and the abstracts of the conference papers: A 3D high order finite volume method for the prediction of near-critical fluid flows (G. ACCARY, I. RASPO, P. BONTOUX, B. ZAPPOLI); low Mach number limit of the non-isentropic Navier-Stokes equations (T. ALAZARD); simulation of cavitation rolls past a forward step with a bubble model (O. ALLAIN, N. BLASKA, C. LECA); flux preconditioning methods and fire events (P. BIRKEN, A. MEISTER); an adaptive finite element solver for compressible flows: application to heat-driven cavity benchmarks in 2D and 3D (M. BRAACK); comparison of various implicit, explicit, centered and upwind schemes for the simulation of compressed flows on moving mesh (A. CADIOU, M. BUFFAT, L. Le PENVEN, C. Le RIBAULT); low Mach number limit for viscous compressible flows (R. DANCHIN); some Properties of the low Mach number

  17. Mathematical and numerical aspects of low mach number flows

    Energy Technology Data Exchange (ETDEWEB)

    Schochet, St.; Bresch, D.; Grenier, E.; Alazard, T.; Gordner, A.; Sankaran, V.; Massot, M.; Sery, R.; Pebay, P.; Lunch, O.; Mazhorova, O.; Turkel, O.E.; Faille, I.; Danchin, R.; Allain, O.; Birken, P.; Lafitte, O.; Kloczko, T.; Frick, W.; Bui, T.; Dellacherie, S.; Klein, R.; Roe, Ph.; Accary, G.; Braack, M.; Picano, F.; Cadiou, A.; Dinescu, C.; Lesage, A.C.; Wesseling, P.; Heuveline, V.; Jobelin, M.; Weisman, C.; Merkle, C.

    2004-07-01

    Low Mach number flows represent a significant part of the various flows encountered in geophysics, industry or every day life. Paradoxically, the mathematical analysis of the equations governing these flows is difficult and on the practical side, the research of numerical algorithms valid for all flow speeds is continuing to be a challenge. However, in the last decade, both from the theoretical and the numerical sides, significant progresses were made in the understanding and analysis of the equations governing these flows. This conference intends to provide an up-to-date inventory of recent mathematical and numerical results in the analysis of these flows by bringing together both mathematicians and numericists active in this area. In the framework of the conference, a numerical workshop is organized which proposes to compute several challenging low Mach number flows: liquid flow around non-cavitating and cavitating NACA0015 hydrofoil, natural convection with large temperature differences, free convection, free surface flow, vessel pressurization. This document brings together the descriptions of the test cases of the numerical workshop and the abstracts of the conference papers: A 3D high order finite volume method for the prediction of near-critical fluid flows (G. ACCARY, I. RASPO, P. BONTOUX, B. ZAPPOLI); low Mach number limit of the non-isentropic Navier-Stokes equations (T. ALAZARD); simulation of cavitation rolls past a forward step with a bubble model (O. ALLAIN, N. BLASKA, C. LECA); flux preconditioning methods and fire events (P. BIRKEN, A. MEISTER); an adaptive finite element solver for compressible flows: application to heat-driven cavity benchmarks in 2D and 3D (M. BRAACK); comparison of various implicit, explicit, centered and upwind schemes for the simulation of compressed flows on moving mesh (A. CADIOU, M. BUFFAT, L. Le PENVEN, C. Le RIBAULT); low Mach number limit for viscous compressible flows (R. DANCHIN); some Properties of the low Mach number

  18. Low Mach Number Fluctuating Hydrodynamics of Multispecies Liquid Mixtures

    CERN Document Server

    Donev, A; Bhattacharjee, A K; Garcia, A L; Bell, J B

    2014-01-01

    We develop a low Mach number formulation of the hydrodynamic equations describing transport of mass and momentum in a multispecies mixture of incompressible miscible liquids at specified temperature and pressure that generalizes our prior work on ideal mixtures of ideal gases and binary liquid mixtures. In this formulation we combine and extend a number of existing descriptions of multispecies transport available in the literature. The formulation applies to non-ideal mixtures of arbitrary number of species, without the need to single out a 'solvent' species, and includes contributions to the diffusive mass flux due to gradients of composition, temperature and pressure. Momentum transport and advective mass transport are handled using a low Mach number approach that eliminates fast sound waves (pressure fluctuations) from the full compressible system of equations and leads to a quasi-incompressible formulation. Thermal fluctuations are included in our fluctuating hydrodynamics description following the princi...

  19. Statistical error in particle simulations of low mach number flows

    Energy Technology Data Exchange (ETDEWEB)

    Hadjiconstantinou, N G; Garcia, A L

    2000-11-13

    We present predictions for the statistical error due to finite sampling in the presence of thermal fluctuations in molecular simulation algorithms. The expressions are derived using equilibrium statistical mechanics. The results show that the number of samples needed to adequately resolve the flowfield scales as the inverse square of the Mach number. Agreement of the theory with direct Monte Carlo simulations shows that the use of equilibrium theory is justified.

  20. Low Mach Number Fluctuating Hydrodynamics of Binary Liquid Mixtures

    CERN Document Server

    Nonaka, A J; Bell, J B; Donev, A

    2014-01-01

    Continuing on our previous work [ArXiv:1212.2644], we develop semi-implicit numerical methods for solving low Mach number fluctuating hydrodynamic equations appropriate for modeling diffusive mixing in isothermal mixtures of fluids with different densities and transport coefficients. We treat viscous dissipation implicitly using a recently-developed variable-coefficient Stokes solver [ArXiv:1308.4605]. This allows us to increase the time step size significantly compared to the earlier explicit temporal integrator. For viscous-dominated flows, such as flows at small scales, we develop a scheme for integrating the overdamped limit of the low Mach equations, in which inertia vanishes and the fluid motion can be described by a steady Stokes equation. We also describe how to incorporate advanced higher-order Godunov advection schemes in the numerical method, allowing for the treatment of fluids with high Schmidt number including the vanishing mass diffusion coefficient limit. We incorporate thermal fluctuations in...

  1. Mach number study of supersonic turbulence: The properties of the density field

    CERN Document Server

    Konstandin, Lukas; Girichidis, Philipp; Peters, Thomas; Shetty, Rahul; Klessen, Ralf S

    2015-01-01

    We model driven, compressible, isothermal, turbulence with Mach numbers ranging from the subsonic ($\\mathcal{M} \\approx 0.65$) to the highly supersonic regime ($\\mathcal{M}\\approx 16 $). The forcing scheme consists both solenoidal (transverse) and compressive (longitudinal) modes in equal parts. We find a relation $\\sigma_{s}^2 = \\mathrm{b}\\log{(1+\\mathrm{b}^2\\mathcal{M}^2)}$ between the Mach number and the standard deviation of the logarithmic density with $\\mathrm{b} = 0.457 \\pm 0.007$. The density spectra follow $\\mathcal{D}(k,\\,\\mathcal{M}) \\propto k^{\\zeta(\\mathcal{M})}$ with scaling exponents depending on the Mach number. We find $\\zeta(\\mathcal{M}) = \\alpha \\mathcal{M}^{\\beta}$ with a coefficient $\\alpha$ that varies slightly with resolution, whereas $\\beta$ changes systematically. We extrapolate to the limit of infinite resolution and find $\\alpha = -1.91 \\pm 0.01,\\, \\beta =-0.30\\pm 0.03$. The dependence of the scaling exponent on the Mach number implies a fractal dimension $D=2+0.96 \\mathcal{M}^{-0.3...

  2. Courant Number and Mach Number Insensitive CE/SE Euler Solvers

    Science.gov (United States)

    Chang, Sin-Chung

    2005-01-01

    It has been known that the space-time CE/SE method can be used to obtain ID, 2D, and 3D steady and unsteady flow solutions with Mach numbers ranging from 0.0028 to 10. However, it is also known that a CE/SE solution may become overly dissipative when the Mach number is very small. As an initial attempt to remedy this weakness, new 1D Courant number and Mach number insensitive CE/SE Euler solvers are developed using several key concepts underlying the recent successful development of Courant number insensitive CE/SE schemes. Numerical results indicate that the new solvers are capable of resolving crisply a contact discontinuity embedded in a flow with the maximum Mach number = 0.01.

  3. Hysteresis phenomenon of hypersonic inlet at high Mach number

    Science.gov (United States)

    Jiao, Xiaoliang; Chang, Juntao; Wang, Zhongqi; Yu, Daren

    2016-11-01

    When the hypersonic inlet works at a Mach number higher than the design value, the hypersonic inlet is started with a regular reflection of the external compression shock at the cowl, whereas a Mach reflection will result in the shock propagating forwards to cause a shock detachment at the cowl lip, which is called "local unstart of inlet". As there are two operation modes of hypersonic inlet at high Mach number, the mode transition may occur with the operation condition of hypersonic inlet changing. A cowl-angle-variation-induced hysteresis and a downstream-pressure-variation-induced hysteresis in the hypersonic inlet start↔local unstart transition are obtained by viscous numerical simulations in this paper. The interaction of the external compression shock and boundary layer on the cowl plays a key role in the hysteresis phenomenon. Affected by the transition of external compression shock reflection at the cowl and the transition between separated and attached flow on the cowl, a hysteresis exists in the hypersonic inlet start↔local unstart transition. The hysteresis makes the operation of a hypersonic inlet very difficult to control. In order to avoid hysteresis phenomenon and keep the hypersonic inlet operating in a started mode, the control route should never pass through the local unstarted boundary.

  4. The Dynamics of Very High Alfvén Mach Number Shocks in Space Plasmas

    Science.gov (United States)

    Sundberg, Torbjörn; Burgess, David; Scholer, Manfred; Masters, Adam; Sulaiman, Ali H.

    2017-02-01

    Astrophysical shocks, such as planetary bow shocks or supernova remnant shocks, are often in the high or very-high Mach number regime, and the structure of such shocks is crucial for understanding particle acceleration and plasma heating, as well inherently interesting. Recent magnetic field observations at Saturn’s bow shock, for Alfvén Mach numbers greater than about 25, have provided evidence for periodic non-stationarity, although the details of the ion- and electron-scale processes remain unclear due to limited plasma data. High-resolution, multi-spacecraft data are available for the terrestrial bow shock, but here the very high Mach number regime is only attained on extremely rare occasions. Here we present magnetic field and particle data from three such quasi-perpendicular shock crossings observed by the four-spacecraft Cluster mission. Although both ion reflection and the shock profile are modulated at the upstream ion gyroperiod timescale, the dominant wave growth in the foot takes place at sub-proton length scales and is consistent with being driven by the ion Weibel instability. The observed large-scale behavior depends strongly on cross-scale coupling between ion and electron processes, with ion reflection never fully suppressed, and this suggests a model of the shock dynamics that is in conflict with previous models of non-stationarity. Thus, the observations offer insight into the conditions prevalent in many inaccessible astrophysical environments, and provide important constraints for acceleration processes at such shocks.

  5. Extension of the pressure correction method to zero-Mach number compressible flows

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    In the present paper,the classical pressure correction method was extended into low Mach number compressible flow regime by integrating equation of state into SIMPLE algorithm.The self-developed code based on this algorithm was applied to predicting the lid-driven cavity flow and shock tube prob-lems,and the results showed good agreement with benchmark solutions and the Mach number can reach the magnitude of as low as 10-5.The attenuation of sound waves in viscous medium was then simulated.The results agree well with the analytical solutions given by theoretical acoustics.This demonstrated that the present method could also be implemented in acoustics field simulation,which is crucial for thermoacoustic simulation.

  6. Extension of the pressure correction method to zero-Mach number compressible flows

    Institute of Scientific and Technical Information of China (English)

    HE YaLing; HUANG Jing; TAO YuBing; TAO WenQuan

    2009-01-01

    In the present paper, the classical pressure correction method was extended into low Mach number compressible flow regime by integrating equation of state into SIMPLE algorithm. The self-developed code based on this algorithm was applied to predicting the lid-driven cavity flow and shock tube prob-lems, and the results showed good agreement with benchmark solutions and the Mach number can reach the magnitude of as low as 10-5. The attenuation of sound waves in viscous medium was then simulated. The results agree well with the analytical solutions given by theoretical acoustics. This demonstrated that the present method could also be implemented in acoustics field simulation, which is crucial for thermoacoustic simulation.

  7. Low Mach number fluctuating hydrodynamics of multispecies liquid mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Donev, Aleksandar, E-mail: donev@courant.nyu.edu; Bhattacharjee, Amit Kumar [Courant Institute of Mathematical Sciences, New York University, New York, New York 10012 (United States); Nonaka, Andy; Bell, John B. [Center for Computational Science and Engineering, Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States); Garcia, Alejandro L. [Department of Physics and Astronomy, San Jose State University, San Jose, California 95192 (United States)

    2015-03-15

    We develop a low Mach number formulation of the hydrodynamic equations describing transport of mass and momentum in a multispecies mixture of incompressible miscible liquids at specified temperature and pressure, which generalizes our prior work on ideal mixtures of ideal gases [Balakrishnan et al., “Fluctuating hydrodynamics of multispecies nonreactive mixtures,” Phys. Rev. E 89 013017 (2014)] and binary liquid mixtures [Donev et al., “Low mach number fluctuating hydrodynamics of diffusively mixing fluids,” Commun. Appl. Math. Comput. Sci. 9(1), 47-105 (2014)]. In this formulation, we combine and extend a number of existing descriptions of multispecies transport available in the literature. The formulation applies to non-ideal mixtures of arbitrary number of species, without the need to single out a “solvent” species, and includes contributions to the diffusive mass flux due to gradients of composition, temperature, and pressure. Momentum transport and advective mass transport are handled using a low Mach number approach that eliminates fast sound waves (pressure fluctuations) from the full compressible system of equations and leads to a quasi-incompressible formulation. Thermal fluctuations are included in our fluctuating hydrodynamics description following the principles of nonequilibrium thermodynamics. We extend the semi-implicit staggered-grid finite-volume numerical method developed in our prior work on binary liquid mixtures [Nonaka et al., “Low mach number fluctuating hydrodynamics of binary liquid mixtures,” http://arxiv.org/abs/1410.2300 (2015)] and use it to study the development of giant nonequilibrium concentration fluctuations in a ternary mixture subjected to a steady concentration gradient. We also numerically study the development of diffusion-driven gravitational instabilities in a ternary mixture and compare our numerical results to recent experimental measurements [Carballido-Landeira et al., “Mixed-mode instability of a

  8. Convective heat transport in stratified atmospheres at low and high Mach number

    CERN Document Server

    Anders, Evan H

    2016-01-01

    Convection in astrophysical systems is stratified and often occurs at high Rayleigh number (Ra) and low Mach number (Ma). Here we study stratified convection in the context of plane-parallel, polytropically stratified atmospheres. We hold the density stratification ($n_{\\rho}$) and Prandtl number (Pr) constant while varying Ma and Ra to determine the behavior of the Nusselt number (Nu), which quantifies the efficiency of convective heat transport. As Ra increases and $\\text{Ma} \\rightarrow 1$, a scaling of Nu $\\propto$ Ra$^{0.45}$ is observed. As Ra increases to a regime where Ma $\\geq 1$, this scaling gives way to a weaker Nu $\\propto$ Ra$^{0.19}$. In the regime of Ma $\\ll 1$, a consistent Nu $\\propto$ Ra$^{0.31}$ is retrieved, reminiscent of the Nu $\\propto$ Ra$^{2/7}$ seen in Rayleigh-B\\'{e}nard convection.

  9. DSMC Simulation of High Mach Number Taylor-Couette Flow

    Science.gov (United States)

    Pradhan, Sahadev, , Dr.

    2017-01-01

    The main focus of this work is to characterise the Taylor-Couette flow of an ideal gas between two coaxial cylinders at Mach number Ma = (U_w /√{ kbT_w / m }) in the range 0.01 Boltzmann constant. The cylindrical surfaces are specified as being diffusely reflecting with the thermal accommodation coefficient equal to one. In the present analysis of high Mach number compressible Taylor-Couette flow using DSMC method, wall slip in the temperature and the velocities are found to be significant. Slip occurs because the temperature/velocity of the molecules incident on the wall could be very different from that of the wall, even though the temperature/velocity of the reflected molecules is equal to that of the wall. Due to the high surface speed of the inner cylinder, significant heating of the gas is taking place. The gas temperature increases until the heat transfer to the surface equals the work done in moving the surface. The highest temperature is obtained near the moving surface of the inner cylinder at a radius of about (1.26 r_1).

  10. The Variation of Slat Noise with Mach and Reynolds Numbers

    Science.gov (United States)

    Lockhard, David P.; Choudhari, Meelan M.

    2011-01-01

    The slat noise from the 30P30N high-lift system has been computed using a computational fluid dynamics code in conjunction with a Ffowcs Williams-Hawkings solver. By varying the Mach number from 0.13 to 0.25, the noise was found to vary roughly with the 5th power of the speed. Slight changes in the behavior with directivity angle could easily account for the different speed dependencies reported in the literature. Varying the Reynolds number from 1.4 to 2.4 million resulted in almost no differences, and primarily served to demonstrate the repeatability of the results. However, changing the underlying hybrid Reynolds-averaged-Navier-Stokes/Large-Eddy-Simulation turbulence model significantly altered the mean flow because of changes in the flap separation. However, the general trends observed in both the acoustics and near-field fluctuations were similar for both models.

  11. Turbomachinery for Low-to-High Mach Number Flight

    Science.gov (United States)

    Tan, Choon S.; Shah, Parthiv N.

    2004-01-01

    The thrust capability of turbojet cycles is reduced at high flight Mach number (3+) by the increase in inlet stagnation temperature. The 'hot section' temperature limit imposed by materials technology sets the maximum heat addition and, hence, sets the maximum flight Mach number of the operating envelope. Compressor pre-cooling, either via a heat exchanger or mass-injection, has been suggested as a means to reduce compressor inlet temperature and increase mass flow capability, thereby increasing thrust. To date, however, no research has looked at compressor cooling (i.e., using a compressor both to perform work on the gas path air and extract heat from it simultaneously). We wish to assess the feasibility of this novel concept for use in low-to-high Mach number flight. The results to-date show that an axial compressor with cooling: (1) relieves choking in rear stages (hence opening up operability), (2) yields higher-pressure ratio and (3) yields higher efficiency for a given corrected speed and mass flow. The performance benefit is driven: (i) at the blade passage level, by a decrease in the total pressure reduction coefficient and an increase in the flow turning; and (ii) by the reduction in temperature that results in less work required for a given pressure ratio. The latter is a thermodynamic effect. As an example, calculations were performed for an eight-stage compressor with an adiabatic design pressure ratio of 5. By defining non-dimensional cooling as the percentage of compressor inlet stagnation enthalpy removed by a heat sink, the model shows that a non-dimensional cooling of percent in each blade row of the first two stages can increase the compressor pressure ratio by as much as 10-20 percent. Maximum corrected mass flow at a given corrected speed may increase by as much as 5 percent. In addition, efficiency may increase by as much as 5 points. A framework for characterizing and generating the performance map for a cooled compressor has been developed

  12. The density variance - Mach number relation in isothermal and non-isothermal adiabatic turbulence

    CERN Document Server

    Nolan, Chris A; Sutherland, Ralph S

    2015-01-01

    The density variance - Mach number relation of the turbulent interstellar medium is relevant for theoretical models of the star formation rate, efficiency, and the initial mass function of stars. Here we use high-resolution hydrodynamical simulations with grid resolutions of up to 1024^3 cells to model compressible turbulence in a regime similar to the observed interstellar medium. We use Fyris Alpha, a shock-capturing code employing a high-order Godunov scheme to track large density variations induced by shocks. We investigate the robustness of the standard relation between the logarithmic density variance (sigma_s^2) and the sonic Mach number (M) of isothermal interstellar turbulence, in the non-isothermal regime. Specifically, we test ideal gases with diatomic molecular (gamma = 7/5) and monatomic (gamma = 5/3) adiabatic indices. A periodic cube of gas is stirred with purely solenoidal forcing at low wavenumbers, leading to a fully-developed turbulent medium. We find that as the gas heats in adiabatic comp...

  13. Edge, cavity and aperture tones at very low Mach numbers

    Science.gov (United States)

    Howe, M. S.

    1997-01-01

    This paper discusses self-sustaining oscillations of high-Reynolds-number shear layers and jets incident on edges and corners at infinitesimal Mach number. These oscillations are frequently sources of narrow-band sound, and are usually attributed to the formation of discrete vortices whose interactions with the edge or corner produce impulsive pressures that lead to the formation of new vorticity and complete a feedback cycle of operation. Linearized analyses of these interactions are presented in which free shear layers are modelled by vortex sheets. Detailed results are given for shear flows over rectangular wall apertures and shallow cavities, and for the classical jet edge interaction. The operating stages of self-sustained oscillations are identified with poles in the upper half of the complex frequency plane of a certain impulse response function. It is argued that the real parts of these poles determine the Strouhal numbers of the operating stages observed experimentally for the real, nonlinear system. The response function coincides with the Rayleigh conductivity of the ‘window’ spanned by the shear flow for wall apertures and jet edge interactions, and to a frequency dependent drag coefficient for shallow wall cavities. When the interaction occurs in the neighbourhood of an acoustic resonator, exemplified by the flue organ pipe, the poles are augmented by a sequence of poles whose real parts are close to the resonance frequencies of the resonator, and the resonator can ‘speak’ at one of these frequencies (by extracting energy from the mean flow) provided the corresponding pole has positive imaginary part.

  14. DSMC simulations of leading edge flat-plate boundary layer flows at high Mach number

    Science.gov (United States)

    Pradhan, Sahadev, , Dr.

    2017-01-01

    The flow over a 2D leading-edge flat plate is studied at Mach number Ma = (Uinf /√{kBTinf / m }) in the range Boltzmann constant. The variation of streamwise velocity, temperature, number-density, and mean free path along the wall normal direction away from the plate surface is studied. The qualitative nature of the streamwise velocity at high Mach number is similar to those in the incompressible limit (parabolic profile). However, there are important differences. The amplitudes of the streamwise velocity increase as the Mach number increases and turned into a more flatter profile near the wall. There is significant velocity and temperature slip at the surface of the plate, and the slip increases as the Mach number is increased. It is interesting to note that for the highest Mach numbers considered here, the streamwise velocity at the wall exceeds the sound speed, and the flow is supersonic throughout the flow domain.

  15. Variation with Mach Number of Static and Total Pressures Through Various Screens

    Science.gov (United States)

    Adler, Alfred A

    1946-01-01

    Tests were conducted in the Langley 24-inch highspeed tunnel to ascertain the static-pressure and total-pressure losses through screens ranging in mesh from 3 to 12 wires per inch and in wire diameter from 0.023 to 0.041 inch. Data were obtained from a Mach number of approximately 0.20 up to the maximum (choking) Mach number obtainable for each screen. The results of this investigation indicate that the pressure losses increase with increasing Mach number until the choking Mach number, which can be computed, is reached. Since choking imposes a restriction on the mass rate of flow and maximum losses are incurred at this condition, great care must be taken in selecting the screen mesh and wire dimmeter for an installation so that the choking Mach number is

  16. A Device for Measuring Sonic Velocity and Compressor Mach Number

    Science.gov (United States)

    1948-07-01

    resonator (the only 4 NACA TN No. 1664 accurate measurement required) is measured, as shomn in figure 1, by means of a mercury manometer . The compressor Mach...tube vs not connected to the ccmpressor inlet until after calibration. The pressure in the device was measured by means of the mercury manometer . Fram

  17. Numerical Simulation of Low Mach Number Fluid - Phenomena.

    Science.gov (United States)

    Reitsma, Scott H.

    A method for the numerical simulation of low Mach number (M) fluid-acoustic phenomena is developed. This computational fluid-acoustic (CFA) methodology is based upon a set of conservation equations, termed finite-compressible, derived from the unsteady Navier-Stokes equations. The finite-compressible and more familiar pseudo-compressible equations are compared. The impact of derivation assumptions are examined theoretically and through numerical experimentation. The error associated with these simplifications is shown to be of O(M) and proportional to the amplitude of unsteady phenomena. A computer code for the solution of the finite -compressible equations is developed from an existing pseudo -compressible code. Spatial and temporal discretization issues relevant in the context of near field fluid-acoustic simulations are discussed. The finite volume code employs a MUSCL based third order upwind biased flux difference splitting algorithm for the convective terms. An explicit, three stage, second order Runge-Kutta temporal integration is employed for time accurate simulations while an implicit, approximately factored time quadrature is available for steady state convergence acceleration. The CFA methodology is tested in a series of problems which examine the appropriateness of the governing equations, the exacerbation of spatial truncation errors and the degree of temporal accuracy. Characteristic based boundary conditions employing a spatial formulation are developed. An original non-reflective boundary condition based upon the generalization and extension of existing methods is derived and tested in a series of multi-dimensional problems including those involving viscous shear flows and propagating waves. The final numerical experiment is the simulation of boundary layer receptivity to acoustic disturbances. This represents the first simulation of receptivity at a surface inhomogeneity in which the acoustic phenomena is modeled using physically appropriate

  18. Multiobjective Design Optimization of Supersonic Jet Engine in Different Cruise Mach Numbers

    Science.gov (United States)

    Ogawa, Masamichi; Sato, Tetsuya; Kobayashi, Hiroaki; Taguchi, Hideyuki

    The aim of this paper is to apply a multi-objective optimization generic algorithm (MOGA) to the conceptual design of the hypersonic/supersonic vehicles with different cruise Mach number. The pre-cooled turbojet engine is employed as a propulsion system and some engine parameters such as the precooler size, compressor size, compression ratio and fuel type are varied in the analysis. The result shows that the optimum cruise Mach number is about 4 if hydrogen fuel is used. Methane fuel instead of hydrogen reduces the vehicle gross weight by 33% in case of the Mach 2 vehicle.

  19. Structure of the magnetopause for low Mach number and strongly northward interplanetary magnetic field

    Science.gov (United States)

    Le, G.; Russell, C. T.; Gosling, J. T.

    1994-12-01

    We use International Sun-Earth Explorer (ISEE) magnetic field and plasma data to examine dayside magnetopause crossing under conditions of low Mach number and strongly northward interplanetary magnetic field (IMF). When the solar wind Mach number is low, the IMF stregth and magnetoseath field stregth are large, and we expect the effects of magnetic reconection to be the strongest. When the IMF is strongly northward, we find that the location of the magnetopause boundary layer is very stationary in the space, and we observe many features that are common for both typical and low Mach numbers. However, under low Mach number conditions, we have observed some features that would be expected for cusp reconnection. The boundary layer near the subsolar region contains heated magnetosheath plasma with little hot magnetospheric component that has clearly entered the magnetosphere elsewhere. At least some of the structures present in the boundary layer are impulsive. Inside the boundary layer there is also clear evidence of acceleratedflow from the cusp region for strongly northward IMF at low Mach number. Reconnection beyond the cusp can explain the observed field, plasma, and flow signatures. Therefore at low Mach number, reconection is important in the formation of the boundary layer for northward IMF.

  20. Note: A high Mach number arc-driven shock tube for turbulence studies.

    Science.gov (United States)

    Titus, J B; Alexander, A B; Johnson, J A

    2013-04-01

    A high Mach arc-driven shock tube has been built at the Center for Plasma Science and Technology of Florida A&M University to study shock waves. A larger apparatus with higher voltage was built to study more stable shock waves and subsequent plasmas. Initial measurements of the apparatus conclude that the desired Mach numbers can be reached using only two-thirds the maximum possible energy that the circuit can provide.

  1. Rescaling of the Roe scheme in low Mach-number flow regions

    Science.gov (United States)

    Boniface, Jean-Christophe

    2017-01-01

    A rescaled matrix-valued dissipation is reformulated for the Roe scheme in low Mach-number flow regions from a well known family of local low-speed preconditioners popularized by Turkel. The rescaling is obtained explicitly by suppressing the pre-multiplication of the preconditioner with the time derivative and by deriving the full set of eigenspaces of the Roe-Turkel matrix dissipation. This formulation preserves the time consistency and does not require to reformulate the boundary conditions based on the characteristic theory. The dissipation matrix achieves by construction the proper scaling in low-speed flow regions and returns the original Roe scheme at the sonic line. We find that all eigenvalues are nonnegative in the subsonic regime. However, it becomes necessary to formulate a stringent stability condition to the explicit scheme in the low-speed flow regions based on the spectral radius of the rescaled matrix dissipation. With the large disparity of the eigenvalues in the dissipation matrix, this formulation raises a two-timescale problem for the acoustic waves, which is circumvented for a steady-state iterative procedure by the development of a robust implicit characteristic matrix time-stepping scheme. The behaviour of the modified eigenvalues in the incompressible limit and at the sonic line also suggests applying the entropy correction carefully, especially for complex non-linear flows.

  2. Effect of Mach number on the efficiency of microwave energy deposition in supersonic flow

    Science.gov (United States)

    Lashkov, V. A.; Karpenko, A. G.; Khoronzhuk, R. S.; Mashek, I. Ch.

    2016-05-01

    The article is devoted to experimental and numerical studies of the efficiency of microwave energy deposition into a supersonic flow around the blunt cylinder at different Mach numbers. Identical conditions for energy deposition have been kept in the experiments, thus allowing to evaluate the pure effect of varying Mach number on the pressure drop. Euler equations are solved numerically to model the corresponding unsteady flow compressed gas. The results of numerical simulations are compared to the data obtained from the physical experiments. It is shown that the momentum, which the body receives during interaction of the gas domain modified by microwave discharge with a shock layer before the body, increases almost linearly with rising of Mach number and the efficiency of energy deposition also rises.

  3. Derivation of the low Mach number diphasic system. Numerical simulation in mono-dimensional geometry; Derivation du systeme diphasique bas Mach. Simulation numerique en geometrie monodimensionnelle

    Energy Technology Data Exchange (ETDEWEB)

    Dellacherie, St

    2004-07-01

    This work deals with the derivation of a diphasic low Mach number model obtained through a Mach number asymptotic expansion applied to the compressible diphasic Navier Stokes system, expansion which filters out the acoustic waves. This approach is inspired from the work of Andrew Majda giving the equations of low Mach number combustion for thin flame and for perfect gases. When the equations of state verify some thermodynamic hypothesis, we show that the low Mach number diphasic system predicts in a good way the dilatation or the compression of a bubble and has equilibrium convergence properties. Then, we propose an entropic and convergent Lagrangian scheme in mono-dimensional geometry when the fluids are perfect gases and we propose a first approach in Eulerian variables where the interface between the two fluids is captured with a level set technique. (author)

  4. Dispersive nature of high mach number collisionless plasma shocks: Poynting flux of oblique whistler waves.

    Science.gov (United States)

    Sundkvist, David; Krasnoselskikh, V; Bale, S D; Schwartz, S J; Soucek, J; Mozer, F

    2012-01-13

    Whistler wave trains are observed in the foot region of high Mach number quasiperpendicular shocks. The waves are oblique with respect to the ambient magnetic field as well as the shock normal. The Poynting flux of the waves is directed upstream in the shock normal frame starting from the ramp of the shock. This suggests that the waves are an integral part of the shock structure with the dispersive shock as the source of the waves. These observations lead to the conclusion that the shock ramp structure of supercritical high Mach number shocks is formed as a balance of dispersion and nonlinearity.

  5. Increased Mach Number Capability for the NASA Glenn 10x10 Supersonic Wind Tunnel

    Science.gov (United States)

    Slater, J. W.; Saunders, J. D.

    2015-01-01

    Computational simulations and wind tunnel testing were conducted to explore the operation of the Abe Silverstein Supersonic Wind Tunnel at the NASA Glenn Research Center at test section Mach numbers above the current limit of Mach 3.5. An increased Mach number would enhance the capability for testing of supersonic and hypersonic propulsion systems. The focus of the explorations was on understanding the flow within the second throat of the tunnel, which is downstream of the test section and is where the supersonic flow decelerates to subsonic flow. Methods of computational fluid dynamics (CFD) were applied to provide details of the shock boundary layer structure and to estimate losses in total pressure. The CFD simulations indicated that the tunnel could be operated up to Mach 4.0 if the minimum width of the second throat was made smaller than that used for previous operation of the tunnel. Wind tunnel testing was able to confirm such operation of the tunnel at Mach 3.6 and 3.7 before a hydraulic failure caused a stop to the testing. CFD simulations performed after the wind tunnel testing showed good agreement with test data consisting of static pressures along the ceiling of the second throat. The CFD analyses showed increased shockwave boundary layer interactions, which was also observed as increased unsteadiness of dynamic pressures collected in the wind tunnel testing.

  6. Influence of Mach number and static pressure on plasma flow control of supersonic and rarefied flows around a sharp flat plate

    Science.gov (United States)

    Coumar, Sandra; Lago, Viviana

    2017-06-01

    This paper presents an experimental investigation, carried out at the Icare Laboratory by the FAST team, focusing on plasma flow control in supersonic and rarefied regime. The study analyzes how the Mach number as well as the ambient pressure modify the repercussions of the plasma actuator on the shock wave. It follows previous experiments performed in the MARHy (ex-SR3) wind tunnel with a Mach 2 flow interacting with a sharp flat plate, where modifications induced by a plasma actuator were observed. The flat plate was equipped with a plasma actuator composed of two aluminum electrodes. The upstream one was biased with a negative DC potential and thus, created a glow discharge type plasma. Experimental measurements showed that the boundary layer thickness and the shock wave angle increased when the discharge was ignited. The current work was performed with two nozzles generating Mach 4 flows but at two different static pressures: 8 and 71 Pa. These nozzles were chosen to study independently the impact of the Mach number and the impact of the pressure on the flow behavior. In the range of the discharge current considered in this experimental work, it was observed that the shock wave angle increased with the discharge current of +15% for the Mach 2 flow but the increase rate doubled to +28% for the Mach 4 flow at the same static pressure, showing that the discharge effect is even more significant when boosting the flow speed. When studying the effect of the discharge on the Mach 4 flow at higher static pressure, it was observed that the topology of the plasma changed drastically and the increase in the shock wave angle with the discharge current of +21 %.

  7. Nonlinear theory of nonstationary low Mach number channel flows of freely cooling nearly elastic granular gases.

    Science.gov (United States)

    Meerson, Baruch; Fouxon, Itzhak; Vilenkin, Arkady

    2008-02-01

    We employ hydrodynamic equations to investigate nonstationary channel flows of freely cooling dilute gases of hard and smooth spheres with nearly elastic particle collisions. This work focuses on the regime where the sound travel time through the channel is much shorter than the characteristic cooling time of the gas. As a result, the gas pressure rapidly becomes almost homogeneous, while the typical Mach number of the flow drops well below unity. Eliminating the acoustic modes and employing Lagrangian coordinates, we reduce the hydrodynamic equations to a single nonlinear and nonlocal equation of a reaction-diffusion type. This equation describes a broad class of channel flows and, in particular, can follow the development of the clustering instability from a weakly perturbed homogeneous cooling state to strongly nonlinear states. If the heat diffusion is neglected, the reduced equation becomes exactly soluble, and the solution develops a finite-time density blowup. The blowup has the same local features at singularity as those exhibited by the recently found family of exact solutions of the full set of ideal hydrodynamic equations [I. Fouxon, Phys. Rev. E 75, 050301(R) (2007); I. Fouxon,Phys. Fluids 19, 093303 (2007)]. The heat diffusion, however, always becomes important near the attempted singularity. It arrests the density blowup and brings about previously unknown inhomogeneous cooling states (ICSs) of the gas, where the pressure continues to decay with time, while the density profile becomes time-independent. The ICSs represent exact solutions of the full set of granular hydrodynamic equations. Both the density profile of an ICS and the characteristic relaxation time toward it are determined by a single dimensionless parameter L that describes the relative role of the inelastic energy loss and heat diffusion. At L>1 the intermediate cooling dynamics proceeds as a competition between "holes": low-density regions of the gas. This competition resembles Ostwald

  8. DNS study on shock/turbulence interaction in homogeneous isotropic turbulence at low turbulent Mach number

    Science.gov (United States)

    Tanaka, Kento; Watanabe, Tomoaki; Nagata, Koji; Sasoh, Akihiro; Sakai, Yasuhiko; Hayase, Toshiyuki; Nagoya Univ Collaboration

    2016-11-01

    The interaction between homogeneous isotropic turbulence and normal shock wave is investigated by direct numerical simulations (DNSs). In the DNSs, a normal shock wave with a shock Mach number 1.1 passes through homogeneous isotropic turbulence with a low turbulent Mach number and a moderate turbulent Reynolds number. The statistics are calculated conditioned on the distance from the shock wave. The results showed that the shock wave makes length scales related to turbulence small. This effect is significant for the Taylor microscale defined with the velocity derivative orthogonal to the shock wave. The decrease in the Kolmogorov scale is also found. Statistics of velocity derivative are found to be changed by the shock wave propagation. The shock wave causes enstrophy amplification due to the dilatation/vorticity interaction. By this interaction, the vorticity components parallel to the shock wave is more amplified than the normal component. The strain rate is also amplified by the shock wave.

  9. Mach number scaling of helicopter rotor blade/vortex interaction noise

    Science.gov (United States)

    Leighton, Kenneth P.; Harris, Wesley L.

    1985-01-01

    A parametric study of model helicopter rotor blade slap due to blade vortex interaction (BVI) was conducted in a 5 by 7.5-foot anechoic wind tunnel using model helicopter rotors with two, three, and four blades. The results were compared with a previously developed Mach number scaling theory. Three- and four-bladed rotor configurations were found to show very good agreement with the Mach number to the sixth power law for all conditions tested. A reduction of conditions for which BVI blade slap is detected was observed for three-bladed rotors when compared to the two-bladed baseline. The advance ratio boundaries of the four-bladed rotor exhibited an angular dependence not present for the two-bladed configuration. The upper limits for the advance ratio boundaries of the four-bladed rotors increased with increasing rotational speed.

  10. Two-dimensional lattice Boltzmann model for compressible flows with high Mach number

    Science.gov (United States)

    Gan, Yanbiao; Xu, Aiguo; Zhang, Guangcai; Yu, Xijun; Li, Yingjun

    2008-03-01

    In this paper we present an improved lattice Boltzmann model for compressible Navier-Stokes system with high Mach number. The model is composed of three components: (i) the discrete-velocity-model by M. Watari and M. Tsutahara [Phys. Rev. E 67 (2003) 036306], (ii) a modified Lax-Wendroff finite difference scheme where reasonable dissipation and dispersion are naturally included, (iii) artificial viscosity. The improved model is convenient to compromise the high accuracy and stability. The included dispersion term can effectively reduce the numerical oscillation at discontinuity. The added artificial viscosity helps the scheme to satisfy the von Neumann stability condition. Shock tubes and shock reflections are used to validate the new scheme. In our numerical tests the Mach numbers are successfully increased up to 20 or higher. The flexibility of the new model makes it suitable for tracking shock waves with high accuracy and for investigating nonlinear nonequilibrium complex systems.

  11. Flow-induced cylinder noise formulated as a diffraction problem for low Mach numbers

    Science.gov (United States)

    Gloerfelt, X.; Pérot, F.; Bailly, C.; Juvé, D.

    2005-10-01

    The role of surfaces in the mechanism of sound generation by low Mach number flows interacting with solid nonvibrating surfaces is well established by the classical aeroacoustic papers by Powell, Doak, Ffowcs Williams, Crighton, or Howe. It can be formulated as a problem of diffraction of the flow sources by the rigid body. The present study illustrates this statement in the case of flow-induced cylinder noise. Curle's formulation is analytically and numerically compared to a formulation based on an exact Green's function tailored to a cylindrical geometry. The surface integral of Curle's formulation represents exactly the diffraction effects by the rigid body. The direct and scattered parts of the sound field are studied. In this low Mach number configuration, the cylinder is compact, and the scattered (dipole) field dominates the direct (quadrupole) field. The classical properties of the scattering by a cylinder are retrieved by considering a point quadripole source near the cylinder surface.

  12. The Density Variance--Mach Number Relation in Supersonic Turbulence: I. Isothermal, magnetised gas

    CERN Document Server

    Molina, F Z; Federrath, C; Klessen, R S

    2012-01-01

    It is widely accepted that supersonic, magnetised turbulence plays a fundamental role for star formation in molecular clouds. It produces the initial dense gas seeds out of which new stars can form. However, the exact relation between gas compression, turbulent Mach number, and magnetic field strength is still poorly understood. Here, we introduce and test an analytical prediction for the relation between the density variance and the root-mean-square Mach number in supersonic, isothermal, magnetised turbulent flows. We approximate the density and velocity structure of the interstellar medium as a superposition of shock waves. We obtain the density contrast considering the momentum continuity equation for a single magnetised shock and extrapolate this result to the entire cloud. Depending on the field geometry, we then make three different assumptions based on observational and theoretical constraints: B independent of density, B proportional to the root square of the density and B proportional to the density....

  13. Axisymmetric vortex method for low-Mach number, diffusion-controlled combustion

    CERN Document Server

    Lakkis, I

    2003-01-01

    A grid-free, Lagrangian method for the accurate simulation of low-Mach number, variable-density, diffusion-controlled reacting flow is presented. A fast-chemistry model in which the conversion rate of reactants to products is limited by the local mixing rate is assumed in order to reduce the combustion problem to the solution of a convection-diffusion-generation equation with volumetric expansion and vorticity generation at the reaction fronts. The solutions of the continuity and vorticity equations, and the equations governing the transport of species and energy, are obtained using a formulation in which particles transport conserved quantities by convection and diffusion. The dynamic impact of exothermic combustion is captured through accurate integration of source terms in the vorticity transport equations at the location of the particles, and the extra velocity field associated with volumetric expansion at low Mach number computed to enforced mass conservation. The formulation is obtained for an axisymmet...

  14. Low Mach and Peclet number limit for a model of stellar tachocline and upper radiative zones

    Directory of Open Access Journals (Sweden)

    Donatella Donatelli

    2016-09-01

    Full Text Available We study a hydrodynamical model describing the motion of internal stellar layers based on compressible Navier-Stokes-Fourier-Poisson system. We suppose that the medium is electrically charged, we include energy exchanges through radiative transfer and we assume that the system is rotating. We analyze the singular limit of this system when the Mach number, the Alfven number, the Peclet number and the Froude number approache zero in a certain way and prove convergence to a 3D incompressible MHD system with a stationary linear transport equation for transport of radiation intensity. Finally, we show that the energy equation reduces to a steady equation for the temperature corrector.

  15. Nearfield Unsteady Pressures at Cruise Mach Numbers for a Model Scale Counter-Rotation Open Rotor

    Science.gov (United States)

    Stephens, David B.

    2012-01-01

    An open rotor experiment was conducted at cruise Mach numbers and the unsteady pressure in the nearfield was measured. The system included extensive performance measurements, which can help provide insight into the noise generating mechanisms in the absence of flow measurements. A set of data acquired at a constant blade pitch angle but various rotor speeds was examined. The tone levels generated by the front and rear rotor were found to be nearly equal when the thrust was evenly balanced between rotors.

  16. Asymptotic preserving IMEX finite volume schemes for low Mach number Euler equations with gravitation

    Science.gov (United States)

    Bispen, Georgij; Lukáčová-Medvid'ová, Mária; Yelash, Leonid

    2017-04-01

    In this paper we will present and analyze a new class of the IMEX finite volume schemes for the Euler equations with a gravity source term. We will in particular concentrate on a singular limit of weakly compressible flows when the Mach number M ≪ 1. In order to efficiently resolve slow dynamics we split the whole nonlinear system in a stiff linear part governing the acoustic and gravity waves and a non-stiff nonlinear part that models nonlinear advection effects. For time discretization we use a special class of the so-called globally stiffly accurate IMEX schemes and approximate the stiff linear operator implicitly and the non-stiff nonlinear operator explicitly. For spatial discretization the finite volume approximation is used with the central and Rusanov/Lax-Friedrichs numerical fluxes for the linear and nonlinear subsystem, respectively. In the case of a constant background potential temperature we prove theoretically that the method is asymptotically consistent and asymptotically stable uniformly with respect to small Mach number. We also analyze experimentally convergence rates in the singular limit when the Mach number tends to zero.

  17. Particle-in-cell simulations of particle energization from low Mach number fast mode shocks

    CERN Document Server

    Park, Jaehong; Blackman, Eric G; Ren, Chuang; Siller, Robert

    2012-01-01

    Astrophysical shocks are often studied in the high Mach number limit but weakly compressive fast shocks can occur in magnetic reconnection outflows and are considered to be a site of particle energization in solar flares. Here we study the microphysics of such perpendicular, low Mach number collisionless shocks using two-dimensional particle-in-cell (PIC) simulations with a reduced ion/electron mass ratio and employ a moving wall boundary method for initial generation of the shock. This moving wall method allows for more control of the shock speed, smaller simulation box sizes, and longer simulation times than the commonly used fixed wall, reflection method of shock formation. Our results, which are independent of the shock formation method, reveal the prevalence shock drift acceleration (SDA) of both electron and ions in a purely perpendicular shock with Alfv\\'en Mach number $M_A=6.8$ and ratio of thermal to magnetic pressure $\\beta=8$. We determine the respective minimum energies required for electrons and ...

  18. A half-explicit, non-split projection method for low Mach number flows.

    Energy Technology Data Exchange (ETDEWEB)

    Pousin, Jerome G. (National Institute for Applied Sciences, France); Najm, Habib N.; Pebay, Philippe Pierre

    2004-02-01

    In the context of the direct numerical simulation of low MACH number reacting flows, the aim of this article is to propose a new approach based on the integration of the original differential algebraic (DAE) system of governing equations, without further differentiation. In order to do so, while preserving a possibility of easy parallelization, it is proposed to use a one-step index 2 DAE time-integrator, the Half Explicit Method (HEM). In this context, we recall why the low MACH number approximation belongs to the class of index 2 DAEs and discuss why the pressure can be associated with the constraint. We then focus on a fourth-order HEM scheme, and provide a formulation that makes its implementation more convenient. Practical details about the consistency of initial conditions are discussed, prior to focusing on the implicit solve involved in the method. The method is then evaluated using the Modified KAPS Problem, since it has some of the features of the low MACH number approximation. Numerical results are presented, confirming the above expectations. A brief summary of ongoing efforts is finally provided.

  19. High initial amplitude and high Mach number effects on the evolution of the single-mode Richtmyer-Meshkov instability.

    Science.gov (United States)

    Rikanati, A; Oron, D; Sadot, O; Shvarts, D

    2003-02-01

    Effects of high-Mach numbers and high initial amplitudes on the evolution of the single-mode Richtmyer-Meshkov shock-wave induced hydrodynamic instability are studied using theoretical models, experiments, and numerical simulations. Two regimes in which there is a significant deviation from the linear dependence of the initial velocity on the initial perturbation amplitude are defined and characterized. In one, the observed reduction of the initial velocity is primarily due to large initial amplitudes. This effect is accurately modeled by a vorticity deposition model, quantifying both the effect of the initial perturbation amplitude and the exact shape of the interface. In the other, the reduction is dominated by the proximity of the shock wave to the interface. This effect is modeled by a modified incompressible model where the shock wave is mimicked by a moving bounding wall. These results are supplemented with high initial amplitude Mach 1.2 shock-tube experiments, enabling separation of the two effects. It is shown that in most of the previous experiments, the observed reduction is predominantly due to the effect of high initial amplitudes.

  20. The Cosmic Mach Number: Comparison from Observations, Numerical Simulations and Nonlinear Predictions

    CERN Document Server

    Agarwal, Shankar

    2013-01-01

    We calculate the cosmic Mach number M - the ratio of the bulk flow of the velocity field on scale R to the velocity dispersion within regions of scale R. M is effectively a measure of the ratio of large-scale to small-scale power and can be a useful tool to constrain the cosmological parameter space. Using a compilation of existing peculiar velocity surveys, we calculate M and compare it to that estimated from mock catalogues extracted from the LasDamas (a LCDM cosmology) numerical simulations. We find agreement with expectations for the LasDamas cosmology at ~ 1.5 sigma CL. We also show that our Mach estimates for the mocks are not biased by selection function effects. To achieve this, we extract dense and nearly-isotropic distributions using Gaussian selection functions with the same width as the characteristic depth of the real surveys, and show that the Mach numbers estimated from the mocks are very similar to the values based on Gaussian profiles of the corresponding widths. We discuss the importance of ...

  1. Particle-in-cell simulations of particle energization via shock drift acceleration from low Mach number quasi-perpendicular shocks in solar flares

    CERN Document Server

    Park, Jaehong; Workman, Jared C; Blackman, Eric G

    2012-01-01

    Low Mach number, high beta fast mode shocks can occur in the magnetic reconnection outflows of solar flares. These shocks, which occur above flare loop tops, may provide the electron energization responsible for some of the observed hard X-rays and contemporaneous radio emission. Here we present new 2D particle-in-cell simulations of low Mach number/high beta quasi-perpendicular shocks. The simulations show that electrons above a certain energy threshold experience shock-drift-acceleration. The transition energy between the thermal and non-thermal spectrum and the spectral index from the simulations are consistent with some of the X-ray spectra from RHESSI in the energy regime, $E\\lesssim 40\\sim 100$ keV. Plasma instabilities associated with the shock structure such as the modified-two-stream and the electron whistler/mirror instabilities are examined and compared with the numerical solutions of the kinetic dispersion relations.

  2. A tabulation of pipe length to diameter ratios as a function of Mach number and pressure ratios for compressible flow

    Science.gov (United States)

    Dixon, G. V.; Barringer, S. R.; Gray, C. E.; Leatherman, A. D.

    1975-01-01

    Computer programs and resulting tabulations are presented of pipeline length-to-diameter ratios as a function of Mach number and pressure ratios for compressible flow. The tabulations are applicable to air, nitrogen, oxygen, and hydrogen for compressible isothermal flow with friction and compressible adiabatic flow with friction. Also included are equations for the determination of weight flow. The tabulations presented cover a wider range of Mach numbers for choked, adiabatic flow than available from commonly used engineering literature. Additional information presented, but which is not available from this literature, is unchoked, adiabatic flow over a wide range of Mach numbers, and choked and unchoked, isothermal flow for a wide range of Mach numbers.

  3. Mach Number Dependence of Turbulent Magnetic Field Amplification: Solenoidal versus Compressive Flows

    CERN Document Server

    Federrath, Christoph; Schober, Jennifer; Banerjee, Robi; Klessen, Ralf S; Schleicher, Dominik R G; 10.1103/PhysRevLett.107.114504

    2011-01-01

    We study the growth rate and saturation level of the turbulent dynamo in magnetohydrodynamical simulations of turbulence, driven with solenoidal (divergence-free) or compressive (curl-free) forcing. For models with Mach numbers ranging from 0.02 to 20, we find significantly different magnetic field geometries, amplification rates, and saturation levels, decreasing strongly at the transition from subsonic to supersonic flows, due to the development of shocks. Both extreme types of turbulent forcing drive the dynamo, but solenoidal forcing is more efficient, because it produces more vorticity.

  4. The Experimental Measurement of Aerodynamic Heating About Complex Shapes at Supersonic Mach Numbers

    Science.gov (United States)

    Neumann, Richard D.; Freeman, Delma C.

    2011-01-01

    In 2008 a wind tunnel test program was implemented to update the experimental data available for predicting protuberance heating at supersonic Mach numbers. For this test the Langley Unitary Wind Tunnel was also used. The significant differences for this current test were the advances in the state-of-the-art in model design, fabrication techniques, instrumentation and data acquisition capabilities. This current paper provides a focused discussion of the results of an in depth analysis of unique measurements of recovery temperature obtained during the test.

  5. Effects of nonuniform Mach-number entrance on scramjet nozzle flowfield and performance

    Science.gov (United States)

    Zhang, Pu; Xu, Jinglei; Quan, Zhibin; Mo, Jianwei

    2016-12-01

    Considering the non-uniformities of nozzle entrance influenced by the upstream, the effects of nonuniform Mach-number coupled with shock and expansion-wave on the flowfield and performances of single expansion ramp nozzle (SERN) are numerically studied using Reynolds-Averaged Navier-Stokes equations. The adopted Reynolds-averaged Navier-Stokes methodology is validated by comparing the numerical results with the cold experimental data, and the average method used in this paper is discussed. Uniform and nonuniform facility nozzles are designed to generate different Mach-number profile for the inlet of SERN, which is direct-connected with different facility nozzle, and the whole flowfield is simulated. Because of the coupling of shock and expansion-wave, flow direction of nonuniform SERN entrance is distorted. Compared with Mach contour of uniform case, the line is more curved for coupling shock-wave entrance (SWE) case, and flatter for the coupling expansion-wave entrance (EWE) case. Wall pressure distribution of SWE case appears rising region, whereas decreases like stairs of EWE case. The numerical results reveal that the coupled shock and expansion-wave play significant roles on nozzle performances. Compared with the SERN performances of uniform entrance case at the same work conditions, the thrust of nonuniform entrance cases reduces by 3-6%, pitch moment decreases by 2.5-7%. The negative lift presents an incremental trend with EWE while the situation is the opposite with SWE. These results confirm that considering the entrance flow parameter nonuniformities of a scramjet nozzle coupled with shock or expansion-wave from the upstream is necessary.

  6. Specularly reflected He sup 2+ at high Mach number quasi-parallel shocks

    Energy Technology Data Exchange (ETDEWEB)

    Fuselier, S.A.; Lennartsson, O.W. (Lockheed Palo Alto Research Lab., CA (United States)); Thomsen, M.F. (Los Alamos National Lab., NM (United States)); Russell, C.T. (Univ. of California, Los Angeles (United States))

    1990-04-01

    Upstream from the Earth's quasi-parallel bow shock, the Lockheed Plasma Composition Experiment on ISEE 1 often observes two types of suprathermal He{sup 2+} distributions. Always present to some degree is an energetic (several keV/eto 17.4 keV/e, the maximum energy of the detector) diffuse He{sup 2+} distribution. Sometimes, apparently when the Alfven Mach number, M{sub A}, is high enough and the spacecraft is near the shock (within a few minutes of a crossing), a second type of suprathermal He{sup 2+} distribution is also observed. This nongyrotropic, gyrating He{sup 2+} distribution has velocity components parallel and perpendicular to the magnetic field that are consistent with near-specular reflection of a portion of the incident solar wind He{sup 2+} distribution off the shock. Specularly reflected and diffuse proton distributions are associated with these gyrating He{sup 2+} distributions. The presence of these gyrating He{sup 2+} distributions suggests that specular reflection is controlled primarily by magnetic forces in high Mach number quasi-parallel shocks and that these distributions may be a seed population for more energetic diffuse He{sup 2+} distributions.

  7. The influence of incident shock Mach number on radial incident shock wave focusing

    Directory of Open Access Journals (Sweden)

    Xin Chen

    2016-04-01

    Full Text Available Experiments and numerical simulations were carried out to investigate radial incident shock focusing on a test section where the planar incident shock wave was divided into two identical ones. A conventional shock tube was used to generate the planar shock. Incident shock Mach number of 1.51, 1.84 and 2.18 were tested. CCD camera was used to obtain the schlieren photos of the flow field. Third-order, three step strong-stability-preserving (SSP Runge-Kutta method, third-order weighed essential non-oscillation (WENO scheme and adaptive mesh refinement (AMR algorithm were adopted to simulate the complicated flow fields characterized by shock wave interaction. Good agreement between experimental and numerical results was observed. Complex shock wave configurations and interactions (such as shock reflection, shock-vortex interaction and shock focusing were observed in both the experiments and numerical results. Some new features were observed and discussed. The differences of structure of flow field and the variation trends of pressure were compared and analyzed under the condition of different Mach numbers while shock wave focusing.

  8. A NOVEL SLIGHTLY COMPRESSIBLE MODEL FOR LOW MACH NUMBER PERFECT GAS FLOW CALCULATION

    Institute of Scientific and Technical Information of China (English)

    邓小刚; 庄逢甘

    2002-01-01

    By analyzing the characteristics of low Mach number perfect gas flows, a novel Slightly Compressible Model (SCM) for low Mach number perfect gas flows is derived. In view of numerical calculations, this model is proved very efficient,for it is kept within the p-v frame but does not have to satisfy the time consuming divergence-free condition in order to get the incompressible Navier-Stokes equation solutions. Writing the equations in the form of conservation laws, we have derived the characteristic systems which are necessary for numerical calculations. A cellcentered finite-volume method with flux difference upwind-biased schemes is used for the equation solutions and a new Exact Newton Relaxation (ENR) implicit method is developed. Various computed results are presented to validate the present model.Laminar flow solutions over a circular cylinder with wake developing and vortex shedding are presented. Results for inviscid flow over a sphere are compared in excellent agreement with the exact analytic incompressible solution. Three-dimensional viscous flow solutions over sphere and prolate spheroid are also calculated and compared well with experiments and other incompressible solutions. Finally, good convergent performaces are shown for sphere viscous flows.

  9. Airfoil Aeroelastic Flutter Analysis Based on Modified Leishman-Beddoes Model at Low Mach Number

    Institute of Scientific and Technical Information of China (English)

    SHAO Song; ZHU Qinghua; ZHANG Chenglin; NI Xianping

    2011-01-01

    Based on modified Leishman-Beddoes(L-B)state space model at low Mach number(lower than 0.3),the airfoil aeroelastic system is presented in this paper.The main modifications for L-B model include a new dynamic stall criterion and revisions of normal force and pitching moment coefficient.The bifurcation diagrams,the limit cycle oscillation (LCO)phase plane plots and the time domain response figures are applied to investigating the stall flutter bifurcation behavior of airfoil aeroelastic systems with symmetry or asymmetry.It is shown that the symmetric periodical oscillation happens after subcritical bifurcation caused by dynamic stall,and the asymmetric periodical oscillation,which is caused by the interaction of dynamic stall and static divergence,only happens in the airfoil aeroelastic system with asymmetry.Validations of the modified L-B model and the airfoil aeroelastic system are presented with the experimental airload data of NACA0012 and OA207 and experimental stall flutter data of NACA0012 respectively.Results demonstrate that the airfoil aeroelastic system presented in this paper is effective and accurate,which can be applied to the investigation of airfoil stall flutter at low Mach number.

  10. Opacity Broadening of $^{13}$CO Linewidths and its Effect on the Variance-Sonic Mach Number Relation

    CERN Document Server

    Correia, Caio; Lazarian, Alex; Ossenkopf, Volker; Stutzki, Jürgen; Kainulainen, Jouni; Kowal, Grzegorz; de Medeiros, José Renan

    2014-01-01

    We study how the estimation of the sonic Mach number ($M_s$) from $^{13}$CO linewidths relates to the actual 3D sonic Mach number. For this purpose we analyze MHD simulations which include post-processing to take radiative transfer effects into account. As expected, we find very good agreement between the linewidth estimated sonic Mach number and the actual sonic Mach number of the simulations for optically thin tracers. However, we find that opacity broadening causes $M_s$ to be overestimated by a factor of ~ 1.16 - 1.3 when calculated from optically thick $^{13}$CO lines. We also find that there is a dependency on the magnetic field: super-Alfv\\'enic turbulence shows increased line broadening as compared with sub-Alfv\\'enic turbulence for all values of optical depth for supersonic turbulence. Our results have implications for the observationally derived sonic Mach number--density standard deviation ($\\sigma_{\\rho/}$) relationship, $\\sigma^2_{\\rho/}=b^2M_s^2$, and the related column density standard deviatio...

  11. Parametric investigation of single-expansion-ramp nozzles at Mach numbers from 0.60 to 1.20

    Science.gov (United States)

    Capone, Francis J.; Re, Richard J.; Bare, E. Ann

    1992-01-01

    An investigation was conducted in the Langley 16-Foot Transonic Tunnel to determine the effects of varying six nozzle geometric parameters on the internal and aeropropulsive performance characteristics of single-expansion-ramp nozzles. This investigation was conducted at Mach numbers from 0.60 to 1.20, nozzle pressure ratios from 1.5 to 12, and angles of attack of 0 deg +/- 6 deg. Maximum aeropropulsive performance at a particular Mach number was highly dependent on the operating nozzle pressure ratio. For example, as the nozzle upper ramp length or angle increased, some nozzles had higher performance at a Mach number of 0.90 because of the nozzle design pressure was the same as the operating pressure ratio. Thus, selection of the various nozzle geometric parameters should be based on the mission requirements of the aircraft. A combination of large upper ramp and large lower flap boattail angles produced greater nozzle drag coefficients at Mach number greater than 0.80, primarily from shock-induced separation on the lower flap of the nozzle. A static conditions, the convergent nozzle had high and nearly constant values of resultant thrust ratio over the entire range of nozzle pressure ratios tested. However, these nozzles had much lower aeropropulsive performance than the convergent-divergent nozzle at Mach number greater than 0.60.

  12. Tests of Full-Scale Helicopter Rotors at High Advancing Tip Mach Numbers and Advance Ratios

    Science.gov (United States)

    Biggers, James C.; McCloud, John L., III; Stroub, Robert H.

    2015-01-01

    As a continuation of the studies of reference 1, three full-scale helicopter rotors have been tested in the Ames Research Center 40- by SO-foot wind tunnel. All three of them were two-bladed, teetering rotors. One of the rotors incorporated the NACA 0012 airfoil section over the entire length of the blade. This rotor was tested at advance ratios up to 1.05. Both of the other rotors were tapered in thickness and incorporated leading-edge camber over the outer 20 percent of the blade radius. The larger of these rotors was tested at advancing tip Mach numbers up to 1.02. Data were obtained for a wide range of lift and propulsive force, and are presented without discussion.

  13. On the proper Mach number and ratio of specific heats for modeling the Venus bow shock

    Science.gov (United States)

    Tatrallyay, M.; Russell, C. T.; Luhmann, J. G.; Barnes, A.; Mihalov, J. D.

    1984-01-01

    Observational data from the Pioneer Venus Orbiter are used to investigate the physical characteristics of the Venus bow shock, and to explore some general issues in the numerical simulation of collisionless shocks. It is found that since equations from gas-dynamic (GD) models of the Venus shock cannot in general replace MHD equations, it is not immediately obvious what the optimum way is to describe the desired MHD situation with a GD code. Test case analysis shows that for quasi-perpendicular shocks it is safest to use the magnetospheric Mach number as an input to the GD code. It is also shown that when comparing GD predicted temperatures with MHD predicted temperatures total energy should be compared since the magnetic energy density provides a significant fraction of the internal energy of the MHD fluid for typical solar wind parameters. Some conclusions are also offered on the properties of the terrestrial shock.

  14. Relativistic Electron Shock Drift Acceleration in Low Mach Number Galaxy Cluster Shocks

    CERN Document Server

    Matsukiyo, Shuichi; Yamazaki, Ryo; Umeda, Takayuki

    2011-01-01

    An extreme case of electron shock drift acceleration in low Mach number collisionless shocks is investigated as a plausible mechanism of initial acceleration of relativistic electrons in large-scale shocks in galaxy clusters where upstream plasma temperature is of the order of 10 keV and a degree of magnetization is not too small. One-dimensional electromagnetic full particle simulations reveal that, even though a shock is rather moderate, a part of thermal incoming electrons are accelerated and reflected through relativistic shock drift acceleration and form a local nonthermal population just upstream of the shock. The accelerated electrons can self-generate local coherent waves and further be back-scattered toward the shock by those waves. This may be a scenario for the first stage of the electron shock acceleration occurring at the large-scale shocks in galaxy clusters such as CIZA J2242.8+5301 which has well defined radio relics.

  15. Low-Mach-number turbulence in interstellar gas revealed by radio polarization gradients

    CERN Document Server

    Gaensler, Bryan M; Burkhart, Blakesley; Newton-McGee, Katherine J; Ekers, Ronald D; Lazarian, Alex; McClure-Griffiths, Naomi M; Robishaw, Timothy; Dickey, John M; Green, Anne J; 10.1038/nature10446

    2011-01-01

    The interstellar medium of the Milky Way is multi-phase, magnetized and turbulent. Turbulence in the interstellar medium produces a global cascade of random gas motions, spanning scales ranging from 100 parsecs to 1000 kilometres. Fundamental parameters of interstellar turbulence such as the sonic Mach number (the speed of sound) have been difficult to determine because observations have lacked the sensitivity and resolution to directly image the small-scale structure associated with turbulent motion. Observations of linear polarization and Faraday rotation in radio emission from the Milky Way have identified unusual polarized structures that often have no counterparts in the total radiation intensity or at other wavelengths, and whose physical significance has been unclear. Here we report that the gradient of the Stokes vector (Q,U), where Q and U are parameters describing the polarization state of radiation, provides an image of magnetized turbulence in diffuse ionized gas, manifested as a complex filamenta...

  16. On the Relevance of Low-Mach-Number Asymptotics in Thermodynamics of Heterogeneous, Immiscible Mixtures

    Science.gov (United States)

    Varsakelis, Christos; Papalexandris, Miltiadis V.

    2017-01-01

    A conundrum in non-equilibrium thermodynamics of heterogeneous mixtures with microstructure concerns the selection of thermodynamic currents and forces in the entropy production rate from the multitude of available options. The objective of this article is to demonstrate that the low-Mach-number approximation can narrow down this ambiguity. More specifically, by postulating that the post-constitutive equations are well behaved with respect to this perturbation analysis we assert that thermal non-equilibrium should be chosen as an independent force even if this requires the explicit manipulation of the entropy inequality. According to our analysis, alternative choices result in post-constitutive equations; the incompressible limit of which gives rise to questionable predictions.

  17. Electron acceleration in a nonrelativistic shock with very high Alfv\\'en Mach number

    CERN Document Server

    Matsumoto, Y; Hoshino, M

    2013-01-01

    Electron acceleration associated with various plasma kinetic instabilities in a nonrelativistic, very-high-Alfv\\'en Mach-number ($M_A \\sim 45$) shock is revealed by means of a two-dimensional fully kinetic PIC simulation. Electromagnetic (ion Weibel) and electrostatic (ion-acoustic and Buneman) instabilities are strongly activated at the same time in different regions of the two-dimensional shock structure. Relativistic electrons are quickly produced predominantly by the shock surfing mechanism with the Buneman instability at the leading edge of the foot. The energy spectrum has a high-energy tail exceeding the upstream ion kinetic energy accompanying the main thermal population. This gives a favorable condition for the ion acoustic instability at the shock front, which in turn results in additional energization. The large-amplitude ion Weibel instability generates current sheets in the foot, implying another dissipation mechanism via magnetic reconnection in a three-dimensional shock structure in the very-hi...

  18. Effects of the Mach number on the evolution of vortex-surface fields in compressible Taylor-Green flows

    Science.gov (United States)

    Peng, Naifu; Yang, Yue

    2016-11-01

    We investigate the evolution of vortex-surface fields (VSFs) in viscous compressible Taylor-Green flows. The VSF is applied to the direct numerical simulation of the Taylor-Green flows at a range of Mach numbers from Ma = 0 . 6 to Ma = 2 . 2 for characterizing the Mach-number effects on evolving vortical structures. We find that the dilatation and baroclinic force strongly influence the geometry of vortex surfaces and the energy dissipation rate in the transitional stage. The vortex tubes in compressible flows are less curved than those in incompressible flows, and the maximum dissipation rate occurs earlier in high-Mach-number flows perhaps owing to the conversion of kinetic energy into heat. Moreover, the relations between the evolutionary geometry of vortical structures and flow statistics are discussed. This work has been supported in part by the National Natural Science Foundation of China (Grant Nos. 11522215 and 11521091), and the Thousand Young Talents Program of China.

  19. Generation and Evolution of High-Mach-Number Laser-Driven Magnetized Collisionless Shocks in the Laboratory

    Science.gov (United States)

    Schaeffer, D. B.; Fox, W.; Haberberger, D.; Fiksel, G.; Bhattacharjee, A.; Barnak, D. H.; Hu, S. X.; Germaschewski, K.

    2017-07-01

    We present the first laboratory generation of high-Mach-number magnetized collisionless shocks created through the interaction of an expanding laser-driven plasma with a magnetized ambient plasma. Time-resolved, two-dimensional imaging of plasma density and magnetic fields shows the formation and evolution of a supercritical shock propagating at magnetosonic Mach number Mms≈12 . Particle-in-cell simulations constrained by experimental data further detail the shock formation and separate dynamics of the multi-ion-species ambient plasma. The results show that the shocks form on time scales as fast as one gyroperiod, aided by the efficient coupling of energy, and the generation of a magnetic barrier between the piston and ambient ions. The development of this experimental platform complements present remote sensing and spacecraft observations, and opens the way for controlled laboratory investigations of high-Mach number collisionless shocks, including the mechanisms and efficiency of particle acceleration.

  20. Analysis of gas turbine engines using water and oxygen injection to achieve high Mach numbers and high thrust

    Science.gov (United States)

    Henneberry, Hugh M.; Snyder, Christopher A.

    1993-01-01

    An analysis of gas turbine engines using water and oxygen injection to enhance performance by increasing Mach number capability and by increasing thrust is described. The liquids are injected, either separately or together, into the subsonic diffuser ahead of the engine compressor. A turbojet engine and a mixed-flow turbofan engine (MFTF) are examined, and in pursuit of maximum thrust, both engines are fitted with afterburners. The results indicate that water injection alone can extend the performance envelope of both engine types by one and one-half Mach numbers at which point water-air ratios reach 17 or 18 percent and liquid specific impulse is reduced to some 390 to 470 seconds, a level about equal to the impulse of a high energy rocket engine. The envelope can be further extended, but only with increasing sacrifices in liquid specific impulse. Oxygen-airflow ratios as high as 15 percent were investigated for increasing thrust. Using 15 percent oxygen in combination with water injection at high supersonic Mach numbers resulted in thrust augmentation as high as 76 percent without any significant decrease in liquid specific impulse. The stoichiometric afterburner exit temperature increased with increasing oxygen flow, reaching 4822 deg R in the turbojet engine at a Mach number of 3.5. At the transonic Mach number of 0.95 where no water injection is needed, an oxygen-air ratio of 15 percent increased thrust by some 55 percent in both engines, along with a decrease in liquid specific impulse of 62 percent. Afterburner temperature was approximately 4700 deg R at this high thrust condition. Water and/or oxygen injection are simple and straightforward strategies to improve engine performance and they will add little to engine weight. However, if large Mach number and thrust increases are required, liquid flows become significant, so that operation at these conditions will necessarily be of short duration.

  1. Semi-implicit iterative methods for low Mach number turbulent reacting flows: Operator splitting versus approximate factorization

    Science.gov (United States)

    MacArt, Jonathan F.; Mueller, Michael E.

    2016-12-01

    Two formally second-order accurate, semi-implicit, iterative methods for the solution of scalar transport-reaction equations are developed for Direct Numerical Simulation (DNS) of low Mach number turbulent reacting flows. The first is a monolithic scheme based on a linearly implicit midpoint method utilizing an approximately factorized exact Jacobian of the transport and reaction operators. The second is an operator splitting scheme based on the Strang splitting approach. The accuracy properties of these schemes, as well as their stability, cost, and the effect of chemical mechanism size on relative performance, are assessed in two one-dimensional test configurations comprising an unsteady premixed flame and an unsteady nonpremixed ignition, which have substantially different Damköhler numbers and relative stiffness of transport to chemistry. All schemes demonstrate their formal order of accuracy in the fully-coupled convergence tests. Compared to a (non-)factorized scheme with a diagonal approximation to the chemical Jacobian, the monolithic, factorized scheme using the exact chemical Jacobian is shown to be both more stable and more economical. This is due to an improved convergence rate of the iterative procedure, and the difference between the two schemes in convergence rate grows as the time step increases. The stability properties of the Strang splitting scheme are demonstrated to outpace those of Lie splitting and monolithic schemes in simulations at high Damköhler number; however, in this regime, the monolithic scheme using the approximately factorized exact Jacobian is found to be the most economical at practical CFL numbers. The performance of the schemes is further evaluated in a simulation of a three-dimensional, spatially evolving, turbulent nonpremixed planar jet flame.

  2. Background-oriented schlieren imaging of flow around a circular cylinder at low Mach numbers

    Science.gov (United States)

    Stadler, Hannes; Bauknecht, André; Siegrist, Silvan; Flesch, Robert; Wolf, C. Christian; van Hinsberg, Nils; Jacobs, Markus

    2017-09-01

    The background-oriented schlieren (BOS) imaging method has, for the first time, been applied in the investigation of the flow around a circular cylinder at low Mach numbers (Mnumbers of 0.1× 10^6 ≤ Re ≤ 6.0× 10^6. Even at ambient pressure and the lowest Reynolds number investigated, density gradients associated with the flow around the cylinder were recorded. The signal-to-noise ratio of the evaluated gradient field improved with increasing stagnation pressure. The separation point could easily be identified with this non-intrusive measurement technique and corresponds well to simultaneous surface pressure measurements. The resulting displacement field is in principle of qualitative nature as the observation angle was parallel to the cylinder axis only in a single point of the recorded images. However, it has been possible to integrate the density field along the surface of the cylinder by successive imaging at incremental angular positions around the cylinder. This density distribution has been found to agree well with the pressure measurements and with potential theory where appropriate.

  3. Aerodynamic Characteristics of a Revised Target Drone Vehicle at Mach Numbers from 1.60 to 2.86

    Science.gov (United States)

    Blair, A. B., Jr.; Babb, C. Donald

    1968-01-01

    An investigation has been conducted in the Langley Unitary Plan wind tunnel to determine the aerodynamic characteristics of a revised target drone vehicle through a Mach number range from 1.60 to 2.86. The vehicle had canard surfaces and a swept clipped-delta wing with twin tip-mounted vertical tails.

  4. Experiments on the Flow Field and Acoustic Properties of a Mach number 0·75 Turbulent Air Jet at a Low Reynolds Number

    NARCIS (Netherlands)

    Slot, H.J.; Moore, P.; Delfos, R.; Boersma, B.J.

    2009-01-01

    In this paper we present the experimental results of a detailed investigation of the flow and acoustic properties of a turbulent jet with Mach number 0·75 and Reynolds number 3·5 103. We describe the methods and experimental procedures followed during the measurements, and subsequently present the f

  5. Convective heat transfer studies at high temperatures with pressure gradient for inlet flow Mach number of 0.45

    Science.gov (United States)

    Pedrosa, A. C. F.; Nagamatsu, H. T.; Hinckel, J. A.

    1984-01-01

    Heat transfer measurements were determined for a flat plate with and without pressure gradient for various free stream temperatures, wall temperature ratios, and Reynolds numbers for an inlet flow Mach number of 0.45, which is a representative inlet Mach number for gas turbine rotor blades. A shock tube generated the high temperature and pressure air flow, and a variable geometry test section was used to produce inlet flow Mach number of 0.45 and accelerate the flow over the plate to sonic velocity. Thin-film platinum heat gages recorded the local heat flux for laminar, transition, and turbulent boundary layers. The free stream temperatures varied from 611 R (339 K) to 3840 R (2133 K) for a T(w)/T(r,g) temperature ratio of 0.87 to 0.14. The Reynolds number over the heat gages varied from 3000 to 690,000. The experimental heat transfer data were correlated with laminar and turbulent boundary layer theories for the range of temperatures and Reynolds numbers and the transition phenomenon was examined.

  6. Experimental Investigation of a Hypersonic Glider Configuration at a Mach Number of 6 and at Full-Scale Reynolds Numbers

    Science.gov (United States)

    Seiff, Alvin; Wilkins, Max E.

    1961-01-01

    The aerodynamic characteristics of a hypersonic glider configuration, consisting of a slender ogive cylinder with three highly swept wings, spaced 120 apart, with the wing chord equal to the body length, were investigated experimentally at a Mach number of 6 and at Reynolds numbers from 6 to 16 million. The objectives were to evaluate the theoretical procedures which had been used to estimate the performance of the glider, and also to evaluate the characteristics of the glider itself. A principal question concerned the viscous drag at full-scale Reynolds number, there being a large difference between the total drags for laminar and turbulent boundary layers. It was found that the procedures which had been applied for estimating minimum drag, drag due to lift, lift curve slope, and center of pressure were generally accurate within 10 percent. An important exception was the non-linear contribution to the lift coefficient which had been represented by a Newtonian term. Experimentally, the lift curve was nearly linear within the angle-of-attack range up to 10 deg. This error affected the estimated lift-drag ratio. The minimum drag measurements indicated that substantial amounts of turbulent boundary layer were present on all models tested, over a range of surface roughness from 5 microinches maximum to 200 microinches maximum. In fact, the minimum drag coefficients were nearly independent of the surface smoothness and fell between the estimated values for turbulent and laminar boundary layers, but closer to the turbulent value. At the highest test Reynolds numbers and at large angles of attack, there was some indication that the skin friction of the rough models was being increased by the surface roughness. At full-scale Reynolds number, the maximum lift-drag ratio with a leading edge of practical diameter (from the standpoint of leading-edge heating) was 4.0. The configuration was statically and dynamically stable in pitch and yaw, and the center of pressure was less

  7. A comparative study of scramjet injection strategies for high Mach numbers flows

    Science.gov (United States)

    Riggins, D. W.; Mcclinton, C. R.; Rogers, R. C.; Bittner, R. D.

    1992-01-01

    A simple method for predicting the axial distribution of supersonic combustor thrust potential is described. A complementary technique for illustrating the spatial evolution and distribution of thrust potential and loss mechanisms in reacting flows is developed. Wall jet cases and swept ramp injector cases for Mach 17 and Mach 13.5 flight enthalpy inflow conditions are numerically modeled and analyzed using these techniques. The visualization of thrust potential in the combustor for the various cases examined provides a unique tool for increasing understanding of supersonic combustor performance potential.

  8. Generation and Evolution of High-Mach Number, Laser-Driven Magnetized Collisionless Shocks in the Laboratory

    CERN Document Server

    Schaeffer, Derek; Haberberger, Dan; Fiksel, Gennady; Bhattacharjee, Amitava; Barnak, Daniel; Hu, Suxing; Germaschewski, Kai

    2016-01-01

    Shocks act to convert incoming supersonic flows to heat, and in collisionless plasmas the shock layer forms on kinetic plasma scales through collective electromagnetic effects. These collisionless shocks have been observed in many space and astrophysical systems [Smith 1975, Smith 1980, Burlaga 2008, Sulaiman 2015], and are believed to accelerate particles, including cosmic rays, to extremely high energies [Kazanas 1986, Loeb 2000, Bamba 2003, Masters 2013, Ackermann 2013]. Of particular importance are the class of high-Mach number, supercritical shocks [Balogh 2013] ($M_A\\gtrsim4$), which must reflect significant numbers of particles back into the upstream to accommodate entropy production, and in doing so seed proposed particle acceleration mechanisms [Blandford 1978, McClements 2001, Caprioli 2014, Matsumoto 2015]. Here we present the first laboratory generation of high-Mach number magnetized collisionless shocks created through the interaction of an expanding laser-driven plasma with a magnetized ambient ...

  9. Non-thermal Electron Acceleration in Low Mach Number Collisionless Shocks. I. Particle Energy Spectra and Acceleration Mechanism

    Science.gov (United States)

    Guo, Xinyi; Sironi, Lorenzo; Narayan, Ramesh

    2014-10-01

    Electron acceleration to non-thermal energies in low Mach number (Ms Diffusive shock acceleration, also known as first-order Fermi acceleration, cannot be directly invoked to explain the acceleration of electrons. Rather, an additional mechanism is required to pre-accelerate the electrons from thermal to supra-thermal energies, so they can then participate in the Fermi process. In this work, we use two- and three-dimensional particle-in-cell plasma simulations to study electron acceleration in low Mach number shocks. We focus on the particle energy spectra and the acceleration mechanism in a reference run with Ms = 3 and a quasi-perpendicular pre-shock magnetic field. We find that about 15% of the electrons can be efficiently accelerated, forming a non-thermal power-law tail in the energy spectrum with a slope of p ~= 2.4. Initially, thermal electrons are energized at the shock front via shock drift acceleration (SDA). The accelerated electrons are then reflected back upstream where their interaction with the incoming flow generates magnetic waves. In turn, the waves scatter the electrons propagating upstream back toward the shock for further energization via SDA. In summary, the self-generated waves allow for repeated cycles of SDA, similarly to a sustained Fermi-like process. This mechanism offers a natural solution to the conflict between the bright radio synchrotron emission observed from the outskirts of galaxy clusters and the low electron acceleration efficiency usually expected in low Mach number shocks.

  10. Measurement and Analysis of the Noise Radiated by Low Mach Number Centrifugal Blowers.

    Science.gov (United States)

    Yeager, David Marvin

    An investigation was performed of the broad band, aerodynamically generated noise in low tip-speed Mach number, centrifugal air moving devices. An interdisciplinary experimental approach was taken which involved investigation of the aerodynamic and acoustic fields, and their mutual relationship. The noise generation process was studied using two experimental vehicles: (1) a scale model of a homologous family of centrifugal blowers typical of those used to cool computer and business equipment, and (2) a single blade from a centrifugal blower impeller placed in a known, controllable flow field. The radiation characteristics of the model blower were investigated by measuring the acoustic intensity distribution near the blower inlet and comparing it with the intensity near the inlet to an axial flow fan. Results showed that the centrifugal blower is a distributed, random noise source, unlike an axial fan which exhibited the effects of a coherent, interacting source distribution. Aerodynamic studies of the flow field in the inlet and at the discharge to the rotating impeller were used to assess the mean flow distribution through the impeller blade channels and to identify regions of excessive turbulence near the rotating blade row. Both circumferential and spanwise mean flow nonuniformities were identified along with a region of increased turbulence just downstream of the scroll cutoff. The fluid incidence angle, normally taken as an indicator of blower performance, was estimated from mean flow data as deviating considerably from an ideal impeller design. An investigation of the noise radiated from the single, isolated airfoil was performed using modern correlation and spectral analysis techniques. Radiation from the single blade in flow was characterized using newly developed expressions for the correlation area and the dipole source strength per unit area, and from the relationship between the blade surface pressure and the incident turbulent flow field. Results

  11. Results obtained during accelerated transonic tests of the Bell XS-1 airplane in flights to a Mach number of 0.92

    Science.gov (United States)

    Drake, Hubert M; Mclaughlin, Milton D; Goodman, Harold R

    1948-01-01

    Results are presented of tests up to a Mach number of 0.92 at altitudes around 30,000 feet. The data obtained show that the airplane can be flown to this Mach number above 30,000 feet. Longitudinal trim changes have been experienced but the forces involved have been small. The elevator effectiveness decreased about one-half with increase of Mach number from 0.70 to 0.87. Buffeting has been experienced in level flight but it has been mild and the associated tail loads have been small. No aileron buzz or other flutter phenomena have been noted.

  12. Flight and wind-tunnel measurements showing base drag reduction provided by a trailing disk for high Reynolds number turbulent flow for subsonic and transonic Mach numbers

    Science.gov (United States)

    Powers, Sheryll Goecke; Huffman, Jarrett K.; Fox, Charles H., Jr.

    1986-01-01

    The effectiveness of a trailing disk, or trapped vortex concept, in reducing the base drag of a large body of revolution was studied from measurements made both in flight and in a wind tunnel. Pressure data obtained for the flight experiment, and both pressure and force balance data were obtained for the wind tunnel experiment. The flight test also included data obtained from a hemispherical base. The experiment demonstrated the significant base drag reduction capability of the trailing disk to Mach 0.93 and to Reynolds numbers up to 80 times greater than for earlier studies. For the trailing disk data from the flight experiment, the maximum decrease in base drag ranged form 0.08 to 0.07 as Mach number increased from 0.70 to 0.93. Aircraft angles of attack ranged from 3.9 to 6.6 deg for the flight data. For the trailing disk data from the wind tunnel experiment, the maximum decrease in base and total drag ranged from 0.08 to 0.05 for the approximately 0 deg angle of attack data as Mach number increased from 0.30 to 0.82.

  13. Spreading of Exhaust Jet from 16 Inch Ream Jet at Mach Number 2.0 / Fred Wilcox, Donald Pennington

    Science.gov (United States)

    Wilcox, Fred; Pennington, Donald

    1952-01-01

    An investigation of the jet-spreading characteristics of a 16 inch ram-jet engine was conducted in the 8 by 6 foot supersonic tunnel at a Mach number of 2.0; both a converging nozzle having a contraction ratio of 0.71 and a cylindrical extension to the combustion chamber were used. The jet boundaries determined by means of pitot pressure surveys were compared with boundaries calculated from one-dimensional continuity and momentum relations. For the cylindrical nozzle, the jet reaches its maximum diameter, 4 percent greater than calculated, about 0.6 nozzle-exit diameter downstream of the nozzle exit. The maximum diameter for the converging nozzle was 7 percent greater than calculated from one dimensional relations and occurred from 1 to 1.5 nozzle-exit diameters downstream of the exit. Non dimensional maximum jet diameters agreed closely with results of an investigation by Rousso and Baughman; these data were obtained with low-temperature jets exhausting into a stream at a Mach number of 1.91 from nozzles having exit diameters of 0.75 inch.

  14. Non-Thermal Electron Acceleration in Low Mach Number Collisionless Shocks. I. Particle Energy Spectra and Acceleration Mechanism

    CERN Document Server

    Guo, Xinyi; Narayan, Ramesh

    2014-01-01

    Electron acceleration to non-thermal energies in low Mach number (M<5) shocks is revealed by radio and X-ray observations of galaxy clusters and solar flares, but the electron acceleration mechanism remains poorly understood. Diffusive shock acceleration, also known as first-order Fermi acceleration, cannot be directly invoked to explain the acceleration of electrons. Rather, an additional mechanism is required to pre-accelerate the electrons from thermal to supra-thermal energies, so they can then participate in the Fermi process. In this work, we use two- and three-dimensional particle-in-cell plasma simulations to study electron acceleration in low Mach number shocks. We focus on the particle energy spectra and the acceleration mechanism in a reference run with M=3. We find that about 15 percent of the electrons can be efficiently accelerated, forming a non-thermal power-law tail in the energy spectrum with a slope of p~2.4. Initially, thermal electrons are energized at the shock front via shock drift a...

  15. Performance characteristics of two multiaxis thrust-vectoring nozzles at Mach numbers up to 1.28

    Science.gov (United States)

    Wing, David J.; Capone, Francis J.

    1993-01-01

    The thrust-vectoring axisymmetric (VA) nozzle and a spherical convergent flap (SCF) thrust-vectoring nozzle were tested along with a baseline nonvectoring axisymmetric (NVA) nozzle in the Langley 16-Foot Transonic Tunnel at Mach numbers from 0 to 1.28 and nozzle pressure ratios from 1 to 8. Test parameters included geometric yaw vector angle and unvectored divergent flap length. No pitch vectoring was studied. Nozzle drag, thrust minus drag, yaw thrust vector angle, discharge coefficient, and static thrust performance were measured and analyzed, as well as external static pressure distributions. The NVA nozzle and the VA nozzle displayed higher static thrust performance than the SCF nozzle throughout the nozzle pressure ratio (NPR) range tested. The NVA nozzle had higher overall thrust minus drag than the other nozzles throughout the NPR and Mach number ranges tested. The SCF nozzle had the lowest jet-on nozzle drag of the three nozzles throughout the test conditions. The SCF nozzle provided yaw thrust angles that were equal to the geometric angle and constant with NPR. The VA nozzle achieved yaw thrust vector angles that were significantly higher than the geometric angle but not constant with NPR. Nozzle drag generally increased with increases in thrust vectoring for all the nozzles tested.

  16. Aerodynamic Performance and Static Stability and Control of Flat-Top Hypersonic Gliders at Mach Numbers from 0.6 to 18

    Science.gov (United States)

    Syvertson, Clarence A; Gloria, Hermilo R; Sarabia, Michael F

    1958-01-01

    A study is made of aerodynamic performance and static stability and control at hypersonic speeds. In a first part of the study, the effect of interference lift is investigated by tests of asymmetric models having conical fuselages and arrow plan-form wings. The fuselage of the asymmetric model is located entirely beneath the wing and has a semicircular cross section. The fuselage of the symmetric model was centrally located and has a circular cross section. Results are obtained for Mach numbers from 3 to 12 in part by application of the hypersonic similarity rule. These results show a maximum effect of interference on lift-drag ratio occurring at Mach number of 5, the Mach number at which the asymmetric model was designed to exploit favorable lift interference. At this Mach number, the asymmetric model is indicated to have a lift-drag ratio 11 percent higher than the symmetric model and 15 percent higher than the asymmetric model when inverted. These differences decrease to a few percent at a Mach number of 12. In the course of this part of the study, the accuracy to the hypersonic similarity rule applied to wing-body combinations is demonstrated with experimental results. These results indicate that the rule may prove useful for determining the aerodynamic characteristics of slender configurations at Mach numbers higher than those for which test equipment is really available. In a second part of the study, the aerodynamic performance and static stability and control characteristics of a hypersonic glider are investigated in somewhat greater detail. Results for Mach numbers from 3 to 18 for performance and 0.6 to 12 for stability and control are obtained by standard text techniques, by application of the hypersonic stability rule, and/or by use of helium as a test medium. Lift-drag ratios of about 5 for Mach numbers up to 18 are shown to be obtainable. The glider studied is shown to have acceptable longitudinal and directional stability characteristics through the

  17. A Reynolds Number Study of Wing Leading-Edge Effects on a Supersonic Transport Model at Mach 0.3

    Science.gov (United States)

    Williams, M. Susan; Owens, Lewis R., Jr.; Chu, Julio

    1999-01-01

    A representative supersonic transport design was tested in the National Transonic Facility (NTF) in its original configuration with small-radius leading-edge flaps and also with modified large-radius inboard leading-edge flaps. Aerodynamic data were obtained over a range of Reynolds numbers at a Mach number of 0.3 and angles of attack up to 16 deg. Increasing the radius of the inboard leading-edge flap delayed nose-up pitching moment to a higher lift coefficient. Deflecting the large-radius leading-edge flap produced an overall decrease in lift coefficient and delayed nose-up pitching moment to even higher angles of attack as compared with the undeflected large- radius leading-edge flap. At angles of attack corresponding to the maximum untrimmed lift-to-drag ratio, lift and drag coefficients decreased while lift-to-drag ratio increased with increasing Reynolds number. At an angle of attack of 13.5 deg., the pitching-moment coefficient was nearly constant with increasing Reynolds number for both the small-radius leading-edge flap and the deflected large-radius leading-edge flap. However, the pitching moment coefficient increased with increasing Reynolds number for the undeflected large-radius leading-edge flap above a chord Reynolds number of about 35 x 10 (exp 6).

  18. A uniquely defined entropy stable matrix dissipation operator for high Mach number ideal MHD and compressible Euler simulations

    Science.gov (United States)

    Winters, Andrew R.; Derigs, Dominik; Gassner, Gregor J.; Walch, Stefanie

    2017-03-01

    We describe a unique averaging procedure to design an entropy stable dissipation operator for the ideal magnetohydrodynamic (MHD) and compressible Euler equations. Often in the derivation of an entropy conservative numerical flux function much care is taken in the design and averaging of the entropy conservative numerical flux. We demonstrate in this work that if the discrete dissipation operator is not carefully chosen as well it can have deleterious effects on the numerical approximation. This is particularly true for very strong shocks or high Mach number flows present, for example, in astrophysical simulations. We present the underlying technique of how to construct a unique averaging technique for the discrete dissipation operator. We also demonstrate numerically the increased robustness of the approximation.

  19. Numerical Investigation on Hydrogen-Fueled Scramjet Combustor with Parallel Strut Fuel Injector at a Flight Mach Number of 6

    Directory of Open Access Journals (Sweden)

    Krishna Pandey

    2016-01-01

    Full Text Available A numerical analysis of the inlet-combustor interaction and flow structure through a scramjet engine at a flight Mach number M = 6 with parallel injection (Strut with circular inlet is presented in the present research article. Three different angles of attack (α=-4°, α=0°, α=4° have been studied for parallel injection. The scramjet configuration used here is a modified version of DLR scramjet model. Fuel is injected at supersonic speed (M=2 through a parallel strut injector. For parallel injection, the shape of the strut is chosen in a way to produce strong stream wise vorticity and thus to enhance the hydrogen/air mixing inside the combustor. These numerical simulations are aimed to study the flow structure, supersonic mixing, and combustion phenomena for the three different types of geometries along with circular shaped strut configuration.

  20. The influence of the Mach number of shock waves on turbulent mixing growth at an interface of gases

    Science.gov (United States)

    Nevmerzhitsky, N. V.; Sotskov, E. A.; Sen'kovsky, E. D.; Razin, A. N.; Ustinenko, V. A.; Krivonos, O. L.; Tochilina, L. V.

    2010-12-01

    The results of our experimental investigation of the turbulent mixing occurring at a Richtmayer-Meshkov instability driven by a shock wave (SW) in gases at different Mach numbers (M) ranging from ≈1.4 to ≈9 are presented in this paper. The experiments were performed by using an air shock tube with a channel section of 40×40 mm2. The SW passed from 'light' to 'heavy' gases. Air (helium) was used as a 'light' gas and Xe, CO2 and Ar were used as 'heavy' gases. The gases were initially separated by a thin (≈1 μm) polymer film, which was failed after the passing of the SW. A film of the flow was made using a high-speed camera by the Schlieren method.

  1. Design features of a low-disturbance supersonic wind tunnel for transition research at low supersonic Mach numbers

    Science.gov (United States)

    Wolf, Stephen W. D.; Laub, James A.; King, Lyndell S.; Reda, Daniel C.

    1992-01-01

    A unique, low-disturbance supersonic wind tunnel is being developed at NASA-Ames to support supersonic laminar flow control research at cruise Mach numbers of the High Speed Civil Transport (HSCT). The distinctive design features of this new quiet tunnel are a low-disturbance settling chamber, laminar boundary layers along the nozzle/test section walls, and steady supersonic diffuser flow. This paper discusses these important aspects of our quiet tunnel design and the studies necessary to support this design. Experimental results from an 1/8th-scale pilot supersonic wind tunnel are presented and discussed in association with theoretical predictions. Natural laminar flow on the test section walls is demonstrated and both settling chamber and supersonic diffuser performance is examined. The full-scale wind tunnel should be commissioned by the end of 1993.

  2. Effect of initial conditions and Mach number on the Richtmyer-Meshkov instability in ICF like conditions

    Science.gov (United States)

    Rao, Pooja; She, Dan; Lim, Hyunkyung; Glimm, James

    2015-11-01

    The qualitative and quantitative effect of initial conditions (linear and non-linear) and high Mach number (1.3 and 1.45) is studied on the turbulent mixing induced by the Richtmyer-Meshkov instability in idealized ICF conditions. The Richtmyer-Meshkov instability seeds Rayleigh-taylor instabilities in ICF experiments and is one of the factors that contributes to reduced performance of ICF experiments. Its also found in collapsing cores of stars and supersonic combustion. We use the Stony Brook University code, FronTier, which is verified via a code comparison study against the AMR multiphysics code FLASH, and validated against vertical shock tube experiments done by the LANL Extreme Fluids Team. These simulations are designed as a step towards simulating more realistic ICF conditions and quantifying the detrimental effects of mixing on the yield.

  3. Extension of Finite Volume Compressible Flow Solvers to Multi-dimensional, Variable Density Zero Mach Number Flows

    Science.gov (United States)

    Schneider, T.; Botta, N.; Geratz, K. J.; Klein, R.

    1999-11-01

    When attempting to compute unsteady, variable density flows at very small or zero Mach number using a standard finite volume compressible flow solver one faces at least the following difficulties: (i) Spatial pressure variations vanish as the Mach number M→0, but they do affect the velocity field at leading order; (ii) the resulting spatial homogeneity of the leading order pressure implies an elliptic divergence constraint for the energy flux; (iii) violations of this constraint crucially affect the transport of mass, preventing a code to properly advect even a constant density distribution. We overcome these difficulties through a new algorithm for constructing numerical fluxes in the context of multi-dimensional finite volume methods in conservation form. The construction of numerical fluxes involves: (1) An explicit upwind step yielding predictions for the nonlinear convective flux components. (2) A first correction step that introduces pressure gradients which guarantee compliance of the convective fluxes with a divergence constraint. This step requires the solution of a first Poisson-type equation. (3) A second projection step which provides the yet unknown (non-convective) pressure contribution to the total flux of momentum. This second projection requires the solution of another Poisson-type equation and yields the cell centered velocity field at the new time. This velocity field exactly satisfies a divergence constraint consistent with the asymptotic limit. Step (1) can be done by any standard finite volume compressible flow solver. The input to steps (2) and (3) involves solely the fluxes from step (1) and is independent of how these were obtained. Thus, our approach allows any such solver to be extended to compute variable density incompressible flows.

  4. Direct numerical simulation of K-type and H-type transitions to turbulence in a low Mach number flat plate boundary layer

    Science.gov (United States)

    Sayadi, Taraneh; Hamman, Curtis; Moin, Parviz

    2011-11-01

    Transition to turbulence via spatially evolving secondary instabilities in compressible, zero-pressure-gradient flat plate boundary layers is numerically simulated for both the Klebanoff K-type and Herbert H-type disturbances. The objective of this work is to evaluate the universality of the breakdown process between different routes through transition in wall-bounded shear flows. Each localized linear disturbance is amplified through weak non-linear instability that grows into lambda-vortices and then hairpin-shaped eddies with harmonic wavelength, which become less organized in the late-transitional regime once a fully populated spanwise turbulent energy spectrum is established. For the H-type transition, the computational domain extends from Rex =105 , where laminar blowing and suction excites the most unstable fundamental and a pair of oblique waves, to fully turbulent stage at Rex = 10 . 6 ×105 . The computational domain for the K-type transition extends to Rex = 9 . 6 ×105 . The computational algorithm employs fourth-order central differences with non-reflective numerical sponges along the external boundaries. For each case, the Mach number is 0.2. Supported by the PSAAP program of DoE, ANL and LLNL.

  5. Effect of inlet-air humidity, temperature, pressure, and reference Mach number on the formation of oxides of nitrogen in a gas turbine combustor

    Science.gov (United States)

    Marchionna, N. R.; Diehl, L. A.; Trout, A. M.

    1973-01-01

    Tests were conducted to determine the effect of inlet air humidity on the formation of oxides of nitrogen (NOx) from a gas turbine combustor. Combustor inlet air temperature ranged from 506 K (450 F) to 838 K (1050 F). The tests were primarily run at a constant pressure of 6 atmospheres and reference Mach number of 0.065. The NOx emission index was found to decrease with increasing inlet air humidity at a constant exponential rate: NOx = NOx0e-19H (where H is the humidity and the subscript 0 denotes the value at zero humidity). the emission index increased exponentially with increasing normalized inlet air temperature to the 1.14 power. Additional tests made to determine the effect of pressure and reference Mach number on NOx showed that the NOx emission index varies directly with pressure to the 0.5 power and inversely with reference Mach number.

  6. Parametric Study of Afterbody/nozzle Drag on Twin Two-dimensional Convergent-divergent Nozzles at Mach Numbers from 0.60 to 1.20

    Science.gov (United States)

    Pendergraft, Odis C., Jr.; Burley, James R., II; Bare, E. Ann

    1986-01-01

    An investigation has been conducted in the Langley 16-Foot Transonic Tunnel to determine the effects of upper and lower external nozzle flap geometry on the external afterbody/nozzle drag of nonaxisymmetric two-dimensional convergent-divergent exhaust nozzles having parallel external sidewalls installed on a generic twin-engine, fighter-aircraft model. Tests were conducted over a Mach number range from 0.60 to 1.20 and over an angle-of-attack range from -5 to 9 deg. Nozzle pressure ratio was varied from jet off (1.0) to approximately 10.0, depending on Mach number.

  7. Practical computational aeroacoustics for compact surfaces in low mach number flows

    DEFF Research Database (Denmark)

    Pradera-Mallabiabarrena, Ainara; Keith, Graeme; Jacobsen, Finn

    2011-01-01

    compared to the wavelength of interest. This makes it possible to focus on the surface source term of the Ffowcs Williams-Hawkings equation. In this paper, in order to illustrate the basic method for storing and utilizing data from the CFD analysis, the flow past a circular cylinder at a Reynolds number...

  8. Effects of leading edge sweep angle and design lift coefficient on performance of a modified arrow wing at a design Mach number of 2.6

    Science.gov (United States)

    Mack, R. J.

    1974-01-01

    Wing models were tested in the high-speed section of the Langley Unitary Plan wind tunnel to study the effects of the leading-edge sweep angle and the design lift coefficient on aerodynamic performance and efficiency. The models had leading-edge sweep angles of 69.44 deg, 72.65 deg, and 75.96 deg which correspond to values of the design Mach-number-sweep-angle parameter (beta cotangent A) sub DES of 0.6, 0.75, and 0.9, respectively. For each sweep angle, camber surfaces having design lift coefficients of 0,0.08, and 0.12 at a design Mach number of 2.6 were generated. The wind-tunnel tests were conducted at Mach numbers of 2.3, 2.6, and 2.96 with a stagnation temperature of 338.7 K (150 F) and a Reynolds number per meter of 9.843 times 10 to the 6th power. The results of the tests showed that only a moderate sweeping of the wing leading edge aft of the Mach line along with a small-to-moderate amount of camber and twist was needed to significantly improve the zero-lift (flat camber surface) wing performance and efficiency.

  9. Effect of variation of length-to-depth ratio and Mach number on the performance of a typical double cavity scramjet combustor

    Science.gov (United States)

    Mahto, Navin Kumar; Choubey, Gautam; Suneetha, Lakka; Pandey, K. M.

    2016-11-01

    The two equation standard k-ɛ turbulence model and the two-dimensional compressible Reynolds-Averaged Navier-Stokes (RANS) equations have been used to computationally simulate the double cavity scramjet combustor. Here all the simulations are performed by using ANSYS 14-FLUENT code. At the same time, the validation of the present numerical simulation for double cavity has been performed by comparing its result with the available experimental data which is in accordance with the literature. The results are in good agreement with the schlieren image and the pressure distribution curve obtained experimentally. However, the pressure distribution curve obtained numerically is under-predicted in 5 locations by numerical calculation. Further, investigations on the variations of the effects of the length-to-depth ratio of cavity and Mach number on the combustion characteristics has been carried out. The present results show that there is an optimal length-to-depth ratio for the cavity for which the performance of combustor significantly improves and also efficient combustion takes place within the combustor region. Also, the shifting of the location of incident oblique shock took place in the downstream of the H2 inlet when the Mach number value increases. But after achieving a critical Mach number range of 2-2.5, the further increase in Mach number results in lower combustion efficiency which may deteriorate the performance of combustor.

  10. Interstellar neutral helium in the heliosphere from IBEX observations. IV. Flow vector, Mach number, and abundance of the Warm Breeze

    CERN Document Server

    Kubiak, M A; Bzowski, M; Sokol, J M; Fuselier, S A; Galli, A; Heirtzler, D; Kucharek, H; Leonard, T W; Moebius, D J McComas E; Park, J; Schwadron, N A; Wurz, P

    2016-01-01

    With the velocity vector and temperature of the pristine interstellar neutral (ISN) He recently obtained with high precision from a coordinated analysis summarized by McComas et al.2015b, we analyzed the IBEX observations of neutral He left out from this analysis. These observations were collected during the ISN observation seasons 2010---2014 and cover the region in the Earth's orbit where the Warm Breeze persists. We used the same simulation model and a very similar parameter fitting method to that used for the analysis of ISN He. We approximated the parent population of the Warm Breeze in front of the heliosphere with a homogeneous Maxwell-Boltzmann distribution function and found a temperature of $\\sim 9\\,500$ K, an inflow speed of 11.3 km s$^{-1}$, and an inflow longitude and latitude in the J2000 ecliptic coordinates $251.6^\\circ$, $12.0^\\circ$. The abundance of the Warm Breeze relative to the interstellar neutral He is 5.7\\% and the Mach number is 1.97. The newly found inflow direction of the Warm Bree...

  11. The Alfven Mach Number Control of the Solar Wind-Magnetosphere Coupling Efficiency and the Saturation of the Geomagnetic Indices

    Science.gov (United States)

    Myllys, M. E.; Kilpua, E.; Lavraud, B.

    2015-12-01

    We have investigated the effect of key solar wind driving parameters on the solar wind-magnetosphere coupling efficiency and saturation of the cross polar cap potential (CPCP) during sheath and magnetic cloud driven storms. The particular focus of the study was on the coupling efficiency dependence with Alfven Mach number (MA).Since we are studying the instantaneous coupling efficiency instead of the average efficiency over the whole solar wind structure, we needed to take into account the communication time between the solar wind and the magnetosphere. We present the results of the time delay analysis between geomagnetic indices (PCN, AE and SYM-H) and the interplanetary electric field y-component (EY, GSM coordinate system) and Newell and Borovsky functions. The study shows that the MA has a clear effect to the saturation of the PCN index, which can be used as a proxy of the polar cap potential. The higher the MA the higher the limit EY value after which the saturation starts to occur. Thus, the coupling efficiency increases as a function of MA. Also, the AE index saturates during high solar wind driving but the saturation is not MA depended. However, the results also suggest that the MA it is not the primary cause for the PCN saturation.

  12. Concurrent identification of aero-acoustic scattering and noise sources at a flow duct singularity in low Mach number flow

    Science.gov (United States)

    Sovardi, Carlo; Jaensch, Stefan; Polifke, Wolfgang

    2016-09-01

    A numerical method to concurrently characterize both aeroacoustic scattering and noise sources at a duct singularity is presented. This approach combines Large Eddy Simulation (LES) with techniques of System Identification (SI): In a first step, a highly resolved LES with external broadband acoustic excitation is carried out. Subsequently, time series data extracted from the LES are post-processed by means of SI to model both acoustic propagation and noise generation. The present work studies the aero-acoustic characteristics of an orifice placed in a duct at low flow Mach numbers with the "LES-SI" method. Parametric SI based on the Box-Jenkins mathematical structure is employed, with a prediction error approach that utilizes correlation analysis of the output residuals to avoid overfitting. Uncertainties of model parameters due to the finite length of times series are quantified in terms of confidence intervals. Numerical results for acoustic scattering matrices and power spectral densities of broad-band noise are validated against experimental measurements over a wide range of frequencies below the cut-off frequency of the duct.

  13. Winding number instability in the phase-turbulence regime of the complex Ginzburg-Landau equation

    CERN Document Server

    Montagne, R; San Miguel, M

    1996-01-01

    We give a statistical characterization of states with nonzero winding number in the Phase Turbulence (PT) regime of the one-dimensional Complex Ginzburg-Landau equation. We find that states with winding number larger than a critical one are unstable, in the sense that they decay to states with smaller winding number. The transition from Phase to Defect Turbulence is interpreted as an ergodicity breaking transition which occurs when the range of stable winding numbers vanishes. Asymptotically stable states which are not spatio-temporally chaotic are described within the PT regime of nonzero winding number.

  14. Heat transfer investigation of two Langley Research Center delta wing configurations at a Mach number of 10.5, volume 1

    Science.gov (United States)

    Eaves, R. H.; Buchanan, T. D.; Warmbrod, J. D.; Johnson, C. B.

    1972-01-01

    Heat transfer tests for two delta wing configurations were conducted in the hypervelocity wind tunnel. The 24-inch long models were tested at a Mach number of approximately 10.5 and at angles of attack of 20, 40, and 60 degrees over a length Reynolds number range from 5 million to 23 million on 4 May to 4 June 1971. Heat transfer results were obtained from model surface heat gage measurements and thermographic phosphor paint.

  15. Contribution from the Earth's Bow Shock to Region 1 Current under Low Alfvén Mach Numbers

    Institute of Scientific and Technical Information of China (English)

    PENG Zhong; HU You-Qiu

    2009-01-01

    @@ Using global MHD simulations of the solar wind-magnetosphere--ionosphere system, we investigate the depen-dence of the contribution from the Earth's bow shock (I1bs) to ionospheric region I field aligned current (FAC) (I1). It is found that I1bs increases with increasing southward interplanetary magnetic field (IMF) strength Bs, if the Alfven Mach number MA of the solar wind exceeds 2, a similar result as obtained by previous authors. However, if MA becomes close to or falls below 2, I1bs will decrease with B8 in both magnitude and percentage (i.e., I1bs/I1) because of the resultant reduction of the bow shock strength. Both the surface current density Jbs at the nose of the bow shock and the total bow shock current lb, share nearly the same relationship with MA, and vary non-monotonically with MA or Bs. The maximum point is found to be located at MA = 2.7. Three conclusions are then made as follows: (1) The surface current density at the nose, which is much easier to be evaluated, may be used to largely describe the behaviour of the bow shock instead of the total bow shock current. (2) The peak of the total bow shock current is reached at about MA = 2.7 when only Bs is adjusted. (3) The non-monotonic variation of the bow shock current with MA causes a similar variation of its contribution to region 1 FAC. The turning point for such contribution is found to be nearly MA= 2. The implication of these conclusions to the saturation of the ionospheric transpolar potential is briefly discussed.

  16. An improved high-order scheme for DNS of low Mach number turbulent reacting flows based on stiff chemistry solver

    Science.gov (United States)

    Yu, Rixin; Yu, Jiangfei; Bai, Xue-Song

    2012-06-01

    We present an improved numerical scheme for numerical simulations of low Mach number turbulent reacting flows with detailed chemistry and transport. The method is based on a semi-implicit operator-splitting scheme with a stiff solver for integration of the chemical kinetic rates, developed by Knio et al. [O.M. Knio, H.N. Najm, P.S. Wyckoff, A semi-implicit numerical scheme for reacting flow II. Stiff, operator-split formulation, Journal of Computational Physics 154 (2) (1999) 428-467]. Using the material derivative form of continuity equation, we enhance the scheme to allow for large density ratio in the flow field. The scheme is developed for direct numerical simulation of turbulent reacting flow by employing high-order discretization for the spatial terms. The accuracy of the scheme in space and time is verified by examining the grid/time-step dependency on one-dimensional benchmark cases: a freely propagating premixed flame in an open environment and in an enclosure related to spark-ignition engines. The scheme is then examined in simulations of a two-dimensional laminar flame/vortex-pair interaction. Furthermore, we apply the scheme to direct numerical simulation of a homogeneous charge compression ignition (HCCI) process in an enclosure studied previously in the literature. Satisfactory agreement is found in terms of the overall ignition behavior, local reaction zone structures and statistical quantities. Finally, the scheme is used to study the development of intrinsic flame instabilities in a lean H2/air premixed flame, where it is shown that the spatial and temporary accuracies of numerical schemes can have great impact on the prediction of the sensitive nonlinear evolution process of flame instability.

  17. Numerical Modeling of Flow Control in a Boundary-Layer-Ingesting Offset Inlet Diffuser at Transonic Mach Numbers

    Science.gov (United States)

    Allan Brian G.; Owens, Lewis, R.

    2006-01-01

    This paper will investigate the validation of a NASA developed, Reynolds-averaged Navier-Stokes (RANS) flow solver, OVERFLOW, for a boundary-layer-ingesting (BLI) offset (S-shaped) inlet in transonic flow with passive and active flow control devices as well as the baseline case. Numerical simulations are compared to wind tunnel results of a BLI inlet conducted at the NASA Langley 0.3-Meter Transonic Cryogenic Tunnel. Comparisons of inlet flow distortion, pressure recovery, and inlet wall pressures are performed. The numerical simulations are compared to the BLI inlet data at a freestream Mach number of 0.85 and a Reynolds number of approximately 2 million based on the length of the fan-face diameter. The numerical simulations with and without wind tunnel walls are performed, quantifying effects of the tunnel walls on the BLI inlet flow measurements. The wind tunnel test evaluated several different combinations of jet locations and mass flow rates as well as a vortex generator (VG) vane case. The numerical simulations will be performed on a single jet configuration for varying actuator mass flow rates at a fix inlet mass flow condition. Validation of the numerical simulations for the VG vane case will also be performed for varying inlet mass flow rates. Overall, the numerical simulations were able to predict the baseline circumferential flow distortion, DPCPavg, very well for comparisons made within the designed operating range of the BLI inlet. However the CFD simulations did predict a total pressure recovery that was 0.01 lower than the experiment. Numerical simulations of the baseline inlet flow also showed good agreement with the experimental inlet centerline surface pressures. The vane case showed that the CFD predicted the correct trends in the circumferential distortion for varying inlet mass flow but had a distortion level that was nearly twice as large as the experiment. Comparison to circumferential distortion measurements for a 15 deg clocked 40 probe

  18. Influences of attack angle and mach number on aerodynamic characters of typical sections of extra-long blade in a steam turbine

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    On super-sonic or trans-sonic planar cascade wind tunnel of free jet intermittent type, wind blowing experiments were performed on the typical sections of stator and rotor blades in the last stage of ultra-ultra-critical steam turbine with extra-long blade of 1200mm. The influences of attack angle and Mach number on the aerodynamic performances of these sections of the blade profiles were verified, and their operating ranges were also specified.

  19. The effects of winglets on low aspect ratio wings at supersonic Mach numbers. M.S. Thesis Report Feb. 1989 - Apr. 1991

    Science.gov (United States)

    Keenan, James A.; Kuhlman, John M.

    1991-01-01

    A computational study was conducted on two wings, of aspect ratios 1.244 and 1.865, each having 65 degree leading edge sweep angles, to determine the effects of nonplanar winglets at supersonic Mach numbers. A Mach number of 1.62 was selected as the design value. The winglets studied were parametrically varied in alignment, length, sweep, camber, thickness, and dihedral angle to determine which geometry had the best predicted performance. For the computational analysis, an available Euler marching technique was used. The results indicated that the possibility existed for wing-winglet geometries to equal the performance of wing-alone bodies in supersonic flows with both bodies having the same semispan. The first wing with winglet used NACA 1402 airfoils for the base wing and was shown to have lift-to-pressure drag ratios within 0.136 percent to 0.360 percent of the NACA 1402 wing-alone. The other base wing was a natural flow wing which was previously designed specifically for a Mach number of 1.62. The results obtained showed that the natural wing-alone had a slightly higher lift-to-pressure drag than the natural wing with winglets.

  20. A STABLE, ACCURATE METHODOLOGY FOR HIGH MACH NUMBER, STRONG MAGNETIC FIELD MHD TURBULENCE WITH ADAPTIVE MESH REFINEMENT: RESOLUTION AND REFINEMENT STUDIES

    Energy Technology Data Exchange (ETDEWEB)

    Li, Pak Shing; Klein, Richard I. [Astronomy Department, University of California, Berkeley, CA 94720 (United States); Martin, Daniel F. [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States); McKee, Christopher F., E-mail: psli@astron.berkeley.edu, E-mail: klein@astron.berkeley.edu, E-mail: DFMartin@lbl.gov, E-mail: cmckee@astro.berkeley.edu [Physics Department and Astronomy Department, University of California, Berkeley, CA 94720 (United States)

    2012-02-01

    Performing a stable, long-duration simulation of driven MHD turbulence with a high thermal Mach number and a strong initial magnetic field is a challenge to high-order Godunov ideal MHD schemes because of the difficulty in guaranteeing positivity of the density and pressure. We have implemented a robust combination of reconstruction schemes, Riemann solvers, limiters, and constrained transport electromotive force averaging schemes that can meet this challenge, and using this strategy, we have developed a new adaptive mesh refinement (AMR) MHD module of the ORION2 code. We investigate the effects of AMR on several statistical properties of a turbulent ideal MHD system with a thermal Mach number of 10 and a plasma {beta}{sub 0} of 0.1 as initial conditions; our code is shown to be stable for simulations with higher Mach numbers (M{sub rms}= 17.3) and smaller plasma beta ({beta}{sub 0} = 0.0067) as well. Our results show that the quality of the turbulence simulation is generally related to the volume-averaged refinement. Our AMR simulations show that the turbulent dissipation coefficient for supersonic MHD turbulence is about 0.5, in agreement with unigrid simulations.

  1. A Stable, Accurate Methodology for High Mach Number, Strong Magnetic Field MHD Turbulence with Adaptive Mesh Refinement: Resolution and Refinement Studies

    CERN Document Server

    Li, Pak Shing; Klein, Richard I; McKee, Christopher F

    2011-01-01

    Performing a stable, long duration simulation of driven MHD turbulence with a high thermal Mach number and a strong initial magnetic field is a challenge to high-order Godunov ideal MHD schemes because of the difficulty in guaranteeing positivity of the density and pressure. We have implemented a robust combination of reconstruction schemes, Riemann solvers, limiters, and Constrained Transport EMF averaging schemes that can meet this challenge, and using this strategy, we have developed a new Adaptive Mesh Refinement (AMR) MHD module of the ORION2 code. We investigate the effects of AMR on several statistical properties of a turbulent ideal MHD system with a thermal Mach number of 10 and a plasma $\\beta_0$ of 0.1 as initial conditions; our code is shown to be stable for simulations with higher Mach numbers ($M_rms = 17.3$) and smaller plasma beta ($\\beta_0 = 0.0067$) as well. Our results show that the quality of the turbulence simulation is generally related to the volume-averaged refinement. Our AMR simulati...

  2. INTERSTELLAR NEUTRAL HELIUM IN THE HELIOSPHERE FROM IBEX OBSERVATIONS. IV. FLOW VECTOR, MACH NUMBER, AND ABUNDANCE OF THE WARM BREEZE

    Energy Technology Data Exchange (ETDEWEB)

    Kubiak, Marzena A.; Swaczyna, P.; Bzowski, M.; Sokół, J. M. [Space Research Centre of the Polish Academy of Sciences (CBK PAN), 00-716 Warsaw (Poland); Fuselier, S. A.; McComas, D. J. [Southwest Research Institute, San Antonio, TX (United States); Galli, A.; Wurz, P. [Physikalisches Institut, Universität Bern, Bern (Switzerland); Heirtzler, D.; Kucharek, H.; Leonard, T. W.; Möbius, E.; Park, J.; Schwadron, N. A., E-mail: mkubiak@cbk.waw.pl [Space Science Center and Department of Physics, University of New Hampshire, Durham, NH (United States)

    2016-04-15

    Following the high-precision determination of the velocity vector and temperature of the pristine interstellar neutral (ISN) He via a coordinated analysis summarized by McComas et al., we analyzed the Interstellar Boundary Explorer (IBEX) observations of neutral He left out from this analysis. These observations were collected during the ISN observation seasons 2010–2014 and cover the region in the Earth's orbit where the Warm Breeze (WB) persists. We used the same simulation model and a parameter fitting method very similar to that used for the analysis of ISN He. We approximated the parent population of the WB in front of the heliosphere with a homogeneous Maxwell–Boltzmann distribution function and found a temperature of ∼9500 K, an inflow speed of 11.3 km s{sup −1}, and an inflow longitude and latitude in the J2000 ecliptic coordinates 251.°6, 12.°0. The abundance of the WB relative to ISN He is 5.7% and the Mach number is 1.97. The newly determined inflow direction of the WB, the inflow directions of ISN H and ISN He, and the direction to the center of the IBEX Ribbon are almost perfectly co-planar, and this plane coincides within relatively narrow statistical uncertainties with the plane fitted only to the inflow directions of ISN He, ISN H, and the WB. This co-planarity lends support to the hypothesis that the WB is the secondary population of ISN He and that the center of the Ribbon coincides with the direction of the local interstellar magnetic field (ISMF). The common plane for the direction of the inflow of ISN gas, ISN H, the WB, and the local ISMF is given by the normal direction: ecliptic longitude 349.°7 ± 0.°6 and latitude 35.°7 ± 0.6 in the J2000 coordinates, with a correlation coefficient of 0.85.

  3. Surface pressure data for a supersonic-cruise airplane configuration at Mach numbers of 2.30, 2.96, 3.30

    Science.gov (United States)

    Shrout, B. L.; Corlett, W. A.; Collins, I. K.

    1979-01-01

    The tabulated results of surface pressure tests conducted on the wing and fuselage of an airplane model in the Langley Unitary Plan wind tunnel are presented without analysis. The model tested was that of a supersonic-cruise airplane with a highly swept arrow-wing planform, two engine nacelles mounted beneath the wing, and outboard vertical tails. Data were obtained at Mach numbers of 2.30, 2.96, and 3.30 for angles of attack from -4 deg to 12 deg. The Reynolds number for these tests was 6,560,000 per meter.

  4. An Experimental Parametric Study of Geometric, Reynolds Number, and Ratio of Specific Heats Effects in Three-Dimensional Sidewall Compression Scramjet Inlets at Mach 6

    Science.gov (United States)

    Holland, Scott D.; Murphy, Kelly J.

    1993-01-01

    Since mission profiles for airbreathing hypersonic vehicles such as the National Aero-Space Plane include single-stage-to-orbit requirements, real gas effects may become important with respect to engine performance. The effects of the decrease in the ratio of specific heats have been investigated in generic three-dimensional sidewall compression scramjet inlets with leading-edge sweep angles of 30 and 70 degrees. The effects of a decrease in ratio of specific heats were seen by comparing data from two facilities in two test gases: in the Langley Mach 6 CF4 Tunnel in tetrafluoromethane (where gamma=1.22) and in the Langley 15-Inch Mach 6 Air Tunnel in perfect gas air (where gamma=1.4). In addition to the simulated real gas effects, the parametric effects of cowl position, contraction ratio, leading-edge sweep, and Reynolds number were investigated in the 15-Inch Mach 6 Air Tunnel. The models were instrumented with a total of 45 static pressure orifices distributed on the sidewalls and baseplate. Surface streamline patterns were examined via oil flow, and schlieren videos were made of the external flow field. The results of these tests have significant implications to ground based testing of inlets in facilities which do not operate at flight enthalpies.

  5. Aeropropulsive characteristics of Mach numbers up to 2.2 of axisymmetric and nonaxisymmetric nozzles installed on an F-18 model

    Science.gov (United States)

    Capone, F. J.

    1982-01-01

    An investigation to determine the aeropropulsive characteristics of nonaxisymmetric nozzles on an F-18 jet effects model was conducted in the Langley 16-foot transonic tunnel and the AEDC 16-foot supersonic wind tunnel. The performance of a two dimensional convergent-divergent nozzle, a single expansion ramp nozzle, and a wedge nozzle was compared with that of the baseline axisymmetric nozzle. Test data were obtained at static conditions and at Mach numbers from 0.60 to 2.20 at an angle of attack of 0 deg. Nozzle pressure ratio was varied from jet-off to about 20.

  6. Calibration of HYPULSE for hypervelocity air flows corresponding to flight Mach numbers 13.5, 15, and 17

    Science.gov (United States)

    Calleja, John; Tamagno, Jose

    1993-01-01

    A series of air calibration tests were performed in GASL's HYPULSE facility in order to more accurately determine test section flow conditions for flows simulating total enthalpies in the Mach 13 to 17 range. Present calibration data supplements previous data and includes direct measurement of test section pitot and static pressure, acceleration tube wall pressure and heat transfer, and primary and secondary incident shock velocities. Useful test core diameters along with the corresponding free-stream conditions and usable testing times were determined. For the M13.5 condition, in-stream static pressure surveys showed the temporal and spacial uniformity of this quantity across the useful test core. In addition, finite fringe interferograms taken of the free-stream flow at the test section did not indicate the presence of any 'strong' wave system for any of the conditions investigated.

  7. A powerful double radio relic system discovered in PSZ1 G108.18-11.53: evidence for a shock with non-uniform Mach number?

    CERN Document Server

    de Gasperin, F; van Weeren, R J; Dawson, W A; Golovich, N; Wittman, D; Bonafede, A; Bruggen, M

    2015-01-01

    Diffuse radio emission in the form of radio halos and relics has been found in a number of merging galaxy clusters. These structures indicate that shock and turbulence associated with the merger accelerate electrons to relativistic energies. We report the discovery of a radio relic + radio halo system in PSZ1 G108.18-11.53 (z=0.335). This cluster hosts the second most powerful double radio relic system ever discovered. We observed PSZ1 G108.18-11.53 with the Giant Meterwave Radio Telescope (GMRT) and the Westerbork Synthesis Radio Telescope (WSRT). We obtained radio maps at 147, 323, 607 and 1380 MHz. We also observed the cluster with the Keck telescope, obtaining the spectroscopic redshift for 42 cluster members. From the injection index we obtained the Mach number of the shocks generating the two radio relics. For the southern shock we found M = 2.33^{+0.19}_{-0.26}, while the northern shock Mach number goes from M = 2.20^{+0.07}_{-0.14} in the north part down to M = 2.00^{+0.03}_{-0.08} in the southern reg...

  8. High-dynamic-range extinction mapping of infrared dark clouds: Dependence of density variance with sonic Mach number in molecular clouds

    CERN Document Server

    Kainulainen, Jouni

    2012-01-01

    Measuring the mass distribution of infrared dark clouds (IRDCs) over the wide dynamic range of their column densities is a fundamental obstacle in determining the initial conditions of high-mass star formation and star cluster formation. We present a new technique to derive high-dynamic-range, arcsecond-scale resolution column density data for IRDCs and demonstrate the potential of such data in measuring the density variance - sonic Mach number relation in molecular clouds. We combine near-infrared data from the UKIDSS/Galactic Plane Survey with mid-infrared data from the Spitzer/GLIMPSE survey to derive dust extinction maps for a sample of ten IRDCs. We then examine the linewidths of the IRDCs using 13CO line emission data from the FCRAO/Galactic Ring Survey and derive a column density - sonic Mach number relation for them. For comparison, we also examine the relation in a sample of nearby molecular clouds. The presented column density mapping technique provides a very capable, temperature independent tool f...

  9. Adaptive multilevel mesh refinement method for the solution of low Mach number reactive flows; Methode adaptative de raffinement local multi-niveaux pour le calcul d'ecoulements reactifs a faible nombre de Mach

    Energy Technology Data Exchange (ETDEWEB)

    Core, X.

    2002-02-01

    The isobar approximation for the system of the balance equations of mass, momentum, energy and chemical species is a suitable approximation to represent low Mach number reactive flows. In this approximation, which neglects acoustics phenomena, the mixture is hydrodynamically incompressible and the thermodynamic effects lead to an uniform compression of the system. We present a novel numerical scheme for this approximation. An incremental projection method, which uses the original form of mass balance equation, discretizes in time the Navier-Stokes equations. Spatial discretization is achieved through a finite volume approach on MAC-type staggered mesh. A higher order de-centered scheme is used to compute the convective fluxes. We associate to this discretization a local mesh refinement method, based on Flux Interface Correction technique. A first application concerns a forced flow with variable density which mimics a combustion problem. The second application is natural convection with first small temperature variations and then beyond the limit of validity of the Boussinesq approximation. Finally, we treat a third application which is a laminar diffusion flame. For each of these test problems, we demonstrate the robustness of the proposed numerical scheme, notably for the density spatial variations. We analyze the gain in accuracy obtained with the local mesh refinement method. (author)

  10. Visualization of Flow Separation Around an Atmospheric Entry Capsule at Low-Subsonic Mach Number Using Background-Oriented Schlieren (BOS)

    Science.gov (United States)

    Mizukaki, Toshiharu; Borg, Stephen E.; Danehy, Paul M.; Murman, Scott M.

    2014-01-01

    This paper presents the results of visualization of separated flow around a generic entry capsule that resembles the Apollo Command Module (CM) and the Orion Multi-Purpose Crew Vehicle (MPCV). The model was tested at flow speeds up to Mach 0.4 at a single angle of attack of 28 degrees. For manned spacecraft using capsule-shaped vehicles, certain flight operations such as emergency abort maneuvers soon after launch and flight just prior to parachute deployment during the final stages of entry, the command module may fly at low Mach number. Under these flow conditions, the separated flow generated from the heat-shield surface on both windward and leeward sides of the capsule dominates the wake flow downstream of the capsule. In this paper, flow visualization of the separated flow was conducted using the background-oriented schlieren (BOS) method, which has the capability of visualizing significantly separated wake flows without the particle seeding required by other techniques. Experimental results herein show that BOS has detection capability of density changes on the order of 10(sup-5).

  11. Wire number doubling in plasma-shell regime increases z-accelerator x-ray power

    Energy Technology Data Exchange (ETDEWEB)

    Sanford, T.W.L.; Spielman, R.B.; Chandler, G.A. [and others

    1997-11-01

    Doubling the number of tungsten wires from 120 to 240, keeping the mass fixed, increased the radiated x-ray power relative to the electrical power at the insulator stack of the z accelerator by (40{+-}20)% for 8.75- and 20-mm-radii z-pinch wire arrays. Radiation-magneto-hydrodynamic calculations suggest that the arrays were operating in the {open_quotes}plasma shell{close_quotes} regime, where the plasmas generated by the individual wires merge prior to the inward implosion of the entire array.

  12. Effect of Mach number, valve angle and length to diameter ratio on thermal performance in flow of air through Ranque Hilsch vortex tube

    Science.gov (United States)

    Devade, Kiran D.; Pise, Ashok T.

    2017-01-01

    Ranque Hilsch vortex tube is a device that can produce cold and hot air streams simultaneously from pressurized air. Performance of vortex tube is influenced by a number of geometrical and operational parameters. In this study parametric analysis of vortex tube is carried out. Air is used as the working fluid and geometrical parameters like length to diameter ratio (15, 16, 17, 18), exit valve angles (30°-90°), orifice diameters (5, 6 and 7 mm), 2 entry nozzles and tube divergence angle 4° is used for experimentation. Operational parameters like pressure (200-600 kPa), cold mass fraction (0-1) is varied and effect of Mach number at the inlet of the tube is investigated. The vortex tube is tested at sub sonic (0 tube is observed for CMF up to 0.5. Experimental correlations are proposed for optimum COP. Parametric correlation is developed for geometrical and operational parameters.

  13. Flight and wind-tunnel calibrations of a flush airdata sensor at high angles of attack and sideslip and at supersonic Mach numbers

    Science.gov (United States)

    Moes, Timothy R.; Whitmore, Stephen A.; Jordan, Frank L., Jr.

    1993-01-01

    A nonintrusive airdata-sensing system was calibrated in flight and wind-tunnel experiments to an angle of attack of 70 deg and to angles of sideslip of +/- 15 deg. Flight-calibration data have also been obtained to Mach 1.2. The sensor, known as the flush airdata sensor, was installed on the nosecap of an F-18 aircraft for flight tests and on a full-scale F-18 forebody for wind-tunnel tests. Flight tests occurred at the NASA Dryden Flight Research Facility, Edwards, California, using the F-18 High Alpha Research Vehicle. Wind-tunnel tests were conducted in the 30- by 60-ft wind tunnel at the NASA LaRC, Hampton, Virginia. The sensor consisted of 23 flush-mounted pressure ports arranged in concentric circles and located within 1.75 in. of the tip of the nosecap. An overdetermined mathematical model was used to relate the pressure measurements to the local airdata quantities. The mathematical model was based on potential flow over a sphere and was empirically adjusted based on flight and wind-tunnel data. For quasi-steady maneuvering, the mathematical model worked well throughout the subsonic, transonic, and low supersonic flight regimes. The model also worked well throughout the angles-of-attack and -sideslip regions studied.

  14. Effect of gaseous and solid simulated jet plumes on a 040A space shuttle launch configuration at Mach numbers from 1.6 to 2.2

    Science.gov (United States)

    Lanfranco, M. J.; Sparks, V. W.; Kavanaugh, A. T.

    1973-01-01

    An experimental investigation was conducted in a 9- by 7-foot supersonic wind tunnel to determine the effect of plume-induced flow separation and aspiration effects due to operation of both the orbiter and the solid rocket motors on a 0.019-scale model of the launch configuration of the space shuttle vehicle. Longitudinal and lateral-directional stability data were obtained at Mach numbers of 1.6, 2.0, and 2.2 with and without the engines operating. The plumes exiting from the engines were simulated by a cold gas jet supplied by an auxiliary 200 atmosphere air supply system, and by solid body plume simulators. Comparisons of the aerodynamic effects produced by these two simulation procedures are presented. The data indicate that the parameters most significantly affected by the jet plumes are the pitching moment, the elevon control effectiveness, the axial force, and the orbiter wing loads.

  15. Investigation of two-stage air-cooled turbine suitable for flight at Mach number of 2.5 II : blade design

    Science.gov (United States)

    Miser, James W; Stewart, Warner L

    1957-01-01

    A blade design study is presented for a two-stage air-cooled turbine suitable for flight at a Mach number of 2.5 for which velocity diagrams have been previously obtained. The detailed procedure used in the design of the blades is given. In addition, the design blade shapes, surface velocity distributions, inner and outer wall contours, and other design data are presented. Of all the blade rows, the first-stage rotor has the highest solidity, with a value of 2.289 at the mean section. The second-stage stator also had a high mean-section solidity of 1.927, mainly because of its high inlet whirl. The second-stage rotor has the highest value of the suction-surface diffusion parameter, with a value of 0.151. All other blade rows have values for this parameter under 0.100.

  16. Performance of High-pressure-ratio Axial-flow Compressor Using Highly Cambered NACA 65-series Blower Blades at High Mach Numbers

    Science.gov (United States)

    Voit, Charles H; Guentert, Donald C; Dugan, James F

    1950-01-01

    A complete stage of an axial-flow compressor was designed and built to investigate the possibility of obtaining a high pressure ratio with an acceptable efficiency through the use of the optimum combination of high blade loading and high relative inlet Mach number. Over-all stage performance was investigated over a range of flows at equivalent tip speeds of 418 to 836 feet per second. At design speed (836 ft/sec), a peak total-pressure ration of 1.445 was obtained with an adiabatic efficiency of 0.89. For design angle of attack at the mean radius, a total-pressure ratio of 1.392 was obtained.

  17. 基于预处理HLLEW格式的全速域数值算法%Preconditioning HLLEW Scheme for Flows at All Mach Numbers

    Institute of Scientific and Technical Information of China (English)

    刘中玉; 张明锋; 郑冠男; 杨国伟

    2016-01-01

    Based on HLLEW ( Harten⁃Lax⁃Van Leer⁃Einfeldt⁃Wada) scheme, low speed preconditioning technology is introduced to develop a three⁃dimensional Navier⁃Stokes solver for flows at all Mach numbers. Low speed preconditioning techniques is introduced to reconstruct dissipative term in HLLEW scheme and preconditioning HLLEW scheme is proposed. Implicit time⁃marching method is constructed based on preconditioning Jacobian Matrix. Results of NACA 4412 incompressible flow and RAE 2822 transonic flow with preconditioning HLLEW scheme are compared with results by original method and experimental data. It shows that preconditioning HLLEW method improves accuracy and convergence rate for low speed flow. It can be applied for flows at all Mach numbers.%基于HLLEW( Harten⁃Lax⁃Van Leer⁃Einfeldt⁃Wada)格式引入预处理技术发展适合求解全速域流场的三维Navier⁃Stokes求解器。引入低速预处理技术,重新构造HLLEW格式的耗散项,给出预处理后的HLLEW格式,并根据预处理后的雅克比矩阵构造相应的隐式时间推进方程。利用预处理方法求解 NACA 4412低速不可压流动与RAE 2822跨声速可压缩流动,并与实验结果及原有方法的计算结果对比。结果表明:预处理HLLEW格式不仅提高低速不可压缩流动的计算效率和精度,也保持了对可压缩流动的处理能力,是一种适用于全速域流场数值模拟的有效方法。

  18. Granular-flow rheology: Role of shear-rate number in transition regime

    Science.gov (United States)

    Chen, C.-L.; Ling, C.-H.

    1996-01-01

    This paper examines the rationale behind the semiempirical formulation of a generalized viscoplastic fluid (GVF) model in the light of the Reiner-Rivlin constitutive theory and the viscoplastic theory, thereby identifying the parameters that control the rheology of granular flow. The shear-rate number (N) proves to be among the most significant parameters identified from the GVF model. As N ??? 0 and N ??? ???, the GVF model can reduce asymptotically to the theoretical stress versus shear-rate relations in the macroviscous and graininertia regimes, respectively, where the grain concentration (C) also plays a major role in the rheology of granular flow. Using available data obtained from the rotating-cylinder experiments of neutrally buoyant solid spheres dispersing in an interstitial fluid, the shear stress for granular flow in transition between the two regimes proves dependent on N and C in addition to some material constants, such as the coefficient of restitution. The insufficiency of data on rotating-cylinder experiments cannot presently allow the GVF model to predict how a granular flow may behave in the entire range of N; however, the analyzed data provide an insight on the interrelation among the relevant dimensionless parameters.

  19. Experiment on smooth, circular cylinders in cross-flow in the critical Reynolds number regime

    Energy Technology Data Exchange (ETDEWEB)

    Miau, J.J.; Tsai, H.W.; Lin, Y.J.; Tu, J.K.; Fang, C.H.; Chen, M.C. [National Cheng Kung University, Department of Aeronautics and Astronautics, Tainan (China)

    2011-10-15

    Experiments were conducted for 2D circular cylinders at Reynolds numbers in the range of 1.73 x 10{sup 5}-5.86 x 10{sup 5}. In the experiment, two circular cylinder models made of acrylic and stainless steel, respectively, were employed, which have similar dimensions but different surface roughness. Particular attention was paid to the unsteady flow behaviors inferred by the signals obtained from the pressure taps on the cylinder models and by a hot-wire probe in the near-wake region. At Reynolds numbers pertaining to the initial transition from the subcritical to the critical regimes, pronounced pressure fluctuations were measured on the surfaces of both cylinder models, which were attributed to the excursion of unsteady flow separation over a large circumferential region. At the Reynolds numbers almost reaching the one-bubble state, it was noted that the development of separation bubble might switch from one side to the other with time. Wavelet analysis of the pressure signals measured simultaneously at {theta} = {+-}90 further revealed that when no separation bubble was developed, the instantaneous vortex-shedding frequencies could be clearly resolved, about 0.2, in terms of the Strouhal number. The results of oil-film flow visualization on the stainless steel cylinder of the one-bubble and two-bubble states showed that the flow reattachment region downstream of a separation bubble appeared not uniform along the span of the model. Thus, the three dimensionality was quite evident. (orig.)

  20. Production of microbubbles from axisymmetric flow focusing in the jetting regime for moderate Reynolds numbers.

    Science.gov (United States)

    Vega, E J; Acero, A J; Montanero, J M; Herrada, M A; Gañán-Calvo, A M

    2014-06-01

    We analyze both experimentally and numerically the formation of microbubbles in the jetting regime reached when a moderately viscous liquid stream focuses a gaseous meniscus inside a converging micronozzle. If the total (stagnation) pressure of the injected gas current is fixed upstream, then there are certain conditions on which a quasisteady gas meniscus forms. The meniscus tip is sharpened by the liquid stream down to the gas molecular scale. On the other side, monodisperse collections of microbubbles can be steadily produced in the jetting regime if the feeding capillary is appropriately located inside the nozzle. In this case, the microbubble size depends on the feeding capillary position. The numerical simulations for an imposed gas flow rate show that a recirculation cell appears in the gaseous meniscus for low enough values of that parameter. The experiments allow one to conclude that the bubble pinch-off comprises two phases: (i) a stretching motion of the precursor jet where the neck radius versus the time before the pinch essentially follows a potential law, and (ii) a final stage where a very thin and slender gaseous thread forms and eventually breaks apart into a number of micron-sized bubbles. Because of the difference between the free surface and core velocities, the gaseous jet breakage differs substantially from that of liquid capillary jets and gives rise to bubbles with diameters much larger than those expected from the Rayleigh-type capillary instability. The dependency of the bubble diameter upon the flow-rate ratio agrees with the scaling law derived by A. M. Gañán-Calvo [Phys. Rev. E 69, 027301 (2004)], although a slight influence of the Reynolds number can be observed in our experiments.

  1. EVOLUTION OF NUMBER CONCENTRATION OF NANO-PARTICLES UNDERGOING BROWNIAN COAGULATION IN THE TRANSITION REGIME

    Institute of Scientific and Technical Information of China (English)

    WANG Yu-ming; LIN Jian-zhong

    2011-01-01

    Evolution of number concentration of nanoparticles undergoing Brownian coagulation in the transition regime is studied theoretically and numerically.The results show that the curves of particle size distribution move toward the area with large particle diameters,the curve peak becomes lower and the range that particle diameters cover becomes wider as time elapses.In the process of coagulation the particles with small diameter disappear gradually and the particle size distribution remains a log-normal distribution.The change rate of the particle size distribution is more appreciable at the initial stage than that at the final stage.The initial Knudsen number has a significant effect on the coagulation rate which increases with decreasing the initial Knudsen number.The larger the initial geometric standard deviation is,the smaller the curve peak is,and the wider the area that curves cover is.The initial geometric standard deviation has a significant effect on the particle size distribution which can remain a self-preserving state when the initial geometric standard deviation is smaller than 2.With the increase of the diversity of initial particle size,the particle size distribution does not obey the log-normal distribution any more as time elapses.

  2. Static Longitudinal Stability and Control Characteristics At A Mach Number of 1.99 of a Lenticular-Shaped Reentry Vehicle

    Science.gov (United States)

    Jackson, Charles M., Jr.; Harris, Roy V., Jr.

    1960-01-01

    An investigation has been made in the Langley 4- by 4-foot supersonic pressure tunnel at a Mach number of 1.99 to determine the longitudinal stability and control characteristics of a reentry model consisting of a lenticular-shaped body with two fin configurations (horizontal fins with end plates). Effects of deflecting the larger size fins as pitch-control surfaces were also investigated. The results indicate that the body alone was unstable from an angle of attack of 0 deg to about 55 deg where it became stable and remained so to 90 deg. The addition of fins provided positive longitudinal stability throughout the angle-of-attack range and increased the lift-drag ratio of the configuration. Reducing the horizontal-fin area at the inboard trailing edge of the fin had only a small effect on the aerodynamic characteristics of the vehicle for the condition of no fin deflection. Deflecting the fins, appeared to be an effective means of pitch control and had only a small effect on lift-drag ratio.

  3. Wing Tip Drag Reduction at Nominal Take-Off Mach Number: An Approach to Local Active Flow Control with a Highly Robust Actuator System

    Directory of Open Access Journals (Sweden)

    Matthias Bauer

    2016-10-01

    Full Text Available This paper discusses wind tunnel test results aimed at advancing active flow control technology to increase the aerodynamic efficiency of an aircraft during take-off. A model of the outer section of a representative civil airliner wing was equipped with two-stage fluidic actuators between the slat edge and wing tip, where mechanical high-lift devices fail to integrate. The experiments were conducted at a nominal take-off Mach number of M = 0.2. At this incidence velocity, separation on the wing section, accompanied by increased drag, is triggered by the strong slat edge vortex at high angles of attack. On the basis of global force measurements and local static pressure data, the effect of pulsed blowing on the complex flow is evaluated, considering various momentum coefficients and spanwise distributions of the actuation effort. It is shown that through local intensification of forcing, a momentum coefficient of less than c μ = 0.6 % suffices to offset the stall by 2.4°, increase the maximum lift by more than 10% and reduce the drag by 37% compared to the uncontrolled flow.

  4. A High-Order Immersed Boundary Method for Acoustic Wave Scattering and Low-Mach Number Flow-Induced Sound in Complex Geometries.

    Science.gov (United States)

    Seo, Jung Hee; Mittal, Rajat

    2011-02-20

    A new sharp-interface immersed boundary method based approach for the computation of low-Mach number flow-induced sound around complex geometries is described. The underlying approach is based on a hydrodynamic/acoustic splitting technique where the incompressible flow is first computed using a second-order accurate immersed boundary solver. This is followed by the computation of sound using the linearized perturbed compressible equations (LPCE). The primary contribution of the current work is the development of a versatile, high-order accurate immersed boundary method for solving the LPCE in complex domains. This new method applies the boundary condition on the immersed boundary to a high-order by combining the ghost-cell approach with a weighted least-squares error method based on a high-order approximating polynomial. The method is validated for canonical acoustic wave scattering and flow-induced noise problems. Applications of this technique to relatively complex cases of practical interest are also presented.

  5. Interstellar neutral helium in the heliosphere from IBEX observations. III. Mach number of the flow, velocity vector, and temperature from the first six years of measurements

    CERN Document Server

    Bzowski, M; Kubiak, M A; Sokol, J M; Fuselier, S A; Galli, A; Heirtzler, D; Kucharek, H; Leonard, T W; McComas, D J; Moebius, E; Schwadron, N A; Wurz, P

    2015-01-01

    We analyzed observations of interstellar neutral helium (ISN~He) obtained from the Interstellar Boundary Explorer (IBEX) satellite during its first six years of operation. We used a refined version of the ISN~He simulation model, presented in the companion paper by Sokol_et al. 2015, and a sophisticated data correlation and uncertainty system and parameter fitting method, described in the companion paper by Swaczyna et al 2015. We analyzed the entire data set together and the yearly subsets, and found the temperature and velocity vector of ISN~He in front of the heliosphere. As seen in the previous studies, the allowable parameters are highly correlated and form a four-dimensional tube in the parameter space. The inflow longitudes obtained from the yearly data subsets show a spread of ~6 degree, with the other parameters varying accordingly along the parameter tube, and the minimum chi-square value is larger than expected. We found, however, that the Mach number of the ISN~He flow shows very little scatter an...

  6. XCAN project : coherent beam combining of large number fibers in femtosecond regime (Conference Presentation)

    Science.gov (United States)

    Antier, Marie; Le Dortz, Jeremy; Bourderionnet, Jerome; Larat, Christian; Lallier, Eric; Daniault, Louis; Fsaifes, Ihsan; Heilmann, Anke; Bellanger, Severine; Simon-Boisson, Christophe; Chanteloup, Jean-Christophe; Brignon, Arnaud

    2016-10-01

    The XCAN project, which is a three years project and began in 2015, carried out by Thales and the Ecole Polytechnique aims at developing a laser system based on the coherent combination of laser beams produced through a network of amplifying optical fibers. This technique provides an attractive mean of reaching simultaneously the high peak and high average powers required for various industrial, scientific and defense applications. The architecture has to be compatible with very large number of fibers (1000-10000). The goal of XCAN is to overcome all the key scientific and technological barriers to the design and development of an experimental laser demonstrator. The coherent addition of multiple individual phased beams is aimed to provide tens of Gigawatt peak power at 50 kHz repetition rate. Coherent beam combining (CBC) of fiber amplifiers involves a master oscillator which is split into N fiber channels and then amplified through series of polarization maintaining fiber pre-amplifiers and amplifiers. In the so-called tiled aperture configuration, the N fibers are arranged in an array and collimated in the near field of the laser output. The N beamlets then interfere constructively in the far field, and give a bright central lobe. CBC techniques with active phase locking involve phase mismatch detection, calculation of the correction and phase compensation of each amplifier by means of phase modulators. Interferometric phase measurement has proven to be particularly well suited to phase-lock a very large number of fibers in continuous regime. A small fraction of the N beamlets is imaged onto a camera. The beamlets interfere separately with a reference beam. The phase mismatch of each beam is then calculated from the interferences' position. In this presentation, we demonstrate the phase locking of 19 fibers in femtosecond pulse regime with this technique. In our first experiment, a master oscillator generates pulses of 300 fs (chirped at 200 ps). The beam is

  7. Investigations of the Deterioration of 22 Refractory Materials in a Mach Number 2 Jet at a Stagnation Temperature of 3,800 F

    Science.gov (United States)

    Lewis, B. W.

    1961-01-01

    A limited investigation of the deterioration characteristics of 22 refractory materials was conducted by exposing them to a stagnation temperature of 3,800 F in a Mach number 2 ceramic-heated jet at the Langley Research Center. The materials tested were six materials whose major constituent was silicon carbide, five cermets whose major constituent was titanium carbide, six materials whose major constituents were metal borides, four cermets containing alumina, and one silicon nitride model. Tests consisted of obtaining weight change and appearance changes for 1/2-inch-diameter hemispherical-nose cylindrical models exposed to the air jet for 30 seconds at a time for a total of four runs or 2 minutes exposure. Curves of weight changes plotted against the number of 30-second tests in the jet were obtained. Estimates of average surface temperature near the stagnation point of the model were obtained by use of a special temperature-measuring camera. The models were examined before and after the completion of the tests for possible changes in microstructure; no significant changes were found. The data obtained were analyzed with the view that the oxidation characteristics of the materials were the main factor in deterioration of the materials under the conditions of the tests. It was concluded that only those materials which changed in weight the least could be recommended for further extensive application-oriented evaluations. The following materials fell in this category: silicon carbide - silicon, chromium - 28-percent alumina cermet, titanium boride - 5-percent boron carbide. The remainder of the materials tested had oxidation characteristics which appeared to be too severely limiting of their general applications to flight vehicles.

  8. A Pressure-distribution Investigation of the Aerodynamic Characteristics of a Body of Revolution in the Vicinity of a Reflection Plane at Mach Numbers of 1.41 and 2.01

    Science.gov (United States)

    Gapcynski, John P; Carlson, Harry W

    1955-01-01

    The changes in the aerodynamic characteristics of a body of revolution with a fineness ratio of 8 have been determined at Mach numbers of 1.41 and 2.01, a Reynolds number, based on body length, of 4.54 x 10 to the 6th power, and angles of incidence of 0 degrees and plus or minus 3 degrees as the position of the body is varied with respect to a reflection plane. The data are compared with theoretical results.

  9. Free-Flight Zero-Lift Drag Results from a 1/5-Scale Model and Several Small-Scale Equivalent Bodies of Revolution of the Convair F-102 Configuration at Mach Numbers up to 1.34

    Science.gov (United States)

    Wallskog, Harvey A.

    1954-01-01

    A 1/5-scale, rocket-propelled model of the Convair F-102 configuration was tested in free flight to determine zero-lift drag at Mach numbers up to 1.34 and at Reynolds numbers comparable to those of the full-scale airplane. This large-scale model corresponded to the prototype airplane and had air flow through the duct. Additional zero-lift drag tests involved a series of small equivalent bodies of revolution which were launched by means of a helium gun. The several small-scale models tested corresponded to: the basic configuration, the 1/5-scale rocket-propelled model configuration, a 2-foot (full-scale) fuselage-extension configuration, and a 7-foot (full-scale) fuselage-extension configuration. Models designed to correspond to the area distribution at a Mach number of 1.0 were flown for each of these 'shapes and, in addition, models designed to correspond to the area distribution at a Mach number of 1.2 were flown for the 1/5-scale rocket-propelled model and the 7-foot-fuselage-extension configuration. The value of external pressure drag coefficient (including base drag) obtained from the large-scale rocket model was 0.0190 at a Mach number of 1..05 and the corresponding values from the equivalent-body tests varied from 0.0183 for the rocket-propelled model shape to 0.0137 for the 7-foot-fuselage-extension configuration. From the results of tests of equivalent bodies designed to correspond to the area distribution at a Mach number of 1.0, it is evident that the small changes in shape incorporated in the basic and 2-foot-fuselage-extension configurations from that of the rocket-propelled model configuration will provide no significant change in pressure drag. On the other hand, the data from the 7-foot-fuselage-extension model indicate a substantial reduction in pressure drag at transonic speeds.

  10. Dispersion in the large-deviation regime. Part II: cellular flow at large P\\'eclet number

    CERN Document Server

    Haynes, P H

    2014-01-01

    A standard model for the study of scalar dispersion through advection and molecular diffusion is a two-dimensional periodic flow with closed streamlines inside periodic cells. Over long time scales, the dispersion of a scalar in this flow can be characterised by an effective diffusivity that is a factor $\\mathrm{Pe}^{1/2}$ larger than molecular diffusivity when the P\\'eclet number $\\mathrm{Pe}$ is large. Here we provide a more complete description of dispersion in this regime by applying the large-deviation theory developed in Part I of this paper. We derive approximations to the rate function governing the scalar concentration at large time $t$ by carrying out an asymptotic analysis of the relevant family of eigenvalue problems. We identify two asymptotic regimes and make predictions for the rate function and spatial structure of the scalar. Regime I applies to distances from the release point that satisfy $|\\boldsymbol{x}| = O(\\mathrm{Pe}^{1/4} t)$ . The concentration in this regime is isotropic at large sc...

  11. Heat Transfer between an Individual Carbon Nanotube and Gas Environment in a Wide Knudsen Number Regime

    Directory of Open Access Journals (Sweden)

    Hai-Dong Wang

    2013-01-01

    Full Text Available Applications of carbon nanotube (CNT and graphene in thermal management have recently attracted significant attention. However, the lack of efficient prediction formula for heat transfer coefficient between nanomaterials and gas environment limits the further development of this technique. In this work, a kinetic model has been established to predict the heat transfer coefficient of an individual CNT in gas environment. The heat dissipation around the CNT is governed by molecular collisions, and outside the collision layer, the heat conduction is dominant. At nanoscales, the natural convection can be neglected. In order to describe the intermolecular collisions around the CNT quantitatively, a correction factor 1/24 is introduced and agrees well with the experimental observation. The prediction of the present model is in good agreement with our experimental results in free molecular regime. Further, a maximum heat transfer coefficient occurs at a critical diameter of several nanometers, providing guidelines on the practical design of CNT-based heat spreaders.

  12. Dynamics of compressional Mach cones in a strongly coupled complex plasma

    CERN Document Server

    Bandyopadhyay, P; Kadyan, Sangeeta; Sen, Abhijit

    2016-01-01

    Using a Generalised-Hydrodynamic (GH) fluid model we study the influence of strong coupling induced modification of the fluid compressibility on the dynamics of compressional Mach cones in a dusty plasma medium. A significant structural change of lateral wakes for a given Mach number and Epstein drag force is found in the strongly coupled regime. With the increase of fluid compressibility, the peak amplitude of the normalised perturbed dust density first increases and then decreases monotonically after reaching its maximum value. It is also noticed that the opening angle of the cone structure decreases with the increase of the compressibility of the medium and the arm of the Mach cone breaks up into small structures in the velocity vector profile when the coupling between the dust particles increases.

  13. Mach-like capillary-gravity wakes.

    Science.gov (United States)

    Moisy, Frédéric; Rabaud, Marc

    2014-08-01

    We determine experimentally the angle α of maximum wave amplitude in the far-field wake behind a vertical surface-piercing cylinder translated at constant velocity U for Bond numbers Bo(D)=D/λ(c) ranging between 0.1 and 4.2, where D is the cylinder diameter and λ(c) the capillary length. In all cases the wake angle is found to follow a Mach-like law at large velocity, α∼U(-1), but with different prefactors depending on the value of Bo(D). For small Bo(D) (large capillary effects), the wake angle approximately follows the law α≃c(g,min)/U, where c(g,min) is the minimum group velocity of capillary-gravity waves. For larger Bo(D) (weak capillary effects), we recover a law α∼√[gD]/U similar to that found for ship wakes at large velocity [Rabaud and Moisy, Phys. Rev. Lett. 110, 214503 (2013)]. Using the general property of dispersive waves that the characteristic wavelength of the wave packet emitted by a disturbance is of order of the disturbance size, we propose a simple model that describes the transition between these two Mach-like regimes as the Bond number is varied. We show that the new capillary law α≃c(g,min)/U originates from the presence of a capillary cusp angle (distinct from the usual gravity cusp angle), along which the energy radiated by the disturbance accumulates for Bond numbers of order of unity. This model, complemented by numerical simulations of the surface elevation induced by a moving Gaussian pressure disturbance, is in qualitative agreement with experimental measurements.

  14. Performance of a Supersonic Ramp-type Side Inlet with Ram-scoop Throat Bleed and Varying Fuselage Boundary-layer Removal : Mach Number Range 1.5 to 2.0 / Glenn A. Mitchell and Robert C. Campbell

    Science.gov (United States)

    Mitchell, Glenn A; Campbell, Robert C

    1957-01-01

    Provided sufficient throat bleed was employed, maximum pressure recoveries of 0.87 to 0.88 at Mach number 2.0 were obtained for a fuselage-mounted 14 degrees ramp inlet regardless of the amount of fuselage boundary layer ingested. The addition of inlet side fairings yielded further increases in pressure recovery to 0.90 to 0.91, decreased critical drag coefficients, and increased critical mass-flow ratios. With throat bleed, peak pressure recoveries and calculated thrust-minus-drag values were comparable at two axial positions of the scoop and were highest with the greatest amount of fuselage boundary layer ingested.

  15. The Spectral Amplitude of Stellar Convection and Its Scaling in the High-Rayleigh-number Regime

    Science.gov (United States)

    Featherstone, Nicholas A.; Hindman, Bradley W.

    2016-02-01

    Convection plays a central role in the dynamics of any stellar interior, and yet its operation remains largely hidden from direct observation. As a result, much of our understanding concerning stellar convection necessarily derives from theoretical and computational models. The Sun is, however, exceptional in that regard. The wealth of observational data afforded by its proximity provides a unique test bed for comparing convection models against observations. When such comparisons are carried out, surprising inconsistencies between those models and observations become apparent. Both photospheric and helioseismic measurements suggest that convection simulations may overestimate convective flow speeds on large spatial scales. Moreover, many solar convection simulations have difficulty reproducing the observed solar differential rotation owing to this apparent overestimation. We present a series of three-dimensional stellar convection simulations designed to examine how the amplitude and spectral distribution of convective flows are established within a star’s interior. While these simulations are nonmagnetic and nonrotating in nature, they demonstrate two robust phenomena. When run with sufficiently high Rayleigh number, the integrated kinetic energy of the convection becomes effectively independent of thermal diffusion, but the spectral distribution of that kinetic energy remains sensitive to both of these quantities. A simulation that has converged to a diffusion-independent value of kinetic energy will divide that energy between spatial scales such that low-wavenumber power is overestimated and high-wavenumber power is underestimated relative to a comparable system possessing higher Rayleigh number. We discuss the implications of these results in light of the current inconsistencies between models and observations.

  16. Numbers of microorganisms occurring in black earth under long-term maize monoculture grown under different cultivation regimes

    Directory of Open Access Journals (Sweden)

    Agnieszka Mocek-Płóciniak

    2013-06-01

    Full Text Available The study presents counts of different groups of microorganisms occurring in the upper horizon of black earth (Phaeozems following long-term maize monoculture growing under various tillage regimes (A – direct sowing, B – direct sowing with introduction after 10 years (2008 of a single autumn deep ploughing, C – direct sowing with introduction after 10 years (2008 of a single autumn deep ploughing together with a full dose of farmyard manure. Samples were collected from two depths (0-15 and 15-30 cm. Numbers of oligotrophs, copiotrophs, actinomycetes and fungi against the background of soil basic physico-chemical properties were determined. The obtained research results were subjected to statistical analysis. It was found that principal physico-chemical properties of the examined soil were, generally speaking, similar. In addition, no significant differences between the numbers of many groups of microorganisms and methods of cultivation were observed irrespective of the depth of soil samples collection.

  17. Ernst Mach a deeper look : documents and new perspectives

    CERN Document Server

    1992-01-01

    Ernst Mach -- A Deeper Look has been written to reveal to English-speaking readers the recent revival of interest in Ernst Mach in Europe and Japan. The book is a storehouse of new information on Mach as a philosopher, historian, scientist and person, containing a number of biographical and philosophical manuscripts publihsed for the first time, along with correspondence and other matters published for the first time in English. The book also provides English translations of Mach's controversies with leading physicists and psychologists, such as Max Planck and Carl Stumpf, and offers basic evidence for resolving Mach's position on atomism and Einstein's theory of relativity. Mach's scientific, philosophical and personal influence in a number of countries -- Austria, Germany, Bohemia and Yugoslavia among them -- has been carefully explored and many aspects detailed for the first time. All of the articles are eminently readable, especially those written by Mach's sister. They are deeply researched, new interpre...

  18. Optimization Design of Two-Dimensional Hypersonic Curved Compression Surface with Controllable Mach Number Distribution%马赫数分布可控的二元高超弯曲压缩面优化设计

    Institute of Scientific and Technical Information of China (English)

    翟永玺; 张堃元; 王磊; 李永洲; 张林

    2014-01-01

    A parametric research on the curved compression surface with controllable Mach number distri-bution was commenced to find the effect regularity of design parameters on the performance parameters of curved compression surface. On this basis,a polynomial response surface proxy model was built to make a multi-objec-tive optimization,and a hypersonic curved shock two-dimensional inlet was designed based on the optimization result, the performance was compared with the three-ramp compression inlet which was designed under the same constraints. Results indicate among the design parameters, the initial compress angle θ and the factor C and factor md1 affect most. The flow coefficient of the innovative inlet is up to 0.769 at Mach 4,when Mach num-ber ranges from 4 to 7,the two inlets have equally the same mass capture ratio,while the innovative inlet has high total pressure recovery of throat and outlet section. Compared with the relative three-ramp inlet , the total pressure recovery of throat section of the innovative inlet increased by 6.5%at Mach 4, 8.4%at Mach 6, and 10.7%at Mach 7.%针对一种马赫数分布可控的二元高超弯曲压缩面进行参数化研究,获得其设计参数对压缩面性能的影响规律,在此基础上建立多项式响应面代理模型并进行多目标优化,基于优化结果设计了二元弯曲激波进气道,并与同等约束条件下的三楔进气道进行比较。结果表明:压缩面初始压缩角θ与马赫数梯度函数中的设计参数md1,C对压缩面性能影响最为显著;Ma∞=4.0时弯曲激波进气道流量系数达0.769,与三楔进气道相比,在Ma∞=4~7工作范围内的流量捕获能力相当,但其喉道、出口截面的总压恢复系数均高于三楔进气道,在Ma∞=4,6,7工况下,喉道截面总压恢复分别有6.5%,8.4%和10.7%的提高。

  19. Aerodynamic pressure and heating-rate distributions in tile gaps around chine regions with pressure gradients at a Mach number of 6.6

    Science.gov (United States)

    Hunt, L. Roane; Notestine, Kristopher K.

    1990-06-01

    Surface and gap pressures and heating-rate distributions were obtained for simulated Thermal Protection System (TPS) tile arrays on the curved surface test apparatus of the Langley 8-Foot High Temperature Tunnel at Mach 6.6. The results indicated that the chine gap pressures varied inversely with gap width because larger gap widths allowed greater venting from the gap to the lower model side pressures. Lower gap pressures caused greater flow ingress from the surface and increased gap heating. Generally, gap heating was greater in the longitudinal gaps than in the circumferential gaps. Gap heating decreased with increasing gap depth. Circumferential gap heating at the mid-depth was generally less than about 10 percent of the external surface value. Gap heating was most severe at local T-gap junctions and tile-to-tile forward-facing steps that caused the greatest heating from flow impingement. The use of flow stoppers at discrete locations reduced heating from flow impingement. The use of flow stoppers at discrete locations reduced heating in most gaps but increased heating in others. Limited use of flow stoppers or gap filler in longitudinal gaps could reduce gap heating in open circumferential gaps in regions of high surface pressure gradients.

  20. A non-conformal finite element/finite volume scheme for the non-structured grid-based approximation of low Mach number flows; Un schema elements finis non-conformes/volumes finis pour l'approximation en maillages non-structures des ecoulements a faible nombre de Mach

    Energy Technology Data Exchange (ETDEWEB)

    Ansanay-Alex, G.

    2009-06-17

    The development of simulation codes aimed at a precise simulation of fires requires a precise approach of flame front phenomena by using very fine grids. The need to take different spatial scale into consideration leads to a local grid refinement and to a discretization with homogeneous grid for computing time and memory purposes. The author reports the approximation of the non-linear convection term, the scalar advection-diffusion in finite volumes, numerical simulations of a flow in a bent tube, of a three-dimensional laminar flame and of a low Mach number an-isotherm flow. Non conformal finite elements are also presented (Rannacher-Turek and Crouzeix-Raviart elements)

  1. Exploratory investigation of lift induced on a swept wing by a two-dimensional partial-span deflected jet at Mach numbers from 0.20 to 1.30

    Science.gov (United States)

    Capone, F. J.

    1972-01-01

    An exploratory investigation was conducted in the Langley 16-foot transonic tunnel at Mach numbers from 0.20 to 1.30 to determine the induced lift characteristics of a body and swept-wing configuration having a partial-span two-dimensional propulsive nozzle with exhaust exit in the notch of the swept-wing trailing edge. The Reynolds number per meter varied from 4,900,000 to 14,030,000. The effects on wing-body characteristics of deflecting the propulsive jet in the flap mode at nominal exhaust-nozzle deflection angles of 0 deg and 30 deg were studied for two nozzle designs with different geometry and wing spans.

  2. A pressure-based semi-implicit space-time discontinuous Galerkin method on staggered unstructured meshes for the solution of the compressible Navier-Stokes equations at all Mach numbers

    Science.gov (United States)

    Tavelli, Maurizio; Dumbser, Michael

    2017-07-01

    We propose a new arbitrary high order accurate semi-implicit space-time discontinuous Galerkin (DG) method for the solution of the two and three dimensional compressible Euler and Navier-Stokes equations on staggered unstructured curved meshes. The method is pressure-based and semi-implicit and is able to deal with all Mach number flows. The new DG scheme extends the seminal ideas outlined in [1], where a second order semi-implicit finite volume method for the solution of the compressible Navier-Stokes equations with a general equation of state was introduced on staggered Cartesian grids. Regarding the high order extension we follow [2], where a staggered space-time DG scheme for the incompressible Navier-Stokes equations was presented. In our scheme, the discrete pressure is defined on the primal grid, while the discrete velocity field and the density are defined on a face-based staggered dual grid. Then, the mass conservation equation, as well as the nonlinear convective terms in the momentum equation and the transport of kinetic energy in the energy equation are discretized explicitly, while the pressure terms appearing in the momentum and energy equation are discretized implicitly. Formal substitution of the discrete momentum equation into the total energy conservation equation yields a linear system for only one unknown, namely the scalar pressure. Here the equation of state is assumed linear with respect to the pressure. The enthalpy and the kinetic energy are taken explicitly and are then updated using a simple Picard procedure. Thanks to the use of a staggered grid, the final pressure system is a very sparse block five-point system for three dimensional problems and it is a block four-point system in the two dimensional case. Furthermore, for high order in space and piecewise constant polynomials in time, the system is observed to be symmetric and positive definite. This allows to use fast linear solvers such as the conjugate gradient (CG) method. In

  3. Space Shuttle Orbiter trimmed center-of-gravity extension study. Volume 8: Effects of configuration modifications on the aerodynamic characteristics of the 140 A/B Orbiter at a Mach number of 5.97

    Science.gov (United States)

    Phillips, W. P.

    1984-01-01

    Aerodynamic characteristics at M=5.97 for the 140 A/B Space Shuttle Orbiter configuration and for the configuration modified by geometric changes in the wing planform fillet region and the fuselage forebody are presented. The modifications, designed to extend the orbiter's longitudinal trim capability to more forward center of gravity locations, include reshaping the baseline wing fillet, changing the fuselage forebody camber, and adding canards. The Langley 20 inch Mach 6 Tunnel at a Reynolds number of approximately 6 million based on fuselage reference length was used. The angle of attack range of the investigation varied from about 15 deg to 35 deg at 0 deg and -5 deg sideslip angles. Data are obtained with the elevators and body flap deflected at appropriate negative and positive conditions to assess the trim limits.

  4. Study on Mach stems induced by interaction of planar shock waves on two intersecting wedges

    Institute of Scientific and Technical Information of China (English)

    Gaoxiang Xiang; Chun Wang; Honghui Teng; Yang Yang; Zonglin Jiang

    2016-01-01

    The properties of Mach stems in hypersonic corner flow induced by Mach interaction over 3D inter-secting wedges were studied theoretically and numerically. A new method called “spatial dimension reduction” was used to analyze theoretically the location and Mach num-ber behind Mach stems. By using this approach, the problem of 3D steady shock/shock interaction over 3D intersecting wedges was transformed into a 2D moving one on cross sec-tions, which can be solved by shock-polar theory and shock dynamics theory. The properties of Mach interaction over 3D intersecting wedges can be analyzed with the new method, including pressure, temperature, density in the vicinity of triple points, location, and Mach number behind Mach stems. Theoretical results were compared with numerical results, and good agreement was obtained. Also, the influence of Mach number and wedge angle on the properties of a 3D Mach stem was studied.

  5. Experimental Determination of the Recovery Factor and Analytical Solution of the Conical Flow Field for a 20 deg Included Angle Cone at Mach Numbers of 4.6 and 6.0 and Stagnation Temperatures to 2600 degree R

    Science.gov (United States)

    Pfyl, Frank A.; Presley, Leroy L.

    1961-01-01

    The local recovery factor was determined experimentally along the surface of a thin-walled 20 deg included angle cone for Mach numbers near 6.0 at stagnation temperatures between 1200 deg R and 2600 deg R. In addition, a similar cone configuration was tested at Mach numbers near 4.5 at stagnation temperatures of approximately 612 deg R. The local Reynolds number based on flow properties at the edge of the boundary layer ranged between 0.1 x 10(exp 4) and 3.5 x 10(exp 4) for tests at temperatures above 1200 deg R and between 6 x 10(exp 4) and 25 x 10(exp 4) for tests at temperatures near 612 deg R. The results indicated, generally, that the recovery factor can be predicted satisfactorily using the square root of the Prandtl number. No conclusion could be made as to the necessity of evaluating the Prandtl number at a reference temperature given by an empirical equation, as opposed to evaluating the Prandtl number at the wall temperature or static temperature of the gas at the cone surface. For the tests at temperatures above 1200 deg R (indicated herein as the tests conducted in the slip-flow region), two definite trends in the recovery data were observed - one of increasing recovery factor with decreasing stagnation pressure, which was associated with slip-flow effects and one of decreasing recovery factor with increasing temperature. The true cause of the latter trend could not be ascertained, but it was shown that this trend was not appreciably altered by the sources of error of the magnitude considered herein. The real-gas equations of state were used to determine accurately the local stream properties at the outer edge of the boundary layer of the cone. Included in the report, therefore, is a general solution for the conical flow of a real gas using the Beattie-Bridgeman equation of state. The largest effect of temperature was seen to be in the terms which were dependent upon the internal energy of the gas. The pressure and hence the pressure drag terms were

  6. Surface-Pressure and Flow-Visualization Data at Mach Number of 1.60 for Three 65 deg Delta Wings Varying in Leading-Edge Radius and Camber

    Science.gov (United States)

    McMIllin, S. Naomi; Byrd, James E.; Parmar, Devendra S.; Bezos-O'Connor, Gaudy M.; Forrest, Dana K.; Bowen, Susan

    1996-01-01

    An experimental investigation of the effect of leading-edge radius, camber, Reynolds number, and boundary-layer state on the incipient separation of a delta wing at supersonic speeds was conducted at the Langley Unitary Plan Wind Tunnel at Mach number of 1.60 over a free-stream Reynolds number range of 1 x 106 to 5 x 106 ft-1. The three delta wing models examined had a 65 deg swept leading edge and varied in cross-sectional shape: a sharp wedge, a 20:1 ellipse, and a 20:1 ellipse with a -9.750 circular camber imposed across the span. The wings were tested with and without transition grit applied. Surface-pressure coefficient data and flow-visualization data are electronically stored on the CD-ROM. The data indicated that by rounding the wing leading edge or cambering the wing in the spanwise direction, the onset of leading-edge separation on a delta wing can be raised to a higher angle of attack than that observed on a sharp-edged delta wing. The data also showed that the onset of leading-edge separation can be raised to a higher angle of attack by forcing boundary-layer transition to occur closer to the wing leading edge by the application of grit or the increase in free-stream Reynolds number.

  7. Experimental wake survey behind Viking 1975 entry vehicle at angles of attack of 0 deg and 5 deg, Mach numbers from 1.60 to 3.95, and longitudinal stations from 1.0 to 8.39 body diameters

    Science.gov (United States)

    Brown, C. A., Jr.; Campbell, J. F.; Tudor, D. H.

    1971-01-01

    An investigation was conducted to obtain flow properties in the wake of the Viking '75 entry vehicle at Mach numbers from 1.60 to 3.95 and at angles of attack of 0 deg and 5 deg. The wake flow properties were calculated from total and static pressures measured with a pressure rake at longitudinal stations varying from 1.0 to 8.39 body diameters and lateral stations varying from -0.42 to 3.0 body diameters. These measurements showed a a consistent trend throughout the range of Mach numbers and longitudinal distances and an increase in dynamic pressure with increasing downstream position.

  8. An Investigation of Single- and Dual-Rotation Propellers at Positive and Negative Thrust, and in Combination with an NACA 1-series D-Type Cowling at Mach Numbers up to 0.84

    Science.gov (United States)

    Reynolds, Robert M; Samonds, Robert I; Walker, John H

    1957-01-01

    An investigation has been made to determine the aerodynamic characteristics of the NACA 4-(5)(05)-041 four-blade, single-relation propeller and the NACA 4-(5)(05)-037 six- and eight-blade, dual-rotation propellers in combination with various spinners and NACA d-type spinner-cowling combinations at Mach numbers up to 0.84. Propeller force characteristics, local velocity distributions in the propeller planes, inlet pressure recoveries, and static-pressure distributions on the cowling surfaces were measured for a wide range of blade angles, advance ratios, and inlet-velocity ratios. Included are data showing: (a) the effect of extended cylindrical spinners on the characteristics of the single-rotation propeller, (b) the effect of variation of the difference in blade angle setting between the front and rear components of the dual-rotation propellers, (c) the negative- and static-thrust characteristics of the propellers with 1 series spinners, and (d) the effects of ideal- and platform-type propeller-spinner junctures on the pressure-recovery characteristics of the single-rotation propeller-spinner-cowling combination.

  9. Effect of nozzle lateral spacing on afterbody drag and performance of twin-jet afterbody models with convergent-divergent nozzles at Mach numbers up to 2.2

    Science.gov (United States)

    Pendergraft, O. C., Jr.; Schmeer, J. W.

    1972-01-01

    Twin-jet afterbody models were investigated by using two balances to measure the thrust-minus-total drag and the afterbody drag, separately, at static conditions and at Mach numbers up to 2.2 for an angle of attack of 0 deg. Hinged-flap convergent-divergent nozzles were tested at subsonic-cruise- and maximum-afterburning-power settings with a high-pressure air system used to provide jet-total-pressure ratios up to 20. Two nozzle lateral spacings were studied, using afterbodies with similar interfairing shapes but with different longitudinal cross-sectional area distributions. Alternate, blunter, interfairings with different shapes for the two spacings, which produced afterbodies having identical cross-sectional area progressions corresponding to an axisymmetric minimum wave-drag configuration, were also tested. The results indicate that the wide-spaced configurations improved the flow field around the nozzles, thereby reducing drag on the cruise nozzles; however, the increased surface and projected cross-sectional areas caused an increase in afterbody drag. Except for a slight advantage with cruise nozzles at subsonic speeds, the wide-spaced configurations had the higher total drag at all other test conditions.

  10. Aeroacoustic computation of low mach number flow

    Energy Technology Data Exchange (ETDEWEB)

    Skriver Dahl, K. [Risoe National Laboratory, Roskilde (Denmark)

    1997-12-31

    The possibilities of applying a recently developed numerical technique to predict aerodynamically generated sound from wind turbines is explored. The technique is a perturbation technique that has the advantage that the underlying flow field and the sound field are computed separately. Solution of the incompressible, time dependent flow field yields a hydrodynamic density correction to the incompressible constant density. The sound field is calculated from a set of equations governing the inviscid perturbations about the corrected flow field. Here, the emphasis is placed on the computation of the sound field. The nonlinear partial differential equations governing the sound fields are solved numerically using an explicit MacCormack scheme. Two types of non-reflecting boundary conditions are applied; one based on the asymptotic solution of the governing equations and the other based on a characteristic analysis of the governing equations. The former condition is easy to use and it performs slightly better than the charcteristic based condition. The technique is applied to the problems of the sound generation of a co-rotating vortex pair, which is a quadrupole, and the viscous flow over a circular cylinder, which is a dipole. Numerical results agree very well with the analytical solution for the problem of the co-rotating vortex pair. Numerical results for the viscous flow over a cylinder are presented and evaluated qualitatively. (au)

  11. 基于神经网络的风洞马赫数预测控制仿真研究%Predictive Control Simulation Research of Mach Number in Wind Tunnel Based on Neural Network

    Institute of Scientific and Technical Information of China (English)

    金志伟; 杨兴锐; 苏北辰

    2016-01-01

    It is hard to use precise mechanism to describe system dynamic feature of 2.4 m transonic wind tunnel. Put forwards wind tunnel Mach number predictive control strategy based on neural network. Combine the advanteges of model predictive control and nueral network modeling, it is good at processing control parameter unkown, unlinear system and time varing system. Use dynamic response of nueral network based on radial basis function and nonlinear neural network to capture system dynamic feature, apply nerual nwork model in MPC structure. The simulation results show that the control strtegy has a good control effect and trace performance.%针对2.4 m跨声速风洞很难用精确的机理模型表示系统的动态特性的问题,提出了基于神经网络模型的风洞马赫数预测控制策略.综合了模型预测控制和神经网络建模的优点,对于控制参数未知、非线性和时变系统具有很好的处理效果.利用基于径向基函数的神经网络模型预测系统的动态响应、非线性神经网络模型可以在训练过程中捕获系统的动态特性等措施,实现了将神经网络模型应用到MPC结构中.仿真结果表明,该控制策略具有很好的跟踪性能和控制效果.

  12. Space Shuttle Orbiter trimmed center-of-gravity extension study. Volume 9: Effects of configuration modifications on the aerodynamic characteristics of the 140 A/B Orbiter at Mach numbers of 1.5, 2.0, and 2.5. [wind tunnel tests

    Science.gov (United States)

    Phillips, W. P.; Fournier, R. H.

    1985-01-01

    Wind-tunnel tests were conducted at Mach 1.5 to 2.5 to determine the effect of modifications designed to extend the forward center-of-gravity trim capability on the static longitudal and lateral directional characteristics of a Space shuttle 140 A/B orbiter model (0.01 scale). The modifications consisted of a forward-extended wing fillet, a flat plate canard, and a blended canard. The investigation was conducted in the low Mach number test section of the Langley unitary plan wind tunnel at a Reynolds number of approximately 2.15 million based on the fuselage reference length. The test angle of attack range was -1 deg to 32 deg and the sideslip angles were 0 deg and 5 deg.

  13. Experimental Verification Of The Osculating Cones Method For Two Waverider Forebodies At Mach 4 and 6

    Science.gov (United States)

    Miller, Rolf W.; Argrow, Brian M.; Center, Kenneth B.; Brauckmann, Gregory J.; Rhode, Matthew N.

    1998-01-01

    The NASA Langley Research Center Unitary Plan Wind Tunnel and the 20-Inch Mach 6 Tunnel were used to test two osculating cones waverider models. The Mach-4 and Mach-6 shapes were generated using the interactive design tool WIPAR. WIPAR performance predictions are compared to the experimental results. Vapor screen results for the Mach-4 model at the on- design Mach number provide visual verification that the shock is attached along the entire leading edge, within the limits of observation. WIPAR predictions of pressure distributions and aerodynamic coefficients show general agreement with the corresponding experimental values.

  14. Experimental wake survey behind Viking 75 entry vehicle at angles of attack of 0 deg, 5 deg, and 10 deg, Mach numbers from 0.20 to 1.20, and longitudinal stations from 1.50 to 11.00 body diameters

    Science.gov (United States)

    Brown, C. A., Jr.; Campbell, J. F.

    1973-01-01

    An investigation was conducted to obtain flow properties in the wake of a preliminary configuration of the Viking '75 Entry Vehicle at Mach numbers from 0.20 to 1.20 and at angles of attack of 0 deg, 5 deg, and 10 deg. The wake flow properties were calculated from total and static pressures measured with a pressure rake at longitudinal stations varying from 1.50 to 11.00 body diameters, and are presented in tabulated and plotted form. The wake properties were essentially symmetrical about the X-axis at alpha = 0 deg and the profiles were shifted away from the X-axis at angles of attack. An unexpected reduction in wake property ratios occurred as the Mach number increased from 0.60 to 1.00; these ratios then increased as the Mach number increased to 1.20. The reduction was present for all the longitudinal stations of the tests and decreased with increased longitudinal distance.

  15. Ernst Mach on the Self

    OpenAIRE

    Schrenk, Markus

    2011-01-01

    In his Contributions to the Analysis of the Sensations (Mach 1885) the phenomenalist philosopher Ernst Mach confronts us with a difficulty: “If we regard the Ego as a real unity, we become involved in the following dilemma: either we must set over against the Ego a world of unknowable entities […] or we must regard the whole world, the Egos of other people included, as comprised in our own Ego.” (Mach 1885: 21) In other words, if we start from a phenomenalist viewpoint, i.e., if we believ...

  16. A finite element method with a high order L{sup 2} decomposition devoted to the simulation of diphasic low Mach number flows; Une methode elements finis a decomposition L{sup 2} d'ordre eleve motivee par la simulation d'ecoulement diphasique bas mach

    Energy Technology Data Exchange (ETDEWEB)

    Fortin, T

    2006-05-15

    This work deals with the discretization of Navier-Stokes equations using different finite element methods adapted to the problem of two-phase flows. These methods must be of high order to limit the presence of spurious flows (which contradict the establishment of a physical equilibrium) and to verify energy conservation properties. Several solutions are proposed which seem to fulfill these expectations. A reformulation of the six-equation system adapted to low Mach two-phase flows has been also proposed. These methods have been implemented into the Trio-U code of CEA Grenoble, but have been tested only on simple 'academic' configurations. (J.S.)

  17. Kinetic-theory predictions of clustering instabilities in granular flows: beyond the small-Knudsen-number regime

    Energy Technology Data Exchange (ETDEWEB)

    Mitrano, Peter P.; Zenk, John R.; Benyahia, Sofiane; Galvin, Janine E.; Dahl, Steven R.; Hrenya, Christine M.

    2013-12-04

    In this work we quantitatively assess, via instabilities, a Navier–Stokes-order (small- Knudsen-number) continuum model based on the kinetic theory analogy and applied to inelastic spheres in a homogeneous cooling system. Dissipative collisions are known to give rise to instabilities, namely velocity vortices and particle clusters, for sufficiently large domains. We compare predictions for the critical length scales required for particle clustering obtained from transient simulations using the continuum model with molecular dynamics (MD) simulations. The agreement between continuum simulations and MD simulations is excellent, particularly given the presence of well-developed velocity vortices at the onset of clustering. More specifically, spatial mapping of the local velocity-field Knudsen numbers (Knu) at the time of cluster detection reveals Knu » 1 due to the presence of large velocity gradients associated with vortices. Although kinetic-theory-based continuum models are based on a small- Kn (i.e. small-gradient) assumption, our findings suggest that, similar to molecular gases, Navier–Stokes-order (small-Kn) theories are surprisingly accurate outside their expected range of validity.

  18. A Statistical Test for Identifying the Number of Creep Regimes When Using the Wilshire Equations for Creep Property Predictions

    Science.gov (United States)

    Evans, Mark

    2016-12-01

    A new parametric approach, termed the Wilshire equations, offers the realistic potential of being able to accurately lift materials operating at in-service conditions from accelerated test results lasting no more than 5000 hours. The success of this approach can be attributed to a well-defined linear relationship that appears to exist between various creep properties and a log transformation of the normalized stress. However, these linear trends are subject to discontinuities, the number of which appears to differ from material to material. These discontinuities have until now been (1) treated as abrupt in nature and (2) identified by eye from an inspection of simple graphical plots of the data. This article puts forward a statistical test for determining the correct number of discontinuities present within a creep data set and a method for allowing these discontinuities to occur more gradually, so that the methodology is more in line with the accepted view as to how creep mechanisms evolve with changing test conditions. These two developments are fully illustrated using creep data sets on two steel alloys. When these new procedures are applied to these steel alloys, not only do they produce more accurate and realistic looking long-term predictions of the minimum creep rate, but they also lead to different conclusions about the mechanisms determining the rates of creep from those originally put forward by Wilshire.

  19. Aerosol and NOx emission factors and submicron particle number size distributions in two road tunnels with different traffic regimes

    Directory of Open Access Journals (Sweden)

    D. Imhof

    2006-01-01

    Full Text Available Measurements of aerosol particle number size distributions (18–700 nm, mass concentrations (PM2.5 and PM10 and NOx were performed in the Plabutsch tunnel, Austria, and in the Kingsway tunnel, United Kingdom. These two tunnels show different characteristics regarding the roadway gradient, the composition of the vehicle fleet and the traffic frequency. The submicron particle size distributions contained a soot mode in the diameter range D=80–100 nm and a nucleation mode in the range of D=20–40 nm. In the Kingsway tunnel with a significantly lower particle number and volume concentration level than in the Plabutsch tunnel, a clear diurnal variation of nucleation and soot mode particles correlated to the traffic density was observed. In the Plabutsch tunnel, soot mode particles also revealed a diurnal variation, whereas no substantial variation was found for the nucleation mode particles. During the night a higher number concentration of nucleation mode particles were measured than soot mode particles and vice versa during the day. In this tunnel with very high soot emissions during daytime due to the heavy-duty vehicle (HDV share of 18% and another 40% of diesel driven light-duty vehicles (LDV semivolatile species condense on the pre-existing soot surface area rather than forming new particles by homogeneous nucleation. With the low concentration of soot mode particles in the Kingsway tunnel, also the nucleation mode particles exhibit a diurnal variation. From the measured parameters real-world traffic emission factors were estimated for the whole vehicle fleet as well as differentiated into the two categories LDV and HDV. In the particle size range D=18–700 nm, each vehicle of the mixed fleet emits (1.50±0.08×1014 particles km-1 (Plabutsch and (1.26±0.10×1014 particles km-1 (Kingsway, while particle volume emission factors of 0.209±0.008 cm3 km-1 and 0.036±0.004 cm3 km-1, respectively, were obtained. PM1 emission factors of 104±4 mg

  20. A Priori Assessment of Algebraic Flame Surface Density Models in the Context of Large Eddy Simulation for Nonunity Lewis Number Flames in the Thin Reaction Zones Regime

    Directory of Open Access Journals (Sweden)

    Mohit Katragadda

    2012-01-01

    Full Text Available The performance of algebraic flame surface density (FSD models has been assessed for flames with nonunity Lewis number (Le in the thin reaction zones regime, using a direct numerical simulation (DNS database of freely propagating turbulent premixed flames with Le ranging from 0.34 to 1.2. The focus is on algebraic FSD models based on a power-law approach, and the effects of Lewis number on the fractal dimension D and inner cut-off scale ηi have been studied in detail. It has been found that D is strongly affected by Lewis number and increases significantly with decreasing Le. By contrast, ηi remains close to the laminar flame thermal thickness for all values of Le considered here. A parameterisation of D is proposed such that the effects of Lewis number are explicitly accounted for. The new parameterisation is used to propose a new algebraic model for FSD. The performance of the new model is assessed with respect to results for the generalised FSD obtained from explicitly LES-filtered DNS data. It has been found that the performance of the most existing models deteriorates with decreasing Lewis number, while the newly proposed model is found to perform as well or better than the most existing algebraic models for FSD.

  1. Investigation of the Static Longitudinal and Lateral Stability Characteristics of a 0.10-Scale Model of a Three-Stage Configuration of the Scout Research Vehicle at Mach Numbers of 2.29, 2.96, 3.96, and 4.65

    Science.gov (United States)

    Jernell, Lloyd S.

    1961-01-01

    An investigation w a s made i n the Langley Unitary Plan wind tunnel o determine the effects of fin area and the effects of antennas and w iring tunnels on the static longitudinal and lateral stability of a 0 .10- scale model of a three- stage configuration of the Scout vehicle. The tests were performed at Mach numbers of 2.29, 2.96, 3.96, and 4. 65 6 and at Reynolds numbers of about 3.5 X 10 per foot.

  2. Slow light Mach-Zehnder fiber interferometer

    Institute of Scientific and Technical Information of China (English)

    Yundong Zhang; Jinfang Wang; Xuenan Zhang; Hao Wu; Yuanxue Cai; Jing Zhang; Ping Yuan

    2012-01-01

    A slow light structure Mach-Zehnder fiber interferometer is theoretically demonstrated.The sensitivity of the interferometer is significantly enhanced by the dispersion of the slow light structure.The numerical results show that the sensitivity enhancement factor varies with the coupling coefficient and reaches its maximum under critical coupling conditions.Interferometers have been investigated in relation to their applications in fields such as metrology[1],optical sensing[2],optical communication[3,4],quantum information processing[5],and biomedical engineering[6].A number of schemes have been proposed to improve the performance of interferometers[7],such as using photonic crystal structures to minimize the size of on-chip devices[8],utilizing the dispersive property of semiconductor to enhance the spectral sensitivity of interferometers[9,10],utilizing slow light medium to enhance the resolution of Fourier transform interferometer[11],exploiting fast light medium or slow light structure to increase the rotation sensitivity of a Sagnac interferometer[12,13],enhancing the transmittance of the Mach-Zehnder interferometer (MZI) in the slow light region by gratings[14],and using liquid crystal light valve to derive high sensitivity interferometers[15].%A slow light structure Mach-Zehnder fiber interferometer is theoretically demonstrated. The sensitivity of the interferometer is significantly enhanced by the dispersion of the slow light structure. The numerical results show that the sensitivity enhancement factor varies with the coupling coefficient and reaches its maximum under critical coupling conditions.

  3. High-resolution flow field measurements in the rotor passage of a low-mach number turbine for different tip geometries; Hochaufgeloeste Stroemungsfeldvermessungen in der Rotorpassage einer Niedermachzahlturbine fuer verschiedene Schaufelspitzengeometrien

    Energy Technology Data Exchange (ETDEWEB)

    Kegalj, Martin

    2013-11-01

    In axial turbines tip leakage forms a large portion of the overall losses. Applying a shroud is very aerodynamically useful, but the higher mechanical loads of the revolving rotor blading exposed to a high thermal load and the higher costs suggest a shroudless configuration is better. The main parameter in the tip leakage loss is the tip gap height, which cannot be reduced arbitrarily as a running gap is necessary due to thermal expansion and vibration of the jet engine. The pressure ratio between pressure and suction of the rotor blade forces the fluid over the blade tip and leads to the formation of the tip leakage vortex. Reduced turning and losses caused by vortices and subsequent mixing are responsible for the reduced efficiency. Using a squealer cavity on the flat blade tip is a feasible way to reduce the aerodynamic losses. A portion of the kinetic energy of the tip leakage flow is dissipated while entering the cavity; the flow exiting the cavity enters the passage with reduced momentum and reduced tip gap mass flow. A 1(1)/(2) stage low mach number turbine was used to investigate the influence of tip geometry. Aerodynamic measurements, performed with five-hole probes, two-component hot-wire anemometer, unsteady wall pressure sensors, stereo and borescopic particle-image-velocimetry setups and oil and dye flow visualization, found small differences in the flow velocities and angles between the flat and squealer tip configuration in the measurement planes downstream of the rotor. The measurement uncertainty proves the difficulty of determining the influence of the squealer cavity on the blade row outflow with global measurement data. To gather information on the flow close to the casing inside the rotor passage is only possible with non-intrusive laser measurement techniques. Comparison of the different tip geometries is still difficult due to the small differences in the absolute flow data. The use of the {lambda}{sub 2} vortex criterion enables an objective

  4. Upper wing surface boundary layer measurements and static aerodynamic data obtained on a 0.015-scale model (42-0) or the SSV orbiter configuration 140A/B in the LTV HSWT at a Mach number of 4.6 (LA58)

    Science.gov (United States)

    Ball, J. W.; Lindahl, R. H.

    1976-01-01

    The purpose of the test was to investigate the nature of the Orbiter boundary layer characteristics at angles of attack from -4 to 32 degrees at a Mach number of 4.6. The effect of large grit, employed as transition strips, on both the nature of the boundary layer and the force and moment characteristics were investigated along with the effects of large negative elevon deflection on lee side separation. In addition, laminar and turbulent boundary layer separation phenomena which could cause asymmetric flow separation were investigated.

  5. Effect of different flow regimes on free convection heat transfer from isothermal convex bodies over all range of Rayleigh and Prandtl numbers

    Science.gov (United States)

    Arabi, Pouria; Jafarpur, Khosrow

    2016-08-01

    In the present study, effect of different flow regimes on free convection heat transfer has been examined. In the light of this, a novel analytical method is developed to calculate free convection heat transfer from isothermal convex bodies with arbitrary shape over all range of Rayleigh number in fluids with any Prandtl number. The crux of this method is based on the concept of dynamic behaviors existing in natural convection flow. In the previous models the Body Gravity Function (BGF) and Turbulent Function (TF) have been taken as constant values. In this study, BGF accounts for the effect of body shape and orientation with respect to gravity vector in laminar free convection. Besides, TF accounts for the impact of Prandtl number, body shape and orientation with regard to gravity vector in turbulent free convection. By contrast, it is shown that these two parameters undergo a change through the variation of Rayleigh number and cannot be considered as a constant. These two parameters are modeled based upon the thermal resistance concept. Moreover, two transition criteria happening in free convection heat transfer will be obtained according to this new analytical method (conduction-laminar and laminar-turbulent transitions). Finally, three models (models 1, 2 and 3) are proposed for calculation free convection heat transfer and present results for ten isothermal convex bodies with various aspect ratios (0.298 ≤ √ A /P ≤ 2.470) have been compared with the available experimental and numerical data. Here, the results of model 2 are almost equal to those of model 3. Also, the results of model 1 are more precise than those of model 3 while the parameters computation of model 1 is more intricate in comparison with model 3. On the one hand, the model 1 has an average difference <6 % vis-à-vis numerical data in entire range of Rayleigh number (laminar and turbulent). On the other hand, the average difference of model 1 is not more than 8 % versus experimental data

  6. Compressible Relativistic Magnetohydrodynamic Turbulence in Magnetically-Dominated Plasmas And Implications for A New Regime

    CERN Document Server

    Takamoto, Makoto

    2016-01-01

    In this Letter, we report compressible mode effects on relativistic magnetohydrodynamic (RMHD) turbulence in Poynting-dominated plasmas using 3-dimensional numerical simulations. We decomposed fluctuations in the turbulence into 3 MHD modes (fast, slow, and Alfv\\'en) following the procedure mode decomposition in (Cho & Lazarian 2002), and analyzed their energy spectra and structure functions separately. We also analyzed the ratio of compressible mode to Alfv\\'en mode energy with respect to its Mach number. We found the ratio of compressible mode increases not only with the Alfv\\'en Mach number but with the background magnetization, which indicates a strong coupling between the fast and Alfv\\'en modes and appearance of a new regime of RMHD turbulence in Poynting-dominated plasmas where the fast and Alfv\\'en modes strongly couples and cannot be distinguished, different from the non-relativistic MHD case. This finding will affect particle acceleration efficiency obtained by assuming Alfv\\'enic critical balan...

  7. Space shuttle orbiter trimmed center-of-gravity extension study. Volume 5: Effects of configuration modifications on the aerodynamic characteristics of the 140A/B orbiter at Mach numbers of 2.5, 3.95 and 4.6

    Science.gov (United States)

    Phillips, W. P.; Fournier, R. H.

    1979-01-01

    Supersonic aerodynamic characteristics are presented for the 140A/B space shuttle orbiter configuration (0.010 scale) and for the configuration modified to incorporate geometry changes in the wing planform fillet region. The modifications designed to extend the orbiter's longitudinal trim capability to more forward center-of-gravity locations, included reshaping of the baseline wing planform fillet and adding canards. The investigation was made in the high Mach number test section of the Langley Unitary Plan Wind Tunnel at a Reynolds number of approximately 2.2 million based on fuselage reference length. The angle-of-attack range for the investigation extended from -1 deg to 31 deg. Data were obtained with the elevators and body flap deflected at appropriate negative and positive conditions to assess the trim limits.

  8. Macroeconomic regimes

    NARCIS (Netherlands)

    Baele, L.T.M.; Bekaert, G.R.J.; Cho, S.; Inghelbrecht, K.; Moreno, A.

    2015-01-01

    A New-Keynesian macro-model is estimated accommodating regime-switching behavior in monetary policy and macro-shocks. A key to our estimation strategy is the use of survey-based expectations for inflation and output. Output and inflation shocks shift to the low volatility regime around 1985 and 1990

  9. Gravity-driven soap film dynamics in subcritical regimes

    Science.gov (United States)

    Auliel, M. I.; Castro, F.; Sosa, R.; Artana, G.

    2015-10-01

    We undertake the analysis of soap-film dynamics with the classical approach of asymptotic expansions. We focus our analysis in vertical soap film tunnels operating in subcritical regimes with elastic Mach numbers Me=O(10-1) . Considering the associated set of nondimensional numbers that characterize this flow, we show that the flow behaves as a two-dimensional (2D) divergence free flow with variable mass density. When the soap film dynamics agrees with that of a 2D and almost constant mass density flow, the regions where the second invariant of the velocity gradient is non-null correspond to regions where the rate of change of film thickness is non-negligible.

  10. MACH: Fast Randomized Tensor Decompositions

    CERN Document Server

    Tsourakakis, Charalampos E

    2009-01-01

    Tensors naturally model many real world processes which generate multi-aspect data. Such processes appear in many different research disciplines, e.g, chemometrics, computer vision, psychometrics and neuroimaging analysis. Tensor decompositions such as the Tucker decomposition are used to analyze multi-aspect data and extract latent factors, which capture the multilinear data structure. Such decompositions are powerful mining tools, for extracting patterns from large data volumes. However, most frequently used algorithms for such decompositions involve the computationally expensive Singular Value Decomposition. In this paper we propose MACH, a new sampling algorithm to compute such decompositions. Our method is of significant practical value for tensor streams, such as environmental monitoring systems, IP traffic matrices over time, where large amounts of data are accumulated and the analysis is computationally intensive but also in "post-mortem" data analysis cases where the tensor does not fit in the availa...

  11. Wind-tunnel force and flow visualization data at Mach numbers from 1.6 to 4.63 for a series of bodies of revolution at angles of attack from minus 4 deg to 60 deg

    Science.gov (United States)

    Landrum, E. J.; Babb, C. D.

    1979-01-01

    Flow visualization and force data for a series of six bodies of revolution are presented without analysis. The data were obtained in the Langley Unitary Plan wind tunnel for angles of attack from -4 deg to 60 deg. The Reynolds number used for these tests was 6,600,000 per meter.

  12. Turbulent magnetic field amplification from the smallest to the largest magnetic Prandtl numbers

    CERN Document Server

    Bovino, Stefano; Schober, Jennifer

    2012-01-01

    The small-scale dynamo provides a highly efficient mechanism for the conversion of turbulent into magnetic energy. In astrophysical environments, such turbulence often occurs at high Mach numbers, implying steep slopes in the turbulent spectra. It is thus a central question whether the small-scale dynamo can amplify magnetic fields in the interstellar or intergalactic media, where such Mach numbers occur. To address this long-standing issue, we employ the Kazantsev model for turbulent magnetic field amplification, systematically exploring the effect of different turbulent slopes, as expected for Kolmogorov, Burgers, the Larson laws and results derived from numerical simulations. With the framework employed here, we give the first solution encompassing the complete range of magnetic Prandtl numbers, including Pm > 1. We derive scaling laws of the growth rate as a function of hydrodynamic and magnetic Reynolds number for Pm > 1 for all types of turbulence. A central result concerns the regime of Pm ~ 1, where t...

  13. Mach stem formation in reflection and focusing of weak shock acoustic pulses.

    Science.gov (United States)

    Karzova, Maria M; Khokhlova, Vera A; Salze, Edouard; Ollivier, Sébastien; Blanc-Benon, Philippe

    2015-06-01

    The aim of this study is to show the evidence of Mach stem formation for very weak shock waves with acoustic Mach numbers on the order of 10(-3) to 10(-2). Two representative cases are considered: reflection of shock pulses from a rigid surface and focusing of nonlinear acoustic beams. Reflection experiments are performed in air using spark-generated shock pulses. Shock fronts are visualized using a schlieren system. Both regular and irregular types of reflection are observed. Numerical simulations are performed to demonstrate the Mach stem formation in the focal region of periodic and pulsed nonlinear beams in water.

  14. Laser frequency stabilisation via quasi-monolithic, unequal arm-length Mach-Zehnder interferometer with balanced DC readout

    CERN Document Server

    Gerberding, Oliver; Mehmet, Moritz; Danzmann, Karsten; Heinzel, Gerhard

    2016-01-01

    Low frequency high precision laser interferometry is subject to excess laser frequency noise coupling via arm-length differences which is commonly mitigated by locking the frequency to a stable reference system. This is crucial to achieve picometer level sensitivities in the 0.1 mHz to 1 Hz regime, where laser frequency noise is usually high and couples into the measurement phase via arm-length mismatches in the interferometers. Here we describe the results achieved by frequency stabilising an external cavity diode laser to a quasi-monolithic unequal arm-length Mach-Zehnder interferometer read out at mid-fringe via balanced detection. This stabilisation scheme has been found to be an elegant solution combining a minimal number of optical components, no additional laser modulations and relatively low frequency noise levels. The Mach-Zehnder interferometer has been designed and constructed to minimise the influence of thermal couplings and to reduce undesired stray light using the optical simulation tool IfoCAD...

  15. Consistent lattice Boltzmann modeling of low-speed isothermal flows at finite Knudsen numbers in slip-flow regime: Application to plane boundaries

    Science.gov (United States)

    Silva, Goncalo; Semiao, Viriato

    2017-07-01

    The first nonequilibrium effect experienced by gaseous flows in contact with solid surfaces is the slip-flow regime. While the classical hydrodynamic description holds valid in bulk, at boundaries the fluid-wall interactions must consider slip. In comparison to the standard no-slip Dirichlet condition, the case of slip formulates as a Robin-type condition for the fluid tangential velocity. This makes its numerical modeling a challenging task, particularly in complex geometries. In this work, this issue is handled with the lattice Boltzmann method (LBM), motivated by the similarities between the closure relations of the reflection-type boundary schemes equipping the LBM equation and the slip velocity condition established by slip-flow theory. Based on this analogy, we derive, as central result, the structure of the LBM boundary closure relation that is consistent with the second-order slip velocity condition, applicable to planar walls. Subsequently, three tasks are performed. First, we clarify the limitations of existing slip velocity LBM schemes, based on discrete analogs of kinetic theory fluid-wall interaction models. Second, we present improved slip velocity LBM boundary schemes, constructed directly at discrete level, by extending the multireflection framework to the slip-flow regime. Here, two classes of slip velocity LBM boundary schemes are considered: (i) linear slip schemes, which are local but retain some calibration requirements and/or operation limitations, (ii) parabolic slip schemes, which use a two-point implementation but guarantee the consistent prescription of the intended slip velocity condition, at arbitrary plane wall discretizations, further dispensing any numerical calibration procedure. Third and final, we verify the improvements of our proposed slip velocity LBM boundary schemes against existing ones. The numerical tests evaluate the ability of the slip schemes to exactly accommodate the steady Poiseuille channel flow solution, over

  16. Aerodynamic Loads at Mach Numbers from 0.70 to 2.22 on an Airplane Model Having a Wing and Canard of Triangular Plan Form and Either Single or Twin Vertical Tails. Supplement 2; Tabulated Data for the Model with Twin Vertical Tails

    Science.gov (United States)

    Peterson, Victor L.; Menees, Gene P.

    1961-01-01

    Tabulated results of a wind-tunnel investigation of the aerodynamic loads on a canard airplane model with twin vertical tails are presented for Mach numbers from 0.70 to 2.22. The Reynolds number for the measurements was 2.9 x 10(exp 6) based on the wing mean aerodynamic chord. The results include local static-pressure coefficients measured on the wing, body, and one of the vertical tails for angles of attack from -4 degrees to 16 degree angles of sideslip of 0 degrees and 5.3 degrees, and nominal canard deflections of O degrees and 10 degrees. Also included are section force and moment coefficients obtained from integrations of the local pressures and model-component force and moment coefficients obtained from integrations of the section coefficients. Geometric details of the model are shown and the locations of the pressure orifices are shown. An index to the data contained herein is presented and definitions of nomenclature are given. Detailed descriptions of the model and experiments and a brief discussion of some of the results are given. Tabulated results of measurements of the aerodynamic loads on the same canard model but having a single vertical tail instead of twin vertical tails are presented.

  17. Aerodynamic Loads at Mach Numbers from 0.70 to 2.22 on an Airplane Model Having a Wing and Canard of Triangular Plan Form and Either Single or Twin Vertical Tails Supplement I-Tabulated Data for the Model with Single Vertical Tails. Supplement 1; Tabulated Data for the Model with Single Vertical Tail

    Science.gov (United States)

    Peterson, Victor L.; Menees, Gene P.

    1961-01-01

    Tabulated results of a wind-tunnel investigation of the aerodynamic loads on a canard airplane model with a single vertical tail are presented for Mach numbers from 0.70 to 2.22. The Reynolds number for the measurements was 2.9 x 10(exp 6) based on the wing mean aerodynamic chord. The results include local static pressure coefficients measured on the wing, body, and vertical tail for angles of attack from -4 deg to + 16 deg, angles of sideslip of 0 deg and 5.3 deg, vertical-tail settings of 0 deg and 5 deg, and nominal canard deflections of 0 deg and 10 deg. Also included are section force and moment coefficients obtained from integrations of the local pressures and model-component force and moment coefficients obtained from integrations of the section coefficients. Geometric details of the model and the locations of the pressure orifices are shown. An index to the data contained herein is presented and definitions of nomenclature are given.

  18. Interplay between Mach cone and radial expansion in jet events

    Science.gov (United States)

    Tachibana, Y.; Hirano, T.

    2016-12-01

    We study the hydrodynamic response to jet propagation in the expanding QGP and investigate how the particle spectra after the hydrodynamic evolution of the QGP reflect it. We perform simulations of the space-time evolution of the QGP in gamma-jet events by solving (3+1)-dimensional ideal hydrodynamic equations with source terms. Mach cone is induced by the jet energy deposition and pushes back the radial flow of the expanding background. Especially in the case when the jet passage is off-central one, the number of particles emitted in the direction of the push back decreases. This is the signal including the information about the formation of the Mach cone and the jet passage in the QGP fluid.

  19. Mach, the Universe, and Foundations of Mechanics

    CERN Document Server

    Mashhoon, B

    2011-01-01

    Barbour's response to our recent paper on "Mach's principle and higher-dimensional dynamics" describes an approach to Mach's principle in which the universe as a whole is involved in the definition of inertial frames of reference. Moreover, Barbour's theoretical procedure is in agreement with general relativity for a finite universe that is spatially closed. However, we prefer an operational approach that relies ultimately on observational data.

  20. Emergent gravity of fractons: Mach's principle revisited

    Science.gov (United States)

    Pretko, Michael

    2017-07-01

    Recent work has established the existence of stable quantum phases of matter described by symmetric tensor gauge fields, which naturally couple to particles of restricted mobility, such as fractons. We focus on a minimal toy model of a rank 2 tensor gauge field, consisting of fractons coupled to an emergent graviton (massless spin-2 excitation). We show how to reconcile the immobility of fractons with the expected gravitational behavior of the model. First, we reformulate the fracton phenomenon in terms of an emergent center of mass quantum number, and we show how an effective attraction arises from the principles of locality and conservation of center of mass. This interaction between fractons is always attractive and can be recast in geometric language, with a geodesiclike formulation, thereby satisfying the expected properties of a gravitational force. This force will generically be short-ranged, but we discuss how the power-law behavior of Newtonian gravity can arise under certain conditions. We then show that, while an isolated fracton is immobile, fractons are endowed with finite inertia by the presence of a large-scale distribution of other fractons, in a concrete manifestation of Mach's principle. Our formalism provides suggestive hints that matter plays a fundamental role, not only in perturbing, but in creating the background space in which it propagates.

  1. Regimes internacionais

    OpenAIRE

    Meireles, André Bezerra

    2004-01-01

    Dissertação (mestraddo) - Universidade Federal de Santa Catarina, Centro de Ciências Jurídicas. Programa de Pós-Graduação em Direito. Qual o papel dos regimes internacionais com relação ao comportamento dos agentes das relações internacionais contemporâneas, em especial, o Estado? Dentro das negociações de uma esfera internacional caracterizada por uma forte interdependência econômica, verificada a existência de múltiplos canais de conexões entre as sociedades, e uma tendência contínua p...

  2. Fenomenologia e fenomenismo em Husserl e Mach

    Directory of Open Access Journals (Sweden)

    Denis Fisette

    2009-12-01

    Full Text Available Como conciliar as repetidas críticas ao fenomenismo de Mach, um pouco por toda a obra de Husserl, com o papel proeminente que Husserl parece nele reconhecer em seus últimos trabalhos, quanto à gênese de sua própria fenomenologia? Para responder a essa questão, examinaremos, primeiramente, a relação estreita que Husserl estabelece entre o método fenomenológico e o descritivismo de Mach à luz do debate que opõe nativismo e empirismo sobre a origem da percepção do espaço. Em seguida, examinaremos dois aspectos da crítica que Husserl faz ao positivismo de Mach: o primeiro se refere ao fenomenismo e sua doutrina dos elementos, enquanto o segundo, ao princípio de economia de pensamento, que Husserl associa a uma forma de psicologismo em Prolegômenos. A hipótese que nos guiará nesse estudo é que as opiniões aparentemente contraditórias de Husserl sobre o positivismo de Mach se explicam em parte pelo estatuto duplo que a fenomenologia recebe em seus últimos trabalhos: enquanto programa filosófico, ela se opõe explicitamente ao positivismo; enquanto método, ela se aparenta ao descritivismo de Mach. Concluiremos com a ideia de que esses dois filósofos de origem checa perseguiam o objetivo comum de apreender o sentido originário de positividade.How to conciliate the recurrent criticisms to Mach's phenomenism, a bit in all Husserl's work, with the outstanding role Husserl seems to recognise in phenomenism in his last works, as to the genesis of his own phenomenology? In order to answer this question, we examine, first, the close relationship stablished by Husserl between the phenomenological method and Mach's descriptivism in light of the debate that opposes nativism and empiricism regarding the origin of the perception of space. Next, we examine two features of Husserl's criticism to Mach's positivism: the first refers to phenomenism ans its doctrine of elements, and the second, to the principle of economy of thought, which

  3. Numerical Simulation of Shock Bubble Interaction with Different Mach Numbers

    Science.gov (United States)

    Yang, Jie; Wan, Zhen-Hua; Wang, Bo-Fu; Sun, De-Jun

    2015-03-01

    Not Available Supported by the National Natural Science Foundation of China under Grant Nos 11232011 and 11402262, the 111 Project under Grant No B07033, and the China Postdoctoral Science Foundation Funded Project under Grant No 2014M561833.

  4. Experimental Studies of Very-High Mach Number Hydrodynamics

    Science.gov (United States)

    1994-02-14

    intensity of the from Rotman (1991. symbol R) shock amplification of the density fluctuations as a parameter, together with a turbulent kinetic energy...overlapsubgrid scale model while predicting an increase in the model where an algebraic identity provides a procedure for overall grid spectral energy... Rotman , and W. P. improvement in the dissipative near-wal region. Dannevik during the course of this work. Figure 8. indicates that for even steeper

  5. Plasma flow at a high Mach-number

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Bing; Hameiri, Eliezer [Courant Institute of Mathematical Sciences, New York University New York, New York 10012 (United States)

    2013-09-15

    Unlike the case of static magnetohydrodynamic (MHD) equilibria, where an expansion in large aspect ratio of toroidal devices is common, cases of MHD equilibria with flow are rarely treated this way, and when this is done the expansion tends to be only partial. The main reason for the difference seems to be the difficulty of expanding the larger system of equilibrium equations with flow. Here, we use a recent expansion technique which employs a variational principle to simplify the process [E. Hameiri, Phys. Plasmas 20, 024504 (2013)]. We treat four cases of MHD equilibria with flow, developing their asymptotic expansions in full, and for an application consider the effect of the flow on the Shafranov shift.

  6. Hydrocarbon-Fueled Scramjet Research at Hypersonic Mach Numbers

    Science.gov (United States)

    2005-03-31

    hypersonic flow. Laser-induced fluorescence has the threefold advantages for combustion studies of being non- intrusive , species-specific and highly sensitive...Propulsion Conference and Exhibit, Seattle, WA. Griffiths, A. (2004), Development and Demonstration of a Diode Laser Based Temperature and Water Vapour

  7. Investigation on subsonic to supersonic flow around a sphere at low Reynolds number of between 50 and 300 by direct numerical simulation

    Science.gov (United States)

    Nagata, T.; Nonomura, T.; Takahashi, S.; Mizuno, Y.; Fukuda, K.

    2016-05-01

    In this study, analysis of flow properties around a sphere and its aerodynamic coefficients in the high-Mach-and-low-Reynolds-numbers conditions is carried out by direct numerical simulations solving the three-dimensional compressible Navier-Stokes equations. The calculation is performed on a boundary-fitted coordinate system with a high-order scheme of sufficient accuracy. The analysis is conducted by assuming a rigid sphere with a Reynolds number of between 50 and 300, based on the diameter of the sphere and the freestream velocity and a freestream Mach number of between 0.3 and 2.0, together with the adiabatic wall boundary condition. The calculation shows the following yields: (1) unsteady fluctuation of hydrodynamic forces become smaller as the Mach number increases under the same Reynolds number condition, (2) the drag coefficient increases with the Mach number due to an increase in the pressure drag by the shock wave, and (3) an accurate prediction of the drag coefficient in the supersonic regime using traditional models might be difficult.

  8. Mach bands change asymmetrically during solar eclipses.

    Science.gov (United States)

    Ross, John; Diamond, Mark R; Badcock, David R

    2003-01-01

    Observations made during two partial eclipses of the Sun show that the Mach bands on shadows cast by the Sun disappear and reappear asymmetrically as an eclipse progresses. These changes can be explained as due to changes in the shape of the penumbras of shadows as the visible portion of the Sun forms crescents of different orientation.

  9. Edge and divertor plasma measurements with ion sensitive and Mach probes in LHD

    Energy Technology Data Exchange (ETDEWEB)

    Hayashi, Y., E-mail: shihaya_uki884@yahoo.co.jp [Nagano National College of Technology, 716 Tokuma, Nagano 381-8550 (Japan); Ezumi, N. [Nagano National College of Technology, 716 Tokuma, Nagano 381-8550 (Japan); Masuzaki, S.; Tanaka, H.; Kobayashi, M. [National Institute for Fusion Science, 322-6 Oroshi-cho, Toki 509-5292 (Japan); Sawada, K. [Shinshu University, Wakasato, Nagano 380-8553 (Japan); Ohno, N. [Nagoya University, Furo-cho Chikusa-ku, Nagoya 464-8603 (Japan)

    2013-07-15

    Spatial profiles of plasma flow and Mach number in the stochastic magnetic boundary layer as well as ion temperature (T{sub i}) and electron temperature (T{sub e}) in the divertor region in Large Helical Device (LHD) have been studied by a movable multiple functions probe, which consists of Mach probes and an ion sensitive probe. The results of ion saturation current measurements indicated plasma flow direction is alternated in the stochastic magnetic boundary. Mach number profiles for different plasma densities have been evaluated experimentally which compared with 3-D transport code. T{sub i} and T{sub e} in the divertor region measured by the ion sensitive probe decreased with increasing line-averaged density. Although T{sub i} was higher than T{sub e} in the low density plasma, both temperatures became almost the same at higher density.

  10. Mach-Zehnder interferometer for movement monitoring

    Science.gov (United States)

    Vasinek, Vladimir; Cubik, Jakub; Kepak, Stanislav; Doricak, Jan; Latal, Jan; Koudelka, Petr

    2012-06-01

    Fiber optical interferometers belong to highly sensitive equipments that are able to measure slight changes like distortion of shape, temperature and electric field variation and etc. Their great advantage is that they are insensitive on ageing component, from which they are composed of. It is in virtue of herewith, that there are evaluated no changes in optical signal intensity but number interference fringes. To monitor the movement of persons, eventually to analyze the changes in state of motion we developed method based on analysis the dynamic changes in interferometric pattern. We have used Mach- Zehnder interferometer with conventional SM fibers excited with the DFB laser at wavelength of 1550 nm. It was terminated with optical receiver containing InGaAs PIN photodiode. Its output was brought into measuring card module that performs on FFT of the received interferometer signal. The signal rises with the composition of two waves passing through single interferometer arm. The optical fiber SMF 28e in one arm is referential; the second one is positioned on measuring slab at dimensions of 1x2m. A movement of persons around the slab was monitored, signal processed with FFT and frequency spectra were evaluated. They rose owing to dynamic changes of interferometric pattern. The results reflect that the individual subjects passing through slab embody characteristic frequency spectra, which are individual for particular persons. The scope of measuring frequencies proceeded from zero to 10 kHz. It was also displayed in experiments that the experimental subjects, who walked around the slab and at the same time they have had changed their state of motion (knee joint fixation), embodied characteristic changes in their frequency spectra. At experiments the stability of interferometric patterns was evaluated as from time aspects, so from the view of repeated identical experiments. Two kinds of balls (tennis and ping-pong) were used to plot the repeatability measurements and

  11. On Mach's critique of Newton and Copernicus

    CERN Document Server

    Hartman, H I; Hartman, Herbert I.; Nissim-Sabat, Charles

    2003-01-01

    Maintaining the relativity of all motion, especially rotational motion, Mach denied the existence of absolute motion and absolute space. He maintained the equivalence of the Ptolemaic and the Copernican systems and the equivalence of a fixed bucket in a rotating universe with the converse. An analysis of the Foucault pendulum shows that there cannot be a fixed bucket in a rotating universe. Also, Mach's views violate the physics he espoused: non-inertial experiments, e.g. stellar aberration and electromagnetic effects, distinguish between a rotating bucket in a fixed universe and the converse, between the Copernican and the Ptolemaic systems, and establish that one cannot ascribe all observations solely to relative motion between a system and the universe.

  12. A Radical New Mach 7 Engine

    Institute of Scientific and Technical Information of China (English)

    履之

    1994-01-01

    Most engines compress air, add fuel and burn it, and then allow theheated gas to expand, creating power or thrust. A radical aircraft enginedevised by ONERA, France’s equivalent of NASA, does the opposite.The Priam inverse-cycle" engine is designed for hypersonic speedsabove Mach 4 (2, 650 mph). Conventional jets do not work at suchspeeds, because the air becomes so hot when it is rammed into the

  13. Dynamic transition from Mach to regular reflection of shock waves in a steady flow

    CSIR Research Space (South Africa)

    Naidoo, K

    2014-07-01

    Full Text Available decreased with increased rotation speed. The sensitivity of the transition angle to changing the rotation point from the trailing edge to the experimental model pivot point was investigated briefly at a free-stream Mach number of M=2.98 with M(subE)=-0...

  14. Mach's Principle and Higher-Dimensional Dynamics

    CERN Document Server

    Mashhoon, B

    2011-01-01

    We briefly discuss the current status of Mach's principle in general relativity and point out that its last vestige, namely, the gravitomagnetic field associated with rotation, has recently been measured for the earth in the GP-B experiment. Furthermore, in his analysis of the foundations of Newtonian mechanics, Mach provided an operational definition for inertial mass and pointed out that time and space are conceptually distinct from their operational definitions by means of masses. Mach recognized that this circumstance is due to the lack of any a priori connection between the inertial mass of a body and its Newtonian state in space and time. One possible way to improve upon this situation in classical physics is to associate mass with an extra dimension. Indeed, Einstein's theory of gravitation can be locally embedded in a Ricci-flat 5D manifold such that the 4D energy-momentum tensor appears to originate from the existence of the extra dimension. An outline of such a 5D Machian extension of Einstein's gen...

  15. An all-regime Lagrange-Projection like scheme for 2D homogeneous models for two-phase flows on unstructured meshes

    Science.gov (United States)

    Chalons, Christophe; Girardin, Mathieu; Kokh, Samuel

    2017-04-01

    We propose an all regime Lagrange-Projection like numerical scheme for 2D homogeneous models for two-phase flows. By all regime, we mean that the numerical scheme is able to compute accurate approximate solutions with an under-resolved discretization, i.e. a mesh size and time step much bigger than the Mach number M of the mixture. The key idea is to decouple acoustic, transport and phase transition phenomenon using a Lagrange-Projection decomposition in order to treat implicitly (fast) acoustic and phase transition phenomenon and explicitly the (slow) transport phenomena. Then, extending a strategy developed in the case of the usual gas dynamics equations, we alter the numerical flux in the acoustic approximation to obtain a uniform truncation error in terms of M. This modified scheme is conservative and endowed with good stability properties with respect to the positivity of the density and preserving the mass fraction within the interval (0 , 1). Numerical evidences are proposed and show the ability of the scheme to deal with cases where the flow regime may vary from low to high Mach values.

  16. Characteristics of the Mach Disk in the Underexpanded Jet in which the Back Pressure Continuously Changes with Time

    Institute of Scientific and Technical Information of China (English)

    T. Irie; T. Yasunobu; H. Kashimura; T. Setoguchi

    2003-01-01

    When the high-pressure gas is exhausted to the vacuum chamber from the nozzle, the underexpanded supersonic jet contained with the Mach disk is generally formed. The eventual purpose of this study is to clarify the unsteady phenomenon of the underexpanded free jet when the back pressure continuously changes with time. The characteristic of the Mach disk has been clarified in consideration of the diameter and position of it by the numerical analysis in this paper. The sonic jet of the exit Mach number Me=1 is assumed and the axisymmetric conservational equation is solved by the TVD method in the numerical calculation.The diameter and position of the Mach disk differs with the results of a steady jet and the influence on the continuously changing of the back pressure is evidenced from the comparison with the case of steady supersonic jet.

  17. Combustion-Powered Actuation for Dynamic Stall Suppression - Simulations and Low-Mach Experiments

    Science.gov (United States)

    Matalanis, Claude G.; Min, Byung-Young; Bowles, Patrick O.; Jee, Solkeun; Wake, Brian E.; Crittenden, Tom; Woo, George; Glezer, Ari

    2014-01-01

    An investigation on dynamic-stall suppression capabilities of combustion-powered actuation (COMPACT) applied to a tabbed VR-12 airfoil is presented. In the first section, results from computational fluid dynamics (CFD) simulations carried out at Mach numbers from 0.3 to 0.5 are presented. Several geometric parameters are varied including the slot chordwise location and angle. Actuation pulse amplitude, frequency, and timing are also varied. The simulations suggest that cycle-averaged lift increases of approximately 4% and 8% with respect to the baseline airfoil are possible at Mach numbers of 0.4 and 0.3 for deep and near-deep dynamic-stall conditions. In the second section, static-stall results from low-speed wind-tunnel experiments are presented. Low-speed experiments and high-speed CFD suggest that slots oriented tangential to the airfoil surface produce stronger benefits than slots oriented normal to the chordline. Low-speed experiments confirm that chordwise slot locations suitable for Mach 0.3-0.4 stall suppression (based on CFD) will also be effective at lower Mach numbers.

  18. Numerical simulation of Mach reflection of cellular detonations

    Science.gov (United States)

    Li, J.; Lee, J. H. S.

    2016-09-01

    The Mach reflection of cellular detonation waves on a wedge is investigated numerically in an attempt to elucidate the effect of cellular instabilities on Mach reflection, the dependence of self-similarity on the thickness of a detonation wave, and the initial development of the Mach stem near the wedge apex. A two-step chain-branching reaction model is used to give a thermally neutral induction zone followed by a chemical reaction zone for the detonation wave. A sufficiently large distance of travel of the Mach stem is computed to observe the asymptotic behavior in the far field. Depending on the scale at which the Mach reflection process occurs, it is found that the Mach reflection of a cellular detonation behaves essentially in the same way as a planar ZND detonation wave. The cellular instabilities, however, cause the triple-point trajectory to fluctuate. The fluctuations are due to interactions of the triple point of the Mach stem with the transverse waves of cellular instabilities. In the vicinity of the wedge apex, the Mach reflection is found to be self-similar and corresponds to that of a shock wave of the same strength, since the Mach stem is highly overdriven initially. In the far field, the triple-point trajectory approaches a straight line, indicating that the Mach reflection becomes self-similar asymptotically. The distance of the approach to self-similarity is found to decrease rapidly with decreasing thickness of the detonation front.

  19. Terminal area energy management regime investigations utilizing an 0.030-scale model (47-0) of the space shuttle vehicle orbiter configuration 140A/B/C/R in the Ames Research Center 11 x 11 foot transonic wind tunnel (0A148), volume 1

    Science.gov (United States)

    Hawthorne, P. J.

    1976-01-01

    Data obtained in wind tunnel tests are presented. The objectives of the tests were to: (1) obtain pressure distributions, forces and moments over the vehicle 5 Orbiter in the terminal area energy management (TAEM) and approach phases of flight; (2) obtain elevon and rudder hinge moments in the TAEM and approach phases of flight; (3) obtain body flap and elevon loads for verification of loads balancing with integrated pressure distributions; and (4) obtain pressure distributions near the short OMS pods in the high subsonic, transonic and low supersonic Mach number regimes. Testing was conducted over a Mach number range from 0.6 to 1.4 with Reynolds number variations from 4.57 million to 2.74 million per foot. Model angle-of-attack was varied from -4 to 16 degrees and angles of side slip ranged from -8 to 8 degrees.

  20. Terminal area energy management regime investigations utilizing an 0.030-scale model (47-0) of the space shuttle vehicle orbiter configuration 140A/B/C/R in the Ames Research Center 11 x 11 foot transonic wind tunnel (OH/48)

    Science.gov (United States)

    Hawthorne, P. J.

    1976-01-01

    Data obtained in a wind tunnel test were examined to: (1) obtain pressure distributions, forces and moments over the vehicle 5 Orbiter in the terminal area energy management (TAEM) and approach phases of flight; (2) obtain elevon and rudder hinge moments in the TAEM and approach phases of flight; (3) obtain body flap and elevon loads for verification of loads balancing with integrated pressure distributions; and (4) obtain pressure distributions near the short OMS pods in the high subsonic, transonic and low supersonic Mach number regimes. Testing was conducted over a Mach number range from 0.6 to 1.4 with Reynolds number variations from 7.57 x 1 million to 2.74 x 1 million per foot. Model angle of attack was varied from -4 to 16 degrees and angles of sideslip ranged from -8 to 8 degrees.

  1. Study of the Transition Flow Regime using Monte Carlo Methods

    Science.gov (United States)

    Hassan, H. A.

    1999-01-01

    This NASA Cooperative Agreement presents a study of the Transition Flow Regime Using Monte Carlo Methods. The topics included in this final report are: 1) New Direct Simulation Monte Carlo (DSMC) procedures; 2) The DS3W and DS2A Programs; 3) Papers presented; 4) Miscellaneous Applications and Program Modifications; 5) Solution of Transitional Wake Flows at Mach 10; and 6) Turbulence Modeling of Shock-Dominated Fows with a k-Enstrophy Formulation.

  2. Sustainable urban regime adjustments

    DEFF Research Database (Denmark)

    Quitzau, Maj-Britt; Jensen, Jens Stissing; Elle, Morten

    2013-01-01

    The endogenous agency that urban governments increasingly portray by making conscious and planned efforts to adjust the regimes they operate within is currently not well captured in transition studies. There is a need to acknowledge the ambiguity of regime enactment at the urban scale. This directs...... attention to the transformative implications of conscious strategic maneuvering by incumbent regime actors, when confronting regime structurations. This article provides insight to processes of regime enactment performed by local governments by applying a flow-oriented perspective on regime dynamics...

  3. On Mach's principle: Inertia as gravitation

    CERN Document Server

    Martín, J; Tiemblo, A; Ranada, Antonio F.

    2007-01-01

    In order to test the validity of Mach's principle, we calculate the action of the entire universe on a test mass in its rest frame, which is an acceleration ${\\bf g}^*$. We show the dependence of the inertia principle on the lapse and the shift. Using the formalism of linearized gravitation, we obtain the non-relativistic limit of ${\\bf g}^*$ in terms of two integrals. We follow then two approaches. In the first one, these integrals are calculated in the actual time section $t=t_0$ up to the distance $R_U=ct_0$. In the more exact and satisfactory second approach, they are calculated over the past light cone using the formalism of the retarded potentials. The aim is to find whether the acceleration $\\dot{\\bf v}$ in the LHS of Newton's second law can be interpreted as a reactive acceleration, in other words, as minus the acceleration of gravity ${\\bf g}^*$ in the rest frame of the accelerated particle ({\\it i. e.} to know whether or not ${\\bf g}^*=-\\dot{\\bf v}$). The results strongly support Mach's idea since t...

  4. An Investigation of Transonic Resonance in a Mach 2.2 Round Convergent-Divergent Nozzle

    Science.gov (United States)

    Dippold, Vance F., III; Zaman, Khairul B. M. Q.

    2015-01-01

    Hot-wire and acoustic measurements were taken for a round convergent nozzle and a round convergent-divergent (C-D) nozzle at a jet Mach number of 0.61. The C-D nozzle had a design Mach number of 2.2. Compared to the convergent nozzle jet flow, the Mach 2.2 nozzle jet flow produced excess broadband noise (EBBN). It also produced a transonic resonance tone at 1200 Herz. Computational simulations were performed for both nozzle flows. A steady Reynolds-Averaged Navier-Stokes simulation was performed for the convergent nozzle jet flow. For the Mach 2.2 nozzle flow, a steady RANS simulation, an unsteady RANS (URANS) simulation, and an unsteady Detached Eddy Simulation (DES) were performed. The RANS simulation of the convergent nozzle showed good agreement with the hot-wire velocity and turbulence measurements, though the decay of the potential core was over-predicted. The RANS simulation of the Mach 2.2 nozzle showed poor agreement with the experimental data, and more closely resembled an ideally-expanded jet. The URANS simulation also showed qualitative agreement with the hot-wire data, but predicted a transonic resonance at 1145 Herz. The DES showed good agreement with the hot-wire velocity and turbulence data. The DES also produced a transonic tone at 1135 Herz. The DES solution showed that the destabilization of the shock-induced separation region inside the nozzle produced increased levels of turbulence intensity. This is likely the source of the EBBN.

  5. Mach 5 to 7 RBCC Propulsion System Testing at NASA-LeRC HTF

    Science.gov (United States)

    Perkins, H. Douglas; Thomas, Scott R.; Pack, William D.

    1996-01-01

    A series of Mach 5 to 7 freejet tests of a Rocket Based Combined Cycle (RBCC) engine were cnducted at the NASA Lewis Research Center (LERC) Hypersonic Tunnel Facility (HTF). This paper describes the configuration and operation of the HTF and the RBCC engine during these tests. A number of facility support systems are described which were added or modified to enhance the HTF test capability for conducting this experiment. The unfueled aerodynamic perfor- mance of the RBCC engine flowpath is also presented and compared to sub-scale test results previously obtained in the NASA LERC I x I Supersonic Wind Tunnel (SWT) and to Computational Fluid Dynamic (CFD) analysis results. This test program demonstrated a successful configuration of the HTF for facility starting and operation with a generic RBCC type engine and an increased range of facility operating conditions. The ability of sub-scale testing and CFD analysis to predict flowpath performance was also shown. The HTF is a freejet, blowdown propulsion test facility that can simulate up to Mach 7 flight conditions with true air composition. Mach 5, 6, and 7 facility nozzles are available, each with an exit diameter of 42 in. This combination of clean air, large scale, and Mach 7 capabilities is unique to the HTF. This RBCC engine study is the first engine test program conducted at the HTF since 1974.

  6. Integrated parametric study of a hybrid-stabilized argon-water arc under subsonic, transonic and supersonic plasma flow regimes

    Science.gov (United States)

    Jeništa, J.; Takana, H.; Nishiyama, H.; Bartlová, M.; Aubrecht, V.; Křenek, P.; Hrabovský, M.; Kavka, T.; Sember, V.; Mašláni, A.

    2011-11-01

    This paper presents a numerical investigation of characteristics and processes in the worldwide unique type of thermal plasma generator with combined stabilization of arc by argon flow and water vortex, the so-called hybrid-stabilized arc. The arc has been used for spraying of ceramic or metallic particles and for pyrolysis of biomass. The net emission coefficients as well as the partial characteristics methods for radiation losses from the argon-water arc are employed. Calculations for 300-600 A with 22.5-40 standard litres per minute (slm) of argon reveal transition from a transonic plasma flow for 400 A to a supersonic one for 600 A with a maximum Mach number of 1.6 near the exit nozzle of the plasma torch. A comparison with available experimental data near the exit nozzle shows very good agreement for the radial temperature profiles. Radial velocity profiles calculated 2 mm downstream of the nozzle exit show good agreement with the profiles determined from the combination of calculation and experiment (the so-called integrated approach). A recent evaluation of the Mach number from the experimental data for 500 and 600 A confirmed the existence of the supersonic flow regime.

  7. Ernst Mach and the episode of the monocular depth sensations.

    Science.gov (United States)

    Banks, E C

    2001-01-01

    Although Ernst Mach is widely recognized in psychology for his discovery of the effects of lateral inhibition in the retina ("Mach Bands"), his contributions to the theory of depth perception are not as well known. Mach proposed that steady luminance gradients triggered sensations of depth. He also expanded on Ewald Hering's hypothesis of "monocular depth sensations," arguing that they were subject to the same principle of lateral inhibition as light sensations were. Even after Hermann von Helmholtz's attack on Hering in 1866, Mach continued to develop theories involving the monocular depth sensations, proposing an explanation of perspective drawings in which the mutually inhibiting depth sensations scaled to a mean depth. Mach also contemplated a theory of stereopsis in which monocular depth perception played the primary role. Copyright 2001 John Wiley & Sons, Inc.

  8. Distributed optical fiber perturbation sensing system based on Mach-Zehnder interferometer

    Institute of Scientific and Technical Information of China (English)

    Wengang WANG; Deming LIU; Hairong LIU; Qizhen SUN; Zhifeng SUN; Xu ZHANG; Ziheng XU

    2009-01-01

    A novel distributed optical fiber vibration-sensing system based on Mach-Zehnder interferometer has been designed and experimentally demonstrated. Firstly, the principle of Mach-Zehnder optical path interferometer technique is clarified. The output of the Mach-Zehnder interferometer is proportional to the phase shift induced by the perturbation. Secondly, the system consists of the laser diode (LD) as the light source, fiber, Mach-Zehnder optical interferometers as the sensing units, a 1×N star fiber-optic coupler, an N×1 fiber-optic coupler, a photodiode (PD) detector, and a computer used in signal processing. The entire monitoring region of this system is divided into several small zones, and each small monitoring zone is independent from each other. All of the small monitoring zones have their own sensing unit, which is defined by Mach-Zehnder optical interferometer. A series of sensing units are connected by the star fiber-optic couplers to form a whole sensing net. Thirdly, signal-processing techniques are subsequently used to calculate the phase shift to estimate whether intruders appear. The sensing system is able to locate the vibration signal simultaneously, includ-ing multiple vibrations at different positions, by employing the time-division multiplexed (TDM) technique. Finally, the operation performance of the proposed system is tested in the experiment lab with the conditions as follows: the number of the sensing units is 3, the length of the sensing fiber is 50 m, and the wavelength of the light diode is 1550nm. Based on these investigations, the fiber surrounding alert system is achieved. We have experimen-tally demonstrated that the sensing system can measure both the frequency and position of the vibration in real time, with a spatial positional resolution better than 50 m in an area of 1 km2.

  9. Progress in the development of a Mach 5 quiet tunnel

    Science.gov (United States)

    Beckwith, I. E.; Andere, J. B.; Stainback, P. C.; Harvey, W. D.; Srokowski, A. J.

    1977-01-01

    Various techniques to control and reduce radiated noise and the application of these techniques to a 1/2-water Mach 5 quiet tunnel are reviewed. Measurements in a small scale nozzle have shown that the upstream part of the supersonic wall boundary layer could be maintained laminar up to Reynolds numbers of nearly 4 x 1 million based on the test region length upstream of the nozzle exit. Turbulent noise levels in this test region were then reduced by an order of magnitude. To maintain low noise levels at higher Reynolds numbers, laminar flow noise shields are required. Data are presented for shields that consist of small diameter rods alined nearly parallel to the entrance flow with small gaps between the rods for boundary layer suction. Analysis and data presented on the noise shielding and reflection characteristics of flat plates and a rod-wall test panel indicate that freestream turbulent noise can be reduced by 70 to 90 deg at high Reynolds numbers. Performance estimates for the 1/2-meter tunnel are based on these results.

  10. Towards Better Modeling and Simulation of Nonlinear Aeroelasticity On and Beyond Transonic Regimes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The need to accurately predict aeroelastic phenomenon for a wide range of Mach numbers is a critical step in the design process of any aerospace vehicle. Complex...

  11. Aerodynamics characteristic of axisymmetric surface protuberance in supersonic regime

    KAUST Repository

    Qamar, Adnan

    2012-01-01

    The present work deals with the problem of an axi-symmetric surface protuberance mounted on a spherical nosed body of revolution. The numerical computations are carried out for laminar supersonic viscous flow for trapezoidal shape axi-symmetric protuberances. A free stream Mach number ranging from 3 to 8 in steps of 1 at a fixed free stream Reynolds number of 1.8x10(4) has been used in the present study. The steady solutions are obtained using a time marching approach. A newly developed Particle Velocity Upwinding (PVU) scheme has been used for the computation. The spatial flow pattern exhibits a strong bow shock in front of the hemispherical nose, which engulfs the entire base body. Near the protuberance, the fluid particle decelerates due to the adverse pressure created by the protuberance and thus the flow separates in front of the protuberance. This point of separation is found to be a function of Mach number and the protuberance shape. A low-pressure expansion region dominates the base region of the obstacle. The reattachment point for the base separation is also a function of Mach number. As the Mach number is increased the reattachment point shifts toward the protuberances base. A weak recompression shock is also seen in the base, which affects the separated zone behind the protuberance. The important design parameters such as skin friction, heat transfer, drag, and surface pressure coefficients are reported extensively.

  12. Mach band type lateral inhibition in different sense organs.

    Science.gov (United States)

    von Békésy, G

    1967-01-01

    Experiments were done on the skin with shearing forces, vibrations, and heat stimuli and on the tongue with taste stimuli to show that the well known Mach bands are not exclusively a visual phenomenon. On the contrary, it is not difficult to produce areas of a decreased sensation magnitude corresponding to the dark Mach bands in vision. It is shown on a geometrical model of nervous interaction that the appearance of Mach bands for certain patterns of stimulus distribution is correlated with nervous inhibition surrounding the area of sensation. This corroborates the earlier finding that surrounding every area transmitting sensation there is an area simultaneously transmitting inhibition.

  13. The Influence of Ernst Mach in the Teaching of Mechanics

    Science.gov (United States)

    Assis, Andre K. T.; Zylbersztajn, Arden

    We present Newton's main ideas for the formulation of classical mechanics as given in the Principia. Then we discuss Ernst Mach's criticisms of Newtonian mechanics as contained in his book The Science of Mechanics. We analyze the influence of Mach's ideas in the teaching of classical mechanics considering five representative textbooks: those of Kittel, Knight and Ruderman; Marion and Thornton; Symon; Feynman, Leighton and Sands; and Goldstein. We conclude that the influence of Mach's ideas has been very great, being incorporated in the textbooks, although not always with the deserved acknowledgment.

  14. Mach-Zehnder Phasing Sensor for Elts

    Science.gov (United States)

    Dohlen, Kjetil; Montoya-Martinez, Luzma

    Segmented mirror technology has been successfully applied to 10m class telescopes (Keck HET GTC) and its application to future extremely large telescopes (20m NG-CFHT 30m CELT 50m EURO50 100m OWL) is required. Extensive use of adaptive optics in these telescopes puts stringent specifications on wavefront error allowing typically of the order of lambda/20 to segmentation errors. Several phasing metrology schemes adaptable to these giant telescopes are under development. We investigate a novel technique based on the Mach-Zehnder interferometer with a spatial filter in one arm. Atmospheric turbulence is tolerated in this setup if the spatial filter has the size similar to that of the seeing disk. The resulting interference pattern only contains the high-frequency spatial information including information about the piston step height. We describe the theoretical analysis of this system and show simulated and experimatal results. Different error sources are analyzed in order to provide a preliminary idea of the merits of this technique compared with other phasing techniques.

  15. Mach 6 flowfield survey at the engine inlet of a research airplane

    Science.gov (United States)

    Johnson, C. B.; Lawing, P. L.

    1977-01-01

    A flowfield survey was conducted to better define the nature of vehicle forebody flowfield at the inlet location of an airframe-integrated scramjet engine mounted on the lower surface of a high-speed research airplane to be air launched from a B-52 and rocket boosted to Mach 6. The tests were conducted on a 1/30-scale brass model in a Mach-6 20-in. wind tunnel at Reynolds number of 11,200,000 based on distance to engine inlet. Boundary layer profiles at five spanwise locations indicate that the boundary layer in the area of the forebody centerline is more than twice as thick as the boundary layer at three outboard stations. It is shown that the cold streak found in heating contours on the centerline of the forebody is caused by a thickening of the boundary layer on the centerline, and that this thickening decreases with angle of attack.

  16. A fast spatial scanning combination emissive and mach probe for edge plasma diagnosis

    Energy Technology Data Exchange (ETDEWEB)

    Lehmer, R.D.; LaBombard, B.; Conn, R.W.

    1989-04-01

    A fast spatially scanning emissive and mach probe has been developed for the measurement of plasma profiles in the PISCES facility at UCLA. A pneumatic cylinder is used to drive a multiple tip probe along a 15cm stroke in less than 400msec, giving single shot profiles while limiting power deposition to the probe. A differentially pumped sliding O-ring seal allows the probe to be moved between shots to infer two and three dimensional profiles. The probe system has been used to investigate the plasma potential, density, and parallel mach number profiles of the presheath induced by a wall surface and scrape-off-layer profile modifications in biased limiter simulation experiments. Details of the hardware, data acquisition electronics, and tests of probe reliability are discussed. 30 refs., 24 figs.

  17. Krypton tagging velocimetry in a turbulent Mach 2.7 boundary layer

    Science.gov (United States)

    Zahradka, D.; Parziale, N. J.; Smith, M. S.; Marineau, E. C.

    2016-05-01

    The krypton tagging velocimetry (KTV) technique is applied to the turbulent boundary layer on the wall of the "Mach 3 Calibration Tunnel" at Arnold Engineering Development Complex (AEDC) White Oak. Profiles of velocity were measured with KTV and Pitot-pressure probes in the Mach 2.7 turbulent boundary layer comprised of 99 % {N}2/1 % Kr at momentum-thickness Reynolds numbers of {Re}_{\\varTheta }= 800, 1400, and 2400. Agreement between the KTV- and Pitot-derived velocity profiles is excellent. The KTV and Pitot velocity data follow the law of the wall in the logarithmic region with application of the Van Driest I transformation. The velocity data are analyzed in the outer region of the boundary layer with the law of the wake and a velocity-defect law. KTV-derived streamwise velocity fluctuation measurements are reported and are consistent with data from the literature. To enable near-wall measurement with KTV (y/δ ≈ 0.1-0.2), an 800-nm longpass filter was used to block the 760.2-nm read-laser pulse. With the longpass filter, the 819.0-nm emission from the re-excited Kr can be imaged to track the displacement of the metastable tracer without imaging the reflection and scatter from the read-laser off of solid surfaces. To operate the Mach 3 AEDC Calibration Tunnel at several discrete unit Reynolds numbers, a modification was required and is described herein.

  18. Improvement of Flow Quality in NAL Chofu Mach 10 Nozzle

    Science.gov (United States)

    Lacey, John; Inoue, Yasutoshi; Higashida, Akio; Inoue, Manabu; Ishizaka, Kouichi; Korte, John J.

    2002-01-01

    As a result of CFD analysis and remachining of the nozzle, the flow quality of the Mach 10 Hypersonic Wind Tunnel at NAL Chofu, Japan was improved. The subsequent test results validated the CFD analytical predictions by NASA and MHL.

  19. Mach's Principle selects 4 space-time dimensions

    CERN Document Server

    Altshuler, Boris L

    2012-01-01

    Bi-tensor kernel in integral form of Einstein equations realizing Mach's idea of non-existence of empty space-times is taken as an inverse of differential operator ("Mach operator") defined conventionally as a second variation of Einstein's gravity Action over contravariant components of metric tensor. The choice of transverse gauge condition used in this definition does not influence results of the paper since only transverse and traceless tensor modes written on different background space-times are studied. Presence of ghosts among modes of Mach operator invalidates the integral formulation of Einstein equations. And the demand of absence of these ghosts proves to be a selection rule for dimensionality of the background space-time. In particular Mach operator written on De Sitter background or on the background of so called "Einstein Universe" does not possess tensor ghosts only in 4-dimensions. The similar demand gives non-trivial formula for dimensionalities of subspaces of the Freund-Rubin background.

  20. Mach-Zehnder Fiber-Optic Links for ICF Diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Miller, E. K., Hermann, H. W.

    2012-11-01

    This article describes the operation and evolution of Mach-Zehnder links for single-point detectors in inertial confinement fusion experimental facilities, based on the Gamma Reaction History (GRH) diagnostic at the National Ignition Facility.

  1. Improvement of Flow Quality in NAL Chofu Mach 10 Nozzle

    Science.gov (United States)

    Lacey, John; Inoue, Yasutoshi; Higashida, Akio; Inoue, Manabu; Ishizaka, Kouichi; Korte, John J.

    2002-01-01

    As a result of CFD analysis and remachining of the nozzle, the flow quality of the Mach 10 Hypersonic Wind Tunnel at NAL Chofu, Japan was improved. The subsequent test results validated the CFD analytical predictions by NASA and MHL.

  2. Transition boundary between regular and Mach reflections for a moving shock interacting with a wedge in inviscid and polytropic air

    Science.gov (United States)

    Hryniewicki, M. K.; Gottlieb, J. J.; Groth, C. P. T.

    2017-07-01

    The transition boundary separating the region of regular reflection from the regions of single-, transitional-, and double-Mach reflections for a planar shock wave moving in air and interacting with an inclined wedge in a shock tube is studied by both analytical methods and computational-fluid-dynamic simulations. The analytical solution for regular reflection and the corresponding solutions from the extreme-angle (detachment), sonic, and mechanical-equilibrium transition criteria by von Neumann (Oblique reflection of shocks, Explosive Research Report No. 12, Navy Department, Bureau of Ordnance, U.S. Dept. Comm. Tech. Serv. No. PB37079 (1943). Also, John von Neumann, Collected Works, Pergamon Press 6, 238-299, 1963) are first revisited and revised. The boundary between regular and Mach reflection is then determined numerically using an advanced computational-fluid-dynamics algorithm to solve Euler's inviscid equations for unsteady motion in two spatial dimensions. This numerical transition boundary is determined by post-processing many closely stationed flow-field simulations, to determine the transition point when the Mach stem of the Mach-reflection pattern just disappears and this pattern then transcends into that of regular reflection. The new numerical transition boundary is shown to agree well with von Neumann's closely spaced sonic and extreme-angle boundaries for weak incident shock Mach numbers from 1.0 to 1.6, but this new boundary trends upward and above von Neumann's sonic and extreme-angle boundaries by a couple of degrees at larger shock Mach numbers from 1.6 to 4.0. Furthermore, the new numerically determined transition boundary is shown to agree well with very few available experimental data obtained from previous experiments designed to reflect two symmetrical moving oblique shock waves along a plane without a shear or boundary layer.

  3. Transition boundary between regular and Mach reflections for a moving shock interacting with a wedge in inviscid and polytropic air

    Science.gov (United States)

    Hryniewicki, M. K.; Gottlieb, J. J.; Groth, C. P. T.

    2016-12-01

    The transition boundary separating the region of regular reflection from the regions of single-, transitional-, and double-Mach reflections for a planar shock wave moving in air and interacting with an inclined wedge in a shock tube is studied by both analytical methods and computational-fluid-dynamic simulations. The analytical solution for regular reflection and the corresponding solutions from the extreme-angle (detachment), sonic, and mechanical-equilibrium transition criteria by von Neumann (Oblique reflection of shocks, Explosive Research Report No. 12, Navy Department, Bureau of Ordnance, U.S. Dept. Comm. Tech. Serv. No. PB37079 (1943). Also, John von Neumann, Collected Works, Pergamon Press 6, 238-299, 1963) are first revisited and revised. The boundary between regular and Mach reflection is then determined numerically using an advanced computational-fluid-dynamics algorithm to solve Euler's inviscid equations for unsteady motion in two spatial dimensions. This numerical transition boundary is determined by post-processing many closely stationed flow-field simulations, to determine the transition point when the Mach stem of the Mach-reflection pattern just disappears and this pattern then transcends into that of regular reflection. The new numerical transition boundary is shown to agree well with von Neumann's closely spaced sonic and extreme-angle boundaries for weak incident shock Mach numbers from 1.0 to 1.6, but this new boundary trends upward and above von Neumann's sonic and extreme-angle boundaries by a couple of degrees at larger shock Mach numbers from 1.6 to 4.0. Furthermore, the new numerically determined transition boundary is shown to agree well with very few available experimental data obtained from previous experiments designed to reflect two symmetrical moving oblique shock waves along a plane without a shear or boundary layer.

  4. Numerical simulations of Mach stem formation via intersecting bow shocks

    Science.gov (United States)

    Hansen, E. C.; Frank, A.; Hartigan, P.; Yirak, K.

    2015-12-01

    Hubble Space Telescope observations show bright knots of Hα emission within outflowing young stellar jets. Velocity variations in the flow create secondary bow shocks that may intersect and lead to enhanced emission. When the bow shocks intersect at or above a certain critical angle, a planar shock called a Mach stem is formed. These shocks could produce brighter Hα emission since the incoming flow to the Mach stem is parallel to the shock normal. In this paper we report first results of a study using 2-D numerical simulations designed to explore Mach stem formation at the intersection of bow shocks formed by hypersonic "bullets" or "clumps". Our 2-D simulations show how the bow shock shapes and intersection angles change as the adiabatic index γ changes. We show that the formation or lack of a Mach stem in our simulations is consistent with the steady-state Mach stem formation theory. Our ultimate goal, which is part of an ongoing research effort, is to characterize the physical and observational consequences of bow shock intersections including the formation of Mach stems.

  5. 3D shock-bubble interactions at Mach 3

    CERN Document Server

    Hejazialhosseini, Babak; Koumoutsakos, Petros

    2012-01-01

    We present a simulation for the interactions of shockwaves with light spherical density inhomogeneities. Euler equations for two-phase compressible flows are solved in a 3D uniform resolution finite volume based solver using 5th order WENO reconstructions of the primitive quantities, HLL-type numerical fluxes and 3rd order TVD time stepping scheme. In this study, a normal Mach 3 shockwave in air is directed at a helium bubble with an interface Atwood number of -0.76. We employ 4 billion cells on a supercomputing cluster and demonstrate the development of this flow until relatively late times. Shock passage compresses the bubble and deposits baroclinic vorticity on the interface. Initial distribution of the vorticity and compressions lead to the formation of an air jet, interface roll-ups and the formation of a long lasting vortical core, the white core. Compressed upstream of the bubble turns into a mixing zone and as the vortex ring distances from this mixing zone, a plume-shaped region is formed and sustain...

  6. Integrated Mach-Zehnder interferometer for Bose-Einstein condensates.

    Science.gov (United States)

    Berrada, T; van Frank, S; Bücker, R; Schumm, T; Schaff, J-F; Schmiedmayer, J

    2013-01-01

    Particle-wave duality enables the construction of interferometers for matter waves, which complement optical interferometers in precision measurement devices. This requires the development of atom-optics analogues to beam splitters, phase shifters and recombiners. Integrating these elements into a single device has been a long-standing goal. Here we demonstrate a full Mach-Zehnder sequence with trapped Bose-Einstein condensates confined on an atom chip. Particle interactions in our Bose-Einstein condensate matter waves lead to a nonlinearity, absent in photon optics. We exploit it to generate a non-classical state having reduced number fluctuations inside the interferometer. Making use of spatially separated wave packets, a controlled phase shift is applied and read out by a non-adiabatic matter-wave recombiner. We demonstrate coherence times a factor of three beyond what is expected for coherent states, highlighting the potential of entanglement as a resource for metrology. Our results pave the way for integrated quantum-enhanced matter-wave sensors.

  7. Measuring autocratic regime stability

    Directory of Open Access Journals (Sweden)

    Joseph Wright

    2016-01-01

    Full Text Available Researchers measure regime stability in autocratic contexts using a variety of data sources that capture distinct concepts. Often this research uses concepts developed for the study of democratic politics, such as leadership change or institutionalized authority, to construct measures of regime breakdown in non-democratic contexts. This article assesses whether the measure a researcher chooses influences the results they obtain by examining data on executive leadership, political authority, and autocratic regimes. We illustrate the conceptual differences between these variables by extending recent studies in the literature on the political consequences of non-tax revenue and unearned foreign income.

  8. Exchange rate regime choice

    Directory of Open Access Journals (Sweden)

    Beker Emilija

    2006-01-01

    Full Text Available The choice of an adequate exchange rate regime proves to be a highly sensitive field within which the economic authorities present and confirm themselves. The advantages and disadvantages of fixed and flexible exchange rate regimes, which have been quite relativized from the conventional point of view, together with simultaneous, but not synchronized effects of structural and external factors, remain permanently questioned throughout a complex process of exchange rate regime decision making. The paper reflects the attempt of critical identification of the key exchange rate performances with emphasis on continuous non-uniformity and (uncertainty of shelf life of a relevant choice.

  9. Terminal area energy management regime investigations utilizing an 0.030-scale model (47-0) of the space shuttle vehicle orbiter configuration 140A/B/C/R in the Ames Research Center 11 x 11 foot transonic wind tunnel (OA148), volume 5

    Science.gov (United States)

    Hawthorne, P. J.

    1976-01-01

    Data obtained in wind tunnel test OA148 are presented. The objectives of the test series were to: (1) obtain pressure distributions, forces and moments over the vehicle 5 orbiter in the thermal area energy management (TAEM) and approach phases of flight; (2) obtain elevon and rudder hinge moments in the TAEM and approach phases of flight; (3) obtain body flap and elevon loads for verification of loads balancing with integrated pressure distributions; and (4) obtain pressure distributions near the short OMS pods in the high subsonic, transonic and low supersonic Mach number regimes.

  10. Numerical Simulations of Mach Stem Formation via Intersecting Bow Shocks

    CERN Document Server

    Hansen, Edward C; Hartigan, Patrick

    2014-01-01

    Hubble Space Telescope observations show bright knots of H$\\alpha$ emission within outflowing young stellar jets. Velocity variations in the flow create secondary bow shocks that may intersect and lead to enhanced emission. When the bow shocks intersect at or above a certain critical angle, a planar shock called a Mach stem is formed. These shocks could produce brighter H$\\alpha$ emission since the incoming flow to the Mach stem is parallel to the shock normal. In this paper we report first results of a study using 2-D numerical simulations designed to explore Mach stem formation at the intersection of bow shocks formed by hypersonic "bullets" or "clumps". Our 2-D simulations show how the bow shock shapes and intersection angles change as the adiabatic index $\\gamma$ changes. We show that the formation or lack of a Mach stem in our simulations is consistent with the steady-state Mach stem formation theory. Our ultimate goal, which is part of an ongoing research effort, is to characterize the physical and obse...

  11. International Experiences with Different Monetary Policy Regimes

    OpenAIRE

    Mishkin, Frederic S.

    1999-01-01

    In recent years a growing consensus has emerged for price stability as the overriding, long-run goal of monetary policy. However, despite this consensus, the following question still remains: how should monetary policy be conducted to achieve the price stability goal? This paper examines the experience with different monetary policy regimes currently in use in a number of countries to shed light on this question. A central feature of all of the monetary regimes discussed here is the ise of a ...

  12. Resolving high Reynolds numbers in SPH simulations of subsonic turbulence

    CERN Document Server

    Price, Daniel J

    2011-01-01

    Accounting for the Reynolds number is critical in numerical simulations of turbulence, particularly for subsonic flow. For Smoothed Particle Hydrodynamics (SPH) with constant artificial viscosity coefficient alpha, it is shown that the effective Reynolds number in the absence of explicit physical viscosity terms scales linearly with the Mach number - compared to mesh schemes, where the effective Reynolds number is largely independent of the flow velocity. As a result, SPH simulations with alpha=1 will have low Reynolds numbers in the subsonic regime compared to mesh codes, which may be insufficient to resolve turbulent flow. This explains the failure of Bauer and Springel (2011, arXiv:1109.4413v1) to find agreement between the moving-mesh code AREPO and the GADGET SPH code on simulations of driven, subsonic (v ~ 0.3 c_s) turbulence appropriate to the intergalactic/intracluster medium, where it was alleged that SPH is somehow fundamentally incapable of producing a Kolmogorov-like turbulent cascade. We show tha...

  13. Mach-Zehnder recording systems for pulsed power diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Miller, E. K.; Abbott, R. Q.; McKenna, I.; Macrum, G.; Baker, D.; Tran, V.; Rodriguez, E.; Kaufman, M. I.; Tibbits, A.; Silbernagel, C. T.; Waltman, T. B. [National Security Technologies, LLC, Santa Barbara and Livermore, California 93111 (United States); National Security Technologies, LLC, Los Alamos, New Mexico 87544 (United States); and National Security Technologies, LLC, North Las Vegas, Nevada 89193 (United States); Herrmann, H. W.; Kim, Y. H.; Mack, J. M.; Young, C. S.; Caldwell, S. E.; Evans, S. C.; Sedillo, T. J. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Stoeffl, W.; Grafil, E. [Lawrence Livermore National Laboratory, Livermore, California (United States); and others

    2012-10-15

    Fiber-optic transmission and recording systems, based on Mach-Zehnder modulators, have been developed and installed at the National Ignition Facility (NIF), and are being developed for other pulsed-power facilities such as the Z accelerator at Sandia, with different requirements. We present the design and performance characteristics for the mature analog links, based on the system developed for the Gamma Reaction History diagnostic at the OMEGA laser and at NIF. For a single detector channel, two Mach-Zehnders are used to provide high dynamic range at the full recording bandwidth with no gaps in the coverage. We present laboratory and shot data to estimate upper limits on the radiation effects as they impact recorded data quality. Finally, we will assess the technology readiness level for mature and developing implementations of Mach-Zehnder links for these environments.

  14. Mach-Zehnder recording systems for pulsed power diagnostics.

    Science.gov (United States)

    Miller, E K; Abbott, R Q; McKenna, I; Macrum, G; Baker, D; Tran, V; Rodriguez, E; Kaufman, M I; Tibbits, A; Silbernagel, C T; Waltman, T B; Herrmann, H W; Kim, Y H; Mack, J M; Young, C S; Caldwell, S E; Evans, S C; Sedillo, T J; Stoeffl, W; Grafil, E; Liebman, J; Beeman, B; Watts, P; Carpenter, A; Horsfied, C J; Rubery, M S; Chandler, G A; Torres, J A; Smelser, R M

    2012-10-01

    Fiber-optic transmission and recording systems, based on Mach-Zehnder modulators, have been developed and installed at the National Ignition Facility (NIF), and are being developed for other pulsed-power facilities such as the Z accelerator at Sandia, with different requirements. We present the design and performance characteristics for the mature analog links, based on the system developed for the Gamma Reaction History diagnostic at the OMEGA laser and at NIF. For a single detector channel, two Mach-Zehnders are used to provide high dynamic range at the full recording bandwidth with no gaps in the coverage. We present laboratory and shot data to estimate upper limits on the radiation effects as they impact recorded data quality. Finally, we will assess the technology readiness level for mature and developing implementations of Mach-Zehnder links for these environments.

  15. Mach-Zehnder Recording Systems for Pulsed Power Diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Miller, E K; McKenna, I; Macrum, G; Baker, D; Tran, V; Rodriguez, E; Kaufman, M I; Tibbits, A; Silbernagel, C T; Waltman, T B; Herrmann, H W; Kim, Y H; Mack, J M; Young, C S; Caldwell, S E; Evans, S C; Sedillo, T J; Stoeffl, W; Grafil, E; Liebman, J; Beeman, B; Watts, P; Carpenter, A; Horsfied, C J; Rubery, M S; Chandler, G A; Torres, J A

    2012-10-01

    Fiber-optic transmission and recording systems, based on Mach-Zehnder modulators, have been developed and installed at the National Ignition Facility (NIF), and are being developed for other pulsed-power facilities such as Z-R at Sandia, with different requirements. We present the design and performance characteristics for the mature analog links, based on the system developed for the Gamma Reaction History (GRH) diagnostic at OMEGA and NIF. For a single detector channel, two Mach-Zehnders are used to provide high dynamic range at the full recording bandwidth with no gaps in the coverage. We present laboratory and shot data to estimate upper limits on the radiation effects as they impact recorded data quality. Finally, we will assess the technology readiness level for mature and developing implementations of Mach-Zehnder links for these environments.

  16. World Nonproliferation Regime

    Institute of Scientific and Technical Information of China (English)

    Ouyang Liping; Wu Xingzuo

    2007-01-01

    2006 witnessed an intense struggle between nuclear proliferation and nonproliferation. Iran's nuclear issue and North Korea's nuclear test have cast a deep shadow over the current international nonproliferation regime. The international contest for civil nuclear development became especially fierce as global energy prices went up. Such a situation , to some extent, accelerated the pace of nuclear proliferation. Furthermore, the existing international nonproliferation regime, based upon the Nuclear Nonproliferation Treaty (NPT), was affected by loopholes, and the U.S. failed in its ambition to unite other forces to mend fences. The international community needs to come up with a comprehensive and long-term strategy to meet the demand for an effective future nonproliferation regime in a healthy nuclear order.

  17. High-order lattice Boltzmann models for wall-bounded flows at finite Knudsen numbers.

    Science.gov (United States)

    Feuchter, C; Schleifenbaum, W

    2016-07-01

    We analyze a large number of high-order discrete velocity models for solving the Boltzmann-Bhatnagar-Gross-Krook equation for finite Knudsen number flows. Using the Chapman-Enskog formalism, we prove for isothermal flows a relation identifying the resolved flow regimes for low Mach numbers. Although high-order lattice Boltzmann models recover flow regimes beyond the Navier-Stokes level, we observe for several models significant deviations from reference results. We found this to be caused by their inability to recover the Maxwell boundary condition exactly. By using supplementary conditions for the gas-surface interaction it is shown how to systematically generate discrete velocity models of any order with the inherent ability to fulfill the diffuse Maxwell boundary condition accurately. Both high-order quadratures and an exact representation of the boundary condition turn out to be crucial for achieving reliable results. For Poiseuille flow, we can reproduce the mass flow and slip velocity up to the Knudsen number of 1. Moreover, for small Knudsen numbers, the Knudsen layer behavior is recovered.

  18. Quantum heat engines based on electronic Mach-Zehnder interferometers

    Science.gov (United States)

    Hofer, Patrick P.; Sothmann, Björn

    2015-05-01

    We theoretically investigate the thermoelectric properties of heat engines based on Mach-Zehnder interferometers. The energy dependence of the transmission amplitudes in such setups arises from a difference in the interferometer arm lengths. Any thermoelectric response is thus of purely quantum-mechanical origin. In addition to an experimentally established three-terminal setup, we also consider a two-terminal geometry as well as a four-terminal setup consisting of two interferometers. We find that Mach-Zehnder interferometers can be used as powerful and efficient heat engines which perform well under realistic conditions.

  19. Transition to Double Mach Stem for Nuclear Explosion at 104 ft Height of Burst.

    Science.gov (United States)

    1981-11-17

    intersecting the ground. The initialization provides a strong shock with Mach number MI = 12. This speed and the need for restart capability led to the choice...a HOB of 104 ft (31.7m). A strong spherical shock is created in the surrounding air, and’ reflects from the grcund. 9 The outward-traveling airbiast...AIR FCIPCF SYST T’M CCvfvtANC NORTON" A!7, CA 9?40Pg (MIIJ’r’-MAN) QICY ATTN "INNYH "D IALAN5S<Y 0O1C Y ATTNJ MMN)) eHM kF-LVECCHir OICY ATTN fuNN w

  20. Study of Rayleigh scattering for visualization of helium-air mixing at Mach 6

    Science.gov (United States)

    Shirinzadeh, B.; Balla, R. J.; Hillard, M. E.; Anders, J. B.; Exton, R. J.; Waitz, I. A.

    1991-01-01

    Using an ArF excimer laser, planar Rayleigh scattering measurements were performed to investigate helium mixing into air at supersonic speeds. These experiments were conducted in the Mach 6, high-Reynolds-number facility at NASA Langley Research Center. The capability of the Rayleigh scattering technique for flow visualization of a turbulent environment was demonstrated. The qualitative agreement between the averaged Rayleigh results and the reduced mean-mass-densities obtained from probe measurements substantiate that careful application of the technique, even in the presence of clusters, can give very useful results. It was also demonstrated that planar, quantitative measurements can be made in the absence of clusters.

  1. Regimes of justification

    NARCIS (Netherlands)

    Arts, Irma; Buijs, A.E.; Verschoor, G.M.

    2017-01-01

    Legitimacy of environmental management and policies is an important topic in environmental research. Based on the notion of ‘regimes of justification’, we aim to analyse the dynamics in argumentations used to legitimize and de-legitimize Dutch nature conservation practices. Contrary to prior

  2. Modeling plasma glow discharges in Air near a Mach 3 bow shock with KRONOS

    Science.gov (United States)

    Rassou, Sebastien; Labaune, Julien; Packan, Denis; Elias, Paul-Quentin

    2016-09-01

    In this work, plasma glow discharge in Air is modeled near a Mach 3 bow shock. Numerical simulations are performed using the coupling KRONOS which have been developed at ONERA. The flow field is modeled using the code CFD: CEDRE from ONERA and the electrical and plasma part by the EDF open-source code CODE_SATURNE. The plasma kinetic modeling consists on a two-term Boltzmann equation solver and a chemical reaction solver depending of the electric field. The coupling KRONOS is fully parallelized and run on ONERA supercomputers. The shock wave is formed by the propagation of a supersonic flow (M = 3) through a truncated conical model mounted with a central spike. Depending on the spike's voltage value, corona, glow or arc regime could be obtained in a steady flow. The parameters for the supersonic flow and the spike configurations are chosen to be in glow discharge regime and to reproduce the experimental setup. In our simulations, 12 species and 80 reactions (ionization, electronic or vibrational excitation, attachment etc ...) are considered to properly model the glow discharge and the afterglow. In a stationary flow, glow discharge is observed only at the upstream of the shock wave near the high voltage spike. Behind the bow shock, in the afterglow, negative ions are provided by electrons attachment with O2. The negative ions flow convection ensures the electrical conduction and the establishment of the glow discharge.

  3. Concept Development of a Mach 1.6 High-Speed Civil Transport

    Science.gov (United States)

    Shields, Elwood W.; Fenbert, James W.; Ozoroski, Lori P.; Geiselhart, Karl A.

    1999-01-01

    A high-speed civil transport configuration with a Mach number of 1.6 was developed as part of the NASA High-Speed Research Program to serve as a baseline for assessing advanced technologies required for an aircraft with a service entry date of 2005. This configuration offered more favorable solutions to environmental concerns than configurations with higher Mach numbers. The Mach 1.6 configuration was designed for a 6500 n.mi. mission with a 250-passenger payload. The baseline configuration has a wing area of 8732 square feet a takeoff gross weight of 591570 lb, and four 41000-lb advanced turbine bypass engines defined by NASA. These engines have axisymmetric mixer-ejector nozzles that are assumed to yield 20 dB of noise suppression during takeoff, which is assumed to satisfy, the FAR Stage III noise requirements. Any substantial reduction in this assumed level of suppression would require oversizing the engines to meet community noise regulations and would severly impact the gross weight of the aircraft at takeoff. These engines yield a ratio of takeoff thrust to weight of 0.277 and a takeoff wing loading of 67.8 lb/square feet that results in a rotation speed of 169 knots. The approach velocity of the sized configuration at the end of the mission is 131 knots. The baseline configuration was resized with an engine having a projected life of 9000 hr for hot rotating parts and 18000 hr for the rest of the engine, as required for commercial use on an aircraft with a service entry date of 2005. Results show an increase in vehicle takeoff gross weight of approximately 58700 lb. This report presents the details of the configuration development, mass properties, aerodynamic design, propulsion system and integration, mission performance, and sizing.

  4. Tunable multiwavelength erbium-doped fiber laser based on an in-line Mach Zehnder interferometer

    Energy Technology Data Exchange (ETDEWEB)

    Han, Young-Geun [Hanyang University, Seoul (Korea, Republic of)

    2010-12-15

    A tunable multiwavelength erbium-doped fiber laser based on an in-line Mach Zehnder interferometer is proposed and experimentally demonstrated. The in-line Mach Zehnder interferometer is realized by using cascaded long-period fiber gratings. The long-period fiber gratings can couple the guided core mode to several cladding modes. If two identical long-period fiber gratings are concatenated, an interference pattern can be generated, which results from an interaction of the core and the cladding modes in the second long-period fiber grating. Therefore, a simple multichannel filter based on an in-line Mach Zehnder interferometer can be realized. The wavelength spacing of the proposed multichannel filter is controlled by the number of long-period fiber gratings. We apply the proposed multichannel fiber to the generation of a multiwavelength erbium-doped fiber laser with a tunability on the order of the wavelength spacing. An erbium-doped fiber amplifier is implemented as a gain medium. The gain competition of erbium ions is suppressed by soaking the erbium-doped fiber in liquid nitrogen. The power fluctuation of the proposed multiwavelength fiber laser is measured to be less than 0.5 dB. A high-quality multiwavelength output with a high extinction ratio of more than 40 dB is achieved. The wavelength spacing of the proposed multiwavelength fiber laser is controlled by increasing the number of long-period fiber gratings. The wavelength spacing is changed from 0.8 nm to 1.6 nm discretely.

  5. Study on the unified algorithm for three-dimensional complex problems covering various flow regimes using Boltzmann model equation

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The Boltzmann simplified velocity distribution function equation describing the gas transfer phenomena from various flow regimes will be explored and solved numerically in this study. The discrete velocity ordinate method of the gas kinetic theory is studied and applied to simulate the complex multi-scale flows. Based on the uncoupling technique on molecular movement and colliding in the DSMC method, the gas-kinetic finite difference scheme is constructed to directly solve the discrete velocity distribution functions by extending and applying the unsteady time-splitting method from computational fluid dynamics. The Gauss-type discrete velocity numerical quadrature technique for different Mach number flows is developed to evaluate the macroscopic flow parameters in the physical space. As a result, the gas-kinetic numerical algorithm is established to study the three-dimensional complex flows from rarefied transition to continuum regimes. The parallel strategy adapted to the gas-kinetic numerical algorithm is investigated by analyzing the inner parallel degree of the algorithm, and then the HPF parallel processing program is developed. To test the reliability of the present gas-kinetic numerical method, the three-dimensional complex flows around sphere and spacecraft shape with various Knudsen numbers are simulated by HPF parallel computing. The computational results are found in high resolution of the flow fields and good agreement with the theoretical and experimental data. The computing practice has confirmed that the present gas-kinetic algorithm probably provides a promising approach to resolve the hypersonic aerothermodynamic problems with the complete spectrum of flow regimes from the gas-kinetic point of view of solving the Boltzmann model equation.

  6. Heat transfer and pressure distributions on hemisphere-cylinders in methane-air combustion products at Mach 7

    Science.gov (United States)

    Weinstein, I.

    1973-01-01

    Heat-transfer and pressure distributions were measured over the surfaces of three hemisphere-cylinder models tested at a nominal Mach number of 7 in the Langley 8-foot high-temperature structures tunnel which uses methane-air products of combustion as a test medium. The results showed that the heat-transfer and pressure distributions over the surface of the models were in good agreement with experimental data obtained in air and also with theoretical predictions.

  7. Regimes Of Helium Burning

    CERN Document Server

    Timmes, F X

    2000-01-01

    The burning regimes encountered by laminar deflagrations and ZND detonations propagating through helium-rich compositions in the presence of buoyancy-driven turbulence are analyzed. Particular attention is given to models of X-ray bursts which start with a thermonuclear runaway on the surface of a neutron star, and the thin shell helium instability of intermediate-mass stars. In the X-ray burst case, turbulent deflagrations propagating in the lateral or radial directions encounter a transition from the distributed regime to the flamlet regime at a density of 10^8 g cm^{-3}. In the radial direction, the purely laminar deflagration width is larger than the pressure scale height for densities smaller than 10^6 g cm^{-3}. Self-sustained laminar deflagrations travelling in the radial direction cannot exist below this density. Similarily, the planar ZND detonation width becomes larger than the pressure scale height at 10^7 g cm^{-3}, suggesting that a steady-state, self-sustained detonations cannot come into exista...

  8. Effects of wind-tunnel noise on swept-cylinder transition at Mach 3.5

    Science.gov (United States)

    Creel, T. R., Jr.; Beckwith, I. E.; Chen, F.-J.

    1986-01-01

    Transition data are reported for circular cylinders at swept angles of 45 and 60 degrees in the Mach 3.5 pilot-low-disturbance tunnel where free-stream noise levels are varied from approximately .05-0.5 percent in terms of the rms fluctuating pressure normalized by the mean static pressure. Results indicate that end plate or boundary layer trip disturbances at the upstream end of the cylinders cause turbulent flow along the entire test Reynolds number range of 10-170 thousand per inch. With all end plate and trip disturbances removed, transition at the attachment lines occurred at free-stream Reynolds numbers based on diameters of about 70-80 thousand, independent of stream noise levels. The installation of small trips on the attachement lines caused transition at lower Reynolds numbers, depending on both the roughness height and the wind tunnel noise level.

  9. 3 TUNNELS IN THE ENGINE RESEARCH BUILDING ERB - IN CELL CE-26 VARIABLE REYNOLDS NUMBER SUPERSONIC NO

    Science.gov (United States)

    1956-01-01

    3 TUNNELS IN THE ENGINE RESEARCH BUILDING ERB - IN CELL CE-26 VARIABLE REYNOLDS NUMBER SUPERSONIC NOZZLE - CELL CE-4 6X6 INCH MACH NUMBER 2.96 SUPERSONIC AIRPLANE - CELL 1-NW 1X1 FOOT MACH 3.12 SUPERSONIC TUNNEL

  10. Mach-Zehnder fiber interferometer for people monitoring

    Science.gov (United States)

    Vasinek, Vladimir; Latal, Jan; Koudelka, Petr; Siska, Petr; Vitasek, Jan; Skapa, Jan

    2010-10-01

    Fiber optical interferometers belong to highly sensitive equipments that are able to measure slight changes like distortion of shape, temperature and electric field variation and etc. Their great advantage is that they are insensitive on ageing component, from which they are composed of. It is in virtue of herewith, that there are evaluated no changes in optical signal intensity but number interference fringes. To monitor the movement of persons, eventually to analyze the changes in state of motion we developed method based on analysis the dynamic changes in interferometric pattern. We have used Mach- Zehnder interferometer with conventional SM fibers excited with the DFB laser at wavelength of 1550 nm. It was terminated with optical receiver containing InGaAs PIN photodiode. Its output was brought into measuring card module that performs on FFT of the received interferometer signal. The signal rises with the composition of two waves passing through single interferometer arm. The optical fiber SMF 28e in one arm is referential; the second one is positioned on measuring slab at dimensions of 1x2m. A movement of persons over the slab was monitored, signal processed with FFT and frequency spectra were evaluated. They rose owing to dynamic changes of interferometric pattern. The results reflect that the individual subjects passing through slab embody characteristic frequency spectra, which are individual for particular persons. The scope of measuring frequencies proceeded from zero to 10 KHz. It was also displayed in experiments that the experimental subjects, who walked around the slab and at the same time they have had changed their state of motion (knee joint fixation), embodied characteristic changes in their frequency spectra. At experiments the stability of interferometric patterns was evaluated as from time aspects, so from the view of repeated identical experiments. Two kinds of balls (tennis and ping-pong) were used to plot the repeatability measurements and

  11. Convective Regimes in Crystallizing Basaltic Magma Chambers

    Science.gov (United States)

    Gilbert, A. J.; Neufeld, J. A.; Holness, M. B.

    2015-12-01

    Cooling through the chamber walls drives crystallisation in crustal magma chambers, resulting in a cumulate pile on the floor and mushy regions at the walls and roof. The liquid in many magma chambers, either the bulk magma or the interstitial liquid in the mushy regions, may convect, driven either thermally, due to cooling, or compositionally, due to fractional crystallization. We have constructed a regime diagram of the possible convective modes in a system containing a basal mushy layer. These modes depend on the large-scale buoyancy forcing characterised by a global Rayleigh number and the proportion of the chamber height constituting the basal mushy region. We have tested this regime diagram using an analogue experimental system composed of a fluid layer overlying a pile of almost neutrally buoyant inert particles. Convection in this system is driven thermally, simulating magma convection above and within a porous cumulate pile. We observe a range of possible convective regimes, enabling us to produce a regime diagram. In addition to modes characterised by convection of the bulk and interstitial fluid, we also observe a series of regimes where the crystal pile is mobilised by fluid motions. These regimes feature saltation and scouring of the crystal pile by convection in the bulk fluid at moderate Rayleigh numbers, and large crystal-rich fountains at high Rayleigh numbers. For even larger Rayleigh numbers the entire crystal pile is mobilised in what we call the snowglobe regime. The observed mobilisation regimes may be applicable to basaltic magma chambers. Plagioclase in basal cumulates crystallised from a dense magma may be a result of crystal mobilisation from a plagioclase-rich roof mush. Compositional convection within such a mush could result in disaggregation, enabling the buoyant plagioclase to be entrained in relatively dense descending liquid plumes and brought to the floor. The phenocryst load in porphyritic lavas is often interpreted as a

  12. East Asian welfare regime

    DEFF Research Database (Denmark)

    Abrahamson, Peter

    2017-01-01

    . Political science studies tend to conclude that the region has left the old legacies behind and are now welfare states comparable to European states including them either in the conservative type (e.g. Japan), the liberal type (e.g. Korea) or even as a tendency in the Nordic type (e.g. China), while studies......The paper asks if East Asian welfare regimes are still productivist and Confucian? And, have they developed public care policies? The literature is split on the first question but (mostly) confirmative on the second. Care has to a large, but insufficient extent, been rolled out in the region...

  13. Quantitative Global Heat Transfer in a Mach-6 Quiet Tunnel

    Science.gov (United States)

    Sullivan, John P.; Schneider, Steven P.; Liu, Tianshu; Rubal, Justin; Ward, Chris; Dussling, Joseph; Rice, Cody; Foley, Ryan; Cai, Zeimin; Wang, Bo; Woodiga, Sudesh

    2012-01-01

    This project developed quantitative methods for obtaining heat transfer from temperature sensitive paint (TSP) measurements in the Mach-6 quiet tunnel at Purdue, which is a Ludwieg tube with a downstream valve, moderately-short flow duration and low levels of heat transfer. Previous difficulties with inferring heat transfer from TSP in the Mach-6 quiet tunnel were traced to (1) the large transient heat transfer that occurs during the unusually long tunnel startup and shutdown, (2) the non-uniform thickness of the insulating coating, (3) inconsistencies and imperfections in the painting process and (4) the low levels of heat transfer observed on slender models at typical stagnation temperatures near 430K. Repeated measurements were conducted on 7 degree-half-angle sharp circular cones at zero angle of attack in order to evaluate the techniques, isolate the problems and identify solutions. An attempt at developing a two-color TSP method is also summarized.

  14. Global versus Local -- Mach's Principle versus the Equivalence Principle

    CERN Document Server

    Singleton, Douglas

    2016-01-01

    The equivalence principle is the conceptual basis for general relativity. In contrast Mach's principle, although said to have been influential on Einstein in his formulation of general relativity, has not been shown to be central to the structure of general relativity. In this essay we suggest that the quantum effects of Hawking and Unruh radiation are a manifestation of a {\\it thermal} Mach's principle, where the local thermodynamic properties of the system are determined by the non-local structure of the quantum fields which determine the vacuum of a given spacetime. By comparing Hawking and Unruh temperatures for the same local acceleration we find a violation of the Einstein elevator version of the equivalence principle, which vanishes in the limit that the horizon is approached.

  15. A Solar System Test of Mach's Principle with Gravimetric Data

    CERN Document Server

    Unzicker, A; Fabian, Karl; Unzicker, Alexander

    2006-01-01

    We present a new test for a possible Mach-Sciama dependence of the Gravitational constant G. According to Ernst Mach (1838-1916), the gravitational interaction depends on the distribution of masses in the universe. A corresponding hypothesis of Sciama (1953) on the gravitational constant, $c^2/G = \\sum m_i/r_i$, can be tested since the elliptic earth orbit should then cause minute annual variations in G. The test is performed by analyzing the gravity signals of a network of superconducting gravimeters (SG) which reach a precision of $10^{-10} m/s^2$. After reducing the signal by modelling tidal, meteorologic and geophysical effects, no significant evidence for the above dependence is found.

  16. Quantum interference in an asymmetric Mach-Zehnder interferometer

    Science.gov (United States)

    Trenti, A.; Borghi, M.; Mancinelli, M.; Price, H. M.; Fontana, G.; Pavesi, L.

    2016-08-01

    A re-visitation of the well known free space Mach-Zehnder interferometer is reported here. The coexistence between one-photon and two-photons interference from collinear color entangled photon pairs is investigated. Thisarises from an arbitrarily small unbalance in the arm transmittance. The tuning of such asymmetry is reflected in dramatic changes in the coincidence detection, revealing beatings between one particle and two particle interference patterns. In particular, the role of the losses and of the intrinsic phase imperfectness of the lossy beamsplitter are explored in a single-port excited Mach-Zehnder interferometer. This configuration is especially useful for quantum optics on a chip, where the guiding geometry forces photons to travel in the same spatial mode.

  17. Spatial heterodyne spectrometer based on the Mach-Zehnder interferometer

    Science.gov (United States)

    Cai, Qisheng; Xiangli, Bin; Du, Shusong

    2015-11-01

    Spatial heterodyne spectroscopy (SHS) is a new kind of Fourier-transform spectroscopic technique capable of very high spectral resolution. In this paper, a spatial heterodyne spectrometer based on the Mach-Zehnder interferometer (MZ-SHS) is proposed. It is modified by replacing one mirror in the Mach-Zehnder interferometer with a diffraction grating. This technique retains many of the advantages of traditional SHS. Moreover, the spatial frequency of the interferogram is strictly linear with wavenumber. We describe the concept of the new MZ-SHS and elaborate the exact expression of the interferogram. Also, a design example and two kinds of imitated interferograms are presented in this paper. One is simulated in MATLAB and the other is generated in ZEMAX using ray tracing method. The retrieved spectra from these two interferograms show a good agreement with the theoretical results.

  18. Effect of winglets on a first-generation jet transport wing. 4: Stability characteristics for a full-span model at Mach 0.30

    Science.gov (United States)

    Meyer, R. R., Jr.

    1978-01-01

    The static longitudinal and lateral directional characteristics of a 0.035 scale model of a first generation jet transport were obtained with and without upper winglets. The data were obtained for take off and landing configurations at a free stream Mach number of 0.30. The results generally indicated that upper winglets had favorable effects on the stability characteristics of the aircraft.

  19. Emergent physics on Mach's principle and the rotating vacuum

    CERN Document Server

    Jannes, G

    2015-01-01

    Mach's principle applied to rotation can be correct if one takes into account the rotation of the quantum vacuum together with the Universe. Whether one can detect the rotation of the vacuum or not depends on its properties. If the vacuum is fully relativistic at all scales, Mach's principle should work and one cannot distinguish the rotation: in the rotating Universe+vacuum, the co-rotating bucket will have a flat surface (not concave). However, if there are "quantum gravity" effects which violate Lorentz invariance at high energy, then the rotation will become observable. This is demonstrated by analogy in condensed-matter systems, which consist of two subsystems: superfluid background (analog of vacuum) and "relativistic" excitations (analog of matter). For the low-energy (long-wavelength) observer the rotation of the vacuum is not observable. In the rotating frame, the "relativistic" quasiparticles feel the background as a Minkowski vacuum, i.e. they do not feel the rotation. Mach's idea of the relativity...

  20. A Detailed Investigation of Staged Normal Injection into a Mach 2 Flow

    Science.gov (United States)

    Eklund, Dean R.; Northam, G. Burton; Hartfield, Roy J., Jr.

    1990-01-01

    A study of the staged injection of two jets of air behind a rearward facing step into a Mach 2 flow was performed using the SPARK 3-D Navier-Stokes code. Calculated mole fraction distributions were compared with an extensive set of planar mole fraction measurements made with a laser induced iodine fluorescence technique. A statistical measure, the standard deviation, was used to help assess agreement between calculation and experiment. Overall, good agreement was found between calculated and measured values. Generally, agreement was better in the far field of the injectors. The effect of grid resolution was investigated by calculating solutions on grids of 60,000, 200,000, and 450,000 points. Differences in the solutions on the two finer grids were small. However, the mole fraction distributions were distinguishable. The effect of turbulence modeling was investigated by employing three different algebraic models for the jet turbulence: the Baldwin-Lomax model, the Prandtl mixing length model, and the Eggers mixing length model. Overall, the Eggers mixing length model was found to be superior for this case. Finally, the effect of the jet exit conditions was examined. A recently proposed Mach number distribution at the jet exit was found to slightly improve agreement between measurement and calculation.

  1. Hypersonic characteristics of an advanced aerospace plane at Mach 20.3

    Science.gov (United States)

    Mccandless, R. S.

    1985-01-01

    Wind-tunnel studies have been performed in the Langley Hypersonic Helium Tunnel Facility to obtain static longitudinal and lateral-directional aerodynamic characteristics of an advanced aerospace plane concept. The nominal test conditions are a Mach number of 20.3 and a Reynolds number of 6.8 x 10 to the 6th power per foot at angles of attack from 0 to 25 deg and angles of sideslip of -3 and 0 deg. Stability and control characteristics are obtained for several deflections of the elevators, elevons, and rudder. In addition, a modified canopy is examined. The results indicate that this vehicle is longitudinally stable at angles of attack near the maximum lift-drag ratio. Also, the vehicle is shown to be directionally unstable with positive dihedral effect.

  2. Supply regimes in fisheries

    DEFF Research Database (Denmark)

    Nielsen, Max

    2006-01-01

    Supply in fisheries is traditionally known for its backward bending nature, owing to externalities in production. Such a supply regime, however, exist only for pure open access fisheries. Since most fisheries worldwide are neither pure open access, nor optimally managed, rather between the extremes......-economic supply model with mesh sizes is developed. It is found that in the presence of realistic management schemes, the supply curves are close to vertical in the relevant range. Also, the supply curve under open access with mesh size limitations is almost vertical in the relevant range, owing to constant...... recruitment. The implications are that the effects on supply following from e.g. trade liberalisation and reductions of subsidies are small in several and probably most fisheries worldwide. Keywords: backward-bending supply, regulated open access, regulated restricted access, mesh size regulation, Beverton...

  3. Gas-kinetic unified algorithm for hypersonic flows covering various flow regimes solving Boltzmann model equation in nonequilibrium effect

    Science.gov (United States)

    Li, Zhihui; Wu, Junlin; Ma, Qiang; Jiang, Xinyu; Zhang, Hanxin

    2014-12-01

    Based on the Gas-Kinetic Unified Algorithm (GKUA) directly solving the Boltzmann model equation, the effect of rotational non-equilibrium is investigated recurring to the kinetic Rykov model with relaxation property of rotational degrees of freedom. The spin movement of diatomic molecule is described by moment of inertia, and the conservation of total angle momentum is taken as a new Boltzmann collision invariant. The molecular velocity distribution function is integrated by the weight factor on the internal energy, and the closed system of two kinetic controlling equations is obtained with inelastic and elastic collisions. The optimization selection technique of discrete velocity ordinate points and numerical quadrature rules for macroscopic flow variables with dynamic updating evolvement are developed to simulate hypersonic flows, and the gas-kinetic numerical scheme is constructed to capture the time evolution of the discretized velocity distribution functions. The gas-kinetic boundary conditions in thermodynamic non-equilibrium and numerical procedures are studied and implemented by directly acting on the velocity distribution function, and then the unified algorithm of Boltzmann model equation involving non-equilibrium effect is presented for the whole range of flow regimes. The hypersonic flows involving non-equilibrium effect are numerically simulated including the inner flows of shock wave structures in nitrogen with different Mach numbers of 1.5-Ma-25, the planar ramp flow with the whole range of Knudsen numbers of 0.0009-Kn-10 and the three-dimensional re-entering flows around tine double-cone body.

  4. Gas-kinetic unified algorithm for hypersonic flows covering various flow regimes solving Boltzmann model equation in nonequilibrium effect

    Energy Technology Data Exchange (ETDEWEB)

    Li, Zhihui; Ma, Qiang [Hypervelocity Aerodynamics Institute, China Aerodynamics Research and Development Center, P.O.Box 211, Mianyang 621000, China and National Laboratory for Computational Fluid Dynamics, No.37 Xueyuan Road, Beijing 100191 (China); Wu, Junlin; Jiang, Xinyu [Hypervelocity Aerodynamics Institute, China Aerodynamics Research and Development Center, P.O.Box 211, Mianyang 621000 (China); Zhang, Hanxin [National Laboratory for Computational Fluid Dynamics, No.37 Xueyuan Road, Beijing 100191 (China)

    2014-12-09

    Based on the Gas-Kinetic Unified Algorithm (GKUA) directly solving the Boltzmann model equation, the effect of rotational non-equilibrium is investigated recurring to the kinetic Rykov model with relaxation property of rotational degrees of freedom. The spin movement of diatomic molecule is described by moment of inertia, and the conservation of total angle momentum is taken as a new Boltzmann collision invariant. The molecular velocity distribution function is integrated by the weight factor on the internal energy, and the closed system of two kinetic controlling equations is obtained with inelastic and elastic collisions. The optimization selection technique of discrete velocity ordinate points and numerical quadrature rules for macroscopic flow variables with dynamic updating evolvement are developed to simulate hypersonic flows, and the gas-kinetic numerical scheme is constructed to capture the time evolution of the discretized velocity distribution functions. The gas-kinetic boundary conditions in thermodynamic non-equilibrium and numerical procedures are studied and implemented by directly acting on the velocity distribution function, and then the unified algorithm of Boltzmann model equation involving non-equilibrium effect is presented for the whole range of flow regimes. The hypersonic flows involving non-equilibrium effect are numerically simulated including the inner flows of shock wave structures in nitrogen with different Mach numbers of 1.5-Ma-25, the planar ramp flow with the whole range of Knudsen numbers of 0.0009-Kn-10 and the three-dimensional re-entering flows around tine double-cone body.

  5. Calibration and Performance of the AEDC/VKF Tunnel C, Mach Number 4, Aerothermal Wind Tunnel

    Science.gov (United States)

    1982-06-01

    Beattie - Bridgeman equation of state for air is shown in the figures included in this appendix. Real-Gas Enthalpy General Forms The following... Beattie - Bridgeman equation of state for air. 106 AEDC-TR-82-6 P(Rea1 Gas) R(P/PT)(P/PT)Idea1 8 PT1. 02 Sym 0 Computed Real-Gas Values Curve Fit TT, oR ~600...chamber properties; then the results were adjusted to include the real-gas effects. The real-gas properties are based on the Beattie - Bridgeman equation

  6. Performance Limiting Flow Processes in High-State Loading High-Mach Number Compressors

    Science.gov (United States)

    2008-03-13

    stage matching, and thus the performance of such machines. As such, the understanding, empiricism , and guidelines which apply well to machines of lower...discrete vortex with opposite circulation to the previous one is shed. A vortex street which is " locked " to the rotor passing is thus formed downstream of...255-6802 x231 (email: [)ouglas.Rabc,(wpatb.af.rnil) Dr. John Adamczyk, retired scientist from NASA GRC, has also contributed much to the research 18. 0

  7. Numerical prediction of flow induced noise in free jets of high Mach numbers

    OpenAIRE

    Schönrock, Olaf

    2009-01-01

    A direct aeroacoustic simulation methodology is developed on the basis of the numerical schemes implemented in the commercial tool ANSYS CFX. The focus lies upon the efficient and direct numerical prediction of the flow-induced noise generated by natural gas and pneumatic applications. The respective compressed gas related components are characterized by tiny supersonic gas jets, strong noise emissions, poor accessibility by measurement techniques and excessive simulation costs in particular...

  8. Numerical Simulations of Flow in a 3-D Supersonic Intake at High Mach Numbers

    Directory of Open Access Journals (Sweden)

    R. Sivakumar

    2006-10-01

    Full Text Available Numerical simulations of the compressible, 3-D non reacting flow in the engine inlet sectionof a concept hypersonic air-breathing vehicle are presented. These simulations have been carriedout using FLUENT. For all the results reported, the mesh has been refined to achieve areaaveragedwall y+ about 105. Mass flow rate through the intake and stagnation pressure recoveryare used to compare the performance at various angles of attack. The calculations are able topredict the mode of air-intake operation (critical and subcritical for different angles of attack.Flow distortion at the intake for various angles of attack is also calculated and discussed. Thenumerical results are validated by simulating the flow through a 2-D mixed compression hypersonicintake model and comparing with the experimental data.

  9. High Mach-number collisionless shock driven by a laser with an external magnetic field

    Directory of Open Access Journals (Sweden)

    Morita T.

    2013-11-01

    Full Text Available Collisionless shocks are produced in counter-streaming plasmas with an external magnetic field. The shocks are generated due to an electrostatic field generated in counter-streaming laser-irradiated plasmas, as reported previously in a series of experiments without an external magnetic field [T. Morita et al., Phys. Plasmas, 17, 122702 (2010, Kuramitsu et al., Phys. Rev. Lett., 106, 175002 (2011] via laser-irradiation of a double-CH-foil target. A magnetic field is applied to the region between two foils by putting an electro-magnet (∼10 T perpendicular to the direction of plasma expansion. The generated shocks show different characteristics later in time (t > 20ns.

  10. Boundary Layer Trip Performance Test on a 7-deg Cone Model at Mach Number 8

    Science.gov (United States)

    1983-10-01

    b r a t i o n Re ldenha in Rotary Encoder ROD700 Resolut lo=:O, O000 des Dvora l l Accuracy: 0-001 des P a n a x e t r i c a MG-IOI Mois...LAYER STABILITY TEST PUN NUHuER 1028 PAGE 1 / - % DATE COMPUTED I1-0Cm~83 DATE R~CORDEO 2-~1 𔃽 TI~E RECORDED 71~56~0 TIHK COMPUTED 09130 PROJECT... kiln NJOm;~Vle Jo~k LRETA 1.053E*03 1.821E+O$ 2.192E*03 2.553E*03 3.104E+03 4.54bE+03 6 .352E*03 80101E*03 10068E*04 1.250E*04 1.52~Et04

  11. Practical computational aeroacoustics for complex confined scattering geometries in low mach number flows

    DEFF Research Database (Denmark)

    Pradera-Mallabiabarrena, Ainara; Jacobsen, Finn; Svendsen, Christian

    2013-01-01

    -compact surfaces are involved. Here the generation of noise is dominated by the interaction of the flow with a surface whose maximum dimension is shorter than the wavelength of interest. The analysis is based on the surface-source term of the Ffowcs Williams-Hawkings equation. The acoustic source data of the flow...

  12. Comparison of Experiment and Analysis for a High Primary Mach Number Ejector

    Science.gov (United States)

    1977-05-01

    ure the secondary total pressure, also recorded on the HP plotter. A 30" (76.2cm) mercury manometer was used to measure directly the secondary total...supply pressure were readjusted to give the required total secondary pressure reading on the mercury manometer . Heat was added to keep the air streams at

  13. Influence of Mach Number and Dynamic Pressure on Cavity Tones and Freedrop Trajectories

    Science.gov (United States)

    2014-03-27

    1 0 ) ; 157 A. p12= p o l y f i t ( x ’ ,A. fcon , 1 2 ) ; 158 A. p14= p o l y f i t ( x ’ ,A. fcon , 1 4 ) ; 159 A. p16 = p o l y f i t ( x ’ ,A...x ) ; 164 A. f i t 1 2 = p o l y v a l (A. p12 , x ) ; 165 A. f i t 1 4 = p o l y v a l (A. p14 , x ) ; 166 A. f i t 1 6 = p o l y v a l (A. p16

  14. Asymptotic Steady State Solution to a Bow Shock with an Infinite Mach Number

    CERN Document Server

    Yalinewich, Almog

    2015-01-01

    The problem of a cold gas flowing past a stationary object is considered. It is shown that at large distances from the obstacle the shock front forms a parabolic solid of revolution. The interior of the shock front is obtained by solution of the hydrodynamic equations in parabolic coordinates. The results are verified with a hydrodynamic simulation. The drag force and expected spectra are calculated for such shock, both in case of an optically thin and thick media. Finally, relations to astrophysical bow shocks and other analytic works on oblique shocks are discussed.

  15. High-Speed Noninvasive Multi-Parameter Laser Diagnostics for High-Mach-Number Flows Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Numerous ground test and wind tunnel facilities are used extensively to generate forces and moments as well as surface measurements of test articles required to...

  16. Growth of a gas bubble in a supersaturated and slightly compressible liquid at low Mach number

    Science.gov (United States)

    Mohammadein, S. A.; Mohamed, K. G.

    2011-12-01

    In this paper, the growth of a gas bubble in a supersaturated and slightly compressible liquid is discussed. The mathematical model is solved analytically by using the modified Plesset and Zwick method. The growth process is affected by: sonic speed in the liquid, polytropic exponent, diffusion coefficient, initial concentration difference, surface tension, viscosity, adjustment factor and void fraction. The famous formula of Plesset and Zwick is produced as a special case of the result at some values of the adjustment factor. Moreover, the resultant formula is implemented to the case of the growth of underwater gas bubble.

  17. Achieving accurate and efficient prediction of HVAC diaphragm noise at realistic Reynolds and Mach numbers

    NARCIS (Netherlands)

    Guilloud, G.; Schram, C.; Golliard, J.

    2009-01-01

    Despite the aeroacoustic expertise reached nowadays in air and ground transportation, energy sector or domestic appliances, reaching a decibel accuracy of an acoustic prediction for industrial cases is still challenging. Strong investments are made nowadays by oil and gas companies to determine and

  18. Resilience of river flow regimes.

    Science.gov (United States)

    Botter, Gianluca; Basso, Stefano; Rodriguez-Iturbe, Ignacio; Rinaldo, Andrea

    2013-08-06

    Landscape and climate alterations foreshadow global-scale shifts of river flow regimes. However, a theory that identifies the range of foreseen impacts on streamflows resulting from inhomogeneous forcings and sensitivity gradients across diverse regimes is lacking. Here, we derive a measurable index embedding climate and landscape attributes (the ratio of the mean interarrival of streamflow-producing rainfall events and the mean catchment response time) that discriminates erratic regimes with enhanced intraseasonal streamflow variability from persistent regimes endowed with regular flow patterns. Theoretical and empirical data show that erratic hydrological regimes typical of rivers with low mean discharges are resilient in that they hold a reduced sensitivity to climate fluctuations. The distinction between erratic and persistent regimes provides a robust framework for characterizing the hydrology of freshwater ecosystems and improving water management strategies in times of global change.

  19. Impinging Jet Resonant Modes at Mach 1.5

    CERN Document Server

    Davis, Timothy

    2013-01-01

    High speed impinging jets have been the focus of several studies owing to their practical application and resonance dominated flow-field. The current study focuses on the identification and visualization of the resonant modes at certain critical impingement heights for a Mach 1.5 normally impinging jet. These modes are associated with high amplitude, discrete peaks in the power spectra and can be identified as having either axisymmetric or azimuthal modes. Their visualization is accomplished through phase-locked Schlieren imaging and fast-response pressure sensitive paint (PC-PSP) applied to the ground plane.

  20. Temperature sensitivity of waveguide Mach-Zehnder interferometer

    OpenAIRE

    Sokolov, Viktor

    2013-01-01

    This thesis is part of a project that aims to develop a sensor for the detection of methane in the air and in water based on a waveguide Mach-Zehnder interferometer. The main application of this sensor is monitoring the environment and the ability to detect a leakage of methane. The development of a sensor includes analysis of operational conditions. In this project one of the greatest concerns is temperature. The temperature difference can reach several tens of degrees in the air, and severa...

  1. Quantum logic processor: Implementation with electronic Mach-Zehnder interferometer

    Science.gov (United States)

    Sarkar, Angik; Bhattacharyya, T. K.; Patwardhan, Ajay

    2006-05-01

    An approach for implementation of quantum logic in electronic Mach-Zehnder interferometer (MZI) has been described in this letter. All single qubit gates can be achieved by electron spin manipulation using Rashba spin-orbit coupling. Double qubit gates can also be implemented using the orbital degree of freedom of the electron. The MZI can be realized with intertwined ballistic nanowires. Spin injection and detection in the system can be done by a mesoscopic Stern-Gerlach apparatus. The system can be coupled in an array to form the quantum logic processor.

  2. On Mach's Principle and the "Special" Theory of Relativity

    CERN Document Server

    Ashura, Uzumaki

    2016-01-01

    First, we present a history of the school of thought that the Cosmic Microwave Background Radiation acts as an ether in language familiar to high school students in English-speaking countries. Then we illustrate the properties of this ether and of a hypothetical "test mass" using a brand new thought experiment. Finally, we recount some post-Einstein efforts at a mathematical formulation of Mach's principle and raise some questions about what implications it has for the locality of rotation and for quantum gravity. This paper does not prove Einstein wrong.

  3. Calibration of the 7—Equation Transition Model for High Reynolds Flows at Low Mach

    Science.gov (United States)

    Colonia, S.; Leble, V.; Steijl, R.; Barakos, G.

    2016-09-01

    The numerical simulation of flows over large-scale wind turbine blades without considering the transition from laminar to fully turbulent flow may result in incorrect estimates of the blade loads and performance. Thanks to its relative simplicity and promising results, the Local-Correlation based Transition Modelling concept represents a valid way to include transitional effects into practical CFD simulations. However, the model involves coefficients that need tuning. In this paper, the γ—equation transition model is assessed and calibrated, for a wide range of Reynolds numbers at low Mach, as needed for wind turbine applications. An aerofoil is used to evaluate the original model and calibrate it; while a large scale wind turbine blade is employed to show that the calibrated model can lead to reliable solutions for complex three-dimensional flows. The calibrated model shows promising results for both two-dimensional and three-dimensional flows, even if cross-flow instabilities are neglected.

  4. Unitary Housing Regimes in Transition

    DEFF Research Database (Denmark)

    Bengtsson, Bo; Jensen, Lotte

    2013-01-01

    to the Danish and Swedish housing regimes are analysed and the responses and outcomes in terms of policy change and/or institutional continuity (path dependence) are compared. Overall, the more decentralized Danish housing regime seems to have resisted pressures for change and retrenchment better so far than...

  5. Regime shifts in resource management

    NARCIS (Netherlands)

    de Zeeuw, A.J.

    2014-01-01

    Resource management has to take account of the possibility of tipping points and regime shifts in ecological systems that provide the resources. This article focuses on the typical model of regime shifts in the ecological literature and analyzes optimal management and common-property issues when tra

  6. Examination Regimes and Student Achievement

    Science.gov (United States)

    Cosentino de Cohen, Clemencia

    2010-01-01

    Examination regimes at the end of secondary school vary greatly intra- and cross-nationally, and in recent years have undergone important reforms often geared towards increasing student achievement. This research presents a comparative analysis of the relationship between examination regimes and student achievement in the OECD. Using a micro…

  7. 'Regime shopping' across (blurring) boundaries

    NARCIS (Netherlands)

    Houwerzijl, M.S.; Evju, Stein

    2014-01-01

    This book chapter identifies and explores the (blurring) boundaries between the legal regimes for labour mobility across the EU. In the context of - what is sometimes called - 'regime shopping' a close look is taken into the law on freedom of movement within the EU. Several categories of transnation

  8. 'Regime shopping' across (blurring) boundaries

    NARCIS (Netherlands)

    Houwerzijl, M.S.; Evju, Stein

    2014-01-01

    This book chapter identifies and explores the (blurring) boundaries between the legal regimes for labour mobility across the EU. In the context of - what is sometimes called - 'regime shopping' a close look is taken into the law on freedom of movement within the EU. Several categories of

  9. Cosmological constant implementing Mach principle in general relativity

    Science.gov (United States)

    Namavarian, Nadereh; Farhoudi, Mehrdad

    2016-10-01

    We consider the fact that noticing on the operational meaning of the physical concepts played an impetus role in the appearance of general relativity (GR). Thus, we have paid more attention to the operational definition of the gravitational coupling constant in this theory as a dimensional constant which is gained through an experiment. However, as all available experiments just provide the value of this constant locally, this coupling constant can operationally be meaningful only in a local area. Regarding this point, to obtain an extension of GR for the large scale, we replace it by a conformal invariant model and then, reduce this model to a theory for the cosmological scale via breaking down the conformal symmetry through singling out a specific conformal frame which is characterized by the large scale characteristics of the universe. Finally, we come to the same field equations that historically were proposed by Einstein for the cosmological scale (GR plus the cosmological constant) as the result of his endeavor for making GR consistent with the Mach principle. However, we declare that the obtained field equations in this alternative approach do not carry the problem of the field equations proposed by Einstein for being consistent with Mach's principle (i.e., the existence of de Sitter solution), and can also be considered compatible with this principle in the Sciama view.

  10. Generation of sub-Poissonian photon number distribution

    DEFF Research Database (Denmark)

    Grønbech-Jensen, N.; Ramanujam, P. S.

    1990-01-01

    An optimization of a nonlinear Mach-Zehnder interferometer to produce sub-Poissonian photon number distribution is proposed. We treat the system quantum mechanically and estimate the mirror parameters, the nonlinearity of the medium in the interferometer, and the input power to obtain minimal...... output uncertainty in the photon number. The power efficiency of the system is shown to be high....

  11. 3-D Wizardry: Design in Papier-Mache, Plaster, and Foam.

    Science.gov (United States)

    Wolfe, George

    Papier-mache, plaster, and foam are inexpensive and versatile media for 3-dimensional classroom and studio art experiences. They can be used equally well by elementary, high school, or college students. Each medium has its own characteristic. Papier-mache is pliable but dries into a hard, firm surface that can be waterproofed. Plaster can be…

  12. 3-D Wizardry: Design in Papier-Mache, Plaster, and Foam.

    Science.gov (United States)

    Wolfe, George

    Papier-mache, plaster, and foam are inexpensive and versatile media for 3-dimensional classroom and studio art experiences. They can be used equally well by elementary, high school, or college students. Each medium has its own characteristic. Papier-mache is pliable but dries into a hard, firm surface that can be waterproofed. Plaster can be…

  13. Fundamental and analytical studies of optical emission from the Mach disk extracted from an ICP

    Energy Technology Data Exchange (ETDEWEB)

    Luan, S.; Pang, H.; Houk, R.S. [Iowa State Univ., Ames, IA (United States)

    1994-12-31

    An inductively coupled plasma is extracted into a small quartz vacuum chamber (approximately 1 torr) through a sampling orifice in a copper disk. Optical emission from the Mach disk region is measured with a new type of echelle spectrometer with two segmented-array charge-coupled device detectors (SCD), the Optima 3000 from Perkin-Elmer. This detector provides excellent quantum efficiency throughout the UV-visible region, as well as low dark current and readout noises. The spectral background emitted by the Mach disk is very low. If analyte line intensities from the Mach disk can be enhanced, the combined ICP-Mach disk-Optima instrument should provide excellent detection limits for simultaneous multielement analysis. Axial profiles of the optical emission of various atom and ion lines are measured. Intensities of various lines are maximized at the Mach disk location. The relationship between the location of the Mach disk and the vacuum operating pressure is studied, using a cathetometer to measure small changes in the location of the Mach disk. The effects of aerosol gas flow rate on the intensities of various lines are also investigated. Finally, several schemes for boosting the intensity from the Mach disk will be presented.

  14. Density Measurement of Compact Toroid with Mach-Zehnder Interferometer

    Science.gov (United States)

    Laufman-Wollitzer, Lauren; Endrizzi, Doug; Brookhart, Matt; Flanagan, Ken; Forest, Cary

    2016-10-01

    Utilizing a magnetized coaxial plasma gun (MCPG) built by Tri Alpha Energy, a dense compact toroid (CT) is created and injected at high speed into the Wisconsin Plasma Astrophysics Laboratory (WiPAL) vessel. A modified Mach-Zehnder interferometer from the Line-Tied Reconnection Experiment (LTRX) provides an absolute measurement of electron density. The interferometer is located such that the beam intersects the plasma across the diameter of the MCPG drift region before the CT enters the vessel. This placement ensures that the measurement is taken before the CT expand. Results presented will be used to further analyze characteristics of the CT. Funding provided by DoE, NSF, and WISE Summer Research.

  15. Structure optimization of polymeric Mach-Zehnder rib waveguide

    Institute of Scientific and Technical Information of China (English)

    LU Rong-guo; LiU Yong-zhi; LIAO Jin-kun; LIAO Yi-tao; HAN Wen-jie

    2007-01-01

    A systematic analysis of the polymeric Mach-Zehnder rib waveguide is presented based on the calculation and optimization. The simulation is carried out with the Effective Index Method (EIM) and two-dimensional (2-D)Finite Difference Beam Propagation Method (FD-BPM). The large refractive index step between the consecutive polymer layers is reduced by using EIM and thus the precision of the calculation is ensured. The important parameters of the waveguide such as Y-junction angle and the separation gap are discussed and their relationships with the optical power propagation and the loss characteristics are investigated in this paper. The total loss of the optimized structure is 0.258 dB.

  16. Vibration induced phase noise in Mach-Zehnder atom interferometers

    CERN Document Server

    Miffre, A; Büchner, M; Trénec, G; Vigué, J; Miffre, Alain; Jacquey, Marion; B\\"{u}chner, Matthias; Vigu\\'{e}, Jacques

    2006-01-01

    The high inertial sensitivity of atom interferometers has been used to build accelerometers and gyrometers but this sensitivity makes these interferometers very sensitive to the laboratory seismic noise. This seismic noise induces a phase noise which is large enough to reduce the fringe visibility in many cases. We develop here a model calculation of this phase noise in the case of Mach-Zehnder atom interferometers and we apply this model to our thermal lithium interferometer. We are thus able to explain the observed dependence of the fringe visibility with the diffraction order. The dynamical model developed in the present paper should be very useful to further reduce this phase noise in atom interferometers and this reduction should open the way to improved interferometers.

  17. Unification of Gravity and Electromagnetism I: Mach's Principle and Cosmology

    CERN Document Server

    Ghose, Partha

    2014-01-01

    The phenomenological consequences of unification of Einstein gravity and electromagnetism in an early phase of a Machian universe with a very small and uniform electrical charge density $\\rho_q$ are explored. A form of the Strong Equivalence Principle for unified electrogravity is first formulated, and it immediately leads to (i) the empirical Schuster-Blackett law relating the magnetic moments and angular momenta of neutral astronomical bodies, (ii) an analogous relation between the linear acceleration of neutral massive bodies and associated electric fields, (iii) gravitational lensing in excess of Einstein gravity, and, with the additional assumption of scaling, to (iv) the Wesson relation between the angular momentum and the square of the mass of astronomical bodies. Incorporation of Sciama's version of Mach's principle leads to a new post-Newtonian dynamics (in the weak field limit of gravity alone without electromagnetism) that predicts flat rotation curves of galaxies without the need of dark matter ha...

  18. Mach-Zehnder Interferometer Based on Coupled Dielectric Pillars

    Institute of Scientific and Technical Information of China (English)

    GAO Ding-Shan; HAO Ran; ZHOU Zhi-Ping

    2007-01-01

    We propose a Mach-Zehnder interferometer (MZI) based on coupled dielectric pillars. It is composed of single-row pillar coupled waveguide modulating arms and three-row pillar waveguide 3 dB couplers. The slow light property and transmission loss of the single-row pillar modulating arm are optimized by the plane wave expansion method. A short 3dB coupler is designed based on the modes transformation in three-row pillar waveguide. Finite difference time domain simulations prove the validity of this MZI and show that it has low insertion loss of<1.1 dB and high extinction ratio of>12 dB.

  19. A new magnetic sensor with Mach-Zehnder/Sagnac optical fiber interferometer

    Institute of Scientific and Technical Information of China (English)

    Shuguang LI; Xinwan LI; Xin WANG; Jianping CHEN

    2009-01-01

    This paper presents a new structure for magnetic sensor with Mach-Zehnder/Sagnac optical fiber interferometer. The magnetostrictive optical fiber sensor is placed in one of the two arms of the Mach-Zehnder interferometer, which can detect the optic phase shift by testing the length difference of the arm caused by environmental magnetic field. Because of forward and backward transmission in the arms, the Mach-Zehnder/ Sagnac optical fiber interferometer can deduce twice exactly of the phase shift proportional to the length difference as Mach-Zehnder interferometer. Theoretically, description of the Mach-Zehnder/Sagnac interferometer is given, and some main issues in the magnetic field sensor with optical fiber interferometer are demonstrated with experiments. The magnetic sensors are implemented using the proposed methods.

  20. [Thought Experiments of Economic Surplus: Science and Economy in Ernst Mach's Epistemology].

    Science.gov (United States)

    Wulz, Monika

    2015-03-01

    Thought Experiments of Economic Surplus: Science and Economy in Ernst Mach's Epistemology. Thought experiments are an important element in Ernst Mach's epistemology: They facilitate amplifying our knowledge by experimenting with thoughts; they thus exceed the empirical experience and suspend the quest for immediate utility. In an economical perspective, Mach suggested that thought experiments depended on the production of an economic surplus based on the division of labor relieving the struggle for survival of the individual. Thus, as frequently emphasized, in Mach's epistemology, not only the 'economy of thought' is an important feature; instead, also the socioeconomic conditions of science play a decisive role. The paper discusses the mental and social economic aspects of experimental thinking in Mach's epistemology and examines those within the contemporary evolutionary, physiological, and economic contexts. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. The Choice of Monetary Regime

    DEFF Research Database (Denmark)

    Østrup, Finn

    , a comparisonbetween monetary regimes suggests that welfare is highest under nominalincome targeting where the nominal income target is determined to bring aboutprice stability.Keywords: Monetary regimes; fiscal policy; monetary non-neutrality.JEL classicification: E42, E61, E62.......The article examines how government spending is determined in a closedeconomy where the nominal wage is pre-set through contracts and the wage settershave perfect foresight regarding subsequent policy decisions. The monetaryregime affects government spending because: (i) with a pre-set nominal wage......, agiven change in government spending has different effects on employment andinflation under different monetary regimes, and (ii) the authorities' inclinationto expand government spending is affected by the inflation rate which dependson the monetary regime. If the costs related to inflation are high...

  2. THE ETHIOPIAN ENVIRONMENTAL REGIME VERSUS ...

    African Journals Online (AJOL)

    Haramaya Law Review ... ozone layer and climate change regimes, among others, to succeed. Id. ... international act dealing with general aspects of air pollution. ..... environmental and developmental decisions that affect their interests or the.

  3. Time-dependent simulation and analytical modelling of electronic Mach-Zehnder interferometry with edge-states wave packets

    Science.gov (United States)

    Beggi, Andrea; Bordone, Paolo; Buscemi, Fabrizio; Bertoni, Andrea

    2015-12-01

    We compute the exact single-particle time-resolved dynamics of electronic Mach-Zehnder interferometers based on Landau edge-states transport, and assess the effect of the spatial localization of carriers on the interference pattern. The exact carrier dynamics is obtained by solving numerically the time-dependent Schrödinger equation with a suitable 2D potential profile reproducing the interferometer design. An external magnetic field, driving the system to the quantum Hall regime with filling factor one, is included. The injected carriers are represented by a superposition of edge states, and their interference pattern—controlled via magnetic field and/or area variation—reproduces the one of (Ji et al 2003 Nature 422 415). By tuning the system towards different regimes, we find two additional features in the transmission spectra, both related to carrier localization, namely a damping of the Aharonov-Bohm oscillations with increasing difference in the arms length, and an increased mean transmission that we trace to the energy-dependent transmittance of quantum point contacts. Finally, we present an analytical model, also accounting for the finite spatial dispersion of the carriers, able to reproduce the above effects.

  4. Spectral classification of coupling regimes in the quantum Rabi model

    Science.gov (United States)

    Rossatto, Daniel Z.; Villas-Bôas, Celso J.; Sanz, Mikel; Solano, Enrique

    2017-07-01

    The quantum Rabi model is in the scientific spotlight due to the recent theoretical and experimental progress. Nevertheless, a full-fledged classification of its coupling regimes remains as a relevant open question. We propose a spectral classification dividing the coupling regimes into three regions based on the validity of perturbative criteria on the quantum Rabi model, which allows us the use of exactly solvable effective Hamiltonians. These coupling regimes are (i) the perturbative ultrastrong coupling regime which comprises the Jaynes-Cummings model, (ii) a region where nonperturbative ultrastrong and nonperturbative deep strong coupling regimes coexist, and (iii) the perturbative deep strong coupling regime. We show that this spectral classification depends not only on the ratio between the coupling strength and the natural frequencies of the unperturbed parts, but also on the energy to which the system can access. These regimes additionally discriminate the completely different behaviors of several static physical properties, namely the total number of excitations, the photon statistics of the field, and the cavity-qubit entanglement. Finally, we explain the dynamical properties which are traditionally associated with the deep strong coupling regime, such as the collapses and revivals of the state population, in the frame of the proposed spectral classification.

  5. Advanced geometries and regimes

    Science.gov (United States)

    Bulanov, S. S.; Bulanov, S. V.; Turchetti, G.; Limpouch, J.; Klimo, O.; Psikal, J.; Stockem, A.; Fiuza, F.; Silva, L. O.; Antici, P.; Margarone, D.; Korn, G.

    2013-08-01

    We review and discuss different schemes of laser ion acceleration as well as advanced target geometries in connection with the development of the laser-driven proton source for hadron therapy of oncological diseases, which is a part of the ELIMED project. At the request of the Proceedings Editors and Dr. Stepan Bulanov, University of California, Berkeley, the above article has been updated to include three additional authors: A. Stockem, F. Fiuza, and L. O. Silva. All additional authors have consented to their name being added to the paper. Furthermore, the updated article PDF contains amendments to a number of references as detailed within the pages attached to the end of the updated article PDF file. The updated article was re-published on 8 August 2013.

  6. Experimental investigation of drag reduction by forward facing high speed gas jet for a large angle blunt cone at Mach 8

    Indian Academy of Sciences (India)

    Balla Venukumar; K P J Reddy

    2007-02-01

    Substantial aerodynamic drag, while flying at hypersonic Mach number, due to the presence of strong standing shock wave ahead of a large-angle bluntcone configuration, is a matter of great design concern. Preliminary experimental results for the drag reduction by a forward-facing supersonic air jet for a 60° apex-angle blunt cone at a flow Mach number of 8 are presented in this paper. The measurements are carried out using an accelerometer-based balance system in the hypersonic shock tunnel HST2 of the Indian Institute of Science, Bangalore. About 29% reduction in the drag coefficient has been observed with the injection of a supersonic gas jet.

  7. Boundary-layer transition on blunt slender cones at Mach 10

    Science.gov (United States)

    Bell, R. L.

    1984-08-01

    Investigations of the effects of nose blunting on the location of boundary-layer transition on slender cones at supersonic or hypersonic speeds so back 25 years. For some time it was thought that the movement of the transition point was simply due to the reduction in local Reynolds number associated with the loss in total pressure through the bow shock. More recently, it has been shown that variations in the local transition Reynolds number also occur on a blunt cone and that both these effects must be taken into account in explaining the observed movement in transition along the cone frustum. The present investigation was carried out as a demonstration test for the development of a new capability in Hypervelocity Tunnel 9 at the Naval Surface Weapon Center. The objective of this development effort was to raise the Reynolds number at mach 10 from about 5 x 1000000 per foot to 20 x 1000000 per foot. This was done so that naturally turbulent boundary layers (i.e., without tripping) could be obtained on R/V models. Thus an investigation of boundary layer transition was an appropriate choice for the demonstration test.

  8. Effects of wall cooling and angle of attack on boundary layer transition on sharp cones at free stream Mach 7.4

    Science.gov (United States)

    Mateer, G. G.

    1972-01-01

    Tests were conducted on 5 deg and 15 deg half-angle sharp cones at wall-to-total-temperature ratios of 0.08 to 0.4, and angles of attack from 0 deg to 20 deg. The results indicate that (1) transition Reynolds numbers decrease with decreasing temperature ratio, (2) local transition Reynolds numbers decrease from the windward to the leeward side of the model, and (3) transition data on the windward ray of cones can be correlated in terms of the crossflow velocity gradient, momentum thickness Reynolds number, local Mach number, and cone half-angle.

  9. Intermittent Flow Regimes in a Transonic Fan Airfoil Cascade

    Science.gov (United States)

    Lepicovsky, J.; McFarland, E. R.; Chima, R. V.; Capece, V. R.; Hayden, J.

    2002-01-01

    A study was conducted in the NASA Glenn Research Center linear cascade on the intermittent flow on the suction surface of an airfoil section from the tip region of a modern low aspect ratio fan blade. Experimental results revealed that, at a large incidence angle, a range of transonic inlet Mach numbers exist where the leading-edge shock-wave pattern was unstable. Flush mounted high frequency response pressure transducers indicated large local jumps in the pressure in the leading edge area, which generates large intermittent loading on the blade leading edge. These measurements suggest that for an inlet Mach number between 0.9 and 1.0 the flow is bi-stable, randomly switching between subsonic and supersonic flows. Hence, it appears that the change in overall flow conditions in the transonic region is based on the frequency of switching between two stable flow states rather than on the continuous increase of the flow velocity. To date, this flow behavior has only been observed in a linear transonic cascade. Further research is necessary to confirm this phenomenon occurs in actual transonic fans and is not the byproduct of an endwall restricted linear cascade.

  10. Lubrication regimes in lumbar total disc arthroplasty.

    Science.gov (United States)

    Shaheen, A; Shepherd, D E T

    2007-08-01

    A number of total disc arthroplasty devices have been developed. Some concern has been expressed that wear may be a potential failure mode for these devices, as has been seen with hip arthroplasty. The aim of this paper was to investigate the lubrication regimes that occur in lumbar total disc arthroplasty devices. The disc arthroplasty was modelled as a ball-and-socket joint. Elastohydrodynamic lubrication theory was used to calculate the minimum film thickness of the fluid between the bearing surfaces. The lubrication regime was then determined for different material combinations, size of implant, and trunk velocity. Disc arthroplasties with a metal-polymer or metal-metal material combination operate with a boundary lubrication regime. A ceramic-ceramic material combination has the potential to operate with fluid-film lubrication. Disc arthroplasties with a metal-polymer or metal-metal material combination are likely to generate wear debris. In future, it is worth considering a ceramic-ceramic material combination as this is likely to reduce wear.

  11. MULTILATERAL DIPLOMACY AND INTERNATIONAL REGIMES

    Directory of Open Access Journals (Sweden)

    BENEA Ciprian-Beniamin

    2014-12-01

    Full Text Available The history of diplomacy can by divided in three main periods: one is that of occasional diplomacy peculiar to Middle Ages, while other belong to permane diplomacy, peculiar to modern times. But this one can be divided in two parts, too: one with a bilateral character, previos to 1st World War, and one with a multilateral character, manifested especially after the end on 1st World War. This third type is the focus of present paper. And it cannot be separated from the newly international constructs: international regimes, and international organizations. International instritutions the area where international regimes are belonging to – are legal constructs which provide the formal (and legal framework for continous negotiations. They are the most visible part of the new diplomacy – the one which has a permanent character, and it has an more open face. Anyway, the most important connection has to do with the international institutions, international regimes, and multilateral international negotiations. In the era of the new diplomacy, they all have a permanent character. International institutions help international negotiations carring on; while in their turn, they provide the base for international regimes’ creation, and especially for their evolution. The international regimes’ evolution is an inseparable part of a permanent international framework. And if there is missing a permanent international framework (international organization connected to a specific regime, this regime is a difuse one, its members have only informal relations among them, while they survey each other, looking at their behavior, but they don’t have a formal relationship among them, which could help them solving their future common interests, and protect them from their common fears. International regimes are very important in the era when evrithing touches, and influences everything. In the same time, the complexity of our present world can be successfully

  12. Multiaxis control power from thrust vectoring for a supersonic fighter aircraft model at Mach 0.20 to 2.47

    Science.gov (United States)

    Capone, Francis J.; Bare, E. Ann

    1987-01-01

    The aeropropulsive characteristics of an advanced twin-engine fighter aircraft designed for supersonic cruise have been studied in the Langley 16-Foot Tansonic Tunnel and the Lewis 10- by 10-Foot Supersonic Tunnel. The objective was to determine multiaxis control-power characteristics from thrust vectoring. A two-dimensional convergent-divergent nozzle was designed to provide yaw vector angles of 0, -10, and -20 deg combined with geometric pitch vector angles of 0 and 15 deg. Yaw thrust vectoring was provided by yaw flaps located in the nozzle sidewalls. Roll control was obtained from differential pitch vectoring. This investigation was conducted at Mach numbers from 0.20 to 2.47. Angle of attack was varied from 0 to about 19 deg, and nozzle pressure ratio was varied from about 1 (jet off) to 28, depending on Mach number. Increments in force or moment coefficient that result from pitch or yaw thrust vectoring remain essentially constant over the entire angle-of-attack range of all Mach numbers tested. There was no effect of pitch vectoring on the lateral aerodynamic forces and moments and only very small effects of yaw vectoring on the longitudinal aerodynamic forces and moments. This result indicates little cross-coupling of control forces and moments for combined pitch-yaw vectoring.

  13. The Fall of the Vanishing Interim Regime Hypothesis: Towards a New Paradigm of the Choice of the Exchange Rate Regimes

    OpenAIRE

    Michal Jurek

    2010-01-01

    This paper verifies strong and weak versions of the vanishing interim regime hypothesis (so-called bipolar view). It is shown herein that the strong as well as weak version of this hypothesis can be discredited. Empirical observations support the bipolar view only for the advanced countries, but not for emerging and developing ones. On the contrary – the number of interim regimes, used by emerging and developing countries more than doubled in the 1999–2008 period. Results of the logistic regr...

  14. Great Lakes' regional climate regimes

    Science.gov (United States)

    Kravtsov, Sergey; Sugiyama, Noriyuki; Roebber, Paul

    2016-04-01

    We simulate the seasonal cycle of the Great Lakes' water temperature and lake ice using an idealized coupled lake-atmosphere-ice model. Under identical seasonally varying boundary conditions, this model exhibits more than one seasonally varying equilibrium solutions, which we associate with distinct regional climate regimes. Colder/warmer regimes are characterized by abundant/scarce amounts of wintertime ice and cooler/warmer summer temperatures, respectively. These regimes are also evident in the observations of the Great Lakes' climate variability over recent few decades, and are found to be most pronounced for Lake Superior, the deepest of the Great Lakes, consistent with model predictions. Multiple climate regimes of the Great Lakes also play a crucial role in the accelerated warming of the lakes relative to the surrounding land regions in response to larger-scale global warming. We discuss the physical origin and characteristics of multiple climate regimes over the lakes, as well as their implications for a longer-term regional climate variability.

  15. Receptivity of Boundary Layer over a Blunt Wedge due to Freestream Pulse Disturbances at Mach 6

    Directory of Open Access Journals (Sweden)

    Jianqiang Shi

    2016-01-01

    Full Text Available Direct numerical simulation (DNS of a hypersonic compressible flow over a blunt wedge with fast acoustic disturbances in freestream is performed. The receptivity characteristics of boundary layer to freestream pulse acoustic disturbances are numerically investigated at Mach 6, and the frequency effects of freestream pulse wave on boundary layer receptivity are discussed. Results show that there are several main disturbance mode clusters in boundary layer under acoustic pulse wave, and the number of main disturbance clusters decreases along the streamwise. As disturbance wave propagates from upstream to downstream direction, the component of the modes below fundamental frequency decreases, and the component of the modes above second harmonic components increases quickly in general. There are competition and disturbance energy transfer between different boundary layer modes. The nose boundary layer is dominated by the nearby mode of fundamental frequency. The number of the main disturbance mode clusters decreases as the freestream disturbance frequency increases. The frequency range with larger growth narrows along the streamwise. In general, the amplitudes of both fundamental mode and harmonics become larger with the decreasing of freestream disturbance frequency. High frequency freestream disturbance accelerates the decay of disturbance wave in downstream boundary layer.

  16. Friction Regimes in the Lubricants Solid-State Regime

    NARCIS (Netherlands)

    Schipper, D.J.; Maathuis, O.; Dowson, D.; Taylor, C.M.; Childs, T.H.C.; Dalmaz, G.

    1995-01-01

    Friction measurements were performed in the lubricant's solid-state regime to study the transition from full-film lubrication, in which the separation is maintained by a solidified lubricant, to mixed lubrication. Special attention is paid to the influence of temperature (inlet viscosity) and roughn

  17. On the regimes of premixing

    Energy Technology Data Exchange (ETDEWEB)

    Angelini, S.; Theofanous, T.G.; Yuen, W.W. [California Univ., Santa Barbara, CA (United States). Center for Risk Studies and Safety

    1998-01-01

    The conditions of the MAGICO-2000 experiment are extended to more broadly investigate the regimes of premixing, and the corresponding internal structures of mixing zones. With the help of the data and numerical simulations using the computer code PM-ALPHA, we can distinguish extremes of behavior dominated by inertia and thermal effects - we name these the inertia and thermal regimes, respectively. This is an important distinction that should guide future experiments aimed at code verification in this area. Interesting intermediate behaviors are also delineated and discussed. (author)

  18. X-33 Attitude Control System Design for Ascent, Transition, and Entry Flight Regimes

    Science.gov (United States)

    Hall, Charles E.; Gallaher, Michael W.; Hendrix, Neal D.

    1998-01-01

    The Vehicle Control Systems Team at Marshall Space Flight Center, Systems Dynamics Laboratory, Guidance and Control Systems Division is designing under a cooperative agreement with Lockheed Martin Skunkworks, the Ascent, Transition, and Entry flight attitude control system for the X-33 experimental vehicle. Ascent flight control begins at liftoff and ends at linear aerospike main engine cutoff (NECO) while Transition and Entry flight control begins at MECO and concludes at the terminal area energy management (TAEM) interface. TAEM occurs at approximately Mach 3.0. This task includes not only the design of the vehicle attitude control systems but also the development of requirements for attitude control system components and subsystems. The X-33 attitude control system design is challenged by a short design cycle, the design environment (Mach 0 to about Mach 15), and the X-33 incremental test philosophy. The X-33 design-to-launch cycle of less than 3 years requires a concurrent design approach while the test philosophy requires design adaptation to vehicle variations that are a function of Mach number and mission profile. The flight attitude control system must deal with the mixing of aerosurfaces, reaction control thrusters, and linear aerospike engine control effectors and handle parasitic effects such as vehicle flexibility and propellant sloshing from the uniquely shaped propellant tanks. The attitude control system design is, as usual, closely linked to many other subsystems and must deal with constraints and requirements from these subsystems.

  19. Highly stable polarization independent Mach-Zehnder interferometer

    Energy Technology Data Exchange (ETDEWEB)

    Mičuda, Michal, E-mail: micuda@optics.upol.cz; Doláková, Ester; Straka, Ivo; Miková, Martina; Dušek, Miloslav; Fiurášek, Jaromír; Ježek, Miroslav, E-mail: jezek@optics.upol.cz [Department of Optics, Faculty of Science, Palacký University, 17. listopadu 1192/12, 77146 Olomouc (Czech Republic)

    2014-08-15

    We experimentally demonstrate optical Mach-Zehnder interferometer utilizing displaced Sagnac configuration to enhance its phase stability. The interferometer with footprint of 27×40 cm offers individually accessible paths and shows phase deviation less than 0.4° during a 250 s long measurement. The phase drift, evaluated by means of Allan deviation, stays below 3° or 7 nm for 1.5 h without any active stabilization. The polarization insensitive design is verified by measuring interference visibility as a function of input polarization. For both interferometer's output ports and all tested polarization states the visibility stays above 93%. The discrepancy in visibility for horizontal and vertical polarization about 3.5% is caused mainly by undesired polarization dependence of splitting ratio of the beam splitter used. The presented interferometer device is suitable for quantum-information and other sensitive applications where active stabilization is complicated and common-mode interferometer is not an option as both the interferometer arms have to be accessible individually.

  20. Ultra-Abrupt Tapered Fiber Mach-Zehnder Interferometer Sensors

    Directory of Open Access Journals (Sweden)

    Lanying Zhou

    2011-05-01

    Full Text Available A fiber inline Mach-Zehnder interferometer (MZI consisting of ultra-abrupt fiber tapers was fabricated through a new fusion-splicing method. By fusion-splicing, the taper diameter-length ratio is around 1:1, which is much greater than those (1:10 made by stretching. The proposed fabrication method is very low cost, 1/20–1/50 of those of LPFG pair MZI sensors. The fabricated MZIs are applied to measure refractive index, temperature and rotation angle changes. The temperature sensitivity of the MZI at a length of 30 mm is 0.061 nm/°C from 30–350 °C. The proposed MZI is also used to measure rotation angles ranging from 0° to 0.55°; the sensitivity is 54.98 nm/°. The refractive index sensitivity is improved by 3–5 fold by fabricating an inline micro–trench on the fiber cladding using a femtosecond laser. Acetone vapor of 50 ppm in N2 is tested by the MZI sensor coated with MFI–type zeolite thin film. The proposed MZI sensors are capable of in situ detection in many areas of interest such as environmental management, industrial process control, and public health.

  1. Ultra-abrupt tapered fiber Mach-Zehnder interferometer sensors.

    Science.gov (United States)

    Li, Benye; Jiang, Lan; Wang, Sumei; Zhou, Lanying; Xiao, Hai; Tsai, Hai-Lung

    2011-01-01

    A fiber inline Mach-Zehnder interferometer (MZI) consisting of ultra-abrupt fiber tapers was fabricated through a new fusion-splicing method. By fusion-splicing, the taper diameter-length ratio is around 1:1, which is much greater than those (1:10) made by stretching. The proposed fabrication method is very low cost, 1/20-1/50 of those of LPFG pair MZI sensors. The fabricated MZIs are applied to measure refractive index, temperature and rotation angle changes. The temperature sensitivity of the MZI at a length of 30 mm is 0.061 nm/°C from 30-350 °C. The proposed MZI is also used to measure rotation angles ranging from 0° to 0.55°; the sensitivity is 54.98 nm/°. The refractive index sensitivity is improved by 3-5 fold by fabricating an inline micro-trench on the fiber cladding using a femtosecond laser. Acetone vapor of 50 ppm in N(2) is tested by the MZI sensor coated with MFI-type zeolite thin film. The proposed MZI sensors are capable of in situ detection in many areas of interest such as environmental management, industrial process control, and public health.

  2. Monetary regimes in open economies

    NARCIS (Netherlands)

    Korpos, A.

    2006-01-01

    This thesis presents a two-country open economy framework for the analysis of strategic interactions among monetary authorities and wage bargaining institutions. From this perspective, the thesis investigates the economic consequences of replacing flexible and fixed exchange rate regimes with a mone

  3. Digital integrated control of a Mach 2.5 mixed-compression supersonic inlet and an augmented mixed-flow turbofan engine

    Science.gov (United States)

    Batterton, P. G.; Arpasi, D. J.; Baumbick, R. J.

    1974-01-01

    A digitally implemented integrated inlet-engine control system was designed and tested on a mixed-compression, axisymmetric, Mach 2.5, supersonic inlet with 45 percent internal supersonic area contraction and a TF30-P-3 augmented turbofan engine. The control matched engine airflow to available inlet airflow. By monitoring inlet terminal shock position and over-board bypass door command, the control adjusted engine speed so that in steady state, the shock would be at the desired location and the overboard bypass doors would be closed. During engine-induced transients, such as augmentor light-off and cutoff, the inlet operating point was momentarily changed to a more supercritical point to minimize unstarts. The digital control also provided automatic inlet restart. A variable inlet throat bleed control, based on throat Mach number, provided additional inlet stability margin.

  4. A hybrid pressure-density-based Mach uniform algorithm for 2D Euler equations on unstructured grids by using multi-moment finite volume method

    Science.gov (United States)

    Xie, Bin; Deng, Xi; Sun, Ziyao; Xiao, Feng

    2017-04-01

    We propose a novel Mach-uniform numerical model for 2D Euler equations on unstructured grids by using multi-moment finite volume method. The model integrates two key components newly developed to solve compressible flows on unstructured grids with improved accuracy and robustness. A new variant of AUSM scheme, so-called AUSM+-pcp (AUSM+ with pressure-correction projection), has been devised including a pressure-correction projection to the AUSM+ flux splitting, which maintains the exact numerical conservativeness and works well for all Mach numbers. A novel 3th-order, non-oscillatory and less-dissipative reconstruction has been proposed by introducing a multi-dimensional limiting and a BVD (boundary variation diminishing) treatment to the VPM (volume integrated average (VIA) and point value (PV) based multi-moment) reconstruction. The resulting reconstruction scheme, the limited VPM-BVD formulation, is able to resolve both smooth and non-smooth solutions with high fidelity. Benchmark tests have been used to verify the present model. The numerical results substantiate the present model as an accurate and robust unstructured-grid formulation for flows of all Mach numbers.

  5. Wavelength conversion based on cross-phase modulation in a semiconductor Mach-Zehnder modulator

    DEFF Research Database (Denmark)

    Liu, Fenghai; Zheng, Xueyan; Oxenløwe, Leif Katsuo

    2001-01-01

    Wavelength conversion based on cross-phase modulation in a reversely biased semiconductor Mach-Zehnder modulator is proposed and successfully demonstrated in a commercial device. The converted signals exhibit extinction ratio >13 dB and penalty......Wavelength conversion based on cross-phase modulation in a reversely biased semiconductor Mach-Zehnder modulator is proposed and successfully demonstrated in a commercial device. The converted signals exhibit extinction ratio >13 dB and penalty...

  6. Structural design and analysis of a Mach zero to five turbo-ramjet system

    Science.gov (United States)

    Spoth, Kevin A.; Moses, Paul L.

    1993-01-01

    The paper discusses the structural design and analysis of a Mach zero to five turbo-ramjet propulsion system for a Mach five waverider-derived cruise vehicle. The level of analysis detail necessary for a credible conceptual design is shown. The results of a finite-element failure mode sizing analysis for the engine primary structure is presented. The importance of engine/airframe integration is also discussed.

  7. [Investigation of Empiricism. On Ernst Mach's Conception of the Thought Experiment].

    Science.gov (United States)

    Krauthausen, Karin

    2015-03-01

    Investigation of Empiricism. On Ernst Mach's Conception of the Thought Experiment. The paper argues that Ernst Mach's conception of the thought experiment from 1897/1905 holds a singular position in the lively discussions and repeated theorizations that have continued up to the present in relation to this procedure. Mach derives the thought experiment from scientific practice, and does not oppose it to the physical experiment, but, on the contrary, endows it with a robust relation to the facts. For Mach, the thought experiment is a reliable means of determining empiricism, and at the same time a real, because open and unbiased, experimenting. To shed light on this approach, the paper carries out a close reading of the relevant texts in Mach's body of writings (in their different stages of revision) and proceeds in three steps: first, Mach's processual understanding of science will be presented, which also characterizes his research and publication practice (I. 'Aperçu' and 'Sketch'. Science as Process and Projection); then in a second step the physiological and biological justification and valorization of memory and association will be examined with which Mach limits the relevance of categories such as consciousness and will (II. The Biology of Consciousness. Or The Polyp Colony); against this background, thirdly, the specific empiricism can be revealed that Mach inscribes into the thought experiment by on the one hand founding it in the memory and association, and on the other by tracing it back to geometry, which he deploys as an experimenting oriented to experience (III. Thinking and Experience. The Thought Experiment). © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Mach Cutoff Analysis and Results from NASA's Farfield Investigation of No-Boom Thresholds

    Science.gov (United States)

    Cliatt, Larry J., II; Hill, Michael A.; Haering, Edward A., Jr.

    2016-01-01

    In support of the ongoing effort by the National Aeronautics and Space Administration (NASA) to bring supersonic commercial travel to the public, the NASA Armstrong Flight Research Center and the NASA Langley Research Center, in partnership with other industry organizations and academia, conducted a flight research experiment to analyze acoustic propagation in the Mach cutoff shadow zone. The effort was conducted in the fall of 2012 and named the Farfield Investigation of No-boom Thresholds (FaINT). The test helped to build a dataset that will go toward further understanding of the unique acoustic propagation characteristics below Mach cutoff altitude. FaINT was able to correlate sonic boom noise levels measured below cutoff altitude with precise airplane flight conditions, potentially increasing the accuracy over previous studies. A NASA F-18B airplane made supersonic passes such that its Mach cutoff caustic would be at varying distances above a linear 60-microphone, 7375-ft (2247.9 m) long array. A TG-14 motor glider equipped with a microphone on its wing-tip also attempted to capture the same sonic boom waves above ground, but below the Mach cutoff altitude. This paper identified an appropriate metric for sonic boom waveforms in the Mach cutoff shadow zone called Perceived Sound Exposure Level; derived an empirical relationship between Mach cutoff flight conditions and noise levels in the shadow zone; validated a safe cutoff altitude theory presented by previous studies; analyzed the sensitivity of flight below Mach cutoff to unsteady atmospheric conditions and realistic aircraft perturbations; and demonstrated the ability to record sonic boom measurements over 5000 ft (1524.0 m) above ground level, but below Mach cutoff altitude.

  9. An experimental investigation of a Mach 3.0 high-speed civil transport at supersonic speeds

    Science.gov (United States)

    Hernandez, Gloria; Covell, Peter F.; Mcgraw, Marvin E., Jr.

    1993-01-01

    An experimental study was conducted to determine the aerodynamic characteristics of a proposed high speed civil transport. This configuration was designed to cruise at Mach 3.0 and sized to carry 250 passengers for 6500 n.mi. The configuration consists of a highly blended wing body and features a blunt parabolic nose planform, a highly swept inboard wing panel, a moderately swept outboard wing panel, and a curved wingtip. Wind tunnel tests were conducted in the Langley Unitary Plan Wind Tunnel on a 0.0098-scale model. Force, moment, and pressure data were obtained for Mach numbers ranging from 1.6 to 3.6 and at angles of attack ranging from -4 to 10 deg. Extensive flow visualization studies (vapor screen and oil flow) were obtained in the experimental program. Both linear and advanced computational fluid dynamics (CFD) theoretical comparisons are shown to assess the ability to predict forces, moments, and pressures on configurations of this type. In addition, an extrapolation of the wind tunnel data, based on empirical principles, to full-scale conditions is compared with the theoretical aerodynamic predictions.

  10. Beyond the Knudsen number: assessing thermodynamic non-equilibrium in gas flows

    CERN Document Server

    Meng, Jianping; Reese, Jason M; Zhang, Yonghao

    2012-01-01

    For more than 150 years the Navier-Stokes equations for thermodynamically quasi-equilibrium flows have been the cornerstone of modern computational fluid dynamics that underpins new fluid technologies. However, the applicable regime of the Navier-Stokes model in terms of the level of thermodynamic non-equilibrium in the local flowfield is not clear especially for hypersonic and low-speed micro/nano flows. Here, we re-visit the Navier-Stokes model in the framework of Boltzmann statistics, and propose a new and more appropriate way of assessing non-equilibrium in the local flowfield, and the corresponding appropriateness of the Navier-Stokes model. Our theoretical analysis and numerical simulations confirm our proposed method. Through molecular dynamics simulations we reveal that the commonly-used Knudsen number, or a parametric combination of Knudsen and Mach numbers, may not be sufficient to accurately assess the departure of flowfields from equilibrium, and the applicability of the Navier-Stokes model.

  11. Revisiting Einstein's Happiest Thought: On Ernst Mach and the Early History of Relativity

    Science.gov (United States)

    Staley, Richard

    2016-03-01

    This paper argues we should distinguish three phases in the formation of relativity. The first involved relational approaches to perception, and physiological and geometrical space and time in the 1860s and 70s. The second concerned electrodynamics and mechanics (special relativity). The third concerned mechanics, gravitation, and physical and geometrical space and time. Mach's early work on the Doppler effect, together with studies of visual and motor perception linked physiology, physics and psychology, and offered new approaches to physiological space and time. These informed the critical conceptual attacks on Newtonian absolutes that Mach famously outlined in The Science of Mechanics. Subsequently Mach identified a growing group of ``relativists,'' and his critiques helped form a foundation for later work in electrodynamics (in which he did not participate). Revisiting Mach's early work will suggest he was still more important to the development of new approaches to inertia and gravitation than has been commonly appreciated. In addition to what Einstein later called ``Mach's principle,'' I will argue that a thought experiment on falling bodies in Mach's Science of Mechanics also provided a point of inspiration for the happy thought that led Einstein to the equivalence principle.

  12. Design of all-optical multi-level regenerators based on Mach-Zehnder interferometer

    Science.gov (United States)

    Kong, Xiangjian; Wu, Baojian; Zhou, Xingyu; Wan, Qingyao; Jiang, Shanglong; Wen, Feng; Qiu, Kun

    2016-12-01

    We propose a design method for all-optical multi-level regenerators by mimicking the normalized power transfer function (PTF) in the first-order approximation to the ideal step-like PTF, in which a key step is to appropriately select the amplitude and phase conditions of Mach-Zehnder-interferometer (MZI)-based regenerators. As an example, we describe the design process of the self-phase-modulation (SPM)-based MZI regenerator constructed by a section of nonlinear fiber and an optical phase shifter (OPS). It is shown that the parameter of reference power level (RPL) can be regarded as the upper limit of input power, which is useful for the measure of the multi-level regeneration performance. The number of regenerative power levels increases with the RPL parameter. For 4-level pulse amplitude modulated (4PAM) optical signals degraded by the Gaussian noises with the standard deviation of 0.02, the SPM-based MZI regenerator has an average noise reduction ratio (NRR) of 6.5 dB, better than that of 1st-order regenerator by about 5 dB.

  13. Unsteadiness of a shock train in Mach 2.0 flow

    Science.gov (United States)

    Hunt, Robin; Driscoll, James; Gamba, Mirko

    2016-11-01

    Experimental observations of the progression of flow unsteadiness within a shock train are presented. A downstream control valve is used to generate a shock train in the constant area test section of a wind tunnel with a freestream Mach number of 2.0. Even with nominally constant boundary conditions the shock train exhibits inherent unsteady motion about the time average position. At the conditions presented the shocks can be displaced by up to 0.35 duct heights. Better knowledge of the shock train's dynamics may allow us to introduce control algorithms to reduce the system's unsteadiness and thus minimize the associated mechanical and thermal loads. An edge detection algorithm is applied to the instantaneous frames of high speed Schlieren movies to track the location of morphological features within the shock system. Simultaneously, high speed pressure transducers record the pressure fluctuations along the bottom wall of the duct. The results indicate a complex frequency dependent dynamical system. A strong component of the dynamics involves a disturbance traveling upstream through the boundary layer. Once the disturbance reaches the leading shock foot the shocks respond in order with the most upstream shock moving first.

  14. Effects of Fin Leading Edge Sweep on Shock-Shock Interaction at Mach 6

    Science.gov (United States)

    Berry, Scott A.; Nowak, Robert J.

    1996-01-01

    The effects of fin leading edge sweep on peak heating rates due to shock-shock interaction have been experimentally examined in the Langley 20-Inch Mach 6 Tunnel. The shock interaction was produced by the intersection of a planar incident shock (16.8 deg shock angle relative to the freestream, generated by a 9 deg wedge) with the bow shock formed around a O.5-inch diameter cylindrical leading edge fin. Heating distributions along the leading edge stagnation line have been obtained using densely spaced thin film resistive-type sensors. Schlieren images were obtained to illustrate the very complex shock-shock interactions. The fin leading edge sweep angle was varied from 15-degrees swept back to 45-degrees swept forward for a freestream unit Reynolds number of 2 x 10(exp 6)/ft. Two models were utilized during the study, one with 0.025-inch spacing between gage centers, and the other 0.015-inch spacing. Gage spatial resolution on the order of 0.015-in appeared to accurately capture the narrow spike in heating. Peak heating due to shock interaction was maximized when the fin was swept forward 15 deg and 25 deg, both promoting augmentations about 7 times the baseline value. The schlieren images for these cases revealed Type 4 and Type 3 interactions, respectively.

  15. Exchange rate regimes and monetary arrangements

    Directory of Open Access Journals (Sweden)

    Ivan Ribnikar

    2005-06-01

    Full Text Available There is a close relationship between a country’s exchange rate regime and monetary arrangement and if we are to examine monetary arrangements then exchange rate regimes must first be analysed. Within the conventional and most widely used classification of exchange rate regimes into rigid and flexible or into polar regimes (hard peg and float on one side, and intermediate regimes on the other there, is a much greater variety among intermediate regimes. A more precise and, as will be seen, more useful classification of exchange rate regimes is the first topic of the paper. The second topic is how exchange rate regimes influence or determine monetary arrangements and monetary policy or monetary policy regimes: monetary autonomy versus monetary nonautonomy and discretion in monetary policy versus commitment in monetary policy. Both topics are important for countries on their path to the EU and the euro area

  16. The Concept of Truth Regime

    Directory of Open Access Journals (Sweden)

    Lorna Weir

    2008-07-01

    Full Text Available “Truth regime” is a much used but little theorized concept, with the Foucauldian literature presupposing that truth in modernity is uniformly scientific/quasi-scientific and enhances power. I argue that the forms of truth characteristic of our present are wider than Foucault recognized, their relations to power more various, and their historicity more complex. The truth regime of advanced modernity is characterized by multiple, irreducible truth formulae that co-exist and sometimes vie for dominance. A truth formula stabilizes a network of elements: a relation between representation and presentation (words and things, truth and non-truth, and the place of the subject in discourse. Our contemporary truth regime comprises radically heterogeneous truthful knowledges – science, governance, religion/politics, and common culture – that have distinct histories and relations to power.

  17. Detecting spatial regimes in ecosystems

    Science.gov (United States)

    Sundstrom, Shana M.; Eason, Tarsha; Nelson, R. John; Angeler, David G.; Barichievy, Chris; Garmestani, Ahjond S.; Graham, Nicholas A.J.; Granholm, Dean; Gunderson, Lance; Knutson, Melinda; Nash, Kirsty L.; Spanbauer, Trisha; Stow, Craig A.; Allen, Craig R.

    2017-01-01

    Research on early warning indicators has generally focused on assessing temporal transitions with limited application of these methods to detecting spatial regimes. Traditional spatial boundary detection procedures that result in ecoregion maps are typically based on ecological potential (i.e. potential vegetation), and often fail to account for ongoing changes due to stressors such as land use change and climate change and their effects on plant and animal communities. We use Fisher information, an information theory-based method, on both terrestrial and aquatic animal data (U.S. Breeding Bird Survey and marine zooplankton) to identify ecological boundaries, and compare our results to traditional early warning indicators, conventional ecoregion maps and multivariate analyses such as nMDS and cluster analysis. We successfully detected spatial regimes and transitions in both terrestrial and aquatic systems using Fisher information. Furthermore, Fisher information provided explicit spatial information about community change that is absent from other multivariate approaches. Our results suggest that defining spatial regimes based on animal communities may better reflect ecological reality than do traditional ecoregion maps, especially in our current era of rapid and unpredictable ecological change.

  18. Hydrodynamic interaction of swimming organisms in an inertial regime

    Science.gov (United States)

    Li, Gaojin; Ostace, Anca; Ardekani, Arezoo M.

    2016-11-01

    We numerically investigate the hydrodynamic interaction of swimming organisms at small to intermediate Reynolds number regimes, i.e., Re˜O (0.1 -100 ) , where inertial effects are important. The hydrodynamic interaction of swimming organisms in this regime is significantly different from the Stokes regime for microorganisms, as well as the high Reynolds number flows for fish and birds, which involves strong flow separation and detached vortex structures. Using an archetypal swimmer model, called a "squirmer," we find that the inertial effects change the contact time and dispersion dynamics of a pair of pusher swimmers, and trigger hydrodynamic attraction for two pullers. These results are potentially important in investigating predator-prey interactions, sexual reproduction, and the encounter rate of marine organisms such as copepods, ctenophora, and larvae.

  19. Do family policy regimes matter for children's well-being?

    Science.gov (United States)

    Engster, Daniel; Stensöta, Helena Olofsdotter

    2011-01-01

    Researchers have studied the impact of different welfare state regimes, and particularly family policy regimes, on gender equality. Very little research has been conducted, however, on the association between different family policy regimes and children's well-being. This article explores how the different family policy regimes of twenty OECD countries relate to children's well-being in the areas of child poverty, child mortality, and educational attainment and achievement. We focus specifically on three family policies: family cash and tax benefits, paid parenting leaves, and public child care support. Using panel data for the years 1995, 2000, and 2005, we test the association between these policies and child well-being while holding constant for a number of structural and policy variables. Our analysis shows that the dual-earner regimes, combining high levels of support for paid parenting leaves and public child care, are strongly associated with low levels of child poverty and child mortality. We find little long-term effect of family policies on educational achievement, but a significant positive correlation between high family policy support and higher educational attainment. We conclude that family policies have a significant impact on improving children's well-being, and that dual-earner regimes represent the best practice for promoting children's health and development.

  20. Investigation of Inlet Control Parameters for an External-internal-compression Inlet from Mach 2.1 to 3.0

    Science.gov (United States)

    Anderson, B. H.; Bowditch, D. N.

    1958-01-01

    Investigation of the control parameters of an external-internal compression inlet indicates that the cowl-lip shock provides a signal to position the spike and to start the inlet over a Mach number range from 2.1 to 3.0. Use of a single fixed probe position to control the spike over the range of conditions resulted in a 3.7-count loss in total-pressure recovery at Mach 3.0 and 0 deg angle of attack. Three separate shock-sensing-probe positions were required to set the spike for peak recovery from Mach 2.1 to 3.0 and angles of attack from 0 deg to 6 deg. When the inlet was unstarted, an erroneous signal was obtained from the normal-shock control through most of the starting cycle that prevented the inlet from starting. Therefore, it was necessary to over-ride the normal-shock control signal and not allow the control to position the terminal shock until the spike was positioned.

  1. Computational and Experimental Characterization of the Mach 6 Facility Nozzle Flow for the Enhanced Injection and Mixing Project at NASA Langley Research Center

    Science.gov (United States)

    Drozda, Tomasz G.; Cabell, Karen F.; Passe, Bradley J.; Baurle, Robert A.

    2017-01-01

    Computational fluid dynamics analyses and experimental data are presented for the Mach 6 facility nozzle used in the Arc-Heated Scramjet Test Facility for the Enhanced Injection and Mixing Project (EIMP). This project, conducted at the NASA Langley Research Center, aims to investigate supersonic combustion ramjet (scramjet) fuel injection and mixing physics relevant to flight Mach numbers greater than 8. The EIMP experiments use a two-dimensional Mach 6 facility nozzle to provide the high-speed air simulating the combustor entrance flow of a scramjet engine. Of interest are the physical extent and the thermodynamic properties of the core flow at the nozzle exit plane. The detailed characterization of this flow is obtained from three-dimensional, viscous, Reynolds-averaged simulations. Thermodynamic nonequilibrium effects are also investigated. The simulations are compared with the available experimental data, which includes wall static pressures as well as in-stream static pressure, pitot pressure and total temperature obtained via in-stream probes positioned just downstream of the nozzle exit plane.

  2. Sagan numbers

    OpenAIRE

    Mendonça, J. Ricardo G.

    2012-01-01

    We define a new class of numbers based on the first occurrence of certain patterns of zeros and ones in the expansion of irracional numbers in a given basis and call them Sagan numbers, since they were first mentioned, in a special case, by the North-american astronomer Carl E. Sagan in his science-fiction novel "Contact." Sagan numbers hold connections with a wealth of mathematical ideas. We describe some properties of the newly defined numbers and indicate directions for further amusement.

  3. Fibonacci numbers

    CERN Document Server

    Vorob'ev, Nikolai Nikolaevich

    2011-01-01

    Fibonacci numbers date back to an 800-year-old problem concerning the number of offspring born in a single year to a pair of rabbits. This book offers the solution and explores the occurrence of Fibonacci numbers in number theory, continued fractions, and geometry. A discussion of the ""golden section"" rectangle, in which the lengths of the sides can be expressed as a ration of two successive Fibonacci numbers, draws upon attempts by ancient and medieval thinkers to base aesthetic and philosophical principles on the beauty of these figures. Recreational readers as well as students and teacher

  4. Number names and number understanding

    DEFF Research Database (Denmark)

    Ejersbo, Lisser Rye; Misfeldt, Morten

    2014-01-01

    through using mathematical names for the numbers such as one-ten-one for 11 and five-ten-six for 56. The project combines the renaming of numbers with supporting the teaching with the new number names. Our hypothesis is that Danish children have more difficulties learning and working with numbers, because...... the Danish number names are more complicated than in other languages. Keywords: A research project in grade 0 and 1th in a Danish school, Base-10 system, two-digit number names, semiotic, cognitive perspectives....

  5. Variety of synchronous regimes in neuronal ensembles

    Science.gov (United States)

    Komarov, M. A.; Osipov, G. V.; Suykens, J. A. K.

    2008-09-01

    We consider a Hodgkin-Huxley-type model of oscillatory activity in neurons of the snail Helix pomatia. This model has a distinctive feature: It demonstrates multistability in oscillatory and silent modes that is typical for the thalamocortical neurons. A single neuron cell can demonstrate a variety of oscillatory activity: Regular and chaotic spiking and bursting behavior. We study collective phenomena in small and large arrays of nonidentical cells coupled by models of electrical and chemical synapses. Two single elements coupled by electrical coupling show different types of synchronous behavior, in particular in-phase and antiphase synchronous regimes. In an ensemble of three inhibitory synaptically coupled elements, the phenomenon of sequential synchronous dynamics is observed. We study the synchronization phenomena in the chain of nonidentical neurons at different oscillatory behavior coupled with electrical and chemical synapses. Various regimes of phase synchronization are observed: (i) Synchronous regular and chaotic spiking; (ii) synchronous regular and chaotic bursting; and (iii) synchronous regular and chaotic bursting with different numbers of spikes inside the bursts. We detect and study the effect of collective synchronous burst generation due to the cluster formation and the oscillatory death.

  6. A Mach-Zender Holographic Microscope for Quantifying Bacterial Motility

    Science.gov (United States)

    Niraula, B.; Nadeau, J. L.; Serabyn, E.; Wallace, J. K.; Liewer, K.; Kuhn, J.; Graff, E.; Lindensmith, C.

    2014-12-01

    New microscopic techniques have revolutionized cell biology over the past two decades. However, there are still biological processes whose details elude us, especially those involving motility: e.g. feeding behavior of microorganisms in the ocean, or migration of cancer cells to form metastases. Imaging prokaryotes, which range in size from several hundred nm to a few microns, is especially challenging. An emerging technique to address these issues is Digital Holographic Microscopy (DHM). DHM is an imaging technique that uses the interference of light to record and reproduce three-dimensional magnified images of objects. This approach has several advantages over ordinary brightfield microscopy for fieldwork: a larger depth of field, hands-off operation, robustness regarding environmental conditions, and large sampling volumes with quantitative 3D records of motility behavior. Despite these promising features, real-time DHM was thought to be impractical for technological and computational reasons until recently, and there has so far been very limited application of DHM to biology. Most existing instruments are limited in performance by their particular (e.g. in-line, lens-less, phase-shifting) approach to holography. These limitations can be mitigated with an off-axis dual-path configuration. Here we describe the design and implementation of a design for a Mach-Zehnder-type holographic microscope with diffraction-limited lateral resolution, with intended applications in environmental microbiology. We have achieved sub-micron resolution and three-dimensional tracking of prokaryotic and eukaryotic test strains designed to represent different modes and speeds of microbial motility. Prokaryotes are Escherichia coli, Vibrio alginolyticus, and Bacillus subtilis. Each shows a characteristic motility pattern, as we illustrate in holographic videos in sample chambers 0.6 mm in depth. The ability to establish gradients of attractants with bacterial taxis towards the

  7. Early signatures of regime shifts in complex dynamical systems

    Indian Academy of Sciences (India)

    Indrani Bose; Mainak Pal

    2015-02-01

    A large number of studies have recently been carried out on the early signatures of regime shifts in a number of dynamical systems, e.g., ecosystems, the climate, fish and wildlife populations, financial markets, complex diseases and gene circuits. The underlying model in most cases is that of the fold-bifurcation in which a sudden regime shift occurs at a bifurcation point. The shift involves a discontinuous jump from one type of stable steady state to another. The dynamics of natural systems have both deterministic and stochastic components. The early signatures of abrupt regime shifts include the critical slowing down as a transition point is approached, rising variance and the lag-1 autocorrelation function, increased skewness of the steady-state probability distribution and the ratio of two mean first passage times for the exits from the stable steady states as the bifurcation point is approached. Noise-induced regime shifts are also possible for which the vicinity of the bifurcation point is not essential. In this paper, we review examples of regime shifts in natural systems and the associated early signatures. We further discuss how such approaches provide useful insights on a cell biological process involving the fold-bifurcation.

  8. Ranking Regime and the Future of Vernacular Scholarship

    Science.gov (United States)

    Ishikawa, Mayumi

    2014-01-01

    World university rankings and their global popularity present a number of far-reaching impacts for vernacular scholarship. This article employs a multidimensional approach to analyze the ranking regime's threat to local scholarship and knowledge construction through a study of Japanese research universities. First, local conditions that have led…

  9. Scaling regimes in spherical shell rotating convection

    CERN Document Server

    Gastine, T; Aubert, J

    2016-01-01

    Rayleigh-B\\'enard convection in rotating spherical shells can be considered as a simplified analogue of many astrophysical and geophysical fluid flows. Here, we use three-dimensional direct numerical simulations to study this physical process. We construct a dataset of more than 200 numerical models that cover a broad parameter range with Ekman numbers spanning $3\\times 10^{-7} \\leq E \\leq 10^{-1}$, Rayleigh numbers within the range $10^3 < Ra < 2\\times 10^{10}$ and a Prandtl number unity. We investigate the scaling behaviours of both local (length scales, boundary layers) and global (Nusselt and Reynolds numbers) properties across various physical regimes from onset of rotating convection to weakly-rotating convection. Close to critical, the convective flow is dominated by a triple force balance between viscosity, Coriolis force and buoyancy. For larger supercriticalities, a subset of our numerical data approaches the asymptotic diffusivity-free scaling of rotating convection $Nu\\sim Ra^{3/2}E^{2}$ in ...

  10. Eulerian numbers

    CERN Document Server

    Petersen, T Kyle

    2015-01-01

    This text presents the Eulerian numbers in the context of modern enumerative, algebraic, and geometric combinatorics. The book first studies Eulerian numbers from a purely combinatorial point of view, then embarks on a tour of how these numbers arise in the study of hyperplane arrangements, polytopes, and simplicial complexes. Some topics include a thorough discussion of gamma-nonnegativity and real-rootedness for Eulerian polynomials, as well as the weak order and the shard intersection order of the symmetric group. The book also includes a parallel story of Catalan combinatorics, wherein the Eulerian numbers are replaced with Narayana numbers. Again there is a progression from combinatorics to geometry, including discussion of the associahedron and the lattice of noncrossing partitions. The final chapters discuss how both the Eulerian and Narayana numbers have analogues in any finite Coxeter group, with many of the same enumerative and geometric properties. There are four supplemental chapters throughout, ...

  11. Hydrogen film cooling with incident and swept-shock interactions in a Mach 6.4 nitrogen free stream

    Science.gov (United States)

    Olsen, George C.; Nowak, Robert J.

    1995-01-01

    The effectiveness of slot film cooling of a flat plate in a Mach 6.4 flow with and without incident and swept oblique shock interactions was experimentally investigated. Hydrogen was the primary coolant gas, although some tests were conducted using helium as the coolant. Tests were conducted in the Calspan 48-Inch Shock Tunnel with a nitrogen flow field to preclude combustion of the hydrogen coolant gas. A two-dimensional highly instrumented model developed in a previous test series was used. Parameters investigated included coolant mass flow rate, coolant gas, local free-stream Reynolds number, incident oblique shock strength, and a swept oblique shock. Both gases were highly effective coolants in undisturbed flow; however, both incident and swept shocks degraded that effectiveness.

  12. Experimental results of a Mach 10 conical-flow derived waverider to 14-X hypersonic aerospace vehicle

    Directory of Open Access Journals (Sweden)

    Tiago Cavalcanti Rolim

    2011-05-01

    Full Text Available This paper presents a research in the development of the 14-X hypersonic airspace vehicle at Institute for Advanced Studies (IEAv from Department of Science and Aerospace Technology (DCTA of the Brazilian Air Force (FAB. The 14-X project objective is to develop a higher efficient satellite launch alternative, using a Supersonic Combustion Ramjet (SCRAMJET engine and waverider aerodynamics. For this development, the waverider technology is under investigation in Prof. Henry T. Nagamatsu Aerothermodynamics and Hypersonics Laboratory (LHTN, in IEAv/DCTA. The investigation has been conducted through ground test campaigns in Hypersonic Shock Tunnel T3. The 14-X Waverider Vehicle characteristic was verified in shock tunnel T3 where surface static pressures and pitot pressure for Mach number 10 were measured and, using Schlieren photographs Diagnostic Method, it was possible to identify a leading-edge attached shock wave in 14-X lower surface.

  13. MHz-rate nitric oxide planar laser-induced fluorescence imaging in a Mach 10 hypersonic wind tunnel.

    Science.gov (United States)

    Jiang, Naibo; Webster, Matthew; Lempert, Walter R; Miller, Joseph D; Meyer, Terrence R; Ivey, Christopher B; Danehy, Paul M

    2011-02-01

    Nitric oxide planar laser-induced fluorescence (NO PLIF) imaging at repetition rates as high as 1 MHz is demonstrated in the NASA Langley 31 in. Mach 10 hypersonic wind tunnel. Approximately 200 time-correlated image sequences of between 10 and 20 individual frames were obtained over eight days of wind tunnel testing spanning two entries in March and September of 2009. The image sequences presented were obtained from the boundary layer of a 20° flat plate model, in which transition was induced using a variety of different shaped protuberances, including a cylinder and a triangle. The high-speed image sequences captured a variety of laminar and transitional flow phenomena, ranging from mostly laminar flow, typically at a lower Reynolds number and/or in the near wall region of the model, to highly transitional flow in which the temporal evolution and progression of characteristic streak instabilities and/or corkscrew-shaped vortices could be clearly identified.

  14. The january effect across volatility regimes

    OpenAIRE

    Agnani, Betty; Aray, Henry

    2007-01-01

    Using a Markov regime switching model, this article presents evidence on the well-known January effect on stock returns. The specification allows a distinction to be drawn between two regimes, one with high volatility and other with low volatility. We obtain a time-varying January effect that is, in general, positive and significant in both volatility regimes. However, this effect is larger in the high volatility regime. In sharp contrast with most previous literature we find two major result...

  15. Implementation Regimes and Street-Level Bureaucrats

    DEFF Research Database (Denmark)

    Winter, Søren; T. Dinesen, Peter; J. May, Peter

    -government regimes foster greater policy commitment, attention to rules, and adherence among frontline workers than is the case for a local-government implementation regime. These lead to actions of street-level bureaucrats in central-government regimes that are more in line with national policies than those...

  16. Accommodating human values in the climate regime

    NARCIS (Netherlands)

    Cook, Rosalind; Tauschinsky, Eljalill

    2008-01-01

    The climate regime addresses one of the most important challenges facing humankind today. However, while the environmental and economic sides of the problem are well represented, it lacks the inclusion of social and human aspects. The human rights regime, in contrast, is a regime which has been esta

  17. Quantum Error Correction in the Zeno Regime

    CERN Document Server

    Erez, N; Reznik, B; Vaidman, L; Erez, Noam; Aharonov, Yakir; Reznik, Benni; Vaidman, Lev

    2003-01-01

    In order to reduce errors, error correction codes (ECCs) need to be implemented fast. They can correct the errors corresponding to the first few orders in the Taylor expansion of the Hamiltonian of the interaction with the environment. If implemented fast enough, the zeroth order error predominates and the dominant effect is of error prevention by measurement (Zeno Effect) rather than correction. In this ``Zeno Regime'', codes with less redundancy are sufficient for protection. We describe such a simple scheme, which uses two ``noiseless'' qubits to protect a large number, $n$, of information qubits from noise from the environment. The ``noisless qubits'' can be realized by treating them as logical qubits to be encoded by one of the previously introduced encoding schemes.

  18. PREDICTION OF FLOW REGIMES IN SPOUT-FLUIDIZED BEDS

    Institute of Scientific and Technical Information of China (English)

    Jiyu Zhang; Fengxiang Tang

    2006-01-01

    Five main flow regimes in spout-fluidized bed were identified in this study, namely, fixed bed, spout with aeration, spout-fluidization, jet in fluidized bed and slugging, together with their corresponding major frequencies translated from pressure signals. The empirical equation A=aBb, in which A=Fr* /(H/Di) and B=(Fr*/(H/D))/(μg/μmf) are respectively the spout-geometry and spout-geometry-fluidization dimensionless numbers, was proposed to distinguish these flow regimes.

  19. Selection Criteria in Regime Switching Conditional Volatility Models

    Directory of Open Access Journals (Sweden)

    Thomas Chuffart

    2015-05-01

    Full Text Available A large number of nonlinear conditional heteroskedastic models have been proposed in the literature. Model selection is crucial to any statistical data analysis. In this article, we investigate whether the most commonly used selection criteria lead to choice of the right specification in a regime switching framework. We focus on two types of models: the Logistic Smooth Transition GARCH and the Markov-Switching GARCH models. Simulation experiments reveal that information criteria and loss functions can lead to misspecification ; BIC sometimes indicates the wrong regime switching framework. Depending on the Data Generating Process used in the experiments, great care is needed when choosing a criterion.

  20. Space as a low-temperature regime of graphs

    CERN Document Server

    Conrady, Florian

    2010-01-01

    I define a statistical model of graphs in which 2-dimensional spaces arise at low temperature. The configurations are given by graphs with a fixed number of edges and the Hamiltonian is a simple, local function of the graphs. Simulations show that there is a transition between a low-temperature regime in which the graphs form triangulations of 2-dimensional surfaces and a high-temperature regime, where the surfaces disappear. I use data for the specific heat and other observables to discuss whether this is a phase transition. The surface states are analyzed with regard to topology and defects.

  1. Adaptation in Collaborative Governance Regimes

    Science.gov (United States)

    Emerson, Kirk; Gerlak, Andrea K.

    2014-10-01

    Adaptation and the adaptive capacity of human and environmental systems have been of central concern to natural and social science scholars, many of whom characterize and promote the need for collaborative cross-boundary systems that are seen as flexible and adaptive by definition. Researchers who study collaborative governance systems in the public administration, planning and policy literature have paid less attention to adaptive capacity specifically and institutional adaptation in general. This paper bridges the two literatures and finds four common dimensions of capacity, including structural arrangements, leadership, knowledge and learning, and resources. In this paper, we focus on institutional adaptation in the context of collaborative governance regimes and try to clarify and distinguish collaborative capacity from adaptive capacity and their contributions to adaptive action. We posit further that collaborative capacities generate associated adaptive capacities thereby enabling institutional adaptation within collaborative governance regimes. We develop these distinctions and linkages between collaborative and adaptive capacities with the help of an illustrative case study in watershed management within the National Estuary Program.

  2. Measuring the effectiveness of international environmental regimes

    Energy Technology Data Exchange (ETDEWEB)

    Helm, C.; Sprinz, D.F.

    1999-05-01

    While past research has emphasized the importance of international regimes for international governance, systematic assessments of regime effects are missing. This article derives a standardized measurement concept for the effectiveness of international environmental regimes by developing an operational rational choice calculus to evaluate actual policy simultaneously against a non-regime counterfactual and a collective optimum. Subsequently, the empirical feasibility of the measurement instrument is demonstrated by way of two international treaties regulating transboundary air pollution in Europe. The results demonstrate that the regimes indeed show positive effects - but fall substantially short of the collective optima. (orig.)

  3. Positioning approach based on Mach-Zehnder fiber sensors and a DSP processor

    Science.gov (United States)

    Wan, Xiong; Du, Tingting; Zhang, Zhimin; Zhang, Huaming; Wang, Peng

    2013-12-01

    A positioning system based on Mach-Zehnder optical fiber interferometer is proposed, which can sense vibration information along the circumference of the fiber sensor and hence be applied to positioning invasions as a safe-guard system in residence communities. A cross-correlation algorithm fulfilled with a DSP processor has been adopted to calculate the time difference of two channels of the Mach-Zehnder optical fiber interferometer. A signal identification algorithm is proposed to decrease the workload of the DSP when no vibration occurs. An experiment with 11.28 kilometers sensing fiber has been carried out, whose results show the Mach-Zehnder positioning system identifies the position of vibration instantaneously and has a 44 meters positioning error within the total sensing distance.

  4. Concept development of a Mach 3.0 high-speed civil transport

    Science.gov (United States)

    Robins, A. Warner; Dollyhigh, Samuel M.; Beissner, Fred L., Jr.; Geiselhart, Karl; Martin, Glenn L.; Shields, E. W.; Swanson, E. E.; Coen, Peter G.; Morris, Shelby J., Jr.

    1988-01-01

    A baseline concept for a Mach 3.0 high-speed civil transport concept was developed as part of a national program with the goal that concepts and technologies be developed which will enable an effective long-range high-speed civil transport system. The Mach 3.0 concept reported represents an aggressive application of advanced technology to achieve the design goals. The level of technology is generally considered to be that which could have a demonstrated availability date of 1995 to 2000. The results indicate that aircraft are technically feasible that could carry 250 passengers at Mach 3.0 cruise for a 6500 nautical mile range at a size, weight and performance level that allows it to fit into the existing world airport structure. The details of the configuration development, aerodynamic design, propulsion system design and integration, mass properties, mission performance, and sizing are presented.

  5. Coherence of Mach fronts during heterogeneous supershear earthquake rupture propagation: Simulations and comparison with observations

    Science.gov (United States)

    Bizzarri, A.; Dunham, Eric M.; Spudich, P.

    2010-01-01

    We study how heterogeneous rupture propagation affects the coherence of shear and Rayleigh Mach wavefronts radiated by supershear earthquakes. We address this question using numerical simulations of ruptures on a planar, vertical strike-slip fault embedded in a three-dimensional, homogeneous, linear elastic half-space. Ruptures propagate spontaneously in accordance with a linear slip-weakening friction law through both homogeneous and heterogeneous initial shear stress fields. In the 3-D homogeneous case, rupture fronts are curved owing to interactions with the free surface and the finite fault width; however, this curvature does not greatly diminish the coherence of Mach fronts relative to cases in which the rupture front is constrained to be straight, as studied by Dunham and Bhat (2008a). Introducing heterogeneity in the initial shear stress distribution causes ruptures to propagate at speeds that locally fluctuate above and below the shear wave speed. Calculations of the Fourier amplitude spectra (FAS) of ground velocity time histories corroborate the kinematic results of Bizzarri and Spudich (2008a): (1) The ground motion of a supershear rupture is richer in high frequency with respect to a subshear one. (2) When a Mach pulse is present, its high frequency content overwhelms that arising from stress heterogeneity. Present numerical experiments indicate that a Mach pulse causes approximately an ω−1.7 high frequency falloff in the FAS of ground displacement. Moreover, within the context of the employed representation of heterogeneities and over the range of parameter space that is accessible with current computational resources, our simulations suggest that while heterogeneities reduce peak ground velocity and diminish the coherence of the Mach fronts, ground motion at stations experiencing Mach pulses should be richer in high frequencies compared to stations without Mach pulses. In contrast to the foregoing theoretical results, we find no average elevation

  6. Magic Numbers

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    THE last digit of my home phone number in Beijing is 4. “So what?” European readers might ask.This was my attitude when I first lived in China; I couldn't understand why Chinese friends were so shocked at my indifference to the number 4. But China brings new discoveries every day, and I have since seen the light. I know now that Chinese people have their own ways of preserving their well being, and that they see avoiding the number 4 as a good way to stay safe.

  7. Number theory

    CERN Document Server

    Andrews, George E

    1994-01-01

    Although mathematics majors are usually conversant with number theory by the time they have completed a course in abstract algebra, other undergraduates, especially those in education and the liberal arts, often need a more basic introduction to the topic.In this book the author solves the problem of maintaining the interest of students at both levels by offering a combinatorial approach to elementary number theory. In studying number theory from such a perspective, mathematics majors are spared repetition and provided with new insights, while other students benefit from the consequent simpl

  8. Mach-wave coherence in 3D media with random heterogeneities

    Science.gov (United States)

    Vyas, Jagdish C.; Mai, P. Martin; Galis, Martin; Dunham, Eric M.; Imperatori, Walter

    2016-04-01

    We investigate Mach-waves coherence for complex super-shear ruptures embedded in 3D random media that lead to seismic scattering. We simulate Mach-wave using kinematic earthquake sources that include fault-regions over which the rupture propagates at super-shear speed. The local slip rate is modeled with the regularized Yoffe function. The medium heterogeneities are characterized by Von Karman correlation function. We consider various realizations of 3D random media from combinations of different values of correlation length (0.5 km, 2 km, 5 km), standard deviation (5%, 10%, 15%) and Hurst exponent (0.2). Simulations in a homogeneous medium serve as a reference case. The ground-motion simulations (maximum resolved frequency of 5 Hz) are conducted by solving the elasto-dynamic equations of motions using a generalized finite-difference method, assuming a vertical strike-slip fault. The seismic wavefield is sampled at numerous locations within the Mach-cone region to study the properties and evolution of the Mach-waves in scattering media. We find that the medium scattering from random heterogeneities significantly diminishes the coherence of Mach-wave in terms of both amplitude and frequencies. We observe that Mach-waves are considerably scattered at distances RJB > 20 km (and beyond) for random media with standard deviation 10%. The scattering efficiency of the medium for small Hurst exponents (H seismic scattering. We suggest that if an earthquake is recorded within 10-15 km fault perpendicular distance and has high PGA, then inversion should be carried out by allowing rupture speed variations from sub-Rayleigh to super-shear.

  9. Nice numbers

    CERN Document Server

    Barnes, John

    2016-01-01

    In this intriguing book, John Barnes takes us on a journey through aspects of numbers much as he took us on a geometrical journey in Gems of Geometry. Similarly originating from a series of lectures for adult students at Reading and Oxford University, this book touches a variety of amusing and fascinating topics regarding numbers and their uses both ancient and modern. The author intrigues and challenges his audience with both fundamental number topics such as prime numbers and cryptography, and themes of daily needs and pleasures such as counting one's assets, keeping track of time, and enjoying music. Puzzles and exercises at the end of each lecture offer additional inspiration, and numerous illustrations accompany the reader. Furthermore, a number of appendices provides in-depth insights into diverse topics such as Pascal’s triangle, the Rubik cube, Mersenne’s curious keyboards, and many others. A theme running through is the thought of what is our favourite number. Written in an engaging and witty sty...

  10. Mach-Zehnder Modulator Performance on the NIF South Pole Bang Time Diagnostic

    Energy Technology Data Exchange (ETDEWEB)

    Beeman, B.; MacPhee, A. G.; Kimbrough, J. R.; Chow, R.; Carpenter, A.; Bond, E.; Zayas-Rivera, Z.; Bell, P.; Celeste, J.; Clancy, T.; Miller, E. K.; Edgell, D.; Donaldson, W. R.

    2013-09-01

    We present performance data for Mach-Zehnder optical modulators fielded on the National Ignition Facility (NIF) as a potential signal path upgrade for the South Pole Bang Time diagnostic. A single channel demonstration system has been deployed utilizing two modulators operating in a 90-degree In phase and Quadrature (I/Q) configuration. X-ray target emission signals are split and fed into two recording systems: a reference CRT based oscilloscope, Greenfield FTD10000, and the dual Mach-Zehnder system. Results of X-ray implosion time (bang time) determination from these two recording systems are compared and presented.

  11. Hydrodynamic Flow and Jet Induced Mach Shocks at RHIC and LHC

    CERN Document Server

    Stöcker, H; Rau, P; Betz, Barbara; Rau, Philip; St\\"ocker, Horst

    2007-01-01

    We discuss the present collective flow signals for the phase transition to quark-gluon plasma (QGP) and the collective flow as a barometer for the equation of state (EoS). A study of Mach shocks induced by fast partonic jets propagating through the QGP is given. We predict a significant deformation of Mach shocks in central Au+Au collisions at RHIC and LHC energies as compared to the case of jet propagation in a static medium. Results of a hydrodynamical study of jet energy loss are presented.

  12. Analysis of compressible light dynamic stall flow at transitional Reynolds numbers

    DEFF Research Database (Denmark)

    Dyken, R.D. Van; Ekaterinaris, John A.; Chandrasekhara, M.S.;

    1996-01-01

    Numerical and experimental results of steady and light dynamic stall flow over an oscillating NACA 0012 airfoil at a freestream Mach number of 0.3 and Reynolds number of 0.54 x 10(6) are compared, The experimental observation that dynamic stall is induced from the bursting of a laminar separation...

  13. Differentially Rotating White Dwarfs I: Regimes of Internal Rotation

    Science.gov (United States)

    Ghosh, Pranab; Wheeler, J. Craig

    2017-01-01

    Most viable models of Type Ia supernovae (SNe Ia) require the thermonuclear explosion of a carbon/oxygen white dwarf that has evolved in a binary system. Rotation could be an important aspect of any model for SNe Ia, whether single or double degenerate, with the white dwarf mass at, below, or above the Chandrasekhar limit. Differential rotation is specifically invoked in attempts to account for the apparent excess mass in the super-Chandrasekhar events. Some earlier work has suggested that only uniform rotation is consistent with the expected mechanisms of angular momentum transport in white dwarfs, while others have found pronounced differential rotation. We show that if the baroclinic instability is active in degenerate matter and the effects of magnetic fields are neglected, both nearly uniform rotation and strongly differential rotation are possible. We classify rotation regimes in terms of the Richardson number, Ri. At small values of Ri ≤slant 0.1, we find both the low-viscosity Zahn regime with a nonmonotonic angular velocity profile and a new differential rotation regime for which the viscosity is high and scales linearly with the shear, σ. Employment of Kelvin–Helmholtz viscosity alone yields differential rotation. Large values of Ri ≫ 1 produce a regime of nearly uniform rotation for which the baroclinic viscosity is of intermediate value and scales as {σ }3. We discuss the gap in understanding of the behavior at intermediate values of Ri and how observations may constrain the rotation regimes attained by nature.

  14. Regime switching model for financial data: Empirical risk analysis

    Science.gov (United States)

    Salhi, Khaled; Deaconu, Madalina; Lejay, Antoine; Champagnat, Nicolas; Navet, Nicolas

    2016-11-01

    This paper constructs a regime switching model for the univariate Value-at-Risk estimation. Extreme value theory (EVT) and hidden Markov models (HMM) are combined to estimate a hybrid model that takes volatility clustering into account. In the first stage, HMM is used to classify data in crisis and steady periods, while in the second stage, EVT is applied to the previously classified data to rub out the delay between regime switching and their detection. This new model is applied to prices of numerous stocks exchanged on NYSE Euronext Paris over the period 2001-2011. We focus on daily returns for which calibration has to be done on a small dataset. The relative performance of the regime switching model is benchmarked against other well-known modeling techniques, such as stable, power laws and GARCH models. The empirical results show that the regime switching model increases predictive performance of financial forecasting according to the number of violations and tail-loss tests. This suggests that the regime switching model is a robust forecasting variant of power laws model while remaining practical to implement the VaR measurement.

  15. Burning plasma regime for Fussion-Fission Research Facility

    Science.gov (United States)

    Zakharov, Leonid E.

    2010-11-01

    The basic aspects of burning plasma regimes of Fusion-Fission Research Facility (FFRF, R/a=4/1 m/m, Ipl=5 MA, Btor=4-6 T, P^DT=50-100 MW, P^fission=80-4000 MW, 1 m thick blanket), which is suggested as the next step device for Chinese fusion program, are presented. The mission of FFRF is to advance magnetic fusion to the level of a stationary neutron source and to create a technical, scientific, and technology basis for the utilization of high-energy fusion neutrons for the needs of nuclear energy and technology. FFRF will rely as much as possible on ITER design. Thus, the magnetic system, especially TFC, will take advantage of ITER experience. TFC will use the same superconductor as ITER. The plasma regimes will represent an extension of the stationary plasma regimes on HT-7 and EAST tokamaks at ASIPP. Both inductive discharges and stationary non-inductive Lower Hybrid Current Drive (LHCD) will be possible. FFRF strongly relies on new, Lithium Wall Fusion (LiWF) plasma regimes, the development of which will be done on NSTX, HT-7, EAST in parallel with the design work. This regime will eliminate a number of uncertainties, still remaining unresolved in the ITER project. Well controlled, hours long inductive current drive operation at P^DT=50-100 MW is predicted.

  16. Hall effect in hopping regime

    Energy Technology Data Exchange (ETDEWEB)

    Avdonin, A., E-mail: avdonin@ifpan.edu.pl [Institute of Physics, Polish Academy of Sciences, Al. Lotników 32/46, 02-668 Warszawa (Poland); Skupiński, P. [Institute of Physics, Polish Academy of Sciences, Al. Lotników 32/46, 02-668 Warszawa (Poland); Grasza, K. [Institute of Physics, Polish Academy of Sciences, Al. Lotników 32/46, 02-668 Warszawa (Poland); Institute of Electronic Materials Technology, ul. Wólczyńska 133, 01-919 Warszawa (Poland)

    2016-02-15

    A simple description of the Hall effect in the hopping regime of conductivity in semiconductors is presented. Expressions for the Hall coefficient and Hall mobility are derived by considering averaged equilibrium electron transport in a single triangle of localization sites in a magnetic field. Dependence of the Hall coefficient is analyzed in a wide range of temperature and magnetic field values. Our theoretical result is applied to our experimental data on temperature dependence of Hall effect and Hall mobility in ZnO. - Highlights: • Expressions for Hall coefficient and mobility for hopping conductivity are derived. • Theoretical result is compared with experimental curves measured on ZnO. • Simultaneous action of free and hopping conduction channels is considered. • Non-linearity of hopping Hall coefficient is predicted.

  17. Calculations of the Supersonic Wave Drag of Nonlifting Wings with Arbitrary Sweepback and Aspect Ratio Wings Swept Behind the Mach Lines

    Science.gov (United States)

    1947-02-21

    appendix D. Bra» coefficient of swot -tack wlnfl at Mach number of 1.0. - Tho solution of the equations for c. fiven in appendix 3 shown tliat, for...gm’’ A’U " "^ ’ I*’ ’ «’I a»-2 - (a»𔃽 - 3m 𔃼A’ • A»3) Cosh-l 5^ " A’k + ".𔄃 jam’fm’ - A’)I A𔃽 , -1 an’ - A’ A’ . s\\ + cosh

  18. Transcendental numbers

    CERN Document Server

    Murty, M Ram

    2014-01-01

    This book provides an introduction to the topic of transcendental numbers for upper-level undergraduate and graduate students. The text is constructed to support a full course on the subject, including descriptions of both relevant theorems and their applications. While the first part of the book focuses on introducing key concepts, the second part presents more complex material, including applications of Baker’s theorem, Schanuel’s conjecture, and Schneider’s theorem. These later chapters may be of interest to researchers interested in examining the relationship between transcendence and L-functions. Readers of this text should possess basic knowledge of complex analysis and elementary algebraic number theory.

  19. Cavity Optomechanics in the Quantum Regime

    Science.gov (United States)

    Botter, Thierry Claude Marc

    An exciting scientific goal, common to many fields of research, is the development of ever-larger physical systems operating in the quantum regime. Relevant to this dissertation is the objective of preparing and observing a mechanical object in its motional quantum ground state. In order to sense the object's zero-point motion, the probe itself must have quantum-limited sensitivity. Cavity optomechanics, the interactions between light and a mechanical object inside an optical cavity, provides an elegant means to achieve the quantum regime. In this dissertation, I provide context to the successful cavity-based optical detection of the quantum-ground-state motion of atoms-based mechanical elements; mechanical elements, consisting of the collective center-of-mass (CM) motion of ultracold atomic ensembles and prepared inside a high-finesse Fabry-Perot cavity, were dispersively probed with an average intracavity photon number as small as 0.1. I first show that cavity optomechanics emerges from the theory of cavity quantum electrodynamics when one takes into account the CM motion of one or many atoms within the cavity, and provide a simple theoretical framework to model optomechanical interactions. I then outline details regarding the apparatus and the experimental methods employed, highlighting certain fundamental aspects of optical detection along the way. Finally, I describe background information, both theoretical and experimental, to two published results on quantum cavity optomechanics that form the backbone of this dissertation. The first publication shows the observation of zero-point collective motion of several thousand atoms and quantum-limited measurement backaction on that observed motion. The second publication demonstrates that an array of near-ground-state collective atomic oscillators can be simultaneously prepared and probed, and that the motional state of one oscillator can be selectively addressed while preserving the near-zero-point motion of

  20. Energy, Metaphysics, and Space: Ernst Mach's Interpretation of Energy Conservation as the Principle of Causality

    Science.gov (United States)

    Guzzardi, Luca

    2014-01-01

    This paper discusses Ernst Mach's interpretation of the principle of energy conservation (EC) in the context of the development of energy concepts and ideas about causality in nineteenth-century physics and theory of science. In doing this, it focuses on the close relationship between causality, energy conservation and space in Mach's…

  1. Numbers, Please!

    Science.gov (United States)

    Thelin, John R.

    2013-01-01

    What topic would you choose if you had the luxury of writing forever? In this article, John Thelin provides his response: He would opt to write about the history of higher education in a way that relies on quantitative data. "Numbers, please!" is his research request in taking on a longitudinal study of colleges and universities over…

  2. Numbers, Please!

    Science.gov (United States)

    Thelin, John R.

    2013-01-01

    What topic would you choose if you had the luxury of writing forever? In this article, John Thelin provides his response: He would opt to write about the history of higher education in a way that relies on quantitative data. "Numbers, please!" is his research request in taking on a longitudinal study of colleges and universities over…

  3. Negative Numbers

    Science.gov (United States)

    Galbraith, Mary J.

    1974-01-01

    Examination of models for representing integers demonstrates that formal operational thought is required for establishing the operations on integers. Advocated is the use of many models for introducing negative numbers but, apart from addition, it is recommended that operations on integers be delayed until the formal operations stage. (JP)

  4. Shape and motion of drops in the inertial regime

    CERN Document Server

    Vijaya, Senthil Kumar K

    2010-01-01

    In this paper, we report experimental results on the shape and motion of a mercury droplet, placed in a horizontally rotating cylinder in the rpm range 8-93, so that the Reynolds number of the drop 2500number 0.0002regimes identified with varying speeds of rotation (i) oval or rounded regime (ii) corner regime and (iii) cusping regime. The oval to corner transition happens at a finite receding contact angle of 950. The ratio of critical contact angle ({\\theta}c) at which the transition occurs to the static receding contact ang...

  5. Regimes of flow induced vibration for tandem, tethered cylinders

    Science.gov (United States)

    Nave, Gary; Stremler, Mark

    2015-11-01

    In the wake of a bluff body, there are a number of dynamic response regimes that exist for a trailing bluff body depending on spacing, structural restoring forces, and the mass-damping parameter m* ζ . For tandem cylinders with low values of m* ζ , two such regimes of motion are Gap Flow Switching and Wake Induced Vibration. In this study, we consider the dynamics of a single degree-of-freedom rigid cylinder in the wake of another in these regimes for a variety of center-to-center cylinder spacings (3-5 diameters) and Reynolds numbers (4,000-11,000). The system consists of a trailing cylinder constrained to a circular arc around a fixed leading cylinder, which, for small angle displacements, bears a close resemblance to the transversely oscillating cylinders found more commonly in existing literature. From experiments on this system, we compare and contrast the dynamic response within these two regimes. Our results show sustained oscillations in the absence of a structural restoring force in all cases, providing experimental support for the wake stiffness assumption, which is based on the mean lift toward the center line of flow.

  6. Flow regimes in a trapped vortex cell

    Science.gov (United States)

    Lasagna, D.; Iuso, G.

    2016-03-01

    This paper presents results of an experimental investigation on the flow in a trapped vortex cell, embedded into a flat plate, and interacting with a zero-pressure-gradient boundary layer. The objective of the work is to describe the flow features and elucidate some of the governing physical mechanisms, in the light of recent investigations on flow separation control using vortex cells. Hot-wire velocity measurements of the shear layer bounding the cell and of the boundary layers upstream and downstream are reported, together with spectral and correlation analyses of wall-pressure fluctuation measurements. Smoke flow visualisations provide qualitative insight into some relevant features of the internal flow, namely a large-scale flow unsteadiness and possible mechanisms driving the rotation of the vortex core. Results are presented for two very different regimes: a low-Reynolds-number case where the incoming boundary layer is laminar and its momentum thickness is small compared to the cell opening, and a moderately high-Reynolds-number case, where the incoming boundary layer is turbulent and the ratio between the momentum thickness and the opening length is significantly larger than in the first case. Implications of the present findings to flow control applications of trapped vortex cells are also discussed.

  7. Experimental investigation of liquid jet injection into Mach 6 hypersonic crossflow

    NARCIS (Netherlands)

    Beloki Perurena, J.; Asma, C.O.; Theunissen, R.; Chazot, O.

    2008-01-01

    The injection of a liquid jet into a crossing Mach 6 air flow is investigated. Experiments were conducted on a sharp leading edge flat plate with flush mounted injectors. Water jets were introduced through different nozzle shapes at relevant jet-to-air momentum-flux ratios. Sufficient temporal

  8. Event-based simulation of single-photon beam splitters and Mach-Zehnder interferometers

    NARCIS (Netherlands)

    De Raedt, H; De Raedt, K; Michielsen, K

    2005-01-01

    We demonstrate that networks of locally connected processing units with a primitive learning capability exhibit a behavior that is usually only attributed to quantum systems. We describe networks that simulate single-photon beam splitter and Mach-Zehnder interferometer experiments on a causal, event

  9. Analysing surface plasmon resonance phase sensor based on Mach-Zehnder interferometer technique using glycerin

    Science.gov (United States)

    Kashif, Muhammad; Bakar, A. Ashrif A.; Hashim, Fazida Hanim

    2016-12-01

    Surface Plasmon Resonance (SPR) based on Mach-Zehnder interferometer (MZI) is a very accurate tool for the detection and analysis of molecular interactions. The performance of the proposed SPR phase sensor is dependent upon multiple performance parameters that include sensitivity, repeatability, drift and the induction speed of fluid into the flow cell. The SPR Mach-Zehnder interferometer is tested for different glycerin-water concentrations to check its performance based on the different parameters. This paper highlights the enhancement of the performance of SPR phase technique based on MZI that is influenced by different parameters, measured using glycerin solutions. These four performance parameters can affect the performance of SPR based on MZI and have a particular impact on the sensor output. It also provides us information about suitable working conditions for the SPR Mach-Zehnder interferometer sensor. The experiment data shows that the sensor's sensitivity is high for small concentrations of glycerin-water mixtures. Also, any change in drift as well as in induction speed of fluid can affect the performance of SPR Mach-Zehnder interferometer. The sensitivity of SPR phase sensor is high as it can measure glycerin concentration as low as 0.05%.

  10. Experimental investigation of liquid jet injection into Mach 6 hypersonic crossflow

    NARCIS (Netherlands)

    Beloki Perurena, J.; Asma, C.O.; Theunissen, R.; Chazot, O.

    2008-01-01

    The injection of a liquid jet into a crossing Mach 6 air flow is investigated. Experiments were conducted on a sharp leading edge flat plate with flush mounted injectors. Water jets were introduced through different nozzle shapes at relevant jet-to-air momentum-flux ratios. Sufficient temporal resol

  11. All optical wavelength conversion by SOA's in a Mach-Zehnder configuration

    DEFF Research Database (Denmark)

    Durhuus, T.; Jørgensen, C.; Mikkelsen, Benny

    1994-01-01

    Penalty free wavelength conversion is demonstrated at 2.5 Gbit/s over a wavelength span of 12 nm by the use of semiconductor optical amplifier (SOA)'s in a Mach-Zehnder configuration. An increase in the extinction ratio is measured for the converted signal compared to the input signal implying si...... signal regeneration as well as wavelength conversion...

  12. A versatile all-optical modulator based on nonlinear Mach-Zehnder interferometers

    NARCIS (Netherlands)

    Krijnen, G.J.M.; Villeneuve, A.; Stegeman, G.I.; Lambeck, P.V.; Hoekstra, H.J.W.M.

    1994-01-01

    A device based on a Nonlinear Mach-Zehnder interferometer (NMI) which exploits cross-phase modulation of two co-propagating modes in bimodal branches has been described in this paper. The advantage of this device is that it becomes polarisation independent while keeping phase insensitive by using di

  13. Cultural Mirrors Made of Papier Mache: Challenging Misrepresentations of Indigenous Knowledges in Education through Media

    Science.gov (United States)

    Iseke, Judy

    2009-01-01

    Misrepresentation, appropriation, and denigrating Indigenous knowledge is still common practice in educational institutions despite efforts of critical educators to challenge these practices. One such challenge was to papier mache totem poles in an education institution's library in a faculty of education that houses teacher education programs. A…

  14. Incorporation of Mach's Principle in ΛFRW Cosmology that depends dynamically of the distance range

    Science.gov (United States)

    Falcon, N.

    2017-07-01

    It postulates a FRW cosmological model without dark matter and cosmological term depending the distance scale, in addition to incorporate Mach's principle, is consistent with the observations: rotation curves of the galaxies, the nucleosynthesis primordial and CMB. The dynamic expression of Cosmological term is an alternative to non-baryonic dark matter and a reinterpretation of dark energy.

  15. The realization of an integrated Mach-Zehnder waveguide immunosensor in silicon technology

    NARCIS (Netherlands)

    Schipper, E.F.; Brugman, A.M.; Lechuga, L.M.; Kooyman, R.P.H.; Greve, J.; Dominguez, C.

    1997-01-01

    We describe the realization of a symmetric integrated channel waveguide Mach-Zehnder sensor which uses the evanescent field to detect small refractive-index changes (¿nmin ¿ 1 × 10¿4) near the guiding-layer surface. This guiding layer consists of ridge structures with a height of 3 nm and a width of

  16. On the Use of a Virtual Mach-Zehnder Interferometer in the Teaching of Quantum Mechanics

    Science.gov (United States)

    Pereira, Alexsandro; Ostermann, Fernanda; Cavalcanti, Claudio

    2009-01-01

    For many students, the conceptual learning of quantum mechanics can be rather painful owing to the counter-intuitive nature of quantum phenomena. In order to enhance students' understanding of the odd behaviour of photons and electrons, we introduce a computational simulation of the Mach-Zehnder interferometer, developed by our research group. An…

  17. On the Use of a Virtual Mach-Zehnder Interferometer in the Teaching of Quantum Mechanics

    Science.gov (United States)

    Pereira, Alexsandro; Ostermann, Fernanda; Cavalcanti, Claudio

    2009-01-01

    For many students, the conceptual learning of quantum mechanics can be rather painful owing to the counter-intuitive nature of quantum phenomena. In order to enhance students' understanding of the odd behaviour of photons and electrons, we introduce a computational simulation of the Mach-Zehnder interferometer, developed by our research group. An…

  18. The Contribution of Ernst Mach to Embodied Cognition and Mathematics Education

    Science.gov (United States)

    Zudini, Verena; Zuccheri, Luciana

    2016-01-01

    A study of the interactions between mathematics and cognitive science, carried out within a historical perspective, is important for a better understanding of mathematics education in the present. This is evident when analysing the contribution made by the epistemological theories of Ernst Mach. On the basis of such theories, a didactic method was…

  19. Equilibrium yield curves under regime switching

    OpenAIRE

    García-Verdú, Santiago

    2010-01-01

    This paper studies how inflation as a macroeconomic indicator affects nominal bond prices. I consider an economy with a representative agent with Epstein- Zin preferences. Regime switching affects the state-space capturing inflation and consumption growth. Thus, the agent is concerned about the intertemporal distribution of risk, which is affected by the persistence of the variables and the regimes. Regime switching allows for structural changes in the volatility of unexpected shocks. To the ...

  20. Thermal regime of Negotinska Krajina

    Directory of Open Access Journals (Sweden)

    Živković Ljiljana

    2005-01-01

    Full Text Available Negotin Krajina geographically belongs to Mezian tablet that means it is widely open to the influences from the East but main air influences come from the West and North-West causes specific thermal characteristics. Meteorological station "Negotin" is the only one respectable station in the Krajina then we analyze results from various periods since 1901. It is important to emphasize that station "Negotin" doesn't have work continuity since the beginning of the century, thus for analyzing certain climate elements we have had to use method of analogy with station "Zaječar". A part of that, observations were not done by the same methodology so there is lack of some important indicators for this first period. To determine air thermo-regime of Negotin Krajina during 20 century, standard periods (1901-1930., 1931-1960. and 1961-1990 for analyzing climate elements suggested by WMO, were compared. Also, periods from 1925. to 1940. and from 1990. to 2000. were added to this analysis (according to data we had.

  1. Plasma Sensor for High Bandwidth Mass-Flow Measurements at High Mach Numbers with RF Link Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposal is aimed at the development of a miniature high bandwidth (1 MHz class) plasma sensor for flow measurements at high enthalpies. This device uses a...

  2. Vortex sound in the presence of a low Mach number flow across a drum-like silencer.

    Science.gov (United States)

    Tang, S K

    2011-05-01

    The sound generated by a vortex propagating across a two-dimensional duct section with flexible walls (membranes) in an infinitely long rigid duct conveying a flow is investigated numerically using the matched asymptotic expansion technique and the potential theory. The effects of the initial vortex position, the mechanical properties of the flexible walls, and the mean flow on the sound generation are examined in detail. Results show that the presence of a vortex inside a uniform mean flow can strengthen or attenuate the sound generation, depending on the phase of the membrane vibration when the vortex starts vigorous interaction with the membranes and the strength of the mean flow. The results tend to imply that there is a higher chance of sound amplification when a vortex stream is moving closer to the lighter membrane under a relatively strong mean flow or when the mean flow is weak. The chances of sound amplification or attenuation are equal otherwise.

  3. Experimental study of nonlinear processes in a swept-wing boundary layer at the mach number M=2

    Science.gov (United States)

    Yermolaev, Yu. G.; Kosinov, A. D.; Semionov, N. V.

    2014-09-01

    Results of experiments aimed at studying the linear and nonlinear stages of the development of natural disturbances in the boundary layer on a swept wing at supersonic velocities are presented. The experiments are performed on a swept wing model with a lens-shaped airfoil, leading-edge sweep angle of 45°, and relative thickness of 3%. The disturbances in the flow are recorded by a constant-temperature hot-wire anemometer. For determining the nonlinear interaction of disturbances, the kurtosis and skewness are estimated for experimentally obtained distributions of the oscillating signal over the streamwise coordinate or along the normal to the surface. The disturbances are found to increase in the frequency range from 8 to 35 kHz in the region of their linear development, whereas enhancement of high-frequency disturbances is observed in the region of their nonlinear evolution. It is demonstrated that the growth of disturbances in the high-frequency spectral range ( f > 35 kHz) is caused by the secondary instability.

  4. Computation of aircraft component flow fields at transonic Mach numbers using a three-dimensional Navier-Stokes algorithm

    Science.gov (United States)

    Shrewsbury, George D.; Vadyak, Joseph; Schuster, David M.; Smith, Marilyn J.

    1989-01-01

    A computer analysis was developed for calculating steady (or unsteady) three-dimensional aircraft component flow fields. This algorithm, called ENS3D, can compute the flow field for the following configurations: diffuser duct/thrust nozzle, isolated wing, isolated fuselage, wing/fuselage with or without integrated inlet and exhaust, nacelle/inlet, nacelle (fuselage) afterbody/exhaust jet, complete transport engine installation, and multicomponent configurations using zonal grid generation technique. Solutions can be obtained for subsonic, transonic, or hypersonic freestream speeds. The algorithm can solve either the Euler equations for inviscid flow, the thin shear layer Navier-Stokes equations for viscous flow, or the full Navier-Stokes equations for viscous flow. The flow field solution is determined on a body-fitted computational grid. A fully-implicit alternating direction implicit method is employed for the solution of the finite difference equations. For viscous computations, either a two layer eddy-viscosity turbulence model or the k-epsilon two equation transport model can be used to achieve mathematical closure.

  5. Number names and number understanding

    DEFF Research Database (Denmark)

    Ejersbo, Lisser Rye; Misfeldt, Morten

    2014-01-01

    This paper concerns the results from the first year of a three-year research project involving the relationship between Danish number names and their corresponding digits in the canonical base 10 system. The project aims to develop a system to help the students’ understanding of the base 10 syste...

  6. Peculiarities of Light Propagation in Photonic Crystal Waveguides in the Slow Light Regime

    DEFF Research Database (Denmark)

    Lavrinenko, Andrei; Borel, Peter Ingo; Frandsen, Lars Hagedorn;

    2006-01-01

    We report on transmission, field mapping, and spectral dependence of the group index in the slow light regime, obtained by numerical modelling. The influence of a finite number of lattice periods on the observed properties is pointed out.......We report on transmission, field mapping, and spectral dependence of the group index in the slow light regime, obtained by numerical modelling. The influence of a finite number of lattice periods on the observed properties is pointed out....

  7. Pecularities of Light Propagation in Photonic Crystal Waveguides in the Slow Light Regime

    DEFF Research Database (Denmark)

    Lavrinenko, Andrei; Borel, Peter Ingo; Frandsen, Lars Hagedorn;

    2006-01-01

    We report on transmission, fied mapping, and spectral dependence of the group index in the slow light regime, obtained by numerical modelling. The influence of a finite number of lattice periods on the observed properties is pointed out.......We report on transmission, fied mapping, and spectral dependence of the group index in the slow light regime, obtained by numerical modelling. The influence of a finite number of lattice periods on the observed properties is pointed out....

  8. Effect of winglets on a first-generation jet transport wing. 3: Pressure and spanwise load distributions for a semispan model at Mach 0.30. [in the Langley 8 ft transonic tunnel

    Science.gov (United States)

    Montoya, L. C.; Jacobs, P. F.; Flechner, S. G.

    1977-01-01

    Pressure and spanwise load distributions on a first-generation jet transport semispan model at a Mach number of 0.30 are given for the basic wing and for configurations with an upper winglet only, upper and lower winglets, and a simple wing-tip extension. To simulate second-segment-climb lift conditions, leading- and/or trailing-edge flaps were added to some configurations.

  9. Crustal stress regime in Italy

    Directory of Open Access Journals (Sweden)

    M. Cesaro

    1997-06-01

    Full Text Available In order to obtain a reliable map of the present-day stress field in Italy, needed to better understand the active tectonic processes and to contribute to the assessment of seismic hazard, in 1992 we started to collect and analyze new data from borehole breakouts in deep oil and geothermal wells and focal mechanisms of earthquakes (2.5 < M <5 occurred in Italy between 1988 and 1995. From about 200 deep wells and 300 focal mechanisms analyzed to date, we infer that: the internal (SW sector of the Northern Apenninic arc is extending with minimum compressional stress (Shmin oriented ? ENE, while the external front is thrusting over the Adriatic foreland (Shmin ? NW-SE. The entire Southern Apennine is extending in NE direction (from the Tyrrhenian margin to the Apulian foreland and compression (in the foredeep is no longer active at the outer (NE thrust front. Between these two arcs, an abrupt change in the tectonic regime is detected with directions of horizontal stress changing by as much as 90º in the external front, around latitude 430N. Along the Ionian side of the Calabrian arc the stress directions inferred from breakouts and focal mechanisms are scattered with a hint of rotation from N-S Shmin close to the Southern Apennines, to ~ E-W directions in the Messina Strait. In Sicily, a NW-SE direction of SHmax is evident in the Hyblean foreland, parallel to the direction of plate motion between Africa and Europe. A more complex pattern of stress directions is observed in the thrust belt zone, with rotations from the regional trend (NW í directed SHmax to NE oriented SHmax. A predominant NW direction of SHmax is also detected in mainland Sicily from earthquake focal mechanisms, but no well data are available in this region. In the northern part of Sicily (Aeolian Islands a ~N-S direction of SHmax is observed.

  10. Framing of regimes and transition strategies

    DEFF Research Database (Denmark)

    Jensen, Jens Stissing

    2012-01-01

    This article suggests that transition strategies are always formulated in the context of specific representations of the regime and the challenges it faces. It is argued that the framing of a regime affects the envisioning of transition strategies. An analysis of the current development agenda...

  11. Multiscale regime shifts and planetary boundaries

    NARCIS (Netherlands)

    Hughes, T.P.; Carpenter, S.; Rockstrom, J.; Scheffer, M.; Walker, B.

    2013-01-01

    Life on Earth has repeatedly displayed abrupt and massive changes in the past, and there is no reason to expect that comparable planetary-scale regime shifts will not continue in the future. Different lines of evidence indicate that regime shifts occur when the climate or biosphere transgresses a ti

  12. LEGAL MATRIMONIAL REGIME IN B&H

    Directory of Open Access Journals (Sweden)

    Boris Krešić

    2011-12-01

    Full Text Available Matrimonial regime between spouses or between extramarital partners, and between parents and children is regulated by the Family Law Act of Bosnia and Herzegovina Federation, hereinafter FLA B&HF (SG FBiH 35/05, 41/05, Family Law Act of the Republic of Srpska, hereinafter FLA RS (SG RS”54/02, 41/08 and the Family Law Act of Brčko District, hereinafter FLA BD (SG RS, 66/07. Legal rules used for the regulation of the matrimonial regime between spouses, as well as between spouses and third parties make matrimonial regime (Ponjavić, 2005, p. 361. Matrimonial regime between spouses in family legislation in Bosnia and Herzegovina (B&H is regulated in two following ways: as legal matrimonial regime and as contract matrimonial regime. Legal regime is the one which applies on spouses if not arranged otherwise prior to contracting marriage or during marriage. In this paper the author indicates the differences between the legal matrimonial regimes of the two entities as well as those between the entities and Brčko District of Bosnia and Herzegovina.

  13. LOW DOSE MAGNESIUM SULPHATE REGIME FOR ECLAMPSIA

    Directory of Open Access Journals (Sweden)

    Bangal V

    2009-09-01

    Full Text Available Pre- eclampsia is one of the commonest medical complications seen during pregnancy. It contributes significantly to maternal and perinatal morbidity and mortality. Dr.J.A.Pritchard in 1955, introduced magnesium sulphate for control of convulsions in eclampsia and is used worldwide. Considering the low body mass index of indian women, a low dose magnesium sulphate regime has been introduced by some authors. Present study was carried out at tertiary care centre in rural area. Fifty cases of eclampsia were randomly selected to find out the efficacy of low dose magnesium sulphate regime to control eclamptic convulsions. Maternal and perinatal outcome and magnesium toxicity were analyzed. It was observed that 86% cases responded to initial intravenous dose of 4 grams of 20% magnesium sulphate . Eight percent cases, who got recurrence of convulsion, were controlled by additional 2 grams of 20% magnesium sulphate. Six percent cases required shifting to standard Pritchard regime, as they did not respond to low dose magnesium sulphate regime. The average total dose of magnesium sulphate required for control of convulsions was 20 grams ie. 54.4% less than that of standard Pritchard regime. The maternal and perinatal morbidity and mortality in the present study werecomparable to those of standard Pritchard regime. The study did not find a single case of magnesium related toxicity with low dose magnesium sulphate regime. Low dose magnesium sulphate regime was found to be safe and effective in eclampsia.

  14. Nonlinear regimes in mean-field full-sphere dynamo

    CERN Document Server

    Pipin, V V

    2016-01-01

    The mean-field dynamo model is employed to study the non-linear dynamo regimes in a fully convective star of mass 0.3$M_{\\odot}$ rotating with period of 10 days. The differential rotation law was estimated using the mean-field hydrodynamic and heat transport equations. For the intermediate parameter of the turbulent magnetic Reynolds number, $Pm_{T}=3$ we found the oscillating dynamo regimes with period about 40Yr. The higher $Pm_{T}$ results to longer dynamo periods. The meridional circulation has one cell per hemisphere. It is counter-clockwise in the Northen hemisphere. The amplitude of the flow at the surface around 1 m/s. Tne models with regards for meridional circulation show the anti-symmetric relative to equator magnetic field. If the large-scale flows is fixed we find that the dynamo transits from axisymmetric to non-axisymmetric regimes for the overcritical parameter of the $\\alpha$effect. The change of dynamo regime occurs because of the non-axisymmetric non-linear $\\alpha$-effect. The situation pe...

  15. The 2014 presidential elections and their impact on the premier-presidential regime in Romania

    Directory of Open Access Journals (Sweden)

    Ionela Gavril

    2015-03-01

    Full Text Available First, we will demonstrate that, from an institutional perspective, Romania can labeled of premier-presidentialism regime, but the 2004 and 2009 elections have had a strong impact on the type of regime, meaning that several extra-constitutional factors led to the malfunction of the regime. Out of a total of 15 prime-minister nominations made after 1989, 8 can be considered deviations from the premier-presidential regime, their number being larger between 2004-2014 rather than in 1990-2000. The empirical analysis of the 2004-2014 period, highlighted three extra-constitutional factors that that made the premier-presidential regime be, in fact, a malfunctioning one: leadership style, crisis situations and the recent legitimacy of the president versus the parliament. By identifying the factors that influenced the regime type, we can determine some theoretical expectations following the 2014 elections. The success of a premier-presidentialism regime in Romania will be determined by the number of deviations from such a regime registered after the 2014 elections.

  16. Ernst Mach, George Sarton and the Empiry of Teaching Science Part I

    Science.gov (United States)

    Siemsen, Hayo

    2012-04-01

    George Sarton had a strong influence on modern history of science. The method he pursued throughout his life was the method he had discovered in Ernst Mach's Mechanics when he was a student in Ghent. Sarton was in fact throughout his life implementing a research program inspired by the epistemology of Mach. Sarton in turn inspired many others (James Conant, Thomas Kuhn, Gerald Holton, etc.). What were the origins of these ideas in Mach and what can this origin tell us about the history of science and science education nowadays? Which ideas proved to be successful and which ones need to be improved upon? The following article will elaborate the epistemological questions, which Darwin's "Origin" raised concerning human knowledge and scientific knowledge and which led Mach to adapt the concept of what is "empirical" in contrast to metaphysical a priori assumptions a second time after Galileo. On this basis Sarton proposed "genesis and development" as the major goal of Isis. Mach had elaborated this epistemology in La Connaissance et l'Erreur ( Knowledge and Error), which Sarton read in 1913 (Hiebert 1905/1976; de Mey 1984). Accordingly for Sarton, history becomes not only a subject of science, but a method of science education. Culture—and science as part of culture—is a result of a genetic process. History of science shapes and is shaped by science and science education in a reciprocal process. Its epistemology needs to be adapted to scientific facts and the philosophy of science. Sarton was well aware of the need to develop the history of science and the philosophy of science along the lines of this reciprocal process. It was a very fruitful basis, but a specific part of it, Sarton did not elaborate further, namely the psychology of science education. This proved to be a crucial missing element for all of science education in Sarton's succession, especially in the US. Looking again at the origins of the central questions in the thinking of Mach, which provided

  17. Primary control of a Mach scale swashplateless rotor using brushless DC motor actuated trailing edge flaps

    Science.gov (United States)

    Saxena, Anand

    The focus of this research was to demonstrate a four blade rotor trim in forward flight using integrated trailing edge flaps instead of using a swashplate controls. A compact brushless DC motor was evaluated as an on-blade actuator, with the possibility of achieving large trailing edge flap amplitudes. A control strategy to actuate the trailing edge flap at desired frequency and amplitude was developed and large trailing edge flap amplitudes from the motor (instead of rotational motion) were obtained. Once the actuator was tested on the bench-top, a lightweight mechanism was designed to incorporate the motor in the blade and actuate the trailing edge flaps. A six feet diameter, four bladed composite rotor with motor-flap system integrated into the NACA 0012 airfoil section was fabricated. Systematic testing was carried out for a range of load conditions, first in the vacuum chamber followed by hover tests. Large trailing edge flap deflections were observed during the hover testing, and a peak to peak trailing edge flap amplitude of 18 degree was achieved at 2000 rotor RPM with hover tip Mach number of 0.628. A closed loop controller was designed to demonstrate trailing edge flap mean position and the peak to peak amplitude control. Further, a soft pitch link was designed and fabricated, to replace the stiff pitch link and thereby reduce the torsional stiffness of the blade to 2/rev. This soft pitch link allowed for blade root pitch motion in response to the trailing edge flap inputs. Blade pitch response due to both steady as well as sinusoidal flap deflections were demonstrated. Finally, tests were performed in Glenn L. Martin wind tunnel using a model rotor rig to assess the performance of motor-flap system in forward flight. A swashplateless trim using brushless DC motor actuated trailing edge flaps was achieved for a rotor operating at 1200 RPM and an advance ratio of 0.28. Also, preliminary exploration was carried out to test the scalability of the motor

  18. Laser-Matter Interaction: Classical Regime versus Quantum Regime

    CERN Document Server

    Pálffy, Adriana; Weidenmüller, Hans A

    2016-01-01

    Doppler backscattering of optical laser photons on a "flying mirror" of relativistic electrons promises to yield coherent photons with MeV-range energies. We compare the nuclear interaction of such a laser pulse with the standard atom-laser interaction. The mean-field description of atoms must be replaced by a rate equation and the classical field strength, far too faint in nuclei, by the dipole transition rate. Significant nuclear excitation occurs for photon numbers much smaller than typical for atoms. That drastically reduces the requirements on the experimental realization of a "flying mirror".

  19. Numerical simulation of LBGK model for high Reynolds number flow

    Institute of Scientific and Technical Information of China (English)

    Zhou Xiao-Yang; Shi Bao-Chang; Wang Neng-Chao

    2004-01-01

    A principle of selecting relaxation parameter was proposed to observe the limit computational capability of the incompressible LBGK models developed by Guo ZL (Guo model) and He SY (He model) for high Reynolds number flow.To the two-dimensional driven cavity flow problem, the highest Reynolds numbers covered by Guo and He models are in the range 58000-52900 and 28000-29000, respectively, at 0.3 Mach number and 1/256 lattice space. The simulation results also show that the Guo model has stronger robustness due to its higher accuracy.

  20. Three-dimensional vortex organization in a high-Reynolds-number supersonic turbulent boundary layer

    NARCIS (Netherlands)

    Elsinga, G.E.; Adrian, R.J.; Van Oudheusden, B.W.; Scarano, F.

    2010-01-01

    Tomographic particle image velocimetry was used to quantitatively visualize the three-dimensional coherent structures in a supersonic (Mach 2) turbulent boundary layer in the region between y/δ = 0.15 and 0.89. The Reynolds number based on momentum thickness Reθ = 34000. The instantaneous velocity f

  1. Cost-effective evolution of research prototypes into end-user tools: The MACH case study

    DEFF Research Database (Denmark)

    Störrle, Harald

    2017-01-01

    this issue; their steep learning curves constitute substantial entry barriers to such ecosystems. In this paper, we present the Model Analyzer/Checker (MACH), a stand-alone tool with a command-line interpreter. MACH integrates a set of research prototypes for analyzing UML models. By choosing a simple......Much of Software Engineering research needs to provide an implementation as proof-of-concept. Often such implementations are created as exploratory prototypes without polished user interfaces, making it difficult to (1) run user studies to validate the tool's contribution, (2) validate the author......'s claim by fellow scientists, and (3) demonstrate the utility and value of the research contribution to any interested parties. However, turning an exploratory prototype into a “proper” tool for end-users often entails great effort. Heavyweight mainstream frameworks such as Eclipse do not address...

  2. Stabilized fiber-optic Mach-Zehnder interferometer for carrier-frequency rejection

    CERN Document Server

    Cooper, Nathan; Bateman, James; Dunning, Alexander; Freegarde, Tim

    2013-01-01

    We have demonstrated stabilization of a fiber-optic Mach-Zehnder interferometer, with a centimeter-scale path difference, to the transmission minimum for the carrier wave of a frequency-modulated laser beam. A time-averaged extinction of 32 dB, limited by the bandwidth of the feedback, was maintained over several hours. The interferometer was used to remove the carrier wave from a 780 nm laser beam that had been phase modulated at 2.7 GHz.

  3. Comte, Mach, Planck, and Eddington: a study of influence across generations

    Science.gov (United States)

    Batten, Alan H.

    2016-04-01

    Auguste Comte is frequently ridiculed by astronomers for saying that human beings would never be able to know the physical nature and constitution of the stars. His philosophy, however, influenced scientists throughout his lifetime and for over a century after his death. That influence is traced here in the work of three outstanding scientists who spanned, roughly speaking, three successive generations after his own, namely, Ernst Mach, Max Planck and Arthur Stanley Eddington.

  4. Mach-Zehnder-based five-port silicon router for optical interconnects.

    Science.gov (United States)

    Li, Xianyao; Xiao, Xi; Xu, Hao; Li, Zhiyong; Chu, Tao; Yu, Jinzhong; Yu, Yude

    2013-05-15

    We propose and fabricate a five-port silicon optical router based on Mach-Zehnder interferometer switches. Only 10 switching elements and five low-loss waveguide crossings are required in our design. Through thermal control of the switching network, we successfully demonstrate 20 possible I/O paths of the five-port optical router at a data transmission rate of 32 Gb/s. The results here show great potential for application in ultrahigh-capacity optical interconnects.

  5. Planar Rayleigh scattering results in helium-air mixing experiments in a Mach-6 wind tunnel

    OpenAIRE

    Shirinzadeh, B.; Hillard, M. E.; Balla, R. Jeffrey; Waitz, I. A.; Anders, J. B.; Exton, R. J.

    1992-01-01

    Planar Rayleigh scattering measurements with an argon—fluoride excimer laser are performed to investigate helium mixing into air at supersonic speeds. The capability of the Rayleigh scattering technique for flow visualization of a turbulent environment is demonstrated in a large-scale, Mach-6 facility. The detection limit obtained with the present setup indicates that planar, quantitative measurements of density can be made over a large cross-sectional area (5 cm × 10 cm) of the flow field in...

  6. Detonation re-initiation mechanism following the Mach reflection of a quenched detonation

    CERN Document Server

    Bhattacharjee, Rohit; Maines, Geoffrey; Maley, Logan; Radulescu, Matei Ioan

    2012-01-01

    This experimental study addresses the re-initiation mechanism of detonation waves following the Mach reflection of a shock-flame complex. The detonation diffraction around a cylinder is used to reproducibly generate the shock-flame complex of interest. The experiments are performed in methane-oxygen. We use a novel experimental technique of coupling a two-in-line-spark flash system with a double-frame camera in order to obtain microsecond time resolution permitting accurate schlieren velocimetry. The first series of experiments compares the non-reactive sequence of shock reflections with the reflection over a rough wall under identical conditions. It was found that the hot reaction products generated along the rough wall are entrained by the wall jet into a large vortex structure behind the Mach stem. The second series of experiments performed in more sensitive mixtures addressed the sequence of events leading to the detonation establishment along the Mach and transverse waves. Following ignition and jet entr...

  7. Paris vs. Prague: A "Suspicion of Fraud": Ernst Mach Argues over Photographs and Epistemological Prerequisites.

    Science.gov (United States)

    Hoffmann, Christoph

    2016-12-01

    Argument In spring 1888, an anonymous critic raised severe doubts about Ernst Mach's and Peter Salcher's studies, published one year before, on the processes in the air caused by very rapid projectiles. Paraphrasing the experiments for the French popular science magazine La Nature, the critic insinuated that the photographs upon which Mach and Salcher's argument were ostensibly based must have been of such low quality that they did not allow any well-founded conclusion. The critic did not deny the phenomena Mach and Salcher had presented in their article; he denied that the photographs taken in the course of the experiments could permit any observation of the phenomena. I take the resulting quarrel as a window into the actors' ideas on the requirements of "good observations" and the role of technical devices in this case. In particular I enquire how the various arguments relate to Lorraine Daston's and Peter Galison's framing of photography as an emblem of "mechanical objectivity." We will see that in the case under debate, actors considered naked-eye observation, observation by telescope and photography mainly with regard to the challenges of the particular research object.

  8. Electro-optic metal-insulator-semiconductor-insulator-metal Mach-Zehnder plasmonic modulator

    Science.gov (United States)

    Thomas, Roney; Ikonic, Zoran; Kelsall, Robert W.

    2012-01-01

    The performance of a CMOS-compatible electro-optic Mach-Zehnder plasmonic modulator is investigated using electromagnetic and carrier transport simulations. Each arm of the Mach-Zehnder device comprises a metal-insulator-semiconductor-insulator-metal (MISIM) structure on a buried oxide substrate. Quantum mechanical effects at the oxide/semiconductor interfaces were considered in the calculation of electron density profiles across the structure, in order to determine the refractive index distribution and its dependence on applied bias. This information was used in finite element simulations of the electromagnetic modes within the MISIM structure in order to determine the Mach-Zehnder arm lengths required to achieve destructive interference and the corresponding propagation loss incurred by the device. Both inversion and accumulation mode devices were investigated, and the layer thicknesses and height were adjusted to optimise the device performance. A device loss of <8 dB is predicted for a MISIM structure with a 25 nm thick silicon layer, for which the device length is <3 μm, and <5 dB loss is predicted for the limiting case of a 5 nm thick silicon layer in a 1.2 μm long device: in both cases, the maximum operating voltage is 7.5 V.

  9. Study on Shock Wave and Turbulent Boundary Layer Interactions in a Square Duct at Mach 2 and 4

    Institute of Scientific and Technical Information of China (English)

    Hiromu SUGIYAMA; Ryojiro MINATO; Kazuhide MIZOBATA; Akira TOJO; Yohei MUTO

    2006-01-01

    In this paper, the outline of the Mach 4 supersonic wind runnel for the investigation of the supersonic internal flows in ducts was firstly described. Secondly, the location, structure and characteristics of the Mach 2 and Mach 4 pseudo-shock waves in a square duct were investigated by color schlieren photographs and duct wall pressure fluctuation measurements. Finally, the wall shear stress distributions on the side, top and bottom walls of the square duct with the Mach 4 pseudo-shock wave were investigated qualitatively by the shear stress-sensitive liquid crystal visualization method. The side wall boundary layer separation region under the first shock is narrow near the top wall, while the side wall boundary layer separation region under the first shock is very wide near the bottom wall.

  10. Refractometric sensor based on all-fiber coaxial Michelson and Mach-Zehnder interferometers for ethanol detection in fuel

    Energy Technology Data Exchange (ETDEWEB)

    Mosquera, L; Osorio, Jonas H; Hayashi, Juliano G; Cordeiro, Cristiano M B, E-mail: lmosquera@uni.edu.pe [Instituto de Fisica ' Gleb Wataghin' , UNICAMP, Campinas - Sao Paulo (Brazil)

    2011-01-01

    A refractometric sensor based on mechanically induced interferometers formed with long period gratings is reported. It is also shown two different setups based on a Michelson and Mach-Zehnder interferometer and its application to measure ethanol concentration in gasoline.

  11. Refractometric sensor based on all-fiber coaxial Michelson and Mach-Zehnder interferometers for ethanol detection in fuel

    Science.gov (United States)

    Mosquera, L.; Osório, Jonas H.; Hayashi, Juliano G.; Cordeiro, Cristiano M. B.

    2011-01-01

    A refractometric sensor based on mechanically induced interferometers formed with long period gratings is reported. It is also shown two different setups based on a Michelson and Mach-Zender interferometer and its application to measure ethanol concentration in gasoline.

  12. Spherical convective dynamos in the rapidly rotating asymptotic regime

    CERN Document Server

    Aubert, Julien; Fournier, Alexandre

    2016-01-01

    Self-sustained convective dynamos in planetary systems operate in an asymptotic regime of rapid rotation, where a balance is thought to hold between the Coriolis, pressure, buoyancy and Lorentz forces (the MAC balance). Classical numerical solutions have previously been obtained in a regime of moderate rotation where viscous and inertial forces are still significant. We define a unidimensional path in parameter space between classical models and asymptotic conditions from the requirements to enforce a MAC balance and to preserve the ratio between the magnetic diffusion and convective overturn times (the magnetic Reynolds number). Direct numerical simulations performed along this path show that the spatial structure of the solution at scales larger than the magnetic dissipation length is largely invariant. This enables the definition of large-eddy simulations resting on the assumption that small-scale details of the hydrodynamic turbulence are irrelevant to the determination of the large-scale asymptotic state...

  13. Kolmogorov entropy of magnetic field lines in the percolation regime

    Energy Technology Data Exchange (ETDEWEB)

    Zimbardo, G; Bitane, R; Pommois, P; Veltri, P [Physics Department, University of Calabria, Arcavacata di Rende (Italy)

    2009-01-15

    We report the first numerical computation of the Kolmogorov entropy h of magnetic field lines extending from the quasilinear up to the percolation regime, using a numerical code where one can change both the turbulence level {delta}B/B{sub 0} and the turbulence anisotropy l{sub ||}/l{sub p}erpendicular. We find that the proposed percolation scaling of h is not reproduced, but rather a saturation of h is obtained. Also, we find that the Kolmogorov entropy depends solely on the Kubo number R = ({delta}B/B{sub 0})(l{sub ||}/l{sub p}erpendicular), and not separately on {delta}B/B{sub 0} and l{sub ||}/l{sub p}erpendicular. We apply the results to electron transport in solar coronal loops, which involves the use of the Rechester and Rosenbluth diffusion coefficient, and show that the study of transport in the percolation regime is required.

  14. FLOW REGIMES BELOW AERATORS FOR DISCHARGE TUNNELS

    Institute of Scientific and Technical Information of China (English)

    MA Fei; WU Jian-hua

    2012-01-01

    The flow regimes below an aerator influence directly the air entrainment and the cavitation damage control.Based on the theoretical considerations,the experiments of the aerator for a discharge tunnel were conducted,and the relationships between the flow regime and hydraulic and geometric parameters were investigated.The results showed that,there are two kinds of threshold values for the flow regime conversions.One is Fr1-2 standing for the conversion from the fully filled cavity to the partially filled cavity,and the other is Fr2-3 which shows the change from the partially filled cavity to the net air cavity.Two empirical expressions were obtained for the conversions of the flow regimes,which can be used in the designs of the aerators.

  15. US Forest Service LANDFIRE Historical Fire Regimes

    Data.gov (United States)

    US Forest Service, Department of Agriculture — Historical fire regimes, intervals, and vegetation conditions are mapped using the Vegetation Dynamics Development Tool (VDDT). These data support fire and landscape...

  16. Figure 1: Basal-Bolus Regime

    African Journals Online (AJOL)

    Siegal_D

    Breakfast. Lunch. Dinner. Bedtime. Plasma insulin concentrations over time with a twice daily insulin mix regime .... Hypoglycaemia. Frequency, severity, awareness, precipitants, driving, ... Post GDM, family members, IGT etc. EXAMINATION.

  17. Regimes of validity for balanced models

    Science.gov (United States)

    Gent, Peter R.; McWilliams, James C.

    1983-07-01

    Scaling analyses are presented which delineate the atmospheric and oceanic regimes of validity for the family of balanced models described in Gent and McWilliams (1983a). The analyses follow and extend the classical work of Charney (1948) and others. The analyses use three non-dimensional parameters which represent the flow scale relative to the Earth's radius, the dominance of turbulent or wave-like processes, and the dominant component of the potential vorticity. For each regime, the models that are accurate both at leading order and through at least one higher order of accuracy in the appropriate small parameter are then identified. In particular, it is found that members of the balanced family are the appropriate models of higher-order accuracy over a broad range of parameter regimes. Examples are also given of particular atmospheric and oceanic phenomena which are in the regimes of validity for the different balanced models.

  18. The Two Regimes of Postwar Shipping

    DEFF Research Database (Denmark)

    Iversen, Martin Jes; Tenold, Stig

    2014-01-01

    The aim of this article is to illustrate the most important changes in the regulatory framework of the shipping sector from the 1960s to 2010, and to analyse the basis for, and effects of, these changes. In order to explain how the transformation has occurred, we use two traditional maritime...... nations—Denmark and Norway—as case studies. First, we introduce the two regimes of Danish and Norwegian shipping: ‘the national regime’ from the early 1960s to the mid-1970s; and ‘the competitive regime’, which was fully established by the middle of the 1990s and still persists. Then, we briefly sketch...... the bargaining that accompanied the shift from the national regime to the competitive regime. Specifically, we show that the new regime primarily accommodated the interests of private actors such as shipping companies, rather than the interests of the authorities and the trade unions....

  19. Exchange rate regimes and external financial stability

    Directory of Open Access Journals (Sweden)

    Stoica Ovidiu

    2016-01-01

    Full Text Available Financial stability within the framework of the global financial crisis has become a common topic for researchers and practitioners. In order to analyse the impact of exchange rate regimes on financial stability we use both the de jure and de facto exchange rate classifications. We apply the model to a 1999-2010 annual data sample for 135 countries and territories, grouped by the level of economic development. Our second focus is the investigation of the effects of the exchange rate regimes in three economic integration areas (member countries of the European Union 27, the Southern Common Market, and the Association of Southeast Asian Nations on financial stability. Our results generally support the central banks’ concerns that the flexibility of exchange rate regimes should be reduced in order to sustain financial stability; however, the findings are not robust when using alternative regime classifications.

  20. High Accuracy Microwave Frequency Measurement Based on Single-Drive Dual-Parallel Mach-Zehnder Modulator

    DEFF Research Database (Denmark)

    Zhao, Ying; Deng, Lei; Pang, Xiaodan

    2011-01-01

    A novel approach for broadband microwave frequency measurement based on bias manipulation of a dual-parallel Mach-Zehnder modulator is proposed and experimentally demonstrated. A 10-3 relative error verifies a significant accuracy improvement by this method.......A novel approach for broadband microwave frequency measurement based on bias manipulation of a dual-parallel Mach-Zehnder modulator is proposed and experimentally demonstrated. A 10-3 relative error verifies a significant accuracy improvement by this method....

  1. Aeroelastic Analyses of the SemiSpan SuperSonic Transport (S4T) Wind Tunnel Model at Mach 0.95

    Science.gov (United States)

    Hur, Jiyoung

    2014-01-01

    Detailed aeroelastic analyses of the SemiSpan SuperSonic Transport (S4T) wind tunnel model at Mach 0.95 with a 1.75deg fixed angle of attack are presented. First, a numerical procedure using the Computational Fluids Laboratory 3-Dimensional (CFL3D) Version 6.4 flow solver is investigated. The mesh update method for structured multi-block grids was successfully applied to the Navier-Stokes simulations. Second, the steady aerodynamic analyses with a rigid structure of the S4T wind tunnel model are reviewed in transonic flow. Third, the static analyses were performed for both the Euler and Navier-Stokes equations. Both the Euler and Navier-Stokes equations predicted a significant increase of lift forces, compared to the results from the rigid structure of the S4T wind-tunnel model, over various dynamic pressures. Finally, dynamic aeroelastic analyses were performed to investigate the flutter condition of the S4T wind tunnel model at the transonic Mach number. The condition of flutter was observed at a dynamic pressure of approximately 75.0-psf for the Navier-Stokes simulations. However, it was observed that the flutter condition occurred a dynamic pressure of approximately 47.27-psf for the Euler simulations. Also, the computational efficiency of the aeroelastic analyses for the S4T wind tunnel model has been assessed.

  2. Measurement and prediction of propeller flow field on the PTA aircraft at speeds of up to Mach 0.85. [Propfan Test Assessment

    Science.gov (United States)

    Aljabri, Abdullah S.

    1988-01-01

    High speed subsonic transports powered by advanced propellers provide significant fuel savings compared to turbofan powered transports. Unfortunately, however, propfans must operate in aircraft-induced nonuniform flow fields which can lead to high blade cyclic stresses, vibration and noise. To optimize the design and installation of these advanced propellers, therefore, detailed knowledge of the complex flow field is required. As part of the NASA Propfan Test Assessment (PTA) program, a 1/9 scale semispan model of the Gulfstream II propfan test-bed aircraft was tested in the NASA-Lewis 8 x 6 supersonic wind tunnel to obtain propeller flow field data. Detailed radial and azimuthal surveys were made to obtain the total pressure in the flow and the three components of velocity. Data was acquired for Mach numbers ranging from 0.6 to 0.85. Analytical predictions were also made using a subsonic panel method, QUADPAN. Comparison of wind-tunnel measurements and analytical predictions show good agreement throughout the Mach range.

  3. Heat transfer tests of the NASA-MSC space shuttle configuration at the Langley Research Center Mach 8 Variable Density Facility

    Science.gov (United States)

    Connor, L. E.; Sparks, V. W.; Bhadsavle, A. G.

    1971-01-01

    The experimental investigations performed on the NASA-Manned Spacecraft Center Space Shuttle orbiter and booster configurations at a Mach 8 variable density facility are presented. The test program was a series of aerothermodynamic wind tunnel tests that were run over a range of angles of attack, yaw angles, and Reynolds numbers. Objectives of the test program were to obtain heat transfer data over the NASA-Manned Spacecraft Center Space Shuttle orbiter, booster, and launch configurations for a range of angles of attack from - 20 to + 30 deg, yaw angles of 0 and + or - 6 deg, and Reynolds numbers of 0.6, 2.0, and 3.7 x one million. The phase-change coating technique was used to obtain heat transfer data. Information received from these tests will be instrumental in performing thermal protection systems studies and vehicle aerodynamic design.

  4. Portfolio Selection with Jumps under Regime Switching

    Directory of Open Access Journals (Sweden)

    Lin Zhao

    2010-01-01

    Full Text Available We investigate a continuous-time version of the mean-variance portfolio selection model with jumps under regime switching. The portfolio selection is proposed and analyzed for a market consisting of one bank account and multiple stocks. The random regime switching is assumed to be independent of the underlying Brownian motion and jump processes. A Markov chain modulated diffusion formulation is employed to model the problem.

  5. Regime-shifting streamflow processes: Implications for water supply reservoir operations

    Science.gov (United States)

    Turner, S. W. D.; Galelli, S.

    2016-05-01

    This paper examines the extent to which regime-like behavior in streamflow time series impacts reservoir operating policy performance. We begin by incorporating a regime state variable into a well-established stochastic dynamic programming model. We then simulate and compare optimized release policies—with and without the regime state variable—to understand how regime shifts affect operating performance in terms of meeting water delivery targets. Our optimization approach uses a Hidden Markov Model to partition the streamflow time series into a small number of separate regime states. The streamflow persistence structures associated with each state define separate month-to-month streamflow transition probability matrices for computing penalty cost expectations within the optimization procedure. The algorithm generates a four-dimensional array of release decisions conditioned on the within-year time period, reservoir storage state, inflow class, and underlying regime state. Our computational experiment is executed on 99 distinct, hypothetical water supply reservoirs fashioned from the Australian Bureau of Meteorology's Hydrologic Reference Stations. Results show that regime-like behavior is a major cause of suboptimal operations in water supply reservoirs; conventional techniques for optimal policy design may misguide the operator, particularly in regions susceptible to multiyear drought. Stationary streamflow models that allow for regime-like behavior can be incorporated into traditional stochastic optimization models to enhance the flexibility of operations.

  6. Control of Stationary Cross-Flow Modes in a Mach 3.5 Boundary Layer Using Patterned Passive and Active Roughness

    Science.gov (United States)

    Schuele, Chan Yong

    2011-01-01

    Spanwise-periodic roughness designed to excite selected wavelengths of stationary cross- ow modes was investigated in a 3-D boundary layer at Mach 3.5. The test model was a sharp-tipped 14deg right-circular cone. The model and integrated sensor traversing system were placed in the Mach 3.5 Supersonic Low Disturbance Tunnel (SLDT) equipped with a "quiet design" nozzle at the NASA Langley Research Center. The model was oriented at a 4:2deg angle of attack to produce a mean cross-fl ow velocity component in the boundary layer over the cone. Five removable cone tips have been investigated. One has a smooth surface that is used to document the baseline ("natural") conditions. Two had minute (20 - 40 micron) "dimples" that are equally spaced around the circumference, at a streamwise location that is just upstream of the linear stability neutral growth branch for cross- ow modes. The azimuthal mode numbers of the dimpled tips were selected to either enhance the most amplified wave numbers, or to suppress the growth of the most amplified wave numbers. Two of the cone tips had an array of plasma streamwise vortex generators that were designed to simulate the disturbances produced by the passive patterned roughness. The results indicate that the stationary cross-fl ow modes were highly receptive to the patterned roughness of both passive and active types. The patterned passive roughness that was designed to suppress the growth of the most amplified modes had an azimuthal wavelength that was 66% smaller that that of the most amplified stationary cross- ow mode. This had the effect to increase the transition Reynolds number from 25% to 50% depending on the measurement technique. The application of the research is on turbulent transition control on swept wings of supersonic aircraft. The plasma-based roughness has the advantage over the passive roughness of being able to be adaptable to different conditions that would occur during a flight mission.

  7. Control of stationary cross-flow modes in a mach 3.5 boundary layer using patterned passive and active roughness

    Science.gov (United States)

    Schuele, Chan Yong

    Spanwise-periodic roughness designed to excite selected wavelengths of stationary cross-flow modes was investigated in a 3-D boundary layer at Mach 3.5. The test model was a sharp-tipped 14° right-circular cone. The model and integrated sensor traversing system were placed in the Mach 3.5 Supersonic Low Disturbance Tunnel (SLDT) equipped with a "quiet design" nozzle at the NASA Langley Research Center. The model was oriented at a 4.2 angle of attack to produce a mean cross-flow velocity component in the boundary layer over the cone. Five removable cone tips have been investigated. One has a smooth surface that is used to document the baseline ("natural") conditions. Two had minute (20 - 40 mum) "dimples" that are equally spaced around the circumference, at a streamwise location that is just upstream of the linear stability neutral growth branch for cross-flow modes. The azimuthal mode numbers of the dimpled tips were selected to either enhance the most amplified wave numbers, or to suppress the growth of the most amplified wave numbers. Two of the cone tips had an array of plasma streamwise vortex generators that were designed to simulate the disturbances produced by the passive patterned roughness. The results indicate that the stationary cross-flow modes were highly receptive to the patterned roughness of both passive and active types. The patterned passive roughness that was designed to suppress the growth of the most amplified modes had an azimuthal wavelength that was 66% smaller that that of the most amplified stationary cross-flow mode. This had the effect to increase the transition Reynolds number from 25% to 50% depending on the measurement technique. The application of the research is on turbulent transition control on swept wings of supersonic aircraft. The plasma-based roughness has the advantage over the passive roughness of being able to be adaptable to different conditions that would occur during a flight mission.

  8. Sum Capacity of Gaussian Interfering Multiple Access Channels in the Low Interference Regime

    CERN Document Server

    Jose, Jubin; Vishwanath, Sriram

    2011-01-01

    This paper establishes the sum capacity of Gaussian interfering multiple access channels (IF-MACs) in a low interference regime. IF-MACs studied consist of two MACs, with arbitrary number of users, interfering with each other. In the low interference regime, treating interference as noise along with successive decoding is shown to be sum rate optimal. The regime characterized in this paper solely depends on the minimum direct to indirect channel gain ratios, net interference to noise ratio and net signal to noise ratio associated with both MACs.

  9. Fiscal Policy and Welfare under Different Exchange Rate Regimes

    DEFF Research Database (Denmark)

    Østrup, Finn

    regime in whichthe monetary authority optimises preferences which include an employment targetand an inflation target. As government spending affects the representativeindividual's utility, the choice of exchange rate regime has an impact on welfare.Keywords: exchange rate regimes; fiscal policy...

  10. Causas estruturais e consequências dos regimes internacionais: regimes como variáveis intervenientes

    OpenAIRE

    Stephen D. Krasner

    2012-01-01

    Os regimes internacionais são definidos como princípios, normas, regras e procedimentos de tomada de decisões ao redor dos quais as expectativas dos atores convergem em uma dada área-tema. Como ponto de partida, os regimes são conceituados como variáveis intervenientes, estando entre fatores causais básicos e os resultados e comportamentos relacionados. Há três visões a respeito da importância dos regimes: as orientações estruturais convencionais desvalorizam os regimes como sendo, na melhor ...

  11. Resettable regime of diesel lubrication

    Directory of Open Access Journals (Sweden)

    Nechaev E. P.

    2016-12-01

    Full Text Available A new method of engine oil saturation by microelements has been presented in the paper; it has been tested on vessels of the fishing fleet and in conditions of prolonged operation in the coastal diesel-engine power plants. The paper considers the results of performance tests of the most common diesel power plants of 6ЧН 25/34 type with the tribochemical reductant oil (TRO apparatus providing tribochemical lubrication. During comparative trials of two diesels the samples of lubricating oil m-10B2 and m-10 have been periodically collected and subjected to spectral analysis. In the samples the number of the following key microelements has been determined: iron (Fe, aluminum (Al, zinc (Zn, sodium (Na, barium (Ba, calcium (Ca, tin (Sn, phosphorus (P, potassium (K, sulfur (S, chlorine (Cl, silicon (Si. During the operation the processes of microelements' extraction and destruction in diesel motor oils evaluated by the relevant coefficients have been clearly manifested. Analyzing the obtained experimental data it should be noted that in both experiments the total balance of the controlled 15 trace elements has been balanced and approached within 1640.5–1650.3 g/t. And the greater measure refers to conventional oil. Stabilization and improvement of physical and chemical properties of motor oil in operation of a diesel engine is possible from the authors' viewpoint only in the tribochemical lubrication mode using the TRO apparatus and created hydrodynamic module – dispersant. The past performance tests suggest the possibility of use as a lubricant the conventional (pure oil under actual operating conditions. When in the tribochemical mode of diesel engine lubrication it has been established that in conventional (pure oil the oily medium has been formed with a spectrum of microelements equivalent to engine oil filler.

  12. Número de perfilhos do capim-braquiária em regime de lotação contínua - doi: 10.4025/actascianimsci.v33i1.10440 Tiller number in signalgrass under continuous stocking systems - doi: 10.4025/actascianimsci.v33i1.10440

    Directory of Open Access Journals (Sweden)

    Simone Pedro da Silva

    2011-02-01

    Full Text Available Objetivou-se identificar, pela avaliação do perfilhamento, as estratégias adequadas de manejo da Brachiaria decumbens cv. Basilisk em lotação contínua com bovinos. Foram estudadas duas estratégias de manejo: pasto com 25 cm de altura durante todo período experimental, e pasto com 15 cm no inverno e 25 cm na primavera e verão. Foram adotados o esquema de parcelas subdivididas e o delineamento em blocos casualizados com quatro repetições. As estratégias de manejo foram o fator primário e as estações (inverno, primavera e verão, o fator secundário. O menor balanço entre taxas de aparecimento (TApP e de mortalidade de perfilhos (TMoP e o menor número de perfilho vegetativo ocorreram no inverno. Na primavera e verão, o balanço e o número de perfilhos vegetativos foram altos e similares. O rebaixamento do pasto no inverno incrementou o balanço entre TApP e TMoP e o número de perfilhos, em relação à sua manutenção em 25 cm. Houve maiores números de perfilhos reprodutivos e mortos no verão e no inverno, respectivamente. Os pastos com 25 cm possuíram maior número de perfilho morto. Em lotação contínua, o rebaixamento da B. decumbens para 15 cm no inverno e sua manutenção em 25 cm na primavera e verão otimiza sua renovação de perfilhos.The study was conducted to identify, through assessments of tillering, appropriate management strategies for Brachiaria decumbens cv. Basilisk under continuous stocking with cattle. Two management strategies were studied: pasture with 25 cm throughout the experimental period, and pasture with 15 cm in winter and 25 cm in spring and summer. A split-plot and randomized block design with four replications were adopted. The management strategies represented the primary factor, and the seasons (winter, spring and summer were the secondary factor. The lowest balance between rates of appearance (TAR and mortality (TMR of tillers and the lowest number of vegetative tillers occurred in winter

  13. Regimes of Internal Rotation in Differentially Rotating White Dwarfs

    Science.gov (United States)

    Wheeler, J. Craig; Ghosh, Pranab

    2017-01-01

    Most viable models of Type Ia supernovae (SN Ia) require the thermonuclear explosion of a carbon/oxygen white dwarf that has evolved in a binary system. Rotation could be an important aspect of any model for SN Ia, whether single or double degenerate, with the white dwarf mass at, below, or above the Chandrasekhar limit. Differential rotation is specifically invoked in attempts to account for the apparent excess mass in the super--Chandrasekhar events. Some earlier work has suggested that only uniform rotation is consistent with the expected mechanisms of angular momentum transport in white dwarfs, while others have found pronounced differential rotation. We show that if the baroclinic instability is active in degenerate matter and the effects of magnetic fields are neglected, both nearly-uniform and strongly-differential rotation are possible. We classify rotation regimes in terms of the Richardson number, Ri. At small values of Ri > 1 produce a regime of nearly-uniform rotation for which the baroclinic viscosity is of intermediate value and scales as σ3. We discuss the gap in understanding of the behavior at intermediate values of Ri and how observations may constrain the rotation regimes attained by nature.

  14. British Columbia's new coalbed methane royalty regime

    Energy Technology Data Exchange (ETDEWEB)

    Molinski, D. [British Columbia Ministry of Energy and Mines, Victoria, BC (Canada). Energy and Minerals Div.

    2002-07-01

    The British Columbia Ministry of Energy and Mines is promoting the development of the coalbed methane (CBM) industry in the province in order to make CBM a viable and competitive investment option for industry. It is establishing a regulatory and fiscal regime for CBM development. Issues of concern regarding CBM development include water production, gas production rates, well numbers, and marginal economics. The features of the CBM royalty regime include a new producer cost of service allowance, the creation of a CBM royalty tax bank to collect excess PCOS allowances, and a royalty tax credit for wells drilled by the end of February, 2004. The marginal well adjustment factor threshold has been raised from 180 mcf per day to 600 mcf per day for CBM only. It was noted that royalties will probably not be payable for several years following the first commercial well because royalties are very depending on capital and operating costs, local infrastructure and price. Royalty regimes cannot save CBM from low gas prices, poor resources or economics. 2 figs.

  15. Analysis of the high Reynolds number 2D tests on a wind turbine airfoil performed at two different wind tunnels

    Science.gov (United States)

    Pires, O.; Munduate, X.; Ceyhan, O.; Jacobs, M.; Madsen, J.; Schepers, J. G.

    2016-09-01

    2D wind tunnel tests at high Reynolds numbers have been done within the EU FP7 AVATAR project (Advanced Aerodynamic Tools of lArge Rotors) on the DU00-W-212 airfoil and at two different test facilities: the DNW High Pressure Wind Tunnel in Gottingen (HDG) and the LM Wind Power in-house wind tunnel. Two conditions of Reynolds numbers have been performed in both tests: 3 and 6 million. The Mach number and turbulence intensity values are similar in both wind tunnels at the 3 million Reynolds number test, while they are significantly different at 6 million Reynolds number. The paper presents a comparison of the data obtained from the two wind tunnels, showing good repeatability at 3 million Reynolds number and differences at 6 million Reynolds number that are consistent with the different Mach number and turbulence intensity values.

  16. Fast magnetic reconnection in the plasmoid-dominated regime.

    Science.gov (United States)

    Uzdensky, D A; Loureiro, N F; Schekochihin, A A

    2010-12-03

    A conceptual model of resistive magnetic reconnection via a stochastic plasmoid chain is proposed. The global reconnection rate is shown to be independent of the Lundquist number. The distribution of fluxes in the plasmoids is shown to be an inverse-square law. It is argued that there is a finite probability of emergence of abnormally large plasmoids, which can disrupt the chain (and may be responsible for observable large abrupt events in solar flares and sawtooth crashes). A criterion for the transition from the resistive magnetohydrodynamic to the collisionless regime is provided.

  17. Regimes of turbulence without an energy cascade

    CERN Document Server

    Barenghi, C F; Baggaley, A W

    2016-01-01

    Experiments and numerical simulations of turbulent $^4$He and $^3$He-B have established that, at hydrodynamic length scales larger than the average distance between quantum vortices, the energy spectrum obeys the same 5/3 Kolmogorov law which is observed in the homogeneous isotropic turbulence of ordinary fluids. The importance of the 5/3 law is that it points to the existence of a Richardson energy cascade from large eddies to small eddies. However, there is also evidence of quantum turbulent regimes without Kolmogorov scaling. This raises the important questions of why, in such regimes, the Kolmogorov spectrum fails to form, what is the physical nature of turbulence without energy cascade, and whether hydrodynamical models can account for the unusual behaviour of turbulent superfluid helium. In this work we describe simple physical mechanisms which prevent the formation of Kolmogorov scaling in the thermal counterflow, and analyze the conditions necessary for emergence of quasiclassical regime in quantum tu...

  18. Interpreting MAD within multiple accretion regimes

    CERN Document Server

    Mocz, Philip

    2014-01-01

    General relativistic magnetohydrodynamic (GRMHD) simulations of accreting black holes in the radiatively inefficient regime show that systems with sufficient magnetic poloidal flux become magnetically arrested disc (MAD) systems, with a well-defined relationship between the magnetic flux and the mass accretion rate. Recently, Zamaninasab (2014) report that the jet magnetic flux and accretion disc luminosity are tightly correlated over 7 orders of magnitude for a sample of 76 radio-loud active galaxies, concluding that the data are explained by the MAD mode of accretion. Their analysis assumes radiatively efficient accretion, and their sample consists primarily of radiatively efficient sources, while GRMHD simulations of MAD thus far have been carried out in the radiatively inefficient regime. We propose a model to interpret MAD systems in the context of multiple accretion regimes, and apply it to the sample in Zamaninasab (2014), along with additional radiatively inefficient sources from archival data. We sho...

  19. Causas estruturais e consequências dos regimes internacionais: regimes como variáveis intervenientes

    Directory of Open Access Journals (Sweden)

    Stephen D. Krasner

    2012-06-01

    Full Text Available Os regimes internacionais são definidos como princípios, normas, regras e procedimentos de tomada de decisões ao redor dos quais as expectativas dos atores convergem em uma dada área-tema. Como ponto de partida, os regimes são conceituados como variáveis intervenientes, estando entre fatores causais básicos e os resultados e comportamentos relacionados. Há três visões a respeito da importância dos regimes: as orientações estruturais convencionais desvalorizam os regimes como sendo, na melhor das hipóteses, ineficazes; as orientações grocianas vêem os regimes como componentes íntimos do sistema internacional; as perspectivas estruturalistas modificadas vêem os regimes como significativos somente em certas condições restritas. Para os argumentos grociano e estruturalista modificado - que concordam com a visão de que os regimes podem influenciar resultados e comportamentos - , o desenvolvimento de regimes é visto como uma função de cinco variáveis causais básicas: auto-interesse egoísta; poder político; normas e princípios difusos; usos e costumes; conhecimento.

  20. Regimes, Non-State Actors and the State System: A 'Structurational' Regime Model

    NARCIS (Netherlands)

    Arts, B.J.M.

    2000-01-01

    Regime analysis has become a popular approach in International Relations theory and in international policy studies. However, current regime models exhibit some shortcomings with regard to (1) addressing non-state actors, and in particular nongovernmental organizations (NGOs), (2) the balancing of

  1. Regimes, Non-State Actors and the State System: A 'Structurational' Regime Model

    NARCIS (Netherlands)

    Arts, B.J.M.

    2000-01-01

    Regime analysis has become a popular approach in International Relations theory and in international policy studies. However, current regime models exhibit some shortcomings with regard to (1) addressing non-state actors, and in particular nongovernmental organizations (NGOs), (2) the balancing of a

  2. Using a Mach-Zehnder interferometer to deduce nitrogen density mapping

    Science.gov (United States)

    Boudaoud, F.; Lemerini, M.

    2015-07-01

    This work presents an optical method using the Mach-Zehnder interferometer. We especially diagnose a pure nitrogen gas subjected to a point to plane corona discharge, and visualize the density spatial map. The interelectrode distance equals 6 mm and the variation of the optical path has been measured at different pressures: 220 Torr, 400 Torr, and 760 Torr. The interferograms are recorded with a CCD camera, and the numerical analysis of these interferograms is assured by the inverse Abel transformation. The nitrogen density is extracted through the Gladstone-Dale relation. The obtained results are in close agreement with values available in the literature.

  3. A Novel Method to Monitor OSNR Using a Mach-Zehnder Interferometer

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A novel method to monitor optical signal to noise ratio using a Mach-Zehnder interferometer is introduced. The OSNR meter is composed of two 3dB couplers, one phase tuner and one power meter which are of low cost. The experiments show that the error of our novel method is less than 0.5dB and the dynamic range is from 10dB to 25dB. They also show that the method works well under different cases of bit rates.

  4. Thermal management for a Mach 5 cruise aircraft using endothermic fuel

    Science.gov (United States)

    Petley, Dennis H.; Jones, Stuart C.

    1990-01-01

    The present thermal management system for a carrier-based Mach 5 cruise-capable aircraft whose propulsion system does not entail cryogenic fuels is predicated on the use of the catalytic endothermic reaction of a petroleum-derived hydrocarbon fuel as the heat sink for engine cooling. The insulation of engine flowpath surfaces reduces cooling requirements. The primary elements of this closed-cycle cooling system are a fuel preheater, a catalytic fuel reactor, and engine wall-cooling panels; a silicone-based liquid polymer is used as the coolant. Structural, weight, and thermal analysis results are presented for each of the primary components.

  5. Lateral-shearing, delay-dithering Mach-Zehnder interferometer for spatial coherence measurement.

    Science.gov (United States)

    Efimov, Anatoly

    2013-11-15

    An image-shearing interferometer of Mach-Zehnder type with corner cubes is introduced for the purpose of measuring spatial coherence at the output of inhomogeneous optical sources, such as multimode fibers (MMFs). One arm of the interferometer is modulated in optical delay to produce dynamic interference fringes. Fringe visibility and the two individual intensities are measured nearly simultaneously to allow direct calculation of the modulus of the complex degree of coherence as a function of the lateral shear between the two interferometer arms. Spatial degree of coherence is measured for a step-index MMF pumped with monochromatic and broadband optical sources.

  6. Developing an Interactive Tutorial on a Mach-Zehnder Interferometer with Single Photons

    CERN Document Server

    Singh, Chandralekha

    2015-01-01

    We are developing a Quantum Interactive Learning Tutorial (QuILT) on a Mach-Zehnder Interferometer with single photons to expose upper-level students in quantum mechanics courses to contemporary applications. The QuILT strives to help students develop the ability to apply fundamental quantum principles to physical situations and explore differences between classical and quantum ideas. The QuILT adapts visualization tools to help students build physical intuition about quantum phenomena and focuses on helping them integrate qualitative and quantitative understanding. We also discuss findings from a preliminary in-class evaluation.

  7. Linearization of Mach-Zehnder modulator using microring-based all-pass filter

    Institute of Scientific and Technical Information of China (English)

    Jianyi Yang; Fan Wang; Xiaoqing Jiang; Hongchang Qu; Yaming Wu; Minghua Wang; Yuelin Wang

    2005-01-01

    @@ By applying the microring resonator to the Mach-Zehnder (MZ) optical modulator and employing the super-linear phase change characteristic of the all-pass filter, the sublinear modulation curve of the conventional MZ modulator is highly linearized. With properly controlled power coupling between the microring and the arm of the MZ modulator, the third-order distortion can be suppressed. If the transmission coefficient is set between 0.25 and 0.42, the linearity range larger than 90% can be easily achieved. The maximum linearity range is even up to 99.5%.

  8. Integrated optical displacement sensor based on asymmetric Mach-Zehnder interferometer chip

    Science.gov (United States)

    Zhao, Ning; Qian, Guang; Fu, Xing-Chang; Zhang, Li-Jiang; Hu, Wei; Li, Ruo-Zhou; Zhang, Tong

    2017-02-01

    Displacement sensor is one of the most important measuring instruments in many automated systems. We demonstrated an integrated optical displacement sensor based on an asymmetric Mach-Zehnder interferometer chip on a flexible substrate. The sensing chip was made of polymer materials and fabricated by lithography and lift-off techniques. Measured results show that the device has a loss of less than 5 dB and a potential sensitivity of about 0.105 rad/μm with quite a large space for promotion. The sensor has advantages of antielectromagnetic interference, high reliability and stability, simple preparing process, and low cost; it will occupy an important place in displacement sensors.

  9. Efficient thermo-optically controlled Mach-Zhender interferometers using dielectric-loaded plasmonic waveguides

    DEFF Research Database (Denmark)

    Gosciniak, J.; Markey, L.; Dereux, A.;

    2012-01-01

    Compact fiber-coupled dielectric-loaded plasmonic Mach-Zehnder interferometers operating at telecom wavelengths and controlled via the thermo-optic effect are reported. Two fabricated structures with Cytop substrate and a ridge made of PMMA or a cycloaliphatic acrylate polymer (CAP) were considered...... showing low switching power of 2.35 mW and switching time in the range of microseconds for a CAP ridge and milliseconds switching time for a PMMA ridge. Full output modulation is demonstrated for the structure with a CAP ridge and 40% modulation with a PMMA ridge. (C) 2012 Optical Society of America...

  10. Asymmetric Mach-Zehnder Interferometer Based Biosensors for Aflatoxin M1 Detection.

    Science.gov (United States)

    Chalyan, Tatevik; Guider, Romain; Pasquardini, Laura; Zanetti, Manuela; Falke, Floris; Schreuder, Erik; Heideman, Rene G; Pederzolli, Cecilia; Pavesi, Lorenzo

    2016-01-06

    In this work, we present a study of Aflatoxin M1 detection by photonic biosensors based on Si₃N₄ Asymmetric Mach-Zehnder Interferometer (aMZI) functionalized with antibodies fragments (Fab'). We measured a best volumetric sensitivity of 10⁴ rad/RIU, leading to a Limit of Detection below 5 × 10(-7) RIU. On sensors functionalized with Fab', we performed specific and non-specific sensing measurements at various toxin concentrations. Reproducibility of the measurements and re-usability of the sensor were also investigated.

  11. Planar Rayleigh scattering results in helium-air mixing experiments in a Mach-6 wind tunnel

    Science.gov (United States)

    Shirinzadeh, B.; Hillard, M. E.; Balla, R. J.; Waitz, I. A.; Anders, J. B.; Exton, R. J.

    1992-01-01

    Planar Rayleigh scattering measurements with an argon-fluoride excimer laser are performed to investigate helium mixing into air at supersonic speeds. The capability of the Rayleigh scattering technique for flow visualization of a turbulent environment is demonstrated in a large-scale, Mach-6 facility. The detection limit obtained with the present setup indicates that planar, quantitative measurements of density can be made over a large cross-sectional area (5 cm x 10 cm) of the flow field in the absence of clusters.

  12. Planar Rayleigh Scattering Results in Helium/Air Mixing Experiments in a Mach 6 Wind Tunnel

    Science.gov (United States)

    Shirinzadeh, B.; Balla, R. Jeffrey; Hillard, M. E.; Anders, J. B.; Exton, R. J.; Waitz, I. A.

    1991-01-01

    Planar Rayleigh scattering measurements using an ArF-excimer laser have been performed to investigate helium mixing into air at supersonic speeds. The capability of the Rayleigh scattering technique for flow visualization of a turbulent environment is demonstrated in a large-scale, Mach 6facility. The detection limit obtained with the present setup indicates that planar, quantitative measurements of density can be made over a large cross sectional area (5 cm by 10 cm) of the flow field in the absence of clusters.

  13. Theoretical Analysis and Experiment of Temperature Stability for Fiber-optic Mach-Zehnder Interferometer Filter

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Fiber-optic Mach-Zehnder interferometer(MZI) can be used as wavelength-multiplexers and demultiplexers. The △L and △φ directly influence the properties of MZI. To lengthen the △L can demultiplex much more wavelengths, but when the △L is longer, the temperature will influence MZI more seriously. A method to solve this problem is proposed, which enables MZI to work stably. The wavelength distance is 0.8nm, and the extinction ratio is high.

  14. Analisis Perbandingan Kinerja Mach-Zehnder berdasarkan Ragam Format Modulasi pada Jaringan FTTH

    Directory of Open Access Journals (Sweden)

    ZULIA NURUL KARIMAH

    2017-01-01

    Full Text Available ABSTRAKPada jurnal ini dibuat pemodelan link FTTH pada software Optisystem 7.0 untuk mengetahui pengaruh dari Kerr effect dengan membandingkan performansi serat optik kaca dan serat optik plastik berdasarkan format modulasi berupa NRZ, RZ, RZ-DPSK, RZ-DQPSK dan CSRZ. Terdapat dua skenario, dengan skenario pertama, variabel input yang diubah adalah format modulasi pada Mach-zehnder, sedangkan pada skenario kedua, variabel yang diubah adalah pemakaian serat optik yang dipakai, yaitu serat optik bahan kaca, plastik dan hybrid kaca plastik. Hasil simulasi menunjukkan dengan efek linier dan non-linier pada kabel kaca yang menghasilkan performansi jaringan dari yang terbaik, dengan Q factor di atas 6 dan BER di bawah 10-9 adalah NRZ, RZ, RZ-DPSK, CSRZ dan RZ-DQPSK. Sedangkan dengan penggunaan kabel PMMA, yang menunjukkan performansi jaringan yang baik adalah dengan konfigurasi G652D-G652D-PMMA pada format modulasi NRZ, RZ, RZ-DPSK dan RZ-DQPSK. Efek non-linier yang terjadi pada jaringan ini hanya SPM dan XPM.Kata kunci: FTTH, mach-zehnder, format modulasi, efek non-linier, GOF, POF.ABSTRACTIn this journal is creating a FTTH link on Optisystem software 7.0 to determine the effect of Kerr effect by comparing the performance of fiber optic glass and plastic optical fiber based on modulation formats such as NRZ, RZ, RZ-DPSK, RZ-DQPSK and CSRZ. There are two scenarios, first, input variables are changed based on format in Mach-zehnder modulator, while in the second scenario, the changed variable is the material of optical fiber, the materials are optical fiber glass, plastic and hybrid plastic and glass. The simulation results based on comparison with linear and nonlinear effects on glass optical fiber, which produce Q factor above 6 and BER below 10-9 are NRZ, RZ, RZ-DPSK, CSRZ and RZ-DQPSK. While the use of PMMA cable, which indicates good network performance is the configuration G652D-G652D-PMMA on the modulation format NRZ, RZ, RZ-DPSK and RZ

  15. Vibration sensing using a tapered bend-insensitive fiber based Mach-Zehnder interferometer.

    Science.gov (United States)

    Xu, Yanping; Lu, Ping; Qin, Zengguang; Harris, Jeremie; Baset, Farhana; Lu, Ping; Bhardwaj, Vedula Ravi; Bao, Xiaoyi

    2013-02-11

    In this study, a novel fiber-optic sensor consisting of a tapered bend-insensitive fiber based Mach-Zehnder interferometer is presented to realize damped and continuous vibration measurement. The double cladding structure and the central coating region of the in-fiber interferometer ensure an enhanced mechanical strength, reduced external disturbance, and a more uniform spectrum. A damped vibration frequency range of 29-60 Hz as well as continuous vibration disturbances ranging from 1 Hz up to 500 kHz are successfully demonstrated.

  16. Early detection of ecosystem regime shifts

    DEFF Research Database (Denmark)

    Lindegren, Martin; Dakos, Vasilis; Groeger, Joachim P.;

    2012-01-01

    methods may have limited utility in ecosystem-based management as they show no or weak potential for early-warning. We therefore propose a multiple method approach for early detection of ecosystem regime shifts in monitoring data that may be useful in informing timely management actions in the face......Critical transitions between alternative stable states have been shown to occur across an array of complex systems. While our ability to identify abrupt regime shifts in natural ecosystems has improved, detection of potential early-warning signals previous to such shifts is still very limited...

  17. Bank Liquidity and Exchange Rate Regimes

    OpenAIRE

    Bunda, Irina; Desquilbet, Jean-Baptiste

    2003-01-01

    International audience; Combining panel data on bank liquidity at the individual level and data on their macroeconomic environment, for a sample of commercial banks in emerging countries between 1995 and 2000, we show that their exists a “bank liquidity smile across exchange rate regimes”. In extreme regimes at both ends of the line, i.e. for pure floating exchange rate regimes at one end and currency boards and dollarized economies at the other end, bank assets are more liquid than in interm...

  18. Markovian quantum master equation beyond adiabatic regime

    Science.gov (United States)

    Yamaguchi, Makoto; Yuge, Tatsuro; Ogawa, Tetsuo

    2017-01-01

    By introducing a temporal change time scale τA(t ) for the time-dependent system Hamiltonian, a general formulation of the Markovian quantum master equation is given to go well beyond the adiabatic regime. In appropriate situations, the framework is well justified even if τA(t ) is faster than the decay time scale of the bath correlation function. An application to the dissipative Landau-Zener model demonstrates this general result. The findings are applicable to a wide range of fields, providing a basis for quantum control beyond the adiabatic regime.

  19. WELFARE REGIMES IN LATIN AMERICA AND CARIBBEAN

    Directory of Open Access Journals (Sweden)

    Melisa Campana-Alabarce

    2015-06-01

    Full Text Available This article provides a characterization of Latin American and Caribbean Welfare regimes in historiographical perspective. Firstly, it makes a review of the emergence conditions of Welfare States in Western Europe and its core features, with particular emphasis on its role as a method to regulate inequalities in industrial capitalism. Dialoguing with it, then stops in the specific configurations that welfare regimes have taken in Latin America during the course of the twentieth century. Finally, it provides a map of its contemporary features and the major challenges that the States of the region face in his capacity as right guarantors for the future.

  20. Light focusing in the Anderson Regime

    CERN Document Server

    Leonetti, Marco; Mafi, Arash; Conti, Claudio

    2014-01-01

    Anderson localization is a regime in which diffusion is inhibited and waves (also electromagnetic waves) get localized. Here we exploit adaptive optics to achieve focusing in disordered optical fibers in the Anderson regime. By wavefront shaping and optimization, we observe the generation of a propagation invariant beam, where light is trapped transversally by disorder, and show that Anderson localizations can be also excited by extended speckled beams. We demonstrate that disordered fibers allow a more efficient focusing action with respect to standard fibers in a way independent of their length, because of the propagation invariant features and cooperative action of transverse localizations.