Determination production costs using PBC method

Directory of Open Access Journals (Sweden)

Todić Vladimir V.

2014-01-01

Full Text Available Basic characteristics of modern markets make requirements in quality increasing, decreasing prices and shortening delivery of products. In the middle of this requirements are production costs for whose determination are developed many traditional and alternative methods including PBC method (Process Based Costing. This method enables precisely locating and calculating indirect production costs, and with determined direct costs enables determination of total production costs. This paper shows usage of PBC method for determination production costs for three forms of processing cutting tools.

Valuing productivity costs in a changing macroeconomic environment: the estimation of colorectal cancer productivity costs using the friction cost approach.

Science.gov (United States)

Hanly, Paul; Koopmanschap, Marc; Sharp, Linda

2016-06-01

The friction cost approach (FCA) has been proposed as an alternative to the human capital approach for productivity cost valuation. However, FCA estimates are context dependent and influenced by extant macroeconomic conditions. We applied the FCA to estimate colorectal cancer labor productivity costs and assessed the impact of a changing macroeconomic environment on these estimates. Data from colorectal cancer survivors (n = 159) derived from a postal survey undertaken in Ireland March 2010 to January 2011 were combined with national wage data, population-level survival data, and occupation-specific friction periods to calculate temporary and permanent disability, and premature mortality costs using the FCA. The effects of changing labor market conditions between 2006 and 2013 on the friction period were modeled in scenario analyses. Costs were valued in 2008 euros. In the base-case, the total FCA per-person productivity cost for incident colorectal cancer patients of working age at diagnosis was €8543. In scenario 1 (a 2.2 % increase in unemployment), the fall in the friction period caused total productivity costs to decrease by up to 18 % compared to base-case estimates. In scenario 2 (a 9.2 % increase in unemployment), the largest decrease in productivity cost was up to 65 %. Adjusting for the vacancy rate reduced the effect of unemployment on the cost results. The friction period used in calculating labor productivity costs greatly affects the derived estimates; this friction period requires reassessment following changes in labor market conditions. The influence of changes in macroeconomic conditions on FCA-derived cost estimates may be substantial.

THE COST OF PRODUCTION UNDER DIRECT COSTING AND ABSORPTION COSTING – A COMPARATIVE APPROACH

Directory of Open Access Journals (Sweden)

Bunea-Bontaş Cristina Aurora

2013-04-01

Full Text Available Managerial accounting has an important role in strategic management of a company, being designed especially for managers, in order to optimise their decision regarding operating activities. One of the objectives of managerial accounting is the cost calculation, for measuring inventory costs, and the costs and profitability of products and services. Cost calculation systems can vary in terms of which costs are assigned to cost objects, two significant calculation systems being adopted by the costing theory: full cost accounting, which includes all costs of production as product costs, and partial cost accounting, which includes only those costs that vary with output. This article provides a comparative approach regarding the differences between the calculation of the cost of production under direct costing and absorption costing. It also examines the implication of using each of these calculation systems on the financial position and financial performance of the companies reported on the statement of financial position and the income statement. Finally, the advantages of using direct costing for internal reporting are discussed, considering that this method is not acceptable for external reporting to stockholders and other external users.

Production of solidified high level wastes: a cost comparison of solidification processes

International Nuclear Information System (INIS)

1977-06-01

Differential cost estimates of the annual operating and maintenance costs and the capital costs for five HLW Waste Solidification Alternates were developed. The annual operating and maintenance cost estimates included the cost of labor, consumables, utilities, shipping casks, shipping and disposal at a federal repository. The capital cost included the cost of the component, installation and building. The differential cost estimates do not include equipment and facilities which are either shared with the reprocessing facility or are common between all of the alternates. Total annual cost differential between the five waste form alternates is summarized in tabular form. The Borosilicate Glass Alternate has the lowest total annual cost. The other alternates have higher costs which range from $6.6 M to $7.4 M per year higher than the Glass alternate with the Supercalcine being the highest cost at $7.4 M per year differential. The major items in the cost estimates are then disposal costs in the operating cost estimates and the HLW Storage Tanks in the capital cost estimates. The Supercalcine Multibarrier Alternate ships 180 canisters per year more than the other alternates and consequently has a significantly higher operating cost. However, off-setting this the Supercalcine Multibarrier Alternate does not require HLW Storage Tanks for decay because of the high heat conductivity of this product and correspondingly the capital cost for this alternate is significantly lower than the other alternates. The radiological risk values are correlated with the cost evaluation normalized to cost ($)/MWe-yr

Environmental costs of meat production

DEFF Research Database (Denmark)

Nguyen, T Lan T; Hermansen, John Erik; Mogensen, Lisbeth

2012-01-01

This paper aims to address two questions: First, what is the real cost of meat to society if taking into account the environmental costs arising throughout the product life cycle; and second, whether and how the environmental costs related to meat production can be reduced. In addressing the issues...... to be the main contributor to the costs (55%), followed by global warming (21%) and respiratory inorganics (18%). A viable option combining improvement measures in three aspects: feed use, manure management, and manure utilization, reduces the environmental costs by a factor of 1.4. This results in an equal size......, we use pig meat production in the EU as a case study. The environmental costs of meat are displayed first as characterized results at different midpoint categories e.g. global warming, nature occupation, acidification, eutrophication, ecotoxicity, etc., and then aggregated into a single score using...

Product costing program for wood component manufacturers

Science.gov (United States)

Adrienn Andersch; Urs Buehlmann; Jeff Palmer; Janice K Wiedenbeck; Steve. Lawser

2013-01-01

Accurate and timely product costing information is critically important for companies in planning the optimal utilization of company resources. While an overestimation of product costs can lead to loss of potential business and market share, underestimation of product costs can result in financial losses to the company. This article introduces a product costing program...

The nitrogen cost of food production: Norwegian society

Energy Technology Data Exchange (ETDEWEB)

Azzaroli Bleken, M. [Agricultural Univ. of Norway, Aas (Norway). Dept. of Horticulture and Crop Sciences; Bakken, L.R. [Agricultural Univ. of Norway, Aas (Norway). Dept. of Soil and Water Sciences

1997-05-01

The N-enrichment of the biosphere due to human activities has potential global consequences in enhancing cumulatively, the emission of N{sub 2}O to the atmosphere. This aspect of nitrogen pollution demands a global analysis of the `human nitrogen cycle`. We have used Norway as an example to analyze the nitrogen flows within a society and the dissipation of N to the environment. The present paper concentrates on the food producing sector, which was found to represent the largest N-flow and had the most complex interferences within the nitrogen cycle. The edible products that reach the consumers` mouths account for around 10% of the total N inputs at the primary (plant) production level. The largest N-dissipation occurs in plant production, but the performance of the society as a whole is largely determined by the human diet. The N-cost, defined as the ratio between fertilizer N-input (including animal manure) and the N products, is around 3 for wheat, 14 for dairy products and 21 for meat. The analysis of different mitigation options also reveal the importance of recycling at the highest possible trophic level. Major reductions in the total consumption of N can be obtained by moderate changes towards a more vegetarian diet and better utilization of existing food. In contrast, recycling of waste at the lowest trophic level (compost) is very inefficient. 43 refs, 2 figs, 5 tabs

Modeling the lowest-cost splitting of a herd of cows by optimizing a cost function

Science.gov (United States)

Gajamannage, Kelum; Bollt, Erik M.; Porter, Mason A.; Dawkins, Marian S.

2017-06-01

Animals live in groups to defend against predation and to obtain food. However, for some animals—especially ones that spend long periods of time feeding—there are costs if a group chooses to move on before their nutritional needs are satisfied. If the conflict between feeding and keeping up with a group becomes too large, it may be advantageous for some groups of animals to split into subgroups with similar nutritional needs. We model the costs and benefits of splitting in a herd of cows using a cost function that quantifies individual variation in hunger, desire to lie down, and predation risk. We model the costs associated with hunger and lying desire as the standard deviations of individuals within a group, and we model predation risk as an inverse exponential function of the group size. We minimize the cost function over all plausible groups that can arise from a given herd and study the dynamics of group splitting. We examine how the cow dynamics and cost function depend on the parameters in the model and consider two biologically-motivated examples: (1) group switching and group fission in a herd of relatively homogeneous cows, and (2) a herd with an equal number of adult males (larger animals) and adult females (smaller animals).

17 CFR 229.1204 - (Item 1204) Oil and gas production, production prices and production costs.

Science.gov (United States)

2010-04-01

... production, production prices and production costs. 229.1204 Section 229.1204 Commodity and Securities... production, production prices and production costs. (a) For each of the last three fiscal years disclose... production cost, not including ad valorem and severance taxes, per unit of production. Instruction 1 to Item...

The role of research and development work on the production costs of logging residue chips

International Nuclear Information System (INIS)

Nousiainen, I.

1998-01-01

Purchase of logging residue chips in the early 80s was mainly based on production chains in which the residues were collected with load-carrying tractors at the road-side storage, from which it was chipped or crushed directly into the trailer of a waiting lorry. Six new production chains were developed in the national Bioenergy Research Programme. Three of these are now commercial. Kotimaiset Energiat Pekka Lahti Ky has developed, on the basis of a traditional logging residue production chain, a high-efficiency EVOLUTION intermediate storage chipper, suitable for chipping of logging residues. Oy Logset Ab has developed a new type of lot-chipping chip-harvester, the LOGSET 536C. Nested containers have also been developed for the lot-chipping method. MOHA multi-purpose chipper, in which the chipping and lorry-transportation of chips have been integrated, has also been developed as a part of the research programme. In addition to these, a chipper-container lorry combination, transportation of complete logging residues, and whole- tree skidding have been developed in the project for production of logging residue chips. In the beginning of the 80s the production costs of logging residues at the place of utilization were about 52 FIM/MWh, and the average transportation distance 50 km. In 1992 the production costs, 64 FIM/MWh at the distance of 100 km, was significantly higher than the price of alternative fuels. The lowest production cost level, obtainable by the developed methods is 46 FIM/MWh

On production costs in vertical differentiation models

OpenAIRE

Dorothée Brécard

2009-01-01

In this paper, we analyse the effects of the introduction of a unit production cost beside a fixed cost of quality improvement in a duopoly model of vertical product differentiation. Thanks to an original methodology, we show that a low unit cost tends to reduce product differentiation and thus prices, whereas a high unit cost leads to widen product differentiation and to increase prices

Theoretical study of the lowest-lying electronic states of Aluminium monoiodide

International Nuclear Information System (INIS)

Taher, F.; Kabbani, A.; Ani-El Houte, W.

2004-01-01

Full text.The spectroscopic study of Aluminium monohalides, especially the Aluminium monoiodide, is important for monitoring such species in high temperature fast-flow reactors. Theoretical calculations of AlI are not available, whereas several studies have been done for the other aluminium monohalides. In this work, CAS-SCF/MRCI calculations are performed for the lowest-lying electronic states of AlI in a range of internuclear distance between 2.30 A and 2.80 A. Ab-initio calculations have been effectuated by using the computational chemistry program Molpro. The basis set used in this study for aluminium atom is that used by Langhoff for aluminium monohalides, of contractions using atomic natural orbitals and a pseudopotential is used for iode. Accurate theoretical spectroscopic constants and potential curves are obtained for the ground state X 1 Σ + and the first excited states a 3 Π and A 1 Π. The calculated values of Te, ωe, ωexe and re of these states are compatible with the experimental results. An ordering of states is represented for the lowest five predicted singlet and lowest five predicted triplet states. These results provide a big support to determine the analogy in the ordering of the electronic states in AlF, AlBr and AlI respectively at lower energies. These theoretical results identify a set of electronic singlet and triplet states unobserved experimentally

[Productivity costs of rheumatoid arthritis in Germany. Cost composition and prediction of main cost components].

Science.gov (United States)

Merkesdal, S; Huelsemann, J L; Mittendorf, T; Zeh, S; Zeidler, H; Ruof, J

2006-10-01

Identification of predictors for the productivity cost components: (1) sick leave, and (2) work disability in gainfully employed and (3) impaired household productivity in unemployed patients with rheumatoid arthritis (RA) from the societal perspective. Investigation of productivity costs was linked to a multicenter, randomized, controlled trial evaluating the effectiveness of clinical quality management in 338 patients with RA. The productivity losses were assessed according to the German Guidelines on Health Economic Evaluation. By means of multivariate logistic regression analyses, predictors of sick leave, work disability (employed patients, n=96), and for days confined to bed in unemployed patient (n=242) were determined. Mean annual costs of 970 EUR arose per person taking into consideration all patients (453 EUR sick leave, 63 EUR work disability, 454 EUR impaired productivity of unemployed patients). Disease activity, disease severity, and impaired physical function were global predictors for all of the cost components investigated. Sick leave costs were predicted by prior sick leave periods and the vocational status blue collar worker, work disability costs by sociodemographic variables (marital status, schooling), and the productivity costs of unemployed patients by impaired mental health and impaired physical functions. Interventions such as reduction in disease progression and control of disease activity, early vocational rehabilitation measures and vocational retraining in patients at risk of quitting working life, and self-management programs to learn coping strategies might decrease future RA-related productivity costs.

Measuring the societal burden of cancer: the cost of lost productivity due to premature cancer-related mortality in Europe.

Science.gov (United States)

Hanly, Paul; Soerjomataram, Isabelle; Sharp, Linda

2015-02-15

Every cancer-related death in someone of working age represents an economic loss to society. To inform priorities for cancer control, we estimated costs of lost productivity due to premature cancer-related mortality across Europe, for all cancers and by site, gender, region and country. Cancer deaths in 2008 were obtained from GLOBOCAN for 30 European countries across four regions. Costs were valued using the human capital approach. Years of productive life lost (YPLL) were computed by multiplying deaths between 15 and 64 years by working-life expectancy, then by country-, age- and gender-specific annual wages, corrected for workforce participation and unemployment. Lost productivity costs due to premature cancer-related mortality in Europe in 2008 were €75 billion. Male costs (€49 billion) were almost twice female costs (€26 billion). The most costly sites were lung (€17 billion; 23% of total costs), breast (€7 billion; 9%) and colorectum (€6 billion; 8%). Stomach cancer (in Southern and Central-Eastern Europe) and pancreatic cancer (in Northern and Western Europe) were also among the most costly sites. The average lost productivity cost per cancer death was €219,241. Melanoma had the highest cost per death (€312,798), followed by Hodgkin disease (€306,628) and brain and CNS cancer (€288,850). Premature mortality costs were 0.58% of 2008 European gross domestic product, highest in Central-Eastern Europe (0.81%) and lowest in Northern Europe (0.51%). Premature cancer-related mortality costs in Europe are significant. These results provide a novel perspective on the societal cancer burden and may be used to inform priority setting for cancer control. © 2014 UICC.

FORMALIZING PRODUCT COST DISTORTION: The Impact of Volume-Related Allocation Bases on Cost Information

Directory of Open Access Journals (Sweden)

Johnny Jermias

2003-09-01

Full Text Available The purpose o f this study is to formally analyze product cost distortions resulting from the process of allocating costs to products based on Activity-Based Costing (ABC and the conventional product costing systems. The model developed in this paper rigorously shows the impact of treating costs that are not volume related as if they are. The model demonstrates that the source of product cost distortion is the difference between the proportion of driver used by each product in ABC and the proportion of the base used by the same product in the conventional costing systems. The difference arises because the conventional costing systems ignore the existence of batch-related and product-related costs. The model predicts a positive association between volume and size diversity with product cost distortions. When interaction between volume and size diversity exists, the distortion is either mitigated or exacerbated. The magnitude of the distortion is jointly determined by the size of the differences and the size of the total indirect costs.

Vector Production in an Academic Environment: A Tool to Assess Production Costs

Science.gov (United States)

Boeke, Aaron; Doumas, Patrick; Reeves, Lilith; McClurg, Kyle; Bischof, Daniela; Sego, Lina; Auberry, Alisha; Tatikonda, Mohan

2013-01-01

Abstract Generating gene and cell therapy products under good manufacturing practices is a complex process. When determining the cost of these products, researchers must consider the large number of supplies used for manufacturing and the personnel and facility costs to generate vector and maintain a cleanroom facility. To facilitate cost estimates, the Indiana University Vector Production Facility teamed with the Indiana University Kelley School of Business to develop a costing tool that, in turn, provides pricing. The tool is designed in Microsoft Excel and is customizable to meet the needs of other core facilities. It is available from the National Gene Vector Biorepository. The tool allows cost determinations using three different costing methods and was developed in an effort to meet the A21 circular requirements for U.S. core facilities performing work for federally funded projects. The costing tool analysis reveals that the cost of vector production does not have a linear relationship with batch size. For example, increasing the production from 9 to18 liters of a retroviral vector product increases total costs a modest 1.2-fold rather than doubling in total cost. The analysis discussed in this article will help core facilities and investigators plan a cost-effective strategy for gene and cell therapy production. PMID:23360377

Productivity costs in economic evaluations: past, present, future.

Science.gov (United States)

Krol, Marieke; Brouwer, Werner; Rutten, Frans

2013-07-01

Productivity costs occur when the productivity of individuals is affected by illness, treatment, disability or premature death. The objective of this paper was to review past and current developments related to the inclusion, identification, measurement and valuation of productivity costs in economic evaluations. The main debates in the theory and practice of economic evaluations of health technologies described in this review have centred on the questions of whether and how to include productivity costs, especially productivity costs related to paid work. The past few decades have seen important progress in this area. There are important sources of productivity costs other than absenteeism (e.g. presenteeism and multiplier effects in co-workers), but their exact influence on costs remains unclear. Different measurement instruments have been developed over the years, but which instrument provides the most accurate estimates has not been established. Several valuation approaches have been proposed. While empirical research suggests that productivity costs are best included in the cost side of the cost-effectiveness ratio, the jury is still out regarding whether the human capital approach or the friction cost approach is the most appropriate valuation method to do so. Despite the progress and the substantial amount of scientific research, a consensus has not been reached on either the inclusion of productivity costs in economic evaluations or the methods used to produce productivity cost estimates. Such a lack of consensus has likely contributed to ignoring productivity costs in actual economic evaluations and is reflected in variations in national health economic guidelines. Further research is needed to lessen the controversy regarding the estimation of health-related productivity costs. More standardization would increase the comparability and credibility of economic evaluations taking a societal perspective.

Global patterns of workplace productivity for people with depression: absenteeism and presenteeism costs across eight diverse countries.

Science.gov (United States)

Evans-Lacko, S; Knapp, M

2016-11-01

Depression is a leading cause of disability worldwide. Research suggests that by far, the greatest contributor to the overall economic impact of depression is loss in productivity; however, there is very little research on the costs of depression outside of Western high-income countries. Thus, this study examines the impact of depression on workplace productivity across eight diverse countries. We estimated the extent and costs of depression-related absenteeism and presenteeism in the workplace across eight countries: Brazil, Canada, China, Japan, South Korea, Mexico, South Africa, and the USA. We also examined the individual, workplace, and societal factors associated with lower productivity. To the best of our knowledge, this is the first study to examine the impact of depression on workplace productivity across a diverse set of countries, in terms of both culture and GDP. Mean annual per person costs for absenteeism were lowest in South Korea at $181 and highest in Japan ($2674). Mean presenteeism costs per person were highest in the USA ($5524) and Brazil ($5788). Costs associated with presenteeism tended to be 5-10 times higher than those associated with absenteeism. These findings suggest that the impact of depression in the workplace is considerable across all countries, both in absolute monetary terms and in relation to proportion of country GDP. Overall, depression is an issue deserving much greater attention, regardless of a country's economic development, national income or culture.

Integrated economic and life cycle assessment of thermochemical production of bioethanol to reduce production cost by exploiting excess of greenhouse gas savings

International Nuclear Information System (INIS)

Reyes Valle, C.; Villanueva Perales, A.L.; Vidal-Barrero, F.; Ollero, P.

2015-01-01

Highlights: • Assessment of economics and sustainability of thermochemical ethanol production. • Exploitation of excess CO 2 saving by either importing fossil energy or CO 2 trading. • Significant increase in alcohol production by replacing biomass with natural gas. • CO 2 emission trading is not cost-competitive versus import of fossil energy. • Lowest ethanol production cost for partial oxidation as reforming technology. - Abstract: In this work, two options are investigated to enhance the economics of the catalytic production of bioethanol from biomass gasification by exploiting the excess of CO 2 emission saving: (i) to import fossil energy, in the form of natural gas and electricity or (ii) to trade CO 2 emissions. To this end, an integrated life cycle and economic assessment is carried out for four process configurations, each using a different light hydrocarbon reforming technology: partial oxidation, steam methane reforming, tar reforming and autothermal reforming. The results show that for all process configurations the production of bioethanol and other alcohols significantly increases when natural gas displaces biomass, maintaining the total energy content of the feedstock. The economic advantage of the partial substitution of biomass by natural gas depends on their prices and this is explored by carrying out a sensitivity analysis, taking historical prices into account. It is also concluded that the trade of CO 2 emissions is not cost-competitive compared to the import of natural gas if the CO 2 emission price remains within historical European prices. The CO 2 emission price would have to double or even quadruple the highest CO 2 historical price for CO 2 emission trading to be a cost-competitive option

The ''reference costs'' of the electrical production

International Nuclear Information System (INIS)

1997-05-01

This study objective is to give an aid for the investments choice in the field of electricity production and for national choices in the field of long-dated production. Important evolutions appeared since the last exercise ''reference costs'' of 1993. Electricity production costs, presented in this study, are actualized economic costs. They consider the following production facilities: nuclear, pulverized coal with fumes processing, circulating fluidized bed, combustion turbines, cogeneration and wind turbines. (A.L.B.)

Establishing a cost model when estimating product cost in early design phases

OpenAIRE

Jeppsson, Johanna; Sjöberg, Jessica

2017-01-01

About 75% of the total product cost is determined in the early design phase, which means that the possibilities to affect costs are relatively small when the design phase is completed. For companies, it is therefore vital to conduct reliable cost estimates in the early design phase, when selecting between different design choices. When conducting a cost estimate there are many uncertainties. The aim with this study is therefore to explore how uncertainties regarding product cost can be consid...

Estimating productivity costs using the friction cost approach in practice: a systematic review.

Science.gov (United States)

Kigozi, Jesse; Jowett, Sue; Lewis, Martyn; Barton, Pelham; Coast, Joanna

2016-01-01

The choice of the most appropriate approach to valuing productivity loss has received much debate in the literature. The friction cost approach has been proposed as a more appropriate alternative to the human capital approach when valuing productivity loss, although its application remains limited. This study reviews application of the friction cost approach in health economic studies and examines how its use varies in practice across different country settings. A systematic review was performed to identify economic evaluation studies that have estimated productivity costs using the friction cost approach and published in English from 1996 to 2013. A standard template was developed and used to extract information from studies meeting the inclusion criteria. The search yielded 46 studies from 12 countries. Of these, 28 were from the Netherlands. Thirty-five studies reported the length of friction period used, with only 16 stating explicitly the source of the friction period. Nine studies reported the elasticity correction factor used. The reported friction cost approach methods used to derive productivity costs varied in quality across studies from different countries. Few health economic studies have estimated productivity costs using the friction cost approach. The estimation and reporting of productivity costs using this method appears to differ in quality by country. The review reveals gaps and lack of clarity in reporting of methods for friction cost evaluation. Generating reporting guidelines and country-specific parameters for the friction cost approach is recommended if increased application and accuracy of the method is to be realized.

ECONOMIC ELEMENTS REGARDING THE STEEL COST PRODUCTION COUNTING

OpenAIRE

Adrian IOANA; Nicolae CONSTANTIN; Elena-Claudia DRAGNA; Massimo POLIFRONI

2016-01-01

Our article features the elements that make up the cost of production. The economic activity implies a consumption of factors followed-up by products expressed in goods or services. In the first part of the article, we have defined and detailed the cost of production. In the second part we have calculated the cost of the production of one tone of low alloyed steel with vanadium. The prices for the components of cost production have been established within, Tenaris site, located in Calarasi co...

Economic costs of electricity production in Poland

International Nuclear Information System (INIS)

Beeldman, M.; Solinski, J.

1994-02-01

This study presents a methodology for the calculation of the economic costs of the production of electricity. This methodology is applied to assess electricity production cost in Poland by type of power station for the years 1995 and 2000. In addition, an overview is presented of the methods used by the OECD countries, particularly in the Netherlands. The main conclusions of the study are: 1) the real economic costs to generate electricity in Poland are about two times higher compared with the traditional book-keeping data; 2) the investment costs will become the most important cost component in the near future; and 3) there are considerables differences in production cost per kWh for the different types of power plants in Poland. 4 appendices, 14 refs

Identifying efficient dairy heifer producers using production costs and data envelopment analysis.

Science.gov (United States)

Heinrichs, A J; Jones, C M; Gray, S M; Heinrichs, P A; Cornelisse, S A; Goodling, R C

2013-01-01

During November and December 2011, data were collected from 44 dairy operations in 13 Pennsylvania counties. Researchers visited each farm to collect information regarding management practices and feeding, and costs for labor, health, bedding, and reproduction for replacement heifers from birth until first calving. Costs per heifer were broken up into 4 time periods: birth until weaning, weaning until 6 mo of age, 6 mo of age until breeding age, and heifers from breeding to calving. Milk production records for each herd were obtained from Dairy Herd Improvement. The average number of milking cows on farms in this study was 197.8 ± 280.1, with a range from 38 to 1,708. Total cost averaged $1,808.23 ± $338.62 from birth until freshening. Raising calves from birth to weaning cost $217.49 ± 86.21; raising heifers from weaning age through 6 mo of age cost $247.38 ± 78.89; raising heifers from 6 mo of age until breeding cost $607.02 ± 192.28; and total cost for bred heifers was $736.33 ± 162.86. Feed costs were the largest component of the cost to raise heifers from birth to calving, accounting for nearly 73% of the total. Data envelopment analysis determined that 9 of the 44 farms had no inefficiencies in inputs or outputs. These farms best combined feed and labor investments, spending, on average, $1,137.40 and $140.62/heifer for feed and labor. These heifers calved at 23.7 mo of age and produced 88.42% of the milk produced by older cows. In contrast, the 35 inefficient farms spent $227 more on feed and $78 more on labor per heifer for animals that calved 1.6 mo later and produced only 82% of the milk made by their mature herdmates. Efficiency was attained by herds with the lowest input costs, but herds with higher input costs were also able to be efficient if age at calving was low and milk production was high for heifers compared with the rest of the herd. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Transaction costs and social networks in productivity measurement

DEFF Research Database (Denmark)

Henningsen, Geraldine; Henningsen, Arne; Henning, Christian H. C. A.

2015-01-01

and support. Hence, we use measures of a firm’s access to social networks as a proxy for the transaction costs the firm faces. We develop a microeconomic production model that takes into account transaction costs and networks. Using a data set of 384 Polish farms, we empirically estimate this model......We argue that in the presence of transaction costs, observed productivity measures may in many cases understate the true productivity, as production data seldom distinguish between resources entering the production process and resources of a similar type that are sacrificed for transaction costs....... Hence, both the absolute productivity measures and, more importantly, the productivity ranking will be distorted. A major driver of transaction costs is poor access to information and contract enforcement assistance. Social networks often catalyse information exchange as well as generate trust...

Costs of electronuclear fuel production

International Nuclear Information System (INIS)

Flaim, T.; Loose, V.

1978-07-01

The Los Alamos Scientific Laboratory (LASL) proposes to study the electronuclear fuel producer (EFP) as a means of producing fissile fuel to generate electricity. The main advantage of the EFP is that it may reduce the risks of nuclear proliferation by breeding 233 U from thorium, thereby avoiding plutonium separation. A report on the costs of electronuclear fuel production based upon two designs considered by LASL is presented. The findings indicate that the EFP design variations considered are not likely to result in electricity generation costs as low as the uranium fuel cycle used in the US today. At current estimates of annual fuel output (500 kg 233 U per EFP), the costs of electricity generation using fuel produced by the EFP are more than three times higher than generating costs using the traditional fuel cycle. Sensitivity analysis indicates that electronuclear fuel production would become cost competitive with the traditional uranium fuel cycle when U 3 O 8 (yellowcake) prices approach $1000 per pound

ECONOMIC ELEMENTS REGARDING THE STEEL COST PRODUCTION COUNTING

Directory of Open Access Journals (Sweden)

Adrian IOANA

2016-08-01

Full Text Available Our article features the elements that make up the cost of production. The economic activity implies a consumption of factors followed-up by products expressed in goods or services. In the first part of the article, we have defined and detailed the cost of production. In the second part we have calculated the cost of the production of one tone of low alloyed steel with vanadium. The prices for the components of cost production have been established within, Tenaris site, located in Calarasi county, Romania.

Profitability indicators of milk production cost center in intensive systems of production

Directory of Open Access Journals (Sweden)

Glauber dos Santos

2012-01-01

Full Text Available The objective was to estimate some profitability indicators of dairy cost center farms with a high volume of daily production in feedlot. The Intended was also to identify the components that had the greatest influence on the operational cost. We used data from three milk systems production, with the origin of the purebred Holsteins. It was considered as a milk cost center production all expenses related in lactating and dry cows. The methodology used total cost and operating cost in profitability analysis. A production system, by presenting gross margin, net positive result, was able to produce short, medium and long term. Another production system had a positive gross margin and net, with conditions to survive in the short and medium term. Finally, the third system of production has shown a negative gross margin presenting decapitalizing and entering into debt, as revenues were not enough to pay operating expenses even effective. The component items of the effective operational cost that exercised higher “impact” cost and income from milk were, in decreasing order, the feeding, labor, miscellaneous expenses, sanitation, energy, milking, reproduction, equipment rental, BST and taxes.

Cost Accounting: Production and Equipment Services.

Science.gov (United States)

Schmid, William T.

Cost accounting for audiovisual productions should include direct costs, and, in some cases, the media administrator may have to calculate a per-hour surcharge for general operating overhead as well. Such procedures enable the administrator to determine cost effectiveness, to control cost overruns, and to generate more staff efficiency. Cost…

Production costs for SRIC Populus biomass

International Nuclear Information System (INIS)

Strauss, C.H.

1991-01-01

Production costs for short rotation, intensive culture (SRIC) Populus biomass were developed from commercial-sized plantations under investigation throughout the US. Populus hybrid planted on good quality agricultural sites at a density of 850 cuttings/acre was projected to yield an average of 7 ovendry (OD) tons/acre/year. Discounted cash-flow analysis of multiple rotations showed preharvest production costs of $14/ton (OD). Harvesting and transportation expenses would increase the delivered cost to $35/ton (OD). Although this total cost compared favorably with the regional market price for aspen (Populus tremuloides), future investments in SRIC systems will require the development of biomass energy markets

Productivity Costs in Patients with Refractory Chronic Rhinosinusitis

Science.gov (United States)

Rudmik, Luke; Smith, Timothy L.; Schlosser, Rodney J.; Hwang, Peter H.; Mace, Jess C.; Soler, Zachary M.

2014-01-01

Objective Disease-specific reductions in patient productivity can lead to substantial economic losses to society. The purpose of this study was to: 1) define the annual productivity cost for a patient with refractory chronic rhinosinusitis (CRS) and 2) evaluate the relationship between degree of productivity cost and CRS-specific characteristics. Study Design Prospective, multi-institutional, observational cohort study. Methods The human capital approach was used to define productivity costs. Annual absenteeism, presenteeism, and lost leisure time was quantified to define annual lost productive time (LPT). LPT was monetized using the annual daily wage rates obtained from the 2012 US National Census and the 2013 US Department of Labor statistics. Results A total of 55 patients with refractory CRS were enrolled. The mean work days lost related to absenteeism and presenteeism was 24.6 and 38.8 days per year, respectively. A total of 21.2 household days were lost per year related to daily sinus care requirements. The overall annual productivity cost was $10,077.07 per patient with refractory CRS. Productivity costs increased with worsening disease-specific QoL (r=0.440; p=0.001). Conclusion Results from this study have demonstrated that the annual productivity cost associated with refractory CRS is $10,077.07 per patient. This substantial cost to society provides a strong incentive to optimize current treatment protocols and continue evaluating novel clinical interventions to reduce this cost. PMID:24619604

Productivity costs in patients with refractory chronic rhinosinusitis.

Science.gov (United States)

Rudmik, Luke; Smith, Timothy L; Schlosser, Rodney J; Hwang, Peter H; Mace, Jess C; Soler, Zachary M

2014-09-01

Disease-specific reductions in patient productivity can lead to substantial economic losses to society. The purpose of this study was to: 1) define the annual productivity cost for a patient with refractory chronic rhinosinusitis (CRS) and 2) evaluate the relationship between degree of productivity cost and CRS-specific characteristics. Prospective, multi-institutional, observational cohort study. The human capital approach was used to define productivity costs. Annual absenteeism, presenteeism, and lost leisure time was quantified to define annual lost productive time (LPT). LPT was monetized using the annual daily wage rates obtained from the 2012 U.S. National Census and the 2013 U.S. Department of Labor statistics. A total of 55 patients with refractory CRS were enrolled. The mean work days lost related to absenteeism and presenteeism were 24.6 and 38.8 days per year, respectively. A total of 21.2 household days were lost per year related to daily sinus care requirements. The overall annual productivity cost was $10,077.07 per patient with refractory CRS. Productivity costs increased with worsening disease-specific QoL (r = 0.440; p = 0.001). Results from this study have demonstrated that the annual productivity cost associated with refractory CRS is $10,077.07 per patient. This substantial cost to society provides a strong incentive to optimize current treatment protocols and continue evaluating novel clinical interventions to reduce this cost. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.

Predicting Production Costs for Advanced Aerospace Vehicles

Science.gov (United States)

Bao, Han P.; Samareh, J. A.; Weston, R. P.

2002-01-01

For early design concepts, the conventional approach to cost is normally some kind of parametric weight-based cost model. There is now ample evidence that this approach can be misleading and inaccurate. By the nature of its development, a parametric cost model requires historical data and is valid only if the new design is analogous to those for which the model was derived. Advanced aerospace vehicles have no historical production data and are nowhere near the vehicles of the past. Using an existing weight-based cost model would only lead to errors and distortions of the true production cost. This paper outlines the development of a process-based cost model in which the physical elements of the vehicle are soared according to a first-order dynamics model. This theoretical cost model, first advocated by early work at MIT, has been expanded to cover the basic structures of an advanced aerospace vehicle. Elemental costs based on the geometry of the design can be summed up to provide an overall estimation of the total production cost for a design configuration. This capability to directly link any design configuration to realistic cost estimation is a key requirement for high payoff MDO problems. Another important consideration in this paper is the handling of part or product complexity. Here the concept of cost modulus is introduced to take into account variability due to different materials, sizes, shapes, precision of fabrication, and equipment requirements. The most important implication of the development of the proposed process-based cost model is that different design configurations can now be quickly related to their cost estimates in a seamless calculation process easily implemented on any spreadsheet tool.

Cost-saving production technologies and partial ownership

OpenAIRE

Juan Carlos Barcena-Ruiz; Norma Olaizola

2007-01-01

This work analyzes the incentives to acquire cost-saving production technologies when cross-participation exists at ownership level. We show that cross-participation reduces the incentives to adopt the cost-saving production technology.

Quality costs in the production process

OpenAIRE

J. Michalska

2006-01-01

Purpose: The aim of this paper is showing the relationship of the quality costs with a production process. In this paper it was worked out and introduced the way of marking the documents with regard to the quality costs.Design/methodology/approach: In the frames of own research it has been analysed the quality costs in the production process from the documents marked using the worked out way of marking.Findings: On the basis of the own research it can be stated, that the majority of the eleme...

Vertical integration of local fuel producers into rural district heating systems – Climate impact and production costs

International Nuclear Information System (INIS)

Kimming, M.; Sundberg, C.; Nordberg, Å.; Hansson, P.-A.

2015-01-01

Farmers can use their own agricultural biomass residues for heat production in small-scale systems, enabling synergies between the district heating (DH) sector and agriculture. The barriers to entry into the Swedish heat market were extremely high as long as heat distribution were considered natural monopoly, but were recently lowered due to the introduction of a regulated third party access (TPA) system in the DH sector. This study assesses the potential impact on greenhouse gas emissions and cost-based heat price in the DH sector when farmers vertically integrate into the heat supply chain and introduce more local and agricultural crops and residues into the fuel mix. Four scenarios with various degree of farmer integration, were assessed using life cycle assessment (LCA) methodology, and by analysis of the heat production costs. The results show that full integration of local farm and forest owners in the value chain can reduce greenhouse gas emissions and lower production costs/heat price, if there is an incentive to utilise local and agricultural fuels. The results imply that farmer participation in the DH sector should be encouraged by e.g. EU rural development programmes. - Highlights: • Five DH production systems based on different fuels and ownership were analysed. • Lower GHG emissions were obtained when farmers integrate fully into the DH chain. • Lower heat price was obtained by full vertical integration of farmers. • Salix and straw-based production resulted in the lowest GHG and heat price

Toward the lowest energy consumption and emission in biofuel production: combination of ideal reactors and robust hosts.

Science.gov (United States)

Xu, Ke; Lv, Bo; Huo, Yi-Xin; Li, Chun

2018-04-01

Rising feedstock costs, low crude oil prices, and other macroeconomic factors have threatened biofuel fermentation industries. Energy-efficient reactors, which provide controllable and stable biological environment, are important for the large-scale production of renewable and sustainable biofuels, and their optimization focus on the reduction of energy consumption and waste gas emission. The bioreactors could either be aerobic or anaerobic, and photobioreactors were developed for the culture of algae or microalgae. Due to the cost of producing large-volume bioreactors, various modeling strategies were developed for bioreactor design. The achievement of ideal biofuel reactor relies on not only the breakthrough of reactor design, but also the creation of super microbial factories with highest productivity and metabolic pathway flux. Copyright © 2017 Elsevier Ltd. All rights reserved.

Impact of product configuration systems on product profitability and costing accuracy

DEFF Research Database (Denmark)

Myrodia, Anna; Kristjansdottir, Katrin; Hvam, Lars

2017-01-01

in control of their product assortment, making the right decisions in the sales phase and increasing sales of optimal products. These benefits should have an impact on the company's ability to make more accurate cost estimations in the sales phase, which can positively affect the products’ profitability......This article aims at analyzing the impact of implementing a product configuration system (PCS) on the increased accuracy of the cost calculations and the increased profitability of the products. Companies that have implemented PCSs have achieved substantial benefits in terms of being more...... and after a PCS was implemented. The comparison in the case study revealed that increased accuracy of the cost calculations in the sales phase and consequently increased profitability can be achieved by implementing a PCS....

Lean Manufacturing Implementation: an Approach to Reduce Production Cost

Directory of Open Access Journals (Sweden)

Iraswari

2012-04-01

Full Text Available Abstract: Lean Manufacturing Implementation: An Approach To Reduce Production Cost. Opportunities to improve production processes and reduce production cost through the implementation of lean manufacturing in small medium garment manufacturing are presented in this research. This research shows that there is a possibility of decrease in production cost and increase in return on sales. Lean manufacturing implementation can eliminate waste in the production process. This is a set of techniques for identification and elimination of waste gathered from The Ford Production, Statistical Process Control and other techniques. Improvement of quality could be carried out while time and cost of production are being reduced.

Examining the production costs of antiretroviral drugs.

Science.gov (United States)

Pinheiro, Eloan; Vasan, Ashwin; Kim, Jim Yong; Lee, Evan; Guimier, Jean Marc; Perriens, Joseph

2006-08-22

To present direct manufacturing costs and price calculations of individual antiretroviral drugs, enabling those responsible for their procurement to have a better understanding of the cost structure of their production, and to indicate the prices at which these antiretroviral drugs could be offered in developing country markets. Direct manufacturing costs and factory prices for selected first and second-line antiretroviral drugs were calculated based on cost structure data from a state-owned company in Brazil. Prices for the active pharmaceutical ingredients (API) were taken from a recent survey by the World Health Organization (WHO). The calculated prices for antiretroviral drugs are compared with quoted prices offered by privately-owned, for-profit manufacturers. The API represents the largest component of direct manufacturing costs (55-99%), while other inputs, such as salaries, equipment costs, and scale of production, have a minimal impact. The calculated prices for most of the antiretroviral drugs studied fall within the lower quartile of the range of quoted prices in developing country markets. The exceptions are those drugs, primarily for second-line therapy, for which the API is either under patent, in short supply, or in limited use in developing countries (e.g. abacavir, lopinavir/ritonavir, nelfinavir, saquinavir). The availability of data on the cost of antiretroviral drug production and calculation of factory prices under a sustainable business model provide benchmarks that bulk purchasers of antiretroviral drugs could use to negotiate lower prices. While truly significant price decreases for antiretroviral drugs will depend largely on the future evolution of API prices, the present study demonstrates that for several antiretroviral drugs price reduction is currently possible. Whether or not these reductions materialize will depend on the magnitude of indirect cost and profit added by each supplier over the direct production costs. The ability to

Cost Decision Support in Product Design

NARCIS (Netherlands)

Liebers, A.; Kals, H.J.J.

1997-01-01

The constraints addressed in decision making during product design, process planning and production planning determine the admissible solution space for the manufacture of products. The solution space determines largely the costs that are incurred in the production process. In order to be able to

Modular NanoSat Launcher Design for Lowest Mission Cost, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — As minimum cost will be required for a dedicated NanoSat Launch Vehicle, a series and parallel staged, highly modular vehicle architecture is proposed for design...

Estimated generic prices of cancer medicines deemed cost-ineffective in England: a cost estimation analysis.

Science.gov (United States)

Hill, Andrew; Redd, Christopher; Gotham, Dzintars; Erbacher, Isabelle; Meldrum, Jonathan; Harada, Ryo

2017-01-20

The aim of this study was to estimate lowest possible treatment costs for four novel cancer drugs, hypothesising that generic manufacturing could significantly reduce treatment costs. This research was carried out in a non-clinical research setting using secondary data. There were no human participants in the study. Four drugs were selected for the study: bortezomib, dasatinib, everolimus and gefitinib. These medications were selected according to their clinical importance, novel pharmaceutical actions and the availability of generic price data. Target costs for treatment were to be generated for each indication for each treatment. The primary outcome measure was the target cost according to a production cost calculation algorithm. The secondary outcome measure was the target cost as the lowest available generic price; this was necessary where export data were not available to generate an estimate from our cost calculation algorithm. Other outcomes included patent expiry dates and total eligible treatment populations. Target prices were £411 per cycle for bortezomib, £9 per month for dasatinib, £852 per month for everolimus and £10 per month for gefitinib. Compared with current list prices in England, these target prices would represent reductions of 74-99.6%. Patent expiry dates were bortezomib 2014-22, dasatinib 2020-26, everolimus 2019-25 and gefitinib 2017. The total global eligible treatment population in 1 year is 769 736. Our findings demonstrate that affordable drug treatment costs are possible for novel cancer drugs, suggesting that new therapeutic options can be made available to patients and doctors worldwide. Assessing treatment cost estimations alongside cost-effectiveness evaluations is an important area of future research. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Microalgal CO2 sequestering – Modeling microalgae production costs

International Nuclear Information System (INIS)

Bilanovic, Dragoljub; Holland, Mark; Armon, Robert

2012-01-01

Highlights: ► Microalgae production costs were modeled as a function of specific expenses. ► The effects of uncontrollable expenses/factors were incorporated into the model. ► Modeled microalgae production costs were in the range $102–1503 t −1 ha −1 y −1 . - Abstract: Microalgae CO 2 sequestering facilities might become an industrial reality if microalgae biomass could be produced at cost below $500.00 t −1 . We develop a model for estimation of total production costs of microalgae as a function of known production-specific expenses, and incorporate into the model the effects of uncontrollable factors which affect known production-specific expenses. Random fluctuations were intentionally incorporated into the model, consequently into generated cost/technology scenarios, because each and every logically interconnected equipment/operation that is used in design/construction/operation/maintenance of a production process is inevitably subject to random cost/price fluctuations which can neither be eliminated nor a priori controlled. A total of 152 costs/technology scenarios were evaluated to find 44 scenarios in which predicted total production costs of microalgae (PTPCM) was in the range $200–500 t −1 ha −1 y −1 . An additional 24 scenarios were found with PTCPM in the range of $102–200 t −1 ha −1 y −1 . These findings suggest that microalgae CO 2 sequestering and the production of commercial compounds from microalgal biomass can be economically viable venture even today when microalgae production technology is still far from its optimum.

Preliminary Cost Estimates for Nuclear Hydrogen Production: HTSE System

International Nuclear Information System (INIS)

Yang, K. J.; Lee, K. Y.; Lee, T. H.

2008-01-01

KAERI is now focusing on the research and development of the key technologies required for the design and realization of a nuclear hydrogen production system. As a preliminary study of cost estimates for nuclear hydrogen systems, the hydrogen production costs of the nuclear energy sources benchmarking GTMHR and PBMR are estimated in the necessary input data on a Korean specific basis. G4-ECONS was appropriately modified to calculate the cost for hydrogen production of HTSE (High Temperature Steam Electrolysis) process with VHTR (Very High Temperature nuclear Reactor) as a thermal energy source. The estimated costs presented in this paper show that hydrogen production by the VHTR could be competitive with current techniques of hydrogen production from fossil fuels if CO 2 capture and sequestration is required. Nuclear production of hydrogen would allow large-scale production of hydrogen at economic prices while avoiding the release of CO 2 . Nuclear production of hydrogen could thus become the enabling technology for the hydrogen economy. The major factors that would affect the cost of hydrogen were also discussed

Transaction costs and social networks in productivity measurement

DEFF Research Database (Denmark)

Henningsen, Geraldine; Henningsen, Arne; Henning, Christian H. C. A.

2015-01-01

. Hence, both the absolute productivity measures and, more importantly, the productivity ranking will be distorted. A major driver of transaction costs is poor access to information and contract enforcement assistance. Social networks often catalyse information exchange as well as generate trust...... and support. Hence, we use measures of a firm’s access to social networks as a proxy for the transaction costs the firm faces. We develop a microeconomic production model that takes into account transaction costs and networks. Using a data set of 384 Polish farms, we empirically estimate this model...... and compare different parametric, semiparametric, and nonparametric model specifications. Our results generally support our hypothesis. Especially, large trading networks and dense household networks have a positive influence on a farm’s productivity. Furthermore, our results indicate that transaction costs...

Estimating the cost of production stoppage

Science.gov (United States)

Delionback, L. M.

1979-01-01

Estimation model considers learning curve quantities, and time of break to forecast losses due to break in production schedule. Major parameters capable of predicting costs are number of units made prior to production sequence, length of production break, and slope of learning curve produced prior to break.

Nuclear costs: indicators and uncertainties

International Nuclear Information System (INIS)

Leveque, Francois

2013-01-01

In order to identify whether it is better to build a gas plant, a nuclear plant or a wind farm, to identify the technology leading to the lowest KWh cost, to identify under which conditions nuclear production is profitable for a private investor, and to identify whether taking the dismantling cost and the waste storage cost into account modifies the nuclear competitiveness with respect to general interest, the author first discusses the different costs of the nuclear sector, their sensitivity to different factors. In a second part, he proposes a retrospective discussion of cost dynamics. Then, as nuclear technology seems characterized by always increasing costs, and as this trend may last, notably because of safety concerns, the author proposes an analysis of the poor competitiveness of nuclear with respect to its cost

CONSOLIDATED COST ACCOUNTING AT MEAT AND FAT PRODUCTION: METHODOLOGY AND PRACTICE

Directory of Open Access Journals (Sweden)

Volodymyr Kushnir

2017-08-01

Full Text Available Aim of the article is to study and improve methods of consolidated cost accounting at meat and fat production to obtain detailed information about production costs and to find ways to reduce the cost of meat production. It is offered to account expenses at meat and fat department for individual production areas that will receive detailed information for the purposes of control, analysis, calculation and reporting. For expedient budgeting activities of each structural unit of meat and fat production and for needs to saving production is proposed to reflect the costs of each production plant to separate groups of analytical accounts. Key words: consolidated accounting, production costs of meat and fat production, cost accounting.

Some regional costs of a synthetic fuel industry: The case of illinois

Science.gov (United States)

Attanasi, E.D.; Green, E.K.

1981-01-01

The Federal Government's efforts to induce development of a coal-based synthetic fuel industry include direct subsidies, tax concessions, and assurances that it will purchase the industry's output, even if above the market price. In this note it is argued that these subsidies will enable this industry to secure a region's largest and lowest-cost coal deposits and that the costs imposed on other coal users will be substantial. Moreover, because the lowest-cost coal deposits will be committed to synthetic fuels production regardless of the industry's commercial viability, distortions in regional coal markets will develop. If economic efficiency requires that the price of the resource reflect its replacement value, then a State government is justified in imposing a tax on coal destined for subsidized synthetic fuel plants. Amounts of such a tax, based on the higher costs of coal that must be accepted by other users as the result of the subsidized synthetic fuel plants' preempting the largest and lowest-cost deposits, are estimated for the case of Illinois strippable coal. ?? 1981 Annals of Regional Science.

Cost allocation. Combined heat and power production

International Nuclear Information System (INIS)

Sidzikauskas, V.

2002-01-01

The benefits of Combined Heat and Power (CHP) generation are discussed. The include improvement in energy intensity of 1% by 2010, 85-90% efficiency versus 40-50% of condensation power and others. Share of CHP electricity production in ERRA countries is presented.Solutions for a development CHP cost allocation are considered. Conclusion are presented for CHP production cost allocation. (R.P.)

Cost Estimates Of Concentrated Photovoltaic Heat Sink Production

Science.gov (United States)

2016-06-01

PV), return on investment (ROI) 15. NUMBER OF PAGES 59 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT Unclassified 18. SECURITY...improvements increase overall system returns on investment and 11 provide pathways for further reduction in system costs (Phillips et al., 2015). Phillips...generation. As the CPV market has matured, production costs have come down to near flat-panel photovoltaic (PV) production costs. CPV units

COST OF PRODUCTION, GROSS RETURN AND NET PROFIT IN COMMERCIAL EGG PRODUCTION

Directory of Open Access Journals (Sweden)

M. Farooq, Zahoor-ul-Haq1, M.A. Mian, F.R. Durrani and M. Syed

2003-01-01

Full Text Available The present study was carried out in Chakwal, Pakistan by collecting data from randomly selected 109 flocks to investigate cost of production, gross return and net profit per layer. Majority of the buildings in the study area were rented therefore, rent per layer was added to the total cost of production instead of depreciation on building and equipments. Overall total cost of production, gross return and net profit per layer was Rs. 393.88 ± 5.36, 432.14 ± 8.01 and 38.26 ± 6.66, respectively. Rate of return over the invested capital was 27%. Mean feed cost per layer was Rs. 302.23 ± 5.01, including Rs. 10.27 ± 0.24, 29.19 ± 0.42 and 262.77 ± 5.08 for starter, grower and layer ration, respectively. Feed cost was the major component contributing 76.73% to the total cost of production. Average cost of labor, day-old chick, building rent, vaccination, therapy, miscellaneous item, electricity, bedding material and transportation was Rs. 19.90 ± 0.45, 19.75 ± 0.05, 16.25 ± 0.26, 12.80 ± 0.10, 10.90 ± 2.32, 4.35 ± 0.09, 3.15 ± 0.07, 2.65 ± 0.09 and 1.90 ± 0.08, respectively, contributing 5.05, 5.01, 4.13, 3.25, 2.77, 1.10, 0.80, 0.67 and 0.48 % to the total cost of production. Gross return from the sale of marketable eggs, culled eggs, spent/culled bird, empty bags and manure was Rs. 388.84 ± 7.91, 3.85 ± 0.01, 35.80 ± 0.23, 2.20 ± 0.04 and 1.45 ± 0.01, respectively, contributing 89.98, 0.89, 8.28, 0.51 and 0.34% to the total return. Determining the effect of different parameters on the cost of production and net profit, large flocks, Hisex strain, brood-grow and lay system of rearing, good hygienic conditions of the farm, normal stocking rate and cage system of housing wee found to give maximum gross return as well as net profit.

77 FR 7237 - Railroad Cost Recovery Procedures-Productivity Adjustment

Science.gov (United States)

2012-02-10

... Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board. ACTION: Proposed railroad cost recovery procedures productivity adjustment. SUMMARY: In a decision served on... productivity for the 2006-2010 (5-year) averaging period. This represents a 0.6% decrease over the average for...

78 FR 10262 - Railroad Cost Recovery Procedures-Productivity Adjustment

Science.gov (United States)

2013-02-13

... Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board, DOT. ACTION: Proposed railroad cost recovery procedures productivity adjustment. SUMMARY: In a decision served on... productivity for the 2007-2011 (5-year) averaging period. This represents a 0.1% increase over the average for...

Comparison of fuel production costs for future transportation

DEFF Research Database (Denmark)

Ridjan, Iva; Mathiesen, Brian Vad; Connolly, David

The purpose of this poster is to provide an overview of fuel production costs for two types of synthetic fuels – methanol and methane, along with comparable costs for first and second generation biodiesel, two types of second generation bioethanol, and biogas. The model analysed is a 100% renewable...... scenario of Denmark for 2050, where the data for the transport sector has been changed to estimate the fuel production costs for eight different fuel pathways....

75 FR 16575 - Railroad Cost Recovery Procedures-Productivity Adjustment

Science.gov (United States)

2010-04-01

...)] Railroad Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board. ACTION: Adoption of a railroad cost recovery procedures productivity adjustment. SUMMARY: By decision served on February 1, 2010, the Board proposed to adopt 1.010 (1.0% per year) as the 2008 productivity adjustment, as...

75 FR 5170 - Railroad Cost Recovery Procedures-Productivity Adjustment

Science.gov (United States)

2010-02-01

...)] Railroad Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board, DOT. ACTION: Proposed Railroad Cost Recovery Procedures Productivity Adjustment. SUMMARY: In a decision served... railroad productivity for the 2004-2008 (5-year) averaging period. This is a decline of 0.5 of a percentage...

A roadmap for cost-of-goods planning to guide economic production of cell therapy products.

Science.gov (United States)

Lipsitz, Yonatan Y; Milligan, William D; Fitzpatrick, Ian; Stalmeijer, Evelien; Farid, Suzanne S; Tan, Kah Yong; Smith, David; Perry, Robert; Carmen, Jessica; Chen, Allen; Mooney, Charles; Fink, John

2017-12-01

Cell therapy products are frequently developed and produced without incorporating cost considerations into process development, contributing to prohibitively costly products. Herein we contextualize individual process development decisions within a broad framework for cost-efficient therapeutic manufacturing. This roadmap guides the analysis of cost of goods (COG) arising from tissue procurement, material acquisition, facility operation, production, and storage. We present the specific COG considerations related to each of these elements as identified through a 2013 International Society for Cellular Therapy COG survey, highlighting the differences between autologous and allogeneic products. Planning and accounting for COG at each step in the production process could reduce costs, allowing for more affordable market pricing to improve the long-term viability of the cell therapy product and facilitate broader patient access to novel and transformative cell therapies. Copyright © 2017 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

Activity-based costing evaluation of [18F]-fludeoxyglucose production.

Science.gov (United States)

Krug, Bruno; Van Zanten, Annie; Pirson, Anne-Sophie; Crott, Ralph; Vander Borght, Thierry

2008-01-01

As healthcare expenses are escalating in many countries, the sector faces a new challenge of becoming more cost efficient. There is an urgent need for more accurate data on the costs of healthcare procedures. The cost of Positron Emission Tomography (PET) with [(18)F]-fludeoxyglucose ((18)F-FDG) studies is mainly influenced by the price of the radiopharmaceutical, which may vary throughout Europe from 300 to 500 Euro per patient dose (370 MBq). The aim of the current study is to conduct an activity-based costing (ABC) estimation of (18)F-FDG production in Europe to better identify the different cost components and to analyse their relative contribution to the total cost. Financial data were collected on capital expense and global operating costs through interviews with industry experts, PET centre managers, evaluation of prior studies, and review of expenses incurred at the University Medical Centre in Groningen (The Netherlands). After mapping the activities, we divided the cost in five categories: wage, equipment, consumables, overhead and space costs. A sensitivity analysis was performed for key cost components, including the compliance with regulatory requirements. The critical factor for profitability was throughput. Including the European regulation procedure, the cost for 370 MBq (18)F-FDG patient dose, 3 h EOS without delivery cost, ranges between 155 and 177 Euro/dose for two production runs and between 210 and 237 Euro/dose for one production run. These costs are predominantly determined by personnel and equipment costs, although the cost for quality assurance increases steadily. The ABC analysis provides significant insight into the production cost components of (18)F-FDG through different operating configurations. Reductions in equipment prices, increased availability of radiopharmaceuticals, growth in demand, and improvements in reimbursement will all contribute to the financial viability of this imaging technique.

Activity-based costing evaluation of [18F]-fludeoxyglucose production

International Nuclear Information System (INIS)

Krug, Bruno; Pirson, Anne-Sophie; Borght, Thierry vander; Zanten, Annie van; Crott, Ralph

2008-01-01

As healthcare expenses are escalating in many countries, the sector faces a new challenge of becoming more cost efficient. There is an urgent need for more accurate data on the costs of healthcare procedures. The cost of Positron Emission Tomography (PET) with [ 18 F]-fludeoxyglucose ( 18 F-FDG) studies is mainly influenced by the price of the radiopharmaceutical, which may vary throughout Europe from 300 to 500 Euro per patient dose (370 MBq). The aim of the current study is to conduct an activity-based costing (ABC) estimation of 18 F-FDG production in Europe to better identify the different cost components and to analyse their relative contribution to the total cost. Financial data were collected on capital expense and global operating costs through interviews with industry experts, PET centre managers, evaluation of prior studies, and review of expenses incurred at the University Medical Centre in Groningen (The Netherlands). After mapping the activities, we divided the cost in five categories: wage, equipment, consumables, overhead and space costs. A sensitivity analysis was performed for key cost components, including the compliance with regulatory requirements. The critical factor for profitability was throughput. Including the European regulation procedure, the cost for 370 MBq 18 F-FDG patient dose, 3 h EOS without delivery cost, ranges between 155 and 177 Euro/dose for two production runs and between 210 and 237 Euro/dose for one production run. These costs are predominantly determined by personnel and equipment costs, although the cost for quality assurance increases steadily. The ABC analysis provides significant insight into the production cost components of 18 F-FDG through different operating configurations. Reductions in equipment prices, increased availability of radiopharmaceuticals, growth in demand, and improvements in reimbursement will all contribute to the financial viability of this imaging technique. (orig.)

The model for estimation production cost of embroidery handicraft

Science.gov (United States)

Nofierni; Sriwana, IK; Septriani, Y.

2017-12-01

Embroidery industry is one of type of micro industry that produce embroidery handicraft. These industries are emerging in some rural areas of Indonesia. Embroidery clothing are produce such as scarves and clothes that show cultural value of certain region. The owner of an enterprise must calculate the cost of production before making a decision on how many products are received from the customer. A calculation approach to production cost analysis is needed to consider the feasibility of each order coming. This study is proposed to design the expert system (ES) in order to improve production management in the embroidery industry. The model will design used Fuzzy inference system as a model to estimate production cost. Research conducted based on survey and knowledge acquisitions from stakeholder of supply chain embroidery handicraft industry at Bukittinggi, West Sumatera, Indonesia. This paper will use fuzzy input where the quality, the complexity of the design and the working hours required and the result of the model are useful to manage production cost on embroidery production.

Updating Linear Schedules with Lowest Cost: a Linear Programming Model

Science.gov (United States)

Biruk, Sławomir; Jaśkowski, Piotr; Czarnigowska, Agata

2017-10-01

Many civil engineering projects involve sets of tasks repeated in a predefined sequence in a number of work areas along a particular route. A useful graphical representation of schedules of such projects is time-distance diagrams that clearly show what process is conducted at a particular point of time and in particular location. With repetitive tasks, the quality of project performance is conditioned by the ability of the planner to optimize workflow by synchronizing the works and resources, which usually means that resources are planned to be continuously utilized. However, construction processes are prone to risks, and a fully synchronized schedule may expire if a disturbance (bad weather, machine failure etc.) affects even one task. In such cases, works need to be rescheduled, and another optimal schedule should be built for the changed circumstances. This typically means that, to meet the fixed completion date, durations of operations have to be reduced. A number of measures are possible to achieve such reduction: working overtime, employing more resources or relocating resources from less to more critical tasks, but they all come at a considerable cost and affect the whole project. The paper investigates the problem of selecting the measures that reduce durations of tasks of a linear project so that the cost of these measures is kept to the minimum and proposes an algorithm that could be applied to find optimal solutions as the need to reschedule arises. Considering that civil engineering projects, such as road building, usually involve less process types than construction projects, the complexity of scheduling problems is lower, and precise optimization algorithms can be applied. Therefore, the authors put forward a linear programming model of the problem and illustrate its principle of operation with an example.

Time Domain Partitioning of Electricity Production Cost Simulations

Energy Technology Data Exchange (ETDEWEB)

Barrows, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hummon, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jones, W. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hale, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2014-01-01

Production cost models are often used for planning by simulating power system operations over long time horizons. The simulation of a day-ahead energy market can take several weeks to compute. Tractability improvements are often made through model simplifications, such as: reductions in transmission modeling detail, relaxation of commitment variable integrality, reductions in cost modeling detail, etc. One common simplification is to partition the simulation horizon so that weekly or monthly horizons can be simulated in parallel. However, horizon partitions are often executed with overlap periods of arbitrary and sometimes zero length. We calculate the time domain persistence of historical unit commitment decisions to inform time domain partitioning of production cost models. The results are implemented using PLEXOS production cost modeling software in an HPC environment to improve the computation time of simulations while maintaining solution integrity.

An Empirical Study of Strategic Positioning and Production Efficiency

OpenAIRE

Hsihui Chang; Guy D. Fernando; Arindam Tripathy

2015-01-01

We examine the relationship between strategic positioning of firms and their production efficiency. Firms with competitive advantages based on either cost leadership or differentiation are able to outperform their competitors. Firms pursuing a cost leadership strategy seek to be the lowest cost producer, primarily by minimizing inputs for a given level of output, thus concentrating on increasing the efficiency of their production processes. On the other hand, firms that pursue a differentiat...

Environmental costs of fossil fuel energy production

International Nuclear Information System (INIS)

Riva, A.; Trebeschi, C.

1997-01-01

The costs of environmental impacts caused by fossil fuel energy production are external to the energy economy and normally they are not reflected in energy prices. To determine the environmental costs associated with an energy source a detailed analysis of all environmental impacts of the complete energy cycle is required. The economic evaluation of environmental damages is presented caused by atmospheric emissions produced by fossil fuel combustion for different uses. Considering the emission factors of sulphur oxides, nitrogen oxides, dust and carbon dioxide and the economic evaluation of their environmental damages reported in literature, a range of environmental costs associated with different fossil fuels and technologies is presented. A comparison of environmental costs resulting from atmospheric emissions produced by fossil-fuel combustion for energy production shows that natural gas has a significantly higher environmental value than other fossil fuels. (R.P.)

Methodological aspects of accounting production cost of public sector entities

Directory of Open Access Journals (Sweden)

Людмила Геннадіївна Ловінська

2015-09-01

Full Text Available The necessity of obtaining objective information about the activities of the public sector in various areas of the production is defined. It is proved an expediency of development the Project of «Guidelines for the structure of production costs» on the basis of the approved in the public sector NP(SAPS 135 "Costs". The need for accounting costs by type of activity (operational, financial and investment is marked. The composition of production costs is defined

Innovation in product design as a factor for reducing logistic and production costs

Directory of Open Access Journals (Sweden)

Luciana Fighera Marzall

2016-03-01

Full Text Available Innovation has been considered of fundamental importance for organizations competing in dynamic environments, which along with cost management has been shown as an organizational strategy that allows the company to measure its results and implement measures that impact on the organization's performance as a whole. This paper, carried out in a metal mechanical industry of a telecommunications engineering branch, aims to analyse cost reduction in logistics raw materials areas through innovation in the product design, which are antennas and towers for telephone networks. In terms of methodology, this study presents itself as a qualitative and quantitative research-action, which from the link between theory and practice allows for intervention in the middle of the researchers studied. As a result, an innovative project was developed, which allowed for the reduction costs of production by 68% and logistics by 32%. Despite the significant decrease in costs, the quality of manufactured products not declined and customer needs were met, thus making the company more competitive against competitors. Not widespread in the literature, this analysis of the impact on logistics and production costs due to improvements in the project is the main contribution theoretical of this paper.

Electromagnetic structure of the lowest-lying decuplet resonances in covariant chiral perturbation theory

International Nuclear Information System (INIS)

Geng, L. S.; Camalich, J. Martin; Vacas, M. J. Vicente

2009-01-01

We present a calculation of the leading SU(3)-breaking O(p 3 ) corrections to the electromagnetic moments and charge radius of the lowest-lying decuplet resonances in covariant chiral perturbation theory. In particular, the magnetic dipole moment of the members of the decuplet is predicted fixing the only low-energy constant (LEC) present up to this order with the well-measured magnetic dipole moment of the Ω - . We predict μ Δ ++ =6.04(13) and μ Δ + =2.84(2), which agree well with the current experimental information. For the electric quadrupole moment and the charge radius, we use state-of-the-art lattice QCD results to determine the corresponding LECs, whereas for the magnetic octupole moment there is no unknown LEC up to the order considered here, and we obtain a pure prediction. We compare our results with those reported in large N c , lattice QCD, heavy-baryon chiral perturbation theory, and other models.

Liberalised electricity markets, new bioenergy technologies, and GHG emission reductions: interactions and CO2 mitigation costs

International Nuclear Information System (INIS)

Gustavsson, L.; Madlener, R.

1999-01-01

We contrast recent developments in power and heat production with bioenergy, and natural-gas-fired condensing plants with and without decarbonisation, in the light of electricity market liberalisation. Our main focus is on CO 2 mitigation costs and carbon tax sensitivity of production costs. We find that CO 2 mitigation costs are lower for biomass systems using IGCC technology than for natural gas system using decarbonisation. However, based on current fuel prices natural-gas fired co-generation plants have the lowest production costs. Hence energy policy measures will be needed to promote biomass technologies and decarbonisation options on a liberalised market. (author)

Workplace smoking related absenteeism and productivity costs in Taiwan.

Science.gov (United States)

Tsai, S P; Wen, C P; Hu, S C; Cheng, T Y; Huang, S J

2005-06-01

To estimate productivity losses and financial costs to employers caused by cigarette smoking in the Taiwan workplace. The human capital approach was used to calculate lost productivity. Assuming the value of lost productivity was equal to the wage/salary rate and basing the calculations on smoking rate in the workforce, average days of absenteeism, average wage/salary rate, and increased risk and absenteeism among smokers obtained from earlier research, costs due to smoker absenteeism were estimated. Financial losses caused by passive smoking, smoking breaks, and occupational injuries were calculated. Using a conservative estimate of excess absenteeism from work, male smokers took off an average of 4.36 sick days and male non-smokers took off an average of 3.30 sick days. Female smokers took off an average of 4.96 sick days and non-smoking females took off an average of 3.75 sick days. Excess absenteeism caused by employee smoking was estimated to cost USD 178 million per annum for males and USD 6 million for females at a total cost of USD 184 million per annum. The time men and women spent taking smoking breaks amounted to nine days per year and six days per year, respectively, resulting in reduced output productivity losses of USD 733 million. Increased sick leave costs due to passive smoking were approximately USD 81 million. Potential costs incurred from occupational injuries among smoking employees were estimated to be USD 34 million. Financial costs caused by increased absenteeism and reduced productivity from employees who smoke are significant in Taiwan. Based on conservative estimates, total costs attributed to smoking in the workforce were approximately USD 1032 million.

Historical plant cost and annual production expenses for selected electric plants, 1982

International Nuclear Information System (INIS)

1984-01-01

This publication is a composite of the two prior publications, Hydroelectric Plant Construction Cost and Annual Production Expenses and Thermal-Electric Plant Construction Cost and Annual Production Expenses. Beginning in 1979, Thermal-Electric Plant Construction Cost and Annual Production Expenses contained information on both steam-electric and gas-turbine electric plant construction cost and annual production expenses. The summarized historical plant cost described under Historical Plant Cost in this report is the net cumulative-to-date actual outlays or expenditures for land, structures, and equipment to the utility. Historical plant cost is the initial investment in plant (cumulative to the date of initial commercial operation) plus the costs of all additions to the plant, less the value of retirements. Thus, historical plant cost includes expenditures made over several years, as modifications are made to the plant. Power Production Expenses is the reporting year's plant operation and maintenance expenses, including fuel expenses. These expenses do not include annual fixed charges on plant cost (capital costs) such as interest on debt, depreciation or amortization expenses, and taxes. Consequently, total production expenses and the derived unit costs are not the total cost of producing electric power at the various plants. This publication contains data on installed generating capacity, net generation, net capability, historical plant cost, production expenses, fuel consumption, physical and operating plant characteristics, and other relevant statistical information for selected plants

Operational costs induced by fluctuating wind power production in Germany and Scandinavia

Energy Technology Data Exchange (ETDEWEB)

Meibom, P. [Risoe National Lab., DTU, System Analysis Dept., Roskilde (Denmark); Weber, C. [Univ. Duisburg-Essen, Chai og Energy Management (Germany); Barth, R.; Brand, H. [Univ. of Stuttgart, Inst. of Energy Economics and the Rational Use of Energy (Germany)

2007-05-15

Adding wind power generation in a power system changes the operational patterns of the existing units due to the variability and unpredictability of wind power production. For large amounts of wind power production the expectation is that the operational costs of the other power plants will increase due to more operation time in part-load and more start-ups. The change in operational costs induced by the wind power production can only be calculated by comparing the operational costs in two power system configurations: with wind power production and with alternative production having properties like conventional production, i.e. being predictable and less variable. The choice of the characteristics of the alternative production is not straight forward and will therefore influence the operational costs induced by wind power production. This paper presents a method for calculating the change in operational costs due to wind power production using a stochastic optimization model covering the power systems in Germany and the Nordic countries. Two cases of alternative production are used to calculate the change in operational costs namely perfectly predictable wind power production enabling calculation of the costs connected to unpredictability, and constant wind power production enabling calculation of the operational costs connected to variability of wind power production. A 2010 case with three different wind power production penetration levels is analysed in the paper. (au)

Space system production cost benefits from contemporary philosophies in management and manufacturing

Science.gov (United States)

Rosmait, Russell L.

1991-01-01

The cost of manufacturing space system hardware has always been expensive. The Engineering Cost Group of the Program Planning office at Marshall is attempting to account for cost savings that result from new technologies in manufacturing and management. The objective is to identify and define contemporary philosophies in manufacturing and management. The seven broad categories that make up the areas where technological advances can assist in reducing space system costs are illustrated. Included within these broad categories is a list of the processes or techniques that specifically provide the cost savings within todays design, test, production and operations environments. The processes and techniques listed achieve savings in the following manner: increased productivity; reduced down time; reduced scrap; reduced rework; reduced man hours; and reduced material costs. In addition, it should be noted that cost savings from production and processing improvements effect 20 to 40 pct. of production costs whereas savings from management improvements effects 60 to 80 of production cost. This is important because most efforts in reducing costs are spent trying to reduce cost in the production.

Operational costs induced by fluctuating wind power production in Germany and Scandinavia

DEFF Research Database (Denmark)

Meibom, Peter; Weber, C.; Barth, R.

2009-01-01

Adding wind power generation in a power system changes the operational patterns of the existing units due to the variability and partial predictability of wind power production. For large amounts of wind power production, the expectation is that the specific operational costs (fuel costs, start......-up costs, variable operation and maintenance costs, costs of consuming CO2 emission permits) of the other power plants will increase due to more operation time in part-load and more start-ups. The change in operational costs induced by the wind power production can only be calculated by comparing...... the operational costs in two power system configurations: with wind power production and with alternative wind production having properties such as conventional production, that is, being predictable and less variable. The choice of the characteristics of the alternative production is not straightforward...

Assessing the cost saving potential of shared product architectures

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hansen, Christian Lindschou; Løkkegaard, Martin

2016-01-01

company. Experiences from the case company show it is possible to reduce the number of architectures with 60% which leads to significant reduction in direct material and labor costs. This can be achieved without compromising the market offerings of products. Experiences from the case study indicate cost......This article presents a method for calculating cost savings of shared architectures in industrial companies called Architecture Mapping and Evaluation. The main contribution is an operational method to evaluate the cost potential and evaluate the number of product architectures in an industrial...

Fixed export costs and multi-product firms

NARCIS (Netherlands)

Creusen, H.; Smeets, R.

2011-01-01

This paper has two aims. First, we uncover some salient components of fixed export costs, which play a crucial role in recent heterogeneous firms models of international trade. Second, we investigate whether the importance of these fixed export costs varies with the size of a firms export product

76 FR 64879 - Deduction for Qualified Film and Television Production Costs

Science.gov (United States)

2011-10-19

... Deduction for Qualified Film and Television Production Costs AGENCY: Internal Revenue Service (IRS... regulations relating to deductions for the costs of producing film and television productions. Those temporary... production costs. (a) * * * (1) * * * (ii) [The text of this proposed amendment to Sec. 1.181- 1(a)(1)(ii) is...

Hydrogen Production Costs of Various Primary Energy Sources

International Nuclear Information System (INIS)

Choi, Jae Hyuk; Tak, Nam Il; Kim, Yong Hee; Park, Won Seok

2005-11-01

Many studies on the economical aspects of hydrogen energy technologies have been conducted with the increase of the technical and socioeconomic importance of the hydrogen energy. However, there is still no research which evaluates the economy of hydrogen production from the primary energy sources in consideration of Korean situations. In this study, the hydrogen production costs of major primary energy sources are compared in consideration of the Korean situations such as feedstock price, electricity rate, and load factor. The evaluation methodology is based on the report of the National Academy of Science (NAS) of U.S. The present study focuses on the possible future technology scenario defined by NAS. The scenario assumes technological improvement that may be achieved if present research and development (R and D) programs are successful. The production costs by the coal and natural gas are 1.1 $/kgH 2 and 1.36 $/kgH 2 , respectively. However, the fossil fuels are susceptible to the price variation depending on the oil and the raw material prices, and the hydrogen production cost also depends on the carbon tax. The economic competitiveness of the renewable energy sources such as the wind, solar, and biomass are relatively low when compared with that of the other energy sources. The estimated hydrogen production costs from the renewable energy sources range from 2.35 $/kgH 2 to 6.03 $/kgH 2 . On the other hand, the production cost by nuclear energy is lower than that of natural gas or coal when the prices of the oil and soft coal are above $50/barrel and 138 $/ton, respectively. Taking into consideration the recent rapid increase of the oil and soft coal prices and the limited fossil resource, the nuclear-hydrogen option appears to be the most economical way in the future

Current U.S. uranium production costs

International Nuclear Information System (INIS)

Steyn, J.J.; Douglas, R.F.

1989-01-01

The U.S. uranium industry has undergone significant changes in the 1980s. These changes have come about largely as a result of the much slower growth of nuclear power than that initially anticipated and the deployment of an excess uranium supply capacity by 1979. The demand and supply imbalance has led to a substantial build-up in excess inventories which will not be remedied until well into the 1990s. At the same time as domestic inventories were building, large low cost uranium deposits were being discovered and developed in Canada and Australia. Additionally, in the past year or so it has become apparent that low cost uranium from the Soviet Union and the Peoples Republic of China will increasingly become a factor in the marketplace. The soft demand, large inventories, and competitive imports, stimulated by the recently ratified U.S.-Canada Free Trade Agreement, have caused the U.S. uranium industry to contract to one-tenth of its size ten years ago, if employment is taken at the gage. In light of the foregoing, this paper examines the current U.S. uranium production cost outlook for the 1990s. It is based on a direct cost analysis of all identifiable uranium deposits, mines, and production centers

Low-cost production of solar-cell panels

Science.gov (United States)

Bickler, D. B.; Gallagher, B. D.; Sanchez, L. E.

1980-01-01

Large-scale production model combines most modern manufacturing techniques to produce silicon-solar-cell panels of low costs by 1982. Model proposes facility capable of operating around the clock with annual production capacity of 20 W of solar cell panels.

PLACE OF PRODUCTION COSTS SYSTEM ANALYSIS IN SYSTEM ANALYSIS

Directory of Open Access Journals (Sweden)

Mariia CHEREDNYCHENKO

2016-12-01

Full Text Available Current economic conditions require the development and implementation of an adequate system of production costs, which would ensure a steady profit growth and production volumes in a highly competitive, constantly increasing input prices and tariffs. This management system must be based on an integrated production costs system analysis (PCSA, which would provide all operating costs management subsystems necessary information to design and make better management decisions. It provides a systematic analysis of more opportunities in knowledge, creating conditions of integrity mechanism knowledge object consisting of elements that show intersystem connections, each of which has its own defined and limited objectives, relationship with the environment.

Breast and prostate cancer productivity costs: a comparison of the human capital approach and the friction cost approach.

Science.gov (United States)

Hanly, Paul; Timmons, Aileen; Walsh, Paul M; Sharp, Linda

2012-05-01

Productivity costs constitute a substantial proportion of the total societal costs associated with cancer. We compared the results of applying two different analytical methods--the traditional human capital approach (HCA) and the emerging friction cost approach (FCA)--to estimate breast and prostate cancer productivity costs in Ireland in 2008. Data from a survey of breast and prostate cancer patients were combined with population-level survival estimates and a national wage data set to calculate costs of temporary disability (cancer-related work absence), permanent disability (workforce departure, reduced working hours), and premature mortality. For breast cancer, productivity costs per person using the HCA were € 193,425 and those per person using the FCA were € 8,103; for prostate cancer, the comparable estimates were € 109,154 and € 8,205, respectively. The HCA generated higher costs for younger patients (breast cancer) because of greater lifetime earning potential. In contrast, the FCA resulted in higher productivity costs for older male patients (prostate cancer) commensurate with higher earning capacity over a shorter time period. Reduced working hours postcancer was a key driver of total HCA productivity costs. HCA costs were sensitive to assumptions about discount and growth rates. FCA costs were sensitive to assumptions about the friction period. The magnitude of the estimates obtained in this study illustrates the importance of including productivity costs when considering the economic impact of illness. Vastly different results emerge from the application of the HCA and the FCA, and this finding emphasizes the importance of choosing the study perspective carefully and being explicit about assumptions that underpin the methods. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Modelagem matemática para seleção de conjuntos mecanizados agrícolas pelo menor custo operacional Mathematical modeling to select mechanized agricultural systems by the lowest operational cost

Directory of Open Access Journals (Sweden)

Fábio H. R. Baio

2013-04-01

Full Text Available A seleção de uma máquina agrícola pode tornar-se uma tarefa árdua, pois há diversas variáveis que devem ser consideradas. A escolha do equipamento mais adequado para uma propriedade agrícola é uma das etapas mais importantes do processo produtivo. O objetivo deste trabalho foi desenvolver um modelo de computador por programação linear em plataforma web para seleção automatizada de conjuntos mecanizados agrícolas, baseados no menor custo operacional. O programa, desenvolvido em linguagem ASP.NET, pode ser acessado gratuitamente pela Internet (http://www.maquinas.ufms.br. O usuário pode selecionar um conjunto mecanizado agrícola dentro de uma vasta lista de opções que contém suas especificações técnicas ou deixar que o programa lhe retorne automaticamente a melhor opção, pelo menor custo operacional. O programa desenvolvido proporciona ao usuário uma seleção racional via Internet de conjuntos mecanizados, permitindo o estudo econômico do uso das máquinas e implementos, sem a necessidade da instalação de programas dedicados no computador, que dificultariam a manutenção do banco de dados.The selection of an agricultural machine may become a challenging task, because there are several variables that must be considered. Choosing the more suitable equipment to a farm is one of the most important production process steps. The purpose of this study was to develop a computational model by linear programming based on web platform to select automatically mechanized agricultural systems founded on the lowest operational cost. The software was developed in ASP.NET language and can be accessed for free by the Internet (http://www.maquinas.ufms.br. The user can select a mechanized agricultural system in a list that contains the specifications or let the system returns automatically the best option at the lowest operational cost. The developed software brought to the user via Internet a rational selection of mechanized systems

The costs of production of alternative jet fuel: A harmonized stochastic assessment.

Science.gov (United States)

Bann, Seamus J; Malina, Robert; Staples, Mark D; Suresh, Pooja; Pearlson, Matthew; Tyner, Wallace E; Hileman, James I; Barrett, Steven

2017-03-01

This study quantifies and compares the costs of production for six alternative jet fuel pathways using consistent financial and technical assumptions. Uncertainty was propagated through the analysis using Monte Carlo simulations. The six processes assessed were HEFA, advanced fermentation, Fischer-Tropsch, aqueous phase processing, hydrothermal liquefaction, and fast pyrolysis. The results indicate that none of the six processes would be profitable in the absence of government incentives, with HEFA using yellow grease, HEFA using tallow, and FT revealing the lowest mean jet fuel prices at $0.91/liter ($0.66/liter-$1.24/liter), $1.06/liter ($0.79/liter-$1.42/liter), and $1.15/liter ($0.95/liter-$1.39/liter), respectively. This study also quantifies plant performance in the United States with a Renewable Fuel Standard policy analysis. Results indicate that some pathways could achieve positive NPV with relatively high likelihood under existing policy supports, with HEFA and FPH revealing the highest probability of positive NPV at 94.9% and 99.7%, respectively, in the best-case scenario. Copyright © 2016 Elsevier Ltd. All rights reserved.

Productivity costs and determinants of productivity in HIV-infected patients.

Science.gov (United States)

Sendi, Pedram; Schellenberg, Fabian; Ungsedhapand, Chaiwat; Kaufmann, Gilbert R; Bucher, Heiner C; Weber, Rainer; Battegay, Manuel

2004-05-01

In HIV-infected patients, reduced ability to work may be an important component of the societal costs of this disease. Few data about productivity costs in HIV-infected patients are available. The goals of this study were to estimate productivity costs in the HIV-infected population in Switzerland and to identify characteristics that may influence patient productivity. This cross-sectional study included all patients younger than retirement age (65 years for men and 62 years for women) who were enrolled in the Swiss HIV Cohort Study in 2002. Measures of productivity losses in this population were based on patients' ability to work and the median monthly wage rates adjusted for age, sex, and educational level in Switzerland. Factors associated with ability to work were analyzed in a multivariate ordinary logistic regression (proportional odds) model. As of July 1, 2002, the exchange rate for US dollars to Swiss francs (CHF) was US $1.00 approximately equal to CHF 1.48. A total of 5319 HIV-infected patients (3665 men [68.9%] and 1655 women [31.1%]; mean [SD] age, 40.6 [8.4] years; range, 17-64 years) were included in the study. The mean annual productivity loss per patient was estimated at CHF 22,910 (95% CI, CHF 22,064-CHF 23, 756). Ability to work was independently associated with the following (P increase: odds ratio [OR], 0.60 [95% CI, 0.54-0.62]), sex (female/male: OR, 0.73 [95% CI, 0.63-0.84]), history of IV drug use (OR, 0.22 [95% CI, 0.19-0.26]), time since first positive HIV test (>10 years vs or =501 vs 0-200 cells/microL: OR, 2.01 [95%, CI, 1.64-2.46]), history of AIDS-indicator disease (OR, 0.47 [95% CI, 0.41-0.55]), stable partnership during the last 6 months (OR, 1.63 [95% CI, 1.43-1.86]), and educational level (higher vs basic: OR, 1.68 [95% CI, 1.45-1.95]). Productivity losses to society for the HIV-infected population appeared to be substantial in this analysis. Given a patient's clinical health status, a higher education level and a stable

73 Activity Based Costing and Product Pricing Decision: the Nigerian Case

Directory of Open Access Journals (Sweden)

Ebipanipre Gabriel Mieseigha

2014-06-01

Full Text Available This paper examined activity based costing and product pricing decisions in Nigeria so as to ascertain whether activity based costing have the ability to enhance profitability and control cost of manufacturing firms. Towards this end, a multiple correlation and regression estimation technique was used in analyzing the data obtained in the study. The study found that activity based costing affects product costing and pricing decision. In addition, the results showed that improved profitability and cost control can be achieved by implementing activity based costing approach by manufacturing firms. The implication is that traditional costing approach fails in many pricing situations by arbitrarily allocating indirect cost and activity based costing helps in allocating indirect cost accurately. Thus, it was recommended amongst others that activity based costing need to be practiced, maintained and implemented by manufacturing firms since it has a broad range of uses for a wide variety of company functions and operations in the area of process analysis, strategy support, time-based accounting, monitoring wastage, as well as quality and productivity management.

Understanding the reductions in US corn ethanol production costs: An experience curve approach

International Nuclear Information System (INIS)

Hettinga, W.G.; Junginger, H.M.; Dekker, S.C.; Hoogwijk, M.; McAloon, A.J.; Hicks, K.B.

2009-01-01

The US is currently the world's largest ethanol producer. An increasing percentage is used as transportation fuel, but debates continue on its costs competitiveness and energy balance. In this study, technological development of ethanol production and resulting cost reductions are investigated by using the experience curve approach, scrutinizing costs of dry grind ethanol production over the timeframe 1980-2005. Cost reductions are differentiated between feedstock (corn) production and industrial (ethanol) processing. Corn production costs in the US have declined by 62% over 30 years, down to 100$ 2005 /tonne in 2005, while corn production volumes almost doubled since 1975. A progress ratio (PR) of 0.55 is calculated indicating a 45% cost decline over each doubling in cumulative production. Higher corn yields and increasing farm sizes are the most important drivers behind this cost decline. Industrial processing costs of ethanol have declined by 45% since 1983, to below 130$ 2005 /m 3 in 2005 (excluding costs for corn and capital), equivalent to a PR of 0.87. Total ethanol production costs (including capital and net corn costs) have declined approximately 60% from 800$ 2005 /m 3 in the early 1980s, to 300$ 2005 /m 3 in 2005. Higher ethanol yields, lower energy use and the replacement of beverage alcohol-based production technologies have mostly contributed to this substantial cost decline. In addition, the average size of dry grind ethanol plants increased by 235% since 1990. For the future it is estimated that solely due to technological learning, production costs of ethanol may decline 28-44%, though this excludes effects of the current rising corn and fossil fuel costs. It is also concluded that experience curves are a valuable tool to describe both past and potential future cost reductions in US corn-based ethanol production

Cost and greenhouse gas emission tradeoffs of alternative uses of lignin for second generation ethanol

Science.gov (United States)

Pourhashem, Ghasideh; Adler, Paul R.; McAloon, Andrew J.; Spatari, Sabrina

2013-06-01

Second generation ethanol bioconversion technologies are under demonstration-scale development for the production of lignocellulosic fuels to meet the US federal Renewable Fuel Standards (RFS2). Bioconversion technology utilizes the fermentable sugars generated from the cellulosic fraction of the feedstock, and most commonly assumes that the lignin fraction may be used as a source of thermal and electrical energy. We examine the life cycle greenhouse gas (GHG) emission and techno-economic cost tradeoffs for alternative uses of the lignin fraction of agricultural residues (corn stover, and wheat and barley straw) produced within a 2000 dry metric ton per day ethanol biorefinery in three locations in the United States. We compare three scenarios in which the lignin is (1) used as a land amendment to replace soil organic carbon (SOC); (2) separated, dried and sold as a coal substitute to produce electricity; and (3) used to produce electricity onsite at the biorefinery. Results from this analysis indicate that for life cycle GHG intensity, amending the lignin to land is lowest among the three ethanol production options (-25 to -2 g CO2e MJ-1), substituting coal with lignin is second lowest (4-32 g CO2e MJ-1), and onsite power generation is highest (36-41 g CO2e MJ-1). Moreover, the onsite power generation case may not meet RFS2 cellulosic fuel requirements given the uncertainty in electricity substitution. Options that use lignin for energy do so at the expense of SOC loss. The lignin-land amendment option has the lowest capital cost among the three options due to lower equipment costs for the biorefinery’s thermal energy needs and use of biogas generated onsite. The need to purchase electricity and uncertain market value of the lignin-land amendment could raise its cost compared to onsite power generation and electricity co-production. However, assuming a market value (50-100/dry Mg) for nutrient and soil carbon replacement in agricultural soils, and potentially

Technical and economic modelling of processes for liquid fuel production in Europe

International Nuclear Information System (INIS)

Bridgwater, A.V.; Double, J.M.

1991-01-01

The project which is described had the objective of examining the full range of technologies for liquid fuel production from renewable feedstocks in a technical and economic evaluation in order to identify the most promising technologies. The technologies considered are indirect thermochemical liquefaction (i.e. via gasification) to produce methanol, fuel alcohol or hydrocarbon fuels, direct thermochemical liquefaction or pyrolysis to produce hydrocarbon fuels and fermentation to produce ethanol. Feedstocks considered were wood, refuse derived fuel, straw, wheat and sugar beet. In order to carry out the evaluation, a computer model was developed, based on a unit process approach. Each unit operation is modelled as a process step, the model calculating the mass balance, energy balance and operating cost of the unit process. The results from the process step models are then combined to generate the mass balance, energy balance, capital cost and operating cost for the total process. The results show that the lowest production cost (L7/GJ) is obtained for methanol generated from a straw feedstock, but there is a moderate level of technical uncertainty associated with this result. The lowest production cost for hydrocarbon fuel (L8.6/GJ) is given by the pyrolysis process using a wood feedstock. This process has a high level of uncertainty. Fermentation processes showed the highest production costs, ranging from L14.4/GJ for a simple wood feedstock process to L25.2/GJ for a process based on sugar beet. The important conclusions are as follows: - In every case, the product cost is above current liquid fuel prices; - In most cases the feedstock cost dominates the production cost; -The most attractive products are thermochemically produced alcohol fuels

Technical and economic modelling of processes for liquid fuel production in Europe

Energy Technology Data Exchange (ETDEWEB)

Bridgwater, A V; Double, J M [Aston Univ. Birmingham (GB). Dept of Chemical Engineering

1992-12-31

The project which is described had the objective of examining the full range of technologies for liquid fuel production from renewable feedstocks in a technical and economic evaluation in order to identify the most promising technologies. The technologies considered are indirect thermochemical liquefaction (i.e. via gasification) to produce methanol, fuel alcohol or hydrocarbon fuels, direct thermochemical liquefaction or pyrolysis to produce hydrocarbon fuels and fermentation to produce ethanol. Feedstocks considered were wood, refuse derived fuel, straw, wheat and sugar beet. In order to carry out the evaluation, a computer model was developed, based on a unit process approach. Each unit operation is modelled as a process step, the model calculating the mass balance, energy balance and operating cost of the unit process. The results from the process step models are then combined to generate the mass balance, energy balance, capital cost and operating cost for the total process. The results show that the lowest production cost (L7/GJ) is obtained for methanol generated from a straw feedstock, but there is a moderate level of technical uncertainty associated with this result. The lowest production cost for hydrocarbon fuel (L8.6/GJ) is given by the pyrolysis process using a wood feedstock. This process has a high level of uncertainty. Fermentation processes showed the highest production costs, ranging from L14.4/GJ for a simple wood feedstock process to L25.2/GJ for a process based on sugar beet. The important conclusions are as follows: - In every case, the product cost is above current liquid fuel prices; - In most cases the feedstock cost dominates the production cost; -The most attractive products are thermochemically produced alcohol fuels.

A new approach for product cost estimation using data envelopment analysis

Directory of Open Access Journals (Sweden)

Adil Salam

2012-10-01

Full Text Available Cost estimation of new products has always been difficult as only few design, manufacturing and operational features will be known. In these situations, parametric or non-parametric methods are commonly used to estimate the cost of a product given the corresponding cost drivers. The parametric models use priori determined cost function where the parameters of the function are evaluated from historical data. Non-parametric methods, on the other hand, attempt to fit curves to the historic data without predetermined function. In both methods, it is assumed that the historic data used in the analysis is a true representation of the relation between the cost drivers and the corresponding costs. However, because of efficiency variations of the manufacturers and suppliers, changes in supplier selections, market fluctuations, and several other reasons, certain costs in the historic data may be too high whereas other costs may represent better deals for their corresponding cost drivers. Thus, it may be important to rank the historic data and identify benchmarks and estimate the target costs of the product based on these benchmarks. In this paper, a novel adaptation of cost drivers and cost data is introduced in order to use data envelopment analysis for the purpose of ranking cost data and identify benchmarks, and then estimate the target costs of a new product based on these benchmarks. An illustrative case study has been presented for the cost estimation of landing gears of an aircraft manufactured by an aerospace company located in Montreal, CANADA.

Cogeneration Power Plants: a Proposed Methodology for Unitary Production Cost

International Nuclear Information System (INIS)

Metalli, E.

2009-01-01

A new methodology to evaluate unitary energetic production costs in the cogeneration power plants is proposed. This methodology exploits the energy conversion factors fixed by Italian Regulatory Authority for Electricity and Gas. So it allows to settle such unitary costs univocally for a given plant, without assigning them a priori subjective values when there are two or more energy productions at the same time. Moreover the proposed methodology always ensures positive values for these costs, complying with the total generation cost balance equation. [it

Bioenergy production and use: Comparative analysis of the economic and environmental effects

International Nuclear Information System (INIS)

Hennig, Christiane; Gawor, Marek

2012-01-01

Highlights: ► Study of 12 bioenergy generation pathways as to environmental and economic aspects. ► LCA focused on the GWP, acidification, eutrophication, cumulative energy demand. ► Economic analysis determined electricity production costs based on annuity method. ► Wood-based plants have the best characteristics from environmental point of view. ► Wood-based plants have lowest electricity production costs, biogas plants make gain. - Abstract: This study analyses the use of liquid, solid and gaseous biomass for power generation in Germany with respect to the Renewable Energy Sources Act (EEG), a significant policy instrument for promoting electricity generation based on renewable energy sources. The aim is the identification of bioenergy conversion pathways that have a low environmental impact and are cost-effective. To achieve this objective several research steps were undertaken, including a life-cycle analysis (LCA), economic analysis and the determination of the CO 2 abatement costs. Besides, the authors show and discuss how a simplification of the environmental assessment by considering only the impact category greenhouse gases or the application of different calculation methodologies (i.e. allocation rules between electricity and heat produced) can affect the results. Overall the results show that the use of solid (wood) and gaseous biomass pathways causes both the lowest environmental impacts and electricity production costs when used for electricity generation. The choice of the modelling and calculation methodology may significantly influence the outcome (i.e. application of an exergetic allocation increases the environmental burden related to electricity generation). The lowest CO 2 -abatement costs were determined for the biodegradable waste pathway.

Enhancing efficiency of production cost on seafood process with activity based management method

Science.gov (United States)

Tarigan, U.; Tarigan, U. P. P.

2018-02-01

The efficiency of production costs has an important impact maintaining company presence in the business world, as well as in the face of increasingly sharp global competition. It was done by identifying and reducing non-value-added activities to decrease production costs and increase profits. The study was conducted at a company engaged in the production of squid (seafood). It has a higher product price than the market as Rp 50,000 per kg while the market price of squid is only Rp 35,000 per kg. The price of the product to be more expensive compared with market price, and thereby a lot more consumers choose the lower market price. Based on the discussions conducted, the implementation of Activity Based Management was seen in the reduction of activities that are not added value in the production process. Since each activities consumers cost, the reduction of nonvalue-added activities has effects on the decline of production cost. The production’s decline costs mainly occur in the reduction of material transfer costs. The results showed that there was an increase after the improvement of 2.60%. Increased production cost efficiency causes decreased production costs and increased profits.

Final Report: Hydrogen Production Pathways Cost Analysis (2013 – 2016)

Energy Technology Data Exchange (ETDEWEB)

James, Brian David [Strategic Analysis Inc., Arlington, VA (United States); DeSantis, Daniel Allan [Strategic Analysis Inc., Arlington, VA (United States); Saur, Genevieve [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-09-30

This report summarizes work conducted under a three year Department of Energy (DOE) funded project to Strategic Analysis, Inc. (SA) to analyze multiple hydrogen (H₂) production technologies and project their corresponding levelized production cost of H₂. The analysis was conducted using the H2A Hydrogen Analysis Tool developed by the DOE and National Renewable Energy Laboratory (NREL). The project was led by SA but conducted in close collaboration with the NREL and Argonne National Laboratory (ANL). In-depth techno-economic analysis (TEA) of five different H₂ production methods was conducted. These TEAs developed projections for capital costs, fuel/feedstock usage, energy usage, indirect capital costs, land usage, labor requirements, and other parameters, for each H₂ production pathway, and use the resulting cost and system parameters as inputs into the H2A discounted cash flow model to project the production cost of H₂ ($/kgH₂). Five technologies were analyzed as part of the project and are summarized in this report: Proton Exchange Membrane technology (PEM), High temperature solid oxide electrolysis cell technology (SOEC), Dark fermentation of biomass for H₂ production, H₂ production via Monolithic Piston-Type Reactors with rapid swing reforming and regeneration reactions, and Reformer-Electrolyzer-Purifier (REP) technology developed by Fuel Cell Energy, Inc. (FCE).

Cost Effective Technologies and Renewable Substrates for Biosurfactants’ Production

Directory of Open Access Journals (Sweden)

Ibrahim M Banat

2014-12-01

Full Text Available Diverse types of microbial surface-active amphiphilic molecules are produced by a range of microbial communities. The extraordinary properties of biosurfactant / bioemulsifier (BS/BE as surface active products allows them to have key roles in various field of applications such as bioremediation, biodegradation, enhanced oil recovery, pharmaceutics, food processing among many others. This leads to a vast number of potential applications of these BS/BE in different industrial sectors. Despite the huge number of reports and patents describing BS and BE applications and advantages, commercialization of these compounds remain difficult, costly and to a large extent irregular. This is mainly due to the usage of chemically synthesized media for growing producing microorganism and in turn the production of preferred quality products. It is important to note that although a number of developments have taken place in the field of biosurfactant industries, large scale production remains economically challenging for many types of these products. This is mainly due to the huge monetary difference between the investment and achievable productivity from the commercial point of view. This review discusses low cost, renewable raw substrates and fermentation technology in BS/BE production processes and their role in reducing the production cost.

Cost reduction in deep water production systems

International Nuclear Information System (INIS)

Beltrao, R.L.C.

1995-01-01

This paper describes a cost reduction program that Petrobras has conceived for its deep water field. Beginning with the Floating Production Unit, a new concept of FPSO was established where a simple system, designed to long term testing, can be upgraded, on the location, to be the definitive production unit. Regarding to the subsea system, the following projects will be considered. (1) Subsea Manifold: There are two 8-well-diverless manifolds designed for 1,000 meters presently under construction and after a value analysis, a new design was achieved for the next generation. Both projects will be discussed and a cost evaluation will also be provided. (2) Subsea Pipelines: Petrobras has just started a large program aiming to reduce cost on this important item. There are several projects such as hybrid (flexible and rigid) pipes for large diameter in deep water, alternatives laying methods, rigid riser on FPS, new material...etc. The authors intend to provide an overview of each project

Calculation of Complexity Costs – An Approach for Rationalizing a Product Program

DEFF Research Database (Denmark)

Hansen, Christian Lindschou; Mortensen, Niels Henrik; Hvam, Lars

2012-01-01

This paper proposes an operational method for rationalizing a product program based on the calculation of complexity costs. The method takes its starting point in the calculation of complexity costs on a product program level. This is done throughout the value chain ranging from component invento...... of a product program. These findings represent an improved decision basis for the planning of reactive and proactive initiatives of rationalizing a product program.......This paper proposes an operational method for rationalizing a product program based on the calculation of complexity costs. The method takes its starting point in the calculation of complexity costs on a product program level. This is done throughout the value chain ranging from component...... inventories at the factory sites, all the way to the distribution of finished goods from distribution centers to the customers. The method proposes a step-wise approach including the analysis, quantification and allocation of product program complexity costs by the means of identifying of a number...

Hydrogen Production Cost Estimate Using Biomass Gasification: Independent Review

Energy Technology Data Exchange (ETDEWEB)

Ruth, M.

2011-10-01

This independent review is the conclusion arrived at from data collection, document reviews, interviews and deliberation from December 2010 through April 2011 and the technical potential of Hydrogen Production Cost Estimate Using Biomass Gasification. The Panel reviewed the current H2A case (Version 2.12, Case 01D) for hydrogen production via biomass gasification and identified four principal components of hydrogen levelized cost: CapEx; feedstock costs; project financing structure; efficiency/hydrogen yield. The panel reexamined the assumptions around these components and arrived at new estimates and approaches that better reflect the current technology and business environments.

APPLICABILITY OF ACTIVITY BASED COSTING IN NEW PRODUCT DEVELOPMENT PROCESSES

Directory of Open Access Journals (Sweden)

Ewa Wanda MARUSZEWSKA

2015-01-01

Full Text Available The purpose of the article is to emphasis that activity based costing is a proper tool for engineers to enhance their deci-sion-making process while developing new product. The theoretical analysis shows that variety of factors shall be en-compassed into new product decision-making process and therefore engineers and management should pay great attention to proper cost allocation. The paper suggests the usage of Activity Based Costing methodology for new product development decision-making process. Author states that application ABC in the process of rational decision-making referring to new product development enables managers and engineers to prioritize possible solutions, and reallocate resources used in production process in order to meet wider organizational goals. It would also contribute in coopera-tion of managers and engineers for the sake of organizational goal.

EVALUATION OF CORROSION COST OF CRUDE OIL PROCESSING INDUSTRY

Directory of Open Access Journals (Sweden)

ADESANYA A.O.

2012-08-01

Full Text Available Crude oil production industry as the hub of Nigeria Economy is not immune to the global financial meltdown being experienced world over which have resulted in a continual fall of oil price. This has necessitated the need to reduce cost of production. One of the major costs of production is corrosion cost, hence, its evaluation. This research work outlined the basic principles of corrosion prevention, monitoring and inspection and attempted to describe ways in which these measures may be adopted in the context of oil production. A wide range of facilities are used in crude oil production making it difficult to evaluate precisely the extent of corrosion and its cost implication. In this study, cost of corrosion per barrel was determined and the annualized value of corrosion cost was also determined using the principles of engineering economy and results analyzed using descriptive statistics. The results showed that among the corrosion prevention methods identified, the use of chemical treatment gave the highest cost contribution (81% of the total cost of prevention while coating added 19%. Cleaning pigging and cathodic protection gave no cost. The contribution of corrosion maintenance methods are 60% for repairs and 40% for replacement. Also among the corrosion monitoring and inspection identified, NDT gave the highest cost contribution of 41% of the total cost, followed by coating survey (34%. Cathodic protection survey and crude analysis gives the lowest cost contribution of 19% and 6% respectively. Corrosion control cost per barrel was found to be 77 cent/barrel. The significance of this cost was not much due to high price of crude oil in the international market. But the effect of corrosion in crude oil processing takes its toll on crude oil production (i.e. deferment.

Impact cost of the product on the effectiveness of business organizations

Directory of Open Access Journals (Sweden)

A. S. Senin

2015-01-01

Full Text Available One of the key elements of managing the operations of the organization - management costs, as the costs, representing the payment that needs to be done to attract and retain economic resources, are one of the main factors determining the size of the financial results of the organization, return on invested capital, and, ultimately, the value of the business.Objectives. The aim of this work is to study the influence of the structure of production costs on the profitability of products.Method’s. To complete this article were used such methods of analysis as legal, comparative, economic-statistical and correlation.Conclusions / significance. The practical value of this work lies in the fact that in the article the notion and cogs, equations of linear regression between the proportion of costs in the cost and profitability of products by types of economic activity in the Russian Federation in 2012, the Obtained models allow knowing the share of costs in the cost structure for different types of economic activities in the Russian Federation in 2012 to estimate the average level of profitability of production.

Operator product expansion of the lowest weight CPOs in N=4 SYM4 at strong coupling

International Nuclear Information System (INIS)

Arutyunov, Gleb; Frolov, Sergey; Petkou, Anastasios C.

2000-01-01

We present a detailed analysis of the 4-point functions of the lowest weight chiral primary operators O I ∼tr(phi (i phi j) ) in N=4 SYM 4 at strong coupling and show that their structure is compatible with the predictions of AdS/CFT correspondence. In particular, all power-singular terms in the 4-point functions exactly coincide with the contributions coming from the conformal blocks of the CPOs, the R -symmetry current and the stress tensor. Operators dual to string modes decouple at strong coupling. We compute the anomalous dimensions and the leading 1/N 2 corrections to the normalization constants of the 2- and 3-point functions of scalar and vector double-trace operators with approximate dimensions 4 and 5, respectively. We also find that the conformal dimensions of certain towers of double-trace operators in the 105 , 84 and 175 irreps are non-renormalized. We show that, despite the absence of a non-renormalization theorem for the double-trace operator in the 20 irrep, its anomalous dimension vanishes. As by-products of our investigation, we derive explicit expressions for the conformal block of the stress tensor, and for the conformal partial wave amplitudes of a conserved current and of a stress tensor in d dimensions

Productivity and Cost Comparison of Two Different-Sized Skidders

Science.gov (United States)

John Klepac; Robert B. Rummer

2000-01-01

Productivity and cost of two skidders, Timberjack models 460 and 660, were evaluated while operatin in a loblolly pine plantation performin a clearcut harvest in the Southeastern US. Productivity without delimbing was 46.7 tonnes per PMH for the model 460 and 51.7 tonnes per PMH for the model 660. Cost per tonne was $1.70 for the model 460 and $1.90 for the model 660....

The costs of the different pathways of electricity production and saving

International Nuclear Information System (INIS)

Dessus, B.

2012-01-01

The author discusses the content and methodology of a report published by the French Court of Audit on the assessment of the costs of the nuclear sector. He briefly recalls the principle adopted by the Court, i.e. the method of the economic current cost which calculates a global MWh cost on the whole operation duration of the selected production tool. The author discusses the application of this method to different electricity production and consumption sectors: ground-based wind energy, the Flamanville EPR, use of low-energy bulbs, air-air heat pumps, a refrigerator. He compares and discusses the results obtained for different electricity production sectors (EPR, ground-based wind energy, and gas combined cycle technology) and their sensitivity to adopted hypotheses. He comments the evolution of the investment cost of nuclear reactors in France, the economic current costs of offshore wind energy and small photovoltaic production. He finally discusses the economic current costs of the different ways of energy saving and their sensitivity to the adopted hypotheses

Mixing of the lowest-lying qqq configurations with JP =1/2- in different hyperfine interaction models

Science.gov (United States)

Chen, Jia; An, Chunsheng; Chen, Hong

2018-02-01

We investigate mixing of the lowest-lying qqq configurations with JP = 1/2- caused by the hyperfine interactions between quarks mediated by Goldstone Boson Exchange, One Gluon Exchange, and both Goldstone Boson and One Gluon exchange, respectively. The first orbitally excited nucleon, Σ, Λ and Ξ states are considered. Contributions of both the contact term and tensor term are taken into account. Our numerical results show that mixing of the studied configurations in the two employed hyperfine interaction models are very different. Therefore, the present results, which should affect the strong and electromagnetic decays of baryon resonances, may be used to examine the present employed hyperfine interaction models. Supported by National Natural Science Foundation of China (11675131,11645002), Chongqing Natural Science Foundation (cstc2015jcyjA00032) and Fundamental Research Funds for the Central Universities (SWU115020)

Strategies for cost-effective and enhanced production of bacterial cellulose.

Science.gov (United States)

Islam, Mazhar Ul; Ullah, Muhammad Wajid; Khan, Shaukat; Shah, Nasrullah; Park, Joong Kon

2017-09-01

Bacterial cellulose (BC) has received substantial attention because of its high purity, mechanical strength, crystallinity, liquid-absorbing capabilities, biocompatibility, and biodegradability etc. These properties allow BC to be used in various fields, especially in industries producing medical, electronic, and food products etc. A major discrepancy associated with BC is its high production cost, usually much higher than the plant cellulose. To address this limitations, researchers have developed several strategies for enhanced production of BC including the designing of advanced reactors and utilization of various carbon sources. Another promising approach is the production of BC from waste materials such as food, industrial, agricultural, and brewery wastes etc. which not only reduces the overall BC production cost but is also environment-friendly. Besides, exploration of novel and efficient BC producing microbial strains provides impressive boost to the BC production processes. To this end, development of genetically engineered microbial strains has proven useful for enhanced BC production. In this review, we have summarized major efforts to enhance BC production in order to make it a cost-effective biopolymer. This review can be of interest to researchers investigating strategies for enhanced BC production, as well as companies exploring pilot projects to scale up BC production for industrial applications. Copyright © 2017 Elsevier B.V. All rights reserved.

Resource-recovery facilities: Production and cost functions, and debt-financing issues

International Nuclear Information System (INIS)

Simonsen, W.S.

1991-01-01

Some of the fiscal questions relating to resource-recovery, or trash-burning, facilities are addressed. Production and cost functions for resource-recovery facilities are estimated using regression analysis. Whether or not there are returns to scale are addressed using the production and cost-function framework. Production functions are also estimated using data envelopment analysis (DEA), and results are compared to the regression results. DEA is a linear-program-based technique that can provide information about the production process. The data used to estimate the production and cost functions were collected from the Resource Recovery Yearbook. Once the decision is made to construct a resource-recovery facility, it needs to be financed. The high cost of these facilities usually prohibits financing construction out of regular operating revenues. Therefore, the issues a government faces when debt is used to finance a resource-recovery facility are analyzed. The most important public policy finding is that increasing economies of scale do not seem to be present for resource-recovery facilities

Data on the cost-benefit analysis of mammography

International Nuclear Information System (INIS)

Zarand, P.; Pentek, Z.

1982-01-01

The radiation exposure and the cost per examination are compared in the case of three methods: non-screen film mammography, 10-dose mammography and xeromammography. 10-dose mammography results in the lowest radiation exposure whereas xeromammography has the lowest cost. (L.E.)

Renewable electricity production costs-A framework to assist policy-makers' decisions on price support

International Nuclear Information System (INIS)

Dinica, Valentina

2011-01-01

Despite recent progress, the production costs for renewable electricity remain above those for conventional power. Expectations of continuous reductions in production costs, typically underpin governments' policies for financial support. They often draw on the technology-focused versions of the Experience Curve model. This paper discusses how national-contextual factors also have a strong influence on production costs, such as geographic, infrastructural, institutional, and resource factors. As technologies mature, and as they reach significant levels of diffusion nationally, sustained increases in production costs might be recorded, due to these nationally contextual factors, poorly accounted for in policy-making decisions for price support. The paper suggests an analytical framework for a more comprehensive understanding of production costs. Based on this, it recommends that the evolution of specific cost levels and factors be monitored to locate 'sources of changes'. The paper also suggests policy instruments that governments may use to facilitate cost decreases, whenever possible. The application of the framework is illustrated for the diffusion of wind power in Spain during the past three decades. - Highlights: → Models, frameworks for policy-making on price support for renewable electricity production costs. → Policy instruments to help reduce production costs. → Limits to the influence of policies of production costs reductions.

The contemporary art of cost management methods during product development

NARCIS (Netherlands)

Wouters, M.; Morales, S.; Epstein, M.J.; Lee, J.Y.

2014-01-01

Purpose To provide an overview of research published in the management accounting literature on methods for cost management in new product development, such as a target costing, life cycle costing, component commonality, and modular design. Methodology/approach The structured literature search

Productivity Costs Associated With Breast Cancer Among Survivors Aged 18-44 Years.

Science.gov (United States)

Ekwueme, Donatus U; Trogdon, Justin G; Khavjou, Olga A; Guy, Gery P

2016-02-01

No study has quantified productivity losses associated with breast cancer in younger women aged 18-44 years. This study estimated productivity costs, including work and home productivity losses, among younger women who reported ever receiving a breast cancer diagnosis. A two-part regression model and 2000-2010 National Health Interview Survey data were used to estimate the number of work and home productivity days missed because of breast cancer, adjusted for socioeconomic characteristics and comorbidities. Estimates for younger women were compared with those for women aged 45-64 years. Data were analyzed in 2013-2014. Per capita, younger women with breast cancer had annual losses of $2,293 (95% CI=$1,069, $3,518) from missed work and $442 (95% CI=$161, $723) from missed home productivity. Total annual breast cancer-associated productivity costs for younger women were $344 million (95% CI=$154 million, $535 million). Older women with breast cancer had lower per capita work loss productivity costs of $1,407 (95% CI=$899, $1,915) but higher total work loss productivity costs estimated at $1,072 million (95% CI=$685 million, $1,460 million) than younger women. Younger women with a history of breast cancer face a disproportionate share of work and home productivity losses. Although older women have lower per capita costs, total productivity costs were higher for older women because the number of older women with breast cancer is higher. The results underscore the importance of continued efforts by the public health community to promote and support the unique needs of younger breast cancer survivors. Published by Elsevier Inc.

Cost of product functions using analysis of value

Directory of Open Access Journals (Sweden)

Luminita Parv

2016-09-01

Full Text Available The value of use is a specific notion but of a great generality that makes the product be regarded as a complex system that transforms itself in time, thus undergoing evolution. Therefore, the product is important not in itself, but for the sake of the requirements it satisfies and for the functions it provides. In the analysis of value there are connections of a technical nature that implicitly lead to connections of an economic nature. Thus, the method of the ”analysis of value” will actually examine the cost of product functions, the aim of the method being the balance of functions costs on the basis of their importance for the product. Identifying the functions represents one of the important stages of the analysis of value. The difficulty in fixing the functions derives from the fact that there are not any rules clear enough for this activity, but only principles

Increased accuracy of cost-estimation using product configuration systems

DEFF Research Database (Denmark)

Rasmussen, Jeppe Bredahl; Hvam, Lars; Mortensen, Niels Henrik

This article describes an approach for utilizing Product Configuration Systems (PCS) for quantifying project costs in project-based companies. It presents a case study demonstrating a method of quantifying costs in a way that makes it possible to configure cost- and time estimates. Piecework costs......, material costs and sub-supplier costs are used as principle cost elements and linked to structural and process elements to facilitate configuration. The cost data are used by the PCS to generate fast and accurate cost-estimates, quotations, time estimates and cost summaries. The described cost...... quantification principles have been used in a Scandinavian SME (Small and Medium-sized Enterprise) since the 90’s, but have since 2011 been adopted to be used in a configuration system. A longitudinal case study was conducted to compare cost and time-estimation accuracy before and after implementation. We...

VARIANTS OF DETERMINING THE MANUFACTURING COST OF A PRODUCT IN A PRODUCTION UNIT IN THE LIGHT OF BALANCE SHEET LAW

Directory of Open Access Journals (Sweden)

Marzena STROJEK‐FILUS

2014-01-01

Full Text Available The category of the manufacturing cost of a product is one of the most important ones from the point of view of proper valuation of the assets of a production unit, costs of its operations as well as pricing decisions. This article presents the problem of determining the manufacturing cost of a product in terms of balance sheet law. It has been shown that in order to determine this value various methods and options are allowed by this law, by means of which different values of manufacturing cost of a product are obtained. The importance of a proper selection of an allocation key in setilement of indirect production costs has been highlighted as well as the results of using, in certain cases, approved simplifications in the balance sheet law when determining the manufacturing cost of products have been demonstrated. The problem presented in this article is crucial from the point of view of an organization and management of production as well as managerial decision‐making in a company in the area of design of products and processes.

Cost and greenhouse gas emission tradeoffs of alternative uses of lignin for second generation ethanol

International Nuclear Information System (INIS)

Pourhashem, Ghasideh; Spatari, Sabrina; Adler, Paul R; McAloon, Andrew J

2013-01-01

Second generation ethanol bioconversion technologies are under demonstration-scale development for the production of lignocellulosic fuels to meet the US federal Renewable Fuel Standards (RFS2). Bioconversion technology utilizes the fermentable sugars generated from the cellulosic fraction of the feedstock, and most commonly assumes that the lignin fraction may be used as a source of thermal and electrical energy. We examine the life cycle greenhouse gas (GHG) emission and techno-economic cost tradeoffs for alternative uses of the lignin fraction of agricultural residues (corn stover, and wheat and barley straw) produced within a 2000 dry metric ton per day ethanol biorefinery in three locations in the United States. We compare three scenarios in which the lignin is (1) used as a land amendment to replace soil organic carbon (SOC); (2) separated, dried and sold as a coal substitute to produce electricity; and (3) used to produce electricity onsite at the biorefinery. Results from this analysis indicate that for life cycle GHG intensity, amending the lignin to land is lowest among the three ethanol production options (−25 to −2 g CO 2 e MJ −1 ), substituting coal with lignin is second lowest (4–32 g CO 2 e MJ −1 ), and onsite power generation is highest (36–41 g CO 2 e MJ −1 ). Moreover, the onsite power generation case may not meet RFS2 cellulosic fuel requirements given the uncertainty in electricity substitution. Options that use lignin for energy do so at the expense of SOC loss. The lignin–land amendment option has the lowest capital cost among the three options due to lower equipment costs for the biorefinery’s thermal energy needs and use of biogas generated onsite. The need to purchase electricity and uncertain market value of the lignin–land amendment could raise its cost compared to onsite power generation and electricity co-production. However, assuming a market value ($50–$100/dry Mg) for nutrient and soil carbon replacement in

Cost and price estimate of Brayton and Stirling engines in selected production volumes

Science.gov (United States)

Fortgang, H. R.; Mayers, H. F.

1980-01-01

The methods used to determine the production costs and required selling price of Brayton and Stirling engines modified for use in solar power conversion units are presented. Each engine part, component and assembly was examined and evaluated to determine the costs of its material and the method of manufacture based on specific annual production volumes. Cost estimates are presented for both the Stirling and Brayton engines in annual production volumes of 1,000, 25,000, 100,000 and 400,000. At annual production volumes above 50,000 units, the costs of both engines are similar, although the Stirling engine costs are somewhat lower. It is concluded that modifications to both the Brayton and Stirling engine designs could reduce the estimated costs.

Cost of paricá wood production in Paragominas region, Para State, Brazil

Directory of Open Access Journals (Sweden)

Rafaela da Silveira

2017-12-01

Full Text Available The silvicultural and economic potential of paricá (Schizolobium amazonicum has encouraged the expansion of this crop, mainly in the northern region of the country, provoking the need for studies on the species. The objective of this study was to estimate paricá production in Paragominas region, Para State, Brazil, at 5, 6 and 7 years, in three classes of productivity considering five plant arrangements, being identified the main costs of production, in addition to those most affected by plant arrangements. The volumetric estimation was obtained by modeling in population level and the analysis of the costs, through the methodology of the operational cost. It was possible to infer that the arrangement of plants 3 m x 2 m was superior in volume, compared to the other analyzed plant arrangements. The effective operating cost represented on average 65% of the total production costs. Transport was the most significant individual cost, in all analyzed plant arrangements. The maintenance, among the set of activities, was the most significant in planting, fact that may be related to the number and the long period for the activities execution. Smaller plant arrangements presented the higher total costs of production, depending or not on the remuneration for the use of the permanent and current capital.

Electric plant cost and power production expenses 1991

International Nuclear Information System (INIS)

1993-01-01

Electric Plant Cost and Power Production Expenses is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels (CNEAF); Energy Information Administration (EIA); US Department of Energy. This publication presents electric utility statistics on power production expenses and construction costs of electric generating plants. Data presented here are intended to provide information to the electric utility industry, educational institutions, Federal, State, and local governments, and the general public. These data are collected and published to fulfill data collection and dissemination responsibilities of the Energy Information Administration (EIA), as specified in the Federal Energy Administration Act (Public Law 93-275), as amended

Electric plant cost and power production expenses 1990

International Nuclear Information System (INIS)

1992-06-01

Electric Plant Cost and Power Production Expenses is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA); US Department of Energy. This publication presents electric utility statistics on power production expenses and construction costs of electric generating plants. Data presented here are intended to provide information to the electric utility industry, educational institutions, Federal, State, and local governments, and the general public. These data are collected and published to fulfill data collection and dissemination responsibilities of the Energy Information Administration (EIA), as specified in the Federal Energy Administration Act (Public Law 93-275), as amended

Photovoltaic energy cost limit

International Nuclear Information System (INIS)

Coiante, D.

1992-01-01

Referring to a photovoltaic system for grid connected applications, a parametric expression of kWh cost is derived. The limit of kWh cost is carried out extrapolating the values of cost components to their lowest figure. The reliability of the forecast is checked by disaggregating kWh cost in direct and indirect costs and by discussing the possible cost reduction of each component

The Relationship Between Job Satisfaction and Productivity-Related Costs: A Longitudinal Analysis.

Science.gov (United States)

Arnold, Amélie E; Coffeng, Jennifer K; Boot, Cécile R L; van der Beek, Allard J; van Tulder, Maurits W; Nieboer, Dagmar; van Dongen, Johanna M

2016-09-01

The aim of this study was to examine the longitudinal relationship between job satisfaction and total productivity-related costs, and between job satisfaction and absenteeism and presenteeism costs separately. A secondary aim was to explore whether these relationships differed across job types. Linear generalized estimating equation analyses were used to explore the longitudinal relationships. To explore whether the relationships differed across job types, stratified analyses were performed. A significant relationship was found between job satisfaction and total productivity-related costs [β = &OV0556;-273; 95% confidence interval (95% CI): -407 to -200] and between job satisfaction and presenteeism costs (β = &OV0556;-276; 95% CI: -367 to -235), but not between job satisfaction and absenteeism costs. These relationships differed across job types. Higher levels of job satisfaction were longitudinally related to lower total productivity-related costs and presenteeism costs, but not to lower absenteeism costs. These relationships seem to differ across job types.

The true cost of electric power. Summary for policymakers

Energy Technology Data Exchange (ETDEWEB)

Burtraw, Dallas; Knupnick, Alan [Resources for the Future, Washington, DC (United States). Center for Energy Economics and Policy

2012-06-15

This report examines the various methods that have been used to measure 'true' costs of electricity generation technologies and looks at how such estimates can be used in company decision-making and public policy to ensure that investments are directed at the electricity generation methods with the lowest true costs to investors and society. In some geographic areas, adequate data and methods exist to make a solid estimate of the total social costs of energy production. In those places where the data or methods (or both) are less robust, it is possible to use a benefits transfer approach that still gives stakeholders important guidance about the scale of the true costs of their investments and to get started in formulating policies to incorporate those costs into the market price.

Reference costs of the electric power production

International Nuclear Information System (INIS)

2003-06-01

This study periodically realized by the DGEMP aims to compare the competitiveness of the different channels of electric power production, for different utilization conditions. The first part ''reference costs of the 2003 electric power production'' examines the prices of the electric power produced by different channels in particular in the framework of the industrial implementing in 2015. The nuclear and thermal power plants are concerned. The second part is devoted to the decentralized production channels (wind energy, photovoltaic, cogeneration heat-electricity) is under construction and will be presented next year. (A.L.B.)

Status and opportunities associated with product costing strategies in wood component manufacturing

Science.gov (United States)

Adrienn Andersch; Urs Buehlmann; Jan Wiedenbeck; Steve Lawser

2013-01-01

Product costing systems are critically important for businesses because they help reduce costs, price products at competitive prices, and enable strategic decisionmaking. This article reports the results of a survey designed to collect information about practices used by the North American hardwood dimension and components industry to calculate the cost of their...

Multi-objective optimization approach for cost management during product design at the conceptual phase

Science.gov (United States)

Durga Prasad, K. G.; Venkata Subbaiah, K.; Narayana Rao, K.

2014-03-01

The effective cost management during the conceptual design phase of a product is essential to develop a product with minimum cost and desired quality. The integration of the methodologies of quality function deployment (QFD), value engineering (VE) and target costing (TC) could be applied to the continuous improvement of any product during product development. To optimize customer satisfaction and total cost of a product, a mathematical model is established in this paper. This model integrates QFD, VE and TC under multi-objective optimization frame work. A case study on domestic refrigerator is presented to show the performance of the proposed model. Goal programming is adopted to attain the goals of maximum customer satisfaction and minimum cost of the product.

Costs in the function of business decision making for mushroom production

Directory of Open Access Journals (Sweden)

Ljubica Ranogajec

2018-03-01

Full Text Available Mushroom growing, as a branch of agriculture has been rapidly developing in recent years. Emphasis is particularly put on the application of technology that can accelerate the production process to increase yield and to minimize human labor invested in production. Mushroom production was analyzed on a farm with a monthly production of 15,000 kg or an annual production of 180,000 kg. The calculations were based on the defined difference between the costs of manual labor and machine service invested in the mushroom growing room. The break-even point or the coverage point was set at 83,414 kg, referring to the production level with the same manual and machine work costs. Machine refilling for mushroom production above the mentioned amount is more profitable, while manual refilling is economically efficient within the production below the determined amount. On the analyzed farm, applied machine work led to the lowering of costs for 167,778.00 HRK per year. Purchase of machinery requires a total investment of 1,207,500 HRK with the return of 7.2 years.

Effects of Variable Production Rate and Time-Dependent Holding Cost for Complementary Products in Supply Chain Model

Directory of Open Access Journals (Sweden)

Mitali Sarkar

2017-01-01

Full Text Available Recently, a major trend is going to redesign a production system by controlling or making variable the production rate within some fixed interval to maintain the optimal level. This strategy is more effective when the holding cost is time-dependent as it is interrelated with holding duration of products and rate of production. An effort is made to make a supply chain model (SCM to show the joint effect of variable production rate and time-varying holding cost for specific type of complementary products, where those products are made by two different manufacturers and a common retailer makes them bundle and sells bundles to end customers. Demand of each product is specified by stochastic reservation prices with a known potential market size. Those players of the SCM are considered with unequal power. Stackelberg game approach is employed to obtain global optimum solution of the model. An illustrative numerical example, graphical representation, and managerial insights are given to illustrate the model. Results prove that variable production rate and time-dependent holding cost save more than existing literature.

Wood chip production technology and costs for fuel in Namibia

Energy Technology Data Exchange (ETDEWEB)

Leinonen, A.

2007-12-15

This work has been done in the project where the main target is to evaluate the technology and economy to use bush biomass for power production in Namibia. The project has been financed by the Ministry for Foreign Affairs of Finland and the Ministry of Agriculture, Water and Forestry of the Republic of Namibia. The target of this study is to calculate the production costs of bush chips at the power plant using the current production technology and to look possibilities to develop production technology in order to mechanize production technology and to decrease the production costs. The wood production costs are used in feasibility studies, in which the technology and economy of utilization of wood chips for power generation in 5, 10 and 20 MW electric power plants and for power generation in Van Eck coal fired power plant in Windhoek are evaluated. Field tests were made at Cheetah Conservation Farm (CCF) in Otjiwarongo region. CCF is producing wood chips for briquette factory in Otjiwarongo. In the field tests it has been gathered information about this CCF semi-mechanized wood chip production technology. Also new machines for bush biomass chip production have been tested. A new mechanized production chain has been designed on the basis of this information. The production costs for the CCF semi-mechanized and the new production chain have been calculated. The target in the moisture content to produce wood chips for energy is 20 w-%. In the semi-mechanized wood chip production chain the work is done partly manually, and the supply chain is organized into crews of 4.8 men. The production chain consists of manual felling and compiling, drying, chipping with mobile chipper and manual feeding and road transport by a tractor with two trailers. The CCF production chain works well. The chipping and road transport productivity in the semimechanized production chain is low. New production machines, such as chainsaw, brush cutter, lawn mover type cutter, rotator saw in skid

Cost management and cross-functional communication through product architectures

NARCIS (Netherlands)

Zwerink, Ruud; Wouters, Marc; Hissel, Paul; Kerssens-van Drongelen, I.C.

2007-01-01

Product architecture decisions regarding, for example, product modularity, component commonality, and design re-use, are important for balancing costs, responsiveness, quality, and other important business objectives. Firms are challenged with complex tradeoffs between competing design priorities,

Evaluation of process costs for small-scale nitrogen removal from natural gas. Topical report, January 1989-December 1989

International Nuclear Information System (INIS)

Echterhoff, L.W.; Pathak, V.K.

1991-08-01

The report establishes the cost of producing pipeline quality gas on a small scale from high nitrogen subquality natural gas. Three processing technologies are evaluated: cryogenic, Nitrotec Engineering Inc.'s pressure swing adsorption (PSA), and lean oil absorption. Comparison of the established costs shows that the cryogenic process exhibits the lowest total plant investment for nitrogen feed contents up to about 22%, above which the PSA process exhibits the lowest investment cost. The lean oil process exhibits the highest total plant investment at the 25% nitrogen feed studied. Opposite to the total plant investment for the cryogenic process, the total plant investment for the PSA process decreases with increasing nitrogen content primarily due to increasing product gas compression requirements. The cryogenic process exhibits the lowest gas processing costs for the nitrogen content range under study. However, the difference between the gas processing costs for the PSA and cryogenic processes narrows as the nitrogen content approaches 15-25%. The lean oil gas processing cost is very high compared to both the cryogenic and PSA processes. The report verifies that nitrogen removal from natural gas is expensive, especially for small-scale applications, and several avenues are identified for improving the cryogenic and PSA technologies

Cost-efficiency of animal welfare in broiler production systems

NARCIS (Netherlands)

Gocsik, Éva; Brooshooft, Suzanne D.; Jong, de Ingrid C.; Saatkamp, Helmut W.

2016-01-01

Broiler producers operate in a highly competitive and cost-price driven environment. In addition, in recent years the societal pressure to improve animal welfare (AW) in broiler production systems is increasing. Hence, from an economic and decision making point of view, the cost-efficiency of

Giant angular resonance and the structure of the lowest-lying nuclear states

International Nuclear Information System (INIS)

Mikhajlov, I.N.; Usmanov, P.N.; Yuldashbaeva, Eh.Kh.

1987-01-01

The analysis is given of the Hamiltonian of the two-rotor model, which is based on the assumption that the giant angular resonance exists, i.e. that it is possible to rotate the neutron component of a deformed nucleus as a whole with respect to the proton component. The realization of the projections on the intrinsic axes of the angular momentum operators is found, the Hamiltonian matrix is determined in the basis convenient for the case of strong neutron-proton coupling. The spectrum of the two-rotor model is determined taking into account the nondiagonal matrix elements in the lowest order of the perturbation theory. The g factors and the probabilities of the M1 transitions are discussed

Lowest order Virtual Element approximation of magnetostatic problems

Science.gov (United States)

Beirão da Veiga, L.; Brezzi, F.; Dassi, F.; Marini, L. D.; Russo, A.

2018-04-01

We give here a simplified presentation of the lowest order Serendipity Virtual Element method, and show its use for the numerical solution of linear magneto-static problems in three dimensions. The method can be applied to very general decompositions of the computational domain (as is natural for Virtual Element Methods) and uses as unknowns the (constant) tangential component of the magnetic field $\\mathbf{H}$ on each edge, and the vertex values of the Lagrange multiplier $p$ (used to enforce the solenoidality of the magnetic induction $\\mathbf{B}=\\mu\\mathbf{H}$). In this respect the method can be seen as the natural generalization of the lowest order Edge Finite Element Method (the so-called "first kind N\\'ed\\'elec" elements) to polyhedra of almost arbitrary shape, and as we show on some numerical examples it exhibits very good accuracy (for being a lowest order element) and excellent robustness with respect to distortions.

Internal cost control on the ecological quality of products

Directory of Open Access Journals (Sweden)

N.P. Syroid

2018-04-01

Full Text Available To improve the environmental quality of products due attention should be paid to control the processes related to environmental quality input of the product. The results of the study help to state the purpose and objectives of the control, also to define objects for internal control of operations cost of environmental quality. So, we believe that the main purpose of internal cost control on the ecological quality of products is the establishment of the correctness and legality of business operations, prevention of violations and abuses in the expenditure of natural, labour, material and financial resources to ensure the minimization of negative impact on the health of consumers and the environment. The basic objectives of internal control of expenditure are brought forward, but it should be noted that they can vary and depend on the size, structure, spheres and types of economic activity of the enterprise, the requirements of management personnel. In the process of identifying the objects of control of environmental quality it should be noted that this list is not exhaustive, but it is most relevant to highlight objects such as genetically modified organisms and waste production. Also the subjects of cost control to environmental quality, their functions and the information base for monitoring are determined. Proper organization of the process of internal cost control on the ecological quality of products would benefit from a clear documentation of transactions, timely and complete registration of accounting data in the registers, the true reflection of information in managerial financial reporting and ensure reduction of the negative impact on the health of consumers and the environment.

Effects of housing system on the costs of commercial egg production.

Science.gov (United States)

Matthews, W A; Sumner, D A

2015-03-01

This article reports the first publicly available egg production costs compared across 3 hen-housing systems. We collected detailed data from 2 flock cycles from a commercial egg farm operating a conventional barn, an aviary, and an enriched colony system at the same location. The farm employed the same operational and accounting procedures for each housing system. Results provide clear evidence that egg production costs are much higher for the aviary system than the other 2 housing systems. Feed costs per dozen eggs are somewhat higher for the aviary and lower for the enriched house compared with the conventional house. Labor costs are much lower for the conventional house than the other 2, and pullet costs are much higher for the aviary. Energy and miscellaneous costs are a minimal part of total operating costs and do not differ by housing system. Total capital investments per hen-capacity are much higher for the aviary and the enriched house. Capital costs per dozen eggs depend on assumptions about appropriate interest and depreciation rates. Using the same 10% rate for each housing system shows capital costs per dozen for the aviary and the enriched housing system are much higher than capital costs per dozen for the conventional house. The aviary has average operating costs (feed, labor, pullet, energy, and miscellaneous costs that recur for each flock and vary with egg production) about 23% higher and average total costs about 36% higher compared with the conventional house. The enriched housing system has average operating costs only about 4% higher compared with the conventional house, but average total costs are 13% higher than for the conventional house. © The Author 2015. Published by Oxford University Press on behalf of Poultry Science Association.

The Production Effect: Costs and Benefits in Free Recall

Science.gov (United States)

Jones, Angela C.; Pyc, Mary A.

2014-01-01

The production effect, the memorial benefit for information read aloud versus silently, has been touted as a simple memory improvement tool. The current experiments were designed to evaluate the relative costs and benefits of production using a free recall paradigm. Results extend beyond prior work showing a production effect only when production…

Computer software to estimate timber harvesting system production, cost, and revenue

Science.gov (United States)

Dr. John E. Baumgras; Dr. Chris B. LeDoux

1992-01-01

Large variations in timber harvesting cost and revenue can result from the differences between harvesting systems, the variable attributes of harvesting sites and timber stands, or changing product markets. Consequently, system and site specific estimates of production rates and costs are required to improve estimates of harvesting revenue. This paper describes...

Project feasibility and mine production costs

Energy Technology Data Exchange (ETDEWEB)

Longworth, C R

1987-01-01

The paper outlines the present investment environment existing in the Australian Coal Industry and places this in the context of the current world seaborne coal trade. Those factors which have the greatest influence on the viability of coal projects today, namely coal prices and quality, exchange rates, cash cost of production, capital and borrowing costs, infrastructure and government charges are dealt with briefly. The paper concludes by giving a schedule of those factors of a local character which can be changed to render projects more competitive and also presents some external factors beyond Australia's control which will, in part, influence the development of the industry in the next decade. 4 refs., 8 figs.

Health care and lost productivity costs of overweight and obesity in New Zealand.

Science.gov (United States)

Lal, Anita; Moodie, Marj; Ashton, Toni; Siahpush, Mohammad; Swinburn, Boyd

2012-12-01

To estimate the costs of health care and lost productivity attributable to overweight and obesity in New Zealand (NZ) in 2006. A prevalence-based approach to costing was used in which costs were calculated for all cases of disease in the year 2006. Population attributable fractions (PAFs) were calculated based on the relative risks obtained from large cohort studies and the prevalence of overweight and obesity. For each disease, the PAF was multiplied by the total health care cost. The costs of lost productivity associated with premature mortality were estimated using both the Human Capital approach (HCA) and Friction Cost approach (FCA). Health care costs attributable to overweight and obesity were estimated to be NZ$686m or 4.5% of New Zealand's total health care expenditure in 2006. The costs of lost productivity using the FCA were estimated to be NZ$98m and NZ$225m using the HCA. The combined costs of health care and lost productivity using the FCA were $784m and $911m using the HCA. The cost burden of overweight and obesity in NZ is considerable. Policies and interventions are urgently needed to reduce the prevalence of obesity thereby decreasing these substantial costs. © 2012 The Authors. ANZJPH © 2012 Public Health Association of Australia.

Performance and cost assessment of solar driven humidification dehumidification desalination system

International Nuclear Information System (INIS)

Zubair, M. Ifras; Al-Sulaiman, Fahad A.; Antar, M.A.; Al-Dini, Salem A.; Ibrahim, Nasiru I.

2017-01-01

Highlights: • Optimization of a new HDH system integrated solar evacuated tubes collectors was conducted. • The mathematical models developed for the collector and the HDH system were validated. • A multi-location analysis was then performed for six locations in Saudi Arabia. • Sharurah was found to have the highest annual output and Dhahran the lowest at 19,445 and 16,430 L. • The cost per liter of water produced varies from $0.032 to $0.038, depends on the location. - Abstract: A humidification-dehumidification (HDH) desalination system integrated with solar evacuated tubes was optimized. Then, the optimized system was assessed for the operation in different geographical locations, and the rate of freshwater production and cost per liter were determined in each location. The system design proposed in this paper uses a heat pipe design evacuated tube collector, which performs significantly better based on cost. An HDH desalination system with a closed-air/open-water loop, connected to the collector, was evaluated to determine the optimum operating parameters and the system performance during daytime (from 8 am to 3 pm), as well as the average day of each month for an entire year. The impact of the effectiveness of the humidifier and the dehumidifier, as well as, the number of collectors, were also studied. The analyses were performed for Dhahran, Jeddah, Riyadh, Sharurah, Qassim, and Tabuk to determine the effects of varying the geographical location. Sharurah has the highest calculated productivity of freshwater and Dhahran has the lowest at 19,445 and 16,430 L, respectively. To have a comprehensive study of the system proposed, a cost analysis was also performed to determine the feasibility of the system and the cost of water production. Results show that the price varied from $0.032 to $0.038 per liter for the locations evaluated.

Productivity costs decrease after endoscopic sinus surgery for refractory chronic rhinosinusitis.

Science.gov (United States)

Rudmik, Luke; Smith, Timothy L; Mace, Jess C; Schlosser, Rodney J; Hwang, Peter H; Soler, Zachary M

2016-03-01

The primary objective of this pilot study was to define the change in productivity costs following endoscopic sinus surgery (ESS) for chronic rhinosinusitis (CRS). Secondary objectives were to identify CRS-related characteristics that may influence the degree of productivity improvement after ESS. Prospective, multi-institutional, observational cohort study. The human capital approach was used to define productivity costs. Annual absenteeism, presenteeism, and lost leisure time were quantified to define annual lost productive time (LPT). LPT was monetized using the annual daily wage rates obtained from the 2012 US Census and the 2013 US Department of Labor statistics. Twenty-seven patients with refractory CRS who underwent ESS were followed for a mean of 15 months (range, 8-25 months). Following ESS, there were improvements in annual absenteeism (22 days reduced to 3 days), annual presenteeism (41 days reduced to 19 days), and annual household days lost (12 days reduced to 6 days). Overall, the preoperative productivity costs were reduced after ESS ($9,190 vs. $3,373, respectively; P productivity is negatively impacted by the presence of CRS. The outcomes from this study provide the first insights into the reduced productivity costs associated with receiving ESS for refractory CRS. Future studies with larger sample sizes will need to validate the results from this pilot study. 2c Laryngoscope, 126:570-574, 2016. © 2015 The American Laryngological, Rhinological and Otological Society, Inc.

Production Cost Efficiency and Profitability of Abakaliki Rice in ...

African Journals Online (AJOL)

acer

2014-11-17

Nov 17, 2014 ... positive and significant effect on the total cost of rice production. They were all significant ... failure is experienced due to the flooded rice field. In addition ... for random effects on production beyond the control .... Standard error.

Production cost of biomasses from eucalyptus and elefant grass for energy

Directory of Open Access Journals (Sweden)

Laurent Marie Roger Quéno

2011-09-01

Full Text Available This work established the unit energy cost generated from biomass of eucalyptus (Eucalyptus sp. and elephant grass (Pennisetum sp. and applied a sensitivity analysis to verify the influences of factors such as the silviculture of eucalyptus, production volume of each species, the cost of land and the interest rate. It was shown that the treatment of eucalyptus in very short rotation of 2 years with reform of stand every 6 years has a average cost of production higher than the traditional treatment of short rotation of 6 years with reform only at the age of 18. It was also observed that eucalyptus has a Production Cost on average of R$ 4,41 /Gj, lower than the elephant grass which is on average of R$ 5,44/Gj, which however has a higher annual capacity of dry matter production. The elephant grass has the possibility to compete with eucalyptus when a set of conditions is met: discount rate higher than or equal to 8%, High price of land, and elephant grass high volume production, greater than or equal to 35 tonnes of dry matter per hectare and year.

Impact of solar energy cost on water production cost of seawater desalination plants in Egypt

International Nuclear Information System (INIS)

Lamei, A.; Zaag, P. van der; Munch, E.

2008-01-01

Many countries in North Africa and the Middle East are experiencing localized water shortages and are now using desalination technologies with either reverse osmosis (RO) or thermal desalination to overcome part of this shortage. Desalination is performed using electricity, mostly generated from fossil fuels with associated greenhouse gas emissions. Increased fuel prices and concern over climate change are causing a push to shift to alternative sources of energy, such as solar energy, since solar radiation is abundant in this region all year round. This paper presents unit production costs and energy costs for 21 RO desalination plants in the region. An equation is proposed to estimate the unit production costs of RO desalination plants as a function of plant capacity, price of energy and specific energy consumption. This equation is used to calculate unit production costs for desalinated water using photovoltaic (PV) solar energy based on current and future PV module prices. Multiple PV cells are connected together to form a module or a panel. Unit production costs of desalination plants using solar energy are compared with conventionally generated electricity considering different prices for electricity. The paper presents prices for both PV and solar thermal energy. The paper discusses at which electricity price solar energy can be considered economical to be used for RO desalination; this is independent of RO plant capacity. For countries with electricity prices of 0.09 US$/kWh, solar-generated electricity (using PV) can be competitive starting from 2 US$/W p (W p is the number of Watts output under standard conditions of sunlight). For Egypt (price of 0.06 US$/kWh), solar-generated electricity starts to be competitive from 1 US$/W p . Solar energy is not cost competitive at the moment (at a current module price for PV systems including installation of 8 US$/W p ), but advances in the technology will continue to drive the prices down, whilst penalties on usage

Cost function approach for estimating derived demand for composite wood products

Science.gov (United States)

T. C. Marcin

1991-01-01

A cost function approach was examined for using the concept of duality between production and input factor demands. A translog cost function was used to represent residential construction costs and derived conditional factor demand equations. Alternative models were derived from the translog cost function by imposing parameter restrictions.

Working long hours: less productive but less costly? Firm-level evidence from Belgium

OpenAIRE

DELMEZ, Françoise; Vandenberghe, Vincent

2017-01-01

From the point of view of a profit-maximizing firm, the optimal number of working hours depends not only on the marginal productivity of hours but also on the marginal labour cost. This paper develops and assesses empirically a simple model of firms' decision making where productivity varies with hours and where the firm faces labour costs per worker that are invariant to the number of hours worked: i.e. quasi-fixed labour costs. Using Belgian firm-level data on production, labour costs, work...

Using wood products to mitigate climate change: External costs and structural change

Energy Technology Data Exchange (ETDEWEB)

Sathre, Roger; Gustavsson, Leif [Ecotechnology, Mid Sweden University, 831 25 Oestersund (Sweden)

2009-02-15

In this study we examine the use of wood products as a means to mitigate climate change. We describe the life cycle of wood products including forest growth, wood harvest and processing, and product use and disposal, focusing on the multiple roles of wood as both material and fuel. We present a comparative case study of a building constructed with either a wood or a reinforced concrete frame. We find that the production of wood building material uses less energy and emits less carbon than the production of reinforced concrete material. We compare the relative cost of the two building methods without environmental taxation, under the current Swedish industrial energy taxation regime, and in scenarios that incorporate estimates of the full social cost of carbon emission. We find that the inclusion of climate-related external costs improves the economic standing of wood construction vis-a-vis concrete construction. We conclude that policy instruments that internalise the external costs of carbon emission should encourage a structural change toward the increased use of sustainably produced wood products. (author)

A study in cost analysis of aggregate production as depending on drilling and blasting design

Science.gov (United States)

Bilim, Niyazi; Çelik, Arif; Kekeç, Bilgehan

2017-10-01

Since aggregate production has vital importance for many engineering projects-such as construction, highway and plant-mixed concrete production-this study was undertaken to determine how the costs for such production are affected by the design of drilling and blasting processes used. Aggregates are used in the production of concrete and asphalt, which are critical resources for the construction sector. The ongoing population increase and the growth of living standards around the world drive the increasing demand for these products. As demand grows, competition has naturally arisen among producers in the industry. Competition in the market has directly affected prices, which leads to the need for new measures and cost analysis on production costs. The cost calculation is one of the most important parameters in mining activities. Aggregate production operations include drilling, blasting, secondary crushing (if necessary), loading, hauling and crushing-screening, and each of these factors affects cost. In this study, drilling and blasting design parameters (such as hole diameter, hole depth, hole distance and burden) were investigated and evaluated for their effect on the total cost of quarrying these products, based on a particular quarry selected for this research. As the result of evaluation, the parameters actually driving costs have been identified, and their effects on the cost have been determined. In addition, some suggestions are presented regarding production design which may lead to avoiding increased production costs.

A deterministic aggregate production planning model considering quality of products

International Nuclear Information System (INIS)

Madadi, Najmeh; Wong, Kuan Yew

2013-01-01

Aggregate Production Planning (APP) is a medium-term planning which is concerned with the lowest-cost method of production planning to meet customers' requirements and to satisfy fluctuating demand over a planning time horizon. APP problem has been studied widely since it was introduced and formulated in 1950s. However, in several conducted studies in the APP area, most of the researchers have concentrated on some common objectives such as minimization of cost, fluctuation in the number of workers, and inventory level. Specifically, maintaining quality at the desirable level as an objective while minimizing cost has not been considered in previous studies. In this study, an attempt has been made to develop a multi-objective mixed integer linear programming model that serves those companies aiming to incur the minimum level of operational cost while maintaining quality at an acceptable level. In order to obtain the solution to the multi-objective model, the Fuzzy Goal Programming approach and max-min operator of Bellman-Zadeh were applied to the model. At the final step, IBM ILOG CPLEX Optimization Studio software was used to obtain the experimental results based on the data collected from an automotive parts manufacturing company. The results show that incorporating quality in the model imposes some costs, however a trade-off should be done between the cost resulting from producing products with higher quality and the cost that the firm may incur due to customer dissatisfaction and sale losses.

Accounting of allocation of production enterprises’ overhead costs

Directory of Open Access Journals (Sweden)

О.V. Ivaniuta

2016-12-01

Full Text Available Taking into account the complexity of engineering technological cycles, the use of traditional approaches to the allocation of overhead costs at the researching enterprises is inexpedient and inefficient. The authors find out that to solve this problem it is not enough to choose only one base of allocation because the formed prime cost with such an approach will not meet the reality. That is why it is suggested to use a multilevel allocation of overhead costs. The proposed approach involves the allocation of overhead costs at the following levels: fixed and variable, with shops of main and auxiliary production, calculation stations, some orders. Each level involves the selection of individual allocation bases that are grouped on economic, technological and integrated ones.

Final radioactive waste disposal: A European comparison of organization and costs

International Nuclear Information System (INIS)

Drasdo, P.

2000-01-01

The investigation is aimed to the comparison of organization structures of operators (plants) and governmental institutions concerned with the final disposal of radioactive waste. The study is covering Germany, France, United Kingdom and Sweden. The capital amount of total final disposal costs are the highest in Germany, the lowest in Sweden. This is also true for the final disposal costs that have to be financed by electricity production from nuclear power plants. The reasons for the differences with respect to economic efficiencies, political decisions and technical concepts are discussed

Economic Indicators of the Farm Sector. Costs of Production, 1986.

Science.gov (United States)

Economic Research Service (USDA), Washington, DC.

This report contains 121 tables that estimate the costs of production of various commodities on United States farms in 1986. The report first assesses costs and returns on a per-unit basis, such as one acre or one animal, under three sections of a budget: cash receipts, cash expenses, and economic costs. The budgets are based on national…

The lifetime cost of a magnetic refrigerator

DEFF Research Database (Denmark)

Bjørk, Rasmus; Bahl, Christian R.H.; Nielsen, Kaspar Kirstein

2016-01-01

The total cost of a 25 W average load magnetic refrigerator using commercial grade Gd is calculated using a numerical model. The price of magnetocaloric material, magnet material and cost of operation are considered, and all influence the total cost. The lowest combined total cost with a device...... lifetime of 15 years is found to be in the range $150-$400 depending on the price of the magnetocaloric and magnet material. The cost of the magnet is largest, followed closely by the cost of operation, while the cost of the magnetocaloric material is almost negligible. For the lowest cost device...... characteristics are based on the performance of a conventional A+++ refrigeration unit. In a rough life time cost comparison between the AMR device and such a unit we find similar costs, the AMR being slightly cheaper, assuming the cost of the magnet can be recuperated at end of life....

The production costs of the French nuclear fleet. Synthesis and conclusions. Technical note

International Nuclear Information System (INIS)

2017-09-01

Whereas the French Energy Multi-year Programming (PPE) notably aims at preserving the purchasing power of consumers and the competitiveness of energy prices, this note aims at reporting an assessment of the production cost of the French present nuclear fleet, i.e. the electric power cost at the output of the production installation. The authors first discuss the choice for the methodology of 'cash costs' for the decision to continue of not the exploitation of existing units. They propose a mean assessment of about 33 euro/MWh, state that the present nuclear-based power production in France is profitable, and consider that there is no 'investment wall' to be faced in the near future. They also state that nuclear costs are hardly supposed to increase because they are little sensitive to uranium prices. They consider that dismantling and waste costs are covered at more than 100 per cent by dedicated assets. A technical note comes with this discussion. It discusses cost calculation methods, the assessment of the production cost of French existing reactors (second generation), and some additional elements regarding some cost components

Cost-effectiveness of ergonomic interventions in production

NARCIS (Netherlands)

Looze, M.P. de; Koningsveld, E.P.A.; Fritzsche, L.; O'Sullivan, L.; Levizzari, A.

2008-01-01

Ergonomic measures to reduce or eliminate the risks for developing musculoskeletal disorders, usually affects the performance at work as well, e.g. productivity or quality. The costs and benefits that can be associated with ergonomic measures are highly diverse in nature. Prior to investing in any

Production costs: U.S. hydroelectric power plants, 4th Edition

International Nuclear Information System (INIS)

Anon.

1993-01-01

The book provides 1991 operation and maintenance expenses for over 800 conventional and pumped-storage hydroelectric power plants. Report shows operator and plant name, plant year-in-service, installed capacity, 1991 net generation, O ampersand M expenses, total production costs and current plant capitalization. Fifty eight percent of the utility-owned hydroelectric plants in the US are covered by this report. Data diskette provides additional capital and production cost accounts and number of employees for each plant

Productivity Costs Decrease After Endoscopic Sinus Surgery for Refractory Chronic Rhinosinusitis

Science.gov (United States)

Rudmik, Luke; Smith, Timothy L.; Mace, Jess C.; Schlosser, Rodney J.; Hwang, Peter H.; Soler, Zachary M.

2015-01-01

Objective The primary objective of this pilot study was to define the change in productivity costs following endoscopic sinus surgery (ESS) for chronic rhinosinusitis (CRS). Secondary objectives were to identify CRS-related characteristics that may influence the degree of productivity improvement after ESS. Study Design Prospective, multi-institutional, observational cohort study. Methods The human capital approach was used to define productivity costs. Annual absenteeism, presenteeism, and lost leisure time was quantified to define annual lost productive time (LPT). LPT was monetized using the annual daily wage rates obtained from the 2012 US National Census and the 2013 US Department of Labor statistics. Results 27 patients with refractory CRS who underwent ESS were followed for a mean of 15 [SD 4.0] months (range: 8 – 25 months). Following ESS, there were improvements in annual absenteeism (22 days reduced to 3 days), annual presenteeism (41 days reduced to 19 days), and annual household days lost (12 days reduced to 6 days). Overall, the preoperative productivity costs were reduced after ESS, $9,097 vs. $3,301, respectively (pproductivity is negatively impacted by the presence of CRS. The outcomes from this study provide the first insights into the reduced productivity costs associated with receiving ESS for refractory CRS. Future studies with larger sample sizes will need to validate the results from this pilot study. PMID:26371457

Vertical governance change and product differentiation under decreasing component costs

NARCIS (Netherlands)

Vermeulen, B.; Huisman, K.J.M.; Kok, de A.G.

In deciding on whether and when to outsource component production, firms should consider the trade-off between total production costs and the ability to horizontally differentiate products. We study the outsourcing decision in a duopoly under decreasing but uncertain market rates for components,

Vertical governance change and product differentiation under decreasing component costs

NARCIS (Netherlands)

Vermeulen, B.; Huisman, K.J.M.; Kok, A.G. de

2015-01-01

In deciding on whether and when to outsource component production, firms should consider the trade-off between total production costs and the ability to horizontally differentiate products. We study the outsourcing decision in a duopoly under decreasing but uncertain market rates for components,

Cost effective pilot scale production of biofertilizer using Rhizobium ...

African Journals Online (AJOL)

We standardized the protocol for pilot scale production of Rhizobium and Azotobacter biofertilizer technology using region specific and environmental stress compatible strains isolated from various agro climatic regions of Odisha, India. The cost benefit of biofertilizer production through a cottage industry is also presented.

MANUFACTURING PRICES, PRODUCTIVITY, AND LABOR COSTS IN 5 ECONOMIES

NARCIS (Netherlands)

VANARK, B

The United States continues to surge ahead of other major industrial economies in terms of lower prices, higher levels of labor productivity, and better unit labor cost performance; while the depreciation of the dollar plays an important role, real productivity gains are important as well.

DEPENDENCE OF ENERGY EFFICIENCY AND COST OF PRODUCTION

Directory of Open Access Journals (Sweden)

D. Sklyarov

2016-01-01

Full Text Available Economic systems exist on condition of receipt and spending of energy. Energy consumption is a necessary condition for the existence and functioning of the economic systems of any scale: macroeconomics, microeconomics, regional economy or the world economy.The economic system operates on the scale at which it is able to produce energy and get access to energy. Moreover, receipt and consumption of energy in the operation of the economic system is mainly determined by, the level of energy production from energy sources, since this level is determined by the level of energy consumption by industries and enterprises of the economy.Currently, the economic system does not produce energy in reserve. Thus, the question of energy effi ciency and energy saving was always acute.The article describes the energy efficiency and energy saving effect on the cost of production. Were used two methods: “costs and release” matrix and “price - value added” matrix. The result is the equation of dependence of energy efficiency and costs.

Productivity cost due to maternal ill health in Sri Lanka.

Directory of Open Access Journals (Sweden)

Suneth Agampodi

Full Text Available BACKGROUND: The global impact of maternal ill health on economic productivity is estimated to be over 15 billion USD per year. Global data on productivity cost associated with maternal ill health are limited to estimations based on secondary data. Purpose of our study was to determine the productivity cost due to maternal ill health during pregnancy in Sri Lanka. METHODS AND FINDINGS: We studied 466 pregnant women, aged 24 to 36 weeks, residing in Anuradhapura, Sri Lanka. A two stage cluster sampling procedure was used in a cross sectional design and all pregnant women were interviewed at clinic centers, using the culturally adapted Immpact tool kit for productivity cost assessment. Of the 466 pregnant women studied, 421 (90.3% reported at least one ill health condition during the pregnancy period, and 353 (83.8% of them had conditions affecting their daily life. Total incapacitation requiring another person to carry out all their routine activities was reported by 122 (26.1% of the women. In this study sample, during the last episode of ill health, total number of days lost due to absenteeism was 3,356 (32.9% of total loss and the days lost due to presenteeism was 6,832.8 (67.1% of the total loss. Of the 353 women with ill health conditions affecting their daily life, 280 (60% had coping strategies to recover loss of productivity. Of the coping strategies used to recover productivity loss during maternal ill health, 76.8% (n = 215 was an intra-household adaptation, and 22.8% (n = 64 was through social networks. Loss of productivity was 28.9 days per episode of maternal ill health. The mean productivity cost due to last episode of ill health in this sample was Rs.8,444.26 (95% CI-Rs.6888.74-Rs.9999.78. CONCLUSIONS: Maternal ill health has a major impact on household productivity and economy. The major impact is due to, generally ignored minor ailments during pregnancy.

Life-cycle cost analysis of adsorption cycles for desalination

KAUST Repository

Thu, Kyaw

2010-08-01

This paper presents the thermo-economic analysis of the adsorption desalination (AD) cycle that is driven by low-temperature waste heat from exhaust of industrial processes or renewable sources. The AD cycle uses an adsorbent such as the silica gel to desalt the sea or brackish water. Based on an experimental prototype AD plant, the life-cycle cost analysis of AD plants of assorted water production capacities has been simulated and these predictions are translated into unit cost of water production. Our results show that the specific energy consumption of the AD cycle is 1.38 kWh/m3 which is the lowest ever reported. For a plant capacity of 1000 m3/d, the AD cycle offers a unit cost of $0.457/m3 as compared to more than $0.9 for the average RO plants. Besides being cost-effective, the AD cycle is also environment-friendly as it emits less CO2 emission per m3 generated, typically 85% less, by comparison to an RO process. © 2010 Desalination Publications.

76 FR 71450 - Deduction for Qualified Film and Television Production Costs; Correction

Science.gov (United States)

2011-11-18

... Deduction for Qualified Film and Television Production Costs; Correction AGENCY: Internal Revenue Service... Register on Wednesday, October 19, 2011 (76 FR 64816) relating to deductions for the cost of producing film and television productions. DATES: This correction is effective on November 18, 2011, and is...

AN ECONOMIC STUDY OF ESTIMATING COST FUNCTION DATES PRODUCTION IN MURZUQ, SOUTHWESTERN LIBYA

Directory of Open Access Journals (Sweden)

Ahmad ARIDAH

2014-06-01

Full Text Available The results showed that fixed cost represented (41% of the total cost of Murzuq, also the variable cost amounted toapproximately (59% the total cost of Murzuq, and that the optimal size of the production of dates amounted toapproximately (2.01 tons per hectare for Murzuq ,and that production was more than the average actualproduction of dates for the Murzuq by nearly (0.37 tons per hectare , while reported results that the production thatmaximize profit of dates have hit (4.25 tons per hectare for Murzuq , and for community sample as a whole andthat production is more than the actual production of dates by (2.61 tons per hectare. It also showed the results ofthe field study that the average price per ton of harvest dates had been hit (1293.50 dinars for the total samplerespectively.

Effects of housing system on the costs of commercial egg production1

Science.gov (United States)

Matthews, W. A.; Sumner, D. A.

2014-01-01

This article reports the first publicly available egg production costs compared across 3 hen-housing systems. We collected detailed data from 2 flock cycles from a commercial egg farm operating a conventional barn, an aviary, and an enriched colony system at the same location. The farm employed the same operational and accounting procedures for each housing system. Results provide clear evidence that egg production costs are much higher for the aviary system than the other 2 housing systems. Feed costs per dozen eggs are somewhat higher for the aviary and lower for the enriched house compared with the conventional house. Labor costs are much lower for the conventional house than the other 2, and pullet costs are much higher for the aviary. Energy and miscellaneous costs are a minimal part of total operating costs and do not differ by housing system. Total capital investments per hen-capacity are much higher for the aviary and the enriched house. Capital costs per dozen eggs depend on assumptions about appropriate interest and depreciation rates. Using the same 10% rate for each housing system shows capital costs per dozen for the aviary and the enriched housing system are much higher than capital costs per dozen for the conventional house. The aviary has average operating costs (feed, labor, pullet, energy, and miscellaneous costs that recur for each flock and vary with egg production) about 23% higher and average total costs about 36% higher compared with the conventional house. The enriched housing system has average operating costs only about 4% higher compared with the conventional house, but average total costs are 13% higher than for the conventional house. PMID:25480736

Bridging environmental and financial cost of dairy production: A case study of Irish agricultural policy.

Science.gov (United States)

Chen, Wenhao; Holden, Nicholas M

2018-02-15

The Irish agricultural policy 'Food Harvest 2020' is a roadmap for sectoral expansion and Irish dairy farming is expected to intensify, which could influence the environmental and economic performance of Irish milk production. Evaluating the total environmental impacts and the real cost of Irish milk production is a key step towards understanding the possibility of sustainable production. This paper addresses two main issues: aggregation of environmental impacts of Irish milk production by monetization, to understand the real cost of Irish milk production, including the environmental costs; and the effect of the agricultural policy 'Food Harvest 2020' on total cost (combining financial cost and environmental cost) of Irish milk production. This study used 2013 Irish dairy farming as a baseline, and defined 'bottom', 'target' and 'optimum' scenarios, according to the change of elementary inputs required to meet agricultural policy ambitions. The study demonstrated that the three monetization methods, Stepwise 2006, Eco-cost 2012 and EPS 2000, could be used for aggregating different environmental impacts into monetary unit, and to provide an insight for evaluating policy related to total environmental performance. The results showed that the total environmental cost of Irish milk production could be greater than the financial cost (up to €0.53/kg energy corrected milk). The dairy expansion policy with improved herbage utilization and fertilizer application could reduce financial cost and minimize the total environmental cost of per unit milk produced. Copyright © 2017 Elsevier B.V. All rights reserved.

Productivity and cost of harvesting a stemwood biomass product from integrated cut-to-length harvest operations in Australian Pinus radiata plantations

International Nuclear Information System (INIS)

Walsh, D.; Strandgard, M.

2014-01-01

Significant quantities of woody biomass from the tops of trees and larger woody ‘waste’ pieces that fall outside existing sawlog and pulpwood specifications are left on site post final harvest in Australian radiata Pinus radiata (D. Don) (radiata pine) plantations. Woody biomass is a potential product for pulp making or energy generation. Commercial use of woody biomass from radiata pine plantations would add extra value to the Australian plantation estate through improved resource utilisation, and potentially reduced post-harvesting silvicultural costs. This study investigated the productivity and cost impact of the harvest and extraction to roadside of woody biomass in an integrated harvest operation in a typical Australian two machine (harvester/processor and forwarder), cut-to-length, clearfall operation in a mature, thinned radiata pine plantation. The harvest operation yielded 23 GMt/ha (5% of the total yield) of woody biomass (known as ‘fibreplus’), 443 GMt/ha of sawlogs and 28 GMt/ha of pulpwood. The mean quantity of biomass left on site was 128 GMt/ha, mainly consisting of branches and needles, sufficient to minimise nutrient loss and protect the soil from erosion. Woodchips derived from the fibreplus product were suitable for kraft pulp making, (when blended in small amounts with clean de-barked roundwood woodchips), and for energy generation. The method trialed with the fibreplus product being produced did not impact harvesting and processing productivity and costs, but extraction was 14% less productive. Through analysis of the productivities of each phase and development of a cost model the harvest and extraction of the fibreplus product was estimated to increase total unit costs by ∼4.9%. - Highlights: • Study of the productivity and cost impact of producing a woody biomass product. • We compared two scenarios – harvesting with and without the biomass product. • An additional 23 GMt/ha (5% of the total yield) of woody biomass

Preliminary analysis about reducing production costs in uranium mining and metallurgy at Fuzhou uranium mine

International Nuclear Information System (INIS)

Wu Sanmao

1999-01-01

The production costs in uranium ming and metallurgy have been analyzed quantitatively term by term according to present production situation for The Uranium Mining and Metallurgy Corp, which is part of Fuzhou Uranium Mine. The principal factors influencing on the production costs and the main means reducing the production costs have been found

Tractor-logging costs and production in old-growth redwood forests

Science.gov (United States)

Kenneth N. Boe

1963-01-01

A cost accounting analysis of full-scale logging operations in old-growth redwood during 2 years revealed that it cost $12.24 per M bd. ft. (gross Scribner log scale) to get logs on trucks. Road development costs averaged another $5.19 per M bd. ft. Felling-bucking production was calculated by average tree d.b.h. Both skidding and loading outputs per hour were...

Production costs of the Mexican poultry and pig sector

OpenAIRE

Horne, van, Peter; Hoste, Robert; Wagenberg, van, Coen

2018-01-01

Wageningen Economic Research conducted a study on the potential consequences of a free trade agreement between Mexico and the EU. The Dutch government is concerned that giving access to products from countries with a lower level of animal welfare could undermine the EU welfare standard. This study shows that production costs are lower in Mexico compared to the EU in all three sectors investigated: egg production, poultry meat and pig meat. In egg production in particular, the welfare standard...

Cost analysis when open surgeons perform minimally invasive hysterectomy.

Science.gov (United States)

Shepherd, Jonathan P; Kantartzis, Kelly L; Ahn, Ki Hoon; Bonidie, Michael J; Lee, Ted

2014-01-01

The costs to perform a hysterectomy are widely variable. Our objective was to determine hysterectomy costs by route and whether traditionally open surgeons lower costs when performing laparoscopy versus robotics. Hysterectomy costs including subcategories were collected from 2011 to 2013. Costs were skewed, so 2 statistical transformations were performed. Costs were compared by surgeon classification (open, laparoscopic, or robotic) and surgery route. A total of 4,871 hysterectomies were performed: 34.2% open, 50.7% laparoscopic, and 15.1% robotic. Laparoscopic hysterectomy had the lowest total costs (P depreciation included (P < .001) but similar costs if these variables were excluded. Although laparoscopic hysterectomy had lowest costs overall, robotics may be no more costly than laparoscopic hysterectomy when performed by surgeons who predominantly perform open hysterectomy.

METHODOLOGICAL BASES OF PRACTICAL APPLICATION OF PRODUCTION COSTS MANAGEMENT ACCOUNTING AT OIL AND FAT ENTERPRISES

Directory of Open Access Journals (Sweden)

E. Mykhalska

2014-12-01

Full Text Available Implementing of models of production costs management accounting in response to responsibility centers into Ukrainian oil and fat enterprises is the aim of their full optimization in terms of current competitive market. Setting production costs as an object of every single responsibility center will enable to update the whole range of accounting operations on costs paperwork, used raw and other materials assessment, cost recovery from labour costs with benefits-related deduction, depreciation recovery due to season production variability, services distribution of auxiliary and service departments and general production costs. In this regard, referring to the current costs accounting at oil and fat enterprises of Ukraine it should be admitted that the main purpose of the article is to explore the above-mentioned issues.

Indirect costs and workplace productivity loss associated with non-Hodgkin lymphoma.

Science.gov (United States)

Yu, Justin S; Hansen, Ryan N; Valderrama, Adriana; Carlson, Josh J

2016-11-01

The objective of this study was to examine indirect costs and workplace productivity loss (defined as an aggregate measure of absenteeism, short-term disability, and long-term disability days) associated with non-Hodgkin lymphoma (NHL) from a societal perspective in a commercially insured working-age United States population. The MarketScan(®) Commercial Claims and Encounters and Health and Productivity Management Databases (2007-2013) were used in this study, with controls matched 3:1 to NHL patients. In comparison to controls, NHL patients incurred significantly more workplace productivity loss (31.99 days; 95% CI: 25.24 days, 38.73 days; p workplace productivity and higher associated indirect costs.

PRODUCTIVITY AND COSTS OF PROCESSOR WORKING IN STANDS OF Eucalyptus grandis Hill ex Maiden

Directory of Open Access Journals (Sweden)

Bernardo Carlos Tarnowski

2009-09-01

Full Text Available In the present work a time study was conducted with the objective of adjusting equations to estimate the time of activities, productivity, operational costs and the production of the processor used in a harvest operation of stands of Eucalyptus grandis in plain topography in the state of Bahia, Brazil. The operational cycle of the processor consisted of the time spent to process a tree, and was divided in to stages, which were assessed using the methotodology of single activity times. The sampling unit was the operational cycle of the machine. The statistical analysis was based on regression analysis considering the selection procedure “stepwise”. With the adjusted equations it was possible to estimate the productivity of the machine taking into account the of tree diameter. Considering an operational efficiency of 70 % under the circumstances of the study, the productivity of the processor was 25,8 m3 cc/h, the operational costs 47,90 US$/h and the production costs 1,86 US$/m3 cc. On the basis of the obtained results it can be concluded that the time of tree processing has varied directly according to the diameter increase diameter; the preparation time, contrary to the processing time, only shows a weak correlation with tree diameter; productivity of the processor is directly proportional to tree diameter, when expressed in volume and inversely proportional when expressed in tree number; the costs per cubic meter of wood processed varies inversely with of increased diameter; from the operational costs, fixed costs had the highest proportion followed by the variable costs, administrative costs and costs for manpower; the production costs of the processor decreased exponentially with increasing tree diameter.

The cost analysis of material handling in Chinese traditional praying paper production plant

Science.gov (United States)

Nasution, H.; Budiman, I.; Salim, A.

2018-02-01

Chinese traditional praying paper industry is an industry which produced Chinese traditional religion praying paper. This kind of industry is rarely examined since it was only in Small and Medium Enterprise (SME’s- form). This industry produced various kinds of Chinese traditional paper products. The purpose of this research is to increase the amount of production, reduce waiting time and moving time, and reduce material handling cost. The research was conducted at prime production activities, consists of: calculate the capacity of the material handler, the frequency of movement, cost of material handling, and total cost of material handling. This displacement condition leads to an ineffective and inefficient production process. The alternative was developed using production judgment and aisle standard. Based on the observation results, it is possible to reduce displacement in the production. Using alternative which by-passed displacement from a rolled paper in the temporary warehouse to cutting and printing workstation, it can reduce material handling cost from 2.26 million rupiahs to 2.00 million rupiahs only for each batch of production. This result leads to increasing of production quantity, reducing waiting and moving time about 10% from the current condition.

Cost Minimization for Joint Energy Management and Production Scheduling Using Particle Swarm Optimization

Science.gov (United States)

Shah, Rahul H.

Production costs account for the largest share of the overall cost of manufacturing facilities. With the U.S. industrial sector becoming more and more competitive, manufacturers are looking for more cost and resource efficient working practices. Operations management and production planning have shown their capability to dramatically reduce manufacturing costs and increase system robustness. When implementing operations related decision making and planning, two fields that have shown to be most effective are maintenance and energy. Unfortunately, the current research that integrates both is limited. Additionally, these studies fail to consider parameter domains and optimization on joint energy and maintenance driven production planning. Accordingly, production planning methodology that considers maintenance and energy is investigated. Two models are presented to achieve well-rounded operating strategy. The first is a joint energy and maintenance production scheduling model. The second is a cost per part model considering maintenance, energy, and production. The proposed methodology will involve a Time-of-Use electricity demand response program, buffer and holding capacity, station reliability, production rate, station rated power, and more. In practice, the scheduling problem can be used to determine a joint energy, maintenance, and production schedule. Meanwhile, the cost per part model can be used to: (1) test the sensitivity of the obtained optimal production schedule and its corresponding savings by varying key production system parameters; and (2) to determine optimal system parameter combinations when using the joint energy, maintenance, and production planning model. Additionally, a factor analysis on the system parameters is conducted and the corresponding performance of the production schedule under variable parameter conditions, is evaluated. Also, parameter optimization guidelines that incorporate maintenance and energy parameter decision making in the

Techno-Economic Analysis of Biofuel Production from Macroalgae (Seaweed

Directory of Open Access Journals (Sweden)

Mohsen Soleymani

2017-11-01

Full Text Available A techno-economic evaluation of bioenergy production from macroalgae was carried out in this study. Six different scenarios were examined for the production of different energy products and by-products. Seaweed was produced either via the longline method or the grid method. Final products of these scenarios were either ethanol from fermentation, or electricity from anaerobic digestion (AD. By-products were digestate for AD, and animal feed, or electricity and digestate, for the fermentation pathway. Bioenergy breakeven selling prices were investigated according to the cost components and the feedstock supply chain, while suggestions for potential optimization of costs were provided. The lowest production level of dry seaweed to meet 0.93 ($/L for ethanol fuel and 0.07 $/kW-h for electricity was found to be 0.68 and 3.7 million tonnes (dry basis, respectively. At the moment, biofuel production from seaweed has been determined not to be economically feasible, but achieving economic production may be possible by lowering production costs and increasing the area under cultivation.

Techno-Economic Analysis of Biofuel Production from Macroalgae (Seaweed).

Science.gov (United States)

Soleymani, Mohsen; Rosentrater, Kurt A

2017-11-26

A techno-economic evaluation of bioenergy production from macroalgae was carried out in this study. Six different scenarios were examined for the production of different energy products and by-products. Seaweed was produced either via the longline method or the grid method. Final products of these scenarios were either ethanol from fermentation, or electricity from anaerobic digestion (AD). By-products were digestate for AD, and animal feed, or electricity and digestate, for the fermentation pathway. Bioenergy breakeven selling prices were investigated according to the cost components and the feedstock supply chain, while suggestions for potential optimization of costs were provided. The lowest production level of dry seaweed to meet 0.93 ($/L) for ethanol fuel and 0.07 $/kW-h for electricity was found to be 0.68 and 3.7 million tonnes (dry basis), respectively. At the moment, biofuel production from seaweed has been determined not to be economically feasible, but achieving economic production may be possible by lowering production costs and increasing the area under cultivation.

U3O8 production cost analysis study

International Nuclear Information System (INIS)

1978-08-01

This report presents the User's Manual for the computer program resulting from Bechtel's uranium production cost analysis. The model incorporates engineering and financial costs of sandstone mining and milling in the western United States. It does not consider exploration costs. The model was written in Fortran V, IBM compatible. Inputs from the user are such items as: ore grades, open pit or underground mines, acid or carbonate leach, and debt/equity ratio. The user may either input the desired discounted cash flow rate of return and obtain the necessary U 3 O 8 price, or input an estimated U 3 O 8 price and obtain the resulting discounted cash flow rate of return

Low cost manned Mars mission based on indigenous propellant production

Science.gov (United States)

Bruckner, A. P.; Cinnamon, M.; Hamling, S.; Mahn, K.; Phillips, J.; Westmark, V.

1993-01-01

The paper describes a low-cost approach to the manned exploration of Mars (which involves an unmanned mission followed two years later by a manned mission) based on near-term technologies and in situ propellant production. Particular attention is given to the basic mission architecture and its major components, including the orbital analysis, the unmanned segment, the Earth Return Vehicle, the aerobrake design, life sciences, guidance, communications, power, propellant production, the surface rovers, and Mars science. Also discussed are the cost per mission over an assumed 8-yr initiative.

UMTRA Project-Level Cost Reduction/Productivity Improvement Program manual

International Nuclear Information System (INIS)

1995-06-01

Mission of the Uranium Mill Tailings Remedial Action (UMTRA) Project Cost Reduction/Productivity Improvement Program (CR/PIP) is to contribute to the UMTRA Project's environmental restoration mission by providing the means to achieve and recognize continuous improvements and cost savings. This manual includes program definition, description of UMTRA project organizational responsibilities and interfaces with existing project functions, guidance to contractors, and definition of project-level functions

Costs of slurry separation technologies and alternative use of the solid fraction for biogas production or burning

DEFF Research Database (Denmark)

Jacobsen, Brian H.

2011-01-01

separation, in order to establish the overall costs. Key parameters are livestock density, transport distance, price of additional land and cost of separation. The conclusion is that unless land prices or prices on slurry agreements are very high, traditional handling of animal manure has the lowest costs......The purpose of this paper is to analyse different separation concepts in order to evaluate the overall costs based on a systems approach from stable to field. When livestock are produced in livestock intensive areas the distribution of manure without creating a surplus of nutrients is often....... Decanter separation can be the cheapest if area is limited and cooperation with neighbours is possible as large volumes reduce separation costs per tonne. Flocculation is the best if much P has to be removed from the farm in the solid fraction. Separation will in the future in many cases be combined...

Impacts of supplyshed-level differences in productivity and land Costs on the economics of hybrid poplar production in Minnesota, USA

Science.gov (United States)

William Lazarus; William L. Headlee; Ronald S. Zalesny

2015-01-01

The joint effects of poplar biomass productivity and land costs on poplar production economics were compared for 12 Minnesota counties and two genetic groups, using a process-based model (3-PG) to estimate productivity. The counties represent three levels of productivity and a range of land costs (annual rental rates) from $128/ha to $534/ha. An optimal rotation age...

Cost minimisation of product transhipment for physical distribution management

Directory of Open Access Journals (Sweden)

Obioma R. Nwaogbe

2013-11-01

Full Text Available The objective of this study was to determine the optimal allocation of shipments (least cost of two manufactured products between depots and places of consumption. In this study, the least-cost method was used in solving the transportation algorithm using Tora 2.0 version software. The study was necessary because of the high operating costs associated with physical distribution when deliveries are not properly planned and considered with reference to alternative strategies. In contrast, significant savings can be achieved by using techniques available for determining the cheapest methods of transporting goods from several origins to several destinations. Cost minimisation is a very useful approach to the solution of transportation problems.

Life cycle costs for the optimized production of hydrogen and biogas from microalgae

International Nuclear Information System (INIS)

Meyer, Markus A.; Weiss, Annika

2014-01-01

Despite the known advantages of microalgae compared with other biomass providers or fossil fuels, microalgae are predominately produced for high-value products. Economic constraints might limit the commercial energetic use of microalgae. Therefore, we identify the LCCs (life cycle costs) and economic hot spots for photoautotrophic hydrogen generation from photoautotrophically grown Chlamydomonas reinhardtii in a novel staggered PBR (photobioreactor) and the anaerobic digestion of the residual biomass to obtain biogas. The novel PBR aims at minimizing energy consumption for mixing and aeration and at optimizing the light conditions for algal growth. The LCCs per MJ amounted to 12.17 Euro for hydrogen and 0.99 Euro for biogas in 2011 for Germany. Market prices per MJ of 0.02 Euro for biogas and 0.04 Euro for hydrogen are considerably exceeded. Major contributors to operating costs, about 70% of total LCCs, are personnel and overhead costs. The investment costs consist to about 92% of those for the PBR with a share of 61% membrane costs. The choice of Madrid as another production location with higher incident solar irradiation and lower personnel costs reduces LCCs by about 40%. Projecting LCCs to 2030 with experience curves, the LCCs still exceed future market prices. - Highlights: • Life cycle cost assessment of hydrogen and biogas from microalgae in a novel photobioreactor. • Current and future (2030) economically viable production unlikely in Germany. • Personnel and photobioreactor costs are major cost drivers. • Changing the production location may significantly reduce the life cycle costs

Thermo-climatic cost of the domestic consumption products

Energy Technology Data Exchange (ETDEWEB)

Szargut, Jan; Stanek, Wojciech [Institute of Thermal Technology, Silesian University of Technology, Konarskiego 22, 44-100 Gliwice (Poland)

2010-02-15

The thermo-climatic cost (TCC) expresses the cumulative emission of CO{sub 2} burdening all the steps of production processes connected with the fabrication of particular consumption products. The TCC of the considered product results from the consumption of semi-finished products and energy carriers. The TCC of hydrocarbon fuels contains three components: the immediate emission of CO{sub 2} resulting from the combustion of carbon, the TCC of delivery and processing and the TCC resulting from import of fuels. The TCC-component connected with import results from the TCC of the domestic products exported in order to gain the financial means for import. The values of the TCC can be used for the minimization of climatic damages by the selection of the production technology or the design and operation parameters of new processes. (author)

The Impact of Supply Chain Cost on the Price of the Final Product

Directory of Open Access Journals (Sweden)

Indrė Lapinskaitė

2014-06-01

Full Text Available Nowadays, as consumption and production are growing enormously fast, companies are seeking for costs reduction aimed at ensuring competitiveness. In manufacturing companies, supply chain expenses play a colossal role in the cost of the final product. This paper focuses on the main processes in the logistics chain and their components. The authors analyse the relationship between the sup- ply chain expenses and the price of the final product, the classification of logistics chain costs and their minimization as an assumption for the competitiveness of the final price.

Design and analysis of fuel ethanol production from raw glycerol

International Nuclear Information System (INIS)

Posada, J.A.; Cardona, C.A.

2010-01-01

Three configurations for fuel ethanol production from raw glycerol using Escherichia coli were simulated and economically assessed using Aspen Plus and Aspen Icarus, respectively. These assessments considered raw glycerol (60 wt%) purification to both crude glycerol (88 wt%) and pure glycerol (98 wt%). The highest purification cost (PC) was obtained using pure glycerol due to its higher energy consumption in the distillation stage. In addition, the remaining methanol in the raw glycerol stream was recovered and recycled, decreasing the purification costs. The E. coli strain is able to convert crude glycerol (at 10 g/L or 20 g/L), or pure glycerol (at 10 g/L) to ethanol. Among these three glycerol concentrations, the lowest bioconversion cost was obtained when crude glycerol was diluted at 20 g/L. Purification and global production costs were compared with the commercial prices of glycerol and fuel ethanol from corn and sugarcane. Purification costs of raw glycerol were lower than previously reported values due to the methanol recovery. Global production costs for fuel ethanol from glycerol were lower than the reported values for corn-based production and higher than those for cane-based production. (author)

Productivity Losses and Costs in the Less-Common Systemic Autoimmune Rheumatic Diseases.

Science.gov (United States)

McCormick, Natalie; Marra, Carlo A; Aviña-Zubieta, J Antonio

2017-10-30

We synthesised the literature on productivity losses and costs in the less-common systemic autoimmune rheumatic diseases: Sjogren's syndrome (SjS), systemic sclerosis (SSc), poly/dermatomyositis (PM/DM), and systemic vasculitides (SV). Of 29 studies located, 12 were published 2012 onwards (SSc = 6, SjS = 2, PM/DM = 2, SV = 2). In these, 25% of PM/DM, and 21-26% of SV, were work disabled, 22% of SSc stopped work within 3 years of diagnosis, and annual costs of absenteeism in SSc averaged $12,024 2017 USD. Very few studies reported on costs, presenteeism (working at reduced levels), or unpaid productivity loss. Across multiple systemic autoimmune rheumatic diseases (SARDs), major drivers of lost productivity were generalised items like pain, depression, and fatigue, rather than disease-specific factors. Evidence suggests that work disability is common in SSc and strikes quickly. However, in SSc and other SARDs, more comprehensive estimates are needed, which include absenteeism and presenteeism from paid and unpaid work, costs, and drivers of productivity loss.

Computational Modelling of Large Scale Phage Production Using a Two-Stage Batch Process

Directory of Open Access Journals (Sweden)

Konrad Krysiak-Baltyn

2018-04-01

Full Text Available Cost effective and scalable methods for phage production are required to meet an increasing demand for phage, as an alternative to antibiotics. Computational models can assist the optimization of such production processes. A model is developed here that can simulate the dynamics of phage population growth and production in a two-stage, self-cycling process. The model incorporates variable infection parameters as a function of bacterial growth rate and employs ordinary differential equations, allowing application to a setup with multiple reactors. The model provides simple cost estimates as a function of key operational parameters including substrate concentration, feed volume and cycling times. For the phage and bacteria pairing examined, costs and productivity varied by three orders of magnitude, with the lowest cost found to be most sensitive to the influent substrate concentration and low level setting in the first vessel. An example case study of phage production is also presented, showing how parameter values affect the production costs and estimating production times. The approach presented is flexible and can be used to optimize phage production at laboratory or factory scale by minimizing costs or maximizing productivity.

Economic feasibility of invesment alternatives for reducing torula yeast' production cost

International Nuclear Information System (INIS)

Torres Fernández, Alfredo; Díaz de los Ríos, Manuel; Saura Laria, Gustavo

2016-01-01

The prices of ammonium salts which are used in the torula yeast production technology are very high nowadays. In the other hand, this technology has very high energy costs which are consumed by blowers in fermentation, separators machines and in the concentration and drying of yeast. In this paper, different technical alternatives are analyzed for reducing the production cost of torula yeast, through changes in production inputs, electric motors and the replacement of a portion of the fuel used for drying by biogas. Then, the economic feasibility in both currencies is evaluated for practical application. (author)

ECONOMIC FEASIBILITY OF INVESMENT ALTERNATIVES FOR REDUCING TORULA YEAST' PRODUCTION COST

Directory of Open Access Journals (Sweden)

Alfredo Torres Fernández

2016-01-01

Full Text Available The prices of ammonium salts which are used in the torula yeast production technology are very high nowadays. In the other hand, this technology has very high energy costs which are consumed by blowers in fermentation, separators machines and in the concentration and drying of yeast. In this paper, different technical alternatives are analyzed for reducing the production cost of torula yeast, through changes in production inputs, electric motors and the replacement of a portion of the fuel used for drying by biogas. Then, the economic feasibility in both currencies is evaluated for practical application.

Customer Focused Product Design Using Integrated Model of Target Costing, Quality Function Deployment and Value Engineering

Directory of Open Access Journals (Sweden)

Hossein Rezaei Dolatabadi

2013-01-01

Full Text Available Target costing by integrating customer requirements, technical attributes and cost information into the product design phase and eliminating the non-value added functions, plays a vital role in different phases of the product life cycle. Quality Function Deployment (QFD and Value Engineering (VE are two techniques which can be used for applying target costing, successfully. The purpose of this paper is to propose an integrated model of target costing, QFD and VE to explore the role of target costing in managing product costs while promoting quality specifications meeting customers’ needs. F indings indicate that the integration of target costing, QFD and VE is an essential technique in managing the costs of production process. Findings also imply that integration of the three techniques provides a competitive cost advantage to companies.

Productivity cost due to postpartum ill health: A cross-sectional study in Sri Lanka.

Science.gov (United States)

Wickramasinghe, Nuwan Darshana; Horton, Jennifer; Darshika, Ishani; Galgamuwa, Kaushila Dinithi; Ranasinghe, Wasantha Pradeep; Agampodi, Thilini Chanchala; Agampodi, Suneth Buddhika

2017-01-01

Even though postpartum morbidity continues to cause high disease burden in maternal morbidity and mortality across the globe, the literature pertaining to resultant productivity loss is scarce. Hence, the present study aimed at determining the productivity loss and associated cost of episodes of postpartum ill health. A cross sectional study was conducted in two Medical Officer of Heath areas in the Anuradhapura district, Sri Lanka in 2011, among 407 women residing in Anuradhapura district with an infant aged between 8 to 24 weeks. Validated interviewer administered questionnaires, including the IMMPACT productivity cost tool, were used to collect data on self-reported episodes of postpartum ill health. The productivity loss was calculated as the sum of days lost due to partial and total incapacitation. The adjusted productivity loss for coping strategies was calculated. Productivity cost, both total and adjusted, were calculated based on the mean daily per capita income of the study sample. Of the 407 participants, 161(39.6%) reported at least one episode of postpartum illness. Hospitalisations were reported by 27 (16.8%) of all symptomatic postpartum women. Common symptoms of postpartum ill health were pain/infection at either episiotomy or surgical site (n = 44, 27.3%), lower abdominal pain (n = 40, 24.8%) and backache (n = 27, 16.8%). The mean productivity loss per episode of ill health was 15 days (SD = 7.8 days) and the mean productivity loss per episode after adjusting for coping strategies was 7.9 days (SD = 4.4 days). The mean productivity cost per an episode was US$ 34.2(95%CI US$ 26.7-41.6) and the mean productivity cost per an episode after adjusting for coping strategies was US$ 18.0 (95%CI US$ 14.1-22.0). The prevalence of self-reported postpartum ill health, associated productivity loss and cost were high in the study sample and the main contributors were preventable conditions including pain and infection. Thus, effective pain management and proper

Cost per remission and cost per response with infliximab, adalimumab, and golimumab for the treatment of moderately-to-severely active ulcerative colitis.

Science.gov (United States)

Toor, Kabirraaj; Druyts, Eric; Jansen, Jeroen P; Thorlund, Kristian

2015-06-01

To determine the short-term costs per sustained remission and sustained response of three tumor necrosis factor inhibitors (infliximab, adalimumab, and golimumab) in comparison to conventional therapy for the treatment of moderately-to-severely active ulcerative colitis. A probabilistic Markov model was developed. This included an 8-week induction period, and 22 subsequent 2-week cycles (up to 1 year). The model included three disease states: remission, response, and relapse. Costs were from a Canadian public payer perspective. Estimates for the additional cost per 1 year of sustained remission and sustained response were obtained. Golimumab 100 mg provided the lowest cost per additional remission ($935) and cost per additional response ($701) compared with conventional therapy. Golimumab 50 mg yielded slightly higher costs than golimumab 100 mg. Infliximab was associated with the largest additional number of estimated remissions and responses, but also higher cost at $1975 per remission and $1311 per response. Adalimumab was associated with the largest cost per remission ($7430) and cost per response ($2361). The cost per additional remission and cost per additional response associated with infliximab vs golimumab 100 mg was $14,659 and $4753, respectively. The results suggest that the additional cost of 1 full year of remission and response are lowest with golimumab 100 mg, followed by golimumab 50 mg. Although infliximab has the highest efficacy, it did not exhibit the lowest cost per additional remission or response. Adalimumab produced the highest cost per additional remission and response.

Europe the continent with the lowest fertility

NARCIS (Netherlands)

Baird, D. T.; Collins, J.; Evers, J. L. H.; Leridon, H.; Lutz, W.; Velde, E. Te; Thevenon, O.; Crosignani, P. G.; Devroey, P.; Diedrich, K.; Fauser, B. C. J. M.; Fraser, L.; Geraedts, J. P. M.; Gianaroli, L.; Glasier, A.; Sunde, A.; Tarlatzis, B.; Van Steirteghem, A.; Veiga, A.

2010-01-01

INTRODUCTION: Although fertility rates are falling in many countries, Europe is the continent with the lowest total fertility rate (TFR). This review assesses trends in fertility rates, explores possible health and social factors and reviews the impact of health and social interventions designed to

Computer-aided production in the chemical industry

International Nuclear Information System (INIS)

Perez Castellanos, J.L.

1993-01-01

In these centres, chlorine is produced by means of electrochemical reactions which, moreover, originate other products such as soda and potash. Both the chlorine and the soda and potash are sold on demand in markets associated to the production centres and at prices which vary depending on the period of sale and the centre. Production surpluses of any one of the centres may be transported to any other so as to optimize the overall supply-demand combination of all the plants. The relevant transport and storage costs may also vary depending on the centre and on the time of year. The main problem lies in controlling the multiple combinations which permit a determined overall annual production of chlorine at the lowest possible cost. What is important is not only the quantity manufactured per month (for sale and self-consumption, or storage), but also how much is manufactured at each production centre. The monthly production of a plant could be obtained in different ways (modulations) giving rise to different production power costs (due to the electrolysis process itself, or because of the structure of electricity rates). In the first step towards solving the problem, for each plant and each month, a range of chlorine productions was selected -per plant and per month- with their corresponding electricity bills for the entire plant (once again, the rating structure makes it difficult to distinguish which part of the bill refers to electrolysis and which does not). These electric bills can be considered to be optimum in that they are minimal for a determined production of chlorine. Otherwise, in view of the targeted monthly production of chlorine, the current in the electrolysis is modulated so that the electricity bill shows the lowest possible amount, while minimum technical conditions are respected and the rest of the plant remains constant. In the assumptions described, the essence of the problem consists in deciding how much to produce every month and where to

Integrated batch production and maintenance scheduling for multiple items processed on a deteriorating machine to minimize total production and maintenance costs with due date constraint

Directory of Open Access Journals (Sweden)

Zahedi Zahedi

2016-04-01

Full Text Available This paper discusses an integrated model of batch production and maintenance scheduling on a deteriorating machine producing multiple items to be delivered at a common due date. The model describes the trade-off between total inventory cost and maintenance cost as the increase of production run length. The production run length is a time bucket between two consecutive preventive maintenance activities. The objective function of the model is to minimize total cost consisting of in process and completed part inventory costs, setup cost, preventive and corrective maintenance costs and rework cost. The problem is to determine the optimal production run length and to schedule the batches obtained from determining the production run length in order to minimize total cost.

Impacts of facility size and location decisions on ethanol production cost

International Nuclear Information System (INIS)

Kocoloski, Matt; Michael Griffin, W.; Scott Matthews, H.

2011-01-01

Cellulosic ethanol has been identified as a promising alternative to fossil fuels to provide energy for the transportation sector. One of the obstacles cellulosic ethanol must overcome in order to contribute to transportation energy demand is the infrastructure required to produce and distribute the fuel. Given a nascent cellulosic ethanol industry, locating cellulosic ethanol refineries and creating the accompanying infrastructure is essentially a greenfield problem that may benefit greatly from quantitative analysis. This study models cellulosic ethanol infrastructure investment using a mixed integer program (MIP) that locates ethanol refineries and connects these refineries to the biomass supplies and ethanol demands in a way that minimizes the total cost. For the single- and multi-state regions examined in this study, larger facilities can decrease ethanol costs by $0.20-0.30 per gallon, and placing these facilities in locations that minimize feedstock and product transportation costs can decrease ethanol costs by up to $0.25 per gallon compared to uninformed placement that could result from influences such as local subsidies to encourage economic development. To best benefit society, policies should allow for incentives that encourage these low-cost production scenarios and avoid politically motivated siting of plants. - Research highlights: → Mixed-integer programming can be used to model ethanol infrastructure investment. → Large cellulosic ethanol facilities can decrease production cost by $0.20/gallon. → Optimized facility placement can save $0.25/gallon.

Formation of initial cost of stocks of own production

Directory of Open Access Journals (Sweden)

Elena Krukovskiy

2016-06-01

Full Text Available The concept and component stocks according to national accounting standards are revealed. The procedure for forming the initial value of the stock, depending on the way they arrive at the company according to the guidelines as well as methods for evaluating stocks of own production is grounded. The methodological principles of formation of information on stocks and the disclosure of its financial statements are considered. In the article investigated the procedure of forming the original value of stocks depending on how they flow to the enterprise. Number of methods of assessment of inventory, which can be used to reflect their value in the accounting and financial reporting, and methods of evaluation of own production is characterized. Identified costs are included in the initial cost of inventories, including inventories of own production. The estimation of the definition of agricultural produce at fair value and features of its application in the enterprise is proposed by authors.

Spatial and temporal aspects of grain accumulation costs for ethanol production: An Australian case study

International Nuclear Information System (INIS)

Anderton, Nikki; Kingwell, Ross

2008-01-01

Ethanol production is increasingly commonplace in many grain-producing regions. This paper uses the grain-producing region of south-western Australia to illustrate spatial and temporal aspects of grain accumulation costs for ethanol production. Specifically, this study examines how price variability of various wheat grades, combined with spatial and temporal variability in production of those grades, affects the costs of grain accumulation. These costs are the main components of an ethanol plant's operating costs so lessening these costs can offer a comparative advantage for a plant owner. Logistics models based on mathematical programming are constructed for a range of plant sizes and locations for ethanol production. Modelling results identify low-cost sites that generate cost savings, in present value terms, of between 5 and 7.5 per cent, depending on plant size, over the 9-year study period. At all locations, small to medium-sized plants offer advantages of lower and less variable costs of grain accumulation. Yet, all locations and all plant sizes are characterised by marked volatility in the cost of grain accumulation. The profitability of ethanol production based on wheat in this region of Australia is particularly exposed to any prolonged period of high grain prices relative to petroleum prices, given current biofuel-policy settings in Australia. (author)

EFFECT OF CSR ON PRODUCT DIFFERENTIATION IN THE PRESENCE OF COST ADVANTAGE

Directory of Open Access Journals (Sweden)

Samar K. Mukhopadhyay

2017-03-01

Full Text Available Corporate social responsibility (CSR, once thought of only a philanthropic activity of a firm, is now treated as a serious business strategy that can contribute to a firm’s profitability. The seemingly altruistic activity helps build the firm’s image with all the stakeholders including its customers so that it has the potential to increase the firm’s profit. This fact is now well established in research literature. Product differentiation is another corporate strategy that is pursued by some companies in order to offer a distinctive product in the market to avoid competition, charge premium price, and increase profit. What is not known is that when two firms compete in a Hotelling type product differentiation line, how much this product differentiation is affected by the extent of the CSR activity of a firm. Our study is conducted in a game-theoretic setting where the CSR firm is competing with a non-CSR firm. The CSR firm maximizes a convex combination of its own profit and a form of social utility function, while the non-CSR firm maximizes its own profit only. The CSR firm is also assumed to have a technological advantage that reduces its production cost. The interaction of the effects of both the extent of CSR and the extent of this production cost advantage is also considered. We also study a scenario of asymmetric information. Our main results include that the degree of product differentiation is reduced when CSR is practiced. On the other hand, product differentiation increases with the production cost advantage. The interaction between the two factors – CSR activity and cost advantage – is also studied.

New information on world uranium resource, production, supply and demand

International Nuclear Information System (INIS)

Zhang Jianguo; Meng Jin

2006-01-01

New information on world uranium resource, production, supply and demand is introduced. Up to now, explored uranium resources at production cost < USD 40/kg U has 2523257 t uranium; production cost < USD 80/kg U has 5911514 t uranium; production cost < USD130/kg U has 11280488 t uranium; and cost range unassigned has 3102000 t uranium. At moment, the demand uranium of each year is about 67000 t U. After 2020, world uranium demand will rise well above 100000 t per annum with sharp revival of nuclear power plants. With three kinds of economic growth the cumulative requirement of the uranium in low demand case, middle demand case and high demand case from 2000 to 2050 is 3390000, 5394100 and 7577300 t respectively. In the world market uranium price rises from 20 years lowest 18.2 USD/kg U to 75.4 USD/kg U. In 2003, global uranium product is about 35385 t U, and 2004, global uranium product is about 40475 t U. In 2004's world uranium production underground mining, open pit, in situ, by product, and combination account for 39%, 27%, 19%, 11% and 4% respectively. (authors)

Examining the association of smoking with work productivity and associated costs in Japan.

Science.gov (United States)

Suwa, Kiyomi; Flores, Natalia M; Yoshikawa, Reiko; Goto, Rei; Vietri, Jeffrey; Igarashi, Ataru

2017-09-01

Smoking is associated with significant health and economic burden globally, including an increased risk of many leading causes of mortality and significant impairments in work productivity. This burden is attenuated by successful tobacco cessation, including reduced risk of disease and improved productivity. The current study aimed to show the benefits of smoking cessation for workplace productivity and decreased costs associated with loss of work impairment. The data source was the 2011 Japan National Health and Wellness Survey (n = 30,000). Respondents aged 20-64 were used in the analyses (n = 23,738) and were categorized into: current smokers, former smokers, and never smokers. Generalized linear models controlling for demographics and health characteristics examined the relationship of smoking status with the Work Productivity and Activity Impairment questionnaire (WPAI-GH) endpoints, as well as estimated indirect costs. Current smokers reported the greatest overall work impairment, including absenteeism (i.e. work time missed) and presenteeism (i.e. impairment while at work); however, after controlling for covariates, there were no significant differences between former smokers and never smokers on overall work impairment. Current smokers and former smokers had greater activity impairment (i.e. impairment in daily activities) than never smokers. Current smokers reported the highest indirect costs (i.e. costs associated with work impairment); however, after controlling for covariates, there were no significant differences between former smokers and never smokers on indirect costs. Smoking exerts a large health and economic burden; however, smoking cessation attenuates this burden. The current study provides important further evidence of this association, with former smokers appearing statistically indistinguishable from never smokers in terms of work productivity loss and associated indirect costs among a large representative sample of Japanese workers

A REVIEW OF ESTIMATION OF SOFTWARE PRODUCTS DEVELOPMENT COSTS

Directory of Open Access Journals (Sweden)

Edin Osmanbegović

2017-01-01

Full Text Available In the modern business and management of business processes, the standardization of procedures allows the creation of added value, increasing competitiveness and success in the business of an organization. Evaluation of the budget for software development is crucial to the success of an IT project, because the inability to make a realistic assessment leads to inadequate project plans, customer dissatisfaction, poor quality of software products, and reduced profits. In order to minimize such situations, making accurate and reliable software cost estimation should be carried out at all stages of the project life cycle. Although hundreds of research articles focusing on the application of different methods of budget estimates of the software product have been published so far, there is no comprehensive review of the current situation or review of research trends in the budget estimates of the software product. This paper aims to create a framework for estimation of costs of development of software products by providing an overview of the most influential researchers, the most influential articles published in the WoS database, the most used keywords for searching the articles, as well as a review of the estimation techniques used in budget estimates of the software product.

Asymmetric Switch Costs in numeral naming and number word reading: Implications for models of bilingual language production

Directory of Open Access Journals (Sweden)

Michael eReynolds

2016-01-01

Full Text Available One approach used to gain insight into the processes underlying bilingual language comprehension and production examines the costs that arise from switching languages. For unbalanced bilinguals, asymmetric switch costs are reported in speech production, where the switch cost for L1 is larger than the switch cost for L2, whereas, symmetric switch costs are reported in language comprehension tasks, where the cost of switching is the same for L1 and L2. Presently, it is unclear why asymmetric switch costs are observed in speech production, but not in language comprehension. Three experiments are reported that simultaneously examine methodological explanations of task related differences in the switch cost asymmetry and the predictions of three accounts of the switch cost asymmetry in speech production. The results of these experiments suggest that (1 the type of language task (comprehension vs. production determines whether an asymmetric switch cost is observed and (2 at least some of the switch cost asymmetry arises within the language system.

Evaluation of syngas production unit cost of bio-gasification facility using regression analysis techniques

Energy Technology Data Exchange (ETDEWEB)

Deng, Yangyang; Parajuli, Prem B.

2011-08-10

Evaluation of economic feasibility of a bio-gasification facility needs understanding of its unit cost under different production capacities. The objective of this study was to evaluate the unit cost of syngas production at capacities from 60 through 1800Nm 3/h using an economic model with three regression analysis techniques (simple regression, reciprocal regression, and log-log regression). The preliminary result of this study showed that reciprocal regression analysis technique had the best fit curve between per unit cost and production capacity, with sum of error squares (SES) lower than 0.001 and coefficient of determination of (R 2) 0.996. The regression analysis techniques determined the minimum unit cost of syngas production for micro-scale bio-gasification facilities of $0.052/Nm 3, under the capacity of 2,880 Nm 3/h. The results of this study suggest that to reduce cost, facilities should run at a high production capacity. In addition, the contribution of this technique could be the new categorical criterion to evaluate micro-scale bio-gasification facility from the perspective of economic analysis.

A Comparison of Carbon Footprint and Production Cost of Different Pasta Products Based on Whole Egg and Pea Flour.

Science.gov (United States)

Nette, Antonia; Wolf, Patricia; Schlüter, Oliver; Meyer-Aurich, Andreas

2016-03-04

Feed and food production are inter alia reasons for high greenhouse gas emissions. Greenhouse gas emissions could be reduced by the replacement of animal components with plant components in processed food products, such as pasta. The main components currently used for pasta are semolina, and water, as well as additional egg. The hypothesis of this paper is that the substitution of whole egg with plant-based ingredients, for example from peas, in such a product might lead to reduced greenhouse gas emissions (GHG) and thus a reduced carbon footprint at economically reasonable costs. The costs and carbon footprints of two pasta types, produced with egg or pea protein, are calculated. Plant protein-based pasta products proved to cause 0.57 kg CO₂ equivalents (CO₂eq) (31%) per kg pasta less greenhouse gas emissions than animal-based pasta, while the cost of production increases by 10% to 3.00 €/kg pasta.

Production-Built Homes: The Cost Advantages of Smart Growth

Science.gov (United States)

This study identifies the components and techniques of home building in traditional versus conventional developments, and attempts to help production builders better understand the cost differences between the two types of developments.

Improving Power System Modeling. A Tool to Link Capacity Expansion and Production Cost Models

Energy Technology Data Exchange (ETDEWEB)

Diakov, Victor [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cole, Wesley [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sullivan, Patrick [National Renewable Energy Lab. (NREL), Golden, CO (United States); Brinkman, Gregory [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2015-11-01

Capacity expansion models (CEM) provide a high-level long-term view at the prospects of the evolving power system. In simulating the possibilities of long-term capacity expansion, it is important to maintain the viability of power system operation in the short-term (daily, hourly and sub-hourly) scales. Production-cost models (PCM) simulate routine power system operation on these shorter time scales using detailed load, transmission and generation fleet data by minimizing production costs and following reliability requirements. When based on CEM 'predictions' about generating unit retirements and buildup, PCM provide more detailed simulation for the short-term system operation and, consequently, may confirm the validity of capacity expansion predictions. Further, production cost model simulations of a system that is based on capacity expansion model solution are 'evolutionary' sound: the generator mix is the result of logical sequence of unit retirement and buildup resulting from policy and incentives. The above has motivated us to bridge CEM with PCM by building a capacity expansion - to - production cost model Linking Tool (CEPCoLT). The Linking Tool is built to onset capacity expansion model prescriptions onto production cost model inputs. NREL's ReEDS and Energy Examplar's PLEXOS are the capacity expansion and the production cost models, respectively. Via the Linking Tool, PLEXOS provides details of operation for the regionally-defined ReEDS scenarios.

Proposal to realize a cost breakthrough in carbon-13 production by photochemical separation

International Nuclear Information System (INIS)

Marling, J.B.

1979-10-01

A cost breakthrough can now be made in photochemical production of the rare stable isotope carbon-13. This cost breakthrough is achieved by CO 2 laser infrared multiple-photon dissociation of any of several halocarbons (Freon derivatives) such as CF 3 Cl, CF 3 Br, or CF 2 Cl 2 . The single-step carbon-13 enrichment factor for this process is approximately 50, yielding 30% pure C-13 in one step, or up to 97% pure C-13 in two steps. A three-fold carbon-13 cost reduction to below $20/gram is expected to be achieved in a small laboratory-scale demonstration facility capable of producing 4 to 8 kg/year of carbon-13, using presently available pulsed CO 2 TEA lasers at an average power level of 50 watts. Personnel costs dominate the attainable C-13 production costs in a small photochemical enrichment facility. A price reduction to $2/gm carbon-13 is feasible at carbon-13 production levels of 100 to 1000 kg/year, dominated by the Freon raw material costs

Labor market productivity costs for caregivers of children with spina bifida: a population-based analysis.

Science.gov (United States)

Tilford, John M; Grosse, Scott D; Goodman, Allen C; Li, Kemeng

2009-01-01

Caregiver productivity costs are an important component of the overall cost of care for individuals with birth defects and developmental disabilities, yet few studies provide estimates for use in economic evaluations. This study estimates labor market productivity costs for caregivers of children and adolescents with spina bifida. Case families were recruited from a state birth defects registry in Arkansas. Primary caregivers of children with spina bifida (N = 98) reported their employment status in the past year and demographic characteristics. Controls were abstracted from the Current Population Survey covering the state of Arkansas for the same time period (N = 416). Estimates from regression analyses of labor market outcomes were used to calculate differences in hours worked per week and lifetime costs. Caregivers of children with spina bifida worked an annual average of 7.5 to 11.3 hours less per week depending on the disability severity. Differences in work hours by caregivers of children with spina bifida translated into lifetime costs of $133,755 in 2002 dollars using a 3% discount rate and an age- and sex-adjusted earnings profile. Including caregivers' labor market productivity costs in prevention effectiveness estimates raises the net cost savings per averted case of spina bifida by 48% over the medical care costs alone. Information on labor market productivity costs for caregivers can be used to better inform economic evaluations of prevention and treatment strategies for spina bifida. Cost-effectiveness calculations that omit caregiver productivity costs substantially overstate the net costs of the intervention and underestimate societal value.

Low-Cost Production of Photonic Bandgap Materials Through Bubbling

National Research Council Canada - National Science Library

O'Brien, Daniel J; Wetzel, Eric D

2007-01-01

.... This report proposes a simple low-cost method for PBGM production. A device has been constructed that produces micrometer-sized, monodisperse bubbles that can be assembled into a crystal lattice by surface tension...

Social costs of loss in productivity-related absenteeism in Poland

Directory of Open Access Journals (Sweden)

Agnieszka Genowska

2017-10-01

Full Text Available Objectives: The aim of this study was to estimate indirect costs associated with losses in productivity due to sickness absence among registered workers in Poland. Material and Methods: Data on sick leave durations in 2013 was obtained from the Social Insurance Institution (SII (Zakład Ubezpieczeń Społecznych – ZUS. Based on the number of assumptions, this data was used for calculating absence durations. The costs of lost productivity were estimated on the basis of the measure of gross value added. Results: Estimated losses in productivity due to absenteeism in 2013 together accounted for 4.33% of gross domestic product (GDP (17.09 billion euro. In the female population, the total value of losses amounted to 9.66 billion euro, but excluding the costs of pregnancy, childbirth, and puerperium (2.96 billion euro, it was 6.7 billion euro. In the male population, the loss amounted to 7.43 billion euro. The highest overall costs of sickness absence based on age were found in the age group of 30–39 years (5.14 billion euro, including pregnancy, childbirth, and puerperium – 1.474 billion euro; respiratory diseases – 0.632 billion euro, injuries and poisonings – 0.62 billion euro. In the group of people aged > 40 years, the highest cost was generated by bone-muscular diseases (1.553 billion euro and injuries and poisoning (1.251 billion euro. Higher losses in the productivity of women in addition to pregnancy, childbirth, and puerperium were due to mental and behavioral disorders (0.71 billion euro, diseases of the genitourinary system (0.38 billion euro, and neoplasms (0.35 billion euro. At the same time, in men, compared to women, we observed higher losses due to injuries and poisoning (1.65 billion euro, and diseases of musculoskeletal (1.26 billion euro, nervous (0.79 billion euro, circulatory (0.65 billion euro, and digestive (0.41 billion euro systems. Conclusions: Improvement and further development of effective strategies for

Cost calculation model concerning small-scale production of chips and split firewood

International Nuclear Information System (INIS)

Ryynaenen, S.; Naett, H.; Valkonen, J.

1995-01-01

The TTS-Institute's Forestry Department has developed a computer-based cost calculation model for the production of wood chips and split firewood. This development work was carried out in conjunction with the nation-wide BIOENERGY -research programme. The said calculation model eases and speeds up the calculation of unit costs and resource needs in harvesting systems for wood chips and split firewood. The model also enables the user to find out how changes in the productivity and costs bases of different harvesting chains influences the unit costs of the system as a whole. The undertaking was composed of the following parts: clarification and modification of productivity bases for application in the model as mathematical models, clarification of machine and device costs bases, designing of the structure and functions of the calculation model, construction and testing of the model's 0-version, model calculations concerning typical chains, review of calculation bases, and charting of development needs focusing on the model. The calculation model was developed to serve research needs, but with further development it could be useful as a tool in forestry and agricultural extension work, related schools and colleges, and in the hands of firewood producers. (author)

Production possibility frontier analysis of biodiesel from waste cooking oil

International Nuclear Information System (INIS)

Kagawa, Shigemi; Takezono, Kanako; Suh, Sangwon; Kudoh, Yuki

2013-01-01

This paper presents an assessment of the productive efficiency of an advanced biodiesel plant in Japan using Data Envelopment Analysis (DEA). The empirical analysis uses monthly input data (waste cooking oil, methanol, potassium hydroxide, power consumption, and the truck diesel fuel used for the procurement of waste cooking oil) and output data (biodiesel) of a biodiesel fuel plant for August 2008–July 2010. The results of this study show that the production activity with the lowest cost on the biodiesel production possibility frontier occurred in March 2010 (production activity used 1.41 kL of waste cooking oil, 0.18 kL of MeOH, 16.33 kg of KOH, and 5.45 kW h of power), and the unit production cost in that month was 18,517 yen/kL. Comparing this efficient production cost to the mean unit production cost on the production possibility frontier at 19,712 yen/kL, revealed that the cost of producing 1 kL of biodiesel could be reduced by as much as 1195 yen. We also find that the efficiency improvement will contribute to decreasing the cost ratio (cost per sale) of the biodiesel production by approximately 1% during the study period (24 months) between August 2008 and July 2010. - Highlights: ► This paper analyzes the productive efficiency of an advanced biodiesel plant using DEA. ► We examine the optimal production activities of biodiesel from waste cooking oil. ► Considering the production frontier, the unit cost of biodiesel could be reduced by 1195 yen. ► The efficiency improvement contributes to decreasing the cost ratio of the biodiesel by 1%

Internalizing environmental costs: A survey of progress in estimating the external environmental costs of electricity production and a review of market-based policies to incorporate them

International Nuclear Information System (INIS)

Eto, J.H.; Helcke, G.

1991-01-01

The production of electricity creates environmental insults whose costs are not fully reflected in the prices paid by consumers for electricity services. Failure to incorporate these external costs leads to economically inefficient production and consumption decisions. The present work reviews two related efforts to address this market distortion. The first concerns progress in estimating the uninternalized environmental costs of electricity production. The second concerns market-based approaches to internalizing these costs in electricity production and consumption decisions. 10 tabs.; 41 refs

Does the Lowest Bid Price Evaluation Criterion Make for a More Efficient Public Procurement Selection Criterion? (Case of the Czech Republic

Directory of Open Access Journals (Sweden)

Ochrana František

2015-06-01

Full Text Available Through the institute of public procurement a considerable volume of financial resources is allocated. It is therefore in the interest of contracting entities to seek ways of how to achieve an efficient allocation of resources. Some public contract-awarding entities, along with some public-administration authorities in the Czech Republic, believe that the use of a single evaluation criterion (the lowest bid price results in a more efficient tender for a public contract. It was found that contracting entities in the Czech Republic strongly prefer to use the lowest bid price criterion. Within the examined sample, 86.5 % of public procurements were evaluated this way. The analysis of the examined sample of public contracts proved that the choice of an evaluation criterion, even the preference of the lowest bid price criterion, does not have any obvious impact on the final cost of a public contract. The study concludes that it is inappropriate to prefer the criterion of the lowest bid price within the evaluation of public contracts that are characterised by their complexity (including public contracts for construction works and public service contracts. The findings of the Supreme Audit Office related to the inspection of public contracts indicate that when using the lowest bid price as an evaluation criterion, a public contract may indeed be tendered with the lowest bid price, but not necessarily the best offer in terms of supplied quality. It is therefore not appropriate to use the lowest bid price evaluation criterion to such an extent for the purpose of evaluating work and services. Any improvement to this situation requires a corresponding amendment to the Law on Public Contracts and mainly a radical change in the attitude of the Office for the Protection of Competition towards proposed changes, as indicated within the conclusions and recommendations proposed by this study.

Expansion formulae for characteristics of cumulative cost in finite horizon production models

NARCIS (Netherlands)

Ayhan, H.; Schlegel, S.

2001-01-01

We consider the expected value and the tail probability of cumulative shortage and holding cost (i.e. the probability that cumulative cost is more than a certain value) in finite horizon production models. An exact expression is provided for the expected value of the cumulative cost for general

Estimating generation costs for wind power production in France

International Nuclear Information System (INIS)

Benazet, J.F.; Probert, E.J.

1997-01-01

Wind power is being exploited in several European countries as one of a possible number of sources of renewable energy. However, in France there is a heavy reliance on nuclear and hydro-electric power and the potential of wind power as part of the energy mix has been virtually ignored. One of the reasons advanced for the under utilisation of this technology is that it is financially unattractive. In this paper the contribution which wind power could potentially make to overall power production levels in France is examined. A cost estimate model is developed which derives electricity generation costs and determines realistic levels of production for the future. The model automatically determines the associated number of wind turbines required and the geographical areas in which they should be located. (author)

Using a Web-Based System to Estimate the Cost of Online Course Production

Science.gov (United States)

Gordon, Stuart; He, Wu; Abdous, M'hammed

2009-01-01

The increasing demand for online courses requires efficient and low cost production. Since the decision to develop online courses is often affected by financial factors, it is becoming increasingly important to determine, upfront, the cost of online course production. Many of the programs and educators interested in developing online courses…

A Comparison of Carbon Footprint and Production Cost of Different Pasta Products Based on Whole Egg and Pea Flour

Directory of Open Access Journals (Sweden)

Antonia Nette

2016-03-01

Full Text Available Feed and food production are inter alia reasons for high greenhouse gas emissions. Greenhouse gas emissions could be reduced by the replacement of animal components with plant components in processed food products, such as pasta. The main components currently used for pasta are semolina, and water, as well as additional egg. The hypothesis of this paper is that the substitution of whole egg with plant-based ingredients, for example from peas, in such a product might lead to reduced greenhouse gas emissions (GHG and thus a reduced carbon footprint at economically reasonable costs. The costs and carbon footprints of two pasta types, produced with egg or pea protein, are calculated. Plant protein–based pasta products proved to cause 0.57 kg CO2 equivalents (CO2eq (31% per kg pasta less greenhouse gas emissions than animal-based pasta, while the cost of production increases by 10% to 3.00 €/kg pasta.

A Comparison of Carbon Footprint and Production Cost of Different Pasta Products Based on Whole Egg and Pea Flour

Science.gov (United States)

Nette, Antonia; Wolf, Patricia; Schlüter, Oliver; Meyer-Aurich, Andreas

2016-01-01

Feed and food production are inter alia reasons for high greenhouse gas emissions. Greenhouse gas emissions could be reduced by the replacement of animal components with plant components in processed food products, such as pasta. The main components currently used for pasta are semolina, and water, as well as additional egg. The hypothesis of this paper is that the substitution of whole egg with plant-based ingredients, for example from peas, in such a product might lead to reduced greenhouse gas emissions (GHG) and thus a reduced carbon footprint at economically reasonable costs. The costs and carbon footprints of two pasta types, produced with egg or pea protein, are calculated. Plant protein–based pasta products proved to cause 0.57 kg CO2 equivalents (CO2eq) (31%) per kg pasta less greenhouse gas emissions than animal-based pasta, while the cost of production increases by 10% to 3.00 €/kg pasta. PMID:28231112

Economic impact of hand and wrist injuries: Health-care costs and productivity costs in a population-based study

NARCIS (Netherlands)

C.E. de Putter (Dennis); R.W. Selles (Ruud); S. Polinder (Suzanne); M.J.M. Panneman (Martien); S.E.R. Hovius (Steven); E.F. van Beeck (Ed)

2012-01-01

textabstractBackground: Injuries to the hand and wrist account for approximately 20% of patient visits to emergency departments and may impose a large economic burden. The purpose of this study was to estimate the total health-care costs and productivity costs of injuries to the hand and wrist and

Custo e análise de sensibilidade na produção de silagem = Cost and sensitivity analysis in the production of silage

Directory of Open Access Journals (Sweden)

Glauber dos Santos

2017-01-01

miscellaneous expenses. The total production cost of corn silage in the 15/16 year crop was R$ 317.30 per ton of dry matter or R$ 104.71 per ton of green matter. The inputs (seeds, fertilizers and pesticides were the most representative items in the cost, followed by harvesting and silage, planting and cultivation, and soil preparation. The sensitivity analysis shows that the cost is 1.92 times more considering different productivity values and percentages of loss, being the lowest cost R$ 81.57 and the highest R$ 157.32.

No apparent costs for facultative antibiotic production by the soil bacterium Pseudomonas fluorescens Pf0-1.

Science.gov (United States)

Garbeva, Paolina; Tyc, Olaf; Remus-Emsermann, Mitja N P; van der Wal, Annemieke; Vos, Michiel; Silby, Mark; de Boer, Wietse

2011-01-01

Many soil-inhabiting bacteria are known to produce secondary metabolites that can suppress microorganisms competing for the same resources. The production of antimicrobial compounds is expected to incur fitness costs for the producing bacteria. Such costs form the basis for models on the co-existence of antibiotic-producing and non-antibiotic producing strains. However, so far studies quantifying the costs of antibiotic production by bacteria are scarce. The current study reports on possible costs, for antibiotic production by Pseudomonas fluorescens Pf0-1, a soil bacterium that is induced to produce a broad-spectrum antibiotic when it is confronted with non-related bacterial competitors or supernatants of their cultures. We measured the possible cost of antibiotic production for Pseudomonas fluorescens Pf0-1 by monitoring changes in growth rate with and without induction of antibiotic production by supernatant of a bacterial competitor, namely Pedobacter sp.. Experiments were performed in liquid as well as on semi-solid media under nutrient-limited conditions that are expected to most clearly reveal fitness costs. Our results did not reveal any significant costs for production of antibiotics by Pseudomonas fluorescens Pf0-1. Comparison of growth rates of the antibiotic-producing wild-type cells with those of non-antibiotic producing mutants did not reveal costs of antibiotic production either. Based on our findings we propose that the facultative production of antibiotics might not be selected to mitigate metabolic costs, but instead might be advantageous because it limits the risk of competitors evolving resistance, or even the risk of competitors feeding on the compounds produced.

Energy balance and cost analysis for raisin production in Aegean Region in Turkey

Directory of Open Access Journals (Sweden)

Uysal Hülya

2016-01-01

Full Text Available The aim of this study is to determine energy consumption of input and output used in raisin production and making a cost analysis in Aegean Region. Energy output-input analysis is generally done to determine the scope of environment and energy efficiency of agricultural production. In this study the cost of raisin production was calculated by Manisa Viticulture Research Institute's records in 2015. Costs of inputs and prices of raisin were obtained from various sources such as Turkish Statistical Institute, Aegean Exporters' Association and Turkish Ministry of Food, Agriculture and Livestock. The total energy input necessity for raisin production was 39,066.91 MJ/ha. The research results indicated that the total energy input used for raisin was mainly dependent on non-renewable energy forms (%97. The high ratio of non-renewable energy in the total used energy inputs causes negative effects on the sustainability in agricultural production. Among input energy sources, diesel oil, chemical fertilizers and electricity contained highest energy shares with 34.30%, 26.96%, and 22.50% respectively. The energy ratio and energy productivity were found to be 6.04 and 0.51 kg/MJ. Gross production value and total variable costs for raisin were $ 8,600 and $ 4,528.25, respectively. As a result of cost analysis, gross margin was calculated as $ 4,071.75.

Metabolic engineering of Cyanobacteria and microalgae for enhanced production of biofuels and high-value products.

Science.gov (United States)

Gomaa, M A; Al-Haj, L; Abed, R M M

2016-10-01

A lot of research has been performed on Cyanobacteria and microalgae with the aim to produce numerous biotechnological products. However, native strains have a few shortcomings, like limitations in cultivation, harvesting and product extraction, which prevents reaching optimal production value at lowest costs. Such limitations require the intervention of genetic engineering to produce strains with superior properties. Promising advancements in the cultivation of Cyanobacteria and microalgae have been achieved by improving photosynthetic efficiency through increasing RuBisCO activity and truncation of light-harvesting antennae. Genetic engineering has also contributed to final product extraction by inducing autolysis and product secretory systems, to enable direct product recovery without going through costly extraction steps. In this review, we summarize the different enzymes and pathways that have been targeted thus far for improving cultivation aspects, harvesting and product extraction in Cyanobacteria and microalgae. With synthetic biology advancements, genetically engineered strains can be generated to resolve demanding process issues and achieve economic practicality. This comprehensive overview of gene modifications will be useful to researchers in the field to employ on their strains to increase their yields and improve the economic feasibility of the production process. © 2016 The Society for Applied Microbiology.

Cheese whey: A cost-effective alternative for hyaluronic acid production by Streptococcus zooepidemicus.

Science.gov (United States)

Amado, Isabel R; Vázquez, José A; Pastrana, Lorenzo; Teixeira, José A

2016-05-01

This study focuses on the optimisation of cheese whey formulated media for the production of hyaluronic acid (HA) by Streptococcus zooepidemicus. Culture media containing whey (W; 2.1g/L) or whey hydrolysate (WH; 2.4 g/L) gave the highest HA productions. Both W and WH produced high yields on protein consumed, suggesting cheese whey is a good nitrogen source for S. zooepidemicus production of HA. Polysaccharide concentrations of 4.0 g/L and 3.2g/L were produced in W and WH in a further scale-up to 5L bioreactors, confirming the suitability of the low-cost nitrogen source. Cheese whey culture media provided high molecular weight (>3000 kDa) HA products. This study revealed replacing the commercial peptone by the low-cost alternative could reduce HA production costs by up to a 70% compared to synthetic media. Copyright © 2015 Elsevier Ltd. All rights reserved.

Global Approximations to Cost and Production Functions using Artificial Neural Networks

Directory of Open Access Journals (Sweden)

Efthymios G. Tsionas

2009-06-01

Full Text Available The estimation of cost and production functions in economics relies on standard specifications which are less than satisfactory in numerous situations. However, instead of fitting the data with a pre-specified model, Artificial Neural Networks (ANNs let the data itself serve as evidence to support the modelrs estimation of the underlying process. In this context, the proposed approach combines the strengths of economics, statistics and machine learning research and the paper proposes a global approximation to arbitrary cost and production functions, respectively, given by ANNs. Suggestions on implementation are proposed and empirical application relies on standard techniques. All relevant measures such as Returns to Scale (RTS and Total Factor Productivity (TFP may be computed routinely.

Costs and Returns of Yam/Maize Production in Bosso Local ...

African Journals Online (AJOL)

In Nigeria, yam is the most important stable food crop while maize is the third most important cereal crop. However, small scale farmers do not always realize appreciable net returns from their combined production. Therefore, this study examined the costs and returns of yam/maize (mixed cropping) production in Bosso ...

Synthetic fuel production costs by means of solid oxide electrolysis cells

DEFF Research Database (Denmark)

Ridjan, Iva; Mathiesen, Brian Vad; Connolly, David

2014-01-01

The purpose of this paper is to provide an overview of fuel production costs for two types of synthetic fuels – methanol and methane, along with comparable costs for first and second generation biodiesel, two types of second generation bioethanol, and biogas. When analysing 100% renewable systems...

Alternative wind power modeling methods using chronological and load duration curve production cost models

Energy Technology Data Exchange (ETDEWEB)

Milligan, M R

1996-04-01

As an intermittent resource, capturing the temporal variation in windpower is an important issue in the context of utility production cost modeling. Many of the production cost models use a method that creates a cumulative probability distribution that is outside the time domain. The purpose of this report is to examine two production cost models that represent the two major model types: chronological and load duration cure models. This report is part of the ongoing research undertaken by the Wind Technology Division of the National Renewable Energy Laboratory in utility modeling and wind system integration.

Planning and production of a low cost cryostat for electrical characterization of materials

International Nuclear Information System (INIS)

Torsoni, G.B.; Carvalho, C.L.; Brito, G.A.

2010-01-01

The system BSCCO can show three main Bi 2 Sr 2 CuO, Bi 2 Sr 2 CaCu 2 O and Bi 2 Sr 2 Ca 2 Cu 3 O with critical temperatures around 20 K, 80 K and 110 K, respectively. Therefore, it is fundamental to study these materials in details at lowest temperatures, with simple systems and low cost equipment. In this work was projected a cryogenic system with capacity to reach temperatures below the liquid nitrogen temperature (77 K). Based on thermodynamic principles, which is used with liquid nitrogen system, with the vacuum application and control, it has been achieved temperatures about 63 K (freezing nitrogen temperature) in the sample holder. With the availability of a large range temperature becomes possible to identify at least two superconducting phases as in system BSCCO, which also involves a cost/benefit ratio more favorable, avoiding the use of more expensive refrigerates as liquid helium. (author)

External costs of cadmium emissions to soil: a drawback of phosphorus fertilizers

DEFF Research Database (Denmark)

Pizzol, Massimo; C.R. Smart, James; Thomsen, Marianne

2014-01-01

are exposed to cadmium through their diet causing potential adverse health impacts. Future scenarios for cadmium emissions to soil via agricultural applications of inorganic and organic fertilizers in Denmark were defined. A simplified fate and speciation model allowed the increase in soil cadmium......Abstract: In this study the Impact-Pathway Approach methodology was applied for monetary valuation of health impacts due to cadmium emitted to soil as a micro-pollutant present in phosphorus fertilizers. Due to the high persistency of cadmium in soil, and high soil-to-plant transfer rates, humans...... ammonium phosphate) and mineral fertilizer produced the lowest external health costs, followed by the fertilizer products wastewater sludge and pig manure. The external cost estimates produced in this study could be used to design economic policy instruments to encourage use of cleaner fertilizer products....

(Super Variable Costing-Throughput Costing)

OpenAIRE

Çakıcı, Cemal

2006-01-01

(Super Variable Costing-Throughput Costing) The aim of this study is to explain the super-variable costing method which is a new subject in cost and management accounting and to show it’s working practicly.Shortly, super-variable costing can be defined as a costing method which is use only direct material costs in calculate of product costs and treats all costs except these (direct labor and overhead) as periad costs or operating costs.By using super-variable costing method, product costs ar...

Cost and Return Analysis of Ginger Production in the Guinea ...

African Journals Online (AJOL)

The study focuses on the cost and return analysis of ginger production in the guinea savannah agro ecology of Nigeria. The study is aimed at highlighting the profitability of ginger production with a view to informing and influencing farmers and relevant stakeholders. The study was conducted at Kajuru, Kaduna state in the ...

The Cost Structure - Key Element in the Development of Product Policy

Directory of Open Access Journals (Sweden)

Daniel Jiroveanu

2016-01-01

In this regard, planning the launch of new products or services requires a strategic approach, astructural analysis of the costs and the identification of opportunities to increase optimization withthe aim of increasing the effectiveness of the product policy.

Calzos pentagonales cementados: influencia de la velocidad de corte en la productividad y los costos//Cemented pentagonal inserts: influence of cutting speed on productivity and costs

Directory of Open Access Journals (Sweden)

David Machín-Valle

2013-09-01

Full Text Available Las herramientas de corte con sujeción mecánica (calzos o insertos son utilizadas en procesos de mecanizado de alta productividad. El objetivo del trabajo consiste en determinar la influencia de la velocidad de corte del proceso de torneado en la productividad y los costos. En el estudio se emplearon calzos pentagonales de carburo cementado de producción nacional. Como material a elaborar fueutilizado el acero Cr12Mo, utilizándose varias velocidades de corte, manteniéndose constante el avance y la profundidad, hasta alcanzar el desgaste límite del flanco del calzo (0,5 mm para obtener la ecuación que relaciona la velocidad de corte y el tiempo de vida útil del calzo. También fue establecida la influencia de la velocidad de corte sobre los tiempos de maquinado y los costos productivos respectivamente. Por último, la velocidad de corte obtenida para máxima productividad es 255.45 m/min y para el menor costo 120,03 m/min.Palabras claves: torneado, calzos pentagonales, productividad, velocidad de corte.______________________________________________________________________________AbstractCutting tools with mechanical clamping (inserts are used in high productivity machining processes. The objective of the study was to determine the influence of turning process cutting speed on productivity and costs. Cuban pentagonal cemented carbide inserts were used. The turning of Cr12Mo was performed atvarious cutting speeds and remained constant feed and depth. The insert´s flank wear behavior and the equation that relates the cutting speed and the insert life were determined. The influence of the cutting speed on machining time and production costs respectively was established too. It was determined thatthe cutting speed for maximum productivity is 255.45 m / min and for the lowest cost is 120.03 m / min.Key words: turning, pentagonal inserts, productivity, cutting speed.

Cost and risk tradeoff for routing nuclear spent fuel movements

International Nuclear Information System (INIS)

Chin, S.M.

1988-01-01

In the transportation industry, much effort has been devoted to finding the least cost routes for shipping goods from their production sites to the market areas. In addition to cost, the decision maker must take the risk of an incident into consideration for transportation routing involving hazardous materials. The transportation of spent nuclear fuel from reactor sites to repositories is an example. Given suitable network information, existing routing methods can readily determine least cost or least risk routes for any shipment. These two solutions, however, represent the extremes of a large number of alternatives with different combinations of risk and cost. In the selection of routes and also in the evaluation of alternative storage sites it is not enough to know which is the lease cost or lowest risk. Intelligent decision-marking requires knowledge of how much it will cost to lower risk by a certain amount. The objective of this study is to develop an automated system to evaluate the tradeoff between transportation cost and potential population at risk under different nuclear spent fuel transportation strategies

No apparent costs for facultative antibiotic production by the soil bacterium Pseudomonas fluorescens Pf0-1.

Directory of Open Access Journals (Sweden)

Paolina Garbeva

Full Text Available BACKGROUND: Many soil-inhabiting bacteria are known to produce secondary metabolites that can suppress microorganisms competing for the same resources. The production of antimicrobial compounds is expected to incur fitness costs for the producing bacteria. Such costs form the basis for models on the co-existence of antibiotic-producing and non-antibiotic producing strains. However, so far studies quantifying the costs of antibiotic production by bacteria are scarce. The current study reports on possible costs, for antibiotic production by Pseudomonas fluorescens Pf0-1, a soil bacterium that is induced to produce a broad-spectrum antibiotic when it is confronted with non-related bacterial competitors or supernatants of their cultures. METHODOLOGY AND PRINCIPAL FINDINGS: We measured the possible cost of antibiotic production for Pseudomonas fluorescens Pf0-1 by monitoring changes in growth rate with and without induction of antibiotic production by supernatant of a bacterial competitor, namely Pedobacter sp.. Experiments were performed in liquid as well as on semi-solid media under nutrient-limited conditions that are expected to most clearly reveal fitness costs. Our results did not reveal any significant costs for production of antibiotics by Pseudomonas fluorescens Pf0-1. Comparison of growth rates of the antibiotic-producing wild-type cells with those of non-antibiotic producing mutants did not reveal costs of antibiotic production either. SIGNIFICANCE: Based on our findings we propose that the facultative production of antibiotics might not be selected to mitigate metabolic costs, but instead might be advantageous because it limits the risk of competitors evolving resistance, or even the risk of competitors feeding on the compounds produced.

Guidelines for target costing adoption in the development of products for the residential real estate market

Directory of Open Access Journals (Sweden)

Reymard Savio Sampaio de Melo

Full Text Available Abstract This study focuses on the problems associated with the traditional practice of reducing costs in construction and the need to increase business competitiveness in the residential real estate sector. In this context, target costing is a promising approach to improve the competitiveness of companies by ensuring that the products launched on the market do not jeopardize the company's results and value delivery to customers. However, far too little attention is paid to target costing implementation by companies that develop residential real state products for sale and face strong market competition. Thus, this paper seeks to investigate whether the standard framework of target costing in the literature applies - with or without adjustments - to real estate developers. Case study was the research strategy adopted. Guidelines are proposed for the introduction of target costing in the development process of residential real estate products. The proposed guidelines are related to the three main sections of the target costing process: market-driven costing, product-level target costing and component-level target costing.

Y-12 product improvements expected to reduce metal production costs and decrease fabrication losses

International Nuclear Information System (INIS)

Hassler, Morris E.

2005-01-01

The Y-12 National Security Complex (Y-12) supplies uranium metal and uranium oxide feed material for fabrication into fuel for research reactors around the world. Over the past few years, Y-12 has continued to improve its Low Enriched Uranium (LEU) product. The LEU is produced by taking U.S. surplus Highly Enriched Uranium (HEU) and blending it with depleted or natural uranium. The surplus HEU comes from dismantled U.S. weapons parts. Those research reactors that use LEU from Y-12 are making important contributions to international nuclear nonproliferation by using LEU rather than HEU, and helping to disposition former U.S. weapons material. It is clearly understood that the research reactor community must keep fuel costs as low as possible and Y-12 is making every effort to improve efficiencies in producing the uranium through standardizing the chemical specifications as well as the product mass and dimensional qualities. These production cost reductions allows for the U.S. to keep the LEU product price low even with the dramatic increase in the uranium enrichment and feed component market prices in the last few years. This paper will discuss a new standard specification that has been proposed to existing LEU metal customers and fuel fabricators. It will also cover Y-12's progress on a new mold-design that will result in a more uniform, higher quality product and eliminates two steps of the production process. This new product is expected to decrease fabrication losses by 5-10%, depending on the fabricator's process. The paper will include planned activities and the schedule associated with implementation of the new specification and product form. (author)

Impact of air pollution control costs on the cost and spatial arrangement of cellulosic biofuel production in the U.S.

Science.gov (United States)

Murphy, Colin W; Parker, Nathan C

2014-02-18

Air pollution emissions regulation can affect the location, size, and technology choice of potential biofuel production facilities. Difficulty in obtaining air pollutant emission permits and the cost of air pollution control devices have been cited by some fuel producers as barriers to development. This paper expands on the Geospatial Bioenergy Systems Model (GBSM) to evaluate the effect of air pollution control costs on the availability, cost, and distribution of U.S. biofuel production by subjecting potential facility locations within U.S. Clean Air Act nonattainment areas, which exceed thresholds for healthy air quality, to additional costs. This paper compares three scenarios: one with air quality costs included, one without air quality costs, and one in which conversion facilities were prohibited in Clean Air Act nonattainment areas. While air quality regulation may substantially affect local decisions regarding siting or technology choices, their effect on the system as a whole is small. Most biofuel facilities are expected to be sited near to feedstock supplies, which are seldom in nonattainment areas. The average cost per unit of produced energy is less than 1% higher in the scenarios with air quality compliance costs than in scenarios without such costs. When facility construction is prohibited in nonattainment areas, the costs increase by slightly over 1%, due to increases in the distance feedstock is transported to facilities in attainment areas.

Concepts of increasing productivity and reducing the processing cost of machine parts

Directory of Open Access Journals (Sweden)

О. С. Кленов

2017-06-01

Full Text Available The basic conditions to reduce the cost of processing technology and improve productivity through the use of modern cutting tools produced by leading foreign firms producing tools have been appraised from theory in the work. Theoretically, it has been found that an increase in the cost of processing varies according to extremum dependence, passing the minimum point. It is possible to reduce the minimum processing cost due to the increase of productivity using cutting edge tools, characterized by a high capacity for work in high cutting temperatures. The criterion showing the technological price cost minimum is the ratio of the expenditures on workers’ wages to the expenditures on the cutting tools, it being quite specific for various processing conditions. To analyze the possibilities of practical use of the proposed criterion, a complex of experimental researches of the technological prime cost and productivity of the processing with hard alloy cutting tools with wear-resistant coatings produced by the company «Iscar» has been carried out. It has been established that their use makes it possible by more than one half to reduce the labour consumption and overall costs as compared to the hard alloy cutting tools traditionally used in home industry. It has been shown that this effect is achieved by increasing the cutting speed and feed due to increased wear resistance and heat resistance of the «Iscar» company tools. It was established that it is much more possible to achieve low processing cost at milling than at turning. It was stated with regard to all major expenditures including the workers' wages, the cost of the cutting tools, equipment and other costs, allowing more correctly estimate the cost-effectiveness of mechanical processing. Experiments confirmed that the main condition for reducing the processing cost to its minimum value is to increase the processing performance through the use of a heat-resistant and wear-resistant cutting

An estimate of the cost of electricity production from hot-dry rock

International Nuclear Information System (INIS)

Pierce, K.G.; Livesay, B.J.

1993-01-01

This paper gives an estimate of the cost to produce electricity from hot-dry rock (HDR). Employment of the energy in HDR for the production of electricity requires drilling multiple wells from the surface to the hot rock, connecting the wells through hydraulic fracturing, and then circulating water through the fracture system to extract heat from the rock. The basic HDR system modeled in this paper consists of an injection well, two production wells, the fracture system (or HDR reservoir), and a binary power plant. Water is pumped into the reservoir through the injection well where it is heated and then recovered through the production wells. Upon recovery, the hot water is pumped through a heat exchanger transferring heat to the binary, or working, fluid in the power plant. The power plant is a net 5.1-MW e binary plant employing dry cooling. Make-up water is supplied by a local well. In this paper, the cost of producing electricity with the basic system is estimated as the sum of the costs of the individual parts. The effects on cost of variations to certain assumptions, as well as the sensitivity of costs to different aspects of the basic system, are also investigated

Levelized Cost of Energy Analysis of a Wind Power Generation System at Búrfell in Iceland

Directory of Open Access Journals (Sweden)

Birgir Freyr Ragnarsson

2015-09-01

Full Text Available Wind energy harnessing is a new energy production alternative in Iceland. Current installed wind power in Iceland sums to 1.8 MW, which in contrast is 0.1% of the country’s total electricity production. This article is dedicated to the exploration of the potential cost of wind energy production at Búrfell in the south of Iceland. A levelized cost of energy (LCOE approach was applied to the estimation of the potential cost. Weibull simulation is used to simulate wind data for calculations. A confirmation of the power law is done by comparing real data to calculated values. A modified Weibull simulation is verified by comparing results with actual on-site test wind turbines. A wind farm of 99MWis suggested for the site. Key results were the capacity factor (CF at Búrfell being 38.15% on average and that the LCOE for wind energy was estimated as 0.087–0.088 USD/kWh (assuming 10% weighted average cost of capital (WACC, which classifies Búrfell among the lowest LCOE sites for wind energy in Europe.

Considerations Concerning the Application of Target Costing Method in the Industry of Dairy Products

Directory of Open Access Journals (Sweden)

Mortură Laura Alexandra

2017-01-01

Full Text Available In the present conditions of the market economy, which is in full process of globalization, theadaptation of the more complex and diverse needs of the final consumers, leads to a permanentcreation and development of new products and services by the entities in order to satisfy theseneeds. Thus, the entities must apply efficient and tested methods for determining and provisioningthe costs which will result from launching new products on the market, methods which wouldsupport and ensure the best quality – price report, and which are to reduce the production costs upto a level of not affecting the quality of the final product. Such a method, according to specialtyliterature is the modern method of Target Costing.

26 CFR 1.181-1T - Deduction for qualified film and television production costs (temporary).

Science.gov (United States)

2010-04-01

... incurred to distribute or exploit a production (including advertising and print costs). (iii) Production costs do not include the costs to prepare a new release or new broadcast of an existing film or video after the initial release or initial broadcast of the film or video (for instance, the preparation of a...

Social costs of loss in productivity-related absenteeism in Poland.

Science.gov (United States)

Genowska, Agnieszka; Fryc, Justyna; Pinkas, Jarosław; Jamiołkowski, Jacek; Szafraniec, Krystyna; Szpak, Andrzej; Bojar, Iwona

2017-10-06

The aim of this study was to estimate indirect costs associated with losses in productivity due to sickness absence among registered workers in Poland. Data on sick leave durations in 2013 was obtained from the Social Insurance Institution (SII) (Zakład Ubezpieczeń Społecznych - ZUS). Based on the number of assumptions, this data was used for calculating absence durations. The costs of lost productivity were estimated on the basis of the measure of gross value added. Estimated losses in productivity due to absenteeism in 2013 together accounted for 4.33% of gross domestic product (GDP) (17.09 billion euro). In the female population, the total value of losses amounted to 9.66 billion euro, but excluding the costs of pregnancy, childbirth, and puerperium (2.96 billion euro), it was 6.7 billion euro. In the male population, the loss amounted to 7.43 billion euro. The highest overall costs of sickness absence based on age were found in the age group of 30-39 years (5.14 billion euro, including pregnancy, childbirth, and puerperium - 1.474 billion euro; respiratory diseases - 0.632 billion euro, injuries and poisonings - 0.62 billion euro). In the group of people aged > 40 years, the highest cost was generated by bone-muscular diseases (1.553 billion euro) and injuries and poisoning (1.251 billion euro). Higher losses in the productivity of women in addition to pregnancy, childbirth, and puerperium were due to mental and behavioral disorders (0.71 billion euro), diseases of the genitourinary system (0.38 billion euro), and neoplasms (0.35 billion euro). At the same time, in men, compared to women, we observed higher losses due to injuries and poisoning (1.65 billion euro), and diseases of musculoskeletal (1.26 billion euro), nervous (0.79 billion euro), circulatory (0.65 billion euro), and digestive (0.41 billion euro) systems. Improvement and further development of effective strategies for prevention of complications of pregnancy and chronic diseases in the

The effect of CO2 regulations on the cost of corn ethanol production

Science.gov (United States)

Plevin, R. J.; Mueller, S.

2008-04-01

To explore the effect of CO2 price on the effective cost of ethanol production we have developed a model that integrates financial and emissions accounting for dry-mill corn ethanol plants. Three policy options are modeled: (1) a charge per unit of life cycle CO2 emissions, (2) a charge per unit of direct biorefinery emissions only, and (3) a low carbon fuel standard (LCFS). A CO2 charge on life cycle emissions increases production costs by between 0.005 and 0.008 l-1 per 10 Mg-1 CO2 price increment, across all modeled plant energy systems, with increases under direct emissions somewhat lower in all cases. In contrast, a LCFS increases the cost of production for selected plant energy systems only: a LCFS requiring reductions in average fuel global warming intensity (GWI) with a target of 10% below the 2005 baseline increases the production costs for coal-fired plants only. For all other plant types, the LCFS operates as a subsidy. The findings depend strongly on the magnitude of a land use change adder. Some land use change adders currently discussed in the literature will push the GWI of all modeled production systems above the LCFS target, flipping the CO2 price from a subsidy to a tax.

Utilization and cost of log production from animal loging operations

Science.gov (United States)

Suraj P. Shrestha; Bobby L. Lanford; Robert B. Rummer; Mark Dubois

2006-01-01

Forest harvesting with animals is a labor-intensive operation. It is expensive to use machines on smaller woodlots, which require frequent moves if mechanically logged. So, small logging systems using animals may be more cost effective. In this study, work sampling was used for five animal logging operations in Alabama to measure productive and non-productive time...

How costly are carbon offsets : a meta-analysis of forest carbon sinks

International Nuclear Information System (INIS)

Van Kooten, G.C.; Eagle, A.J.; Manley, J.; Smolak, T.M.

2004-01-01

Carbon terrestrial sinks are one of the many proposed mitigation responses to climate change. Carbon sinks are considered to be a low-cost alternative to fuel switching and reduced fossil fuel consumption for reducing atmospheric carbon dioxide emissions. This study examined the costs of sequestering carbon in terrestrial ecosystems via forestry activities. A meta-regression analysis was used to determine which factors influence the costs of carbon sequestration via forest activities. Important concerns about how the Kyoto Protocol may be implemented were also addressed. The meta-regression analysis was used to examine 981 estimates from 55 studies on the cost of creating carbon offsets using forestry. Baseline cost estimates are US$46.62 to 260.29 per tC. Tree planting and agroforestry increases costs by more than 200 per cent. Costs are lowest when post-harvest storage of carbon in wood products is considered, or when biomass is substituted for fossil fuels in energy production. The meta-analysis also considered land use, land-use change and forestry (LULUCF) policies that increase the carbon sink functions of terrestrial ecosystems. The main motive for using sinks in the accounting process is that they avoid the use of expensive controls for the emission of carbon dioxide and other greenhouse gases. refs., tabs

Multi objective optimization model for minimizing production cost and environmental impact in CNC turning process

Science.gov (United States)

Widhiarso, Wahyu; Rosyidi, Cucuk Nur

2018-02-01

Minimizing production cost in a manufacturing company will increase the profit of the company. The cutting parameters will affect total processing time which then will affect the production cost of machining process. Besides affecting the production cost and processing time, the cutting parameters will also affect the environment. An optimization model is needed to determine the optimum cutting parameters. In this paper, we develop an optimization model to minimize the production cost and the environmental impact in CNC turning process. The model is used a multi objective optimization. Cutting speed and feed rate are served as the decision variables. Constraints considered are cutting speed, feed rate, cutting force, output power, and surface roughness. The environmental impact is converted from the environmental burden by using eco-indicator 99. Numerical example is given to show the implementation of the model and solved using OptQuest of Oracle Crystal Ball software. The results of optimization indicate that the model can be used to optimize the cutting parameters to minimize the production cost and the environmental impact.

Analyzing Integrated Cost-Schedule Risk for Complex Product Systems R&D Projects

Directory of Open Access Journals (Sweden)

Zhe Xu

2014-01-01

Full Text Available The vast majority of the research efforts in project risk management tend to assess cost risk and schedule risk independently. However, project cost and time are related in reality and the relationship between them should be analyzed directly. We propose an integrated cost and schedule risk assessment model for complex product systems R&D projects. Graphical evaluation review technique (GERT, Monte Carlo simulation, and probability distribution theory are utilized to establish the model. In addition, statistical analysis and regression analysis techniques are employed to analyze simulation outputs. Finally, a complex product systems R&D project as an example is modeled by the proposed approach and the simulation outputs are analyzed to illustrate the effectiveness of the risk assessment model. It seems that integrating cost and schedule risk assessment can provide more reliable risk estimation results.

Firm Productivity and Infrastructure Costs in East Africa

OpenAIRE

Iimi, Atsushi; Humphrey, Richard Martin; Melibaeva, Sevara

2015-01-01

Infrastructure is an important driving force for economic growth. It reduces trade and transaction costs and stimulates the productivity of the economy. Africa has been lagging behind in the global manufacturing market. Among others, infrastructure is an important constraint in many African countries. Using firm-level data for East Africa, the paper reexamines the relationship between firm ...

Reducing electrocoagulation harvesting costs for practical microalgal biodiesel production.

Science.gov (United States)

Dassey, Adam J; Theegala, Chandra S

2014-01-01

Electrocoagulation has shown potential to be a primary microalgae harvesting technique for biodiesel production. However, methods to reduce energy and electrode costs are still necessary for practical application. Electrocoagulation tests were conducted on Nannochloris sp. and Dunaliella sp. using perforated aluminium and iron electrodes under various charge densities. Aluminium electrodes were shown to be more efficient than iron electrodes when harvesting both algal species. Despite the lower harvesting efficiency, however, the iron electrodes were more energy and cost efficient. Operational costs of less than $0.03/L oil were achieved when harvesting Nannochloris sp. with iron electrodes at 35% harvest efficiency, whereas aluminium electrodes cost $0.75/L oil with 42% harvesting efficiency. Increasing the harvesting efficiencies for both aluminium and iron electrodes also increased the overall cost per litre of oil, therefore lower harvesting efficiencies with lower energy inputs was recommended. Also, increasing the culturing salinity to 2 ppt sodium chloride for freshwater Nannochloris sp. was determined practical to improve the electrocoagulation energy efficiency despite a 25% reduction in cell growth.

Optimal replacement policy of products with repair-cost threshold after the extended warranty

Institute of Scientific and Technical Information of China (English)

Lijun Shang; Zhiqiang Cai

2017-01-01

The reliability of the product sold under a warranty is usually maintained by the manufacturer during the warranty period. After the expiry of the warranty, however, the consumer confronts a problem about how to maintain the reliability of the product. This paper proposes, from the consumer's perspective, a replace-ment policy after the extended warranty, under the assumption that the product is sold under the renewable free replacement warranty (RFRW) policy in which the replacement is dependent on the repair-cost threshold. The proposed replacement policy is the replacement after the extended warranty is performed by the consumer based on the repair-cost threshold or preventive replacement (PR) age, which are decision variables. The expected cost rate model is derived from the consumer's perspective. The existence and uniqueness of the optimal solution that minimizes the expected cost rate per unit time are offered. Finally, a numeri-cal example is presented to exemplify the proposed model.

An Instructional Exercise in Cost-Raising Strategies, and Perfect Complements Production

Science.gov (United States)

Weisman, Dennis L.

2007-01-01

The author presents an account of the 1993 contract negotiations between the United Auto Workers (UAW) and Ford Motor Company to assist students in developing facility with perfect complements production and cost functions and cost-raising strategies. The author seeks an answer to why the UAW targeted Ford for contract negotiations to establish a…

Mathematical supply-chain modelling: Product analysis of cost and time

International Nuclear Information System (INIS)

Easters, D J

2014-01-01

Establishing a mathematical supply-chain model is a proposition that has received attention due to its inherent benefits of evolving global supply-chain efficiencies. This paper discusses the prevailing relationships found within apparel supply-chain environments, and contemplates the complex issues indicated for constituting a mathematical model. Principal results identified within the data suggest, that the multifarious nature of global supply-chain activities require a degree of simplification in order to fully dilate the necessary factors which affect, each sub-section of the chain. Subsequently, the research findings allowed the division of supply-chain components into sub-sections, which amassed a coherent method of product development activity. Concurrently, the supply-chain model was found to allow systematic mathematical formulae analysis, of cost and time, within the multiple contexts of each subsection encountered. The paper indicates the supply-chain model structure, the mathematics, and considers how product analysis of cost and time can improve the comprehension of product lifecycle management

Mathematical supply-chain modelling: Product analysis of cost and time

Science.gov (United States)

Easters, D. J.

2014-03-01

Establishing a mathematical supply-chain model is a proposition that has received attention due to its inherent benefits of evolving global supply-chain efficiencies. This paper discusses the prevailing relationships found within apparel supply-chain environments, and contemplates the complex issues indicated for constituting a mathematical model. Principal results identified within the data suggest, that the multifarious nature of global supply-chain activities require a degree of simplification in order to fully dilate the necessary factors which affect, each sub-section of the chain. Subsequently, the research findings allowed the division of supply-chain components into sub-sections, which amassed a coherent method of product development activity. Concurrently, the supply-chain model was found to allow systematic mathematical formulae analysis, of cost and time, within the multiple contexts of each subsection encountered. The paper indicates the supply-chain model structure, the mathematics, and considers how product analysis of cost and time can improve the comprehension of product lifecycle management.

The Effect of Safety Costs on Productivity and Quality: A Case Study of Five Steel Companies in Ahvaz

Directory of Open Access Journals (Sweden)

Gholamabbas Shirali

2016-10-01

Full Text Available Background The implementation of a safety program is one of the most effective factors in increasing productivity. A look to safety from the perspective of efficiency can indicate necessary investment in safety for all, especially the managers of companies. Objectives The aim of this study was to evaluate the effect of safety costs on some indicators of productivity and quality in industrial companies. Methods This study was a retrospective analysis and was implemented in five steel companies in Ahvaz. The data relating to the safety costs such as staffing costs and total safety costs, and productivity and quality indicators were collected in five years. This information and data were collected according to statistics from documents and archives of safety, accounting, and production sectors of companies. Costs as well as numbers and figures of variables were expressed in the form of per capita and percentage to make the data comparable. Linear and generalized regression models and Wald Chi-Square test were used by the SPSS 22 software to determine the relationships between them. Results Safety costs such as capita labor safety costs and capita total safety costs or percentage safety labor costs to labor costs, showed a significant positive effect on labor productivity, labor competitiveness, total factor productivity, quality index and production rates (in some cases, P = 0.001. Conclusions The total safety cost and safety labor compensation generally, regardless of the nature and quality of the safety management system, can impact productivity, quality and quantity of production in addition to other factors of production. Surely if safety programs are targeted and codified, the effect of the investment will be doubled.

Excitation of lowest electronic states of thymine by slow electrons

Science.gov (United States)

Chernyshova, I. V.; Kontros, E. J.; Markush, P. P.; Shpenik, O. B.

2013-11-01

Excitation of lowest electronic states of the thymine molecules in the gas phase is studied by elec- tron energy loss spectroscopy. In addition to dipole-allowed transitions to singlet states, transitions to the lowest triplet states were observed. The low-energy features of the spectrum at 3.66 and 4.61 eV are identified with the excitation of the first triplet states 13 A' (π → π*) and 13 A″ ( n → π*). The higher-lying features at 4.96, 5.75, 6.17, and 7.35 eV are assigned mainly to the excitation of the π → π* transitions to the singlet states of the molecule. The excitation dynamics of the lowest states is studied. It is found that the first triplet state 13 A'(π → π*) is most efficiently excited at a residual energy close to zero, while the singlet 21 A'(π → π*) state is excited with almost identical efficiency at different residual energies.

Reference costs of the electric power production; Couts de reference de la production electrique

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-06-01

This study periodically realized by the DGEMP aims to compare the competitiveness of the different channels of electric power production, for different utilization conditions. The first part ''reference costs of the 2003 electric power production'' examines the prices of the electric power produced by different channels in particular in the framework of the industrial implementing in 2015. The nuclear and thermal power plants are concerned. The second part is devoted to the decentralized production channels (wind energy, photovoltaic, cogeneration heat-electricity) is under construction and will be presented next year. (A.L.B.)

Blueberry Galaxies: The Lowest Mass Young Starbursts

Science.gov (United States)

Yang, Huan; Malhotra, Sangeeta; Rhoads, James E.; Wang, Junxian

2017-09-01

Searching for extreme emission line galaxies allows us to find low-mass metal-poor galaxies that are good analogs of high redshift Lyα emitting galaxies. These low-mass extreme emission line galaxies are also potential Lyman-continuum leakers. Finding them at very low redshifts (z≲ 0.05) allows us to be sensitive to even lower stellar masses and metallicities. We report on a sample of extreme emission line galaxies at z≲ 0.05 (blueberry galaxies). We selected them from SDSS broadband images on the basis of their broadband colors and studied their properties with MMT spectroscopy. From the entire SDSS DR12 photometric catalog, we found 51 photometric candidates. We spectroscopically confirm 40 as blueberry galaxies. (An additional seven candidates are contaminants, and four remain without spectra.) These blueberries are dwarf starburst galaxies with very small sizes (<1 kpc) and very high ionization ([O III]/[O II] ˜ 10-60). They also have some of the lowest stellar masses ({log}(M/{M}⊙ )˜ 6.5{--}7.5) and lowest metallicities (7.1< 12+{log}({{O}}/{{H}})< 7.8) of starburst galaxies. Thus, they are small counterparts to green pea galaxies and high redshift Lyα emitting galaxies.

The average unit production cost of blood in Zimbabwe from a provider's perspective

NARCIS (Netherlands)

Mafirakureva, N.; Nyoni, H.; Chikwereti, R.; Khoza, S.; Mvere, D.A.; Emmanuel, J.C.; Postma, M.J.; Van Hulst, M.

2014-01-01

Background/Case Studies: Blood utilization and blood transfusion costs are generally perceived to be increasing at a time when healthcare budgets continue being constricted. There is a paucity of published data on the production costs of blood and the costs of blood transfusion in sub-Saharan

A Methodology for Production and Cost Assessment of a Farm of Wave Energy Converters

DEFF Research Database (Denmark)

Beels, C.; Troch, P.; Kofoed, Jens Peter

2011-01-01

to the sea through hydro turbines. It is observed that the cable cost is relatively small compared to the cost of the WD–WECs. As a result, WD–WECs should be installed in a lay-out to increase power production rather than decrease cable cost, taking spatial and safety considerations into account. WD......To generate a substantial amount of power, Wave Energy Converters (WECs) are arranged in several rows or in a ‘farm’. Both the power production and cost of a farm are lay-out dependent. In this paper, the wave power redistribution in and around three farm lay-outs in a near shore North Sea wave...... climate, is assessed numerically using a time-dependent mild-slope equation model. The modelling of the wave power redistribution is an efficient tool to assess the power production of a farm. Further, for each lay-out an optimal (low cost) submarine cable network is designed. The methodology to assess...

Public synthesis of the reference costs study of the electric power production

International Nuclear Information System (INIS)

2008-01-01

Every 3 or 5 years, the DGEC published the reference costs study of the electric power production which evaluates, in a theoretical framework, the total cost of an electrical MWh, from different production ways. These studies bring information for the definition of the energy policy and the elaboration of the investments program. because of the great competition of the market, it was decided not to publish the absolute value of the hypothesis and the results but under indexed form. (A.L.B.)

Cost Evaluation with G4-ECONS Program for SI based Nuclear Hydrogen Production Plant

International Nuclear Information System (INIS)

Kim, Jong-ho; Lee, Ki-young; Kim, Yong-wan

2014-01-01

Contemporary hydrogen is production is primarily based on fossil fuels, which is not considered as environments friendly and economically efficient. To achieve the hydrogen economy, it is very important to produce a massive amount of hydrogen in a clean, safe and efficient way. Nuclear production of hydrogen would allow massive production of hydrogen at economic prices while avoiding environments pollution reducing the release of carbon dioxide. Nuclear production of hydrogen could thus become the enabling technology for the hydrogen economy. The economic assessment was performed for nuclear hydrogen production plant consisting of VHTR coupled with SI cycle. For the study, G4-ECONS developed by EMWG of GIF was appropriately modified to calculate the LUHC, assuming 36 months of plant construction time, 5 % of annual interest rate and 12.6 % of fixed charge rate. In G4-ECONS program, LUHC is calculated by the following formula; LUHC = (Annualized TCIC + Annualized O-M Cost + Annualized Fuel Cycle Cost + Annualized D-D Cost) / Annual Hydrogen Production Rate

Cost of Maple Sap Production for Various Size Tubing Operations

Science.gov (United States)

Niel K. Huyler

2000-01-01

Reports sap production costs for small (500 to 1,000 taps), medium (1,000 to 5,000), and large (5,000 to 15,000) maple syrup operations that use plastic tubing with vacuum pumping. The average annual operating cost per tap ranged from $4.64 for a 500-tap sugarbush operation to $1.84 for a sugarbush with 10,000 taps. The weighted average was $2.87 per tap or $11.48 per...

Biological waste by-production costs in forest management and possibilities for their reduction

Directory of Open Access Journals (Sweden)

Jiří Kadlec

2004-01-01

Full Text Available Biological wastes in forestry were observed from view of their by-production in silvicultural and logging operations. There were identified points where biological waste was produced in this paper, waste costs ratio for silvicultural and logging operations and were made suggestions for reduction of these costs. Biological waste costs give 34.4% of total costs of silvicultural operations and 30% of total costs of logging operations. Natural regeneration and minor forest produce operations are opportunities for reduction of these costs.

Costs of rearing children in agricultural economies: an alternative estimation approach and findings from rural Bangladesh.

Science.gov (United States)

Khan, M M; Magnani, R J; Mock, N B; Saadat, Y S

1993-03-01

There are changes in child costs during demographic transition. This study examines household time allocation from 66 agricultural households in 3 villages in Tangail District in rural north central Bangladesh in 1984-85 (371 days). Component and total child-rearing costs are estimated in alternative ways. Conventional "opportunity wage" measures are considered overestimated. The methodological shortcomings of direct cost accounting procedures and consumer demand methods in computing time cost and monetary cost of child rearing are pointed out. In this study's alternative computation, age standardized equivalent costs are generated. Child food consumption costs were generated from a large national survey conducted in 1983. Nonfood expenditures were estimated by food to nonfood expenditure ratios taken from the aforementioned survey. For estimating breast-feeding costs, an estimate was produced based on the assumption that costs for infant food consumption were a fixed proportion of food costs for older children. Land ownership groups were set up to reflect socioeconomic status: 1) landless households, 2) marginal farm households with 1 acre or .4 hectares of land, 3) middle income households with 1-2 acres of land, 4) upper middle income households with 2-4 acres of land, and 5) upper income or rich households with over 4 acres of land. The nonmarket wage rate for hired household help was used to determine the value of cooking, fetching water, and household cleaning and repairing. The results confirm the low costs of child rearing in high fertility societies. Productive nonmarket activities are effective in subsidizing the costs of children. The addition of a child into households already with children has a low impact on time costs of children; "this economies of scale effect is estimated ... at 20%." The highest relative costs were found in the lowest income households, and the lowest costs were in the highest income households. 5% of total household income is

Impact of timber production and transport costs on stand management

Science.gov (United States)

Chris B. LeDoux; Chris B. LeDoux

1988-01-01

Evaluates the impact of cable logging technology, transportation network standards, and transport vehicles on stand management. Managers can use results to understand the impact of timber production costs on eastern hardwood management.

Renewable Portfolio Standards: Understanding Costs and Benefits | Energy

Science.gov (United States)

considering the highest cost and lowest benefit outcomes. More Information: Fact Sheet Image of a report cover | Presentation Image of a report cover for A Survey of State-Level Cost and Benefit Estimates of Renewable Portfolio Standards: Understanding Costs and Benefits State policymakers, public utilities commissions, and

Epilepsy in Sweden: health care costs and loss of productivity--a register-based approach.

Science.gov (United States)

Bolin, Kristian; Lundgren, Anders; Berggren, Fredrik; Källén, Kristina

2012-12-01

The objective was to estimate health care costs and productivity losses due to epilepsy in Sweden and to compare these estimates to previously published estimates. Register data on health care utilisation, pharmaceutical sales, permanent disability and mortality were used to calculate health care costs and costs that accrue due to productivity losses. By linkage of register information, we were able to distinguish pharmaceuticals prescribed against epilepsy from prescriptions that were prompted by other indications. The estimated total cost of epilepsy in Sweden in 2009 was 441 million, which corresponds to an annual per-patient cost of 8,275. Health care accounted for about 16% of the estimated total cost, and drug costs accounted for about 7% of the total cost. The estimated health care cost corresponded to about 0.2% of the total health care cost in Sweden in 2009. Indirect costs were estimated at 370 million, 84% of which was due to sickness absenteeism. Costs resulting from epilepsy-attributable premature deaths or permanent disability to work accounted for about 1% of the total indirect cost in Sweden in 2009. The per-patient cost of epilepsy is substantial. Thus, even though the prevalence of the illness is relatively small, the aggregated cost that epilepsy incurs on society is significant.

Cost-effective IMTA: a comparison of the production efficiencies of mussels and seaweed

DEFF Research Database (Denmark)

Holdt, Susan Løvstad; Edwards, M. D.

results compared to production cost of €209-672 kg-1 N removed and €1,013 kg-1 N removed for respectively Laminaria digitata and Alaria esculenta from extrapolated laboratory and field trials. However, a commercial seaweed (Saccharina latissima) producer claims that production costs are less than €10 kg-1...... N removed. This up-scaled and commercial figure makes the seaweed cost competitive to mussels for removal of nitrogen. Disadvantages such as predators (e.g. eider ducks) and bio-fouling should also be taken into account before choice of biofilter is made. These drawbacks can reduce overall biofilter...

A smart Monte Carlo procedure for production costing and uncertainty analysis

International Nuclear Information System (INIS)

Parker, C.; Stremel, J.

1996-01-01

Electric utilities using chronological production costing models to decide whether to buy or sell power over the next week or next few weeks need to determine potential profits or losses under a number of uncertainties. A large amount of money can be at stake--often $100,000 a day or more--and one party of the sale must always take on the risk. In the case of fixed price ($/MWh) contracts, the seller accepts the risk. In the case of cost plus contracts, the buyer must accept the risk. So, modeling uncertainty and understanding the risk accurately can improve the competitive edge of the user. This paper investigates an efficient procedure for representing risks and costs from capacity outages. Typically, production costing models use an algorithm based on some form of random number generator to select resources as available or on outage. These algorithms allow experiments to be repeated and gains and losses to be observed in a short time. The authors perform several experiments to examine the capability of three unit outage selection methods and measures their results. Specifically, a brute force Monte Carlo procedure, a Monte Carlo procedure with Latin Hypercube sampling, and a Smart Monte Carlo procedure with cost stratification and directed sampling are examined

Dynamics of a Bertrand duopoly with differentiated products and nonlinear costs: Analysis, comparisons and new evidences

International Nuclear Information System (INIS)

Brianzoni, Serena; Gori, Luca; Michetti, Elisabetta

2015-01-01

This paper studies mathematical properties and dynamics of a duopoly with price competition and horizontal product differentiation by introducing quadratic production costs (decreasing returns to scale), thus extending the model with linear costs (constant returns to scale) of Fanti et al. [11]. The economy is described by a two-dimensional non-invertible discrete time dynamic system. The paper first determines fixed points and other invariant sets, showing that synchronized dynamics can occur. Then, stability properties are compared in the cases of quadratic costs and linear costs by considering the degree of product differentiation and the speed of adjustment of prices as key parameters. It is also shown that synchronization takes place if products tend to be relatively complements and stressed similarities and differences between models with quadratic and linear costs. Finally, the paper focuses on the phenomenon of multistability thus underlying new evidences in comparison with the model with linear costs.

Setting the holding cost rates in a multi-product system with remanufacturing

NARCIS (Netherlands)

U. Corbacı oğ lu; E.A. van der Laan (Erwin)

2005-01-01

textabstractThe Net Present Value (NPV) approach is considered to be the right approach to study inventory and production systems. But, approximate average cost (AC) approach is widely used in both practice and theory. However, the opportunity cost interpretation of AC framework is not that

[Costs with personnel and productivity analysis of family health program teams in Fortaleza, Ceará].

Science.gov (United States)

Rocha Filho, Fernando dos Santos; da Silva, Marcelo Gurgel Carlos

2009-01-01

The research verified the productivity and the operational personnel costs of eight teams of the Family Health Program (PSF) of two Basic Units of Family Health (UBASF) in Fortaleza, Ceará, through the methodology of costs by absorption, in 2004. The largest expenses were with personnel (75%), mainly with the PSF teams, and medicines (18%). The federal allocations received in September, 2004, by each PSF team, were R$ 9,543.33. The total cost by team was R$ 15,719.00. Some professionals of various PSF teams showed productivity above the set objectives, but the average productivity by doctor and nurse was below fifty per cent of objectives, with high idle time making the work onerous. The unity cost of home visits by doctor and prenatal attendance by nurses were checked, and, would be less expensive if the idle time were reduced. Various alternatives of cost reduction were observed, such as scale savings of some resources and services and re-negotiation of contracts with suppliers and cooperatives. The data obtained will contribute to more accurate planning for the installation and maintenance of PSF teams as well as alternatives of cost reductions, higher productivity, and better quality.

External costs of electricity production under scrutiny

International Nuclear Information System (INIS)

Wagner, H.J.; Melchert, A.

1993-01-01

After a short introduction into the problems and questions surrounding the issue of external costs Chapter 2 presents the most important results of the studies under review and analysis in this work. Occasionally, minor discrepancies were found between the results given in the summary of a study and the data reported in the relevant chapters. Chapter 3 identifies and discusses differences in perspective between the studies under consideration. Chapter 4 analyses the most important premises and parameters adopted in the studies for the calculation of overall costs and net benefits of the different modes of electricity production. This serves to probe the reliability of the data, plausibility of the premises, and nature of the presupposed relationships. Chapter 5 examines the relationships of time assumed in the studies and gives a first comment on the more advanced Prognos study. Chapter 6, finally, offers a summarizing evaluation. (orig./UA) [de

Life cycle cost of ethanol production from cassava in Thailand

International Nuclear Information System (INIS)

Sorapipatana, Chumnong; Yoosin, Suthamma

2011-01-01

To increase the security of energy supply, lessen dependence on crude oil import and buffer against the impacts of large change in crude oil prices, the Thai government initiated and officially announced the national ethanol fuel program in year 2000. Since then, domestic ethanol demand has grown rapidly. Presently, all commercial ethanol in Thailand is produced from molasses as Thai law prohibits producing it from sugar cane directly. This is likely to limit ethanol supply in the near future. One possible solution is to supply more ethanol from cassava which is widely cultivated in this country. However, its production cost has not yet been known for certain. The objective of this study is to estimate the life cycle cost of ethanol production from cassava and to assess its economic competitiveness with gasoline in the Thai fuel market. Based on the record of cassava prices during the years 2002-2005, it was found that using it as feedstock would share more than 50% of the ethanol from cassava total production cost. It was also found that a bio-ethanol plant, with a capacity of 150,000 l/day, can produce ethanol from cassava in a range of ex-factory costs from 16.42 to 20.83 baht/l of gasoline equivalent (excluding all taxes), with an average cost of 18.15 baht/l of gasoline equivalent (41, 52 and 45 US cents/l gasoline equivalent respectively, based on 2005 exchange rate). In the same years, the range of 95-octane gasoline prices in Thailand varied from 6.18 baht to 20.86 baht/l, with an average price of 11.50 baht/l (15, 52 and 29 US cents/l respectively, based on 2005 exchange rate) which were much cheaper than the costs of ethanol made from cassava. Thus, we conclude that under the scenario of low to normal crude oil price, ethanol from cassava is not competitive with gasoline. The gasoline price has to rise consistently above 18.15 baht (45 US cents)/l before ethanol made from cassava can be commercially competitive with gasoline. (author)

Life cycle cost of ethanol production from cassava in Thailand

Energy Technology Data Exchange (ETDEWEB)

Sorapipatana, Chumnong; Yoosin, Suthamma [Joint Graduate School of Energy and Environment, King Mongkut' s University of Technology Thonburi, Pracha-Uthit Rd., Tungkru, Bangmod, Bangkok 10140 (Thailand); Center for Energy Technology and Environment, Commission on Higher Education, Ministry of Education, Bangkok (Thailand)

2011-02-15

To increase the security of energy supply, lessen dependence on crude oil import and buffer against the impacts of large change in crude oil prices, the Thai government initiated and officially announced the national ethanol fuel program in year 2000. Since then, domestic ethanol demand has grown rapidly. Presently, all commercial ethanol in Thailand is produced from molasses as Thai law prohibits producing it from sugar cane directly. This is likely to limit ethanol supply in the near future. One possible solution is to supply more ethanol from cassava which is widely cultivated in this country. However, its production cost has not yet been known for certain. The objective of this study is to estimate the life cycle cost of ethanol production from cassava and to assess its economic competitiveness with gasoline in the Thai fuel market. Based on the record of cassava prices during the years 2002-2005, it was found that using it as feedstock would share more than 50% of the ethanol from cassava total production cost. It was also found that a bio-ethanol plant, with a capacity of 150,000 l/day, can produce ethanol from cassava in a range of ex-factory costs from 16.42 to 20.83 baht/l of gasoline equivalent (excluding all taxes), with an average cost of 18.15 baht/l of gasoline equivalent (41, 52 and 45 US cents/l gasoline equivalent respectively, based on 2005 exchange rate). In the same years, the range of 95-octane gasoline prices in Thailand varied from 6.18 baht to 20.86 baht/l, with an average price of 11.50 baht/l (15, 52 and 29 US cents/l respectively, based on 2005 exchange rate) which were much cheaper than the costs of ethanol made from cassava. Thus, we conclude that under the scenario of low to normal crude oil price, ethanol from cassava is not competitive with gasoline. The gasoline price has to rise consistently above 18.15 baht (45 US cents)/l before ethanol made from cassava can be commercially competitive with gasoline. (author)

Is action potential threshold lowest in the axon?

NARCIS (Netherlands)

Kole, Maarten H. P.; Stuart, Greg J.

2008-01-01

Action potential threshold is thought to be lowest in the axon, but when measured using conventional techniques, we found that action potential voltage threshold of rat cortical pyramidal neurons was higher in the axon than at other neuronal locations. In contrast, both current threshold and voltage

Energy cost of negative pion production on deuterium-tritium target

Energy Technology Data Exchange (ETDEWEB)

Kuzminov, V.V. (Petersburg Nuclear Physics Inst., Gatchina, St. Petersburg (Russian Federation)); Petrov, Yu.V. (Petersburg Nuclear Physics Inst., Gatchina, St. Petersburg (Russian Federation)); Shabelski, Yu.M. (Petersburg Nuclear Physics Inst., Gatchina, St. Petersburg (Russian Federation))

1993-12-01

The negative pion production by deuterons (T[sub 0] = 0.8 GeV/nucl.) was calculated for a cylindrical gaseous deuterium-tritium target (the density of DT-mixture is [phi] = 0.5). Revised cross sections of nucleon-nucleus interaction were used in a Monte Carlo simulation and multiple nucleon-nuclei collisions were taken into account. The energy cost of negative pion production is [epsilon][sub [pi][sup -

Costs and indices for domestic oil and gas field equipment and production operations 1990 through 1993

Energy Technology Data Exchange (ETDEWEB)

1994-07-08

This report presents estimated costs and indice for domestic oil and gas field equipment and production operations for 1990, 1991, 1992, and 1993. The costs of all equipment and serives were those in effect during June of each year. The sums (aggregates) of the costs for representative leases by region, depth, and production rate were averaged and indexed. This provides a general measure of the increased or decreased costs from year to year for lease equipment and operations. These general measures do not capture changes in industry-wide costs exactly because of annual variations in the ratio of oil wells to gas wells. The body of the report contains summary tables, and the appendices contain detailed tables. Price changes for oil and gas, changes in taxes on oil and gas revenues, and environmental factors (costs and lease availability) have significant impact on the number and cost of oil and gas wells drilled. These changes also impact the cost of oil and gas production equipment and operations.

Costs and indices for domestic oil and gas field equipment and production operations 1990 through 1993

International Nuclear Information System (INIS)

1994-01-01

This report presents estimated costs and indice for domestic oil and gas field equipment and production operations for 1990, 1991, 1992, and 1993. The costs of all equipment and serives were those in effect during June of each year. The sums (aggregates) of the costs for representative leases by region, depth, and production rate were averaged and indexed. This provides a general measure of the increased or decreased costs from year to year for lease equipment and operations. These general measures do not capture changes in industry-wide costs exactly because of annual variations in the ratio of oil wells to gas wells. The body of the report contains summary tables, and the appendices contain detailed tables. Price changes for oil and gas, changes in taxes on oil and gas revenues, and environmental factors (costs and lease availability) have significant impact on the number and cost of oil and gas wells drilled. These changes also impact the cost of oil and gas production equipment and operations

The lowest surface brightness disc galaxy known

International Nuclear Information System (INIS)

Davies, J.I.; Phillipps, S.; Disney, M.J.

1988-01-01

The discovery of a galaxy with a prominent bulge and a dominant extremely low surface brightness disc component is reported. The profile of this galaxy is very similar to the recently discovered giant low surface brightness galaxy Malin 1. The disc central surface brightness is found to be ∼ 26.4 Rμ, some 1.5 mag fainter than Malin 1 and thus by far the lowest yet observed. (author)

Production low cost plastic scintillator by using commercial polystyrene

International Nuclear Information System (INIS)

2011-01-01

Plastic Scintillators can be described as solid materials which contain organic fluorescent compounds dissolved within a polymer matrix. Transparent plastics commonly used for light scintillation are Polystyrene (or PS, poly-vinyl-benzene) and polyvinyl-toluene (or PVT, poly-methyl-styron). By changing the composition of plastic Scintillators some features such as light yield, radiation hardening, decay time etc. can be controlled. Plastic scintillation detectors have been used in nuclear and high energy physics for many decades. Among their benefits are fast response, ease of manufacture and versatility. Their main drawbacks are radiation resistance and cost. Many research projects have concentrated on improving the fundamental properties of plastic scintillators, but little attention has focussed on their cost and easier manufacturing techniques. First plastic Scintillators were produced in 1950's. Activities for production of low cost Scintillators accelerated in second half of 1970's. In 1975 acrylic based Plexipop Scintillator was developed. Despite its low cost, since its structure was not aromatic the light yield of Plexipop was about one quarter of classical Scintillators. Problems arising from slow response time and weak mechanical properties in scintillators developed, has not been solved until 1980. Within the last decade extrusion method became very popular in preparation of low cost and high quality plastic scintillators. In this activity, preliminary studies for low cost plastic scintillator production by using commercial polystyrene pellets and extrusion plus compression method were aimed. For this purpose, PS blocks consist of commercial fluorescent dopant were prepared in June 2008 by use of the extruder and pres in SANAEM. Molds suitable for accoupling to extruder were designed and manufactured and optimum production parameters such as extrusion temperature profile, extrusion rate and moulding pressure were obtained hence, PS Scintillator Blocks

Trends in real costs of crude oil production: The Middle East vs its competitors

International Nuclear Information System (INIS)

Stauffer, T.R.

1993-01-01

The costs of oil production in the major areas of the world, including both OPEC and non-OPEC countries are discussed. The success of Saudi Arabia's policy of squeezing out non-OPEC oil by unilaterally cutting prices is assessed by examining the variation in costs of production within OPEC, between OPEC and non-OPEC producers, whether there are producing areas which are cost-constrained, whether non-OPEC development has been curbed, and whether lack of capital might constrain future production, especially in OPEC states. It is concluded that low prices have been only partially successful, because in most areas the full-cycle cost of new oil production is still less than the current oil price, even allowing for a 15% rate of return. Low prices have limited new oil development only in the North Sea, the U.S. and Canada, while Oman and Malaysia continue to expand. The pace of drilling has been affected by low prices, and net increases in non-OPEC output has been forestalled. 4 figs

Cost Analysis of Direct Methanol Fuel Cell Stacks for Mass Production

Directory of Open Access Journals (Sweden)

Mauro Francesco Sgroi

2016-11-01

Full Text Available Fuel cells are very promising technologies for efficient electrical energy generation. The development of enhanced system components and new engineering solutions is fundamental for the large-scale deployment of these devices. Besides automotive and stationary applications, fuel cells can be widely used as auxiliary power units (APUs. The concept of a direct methanol fuel cell (DMFC is based on the direct feed of a methanol solution to the fuel cell anode, thus simplifying safety, delivery, and fuel distribution issues typical of conventional hydrogen-fed polymer electrolyte fuel cells (PEMFCs. In order to evaluate the feasibility of concrete application of DMFC devices, a cost analysis study was carried out in the present work. A 200 W-prototype developed in the framework of a European Project (DURAMET was selected as the model system. The DMFC stack had a modular structure allowing for a detailed evaluation of cost characteristics related to the specific components. A scale-down approach, focusing on the model device and projected to a mass production, was used. The data used in this analysis were obtained both from research laboratories and industry suppliers specialising in the manufacturing/production of specific stack components. This study demonstrates that mass production can give a concrete perspective for the large-scale diffusion of DMFCs as APUs. The results show that the cost derived for the DMFC stack is relatively close to that of competing technologies and that the introduction of innovative approaches can result in further cost savings.

Analysis on the cost structure of product recall for reverse supply chain

Science.gov (United States)

Yanhua, Feng; Xuhui, Xia; Zheng, Yang

2017-12-01

The research on the reverse supply chain of product recall mainly focused on the recall network structure, logistics mode and so on. In this paper, when product recall and supply channel are fixed, the specific structure and function expression of cost are analyzed according to the peak season and off-season of recall activities, and whether the assembly manufacturer, supplier and recyclers are cooperated situation, respectively, to build the total cost structure of the function model. Finally, the model is validated correctly through the automotive industry and the electromechanical industry.

78 FR 17648 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

Science.gov (United States)

2013-03-22

... Conservation Program for Consumer Products: Representative Average Unit Costs of Energy'', dated April 26, 2012... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy AGENCY: Office of Energy Efficiency...

Multi-Scale Ordered Cell Structure for Cost Effective Production of Hydrogen by HTWS

Energy Technology Data Exchange (ETDEWEB)

Elangovan, Elango [Ceramatec, Inc., West Valley City, UT (United States); Rao, Ranjeet [PARC, Palo Alto, CA (United States); Colella, Whitney [Gaia Energy Research Inst. LLC, Arlington, VA (United States)

2017-12-20

Production of hydrogen using an electrochemical device provides for large scale, high efficiency conversion and storage of electrical energy. When renewable electricity is used for conversion of steam to hydrogen, a low-cost and low emissions pathway to hydrogen production emerges. This project was intended to demonstrate a high efficiency High Temperature Water Splitting (HTWS) stack for the electrochemical production of low cost H2. The innovations investigated address the limitations of the state of the art through the use of a novel architecture that introduces macro-features to provide mechanical support of a thin electrolyte, and micro-features of the electrodes to lower polarization losses. The approach also utilizes a combination of unique sets of fabrication options that are scalable to achieve manufacturing cost objectives. The development of HTWS process and device is guided by techno-economic and life cycle analyses.

Knocking on Industry’s Door: Needs in Product-Cost Optimization in the Early Product Life Cycle Stages

Directory of Open Access Journals (Sweden)

Matthias Walter

2017-12-01

Full Text Available While theoretical concepts for product-costing methodologies have evolved over the decades, little emphasis has been placed on their integration into modern information systems. During a co-innovation workshop at SAP SE, we initiated our collaborative research with selected large-scale enterprises from the discrete manufacturing industry. Moreover, we conducted interviews with business experts to gain a sophisticated understanding of the cost-optimization process itself. As a result, we present an exemplary optimization process with an emphasis on the specific characteristics of the product development stage. Based upon this example, we identified associated deficits in information system support. No current software fulfills the enterprises’ requirements regarding cost optimization in the early stages of a product’s life cycle. Thus, the respective processes lack integration in corporate environments. Taking this on, our article compiles detailed problem identification and, moreover, suggests approaches to overcome these hurdles.

Production costs: U.S. gas turbine ampersand combined-cycle power plants

International Nuclear Information System (INIS)

Anon.

1992-01-01

This fourth edition of UDI's gas turbine O ampersand M cost report gives 1991 operation and maintenance expenses for over 450 US gas turbine power plants. Modeled on UDI's popular series of O ampersand M cost reports for US steam-electric plants, this report shows operator and plant name, plant year-in-service, installed capacity, 1991 net generation, total fuel expenses, total non-fuel O ampersand M expenses, total production costs, and current plant capitalization. Coverage includes over 90 percent of the utility-owned gas/combustion turbine and combined-cycle plants installed in the country

Abatement cost of GHG emissions for wood-based electricity and ethanol at production and consumption levels.

Directory of Open Access Journals (Sweden)

Puneet Dwivedi

Full Text Available Woody feedstocks will play a critical role in meeting the demand for biomass-based energy products in the US. We developed an integrated model using comparable system boundaries and common set of assumptions to ascertain unit cost and greenhouse gas (GHG intensity of electricity and ethanol derived from slash pine (Pinus elliottii at the production and consumption levels by considering existing automobile technologies. We also calculated abatement cost of greenhouse gas (GHG emissions with respect to comparable energy products derived from fossil fuels. The production cost of electricity derived using wood chips was at least cheaper by 1 ¢ MJ-1 over electricity derived from wood pellets. The production cost of ethanol without any income from cogenerated electricity was costlier by about 0.7 ¢ MJ-1 than ethanol with income from cogenerated electricity. The production cost of electricity derived from wood chips was cheaper by at least 0.7 ¢ MJ-1 than the energy equivalent cost of ethanol produced in presence of cogenerated electricity. The cost of using ethanol as a fuel in a flex-fuel vehicle was at least higher by 6 ¢ km-1 than a comparable electric vehicle. The GHG intensity of per km distance traveled in a flex-fuel vehicle was greater or lower than an electric vehicle running on electricity derived from wood chips depending on presence and absence of GHG credits related with co-generated electricity. A carbon tax of at least $7 Mg CO2e-1 and $30 Mg CO2e-1 is needed to promote wood-based electricity and ethanol production in the US, respectively. The range of abatement cost of GHG emissions is significantly dependent on the harvest age and selected baseline especially for electricity generation.

19 CFR 351.407 - Calculation of constructed value and cost of production.

Science.gov (United States)

2010-04-01

... ANTIDUMPING AND COUNTERVAILING DUTIES Calculation of Export Price, Constructed Export Price, Fair Value, and Normal Value § 351.407 Calculation of constructed value and cost of production. (a) Introduction. This... 19 Customs Duties 3 2010-04-01 2010-04-01 false Calculation of constructed value and cost of...

Investment in cocoa production in Nigeria: A cost and return analysis ...

African Journals Online (AJOL)

The study examined costs and returns in cocoa production in Cross River State by comparing three identified management systems of cocoa production in the area. A two-stage sampling procedure was used to select a hundred and fifty cocoa farmers for the study. Data used in the study were collected using structured ...

Felling and skidding productivity and harvesting cost in southern pine forests

Science.gov (United States)

R.A. Kluender; B.J. Stokes

1996-01-01

Sixteen stands were harvested at various levels of basal area removed (intensity). Chainsaw felling productivity was more sensitive to stem diameter than harvest intensity. Skidding productivity was highest when removing large trees at high intensity. Harvesting cost was more sensitive to stem size than harvest intensity, although harvest intensity was a very important...

System Evaluations and Life-Cycle Cost Analyses for High-Temperature Electrolysis Hydrogen Production Facilities

Energy Technology Data Exchange (ETDEWEB)

Edwin A. Harvego; James E. O' Brien; Michael G. McKellar

2012-05-01

This report presents results of system evaluations and lifecycle cost analyses performed for several different commercial-scale high-temperature electrolysis (HTE) hydrogen production concepts. The concepts presented in this report rely on grid electricity and non-nuclear high-temperature process heat sources for the required energy inputs. The HYSYS process analysis software was used to evaluate both central plant designs for large-scale hydrogen production (50,000 kg/day or larger) and forecourt plant designs for distributed production and delivery at about 1,500 kg/day. The HYSYS software inherently ensures mass and energy balances across all components and it includes thermodynamic data for all chemical species. The optimized designs described in this report are based on analyses of process flow diagrams that included realistic representations of fluid conditions and component efficiencies and operating parameters for each of the HTE hydrogen production configurations analyzed. As with previous HTE system analyses performed at the INL, a custom electrolyzer model was incorporated into the overall process flow sheet. This electrolyzer model allows for the determination of the average Nernst potential, cell operating voltage, gas outlet temperatures, and electrolyzer efficiency for any specified inlet steam, hydrogen, and sweep-gas flow rates, current density, cell active area, and external heat loss or gain. The lifecycle cost analyses were performed using the H2A analysis methodology developed by the Department of Energy (DOE) Hydrogen Program. This methodology utilizes spreadsheet analysis tools that require detailed plant performance information (obtained from HYSYS), along with financial and cost information to calculate lifecycle costs. There are standard default sets of assumptions that the methodology uses to ensure consistency when comparing the cost of different production or plant design options. However, these assumptions may also be varied within the

A Cost Framework for the Economic Feasibility of Wide-Scale Biochar Production

Science.gov (United States)

Pourhashem, G.; Masiello, C. A.; Medlock, K. B., III

2017-12-01

Biochar is a product of biomass pyrolysis, one of the main thermal pathways of producing biofuels. In addition to sequestering carbon, biochar's soil application helps sustainable agriculture by enhancing soil's structure and ecological functions, as well as lowering NO release from fertilized soils. However, wide-scale biochar land amendment has been limited in part due to its high cost. To examine biochar's cost dynamics, we develop a comprehensive framework for a representative biochar production facility and identify system inputs that are the key drivers of cost and profitability. We assess the production cost of fast and slow pyrolysis-biochar considering a range of parameters e.g. biomass type, process design and scale. We analyzed techno-economic cost data for producing biochar using simulated data from academic literature, and active producer data collected under confidentiality agreement. The combined approach was used to enhance the depth of the dataset and allowed for a reasonable check on published simulated data. Fast and slow pyrolysis have different biofuel and biochar yields and profit. A slow pyrolysis facility recovers its expenses mainly through biochar sale while a fast pyrolysis facility generates its primary revenue through biofuel sale, largely considering biochar a byproduct. Unlike fast pyrolysis that has received most attention in techno-economic studies, publicly available techno-economic data of slow pyrolysis is sparse. This limits the ability to run a thorough cost-benefit analysis to inform the feasibility of wider adoption of biochar for capturing its carbon sequestration and broader environmental benefits. Our model allows for consideration of various market-based policy instruments and can be used as an analytical decision making tool for investors and policy makers to estimate the cost and optimum facility size. This dynamic framework can also be adapted to account for the availability of new data as technology improves and

The cost of lost productivity due to premature cancer-related mortality: an economic measure of the cancer burden.

Science.gov (United States)

Hanly, Paul A; Sharp, Linda

2014-03-26

Most measures of the cancer burden take a public health perspective. Cancer also has a significant economic impact on society. To assess this economic burden, we estimated years of potential productive life lost (YPPLL) and costs of lost productivity due to premature cancer-related mortality in Ireland. All cancers combined and the 10 sites accounting for most deaths in men and in women were considered. To compute YPPLL, deaths in 5-year age-bands between 15 and 64 years were multiplied by average working-life expectancy. Valuation of costs, using the human capital approach, involved multiplying YPPLL by age-and-gender specific gross wages, and adjusting for unemployment and workforce participation. Sensitivity analyses were conducted around retirement age and wage growth, labour force participation, employment and discount rates, and to explore the impact of including household production and caring costs. Costs were expressed in €2009. Total YPPLL was lower in men than women (men = 10,873; women = 12,119). Premature cancer-related mortality costs were higher in men (men: total cost = €332 million, cost/death = €290,172, cost/YPPLL = €30,558; women: total cost = €177 million, cost/death = €159,959, cost/YPPLL = €14,628). Lung cancer had the highest premature mortality cost (€84.0 million; 16.5% of total costs), followed by cancers of the colorectum (€49.6 million; 9.7%), breast (€49.4 million; 9.7%) and brain & CNS (€42.4 million: 8.3%). The total economic cost of premature cancer-related mortality in Ireland amounted to €509.5 million or 0.3% of gross domestic product. An increase of one year in the retirement age increased the total all-cancer premature mortality cost by 9.9% for men and 5.9% for women. The inclusion of household production and caring costs increased the total cost to €945.7 million. Lost productivity costs due to cancer-related premature mortality are significant. The higher premature mortality cost in males than

Membrane reforming in converting natural gas to hydrogen: Production costs, Part II

Energy Technology Data Exchange (ETDEWEB)

Iaquaniello, G; Cosenza, S [Technip-KTI S.p.A., via Castello della Magliana 75, Rome (Italy); Giacobbe, F; Morico, B; Farace, A [Processi Innovativi s.r.l., L' Aquila (Italy)

2008-11-15

This paper evaluates the production costs of a hybrid system based on a new membrane reforming MRR concept to convert natural gas to hydrogen and electricity. Membrane reforming with hydrogen-selective, palladium-silver membranes pushes the chemical equilibrium and allows higher methane conversions at lower temperature such as 650 C. The new MRR concept formed of a series of modules is put forward herein. Each module is made up of a reforming step and an external membrane separation unit. The estimates, based on utilities costs of a typical Italian refinery (end of 2006), show that the production costs for the hybrid system are 30% less than conventional tubular steam reforming technology, and 13% less than a gas-fired cogeneration plant coupled with a conventional H{sub 2} plant. (author)

Use of low-cost aluminum in electric energy production

Science.gov (United States)

Zhuk, Andrey Z.; Sheindlin, Alexander E.; Kleymenov, Boris V.; Shkolnikov, Eugene I.; Lopatin, Marat Yu.

Suppression of the parasitic corrosion while maintaining the electrochemical activity of the anode metal is one of the serious problems that affects the energy efficiency of aluminum-air batteries. The need to use high-purity aluminum or special aluminum-based alloys results in a significant increase in the cost of the anode, and thus an increase in the total cost of energy generated by the aluminum-air battery, which narrows the range of possible applications for this type of power source. This study considers the process of parasitic corrosion as a method for hydrogen production. Hydrogen produced in an aluminum-air battery by this way may be further employed in a hydrogen-air fuel cell (Hy-air FC) or in a heat engine, or it may be burnt to generate heat. Therefore, anode materials may be provided by commercially pure aluminum, commercially produced aluminum alloys, and secondary aluminum. These materials are much cheaper and more readily available than special anode alloys of aluminum and high-purity aluminum. The aim of present study is to obtain experimental data for comparison of energy and cost parameters of some commercially produced aluminum alloys, of high-purity aluminum, and of a special Al-ln anode alloy in the context of using these materials as anodes for an Al-air battery and for combined production of electrical power and hydrogen.

What linear programming contributes: world food programme experience with the "cost of the diet" tool.

Science.gov (United States)

Frega, Romeo; Lanfranco, Jose Guerra; De Greve, Sam; Bernardini, Sara; Geniez, Perrine; Grede, Nils; Bloem, Martin; de Pee, Saskia

2012-09-01

Linear programming has been used for analyzing children's complementary feeding diets, for optimizing nutrient adequacy of dietary recommendations for a population, and for estimating the economic value of fortified foods. To describe and apply a linear programming tool ("Cost of the Diet") with data from Mozambique to determine what could be cost-effective fortification strategies. Based on locally assessed average household dietary needs, seasonal market prices of available food products, and food composition data, the tool estimates the lowest-cost diet that meets almost all nutrient needs. The results were compared with expenditure data from Mozambique to establish the affordability of this diet by quintiles of the population. Three different applications were illustrated: identifying likely "limiting nutrients," comparing cost effectiveness of different fortification interventions at the household level, and assessing economic access to nutritious foods. The analysis identified iron, vitamin B2, and pantothenic acid as "limiting nutrients." Under the Mozambique conditions, vegetable oil was estimated as a more cost-efficient vehicle for vitamin A fortification than sugar; maize flour may also be an effective vehicle to provide other constraining micronutrients. Multiple micronutrient fortification of maize flour could reduce the cost of the "lowest-cost nutritious diet" by 18%, but even this diet can be afforded by only 20% of the Mozambican population. Within the context of fortification, linear programming can be a useful tool for identifying likely nutrient inadequacies, for comparing fortification options in terms of cost effectiveness, and for illustrating the potential benefit of fortification for improving household access to a nutritious diet.

Assessment of eight HPV vaccination programs implemented in lowest income countries

OpenAIRE

Ladner, Joël; Besson, Marie-Hélène; Hampshire, Rachel; Tapert, Lisa; Chirenje, Mike; Saba, Joseph

2012-01-01

Abstract Background Cervix cancer, preventable, continues to be the third most common cancer in women worldwide, especially in lowest income countries. Prophylactic HPV vaccination should help to reduce the morbidity and mortality associated with cervical cancer. The purpose of the study was to describe the results of and key concerns in eight HPV vaccination programs conducted in seven lowest income countries through the Gardasil Access Program (GAP). Methods The GAP provides free HPV vaccin...

Alternative methods of modeling wind generation using production costing models

International Nuclear Information System (INIS)

Milligan, M.R.; Pang, C.K.

1996-08-01

This paper examines the methods of incorporating wind generation in two production costing models: one is a load duration curve (LDC) based model and the other is a chronological-based model. These two models were used to evaluate the impacts of wind generation on two utility systems using actual collected wind data at two locations with high potential for wind generation. The results are sensitive to the selected wind data and the level of benefits of wind generation is sensitive to the load forecast. The total production cost over a year obtained by the chronological approach does not differ significantly from that of the LDC approach, though the chronological commitment of units is more realistic and more accurate. Chronological models provide the capability of answering important questions about wind resources which are difficult or impossible to address with LDC models

Energy wood resources availability and delivery cost in Northwest Russia

Energy Technology Data Exchange (ETDEWEB)

Gerasimov, Yuri; Karjalainen, Timo [Finnish Forest Research Inst., Joensuu (Finland)], E-mail: yuri.gerasimov@metla.fi

2013-10-01

Availability of solid by-products from wood harvesting and mechanical wood processing was estimated as sources for energy production based on recent actual harvesting, sawmill, and plywood production in Northwest Russia at 30 million m{sup 3}. Nearly 70% of the energy wood, 20 million m{sup 3}, was from harvesting, consisting of non-industrial round wood, unused branches and tops, defective wood resulting from logging, and spruce stumps removed after final felling. Over 30%, 10 million m{sup 3}, of the available volume was from sawmills and plywood mills, i.e. wood chips, sawdust, and bark. Due to current low utilization of energy wood for bioenergy in Northwest Russia, delivery cost of energy wood to the potential border-crossing points in Finland was analyzed for three means of transport: railways, roadways, and waterways. Nearly 28 million m{sup 3} of the energy wood could be transported by railways and 2 million m{sup 3} by roadways and waterways. The costs were lowest by roadways from the nearby border areas (10-15 Euro/m{sup 3} for wood processing by-products and 16-22 Euro/m{sup 3} for forest chips). The costs by railways varied from 12 to 27 Euro/m{sup 3} on shorter distances to 47-58 Euro/m{sup 3} on longer distances. Waterway transportation was the most expensive, about 28-48 Euro/m{sup 3}. It should be emphasized that we have estimated availability and delivery costs of energy wood, not prices which are defined by the market based on supply and demand.

Performance of Nursing Awassi Ewes Fed Different Levels of Bread By-product

Science.gov (United States)

Obeidat, B. S.; Haddad, S. G.; Titi, H. H.; Abu Ishmais, M. A.; Telfah, B. T.

2012-01-01

Objective of this experiment was to evaluate the effect of partial substitution of barley grain with bread by-product (BB) on performance of Awassi ewes and their lambs. Forty Awassi ewes rearing single lambs were randomly allotted into four experimental diets containing various levels of BB. The experimental diets contained 0 (BB0), 10 (BB10), 15 (BB15), and 20% (BB20) of BB on dietary dry matter (DM). The study lasted for eight weeks, in which the first week was used as an adaptation period and seven weeks of data collection. Ewes and their lambs were penned individually where they were fed their lactating diets ad libitum. Ewes and lambs body weights were measured at the beginning and at the end of the experiment. However, milk production and composition were evaluated biweekly. Feeding BB had no effect (p>0.05) on dry matter (DM), organic matter (OM), and crude protein (CP) intakes. However, neutral detergent fiber (NDF) intake was the lowest (pby-product had no effect (p>0.05) on ewes body weight change and on lamb performance (i.e., weaning body weight and average daily gain). Similarly, no differences (p>0.05) were observed either in milk production or composition by the BB substitution. Inclusion of BB reduced feed cost by 9, 14, and 18% for the BB10, BB15, and BB20 diets, respectively. No differences were observed in milk efficiency (DM intake: milk production; p>0.05) among diets. However, cost of milk production ($US/kg milk) was the lowest (pby-product up to 20% of the diet DM had no effect on performance of Awassi ewes and their lambs and reduced feed cost. PMID:25049672

The burden of mortality with costs in productivity loss from occupational cancer in Italy.

Science.gov (United States)

Binazzi, Alessandra; Scarselli, Alberto; Marinaccio, Alessandro

2013-11-01

The costs of productivity loss due to occupational cancer mortality are rarely investigated. An estimate of occupational cancer deaths in Italy in 2006 and an approximation of the resultant costs from medical and non-medical expenditures together with figures of remuneration lost are provided. Occupational cancer deaths, obtained from the application of the attributable fraction (AF) to mortality data (source: Italian National Institute of Statistics), were used to calculate the Potential Years of Life Lost (PYLLs), the Potential Years of Working Life Lost (PYWLLs) and the costs of the loss of productive life. The health care costs for any cancer was applied to the estimated number of occupational cancer cases to obtain the total cost. Around 8,000-8,500 deaths/year from occupational cancer are estimated to occur in Italy, corresponding to 170,000 PYLLs and more than 16,000 PYWLLs, leading to around 360,000,000 euros in indirect economic loss. Health care costs of occupational cancer are estimated at 456,000,000 euros. Occupational cancer is of major concern in terms of mortality and economic productivity loss. Preventive efforts in evaluating ongoing risks and current exposures are strongly recommended to health policy-makers. Copyright © 2013 Wiley Periodicals, Inc.

Uncertainties in Early-Stage Capital Cost Estimation of Process Design – A Case Study on Biorefinery Design

International Nuclear Information System (INIS)

Cheali, Peam; Gernaey, Krist V.; Sin, Gürkan

2015-01-01

Capital investment, next to the product demand, sales, and production costs, is one of the key metrics commonly used for project evaluation and feasibility assessment. Estimating the investment costs of a new product/process alternative during early-stage design is a challenging task, which is especially relevant in biorefinery research where information about new technologies and experience with new technologies is limited. A systematic methodology for uncertainty analysis of cost data is proposed that employs: (a) bootstrapping as a regression method when cost data are available; and, (b) the Monte Carlo technique as an error propagation method based on expert input when cost data are not available. Four well-known models for early-stage cost estimation are reviewed and analyzed using the methodology. The significance of uncertainties of cost data for early-stage process design is highlighted using the synthesis and design of a biorefinery as a case study. The impact of uncertainties in cost estimation on the identification of optimal processing paths is indeed found to be profound. To tackle this challenge, a comprehensive techno-economic risk analysis framework is presented to enable robust decision-making under uncertainties. One of the results using order-of-magnitude estimates shows that the production of diethyl ether and 1,3-butadiene are the most promising with the lowest economic risks (among the alternatives considered) of 0.24 MM$/a and 4.6 MM$/a, respectively.

Uncertainties in Early-Stage Capital Cost Estimation of Process Design – A Case Study on Biorefinery Design

Energy Technology Data Exchange (ETDEWEB)

Cheali, Peam; Gernaey, Krist V.; Sin, Gürkan, E-mail: gsi@kt.dtu.dk [Department of Chemical and Biochemical Engineering, Technical University of Denmark, Lyngby (Denmark)

2015-02-06

Capital investment, next to the product demand, sales, and production costs, is one of the key metrics commonly used for project evaluation and feasibility assessment. Estimating the investment costs of a new product/process alternative during early-stage design is a challenging task, which is especially relevant in biorefinery research where information about new technologies and experience with new technologies is limited. A systematic methodology for uncertainty analysis of cost data is proposed that employs: (a) bootstrapping as a regression method when cost data are available; and, (b) the Monte Carlo technique as an error propagation method based on expert input when cost data are not available. Four well-known models for early-stage cost estimation are reviewed and analyzed using the methodology. The significance of uncertainties of cost data for early-stage process design is highlighted using the synthesis and design of a biorefinery as a case study. The impact of uncertainties in cost estimation on the identification of optimal processing paths is indeed found to be profound. To tackle this challenge, a comprehensive techno-economic risk analysis framework is presented to enable robust decision-making under uncertainties. One of the results using order-of-magnitude estimates shows that the production of diethyl ether and 1,3-butadiene are the most promising with the lowest economic risks (among the alternatives considered) of 0.24 MM$/a and 4.6 MM$/a, respectively.

The lowest Landau level in QCD

Directory of Open Access Journals (Sweden)

Bruckmann Falk

2017-01-01

Full Text Available The thermodynamics of Quantum Chromodynamics (QCD in external (electro-magnetic fields shows some unexpected features like inverse magnetic catalysis, which have been revealed mainly through lattice studies. Many effective descriptions, on the other hand, use Landau levels or approximate the system by just the lowest Landau level (LLL. Analyzing lattice configurations we ask whether such a picture is justified. We find the LLL to be separated from the rest by a spectral gap in the two-dimensional Dirac operator and analyze the corresponding LLL signature in four dimensions. We determine to what extent the quark condensate is LLL dominated at strong magnetic fields.

Costs and indices for domestic oil and gas field equipment and production operations 1994 through 1997

International Nuclear Information System (INIS)

1998-03-01

This report presents estimated costs and cost indices for domestic oil and natural gas field equipment and production operations for 1994, 1995, 1996, and 1997. The costs of all equipment and services are those in effect during June of each year. The sums (aggregates) of the costs for representative leases by region, depth, and production rate were averaged and indexed. This provides a general measure of the increased or decreased costs from year to year for lease equipment and operations. These general measures do not capture changes in industry-wide costs exactly because of annual variations in the ratio of the total number of oil wells to the total number of gas wells. The detail provided in this report is unavailable elsewhere. The body of this report contains summary tables, and the appendices contain detailed tables. Price changes for oil and gas, changes in taxes on oil and gas revenues, and environmental factors (compliance costs and lease availability) have a significant impact on the number and cost of oil and gas wells drilled. These changes also impact the cost of oil and gas equipment and production operations

AN INVESTIGATION OF THE APPLICABILITY OF SOFTWARE PRODUCT LINE ENGINEERING FOR ENERGY AND COST-EFFICIENT GREENHOUSE PRODUCTION

DEFF Research Database (Denmark)

Mærsk-Møller, Hans Martin

product line architecture, and how the variability is managed and described using SPLE. It also describes how the DynaLight software product line and its products were developed. Doing so, it shows utilization of rich client platform technology in conjunction with SPLE, which has not been described....... Supplementary lighting is utilized to compensate for the light conditions in the darker months of the year in order to grow certain plants. This is both energy consuming and expensive, as the cost of electricity is high. New knowledge on the plasticity in plants to irregular light patterns is basis for a novel...... and cost, and two desktop tools, the first, DynaLight Desktop, a day-ahead-light-planning tool, and the second, DynaLight Desktop w/control, with the added capability to execute the plans by actuating the light inside the greenhouses. This work provides a SPLE methodology explicitly customized to our...

The Hepatitis C Genotype 1 Paradox: Cost per Treatment Is Increasing, but Cost per Cure Is Decreasing

Directory of Open Access Journals (Sweden)

Stephen D Shafran

2015-01-01

Full Text Available Significant attention has been focused on the perceived increase in the cost of antiviral treatment for hepatitis C genotype 1 infection since the approval of the first direct-acting antiviral agents in 2011. Using Canadian list prices, the present analysis points out a paradox: while the cost per antiviral regimen is increasing, the cost per cure is decreasing, especially with interferon-free therapy. In a publicly funded health care system, the lowest cost per cure is a more valuable measure of value for public money than the cost per regimen.

The hepatitis C genotype 1 paradox: cost per treatment is increasing, but cost per cure is decreasing.

Science.gov (United States)

Shafran, Stephen D

2015-01-01

Significant attention has been focused on the perceived increase in the cost of antiviral treatment for hepatitis C genotype 1 infection since the approval of the first direct-acting antiviral agents in 2011. Using Canadian list prices, the present analysis points out a paradox: while the cost per antiviral regimen is increasing, the cost per cure is decreasing, especially with interferon-free therapy. In a publicly funded health care system, the lowest cost per cure is a more valuable measure of value for public money than the cost per regimen.

Impact on cost accuracy and profitability from implementing product configuration system – A case-study

DEFF Research Database (Denmark)

Myrodia, Anna; Kristjansdottir, Katrin; Hvam, Lars

2015-01-01

This article aims at analyzing the impacts from implementing a product configuration system (PCS) on company profitability and improved cost estimations in the sales phase. Companies that have implemented PCSs have achieved substantial benefits in terms of being more in control of their product...... assortment, making the right decisions in the sales phase and increased sales of optimal products. Those benefits should have direct impact on improved profitability in terms of increased contribution ratios and more accurate cost estimations used to determine the price in the budgetary quotations...... and accuracy of the cost estimation in the sales phase can be achieved from implementing a PCS....

Analyzing cost efficient production behavior under economies of scope : A nonparametric methodology

NARCIS (Netherlands)

Cherchye, L.J.H.; de Rock, B.; Vermeulen, F.M.P.

2008-01-01

In designing a production model for firms that generate multiple outputs, we take as a starting point that such multioutput production refers to economies of scope, which in turn originate from joint input use and input externalities. We provide a nonparametric characterization of cost-efficient

Accurate costs of blood transfusion: a microcosting of administering blood products in the United Kingdom National Health Service.

Science.gov (United States)

Stokes, Elizabeth A; Wordsworth, Sarah; Staves, Julie; Mundy, Nicola; Skelly, Jane; Radford, Kelly; Stanworth, Simon J

2018-04-01

In an environment of limited health care resources, it is crucial for health care systems which provide blood transfusion to have accurate and comprehensive information on the costs of transfusion, incorporating not only the costs of blood products, but also their administration. Unfortunately, in many countries accurate costs for administering blood are not available. Our study aimed to generate comprehensive estimates of the costs of administering transfusions for the UK National Health Service. A detailed microcosting study was used to cost two key inputs into transfusion: transfusion laboratory and nursing inputs. For each input, data collection forms were developed to capture staff time, equipment, and consumables associated with each step in the transfusion process. Costing results were combined with costs of blood product wastage to calculate the cost per unit transfused, separately for different blood products. Data were collected in 2014/15 British pounds and converted to US dollars. A total of 438 data collection forms were completed by 74 staff. The cost of administering blood was $71 (£49) per unit for red blood cells, $84 (£58) for platelets, $55 (£38) for fresh-frozen plasma, and $72 (£49) for cryoprecipitate. Blood administration costs add substantially to the costs of the blood products themselves. These are frequently incurred costs; applying estimates to the blood components supplied to UK hospitals in 2015, the annual cost of blood administration, excluding blood products, exceeds $175 (£120) million. These results provide more accurate estimates of the total costs of transfusion than those previously available. © 2018 AABB.

Trends in real costs of crude oil production: the Middle East vs its competitors

International Nuclear Information System (INIS)

Stauffer, T.R.

1994-01-01

''Costs'' reflect all exploration and development outlays and include a 15% real rate of return. Costs in itself is generally not a barrier to new developments in OPEC countries. Costs are notably higher for most non-OPEC countries where they do inhibit developments. Mexico and Russia are potentially low cost producers. In the North Sea the cost-price squeeze is crucial. Low prices have forestalled net increases in new non-OPEC production. (author)

Economic analysis of different mulch applications and irrigation programs in apple production

Directory of Open Access Journals (Sweden)

Dilek Karamürsel

2017-12-01

Full Text Available Economic analysis of different mulch materials and irrigation programs on Fuji apple variety grafted onto M9 rootstock was made in this study. Mulch treatments consisted of four different mulch materials including black textile, wheat straw, rose oil processing wastes and no mulch. There were three different irrigation programs for each mulch treatment. Irrigation programs also consisted of three different programs including starting irrigation when available water holding capacity of 20%, 40% and 60% at the effective root zone. Total production costs had fluctuating according to treatments. While rose oil processing and the program starting irrigation when available water holding capacity of 60% at the root zone was used had the lowest total production costs, wheat straw and the program starting irrigation when available water holding capacity of 20% at the root zone was used had the highest values. But, black textile mulch and the program which starting at irrigation when available water holding capacity of 20% at the root zone was used had the lowest unit production cost with 0.39 TL kg-1 highest yield, extra and class I fruits. Furthermore, according to apple marketing prices of 2014, considering yield and fruit quality, the highest gross profit with 51 223 TL ha-1 was obtained from black textile mulch and the program starting irrigation when available water holding capacity of 20% at the root zone was used.

Understanding the reductions in US corn ethanol production costs: an experience curve approach

NARCIS (Netherlands)

Hettinga, W.; Junginger, H.M.; Dekker, S.C.; Hoogwijk, M.; McAloon, A.; Hicks, K.

2009-01-01

The US is currently the world's largest ethanol producer. An increasing percentage is used as transportation fuel, but debates continue on its costs competitiveness and energy balance. In this study, technological development of ethanol production and resulting cost reductions are investigated by

THE IMPACT OF THE BASIC ASSETS EFFICIENCY ON THE OF CONSTRUCTION PRODUCTS COST PRICE

Directory of Open Access Journals (Sweden)

M. Z. Zeynalov

2015-01-01

Full Text Available In article are considered problems of the analysis of the influence mode to usages and conditions of the building technology and facilities to mechanizations on prime cost produced building product. It is offered original scheme intercropping the factors, in accordance with influence of the working expenses of the facilities of the lab our on prime cost of the building product. The offered methods of the estimation physical wear-out level of the building technology and competitiveness of the active part of production assets of the building enterprise.

Production, Cost and Chip Characteristics of In-Woods Microchipping

Science.gov (United States)

J. Thompson; W. Sprinkle

2013-01-01

Emerging markets for biomass have increased the interest in producing microchips in the field. As a component of a large United States Department of Energy (DOE) funded project, microchipping has been trialed on a limited scale. The goal of the research was to evaluate the production, cost and chip characteristics of a mobile disc chipper configured to produce...

Cost-effective IMTA: a comparison of the production efficiencies of mussels and seaweed

DEFF Research Database (Denmark)

Holdt, Susan Løvstad; Edwards, Maeve D.

2014-01-01

seaweed with regard to the amount of nitrogen assimilated. Furthermore, in optimized systems, areal requirement for mussels is similar to the cultivation of the same tonnage (1,000 t) of seaweed (approximately 8 ha). The cost-effectiveness of a mussel biofilter is €11–30 kg−1 nitrogen (N) removed based...... on various examples compared to production costs of €209–672 removed and €1,013 kg−1 N removed, respectively, for Laminaria digitata and Alaria esculenta from extrapolated laboratory and field trials. However, commercial seaweed (Saccharina latissima) producers claim that production costs are less than €10......–38 kg−1 N removed. These up-scaled and commercial figures make the seaweed cost competitive to mussels for removal of nitrogen. Disadvantages such as predators (e.g. eider ducks) and biofouling should also be taken into account before choice of biofilter is made. These drawbacks can reduce overall...

Production rates and costs of cable yarding wood residue from clearcut units

Science.gov (United States)

Chris B. LeDoux

1984-01-01

Wood residue is a little used source of fiber, chips, and fuel because harvest costs are largely unknown. This study calculates incremental production rates and costs for yarding and loading logging residue in clearcut old-growth Douglas-fir/western hemlock forests. Harvest operations were observed for two timber sales in western Oregon. Three different cable yarding...

42 CFR 50.504 - Allowable cost of drugs.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Allowable cost of drugs. 50.504 Section 50.504... APPLICABILITY Maximum Allowable Cost for Drugs § 50.504 Allowable cost of drugs. (a) The maximum amount which may be expended from program funds for the acquisition of any drug shall be the lowest of (1) The...

Analyzing Cost Efficient Production Behavior Under Economies of Scope : A Nonparametric Methodology

NARCIS (Netherlands)

Cherchye, L.J.H.; de Rock, B.; Vermeulen, F.M.P.

2006-01-01

In designing a production model for firms that generate multiple outputs, we take as a starting point that such multi-output production refers to economies of scope, which in turn originate from joint input use and input externalities. We provide a nonparametric characterization of cost efficient

Visual representation of costs in the productive process: a case study on a footwear industry in Portugal

Directory of Open Access Journals (Sweden)

Levi da Silva Guimarães

2015-12-01

Full Text Available Over the last decades, conventional production systems have gone through changes in the face of intensified competition among companies. The occurrence of these changes has boosted the development of decision-making assistance tools for the production systems. However, most of these instruments do not allow the visualization of the costs involved throughout industrial operations. This study comprises the integration of the "Waste Identification Diagrams" (WID, current tool for visualization and analysis of production processes, along with "Time-Driven Activity-Based Costing" (TDABC, strategic management cost tool, seeking to create a model that visually demonstrates waste and relate its occurrence to operating costs. For that, the research adopted a descriptive-exploratory approach, based on a case study carried out in a footwear industry. The analysis showed that the integration of tools allowed for the representation of costs based on the time equations from the TDABC, associated with the visualization of the production process by the WID. The study concludes that the WID can be integrated to the TDABC tool, creating a management model for making decisions based on the operating costs of the production process.

Cost benefit justification of nuclear plant reliability improvement

International Nuclear Information System (INIS)

El-Sayed, M.A.H.; Abdelmonem, N.M.

1986-01-01

Nuclear power costs are evaluated on the bases of general ground rules (a) vary from time to time (b) vary from country to another (c) even vary from one reactor type to another. The main objective of an electric utility is to provide the electric energy to the different consummers at the lowest possible cost with reasonable reliability level. Rapid increase of the construction costs and fuel prices in recent years have stimulated a great deal of interest in improving the reliability and productivity of new and existing power plants. One of the most important areas is the improvement of the secondary steam loop and the reactor cooling system. The method for evaluating the reliability of steam loop and cooling system utilizes the cut-set technique. The developed method can be easily used to show to what extent the overall reliability of the nuclear plant is affected by the possible failures in the steam and cooling subsystem. The cost reliability trade-off analysis is used to evaluate alternative schemes in the design with a view towards meeting a high reliability goal. Based on historical or estimated failure and repair rate, the reliability of the alternate scheme can be calculated

Geographical analyses of wood chips potentials, cost and supply for sustainable energy production in Denmark

DEFF Research Database (Denmark)

Möller, Bernd

2004-01-01

The paper presents a study which uses a practical application of rasterbased geographical information system to perform cost-supply analysis of wood chips resources for energy production.......The paper presents a study which uses a practical application of rasterbased geographical information system to perform cost-supply analysis of wood chips resources for energy production....

Performance of Nursing Awassi Ewes Fed Different Levels of Bread By-product

Directory of Open Access Journals (Sweden)

B. S. Obeidat

2012-08-01

Full Text Available Objective of this experiment was to evaluate the effect of partial substitution of barley grain with bread by-product (BB on performance of Awassi ewes and their lambs. Forty Awassi ewes rearing single lambs were randomly allotted into four experimental diets containing various levels of BB. The experimental diets contained 0 (BB0, 10 (BB10, 15 (BB15, and 20% (BB20 of BB on dietary dry matter (DM. The study lasted for eight weeks, in which the first week was used as an adaptation period and seven weeks of data collection. Ewes and their lambs were penned individually where they were fed their lactating diets ad libitum. Ewes and lambs body weights were measured at the beginning and at the end of the experiment. However, milk production and composition were evaluated biweekly. Feeding BB had no effect (p>0.05 on dry matter (DM, organic matter (OM, and crude protein (CP intakes. However, neutral detergent fiber (NDF intake was the lowest (p0.05 on ewes body weight change and on lamb performance (i.e., weaning body weight and average daily gain. Similarly, no differences (p>0.05 were observed either in milk production or composition by the BB substitution. Inclusion of BB reduced feed cost by 9, 14, and 18% for the BB10, BB15, and BB20 diets, respectively. No differences were observed in milk efficiency (DM intake: milk production; p>0.05 among diets. However, cost of milk production ($US/kg milk was the lowest (p<0.05 in the diet containing BB20. Results of the present study indicate that feeding bread by-product up to 20% of the diet DM had no effect on performance of Awassi ewes and their lambs and reduced feed cost.

Cost reduction in the production process using the ABC and Lean tools: Case Study in the refrigeration components industry

Directory of Open Access Journals (Sweden)

Levi da Silva Guimarães

2015-03-01

Full Text Available This paper focuses on production management with respect to operating costs that relate directly to the value of the product. For this study, three methods were used, ABC - Activity Based Costing, which provides accurate information about the knowledge of the real costs, VSM - Value Stream Mapping and Lean Manufacturing. The method adopted for this research was the case study. The study was conducted at a refrigeration components company in the Industrial Center of Manaus. The analyses and observations initially went through the process of mapping the value stream, measuring the current state of activities (cycle time, setup, etc.. After analysis it was possible to map the cost for each activity and finally calculate the cost of the product before and after the improvements resulting from the lean methodology. The results obtained in this study showed a 20% reduction in product costs resulting from operational improvements. The activity-based cost led to a discovery of the real costs of waste. The steps for this study include process mapping through the value stream, measuring the current state of activities (cycle time, setup, etc., establishing the cost driver for each activity, and finally calculating the cost of the product before and after the application of lean improvements. The paper was conducted through literature and descriptive review, and used a case study method. It describes the model that has been tested in a production line for a refrigeration components company from the Manaus Industrial Center, achieving a 20% reduction in product cost.

Costs and indices for domestic oil and gas field equipment and production operations, 1992--1995

International Nuclear Information System (INIS)

1996-08-01

This report presents estimated costs and cost indices for domestic oil and natural gas field equipment and production operations for 1992, 1993, 1994, and 1995. The costs of all equipment and services are those in effect during June of each year. The sum (aggregates) of the costs for representative leases by region, depth, and production rate were averaged and indexed. This provides a general measure of the increased or decreased costs from year to year for lease equipment and operations. These general measured do not capture changes in industry-wide costs exactly because of annual variations in the ratio of the total number of oil wells to the total number of gas wells. The detail provided in this report is unavailable elsewhere. The body of this report contains summary tables, and the appendices contain detailed tables

External costs of electricity production: case study Croatia

International Nuclear Information System (INIS)

Bozicevic Vrhovcak, Maja; Tomsic, Zeljko; Debrecin, Nenad

2005-01-01

Because electricity production is one of the major sources of pollution, and at the same time is the most centralised one, environmental issues in power system operation and planning are gaining ever-increasing attention. It is very difficult to compare environmental impacts of various electricity generation technologies and fuel types because they are extremely divergent. The most widely accepted common denominator today is the so-called external cost by which a monetary value is associated with environmental damage. In this paper, damages to human health resulting from Croatian thermal power plants annual operation are presented. Stack emissions have been translated into ambient concentrations by atmospheric dispersion modelling. Existing data on relations between human health degradation and ground concentrations of the analysed pollutants have been used. Geographic information software has been used in order to account for spatially dependent data. Monetary values have been assigned to the estimated human health damage. External costs resulting from impact of Croatian thermal power plants airborne emissions on human health have been calculated. The total Croatian thermal power system external costs, resulting from impacts on human health, are presented and discussed

OPTIMIZATION OF TIMES AND COSTS OF PROJECT OF HORIZONTAL LAMINATOR PRODUCTION USING PERT/CPM TECHNICAL

Directory of Open Access Journals (Sweden)

Fernando Henrique Lermen

2016-09-01

Full Text Available The PERT/CPM is a technique widely used in both the scheduling and in the project feasibility in terms of cost control and time.  In order to optimize time and costs involved in production, the work presented here aims to apply the PERT/CPM technique in the production project of the Horizontal Laminator, a machine used to cut polyurethane foam blocks in the mattresses industries. For the application of PERT/CPM technique in the project of Horizontal Laminator production were identified the activities that compose the project, the dependence between them, the normal and accelerated durations and the normal and accelerated costs. In this study, deterministic estimates for the duration of the activities were considered. The results show that the project can be completed in 520 hours at a total cost of R$7,042.50, when all activities are performed in their normal durations.  When all the activities that compose the critical path are accelerated, the project can be completed in 333.3 hours at a total cost of R$9,263.01. If the activities slacks have been exploited, it can obtain a final total cost of R$6,157.8, without changing the new duration of the project. It is noteworthy that the final total cost of the project if the slacks are used, will be lower than the initial cost. Regarding the initial cost of the project, after the application of the PERT/CPM technique, it presents a decrease of 12.56% of the total project cost.

Australian uranium production and trade trends

International Nuclear Information System (INIS)

Armstrong, G.; Braddick, P.

1994-01-01

After overviewing the factors influencing the worldwide production and consumption of uranium, the authors review the world situation and assess the industry in Australia and the impact of Government policy on uranium mining. The conclusion is that Australia, with almost 30 per cent of the western world's uranium resources, including several of the highest grade and lowest cost deposits in the world, remains well placed to enjoy a substantial share of growth in the uranium market, should existing Government restrictions be lifted. 6 figs., 2 tabs

Operational strategy and marginal costs in simple trigeneration systems

International Nuclear Information System (INIS)

Lozano, M.A.; Carvalho, M.; Serra, L.M.

2009-01-01

As a direct result of economic pressures to cut expenses, as well as the legal obligation to reduce emissions, companies and businesses are seeking ways to use energy more efficiently. Trigeneration systems (CHCP: Combined Heating, Cooling and Power generation) allow greater operational flexibility at sites with a variable demand for energy in the form of heating and cooling. This is particularly relevant in buildings where the need for heating is restricted to a few winter months. In summer, the absorption chillers make use of the cogenerated heat to produce chilled water, avoiding waste heat discharge. The operation of a simple trigeneration system is analyzed in this paper. The system is interconnected to the electric utility grid, both to receive electricity and to deliver surplus electricity. For any given demand required by the users, a great number of operating conditions are possible. A linear programming model provides the operational mode with the lowest variable cost. A thermoeconomic analysis, based on marginal production costs, is used to obtain unit costs for internal energy flows and final products as well as to explain the best operational strategy as a function of the demand for energy services and the prices of the resources consumed. (author)

Production Costs of Alternative Transportation Fuels. Influence of Crude Oil Price and Technology Maturity

Energy Technology Data Exchange (ETDEWEB)

Cazzola, Pierpaolo; Morrison, Geoff; Kaneko, Hiroyuki; Cuenot, Francois; Ghandi, Abbas; Fulton, Lewis

2013-07-01

This study examines the production costs of a range of transport fuels and energy carriers under varying crude oil price assumptions and technology market maturation levels. An engineering ''bottom-up'' approach is used to estimate the effect of the input cost of oil and of various technological assumptions on the finished price of these fuels. In total, the production costs of 20 fuels are examined for crude oil prices between USD 60 and USD 150 per barrel. Some fuel pathways can be competitive with oil as their production, transport and storage technology matures, and as oil price increases. Rising oil prices will offer new opportunities to switch to alternative fuels for transport, to diversify the energy mix of the transport sector, and to reduce the exposure of the whole system to price volatility and potential distuption of supply. In a time of uncertainty about the leading vehicle technology to decarbonize the transport sector, looking at the fuel cost brings key information to be considered to keep mobility affordable yet sustainable.

The full costs of thermal power production in Eastern Canada

International Nuclear Information System (INIS)

Venema, H.D.; Barg, S.

2003-07-01

This study examines the public health and global warming costs associated with generating electricity with fossil fuels such as coal, oil or natural gas. A Full Cost Accounting approach was used to determine the costs for Eastern Canada. The electricity sector is chosen because it is a large emitter of air pollutants and greenhouse gases. The sector it will undergo potentially significant structural changes as Canada complies with the Kyoto Protocol. Alternative investments in nonpolluting sources of electricity should include analysis of full costs. Two types of factors are evaluated in this study: the public health costs caused by emissions of sulphur and nitrogen oxides and volatile organic carbon (VOC) in Eastern Canada, and the marginal climate change damages caused by the emissions of greenhouse gasses (GHGs) in Eastern Canada. The major contribution of this study is the application of the impact-pathway approach to power sector emissions. Recent Canadian studies have reported either the pollutant emission rates for different power generation technologies and fuels, or the health costs of ambient air pollution not specifically attributable to the power sector. This study isolates the component of air pollution attributable to the power sector and analyses its geographic distribution. It was concluded that coal-fired generation should be closely monitored because the externalities burden is the same magnitude as the marginal production cost. 77 refs., 20 tabs., 21 figs