Trends and Issues in California's Low Carbon Fuel Standard - Learning from Response to Existing Climate Policy

Science.gov (United States)

Witcover, J.

2015-12-01

Debate over lower greenhouse gas (GHG) emissions from transportation has included heated discussion about appropriate policies and their cost and feasibility. One prominent policy mechanism, a carbon intensity standard, rates transport fuels based on analysis of lifecycle GHG emissions, and targets lower fuel pool carbon intensity through a market mechanism that uses a system of tradable, bankable credits and deficits. California instituted such a policy -- the Low Carbon Fuel Standard (LCFS) - in 2010, which targets a 10% carbon intensity (CI) reduction by 2020. The program rolled out amid concerns over slow development of new fuels expected to be very low carbon (such as cellulosic) and has faced court challenges that added considerable policy uncertainty. Since the program's start, state transport energy mix has shifted modestly but noticeably. Looking ahead, emerging issues for the program include amendments and re-adoption in response to a court ruling, potential interaction with California's multi-sector cap on carbon emissions (which started covering transport fuels in 2015), and impacts from similar CI standards in other jurisdictions. This study provides an analysis of fuel mix changes since the LCFS was implemented in 2011, and a discussion of emerging issues focusing on policy interaction. Descriptive statistics on alternative fuel use, available fuel pathways, and CI ratings are presented based on data from the California Air Resources Board (which runs the program). They document a shift towards more alternative fuels in a more diverse mix, with lower average CI ratings for most alternative fuel types. Financial incentives for various fuels are compared under the LCFS and the US federal Renewable Fuel Standard; disincentives from conceptually different carbon pricing schemes under the LCFS and the Cap-and-Trade are also outlined. The results provide important information on response to an existing market-based policy mechanism for addressing GHG

Stabilization Policy and the Costs of Dollarization

OpenAIRE

Stephanie Schmitt-Grohe; Martin Uribe

2000-01-01

This paper compares the welfare costs of business cycles in a dollarized economy to those arising in economies with different monetary arrangements. The alternative monetary policy regimes studied belong to three broad families: devaluation rate rules, inflation targeting, and money growth rate rules. The analysis is conducted within an optimizing model of a small open economy with sticky prices. The model is calibrated to the Mexican economy and is driven by three external shocks: terms of t...

Cost-effectiveness of public-health policy options in the presence of pretreatment NNRTI drug resistance in sub-Saharan Africa

DEFF Research Database (Denmark)

Phillips, Andrew N; Cambiano, Valentina; Nakagawa, Fumiyo

2018-01-01

BACKGROUND: There is concern over increasing prevalence of non-nucleoside reverse-transcriptase inhibitor (NNRTI) resistance in people initiating antiretroviral therapy (ART) in low-income and middle-income countries. We assessed the effectiveness and cost-effectiveness of alternative public health...... sources and considers specific drugs and resistance mutations. We used this model to generate multiple setting scenarios mimicking those in sub-Saharan Africa and considered the prevalence of pretreatment NNRTI drug resistance in 2017. We then compared effectiveness and cost-effectiveness of alternative...... policy options. We took a 20 year time horizon, used a cost effectiveness threshold of US$500 per DALY averted, and discounted DALYs and costs at 3% per year. FINDINGS: A transition to use of a dolutegravir as a first-line regimen in all new ART initiators is the option predicted to produce the most...

Chapter 4. Economic Considerations: Cost-Effective and Efficient Climate Policies

Directory of Open Access Journals (Sweden)

Maximilian Auffhammer

2016-12-01

of incentive-based instruments, quantity-based mandates such as the federal Renewable Fuel Standard, California’s Low Carbon Fuel Standard, renewable portfolio standards, and the Clean Power Plan should be combined with a cost containment mechanism. The findings of Lade, Lin Lawell and Smith [5] suggest that pure quantity-based mechanisms leave policies susceptible to large increases in compliance costs, particularly in the presence of capacity or production constraints that are inherent in energy markets. Given the experiences with the federal RFS2 in 2013, anticipating and designing climate policies in a way that can contain compliance costs is imperative.  Our fifth recommendation is that for international leverage, we should develop a climate club backed by border tax adjustments to non-participants. University of California at Berkeley Professor Larry S. Karp has been proposing an agreement between the top 10 emitters as an alternative to the UN framework [6]. Without international leverage or cooperation, unilateral climate policies, such as California’s AB 32 or the American Clean Energy and Security Act, are not only unlikely to fully combat climate change, but can also have other detrimental effects such as the reduction of economic competitiveness and the possible displacement of jobs from the U.S. to countries without carbon pricing [7]. Our final, and main, recommendation is that, as University of California at Berkeley Professor Severin Borenstein points out, California should focus on solving the problem of 'global' climate change. The primary goal of California climate policy should be to invent and develop the technologies that can replace fossil fuels, allowing the poorer nations of the world – where most of the world’s population lives – to achieve low-carbon economic growth [8].

Agricultural price and income policy in the EC : alternative policies and their implications

NARCIS (Netherlands)

Meester, G.

1980-01-01

Alternative forms of income policy without direct supply control. Alternative forms of income policy with direct supply control: quota arrangements. The influence of EC policy on the world market prices of agricultural produce

Global warming and urban smog: The cost effectiveness of CAFE standards and alternative fuels

International Nuclear Information System (INIS)

Krupnick, A.J.; Walls, M.A.; Collins, C.T.

1992-01-01

This paper evaluates alternative transportation policies for reducing greenhouse gas emissions and ozone precursors. The net cost-effectiveness -- i.e., the cost per ton of greenhouse gas reduced, adjusted for ozone reduction benefits -- of substituting methanol, compressed natural gas (CNG), and reformulated gasoline for conventional gasoline is assessed and compared with the cost-effectiveness of raising the corporate average fuel economy (CAFE) standard to 38 miles per gallon. Computing this open-quotes netclose quotes cost-effectiveness is one way of measuring the joint environmental benefits that these alternatives provide. Greenhouse gas emissions are assessed over the entire fuel cycle and include not only carbon dioxide emissions, but also methane, carbon monoxide, and nitrous oxide emissions. In computing cost-effectiveness, we account for the so-called open-quotes rebound effectclose quotes -- the impact on vehicle-miles traveled of higher or lower fuel costs. CNG is found to be the most cost-effective of these alternatives, followed by increasing the CAFE standard, substituting methanol for gasoline, and substituting reformulated for conventional gasoline. Including the ozone reduction benefits does not change the rankings of the alternatives, but does make the alternative fuels look better relative to increasing the CAFE standard. Incorporating the rebound effect greatly changes the magnitude of the estimates but does not change the rankings of the alternatives. None of the alternatives look cost-effective should a carbon tax of $35 per ton be passes (the proposal in the Stark bill, H.R. 1086), and only CNG under optimistic assumptions looks cost-effective if a tax of $100 per ton of carbon is passed

Toward a national policy for managing low-level radioactive waste: key issues and recommendations

International Nuclear Information System (INIS)

Duerksen, C.J.; Mantell, M.; Thompson, G.P.

1981-06-01

The Conservation Foundation, a not-for-profit research and public education organization, asked individuals with diverse backgrounds and viewpoints to come together under Foundation leadership as a Dialogue Group on Low-Level Radioactive Waste Management. The group, including persons who represent waste generators, concerned citizens, state regulators, and environmentalists, met over an 18-month period to discuss issues crucial to the development of a national policy on low-level wastes. The Dialogue Group agreed that three principles, if accepted broadly, would form the basis of a sound national policy for managing low-level radioactive wastes: with proper implementation, technology exists to manage low-level waste safely; generators and their customers should pay disposal costs; and greater public involvement at all stages can improve the disposal system. These principles acted as polestars for the group as it worked toward a series of policy recommendations in four main areas: (1) cleaning up closed commercial sites; (2) remodeling a system for defining and classifying low-level radioactive waste; (3) siting new low-level waste disposal facilities; and (4) decommissioning, long-term care, and liability. This report presents an extensive discussion of these recommendations covering qualifications, limitations, and alternatives

Alternative ceramic circuit constructions for low cost, high reliability applications

International Nuclear Information System (INIS)

Modes, Ch.; O'Neil, M.

1997-01-01

The growth in the use of hybrid circuit technology has recently been challenged by recent advances in low cost laminate technology, as well as the continued integration of functions into IC's. Size reduction of hybrid 'packages' has turned out to be a means to extend the useful life of this technology. The suppliers of thick film materials technology have responded to this challenge by developing a number of technology options to reduce circuit size, increase density, and reduce overall cost, while maintaining or increasing reliability. This paper provides an overview of the processes that have been developed, and, in many cases are used widely to produce low cost, reliable microcircuits. Comparisons of each of these circuit fabrication processes are made with a discussion of advantages and disadvantages of each technology. (author)

Cost estimating for CERCLA remedial alternatives a unit cost methodology

International Nuclear Information System (INIS)

Brettin, R.W.; Carr, D.J.; Janke, R.J.

1995-06-01

The United States Environmental Protection Agency (EPA) Guidance for Conducting Remedial Investigations and Feasibility Studies Under CERCLA, Interim Final, dated October 1988 (EPA 1988) requires a detailed analysis be conducted of the most promising remedial alternatives against several evaluation criteria, including cost. To complete the detailed analysis, order-of-magnitude cost estimates (having an accuracy of +50 percent to -30 percent) must be developed for each remedial alternative. This paper presents a methodology for developing cost estimates of remedial alternatives comprised of various technology and process options with a wide range of estimated contaminated media quantities. In addition, the cost estimating methodology provides flexibility for incorporating revisions to remedial alternatives and achieves the desired range of accuracy. It is important to note that the cost estimating methodology presented here was developed as a concurrent path to the development of contaminated media quantity estimates. This methodology can be initiated before contaminated media quantities are estimated. As a result, this methodology is useful in developing cost estimates for use in screening and evaluating remedial technologies and process options. However, remedial alternative cost estimates cannot be prepared without the contaminated media quantity estimates. In the conduct of the feasibility study for Operable Unit 5 at the Fernald Environmental Management Project (FEMP), fourteen remedial alternatives were retained for detailed analysis. Each remedial alternative was composed of combinations of remedial technologies and processes which were earlier determined to be best suited for addressing the media-specific contaminants found at the FEMP site, and achieving desired remedial action objectives

Short-term global warming mitigation costs of fischer-tropsch diesel production and policy scenarios in Norway

Energy Technology Data Exchange (ETDEWEB)

Bright, Ryan M.; Stroemman, Anders Hammer

2010-07-01

Full text: Increasing the supply of advanced biofuels like synthetic diesel produced from woody biomass require attractive investment environments so that novel technologies are deployed and technological learning can lead to reduced production costs and accelerated market diffusion. Technology-specific biofuel policy designed to minimize perceived risk may encourage shortterm investment into those biofuels offering superior environmental benefits - particularly climate mitigation benefits - thereby leading to steeper learning curves and deeper greenhouse gas (GHG) emission cuts over the medium- and long-term horizon. We perform both a Life Cycle Assessment (LCA) and an economic analysis of Fischer-Tropsch diesel (FTD) produced from Norwegian forest biomass at an 'nth' commercial plant (a plant with the same technologies that have been employed in previous commercial plants). This is followed with a cost growth analysis in order to derive production costs likely to be borne by pioneer commercial plants in Norway in the short-term (2016). LCA results are used to calculate shortterm GHG mitigation costs. We then assess, through scenarios, how various policy measures and financial support mechanisms would reduce production costs for incentivizing short-term investment and expediting commercial deployment in Norway. Because 'top-down' or 'market pull' biofuel support policy like excise tax exemptions or carbon taxes do not directly encourage investment into specific biofuel technologies like wood-FTD in the short term, we choose to analyze three 'bottom-up' or 'market push' policy scenarios to assess their effects on reducing levelized unit production costs. These include a Capital Grant, a low-interest Loan Guarantee, a Corporate Tax Credit, and a Feedstock Credit scenario. Under the Capital Grant scenario, we assess the change in levelized production and thus GHG abatement costs when a 50% capital grant (TCI) is

How do high cost-sharing policies for physician care affect total care costs among people with chronic disease?

Science.gov (United States)

Xin, Haichang; Harman, Jeffrey S; Yang, Zhou

2014-01-01

This study examines whether high cost-sharing in physician care is associated with a differential impact on total care costs by health status. Total care includes physician care, emergency room (ER) visits and inpatient care. Since high cost-sharing policies can reduce needed care as well as unneeded care use, it raises the concern whether these policies are a good strategy for controlling costs among chronically ill patients. This study used the 2007 Medical Expenditure Panel Survey data with a cross-sectional study design. Difference in difference (DID), instrumental variable technique, two-part model, and bootstrap technique were employed to analyze cost data. Chronically ill individuals' probability of reducing any overall care costs was significantly less than healthier individuals (beta = 2.18, p = 0.04), while the integrated DID estimator from split results indicated that going from low cost-sharing to high cost-sharing significantly reduced costs by $12,853.23 more for sick people than for healthy people (95% CI: -$17,582.86, -$8,123.60). This greater cost reduction in total care among sick people likely resulted from greater cost reduction in physician care, and may have come at the expense of jeopardizing health outcomes by depriving patients of needed care. Thus, these policies would be inappropriate in the short run, and unlikely in the long run to control health plans costs among chronically ill individuals. A generous benefit design with low cost-sharing policies in physician care or primary care is recommended for both health plans and chronically ill individuals, to save costs and protect these enrollees' health status.

Psychosocial impact of alternative management policies for low-grade cervical abnormalities: results from the TOMBOLA randomised controlled trial.

Directory of Open Access Journals (Sweden)

Linda Sharp

Full Text Available Large numbers of women who participate in cervical screening require follow-up for minor cytological abnormalities. Little is known about the psychological consequences of alternative management policies for these women. We compared, over 30-months, psychosocial outcomes of two policies: cytological surveillance (repeat cervical cytology tests in primary care and a hospital-based colposcopy examination.Women attending for a routine cytology test within the UK NHS Cervical Screening Programmes were eligible to participate. 3399 women, aged 20-59 years, with low-grade abnormal cytology, were randomised to cytological surveillance (six-monthly tests; n = 1703 or initial colposcopy with biopsies and/or subsequent treatment based on colposcopic and histological findings (n = 1696. At 12, 18, 24 and 30-months post-recruitment, women completed the Hospital Anxiety and Depression Scale (HADS. A subgroup (n = 2354 completed the Impact of Event Scale (IES six weeks after the colposcopy episode or first surveillance cytology test. Primary outcomes were percentages over the entire follow-up period of significant depression (≥ 8 and significant anxiety (≥ 11; "30-month percentages". Secondary outcomes were point prevalences of significant depression, significant anxiety and procedure-related distress (≥ 9. Outcomes were compared between arms by calculating fully-adjusted odds ratios (ORs for initial colposcopy versus cytological surveillance.There was no significant difference in 30-month percentages of significant depression (OR = 0.99, 95% CI 0.80-1.21 or anxiety (OR = 0.97, 95% CI 0.81-1.16 between arms. At the six-week assessment, anxiety and distress, but not depression, were significantly less common in the initial colposcopy arm (anxiety: 7.9% vs 13.4%; OR = 0.55, 95% CI 0.38-0.81; distress: 30.6% vs 39.3%, OR = 0.67 95% CI 0.54-0.84. Neither anxiety nor depression differed between arms at subsequent time-points.There was no difference in the

Reflections on the cost of "low-cost" whole genome sequencing: framing the health policy debate.

Directory of Open Access Journals (Sweden)

Timothy Caulfield

2013-11-01

Full Text Available The cost of whole genome sequencing is dropping rapidly. There has been a great deal of enthusiasm about the potential for this technological advance to transform clinical care. Given the interest and significant investment in genomics, this seems an ideal time to consider what the evidence tells us about potential benefits and harms, particularly in the context of health care policy. The scale and pace of adoption of this powerful new technology should be driven by clinical need, clinical evidence, and a commitment to put patients at the centre of health care policy.

Social Cost Benefit Analysis for Environmental Policy-Making

International Nuclear Information System (INIS)

De Zeeuw, A.; In t Veld, R.; Van Soest, D.; Meuleman, L.; Hoogewoning, P.

2008-01-01

Review of the theoretical literature and the current debate on the valuation of environmental goods and services, on the discounting of future benefits and costs, and on how social cost benefit analysis (SCBAs) can be integrated in the policy and decision making process. It is concluded that SCBA can be a good decision support method in environmental policy-making if it is transparent and if all impacts are taken into account. Furthermore, the SCBA process should be participative, and politicians must be prepared to take responsibility for the assumptions behind the SCBA, including the assumptions on valuation and on the discount rate. Such a political role makes each SCBA a unique product of a politically responsible actor, and makes it possible for other stakeholders to have calculated an alternative SCBA based on their own assumptions. This Background Study also contains the proceedings of the international SCBA conference organised by RMNO on 16-17 January 2008

The availability and cost of healthier food alternatives.

Science.gov (United States)

Jetter, Karen M; Cassady, Diana L

2006-01-01

Many people, especially low-income consumers, do not successfully follow dietary recommendations to eat more whole grains and less fat and added sugar. The food environment may have a significant impact on the choice by low-income consumers to eat healthier foods, as both the availability and price of healthier food items may limit their ability to eat a healthier diet. We investigated the cost and availability of a standard market basket of foods, and a healthier basket that included low-fat meat and dairy and whole grain products. Market-basket surveys were conducted in 25 stores in Los Angeles and Sacramento. Stores were selected from neighborhoods that were varied by income and surveyed three times from September 2003 to June 2004. The average cost of a standard market basket (based on the U.S. Department of Agriculture's Thrifty Food Plan [TFP]) and a healthier market basket was calculated from these prices and compared using a standard t-test to determine if they were significantly different from each other. The analysis was conducted in 2005. In neighborhoods served by smaller grocery stores, access to whole-grain products, low-fat cheeses, and ground meat with cost was $194, and the healthier market-basket cost was $230. The average cost of the healthier market basket was more expensive by $36 due to higher costs of whole grains, lean ground beef, and skinless poultry. The higher cost of the healthier basket is equal to about 35% to 40% of low-income consumers' food budgets of $2410 a year. The lack of availability in small grocery stores located in low-income neighborhoods, and the higher cost of the healthier market basket may be a deterrent to eating healthier among very low-income consumers. Public policies should take the food environment into account in order to develop successful strategies to encourage the consumption of healthier foods.

Comparison of costs for alternative mixed low-level waste treatment systems

International Nuclear Information System (INIS)

Schwinkendorf, W.E.; Harvego, L.; Cooley, C.R.; Biagi, C.

1996-01-01

Total life cycle costs (TLCCs), including disposal costs, of thermal, nonthermal and enhanced nonthermal systems were evaluated to guide future research and development programs for the treatment of mixed low-level waste (MLLW) consisting of RCRA hazardous and low-level radioactive wastes. In these studies, nonthermal systems are defined as those systems that process waste at temperatures less than 350 C. Preconceptual designs and costs were developed for thirty systems with a capacity (2,927 lbs/hr) to treat the DOE MLLW stored inventor y(approximately 236 million pounds) in 20 years in a single, centralized facility. A limited comparison of the studies' results is presented in this paper. Sensitivity of treatment costs with respect to treatment capacity, number of treatment facilities, and system availability were also determined. The major cost element is operations and maintenance (O and M), which is 50 to 60% of the TLCC for both thermal and nonthermal systems. Energy costs constitute a small fraction (< 1%) of the TLCCs. Equipment cost is only 3 to 5% of the treatment cost. Evaluation of subsystem costs demonstrate that receiving and preparation is the highest cost subsystem at about 25 to 30% of the TLCC for both thermal and nonthermal systems. These studies found no cost incentives to use nonthermal or hybrid (combined nonthermal treatment with stabilization by vitrification) systems in place of thermal systems. However, there may be other incentives including fewer air emissions and less local objection to a treatment facility. Building multiple treatment facilities to treat the same total mass of waste as a single facility would increase the total treatment cost significantly, and improved system availability decreases unit treatment costs by 17% to 30%

Water Use in Enhanced Geothermal Systems (EGS): Geology of U.S. Stimulation Projects, Water Costs, and Alternative Water Source Policies

Energy Technology Data Exchange (ETDEWEB)

Harto, C. B. [Argonne National Lab. (ANL), Argonne, IL (United States); Schroeder, J. N. [Argonne National Lab. (ANL), Argonne, IL (United States); Horner, R. M. [Argonne National Lab. (ANL), Argonne, IL (United States); Patton, T. L. [Argonne National Lab. (ANL), Argonne, IL (United States); Durham, L. A. [Argonne National Lab. (ANL), Argonne, IL (United States); Murphy, D. J. [Argonne National Lab. (ANL), Argonne, IL (United States); Clark, C. E. [Argonne National Lab. (ANL), Argonne, IL (United States)

2014-10-01

According to the Energy Information Administration (EIA) of the U.S. Department of Energy (DOE), geothermal energy generation in the United States is projected to more than triple by 2040 (EIA 2013). This addition, which translates to more than 5 GW of generation capacity, is anticipated because of technological advances and an increase in available sources through the continued development of enhanced geothermal systems (EGSs) and low-temperature resources (EIA 2013). Studies have shown that air emissions, water consumption, and land use for geothermal electricity generation have less of an impact than traditional fossil fuel–based electricity generation; however, the long-term sustainability of geothermal power plants can be affected by insufficient replacement of aboveground or belowground operational fluid losses resulting from normal operations (Schroeder et al. 2014). Thus, access to water is therefore critical for increased deployment of EGS technologies and, therefore, growth of the geothermal sector. This paper examines water issues relating to EGS development from a variety of perspectives. It starts by exploring the relationship between EGS site geology, stimulation protocols, and below ground water loss, which is one of the largest drivers of water consumption for EGS projects. It then examines the relative costs of different potential traditional and alternative water sources for EGS. Finally it summarizes specific state policies relevant to the use of alternative water sources for EGS, and finally explores the relationship between EGS site geology, stimulation protocols, and below ground water loss, which is one of the largest drivers of water consumption for EGS projects.

Remote-Handled Low-Level Waste Disposal Project Alternatives Analysis

Energy Technology Data Exchange (ETDEWEB)

David Duncan

2011-04-01

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energy’s mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

Remote-Handled Low Level Waste Disposal Project Alternatives Analysis

Energy Technology Data Exchange (ETDEWEB)

David Duncan

2010-10-01

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energy’s mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

Remote-Handled Low-Level Waste Disposal Project Alternatives Analysis

Energy Technology Data Exchange (ETDEWEB)

David Duncan

2011-03-01

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energy’s mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

Remote-Handled Low-Level Waste Disposal Project Alternatives Analysis

Energy Technology Data Exchange (ETDEWEB)

David Duncan

2010-06-01

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energy’s mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

Consumer cost effectiveness of CO2 mitigation policies in restructured electricity markets

International Nuclear Information System (INIS)

Moore, Jared; Apt, Jay

2014-01-01

We examine the cost of carbon dioxide mitigation to consumers in restructured USA markets under two policy instruments, a carbon price and a renewable portfolio standard (RPS). To estimate the effect of policies on market clearing prices, we constructed hourly economic dispatch models of the generators in PJM and in ERCOT. We find that the cost effectiveness of policies for consumers is strongly dependent on the price of natural gas and on the characteristics of the generators in the dispatch stack. If gas prices are low (∼$4/MMBTU), a technology-agnostic, rational consumer seeking to minimize costs would prefer a carbon price over an RPS in both regions. Expensive gas (∼$7/MMBTU) requires a high carbon price to induce fuel switching and this leads to wealth transfers from consumers to low carbon producers. The RPS may be more cost effective for consumers because the added energy supply lowers market clearing prices and reduces CO 2 emissions. We find that both policies have consequences in capacity markets and that the RPS can be more cost effective than a carbon price under certain circumstances: continued excess supply of capacity, retention of nuclear generators, and high natural gas prices. (letter)

[Cost effectiveness of workplace smoking policies].

Science.gov (United States)

Raaijmakers, Tamara; van den Borne, Inge

2003-01-01

This study reviews the motivations of companies to set out a policy for controlling smoking, the economic benefits for the company resulting from such a policy and the costs, broken down by European Union countries. The literature on the costs of implementing a policy related to smoking at the workplace is reviewed. The main objective of policies related to smoking at the workplace is that of safeguarding employees from environmental tobacco smoke. Other reasons are cutting costs, improving the company image, and reducing absenteeism, occupational accidents, internal quarrels and extra costs due to cigarette smoking, protection against environmental tobacco smoke does not entail any higher costs for companies, and economic advantages are visible. The benefits are by far greater than the costs involved, particularly on a long-range basis, and seem to be greater when smoking at the workplace is completely prohibited and no smoking areas are set.

Cost-effective management alternatives for Snake River Chinook salmon: a biological-economic synthesis.

Science.gov (United States)

Halsing, David L; Moore, Michael R

2008-04-01

The mandate to increase endangered salmon populations in the Columbia River Basin of North America has created a complex, controversial resource-management issue. We constructed an integrated assessment model as a tool for analyzing biological-economic trade-offs in recovery of Snake River spring- and summer-run chinook salmon (Oncorhynchus tshawytscha). We merged 3 frameworks: a salmon-passage model to predict migration and survival of smolts; an age-structured matrix model to predict long-term population growth rates of salmon stocks; and a cost-effectiveness analysis to determine a set of least-cost management alternatives for achieving particular population growth rates. We assessed 6 individual salmon-management measures and 76 management alternatives composed of one or more measures. To reflect uncertainty, results were derived for different assumptions of effectiveness of smolt transport around dams. Removal of an estuarine predator, the Caspian Tern (Sterna caspia), was cost-effective and generally increased long-term population growth rates regardless of transport effectiveness. Elimination of adult salmon harvest had a similar effect over a range of its cost estimates. The specific management alternatives in the cost-effective set depended on assumptions about transport effectiveness. On the basis of recent estimates of smolt transport effectiveness, alternatives that discontinued transportation or breached dams were prevalent in the cost-effective set, whereas alternatives that maximized transportation dominated if transport effectiveness was relatively high. More generally, the analysis eliminated 80-90% of management alternatives from the cost-effective set. Application of our results to salmon management is limited by data availability and model assumptions, but these limitations can help guide research that addresses critical uncertainties and information. Our results thus demonstrate that linking biology and economics through integrated models can

Organizing for low cost space operations - Status and plans

Science.gov (United States)

Lee, C.

1976-01-01

Design features of the Space Transportation System (vehicle reuse, low cost expendable components, simple payload interfaces, standard support systems) must be matched by economical operational methods to achieve low operating and payload costs. Users will be responsible for their own payloads and will be charged according to the services they require. Efficient use of manpower, simple documentation, simplified test, checkout, and flight planning are firm goals, together with flexibility for quick response to varying user needs. Status of the Shuttle hardware, plans for establishing low cost procedures, and the policy for user charges are discussed.

The Effect of ASEAN Open Skies Policy 2015 Upon Opportunities for Low-Cost Carriers in Indonesia – A Case Study of PT. Citilink

Directory of Open Access Journals (Sweden)

Sri Nurhendiarni

2015-06-01

Full Text Available The ASEAN Open Skies agreement is included in the ASEAN Economic Community’s blueprint and will be implemented in 2015. This study is intended to assist Citilink - an Indonesian low-cost carrier airline - in measuring its level of awareness and analyzing its SWOT towards the ASEAN Open Skies Policy 2015. This descriptive study utilizes quantitative and qualitative approaches and collected data from both primary and secondary sources. Questionnaires were distributed to Citilink Staff and analyzed using IBM SPSS and SPSS Amos. The awareness level of Citilink staff towards the ASEAN Open Skies Policy turned out to be high and the knowledge factor significantly influenced the awareness level. The study identified both benefits and drawbacks to the implementation of the ASEAN Open Skies Policy; however, Citilink already holds a good position as an Indonesian low-cost carrier and must pursue an aggressive strategy to maximize opportunities so that it can compete successfully at the regional level.    

THE EFFECT OF ASEAN OPEN SKIES POLICY 2015 UPON OPPORTUNITIES FOR LOW-COST CARRIERS IN INDONESIA – A CASE STUDY OF PT.CITILINK

Directory of Open Access Journals (Sweden)

Sri Nurhendiarni

2015-04-01

Full Text Available The ASEAN Open Skies agreement is included in the ASEAN Economic Community’s blueprint and will be implemented in 2015. This study is intended to assist Citilink - an Indonesian low-cost carrier airline - in measuring its level of awareness and analyzing its SWOT towards the ASEAN Open Skies Policy 2015. This descriptive study utilizes quantitative and qualitative approaches and collected data from both primary and secondary sources. Questionnaires were distributed to Citilink Staff and analyzed using IBM SPSS and SPSS Amos. The awareness level of Citilink staff towards the ASEAN Open Skies Policy turned out to be high and the knowledge factor significantly influenced the awareness level. The study identified both benefits and drawbacks to the implementation of the ASEAN Open Skies Policy; however, Citilink already holds a good position as an Indonesian low-cost carrier and must pursue an aggressive strategy to maximize opportunities so that it can compete successfully at the regional level.

A study on the alternative option for nuclear policy

International Nuclear Information System (INIS)

Choi, J. W.; Choi, H. J.; Lee, J. Y.; Cho, D. K.; Jeon, K. S.; Park, S. W.; Hahn, D. H.; Yoon, J. S.; Lee, K. S.

2008-02-01

Since a decision-making by intuitive judgement under uncertain future conditions can not select an optimum alternative, reaching an agreement for alternatives between experts requires a development of several scientific opinion collection methodologies and performing these methodologies. Therefore, opinion collection for all points related to the nuclear energy, public hearing induction related researches and the acts, procedure, etc. performed in developed countries such as U.S, U.K, France, etc. are reviewed and analyzed in this research. And after the analysis of domestic spent nuclear fuel management plan, Task Force Team composed of experts in several related areas is organized to suggest strategies and directions which are necessary for making a national policy. Beside, Task Force Team selects an optimum technical alternative by the analysis and comparison in depth between these technical alternatives to establish the policy direction. They also established the procedures such as opinion collecting, etc. through policy conference and forum and suggested the technical data related nuclear policy which supports the nuclear policy conference. Results from this research are expected to decrease the trial and error that has been occurred in the present policy-making procedure such as radioactive waste repository related procedure and contribute for socio-cultural stability. Moreover, opinion collection plan for developing a nuclear policy alternative is expected to contribute for making a nuclear policy in the nuclear policy conference so that the nuclear technology will be enhanced more

A study on the alternative option for nuclear policy

Energy Technology Data Exchange (ETDEWEB)

Choi, J. W.; Choi, H. J.; Lee, J. Y.; Cho, D. K.; Jeon, K. S.; Park, S. W.; Hahn, D. H.; Yoon, J. S.; Lee, K. S. [KAERI, Daejeon (Korea, Republic of)

2008-02-15

Since a decision-making by intuitive judgement under uncertain future conditions can not select an optimum alternative, reaching an agreement for alternatives between experts requires a development of several scientific opinion collection methodologies and performing these methodologies. Therefore, opinion collection for all points related to the nuclear energy, public hearing induction related researches and the acts, procedure, etc. performed in developed countries such as U.S, U.K, France, etc. are reviewed and analyzed in this research. And after the analysis of domestic spent nuclear fuel management plan, Task Force Team composed of experts in several related areas is organized to suggest strategies and directions which are necessary for making a national policy. Beside, Task Force Team selects an optimum technical alternative by the analysis and comparison in depth between these technical alternatives to establish the policy direction. They also established the procedures such as opinion collecting, etc. through policy conference and forum and suggested the technical data related nuclear policy which supports the nuclear policy conference. Results from this research are expected to decrease the trial and error that has been occurred in the present policy-making procedure such as radioactive waste repository related procedure and contribute for socio-cultural stability. Moreover, opinion collection plan for developing a nuclear policy alternative is expected to contribute for making a nuclear policy in the nuclear policy conference so that the nuclear technology will be enhanced more.

Use and costs of prescription medications and alternative treatments in patients with osteoarthritis and chronic low back pain in community-based settings.

Science.gov (United States)

Gore, Mugdha; Tai, Kei-Sing; Sadosky, Alesia; Leslie, Douglas; Stacey, Brett R

2012-09-01

To evaluate the use and direct medical costs of pharmacologic and alternative treatments for patients with osteoarthritis (OA) and chronic low back pain (CLBP). The LifeLink™ Health Plan Claims Database was used to identify patients ≥18 years old, diagnosed with OA (N = 112,951) or CLBP (N = 101,294). Of these patients, 64,085 with OA and 47,386 with CLBP received pain-related treatments during CY2008 and were selected for inclusion. For patients in both cohorts, pharmacologic and alternative treatments, and direct medical costs were examined during CY2008. Opioids were the most frequently prescribed medication (>70%) in both groups, followed by nonselective nonsteroidal anti-inflammatory drugs (>50%). Over 30% received antidepressants, >20% received benzodiazepines, and 15% in each group received sedative hypnotics. Use of alternative treatments was as follows: chiropractor, OA 11%, CLBP 34%; physical therapy, 20% in both groups; transcutaneous electrical nerve stimulations (TENS), OA 14%, CLBP 22%; acupuncture, hydrotherapy, massage therapy, and biofeedback, patients were, OA: $15,638 ($22,595); CLBP: $11,829 ($20,035). Pharmacologic therapies accounted for approximately 20% of these costs, whereas alternative treatments accounted for only 3% to 4% of the total costs. Patients with OA and CLBP used a variety of pain-related and adjunctive medications. Although, alternative treatments are widely recommended, we found limited use of several of these in clinical practice, potentially due to the source of our data (commercial claims). Further research is needed to ascertain the extent to which such therapies contribute to the total costs of OA and CLBP management. © 2012 The Authors. Pain Practice © 2012 World Institute of Pain.

Transportation Energy Futures Series: Alternative Fuel Infrastructure Expansion: Costs, Resources, Production Capacity, and Retail Availability for Low-Carbon Scenarios

Energy Technology Data Exchange (ETDEWEB)

Melaina, W. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Heath, Garvin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sandor, Debra [National Renewable Energy Lab. (NREL), Golden, CO (United States); Steward, Darlene [National Renewable Energy Lab. (NREL), Golden, CO (United States); Vimmerstedt, Laura [National Renewable Energy Lab. (NREL), Golden, CO (United States); Warner, Ethan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Webster, Karen W. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2013-04-01

The petroleum-based transportation fuel system is complex and highly developed, in contrast to the nascent low-petroleum, low-carbon alternative fuel system. This report examines how expansion of the low-carbon transportation fuel infrastructure could contribute to deep reductions in petroleum use and greenhouse gas (GHG) emissions across the U.S. transportation sector. Three low-carbon scenarios, each using a different combination of low-carbon fuels, were developed to explore infrastructure expansion trends consistent with a study goal of reducing transportation sector GHG emissions to 80% less than 2005 levels by 2050.These scenarios were compared to a business-as-usual (BAU) scenario and were evaluated with respect to four criteria: fuel cost estimates, resource availability, fuel production capacity expansion, and retail infrastructure expansion.

Comparison of auctions and alternative policy options for RES-E support

DEFF Research Database (Denmark)

Kitzing, Lena; Islam, Marco; Fitch-Roy, Oscar

2016-01-01

benefits of RES, there may be valid reasons for policy makers not to employ auctions, since under particular circumstances it may be desirable not to control quantities but the price. As such, they raise the question whether pure support cost minimisation should be the only goal when implementing......This report concludes the work carried out in the course of Task 6.2 of the AURES project. It is its aim to compare auctions with alternative policy instruments and in particular, to examine under which circumstances auctions may be superior and inferior to achieve intended policy targets....... For that purpose, we identify a number of potential drivers that might affect an instrument’s effectiveness, its efficiency and further success criteria. Among this list of relevant drivers, the basis for our analysis is the factor risk, where our core focus is on risk for policy makers. Assuming a world...

Cost-effectiveness of policies aimed at increasing organ donation: the case of Chile.

Science.gov (United States)

Domínguez, J; Harrison, R; Atal, R; Larraín, L

2013-01-01

In this article we present an economic evaluation of policies aimed at increasing deceased organ donation in Chile, a developing country that has low donation rates; it had 5.4 donors per million people (pmp) in 2010. Expert opinions of leading participants in donation and transplantation were analyzed, resulting in a set of local policies aimed at increasing donation rates. Using previous results of reported cost savings of increasing kidney transplantation in Chile, we estimated the net benefits of these policies, as a function of additional donors. The main problem of the Chilean system seems to be the low capability to identify potential donors and a deficit in intensive care unit (ICU) beds. Among considered policies central to increase donation are the following: increasing human and capital resources dedicated to identifying potential donors, providing ICU beds from private centers, and developing an online information system that facilitates procurement coordination and the evaluation of performance at each hospital. Our results show that there is a linear relationship between cost savings and incremental donors pmp. For example, if these policies are capable of elevating donation rates in Chile by 6 donors pmp net estimated cost savings are approximately US $1.9 million. Likewise, considering the effect on patients' quality of life, savings would amount to around $15.0 million dollars per year. Our estimates suggest that these policies have a large cost-saving potential. In fact, considering implementation costs, cost reduction is positive after 4 additional donors pmp, and increasing afterward. Copyright © 2013 Elsevier Inc. All rights reserved.

Innovations in Arizona's Accountability Policies and Frameworks for Alternative Schools

Science.gov (United States)

Schlessman, Amy

2014-01-01

This study presents Arizona's innovations in academic accountability policy and academic accountability frameworks for alternative schools. A timeline of statutes and regulations including the State Board of Education approved alternative school definition provides Arizona's context for alternative school accountability policy and frameworks.…

Sectoral Costs of Environmental Policy. Final Report

International Nuclear Information System (INIS)

Vercaemst, P.; Vanassche, S.; Campling, P.; Vranken, L.; Agnolucci, P.; Salmons, R.; Shaw, B.; Jantzen, J.; Van der Woerd, H.; Gruenig, M.; Best, A.

2007-12-01

The Directorate General for Environment of the European Commission has launched a study on the 'Sectoral costs of environmental policy'. The overall aim of the study is to obtain a clearer picture of the impact of environmental policy in some of the industrial sectors most affected by environmental policy, taking into account the differences between sectors and Member States. Previous studies mainly focussed on the individual impact of one Directive, but in this study we will assess the cumulative costs attributable to the environmental policy in its entirety and attempt to identify synergies between individual policies. The project has the following main objectives: paint a clearer picture of the environmental costs for the selected industries; indicate the differences in costs between individual companies; indicate the differences in costs between Member States; demonstrate the drivers for environmental expenditures of the companies and differences between sectors and Member States; describe different types of environmental regulation (policy instruments) and their impact on environmental expenditures; evaluate the environmental performance of the industries and differences between companies/Member States; collect evidence for the impacts of environmental regulation (and associated costs) on the competitiveness of companies; and carry out an international comparison. The sectors selected are:oil supply chain; electricity production; steel industry; and textile and leather industry

An alternative sensor fusion method for object orientation using low-cost MEMS inertial sensors

Science.gov (United States)

Bouffard, Joshua L.

This thesis develops an alternative sensor fusion approach for object orientation using low-cost MEMS inertial sensors. The alternative approach focuses on the unique challenges of small UAVs. Such challenges include the vibrational induced noise onto the accelerometer and bias offset errors of the rate gyroscope. To overcome these challenges, a sensor fusion algorithm combines the measured data from the accelerometer and rate gyroscope to achieve a single output free from vibrational noise and bias offset errors. One of the most prevalent sensor fusion algorithms used for orientation estimation is the Extended Kalman filter (EKF). The EKF filter performs the fusion process by first creating the process model using the nonlinear equations of motion and then establishing a measurement model. With the process and measurement models established, the filter operates by propagating the mean and covariance of the states through time. The success of EKF relies on the ability to establish a representative process and measurement model of the system. In most applications, the EKF measurement model utilizes the accelerometer and GPS-derived accelerations to determine an estimate of the orientation. However, if the GPS-derived accelerations are not available then the measurement model becomes less reliable when subjected to harsh vibrational environments. This situation led to the alternative approach, which focuses on the correlation between the rate gyroscope and accelerometer-derived angle. The correlation between the two sensors then determines how much the algorithm will use one sensor over the other. The result is a measurement that does not suffer from the vibrational noise or from bias offset errors.

Alternative Fuels Market and Policy Trends (Presentation)

Energy Technology Data Exchange (ETDEWEB)

Schroeder, A. N.

2013-09-01

Market forces and policies are increasing opportunities for alternative fuels. There is no one-size-fits-all, catch-all, silver-bullet fuel. States play a critical role in the alternative fuel market and are taking a leading role.

Benefit-cost-risk analysis of alternatives for greater-confinement disposal of radioactive waste

International Nuclear Information System (INIS)

Gilbert, T.L.; Luner, C.; Peterson, J.M.

1983-01-01

Seven alternatives are included in the analysis: near-surface disposal; improved waste form; below-ground engineered structure; augered shaft; shale fracturing; shallow geologic repository; and high-level waste repository. These alternatives are representative generic facilities that span the range from low-level waste disposal practice to high-level waste disposal practice, tentatively ordered according to an expected increasing cost and/or effectiveness of confinement. They have been chosen to enable an assessment of the degree of confinement that represents an appropriate balance between public health and safety requirements and costs rather than identification of a specific preferred facility design. The objective of the analysis is to provide a comparative ranking of the alternatives on the basis of benefit-cost-risk considerations

California's greenhouse gas law, Assembly Bill 1493: Deficiencies, alternatives, and implications for regulatory climate policy

International Nuclear Information System (INIS)

Johnson, Kenneth C.

2007-01-01

California's Air Resources Board has finalized regulations implementing Assembly Bill (AB) 1493, which requires 'maximum feasible and cost-effective reduction of greenhouse gas emissions from motor vehicles'. By 2030, when California's light-duty vehicle stock has been substantially replaced by regulation-compliant vehicles, total emissions from regulated vehicles are projected to be reduced by 27% relative to 'business-as-usual', but are nevertheless expected to be 8.7% higher than 2004 emissions. If an 8.7% increase truly represents the 'maximum feasible and cost-effective' emissions reduction from transportation vehicles, then global climate stabilization clearly will not be attained within limits of 'feasibility' and 'cost-effectiveness', and climate sustainability will only be achievable through severely draconian measures. On the other hand, if significantly greater emissions reduction would be feasible and cost-effective, then the AB 1493 regulations fail to satisfy the legislative policy mandate and the task is to find a regulatory mechanism that will. The thesis of this paper is that the regulations do not satisfy the mandate for several reasons, the most important being the conflicting policy objectives of the 'cost-constrained' legislative mandate and the 'quantity-constrained', standard-based regulatory instrument. An alternative policy instrument that would better fit legislative policy and environmental objectives would be a feebate-type system (although not necessarily a conventional vehicle feebate)

An Assessment Of The Life Cycle Costs And GHG Emissions For Alternative Generation Technologies

Energy Technology Data Exchange (ETDEWEB)

Donnelly, C. Richard; Carias, Anibal; Ali, Mohammad; Wood, Nicholas; Morgenroth, Michael; Bridgeman, Andrew

2010-09-15

The best choices for supplying energy in a manner that can reduce emissions at a reasonable cost while still ensuring grid stability and reliability of supply is a matter of some debate. In this paper, a first principles analysis is performed to look at life-cycle costs and emissions as well as the amount of energy that is provided to the system from various low-emission alternatives, including wind, water, solar and nuclear power. These low-emission sources are then benchmarked against coal-fired energy production to establish a normalized assessment of the clean energy alternatives currently available.

Decision support tool to evaluate alternative policies regulating wind integration into autonomous energy systems

International Nuclear Information System (INIS)

Zouros, N.; Contaxis, G.C.; Kabouris, J.

2005-01-01

Integration of wind power into autonomous electricity systems strongly depends on the specific technical characteristics of these systems; the regulations applied should take into account physical system constraints. Introduction of market rules makes the issue even more complicated since the interests of the market participants often conflict each other. In this paper, an integrated tool for the comparative assessment of alternative regulatory policies is presented along with a methodology for decision-making, based on alternative scenarios analysis. The social welfare concept is followed instead of the traditional Least Cost Planning

Climate-based policies may increase life-cycle social costs of vehicle fleet operation

International Nuclear Information System (INIS)

Emery, Isaac; Mbonimpa, Eric; Thal, Alfred E.

2017-01-01

Sustainability guidelines and regulations in the United States often focus exclusively on carbon or petroleum reductions. Though some of these policies have resulted in substantial progress toward their goals, the effects of these efforts on other social and environmental externalities are often ignored. In this study, we examine the life-cycle air pollutant emissions for alternative fuel and vehicle purchase scenarios at a military installation near a typical urban area in the United States (U.S.). We find that scenarios which minimize petroleum use or greenhouse gas emissions do not concomitantly minimize criteria air pollutant emissions. We also employ social cost methodologies to quantify economic externalities due to climate change and health-related air pollutant impacts. Accounting for the social costs of climate change and air pollution from vehicle use reveals that criteria air pollutants may have a greater total impact than greenhouse gas emissions in locations similar to the urban area examined in this study. Use of first-generation biofuels, particularly corn grain ethanol, may reduce net petroleum use at the cost of increased total health impacts. More comprehensive policies may be needed to ensure that sustainability policies result in a net benefit to society. - Highlights: • U.S. energy and transportation policies focus on petroleum use and greenhouse gases. • Use of corn ethanol at a military base in Ohio, U.S. increases total social costs vs. gasoline. • Renewable electricity provides cost-effective climate and health protection. • DOD strategy to improve energy security may damage Americans' health. • More inclusive policies needed to protect health and climate.

Conference on alternatives for pollution control from coal-fired low emission sources, Plzen, Czech Republic. Plzen Proceedings

Energy Technology Data Exchange (ETDEWEB)

1994-07-01

The Conference on Alternatives for Pollution Control from Coal-Fired Emission Sources presented cost-effective approaches for pollution control of low emission sources (LES). It also identified policies and strategies for implementation of pollution control measures at the local level. Plzen, Czech Republic, was chosen as the conference site to show participants first hand the LES problems facing Eastern Europe today. Collectively, these Proceedings contain clear reports on: (a) methods for evaluating the cost effectiveness of alternative approaches to control pollution from small coal-fired boilers and furnaces; (b) cost-effective technologies for controlling pollution from coal-fired boilers and furnaces; (c) case studies of assessment of cost effective pollution control measures for selected cities in eastern Europe; and (d) approaches for actually implementing pollution control measures in cities in Eastern Europe. It is intended that the eastern/central European reader will find in these Proceedings useful measures that can be applied to control emissions and clean the air in his city or region. The conference was sponsored by the United States Agency for International Development (AID), the United States Department of Energy (DOE), and the Czech Ministry of Industry and Trade. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

Buying Health: The Costs of Commercialization and an Alternative Philosophy

Directory of Open Access Journals (Sweden)

Larry Churchill

2013-01-01

Full Text Available This paper argues that commercial forces have steadily encroached into our understanding of medicine and health in modern industrial societies. The impact on the delivery of personal medical services and on common ideas about food and nutrition is profound and largely deleterious to public health. A key component of commercialization is reductionism of medical services, health products and nutritional components into small, marketable units. This reductive force makes both medical services and nutritional components more costly and is corrosive to more holistic concepts of health. We compare commercial and holistic approaches to nutrition in detail and offer an alternative philosophy. Adopting this alternative will require sound public policies that rely less on marketing as a distribution system and that enfranchise individuals to be reflective on their use of medical services, their food and nutrition choices, and their larger health needs.

Economic analysis of three interventions of different intensity in improving school implementation of a government healthy canteen policy in Australia: costs, incremental and relative cost effectiveness.

Science.gov (United States)

Reilly, Kathryn L; Reeves, Penny; Deeming, Simon; Yoong, Sze Lin; Wolfenden, Luke; Nathan, Nicole; Wiggers, John

2018-03-20

No evaluations of the cost or cost effectiveness of interventions to increase school implementation of food availability policies have been reported. Government and non-government agency decisions regarding the extent of investment required to enhance school implementation of such policies are unsupported by such evidence. This study sought to i) Determine cost and cost-effectiveness of three interventions in improving school implementation of an Australian government healthy canteen policy and; ii) Determine the relative cost-effectiveness of the interventions in improving school implementation of such a policy. An analysis of the cost and cost-effectiveness of three implementation interventions of varying support intensity, relative to usual implementation support conducted during 2013-2015 was undertaken. Secondly, an indirect comparison of the trials was undertaken to determine the most cost-effective of the three strategies. The economic analysis was based on the cost of delivering the interventions by health service delivery staff to increase the proportion of schools 'adherent' with the policy. The total costs per school were $166,971, $70,926 and $75,682 for the high, medium and low intensity interventions respectively. Compared to usual support, the cost effectiveness ratios for each of the three interventions were: A$2982 (high intensity), A$2627 (medium intensity) and A$4730 (low intensity) per percent increase in proportion of schools reporting 'adherence'). Indirect comparison between the 'high' and 'medium intensity' interventions showed no statistically significant difference in cost-effectiveness. The results indicate that while the cost profiles of the interventions varied substantially, the cost-effectiveness did not. This result is valuable to policy makers seeking cost-effective solutions that can be delivered within budget.

Innovative Feed-In Tariff Designs that Limit Policy Costs

Energy Technology Data Exchange (ETDEWEB)

Kreycik, C.; Couture, T. D.; Cory, K. S.

2011-06-01

Feed-in tariffs (FITs) are the most prevalent renewable energy policy used globally to date, and there are many benefits to the certainty offered in the marketplace to reduce development risks and associated financing costs and to grow the renewable energy industry. However, concerns over escalating costs in jurisdictions with FIT policies have led to increased attention on cost control in renewable energy policy design. In recent years, policy mechanisms for containing FIT costs have become more refined, allowing policymakers to exert greater control on policy outcomes and on the resulting costs to ratepayers. As policymakers and regulators in the United States begin to explore the use of FITs, careful consideration must be given to the ways in which policy design can be used to balance the policies' advantages while bounding its costs. This report explores mechanisms that policymakers have implemented to limit FIT policy costs. If designed clearly and transparently, such mechanisms can align policymaker and market expectations for project deployment. Three different policy tools are evaluated: (1) caps, (2) payment level adjustment mechanisms, and (3) auction-based designs. The report employs case studies to explore the strengths and weaknesses of these three cost containment tools. These tools are then evaluated with a set of criteria including predictability for policymakers and the marketplace and the potential for unintended consequences.

Multiple drug cost containment policies in Michigan's Medicaid program saved money overall, although some increased costs.

Science.gov (United States)

Kibicho, Jennifer; Pinkerton, Steven D

2012-04-01

Michigan's Medicaid program implemented four cost containment policies--preferred drug lists, joint and multistate purchasing arrangements, and maximum allowable cost--during 2002-04. The goal was to control growth of drug spending for beneficiaries who were enrolled in both Medicaid and Medicare and taking antihypertensive or antihyperlipidemic prescription drugs. We analyzed the impact of each policy while holding the effect of all other policies constant. Preferred drug lists increased both preferred and generic drugs' market share and reduced daily cost--the cost per day for each prescription provided to a beneficiary. In contrast, the maximum allowable cost policy increased daily cost and was the only policy that did not generate cost savings. The joint and multistate arrangements did not affect daily cost. Despite these policy trade-offs, the cumulative effect was a 10 percent decrease in daily cost and a total cost savings of $46,195 per year. Our findings suggest that policy makers need to evaluate the impact of multiple policies aimed at restraining drug spending, and further evaluate the policy trade-offs, to ensure that scarce public dollars achieve the greatest return for money spent.

Renewable deployment in India: Financing costs and implications for policy

International Nuclear Information System (INIS)

Shrimali, Gireesh; Nelson, David; Goel, Shobhit; Konda, Charith; Kumar, Raj

2013-01-01

India′s ambitious goals for renewable energy raise many questions regarding the nature of investment required. We conduct financial modeling of actual renewable projects in India; and derive the following insights. First, the high cost of debt is the most pressing problem: higher cost and inferior terms of debt in India may raise the cost of renewable energy by 24–32% compared to the U.S. Second, even if cost of debt goes down, loan terms – including short tenors and variable interest rates – will become significant impediments, given that they add 13–14% to the cost of renewable energy in India compared to the U.S. Finally, due to the high cost of debt, policy lessons from the U.S. and Europe; which focus on finer instruments such as duration of revenue-support, revenue-certainty, investor-risk-perception, and completion/cost-certainty; are not likely to be as effective, with potential impacts on the cost of renewable energy in the 3–11% range. In fact, we find that an interest-rate subsidy, which reduces the cost of debt, reduces the overall subsidy burden by 13–16%. This suggests that Indian policymakers need to prioritize the provision of low-cost, long-term debt and take a closer look at the successful efforts by China and Brazil. -- Highlights: •We examine impact of policy on financing costs of renewables in India. •The high cost of debt – the most pressing problem – adds about 24–32% to the cost. •An interest rate subsidy can actually reduce the overall subsidy burden by 13–16%. •Loan terms – debt tenor and variable rate debt – add about 13–14% to the cost. •Finer policy instruments are not as effective, given that they add 3–11% to the cost

Optimal climate policy is a utopia. From quantitative to qualitative cost-benefit analysis

International Nuclear Information System (INIS)

Van den Bergh, Jeroen C.J.M.

2004-01-01

The dominance of quantitative cost-benefit analysis (CBA) and optimality concepts in the economic analysis of climate policy is criticised. Among others, it is argued to be based in a misplaced interpretation of policy for a complex climate-economy system as being analogous to individual inter-temporal welfare optimisation. The transfer of quantitative CBA and optimality concepts reflects an overly ambitious approach that does more harm than good. An alternative approach is to focus the attention on extreme events, structural change and complexity. It is argued that a qualitative rather than a quantitative CBA that takes account of these aspects can support the adoption of a minimax regret approach or precautionary principle in climate policy. This means: implement stringent GHG reduction policies as soon as possible

An Alternative Methodological Approach for Cost-Effectiveness Analysis and Decision Making in Genomic Medicine.

Science.gov (United States)

Fragoulakis, Vasilios; Mitropoulou, Christina; van Schaik, Ron H; Maniadakis, Nikolaos; Patrinos, George P

2016-05-01

Genomic Medicine aims to improve therapeutic interventions and diagnostics, the quality of life of patients, but also to rationalize healthcare costs. To reach this goal, careful assessment and identification of evidence gaps for public health genomics priorities are required so that a more efficient healthcare environment is created. Here, we propose a public health genomics-driven approach to adjust the classical healthcare decision making process with an alternative methodological approach of cost-effectiveness analysis, which is particularly helpful for genomic medicine interventions. By combining classical cost-effectiveness analysis with budget constraints, social preferences, and patient ethics, we demonstrate the application of this model, the Genome Economics Model (GEM), based on a previously reported genome-guided intervention from a developing country environment. The model and the attendant rationale provide a practical guide by which all major healthcare stakeholders could ensure the sustainability of funding for genome-guided interventions, their adoption and coverage by health insurance funds, and prioritization of Genomic Medicine research, development, and innovation, given the restriction of budgets, particularly in developing countries and low-income healthcare settings in developed countries. The implications of the GEM for the policy makers interested in Genomic Medicine and new health technology and innovation assessment are also discussed.

A low-cost vaporization-atomization system for atomic absorption spectrometry

International Nuclear Information System (INIS)

Bruhn F, C.G.; Ambiado V, F.; Woerner V, R.

1990-01-01

A low-cost vaporization-atomization system for atomic absorption spectrometry is developed as an alternative to the use of a graphite furnace in electrothermal atomic absorption spectrometry. (Author)

Low-Budget Computer Programming in Your School (An Alternative to the Cost of Large Computers). Illinois Series on Educational Applications of Computers. No. 14.

Science.gov (United States)

Dennis, J. Richard; Thomson, David

This paper is concerned with a low cost alternative for providing computer experience to secondary school students. The brief discussion covers the programmable calculator and its relevance for teaching the concepts and the rudiments of computer programming and for computer problem solving. A list of twenty-five programming activities related to…

Strategies for cost-effective carbon reductions: A sensitivity analysis of alternative scenarios

International Nuclear Information System (INIS)

Gumerman, Etan; Koomey, Jonathan G.; Brown, Marilyn

2001-01-01

Analyses of alternative futures often present results for a limited set of scenarios, with little if any sensitivity analysis to identify the factors affecting the scenario results. This approach creates an artificial impression of certainty associated with the scenarios considered, and inhibits understanding of the underlying forces. This paper summarizes the economic and carbon savings sensitivity analysis completed for the Scenarios for a Clean Energy Future study (IWG, 2000). Its 19 sensitivity cases provide insight into the costs and carbon-reduction impacts of a carbon permit trading system, demand-side efficiency programs, and supply-side policies. Impacts under different natural gas and oil price trajectories are also examined. The results provide compelling evidence that policy opportunities exist to reduce carbon emissions and save society money

Alternative policy study. Environment and energy in Europe and Central Asia 1990-2010. Energy-related environmental impacts of policy scenarios. GEO 2000 alternative policy study

International Nuclear Information System (INIS)

Van Vuuren, D.P.; Bakkes, J.A.

2000-01-01

The GEO-2000 study into alternative policy options for Europe and Central Asia focuses on energy use as an important driver for environmental problems across the region. The problems analyzed are climate change, acidification, summer smog, urban air pollution and risks of reactor accidents associated with nuclear power generation. The analysis includes the effects on biodiversity and population health. It considers the question of what can be achieved by moderate measures, and whether this will be enough. Similar Geo-2000 region-specific studies on alternative policies have been compiled other world regions. This report outliners the general methodology for these reports

Finding costs methodology - alternative approaches

International Nuclear Information System (INIS)

Gaddis, D.

1992-01-01

Though the context may vary, the topic of the day in the oil and gas industry is ''finding costs per barrel.'' First, there have been numerous articles in both the popular media and the industry press that have argued it is cheaper for companies to buy reserves that find them with the drill bit. Financial analysts have emphasized the importance of comparing relative finding costs when evaluating different companies. The success of failure of a company's management has been judged on the basis of finding costs. In discussing oil and gas prices, economists commonly refer to the relationship between the market prices of oil and gas and their finding costs, and no discussion of the U.S. petroleum industry and the development of a national energy policy is complete without reference to finding costs. (Author)

impacts of alternative farm policies on rural communities

Science.gov (United States)

J. Michael Bowker; James W. Richardson

1989-01-01

The purpose of this study was to describe an LP/IO model for evaluating the economic impacts of alternative farm policies on rural communities and demonstrate its capabilities by analyzing the impacts of three farm policies on a rural community in Texas. Results indicate that in the noncrop sector, two groups of industries are most affected by farm policy. The first...

Decarbonizing Europe's power sector by 2050 — Analyzing the economic implications of alternative decarbonization pathways

International Nuclear Information System (INIS)

Jägemann, Cosima; Fürsch, Michaela; Hagspiel, Simeon; Nagl, Stephan

2013-01-01

The European Union aims to reduce greenhouse gas emissions by 80–95% in 2050 compared to 1990 levels. The transition towards a low-carbon economy implies the almost complete decarbonization of Europe's power sector, which could be achieved along various pathways. In this paper, we evaluate the economic implications of alternative energy policies for Europe's power sector by applying a linear dynamic electricity system optimization model in over 36 scenarios. We find that the costs of decarbonizing Europe's power sector by 2050 vary between 139 and 633 bn € 2010 , which corresponds to an increase of between 11% and 44% compared to the total system costs when no CO 2 reduction targets are implemented. In line with economic theory, the decarbonization of Europe's power sector is achieved at minimal costs under a stand-alone CO 2 reduction target, which ensures competition between all low-carbon technologies. If, however, renewable energies are exempted from competition via supplementary renewable energy (RES-E) targets or if investments in new nuclear and CCS power plants are politically restricted, the costs of decarbonization significantly rise. Moreover, we find that the excess costs of supplementary RES-E targets depend on the acceptance of alternative low carbon technologies. For example, given a complete nuclear phase-out in Europe by 2050 and politically implemented restrictions on the application of CCS to conventional power plants, supplementary RES-E targets are redundant. While in such a scenario the overall costs of decarbonization are comparatively high, the excess costs of supplementary RES-E targets are close to zero. - Highlights: • We evaluate the economic implications of alternative energy policies for Europe's power sector. • Total decarbonization costs vary between 139 and 633 billion € 2010 up to 2050. • Decarbonization at minimal costs is ensured by competition between all low carbon technologies. • Excess costs of supplementary

Shore protection structures along Kerala coast-low cost alteratives

Digital Repository Service at National Institute of Oceanography (India)

DineshKumar, P.K.; Jasanto, P.K.; Sankaranarayanan, V.N.

Several studies over the last two decades on low cost shore protection measures are reviewed to have an integrated profile with a point on application to the sheltered coasts of Kerala. It is emphasised that these alternative are generally...

Health and economic costs of alternative energy sources

International Nuclear Information System (INIS)

Hamilton, L.D.; Manne, A.S.

1977-01-01

National energy policy requires realistic totaling of costs in assessing energy alternatives. The Biomedical and Environmental Assessment Division (BEAD) at Brookhaven is estimating biomedical and environmental costs of energy production and use. All forms of energy, including new technologies, are being considered. Beginning with a compilation of pollutants from the energy system, the various paths to man are traced and health effects evaluated. Excess mortality and morbidity in the U.S. attributable to a total fuel cycle to produce 6.6x10 9 kwh - about a year's production of a 1000-MWe power plant - are being estimated. Where enough information is available, estimates are quantitative. In some instances only the nature of the potential hazard can be described. This assessment aims at providing initial estimates of relative impacts to identify where the important health hazards in each fuel cycle arise, thereby identifying key areas for judging the total costs of alternative energy sources, and those areas of research likely to improve the accuracy of the estimates. It was thus estimated that the production of electric power from all sources in the U.S. in 1975 was associated with between two to nineteen thousand deaths and twenty-nine to fourty-eight thousand disabilities; this is roughly between 0.2 and 2% of total deaths in U.S. ages 1-74. The estimated health effects associated with a total fuel cycle standardized to produce 10 10 kwh electric power were: from coal estimated deaths 20-200, estimated disabilities 300-500; from oil estimated deaths 3-150, estimated disabilities 150-300; from gas estimated deaths 0.2, estimated disabilities 20; from nuclear estimated deaths 1-3, estimated disabilities 8-30. The differences in the year 2000 between health impacts of the U.S. energy system under normal growth expectations and under conditions of a nuclear moratorium were estimated. On the assumption that the nuclear moratorium would require 320 additional 1000-MWe

Capital cost: high and low sulfur coal plants-1200 MWe. [High sulfur coal

Energy Technology Data Exchange (ETDEWEB)

1977-01-01

This Commercial Electric Power Cost Study for 1200 MWe (Nominal) high and low sulfur coal plants consists of three volumes. The high sulfur coal plant is described in Volumes I and II, while Volume III describes the low sulfur coal plant. The design basis and cost estimate for the 1232 MWe high sulfur coal plant is presented in Volume I, and the drawings, equipment list and site description are contained in Volume II. The reference design includes a lime flue gas desulfurization system. A regenerative sulfur dioxide removal system using magnesium oxide is also presented as an alternate in Section 7 Volume II. The design basis, drawings and summary cost estimate for a 1243 MWe low sulfur coal plant are presented in Volume III. This information was developed by redesigning the high sulfur coal plant for burning low sulfur sub-bituminous coal. These coal plants utilize a mechanical draft (wet) cooling tower system for condenser heat removal. Costs of alternate cooling systems are provided in Report No. 7 in this series of studies of costs of commercial electrical power plants.

A preliminary evaluation of alternatives for disposal of INEL low-level waste and low-level mixed waste

International Nuclear Information System (INIS)

Smith, T.H.; Roesener, W.S.; Jorgenson-Waters, M.J.

1993-07-01

The Mixed and Low-Level Waste Disposal Facility (MLLWDF) project was established in 1992 by the US Department of Energy Idaho Operations Office to provide enhanced disposal capabilities for Idaho National Engineering Laboratory (INEL) low-level mixed waste and low-level waste. This Preliminary Evaluation of Alternatives for Disposal of INEL Low-Level Waste and Low-Level Mixed Waste identifies and evaluates-on a preliminary, overview basis-the alternatives for disposal of that waste. Five disposal alternatives, ranging from of no-action'' to constructing and operating the MLLWDF, are identified and evaluated. Several subalternatives are formulated within the MLLWDF alternative. The subalternatives involve various disposal technologies as well as various scenarios related to the waste volumes and waste forms to be received for disposal. The evaluations include qualitative comparisons of the projected isolation performance for each alternative, and facility, health and safety, environmental, institutional, schedule, and rough order-of-magnitude life-cycle cost comparisons. The performance of each alternative is evaluated against lists of ''musts'' and ''wants.'' Also included is a discussion of other key considerations for decisionmaking. The analysis of results indicated further study is necessary to obtain the best estimate of long-term future waste volume and characteristics from the INEL Environmental Restoration activities and the expanded INEL Decontamination and Decommissioning Program

The Cost of Compliance: A CGE Assessment of Canada's Policy Options under the Kyoto Protocol

Energy Technology Data Exchange (ETDEWEB)

Boehringer, Christoph (Univ. of Oldenburg, Dept. of Economics, D-26111 Oldenburg (Germany)); Rutherford, Thomas F. (ETH Zuerich, Center for Energy Policy and Economy, CH-8032 Zuerich (Switzerland))

2008-07-01

Canada is committed under the Kyoto Protocol to reduce greenhouse gas emissions between 2008 and 2012 to a level six percent below the 1990 reference value. To date, however, Canada's greenhouse gas emissions remain far above 1990 levels. Stringent short-term policy measures are needed if Canada is to meet this legally binding commitment. This paper uses a multi-region, multi-commodity static general equilibrium model to quantify the economic impacts of alternative compliance strategies for Canada in the context of climate policies undertaken by other Kyoto Parties. The numerical results confirm fears among Canadian policy makers of larger economic adjustment cost should Canada fulfill its Kyoto commitment solely through domestic action. Comprehensive use of flexible mechanisms - in particular the Clean Development Mechanism - could allow Canada to live up with its international climate policy commitment at a substantially lower economic cost

Shadow Cost of Public Funds and Privatization Policies

OpenAIRE

Sato, Susumu; Matsumura, Toshihiro

2017-01-01

We investigate the optimal privatization policy in mixed oligopolies with shadow cost of public funds (excess burden of taxation). The government is concerned with both the total social surplus and the revenue obtained by the privatization of a public firm. We find that the relationship between the shadow cost of public funds and the optimal privatization policy is non-monotone. When the cost is moderate, then higher the cost is, the lower is the optimal degree of privatization. ...

Cost analysis of Navy acquisition alternatives for the NAVSTAR Global Positioning System

Science.gov (United States)

Darcy, T. F.; Smith, G. P.

1982-12-01

This research analyzes the life cycle cost (LCC) of the Navy's current and two hypothetical procurement alternatives for NAVSTAR Global Positioning System (GPS) user equipment. Costs are derived by the ARINC Research Corporation ACBEN cost estimating system. Data presentation is in a comparative format describing individual alternative LCC and differential costs between alternatives. Sensitivity analysis explores the impact receiver-processor unit (RPU) first unit production cost has on individual alternative LCC, as well as cost differentials between each alternative. Several benefits are discussed that might provide sufficient cost savings and/or system effectiveness improvements to warrant a procurement strategy other than the existing proposal.

Cost-effective design of economic instruments in nutrition policy

Directory of Open Access Journals (Sweden)

Smed Sinne

2007-04-01

Full Text Available Abstract This paper addresses the potential for using economic regulation, e.g. taxes or subsidies, as instruments to combat the increasing problems of inappropriate diets, leading to health problems such as obesity, diabetes 2, cardiovascular diseases etc. in most countries. Such policy measures may be considered as alternatives or supplements to other regulation instruments, including information campaigns, bans or enhancement of technological solutions to the problems of obesity or related diseases. 7 different food tax and subsidy instruments or combinations of instruments are analysed quantitatively. The analyses demonstrate that the average cost-effectiveness with regard to changing the intake of selected nutritional variables can be improved by 10–30 per cent if taxes/subsidies are targeted against these nutrients, compared with targeting selected food categories. Finally, the paper raises a range of issues, which need to be investigated further, before firm conclusions about the suitability of economic instruments in nutrition policy can be drawn.

A general approach to total repair cost limit replacement policies

Directory of Open Access Journals (Sweden)

F. Beichelt

2014-01-01

Full Text Available A common replacement policy for technical systems consists in replacing a system by a new one after its economic lifetime, i.e. at that moment when its long-run maintenance cost rate is minimal. However, the strict application of the economic lifetime does not take into account the individual deviations of maintenance cost rates of single systems from the average cost development. Hence, Beichet proposed the total repair cost limit replacement policy: the system is replaced by a new one as soon as its total repair cost reaches or exceeds a given level. He modelled the repair cost development by functions of the Wiener process with drift. Here the same policy is considered under the assumption that the one-dimensional probability distribution of the process describing the repair cost development is given. In the examples analysed, applying the total repair cost limit replacement policy instead of the economic life-time leads to cost savings of between 4% and 30%. Finally, it is illustrated how to include the reliability aspect into the policy.

Innovative Feed-In Tariff Designs that Limit Policy Costs

Energy Technology Data Exchange (ETDEWEB)

Kreycik, Claire [National Renewable Energy Lab. (NREL), Golden, CO (United States); Couture, Toby D. [E3 Analytics, Berlin (Germany); Cory, Karlynn S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2011-06-01

Feed-in tariffs (FITs) are the most prevalent policy used globally to reduce development risks, cut financing costs, and grow the renewable energy industry. However, concerns over escalating costs in jurisdictions with FIT policies have led to increased attention on cost control. Using case studies and market-focused analysis, this report from the National Renewable Energy Laboratory (NREL) examines strengths and weaknesses of three cost-containment tools: (1) caps, (2) payment level adjustment mechanisms, and (3) auction-based designs. The report provides useful insights on containing costs for policymakers and regulators in the United States and other areas where FIT policies are in development.

Design of a low-cost thermoacoustic electricity generator and its experimental verification

Energy Technology Data Exchange (ETDEWEB)

Backhaus, Scott N [Los Alamos National Laboratory; Yu, Z [UNIV OF MANCHESTER; Jaworski, A J [UNIV OF MANCHESTER

2010-01-01

This paper describes the design and testing of a low cost thermoacoustic generator. A travelling-wave thermoacoustic engine with a configuration of a looped-tube resonator is designed and constructed to convert heat to acoustic power. A commercially available, low-cost loudspeaker is adopted as the alternator to convert the engine's acoustic power to electricity. The whole system is designed using linear thermoacoustic theory. The optimization of different parts of the thermoacoustic generator, as well as the matching between the thermoacoustic engine and the alternator are discussed in detail. A detailed comparison between the preliminary test results and linear thermoacoustic predictions is provided.

''When Cost Measures Contradict''

Energy Technology Data Exchange (ETDEWEB)

Montgomery, W. D.; Smith, A. E.; Biggar, S. L.; Bernstein, P. M.

2003-05-09

When regulators put forward new economic or regulatory policies, there is a need to compare the costs and benefits of these new policies to existing policies and other alternatives to determine which policy is most cost-effective. For command and control policies, it is quite difficult to compute costs, but for more market-based policies, economists have had a great deal of success employing general equilibrium models to assess a policy's costs. Not all cost measures, however, arrive at the same ranking. Furthermore, cost measures can produce contradictory results for a specific policy. These problems make it difficult for a policy-maker to determine the best policy. For a cost measures to be of value, one would like to be confident of two things. First one wants to be sure whether the policy is a winner or loser. Second, one wants to be confident that a measure produces the correct policy ranking. That is, one wants to have confidence in a policy measure's ability to correctly rank policies from most beneficial to most harmful. This paper analyzes empirically these two properties of different costs measures as they pertain to assessing the costs of the carbon abatement policies, especially the Kyoto Protocol, under alternative assumptions about implementation.

Costs and Benefits of Implementing Green Building Policy

NARCIS (Netherlands)

Fan, Ke; Wei, G; Qian, K.; Chan, E

2017-01-01

Green building (GB) policies have been implemented to promote GB and address climate change. Most of the existing literatures have studied the costs and benefits of developing GB, without considerations of GB policies’ impacts. This paper aims to study costs and benefits of implementing GB policy

LCX: Proposal for a low-cost commercial transport

Science.gov (United States)

Hartman, Troy; Hayatdavoudi, Maziar; Hettinga, Joel; Hooper, Matt; Nguyen, Phong

1994-01-01

The LCX has been developed in response to a request for proposal for an aircraft with 153 passenger capacity and a range of 3000 nautical miles. The goals of the LCX are to provide an aircraft which will achieve the stated mission requirements at the lowest cost possible, both for the manufacturer and the operator. Low cost in this request is defined as short and long term profitability. To achieve this objective, modern technologies attributing to low-cost operation without greatly increasing the cost of manufacturing were employed. These technologies include hybrid laminar flow control and the use of developing new manufacturing processes and philosophies. The LCX will provide a competitive alternative to the use of the Airbus A319/320/321 and the Boeing 737 series of aircraft. The LCX has a maximum weight of 150,000 lb. carried by a wing of 1140 ft(exp 2) and an aspect ratio of 10. The selling price of the LCX is 31 million in 1994 US dollars.

Measuring the distribution of equity in terms of energy, environmental, and economic costs in the fuel cycles of alternative fuel vehicles with hydrogen pathway scenarios

Science.gov (United States)

Meyer, Patrick E.

Numerous analyses exist which examine the energy, environmental, and economic tradeoffs between conventional gasoline vehicles and hydrogen fuel cell vehicles powered by hydrogen produced from a variety of sources. These analyses are commonly referred to as "E3" analyses because of their inclusion of Energy, Environmental, and Economic indicators. Recent research as sought a means to incorporate social Equity into E3 analyses, thus producing an "E4" analysis. However, E4 analyses in the realm of energy policy are uncommon, and in the realm of alternative transportation fuels, E4 analyses are extremely rare. This dissertation discusses the creation of a novel E4 simulation tool usable to weigh energy, environmental, economic, and equity trade-offs between conventional gasoline vehicles and alternative fuel vehicles, with specific application to hydrogen fuel cell vehicles. The model, dubbed the F uel Life-cycle Analysis of Solar Hydrogen -- Energy, Environment, Economic & Equity model, or FLASH-E4, is a total fuel-cycle model that combines energy, environmental, and economic analysis methodologies with the addition of an equity analysis component. The model is capable of providing results regarding total fuel-cycle energy consumption, emissions production, energy and environmental cost, and level of social equity within a population in which low-income drivers use CGV technology and high-income drivers use a number of advanced hydrogen FCV technologies. Using theories of equity and social indicators conceptually embodied in the Lorenz Curve and Gini Index, the equity of the distribution of societal energy and environmental costs are measured for a population in which some drivers use CGVs and other drivers use FCVs. It is found, based on baseline input data representative of the United States (US), that the distribution of energy and environmental costs in a population in which some drivers use CGVs and other drivers use natural gas-based hydrogen FCVs can be

Emission Control Cost-Effectiveness of Alternative-Fuel Vehicles

OpenAIRE

Wang, Quanlu; Sperling, Daniel; Olmstead, Janis

1993-01-01

Although various legislation and regulations have been adopted to promote the use of alternative-fuel vehicles for curbing urban air pollution problems, there is a lack of systematic comparisons of emission control cost-effectiveness among various alternative-fuel vehicle types. In this paper, life-cycle emission reductions and life-cycle costs were estimated for passenger cars fueled with methanol, ethanol, liquified petroleum gas, compressed natural gas, and electricity. Vehicle emission es...

Cost Effectiveness of Alternative Route Special Education Teacher Preparation

Science.gov (United States)

Sindelar, Paul T.; Dewey, James F.; Rosenberg, Michael S.; Corbett, Nancy L.; Denslow, David; Lotfinia, Babik

2012-01-01

In this study, the authors estimated costs of alternative route preparation to provide states a basis for allocating training funds to maximize production. Thirty-one special education alternative route program directors were interviewed and completed cost tables. Two hundred and twenty-four program graduates were also surveyed. The authors…

External costs of nuclear: Greater or less than the alternatives?

International Nuclear Information System (INIS)

Rabl, Ari; Rabl, Veronika A.

2013-01-01

Since Fukushima many are calling for a shutdown of nuclear power plants. To see whether such a shutdown would reduce the risks for health and environment, the external costs of nuclear electricity are compared with alternatives that could replace it. The frequency of catastrophic nuclear accidents is based on the historical record, about one in 25 years for the plants built to date, an order of magnitude higher than the safety goals of the U.S. Nuclear Regulatory Commission. Impacts similar to Chernobyl and Fukushima are assumed to estimate the cost. A detailed comparison is presented with wind as alternative with the lowest external cost. The variability of wind necessitates augmentation by other sources, primarily fossil fuels, because storage at the required scale is in most regions too expensive. The external costs of natural gas combined cycle are taken as 0.6 €cent/kWh due to health effects of air pollution and 1.25 €cent/kWh due to greenhouse gases (at 25€/t CO 2 eq ) for the central estimate, but a wide range of different parameters is also considered, both for nuclear and for the alternatives. Although the central estimate of external costs of the wind-based alternative is higher than that of nuclear, the uncertainty ranges overlap. - Highlights: ► The external costs of nuclear electricity are compared with the alternatives. ► Frequency and cost of nuclear accidents based on Chernobyl and Fukushima. ► Detailed comparison with wind as alternative with the lowest external costs. ► High external cost of wind because of natural gas backup (storage too limited). ► External costs of wind higher than nuclear but uncertainty ranges overlap

Economy of climate policy. Criticism and alternatives

International Nuclear Information System (INIS)

Van den Bergh, J.C.J.M.

2002-01-01

The economy of climate policy is characterized by notions as cost-benefit analysis, optimal policy and optimal timing. It is argued that the use of such notions reflects an unjustified optimism with respect to the contribution of economic science to the discussion on climate policy. The complexity of the biosphere and the uncertainty about climatic change, as well as their socio-economic consequences, are extensive. Another economic approach of the climate problem is suggested, based on complexity and historical justice. 12 refs [nl

Low Cost Processing of Commingled Thermoplastic Composites

Science.gov (United States)

Chiasson, Matthew Lee

A low cost vacuum consolidation process has been investigated for use with commingled thermoplastic matrix composites. In particular, the vacuum consolidation behaviour of commingled polypropylene/glass fibre and commingled nylon/carbon fibre precursors were studied. Laminates were consolidated in a convection oven under vacuum pressure. During processing, the consolidation of the laminate packs was measured by use of non-contact eddy current sensors. The consolidation curves are then used to tune an empirical consolidation model. The overall quality of the resulting laminates is also discussed. Dynamic mechanical analysis, differential scanning calorimetry and mechanical tensile testing were also performed in order to determine the effects of varying processing parameters on the physical and mechanical properties of the laminates. Through this analysis, it was determined that the nylon/carbon fibre blend was not suitable for vacuum consolidation, while the polypropylene/glass fibre blend is a viable option for vacuum consolidation. The ultimate goal of this work is to provide a foundation from which low cost unmanned aerial vehicle (UAV) components can be designed and manufactured from thermoplastic matrix composites using a low cost processing technique as an alternative to traditional thermoset composite materials.

An evaluation of the alternative transport fuel policies for Turkey

International Nuclear Information System (INIS)

Arslan, Ridvan; Ulusoy, Yahya; Tekin, Yuecel; Suermen, Ali

2010-01-01

The search for alternative fuels and new fuel resources is a top priority for Turkey, as is the case in the majority of countries throughout the world. The fuel policies pursued by governmental or civil authorities are of key importance in the success of alternative fuel use, especially for widespread and efficient use. Following the 1973 petroleum crisis, many users in Turkey, especially in transportation sector, searched for alternative fuels and forms of transportation. Gasoline engines were replaced with diesel engines between the mid-1970s and mid-1980s. In addition, natural gas was introduced to the Turkish market for heating in the early 1990s. Liquid petroleum gas was put into use in the mid-1990s, and bio-diesel was introduced into the market for transportation in 2003. However, after long periods of indifference governmental action, guidance and fuel policies were so weak that they did not make sense. Entrepreneurs and users experienced great economical losses and lost confidence in future attempts to search for other possible alternatives. In the present study, we will look at the history of alternative fuel use in the recent past and investigate the alternative engine fuel potential of Turkey, as well as introduce possible future policies based on experience.

An evaluation model for low carbon island policy: The case of Taiwan's green transportation policy

International Nuclear Information System (INIS)

Trappey, Amy J.C.; Trappey, Charles; Hsiao, C.T.; Ou, Jerry J.R.; Li, S.J.; Chen, Kevin W.P.

2012-01-01

Conserving energy and reducing carbon emissions have become the common responsibility of the international community. During the year 2010, the Taiwan government planned a four-year project budgeted at 300 million US dollars, called “The Penghu Low Carbon Island Development Project.” The policy objective is to use Penghu Island (population 85,000) as a test platform to evaluate new ways to conserve energy and reduce carbon emissions before attempting to replicate the policies on Taiwan Island. For Taiwan, a zero carbon island green transportation policy will regulate the total number of electric scooters, the total number of gasoline motorcycles, influence government subsidy incentives, and create the need for new motorcycle license issuing and control. These factors interact with each other to form a complex and dynamic system that impacts policy as well as the current way of life. In this study, a system dynamics approach is designed to construct a model for evaluating the green transportation policy on Penghu Island. Simulations are conducted to model green transportation system behavior and related policy effects in a smaller, controlled environment before creating policies for Taiwan Island that will impact the lives of over 23 million people. - Highlights: ► Provides an overview of Taiwan's Penghu Low Carbon Island Development Project. ► Develops a systems dynamics approach for green transportation policy assessment. ► Provides causal analysis of social, economic, and environmental factors. ► Demonstrates that the proposed policy cannot meet the CO 2 reduction goals. ► Alternative policies can be evaluated using the proposed approach.

Low-Cost Alternative External Rotation Shoulder Brace and Review of Treatment in Acute Shoulder Dislocations

Directory of Open Access Journals (Sweden)

Lacy, Kyle

2015-01-01

Full Text Available Traumatic dislocations of the shoulder commonly present to emergency departments (EDs. Immediate closed reduction of both anterior and posterior glenohumeral dislocations is recommended and is frequently performed in the ED. Recurrence of dislocation is common, as anteroinferior labral tears (Bankart lesions are present in many anterior shoulder dislocations.14,15,18,23 Immobilization of the shoulder following closed reduction is therefore recommended; previous studies support the use of immobilization with the shoulder in a position of external rotation, for both anterior and posterior shoulder dislocations.7-11,19 In this study, we present a technique for assembling a low-cost external rotation shoulder brace using materials found in most hospitals: cotton roll, stockinette, and shoulder immobilizers. This brace is particularly suited for the uninsured patient, who lacks the financial resources to pay for a pre-fabricated brace out of pocket. We also performed a cost analysis for our low-cost external rotation shoulder brace, and a cost comparison with pre-fabricated brand name braces. At our institution, the total materials cost for our brace was $19.15. The cost of a pre-fabricated shoulder brace at our institution is $150 with markup, which is reimbursed on average at $50.40 according to our hospital billing data. The low-cost external rotation shoulder brace is therefore a more affordable option for the uninsured patient presenting with acute shoulder dislocation. [West J Emerg Med. 2015;16(1:114–120.

Analysis of alternatives for immobilized low activity waste disposal

Energy Technology Data Exchange (ETDEWEB)

Burbank, D.A.

1997-10-28

This report presents a study of alternative disposal system architectures and implementation strategies to provide onsite near-surface disposal capacity to receive the immobilized low-activity waste produced by the private vendors. The analysis shows that a flexible unit strategy that provides a suite of design solutions tailored to the characteristics of the immobilized low-activity waste will provide a disposal system that best meets the program goals of reducing the environmental, health, and safety impacts; meeting the schedule milestones; and minimizing the life-cycle cost of the program.

Analysis of alternatives for immobilized low-activity waste disposal

International Nuclear Information System (INIS)

Burbank, D.A.

1997-01-01

This report presents a study of alternative disposal system architectures and implementation strategies to provide onsite near-surface disposal capacity to receive the immobilized low-activity waste produced by the private vendors. The analysis shows that a flexible unit strategy that provides a suite of design solutions tailored to the characteristics of the immobilized low-activity waste will provide a disposal system that best meets the program goals of reducing the environmental, health, and safety impacts; meeting the schedule milestones; and minimizing the life-cycle cost of the program

The Source of Variation in Policies around the World: The Case of Protection of Human Health from Extremely Low Frequency Electromagnetic Fields

International Nuclear Information System (INIS)

Kandel, S.

2006-01-01

Scientific evidence supposedly plays a dominant role in environmental and public health regulation. This paper uses the example of Extremely Low Frequency Electromagnetic Fields regulation to test whether this is indeed the case. The paper first shows that there exists a significant variation in health protection policies for Extremely Low Frequencies Extremely Low Frequency Electromagnetic Fields around the world. Some countries adopt the international scientific-based guidelines while other countries choose to apply additional precautionary regulations of varying severity. Electromagnetic Fields policy makers around the world indicate that the Cost Benefit Analysis is one of the parameters considered for their choice among various policy options. A simple Cost Benefit Analysis framework is presented, utilizing scientific evidence on health risks from Extremely Low Frequencies as well as parameter values used in the Cost Benefit Analysis studies from California, Netherlands, Israel, and the United Kingdom to determine the justification of using several mitigation techniques. This Cost Benefit Analysis using data from the different countries leads to a clear conclusion: under all parameter values considered, only the low cost intervention measures, such as re-phasing and compacting lines, are justified. Re-routing lines, except in cases of very close proximity to residences, and under grounding existing lines cannot be justified due to the high costs involved and the small health benefits that are projected. Since the stringent policies cannot be accomplished with the low-cost measures, this suggests that if the Cost Benefit Analysis were indeed the basis for the policies implemented in different countries, one would expect a smaller variation in the worldwide policies observed today. The divergence between the policies that are implemented and those that can be supported by the Cost Benefit Analysis suggests that the Cost Benefit Analysis is either not used to

An assessment of electric vehicles: technology, infrastructure requirements, greenhouse-gas emissions, petroleum use, material use, lifetime cost, consumer acceptance and policy initiatives.

Science.gov (United States)

Delucchi, M A; Yang, C; Burke, A F; Ogden, J M; Kurani, K; Kessler, J; Sperling, D

2014-01-13

Concerns about climate change, urban air pollution and dependence on unstable and expensive supplies of foreign oil have led policy-makers and researchers to investigate alternatives to conventional petroleum-fuelled internal-combustion-engine vehicles in transportation. Because vehicles that get some or all of their power from an electric drivetrain can have low or even zero emissions of greenhouse gases (GHGs) and urban air pollutants, and can consume little or no petroleum, there is considerable interest in developing and evaluating advanced electric vehicles (EVs), including pure battery-electric vehicles, plug-in hybrid electric vehicles and hydrogen fuel-cell electric vehicles. To help researchers and policy-makers assess the potential of EVs to mitigate climate change and reduce petroleum use, this paper discusses the technology of EVs, the infrastructure needed for their development, impacts on emissions of GHGs, petroleum use, materials use, lifetime costs, consumer acceptance and policy considerations.

Beyond free electricity: the costs of electric cooking in poor households and a market-friendly alternative

International Nuclear Information System (INIS)

Howells, M.; Alfstad, T.; Victor, D.G.; Elias, R.J.; Gaunt, T.

2006-01-01

The South African government is introducing a poverty-reduction policy that will supply households with a monthly 50 kWh free basic electricity (FBE) subsidy. We show that FBE distorts the energy choices of poor households by encouraging them to cook with electricity, whereas alternatives such as liquefied petroleum gas (LPG) can deliver a similar cooking service at a much lower cost to society. An alternative energy scheme, such as providing households with clean energy credits equivalent in value to the FBE's cost, could deliver additional energy services worth at least 6% of total household welfare (and probably much more) at no additional public cost; those benefits are so large that they would cover the entire cost of LPG fuel needed to implement the scheme. The analysis is extremely sensitive to the coincidence of electric cooking with peak power demand on the South African grid and to assumptions regarding how South Africa will meet its looming shortfall in peak power capacity. One danger of FBE is that actual peak coincidence and the costs of supplying peak power could be much less favorable than we assume, and such uncertainties expose the South African power system to potentially very high costs of service. (author)

Beyond free electricity: The costs of electric cooking in poor households and a market-friendly alternative

International Nuclear Information System (INIS)

Howells, Mark; Victor, David G.; Gaunt, Trevor; Elias, Rebecca J.; Alfstad, Thomas

2006-01-01

The South African government is introducing a poverty-reduction policy that will supply households with a monthly 50 kWh free basic electricity (FBE) subsidy. We show that FBE distorts the energy choices of poor households by encouraging them to cook with electricity, whereas alternatives such as liquefied petroleum gas (LPG) can deliver a similar cooking service at a much lower cost to society. An alternative energy scheme, such as providing households with clean energy credits equivalent in value to the FBE's cost, could deliver additional energy services worth at least 6% of total household welfare (and probably much more) at no additional public cost; those benefits are so large that they would cover the entire cost of LPG fuel needed to implement the scheme. The analysis is extremely sensitive to the coincidence of electric cooking with peak power demand on the South African grid and to assumptions regarding how South Africa will meet its looming shortfall in peak power capacity. One danger of FBE is that actual peak coincidence and the costs of supplying peak power could be much less favorable than we assume, and such uncertainties expose the South African power system to potentially very high costs of service

Post-Keynesian alternative policies to curb macroeconomic imbalances in the Euro area

Directory of Open Access Journals (Sweden)

Hein Eckhard

2015-01-01

Full Text Available In this paper we outline alternative post-Keynesian policy recommendations addressing the problems of differential inflation, divergence in competitiveness and associated current account imbalances within the Euro area. We provide a basic framework in order to systematically address the related issues making use of Anthony P. Thirlwall’s (1979, 2002 model of a “balance-of-payments-constrained growth rate” (BPCGR. Based on this framework, we outline the required stance for alternative economic policies and then we discuss the implications for alternative monetary, wage/incomes and fiscal policies in the Euro area as a whole, as well as the consequences for structural and regional policies in the Euro area periphery, in particular.

Risks, revenues and investment in electricity generation. Why policy needs to look beyond costs

International Nuclear Information System (INIS)

Gross, Robert; Heptonstall, Philip; Blyth, William

2010-01-01

Energy policy goals frequently depend upon investment in particular technologies, or categories of technology. Whilst the British government has often espoused the virtues of technological neutrality, UK policies now seek to promote nuclear power, coal with CO 2 capture and storage, and renewable energy. Policy decisions are often informed by estimates of cost per unit of output (for example, pound /MWh), also known as levelised costs. Estimates of these costs for different technologies are often used to provide a 'ballpark' guide to the levels of financial support needed (if any) to encourage uptake, or direct investment away from the technologies the market might otherwise have chosen. Levelised cost estimates can also help to indicate the cost of meeting public policy objectives, and whether there is a rationale for intervention (for example, based on net welfare gains). In the UK electricity sector, investment is undertaken by private companies, not governments. Investment is driven by expected returns, in the light of a range of risks related to both costs and revenues. Revenue risks are not captured in estimates of cost or cost-related risks. An important category of revenue risk is associated with electricity price fluctuations. Exposure to price risks differs by technology. Low electricity prices represent a revenue risk to technologies that cannot influence electricity prices. By contrast, 'price makers' that set marginal prices are, to an extent, able to pass fuel price increases through to consumers. They have an inherent 'hedge' against fuel and electricity price fluctuations. Based on recent research by the UK Energy Research Centre, this paper considers the implications of such price risks for policy design. The authors contrast the range of levelised costs estimated for different generating options with the spread of returns each is exposed to when electricity price fluctuations are factored in. Drawing on recent policy experiences in the renewable

Alternative policies for solid waste management

OpenAIRE

Percoco Marco

2004-01-01

Because of the recent dramatic increase in waste production, solid waste management and control have become one of the central issues in environmental policy. In this paper we review alternative fiscal instruments to control the production of residuals by using the benchmark given by the social optimum. Finnally, we apply the model to theoretically evaluate the TARI.

Decommissioning of nuclear power plants: policies, strategies and costs

International Nuclear Information System (INIS)

Lund, I.

2004-01-01

As many nuclear power plants will reach the end of their lifetime during the next 20 years or so, decommissioning is an increasingly important topic for governments, regulators and industries. From a governmental viewpoint, particularly in a deregulated market, one essential aspect is to ensure that money for the decommissioning of nuclear installations will be available at the time it is needed, and that no 'stranded' liabilities will be left to be financed by the taxpayers rather than by the electricity consumers. For this reason, there is governmental interest in understanding decommissioning costs, and in periodically reviewing decommissioning cost estimates from nuclear installation owners. Robust cost estimates are key elements in designing and implementing a coherent and comprehensive national decommissioning policy including the legal and regulatory bases for the collection, saving and use of decommissioning funds. From the industry viewpoint, it is essential to assess and monitor decommissioning costs in order to develop a coherent decommissioning strategy that reflects national policy and assures worker and public safety, whilst also being cost effective. For these reasons, nuclear power plant owners are interested in understanding decommissioning costs as best as possible and in identifying major cost drivers, whether they be policy, strategy or 'physical' in nature. National policy considerations will guide the development of national regulations that are relevant for decommissioning activities. Following these policies and regulations, industrial managers responsible for decommissioning activities will develop strategies which best suit their needs, while appropriately meeting all government requirements. Decommissioning costs will be determined by technical and economic conditions, as well as by the strategy adopted. Against this backdrop, the study analyses the relationships among decommissioning policy as developed by governments, decommissioning

Low cost thermal solar collector

International Nuclear Information System (INIS)

Abugderah, M. M.; Schneider, E. L.; Tontini, M. V.

2006-01-01

Solar energy is a good alternative in the economy of the electric energy mainly for the water heating. However, the solar heaters used demand a high initial investment, becoming the warm water from solar energy inaccessible to a large part of the society. Thus, a low cost solar heater was developed, constructed and tested in the chemical engineering department of West Parana State University-Unioeste. This equipment consists of 300 cans, divided in 30 columns of 10 cans each, all painted in black to enhance the obsorption of the solar radiation. The columns are connected to a pipe of pvc of 8 liters with 0.085m of external diameter. The equipment is capable to heat 120 liters of water in temperatures around 60 degree centigrade. The heater is insolated in its inferior part with cardboard and aluminum, covered with a transparent plastic in its superior. The system still counts with a insulated thermal reservoir, which can conserve the water in temperatures adjusted for the night non-solar days domestic use. The advantage of the constructed is it low cost material. The results are given an graphical tabular from showing acceptable efficiencies.(Autho

Life-Cycle Cost and Risk Analysis of Alternative Configurations for Shipping Low-Level Radioactive Waste to the Nevada Test Site

International Nuclear Information System (INIS)

PM Daling; SB Ross; BM Biwer

1999-01-01

The Nevada Test Site (NTS) is a major receiver of low-level radioactive waste (LLW) for disposal. Currently, all LLW received at NTS is shipped by truck. The trucks use highway routes to NTS that pass through the Las Vegas Valley and over Hoover Dam, which is a concern of local stakeholder groups in the State of Nevada. Rail service offers the opportunity to reduce transportation risks and costs, according to the Waste Management Programmatic Environmental Impact Statement (WM-PEIS). However, NTS and some DOE LLW generator sites are not served with direct rail service so intermodal transport is under consideration. Intermodal transport involves transport via two modes, in this case truck and rail, from the generator sites to NTS. LLW shipping containers would be transferred between trucks and railcars at intermodal transfer points near the LLW generator sites, NTS, or both. An Environmental Assessment (EA)for Intermodal Transportation of Low-Level Radioactive Waste to the Nevada Test Site (referred to as the NTSIntermodal -M) has been prepared to determine whether there are environmental impacts to alterations to the current truck routing or use of intermodal facilities within the State of Nevada. However, an analysis of the potential impacts outside the State of Nevada are not addressed in the NTS Intermodal EA. This study examines the rest of the transportation network between LLW generator sites and the NTS and evaluates the costs, risks, and feasibility of integrating intermodal shipments into the LLW transportation system. This study evaluates alternative transportation system configurations for NTS approved and potential generators based on complex-wide LLW load information. Technical judgments relative to the availability of DOE LLW generators to ship from their sites by rail were developed. Public and worker risk and life-cycle cost components are quantified. The study identifies and evaluates alternative scenarios that increase the use of rail (intermodal

Life-Cycle Cost and Risk Analysis of Alternative Configurations for Shipping Low-Level Radioactive Waste to the Nevada Test Site

Energy Technology Data Exchange (ETDEWEB)

PM Daling; SB Ross; BM Biwer

1999-12-17

The Nevada Test Site (NTS) is a major receiver of low-level radioactive waste (LLW) for disposal. Currently, all LLW received at NTS is shipped by truck. The trucks use highway routes to NTS that pass through the Las Vegas Valley and over Hoover Dam, which is a concern of local stakeholder groups in the State of Nevada. Rail service offers the opportunity to reduce transportation risks and costs, according to the Waste Management Programmatic Environmental Impact Statement (WM-PEIS). However, NTS and some DOE LLW generator sites are not served with direct rail service so intermodal transport is under consideration. Intermodal transport involves transport via two modes, in this case truck and rail, from the generator sites to NTS. LLW shipping containers would be transferred between trucks and railcars at intermodal transfer points near the LLW generator sites, NTS, or both. An Environmental Assessment (EA)for Intermodal Transportation of Low-Level Radioactive Waste to the Nevada Test Site (referred to as the NTSIntermodal -M) has been prepared to determine whether there are environmental impacts to alterations to the current truck routing or use of intermodal facilities within the State of Nevada. However, an analysis of the potential impacts outside the State of Nevada are not addressed in the NTS Intermodal EA. This study examines the rest of the transportation network between LLW generator sites and the NTS and evaluates the costs, risks, and feasibility of integrating intermodal shipments into the LLW transportation system. This study evaluates alternative transportation system configurations for NTS approved and potential generators based on complex-wide LLW load information. Technical judgments relative to the availability of DOE LLW generators to ship from their sites by rail were developed. Public and worker risk and life-cycle cost components are quantified. The study identifies and evaluates alternative scenarios that increase the use of rail (intermodal

Low osmolar (non-ionic) contrast media versus high osmolar (ionic) contrast media in intravenous urography and enhanced computerized tomography: a cost-effectiveness analysis.

Science.gov (United States)

Wangsuphachart, S

1991-12-01

The cost-effectiveness of three alternative policies for the use of intravenous contrast media for urography and enhanced computerized tomography (CT) are analyzed. Alternative #1 is to use high osmolar contrast media (HOCM) in all patients, the historical policy. Alternative #2 is to replace it with low osmolar contrast media (LOCM) in all patients. Alternative #3 is to use LOCM only in the high risk patients. Data on the 6,242 patients who underwent intravenous urography and enhanced CT at the Department of Radiology, Chulalongkorn Hospital in 1989 were used. Both societal and hospital viewpoints were analyzed. The incremental cost-effectiveness (ICE) between #2 and #1 was 26,739 Baht (US$1,070) per healthy day saved (HDS), while the ICE between #3 and #1 was 12,057 Baht (US$482) per HDS. For fatal cases only, ICE between #2 and #1 was 35,111 Baht (US$1,404) per HDS, while the ICE between #3 and #1 was 18,266 Baht (US$731) per HDS. The incremental cost (IC) per patient was 2,341 Baht (US$94) and 681 Baht (US$27) respectively. For the hospital viewpoint the ICE between #2 and #1 was 13,744 (US$550) and between #3 and #1 was 6,127 Baht (US$245) per HDS. The IC per patient was 1,203 Baht (US$48) and 346 Baht (US$14), respectively. From the sensitivity analysis, #3 should be used if the LOCM price is reduced more than 75% (equal to 626 Baht or less) and more than 80% of the patients are able to pay for the contrast media.

When does unreliable grid supply become unacceptable policy? Costs of power supply and outages in rural India

International Nuclear Information System (INIS)

Harish, Santosh M.; Morgan, Granger M.; Subrahmanian, Eswaran

2014-01-01

Despite frequent blackouts and brownouts, extension of the central grid remains the Indian government's preferred strategy for the country's rural electrification policy. This study reports an assessment that compares grid extension with distributed generation (DG) alternatives, based on the subsidies they will necessitate, and costs of service interruptions that are appropriate in the rural Indian context. Using cross-sectional household expenditure data and region fixed-effects models, average household demand is estimated. The price elasticity of demand is found to be in the range of −0.3 to −0.4. Interruption costs are estimated based on the loss of consumer surplus due to reduced consumption of electric lighting energy that results from intermittent power supply. Different grid reliability scenarios are simulated. Despite the inclusion of interruption costs, standalone DG does not appear to be competitive with grid extension at distances of less than 17 km. However, backing up unreliable grid service with local DG plants is attractive when reliability is very poor, even in previously electrified villages. Introduction of energy efficient lighting changes these economics, and the threshold for acceptable grid unreliability significantly reduces. A variety of polices to promote accelerated deployment and the wider adoption of improved end-use efficiency, warrant serious consideration. - Highlights: • We question the reliance on conventional grid in rural electricity supply in India. • Alternatives compared through government subsidies and consumer interruption costs. • Interruption costs are estimated based on loss of consumer surplus due to outages. • Augmenting unreliable grid with local biomass or diesel based backups preferable. • With efficient lighting, standalone biomass plants are optimal at very low distances

Scilab software as an alternative low-cost computing in solving the linear equations problem

Science.gov (United States)

Agus, Fahrul; Haviluddin

2017-02-01

Numerical computation packages are widely used both in teaching and research. These packages consist of license (proprietary) and open source software (non-proprietary). One of the reasons to use the package is a complexity of mathematics function (i.e., linear problems). Also, number of variables in a linear or non-linear function has been increased. The aim of this paper was to reflect on key aspects related to the method, didactics and creative praxis in the teaching of linear equations in higher education. If implemented, it could be contribute to a better learning in mathematics area (i.e., solving simultaneous linear equations) that essential for future engineers. The focus of this study was to introduce an additional numerical computation package of Scilab as an alternative low-cost computing programming. In this paper, Scilab software was proposed some activities that related to the mathematical models. In this experiment, four numerical methods such as Gaussian Elimination, Gauss-Jordan, Inverse Matrix, and Lower-Upper Decomposition (LU) have been implemented. The results of this study showed that a routine or procedure in numerical methods have been created and explored by using Scilab procedures. Then, the routine of numerical method that could be as a teaching material course has exploited.

Policy options to contain healthcare costs: a review and classification

NARCIS (Netherlands)

Stadhouders, N.W.; Koolman, X.; Tanke, M.A.C.; Maarse, H.; Jeurissen, P.P.T.

2016-01-01

Containing health care costs has been a challenge for most OECD member states. We classify 2250 cost containment policies in forty-one groups of policy options. This conceptual framework might act as a toolkit for policymakers that seek to develop strategies for cost control; and for researchers

Social cost of CO2 abatement from energy efficiency and solar power in the United States

International Nuclear Information System (INIS)

Hall, D.C.

1992-01-01

Frequently cited empirical analysis ask whether we should make the transition from reliance on fossil fuels to reduce greenhouse gas emissions, and conclude that the transition is too costly so we should, instead, focus policy on how to adapt to global warming. This paper makes two improvements in the analysis. First, this empirical analysis accounts for existing low-cost alternatives that are substitutes for fossil fuels. Second, this empirical analysis incorporates existing estimates of externalities from fossil fuels. These two basic improvements in the analysis alter the conclusion; policy should focus on how rapidly and extensively to make the transition from reliance on fossil fuels to the alternatives. The corollary is that we should focus on the efficacy and cost of policy options that are designed to accomplish the transition. 4 tabs., 1 app., 45 refs

42 CFR 100.2 - Average cost of a health insurance policy.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Average cost of a health insurance policy. 100.2... VACCINE INJURY COMPENSATION § 100.2 Average cost of a health insurance policy. For purposes of determining..., less certain deductions. One of the deductions is the average cost of a health insurance policy, as...

BOOK REVIEW OPEN EDUCATIONAL RESOURCES: Policy, Costs and Transformation

Directory of Open Access Journals (Sweden)

Can GULER

2016-10-01

Full Text Available This book presents 15 case studies contributed by researchers and policy makers. The Open Educational Resources (OER implementations are expressed through different point of views. This book focused on three themes: policy, costs and transformation. Policy theme is related to the establishment of priorities for supporting the decisions made by an institution or organization. Costs theme explores the funding of OER, particularly in the sense of cost effectiveness. Transformation theme provides examples that demonstrate how OER can be used in ways that go beyond replication of current teaching and learning models. The editors in the Introduction elaborately describe these three themes.

Policies to Avoid Cost Overruns in Infrastructure Projects: Critical Evaluation and Recommendations

Directory of Open Access Journals (Sweden)

Hans Lind

2014-09-01

Full Text Available Many infrastructure projects have cost overruns and there has been a lot of research both on why these cost overruns occur and what can be done to reduce hem. Bent Flyvbjerg is the leading researcher in the area and in this article his proposals are used as the starting point. Besides a literature review, a questionnaire was sent out to experienced Swedish project managers to find out what they thought could reduce cost overruns. The literature review and the questionnaire were the foundation for the proposals formulated in this article. Proposals concerned three areas: (1. Organisational macro-structure, e.g. using more PPP projects but also decentralisation of budgets where cost overruns in one project in a region lead to less alternative projects in the specific region. (2. Organisational quality: It should be easy to see when and where cost overruns occur and who was responsible. There should be a well-developed knowledge management system in the organisation and an organisation culture of openness with a focus on improvements. (3. Organisational processes, e.g. a systematic use of external reviewers in different stages of a project.   Keywords: Cost overruns, Infrastructure projects, Policy measures

Financing end-use solar technologies in a restructured electricity industry: Comparing the cost of public policies

International Nuclear Information System (INIS)

Jones, E.; Eto, J.

1997-09-01

Renewable energy technologies are capital intensive. Successful public policies for promoting renewable energy must address the significant resources needed to finance them. Public policies to support financing for renewable energy technologies must pay special attention to interactions with federal, state, and local taxes. These interactions are important because they can dramatically increase or decrease the effectiveness of a policy, and they determine the total cost of a policy to society as a whole. This report describes a comparative analysis of the cost of public policies to support financing for two end-use solar technologies: residential solar domestic hot water heating (SDHW) and residential rooftop photovoltaic (PV) systems. The analysis focuses on the cost of the technologies under five different ownership and financing scenarios. Four scenarios involve leasing the technologies to homeowners in return for a payment that is determined by the financing requirements of each form of ownership. For each scenario, the authors examine nine public policies that might be used to lower the cost of these technologies: investment tax credits (federal and state), production tax credits (federal and state), production incentives, low-interest loans, grants (taxable and two types of nontaxable), direct customer payments, property and sales tax reductions, and accelerated depreciation

Quantifying the properties of low-cost powder metallurgy titanium alloys

International Nuclear Information System (INIS)

Bolzoni, L.; Ruiz-Navas, E.M.; Gordo, E.

2017-01-01

The extensive industrial employment of titanium is hindered by its high production costs where reduction of these costs can be achieved using cheap alloying elements and appropriate alternative processing techniques. In this work the feasibility of the production of low-cost titanium alloys is addressed by adding steel to pure titanium and processing the alloys by powder metallurgy. In particular, a spherical 4140 LCH steel powder commonly used in metal injection moulding is blended with irregular hydride-dehydride Ti. The new low-cost alloys are cold uniaxially pressed and sintered under high vacuum and show comparable properties to other wrought-equivalent and powder metallurgy titanium alloys. Differential thermal analysis and X-ray diffraction analyses confirm that Ti can tolerate the employment of iron as primary alloying element without forming detrimental TiFe-based intermetallic phases. Thus, the newly designed α+β alloys could be used for cheaper non-critical components.

Quantifying the properties of low-cost powder metallurgy titanium alloys

Energy Technology Data Exchange (ETDEWEB)

Bolzoni, L., E-mail: bolzoni.leandro@gmail.com [WaiCAM (Waikato Centre for Advanced Materials), The University of Waikato, Private Bag 3105, 3240 Hamilton (New Zealand); Ruiz-Navas, E.M.; Gordo, E. [Department of Materials Science and Engineering, University Carlos III of Madrid, Avda. de la Universidad, 30, 28911 Leganés, Madrid (Spain)

2017-02-27

The extensive industrial employment of titanium is hindered by its high production costs where reduction of these costs can be achieved using cheap alloying elements and appropriate alternative processing techniques. In this work the feasibility of the production of low-cost titanium alloys is addressed by adding steel to pure titanium and processing the alloys by powder metallurgy. In particular, a spherical 4140 LCH steel powder commonly used in metal injection moulding is blended with irregular hydride-dehydride Ti. The new low-cost alloys are cold uniaxially pressed and sintered under high vacuum and show comparable properties to other wrought-equivalent and powder metallurgy titanium alloys. Differential thermal analysis and X-ray diffraction analyses confirm that Ti can tolerate the employment of iron as primary alloying element without forming detrimental TiFe-based intermetallic phases. Thus, the newly designed α+β alloys could be used for cheaper non-critical components.

Alternative Policy Study: Environment and energy in Europe and Central Asia 1990-2010. Energy-related environmental impacts of policy scenarios GEO-2000 alternative policy study

NARCIS (Netherlands)

Vuuren DP van; Bakkes JA; United Nations Environment; MNV

2000-01-01

The GEO-2000 study into alternative policy options for Europe and Central Asia focuses on energy use as an important driver for environmental problems across the region. The problems analyzed are climate change, acidification, summer smog, urban air pollution and risks of reactor accidents

Resource acquisition policy: Multiple account evaluation of electricity resource alternatives [and] resource acquisition strategy

International Nuclear Information System (INIS)

1994-06-01

British Columbia Hydro has been directed by the provincial government to develop evaluation procedures to rank electricity resource alternatives in terms of their social benefits and costs, and to acquire resources on the basis of need. The current state of development of social costing at BC Hydro is detailed along with its application to the multiple account evaluation of resources. In this evaluation, BC Hydro's corporate costs, customer cost, transfer payments to the province, direct costs incurred by provincial or regional governments or other Crown agences, direct environmental impact costs from air emissions and land/water use, community and social impact costs, and economic development impacts are taken into account. The BC Hydro resource acquisition strategy is also described as it was developed in response to provincial policy on electricity supply from independent power producers. This strategy includes a determination of need, a decision to acquire need-determined resources either by itself or from a private sector developer, and decisions to acquire resources in advance of need for reasons such as economic opportunity, long-term strategies, or load displacement. Background information is included on calculation of air emissions costs. An illustrative example is provided of the multiple account evaluation of several types of resource projects. 1 fig., 5 tabs

Cost effectiveness of GHG mitigation options and policy implication

Energy Technology Data Exchange (ETDEWEB)

Lim, K. S. [Korea Institute for Industrial Economics and Trade, Seoul (Korea, Republic of)

1998-04-01

This paper represents the summary findings and conclusions of several studies implemented about microeconomics and macroeconomics marginal costs of GHG abatement policies. Financial, economic, and, where possible, environmental microeconomics costs of reducing GHGs are estimated by a World Bank team. Six energy-related CO{sub 2} mitigation policy options are applied to estimate the macroeconomics costs of GHG emission reduction, the macroeconomics impacts on the Chinese economy. In terms of policy, conservation is a better option to cope with a restrictive mitigation constraint, assuming a developing country can achieve planned energy-saving targets. Without a CO{sub 2} emission constraint or with less restrictive CO{sub 2} emission constraints, however, the simulation results indicate that a conservation strategy may be less attractive than fuel substitution in a developing country, mainly due to the economic dampening effect of reduced production in the energy sectors. This finding suggests that an often-cited costless or negative-cost energy conservation policy may not be a better option when a less restrictive mitigation target is in force. This does not mean that the potential for energy efficiency improvements in a developing country is not worthwhile, but that the overall macroeconomics impacts should be considered before implementing the policy option. (author). 9 refs., 3 figs., 3 tabs.

Ship Compliance in Emission Control Areas: Technology Costs and Policy Instruments.

Science.gov (United States)

Carr, Edward W; Corbett, James J

2015-08-18

This paper explores whether a Panama Canal Authority pollution tax could be an effective economic instrument to achieve Emission Control Area (ECA)-like reductions in emissions from ships transiting the Panama Canal. This tariff-based policy action, whereby vessels in compliance with International Maritime Organisation (IMO) ECA standards pay a lower transit tariff than noncompliant vessels, could be a feasible alternative to petitioning for a Panamanian ECA through the IMO. A $4.06/container fuel tax could incentivize ECA-compliant emissions reductions for nearly two-thirds of Panama Canal container vessels, mainly through fuel switching; if the vessel(s) also operate in IMO-defined ECAs, exhaust-gas treatment technologies may be cost-effective. The RATES model presented here compares current abatement technologies based on hours of operation within an ECA, computing costs for a container vessel to comply with ECA standards in addition to computing the Canal tax that would reduce emissions in Panama. Retrofitted open-loop scrubbers are cost-effective only for vessels operating within an ECA for more than 4500 h annually. Fuel switching is the least-cost option to industry for vessels that operate mostly outside of ECA regions, whereas vessels operating entirely within an ECA region could reduce compliance cost with exhaust-gas treatment technology (scrubbers).

Sources and Transportation of Bulk, Low-Cost Lunar Simulant Materials

Science.gov (United States)

Rickman, D. L.

2013-01-01

Marshall Space Flight Center (MSFC) has built the Lunar Surface Testbed using 200 tons of volcanic cinder and ash from the same source used for the simulant series JSC-1. This Technical Memorandum examines the alternatives examined for transportation and source. The cost of low-cost lunar simulant is driven by the cost of transportation, which is controlled by distance and, to a lesser extent, quantity. Metabasalts in the eastern United States were evaluated due to their proximity to MSFC. Volcanic cinder deposits in New Mexico, Colorado, and Arizona were recognized as preferred sources. In addition to having fewer green, secondary minerals, they contain vesicular glass, both of which are desirable. Transportation costs were more than 90% of the total procurement costs for the simulant material.

Cheese whey: A cost-effective alternative for hyaluronic acid production by Streptococcus zooepidemicus.

Science.gov (United States)

Amado, Isabel R; Vázquez, José A; Pastrana, Lorenzo; Teixeira, José A

2016-05-01

This study focuses on the optimisation of cheese whey formulated media for the production of hyaluronic acid (HA) by Streptococcus zooepidemicus. Culture media containing whey (W; 2.1g/L) or whey hydrolysate (WH; 2.4 g/L) gave the highest HA productions. Both W and WH produced high yields on protein consumed, suggesting cheese whey is a good nitrogen source for S. zooepidemicus production of HA. Polysaccharide concentrations of 4.0 g/L and 3.2g/L were produced in W and WH in a further scale-up to 5L bioreactors, confirming the suitability of the low-cost nitrogen source. Cheese whey culture media provided high molecular weight (>3000 kDa) HA products. This study revealed replacing the commercial peptone by the low-cost alternative could reduce HA production costs by up to a 70% compared to synthetic media. Copyright © 2015 Elsevier Ltd. All rights reserved.

10 CFR 503.32 - Lack of alternate fuel supply at a cost which does not substantially exceed the cost of using...

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Lack of alternate fuel supply at a cost which does not... (CONTINUED) ALTERNATE FUELS NEW FACILITIES Permanent Exemptions for New Facilities § 503.32 Lack of alternate... alternate fuel supply at a cost which does not substantially exceed the cost of using imported petroleum. To...

The economics of gasoline subsidy cost reduction policy: Case study of Indonesia

Science.gov (United States)

Akimaya, Muhammad I.

A gasoline subsidy distorts the gasoline market with the resulting inefficiencies and takes substantial revenues that arguably could be spent elsewhere with a better impact on economic growth. Governments with such subsidies are aware of their cost yet face difficulties in removing the policy because of strong resistance from the public. This thesis discusses in three essays the problem faced by the government in removing the gasoline subsidy and provides an alternative policy in reducing the subsidy cost applied to the case of Indonesia. In the first essay, we examine the decision-making process from the government's perspective that has an objective of generating savings to fund other programs while maintaining political power, and the influence that the general population has over the decision. Despite the immense literature on political power, there has yet to be any research that mathematically models the decision-making process of a government with influences from the general population. Under the benchmark scenario, the equilibrium strategy is to keep the subsidy intact. However, the results are found to be very sensitive to the magnitude of the shift in political power as well as the preferences of both the government and the people. In the second essay, we estimate the cross-price elasticity of regular gasoline with respect to premium gasoline price. The importance of such knowledge is to accurately determine the impact of fuel pricing policy that tends to have different rates of tax or subsidy depending on the grade of gasoline. Using data on the Mexican gasoline market, regular gasoline demand is estimated with an Autoregressive Distributed Lag (ARDL) model. Endogeneity of the price and structural break are also investigated. The cross-price elasticities between regular and premium gasoline is found to be -0.895, which confirms high substitutability among gasoline with different grades. In the third essay, we look at the unique case of Indonesia that

The Finnish power market: Are imports from Russia low-cost?

International Nuclear Information System (INIS)

Ochoa, Camila; Gore, Olga

2015-01-01

Electricity market integration of high- and low-price areas is expected to bring benefits to the consumers in a high-price area. However, these potential benefits are highly dependent on the market characteristics and the policy interventions. We use simulation to study the effects of different alternatives for the expansion and operation of the interconnector Finland–Russia on the Finnish market (a high-price area). Our results show that the current trading arrangement, where a single trader owns the transmission rights, and limits the trade during peak hours to avoid capacity charges in Russia, is beneficial for Finland at the current interconnection capacity. However, if the interconnector is expanded, the behaviour of the trader would create significant distortions in the Finnish market. We also analyse the pros and cons of maintaining a strategic reserve in Finland in combination with the different scenarios of interconnection expansion and trading arrangements. We conclude that in the absence of trust in imports, the need for a strategic reserve is undeniable. This will slightly reduce the economic benefits of integration for Finnish consumers, but it will significantly improve reliability. - Highlights: • We model the likely long-term dynamics of the interconnection Finland–Russia. • Different cross-border arrangements and capacity adequacy policies are considered. • Discriminatory access to the interconnector undermines the benefits of integration. • Market coupling reduces supply costs but creates reliability concerns. • Keeping a strategic reserve reduces the benefits of market coupling

Economic and market issues on the sustainability of egg production in the United States: analysis of alternative production systems.

Science.gov (United States)

Sumner, D A; Gow, H; Hayes, D; Matthews, W; Norwood, B; Rosen-Molina, J T; Thurman, W

2011-01-01

Conventional cage housing for laying hens evolved as a cost-effective egg production system. Complying with mandated hen housing alternatives would raise marginal production costs and require sizable capital investment. California data indicate that shifts from conventional cages to barn housing would likely cause farm-level cost increases of about 40% per dozen. The US data on production costs of such alternatives as furnished cages are not readily available and European data are not applicable to the US industry structure. Economic analysis relies on key facts about production and marketing of conventional and noncage eggs. Even if mandated by government or buyers, shifts to alternative housing would likely occur with lead times of at least 5 yr. Therefore, egg producers and input suppliers would have considerable time to plan new systems and build new facilities. Relatively few US consumers now pay the high retail premiums required for nonconventional eggs from hens housed in alternative systems. However, data from consumer experiments indicate that additional consumers would also be willing to pay some premium. Nonetheless, current data do not allow easy extrapolation to understand the willingness to pay for such eggs by the vast majority of conventional egg consumers. Egg consumption in the United States tends to be relatively unresponsive to price changes, such that sustained farm price increases of 40% would likely reduce consumption by less than 10%. This combination of facts and relationships suggests that, unless low-cost imports grew rapidly, requirements for higher cost hen housing systems would raise US egg prices considerably while reducing egg consumption marginally. Eggs are a low-cost source of animal protein and low-income consumers would be hardest hit. However, because egg expenditures are a very small share of the consumer budget, real income loss for consumers would be small in percentage terms. Finally, the high egg prices imposed by

Modeling cost-effectiveness and health gains of a "universal" versus "prioritized" hepatitis C virus treatment policy in a real-life cohort.

Science.gov (United States)

Kondili, Loreta A; Romano, Federica; Rolli, Francesca Romana; Ruggeri, Matteo; Rosato, Stefano; Brunetto, Maurizia Rossana; Zignego, Anna Linda; Ciancio, Alessia; Di Leo, Alfredo; Raimondo, Giovanni; Ferrari, Carlo; Taliani, Gloria; Borgia, Guglielmo; Santantonio, Teresa Antonia; Blanc, Pierluigi; Gaeta, Giovanni Battista; Gasbarrini, Antonio; Chessa, Luchino; Erne, Elke Maria; Villa, Erica; Ieluzzi, Donatella; Russo, Francesco Paolo; Andreone, Pietro; Vinci, Maria; Coppola, Carmine; Chemello, Liliana; Madonia, Salvatore; Verucchi, Gabriella; Persico, Marcello; Zuin, Massimo; Puoti, Massimo; Alberti, Alfredo; Nardone, Gerardo; Massari, Marco; Montalto, Giuseppe; Foti, Giuseppe; Rumi, Maria Grazia; Quaranta, Maria Giovanna; Cicchetti, Americo; Craxì, Antonio; Vella, Stefano

2017-12-01

We evaluated the cost-effectiveness of two alternative direct-acting antiviral (DAA) treatment policies in a real-life cohort of hepatitis C virus-infected patients: policy 1, "universal," treat all patients, regardless of fibrosis stage; policy 2, treat only "prioritized" patients, delay treatment of the remaining patients until reaching stage F3. A liver disease progression Markov model, which used a lifetime horizon and health care system perspective, was applied to the PITER cohort (representative of Italian hepatitis C virus-infected patients in care). Specifically, 8,125 patients naive to DAA treatment, without clinical, sociodemographic, or insurance restrictions, were used to evaluate the policies' cost-effectiveness. The patients' age and fibrosis stage, assumed DAA treatment cost of €15,000/patient, and the Italian liver disease costs were used to evaluate quality-adjusted life-years (QALY) and incremental cost-effectiveness ratios (ICER) of policy 1 versus policy 2. To generalize the results, a European scenario analysis was performed, resampling the study population, using the mean European country-specific health states costs and mean treatment cost of €30,000. For the Italian base-case analysis, the cost-effective ICER obtained using policy 1 was €8,775/QALY. ICERs remained cost-effective in 94%-97% of the 10,000 probabilistic simulations. For the European treatment scenario the ICER obtained using policy 1 was €19,541.75/QALY. ICER was sensitive to variations in DAA costs, in the utility value of patients in fibrosis stages F0-F3 post-sustained virological response, and in the transition probabilities from F0 to F3. The ICERs decrease with decreasing DAA prices, becoming cost-saving for the base price (€15,000) discounts of at least 75% applied in patients with F0-F2 fibrosis. Extending hepatitis C virus treatment to patients in any fibrosis stage improves health outcomes and is cost-effective; cost-effectiveness significantly increases

Alleviating inequality in climate policy costs: an integrated perspective on mitigation, damage and adaptation

Science.gov (United States)

De Cian, E.; Hof, A. F.; Marangoni, G.; Tavoni, M.; van Vuuren, D. P.

2016-07-01

Equity considerations play an important role in international climate negotiations. While policy analysis has often focused on equity as it relates to mitigation costs, there are large regional differences in adaptation costs and the level of residual damage. This paper illustrates the relevance of including adaptation and residual damage in equity considerations by determining how the allocation of emission allowances would change to counteract regional differences in total climate costs, defined as the costs of mitigation, adaptation, and residual damage. We compare emission levels resulting from a global carbon tax with two allocations of emission allowances under a global cap-and-trade system: one equating mitigation costs and one equating total climate costs as share of GDP. To account for uncertainties in both mitigation and adaptation, we use a model-comparison approach employing two alternative modeling frameworks with different damage, adaptation cost, and mitigation cost estimates, and look at two different climate goals. Despite the identified model uncertainties, we derive unambiguous results on the change in emission allowance allocation that could lessen the unequal distribution of adaptation costs and residual damages through the financial transfers associated with emission trading.

Alternatives to control subsidence at low-level radioactive waste burial sites

International Nuclear Information System (INIS)

Phillips, S.J.; Carlson, R.A.

1981-09-01

A substantial quantity of low-level radioactive and hazardous wastes has been interred in shallow land burial structures throughout the United States. Many of these structures (trenches, pits, and landfills) have experienced geotechnical subsidence problems and may require stabilization. Ground surface manifestations of subsidence include: large cracks, basins, and cave-ins. Subsidence is primarily caused by void filling, and physicochemical degradation and solubilization of buried wastes. These surface features represent a potential for increased contamination transport to the biosphere via water, air, biologic, and direct pathways. Engineering alternatives for the reduction of buried waste and matrix materials voids are identified and discussed. The advantages, disadvantages, and costs of each alternative are evaluated. Falling mass, pile driving and in situ incineration engineering alternatives were selected for further development

Use of alternative dispute resolution--HHS. Notice of interim policy.

Science.gov (United States)

1992-10-27

The Department has developed an interim policy to address the use of alternative dispute resolution (ADR) as required by the Administrative Dispute Resolution Act (ADR Act), Public Law No. 101-552. This interim policy also responds to the Negotiated Rulemaking Act, Public Law No. 101-648, and relevant elements of the Executive Order on Civil Justice Reform (E.O. 12778). The Department is adopting an interim policy because we need a baseline of experience and knowledge from our own pilot activities and those of other agencies before finalizing a policy.

The Social Cost Of Electricity. Scenarios and Policy Implications

International Nuclear Information System (INIS)

Markandya, A.; Bigano, A.; Porchia, R.

2010-01-01

This book reports and rationalizes the state-of-the-art concerning the social costs of electricity generation. Social costs are assessed by adding to the private generation costs, the external costs associated with damages to human health, the environment, crops, materials, and those related to the consequences of climate change. The authors consider the evolution of these costs up to 2030 for major electricity generating technologies and, using these estimates, evaluate policy options for external cost internalization, providing quantitative scenarios by country and primary fuel for 2010, 2020 and 2030. While mainly focusing on European countries, the book also examines the situation in key emerging economies such as China, India, Brazil and Turkey. With an analysis of the policies for external costs internalization, this book will appeal to energy policymakers, research institutions focusing on energy, environmental and energy NGOs and trade associations, as well as energy companies.

Impacts of low-carbon power policy on carbon mitigation in Guangdong Province, China

International Nuclear Information System (INIS)

Cheng, Beibei; Dai, Hancheng; Wang, Peng; Xie, Yang; Chen, Li; Zhao, Daiqing; Masui, Toshihiko

2016-01-01

This paper analyzes the impacts of the low-carbon policy in the power sector of Guangdong Province in China on its energy and carbon emission targets by 2020, as well as their costs and co-benefits, using a regional CGE model with seven scenarios: business as usual (BaU), renewable energy (RE), renewable energy and natural gas (RE–NG), CAP only (CAP), CAP and RE–NG (CAP–RE–NG), carbon emission trading (ETS), and ETS with RE–NG (ETS–RE–NG). Analysis results reveal that provincial energy and carbon intensity targets can be achieved in the assumed carbon mitigation scenarios with carbon cap, ETS, and clean energy development policies. While the carbon constraint exerts negative impacts on the economy, GDP loss could be lowered by the ETS and RE policies. The RE scenario is more economically efficient than the ETS scenario, and coupling the RE and ETS scenarios appears to be the most economically efficient scenario to achieve the desired carbon and energy intensity targets. One of the benefits of the low-carbon policy is its improvement of the energy security of Guangdong in terms of reduced reliance on external coal and oil; in particular, Guangdong coal consumption could peak in 2017–2019. - Highlights: • This study analyzes the low carbon policy in the power sector in Guangdong of China. • The role of power sector in achieving carbon and energy intensity target is shown. • Renewable energy and natural gas are very important for Guangdong Province. • Additional efforts in other sectors are needed to achieve the intensity targets. • The mitigation cost and economic impacts are assessed under various policy settings.

Chemical gel barriers as low-cost alternative to containment and in situ cleanup of hazardous wastes to protect groundwater

International Nuclear Information System (INIS)

1997-01-01

Chemical gel barriers are being considered as a low-cost alternative for containment and in situ cleanup of hazardous wastes to protect groundwater. Most of the available gels in petroleum application are non-reactive and relative impermeable, providing a physical barriers for all fluids and contaminants. However, other potential systems can be envisioned. These systems could include gels that are chemically reactive and impermeable such that most phase are captured by the barriers but the contaminants could diffuse through the barriers. Another system that is chemically reactive and permeable could have potential applications in selectivity capturing contaminants while allowing water to pass through the barriers. This study focused on chemically reactive and permeable gel barriers. The gels used in experiment are DuPont LUDOX SM colloidal silica gel and Pfizer FLOPAAM 1330S hydrolyzed polyacrylamide (HPAM) gel

Cost-effectiveness of public-health policy options in the presence of pretreatment NNRTI drug resistance in sub-Saharan Africa: a modelling study.

Science.gov (United States)

Phillips, Andrew N; Cambiano, Valentina; Nakagawa, Fumiyo; Revill, Paul; Jordan, Michael R; Hallett, Timothy B; Doherty, Meg; De Luca, Andrea; Lundgren, Jens D; Mhangara, Mutsa; Apollo, Tsitsi; Mellors, John; Nichols, Brooke; Parikh, Urvi; Pillay, Deenan; Rinke de Wit, Tobias; Sigaloff, Kim; Havlir, Diane; Kuritzkes, Daniel R; Pozniak, Anton; van de Vijver, David; Vitoria, Marco; Wainberg, Mark A; Raizes, Elliot; Bertagnolio, Silvia

2018-03-01

There is concern over increasing prevalence of non-nucleoside reverse-transcriptase inhibitor (NNRTI) resistance in people initiating antiretroviral therapy (ART) in low-income and middle-income countries. We assessed the effectiveness and cost-effectiveness of alternative public health responses in countries in sub-Saharan Africa where the prevalence of pretreatment drug resistance to NNRTIs is high. The HIV Synthesis Model is an individual-based simulation model of sexual HIV transmission, progression, and the effect of ART in adults, which is based on extensive published data sources and considers specific drugs and resistance mutations. We used this model to generate multiple setting scenarios mimicking those in sub-Saharan Africa and considered the prevalence of pretreatment NNRTI drug resistance in 2017. We then compared effectiveness and cost-effectiveness of alternative policy options. We took a 20 year time horizon, used a cost effectiveness threshold of US$500 per DALY averted, and discounted DALYs and costs at 3% per year. A transition to use of a dolutegravir as a first-line regimen in all new ART initiators is the option predicted to produce the most health benefits, resulting in a reduction of about 1 death per year per 100 people on ART over the next 20 years in a situation in which more than 10% of ART initiators have NNRTI resistance. The negative effect on population health of postponing the transition to dolutegravir increases substantially with higher prevalence of HIV drug resistance to NNRTI in ART initiators. Because of the reduced risk of resistance acquisition with dolutegravir-based regimens and reduced use of expensive second-line boosted protease inhibitor regimens, this policy option is also predicted to lead to a reduction of overall programme cost. A future transition from first-line regimens containing efavirenz to regimens containing dolutegravir formulations in adult ART initiators is predicted to be effective and cost-effective in

The costs of production of alternative jet fuel: A harmonized stochastic assessment.

Science.gov (United States)

Bann, Seamus J; Malina, Robert; Staples, Mark D; Suresh, Pooja; Pearlson, Matthew; Tyner, Wallace E; Hileman, James I; Barrett, Steven

2017-03-01

This study quantifies and compares the costs of production for six alternative jet fuel pathways using consistent financial and technical assumptions. Uncertainty was propagated through the analysis using Monte Carlo simulations. The six processes assessed were HEFA, advanced fermentation, Fischer-Tropsch, aqueous phase processing, hydrothermal liquefaction, and fast pyrolysis. The results indicate that none of the six processes would be profitable in the absence of government incentives, with HEFA using yellow grease, HEFA using tallow, and FT revealing the lowest mean jet fuel prices at $0.91/liter ($0.66/liter-$1.24/liter), $1.06/liter ($0.79/liter-$1.42/liter), and $1.15/liter ($0.95/liter-$1.39/liter), respectively. This study also quantifies plant performance in the United States with a Renewable Fuel Standard policy analysis. Results indicate that some pathways could achieve positive NPV with relatively high likelihood under existing policy supports, with HEFA and FPH revealing the highest probability of positive NPV at 94.9% and 99.7%, respectively, in the best-case scenario. Copyright © 2016 Elsevier Ltd. All rights reserved.

Life-cycle private-cost-based competitiveness analysis of electric vehicles in China considering the intangible cost of traffic policies

International Nuclear Information System (INIS)

Diao, Qinghua; Sun, Wei; Yuan, Xinmei; Li, Lili; Zheng, Zhi

2016-01-01

Highlights: • LCCs of BEVs and CVs are compared, considering the effects of traffic policy. • BEVs are economically competitive with both national and local subsidies. • Traffic policies have a significant impact on the competitiveness of BEVs. • The promotion of electric vehicles should prioritize mega-cities. - Abstract: Electric vehicles produce zero tailpipe emissions during operation and have thus been considered a most promising method for providing mobility while reducing the greenhouse gas emissions of the transportation sector in the future. The life-cycle cost of electric vehicles has been widely studied to evaluate their competitiveness compared to conventional vehicles. However, the competitiveness of electric vehicles is highly dependent on government promotion policies, and the effects of non-economic incentive policies are currently difficult to include in life-cycle cost analysis. These non-economic effects are usually measured by the intangible cost. Traffic policies represent typical non-economic incentive policies. In China, electric vehicles are exempted from purchase restrictions (license plate control policy) and driving restrictions; thus, the intangible cost of traffic policies has significant effects on the comparison of electric vehicles and conventional vehicles. In this paper, from the consumers’ perspective, the intangible cost of purchase and driving restrictions is modeled and expressed in monetary terms; then, the impact of these non-economic incentive policies are compared with subsidies and other costs of vehicles. Thus, a more comprehensive comparison between electric and conventional vehicles can be provided. Using three selected typical battery electric vehicles and three correspondingly similarly sized conventional vehicles in China, the private life-cycle costs of battery electric vehicles and conventional vehicles are calculated and compared, a parametric variation analysis is performed, and the effects of economic

The net effect of alternative allocation ratios on recruitment time and trial cost.

Science.gov (United States)

Vozdolska, Ralitza; Sano, Mary; Aisen, Paul; Edland, Steven D

2009-04-01

Increasing the proportion of subjects allocated to the experimental treatment in controlled clinical trials is often advocated as a method of increasing recruitment rates and improving the performance of trials. The presumption is that the higher likelihood of randomization to the experimental treatment will be perceived by potential study enrollees as an added benefit of participation and will increase recruitment rates and speed the completion of trials. However, studies with alternative allocation ratios require a larger sample size to maintain statistical power, which may result in a net increase in time required to complete recruitment and a net increase in total trial cost. To describe the potential net effect of alternative allocation ratios on recruitment time and trial cost. Models of recruitment time and trial cost were developed and used to compare trials with 1:1 allocation to trials with alternative allocation ratios under a range of per subject costs, per day costs, and enrollment rates. In regard to time required to complete recruitment, alternative allocation ratios are net beneficial if the recruitment rate improves by more than about 4% for trials with a 1.5:1 allocation ratio and 12% for trials with a 2:1 allocation ratio. More substantial improvements in recruitment rate, 13 and 47% respectively for scenarios we considered, are required for alternative allocation to be net beneficial in terms of tangible monetary cost. The cost models were developed expressly for trials comparing proportions or means across treatment groups. Using alternative allocation ratio designs to improve recruitment may or may not be time and cost-effective. Using alternative allocation for this purpose should only be considered for trial contexts where there is both clear evidence that the alternative design does improve recruitment rates and the attained time or cost efficiency justifies the added study subject burden implied by a larger sample size.

Cost of Policy Inaction

International Nuclear Information System (INIS)

Bakkes, J.A.; Brauer, I.; Ten Brink, P.; Gorlach, B.; Kuik, O.J.; Medhurst, J.

2007-01-01

The objective of this study is to lay out reasonable expectations of COPI as an assessment instrument. This includes aspects such as potential messages; important technical issues; limitations; issues of focus, direction and process; key information gaps; added value. The scope of this study is environment policy at the EU level, touching on policy areas that are not labelled 'environment' but are nevertheless relevant to the issue of cost of policy non-action regarding the environment. The study reflects on methods to assess COPI in money terms but also considers non-monetary endpoints, such as the number of premature deaths. The study aims to illuminate which stages of the policy making process the concept of COPI can best support. Our interpretation of what DG ENV seeks, in relation to COPI, is: economic thinking, but not too narrow, as an element of a communication strategy. This led us to consider inter alia the possibilities to apply the COPI concept to environmental-related policy as a whole - next to, or contrasted with, other EU priorities. Realism has been an important consideration: this study tries to provide ideas to DG ENV for pragmatic use of the COPI concept. That requires a balance between, or a proper combination and sequencing of, the quick-and-simple and the thorough-but-costly. The study reflects on both and eventually recommends a combination of mostly smaller studies in four distinct categories. In view of this we included in this scoping study elements of COPI methodology that can be of practical use in designing and committing follow-up work. This includes a two-page methodological summary, a section on important design choices, a framework for a COPI program, populated with some examples of good topics for COPI studies that seem double. Although the production of this scoping study has been a small project, it was nevertheless undertaken by five organizations in order to connect with as much practical experience as possible. GHK experience

Efficacy of Low-Cost PC-Based Aviation Training Devices

Directory of Open Access Journals (Sweden)

Savern l Reweti

2017-03-01

Full Text Available Aim/Purpose: The aim of this study was to explore whether a full cost flight training device (FTD was significantly better for simulator training than a low cost PC-Based Aviation Training Device (PCATD. Background: A quasi-transfer study was undertaken to ascertain whether a Civil Aviation Authority certified Flight Training Device (FTD was more effective at improving pilot proficiency in the performance of a standard VFR traffic pattern (Overhead Rejoin Procedure than a customised low cost PCATD. Methodology: In this quasi-transfer study, a high fidelity FTD rather than an aircraft was used to test both training and transfer tasks. Ninety-three pilots were recruited to participate in the study. Contribution: The use of PCATDs is now well established for pilot training, especially for Instrument Flight Rules (IFR skills training. However, little substantive research has been undertaken to examine their efficacy for VFR training. Findings: There was no evidence of a pre-test/post-test difference in VFR task perfor-mance between participants trained on the PCATD and the FTD, when post tested on the FTD. The use of both PCATD and FTD demonstrated signifi-cant improvements in VFR task performance compared to a control group that received no PCATD or FTD training. Recommendations for Practitioners\t: We discuss the possibility that low cost PCATDs may be a viable alternative for flight schools wishing to use a flight simulator but not able to afford a FTD. Recommendation for Researchers: We discuss the introduction of improved low cost technologies that allow PCATDs to be used more effectively for training in VFR procedures. The development and testing of new technologies requires more research. Impact on Society: Flight training schools operate in a difficult economic environment with continued increases in the cost of aircraft maintenance, compliance costs, and aviation fuel. The increased utilisation of low cost PCATD’s especially for VFR

Cost benefit and risk assessment for selected tank waste process testing alternatives

International Nuclear Information System (INIS)

Gasper, K.A.

1995-01-01

The US Department of Energy has established the Tank Waste Remediation System (TWRS) program to safely manage wastes currently stored in underground tank at the Hanford Site. A TWRS testing and development strategy was recently developed to define long-range TWRS testing plans. The testing and development strategy considered four alternatives. The primary variable in the alternatives is the level of pilot-scale testing involving actual waste. This study evaluates the cost benefit and risks associated with the four alternatives. Four types of risk were evaluated: programmatic schedule risk, process mishap risk, worker risk, and public health risk. The structure of this report is as follows: Section 1 introduces the report subject; Section 2 describes the test strategy alternative evaluation; Section 3 describes the approach used in this study to assess risk and cost benefit; Section 4 describes the assessment methodologies for costs and risks; Section 5 describes the bases and assumptions used to estimate the costs and risks; Section 6 presents the detailed costs and risks; and Section 7 describes the results of the cost benefit analysis and presents conclusions

The cost of policy simplification in conservation incentive programs

DEFF Research Database (Denmark)

Armsworth, Paul R.; Acs, Szvetlana; Dallimer, Martin

2012-01-01

of biodiversity. Common policy simplifications result in a 49100% loss in biodiversity benefits depending on the conservation target chosen. Failure to differentiate prices for conservation improvements in space is particularly problematic. Additional implementation costs that accompany more complicated policies......Incentive payments to private landowners provide a common strategy to conserve biodiversity and enhance the supply of goods and services from ecosystems. To deliver cost-effective improvements in biodiversity, payment schemes must trade-off inefficiencies that result from over-simplified policies...... with the administrative burden of implementing more complex incentive designs. We examine the effectiveness of different payment schemes using field parameterized, ecological economic models of extensive grazing farms. We focus on profit maximising farm management plans and use bird species as a policy-relevant indicator...

Decision Analysis and Policy Formulation for Technology-Specific Renewable Energy Targets

Science.gov (United States)

Okioga, Irene Teshamulwa

This study establishes a decision making procedure using Analytic Hierarchy Process (AHP) for a U.S. national renewable portfolio standard, and proposes technology-specific targets for renewable electricity generation for the country. The study prioritizes renewable energy alternatives based on a multi-perspective view: from the public, policy makers, and investors' points-of-view, and uses multiple criteria for ranking the alternatives to generate a unified prioritization scheme. During this process, it considers a 'quadruple bottom-line' approach (4P), i.e. reflecting technical "progress", social "people", economic 'profits", and environmental "planet" factors. The AHP results indicated that electricity generation from solar PV ranked highest, and biomass energy ranked lowest. A "Benefits/Cost Incentives/Mandates" (BCIM) model was developed to identify where mandates are needed, and where incentives would instead be required to bring down costs for technologies that have potential for profitable deployment. The BCIM model balances the development of less mature renewable energy technologies, without the potential for rising near-term electricity rates for consumers. It also ensures that recommended policies do not lead to growth of just one type of technology--the "highest-benefit, least-cost" technology. The model indicated that mandates would be suited for solar PV, and incentives generally for geothermal and concentrated solar power. Development for biomass energy, as a "low-cost, low-benefits" alternative was recommended at a local rather than national level, mainly due to its low resource potential values. Further, biomass energy generated from wastewater treatment plants (WWTPs) had the least resource potential compared to other biomass sources. The research developed methodologies and recommendations for biogas electricity targets at WWTPs, to take advantage of the waste-to-energy opportunities.

What are the costs of Scotland's climate and renewable policies?

International Nuclear Information System (INIS)

Anandarajah, Gabrial; McDowall, Will

2012-01-01

The UK government has established ambitious policies to address climate change and promote renewable energy, and has set targets both for reducing carbon emissions and for deploying renewables. Scotland, a constituent nation of the UK, has also set its own targets for climate change mitigation and renewable electricity. This paper analyses the energy, economic and environmental implications of carbon and renewable electricity targets in Scotland and the UK using a newly developed two-region UK MARKAL energy system model, where Scotland (SCT) and rest of the UK (RUK) are the two regions. The paper shows that meeting Scotland's carbon targets does not require additional decarbonisation effort if the UK meets its own targets at least cost; and that Scotland's renewable energy ambitions do imply additional costs above the least cost path to the meeting the UK's obligations under the EU renewable energy directive. Meeting Scottish renewable electricity targets diverts investment and deployment in renewables from rest of the UK to Scotland. In addition to increased energy system cost, Scottish renewable electricity targets may also require early investment in new electricity transmission capacity between Scotland and rest of the UK. - Highlights: ► Scottish climate policy is less stringent than UK policy. ► Scottish targets would complement UK targets if UK policies fail to meet UK targets. ► The possible conclusion here is that Scottish carbon targets are unnecessary. ► Scottish renewable policy is more stringent than UK policy. ► As expected, this increased stringency leads to additional costs.

Estimates of the costs of Kyoto: Marrakesh versus the McKibbin-Wilcoxen blueprint

International Nuclear Information System (INIS)

McKibbin, Warwick J.; Wilcoxen, Peter J.

2004-01-01

In this paper, we update our earlier estimates of the cost of the Kyoto Protocol using the G-Cubed model, taking into account the new sink allowances from recent negotiations as well as allowing for multiple gases and new land clearing estimates. We then compare the protocol to an alternative policy outlined in McKibbin et al. (Brookings Policy Brief, No. 17. June, The Brookings Institution, Washington, 1997; Climate Change Policy After Kyoto: A Blueprint for a Realistic Approach, The Brookings Institution, Washington, 2002a; J. Econom. Perspect. 16(2) (2002b) 107) that does not impose rigid emissions targets. We focus particular attention on the sensitivity of compliance costs under each policy to unexpected changes in future economic conditions. To illustrate the issue, we evaluate the policies under two plausible alternative assumptions about a single aspect of the future world economy: the rate of productivity growth in Russia. We find that moderate growth in Russia would raise the cost of the Kyoto Protocol by as much as 50 percent but would have little effect on the cost of the alternative policy. We conclude that the Kyoto Protocol is inherently unstable because unexpected future events could raise compliance costs substantially and place enormous pressure on governments to abrogate the agreement. The alternative policy would be far more stable because it does not subject future governments to adverse shocks in compliance costs

The cost of crime to society: new crime-specific estimates for policy and program evaluation.

Science.gov (United States)

McCollister, Kathryn E; French, Michael T; Fang, Hai

2010-04-01

Estimating the cost to society of individual crimes is essential to the economic evaluation of many social programs, such as substance abuse treatment and community policing. A review of the crime-costing literature reveals multiple sources, including published articles and government reports, which collectively represent the alternative approaches for estimating the economic losses associated with criminal activity. Many of these sources are based upon data that are more than 10 years old, indicating a need for updated figures. This study presents a comprehensive methodology for calculating the cost to society of various criminal acts. Tangible and intangible losses are estimated using the most current data available. The selected approach, which incorporates both the cost-of-illness and the jury compensation methods, yields cost estimates for more than a dozen major crime categories, including several categories not found in previous studies. Updated crime cost estimates can help government agencies and other organizations execute more prudent policy evaluations, particularly benefit-cost analyses of substance abuse treatment or other interventions that reduce crime. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.

The Effects of Forage Policy on Feed Costs in Korea

Directory of Open Access Journals (Sweden)

Jae Bong Chang

2018-05-01

Full Text Available Feeding operations are substantial on livestock farms, besides being potentially expensive. Feeding efficiency has been considered a major influence on profits in the livestock industry. Indeed, feed costs are shown to be the largest single item of production cost in Korea. To promote production and use of domestic forage, the Korean government has enforced the forage base expansion program that strengthens the competitiveness of the livestock industry by reducing the production cost. The forage base expansion program includes three main policies: subsidized forage production, support for processing and distribution, and expanding land for forage production. This paper investigates the influence of the government’s policies often conjectured to have pronounced effects on forage production. To evaluate the forage policies, this paper uses a path-analysis approach linking government spending on forage base expansion programs and feed costs. Results indicate that the Korean government’s spending on supporting domestic forage production results in a decrease in the ratio of forage expenses to total feed cost.

The role of large scale storage in a GB low carbon energy future: Issues and policy challenges

International Nuclear Information System (INIS)

Gruenewald, Philipp; Cockerill, Tim; Contestabile, Marcello; Pearson, Peter

2011-01-01

Large scale storage offers the prospect of capturing and using excess electricity within a low carbon energy system, which otherwise might have to be wasted. Incorporating the role of storage into current scenario tools is challenging, because it requires high temporal resolution to reflect the effects of intermittent sources on system balancing. This study draws on results from a model with such resolution. It concludes that large scale storage could become economically viable for scenarios with high penetration of renewables. As the proportion of intermittent sources increases, the optimal type of storage shifts towards solutions with low energy related costs, even at the expense of efficiency. However, a range of uncertainties have been identified, concerning storage technology development, the regulatory environment, alternatives to storage and the stochastic uncertainty of year-on-year revenues. All of these negatively affect the cost of finance and the chances of successful market uptake. We argue, therefore, that, if the possible wider system and social benefits from the presence of storage are to be achieved, stronger and more strategic policy support may be necessary. More work on the social and system benefits of storage is needed to gauge the appropriate extent of support measures. - Highlights: → Time resolved modelling shows future potential for large scale power storage in GB. → The value of storage is highly sensitive to a range of parameters. → Uncertainty over the revenue from storage could pose a barrier to investment. → To realise wider system benefits stronger and more strategic policy support may be necessary.

The efficiency cost of protective measures in climate policy

International Nuclear Information System (INIS)

Böhringer, Christoph; Garcia-Muros, Xaquin; Cazcarro, Ignacio; Arto, Iñaki

2017-01-01

Despite recent achievements towards a global climate agreement, climate action to reduce greenhouse gas emissions remains quite heterogeneous across countries. Energy-intensive and trade-exposed (EITE) industries in industrialized countries are concerned on stringent domestic emission pricing that puts them at a competitive disadvantage against producers of similar goods in other countries with more lenient emission regulation. This paper focuses on climate policy design in the United States of America (US) and compares the economic implications of four alternative protective measures for US EITE industries: (i) output-based rebates, (ii) exemptions from emission pricing, (iii) energy intensity standards, and (iv) carbon intensity standards. Using a large-scale computable general equilibrium model we quantify how these protective measures affect competitiveness of US EITE industries. We find that protective measures can improve common trade-related competitiveness indicators such as revealed comparative advantage or relative world trade shares but at the same time may lead to a decline in the output value for EITE industries because of negative income effects. The economy-wide cost of emission abatement under protective measures increase as compared to uniform emission pricing stand-alone such that the gains of protective measures for EITE exports may be more than compensated through losses in domestic EITE demand. - Highlights: • We assess impacts for US emission-intensive and trade-exposed (EITE) industries. • EITE impacts are quantified via competitiveness metrics and production output. • Protective measures reduce adverse competitiveness impacts but can depress output. • Output losses are due to negative income effects that reduce domestic EITE demand. • Protective measures run the risk of making US climate policy much more costly.

Decommissioning nuclear power plants. Policies, strategies and costs

International Nuclear Information System (INIS)

2003-01-01

The decommissioning of nuclear power plants is a topic of increasing interest to governments and the industry as many nuclear units approach retirement. It is important in this context to assess decommissioning costs and to ensure that adequate funds are set aside to meet future financial liabilities arising after nuclear power plants are shut down. Furthermore, understanding how national policies and industrial strategies affect those costs is essential for ensuring the overall economic effectiveness of the nuclear energy sector. This report, based upon data provided by 26 countries and analysed by government and industry experts, covers a variety of reactor types and sizes. The findings on decommissioning cost elements and driving factors in their variance will be of interest to analysts and policy makers in the nuclear energy field. (author)

The Low Cost Airline Consumer Price Sensitivity. An Investigation on The Mediating Role of Promotion and Trust in Brand

Directory of Open Access Journals (Sweden)

Janfry Sihite

2014-12-01

Full Text Available The ASEAN Open Sky Policy is one of ASEAN policy to open the airspace between the ASEAN member countries. Aviation services based companies including the Low Cost airlines will experience tight com-petition among ASEAN airline companies. This research aim to explore the effect of price on customer loyalty through the mediating role of promotion and trust in brand. The original sample collected from 100 Indonesian low-cost airline Citilink consumer that just arrived in Soekarno-Hatta International Airport, the bootstrapped techniques conducted for 500 sub-samples and further analyzed with structural equation modelling partial least square. The research findings support the low cost airline consumer price sensitivity, furthermore price affect the trust in brand more severe compared with the promotion. Price effect fully mediated through the trust in brand and promotion toward the consumer loyalty. Further research should consider the sensitivity of price to elaborate the decision making process for the low cost air-line consumer.

The Low Cost Airline Consumer Price Sensitivity. An Investigation on The Mediating Role of Promotion and Trust in Brand

Directory of Open Access Journals (Sweden)

Janfry Sihite

2014-12-01

Full Text Available The ASEAN Open Sky Policy is one of ASEAN policy to open the airspace between the ASEAN member countries. Aviation services based companies including the Low Cost airlines will experience tight com-petition among ASEAN airline companies. This research aim to explore the effect of price on customer loyalty through the mediating role of promotion and trust in brand. The original sample collected from 100 Indonesian low-cost airline Citilink consumer that just arrived in Soekarno-Hatta International Airport, the bootstrapped techniques conducted for 500 sub-samples and further analyzed with structural equation modelling partial least square. The research findings support the low cost airline consumer price sensitivity, furthermore price affect the trust in brand more severe compared with the promotion. Price effect fully mediated through the trust in brand and promotion toward the consumer loyalty. Further research should consider the sensitivity of price to elaborate the decision making process for the low cost airline consumer.

75 FR 49508 - Recovery Policy, RP9525.7, Labor Costs-Emergency Work

Science.gov (United States)

2010-08-13

...] Recovery Policy, RP9525.7, Labor Costs--Emergency Work AGENCY: Federal Emergency Management Agency, DHS... (FEMA) is accepting comments on RP9525.7, Labor Costs--Emergency Work. This is an existing policy that is scheduled for review to ensure that Recovery Directorate policies are up to date, incorporate...

Low-cost inertial measurement unit.

Energy Technology Data Exchange (ETDEWEB)

Deyle, Travis Jay

2005-03-01

Sandia National Laboratories performs many expensive tests using inertial measurement units (IMUs)--systems that use accelerometers, gyroscopes, and other sensors to measure flight dynamics in three dimensions. For the purpose of this report, the metrics used to evaluate an IMU are cost, size, performance, resolution, upgradeability and testing. The cost of a precision IMU is very high and can cost hundreds of thousands of dollars. Thus the goals and results of this project are as follows: (1) Examine the data flow in an IMU and determine a generic IMU design. (2) Discuss a high cost IMU implementation and its theoretically achievable results. (3) Discuss design modifications that would save money for suited applications. (4) Design and implement a low cost IMU and discuss its theoretically achievable results. (5) Test the low cost IMU and compare theoretical results with empirical results. (6) Construct a more streamlined printed circuit board design reducing noise, increasing capabilities, and constructing a self-contained unit. Using these results, we can compare a high cost IMU versus a low cost IMU using the metrics from above. Further, we can examine and suggest situations where a low cost IMU could be used instead of a high cost IMU for saving cost, size, or both.

Development and Flight Test of a Robust Optical-Inertial Navigation System Using Low-Cost Sensors

National Research Council Canada - National Science Library

Nielsen, Michael B

2008-01-01

.... This algorithm provides an alternative to the Global Positioning System (GPS) as a precision navigation source, enabling navigation in GPS denied environments, using low-cost sensors and equipment...

Cost-effectiveness of breast cancer screening policies using simulation.

Science.gov (United States)

Gocgun, Y; Banjevic, D; Taghipour, S; Montgomery, N; Harvey, B J; Jardine, A K S; Miller, A B

2015-08-01

In this paper, we study breast cancer screening policies using computer simulation. We developed a multi-state Markov model for breast cancer progression, considering both the screening and treatment stages of breast cancer. The parameters of our model were estimated through data from the Canadian National Breast Cancer Screening Study as well as data in the relevant literature. Using computer simulation, we evaluated various screening policies to study the impact of mammography screening for age-based subpopulations in Canada. We also performed sensitivity analysis to examine the impact of certain parameters on number of deaths and total costs. The analysis comparing screening policies reveals that a policy in which women belonging to the 40-49 age group are not screened, whereas those belonging to the 50-59 and 60-69 age groups are screened once every 5 years, outperforms others with respect to cost per life saved. Our analysis also indicates that increasing the screening frequencies for the 50-59 and 60-69 age groups decrease mortality, and that the average number of deaths generally decreases with an increase in screening frequency. We found that screening annually for all age groups is associated with the highest costs per life saved. Our analysis thus reveals that cost per life saved increases with an increase in screening frequency. Copyright © 2015 Elsevier Ltd. All rights reserved.

Systemic cost-effectiveness analysis of food hazard reduction

DEFF Research Database (Denmark)

Jensen, Jørgen Dejgård; Lawson, Lartey Godwin; Lund, Mogens

2015-01-01

stage are considered. Cost analyses are conducted for different risk reduction targets and for three alternative scenarios concerning the acceptable range of interventions. Results demonstrate that using a system-wide policy approach to risk reduction can be more cost-effective than a policy focusing...

Should a vehicle fuel economy standard be combined with an economy-wide greenhouse gas emissions constraint? Implications for energy and climate policy in the United States

International Nuclear Information System (INIS)

Karplus, Valerie J.; Paltsev, Sergey; Babiker, Mustafa; Reilly, John M.

2013-01-01

The United States has adopted fuel economy standards that require increases in the on-road efficiency of new passenger vehicles, with the goal of reducing petroleum use and (more recently) greenhouse gas (GHG) emissions. Understanding the cost and effectiveness of fuel economy standards, alone and in combination with economy-wide policies that constrain GHG emissions, is essential to inform coordinated design of future climate and energy policy. We use a computable general equilibrium model, the MIT Emissions Prediction and Policy Analysis (EPPA) model, to investigate the effect of combining a fuel economy standard with an economy-wide GHG emissions constraint in the United States. First, a fuel economy standard is shown to be at least six to fourteen times less cost effective than a price instrument (fuel tax) when targeting an identical reduction in cumulative gasoline use. Second, when combined with a cap-and-trade (CAT) policy, a binding fuel economy standard increases the cost of meeting the GHG emissions constraint by forcing expensive reductions in passenger vehicle gasoline use, displacing more cost-effective abatement opportunities. Third, the impact of adding a fuel economy standard to the CAT policy depends on the availability and cost of abatement opportunities in transport—if advanced biofuels provide a cost-competitive, low carbon alternative to gasoline, the fuel economy standard does not bind and the use of low carbon fuels in passenger vehicles makes a significantly larger contribution to GHG emissions abatement relative to the case when biofuels are not available. This analysis underscores the potentially large costs of a fuel economy standard relative to alternative policies aimed at reducing petroleum use and GHG emissions. It further emphasizes the need to consider sensitivity to vehicle technology and alternative fuel availability and costs as well as economy-wide responses when forecasting the energy, environmental, and economic outcomes of

The cost-effectiveness of alternative vaccination strategies for polyvalent meningococcal vaccines in Burkina Faso: A transmission dynamic modeling study.

Science.gov (United States)

Yaesoubi, Reza; Trotter, Caroline; Colijn, Caroline; Yaesoubi, Maziar; Colombini, Anaïs; Resch, Stephen; Kristiansen, Paul A; LaForce, F Marc; Cohen, Ted

2018-01-01

The introduction of a conjugate vaccine for serogroup A Neisseria meningitidis has dramatically reduced disease in the African meningitis belt. In this context, important questions remain about the performance of different vaccine policies that target remaining serogroups. Here, we estimate the health impact and cost associated with several alternative vaccination policies in Burkina Faso. We developed and calibrated a mathematical model of meningococcal transmission to project the disability-adjusted life years (DALYs) averted and costs associated with the current Base policy (serogroup A conjugate vaccination at 9 months, as part of the Expanded Program on Immunization [EPI], plus district-specific reactive vaccination campaigns using polyvalent meningococcal polysaccharide [PMP] vaccine in response to outbreaks) and three alternative policies: (1) Base Prime: novel polyvalent meningococcal conjugate (PMC) vaccine replaces the serogroup A conjugate in EPI and is also used in reactive campaigns; (2) Prevention 1: PMC used in EPI and in a nationwide catch-up campaign for 1-18-year-olds; and (3) Prevention 2: Prevention 1, except the nationwide campaign includes individuals up to 29 years old. Over a 30-year simulation period, Prevention 2 would avert 78% of the meningococcal cases (95% prediction interval: 63%-90%) expected under the Base policy if serogroup A is not replaced by remaining serogroups after elimination, and would avert 87% (77%-93%) of meningococcal cases if complete strain replacement occurs. Compared to the Base policy and at the PMC vaccine price of US$4 per dose, strategies that use PMC vaccine (i.e., Base Prime and Preventions 1 and 2) are expected to be cost saving if strain replacement occurs, and would cost US$51 (-US$236, US$490), US$188 (-US$97, US$626), and US$246 (-US$53, US$703) per DALY averted, respectively, if strain replacement does not occur. An important potential limitation of our study is the simplifying assumption that all

A cost and operational effectiveness analysis of alternative anti-surface warfare platforms

OpenAIRE

Skinner, Walter Mark.

1993-01-01

Approved for public release; distribution is unlimited. A Cost and Operational Effectiveness Analysis (COEA) is performed for three alternative anti-surface warfare (ASUW) platforms that will conduct operations in multi-service regional scenarios. Estimated program costs, historical cost variances, and measures of operational effectiveness are determined for each COEA alternative, and service life extension effects are examined. The data is merged in a mixed-integer optimization model, MPA...

Department of defense environmental cleanup cost allowability policy. Master`s thesis

Energy Technology Data Exchange (ETDEWEB)

Murdock, J.M.

1994-12-01

The purpose of this thesis was to investigate the factors affecting the allowability determination of defense contractor environmental remediation costs. The primary objective of this thesis was to determine what policies and contracting cost principles the Department of Defense (DOD) should develop to address environmental costs in a consistent manner, providing a `single face` to industry. A secondary objective was to develop an audit framework and questions to allow for consistent policy analysis and application to a contractor`s proposed environmental remediation costs based upon the materiality of the situation. Background material was presented to show the amount and complexity of environmental regulations, the effects of current judicial decisions and DOD`s efforts to develop a consistent policy. Research material was provided from Congress, the General Accounting Office, DOD, defense contractors, California, Washington, industry associations and environmental protection coalitions. The researcher`s analysis of the material produced an environmental cost principle. This cost principle was applied to a current environmental claim, producing an audit framework and tailored list of cost and/or pricing data analysis, questions. Both the cost principle and audit framework are recommended for incorporation into DOD`s final environmental cost allowability decision.

Integrated care: a fresh perspective for international health policies in low and middle-income countries

Directory of Open Access Journals (Sweden)

Jean-Pierre Unger

2006-09-01

Full Text Available Purpose: To propose a social-and-democrat health policy alternative to the current neoliberal one. Context of case: The general failure of neoliberal health policies in low and middle-income countries justifies the design of an alternative to bring disease control and health care back in step with ethical principles and desired outcomes. Data sources: National policies, international programmes and pilot experiments—including those led by the authors—are examined in both scientific and grey literature. Case description: We call for the promotion of a publicly-oriented health sector as a cornerstone of such alternative policy. We define ‘publicly-oriented’ as opposed to ‘private-for-profit’ in terms of objectives and commitment, not of ownership. We classify development strategies for such a sector according to an organisation-based typology of health systems defined by Mintzberg. As such, strategies are adapted to three types of health systems: machine bureaucracies, professional bureaucracies and divisionalized forms. We describe avenues for family and community health and for hospital care. We stress social control at the peripheral level to increase accountability and responsiveness. Community-based, national and international sources are required to provide viable financing. Conclusions and discussion: Our proposed social-and-democrat health policy calls for networking, lobbying and training as a joint effort in which committed health professionals can lead the way.

Compensating the opportunity cost of forest functional zoning - two alternative options for the Romanian forest policy

Directory of Open Access Journals (Sweden)

Marian Drăgoi,

2010-09-01

Full Text Available An important challenge of the environmental policy is conceivingappropriate economic instruments able to account for the positive externalities provided by forest ecosystems. This issue is extremely important for implementing the provisions of the Romanian Forest Act, which states that forest owners shall be compensated for the opportunity costs of giving up harvesting operations due to various conservation purposes. The paper presents a statistical method based on analytical assessment of the effective forgone revenues brought about by banning the harvesting operations in 96 cases, each case being a distinctive forest management plan conceived for a large forest area, i.e. a production unit. Doing so, the scale effect has been taken into account because all legal provisions referring to forest management planning systems are focused on production units, considered the basic reference elements for sustainable forest management. The multiple regression function produced by the statistical analysis was turned into a simple formula allowing for a straightforward set up of the average compensation worth being paid per year and hectare. In order to better fetch the real opportunity cost paid for each hectare of protected forest, the algorithmwas further improved in order to account for the differences in stumpage residual value. Actually, the average compensation is differentiated onto five categories of hauling distances, using the same algorithm used by the National Forest Administration for differentiating the average reservation price established at national level on the ground of full-cost method stumpage pricing system.

Compensating the opportunity cost of forest functional zoning - two alternative options for the Romanian forest policy

Directory of Open Access Journals (Sweden)

Marian Drăgoi

2010-06-01

Full Text Available An important challenge of the environmental policy is conceiving appropriate economic instruments able to account for the positive externalities provided by forest ecosystems. This issue is extremely important for implementing the provisions of the Romanian Forest Act, which states that forest owners shall be compensated for the opportunity costs of giving up harvesting operations due to various conservation purposes. The paper presents a statistical method based on analytical assessment of the effective forgone revenues brought about by banning the harvesting operations in 96 cases, each case being a distinctive forest management plan conceived for a large forest area, i.e. a production unit. Doing so, the scale effect has been taken into account because all legal provisions referring to forest management planning systems are focused on production units, considered the basic reference elements for sustainable forest management. The multiple regression function produced by the statistical analysis was turned into a simple formula allowing for a straightforward set up of the average compensation worth being paid per year and hectare. In order to better fetch the real opportunity cost paid for each hectare of protected forest, the algorithm was further improved in order to account for the differences in stumpage residual value. Actually, the average compensation is differentiated onto five categories of hauling distances, using the same algorithm used by the National Forest Administration for differentiating the average reservation price established at national level on the ground of full-cost method stumpage pricing system. 

On the effect of downtime costs and budget constraint on preventive and replacement policies

International Nuclear Information System (INIS)

Pascual, R.; Meruane, V.; Rey, P.A.

2008-01-01

This work proposes a general approach to study and improve the effectiveness of the system with respect to its expected life-cycle cost rate. The model we propose considers a production system which is protected against demand fluctuations and failure occurrences with elements like stock piles, line and equipment redundancy, and the use of alternative production methods. These design policies allow to keep or minimize the effect on the nominal throughput, while corrective measures are taken. The system is also subject to an aging process which depends on the frequency and quality of preventive actions. Making decisions is difficult because of discontinuities in intervention and downtime costs and the limited budget. We present a non-linear mixed integer formulation that minimizes the expected overall cost rate with respect to repair, overhaul and replacement times and the overhaul improvement factor proposed in the literature. The model is deterministic and considers minimal repairs and imperfect overhauls. We illustrate its application with a case based on a known benchmark example

Disintegrated care: the Achilles heel of international health policies in low and middle-income countries

Directory of Open Access Journals (Sweden)

Jean-Pierre Unger

2006-09-01

Full Text Available Purpose: To review the evidence basis of international aid and health policy. Context of case: Current international aid policy is largely neoliberal in its promotion of commoditization and privatisation. We review this policy's responsibility for the lack of effectiveness in disease control and poor access to care in low and middle-income countries. Data sources: National policies, international programmes and pilot experiments are examined in both scientific and grey literature. Conclusions and discussion: We document how health care privatisation has led to the pool of patients being cut off from public disease control interventions—causing health care disintegration—which in turn resulted in substandard performance of disease control. Privatisation of health care also resulted in poor access. Our analysis consists of three steps. Pilot local contracting-out experiments are scrutinized; national health care records of Colombia and Chile, two countries having adopted contracting-out as a basis for health care delivery, are critically examined against Costa Rica; and specific failure mechanisms of the policy in low and middle-income countries are explored. We conclude by arguing that the negative impact of neoliberal health policy on disease control and health care in low and middle-income countries justifies an alternative aid policy to improve both disease control and health care.

Cost benefit analysis of two policy options for cannabis: status quo and legalisation.

Science.gov (United States)

Shanahan, Marian; Ritter, Alison

2014-01-01

To date there has been limited analysis of the economic costs and benefits associated with cannabis legalisation. This study redresses this gap. A cost benefit analysis of two cannabis policy options the status quo (where cannabis use is illegal) and a legalised-regulated option was conducted. A cost benefit analysis was used to value the costs and benefits of the two policies in monetary terms. Costs and benefits of each policy option were classified into five categories (direct intervention costs, costs or cost savings to other agencies, benefits or lost benefits to the individual or the family, other impacts on third parties, and adverse or spill over events). The results are expressed as a net social benefit (NSB). The mean NSB per annum from Monte Carlo simulations (with the 5 and 95 percentiles) for the status quo was $294.6 million AUD ($201.1 to $392.7 million) not substantially different from the $234.2 million AUD ($136.4 to $331.1 million) for the legalised-regulated model which excludes government revenue as a benefit. When government revenue is included, the NSB for legalised-regulated is higher than for status quo. Sensitivity analyses demonstrate the significant impact of educational attainment and wellbeing as drivers for the NSB result. Examining the percentiles around the two policy options, there appears to be no difference between the NSB for these two policy options. Economic analyses are essential for good public policy, providing information about the extent to which one policy is substantially economically favourable over another. In cannabis policy, for these two options this does not appear to be the case.

Cost benefit analysis of two policy options for cannabis: status quo and legalisation.

Directory of Open Access Journals (Sweden)

Marian Shanahan

Full Text Available AIMS: To date there has been limited analysis of the economic costs and benefits associated with cannabis legalisation. This study redresses this gap. A cost benefit analysis of two cannabis policy options the status quo (where cannabis use is illegal and a legalised-regulated option was conducted. METHOD: A cost benefit analysis was used to value the costs and benefits of the two policies in monetary terms. Costs and benefits of each policy option were classified into five categories (direct intervention costs, costs or cost savings to other agencies, benefits or lost benefits to the individual or the family, other impacts on third parties, and adverse or spill over events. The results are expressed as a net social benefit (NSB. FINDINGS: The mean NSB per annum from Monte Carlo simulations (with the 5 and 95 percentiles for the status quo was $294.6 million AUD ($201.1 to $392.7 million not substantially different from the $234.2 million AUD ($136.4 to $331.1 million for the legalised-regulated model which excludes government revenue as a benefit. When government revenue is included, the NSB for legalised-regulated is higher than for status quo. Sensitivity analyses demonstrate the significant impact of educational attainment and wellbeing as drivers for the NSB result. CONCLUSION: Examining the percentiles around the two policy options, there appears to be no difference between the NSB for these two policy options. Economic analyses are essential for good public policy, providing information about the extent to which one policy is substantially economically favourable over another. In cannabis policy, for these two options this does not appear to be the case.

75 FR 26270 - Environmental Planning and Historic Preservation Compliance Costs Policy; Environmental Planning...

Science.gov (United States)

2010-05-11

...] Environmental Planning and Historic Preservation Compliance Costs Policy; Environmental Planning and Historic... draft Environmental Planning and Historic Preservation Compliance Costs policy and a draft Environmental Planning and Historic Preservation Mitigation policy. DATES: Comments must be received by June 10, 2010...

Renewable electricity production costs-A framework to assist policy-makers' decisions on price support

International Nuclear Information System (INIS)

Dinica, Valentina

2011-01-01

Despite recent progress, the production costs for renewable electricity remain above those for conventional power. Expectations of continuous reductions in production costs, typically underpin governments' policies for financial support. They often draw on the technology-focused versions of the Experience Curve model. This paper discusses how national-contextual factors also have a strong influence on production costs, such as geographic, infrastructural, institutional, and resource factors. As technologies mature, and as they reach significant levels of diffusion nationally, sustained increases in production costs might be recorded, due to these nationally contextual factors, poorly accounted for in policy-making decisions for price support. The paper suggests an analytical framework for a more comprehensive understanding of production costs. Based on this, it recommends that the evolution of specific cost levels and factors be monitored to locate 'sources of changes'. The paper also suggests policy instruments that governments may use to facilitate cost decreases, whenever possible. The application of the framework is illustrated for the diffusion of wind power in Spain during the past three decades. - Highlights: → Models, frameworks for policy-making on price support for renewable electricity production costs. → Policy instruments to help reduce production costs. → Limits to the influence of policies of production costs reductions.

Application of low-cost adsorbents for dye removal--a review.

Science.gov (United States)

Gupta, V K; Suhas

2009-06-01

Dyes are an important class of pollutants, and can even be identified by the human eye. Disposal of dyes in precious water resources must be avoided, however, and for that various treatment technologies are in use. Among various methods adsorption occupies a prominent place in dye removal. The growing demand for efficient and low-cost treatment methods and the importance of adsorption has given rise to low-cost alternative adsorbents (LCAs). This review highlights and provides an overview of these LCAs comprising natural, industrial as well as synthetic materials/wastes and their application for dyes removal. In addition, various other methods used for dye removal from water and wastewater are also complied in brief. From a comprehensive literature review, it was found that some LCAs, in addition to having wide availability, have fast kinetics and appreciable adsorption capacities too. Advantages and disadvantages of adsorbents, favourable conditions for particular adsorbate-adsorbent systems, and adsorption capacities of various low-cost adsorbents and commercial activated carbons as available in the literature are presented. Conclusions have been drawn from the literature reviewed, and suggestions for future research are proposed.

Life cycle cost analysis of alternative vehicles and fuels in Thailand

International Nuclear Information System (INIS)

Goedecke, Martin; Therdthianwong, Supaporn; Gheewala, Shabbir H.

2007-01-01

High crude oil prices and pollution problems have drawn attention to alternative vehicle technologies and fuels for the transportation sector. The question is: What are the benefits/costs of these technologies for society? To answer this question in a quantitative way, a web-based model (http://vehiclesandfuels.memebot.com) has been developed to calculate the societal life cycle costs, the consumer life cycle costs and the tax for different vehicle technologies. By comparing these costs it is possible to draw conclusions about the social benefit and the related tax structure. The model should help to guide decisions toward optimality, which refers to maximum social benefit. The model was applied to the case of Thailand. The life cycle cost of 13 different alternative vehicle technologies in Thailand have been calculated and the tax structure analyzed

Cost-effectiveness of alternative conservation strategies with application to the Pacific leatherback turtle.

Science.gov (United States)

Gjertsen, Heidi; Squires, Dale; Dutton, Peter H; Eguchi, Tomoharu

2014-02-01

Although holistic conservation addressing all sources of mortality for endangered species or stocks is the preferred conservation strategy, limited budgets require a criterion to prioritize conservation investments. We compared the cost-effectiveness of nesting site and at-sea conservation strategies for Pacific leatherback turtles (Dermochelys coriacea). We sought to determine which conservation strategy or mix of strategies would produce the largest increase in population growth rate per dollar. Alternative strategies included protection of nesters and their eggs at nesting beaches in Indonesia, gear changes, effort restrictions, and caps on turtle takes in the Hawaiian (U.S.A.) longline swordfish fishery, and temporal and area closures in the California (U.S.A.) drift gill net fishery. We used a population model with a biological metric to measure the effects of conservation alternatives. We normalized all effects by cost to prioritize those strategies with the greatest biological effect relative to its economic cost. We used Monte Carlo simulation to address uncertainty in the main variables and to calculate probability distributions for cost-effectiveness measures. Nesting beach protection was the most cost-effective means of achieving increases in leatherback populations. This result creates the possibility of noncompensatory bycatch mitigation, where high-bycatch fisheries invest in protecting nesting beaches. An example of this practice is U.S. processors of longline tuna and California drift gill net fishers that tax themselves to finance low-cost nesting site protection. Under certain conditions, fisheries interventions, such as technologies that reduce leatherback bycatch without substantially decreasing target species catch, can be cost-effective. Reducing bycatch in coastal areas where bycatch is high, particularly adjacent to nesting beaches, may be cost-effective, particularly, if fisheries in the area are small and of little commercial value. �

A review of low carbon fuel policies: Principles, program status and future directions

International Nuclear Information System (INIS)

Yeh, Sonia; Witcover, Julie; Lade, Gabriel E.; Sperling, Daniel

2016-01-01

A low carbon fuel standard (LCFS) is a market-based policy that specifies declining standards for the average lifecycle fuel carbon intensity (AFCI) of transportation fuels sold in a region. This paper: (i) compares transportation fuel carbon policies in terms of their economic efficiency, fuel price impacts, greenhouse gas emission reductions, and incentives for innovation; (ii) discusses key regulatory design features of LCFS policies; and (iii) provides an update on the implementation status of LCFS policies in California, the European Union, British Columbia, and Oregon. The economics literature finds that an intensity standard implicitly taxes emissions and subsidizes output. The output subsidy results in an intensity standard being inferior to a carbon tax in a first-best world, although the inefficiency can be corrected with a properly designed consumption tax (or mitigated by a properly designed carbon tax or cap-and-trade program). In California, from 2011 to 2015 the share of alternative fuels in the regulated transportation fuels pool increased by 30%, and the reported AFCI of all alternative fuels declined 21%. LCFS credit prices have varied considerably, rising to above $100/credit in the first half of 2016. LCFS programs in other jurisdictions share many features with California's, but have distinct provisions as well. - Highlights: • LCFS is a market-based policy that sets standards for carbon intensity of fuels. • We compare efficiency, price impacts, GHG emissions, and innovation of C policies. • In California, reported carbon intensity of alternative fuels declined 21% 2011–2015. • LCFS credit prices have varied considerably, rising to above $100/credit in the first half of 2016. • Other LCFS programs share many features with CA's and have distinct provisions.

Novel low-cost alternative to THz for security and defence applications

Science.gov (United States)

Diamond, G. G.; Hutchins, D. A.; Pallav, P.; Green, R. J.

2008-10-01

A novel technique of NIR imaging is presented that gives access to most of the applications currently published as being solely suitable for Terahertz (THz) waves. The technique uses NIR beams wavelengths found in ordinary domestic remote controls (circa 850 nm) and various signal recovery techniques commonly found in astronomy. This alternative technique can be realised by very simple and inexpensive electronics and is inherently far more portable and easy to use and no special sources are required. Transmission imaging results from this technique are presented from several industrial examples and various security applications and are compared and contrasted directly with their THz-derived counterparts. It would appear possible to very cheaply and simply emulate the performance of commercial terahertz systems at a fraction of the cost and with greatly reduced processing times Another advantage is that apart from imaging, this technique affords the means to provide simultaneous in-situ chemical-bond analysis for stand-off detection of certain chemical signatures - for example, those found in drugs and explosives (both molecular and oxidiser based). Also, unlike THz, this technique can penetrate bulk water and high humidity atmospheres and be used in transmission mode on biological and medical samples. Several results are presented of non-ionising X-ray type images that even differentiate between separate types of soft tissue

Alternative Approaches in Evaluating the EU SME Policy: Answers to the Question of Impact and Legitimization

Directory of Open Access Journals (Sweden)

Robert K. GRUENWALD

2014-08-01

Findings:  OECD  and  EU  evaluations  do  not  determine  causal  relationships  between funding allocation and effects. The evaluations of the KfW and the German Ministry of Economics  use  an  empirical  quantitative  approach  and  determine  direct  causal relations. In  order to fulfil the requirements of legitimizing functions  for  the  SME  policy,  it  is  recommended  to  further  develop  the  EU  funding policy  and  evaluation  according  to  the  “German  model”  both  in  terms  of  the institutional  framework  and  in  terms  of  the  evaluation  of  impacts  through  funding policy measures. Definition  of  minimum  requirements  and  alternative possibilities  for  EU  SME  policy  evaluation  in  order  to  close  the  legitimisation  gap between the allocation of tax money and impact proof (cost-benefit ratio.

Preventing the Wernicke-Korsakoff syndrome in Australia: cost-effectiveness of thiamin-supplementation alternatives.

Science.gov (United States)

Connelly, L; Price, J

1996-04-01

Alcoholic Wernicke's encephalopathy has been commonplace in Australia for many years and, as this syndrome is attributed to a deficiency in the diet, it should be preventable. This study employs conventional cost-effectiveness methodology to compare the economic efficiency of several thiamin-supplementation alternatives that have been proposed for the prevention of Wernicke's encephalopathy. A series of rankings of these measures is derived from an estimated cost per case averted for each of the alternatives studied. These rankings identify the least cost-effective thiamin-supplementation alternative as that of enriching bread-making flour with thiamin.

J3Gen: A PRNG for Low-Cost Passive RFID

Directory of Open Access Journals (Sweden)

Jordi Herrera-Joancomartí

2013-03-01

Full Text Available Pseudorandom number generation (PRNG is the main security tool in low-cost passive radio-frequency identification (RFID technologies, such as EPC Gen2. We present a lightweight PRNG design for low-cost passive RFID tags, named J3Gen. J3Gen is based on a linear feedback shift register (LFSR configured with multiple feedback polynomials. The polynomials are alternated during the generation of sequences via a physical source of randomness. J3Gen successfully handles the inherent linearity of LFSR based PRNGs and satisfies the statistical requirements imposed by the EPC Gen2 standard. A hardware implementation of J3Gen is presented and evaluated with regard to different design parameters, defining the key-equivalence security and nonlinearity of the design. The results of a SPICE simulation confirm the power-consumption suitability of the proposal.

Hidden costs of low-cost screening mammography

International Nuclear Information System (INIS)

Cyrlak, D.

1987-01-01

Twenty-two hundred women in Orange County, California, took part in a low-cost mammography screening project sponsored by the American Cancer Society and the KCBS-TV. Patients were followed up by telephone and questioned about actual costs incurred as a result of screening mammography, including costs of repeated and follow-up mammograms, US examinations and surgical consultations. The total number of biopsies, cancers found, and the costs involved were investigated. The authors' results suggest that particularly in centers with a high positive call rate, the cost of screening mammograms accounts for only a small proportion of the medical costs

Cost estimates for nuclear power in the UK

International Nuclear Information System (INIS)

Harris, Grant; Heptonstall, Phil; Gross, Robert; Handley, David

2013-01-01

Current UK Government support for nuclear power has in part been informed by cost estimates that suggest that electricity from new nuclear power stations will be competitive with alternative low carbon generation options. The evidence and analysis presented in this paper suggests that the capital cost estimates for nuclear power that are being used to inform these projections rely on costs escalating over the pre-construction and construction phase of the new build programme at a level significantly below those that have been experienced by past US and European programmes. This paper applies observed construction time and cost escalation rates to the published estimates of capital costs for new nuclear plant in the UK and calculates the potential impact on levelised cost per unit of electricity produced. The results suggest that levelised cost may turn out to be significantly higher than expected which in turn has important implications for policy, both in general terms of the potential costs to consumers and more specifically for negotiations around the level of policy support and contractual arrangements offered to individual projects through the proposed contract for difference strike price. -- Highlights: •Nuclear power projects costs can rise substantially during the construction period. •Pre-construction and construction time can be much longer than anticipated. •Adjusting estimates for observed experience increases levelised costs significantly. •Higher costs suggest that more policy support than envisaged may be required

Final cost reduction study for the Geysers Recharge Alternative. Volume 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-11-01

The purpose of this study is to determine whether or not cost reduction opportunities exist for the Geysers Recharge Alternative as defined in the Santa Rosa Subregional Long-Term Wastewater Project EIR/EIS. The City of Santa Rosa has been directed to have a plan for reclaimed water disposal in place by 1999 which will meet future capacity needs under all weather conditions. A Draft EIR/EIS released in July 1996 and a Final EIR certified in June 1997 examine four primary alternatives plus the No Action Alternative. Two of the primary alternatives involve agricultural irrigation with reclaimed water, either in western or southern Sonoma County. Another involves increased discharge of reclaimed water into the Russian River. The fourth involves using reclaimed water to replenish the geothermal reservoir at the Geysers. The addition of this water source would enable the Geysers operators to produce more steam from the geothermal area and thereby prolong the life and economic production level of the steamfield and the geothermal power plants supplied by the steamfield. This study provides additional refined cost estimates for new scenarios which utilize an alternative pipeline alignment and a range of reclaimed water flows, which deliver less water to the Geysers than proposed in the EIR/EIS (by distributing flow to other project components). Also, electrical power rates were revised to reflect the recent changes in costs associated with deregulation of the power industry. In addition, this report provides information on sources of potential public and private funding available and future environmental documentation required if the cost reduction scenarios were to be selected by the City as part of their preferred alternative.

Palliative and low cost radiotherapy in developing countries

International Nuclear Information System (INIS)

Allen, Barry; Hussein, S.M.A.

2011-01-01

Full text: The International Agency for Research on Cancer predicts that cancer incidence in developing countries will increase dramatically in the first two decades of this millennium. Already some 80% of cancer patients in developing countries present with incurable disease. In many cases pain is a severe problem and palliation is needed to improve quality of life as well as extending survival. This paper will consider the physical and clinical aspects of palliative radiotherapy (PRT), choice of radiation modality, alternative approaches to imaging and therapy and cost-benefit considerations. The potential benefits of a dedicated palliative care centre include lower cost and therefore more centres, enabling more patients access to regional palliative care. Simple curative treatments could also be managed. Co60 radiotherapy has important advantages in developing countries, because of the higher initial cost of a linear accelerator, as well as the need for reliable power supply and the level of skill required by linac technicians and physicists. The beam characteristics of both Co60 units and low energy linacs are compared and both are found to be acceptable for palliation. The role of palliative and low cost radiotherapy in Bangladesh is reviewed. The concept of telemedicine is also discussed, using mobile phones and internet communication to allow rural clinics to receive support from specialists based in the cities, to send images for remote diagnosis and remote dose planning for radiotherapy.

Metal-free supercapacitor with aqueous electrolyte and low-cost carbon materials

Science.gov (United States)

Blomquist, Nicklas; Wells, Thomas; Andres, Britta; Bäckström, Joakim; Forsberg, Sven; Olin, Håkan

2017-01-01

Electric double-layer capacitors (EDLCs) or supercapacitors (SCs) are fast energy storage devices with high pulse efficiency and superior cyclability, which makes them useful in various applications including electronics, vehicles and grids. Aqueous SCs are considered to be more environmentally friendly than those based on organic electrolytes. Because of the corrosive nature of the aqueous environment, however, expensive electrochemically stable materials are needed for the current collectors and electrodes in aqueous SCs. This results in high costs for a given energy-storage capacity. To address this, we developed a novel low-cost aqueous SC using graphite foil as the current collector and a mix of graphene, nanographite, simple water-purification carbons and nanocellulose as electrodes. The electrodes were coated directly onto the graphite foil by using casting frames and the SCs were assembled in a pouch cell design. With this approach, we achieved a material cost reduction of greater than 90% while maintaining approximately one-half of the specific capacitance of a commercial unit, thus demonstrating that the proposed SC can be an environmentally friendly, low-cost alternative to conventional SCs.

Synthesis and characterization of low cost magnetorheological (MR) fluids

Science.gov (United States)

Sukhwani, V. K.; Hirani, H.

2007-04-01

Magnetorheological fluids have great potential for engineering applications due to their variable rheological behavior. These fluids find applications in dampers, brakes, shock absorbers, and engine mounts. However their relatively high cost (approximately US600 per liter) limits their wide usage. Most commonly used magnetic material "Carbonyl iron" cost more than 90% of the MR fluid cost. Therefore for commercial viability of these fluids there is need of alternative economical magnetic material. In the present work synthesis of MR fluid has been attempted with objective to produce low cost MR fluid with high sedimentation stability and greater yield stress. In order to reduce the cost, economical electrolytic Iron powder (US 10 per Kg) has been used. Iron powder of relatively larger size (300 Mesh) has been ball milled to reduce their size to few microns (1 to 10 microns). Three different compositions have been prepared and compared for MR effect produced and stability. All have same base fluid (Synthetic oil) and same magnetic phase i.e. Iron particles but they have different additives. First preparation involves organic additives Polydimethylsiloxane (PDMS) and Stearic acid. Other two preparations involve use of two environmental friendly low-priced green additives guar gum (US 2 per Kg) and xanthan gum (US 12 per Kg) respectively. Magnetic properties of Iron particles have been measured by Vibrating Sample Magnetometer (VSM). Morphology of Iron particles and additives guar gum and xanthan gum has been examined by Scanning Electron Microscopy (SEM) and Particles Size Distribution (PSD) has been determined using Particle size analyzer. Microscopic images of particles, MH plots and stability of synthesized MR fluids have been reported. The prepared low cost MR fluids showed promising performance and can be effectively used for engineering applications demanding controllability in operations.

Deregulation and Nuclear Training: Cost Effective Alternatives

International Nuclear Information System (INIS)

Richard P. Coe; Patricia A. Lake

2000-01-01

Training is crucial to the success of any organization. It is also expensive, with some estimates exceeding $50 billion annually spent on training by U.S. corporations. Nuclear training, like that of many other highly technical organizations, is both crucial and costly. It is unlikely that the amount of training can be significantly reduced. If anything, current trends indicate that training needs will probably increase as the industry and workforce ages and changes. With the advent of energy deregulation in the United States, greater pressures will surface to make the costs of energy more cost-competitive. This in turn will drive businesses to more closely examine existing costs and find ways to do things in a more cost-effective way. The commercial nuclear industry will be no exception, and nuclear training will be equally affected. It is time for nuclear training and indeed the entire nuclear industry to begin using more aggressive techniques to reduce costs. This includes the need for nuclear training to find alternatives to traditional methods for the delivery of cost-effective high-quality training that meets regulatory requirements and produces well-qualified personnel capable of working in an efficient and safe manner. Computer-based and/or Web-based training are leading emerging technologies

Cost effectiveness methodology for evaluating Korean international communication system alternatives.

OpenAIRE

Hwang, Tae Kyun.

1987-01-01

Approved for public release; distribution in unlimited. Cost and Effectiveness models are developed by using of cost-effectiveness technique for fiber optic cable and satellite communication media. The models are applied to the Korean international communication problem. Alternative selection is required since the two medias different in cost and effectiveness. The major difficulties encountered were data gathering and measuring the effectiveness of the Korean international ...

Power Generation Technology Choice in the Presence of Climate Policy

International Nuclear Information System (INIS)

Pettersson, Fredrik

2005-01-01

The overall purpose of this thesis is to analyze power generation technology choices in the presence of climate policy. Special attention is paid to the diffusion of renewable power technologies following a carbon pricing policy, and this topic is analyzed in two self-contained papers. The overall objective of paper 1 is to analyze how future investments in the Swedish power sector can be affected by carbon pricing policies following the Kyoto Protocol. In the first part we focus on the price of carbon following the Kyoto commitments and to what extent this policy will affect the relative competitiveness of the available investment alternatives. The second part pays attention to the possible impacts of technology learning - and the resulting cost decreases - on the economics of power generation in the presence of climate policy. The first part considers the majority of power generation technologies available in Sweden, while the second part focuses solely on the competition between combined cycle natural gas plants and the cheapest renewable power alternative, wind power. Methodologically, we approach the above issues from the perspective of a power generator who considers investing in new generation capacity. This implies that we first of all assess the lifetime engineering costs of different power generation technologies in Sweden, and analyze the impact of carbon pricing on the competitive cost position of these technologies under varying rate-of-return requirements. Overall the results indicate that in general it is not certain that compliance with the Kyoto commitments implies substantial increases in renewable power sources. If, therefore, renewable power sources are favored for reasons beyond climate policy additional policy instruments will be needed. The purpose of paper 2 is to analyze the costs for reducing CO 2 emissions in the power-generating sectors in Croatia, the European part of Russia, Macedonia, Serbia and the Ukraine in 2020 by using a linear

Costly energy : why oil and gas prices are rising and what we can do about it : a collection of progressive analysis and policy alternatives

International Nuclear Information System (INIS)

Klein, S.

2001-02-01

A collection of essays were presented to address the issue of rising oil and gas prices. This issue has significant social and environmental implications and the public wants to know what is driving prices up and who is profiting. The myth that gas taxes are driving price increases was dispelled. It was argued that price hikes are mainly due to crude oil price increases and to refining and marketing price increases. The link between rising prices and free trade was also emphasized. The North American Free Trade Agreement (NAFTA) tied Canada into a North American energy market in which U.S. demand sets prices in Canada. It was suggested that trade rules regarding energy should be changed. Other short and longer-term progressive policy alternatives were also presented in the second part of this report. One possible short-term policy response would be to tax windfall oil and gas profits and direct the resulting revenues to rebates for low-income households and for energy conservation initiatives. It was noted that the environmental benefit of rising prices is that it encourages conservation and improved fuel efficiency. The final part of this report discussed the issue of protecting electricity from deregulation and sited lessons learned from the deregulation of natural gas. 2 tabs., 4 figs

Low-cost electrodes for stable perovskite solar cells

Science.gov (United States)

Bastos, João P.; Manghooli, Sara; Jaysankar, Manoj; Tait, Jeffrey G.; Qiu, Weiming; Gehlhaar, Robert; De Volder, Michael; Uytterhoeven, Griet; Poortmans, Jef; Paetzold, Ulrich W.

2017-06-01

Cost-effective production of perovskite solar cells on an industrial scale requires the utilization of exclusively inexpensive materials. However, to date, highly efficient and stable perovskite solar cells rely on expensive gold electrodes since other metal electrodes are known to cause degradation of the devices. Finding a low-cost electrode that can replace gold and ensure both efficiency and long-term stability is essential for the success of the perovskite-based solar cell technology. In this work, we systematically compare three types of electrode materials: multi-walled carbon nanotubes (MWCNTs), alternative metals (silver, aluminum, and copper), and transparent oxides [indium tin oxide (ITO)] in terms of efficiency, stability, and cost. We show that multi-walled carbon nanotubes are the only electrode that is both more cost-effective and stable than gold. Devices with multi-walled carbon nanotube electrodes present remarkable shelf-life stability, with no decrease in the efficiency even after 180 h of storage in 77% relative humidity (RH). Furthermore, we demonstrate the potential of devices with multi-walled carbon nanotube electrodes to achieve high efficiencies. These developments are an important step forward to mass produce perovskite photovoltaics in a commercially viable way.

Low-cost high purity production

Science.gov (United States)

Kapur, V. K.

1978-01-01

Economical process produces high-purity silicon crystals suitable for use in solar cells. Reaction is strongly exothermic and can be initiated at relatively low temperature, making it potentially suitable for development into low-cost commercial process. Important advantages include exothermic character and comparatively low process temperatures. These could lead to significant savings in equipment and energy costs.

[Cost-effectiveness of breast cancer screening policies in Mexico].

Science.gov (United States)

Valencia-Mendoza, Atanacio; Sánchez-González, Gilberto; Bautista-Arredondo, Sergio; Torres-Mejía, Gabriela; Bertozzi, Stefano M

2009-01-01

Generate cost-effectiveness information to allow policy makers optimize breast cancer (BC) policy in Mexico. We constructed a Markov model that incorporates four interrelated processes of the disease: the natural history; detection using mammography; treatment; and other competing-causes mortality, according to which 13 different strategies were modeled. Strategies (starting age, % of coverage, frequency in years)= (48, 25, 2), (40, 50, 2) and (40, 50, 1) constituted the optimal method for expanding the BC program, yielding 75.3, 116.4 and 171.1 thousand pesos per life-year saved, respectively. The strategies included in the optimal method for expanding the program produce a cost per life-year saved of less than two times the GNP per capita and hence are cost-effective according to WHO Commission on Macroeconomics and Health criteria.

An energy-economic scenario analysis of alternative fuels for personal transport using the Global Multi-regional MARKAL model (GMM)

International Nuclear Information System (INIS)

Guel, Timur; Kypreos, Socrates; Turton, Hal; Barreto, Leonardo

2009-01-01

This paper deals with the long-term prospects of alternative fuels in global personal transport. It aims at assessing key drivers and key bottlenecks for their deployment, focusing particularly on the role of biofuels and hydrogen in meeting climate policy objectives. The analysis is pursued using the Global Multi-regional MARKAL model (GMM), a perfect foresight ''bottom-up'' model of the global energy system with a detailed representation of alternative fuel chains, linked to the Model for the Assessment of Greenhouse Gas Induced Climate Change (MAGICC). The analysis shows that biofuels are limited by the regional availability of low-cost biomass, but can be important for meeting mild climate policy targets. If policy-makers intend to pursue more stringent climate policy, then hydrogen becomes a competitive option. However, the analysis finds that the use of hydrogen in personal transport is restricted to very stringent climate policy, as only such policy provides enough incentive to build up the required delivery infrastructure. An analysis of costs additionally shows that ''keeping the hydrogen option open'' does not take considerable investments compared to the investment needs in the power sector within the next decades, but allows the use of hydrogen for the pursuit of stringent climate policy in the second half of the century. (author)

Low-cost, highly transparent flexible low-e coating film to enable electrochromic windows with increased energy savings

Energy Technology Data Exchange (ETDEWEB)

Berland, Brian [ITN Energy Systems, Inc., Littleton, CO (United States); Hollingsworth, Russell [ITN Energy Systems, Inc., Littleton, CO (United States)

2015-03-31

Five Quads of energy are lost through windows annually in the U.S. Low-e coatings are increasingly employed to reduce the wasted energy. Most commonly, the low-e coating is an oxide material applied directly to the glass at high temperature. With over 100,000,000 existing homes, a retrofit product is crucial to achieve widespread energy savings. Low-e films, i.e. coatings on polymeric substrates, are now also available to meet this need. However, the traditional oxide materials and process is incompatible with low temperature plastics. Alternate high performing low-e films typically incorporate materials that limit visible transmission to 35% or less. Further, the cost is high. The objective of this award was to develop a retrofit, integrated low-e/electrochromic window film to dramatically reduce energy lost through windows. While field testing of state-of-the-art electrochromic (EC) windows show the energy savings are maximized if a low-e coating is used in conjunction with the EC, available low-e films have a low visible transmission (~70% or less) that limits the achievable clear state and therefore, appearance and energy savings potential. Comprehensive energy savings models were completed at Lawrence Berkeley National Lab (LBNL). A parametric approach was used to project energy usage for windows with a large range of low-e properties across all U.S. climate zones, without limiting the study to materials that had already been produced commercially or made in a lab. The model enables projection of energy savings for low-e films as well as integrated low-e/EC products. This project developed a novel low-e film, optimized for compatibility with EC windows, using low temperature, high deposition rate processes for the growth of low-e coatings on plastic films by microwave plasma enhanced chemical vapor deposition. Silica films with good density and optical properties were demonstrated at deposition rates as high as 130Å/sec. A simple bi-layer low-e stack of

Costs of rearing children in agricultural economies: an alternative estimation approach and findings from rural Bangladesh.

Science.gov (United States)

Khan, M M; Magnani, R J; Mock, N B; Saadat, Y S

1993-03-01

There are changes in child costs during demographic transition. This study examines household time allocation from 66 agricultural households in 3 villages in Tangail District in rural north central Bangladesh in 1984-85 (371 days). Component and total child-rearing costs are estimated in alternative ways. Conventional "opportunity wage" measures are considered overestimated. The methodological shortcomings of direct cost accounting procedures and consumer demand methods in computing time cost and monetary cost of child rearing are pointed out. In this study's alternative computation, age standardized equivalent costs are generated. Child food consumption costs were generated from a large national survey conducted in 1983. Nonfood expenditures were estimated by food to nonfood expenditure ratios taken from the aforementioned survey. For estimating breast-feeding costs, an estimate was produced based on the assumption that costs for infant food consumption were a fixed proportion of food costs for older children. Land ownership groups were set up to reflect socioeconomic status: 1) landless households, 2) marginal farm households with 1 acre or .4 hectares of land, 3) middle income households with 1-2 acres of land, 4) upper middle income households with 2-4 acres of land, and 5) upper income or rich households with over 4 acres of land. The nonmarket wage rate for hired household help was used to determine the value of cooking, fetching water, and household cleaning and repairing. The results confirm the low costs of child rearing in high fertility societies. Productive nonmarket activities are effective in subsidizing the costs of children. The addition of a child into households already with children has a low impact on time costs of children; "this economies of scale effect is estimated ... at 20%." The highest relative costs were found in the lowest income households, and the lowest costs were in the highest income households. 5% of total household income is

Emulation-Based Virtual Laboratories: A Low-Cost Alternative to Physical Experiments in Control Engineering Education

Science.gov (United States)

Goodwin, G. C.; Medioli, A. M.; Sher, W.; Vlacic, L. B.; Welsh, J. S.

2011-01-01

This paper argues the case for emulation-based virtual laboratories in control engineering education. It demonstrates that such emulation experiments can give students an industrially relevant educational experience at relatively low cost. The paper also describes a particular emulation-based system that has been developed with the aim of giving…

EVALUATING THE IMPACT OF POLICY OPTIONS ON AGRICULTURAL LANDSCAPES: AN ALTERNATIVE-FUTURES APPROACH

Science.gov (United States)

Alternative-futures analysis was used to analyze different scenarios of future growth patterns and attendant resource allocations on the agricultural system of Oregon's Willamette River Basin. A stakeholder group formulated three policy alternatives: a continuation of current tr...

A strategy for low cost development of incremental oil in legacy reservoirs

Science.gov (United States)

Attanasi, E.D.

2016-01-01

The precipitous decline in oil prices during 2015 has forced operators to search for ways to develop low-cost and low-risk oil reserves. This study examines strategies to low cost development of legacy reservoirs, particularly those which have already implemented a carbon dioxide enhanced oil recovery (CO2 EOR) program. Initially the study examines the occurrence and nature of the distribution of the oil resources that are targets for miscible and near-miscible CO2 EOR programs. The analysis then examines determinants of technical recovery through the analysis of representative clastic and carbonate reservoirs. The economic analysis focusses on delineating the dominant components of investment and operational costs. The concluding sections describe options to maximize the value of assets that the operator of such a legacy reservoir may have that include incremental expansion within the same producing zone and to producing zones that are laterally or stratigraphically near main producing zones. The analysis identified the CO2 recycle plant as the dominant investment cost item and purchased CO2 and liquids management as a dominant operational cost items. Strategies to utilize recycle plants for processing CO2 from multiple producing zones and multiple reservoir units can significantly reduce costs. Industrial sources for CO2 should be investigated as a possibly less costly way of meeting EOR requirements. Implementation of tapered water alternating gas injection schemes can partially mitigate increases in fluid lifting costs.

IQ-Station: A Low Cost Portable Immersive Environment

Energy Technology Data Exchange (ETDEWEB)

Eric Whiting; Patrick O' Leary; William Sherman; Eric Wernert

2010-11-01

The emergence of inexpensive 3D TV’s, affordable input and rendering hardware and open-source software has created a yeasty atmosphere for the development of low-cost immersive environments (IE). A low cost IE system, or IQ-station, fashioned from commercial off the shelf technology (COTS), coupled with a targeted immersive application can be a viable laboratory instrument for enhancing scientific workflow for exploration and analysis. The use of an IQ-station in a laboratory setting also has the potential of quickening the adoption of a more sophisticated immersive environment as a critical enabler in modern scientific and engineering workflows. Prior work in immersive environments generally required either a head mounted display (HMD) system or a large projector-based implementation both of which have limitations in terms of cost, usability, or space requirements. The solution presented here provides an alternative platform providing a reasonable immersive experience that addresses those limitations. Our work brings together the needed hardware and software to create a fully integrated immersive display and interface system that can be readily deployed in laboratories and common workspaces. By doing so, it is now feasible for immersive technologies to be included in researchers’ day-to-day workflows. The IQ-Station sets the stage for much wider adoption of immersive environments outside the small communities of virtual reality centers.

A dynamic simulation model for assessing the overall impact of incentive policies on power system reliability, costs and environment

International Nuclear Information System (INIS)

Ibanez-Lopez, A.S.; Martinez-Val, J.M.; Moratilla-Soria, B.Y.

2017-01-01

The liberalization of power markets has entailed dramatic changes in power system planning worldwide. The inception of new alternative technologies, smart grids and distributed generation and storage is expected to make system planning even more challenging. Government policies still play a major role in the evolution of a country's power generation mix, even in those countries with liberalized markets. This paper presents a System Dynamics model aimed at assessing the overall technical, economic and environmental impact of renewable energy incentives and capacity payment policies. The model has been used to simulate Spain's power industry in order to assess the impact of electric power policies with the goal of getting insights regarding how to achieve an optimum power generation mix. The main conclusions of the present paper are (i) the necessity of specific regulatory actions in Spain in order to keep adequate reliability levels, avoid price spikes and boom and bust investment cycles as well as to deploy specific technologies, (ii) the fact that capacity payments are a better instrument for keeping adequate reserve margins and avoiding power price spikes than renewable energy incentives and (iii) the evidence that both instruments entail additional system costs over the base case scenario. - Highlights: • A System Dynamics model of Spain's power generation mix is proposed. • The overall policy impact on system costs, environment and reliability is assessed. • Current policies are not enough to keep adequate reliability levels. • Capacity payments are an adequate instrument for guaranteeing system reliability. • RES incentives do not solve reliability issues and entail greater system costs.

Provider costs for prevention and treatment of cardiovascular and related conditions in low- and middle-income countries: a systematic review.

Science.gov (United States)

Brouwer, Elizabeth D; Watkins, David; Olson, Zachary; Goett, Jane; Nugent, Rachel; Levin, Carol

2015-11-26

The burden of cardiovascular disease (CVD) and CVD risk conditions is rapidly increasing in low- and middle-income countries, where health systems are generally ill-equipped to manage chronic disease. Policy makers need an understanding of the magnitude and drivers of the costs of cardiovascular disease related conditions to make decisions on how to allocate limited health resources. We undertook a systematic review of the published literature on provider-incurred costs of treatment for cardiovascular diseases and risk conditions in low- and middle-income countries. Total costs of treatment were inflated to 2012 US dollars for comparability across geographic settings and time periods. This systematic review identified 60 articles and 143 unit costs for the following conditions: ischemic heart disease, non-ischemic heart diseases, stroke, heart failure, hypertension, diabetes, and chronic kidney disease. Cost data were most readily available in middle-income countries, especially China, India, Brazil, and South Africa. The most common conditions with cost studies were acute ischemic heart disease, type 2 diabetes mellitus, stroke, and hypertension. Emerging economies are currently providing a base of cost evidence for NCD treatment that may prove useful to policy-makers in low-income countries. Initial steps to publicly finance disease interventions should take account of costs. The gaps and limitations in the current literature include a lack of standardized reporting as well as sparse evidence from low-income countries.

Global warming and urban smog: Cost-effectiveness of CAFE standards and alternative fuels

International Nuclear Information System (INIS)

Krupnick, A.J.; Walls, M.A.; Collins, C.T.

1993-01-01

In this paper we estimate the cost-effectiveness, in terms of reducing greenhouse gas emissions, of increasing the corporate average fuel economy (CAFE) standard to 38 miles per gallon and substituting methanol, compressed natural gas (CNG), and reformulated gasoline for conventional gasoline. Greenhouse gas emissions are assessed over the entire fuel cycle and include carbon dioxide, methane, carbon monoxide, and nitrous oxide emissions. To account for joint environmental benefits, the cost per ton of greenhouse gas reduced is adjusted for reductions in volatile organic compound (VOC) emissions, an ozone precursor. CNG is found to be the most cost-effective of these alternatives, followed by increasing the CAFE standard, substituting methanol for gasoline, and substituting reformulated for conventional gasoline. Including the VOC benefits does not change the ranking of the alternatives, but does make the alternative fuels look better relative to increasing the CAFE standard. None of the alternatives look cost-effective should a carbon tax of $35 per ton be passed, and only CNG under optimistic assumptions looks cost-effective with a tax of $100 per ton of carbon. 35 refs., 4 figs., 6 tabs

Tracking costs of alternatively fueled buses in Florida : [summary].

Science.gov (United States)

2011-01-01

In an effort to address rising fuel costs and environmental concerns, many transit agencies across Florida have introduced alternative fuel technologies to their traditional diesel-powered fleets. Fuel types include biodiesel, compressed natural gas,...

Low-cost rural surface alternatives : literature review and recommendations.

Science.gov (United States)

2013-12-01

Freezing and thawing action induces damage to unbound gravel roads in Iowa resulting in maintenance costs for secondary road departments. Some approaches currently used by County Engineers to deal with this problem include temporarily spreading rock ...

Cost-effectiveness of plug-in hybrid electric vehicle battery capacity and charging infrastructure investment for reducing US gasoline consumption

International Nuclear Information System (INIS)

Peterson, Scott B.; Michalek, Jeremy J.

2013-01-01

Federal electric vehicle (EV) policies in the United States currently include vehicle purchase subsidies linked to EV battery capacity and subsidies for installing charging stations. We assess the cost-effectiveness of increased battery capacity vs. nondomestic charging infrastructure installation for plug-in hybrid electric vehicles as alternate methods to reduce gasoline consumption for cars, trucks, and SUVs in the US. We find across a wide range of scenarios that the least-cost solution is for more drivers to switch to low-capacity plug-in hybrid electric vehicles (short electric range with gasoline backup for long trips) or gasoline-powered hybrid electric vehicles. If more gasoline savings are needed per vehicle, nondomestic charging infrastructure installation is substantially more expensive than increased battery capacity per gallon saved, and both approaches have higher costs than US oil premium estimates. Cost effectiveness of all subsidies are lower under a binding fuel economy standard. Comparison of results to the structure of current federal subsidies shows that policy is not aligned with fuel savings potential, and we discuss issues and alternatives. - Highlights: ► We compare cost of PHEV batteries vs. charging infrastructure per gallon of gasoline saved. ► The lowest cost solution is to switch more drivers to low-capacity PHEVs and HEVs. ► If more gasoline savings is needed, batteries offer a better value than chargers. ► Extra batteries and chargers are both more costly per gal than oil premium estimates. ► Current subsidies are misaligned with fuel savings. We discuss alternatives.

Equity Impacts of Environmental Policy

OpenAIRE

Antonio M. Bento

2013-01-01

This article surveys recent literature on the equity impacts of environmental policy. We focus on studies that look at the distribution of costs and benefits of alternative environmental policies. We also examine potentially important trade-offs between efficiency and equity that arise in the context of environmental policy, as well as transition effects. In many of the applications surveyed here, environmental policies can be regressive. Strategies are discussed to reduce this regressivity t...

Health and economic costs of alternative energy sources

Energy Technology Data Exchange (ETDEWEB)

Hamilton, L D [Biomedical and Environmental Assessment Division, National Center for Analysis of Energy Systems, Brookhaven National Laboratory (United States); Manne, A S [Department of Operations Research, Stanford University (United States)

1978-08-15

Before the United States of America can arrive at a coherent national energy policy, several ongoing debates must be resolved - on environmental hazards, health impacts, and the direct economic consequences of alternative future energy options. No one strategy is obviously correct - or uniquely ethical. Each strategy has its drawbacks, each can be blocked by one or another coalition of interest groups. The public is poorly informed by the media. A single large coal-mine accident is far more extensively reported than a long series of isolated accidents at grade crossings for coal trains, and yet the latter causes more deaths each year. Similarly, the public debate on nuclear issues is focused on low-probability, high-consequence events. It is as though national policy were being framed by a gambler whose motto is 'it's only the stakes and not the odds that matter'. The two authors of this paper come from different disciplines, yet they both believe that the odds do matter. It is essential that the public be well informed about the health risks and the economic consequences of a moratorium on the civilian uses of nuclear energy in the USA. We think that such a moratorium would adversely affect health and the economy. These impacts although small in relation, say, to the overall death rate or to the overall gross national product are not small in an absolute sense The adverse consequences of a moratorium are much more certain, and surely outweigh the impacts of any plausible accident associated with the operation of power reactors.

Health and economic costs of alternative energy sources

International Nuclear Information System (INIS)

Hamilton, L.D.; Manne, A.S.

1978-01-01

Before the United States of America can arrive at a coherent national energy policy, several ongoing debates must be resolved - on environmental hazards, health impacts, and the direct economic consequences of alternative future energy options. No one strategy is obviously correct - or uniquely ethical. Each strategy has its drawbacks, each can be blocked by one or another coalition of interest groups. The public is poorly informed by the media. A single large coal-mine accident is far more extensively reported than a long series of isolated accidents at grade crossings for coal trains, and yet the latter causes more deaths each year. Similarly, the public debate on nuclear issues is focused on low-probability, high-consequence events. It is as though national policy were being framed by a gambler whose motto is 'it's only the stakes and not the odds that matter'. The two authors of this paper come from different disciplines, yet they both believe that the odds do matter. It is essential that the public be well informed about the health risks and the economic consequences of a moratorium on the civilian uses of nuclear energy in the USA. We think that such a moratorium would adversely affect health and the economy. These impacts although small in relation, say, to the overall death rate or to the overall gross national product are not small in an absolute sense The adverse consequences of a moratorium are much more certain, and surely outweigh the impacts of any plausible accident associated with the operation of power reactors

Liquefied Natural Gas as an alternative fuel: a regional-level social cost-benefit appraisal

OpenAIRE

Moreira, Paulo Pires; Caetano, Fernando J. P.

2017-01-01

The impact from traditional marine fuels has the potential of causing health and non-health damages and contributes to climate change. Here, the introduction of Liquefied Natural Gas (LNG) as an energy end-use fuel for marine purposes is analysed. The aim of this study is to verify LNG’s policy implementation feasibility as a step-change for a low carbon perspective for shipping by means of developing a social cost-benefit analysis on a regional basis. Emissions from the Portuguese merchant f...

The market and environmental effects of alternative biofuel policies

Science.gov (United States)

Drabik, Dusan

This dissertation analyzes market and environmental effects of alternative U.S. and Brazilian biofuel policies. Although we focus on corn- and sugarcane-ethanol, the advanced analytical framework can easily be extended to other biofuels and biofuel feedstocks, such as biodiesel and soybean. The dissertation consists of three chapters. The first chapter develops an analytical framework to assess the market effects of a set of biofuel policies (including subsidies to feedstocks). U.S. corn-ethanol policies are used as an example to study the effects of biofuel policies on corn prices. We determine the 'no policy' ethanol price, analyze the implications for the 'no policy' corn price and resulting 'water' in the ethanol price premium due to the policy, and generalize the surprising interaction effects between mandates and tax credits to include ethanol and corn production subsidies. The effect of an ethanol price premium depends on the value of the ethanol co-product, the value of production subsidies, and how the world ethanol price is determined. U.S. corn-ethanol policies are shown to be a major reason for recent rises in corn prices. The ethanol policy-induced increase in corn prices is estimated to be 33 -- 46.5 percent in the period 2008 -- 2011. The second chapter seeks to answer the question of what caused the significant increase in ethanol, sugar, and sugarcane prices in Brazil in the period 2010/11 to 2011/12. We develop a general economic model of the Brazilian fuel-ethanol-sugar complex. Unlike biofuel mandates and tax exemptions elsewhere, Brazil's fuel-ethanol-sugar markets and fuel policies are unique in that each policy, in this setting, theoretically has an ambiguous impact on the market price of ethanol and hence on sugarcane and sugar prices. Our empirical analysis shows that there are two policies that seemingly help the ethanol industry but do otherwise in reality: a low gasoline tax and a high anhydrous tax exemption result in lower ethanol

Power generation costs for alternate reactor fuel cycles

International Nuclear Information System (INIS)

Smolen, G.R.; Delene, J.G.

1980-09-01

The total electric generating costs at the power plant busbar are estimated for various nuclear reactor fuel cycles which may be considered for power generation in the future. The reactor systems include pressurized water reactors (PWR), heavy-water reactors (HWR), high-temperature gas cooled reactors (HTGR), liquid-metal fast breeder reactors (LMFBR), light-water pre-breeder and breeder reactors (LWPR, LWBR), and a fast mixed spectrum reactor (FMSR). Fuel cycles include once-through, uranium-only recycle, and full recycle of the uranium and plutonium in the spent fuel assemblies. The U 3 O 8 price for economic transition from once-through LWR fuel cycles to both PWR recycle and LMFBR systems is estimated. Electric power generation costs were determined both for a reference set of unit cost parameters and for a range of uncertainty in these parameters. In addition, cost sensitivity parameters are provided so that independent estimations can be made for alternate cost assumptions

A policy-oriented cost model for shipping commodities by truck.

Science.gov (United States)

2009-12-01

Surprisingly, transportation planners and policy makers do not have the ability to estimate the cost of shipping a quantity of a commodity between two : locations for broad categories of goods. Costs of shipping are important components in mode, rout...

Evaluation of alternative methods for the disposal of low-level radioactive wastes

International Nuclear Information System (INIS)

Macbeth, P.; Wehmann, G.; Thamer, B.J.; Card, D.H.

1979-07-01

A comparative analysis of the most viable alternatives for disposal of solid low-level radioactive wastes is presented to aid in evaluating national waste management options. Four basic alternative methods are analyzed and compared to the present practice of shallow land burial. These include deeper burial, disposal in mined cavities, disposal in engineered structures, and disposal in the oceans. Some variations in the basic methods are also presented. Technical, socio-political, and economic factors are assigened relative importances (weights) and evaluated for the various alternatives. Based on disposal of a constant volume of waste with given nuclear characteristics, the most desirable alternatives to shallow land burial in descending order of desirability appear to be: improving present practices, deeper burial, use of acceptable abandoned mines, new mines, ocean dumping, and structural disposal concepts. It must be emphasized that the evaluations reported here are generic, and use of other weights or different values for specific sites could change the conclusions and ordering of alternatives determined in this study. Impacts and costs associated with transportation over long distances predominate over differences among alternatives, indicating the desireability of establishing regional waste disposal locations. The impacts presented are for generic comparisons among alternatives, and are not intended to be predictive of the performance of any actual waste disposal facility

Energy policy in transport and transport policy

International Nuclear Information System (INIS)

Van Dender, Kurt

2009-01-01

Explanations for, and indirect evidence of, imperfections in the market for private passenger vehicle fuel economy suggest there is a reasonable case for combining fuel economy standards and fuel or carbon taxes to contribute to an energy policy that aims to reduce greenhouse gas emissions and improve energy security. Estimates of key elasticities, including the rebound effect, indicate that the positive and negative side-effects of fuel economy measures on transport activities and external costs are limited. However, an energy policy for transport does not replace a transport policy that aims to manage the main transport externalities including congestion and local pollution. Conventional marginal cost estimates and standard cost-benefit reasoning suggest that policies that address congestion and local pollution likely bring benefits at least as large as those from fuel economy measures. But the large uncertainty on the possible effects of greenhouse gas emissions constitutes a strong challenge for standard cost-benefit reasoning. Emerging results from methods to cope with this uncertainty suggest that policies to stimulate the widespread adoption of low-carbon technologies in transport are justified.

Energy policy in transport and transport policy

Energy Technology Data Exchange (ETDEWEB)

Van Dender, Kurt [Joint Transport Research Centre of the International Transport Forum and the OECD, 2 rue Andre Pascale, F-75775 Paris Cedex 16 (France)

2009-10-15

Explanations for, and indirect evidence of, imperfections in the market for private passenger vehicle fuel economy suggest there is a reasonable case for combining fuel economy standards and fuel or carbon taxes to contribute to an energy policy that aims to reduce greenhouse gas emissions and improve energy security. Estimates of key elasticities, including the rebound effect, indicate that the positive and negative side-effects of fuel economy measures on transport activities and external costs are limited. However, an energy policy for transport does not replace a transport policy that aims to manage the main transport externalities including congestion and local pollution. Conventional marginal cost estimates and standard cost-benefit reasoning suggest that policies that address congestion and local pollution likely bring benefits at least as large as those from fuel economy measures. But the large uncertainty on the possible effects of greenhouse gas emissions constitutes a strong challenge for standard cost-benefit reasoning. Emerging results from methods to cope with this uncertainty suggest that policies to stimulate the widespread adoption of low-carbon technologies in transport are justified. (author)

The policy implications of the different interpretations of the cost-effectiveness of renewable electricity support

International Nuclear Information System (INIS)

Río, Pablo del; Cerdá, Emilio

2014-01-01

The cost-effectiveness of support for renewable electricity is a main criterion to assess the success of policy instruments, together with effectiveness. The costs of support are also a source of significant concern for governments all over the world. However, significant confusion exists in the literature on the cost-effectiveness of public support for renewable electricity. While some authors define the concept of cost-effectiveness as that which complies with the equimarginality principle, many others, including documents from relevant organisations (European Commission, International Energy Agency, Intergovernmental Panel on Climate Change) define it as “the lowest costs of support”, generally equating it with the minimisation of consumer costs. The aim of this paper is to clarify the differences between both approaches and their policy implications regarding the choice of instruments and design elements. It is shown that they partly overlap and that their policy implications clearly differ, leading to very different policy prescriptions. While the former favours technology neutral instruments and design elements, the “minimisation of consumer costs” approach favours instruments and design elements which adjust support levels to the costs of the technologies. - Highlights: • Significant confusion exists in the literature on the cost-effectiveness of public support for renewable electricity. • Clarify the differences between two main approaches to cost-effectiveness. • Policy implications clearly differ, leading to very different policy prescriptions

76 FR 60357 - Federal Regulations; OMB Circulars, OFPP Policy Letters, and CASB Cost Accounting Standards...

Science.gov (United States)

2011-09-29

... derived from 41 U.S.C. 1501. Cost Accounting Standards are rules governing the measurement, assignment... Circulars, OFPP Policy Letters, and CASB Cost Accounting Standards Included in the Semiannual Agenda of..., and Cost Accounting Standards Board (CASB) Cost Accounting Standards. OMB Circulars and OFPP Policy...

Rugged, Low Cost, Environmental Sensors for a Turbulent World

Science.gov (United States)

Schulz, B.; Sandell, C. T.; Wickert, A. D.

2017-12-01

Ongoing scientific research and resource management require a diverse range of high-quality and low-cost sensors to maximize the number and type of measurements that can be obtained. To accomplish this, we have developed a series of diversified sensors for common environmental applications. The TP-DownHole is an ultra-compact temperature and pressure sensor designed for use in CMT (Continuous Multi-channel Tubing) multi-level wells. Its 1 mm water depth resolution, 30 cm altitude resolution, and rugged design make it ideal for both water level measurements and monitoring barometric pressure and associated temperature changes. The TP-DownHole sensor has also been incorporated into a self-contained, fully independent data recorder for extreme and remote environments. This device (the TP-Solo) is based around the TP-DownHole design, but has self-contained power and data storage and is designed to collect data independently for up to 6 months (logging at once an hour), creating a specialized tool for extreme environment data collection. To gather spectral information, we have also developed a very low cost photodiode-based Lux sensor to measure spectral irradiance; while this does not measure the entire solar radiation spectrum, simple modeling to rescale the remainder of the solar spectrum makes this a cost-effective alternative to a thermopile pyranometer. Lastly, we have developed an instrumentation amplifier which is designed to interface a wide range of sensitive instruments to common data logging systems, such as thermopile pyranometers, thermocouples, and many other analog output sensors. These three instruments are the first in a diverse family aimed to give researchers a set of powerful and low-cost tools for environmental instrumentation.

Low-Cost Transceiver Architectures for 60 GHz Ultra Wideband WLANs

Directory of Open Access Journals (Sweden)

S. O. Tatu

2009-01-01

Full Text Available Millimeter-wave multiport transceiver architectures dedicated to 60 GHz UWB short-range communications are proposed in this paper. Multi-port circuits based on 90° hybrid couplers are intensively used for phased antenna array, millimeter-wave modulation and down-conversion, as a low-cost alternative to the conventional architecture. This allows complete integration of circuits including antennas, in planar technology, on the same substrate, improving the overall transceiver performances.

Cost-benefit analysis of alternative fuels and motive designs.

Science.gov (United States)

2013-04-01

This project was funded by the Federal Railroad Administration to better understand the potential cost and benefits of using alternative fuels for U.S. freight and passenger locomotive operations. The framework for a decision model was developed by T...

An Ultra-light PRNG Passing Strict Randomness Tests and Suitable for Low Cost Tags

Directory of Open Access Journals (Sweden)

OZCANHAN, M. H.

2016-08-01

Full Text Available A pseudo-random number generator for low-cost RFID tags is presented. The scheme is simple, sequential and secure, yet has a high performance. Despite its lowest hardware complexity, our proposal represents a better alternative than previous proposals for low-cost tags. The scheme is based on the well-founded pseudo random number generator, Mersenne Twister. The proposed generator takes low-entropy seeds extracted from a physical characteristic of the tag and produces outputs that pass popular randomness tests. Contrarily, previous proposal tests are based on random number inputs from a popular online source, which are simply unavailable to tags. The high performance and satisfactory randomness of present work are supported by extensive test results and compared with similar previous works. Comparison using proven estimation formulae indicates that our proposal has the best hardware complexity, power consumption, and the least cost.

Low cost solar air heater

International Nuclear Information System (INIS)

Gill, R.S.; Singh, Sukhmeet; Singh, Parm Pal

2012-01-01

Highlights: ► Single glazed low cost solar air heater is more efficient during summer while double glazed is better in winter. ► For the same initial investment, low cost solar air heaters collect more energy than packed bed solar air heater. ► During off season low cost solar air heater can be stored inside as it is light in weight. - Abstract: Two low cost solar air heaters viz. single glazed and double glazed were designed, fabricated and tested. Thermocole, ultraviolet stabilised plastic sheet, etc. were used for fabrication to reduce the fabrication cost. These were tested simultaneously at no load and with load both in summer and winter seasons along with packed bed solar air heater using iron chips for absorption of radiation. The initial costs of single glazed and double glazed are 22.8% and 26.8% of the initial cost of packed bed solar air heater of the same aperture area. It was found that on a given day at no load, the maximum stagnation temperatures of single glazed and double glazed solar air heater were 43.5 °C and 62.5 °C respectively. The efficiencies of single glazed, double glazed and packed bed solar air heaters corresponding to flow rate of 0.02 m 3 /s-m 2 were 30.29%, 45.05% and 71.68% respectively in winter season. The collector efficiency factor, heat removal factor based on air outlet temperature and air inlet temperature for three solar air heaters were also determined.

Introduction of low-osmolar contrast agents in radiology: medical, economic, legal, and public policy issues

International Nuclear Information System (INIS)

Jacobson, P.D.; Rosenquist, C.J.

1988-01-01

This case study of the public policy implications of introducing a new technology in radiology, namely, low-osmolar contrast media (LOCM), raises the issues of whether and how to place appropriate limits on new technologies. Although these contrast media represent small episodic costs, they may add up to an aggregate expenditure of nearly $1 billion per year if used for all contrast injections. As a result, this technology raises a number of important medical, economic, legal, and public policy questions. The cost-effectiveness analysis and an analysis of the medical evidence suggest that LOCM should be limited to high-risk patients. The authors discuss in this article how the legal system might respond to such limitations, and they consider various public policy options for adopting restrictions on use. They conclude that the medical profession should take the lead in developing protocols for appropriate assessment, reimbursement, and use of LOCM

Getting it right: Filling the gaps in FERC's stranded cost policies

International Nuclear Information System (INIS)

Gordon, K.; Olson, W.P.

1999-01-01

FERC is currently at a cross-road: It must implement its stranded cost policies properly or the comprehensive approach that Order 888 represents will not be credible. In this context, it is important to remember that public policies aimed at introducing competition into electricity markets will proceed more quickly and effectively if the regulatory bargain is kept. Thus, any plan to introduce competition in electricity must honor existing commitments and provide utilities with a reasonable opportunity to recover prudently incurred investments. By closing the gaps in its stranded cost recovery policies in economically appropriate ways, FERC can reaccelerate the movement to efficient competition in generation markets

Cost-benefit analysis for management of low-level radioactive waste

International Nuclear Information System (INIS)

Jacobs, D.G.

1979-01-01

There are several types of cost-benefit analyses that can be used in evaluating a technical activity such as waste management. A direct comparison can be made of the benefits to be gained versus the costs to be accrued. If the balance is favorable the activity is considered to be acceptable. In many cases, however, a number of alternatives may be available requiring a comparative cost-benefit analysis so that the most favorable option is chosen. After the basic option is chosen, a further analysis is required in which additional control technologies can be considered to further reduce specific types of impact; this represents a differential cost-benefit analysis or, perhaps more properly, a study of cost-effectiveness. Also, because of the wide variety of parameters that go into a cost-benefit analysis and the range of value judgements that may be applied by different interest groups, it is likely that each additional increment of technology will have a slightly different balance point. Factors and impacts that need to be considered in management of low-level wastes will be discussed and a simplified example will be used to demonstrate the difficulties that may be encountered

Cost-benefit analysis for management of low-level radioactive waste

International Nuclear Information System (INIS)

Jacobs, D.G.

1977-01-01

There are several types of cost-benefit analyses that can be used in evaluating a technical activity such as waste management. A direct comparison can be made of the benefits to be gained versus the costs to be accrued. If the balance is favorable, the activity is considered to be acceptable. In many cases, however, a number of alternatives may be available requiring a comparative cost-benefit analysis so that the most favorable option is chosen. After the basic option is chosen, a further analysis is required in which additional control technologies can be considered to further reduce specific types of impact; this represents a differential cost-benefit analysis or, perhaps more properly, a study of cost-effectiveness. Also, because of the wide variety of parameters that go into a cost-benefit analysis and the range of value judgements that may be applied by different interest groups, it is likely that each additional increment of technology will have a slightly different balance point. Factors and impacts that need to be considered in management of low-level wastes will be discussed and a simplified example will be used to demonstrate the difficulties that may be encountered

Cost-benefit analysis of the Swiss national policy on reducing micropollutants in treated wastewater.

Science.gov (United States)

Logar, Ivana; Brouwer, Roy; Maurer, Max; Ort, Christoph

2014-11-04

Contamination of freshwater with micropollutants (MPs) is a growing concern worldwide. Even at very low concentrations, MPs can have adverse effects on aquatic ecosystems and possibly also on human health. Switzerland is one of the first countries to start implementing a national policy to reduce MPs in the effluents of municipal sewage treatment plants (STPs). This paper estimates the benefits of upgrading STPs based on public's stated preferences. To assess public demand for the reduction of the environmental and health risks of MPs, we conducted a choice experiment in a national online survey. The results indicate that the average willingness to pay per household is CHF 100 (US$ 73) annually for reducing the potential environmental risk of MPs to a low level. These benefits, aggregated over households in the catchment of the STPs to be upgraded, generate a total annual economic value of CHF 155 million (US$ 113 million). This compares with estimated annual costs for upgrading 123 STPs of CHF 133 million (US$ 97 million) or CHF 86 (US$ 63) per household connected to these STPs. Hence, a cost-benefit analysis justifies the investment decision from an economic point of view and supports the implementation of the national policy in the ongoing political discussion.

A cost-benefit analysis of alternatively fueled buses with special considerations for V2G technology

International Nuclear Information System (INIS)

Shirazi, Yosef; Carr, Edward; Knapp, Lauren

2015-01-01

Motivated by climate, health and economic considerations, alternatively-fueled bus fleets have emerged worldwide. Two popular alternatives are compressed natural gas (CNG) and electric vehicles. The latter provides the opportunity to generate revenue through vehicle-to-grid (V2G) services if properly equipped. This analysis conducts a robust accounting of the costs of diesel, CNG and battery-electric powertrains for school buses. Both marginal and fleet-wide scenarios are explored. Results indicate that the marginal addition of neither a small CNG nor a small V2G-enabled electric bus is cost effective at current prices. Contrary to previous findings, a small V2G-enabled electric bus increases net present costs by $7,200/seat relative to diesel for a Philadelphia, PA school district. A small CNG bus increases costs by $1,200/seat relative to diesel. This analysis is the first to quantify and include the economic implications of cold temperature extremes on electric vehicle battery operations, and the lower V2G revenues that result. Additional costs and limitations imposed by electric vehicles performing V2G are frequently overlooked in the literature and are explored here. If a variety of technical, legal, and economic challenges are overcome, a future eBus may be economical. - Highlights: • We present a robust cost-benefit analysis of various bus technologies. • Diesel is a low-cost technology at current prices. • CNG represents slightly higher costs on a marginal bus basis. • V2G-enabled electric buses are not cost-effective at current prices. • We identify frequently overlooked costs and challenges to V2G implementation.

Corporate-sponsored low-cost screening program at the workplace

International Nuclear Information System (INIS)

Kessler, H.B.; Engstrom, P.F.; Devine, P.J.; Rimer, B.; Gatenby, R.A.

1989-01-01

This paper reports the results of a mobile screening mammography program offered to employees of a large corporation. The examination was available to women 35 or older. Women were charged $30 for a standard two-view examination; the remaining costs were underwritten by the employer. In the first year of the program 3,627 examination were performed; 63 biopsies were recommended. To date, 54 biopsies have been completed. Nine cancers were identified; seven state I and two stage II cancers were diagnosed. The distribution and prevalence rates were similar to (slightly higher than) statewide statistics. Mobile screening programs conducted at the worksite provide an inexpensive convenient alternation to more traditional screening programs. The inherent advantages of this program are the low cost, relative ease with which the examination can be obtained, and the positive role that corporate medical personnel assume in encouraging participation

Analysis of policy alternatives on the public acceptance of nuclear power plant in Korea

International Nuclear Information System (INIS)

Choi, Young-Sung; Lee, Byong-Whi

1995-01-01

Public acceptance has become an important factor in nuclear power program particularly after Chernobyl accident and recent rapid democratization in Korea. A method reflecting public opinions in order to improve public acceptance is to find out the public preference values for its policy alternatives. In this study, the conjoint analysis was applied to find out the quantitative values of public preferences for twelve policy alternatives to support communities surrounding nuclear power plants in Korea. To implement the analysis, questionnaires of trade-off matrix form were mailed to the science teachers of middle or high school through-out the country who had the experience of visiting nuclear power plant. The quantitative preference values for potential policy alternatives were estimated, which made it possible to forecast the effectiveness of each option. It was revealed that the improvement of reactor safety 100 times and the establishment of civilian monitoring system for nuclear safety would be two best options to improve public acceptance of nuclear power in Korea. (author)

Impact of an Advanced Imaging Utilization Review Program on Downstream Health Care Utilization and Costs for Low Back Pain.

Science.gov (United States)

Graves, Janessa M; Fulton-Kehoe, Deborah; Jarvik, Jeffrey G; Franklin, Gary M

2018-06-01

Early magnetic resonance imaging (MRI) for acute low back pain (LBP) has been associated with increased costs, greater health care utilization, and longer disability duration in workers' compensation claimants. To assess the impact of a state policy implemented in June 2010 that required prospective utilization review (UR) for early MRI among workers' compensation claimants with LBP. Interrupted time series. In total, 76,119 Washington State workers' compensation claimants with LBP between 2006 and 2014. Proportion of workers receiving imaging per month (MRI, computed tomography, radiographs) and lumbosacral injections and surgery; mean total health care costs per worker; mean duration of disability per worker. Measures were aggregated monthly and attributed to injury month. After accounting for secular trends, decreases in early MRI [level change: -5.27 (95% confidence interval, -4.22 to -6.31); trend change: -0.06 (-0.01 to -0.12)], any MRI [-4.34 (-3.01 to -5.67); -0.10 (-0.04 to -0.17)], and injection [trend change: -0.12 (-0.06 to -0.18)] utilization were associated with the policy. Radiograph utilization increased in parallel [level change: 2.46 (1.24-3.67)]. In addition, the policy resulted in significant decreasing changes in mean costs per claim, mean disability duration, and proportion of workers who received disability benefits. The policy had no effect on computed tomography or surgery utilization. The UR policy had discernable effects on health care utilization, costs, and disability. Integrating evidence-based guidelines with UR can improve quality of care and patient outcomes, while reducing use of low-value health services.

Summing up the parts. Combining Policy Instruments for Least-Cost Climate Mitigation Strategies

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

Meeting the enormous challenge of decarbonising world energy systems will require a rapid expansion of investment in clean technologies on a global scale. Mobilising these resources will be a daunting task, and it is important to undertake the transition at the lowest cost possible. This paper seeks to provide some guidance on climate change policy-making within real-world constraints, focusing on the justification of policies to supplement a carbon price, interactions between carbon pricing and supplementary policies, and management of these interactions to enable a least-cost policy response.

Cost-effectiveness evaluation of alternatives in environmental impact statements

International Nuclear Information System (INIS)

Weiser, A.L.

1977-01-01

Although it has been Federal government officials who have been accused in courts of law with mismanagement with regard to the consideration of alternatives in the environmental impact statement, the responsibility for systematically considering all alternatives to a proposed project remains with project decisionmakers in the Federal, state, or local levels of government and in industry. By applying the techniques of system cost-effectiveness analysis to the assessment of alternatives, it is believed that management will be able to clearly demonstrate that the selection of the proposed approach was neither arbitrary nor capricious. A rational approach to the assessment of alternatives should aid in meeting the mandates of environmental legislation and EIS guidelines, and it should eliminate the merit of any plaintiff's charge of mismanagement with regard to management's consideration of alternatives. Even though many interfaces between the proposed system and the environment cannot as yet be objectively quantified, application of CE techniques will demonstrate that a rigorous exploration and objective evaluation has been applied to the consideration of alternatives with respect to project objectives, financial conditions, and adverse environmental impacts

Understanding the cost bases of Space Shuttle pricing policies for commercial and foreign customers

Science.gov (United States)

Stone, Barbara A.

1984-01-01

The principles and underlying cost bases of the 1977 and 1982 Space Shuttle Reimbursement Policies are compared and contrasted. Out-of-pocket cost recovery has been chosen as the base of the price for the 1986-1988 time period. With this cost base, it is NASA's intent to recover the total cost of consumables and the launch and flight operations costs added by commercial and foreign customers over the 1986-1988 time period. Beyond 1988, NASA intends to return to its policy of full cost recovery.

The differential impact of low-carbon technologies on climate change mitigation cost under a range of socioeconomic and climate policy scenarios

International Nuclear Information System (INIS)

Barron, Robert; McJeon, Haewon

2015-01-01

This paper considers the effect of several key parameters of low carbon energy technologies on the cost of abatement. A methodology for determining the minimum level of performance required for a parameter to have a statistically significant impact on CO 2 abatement cost is developed and used to evaluate the impact of eight key parameters of low carbon energy supply technologies on the cost of CO 2 abatement. The capital cost of nuclear technology is found to have the greatest impact of the parameters studied. The cost of biomass and CCS technologies also have impacts, while their efficiencies have little, if any. Sensitivity analysis of the results with respect to population, GDP, and CO 2 emission constraint show that the minimum performance level and impact of nuclear technologies is consistent across the socioeconomic scenarios studied, while the other technology parameters show different performance under higher population, lower GDP scenarios. Solar technology was found to have a small impact, and then only at very low costs. These results indicate that the cost of nuclear is the single most important driver of abatement cost, and that trading efficiency for cost may make biomass and CCS technologies more competitive. - Highlights: • The impact of low carbon energy technology on abatement cost is considered. • Nuclear has the largest impact among technologies considered. • Cost has higher impact than efficiency for biomass technologies. • Biomass technologies generally have larger impacts than carbon capture. • Biomass technologies are more valuable in low GDP, high population scenarios

Development of a low-cost inductively coupled argon plasma

International Nuclear Information System (INIS)

Ripson, P.A.M.

1983-01-01

The aim of this investigation is to drastically reduce running costs of an inductively coupled plasma. This is done by reducing the argon consumption from 20 l/min to about 1 l/min. First, a sample introduction system operating on 0.1 l/min of carrier argon is described. This system ensures a high ratio of plasma argon and carrier argon even at the low total argon consumptions intended. Next, the developed low consumption plasma is presented. In the proposed design, air is blown perpendicularly against the outside of the torch. A different coil has been developed to make air-cooling efficient. Preliminary data on coupling efficiency for the air-cooled plasma are presented. A similarly low argon consumption has been achieved with water as an external coolant medium. It is concluded that a cheaper alternative to the current ICP has become available. (Auth.)

Cost-Effectiveness Analysis of Unsafe Abortion and Alternative First ...

African Journals Online (AJOL)

To explore the policy implications of increasing access to safe abortion in Nigeria and Ghana, we developed a computer-based decision analytic model which simulates induced abortion and its potential complications in a cohort of women, and comparatively assessed the cost-effectiveness of unsafe abortion and three ...

Alternatives for operational cost reduction in oil pipelines; Alternativas para reducao de custos energeticos operacionais em oleodutos

Energy Technology Data Exchange (ETDEWEB)

Krause, Philipe Barroso; Carneiro, Leonardo Motta; Pires, Luis Fernando Goncalves [Pontificia Universidade Catolica do Rio de Janeiro (SIMDUT/DEM/ PUC-Rio), RJ (Brazil). Dept. de Engenharia Mecancia. Nucleo de Simulacao Termo-Hidraulica de Dutos

2012-07-01

This paper intends to give a brief overview of some cost reduction alternatives in oil pipelines, to optimize the pipeline operation. Four different alternatives are presented, based on previous studies made on existing pipelines, to demonstrate the response obtained with these solutions. Pipeline operation, especially on mature ones, tends to have a high operational cost, be by tradition, the aging of the installation, change of operational characteristics - such as nominal flow, product, or even flow direction - for which the pipeline wasn't originally designed. The alternatives showed allow for an increase survival time of the pipeline, without resorting to major changes, such as replacement of pipes or adding pumping stations to the system. The alternative studied varies from no implementation cost to high installation cost or operational cost increase, depending on the system and the alternative chosen. From changing the pump arrays during operation or changing the products viscosity with different blends, that represent virtually no cost to the pipeline operation, to the use of VFDs, with a high installation cost or DRA, which increase the operational cost. (author)

Alternative fuel buses currently in use in China: Life-cycle fossil energy use, GHG emissions and policy recommendations

International Nuclear Information System (INIS)

Ou Xunmin; Zhang Xiliang; Chang Shiyan

2010-01-01

The Chinese government has enacted policies to promote alternative vehicle fuels (AVFs) and alternative fuel vehicles (AFVs), including city bus fleets. The life cycle (LC), energy savings (ES) and GHG reduction (GR) profiles of AVFs/AFVs are critical to those policy decisions. The well-to-wheels module of the Tsinghua-CA3EM model is employed to investigate actual performance data. Compared with conventional buses, AFVs offer differences in performance in terms of both ES and GR. Only half of the AFVs analyzed demonstrate dual benefits. However, all non-oil/gas pathways can substitute oil/gas with coal. Current policies seek to promote technology improvements and market creation initiatives within the guiding framework of national-level diversification and district-level uniformity. Combined with their actual LC behavior and in keeping with near- and long-term strategies, integrated policies should seek to (1) apply hybrid electric technology to diesel buses; (2) encourage NG/LPG buses in gas-abundant cities; (3) promote commercialize electric buses or plug-in capable vehicles through battery technology innovation; (4) support fuel cell buses and hydrogen technology R and D for future potential applications; and (5) conduct further research on boosting vehicle fuel efficiency, applying low-carbon transportation technologies, and addressing all resultant implications of coal-based transportation solutions to human health and natural resources.

Alternative fuel buses currently in use in China: Life-cycle fossil energy use, GHG emissions and policy recommendations

Energy Technology Data Exchange (ETDEWEB)

Ou Xunmin, E-mail: oxm07@mails.tsinghua.edu.c [School of Public Policy and Management (SPPM), Tsinghua University, Beijing 100084 (China); China Automotive Energy Research Center (CAERC), Tsinghua University, Beijing 100084 (China); Institute of Energy, Environment and Economy (3E), Tsinghua University, Beijing 100084 (China); Zhang Xiliang, E-mail: zhang_xl@tsinghua.edu.c [China Automotive Energy Research Center (CAERC), Tsinghua University, Beijing 100084 (China); Institute of Energy, Environment and Economy (3E), Tsinghua University, Beijing 100084 (China); Chang Shiyan [China Automotive Energy Research Center (CAERC), Tsinghua University, Beijing 100084 (China); Institute of Energy, Environment and Economy (3E), Tsinghua University, Beijing 100084 (China)

2010-01-15

The Chinese government has enacted policies to promote alternative vehicle fuels (AVFs) and alternative fuel vehicles (AFVs), including city bus fleets. The life cycle (LC), energy savings (ES) and GHG reduction (GR) profiles of AVFs/AFVs are critical to those policy decisions. The well-to-wheels module of the Tsinghua-CA3EM model is employed to investigate actual performance data. Compared with conventional buses, AFVs offer differences in performance in terms of both ES and GR. Only half of the AFVs analyzed demonstrate dual benefits. However, all non-oil/gas pathways can substitute oil/gas with coal. Current policies seek to promote technology improvements and market creation initiatives within the guiding framework of national-level diversification and district-level uniformity. Combined with their actual LC behavior and in keeping with near- and long-term strategies, integrated policies should seek to (1) apply hybrid electric technology to diesel buses; (2) encourage NG/LPG buses in gas-abundant cities; (3) promote commercialize electric buses or plug-in capable vehicles through battery technology innovation; (4) support fuel cell buses and hydrogen technology R and D for future potential applications; and (5) conduct further research on boosting vehicle fuel efficiency, applying low-carbon transportation technologies, and addressing all resultant implications of coal-based transportation solutions to human health and natural resources.

Alternative fuel buses currently in use in China. Life-cycle fossil energy use, GHG emissions and policy recommendations

Energy Technology Data Exchange (ETDEWEB)

Ou, Xunmin [School of Public Policy and Management (SPPM), Tsinghua University, Beijing 100084 (China); China Automotive Energy Research Center (CAERC), Tsinghua University, Beijing 100084 (China); Institute of Energy, Environment and Economy (3E), Tsinghua University, Beijing 100084 (China); Zhang, Xiliang; Chang, Shiyan [China Automotive Energy Research Center (CAERC), Tsinghua University, Beijing 100084 (China); Institute of Energy, Environment and Economy (3E), Tsinghua University, Beijing 100084 (China)

2010-01-15

The Chinese government has enacted policies to promote alternative vehicle fuels (AVFs) and alternative fuel vehicles (AFVs), including city bus fleets. The life cycle (LC), energy savings (ES) and GHG reduction (GR) profiles of AVFs/AFVs are critical to those policy decisions. The well-to-wheels module of the Tsinghua-CA3EM model is employed to investigate actual performance data. Compared with conventional buses, AFVs offer differences in performance in terms of both ES and GR. Only half of the AFVs analyzed demonstrate dual benefits. However, all non-oil/gas pathways can substitute oil/gas with coal. Current policies seek to promote technology improvements and market creation initiatives within the guiding framework of national-level diversification and district-level uniformity. Combined with their actual LC behavior and in keeping with near- and long-term strategies, integrated policies should seek to (1) apply hybrid electric technology to diesel buses; (2) encourage NG/LPG buses in gas-abundant cities; (3) promote commercialize electric buses or plug-in capable vehicles through battery technology innovation; (4) support fuel cell buses and hydrogen technology R and D for future potential applications; and (5) conduct further research on boosting vehicle fuel efficiency, applying low-carbon transportation technologies, and addressing all resultant implications of coal-based transportation solutions to human health and natural resources. (author)

Bridging environmental and financial cost of dairy production: A case study of Irish agricultural policy.

Science.gov (United States)

Chen, Wenhao; Holden, Nicholas M

2018-02-15

The Irish agricultural policy 'Food Harvest 2020' is a roadmap for sectoral expansion and Irish dairy farming is expected to intensify, which could influence the environmental and economic performance of Irish milk production. Evaluating the total environmental impacts and the real cost of Irish milk production is a key step towards understanding the possibility of sustainable production. This paper addresses two main issues: aggregation of environmental impacts of Irish milk production by monetization, to understand the real cost of Irish milk production, including the environmental costs; and the effect of the agricultural policy 'Food Harvest 2020' on total cost (combining financial cost and environmental cost) of Irish milk production. This study used 2013 Irish dairy farming as a baseline, and defined 'bottom', 'target' and 'optimum' scenarios, according to the change of elementary inputs required to meet agricultural policy ambitions. The study demonstrated that the three monetization methods, Stepwise 2006, Eco-cost 2012 and EPS 2000, could be used for aggregating different environmental impacts into monetary unit, and to provide an insight for evaluating policy related to total environmental performance. The results showed that the total environmental cost of Irish milk production could be greater than the financial cost (up to €0.53/kg energy corrected milk). The dairy expansion policy with improved herbage utilization and fertilizer application could reduce financial cost and minimize the total environmental cost of per unit milk produced. Copyright © 2017 Elsevier B.V. All rights reserved.

Decarbonizing the Global Economy - An Integrated Assessment of Low Carbon Emission Scenarios proposed in Climate Policy

Science.gov (United States)

Hokamp, Sascha; Khabbazan, Mohammad Mohammadi

2017-04-01

In 2015, the Conference of the Parties (COP 21) reaffirmed to targeting the global mean temperature rise below 2 °C in 2100 while finding no consent on decarbonizing the global economy, and instead, the final agreement called for enhanced scientific investigation of low carbon emission scenarios (UNFCC, 2015). In addition, the Climate Action Network International (CAN) proposes Special Reports to address decarbonization and low carbon development including 1.5 °C scenarios (IPCC, 2016). In response to these developments, we investigate whether the carbon emission cuts, in accordance with the recent climate policy proposals, may reach the climate target. To tackle this research question, we employ the coupled climate-energy-economy integrated assessment Model of INvestment and endogenous technological Development (MIND, cf. Edenhofer et al., 2005, Neubersch et al. 2014). Extending MIND's climate module to the two-box version used in the Dynamic Integrated model of Climate and the Economy (DICE, cf. Nordhaus and Sztorc, 2013, Nordhaus 2014), we perform a cost-effectiveness analysis with constraints on anthropogenic carbon emissions. We show that a climate policy scenario with early decarbonization complies with the 2° C climate target, even without Carbon Capturing and Storage (CCS) or negative emissions (see van Vuuren et al., 2013, for negative emissions). However, using emission inertia of 3.7 percent annually, reflecting the inflexibility on transforming the energy sector, we find a climate policy with moderately low emissions from 2100 onwards at a cost in terms of Balanced Growth Equivalents (BGE, cf. Anthoff and Tol, 2009) of 0.764 % that requires an early (2035 vs. 2120) peak of investments in renewable energy production compared to a business-as-usual scenario. Hence, decarbonizing the global economy and achieving the 2 °C target might still be possible before 2100, but the window of opportunity is beginning to close. References: Anthoff, D., and Tol, R

A study of low-cost, robust assistive listening system (ALS) based on digital wireless technology.

Science.gov (United States)

Israsena, P; Dubsok, P; Pan-Ngum, S

2008-11-01

We have developed a simple, low-cost digital wireless broadcasting system prototype, intended for a classroom of hearing impaired students. The system is designed to be a low-cost alternative to an existing FM system. The system implemented is for short-range communication, with a one-transmitter, multiple-receiver configuration, which is typical for these classrooms. The data is source-coded for voice-band quality, FSK modulated, and broadcasted via a 915 MHz radio frequency. A DES encryption can optionally be added for better information security. Test results show that the system operating range is approximately ten metres, and the sound quality is close to telephone quality as intended. We also discuss performance issues such as sound, power and size, as well as transmission protocols. The test results are the proof of concept that the prototype is a viable alternative to an existing FM system. Improvements can be made to the system's sound quality via techniques such as channel coding, which is also discussed.

Forks in the Road. Alternative Routes for International Climate Policies and their Implications for the Netherlands

International Nuclear Information System (INIS)

Slingerland, S.; Meyer, L.; Van Vuuren, D.; Den Elzen, M.

2011-11-01

Several scenarios are possible for future international climate policies, each with a different role in the climate negotiations under the United Nations Framework Convention on Climate Change (UNFCCC). These scenarios assume policies that are comparable to the current policies, as well as more fragmented and more integrated international climate policies. The various alternative routes have been assessed with respect to their potential consequences. These assessments showed that none of the proposed routes could fully replace the current negotiation process under the UNFCCC, but rather that they could contribute to generating societal support for future climate policies. In addition, the report presents an analysis of how the Netherlands could use this development of alternative routes for international climate policy. Possible responses by the Netherlands to each of these scenarios would depend on the degree to which climate change as a policy topic is considered a priority in the Netherlands.

Air pollution co-benefits of low carbon policies in road transport: a sub-national assessment for India

Science.gov (United States)

Mittal, Shivika; Hanaoka, Tatsuya; Shukla, Priyadarshi R.; Masui, Toshihiko

2015-08-01

This letter assesses low carbon scenarios for India at the subnational level in the passenger road transport sector. We estimate the future passenger mobility demand and assess the impact of carbon mitigation policies using the Asia-Pacific Integrated Assessment/Enduse models. This letter focuses on the transitions of energy and emissions of passenger transport in India in alternate scenarios i.e. the business-as-usual scenario and a low carbon scenario that aligns to the 2 °C temperature stabilization target agreed under the global climate change negotiations. The modelling results show that passenger mobility demand will rise in all sub-national regions of India in the coming few decades. However, the volume and modal structure will vary across regions. Modelling assessment results show that aligning global low carbon policies with local policies has potential to deliver significant air quality co-benefits. This analysis provides insights into the comparative dynamics of environmental policymaking at sub-national levels.

Air pollution co-benefits of low carbon policies in road transport: a sub-national assessment for India

International Nuclear Information System (INIS)

Mittal, Shivika; Hanaoka, Tatsuya; Masui, Toshihiko; Shukla, Priyadarshi R

2015-01-01

This letter assesses low carbon scenarios for India at the subnational level in the passenger road transport sector. We estimate the future passenger mobility demand and assess the impact of carbon mitigation policies using the Asia–Pacific Integrated Assessment/Enduse models. This letter focuses on the transitions of energy and emissions of passenger transport in India in alternate scenarios i.e. the business-as-usual scenario and a low carbon scenario that aligns to the 2 °C temperature stabilization target agreed under the global climate change negotiations. The modelling results show that passenger mobility demand will rise in all sub-national regions of India in the coming few decades. However, the volume and modal structure will vary across regions. Modelling assessment results show that aligning global low carbon policies with local policies has potential to deliver significant air quality co-benefits. This analysis provides insights into the comparative dynamics of environmental policymaking at sub-national levels. (letter)

Cost-effectiveness of tobacco control policies and programmes targeting adolescents: a systematic review.

Science.gov (United States)

Leão, Teresa; Kunst, Anton E; Perelman, Julian

2018-02-01

Consistent evidence shows the importance of preventing smoking at young ages, when health behaviours are formed, with long-term consequences on health and survival. Although tobacco control policies and programmes targeting adolescents are widely promoted, the cost-effectiveness of such interventions has not been systematically documented. We performed a systematic review on the cost-effectiveness of policies and programmes preventing tobacco consumption targeting adolescents. We systematically reviewed literature on the (i) cost and effectiveness of (ii) prevention policies targeting (iii) smoking by (iv) adolescents. PubMed, Web of Science, Cochrane, CEA-TUFTS, Health Economic Evaluations, Wiley Online Library, Centre for Reviews and Dissemination Database, the National Institute for Health and Care Excellence and Google Scholar databases were used, and Google search engine was used for other grey literature review. We obtained 793 full-text papers and 19 grey literature documents, from which 16 studies fulfilled the inclusion criteria. Of these, only one was published in the last 5 years, and 15 were performed in high-income countries. Eight analyzed the cost-effectiveness of school-based programmes, five focused on media campaigns and three on legal bans. Policies and programmes were found to be cost-effective in all studies, and both effective and cost-saving in about half of the studies. Evidence is scarce and relatively obsolete, and rarely focused on the evaluation of legal bans. Moreover, no comparisons have been made between different interventions or across different contexts and implementation levels. However, all studies conclude that smoking prevention policies and programmes amongst adolescents are greatly worth their costs. © The Author 2017. Published by Oxford University Press on behalf of the European Public Health Association.

Development of Low Cost Soil Stabilization Using Recycled Material

Science.gov (United States)

Ahmad, F.; Yahaya, A. S.; Safari, A.

2016-07-01

Recycled tyres have been used in many geotechnical engineering projects such as soil improvement, soil erosion and slope stability. Recycled tyres mainly in chip and shredded form are highly compressible under low and normal pressures. This characteristic would cause challenging problems in some applications of soil stabilization such as retaining wall and river bank projects. For high tensile stress and low tensile strain the use of fiberglass would be a good alternative for recycled tyre in some cases. To evaluate fiberglass as an alternative for recycled tyre, this paper focused on tests of tensile tests which have been carried out between fiberglass and recycled tyre strips. Fibreglass samples were produced from chopped strand fibre mat, a very low-cost type of fibreglass, which is cured by resin and hardener. Fibreglass samples in the thickness of 1 mm, 2 mm, 3 mm and 4 mm were developed 100 mm x 300 mm pieces. It was found that 3 mm fibreglass exhibited the maximum tensile load (MTL) and maximum tensile stress (MTS) greater than other samples. Statistical analysis on 3 mm fibreglass indicated that in the approximately equal MTL fibreglass samples experienced 2% while tyre samples experienced 33.9% ultimate tensile strain (UTST) respectively. The results also showed an approximately linear relationship between stress and strain for fibreglass samples and Young's modulus (E), ranging from 3581 MPa to 4728 MPa.

Low energy, low cost, efficient CO{sub 2} capture

Energy Technology Data Exchange (ETDEWEB)

Michael C. Trachtenberg; Lihong Bao; David A. Smith; Remy Dumortier [Carbozyme, Inc., Monmouth Junction, NJ (United States)

2006-07-01

This paper discusses the development and some characteristics of a new, enzyme-based, contained liquid membrane contactor to capture CO{sub 2}. The enzyme carbonic anhydrase catalyzes the removal of CO{sub 2} while the membrane contactor increases the surface area to allow the reduction of the size of the system. The modular system design is easily scaled to any required size reducing the investment costs. The system captures CO{sub 2} at a low energy and low cost promising to be a cost effective technology for CO{sub 2} capture. 5 refs., 7 figs.

Cost-effectiveness analysis of salt reduction policies to reduce coronary heart disease in Syria, 2010-2020.

Science.gov (United States)

Wilcox, Meredith L; Mason, Helen; Fouad, Fouad M; Rastam, Samer; al Ali, Radwan; Page, Timothy F; Capewell, Simon; O'Flaherty, Martin; Maziak, Wasim

2015-01-01

This study presents a cost-effectiveness analysis of salt reduction policies to lower coronary heart disease in Syria. Costs and benefits of a health promotion campaign about salt reduction (HP); labeling of salt content on packaged foods (L); reformulation of salt content within packaged foods (R); and combinations of the three were estimated over a 10-year time frame. Policies were deemed cost-effective if their cost-effectiveness ratios were below the region's established threshold of $38,997 purchasing power parity (PPP). Sensitivity analysis was conducted to account for the uncertainty in the reduction of salt intake. HP, L, and R+HP+L were cost-saving using the best estimates. The remaining policies were cost-effective (CERs: R=$5,453 PPP/LYG; R+HP=$2,201 PPP/LYG; R+L=$2,125 PPP/LYG). R+HP+L provided the largest benefit with net savings using the best and maximum estimates, while R+L was cost-effective with the lowest marginal cost using the minimum estimates. This study demonstrated that all policies were cost-saving or cost effective, with the combination of reformulation plus labeling and a comprehensive policy involving all three approaches being the most promising salt reduction strategies to reduce CHD mortality in Syria.

Cost containment and the backdraft of competition policies.

Science.gov (United States)

Light, D W

2001-01-01

This article offers an explanation of why governments and other purchasers found competition policies attractive, and it summarizes a set of new case studies. Faced with economic slowdown and the need to retrench social services, governments felt their legitimacy threatened and sought a new approach that would legitimize controlling costs. Starting in the 1980s, a group of pro-capitalist "moral entrepreneurs" launched an international business movement focused on reducing waste in governmental and welfare services through competition and privatization. Political leaders in a number of the developed industrialized countries enthusiastically embraced "managed competition" as a way to control the costs of health care services and to make them more accountable. The dangers of implementation and the extensive market failures that are ever-present in medicine, however, led most governments to pull back. Most nations that implemented competition policies experienced a political backdraft of protest from patients and providers that swept them out of office.

The determination of optimal climate policy

International Nuclear Information System (INIS)

Aaheim, Asbjoern

2010-01-01

Analyses of the costs and benefits of climate policy, such as the Stern Review, evaluate alternative strategies to reduce greenhouse gas emissions by requiring that the cost of emission cuts in each and every year has to be covered by the associated value of avoided damage, discounted by a an exogenously chosen rate. An alternative is to optimize abatement programmes towards a stationary state, where the concentrations of greenhouse gases are stabilized and shadow prices, including the rate of discount, are determined endogenously. This paper examines the properties of optimized stabilization. It turns out that the implications for the evaluation of climate policy are substantial if compared with evaluations of the present value of costs and benefits based on exogenously chosen shadow prices. Comparisons of discounted costs and benefits tend to exaggerate the importance of the choice of discount rate, while ignoring the importance of future abatement costs, which turns out to be essential for the optimal abatement path. Numerical examples suggest that early action may be more beneficial than indicated by comparisons of costs and benefits discounted by a rate chosen on the basis of current observations. (author)

Costs without benefits? Methodological issues in assessing costs, benefits and effectiveness of water protection policies. Paper

Energy Technology Data Exchange (ETDEWEB)

Walz, R.; Schleich, J.

2000-07-01

In the last few years, the conditions for extending environmental policy in general and policy dealing with the prevention of water pollution in particular have undergone extensive changes. On the one hand, there has been indisputable considerable success in preventing water pollution which has led to less direct pressure for policy action. On the other hand, the rising sewage levies and the lower political priority assigned in general to environmental policy documented in, e. g. public opinion surveys, has led to water pollution control policy facing very different pressures of justification: more efficient use of funds, improved planning processes, proof of the achievable benefit, but also stopping the increase in levies or not hindering economic development, these or similar slogans are the objections brought against water pollution control. Regardless of how unambiguous these terms appear when used as slogans in this way, they become diffuse and unclear if regarded more closely. This paper therefore attempts to reveal the reasons for possible misunderstandings and misinterpretations on the one hand and, on the other, to reveal the basic problems and uncertainties which are necessarily linked with an assessment of costs and benefits. In order to do this, three areas are examined: level of actors and analysis, evaluation methods and assessment of costs and benefits. (orig.)

Policies for Promotion of Electric Vehicles and Factors Influencing Consumers’ Purchasing Decisions of Low Emission Vehicles

Directory of Open Access Journals (Sweden)

Matjaz Knez

2017-06-01

Full Text Available Recently different studies of green transport have become interesting for policy makers,car manufacturers, customers and energy suppliers. Many stakeholders from the publicand private sectors are investing a lot of effort to identify consumer behaviour for futureimprovements in development of green products and effective strategies, which couldaccelerate the transition to sustainable future. This paper presents the effects of electricvehicle promotional policies and customer preferences about alternative fuel vehicles.This study has shown that the electric vehicle promotional policies adopted in Sloveniahave been unsuccessful, as the share of first-time registered electric vehicles in 2013 wasbelow 1%. For different segments of people whose opinions about low emission vehiclesdiffer, different measures must be adopted. When designing promotional policies focusmust be on the most relevant factors such as the total vehicle price and fuel economy.

Update of Energy policy of Uruguay

International Nuclear Information System (INIS)

2004-08-01

The National Energy Directorate from Uruguay called a contest for Update Policy L Energy of Uruguay so as to ensure energy supply at the lowest possible cost, with greater safety and lower environmental impact and taking account efficient use of the Energy. FIEL was selected to carry out the work planned within three months and responding to a broad agenda that included the following points in the order of the Terms of Reference of the contest (TORs): 3.1. Evaluation of the existing energy policy 3.2. relative price optimization fuel 3.3. Optimization of tax policy in fuel 3.4. assessment of cost and benefits of alternative import 3.5. strategic reserve 3.6. Ambiental impacts Identification 3.7. Recommendations to improve the framework regulatory 3.8. Institutional framework for the energy sector in Uruguay 3.9. Evaluation of potential of renewable national energy resources 3.10. Energy efficiency 3.11. Action Plan for the National Energy The report presents and order of the TORs. In the first chapter updates assessment of energy policy presented in the progress report. In point 3.2 approaching the economic costs of the various energy alternatives from the parities import and cost efficient products in non tradable. Along with the environmental costs estimated in Section 3.6 is evaluated in the 3.3 How should the taxes structure to take into account externalities generating energy. In Section 3.4 discusses different options imported and in 3.5 energy supply costs are assessed count a strategic reserve, which Uruguay has decided that it is in the form of capacity thermal generation. In paragraphs 3.7 and 3.8 governing institutions is analyzed and they plan the sector, not only from a regulatory point of view but also the organization Internal DNE. In 3.9 alternatives are discussed renewable resources from national and international studies existentes, and in 3.1 updating the results of a recent study on energy efficiency by the World Bank and the case of an eventual

SELF-ASSEMBLED ROV AND PHOTOGRAMMETRIC SURVEYS WITH LOW COST TECHNIQUES

Directory of Open Access Journals (Sweden)

E. Costa

2018-05-01

Full Text Available In last years, ROVs, have been employed to explore underwater environments and have played an important role for documentation and surveys in different fields of scientific application. In 2017, the Laboratorio di Fotogrammetria of Iuav University of Venice has decided to buy an OpenRov, a low cost ROV that could be assembled by ourselves to add some external components for our necessities, to document archaeological sites. The paper is related to the photogrammetric survey for the documentation of underwater environments and to the comparison between different solutions applied on a case studio, five marble columns on a sandy bottom at 5 meters deep. On the lateral sides of the ROV, we have applied two GoPro Hero4 Session, which have documented the items both with a series of images and with a video. The geometric accuracy of the obtained 3D model has been evaluated through comparison with a photogrammetric model realized with a professional reflex camera, Nikon D610. Some targets have been topographically surveyed with a trilateration and have been used to connected in the same reference system the different models, allowing the comparisons of the point clouds. Remote Operating Vehicles offer not only safety for their operators, but are also a relatively low cost alternative. The employment of a low-cost vehicle adapted to the necessities of surveys support a request for safer, cheaper and efficient methods for exploring underwater environments.

Are vehicle travel reduction targets justified? Evaluating mobility management policy objectives such as targets to reduce VMT and increase use of alternative modes

Energy Technology Data Exchange (ETDEWEB)

Litman, T.

2009-09-17

This article presented several reasons for reforming current transportation policies to include targets to reduce vehicle miles of travel (VMT) and encourage use of alternative modes such as walking, cycling or public transit. Demographic and economic trends are increasing the demand for alternative modes, and economic competitiveness will require increased efficiency. As such, a variety of integrated transportation and land use policy reforms are needed to prepare for the future. Mobility management strategies that reduce vehicle travel include efficient road and parking pricing; more flexible zoning codes; and ridesharing incentives. Most mobility management strategies help solve a variety of problems and provide many benefits, including congestion reduction, road and parking cost savings, consumer savings, traffic safety, improved mobility for non-drivers, energy conservation, emission reductions, efficient land development, and improved public fitness and health. Improvements to public transit, road and parking pricing, and commute trip reduction programs also tend to reduce urban-peak traffic. The article suggested that VMT reduction targets are the first step in implementing mobility management policies. Although automobile travel will not disappear, it will decrease compared with current planning practices. 55 refs., 8 tabs., 6 figs.

The differential impact of low-carbon technologies on climate change mitigation cost under a range of socioeconomic and climate policy scenarios.

Energy Technology Data Exchange (ETDEWEB)

Barron, Robert W.; McJeon, Haewon C.

2015-05-01

This paper considers the effect of several key parameters of low carbon energy technologies on the cost of abatement. A methodology for determining the minimum level of performance required for a parameter to have a statistically significant impact on CO2 abatement cost is developed and used to evaluate the impact of eight key parameters of low carbon energy supply technologies on the cost of CO2 abatement. The capital cost of nuclear technology is found to have the greatest impact of the parameters studied. The cost of biomass and CCS technologies also have impacts, while their efficiencies have little, if any. Sensitivity analysis of the results with respect to population, GDP, and CO2 emission constraint show that the minimum performance level and impact of nuclear technologies is consistent across the socioeconomic scenarios studied, while the other technology parameters show different performance under higher population, lower GDP scenarios. Solar technology was found to have a small impact, and then only at very low costs. These results indicate that the cost of nuclear is the single most important driver of abatement cost, and that trading efficiency for cost may make biomass and CCS technologies more competitive.

A low-cost, Nist-traceable, high performance dielectric resonator Master Oscillator

International Nuclear Information System (INIS)

Doolittle, L.R.; Hovater, C.; Merminga, L.; Musson, J.; Wiseman, W.

1999-01-01

The current CEBAF Master Oscillator (MO) uses a quartz-based 10 MHz reference to synthesize 70 MHz and 499 MHz, which are then distributed to each of the klystron galleries on site. Due to the specialized nature of CEBAF's MO requirements, it has been determined that an in-house design and fabrication would provide a cost-effective alternative to purchasing or modifying vendor equipment. A Global Positioning System (GPS) disciplined, Direct Digital Synthesis (DDS) based MO is proposed which incorporates low-cost consumer RF components, designed for cellular communications. A 499 MHz Dielectric Resonant Oscillator (DRO) Voltage Controlled Oscillator (VCO) is phase-locked to a GPS-disciplined 10 MHz reference, and micro-tuned via a DDS, in an effort to achieve the lowest phase noise possible

Cost-effectiveness of nitrogen mitigation by alternative household wastewater management technologies.

Science.gov (United States)

Wood, Alison; Blackhurst, Michael; Hawkins, Troy; Xue, Xiaobo; Ashbolt, Nicholas; Garland, Jay

2015-03-01

Household wastewater, especially from conventional septic systems, is a major contributor to nitrogen pollution. Alternative household wastewater management technologies provide similar sewerage management services but their life cycle costs and nitrogen flow implications remain uncertain. This paper addresses two key questions: (1) what are the total costs, nitrogen mitigation potential, and cost-effectiveness of a range of conventional and alternative municipal wastewater treatment technologies, and (2) what uncertainties influence these outcomes and how can we improve our understanding of these technologies? We estimate a household nitrogen mass balance for various household wastewater treatment systems and combine this mass balance with life cycle cost assessment to calculate the cost-effectiveness of nitrogen mitigation, which we define as nitrogen removed from the local watershed. We apply our methods to Falmouth, MA, where failing septic systems have caused heightened eutrophication in local receiving water bodies. We find that flushing and dry (composting) urine-diversion toilets paired with conventional septic systems for greywater management demonstrate the lowest life cycle cost and highest cost-effectiveness (dollars per kilogram of nitrogen removed from the watershed). Composting toilets are also attractive options in some cases, particularly best-case nitrogen mitigation. Innovative/advanced septic systems designed for high-level nitrogen removal are cost-competitive options for newly constructed homes, except at their most expensive. A centralized wastewater treatment plant is the most expensive and least cost-effective option in all cases. Using a greywater recycling system with any treatment technology increases the cost without adding any nitrogen removal benefits. Sensitivity analysis shows that these results are robust considering a range of cases and uncertainties. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Current enhancement in crystalline silicon photovoltaic by low-cost nickel silicide back contact

KAUST Repository

Bahabry, R. R.; Gumus, A.; Kutbee, A. T.; Wehbe, N.; Ahmed, S. M.; Ghoneim, M. T.; Lee, K. -T.; Rogers, J. A.; Hussain, M. M.

2016-01-01

We report short circuit current (Jsc) enhancement in crystalline silicon (C-Si) photovoltaic (PV) using low-cost Ohmic contact engineering by integration of Nickel mono-silicide (NiSi) for back contact metallization as an alternative to the status quo of using expensive screen printed silver (Ag). We show 2.6 mA/cm2 enhancement in the short circuit current (Jsc) and 1.2 % increment in the efficiency by improving the current collection due to the low specific contact resistance of the NiSi on the heavily Boron (B) doped Silicon (Si) interface.

Current enhancement in crystalline silicon photovoltaic by low-cost nickel silicide back contact

KAUST Repository

Bahabry, R. R.

2016-11-30

We report short circuit current (Jsc) enhancement in crystalline silicon (C-Si) photovoltaic (PV) using low-cost Ohmic contact engineering by integration of Nickel mono-silicide (NiSi) for back contact metallization as an alternative to the status quo of using expensive screen printed silver (Ag). We show 2.6 mA/cm2 enhancement in the short circuit current (Jsc) and 1.2 % increment in the efficiency by improving the current collection due to the low specific contact resistance of the NiSi on the heavily Boron (B) doped Silicon (Si) interface.

Low-cost carriers fare competition effect

NARCIS (Netherlands)

Carmona Benitez, R.B.; Lodewijks, G.

2010-01-01

This paper examines the effects that low-cost carriers (LCC’s) produce when entering new routes operated only by full-service carriers (FSC’s) and routes operated by low-cost carriers in competition with full-service carriers. A mathematical model has been developed to determine what routes should

Low-Cost Spectral Sensor Development Description.

Energy Technology Data Exchange (ETDEWEB)

Armijo, Kenneth Miguel; Yellowhair, Julius

2014-11-01

Solar spectral data for all parts of the US is limited due in part to the high cost of commercial spectrometers. Solar spectral information is necessary for accurate photovoltaic (PV) performance forecasting, especially for large utility-scale PV installations. A low-cost solar spectral sensor would address the obstacles and needs. In this report, a novel low-cost, discrete- band sensor device, comprised of five narrow-band sensors, is described. The hardware is comprised of commercial-off-the-shelf components to keep the cost low. Data processing algorithms were developed and are being refined for robustness. PV module short-circuit current ( I sc ) prediction methods were developed based on interaction-terms regression methodology and spectrum reconstruction methodology for computing I sc . The results suggest the computed spectrum using the reconstruction method agreed well with the measured spectrum from the wide-band spectrometer (RMS error of 38.2 W/m 2 -nm). Further analysis of computed I sc found a close correspondence of 0.05 A RMS error. The goal is for ubiquitous adoption of the low-cost spectral sensor in solar PV and other applications such as weather forecasting.

Energy alternatives

International Nuclear Information System (INIS)

Sweet, C.

1987-01-01

The designated successor to fossil fuels is nuclear fission/fusion and that turns out to be problematic. Alternative Energy Systems have great potential but political forces seem to be hampering their development and introduction. The technologies are flexible in their use and scale of operation. The learning curve will not be short but neither will it be as long and as costly as nuclear power. It is time that this is recognised and some serious rethinking takes place in what presently passes for energy policies both in the industrialised countries and in the Third World. Alternative energy systems are defined and some of them which are relevant to the United Kingdom are discussed. (author)

National Environmental Policy Act Hazards Assessment for the TREAT Alternative

Energy Technology Data Exchange (ETDEWEB)

Christensen, Boyd D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Schafer, Annette L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2014-02-01

This document provides an assessment of hazards as required by the National Environmental Policy Act for the alternative of restarting the reactor at the Transient Reactor Test (TREAT) facility by the Resumption of Transient Testing Program. Potential hazards have been identified and screening level calculations have been conducted to provide estimates of unmitigated dose consequences that could be incurred through this alternative. Consequences considered include those related to use of the TREAT Reactor, experiment assembly handling, and combined events involving both the reactor and experiments. In addition, potential safety structures, systems, and components for processes associated with operating TREAT and onsite handling of nuclear fuels and experiments are listed. If this alternative is selected, a safety basis will be prepared in accordance with 10 CFR 830, “Nuclear Safety Management,” Subpart B, “Safety Basis Requirements.”

National Environmental Policy Act Hazards Assessment for the TREAT Alternative

Energy Technology Data Exchange (ETDEWEB)

Boyd D. Christensen; Annette L. Schafer

2013-11-01

This document provides an assessment of hazards as required by the National Environmental Policy Act for the alternative of restarting the reactor at the Transient Reactor Test (TREAT) facility by the Resumption of Transient Testing Program. Potential hazards have been identified and screening level calculations have been conducted to provide estimates of unmitigated dose consequences that could be incurred through this alternative. Consequences considered include those related to use of the TREAT Reactor, experiment assembly handling, and combined events involving both the reactor and experiments. In addition, potential safety structures, systems, and components for processes associated with operating TREAT and onsite handling of nuclear fuels and experiments are listed. If this alternative is selected, a safety basis will be prepared in accordance with 10 CFR 830, “Nuclear Safety Management,” Subpart B, “Safety Basis Requirements.”

The Cost of Jointness: Insights from Environmental Monitoring Systems in Low-Earth Orbit

Energy Technology Data Exchange (ETDEWEB)

Dwyer, Morgan Maeve [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2014-09-01

This report summarizes the results of doctoral research that explored the cost impact of acquiring complex government systems jointly. The report begins by reviewing recent evidence that suggests that joint programs experience greater cost growth than non-joint programs. It continues by proposing an alternative approach for studying cost growth on government acquisition programs and demonstrates the utility of this approach by applying it to study the cost of jointness on three past programs that developed environmental monitoring systems for low-Earth orbit. Ultimately, the report concludes that joint programs' costs grow when the collaborating government agencies take action to retain or regain their autonomy. The report provides detailed qualitative and quantitative data in support of this conclusion and generalizes its findings to other joint programs that were not explicitly studied here. Finally, it concludes by presenting a quantitative model that assesses the cost impacts of jointness and by demonstrating how government agencies can more effectively architect joint programs in the future.

Long term warranty and after sales service concept, policies and cost models

CERN Document Server

Rahman, Anisur

2015-01-01

This volume presents concepts, policies and cost models for various long-term warranty and maintenance contracts. It offers several numerical examples for estimating costs to both the manufacturer and consumer. Long-term warranties and maintenance contracts are becoming increasingly popular, as these types of aftersales services provide assurance to consumers that they can enjoy long, reliable service, and protect them from defects and the potentially high costs of repairs. Studying long-term warranty and service contracts is important to manufacturers and consumers alike, as offering long-term warranty and maintenance contracts produce additional costs for manufacturers / service providers over the product’s service life. These costs must be factored into the price, or the manufacturer / dealer will incur losses instead of making a profit. On the other hand, the buyer / consumer needs to weigh the cost of maintaining it over its service life and to decide whether or not these policies are worth purchasing....

An evaluation on the disposal alternatives for low- and intermediate- level radwaste (II)

International Nuclear Information System (INIS)

Park, Hun Hwee; Han, Kyung Won; Hahn, Pil Soo; Lee, Han Soo; Cho, Won Jin; Lee, Jae Dwan; Park, Chung Kyun; Lee, Myung Joo; Choi, Heui Joo; Lee, Youn Myoung

1988-02-01

An evaluation on the radioactive waste disposal alternatives for the low-and intermediate level wastes being produced from nuclear power generation and radioisotope application was carried out in view of the radiological safety, socio-political aspects and repository construction economics. Three types of possible alternatives-sample shallow land disposal method, engineered shallow land disposal method and engineered rock cavern disposal method are investigated. The safety assessment consists of radiological dose calculation and nonradiological impacts which is expressed as total number of injuries and fatalities during construction, operation and transportation. The sociopolitical assessment is done in terms of site conditions including easiness for land acquisition, technical feasibility and public acceptance. The economic assessment is performed by cost comparison regarding land acquisition, construction, operation and closure for each alternatives. The evaluation shows that engineered rock cavern disposal method has remarkable favour in safety than others. And also an integrated evaluation using AHP results the engineered rock cavern disposal method as the most favorable option

Reducing conflicts between climate policy and energy policy in the US: The important role of the states

International Nuclear Information System (INIS)

Peterson, Thomas D.; Rose, Adam Z.

2006-01-01

The absence of US national action on global climate change policy has prompted initiatives by the US Congress, cities, states, and regions toward what is likely to become a long-term, collaborative effort to harmonize national energy and climate policies. This upward evolution in the face of a reluctant administration is historically consistent with the development of national legislation on other environmental and social issues in the US. At the heart of this movement is the need to resolve conflicts between high-intensity use of low-cost fossil energy supplies, and the dominating impact of carbon dioxide emissions on global climate change. US states are among the largest carbon dioxide emitters in the world and play a critical role in supplying and transforming energy, as well as consuming it, for economic advantage. State governments are also likely to have to shoulder some of the cost of potentially extensive climate damages and bear the brunt of the cost of implementing future federal mandates. As a result, many are taking proactive stances on the development of climate mitigation policy to prepare for, accelerate, and/or guide national policy. As US states show leadership on addressing greenhouse gas emissions, they also play an important role in forging policies and measures that reduce economic conflict between energy and climate goals. A number have launched or completed greenhouse gas mitigation plans and other major policies in the past few years that address these conflicts through: (1) finding ways to reduce mitigation costs, including the use of incentive-based policy instruments; (2) promoting an open and democratic policy process that includes major stakeholders; (3) promoting equity across socioeconomic groups, regions, and generations; and (4) promoting interregional cooperation. The results are promising and suggest that the state arena for climate and energy policy is evolving quickly and constructively toward alternatives that reduce conflict

The National Shipbuilding Research Program: Producibility Cost Reductions through Alternative Materials and Processes

National Research Council Canada - National Science Library

Horsmon, Jr., Albert W; Johnson, Karl; Gans-Devney, Barbara

1999-01-01

This report describes research into the use of alternative materials and processes to reduce material and labor costs while also looking at the influence of these choices on the life cycle costs of the vessel...

Low cost, high yield IFE reactors: Revisiting Velikhov's vaporizing blankets

International Nuclear Information System (INIS)

Logan, B.G.

1992-01-01

The performance (efficiency and cost) of IFE reactors using MHD conversion is explored for target blanket shells of various materials vaporized and ionized by high fusion yields (5 to 500 GJ). A magnetized, prestressed reactor chamber concept is modeled together with previously developed models for the Compact Fusion Advanced Rankine II (CFARII) MHD Balance-of-Plant (BoP). Using conservative 1-D neutronics models, high fusion yields (20 to 80 GJ) are found necessary to heat Flibe, lithium, and lead-lithium blankets to MHD plasma temperatures, at initial solid thicknesses sufficient to capture most of the fusion yield. Advanced drivers/targets would need to be developed to achieve a ''Bang per Buck'' figure-of-merit approx-gt 20 to 40 joules yield per driver $ for this scheme to be competitive with these blanket materials. Alternatively, more realistic neutronics models and better materials such as lithium hydride may lower the minimum required yields substantially. The very low CFARII BoP costs (contributing only 3 mills/kWehr to CoE) allows this type of reactor, given sufficient advances that non-driver costs dominate, to ultimately produce electricity at a much lower cost than any current nuclear plant

Table sugar as an alternative low cost medium component for in ...

African Journals Online (AJOL)

STORAGESEVER

2008-08-04

Aug 4, 2008 ... In view of this, the aim of this research was to evaluate alternative cheap sources of ... randomized complete block design was used to compare laboratory ..... tuberosum L.) encapsulated in calcium alginate hollow beads.

Costs of berm and causeway alternatives

International Nuclear Information System (INIS)

Kubo, Arthur S.

1987-01-01

Experiments initiated in February 1985 and still in progress have demonstrated that removal of 30 cm of topsoil brings the specific activity of Bikini Island soil down to the level of that on Eneu and reduces the external exposure rate to gamma rays from an average of 68 pr/h to 5 pr/h. The analytical data completed thus far for food crops grown in the experimental and control areas indicate a parallel response. During 1986 results became available showing that removal of topsoil would also limit productivity. However, it is now known that with adequate care the excavated plot can be as productive as the unexcavated (natural) one. The removal of 30 cm (1 foot) of topsoil at Bikini Island would produce large amounts of waste vegetable matter and approximately 719,000 cubic meters of contaminated topsoil. Three principal alternatives have been considered for the disposal of the spoil. The cost estimates for these and other rehabilitation alternatives were developed in detail by a panel of engineers, chaired by BARC member Arthur S. Kubo, which met in January 1986. The panel's report constitutes Appendix C of BARC Report No. 4

Costs of berm and causeway alternatives

Energy Technology Data Exchange (ETDEWEB)

Kubo, Arthur S [Bikini Atoll Rehabilitation Committee, Berkeley, CA (United States); [BDM Corporation, McLean, VA (United States)

1987-07-01

Experiments initiated in February 1985 and still in progress have demonstrated that removal of 30 cm of topsoil brings the specific activity of Bikini Island soil down to the level of that on Eneu and reduces the external exposure rate to gamma rays from an average of 68 pr/h to 5 pr/h. The analytical data completed thus far for food crops grown in the experimental and control areas indicate a parallel response. During 1986 results became available showing that removal of topsoil would also limit productivity. However, it is now known that with adequate care the excavated plot can be as productive as the unexcavated (natural) one. The removal of 30 cm (1 foot) of topsoil at Bikini Island would produce large amounts of waste vegetable matter and approximately 719,000 cubic meters of contaminated topsoil. Three principal alternatives have been considered for the disposal of the spoil. The cost estimates for these and other rehabilitation alternatives were developed in detail by a panel of engineers, chaired by BARC member Arthur S. Kubo, which met in January 1986. The panel's report constitutes Appendix C of BARC Report No. 4.

Cost-Effectiveness of Alternative Blood-Screening Strategies for West Nile Virus in the United States.

Directory of Open Access Journals (Sweden)

2006-01-01

Full Text Available BACKGROUND: West Nile virus (WNV is endemic in the US, varying seasonally and by geographic region. WNV can be transmitted by blood transfusion, and mandatory screening of blood for WNV was recently introduced throughout the US. Guidelines for selecting cost-effective strategies for screening blood for WNV do not exist. METHODS AND FINDINGS: We conducted a cost-effectiveness analysis for screening blood for WNV using a computer-based mathematical model, and using data from prospective studies, retrospective studies, and published literature. For three geographic areas with varying WNV-transmission intensity and length of transmission season, the model was used to estimate lifetime costs, quality-adjusted life expectancy, and incremental cost-effectiveness ratios associated with alternative screening strategies in a target population of blood-transfusion recipients. We compared the status quo (baseline screening using a donor questionnaire to several strategies which differed by nucleic acid testing of either pooled or individual samples, universal versus targeted screening of donations designated for immunocompromised patients, and seasonal versus year-long screening. In low-transmission areas with short WNV seasons, screening by questionnaire alone was the most cost-effective strategy. In areas with high levels of WNV transmission, seasonal screening of individual samples and restricting screening to blood donations designated for immunocompromised recipients was the most cost-effective strategy. Seasonal screening of the entire recipient pool added minimal clinical benefit, with incremental cost-effectiveness ratios exceeding US$1.7 million per quality-adjusted life-year gained. Year-round screening offered no additional benefit compared to seasonal screening in any of the transmission settings. CONCLUSIONS: In areas with high levels of WNV transmission, seasonal screening of individual samples and restricting screening to blood donations

Cost-effectiveness of alternative blood-screening strategies for West Nile Virus in the United States.

Directory of Open Access Journals (Sweden)

Caroline T Korves

2006-02-01

Full Text Available West Nile virus (WNV is endemic in the US, varying seasonally and by geographic region. WNV can be transmitted by blood transfusion, and mandatory screening of blood for WNV was recently introduced throughout the US. Guidelines for selecting cost-effective strategies for screening blood for WNV do not exist.We conducted a cost-effectiveness analysis for screening blood for WNV using a computer-based mathematical model, and using data from prospective studies, retrospective studies, and published literature. For three geographic areas with varying WNV-transmission intensity and length of transmission season, the model was used to estimate lifetime costs, quality-adjusted life expectancy, and incremental cost-effectiveness ratios associated with alternative screening strategies in a target population of blood-transfusion recipients. We compared the status quo (baseline screening using a donor questionnaire to several strategies which differed by nucleic acid testing of either pooled or individual samples, universal versus targeted screening of donations designated for immunocompromised patients, and seasonal versus year-long screening. In low-transmission areas with short WNV seasons, screening by questionnaire alone was the most cost-effective strategy. In areas with high levels of WNV transmission, seasonal screening of individual samples and restricting screening to blood donations designated for immunocompromised recipients was the most cost-effective strategy. Seasonal screening of the entire recipient pool added minimal clinical benefit, with incremental cost-effectiveness ratios exceeding USD 1.7 million per quality-adjusted life-year gained. Year-round screening offered no additional benefit compared to seasonal screening in any of the transmission settings.In areas with high levels of WNV transmission, seasonal screening of individual samples and restricting screening to blood donations designated for immunocompromised recipients is cost

Research and deployment priorities for renewable technologies: Quantifying the importance of various renewable technologies for low cost, high renewable electricity systems in an Australian case study

International Nuclear Information System (INIS)

Riesz, Jenny; Elliston, Ben

2016-01-01

This study aims to identify research priorities to enable low cost, high renewable power systems. An evolutionary program optimises the mix of technologies in 100% renewable energy portfolios (RE) in the Australian National Electricity Market. Various technologies are reduced in availability to determine their relative importance for achieving low costs. The single most important factor is found to be the integration of large quantities of wind; therefore wind integration is identified as a research priority. In contrast, photovoltaics are found to “saturate” the system at less than 10% of total energy (in the absence of storage or demand management, installation of further photovoltaics does not contribute significant further value). This indicates that policies to promote utility-scale photovoltaics should be considered in partnership with complementary measures (such as demand side participation and storage). Biofuelled gas turbines are found to be important; a complete absence of bioenergy increases costs by AU$20–30/MWh, and even having only 0.1 TWh per year of bioenergy available reduces average costs by AU$3–4/MWh. Limits on the non-synchronous penetration (NSP) are found to be relatively expensive, suggesting a significant research priority around finding alternative approaches to providing synchronous services, such as inertia. Geothermal and concentrating solar thermal technologies do not appear essential as long as sufficient wind and peaking bioenergy is available. - Highlights: • Photovoltaics saturate early, suggesting they need complementary measures. • Biofuelled gas turbines or another peaking technology are important for low costs. • Limits on the non-synchronous penetration are relatively expensive.

Pilot testing of environment-friendly low-emission alternative drive components for city buses. Phase 1. Technical final report

International Nuclear Information System (INIS)

Doemeland, H.; Haase, G.; Sarnes, J.; Schultheis, S.; Schuenemann, M.; Strauss, A.; Voss, K.; Aepler, E.; Stachel, K.; Wolter, M.; Lenz, W.

1993-05-01

The report describes pilot tests of environment-friendly, low-emission city buses with alternative drive systems. The following problems are discussed: Natural gas as primary energy source, natural gas drives, safety requirements, measurement and testing technology for natural gas engines, environmental effects, operating concepts, operating cost. (HW) [de

Student peer teaching in paediatric simulation training is a feasible low-cost alternative for education.

Science.gov (United States)

Wagner, Michael; Mileder, Lukas P; Goeral, Katharina; Klebermass-Schrehof, Katrin; Cardona, Francesco S; Berger, Angelika; Schmölzer, Georg M; Olischar, Monika

2017-06-01

The World Health Organization recommends regular simulation training to prevent adverse healthcare events. We used specially trained medical students to provide paediatric simulation training to their peers and assessed feasibility, cost and confidence of students who attended the courses. Students at the Medical University of Vienna, Austria were eligible to participate. Students attended two high-fidelity simulation training sessions, delivered by peers, which were videorecorded for evaluation. The attendees then completed questionnaires before and after the training. Associated costs and potential benefits were analysed. From May 2013 to June 2015, 152 students attended the sessions and 57 (37.5%) completed both questionnaires. Satisfaction was high, with 95% stating their peer tutor was competent and 90% saying that peer tutors were well prepared. The attendees' confidence in treating critically ill children significantly improved after training (p peer tutor were six Euros per working hour, compared to 35 Euros for a physician. Using peer tutors for paediatric simulation training was a feasible and low-cost option that increased the number of medical students who could be trained and increased the self-confidence of the attendees. Satisfaction with the peer tutors was high. ©2017 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

Optimal replacement policy of products with repair-cost threshold after the extended warranty

Institute of Scientific and Technical Information of China (English)

Lijun Shang; Zhiqiang Cai

2017-01-01

The reliability of the product sold under a warranty is usually maintained by the manufacturer during the warranty period. After the expiry of the warranty, however, the consumer confronts a problem about how to maintain the reliability of the product. This paper proposes, from the consumer's perspective, a replace-ment policy after the extended warranty, under the assumption that the product is sold under the renewable free replacement warranty (RFRW) policy in which the replacement is dependent on the repair-cost threshold. The proposed replacement policy is the replacement after the extended warranty is performed by the consumer based on the repair-cost threshold or preventive replacement (PR) age, which are decision variables. The expected cost rate model is derived from the consumer's perspective. The existence and uniqueness of the optimal solution that minimizes the expected cost rate per unit time are offered. Finally, a numeri-cal example is presented to exemplify the proposed model.

Planar junctionless phototransistor: A potential high-performance and low-cost device for optical-communications

Science.gov (United States)

Ferhati, H.; Djeffal, F.

2017-12-01

In this paper, a new junctionless optical controlled field effect transistor (JL-OCFET) and its comprehensive theoretical model is proposed to achieve high optical performance and low cost fabrication process. Exhaustive study of the device characteristics and comparison between the proposed junctionless design and the conventional inversion mode structure (IM-OCFET) for similar dimensions are performed. Our investigation reveals that the proposed design exhibits an outstanding capability to be an alternative to the IM-OCFET due to the high performance and the weak signal detection benefit offered by this design. Moreover, the developed analytical expressions are exploited to formulate the objective functions to optimize the device performance using Genetic Algorithms (GAs) approach. The optimized JL-OCFET not only demonstrates good performance in terms of derived drain current and responsivity, but also exhibits superior signal to noise ratio, low power consumption, high-sensitivity, high ION/IOFF ratio and high-detectivity as compared to the conventional IM-OCFET counterpart. These characteristics make the optimized JL-OCFET potentially suitable for developing low cost and ultrasensitive photodetectors for high-performance and low cost inter-chips data communication applications.

Indirect land use change and biofuel policy

International Nuclear Information System (INIS)

Kocoloski, Matthew; Griffin, W Michael; Matthews, H Scott

2009-01-01

Biofuel debates often focus heavily on carbon emissions, with parties arguing for (or against) biofuels solely on the basis of whether the greenhouse gas emissions of biofuels are less than (or greater than) those of gasoline. Recent studies argue that land use change leads to significant greenhouse gas emissions, making some biofuels more carbon intensive than gasoline. We argue that evaluating the suitability and utility of biofuels or any alternative energy source within the limited framework of plus and minus carbon emissions is too narrow an approach. Biofuels have numerous impacts, and policy makers should seek compromises rather than relying solely on carbon emissions to determine policy. Here, we estimate that cellulosic ethanol, despite having potentially higher life cycle CO 2 emissions (including from land use) than gasoline, would still be cost-effective at a CO 2 price of $80 per ton or less, well above estimated CO 2 mitigation costs for many alternatives. As an example of the broader approach to biofuel policy, we suggest the possibility of using the potential cost reductions of cellulosic ethanol relative to gasoline to balance out additional carbon emissions resulting from indirect land use change as an example of ways in which policies could be used to arrive at workable solutions.

Indirect land use change and biofuel policy

Science.gov (United States)

Kocoloski, Matthew; Griffin, W. Michael; Matthews, H. Scott

2009-09-01

Biofuel debates often focus heavily on carbon emissions, with parties arguing for (or against) biofuels solely on the basis of whether the greenhouse gas emissions of biofuels are less than (or greater than) those of gasoline. Recent studies argue that land use change leads to significant greenhouse gas emissions, making some biofuels more carbon intensive than gasoline. We argue that evaluating the suitability and utility of biofuels or any alternative energy source within the limited framework of plus and minus carbon emissions is too narrow an approach. Biofuels have numerous impacts, and policy makers should seek compromises rather than relying solely on carbon emissions to determine policy. Here, we estimate that cellulosic ethanol, despite having potentially higher life cycle CO2 emissions (including from land use) than gasoline, would still be cost-effective at a CO2 price of 80 per ton or less, well above estimated CO2 mitigation costs for many alternatives. As an example of the broader approach to biofuel policy, we suggest the possibility of using the potential cost reductions of cellulosic ethanol relative to gasoline to balance out additional carbon emissions resulting from indirect land use change as an example of ways in which policies could be used to arrive at workable solutions.

Cost effectiveness of medical devices to diagnose pre-eclampsia in low-resource settings

Directory of Open Access Journals (Sweden)

Zoë M. McLaren

Full Text Available Background: Maternal mortality remains a major health challenge facing developing countries, with pre-eclampsia accounting for up to 17% of maternal deaths. Diagnosis requires skilled health providers and devices that are appropriate for low-resource settings. This study presents the first cost-effectiveness analysis of multiple medical devices used to diagnose pre-eclampsia in low- and middle-income countries (LMICs. Methods: Blood pressure and proteinuria measurement devices, identified from compendia for LMICs, were included. We developed a decision tree framework to assess the cost-effectiveness of each device using parameter values that reflect the general standard of care based on a survey of relevant literature and expert opinion. We examined the sensitivity of our results using one-way and second-order probabilistic multivariate analyses. Results: Because the disability-adjusted life years (DALYs averted for each device were very similar, the results were influenced by the per-use cost ranking. The most cost-effective device combination was a semi-automatic blood pressure measurement device and visually read urine strip test with the lowest combined per-use cost of $0.2004 and an incremental cost effectiveness ratio of $93.6 per DALY gained relative to a baseline with no access to diagnostic devices. When access to treatment is limited, it is more cost-effective to improve access to treatment than to increase testing rates or diagnostic device sensitivity. Conclusions: Our findings were not sensitive to changes in device sensitivity, however they were sensitive to changes in the testing rate and treatment rate. Furthermore, our results suggest that simple devices are more cost-effective than complex devices. The results underscore the desirability of two design features for LMICs: ease of use and accuracy without calibration. Our findings have important implications for policy makers, health economists, health care providers and

Strategies to fight low-cost rivals.

Science.gov (United States)

Kumar, Nirmalya

2006-12-01

Companies find it challenging and yet strangely reassuring to take on opponents whose strategies, strengths, and weaknesses resemble their own. Their obsession with familiar rivals, however, has blinded them to threats from disruptive, low-cost competitors. Successful price warriors, such as the German retailer Aldi, are changing the nature of competition by employing several tactics: focusing on just one or a few consumer segments, delivering the basic product or providing one benefit better than rivals do, and backing low prices with superefficient operations. Ignoring cutprice rivals is a mistake because they eventually force companies to vacate entire market segments. Price wars are not the answer, either: Slashing prices usually lowers profits for incumbents without driving the low-cost entrants out of business. Companies take various approaches to competing against cut-price players. Some differentiate their products--a strategy that works only in certain circumstances. Others launch low-cost businesses of their own, as many airlines did in the 1990s--a so-called dual strategy that succeeds only if companies can generate synergies between the existing businesses and the new ventures, as the financial service providers HSBC and ING did. Without synergies, corporations are better off trying to transform themselves into low-cost players, a difficult feat that Ryanair accomplished in the 1990s, or into solution providers. There will always be room for both low-cost and value-added players. How much room each will have depends not only on the industry and customers' preferences, but also on the strategies traditional businesses deploy.

low-cost apparatus from locally available materials for teaching

African Journals Online (AJOL)

unesco

twofold: i) to design and produce appropriate low cost apparatus from locally .... How are the low-cost and manufactured apparatus compared in terms of cost and efficiency? ... BASIC TOOLS FOR THE LOW COST APPARATUS PRODUCTION.

Costs and returns analysis of improved and alternative cassava ...

African Journals Online (AJOL)

The specific objectives of the study was an analysis of the costs and returns of improved and alternative technologies available in the study area by farmers and their level of adoption of the new technologies. Data were collected from a random sample of 250 farmers and 30 extension Staff in the three (3) agricultural zones ...

Licensing of alternative methods of disposal of low-level radioactive waste: Branch technical position, Low-Level Waste Licensing Branch

International Nuclear Information System (INIS)

Higginbotham, L.B.; Dragonette, K.S.; Pittiglio, C.L. Jr.

1986-12-01

This branch technical position statement identifies and describes specific methods of disposal currently being considered as alternatives to shallow land burial, provides general guidance on these methods of disposal, and recommends procedures that will improve and simplify the licensing process. The statement provides answers to certain questions that have arisen regarding the applicability of 10 CFR 61 to near-surface disposal of waste, using methods that incorporate engineered barriers or structures, and other alternatives to conventional shallow land burial disposal practices. This position also identifies a recently published NRC contractor report that addresses the applicability of 10 CFR 61 to a range of generic disposal concepts and which provides technical guidance that the staff intends to use for these concepts. This position statement combined with the above-mentioned NRC contractor report fulfills the requirements of Section 8(a) of Public Law 99-240, the Low-Level Radioactive Waste Policy Amendments Act of 1985

What do we know about climate policy costs and how can we learn more?

International Nuclear Information System (INIS)

Dowlatabadi, H.

2003-01-01

How much a policy is expected to cost and who will be bearing the brunt of it play a significant role in the debates that shape regulations. We do not have a good track record of predicting costs, but a systematic review of past assessments has identified the factors that lead to errors. A wide range of expected costs of climate policy have been hotly debated, but all are likely to be wrong. This does not mean that we should continue a debate using ill informed analyses. On the contrary, we need early small experiments to shed light on key unknowns. Climate policy is a long-term challenge and an adaptive regulatory approach promises to inform policy targets and improve GHG controls by through sequential regulatory phases that promote: innovation, flexibility and diffusion of best technologies

Estimating the Cost of Neurosurgical Procedures in a Low-Income Setting: An Observational Economic Analysis.

Science.gov (United States)

Abdelgadir, Jihad; Tran, Tu; Muhindo, Alex; Obiga, Doomwin; Mukasa, John; Ssenyonjo, Hussein; Muhumza, Michael; Kiryabwire, Joel; Haglund, Michael M; Sloan, Frank A

2017-05-01

There are no data on cost of neurosurgery in low-income and middle-income countries. The objective of this study was to estimate the cost of neurosurgical procedures in a low-resource setting to better inform resource allocation and health sector planning. In this observational economic analysis, microcosting was used to estimate the direct and indirect costs of neurosurgical procedures at Mulago National Referral Hospital (Kampala, Uganda). During the study period, October 2014 to September 2015, 1440 charts were reviewed. Of these patients, 434 had surgery, whereas the other 1006 were treated nonsurgically. Thirteen types of procedures were performed at the hospital. The estimated mean cost of a neurosurgical procedure was $542.14 (standard deviation [SD], $253.62). The mean cost of different procedures ranged from $291 (SD, $101) for burr hole evacuations to $1,221 (SD, $473) for excision of brain tumors. For most surgeries, overhead costs represented the largest proportion of the total cost (29%-41%). This is the first study using primary data to determine the cost of neurosurgery in a low-resource setting. Operating theater capacity is likely the binding constraint on operative volume, and thus, investing in operating theaters should achieve a higher level of efficiency. Findings from this study could be used by stakeholders and policy makers for resource allocation and to perform economic analyses to establish the value of neurosurgery in achieving global health goals. Copyright © 2017 Elsevier Inc. All rights reserved.

Evolution of competition in energy alternative pathway and the influence of energy policy on economic growth

International Nuclear Information System (INIS)

Yang, Honglin; Wang, Lin; Tian, Lixin

2015-01-01

This work is devoted to the evolution of the competition of energy alternative pathway in China, and the influence of energy policy on economic growth by using a dynamical system method. Firstly, the relation between energy and economic growth is taken into account, and a dynamic evolution model is established. It is observed that Hopf bifurcation and chaotic behavior occurs with the varying investment in renewable energy production. Secondly, when there is no policy intervention in energy market, the evolution of competition in energy alternative pathway is also investigated. Thirdly, the system parameters are also identified by using an artificial neural network method on the basis of certain empirical statistical data in China, and the dynamics of the parameters-identified system are studied. Finally, the influences of energy policy on economic growth are empirically analyzed, and some policy recommendations are given based on the results of empirical analysis. - Highlights: • Modeling the energy economy system via the method of dynamic system. • Attaining the chaotic attractor of the energy production and economic system. • Discovering the Hopf bifurcation when the investment changes. • Proposing the alternative pathway of free competition in energy production. • Determining the turning points of parameters related to policy regulation

Open source software and low cost sensors for teaching UAV science

Science.gov (United States)

Kefauver, S. C.; Sanchez-Bragado, R.; El-Haddad, G.; Araus, J. L.

2016-12-01

Drones, also known as UASs (unmanned aerial systems), UAVs (Unmanned Aerial Vehicles) or RPAS (Remotely piloted aircraft systems), are both useful advanced scientific platforms and recreational toys that are appealing to younger generations. As such, they can make for excellent education tools as well as low-cost scientific research project alternatives. However, the process of taking pretty pictures to remote sensing science can be daunting if one is presented with only expensive software and sensor options. There are a number of open-source tools and low cost platform and sensor options available that can provide excellent scientific research results, and, by often requiring more user-involvement than commercial software and sensors, provide even greater educational benefits. Scale-invariant feature transform (SIFT) algorithm implementations, such as the Microsoft Image Composite Editor (ICE), which can create quality 2D image mosaics with some motion and terrain adjustments and VisualSFM (Structure from Motion), which can provide full image mosaicking with movement and orthorectification capacities. RGB image quantification using alternate color space transforms, such as the BreedPix indices, can be calculated via plugins in the open-source software Fiji (http://fiji.sc/Fiji; http://github.com/george-haddad/CIMMYT). Recent analyses of aerial images from UAVs over different vegetation types and environments have shown RGB metrics can outperform more costly commercial sensors. Specifically, Hue-based pixel counts, the Triangle Greenness Index (TGI), and the Normalized Green Red Difference Index (NGRDI) consistently outperformed NDVI in estimating abiotic and biotic stress impacts on crop health. Also, simple kits are available for NDVI camera conversions. Furthermore, suggestions for multivariate analyses of the different RGB indices in the "R program for statistical computing", such as classification and regression trees can allow for a more approachable

Final Technical Report Power through Policy: "Best Practices" for Cost-Effective Distributed Wind

Energy Technology Data Exchange (ETDEWEB)

Rhoads-Weaver, Heather; Gagne, Matthew; Sahl, Kurt; Orrell, Alice; Banks, Jennifer

2012-02-28

Power through Policy: 'Best Practices' for Cost-Effective Distributed Wind is a U.S. Department of Energy (DOE)-funded project to identify distributed wind technology policy best practices and to help policymakers, utilities, advocates, and consumers examine their effectiveness using a pro forma model. Incorporating a customized feed from the Database of State Incentives for Renewables and Efficiency (DSIRE), the Web-based Distributed Wind Policy Comparison Tool (Policy Tool) is designed to assist state, local, and utility officials in understanding the financial impacts of different policy options to help reduce the cost of distributed wind technologies. The project's final products include the Distributed Wind Policy Comparison Tool, found at www.windpolicytool.org, and its accompanying documentation: Distributed Wind Policy Comparison Tool Guidebook: User Instructions, Assumptions, and Case Studies. With only two initial user inputs required, the Policy Tool allows users to adjust and test a wide range of policy-related variables through a user-friendly dashboard interface with slider bars. The Policy Tool is populated with a variety of financial variables, including turbine costs, electricity rates, policies, and financial incentives; economic variables including discount and escalation rates; as well as technical variables that impact electricity production, such as turbine power curves and wind speed. The Policy Tool allows users to change many of the variables, including the policies, to gauge the expected impacts that various policy combinations could have on the cost of energy (COE), net present value (NPV), internal rate of return (IRR), and the simple payback of distributed wind projects ranging in size from 2.4 kilowatts (kW) to 100 kW. The project conducted case studies to demonstrate how the Policy Tool can provide insights into 'what if' scenarios and also allow the current status of incentives to be examined or defended when

Tracking costs of alternatively fueled buses in Florida - phase II.

Science.gov (United States)

2013-04-01

The goal of this project is to continue collecting and reporting the data on the performance and costs of alternatively fueled public transit vehicles in the state in a consistent manner in order to keep the Bus Fuels Fleet Evaluation Tool (BuFFeT) c...

Life Cycle Costing in Sustainability Assessment—A Case Study of Remanufactured Alternators

Directory of Open Access Journals (Sweden)

Annekatrin Lehmann

2011-11-01

Full Text Available Sustainability is on the international agenda, and is a driver for industry in international competition. Sustainability encompasses the three pillars: environment, society and economy. To prevent shifting of burden, the whole life cycle needs to be taken into account. For the environmental dimension of sustainability, life cycle assessment (LCA has been practiced for a while and is a standardized method. A life cycle approach for the social and economic pillars of sustainability needs to be further developed. This paper investigates the application of life cycle costing (LCC as part of a wider sustainability assessment where also social life cycle assessment (SLCA and LCA are combined. LCA-type LCC is applied on a case study of remanufactured alternators. Remanufacturing of automobile parts is a fast growing important business with large potential for cost and resource savings. Three design alternatives for the alternator and three locations for the remanufacturing plant are evaluated. The remanufacturer perspective and the user perspective are investigated. The results for the LCA-type LCC show that the largest cost for the remanufacturer is the new parts replacing old warn parts. However, the user cost, and therein especially, cost for fuel used for the alternator’s power production dominates and should be the focus for further improvement. In conducting the case study, it was revealed that the connection between the LCA-type LCC results and the economic dimension of sustainability needs to be further investigated and defined. For this purpose, areas of protection for life cycle sustainability assessment and LCA-type LCC in particular need further development.

Major alternatives for government policies, organizational structures, and actions in civilian nuclear reactor emergency management in the United States

International Nuclear Information System (INIS)

1980-01-01

The purpose of this report is to identify and assess major alternatives for governmental policies, organizational structures, and actions in civilian nuclear reactor emergency management in the United States. The National Academy of Public Administration agreed to identify and evaluate alternatives for governmental policies, organizational structures, and actions in civilian nuclear reactor emergency management. It agreed to review present policies and practices in civilian nuclear reactor emergency management, to review selected experiences and practices of governmental agencies other than the Nuclear Regulatory Commission, and industries other than the nuclear power industry, and to identify alternatives to the present nuclear emergency system

Economic analysis of alternative LLW disposal methods

International Nuclear Information System (INIS)

Foutes, C.E.

1987-01-01

The Environmental Protection Agency (EPA) has evaluated the costs and benefits of alternative disposal technologies as part of its program to develop generally applicable environmental standards for the land disposal of low-level radioactive waste (LLW). Costs, population health effects and Critical Population Group (CPG) exposures resulting from alternative waste treatment and disposal methods were developed and input into the analysis. The cost-effectiveness analysis took into account a number of waste streams, hydrogeologic and climatic region settings, and waste treatment and disposal methods. Total costs of each level of a standard included costs for packaging, processing, transportation, and burial of waste. Benefits are defined in terms of reductions in the general population health risk (expected fatal cancers and genetic effects) evaluated over 10,000 years. A cost-effectiveness ratio, was calculated for each alternative standard. This paper describes the alternatives considered and preliminary results of the cost-effectiveness analysis

Cost-Effectiveness of the Freeze-All Policy.

Science.gov (United States)

Roque, Matheus; Valle, Marcello; Guimarães, Fernando; Sampaio, Marcos; Geber, Selmo

2015-08-01

To evaluate the cost-effectiveness of freeze-all cycles when compared to fresh embryo transfer. This was an observational study with a cost-effectiveness analysis. The analysis consisted of 530 intracytoplasmic sperm injection (ICSI) cycles in a private center in Brazil between January 2012 and December 2013. A total of 530 intracytoplasmic sperm injection (ICSI) cycles - 351 fresh embryo transfers and 179 freeze-all cycles - with a gonadotropin-releasing hormone (GnRH) antagonist protocol and day 3 embryo transfers. The pregnancy rate was 31.1% in the fresh group and 39.7% in the freeze-all group. We performed two scenario analyses for costs. In scenario 1, we included those costs associated with the ICSI cycle (monitoring during controlled ovarian stimulation [COS], oocyte retrieval, embryo transfer, IVF laboratory, and medical costs), embryo cryopreservation of supernumerary embryos, hormone measurements during COS and endometrial priming, medication use (during COS, endometrial priming, and luteal phase support), ultrasound scan for frozen- thawed embryo transfer (FET), obstetric ultrasounds, and miscarriage. The total cost (in USD) per pregnancy was statistically lower in the freeze-all cycles (19,156.73 ± 1,732.99) when compared to the fresh cycles (23,059.72 ± 2,347.02). Even in Scenario 2, when charging all of the patients in the freeze-all group for cryopreservation (regardless of supernumerary embryos) and for FET, the fresh cycles had a statistically significant increase in treatment costs per ongoing pregnancy. The results presented in this study suggest that the freeze-all policy is a cost-effective strategy when compared to fresh embryo transfer.

A Primer for Telemetry Interfacing in Accordance with NASA Standards Using Low Cost FPGAs

Science.gov (United States)

McCoy, Jake; Schultz, Ted; Tutt, James; Rogers, Thomas; Miles, Drew; McEntaffer, Randall

2016-03-01

Photon counting detector systems on sounding rocket payloads often require interfacing asynchronous outputs with a synchronously clocked telemetry (TM) stream. Though this can be handled with an on-board computer, there are several low cost alternatives including custom hardware, microcontrollers and field-programmable gate arrays (FPGAs). This paper outlines how a TM interface (TMIF) for detectors on a sounding rocket with asynchronous parallel digital output can be implemented using low cost FPGAs and minimal custom hardware. Low power consumption and high speed FPGAs are available as commercial off-the-shelf (COTS) products and can be used to develop the main component of the TMIF. Then, only a small amount of additional hardware is required for signal buffering and level translating. This paper also discusses how this system can be tested with a simulated TM chain in the small laboratory setting using FPGAs and COTS specialized data acquisition products.

Maintaining environmental quality while expanding biomass production: Sub-regional U.S. policy simulations

International Nuclear Information System (INIS)

Egbendewe-Mondzozo, Aklesso; Swinton, Scott M.; Izaurralde, R. César; Manowitz, David H.; Zhang, Xuesong

2013-01-01

This paper evaluates environmental policy effects on ligno-cellulosic biomass production and environmental outcomes using an integrated bioeconomic optimization model. The environmental policy integrated climate (EPIC) model is used to simulate crop yields and environmental indicators in current and future potential bioenergy cropping systems based on weather, topographic and soil data. The crop yield and environmental outcome parameters from EPIC are combined with biomass transport costs and economic parameters in a representative farmer profit-maximizing mathematical optimization model. The model is used to predict the impact of alternative policies on biomass production and environmental outcomes. We find that without environmental policy, rising biomass prices initially trigger production of annual crop residues, resulting in increased greenhouse gas emissions, soil erosion, and nutrient losses to surface and ground water. At higher biomass prices, perennial bioenergy crops replace annual crop residues as biomass sources, resulting in lower environmental impacts. Simulations of three environmental policies namely a carbon price, a no-till area subsidy, and a fertilizer tax reveal that only the carbon price policy systematically mitigates environmental impacts. The fertilizer tax is ineffectual and too costly to farmers. The no-till subsidy is effective only at low biomass prices and is too costly to government. - Highlights: ► Bioeconomic optimization model predicts how biomass production affects environment. ► Rising biomass production could impair climate and water quality. ► Environmental protection policies compared as biomass supply grows. ► Carbon price protects the environment cost-effectively as biomass supply expands

Low Cost Benefit Suggestions.

Science.gov (United States)

Doyel, Hoyt W.; McMillan, John D.

1980-01-01

Outlines eight low-cost employee benefits and summarizes their relative advantages. The eight include a stock ownership program, a sick leave pool, flexible working hours, production incentives, and group purchase plans. (IRT)

Low Cost Carbon Fiber From Renewable Resources

International Nuclear Information System (INIS)

Compere, A.L.

2001-01-01

The Department of Energy Partnership for a New Generation of Vehicles has shown that, by lowering overall weight, the use of carbon fiber composites could dramatically decrease domestic vehicle fuel consumption. For the automotive industry to benefit from carbon fiber technology, fiber production will need to be substantially increased and fiber price decreased to$7/kg. To achieve this cost objective, alternate precursors to pitch and polyacrylonitrile (PAN) are being investigated as possible carbon fiber feedstocks. Additionally, sufficient fiber to provide 10 to 100 kg for each of the 13 million cars and light trucks produced annually in the U.S. will require an increase of 5 to 50-fold in worldwide carbon fiber production. High-volume, renewable or recycled materials, including lignin, cellulosic fibers, routinely recycled petrochemical fibers, and blends of these components, appear attractive because the cost of these materials is inherently both low and insensitive to changes in petroleum price. Current studies have shown that a number of recycled and renewable polymers can be incorporated into melt-spun fibers attractive as carbon fiber feedstocks. Highly extrudable lignin blends have attractive yields and can be readily carbonized and graphitized. Examination of the physical structure and properties of carbonized and graphitized fibers indicates the feasibility of use in transportation composite applications

Tobacco litter costs and public policy: a framework and methodology for considering the use of fees to offset abatement costs.

Science.gov (United States)

Schneider, John E; Peterson, N Andrew; Kiss, Noemi; Ebeid, Omar; Doyle, Alexis S

2011-05-01

Growing concern over the costs, environmental impact and safety of tobacco product litter (TPL) has prompted states and cities to undertake a variety of policy initiatives, of which litter abatement fees are part. The present work describes a framework and methodology for calculating TPL costs and abatement fees. Abatement is associated with four categories of costs: (1) mechanical and manual abatement from streets, sidewalks and public places, (2) mechanical and manual abatement from storm water and sewer treatment systems, (3) the costs associated with harm to the ecosystem and harm to industries dependent on clean and healthy ecosystems, and (4) the costs associated with direct harm to human health. The experiences of the City of San Francisco's recently proposed tobacco litter abatement fee serve as a case study. City and municipal TPL costs are incurred through manual and mechanical clean-up of surfaces and catchment areas. According to some studies, public litter abatement costs to US cities range from US$3 million to US$16 million. TPL typically comprises between 22% and 36% of all visible litter, implying that total public TPL direct abatement costs range from about US$0.5 million to US$6 million for a city the size of San Francisco. The costs of mitigating the negative externalities of TPL in a city the size of San Francisco can be offset by implementing a fee of approximately US$0.20 per pack. Tobacco litter abatement costs to cities can be substantial, even when the costs of potential environmental pollution and tourism effects are excluded. One public policy option to address tobacco litter is levying of fees on cigarettes sold. The methodology described here for calculating TPL costs and abatement fees may be useful to state and local authorities who are considering adoption of this policy initiative.

An environmental cost-benefit analysis of alternative green roofing strategies

Science.gov (United States)

Richardson, M.; William, R. K.; Goodwell, A. E.; Le, P. V.; Kumar, P.; Stillwell, A. S.

2016-12-01

Green roofs and cool roofs are alternative roofing strategies that mitigate urban heat island effects and improve building energy performance. Green roofs consist of soil and vegetation layers that provide runoff reduction, thermal insulation, and potential natural habitat, but can require regular maintenance. Cool roofs involve a reflective layer that reflects more sunlight than traditional roofing materials, but require additional insulation during winter months. This study evaluates several roofing strategies in terms of energy performance, urban heat island mitigation, water consumption, and economic cost. We use MLCan, a multi-layer canopy model, to simulate irrigated and non-irrigated green roof cases with shallow and deep soil depths during the spring and early summer of 2012, a drought period in central Illinois. Due to the dry conditions studied, periodic irrigation is implemented in the model to evaluate its effect on evapotranspiration. We simulate traditional and cool roof scenarios by altering surface albedo and omitting vegetation and soil layers. We find that both green roofs and cool roofs significantly reduce surface temperature compared to the traditional roof simulation. Cool roof temperatures always remain below air temperature and, similar to traditional roofs, require low maintenance. Green roofs remain close to air temperature and also provide thermal insulation, runoff reduction, and carbon uptake, but might require irrigation during dry periods. Due to the longer lifetime of a green roof compared to cool and traditional roofs, we find that green roofs realize the highest long term cost savings under simulated conditions. However, using longer-life traditional roof materials (which have a higher upfront cost) can help decrease this price differential, making cool roofs the most affordable option due to the higher maintenance costs associated with green roofs

Optimum equipment maintenance/replacement policy. Part 2: Markov decision approach

Science.gov (United States)

Charng, T.

1982-01-01

Dynamic programming was utilized as an alternative optimization technique to determine an optimal policy over a given time period. According to a joint effect of the probabilistic transition of states and the sequence of decision making, the optimal policy is sought such that a set of decisions optimizes the long-run expected average cost (or profit) per unit time. Provision of an alternative measure for the expected long-run total discounted costs is also considered. A computer program based on the concept of the Markov Decision Process was developed and tested. The program code listing, the statement of a sample problem, and the computed results are presented.

Alternative energy sources

International Nuclear Information System (INIS)

Chapman, P.

1978-01-01

It is suggested that the development of alternative energy sources has made them more attractive than nuclear power, due to their characteristics, such as small scale and short lead times, moderate costs and minimal environmental impact. The objectives of energy policy are discussed in relation to forecasts of energy demand. Tables show (a) projected useful energy demands UK; (b) patterns of end-use of energy; (c) costs of heating fuels; (d) net present value of gas purchases; (e) useful-energy by end-use analysis; and (f) primary fuel summary 2025. The contributions of hydro, nuclear, waves, solar, oil, gas and coal are estimated to 2025. (U.K.)

Environmental tipping points significantly affect the cost-benefit assessment of climate policies.

Science.gov (United States)

Cai, Yongyang; Judd, Kenneth L; Lenton, Timothy M; Lontzek, Thomas S; Narita, Daiju

2015-04-14

Most current cost-benefit analyses of climate change policies suggest an optimal global climate policy that is significantly less stringent than the level required to meet the internationally agreed 2 °C target. This is partly because the sum of estimated economic damage of climate change across various sectors, such as energy use and changes in agricultural production, results in only a small economic loss or even a small economic gain in the gross world product under predicted levels of climate change. However, those cost-benefit analyses rarely take account of environmental tipping points leading to abrupt and irreversible impacts on market and nonmarket goods and services, including those provided by the climate and by ecosystems. Here we show that including environmental tipping point impacts in a stochastic dynamic integrated assessment model profoundly alters cost-benefit assessment of global climate policy. The risk of a tipping point, even if it only has nonmarket impacts, could substantially increase the present optimal carbon tax. For example, a risk of only 5% loss in nonmarket goods that occurs with a 5% annual probability at 4 °C increase of the global surface temperature causes an immediate two-thirds increase in optimal carbon tax. If the tipping point also has a 5% impact on market goods, the optimal carbon tax increases by more than a factor of 3. Hence existing cost-benefit assessments of global climate policy may be significantly underestimating the needs for controlling climate change.

Low Cost, Low Power, High Sensitivity Magnetometer

Science.gov (United States)

2008-12-01

which are used to measure the small magnetic signals from brain. Other types of vector magnetometers are fluxgate , coil based, and magnetoresistance...concentrator with the magnetometer currently used in Army multimodal sensor systems, the Brown fluxgate . One sees the MEMS fluxgate magnetometer is...Guedes, A.; et al., 2008: Hybrid - LOW COST, LOW POWER, HIGH SENSITIVITY MAGNETOMETER A.S. Edelstein*, James E. Burnette, Greg A. Fischer, M.G

Seasonal influenza vaccination for children in Thailand: a cost-effectiveness analysis.

Science.gov (United States)

Meeyai, Aronrag; Praditsitthikorn, Naiyana; Kotirum, Surachai; Kulpeng, Wantanee; Putthasri, Weerasak; Cooper, Ben S; Teerawattananon, Yot

2015-05-01

Seasonal influenza is a major cause of mortality worldwide. Routine immunization of children has the potential to reduce this mortality through both direct and indirect protection, but has not been adopted by any low- or middle-income countries. We developed a framework to evaluate the cost-effectiveness of influenza vaccination policies in developing countries and used it to consider annual vaccination of school- and preschool-aged children with either trivalent inactivated influenza vaccine (TIV) or trivalent live-attenuated influenza vaccine (LAIV) in Thailand. We also compared these approaches with a policy of expanding TIV coverage in the elderly. We developed an age-structured model to evaluate the cost-effectiveness of eight vaccination policies parameterized using country-level data from Thailand. For policies using LAIV, we considered five different age groups of children to vaccinate. We adopted a Bayesian evidence-synthesis framework, expressing uncertainty in parameters through probability distributions derived by fitting the model to prospectively collected laboratory-confirmed influenza data from 2005-2009, by meta-analysis of clinical trial data, and by using prior probability distributions derived from literature review and elicitation of expert opinion. We performed sensitivity analyses using alternative assumptions about prior immunity, contact patterns between age groups, the proportion of infections that are symptomatic, cost per unit vaccine, and vaccine effectiveness. Vaccination of children with LAIV was found to be highly cost-effective, with incremental cost-effectiveness ratios between about 2,000 and 5,000 international dollars per disability-adjusted life year averted, and was consistently preferred to TIV-based policies. These findings were robust to extensive sensitivity analyses. The optimal age group to vaccinate with LAIV, however, was sensitive both to the willingness to pay for health benefits and to assumptions about contact

Essays on alternative energy policies affecting the US transportation sector

Science.gov (United States)

O'Rear, Eric G.

This dissertation encompasses three essays evaluating the impacts of different policies targeting the greenhouse gas (GHG) emissions, fuel demands, etc. of the transportation sector. Though there are some similarities across the three chapters, each essay stands alone as an independent work. The 2010 US EPA MARKAL model is used in each essay to evaluate policy effects. Essay 1 focuses on the recent increases in Corporate Average Fuel Economy (CAFE) standards, and the implications of a "rebound effect." These increases are compared to a carbon tax generating similar reductions in system-wide emissions. As anticipated, the largest reductions in fuel use by light-duty vehicles (LDV) and emissions are achieved under CAFE. Consideration of the rebound effect does little to distort CAFE benefits. Our work validates many economists' belief that a carbon tax is a more efficient approach. However, because the tax takes advantage of cheaper abatement opportunities in other sectors, reductions in transportation emissions will be much lower than what we observe with CAFE. Essay 2 compares CAFE increases with what some economists suggest would be a much more "efficient" alternative -- a system-wide oil tax internalizing some environmental externalities. Because oil taxes are likely to be implemented in addition to CAFE standards, we consider a combined policy case reflecting this. Our supplementary analysis approximates the appropriate tax rates to produce similar reductions in oil demands as CAFE (CAFE-equivalent tax rates). We discover that taxes result in greater and more cost-effective reductions in system-wide emissions and net oil imports than CAFE. The current fuel tax system is compared to three versions of a national vehicle miles traveled (VMT) tax charged to all LDVs in Essay 3. VMT taxes directly charge motorists for each mile driven and help to correct the problem of eroding tax revenues given the failure of today's fuel taxes to adjust with inflation. Results

Federal policies for renewable electricity: Impacts and interactions

International Nuclear Information System (INIS)

Palmer, Karen; Paul, Anthony; Woerman, Matt; Steinberg, Daniel C.

2011-01-01

Three types of policies that are prominent in the federal debate over addressing greenhouse gas emissions in the United States are a cap-and-trade program (CTP) on emissions, a renewable portfolio standard (RPS) for electricity production, and tax credits for renewable electricity producers. Each of these policies would have different consequences, and combinations of these policies could induce interactions yielding a whole that is not the sum of its parts. This paper utilizes the Haiku electricity market model to evaluate the economic and technology outcomes, climate benefits, and cost-effectiveness of three such policies and all possible combinations of the policies. A central finding is that the carbon dioxide (CO 2 ) emissions reductions from CTP can be significantly greater than those from the other policies, even for similar levels of renewable electricity production, since of the three policies, CTP is the only one that distinguishes electricity generated by coal and natural gas. It follows that CTP is the most cost-effective among these approaches at reducing CO 2 emissions. An alternative compliance payment mechanism in an RPS program could substantially affect renewables penetration, and the electricity price effects of the policies hinge partly on the regulatory structure of electricity markets, which varies across the country. - Research highlights: → Climate benefits of cap-and-trade are greater than of tax credits or RPS. → Cap-and-trade is more cost-effective at reducing emissions than tax credits or RPS. → Tax credits are a subsidy to production that raises electricity consumption. → Alternative compliance payment can substantially affect the outcome of RPS.

Alternative solutions for inhibiting Legionella in domestic hot water systems based on low-temperature district heating

DEFF Research Database (Denmark)

Yang, Xiaochen; Li, Hongwei; Svendsen, Svend

2015-01-01

Abstract District heating is a cost-effective way of providing heat to high heat density areas. Low-temperature district heating (LTDH) is a promising way to make district heating more energy-efficient and adaptable to well-insulated buildings with low heating demand in the future. However, one c...... systems. They have the additional benefit of reducing the heat loss of the hot water system. The alternative design solutions both enrich our options for water sanitation and improve the energy efficiency of our energy systems....... concern is the multiplication of Legionella due to insufficient temperature elevation with low-temperature supply. The aim of this study was to find optimal solutions to this dilemma for specific situations. The solutions were of two types: alternative system designs and various methods of sterilization...... methods, thermal treatment, ionization, chlorine, chlorine dioxide, ultraviolet light, photocatalysis and filtration are discussed as the most frequently used methods in hot water systems. The characteristics, efficacy and operation methods of LTDH using the solutions investigated are documented...

Dynamic evaluation of the levelized cost of wind power generation

International Nuclear Information System (INIS)

Díaz, Guzmán; Gómez-Aleixandre, Javier; Coto, José

2015-01-01

Highlights: • Conventional levelized cost of energy is static and does not consider flexibility. • This paper defines a dynamic version by means of stochastic programming. • A penalty for early exercising is proposed to differentiate static and dynamic. • Results show the effects of feed-in tariff support in low wind sites. • Policy implications are derived on the basis of the static and dynamic measures. - Abstract: This paper discusses an alternative computation method of the levelized cost of energy of distributed wind power generators. Unlike in the conventional procedures, it includes time of commencement as an optimization variable. For that purpose, a methodology from Longstaff and Schwartz’s dynamic program for pricing financial American options is derived, which provides the ability to find the optimum time and value while coping with uncertainty revenues from energy sales and variable capital costs. The results obtained from the analysis of wind records of 50 sites entail that the conventional levelized cost of energy can be broken down into an optimum, minimum (time-dependent) value and a penalty for early exercising, which can be employed to define investment strategies and support policies

Personal carbon trading: A policy ahead of its time?

International Nuclear Information System (INIS)

Fawcett, Tina

2010-01-01

In 2008, the UK government undertook a review of personal carbon trading (PCT) and declared that it was 'an idea currently ahead of its time'. PCT is a radical policy proposal which would entail all adults receiving an equal, tradable carbon allowance to cover emissions from household energy and/or personal travel. The allowance would reduce over time, in line with national emissions reduction goals. The government's key concerns about PCT were its social unacceptability and high cost. This paper reviews the literature and identifies knowledge gaps, and then discusses whether these concerns are justified. Contrary to the government's conclusions, most research shows PCT to be at least as socially acceptable as an alternative taxation policy. People think it could be both fair and effective. Set-up and running costs for PCT will undoubtedly be higher than for alternative taxation policies. However, PCT could deliver benefits from individual and social change motivated by non-economic aspects of the policy. These potential benefits are outlined here. The conclusion is that PCT is a promising and timely policy idea.

Using the Kaldor-Hicks Tableau Format for Cost-Benefit Analysis and Policy Evaluation

Science.gov (United States)

Krutilla, Kerry

2005-01-01

This note describes the Kaldor-Hicks (KH) tableau format as a framework for distributional accounting in cost-benefit analysis and policy evaluation. The KH tableau format can serve as a heuristic aid for teaching microeconomics-based policy analysis, and offer insight to policy analysts and decisionmakers beyond conventional efficiency analysis.

Characterization of a Large, Low-Cost 3D Scanner

Directory of Open Access Journals (Sweden)

Jeremy Straub

2015-01-01

Full Text Available Imagery-based 3D scanning can be performed by scanners with multiple form factors, ranging from small and inexpensive scanners requiring manual movement around a stationary object to large freestanding (nearly instantaneous units. Small mobile units are problematic for use in scanning living creatures, which may be unwilling or unable to (or for the very young and animals, unaware of the need to hold a fixed position for an extended period of time. Alternately, very high cost scanners that can capture a complete scan within a few seconds are available, but they are cost prohibitive for some applications. This paper seeks to assess the performance of a large, low-cost 3D scanner, presented in prior work, which is able to concurrently capture imagery from all around an object. It provides the capabilities of the large, freestanding units at a price point akin to the smaller, mobile ones. This allows access to 3D scanning technology (particularly for applications requiring instantaneous imaging at a lower cost. Problematically, prior analysis of the scanner’s performance was extremely limited. This paper characterizes the efficacy of the scanner for scanning both inanimate objects and humans. Given the importance of lighting to visible light scanning systems, the scanner’s performance under multiple lighting configurations is evaluated, characterizing its sensitivity to lighting design.

Policies with Varying Costs and Benefits: A Land Conservation Classroom Game

Science.gov (United States)

Dissanayake, Sahan T. M.; Jacobson, Sarah A.

2016-01-01

Some policies try to maximize net benefits by targeting different individuals to participate. This is difficult when costs and benefits of participation vary independently, such as in land conservation. The authors share a classroom game that explores cases in which minimizing costs may not maximize benefits and vice versa. The game is a…

Cost-effectiveness of reducing emissions from tropical deforestation, 2016-2050

Science.gov (United States)

Busch, Jonah; Engelmann, Jens

2017-12-01

Reducing tropical deforestation is potentially a large-scale and low-cost strategy for mitigating climate change. Yet previous efforts to project the cost-effectiveness of policies to reduce greenhouse gas emissions from future deforestation across the tropics were hampered by crude available data on historical forest loss. Here we use recently available satellite-based maps of annual forest loss between 2001-2012, along with information on topography, accessibility, protected status, potential agricultural revenue, and an observed inverted-U-shaped relationship between forest cover loss and forest cover, to project tropical deforestation from 2016-2050 under alternative policy scenarios and to construct new marginal abatement cost curves for reducing emissions from tropical deforestation. We project that without new forest conservation policies 289 million hectares of tropical forest will be cleared from 2016-2050, releasing 169 GtCO2. A carbon price of US20/tCO2 (50/tCO2) across tropical countries would avoid 41 GtCO2 (77 GtCO2) from 2016-2050. By comparison, we estimate that Brazil’s restrictive policies in the Amazon between 2004-2012 successfully decoupled potential agricultural revenue from deforestation and reduced deforestation by 47% below what would have otherwise occurred, preventing the emission of 5.2 GtCO2. All tropical countries enacting restrictive anti-deforestation policies as effective as those in the Brazilian Amazon between 2004-2012 would avoid 58 GtCO2 from 2016-2050.

Flexible Workplace Policies: Lessons from the Federal Alternative Work Schedules Act

Science.gov (United States)

Liechty, Janet M.; Anderson, Elaine A.

2007-01-01

This case study uses a feminist framework to examine the 7-year process by which the Federal Alternative Work Schedules Act (1978-1985) became law and the reasons for reenergized implementation in the 1990s. We analyze the legislative discourse for rationale in support of and opposition to this policy, connect findings to current flexible work…

Low-Cost Behavioral Nudges Increase Medicaid Take-Up Among Eligible Residents Of Oregon.

Science.gov (United States)

Wright, Bill J; Garcia-Alexander, Ginny; Weller, Margarette A; Baicker, Katherine

2017-05-01

Efforts to reduce the ranks of the uninsured hinge on take-up of available programs and subsidies, but take-up of even free insurance is often less than complete. The evidence of the effectiveness of policies aiming to increase take-up is limited. We used a randomized controlled design to evaluate the impact of improved communication and behaviorally informed "nudges" designed to increase Medicaid take-up among eligible populations. Fielding randomized interventions in two different study populations in Oregon, we found that even very low-cost interventions substantially increased enrollment. Effects were larger in a population whose members had already expressed interest in obtaining coverage, but the effects were more persistent in low-income populations whose members were already enrolled in other state assistance programs but had not expressed interest in health insurance. The effects were similar across different demographic groups. Our results suggest that improving the design of enrollment processes and using low-cost mass-outreach efforts have the potential to substantially increase insurance coverage of vulnerable populations. Project HOPE—The People-to-People Health Foundation, Inc.

Low-Cost energy contraption design using playground seesaw

Science.gov (United States)

Banlawe, I. A. P.; Acosta, N. J. E. L.

2017-05-01

The study was conducted at Western Philippines University, San Juan, Aborlan, Palawan. The study used the mechanical motion of playground seesaw as a means to produce electrical energy. The study aimed to design a low-cost prototype energy contraption using playground seesaw using locally available and recycled materials, to measure the voltage, current and power outputs produced at different situations and estimate the cost of the prototype. Using principle of pneumatics, two hand air pumps were employed on the two end sides of the playground seesaw and the mechanical motion of the seesaw up and down produces air that is used to rotate a DC motor to produce electrical energy. This electricity can be utilized for powering basic or low-power appliances. There were two trials of testing, each trial tests the different pressure level of the air tank and tests the opening of on-off valve (Full open and half open) when the compressed air was released. Results showed that all pressure level at full open produced significantly higher voltage, than the half open. However, the mean values of the current and power produced in all pressure level at full and half open have negligible variation. These results signify that the energy contraption using playground seesaw is an alternative viable source of electrical energy in the playgrounds, parks and other places and can be used as an auxiliary or back-up source for electricity.

Thin film solar modules: the low cost, high throughput and versatile alternative to Si wafers

Energy Technology Data Exchange (ETDEWEB)

Hegedus, S. [Delaware Univ., Inst. of Energy Conversion, Newark, DE (United States)

2006-07-01

Thin film solar cells (TFSC) have passed adolescence and are ready to make a substantial contribution to the world's electricity generation. They can have advantages over c-Si solar modules in ease of large area, lower cost manufacturing and in several types of applications. Factors which limit TFSC module performance relative to champion cell performance are discussed along with the importance of increased throughput and yield. The consensus of several studies is that all TFSC can achieve costs below 1 $/W if manufactured at sufficiently large scale >100 MW using parallel lines of cloned equipment with high material utilization and spray-on encapsulants. There is significant new commercial interest in TFSC from small investors and large corporations, validating the thin film approach. Unique characteristics are discussed which give TFSC an advantage over c-Si in two specific markets: small rural solar home systems and building integrated photovoltaic installations. TFSC have outperformed c-Si in annual energy production (kWhrs/kW), have demonstrated outdoor durability comparable to c-Si and are being used in MW scale installations worldwide. The merits of the thin film approach cannot be judged on the basis of efficiency alone but must also account for module performance and potential for low cost. TFSC advocates should promote their unique virtues compared to c-Si: lower cost, higher kWhr/kW output, higher battery charging current, attractive visual appearance, flexible substrates, long-term stability comparable to c-Si, and multiple pathways for deposition with room for innovation and evolutionary improvement. There is a huge market for TFSC even at today's efficiency if costs can be reduced. A brief window of opportunity exists for TFSC over the next few years due the Si shortage. The demonstrated capabilities and advantages of TFSC must be proclaimed more persistently to funding decision-makers and customers without minimizing the remaining

A Cost Effectiveness Analysis of Salt Reduction Policies to Reduce Coronary Heart Disease in Four Eastern Mediterranean Countries

Science.gov (United States)

Mason, Helen; Shoaibi, Azza; Ghandour, Rula; O'Flaherty, Martin; Capewell, Simon; Khatib, Rana; Jabr, Samer; Unal, Belgin; Sözmen, Kaan; Arfa, Chokri; Aissi, Wafa; Romdhane, Habiba Ben; Fouad, Fouad; Al-Ali, Radwan; Husseini, Abdullatif

2014-01-01

Background Coronary Heart Disease (CHD) is rising in middle income countries. Population based strategies to reduce specific CHD risk factors have an important role to play in reducing overall CHD mortality. Reducing dietary salt consumption is a potentially cost-effective way to reduce CHD events. This paper presents an economic evaluation of population based salt reduction policies in Tunisia, Syria, Palestine and Turkey. Methods and Findings Three policies to reduce dietary salt intake were evaluated: a health promotion campaign, labelling of food packaging and mandatory reformulation of salt content in processed food. These were evaluated separately and in combination. Estimates of the effectiveness of salt reduction on blood pressure were based on a literature review. The reduction in mortality was estimated using the IMPACT CHD model specific to that country. Cumulative population health effects were quantified as life years gained (LYG) over a 10 year time frame. The costs of each policy were estimated using evidence from comparable policies and expert opinion including public sector costs and costs to the food industry. Health care costs associated with CHDs were estimated using standardized unit costs. The total cost of implementing each policy was compared against the current baseline (no policy). All costs were calculated using 2010 PPP exchange rates. In all four countries most policies were cost saving compared with the baseline. The combination of all three policies (reducing salt consumption by 30%) resulted in estimated cost savings of $235,000,000 and 6455 LYG in Tunisia; $39,000,000 and 31674 LYG in Syria; $6,000,000 and 2682 LYG in Palestine and $1,3000,000,000 and 378439 LYG in Turkey. Conclusion Decreasing dietary salt intake will reduce coronary heart disease deaths in the four countries. A comprehensive strategy of health education and food industry actions to label and reduce salt content would save both money and lives. PMID:24409297

Geotechnical reduction of void ratio in low-level radioactive waste burial sites: treatment alternatives

International Nuclear Information System (INIS)

Phillips, S.J.; Carlson, R.A.; McGuire, H.E.

1981-01-01

A substantial quantity of low-level radioactive and hazardous wastes has been interred in shallow land burial structures throughout the United States. Many of these structures (trenches, pits, and landfills) have proven to be unstable. Some surface feature manifestations such as large cracks, basins, and cave-ins are caused by voids filling and physico-chemical degradation and solubilization of the buried wastes which could result in the release of contamination. The surface features represent a potential for increased contamination transport to the biosphere via water, air, biologic, and direct pathways. Engineering alternatives for the reduction of buried waste and matrix materials voids are identified and discussed. As a guideline, a reduction of the voids within the waste to 80% or more of maximum relative dry density (a measure of in situ voids within the waste) is proposed. The advantages, disadvantages, and costs of each alternative are evaluated. Falling mass and pile driving engineering alternatives were selected for further development

Low-cost satellite mechanical design and construction

Science.gov (United States)

Boisjolie-Gair, Nathaniel; Straub, Jeremy

2017-05-01

This paper presents a discussion of techniques for low-cost design and construction of a CubeSat mechanical structure that can serve as a basis for academic programs and a starting point for government, military and commercial large-scale sensing networks, where the cost of each node must be minimized to facilitate system affordability and lower the cost and associated risk of losing any node. Spacecraft Design plays a large role in manufacturability. An intentionally simplified mechanical design is presented which reduces machining costs, as compared to more intricate designs that were considered. Several fabrication approaches are evaluated relative to the low-cost goal.

Doctors commitment and long-term effectiveness for cost containment policies: lesson learned from biosimilar drugs

Directory of Open Access Journals (Sweden)

Menditto E

2015-11-01

Full Text Available Enrica Menditto,1 Valentina Orlando,1 Silvia Coretti,2 Daria Putignano,1 Denise Fiorentino,1 Matteo Ruggeri2 1CIRFF, Center of Pharmacoeconomics, Federico II University of Naples, Naples, 2Postgraduate School of Health Economics and Management (ALTEMS, Università Cattolica del Sacro Cuore, School of Economics, Rome, Italy Background: Agency is a pervasive feature of the health care market, with doctors acting as agents for both patients and the health care system. In a context of scarce resources, doctors are required to take opportunity cost into account when prescribing treatments, while cost containment policies cannot overlook their active role in determining health care resource allocation. This paper addresses this issue, investigating the effects of cost containment measures in the market of biosimilar drugs that represent a viable and cost-saving strategy for the reduction of health care expenditure. The analysis focuses on a particular region in Italy, where several timely policies to incentivize biosimilar prescribing were launched. Methods: Drugs were identified by the anatomical therapeutic chemical classification system. Information about biosimilar drugs and their originator biological products was extracted from the IMS Health regional database. Drug consumption was expressed in terms of counting units, while expenditure was evaluated in Euro (€.The market penetration of biosimilars was analyzed by year and quarterly. Results: In the Campania region of Italy, the effects of cost containment policies, launched between 2009 and 2013, showed the prescription of biosimilars strongly increasing in 2010 until prescribing levels reached and exceeded the market share of the reference biological products in 2012. After a slight reduction, a plateau was observed at the beginning of 2013. At the same time, the use of the originator products had been decreasing until the first quarter of 2011. However, after a 1-year plateau, this trend

Status of costing hospital nursing work within Australian casemix activity-based funding policy.

Science.gov (United States)

Heslop, Liza

2012-02-01

Australia has a long history of patient level costing initiated when casemix funding was implemented in several states in the early 1990s. Australia includes, to some extent, hospital payment based on nursing intensity adopted within casemix funding policy and the Diagnostic Related Group system. Costing of hospital nursing services in Australia has not changed significantly in the last few decades despite widespread introduction of casemix funding policy at the state level. Recent Commonwealth of Australia National Health Reform presents change to the management of the delivery of health care including health-care costing. There is agreement for all Australian jurisdictions to progress to casemix-based activity funding. Within this context, nurse costing infrastructure presents contemporary issues and challenges. An assessment is made of the progress of costing nursing services within casemix funding models in Australian hospitals. Valid and reliable Australian-refined nursing service weights might overcome present cost deficiencies and limitations. © 2012 Blackwell Publishing Asia Pty Ltd.

Impact of different national biomass policies on investment costs of biomass district heating plants. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-04-01

The BIO-COST project - co-ordinated by E.V.A. - was funded by the European Commission's THERMIE Type B Programme. The objective of BIO-COST was to analyse the impact of national biomass policies on the investment costs of biomass district heating (DH) plants. The European comparison should help identifying measures to reduce investment costs for biomass DH plants and/or components down to a 'best practice' level. The investigation is based on the comparison of 20 biomass DH plants by country, with Denmark and Sweden having mainly high energy taxes as driver, while Austria and France rely mainly on subsidy systems. The results of BIO-COST show, that governmental policies can have a big impact especially on grid and buildings costs, effecting of course the overall costs of the plant enormously. Emission standards have their effects especially on the costs for technical equipment, however, this fact was not reflected in the BIO-COST data. The results do not show a clear advantage of either the energy tax approach or the subsidy approach: The French subsidy approach leads to fairly low cost levels compared to the Danish tax approach, while the Swedish tax approach seems to yield the lowest cost level. On the other hand the Austrian subsidy approach seems to intercrease investment costs. In principle both the tax as the subsidy approach can lead to the same effect: a project is calculated in such a way, that it just meets economic breakeven. This is typically the case when the project is not carried out by a private enterprise but by an operator aiming at enhanced public welfare (e.g. co-operative, municipality). In this case a subsidy model might yield more possibilities to encourage an economically efficient development, than a tax. Instead of giving subsidies as a fixed percentage of investments they could be adjusted to the actual needs of the project as proven by a standardised calculation. Of course this can create the incentive to expect higher

Addressing 2030 EU policy framework for energy and climate: Cost, risk and energy security issues

International Nuclear Information System (INIS)

Llano-Paz, Fernando de; Martínez Fernandez, Paulino; Soares, Isabel

2016-01-01

The different energy sources, their costs and impacts on the environment determine the electricity production process. Energy planning must solve the existence of uncertainty through the diversification of power generation technologies portfolio. The European Union energy and environmental policy has been mainly based on promoting the security of supply, efficiency, energy savings and the promotion of Renewable Energy Sources. The recent European Commission communication “Towards an European Energy Union: A secure, sustainable, competitive and affordable energy for every European” establishes the path for the European future. This study deals with the analysis of the latest EU “Energy Union” goals through the application of Markowitz portfolio theory considering technological real assets. The EU targets are assessed under a double perspective: economic and environmental. The model concludes that implementing a high share of Renewable Energy target in the design of European Policies is not relevant: the maximization of Renewable Energy share could be achieved considering a sole Low Emissions of carbon dioxide policy. Additionally it is confirmed the need of Nuclear energy in 2030: a zero nuclear energy share in 2030 European Mix is not possible, unless the technological limits participation for Renewable Energy Sources were increased. - Highlights: • Implementing a high RES share target in European Policies could not be relevant. • Maximizing RES share could be achieved considering a sole Low Emissions policy. • The EU 2030 Nuclear energy 50% shutting down could be feasible. • Minimizing risk portfolio presents high diversification and energy security levels.

Environmental cost-effectiveness analysis in intertemporal natural resource policy: evaluation of selective fishing gear.

Science.gov (United States)

Kronbak, Lone Grønbæk; Vestergaard, Niels

2013-12-15

In most decision-making involving natural resources, the achievements of a given policy (e.g., improved ecosystem or biodiversity) are rather difficult to measure in monetary units. To address this problem, the current paper develops an environmental cost-effectiveness analysis (ECEA) to include intangible benefits in intertemporal natural resource problems. This approach can assist managers in prioritizing management actions as least cost solutions to achieve quantitative policy targets. The ECEA framework is applied to a selective gear policy case in Danish mixed trawl fisheries in Kattegat and Skagerrak. The empirical analysis demonstrates how a policy with large negative net benefits might be justified if the intangible benefits are included. Copyright © 2013 Elsevier Ltd. All rights reserved.

Without true leadership and ownership, alternative energies will not succeed : the need for policy creation and renewal at the federal, provincial and municipal level

Energy Technology Data Exchange (ETDEWEB)

Thomsen, V. [St. Lawrence College, Kingston, ON (Canada)

2003-08-01

Most of the power generated in Eastern Ontario comes from the fossil-fired Lennox Generating Station, plus nuclear power from the Darlington plant near Toronto. Limited local power generation is provided by small hydro plants on the Rideau River system. Ontario provincial policy has favoured the expansion of nuclear power, to the detriment of all other sources. This has resulted in billions of dollars invested in the Greater Toronto Area and western Ontario. Investors are now gaining interest in cost-competitive renewable energy sources as energy industries face greater competition and increased environmental regulation. However, investment in renewable energy sources is not happening because of slow implementation and poorly thought-out processes. The author emphasized that the success of future alternative energy policies lies in partnerships where interested parties can work mutually to effect policy and political change. The International Energy Agency has stated that in the past 5 years, prices for renewable energies have become cost competitive with fossil technologies, but a long-term strategy and policy framework is needed to ensure that the full potential of renewable energy is not bypassed. The changes that are underway within the energy sector should be led by new policies that reflect social, economic and environmental priorities. It was suggested that Canada should follow the example of the European Union and require that a specific percentage of generation must come from renewable energy sources. 4 refs.

High-resolution modeling of the western North American power system demonstrates low-cost and low-carbon futures

International Nuclear Information System (INIS)

Nelson, James; Johnston, Josiah; Mileva, Ana; Fripp, Matthias; Hoffman, Ian; Petros-Good, Autumn; Blanco, Christian; Kammen, Daniel M.

2012-01-01

Decarbonizing electricity production is central to reducing greenhouse gas emissions. Exploiting intermittent renewable energy resources demands power system planning models with high temporal and spatial resolution. We use a mixed-integer linear programming model – SWITCH – to analyze least-cost generation, storage, and transmission capacity expansion for western North America under various policy and cost scenarios. Current renewable portfolio standards are shown to be insufficient to meet emission reduction targets by 2030 without new policy. With stronger carbon policy consistent with a 450 ppm climate stabilization scenario, power sector emissions can be reduced to 54% of 1990 levels by 2030 using different portfolios of existing generation technologies. Under a range of resource cost scenarios, most coal power plants would be replaced by solar, wind, gas, and/or nuclear generation, with intermittent renewable sources providing at least 17% and as much as 29% of total power by 2030. The carbon price to induce these deep carbon emission reductions is high, but, assuming carbon price revenues are reinvested in the power sector, the cost of power is found to increase by at most 20% relative to business-as-usual projections. - Highlights: ► Intermittent generation necessitates high-resolution electric power system models. ► We apply the SWITCH planning model to the western North American grid. ► We explore carbon policy and resource cost scenarios through 2030. ► As the carbon price rises, coal generation is replaced with solar, wind, gas and/or nuclear generation ► A 450 ppm climate stabilization target can be met at a 20% or lower cost increase.

Cost-effectiveness of public-health policy options in the presence of pretreatment NNRTI drug resistance in sub-Saharan Africa: A modelling study

NARCIS (Netherlands)

A. Phillips (Andrew); V. Cambiano (Valentina); F. Nakagawa (Fumiyo); P. Revill (Paul); M.R. Jordan (Michael); T.B. Hallett (Timothy); M.C. Doherty (Meg); A. de Luca (Andrea); Lundgren, J.D. (Jens D.); Mhangara, M. (Mutsa); Apollo, T. (Tsitsi); J.W. Mellors (John W.); B.E. Nichols (Brooke); Parikh, U. (Urvi); D. Pillay (Deenan); T.F. Rinke de Wit (Tobias); K.C. Sigaloff (Kim); Havlir, D. (Diane); D.R. Kuritzkes (Daniel); A. Pozniak (Anton); D.A.M.C. van de Vijver (David); M. Vitoria (Marco); Wainberg, M.A. (Mark A.); E. Raizes (Elliot); S. Bertagnolio (Silvia)

2017-01-01

textabstractBackground: There is concern over increasing prevalence of non-nucleoside reverse-transcriptase inhibitor (NNRTI) resistance in people initiating antiretroviral therapy (ART) in low-income and middle-income countries. We assessed the effectiveness and cost-effectiveness of alternative

The Canadian Government perspective on cost-effective regulation

International Nuclear Information System (INIS)

Martin, J.K.; Iwankow, C.

1996-01-01

Fiscal constraint, globalization of markets, and accelerated technological change have resulted in a new focus on the cost-effectiveness of government activities and, in turn, on methods of policy evaluation. An exploration of regulatory problems, and the use of regulation as a public policy instrument, reveals a commonalty of experience in all industrialized countries. This paper provides a brief synopsis of the Government of Canada's perspective on cost-effective regulation. To understand cost-effective regulation, this paper examines the principles of regulatory reform which underlie the current strategy of the federal government (collaborative decision-making mechanisms., methods of clear policy evaluation, and well defined lines of accountability). It discusses the nature of, and rationale for, government regulation, the reasons for regulatory reform in the economy, and the principal aims of Canadian regulatory reform and regulatory policy assessment. It does so by specifically addressing the role of cost-benefit analysis in the process of regulatory assessment - a method which involves systematically identifying, and quantifying where possible, the social benefits and costs associated with alternative public policy actions - with a particular focus on regulation which affects the Canadian nuclear industry. (author). 51 refs

The Canadian Government perspective on cost-effective regulation

Energy Technology Data Exchange (ETDEWEB)

Martin, J K; Iwankow, C [Treasury Board of Canada Secretariat, Ottawa, ON (Canada)

1997-12-31

Fiscal constraint, globalization of markets, and accelerated technological change have resulted in a new focus on the cost-effectiveness of government activities and, in turn, on methods of policy evaluation. An exploration of regulatory problems, and the use of regulation as a public policy instrument, reveals a commonalty of experience in all industrialized countries. This paper provides a brief synopsis of the Government of Canada`s perspective on cost-effective regulation. To understand cost-effective regulation, this paper examines the principles of regulatory reform which underlie the current strategy of the federal government (collaborative decision-making mechanisms., methods of clear policy evaluation, and well defined lines of accountability). It discusses the nature of, and rationale for, government regulation, the reasons for regulatory reform in the economy, and the principal aims of Canadian regulatory reform and regulatory policy assessment. It does so by specifically addressing the role of cost-benefit analysis in the process of regulatory assessment - a method which involves systematically identifying, and quantifying where possible, the social benefits and costs associated with alternative public policy actions - with a particular focus on regulation which affects the Canadian nuclear industry. (author). 51 refs.

The Cost-Effectiveness of Low-Cost Essential Antihypertensive Medicines for Hypertension Control in China: A Modelling Study.

Directory of Open Access Journals (Sweden)

Dongfeng Gu

2015-08-01

Full Text Available Hypertension is China's leading cardiovascular disease risk factor. Improved hypertension control in China would result in result in enormous health gains in the world's largest population. A computer simulation model projected the cost-effectiveness of hypertension treatment in Chinese adults, assuming a range of essential medicines list drug costs.The Cardiovascular Disease Policy Model-China, a Markov-style computer simulation model, simulated hypertension screening, essential medicines program implementation, hypertension control program administration, drug treatment and monitoring costs, disease-related costs, and quality-adjusted life years (QALYs gained by preventing cardiovascular disease or lost because of drug side effects in untreated hypertensive adults aged 35-84 y over 2015-2025. Cost-effectiveness was assessed in cardiovascular disease patients (secondary prevention and for two blood pressure ranges in primary prevention (stage one, 140-159/90-99 mm Hg; stage two, ≥160/≥100 mm Hg. Treatment of isolated systolic hypertension and combined systolic and diastolic hypertension were modeled as a reduction in systolic blood pressure; treatment of isolated diastolic hypertension was modeled as a reduction in diastolic blood pressure. One-way and probabilistic sensitivity analyses explored ranges of antihypertensive drug effectiveness and costs, monitoring frequency, medication adherence, side effect severity, background hypertension prevalence, antihypertensive medication treatment, case fatality, incidence and prevalence, and cardiovascular disease treatment costs. Median antihypertensive costs from Shanghai and Yunnan province were entered into the model in order to estimate the effects of very low and high drug prices. Incremental cost-effectiveness ratios less than the per capita gross domestic product of China (11,900 international dollars [Int$] in 2015 were considered cost-effective. Treating hypertensive adults with prior

An alternative non-vacuum and low cost ESAVD method for the deposition of Cu(In,Ga)Se{sub 2} absorber layers

Energy Technology Data Exchange (ETDEWEB)

Wang, Mingqing; Liu, Junpeng; Choy, KwangLeong [UCL Centre for Materials Discovery, University College London (United Kingdom); Hou, Xianghui [Faculty of Engineering, University of Nottingham (United Kingdom); Gibson, Paul [IMPT Ltd, Nottingham (United Kingdom); Salem, Elhamali; Koutsogeorgis, Demosthenes; Cranton, Wayne [School of Science and Technology, Nottingham Trent University (United Kingdom)

2015-01-01

In this article, an environmentally friendly and non-vacuum electrostatic spray assisted vapor deposition (ESAVD) process has been developed as an alternative and low cost method to deposit CIGS absorber layers. ESAVD is a non-vacuum chemical vapor deposition based process whereby a mixture of chemical precursors is atomized to form aerosol. The aerosol is charged and directed towards a heated substrate where it would undergo decomposition and chemical reaction to deposit a stable solid film onto the substrate. A sol containing copper, indium, and gallium salts, as well as thiourea was formulated into a homogeneous chemical precursor mixture for the deposition of CIGS films. After selenization, both XRD and Raman results show the presence of the characteristic peaks of CIGSSe in the fabricated thin films. From SEM images and XRF results, it can be seen that the deposited absorbers are promising for good performance solar cells. The fabricated solar cell with a typical structure of glass/Mo/CIGSSe/CdS/i-ZnO/ITO shows efficiency of 2.82% under 100 mW cm{sup -2} AM1.5 illumination. (copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Low Cost Integrated Navigation System for Unmanned Vessel

Directory of Open Access Journals (Sweden)

Yang Changsong

2017-11-01

Full Text Available Large errors of low-cost MEMS inertial measurement unit (MIMU lead to huge navigation errors, even wrong navigation information. An integrated navigation system for unmanned vessel is proposed. It consists of a low-cost MIMU and Doppler velocity sonar (DVS. This paper presents an integrated navigation method, to improve the performance of navigation system. The integrated navigation system is tested using simulation and semi-physical simulation experiments, whose results show that attitude, velocity and position accuracy has improved awfully, giving exactly accurate navigation results. By means of the combination of low-cost MIMU and DVS, the proposed system is able to overcome fast drift problems of the low cost IMU.

Preliminary siting criteria for the proposed mixed and low-level waste treatment facility at the Idaho National Engineering Laboratory

International Nuclear Information System (INIS)

Jorgenson-Waters, M.

1992-09-01

The Mixed and Low-Level Waste Treatment Facility project was established in 1991 by the US Department of Energy Idaho Field Office. This facility will provide treatment capabilities for Idaho National Engineering Laboratory (INEL) low-level mixed waste and low-level waste. This report identifies the siting requirements imposed on facilities that treat and store these waste types by Federal and State regulatory agencies and the US Department of Energy. Site selection criteria based on cost, environmental, health and safety, archeological, geological and service, and support requirements are presented. These criteria will be used to recommend alternative sites for the new facility. The National Environmental Policy Act process will then be invoked to evaluate the alternatives and the alternative sites and make a final site determination

Cost-effectiveness of planned birth in a birth centre compared with alternative planned places of birth: Results of the Dutch Birth Centre study

NARCIS (Netherlands)

M.F. Hitzert (Marit); M.A.A. Hermus (Marieke A.A.); Boesveld, I.I.C. (Inge I.C.); A. Franx (Arie); K.M. van der Pal-De Bruin (Karin); E.A.P. Steegers (Eric); Van Den Akker-Van Marle, E.M.E. (Eiske M.E.)

2017-01-01

textabstractObjectives To estimate the cost-effectiveness of a planned birth in a birth centre compared with alternative planned places of birth for low-risk women. In addition, a distinction has been made between different types of locations and integration profiles of birth centres. Design

Cost-effective policy instruments for greenhouse gas emission reduction and fossil fuel substitution through bioenergy production in Austria

International Nuclear Information System (INIS)

Schmidt, Johannes; Leduc, Sylvain; Dotzauer, Erik; Schmid, Erwin

2011-01-01

Climate change mitigation and security of energy supply are important targets of Austrian energy policy. Bioenergy production based on resources from agriculture and forestry is an important option for attaining these targets. To increase the share of bioenergy in the energy supply, supporting policy instruments are necessary. The cost-effectiveness of these instruments in attaining policy targets depends on the availability of bioenergy technologies. Advanced technologies such as second-generation biofuels, biomass gasification for power production, and bioenergy with carbon capture and storage (BECCS) will likely change the performance of policy instruments. This article assesses the cost-effectiveness of energy policy instruments, considering new bioenergy technologies for the year 2030, with respect to greenhouse gas emission (GHG) reduction and fossil fuel substitution. Instruments that directly subsidize bioenergy are compared with instruments that aim at reducing GHG emissions. A spatially explicit modeling approach is used to account for biomass supply and energy distribution costs in Austria. Results indicate that a carbon tax performs cost-effectively with respect to both policy targets if BECCS is not available. However, the availability of BECCS creates a trade-off between GHG emission reduction and fossil fuel substitution. Biofuel blending obligations are costly in terms of attaining the policy targets. - Highlights: → Costs of energy policies and effects on reduction of CO 2 emissions and fossil fuel consumption. → Particular focus on new bioenergy production technologies such as second generation biofuels. → Spatially explicit techno-economic optimization model. → CO 2 tax: high costs for reducing fossil fuel consumption if carbon capture and storage is available. → Biofuel policy: no significant reductions in CO 2 emissions or fossil fuel consumption.

Economic analysis of alternative LLW disposal methods

International Nuclear Information System (INIS)

Foutes, C.E.; Queenan, C.J. III

1987-01-01

The Environmental Protection Agency (EPA) has evaluated the costs and benefits of alternative disposal technologies as part of its program to develop generally applicable environmental standards for the land disposal of low-level radioactive waste (LLW). Costs, population health effects and Critical Population Group (CPG) exposures resulting from alternative waste treatment and disposal methods were evaluated both in absolute terms and also relative to a base case (current practice). Incremental costs of the standard included costs for packaging, processing, transportation, and burial of waste. Benefits are defined in terms of reductions in the general population health risk (expected fatal cancers and genetic effects) evaluated over 10,000 years. A cost-effectiveness ratio, defined as the incremental cost per avoided health effect, was calculated for each alternative standard. The cost-effectiveness analysis took into account a number of waste streams, hydrogeologic and climatic region settings, and waste treatment and disposal methods. This paper describes the alternatives considered and preliminary results of the cost-effectiveness analysis. 15 references, 7 figures, 3 tables

76 FR 70037 - Federal Regulations; OMB Circulars, OFPP Policy Letters, and CASB Cost Accounting Standards...

Science.gov (United States)

2011-11-10

... Circulars, OFPP Policy Letters, and CASB Cost Accounting Standards Included in the Semiannual Agenda of..., and Cost Accounting Standards Board (CASB) Cost Accounting Standards. DATES: The withdrawal is...

Edible Cricothyrotomy Model: A Low-Cost Alternative to Pig Tracheas and Plastic Models for Teaching Cricothyrotomy

Directory of Open Access Journals (Sweden)

Robert J Bryant

2017-01-01

, Interquartile Range [IQR] 24-41 sec and PM (median 33 sec, IQR 28-39 sec than on the EC (44 sec, IQR 35-63. There was a statistically significant divergence in preference (p=0.0001 with participants rating the PT first (median rank 1, IQR 1-1, the EC second (median rank 2, IQR 2-2, and the PM third (median rank 3, IQR 2.5-3. Cost of the models at the time of analysis (October, 2104 was $2.77 for EC and $7.64 for PT. The plastic model was built from materials obtained in the emergency department (ventilator tubing, 4-inch white foam tape, ½ inch white tape, and Coban. These materials were not purchased, so cost per plastic model was not calculated. Conclusion: A novel, edible cricothyrotomy training model is a suitable and cost effective alternative to a pig trachea and has a role for learners seeking multiple attempts at the procedure for skills maintenance and retention.

Doctors commitment and long-term effectiveness for cost containment policies: lesson learned from biosimilar drugs.

Science.gov (United States)

Menditto, Enrica; Orlando, Valentina; Coretti, Silvia; Putignano, Daria; Fiorentino, Denise; Ruggeri, Matteo

2015-01-01

Agency is a pervasive feature of the health care market, with doctors acting as agents for both patients and the health care system. In a context of scarce resources, doctors are required to take opportunity cost into account when prescribing treatments, while cost containment policies cannot overlook their active role in determining health care resource allocation. This paper addresses this issue, investigating the effects of cost containment measures in the market of biosimilar drugs that represent a viable and cost-saving strategy for the reduction of health care expenditure. The analysis focuses on a particular region in Italy, where several timely policies to incentivize biosimilar prescribing were launched. Drugs were identified by the anatomical therapeutic chemical classification system. Information about biosimilar drugs and their originator biological products was extracted from the IMS Health regional database. Drug consumption was expressed in terms of counting units, while expenditure was evaluated in Euro (€). The market penetration of biosimilars was analyzed by year and quarterly. In the Campania region of Italy, the effects of cost containment policies, launched between 2009 and 2013, showed the prescription of biosimilars strongly increasing in 2010 until prescribing levels reached and exceeded the market share of the reference biological products in 2012. After a slight reduction, a plateau was observed at the beginning of 2013. At the same time, the use of the originator products had been decreasing until the first quarter of 2011. However, after a 1-year plateau, this trend was reversed, with a new increase in the consumption of the originators observed. Results show that the cost containment policies, applied to cut health expenditure "to cure and not to care", did not produce the cultural change necessary to make these policies effective in the long run. Therefore, top-down policies for cost containment are not successful; rather, a bottom

Visions of Alternative (Unpredictable Futures and Their Use in Policy Analysis

Directory of Open Access Journals (Sweden)

Robert Costanza

2000-07-01

Full Text Available The most critical task facing humanity today is the creation of a shared vision of a sustainable and desirable society, one that can provide permanent prosperity within the biophysical constraints of the real world in a way that is fair and equitable to all of humanity, to other species, and to future generations. Recent work with businesses and communities indicates that creating a shared vision is the most effective engine for change in the desired direction, yet most effort in "futures modeling" has focused on extrapolating past trends rather than envisioning alternative futures. Science and economics as applied to policy are in conflict more often over alternative visions of the world than purely "scientific" disagreements. Likewise, governance has gotten bogged down in mediating short term conflicts between special interests rather than its more basic role of creating broadly shared visions that can guide dispute resolution. This paper addresses the question of what policies are most appropriate for society now, given alternative visions of the future and the enormous uncertainty about the reality of the assumptions underlying these visions. Four specific visions are laid out as being representative of the major alternatives. For each vision the benefits of achieving the vision, the assumptions that would have to be true in order for it to be achieved, and the implications of it being attempted but not achieved are explored. It is argued that dealing with uncertainty about the nature of the world, its carrying capacity for humans, the impacts of climate change, and other aspects of its future can best be done at this level of future visions and assumptions, not at more detailed levels (like the parameter uncertainty in models. Application of this vision/uncertainty analysis can help us both to design the future society we want and to maximize the chances of our getting there safely.

Toward a low-cost gait analysis system for clinical and free-living assessment.

Science.gov (United States)

Ladha, Cassim; Del Din, Silvia; Nazarpour, Kianoush; Hickey, Aodhan; Morris, Rosie; Catt, Michael; Rochester, Lynn; Godfrey, Alan

2016-08-01

Gait is an important clinical assessment tool since changes in gait may reflect changes in general health. Measurement of gait is a complex process which has been restricted to bespoke clinical facilities until recently. The use of inexpensive wearable technologies is an attractive alternative and offers the potential to assess gait in any environment. In this paper we present the development of a low cost analysis gait system built using entirely open source components. The system is used to capture spatio-temporal gait characteristics derived from an existing conceptual model, sensitive to ageing and neurodegenerative pathology (e.g. Parkinson's disease). We demonstrate the system is suitable for use in a clinical unit and will lead to pragmatic use in a free-living (home) environment. The system consists of a wearable (tri-axial accelerometer and gyroscope) with a Raspberry Pi module for data storage and analysis. This forms ongoing work to develop gait as a low cost diagnostic in modern healthcare.

Development of a low-cost cellulase production process using Trichoderma reesei for Brazilian biorefineries.

Science.gov (United States)

Ellilä, Simo; Fonseca, Lucas; Uchima, Cristiane; Cota, Junio; Goldman, Gustavo Henrique; Saloheimo, Markku; Sacon, Vera; Siika-Aho, Matti

2017-01-01

During the past few years, the first industrial-scale cellulosic ethanol plants have been inaugurated. Although the performance of the commercial cellulase enzymes used in this process has greatly improved over the past decade, cellulases still represent a very significant operational cost. Depending on the region, transport of cellulases from a central production facility to a biorefinery may significantly add to enzyme cost. The aim of the present study was to develop a simple, cost-efficient cellulase production process that could be employed locally at a Brazilian sugarcane biorefinery. Our work focused on two main topics: growth medium formulation and strain improvement. We evaluated several Brazilian low-cost industrial residues for their potential in cellulase production. Among the solid residues evaluated, soybean hulls were found to display clearly the most desirable characteristics. We engineered a Trichoderma reesei strain to secrete cellulase in the presence of repressing sugars, enabling the use of sugarcane molasses as an additional carbon source. In addition, we added a heterologous β-glucosidase to improve the performance of the produced enzymes in hydrolysis. Finally, the addition of an invertase gene from Aspegillus niger into our strain allowed it to consume sucrose from sugarcane molasses directly. Preliminary cost analysis showed that the overall process can provide for very low-cost enzyme with good hydrolysis performance on industrially pre-treated sugarcane straw. In this study, we showed that with relatively few genetic modifications and the right growth medium it is possible to produce considerable amounts of well-performing cellulase at very low cost in Brazil using T. reesei . With further enhancements and optimization, such a system could provide a viable alternative to delivered commercial cellulases.

A cost effectiveness analysis of salt reduction policies to reduce coronary heart disease in four Eastern Mediterranean countries.

Directory of Open Access Journals (Sweden)

Helen Mason

Full Text Available BACKGROUND: Coronary Heart Disease (CHD is rising in middle income countries. Population based strategies to reduce specific CHD risk factors have an important role to play in reducing overall CHD mortality. Reducing dietary salt consumption is a potentially cost-effective way to reduce CHD events. This paper presents an economic evaluation of population based salt reduction policies in Tunisia, Syria, Palestine and Turkey. METHODS AND FINDINGS: Three policies to reduce dietary salt intake were evaluated: a health promotion campaign, labelling of food packaging and mandatory reformulation of salt content in processed food. These were evaluated separately and in combination. Estimates of the effectiveness of salt reduction on blood pressure were based on a literature review. The reduction in mortality was estimated using the IMPACT CHD model specific to that country. Cumulative population health effects were quantified as life years gained (LYG over a 10 year time frame. The costs of each policy were estimated using evidence from comparable policies and expert opinion including public sector costs and costs to the food industry. Health care costs associated with CHDs were estimated using standardized unit costs. The total cost of implementing each policy was compared against the current baseline (no policy. All costs were calculated using 2010 PPP exchange rates. In all four countries most policies were cost saving compared with the baseline. The combination of all three policies (reducing salt consumption by 30% resulted in estimated cost savings of $235,000,000 and 6455 LYG in Tunisia; $39,000,000 and 31674 LYG in Syria; $6,000,000 and 2682 LYG in Palestine and $1,3000,000,000 and 378439 LYG in Turkey. CONCLUSION: Decreasing dietary salt intake will reduce coronary heart disease deaths in the four countries. A comprehensive strategy of health education and food industry actions to label and reduce salt content would save both money and lives.

Cost-effectiveness of planned birth in a birth centre compared with alternative planned places of birth: results of the Dutch Birth Centre study

NARCIS (Netherlands)

Hitzert, M.; Hermus, M.M.; Boesveld, I.I.; Franx, A.; Pal-de Bruin, K.K. van der; Steegers, E.E.; Akker-van Marle, E.M. van den

2017-01-01

Objectives To estimate the cost-effectiveness of a planned birth in a birth centre compared with alternative planned places of birth for low-risk women. In addition, a distinction has been made between different types of locations and integration profiles of birth centres. Design Economic evaluation

Cost-effectiveness of planned birth in a birth centre compared with alternative planned places of birth : Results of the Dutch Birth Centre study

NARCIS (Netherlands)

Hitzert, Marit F.; Hermus, Marieke A. A.; Boesveld, Inge I.C.; Franx, Arie; van der Pal-de Bruin, Karin M.; Steegers, Eric A. P.; Van Den Akker-Van Marle, Eiske M.E.

2017-01-01

Objectives To estimate the cost-effectiveness of a planned birth in a birth centre compared with alternative planned places of birth for low-risk women. In addition, a distinction has been made between different types of locations and integration profiles of birth centres. Design Economic evaluation

Institutional options for state management of low level radioactive waste

International Nuclear Information System (INIS)

Morris, F.A.

1981-01-01

This paper concerns ''institutional'' (legal, organizational, and political) aspects of low-level radioactive waste management. Its point of departure is the Low-Level Radioactive Waste Policy Act of 1980. With federal law and political consensus now behind the policy of state responsibility for low level waste, the question becomes, how is this new policy to be implemented. The questions of policy implementation are essentially institutional: What functions must a regional low level waste management system perform. What entities are capable of performing them. How well might various alternatives or combinations of alternatives work. This paper is a preliminary effort to address these questions. It discusses the basic functions that must be performed, and identifies the entities that could perform them, and discusses the workability of various alternative approaches

High SO{sub 2} removal duct injection: A low-cost FGD alternative

Energy Technology Data Exchange (ETDEWEB)

Nelson, S.G. [Sorbent Technologies Corp., Twinsburg, OH (United States)

1995-12-01

Sorbent Technologies Corporation, of the United States, is currently developing and demonstrating a new waste free, retrofitable, high-SO{sub 2} removal duct-injection process. Up to 85 percent SO{sub 2} removal is achieved by simply injecting a new dry lime-based sorbent into the flue-gas duct, collecting the sorbent downstream in a particulate collector, and then recycling the sorbent. By avoiding large, expensive components, the process can have low capital costs, making it especially appropriate for smaller, older, less-utilized plants. The key to the new technology is the use of sorbent supports. Supported sorbents are produced by coating hydrated lime onto inexpensive mineral supports, such as exfoliated vermiculite or perlite. Consequently, there are no liquid, sludge, or solid wastes with the new technology. Once saturated with SO{sub 2}, the spent sorbent can be easily pelletized into a valuable soil-conditioning agricultural by-product, for the sustainable development that the future requires. This paper describes Sorbent Technologies` pilot demonstration of supported sorbent injection at the Ohio Edison Company`s R.E. Burger station. The Burger effort is also the first demonstration of the Electric Power Research Institute`s new {open_quotes}COHPAC{close_quotes} baghouse technology in a sorbent-injection desulfurization application.

Recovery Act: Low Cost Integrated Substrate for OLED Lighting Development

Energy Technology Data Exchange (ETDEWEB)

Benton, Scott [PPG Industries, Inc., Pittsburgh, PA (United States); Bhandari, Abhinav [PPG Industries, Inc., Pittsburgh, PA (United States)

2012-12-26

PPG pursued the development of an integrated substrate, including the anode, external, and internal extraction layers. The objective of PPG's program was to achieve cost reductions by displacing the existing expensive borosilicate or double-side polished float glass substrates and developing alternative electrodes and scalable light extraction layer technologies through focused and short-term applied research. One of the key highlights of the project was proving the feasibility of using PPG's high transmission Solarphire® float glass as a substrate to consistently achieve organic lightemitting diode (OLED) devices with good performance and high yields. Under this program, four low-cost alternatives to the Indium Tin Oxide (ITO) anode were investigated using pilot-scale magnetron sputtered vacuum deposition (MSVD) and chemical vapor deposition (CVD) technologies. The anodes were evaluated by fabricating small and large phosphorescent organic lightemitting diode (PHOLED) devices at Universal Display Corporation (UDC). The device performance and life-times comparable to commercially available ITO anodes were demonstrated. A cost-benefit analysis was performed to down-select two anodes for further low-cost process development. Additionally, PPG developed and evaluated a number of scalable and compatible internal and external extraction layer concepts such as scattering layers on the outside of the glass substrate or between the transparent anode and the glass interface. In one external extraction layer (EEL) approach, sol-gel sprayed pyrolytic coatings were deposited using lab scale equipment by hand or automated spraying of sol-gel solutions on hot glass, followed by optimizing of scattering with minimal absorption. In another EEL approach, PPG tested large-area glass texturing by scratching a glass surface with an abrasive roller and acid etching. Efficacy enhancements of 1.27x were demonstrated using white PHOLED devices for 2.0mm substrates which are

Do low-cost ceramic water filters improve water security in rural South Africa?

Science.gov (United States)

Lange, Jens; Materne, Tineke; Grüner, Jörg

2016-10-01

This study examined the performance of a low-cost ceramic candle filter system (CCFS) for point of use (POU) drinking water treatment in the village of Hobeni, Eastern Cape Province, South Africa. CCFSs were distributed in Hobeni and a survey was carried out among their users. The performance of 51 CCFSs was evaluated by dip slides and related to human factors. Already after two-thirds of their specified lifetime, none of the distributed CCFSs produced water without distinct contamination, and more than one-third even deteriorated in hygienic water quality. Besides the water source (springs were preferable compared to river or rain water), a high water throughput was the dominant reason for poor CCFS performance. A stepwise laboratory test documented the negative effects of repeated loading and ambient field temperatures. These findings suggest that not every CCFS type per se guarantees improved drinking water security and that the efficiency of low-cost systems should continuously be monitored. For this purpose, dip slides were found to be a cost-efficient alternative to standard laboratory tests. They consistently underestimated microbial counts but can be used by laypersons and hence by the users themselves to assess critical contamination of their filter systems.

Characterization of low cost orally disintegrating film (ODF

Directory of Open Access Journals (Sweden)

Riana Jordao Barrozo Heinemann

Full Text Available Abstract Orally disintegrating films (ODF produced with a hydrophilic polymers are a thin and flexible material, wich disintegrate in contact with saliva and can vehicule bioactive materials. The aim of this study was to develop and characterize ODF formulation with potential to act as a carrier for different bioactives compounds prepared with low cost polymers. Gelatin (G, starch (S, carboxymethyl cellulose (CMC and their blends (G:S, CMC:S, CMC:G, and CMC:S:G were prepared by casting technique with sorbitol as a plasticizer. The formulations were characterized in terms of visual aspects, FTIR, SEM, mechanical characteristics, hygroscopicity, dissolution (in vitro and in vivo and swelling index. FTIR analysis revealed that no interaction between polymers in ODF was observed. By SEM, it was possible to observe differences on surfaces by different polymers. ODF made with CMC and CMC:G presented higher water absorption (P<0.05 and higher swelling index probably due to the higher water affinity by CMC. Formulations with G, CMC:G and CMC:S:G presented the highest values of tensile strength (P<0.05. ODF prepared with S alone presented the highest disintegration time, the others formulations showed in vitro dissolution ranging from 5.22 to 8.50 min, while in vivo dissolution time ranged from 2.15 to 3.38 min. By the formulations made with G and blend of G:S and CMC:S:G it is possible to develop a ODF of low cost with desired characteristics being an alternative vehicle to deliver functional compounds for continuous use.

Climate policy and energy-intensive manufacturing: A comprehensive analysis of the effectiveness of cost mitigation provisions in the American Energy and Security Act of 2009

International Nuclear Information System (INIS)

Bassi, Andrea M.; Yudken, Joel S.

2011-01-01

In response to the ongoing climate policy debates, this study examines the cost impacts of carbon-pricing legislation on selected US energy-intensive manufacturing industries. Specifically, it evaluates output-based rebate measures and the border adjustment provision specified in the bill, and tests the effectiveness of cost containment features of the policy, such as the international offsets, under various market assumptions. Results of the examination confirm that in all policy cases or industries, the output-based rebates would effectively mitigate the manufacturers' carbon-pricing costs in the short-to-medium term. However as the rebates decline after 2020, especially in a case where low-carbon electricity generation or international offsets are not readily available or implemented, these industries would suffer greater declines in profitability. At the same time, the study's findings were mixed concerning the effectiveness of the border adjustment measure in reducing cost impacts after 2020. While border adjustments could reduce costs to US manufacturing sectors, at least temporarily, they could create problems for domestic downstream producers and exports, under cost pass-along conditions. However at best, the output-based rebates, international offset, and border adjustment and measures primarily buy time for manufacturers. The only long-term solution is for EITE industries to invest in energy-saving and next-generation low-carbon technologies. - Highlights: → The output-based rebates would effectively mitigate the costs of carbon-pricing for EITE industries. → After 2021 economic impacts on the EITE industries would escalate. → The BA measure would support US firms passing through their emissions costs to their US customers. → The BA measure would not alleviate the higher production costs of US. EITE exports. → In the medium term the only true solution is for US. EITE manufacturers to invest in energy-saving technologies.

Evaluation of a Low-Cost Bubble CPAP System Designed for Resource-Limited Settings.

Science.gov (United States)

Bennett, Desmond J; Carroll, Ryan W; Kacmarek, Robert M

2018-04-01

Respiratory compromise is a leading contributor to global neonatal death. CPAP is a method of treatment that helps maintain lung volume during expiration, promotes comfortable breathing, and improves oxygenation. Bubble CPAP is an effective alternative to standard CPAP. We sought to determine the reliability and functionality of a low-cost bubble CPAP device designed for low-resource settings. The low-cost bubble CPAP device was compared to a commercially available bubble CPAP system. The devices were connected to a lung simulator that simulated neonates of 4 different weights with compromised respiratory mechanics (∼1, ∼3, ∼5, and ∼10 kg). The devices' abilities to establish and maintain pressure and flow under normal conditions as well as under conditions of leak were compared. Multiple combinations of pressure levels (5, 8, and 10 cm H 2 O) and flow levels (3, 6, and 10 L/min) were tested. The endurance of both devices was also tested by running the systems continuously for 8 h and measuring the changes in pressure and flow. Both devices performed equivalently during the no-leak and leak trials. While our testing revealed individual differences that were statistically significant and clinically important (>10% difference) within specific CPAP and flow-level settings, no overall comparisons of CPAP or flow were both statistically significant and clinically important. Each device delivered pressures similar to the desired pressures, although the flows delivered by both machines were lower than the set flows in most trials. During the endurance trials, the low-cost device was marginally better at maintaining pressure, while the commercially available device was better at maintaining flow. The low-cost bubble CPAP device evaluated in this study is comparable to a bubble CPAP system used in developed settings. Extensive clinical trials, however, are necessary to confirm its effectiveness. Copyright © 2018 by Daedalus Enterprises.

Climate change : expert opinion on the economics of policy options to address climate change

Science.gov (United States)

2008-05-01

Panelists identified key strengths and limitations of alternative policy approaches that should be of assistance to the Congress in weighing the potential benefits and costs of different policies for addressing climate change. Many panelists said tha...

A low-cost colorimeter.

Science.gov (United States)

Jones, N B; Riley, C; Sheya, M S; Hosseinmardi, M M

1984-01-01

A need for a colorimeter with low capital and maintenance costs has been suggested for countries with foreign exchange problems and no local medical instrumentation industry. This paper puts forward a design for such a device based on a domestic light-bulb, photographic filters and photovoltaic cells. The principle of the design is the use of a balancing technique involving twin light paths for test solution and reference solution and an electronic bridge circuit. It is shown that proper selection of the components will allow the cost objectives to be met and also provide acceptable linearity, precision, accuracy and repeatability.

The Welfare Costs of GHG Reduction with Renewable Energy Policies in the US

OpenAIRE

Khanna, Madhu; Oliver, Anthony

2013-01-01

A range of policies have been implemented in the agricultural, transportation, and electric power sectors, which comprise the majority of GHG emissions in the US. Two prominent policy sets are the national RFS and state-level RPSs. The purpose of this research is to examine the GHG implications of the state RPSs and their welfare costs of mitigating GHG emissions. We also analyze the interactions between the RFS and state RPS policies and the extent to which these policies create competition ...

Good things do not always come in threes: On the excess cost of overlapping regulation in EU climate policy

International Nuclear Information System (INIS)

Böhringer, Christoph; Keller, Andreas; Bortolamedi, Markus; Rahmeier Seyffarth, Anelise

2016-01-01

Since the mid-1990's the European Union (EU) aims at pushing global climate policy. The objective is to promote international cooperation by the adoption of substantial EU-wide greenhouse gas emission reduction targets and their least-cost implementation. Our quantitative impact assessment of the EU Climate and Energy Package shows that the myriad of instruments used in the EU to curb greenhouse gas emissions is doomed to generate substantial excess cost. We conclude that EU climate and energy policy should better disentangle its choices of objectives, targets, and policy instruments on rigorous economic grounds in order to improve the coherence and overall cost-effectiveness of policy initiatives. - Highlights: •EU Climate and Energy Package almost quintuples costs for EU-wide emission abatement. •The main source of excess cost of EU climate policy are energy efficiency mandates.

Thirteen Plus One. A Comparison of Global Climate Policy Architectures

International Nuclear Information System (INIS)

Aldy, J.E.; Barrett, S.; Stavins, R.N.

2003-07-01

We critically review the Kyoto Protocol and thirteen alternative policy architectures for addressing the threat of global climate change. We employ six criteria to evaluate the policy proposals: environmental outcome, dynamic efficiency, cost effectiveness, equity, flexibility in the presence of new information, and incentives for participation and compliance. The Kyoto Protocol does not fare well on a number of criteria, but none of the alternative proposals fare well along all six dimensions. We identify several major themes among the alternative proposals: Kyoto is t oo little, too fast ; developing countries should play a more substantial role and receive incentives to participate; implementation should focus on market-based approaches, especially those with price mechanisms; and participation and compliance incentives are inadequately addressed by most proposals. Our investigation reveals tensions among several of the evaluative criteria, such as between environmental outcome and efficiency, and between cost-effectiveness and incentives for participation and compliance

Thirteen plus one. A comparison of global climate policy architectures

International Nuclear Information System (INIS)

Aldy, Joseph E.; Barrett, Scott; Stavins, Robert N.

2003-01-01

We critically review the Kyoto Protocol and thirteen alternative policy architectures for addressing the threat of global climate change. We employ six criteria to evaluate the policy proposals: environmental outcome, dynamic efficiency, cost-effectiveness, equity, flexibility in the presence of new information, and incentives for participation and compliance. The Kyoto Protocol does not fare well on a number of criteria, but none of the alternative proposals fare well along all six dimensions. We identify several major themes among the alternative proposals: Kyoto is 'too little, too fast'; developing countries (DCs) should play a more substantial role and receive incentives to participate; implementation should focus on market-based approaches, especially those with price mechanisms; and participation and compliance incentives are inadequately addressed by most proposals. Our investigation reveals tensions among several of the evaluative criteria, such as between environmental outcome and efficiency, and between cost-effectiveness and incentives for participation and compliance

Low Cost/Low Noise Variable Pitch Ducted Fan, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — ACI proposes a design for a Propulsor (Low Cost/Low Noise Variable Pitch Ducted Fan) that has wide application in all sectors of Aviation. Propulsor hardware of this...

The cost-effectiveness of neonatal screening for Cystic Fibrosis: an analysis of alternative scenarios using a decision model

Directory of Open Access Journals (Sweden)

Tu Karen

2005-08-01

Full Text Available Abstract Background The use of neonatal screening for cystic fibrosis is widely debated in the United Kingdom and elsewhere, but the evidence available to inform policy is limited. This paper explores the cost-effectiveness of adding screening for cystic fibrosis to an existing routine neonatal screening programme for congenital hypothyroidism and phenylketonuria, under alternative scenarios and assumptions. Methods The study is based on a decision model comparing screening to no screening in terms of a number of outcome measures, including diagnosis of cystic fibrosis, life-time treatment costs, life years and QALYs gained. The setting is a hypothetical UK health region without an existing neonatal screening programme for cystic fibrosis. Results Under initial assumptions, neonatal screening (using an immunoreactive trypsin/DNA two stage screening protocol costs £5,387 per infant diagnosed, or £1.83 per infant screened (1998 costs. Neonatal screening for cystic fibrosis produces an incremental cost-effectiveness of £6,864 per QALY gained, in our base case scenario (an assumed benefit of a 6 month delay in the emergence of symptoms. A difference of 11 months or more in the emergence of symptoms (and mean survival means neonatal screening is both less costly and produces better outcomes than no screening. Conclusion Neonatal screening is expensive as a method of diagnosis. Neonatal screening may be a cost-effective intervention if the hypothesised delays in the onset of symptoms are confirmed. Implementing both antenatal and neonatal screening would undermine potential economic benefits, since a reduction in the birth incidence of cystic fibrosis would reduce the cost-effectiveness of neonatal screening.

Cost-efficient demand-pull policies for multi-purpose technologies – The case of stationary electricity storage

International Nuclear Information System (INIS)

Battke, Benedikt; Schmidt, Tobias S.

2015-01-01

Highlights: • A definition of multi-purpose technologies (MPTs) is proposed. • Opportunities for a cost-efficient demand-pull policy strategy for MPTs are derived. • The multi-purpose character of stationary electricity storage (SES) is shown. • An exemplary profitability assessment of one SES technology supports the argument. - Abstract: Stationary electricity storage technologies (SES) allow to increase the shares of intermittent renewable energy technologies in electricity networks. As SES currently exhibit high costs, policy makers have started introducing demand-pull policies in order to foster their diffusion and drive these technologies further down the learning curve. However, as observed in the case of renewable energy technologies, demand-pull policies for technologies can come at high costs in cases where the profitability gap that needs to be covered by the policy support is large. Yet, SES can create value in multiple distinct applications in the power system – making it a “multi-purpose technology”. We argue that policy makers can make use of the multi-purpose character of SES to limit costs of demand-pull policies. We propose a policy strategy which grants support based on the profitability gap in the different applications, thereby moving down the learning curve efficiently. To support our argumentation, we firstly conduct a comprehensive literature review of SES applications exemplifying the multi-purpose character of these technologies. Second, we assess the profitability of one SES technology (vanadium redox flow battery) in five SES applications, highlighting a strong variation of the profitability gap across these applications

Comparative evaluation of low cost materials as constructed wetland filling media

Science.gov (United States)

Pinho, Henrique J. O.; Vaz, Mafalda M.; Mateus, Dina M. R.

2017-11-01

Three waste materials from civil construction activities were assessed as low cost alternative filling materials used in Constructed Wetlands (CW). CW are green processes for wastewater treatment, whose design includes an appropriate selection of vegetation and filling material. The sustainability of such processes may be incremented using recovered wastes as filling materials. The abilities of the materials to support plant growth and to contribute to pollutants removal from wastewater were assessed and compared to expanded clay, a filling usually used in CW design. Statistical analysis, using one-way ANOVA and Welch's ANOVA, demonstrate that limestone fragments are a better choice of filling material than brick fragments and basalt gravel.

Evaluating public policy instruments in the Greek building sector

International Nuclear Information System (INIS)

Spyridaki, Niki-Artemis; Banaka, Stefania; Flamos, Alexandros

2016-01-01

This paper applies a multi-criteria analysis (MCA) to evaluate public policy mechanisms that foster energy efficiency and renewable energy sources in the Greek building sector, based on stakeholders’ understanding and perceptions of the functionality of policy instruments. The objective is to shed light on the implementation of currently employed policy mechanisms that aim to achieve the 2020 energy savings targets and beyond, providing useful information to policy makers for future policy (re-) formulations. In this framework, policy instruments were evaluated against process-related criteria, such as implementation costs, distributional effects, and coherence of policy processes, so as to highlight successful policy practices during their implementation phase as well as to unveil cases of policy underperformance or unintended policy outcomes. To hedge uncertainties related to policy instrument selection, the method employs probabilistic evaluations of every alternative against each criterion. The MCA results showed that the country is still missing significant energy saving opportunities that could be reached through more streamlined implementation practices and political support. In times of fiscal crisis, the Greek government should also revitalize the implementation of alternative funding mechanisms and support policy alternatives such as green public procurement, voluntary agreements, and energy performance contracting. - Highlights: • We apply an MCA analysis to evaluate EE and RES policies instruments. • We focus on the implementation stage through qualitative criteria and ordinal scales. • We use the probabilistic evaluations of each alternative against each criterion. • We provide rankings of instruments according to process related criteria. • Greece should revitalize the implementation of funding mechanisms, GPP and VAs.

The Cost-Effectiveness of Three Screening Alternatives for People with Diabetes with No or Early Diabetic Retinopathy

Science.gov (United States)

Rein, David B; Wittenborn, John S; Zhang, Xinzhi; Allaire, Benjamin A; Song, Michael S; Klein, Ronald; Saaddine, Jinan B

2011-01-01

Objective To determine whether biennial eye evaluation or telemedicine screening are cost-effective alternatives to current recommendations for the estimated 10 million people aged 30–84 with diabetes but no or minimal diabetic retinopathy. Data Sources United Kingdom Prospective Diabetes Study, National Health and Nutrition Examination Survey, American Academy of Ophthalmology Preferred Practice Patterns, Medicare Payment Schedule. Study Design Cost-effectiveness Monte Carlo simulation. Data Collection/Extraction Methods Literature review, analysis of existing surveys. Principal Findings Biennial eye evaluation was the most cost-effective treatment option when the ability to detect other eye conditions was included in the model. Telemedicine was most cost-effective when other eye conditions were not considered or when telemedicine was assumed to detect refractive error. The current annual eye evaluation recommendation was costly compared with either treatment alternative. Self-referral was most cost-effective up to a willingness to pay (WTP) of U.S.$37,600, with either biennial or annual evaluation most cost-effective at higher WTP levels. Conclusions Annual eye evaluations are costly and add little benefit compared with either plausible alternative. More research on the ability of telemedicine to detect other eye conditions is needed to determine whether it is more cost-effective than biennial eye evaluation. PMID:21492158

Evaluating alternative prescribed burning policies to reduce net economic damages from wildfire

Science.gov (United States)

D. Evan Mercer; Jeffrey P. Prestemon; David T. Butry; John M. Pye

2007-01-01

We estimate a wildfire risk model with a new measure of wildfire output, intensity-weighted risk and use it in Monte Carlo simulations to estimate welfare changes from alternative prescribed burning policies. Using Volusia County, Florida as a case study, an annual prescribed burning rate of 13% of all forest lands maximizes net welfare; ignoring the effects on...