To Make Long Character-Marked Cuttings From Low-Grade Yellow-Poplar Lumber - Rip First

Science.gov (United States)

Philip A. Araman

1979-01-01

Long, character-marked furniture cuttings are easily obtained when low-grade (2A and 2B Common) yellow-poplar lumber is first ripped into strips and then crosscut to remove objectionable defects. Overall yields of character-marked material using this procedure were 78% from 1 Common and 2A Common and 70% from 2B Common yellow-poplar lumber. Furthermore, 82% of the 1...

Lumber Cost Minimization through Optimum Grade-Mix Selection

Science.gov (United States)

Xiaoqiu Zuo; Urs Buehlmann; R. Edward Thomas; R. Edward Thomas

2003-01-01

Rough mills process kiln-dried lumber into components for the furniture and wood products industries, Lumber is a significant portion of total rough mill costs and lumber quality can have a serious impact on mill productivity. Lower quality lumber is less expensive yet is harder to process. Higher quality lumber is more expensive yet easier to process. The problem of...

Hardwood lumber widths and grades used by the furniture and cabinet industries: Results of a 14-mill survey

Science.gov (United States)

Jan Wiedenbeck; John Brown; Neal Bennett; Everette Rast

2003-01-01

Data on red oak lumber width, length, and grade were collected at 14 furniture and cabinet industry rough mills to identify relationships among these lumber attributes and the degree to which they differ from mill to mill. Also, this information is needed to formulate valid lumber size distributions that will improve the quality of theresults obtained in mill and...

Commercial lumber, round timbers, and ties

Science.gov (United States)

David E. Kretschmann

2010-01-01

When sawn, a log yields round timber, ties, or lumber of varying quality. This chapter presents a general discussion of grading, standards, and specifications for these commercial products. In a broad sense, commercial lumber is any lumber that is bought or sold in the normal channels of commerce. Commercial lumber may be found in a variety of forms, species, and types...

Test of the Center for Automated Processing of Hardwoods' Auto-Image Detection and Computer-Based Grading and Cutup System

Science.gov (United States)

Philip A. Araman; Janice K. Wiedenbeck

1995-01-01

Automated lumber grading and yield optimization using computer controlled saws will be plausible for hardwoods if and when lumber scanning systems can reliably identify all defects by type. Existing computer programs could then be used to grade the lumber, identify the best cut-up solution, and control the sawing machines. The potential value of a scanning grading...

Crook and overlength in hardwood lumber:results from a 14-mill survey

Science.gov (United States)

Jan Wiedenbeck; John Brown; Neal Bennett

2003-01-01

Data on red oak lumber were collected at 14 furniture and cabinet industry rough mills to identify how crook and overlength are related to lumber grade and size from mill to mill. The amount of crook in a sample of dry, 4/4 thickness, red oak lumber was significantly influenced by lumber grade and length, supply region, and mill. There were no differences in crook...

Variations in productivity and performance in grade lumber industries in Kentucky, Pennsylvania, and West Virginia-1982

Science.gov (United States)

Gilbert P. Dempsey; Gilbert P. Dempsey

1987-01-01

Sawmill effectiveness is crucial to the growth and development of wood industries among locales, states, regions, and countries. Productivity ratios, structural factors, and other indicators of economic performance were used to measure the relative productive efficiency of the grade hardwood lumber industries in Kentucky, Pennsylvania, and West Virginia. Despite...

A summary of modulus of elasticity and knot size surveys for laminating grades of lumber

Science.gov (United States)

R. W. Wolfe; R. C. Moody

1981-01-01

A summary of modulus of elasticity (MOE) and knot data is presented for grades of lumber commonly used to manufacture glued-laminated (glulam) timber by the laminating Industry. Tabulated values represent 30 different studies covering a time span of over 16 years. Statistical estimates of average and near-maximum knot sizes as well as mean and coefficient of variation...

Influence of Lumber Volume Maximization on Value in Sawing Hardwood Sawlogs

Science.gov (United States)

Philip H. Steele; Francis G. Wagner; Lalit Kumar; Philip A. Araman

1992-01-01

Research based on applying volume-maximizing sawing solutions to idealized hardwood log forms has shown that average lumber yield can be increased by 6 percent. It is possible, however, that a lumber volume-maximizing solution may result in a decrease in lumber grade and a net reduction in total value of sawn lumber. The objective of this study was to determine the...

Drying of building lumber

Energy Technology Data Exchange (ETDEWEB)

Washimi, Hiroshi

1988-08-20

Dried lumber is classified into air dried and kiln-dried lumber. The water content of kiln-dried lumber is specified by the Japan Agricultural Standards. However, since building lumber varies in such factors as the location where it was growing, species and shape, the standards, though relaxed, are not being observed. In fact, lumbered products which are not ''Kiln-dried'' frequently bear ''kiln-dried lumber'' marks. In an attempt to correct the situation, the Forestry Agency has set up voluntary standards, but problems still remain. The conventional drying method consists of first subjecting the lumber to optimum drying, then letting bending and deformations to freely and fully appear, and follow this with corrective sawing to produce planks straight from end to end. Compared with air dried lumber in terms of moisture content, kiln-dried lumber remains much with same with minimal shrinkage and expansion. For oil-containing resin, such normal treatments as drying by heating, steaming and boiling seem to be quite effective. Kiln drying, which is becoming more and more important with changes in the circulation system, consists of the steaming-drying-heating method and the dehumidizing type drying method. The major factor which determines the drying cost is the number of days required for drying, which depends largely on the kind of lumber and moisture content. The Forestry Angency is promoting production of defoiled lumber. (2 figs, 2 tables)

LamLum : a tool for evaluating the financial feasibility of laminated lumber plants

Science.gov (United States)

E.M. (Ted) Bilek; John F. Hunt

2006-01-01

A spreadsheet-based computer program called LamLum was created to analyze the economics of value- added laminated lumber manufacturing facilities. Such facilities manufacture laminations, typically from lower grades of structural lumber, then glue these laminations together to make various types of higher value laminated lumber products. This report provides the...

Data bank for short-length red oak lumber

Science.gov (United States)

Janice K. Wiedenbeck; Charles J. Gatchell; Elizabeth S. Walker

1994-01-01

This data bank for short-length lumber (less than 8 feet long) contains information on board outlines and defect size and quality for 426 414-inch-thick red oak boards. The Selects, 1 Common, 2A Common, and 3A Common grades are represented in the data bank. The data bank provides the kind of detailed lumber description that is required as input by computer programs...

Using a standing-tree acoustic tool to identify forest stands for the production of mechanically-graded lumber.

Science.gov (United States)

Paradis, Normand; Auty, David; Carter, Peter; Achim, Alexis

2013-03-12

This study investigates how the use of a Hitman ST300 acoustic sensor can help identify the best forest stands to be used as supply sources for the production of Machine Stress-Rated (MSR) lumber. Using two piezoelectric sensors, the ST300 measures the velocity of a mechanical wave induced in a standing tree. Measurements were made on 333 black spruce (Picea mariana (Mill.) BSP) trees from the North Shore region, Quebec (Canada) selected across a range of locations and along a chronosequence of elapsed time since the last fire (TSF). Logs were cut from a subsample of 39 trees, and sawn into 77 pieces of 38 mm × 89 mm cross-section before undergoing mechanical testing according to ASTM standard D-4761. A linear regression model was developed to predict the static modulus of elasticity of lumber using tree acoustic velocity and stem diameter at 1.3 m above ground level (R2 = 0.41). Results suggest that, at a regional level, 92% of the black spruce trees meet the requirements of MSR grade 1650Fb-1.5E, whilst 64% and 34% meet the 2100Fb-1.8E and 2400Fb-2.0E, respectively. Mature stands with a TSF < 150 years had 11 and 18% more boards in the latter two categories, respectively, and therefore represented the best supply source for MSR lumber.

Opportunities for expanded and higher value utilization of No. 3A Common hardwood lumber

Science.gov (United States)

Brian P. Shepley; Jan Wiedenbeck; Robert L. Smith

2004-01-01

The percentage of low-grade material composing the annual hardwood lumber production in the United States is on the rise. As a result, finding markets for low-grade and low-value lumber has been identified as a top priority by researchers and industry associations. This research used the ROMI-RIP and ROMI-CROSS simulation programs to determine specific conditions that...

1992 Data Bank for Red Oak Lumber

Science.gov (United States)

Charles J. Gatchell; Janice K. Wiedenbeck; Elizabeth S. Walker; Elizabeth S. Walker

1992-01-01

The 1992 Data Bank for Red Oak Lumber is a collection of fully described FAS, Selects, No. 1 Common, and No. 2A Common boards (a total of 1,578 at present). The data bank has two unique features to aid in sample selection. The first feature is the double grading of FAS, No. 1 Common, and No. 2A Common boards to reflect the surface area in grading cuttings when grading...

Simulations of solid lumber strength property monitoring tests

Science.gov (United States)

Steve Verrill; David E. Kretschmann; James W. Evans

2017-01-01

Dimension lumber, visually graded in accordance with the National Grading Rule and assigned design values derived in accordance with procedures found in ASTM D 1990, has provided satisfactory performance in homes and other structural applications for many years. This ongoing satisfactory performance depends upon a recognition that all standards are living documents...

Quality drying of hardwood lumber : guidebook -- checklist

Science.gov (United States)

R. S. Boone; M. R. Milota; J. D. Danielson; D. W. Huber

The IMPROVE Lumber Drying Program is intended to increase awareness of the lumber drying system as a critical component in the manufacture of quality lumber. One objective of the program is to provide easy-to-use tools that a kiln operator can use to maintain an efficient kiln operation and therefore improve lumber drying quality. This report is one component of the...

Quality drying of softwood lumber : guidebook - checklist

Science.gov (United States)

M. R. Milota; J. D. Danielson; R. S. Boone; D. W. Huber

The IMPROVE Lumber Drying Program is intended to increase awareness of the lumber drying system as a critical component in the manufacture of quality lumber. One objective of the program is to provide easy-to-use tools that a kiln operator can use to maintain an efficient kiln operation and therefore contribute to lumber drying quality. This report is one component of...

Drying hardwood lumber

Energy Technology Data Exchange (ETDEWEB)

Chow, A T

1988-11-14

Dried lumber is a high-value-added product, especially when it is of high quality. Lumber damaged during the drying operation can represent substantial lost revenue. It has been demonstrated that dehumidification kilns can improve lumber quality, and reduce energy consumption over conventional drying methods. A summary of the literature on drying hardwood lumber, particularly using heat pump dehumidification, has been prepared to allow the information to be readily accessible to Ontario Hydro personnel who work with customers in the lumber industry. For that purpose, this summary has been prepared from the perspective of the customer, a dry kiln operator. Included are brief descriptions of drying schedules, precautions needed to minimize drying defects in the lumber, and rules-of-thumb for selecting and estimating the capital cost of the drying equipment. A selection of drying schedules and moisture contents of green lumber, a glossary of lumber defects and brief descriptions of the possible preventive measures are also included. 10 refs., 8 figs., 4 tabs.

The economic benefits of sorting SPF lumber to be kiln-dried on the basis of initial moisture content

International Nuclear Information System (INIS)

Warren, S.; Johnson, G.

1997-01-01

This study evaluates the economic benefits of sorting green lumber into moisture content classes before kiln-drying. Laser moisture sensing technology was implemented in the sawmill for sorting purposes. The grade outturn and energy savings resulting from shortened drying times were examined. The final moisture content distribution resulting from moisture sorting did not show overdrying or underdrying. Based on grade outturn, the benefits were as much as $15.94 per thousand board feet (MBF) for 2 by 4 by 16 lumber and $19.66 per MBF for 2 by 6 by 16 lumber; energy savings were $1.88 per thousand board feet

Clearwood quality and softwood lumber prices: what's the real premium?

Science.gov (United States)

Thomas R. Waggener; Roger D. Fight

1999-01-01

Diminishing quantities of appearance grade lumber and rising price premiums for it have accompanied the transition from old-growth to young-growth timber. The price premiums for better grades are an incentive for producers to undertake investments to increase the yield of those higher valued products. Price premiums, however, are also an incentive for users to...

Quality drying in a hardwood lumber predryer : guidebook--checklist

Science.gov (United States)

E. M. Wengert; R. S. Boone

The IMPROVE Lumber Drying Program is intended to increase awareness of the lumber drying system as a critical component in the manufacture of quality lumber. One objective of the program is to provide easy-to-use tools that a kiln/predryer operator can use to maintain an efficient drying operation and therefore improve lumber drying quality. This report is one...

Marketing low-grade hardwoods for furniture stock - a new approach

Science.gov (United States)

Hugh W. Reynolds; Charles J. Gatchell

1979-01-01

A hardwood shortage of high-grade lumber exists while there is a surplus of low-grade hardwood timber. Two things are needed for the surplus to correct the shortage: a new manufacturing system and a new marketing technique. Utilization research at the Princeton Forestry Sciences Laboratory has developed the new system for converting low-grade hardwood for furniture use...

78 FR 15053 - Simpson Lumber Company, LLC, Shelton, Washington; Simpson Lumber Company, LLC, Tacoma, Washington...

Science.gov (United States)

2013-03-08

...,372B] Simpson Lumber Company, LLC, Shelton, Washington; Simpson Lumber Company, LLC, Tacoma, Washington; Simpson Lumber Company, LLC, Longview, Washington; Notice of Revised Determination on Reconsideration On... Reconsideration for the workers and former workers of Simpson Lumber Company, LLC, Shelton, Washington (TA-W-81...

Deriving allowable properties of lumber : a practical guide for interpretation of ASTM standards

Science.gov (United States)

Alan Bendtsen; William L. Galligan

1978-01-01

The ASTM standards for establishing clear wood mechanical properties and for deriving structural grades and related allowable properties for visually graded lumber can be confusing and difficult for the uninitiated to interpret. This report provides a practical guide to using these standards for individuals not familiar with their application. Sample stress...

Factors influencing changes in U.S. hardwood log and lumber exports from 1990 to 2011. BioResources

Science.gov (United States)

William G. Luppold; Matthew S. Bumgardner

2013-01-01

Domestic consumption of hardwood products in the United States since 2000 has trended downward, making exports the single most important market for higher grade hardwood lumber and a major market for higher value hardwood logs. Between 1990 and 2011, hardwood lumber exports increased by 46%. During most of this period, Canada was the largest export market for U.S....

Pierce Lumber, Inc.

Science.gov (United States)

The EPA is providing notice of a proposed Administrative Penalty Assessment against Pierce Lumber, Inc. (“Respondent”), located at 1629 13th Street, Belle Plaine, IA for alleged violations of its National Pollutant Discharge Elimination System permit (perm

Grading options for western hemlock "pulpwood" logs from southeastern Alaska.

Science.gov (United States)

David W. Green; Kent A. McDonald; John Dramm; Kenneth Kilborn

Properties and grade yield are estimated for structural lumber produced from No. 3, No. 4, and low-end No. 2 grade western hemlock logs of the type previously used primarily for the production of pulp chips. Estimates are given for production in the Structural Framing, Machine Stress Rating, and Laminating Stock grading systems. The information shows that significant...

Better lumber drying process with a non-greenhouse type solar kiln

Energy Technology Data Exchange (ETDEWEB)

Yang, K C

1979-01-01

The preliminary study of using solar energy for lumber drying in NW Ontario is proven applicable and practical by the evidence of data collected. It was found that lumber seasoning using solar energy in the region is more favorable in the summer than in the winter. The most significant advantages of lumber drying with a solar kiln are: (1) low percentage of drying defect lumber produced; (2) higher strength properties of lumber produced; (3) unlimited sources of heat energy from the sun are available. The longer drying periods with a solar kiln as compared to a conventional steam kiln can be overcome by utilizing a supplemental heat system, e.g., wood residue burner to shorten the drying period. However, some improvements and modification of the existing kiln should be done in order to increase the efficiency of the lumber drying system.

Laminated lumber may be more profitable than sawn lumber

Science.gov (United States)

P. Koch

1976-01-01

By laminating 1/4-in. rotary-cut veneer into structural lumber, manufacturers can expand lumber output by at least 30% without increasing volume logged. The idea merits intensive study. Manufacturing plus raw material costs should total about $142/Mbf; sales price for desirable widths and lengths of the strong laminated product should approach or exceed $200/Mbf.

Automatic Edging and Trimming of Hardwood Lumber

Science.gov (United States)

D. Earl Kline; Eugene M. Wengert; Philip A. Araman

1990-01-01

Studies have shown that there is a potential to increase hardwood lumber value by more than 20 percent through optimum edging and trimming. Even a small portion of this percentage can boost the profitability of hardwood lumber manufacturers substantially. The objective of this research project is to develop an automated system which would assist in correct edging and...

Influence of Lumber Volume Maximization in Sawing Hardwood Sawlogs

Science.gov (United States)

Philip H. Steele; Francis G. Wagner; Lalit Kumar; Philip A. Araman

1993-01-01

The Best Opening Face (BOF) technology for volume maximization during sawing has been rapidly adopted by softwood sawmills. Application of this technology in hardwood sawmills has been limited because of their emphasis on sawing for the highest possible grade of lumber. The reason for this emphasis is that there is a relatively large difference in price between the...

Trends in lumber processing in the Western United States. Part II: Overrun and lumber recovery factors.

Science.gov (United States)

Charles E. Keegan; Todd A. Morgan; Keith A. Blatner; Jean M. Daniels

2010-01-01

This article describes trends in three measures of lumber recovery for sawmills in the western United States: lumber overrun (LO), lumber recovery factor (LRF), and cubic lumber recovery (CLR). All states and regions showed increased LO during the last three decades. Oregon and Montana had the highest LO at 107 and 100 percent, respectively. Alaska had the lowest LO at...

Softwood Lumber – Some Lessons from the Last Softwood (Lumber IV Dispute

Directory of Open Access Journals (Sweden)

Elaine Feldman

2017-10-01

Full Text Available The checkered history of softwood lumber disputes between Canada and its southern neighbour stretches back to the 1800s, with five of them occurring since 1982. Two years ago, the settlement obtained in 2006 expired and most Canadian softwood lumber exporters now face a combined countervailing and anti-dumping duty rate from the Americans of around 27 per cent. On the surface, the last dispute, known as Lumber IV, appeared to be a squabble over subsidization and dumping of Canadian softwood lumber exports. However, closer scrutiny revealed that this dispute was really about commercial interests triumphing over policy – the U.S. lumber industry wanted to ensure it kept a certain share of the market at the highest price possible. Complicating attempts to resolve any dispute is the fact that Canada is not a single entity in the lumber business; interest in quota or duties varies across regions as do the countervailing (CVD and anti-dumping (AD rates that the U.S. imposes on particular Canadian producers. These variations thus create almost a divide-and-conquer situation in which one group of producers feels others are getting an advantage. The Canadian industry instead should be standing together as much as possible, creating a united front in any dispute with the U.S. Drafting new policy and resorting to litigation to settle Lumber IV failed because the potential settlement got bogged down by the drawbacks of both of those routes. Policy failed because it quickly became clear that the U.S. was going to act with impunity to determine whether there was a subsidy, regardless of what the trade rules permitted. And litigation created an endless loop in which contradictory rulings were handed back and forth between NAFTA panels and the U.S. International Trade Commission, stalling any resolution. Lumber IV also taught the Canadians that taking their complaints to both NAFTA and the World Trade Organization, which does not order a refunding of wrongly

Community Geothermal Technology Program: Experimental lumber drying kiln. Final report

Energy Technology Data Exchange (ETDEWEB)

Leaman, D.; Irwin, B.

1989-10-01

Goals were to demonstrate feasibility of using the geothermal waste effluent from the HGP-A well as a heat source for a kiln operation to dry hardwoods, develop drying schedules, and develop automatic systems to monitor/control the geothermally heated lumber dry kiln systems. The feasibility was demonstrated. Lumber was dried in periods of 2 to 6 weeks in the kiln, compared to 18 months air drying and 6--8 weeks using a dehumidified chamber. Larger, plate-type heat exchangers between the primary fluid and water circulation systems may enable the kiln to reach the planned temperatures (180--185 F). However, the King Koa partnership cannot any longer pursue the concept of geothermal lumber kilns.

Factors affecting regional changes in hardwood lumber production

Science.gov (United States)

William G. Luppold; Gilbert P. Dempsey; Gilbert P. Dempsey

1994-01-01

Hardwood lumber production increased by nearly 1.8 billion board feet between 1986 and 1990 and decreased sharply in 1991. However, not all areas of the country experienced the same growth in hardwood lumber production during the 1980s. While lumber production in inland regions of the eastern United States and the west increased during the 1980s, lumber output in...

Evolution of tensile design stresses for lumber

Science.gov (United States)

William L. Galligan; C. C. Gerhards; R. L. Ethington

1979-01-01

Until approximately 1965, allowable design stresses for lumber in tension were taken as equal to those assigned for bending. As interest in tensile properties increased, testing machines were designed specifically to stress lumber in tension. Research results that accumulated on tensile tests of full-size lumber suggested lower design stresses for tension than for...

Lumber defect detection by ultrasonics

Science.gov (United States)

K. A. McDonald

1978-01-01

Ultrasonics, the technology of high-frequency sound, has been developed as a viable means for locating most defects In lumber for use in digital form in decision-making computers. Ultrasonics has the potential for locating surface and internal defects in lumber of all species, green or dry, and rough sawn or surfaced.

Identifying and locating surface defects in wood: Part of an automated lumber processing system

Science.gov (United States)

Richard W. Conners; Charles W. McMillin; Kingyao Lin; Ramon E. Vasquez-Espinosa

1983-01-01

Continued increases in the cost of materials and labor make it imperative for furniture manufacturers to control costs by improved yield and increased productivity. This paper describes an Automated Lumber Processing System (ALPS) that employs computer tomography, optical scanning technology, the calculation of an optimum cutting strategy, and 1 computer-driven laser...

Accelerated conventional temperature drying of 30mm thick rubberwood lumber

Directory of Open Access Journals (Sweden)

Suthon Srivaro1,

2008-07-01

Full Text Available Lumber drying is the most energy and time consuming process within the rubberwood lumber industry. The aim ofthis study was to develop an effective drying schedule for rubberwood lumber by accelerating the moisture movement out oflumber without degrading the lumber during drying. The study explored the effect of dry bulb temperature (60oC, 75oC and90oC, steaming at the beginning of drying, predrying of lumber prior to drying, and top loading of lumber on the dryingcharacteristics and lumber quality (bow, crook, twist, end splitting and color of 30mm thick rubberwood lumber under thetarget EMC at 4% and air velocity of 4m/s. Accelerated conventional temperature drying of lumber at 90oC reduced thedrying time by ~50% from 117 hours to 54 hours but increased the energy consumption by 22% with respect to the conventionaltemperature drying at 60oC. The average activation energy for drying was 26 kJ/mol. Drying temperature had verylittle effect on quality of lumber after drying (bow, crook, twist, end splitting and color. Steaming at the beginning of dryingand predrying of lumber prior to drying reduced and increased the percentage of end splitting, respectively. A top load ofabout 300 kg/m2 slightly decreased twist. Drying at higher temperatures produced more casehardening within the lumber butconditioning at higher temperatures was more effective in releasing the residual stress generated by drying. After conditioningat high temperatures prong of less than 0.5° casehardening was obtained.

An econometric model of the hardwood lumber market

Science.gov (United States)

William G. Luppold

1982-01-01

A recursive econometric model with causal flow originating from the demand relationship is used to analyze the effects of exogenous variables on quantity and price of hardwood lumber. Wage rates, interest rates, stumpage price, lumber exports, and price of lumber demanders' output were the major factors influencing quantities demanded and supplied and hardwood...

The automatic lumber planing mill

Science.gov (United States)

Peter Koch

1957-01-01

It is probable that a truly automatic planning operation could be devised if some of the variables commonly present in the mill-run lumber were eliminated and the remaining variables kept under close control. This paper will deal with the more general situation faced by mostl umber manufacturing plants. In other words, it will be assumed that the incoming lumber has...

An assessment of the industrial markets for softwood clearwood lumber.

Science.gov (United States)

Ivan L. Eastin; Christine L. Lane; Roger D. Fight; Jamie Barbour

1998-01-01

The purpose of this project was to assess market opportunities for second growth clearwood lumber by identifying industry segments that currently utilize clearwood lumber and determining whether alternative markets will continue to exist for clearwood lumber produced from intensively managed forests in the Pacific Northwest. A survey of industrial lumber...

Growth and shifts in eastern hardwood lumber production

Science.gov (United States)

William G. Luppold; Gilbert P. Dempsey

1993-01-01

An analysis of recent trends in eastern U.S. hardwood lumber production indicates that total output increased sharply between 1977 and 1991. The increase, however, was much more pronounced in the East's northern tier of states than in the southern. This paper first examines recent hardwood lumber usage trends and historic hardwood lumber production trends. Changes...

Four test-demonstrations of hardwood log grades in the Northeast

Science.gov (United States)

George E. Doverspike; Harry W., Jr. Camp

1951-01-01

Farmers don't sell prime steers for the same price per pound as canner cows. Lumber dealers don't sell top-quality boards for the same price as Number 3 Common. If you are a timber owner, why should you sell hardwood trees or logs without considering their quality? Logs that yield a high proportion of their volume in the better grades of lumber are certainly...

Factors determining lumber recovery in sawmilling

Science.gov (United States)

Philip H. Steele

1984-01-01

Lumber volume recovery in sawmilling is determined by a confusing interaction of several factors. The more one knows about each individual factor, the more one can understand how the factors interact. The author identifies and discusses in detail seven factors influencing lumber recovery. Past and current research is cited, and examples are given to illustrate the...

Form and toxicity of copper released into marine systems from conventionally and nano-sized copper treated lumber

Science.gov (United States)

The fate and effects of pristine engineered nanomaterials (ENMs) in simplified systems have been widely studied; however, little is known about the potential release and impact of ENMs from consumer goods, especially lumber that has been treated with micronized copper. Micronized...

Grading sugar pine saw logs in trees.

Science.gov (United States)

John W. Henley

1972-01-01

Small limbs and small overgrown limbs cause problems when grading saw logs in sugar pine trees. Surface characteristics and lumber recovery information for 426 logs from 64 sugar pine trees were examined. Resulting modifications in the grading specification that allow a grader to ignore small limbs and small limb indicators do not appear to decrease the performance of...

Pierce Lumber, Inc. - Clean Water Act Public Notice

Science.gov (United States)

The EPA is providing notice of a proposed Administrative Penalty Assessment against Pierce Lumber, Inc. (“Respondent”), located at 1629 13th Street, Belle Plaine, IA for alleged violations of its National Pollutant Discharge Elimination System permit (perm

Burst fracture of the fifth lumber vertebra

International Nuclear Information System (INIS)

Cao Hetao; Hu Zhenmin; Shi Yuxin

1999-01-01

Objective: To investigate the stability of the fifth lumber vertebra after burst fracture. Methods: 7 patients with burst fracture of the fifth lumber vertebra were examined by X-ray and CT, and followed for 6-36 months. The changes of wedge index, lordosis, degree of spinal canal stenosis and neurological features were observed during the episode and followed up. Results: The three spinal column structure was disrupted in 6 of 7 patients. The anterior and mid columns were involved in 1 case. Spinal stenosis of first and second degrees was seen in 3 cases, and in one case, there was no spinal canal stenosis. Lower lumber motor-root deficits were found in 2 of 7 patients and resolved in follow up. There was no tendency of progressive collapse of the vertebral body and spinal stenosis. Conclusions: Burst fracture of the fifth lumber vertebra was specific, most of them were stable fractures, although two or three columns of the spine were disrupted and accompanied by spinal canal stenosis

Burst fracture of the fifth lumber vertebra

Energy Technology Data Exchange (ETDEWEB)

Hetao, Cao; Zhenmin, Hu; Yuxin, Shi [Affiliated Hosptial of Nantong Medical College, JS, Nantong (China). Dept. of Radiology

1999-04-01

Objective: To investigate the stability of the fifth lumber vertebra after burst fracture. Methods: 7 patients with burst fracture of the fifth lumber vertebra were examined by X-ray and CT, and followed for 6-36 months. The changes of wedge index, lordosis, degree of spinal canal stenosis and neurological features were observed during the episode and followed up. Results: The three spinal column structure was disrupted in 6 of 7 patients. The anterior and mid columns were involved in 1 case. Spinal stenosis of first and second degrees was seen in 3 cases, and in one case, there was no spinal canal stenosis. Lower lumber motor-root deficits were found in 2 of 7 patients and resolved in follow up. There was no tendency of progressive collapse of the vertebral body and spinal stenosis. Conclusions: Burst fracture of the fifth lumber vertebra was specific, most of them were stable fractures, although two or three columns of the spine were disrupted and accompanied by spinal canal stenosis

The state of hardwood lumber markets

Science.gov (United States)

Gilbert P. Dempsey; William G. Luppold

1992-01-01

Although the 1990-91 recession has temporarily dampened the demand for hardwood lumber, the decade of the 1980s was a period of strong growth in the hardwood market. After experiencing a flat market in 1980 and a decline in 1982, the demand for hardwood lumber by both the domestic industry and the export market increased strongly—from 8 billion board feet in 1982 to 11...

Boron Diffusion in Surface-Treated Framing Lumber

Science.gov (United States)

Patricia K. Lebow; Stan T. Lebow; Steven A. Halverson

2013-01-01

The extent of boron penetration in framing lumber treated by spray applications during construction is not well quantified. This study evaluated the effect of formulation and concentration on diffusion of boron in lumber specimens that were equilibrated in conditions that produced wood moisture contents of 18 to 21 percent. One set of specimens was pressure treated...

INDUSTRIAL EVALUATION OF RE-DRY STRATEGY FOR SOFTWOOD LUMBER

OpenAIRE

Elustondo, Diego; Avramidis, Stavros

2005-01-01

This paper presents an experimental evaluation of the first commercial scale dry-sort-redry (DSRD) strategy for drying of 2x4 Pacific coast hemlock (PCH) lumber. The DSRD strategy is a methodology designed to reduce final moisture content variability in kiln dried lumber by complementing conventional drying with radio frequency vacuum (RFV) drying technology. The strategy′s objective is to avoid producing over-dried lumber in conventional drying by setting the target moisture content to...

Influence of markets and forest composition on lumber production in Pennsylvania

Science.gov (United States)

William G. Luppold; Matthew S. Bumgardner

2006-01-01

In this study, we examine regional differences in the hardwood timber resources of Pennsylvania and how the combined changes in inventory volume, forest composition, and lumber prices have influenced regional lumber production. Isolation of these relationships is important because shifts in lumber production reflect changes in harvesting activity. In turn, harvesting...

Match Your Hardwood Lumber to Current Market Needs

Science.gov (United States)

Robert J. Bush; Steven A. Sinclair; Philip A. Araman

1990-01-01

This article explains how hardwood lumber producers can best market their product. The study included four segments of the market for hardwood lumber. These segments were: furniture, cabinet, dimension and flooring, and molding/millwork manufacturers. The article explains how the study was conducted and the characteristics of companies (i.e., potential customers) that...

An ultrasonic technique for predicting tensile strength of southern pine lumber

Science.gov (United States)

D. Rajeshwar; D.A. Bender; D.E. Bray; K.A. McDonald

1997-01-01

The goal of this research was to develop nondestructive evaluation (NDE) technology to enhance mechanical stress rating of lumber. An ultrasonic NDE technique was developed that is sensitive to grain angle and edge knots in lumber - two primary determinants of lumber strength. The presence of edge knots increased the acoustic wave travel time and selectively...

Quality Characteristics of Appalachian Red Oak Lumber

Science.gov (United States)

Janice K Wiedenbeck; Charles J. Gatchell; Elizabeth S. Walker

1995-01-01

Red oak lumber defect information derived from a well-constructed board data bank was analyzed. The potential utility of No. 1 Common and No. 2A Common lumber is indicated by the finding that 23 percent of the No. 1 Common boards and 35 percent of the No. 2A Common boards in the data bank contain clear-face cutting percentages that meet the minimum requirement for the...

Regional analysis of hardwood lumber production: 1963 - 2005

Science.gov (United States)

William Luppold; Matthew Bumgardner

2008-01-01

Between 1963 and 2005 hardwood lumber production in the eastern United States increased by more than 50%. Production more than doubled in the northeastern and north central regions while increasing by less than 25% in the southeastern and south central regions. Increased lumber production in the northern regions was facilitated by an expanding sawtimber inventory,...

Evolution of allowable stresses in shear for lumber

Science.gov (United States)

Robert L. Ethington; William L. Galligan; Henry M. Montrey; Alan D. Freas

1979-01-01

This paper surveys research leading to allowable shear stress parallel to grain for lumber. In early flexure tests of lumber, some pieces failed in shear. The estimated shear stress at time of failure was generally lower than shear strength measured on small, clear, straight-grained specimens. This and other engineering observations gave rise to adjustments that...

Life cycle inventory of oil palm lumber production: A gate-to-gate case study

Science.gov (United States)

Shamsudin, Noor Ainna; Sahid, Ismail; Mokhtar, Anis; Muhamad, Halimah; Ahmad, Shamim

2018-04-01

Life Cycle Assessment (LCA) has been applied in the Malaysian oil palm industry since 2010. It is important to ensure that this main industry is ready to meet the demands and expectations of European market on the environmental performance of the oil palm industry. In addition, oil palm biomass, especially oil palm trunk (OPT) are abundantly available after replanting every year. In order to maximize the usage of OPT as a green product, it can be converted to palm lumber as a value-added product. Palm lumber act as a basis product from OPT before it is converted to panel product such as plywood, sandwich board and so on. However, the LCA study on palm lumber production is still scarce in Malaysia. Hence, this paper aims to perform and collect the inventory data for palm lumber production, which is known as Life Cycle Inventory (LCI). A gate-to-gate system boundary and the functional unit of 1 m3 of palm lumber produced have been used in this study. This inventory data was collected from three batches of the production cycle. The inputs are mainly the raw materials which are the OPT and the energy from diesel and electricity from the grid. Generally, each consumption of input such as energy and fossil fuel were different at each stage of palm lumber production. Kiln-drying represents a prominent stage in terms of energy consumption, which electrical use in the dryer represents 94% of total electrical grid consumption as compared to another stage of palm lumber production. By adding the inventory information especially in the downstream sector of biomass industry, hopefully it can improve the sustainability of oil palm industry in Malaysia.

Preliminary Full-Scale Tests of the Center for Automated Processing of Hardwoods' Auto-Image

Science.gov (United States)

Philip A. Araman; Janice K. Wiedenbeck

1995-01-01

Automated lumber grading and yield optimization using computer controlled saws will be plausible for hardwoods if and when lumber scanning systems can reliably identify all defects by type. Existing computer programs could then be used to grade the lumber, identify the best cut-up solution, and control the sawing machines. The potential value of a scanning grading...

Examination of worldwide hardwood lumber production, trade, and apparent consumption: 1995-2013

Science.gov (United States)

William G. Luppold; Matthew S. Bumgardner

2015-01-01

Worldwide hardwood lumber production fluctuated between 1995 and 2013 and changed considerably with respect to regional market shares. Similarly, worldwide hardwood lumber imports and exports have been constantly changing. Understanding these changes is important because collectively, they define the hardwood lumber consumption of a region or country. In 1995, North...

Regional Changes in the Timber Resources of and Lumber Production in Pennsylvania

Science.gov (United States)

William G. Luppold; Matthew S. Bumgardner; Matthew S. Bumgardner

2005-01-01

In this study we examine regional differences in the hardwood timber resources of Pennsylvania and explain how the combined changes in this resource and in lumber prices have influenced regional lumber production. Isolation of these relationships is important because shifts in lumber production affect harvesting levels and harvesting activity influences long-term...

40 years of hardwood lumber comsumption: 1963 to 2002

Science.gov (United States)

William Luppold; Matthew Bumgardner

2008-01-01

An analysis of hardwood lumber consumption found that demand has changed dramatically over the past four decades as a result of material substitution, changes in construction and remodeling products markets, and globalization. In 1963 furniture producers consumed 36 percent of the hardwood products lumber used by domestic manufacturers. Producers of hardwood...

Why do stumpage prices increase more than lumber prices?

Science.gov (United States)

William G. Luppold; John E. Baumgras; John E. Baumgras

1998-01-01

Every sawmiller who has been in business more than 5 years realizes that hardwood stumpage prices tend to increase faster than lumber prices, decreasing the margin between these two prices. Although increases in stumpage versus lumber prices are readily apparent, the reason for the decrease in the margin is not. Recent research findings indicate that the stumpage/...

Impacts of changing hardwood lumber consumption and price on stumpage and sawlog prices in Ohio

Science.gov (United States)

William Luppold; Matthew Bumgardner; T. Eric. McConnell

2014-01-01

In the early 2000s, increasing US furniture imports preceded declining US hardwood lumber demand and price. In the summer of 2002, however, hardwood lumber prices started to increase as demand by construction industries increased. By the mid-2000s, hardwood lumber prices hit all-time highs. Lumber prices hit all-time highs for red oak (Quercus spp...

29 CFR Appendix B to Subpart M of... - Guardrail Systems

Science.gov (United States)

2010-07-01

..., DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Fall Protection Pt. 1926... § 1926.502. (1) For wood railings: Wood components shall be minimum 1500 lb-ft/in2 fiber (stress grade) construction grade lumber; the posts shall be at least 2-inch by 4-inch (5 cm×10 cm) lumber spaced not more...

Life-cycle inventory of manufacturing hardwood lumber in Southeastern US

Science.gov (United States)

Richard D. Bergman; Scott A. Bowe

2012-01-01

Environmental impacts associated with the building industry have become of increasing importance. Materials and energy consumed during manufacture of building materials such as lumber affect a building’s environmental performance. This study determined environmental impacts of manufacturing hardwood lumber in the southeastern US using the life-cycle inventory method....

Economic analysis of the Canada-United States softwood lumber dispute : playing the quota game

NARCIS (Netherlands)

Kooten, van G.C.

2002-01-01

The Canada-U.S. Softwood Lumber Agreement (SLA) was the latest measure to restrict Canadian exports of softwood lumber to the United States. Rather than a countervail duty or export tax, SLA employed a quota that provides a large windfall (quota) rent to Canadian lumber producers in addition to

29 CFR 780.200 - Inclusion of forestry or lumbering operations in agriculture is limited.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Inclusion of forestry or lumbering operations in agriculture is limited. 780.200 Section 780.200 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR... Lumbering Operations § 780.200 Inclusion of forestry or lumbering operations in agriculture is limited...

Automatic scanning of rough hardwood lumber for edging and trimming

Science.gov (United States)

A. Lynn Abbott; Daniel L. Schmoldt; Philip A. Araman; Sang-Mook Lee

2001-01-01

Scanning of unplaned, green hardwood lumber has received relatively little attention in the research community. This has been due in part to the difficulty of clearly imaging fresh-cut boards whose fibrous surfaces mask many wood features. Nevertheless, it is important to improve lumber processing early in the manufacturing stream because much wood material is...

Reducing lumber thickness variation using real-time statistical process control

Science.gov (United States)

Thomas M. Young; Brian H. Bond; Jan Wiedenbeck

2002-01-01

A technology feasibility study for reducing lumber thickness variation was conducted from April 2001 until March 2002 at two sawmills located in the southern U.S. A real-time statistical process control (SPC) system was developed that featured Wonderware human machine interface technology (HMI) with distributed real-time control charts for all sawing centers and...

Influence of Product and Supplier Attributes on Hardwood Lumber Purchase Decisions

Science.gov (United States)

Craig L. Forbes; Steven A. Sinclair; Robert J. Bush; Philip A. Araman

1994-01-01

This study determined the influence of product and supplier attributes on hardwood lumber purchases by wood furniture manufacturers and investigated differences across manufacturer type, geographic region, firm size, and kiln ownership. Professional lumber buyers rated the importance and difference across suppliers of various attributes. Purchase influence scores were...

Comparison of the reliability of two hydronephrosis grading systems: The Society for Foetal Urology grading system vs. the Onen grading system

International Nuclear Information System (INIS)

Kim, S.-Y.; Kim, M.-J.; Yoon, C.S.; Lee, M.S.; Han, K.H.; Lee, M.-J.

2013-01-01

Aim: To compare the reliability of the conventional ultrasonography grading system for hydronephrosis as suggested by the Society for Fetal Urology (SFU) in 1993 and that developed by Onen in 2007. Materials and methods: One hundred and eighty kidneys in 90 paediatric patients were assessed by four radiologists using each of the two grading systems twice. The SFU system was graded 0–4 (0 = no hydronephrosis; 1 = visualized only renal pelvis; 2 = plus a few caliceal dilatation; 3 = all calyceal dilatation; 4 = plus parenchymal thinning). The Onen system was graded 0–4 (0 = no hydronephrosis; 1 = only renal pelvic dilatation; 2 = plus caliceal dilatation; 3 = plus 50% renal parenchymal loss). Cohen's kappa statistic was used to estimate intra- and interobserver agreement. The weighted least-squares approach was used to compare the intra-observer agreement, and bootstrapping was used to compare the interobserver agreement between the two systems. Results: Intra-observer agreement was substantial to almost perfect in both the SFU (κ 0.79–0.95) and the Onen (κ 0.66–0.97) grading system without difference. The overall interobserver agreement was substantial in both the SFU (κ 0.61–0.68) and the Onen (κ 0.66–0.76) grading system. However, interobserver agreement was fair to moderate for SFU grades 1 and 2 and Onen grades 2 and 3. Conclusion: Both the SFU and Onen grading system are reliable with good intra- and interobserver agreement. However, decreased interobserver agreement was demonstrated for SFU grades 1 and 2 and Onen grades 2 and 3

International trade of U.S. hardwood lumber and logs, 1990-2013

Science.gov (United States)

William G. Luppold; Matthew S. Bumgardner

2014-01-01

United States (U.S.) hardwood log and lumber exports surged in the early- and mid-1970s in response to the adoption of floating exchange rates. However, assessing these changes in international trade became difficult in the 1980s due to increased underreporting of hardwood lumber and log shipments between the U.S. and Canada. By 1990, these data problems were rectified...

Drying hard maple (Acer saccharum L.) lumber in a small dehumidification kiln

Science.gov (United States)

Neal. Bennett

2013-01-01

Portable sawmill owners quickly recognize the advantage to kiln drying lumber they produce. Having the ability to provide properly kiln-dried lumber opens new market opportunities and can increase profit margins. However, the construction and operation of a dry kiln must be economical and simple. A small dehumidification dry kiln constructed and tested in Princeton, WV...

The international hardwood lumber market and potential impacts on your bottom line

Science.gov (United States)

Bill Luppold; Matthew. Bumgardner

2014-01-01

Even if you don't sell logs or lumber to foreign customers, the international hardwood market can impact your business in significant ways, and smart business leaders are taking notice so that they are ready for shifting market impacts. Many people believe that lumber exporting is only an opportunity for larger sawmills. However, even if you have a portable mill...

76 FR 24479 - In the Matter of the Taylor Lumber and Treating Superfund Site, Sheridan, Oregon, Amendment to...

Science.gov (United States)

2011-05-02

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9300-9] In the Matter of the Taylor Lumber and Treating... Taylor Lumber and Treating Site, which PWPO was acquiring, in exchange for several obligations related to...-553- 0705. Comments should reference the Taylor Lumber and Treating Superfund Site in Sheridan, Oregon...

Tensile and dimensional properties of wood strands made from plantation southern pine lumber

Science.gov (United States)

Qinglin Wu; Zhiyong Cai; Jong N. Lee

2005-01-01

Working stresses and performance of strand composite lumber largely depend upon the properties of each individual strand. Southern pine strands from plantation lumber grown in southern Louisiana were investigated in this study in order to understand strand behaviors. The effects of hot-pressing and resin application on tensile modulus, strength, and dimensional...

Interfacial Adhesion and Damping Characteristics of Laminated Veneer Lumber Intercalated with Rubber Sheets

Directory of Open Access Journals (Sweden)

Jingquan Han

2016-06-01

Full Text Available Laminated wood veneer lumber intercalated with rubber sheets (LLVR was fabricated using a layered adhesive system composed of polyaryl polymethylene isocyanate (PAPI for wood-rubber inter-bonding and phenol formaldehyde (PF resin to glue the wood veneers. The optimized manufacturing process (chloroprene rubber: CR; PAPI: 80 g/m2; PF: 200 g/m2; and silane: 9.0 wt.% was determined. The process as developed was then utilized to fabricate nine-ply LLVRs of five balanced constructions with two or three CR laminates used as various layers. The physico-mechanical properties of the LLVRs were evaluated, and the results showed that LLVRs had strong shear strength, sound dimensional stability, decent bending strength, and favorable toughening and buffering performances. The newly developed product is an interesting potential alternative to traditional laminated veneer lumber or plywood.

Durability of wood-plastic composite lumber

Science.gov (United States)

Rebecca E. Ibach

2010-01-01

Wood-plastic composite (WPC) lumber has been marketed as a low-maintenance, high-durability product. Retail sales in the United States were slightly less than $1 billion in 2008. Applications include docking, railing, windows, doors, fencing, siding, moldings, landscape timbers, car interior parts, and furniture. The majority of these products are used outdoors and...

Framing Lumber from Building Removal: How do We Best Utilize This Untapped Structural Resource?

Science.gov (United States)

Robert H. Falk; Steven Cramer; James Evans

2013-01-01

Compared with other construction materials, wood products are environmentally attractive because they sequester carbon, are renewable, and are low in embodied energy. Lumber salvaged from building removal possesses these same qualities but with additional environmental attributes. In spite of the environmental attractiveness of reclaimed lumber, its widespread...

Use of computer simulation in managing manufacturing systems: an ...

African Journals Online (AJOL)

Employing the maximum wane allowance allowed by WWPA grade rules, lumber production increased from the current 393.55 m3 to 416.54 m3. Also, with more wane, the recovery rate and lumber recovery factor increased by 5.9% and 5.7%, respectively. However, regardless of the increases, it was found that there was ...

Dimension yields from yellow-poplar lumber

Science.gov (United States)

R. C. Gilmore; J. D. Danielson

1984-01-01

The available supply of yellow poplar (Liriodendron tulipifera L.), its potential for new uses, and its continuing importance to the furniture industry have created a need to accumulate additional information about this species. As an aid to better utilization of this species, charts for determining cutting stock yields from yellow poplar lumber are presented for each...

The changing structure of the hardwood lumber industry with implications on technology adaptation

Science.gov (United States)

William Luppold; John Baumgras; John Baumgras

2000-01-01

The hardwood sawmilling industry has been changing over the last 50 years as a result of changes in hardwood sawtimber inventory and in the demand for hardwood lumber. In 1950 the industry was composed of numerous individual mills, few of which produced more than 3 million board feet of lumber annually. During this time the furniture industry was the major user of...

Machine Vision Systems for Processing Hardwood Lumber and Logs

Science.gov (United States)

Philip A. Araman; Daniel L. Schmoldt; Tai-Hoon Cho; Dongping Zhu; Richard W. Conners; D. Earl Kline

1992-01-01

Machine vision and automated processing systems are under development at Virginia Tech University with support and cooperation from the USDA Forest Service. Our goals are to help U.S. hardwood producers automate, reduce costs, increase product volume and value recovery, and market higher value, more accurately graded and described products. Any vision system is...

Low VOC drying of lumber and wood panel products. Progress report Number 9

Energy Technology Data Exchange (ETDEWEB)

Yan, H.; Banerjee, S. [Inst. of Paper Science and Technology, Atlanta, GA (United States); Conners, T.; Ingram, L.L.; Dalton, A.T.; Templeton, M.C.; Diehl, S.V. [Mississippi State Univ., MS (United States)

1999-01-01

Results from a multi-year study show that a significant part of the extensive variability observed in oriented strand board (OSB) flake dryer emissions can be traced to physiological effects, and the rest can be attributed to handling and other factors. Low-headspace treatment of lumber was scaled up to the 50 kg level. The amount of turpentine collected was of the same magnitude as that released upon drying lumber. For the process to be economical, the wood must first be brought to about 95 C with steam, and then processed with RF. Attempts to remove VOCs from OSB through low-headspace by placing a curtain over the wood failed because of leaks. A more rigid container will be required. RF-treatment does not alter the gas permeability of lumber.

The Research and Development of COM-PLY Lumber

Science.gov (United States)

Robert H. McAlister

1989-01-01

Between 1974 and 1986, a Southeastern Station Research Work Unit developed standards for composite studs, joists, and truss lumber and manufactured and demonstrated the materials. Economic feasibility was considered in every stage of research. Further development is left to industry.

Forest thinnings for integrated lumber and paper production

Science.gov (United States)

J.Y. Zhu; C.T. Scott; R. Gleisner; D. Mann; D.W. Vahey; D.P. Dykstra; G.H. Quinn; L.L. Edwards

2007-01-01

Integrated lumber and paper productions using forest thinning materials from U.S. national forests can significantly reduce the cost of prescriptive thinning operations. Many of the trees removed during forest thinnings are in small-diameter classes (diameter at breast height

Influence of Fiber Bundle Morphology on the Mechanical and Bonding Properties of Cotton Stalk and Mulberry Branch Reconstituted Square Lumber

Directory of Open Access Journals (Sweden)

Jing Zhang

2016-08-01

Full Text Available The mechanical properties of natural fiber composites can be strengthened in the longitudinal direction if the fiber is formed in a parallel manner. Reconstituted cotton stalk lumber and mulberry branch lumber were fabricated using hot-press technology, and the effects of fiber morphology on their mechanical and bonding properties were investigated. The fiber bundle size had a great influence on the mechanical and bonding properties of the final products. The maximum specific modulus of rupture (MOR and specific modulus of elasticity (MOE of the reconstituted lumber were obtained for medium-size fiber bundles, and the maximum MOR and MOE of reconstituted cotton stalk lumber was 130.3 MPa·g-1·cm-3 and 12.9 GPa·g-1·cm-3, respectively. The maximum MOR and MOE of the mulberry branch lumber was 147.2 MPa·g-1·cm-3 and 14.7 GPa·g-1·cm-3, respectively. Mechanical interlocking structures in the lumber were observed via fluorescence microscopy, showing that phenol-formaldehyde adhesive had penetrated into several cell layers of the fiber bundle under heating and pressure. The adhesive penetration capacity was stronger when the fiber bundles were smaller in size and density. The reconstituted lumber fabricated from both materials exhibited excellent mechanical performance in the parallel direction. Therefore, reconstituted cotton stalk and mulberry branch lumber are attractive potential materials for the construction industry.

75 FR 16748 - Final Voluntary Product Standard; DOC PS 20-10 “American Softwood Lumber Standard”

Science.gov (United States)

2010-04-02

...-0146-02] Final Voluntary Product Standard; DOC PS 20-10 ``American Softwood Lumber Standard'' AGENCY... of Standards and Technology (NIST) announces voluntary product standard DOC PS 20-10 ``American Softwood Lumber Standard'' which will supersede DOC PS 20-05. The Standard establishes standard sizes and...

Production of laminated veneer lumber LVL using veneer of Schizolobium amazonicum, Eucalyptus saligna and Pinus taeda

Directory of Open Access Journals (Sweden)

Setsuo Iwakiri

2010-12-01

Full Text Available This research evaluated the quality of laminated veneer lumber - LVL manufactured with veneers of Schizolobium amazonicum (paricá, Eucalyptus saligna and Pinus taeda. The LVL panels were manufactured in the laboratory conditions composed by seven veneers, 2,0 mm thickness, with different structural compositions, using phenol-formaldehyde resin. The veneers of Schizolobium amazonicum- paricá- were pre-classified by using stress wave machine. The veneers of Eucalyptus saligna and Pinus taeda were disposed in the face layer to reinforce the structural strength of LVL panels. The LVL quality was evaluated using glue line shear strength and static bending test (MOE and MOR, edge and flat. Grading of paricá veneers based on MOEd did not affected significantly the results of the glue line shear strength and MOE and MOR edge. For the MOE and MOR flat, the use of veneers of MOEd grade 1 contributed significantly to increasing the average values of these properties. In the same way, using the Eucalyptus saligna veneers on the face of LVL resulted in higher average values of MOE and MOR, edge and flat.

Consumer preferences and willingness to pay for character-marked cabinets from Alaska birch.

Science.gov (United States)

Geof Donovan; David. Nicholls

2003-01-01

Alaska birch lumber has a higher occurrence of defects (knots, bark pockets, flecks, spalting, etc.) when compared to competing hardwoods. These defects are a disadvantage when birch lumber is graded under standard National Hardwood Lumber Association (NHLA) grading rules. This paper examines whether defects and other character markings found in birch lumber may be an...

Evaluation of veneer yields and grades from yellow-poplar, white oak, and sweetgum from the southeast

Science.gov (United States)

Robert H. McAlister

1980-01-01

Dry volume yields and standard grades of veneer are given for yellow-poplar, sweetgum, and white oak by tree diameter and location within the stem. Results show that the typical stands of mixed southern pine and hardwood timer yield enough veneer to utilize almost 90 percent of the stand volume in the production of COM-PLY lumber and panels

Political pressure: An examination of U S Senators actions in restricting Canadian softwood lumber imports

Science.gov (United States)

Joseph Godwin; Daowei Zhang

2012-01-01

Over the past 30 years the U.S.–Canadian softwood lumber trade dispute has resulted in three managed trade agreements that have not been voted on in the U.S. Congress. Nevertheless, U.S. Senators have played an important role in shaping the political environment that has nurtured these agreements. In this paper we construct a lumber influence index based on 14 known...

Employment changes in U.S. hardwood lumber consuming industries during economic expansions and contractions since 1991

Science.gov (United States)

William G. Luppold; Matt Bumgardner

2016-01-01

Understanding employment trends is important for discerning the economic vitality of U.S. hardwood lumber users. After a period of growth in the 1990s, employment in industries consuming hardwood lumber has declined in the 21st century. The wood household furniture industry has experienced the greatest decline, with North Carolina, Virginia, and California being the...

Low VOC drying of lumber and wood panel products. Progress report Number 9 [January 1999

Energy Technology Data Exchange (ETDEWEB)

Yan, H.; Banerjee, S. [Inst. of Paper Science and Technology, Atlanta, GA (United States); Conners, T.; Ingram, L.L.; Dalton, A.T.; Templeton, M.C.; Diehl, S.V. [Mississippi State Univ., MS (United States)

1999-01-01

Results from a multi-year study show that a significant part of the extensive variability observed in oriented strand board (OSB) flake dryer emissions can be traced to physiological effects, and the rest can be attributed to handling and other factors. Low-headspace treatment of lumber was scaled up to the 50 kg level. The amount of turpentine collected was of the same magnitude as that released upon drying lumber. For the process to be economical, the wood must first be brought to about 95 C with steam, and then processed with RF. Attempts to remove VOCs from OSB through low-headspace by placing a curtain over the wood failed because of leaks. A more rigid container will be required. RF-treatment does not alter the gas permeability of lumber.

Combined heat and power system with advanced gasification technology for biomass wastes

Energy Technology Data Exchange (ETDEWEB)

Mochida, S.; Abe, T.; Yasuda, T. [Nippon Furnace Kogyo Kaisha Ltd, Yokohama (Japan); Gupta, A.K. [Maryland Univ., College Park, MD (United States). Dept. of Mechnical Engineering

2013-07-01

The results obtained from an advanced gasification system utilizing high temperature steam are presented here. The results showed successful demonstration of clean syngas production having high calorific value fuel ({proportional_to}10 MJ/m{sup 3}N) using woody biomass wastes in a downdraft type gasifier. The gasification capacity of the plant on dry basis was 60 kg/h. The syngas produced can be utilized in an absorption type chiller for air conditioning. This advanced gasification technology allows one to transform wastes to clean energy at local production sites without any environmental impact and expensive waste transportation costs. The experience gained from the demonstration plant allows one to implement to other industrial applications for use as a decentralized unit and obtain clean syngas for local use. The demonstration conducted here shows that the system is favorable for onsite use of compatible combined heat and power (CHP) system including light oil supported diesel engine power generator. The biomass waste fuel from a lumber mill factory was used in this study. The factory handles a wide forests area of about 50 ha and produces about 2,500 m{sup 3}/year of wood chips from thin out trees and waste lumbers. This translates to a maximum 110 kg/h of wood chips that can be fed to a gasifier. The syngas produced was used for the combined heat and power system. Local use of biomass for fuel reforming reduces the cost of collection and transportation costs so that a sustainable business is demonstrated with profit from the generated electricity and thermal energy. The cost structure incorporates both the depreciation cost and operation cost of the system. Thermal energy from hot water can be used for drying lumbers and wood chips in a cascade manner. The drying process can be adopted for enhancing its productivity with increased variability on the quality of lumber. The results show that the combined heat and power system (CHP) offers good profitable

Predictors of job tenure in a lumber-plywood mill

Science.gov (United States)

Charles H. Wolf

1973-01-01

Multiple discriminant analysis was used to identify biographic and employment history variables associated with job tenure in a lumber-plywood mill. Several variables-friends and relatives, type of housing, commuting distance, and prior work experience in the wood industry-were found to be significant.

Parametrication of numerical simulation of drying process in atypicall condenzation lumber kiln

Directory of Open Access Journals (Sweden)

Jiří Zejda

2004-01-01

Full Text Available This work deal with modelling of the process of drying, air flow, temperature and moisture distribution in a condensation lumber kiln. This model was made and solved in the computing system ANSYS with the use of the finite element method. There are comparationes of the 2D and 3D models, shape of wood stacks and variability of their parameters (height, width, length, cross section in the work. The flow velocity and orientation, pressure and temperature field were observed.

Production of lumber, lath, and shingles in 1917

Science.gov (United States)

Franklin H. Smith; Albert H. Pierson

1919-01-01

In this bulletin, which is one of an annual series covering the period 1904 to 1917, inclusive, with the exception of 1914, are detailed statistics of the 1917 production of lumber, lath, and shingles in the continental United States, with comparative figures from previous annual reports. The collection and compilation of the statistics for the Western States was done...

Comparing 2 Whiplash Grading Systems to Predict Clinical Outcomes.

Science.gov (United States)

Croft, Arthur C; Bagherian, Alireza; Mickelsen, Patrick K; Wagner, Stephen

2016-06-01

Two whiplash severity grading systems have been developed: Quebec Task Force on Whiplash-Associated Disorders (QTF-WAD) and the Croft grading system. The majority of clinical studies to date have used the modified grading system published by the QTF-WAD in 1995 and have demonstrated some ability to predict outcome. But most studies include only injuries of lower severity (grades 1 and 2), preventing a broader interpretation. The purpose of this study was assess the ability of these grading systems to predict clinical outcome within the context of a broader injury spectrum. This study evaluated both grading systems for their ability to predict the bivalent outcome, recovery, within a sample of 118 whiplash patients who were part of a previous case-control designed study. Of these, 36% (controls) had recovered, and 64% (cases) had not recovered. The discrete bivariate distribution between recovery status and whiplash grade was analyzed using the 2-tailed cross-tabulation statistics. Applying the criteria of the original 1993 Croft grading system, the subset comprised 1 grade 1 injury, 32 grade 2 injuries, 53 grade 3 injuries, and 32 grade 4 injuries. Applying the criteria of the modified (QTF-WAD) grading system, there were 1 grade 1 injury, 89 grade 2 injuries, and 28 grade 3 injuries. Both whiplash grading systems correlated negatively with recovery; that is, higher severity grades predicted a lower probability of recovery, and statistically significant correlations were observed in both, but the Croft grading system substantially outperformed the QTF-WAD system on this measure. The Croft grading system for whiplash injury severity showed a better predictive measure for recovery status from whiplash injuries as compared with the QTF-WAD grading system.

[The WHO/ISUP grading system for renal carcinoma].

Science.gov (United States)

Moch, H

2016-07-01

Histological tumor grading is an accepted prognostic parameter of renal cell carcinoma (RCC). In 2012, the International Society of Urologic Pathologists (ISUP) proposed a novel grading system for RCC, mainly based on the evaluation of nucleoli: grade 1 tumors have nucleoli that are inconspicuous and basophilic at ×400 magnification; grade 2 tumors have nucleoli that are clearly visible at ×400 magnification and eosinophilic; grade 3 tumors have clearly visible nucleoli at ×100 magnification; and grade 4 tumors have extreme pleomorphism or rhabdoid and/or sarcomatoid morphology. This grading system was validated for clear cell renal cell carcinoma and papillary renal cell carcinoma. At the same time, the ISUP proposed not grading chromophobe renal cell carcinomas according to this system. At a consensus conference in Zurich the World Health Organization (WHO) recommended the ISUP grading system; thus, the WHO/ISUP grading system is now going to be implemented internationally. The ISUP/WHO grading system has not been validated as a prognostic parameter for other tumor subtypes, but can be used for descriptive purposes.

[Reproducibility of Fuhrman nuclear grade: advantages of a two-grade system].

Science.gov (United States)

Letourneux, Hervé; Lindner, Véronique; Lang, Hervé; Massfelder, Thierry; Meyer, Nicolas; Saussine, Christian; Jacqmin, Didier

2006-06-01

The Fuhrman nuclear grade is the reference histoprognostic grading system routinely used all over the world for renal cell carcinoma. Studies measuring the inter-observer and intra-observer concordance of Fuhrman grade show poor results in terms of reproducibility and repeatability. These variations are due to a certain degree of subjectivity of the pathologist in application of the definition of tumour grade, particularly nuclear grade. Elements able to account for this subjectivity in renal cell carcinoma are identified from a review of the literature. To improve the reliability of nuclear grade, the territory occupied by the highest grade must be specified and the grades should probably be combined. At the present time, regrouping of grade 1 and 2 tumours as low grade and grade 3 and 4 tumours as high grade would achieve better reproducibility, while preserving the prognostic: value for overall survival. The development of new treatment modalities and their use in adjuvant situations will imply the use of reliable histoprognostic factors to specify, indications.

Lumber attributes, characteristics, and species preferences as indicated by secondary wood products firms in the continental United States.

Science.gov (United States)

David L. Nicholls; Joseph. Roos

2006-01-01

The purpose of this research was to evaluate selected lumber attributes, species preferences, and lumber use properties among secondary wood manufacturers in the United States. Our sample included producers of kitchen cabinets, furniture, doors, windows, and molded products who attended regional and national wood manufacturing events. More than 51% of respondents had...

Trends in domestic and international markets for ash logs and lumber

Science.gov (United States)

Dan. Meyer

2010-01-01

While ash is a "minor" commercial hardwood species relative to oak, poplar, and maple, it still accounts for roughly 3 percent of all hardwood lumber produced, with an estimated kiln-dried value exceeding $150 million annually.

Hardwood lumber supply chain: current status and market opportunities

Science.gov (United States)

Urs Buehlmann; Matthew Bumgardner; Al Schuler; Mark Barford

2007-01-01

The membership of the Appalachian Hardwood Manufacturers Association was surveyed in 2005 to determine the current status of large Appalachian sawmills. The primary focus was to assess the impacts of globalization on primary manufacturing, but attention was also paid to general issues affecting the hardwood lumber supply chain-from concerns over forest health and log...

Fractal Behavior Of Gleason And Srigley Grading Systems

Directory of Open Access Journals (Sweden)

M.S. Serbanescu

2016-06-01

In-class variation was 0.045 using the box-counting algorithm and 0.048 using the R-VA algorithm for Gleason grading system and 0.161 using the box-counting algorithm and 0.178 using the R-VA algorithm for Srigley grading system. Inter-class variation was, for Gleason grading system 13/28 using the box-counting algorithm and 20/28 using the R-VA algorithm while for the Srigley grading system was 3/6 using the box-counting algorithm and 5/6 using the R-VA algorithm respectively. Srigley grading system seems to perform better than Gleason’s on inter-class variation, but has lower performance on in-class variation. Nevertheless, we must note that there is a large difference between the two systems regarding the number of classes. The FD computed with the R-VA algorithm has better discrimination results than the one computed with the box-counting algorithm in both grading systems, thus proving once again the R-VA’s performance [3].

The pallet industry: a changing hardwood market

Science.gov (United States)

G.P. Dempsey; D.G. Martens

1991-01-01

From its inception during World War II, the wooden pallet industry has grown to become the Nation's largest industrial consumer of hardwood lumber products. Since most of the raw material in wooden pallets is lower grade lumber, the pallet industry's growth, efficiency, and changing raw material inputs must be of concern to the grade hardwood lumber industry...

Environmental impact of producing hardwood lumber using life-cycle inventory

Science.gov (United States)

Richard D. Bergman; S.A. Bowe

2007-01-01

Using sustainable building materials is gaining a significant presence in the United States therefore proving sustainability claims are becoming increasingly more important. Showing wood products as green building materials is vital for the long-term productivity of the wood building industry. This study examined hardwood lumber manufacturing using Life-Cycle Inventory...

Registration Patterns Under Two Different Grading Systems.

Science.gov (United States)

Remley, Audrey W.

In the early 1960's, Westminster College adopted a new grading system, with the traditional grade levels of A, B, C, D, and F converted to DN (Distinction), HP (High Pass), P (Pass), and NC (No Credit). NC replaced both D and F of the old system, and grade point averages were abolished, in an effort to encourage students to register in more…

Decline in the U.S. furniture industry: a case study of the impacts to the hardwood lumber supply chain

Science.gov (United States)

Shawn T. Grushecky; Urs Buehlmann; Al Schuler; William Luppold; Ed Cesa

2006-01-01

Traditionally, the wood household furniture industry has accounted for a sizeable portion of total hardwood lumber use in the United States. However, for more than a decade, imports have gained an increasing share of the hardwood furniture market, and lumber consumption by this industry has declined dramatically in the last 5 years. We used a case study methodology to...

40 CFR 60.3067 - How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber...

Science.gov (United States)

2010-07-01

... curtain incinerators that burn only wood waste, clean lumber, and yard waste? 60.3067 Section 60.3067... Incineration Units That Commenced Construction On or Before December 9, 2004 Model Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3067 How must I monitor opacity for...

Alternative Grading Systems. The Practitioner, Vol. III, No. 3.

Science.gov (United States)

De Leonibus, Nancy; Thomson, Scott

After examining some of the pros and cons of traditional grading, the demands colleges make on grading practices, and the responses of people interested in grading, a number of examples of operating alternative systems are given. The alternatives include a dual (pass/withdraw grading in some courses, traditional grading in others) system, a…

Impact of human error on lumber yield in rough mills

Science.gov (United States)

Urs Buehlmann; R. Edward Thomas; R. Edward Thomas

2002-01-01

Rough sawn, kiln-dried lumber contains characteristics such as knots and bark pockets that are considered by most people to be defects. When using boards to produce furniture components, these defects are removed to produce clear, defect-free parts. Currently, human operators identify and locate the unusable board areas containing defects. Errors in determining a...

Development of a Computer Vision Technology for the Forest Products Manufacturing Industry

Science.gov (United States)

D. Earl Kline; Richard Conners; Philip A. Araman

1992-01-01

The goal of this research is to create an automated processing/grading system for hardwood lumber that will be of use to the forest products industry. The objective of creating a full scale machine vision prototype for inspecting hardwood lumber will become a reality in calendar year 1992. Space for the full scale prototype has been created at the Brooks Forest...

Lumber recovery from small-diameter ponderosa pine from Flagstaff, Arizona

Science.gov (United States)

Eini C. Lowell; David W. Green

2001-01-01

Thousands of acres of densely stocked ponderosa pine forests surround Flagstaff, AZ. These stands are at high risk of fire, insect, and disease outbreak. Stand density management activity can be expensive, but product recovery from the thinned material could help defray removal costs. This project evaluated the yield and economic return of lumber recovered from small-...

40 CFR 60.3063 - When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard...

Science.gov (United States)

2010-07-01

... incinerator burns only wood waste, clean lumber, and yard waste? 60.3063 Section 60.3063 Protection of... Units That Commenced Construction On or Before December 9, 2004 Model Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3063 When must I comply if my air curtain...

Forecasting and recruitment in graded manpower systems

NARCIS (Netherlands)

van Nunen, J.A.E.E.; Wessels, J.

1977-01-01

In this paper a generalized Markov model is introduced to describe the dynamic behaviour of an individual employee in a graded Manpower system. Characteristics like the employee's grade, his educational level, his age and the time spent in his actual grade, can be incorporated in the Markov model.

Decision Criteria for German Hardwood Lumber Buyers: Market Needs and Purchase

Science.gov (United States)

Thomas G. Ponzurick; Robert J. Bush; Dieter Schaupp; Philip A. Araman

1993-01-01

The purpose of this study was to develop a better understanding of hardwood exports to the German market. A mail survey was conducted which resulted in a 47.8 percent rate of response. Of those German hardwood buyers responding to the survey, 71 percent purchased hardwood lumber directly from North America.

Effect of moisture content on strength of CCA-treated lumber

Science.gov (United States)

Jerrold E. Winandy

1995-01-01

Recent studies on the effects of chromated copper arsenate (CCA) treatment on lumber design properties have primarily evaluated the effects of such treatment at or near 12% moisture content and at failure times of 1 to 10 min. The influence of various moisture contents and faster loading rates is unknown. This report discusses the influence of moisture content and its...

Acoustic analysis of warp potential of green ponderosa pine lumber

Science.gov (United States)

Xiping Wang; William T. Simpson

2005-01-01

This study evaluated the potential of acoustic analysis as presorting criteria to identify warp-prone boards before kiln drying. Dimension lumber, 38 by 89 mm (nominal 2 by 4 in.) and 2.44 m (8 ft) long, sawn from open-grown small-diameter ponderosa pine trees, was acoustically tested lengthwise at green condition. Three acoustic properties (acoustic speed, rate of...

75 FR 61025 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order...

Science.gov (United States)

2010-10-01

... Information Order; Referendum Procedures AGENCY: Agricultural Marketing Service, USDA. ACTION: Proposed rule..., Washington, DC 20503. FOR FURTHER INFORMATION CONTACT: Maureen T. Pello, Marketing Specialist, Research and... procedure, Advertising, Consumer information, Marketing agreements, Softwood Lumber, Promotion, Reporting...

19 CFR 12.140 - Entry of softwood lumber products from Canada.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Entry of softwood lumber products from Canada. 12... products from Canada. The requirements set forth in this section are applicable for as long as the Softwood... and Canada, remains in effect. (a) Definitions. The following definitions apply for purposes of this...

40 CFR 60.3064 - What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber...

Science.gov (United States)

2010-07-01

... curtain incinerator that burns only wood waste, clean lumber, and yard waste and then restart it? 60.3064... Other Solid Waste Incineration Units That Commenced Construction On or Before December 9, 2004 Model Rule-Air Curtain Incinerators That Burn Only Wood Waste, Clean Lumber, and Yard Waste § 60.3064 What...

76 FR 22751 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order...

Science.gov (United States)

2011-04-22

... 23, 2011. FOR FURTHER INFORMATION CONTACT: Maureen T. Pello, Marketing Specialist, Research and... procedure, Advertising, Consumer information, Marketing agreements, Softwood lumber, Promotion, Reporting... Vol. 76 Friday, No. 78 April 22, 2011 Part II Department of Agriculture Agricultural Marketing...

Mechanical properties: wood lumber versus plastic lumber and thermoplastic composites

Directory of Open Access Journals (Sweden)

Bernardo Zandomenico Dias

Full Text Available Abstract Plastic lumber and thermoplastic composites are sold as alternatives to wood products. However, many technical standards and scientific studies state that the two materials cannot be considered to have the same structural behaviour and strength. Moreover, there are many compositions of thermoplastic-based products and plenty of wood species. How different are their mechanical properties? This study compares the modulus of elasticity and the flexural, compressive, tensile and shear strengths of such materials, as well as the materials' specific mechanical properties. It analyses the properties of wood from the coniferae and dicotyledon species and those of commercialized and experimental thermoplastic-based product formulations. The data were collected from books, scientific papers and manufacturers' websites and technical data sheets, and subsequently compiled and presented in Ashby plots and bar graphs. The high values of the compressive strength and specific compressive and tensile strengths perpendicular to the grain (width direction shown by the experimental thermoplastic composites compared to wood reveal their great potential for use in compressed elements and in functions where components are compressed or tensioned perpendicularly to the grain. However, the low specific flexural modulus and high density of thermoplastic materials limit their usage in certain civil engineering and building applications.

A revision of the Cormack and Lehane laryngoscopic grading system with special consideration to grade II laryngoscopic view

Directory of Open Access Journals (Sweden)

Hussain khan Z

2007-10-01

Full Text Available Background: The major responsibility of an anesthesiologist is to provide adequate respiration for the patient. The most vital element in providing functional respiration is the airway. No anesthetic is safe unless diligent efforts are devoted to maintaining an intact functional airway. Difficult intubation had been classified into four grades, according to the view obtainable at laryngoscopy by Cormack and Lehane in 1984. This grading system has been in use to evaluate and manage those patients with difficult airway by anesthesiologists. In clinical state, grades III and IV are quite rare, so the need for a modified Cormack and Lehane grading system was felt. The use of a modified Cormack-Lehane scoring system of laryngoscopic views during direct laryngoscopy, was previously examined in the Western population. Koh and his co-workers had examined this modified Cormack and Lehane grading system in Asian population in a study in Singapore General Hospital. The aim of this study was to investigate this scoring system in Iranian patients.Methods: In a cross sectional study, a modified version of the Cormack and Lehane grading system was evaluated in 300 patients requiring tracheal intubation. In the modified system, grade II (only part of the glottis is visible was divided into IIa (part of the cords is visible and IIb (only the arytenoids or the very posterior origin of the cords are visible. Difficult intubation was defined as requiring more than one laryngoscopy or the use of special equipments.Results: Sixty eight patients (22.7% were scored as grade IIa and 32 (7.7% as grade IIb. The prevalence of difficult intubation in grade IIb was significantly higher than patients in group IIa (47.8% vs. 2.9% respectively, Fisher's exact test, p= 0.001Conclusion: The modified grading system provides more information than the original Cormack and Lehane system."n 

The water footprint of wood for lumber, pulp, paper, fuel and firewood

NARCIS (Netherlands)

Schyns, Joseph Franciscus; Booij, Martijn J.; Hoekstra, Arjen Y.

This paper presents the first estimate of global water use in the forestry sector related to roundwood production for lumber, pulp, paper, fuel and firewood. For the period 1961-2010, we estimate forest evaporation at a high spatial resolution level and attribute total water consumption to various

A new MRI grading system for chondromalacia patellae.

Science.gov (United States)

Özgen, Ali; Taşdelen, Neslihan; Fırat, Zeynep

2017-04-01

Background Chondromalacia patellae is a very common disorder. Although magnetic resonance imaging (MRI) is widely used to investigate patellar cartilage lesions, there is no descriptive MRI-based grading system for chondromalacia patellae. Purpose To propose a new MRI grading system for chondromalacia patellae with corresponding high resolution images which might be useful in precisely reporting and comparing knee examinations in routine daily practice and used in predicting natural course and clinical outcome of the patellar cartilage lesions. Material and Methods High resolution fat-saturated proton density (FS PD) images in the axial plane with corresponding T2 mapping images were reviewed. A detailed MRI grading system covering the deficiencies of the existing gradings has been set and presented on these images. Two experienced observers blinded to clinical data examined 44 knee MR images and evaluated patellar cartilage changes according to the proposed grading system. Inter- and intra-rater validity testing using kappa statistics were calculated. Results A descriptive and detailed grading system with corresponding FS PD and T2 mapping images has been presented. Inter-rater agreement was 0.80 (95% confidence interval [CI], 0.71-0.89). Intra-rater agreements were 0.83 (95% CI, 0.74-0.91) for observer A and 0.79 (95% CI, 0.70-0.88) for observer B (k-values). Conclusion We present a new MRI grading system for chondromalacia patellae with corresponding images and good inter- and intra-rater agreement which might be useful in reporting and comparing knee MRI examinations in daily practice and may also have the potential for using more precisely predicting prognosis and clinical outcome of the patients.

Value loss from weevil-caused defects in eastern white pine lumber

Science.gov (United States)

Myron D. Ostrander; Carl H. Stoltenberg

1957-01-01

Owners of eastern white pine stands suffer financially in several ways from attacks by the white-pine weevil (Pissodes strobi). Crooks, forks, and other weevil-caused tree-bole deformities increase bucking, logging, and sawing costs, and they reduce recoverable volumes. The injuries also reduce the average value of the lumber recovered. It is only with this reduction...

TSUNAMI analysis of the applicability of proposed experiments to reactor-grade and weapons-grade mixed-oxide systems

International Nuclear Information System (INIS)

Rearden, Bradley T.; Hopper, Calvin M.; Elam, Karla R.

2005-01-01

The applicability of proposed critical experiments for the criticality code validation of a series of prototypic reactor-grade and weapons-grade mixed-oxide systems has been assessed with the TSUNAMI methodology from SCALE 5. The application systems were proposed by the Nuclear Energy Agency (NEA) Organization for Economic Cooperation and Development (OECD) Working Party on Nuclear Criticality Safety MOX Experimental Needs Working Group. Forty-eight application systems were conceived to envelope the range of conditions in processing and fabrication of reactor-grade and weapons-grade MOX fuel. The applicability of 303 existing critical benchmarks to each of the 48 applications was assessed, and validation coverage was found to be lacking for certain applications. Two series of proposed critical experiments were also considered in this analysis. The TSUNAMI analysis has revealed that both series of proposed experiments are applicable to numerous configurations of the reactor-grade and weapons-grade systems. A detailed assessment of which experiments were revealed by TSUNAMI to be most applicable to specific prototypic fuel processing systems has been performed. (author)

Reliability of injury grading systems for patients with blunt splenic trauma.

Science.gov (United States)

Olthof, D C; van der Vlies, C H; Scheerder, M J; de Haan, R J; Beenen, L F M; Goslings, J C; van Delden, O M

2014-01-01

The most widely used grading system for blunt splenic injury is the American Association for the Surgery of Trauma (AAST) organ injury scale. In 2007 a new grading system was developed. This 'Baltimore CT grading system' is superior to the AAST classification system in predicting the need for angiography and embolization or surgery. The objective of this study was to assess inter- and intraobserver reliability between radiologists in classifying splenic injury according to both grading systems. CT scans of 83 patients with blunt splenic injury admitted between 1998 and 2008 to an academic Level 1 trauma centre were retrospectively reviewed. Inter and intrarater reliability were expressed in Cohen's or weighted Kappa values. Overall weighted interobserver Kappa coefficients for the AAST and 'Baltimore CT grading system' were respectively substantial (kappa=0.80) and almost perfect (kappa=0.85). Average weighted intraobserver Kappa's values were in the 'almost perfect' range (AAST: kappa=0.91, 'Baltimore CT grading system': kappa=0.81). The present study shows that overall the inter- and intraobserver reliability for grading splenic injury according to the AAST grading system and 'Baltimore CT grading system' are equally high. Because of the integration of vascular injury, the 'Baltimore CT grading system' supports clinical decision making. We therefore recommend use of this system in the classification of splenic injury. Copyright © 2012 Elsevier Ltd. All rights reserved.

Development of an automatic visual grading system for grafting seedlings

Directory of Open Access Journals (Sweden)

Subo Tian

2017-01-01

Full Text Available In this study, a visual grading system of vegetable grafting machine was developed. The study described key technology of visual grading system of vegetable grafting machine. First, the contrasting experiment was conducted between acquired images under blue background light and natural light conditions, with the blue background light chosen as lighting source. The Visual C++ platform with open-source computer vision library (Open CV was used for the image processing. Subsequently, maximum frequency of total number of 0-valued pixels was predicted and used to extract the measurements of scion and rootstock stem diameters. Finally, the developed integrated visual grading system was experimented with 100 scions and rootstock seedlings. The results showed that success rate of grading reached up to 98%. This shows that selection and grading of scion and rootstock could be fully automated with this developed visual grading system. Hence, this technology would be greatly helpful for improving the grading accuracy and efficiency.

Stress wave techniques for determining quality of dimensional lumber from switch ties

Science.gov (United States)

K. C. Schad; D. E. Kretschmann; K. A. McDonald; R. J. Ross; D. W. Green

1995-01-01

Researchers at the Forest Products Laboratory, USDA Forest Service, have been studying nondestructive techniques for evaluating the strength of wood. This report describes the results of a pilot study on using these techniques to determine the quality of large dimensional lumber cut from switch ties. First, pulse echo and dynamic (transverse vibration) techniques were...

76 FR 22757 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order

Science.gov (United States)

2011-04-22

... concrete dominate larger residential and nonresidential projects. Brick, concrete, and vinyl are often used... products like cement and vinyl has also helped to reduce demand for softwood lumber. \\12\\ Price data was... votes would have to be confirmed in writing and recorded in Board minutes. The proposed Order would...

Reliability of injury grading systems for patients with blunt splenic trauma

NARCIS (Netherlands)

Olthof, D. C.; van der Vlies, C. H.; Scheerder, M. J.; de Haan, R. J.; Beenen, L. F. M.; Goslings, J. C.; van Delden, O. M.

2014-01-01

The most widely used grading system for blunt splenic injury is the American Association for the Surgery of Trauma (AAST) organ injury scale. In 2007 a new grading system was developed. This 'Baltimore CT grading system' is superior to the AAST classification system in predicting the need for

Character-marked furniture made from red alder harvested in southeast Alaska: product perspectives from consumers and retailers

Science.gov (United States)

Matthew Bumgardner; David Nicholls; Valerie Barber

2009-01-01

In recent decades. red alder (Alnus rubra Bong.) has become an important Pacific Northwest hardwood in appearance-grade lumber markets, such as exports, furniture, and cabinets. However, red alder generally is a short-lived pioneer species, and small logs can result in proportionally large volumes of lower grade lumber containing numerous visual...

Safety Review related to Commercial Grade Digital Equipment in Safety System

International Nuclear Information System (INIS)

Yu, Yeongjin; Park, Hyunshin; Yu, Yeongjin; Lee, Jaeheung

2013-01-01

The upgrades or replacement of I and C systems on safety system typically involve digital equipment developed in accordance with non-nuclear standards. However, the use of commercial grade digital equipment could include the vulnerability for software common-mode failure, electromagnetic interference and unanticipated problems. Although guidelines and standards for dedication methods of commercial grade digital equipment are provided, there are some difficulties to apply the methods to commercial grade digital equipment for safety system. This paper focuses on regulatory guidelines and relevant documents for commercial grade digital equipment and presents safety review experiences related to commercial grade digital equipment in safety system. This paper focuses on KINS regulatory guides and relevant documents for dedication of commercial grade digital equipment and presents safety review experiences related to commercial grade digital equipment in safety system. Dedication including critical characteristics is required to use the commercial grade digital equipment on safety system in accordance with KEPIC ENB 6370 and EPRI TR-106439. The dedication process should be controlled in a configuration management process. Appropriate methods, criteria and evaluation result should be provided to verify acceptability of the commercial digital equipment used for safety function

75 FR 61001 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order

Science.gov (United States)

2010-10-01

... lumber is used in products like flooring, siding and framing. The program would be financed by an... whether they favor implementation of the program prior to it going into effect. This rule also announces... Executive Order 12988, Civil Justice Reform. It is not intended to have retroactive effect. Section 524 of...

29 CFR (non - mandatory) Appendix A to Subpart L of Part 1926-Scaffold Specifications

Science.gov (United States)

2010-07-01

... Requirements published by the American National Standards Institute; or for 2×10 inch (nominal) or 2×9 inch... members (except planks) of the scaffold are a minimum of 1,500 lb-f/in2 (stress grade) construction grade lumber. All dimensions are nominal sizes as provided in the American Softwood Lumber Standards, dated...

Environmental impact of manufacturing softwood lumber in northeastern and north central United States

Science.gov (United States)

Richard D. Bergman; Scott A. Bowe

2010-01-01

Finding the environmental impact of building materials is becoming increasingly more important because of public environmental awareness. Accurate and precise life-cycle inventory data on wood products are needed to meet this demand. This study examined softwood lumber manufacturing in the northeastern and north central US using life-cycle inventory methods. Material...

Preliminary work in developing sawbolt grading systems for white oak

Science.gov (United States)

Everette D. Rast; Everette D. Rast

1971-01-01

This paper is principally a description of one technique used in the development of white oak (Quercus alba L.) sawbolt grades--not a final sawbolt grading system for the species over its range. This technique can be used by anyone in developing other bolt-grade specifications or in refining the system presented in this paper.

Evolution of standardized procedures for adjusting lumber properties for change in moisture content

Science.gov (United States)

David W. Green; James W. Evans

2001-01-01

This paper documents the development of procedures in American Society for Testing and Materials standards for adjusting the allowable properties of lumber for changes in moisture content. The paper discusses the historical context of efforts to establish allowable properties on a consensus basis, beginning in the 19th century. Where possible, the reasons for proposed...

Lens subluxation grading system: predictive value for ectopia lentis surgical outcomes

OpenAIRE

Mauro Waiswol; Niro Kasahara

2009-01-01

Objective: To present a classification system to grade ectopia lentis and to assess its usefulness as a predictor for surgical outcomes. Methods: Fifty-one eyes of 28 patients with either simple (19 patients) or Marfan syndrome-associated ectopia lentis (nine patients) with variable degrees of subluxation were operated on. Lens subluxation intensity was graded according to the lens subluxation grading system (LSGS) from grade 1 (lens on the whole pupillary area) up to grade 4 (lens absent fro...

Comparative evaluation of six cytological grading systems in breast carcinoma

Directory of Open Access Journals (Sweden)

Kaushik Saha

2013-01-01

Conclusions: Robinson′s grading system is simple, more objective and reproducible, and demonstrated the best concordance with histological grading. So, Robinson′s system should be used routinely for breast carcinoma aspirates.

Trends in the US hardwood lumber distribution industry: changing products, customers, and services

Science.gov (United States)

Urs Buehlmann; Omar Espinoza; Matthew Bumgardner; Bob. Smith

2010-01-01

Efficient and effective supply chains are the backbone of any industry, including the forest products industry. As the US secondary hardwood industry has undergone a profound transformation and large parts of the industry have moved offshore, the supply chain is adapting to these new realities. Remaining and new customers of US hardwood lumber distributors tend to be...

49 CFR 393.118 - What are the rules for securing dressed lumber or similar building products?

Science.gov (United States)

2010-10-01

... plywood, gypsum board or other materials of similar shape. Lumber or building products which are not... the middle tier that must be secured may not exceed 6 feet about the deck of the trailer; or (ii...

Foraminal syringomyelia: suggestion for a grading system.

Science.gov (United States)

Versari, P P; D'Aliberti, G; Talamonti, G; Collice, M

1993-01-01

The standard treatment of foraminal syringomyelia includes foramen magnum decompression and duraplasty. Improvement or stabilization of the disease are achieved in most of cases. However, at least one third of patients are reported to receive little or no benefit. In this paper we retrospectively reviewed a series of 40 consecutive foramen magnum decompressions in order to identify the possible pre-operative outcome predictors. Based on clinical evolution, neurological impairment and radiological features, a scale of severity was fixed and retrospectively tested. A pre-operative score was obtained for each patient and was correlated with the surgical results. Then a four level grading system was derived. All grade I and grade II patients achieved good results (improvement or stabilization), whereas grade III patients showed intermediate behaviour and grade IV invariably worsened. On this basis, surgical results of foramen magnum decompression might be further improved provided that a careful pre-operative selection is made.

Desenvolvimento e avaliação de um protótipo classificador de tábuas usando técnicas de visão artificial Development and evaluation of a prototype to classify lumber using artificial vision techniques

Directory of Open Access Journals (Sweden)

José Marcelo Gomes

2008-10-01

Full Text Available A classe de qualidade de uma peça de madeira serrada é determinada pelos defeitos apresentados e por algumas características associadas a eles, como: dimensões da peça e dos defeitos, posição dos defeitos, quantidade e tipo. Os objetivos deste trabalho foram desenvolver e avaliar um protótipo para classificação de tábuas de madeira de eucalipto, com base em imagens digitais, composto por uma esteira rolante onde são inseridas as tábuas para obtenção das imagens de suas faces. O protótipo pode utilizar tanto a norma da Associação Brasileira de Normas Técnicas (ABNT quanto a norma comercial de uma serraria. O processo pode ser acompanhado no microcomputador, que apresenta em seguida a imagem da tábua com o resultado final de sua classificação. A taxa de acerto no processo de classificação foi de 64,3%, usando-se a norma da ABNT, e de 81,0% com o emprego da norma comercial. A produtividade do protótipo desenvolvido foi de 7,9 m³ h-1, na classificação de madeira serrada de eucalipto.Lumber quality is determined by the defects presented and other characteristics such as: size, position, amount and type. The purpose of this research was to develop and evaluate a prototype to classify eucalyptus lumber using digital images. This prototype was built with a conveyor belt where the lumbers are inserted for image acquisition. Either the Brazilian standard (ABNT or the commercial rule can be used for classification. The process can be followed in a microcomputer that shows the lumber image with its final grade. The overall accuracy rate in the classification process was 64.3% using the ABNT norm, and 81.0% percent using the commercial norm. Productivity of the developed prototype was 7.9 m³ h-1.

A new grading system for analyzing pediatric cholesteatoma

International Nuclear Information System (INIS)

Kodama, Akira; Ashimori, Naoki; Tsurita, Minako; Ban, Akihiro

2007-01-01

We developed a new grading system to understand the complicated pathological changes of cholesteatoma in comparison to those of chronic otitis media. This grading system, based on the extent of the cholesteatoma and the surrounding pathlogical changes, is able to simply express the entire pathological condition of the ear with cholesteatoma. Using this grading system, we analyzed the ears of 48 children with cholesteatoma, who underwent tympanoplasty over the past ten years. Their ages ranged from 2 to 15 years with an average age of 8.5 years. The attic and mesotympanic cholesteatomas were associated with greater pathological changes than those observed in postero-superior quadrant cholesteatomas. The degree of the pathological change in the area surrounding the cholesteatoma appears to correlate with the degree of extention of the cholesteatoma. This system is thus considered to be useful for evaluating the improvement in the pathological conditions before and after surgery in patients with cholesteatoma. (author)

Property ($T$) for groups graded by root systems

CERN Document Server

Ershov, Mikhail; Kassabov, Martin

2017-01-01

The authors introduce and study the class of groups graded by root systems. They prove that if \\Phi is an irreducible classical root system of rank \\geq 2 and G is a group graded by \\Phi, then under certain natural conditions on the grading, the union of the root subgroups is a Kazhdan subset of G. As the main application of this theorem the authors prove that for any reduced irreducible classical root system \\Phi of rank \\geq 2 and a finitely generated commutative ring R with 1, the Steinberg group {\\mathrm St}_{\\Phi}(R) and the elementary Chevalley group \\mathbb E_{\\Phi}(R) have property (T). They also show that there exists a group with property (T) which maps onto all finite simple groups of Lie type and rank \\geq 2, thereby providing a "unified" proof of expansion in these groups.

Graded thermal insulation layer systems; Gradierte Waermedaemmschichtsysteme

Energy Technology Data Exchange (ETDEWEB)

Leushake, U.; Krell, T. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Koeln (Germany). Inst. fuer Werkstoff-Forschung

1996-12-31

Graded thermal insulation systems reduce local stresses between two layers. Grading usually involves a concentration variation in a second phase but may also involve variations of the microstructure or chemical composition. The contribution discusses the application of this technique for thermal protection of turbine blades in aircraft propulsion systems. [Deutsch] Mit Hilfe gradierter Waermeschichtsysteme ist es moeglich die lokalen Spannungen zwischen zwei Schichten zu verringern. Die Gradierung umfasst meistens eine Variation des Gehaltes einer zweiten Phase, kann aber auch die Variation der Mikrostruktur oder der chemischen Zusammensetzung beinhalten. In diesem Beitrag wird auf die Anwendung als thermischer Schutz von Turbinenschaufeln fuer Flugtriebwerke eingegangen.

Researchers propose single grade rule for evaluating hardwood pallet cants

Science.gov (United States)

Hal Mitchell; Marshall White; Philip Araman; Peter Hamner

2008-01-01

In "price taker" markets, successful businesses are the low cost producers, and pallet manufacturers are no exception. The single largest cost component of pallet manufacturing is raw material costs. Cants and lumber typically account for over 60% of operating costs. In the last three decades, cants have replaced lumber as the primary raw...

OPTIGRAMI V2 user's guide

Science.gov (United States)

Penny S. Lawson; R. Edward Thomas; Elizabeth S Walker

1996-01-01

OPTIGRAMI V2 is a computer program available for IBM persaonl computer with 80286 and higher processors. OPTIGRAMI V2 determines the least-cost lumber grade mix required to produce a given cutting order for clear parts from rough lumber of known grades in a crosscut-first rough mill operation. It is a user-friendly integrated application that includes optimization...

Agreement between the Facial Nerve Grading System 2.0 and the House-Brackmann Grading System in Patients with Bell Palsy.

Science.gov (United States)

Lee, Ho Yun; Park, Moon Suh; Byun, Jae Yong; Chung, Ji Hyun; Na, Se Young; Yeo, Seung Geun

2013-09-01

We have analyzed the correlation between the House-Brackmann (HB) scale and Facial Nerve Grading System 2.0 (FNGS 2.0) in patients with Bell palsy, and evaluated the usefulness of the new grading system. Sixty patients diagnosed with Bell palsy from May 2009 to December 2010 were evaluated using the HB scale and FNGS 2.0 scale during their initial visit, and after 3 and 6 weeks and 3 months. The overall intraclass correlation coefficient (ICC) was 0.908 (P=0.000) and the Spearman correlation coefficient (SCC) was 0.912 (P<0.05). ICC and SCC displayed differences over time, being 0.604 and 0.626, respectively, at first visit; 0.834 and 0.843, respectively, after 3 weeks; 0.844 and 0.848, respectively, after 6 weeks; and 0.808 and 0.793, respectively, after 3 months. There was a significant difference in full recovery, depending on the scale used (HB, P=0.000; FNGS 2.0, P<0.05). The exact agreements between regional assessment and FNGS 2.0 for the mouth, eyes, and brow were 72%, 63%, and 52%, respectively. FNGS 2.0 shows moderate agreement with HB grading. Regional assessment, rather than HB grading, yields stricter evaluation, resulting in better prognosis and determination of grade.

The 2014 International Society of Urological Pathology (ISUP) Consensus Conference on Gleason Grading of Prostatic Carcinoma: Definition of Grading Patterns and Proposal for a New Grading System.

Science.gov (United States)

Epstein, Jonathan I; Egevad, Lars; Amin, Mahul B; Delahunt, Brett; Srigley, John R; Humphrey, Peter A

2016-02-01

In November, 2014, 65 prostate cancer pathology experts, along with 17 clinicians including urologists, radiation oncologists, and medical oncologists from 19 different countries gathered in a consensus conference to update the grading of prostate cancer, last revised in 2005. The major conclusions were: (1) Cribriform glands should be assigned a Gleason pattern 4, regardless of morphology; (2) Glomeruloid glands should be assigned a Gleason pattern 4, regardless of morphology; (3) Grading of mucinous carcinoma of the prostate should be based on its underlying growth pattern rather than grading them all as pattern 4; and (4) Intraductal carcinoma of the prostate without invasive carcinoma should not be assigned a Gleason grade and a comment as to its invariable association with aggressive prostate cancer should be made. Regarding morphologies of Gleason patterns, there was clear consensus on: (1) Gleason pattern 4 includes cribriform, fused, and poorly formed glands; (2) The term hypernephromatoid cancer should not be used; (3) For a diagnosis of Gleason pattern 4, it needs to be seen at 10x lens magnification; (4) Occasional/seemingly poorly formed or fused glands between well-formed glands is insufficient for a diagnosis of pattern 4; (5) In cases with borderline morphology between Gleason pattern 3 and pattern 4 and crush artifacts, the lower grade should be favored; (6) Branched glands are allowed in Gleason pattern 3; (7) Small solid cylinders represent Gleason pattern 5; (8) Solid medium to large nests with rosette-like spaces should be considered to represent Gleason pattern 5; and (9) Presence of unequivocal comedonecrosis, even if focal is indicative of Gleason pattern 5. It was recognized by both pathologists and clinicians that despite the above changes, there were deficiencies with the Gleason system. The Gleason grading system ranges from 2 to 10, yet 6 is the lowest score currently assigned. When patients are told that they have a Gleason score 6 out

Moisture meter calibrations for untreated and ACQ-treated southern yellow pine lumber and plywood

Science.gov (United States)

C.R. Boardman; Samuel V. Glass; Charles G. Carll

2011-01-01

This study investigates the effects of alkaline copper quaternary (ACQ) preservative treatment and of plywood glue lines on resistance-based moisture content (MC) measurements. Moisture meter readings using stainless steel screws as electrodes were acquired over a range of moisture conditions in Southern Yellow Pine (SYP) lumber and plywood. Calibration equations are...

Lens subluxation grading system: predictive value for ectopia lentis surgical outcomes

Directory of Open Access Journals (Sweden)

Mauro Waiswol

2009-03-01

Full Text Available Objective: To present a classification system to grade ectopia lentis and to assess its usefulness as a predictor for surgical outcomes. Methods: Fifty-one eyes of 28 patients with either simple (19 patients or Marfan syndrome-associated ectopia lentis (nine patients with variable degrees of subluxation were operated on. Lens subluxation intensity was graded according to the lens subluxation grading system (LSGS from grade 1 (lens on the whole pupillary area up to grade 4 (lens absent from the pupillary area. Thirty eyes underwent cataract extraction (“dry” aspiration with endocapsular ring and in-the-bag intraocular lens (IOL implantation. Twenty-one eyes underwent cataract extraction (“dry” aspiration with scleral fixation of the IOL. The predictive value of the LSGS was assessed by analyzing the post-operative outcomes, including visual acuity (VA, endothelial cell loss, and complications for each grade on the grading system. Rresults: Patients were classified into grade 1 (19.6%, grade 2 (51% and grade 3 (29.4%. Post-operative VA was lower for eyes with larger degrees of subluxation. The higher the subluxation grade, the higher the endothelial cell loss, as well as, the frequency of vitreous loss and surgical time. Higher subluxation grades prevented optimal surgical outcomes with endocapsular ring and in-the-bag IOL implantation. Cconclusions: The LSGS provides an estimate of the surgical success of ectopia lentis. Adequate standardization of lens subluxation is crucial for understanding studies dealing with the surgical correction of this disorder.

The organizational implications of smokeless tobacco use in the lumber mill industry.

Science.gov (United States)

Donaldson, S I; Dent, C W; Sussman, S; Stoddard, J L; Severson, H H

1996-01-01

Although much is known about the characteristics of employees who smoke cigarettes, very little is known about workers who use smokeless tobacco. The current study was designed to understand the characteristics of smokeless tobacco users in relation to their performance at work and compare them with smokers and former tobacco users. Data were collected via interviews and questionnaires from a random sample of employees working at Pacific Lumber Company (N = 146), the largest single-site lumber mill in California. A total of 63 smokeless tobacco users (21 of whom also smoked cigarettes), 43 cigarette smokers, and 40 employees who had successfully quit using tobacco (34 of whom previously used cigarettes only) provided information about their health behavior, quality of work life, and performance at work. Analyses revealed that smokeless tobacco users reported less healthful sleep patterns, drank alcohol more often, were intoxicated more often, reported less job satisfaction and organizational commitment, and reported that both chewers and smokers do not work as hard and take more breaks than do tobacco-free employees (quitters). Specific differences among chewers-only, smokers-only, smokers-and-chewers, and quitters are presented. Results suggest the organizational value of developing worksite cessation programs for smokeless tobacco users.

Design of pedestrian truss bridge with Sengon-Rubber laminated veneer lumber

Science.gov (United States)

Herbudiman, B.; Pranata, Y. A.; Pangestu, L.

2017-12-01

Timber bridges are one of the bridge that has long been used, but nowadays, large dimension of sawn timber has limited supply and also it is not environmental-friendly. Laminated veneer lumber (LVL) is a engineered wood that becomes one of the promising alternative, because it is made from lower quality wood that processed to be used as a more quality one. The bridge planned to be a pedestrian truss bridge with length of 9 m, width of 3 m, height of 2.5 m, and using bolt and steel plate as its connection system. Mechanical properties of LVL obtained directly from laboratory test result. Bridge modeling and planning for wood construction refers to SNI 7973:2013, while the loading refers to SNI 1725:2016. Based on the modelling and calculation, the dimension of truss frame and girder beam which are 9 cm x 9 cm and 9 cm x 18 cm have adequate strengths and satisfy deflection requirement.

1998 data bank for kiln-dried red oak lumber

Science.gov (United States)

Charles J. Gatchell; R. Edward Thomas; Elizabeth S. Walker

1998-01-01

A collection of 3,487 fully described, kiln-dried red oak boards totaling 20,021 board feet. The boards, which are straight or contain no more than ? inch of crook, are FAS, FAS ONE FACE (F1F), Selects, No. 1 Common, No. 2A Common, or No. 3A common. The boards were graded with the UGRS (Ultimate Grading and Remanufacturing System) computer program. After the grade was...

Relationships between Loblolly Pine small clear specimens and Dimension Lumber Tested in Static Bending

Science.gov (United States)

Mark Alexander Butler; Joseph Dahlen; Finto Antony; Michael Kane; Thomas L. Eberhardt; Huizhe Jin; Kim Love-Myers; John Paul McTague

2016-01-01

Prior to the 1980s, the allowable stresses for lumber in North America were derived from testing of small clear specimens. However, the procedures were changed because these models were found to be inaccurate. Nevertheless, small clear testing continues to be used around the world for allowable stress determinations and in studies that examine forest management impacts...

Design of Control System for Kiwifruit Automatic Grading Machine

Directory of Open Access Journals (Sweden)

Xingjian Zuo

2013-05-01

Full Text Available The kiwifruit automatic grading machine is an important machine for postharvest processing of kiwifruit, and the control system ensures that the machine realizes intelligence. The control system for the kiwifruit automatic grading machine designed in this paper comprises a host computer and a slave microcontroller. The host computer provides a visual grading interface for the machine with a LabVIEW software, the slave microcontroller adopts an STC89C52 microcontroller as its core, and C language is used to write programs for controlling a position sensor module, push-pull type electromagnets, motor driving modules and a power supply for controlling the operation of the machine as well as the rise or descend of grading baffle plates. The ideal control effect is obtained through test, and the intelligent operation of the machine is realized.

The Changing Landscape of Grading Systems in US Higher Education

Science.gov (United States)

Kleinman, Steven B.; Leidman, Mary Beth; Longcore, Andrew J.

2018-01-01

The following study explores the landscape of grading systems utilised in higher education, focusing on the frequency of different types of assessment scales (including Straight Letter, Plus/Minus, and other alternative policies). Although numerous studies have explored the relationship between university grading system and student behaviour,…

A Contemporary Prostate Cancer Grading System: A Validated Alternative to the Gleason Score

Science.gov (United States)

Epstein, Jonathan I.; Zelefsky, Michael J.; Sjoberg, Daniel D.; Nelson, Joel B.; Egevad, Lars; Magi-Galluzzi, Cristina; Vickers, Andrew J.; Parwani, Anil V.; Reuter, Victor E.; Fine, Samson W.; Eastham, James A.; Wiklund, Peter; Han, Misop; Reddy, Chandana A.; Ciezki, Jay P.; Nyberg, Tommy; Klein, Eric A.

2016-01-01

Background Despite revisions in 2005 and 2014, the Gleason prostate cancer (PCa) grading system still has major deficiencies. Combining of Gleason scores into a three-tiered grouping (6, 7, 8–10) is used most frequently for prognostic and therapeutic purposes. The lowest score, assigned 6, may be misunderstood as a cancer in the middle of the grading scale, and 3 + 4 = 7 and 4 + 3 = 7 are often considered the same prognostic group. Objective To verify that a new grading system accurately produces a smaller number of grades with the most significant prognostic differences, using multi-institutional and multimodal therapy data. Design, setting, and participants Between 2005 and 2014, 20 845 consecutive men were treated by radical prostatectomy at five academic institutions; 5501 men were treated with radiotherapy at two academic institutions. Outcome measurements and statistical analysis Outcome was based on biochemical recurrence (BCR). The log-rank test assessed univariable differences in BCR by Gleason score. Separate univariable and multivariable Cox proportional hazards used four possible categorizations of Gleason scores. Results and limitations In the surgery cohort, we found large differences in recurrence rates between both Gleason 3 + 4 versus 4 + 3 and Gleason 8 versus 9. The hazard ratios relative to Gleason score 6 were 1.9, 5.1, 8.0, and 11.7 for Gleason scores 3 + 4, 4 + 3, 8, and 9–10, respectively. These differences were attenuated in the radiotherapy cohort as a whole due to increased adjuvant or neoadjuvant hormones for patients with high-grade disease but were clearly seen in patients undergoing radiotherapy only. A five–grade group system had the highest prognostic discrimination for all cohorts on both univariable and multivariable analysis. The major limitation was the unavoidable use of prostate-specific antigen BCR as an end point as opposed to cancer-related death. Conclusions The new PCa grading system has these benefits: more

How clustering dynamics influence lumber utilization patterns in the Amish-based furniture industry in Ohio

Science.gov (United States)

Matthew S. Bumgardner; Gary W. Graham; P. Charles Goebel; Robert L. Romig

2011-01-01

Preliminary studies have suggested that the Amish-based furniture and related products manufacturing cluster located in and around Holmes County, Ohio, uses sizeable quantities of hardwood lumber. The number of firms within the cluster has grown even as the broader domestic furniture manufacturing sector has contracted. The present study was undertaken in 2008 (spring/...

Visual MRI grading system to evaluate atrophy of the supeaspinatus muscle

Energy Technology Data Exchange (ETDEWEB)

Lim, Hyun Kyoung; Hong, Sung Hwan; Yoo, Hye Jin; Choi, Ja Young; Kim, Sae Hoon; Choi, Jung Ah; Kang, Heung Sik [Seoul National University College of Medicine, Seoul (Korea, Republic of)

2014-08-15

To investigate the interobserver reproducibility and diagnostic feasibility of a visual grading system for assessing atrophy of the supraspinatus muscle on magnetic resonance imaging (MRI). Three independent radiologists retrospectively evaluated the occupying ratio of the supraspinatus muscle in the supraspinatus fossa on 192 shoulder MRI examinations in 188 patients using a 3-point visual grading system (1, ≥ 60%; 2, 30-59%; 3, < 30%) on oblique sagittal T1-weighted images. The inter-reader agreement and the agreement with the reference standard (3-point grades according to absolute occupying ratio values quantitatively measured by directly contouring the muscles on MRI) were analyzed using weighted kappa. The visual grading was applied by a single reader to a group of 100 consecutive patients who had undergone rotator cuff repair to retrospectively determine the association between the visual grades at preoperative state and postsurgical occurrences of retear. The inter-reader weighted kappa value for the visual grading was 0.74 when averaged across three reader pairs (0.70-0.77 for individual reader pairs). The weighted kappa value between the visual grading and the reference standard ranged from 0.75 to 0.83. There was a significant difference in retear rates of the rotator cuff between the 3 visual grades of supraspinatus muscle atrophy on MRI in univariable analysis (p < 0.001), but not in multivariable analysis (p = 0.026). The 3-point visual grading system may be a feasible method to assess the severity of supraspinatus muscle atrophy on MRI and assist in the clinical management of patients with rotator cuff tear.

Visual MRI grading system to evaluate atrophy of the supeaspinatus muscle

International Nuclear Information System (INIS)

Lim, Hyun Kyoung; Hong, Sung Hwan; Yoo, Hye Jin; Choi, Ja Young; Kim, Sae Hoon; Choi, Jung Ah; Kang, Heung Sik

2014-01-01

To investigate the interobserver reproducibility and diagnostic feasibility of a visual grading system for assessing atrophy of the supraspinatus muscle on magnetic resonance imaging (MRI). Three independent radiologists retrospectively evaluated the occupying ratio of the supraspinatus muscle in the supraspinatus fossa on 192 shoulder MRI examinations in 188 patients using a 3-point visual grading system (1, ≥ 60%; 2, 30-59%; 3, < 30%) on oblique sagittal T1-weighted images. The inter-reader agreement and the agreement with the reference standard (3-point grades according to absolute occupying ratio values quantitatively measured by directly contouring the muscles on MRI) were analyzed using weighted kappa. The visual grading was applied by a single reader to a group of 100 consecutive patients who had undergone rotator cuff repair to retrospectively determine the association between the visual grades at preoperative state and postsurgical occurrences of retear. The inter-reader weighted kappa value for the visual grading was 0.74 when averaged across three reader pairs (0.70-0.77 for individual reader pairs). The weighted kappa value between the visual grading and the reference standard ranged from 0.75 to 0.83. There was a significant difference in retear rates of the rotator cuff between the 3 visual grades of supraspinatus muscle atrophy on MRI in univariable analysis (p < 0.001), but not in multivariable analysis (p = 0.026). The 3-point visual grading system may be a feasible method to assess the severity of supraspinatus muscle atrophy on MRI and assist in the clinical management of patients with rotator cuff tear.

CT grading systems as a predictor of successful nonoperative treatment of splenic trauma

International Nuclear Information System (INIS)

Umlas, S.L.; Cronan, J.J.

1990-01-01

PURPOSE: Selective nonoperative management of splenic trauma yields benefits with regard to preservation of the body's defense systems. This paper evaluates the capability of CT grading systems to predict successful non- operative management of splenic trauma in children and adults. Fifty-six patients with documented splenic injury were assessed with CT following standard trauma protocols. Each of these CT scans were graded according to the three recently proposed splenic trauma systems. The charts of these patients were then reviewed, and correlations between the CT grade and the clinical outcome were determined for each of these three grading systems

Relationships of nuclear, architectural and International Federation of Gynecology and Obstetrics grading systems in endometrial cancer.

Science.gov (United States)

Toptaş, Tayfun; Peştereli, Elif; Bozkurt, Selen; Erdoğan, Gülgün; Şimşek, Tayup

2018-03-01

To examine correlations among nuclear, architectural, and International Federation of Gynecology and Obstetrics (FIGO) grading systems, and their relationships with lymph node (LN) involvement in endometrioid endometrial cancer. Histopathology slides of 135 consecutive patients were reviewed with respect to tumor grade and LN metastasis. Notable nuclear atypia was defined as grade 3 nuclei. FIGO grade was established by raising the architectural grade (AG) by one grade when the tumor was composed of cells with nuclear grade (NG) 3. Correlations between the grading systems were analyzed using Spearman's rank correlation coefficients, and relationships of grading systems with LN involvement were assessed using logistic regression analysis. Correlation analysis revealed a significant and strongly positive relationship between FIGO and architectural grading systems (r=0.885, p=0.001); however, correlations of nuclear grading with the architectural (r=0.535, p=0.165) and FIGO grading systems (r=0.589, p=0.082) were moderate and statistically non-significant. Twenty-five (18.5%) patients had LN metastasis. LN involvement rates differed significantly between tumors with AG 1 and those with AG 2, and tumors with FIGO grade 1 and those with FIGO grade 2. In contrast, although the difference in LN involvement rates failed to reach statistical significance between tumors with NG 1 and those with NG 2, it was significant between NG 2 and NG 3 (p=0.042). Although all three grading systems were associated with LN involvement in univariate analyses, an independent relationship could not be established after adjustment for other confounders in multivariate analysis. Nuclear grading is significantly correlated with neither architectural nor FIGO grading systems. The differences in LN involvement rates in the nuclear grading system reach significance only in the setting of tumor cells with NG 3; however, none of the grading systems was an independent predictor of LN involvement.

Expression of monellin in a food-grade delivery system in Saccharomyces cerevisiae.

Science.gov (United States)

Liu, Jun; Yan, Da-zhong; Zhao, Sheng-jun

2015-10-01

Genetically modified (GM) foods have caused much controversy. Construction of a food-grade delivery system is a desirable technique with presumptive impact on industrial applications from the perspective of bio-safety. The aim of this study was to construct a food-grade delivery system for Saccharomyces cerevisiae and to study the expression of monellin from the berries of the West African forest plant Dioscoreophyllum cumminsii in this system. A food-grade system for S. cerevisiae was constructed based on ribosomal DNA (rDNA)-mediated homologous recombination to enable high-copy-number integration of the expression cassette inserted into the rDNA locus. A copper resistance gene (CUP1) was used as the selection marker for yeast transformation. Because variants of transformants containing different copy numbers at the CUP1 locus can be readily selected after growth in the presence of elevated copper levels, we suggest that this system would prove useful in the generation of tandemly iterated gene clusters. Using this food-grade system, a single-chain monellin gene was heterologously expressed. The yield of monellin reached a maximum of 675 mg L(-1) . This system harbors exclusively S. cerevisiae DNA with no antibiotic resistance genes, and it should therefore be appropriate for safe use in the food industry. Monellin was shown to be expressed in this food-grade delivery system. To our knowledge, this is the first report so far on expression of monellin in a food-grade expression system in S. cerevisiae. © 2014 Society of Chemical Industry.

A proposed angioarchitecture grading system related to embolization of brain arteriovenous malformations

International Nuclear Information System (INIS)

Fang Bing; Wang Yirong; Li Tielin; Duan Chuanzhi

2007-01-01

Objective: To analyze the risk of embolization of brain AVMs, study the angioarchitectural factors affecting the difference of embolization level, and to establish the angioarchitecture grading system for embolization of brain AVMs. Methods: The clinical data, angioarchitectural features, embolism complication and embolism level were retrospectively analyzed. Multivariate statistical analysis was performed to determine if any of the variables was predictive of a poor outcome of embolization (death or permanent neurological deficit), and if any of the variables was predictive of the percentage obliteration achieved by embolization. Based on the above results, we established the angioarchitecture grading system. Results: Endovascular procedures for embolization were performed 324 times in 189 patients during an 11-year period. Embolization was performed using N-butyl cyanoacrylate. In those patients, 3 (1.6%) died and 5(2.6%) had a permanent neurological deficit as a result of the embolization. The AVMs were given a score from 0 to 5 based on the size, number of the first grade feeding artery, and number of the second grade feeding artery. The assigned scores were as follows: nidus size (AVF=0, <30 mm=1, ≥30 mm=2), number of the first grade feeding artery (1=0, 2-3=1, ≥4=2)and number of the second grade feeding artery(≤3=0, ≥4=1). Angiographic results based on percentage obliteration were grouped into four categories: complete, 80%-99%, 50%-79%, and 0%-50%. In the AVMs with angioarchitecture scores 0-1, 24(77.4% )of 31 were fully embolised, with scores of 4-5, none of the 101 were fully embolised, 82(81.2%)were below 50% embolization percentage. The correlation between the angioarchitecture grading system and the embolization percentage was strong (κ= 0.736, P<0.05). Conclusions: The angioarchitecture grading system predicts the embolization percentage perfectly. The lower the scores, the higher the possibility of fully embolization is; the higher the scores

Post-Mission Quality Assurance Procedure for Survey-Grade Mobile Mapping Systems

Science.gov (United States)

Kerstinga, A. P.; Friess, P.

2016-06-01

Mobile Mapping Systems (MMS) consist of terrestrial-based moving platforms that integrate a set of imaging sensors (typically digital cameras and laser scanners) and a Position and Orientation System (POS), designed to collect data of the surrounding environment. MMS can be classified as "mapping-grade" or "survey-grade" depending on the system's attainable accuracy. Mapping-grade MMS produce geospatial data suitable for GIS applications (e.g., asset management) while survey-grade systems should satisfy high-accuracy applications such as engineering/design projects. The delivered accuracy of an MMS is dependent on several factors such as the accuracy of the system measurements and calibration parameters. It is critical, especially for survey-grade systems, to implement a robust Quality Assurance (QA) procedure to ensure the achievement of the expected accuracy. In this paper, a new post-mission QA procedure is presented. The presented method consists of a fully-automated self-calibration process that allows for the estimation of corrections to the system calibration parameters (e.g., boresight angles and lever-arm offsets relating the lidar sensor(s) to the IMU body frame) as well as corrections to the system measurements (e.g., post-processed trajectory position and orientation, scan angles and ranges). As for the system measurements, the major challenge for MMS is related to the trajectory determination in the presence of multipath signals and GNSS outages caused by buildings, underpasses and high vegetation. In the proposed self-calibration method, trajectory position errors are properly modelled while utilizing an efficient/meaningful trajectory segmentation technique. The validity of the proposed method is demonstrated using a dataset collected under unfavorable GNSS conditions.

A proposed grading system for standardizing tumor consistency of intracranial meningiomas.

Science.gov (United States)

Zada, Gabriel; Yashar, Parham; Robison, Aaron; Winer, Jesse; Khalessi, Alexander; Mack, William J; Giannotta, Steven L

2013-12-01

Tumor consistency plays an important and underrecognized role in the surgeon's ability to resect meningiomas, especially with evolving trends toward minimally invasive and keyhole surgical approaches. Aside from descriptors such as "hard" or "soft," no objective criteria exist for grading, studying, and conveying the consistency of meningiomas. The authors designed a practical 5-point scale for intraoperative grading of meningiomas based on the surgeon's ability to internally debulk the tumor and on the subsequent resistance to folding of the tumor capsule. Tumor consistency grades and features are as follows: 1) extremely soft tumor, internal debulking with suction only; 2) soft tumor, internal debulking mostly with suction, and remaining fibrous strands resected with easily folded capsule; 3) average consistency, tumor cannot be freely suctioned and requires mechanical debulking, and the capsule then folds with relative ease; 4) firm tumor, high degree of mechanical debulking required, and capsule remains difficult to fold; and 5) extremely firm, calcified tumor, approaches density of bone, and capsule does not fold. Additional grading categories included tumor heterogeneity (with minimum and maximum consistency scores) and a 3-point vascularity score. This grading system was prospectively assessed in 50 consecutive patients undergoing craniotomy for meningioma resection by 2 surgeons in an independent fashion. Grading scores were subjected to a linear weighted kappa analysis for interuser reliability. Fifty patients (100 scores) were included in the analysis. The mean maximal tumor diameter was 4.3 cm. The distribution of overall tumor consistency scores was as follows: Grade 1, 4%; Grade 2, 9%; Grade 3, 43%; Grade 4, 44%; and Grade 5, 0%. Regions of Grade 5 consistency were reported only focally in 14% of heterogeneous tumors. Tumors were designated as homogeneous in 68% and heterogeneous in 32% of grades. The kappa analysis score for overall tumor consistency

On the certification of forest concession: non-governmental organizations, enterprises, and the construction of a new institutional frame for the development of the lumber industry in the Brazilian Amazon

Directory of Open Access Journals (Sweden)

Marcelo Sampaio Carneiro

2011-12-01

Full Text Available The article discusses the construction process of forest certification in the Brazilian Amazon, emphasizing its importance for the new frame of lumber industry on that region. We sustain that one of the main results of the promotion of forest certification by the Forest Stewardship Council (FSC in Amazon was the constitution of an alliance between the environmentalist Non-Governmental Organizations, representative segments of forest business and members of the state bureaucracy for the promotion of lumber exploration based on forest management. In this perspective, the results produced by certification must be understood as part of a process of promotion of forest resources access policies, such as the approval of the Public Forests Management Law, and the creation of state entities destined to the promotion of lumber extraction on Amazon.

Performance of a rigid and a flexible adhesive in lumber joints subjected to moisture content changes

Science.gov (United States)

G. P. Krueger; R. F. Blomquist

1964-01-01

Experimental work was undertaken to investigate the extent and magnitude of deterioration that can occur in typical plywood-to-lumber glue joints subjected to stresses resulting from changes in the moisture content of the wood, and to compare the performance of a somewhat flexible or deformable adhesive to that of a rigid adhesive in these joints. Results showed that...

Prospective validation of a surgical complications grading system in a cohort of 2114 patients.

Science.gov (United States)

Mazeh, Haggi; Cohen, Oded; Mizrahi, Ido; Hamburger, Tamar; Stojadinovic, Alexander; Abu-Wasel, Bassam; Alaiyan, Bilal; Freund, Herbert R; Eid, Ahmed; Nissan, Aviram

2014-05-01

We recently reported a grading system for surgical complications. This system proved to have a high sensitivity for recording minor but meaningful complications prolonging hospital stay in patients after colorectal surgery. We aimed to prospectively validate the complication grading system in a general surgery department over 1 year. All surgical procedures and related complications were prospectively recorded between January 1st and December 31st, 2009. Surgical complications were graded on a severity scale of 1-5. The system classifies short-term outcome by grade emphasizing intensity of therapy required for treatment of the defined complication. During the study period, 2114 patients underwent surgery. Elective and oncological surgeries were performed in 1606 (76%) and 465 (22%) patients, respectively. There were 422 surgical complications in 304 (14%) patients (Grade 1/2: 203 [67%]; Grade 3/4: 90 [29%]; Grade 5: 11 [4%]). Median length of stay correlated significantly with complication severity: 2.3 d for no complication, 6.2 and 11.8 d for Grades 1/2 and 3/4, respectively (P 2 (OR 2.07, P Grade (OR 1.85, P = 0.001), oncological (OR 2.82, P 120 min (OR 2.08, P grading surgical complications permits standardized reporting of surgical morbidity according to the severity of impact. Prospective validation of this system supports its use in a general surgery setting as a tool for surgical outcome assessment and quality assurance. Copyright © 2014 Elsevier Inc. All rights reserved.

Quantitative assessment of graded burn wounds using a commercial and research grade laser speckle imaging (LSI) system

Science.gov (United States)

Ponticorvo, A.; Rowland, R.; Yang, B.; Lertsakdadet, B.; Crouzet, C.; Bernal, N.; Choi, B.; Durkin, A. J.

2017-02-01

Burn wounds are often characterized by injury depth, which then dictates wound management strategy. While most superficial burns and full thickness burns can be diagnosed through visual inspection, clinicians experience difficulty with accurate diagnosis of burns that fall between these extremes. Accurately diagnosing burn severity in a timely manner is critical for starting the appropriate treatment plan at the earliest time points to improve patient outcomes. To address this challenge, research groups have studied the use of commercial laser Doppler imaging (LDI) systems to provide objective characterization of burn-wound severity. Despite initial promising findings, LDI systems are not commonplace in part due to long acquisition times that can suffer from artifacts in moving patients. Commercial LDI systems are being phased out in favor of laser speckle imaging (LSI) systems that can provide similar information with faster acquisition speeds. To better understand the accuracy and usefulness of commercial LSI systems in burn-oriented research, we studied the performance of a commercial LSI system in three different sample systems and compared its results to a research-grade LSI system in the same environments. The first sample system involved laboratory measurements of intralipid (1%) flowing through a tissue simulating phantom, the second preclinical measurements in a controlled burn study in which wounds of graded severity were created on a Yorkshire pig, and the third clinical measurements involving a small sample of clinical patients. In addition to the commercial LSI system, a research grade LSI system that was designed and fabricated in our labs was used to quantitatively compare the performance of both systems and also to better understand the "Perfusion Unit" output of commercial systems.

Flexural properties of laminated veneer lumber manufactured from ultrasonically rated red maple veneer : a pilot study.

Science.gov (United States)

Xiping Wang; Robert J. Ross; Brian K. Brashaw; Steven A. Verhey; John W. Forsman; John R. Erickson

2003-01-01

The study described in this report was conducted to examine the flexural properties of laminated veneer lumber (LVL) manufactured from red maple veneer. Ultrasonically rated veneer, which was peeled from low value red maple saw-logs, was fabricated into 1/2-in.-(1.3-cm-) and 2-in.-(5-cm-) thick LVL billets. The flexural properties of the billets and of corresponding...

The Impact of Framing Effect on Student Preferences for University Grading Systems

Science.gov (United States)

Smith, Jeffrey K.; Smith, Lisa F.

2009-01-01

Kahneman and Tversky's (1979, 2000; Tversky & Kahneman, 1981) work in decision-making was applied to student preferences for grading practices. Undergraduate psychology students (n = 240) were randomly assigned to 1 of 3 framing conditions related to how a university course might be graded: a 100 point system, a percentage system, and an open…

Automated egg grading system using computer vision: Investigation on weight measure versus shape parameters

Science.gov (United States)

Nasir, Ahmad Fakhri Ab; Suhaila Sabarudin, Siti; Majeed, Anwar P. P. Abdul; Ghani, Ahmad Shahrizan Abdul

2018-04-01

Chicken egg is a source of food of high demand by humans. Human operators cannot work perfectly and continuously when conducting egg grading. Instead of an egg grading system using weight measure, an automatic system for egg grading using computer vision (using egg shape parameter) can be used to improve the productivity of egg grading. However, early hypothesis has indicated that more number of egg classes will change when using egg shape parameter compared with using weight measure. This paper presents the comparison of egg classification by the two above-mentioned methods. Firstly, 120 images of chicken eggs of various grades (A–D) produced in Malaysia are captured. Then, the egg images are processed using image pre-processing techniques, such as image cropping, smoothing and segmentation. Thereafter, eight egg shape features, including area, major axis length, minor axis length, volume, diameter and perimeter, are extracted. Lastly, feature selection (information gain ratio) and feature extraction (principal component analysis) are performed using k-nearest neighbour classifier in the classification process. Two methods, namely, supervised learning (using weight measure as graded by egg supplier) and unsupervised learning (using egg shape parameters as graded by ourselves), are conducted to execute the experiment. Clustering results reveal many changes in egg classes after performing shape-based grading. On average, the best recognition results using shape-based grading label is 94.16% while using weight-based label is 44.17%. As conclusion, automated egg grading system using computer vision is better by implementing shape-based features since it uses image meanwhile the weight parameter is more suitable by using weight grading system.

[GRADE system: classification of quality of evidence and strength of recommendation].

Science.gov (United States)

Aguayo-Albasini, José Luis; Flores-Pastor, Benito; Soria-Aledo, Víctor

2014-02-01

The acquisition and classification of scientific evidence, and subsequent formulation of recommendations constitute the basis for the development of clinical practice guidelines. There are several systems for the classification of evidence and strength of recommendations; the most commonly used nowadays is the Grading of Recommendations, Assessment, Development and Evaluation system (GRADE). The GRADE system initially classifies the evidence into high or low, coming from experimental or observational studies; subsequently and following a series of considerations, the evidence is classified into high, moderate, low or very low. The strength of recommendations is based not only on the quality of the evidence, but also on a series of factors such as the risk/benefit balance, values and preferences of the patients and professionals, and the use of resources or costs. Copyright © 2013 AEC. Published by Elsevier Espana. All rights reserved.

Technical Meeting on Grading of the Application of Management System Requirements. Presentations

International Nuclear Information System (INIS)

2012-01-01

The objectives of this Technical Meeting are threefold: - to share international experiences and lessons learned, as well as exchange views on best practices and strategies to overcome the difficulties encountered; - to review and discuss the draft technical report on 'Grading the Application of Management System Requirements, to allow the participants to contribute to the improvement of the document and to enrich it with practical examples; and - to strengthen the international networking of specialists in the field. The topics covered during the meeting will include: - Examples and case studies presented by participants from countries with nuclear facilities (mainly focused on NPPs, and, where appropriate, from research reactors, fuel cycle and waste management facilities) on grading the application of management system requirements and lessons learned. - Reviewing and improving the final draft of a technical report on 'Grading the Application of Management System Requirements', which will supersede the previous guidance: Grading of Quality Assurance Requirement: A Manual (Technical Reports Series No. 328)

Life Cycle Primary Energy and Carbon Analysis of Recovering Softwood Framing Lumber and Hardwood Flooring for Reuse

Science.gov (United States)

Richard D. Bergman; Hongmei Gu; Thomas R. Napier; James Salazar; Robert H. Falk

2012-01-01

Recovering wood for reuse in a new house affects energy and greenhouse gas emissions. This paper finds the energy and emissions for recovering softwood framing lumber and hardwood flooring from an old house for installation in a new house. Recovering wood displaces primary production of new wood products and avoids the end-of-life (EOL) burdens for the old house. We...

Domestic market opportunities for Alaska lumber-species preferences by secondary wood products manufacturers in the continental United States.

Science.gov (United States)

Joseph Roos; David L. Nicholls

2006-01-01

New equipment, technology, and marketing efforts have allowed Alaska’s wood products producers to consider opportunities previously unavailable to them. Until recently, the primary product produced by Alaska firms was rough, unseasoned lumber sold primarily within local markets. Given the purchase and installation of new drying and planing equipment, Alaska producers...

Radiative transfer equation for graded index medium in cylindrical and spherical coordinate systems

International Nuclear Information System (INIS)

Liu, L.H.; Zhang, L.; Tan, H.P.

2006-01-01

In graded index medium, the ray goes along a curved path determined by Fermat principle, and the curved ray-tracing is very difficult and complex. To avoid the complicated and time-consuming computation of curved ray trajectory, the methods not based on ray-tracing technique need to be developed for the solution of radiative transfer in graded index medium. For this purpose, in this paper the streaming operator along a curved ray trajectory in original radiative transfer equation for graded index medium is transformed and expressed in spatial and angular ordinates and the radiative transfer equation for graded index medium in cylindrical and spherical coordinate systems are derived. The conservative and the non-conservative forms of radiative transfer equation for three-dimensional graded index medium are given, which can be used as base equations to develop the numerical simulation methods, such as finite volume method, discrete ordinates method, and finite element method, for radiative transfer in graded index medium in cylindrical and spherical coordinate systems

Studies on classifying Indian coals. Part II. A new system for grading and pricing

Energy Technology Data Exchange (ETDEWEB)

Tumuluri, S.G.; Shrikhande, S.K.; Rao, S.K.; Haque, R.

1985-07-01

The new system is self-complete through grading to pricing. It grades non-coking coal by moisture and ash contents. Coking coal is graded by GKLT coke type and ash content. Volatile matter content is used as a supporting indexer, where necessary. Through the grade data, a coal is evaluated into a single numeral which depicts the coaly matter content and its nature or effectiveness. This value, called effective coaly matter, is converted to a relative rupee value or price index/price. Pragmatics and versatility of the system are discussed.

Performance of Color Camera Machine Vision in Automated Furniture Rough Mill Systems

Science.gov (United States)

D. Earl Kline; Agus Widoyoko; Janice K. Wiedenbeck; Philip A. Araman

1998-01-01

The objective of this study was to evaluate the performance of color camera machine vision for lumber processing in a furniture rough mill. The study used 134 red oak boards to compare the performance of automated gang-rip-first rough mill yield based on a prototype color camera lumber inspection system developed at Virginia Tech with both estimated optimum rough mill...

Student Attitudes Toward Grades and Grading Practices.

Science.gov (United States)

Stallings, William M.; Leslie, Elwood K.

The result of a study designed to assess student attitudes toward grading practices are discussed. Questionnaire responses of 3439 students in three institutions were tabulated. Responses were generally negative toward conventional grading systems. (MS)

Construction of a novel, stable, food-grade expression system by engineering the endogenous toxin-antitoxin system in Bacillus subtilis.

Science.gov (United States)

Yang, Sen; Kang, Zhen; Cao, Wenlong; Du, Guocheng; Chen, Jian

2016-02-10

Bacillus subtilis as an important workhorse that has been widely used to produce enzymes and metabolites. To broaden its applications, especially in the food and feed industry, we constructed a novel, stable, food-grade expression system by engineering its type II toxin-antitoxin system. The expression of the toxin EndoA, encoded by the chromosomal ydcE gene, was regulated by an endogenous, xylose-inducible promoter, while the ydcD gene, which encodes the unstable antitoxin EndoB, was inserted into a food-grade vector backbone, where its expression was driven by the native, constitutive promoter PylxM. By maintaining the xylose concentration above 2.0 g L(-1), this auto-regulated expression system was absolutely stable after 100 generations. Compared with traditional antibiotic-dependent expression systems, this novel expression system resulted in greater biomass and higher titers of desired products (enzymes or metabolites). Our results demonstrate that this stable, food-grade expression system is suitable for enzyme production and pathway engineering, especially for the production of food-grade enzymes and metabolites. Copyright © 2015 Elsevier B.V. All rights reserved.

A Red Oak Data Bank for Computer Simulations of Secondary Processing

Science.gov (United States)

Charles J. Gatchell; Janice K. Wiedenbeck; Elizabeth S. Walker

1993-01-01

An extensive data bank for red oak lumber that is compatible with most secondary manufacturing computer simulator tools is now available. Currently, the data bank contains 10,718 board feet in 1,578 boards. The National Hardwood Lumber Associations (NHLA) Special Kiln Dried Rule was used to grade the boards. The percentage of a boardâs surface measure contained in...

Defence in depth by 'Leittechnique' systems with graded intelligence

International Nuclear Information System (INIS)

Aleite, W.

1983-01-01

In the past, only two types of nuclear power plant instrumentation and control systems were in use in the Federal Republic of Germany (FRG): safety systems and operational systems. Present nuclear power plant 'Leittechnique' systems in the FRG have been expanded from this 'black-and-white' status to multiple-grade systems with respect to safety, qualification requirements and intelligence. The extensive experience of the past has encouraged the rule-making committees - representing all parties working in the nuclear field - to differentiate between the protection limitations and condition limitations of the reactor protection system on one hand and the information systems (including the accident monitoring and alarm system) of different safety importance on the other, assuming additional extensive application of non-safety-grade operational Leittechnique systems. These definitions of categories are in accordance with international practice and enable designers to apply 'echelons of defence', composed of equipment of all categories, in accordance with 'defence-in-depth' concepts. They also simplify the introduction of computerized equipment, especially in the lower safety categories. Status, background and reasons of the introduction, as well as typical defence-in-depth modes, of the first running Leittechnique system of this kind (in the Grafenrheinfeld nuclear power plant) and especially their different tasks in disturbance handling are described. The international situation and future developments are briefly characterized. (author)

A New Grading System for the Management of Antenatal Hydronephrosis.

Science.gov (United States)

Dos Santos, Joana; Parekh, Rulan S; Piscione, Tino D; Hassouna, Tarek; Figueroa, Victor; Gonima, Paula; Vargas, Isis; Farhat, Walid; Rosenblum, Norman D

2015-10-07

Standard clinical assessments do not predict surgical intervention in patients with a moderate degree of upper tract hydronephrosis. This study investigated whether combined measures of renal calyceal dilation and anteroposterior diameter (APD) of the renal pelvis at the first postnatal ultrasound better predict surgical intervention beyond standard assessments of the APD or Society of Fetal Urology (SFU) grading system. A retrospective cohort of 348 children with antenatal hydronephrosis followed from 2003 to 2013 were studied. Using Cox regression, the risk for surgery by APD, SFU, and combined grading on the basis of the first postnatal ultrasound was calculated. The predictive capability of each grading system for surgery was determined by calculating the positive likelihood ratio (LR+). The combination of APD≥6-9 mm and diffuse caliectasis had a hazard ratio (HR) of 19.5 (95% confidence interval [95% CI], 3.94 to 96.9) versus 0.59 (95% CI, 0.05 to 6.53) for APD≥6-9 mm alone and a similar risk of 8.9 for SFU grade 3 (95% CI, 3.84 to 20.9). The combination of APD≥9-15 mm and diffuse caliectasis had an HR of 18.7 (95% CI, 4.36 to 80.4) versus 1.75 (95% CI, 0.29 to 10.5) for APD≥9-15 mm alone. The LR+ for surgery for diffuse caliectasis and APD≥6-9 mm was higher than for APD≥6-9 mm alone (HR=2.62; 95% CI, 0.87 to 7.94 versus HR=0.04; 95% CI, 0.01 to 0.32) and was higher for APD≥9-15 mm and diffuse caliectasis than APD≥9-15 mm alone (HR=2.0; 95% CI, 1.15 to 3.45 versus HR=0.14; 95% CI, 0.04 to 0.43). Both combined groups of moderate hydronephrosis (APD≥6-9 mm or ≥9-15 mm with diffuse caliectasis) had only slightly higher LR+ than SFU grade 3 (HR=1.89; 95% CI, 1.17 to 3.05). These results suggest a grading system combining APD and diffuse caliectasis distinguishes those children with moderate degrees of upper tract hydronephrosis that are at higher risk of surgery. Copyright © 2015 by the American Society of Nephrology.

[Prostate cancer. Part 2: Review of the various tumor grading systems over the years 1966-2015 and future perspectives of the new grading of the International Society of Urological Pathology (ISUP)].

Science.gov (United States)

Helpap, B; Bubendorf, L; Kristiansen, G

2016-02-01

The continued development of methods in needle biopsies and radical prostatectomy for treatment of prostate cancer has given special emphasis to the question of the prognostic relevance of the various systems of grading. The classical purely histological grading system of Gleason has been modified several times in the past decades and cleared the way for a new grading system by the prognostic grading of Epstein. Assessment of the old and also modified combined histological and cytological grading of Mostofi, the World health Organization (WHO) and the urologic-pathological working group of prostate cancer in connection with the Gleason grading (combined Gleason-Helpap grading), has led to considerably improved rates of concordance between biopsy and radical prostatectomy and to improved estimations of prognosis beside its contribution to the development of a more practicable grading system for clinical use.

Computer aided analysis of prostate histopathology images to support a refined Gleason grading system

Science.gov (United States)

Ren, Jian; Sadimin, Evita; Foran, David J.; Qi, Xin

2017-02-01

The Gleason grading system used to render prostate cancer diagnosis has recently been updated to allow more accurate grade stratification and higher prognostic discrimination when compared to the traditional grading system. In spite of progress made in trying to standardize the grading process, there still remains approximately a 30% grading discrepancy between the score rendered by general pathologists and those provided by experts while reviewing needle biopsies for Gleason pattern 3 and 4, which accounts for more than 70% of daily prostate tis- sue slides at most institutions. We propose a new computational imaging method for Gleason pattern 3 and 4 classification, which better matches the newly established prostate cancer grading system. The computer- aided analysis method includes two phases. First, the boundary of each glandular region is automatically segmented using a deep convolutional neural network. Second, color, shape and texture features are extracted from superpixels corresponding to the outer and inner glandular regions and are subsequently forwarded to a random forest classifier to give a gradient score between 3 and 4 for each delineated glandular region. The F1 score for glandular segmentation is 0.8460 and the classification accuracy is 0.83+/-0.03.

Grading system for migrated lumbar disc herniation on sagittal magnetic resonance imaging. An agreement study

Energy Technology Data Exchange (ETDEWEB)

Ahn, Y.; Jeong, T.S. [Gachon University Gil Medical Center, Department of Neurosurgery, Incheon (Korea, Republic of); Lim, T.; Jeon, J.Y. [Gachon University Gil Medical Center, Department of Radiology, Incheon (Korea, Republic of)

2018-01-15

Migrated lumbar disc herniations (LDHs) in the sagittal plane are common. Disc migration grading can be applied as a useful measurement tool in the diagnosis, treatment, and outcome evaluation of migrated LDH. No study has evaluated the reliability of migrated LDH grading. We evaluated the reliability and functionality of the current magnetic resonance imaging (MRI) grading system for migrated LDH. We assessed a six-level grading system developed based on sagittal MRI and graded according to the direction (rostral and caudal) and degree (low, high, and very high) of disc migration. One-hundred and one migrated LDHs treated with minimally invasive endoscopic discectomy were analyzed independently by two experienced radiologists. Intraobserver and interobserver agreements were assessed by kappa statistics. The most common migrated LDH grade was grade 4 (30.94%; caudal, low-grade migration). Rostral and caudal migrations were more common in the upper and lower lumbar levels, respectively. Interobserver agreement in the grading of migrated LDH was good at both the first (kappa = 0.737) and second assessment (kappa = 0.657). The intraobserver agreement for reader 1 was very good (kappa = 0.827) and for reader 2 was good (kappa = 0.620). The current grading system for migrated LDH was found to be reliable and functional with good interobserver and intraobserver agreement. It may be useful in the interpretation of disc migration patterns and outcomes of various minimally invasive surgical procedures. (orig.)

A practical MRI grading system for osteoarthritis of the knee: Association with Kellgren–Lawrence radiographic scores

Energy Technology Data Exchange (ETDEWEB)

Park, Hee-Jin, E-mail: parkhiji@gmail.com [Department of Radiology, Sungkyunkwan University School of Medicine, Kangbuk Samsung Hospital, #108 Pyung-dong, Jongno-gu, Seoul 110-746 (Korea, Republic of); Department of Radiology, Kangwon National University School of Medicine, Baengnyeong-ro 156, Chuncheon-Si, Gangwon-Do Kangwon National University Hospital 200-722 (Korea, Republic of); Kim, Sam Soo, E-mail: samskim@kangwon.ac.kr [Department of Radiology, Kangwon National University School of Medicine, Baengnyeong-ro 156, Chuncheon-Si, Gangwon-Do Kangwon National University Hospital 200-722 (Korea, Republic of); Lee, So-Yeon, E-mail: parkhiji@kwandong.ac.kr [Department of Radiology, Sungkyunkwan University School of Medicine, Kangbuk Samsung Hospital, #108 Pyung-dong, Jongno-gu, Seoul 110-746 (Korea, Republic of); Park, Noh-Hyuck, E-mail: nhpark904@kwandong.ac.kr [Department of Radiology, Myongji Hospital, Kwandong University, College of Medicine, 697-24 Hwajung-dong, Dukyang-ku, Koyang, Kyunggi 412-270 (Korea, Republic of); Park, Ji-Yeon, E-mail: zzzz3@hanmail.net [Department of Radiology, Myongji Hospital, Kwandong University, College of Medicine, 697-24 Hwajung-dong, Dukyang-ku, Koyang, Kyunggi 412-270 (Korea, Republic of); Choi, Yoon-Jung, E-mail: yoonchoi99@gmail.com [Department of Radiology, Sungkyunkwan University School of Medicine, Kangbuk Samsung Hospital, #108 Pyung-dong, Jongno-gu, Seoul 110-746 (Korea, Republic of); Jeon, Hyun-Jun, E-mail: ostrich-13@hanmail.net [Department of Occupational Medicine, Dongsan Medical Center, Keimyung University School of Medicine, 194 Dongsan-Dong, Jung-ku, Taegu (Korea, Republic of)

2013-01-15

Purpose: To propose a reproducible and constant MR grading system for osteoarthritis of the knee joint that provides high interobserver and intraoberver agreement and that does not require complicated calculation procedures. Materials and methods: This retrospective study sample included 44 men and 65 women who underwent both MRI and plain radiography of the knee at our institution. All patients were older than 50 years of age (mean 57.7) and had clinically suspected osteoarthritis of the knee. The standard of 4 grades on the MR grade scale was based mainly on cartilage injury and additional findings. Kellgren–Lawrence grades were assessed for the same patient group. The relationship between the results was determined. Statistical analyses were performed including kappa statistics, categorical regression analysis and nonparametric correlation analysis. Results: The interobserver and intraoberver agreements between the two readers in the grading of osteoarthritis were found to be almost perfect. Interobserver and intraobserver agreements were slightly lower for the MR grading system than for the Kellgren–Lawrence grading scale. The correlation between the MR grade and Kellgren–Lawrence grade was very high and did not differ with patient age. The MR grades were highly correlated with the Kellgren–Lawrence grades and showed excellent interobserver and intraobserver agreements. Conclusion: This new MR grading system for osteoarthritis of the knee joint is reproducible and may be helpful for the grading of osteoarthritis of the knee without requiring reference to plain radiography.

A practical MRI grading system for osteoarthritis of the knee: Association with Kellgren–Lawrence radiographic scores

International Nuclear Information System (INIS)

Park, Hee-Jin; Kim, Sam Soo; Lee, So-Yeon; Park, Noh-Hyuck; Park, Ji-Yeon; Choi, Yoon-Jung; Jeon, Hyun-Jun

2013-01-01

Purpose: To propose a reproducible and constant MR grading system for osteoarthritis of the knee joint that provides high interobserver and intraoberver agreement and that does not require complicated calculation procedures. Materials and methods: This retrospective study sample included 44 men and 65 women who underwent both MRI and plain radiography of the knee at our institution. All patients were older than 50 years of age (mean 57.7) and had clinically suspected osteoarthritis of the knee. The standard of 4 grades on the MR grade scale was based mainly on cartilage injury and additional findings. Kellgren–Lawrence grades were assessed for the same patient group. The relationship between the results was determined. Statistical analyses were performed including kappa statistics, categorical regression analysis and nonparametric correlation analysis. Results: The interobserver and intraoberver agreements between the two readers in the grading of osteoarthritis were found to be almost perfect. Interobserver and intraobserver agreements were slightly lower for the MR grading system than for the Kellgren–Lawrence grading scale. The correlation between the MR grade and Kellgren–Lawrence grade was very high and did not differ with patient age. The MR grades were highly correlated with the Kellgren–Lawrence grades and showed excellent interobserver and intraobserver agreements. Conclusion: This new MR grading system for osteoarthritis of the knee joint is reproducible and may be helpful for the grading of osteoarthritis of the knee without requiring reference to plain radiography

Comparison of two kiln-drying schedules for turkish hazel ( Corylus colurna ) lumber of 5-cm thickness

OpenAIRE

Korkut, Süleyman; As, Nusret; Büyüksari, Ümit

2018-01-01

Abstract: Turkish hazel (Corylus colurna) lumber with a nominal thickness of 5 cm from the Kastamonu region, Turkey, was dried through conventional kiln drying using two different programs, a non-protective drying schedule and a protective drying schedule. The goal of the study was to obtain a kiln schedule that would maintain wood quality and also save drying time until a final moisture content of 8 ± 2% was reached. The intensity of warping (twisting, bowing, cupping, crooking), superficial...

Relationship of the Van Herick Grading System with Peripheral Iris Configuration and Level of Iris Insertion.

Science.gov (United States)

Khan, Faisal Aziz; Niazi, Shafaq Pervez Khan; Khan, Assad Zaman

2017-09-01

To determine the relationship of the van Herick angle grading system with the level of iris insertion and peripheral iris configuration. Observational study. Eye department, Combined Military Hospital, Malir Cantt., Karachi, from May to October 2015. Sixty-five eyes of 65 patients were recruited. Anterior chamber depth at the temporal limbus was measured as a fraction of corneal section thickness using van Herick technique and graded on the standard 4-point scale of the van Herick grading system. Gonioscopy of the temporal quadrant was performed with a Posner 4 mirror goniolens and both the true level of iris insertion and peripheral iris configuration were recorded on a 4-point scale so as to equate with the van Herick 4-point grading system. Spearman's rho test was applied to determine the relationship of the van Herick grading system with level of iris root insertion and peripheral iris configuration. Amoderate positive correlation between van Herick grade and peripheral iris configuration was found which was statistically significant (rs=0.42, p < 0.001). Astatistically significant and moderate positive correlation was also detected between van Herick grade and the level of iris insertion (rs=0.45, p < 0.001). The van Herick grade has a moderately positive relationship with the peripheral iris configuration and true level of iris insertion.

Revisions of the Learning Mastery Systems for the Harper and Row Grades One and Two and the Macmillan Bank Street Grade One Reading Series.

Science.gov (United States)

Maeder, Jacqueline; And Others

The revisions on the Learning Mastery Systems (LMSs) for the Harper & Row grade-one and grade-two and the Macmillan Bank Street grade-one reading programs are outlined in this document. A rationale for the revisions is presented. An LMS is a set of materials and procedures prepared by the southwest Regional Laboratory (SWRL) as an…

Use of a Graded Approach in the Application of the Management System Requirements for Facilities and Activities

International Nuclear Information System (INIS)

2014-06-01

IAEA Safety Standards Series No. GS-R-3, The Management System for Facilities and Activities, defines the requirements for establishing, implementing, assessing and continually improving a management system that integrates safety, health, environmental, security, quality and economical elements. It details the need to grade the application of the management system requirements to ensure that resources are deployed and appropriate controls are applied on the basis of the consideration of: the significance and complexity of each product or activity; the hazards and the magnitude of the potential impact (risks) associated with the safety, health, environmental, security, quality and economical elements of each product or activity; and the possible consequences if a product fails or an activity is carried out incorrectly. The grading of the application of the requirements detailed in IAEA Safety Standards Series No. GS-R-3 is especially essential when they are implemented in smaller facilities and activities. The grading is done to ensure that the management system for smaller facilities and activities are suitably tailored to the hazards and the magnitude of the potential impact of the facilities and activities. Detailed guidance on how the grading requirements of IAEA Safety Standards Series No. GS-R-3 can be met and how to ensure that grading is performed in a consistent manner can be found in IAEA Safety Standards Series No. GS-G-3.1, Application of the Management System for Facilities and Activities. In addition, it contains guidance on systematic grading methods which will reduce the likelihood and consequences of improper grading. This publication provides an overview of grading fundamentals, the grading process, the role of classification in the process and the typical controls that can be graded. It also provides practical guidance and examples of grading as required by IAEA Safety Standards Series No. GS-R-3 to develop and apply a method of grading

Usage of Commercial Grade Programmable Digital Systems in Safety Related Applications

International Nuclear Information System (INIS)

Mandic, D.

2006-01-01

This paper explains methods and conditions, which if completely and correctly fulfilled, enable an operating NPP (Nuclear Power Plant) licensed and operating in accordance with the US codes and US regulatory requirements to use a commercial grade programmable digital device (PLC - Programmable Digital Controller, digital controller, digital computer or process computer) in a safety related application in a NPP. In mid 80's, when an intensive construction cycle of the new NPPs in the U.S.A. was completed, many equipment manufacturers either disappeared from the market or they abandoned their product lines that were designed and manufactured under 10 CFR Part 50 Appendix B quality assurance program. The quality assurance as defined by 10 CFR Part 50 Appendix B comprises all those planned and systematic actions necessary to provide adequate confidence that a Structure, System or Component (SSC) will perform satisfactorily in service . The operating NPPs faced the problem related to the availability of qualified equipment, components and spare parts. The US NRC (Nuclear Regulatory Commission) recognized that problem timely (Oct. 1978 revision of 10CFR21) and required a commercial grade item to be dedicated before it could be used as a basic component. A special process named Dedication of CGI - Commercial Grade Items if conducted properly, provides reasonable assurance that a commercial grade item to be used as a basic component will perform its intended safety related function and, in this respect, is deemed equivalent to an item designed and manufactured under 10 CFR Part 50 Appendix B. After that, the Dedication of CGI has been widely used mostly for relatively simple mechanical, electrical, and IandC components and spare parts. In order to provide guidance to the dedication process, EPRI has issued two documents (EPRI NP-5652 and Supplemental Guidance for EPRI NP-5652). All nuclear power plants, which comply with the US nuclear regulatory requirements, hindered as

ALBI versus Child-Pugh grading systems for liver function in patients with hepatocellular carcinoma.

Science.gov (United States)

Na, Seong K; Yim, Sun Y; Suh, Sang J; Jung, Young K; Kim, Ji H; Seo, Yeon S; Yim, Hyung J; Yeon, Jong E; Byun, Kwan S; Um, Soon H

2018-04-01

The prognostic performance of the albumin-bilirubin (ALBI) grade in hepatocellular carcinoma (HCC) as an objective method of assessing liver function was investigated. Data from 2099 patients with HCC in Korea were collected and analyzed retrospectively. The discriminative performance of ALBI grade was compared with Child-Pugh (C-P) grade for different stages or treatments. The median follow up duration was 16.2 months (range: 1.0-124.9). The median survival times were 49.7 months for C-P grade A (65.8%), 12.4 months for C-P grade B (25.5%), and 4.2 months for C-P grade C (8.6%) (P < 0.001). The median survival times were 84.2 months for ALBI grade 1 (32.8%), 25.5 months for ALBI grade 2 (53.5%), and 7.7 months for ALBI grade 3 (13.7%) (P < 0.001). In early UICC stages, ALBI grade showed better discriminative performance than C-P grade. In curative treatments, ALBI grade also showed better discriminative performance than C-P grade (Harrell's C: 0.624 (C-P grade) vs 0.667 [ALBI grade]). ALBI grade provided better prognostic performance in survival analysis and better distribution of the grades than C-P grade in HCC, suggesting that ALBI grade could be a good alternative grading system for liver function in patients with HCC. © 2018 Wiley Periodicals, Inc.

The effect of curve sawing two-sided cants from small diameter hardwood sawlogs on lumber and pallet part yields

Science.gov (United States)

Peter Hamner; Marshall S. White; Philip A. Araman

2006-01-01

Curve sawing is a primary log breakdown process that incorporates gang-saw technology to allow two-sided cants from logs with sweep to be cut parallel to the log surface or log axis. Since curve-sawn logs with sweep are cut along the grain, the potential for producing high quality straight-grain lumber and cants increases, and strength, stiffness, and dimensional...

Statistical Outlier Detection for Jury Based Grading Systems

DEFF Research Database (Denmark)

Thompson, Mary Kathryn; Clemmensen, Line Katrine Harder; Rosas, Harvey

2013-01-01

This paper presents an algorithm that was developed to identify statistical outliers from the scores of grading jury members in a large project-based first year design course. The background and requirements for the outlier detection system are presented. The outlier detection algorithm...... and the follow-up procedures for score validation and appeals are described in detail. Finally, the impact of various elements of the outlier detection algorithm, their interactions, and the sensitivity of their numerical values are investigated. It is shown that the difference in the mean score produced...... by a grading jury before and after a suspected outlier is removed from the mean is the single most effective criterion for identifying potential outliers but that all of the criteria included in the algorithm have an effect on the outlier detection process....

The Necessity of a Graded Tariff System between Crude Oil and Oil Products

Energy Technology Data Exchange (ETDEWEB)

Kang, B.R. [SK Corporation, Seoul (Korea)

2002-06-01

Even though the graded tariff system between crude oil and oil products has been continuously insisted by oil refining companies since the export and import liberalization of 1997, and its necessity has been admitted by the government, press, and academia, the expanded implementation of the graded tariff system has not been yet realized. Some people says that the graded tariff system between crude oil and oil products is a kind of desperate plans, which oil refining companies suggests to stop the importing companies' rapid growth, so it will eventually restrict the competition of the domestic oil market due to the withering of importing companies. However, the graded tariff system between crude oil and oil products should have been enforced in 1997 as a complementary measure of the import liberalization like other industries or the advanced countries' cases. It is the basic tariff principle that the low tariff is levied on raw materials and the high tariff on final products in order to protect domestic industry. The remaining things are just to form the sympathy and to agree socially for the reorganization of tariff structure in the reasonable way. It is not desirable to make a fool mistake such as a proverb; t is too late to shut the stable door after the horse has bolted. owing to the unreasonable tariff system.

Evaluation of Urinary Tract Dilation Classification System for Grading Postnatal Hydronephrosis.

Science.gov (United States)

Hodhod, Amr; Capolicchio, John-Paul; Jednak, Roman; El-Sherif, Eid; El-Doray, Abd El-Alim; El-Sherbiny, Mohamed

2016-03-01

We assessed the reliability and validity of the Urinary Tract Dilation classification system as a new grading system for postnatal hydronephrosis. We retrospectively reviewed charts of patients who presented with hydronephrosis from 2008 to 2013. We included patients diagnosed prenatally and those with hydronephrosis discovered incidentally during the first year of life. We excluded cases involving urinary tract infection, neurogenic bladder and chromosomal anomalies, those associated with extraurinary congenital malformations and those with followup of less than 24 months without resolution. Hydronephrosis was graded postnatally using the Society for Fetal Urology system, and then the management protocol was chosen. All units were regraded using the Urinary Tract Dilation classification system and compared to the Society for Fetal Urology system to assess reliability. Univariate and multivariate analyses were performed to assess the validity of the Urinary Tract Dilation classification system in predicting hydronephrosis resolution and surgical intervention. A total of 490 patients (730 renal units) were eligible to participate. The Urinary Tract Dilation classification system was reliable in the assessment of hydronephrosis (parallel forms 0.92). Hydronephrosis resolved in 357 units (49%), and 86 units (12%) were managed by surgical intervention. The remainder of renal units demonstrated stable or improved hydronephrosis. Multivariate analysis revealed that the likelihood of surgical intervention was predicted independently by Urinary Tract Dilation classification system risk group, while Society for Fetal Urology grades were predictive of likelihood of resolution. The Urinary Tract Dilation classification system is reliable for evaluation of postnatal hydronephrosis and is valid in predicting surgical intervention. Copyright © 2016 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

The pathologist's mean grade is constant and individualizes the prognostic value of bladder cancer grading.

Science.gov (United States)

van Rhijn, Bas W G; van Leenders, Geert J L H; Ooms, Bert C M; Kirkels, Wim J; Zlotta, Alexandre R; Boevé, Egbert R; Jöbsis, Adriaan C; van der Kwast, Theo H

2010-06-01

A new grading system for bladder cancer (BCa) was adopted in 2004 to reduce observer variability and provide better prognostic information. We compared the World Health Organization (WHO) 1973 and 2004 systems for observer variability and prognosis. Slides of 173 primary non-muscle-invasive BCa were reviewed two times by four pathologists. Intra- and interobserver variability were assessed using κ statistics. We determined the mean grade (eg, G1/low malignant potential is 1 grade point, G2/low grade is 2 grade points) of the pathologists per grading cycle. Kaplan-Meier analyses were applied for prediction of recurrence and progression. For WHO 2004 and 1973 grading, the agreement between the pathologists was 39-74% (κ: 0.14-0.58) and 39-64% (κ: 0.15-0.41), respectively. The intraobserver agreement varied from 71% to 88% (κ: 0.55-0.81). The mean grade of a pathologist was constant (difference below 0.1 grade point) irrespective of the grading system. Conversely, mean-grade differences among the pathologists were high, up to 0.7 grade point. The mean grades for the WHO 2004 system were 0.3-0.5 grade point higher than those of WHO 1973. Mean grade distinguished low and high graders among the pathologists and was strongly linked with risk of progression in each grade category. The variation in mean grade among individual pathologists exceeded the grade shift caused by WHO 2004 grading. Knowledge of the pathologist's mean grade allows a better assessment of the prognostic value of grading. Mean grade has the potential to become a tool for quality assurance in pathology. Copyright © 2009 European Association of Urology. Published by Elsevier B.V. All rights reserved.

THERMAL DEGRADATION AND MORPHOLOGICAL ASPECTS OF FOUR WOOD SPECIES USED IN LUMBER INDUSTRY

Directory of Open Access Journals (Sweden)

Matheus Poletto

Full Text Available ABSTRACT The aim of this work was characterize four wood waste samples from lumber industry in order to obtain previous information about structure and properties of wood before use it as a biofuel or as reinforcement in composite formulations. The influence of wood components on the thermal degradation stability of different wood species has been investigated using thermogravimetry, differential scanning calorimetry and scanning electron microscopy. Four wood species, Eucalyptus grandis (EUG, Pinus elliottii (PIE, Dipteryx odorata (DIP and Mezilaurus itauba (ITA, were used in this study. The results showed that higher extractives contents may form a thin film on the wood fiber surface which can accelerate the degradation process and reduce the wood thermal stability

POST-MISSION QUALITY ASSURANCE PROCEDURE FOR SURVEY-GRADE MOBILE MAPPING SYSTEMS

Directory of Open Access Journals (Sweden)

A. P. Kerstinga

2016-06-01

Full Text Available Mobile Mapping Systems (MMS consist of terrestrial-based moving platforms that integrate a set of imaging sensors (typically digital cameras and laser scanners and a Position and Orientation System (POS, designed to collect data of the surrounding environment. MMS can be classified as “mapping-grade” or “survey-grade” depending on the system’s attainable accuracy. Mapping-grade MMS produce geospatial data suitable for GIS applications (e.g., asset management while survey-grade systems should satisfy high-accuracy applications such as engineering/design projects. The delivered accuracy of an MMS is dependent on several factors such as the accuracy of the system measurements and calibration parameters. It is critical, especially for survey-grade systems, to implement a robust Quality Assurance (QA procedure to ensure the achievement of the expected accuracy. In this paper, a new post-mission QA procedure is presented. The presented method consists of a fully-automated self-calibration process that allows for the estimation of corrections to the system calibration parameters (e.g., boresight angles and lever-arm offsets relating the lidar sensor(s to the IMU body frame as well as corrections to the system measurements (e.g., post-processed trajectory position and orientation, scan angles and ranges. As for the system measurements, the major challenge for MMS is related to the trajectory determination in the presence of multipath signals and GNSS outages caused by buildings, underpasses and high vegetation. In the proposed self-calibration method, trajectory position errors are properly modelled while utilizing an efficient/meaningful trajectory segmentation technique. The validity of the proposed method is demonstrated using a dataset collected under unfavorable GNSS conditions.

An endoscopic mucosal grading system is predictive of leak in stapled rectal anastomoses.

Science.gov (United States)

Sujatha-Bhaskar, Sarath; Jafari, Mehraneh D; Hanna, Mark; Koh, Christina Y; Inaba, Colette S; Mills, Steven D; Carmichael, Joseph C; Nguyen, Ninh T; Stamos, Michael J; Pigazzi, Alessio

2018-04-01

Anastomotic leak is a devastating postoperative complication following rectal anastomoses associated with significant clinical and oncological implications. As a result, there is a need for novel intraoperative methods that will help predict anastomotic leak. From 2011 to 2014, patient undergoing rectal anastomoses by colorectal surgeons at our institution underwent prospective application of intraoperative flexible endoscopy with mucosal grading. Retrospective review of patient medical records was performed. After creation of the colorectal anastomosis, application of a three-tier endoscopic mucosal grading system occurred. Grade 1 was defined as circumferentially normal appearing peri-anastomotic mucosa. Grade 2 was defined as ischemia or congestion involving 30% of the colon or rectal mucosa or ischemia/congestion involving both sides of the staple line. From 2011 to 2014, a total of 106 patients were reviewed. Grade 1 anastomoses were created in 92 (86.7%) patients and Grade 2 anastomoses were created in 10 (9.4%) patients. All 4 (3.8%) Grade 3 patients underwent immediate intraoperative anastomosis takedown and re-creation, with subsequent re-classification as Grade 1. Demographic and comorbidity data were similar between Grade 1 and Grade 2 patients. Anastomotic leak rate for the entire cohort was 12.2%. Grade 1 patients demonstrated a leak rate of 9.4% (9/96) and Grade 2 patients demonstrated a leak rate of 40% (4/10). Multivariate logistic regression associated Grade 2 classification with an increased risk of anastomotic leak (OR 4.09, 95% CI 1.21-13.63, P = 0.023). Endoscopic mucosal grading is a feasible intraoperative technique that has a role following creation of a rectal anastomosis. Identification of a Grade 2 or Grade 3 anastomosis should provoke strong consideration for immediate intraoperative revision.

Performance study on a low-temperature absorption–compression cascade refrigeration system driven by low-grade heat

International Nuclear Information System (INIS)

Xu, Yingjie; Chen, Guangming; Wang, Qin; Han, Xiaohong; Jiang, Ning; Deng, Shiming

2016-01-01

Highlights: • An absorption–compression system for low-temperature is developed and analyzed. • Cooling capacity, compression power, and discharge temperature are all improved. • At −170 °C, giving 200 W low-grade cooling capacity, COP increases by 28.6%. • Simulation results are verified experimentally, showing good agreement. - Abstract: This paper presents a performance study on a low-temperature absorption–compression cascade refrigeration system (LACRS), which consists of an absorption subsystem (AS) and a vapor compression auto-cascade subsystem (CS). In the system, low-grade heat of AS is used to subcool the CS, which can obtain cold energy at −170 °C. A simulation study is carried out to investigate the effects of evaporating temperature and low-grade cooling capacity on system performance. The study results show that as low-grade cooling capacity from the AS is provided to the CS, high-grade cooling capacity increases, compressor power consumption decreases, and the COP of the CS therefore increases. Comparing with compression auto-cascade cycle, the largest COP improvement of LACRS is about 38%. The model is verified by experimental data. An additional high-grade cooling capacity is obtained experimentally at −170 °C. The study results presented in this paper not only demonstrate the excellent performance of the LACRS, but also provide important guidance to further system design, and practical application.

Leadership Strategies in Implementation of High-School Standards-Based Grading Systems

Science.gov (United States)

Pritzl, Jerome

2016-01-01

This multi-site case study examined leadership strategies used during successful implementation of standards-based grading systems in three Wisconsin high schools. It found that leaders' reported commitment, patience, and persistence showed evidence of sustainable, high-functioning systems. It drew two main conclusions: first, school leaders need…

Thick-target Pixe analysis of chromium, copper and arsenic impregnated lumber

International Nuclear Information System (INIS)

Saarela, K-E.; Harju, L.; Lill, J-O.; Rajander, J.; Lindroos, A.; Heselius, S-J.

1999-01-01

Chromium, copper and arsenic (CCA) have for decades been used for wood preservation. Of these elements especially arsenic is very toxic. As CCA impregnated wood is still today used for many construction purposes, a monitoring of these metal ions is of great environmental importance. Thick-target PIXE is a powerful method for the determination of trace metals in wood. The TTPIXE method enabled study of variations of the elemental concentrations in lumber treated with CCA impregnation solution. Distribution patterns were obtained for both naturally occurring elements and elements introduced in the treatment process. During the impregnation process a desorption of e.g. alkali metal ions takes place from the wood. The sensitivity of the method is improved by dry ashing of the samples prior to PIXE analysis. The TTPIXE method was calibrated and validated using international certified reference materials (CRM) based on wood material

Linking log quality with product performance

Science.gov (United States)

D. W. Green; Robert Ross

1997-01-01

In the United States, log grading procedures use visual assessment of defects, in relation to the log scaling diameter, to estimate the yield of lumber that maybe expected from the log. This procedure was satisfactory when structural grades were based only on defect size and location. In recent years, however, structural products have increasingly been graded using a...

Modifying the Medical Research Council grading system through Rasch analyses

NARCIS (Netherlands)

Vanhoutte, Els Karla; Faber, Catharina Gerritdina; van Nes, Sonja Ingrid; Jacobs, Bart Casper; van Doorn, Pieter Antoon; van Koningsveld, Rinske; Cornblath, David Reid; van der Kooi, Anneke Jelly; Cats, Elisabeth Aviva; van den Berg, Leonard Hendrik; Notermans, Nicolette Claudia; van der Pol, Willem Lodewijk; Hermans, Mieke Catharina Elisabeth; van der Beek, Nadine Anna Maria Elisabeth; Gorson, Kenneth Craig; Eurelings, Marijke; Engelsman, Jeroen; Boot, Hendrik; Meijer, Ronaldus Jacobus; Lauria, Giuseppe; Tennant, Alan; Merkies, Ingemar Sergio José; Barreira, A. A.; Bennett, D.; van den Bergh, P. Y. K.; Bril, V.; Devigili, G.; Hadden, R. D.; Hahn, A. F.; Hartung, H.-P.; Hughes, R. A. C.; Illa, I.; Katzberg, H.; Léger, J.-M.; Lewis, R. A.; Lunn, M. P. T.; Nascimento, O. J. M.; Nobile-Orazio, E.; Padua, L.; Pouget, J.; Reilly, M. M.; van Schaik, I.; Smith, B.; de Visser, M.; Walk, D.

2012-01-01

The Medical Research Council grading system has served through decades for the evaluation of muscle strength and has been recognized as a cardinal feature of daily neurological, rehabilitation and general medicine examination of patients, despite being respectfully criticized due to the unequal

Modifying the Medical Research Council grading system through Rasch analyses

NARCIS (Netherlands)

E.K. Vanhoutte (Els); C.G. Faber (Carin); S.I. van Nes (Sonja); B.C. Jacobs (Bart); P.A. van Doorn (Pieter); R. van Koningsveld (Rinske); D.R. Cornblath (David); A.J. Kooj (Anneke); E.A. Cats (Elisabeth); L.H. van den Berg (Leonard); N.C. Notermans (Nicolette); W.L. van der Pol (Ludo); M.C.E. Hermans; N.A.M.E. van der Beek (Nadine); K.C. Gorson (Kenneth); M. Eurelings (Marijke); L. Engelsman (Lyda); H. Boot (Hendrik); R.J. Meijer (Ron); G. Lauria (Giuseppe); C. Tennant (Christopher); I.S.J. Merkies (Ingemar)

2012-01-01

textabstractThe Medical Research Council grading system has served through decades for the evaluation of muscle strength and has been recognized as a cardinal feature of daily neurological, rehabilitation and general medicine examination of patients, despite being respectfully criticized due to the

Curriculum Development for Enhancing Grade Nine Students' Systems Thinking

Science.gov (United States)

Hernthaisong, Preeyanan; Sitti, Somsong; Sonsupap, Kanyarat

2015-01-01

The objectives of this research were to study the development of a curriculum for enhancing grade 9 students' cognitive skills using a curriculum based on Systems Thinking Process. There were 3 phases: 1) studying of the problem; 2) development of tentative curriculum; and 3) implementation of the curriculum in a pilot study. The samples were 32…

A simple and accurate grading system for orthoiodohippurate renal scans in the assessment of post-transplant renal function

International Nuclear Information System (INIS)

Zaki, S.K.; Bretan, P.N.; Go, R.T.; Rehm, P.K.; Streem, S.B.; Novick, A.C.

1990-01-01

Orthoiodohippurate renal scanning has proved to be a reliable, noninvasive method for the evaluation and followup of renal allograft function. However, a standardized system for grading renal function with this test is not available. We propose a simple grading system to distinguish the different functional phases of hippurate scanning in renal transplant recipients. This grading system was studied in 138 patients who were evaluated 1 week after renal transplantation. There was a significant correlation between the isotope renographic functional grade and clinical correlates of allograft function such as the serum creatinine level (p = 0.0001), blood urea nitrogen level (p = 0.0001), urine output (p = 0.005) and need for hemodialysis (p = 0.007). We recommend this grading system as a simple and accurate method to interpret orthoiodohippurate renal scans in the evaluation and followup of renal allograft recipients

Grading timber and glued structural members

Science.gov (United States)

David E. Kretschmann; Roland Hernandez

2006-01-01

Because of its biological nature, which is influenced by many factors as discussed in Chapter 6, the quality of timber is enormously variable. Therefore, some sort of arrangement or classification must be undertaken prior to its use, in order to get the most out of this valuable resource. It is obvious that not all lumber can be used for the same purposes because not...

Application of a uniform anatomic grading system to measure disease severity in eight emergency general surgical illnesses.

Science.gov (United States)

Crandall, Marie L; Agarwal, Suresh; Muskat, Peter; Ross, Steven; Savage, Stephanie; Schuster, Kevin; Tominaga, Gail T; Shafi, Shahid

2014-11-01

Emergent general surgical diseases encompass a broad spectrum of anatomy and pathophysiology, creating challenges for outcomes assessment, research, and surgical training. The goal of this study was to measure anatomic disease severity for eight emergent general surgical diseases using the uniform grading system of the American Association for the Surgery of Trauma (AAST). The Committee on Patient Assessment and Outcomes of AAST applied the previously developed uniform grading system to eight emergent general surgical diseases using a consensus of experts. It was then reviewed and approved by the Board of Managers of AAST. Severity grades for eight commonly encountered emergent general surgical conditions were created: breast abscess, esophageal perforation, infectious colitis, pelvic inflammatory disease, perirectal abscess, pleural space infections, soft tissue infections, and surgical site infections. The range of grades from I through V, reflect progression from mild disease, limited to within the organ itself, to widespread severe disease. This article provides a uniform grading system for measuring anatomic severity of eight emergent general surgical diseases. Consistent adoption of these grades could improve standardization for quality assurance, outcomes research, and surgical training.

Intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injuries

Energy Technology Data Exchange (ETDEWEB)

Wangensteen, Arnlaug, E-mail: arnlaug.wangensteen@nih.no [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Oslo Sports Trauma Research Center, Department of Sports Medicine, Norwegian School of Sport Sciences, Oslo (Norway); Tol, Johannes L., E-mail: johannes.tol@aspetar.com [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Amsterdam Center for Evidence Sports Medicine, Academic Medical Center (Netherlands); The Sports Physician Group, OLVG, Amsterdam (Netherlands); Roemer, Frank W. [Quantitative Imaging Center, Department of Radiology, Boston University School of Medicine, Boston, MA (United States); Department of Radiology, University of Erlangen-Nuremberg, Erlangen (Germany); Bahr, Roald [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Oslo Sports Trauma Research Center, Department of Sports Medicine, Norwegian School of Sport Sciences, Oslo (Norway); Dijkstra, H. Paul [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Crema, Michel D. [Quantitative Imaging Center, Department of Radiology, Boston University School of Medicine, Boston, MA (United States); Department of Radiology, Saint-Antoine Hospital, University Paris VI, Paris (France); Farooq, Abdulaziz [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Guermazi, Ali [Quantitative Imaging Center, Department of Radiology, Boston University School of Medicine, Boston, MA (United States)

2017-04-15

Highlights: • Three different MRI grading and classification systems for acute hamstring injuries are overall reliable. • Reliability for the subcategories within these MRI grading and classification systems remains, however, unclear. - Abstract: Objective: To assess and compare the intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injury. Methods: Male athletes (n = 40) with clinical diagnosis of acute hamstring injury and MRI ≤5 days were selected from a prospective cohort. Two radiologists independently evaluated the MRIs using standardised scoring form including the modified Peetrons grading system, the Chan acute muscle strain injury classification and the British Athletics Muscle Injury Classification. Intra-and interrater reliability was assessed with linear weighted kappa (κ) or unweighted Cohen's κ and percentage agreement was calculated. Results: We observed ‘substantial’ to ‘almost perfect’ intra- (κ range 0.65–1.00) and interrater reliability (κ range 0.77–1.00) with percentage agreement 83–100% and 88–100%, respectively, for severity gradings, overall anatomical sites and overall classifications for the three MRI systems. We observed substantial variability (κ range −0.05 to 1.00) for subcategories within the Chan classification and the British Athletics Muscle Injury Classification, however, the prevalence of positive scorings was low for some subcategories. Conclusions: The modified Peetrons grading system, overall Chan classification and overall British Athletics Muscle Injury Classification demonstrated ‘substantial' to ‘almost perfect' intra- and interrater reliability when scored by experienced radiologists. The intra- and interrater reliability for the anatomical subcategories within the classifications remains unclear.

Intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injuries

International Nuclear Information System (INIS)

Wangensteen, Arnlaug; Tol, Johannes L.; Roemer, Frank W.; Bahr, Roald; Dijkstra, H. Paul; Crema, Michel D.; Farooq, Abdulaziz; Guermazi, Ali

2017-01-01

Highlights: • Three different MRI grading and classification systems for acute hamstring injuries are overall reliable. • Reliability for the subcategories within these MRI grading and classification systems remains, however, unclear. - Abstract: Objective: To assess and compare the intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injury. Methods: Male athletes (n = 40) with clinical diagnosis of acute hamstring injury and MRI ≤5 days were selected from a prospective cohort. Two radiologists independently evaluated the MRIs using standardised scoring form including the modified Peetrons grading system, the Chan acute muscle strain injury classification and the British Athletics Muscle Injury Classification. Intra-and interrater reliability was assessed with linear weighted kappa (κ) or unweighted Cohen's κ and percentage agreement was calculated. Results: We observed ‘substantial’ to ‘almost perfect’ intra- (κ range 0.65–1.00) and interrater reliability (κ range 0.77–1.00) with percentage agreement 83–100% and 88–100%, respectively, for severity gradings, overall anatomical sites and overall classifications for the three MRI systems. We observed substantial variability (κ range −0.05 to 1.00) for subcategories within the Chan classification and the British Athletics Muscle Injury Classification, however, the prevalence of positive scorings was low for some subcategories. Conclusions: The modified Peetrons grading system, overall Chan classification and overall British Athletics Muscle Injury Classification demonstrated ‘substantial' to ‘almost perfect' intra- and interrater reliability when scored by experienced radiologists. The intra- and interrater reliability for the anatomical subcategories within the classifications remains unclear.

Is the Sky Falling? Grade Inflation and the Signaling Power of Grades.

Science.gov (United States)

Pattison, Evangeleen; Grodsky, Eric; Muller, Chandra

2013-06-01

Grades are the fundamental currency of our educational system; they signal academic achievement and non-cognitive skills to parents, employers, postsecondary gatekeepers, and students themselves. Grade inflation compromises the signaling value of grades, undermining their capacity to achieve the functions for which they are intended. We challenge the 'increases in grade point average' definition of grade inflation and argue that grade inflation must be understood in terms of the signaling power of grades. Analyzing data from four nationally representative samples, we find that in the decades following 1972: (a) grades have risen at high schools and dropped at four-year colleges, in general, and selective four-year institutions, in particular; and (b) the signaling power of grades has attenuated little, if at all.

Neonates with reduced neonatal lung function have systemic low-grade inflammation

DEFF Research Database (Denmark)

Chawes, Bo L.K.; Stokholm, Jakob; Bønnelykke, Klaus

2015-01-01

Background: Children and adults with asthma and impaired lung function have been reported to have low-grade systemic inflammation, but it is unknown whether this inflammation starts before symptoms and in particular whether low-grade inflammation is present in asymptomatic neonates with reduced...... lung function. ObjectiveWe sought to investigate the possible association between neonatal lung function and biomarkers of systemic inflammation.  Methods: Plasma levels of high-sensitivity C-reactive protein (hs-CRP), IL-1β, IL-6, TNF-α, and CXCL8 (IL-8) were measured at age 6 months in 300 children.......  Results: The neonatal forced expiratory volume at 0.5 seconds was inversely associated with hs-CRP (β-coefficient, −0.12; 95% CI, −0.21 to −0.04; P approach, including hs-CRP, IL-6...

Plutonium Finishing Plant (PFP) Criticality Alarm System Commercial Grade Item (CGI) Critical Characteristics

International Nuclear Information System (INIS)

WHITE, W.F.

1999-01-01

This document specifies the critical characteristics for Commercial Grade Items (CGI) procured for PFP's criticality alarm system as required by HNF-PRO-268 and HNF-PRO-1819. These are the minimum specifications that the equipment must meet in order to properly perform its safety function. There may be several manufacturers or models that meet the critical characteristics for any one item. PFP's Criticality Alarm System includes the nine criticality alarm system panels and their associated hardware. This includes all parts up to the first breaker in the electrical distribution system. Specific system boundaries and justifications are contained in HNF-SD-CP-SDD-003, ''Definition and Means of Maintaining the Criticality Detectors and Alarms Portion of the PFP Safety Envelope.'' The procurement requirements associated with the system necessitates procurement of some system equipment as Commercial Grade Items in accordance with HNF-PRO-268, ''Control of Purchased Items and Services.''

Grading the severity of soft tissue changes associated with metal-on-metal hip replacements: reliability of an MR grading system

Energy Technology Data Exchange (ETDEWEB)

Anderson, Helen; Cahir, John G.; Goodwin, Richard W. [Norfolk and Norwich University Hospital, Department of Radiology, Norwich, Norfolk (United Kingdom); Toms, Andoni Paul [Norfolk and Norwich University Hospital, Department of Radiology, Norwich, Norfolk (United Kingdom); Norwich Radiology Academy, Norwich (United Kingdom); Wimhurst, James; Nolan, John F. [Norfolk and Norwich University Hospital, Department of Orthopaedics, Norwich, Norfolk (United Kingdom)

2011-03-15

Metal-on-metal (MoM) soft tissue reactions or aseptic lymphocytic vasculitis-associated lesions (ALVAL) are being recognised using metal artefact reduction (MAR) MR with increasing frequency following the advent of second generation metal-on-metal bearings, but there is no standardised technique for reporting of MR appearances in this disease. The aim of this study was to measure the reliability of a grading system designed for scoring the severity of MoM disease on MRI. MRI examinations of 73 hips in 59 patients were retrospectively selected and then anonymised, randomised and reviewed by three independent observers (musculoskeletal radiologists). Each MR examination was scored as either A: normal, B: infection, C1: mild MoM disease, C2: moderate MoM disease or C3: severe MoM disease according to pre-defined criteria. Kappa correlation statistics were used to compare the observations. There was substantial agreement among all three observers; the correlation coefficient between the two most experienced observers was {kappa} = 0.78 [95% confidence intervals (CI): 0.68-0.88] and when compared with the least experienced observer coefficients were {kappa} = 0.69 (95% CI: 0.57-0.80) and {kappa} = 0.66 (95% CI: 0.54-0.78). The strongest correlation occurred for grades A, C2 and C3. The weakest correlations occurred for grades B and C1. The grading system described in this study is reliable for evaluating ALVAL in MoM prostheses using MR but is limited in differentiating mild disease from infection. (orig.)

The effects of crosscutting before gang-ripping on dimension part yields from no. 1 and 2A common red oak lumber

Science.gov (United States)

Charles, J. Gatchell; Janice K. Wiedenbeck; Elizabeth S. Walker; Elizabeth S. Walker

1996-01-01

Mills should have the option to crosscut red oak lumber prior to gang-ripping to remove crook and worthless material and to take advantage of the quality differences between board ends. At least half of No: 1 and 2A Common red oak boards will have end-to-end yield differences of at least 10 percent. Preprocessing will cause a slight decrease in overall yield but will...

Performance analysis of a compact and low-cost mapping-grade mobile laser scanning system

Science.gov (United States)

Julge, Kalev; Vajakas, Toivo; Ellmann, Artu

2017-10-01

The performance of a low-cost, self-contained, compact, and easy to deploy mapping-grade mobile laser scanning (MLS) system, which is composed of a light detection and ranging sensor Velodyne VLP-16 and a dual antenna global navigation satellite system/inertial navigation system SBG Systems Ellipse-D, is analyzed. The field tests were carried out in car-mounted and backpack modes for surveying road engineering structures (such as roads, parking lots, underpasses, and tunnels) and coastal erosion zones, respectively. The impact of applied calculation principles on trajectory postprocessing, direct georeferencing, and the theoretical accuracy of the system is analyzed. A calibration method, based on Bound Optimization BY Quadratic Approximation, for finding the boresight angles of an MLS system is proposed. The resulting MLS point clouds are compared with high-accuracy static terrestrial laser scanning data and survey-grade MLS data from a commercially manufactured MLS system. The vertical, horizontal, and relative accuracy are assessed-the root-mean-square error (RMSE) values were determined to be 8, 15, and 3 cm, respectively. Thus, the achieved mapping-grade accuracy demonstrates that this relatively compact and inexpensive self-assembled MLS can be successfully used for surveying the geometry and deformations of terrain, buildings, road, and other engineering structures.

Automated grading of wood-slabs. The development of a prototype system

DEFF Research Database (Denmark)

Ersbøll, Bjarne Kjær; Conradsen, Knut

1992-01-01

This paper proposes a method for automatically grading small beechwood slabs. The method involves two classification steps: the first step detects defects based on local visual texture; the second step utilizes the relative distribution of defects to perform a final grading assessment. At a major...... as much as possible. A vast range of types of defects has to be considered when the grading is done. This and the fact that wood is a 'natural' material means it is not easily described using ordinary vision systems. The proposed method assumes a 3-D feature space which depends on local texture......-based measures of 'lightness', 'speckle' and 'dark deviation'. These measures are calculated for each pixel in an image of a slab. The feature space is separated into 12 decision regions corresponding to 12 'defect types'; these 'defects' are labeled as clear wood, wavy grain, split, black knots, ingrown bark...

What's in a Grade? Grading Policies and Practices in Principles of Economics

Science.gov (United States)

Walstad, William B.; Miller, Laurie A.

2016-01-01

Survey results from a national sample of economics instructors describe the grading policies and practices in principles of economics courses. The survey results provide insights about absolute and relative grading systems used by instructors, the course components and their weights that determine grades, and the type of assessment items used for…

A Food-Grade Cloning System for Industrial Strains of Lactococcus lactis

Science.gov (United States)

Sørensen, Kim I.; Larsen, Rasmus; Kibenich, Annette; Junge, Mette P.; Johansen, Eric

2000-01-01

We have previously reported the construction of a food-grade cloning vector for Lactococcus using the ochre suppressor, supB, as the selective marker. This vector, pFG1, causes only a slight growth inhibition in the laboratory strain MG1363 but is unstable in the industrial strains tested. As supB suppresses both amber and ochre stop codons, which are present in 82% of all known lactococcal genes, this undesirable finding may result from the accumulation of elongated mistranslated polypeptides. Here, we report the development of a new food-grade cloning vector, pFG200, which is suitable for overexpressing a variety of genes in industrial strains of Lactococcus lactis. The vector uses an amber suppressor, supD, as selectable marker and consists entirely of Lactococcus DNA, with the exception of a small polylinker region. Using suppressible pyrimidine auxotrophs, selection and maintenance are efficient in any pyrimidine-free medium including milk. Importantly, the presence of this vector in a variety of industrial strains has no significant effect on the growth rate or the rate of acidification in milk, making this an ideal system for food-grade modification of industrially relevant L. lactis strains. The usefulness of this system is demonstrated by overexpressing the pepN gene in a number of industrial backgrounds. PMID:10742196

Grading-System-Dependent Volume Effects for Late Radiation-Induced Rectal Toxicity After Curative Radiotherapy for Prostate Cancer

International Nuclear Information System (INIS)

Laan, Hans Paul van der; Bergh, Alphons van den; Schilstra, Cornelis; Vlasman, Renske; Meertens, Harm; Langendijk, Johannes A.

2008-01-01

Purpose: To assess the association between the dose distributions in the rectum and late Radiation Therapy Oncology Group and the European Organisation for Research and Treatment of Cancer (RTOG/EORTC), Late Effects of Normal Tissue SOMA, and Common Terminology Criteria for Adverse Events (CTCAE) version 3.0 graded rectal toxicity among patients with prostate cancer treated with RT. Methods and Materials: Included in the study were 124 patients who received three-dimensional conformal RT for prostate cancer to a total dose of 70 Gy in 2-Gy fractions. All patients completed questionnaires regarding rectum complaints before RT and during long-term follow-up. Late rectum Grade 2 or worse toxicity, according to RTOG/EORTC, LENT SOMA, and CTCAE v3.0 criteria, was analyzed in relation to rectal dose and volume parameters. Results: Dose-volume thresholds (V40 ≥65%, V50 ≥55%, V65 ≥45%, V70 ≥20%, and a rectum volume ≤140 cm 3 ), significantly discriminated patients with late Grade 0-1 and Grade 2 or worse rectal toxicity, particularly using the LENT SOMA and CTCAE v3.0 systems. The rectum volume receiving ≥70 Gy (V70) was most predictive for late Grade 2 or worse rectal toxicity with each of the grading systems. The associations were strongest, however, with use of the LENT SOMA system. Conclusions: Volume effects for late radiation-induced rectal toxicity are present, but their clinical significance depends on the grading system used. This should be taken into account in the interpretation of studies reporting on radiation-induced rectal toxicity

Ceramic/polymer functionally graded material (FGM) lightweight armor system

Energy Technology Data Exchange (ETDEWEB)

Petrovic, J.J.; McClellan, K.J.

1998-12-31

This is the final report of a two-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Functionally graded material is an enabling technology for lightweight body armor improvements. The objective was to demonstrate the ability to produce functionally graded ceramic-polymer and ceramic-metal lightweight armor materials. This objective involved two aspects. The first and key aspect was the development of graded-porosity boron-carbide ceramic microstructures. The second aspect was the development of techniques for liquid infiltration of lightweight metals and polymers into the graded-porosity ceramic. The authors were successful in synthesizing boron-carbide ceramic microstructures with graded porosity. These graded-porosity boron-carbide hot-pressed pieces were then successfully liquid-infiltrated in vacuum with molten aluminum at 1,300 C, and with liquid polymers at room temperature. Thus, they were able to demonstrate the feasibility of producing boron carbide-aluminum and boron carbide-polymer functionally graded materials.

Data-driven system to predict academic grades and dropout

Science.gov (United States)

Rovira, Sergi; Puertas, Eloi

2017-01-01

Nowadays, the role of a tutor is more important than ever to prevent students dropout and improve their academic performance. This work proposes a data-driven system to extract relevant information hidden in the student academic data and, thus, help tutors to offer their pupils a more proactive personal guidance. In particular, our system, based on machine learning techniques, makes predictions of dropout intention and courses grades of students, as well as personalized course recommendations. Moreover, we present different visualizations which help in the interpretation of the results. In the experimental validation, we show that the system obtains promising results with data from the degree studies in Law, Computer Science and Mathematics of the Universitat de Barcelona. PMID:28196078

Solar-powered hot-air system

Science.gov (United States)

1979-01-01

Solar-powered air heater supplies part or all of space heating requirements of residential or commercial buildings and is interfaced with air to water heat exchanger to heat domestic hot water. System has potential application in drying agricultural products such as cotton, lumber, corn, grains, and peanuts.

A study on the establishment of safety assessment guidelines of commercial grade item dedication in digitalized safety systems

International Nuclear Information System (INIS)

Hwang, H. S.; Kim, B. R.; Oh, S. H.

1999-01-01

Because of obsolescing the components used in safety related systems of nuclear power plants, decreasing the number of suppliers qualified for the nuclear QA program and increasing maintenance costs of them, utilities have been considering to use commercial grade digital computers as an alternative for resolving such issues. However, commercial digital computers use the embedded pre-existing software, including operating system software, which are not developed by using nuclear grade QA program. Thus, it is necessary for utilities to establish processes for dedicating digital commercial grade items. A regulatory body also needs guidance to evaluate the digital commercial products properly. This paper surveyed the regulations and their regulatory guides, which establish the requirements for commercial grade items dedication, industry standards and guidances applicable to safety related systems. This paper provides some guidelines to be applied in evaluating the safety of digital upgrades and new digital plant protection systems in Korea

Implementation of a real-time statistical process control system in hardwood sawmills

Science.gov (United States)

Timothy M. Young; Brian H. Bond; Jan Wiedenbeck

2007-01-01

Variation in sawmill processes reduces the financial benefit of converting fiber from a log into lumber. Lumber is intentionally oversized during manufacture to allow for sawing variation, shrinkage from drying, and final surfacing. This oversizing of lumber due to sawing variation requires higher operating targets and leads to suboptimal fiber recovery. For more than...

Implementation of a funnel-and-gate remediation system

International Nuclear Information System (INIS)

O'Brien, K.; Keyes, G.; Sherman, N.

1997-01-01

A funnel-and-gate trademark system incorporating activated carbon was deemed the most attractive remediation method for an active lumber mill in the western United States. Petroleum hydrocarbons, chlorinated solvents, pentachlorophenol, and tetrachlorophenol were detected in on-site groundwater samples. The shallow aquifer consists of a heterogeneous mixture of marine deposits and artificial fill, underlain by low-permeability siltstones and mudstone. In the funnel-and-gate trademark system, a low-permeability cutoff wall was installed to funnel groundwater flow to a smaller area (a open-quotes gateclose quotes) where a passive below-grade treatment system treats the plume as it flows through the gate. Groundwater flow modeling focused on the inhomogeneities of the aquifer and the spatial relationship between gate(s) and barrier walls. The gate design incorporates several factors, including contaminant concentration, flow rate, and time between carbon changeouts. To minimize back pressure and maximize residence time, each gate was designed using 1.25-meter (4-foot) diameter corrugated metal pipe filled with a 1.25-meter (4-foot) thick bed of activated carbon. The configuration will allow water to flow through the treatment gates without pumps. The installed system is 190 meters (625 feet) long and treats approximately 76 L/min (20 gpm) during the winter months

Tomato grading system using machine vision technology and neuro-fuzzy networks (ANFIS

Directory of Open Access Journals (Sweden)

H Izadi

2016-04-01

Full Text Available Introduction: The quality of agricultural products is associated with their color, size and health, grading of fruits is regarded as an important step in post-harvest processing. In most cases, manual sorting inspections depends on available manpower, time consuming and their accuracy could not be guaranteed. Machine Vision is known to be a useful tool for external features measurement (e.g. size, shape, color and defects and in recent century, Machine Vision technology has been used for shape sorting. The main purpose of this study was to develop new method for tomato grading and sorting using Neuro-fuzzy system (ANFIS and to compare the accuracies of the ANFIS predicted results with those suggested by a human expert. Materials and Methods: In this study, a total of 300 image of tomatoes (Rev ground was randomly harvested, classified in 3 ripeness stage, 3 sizes and 2 health. The grading and sorting mechanism consisted of a lighting chamber (cloudy sky, lighting source and a digital camera connected to a computer. The images were recorded in a special chamber with an indirect radiation (cloudy sky with four florescent lampson each sides and camera lens was entire to lighting chamber by a hole which was only entranced to outer and covered by a camera lens. Three types of features were extracted from final images; Shap, color and texture. To receive these features, we need to have images both in color and binary format in procedure shown in Figure 1. For the first group; characteristics of the images were analysis that could offer information an surface area (S.A., maximum diameter (Dmax, minimum diameter (Dmin and average diameters. Considering to the importance of the color in acceptance of food quality by consumers, the following classification was conducted to estimate the apparent color of the tomato; 1. Classified as red (red > 90% 2. Classified as red light (red or bold pink 60-90% 3. Classified as pink (red 30-60% 4. Classified as Turning

A cerebral arteriovenous malformation grading system for gamma knife radiosurgery with the aim of early obliteration

International Nuclear Information System (INIS)

Negishi, Masatoshi; Inoue, Hiroshi K.; Hirato, Masafumi; Yokoe, Takao; Iino, Yuichi; Ohye, Chihiro; Shibazaki, Tohru

1998-01-01

Bleeding in the latency period before obliteration considerably worsens the prognosis of cerebral arteriovenous malformations (AVMs). Bleeding risk should be considered and total obliteration should performed as early as possible. In this study we investigated factors related to early obliteration following Gamma Knife radiosurgery and proposed a grading system for AVMs. Forty-six patients with cerebral AVMs followed angiographically within twelve months after Gamma Knife radiosurgery were analyzed. Four factors, volume, type (categorized by our own method), location, and marginal dose were found to be correlated with early obliteration rate. We scored these factors, and categorized the scores into a grade O to 6 Gamma Knife Score (GKS), and evaluated the obliteration rate of each grade. The total obliteration rate in twelve months according to grade was: grades 0 and 1, 61.9%; grades 2 and 3, 36.0%, grades 4 and 5, 16.7%. AVMs with a low GKS (grades 0 and 1) had a high early obliteration rate and seemed suitable for Gamma Knife radiosurgery. Since early obliteration is difficult to obtain in the high grade group, endovascular surgery should be considered to reduce the GKS before Gamma Knife radiosurgery. (author)

Changes and Trends in the Pallet Industry: The Use of New Wood Materials

Science.gov (United States)

Robert J. Bush; Philip A. Araman

1998-01-01

Wood has dominated the pallet industry as its principal raw material since palletized material handling began. Pallet production and use grew dramatically after World War II and wood remained the material of choice. Throughout this period the pallet industry has been an important market for lower grades of hardwood lumber and cants. Today, the demand for pallet grade...

Genetic Learning of Fuzzy Expert Systems for Decision Support in the Automated Process of Wooden Boards Cutting

Directory of Open Access Journals (Sweden)

Yaroslav MATSYSHYN

2014-03-01

Full Text Available Sawing solid wood (lumber, wooden boards into blanks is an important technological operation, which has significant influence on the efficiency of the woodworking industry as a whole. Selecting a rational variant of lumber cutting is a complex multicriteria problem with many stochastic factors, characterized by incomplete information and fuzzy attributes. About this property by currently used automatic optimizing cross-cut saw is not always rational use of wood raw material. And since the optimization algorithms of these saw functions as a “black box”, their improvement is not possible. Therefore topical the task of developing a new approach to the optimal cross-cutting that takes into account stochastic properties of wood as a material from biological origin. Here we propose a new approach to the problem of lumber optimal cutting in the conditions of uncertainty of lumber quantity and fuzziness lengths of defect-free areas. To account for these conditions, we applied the methods of fuzzy sets theory and used a genetic algorithm to simulate the process of human learning in the implementation the technological operation. Thus, the rules of behavior with yet another defect-free area is defined in fuzzy expert system that can be configured to perform specific production tasks using genetic algorithm. The author's implementation of the genetic algorithm is used to set up the parameters of fuzzy expert system. Working capacity of the developed system verified on simulated and real-world data. Implementation of this approach will make it suitable for the control of automated or fully automatic optimizing cross cutting of solid wood.

Classroom: Efficient Grading

Science.gov (United States)

Shaw, David D.; Pease, Leonard F., III.

2014-01-01

Grading can be accelerated to make time for more effective instruction. This article presents specific time management strategies selected to decrease administrative time required of faculty and teaching assistants, including a multiple answer multiple choice interface for exams, a three-tier grading system for open ended problem solving, and a…

Construction of the Classification and Grading Index System of Cultivated Land Based on the Viewpoint of Sustainable Development

Institute of Scientific and Technical Information of China (English)

2010-01-01

In order to objectively and reasonably evaluate the actual and potential value of cultivated land, both social and ecological values are introduced into the classification and grading index system of cultivated land based on the viewpoint of sustainable development, after considering the natural and economic values of cultivated land. Index system construction of the sustainable utilization of cultivated land should follow the principles of economic viability, social acceptability, and ecological protection. Classification of cultivated land should take into account the soil fertility of cultivated land. Then, grading of cultivated land is carried out from the practical productivity (or potential productivity) of cultivated land. According to the existing classification index system of cultivated land, the soil, natural and environmental factors in plains, mountains and hills are mainly modified in the classification index system of cultivated land. And index systems for the cultivated land classification in plains, mountains and hills are set up. The grading index system of cultivated land is established based on the economic viability (economic value), social acceptability (social value) and protection of cultivated land (ecological value). Quantitative expression of cultivated land grading index is also carried out.

Comparative evaluation of the modified Scarff-Bloom-Richardson grading system on breast carcinoma aspirates and histopathology

Directory of Open Access Journals (Sweden)

Cherry Bansal

2012-01-01

Full Text Available Background: Fine needle aspiration (FNA is a quick, minimally invasive procedure for evaluation of breast tumors. The Scarff-Bloom-Richardson (SBR grade on histological sections is a well-established tool to guide selection of adjuvant systemic therapy. Grade evaluation is possible on cytology smears to avoid and minimize the morbidity associated with overtreatment of lower grade tumors. Aim : The aim was to test the hypothesis whether breast FNA from the peripheral portion of the lesion is representative of Scarff-Bloom-Richardson grade on histopathology as compared to FNA from the central portion. Materials and Methods : Fine-needle aspirates and subsequent tissue specimens from 45 women with ductal carcinoma (not otherwise specified were studied. FNAs were performed under ultrasound guidance from the central as well as the peripheral third of the lesion for each case avoiding areas of necrosis/calcification. The SBR grading was compared on alcohol fixed aspirates and tissue sections for each case. Results : Comparative analysis of SBR grade on aspirates from the peripheral portion and histopathology by the Pearson chi-square test (χ2 =78.00 showed that it was statistically significant (P<0.001 with 93% concordance. Lower mitotic score on aspirates from the peripheral portion was observed in only 4 out of 45 (9% cases. The results of the Pearson chi-square test (χ2 = 75.824 with statistically significant (P=0.000. Conclusion : This prospective study shows that FNA smears from the peripheral portion of the lesion are representative of the grading performed on the corresponding histopathological sections. It is possible to score and grade by SBR system on FNA smears.

Wood particleboard and flakeboard : types, grades, and uses

Science.gov (United States)

C. G. Carll

1986-01-01

This report is for those who use or may want to use wood particleboard. The term bparticleboardc is used as defined in the American Society for Testing and Materials (ASTM) Standard D 1554, which includes flakeboards as a subclass of particleboards, and not as used in the lumber trade where the term is usually reserved for panels made of fine wood particles such as...

Novel grading system for quantification of cystic macular lesions in Usher syndrome.

Science.gov (United States)

Sliesoraityte, Ieva; Peto, Tunde; Mohand-Said, Saddek; Sahel, Jose Alain

2015-12-10

To evaluate novel grading system used to quantify optical coherence tomography (OCT) scans for cystic macular lesions (CML) in Usher syndrome (USH) patients, focusing on CML associated alterations in MOY7A and USH2A mutations. Two readers evaluated 76 patients' (mean age 42 ± 14 years) data prospectively uploaded on Eurush database. OCT was used to obtain high quality cross-sectional images through the fovea. The CML was graded as none, mild, moderate or severe, depending on the following features set: subretinal fluid without clearly detectable CML boundaries; central macular thickness; largest diameter of CML; calculated mean of all detectable CML; total number of detectable CML; retinal layers affected by CML. Intra-and inter-grader reproducibility was evaluated. CML were observed in 37 % of USH eyes, while 45 % were observed in MYO7A and 29 % in USH2A cases. Of those with CML: 52 % had mild, 22 % had moderate and 26 % had severe changes, respectively. CML were found in following retinal layers: 50 % inner nuclear layer, 44 % outer nuclear layer, 6 % retinal ganglion cell layer. For the inter-grader repeatability analysis, agreements rates for CML were 97 % and kappa statistics was 0.91 (95 % CI 0.83-0.99). For the intra-grader analysis, agreement rates for CML were 98 %, while kappa statistics was 0.96 (95 % CI 0.92-0.99). The novel grading system is a reproducible tool for grading OCT images in USH complicated by CML, and potentially could be used for objective tracking of macular pathology in clinical therapy trials.

Performance Analysis of a Grid-Connected Upgraded Metallurgical Grade Silicon Photovoltaic System

Directory of Open Access Journals (Sweden)

Chao Huang

2016-05-01

Full Text Available Because of their low cost, photovoltaic (PV cells made from upgraded metallurgical grade silicon (UMG-Si are a promising alternative to conventional solar grade silicon-based PV cells. This study investigates the outdoor performance of a 1.26 kW grid-connected UMG-Si PV system over five years, reporting the energy yields and performance ratio and estimating the long-term performance degradation rate. To make this investigation more meaningful, the performance of a mono-Si PV system installed at the same place and studied during the same period of time is presented for reference. Furthermore, this study systematizes and rationalizes the necessity of a data selection and filtering process to improve the accuracy of degradation rate estimation. The impact of plane-of-array irradiation threshold for data filtering on performance ratio and degradation rate is also studied. The UMG-Si PV system’s monthly performance ratio after data filtering ranged from 84% to 93% over the observation period. The annual degradation rate was 0.44% derived from time series of monthly performance ratio using the classical decomposition method. A comparison of performance ratio and degradation rate to conventional crystalline silicon-based PV systems suggests that performance of the UMG-Si PV system is comparable to that of conventional systems.

Decision support system for the detection and grading of hard exudates from color fundus photographs

Science.gov (United States)

Jaafar, Hussain F.; Nandi, Asoke K.; Al-Nuaimy, Waleed

2011-11-01

Diabetic retinopathy is a major cause of blindness, and its earliest signs include damage to the blood vessels and the formation of lesions in the retina. Automated detection and grading of hard exudates from the color fundus image is a critical step in the automated screening system for diabetic retinopathy. We propose novel methods for the detection and grading of hard exudates and the main retinal structures. For exudate detection, a novel approach based on coarse-to-fine strategy and a new image-splitting method are proposed with overall sensitivity of 93.2% and positive predictive value of 83.7% at the pixel level. The average sensitivity of the blood vessel detection is 85%, and the success rate of fovea localization is 100%. For exudate grading, a polar fovea coordinate system is adopted in accordance with medical criteria. Because of its competitive performance and ability to deal efficiently with images of variable quality, the proposed technique offers promising and efficient performance as part of an automated screening system for diabetic retinopathy.

Intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injuries.

Science.gov (United States)

Wangensteen, Arnlaug; Tol, Johannes L; Roemer, Frank W; Bahr, Roald; Dijkstra, H Paul; Crema, Michel D; Farooq, Abdulaziz; Guermazi, Ali

2017-04-01

To assess and compare the intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injury. Male athletes (n=40) with clinical diagnosis of acute hamstring injury and MRI ≤5days were selected from a prospective cohort. Two radiologists independently evaluated the MRIs using standardised scoring form including the modified Peetrons grading system, the Chan acute muscle strain injury classification and the British Athletics Muscle Injury Classification. Intra-and interrater reliability was assessed with linear weighted kappa (κ) or unweighted Cohen's κ and percentage agreement was calculated. We observed 'substantial' to 'almost perfect' intra- (κ range 0.65-1.00) and interrater reliability (κ range 0.77-1.00) with percentage agreement 83-100% and 88-100%, respectively, for severity gradings, overall anatomical sites and overall classifications for the three MRI systems. We observed substantial variability (κ range -0.05 to 1.00) for subcategories within the Chan classification and the British Athletics Muscle Injury Classification, however, the prevalence of positive scorings was low for some subcategories. The modified Peetrons grading system, overall Chan classification and overall British Athletics Muscle Injury Classification demonstrated 'substantial' to 'almost perfect' intra- and interrater reliability when scored by experienced radiologists. The intra- and interrater reliability for the anatomical subcategories within the classifications remains unclear. Copyright © 2017 Elsevier B.V. All rights reserved.

Long-term occlusal changes assessed by the American Board of Orthodontics' model grading system.

Science.gov (United States)

Aszkler, Robert M; Preston, Charles B; Saltaji, Humam; Tabbaa, Sawsan

2014-02-01

The purpose of this study was to assess the long-term posttreatment changes in all criteria of the American Board of Orthodontics' (ABO) model grading system. We used plaster models from patients' final and posttreatment records. Thirty patients treated by 1 orthodontist using 1 bracket prescription were selected. An initial discrepancy index for each subject was performed to determine the complexity of each case. The final models were then graded using the ABO's model grading system immediately at posttreatment and postretention. Statistical analysis was performed on the 8 criteria of the model grading system, including paired t tests and Pearson correlations. An alpha of 0.05 was considered statistically significant. The average length of time between the posttreatment and postretention records was 12.7 ± 4.4 years. It was shown that alignment and rotations worsened by postretention (P = 0.014), and a weak statistically significant correlation at posttreatment and postretention was found (0.44; P = 0.016). Both marginal ridges and occlusal contacts scored less well at posttreatment. These criteria showed a significant decrease in scores between posttreatment and postretention (P <0.001), but the correlations were not statistically significant. The average total score showed a significant decrease between posttreatment and postretention (P <0.001), partly because of the large decrease in the previous 2 criteria. Higher scores for occlusal contacts and marginal ridges were found at the end of treatment; however, those scores and the overall scores for the 30 subjects improved in the postretention phase. Copyright © 2014. Published by Mosby, Inc.

[Low-grade systemic inflammation and the development of metabolic diseases: from the molecular evidence to the clinical practice].

Science.gov (United States)

León-Pedroza, José Israel; González-Tapia, Luis Alonso; del Olmo-Gil, Esteban; Castellanos-Rodríguez, Diana; Escobedo, Galileo; González-Chávez, Antonio

2015-01-01

Systemic inflammation is characterised by high circulating levels of inflammatory cytokines and increased macrophage infiltration in peripheral tissues. Most importantly, this inflammatory state does not involve damage or loss of function of the infiltrated tissue, which is a distinctive feature of the low-grade systemic inflammation. The term "meta-inflammation" has also been used to refer to the low-grade systemic inflammation due to its strong relationship with the development of cardio-metabolic diseases in obesity. A review is presented on the recent clinical and experimental evidence concerning the role of adipose tissue inflammation as a key mediator of low-grade systemic inflammation. Furthermore, the main molecular mechanisms involved in the inflammatory polarization of macrophages with the ability to infiltrate both the adipose tissue and the vascular endothelium via activation of toll-like receptors by metabolic damage-associated molecular patterns, such as advanced glycation-end products and oxidized lipoproteins, is discussed. Finally, a review is made of the pathogenic mechanisms through which the low-grade systemic inflammation contributes to develop insulin resistance, dyslipidaemia, atherogenesis, type 2 diabetes, and hypertension in obese individuals. A better understanding of the molecular mechanisms of low-grade systemic inflammation in promoting cardio-metabolic diseases is necessary, in order to further design novel anti-inflammatory therapies that take into consideration clinical data, as well as the circulating levels of cytokines, immune cells, and metabolic damage-associated molecular patterns in each patient. Copyright © 2015 Academia Mexicana de Cirugía A.C. Published by Masson Doyma México S.A. All rights reserved.

A Multiple Sensor Machine Vision System for Automatic Hardwood Feature Detection

Science.gov (United States)

D. Earl Kline; Richard W. Conners; Daniel L. Schmoldt; Philip A. Araman; Robert L. Brisbin

1993-01-01

A multiple sensor machine vision prototype is being developed to scan full size hardwood lumber at industrial speeds for automatically detecting features such as knots holes, wane, stain, splits, checks, and color. The prototype integrates a multiple sensor imaging system, a materials handling system, a computer system, and application software. The prototype provides...

Visual application of the American Board of Orthodontics Grading System.

Science.gov (United States)

Scott, Steven A; Freer, Terry J

2005-05-01

Assessment of treatment outcomes has traditionally been accomplished using the subjective opinion of experienced clinicians. Reduced subjectivity in the assessment of orthodontic treatment can be achieved with the use of an occlusal index. To implement an index for quality assurance purposes is time-consuming and subject to the inherent error of the index. Quality assessment of orthodontic treatment on a routine basis has been difficult to implement in private practice. To investigate whether a clinician can accurately apply the American Board of Orthodontics Objective Grading System by direct visual inspection instead of measuring individual traits. A random sample of 30 cases was selected, including pretreatment and post-treatment upper and lower study casts and panoramic radiographs. The cases were examined and scored with the standardized measuring gauge according to the protocol provided by the American Board of Orthodontics (ABO). The records were re-examined 6 weeks later and the individual traits scored by visual inspection (VI). There were no significant differences between the pre- and post-treatment ABO gauge and VI scores. This study suggests that occlusal traits defined by the ABO Objective Grading System can be accurately assessed by visual inspection. The VI score provides a simple and convenient method for critical evaluation of treatment outcome by a clinician.

Construction of a food-grade multiple-copy integration system for Lactococcus lactis

NARCIS (Netherlands)

Leenhouts, K.; Bolhuis, A.; Venema, G.; Kok, J.

A food-grade vector system was developed that allows stable integration of multiple plasmid copies in the chromosome of Lactococcus lactis. The vector consists of the plus origin of replication (Ori(+)) of the lactococcal plasmid pWV01, the sucrose genes of the lactic acid bacterium Pediococcus

Measuring Listening Comprehension Skills of 5th Grade School Students with the Help of Web Based System

Directory of Open Access Journals (Sweden)

M. Bahaddin Acat

2016-01-01

Full Text Available The main purpose of this study is to measure listening comprehension skills of 5th grade school students with the help of web based system. This study was conducted on 5th grade students studying at the primary schools of Eskisehir. The scale used in the process of the study is “Web Based Listening Scale”. In the process of the study, it was investigated that the level of differentiation listening skill and educational level of mother and father, family income level, Turkish Course grading note, the most popular and listened music genre. According to the results obtained that significant difference was found with listening skills and educational level of mother and father, family income level and the most popular and listened music genre. Also it was found that there is powerful relationship between listening skills and Turkish Course grading note. In the process of the research, it was observed the students used the web based system more attentive and motivated. Nevertheless, personalized measuring environment was provided by the web based system. Finally, it can be said that the web based systems can be used positively for language learning, teaching, and instruction, improving, measuring and assessing process.

Let's End the Grading Game.

Science.gov (United States)

Edwards, Clifford H.; Edwards, Laurie

1999-01-01

Argues that grades have negative effects on learning and self-concept. States that while grading has a long tradition of sorting children for college entrance, there is limited evidence that grades serve a valid purpose. Argues that this practice should be abolished and an evaluation system established that provides a more valid estimate of…

Grading of direct laryngoscopy. A survey of current practice.

Science.gov (United States)

Cohen, A M; Fleming, B G; Wace, J R

1994-06-01

One hundred and twenty anaesthetists (30 of each grade), from three separate regions, were interviewed as to how they recorded the appearance of laryngeal structures at direct laryngoscopy and about their knowledge of the commonly used numerical grading system. About two-thirds of anaesthetists surveyed (69.2%) used the numerical grading system, but of these, over half could not identify a 'grade 2' laryngoscopic appearance correctly. Of anaesthetists who did not use the numerical method, over half could not correctly state the difference between a 'grade 2' and a 'grade 3' laryngoscopic appearance. Over 40% of anaesthetists stated incorrectly that the grading should be made on the initial view, even when laryngeal pressure had been needed. Junior anaesthetists were more likely to use the numerical method of recording. The results show that there is unacceptable uncertainty and inaccuracy in the use of the numerical grading system by users as well as non-users, which makes the current routine clinical use of the numerical grading system unsatisfactory.

Grades and Incentives: Assessing Competing Grade Point Average Measures and Postgraduate Outcomes

Science.gov (United States)

Bailey, Michael A.; Rosenthal, Jeffrey S.; Yoon, Albert H.

2016-01-01

In many educational settings, students may have an incentive to take courses where high grades are easier to achieve, potentially corroding student learning, evaluation of student achievement, and the fairness and efficiency of post-graduation labor outcomes. A grading system that takes into account heterogeneity of teacher standards and student…

Development of Necessary Technology for Safety Grade I and C System

International Nuclear Information System (INIS)

Lee, Dong Young; Jang, Tong Il; Kim, Jung Tack

2010-08-01

Through KNICS and Nu-Tech 2012, a MMIS(Man-Machine Interface System) package for nuclear plants was localized and is expected to be applied to SUN 1,2 plants. This study is aimed to support the application of the MMIS package including the following technologies that meet strengthened regulation requirements and enhanced utility's performance requirements to nuclear plants. - Dedication to safety-grade computers - The broadband communication network for safety information - Application of the automatic test for safety systems - Application of programmable logic controllers to nuclear plant

Video image analysis as a potential grading system for Uruguayan beef carcasses.

Science.gov (United States)

Vote, D J; Bowling, M B; Cunha, B C N; Belk, K E; Tatum, J D; Montossi, F; Smith, G C

2009-07-01

A study was conducted in 2 phases to evaluate the effectiveness of 1) the VIAscan Beef Carcass System (BCSys; hot carcass system) and the CVS BeefCam (chilled carcass system), used independently or in combination, to predict Uruguayan beef carcass fabrication yields; and 2) the CVS BeefCam to segregate Uruguayan beef carcasses into groups that differ in the Warner-Bratzler shear force (WBSF) values of their LM steaks. The results from the meat yield phase of the present study indicated that the prediction of saleable meat yield percentages from Uruguayan beef carcasses by use of the BCSys or CVS BeefCam is similar to, or slightly better than, the use of USDA yield grade calculated to the nearest 0.1 and was much more effective than prediction based on Uruguay National Institute of Meat (INAC) grades. A further improvement in fabrication yield prediction could be obtained by use of a dual-component video image analysis (VIA) system. Whichever method of VIA prediction of fabrication yield is used, a single predicted value of fabrication yield for every carcass removes an impediment to the implementation of a value-based pricing system. Additionally, a VIA method of predicting carcass yield has the advantage over the current INAC classification system in that estimates would be produced by an instrument rather than by packing plant personnel, which would appeal to cattle producers. Results from the tenderness phase of the study indicated that the CVS BeefCam output variable for marbling was not (P > 0.05) able to segregate steer and heifer carcasses into groups that differed in WBSF values. In addition, the results of segregating steer and heifer carcasses according to muscle color output variables indicate that muscle maturity and skeletal maturity were useful for segregating carcasses according to differences in WBSF values of their steaks (P > 0.05). Use of VIA to predict beef carcass fabrication yields could improve accuracy and reduce subjectivity in comparison

Development and Assessment of Memorial Sloan Kettering Cancer Center’s Surgical Secondary Events Grading System

Science.gov (United States)

Strong, Vivian E.; Selby, Luke V.; Sovel, Mindy; Disa, Joseph J.; Hoskins, William; DeMatteo, Ronald; Scardino, Peter; Jaques, David P.

2015-01-01

Background Studying surgical secondary events is an evolving effort with no current established system for database design, standard reporting, or definitions. Using the Clavien-Dindo classification as a guide, in 2001 we developed a Surgical Secondary Events database based on grade of event and required intervention to begin prospectively recording and analyzing all surgical secondary events (SSE). Study Design Events are prospectively entered into the database by attending surgeons, house staff, and research staff. In 2008 we performed a blinded external audit of 1,498 operations that were randomly selected to examine the quality and reliability of the data. Results 1,498 of 4,284 operations during the 3rd quarter of 2008 were audited. 79% (N=1,180) of the operations did not have a secondary event while 21% (N=318) of operations had an identified event. 91% (1,365) of operations were correctly entered into the SSE database. 97% (129/133) of missed secondary events were Grades I and II. Three Grade III (2%) and one Grade IV (1%) secondary event were missed. There were no missed Grade 5 secondary events. Conclusion Grade III – IV events are more accurately collected than Grade I – II events. Robust and accurate secondary events data can be collected by clinicians and research staff and these data can safely be used for quality improvement projects and research. PMID:25319579

Social validity of the Social Skills Improvement System-Classwide Intervention Program (SSIS-CIP) in the primary grades.

Science.gov (United States)

Wollersheim Shervey, Sarah; Sandilos, Lia E; DiPerna, James C; Lei, Pui-Wa

2017-09-01

The purpose of this study was to examine the social validity of the Social Skills Improvement System-Classwide Intervention Program (SSIS-CIP) for teachers in the primary grades. Participants included 45 first and second grade teachers who completed a 16-item social validity questionnaire during each year of the SSIS-CIP efficacy trial. Findings indicated that teachers generally perceived the SSIS-CIP as a socially valid and feasible intervention for primary grades; however, teachers' ratings regarding ease of implementation and relevance and sequence demonstrated differences across grade levels in the second year of implementation. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Evaluation of novel scoring system named 5-5-5 exacerbation grading scale for allergic conjunctivitis disease.

Science.gov (United States)

Shoji, Jun; Inada, Noriko; Sawa, Mitsuru

2009-12-01

The objective of this study is to evaluate the practical usefulness of a scoring system using the 5-5-5 exacerbation grading scale for allergic conjunctivitis disease (ACD). Subjects were 103 patients with ACD including 40 patients with vernal keratoconjunctivitis (VKC), 20 patients with atopic keratoconjunctivitis (AKC), and 43 patients with allergic conjunctivitis (AC). The 5-5-5 exacerbation grading scale consists of the following 3 graded groups of clinical observations: the 100-point-grade group (100 points for each observation) includes active giant papillae, gelatinous infiltrates of the limbus, exfoliative epithelial keratopathy, shield ulcer and papillary proliferation at lower palpebral conjunctiva; the 10-point-grade group (10 points for each observation) includes blepharitis, papillary proliferation with velvety appearance, Horner-Trantas spots, edema of bulbal conjunctiva, and superficial punctate keratopathy; and the 1-point-grade group (1 point for each observation) includes papillae at upper palpebral conjunctiva, follicular lesion at lower palpebral conjunctiva, hyperemia of palpebral conjunctiva, hyperemia of bulbal conjunctiva, and lacrimal effusion. The total points in each grade group were determined as the severity score of the 5-5-5 exacerbation grading scale. The median severity scores of the 5-5-5 exacerbation grading scale in VKC, AKC and AC were 243 (range: 12-444), 32.5 (11-344), and 13 (2-33), respectively. The severity score of each ACD disease type was significantly different (P Kruskal-Wallis test). The severity of each type of ACD was classified as severe, moderate, or mild according to the severity score. The 5-5-5 exacerbation grading scale is a useful clinical tool for grading the severity of each type of ACD.

The applicability of a weight loss grading system in cancer cachexia: a longitudinal analysis.

Science.gov (United States)

Vagnildhaug, Ola Magne; Blum, David; Wilcock, Andrew; Fayers, Peter; Strasser, Florian; Baracos, Vickie E; Hjermstad, Marianne J; Kaasa, Stein; Laird, Barry; Solheim, Tora S

2017-10-01

A body mass index (BMI) adjusted weight loss grading system (WLGS) is related to survival in patients with cancer. The aim of this study was to examine the applicability of the WLGS by confirming its prognostic validity, evaluating its relationship to cachexia domains, and exploring its ability to predict cachexia progression. An international, prospective observational study of patients with incurable cancer was conducted. For each patient, weight loss grade was scored 0-4. Weight loss grade 0 represents a high BMI with limited weight loss, progressing through to weight loss grade 4 representing low BMI and a high degree of weight loss. Survival analyses were used to confirm prognostic validity. Analyses of variance were used to evaluate the relationship between the WLGS and cachexia domains [anorexia, dietary intake, Karnofsky performance status (KPS), and physical and emotional functioning]. Cox regression was used to evaluate if the addition of cachexia domains to the WLGS improved prognostic accuracy. Predictive ability of cachexia progression was assessed by estimating proportion of patients progressing to a more advanced weight loss grade. One thousand four hundred six patients were analysed (median age 66 years; 50% female, 63% KPS ≤ 70). The overall effect of the WLGS on survival was significant as expressed by change in -2 log likelihood (P cachexia domains significantly deteriorated with increasing weight loss grade, and deterioration was greatest for dietary intake, with a difference corresponding to 0.87 standard deviations between weight loss grades 0 and 4. The addition of KPS, anorexia, and physical and emotional functioning improved the prognostic accuracy of the WLGS. Likelihood of cachexia progression was greater in patients with weight loss grade 2 (39%) than that with weight loss grade 0 (19%) or 1 (22%). The WLGS is related to survival, cachexia domains, and the likelihood of progression. Adding certain cachexia domains to the WLGS

The Fuhrman grading system has no prognostic value in patients with nonsarcomatoid chromophobe renal cell carcinoma.

Science.gov (United States)

Steffens, Sandra; Janssen, Martin; Roos, Frederik C; Becker, Frank; Steinestel, Julie; Abbas, Mahmoud; Steinestel, Konrad; Wegener, Gerd; Siemer, Stefan; Thüroff, Joachim W; Hofmann, Rainer; Stöckle, Michael; Schrader, Mark; Hartmann, Arndt; Hasenfus, Andrea; Kuczyk, Markus A; Junker, Kerstin; Schrader, Andres J

2014-12-01

The prognostic value of the Fuhrman nuclear grading system has been questioned for chromophobe renal cell carcinoma (chRCC) because this subtype frequently displays nuclear and nucleolar pleomorphism. The present study reevaluates this grading system in a series of patients with nonsarcomatoid chRCC. We identified 176 patients (3.6%) with nonsarcomatoid chRCC in a total of 4897 patients who underwent surgery for renal cell carcinoma at 5 centers in Germany between 1990 and 2010. The mean follow-up was 51.1 months. The 3 groups (G1 versus G2 versus G3/4) were comparable in terms of age, sex, tumor diameter, and lymph node metastasis. They only differed significantly in tumor stage (P = .01) and the incidence of synchronous visceral metastasis (P = .04). The 5-year cancer-specific survival rates were 84.4% for G1 (n = 32), 84.3% for G2 (n = 108), and 74.1% for G3/4 tumors (n = 33) (P = .58). Accordingly, multivariate analysis including age, sex, tumor stage, and metastatic disease did not identify Fuhrman grading as an independent predictor of cancer-specific survival in patients with chRCC (P = .4). We were able to demonstrate in a large multicenter cohort that the Fuhrman grading system does not qualify as a prognostic tool in patients with chRCC. Copyright © 2014 Elsevier Inc. All rights reserved.

Revised definition of neuropathic pain and its grading system: an open case series illustrating its use in clinical practice.

Science.gov (United States)

Geber, Christian; Baumgärtner, Ulf; Schwab, Rainer; Müller, Harald; Stoeter, Peter; Dieterich, Marianne; Sommer, Clemens; Birklein, Frank; Treede, Rolf-Detlef

2009-10-01

The definition of neuropathic pain has recently been revised by an expert committee of the Neuropathic Pain Special Interest Group of the International Association for the Study of Pain (NeuPSIG) as "pain arising as direct consequence of a lesion or disease affecting the somatosensory system," and a grading system of "definite," "probable," and "possible" neuropathic pain has been introduced. This open case series of 5 outpatients (3 men, 2 women; mean age 48 +/- 12 years) demonstrates how the grading system can be applied, in combination with appropriate confirmatory testing, to diagnosis neuropathic conditions in clinical practice. The proposed grading system includes a dynamic algorithm that enhances the physician's ability to determine with a greater level of certainty whether a pain condition is neuropathic. Its clinical use should be further validated in prospective studies.

Grading Practices and Distributions Across Internal Medicine Clerkships.

Science.gov (United States)

Fazio, Sara B; Torre, Dario M; DeFer, Thomas M

2016-01-01

Clerkship evaluation and grading practices vary widely between U.S. medical schools. Grade inflation continues to exist, and grade distribution is likely to be different among U.S. medical schools. Increasing the number of available grades curtails "grade inflation." A national survey of all Clerkship Directors in Internal Medicine members was administered in 2011. The authors assessed key aspects of grading. Response rate was 76%. Among clerkship directors (CDs), 61% of respondents agreed that grade inflation existed in the internal medicine clerkship at their school, and 43% believed that it helped students obtain better residency positions. With respect to grading practices, 79% of CDs define specific behaviors needed to achieve each grade, and 36% specify an ideal grade distribution. In addition, 44% have a trained core faculty responsible for evaluating students, 35% describe formal grading meetings, and 39% use the Reporter-Interpreter-Manager-Educator (RIME) scheme. Grading scales were described as follows: 4% utilize a pass/fail system, 13% a 3-tier (e.g., Honors/Pass/Fail), 45% 4-tier, 35% 5-tier, and 4% 6+-tier system. There was a trend to higher grades with more tiers available. Grade inflation continues in the internal medicine clerkship. Almost half of CDs feel that this practice assists students to obtain better residency positions. A minority of programs have a trained core faculty who are responsible for evaluation. About one third have formal grading meetings and use the RIME system; both have been associated with more robust and balanced grading practices. In particular, there is a wide variation between schools in the percentage of students who are awarded the highest grade, which has implications for residency applications. Downstream users of clinical clerkship grades must be fully aware of these variations in grading in order to appropriately judge medical student performance.

High-speed potato grading and quality inspection based on a color vision system

Science.gov (United States)

Noordam, Jacco C.; Otten, Gerwoud W.; Timmermans, Toine J. M.; van Zwol, Bauke H.

2000-03-01

A high-speed machine vision system for the quality inspection and grading of potatoes has been developed. The vision system grades potatoes on size, shape and external defects such as greening, mechanical damages, rhizoctonia, silver scab, common scab, cracks and growth cracks. A 3-CCD line-scan camera inspects the potatoes in flight as they pass under the camera. The use of mirrors to obtain a 360-degree view of the potato and the lack of product holders guarantee a full view of the potato. To achieve the required capacity of 12 tons/hour, 11 SHARC Digital Signal Processors perform the image processing and classification tasks. The total capacity of the system is about 50 potatoes/sec. The color segmentation procedure uses Linear Discriminant Analysis (LDA) in combination with a Mahalanobis distance classifier to classify the pixels. The procedure for the detection of misshapen potatoes uses a Fourier based shape classification technique. Features such as area, eccentricity and central moments are used to discriminate between similar colored defects. Experiments with red and yellow skin-colored potatoes have shown that the system is robust and consistent in its classification.

Yield and ultrasonic modulus of elasticity of red maple veneer

Science.gov (United States)

Robert J. Ross; Steven Verhey; John R. Erickson; John W. Forsman; Brian K. Brashaw; Crystal L. Pilon; Xiping Wang

2004-01-01

The purpose of the study was to assess the potential for using red maple sawlogs to manufacture laminated veneer lumber (LVL). The primary objective was to determine the yield of ultrasonically graded veneer from red maple logs. A sample of 48 logs was obtained from six Eastern and Lake States in the United States. The logs were visually graded and shipped to a plywood...

Reproducibility of the acute rejection diagnosis in human cardiac allografts. The Stanford Classification and the International Grading System

DEFF Research Database (Denmark)

Nielsen, H; Sørensen, Flemming Brandt; Nielsen, B

1993-01-01

Transplantation has become an accepted treatment of many cardiac end-stage diseases. Acute cellular rejection accounts for 15% to 20% of all graft failures. The first grading system of acute cellular rejection, the Stanford Classification, was introduced in 1979, and since then many other grading...

Susceptibility Imaging in Glial Tumor Grading; Using 3 Tesla Magnetic Resonance (MR) System and 32 Channel Head Coil.

Science.gov (United States)

Aydin, Omer; Buyukkaya, Ramazan; Hakyemez, Bahattin

2017-01-01

Susceptibility weighted imaging (SWI) is a velocity compensated, high-resolution three-dimensional (3D) spoiled gradient-echo sequence that uses magnitude and filtered-phase data. SWI seems to be a valuable tool for non-invasive evaluation of central nervous system gliomas. Relative cerebral blood volume (rCBV) ratio is one of the best noninvasive methods for glioma grading. Degree of intratumoral susceptibility signal (ITSS) on SWI correlates with rCBV ratio and histopathological grade. This study investigated the effectiveness of ITSS grading and rCBV ratio in preoperative assessment. Thirty-one patients (17 males and 14 females) with histopathogical diagnosis of glial tumor undergoing routine cranial MRI, SWI, and perfusion MRI examinations between October 2011 and July 2013 were retrospectively enrolled. All examinations were performed using 3T apparatus with 32-channel head coil. We used ITSS number for SWI grading. Correlations between SWI grade, rCBV ratio, and pathological grading were evaluated. ROC analysis was performed to determine the optimal rCBV ratio to distinguish between high-grade and low-grade glial tumors. There was a strong positive correlation between both pathological and SWI grading. We determined the optimal rCBV ratio to discriminate between high-grade and low-grade tumors to be 2.21. In conclusion, perfusion MRI and SWI using 3T MR and 32-channel head coil may provide useful information for preoperative glial tumor grading. SWI can be used as an accessory to perfusion MR technique in preoperative tumor grading.

Social Validity of the Social Skills Improvement System--Classwide Intervention Program (SSIS-CIP) in the Primary Grades

Science.gov (United States)

Wollersheim Shervey, Sarah; Sandilos, Lia E.; DiPerna, James C.; Lei, Pui-Wa

2017-01-01

The purpose of this study was to examine the social validity of the Social Skills Improvement System--Classwide Intervention Program (SSIS-CIP) for teachers in the primary grades. Participants included 45 first and second grade teachers who completed a 16-item social validity questionnaire during each year of the SSIS-CIP efficacy trial. Findings…

Guidelines for guideline developers: a systematic review of grading systems for medical tests

NARCIS (Netherlands)

Gopalakrishna, Gowri; Langendam, Miranda W.; Scholten, Rob J. P. M.; Bossuyt, Patrick M. M.; Leeflang, Mariska M. G.

2013-01-01

A variety of systems have been developed to grade evidence and develop recommendations based on the available evidence. However, development of guidelines for medical tests is especially challenging given the typical indirectness of the evidence; direct evidence of the effects of testing on patient

Automated grading system for evaluation of ocular redness associated with dry eye.

Science.gov (United States)

Rodriguez, John D; Johnston, Patrick R; Ousler, George W; Smith, Lisa M; Abelson, Mark B

2013-01-01

We have observed that dry eye redness is characterized by a prominence of fine horizontal conjunctival vessels in the exposed ocular surface of the interpalpebral fissure, and have incorporated this feature into the grading of redness in clinical studies of dry eye. To develop an automated method of grading dry eye-associated ocular redness in order to expand on the clinical grading system currently used. Ninety nine images from 26 dry eye subjects were evaluated by five graders using a 0-4 (in 0.5 increments) dry eye redness (Ora Calibra™ Dry Eye Redness Scale [OCDER]) scale. For the automated method, the Opencv computer vision library was used to develop software for calculating redness and horizontal conjunctival vessels (noted as "horizontality"). From original photograph, the region of interest (ROI) was selected manually using the open source ImageJ software. Total average redness intensity (Com-Red) was calculated as a single channel 8-bit image as R - 0.83G - 0.17B, where R, G and B were the respective intensities of the red, green and blue channels. The location of vessels was detected by normalizing the blue channel and selecting pixels with an intensity of less than 97% of the mean. The horizontal component (Com-Hor) was calculated by the first order Sobel derivative in the vertical direction and the score was calculated as the average blue channel image intensity of this vertical derivative. Pearson correlation coefficients, accuracy and concordance correlation coefficients (CCC) were calculated after regression and standardized regression of the dataset. The agreement (both Pearson's and CCC) among investigators using the OCDER scale was 0.67, while the agreement of investigator to computer was 0.76. A multiple regression using both redness and horizontality improved the agreement CCC from 0.66 and 0.69 to 0.76, demonstrating the contribution of vessel geometry to the overall grade. Computer analysis of a given image has 100% repeatability and zero

Graded Alternating-Time Temporal Logic

Science.gov (United States)

Faella, Marco; Napoli, Margherita; Parente, Mimmo

Graded modalities enrich the universal and existential quantifiers with the capability to express the concept of at least k or all but k, for a non-negative integer k. Recently, temporal logics such as μ-calculus and Computational Tree Logic, Ctl, augmented with graded modalities have received attention from the scientific community, both from a theoretical side and from an applicative perspective. Both μ-calculus and Ctl naturally apply as specification languages for closed systems: in this paper, we add graded modalities to the Alternating-time Temporal Logic (Atl) introduced by Alur et al., to study how these modalities may affect specification languages for open systems.

Achievement report in fiscal 2000 on technological development to recycle waste building materials and glasses. Development of waste building material recycling technology (Research and development of recycling technology corresponding to grades of demolished building lumbers); 2000 nendo kenchiku haizai glass nado recycle gijutsu kaihatsu seika hokokusho. Kenchiku haizai recycle gijutsu kaihatsu (kenchiku kaitai mokuzai no hin'i ni taioshita recycle gijutsu no kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to reduce wastes, and promote effective utilization of wood resources, research and development has been made on a demolished building material recycling technology. This paper summarizes the achievements in fiscal 2000. In developing the technology to manufacture high water resistant wood boards, discussions were given on resor type phenolic resin as an adhesive, and on the medium density fiberboard (MDF) being a substitute material for plywood as the wooden board. As a result, a highly water resistant MDF that can clear JIS E0 has been developed. In the research of a technology to enhance durability of wooden boards, the in-liquid roll press method was devised to perform impregnation of chemicals into board raw materials continually and simply, whose device was fabricated on a trial basis. With regard to recycling of medium to low grade wood-based wastes, researches were performed on pulverization of the wastes, fabrication of liquefied woods, and effective utilization of the liquefied woods. Both of a hammer mill and a chip saw crusher fabricated wood powder with nearly uniform grain size regardless of types of the wood-based wastes. Liquefaction of plywood and PB boards required more stringent reaction conditions than liquefaction of such ordinary members as pillar materials and laminated lumbers. (NEDO)

Accordion complication grading predicts short-term outcome after right colectomy.

Science.gov (United States)

Klos, Coen L; Safar, Bashar; Hunt, Steven R; Wise, Paul E; Birnbaum, Elisa H; Mutch, Matthew G; Fleshman, James W; Dharmarajan, Sekhar

2014-08-01

The Accordion severity grading system is a novel system to score the severity of postoperative complications in a standardized fashion. This study aims to demonstrate the validity of the Accordion system in colorectal surgery by correlating severity grades with short-term outcomes after right colectomy for colon cancer. This is a retrospective cohort review of patients who underwent right colectomy for cancer between January 1, 2002, and January 31, 2007, at a single tertiary care referral center. Complications were categorized according to the Accordion severity grading system: grades 1 (mild), 2 (moderate), 3-5 (severe), and 6 (death). Outcome measures were hospital stay, 30-d readmission rate and 1-y survival. Correlation between Accordion grades and outcome measures is reflected by Spearman rho (ρ). One-year survival was obtained per Kaplan-Meier method and compared by logrank test for trend. Significance was set at P ≤ 0.05. Overall, 235 patients underwent right colectomy for cancer of which 122 (51.9%) had complications. In total, 52 (43%) had an Accordion grade 1 complication; 44 (36%) grade 2; four (3%) grade 3; 11 (9%) grade 4; seven (6%) grade 5; and four (3%) grade 6. There was significant correlation between Accordion grades and hospital stay (ρ = 0.495, P trend in 1-y survival as complication severity by Accordion grade increased (P = 0.02). The Accordion grading system is a useful tool to estimate short-term outcomes after right colectomy for cancer. High-grade Accordion complications are associated with longer hospital stay and increased risk of readmission and mortality. Published by Elsevier Inc.

Age-Related Grade Inflation Expectancies in a University Environment

Directory of Open Access Journals (Sweden)

Donald A. Loffredo

2012-01-01

Full Text Available Grade inflation is a recognized problem in higher education in the United States. Age, gender, and ethnic differences in discrepancies between student reports of their expected grade in each course and their expectations for general university grading practices were explored in a survey of 166 (mostly female participants at a small upper-division university. Results revealed that while a small minority of students agreed that grading systems in college should only include A or B grades, a large majority of students expected A or B grades. Thus, student discrepancies between their expectations for grading systems and their expected class grades were in line with expectations that they should receive inflated grades. Results also revealed statistically significant age differences in grade expectation with students older than the age of 55 expecting lower grades relative to their younger counterparts.

Independent V and V for Safety Grade I and C System

International Nuclear Information System (INIS)

Lee, Jang Soo; Kwon, Kee Choon; Lee, Dong Young

2010-08-01

Through KNICS and Nu-Tech 2012, a MMIS(Man-Machine Interface System) package for nuclear plants was localized and is expected to be applied to SUN 1,2 plants. This study is aimed to support the application of the MMIS package including the following technologies that meet strengthened regulation requirements and enhanced utility's performance requirements to nuclear plants. - Dedication to real time operating system for safety-grade computers - V and V of the broadband communication network for safety information - Independent V and V for application of programmable logic controllers to nuclear plants - Development strategy for an integrated SW development tool for control devices

Mechanical properties of rubberwood oriented strand lumber (OSL: The effect of strand length

Directory of Open Access Journals (Sweden)

Buhnnum Kyokong

2005-09-01

Full Text Available Effect of strand length on mechanical properties (tension, compression and bending of oriented strand lumber (OSL made of rubberwood (Hevea brasiliensis Muell. Arg. was reported. Three strand lengths of 50 mm, 100 mm, and 150 mm with 1 mm thickness and 15 mm width were used. The strands were mixed with 5% pMDI glue (weight basis in a tumble mixer. The OSL specimens were formed by hot pressing process of unidirectionally aligned strands. Average specific gravity and moisture content were 0.76 and 8.34%, respectively. Tension and compression tests were carried out for directions both parallel and perpendicular to grain while bending test was performed only in parallel direction. Ultimate stresses and moduli of elasticity were examined from the stress-strain curves. It was found that for the parallel-to-grain direction, the longer strand OSL gave higher strength. The role of the strand length did not appear for the direction normal to the grain. The relationship between the mechanical properties of OSL and strand length was well described by the modified Hankinson formula.

Measuring Listening Comprehension Skills of 5th Grade School Students with the Help of Web Based System

Science.gov (United States)

Acat, M. Bahaddin; Demiral, Hilmi; Kaya, Mehmet Fatih

2016-01-01

The main purpose of this study is to measure listening comprehension skills of 5th grade school students with the help of web based system. This study was conducted on 5th grade students studying at the primary schools of Eskisehir. The scale used in the process of the study is "Web Based Listening Scale". In the process of the study,…

The Most Preferred and Effective Reviewer of L2 Writing among Automated Grading System, Peer Reviewer and Teacher

Science.gov (United States)

Tsai, Min-Hsiu

2017-01-01

Who is the most preferred and deemed the most helpful reviewer in improving student writing? This study exercised a blended teaching method which consists of three currently prevailing reviewers: the automated grading system (AGS, a web-based method), the peer review (a process-oriented approach), and the teacher grading technique (the…

Fatty degeneration of the rotator cuff muscles on pre- and postoperative CT arthrography (CTA): is the Goutallier grading system reliable?

International Nuclear Information System (INIS)

Lee, Eugene; Choi, Jung-Ah; Kang, Heung Sik; Oh, Joo Han; Ahn, Soyeon; Hong, Sung Hwan; Chai, Jee Won

2013-01-01

To retrospectively evaluate fatty degeneration (FD) of rotator cuff muscles on CTA using Goutallier's grading system and quantitative measurements with comparison between pre- and postoperative states. IRB approval was obtained for this study. Two radiologists independently reviewed pre- and postoperative CTAs of 43 patients (24 males and 19 females, mean age, 58.1 years) with 46 shoulders confirmed as full-thickness tears with random distribution. FD of supraspinatus, infraspinatus/teres minor, and subscapularis was assessed using Goutallier's system and by quantitative measurements of Hounsfield units (HUs) on sagittal images. Changes in FD grades and HUs were compared between pre- and postoperative CTAs and analyzed with respect to preoperative tear size and postoperative cuff integrity. The correlations between qualitative grades and quantitative measurements and their inter-observer reliabilities were also assessed. There was statistically significant correlation between FD grades and HU measurements of all muscles on pre- and postoperative CTA (p 0.05). The average dose-length product (DLP, mGy . cm) was 365.2 mGy . cm (range, 323.8-417.2 mGy . cm) and estimated average effective dose was 5.1 mSv. Goutallier grades correlated well with HUs of rotator cuff muscles. Reliability was excellent for both systems, except for FD grade of IST/TM muscles, which may be more reliably assessed using quantitative measurements. (orig.)

Optimizing a machine learning based glioma grading system using multi-parametric MRI histogram and texture features.

Science.gov (United States)

Zhang, Xin; Yan, Lin-Feng; Hu, Yu-Chuan; Li, Gang; Yang, Yang; Han, Yu; Sun, Ying-Zhi; Liu, Zhi-Cheng; Tian, Qiang; Han, Zi-Yang; Liu, Le-De; Hu, Bin-Quan; Qiu, Zi-Yu; Wang, Wen; Cui, Guang-Bin

2017-07-18

Current machine learning techniques provide the opportunity to develop noninvasive and automated glioma grading tools, by utilizing quantitative parameters derived from multi-modal magnetic resonance imaging (MRI) data. However, the efficacies of different machine learning methods in glioma grading have not been investigated.A comprehensive comparison of varied machine learning methods in differentiating low-grade gliomas (LGGs) and high-grade gliomas (HGGs) as well as WHO grade II, III and IV gliomas based on multi-parametric MRI images was proposed in the current study. The parametric histogram and image texture attributes of 120 glioma patients were extracted from the perfusion, diffusion and permeability parametric maps of preoperative MRI. Then, 25 commonly used machine learning classifiers combined with 8 independent attribute selection methods were applied and evaluated using leave-one-out cross validation (LOOCV) strategy. Besides, the influences of parameter selection on the classifying performances were investigated. We found that support vector machine (SVM) exhibited superior performance to other classifiers. By combining all tumor attributes with synthetic minority over-sampling technique (SMOTE), the highest classifying accuracy of 0.945 or 0.961 for LGG and HGG or grade II, III and IV gliomas was achieved. Application of Recursive Feature Elimination (RFE) attribute selection strategy further improved the classifying accuracies. Besides, the performances of LibSVM, SMO, IBk classifiers were influenced by some key parameters such as kernel type, c, gama, K, etc. SVM is a promising tool in developing automated preoperative glioma grading system, especially when being combined with RFE strategy. Model parameters should be considered in glioma grading model optimization.

Modeling Erlang's Ideal Grading with Multirate BPP Traffic

Directory of Open Access Journals (Sweden)

Mariusz Glabowski

2012-01-01

Full Text Available This paper presents a complete methodology for modeling gradings (also called non-full-availability groups servicing single-service and multi-service traffic streams. The methodology worked out by the authors makes it possible to determine traffic characteristics of various types of gradings with state-dependent call arrival processes, including a new proposed structure of the Erlang’s Ideal Grading with the multirate links. The elaborated models of the gradings can be used for modeling different systems of modern networks, for example, the radio interfaces of the UMTS system, switching networks carrying a mixture of different multirate traffic streams, and video-on-demand systems. The results of the analytical calculations are compared with the results of the simulation data for selected gradings, which confirm high accuracy of the proposed methodology.

Perceptions of restaurateurs on quality grading

Directory of Open Access Journals (Sweden)

Joseph Roberson

2014-01-01

Full Text Available A restaurateur's strategic focus is to maximise wealth for the owner(s. To achieve wealth maximisation, a restaurateur could implement one or more of the following strategies: focus strategy, cost-leadership strategy and/or differentiation strategy. A management intervention a restaurateur could implement to achieve this is quality differentiation. Grading of an establishment will assist a restaurateur in becoming a market leader. Currently there no national restaurant grading system exists in South Africa. As support and participation of restaurateurs in any future quality grading system are essential, it is imperative to test their perceptions of the implementation of a quality grading scale. The aim of this paper is to gather the perceptions of restaurateurs of an envisaged scale that could be used to grade independent full-service restaurants. In this study the researcher tested the perceptions of restaurateurs using nine possible outcomes of implementing quality grading in the independent fullservice restaurant segment. The outcomes to be tested were presented to restaurateurs in a questionnaire uploaded on "survey monkey". This was emailed to 3 286 restaurateurs and 265 responses were received. Respondents who were positive regarding grading indicated that they were enthusiastic about the impact grading would have on international tourism, as well as the fact that it could contribute to an increase in the value of their establishments.

Interference studies with two hospital-grade and two home-grade glucose meters.

Science.gov (United States)

Lyon, Martha E; Baskin, Leland B; Braakman, Sandy; Presti, Steven; Dubois, Jeffrey; Shirey, Terry

2009-10-01

Interference studies of four glucose meters (Nova Biomedical [Waltham, MA] StatStrip [hospital grade], Roche Diagnostics [Indianapolis, IN] Accu-Chek Aviva [home grade], Abbott Diabetes Care [Alameda, CA] Precision FreeStyle Freedom [home grade], and LifeScan [Milpitas, CA] SureStep Flexx [hospital grade]) were evaluated and compared to the clinical laboratory plasma hexokinase reference method (Roche Hitachi 912 chemistry analyzer). These meters were chosen to reflect the continuum of care from hospital to home grade meters commonly seen in North America. Within-run precision was determined using a freshly prepared whole blood sample spiked with concentrated glucose to give three glucose concentrations. Day-to-day precision was evaluated using aqueous control materials supplied by each vendor. Common interferences, including hematocrit, maltose, and ascorbate, were tested alone and in combination with one another on each of the four glucose testing devices at three blood glucose concentrations. Within-run precision for all glucose meters was glucose meters. Ascorbate caused differences (percentage change from a sample without added interfering substances) of >5% with pyrroloquinolinequinone (PQQ)-glucose dehydrogenase-based technologies (Aviva and Freestyle) and the glucose oxidase-based Flexx meter. Maltose strongly affected the PQQ-glucose dehydrogenase-based meter systems. When combinations of interferences (ascorbate, maltose, and hematocrit mixtures) were tested, the extent of the interference was up to 193% (Aviva), 179% (FreeStyle), 25.1% (Flexx), and 5.9% (StatStrip). The interference was most pronounced at low glucose (3.9-4.4 mmol/L). All evaluated glucose meter systems demonstrated varying degrees of interference by hematocrit, ascorbate, and maltose mixtures. PQQ-glucose dehydrogenase-based technologies showed greater susceptibility than glucose oxidase-based systems. However, the modified glucose oxidase-based amperometric method (Nova StatStrip) was

Independent V and V for Safety Grade I and C System

Energy Technology Data Exchange (ETDEWEB)

Lee, Jang Soo; Kwon, Kee Choon; Lee, Dong Young [KAERI, Daejeon (Korea, Republic of)

2010-08-15

Through KNICS and Nu-Tech 2012, a MMIS(Man-Machine Interface System) package for nuclear plants was localized and is expected to be applied to SUN 1,2 plants. This study is aimed to support the application of the MMIS package including the following technologies that meet strengthened regulation requirements and enhanced utility's performance requirements to nuclear plants. - Dedication to real time operating system for safety-grade computers - V and V of the broadband communication network for safety information - Independent V and V for application of programmable logic controllers to nuclear plants - Development strategy for an integrated SW development tool for control devices

Fabrication and Performance of a Glue-Pressed Engineered Honeycomb Bamboo (GPEHB Structure with Finger-jointed Ends as a Potential Substitute for Wood Lumber

Directory of Open Access Journals (Sweden)

Jianbo Zhou

2015-04-01

Full Text Available With the increasing scarcity of wood as a natural resource, bamboo has become a popular substitute for wood. The present work developed a high-strength original state multi-reorganization material (GPEHB, without the use of a hot press or traditional assembly. The original bamboo units were polygonized into outer contours and milled into finger-joints on each ending. The GPEHB was organized and assembled under an external press, using industrial adhesives. The mechanical properties and thermal insulation of GPEHB were characterized. Moreover, the overall GPEHB unit bending strength was 73.15 MPa, and the parallel-to-grain compression was 55.22 MPa (higher than that of Pinus sylvestris lumber, though less than that of glued laminated bamboo. The GPEHB unit overall density was 0.24 g/cm³, 76% lower than that of glued laminated bamboo, and 50% lower than Pinus sylvestris lumber. The compressive strength of GPEHB (7 units was 170.5 kN, while the compressive strength of GPEHB for 14 units was 493.5 kN, which meet the requirements of GB 50005 (2003. The bending strength of GPEHB 7 units was 12 kN, while that of 14 units was 37 kN. The heat conductivity coefficient for GPEHB was 0.25 W/mK, which is better than concrete and steel. The GPEHB has taken full advantage of its honeycomb-structured material, which allows it to avoid stress concentration in the regular polygonal corners.

Bruxism defined and graded: an international consensus.

Science.gov (United States)

Lobbezoo, F; Ahlberg, J; Glaros, A G; Kato, T; Koyano, K; Lavigne, G J; de Leeuw, R; Manfredini, D; Svensson, P; Winocur, E

2013-01-01

To date, there is no consensus about the definition and diagnostic grading of bruxism. A written consensus discussion was held among an international group of bruxism experts as to formulate a definition of bruxism and to suggest a grading system for its operationalisation. The expert group defined bruxism as a repetitive jaw-muscle activity characterised by clenching or grinding of the teeth and/or by bracing or thrusting of the mandible. Bruxism has two distinct circadian manifestations: it can occur during sleep (indicated as sleep bruxism) or during wakefulness (indicated as awake bruxism). For the operationalisation of this definition, the expert group proposes a diagnostic grading system of 'possible', 'probable' and 'definite' sleep or awake bruxism. The proposed definition and grading system are suggested for clinical and research purposes in all relevant dental and medical domains. © 2012 Blackwell Publishing Ltd.

Computer-Aided Grading of Lymphangioleiomyomatosis (LAM) using HRCT

Science.gov (United States)

Yao, Jianhua; Avila, Nilo; Dwyer, Andrew; Taveira-DaSilva, Angelo M.; Hathaway, Olanda M.; Moss, Joel

2010-01-01

Lymphangioleiomyomatosis (LAM) is a multisystem disorder associated with proliferation of smooth muscle-like cells, which leads to destruction of lung parenchyma. Subjective grading of LAM on HRCT is imprecise and can be arduous especially in cases with severe involvement. We propose a computer-aided evaluation system that grades LAM involvement based on analysis of lung texture patterns. A committee of support vector machines is employed for classification. The system was tested on 36 patients. The computer grade demonstrates good correlation with subjective radiologist grade (R=0.91, p<0.0001) and pulmonary functional tests (R=0.85, p<0.0001). The grade also provides precise progression assessment of disease over time. PMID:21625320

Automated grading system for evaluation of ocular redness associated with dry eye

Directory of Open Access Journals (Sweden)

Rodriguez JD

2013-06-01

Full Text Available John D Rodriguez,1 Patrick R Johnston,1 George W Ousler III,1 Lisa M Smith,1 Mark B Abelson1,21Ora, Inc, Andover, MA, USA; 2Department of Ophthalmology, Harvard Medical School, Boston, MA, USABackground: We have observed that dry eye redness is characterized by a prominence of fine horizontal conjunctival vessels in the exposed ocular surface of the interpalpebral fissure, and have incorporated this feature into the grading of redness in clinical studies of dry eye.Aim: To develop an automated method of grading dry eye-associated ocular redness in order to expand on the clinical grading system currently used.Methods: Ninety nine images from 26 dry eye subjects were evaluated by five graders using a 0–4 (in 0.5 increments dry eye redness (Ora CalibraTM Dry Eye Redness Scale [OCDER] scale. For the automated method, the Opencv computer vision library was used to develop software for calculating redness and horizontal conjunctival vessels (noted as "horizontality". From original photograph, the region of interest (ROI was selected manually using the open source ImageJ software. Total average redness intensity (Com-Red was calculated as a single channel 8-bit image as R − 0.83G − 0.17B, where R, G and B were the respective intensities of the red, green and blue channels. The location of vessels was detected by normalizing the blue channel and selecting pixels with an intensity of less than 97% of the mean. The horizontal component (Com-Hor was calculated by the first order Sobel derivative in the vertical direction and the score was calculated as the average blue channel image intensity of this vertical derivative. Pearson correlation coefficients, accuracy and concordance correlation coefficients (CCC were calculated after regression and standardized regression of the dataset.Results: The agreement (both Pearson's and CCC among investigators using the OCDER scale was 0.67, while the agreement of investigator to computer was 0.76. A multiple

For Better or Worse? System-Justifying Beliefs in Sixth-Grade Predict Trajectories of Self-Esteem and Behavior Across Early Adolescence.

Science.gov (United States)

Godfrey, Erin B; Santos, Carlos E; Burson, Esther

2017-06-19

Scholars call for more attention to how marginalization influences the development of low-income and racial/ethnic minority youth and emphasize the importance of youth's subjective perceptions of contexts. This study examines how beliefs about the fairness of the American system (system justification) in sixth grade influence trajectories of self-esteem and behavior among 257 early adolescents (average age 11.4) from a diverse, low-income, middle school in an urban southwestern city. System justification was associated with higher self-esteem, less delinquent behavior, and better classroom behavior in sixth grade but worse trajectories of these outcomes from sixth to eighth grade. These findings provide novel evidence that system-justifying beliefs undermine the well-being of marginalized youth and that early adolescence is a critical developmental period for this process. © 2017 The Authors. Child Development © 2017 Society for Research in Child Development, Inc.

Advantages and Disadvantages of Weighted Grading. Research Brief

Science.gov (United States)

Walker, Karen

2004-01-01

What are the advantages and disadvantages of weighted grading? The primary purpose of weighted grading has been to encourage high school students to take more rigorous courses. This effort is then acknowledged by more weight being given to the grade for a specified class. There are numerous systems of weighted grading cited in the literature from…

Coffee Bean Grade Determination Based on Image Parameter

Directory of Open Access Journals (Sweden)

F. Ferdiansjah

2011-12-01

Full Text Available Quality standard for coffee as an agriculture commodity in Indonesia uses defect system which is regulated in Standar Nasional Indonesia (SNI for coffee bean, No: 01-2907-1999. In the Defect System standard, coffee bean is classified into six grades, from grade I to grade VI depending on the number of defect found in the coffee bean. Accuracy of this method heavily depends on the experience and the expertise of the human operators. The objective of the research is to develop a system to determine the coffee bean grading based on SNI No: 01-2907-1999. A visual sensor, a webcam connected to a computer, was used for image acquisition of coffee bean image samples, which were placed under uniform illumination of 414.5+2.9 lux. The computer performs feature extraction from parameters of coffee bean image samples in the term of texture (energy, entropy, contrast, homogeneity and color (R mean, G mean, and B mean and determines the grade of coffee bean based on the image parameters by implementing neural network algorithm. The accuracy of system testing for the coffee beans of grade I, II, III, IVA, IVB, V, and VI have the value of 100, 80, 60, 40, 100, 40, and 100%, respectively.

Comparative evaluation of H&H and WFNS grading scales with modified H&H (sans systemic disease): A study on 1000 patients with subarachnoid hemorrhage.

Science.gov (United States)

Aggarwal, Ashish; Dhandapani, Sivashanmugam; Praneeth, Kokkula; Sodhi, Harsimrat Bir Singh; Pal, Sudhir Singh; Gaudihalli, Sachin; Khandelwal, N; Mukherjee, Kanchan K; Tewari, M K; Gupta, Sunil Kumar; Mathuriya, S N

2018-01-01

The comparative studies on grading in subarachnoid hemorrhage (SAH) had several limitations such as the unclear grading of Glasgow Coma Scale 15 with neurological deficits in World Federation of Neurosurgical Societies (WFNS), and the inclusion of systemic disease in Hunt and Hess (H&H) scales. Their differential incremental impacts and optimum cut-off values for unfavourable outcome are unsettled. This is a prospective comparison of prognostic impacts of grading schemes to address these issues. SAH patients were assessed using WFNS, H&H (including systemic disease), modified H&H (sans systemic disease) and followed up with Glasgow Outcome Score (GOS) at 3 months. Their performance characteristics were analysed as incremental ordinal variables and different grading scale dichotomies using rank-order correlation, sensitivity, specificity, positive predictive value, negative predictive value, Youden's J and multivariate analyses. A total of 1016 patients were studied. As univariate incremental variable, H&H sans systemic disease had the best negative rank-order correlation coefficient (-0.453) with respect to lower GOS (p H&H sans systemic disease had the greatest adjusted incremental impact of 0.72 (95% confidence interval (CI) 0.54-0.91) against a lower GOS as compared to 0.6 (95% CI 0.45-0.74) and 0.55 (95% CI 0.42-0.68) for H&H and WFNS grades, respectively. In multivariate categorical analysis, H&H grades 4-5 sans systemic disease had the greatest impact on unfavourable GOS with an adjusted odds ratio of 6.06 (95% CI 3.94-9.32). To conclude, H&H grading sans systemic disease had the greatest impact on unfavourable GOS. Though systemic disease is an important prognostic factor, it should be considered distinctly from grading. Appropriate cut-off values suggesting unfavourable outcome for H&H and WFNS were 4-5 and 3-5, respectively, indicating the importance of neurological deficits in addition to level of consciousness.

The effect of power intensity properties of microwave modified oil palm trunk lumber

Science.gov (United States)

Izzati Ibrahim, Anis; Salim, Nurjannah; Roslan, Rasidi; Ashry Jusoh, Mohammad; Hashim, Rokiah

2018-04-01

In the decade, oil palm (Elaeis guineensis) in Malaysia is one of the conventional sources that will be rising, and the rate of biomass will considerably increase in yet to come. Presently, oil palm biomass is going through research and development and appears to be the most sustainable alternative. Investigations on oil palm biomass have been conducted to support in draw out waste of oil palm and in the meantime can help economic yield to the country. This study was expected to estimate the effect of power intensity properties of microwave modified oil palm trunk lumber. Microwave treatment of oil palm trunk samples was set of connections by using a microwave operating at 2.45 GHz with the liberated process input power intensity (600-1000W) were studied under the given condition. Impact and compression of the samples were tested. The analysis of properties of the fresh material and dry samples was employed by scanning electron microscopy. Oven drying technique also was involved as a comparison of the conventional drying process in this research. Based on the outcomes of this study, both drying methods improved the characteristics of the specimens.

Tumor grading of adult astrocytic glioma on MR imaging

Energy Technology Data Exchange (ETDEWEB)

Chang, Kee Hyun; Choi, Choong Gon; Han, Moon Hee; Lee, Seon Kyu [Seoul National University College of Medicine, Seoul (Korea, Republic of); Suh, Jung Ho [Yonsei University College of Medicine, Seoul (Korea, Republic of); Lee, Ho Kyu; Suh, Dae Chul [Ulsan University College of Medicine, Seoul (Korea, Republic of); Choi, Kyu Ho [Catholic University College of Medicine, Seoul (Korea, Republic of); Byun, Hong Sik [Korea Cancer Center Hospital, Seoul (Korea, Republic of); Choi, Woo Suk [Kyung Hee University College of Medicine, Seoul (Korea, Republic of)

1994-09-15

The purpose of this study is to determine predictive MR features for grading of astrocytic gliomas and to evaluate the accuracy of MR grading in these tumors. We retrospectively reviewed 135 cases of supratentorial astrocytic gliomas in adult (age > 15 years), all of which were proved by open biopsy. Two observers analysed MR images independently with criteria of margin, edema, mass effect, signal heterogeneity, necrosis, cyst formation, hemorrhage, tumor vascularity, enhancement degree, and enhancement size. The patterns of enhancement were categorized into no, homogeneous, heterogeneous, thin smooth rim, thin irregular rim, and thick irregular rim enhancement patterns. Observers finally diagnosed each case as one of low-grade astrocytoma, anaplastic astrocytoma or glioblastoma multiforme. Statistically significant MR features for grading of these tumors were revealed as necrosis (p < 0.001), edema (0.008), and signal heterogeneity (p < 0.025). When compared with histopathologic grading, MR graded correctly 76%- 77% of cases in two tired system(low-grade astrocytoma versus high-grade astrocytoma), but only 67%-69% of cases in three tiered system(low-grade astrocytoma, anaplastic astrocytoma, glioblastoma multiforme). No contrast enhancement was seen in 45% and 23% of low-grade astrocytoma and anaplastic astrocytoma respectively. Glioblastoma multiforme frequently showed thick irregular rim enhancement (57%), but no enhancement at all in 8%. We have concluded that necrosis and edema are significant predictive MR features for grading of supratentorial astrocytic gliomas in adult, and MR was correct in 76%-77% of cases for predicting pathologic grading astrocytomas in two tiered system.

Tumor grading of adult astrocytic glioma on MR imaging

International Nuclear Information System (INIS)

Chang, Kee Hyun; Choi, Choong Gon; Han, Moon Hee; Lee, Seon Kyu; Suh, Jung Ho; Lee, Ho Kyu; Suh, Dae Chul; Choi, Kyu Ho; Byun, Hong Sik; Choi, Woo Suk

1994-01-01

The purpose of this study is to determine predictive MR features for grading of astrocytic gliomas and to evaluate the accuracy of MR grading in these tumors. We retrospectively reviewed 135 cases of supratentorial astrocytic gliomas in adult (age > 15 years), all of which were proved by open biopsy. Two observers analysed MR images independently with criteria of margin, edema, mass effect, signal heterogeneity, necrosis, cyst formation, hemorrhage, tumor vascularity, enhancement degree, and enhancement size. The patterns of enhancement were categorized into no, homogeneous, heterogeneous, thin smooth rim, thin irregular rim, and thick irregular rim enhancement patterns. Observers finally diagnosed each case as one of low-grade astrocytoma, anaplastic astrocytoma or glioblastoma multiforme. Statistically significant MR features for grading of these tumors were revealed as necrosis (p < 0.001), edema (0.008), and signal heterogeneity (p < 0.025). When compared with histopathologic grading, MR graded correctly 76%- 77% of cases in two tired system(low-grade astrocytoma versus high-grade astrocytoma), but only 67%-69% of cases in three tiered system(low-grade astrocytoma, anaplastic astrocytoma, glioblastoma multiforme). No contrast enhancement was seen in 45% and 23% of low-grade astrocytoma and anaplastic astrocytoma respectively. Glioblastoma multiforme frequently showed thick irregular rim enhancement (57%), but no enhancement at all in 8%. We have concluded that necrosis and edema are significant predictive MR features for grading of supratentorial astrocytic gliomas in adult, and MR was correct in 76%-77% of cases for predicting pathologic grading astrocytomas in two tiered system

Role of cytologic grading in prognostication of invasive breast carcinoma

Directory of Open Access Journals (Sweden)

Khan Nazoora

2009-01-01

Full Text Available Background: Evaluation of cytologic features is indispensable in the preoperative diagnosis and grading of infiltrating ductal breast carcinoma (CA in fine-needle aspiration cytology (FNAC material and this method can also provide additional information regarding intrinsic features of the tumor as well as its prognosis. Aim: This study has been done to evaluate comparatively the cytologic and histomorphologic grading of infiltrating ductal carcinoma of breast with specific reference to lymph node metastasis and its role in prognostication. Materials and Methods: Forty three patients who underwent FNAC and mastectomy for infiltrating ductal carcinoma were cytologically and histologically graded (employing Robinson′s cytologic grading system and Elston′s modification of Bloom-Richardson system, respectively. Statistical analysis was done employing ′z′ test and c2 test to compare the two grading system and to examine the degree of correlation between the cytologic and histologic grades. Multiple regression analysis was done to assess the significance of every cytologic and histologic parameter. All 43 cases, graded cyto-histologically were also evaluated for presence or absence of metastasis to the regional lymph nodes employing c2 test. Results: With histologic grade taken as the standard, cytology was found to be fairly comparable, for grading breast carcinoma (overall sensitivity 89.1%, specificity 100%. Further comparison of the two grading systems by Z-test showed that difference between the cytologic and histologic grading was insignificant in all the three grade (p > 0.05. Of the six parameters studied, cell dissociation, nucleoli and chromatin pattern were the most influential features (p < 0.001. The statistically significant difference (p < 0.001 was found in incidences of axillary lymph node metastatic rate in three cytologic grades (15.4% in grade I vs. 83.3% in grade III as well. Conclusions: Apart from being simple and

Systemic low-grade inflammation in post-traumatic stress disorder: a systematic review

Directory of Open Access Journals (Sweden)

Speer K

2018-03-01

Full Text Available Kathryn Speer,1 Dominic Upton,2 Stuart Semple,1,3 Andrew McKune1–4 1Discipline of Sport and Exercise Science, Faculty of Health, University of Canberra, Canberra, ACT, Australia; 2Faculty of Health, University of Canberra, Canberra, ACT, Australia; 3Research Institute for Sport and Exercise, University of Canberra, Canberra, ACT, Australia; 4Discipline of Biokinetics, Exercise and Leisure Sciences, School of Health Sciences, University of KwaZulu Natal, Durban, South Africa Abstract: Studies examining post-traumatic stress disorder (PTSD have either emphasized a relationship between PTSD and a systemically pro-inflammatory state or identified a link between PTSD and chronic disease. The aim of this study was to evaluate the evidence for a relationship between individuals with PTSD and systemic low-grade inflammation that has been proposed to underlie chronic disease development in this population. The authors conducted a systematic review of the literature (January 2006 to April 2017 in accordance with the PRISMA statement in the following four databases: PubMed, MEDLINE, PsycINFO, and SPORTDiscus with Full Text. The search strategy was limited to articles published in peer-reviewed journals and to human studies. Nine studies measuring systemic inflammation and discussing its role in chronic disease development were selected for inclusion in this review. The association between markers of systemic inflammation and PTSD was evaluated by the measurement of a variety of systemic inflammatory markers including acute-phase proteins, complement proteins, pro- and anti-inflammatory cytokines, natural killer cells, and white blood cells. In general, systemic inflammatory biomarkers were elevated across the studies in the PTSD groups. There is evidence that PTSD is underpinned by the presence of a systemic low-grade inflammatory state. This inflammation may be the mechanism associated with increased risk for chronic disease in the PTSD population. From

Designing of Holistic Mathematic Education Model Based-"System Among" at Low Grade Elementary School

Science.gov (United States)

Hayati, R.; Fauzan, A.; Iswari, M.; Khaidir, A.

2018-04-01

The purpose of this study was to develop a model of Holistic Mathematics Education (HME) among systems based on low-grade primary school students so that students have a solid foundation when entering a higher behavior. This type of research is desaign research developed by Plomp to have three stages, namely the preliminary research, development or prototyping phase, and assessement Phase. This research resulted in a model Holistic Mathematics Education (HME) -based system is among the primary school students low grade consists of 10 stages, namely 1) Recap through the neighborhood, 2) Discussion groups by exploiting the environment, 3) Demonstration Group, 4) Exercise individuals, 5) mathematical modeling, 6) Demonstration of individuals, 7) Reflections, 8) impressions and messages, and giving meaning, 9) Celebrations and 10) A thorough assessment. Furthermore, this model also produces 7 important components that should be developed teacher, namely 1) constructivism, 2) the nature of nature, 3) independence, 4) parable, 5) inquiry, 6) cooperation, and 7) strengthening. This model will produce a model in the form of books, student books and teacher's guide book as a support system that can help users in its application.

Allergic Sensitization at School Age is a Systemic Low-grade Inflammatory Disorder

DEFF Research Database (Denmark)

Chawes, B. L.; Stokholm, J.; Schoos, A.-M. M.

2017-01-01

allergic sensitization. Methods High-sensitivity C-reactive protein (hs-CRP), interleukin-1β (IL-1β), IL-6, tumor necrosis factor-α (TNF-α), and chemokine (C-X-C motif) ligand 8 (CXCL8) were measured in plasma at age 6 months (N = 214) and 7 years (N = 277) in children from the Copenhagen Prospective...... sensitization in school-aged children suggesting systemic low-grade inflammation as a phenotypic characteristic of this early-onset NCD....

Potential for yield improvement in combined rip-first and crosscut-first rough mill processing

Science.gov (United States)

Ed Thomas; Urs Buehlmann

2016-01-01

Traditionally, lumber cutting systems in rough mills have either first ripped lumber into wide strips and then crosscut the resulting strips into component lengths (rip-first), or first crosscut the lumber into component lengths, then ripped the segments to the required widths (crosscut-first). Each method has its advantages and disadvantages. Crosscut-first typically...

Computer Vision Systems for Hardwood Logs and Lumber

Science.gov (United States)

Philip A. Araman; Tai-Hoon Cho; D. Zhu; R. Conners

1991-01-01

Computer vision systems being developed at Virginia Tech University with the support and cooperation from the U.S. Forest Service are presented. Researchers at Michigan State University, West Virginia University, and Mississippi State University are also members of the research team working on various parts of this research. Our goals are to help U.S. hardwood...

Meat standards and grading: a world view.

Science.gov (United States)

Polkinghorne, R J; Thompson, J M

2010-09-01

This paper addresses the principles relating to meat standards and grading of beef and advances the concept that potential exists to achieve significant desirable change from adopting more consumer focused systems within accurate value-based payment frameworks. The paper uses the definitions that classification is a set of descriptive terms describing features of the carcass that are useful to those involved in the trading of carcasses, whereas grading is the placing of different values on carcasses for pricing purposes, depending on the market and requirements of traders. A third definition is consumer grading, which refers to grading systems that seek to define or predict consumer satisfaction with a cooked meal. The development of carcass classification and grading schemes evolved from a necessity to describe the carcass using standard terms to facilitate trading. The growth in world trade of meat and meat products and the transition from trading carcasses to marketing individual meal portions raises the need for an international language that can service contemporary needs. This has in part been addressed by the United Nations promoting standard languages on carcasses, cuts, trim levels and cutting lines. Currently no standards exist for describing consumer satisfaction. Recent Meat Standards Australia (MSA) research in Australia, Korea, Ireland, USA, Japan and South Africa showed that consumers across diverse cultures and nationalities have a remarkably similar view of beef eating quality, which could be used to underpin an international language on palatability. Consumer research on the willingness to pay for eating quality shows that consumers will pay higher prices for better eating quality grades and generally this was not affected by demographic or meat preference traits of the consumer. In Australia the MSA eating quality grading system has generated substantial premiums to retailers, wholesalers and to the producer. Future grading schemes which measure

Grade Point Average System of Assessment: the Implementation Peculiarities in Russia

Directory of Open Access Journals (Sweden)

B. A. Sazonov

2012-01-01

Full Text Available The paper analyzes the specificity, as well as flaws and faults of implementing the Grade Point Average (GPA system of students’ personal assessment in Russian higher schools. Nowadays, the above system is regarded as the basic functional element of educational process organization at the world’s leading universities. The author summarizes the foreign experience and demonstrates the advantages of the GPA system in comparison with the traditional domestic scale of assessment: full records of student’s assessment, objectivity, activation of responsibility for the results achieved, and self-control motivation. The standard GPA model is demonstrated, its application systemizing both the Russian and European requirements to the higher school graduates. The author suggests his own version of the assessment scale estimating and comparing the quality of education in Russian universities and worldwide. The research findings can be of interest to the specialists in the sphere of quality measurement and educational management. 

The Effects of Framing Grades on Student Learning and Preferences

Science.gov (United States)

Bies-Hernandez, Nicole J.

2012-01-01

Two experiments examined whether framing effects, in terms of losses and gains, can be extended to student learning and grading preferences. In Experiment 1, participants rated psychology course syllabi to investigate preferences for differently framed grading systems: a loss versus gain grading system. The results showed a clear framing effect…

Processing of low-grade uranium ores

International Nuclear Information System (INIS)

Michel, P.

1975-01-01

Four types of low grade ores are studied. Low grade ores which must be extracted because they are enclosed in a normal grade deposit. Heap leaching is the processing method which is largely used. It allows to obtain solutions or preconcentrates which may be delivered at the nearest plant. Normal grade ores contained in a low amplitude deposit which can be processed using leaching as far as the operation does not need any large expensive equipment. Medium grade ores in medium amplitude deposits to which a simplified conventional process can be applied using fast heap leaching. Low grade ores in large deposits. The processing possibilities leading to use in place leaching are explained. The operating conditions of the method are studied (leaching agent, preparation of the ore deposit to obtain a good tightness with regard to the hydrological system and to have a good contact between ore and reagent) [fr

Potential Dimension Yields From Direct Processing

Science.gov (United States)

Wenjie Lin; D. Earl Kline; Philip A. Araman

1994-01-01

As the price of timber increases and environmental leigslation limits harvestable log volumes, the process of converting logs directly into dimension parts needs further exploration. Direct processing converts logs directly into rough green dimension parts without the intermediate steps of lumber manufacturing, grading, trading, shipping and drying. A major attraction...

Exploratory radio-frequency/vacuum drying of three B.C. coastal softwoods

International Nuclear Information System (INIS)

Avramidis, S.; Zwick, R.L.

1992-01-01

Five exploratory drying runs were carried out in a commercial size (23 m3) radio-frequency/vacuum (RF/V) kiln. The species investigated were Pacific Coast hemlock, Douglas-fir, and western redcedar of different sizes and grades. Evaluation of the dried lumber showed that the three species can be dried in very short times with a low amount of degrade with the exception of clear cedar, which exhibited severe internal honeycombing; indicating the need to develop proper kiln schedules for this drying process. The thermodynamic and sensitivity analyses performed showed that above certain efficiency levels, RF/V drying is economical and fast. This finding was particularly true with lumber thicknesses over 8 cm

Food grade microemulsion systems: canola oil/lecithin:n-propanol/water.

Science.gov (United States)

Abbasi, Soleiman; Radi, Mohsen

2016-03-01

In this study, the capability of a natural surfactant, lecithin, and the influence of ionic strength, pH, and temperature on some properties of a food grade microemulsion system were evaluated. For this purpose, the pseudoternary phase diagrams of canola oil/lecithin:n-propanol/water microemulsions in the presence of different salts (NaCl and CaCl2), ionic strengths, pHs, and temperatures were constructed. Our findings showed that the presence of salts slightly increased the W/O areas on the phase diagrams, whereas pH variation was not effective on the microemulsion formation. The expansion of microemulsion areas with temperature indicated the greater triglycerides solubilization capacity of lecithin based microemulsions at higher temperatures. These findings revealed the efficiency of lecithin-based microemulsion system for solubilization of triglycerides which can potentially be used for extraction of edible vegetable oils particularly canola oil. Copyright © 2015 Elsevier Ltd. All rights reserved.

Developing seventh grade students' systems thinking skills in the context of the human circulatory system.

Science.gov (United States)

Raved, Lena; Yarden, Anat

2014-01-01

Developing systems thinking skills in school can provide useful tools to deal with a vast amount of medical and health information that may help learners in decision making in their future lives as citizen. Thus, there is a need to develop effective tools that will allow learners to analyze biological systems and organize their knowledge. Here, we examine junior high school students' systems thinking skills in the context of the human circulatory system. A model was formulated for developing teaching and learning materials and for characterizing students' systems thinking skills. Specifically, we asked whether seventh grade students, who studied about the human circulatory system, acquired systems thinking skills, and what are the characteristics of those skills? Concept maps were used to characterize students' systems thinking components and examine possible changes in the students' knowledge structure. These maps were composed by the students before and following the learning process. The study findings indicate a significant improvement in the students' ability to recognize the system components and the processes that occur within the system, as well as the relationships between different levels of organization of the system, following the learning process. Thus, following learning students were able to organize the systems' components and its processes within a framework of relationships, namely the students' systems thinking skills were improved in the course of learning using the teaching and learning materials.

Automated Grading System for Evaluation of Superficial Punctate Keratitis Associated With Dry Eye.

Science.gov (United States)

Rodriguez, John D; Lane, Keith J; Ousler, George W; Angjeli, Endri; Smith, Lisa M; Abelson, Mark B

2015-04-01

To develop an automated method of grading fluorescein staining that accurately reproduces the clinical grading system currently in use. From the slit lamp photograph of the fluorescein-stained cornea, the region of interest was selected and punctate dot number calculated using software developed with the OpenCV computer vision library. Images (n = 229) were then divided into six incremental severity categories based on computed scores. The final selection of 54 photographs represented the full range of scores: nine images from each of six categories. These were then evaluated by three investigators using a clinical 0 to 4 corneal staining scale. Pearson correlations were calculated to compare investigator scores, and mean investigator and automated scores. Lin's Concordance Correlation Coefficients (CCC) and Bland-Altman plots were used to assess agreement between methods and between investigators. Pearson's correlation between investigators was 0.914; mean CCC between investigators was 0.882. Bland-Altman analysis indicated that scores assessed by investigator 3 were significantly higher than those of investigators 1 and 2 (paired t-test). The predicted grade was calculated to be: Gpred = 1.48log(Ndots) - 0.206. The two-point Pearson's correlation coefficient between the methods was 0.927 (P < 0.0001). The CCC between predicted automated score Gpred and mean investigator score was 0.929, 95% confidence interval (0.884-0.957). Bland-Altman analysis did not indicate bias. The difference in SD between clinical and automated methods was 0.398. An objective, automated analysis of corneal staining provides a quality assurance tool to be used to substantiate clinical grading of key corneal staining endpoints in multicentered clinical trials of dry eye.

Effective use of e-grading in the dental simulation clinic.

Science.gov (United States)

Morrow, Jay A; Pulido, M Teresa; Smith, P Bradford; McDaniel, Thomas F; Willcox, Austin B

2014-06-01

The purpose of this article is to describe the development and implementation of a grading software system, accessible from any platform, that engages today's generation of students and replaces paper grading. Set up at one U.S. dental school in an all-access, anytime (24/7) web-based program accessed through tablets, the software allows for a comparison between students' self-grading and instructor grading. This comparison facilitates student-faculty interaction, promoting discussion and student learning. The software can also be used for practical examination grading in which blinded grading between instructors is possible. The data gathered can produce descriptive reports students can draw upon to encourage self-learning and guided learning, propelling students to a better understanding of critical principles as they progress through multiple psychomotor skill sets. Other reports generated by the software allow for instructor calibration, exporting of grades directly into the university grading report system, and visual analysis of trends within each class. In a post-course survey, students (56 percent response rate) and faculty (79 percent response rate) agreed that the electronic grading was more efficient and allowed more time for faculty-student interaction than the previous grading system, thus creating an environment more conducive to learning. Overall, the software has improved students' perception of enhanced kinetic skills, while facilitating administration of preclinical projects and practical examinations.

Web-Based Problem-Solving Assignment and Grading System

Science.gov (United States)

Brereton, Giles; Rosenberg, Ronald

2014-11-01

In engineering courses with very specific learning objectives, such as fluid mechanics and thermodynamics, it is conventional to reinforce concepts and principles with problem-solving assignments and to measure success in problem solving as an indicator of student achievement. While the modern-day ease of copying and searching for online solutions can undermine the value of traditional assignments, web-based technologies also provide opportunities to generate individualized well-posed problems with an infinite number of different combinations of initial/final/boundary conditions, so that the probability of any two students being assigned identical problems in a course is vanishingly small. Such problems can be designed and programmed to be: single or multiple-step, self-grading, allow students single or multiple attempts; provide feedback when incorrect; selectable according to difficulty; incorporated within gaming packages; etc. In this talk, we discuss the use of a homework/exam generating program of this kind in a single-semester course, within a web-based client-server system that ensures secure operation.

Grading Homework to Emphasize Problem-Solving Process Skills

Science.gov (United States)

Harper, Kathleen A.

2012-01-01

This article describes a grading approach that encourages students to employ particular problem-solving skills. Some strengths of this method, called "process-based grading," are that it is easy to implement, requires minimal time to grade, and can be used in conjunction with either an online homework delivery system or paper-based homework.

Fatty degeneration of the rotator cuff muscles on pre- and postoperative CT arthrography (CTA): is the Goutallier grading system reliable?

Energy Technology Data Exchange (ETDEWEB)

Lee, Eugene; Choi, Jung-Ah; Kang, Heung Sik [Seoul National University Bundang Hospital, Department of Radiology, Seongnam-si, Gyeongi-do (Korea, Republic of); Seoul National University College of Medicine, Department of Radiology, 28 Yeongon-dong, Chongno-gu, Seoul (Korea, Republic of); Oh, Joo Han [Seoul National University Bundang Hospital, Department of Orthopedic Surgery, Seongnam-si, Gyeongi-do (Korea, Republic of); Ahn, Soyeon [Seoul National University Bundang Hospital, Medical Research Collaborating Center, Seongnam-si, Gyeongi-do (Korea, Republic of); Hong, Sung Hwan [Seoul National University College of Medicine, Department of Radiology, 28 Yeongon-dong, Chongno-gu, Seoul (Korea, Republic of); Chai, Jee Won [SMG-SNU Boramae Medical Center, Department of Radiology, 425 Shindaebang-dong, Dongjak-gu, Seoul (Korea, Republic of)

2013-09-15

To retrospectively evaluate fatty degeneration (FD) of rotator cuff muscles on CTA using Goutallier's grading system and quantitative measurements with comparison between pre- and postoperative states. IRB approval was obtained for this study. Two radiologists independently reviewed pre- and postoperative CTAs of 43 patients (24 males and 19 females, mean age, 58.1 years) with 46 shoulders confirmed as full-thickness tears with random distribution. FD of supraspinatus, infraspinatus/teres minor, and subscapularis was assessed using Goutallier's system and by quantitative measurements of Hounsfield units (HUs) on sagittal images. Changes in FD grades and HUs were compared between pre- and postoperative CTAs and analyzed with respect to preoperative tear size and postoperative cuff integrity. The correlations between qualitative grades and quantitative measurements and their inter-observer reliabilities were also assessed. There was statistically significant correlation between FD grades and HU measurements of all muscles on pre- and postoperative CTA (p < 0.05). Inter-observer reliability of fatty degeneration grades were excellent to substantial on both pre- and postoperative CTA in supraspinatus (0.8685 and 0.8535) and subscapularis muscles (0.7777 and 0.7972), but fair in infraspinatus/teres minor muscles (0.5791 and 0.5740); however, quantitative Hounsfield units measurements showed excellent reliability for all muscles (ICC: 0.7950 and 0.9346 for SST, 0.7922 and 0.8492 for SSC, and 0.9254 and 0.9052 for IST/TM). No muscle showed improvement of fatty degeneration after surgical repair on qualitative and quantitative assessments; there was no difference in changes of fatty degeneration after surgical repair according to preoperative tear size and post-operative cuff integrity (p > 0.05). The average dose-length product (DLP, mGy . cm) was 365.2 mGy . cm (range, 323.8-417.2 mGy . cm) and estimated average effective dose was 5.1 mSv. Goutallier grades

Enhancing On-Task Behavior in Fourth-Grade Students Using a Modified Color Wheel System

Science.gov (United States)

Blondin, Carolyn; Skinner, Christopher; Parkhurst, John; Wood, Allison; Snyder, Jamie

2012-01-01

The authors used a withdrawal design to evaluate the effects of a modified Color Wheel System (M-CWS) on the on-task behavior of 7 students enrolled in the 4th grade. Standard CWS procedures were modified to include a 4th set of rules designed to set behavioral expectation for cooperative learning activities. Mean data showed that immediately…

Developing Seventh Grade Students’ Systems Thinking Skills in the Context of the Human Circulatory System

Science.gov (United States)

Raved, Lena; Yarden, Anat

2014-01-01

Developing systems thinking skills in school can provide useful tools to deal with a vast amount of medical and health information that may help learners in decision making in their future lives as citizen. Thus, there is a need to develop effective tools that will allow learners to analyze biological systems and organize their knowledge. Here, we examine junior high school students’ systems thinking skills in the context of the human circulatory system. A model was formulated for developing teaching and learning materials and for characterizing students’ systems thinking skills. Specifically, we asked whether seventh grade students, who studied about the human circulatory system, acquired systems thinking skills, and what are the characteristics of those skills? Concept maps were used to characterize students’ systems thinking components and examine possible changes in the students’ knowledge structure. These maps were composed by the students before and following the learning process. The study findings indicate a significant improvement in the students’ ability to recognize the system components and the processes that occur within the system, as well as the relationships between different levels of organization of the system, following the learning process. Thus, following learning students were able to organize the systems’ components and its processes within a framework of relationships, namely the students’ systems thinking skills were improved in the course of learning using the teaching and learning materials. PMID:25520948

Distributed Road Grade Estimation for Heavy Duty Vehicles

Energy Technology Data Exchange (ETDEWEB)

Sahlholm, Per

2011-07-01

An increasing need for goods and passenger transportation drives continued worldwide growth in traffic. As traffic increases environmental concerns, traffic safety, and cost efficiency become ever more important. Advancements in microelectronics open the possibility to address these issues through new advanced driver assistance systems. Applications such as predictive cruise control, automated gearbox control, predictive front lighting control, and hybrid vehicle state-of-charge control decrease the energy consumption of vehicles and increase the safety. These control systems can benefit significantly from preview road grade information. This information is currently obtained using specialized survey vehicles, and is not widely available. This thesis proposes new methods to obtain road grade information using on-board sensors. The task of creating road grade maps is addressed by the proposal of a framework where vehicles using a road network collect the necessary data for estimating the road grade. The estimation can then be carried out locally in the vehicle, or in the presence of a communication link to the infrastructure, centrally. In either case the accuracy of the map increases over time, and costly road surveys can be avoided. This thesis presents a new distributed method for creating accurate road grade maps for vehicle control applications. Standard heavy duty vehicles in normal operation are used to collect measurements. Estimates from multiple passes along a road segment are merged to form a road grade map, which improves each time a vehicle retraces a route. The design and implementation of the road grade estimator are described, and the performance is experimentally evaluated using real vehicles. Three different grade estimation methods, based on different assumption on the road grade signal, are proposed and compared. They all use data from sensors that are standard equipment in heavy duty vehicles. Measurements of the vehicle speed and the engine

Impacts of construction markets on firm performance and behaviors in the secondary woodworking industry, 2010-2013

Science.gov (United States)

Matthew S. Bumgardner; Urs Buehlmann; Albert T. Schuler; Karen M. Koenig

2014-01-01

Despite the severe downturn in the housing market that began in 2007, construction-related uses collectively remain the largest source of demand for appearance-grade hardwood lumber in the United States. Therefore, industry practitioners and researchers alike maintain an interest in housing and construction trends. This study investigated market conditions from the...

Moisture meter calibration for untreated and ACQ-treated southern yellow pine plywood

Science.gov (United States)

Samuel V. Glass; Charles G. Carll

2009-01-01

Conductance moisture meter readings using stainless steel screws as electrodes were compared with gravimetric moisture content for 1) southern yellow pine (SYP) dimensioned lumber, 2) untreated (underlayment grade) SYP plywood, and 3) SYP plywood treated with alkaline copper quaternary. Meter readings were taken with the meter set to the manufacturer-provided species...

Reliability formulation for the strength and fire endurance of glued-laminated beams

Science.gov (United States)

D. A. Bender

A model was developed for predicting the statistical distribution of glued-laminated beam strength and stiffness under normal temperature conditions using available long span modulus of elasticity data, end joint tension test data, and tensile strength data for laminating-grade lumber. The beam strength model predictions compared favorably with test data for glued-...

Development of Necessary Technology for localizing of Nuclear Safety Grade I and C System

International Nuclear Information System (INIS)

Kwon, Kee Choon; Jang, Tong Il; Kim, Jung Tack

2010-08-01

Through KNICS and Nu-Tech 2012, a MMIS(Man-Machine Interface System) package for nuclear plants was localized and is expected to be applied to SUN 1,2 plants. This study is aimed to support the application of the MMIS package including the following technologies that meet strengthened regulation requirements and enhanced utility's performance requirements to nuclear plants. - Dedication to safety-grade computers and real time operating systems - The broadband communication network for safety information - Application of the automatic test for safety systems - Application of programmable logic controllers to nuclear plants - Development strategy for an integrated SW development tool for control device

Food-grade host/vector expression system for Lactobacillus casei based on complementation of plasmid-associated phospho-beta-galactosidase gene lacG.

Science.gov (United States)

Takala, T M; Saris, P E J; Tynkkynen, S S H

2003-01-01

A new food-grade host/vector system for Lactobacillus casei based on lactose selection was constructed. The wild-type non-starter host Lb. casei strain E utilizes lactose via a plasmid-encoded phosphotransferase system. For food-grade cloning, a stable lactose-deficient mutant was constructed by deleting a 141-bp fragment from the phospho-beta-galactosidase gene lacG via gene replacement. The deletion resulted in an inactive phospho-beta-galactosidase enzyme with an internal in-frame deletion of 47 amino acids. A complementation plasmid was constructed containing a replicon from Lactococcus lactis, the lacG gene from Lb. casei, and the constitutive promoter of pepR for lacG expression from Lb. rhamnosus. The expression of the lacG gene from the resulting food-grade plasmid pLEB600 restored the ability of the lactose-negative mutant strain to grow on lactose to the wild-type level. The vector pLEB600 was used for expression of the proline iminopeptidase gene pepI from Lb. helveticus in Lb. casei. The results show that the food-grade expression system reported in this paper can be used for expression of foreign genes in Lb. casei.

A parametric study of a humidification dehumidification (HDH) desalination system using low grade heat sources

International Nuclear Information System (INIS)

He, W.F.; Han, D.; Yue, C.; Pu, W.H.

2015-01-01

Highlights: • The HDH desalination system coupling with the waste heat plate LGHC is proposed. • Performance of the desalination system and the plate LGHC is presented. • Influence from the operation pressure on the system performance is investigated. • Gained investment ratio is proposed to characterize the desalination system consumption. - Abstract: Humidification dehumidification (HDH) desalination system is applicable to recover the low grade heat source to heat the seawater before the humidifier. In the paper, plate heat exchangers are integrated to recover the waste heat from the exhaust in the water heated closed air open water (CAOW) HDH desalination system. The performance of the HDH desalination system as well as the plate type of low grade heat collector (LGHC) is investigated at different operation pressures. Gain investment ratio (GIR) is proposed and defined to depict the overall consumption of the whole system. The simulation results show that the modified heat capacity ratio of the dehumidifier (HCRd) is vital for the performance of the HDH desalination system as well as the plate LGHC with a top value of gain output ratio (GOR) at the balance point, HCRd = 1, and the maximum GOR, GOR = 2.44, results from the raised pressure of p = 0.15 MPa. Furthermore, taking the cost for the heat transfer surface area of the LGHC and the air and seawater pipes into consideration, it is revealed that the conditions, HCRd > 1, are more economical due to the increase of GIR, which indicates the profit of unit consumption is more significant.

Acquiring research-grade ERPs on a shoestring budget: A comparison of a modified Emotiv and commercial SynAmps EEG system.

Science.gov (United States)

Barham, Michael P; Clark, Gillian M; Hayden, Melissa J; Enticott, Peter G; Conduit, Russell; Lum, Jarrad A G

2017-09-01

This study compared the performance of a low-cost wireless EEG system to a research-grade EEG system on an auditory oddball task designed to elicit N200 and P300 ERP components. Participants were 15 healthy adults (6 female) aged between 19 and 40 (M = 28.56; SD = 6.38). An auditory oddball task was presented comprising 1,200 presentations of a standard tone interspersed by 300 trials comprising a deviant tone. EEG was simultaneously recorded from a modified Emotiv EPOC and a NeuroScan SynAmps RT EEG system. The modifications made to the Emotiv system included attaching research grade electrodes to the Bluetooth transmitter. Additional modifications enabled the Emotiv system to connect to a portable impedance meter. The cost of these modifications and portable impedance meter approached the purchase value of the Emotiv system. Preliminary analyses revealed significantly more trials were rejected from data acquired by the modified Emotiv compared to the SynAmps system. However, the ERP waveforms captured by the Emotiv system were found to be highly similar to the corresponding waveform from the SynAmps system. The latency and peak amplitude of N200 and P300 components were also found to be similar between systems. Overall, the results indicate that, in the context of an oddball task, the ERP acquired by a low-cost wireless EEG system can be of comparable quality to research-grade EEG acquisition equipment. © 2017 Society for Psychophysiological Research.

7 CFR 810.2204 - Grades and grade requirements for wheat.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Grades and grade requirements for wheat. 810.2204... OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Wheat Principles Governing the Application of Standards § 810.2204 Grades and grade requirements for wheat. (a) Grades and grade requirements...

Neuropathic pain. Redefinition and a grading system for clinical and research purposes

DEFF Research Database (Denmark)

Treede, R.-D.; Jensen, Troels Staehelin; Campbell, J.N.

2008-01-01

potentially tissue-damaging stimuli. Pain may also arise by activity generated within the nervous system without adequate stimulation of its peripheral sensory endings. For this type of pain, the International Association for the Study of Pain introduced the term neuropathic pain, defined as "pai...... evidence from a neurologic examination. This grading system is proposed for clinical and research purposes....... initiated or caused by a primary lesion or dysfunction in the nervous system." While this definition has been useful in distinguishing some characteristics of neuropathic and nociceptive types of pain, it lacks defined boundaries. Since the sensitivity of the nociceptive system is modulated by its adequate...... activation (e.g., by central sensitization), it has been difficult to distinguish neuropathic dysfunction from physiologic neuroplasticity. We present a more precise definition developed by a group of experts from the neurologic and pain community: pain arising as a direct consequence of a lesion or disease...

Job safety analysis and hazard identification for work accident prevention in para rubber wood sawmills in southern Thailand.

Science.gov (United States)

Thepaksorn, Phayong; Thongjerm, Supawan; Incharoen, Salee; Siriwong, Wattasit; Harada, Kouji; Koizumi, Akio

2017-11-25

We utilized job safety analysis (JSA) and hazard identification for work accident prevention in Para rubber wood sawmills, which aimed to investigate occupational health risk exposures and assess the health hazards at sawmills in the Trang Province, located in southern Thailand. We conducted a cross-sectional study which included a walk-through survey, JSA, occupational risk assessment, and environmental samplings from March through September 2015 at four Para rubber wood sawmills. We identified potential occupational safety and health hazards associated with six main processes, including: 1) logging and cutting, 2) sawing the lumber into sheets, 3) planing and re-arranging, 4) vacuuming and wood preservation, 5) drying and planks re-arranging, and 6) grading, packing, and storing. Working in sawmills was associated with high risk of wood dust and noise exposure, occupational accidents injuring hands and feet, chemicals and fungicide exposure, and injury due to poor ergonomics or repetitive work. Several high-risk areas were identified from JSA and hazard identification of the working processes, especially high wood dust and noise exposure when sawing lumber into sheets and risk of occupational accidents of the hands and feet when struck by lumber. All workers were strongly recommended to use personal protective equipment in any working processes. Exposures should be controlled using local ventilation systems and reducing noise transmission. We recommend that the results from the risk assessment performed in this study be used to create an action plan for reducing occupational health hazards in Para rubber sawmills.

Computer-Aided Grading of Gliomas Combining Automatic Segmentation and Radiomics

Directory of Open Access Journals (Sweden)

Wei Chen

2018-01-01

Full Text Available Gliomas are the most common primary brain tumors, and the objective grading is of great importance for treatment. This paper presents an automatic computer-aided diagnosis of gliomas that combines automatic segmentation and radiomics, which can improve the diagnostic ability. The MRI data containing 220 high-grade gliomas and 54 low-grade gliomas are used to evaluate our system. A multiscale 3D convolutional neural network is trained to segment whole tumor regions. A wide range of radiomic features including first-order features, shape features, and texture features is extracted. By using support vector machines with recursive feature elimination for feature selection, a CAD system that has an extreme gradient boosting classifier with a 5-fold cross-validation is constructed for the grading of gliomas. Our CAD system is highly effective for the grading of gliomas with an accuracy of 91.27%, a weighted macroprecision of 91.27%, a weighted macrorecall of 91.27%, and a weighted macro-F1 score of 90.64%. This demonstrates that the proposed CAD system can assist radiologists for high accurate grading of gliomas and has the potential for clinical applications.

Massachusetts Early Warning Indicator System (EWIS). "Technical Descriptions of Risk Model Development": Middle and High School Age Groupings (Grades 7-12)

Science.gov (United States)

Massachusetts Department of Elementary and Secondary Education, 2013

2013-01-01

The Massachusetts Department of Elementary and Secondary Education (Department) created the grades 1-12 Early Warning Indicator System (EWIS) in response to district interest in the Early Warning Indicator Index (EWII) that the Department previously created for rising grade 9 students. Districts shared that the EWII data were helpful, but also…

Massachusetts Early Warning Indicator System (EWIS). "Technical Descriptions of Risk Model Development": Early and Late Elementary Age Groupings (Grades 1-6)

Science.gov (United States)

Massachusetts Department of Elementary and Secondary Education, 2013

2013-01-01

The Massachusetts Department of Elementary and Secondary Education (Department) created the grades 1-12 Early Warning Indicator System (EWIS) in response to district interest in the Early Warning Indicator Index (EWII) that the Department previously created for rising grade 9 students. Districts shared that the EWII data were helpful, but also…

Assessment of a Chemotherapy Response Score (CRS) System for Tubo-Ovarian High-Grade Serous Carcinoma (HGSC)

DEFF Research Database (Denmark)

Ditzel, Helena M; Strickland, Kyle C; Meserve, Emily E

2018-01-01

A chemotherapy response score (CRS) system was recently described to assess the histopathologic response and prognosis of patients with tubo-ovarian high-grade serous carcinoma (HGSC) receiving neoadjuvant chemotherapy. The current study was performed as an independent assessment of this CRS syst...

Produce yellow-poplar furniture dimension at minimum cost by using YELLOPOP

Science.gov (United States)

David G. Marten; David G. Marten

1986-01-01

Describes a computer program called YELLOPOP that determines the least-cost combination of lumber grades required to produce a given cutting order of furniture dimension parts. If the least-cost mix is not available, YELLOPOP can be used to determine the next best alternative. The steps involved in using the program are also described.

Validation of an internal hardwood log defect prediction model

Science.gov (United States)

R. Edward. Thomas

2011-01-01

The type, size, and location of internal defects dictate the grade and value of lumber sawn from hardwood logs. However, acquiring internal defect knowledge with x-ray/computed-tomography or magnetic-resonance imaging technology can be expensive both in time and cost. An alternative approach uses prediction models based on correlations among external defect indicators...

Bruxism defined and graded: an international consensus

NARCIS (Netherlands)

Lobbezoo, F.; Ahlberg, J.; Glaros, A.G.; Kato, T.; Koyano, K.; Lavigne, G.J.; de Leeuw, R.; Manfredini, D.; Svensson, P.; Winocur, E.

2013-01-01

To date, there is no consensus about the definition and diagnostic grading of bruxism. A written consensus discussion was held among an international group of bruxism experts as to formulate a definition of bruxism and to suggest a grading system for its operationalisation. The expert group defined

AN APPLE GRADING SYSTEM ACCORDING TO EUROPEAN FRUIT QUALITY STANDARDS USING GABOR FILTER AND ARTIFICIAL NEURAL NETWORKS

Directory of Open Access Journals (Sweden)

KEYVAN ASEFPOUR VAKILIAN

2016-04-01

Full Text Available With the advent of applications of machine learning methods in food engineering in recent decades, several intelligent methods have been introduced in fruit grading technology. In this study, an apple grading system is presented using image’s textural features extraction and artificial intelligence. The objective of this study was to simplify the use of Gabor filter in classification of two varieties of apple fruits (Golden Delicious and Red Delicious in four categories according to the European fruit quality standards. Using this filter, neural network classifier was trained for four category grading of the fruits. Two textural parameters were extracted from each obtained image: mean and variance of energy values of obtained image representing image’s luminous intensity and contrast, respectively. Experimental results indicated that the training of extracted features of about 350 fruits enabled the network to classify the test samples with appropriate accuracy. Compared to the state-of-the-art, the proposed grading categories (‘Extra’, ‘Type 1’, ‘Type 2’ and ‘Rejected’ classes achieved acceptable recognition rates of about 89 % and 92 % overall accuracy for Golden Delicious and Red Delicious varieties, respectively. These experimental results show the appropriate application of proposed method in fast grading of apple fruits. Furthermore, proposed feature extraction and network training methods can be used efficiently in online applications.

The effect of various grading scales on student grade point averages.

Science.gov (United States)

Barnes, Kelli D; Buring, Shauna M

2012-04-10

To investigate changes in and the impact of grading scales from 2005 to 2010 and explore pharmacy faculty and student perceptions of whole-letter and plus/minus grading scales on cumulative grade point averages (GPAs) in required courses. Grading scales used in 2010 at the University of Cincinnati College of Pharmacy were retrospectively identified and compared to those used in 2005. Mean GPA was calculated using a whole-letter grading scale and a plus/minus grading scale to determine the impact of scales on GPA. Faculty members and students were surveyed regarding their perceptions of plus/minus grading. Nine unique grading scales were used throughout the curriculum, including plus/minus (64%) and whole-letter (21%) grading scales. From 2005 to 2010 there was transition from use of predominantly whole-letter scales to plus/minus grading scales. The type of grading scale used did not affect the mean cumulative GPA. Students preferred use of a plus-only grading scale while faculty members preferred use of a plus/minus grading scale. The transition from whole-letter grading to plus/minus grading in courses from 2005 to 2010 reflects pharmacy faculty members' perception that plus/minus grading allows for better differentiation between students' performances.

MRI differentiation of low-grade from high-grade appendicular chondrosarcoma

International Nuclear Information System (INIS)

Douis, Hassan; Singh, Leanne; Saifuddin, Asif

2014-01-01

To identify magnetic resonance imaging (MRI) features which differentiate low-grade chondral lesions (atypical cartilaginous tumours/grade 1 chondrosarcoma) from high-grade chondrosarcomas (grade 2, grade 3 and dedifferentiated chondrosarcoma) of the major long bones. We identified all patients treated for central atypical cartilaginous tumours and central chondrosarcoma of major long bones (humerus, femur, tibia) over a 13-year period. The MRI studies were assessed for the following features: bone marrow oedema, soft tissue oedema, bone expansion, cortical thickening, cortical destruction, active periostitis, soft tissue mass and tumour length. The MRI-features were compared with the histopathological tumour grading using univariate, multivariate logistic regression and receiver operating characteristic curve (ROC) analyses. One hundred and seventy-nine tumours were included in this retrospective study. There were 28 atypical cartilaginous tumours, 79 grade 1 chondrosarcomas, 36 grade 2 chondrosarcomas, 13 grade 3 chondrosarcomas and 23 dedifferentiated chondrosarcomas. Multivariate analysis demonstrated that bone expansion (P = 0.001), active periostitis (P = 0.001), soft tissue mass (P < 0.001) and tumour length (P < 0.001) were statistically significant differentiating factors between low-grade and high-grade chondral lesions with an area under the ROC curve of 0.956. On MRI, bone expansion, active periostitis, soft tissue mass and tumour length can reliably differentiate high-grade chondrosarcomas from low-grade chondral lesions of the major long bones. (orig.)

MRI differentiation of low-grade from high-grade appendicular chondrosarcoma

Energy Technology Data Exchange (ETDEWEB)

Douis, Hassan; Singh, Leanne; Saifuddin, Asif [The Royal National Orthopaedic Hospital NHS Trust, Department of Radiology, Stanmore, Middlesex (United Kingdom)

2014-01-15

To identify magnetic resonance imaging (MRI) features which differentiate low-grade chondral lesions (atypical cartilaginous tumours/grade 1 chondrosarcoma) from high-grade chondrosarcomas (grade 2, grade 3 and dedifferentiated chondrosarcoma) of the major long bones. We identified all patients treated for central atypical cartilaginous tumours and central chondrosarcoma of major long bones (humerus, femur, tibia) over a 13-year period. The MRI studies were assessed for the following features: bone marrow oedema, soft tissue oedema, bone expansion, cortical thickening, cortical destruction, active periostitis, soft tissue mass and tumour length. The MRI-features were compared with the histopathological tumour grading using univariate, multivariate logistic regression and receiver operating characteristic curve (ROC) analyses. One hundred and seventy-nine tumours were included in this retrospective study. There were 28 atypical cartilaginous tumours, 79 grade 1 chondrosarcomas, 36 grade 2 chondrosarcomas, 13 grade 3 chondrosarcomas and 23 dedifferentiated chondrosarcomas. Multivariate analysis demonstrated that bone expansion (P = 0.001), active periostitis (P = 0.001), soft tissue mass (P < 0.001) and tumour length (P < 0.001) were statistically significant differentiating factors between low-grade and high-grade chondral lesions with an area under the ROC curve of 0.956. On MRI, bone expansion, active periostitis, soft tissue mass and tumour length can reliably differentiate high-grade chondrosarcomas from low-grade chondral lesions of the major long bones. (orig.)

7 CFR 810.404 - Grades and grade requirements for corn.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Grades and grade requirements for corn. 810.404... OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Corn Principles Governing the Application of Standards § 810.404 Grades and grade requirements for corn. Grade Minimum test weight per...

Online evaluation of a commercial video image analysis system (Computer Vision System) to predict beef carcass red meat yield and for augmenting the assignment of USDA yield grades. United States Department of Agriculture.

Science.gov (United States)

Cannell, R C; Belk, K E; Tatum, J D; Wise, J W; Chapman, P L; Scanga, J A; Smith, G C

2002-05-01

Objective quantification of differences in wholesale cut yields of beef carcasses at plant chain speeds is important for the application of value-based marketing. This study was conducted to evaluate the ability of a commercial video image analysis system, the Computer Vision System (CVS) to 1) predict commercially fabricated beef subprimal yield and 2) augment USDA yield grading, in order to improve accuracy of grade assessment. The CVS was evaluated as a fully installed production system, operating on a full-time basis at chain speeds. Steer and heifer carcasses (n = 296) were evaluated using CVS, as well as by USDA expert and online graders, before the fabrication of carcasses into industry-standard subprimal cuts. Expert yield grade (YG), online YG, CVS estimated carcass yield, and CVS measured ribeye area in conjunction with expert grader estimates of the remaining YG factors (adjusted fat thickness, percentage of kidney-pelvic-heart fat, hot carcass weight) accounted for 67, 39, 64, and 65% of the observed variation in fabricated yields of closely trimmed subprimals. The dual component CVS predicted wholesale cut yields more accurately than current online yield grading, and, in an augmentation system, CVS ribeye measurement replaced estimated ribeye area in determination of USDA yield grade, and the accuracy of cutability prediction was improved, under packing plant conditions and speeds, to a level close to that of expert graders applying grades at a comfortable rate of speed offline.

Readmission after treatment of Grade 3 and 4 renal injuries at a Level I trauma center: Statewide assessment using the Comprehensive Hospital Abstract Reporting System.

Science.gov (United States)

Winters, Brian; Wessells, Hunter; Voelzke, Bryan B

2016-03-01

One criticism of the existing renal trauma research is the limited outpatient follow-up after index hospitalization. We assessed readmission rates following treatment for American Association for the Surgery of Trauma (AAST) Grade 3 and 4 renal injury using the Comprehensive Hospital Abstract Reporting System (CHARS). We evaluated all patients with AAST Grade 3 and 4 renal injuries admitted to Harborview Medical Center (HMC) between 1998 and 2010, the only Level 1 trauma center in Washington state. Grade 4 renal injuries were stratified by collecting system laceration (CSL) or segmental vascular injury. Data were abstracted from the CHARS database for readmissions to any Washington state hospital within 6 months of renal injury. Clinical variables, diagnoses, and procedures were queried based on DRG International Classification of Diseases-9th Rev. codes. A total of 477 Grade 3 and 159 Grade 4 renal injuries were initially treated at HMC. On admission, 111 patients required intervention: 75 (16%) of 477 Grade 3 and 36 (23%) of 159 Grade 4 injuries. Within 6 months of index hospitalization, 86 (18%) of 477 Grade 3 and 38 (24%) of 159 Grade 4 patients were readmitted to any Washington state hospital. Eighty percent of Grade 3 injuries and 66% of Grade 4 injuries returned to HMC compared with secondary hospitals (p = 0.08). At readmission, 19 (22%) of 86 Grade 3 and 16 (42%) of 38 Grade 4 injuries had a urologic diagnosis. Subsequent procedural intervention was required on readmission in 6 (7%) of 86 Grade 3 and 5 (13%) of 38 Grade 4 renal injuries (all CSL injuries). A subset of patients treated for Grade 3 and 4 renal trauma will be readmitted for further management. While urologic diagnoses and additional procedures may be low overall, readmission to outside hospitals may preclude accurate determination of renal trauma outcomes. Based on these data, patients with Grade 4 CSL injuries seem to be at the highest risk for readmission and to require a subsequent

The role of low-grade inflammation and metabolic flexibility in aging and nutritional modulation thereof: A systems biology approach

NARCIS (Netherlands)

Calçada, D.; Vianello, D.; Giampieri, E.; Sala, C.; Castellani, G.; Graaf, A.A. de; Kremer, S.H.A.; Ommen, B. van; Feskens, E.; Santoro, A.; Franceschi, C.; Bouwman, J.

2014-01-01

Aging is a biological process characterized by the progressive functional decline of many interrelated physiological systems. In particular, aging is associated with the development of a systemic state of low-grade chronic inflammation (inflammaging), and with progressive deterioration of metabolic

The predictive validity of grade point average scores in a partial lottery medical school admission system

NARCIS (Netherlands)

Cohen-Schotanus, Janke; Muijtjens, Arno M. M.; Reinders, Jan J.; Agsteribbe, Jessica; van Rossum, Herman J. M.; van der Vleuten, Cees P. M.

2006-01-01

PURPOSE To ascertain whether the grade point average (GPA) of school-leaving examinations is related to study success, career development and scientific performance. The problem of restriction of range was expected to be partially reduced due to the use of a national lottery system weighted in

The Correlation of Metacognition with Critical Thinking Skills of Grade XI Students on Human Excretion System Concept

Directory of Open Access Journals (Sweden)

Dea Diella

2017-11-01

Full Text Available The aims of this study is to reveal metacognition and critical thinking skill of students grade XI, and also the correlation between metacognition with crititical thinking skill on human excretion system. The participants of this study consist of 100 students from grade XI of five different high schools in Tasikmalaya. Correlational method was used in this study. Instruments which used to obtain the data consist of metacognition test and critical thinking test. The students' metacognition was captured with the essay item related to the human excretion system concept. The multiple choice-reason item and essay item was used to capture the critical thinking skills. The results showed that students’ score at metacognition and critical thinking have a low average. The results also proved that metacognition has a positive correlation and moderately strong with critical thinking skills

Recovery, reuse and recycling by the United States wood packaging industry: 1993-2006

Science.gov (United States)

Robert J. Bush; Philip A. Araman; E. Bradley Hager

2007-01-01

The packaging industry is an important market for wood materials, especially low grade hardwoods. Approximately one-third of U.S. hardwood lumber production is utilized in the production of pallets and containers. The industry recovers significant volumes of pallets and containers from the waste stream for re-use, repair, and recycling. Industry by-products (both wood...

Industrial Art: Mission to Meaning

Science.gov (United States)

Wilhelm, Mike

2009-01-01

This is a story about industrial art. It is certainly not a story about smart studios and fashionable galleries, subtle techniques and aesthetic beauty. This is a story of sheet rock, nails, and low-grade lumber in the hands of unskilled teenage laborers. While this story boasts of no future museum pieces, it tells a heartwarming story of rare…

Tree value conversion standards revisited

Science.gov (United States)

Paul S. DeBald; Martin E. Dale; Martin E. Dale

1991-01-01

Updated tree value conversion standards (TVCS) are presented for 12 important hardwood species of the oak-hickory forest. These updated standards-developed for each species by butt-log grade, merchantable height, and diameter at breast height-reflect the changes in lumber prices and in conversion costs which have occurred since 1976 when the original TVCS were...

Shaping-lathe headrig will convert small hardwoods into pallet cants plus flakes for structural exterior flakeboard

Science.gov (United States)

Peter Koch

1975-01-01

Virtually all nations have an under-utilized resource of small-diameter, low-grade hardwoods of mixed species in a range of densities. The shaping-lathe headrig, now in the final stages of commercialization, is a key to utilizing these hardwoods for pallets, industrial lumber, and-with further development-railroad crossties. Lathe residues in the form of flakes can be...

The Value Versus Volume Yield Problem for Live-Sawn Hardwood Sawlogs

Science.gov (United States)

Philip H. Steele; Francis G. Wagner; Lalit Kumar; Philip A. Araman

1993-01-01

The potential conflict between value and volume maximization in sawing hardwood sawlogs by the live sawing method was analyzed. Twenty-four digitally described red oak sawlogs were sawn at the log orientation of highest value yield. Five opening face sawlines were iteratively placed in the sawlog a 1/4-inch intervals and lumber grades, volumes, and values from...

The lack of adequate quality assurance/quality control data hinders the assessment of potential forest degradation in a national forest inventory

Science.gov (United States)

Thomas Brandeis; Stanley Zarnoch; Christopher Oswalt; Jeffery Stringer

2017-01-01

Hardwood lumber harvested from the temperate broadleaf and mixed broadleaf/conifer forests of the east-central United States is an important economic resource. Forest industry stakeholders in this region have a growing need for accurate, reliable estimates of high-quality wood volume. While lower-graded timber has an increasingly wide array of uses, the forest products...

Utilization of the Eastern Hardwood Resource by the Hardwood Sawmilling Industry

Science.gov (United States)

William Luppold; John Baumgras; John Baumgras

2001-01-01

The eastern hardwood resource contains numerous species that differ in grain, color, texture, and workability. Because the value of hardwoods is derived from appearance, these variations in physical attributes can cause the price for identical grades of hardwood lumber to vary by as much as 600% between species. As a result, there is incentive for primary processors to...

The water footprint of wood for lumber, pulp, paper, fuel and firewood

Science.gov (United States)

Schyns, Joep F.; Booij, Martijn J.; Hoekstra, Arjen Y.

2017-09-01

This paper presents the first estimate of global water use in the forestry sector related to roundwood production for lumber, pulp, paper, fuel and firewood. For the period 1961-2010, we estimate forest evaporation at a high spatial resolution level and attribute total water consumption to various forest products, including ecosystem services. Global water consumption for roundwood production increased by 25% over 50 years to 961 × 109 m3/y (96% green; 4% blue) in 2001-2010. The water footprint per m3 of wood is significantly smaller in (sub)tropical forests compared to temperate/boreal forests, because (sub)tropical forests host relatively more value next to wood production in the form of other ecosystem services. In terms of economic water productivity and energy yield from bio-ethanol per unit of water, roundwood is rather comparable with major food, feed and energy crops. Recycling of wood products could effectively reduce the water footprint of the forestry sector, thereby leaving more water available for the generation of other ecosystem services. Intensification of wood production can only reduce the water footprint per unit of wood if the additional wood value per ha outweighs the loss of value of other ecosystem services, which is often not the case in (sub)tropical forests. The results of this study contribute to a more complete picture of the human appropriation of water, thus feeding the debate on water for food or feed versus energy and wood.

Will Instructors Save Time Using a Specifications Grading System?

Directory of Open Access Journals (Sweden)

Sarah Grace Prescott

2015-08-01

Full Text Available Review of: Specifications Grading: Restoring Rigor, Motivating Students, and Saving Faculty Time; Linda Nilson and Claudia J. Stranny; (2014. Stylus Publishing, Sterling, VA. 184 pages.

Developing Seventh Grade Students' Understanding of Complex Environmental Problems with Systems Tools and Representations: A Quasi-Experimental Study

Science.gov (United States)

Doganca Kucuk, Zerrin; Saysel, Ali Kerem

2018-01-01

A systems-based classroom intervention on environmental education was designed for seventh grade students; the results were evaluated to see its impact on the development of systems thinking skills and standard science achievement and whether the systems approach is a more effective way to teach environmental issues that are dynamic and complex. A…

Performance of resistance grading system at 14 UD Pelletron Accelerator Facility, BARC-TIFR, Mumbai

International Nuclear Information System (INIS)

Lal, Ram; Matkar, U.V.; Ekambaram, M.; Lokare, R.N.; Yadav, M.L.; Gore, J.A.; Kulkarni, S.G.; Gupta, A.K.; Bhagwat, P.V.; Kale, R.M.; Karande, J.N.; Kurup, M.B.

2005-01-01

The 14UD Pelletron Accelerator has been in operation for last sixteen years, progressively with increased efficiency. Since inception the accelerator was operating in slit control mode, however, with the installation of a TPS system, it is now possible to operate the accelerator in GVM mode even with ion beam of low intensities. Recently all the column and tube corona points were replaced by resistances. This has helped in low voltage operation of accelerator. In this paper we will discuss in detail the performance of new Terminal Potential Stabiliser system, particularly, our experience resistance grading, at the Pelletron Accelerator. (author)

Nuclear grade and necrosis predict prognosis in malignant epithelioid pleural mesothelioma: a multi-institutional study.

Science.gov (United States)

Rosen, Lauren E; Karrison, Theodore; Ananthanarayanan, Vijayalakshmi; Gallan, Alexander J; Adusumilli, Prasad S; Alchami, Fouad S; Attanoos, Richard; Brcic, Luka; Butnor, Kelly J; Galateau-Sallé, Françoise; Hiroshima, Kenzo; Kadota, Kyuichi; Klampatsa, Astero; Stang, Nolween Le; Lindenmann, Joerg; Litzky, Leslie A; Marchevsky, Alberto; Medeiros, Filomena; Montero, M Angeles; Moore, David A; Nabeshima, Kazuki; Pavlisko, Elizabeth N; Roggli, Victor L; Sauter, Jennifer L; Sharma, Anupama; Sheaff, Michael; Travis, William D; Vigneswaran, Wickii T; Vrugt, Bart; Walts, Ann E; Tjota, Melissa Y; Krausz, Thomas; Husain, Aliya N

2018-04-01

A recently described nuclear grading system predicted survival in patients with epithelioid malignant pleural mesothelioma. The current study was undertaken to validate the grading system and to identify additional prognostic factors. We analyzed cases of epithelioid malignant pleural mesothelioma from 17 institutions across the globe from 1998 to 2014. Nuclear grade was computed combining nuclear atypia and mitotic count into a grade of I-III using the published system. Nuclear grade was assessed by one pathologist for three institutions, the remaining were scored independently. The presence or absence of necrosis and predominant growth pattern were also evaluated. Two additional scoring systems were evaluated, one combining nuclear grade and necrosis and the other mitotic count and necrosis. Median overall survival was the primary endpoint. A total of 776 cases were identified including 301 (39%) nuclear grade I tumors, 354 (45%) grade II tumors and 121 (16%) grade III tumors. The overall survival was 16 months, and correlated independently with age (P=0.006), sex (0.015), necrosis (0.030), mitotic count (0.001), nuclear atypia (0.009), nuclear grade (<0.0001), and mitosis and necrosis score (<0.0001). The addition of necrosis to nuclear grade further stratified overall survival, allowing classification of epithelioid malignant pleural mesothelioma into four distinct prognostic groups: nuclear grade I tumors without necrosis (29 months), nuclear grade I tumors with necrosis and grade II tumors without necrosis (16 months), nuclear grade II tumors with necrosis (10 months) and nuclear grade III tumors (8 months). The mitosis-necrosis score stratified patients by survival, but not as well as the combination of necrosis and nuclear grade. This study confirms that nuclear grade predicts survival in epithelioid malignant pleural mesothelioma, identifies necrosis as factor that further stratifies overall survival, and validates the grading system across multiple

Childhood bullying involvement predicts low-grade systemic inflammation into adulthood

Science.gov (United States)

Copeland, William E.; Wolke, Dieter; Lereya, Suzet Tanya; Shanahan, Lilly; Worthman, Carol; Costello, E. Jane

2014-01-01

Bullying is a common childhood experience that involves repeated mistreatment to improve or maintain one’s status. Victims display long-term social, psychological, and health consequences, whereas bullies display minimal ill effects. The aim of this study is to test how this adverse social experience is biologically embedded to affect short- or long-term levels of C-reactive protein (CRP), a marker of low-grade systemic inflammation. The prospective population-based Great Smoky Mountains Study (n = 1,420), with up to nine waves of data per subject, was used, covering childhood/adolescence (ages 9–16) and young adulthood (ages 19 and 21). Structured interviews were used to assess bullying involvement and relevant covariates at all childhood/adolescent observations. Blood spots were collected at each observation and assayed for CRP levels. During childhood and adolescence, the number of waves at which the child was bullied predicted increasing levels of CRP. Although CRP levels rose for all participants from childhood into adulthood, being bullied predicted greater increases in CRP levels, whereas bullying others predicted lower increases in CRP compared with those uninvolved in bullying. This pattern was robust, controlling for body mass index, substance use, physical and mental health status, and exposures to other childhood psychosocial adversities. A child’s role in bullying may serve as either a risk or a protective factor for adult low-grade inflammation, independent of other factors. Inflammation is a physiological response that mediates the effects of both social adversity and dominance on decreases in health. PMID:24821813

Clinical significance of a proposed lymphoscintigrpahic functional grade system in patients with extremity lymphedema of stage i

International Nuclear Information System (INIS)

Choi, Joan Young; Hwang, Ji Hye; Kim, Dong Ik; Cho, Young Seok; Lee, Su Jin; Choi, Yong; Choe, Yeam Seong; Lee, Kyung Han; Kim, Byung Tae

2005-01-01

We proposed a new lymphoscintigrpahic functional grade (LGr) system in extremity lymphedema, and investigated the association between the LGr and a long-term response to physical therapy in patients with extremity lymphedema of stage I. The subjects were 20 patients with unilateral extremity lymphedema of stage I, who underwent pre-treatment extremity lymphoscintigraphy using Tc-99m antimony sulfur colloid, and were treated by complex decongestive physical therapy (CDPT). A proposed lymphoscintigrpahic functional grade system consisted of LGr 0 to LGr 4 according to the ilioinguinal nodal uptake, amount of dermal backflow, and uptake pattern of main and collateral lymphatics : LGr 0 = normal, LGr 1 = decreased lymphatic function without dermal backflow, LGr 2 = decreased lymphatic function with dermal backflow, LGr 3 = non - visualization of main lymphatics with dermal backflow, and LGr 4 = no significant lymphatic transport from injection site. LGr 2 was divided into 2A and 2B based on the amount of dermal backflow. A physician who is a lymphedema specialist determined the long-term outcome to CDPT with normalized response (NR), good response (GR) and poor response (PR) based on the change of edema volume reduction, skin status and occurrence of dermatolymphangioadenitis after the clinical follow-up for more than 1 year. Therapeutic responses were NR in 2 patients. GR in 9 patients and PR in 9 patients. Baseline LGrs were 1 in 7 patients, 2A in 4 patients, 2B in 5 patients, 3 in 2 patients, and 4 in 2 patients. There was a significant relationship between therapeutic response and LGr (p=0.003). In other words, 10 of 11 patients (91%) with LGr 1 or 2A showed NR. or GR. On the contrary, 8 of 9 patients (89%) with LGr 2B, 3 or 4 showed PR. Patients with unilateral extremity lymphedema of stage I had different lymphoscintigrpahic functional grades. This grade system may be useful to predict the response to physical therapy in such patients

Clinical significance of a proposed lymphoscintigrpahic functional grade system in patients with extremity lymphedema of stage i

Energy Technology Data Exchange (ETDEWEB)

Choi, Joan Young; Hwang, Ji Hye; Kim, Dong Ik; Cho, Young Seok; Lee, Su Jin; Choi, Yong; Choe, Yeam Seong; Lee, Kyung Han; Kim, Byung Tae [Samsung Medical Center, Sungkyunkwan University School of Medicine, Seoul (Korea, Republic of)

2005-07-01

We proposed a new lymphoscintigrpahic functional grade (LGr) system in extremity lymphedema, and investigated the association between the LGr and a long-term response to physical therapy in patients with extremity lymphedema of stage I. The subjects were 20 patients with unilateral extremity lymphedema of stage I, who underwent pre-treatment extremity lymphoscintigraphy using Tc-99m antimony sulfur colloid, and were treated by complex decongestive physical therapy (CDPT). A proposed lymphoscintigrpahic functional grade system consisted of LGr 0 to LGr 4 according to the ilioinguinal nodal uptake, amount of dermal backflow, and uptake pattern of main and collateral lymphatics : LGr 0 = normal, LGr 1 = decreased lymphatic function without dermal backflow, LGr 2 = decreased lymphatic function with dermal backflow, LGr 3 = non - visualization of main lymphatics with dermal backflow, and LGr 4 = no significant lymphatic transport from injection site. LGr 2 was divided into 2A and 2B based on the amount of dermal backflow. A physician who is a lymphedema specialist determined the long-term outcome to CDPT with normalized response (NR), good response (GR) and poor response (PR) based on the change of edema volume reduction, skin status and occurrence of dermatolymphangioadenitis after the clinical follow-up for more than 1 year. Therapeutic responses were NR in 2 patients. GR in 9 patients and PR in 9 patients. Baseline LGrs were 1 in 7 patients, 2A in 4 patients, 2B in 5 patients, 3 in 2 patients, and 4 in 2 patients. There was a significant relationship between therapeutic response and LGr (p=0.003). In other words, 10 of 11 patients (91%) with LGr 1 or 2A showed NR. or GR. On the contrary, 8 of 9 patients (89%) with LGr 2B, 3 or 4 showed PR. Patients with unilateral extremity lymphedema of stage I had different lymphoscintigrpahic functional grades. This grade system may be useful to predict the response to physical therapy in such patients.

Findings of the inspection grading system on industrial radiography

International Nuclear Information System (INIS)

Gloria Doloressa

2011-01-01

The use of industrial radiography techniques evolve rapidly and widely. Various jobs in industry require the examination of welding techniques / connecting pipes and metal construction. The use of industrial radiography is one type of utilization of nuclear energy must get control so that its use does not cause harmful impacts to worker safety, community, and environment. Regulations is done through inspections, in order to supervise the observance of the terms in the licensing and legislation in the field of nuclear safety. The main purpose of inspection is to ensure the utilization of radiation sources of radiation have been used with. Findings of the inspection is a decline in the performance of licensees in meeting safety requirements. The Grading System to the findings of the inspection needs to be done to improve the effectiveness and efficiency of inspection, and it is expected that the company can improve the management of radiation safety. (author)

Clinical Validation of the 2005 ISUP Gleason Grading System in a Cohort of Intermediate and High Risk Men Undergoing Radical Prostatectomy.

Directory of Open Access Journals (Sweden)

Sheila F Faraj

Full Text Available In 2005, the International Society of Urological Pathology (ISUP introduced several modifications to the original Gleason system that were intended to enhance the prognostic power of Gleason score (GS. The objective of this study was to clinically validate the 2005 ISUP Gleason grading system for its ability to detect metastasis. We queried our institutional RP database for men with NCCN clinically localized intermediate to high-risk disease undergoing radical prostatectomy (RP between 1992 and 2010 with no additional treatment until the time of metastatic progression. A case-cohort design was utilized. A total of 333 available RP samples were re-reviewed and GS was reassigned per the 2005 ISUP Gleason system. Cumulative incidence of metastasis was 0%, 8.4%, 24.5% and 44.4% among specimens that were downgraded, unchanged, had one point GS increase and two point GS increase, respectively. The hazard ratio for metastasis raised in GS 8 and 9 compared to GS 7 from 2.77 and 5.91 to 3.49 and 9.31, respectively. The survival c-index of GS increased from 0.70 to 0.80 when samples were re-graded at 5 years post RP. The c-index of the reassigned GS was higher than the original GS (0.77 vs 0.64 for predicting PCSM at 10 years post RP. The regraded GS improved the prediction of metastasis and PCSM. This validates the updated Gleason grading system using an unambiguous clinical endpoint and highlights the need for reassignment of Gleason grading according to 2005 ISUP system when considering comparisons of novel biomarkers to clinicopathological variables in archival cohorts.

On-Demand Grades: The Effect of Online Grade Book Access on Student Mastery and Performance Goal Orientations, Grade Orientation, Academic Self Efficacy, and Grades

Science.gov (United States)

Seldow, Adam Lowell

2010-01-01

With the widespread growth of broadband Internet access, teachers, and in many cases, schools and school districts are transitioning from traditional paper-based grade books to student accessible online (Web-based) grade books. Online grade books offer students 24/7, on demand access to grades and various other student data, and have the potential…

Project Based Learning in Multi-Grade Class

Science.gov (United States)

Ciftci, Sabahattin; Baykan, Ayse Aysun

2013-01-01

The purpose of this study is to evaluate project based learning in multi-grade classes. This study, based on a student-centered learning approach, aims to analyze students' and parents' interpretations. The study was done in a primary village school belonging to the Centre of Batman, already adapting multi-grade classes in their education system,…

Quality assurance grading of conventional equipment at nuclear power station

International Nuclear Information System (INIS)

Li Ping; Li Shichang

2006-01-01

Equipment QA grading with the systematic and standardized approach will benefit the concerned organizations by effective allocating of limited resources to guarantee the quality of essential equipment. This paper presents a new quality assurance grading system for the convention systems/equipment of nuclear power station, which is operative and at the same time could help the owner to allot resource reasonably through the analysis of the purpose of grading and the experience and lessons of LINGAO Phase I project. (authors)

Applying Hamming Code to Memory System of Safety Grade PLC (POSAFE-Q) Processor Module

Energy Technology Data Exchange (ETDEWEB)

Kim, Taehee; Hwang, Sungjae; Park, Gangmin [POSCO Nuclear Technology, Seoul (Korea, Republic of)

2013-05-15

If some errors such as inverted bits occur in the memory, instructions and data will be corrupted. As a result, the PLC may execute the wrong instructions or refer to the wrong data. Hamming Code can be considered as the solution for mitigating this mis operation. In this paper, we apply hamming Code, then, we inspect whether hamming code is suitable for to the memory system of the processor module. In this paper, we applied hamming code to existing safety grade PLC (POSAFE-Q). Inspection data are collected and they will be referred for improving the PLC in terms of the soundness. In our future work, we will try to improve time delay caused by hamming calculation. It will include CPLD optimization and memory architecture or parts alteration. In addition to these hamming code-based works, we will explore any methodologies such as mirroring for the soundness of safety grade PLC. Hamming code-based works can correct bit errors, but they have limitation in multi bits errors.

Applying Hamming Code to Memory System of Safety Grade PLC (POSAFE-Q) Processor Module

International Nuclear Information System (INIS)

Kim, Taehee; Hwang, Sungjae; Park, Gangmin

2013-01-01

If some errors such as inverted bits occur in the memory, instructions and data will be corrupted. As a result, the PLC may execute the wrong instructions or refer to the wrong data. Hamming Code can be considered as the solution for mitigating this mis operation. In this paper, we apply hamming Code, then, we inspect whether hamming code is suitable for to the memory system of the processor module. In this paper, we applied hamming code to existing safety grade PLC (POSAFE-Q). Inspection data are collected and they will be referred for improving the PLC in terms of the soundness. In our future work, we will try to improve time delay caused by hamming calculation. It will include CPLD optimization and memory architecture or parts alteration. In addition to these hamming code-based works, we will explore any methodologies such as mirroring for the soundness of safety grade PLC. Hamming code-based works can correct bit errors, but they have limitation in multi bits errors

7 CFR 810.1804 - Grades and grade requirements for sunflower seed.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Grades and grade requirements for sunflower seed. 810... AGRICULTURE OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Sunflower Seed Principles Governing the Application of Standards § 810.1804 Grades and grade requirements for sunflower seed. Grade...

Coupled plasmon modes and their localization in graded plasmonic chains

International Nuclear Information System (INIS)

Xiao, J.J.; Yakubo, K.; Yu, K.W.

2007-01-01

Plasmonic waves occur in the subwavelength scale with transverse confinement below the diffraction limit. In this work, we report results of longitudinal localization-delocalization transitions of coupled plasmon modes in graded chains of metallic nanodots. Two graded models are studied: graded index of refraction in the host medium and incremental spacing between the nanoparticles. The coupled plasmon modes in these graded systems exhibit strong localization, showing a tunable passband in finite size systems. These localized modes survive in presence of weak loss in the nanodots. To understand the localization mechanism, we construct equivalent systems of one-dimensional coupled harmonic oscillators, whose coupling strength or masses are gradually varied from one end to the other, with additional on-site potentials. Confining and transmitting electromagnetic energy in these structures may pave new way for many fruitful applications in plasmonics

The Nine-Step Minnesota Grading System for Eyebank Eyes With Age Related Macular Degeneration: A Systematic Approach to Study Disease Stages.

Science.gov (United States)

Olsen, Timothy W; Liao, Albert; Robinson, Hershonna S; Palejwala, Neal V; Sprehe, Nicholas

2017-10-01

To refine the Minnesota Grading System (MGS) using definitions from the Age-Related Eye Disease Studies (AREDS) into a nine-step grading scale (MGS-9). A nine-step grading scale descriptive analysis using three key phenotypic features (total drusen area, increased, and decreased pigmentation) of human eyebank eyes that were graded according to definitions from the AREDS criteria in order to harmonize studies of disease progression for research involving human tissue. From 2005 through February 2017, we have analyzed 1159 human eyes, procured from two eyebanks. Each macula was imaged using high-resolution, stereoscopic color fundus photography with both direct- and transillumination. Fundus images were digitally overlaid with a grading template and triangulated for foveal centration. We documented and stratified risk for each globe by applying the AREDS nine-step grading scale to the key clinical features from the MGS-9. We found a good distribution within the MGS categories (1-9) with few level eight globes. Eyes were processed within 12.1 ± 6.3, hours from the time of death through imaging, dissection, and freezing or fixation. Applying the MGS-9 to 331 pairs (662 eyes were simultaneously graded), 84% were within one-grading step and 93% within two steps of the fellow eye. We also document reticular pseudodrusen, basal laminar drusen, and pattern dystrophy. The MGS nine-step grading scale enables researchers using human tissue to refine the risk assessment of donor tissue. This analysis will harmonize results among researchers when grading human tissue using MGS criteria. Most importantly, the MGS-9 links directly to the known risk for progression from the AREDS.

Dextranomer/hyaluronic acid endoscopic injection is effective in the treatment of intermediate and high grade vesicoureteral reflux in patients with complete duplex systems.

Science.gov (United States)

Hunziker, Manuela; Mohanan, Nochiparambil; Puri, Prem

2013-05-01

Endoscopic subureteral injection of dextranomer/hyaluronic acid has become an established alternative to long-term antibiotic prophylaxis or surgical treatment for vesicoureteral reflux. We evaluated the effectiveness of endoscopic injection of dextranomer/hyaluronic acid in intermediate and high grade vesicoureteral reflux in patients with complete duplex collecting systems. A total of 123 children underwent endoscopic correction of intermediate or high grade vesicoureteral reflux using injection of dextranomer/hyaluronic acid into complete duplex systems between 2001 and 2010. Vesicoureteral reflux was diagnosed by voiding cystourethrogram, and dimercapto-succinic acid scan was performed to evaluate the presence of renal scarring. Followup ultrasound and voiding cystourethrogram were performed 3 months after the outpatient procedure and renal ultrasound thereafter every 2 years. Mean followup was 6.7 years. Complete duplex systems were unilateral in 110 patients and bilateral in 13. Reflux severity in the 136 refluxing units was grade II in 1 (0.7%), III in 52 (38.2%), IV in 61 (44.9%) and V in 22 (16.2%). Dimercapto-succinic acid scan revealed renal functional abnormalities in 63 children (51.2%). Vesicoureteral reflux resolved after the first endoscopic injection of dextranomer/hyaluronic acid in 93 ureters (68.4%), after a second injection in 35 (25.7%) and after a third injection in 8 (5.9%). Febrile urinary tract infection developed in 5 patients (4.1%) during followup. No patient required ureteral reimplantation or experienced significant complications. Our results confirm the safety and efficacy of endoscopic injection of dextranomer/hyaluronic acid in eradicating intermediate and high grade vesicoureteral reflux in patients with complete duplex systems. We recommend this minimally invasive, 15-minute outpatient procedure as a viable option for treating intermediate and high grade vesicoureteral reflux in patients with complete duplex collecting systems

Establishment of quality system program for the manufacture of nuclear grade steels

International Nuclear Information System (INIS)

Saito, Toru

1978-01-01

Recently, the pressure vessels employed in the fields of nuclear power generation, petroleum refining, and chemical industry tend to be large size and high performance, therefore thick steel plates and forgings of high quality are demanded, and the establishment and maintenance of strict quality assurance system for material production are required. In Mizushima Works, Kawasaki Steel Corp., the installations for large forgings and thick plates were constructed from 1969 to 1976, and the researches on the development of production techniques were forwarded in parallel. A Quality System Certificate (Material) has been granted to Mizushima Works on March 11, 1977, by the American Society of Mechanical Engineers for the manufacture of steel plates and forgings of nuclear grade. The quality system manual as the basis of quality assurance activities, the organization for quality assurance, its responsibility and authority, the discrimination of materials, the control of manufacturing processes, the qualification of workers in charge of nondestructive test, welding, heat treatment and others, the management of tests and inspections, the management of products with faults and repairing measures, and internal supervisory system are explained. The wide use of computers is novel in the field of quality system program. (Kako, I.)

Diagnostic accuracy of pre-treatment biopsy for grading cutaneous mast cell tumours in dogs.

Science.gov (United States)

Shaw, T; Kudnig, S T; Firestone, S M

2018-06-01

Mast cell tumours (MCTs) are common tumours of the canine skin, and are estimated to represent up to 20% of all skin tumours in dogs. Tumour grade has a major impact on the incidence of local recurrence and metastatic potential. In addition to helping the clinician with surgical planning, knowledge of the tumour grade also assists in proper prognostication and client education. For pre-treatment biopsies to be useful, there must exist a high level of correlation between the histopathological grade obtained from the pre-treatment biopsy and the actual histopathological grade from the excisional biopsy. The aim of this study was to determine concordance of tumour grade between various biopsy techniques (wedge, punch, needle core) and the "gold standard" excisional biopsy method. We found an overall concordance rate of 96% based on the Patnaik grading system, and an overall concordance rate of 92% based on the Kiupel grading system. The accuracy of the various biopsy techniques (wedge, punch and needle core) when compared with excisional biopsy was 92%, 100% and 100%, respectively, based on the Patnaik grading system, and 90%, 95% and 100%, respectively, based on the Kiupel grading system. Of the cases with discordant results, the pre-treatment biopsies tended to underestimate the grade of the tumour. Based on these results, we conclude that pre-treatment biopsies are sufficiently accurate for differentiating low-grade from high-grade MCTs, regardless of biopsy technique or tumour location. © 2017 John Wiley & Sons Ltd.

Gluing of Eastern Hardwoods: A Review

Science.gov (United States)

Terry Sellers; James R. McSween; William T. Nearn

1988-01-01

Over a period of years, inrreasing demand for softwoods in the Eastern United States has led to an increase in the growth of hardwoods on cut-over softwood sites. Unfortunately these hardwood trees are often of a size and shape unsuitable for the production of high-grade lumber and veneer. They do, however, represent a viable, economic soures of raw material for...

Rough mill simulator version 3.0: an analysis tool for refining rough mill operations

Science.gov (United States)

Edward Thomas; Joel Weiss

2006-01-01

ROMI-3 is a rough mill computer simulation package designed to be used by both rip-first and chop-first rough mill operators and researchers. ROMI-3 allows users to model and examine the complex relationships among cutting bill, lumber grade mix, processing options, and their impact on rough mill yield and efficiency. Integrated into the ROMI-3 software is a new least-...

Tumor grade-related thallium-201 uptake in chondrosarcomas

International Nuclear Information System (INIS)

Kaya, G.C.; Demir, Y.; Ozkal, S.

2010-01-01

Diagnosis of low-grade chondrosarcoma, especially discrimination between enchondroma and low-grade chondrosarcoma, may be difficult pathologically. The aim of this study was to evaluate the value of thallium-201 (Tl-201) scintigraphy in the diagnosis of chondrosarcoma and to investigate whether there was a correlation between Tl-201 uptake and tumor grade. We retrospectively evaluated 121 patients with pathologically proven bone and soft tissue tumors diagnosed between the years 1999 and 2007. All patients were followed by the Bone and Soft Tissue Tumor Working Group in our hospital. Twenty-three patients, mean age 44±15 (range 17-72) years, with a diagnosis of cartilaginous tumors were included. Increased Tl-201 uptake at the lesion sites greater than background was evaluated as malignant tumor. For the pathologic classification, a grading system (grade 1-3) based on the histopathologic findings was used. Pearson correlation coefficient was used to determine whether there was any correlation between Tl-201 uptake and tumor grade in chondrosarcoma. There were 7 enchondromas and 16 chondrosarcomas. Four of 16 patients with chondrosarcoma had lesions pathologically classified as grade 3, 5 as grade 2, and 7 had grade 1 chondrosarcoma. Increased Tl-201 uptake was observed in all patients with grade 3 chondrosarcoma and 2 patients with grade 2 chondrosarcoma. Of 10 patients with chondrosarcoma, 3 grade 2 chondrosarcomas and 7 grade 1 chondrosarcomas, there was no Tl-201 uptake in the tumor region. A significant correlation was found between Tl-201 uptake and tumor grade in chondrosarcoma (p=0.002, r=0.71). Only a few reports in literature have demonstrated false negative results in low-grade chondrosarcoma. Tl-201 uptake was related to tumor grade in chondrosarcoma. If there is a possibility of chondrosarcoma, Tl-201 scintigraphy should be reported with caution. (author)

What is current practice in soft tissue sarcoma grading?

International Nuclear Information System (INIS)

Golouh, R.; Bracko, M.

2001-01-01

Purpose. Most published grading systems of soft tissue sarcomas (STS) are somewhat subjective and it seems that there is no definite consensus among experts which of them is the most effective. The aim of this study was to collect data from practicing pathologists and to get some insight in the practice of STS grading. Subjects. A questionnaire was sent to 135 pathologists chosen randomly. Results. There were 88 responders from 30 countries from 5 continents. Most responders (85%) grade STS, more frequently in Europe than in non-European countries. Three-grade system is preferred by both European and non-European pathologists, who use it in almost 77% and 67%, respectively. They apply the criteria set by FNCLCC in 37.3%, by NCI in 24%, by Broders in 12% and by Markhede in 1.4%. In Europe, FNCLCC system is the most widely used. Beside classical histological criteria, other modern methods are applied by more than one half of the responders. Immunohistochemical evaluation of proliferation markers is the method most widely used, followed by molecular markers and DNA flow cytometry. Conclusion. The results of our study indicate that most pathologists consider histologic grade of STS as a valuable, however not completely satisfactory predictor of a patient's survival. (author)

Upgrading and downgrading of prostate cancer from biopsy to radical prostatectomy: incidence and predictive factors using the modified Gleason grading system and factoring in tertiary grades.

Science.gov (United States)

Epstein, Jonathan I; Feng, Zhaoyong; Trock, Bruce J; Pierorazio, Phillip M

2012-05-01

Prior studies assessing the correlation of Gleason score (GS) at needle biopsy and corresponding radical prostatectomy (RP) predated the use of the modified Gleason scoring system and did not factor in tertiary grade patterns. To assess the relation of biopsy and RP grade in the largest study to date. A total of 7643 totally embedded RP and corresponding needle biopsies (2004-2010) were analyzed according to the updated Gleason system. All patients underwent prostate biopsy prior to RP. The relation of upgrading or downgrading to patient and cancer characteristics was compared using the chi-square test, Student t test, and multivariable logistic regression. A total of 36.3% of cases were upgraded from a needle biopsy GS 5-6 to a higher grade at RP (11.2% with GS 6 plus tertiary). Half of the cases had matching GS 3+4=7 at biopsy and RP with an approximately equal number of cases downgraded and upgraded at RP. With biopsy GS 4+3=7, RP GS was almost equally 3+4=7 and 4+3=7. Biopsy GS 8 led to an almost equal distribution between RP GS 4+3=7, 8, and 9-10. A total of 58% of the cases had matching GS 9-10 at biopsy and RP. In multivariable analysis, increasing age (pfactoring in multiple variables including the number of positive cores and the maximum percentage of cancer per core, the concordance indexes were not sufficiently high to justify the use of nomograms for predicting upgrading and downgrading for the individual patient. Almost 20% of RP cases have tertiary patterns. A needle biopsy can sample a tertiary higher Gleason pattern in the RP, which is then not recorded in the standard GS reporting, resulting in an apparent overgrading on the needle biopsy. Copyright © 2012 European Association of Urology. Published by Elsevier B.V. All rights reserved.

Hypoactivation of reward motivational system in patients with newly diagnosed hypertension grade I-II.

Science.gov (United States)

Aftanas, L I; Brak, I V; Gilinskaya, O M; Korenek, V V; Pavlov, S V; Reva, N V

2014-08-01

In patients with newly diagnosed untreated grade I-II hypertension, EEG oscillations were recorded under conditions activation of the two basic motivational systems, defensive motivational system and positive reinforcement system, evoked by recall of personally meaningful emotional events. The 64-channel EEG and cardiovascular reactivity (beat-by-beat technology) were simultaneously recorded. At rest, hypertensive patients had significantly reduced platelet serotonin concentrations in comparison with healthy individuals. The patients experiencing emotional activation were characterized by significantly lower intensity of positive emotions associated with more pronounced suppression of EEG activity in the delta (2-4 Hz) and theta (ranges of frequency 4-6 and 6-8 Hz) oscillators in the parieto-occipital cortex (zones P and PO) in both hemispheres of the brain. The findings attest to insufficient function of the brain serotonin system and hypoactivation of the reward/reinforcement system in patients with primary hypertension.

High grade glioma: Imaging combined with pathological grade defines management and predicts prognosis

International Nuclear Information System (INIS)

Burnet, Neil G.; Lynch, Andrew G.; Jefferies, Sarah J.; Price, Stephen J.; Jones, Phil H.; Antoun, Nagui M.; Xuereb, John H.; Pohl, Ute

2007-01-01

Introduction: There is ambiguity in pathological grading of high grade gliomas within the WHO 2000 classification, especially those with predominant oligodendroglial differentiation. Patients and methods: All adult high grade gliomas treated radically, 1996-2005, were assessed. Cases in which pathology was grade III but radiology suggested glioblastoma (GBM) were classified as 'grade III/IV'; their pathology was reviewed. Results: Data from 245 patients (52 grade III, 18 grade III/IV, 175 GBM) were analysed using a Cox Proportional Hazards model. On pathology review, features suggestive of more aggressive behaviour were found in all 18 grade III/IV tumours. Oligodendroglial components with both necrosis and microvascular proliferation were present in 7. MIB-1 counts for the last 8 were all above 14%, mean 27%. Median survivals were: grade III 34 months, grade III/IV 10 months, GBM 11 months. Survival was not significantly different between grade III/IV and GBM. Patients with grade III/IV tumours had significantly worse outcome than grade III, with a hazard of death 3.7 times higher. Conclusions: The results highlight the current inconsistency in pathological grading of high grade tumours, especially those with oligodendroglial elements. Patients with histological grade III tumours but radiological appearances suggestive of GBM should be managed as glioblastoma

Computer Vision System For Locating And Identifying Defects In Hardwood Lumber

Science.gov (United States)

Conners, Richard W.; Ng, Chong T.; Cho, Tai-Hoon; McMillin, Charles W.

1989-03-01

This paper describes research aimed at developing an automatic cutup system for use in the rough mills of the hardwood furniture and fixture industry. In particular, this paper describes attempts to create the vision system that will power this automatic cutup system. There are a number of factors that make the development of such a vision system a challenge. First there is the innate variability of the wood material itself. No two species look exactly the same, in fact, they can have a significant visual difference in appearance among species. Yet a truly robust vision system must be able to handle a variety of such species, preferably with no operator intervention required when changing from one species to another. Secondly, there is a good deal of variability in the definition of what constitutes a removable defect. The hardwood furniture and fixture industry is diverse in the nature of the products that it makes. The products range from hardwood flooring to fancy hardwood furniture, from simple mill work to kitchen cabinets. Thus depending on the manufacturer, the product, and the quality of the product the nature of what constitutes a removable defect can and does vary. The vision system must be such that it can be tailored to meet each of these unique needs, preferably without any additional program modifications. This paper will describe the vision system that has been developed. It will assess the current system capabilities, and it will discuss the directions for future research. It will be argued that artificial intelligence methods provide a natural mechanism for attacking this computer vision application.

Identification of neuropathic pain in patients with neck/upper limb pain: application of a grading system and screening tools.

Science.gov (United States)

Tampin, Brigitte; Briffa, Noelle Kathryn; Goucke, Roger; Slater, Helen

2013-12-01

The Neuropathic Pain Special Interest Group (NeuPSIG) of the International Association for the Study of Pain has proposed a grading system for the presence of neuropathic pain (NeP) using the following categories: no NeP, possible, probable, or definite NeP. To further evaluate this system, we investigated patients with neck/upper limb pain with a suspected nerve lesion, to explore: (i) the clinical application of this grading system; (ii) the suitability of 2 NeP questionnaires (Leeds Assessment of Neuropathic Symptoms and Signs pain scale [LANSS] and the painDETECT questionnaire [PD-Q]) in identifying NeP in this patient cohort; and (iii) the level of agreement in identifying NeP between the NeuPSIG classification system and 2 NeP questionnaires. Patients (n = 152; age 52 ± 12 years; 53% male) completed the PD-Q and LANSS questionnaire and underwent a comprehensive clinical examination. The NeuPSIG grading system proved feasible for application in this patient cohort, although it required considerable time and expertise. Both questionnaires failed to identify a large number of patients with clinically classified definite NeP (LANSS sensitivity 22%, specificity 88%; PD-Q sensitivity 64%, specificity 62%). These lowered sensitivity scores contrast with those from the original PD-Q and LANSS validation studies and may reflect differences in the clinical characteristics of the study populations. The diagnostic accuracy of LANSS and PD-Q for the identification of NeP in patients with neck/upper limb pain appears limited. Copyright © 2013 International Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

Comparison between clinical grading and navigation data of knee laxity in ACL-deficient knees

Directory of Open Access Journals (Sweden)

Yamamoto Yuji

2010-11-01

Full Text Available Abstract Background The latest version of the navigation system for anterior cruciate ligament (ACL reconstruction has the supplementary ability to assess knee stability before and after ACL reconstruction. In this study, we compared navigation data between clinical grades in ACL-deficient knees and also analyzed correlation between clinical grading and navigation data. Methods 150 ACL deficient knees that received primary ACL reconstruction using an image-free navigation system were included. For clinical evaluation, the Lachman, anterior drawer, and pivot shift tests were performed under general anesthesia and were graded by an examiner. For the assessment of knee stability using the navigation system, manual tests were performed again before ACL reconstruction. Navigation data were recorded as anteroposterior (AP displacement of the tibia for the Lachman and anterior drawer tests, and both AP displacement and tibial rotation for the pivot shift test. Results Navigation data of each clinical grade were as follows; Lachman test grade 1+: 10.0 mm, grade 2+: 13.2 ± 3.1 mm, grade 3+: 14.5 ± 3.3 mm, anterior drawer test grade 1+: 6.8 ± 1.4 mm, grade 2+: 7.4 ± 1.8 mm, grade 3+: 9.1 ± 2.3 mm, pivot shift test grade 1+: 3.9 ± 1.8 mm/21.5° ± 7.8°, grade 2+: 4.8 ± 2.1 mm/21.8° ± 7.1°, and grade 3+: 6.0 ± 3.2 mm/21.1° ± 7.1°. There were positive correlations between clinical grading and AP displacement in the Lachman, and anterior drawer tests. Although positive correlations between clinical grading and AP displacement in pivot shift test were found, there were no correlations between clinical grading and tibial rotation in pivot shift test. Conclusions In response to AP force, the navigation system can provide the surgeon with correct objective data for knee laxity in ACL deficient knees. During the pivot shift test, physicians may grade according to the displacement of the tibia, rather than rotation.

A DHT Key-Value Storage System with Carrier Grade Performance

Science.gov (United States)

Shi, Guangyu; Chen, Jian; Gong, Hao; Fan, Lingyuan; Xue, Haiqiang; Lu, Qingming; Liang, Liang

The Peer-to-Peer (P2P) technology being widely adopted in today’s both academic research and practical service providing, has many potential advantages and achieves a great success in Information Technology scope. Recently some researchers have proposed that P2P inspired architecture also might be one choice for the telecom network evolution. Most of such works adopted structured P2P (DHT) as the basic solutions, but they seldom discussed how to eliminate the huge gap between the telecom underlay performance requirement and the performance of existed DHT which mainly originated from the Internet applications. This paper presents the design and implementation of SandStone, a DHT based key-value storage system with carrier grade performance, such as good scalability, strong consistency and high reliability, which could be deployed as the cornerstone in such new P2P inspired networking architectures.

Achievement report in fiscal 2000 on technical development to recycle waste building materials and glasses. Development of waste building material recycling technology (Research and development of wooden board manufacturing technology using demolished building lumbers); 2000 nendo kenchiku glass nado recycle gijutsu kaihatsu seika hokokusho. Kenhciku haizai recycle gijutsu kaihatsu (kenchiku kaitai mokuzai wo mochiita mokushitsu board seizo gijutsu no kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development has been made on a wooden board manufacturing technology re-utilizing demolished building lumbers and waste plastics with an intention of saving resources and reducing wastes. This paper summarizes the achievements in fiscal 2000. In developing the technology to re-use demolished building lumbers, a method for removing metals attached to demolished building lumbers was established by using a magnetic separator and a metal detector, with which it was verified that iron can be removed nearly 100%. With regard to waste plastics, simultaneous use of specific gravity separation utilizing centrifugal force and electrostatic separation provided a prospect that metals and plastics of high melting points can be removed from mixed resins in waste household electric appliances, and that polypropylene (PP), polystyrene (PS), and ABS can be classified at high accuracy. In manufacturing waste wood and waste plastic boards, pilot plants were built to use the 'melt spray method', 'melt blow method', and 'laminating method' as the means to spray molten resin onto wood raw materials, wherein trials were performed on mixing molten resins with wood flakes, and on board forming. (NEDO)

Life cycle environmental performance of renewable building materials in the context of residential construction : phase II research report: an extension to the 2005 phase I research report. Module L, Life-cycle inventory of hardwood lumber manufacturing in the Southeastern United States.

Science.gov (United States)

Richard D. Bergman; Scott A. Bowe

2010-01-01

The goal of this study was to gain an understanding of the environmental impact of hardwood lumber production through a gate-to-gate life-cycle inventory (LCI) of hardwood sawmills in the Southeastern United States (SE). Primary mill data were collected per Consortium on Research for Renewable Industrial Materials (CORRIM) Research Guidelines. Life-cycle impact...

Goseki grade and tumour location influence survival of patients with gastric cancer.

Science.gov (United States)

Calik, Muhammet; Calik, Ilknur; Demirci, Elif; Altun, Eren; Gundogdu, Betul; Sipal, Sare; Gundogdu, Cemal

2014-01-01

Owing to the variability of histopathological features and biological behaviour in gastric carcinoma, a great number of categorisation methods such as classical histopathologic grading, Lauren classification, the TNM staging system and the newly presented Goseki grading method are used by pathologists and other scientists. In our study, we aimed to investigate whether Goseki grade and tumour location have an effects on survival of gastric cancer cases. Eighty-four patients with gastric adenocarcinoma were covered in the investigation. The importance of Goseki grading system and tumour location were analysed in addition to the TNM staging and other conventional prognostic parameters. The median survival time in our patients was 35 months (minimum: 5, maximum: 116). According to our findings, there was no relation between survival and tumour size (p=0.192) or classical histological type (p=0.270). In contrast, the Goseki grade and tumour location significantly correlated with survival (p=0.007 and p<0.001, respectively). Additionally, tumours of the intestinal type had a longer median survival time (60.0 months) than diffuse tumours (24.0 months). In addition to the TNM staging system, tumour location and the Goseki grading system may be used as significant prognostic parameters in patients with gastric cancer.

Risk of high-grade cervical dysplasia and cervical cancer in women with systemic lupus erythematosus receiving immunosuppressive drugs.

Science.gov (United States)

Feldman, C H; Liu, J; Feldman, S; Solomon, D H; Kim, S C

2017-06-01

Objective Prior studies suggest an increased risk of cervical cancer among women with systemic lupus erythematosus. However, the relationship with immunosuppressive drugs is not well studied in US nationwide cohorts. We compared the risk of high-grade cervical dysplasia and cervical cancer among women with systemic lupus erythematosus who started immunosuppressive drugs versus hydroxychloroquine. Methods We identified systemic lupus erythematosus patients initiating immunosuppressive drugs or hydroxychloroquine using claims data from two US commercial health plans and Medicaid (2000-2012). We used a validated claims-based algorithm to identify high-grade cervical dysplasia or cervical cancer. To account for potential confounders, including demographic factors, comorbidities, medication use, HPV vaccination status, and health care utilization, immunosuppressive drugs and hydroxychloroquine initiators were 1:1 matched on the propensity score. We used inverse variance-weighted, fixed effect models to pool hazard ratios from the propensity score-matched Medicaid and commercial cohorts. Results We included 2451 matched pairs of immunosuppressive drugs and hydroxychloroquine new users in the commercial cohort and 7690 matched pairs in Medicaid. In the commercial cohort, there were 14 cases of cervical dysplasia or cervical cancer among immunosuppressive drugs users and five cases among hydroxychloroquine users (hazard ratio 2.47, 95% CI 0.89-6.85, hydroxychloroquine = ref). In Medicaid, there were 46 cases among immunosuppressive drugs users and 29 cases in hydroxychloroquine users (hazard ratio 1.24, 95% CI 0.78-1.98, hydroxychloroquine = ref). The pooled hazard ratio of immunosuppressive drugs was 1.40 (95% CI 0.92-2.12). Conclusion Among women with systemic lupus erythematosus, immunosuppressive drugs may be associated with a greater, albeit not statistically significant, risk of high-grade cervical dysplasia and cervical cancer compared to patients receiving

Graded gauge theory

International Nuclear Information System (INIS)

Kerner, R.

1983-01-01

The mathematical background for a graded extension of gauge theories is investigated. After discussing the general properties of graded Lie algebras and what may serve as a model for a graded Lie group, the graded fiber bundle is constructed. Its basis manifold is supposed to be the so-called superspace, i.e. the product of the Minkowskian space-time with the Grassmann algebra spanned by the anticommuting Lorentz spinors; the vertical subspaces tangent to the fibers are isomorphic with the graded extension of the SU(N) Lie algebra. The connection and curvature are defined then on this bundle; the two different gradings are either independent of each other, or may be unified in one common grading, which is equivalent to the choice of the spin-statistics dependence. The Yang-Mills lagrangian is investigated in the simplified case. The conformal symmetry breaking is discussed, as well as some other physical consequences of the model. (orig.)

Interval prediction for graded multi-label classification

CERN Document Server

Lastra, Gerardo; Bahamonde, Antonio

2014-01-01

Multi-label was introduced as an extension of multi-class classification. The aim is to predict a set of classes (called labels in this context) instead of a single one, namely the set of relevant labels. If membership to the set of relevant labels is defined to a certain degree, the learning task is called graded multi-label classification. These learning tasks can be seen as a set of ordinal classifications. Hence, recommender systems can be considered as multi-label classification tasks. In this paper, we present a new type of nondeterministic learner that, for each instance, tries to predict at the same time the true grade for each label. When the classification is uncertain for a label, however, the hypotheses predict a set of consecutive grades, i.e., an interval. The goal is to keep the set of predicted grades as small as possible; while still containing the true grade. We shall see that these classifiers take advantage of the interrelations of labels. The result is that, with quite narrow intervals, i...

Six of one, half a dozen of the other: A measure of multidisciplinary inter/intra-rater reliability of the society for fetal urology and urinary tract dilation grading systems for hydronephrosis.

Science.gov (United States)

Rickard, Mandy; Easterbrook, Bethany; Kim, Soojin; Farrokhyar, Forough; Stein, Nina; Arora, Steven; Belostotsky, Vladamir; DeMaria, Jorge; Lorenzo, Armando J; Braga, Luis H

2017-02-01

The urinary tract dilation (UTD) classification system was introduced to standardize terminology in the reporting of hydronephrosis (HN), and bridge a gap between pre- and postnatal classification such as the Society for Fetal Urology (SFU) grading system. Herein we compare the intra/inter-rater reliability of both grading systems. SFU (I-IV) and UTD (I-III) grades were independently assigned by 13 raters (9 pediatric urology staff, 2 nephrologists, 2 radiologists), twice, 3 weeks apart, to 50 sagittal postnatal ultrasonographic views of hydronephrotic kidneys. Data regarding ureteral measurements and bladder abnormalities were included to allow proper UTD categorization. Ten images were repeated to assess intra-rater reliability. Krippendorff's alpha coefficient was used to measure overall and by grade intra/inter-rater reliability. Reliability between specialties and training levels were also analyzed. Overall inter-rater reliability was slightly higher for SFU (α = 0.842, 95% CI 0.812-0.879, in session 1; and α = 0.808, 95% CI 0.775-0.839, in session 2) than for UTD (α = 0.774, 95% CI 0.715-0.827, in session 1; and α = 0.679, 95% CI 0.605-0.750, in session 2). Reliability for intermediate grades (SFU II/III and UTD 2) of HN was poor regardless of the system. Reliabilities for SFU and UTD classifications among Urology, Nephrology, and Radiology, as well as between training levels were not significantly different. Despite the introduction of HN grading systems to standardize the interpretation and reporting of renal ultrasound in infants with HN, none have been proven superior in allowing clinicians to distinguish between "moderate" grades. While this study demonstrated high reliability in distinguishing between "mild" (SFU I/II and UTD 1) and "severe" (SFU IV and UTD 3) grades of HN, the overall reliability between specialties was poor. This is in keeping with a previous report of modest inter-rater reliability of the SFU system. This drawback is

Prospective Case Series of a Novel Minimally Invasive Bipolar Coagulation System in the Treatment of Grade I and II Internal Hemorrhoids.

Science.gov (United States)

Crawshaw, Benjamin P; Russ, Andrew J; Ermlich, Bridget O; Delaney, Conor P; Champagne, Bradley J

2016-12-01

Background Existing nonsurgical procedures for the treatment of grade I and II internal hemorrhoids are often painful, technically demanding, and often necessitate multiple applications. This study prospectively assessed the safety and efficacy of the HET Bipolar System, a novel minimally invasive device, in the treatment of symptomatic grade I and II internal hemorrhoids. Methods Patients with symptomatic grade I or II internal hemorrhoids despite medical management underwent hemorrhoidal ligation with the HET Bipolar System. Endpoints included resolution or improvement of hemorrhoidal bleeding and/or prolapse from baseline, recurrent or refractory symptoms, and pain. Results Twenty patients were treated with the HET Bipolar System. Two were lost to follow-up. Refractory or recurrent bleeding was present in 8 of 18 (44.4%), 4 of 11 (36.4%), and 4 of 8 (50.0%) patients, and prolapse was reported by 1 of 18 (5.6%), 4 of 11 (36.4%), and 1/7 (14.3%) of patients at 1, 3, and 6 months, respectively. Bleeding improved from baseline in 88.2%, 81.8%, and 87.5% of patients, and resolution of baseline prolapse was seen in 11 of 11 (100%), 4 of 7 (57.1%), and 5 of 5 (100%) patients at the same intervals. Thirteen of 18 (72.2%) patients did not require additional treatment for their symptoms. Conclusions The HET Bipolar System is safe and easy to use with short-term effectiveness comparable to that of currently used techniques for the treatment of symptomatic grade I and II internal hemorrhoids. It may be an effective alternative to rubber band ligation in patients with larger internal hemorrhoids and those with hemorrhoids close to the dentate line in which banding may produce debilitating pain. © The Author(s) 2016.

Teachers' Grading Decision Making

Science.gov (United States)

Isnawati, Ida; Saukah, Ali

2017-01-01

This study investigated teachers' grading decision making, focusing on their beliefs underlying their grading decision making, their grading practices and assessment types, and factors they considered in grading decision making. Two teachers from two junior high schools applying different curriculum policies in grade reporting in Indonesian…

Advanced soft computing diagnosis method for tumour grading.

Science.gov (United States)

Papageorgiou, E I; Spyridonos, P P; Stylios, C D; Ravazoula, P; Groumpos, P P; Nikiforidis, G N

2006-01-01

To develop an advanced diagnostic method for urinary bladder tumour grading. A novel soft computing modelling methodology based on the augmentation of fuzzy cognitive maps (FCMs) with the unsupervised active Hebbian learning (AHL) algorithm is applied. One hundred and twenty-eight cases of urinary bladder cancer were retrieved from the archives of the Department of Histopathology, University Hospital of Patras, Greece. All tumours had been characterized according to the classical World Health Organization (WHO) grading system. To design the FCM model for tumour grading, three experts histopathologists defined the main histopathological features (concepts) and their impact on grade characterization. The resulted FCM model consisted of nine concepts. Eight concepts represented the main histopathological features for tumour grading. The ninth concept represented the tumour grade. To increase the classification ability of the FCM model, the AHL algorithm was applied to adjust the weights of the FCM. The proposed FCM grading model achieved a classification accuracy of 72.5%, 74.42% and 95.55% for tumours of grades I, II and III, respectively. An advanced computerized method to support tumour grade diagnosis decision was proposed and developed. The novelty of the method is based on employing the soft computing method of FCMs to represent specialized knowledge on histopathology and on augmenting FCMs ability using an unsupervised learning algorithm, the AHL. The proposed method performs with reasonably high accuracy compared to other existing methods and at the same time meets the physicians' requirements for transparency and explicability.

Will bottle-grade PET demand lure fiber-grade capacity?

International Nuclear Information System (INIS)

Coeyman, M.

1993-01-01

As demand for bottle-grade polyethylene terephthalate (PET) continues strong and new capacity hastens to meet it, some industry observers wonder if conversions to bottle-grade from fiber-grade capacity will become an industry trend. Taiwan's Nan Ya Plastics was recently said to be considering such a switch, but company sources say it has no such plans. Peter Driscoll, senior partner at PCI Fibres ampersand Raw Materials (Crawley, UK), says that while it is true that demand for the bottle-grade material remains unsatisfied, he doubts that many conversions will take place. You must remember, says Driscoll, that it is not always possible to switch, and that even where it is possible there are limitations

Supporting second grade lower secondary school students’ understanding of linear equation system in two variables using ethnomathematics

Science.gov (United States)

Nursyahidah, F.; Saputro, B. A.; Rubowo, M. R.

2018-03-01

The aim of this research is to know the students’ understanding of linear equation system in two variables using Ethnomathematics and to acquire learning trajectory of linear equation system in two variables for the second grade of lower secondary school students. This research used methodology of design research that consists of three phases, there are preliminary design, teaching experiment, and retrospective analysis. Subject of this study is 28 second grade students of Sekolah Menengah Pertama (SMP) 37 Semarang. The result of this research shows that the students’ understanding in linear equation system in two variables can be stimulated by using Ethnomathematics in selling buying tradition in Peterongan traditional market in Central Java as a context. All of strategies and model that was applied by students and also their result discussion shows how construction and contribution of students can help them to understand concept of linear equation system in two variables. All the activities that were done by students produce learning trajectory to gain the goal of learning. Each steps of learning trajectory of students have an important role in understanding the concept from informal to the formal level. Learning trajectory using Ethnomathematics that is produced consist of watching video of selling buying activity in Peterongan traditional market to construct linear equation in two variables, determine the solution of linear equation in two variables, construct model of linear equation system in two variables from contextual problem, and solving a contextual problem related to linear equation system in two variables.

Grade-Level Retention in Texas Public Schools, 2015-16

Science.gov (United States)

Texas Education Agency, 2017

2017-01-01

This annual report provides information for the 2015-16 school year on grade-level retention in the Texas public school system. Data on retention are provided by student characteristics, including grade level; race/ethnicity; gender; degree of English proficiency; and economic, at-risk, immigrant, migrant, and overage statuses. Data also are…

Effects of Repeated Intraperitoneal Injection of Pharmaceutical-grade and Nonpharmaceutical-grade Corn Oil in Female C57BL/6J Mice.

Science.gov (United States)

Hubbard, Jennifer S; Chen, Patty H; Boyd, Kelli L

2017-11-01

Due to potential adverse effects on animal wellbeing, the use of nonpharmaceutical-grade substances in animal research must be scientifically justified in cases where a pharmaceutical-grade version of the substance exists. This requirement applies to all substances, including vehicles used to solubilize experimental drugs. To date, no studies have evaluated the direct effect of the pharmaceutical classification of a compound on animal wellbeing. In this study, we evaluated intraperitoneal administration of pharmaceutical-grade corn oil, nonpharmaceutical-grade corn oil, and saline in female C57BL/6J mice. Compounds were administered every 48 h for a total of 4 injections. Mice were evaluated clinically by using body weight, body condition score, visual assessment score, CBC, and serum chemistries. Animals were euthanized at 24 h and 14 d after the final injection. Inflammation of the peritoneal wall and mesenteric fat was assessed microscopically by using a semiquantitative scoring system. Saline-dosed groups had lower pathology scores at both time points. At day 21, pharmaceutical-grade corn oil had a significantly higher pathology score compared with nonpharmaceutical-grade corn oil. No other significant differences between the corn oil groups were observed. The use of nonpharmaceutical grade corn oil did not result in adverse clinical consequences and is presumed safe to use for intraperitoneal injection in mice. Differences in inflammation between the 2 groups suggest that the use of either pharmaceutical-grade or nonpharmaceutical-grade corn oil should be consistent within a study.

Investigation of chloride-release of nuclear grade resin in PWR primary system coolant

International Nuclear Information System (INIS)

Cao Xiaoning; Li Yunde; Li Jinghong; Lin Fangliang

1997-01-01

A new preparation technique is developed for making the low-chloride nuclear-grade resin by commercial resin. The chloride remained in nuclear grade resin may release to PWR primary coolant. The amount of released chloride is depended on the concentration of boron, lithium, other anion impurities, and remained chloride concentration in resin

EFFECTS OF PRESS PRESSURE ON GLUE LINE THICKNESS AND PROPERTIES OF LAMINATED VENEER LUMBER GLUED WITH MELAMINE UREA FORMALDEHYDE ADHESIVE

Directory of Open Access Journals (Sweden)

Ramazan Kurt,

2012-07-01

Full Text Available Laminated veneer lumbers (LVLs were manufactured from half-round sliced I-214 hybrid poplar clone veneers with MUF adhesives using press pressures ranging from 2.5 to 15 kg cm-2. The results showed that the press pressures affected the glue line thickness (GLT and the physical and mechanical properties of the LVLs. Higher specific gravity (SG and mechanical properties, but lower GLT were developed as a result of using higher press pressures. The optimum press pressure was found to be 10 kg cm-2 in relation to GLT, SG, and mechanical properties. Significant linear correlations were found between GLT and mechanical properties. GLT can be used to determine the quality of wood bonding and may become a valuable tool for this purpose. Reliable data on the optimum GLT and press pressures can be used to design safe wood bonding applications in all aspects of wood based composites, as well as wood constructions when appropriate techniques are adopted to measure the GLT.

A Cluster Randomized Trial of the Social Skills Improvement System-Classwide Intervention Program (SSIS-CIP) in First Grade

Science.gov (United States)

DiPerna, James Clyde; Lei, Puiwa; Cheng, Weiyi; Hart, Susan Crandall; Bellinger, Jillian

2018-01-01

The purpose of this study was to evaluate the efficacy of a universal social skills program, the Social Skills Improvement System Classwide Intervention Program (SSIS-CIP; Elliott & Gresham, 2007), for students in first grade. Classrooms from 6 elementary schools were randomly assigned to treatment or business-as-usual control conditions.…

Investment opportunity : the FPL low-cost solar dry kiln

Science.gov (United States)

George B. Harpole

1988-01-01

Two equations are presented that may be used to estimate a maximum investment limit and working capital requirements for the FPL low-cost solar dry kiln systems. The equations require data for drying cycle time, green lumber cost, and kiln-dried lumber costs. Results are intended to provide a preliminary estimate.

Hepatobiliary phase images using gadolinium-ethoxybenzyl-diethylenetriamine penta-acetic acid-enhanced MRI as an imaging surrogate for the albumin–bilirubin grading system

Energy Technology Data Exchange (ETDEWEB)

Takatsu, Yasuo, E-mail: pcblue2@yahoo.co.jp [Department of Radiology, Osaka Red Cross Hospital, 5-30 Fudegasaki, Tennouji-ku, Osaka, 543-8555 (Japan); Division of Health Sciences, Graduate School of Medical Sciences, Kanazawa University, 5-11-80 Kodatsuno, Kanazawa, 920-0942 (Japan); Kobayashi, Satoshi, E-mail: satoshik@staff.kanazawa-u.ac.jp [Division of Health Sciences, Graduate School of Medical Sciences, Kanazawa University, 5-11-80 Kodatsuno, Kanazawa, 920-0942 (Japan); Miyati, Tosiaki, E-mail: ramiyati@mhs.mp.kanazawa-u.ac.jp [Division of Health Sciences, Graduate School of Medical Sciences, Kanazawa University, 5-11-80 Kodatsuno, Kanazawa, 920-0942 (Japan); Shiozaki, Toshiki, E-mail: shiozaki.toshiki@gmail.com [Department of Radiology, Osaka Red Cross Hospital, 5-30 Fudegasaki, Tennouji-ku, Osaka, 543-8555 (Japan)

2016-12-15

Objectives: To clarify the correlation between hepatobiliary phase (HBP) images using gadolinium-ethoxybenzyl-diethylenetriamine penta-acetic acid (Gd-EOB-DTPA) and albumin–bilirubin (ALBI) grading system. Materials and methods: We evaluated 220 consecutive patients who underwent liver magnetic resonance imaging with Gd-EOB-DTPA. Quantitative liver–spleen contrast ratio (Q-LSC) was calculated in HBP images approximately 20 min after Gd-EOB-DTPA administration. To evaluate the degree of association between Q-LSC and ALBI grade, the Child–Pugh (C-P) score was used for comparison. Correlation coefficients were calculated, and median Q-LSC values were compared with the C-P scores and ALBI grades. The Steel–Dwass multiple comparison test was used for statistical analysis. Results: The correlation coefficient between Q-LSC and C-P score was −0.35, P < 0.0001, and the ALBI grade was −0.61, P < 0.0001. Q-LSC of overall median, C-P A, B, and C were 1.94, 1.91, 1.96, and 1.33, respectively. The differences between C-P A and C-P B, C-P B and C-P C, and C-P A and C-P C were P = 0.999, 0.126, and 0.149, respectively. Q-LSC of the overall median, ALBI grade 1, 2, and 3 were 1.94, 2.12, 1.69, and 1.30, respectively. The differences between ALBI grades 1 and 2, 2 and 3, and 1 and 3 were P < 0.0001, P = 0.0466, and P = 0.0035, respectively. Q-LSC was better correlated and discriminated by ALBI grade than C-P score. Conclusion: A strong correlation was observed between Q-LSC of an HBP image with Gd-EOB-DTPA and ALBI grade; HBP imaging could be a surrogate for the ALBI grade.

Teaching with the End in Mind: The Role of Standards-Based Grading

Science.gov (United States)

Shippy, Nicole; Washer, Barton A.; Perrin, Billie

2013-01-01

Grading according to standards, competencies, or concepts is nothing new.With the current grading system gaining more scrutiny, parts of the basic framework of how we grade students are being questioned. Stephens (2010) and Marzano and Heflebower (2011) reinforced the notion that homework, behavior, attendance, notebooks, and group work should not…

Evaluating a grading change at UCSD school of medicine: pass/fail grading is associated with decreased performance on preclinical exams but unchanged performance on USMLE step 1 scores.

Science.gov (United States)

McDuff, Susan G R; McDuff, DeForest; Farace, Jennifer A; Kelly, Carolyn J; Savoia, Maria C; Mandel, Jess

2014-06-30

To assess the impact of a change in preclerkship grading system from Honors/Pass/Fail (H/P/F) to Pass/Fail (P/F) on University of California, San Diego (UCSD) medical students' academic performance. Academic performance of students in the classes of 2011 and 2012 (constant-grading classes) were collected and compared with performance of students in the class of 2013 (grading-change class) because the grading policy at UCSD SOM was changed for the class of 2013, from H/P/F during the first year (MS1) to P/F during the second year (MS2). For all students, data consisted of test scores from required preclinical courses from MS1 and MS2 years, and USMLE Step 1 scores. Linear regression analysis controlled for other factors that could be predictive of student performance (i.e., MCAT scores, undergraduate GPA, age, gender, etc.) in order to isolate the effect of the changed grading policy on academic performance. The change in grading policy in the MS2 year only, without any corresponding changes to the medical curriculum, presents a unique natural experiment with which to cleanly evaluate the effect of P/F grading on performance outcomes. After controlling for other factors, the grading policy change to P/F grading in the MS2 year had a negative impact on second-year grades relative to first-year grades (the constant-grading classes performed 1.65% points lower during their MS2 year compared to the MS1 year versus 3.25% points lower for the grading-change class, p < 0.0001), but had no observable impact on USMLE Step 1 scores. A change in grading from H/P/F grading to P/F grading was associated with decreased performance on preclinical examinations but no decrease in performance on the USMLE Step 1 examination. These results are discussed in the broader context of the multitude of factors that should be considered in assessing the merits of various grading systems, and ultimately the authors recommend the continuation of pass-fail grading at UCSD School of Medicine.

Acute renal haemodynamic and renin-angiotensin system responses to graded renal artery stenosis in the dog.

Science.gov (United States)

Anderson, W P; Johnston, C I; Korner, P I

1979-01-01

1. The acute renal haemodynamic and renin-angiotensin system responses to graded renal artery stenosis were studied in chronically instrumented, unanaesthetized dogs. 2. Stenosis was induced over 30 sec by inflation of a cuff around the renal artery to lower distal pressure to 60, 40 or 20 mmHg, with stenosis maintained for 1 hr. This resulted in an immediate fall in renal vascular resistance, but over the next 5--30 min both resistance and renal artery pressure were restored back towards prestenosis values. Only transient increases in systemic arterial blood pressure and plasma renin and angiotensin levels were seen with the two milder stenoses. Despite restoration of renal artery pressure, renal blood flow remained reduced at all grades of stenosis. 3. Pre-treatment with angiotensin I converting enzyme inhibitor or sarosine1, isoleucone8 angiotensin II greatly attenuated or abolished the restoration of renal artery pressure and renal vascular resistance after stenosis, and plasma renin and angiotensin II levels remained high. Renal dilatation was indefinitely maintained, but the normal restoration of resistance and pressure could be simulated by infusing angiotensin II into the renal artery. 4. The effective resistance to blood flow by the stenosis did not remain constant but varied with changes in the renal vascular resistance. PMID:219182

Functionally graded biomimetic energy absorption concept development for transportation systems.

Science.gov (United States)

2014-02-01

Mechanics of a functionally graded cylinder subject to static or dynamic axial loading is considered, including a potential application as energy absorber. The mass density and stiffness are power functions of the radial coordinate as may be the case...

Grading of meningeal solitary fibrous tumors/hemangiopericytomas: analysis of the prognostic value of the Marseille Grading System in a cohort of 132 patients.

Science.gov (United States)

Macagno, Nicolas; Vogels, Rob; Appay, Romain; Colin, Carole; Mokhtari, Karima; Küsters, Benno; Wesseling, Pieter; Figarella-Branger, Dominique; Flucke, Uta; Bouvier, Corinne

2018-03-30

The finding that meningeal solitary fibrous tumors (SFTs) and meningeal hemangiopericytomas (HPCs) are both characterized by NAB2-STAT6 gene fusion has pushed their inclusion in the WHO 2016 Classification of tumors of the central nervous system (CNS) as different manifestations of the same entity. Given that the clinical behavior of the CNS SFT/HPC spectrum ranges from benign to malignant, it is presently unclear whether the grading criteria are still adequate. Here, we present the results of a study that analyzed the prognostic value of an updated version of the Marseille Grading System (MGS) in a retrospectively assembled cohort of 132 primary meningeal SFTs/HPCs with nuclear overexpression of STAT6. The median patient follow-up was 64 months (range 4-274 months); 73 cases (55%) were MGS I, 50 cases (38%) MGS II and 9 cases (7%) were MGS III. Progression-free survival (PFS) and disease-specific survival (DSS) were investigated using univariate analysis: the prognostic factors for PFS included MGS, extent of surgery, radiotherapy, chemotherapy and mitotic activity ≥5/10 high-power field (HPF). Moreover, MGS, radiotherapy, mitotic activity ≥5/10 HPF, and necrosis were the prognostic factors measured for DSS. In multivariate analysis, extent of surgery, mitotic activity ≥5/10 HPF, MGS I and MGS III were the independent prognostic factors measured for PFS while necrosis, MGS III and radiotherapy were the independent prognostic factors for DSS. In conclusion, our results show that assessing the malignancy risk of SFT/HPC should not rely on one single criterion like mitotic activity. Therefore, MGS is useful as it combines the value of different criteria. In particular, the combination of a high mitotic activity and necrosis (MGS III) indicates a particularly poor prognosis. © 2018 International Society of Neuropathology.

Self-tuning control algorithm design for vehicle adaptive cruise control system through real-time estimation of vehicle parameters and road grade